Merge branch 'master' of git://1984.lsi.us.es/net-next-2.6

Conflicts:
	net/ipv4/route.c

Signed-off-by: Patrick McHardy <kaber@trash.net>

5245 files changed, 321561 insertions, 168224 deletions

diff --git a/.mailmap b/.mailmap
index a62e6a84fd1..581fd39193a 100644
--- a/.mailmap
+++ b/.mailmap
@@ -105,3 +105,4 @@ Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
 Uwe Kleine-König <ukl@pengutronix.de>
 Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
 Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Takashi YOSHII <takashi.yoshii.zj@renesas.com>
diff --git a/CREDITS b/CREDITS
index 41d8e63d516..494b6e4746d 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2365,8 +2365,6 @@ E: acme@redhat.com
 W: http://oops.ghostprotocols.net:81/blog/
 P: 1024D/9224DF01 D5DF E3BB E3C8 BCBB F8AD  841A B6AB 4681 9224 DF01
 D: IPX, LLC, DCCP, cyc2x, wl3501_cs, net/ hacks
-S: R. Brasílio Itiberê, 4270/1010 - �gua Verde
-S: 80240-060 - Curitiba - Paraná
 S: Brazil
 
 N: Karsten Merker
diff --git a/Documentation/ABI/obsolete/proc-pid-oom_adj b/Documentation/ABI/obsolete/proc-pid-oom_adj
new file mode 100644
index 00000000000..cf63f264ce0
--- /dev/null
+++ b/Documentation/ABI/obsolete/proc-pid-oom_adj
@@ -0,0 +1,22 @@
+What:	/proc/<pid>/oom_adj
+When:	August 2012
+Why:	/proc/<pid>/oom_adj allows userspace to influence the oom killer's
+	badness heuristic used to determine which task to kill when the kernel
+	is out of memory.
+
+	The badness heuristic has since been rewritten since the introduction of
+	this tunable such that its meaning is deprecated.  The value was
+	implemented as a bitshift on a score generated by the badness()
+	function that did not have any precise units of measure.  With the
+	rewrite, the score is given as a proportion of available memory to the
+	task allocating pages, so using a bitshift which grows the score
+	exponentially is, thus, impossible to tune with fine granularity.
+
+	A much more powerful interface, /proc/<pid>/oom_score_adj, was
+	introduced with the oom killer rewrite that allows users to increase or
+	decrease the badness() score linearly.  This interface will replace
+	/proc/<pid>/oom_adj.
+
+	A warning will be emitted to the kernel log if an application uses this
+	deprecated interface.  After it is printed once, future warnings will be
+	suppressed until the kernel is rebooted.
diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd
new file mode 100644
index 00000000000..90a87e2a572
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-rbd
@@ -0,0 +1,83 @@
+What:		/sys/bus/rbd/
+Date:		November 2010
+Contact:	Yehuda Sadeh <yehuda@hq.newdream.net>,
+		Sage Weil <sage@newdream.net>
+Description:
+
+Being used for adding and removing rbd block devices.
+
+Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
+
+ $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
+
+The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
+will be assigned for any registered block device. If snapshot is used, it will
+be mapped read-only.
+
+Removal of a device:
+
+  $ echo <dev-id> > /sys/bus/rbd/remove
+
+Entries under /sys/bus/rbd/devices/<dev-id>/
+--------------------------------------------
+
+client_id
+
+	The ceph unique client id that was assigned for this specific session.
+
+major
+
+	The block device major number.
+
+name
+
+	The name of the rbd image.
+
+pool
+
+	The pool where this rbd image resides. The pool-name pair is unique
+	per rados system.
+
+size
+
+	The size (in bytes) of the mapped block device.
+
+refresh
+
+	Writing to this file will reread the image header data and set
+	all relevant datastructures accordingly.
+
+current_snap
+
+	The current snapshot for which the device is mapped.
+
+create_snap
+
+	Create a snapshot:
+
+	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
+
+rollback_snap
+
+	Rolls back data to the specified snapshot. This goes over the entire
+	list of rados blocks and sends a rollback command to each.
+
+	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
+
+snap_*
+
+	A directory per each snapshot
+
+
+Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
+-------------------------------------------------------------
+
+id
+
+	The rados internal snapshot id assigned for this snapshot
+
+size
+
+	The size of the image when this snapshot was taken.
+
+
diff --git a/Documentation/ABI/testing/sysfs-class-net-batman-adv b/Documentation/ABI/testing/sysfs-class-net-batman-adv
new file mode 100644
index 00000000000..38dd762def4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-batman-adv
@@ -0,0 +1,14 @@
+
+What:           /sys/class/net/<iface>/batman-adv/mesh_iface
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                The /sys/class/net/<iface>/batman-adv/mesh_iface file
+                displays the batman mesh interface this <iface>
+                currently is associated with.
+
+What:           /sys/class/net/<iface>/batman-adv/iface_status
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Indicates the status of <iface> as it is seen by batman.
diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
new file mode 100644
index 00000000000..748fe1701d2
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -0,0 +1,69 @@
+
+What:           /sys/class/net/<mesh_iface>/mesh/aggregated_ogms
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Indicates whether the batman protocol messages of the
+                mesh <mesh_iface> shall be aggregated or not.
+
+What:           /sys/class/net/<mesh_iface>/mesh/bonding
+Date:           June 2010
+Contact:        Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be sent using multiple interfaces at the
+                same time (if available).
+
+What:           /sys/class/net/<mesh_iface>/mesh/fragmentation
+Date:           October 2010
+Contact:        Andreas Langer <an.langer@gmx.de>
+Description:
+                Indicates whether the data traffic going through the
+                mesh will be fragmented or silently discarded if the
+                packet size exceeds the outgoing interface MTU.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the bandwidth which is propagated by this
+                node if gw_mode was set to 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_mode
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the state of the gateway features. Can be
+                either 'off', 'client' or 'server'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/gw_sel_class
+Date:           October 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the selection criteria this node will use
+                to choose a gateway if gw_mode was set to 'client'.
+
+What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Defines the interval in milliseconds in which batman
+                sends its protocol messages.
+
+What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
+Date:           Oct 2010
+Contact:        Linus Lüssing <linus.luessing@web.de>
+Description:
+		Defines the penalty which will be applied to an
+		originator message's tq-field on every hop.
+
+What:           /sys/class/net/<mesh_iface>/mesh/vis_mode
+Date:           May 2010
+Contact:        Marek Lindner <lindner_marek@yahoo.de>
+Description:
+                Each batman node only maintains information about its
+                own local neighborhood, therefore generating graphs
+                showing the topology of the entire mesh is not easily
+                feasible without having a central instance to collect
+                the local topologies from all nodes. This file allows
+                to activate the collecting (server) mode.
diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop
index 1d775390e85..41ff8ae4dee 100644
--- a/Documentation/ABI/testing/sysfs-platform-asus-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop
@@ -47,6 +47,20 @@ Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
-		Control the bluetooth device. 1 means on, 0 means off.
+		Control the wlan device. 1 means on, 0 means off.
 		This may control the led, the device or both.
 Users:		Lapsus
+
+What:		/sys/devices/platform/asus_laptop/wimax
+Date:		October 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wimax device. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/asus_laptop/wwan
+Date:		October 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Control the wwan (3G) device. 1 means on, 0 means off.
diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-wmi b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi
new file mode 100644
index 00000000000..e4b5fef5fad
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi
@@ -0,0 +1,10 @@
+What:		/sys/devices/platform/eeepc-wmi/cpufv
+Date:		Oct 2010
+KernelVersion:	2.6.37
+Contact:	"Corentin Chary" <corentincj@iksaif.net>
+Description:
+		Change CPU clock configuration (write-only).
+		There are three available clock configuration:
+		    * 0 -> Super Performance Mode
+		    * 1 -> High Performance Mode
+		    * 2 -> Power Saving Mode
diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty
new file mode 100644
index 00000000000..b138b663bf5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-tty
@@ -0,0 +1,19 @@
+What:		/sys/class/tty/console/active
+Date:		Nov 2010
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:
+		 Shows the list of currently configured
+		 console devices, like 'tty1 ttyS0'.
+		 The last entry in the file is the active
+		 device connected to /dev/console.
+		 The file supports poll() to detect virtual
+		 console switches.
+
+What:		/sys/class/tty/tty0/active
+Date:		Nov 2010
+Contact:	Kay Sievers <kay.sievers@vrfy.org>
+Description:
+		 Shows the currently active virtual console
+		 device, like 'tty1'.
+		 The file supports poll() to detect virtual
+		 console switches.
diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl
index 19a1210c253..03641a08e27 100644
--- a/Documentation/DocBook/80211.tmpl
+++ b/Documentation/DocBook/80211.tmpl
@@ -146,6 +146,7 @@
 !Finclude/net/cfg80211.h cfg80211_rx_mgmt
 !Finclude/net/cfg80211.h cfg80211_mgmt_tx_status
 !Finclude/net/cfg80211.h cfg80211_cqm_rssi_notify
+!Finclude/net/cfg80211.h cfg80211_cqm_pktloss_notify
 !Finclude/net/cfg80211.h cfg80211_michael_mic_failure
       </chapter>
       <chapter>
@@ -332,10 +333,16 @@
           <title>functions/definitions</title>
 !Finclude/net/mac80211.h ieee80211_rx_status
 !Finclude/net/mac80211.h mac80211_rx_flags
+!Finclude/net/mac80211.h mac80211_tx_control_flags
+!Finclude/net/mac80211.h mac80211_rate_control_flags
+!Finclude/net/mac80211.h ieee80211_tx_rate
 !Finclude/net/mac80211.h ieee80211_tx_info
+!Finclude/net/mac80211.h ieee80211_tx_info_clear_status
 !Finclude/net/mac80211.h ieee80211_rx
+!Finclude/net/mac80211.h ieee80211_rx_ni
 !Finclude/net/mac80211.h ieee80211_rx_irqsafe
 !Finclude/net/mac80211.h ieee80211_tx_status
+!Finclude/net/mac80211.h ieee80211_tx_status_ni
 !Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
 !Finclude/net/mac80211.h ieee80211_rts_get
 !Finclude/net/mac80211.h ieee80211_rts_duration
@@ -346,6 +353,7 @@
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues
 !Finclude/net/mac80211.h ieee80211_stop_queues
+!Finclude/net/mac80211.h ieee80211_queue_stopped
         </sect1>
       </chapter>
 
@@ -354,6 +362,13 @@
 !Pinclude/net/mac80211.h Frame filtering
 !Finclude/net/mac80211.h ieee80211_filter_flags
       </chapter>
+
+      <chapter id="workqueue">
+        <title>The mac80211 workqueue</title>
+!Pinclude/net/mac80211.h mac80211 workqueue
+!Finclude/net/mac80211.h ieee80211_queue_work
+!Finclude/net/mac80211.h ieee80211_queue_delayed_work
+      </chapter>
     </part>
 
     <part id="advanced">
@@ -374,6 +389,9 @@
 !Finclude/net/mac80211.h set_key_cmd
 !Finclude/net/mac80211.h ieee80211_key_conf
 !Finclude/net/mac80211.h ieee80211_key_flags
+!Finclude/net/mac80211.h ieee80211_tkip_key_type
+!Finclude/net/mac80211.h ieee80211_get_tkip_key
+!Finclude/net/mac80211.h ieee80211_key_removed
       </chapter>
 
       <chapter id="powersave">
@@ -417,6 +435,18 @@
           supported by mac80211, add notes about supporting hw crypto
           with it.
         </para>
+!Finclude/net/mac80211.h ieee80211_iterate_active_interfaces
+!Finclude/net/mac80211.h ieee80211_iterate_active_interfaces_atomic
+      </chapter>
+
+      <chapter id="station-handling">
+        <title>Station handling</title>
+        <para>TODO</para>
+!Finclude/net/mac80211.h ieee80211_sta
+!Finclude/net/mac80211.h sta_notify_cmd
+!Finclude/net/mac80211.h ieee80211_find_sta
+!Finclude/net/mac80211.h ieee80211_find_sta_by_ifaddr
+!Finclude/net/mac80211.h ieee80211_sta_block_awake
       </chapter>
 
       <chapter id="hardware-scan-offload">
@@ -424,6 +454,28 @@
         <para>TBD</para>
 !Finclude/net/mac80211.h ieee80211_scan_completed
       </chapter>
+
+      <chapter id="aggregation">
+        <title>Aggregation</title>
+        <sect1>
+          <title>TX A-MPDU aggregation</title>
+!Pnet/mac80211/agg-tx.c TX A-MPDU aggregation
+!Cnet/mac80211/agg-tx.c
+        </sect1>
+        <sect1>
+          <title>RX A-MPDU aggregation</title>
+!Pnet/mac80211/agg-rx.c RX A-MPDU aggregation
+!Cnet/mac80211/agg-rx.c
+        </sect1>
+!Finclude/net/mac80211.h ieee80211_ampdu_mlme_action
+      </chapter>
+
+      <chapter id="smps">
+        <title>Spatial Multiplexing Powersave (SMPS)</title>
+!Pinclude/net/mac80211.h Spatial multiplexing power save
+!Finclude/net/mac80211.h ieee80211_request_smps
+!Finclude/net/mac80211.h ieee80211_smps_mode
+      </chapter>
     </part>
 
     <part id="rate-control">
@@ -435,9 +487,16 @@
          interface and how it relates to mac80211 and drivers.
         </para>
       </partintro>
-      <chapter id="dummy">
-        <title>dummy chapter</title>
+      <chapter id="ratecontrol-api">
+        <title>Rate Control API</title>
         <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_start_tx_ba_session
+!Finclude/net/mac80211.h ieee80211_start_tx_ba_cb_irqsafe
+!Finclude/net/mac80211.h ieee80211_stop_tx_ba_session
+!Finclude/net/mac80211.h ieee80211_stop_tx_ba_cb_irqsafe
+!Finclude/net/mac80211.h rate_control_changed
+!Finclude/net/mac80211.h ieee80211_tx_rate_control
+!Finclude/net/mac80211.h rate_control_send_low
       </chapter>
     </part>
 
@@ -485,6 +544,13 @@
         </sect1>
       </chapter>
 
+      <chapter id="aggregation-internals">
+        <title>Aggregation</title>
+!Fnet/mac80211/sta_info.h sta_ampdu_mlme
+!Fnet/mac80211/sta_info.h tid_ampdu_tx
+!Fnet/mac80211/sta_info.h tid_ampdu_rx
+      </chapter>
+
       <chapter id="synchronisation">
         <title>Synchronisation</title>
         <para>TBD</para>
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index 22edcbb9dda..35447e08173 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -304,6 +304,10 @@ X!Idrivers/video/console/fonts.c
 !Edrivers/input/ff-core.c
 !Edrivers/input/ff-memless.c
      </sect1>
+     <sect1><title>Multitouch Library</title>
+!Iinclude/linux/input/mt.h
+!Edrivers/input/input-mt.c
+     </sect1>
      <sect1><title>Polled input devices</title>
 !Iinclude/linux/input-polldev.h
 !Edrivers/input/input-polldev.c
diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl
index d858d92cf6d..4a38f604fa6 100644
--- a/Documentation/DocBook/sh.tmpl
+++ b/Documentation/DocBook/sh.tmpl
@@ -79,10 +79,6 @@
       </sect2>
     </sect1>
   </chapter>
-  <chapter id="clk">
-    <title>Clock Framework Extensions</title>
-!Iinclude/linux/sh_clk.h
-  </chapter>
   <chapter id="mach">
     <title>Machine Specific Interfaces</title>
     <sect1 id="dreamcast">
diff --git a/Documentation/DocBook/uio-howto.tmpl b/Documentation/DocBook/uio-howto.tmpl
index 4d4ce0e61e4..b4665b9c40b 100644
--- a/Documentation/DocBook/uio-howto.tmpl
+++ b/Documentation/DocBook/uio-howto.tmpl
@@ -16,7 +16,7 @@
 	</orgname>
 
 	<address>
-	   <email>hjk@linutronix.de</email>
+	   <email>hjk@hansjkoch.de</email>
 	</address>
     </affiliation>
 </author>
@@ -114,7 +114,7 @@ GPL version 2.
 
 <para>If you know of any translations for this document, or you are
 interested in translating it, please email me
-<email>hjk@linutronix.de</email>.
+<email>hjk@hansjkoch.de</email>.
 </para>
 </sect1>
 
@@ -171,7 +171,7 @@ interested in translating it, please email me
 <title>Feedback</title>
 	<para>Find something wrong with this document? (Or perhaps something
 	right?) I would love to hear from you. Please email me at
-	<email>hjk@linutronix.de</email>.</para>
+	<email>hjk@hansjkoch.de</email>.</para>
 </sect1>
 </chapter>
 
diff --git a/Documentation/DocBook/v4l/func-ioctl.xml b/Documentation/DocBook/v4l/func-ioctl.xml
index 00f9690e1c2..b60fd37a629 100644
--- a/Documentation/DocBook/v4l/func-ioctl.xml
+++ b/Documentation/DocBook/v4l/func-ioctl.xml
@@ -34,8 +34,7 @@
       <varlistentry>
 	<term><parameter>request</parameter></term>
 	<listitem>
-	  <para>V4L2 ioctl request code as defined in the <link
-linkend="videodev">videodev.h</link> header file, for example
+	  <para>V4L2 ioctl request code as defined in the <filename>videodev2.h</filename> header file, for example
 VIDIOC_QUERYCAP.</para>
 	</listitem>
       </varlistentry>
@@ -57,7 +56,7 @@ file descriptor. An ioctl <parameter>request</parameter> has encoded
 in it whether the argument is an input, output or read/write
 parameter, and the size of the argument <parameter>argp</parameter> in
 bytes. Macros and defines specifying V4L2 ioctl requests are located
-in the <link linkend="videodev">videodev.h</link> header file.
+in the <filename>videodev2.h</filename> header file.
 Applications should use their own copy, not include the version in the
 kernel sources on the system they compile on. All V4L2 ioctl requests,
 their respective function and parameters are specified in <xref
diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml
index d7c46718709..cfffc88d738 100644
--- a/Documentation/DocBook/v4l/pixfmt.xml
+++ b/Documentation/DocBook/v4l/pixfmt.xml
@@ -142,8 +142,8 @@ leftmost pixel of the second row from the top, and so on. The last row
 has just as many pad bytes after it as the other rows.</para>
 
     <para>In V4L2 each format has an identifier which looks like
-<constant>PIX_FMT_XXX</constant>, defined in the <link
-linkend="videodev">videodev.h</link> header file. These identifiers
+<constant>PIX_FMT_XXX</constant>, defined in the <filename>videodev2.h</filename>
+header file. These identifiers
 represent <link linkend="v4l2-fourcc">four character codes</link>
 which are also listed below, however they are not the same as those
 used in the Windows world.</para>
diff --git a/Documentation/Makefile b/Documentation/Makefile
index 6fc7ea1d1f9..9b4bc5c76f3 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,3 +1,3 @@
 obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
 	filesystems/ filesystems/configfs/ ia64/ laptops/ networking/ \
-	pcmcia/ spi/ timers/ video4linux/ vm/ watchdog/src/
+	pcmcia/ spi/ timers/ vm/ watchdog/src/
diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt
index a851118775d..6a8c73f55b8 100644
--- a/Documentation/RCU/trace.txt
+++ b/Documentation/RCU/trace.txt
@@ -1,18 +1,22 @@
 CONFIG_RCU_TRACE debugfs Files and Formats
 
 
-The rcutree implementation of RCU provides debugfs trace output that
-summarizes counters and state.  This information is useful for debugging
-RCU itself, and can sometimes also help to debug abuses of RCU.
-The following sections describe the debugfs files and formats.
+The rcutree and rcutiny implementations of RCU provide debugfs trace
+output that summarizes counters and state.  This information is useful for
+debugging RCU itself, and can sometimes also help to debug abuses of RCU.
+The following sections describe the debugfs files and formats, first
+for rcutree and next for rcutiny.
 
 
-Hierarchical RCU debugfs Files and Formats
+CONFIG_TREE_RCU and CONFIG_TREE_PREEMPT_RCU debugfs Files and Formats
 
-This implementation of RCU provides three debugfs files under the
+These implementations of RCU provides five debugfs files under the
 top-level directory RCU: rcu/rcudata (which displays fields in struct
-rcu_data), rcu/rcugp (which displays grace-period counters), and
-rcu/rcuhier (which displays the struct rcu_node hierarchy).
+rcu_data), rcu/rcudata.csv (which is a .csv spreadsheet version of
+rcu/rcudata), rcu/rcugp (which displays grace-period counters),
+rcu/rcuhier (which displays the struct rcu_node hierarchy), and
+rcu/rcu_pending (which displays counts of the reasons that the
+rcu_pending() function decided that there was core RCU work to do).
 
 The output of "cat rcu/rcudata" looks as follows:
 
@@ -130,7 +134,8 @@ o	"ci" is the number of RCU callbacks that have been invoked for
 	been registered in absence of CPU-hotplug activity.
 
 o	"co" is the number of RCU callbacks that have been orphaned due to
-	this CPU going offline.
+	this CPU going offline.  These orphaned callbacks have been moved
+	to an arbitrarily chosen online CPU.
 
 o	"ca" is the number of RCU callbacks that have been adopted due to
 	other CPUs going offline.  Note that ci+co-ca+ql is the number of
@@ -168,12 +173,12 @@ o	"gpnum" is the number of grace periods that have started.  It is
 
 The output of "cat rcu/rcuhier" looks as follows, with very long lines:
 
-c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6 oqlen=0
+c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6
 1/1 .>. 0:127 ^0    
 3/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
 3/3f .>. 0:5 ^0    2/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3    
 rcu_bh:
-c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0 oqlen=0
+c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0
 0/1 .>. 0:127 ^0    
 0/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
 0/3f .>. 0:5 ^0    0/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3
@@ -212,11 +217,6 @@ o	"fqlh" is the number of calls to force_quiescent_state() that
 	exited immediately (without even being counted in nfqs above)
 	due to contention on ->fqslock.
 
-o	"oqlen" is the number of callbacks on the "orphan" callback
-	list.  RCU callbacks are placed on this list by CPUs going
-	offline, and are "adopted" either by the CPU helping the outgoing
-	CPU or by the next rcu_barrier*() call, whichever comes first.
-
 o	Each element of the form "1/1 0:127 ^0" represents one struct
 	rcu_node.  Each line represents one level of the hierarchy, from
 	root to leaves.  It is best to think of the rcu_data structures
@@ -326,3 +326,115 @@ o	"nn" is the number of times that this CPU needed nothing.  Alert
 	readers will note that the rcu "nn" number for a given CPU very
 	closely matches the rcu_bh "np" number for that same CPU.  This
 	is due to short-circuit evaluation in rcu_pending().
+
+
+CONFIG_TINY_RCU and CONFIG_TINY_PREEMPT_RCU debugfs Files and Formats
+
+These implementations of RCU provides a single debugfs file under the
+top-level directory RCU, namely rcu/rcudata, which displays fields in
+rcu_bh_ctrlblk, rcu_sched_ctrlblk and, for CONFIG_TINY_PREEMPT_RCU,
+rcu_preempt_ctrlblk.
+
+The output of "cat rcu/rcudata" is as follows:
+
+rcu_preempt: qlen=24 gp=1097669 g197/p197/c197 tasks=...
+             ttb=. btg=no ntb=184 neb=0 nnb=183 j=01f7 bt=0274
+             normal balk: nt=1097669 gt=0 bt=371 b=0 ny=25073378 nos=0
+             exp balk: bt=0 nos=0
+rcu_sched: qlen: 0
+rcu_bh: qlen: 0
+
+This is split into rcu_preempt, rcu_sched, and rcu_bh sections, with the
+rcu_preempt section appearing only in CONFIG_TINY_PREEMPT_RCU builds.
+The last three lines of the rcu_preempt section appear only in
+CONFIG_RCU_BOOST kernel builds.  The fields are as follows:
+
+o	"qlen" is the number of RCU callbacks currently waiting either
+	for an RCU grace period or waiting to be invoked.  This is the
+	only field present for rcu_sched and rcu_bh, due to the
+	short-circuiting of grace period in those two cases.
+
+o	"gp" is the number of grace periods that have completed.
+
+o	"g197/p197/c197" displays the grace-period state, with the
+	"g" number being the number of grace periods that have started
+	(mod 256), the "p" number being the number of grace periods
+	that the CPU has responded to (also mod 256), and the "c"
+	number being the number of grace periods that have completed
+	(once again mode 256).
+
+	Why have both "gp" and "g"?  Because the data flowing into
+	"gp" is only present in a CONFIG_RCU_TRACE kernel.
+
+o	"tasks" is a set of bits.  The first bit is "T" if there are
+	currently tasks that have recently blocked within an RCU
+	read-side critical section, the second bit is "N" if any of the
+	aforementioned tasks are blocking the current RCU grace period,
+	and the third bit is "E" if any of the aforementioned tasks are
+	blocking the current expedited grace period.  Each bit is "."
+	if the corresponding condition does not hold.
+
+o	"ttb" is a single bit.  It is "B" if any of the blocked tasks
+	need to be priority boosted and "." otherwise.
+
+o	"btg" indicates whether boosting has been carried out during
+	the current grace period, with "exp" indicating that boosting
+	is in progress for an expedited grace period, "no" indicating
+	that boosting has not yet started for a normal grace period,
+	"begun" indicating that boosting has bebug for a normal grace
+	period, and "done" indicating that boosting has completed for
+	a normal grace period.
+
+o	"ntb" is the total number of tasks subjected to RCU priority boosting
+	periods since boot.
+
+o	"neb" is the number of expedited grace periods that have had
+	to resort to RCU priority boosting since boot.
+
+o	"nnb" is the number of normal grace periods that have had
+	to resort to RCU priority boosting since boot.
+
+o	"j" is the low-order 12 bits of the jiffies counter in hexadecimal.
+
+o	"bt" is the low-order 12 bits of the value that the jiffies counter
+	will have at the next time that boosting is scheduled to begin.
+
+o	In the line beginning with "normal balk", the fields are as follows:
+
+	o	"nt" is the number of times that the system balked from
+		boosting because there were no blocked tasks to boost.
+		Note that the system will balk from boosting even if the
+		grace period is overdue when the currently running task
+		is looping within an RCU read-side critical section.
+		There is no point in boosting in this case, because
+		boosting a running task won't make it run any faster.
+
+	o	"gt" is the number of times that the system balked
+		from boosting because, although there were blocked tasks,
+		none of them were preventing the current grace period
+		from completing.
+
+	o	"bt" is the number of times that the system balked
+		from boosting because boosting was already in progress.
+
+	o	"b" is the number of times that the system balked from
+		boosting because boosting had already completed for
+		the grace period in question.
+
+	o	"ny" is the number of times that the system balked from
+		boosting because it was not yet time to start boosting
+		the grace period in question.
+
+	o	"nos" is the number of times that the system balked from
+		boosting for inexplicable ("not otherwise specified")
+		reasons.  This can actually happen due to races involving
+		increments of the jiffies counter.
+
+o	In the line beginning with "exp balk", the fields are as follows:
+
+	o	"bt" is the number of times that the system balked from
+		boosting because there were no blocked tasks to boost.
+
+	o	"nos" is the number of times that the system balked from
+		 boosting for inexplicable ("not otherwise specified")
+		 reasons.
diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index a2976a6de03..e9c77788a39 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -516,6 +516,7 @@ int main(int argc, char *argv[])
 			default:
 				fprintf(stderr, "Unknown nla_type %d\n",
 					na->nla_type);
+			case TASKSTATS_TYPE_NULL:
 				break;
 			}
 			na = (struct nlattr *) (GENLMSG_DATA(&msg) + len);
diff --git a/Documentation/arm/00-INDEX b/Documentation/arm/00-INDEX
index ecf7d04bca2..91c24a1e8a9 100644
--- a/Documentation/arm/00-INDEX
+++ b/Documentation/arm/00-INDEX
@@ -34,3 +34,5 @@ memory.txt
 	- description of the virtual memory layout
 nwfpe/
 	- NWFPE floating point emulator documentation
+swp_emulation
+	- SWP/SWPB emulation handler/logging description
diff --git a/Documentation/arm/OMAP/DSS b/Documentation/arm/OMAP/DSS
index 0af0e9eed5d..888ae7b83ae 100644
--- a/Documentation/arm/OMAP/DSS
+++ b/Documentation/arm/OMAP/DSS
@@ -255,9 +255,10 @@ framebuffer parameters.
 Kernel boot arguments
 ---------------------
 
-vram=<size>
-	- Amount of total VRAM to preallocate. For example, "10M". omapfb
-	  allocates memory for framebuffers from VRAM.
+vram=<size>[,<physaddr>]
+	- Amount of total VRAM to preallocate and optionally a physical start
+	  memory address. For example, "10M". omapfb allocates memory for
+	  framebuffers from VRAM.
 
 omapfb.mode=<display>:<mode>[,...]
 	- Default video mode for specified displays. For example,
diff --git a/Documentation/arm/OMAP/omap_pm b/Documentation/arm/OMAP/omap_pm
index 5389440aade..9012bb03909 100644
--- a/Documentation/arm/OMAP/omap_pm
+++ b/Documentation/arm/OMAP/omap_pm
@@ -127,3 +127,28 @@ implementation needs:
 10. (*pdata->cpu_set_freq)(unsigned long f)
 
 11. (*pdata->cpu_get_freq)(void)
+
+Customizing OPP for platform
+============================
+Defining CONFIG_PM should enable OPP layer for the silicon
+and the registration of OPP table should take place automatically.
+However, in special cases, the default OPP table may need to be
+tweaked, for e.g.:
+ * enable default OPPs which are disabled by default, but which
+   could be enabled on a platform
+ * Disable an unsupported OPP on the platform
+ * Define and add a custom opp table entry
+in these cases, the board file needs to do additional steps as follows:
+arch/arm/mach-omapx/board-xyz.c
+	#include "pm.h"
+	....
+	static void __init omap_xyz_init_irq(void)
+	{
+		....
+		/* Initialize the default table */
+		omapx_opp_init();
+		/* Do customization to the defaults */
+		....
+	}
+NOTE: omapx_opp_init will be omap3_opp_init or as required
+based on the omap family.
diff --git a/Documentation/arm/swp_emulation b/Documentation/arm/swp_emulation
new file mode 100644
index 00000000000..af903d22fd9
--- /dev/null
+++ b/Documentation/arm/swp_emulation
@@ -0,0 +1,27 @@
+Software emulation of deprecated SWP instruction (CONFIG_SWP_EMULATE)
+---------------------------------------------------------------------
+
+ARMv6 architecture deprecates use of the SWP/SWPB instructions, and recommeds
+moving to the load-locked/store-conditional instructions LDREX and STREX.
+
+ARMv7 multiprocessing extensions introduce the ability to disable these
+instructions, triggering an undefined instruction exception when executed.
+Trapped instructions are emulated using an LDREX/STREX or LDREXB/STREXB
+sequence. If a memory access fault (an abort) occurs, a segmentation fault is
+signalled to the triggering process.
+
+/proc/cpu/swp_emulation holds some statistics/information, including the PID of
+the last process to trigger the emulation to be invocated. For example:
+---
+Emulated SWP:		12
+Emulated SWPB:		0
+Aborted SWP{B}:		1
+Last process:		314
+---
+
+NOTE: when accessing uncached shared regions, LDREX/STREX rely on an external
+transaction monitoring block called a global monitor to maintain update
+atomicity. If your system does not implement a global monitor, this option can
+cause programs that perform SWP operations to uncached memory to deadlock, as
+the STREX operation will always fail.
+
diff --git a/Documentation/block/switching-sched.txt b/Documentation/block/switching-sched.txt
index d5af3f63081..71cfbdc0f74 100644
--- a/Documentation/block/switching-sched.txt
+++ b/Documentation/block/switching-sched.txt
@@ -16,7 +16,7 @@ you can do so by typing:
 As of the Linux 2.6.10 kernel, it is now possible to change the
 IO scheduler for a given block device on the fly (thus making it possible,
 for instance, to set the CFQ scheduler for the system default, but
-set a specific device to use the anticipatory or noop schedulers - which
+set a specific device to use the deadline or noop schedulers - which
 can improve that device's throughput).
 
 To set a specific scheduler, simply do this:
@@ -31,7 +31,7 @@ a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
 will be displayed, with the currently selected scheduler in brackets:
 
 # cat /sys/block/hda/queue/scheduler
-noop anticipatory deadline [cfq]
-# echo anticipatory > /sys/block/hda/queue/scheduler
+noop deadline [cfq]
+# echo deadline > /sys/block/hda/queue/scheduler
 # cat /sys/block/hda/queue/scheduler
-noop [anticipatory] deadline cfq
+noop [deadline] cfq
diff --git a/Documentation/development-process/2.Process b/Documentation/development-process/2.Process
index 97726eba610..911a4518634 100644
--- a/Documentation/development-process/2.Process
+++ b/Documentation/development-process/2.Process
@@ -154,7 +154,7 @@ The stages that a patch goes through are, generally:
    inclusion, it should be accepted by a relevant subsystem maintainer -
    though this acceptance is not a guarantee that the patch will make it
    all the way to the mainline.  The patch will show up in the maintainer's
-   subsystem tree and into the staging trees (described below).  When the
+   subsystem tree and into the -next trees (described below).  When the
    process works, this step leads to more extensive review of the patch and
    the discovery of any problems resulting from the integration of this
    patch with work being done by others.
@@ -236,7 +236,7 @@ finding the right maintainer.  Sending patches directly to Linus is not
 normally the right way to go.
 
 
-2.4: STAGING TREES
+2.4: NEXT TREES
 
 The chain of subsystem trees guides the flow of patches into the kernel,
 but it also raises an interesting question: what if somebody wants to look
@@ -250,7 +250,7 @@ changes land in the mainline kernel.  One could pull changes from all of
 the interesting subsystem trees, but that would be a big and error-prone
 job.
 
-The answer comes in the form of staging trees, where subsystem trees are
+The answer comes in the form of -next trees, where subsystem trees are
 collected for testing and review.  The older of these trees, maintained by
 Andrew Morton, is called "-mm" (for memory management, which is how it got
 started).  The -mm tree integrates patches from a long list of subsystem
@@ -275,7 +275,7 @@ directory at:
 Use of the MMOTM tree is likely to be a frustrating experience, though;
 there is a definite chance that it will not even compile.
 
-The other staging tree, started more recently, is linux-next, maintained by
+The other -next tree, started more recently, is linux-next, maintained by
 Stephen Rothwell.  The linux-next tree is, by design, a snapshot of what
 the mainline is expected to look like after the next merge window closes.
 Linux-next trees are announced on the linux-kernel and linux-next mailing
@@ -303,12 +303,25 @@ volatility of linux-next tends to make it a difficult development target.
 See http://lwn.net/Articles/289013/ for more information on this topic, and
 stay tuned; much is still in flux where linux-next is involved.
 
-Besides the mmotm and linux-next trees, the kernel source tree now contains
-the drivers/staging/ directory and many sub-directories for drivers or
-filesystems that are on their way to being added to the kernel tree
-proper, but they remain in drivers/staging/ while they still need more
-work.
-
+2.4.1: STAGING TREES
+
+The kernel source tree now contains the drivers/staging/ directory, where
+many sub-directories for drivers or filesystems that are on their way to
+being added to the kernel tree live.  They remain in drivers/staging while
+they still need more work; once complete, they can be moved into the
+kernel proper.  This is a way to keep track of drivers that aren't
+up to Linux kernel coding or quality standards, but people may want to use
+them and track development.
+
+Greg Kroah-Hartman currently (as of 2.6.36) maintains the staging tree.
+Drivers that still need work are sent to him, with each driver having
+its own subdirectory in drivers/staging/.  Along with the driver source
+files, a TODO file should be present in the directory as well.  The TODO
+file lists the pending work that the driver needs for acceptance into
+the kernel proper, as well as a list of people that should be Cc'd for any
+patches to the driver.  Staging drivers that don't currently build should
+have their config entries depend upon CONFIG_BROKEN.  Once they can
+be successfully built without outside patches, CONFIG_BROKEN can be removed.
 
 2.5: TOOLS
 
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index d9bcffd5943..470d3dba1a6 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -62,6 +62,10 @@ aic7*reg_print.c*
 aic7*seq.h*
 aicasm
 aicdb.h*
+altivec1.c
+altivec2.c
+altivec4.c
+altivec8.c
 asm-offsets.h
 asm_offsets.h
 autoconf.h*
@@ -76,6 +80,7 @@ btfixupprep
 build
 bvmlinux
 bzImage*
+capflags.c
 classlist.h*
 comp*.log
 compile.h*
@@ -94,6 +99,7 @@ devlist.h*
 docproc
 elf2ecoff
 elfconfig.h*
+evergreen_reg_safe.h
 fixdep
 flask.h
 fore200e_mkfirm
@@ -108,9 +114,16 @@ genksyms
 *_gray256.c
 ihex2fw
 ikconfig.h*
+inat-tables.c
 initramfs_data.cpio
 initramfs_data.cpio.gz
 initramfs_list
+int16.c
+int1.c
+int2.c
+int32.c
+int4.c
+int8.c
 kallsyms
 kconfig
 keywords.c
@@ -140,6 +153,7 @@ mkprep
 mktables
 mktree
 modpost
+modules.builtin
 modules.order
 modversions.h*
 ncscope.*
@@ -153,14 +167,23 @@ pca200e.bin
 pca200e_ecd.bin2
 piggy.gz
 piggyback
+piggy.S
 pnmtologo
 ppc_defs.h*
 pss_boot.h
 qconf
+r100_reg_safe.h
+r200_reg_safe.h
+r300_reg_safe.h
+r420_reg_safe.h
+r600_reg_safe.h
 raid6altivec*.c
 raid6int*.c
 raid6tables.c
 relocs
+rn50_reg_safe.h
+rs600_reg_safe.h
+rv515_reg_safe.h
 series
 setup
 setup.bin
@@ -169,6 +192,7 @@ sImage
 sm_tbl*
 split-include
 syscalltab.h
+tables.c
 tags
 tftpboot.img
 timeconst.h
@@ -190,6 +214,7 @@ vmlinux
 vmlinux-*
 vmlinux.aout
 vmlinux.lds
+voffset.h
 vsyscall.lds
 vsyscall_32.lds
 wanxlfw.inc
@@ -200,3 +225,4 @@ wakeup.elf
 wakeup.lds
 zImage*
 zconf.hash.c
+zoffset.h
diff --git a/Documentation/driver-model/interface.txt b/Documentation/driver-model/interface.txt
deleted file mode 100644
index c66912bfe86..00000000000
--- a/Documentation/driver-model/interface.txt
+++ /dev/null
@@ -1,129 +0,0 @@
-
-Device Interfaces
-
-Introduction
-~~~~~~~~~~~~
-
-Device interfaces are the logical interfaces of device classes that correlate
-directly to userspace interfaces, like device nodes. 
-   
-Each device class may have multiple interfaces through which you can 
-access the same device. An input device may support the mouse interface, 
-the 'evdev' interface, and the touchscreen interface. A SCSI disk would 
-support the disk interface, the SCSI generic interface, and possibly a raw 
-device interface. 
-
-Device interfaces are registered with the class they belong to. As devices
-are added to the class, they are added to each interface registered with
-the class. The interface is responsible for determining whether the device
-supports the interface or not. 
-
-
-Programming Interface
-~~~~~~~~~~~~~~~~~~~~~
-
-struct device_interface {
-	char			* name;
-	rwlock_t		lock;
-	u32			devnum;
-	struct device_class	* devclass;
-
-	struct list_head	node;
-	struct driver_dir_entry	dir;
-
-	int (*add_device)(struct device *);
-	int (*add_device)(struct intf_data *);
-};
-
-int interface_register(struct device_interface *);
-void interface_unregister(struct device_interface *);
-
-
-An interface must specify the device class it belongs to. It is added
-to that class's list of interfaces on registration.
-
-
-Interfaces can be added to a device class at any time. Whenever it is
-added, each device in the class is passed to the interface's
-add_device callback. When an interface is removed, each device is
-removed from the interface.
-
-
-Devices
-~~~~~~~
-Once a device is added to a device class, it is added to each
-interface that is registered with the device class. The class
-is expected to place a class-specific data structure in 
-struct device::class_data. The interface can use that (along with
-other fields of struct device) to determine whether or not the driver
-and/or device support that particular interface.
-
-
-Data
-~~~~
-
-struct intf_data {
-	struct list_head	node;
-	struct device_interface	* intf;
-	struct device 		* dev;
-	u32			intf_num;
-};
-
-int interface_add_data(struct interface_data *);
-
-The interface is responsible for allocating and initializing a struct 
-intf_data and calling interface_add_data() to add it to the device's list
-of interfaces it belongs to. This list will be iterated over when the device
-is removed from the class (instead of all possible interfaces for a class).
-This structure should probably be embedded in whatever per-device data 
-structure the interface is allocating anyway.
-   
-Devices are enumerated within the interface. This happens in interface_add_data()
-and the enumerated value is stored in the struct intf_data for that device. 
-
-sysfs
-~~~~~
-Each interface is given a directory in the directory of the device
-class it belongs to:
-
-Interfaces get a directory in the class's directory as well:
-
-   class/
-   `-- input
-       |-- devices
-       |-- drivers
-       |-- mouse
-       `-- evdev
-
-When a device is added to the interface, a symlink is created that points 
-to the device's directory in the physical hierarchy:
-
-   class/
-   `-- input
-       |-- devices
-       |   `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
-       |-- drivers
-       |   `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
-       |-- mouse
-       |   `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
-       `-- evdev
-           `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
-
-
-Future Plans
-~~~~~~~~~~~~
-A device interface is correlated directly with a userspace interface
-for a device, specifically a device node. For instance, a SCSI disk
-exposes at least two interfaces to userspace: the standard SCSI disk
-interface and the SCSI generic interface. It might also export a raw
-device interface. 
-
-Many interfaces have a major number associated with them and each
-device gets a minor number. Or, multiple interfaces might share one
-major number, and each will receive a range of minor numbers (like in
-the case of input devices).
-
-These major and minor numbers could be stored in the interface
-structure. Major and minor allocations could happen when the interface
-is registered with the class, or via a helper function. 
-
diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt
index e175784b89b..64188650420 100644
--- a/Documentation/dvb/lmedm04.txt
+++ b/Documentation/dvb/lmedm04.txt
@@ -46,7 +46,7 @@ and run
 Other LG firmware can be extracted manually from US280D.sys
 only found in windows/system32/driver.
 
-dd if=US280D.sys ibs=1 skip=42616 count=3668 of=dvb-usb-lme2510-lg.fw
+dd if=US280D.sys ibs=1 skip=42360 count=3924 of=dvb-usb-lme2510-lg.fw
 
 for DM04 LME2510C (LG Tuner)
 ---------------------------
diff --git a/Documentation/edac.txt b/Documentation/edac.txt
index 0b875e8da96..9ee774de57c 100644
--- a/Documentation/edac.txt
+++ b/Documentation/edac.txt
@@ -196,7 +196,7 @@ csrow3.
 The representation of the above is reflected in the directory tree
 in EDAC's sysfs interface. Starting in directory
 /sys/devices/system/edac/mc each memory controller will be represented
-by its own 'mcX' directory, where 'X" is the index of the MC.
+by its own 'mcX' directory, where 'X' is the index of the MC.
 
 
 	..../edac/mc/
@@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC.
 		   ....
 
 Under each 'mcX' directory each 'csrowX' is again represented by a
-'csrowX', where 'X" is the csrow index:
+'csrowX', where 'X' is the csrow index:
 
 
 	.../mc/mc0/
@@ -232,7 +232,7 @@ EDAC control and attribute files.
 
 
 In 'mcX' directories are EDAC control and attribute files for
-this 'X" instance of the memory controllers:
+this 'X' instance of the memory controllers:
 
 
 Counter reset control file:
@@ -343,7 +343,7 @@ Sdram memory scrubbing rate:
 'csrowX' DIRECTORIES
 
 In the 'csrowX' directories are EDAC control and attribute files for
-this 'X" instance of csrow:
+this 'X' instance of csrow:
 
 
 Total Uncorrectable Errors count attribute file:
diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX
index a618fd99c9f..30a70542e82 100644
--- a/Documentation/fb/00-INDEX
+++ b/Documentation/fb/00-INDEX
@@ -4,33 +4,41 @@ please mail me.
 				    Geert Uytterhoeven <geert@linux-m68k.org>
 
 00-INDEX
-	- this file
+	- this file.
 arkfb.txt
 	- info on the fbdev driver for ARK Logic chips.
 aty128fb.txt
 	- info on the ATI Rage128 frame buffer driver.
 cirrusfb.txt
 	- info on the driver for Cirrus Logic chipsets.
+cmap_xfbdev.txt
+	- an introduction to fbdev's cmap structures.
 deferred_io.txt
 	- an introduction to deferred IO.
+efifb.txt
+	- info on the EFI platform driver for Intel based Apple computers.
+ep93xx-fb.txt
+	- info on the driver for EP93xx LCD controller.
 fbcon.txt
 	- intro to and usage guide for the framebuffer console (fbcon).
 framebuffer.txt
 	- introduction to frame buffer devices.
-imacfb.txt
-	- info on the generic EFI platform driver for Intel based Macs.
+gxfb.txt
+	- info on the framebuffer driver for AMD Geode GX2 based processors.
 intel810.txt
 	- documentation for the Intel 810/815 framebuffer driver.
 intelfb.txt
 	- docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver.
 internals.txt
 	- quick overview of frame buffer device internals.
+lxfb.txt
+	- info on the framebuffer driver for AMD Geode LX based processors.
 matroxfb.txt
 	- info on the Matrox framebuffer driver for Alpha, Intel and PPC.
+metronomefb.txt
+	- info on the driver for the Metronome display controller.
 modedb.txt
 	- info on the video mode database.
-matroxfb.txt
-	- info on the Matrox frame buffer driver.
 pvr2fb.txt
 	- info on the PowerVR 2 frame buffer driver.
 pxafb.txt
@@ -39,13 +47,23 @@ s3fb.txt
 	- info on the fbdev driver for S3 Trio/Virge chips.
 sa1100fb.txt
 	- information about the driver for the SA-1100 LCD controller.
+sh7760fb.txt
+	- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
 sisfb.txt
 	- info on the framebuffer device driver for various SiS chips.
 sstfb.txt
 	- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
 tgafb.txt
-	- info on the TGA (DECChip 21030) frame buffer driver
+	- info on the TGA (DECChip 21030) frame buffer driver.
+tridentfb.txt
+	info on the framebuffer driver for some Trident chip based cards.
+uvesafb.txt
+	- info on the userspace VESA (VBE2+ compliant) frame buffer device.
 vesafb.txt
-	- info on the VESA frame buffer device
+	- info on the VESA frame buffer device.
+viafb.modes
+	- list of modes for VIA Integration Graphic Chip.
+viafb.txt
+	- info on the VIA Integration Graphic Chip console framebuffer driver.
 vt8623fb.txt
 	- info on the fb driver for the graphics core in VIA VT8623 chipsets.
diff --git a/drivers/staging/udlfb/udlfb.txt b/Documentation/fb/udlfb.txt
index 7fdde2a02a2..7fdde2a02a2 100644
--- a/drivers/staging/udlfb/udlfb.txt
+++ b/Documentation/fb/udlfb.txt
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index d8f36f984fa..22f10818c2b 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -97,36 +97,38 @@ Who:	Pavel Machek <pavel@ucw.cz>
 
 ---------------------------
 
-What:	Video4Linux API 1 ioctls and from Video devices.
-When:	kernel 2.6.38
-Files:	include/linux/videodev.h
-Check:	include/linux/videodev.h
-Why:	V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6
-	series. The old API have lots of drawbacks and don't provide enough
-	means to work with all video and audio standards. The newer API is
-	already available on the main drivers and should be used instead.
-	Newer drivers should use v4l_compat_translate_ioctl function to handle
-	old calls, replacing to newer ones.
-	Decoder iocts are using internally to allow video drivers to
-	communicate with video decoders. This should also be improved to allow
-	V4L2 calls being translated into compatible internal ioctls.
-	Compatibility ioctls will be provided, for a while, via 
-	v4l1-compat module. 
-Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
-
----------------------------
-
 What:	Video4Linux obsolete drivers using V4L1 API
-When:	kernel 2.6.38
-Files:	drivers/staging/cpia/* drivers/staging/stradis/*
-Check:	drivers/staging/cpia/cpia.c drivers/staging/stradis/stradis.c
+When:	kernel 2.6.39
+Files:	drivers/staging/se401/* drivers/staging/usbvideo/*
+Check:	drivers/staging/se401/se401.c drivers/staging/usbvideo/usbvideo.c
 Why:	There are some drivers still using V4L1 API, despite all efforts we've done
 	to migrate. Those drivers are for obsolete hardware that the old maintainer
 	didn't care (or not have the hardware anymore), and that no other developer
 	could find any hardware to buy. They probably have no practical usage today,
 	and people with such old hardware could probably keep using an older version
-	of the kernel. Those drivers will be moved to staging on 2.6.37 and, if nobody
-	care enough to port and test them with V4L2 API, they'll be removed on 2.6.38.
+	of the kernel. Those drivers will be moved to staging on 2.6.38 and, if nobody
+	cares enough to port and test them with V4L2 API, they'll be removed on 2.6.39.
+Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
+
+---------------------------
+
+What:	Video4Linux: Remove obsolete ioctl's
+When:	kernel 2.6.39
+Files:	include/media/videodev2.h
+Why:	Some ioctl's were defined wrong on 2.6.2 and 2.6.6, using the wrong
+	type of R/W arguments. They were fixed, but the old ioctl names are
+	still there, maintained to avoid breaking binary compatibility:
+	  #define VIDIOC_OVERLAY_OLD   	_IOWR('V', 14, int)
+	  #define VIDIOC_S_PARM_OLD	_IOW('V', 22, struct v4l2_streamparm)
+	  #define VIDIOC_S_CTRL_OLD	_IOW('V', 28, struct v4l2_control)
+	  #define VIDIOC_G_AUDIO_OLD	_IOWR('V', 33, struct v4l2_audio)
+	  #define VIDIOC_G_AUDOUT_OLD	_IOWR('V', 49, struct v4l2_audioout)
+	  #define VIDIOC_CROPCAP_OLD	_IOR('V', 58, struct v4l2_cropcap)
+	There's no sense on preserving those forever, as it is very doubtful
+	that someone would try to use a such old binary with a modern kernel.
+	Removing them will allow us to remove some magic done at the V4L ioctl
+	handler.
+
 Who:	Mauro Carvalho Chehab <mchehab@infradead.org>
 
 ---------------------------
@@ -554,3 +556,23 @@ Why:    This is a legacy interface which have been replaced by a more
 Who:    NeilBrown <neilb@suse.de>
 
 ----------------------------
+
+What:	i2c_adapter.id
+When:	June 2011
+Why:	This field is deprecated. I2C device drivers shouldn't change their
+	behavior based on the underlying I2C adapter. Instead, the I2C
+	adapter driver should instantiate the I2C devices and provide the
+	needed platform-specific information.
+Who:	Jean Delvare <khali@linux-fr.org>
+
+----------------------------
+
+What:	cancel_rearming_delayed_work[queue]()
+When:	2.6.39
+
+Why:	The functions have been superceded by cancel_delayed_work_sync()
+	quite some time ago.  The conversion is trivial and there is no
+	in-kernel user left.
+Who:	Tejun Heo <tj@kernel.org>
+
+----------------------------
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index a91f3089001..977d8919cc6 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -9,23 +9,25 @@ be able to use diff(1).
 
 --------------------------- dentry_operations --------------------------
 prototypes:
-	int (*d_revalidate)(struct dentry *, int);
-	int (*d_hash) (struct dentry *, struct qstr *);
-	int (*d_compare) (struct dentry *, struct qstr *, struct qstr *);
+	int (*d_revalidate)(struct dentry *, struct nameidata *);
+	int (*d_hash)(const struct dentry *, const struct inode *,
+			struct qstr *);
+	int (*d_compare)(const struct dentry *, const struct inode *,
+			const struct dentry *, const struct inode *,
+			unsigned int, const char *, const struct qstr *);
 	int (*d_delete)(struct dentry *);
 	void (*d_release)(struct dentry *);
 	void (*d_iput)(struct dentry *, struct inode *);
 	char *(*d_dname)((struct dentry *dentry, char *buffer, int buflen);
 
 locking rules:
-	none have BKL
-		dcache_lock	rename_lock	->d_lock	may block
-d_revalidate:	no		no		no		yes
-d_hash		no		no		no		yes
-d_compare:	no		yes		no		no 
-d_delete:	yes		no		yes		no
-d_release:	no		no		no		yes
-d_iput:		no		no		no		yes
+		rename_lock	->d_lock	may block	rcu-walk
+d_revalidate:	no		no		yes (ref-walk)	maybe
+d_hash		no		no		no		maybe
+d_compare:	yes		no		no		maybe
+d_delete:	no		yes		no		no
+d_release:	no		no		yes		no
+d_iput:		no		no		yes		no
 d_dname:	no		no		no		no
 
 --------------------------- inode_operations --------------------------- 
@@ -42,18 +44,23 @@ ata *);
 	int (*rename) (struct inode *, struct dentry *,
 			struct inode *, struct dentry *);
 	int (*readlink) (struct dentry *, char __user *,int);
-	int (*follow_link) (struct dentry *, struct nameidata *);
+	void * (*follow_link) (struct dentry *, struct nameidata *);
+	void (*put_link) (struct dentry *, struct nameidata *, void *);
 	void (*truncate) (struct inode *);
-	int (*permission) (struct inode *, int, struct nameidata *);
+	int (*permission) (struct inode *, int, unsigned int);
+	int (*check_acl)(struct inode *, int, unsigned int);
 	int (*setattr) (struct dentry *, struct iattr *);
 	int (*getattr) (struct vfsmount *, struct dentry *, struct kstat *);
 	int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
 	ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t);
 	ssize_t (*listxattr) (struct dentry *, char *, size_t);
 	int (*removexattr) (struct dentry *, const char *);
+	void (*truncate_range)(struct inode *, loff_t, loff_t);
+	long (*fallocate)(struct inode *inode, int mode, loff_t offset, loff_t len);
+	int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len);
 
 locking rules:
-	all may block, none have BKL
+	all may block
 		i_mutex(inode)
 lookup:		yes
 create:		yes
@@ -66,19 +73,24 @@ rmdir:		yes (both)	(see below)
 rename:		yes (all)	(see below)
 readlink:	no
 follow_link:	no
+put_link:	no
 truncate:	yes		(see below)
 setattr:	yes
-permission:	no
+permission:	no (may not block if called in rcu-walk mode)
+check_acl:	no
 getattr:	no
 setxattr:	yes
 getxattr:	no
 listxattr:	no
 removexattr:	yes
+truncate_range:	yes
+fallocate:	no
+fiemap:		no
 	Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on
 victim.
 	cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem.
 	->truncate() is never called directly - it's a callback, not a
-method. It's called by vmtruncate() - library function normally used by
+method. It's called by vmtruncate() - deprecated library function used by
 ->setattr(). Locking information above applies to that call (i.e. is
 inherited from ->setattr() - vmtruncate() is used when ATTR_SIZE had been
 passed).
@@ -91,7 +103,7 @@ prototypes:
 	struct inode *(*alloc_inode)(struct super_block *sb);
 	void (*destroy_inode)(struct inode *);
 	void (*dirty_inode) (struct inode *);
-	int (*write_inode) (struct inode *, int);
+	int (*write_inode) (struct inode *, struct writeback_control *wbc);
 	int (*drop_inode) (struct inode *);
 	void (*evict_inode) (struct inode *);
 	void (*put_super) (struct super_block *);
@@ -105,10 +117,10 @@ prototypes:
 	int (*show_options)(struct seq_file *, struct vfsmount *);
 	ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
 	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
+	int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
 
 locking rules:
 	All may block [not true, see below]
-	None have BKL
 			s_umount
 alloc_inode:
 destroy_inode:
@@ -127,6 +139,7 @@ umount_begin:		no
 show_options:		no		(namespace_sem)
 quota_read:		no		(see below)
 quota_write:		no		(see below)
+bdev_try_to_free_page:	no		(see below)
 
 ->statfs() has s_umount (shared) when called by ustat(2) (native or
 compat), but that's an accident of bad API; s_umount is used to pin
@@ -139,19 +152,25 @@ be the only ones operating on the quota file by the quota code (via
 dqio_sem) (unless an admin really wants to screw up something and
 writes to quota files with quotas on). For other details about locking
 see also dquot_operations section.
+->bdev_try_to_free_page is called from the ->releasepage handler of
+the block device inode.  See there for more details.
 
 --------------------------- file_system_type ---------------------------
 prototypes:
 	int (*get_sb) (struct file_system_type *, int,
 		       const char *, void *, struct vfsmount *);
+	struct dentry *(*mount) (struct file_system_type *, int,
+		       const char *, void *);
 	void (*kill_sb) (struct super_block *);
 locking rules:
-		may block	BKL
-get_sb		yes		no
-kill_sb		yes		no
+		may block
+get_sb		yes
+mount		yes
+kill_sb		yes
 
 ->get_sb() returns error or 0 with locked superblock attached to the vfsmount
 (exclusive on ->s_umount).
+->mount() returns ERR_PTR or the root dentry.
 ->kill_sb() takes a write-locked superblock, does all shutdown work on it,
 unlocks and drops the reference.
 
@@ -173,28 +192,38 @@ prototypes:
 	sector_t (*bmap)(struct address_space *, sector_t);
 	int (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, int);
+	void (*freepage)(struct page *);
 	int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
 			loff_t offset, unsigned long nr_segs);
-	int (*launder_page) (struct page *);
+	int (*get_xip_mem)(struct address_space *, pgoff_t, int, void **,
+				unsigned long *);
+	int (*migratepage)(struct address_space *, struct page *, struct page *);
+	int (*launder_page)(struct page *);
+	int (*is_partially_uptodate)(struct page *, read_descriptor_t *, unsigned long);
+	int (*error_remove_page)(struct address_space *, struct page *);
 
 locking rules:
-	All except set_page_dirty may block
-
-			BKL	PageLocked(page)	i_mutex
-writepage:		no	yes, unlocks (see below)
-readpage:		no	yes, unlocks
-sync_page:		no	maybe
-writepages:		no
-set_page_dirty		no	no
-readpages:		no
-write_begin:		no	locks the page		yes
-write_end:		no	yes, unlocks		yes
-perform_write:		no	n/a			yes
-bmap:			no
-invalidatepage:		no	yes
-releasepage:		no	yes
-direct_IO:		no
-launder_page:		no	yes
+	All except set_page_dirty and freepage may block
+
+			PageLocked(page)	i_mutex
+writepage:		yes, unlocks (see below)
+readpage:		yes, unlocks
+sync_page:		maybe
+writepages:
+set_page_dirty		no
+readpages:
+write_begin:		locks the page		yes
+write_end:		yes, unlocks		yes
+bmap:
+invalidatepage:		yes
+releasepage:		yes
+freepage:		yes
+direct_IO:
+get_xip_mem:					maybe
+migratepage:		yes (both)
+launder_page:		yes
+is_partially_uptodate:	yes
+error_remove_page:	yes
 
 	->write_begin(), ->write_end(), ->sync_page() and ->readpage()
 may be called from the request handler (/dev/loop).
@@ -274,9 +303,8 @@ under spinlock (it cannot block) and is sometimes called with the page
 not locked.
 
 	->bmap() is currently used by legacy ioctl() (FIBMAP) provided by some
-filesystems and by the swapper. The latter will eventually go away. All
-instances do not actually need the BKL. Please, keep it that way and don't
-breed new callers.
+filesystems and by the swapper. The latter will eventually go away.  Please,
+keep it that way and don't breed new callers.
 
 	->invalidatepage() is called when the filesystem must attempt to drop
 some or all of the buffers from the page when it is being truncated.  It
@@ -288,53 +316,46 @@ buffers from the page in preparation for freeing it.  It returns zero to
 indicate that the buffers are (or may be) freeable.  If ->releasepage is zero,
 the kernel assumes that the fs has no private interest in the buffers.
 
+	->freepage() is called when the kernel is done dropping the page
+from the page cache.
+
 	->launder_page() may be called prior to releasing a page if
 it is still found to be dirty. It returns zero if the page was successfully
 cleaned, or an error value if not. Note that in order to prevent the page
 getting mapped back in and redirtied, it needs to be kept locked
 across the entire operation.
 
-	Note: currently almost all instances of address_space methods are
-using BKL for internal serialization and that's one of the worst sources
-of contention. Normally they are calling library functions (in fs/buffer.c)
-and pass foo_get_block() as a callback (on local block-based filesystems,
-indeed). BKL is not needed for library stuff and is usually taken by
-foo_get_block(). It's an overkill, since block bitmaps can be protected by
-internal fs locking and real critical areas are much smaller than the areas
-filesystems protect now.
-
 ----------------------- file_lock_operations ------------------------------
 prototypes:
-	void (*fl_insert)(struct file_lock *);	/* lock insertion callback */
-	void (*fl_remove)(struct file_lock *);	/* lock removal callback */
 	void (*fl_copy_lock)(struct file_lock *, struct file_lock *);
 	void (*fl_release_private)(struct file_lock *);
 
 
 locking rules:
-			BKL	may block
-fl_insert:		yes	no
-fl_remove:		yes	no
-fl_copy_lock:		yes	no
-fl_release_private:	yes	yes
+			file_lock_lock	may block
+fl_copy_lock:		yes		no
+fl_release_private:	maybe		no
 
 ----------------------- lock_manager_operations ---------------------------
 prototypes:
 	int (*fl_compare_owner)(struct file_lock *, struct file_lock *);
 	void (*fl_notify)(struct file_lock *);  /* unblock callback */
+	int (*fl_grant)(struct file_lock *, struct file_lock *, int);
 	void (*fl_release_private)(struct file_lock *);
 	void (*fl_break)(struct file_lock *); /* break_lease callback */
+	int (*fl_mylease)(struct file_lock *, struct file_lock *);
+	int (*fl_change)(struct file_lock **, int);
 
 locking rules:
-			BKL	may block
-fl_compare_owner:	yes	no
-fl_notify:		yes	no
-fl_release_private:	yes	yes
-fl_break:		yes	no
-
-	Currently only NFSD and NLM provide instances of this class. None of the
-them block. If you have out-of-tree instances - please, show up. Locking
-in that area will change.
+			file_lock_lock	may block
+fl_compare_owner:	yes		no
+fl_notify:		yes		no
+fl_grant:		no		no
+fl_release_private:	maybe		no
+fl_break:		yes		no
+fl_mylease:		yes		no
+fl_change		yes		no
+
 --------------------------- buffer_head -----------------------------------
 prototypes:
 	void (*b_end_io)(struct buffer_head *bh, int uptodate);
@@ -359,17 +380,17 @@ prototypes:
 	void (*swap_slot_free_notify) (struct block_device *, unsigned long);
 
 locking rules:
-			BKL	bd_mutex
-open:			no	yes
-release:		no	yes
-ioctl:			no	no
-compat_ioctl:		no	no
-direct_access:		no	no
-media_changed:		no	no
-unlock_native_capacity:	no	no
-revalidate_disk:	no	no
-getgeo:			no	no
-swap_slot_free_notify:	no	no	(see below)
+			bd_mutex
+open:			yes
+release:		yes
+ioctl:			no
+compat_ioctl:		no
+direct_access:		no
+media_changed:		no
+unlock_native_capacity:	no
+revalidate_disk:	no
+getgeo:			no
+swap_slot_free_notify:	no	(see below)
 
 media_changed, unlock_native_capacity and revalidate_disk are called only from
 check_disk_change().
@@ -408,34 +429,21 @@ prototypes:
 	unsigned long (*get_unmapped_area)(struct file *, unsigned long,
 			unsigned long, unsigned long, unsigned long);
 	int (*check_flags)(int);
+	int (*flock) (struct file *, int, struct file_lock *);
+	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *,
+			size_t, unsigned int);
+	ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *,
+			size_t, unsigned int);
+	int (*setlease)(struct file *, long, struct file_lock **);
 };
 
 locking rules:
-	All may block.
-			BKL
-llseek:			no	(see below)
-read:			no
-aio_read:		no
-write:			no
-aio_write:		no
-readdir: 		no
-poll:			no
-unlocked_ioctl:		no
-compat_ioctl:		no
-mmap:			no
-open:			no
-flush:			no
-release:		no
-fsync:			no	(see below)
-aio_fsync:		no
-fasync:			no
-lock:			yes
-readv:			no
-writev:			no
-sendfile:		no
-sendpage:		no
-get_unmapped_area:	no
-check_flags:		no
+	All may block except for ->setlease.
+	No VFS locks held on entry except for ->fsync and ->setlease.
+
+->fsync() has i_mutex on inode.
+
+->setlease has the file_list_lock held and must not sleep.
 
 ->llseek() locking has moved from llseek to the individual llseek
 implementations.  If your fs is not using generic_file_llseek, you
@@ -445,17 +453,10 @@ mutex or just to use i_size_read() instead.
 Note: this does not protect the file->f_pos against concurrent modifications
 since this is something the userspace has to take care about.
 
-Note: ext2_release() was *the* source of contention on fs-intensive
-loads and dropping BKL on ->release() helps to get rid of that (we still
-grab BKL for cases when we close a file that had been opened r/w, but that
-can and should be done using the internal locking with smaller critical areas).
-Current worst offender is ext2_get_block()...
-
-->fasync() is called without BKL protection, and is responsible for
-maintaining the FASYNC bit in filp->f_flags.  Most instances call
-fasync_helper(), which does that maintenance, so it's not normally
-something one needs to worry about.  Return values > 0 will be mapped to
-zero in the VFS layer.
+->fasync() is responsible for maintaining the FASYNC bit in filp->f_flags.
+Most instances call fasync_helper(), which does that maintenance, so it's
+not normally something one needs to worry about.  Return values > 0 will be
+mapped to zero in the VFS layer.
 
 ->readdir() and ->ioctl() on directories must be changed. Ideally we would
 move ->readdir() to inode_operations and use a separate method for directory
@@ -466,8 +467,6 @@ components. And there are other reasons why the current interface is a mess...
 ->read on directories probably must go away - we should just enforce -EISDIR
 in sys_read() and friends.
 
-->fsync() has i_mutex on inode.
-
 --------------------------- dquot_operations -------------------------------
 prototypes:
 	int (*write_dquot) (struct dquot *);
@@ -502,12 +501,12 @@ prototypes:
 	int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);
 
 locking rules:
-		BKL	mmap_sem	PageLocked(page)
-open:		no	yes
-close:		no	yes
-fault:		no	yes		can return with page locked
-page_mkwrite:	no	yes		can return with page locked
-access:		no	yes
+		mmap_sem	PageLocked(page)
+open:		yes
+close:		yes
+fault:		yes		can return with page locked
+page_mkwrite:	yes		can return with page locked
+access:		yes
 
 	->fault() is called when a previously not present pte is about
 to be faulted in. The filesystem must find and return the page associated
@@ -534,6 +533,3 @@ VM_IO | VM_PFNMAP VMAs.
 
 (if you break something or notice that it is broken and do not fix it yourself
 - at least put it here)
-
-ipc/shm.c::shm_delete() - may need BKL.
-->read() and ->write() in many drivers are (probably) missing BKL.
diff --git a/Documentation/filesystems/configfs/configfs_example_explicit.c b/Documentation/filesystems/configfs/configfs_example_explicit.c
index d428cc9f07f..fd53869f563 100644
--- a/Documentation/filesystems/configfs/configfs_example_explicit.c
+++ b/Documentation/filesystems/configfs/configfs_example_explicit.c
@@ -89,7 +89,7 @@ static ssize_t childless_storeme_write(struct childless *childless,
 	char *p = (char *) page;
 
 	tmp = simple_strtoul(p, &p, 10);
-	if (!p || (*p && (*p != '\n')))
+	if ((*p != '\0') && (*p != '\n'))
 		return -EINVAL;
 
 	if (tmp > INT_MAX)
diff --git a/Documentation/filesystems/dentry-locking.txt b/Documentation/filesystems/dentry-locking.txt
deleted file mode 100644
index 79334ed5daa..00000000000
--- a/Documentation/filesystems/dentry-locking.txt
+++ /dev/null
@@ -1,174 +0,0 @@
-RCU-based dcache locking model
-==============================
-
-On many workloads, the most common operation on dcache is to look up a
-dentry, given a parent dentry and the name of the child. Typically,
-for every open(), stat() etc., the dentry corresponding to the
-pathname will be looked up by walking the tree starting with the first
-component of the pathname and using that dentry along with the next
-component to look up the next level and so on. Since it is a frequent
-operation for workloads like multiuser environments and web servers,
-it is important to optimize this path.
-
-Prior to 2.5.10, dcache_lock was acquired in d_lookup and thus in
-every component during path look-up. Since 2.5.10 onwards, fast-walk
-algorithm changed this by holding the dcache_lock at the beginning and
-walking as many cached path component dentries as possible. This
-significantly decreases the number of acquisition of
-dcache_lock. However it also increases the lock hold time
-significantly and affects performance in large SMP machines. Since
-2.5.62 kernel, dcache has been using a new locking model that uses RCU
-to make dcache look-up lock-free.
-
-The current dcache locking model is not very different from the
-existing dcache locking model. Prior to 2.5.62 kernel, dcache_lock
-protected the hash chain, d_child, d_alias, d_lru lists as well as
-d_inode and several other things like mount look-up. RCU-based changes
-affect only the way the hash chain is protected. For everything else
-the dcache_lock must be taken for both traversing as well as
-updating. The hash chain updates too take the dcache_lock.  The
-significant change is the way d_lookup traverses the hash chain, it
-doesn't acquire the dcache_lock for this and rely on RCU to ensure
-that the dentry has not been *freed*.
-
-
-Dcache locking details
-======================
-
-For many multi-user workloads, open() and stat() on files are very
-frequently occurring operations. Both involve walking of path names to
-find the dentry corresponding to the concerned file. In 2.4 kernel,
-dcache_lock was held during look-up of each path component. Contention
-and cache-line bouncing of this global lock caused significant
-scalability problems. With the introduction of RCU in Linux kernel,
-this was worked around by making the look-up of path components during
-path walking lock-free.
-
-
-Safe lock-free look-up of dcache hash table
-===========================================
-
-Dcache is a complex data structure with the hash table entries also
-linked together in other lists. In 2.4 kernel, dcache_lock protected
-all the lists. We applied RCU only on hash chain walking. The rest of
-the lists are still protected by dcache_lock.  Some of the important
-changes are :
-
-1. The deletion from hash chain is done using hlist_del_rcu() macro
-   which doesn't initialize next pointer of the deleted dentry and
-   this allows us to walk safely lock-free while a deletion is
-   happening.
-
-2. Insertion of a dentry into the hash table is done using
-   hlist_add_head_rcu() which take care of ordering the writes - the
-   writes to the dentry must be visible before the dentry is
-   inserted. This works in conjunction with hlist_for_each_rcu(),
-   which has since been replaced by hlist_for_each_entry_rcu(), while
-   walking the hash chain. The only requirement is that all
-   initialization to the dentry must be done before
-   hlist_add_head_rcu() since we don't have dcache_lock protection
-   while traversing the hash chain. This isn't different from the
-   existing code.
-
-3. The dentry looked up without holding dcache_lock by cannot be
-   returned for walking if it is unhashed. It then may have a NULL
-   d_inode or other bogosity since RCU doesn't protect the other
-   fields in the dentry. We therefore use a flag DCACHE_UNHASHED to
-   indicate unhashed dentries and use this in conjunction with a
-   per-dentry lock (d_lock). Once looked up without the dcache_lock,
-   we acquire the per-dentry lock (d_lock) and check if the dentry is
-   unhashed. If so, the look-up is failed. If not, the reference count
-   of the dentry is increased and the dentry is returned.
-
-4. Once a dentry is looked up, it must be ensured during the path walk
-   for that component it doesn't go away. In pre-2.5.10 code, this was
-   done holding a reference to the dentry. dcache_rcu does the same.
-   In some sense, dcache_rcu path walking looks like the pre-2.5.10
-   version.
-
-5. All dentry hash chain updates must take the dcache_lock as well as
-   the per-dentry lock in that order. dput() does this to ensure that
-   a dentry that has just been looked up in another CPU doesn't get
-   deleted before dget() can be done on it.
-
-6. There are several ways to do reference counting of RCU protected
-   objects. One such example is in ipv4 route cache where deferred
-   freeing (using call_rcu()) is done as soon as the reference count
-   goes to zero. This cannot be done in the case of dentries because
-   tearing down of dentries require blocking (dentry_iput()) which
-   isn't supported from RCU callbacks. Instead, tearing down of
-   dentries happen synchronously in dput(), but actual freeing happens
-   later when RCU grace period is over. This allows safe lock-free
-   walking of the hash chains, but a matched dentry may have been
-   partially torn down. The checking of DCACHE_UNHASHED flag with
-   d_lock held detects such dentries and prevents them from being
-   returned from look-up.
-
-
-Maintaining POSIX rename semantics
-==================================
-
-Since look-up of dentries is lock-free, it can race against a
-concurrent rename operation. For example, during rename of file A to
-B, look-up of either A or B must succeed.  So, if look-up of B happens
-after A has been removed from the hash chain but not added to the new
-hash chain, it may fail.  Also, a comparison while the name is being
-written concurrently by a rename may result in false positive matches
-violating rename semantics.  Issues related to race with rename are
-handled as described below :
-
-1. Look-up can be done in two ways - d_lookup() which is safe from
-   simultaneous renames and __d_lookup() which is not.  If
-   __d_lookup() fails, it must be followed up by a d_lookup() to
-   correctly determine whether a dentry is in the hash table or
-   not. d_lookup() protects look-ups using a sequence lock
-   (rename_lock).
-
-2. The name associated with a dentry (d_name) may be changed if a
-   rename is allowed to happen simultaneously. To avoid memcmp() in
-   __d_lookup() go out of bounds due to a rename and false positive
-   comparison, the name comparison is done while holding the
-   per-dentry lock. This prevents concurrent renames during this
-   operation.
-
-3. Hash table walking during look-up may move to a different bucket as
-   the current dentry is moved to a different bucket due to rename.
-   But we use hlists in dcache hash table and they are
-   null-terminated.  So, even if a dentry moves to a different bucket,
-   hash chain walk will terminate. [with a list_head list, it may not
-   since termination is when the list_head in the original bucket is
-   reached].  Since we redo the d_parent check and compare name while
-   holding d_lock, lock-free look-up will not race against d_move().
-
-4. There can be a theoretical race when a dentry keeps coming back to
-   original bucket due to double moves. Due to this look-up may
-   consider that it has never moved and can end up in a infinite loop.
-   But this is not any worse that theoretical livelocks we already
-   have in the kernel.
-
-
-Important guidelines for filesystem developers related to dcache_rcu
-====================================================================
-
-1. Existing dcache interfaces (pre-2.5.62) exported to filesystem
-   don't change. Only dcache internal implementation changes. However
-   filesystems *must not* delete from the dentry hash chains directly
-   using the list macros like allowed earlier. They must use dcache
-   APIs like d_drop() or __d_drop() depending on the situation.
-
-2. d_flags is now protected by a per-dentry lock (d_lock). All access
-   to d_flags must be protected by it.
-
-3. For a hashed dentry, checking of d_count needs to be protected by
-   d_lock.
-
-
-Papers and other documentation on dcache locking
-================================================
-
-1. Scaling dcache with RCU (http://linuxjournal.com/article.php?sid=7124).
-
-2. http://lse.sourceforge.net/locking/dcache/dcache.html
-
-
-
diff --git a/Documentation/filesystems/path-lookup.txt b/Documentation/filesystems/path-lookup.txt
new file mode 100644
index 00000000000..eb59c8b44be
--- /dev/null
+++ b/Documentation/filesystems/path-lookup.txt
@@ -0,0 +1,382 @@
+Path walking and name lookup locking
+====================================
+
+Path resolution is the finding a dentry corresponding to a path name string, by
+performing a path walk. Typically, for every open(), stat() etc., the path name
+will be resolved. Paths are resolved by walking the namespace tree, starting
+with the first component of the pathname (eg. root or cwd) with a known dentry,
+then finding the child of that dentry, which is named the next component in the
+path string. Then repeating the lookup from the child dentry and finding its
+child with the next element, and so on.
+
+Since it is a frequent operation for workloads like multiuser environments and
+web servers, it is important to optimize this code.
+
+Path walking synchronisation history:
+Prior to 2.5.10, dcache_lock was acquired in d_lookup (dcache hash lookup) and
+thus in every component during path look-up. Since 2.5.10 onwards, fast-walk
+algorithm changed this by holding the dcache_lock at the beginning and walking
+as many cached path component dentries as possible. This significantly
+decreases the number of acquisition of dcache_lock. However it also increases
+the lock hold time significantly and affects performance in large SMP machines.
+Since 2.5.62 kernel, dcache has been using a new locking model that uses RCU to
+make dcache look-up lock-free.
+
+All the above algorithms required taking a lock and reference count on the
+dentry that was looked up, so that may be used as the basis for walking the
+next path element. This is inefficient and unscalable. It is inefficient
+because of the locks and atomic operations required for every dentry element
+slows things down. It is not scalable because many parallel applications that
+are path-walk intensive tend to do path lookups starting from a common dentry
+(usually, the root "/" or current working directory). So contention on these
+common path elements causes lock and cacheline queueing.
+
+Since 2.6.38, RCU is used to make a significant part of the entire path walk
+(including dcache look-up) completely "store-free" (so, no locks, atomics, or
+even stores into cachelines of common dentries). This is known as "rcu-walk"
+path walking.
+
+Path walking overview
+=====================
+
+A name string specifies a start (root directory, cwd, fd-relative) and a
+sequence of elements (directory entry names), which together refer to a path in
+the namespace. A path is represented as a (dentry, vfsmount) tuple. The name
+elements are sub-strings, seperated by '/'.
+
+Name lookups will want to find a particular path that a name string refers to
+(usually the final element, or parent of final element). This is done by taking
+the path given by the name's starting point (which we know in advance -- eg.
+current->fs->cwd or current->fs->root) as the first parent of the lookup. Then
+iteratively for each subsequent name element, look up the child of the current
+parent with the given name and if it is not the desired entry, make it the
+parent for the next lookup.
+
+A parent, of course, must be a directory, and we must have appropriate
+permissions on the parent inode to be able to walk into it.
+
+Turning the child into a parent for the next lookup requires more checks and
+procedures. Symlinks essentially substitute the symlink name for the target
+name in the name string, and require some recursive path walking.  Mount points
+must be followed into (thus changing the vfsmount that subsequent path elements
+refer to), switching from the mount point path to the root of the particular
+mounted vfsmount. These behaviours are variously modified depending on the
+exact path walking flags.
+
+Path walking then must, broadly, do several particular things:
+- find the start point of the walk;
+- perform permissions and validity checks on inodes;
+- perform dcache hash name lookups on (parent, name element) tuples;
+- traverse mount points;
+- traverse symlinks;
+- lookup and create missing parts of the path on demand.
+
+Safe store-free look-up of dcache hash table
+============================================
+
+Dcache name lookup
+------------------
+In order to lookup a dcache (parent, name) tuple, we take a hash on the tuple
+and use that to select a bucket in the dcache-hash table. The list of entries
+in that bucket is then walked, and we do a full comparison of each entry
+against our (parent, name) tuple.
+
+The hash lists are RCU protected, so list walking is not serialised with
+concurrent updates (insertion, deletion from the hash). This is a standard RCU
+list application with the exception of renames, which will be covered below.
+
+Parent and name members of a dentry, as well as its membership in the dcache
+hash, and its inode are protected by the per-dentry d_lock spinlock. A
+reference is taken on the dentry (while the fields are verified under d_lock),
+and this stabilises its d_inode pointer and actual inode. This gives a stable
+point to perform the next step of our path walk against.
+
+These members are also protected by d_seq seqlock, although this offers
+read-only protection and no durability of results, so care must be taken when
+using d_seq for synchronisation (see seqcount based lookups, below).
+
+Renames
+-------
+Back to the rename case. In usual RCU protected lists, the only operations that
+will happen to an object is insertion, and then eventually removal from the
+list. The object will not be reused until an RCU grace period is complete.
+This ensures the RCU list traversal primitives can run over the object without
+problems (see RCU documentation for how this works).
+
+However when a dentry is renamed, its hash value can change, requiring it to be
+moved to a new hash list. Allocating and inserting a new alias would be
+expensive and also problematic for directory dentries. Latency would be far to
+high to wait for a grace period after removing the dentry and before inserting
+it in the new hash bucket. So what is done is to insert the dentry into the
+new list immediately.
+
+However, when the dentry's list pointers are updated to point to objects in the
+new list before waiting for a grace period, this can result in a concurrent RCU
+lookup of the old list veering off into the new (incorrect) list and missing
+the remaining dentries on the list.
+
+There is no fundamental problem with walking down the wrong list, because the
+dentry comparisons will never match. However it is fatal to miss a matching
+dentry. So a seqlock is used to detect when a rename has occurred, and so the
+lookup can be retried.
+
+         1      2      3
+        +---+  +---+  +---+
+hlist-->| N-+->| N-+->| N-+->
+head <--+-P |<-+-P |<-+-P |
+        +---+  +---+  +---+
+
+Rename of dentry 2 may require it deleted from the above list, and inserted
+into a new list. Deleting 2 gives the following list.
+
+         1             3
+        +---+         +---+     (don't worry, the longer pointers do not
+hlist-->| N-+-------->| N-+->    impose a measurable performance overhead
+head <--+-P |<--------+-P |      on modern CPUs)
+        +---+         +---+
+          ^      2      ^
+          |    +---+    |
+          |    | N-+----+
+          +----+-P |
+               +---+
+
+This is a standard RCU-list deletion, which leaves the deleted object's
+pointers intact, so a concurrent list walker that is currently looking at
+object 2 will correctly continue to object 3 when it is time to traverse the
+next object.
+
+However, when inserting object 2 onto a new list, we end up with this:
+
+         1             3
+        +---+         +---+
+hlist-->| N-+-------->| N-+->
+head <--+-P |<--------+-P |
+        +---+         +---+
+                 2
+               +---+
+               | N-+---->
+          <----+-P |
+               +---+
+
+Because we didn't wait for a grace period, there may be a concurrent lookup
+still at 2. Now when it follows 2's 'next' pointer, it will walk off into
+another list without ever having checked object 3.
+
+A related, but distinctly different, issue is that of rename atomicity versus
+lookup operations. If a file is renamed from 'A' to 'B', a lookup must only
+find either 'A' or 'B'. So if a lookup of 'A' returns NULL, a subsequent lookup
+of 'B' must succeed (note the reverse is not true).
+
+Between deleting the dentry from the old hash list, and inserting it on the new
+hash list, a lookup may find neither 'A' nor 'B' matching the dentry. The same
+rename seqlock is also used to cover this race in much the same way, by
+retrying a negative lookup result if a rename was in progress.
+
+Seqcount based lookups
+----------------------
+In refcount based dcache lookups, d_lock is used to serialise access to
+the dentry, stabilising it while comparing its name and parent and then
+taking a reference count (the reference count then gives a stable place to
+start the next part of the path walk from).
+
+As explained above, we would like to do path walking without taking locks or
+reference counts on intermediate dentries along the path. To do this, a per
+dentry seqlock (d_seq) is used to take a "coherent snapshot" of what the dentry
+looks like (its name, parent, and inode). That snapshot is then used to start
+the next part of the path walk. When loading the coherent snapshot under d_seq,
+care must be taken to load the members up-front, and use those pointers rather
+than reloading from the dentry later on (otherwise we'd have interesting things
+like d_inode going NULL underneath us, if the name was unlinked).
+
+Also important is to avoid performing any destructive operations (pretty much:
+no non-atomic stores to shared data), and to recheck the seqcount when we are
+"done" with the operation. Retry or abort if the seqcount does not match.
+Avoiding destructive or changing operations means we can easily unwind from
+failure.
+
+What this means is that a caller, provided they are holding RCU lock to
+protect the dentry object from disappearing, can perform a seqcount based
+lookup which does not increment the refcount on the dentry or write to
+it in any way. This returned dentry can be used for subsequent operations,
+provided that d_seq is rechecked after that operation is complete.
+
+Inodes are also rcu freed, so the seqcount lookup dentry's inode may also be
+queried for permissions.
+
+With this two parts of the puzzle, we can do path lookups without taking
+locks or refcounts on dentry elements.
+
+RCU-walk path walking design
+============================
+
+Path walking code now has two distinct modes, ref-walk and rcu-walk. ref-walk
+is the traditional[*] way of performing dcache lookups using d_lock to
+serialise concurrent modifications to the dentry and take a reference count on
+it. ref-walk is simple and obvious, and may sleep, take locks, etc while path
+walking is operating on each dentry. rcu-walk uses seqcount based dentry
+lookups, and can perform lookup of intermediate elements without any stores to
+shared data in the dentry or inode. rcu-walk can not be applied to all cases,
+eg. if the filesystem must sleep or perform non trivial operations, rcu-walk
+must be switched to ref-walk mode.
+
+[*] RCU is still used for the dentry hash lookup in ref-walk, but not the full
+    path walk.
+
+Where ref-walk uses a stable, refcounted ``parent'' to walk the remaining
+path string, rcu-walk uses a d_seq protected snapshot. When looking up a
+child of this parent snapshot, we open d_seq critical section on the child
+before closing d_seq critical section on the parent. This gives an interlocking
+ladder of snapshots to walk down.
+
+
+     proc 101
+      /----------------\
+     / comm:    "vi"    \
+    /  fs.root: dentry0  \
+    \  fs.cwd:  dentry2  /
+     \                  /
+      \----------------/
+
+So when vi wants to open("/home/npiggin/test.c", O_RDWR), then it will
+start from current->fs->root, which is a pinned dentry. Alternatively,
+"./test.c" would start from cwd; both names refer to the same path in
+the context of proc101.
+
+     dentry 0
+    +---------------------+   rcu-walk begins here, we note d_seq, check the
+    | name:    "/"        |   inode's permission, and then look up the next
+    | inode:   10         |   path element which is "home"...
+    | children:"home", ...|
+    +---------------------+
+              |
+     dentry 1 V
+    +---------------------+   ... which brings us here. We find dentry1 via
+    | name:    "home"     |   hash lookup, then note d_seq and compare name
+    | inode:   678        |   string and parent pointer. When we have a match,
+    | children:"npiggin"  |   we now recheck the d_seq of dentry0. Then we
+    +---------------------+   check inode and look up the next element.
+              |
+     dentry2  V
+    +---------------------+   Note: if dentry0 is now modified, lookup is
+    | name:    "npiggin"  |   not necessarily invalid, so we need only keep a
+    | inode:   543        |   parent for d_seq verification, and grandparents
+    | children:"a.c", ... |   can be forgotten.
+    +---------------------+
+              |
+     dentry3  V
+    +---------------------+   At this point we have our destination dentry.
+    | name:    "a.c"      |   We now take its d_lock, verify d_seq of this
+    | inode:   14221      |   dentry. If that checks out, we can increment
+    | children:NULL       |   its refcount because we're holding d_lock.
+    +---------------------+
+
+Taking a refcount on a dentry from rcu-walk mode, by taking its d_lock,
+re-checking its d_seq, and then incrementing its refcount is called
+"dropping rcu" or dropping from rcu-walk into ref-walk mode.
+
+It is, in some sense, a bit of a house of cards. If the seqcount check of the
+parent snapshot fails, the house comes down, because we had closed the d_seq
+section on the grandparent, so we have nothing left to stand on. In that case,
+the path walk must be fully restarted (which we do in ref-walk mode, to avoid
+live locks). It is costly to have a full restart, but fortunately they are
+quite rare.
+
+When we reach a point where sleeping is required, or a filesystem callout
+requires ref-walk, then instead of restarting the walk, we attempt to drop rcu
+at the last known good dentry we have. Avoiding a full restart in ref-walk in
+these cases is fundamental for performance and scalability because blocking
+operations such as creates and unlinks are not uncommon.
+
+The detailed design for rcu-walk is like this:
+* LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk.
+* Take the RCU lock for the entire path walk, starting with the acquiring
+  of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are
+  not required for dentry persistence.
+* synchronize_rcu is called when unregistering a filesystem, so we can
+  access d_ops and i_ops during rcu-walk.
+* Similarly take the vfsmount lock for the entire path walk. So now mnt
+  refcounts are not required for persistence. Also we are free to perform mount
+  lookups, and to assume dentry mount points and mount roots are stable up and
+  down the path.
+* Have a per-dentry seqlock to protect the dentry name, parent, and inode,
+  so we can load this tuple atomically, and also check whether any of its
+  members have changed.
+* Dentry lookups (based on parent, candidate string tuple) recheck the parent
+  sequence after the child is found in case anything changed in the parent
+  during the path walk.
+* inode is also RCU protected so we can load d_inode and use the inode for
+  limited things.
+* i_mode, i_uid, i_gid can be tested for exec permissions during path walk.
+* i_op can be loaded.
+* When the destination dentry is reached, drop rcu there (ie. take d_lock,
+  verify d_seq, increment refcount).
+* If seqlock verification fails anywhere along the path, do a full restart
+  of the path lookup in ref-walk mode. -ECHILD tends to be used (for want of
+  a better errno) to signal an rcu-walk failure.
+
+The cases where rcu-walk cannot continue are:
+* NULL dentry (ie. any uncached path element)
+* Following links
+
+It may be possible eventually to make following links rcu-walk aware.
+
+Uncached path elements will always require dropping to ref-walk mode, at the
+very least because i_mutex needs to be grabbed, and objects allocated.
+
+Final note:
+"store-free" path walking is not strictly store free. We take vfsmount lock
+and refcounts (both of which can be made per-cpu), and we also store to the
+stack (which is essentially CPU-local), and we also have to take locks and
+refcount on final dentry.
+
+The point is that shared data, where practically possible, is not locked
+or stored into. The result is massive improvements in performance and
+scalability of path resolution.
+
+
+Interesting statistics
+======================
+
+The following table gives rcu lookup statistics for a few simple workloads
+(2s12c24t Westmere, debian non-graphical system). Ungraceful are attempts to
+drop rcu that fail due to d_seq failure and requiring the entire path lookup
+again. Other cases are successful rcu-drops that are required before the final
+element, nodentry for missing dentry, revalidate for filesystem revalidate
+routine requiring rcu drop, permission for permission check requiring drop,
+and link for symlink traversal requiring drop.
+
+     rcu-lookups     restart  nodentry          link  revalidate  permission
+bootup     47121           0      4624          1010       10283        7852
+dbench  25386793           0   6778659(26.7%)     55         549        1156
+kbuild   2696672          10     64442(2.3%)  108764(4.0%)     1        1590
+git diff   39605           0        28             2           0         106
+vfstest 24185492        4945    708725(2.9%) 1076136(4.4%)     0        2651
+
+What this shows is that failed rcu-walk lookups, ie. ones that are restarted
+entirely with ref-walk, are quite rare. Even the "vfstest" case which
+specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to excercise
+such races is not showing a huge amount of restarts.
+
+Dropping from rcu-walk to ref-walk mean that we have encountered a dentry where
+the reference count needs to be taken for some reason. This is either because
+we have reached the target of the path walk, or because we have encountered a
+condition that can't be resolved in rcu-walk mode.  Ideally, we drop rcu-walk
+only when we have reached the target dentry, so the other statistics show where
+this does not happen.
+
+Note that a graceful drop from rcu-walk mode due to something such as the
+dentry not existing (which can be common) is not necessarily a failure of
+rcu-walk scheme, because some elements of the path may have been walked in
+rcu-walk mode. The further we get from common path elements (such as cwd or
+root), the less contended the dentry is likely to be. The closer we are to
+common path elements, the more likely they will exist in dentry cache.
+
+
+Papers and other documentation on dcache locking
+================================================
+
+1. Scaling dcache with RCU (http://linuxjournal.com/article.php?sid=7124).
+
+2. http://lse.sourceforge.net/locking/dcache/dcache.html
+
+
diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting
index b12c8953868..07a32b42cf9 100644
--- a/Documentation/filesystems/porting
+++ b/Documentation/filesystems/porting
@@ -216,7 +216,6 @@ had ->revalidate()) add calls in ->follow_link()/->readlink().
 ->d_parent changes are not protected by BKL anymore.  Read access is safe
 if at least one of the following is true:
 	* filesystem has no cross-directory rename()
-	* dcache_lock is held
 	* we know that parent had been locked (e.g. we are looking at
 ->d_parent of ->lookup() argument).
 	* we are called from ->rename().
@@ -318,3 +317,71 @@ if it's zero is not *and* *never* *had* *been* enough.  Final unlink() and iput(
 may happen while the inode is in the middle of ->write_inode(); e.g. if you blindly
 free the on-disk inode, you may end up doing that while ->write_inode() is writing
 to it.
+
+---
+[mandatory]
+
+	.d_delete() now only advises the dcache as to whether or not to cache
+unreferenced dentries, and is now only called when the dentry refcount goes to
+0. Even on 0 refcount transition, it must be able to tolerate being called 0,
+1, or more times (eg. constant, idempotent).
+
+---
+[mandatory]
+
+	.d_compare() calling convention and locking rules are significantly
+changed. Read updated documentation in Documentation/filesystems/vfs.txt (and
+look at examples of other filesystems) for guidance.
+
+---
+[mandatory]
+
+	.d_hash() calling convention and locking rules are significantly
+changed. Read updated documentation in Documentation/filesystems/vfs.txt (and
+look at examples of other filesystems) for guidance.
+
+---
+[mandatory]
+	dcache_lock is gone, replaced by fine grained locks. See fs/dcache.c
+for details of what locks to replace dcache_lock with in order to protect
+particular things. Most of the time, a filesystem only needs ->d_lock, which
+protects *all* the dcache state of a given dentry.
+
+--
+[mandatory]
+
+	Filesystems must RCU-free their inodes, if they can have been accessed
+via rcu-walk path walk (basically, if the file can have had a path name in the
+vfs namespace).
+
+	i_dentry and i_rcu share storage in a union, and the vfs expects
+i_dentry to be reinitialized before it is freed, so an:
+
+  INIT_LIST_HEAD(&inode->i_dentry);
+
+must be done in the RCU callback.
+
+--
+[recommended]
+	vfs now tries to do path walking in "rcu-walk mode", which avoids
+atomic operations and scalability hazards on dentries and inodes (see
+Documentation/filesystems/path-walk.txt). d_hash and d_compare changes (above)
+are examples of the changes required to support this. For more complex
+filesystem callbacks, the vfs drops out of rcu-walk mode before the fs call, so
+no changes are required to the filesystem. However, this is costly and loses
+the benefits of rcu-walk mode. We will begin to add filesystem callbacks that
+are rcu-walk aware, shown below. Filesystems should take advantage of this
+where possible.
+
+--
+[mandatory]
+	d_revalidate is a callback that is made on every path element (if
+the filesystem provides it), which requires dropping out of rcu-walk mode. This
+may now be called in rcu-walk mode (nd->flags & LOOKUP_RCU). -ECHILD should be
+returned if the filesystem cannot handle rcu-walk. See
+Documentation/filesystems/vfs.txt for more details.
+
+	permission and check_acl are inode permission checks that are called
+on many or all directory inodes on the way down a path walk (to check for
+exec permission). These must now be rcu-walk aware (flags & IPERM_RCU). See
+Documentation/filesystems/vfs.txt for more details.
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index e73df2722ff..9471225212c 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1181,6 +1181,30 @@ Table 1-12: Files in /proc/fs/ext4/<devname>
  mb_groups       details of multiblock allocator buddy cache of free blocks
 ..............................................................................
 
+2.0 /proc/consoles
+------------------
+Shows registered system console lines.
+
+To see which character device lines are currently used for the system console
+/dev/console, you may simply look into the file /proc/consoles:
+
+  > cat /proc/consoles
+  tty0                 -WU (ECp)       4:7
+  ttyS0                -W- (Ep)        4:64
+
+The columns are:
+
+  device               name of the device
+  operations           R = can do read operations
+                       W = can do write operations
+                       U = can do unblank
+  flags                E = it is enabled
+                       C = it is prefered console
+                       B = it is primary boot console
+                       p = it is used for printk buffer
+                       b = it is not a TTY but a Braille device
+                       a = it is safe to use when cpu is offline
+  major:minor          major and minor number of the device separated by a colon
 
 ------------------------------------------------------------------------------
 Summary
diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt
index ed7e5efc06d..fbb324e2bd4 100644
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@@ -325,7 +325,8 @@ struct inode_operations {
         void * (*follow_link) (struct dentry *, struct nameidata *);
         void (*put_link) (struct dentry *, struct nameidata *, void *);
 	void (*truncate) (struct inode *);
-	int (*permission) (struct inode *, int, struct nameidata *);
+	int (*permission) (struct inode *, int, unsigned int);
+	int (*check_acl)(struct inode *, int, unsigned int);
 	int (*setattr) (struct dentry *, struct iattr *);
 	int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
 	int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
@@ -414,6 +415,13 @@ otherwise noted.
   permission: called by the VFS to check for access rights on a POSIX-like
   	filesystem.
 
+	May be called in rcu-walk mode (flags & IPERM_RCU). If in rcu-walk
+	mode, the filesystem must check the permission without blocking or
+	storing to the inode.
+
+	If a situation is encountered that rcu-walk cannot handle, return
+	-ECHILD and it will be called again in ref-walk mode.
+
   setattr: called by the VFS to set attributes for a file. This method
   	is called by chmod(2) and related system calls.
 
@@ -534,6 +542,7 @@ struct address_space_operations {
 	sector_t (*bmap)(struct address_space *, sector_t);
 	int (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, int);
+	void (*freepage)(struct page *);
 	ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
 			loff_t offset, unsigned long nr_segs);
 	struct page* (*get_xip_page)(struct address_space *, sector_t,
@@ -660,11 +669,10 @@ struct address_space_operations {
   releasepage: releasepage is called on PagePrivate pages to indicate
         that the page should be freed if possible.  ->releasepage
         should remove any private data from the page and clear the
-        PagePrivate flag.  It may also remove the page from the
-        address_space.  If this fails for some reason, it may indicate
-        failure with a 0 return value.
-	This is used in two distinct though related cases.  The first
-        is when the VM finds a clean page with no active users and
+        PagePrivate flag. If releasepage() fails for some reason, it must
+	indicate failure with a 0 return value.
+	releasepage() is used in two distinct though related cases.  The
+	first is when the VM finds a clean page with no active users and
         wants to make it a free page.  If ->releasepage succeeds, the
         page will be removed from the address_space and become free.
 
@@ -679,6 +687,12 @@ struct address_space_operations {
         need to ensure this.  Possibly it can clear the PageUptodate
         bit if it cannot free private data yet.
 
+  freepage: freepage is called once the page is no longer visible in
+        the page cache in order to allow the cleanup of any private
+	data. Since it may be called by the memory reclaimer, it
+	should not assume that the original address_space mapping still
+	exists, and it should not block.
+
   direct_IO: called by the generic read/write routines to perform
         direct_IO - that is IO requests which bypass the page cache
         and transfer data directly between the storage and the
@@ -841,9 +855,12 @@ defined:
 
 struct dentry_operations {
 	int (*d_revalidate)(struct dentry *, struct nameidata *);
-	int (*d_hash) (struct dentry *, struct qstr *);
-	int (*d_compare) (struct dentry *, struct qstr *, struct qstr *);
-	int (*d_delete)(struct dentry *);
+	int (*d_hash)(const struct dentry *, const struct inode *,
+			struct qstr *);
+	int (*d_compare)(const struct dentry *, const struct inode *,
+			const struct dentry *, const struct inode *,
+			unsigned int, const char *, const struct qstr *);
+	int (*d_delete)(const struct dentry *);
 	void (*d_release)(struct dentry *);
 	void (*d_iput)(struct dentry *, struct inode *);
 	char *(*d_dname)(struct dentry *, char *, int);
@@ -854,13 +871,45 @@ struct dentry_operations {
 	dcache. Most filesystems leave this as NULL, because all their
 	dentries in the dcache are valid
 
-  d_hash: called when the VFS adds a dentry to the hash table
+	d_revalidate may be called in rcu-walk mode (nd->flags & LOOKUP_RCU).
+	If in rcu-walk mode, the filesystem must revalidate the dentry without
+	blocking or storing to the dentry, d_parent and d_inode should not be
+	used without care (because they can go NULL), instead nd->inode should
+	be used.
+
+	If a situation is encountered that rcu-walk cannot handle, return
+	-ECHILD and it will be called again in ref-walk mode.
+
+  d_hash: called when the VFS adds a dentry to the hash table. The first
+	dentry passed to d_hash is the parent directory that the name is
+	to be hashed into. The inode is the dentry's inode.
+
+	Same locking and synchronisation rules as d_compare regarding
+	what is safe to dereference etc.
+
+  d_compare: called to compare a dentry name with a given name. The first
+	dentry is the parent of the dentry to be compared, the second is
+	the parent's inode, then the dentry and inode (may be NULL) of the
+	child dentry. len and name string are properties of the dentry to be
+	compared. qstr is the name to compare it with.
+
+	Must be constant and idempotent, and should not take locks if
+	possible, and should not or store into the dentry or inodes.
+	Should not dereference pointers outside the dentry or inodes without
+	lots of care (eg.  d_parent, d_inode, d_name should not be used).
+
+	However, our vfsmount is pinned, and RCU held, so the dentries and
+	inodes won't disappear, neither will our sb or filesystem module.
+	->i_sb and ->d_sb may be used.
 
-  d_compare: called when a dentry should be compared with another
+	It is a tricky calling convention because it needs to be called under
+	"rcu-walk", ie. without any locks or references on things.
 
-  d_delete: called when the last reference to a dentry is
-	deleted. This means no-one is using the dentry, however it is
-	still valid and in the dcache
+  d_delete: called when the last reference to a dentry is dropped and the
+	dcache is deciding whether or not to cache it. Return 1 to delete
+	immediately, or 0 to cache the dentry. Default is NULL which means to
+	always cache a reachable dentry. d_delete must be constant and
+	idempotent.
 
   d_release: called when a dentry is really deallocated
 
@@ -904,14 +953,11 @@ manipulate dentries:
 	the usage count)
 
   dput: close a handle for a dentry (decrements the usage count). If
-	the usage count drops to 0, the "d_delete" method is called
-	and the dentry is placed on the unused list if the dentry is
-	still in its parents hash list. Putting the dentry on the
-	unused list just means that if the system needs some RAM, it
-	goes through the unused list of dentries and deallocates them.
-	If the dentry has already been unhashed and the usage count
-	drops to 0, in this case the dentry is deallocated after the
-	"d_delete" method is called
+	the usage count drops to 0, and the dentry is still in its
+	parent's hash, the "d_delete" method is called to check whether
+	it should be cached. If it should not be cached, or if the dentry
+	is not hashed, it is deleted. Otherwise cached dentries are put
+	into an LRU list to be reclaimed on memory shortage.
 
   d_drop: this unhashes a dentry from its parents hash list. A
 	subsequent call to dput() will deallocate the dentry if its
diff --git a/Documentation/filesystems/xfs-delayed-logging-design.txt b/Documentation/filesystems/xfs-delayed-logging-design.txt
index 96d0df28bed..7445bf335da 100644
--- a/Documentation/filesystems/xfs-delayed-logging-design.txt
+++ b/Documentation/filesystems/xfs-delayed-logging-design.txt
@@ -794,17 +794,6 @@ designed.
 
 Roadmap:
 
-2.6.37 Remove experimental tag from mount option
-	=> should be roughly 6 months after initial merge
-	=> enough time to:
-		=> gain confidence and fix problems reported by early
-		   adopters (a.k.a. guinea pigs)
-		=> address worst performance regressions and undesired
-		   behaviours
-		=> start tuning/optimising code for parallelism
-		=> start tuning/optimising algorithms consuming
-		   excessive CPU time
-
 2.6.39 Switch default mount option to use delayed logging
 	=> should be roughly 12 months after initial merge
 	=> enough time to shake out remaining problems before next round of
diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt
index 9633da01ff4..792faa3c06c 100644
--- a/Documentation/gpio.txt
+++ b/Documentation/gpio.txt
@@ -617,6 +617,16 @@ and have the following read/write attributes:
 		is configured as an output, this value may be written;
 		any nonzero value is treated as high.
 
+		If the pin can be configured as interrupt-generating interrupt
+		and if it has been configured to generate interrupts (see the
+		description of "edge"), you can poll(2) on that file and
+		poll(2) will return whenever the interrupt was triggered. If
+		you use poll(2), set the events POLLPRI and POLLERR. If you
+		use select(2), set the file descriptor in exceptfds. After
+		poll(2) returns, either lseek(2) to the beginning of the sysfs
+		file and read the new value or close the file and re-open it
+		to read the value.
+
 	"edge" ... reads as either "none", "rising", "falling", or
 		"both". Write these strings to select the signal edge(s)
 		that will make poll(2) on the "value" file return.
diff --git a/Documentation/hwmon/lm93 b/Documentation/hwmon/lm93
index ac711f357fa..7a10616d0b4 100644
--- a/Documentation/hwmon/lm93
+++ b/Documentation/hwmon/lm93
@@ -11,7 +11,7 @@ Authors:
 	Mark M. Hoffman <mhoffman@lightlink.com>
 	Ported to 2.6 by Eric J. Bowersox <ericb@aspsys.com>
 	Adapted to 2.6.20 by Carsten Emde <ce@osadl.org>
-	Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
+	Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
 
 Module Parameters
 -----------------
diff --git a/Documentation/hwmon/max6650 b/Documentation/hwmon/max6650
index 8be7beb9e3e..c565650fcfc 100644
--- a/Documentation/hwmon/max6650
+++ b/Documentation/hwmon/max6650
@@ -8,7 +8,7 @@ Supported chips:
     Datasheet: http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
 
 Authors:
-    Hans J. Koch <hjk@linutronix.de>
+    Hans J. Koch <hjk@hansjkoch.de>
     John Morris <john.morris@spirentcom.com>
     Claus Gindhart <claus.gindhart@kontron.com>
 
diff --git a/Documentation/input/cma3000_d0x.txt b/Documentation/input/cma3000_d0x.txt
new file mode 100644
index 00000000000..29d088db4af
--- /dev/null
+++ b/Documentation/input/cma3000_d0x.txt
@@ -0,0 +1,115 @@
+Kernel driver for CMA3000-D0x
+============================
+
+Supported chips:
+* VTI CMA3000-D0x
+Datasheet:
+  CMA3000-D0X Product Family Specification 8281000A.02.pdf
+  <http://www.vti.fi/en/>
+
+Author: Hemanth V <hemanthv@ti.com>
+
+
+Description
+-----------
+CMA3000 Tri-axis accelerometer supports Motion detect, Measurement and
+Free fall modes.
+
+Motion Detect Mode: Its the low power mode where interrupts are generated only
+when motion exceeds the defined thresholds.
+
+Measurement Mode: This mode is used to read the acceleration data on X,Y,Z
+axis and supports 400, 100, 40 Hz sample frequency.
+
+Free fall Mode: This mode is intended to save system resources.
+
+Threshold values: Chip supports defining threshold values for above modes
+which includes time and g value. Refer product specifications for more details.
+
+CMA3000 chip supports mutually exclusive I2C and SPI interfaces for
+communication, currently the driver supports I2C based communication only.
+Initial configuration for bus mode is set in non volatile memory and can later
+be modified through bus interface command.
+
+Driver reports acceleration data through input subsystem. It generates ABS_MISC
+event with value 1 when free fall is detected.
+
+Platform data need to be configured for initial default values.
+
+Platform Data
+-------------
+fuzz_x: Noise on X Axis
+
+fuzz_y: Noise on Y Axis
+
+fuzz_z: Noise on Z Axis
+
+g_range: G range in milli g i.e 2000 or 8000
+
+mode: Default Operating mode
+
+mdthr: Motion detect g range threshold value
+
+mdfftmr: Motion detect and free fall time threshold value
+
+ffthr: Free fall g range threshold value
+
+Input Interface
+--------------
+Input driver version is 1.0.0
+Input device ID: bus 0x18 vendor 0x0 product 0x0 version 0x0
+Input device name: "cma3000-accelerometer"
+Supported events:
+  Event type 0 (Sync)
+  Event type 3 (Absolute)
+    Event code 0 (X)
+      Value     47
+      Min    -8000
+      Max     8000
+      Fuzz     200
+    Event code 1 (Y)
+      Value    -28
+      Min    -8000
+      Max     8000
+      Fuzz     200
+    Event code 2 (Z)
+      Value    905
+      Min    -8000
+      Max     8000
+      Fuzz     200
+    Event code 40 (Misc)
+      Value      0
+      Min        0
+      Max        1
+  Event type 4 (Misc)
+
+
+Register/Platform parameters Description
+----------------------------------------
+
+mode:
+	0: power down mode
+	1: 100 Hz Measurement mode
+	2: 400 Hz Measurement mode
+	3: 40 Hz Measurement mode
+	4: Motion Detect mode (default)
+	5: 100 Hz Free fall mode
+	6: 40 Hz Free fall mode
+	7: Power off mode
+
+grange:
+	2000: 2000 mg or 2G Range
+	8000: 8000 mg or 8G Range
+
+mdthr:
+	X: X * 71mg (8G Range)
+	X: X * 18mg (2G Range)
+
+mdfftmr:
+	X: (X & 0x70) * 100 ms (MDTMR)
+	   (X & 0x0F) * 2.5 ms (FFTMR 400 Hz)
+	   (X & 0x0F) * 10 ms  (FFTMR 100 Hz)
+
+ffthr:
+       X: (X >> 2) * 18mg (2G Range)
+       X: (X & 0x0F) * 71 mg (8G Range)
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index bdcba154b83..71536e78406 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -1,6 +1,6 @@
 Multi-touch (MT) Protocol
 -------------------------
-	Copyright (C) 2009	Henrik Rydberg <rydberg@euromail.se>
+	Copyright (C) 2009-2010	Henrik Rydberg <rydberg@euromail.se>
 
 
 Introduction
@@ -161,19 +161,24 @@ against the glass. The inner region will increase, and in general, the
 ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR, which is always smaller than
 unity, is related to the contact pressure. For pressure-based devices,
 ABS_MT_PRESSURE may be used to provide the pressure on the contact area
-instead.
+instead. Devices capable of contact hovering can use ABS_MT_DISTANCE to
+indicate the distance between the contact and the surface.
 
 In addition to the MAJOR parameters, the oval shape of the contact can be
 described by adding the MINOR parameters, such that MAJOR and MINOR are the
 major and minor axis of an ellipse. Finally, the orientation of the oval
 shape can be describe with the ORIENTATION parameter.
 
+For type A devices, further specification of the touch shape is possible
+via ABS_MT_BLOB_ID.
+
 The ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
-contact or a pen or something else.  Devices with more granular information
-may specify general shapes as blobs, i.e., as a sequence of rectangular
-shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
-that currently support it, the ABS_MT_TRACKING_ID event may be used to
-report contact tracking from hardware [5].
+finger or a pen or something else. Finally, the ABS_MT_TRACKING_ID event
+may be used to track identified contacts over time [5].
+
+In the type B protocol, ABS_MT_TOOL_TYPE and ABS_MT_TRACKING_ID are
+implicitly handled by input core; drivers should instead call
+input_mt_report_slot_state().
 
 
 Event Semantics
@@ -213,6 +218,12 @@ The pressure, in arbitrary units, on the contact area. May be used instead
 of TOUCH and WIDTH for pressure-based devices or any device with a spatial
 signal intensity distribution.
 
+ABS_MT_DISTANCE
+
+The distance, in surface units, between the contact and the surface. Zero
+distance means the contact is touching the surface. A positive number means
+the contact is hovering above the surface.
+
 ABS_MT_ORIENTATION
 
 The orientation of the ellipse. The value should describe a signed quarter
@@ -240,21 +251,24 @@ ABS_MT_TOOL_TYPE
 The type of approaching tool. A lot of kernel drivers cannot distinguish
 between different tool types, such as a finger or a pen. In such cases, the
 event should be omitted. The protocol currently supports MT_TOOL_FINGER and
-MT_TOOL_PEN [2].
+MT_TOOL_PEN [2]. For type B devices, this event is handled by input core;
+drivers should instead use input_mt_report_slot_state().
 
 ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
-contact. This is a low-level anonymous grouping for type A devices, and
+contact. The sequence of points forms a polygon which defines the shape of
+the contact. This is a low-level anonymous grouping for type A devices, and
 should not be confused with the high-level trackingID [5]. Most type A
 devices do not have blob capability, so drivers can safely omit this event.
 
 ABS_MT_TRACKING_ID
 
 The TRACKING_ID identifies an initiated contact throughout its life cycle
-[5]. This event is mandatory for type B devices. The value range of the
-TRACKING_ID should be large enough to ensure unique identification of a
-contact maintained over an extended period of time.
+[5]. The value range of the TRACKING_ID should be large enough to ensure
+unique identification of a contact maintained over an extended period of
+time. For type B devices, this event is handled by input core; drivers
+should instead use input_mt_report_slot_state().
 
 
 Event Computation
@@ -301,18 +315,19 @@ and with ORIENTATION, one can detect twisting of fingers.
 Notes
 -----
 
-In order to stay compatible with existing applications, the data
-reported in a finger packet must not be recognized as single-touch
-events. In addition, all finger data must bypass input filtering,
-since subsequent events of the same type refer to different fingers.
+In order to stay compatible with existing applications, the data reported
+in a finger packet must not be recognized as single-touch events.
+
+For type A devices, all finger data bypasses input filtering, since
+subsequent events of the same type refer to different fingers.
 
-The first kernel driver to utilize the MT protocol is the bcm5974 driver,
-where examples can be found.
+For example usage of the type A protocol, see the bcm5974 driver. For
+example usage of the type B protocol, see the hid-egalax driver.
 
 [1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
 difference between the contact position and the approaching tool position
 could be used to derive tilt.
 [2] The list can of course be extended.
-[3] Multitouch X driver project: http://bitmath.org/code/multitouch/.
+[3] The mtdev project: http://bitmath.org/code/mtdev/.
 [4] See the section on event computation.
 [5] See the section on finger tracking.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 63ffd78824d..d6a63c7b447 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -155,7 +155,6 @@ Code  Seq#(hex)	Include File		Comments
 'Q'	all	linux/soundcard.h
 'R'	00-1F	linux/random.h		conflict!
 'R'	01	linux/rfkill.h		conflict!
-'R'	01-0F	media/rds.h		conflict!
 'R'	C0-DF	net/bluetooth/rfcomm.h
 'S'	all	linux/cdrom.h		conflict!
 'S'	80-81	scsi/scsi_ioctl.h	conflict!
@@ -194,7 +193,6 @@ Code  Seq#(hex)	Include File		Comments
 					<http://lrcwww.epfl.ch/>
 'b'	00-FF				conflict! bit3 vme host bridge
 					<mailto:natalia@nikhefk.nikhef.nl>
-'b'	00-0F	media/bt819.h		conflict!
 'c'	all	linux/cm4000_cs.h	conflict!
 'c'	00-7F	linux/comstats.h	conflict!
 'c'	00-7F	linux/coda.h		conflict!
@@ -260,14 +258,11 @@ Code  Seq#(hex)	Include File		Comments
 't'	80-8F	linux/isdn_ppp.h
 't'	90	linux/toshiba.h
 'u'	00-1F	linux/smb_fs.h		gone
-'v'	all	linux/videodev.h	conflict!
 'v'	00-1F	linux/ext2_fs.h		conflict!
 'v'	00-1F	linux/fs.h		conflict!
 'v'	00-0F	linux/sonypi.h		conflict!
-'v'	C0-CF	drivers/media/video/ov511.h	conflict!
 'v'	C0-DF	media/pwc-ioctl.h	conflict!
 'v'	C0-FF	linux/meye.h		conflict!
-'v'	C0-CF	drivers/media/video/zoran/zoran.h	conflict!
 'v'	D0-DF	drivers/media/video/cpia2/cpia2dev.h	conflict!
 'w'	all				CERN SCI driver
 'y'	00-1F				packet based user level communications
@@ -278,7 +273,6 @@ Code  Seq#(hex)	Include File		Comments
 					<mailto:oe@port.de>
 'z'	10-4F	drivers/s390/crypto/zcrypt_api.h	conflict!
 0x80	00-1F	linux/fb.h
-0x88	00-3F	media/ovcamchip.h
 0x89	00-06	arch/x86/include/asm/sockios.h
 0x89	0B-DF	linux/sockios.h
 0x89	E0-EF	linux/sockios.h		SIOCPROTOPRIVATE range
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index 715eaaf1519..9a8674629a0 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -537,7 +537,7 @@
        Notes: Further information in
        http://www.oreilly.com/catalog/linuxdrive2/
 
-     * Title: "Linux Device Drivers, 3nd Edition"
+     * Title: "Linux Device Drivers, 3rd Edition"
        Authors: Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman
        Publisher: O'Reilly & Associates.
        Date: 2005.
@@ -592,14 +592,6 @@
        Pages: 600.
        ISBN: 0-13-101908-2
 
-     * Title:  "The  Design  and Implementation of the 4.4 BSD UNIX
-       Operating System"
-       Author: Marshall Kirk McKusick, Keith Bostic, Michael J. Karels,
-       John S. Quarterman.
-       Publisher: Addison-Wesley.
-       Date: 1996.
-       ISBN: 0-201-54979-4
-
      * Title: "Programming for the real world - POSIX.4"
        Author: Bill O. Gallmeister.
        Publisher: O'Reilly & Associates, Inc..
@@ -610,28 +602,13 @@
        POSIX. Good reference.
 
      * Title:  "UNIX  Systems  for  Modern Architectures: Symmetric
-       Multiprocesssing and Caching for Kernel Programmers"
+       Multiprocessing and Caching for Kernel Programmers"
        Author: Curt Schimmel.
        Publisher: Addison Wesley.
        Date: June, 1994.
        Pages: 432.
        ISBN: 0-201-63338-8
 
-     * Title:  "The  Design  and Implementation of the 4.3 BSD UNIX
-       Operating System"
-       Author: Samuel J. Leffler, Marshall Kirk McKusick, Michael J.
-       Karels, John S. Quarterman.
-       Publisher: Addison-Wesley.
-       Date: 1989 (reprinted with corrections on October, 1990).
-       ISBN: 0-201-06196-1
-
-     * Title: "The Design of the UNIX Operating System"
-       Author: Maurice J. Bach.
-       Publisher: Prentice Hall.
-       Date: 1986.
-       Pages: 471.
-       ISBN: 0-13-201757-1
-
      MISCELLANEOUS:
 
      * Name: linux/Documentation
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index ed45e9802aa..f3dc951e949 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -706,7 +706,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			arch/x86/kernel/cpu/cpufreq/elanfreq.c.
 
 	elevator=	[IOSCHED]
-			Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
+			Format: {"cfq" | "deadline" | "noop"}
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 
@@ -1579,20 +1579,12 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nmi_watchdog=	[KNL,BUGS=X86] Debugging features for SMP kernels
 			Format: [panic,][num]
-			Valid num: 0,1,2
+			Valid num: 0
 			0 - turn nmi_watchdog off
-			1 - use the IO-APIC timer for the NMI watchdog
-			2 - use the local APIC for the NMI watchdog using
-			a performance counter. Note: This will use one
-			performance counter and the local APIC's performance
-			vector.
 			When panic is specified, panic when an NMI watchdog
 			timeout occurs.
 			This is useful when you use a panic=... timeout and
 			need the box quickly up again.
-			Instead of 1 and 2 it is possible to use the following
-			symbolic names: lapic and ioapic
-			Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic
 
 	netpoll.carrier_timeout=
 			[NET] Specifies amount of time (in seconds) that
@@ -1622,6 +1614,8 @@ and is between 256 and 4096 characters. It is defined in the file
 	noapic		[SMP,APIC] Tells the kernel to not make use of any
 			IOAPICs that may be present in the system.
 
+	noautogroup	Disable scheduler automatic task group creation.
+
 	nobats		[PPC] Do not use BATs for mapping kernel lowmem
 			on "Classic" PPC cores.
 
@@ -1759,7 +1753,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nousb		[USB] Disable the USB subsystem
 
-	nowatchdog	[KNL] Disable the lockup detector.
+	nowatchdog	[KNL] Disable the lockup detector (NMI watchdog).
 
 	nowb		[ARM]
 
@@ -2175,11 +2169,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	reset_devices	[KNL] Force drivers to reset the underlying device
 			during initialization.
 
-	resource_alloc_from_bottom
-			Allocate new resources from the beginning of available
-			space, not the end.  If you need to use this, please
-			report a bug.
-
 	resume=		[SWSUSP]
 			Specify the partition device for software suspend
 
@@ -2385,6 +2374,11 @@ and is between 256 and 4096 characters. It is defined in the file
 			improve throughput, but will also increase the
 			amount of memory reserved for use by the client.
 
+	swapaccount[=0|1]
+			[KNL] Enable accounting of swap in memory resource
+			controller if no parameter or 1 is given or disable
+			it if 0 is given (See Documentation/cgroups/memory.txt)
+
 	swiotlb=	[IA-64] Number of I/O TLB slabs
 
 	switches=	[HW,M68k]
@@ -2467,12 +2461,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			to facilitate early boot debugging.
 			See also Documentation/trace/events.txt
 
-	tsc=		Disable clocksource-must-verify flag for TSC.
+	tsc=		Disable clocksource stability checks for TSC.
 			Format: <string>
 			[x86] reliable: mark tsc clocksource as reliable, this
-			disables clocksource verification at runtime.
-			Used to enable high-resolution timer mode on older
-			hardware, and in virtualized environment.
+			disables clocksource verification at runtime, as well
+			as the stability checks done at bootup.	Used to enable
+			high-resolution timer mode on older hardware, and in
+			virtualized environment.
 			[x86] noirqtime: Do not use TSC to do irq accounting.
 			Used to run time disable IRQ_TIME_ACCOUNTING on any
 			platforms where RDTSC is slow and this accounting
diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt
index 8fd5ca2ae32..58b266bd184 100644
--- a/Documentation/leds-class.txt
+++ b/Documentation/leds-class.txt
@@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs
 
 Some LEDs can be programmed to blink without any CPU interaction. To
 support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemented, triggers can
-attempt to use it before falling back to software timers. The blink_set()
-function should return 0 if the blink setting is supported, or -EINVAL
-otherwise, which means that LED blinking will be handled by software.
-
-The blink_set() function should choose a user friendly blinking
-value if it is called with *delay_on==0 && *delay_off==0 parameters. In
-this case the driver should give back the chosen value through delay_on
-and delay_off parameters to the leds subsystem.
+blink_set() function (see <linux/leds.h>). To set an LED to blinking,
+however, it is better to use use the API function led_blink_set(),
+as it will check and implement software fallback if necessary.
+
+To turn off blinking again, use the API function led_brightness_set()
+as that will not just set the LED brightness but also stop any software
+timers that may have been required for blinking.
+
+The blink_set() function should choose a user friendly blinking value
+if it is called with *delay_on==0 && *delay_off==0 parameters. In this
+case the driver should give back the chosen value through delay_on and
+delay_off parameters to the leds subsystem.
 
 Setting the brightness to zero with brightness_set() callback function
 should completely turn off the LED and cancel the previously programmed
diff --git a/Documentation/leds/leds-lp5521.txt b/Documentation/leds/leds-lp5521.txt
new file mode 100644
index 00000000000..c4d8d151e0f
--- /dev/null
+++ b/Documentation/leds/leds-lp5521.txt
@@ -0,0 +1,88 @@
+Kernel driver for lp5521
+========================
+
+* National Semiconductor LP5521 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5521.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+
+LP5521 can drive up to 3 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5521:channelx, where x is 0 .. 2
+
+All three channels can be also controlled using the engine micro programs.
+More details of the instructions can be found from the public data sheet.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : store program (visible only in engine load mode)
+
+Example (start to blink the channel 2 led):
+cd   /sys/class/leds/lp5521:channel2/device
+echo "load" > engine3_mode
+echo "037f4d0003ff6000" > engine3_load
+echo "run" > engine3_mode
+
+stop the engine:
+echo "disabled" > engine3_mode
+
+sysfs contains a selftest entry.
+The test communicates with the chip and checks that
+the clock mode is automatically set to the requested one.
+
+Each channel has its own led current settings.
+/sys/class/leds/lp5521:channel0/led_current - RW
+/sys/class/leds/lp5521:channel0/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+example platform data:
+
+Note: chan_nr can have values between 0 and 2.
+
+static struct lp5521_led_config lp5521_led_config[] = {
+        {
+                .chan_nr        = 0,
+                .led_current    = 50,
+		.max_current    = 130,
+        }, {
+                .chan_nr        = 1,
+                .led_current    = 0,
+		.max_current    = 130,
+        }, {
+                .chan_nr        = 2,
+                .led_current    = 0,
+		.max_current    = 130,
+        }
+};
+
+static int lp5521_setup(void)
+{
+	/* setup HW resources */
+}
+
+static void lp5521_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5521_enable(bool state)
+{
+	/* Control of chip enable signal */
+}
+
+static struct lp5521_platform_data lp5521_platform_data = {
+        .led_config     = lp5521_led_config,
+        .num_channels   = ARRAY_SIZE(lp5521_led_config),
+        .clock_mode     = LP5521_CLOCK_EXT,
+        .setup_resources   = lp5521_setup,
+        .release_resources = lp5521_release,
+        .enable            = lp5521_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.
diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt
new file mode 100644
index 00000000000..fad2feb8b7c
--- /dev/null
+++ b/Documentation/leds/leds-lp5523.txt
@@ -0,0 +1,83 @@
+Kernel driver for lp5523
+========================
+
+* National Semiconductor LP5523 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5523.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+LP5523 can drive up to 9 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5523:channelx where x is 0...8
+
+The chip provides 3 engines. Each engine can control channels without
+interaction from the main CPU. Details of the micro engine code can be found
+from the public data sheet. Leds can be muxed to different channels.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : microcode load (visible only in load mode)
+enginex_leds : led mux control (visible only in load mode)
+
+cd /sys/class/leds/lp5523:channel2/device
+echo "load" > engine3_mode
+echo "9d80400004ff05ff437f0000" > engine3_load
+echo "111111111" > engine3_leds
+echo "run" > engine3_mode
+
+sysfs contains a selftest entry. It measures each channel
+voltage level and checks if it looks reasonable. If the level is too high,
+the led is missing; if the level is too low, there is a short circuit.
+
+Selftest uses always the current from the platform data.
+
+Each channel contains led current settings.
+/sys/class/leds/lp5523:channel2/led_current - RW
+/sys/class/leds/lp5523:channel2/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+Example platform data:
+
+Note - chan_nr can have values between 0 and 8.
+
+static struct lp5523_led_config lp5523_led_config[] = {
+        {
+                .chan_nr        = 0,
+                .led_current    = 50,
+		.max_current    = 130,
+        },
+...
+        }, {
+                .chan_nr        = 8,
+                .led_current    = 50,
+		.max_current    = 130,
+        }
+};
+
+static int lp5523_setup(void)
+{
+	/* Setup HW resources */
+}
+
+static void lp5523_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5523_enable(bool state)
+{
+	/* Control chip enable signal */
+}
+
+static struct lp5523_platform_data lp5523_platform_data = {
+        .led_config     = lp5523_led_config,
+        .num_channels   = ARRAY_SIZE(lp5523_led_config),
+        .clock_mode     = LP5523_CLOCK_EXT,
+        .setup_resources   = lp5523_setup,
+        .release_resources = lp5523_release,
+        .enable            = lp5523_enable,
+};
diff --git a/Documentation/networking/LICENSE.qlcnic b/Documentation/networking/LICENSE.qlcnic
new file mode 100644
index 00000000000..29ad4b10642
--- /dev/null
+++ b/Documentation/networking/LICENSE.qlcnic
@@ -0,0 +1,327 @@
+Copyright (c) 2009-2010 QLogic Corporation
+QLogic Linux qlcnic NIC Driver
+
+This program includes a device driver for Linux 2.6 that may be
+distributed with QLogic hardware specific firmware binary file.
+You may modify and redistribute the device driver code under the
+GNU General Public License (a copy of which is attached hereto as
+Exhibit A) published by the Free Software Foundation (version 2).
+
+You may redistribute the hardware specific firmware binary file
+under the following terms:
+
+       1. Redistribution of source code (only if applicable),
+          must retain the above copyright notice, this list of
+          conditions and the following disclaimer.
+
+       2. Redistribution in binary form must reproduce the above
+          copyright notice, this list of conditions and the
+          following disclaimer in the documentation and/or other
+          materials provided with the distribution.
+
+       3. The name of QLogic Corporation may not be used to
+          endorse or promote products derived from this software
+          without specific prior written permission
+
+REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
+THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
+EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
+CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
+OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
+TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
+ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
+COMBINATION WITH THIS PROGRAM.
+
+
+EXHIBIT A
+
+                   GNU GENERAL PUBLIC LICENSE
+                      Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                           Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                   GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+                           NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
new file mode 100644
index 00000000000..77f0cdd5b0d
--- /dev/null
+++ b/Documentation/networking/batman-adv.txt
@@ -0,0 +1,240 @@
+[state: 21-11-2010]
+
+BATMAN-ADV
+----------
+
+Batman  advanced  is  a new approach to wireless networking which
+does no longer operate on the IP basis. Unlike the batman daemon,
+which  exchanges  information  using UDP packets and sets routing
+tables, batman-advanced operates on ISO/OSI Layer 2 only and uses
+and  routes  (or  better: bridges) Ethernet Frames. It emulates a
+virtual network switch of all nodes participating.  Therefore all
+nodes  appear  to be link local, thus all higher operating proto-
+cols won't be affected by any changes within the network. You can
+run almost any protocol above batman advanced, prominent examples
+are: IPv4, IPv6, DHCP, IPX.
+
+Batman advanced was implemented as a Linux kernel driver  to  re-
+duce the overhead to a minimum. It does not depend on any (other)
+network driver, and can be used on wifi as well as ethernet  lan,
+vpn,  etc ... (anything with ethernet-style layer 2).
+
+CONFIGURATION
+-------------
+
+Load the batman-adv module into your kernel:
+
+# insmod batman-adv.ko
+
+The  module  is now waiting for activation. You must add some in-
+terfaces on which batman can operate. After  loading  the  module
+batman  advanced  will scan your systems interfaces to search for
+compatible interfaces. Once found, it will create  subfolders  in
+the /sys directories of each supported interface, e.g.
+
+# ls /sys/class/net/eth0/batman_adv/
+# iface_status  mesh_iface
+
+If an interface does not have the "batman_adv" subfolder it prob-
+ably is not supported. Not supported  interfaces  are:  loopback,
+non-ethernet and batman's own interfaces.
+
+Note:  After the module was loaded it will continuously watch for
+new interfaces to verify the compatibility. There is no  need  to
+reload the module if you plug your USB wifi adapter into your ma-
+chine after batman advanced was initially loaded.
+
+To activate a  given  interface  simply  write  "bat0"  into  its
+"mesh_iface" file inside the batman_adv subfolder:
+
+# echo bat0 > /sys/class/net/eth0/batman_adv/mesh_iface
+
+Repeat  this step for all interfaces you wish to add.  Now batman
+starts using/broadcasting on this/these interface(s).
+
+By reading the "iface_status" file you can check its status:
+
+# cat /sys/class/net/eth0/batman_adv/iface_status
+# active
+
+To deactivate an interface you have  to  write  "none"  into  its
+"mesh_iface" file:
+
+# echo none > /sys/class/net/eth0/batman_adv/mesh_iface
+
+
+All  mesh  wide  settings  can be found in batman's own interface
+folder:
+
+#  ls  /sys/class/net/bat0/mesh/
+#  aggregated_ogms  bonding  fragmentation  orig_interval
+#  vis_mode
+
+
+There is a special folder for debugging informations:
+
+#  ls /sys/kernel/debug/batman_adv/bat0/
+#  originators  socket  transtable_global  transtable_local
+#  vis_data
+
+
+Some of the files contain all sort of status information  regard-
+ing  the  mesh  network.  For  example, you can view the table of
+originators (mesh participants) with:
+
+# cat /sys/kernel/debug/batman_adv/bat0/originators
+
+Other files allow to change batman's behaviour to better fit your
+requirements.  For instance, you can check the current originator
+interval (value in milliseconds which determines how often batman
+sends its broadcast packets):
+
+# cat /sys/class/net/bat0/mesh/orig_interval
+# 1000
+
+and also change its value:
+
+# echo 3000 > /sys/class/net/bat0/mesh/orig_interval
+
+In very mobile scenarios, you might want to adjust the originator
+interval to a lower value. This will make the mesh  more  respon-
+sive to topology changes, but will also increase the overhead.
+
+
+USAGE
+-----
+
+To  make use of your newly created mesh, batman advanced provides
+a new interface "bat0" which you should use from this  point  on.
+All  interfaces  added  to  batman  advanced are not relevant any
+longer because batman handles them for you. Basically, one "hands
+over" the data by using the batman interface and batman will make
+sure it reaches its destination.
+
+The "bat0" interface can be used like any  other  regular  inter-
+face.  It needs an IP address which can be either statically con-
+figured or dynamically (by using DHCP or similar services):
+
+# NodeA: ifconfig bat0 192.168.0.1
+# NodeB: ifconfig bat0 192.168.0.2
+# NodeB: ping 192.168.0.1
+
+Note:  In  order to avoid problems remove all IP addresses previ-
+ously assigned to interfaces now used by batman advanced, e.g.
+
+# ifconfig eth0 0.0.0.0
+
+
+VISUALIZATION
+-------------
+
+If you want topology visualization, at least one mesh  node  must
+be configured as VIS-server:
+
+# echo "server" > /sys/class/net/bat0/mesh/vis_mode
+
+Each  node  is  either configured as "server" or as "client" (de-
+fault: "client").  Clients send their topology data to the server
+next to them, and server synchronize with other servers. If there
+is no server configured (default) within the  mesh,  no  topology
+information   will  be  transmitted.  With  these  "synchronizing
+servers", there can be 1 or more vis servers sharing the same (or
+at least very similar) data.
+
+When  configured  as  server,  you can get a topology snapshot of
+your mesh:
+
+# cat /sys/kernel/debug/batman_adv/bat0/vis_data
+
+This raw output is intended to be easily parsable and convertable
+with  other tools. Have a look at the batctl README if you want a
+vis output in dot or json format for instance and how those  out-
+puts could then be visualised in an image.
+
+The raw format consists of comma separated values per entry where
+each entry is giving information about a  certain  source  inter-
+face.  Each  entry can/has to have the following values:
+-> "mac" - mac address of an originator's source interface
+           (each line begins with it)
+-> "TQ mac  value"  -  src mac's link quality towards mac address
+                       of a neighbor originator's interface which
+                       is being used for routing
+-> "HNA mac" - HNA announced by source mac
+-> "PRIMARY" - this  is a primary interface
+-> "SEC mac" - secondary mac address of source
+               (requires preceding PRIMARY)
+
+The TQ value has a range from 4 to 255 with 255 being  the  best.
+The HNA entries are showing which hosts are connected to the mesh
+via bat0 or being bridged into the mesh network.  The PRIMARY/SEC
+values are only applied on primary interfaces
+
+
+LOGGING/DEBUGGING
+-----------------
+
+All error messages, warnings and information messages are sent to
+the kernel log. Depending on your operating  system  distribution
+this  can  be read in one of a number of ways. Try using the com-
+mands: dmesg, logread, or looking in the files  /var/log/kern.log
+or  /var/log/syslog.  All  batman-adv  messages are prefixed with
+"batman-adv:" So to see just these messages try
+
+# dmesg | grep batman-adv
+
+When investigating problems with your mesh network  it  is  some-
+times  necessary  to see more detail debug messages. This must be
+enabled when compiling the batman-adv module. When building  bat-
+man-adv  as  part of kernel, use "make menuconfig" and enable the
+option "B.A.T.M.A.N. debugging".
+
+Those additional  debug messages can be accessed  using a special
+file in debugfs
+
+# cat /sys/kernel/debug/batman_adv/bat0/log
+
+The additional debug output is by default disabled. It can be en-
+abled  during run time. Following log_levels are defined:
+
+0 - All  debug  output  disabled
+1 - Enable messages related to routing / flooding / broadcasting
+2 - Enable route or hna added / changed / deleted
+3 - Enable all messages
+
+The debug output can be changed at runtime  using  the  file
+/sys/class/net/bat0/mesh/log_level. e.g.
+
+# echo 2 > /sys/class/net/bat0/mesh/log_level
+
+will enable debug messages for when routes or HNAs change.
+
+
+BATCTL
+------
+
+As batman advanced operates on layer 2 all hosts participating in
+the  virtual switch are completely transparent for all  protocols
+above layer 2. Therefore the common diagnosis tools do  not  work
+as  expected.  To  overcome these problems batctl was created. At
+the  moment the  batctl contains ping,  traceroute,  tcpdump  and
+interfaces to the kernel module settings.
+
+For more information, please see the manpage (man batctl).
+
+batctl is available on http://www.open-mesh.org/
+
+
+CONTACT
+-------
+
+Please send us comments, experiences, questions, anything :)
+
+IRC:            #batman   on   irc.freenode.org
+Mailing-list:   b.a.t.m.a.n@b.a.t.m.a.n@lists.open-mesh.org
+                (optional   subscription   at
+                 https://lists.open-mesh.org/mm/listinfo/b.a.t.m.a.n)
+
+You can also contact the Authors:
+
+Marek  Lindner  <lindner_marek@yahoo.de>
+Simon  Wunderlich  <siwu@hrz.tu-chemnitz.de>
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index 271d524a4c8..b395ca6a49f 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -47,6 +47,26 @@ http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree
 
 Socket options
 ==============
+DCCP_SOCKOPT_QPOLICY_ID sets the dequeuing policy for outgoing packets. It takes
+a policy ID as argument and can only be set before the connection (i.e. changes
+during an established connection are not supported). Currently, two policies are
+defined: the "simple" policy (DCCPQ_POLICY_SIMPLE), which does nothing special,
+and a priority-based variant (DCCPQ_POLICY_PRIO). The latter allows to pass an
+u32 priority value as ancillary data to sendmsg(), where higher numbers indicate
+a higher packet priority (similar to SO_PRIORITY). This ancillary data needs to
+be formatted using a cmsg(3) message header filled in as follows:
+	cmsg->cmsg_level = SOL_DCCP;
+	cmsg->cmsg_type	 = DCCP_SCM_PRIORITY;
+	cmsg->cmsg_len	 = CMSG_LEN(sizeof(uint32_t));	/* or CMSG_LEN(4) */
+
+DCCP_SOCKOPT_QPOLICY_TXQLEN sets the maximum length of the output queue. A zero
+value is always interpreted as unbounded queue length. If different from zero,
+the interpretation of this parameter depends on the current dequeuing policy
+(see above): the "simple" policy will enforce a fixed queue size by returning
+EAGAIN, whereas the "prio" policy enforces a fixed queue length by dropping the
+lowest-priority packet first. The default value for this parameter is
+initialised from /proc/sys/net/dccp/default/tx_qlen.
+
 DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
 service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
 the socket will fall back to 0 (which means that no meaningful service code
diff --git a/Documentation/networking/e100.txt b/Documentation/networking/e100.txt
index 944aa55e79f..162f323a7a1 100644
--- a/Documentation/networking/e100.txt
+++ b/Documentation/networking/e100.txt
@@ -72,7 +72,7 @@ Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data
    ethtool -G eth? tx n, where n is the number of desired tx descriptors.
 
 Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
-   default. Ethtool can be used as follows to force speed/duplex.
+   default. The ethtool utility can be used as follows to force speed/duplex.
 
    ethtool -s eth?  autoneg off speed {10|100} duplex {full|half}
 
@@ -126,30 +126,21 @@ Additional Configurations
   -------
 
   The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.  Ethtool
+  diagnostics, as well as displaying statistical information.  The ethtool
   version 1.6 or later is required for this functionality.
 
   The latest release of ethtool can be found from
-  http://sourceforge.net/projects/gkernel.
-
-  NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
-  for a more complete ethtool feature set can be enabled by upgrading
-  ethtool to ethtool-1.8.1.
-
+  http://ftp.kernel.org/pub/software/network/ethtool/
 
   Enabling Wake on LAN* (WoL)
   ---------------------------
-  WoL is provided through the Ethtool* utility. Ethtool is included with Red
-  Hat* 8.0. For other Linux distributions, download and install Ethtool from
-  the following website: http://sourceforge.net/projects/gkernel.
-
-  For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
+  WoL is provided through the ethtool* utility.  For instructions on enabling
+  WoL with ethtool, refer to the ethtool man page.
 
   WoL will be enabled on the system during the next shut down or reboot. For
   this driver version, in order to enable WoL, the e100 driver must be
   loaded when shutting down or rebooting the system.
 
-
   NAPI
   ----
 
diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt
index d9271e74e48..71ca9585567 100644
--- a/Documentation/networking/e1000.txt
+++ b/Documentation/networking/e1000.txt
@@ -79,7 +79,7 @@ InterruptThrottleRate
 ---------------------
 (not supported on Intel(R) 82542, 82543 or 82544-based adapters)
 Valid Range:   0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative,
-                                   4=simplified balancing)
+                                 4=simplified balancing)
 Default Value: 3
 
 The driver can limit the amount of interrupts per second that the adapter
@@ -124,8 +124,8 @@ InterruptThrottleRate is set to mode 1. In this mode, which operates
 the same as mode 3, the InterruptThrottleRate will be increased stepwise to
 70000 for traffic in class "Lowest latency".
 
-In simplified mode the interrupt rate is based on the ratio of Tx and
-Rx traffic.  If the bytes per second rate is approximately equal, the
+In simplified mode the interrupt rate is based on the ratio of TX and
+RX traffic.  If the bytes per second rate is approximately equal, the
 interrupt rate will drop as low as 2000 interrupts per second.  If the
 traffic is mostly transmit or mostly receive, the interrupt rate could
 be as high as 8000.
@@ -245,7 +245,7 @@ NOTE:  Depending on the available system resources, the request for a
 TxDescriptorStep
 ----------------
 Valid Range:    1 (use every Tx Descriptor)
-		4 (use every 4th Tx Descriptor)
+                4 (use every 4th Tx Descriptor)
 
 Default Value:  1 (use every Tx Descriptor)
 
@@ -312,7 +312,7 @@ Valid Range:   0-xxxxxxx (0=off)
 Default Value: 256
 Usage: insmod e1000.ko copybreak=128
 
-Driver copies all packets below or equaling this size to a fresh Rx
+Driver copies all packets below or equaling this size to a fresh RX
 buffer before handing it up the stack.
 
 This parameter is different than other parameters, in that it is a
@@ -431,15 +431,15 @@ Additional Configurations
   Ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.  Ethtool
+  diagnostics, as well as displaying statistical information.  The ethtool
   version 1.6 or later is required for this functionality.
 
   The latest release of ethtool can be found from
-  http://sourceforge.net/projects/gkernel.
+  http://ftp.kernel.org/pub/software/network/ethtool/
 
   Enabling Wake on LAN* (WoL)
   ---------------------------
-  WoL is configured through the Ethtool* utility.
+  WoL is configured through the ethtool* utility.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the e1000 driver must be
diff --git a/Documentation/networking/e1000e.txt b/Documentation/networking/e1000e.txt
index 6aa048badf3..97b5ba942eb 100644
--- a/Documentation/networking/e1000e.txt
+++ b/Documentation/networking/e1000e.txt
@@ -1,5 +1,5 @@
 Linux* Driver for Intel(R) Network Connection
-===============================================================
+=============================================
 
 Intel Gigabit Linux driver.
 Copyright(c) 1999 - 2010 Intel Corporation.
@@ -61,6 +61,12 @@ per second, even if more packets have come in. This reduces interrupt
 load on the system and can lower CPU utilization under heavy load,
 but will increase latency as packets are not processed as quickly.
 
+The default behaviour of the driver previously assumed a static
+InterruptThrottleRate value of 8000, providing a good fallback value for
+all traffic types, but lacking in small packet performance and latency.
+The hardware can handle many more small packets per second however, and
+for this reason an adaptive interrupt moderation algorithm was implemented.
+
 The driver has two adaptive modes (setting 1 or 3) in which
 it dynamically adjusts the InterruptThrottleRate value based on the traffic
 that it receives. After determining the type of incoming traffic in the last
@@ -86,8 +92,8 @@ InterruptThrottleRate is set to mode 1. In this mode, which operates
 the same as mode 3, the InterruptThrottleRate will be increased stepwise to
 70000 for traffic in class "Lowest latency".
 
-In simplified mode the interrupt rate is based on the ratio of Tx and
-Rx traffic.  If the bytes per second rate is approximately equal the
+In simplified mode the interrupt rate is based on the ratio of TX and
+RX traffic.  If the bytes per second rate is approximately equal, the
 interrupt rate will drop as low as 2000 interrupts per second.  If the
 traffic is mostly transmit or mostly receive, the interrupt rate could
 be as high as 8000.
@@ -177,7 +183,7 @@ Copybreak
 Valid Range:   0-xxxxxxx (0=off)
 Default Value: 256
 
-Driver copies all packets below or equaling this size to a fresh Rx
+Driver copies all packets below or equaling this size to a fresh RX
 buffer before handing it up the stack.
 
 This parameter is different than other parameters, in that it is a
@@ -223,17 +229,17 @@ loading or enabling the driver, try disabling this feature.
 
 WriteProtectNVM
 ---------------
-Valid Range: 0-1
-Default Value: 1 (enabled)
-
-Set the hardware to ignore all write/erase cycles to the GbE region in the
-ICHx NVM (non-volatile memory).  This feature can be disabled by the
-WriteProtectNVM module parameter (enabled by default) only after a hardware
-reset, but the machine must be power cycled before trying to enable writes.
-
-Note: the kernel boot option iomem=relaxed may need to be set if the kernel
-config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the
-NVM from user space via ethtool.
+Valid Range: 0,1
+Default Value: 1
+
+If set to 1, configure the hardware to ignore all write/erase cycles to the
+GbE region in the ICHx NVM (in order to prevent accidental corruption of the
+NVM). This feature can be disabled by setting the parameter to 0 during initial
+driver load.
+NOTE: The machine must be power cycled (full off/on) when enabling NVM writes
+via setting the parameter to zero. Once the NVM has been locked (via the
+parameter at 1 when the driver loads) it cannot be unlocked except via power
+cycle.
 
 Additional Configurations
 =========================
@@ -259,32 +265,30 @@ Additional Configurations
   - Some adapters limit Jumbo Frames sized packets to a maximum of
     4096 bytes and some adapters do not support Jumbo Frames.
 
-
   Ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
   diagnostics, as well as displaying statistical information.  We
-  strongly recommend downloading the latest version of Ethtool at:
+  strongly recommend downloading the latest version of ethtool at:
 
-  http://sourceforge.net/projects/gkernel.
+  http://ftp.kernel.org/pub/software/network/ethtool/
 
   Speed and Duplex
   ----------------
-  Speed and Duplex are configured through the Ethtool* utility. For
-  instructions,  refer to the Ethtool man page.
+  Speed and Duplex are configured through the ethtool* utility. For
+  instructions,  refer to the ethtool man page.
 
   Enabling Wake on LAN* (WoL)
   ---------------------------
-  WoL is configured through the Ethtool* utility. For instructions on
-  enabling WoL with Ethtool, refer to the Ethtool man page.
+  WoL is configured through the ethtool* utility. For instructions on
+  enabling WoL with ethtool, refer to the ethtool man page.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the e1000e driver must be
   loaded when shutting down or rebooting the system.
 
   In most cases Wake On LAN is only supported on port A for multiple port
-  adapters. To verify if a port supports Wake on LAN run ethtool eth<X>.
-
+  adapters. To verify if a port supports Wake on Lan run ethtool eth<X>.
 
 Support
 =======
diff --git a/Documentation/networking/igb.txt b/Documentation/networking/igb.txt
index ab2d7183189..98953c0d534 100644
--- a/Documentation/networking/igb.txt
+++ b/Documentation/networking/igb.txt
@@ -36,6 +36,7 @@ Default Value: 0
 This parameter adds support for SR-IOV.  It causes the driver to spawn up to
 max_vfs worth of virtual function.
 
+
 Additional Configurations
 =========================
 
@@ -60,15 +61,16 @@ Additional Configurations
   Ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.
+  diagnostics, as well as displaying statistical information. The latest
+  version of ethtool can be found at:
 
-  http://sourceforge.net/projects/gkernel.
+  http://ftp.kernel.org/pub/software/network/ethtool/
 
   Enabling Wake on LAN* (WoL)
   ---------------------------
-  WoL is configured through the Ethtool* utility.
+  WoL is configured through the ethtool* utility.
 
-  For instructions on enabling WoL with Ethtool, refer to the Ethtool man page.
+  For instructions on enabling WoL with ethtool, refer to the ethtool man page.
 
   WoL will be enabled on the system during the next shut down or reboot.
   For this driver version, in order to enable WoL, the igb driver must be
@@ -91,31 +93,6 @@ Additional Configurations
   REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not
   found, the system will fallback to MSI or to Legacy interrupts.
 
-  LRO
-  ---
-  Large Receive Offload (LRO) is a technique for increasing inbound throughput
-  of high-bandwidth network connections by reducing CPU overhead. It works by
-  aggregating multiple incoming packets from a single stream into a larger
-  buffer before they are passed higher up the networking stack, thus reducing
-  the number of packets that have to be processed. LRO combines multiple
-  Ethernet frames into a single receive in the stack, thereby potentially
-  decreasing CPU utilization for receives.
-
-  NOTE: You need to have inet_lro enabled via either the CONFIG_INET_LRO or
-  CONFIG_INET_LRO_MODULE kernel config option. Additionally, if
-  CONFIG_INET_LRO_MODULE is used, the inet_lro module needs to be loaded
-  before the igb driver.
-
-  You can verify that the driver is using LRO by looking at these counters in
-  Ethtool:
-
-  lro_aggregated - count of total packets that were combined
-  lro_flushed - counts the number of packets flushed out of LRO
-  lro_no_desc - counts the number of times an LRO descriptor was not available
-  for the LRO packet
-
-  NOTE: IPv6 and UDP are not supported by LRO.
-
 Support
 =======
 
diff --git a/Documentation/networking/igbvf.txt b/Documentation/networking/igbvf.txt
index 056028138d9..cbfe4ee6553 100644
--- a/Documentation/networking/igbvf.txt
+++ b/Documentation/networking/igbvf.txt
@@ -58,9 +58,11 @@ Additional Configurations
   Ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.
+  diagnostics, as well as displaying statistical information.  The ethtool
+  version 3.0 or later is required for this functionality, although we
+  strongly recommend downloading the latest version at:
 
-  http://sourceforge.net/projects/gkernel.
+  http://ftp.kernel.org/pub/software/network/ethtool/
 
 Support
 =======
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index c7165f4cb79..d99940dcfc4 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -11,7 +11,9 @@ ip_forward - BOOLEAN
 	for routers)
 
 ip_default_ttl - INTEGER
-	default 64
+	Default value of TTL field (Time To Live) for outgoing (but not
+	forwarded) IP packets. Should be between 1 and 255 inclusive.
+	Default: 64 (as recommended by RFC1700)
 
 ip_no_pmtu_disc - BOOLEAN
 	Disable Path MTU Discovery.
@@ -20,6 +22,15 @@ ip_no_pmtu_disc - BOOLEAN
 min_pmtu - INTEGER
 	default 562 - minimum discovered Path MTU
 
+route/max_size - INTEGER
+	Maximum number of routes allowed in the kernel.  Increase
+	this when using large numbers of interfaces and/or routes.
+
+neigh/default/gc_thresh3 - INTEGER
+	Maximum number of neighbor entries allowed.  Increase this
+	when using large numbers of interfaces and when communicating
+	with large numbers of directly-connected peers.
+
 mtu_expires - INTEGER
 	Time, in seconds, that cached PMTU information is kept.
 
@@ -135,6 +146,7 @@ tcp_adv_win_scale - INTEGER
 	Count buffering overhead as bytes/2^tcp_adv_win_scale
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
+	Possible values are [-31, 31], inclusive.
 	Default: 2
 
 tcp_allowed_congestion_control - STRING
@@ -698,10 +710,28 @@ igmp_max_memberships - INTEGER
 	Change the maximum number of multicast groups we can subscribe to.
 	Default: 20
 
-conf/interface/*  changes special settings per interface (where "interface" is
-		  the name of your network interface)
-conf/all/*	  is special, changes the settings for all interfaces
+	Theoretical maximum value is bounded by having to send a membership
+	report in a single datagram (i.e. the report can't span multiple
+	datagrams, or risk confusing the switch and leaving groups you don't
+	intend to).
+
+	The number of supported groups 'M' is bounded by the number of group
+	report entries you can fit into a single datagram of 65535 bytes.
+
+	M = 65536-sizeof (ip header)/(sizeof(Group record))
+
+	Group records are variable length, with a minimum of 12 bytes.
+	So net.ipv4.igmp_max_memberships should not be set higher than:
+
+	(65536-24) / 12 = 5459
+
+	The value 5459 assumes no IP header options, so in practice
+	this number may be lower.
+
+	conf/interface/*  changes special settings per interface (where
+	"interface" is the name of your network interface)
 
+	conf/all/*	  is special, changes the settings for all interfaces
 
 log_martians - BOOLEAN
 	Log packets with impossible addresses to kernel log.
diff --git a/Documentation/networking/ixgb.txt b/Documentation/networking/ixgb.txt
index a0d0ffb5e58..e196f16df31 100644
--- a/Documentation/networking/ixgb.txt
+++ b/Documentation/networking/ixgb.txt
@@ -309,15 +309,15 @@ Additional Configurations
   Ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.  Ethtool
+  diagnostics, as well as displaying statistical information.  The ethtool
   version 1.6 or later is required for this functionality.
 
   The latest release of ethtool can be found from
-  http://sourceforge.net/projects/gkernel
+  http://ftp.kernel.org/pub/software/network/ethtool/
 
-  NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support
-        for a more complete ethtool feature set can be enabled by upgrading
-        to the latest version.
+  NOTE: The ethtool version 1.6 only supports a limited set of ethtool options.
+        Support for a more complete ethtool feature set can be enabled by
+        upgrading to the latest version.
 
 
   NAPI
diff --git a/Documentation/networking/ixgbe.txt b/Documentation/networking/ixgbe.txt
index eeb68685c78..af77ed3c417 100644
--- a/Documentation/networking/ixgbe.txt
+++ b/Documentation/networking/ixgbe.txt
@@ -1,107 +1,126 @@
 Linux Base Driver for 10 Gigabit PCI Express Intel(R) Network Connection
 ========================================================================
 
-March 10, 2009
-
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2010 Intel Corporation.
 
 Contents
 ========
 
-- In This Release
 - Identifying Your Adapter
-- Building and Installation
 - Additional Configurations
+- Performance Tuning
+- Known Issues
 - Support
 
+Identifying Your Adapter
+========================
 
+The driver in this release is compatible with 82598 and 82599-based Intel
+Network Connections.
 
-In This Release
-===============
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
 
-This file describes the ixgbe Linux Base Driver for the 10 Gigabit PCI
-Express Intel(R) Network Connection.  This driver includes support for
-Itanium(R)2-based systems.
+    http://support.intel.com/support/network/sb/CS-012904.htm
 
-For questions related to hardware requirements, refer to the documentation
-supplied with your 10 Gigabit adapter.  All hardware requirements listed apply
-to use with Linux.
+SFP+ Devices with Pluggable Optics
+----------------------------------
 
-The following features are available in this kernel:
- - Native VLANs
- - Channel Bonding (teaming)
- - SNMP
- - Generic Receive Offload
- - Data Center Bridging
+82599-BASED ADAPTERS
 
-Channel Bonding documentation can be found in the Linux kernel source:
-/Documentation/networking/bonding.txt
+NOTES: If your 82599-based Intel(R) Network Adapter came with Intel optics, or
+is an Intel(R) Ethernet Server Adapter X520-2, then it only supports Intel
+optics and/or the direct attach cables listed below.
 
-Ethtool, lspci, and ifconfig can be used to display device and driver
-specific information.
+When 82599-based SFP+ devices are connected back to back, they should be set to
+the same Speed setting via ethtool. Results may vary if you mix speed settings.
+82598-based adapters support all passive direct attach cables that comply
+with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach
+cables are not supported.
 
+Supplier    Type                                             Part Numbers
 
-Identifying Your Adapter
-========================
+SR Modules
+Intel       DUAL RATE 1G/10G SFP+ SR (bailed)                FTLX8571D3BCV-IT
+Intel       DUAL RATE 1G/10G SFP+ SR (bailed)                AFBR-703SDDZ-IN1
+Intel       DUAL RATE 1G/10G SFP+ SR (bailed)                AFBR-703SDZ-IN2
+LR Modules
+Intel       DUAL RATE 1G/10G SFP+ LR (bailed)                FTLX1471D3BCV-IT
+Intel       DUAL RATE 1G/10G SFP+ LR (bailed)                AFCT-701SDDZ-IN1
+Intel       DUAL RATE 1G/10G SFP+ LR (bailed)                AFCT-701SDZ-IN2
 
-This driver supports devices based on the 82598 controller and the 82599
-controller.
+The following is a list of 3rd party SFP+ modules and direct attach cables that
+have received some testing. Not all modules are applicable to all devices.
 
-For specific information on identifying which adapter you have, please visit:
+Supplier   Type                                              Part Numbers
 
-    http://support.intel.com/support/network/sb/CS-008441.htm
+Finisar    SFP+ SR bailed, 10g single rate                   FTLX8571D3BCL
+Avago      SFP+ SR bailed, 10g single rate                   AFBR-700SDZ
+Finisar    SFP+ LR bailed, 10g single rate                   FTLX1471D3BCL
 
+Finisar    DUAL RATE 1G/10G SFP+ SR (No Bail)                FTLX8571D3QCV-IT
+Avago      DUAL RATE 1G/10G SFP+ SR (No Bail)                AFBR-703SDZ-IN1
+Finisar    DUAL RATE 1G/10G SFP+ LR (No Bail)                FTLX1471D3QCV-IT
+Avago      DUAL RATE 1G/10G SFP+ LR (No Bail)                AFCT-701SDZ-IN1
+Finistar   1000BASE-T SFP                                    FCLF8522P2BTL
+Avago      1000BASE-T SFP                                    ABCU-5710RZ
 
-Building and Installation
-=========================
+82599-based adapters support all passive and active limiting direct attach
+cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications.
 
-select m for "Intel(R) 10GbE PCI Express adapters support" located at:
-      Location:
-        -> Device Drivers
-          -> Network device support (NETDEVICES [=y])
-            -> Ethernet (10000 Mbit) (NETDEV_10000 [=y])
+Laser turns off for SFP+ when ifconfig down
+-------------------------------------------
+"ifconfig down" turns off the laser for 82599-based SFP+ fiber adapters.
+"ifconfig up" turns on the later.
 
-1. make modules & make modules_install
 
-2. Load the module:
+82598-BASED ADAPTERS
 
-# modprobe ixgbe
+NOTES for 82598-Based Adapters:
+- Intel(R) Network Adapters that support removable optical modules only support
+  their original module type (i.e., the Intel(R) 10 Gigabit SR Dual Port
+  Express Module only supports SR optical modules). If you plug in a different
+  type of module, the driver will not load.
+- Hot Swapping/hot plugging optical modules is not supported.
+- Only single speed, 10 gigabit modules are supported.
+- LAN on Motherboard (LOMs) may support DA, SR, or LR modules. Other module
+  types are not supported. Please see your system documentation for details.
 
-   The insmod command can be used if the full
-   path to the driver module is specified.  For example:
+The following is a list of 3rd party SFP+ modules and direct attach cables that
+have received some testing. Not all modules are applicable to all devices.
 
-     insmod /lib/modules/<KERNEL VERSION>/kernel/drivers/net/ixgbe/ixgbe.ko
+Supplier   Type                                              Part Numbers
 
-   With 2.6 based kernels also make sure that older ixgbe drivers are
-   removed from the kernel, before loading the new module:
+Finisar    SFP+ SR bailed, 10g single rate                   FTLX8571D3BCL
+Avago      SFP+ SR bailed, 10g single rate                   AFBR-700SDZ
+Finisar    SFP+ LR bailed, 10g single rate                   FTLX1471D3BCL
 
-     rmmod ixgbe; modprobe ixgbe
+82598-based adapters support all passive direct attach cables that comply
+with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach
+cables are not supported.
 
-3. Assign an IP address to the interface by entering the following, where
-   x is the interface number:
 
-     ifconfig ethx <IP_address>
+Flow Control
+------------
+Ethernet Flow Control (IEEE 802.3x) can be configured with ethtool to enable
+receiving and transmitting pause frames for ixgbe. When TX is enabled, PAUSE
+frames are generated when the receive packet buffer crosses a predefined
+threshold.  When rx is enabled, the transmit unit will halt for the time delay
+specified when a PAUSE frame is received.
 
-4. Verify that the interface works. Enter the following, where <IP_address>
-   is the IP address for another machine on the same subnet as the interface
-   that is being tested:
+Flow Control is enabled by default. If you want to disable a flow control
+capable link partner, use ethtool:
 
-     ping  <IP_address>
+     ethtool -A eth? autoneg off RX off TX off
 
+NOTE: For 82598 backplane cards entering 1 gig mode, flow control default
+behavior is changed to off.  Flow control in 1 gig mode on these devices can
+lead to Tx hangs.
 
 Additional Configurations
 =========================
 
-  Viewing Link Messages
-  ---------------------
-  Link messages will not be displayed to the console if the distribution is
-  restricting system messages. In order to see network driver link messages on
-  your console, set dmesg to eight by entering the following:
-
-       dmesg -n 8
-
-  NOTE: This setting is not saved across reboots.
-
-
   Jumbo Frames
   ------------
   The driver supports Jumbo Frames for all adapters. Jumbo Frames support is
@@ -123,13 +142,8 @@ Additional Configurations
   other protocols besides TCP.  It's also safe to use with configurations that
   are problematic for LRO, namely bridging and iSCSI.
 
-  GRO is enabled by default in the driver.  Future versions of ethtool will
-  support disabling and re-enabling GRO on the fly.
-
-
   Data Center Bridging, aka DCB
   -----------------------------
-
   DCB is a configuration Quality of Service implementation in hardware.
   It uses the VLAN priority tag (802.1p) to filter traffic.  That means
   that there are 8 different priorities that traffic can be filtered into.
@@ -163,24 +177,71 @@ Additional Configurations
 
         http://e1000.sf.net
 
-
   Ethtool
   -------
   The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.  Ethtool
-  version 3.0 or later is required for this functionality.
+  diagnostics, as well as displaying statistical information. The latest
+  ethtool version is required for this functionality.
 
   The latest release of ethtool can be found from
-  http://sourceforge.net/projects/gkernel.
+  http://ftp.kernel.org/pub/software/network/ethtool/
 
-
-  NAPI
+  FCoE
   ----
+  This release of the ixgbe driver contains new code to enable users to use
+  Fiber Channel over Ethernet (FCoE) and Data Center Bridging (DCB)
+  functionality that is supported by the 82598-based hardware.  This code has
+  no default effect on the regular driver operation, and configuring DCB and
+  FCoE is outside the scope of this driver README. Refer to
+  http://www.open-fcoe.org/ for FCoE project information and contact
+  e1000-eedc@lists.sourceforge.net for DCB information.
+
+  MAC and VLAN anti-spoofing feature
+  ----------------------------------
+  When a malicious driver attempts to send a spoofed packet, it is dropped by
+  the hardware and not transmitted.  An interrupt is sent to the PF driver
+  notifying it of the spoof attempt.
+
+  When a spoofed packet is detected the PF driver will send the following
+  message to the system log (displayed by  the "dmesg" command):
+
+  Spoof event(s) detected on VF (n)
+
+  Where n=the VF that attempted to do the spoofing.
+
+
+Performance Tuning
+==================
+
+An excellent article on performance tuning can be found at:
+
+http://www.redhat.com/promo/summit/2008/downloads/pdf/Thursday/Mark_Wagner.pdf
+
+
+Known Issues
+============
+
+  Enabling SR-IOV in a 32-bit Microsoft* Windows* Server 2008 Guest OS using
+  Intel (R) 82576-based GbE or Intel (R) 82599-based 10GbE controller under KVM
+  -----------------------------------------------------------------------------
+  KVM Hypervisor/VMM supports direct assignment of a PCIe device to a VM.  This
+  includes traditional PCIe devices, as well as SR-IOV-capable devices using
+  Intel 82576-based and 82599-based controllers.
+
+  While direct assignment of a PCIe device or an SR-IOV Virtual Function (VF)
+  to a Linux-based VM running 2.6.32 or later kernel works fine, there is a
+  known issue with Microsoft Windows Server 2008 VM that results in a "yellow
+  bang" error. This problem is within the KVM VMM itself, not the Intel driver,
+  or the SR-IOV logic of the VMM, but rather that KVM emulates an older CPU
+  model for the guests, and this older CPU model does not support MSI-X
+  interrupts, which is a requirement for Intel SR-IOV.
 
-  NAPI (Rx polling mode) is supported in the ixgbe driver.  NAPI is enabled
-  by default in the driver.
+  If you wish to use the Intel 82576 or 82599-based controllers in SR-IOV mode
+  with KVM and a Microsoft Windows Server 2008 guest try the following
+  workaround. The workaround is to tell KVM to emulate a different model of CPU
+  when using qemu to create the KVM guest:
 
-  See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
+       "-cpu qemu64,model=13"
 
 
 Support
diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
index 21dd5d15b6b..5a91a41fa94 100644
--- a/Documentation/networking/ixgbevf.txt
+++ b/Documentation/networking/ixgbevf.txt
@@ -35,10 +35,6 @@ Driver ID Guide at:
 Known Issues/Troubleshooting
 ============================
 
-  Unloading Physical Function (PF) Driver Causes System Reboots When VM is
-  Running and VF is Loaded on the VM
-  ------------------------------------------------------------------------
-  Do not unload the PF driver (ixgbe) while VFs are assigned to guests.
 
 Support
 =======
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index 7ee770b5ef5..80a7a345490 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -7,7 +7,7 @@ This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
 (Synopsys IP blocks); it has been fully tested on STLinux platforms.
 
 Currently this network device driver is for all STM embedded MAC/GMAC
-(7xxx SoCs).
+(7xxx SoCs). Other platforms start using it i.e. ARM SPEAr.
 
 DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
 Universal version 4.0 have been used for developing the first code
@@ -95,9 +95,14 @@ Several information came from the platform; please refer to the
 driver's Header file in include/linux directory.
 
 struct plat_stmmacenet_data {
-        int bus_id;
-        int pbl;
-        int has_gmac;
+	int bus_id;
+	int pbl;
+	int clk_csr;
+	int has_gmac;
+	int enh_desc;
+	int tx_coe;
+	int bugged_jumbo;
+	int pmt;
         void (*fix_mac_speed)(void *priv, unsigned int speed);
         void (*bus_setup)(unsigned long ioaddr);
 #ifdef CONFIG_STM_DRIVERS
@@ -114,6 +119,12 @@ Where:
   registers (on STM platforms);
 - has_gmac: GMAC core is on board (get it at run-time in the next step);
 - bus_id: bus identifier.
+- tx_coe: core is able to perform the tx csum in HW.
+- enh_desc: if sets the MAC will use the enhanced descriptor structure.
+- clk_csr: CSR Clock range selection.
+- bugged_jumbo: some HWs are not able to perform the csum in HW for
+  over-sized frames due to limited buffer sizes. Setting this
+  flag the csum will be done in SW on JUMBO frames.
 
 struct plat_stmmacphy_data {
         int bus_id;
@@ -131,13 +142,28 @@ Where:
 - interface: physical MII interface mode;
 - phy_reset: hook to reset HW function.
 
+SOURCES:
+- Kconfig
+- Makefile
+- stmmac_main.c: main network device driver;
+- stmmac_mdio.c: mdio functions;
+- stmmac_ethtool.c: ethtool support;
+- stmmac_timer.[ch]: timer code used for mitigating the driver dma interrupts
+  Only tested on ST40 platforms based.
+- stmmac.h: private driver structure;
+- common.h: common definitions and VFTs;
+- descs.h: descriptor structure definitions;
+- dwmac1000_core.c: GMAC core functions;
+- dwmac1000_dma.c:  dma functions for the GMAC chip;
+- dwmac1000.h: specific header file for the GMAC;
+- dwmac100_core: MAC 100 core and dma code;
+- dwmac100_dma.c: dma funtions for the MAC chip;
+- dwmac1000.h: specific header file for the MAC;
+- dwmac_lib.c: generic DMA functions shared among chips
+- enh_desc.c: functions for handling enhanced descriptors
+- norm_desc.c: functions for handling normal descriptors
+
 TODO:
-- Continue to make the driver more generic and suitable for other Synopsys
-  Ethernet controllers used on other architectures (i.e. ARM).
-- 10G controllers are not supported.
-- MAC uses Normal descriptors and GMAC uses enhanced ones.
-  This is a limit that should be reviewed. MAC could want to
-  use the enhanced structure.
-- Checksumming: Rx/Tx csum is done in HW in case of GMAC only.
+- XGMAC controller is not supported.
 - Review the timer optimisation code to use an embedded device that seems to be
   available in new chip generations.
diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
index 44d87ad3cea..cd445582d1f 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.txt
@@ -37,6 +37,9 @@ Typical usage of the OPP library is as follows:
 SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
 		-> queries to search/retrieve information	->
 
+Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP
+to make the OPP layer available.
+
 OPP layer expects each domain to be represented by a unique device pointer. SoC
 framework registers a set of initial OPPs per device with the OPP layer. This
 list is expected to be an optimally small number typically around 5 per device.
diff --git a/Documentation/power/runtime_pm.txt b/Documentation/power/runtime_pm.txt
index 489e9bacd16..41cc7b30d7d 100644
--- a/Documentation/power/runtime_pm.txt
+++ b/Documentation/power/runtime_pm.txt
@@ -379,8 +379,8 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
       zero)
 
   bool pm_runtime_suspended(struct device *dev);
-    - return true if the device's runtime PM status is 'suspended', or false
-      otherwise
+    - return true if the device's runtime PM status is 'suspended' and its
+      'power.disable_depth' field is equal to zero, or false otherwise
 
   void pm_runtime_allow(struct device *dev);
     - set the power.runtime_auto flag for the device and decrease its usage
diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt
index 221f38be98f..19f8278c385 100644
--- a/Documentation/rbtree.txt
+++ b/Documentation/rbtree.txt
@@ -21,8 +21,8 @@ three rotations, respectively, to balance the tree), with slightly slower
 To quote Linux Weekly News:
 
     There are a number of red-black trees in use in the kernel.
-    The anticipatory, deadline, and CFQ I/O schedulers all employ
-    rbtrees to track requests; the packet CD/DVD driver does the same.
+    The deadline and CFQ I/O schedulers employ rbtrees to
+    track requests; the packet CD/DVD driver does the same.
     The high-resolution timer code uses an rbtree to organize outstanding
     timer requests.  The ext3 filesystem tracks directory entries in a
     red-black tree.  Virtual memory areas (VMAs) are tracked with red-black
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 00301ed9c37..b64d10d221e 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,25 @@
+Release Date    : Tues.  Dec 14, 2010 17:00:00 PST 2010 -
+			(emaild-id:megaraidlinux@lsi.com)
+			Adam Radford
+Current Version : 00.00.05.29-rc1
+Old Version     : 00.00.04.31-rc1
+    1. Rename megaraid_sas.c to megaraid_sas_base.c.
+    2. Update GPL headers.
+    3. Add MSI-X support and 'msix_disable' module parameter.
+    4. Use lowest memory bar (for SR-IOV VF support).
+    5. Add struct megasas_instance_temlate changes, and change all code to use
+       new instance entries:
+
+       irqreturn_t (*service_isr )(int irq, void *devp);
+       void (*tasklet)(unsigned long);
+       u32 (*init_adapter)(struct megasas_instance *);
+       u32 (*build_and_issue_cmd) (struct megasas_instance *,
+       struct scsi_cmnd *);
+       void (*issue_dcmd) (struct megasas_instance *instance,
+                              struct megasas_cmd *cmd);
+
+   6. Add code to support MegaRAID 9265/9285 controllers device id (0x5b).
+-------------------------------------------------------------------------------
 1 Release Date    : Thur.  May 03, 2010 09:12:45 PST 2009 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Bo Yang
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 570ef2b3d79..df322c10346 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -1044,9 +1044,9 @@ Details:
 
 
 /**
- *      queuecommand - queue scsi command, invoke 'done' on completion
+ *      queuecommand - queue scsi command, invoke scp->scsi_done on completion
+ *      @shost: pointer to the scsi host object
  *      @scp: pointer to scsi command object
- *      @done: function pointer to be invoked on completion
  *
  *      Returns 0 on success.
  *
@@ -1074,42 +1074,45 @@ Details:
  *
  *      Other types of errors that are detected immediately may be
  *      flagged by setting scp->result to an appropriate value,
- *      invoking the 'done' callback, and then returning 0 from this
- *      function. If the command is not performed immediately (and the
- *      LLD is starting (or will start) the given command) then this
- *      function should place 0 in scp->result and return 0.
+ *      invoking the scp->scsi_done callback, and then returning 0
+ *      from this function. If the command is not performed
+ *      immediately (and the LLD is starting (or will start) the given
+ *      command) then this function should place 0 in scp->result and
+ *      return 0.
  *
  *      Command ownership.  If the driver returns zero, it owns the
- *      command and must take responsibility for ensuring the 'done'
- *      callback is executed.  Note: the driver may call done before
- *      returning zero, but after it has called done, it may not
- *      return any value other than zero.  If the driver makes a
- *      non-zero return, it must not execute the command's done
- *      callback at any time.
- *
- *      Locks: struct Scsi_Host::host_lock held on entry (with "irqsave")
- *             and is expected to be held on return.
+ *      command and must take responsibility for ensuring the
+ *      scp->scsi_done callback is executed.  Note: the driver may
+ *      call scp->scsi_done before returning zero, but after it has
+ *      called scp->scsi_done, it may not return any value other than
+ *      zero.  If the driver makes a non-zero return, it must not
+ *      execute the command's scsi_done callback at any time.
+ *
+ *      Locks: up to and including 2.6.36, struct Scsi_Host::host_lock
+ *             held on entry (with "irqsave") and is expected to be
+ *             held on return. From 2.6.37 onwards, queuecommand is
+ *             called without any locks held.
  *
  *      Calling context: in interrupt (soft irq) or process context
  *
- *      Notes: This function should be relatively fast. Normally it will
- *      not wait for IO to complete. Hence the 'done' callback is invoked 
- *      (often directly from an interrupt service routine) some time after
- *      this function has returned. In some cases (e.g. pseudo adapter 
- *      drivers that manufacture the response to a SCSI INQUIRY)
- *      the 'done' callback may be invoked before this function returns.
- *      If the 'done' callback is not invoked within a certain period
- *      the SCSI mid level will commence error processing.
- *      If a status of CHECK CONDITION is placed in "result" when the
- *      'done' callback is invoked, then the LLD driver should 
- *      perform autosense and fill in the struct scsi_cmnd::sense_buffer
+ *      Notes: This function should be relatively fast. Normally it
+ *      will not wait for IO to complete. Hence the scp->scsi_done
+ *      callback is invoked (often directly from an interrupt service
+ *      routine) some time after this function has returned. In some
+ *      cases (e.g. pseudo adapter drivers that manufacture the
+ *      response to a SCSI INQUIRY) the scp->scsi_done callback may be
+ *      invoked before this function returns.  If the scp->scsi_done
+ *      callback is not invoked within a certain period the SCSI mid
+ *      level will commence error processing.  If a status of CHECK
+ *      CONDITION is placed in "result" when the scp->scsi_done
+ *      callback is invoked, then the LLD driver should perform
+ *      autosense and fill in the struct scsi_cmnd::sense_buffer
  *      array. The scsi_cmnd::sense_buffer array is zeroed prior to
  *      the mid level queuing a command to an LLD.
  *
  *      Defined in: LLD
  **/
-    int queuecommand(struct scsi_cmnd * scp, 
-                     void (*done)(struct scsi_cmnd *))
+    int queuecommand(struct Scsi_Host *shost, struct scsi_cmnd * scp)
 
 
 /**
diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX
index 07dcdb0d2a3..e09468ad3cb 100644
--- a/Documentation/serial/00-INDEX
+++ b/Documentation/serial/00-INDEX
@@ -14,6 +14,8 @@ riscom8.txt
 	- notes on using the RISCom/8 multi-port serial driver.
 rocket.txt
 	- info on the Comtrol RocketPort multiport serial driver.
+serial-rs485.txt
+	- info about RS485 structures and support in the kernel.
 specialix.txt
 	- info on hardware/driver for specialix IO8+ multiport serial card.
 stallion.txt
diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt
new file mode 100644
index 00000000000..a4932387bbf
--- /dev/null
+++ b/Documentation/serial/serial-rs485.txt
@@ -0,0 +1,120 @@
+                        RS485 SERIAL COMMUNICATIONS
+
+1. INTRODUCTION
+
+   EIA-485, also known as TIA/EIA-485 or RS-485, is a standard defining the
+   electrical characteristics of drivers and receivers for use in balanced
+   digital multipoint systems.
+   This standard is widely used for communications in industrial automation
+   because it can be used effectively over long distances and in electrically
+   noisy environments.
+
+2. HARDWARE-RELATED CONSIDERATIONS
+
+   Some CPUs/UARTs (e.g., Atmel AT91 or 16C950 UART) contain a built-in
+   half-duplex mode capable of automatically controlling line direction by
+   toggling RTS or DTR signals. That can be used to control external
+   half-duplex hardware like an RS485 transceiver or any RS232-connected
+   half-duplex devices like some modems.
+
+   For these microcontrollers, the Linux driver should be made capable of
+   working in both modes, and proper ioctls (see later) should be made
+   available at user-level to allow switching from one mode to the other, and
+   vice versa.
+
+3. DATA STRUCTURES ALREADY AVAILABLE IN THE KERNEL
+
+   The Linux kernel provides the serial_rs485 structure (see [1]) to handle
+   RS485 communications. This data structure is used to set and configure RS485
+   parameters in the platform data and in ioctls.
+
+   Any driver for devices capable of working both as RS232 and RS485 should
+   provide at least the following ioctls:
+
+    - TIOCSRS485 (typically associated with number 0x542F). This ioctl is used
+      to enable/disable RS485 mode from user-space
+
+    - TIOCGRS485 (typically associated with number 0x542E). This ioctl is used
+      to get RS485 mode from kernel-space (i.e., driver) to user-space.
+
+   In other words, the serial driver should contain a code similar to the next
+   one:
+
+	static struct uart_ops atmel_pops = {
+		/* ... */
+		.ioctl		= handle_ioctl,
+	};
+
+	static int handle_ioctl(struct uart_port *port,
+		unsigned int cmd,
+		unsigned long arg)
+	{
+		struct serial_rs485 rs485conf;
+
+		switch (cmd) {
+		case TIOCSRS485:
+			if (copy_from_user(&rs485conf,
+				(struct serial_rs485 *) arg,
+				sizeof(rs485conf)))
+					return -EFAULT;
+
+			/* ... */
+			break;
+
+		case TIOCGRS485:
+			if (copy_to_user((struct serial_rs485 *) arg,
+				...,
+				sizeof(rs485conf)))
+					return -EFAULT;
+			/* ... */
+			break;
+
+		/* ... */
+		}
+	}
+
+
+4. USAGE FROM USER-LEVEL
+
+   From user-level, RS485 configuration can be get/set using the previous
+   ioctls. For instance, to set RS485 you can use the following code:
+
+	#include <linux/serial.h>
+
+	/* Driver-specific ioctls: */
+	#define TIOCGRS485      0x542E
+	#define TIOCSRS485      0x542F
+
+	/* Open your specific device (e.g., /dev/mydevice): */
+	int fd = open ("/dev/mydevice", O_RDWR);
+	if (fd < 0) {
+		/* Error handling. See errno. */
+	}
+
+	struct serial_rs485 rs485conf;
+
+	/* Set RS485 mode: */
+	rs485conf.flags |= SER_RS485_ENABLED;
+
+	/* Set rts delay before send, if needed: */
+	rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
+	rs485conf.delay_rts_before_send = ...;
+
+	/* Set rts delay after send, if needed: */
+	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+	rs485conf.delay_rts_after_send = ...;
+
+	if (ioctl (fd, TIOCSRS485, &rs485conf) < 0) {
+		/* Error handling. See errno. */
+	}
+
+	/* Use read() and write() syscalls here... */
+
+	/* Close the device when finished: */
+	if (close (fd) < 0) {
+		/* Error handling. See errno. */
+	}
+
+5. REFERENCES
+
+ [1]	include/linux/serial.h
diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt
deleted file mode 100644
index 114b595cfa9..00000000000
--- a/Documentation/sh/clk.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-Clock framework on SuperH architecture
-
-The framework on SH extends existing API by the function clk_set_rate_ex,
-which prototype is as follows:
-
-    clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id)
-
-The algo_id parameter is used to specify algorithm used to recalculate clocks,
-adjanced to clock, specified as first argument. It is assumed that algo_id==0
-means no changes to adjanced clock
-
-Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
-if it is present in ops structure. The method should set the clock rate and adjust
-all needed clocks according to the passed algo_id.
-Exact values for algo_id are machine-dependent. For the sh7722, the following
-values are defined:
-
-	NO_CHANGE	= 0,
-	IUS_N1_N1,	/* I:U = N:1, U:Sh = N:1 */
-	IUS_322,	/* I:U:Sh = 3:2:2	 */
-	IUS_522,	/* I:U:Sh = 5:2:2 	 */
-	IUS_N11,	/* I:U:Sh = N:1:1	 */
-	SB_N1,		/* Sh:B = N:1		 */
-	SB3_N1,		/* Sh:B3 = N:1		 */
-	SB3_32,		/* Sh:B3 = 3:2		 */
-	SB3_43,		/* Sh:B3 = 4:3		 */
-	SB3_54,		/* Sh:B3 = 5:4		 */
-	BP_N1,		/* B:P	 = N:1		 */
-	IP_N1		/* I:P	 = N:1		 */
-
-Each of these constants means relation between clocks that can be set via the FRQCR
-register
diff --git a/Documentation/spi/pxa2xx b/Documentation/spi/pxa2xx
index 6bb916d57c9..68a4fe3818a 100644
--- a/Documentation/spi/pxa2xx
+++ b/Documentation/spi/pxa2xx
@@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers
 -----------------------------------
 Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
 "platform device".  The master configuration is passed to the driver via a table
-found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h:
+found in include/linux/spi/pxa2xx_spi.h:
 
 struct pxa2xx_spi_master {
 	enum pxa_ssp_type ssp_type;
@@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See
 
 Each slave device attached to the PXA must provide slave specific configuration
 information via the structure "pxa2xx_spi_chip" found in
-"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
+"include/linux/spi/pxa2xx_spi.h".  The pxa2xx_spi master controller driver
 will uses the configuration whenever the driver communicates with the slave
 device. All fields are optional.
 
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 3894eaa2348..209e1584c3d 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -28,6 +28,7 @@ show up in /proc/sys/kernel:
 - core_uses_pid
 - ctrl-alt-del
 - dentry-state
+- dmesg_restrict
 - domainname
 - hostname
 - hotplug
@@ -213,6 +214,19 @@ to decide what to do with it.
 
 ==============================================================
 
+dmesg_restrict:
+
+This toggle indicates whether unprivileged users are prevented from using
+dmesg(8) to view messages from the kernel's log buffer.  When
+dmesg_restrict is set to (0) there are no restrictions.  When
+dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
+dmesg(8).
+
+The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
+value of dmesg_restrict.
+
+==============================================================
+
 domainname & hostname:
 
 These files can be used to set the NIS/YP domainname and the
diff --git a/Documentation/trace/events-power.txt b/Documentation/trace/events-power.txt
new file mode 100644
index 00000000000..96d87b67fe3
--- /dev/null
+++ b/Documentation/trace/events-power.txt
@@ -0,0 +1,90 @@
+
+			Subsystem Trace Points: power
+
+The power tracing system captures events related to power transitions
+within the kernel. Broadly speaking there are three major subheadings:
+
+  o Power state switch which reports events related to suspend (S-states),
+     cpuidle (C-states) and cpufreq (P-states)
+  o System clock related changes
+  o Power domains related changes and transitions
+
+This document describes what each of the tracepoints is and why they
+might be useful.
+
+Cf. include/trace/events/power.h for the events definitions.
+
+1. Power state switch events
+============================
+
+1.1 New trace API
+-----------------
+
+A 'cpu' event class gathers the CPU-related events: cpuidle and
+cpufreq.
+
+cpu_idle		"state=%lu cpu_id=%lu"
+cpu_frequency		"state=%lu cpu_id=%lu"
+
+A suspend event is used to indicate the system going in and out of the
+suspend mode:
+
+machine_suspend		"state=%lu"
+
+
+Note: the value of '-1' or '4294967295' for state means an exit from the current state,
+i.e. trace_cpu_idle(4, smp_processor_id()) means that the system
+enters the idle state 4, while trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id())
+means that the system exits the previous idle state.
+
+The event which has 'state=4294967295' in the trace is very important to the user
+space tools which are using it to detect the end of the current state, and so to
+correctly draw the states diagrams and to calculate accurate statistics etc.
+
+1.2 DEPRECATED trace API
+------------------------
+
+A new Kconfig option CONFIG_EVENT_POWER_TRACING_DEPRECATED with the default value of
+'y' has been created. This allows the legacy trace power API to be used conjointly
+with the new trace API.
+The Kconfig option, the old trace API (in include/trace/events/power.h) and the
+old trace points will disappear in a future release (namely 2.6.41).
+
+power_start		"type=%lu state=%lu cpu_id=%lu"
+power_frequency		"type=%lu state=%lu cpu_id=%lu"
+power_end		"cpu_id=%lu"
+
+The 'type' parameter takes one of those macros:
+ . POWER_NONE	= 0,
+ . POWER_CSTATE	= 1,	/* C-State */
+ . POWER_PSTATE	= 2,	/* Fequency change or DVFS */
+
+The 'state' parameter is set depending on the type:
+ . Target C-state for type=POWER_CSTATE,
+ . Target frequency for type=POWER_PSTATE,
+
+power_end is used to indicate the exit of a state, corresponding to the latest
+power_start event.
+
+2. Clocks events
+================
+The clock events are used for clock enable/disable and for
+clock rate change.
+
+clock_enable		"%s state=%lu cpu_id=%lu"
+clock_disable		"%s state=%lu cpu_id=%lu"
+clock_set_rate		"%s state=%lu cpu_id=%lu"
+
+The first parameter gives the clock name (e.g. "gpio1_iclk").
+The second parameter is '1' for enable, '0' for disable, the target
+clock rate for set_rate.
+
+3. Power domains events
+=======================
+The power domain events are used for power domains transitions
+
+power_domain_target	"%s state=%lu cpu_id=%lu"
+
+The first parameter gives the power domain name (e.g. "mpu_pwrdm").
+The second parameter is the power domain target state.
+
diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
index b3e73ddb156..12cecc83cd9 100644
--- a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
+++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl
@@ -373,9 +373,18 @@ EVENT_PROCESS:
 				print "         $regex_lru_isolate/o\n";
 				next;
 			}
+			my $isolate_mode = $1;
 			my $nr_scanned = $4;
 			my $nr_contig_dirty = $7;
-			$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
+
+			# To closer match vmstat scanning statistics, only count isolate_both
+			# and isolate_inactive as scanning. isolate_active is rotation
+			# isolate_inactive == 0
+			# isolate_active   == 1
+			# isolate_both     == 2
+			if ($isolate_mode != 1) {
+				$perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned;
+			}
 			$perprocesspid{$process_pid}->{HIGH_NR_CONTIG_DIRTY} += $nr_contig_dirty;
 		} elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") {
 			$details = $5;
diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt
index b29d8e56cf2..c9ffa9ced7e 100644
--- a/Documentation/usb/power-management.txt
+++ b/Documentation/usb/power-management.txt
@@ -2,7 +2,7 @@
 
 		 Alan Stern <stern@rowland.harvard.edu>
 
-			    December 11, 2009
+			    October 28, 2010
 
 
 
@@ -107,9 +107,14 @@ allowed to issue dynamic suspends.
 The user interface for controlling dynamic PM is located in the power/
 subdirectory of each USB device's sysfs directory, that is, in
 /sys/bus/usb/devices/.../power/ where "..." is the device's ID.  The
-relevant attribute files are: wakeup, control, and autosuspend.
-(There may also be a file named "level"; this file was deprecated
-as of the 2.6.35 kernel and replaced by the "control" file.)
+relevant attribute files are: wakeup, control, and
+autosuspend_delay_ms.  (There may also be a file named "level"; this
+file was deprecated as of the 2.6.35 kernel and replaced by the
+"control" file.  In 2.6.38 the "autosuspend" file will be deprecated
+and replaced by the "autosuspend_delay_ms" file.  The only difference
+is that the newer file expresses the delay in milliseconds whereas the
+older file uses seconds.  Confusingly, both files are present in 2.6.37
+but only "autosuspend" works.)
 
 	power/wakeup
 
@@ -140,33 +145,36 @@ as of the 2.6.35 kernel and replaced by the "control" file.)
 		suspended and autoresume was not allowed.  This
 		setting is no longer supported.)
 
-	power/autosuspend
+	power/autosuspend_delay_ms
 
 		This file contains an integer value, which is the
-		number of seconds the device should remain idle before
-		the kernel will autosuspend it (the idle-delay time).
-		The default is 2.  0 means to autosuspend as soon as
-		the device becomes idle, and negative values mean
-		never to autosuspend.  You can write a number to the
-		file to change the autosuspend idle-delay time.
-
-Writing "-1" to power/autosuspend and writing "on" to power/control do
-essentially the same thing -- they both prevent the device from being
-autosuspended.  Yes, this is a redundancy in the API.
+		number of milliseconds the device should remain idle
+		before the kernel will autosuspend it (the idle-delay
+		time).  The default is 2000.  0 means to autosuspend
+		as soon as the device becomes idle, and negative
+		values mean never to autosuspend.  You can write a
+		number to the file to change the autosuspend
+		idle-delay time.
+
+Writing "-1" to power/autosuspend_delay_ms and writing "on" to
+power/control do essentially the same thing -- they both prevent the
+device from being autosuspended.  Yes, this is a redundancy in the
+API.
 
 (In 2.6.21 writing "0" to power/autosuspend would prevent the device
 from being autosuspended; the behavior was changed in 2.6.22.  The
 power/autosuspend attribute did not exist prior to 2.6.21, and the
 power/level attribute did not exist prior to 2.6.22.  power/control
-was added in 2.6.34.)
+was added in 2.6.34, and power/autosuspend_delay_ms was added in
+2.6.37 but did not become functional until 2.6.38.)
 
 
 	Changing the default idle-delay time
 	------------------------------------
 
-The default autosuspend idle-delay time is controlled by a module
-parameter in usbcore.  You can specify the value when usbcore is
-loaded.  For example, to set it to 5 seconds instead of 2 you would
+The default autosuspend idle-delay time (in seconds) is controlled by
+a module parameter in usbcore.  You can specify the value when usbcore
+is loaded.  For example, to set it to 5 seconds instead of 2 you would
 do:
 
 	modprobe usbcore autosuspend=5
@@ -234,25 +242,23 @@ every device.
 
 If a driver knows that its device has proper suspend/resume support,
 it can enable autosuspend all by itself.  For example, the video
-driver for a laptop's webcam might do this, since these devices are
-rarely used and so should normally be autosuspended.
+driver for a laptop's webcam might do this (in recent kernels they
+do), since these devices are rarely used and so should normally be
+autosuspended.
 
 Sometimes it turns out that even when a device does work okay with
-autosuspend there are still problems.  For example, there are
-experimental patches adding autosuspend support to the usbhid driver,
-which manages keyboards and mice, among other things.  Tests with a
-number of keyboards showed that typing on a suspended keyboard, while
-causing the keyboard to do a remote wakeup all right, would
-nonetheless frequently result in lost keystrokes.  Tests with mice
-showed that some of them would issue a remote-wakeup request in
-response to button presses but not to motion, and some in response to
-neither.
+autosuspend there are still problems.  For example, the usbhid driver,
+which manages keyboards and mice, has autosuspend support.  Tests with
+a number of keyboards show that typing on a suspended keyboard, while
+causing the keyboard to do a remote wakeup all right, will nonetheless
+frequently result in lost keystrokes.  Tests with mice show that some
+of them will issue a remote-wakeup request in response to button
+presses but not to motion, and some in response to neither.
 
 The kernel will not prevent you from enabling autosuspend on devices
 that can't handle it.  It is even possible in theory to damage a
-device by suspending it at the wrong time -- for example, suspending a
-USB hard disk might cause it to spin down without parking the heads.
-(Highly unlikely, but possible.)  Take care.
+device by suspending it at the wrong time.  (Highly unlikely, but
+possible.)  Take care.
 
 
 	The driver interface for Power Management
@@ -336,10 +342,6 @@ autosuspend the interface's device.  When the usage counter is = 0
 then the interface is considered to be idle, and the kernel may
 autosuspend the device.
 
-(There is a similar usage counter field in struct usb_device,
-associated with the device itself rather than any of its interfaces.
-This counter is used only by the USB core.)
-
 Drivers need not be concerned about balancing changes to the usage
 counter; the USB core will undo any remaining "get"s when a driver
 is unbound from its interface.  As a corollary, drivers must not call
@@ -409,11 +411,11 @@ during autosuspend.  For example, there's not much point
 autosuspending a keyboard if the user can't cause the keyboard to do a
 remote wakeup by typing on it.  If the driver sets
 intf->needs_remote_wakeup to 1, the kernel won't autosuspend the
-device if remote wakeup isn't available or has been disabled through
-the power/wakeup attribute.  (If the device is already autosuspended,
-though, setting this flag won't cause the kernel to autoresume it.
-Normally a driver would set this flag in its probe method, at which
-time the device is guaranteed not to be autosuspended.)
+device if remote wakeup isn't available.  (If the device is already
+autosuspended, though, setting this flag won't cause the kernel to
+autoresume it.  Normally a driver would set this flag in its probe
+method, at which time the device is guaranteed not to be
+autosuspended.)
 
 If a driver does its I/O asynchronously in interrupt context, it
 should call usb_autopm_get_interface_async() before starting output and
@@ -422,20 +424,19 @@ it receives an input event, it should call
 
 	usb_mark_last_busy(struct usb_device *udev);
 
-in the event handler.  This sets udev->last_busy to the current time.
-udev->last_busy is the field used for idle-delay calculations;
-updating it will cause any pending autosuspend to be moved back.  Most
-of the usb_autopm_* routines will also set the last_busy field to the
-current time.
+in the event handler.  This tells the PM core that the device was just
+busy and therefore the next autosuspend idle-delay expiration should
+be pushed back.  Many of the usb_autopm_* routines also make this call,
+so drivers need to worry only when interrupt-driven input arrives.
 
 Asynchronous operation is always subject to races.  For example, a
-driver may call one of the usb_autopm_*_interface_async() routines at
-a time when the core has just finished deciding the device has been
-idle for long enough but not yet gotten around to calling the driver's
-suspend method.  The suspend method must be responsible for
-synchronizing with the output request routine and the URB completion
-handler; it should cause autosuspends to fail with -EBUSY if the
-driver needs to use the device.
+driver may call the usb_autopm_get_interface_async() routine at a time
+when the core has just finished deciding the device has been idle for
+long enough but not yet gotten around to calling the driver's suspend
+method.  The suspend method must be responsible for synchronizing with
+the I/O request routine and the URB completion handler; it should
+cause autosuspends to fail with -EBUSY if the driver needs to use the
+device.
 
 External suspend calls should never be allowed to fail in this way,
 only autosuspend calls.  The driver can tell them apart by checking
@@ -472,7 +473,9 @@ Firstly, a device may already be autosuspended when a system suspend
 occurs.  Since system suspends are supposed to be as transparent as
 possible, the device should remain suspended following the system
 resume.  But this theory may not work out well in practice; over time
-the kernel's behavior in this regard has changed.
+the kernel's behavior in this regard has changed.  As of 2.6.37 the
+policy is to resume all devices during a system resume and let them
+handle their own runtime suspends afterward.
 
 Secondly, a dynamic power-management event may occur as a system
 suspend is underway.  The window for this is short, since system
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index ac2616a62fc..31b485723bc 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,5 +1,5 @@
   0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
-  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2863,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868]
+  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2862,eb1a:2863,eb1a:2870,eb1a:2881,eb1a:2883,eb1a:2868,eb1a:2875]
   2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
   3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
   4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200,2040:4201]
@@ -9,7 +9,7 @@
   8 -> Kworld USB2800                           (em2800)
   9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker  (em2820/em2840) [1b80:e302,1b80:e304,2304:0207,2304:021a]
  10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
- 11 -> Terratec Hybrid XS                       (em2880)        [0ccd:0042]
+ 11 -> Terratec Hybrid XS                       (em2880)
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
  13 -> Terratec Prodigy XS                      (em2880)        [0ccd:0047]
  14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
@@ -53,7 +53,7 @@
  52 -> DNT DA2 Hybrid                           (em2881)
  53 -> Pinnacle Hybrid Pro                      (em2881)
  54 -> Kworld VS-DVB-T 323UR                    (em2882)        [eb1a:e323]
- 55 -> Terratec Hybrid XS (em2882)              (em2882)        [0ccd:005e]
+ 55 -> Terratec Cinnergy Hybrid T USB XS (em2882) (em2882)        [0ccd:005e,0ccd:0042]
  56 -> Pinnacle Hybrid Pro (2)                  (em2882)        [2304:0226]
  57 -> Kworld PlusTV HD Hybrid 330              (em2883)        [eb1a:a316]
  58 -> Compro VideoMate ForYou/Stereo           (em2820/em2840) [185b:2041]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 8d9afc7d801..6b4c72d8862 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -180,3 +180,5 @@
 179 -> Beholder BeholdTV A7                     [5ace:7090]
 180 -> Avermedia PCI M733A                      [1461:4155,1461:4255]
 181 -> TechoTrend TT-budget T-3000              [13c2:2804]
+182 -> Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid  [17de:b136]
+183 -> Compro VideoMate Vista M1F               [185b:c900]
diff --git a/Documentation/video4linux/Makefile b/Documentation/video4linux/Makefile
deleted file mode 100644
index 1ed0e98d057..00000000000
--- a/Documentation/video4linux/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# kbuild trick to avoid linker error. Can be omitted if a module is built.
-obj- := dummy.o
-
-# List of programs to build
-hostprogs-y := v4lgrab
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
diff --git a/Documentation/video4linux/README.cpia b/Documentation/video4linux/README.cpia
deleted file mode 100644
index 8a747fee661..00000000000
--- a/Documentation/video4linux/README.cpia
+++ /dev/null
@@ -1,191 +0,0 @@
-This is a driver for the CPiA PPC2 driven parallel connected
-Camera. For example the Creative WebcamII is CPiA driven.
-
-   ) [1]Peter Pregler, Linz 2000, published under the [2]GNU GPL
-
----------------------------------------------------------------------------
-
-USAGE:
-
-General:
-========
-
-1) Make sure you have created the video devices (/dev/video*):
-
-- if you have a recent MAKEDEV do a 'cd /dev;./MAKEDEV video'
-- otherwise do a:
-
-cd /dev
-mknod video0 c 81 0
-ln -s video0 video
-
-2) Compile the kernel (see below for the list of options to use),
-   configure your parport and reboot.
-
-3) If all worked well you should get messages similar
-   to the following (your versions may be different) on the console:
-
-V4L-Driver for Vision CPiA based cameras v0.7.4
-parport0: read2 timeout.
-parport0: Multimedia device, VLSI Vision Ltd PPC2
-Parallel port driver for Vision CPiA based camera
-  CPIA Version: 1.20 (2.0)
-  CPIA PnP-ID: 0553:0002:0100
-  VP-Version: 1.0 0100
-  1 camera(s) found
-
-
-As modules:
-===========
-
-Make sure you have selected the following kernel options (you can
-select all stuff as modules):
-
-The cpia-stuff is in the section 'Character devices -> Video For Linux'.
-
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_CPIA=m
-CONFIG_VIDEO_CPIA_PP=m
-
-For autoloading of all those modules you need to tell module-init-tools
-some stuff. Add the following line to your module-init-tools config-file
-(e.g. /etc/modprobe.conf or wherever your distribution does store that
-stuff):
-
-options parport_pc io=0x378 irq=7 dma=3
-alias char-major-81 cpia_pp
-
-The first line tells the dma/irq channels to use. Those _must_ match
-the settings of your BIOS. Do NOT simply use the values above.  See
-Documentation/parport.txt for more information about this. The second
-line associates the video-device file with the driver. Of cause you
-can also load the modules once upon boot (usually done in /etc/modules).
-
-Linked into the kernel:
-=======================
-
-Make sure you have selected the following kernel options. Note that
-you cannot compile the parport-stuff as modules and the cpia-driver
-statically (the other way round is okay though).
-
-The cpia-stuff is in the section 'Character devices -> Video For Linux'.
-
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_1284=y
-CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_CPIA=y
-CONFIG_VIDEO_CPIA_PP=y
-
-To use DMA/irq you will need to tell the kernel upon boot time the
-hardware configuration of the parport. You can give the boot-parameter
-at the LILO-prompt or specify it in lilo.conf. I use the following
-append-line in lilo.conf:
-
-	append="parport=0x378,7,3"
-
-See Documentation/parport.txt for more information about the
-configuration of the parport and the values given above. Do not simply
-use the values given above.
-
----------------------------------------------------------------------------
-FEATURES:
-
-- mmap/read v4l-interface (but no overlay)
-- image formats: CIF/QCIF, SIF/QSIF, various others used by isabel;
-  note: all sizes except CIF/QCIF are implemented by clipping, i.e.
-  pixels are not uploaded from the camera
-- palettes: VIDEO_PALETTE_GRAY, VIDEO_PALETTE_RGB565, VIDEO_PALETTE_RGB555,
-  VIDEO_PALETTE_RGB24, VIDEO_PALETTE_RGB32, VIDEO_PALETTE_YUYV,
-  VIDEO_PALETTE_UYVY, VIDEO_PALETTE_YUV422
-- state information (color balance, exposure, ...) is preserved between
-  device opens
-- complete control over camera via proc-interface (_all_ camera settings are
-  supported), there is also a python-gtk application available for this [3]
-- works under SMP (but the driver is completely serialized and synchronous)
-  so you get no benefit from SMP, but at least it does not crash your box
-- might work for non-Intel architecture, let us know about this
-
----------------------------------------------------------------------------
-TESTED APPLICATIONS:
-
-- a simple test application based on Xt is available at [3]
-- another test-application based on gqcam-0.4 (uses GTK)
-- gqcam-0.6 should work
-- xawtv-3.x (also the webcam software)
-- xawtv-2.46
-- w3cam (cgi-interface and vidcat, e.g. you may try out 'vidcat  |xv
-  -maxpect -root -quit +noresetroot -rmode 5 -')
-- vic, the MBONE video conferencing tool (version 2.8ucl4-1)
-- isabel 3R4beta (barely working, but AFAICT all the problems are on
-  their side)
-- camserv-0.40
-
-See [3] for pointers to v4l-applications.
-
----------------------------------------------------------------------------
-KNOWN PROBLEMS:
-
-- some applications do not handle the image format correctly, you will
-  see strange horizontal stripes instead of a nice picture -> make sure
-  your application does use a supported image size or queries the driver
-  for the actually used size (reason behind this: the camera cannot
-  provide any image format, so if size NxM is requested the driver will
-  use a format to the closest fitting N1xM1, the application should now
-  query for this granted size, most applications do not).
-- all the todo ;)
-- if there is not enough light and the picture is too dark try to
-  adjust the SetSensorFPS setting, automatic frame rate adjustment
-  has its price
-- do not try out isabel 3R4beta (built 135), you will be disappointed
-
----------------------------------------------------------------------------
-TODO:
-
-- multiple camera support (struct camera or something) - This should work,
-  but hasn't been tested yet.
-- architecture independence?
-- SMP-safe asynchronous mmap interface
-- nibble mode for old parport interfaces
-- streaming capture, this should give a performance gain
-
----------------------------------------------------------------------------
-IMPLEMENTATION NOTES:
-
-The camera can act in two modes, streaming or grabbing. Right now a
-polling grab-scheme is used. Maybe interrupt driven streaming will be
-used for a asynchronous mmap interface in the next major release of the
-driver. This might give a better frame rate.
-
----------------------------------------------------------------------------
-THANKS (in no particular order):
-
-- Scott J. Bertin <sbertin@mindspring.com> for cleanups, the proc-filesystem
-  and much more
-- Henry Bruce <whb@vvl.co.uk> for providing developers information about
-  the CPiA chip, I wish all companies would treat Linux as seriously
-- Karoly Erdei <Karoly.Erdei@risc.uni-linz.ac.at> and RISC-Linz for being
-  my boss ;) resp. my employer and for providing me the hardware and
-  allow me to devote some working time to this project
-- Manuel J. Petit de Gabriel <mpetit@dit.upm.es> for providing help
-  with Isabel (http://isabel.dit.upm.es/)
-- Bas Huisman <bhuism@cs.utwente.nl> for writing the initial parport code
-- Jarl Totland <Jarl.Totland@bdc.no> for setting up the mailing list
-  and maintaining the web-server[3]
-- Chris Whiteford <Chris@informinteractive.com> for fixes related to the
-  1.02 firmware
-- special kudos to all the tester whose machines crashed and/or
-  will crash. :)
-
----------------------------------------------------------------------------
-REFERENCES
-
-   1. http://www.risc.uni-linz.ac.at/
-      mailto:Peter_Pregler@email.com
-   2. see the file COPYING in the top directory of the kernel tree
-   3. http://webcam.sourceforge.net/
diff --git a/Documentation/video4linux/Zoran b/Documentation/video4linux/Zoran
index 00e3f926781..699b60e070d 100644
--- a/Documentation/video4linux/Zoran
+++ b/Documentation/video4linux/Zoran
@@ -322,76 +322,11 @@ your IRQs and make sure the card has its own interrupts.
 
 4. Programming interface
 
-This driver conforms to video4linux and video4linux2, both can be used to
-use the driver. Since video4linux didn't provide adequate calls to fully
-use the cards' features, we've introduced several programming extensions,
-which are currently officially accepted in the 2.4.x branch of the kernel.
-These extensions are known as the v4l/mjpeg extensions. See zoran.h for
-details (structs/ioctls).
-
-Information - video4linux:
-http://linux.bytesex.org/v4l2/API.html
-Documentation/video4linux/API.html
-/usr/include/linux/videodev.h
-
-Information - video4linux/mjpeg extensions:
-./zoran.h
-(also see below)
-
-Information - video4linux2:
-http://linuxtv.org
-http://v4l2spec.bytesex.org/
-/usr/include/linux/videodev2.h
-
-More information on the video4linux/mjpeg extensions, by Serguei
-Miridonovi and Rainer Johanni:
---
-The ioctls for that interface are as follows:
-
-BUZIOC_G_PARAMS
-BUZIOC_S_PARAMS
-
-Get and set the parameters of the buz. The user should always do a
-BUZIOC_G_PARAMS (with a struct buz_params) to obtain the default
-settings, change what he likes and then make a BUZIOC_S_PARAMS call.
-
-BUZIOC_REQBUFS
-
-Before being able to capture/playback, the user has to request
-the buffers he is wanting to use. Fill the structure
-zoran_requestbuffers with the size (recommended: 256*1024) and
-the number (recommended 32 up to 256). There are no such restrictions
-as for the Video for Linux buffers, you should LEAVE SUFFICIENT
-MEMORY for your system however, else strange things will happen ....
-On return, the zoran_requestbuffers structure contains number and
-size of the actually allocated buffers.
-You should use these numbers for doing a mmap of the buffers
-into the user space.
-The BUZIOC_REQBUFS ioctl also makes it happen, that the next mmap
-maps the MJPEG buffer instead of the V4L buffers.
-
-BUZIOC_QBUF_CAPT
-BUZIOC_QBUF_PLAY
-
-Queue a buffer for capture or playback. The first call also starts
-streaming capture. When streaming capture is going on, you may
-only queue further buffers or issue syncs until streaming
-capture is switched off again with a argument of -1 to
-a BUZIOC_QBUF_CAPT/BUZIOC_QBUF_PLAY ioctl.
-
-BUZIOC_SYNC
-
-Issue this ioctl when all buffers are queued. This ioctl will
-block until the first buffer becomes free for saving its
-data to disk (after BUZIOC_QBUF_CAPT) or for reuse (after BUZIOC_QBUF_PLAY).
-
-BUZIOC_G_STATUS
-
-Get the status of the input lines (video source connected/norm).
+This driver conforms to video4linux2. Support for V4L1 and for the custom
+zoran ioctls has been removed in kernel 2.6.38.
 
 For programming example, please, look at lavrec.c and lavplay.c code in
-lavtools-1.2p2 package (URL: http://www.cicese.mx/)
-and the 'examples' directory in the original Buz driver distribution.
+the MJPEG-tools (http://mjpeg.sf.net/).
 
 Additional notes for software developers:
 
@@ -402,9 +337,6 @@ Additional notes for software developers:
    standard is "more constant" for current country than geometry
    settings of a variety of TV capture cards which may work in ITU or
    square pixel format.
---
-Please note that lavplay/lavrec are also included in the MJPEG-tools
-(http://mjpeg.sf.net/).
 
 ===========================
 
diff --git a/Documentation/video4linux/bttv/Cards b/Documentation/video4linux/bttv/Cards
index 12217fc4972..db833ced2cb 100644
--- a/Documentation/video4linux/bttv/Cards
+++ b/Documentation/video4linux/bttv/Cards
@@ -464,10 +464,6 @@ Siemens
 -------
    Multimedia eXtension Board (MXB) (SAA7146, SAA7111)
 
-Stradis
--------
-   SDM275,SDM250,SDM026,SDM025 (SAA7146, IBMMPEG2): MPEG2 decoder only
-
 Powercolor
 ----------
    MTV878
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 6a562eeeb4c..261776e0c5e 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -366,6 +366,7 @@ t613		17a1:0128	TASCORP JPEG Webcam, NGS Cyclops
 vc032x		17ef:4802	Lenovo Vc0323+MI1310_SOC
 pac207		2001:f115	D-Link DSB-C120
 sq905c		2770:9050	Disney pix micro (CIF)
+sq905c		2770:9051	Lego Bionicle
 sq905c		2770:9052	Disney pix micro 2 (VGA)
 sq905c		2770:905c	All 11 known cameras with this ID
 sq905		2770:9120	All 24 known cameras with this ID
diff --git a/Documentation/video4linux/meye.txt b/Documentation/video4linux/meye.txt
index bf3af5fe558..34e2842c70a 100644
--- a/Documentation/video4linux/meye.txt
+++ b/Documentation/video4linux/meye.txt
@@ -45,8 +45,6 @@ module argument syntax (<param>=<value> when passing the option to the
 module or meye.<param>=<value> on the kernel boot line when meye is
 statically linked into the kernel). Those options are:
 
-	forcev4l1:	force use of V4L1 API instead of V4L2
-
 	gbuffers:	number of capture buffers, default is 2 (32 max)
 
 	gbufsize:	size of each capture buffer, default is 614400
@@ -79,9 +77,8 @@ Usage:
 Private API:
 ------------
 
-	The driver supports frame grabbing with the video4linux API
-	(either v4l1 or v4l2), so all video4linux tools (like xawtv)
-	should work with this driver.
+	The driver supports frame grabbing with the video4linux API,
+	so all video4linux tools (like xawtv) should work with this driver.
 
 	Besides the video4linux interface, the driver has a private interface
 	for accessing the Motion Eye extended parameters (camera sharpness,
@@ -123,7 +120,4 @@ Private API:
 Bugs / Todo:
 ------------
 
-	- the driver could be much cleaned up by removing the v4l1 support.
-	  However, this means all v4l1-only applications will stop working.
-
 	- 'motioneye' still uses the meye private v4l1 API extensions.
diff --git a/Documentation/video4linux/v4lgrab.c b/Documentation/video4linux/v4lgrab.c
deleted file mode 100644
index c8ded175796..00000000000
--- a/Documentation/video4linux/v4lgrab.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/* Simple Video4Linux image grabber. */
-/*
- *	Video4Linux Driver Test/Example Framegrabbing Program
- *
- *	Compile with:
- *		gcc -s -Wall -Wstrict-prototypes v4lgrab.c -o v4lgrab
- *	Use as:
- *		v4lgrab >image.ppm
- *
- *	Copyright (C) 1998-05-03, Phil Blundell <philb@gnu.org>
- *	Copied from http://www.tazenda.demon.co.uk/phil/vgrabber.c
- *	with minor modifications (Dave Forrest, drf5n@virginia.edu).
- *
- *
- *	For some cameras you may need to pre-load libv4l to perform
- *	the necessary decompression, e.g.:
- *
- *	export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so
- *	./v4lgrab >image.ppm
- *
- *	see http://hansdegoede.livejournal.com/3636.html for details.
- *
- */
-
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <sys/ioctl.h>
-#include <stdlib.h>
-
-#include <linux/types.h>
-#include <linux/videodev.h>
-
-#define VIDEO_DEV "/dev/video0"
-
-/* Stole this from tvset.c */
-
-#define READ_VIDEO_PIXEL(buf, format, depth, r, g, b)                   \
-{                                                                       \
-	switch (format)                                                 \
-	{                                                               \
-		case VIDEO_PALETTE_GREY:                                \
-			switch (depth)                                  \
-			{                                               \
-				case 4:                                 \
-				case 6:                                 \
-				case 8:                                 \
-					(r) = (g) = (b) = (*buf++ << 8);\
-					break;                          \
-									\
-				case 16:                                \
-					(r) = (g) = (b) =               \
-						*((unsigned short *) buf);      \
-					buf += 2;                       \
-					break;                          \
-			}                                               \
-			break;                                          \
-									\
-									\
-		case VIDEO_PALETTE_RGB565:                              \
-		{                                                       \
-			unsigned short tmp = *(unsigned short *)buf;    \
-			(r) = tmp&0xF800;                               \
-			(g) = (tmp<<5)&0xFC00;                          \
-			(b) = (tmp<<11)&0xF800;                         \
-			buf += 2;                                       \
-		}                                                       \
-		break;                                                  \
-									\
-		case VIDEO_PALETTE_RGB555:                              \
-			(r) = (buf[0]&0xF8)<<8;                         \
-			(g) = ((buf[0] << 5 | buf[1] >> 3)&0xF8)<<8;    \
-			(b) = ((buf[1] << 2 ) & 0xF8)<<8;               \
-			buf += 2;                                       \
-			break;                                          \
-									\
-		case VIDEO_PALETTE_RGB24:                               \
-			(r) = buf[0] << 8; (g) = buf[1] << 8;           \
-			(b) = buf[2] << 8;                              \
-			buf += 3;                                       \
-			break;                                          \
-									\
-		default:                                                \
-			fprintf(stderr,                                 \
-				"Format %d not yet supported\n",        \
-				format);                                \
-	}                                                               \
-}
-
-static int get_brightness_adj(unsigned char *image, long size, int *brightness) {
-  long i, tot = 0;
-  for (i=0;i<size*3;i++)
-    tot += image[i];
-  *brightness = (128 - tot/(size*3))/3;
-  return !((tot/(size*3)) >= 126 && (tot/(size*3)) <= 130);
-}
-
-int main(int argc, char ** argv)
-{
-  int fd = open(VIDEO_DEV, O_RDONLY), f;
-  struct video_capability cap;
-  struct video_window win;
-  struct video_picture vpic;
-
-  unsigned char *buffer, *src;
-  int bpp = 24, r = 0, g = 0, b = 0;
-  unsigned int i, src_depth = 16;
-
-  if (fd < 0) {
-    perror(VIDEO_DEV);
-    exit(1);
-  }
-
-  if (ioctl(fd, VIDIOCGCAP, &cap) < 0) {
-    perror("VIDIOGCAP");
-    fprintf(stderr, "(" VIDEO_DEV " not a video4linux device?)\n");
-    close(fd);
-    exit(1);
-  }
-
-  if (ioctl(fd, VIDIOCGWIN, &win) < 0) {
-    perror("VIDIOCGWIN");
-    close(fd);
-    exit(1);
-  }
-
-  if (ioctl(fd, VIDIOCGPICT, &vpic) < 0) {
-    perror("VIDIOCGPICT");
-    close(fd);
-    exit(1);
-  }
-
-  if (cap.type & VID_TYPE_MONOCHROME) {
-    vpic.depth=8;
-    vpic.palette=VIDEO_PALETTE_GREY;    /* 8bit grey */
-    if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
-      vpic.depth=6;
-      if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
-	vpic.depth=4;
-	if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
-	  fprintf(stderr, "Unable to find a supported capture format.\n");
-	  close(fd);
-	  exit(1);
-	}
-      }
-    }
-  } else {
-    vpic.depth=24;
-    vpic.palette=VIDEO_PALETTE_RGB24;
-
-    if(ioctl(fd, VIDIOCSPICT, &vpic) < 0) {
-      vpic.palette=VIDEO_PALETTE_RGB565;
-      vpic.depth=16;
-
-      if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
-	vpic.palette=VIDEO_PALETTE_RGB555;
-	vpic.depth=15;
-
-	if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
-	  fprintf(stderr, "Unable to find a supported capture format.\n");
-	  return -1;
-	}
-      }
-    }
-  }
-
-  buffer = malloc(win.width * win.height * bpp);
-  if (!buffer) {
-    fprintf(stderr, "Out of memory.\n");
-    exit(1);
-  }
-
-  do {
-    int newbright;
-    read(fd, buffer, win.width * win.height * bpp);
-    f = get_brightness_adj(buffer, win.width * win.height, &newbright);
-    if (f) {
-      vpic.brightness += (newbright << 8);
-      if(ioctl(fd, VIDIOCSPICT, &vpic)==-1) {
-	perror("VIDIOSPICT");
-	break;
-      }
-    }
-  } while (f);
-
-  fprintf(stdout, "P6\n%d %d 255\n", win.width, win.height);
-
-  src = buffer;
-
-  for (i = 0; i < win.width * win.height; i++) {
-    READ_VIDEO_PIXEL(src, vpic.palette, src_depth, r, g, b);
-    fputc(r>>8, stdout);
-    fputc(g>>8, stdout);
-    fputc(b>>8, stdout);
-  }
-
-  close(fd);
-  return 0;
-}
diff --git a/Documentation/video4linux/videobuf b/Documentation/video4linux/videobuf
index 17a1f9abf26..1d00d7f15b8 100644
--- a/Documentation/video4linux/videobuf
+++ b/Documentation/video4linux/videobuf
@@ -247,8 +247,6 @@ calls.  The relevant helper functions are:
 		       int nonblocking);
     int videobuf_streamon(struct videobuf_queue *q);
     int videobuf_streamoff(struct videobuf_queue *q);
-    int videobuf_cgmbuf(struct videobuf_queue *q, struct video_mbuf *mbuf,
-			int count);
 
 So, for example, a VIDIOC_REQBUFS call turns into a call to the driver's
 vidioc_reqbufs() callback which, in turn, usually only needs to locate the
@@ -258,10 +256,7 @@ boilerplate in a lot of V4L2 drivers.
 
 The vidioc_streamon() and vidioc_streamoff() functions will be a bit more
 complex, of course, since they will also need to deal with starting and
-stopping the capture engine.  videobuf_cgmbuf(), called from the driver's
-vidiocgmbuf() function, only exists if the V4L1 compatibility module has
-been selected with CONFIG_VIDEO_V4L1_COMPAT, so its use must be surrounded
-with #ifdef directives.
+stopping the capture engine.
 
 Buffer allocation
 
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index 30b43e1b269..bdeb81ccb5f 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -600,6 +600,7 @@ Protocol:	2.07+
   0x00000001	lguest
   0x00000002	Xen
   0x00000003	Moorestown MID
+  0x00000004	CE4100 TV Platform
 
 Field name:	hardware_subarch_data
 Type:		write (subarch-dependent)
diff --git a/MAINTAINERS b/MAINTAINERS
index 0094224ca79..23d04363a19 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -161,14 +161,13 @@ M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
-M:	Paul Gortmaker <p_gortmaker@yahoo.com>
 L:	netdev@vger.kernel.org
-S:	Maintained
+S:	Orphan / Obsolete
 F:	drivers/net/*8390*
 F:	drivers/net/ax88796.c
 
@@ -405,7 +404,7 @@ S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*
 
 AMD GEODE PROCESSOR/CHIPSET SUPPORT
-P:	Jordan Crouse
+P:	Andres Salomon <dilinger@queued.net>
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
 S:	Supported
@@ -559,14 +558,14 @@ W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
 ARM/BCMRING ARM ARCHITECTURE
-M:	Leo Chen <leochen@broadcom.com>
+M:	Jiandong Zheng <jdzheng@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-bcmring
 
 ARM/BCMRING MTD NAND DRIVER
-M:	Leo Chen <leochen@broadcom.com>
+M:	Jiandong Zheng <jdzheng@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
@@ -792,11 +791,14 @@ S:	Maintained
 
 ARM/NOMADIK ARCHITECTURE
 M:	Alessandro Rubini <rubini@unipv.it>
+M:	Linus Walleij <linus.walleij@stericsson.com>
 M:	STEricsson <STEricsson_nomadik_linux@list.st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-nomadik/
 F:	arch/arm/plat-nomadik/
+F:	drivers/i2c/busses/i2c-nomadik.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 
 ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
 M:	Nelson Castillo <arhuaco@freaks-unidos.net>
@@ -815,7 +817,7 @@ F:	drivers/mmc/host/msm_sdcc.c
 F:	drivers/mmc/host/msm_sdcc.h
 F:	drivers/serial/msm_serial.h
 F:	drivers/serial/msm_serial.c
-T:	git git://codeaurora.org/quic/kernel/dwalker/linux-msm.git
+T:	git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
 S:	Maintained
 
 ARM/TOSA MACHINE SUPPORT
@@ -945,7 +947,7 @@ M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-sh@vger.kernel.org
 W:	http://oss.renesas.com
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git rmobile-latest
 S:	Supported
 F:	arch/arm/mach-shmobile/
 F:	drivers/sh/
@@ -998,12 +1000,24 @@ F:	drivers/i2c/busses/i2c-stu300.c
 F:	drivers/rtc/rtc-coh901331.c
 F:	drivers/watchdog/coh901327_wdt.c
 F:	drivers/dma/coh901318*
+F:	drivers/mfd/ab3100*
+F:	drivers/rtc/rtc-ab3100.c
+F:	drivers/rtc/rtc-coh901331.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 
-ARM/U8500 ARM ARCHITECTURE
+ARM/Ux500 ARM ARCHITECTURE
 M:	Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+M:	Linus Walleij <linus.walleij@stericsson.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ux500/
+F:	drivers/dma/ste_dma40*
+F:	drivers/mfd/ab3550*
+F:	drivers/mfd/abx500*
+F:	drivers/mfd/ab8500*
+F:	drivers/mfd/stmpe*
+F:	drivers/rtc/rtc-ab8500.c
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 
 ARM/VFP SUPPORT
 M:	Russell King <linux@arm.linux.org.uk>
@@ -1080,6 +1094,12 @@ S:	Supported
 F:	Documentation/aoe/
 F:	drivers/block/aoe/
 
+ATHEROS ATH GENERIC UTILITIES
+M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+L:	linux-wireless@vger.kernel.org
+S:	Supported
+F:	drivers/net/wireless/ath/*
+
 ATHEROS ATH5K WIRELESS DRIVER
 M:	Jiri Slaby <jirislaby@gmail.com>
 M:	Nick Kossifidis <mickflemm@gmail.com>
@@ -1258,6 +1278,15 @@ S:	Maintained
 F:	drivers/video/backlight/
 F:	include/linux/backlight.h
 
+BATMAN ADVANCED
+M:	Marek Lindner <lindner_marek@yahoo.de>
+M:	Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
+M:	Sven Eckelmann <sven@narfation.org>
+L:	b.a.t.m.a.n@lists.open-mesh.org
+W:	http://www.open-mesh.org/
+S:	Maintained
+F:	net/batman-adv/
+
 BAYCOM/HDLCDRV DRIVERS FOR AX.25
 M:	Thomas Sailer <t.sailer@alumni.ethz.ch>
 L:	linux-hams@vger.kernel.org
@@ -1359,7 +1388,7 @@ F:	include/net/bluetooth/
 
 BONDING DRIVER
 M:	Jay Vosburgh <fubar@us.ibm.com>
-L:	bonding-devel@lists.sourceforge.net
+L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
 F:	drivers/net/bonding/
@@ -1829,6 +1858,13 @@ W:	http://www.chelsio.com
 S:	Supported
 F:	drivers/net/cxgb4vf/
 
+STMMAC ETHERNET DRIVER
+M:	Giuseppe Cavallaro <peppe.cavallaro@st.com>
+L:	netdev@vger.kernel.org
+W:	http://www.stlinux.com
+S:	Supported
+F:	drivers/net/stmmac/
+
 CYBERPRO FB DRIVER
 M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2008,6 +2044,7 @@ F:	drivers/hwmon/dme1737.c
 DOCBOOK FOR DOCUMENTATION
 M:	Randy Dunlap <rdunlap@xenotime.net>
 S:	Maintained
+F:	scripts/kernel-doc
 
 DOCKING STATION DRIVER
 M:	Shaohua Li <shaohua.li@intel.com>
@@ -2018,6 +2055,7 @@ F:	drivers/acpi/dock.c
 DOCUMENTATION
 M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
+T:	quilt oss.oracle.com/~rdunlap/kernel-doc-patches/current/
 S:	Maintained
 F:	Documentation/
 
@@ -2051,7 +2089,7 @@ F:	Documentation/blockdev/drbd/
 
 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
 M:	Greg Kroah-Hartman <gregkh@suse.de>
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
 S:	Supported
 F:	Documentation/kobject.txt
 F:	drivers/base/
@@ -2071,7 +2109,7 @@ F:	include/drm/
 
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Chris Wilson <chris@chris-wilson.co.uk>
-L:	intel-gfx@lists.freedesktop.org
+L:	intel-gfx@lists.freedesktop.org (subscribers-only)
 L:	dri-devel@lists.freedesktop.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
 S:	Supported
@@ -2435,9 +2473,12 @@ F:	drivers/net/wan/sdla.c
 FRAMEBUFFER LAYER
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
+Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
 S:	Orphan
 F:	Documentation/fb/
-F:	drivers/video/fb*
+F:	drivers/video/
+F:	include/video/
 F:	include/linux/fb.h
 
 FREESCALE DMA DRIVER
@@ -2785,6 +2826,10 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
 F:	Documentation/timers/
 F:	kernel/hrtimer.c
+F:	kernel/time/clockevents.c
+F:	kernel/time/tick*.*
+F:	kernel/time/timer_*.c
+F	include/linux/clockevents.h
 F:	include/linux/hrtimer.h
 
 HIGH-SPEED SCC DRIVER FOR AX.25
@@ -3020,8 +3065,10 @@ F:	drivers/input/
 INPUT MULTITOUCH (MT) PROTOCOL
 M:	Henrik Rydberg <rydberg@euromail.se>
 L:	linux-input@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rydberg/input-mt.git
 S:	Maintained
 F:	Documentation/input/multi-touch-protocol.txt
+F:	drivers/input/input-mt.c
 K:	\b(ABS|SYN)_MT_
 
 INTEL IDLE DRIVER
@@ -3108,6 +3155,8 @@ M:	Alex Duyck <alexander.h.duyck@intel.com>
 M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://e1000.sourceforge.net/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next-2.6.git
 S:	Supported
 F:	Documentation/networking/e100.txt
 F:	Documentation/networking/e1000.txt
@@ -4052,9 +4101,8 @@ F:	drivers/scsi/NCR_D700.*
 
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
 M:	Faisal Latif <faisal.latif@intel.com>
-M:	Chien Tung <chien.tin.tung@intel.com>
 L:	linux-rdma@vger.kernel.org
-W:	http://www.neteffect.com
+W:	http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
 S:	Supported
 F:	drivers/infiniband/hw/nes/
 
@@ -4317,6 +4365,20 @@ M:	Deepak Saxena <dsaxena@plexity.net>
 S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
+OMAP HWMOD SUPPORT
+M:	Benoît Cousson <b-cousson@ti.com>
+M:	Paul Walmsley <paul@pwsan.com>
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/mach-omap2/omap_hwmod.c
+F:	arch/arm/plat-omap/include/plat/omap_hwmod.h
+
+OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
+M:	Benoît Cousson <b-cousson@ti.com>
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+
 OMAP USB SUPPORT
 M:	Felipe Balbi <balbi@ti.com>
 M:	David Brownell <dbrownell@users.sourceforge.net>
@@ -4579,7 +4641,7 @@ F:	drivers/pcmcia/
 F:	include/pcmcia/
 
 PCNET32 NETWORK DRIVER
-M:	Don Fry <pcnet32@verizon.net>
+M:	Don Fry <pcnet32@frontier.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/pcnet32.c
@@ -4591,6 +4653,16 @@ S:	Maintained
 F:	crypto/pcrypt.c
 F:	include/crypto/pcrypt.h
 
+PER-CPU MEMORY ALLOCATOR
+M:	Tejun Heo <tj@kernel.org>
+M:	Christoph Lameter <cl@linux-foundation.org>
+L:	linux-kernel@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu.git
+S:	Maintained
+F:	include/linux/percpu*.h
+F:	mm/percpu*.c
+F:	arch/*/include/asm/percpu.h
+
 PER-TASK DELAY ACCOUNTING
 M:	Balbir Singh <balbir@linux.vnet.ibm.com>
 S:	Maintained
@@ -4601,7 +4673,7 @@ PERFORMANCE EVENTS SUBSYSTEM
 M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
-M:	Arnaldo Carvalho de Melo <acme@redhat.com>
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:	Supported
 F:	kernel/perf_event*.c
 F:	include/linux/perf_event.h
@@ -5026,7 +5098,7 @@ L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Maintained
-F:	drivers/net/wireless/rtl818x/rtl8180*
+F:	drivers/net/wireless/rtl818x/rtl8180/
 
 RTL8187 WIRELESS DRIVER
 M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
@@ -5036,7 +5108,17 @@ L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Maintained
-F:	drivers/net/wireless/rtl818x/rtl8187*
+F:	drivers/net/wireless/rtl818x/rtl8187/
+
+RTL8192CE WIRELESS DRIVER
+M:	Larry Finger <Larry.Finger@lwfinger.net>
+M:	Chaoming Li <chaoming_li@realsil.com.cn>
+L:	linux-wireless@vger.kernel.org
+W:	http://linuxwireless.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
+S:	Maintained
+F:	drivers/net/wireless/rtlwifi/
+F:	drivers/net/wireless/rtlwifi/rtl8192ce/
 
 S3 SAVAGE FRAMEBUFFER DRIVER
 M:	Antonino Daplas <adaplas@gmail.com>
@@ -5116,6 +5198,18 @@ L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/s3c24xx
 
+TIMEKEEPING, NTP
+M:	John Stultz <johnstul@us.ibm.com>
+M:	Thomas Gleixner <tglx@linutronix.de>
+S:	Supported
+F:	include/linux/clocksource.h
+F:	include/linux/time.h
+F:	include/linux/timex.h
+F:	include/linux/timekeeping.h
+F:	kernel/time/clocksource.c
+F:	kernel/time/time*.c
+F:	kernel/time/ntp.c
+
 TLG2300 VIDEO4LINUX-2 DRIVER
 M:	Huang Shijie <shijie8@gmail.com>
 M:	Kang Yong <kangyong@telegent.com>
@@ -5676,7 +5770,7 @@ S:	Maintained
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@suse.de>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6.git
 L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/
@@ -5686,12 +5780,6 @@ M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
 F:	drivers/net/starfire*
 
-STRADIS MPEG-2 DECODER DRIVER
-M:	Nathan Laredo <laredo@gnu.org>
-W:	http://www.stradis.com/
-S:	Maintained
-F:	drivers/media/video/stradis.c
-
 SUN3/3X
 M:	Sam Creasey <sammy@sammy.net>
 W:	http://sammy.net/sun3/
@@ -5705,7 +5793,7 @@ M:	Paul Mundt <lethal@linux-sh.org>
 L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git sh-latest
 S:	Supported
 F:	Documentation/sh/
 F:	arch/sh/
@@ -5827,6 +5915,8 @@ M:	Chris Metcalf <cmetcalf@tilera.com>
 W:	http://www.tilera.com/scm/
 S:	Supported
 F:	arch/tile/
+F:	drivers/char/hvc_tile.c
+F:	drivers/net/tile/
 
 TLAN NETWORK DRIVER
 M:	Samuel Chessman <chessman@tux.org>
@@ -5910,7 +6000,7 @@ S:	Maintained
 TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/char/tty_*
 F:	drivers/serial/serial_core.c
 F:	include/linux/serial_core.h
@@ -5919,7 +6009,6 @@ F:	include/linux/tty.h
 
 TULIP NETWORK DRIVERS
 M:	Grant Grundler <grundler@parisc-linux.org>
-M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/tulip/
@@ -6233,7 +6322,7 @@ USB SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
 S:	Supported
 F:	Documentation/usb/
 F:	drivers/net/usb/
@@ -6571,6 +6660,15 @@ F:	include/linux/mfd/wm8400*
 F:	include/sound/wm????.h
 F:	sound/soc/codecs/wm*
 
+WORKQUEUE
+M:	Tejun Heo <tj@kernel.org>
+L:	linux-kernel@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
+S:	Maintained
+F:	include/linux/workqueue.h
+F:	kernel/workqueue.c
+F:	Documentation/workqueue.txt
+
 X.25 NETWORK LAYER
 M:	Andrew Hendry <andrew.hendry@gmail.com>
 L:	linux-x25@vger.kernel.org
@@ -6598,14 +6696,14 @@ F:	drivers/platform/x86
 
 XEN PCI SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/pci/*xen*
 F:	drivers/pci/*xen*
 
 XEN SWIOTLB SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
@@ -6613,7 +6711,7 @@ F:	drivers/xen/*swiotlb*
 XEN HYPERVISOR INTERFACE
 M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xen.org
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 L:	virtualization@lists.osdl.org
 S:	Supported
 F:	arch/x86/xen/
diff --git a/Makefile b/Makefile
index 6619720f50d..74b25559f83 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc1
+EXTRAVERSION =
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*
diff --git a/arch/Kconfig b/arch/Kconfig
index 8bf0fa652eb..f78c2be4242 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -175,4 +175,7 @@ config HAVE_PERF_EVENTS_NMI
 config HAVE_ARCH_JUMP_LABEL
 	bool
 
+config HAVE_ARCH_MUTEX_CPU_RELAX
+	bool
+
 source "kernel/gcov/Kconfig"
diff --git a/arch/alpha/include/asm/ioctls.h b/arch/alpha/include/asm/ioctls.h
index 59617c3c2be..034b6cf5d9f 100644
--- a/arch/alpha/include/asm/ioctls.h
+++ b/arch/alpha/include/asm/ioctls.h
@@ -92,6 +92,7 @@
 #define TIOCGSID	0x5429  /* Return the session ID of FD */
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	0x5453
diff --git a/arch/alpha/include/asm/perf_event.h b/arch/alpha/include/asm/perf_event.h
index fe792ca818f..5996e7a6757 100644
--- a/arch/alpha/include/asm/perf_event.h
+++ b/arch/alpha/include/asm/perf_event.h
@@ -1,10 +1,4 @@
 #ifndef __ASM_ALPHA_PERF_EVENT_H
 #define __ASM_ALPHA_PERF_EVENT_H
 
-#ifdef CONFIG_PERF_EVENTS
-extern void init_hw_perf_events(void);
-#else
-static inline void init_hw_perf_events(void)    { }
-#endif
-
 #endif /* __ASM_ALPHA_PERF_EVENT_H */
diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c
index 5f77afb88e8..4c8bb374eb0 100644
--- a/arch/alpha/kernel/irq_alpha.c
+++ b/arch/alpha/kernel/irq_alpha.c
@@ -112,8 +112,6 @@ init_IRQ(void)
 	wrent(entInt, 0);
 
 	alpha_mv.init_irq();
-
-	init_hw_perf_events();
 }
 
 /*
diff --git a/arch/alpha/kernel/perf_event.c b/arch/alpha/kernel/perf_event.c
index 1cc49683fb6..90561c45e7d 100644
--- a/arch/alpha/kernel/perf_event.c
+++ b/arch/alpha/kernel/perf_event.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/kdebug.h>
 #include <linux/mutex.h>
+#include <linux/init.h>
 
 #include <asm/hwrpb.h>
 #include <asm/atomic.h>
@@ -863,13 +864,13 @@ static void alpha_perf_event_irq_handler(unsigned long la_ptr,
 /*
  * Init call to initialise performance events at kernel startup.
  */
-void __init init_hw_perf_events(void)
+int __init init_hw_perf_events(void)
 {
 	pr_info("Performance events: ");
 
 	if (!supported_cpu()) {
 		pr_cont("No support for your CPU.\n");
-		return;
+		return 0;
 	}
 
 	pr_cont("Supported CPU type!\n");
@@ -881,6 +882,8 @@ void __init init_hw_perf_events(void)
 	/* And set up PMU specification */
 	alpha_pmu = &ev67_pmu;
 
-	perf_pmu_register(&pmu);
-}
+	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
 
+	return 0;
+}
+early_initcall(init_hw_perf_events);
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a19a5266d5f..e2f80116759 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -2,18 +2,20 @@ config ARM
 	bool
 	default y
 	select HAVE_AOUT
+	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
-	select GENERIC_ATOMIC64 if (!CPU_32v6K)
+	select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_KGDB
-	select HAVE_KPROBES if (!XIP_KERNEL)
+	select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
 	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO
@@ -23,6 +25,7 @@ config ARM
 	select PERF_USE_VMALLOC
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
+	select HAVE_C_RECORDMCOUNT
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -34,9 +37,15 @@ config ARM
 config HAVE_PWM
 	bool
 
+config MIGHT_HAVE_PCI
+	bool
+
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
+config HAVE_SCHED_CLOCK
+	bool
+
 config GENERIC_GPIO
 	bool
 
@@ -221,7 +230,7 @@ config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select PLAT_VERSATILE
@@ -231,7 +240,8 @@ config ARCH_INTEGRATOR
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
+	select HAVE_SCHED_CLOCK
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -245,7 +255,8 @@ config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
 	select ARM_AMBA
 	select ARM_VIC
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
+	select HAVE_SCHED_CLOCK
 	select ICST
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
@@ -259,9 +270,10 @@ config ARCH_VEXPRESS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
 	select ARM_TIMER_SP804
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
+	select HAVE_SCHED_CLOCK
 	select ICST
 	select PLAT_VERSATILE
 	help
@@ -280,7 +292,7 @@ config ARCH_BCMRING
 	depends on MMU
 	select CPU_V6
 	select ARM_AMBA
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
@@ -298,6 +310,7 @@ config ARCH_CNS3XXX
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select ARM_GIC
+	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	help
 	  Support for Cavium Networks CNS3XXX platform.
@@ -327,7 +340,7 @@ config ARCH_EP93XX
 	select CPU_ARM920T
 	select ARM_AMBA
 	select ARM_VIC
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_USES_GETTIMEOFFSET
@@ -347,14 +360,22 @@ config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
+config ARCH_MXS
+	bool "Freescale MXS-based"
+	select GENERIC_CLOCKEVENTS
+	select ARCH_REQUIRE_GPIOLIB
+	select COMMON_CLKDEV
+	help
+	  Support for Freescale MXS-based family of processors
+
 config ARCH_STMP3XXX
 	bool "Freescale STMP3xxx"
 	select CPU_ARM926T
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select USB_ARCH_HAS_EHCI
@@ -433,6 +454,8 @@ config ARCH_IXP4XX
 	select CPU_XSCALE
 	select GENERIC_GPIO
 	select GENERIC_CLOCKEVENTS
+	select HAVE_SCHED_CLOCK
+	select MIGHT_HAVE_PCI
 	select DMABOUNCE if PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
@@ -472,7 +495,7 @@ config ARCH_LPC32XX
 	select HAVE_IDE
 	select ARM_AMBA
 	select USB_ARCH_HAS_OHCI
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -506,8 +529,9 @@ config ARCH_MMP
 	bool "Marvell PXA168/910/MMP2"
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
+	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
@@ -539,7 +563,7 @@ config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
 	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -553,18 +577,19 @@ config ARCH_W90X900
 config ARCH_NUC93X
 	bool "Nuvoton NUC93X CPU"
 	select CPU_ARM926T
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	help
 	  Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
 	  low-power and high performance MPEG-4/JPEG multimedia controller chip.
 
 config ARCH_TEGRA
 	bool "NVIDIA Tegra"
+	select CLKDEV_LOOKUP
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select COMMON_CLKDEV
+	select HAVE_SCHED_CLOCK
 	select ARCH_HAS_BARRIERS if CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
 	help
@@ -574,7 +599,7 @@ config ARCH_TEGRA
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
 	select CPU_ARM926T
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for Philips PNX4008 mobile platform.
@@ -584,9 +609,10 @@ config ARCH_PXA
 	depends on MMU
 	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
+	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
@@ -606,9 +632,15 @@ config ARCH_MSM
 	  (clock and power control, etc).
 
 config ARCH_SHMOBILE
-	bool "Renesas SH-Mobile"
+	bool "Renesas SH-Mobile / R-Mobile"
+	select HAVE_CLK
+	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
+	select NO_IOPORT
+	select SPARSE_IRQ
+	select MULTI_IRQ_HANDLER
 	help
-	  Support for Renesas's SH-Mobile ARM platforms
+	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
 
 config ARCH_RPC
 	bool "RiscPC"
@@ -635,6 +667,7 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
+	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -646,7 +679,7 @@ config ARCH_S3C2410
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_I2C if I2C
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -676,8 +709,8 @@ config ARCH_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S3C64XX series based systems
 
@@ -686,10 +719,10 @@ config ARCH_S5P64X0
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C_RTC
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -700,7 +733,7 @@ config ARCH_S5P6442
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5P6442 CPU based systems
 
@@ -711,9 +744,9 @@ config ARCH_S5PC100
 	select CPU_V7
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C_RTC
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PC100 series based systems
 
@@ -726,9 +759,9 @@ config ARCH_S5PV210
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C_RTC
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
@@ -739,9 +772,9 @@ config ARCH_S5PV310
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C_RTC
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PV310 series based systems
 
@@ -761,7 +794,7 @@ config ARCH_TCC_926
 	bool "Telechips TCC ARM926-based systems"
 	select CPU_ARM926T
 	select HAVE_CLK
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Telechips TCC ARM926-based systems.
@@ -781,11 +814,12 @@ config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
 	select CPU_ARM926T
+	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select GENERIC_GPIO
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
@@ -795,8 +829,9 @@ config ARCH_U8500
 	select CPU_V7
 	select ARM_AMBA
 	select GENERIC_CLOCKEVENTS
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_HAS_CPUFREQ
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
@@ -805,7 +840,7 @@ config ARCH_NOMADIK
 	select ARM_AMBA
 	select ARM_VIC
 	select CPU_ARM926T
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	help
@@ -817,7 +852,7 @@ config ARCH_DAVINCI
 	select ARCH_REQUIRE_GPIOLIB
 	select ZONE_DMA
 	select HAVE_IDE
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select GENERIC_ALLOCATOR
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
@@ -829,6 +864,7 @@ config ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
+	select HAVE_SCHED_CLOCK
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
@@ -837,7 +873,7 @@ config PLAT_SPEAR
 	bool "ST SPEAr"
 	select ARM_AMBA
 	select ARCH_REQUIRE_GPIOLIB
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	help
@@ -902,6 +938,8 @@ source "arch/arm/mach-mv78xx0/Kconfig"
 
 source "arch/arm/plat-mxc/Kconfig"
 
+source "arch/arm/mach-mxs/Kconfig"
+
 source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-nomadik/Kconfig"
@@ -982,9 +1020,11 @@ config ARCH_ACORN
 config PLAT_IOP
 	bool
 	select GENERIC_CLOCKEVENTS
+	select HAVE_SCHED_CLOCK
 
 config PLAT_ORION
 	bool
+	select HAVE_SCHED_CLOCK
 
 config PLAT_PXA
 	bool
@@ -999,8 +1039,8 @@ source arch/arm/mm/Kconfig
 
 config IWMMXT
 	bool "Enable iWMMXt support"
-	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK
-	default y if PXA27x || PXA3xx || ARCH_MMP
+	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
+	default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -1017,6 +1057,11 @@ config CPU_HAS_PMU
 	default y
 	bool
 
+config MULTI_IRQ_HANDLER
+	bool
+	help
+	  Allow each machine to specify it's own IRQ handler at run time.
+
 if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
@@ -1164,7 +1209,7 @@ config ISA_DMA_API
 	bool
 
 config PCI
-	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX
+	bool "PCI support" if MIGHT_HAVE_PCI
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -1175,6 +1220,12 @@ config PCI_DOMAINS
 	bool
 	depends on PCI
 
+config PCI_NANOENGINE
+	bool "BSE nanoEngine PCI support"
+	depends on SA1100_NANOENGINE
+	help
+	  Enable PCI on the BSE nanoEngine board.
+
 config PCI_SYSCALL
 	def_bool PCI
 
@@ -1205,10 +1256,11 @@ config SMP
 	depends on EXPERIMENTAL
 	depends on GENERIC_CLOCKEVENTS
 	depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
-		 ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
+		 ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
+		 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU
+	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1229,7 +1281,7 @@ config SMP
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
-	depends on SMP && !XIP && !THUMB2_KERNEL
+	depends on SMP && !XIP
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
@@ -1248,6 +1300,7 @@ config HAVE_ARM_SCU
 config HAVE_ARM_TWD
 	bool
 	depends on SMP
+	select TICK_ONESHOT
 	help
 	  This options enables support for the ARM timer and watchdog unit
 
@@ -1283,6 +1336,7 @@ config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
 	depends on SMP && HOTPLUG && EXPERIMENTAL
+	depends on !ARCH_MSM
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
@@ -1291,7 +1345,7 @@ config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP
 	default y
-	select HAVE_ARM_TWD
+	select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1310,8 +1364,8 @@ config HZ
 	default 100
 
 config THUMB2_KERNEL
-	bool "Compile the kernel in Thumb-2 mode"
-	depends on CPU_V7 && EXPERIMENTAL
+	bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
+	depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
 	select AEABI
 	select ARM_ASM_UNIFIED
 	help
@@ -1524,6 +1578,7 @@ config SECCOMP
 
 config CC_STACKPROTECTOR
 	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
 	help
 	  This option turns on the -fstack-protector GCC feature. This
 	  feature puts, at the beginning of functions, a canary value on
@@ -1650,6 +1705,19 @@ config ATAGS_PROC
 	  Should the atags used to boot the kernel be exported in an "atags"
 	  file in procfs. Useful with kexec.
 
+config CRASH_DUMP
+	bool "Build kdump crash kernel (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  Generate crash dump after being started by kexec. This should
+	  be normally only set in special crash dump kernels which are
+	  loaded in the main kernel with kexec-tools into a specially
+	  reserved region and then later executed after a crash by
+	  kdump/kexec. The crash dump kernel must be compiled to a
+	  memory address not used by the main kernel
+
+	  For more details see Documentation/kdump/kdump.txt
+
 config AUTO_ZRELADDR
 	bool "Auto calculation of the decompressed kernel image address"
 	depends on !ZBOOT_ROM && !ARCH_U300
@@ -1707,7 +1775,7 @@ config CPU_FREQ_S3C
 	  Internal configuration node for common cpufreq on Samsung SoC
 
 config CPU_FREQ_S3C24XX
-	bool "CPUfreq driver for Samsung S3C24XX series CPUs"
+	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
 	depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
 	select CPU_FREQ_S3C
 	help
@@ -1719,7 +1787,7 @@ config CPU_FREQ_S3C24XX
 	  If in doubt, say N.
 
 config CPU_FREQ_S3C24XX_PLL
-	bool "Support CPUfreq changing of PLL frequency"
+	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
 	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
 	help
 	  Compile in support for changing the PLL frequency from the
@@ -1759,7 +1827,7 @@ comment "At least one emulation must be selected"
 
 config FPE_NWFPE
 	bool "NWFPE math emulation"
-	depends on !AEABI || OABI_COMPAT
+	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
 	---help---
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 2fd0b99afc4..494224a9b45 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -23,7 +23,7 @@ config STRICT_DEVMEM
 config FRAME_POINTER
 	bool
 	depends on !THUMB2_KERNEL
-	default y if !ARM_UNWIND
+	default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
 	help
 	  If you say N here, the resulting kernel will be slightly smaller and
 	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
@@ -31,7 +31,7 @@ config FRAME_POINTER
 	  reported is severely limited.
 
 config ARM_UNWIND
-	bool "Enable stack unwinding support"
+	bool "Enable stack unwinding support (EXPERIMENTAL)"
 	depends on AEABI && EXPERIMENTAL
 	default y
 	help
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b87aed028ee..c22c1adfedd 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -154,10 +154,11 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_MX1)		:= imx
 machine-$(CONFIG_ARCH_MX2)		:= imx
-machine-$(CONFIG_ARCH_MX25)		:= mx25
+machine-$(CONFIG_ARCH_MX25)		:= imx
 machine-$(CONFIG_ARCH_MX3)		:= mx3
 machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
+machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 4a590f4113e..4d26f2c52a7 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -70,12 +70,7 @@ else
 $(obj)/uImage: LOADADDR=$(ZRELADDR)
 endif
 
-ifeq ($(CONFIG_THUMB2_KERNEL),y)
-# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
-$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
-else
 $(obj)/uImage: STARTADDR=$(LOADADDR)
-endif
 
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index 8b0de41c3dc..78b50807516 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -73,6 +73,8 @@ move:		ldmia	r4!, {r7 - r10}		@ move 32-bytes at a time
 
 		.size	_start, . - _start
 
+		.align
+
 		.type	data,#object
 data:		.word	initrd_start		@ source initrd address
 		.word	initrd_phys		@ destination initrd address
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 65a7c1c588a..0a8f748e506 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -45,6 +45,10 @@ else
 endif
 endif
 
+ifeq ($(CONFIG_ARCH_SHMOBILE),y)
+OBJS		+= head-shmobile.o
+endif
+
 #
 # We now have a PIC decompressor implementation.  Decompressors running
 # from RAM should not define ZTEXTADDR.  Decompressors running directly
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
new file mode 100644
index 00000000000..30973b76e6a
--- /dev/null
+++ b/arch/arm/boot/compressed/head-shmobile.S
@@ -0,0 +1,53 @@
+/*
+ * The head-file for SH-Mobile ARM platforms
+ *
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ * Simon Horman <horms@verge.net.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifdef CONFIG_ZBOOT_ROM
+
+	.section	".start", "ax"
+
+	/* load board-specific initialization code */
+#include <mach/zboot.h>
+
+	b	1f
+__atags:@ tag #1
+	.long	12			@ tag->hdr.size = tag_size(tag_core);
+	.long	0x54410001		@ tag->hdr.tag = ATAG_CORE;
+	.long   0			@ tag->u.core.flags = 0;
+	.long	0			@ tag->u.core.pagesize = 0;
+	.long	0			@ tag->u.core.rootdev = 0;
+	@ tag #2
+	.long	8			@ tag->hdr.size = tag_size(tag_mem32);
+	.long	0x54410002		@ tag->hdr.tag = ATAG_MEM;
+	.long	CONFIG_MEMORY_SIZE	@ tag->u.mem.size = CONFIG_MEMORY_SIZE;
+	.long	CONFIG_MEMORY_START	@ @ tag->u.mem.start = CONFIG_MEMORY_START;
+	@ tag #3
+	.long	0			@ tag->hdr.size = 0
+	.long	0			@ tag->hdr.tag = ATAG_NONE;
+1:
+
+	/* Set board ID necessary for boot */
+	ldr	r7, 1f				@ Set machine type register
+	adr	r8, __atags			@ Set atag register
+	b	2f
+
+1 :	.long MACH_TYPE
+2 :
+
+#endif /* CONFIG_ZBOOT_ROM */
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 6825c34646d..7193884ed8b 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -125,9 +125,13 @@ wait:		mrc	p14, 0, pc, c0, c1, 0
  * sort out different calling conventions
  */
 		.align
+		.arm				@ Always enter in ARM state
 start:
 		.type	start,#function
-		.rept	8
+ THUMB(		adr	r12, BSYM(1f)	)
+ THUMB(		bx	r12		)
+ THUMB(		.rept	6		)
+ ARM(		.rept	8		)
 		mov	r0, r0
 		.endr
 
@@ -135,6 +139,7 @@ start:
 		.word	0x016f2818		@ Magic numbers to help the loader
 		.word	start			@ absolute load/run zImage address
 		.word	_edata			@ zImage end address
+ THUMB(		.thumb			)
 1:		mov	r7, r1			@ save architecture ID
 		mov	r8, r2			@ save atags pointer
 
@@ -174,7 +179,8 @@ not_angel:
 		ldr	sp, [r0, #28]
 #ifdef CONFIG_AUTO_ZRELADDR
 		@ determine final kernel image address
-		and	r4, pc, #0xf8000000
+		mov	r4, pc
+		and	r4, r4, #0xf8000000
 		add	r4, r4, #TEXT_OFFSET
 #else
 		ldr	r4, =zreladdr
@@ -445,7 +451,8 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
  */
 		mov	r1, #0x1e
 		orr	r1, r1, #3 << 10
-		mov	r2, pc, lsr #20
+		mov	r2, pc
+		mov	r2, r2, lsr #20
 		orr	r1, r1, r2, lsl #20
 		add	r0, r3, r2, lsl #2
 		str	r1, [r0], #4
@@ -1084,6 +1091,6 @@ memdump:	mov	r12, r0
 reloc_end:
 
 		.align
-		.section ".stack", "w"
+		.section ".stack", "aw", %nobits
 user_stack:	.space	4096
 user_stack_end:
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index d08168941bd..366a924019a 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -57,7 +57,7 @@ SECTIONS
   .bss			: { *(.bss) }
   _end = .;
 
-  .stack (NOLOAD)	: { *(.stack) }
+  .stack		: { *(.stack) }
 
   .stab 0		: { *(.stab) }
   .stabstr 0		: { *(.stabstr) }
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 0a34c818692..778655f0257 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -37,7 +37,3 @@ config SHARP_PARAM
 
 config SHARP_SCOOP
 	bool
-
-config COMMON_CLKDEV
-	bool
-	select HAVE_CLK
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index e6e8664a941..e7521bca2c3 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_ARCH_IXP2000)	+= uengine.o
 obj-$(CONFIG_ARCH_IXP23XX)	+= uengine.o
 obj-$(CONFIG_PCI_HOST_ITE8152)  += it8152.o
 obj-$(CONFIG_COMMON_CLKDEV)	+= clkdev.o
+obj-$(CONFIG_ARM_TIMER_SP804)	+= timer-sp.o
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index cc0a932bbea..e5681636626 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -328,7 +328,7 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
  * substitute the safe buffer for the unsafe one.
  * (basically move the buffer from an unsafe area to a safe one)
  */
-dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+dma_addr_t __dma_map_single(struct device *dev, void *ptr, size_t size,
 		enum dma_data_direction dir)
 {
 	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
@@ -338,7 +338,7 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 
 	return map_single(dev, ptr, size, dir);
 }
-EXPORT_SYMBOL(dma_map_single);
+EXPORT_SYMBOL(__dma_map_single);
 
 /*
  * see if a mapped address was really a "safe" buffer and if so, copy
@@ -346,7 +346,7 @@ EXPORT_SYMBOL(dma_map_single);
  * the safe buffer.  (basically return things back to the way they
  * should be)
  */
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+void __dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		enum dma_data_direction dir)
 {
 	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
@@ -354,9 +354,9 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 
 	unmap_single(dev, dma_addr, size, dir);
 }
-EXPORT_SYMBOL(dma_unmap_single);
+EXPORT_SYMBOL(__dma_unmap_single);
 
-dma_addr_t dma_map_page(struct device *dev, struct page *page,
+dma_addr_t __dma_map_page(struct device *dev, struct page *page,
 		unsigned long offset, size_t size, enum dma_data_direction dir)
 {
 	dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n",
@@ -372,7 +372,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
 
 	return map_single(dev, page_address(page) + offset, size, dir);
 }
-EXPORT_SYMBOL(dma_map_page);
+EXPORT_SYMBOL(__dma_map_page);
 
 /*
  * see if a mapped address was really a "safe" buffer and if so, copy
@@ -380,7 +380,7 @@ EXPORT_SYMBOL(dma_map_page);
  * the safe buffer.  (basically return things back to the way they
  * should be)
  */
-void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
+void __dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
 		enum dma_data_direction dir)
 {
 	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
@@ -388,7 +388,7 @@ void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
 
 	unmap_single(dev, dma_addr, size, dir);
 }
-EXPORT_SYMBOL(dma_unmap_page);
+EXPORT_SYMBOL(__dma_unmap_page);
 
 int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 		unsigned long off, size_t sz, enum dma_data_direction dir)
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index ada6359160e..0b89ef00133 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -35,6 +35,9 @@
 
 static DEFINE_SPINLOCK(irq_controller_lock);
 
+/* Address of GIC 0 CPU interface */
+void __iomem *gic_cpu_base_addr __read_mostly;
+
 struct gic_chip_data {
 	unsigned int irq_offset;
 	void __iomem *dist_base;
@@ -45,7 +48,7 @@ struct gic_chip_data {
 #define MAX_GIC_NR	1
 #endif
 
-static struct gic_chip_data gic_data[MAX_GIC_NR];
+static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
 
 static inline void __iomem *gic_dist_base(unsigned int irq)
 {
@@ -146,9 +149,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 	unsigned int shift = (irq % 4) * 8;
 	unsigned int cpu = cpumask_first(mask_val);
 	u32 val;
+	struct irq_desc *desc;
 
 	spin_lock(&irq_controller_lock);
-	irq_desc[irq].node = cpu;
+	desc = irq_to_desc(irq);
+	if (desc == NULL) {
+		spin_unlock(&irq_controller_lock);
+		return -EINVAL;
+	}
+	desc->node = cpu;
 	val = readl(reg) & ~(0xff << shift);
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
@@ -207,67 +216,65 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
 	set_irq_chained_handler(irq, gic_handle_cascade_irq);
 }
 
-void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
-			  unsigned int irq_start)
+static void __init gic_dist_init(struct gic_chip_data *gic,
+	unsigned int irq_start)
 {
-	unsigned int max_irq, i;
+	unsigned int gic_irqs, irq_limit, i;
+	void __iomem *base = gic->dist_base;
 	u32 cpumask = 1 << smp_processor_id();
 
-	if (gic_nr >= MAX_GIC_NR)
-		BUG();
-
 	cpumask |= cpumask << 8;
 	cpumask |= cpumask << 16;
 
-	gic_data[gic_nr].dist_base = base;
-	gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31;
-
 	writel(0, base + GIC_DIST_CTRL);
 
 	/*
 	 * Find out how many interrupts are supported.
-	 */
-	max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
-	max_irq = (max_irq + 1) * 32;
-
-	/*
 	 * The GIC only supports up to 1020 interrupt sources.
-	 * Limit this to either the architected maximum, or the
-	 * platform maximum.
 	 */
-	if (max_irq > max(1020, NR_IRQS))
-		max_irq = max(1020, NR_IRQS);
+	gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
+	gic_irqs = (gic_irqs + 1) * 32;
+	if (gic_irqs > 1020)
+		gic_irqs = 1020;
 
 	/*
 	 * Set all global interrupts to be level triggered, active low.
 	 */
-	for (i = 32; i < max_irq; i += 16)
+	for (i = 32; i < gic_irqs; i += 16)
 		writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
 
 	/*
 	 * Set all global interrupts to this CPU only.
 	 */
-	for (i = 32; i < max_irq; i += 4)
+	for (i = 32; i < gic_irqs; i += 4)
 		writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
 	/*
-	 * Set priority on all interrupts.
+	 * Set priority on all global interrupts.
 	 */
-	for (i = 0; i < max_irq; i += 4)
+	for (i = 32; i < gic_irqs; i += 4)
 		writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
 
 	/*
-	 * Disable all interrupts.
+	 * Disable all interrupts.  Leave the PPI and SGIs alone
+	 * as these enables are banked registers.
 	 */
-	for (i = 0; i < max_irq; i += 32)
+	for (i = 32; i < gic_irqs; i += 32)
 		writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
 
 	/*
+	 * Limit number of interrupts registered to the platform maximum
+	 */
+	irq_limit = gic->irq_offset + gic_irqs;
+	if (WARN_ON(irq_limit > NR_IRQS))
+		irq_limit = NR_IRQS;
+
+	/*
 	 * Setup the Linux IRQ subsystem.
 	 */
-	for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
+	for (i = irq_start; i < irq_limit; i++) {
 		set_irq_chip(i, &gic_chip);
-		set_irq_chip_data(i, &gic_data[gic_nr]);
+		set_irq_chip_data(i, gic);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
@@ -275,17 +282,65 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 	writel(1, base + GIC_DIST_CTRL);
 }
 
-void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
+static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 {
-	if (gic_nr >= MAX_GIC_NR)
-		BUG();
+	void __iomem *dist_base = gic->dist_base;
+	void __iomem *base = gic->cpu_base;
+	int i;
 
-	gic_data[gic_nr].cpu_base = base;
+	/*
+	 * Deal with the banked PPI and SGI interrupts - disable all
+	 * PPI interrupts, ensure all SGI interrupts are enabled.
+	 */
+	writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+	writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+	/*
+	 * Set priority on PPI and SGI interrupts
+	 */
+	for (i = 0; i < 32; i += 4)
+		writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
 
 	writel(0xf0, base + GIC_CPU_PRIMASK);
 	writel(1, base + GIC_CPU_CTRL);
 }
 
+void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
+	void __iomem *dist_base, void __iomem *cpu_base)
+{
+	struct gic_chip_data *gic;
+
+	BUG_ON(gic_nr >= MAX_GIC_NR);
+
+	gic = &gic_data[gic_nr];
+	gic->dist_base = dist_base;
+	gic->cpu_base = cpu_base;
+	gic->irq_offset = (irq_start - 1) & ~31;
+
+	if (gic_nr == 0)
+		gic_cpu_base_addr = cpu_base;
+
+	gic_dist_init(gic, irq_start);
+	gic_cpu_init(gic);
+}
+
+void __cpuinit gic_secondary_init(unsigned int gic_nr)
+{
+	BUG_ON(gic_nr >= MAX_GIC_NR);
+
+	gic_cpu_init(&gic_data[gic_nr]);
+}
+
+void __cpuinit gic_enable_ppi(unsigned int irq)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	irq_to_desc(irq)->status |= IRQ_NOPROBE;
+	gic_unmask_irq(irq);
+	local_irq_restore(flags);
+}
+
 #ifdef CONFIG_SMP
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 1bec96e8519..42ff90b46df 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -352,3 +352,4 @@ struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys)
 	return pci_scan_bus(nr, &it8152_ops, sys);
 }
 
+EXPORT_SYMBOL(dma_set_coherent_mask);
diff --git a/arch/arm/plat-versatile/timer-sp.c b/arch/arm/common/timer-sp.c
index fb0d1c29971..6ef3342153b 100644
--- a/arch/arm/plat-versatile/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/plat-versatile/timer-sp.c
+ *  linux/arch/arm/common/timer-sp.c
  *
  *  Copyright (C) 1999 - 2003 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
@@ -26,8 +26,6 @@
 
 #include <asm/hardware/arm_timer.h>
 
-#include <plat/timer-sp.h>
-
 /*
  * These timers are currently always setup to be clocked at 1MHz.
  */
@@ -46,7 +44,6 @@ static struct clocksource clocksource_sp804 = {
 	.rating		= 200,
 	.read		= sp804_read,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -63,8 +60,7 @@ void __init sp804_clocksource_init(void __iomem *base)
 	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
 		clksrc_base + TIMER_CTRL);
 
-	cs->mult = clocksource_khz2mult(TIMER_FREQ_KHZ, cs->shift);
-	clocksource_register(cs);
+	clocksource_register_khz(cs, TIMER_FREQ_KHZ);
 }
 
 
diff --git a/arch/arm/configs/ag5evm_defconfig b/arch/arm/configs/ag5evm_defconfig
new file mode 100644
index 00000000000..2b9cf56db36
--- /dev/null
+++ b/arch/arm/configs/ag5evm_defconfig
@@ -0,0 +1,83 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SH73A0=y
+CONFIG_MACH_AG5EVM=y
+CONFIG_MEMORY_SIZE=0x10000000
+CONFIG_CPU_BPREDICT_DISABLE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_NO_HZ=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty0 console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_KEXEC=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_BLK_DEV is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_SPARSEKMAP=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=9
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_FTRACE is not set
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
deleted file mode 100644
index 75de45e949b..00000000000
--- a/arch/arm/configs/ams_delta_defconfig
+++ /dev/null
@@ -1,121 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_LBDAF is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_OMAP_MBOX_FWK=m
-CONFIG_MACH_AMS_DELTA=y
-CONFIG_OMAP_ARM_150MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-# CONFIG_SUSPEND is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IPV6=y
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AMS_DELTA=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_CATC=y
-CONFIG_USB_KAWETH=y
-CONFIG_USB_PEGASUS=y
-CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_6x11=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_AMS_DELTA=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_AMS_DELTA=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig
new file mode 100644
index 00000000000..38cb7c98542
--- /dev/null
+++ b/arch/arm/configs/at91rm9200_defconfig
@@ -0,0 +1,341 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_MACH_ONEARM=y
+CONFIG_ARCH_AT91RM9200DK=y
+CONFIG_MACH_AT91RM9200EK=y
+CONFIG_MACH_CSB337=y
+CONFIG_MACH_CSB637=y
+CONFIG_MACH_CARMEVA=y
+CONFIG_MACH_ATEB9200=y
+CONFIG_MACH_KB9200=y
+CONFIG_MACH_PICOTUX2XX=y
+CONFIG_MACH_KAFA=y
+CONFIG_MACH_ECBAT91=y
+CONFIG_MACH_YL9200=y
+CONFIG_MACH_CPUAT91=y
+CONFIG_MACH_ECO920=y
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+# CONFIG_ARM_THUMB is not set
+CONFIG_PCCARD=y
+CONFIG_AT91_CF=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x10000000
+CONFIG_ZBOOT_ROM_BSS=0x20040000
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_LEGACY=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_S1D13XXX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_MCT_U232=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_REISERFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_SMB_FS=m
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
deleted file mode 100644
index 4438e64f3bf..00000000000
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ /dev/null
@@ -1,72 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_ECO920=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
deleted file mode 100644
index ccd517c64bc..00000000000
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_AT91RM9200EK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_S1D13XXX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
deleted file mode 100644
index 1b0e9a1689b..00000000000
--- a/arch/arm/configs/ateb9200_defconfig
+++ /dev/null
@@ -1,131 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ATEB9200=y
-CONFIG_PCCARD=m
-CONFIG_AT91_CF=m
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC16=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
deleted file mode 100644
index ac64dbd8a49..00000000000
--- a/arch/arm/configs/carmeva_defconfig
+++ /dev/null
@@ -1,47 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CARMEVA=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
deleted file mode 100644
index 022aeb55b67..00000000000
--- a/arch/arm/configs/cpuat91_defconfig
+++ /dev/null
@@ -1,112 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CPUAT91=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
deleted file mode 100644
index a24c448840c..00000000000
--- a/arch/arm/configs/csb337_defconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB337=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
deleted file mode 100644
index 98552adac5f..00000000000
--- a/arch/arm/configs/csb637_defconfig
+++ /dev/null
@@ -1,98 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB637=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
deleted file mode 100644
index 6bb6abdcea8..00000000000
--- a/arch/arm/configs/ecbat91_defconfig
+++ /dev/null
@@ -1,99 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ECBAT91=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y
diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig
deleted file mode 100644
index edfa1c0daab..00000000000
--- a/arch/arm/configs/htcherald_defconfig
+++ /dev/null
@@ -1,73 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_ARCH_OMAP850=y
-# CONFIG_ARCH_OMAP15XX is not set
-CONFIG_MACH_HERALD=y
-CONFIG_OMAP_ARM_195MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-CONFIG_CPU_ARM925T=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=m
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-# CONFIG_USB_ETH_RNDIS is not set
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_OMAP=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_ZLIB=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
deleted file mode 100644
index 896dbe00dc6..00000000000
--- a/arch/arm/configs/kafa_defconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KAFA=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
deleted file mode 100644
index 9f906a85f5c..00000000000
--- a/arch/arm/configs/kb9202_defconfig
+++ /dev/null
@@ -1,127 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KB9200=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x10000000
-CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
diff --git a/arch/arm/configs/mackerel_defconfig b/arch/arm/configs/mackerel_defconfig
new file mode 100644
index 00000000000..306a2e2d362
--- /dev/null
+++ b/arch/arm/configs/mackerel_defconfig
@@ -0,0 +1,138 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_SH7372=y
+CONFIG_MACH_MACKEREL=y
+CONFIG_MEMORY_SIZE=0x10000000
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_FORCE_MAX_ZONEORDER=15
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 earlyprintk=sh-sci.0,115200 root=/dev/nfs nfsroot=,tcp,v3 ip=dhcp memchunk.vpu=64m memchunk.veu0=8m memchunk.spu0=2m mem=240m"
+CONFIG_KEXEC=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM=y
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index f0c339fd5d2..e648ea3429b 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -84,6 +84,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_IMX=y
+CONFIG_SPI=y
 CONFIG_W1=y
 CONFIG_W1_MASTER_MXC=y
 CONFIG_W1_SLAVE_THERM=y
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
deleted file mode 100644
index 993e94df5d0..00000000000
--- a/arch/arm/configs/n770_defconfig
+++ /dev/null
@@ -1,138 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MBOX_FWK=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_ARCH_OMAP15XX is not set
-CONFIG_ARCH_OMAP16XX=y
-CONFIG_MACH_NOKIA770=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-CONFIG_OMAP_ARM_216MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_HIDP=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=y
-# CONFIG_PROC_EVENTS is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=y
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_PPP=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP_UWIRE=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_OMAP=y
-CONFIG_FB_OMAP_LCDC_EXTERNAL=y
-CONFIG_FB_OMAP_LCDC_HWA742=y
-CONFIG_FB_OMAP_MANUAL_UPDATE=y
-CONFIG_FB_OMAP_LCD_MIPID=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_DUMMY=y
-CONFIG_SND_USB_AUDIO=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_FILE_STORAGE_TEST=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_SECURITY=y
diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig
new file mode 100644
index 00000000000..a350cc6bfe6
--- /dev/null
+++ b/arch/arm/configs/omap1_defconfig
@@ -0,0 +1,286 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_SHMEM is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_OMAP=y
+CONFIG_ARCH_OMAP1=y
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MBOX_FWK=y
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_ARCH_OMAP730=y
+CONFIG_ARCH_OMAP850=y
+CONFIG_ARCH_OMAP16XX=y
+CONFIG_MACH_OMAP_INNOVATOR=y
+CONFIG_MACH_OMAP_H2=y
+CONFIG_MACH_OMAP_H3=y
+CONFIG_MACH_OMAP_HTCWIZARD=y
+CONFIG_MACH_HERALD=y
+CONFIG_MACH_OMAP_OSK=y
+CONFIG_MACH_OMAP_PERSEUS2=y
+CONFIG_MACH_OMAP_FSAMPLE=y
+CONFIG_MACH_VOICEBLUE=y
+CONFIG_MACH_OMAP_PALMTE=y
+CONFIG_MACH_OMAP_PALMZ71=y
+CONFIG_MACH_OMAP_PALMTT=y
+CONFIG_MACH_SX1=y
+CONFIG_MACH_NOKIA770=y
+CONFIG_MACH_AMS_DELTA=y
+CONFIG_MACH_OMAP_GENERIC=y
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+CONFIG_OMAP_ARM_216MHZ=y
+CONFIG_OMAP_ARM_195MHZ=y
+CONFIG_OMAP_ARM_192MHZ=y
+CONFIG_OMAP_ARM_182MHZ=y
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_ARM_THUMB is not set
+CONFIG_PCCARD=y
+CONFIG_OMAP_CF=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2"
+CONFIG_FPE_NWFPE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_NETFILTER=y
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_HIDP=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_NAND=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_IDE=m
+CONFIG_BLK_DEV_IDECS=m
+CONFIG_SCSI=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_TUN=y
+CONFIG_PHYLIB=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_OMAP_UWIRE=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_VIRTUAL=y
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCDC_EXTERNAL=y
+CONFIG_FB_OMAP_LCDC_HWA742=y
+CONFIG_FB_OMAP_MANUAL_UPDATE=y
+CONFIG_FB_OMAP_LCD_MIPID=y
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+CONFIG_SND_DUMMY=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_TEST=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+# CONFIG_USB_ETH_RNDIS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_OMAP=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_CRAMFS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
deleted file mode 100644
index 0e42ba4ede9..00000000000
--- a/arch/arm/configs/omap_generic_1510_defconfig
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
deleted file mode 100644
index 5e536cf0f9f..00000000000
--- a/arch/arm/configs/omap_generic_1610_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP15XX is not set
-CONFIG_ARCH_OMAP16XX=y
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig
deleted file mode 100644
index c0867b1d981..00000000000
--- a/arch/arm/configs/omap_generic_1710_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-# CONFIG_OMAP_MUX is not set
-# CONFIG_ARCH_OMAP15XX is not set
-CONFIG_ARCH_OMAP16XX=y
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
-CONFIG_FPE_NWFPE=y
-CONFIG_ARTHUR=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_BELKIN is not set
-# CONFIG_USB_ARMLINUX is not set
-CONFIG_PPP=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_PCBC=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
deleted file mode 100644
index e2de2aa17e6..00000000000
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ /dev/null
@@ -1,109 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_DM_TIMER=y
-# CONFIG_ARCH_OMAP15XX is not set
-CONFIG_ARCH_OMAP16XX=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEBUG_DRIVER=y
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_PPP=y
-CONFIG_SLIP=y
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_I2C_OMAP=y
-CONFIG_SPI=y
-CONFIG_SPI_OMAP_UWIRE=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_TEST=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
deleted file mode 100644
index 265af2669ed..00000000000
--- a/arch/arm/configs/omap_innovator_1510_defconfig
+++ /dev/null
@@ -1,102 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_USB_RTL8150=y
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_CDC_SUBSET is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig
deleted file mode 100644
index cc7fbf84ddd..00000000000
--- a/arch/arm/configs/omap_innovator_1610_defconfig
+++ /dev/null
@@ -1,58 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-# CONFIG_ARCH_OMAP15XX is not set
-CONFIG_ARCH_OMAP16XX=y
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
deleted file mode 100644
index 9105de7661f..00000000000
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ /dev/null
@@ -1,87 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_32K_TIMER=y
-# CONFIG_ARCH_OMAP15XX is not set
-CONFIG_ARCH_OMAP16XX=y
-CONFIG_MACH_OMAP_OSK=y
-CONFIG_OMAP_ARM_192MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_OMAP_CF=y
-CONFIG_NO_HZ=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig
deleted file mode 100644
index aa777e624e2..00000000000
--- a/arch/arm/configs/omap_perseus2_730_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_ARCH_OMAP730=y
-# CONFIG_ARCH_OMAP15XX is not set
-CONFIG_MACH_OMAP_PERSEUS2=y
-CONFIG_OMAP_ARM_182MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMC91X=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_VIRTUAL=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
deleted file mode 100644
index 1579857aeea..00000000000
--- a/arch/arm/configs/onearm_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ONEARM=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig
deleted file mode 100644
index 828d7cb9e66..00000000000
--- a/arch/arm/configs/palmte_defconfig
+++ /dev/null
@@ -1,48 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_MACH_OMAP_PALMTE=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_OMAP=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=850
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_CRC_CCITT=y
diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig
deleted file mode 100644
index 31d02c48a3d..00000000000
--- a/arch/arm/configs/palmtt_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_MACH_OMAP_PALMTT=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SPI=y
-CONFIG_SPI_OMAP_UWIRE=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
deleted file mode 100644
index c478db6f519..00000000000
--- a/arch/arm/configs/palmz71_defconfig
+++ /dev/null
@@ -1,53 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-z71"
-CONFIG_SYSVIPC=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_MACH_OMAP_PALMZ71=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SPI=y
-CONFIG_SPI_OMAP_UWIRE=y
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_OMAP=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_EXT2_FS=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
deleted file mode 100644
index 4c9afa478d5..00000000000
--- a/arch/arm/configs/picotux200_defconfig
+++ /dev/null
@@ -1,242 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_PICOTUX2XX=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=m
-CONFIG_HID=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_MMC=m
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_AT91RM9200=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_NLS_DEFAULT="utf-8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_LIBCRC32C=m
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
deleted file mode 100644
index 20a861877a3..00000000000
--- a/arch/arm/configs/sx1_defconfig
+++ /dev/null
@@ -1,110 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_IKCONFIG=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_SHMEM is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLOB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP1=y
-CONFIG_OMAP_MBOX_FWK=y
-CONFIG_MACH_SX1=y
-CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_CONNECTOR=y
-# CONFIG_PROC_EVENTS is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_COUNT=2
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_OMAP=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-# CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FB_OMAP=y
-CONFIG_FB_OMAP_BOOTLOADER_INIT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_OMAP=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=866
-CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_UTF8=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
deleted file mode 100644
index 30c537f6108..00000000000
--- a/arch/arm/configs/yl9200_defconfig
+++ /dev/null
@@ -1,137 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_YL9200=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=3
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_ATMEL=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SLUB_DEBUG_ON=y
-CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 062b58c029a..bc2d2d75f70 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -18,6 +18,7 @@
 #endif
 
 #include <asm/ptrace.h>
+#include <asm/domain.h>
 
 /*
  * Endian independent macros for shifting bytes within registers.
@@ -157,16 +158,24 @@
 #ifdef CONFIG_SMP
 #define ALT_SMP(instr...)					\
 9998:	instr
+/*
+ * Note: if you get assembler errors from ALT_UP() when building with
+ * CONFIG_THUMB2_KERNEL, you almost certainly need to use
+ * ALT_SMP( W(instr) ... )
+ */
 #define ALT_UP(instr...)					\
 	.pushsection ".alt.smp.init", "a"			;\
 	.long	9998b						;\
-	instr							;\
+9997:	instr							;\
+	.if . - 9997b != 4					;\
+		.error "ALT_UP() content must assemble to exactly 4 bytes";\
+	.endif							;\
 	.popsection
 #define ALT_UP_B(label)					\
 	.equ	up_b_offset, label - 9998b			;\
 	.pushsection ".alt.smp.init", "a"			;\
 	.long	9998b						;\
-	b	. + up_b_offset					;\
+	W(b)	. + up_b_offset					;\
 	.popsection
 #else
 #define ALT_SMP(instr...)
@@ -177,16 +186,24 @@
 /*
  * SMP data memory barrier
  */
-	.macro	smp_dmb
+	.macro	smp_dmb mode
 #ifdef CONFIG_SMP
 #if __LINUX_ARM_ARCH__ >= 7
+	.ifeqs "\mode","arm"
 	ALT_SMP(dmb)
+	.else
+	ALT_SMP(W(dmb))
+	.endif
 #elif __LINUX_ARM_ARCH__ == 6
 	ALT_SMP(mcr	p15, 0, r0, c7, c10, 5)	@ dmb
 #else
 #error Incompatible SMP platform
 #endif
+	.ifeqs "\mode","arm"
 	ALT_UP(nop)
+	.else
+	ALT_UP(W(nop))
+	.endif
 #endif
 	.endm
 
@@ -206,12 +223,12 @@
  */
 #ifdef CONFIG_THUMB2_KERNEL
 
-	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()
 9999:
 	.if	\inc == 1
-	\instr\cond\()bt \reg, [\ptr, #\off]
+	\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
 	.elseif	\inc == 4
-	\instr\cond\()t \reg, [\ptr, #\off]
+	\instr\cond\()\t\().w \reg, [\ptr, #\off]
 	.else
 	.error	"Unsupported inc macro argument"
 	.endif
@@ -238,7 +255,7 @@
 	@ Slightly optimised to avoid incrementing the pointer twice
 	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort
 	.if	\rept == 2
-	usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort
+	usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort
 	.endif
 
 	add\cond \ptr, #\rept * \inc
@@ -246,13 +263,13 @@
 
 #else	/* !CONFIG_THUMB2_KERNEL */
 
-	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()
 	.rept	\rept
 9999:
 	.if	\inc == 1
-	\instr\cond\()bt \reg, [\ptr], #\inc
+	\instr\cond\()b\()\t \reg, [\ptr], #\inc
 	.elseif	\inc == 4
-	\instr\cond\()t \reg, [\ptr], #\inc
+	\instr\cond\()\t \reg, [\ptr], #\inc
 	.else
 	.error	"Unsupported inc macro argument"
 	.endif
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index 9d6122096fb..75fe66bc02b 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -23,4 +23,6 @@
 #define ARCH_SLAB_MINALIGN 8
 #endif
 
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
+
 #endif
diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h
index b56c1389b6f..765d3322236 100644
--- a/arch/arm/include/asm/clkdev.h
+++ b/arch/arm/include/asm/clkdev.h
@@ -12,23 +12,13 @@
 #ifndef __ASM_CLKDEV_H
 #define __ASM_CLKDEV_H
 
-struct clk;
-struct device;
+#include <linux/slab.h>
 
-struct clk_lookup {
-	struct list_head	node;
-	const char		*dev_id;
-	const char		*con_id;
-	struct clk		*clk;
-};
+#include <mach/clkdev.h>
 
-struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
-	const char *dev_fmt, ...);
-
-void clkdev_add(struct clk_lookup *cl);
-void clkdev_drop(struct clk_lookup *cl);
-
-void clkdev_add_table(struct clk_lookup *, size_t);
-int clk_add_alias(const char *, const char *, char *, struct device *);
+static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
+{
+	return kzalloc(size, GFP_KERNEL);
+}
 
 #endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index c568da7dcae..4fff837363e 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -5,24 +5,29 @@
 
 #include <linux/mm_types.h>
 #include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
 
 #include <asm-generic/dma-coherent.h>
 #include <asm/memory.h>
 
+#ifdef __arch_page_to_dma
+#error Please update to __arch_pfn_to_dma
+#endif
+
 /*
- * page_to_dma/dma_to_virt/virt_to_dma are architecture private functions
- * used internally by the DMA-mapping API to provide DMA addresses. They
- * must not be used by drivers.
+ * dma_to_pfn/pfn_to_dma/dma_to_virt/virt_to_dma are architecture private
+ * functions used internally by the DMA-mapping API to provide DMA
+ * addresses. They must not be used by drivers.
  */
-#ifndef __arch_page_to_dma
-static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+#ifndef __arch_pfn_to_dma
+static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
 {
-	return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
+	return (dma_addr_t)__pfn_to_bus(pfn);
 }
 
-static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
 {
-	return pfn_to_page(__bus_to_pfn(addr));
+	return __bus_to_pfn(addr);
 }
 
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
@@ -35,14 +40,14 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr)
 	return (dma_addr_t)__virt_to_bus((unsigned long)(addr));
 }
 #else
-static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn)
 {
-	return __arch_page_to_dma(dev, page);
+	return __arch_pfn_to_dma(dev, pfn);
 }
 
-static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr)
 {
-	return __arch_dma_to_page(dev, addr);
+	return __arch_dma_to_pfn(dev, addr);
 }
 
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
@@ -293,13 +298,13 @@ extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
 /*
  * The DMA API, implemented by dmabounce.c.  See below for descriptions.
  */
-extern dma_addr_t dma_map_single(struct device *, void *, size_t,
+extern dma_addr_t __dma_map_single(struct device *, void *, size_t,
 		enum dma_data_direction);
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+extern void __dma_unmap_single(struct device *, dma_addr_t, size_t,
 		enum dma_data_direction);
-extern dma_addr_t dma_map_page(struct device *, struct page *,
+extern dma_addr_t __dma_map_page(struct device *, struct page *,
 		unsigned long, size_t, enum dma_data_direction);
-extern void dma_unmap_page(struct device *, dma_addr_t, size_t,
+extern void __dma_unmap_page(struct device *, dma_addr_t, size_t,
 		enum dma_data_direction);
 
 /*
@@ -323,6 +328,34 @@ static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr,
 }
 
 
+static inline dma_addr_t __dma_map_single(struct device *dev, void *cpu_addr,
+		size_t size, enum dma_data_direction dir)
+{
+	__dma_single_cpu_to_dev(cpu_addr, size, dir);
+	return virt_to_dma(dev, cpu_addr);
+}
+
+static inline dma_addr_t __dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size, enum dma_data_direction dir)
+{
+	__dma_page_cpu_to_dev(page, offset, size, dir);
+	return pfn_to_dma(dev, page_to_pfn(page)) + offset;
+}
+
+static inline void __dma_unmap_single(struct device *dev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir)
+{
+	__dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
+}
+
+static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir)
+{
+	__dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)),
+		handle & ~PAGE_MASK, size, dir);
+}
+#endif /* CONFIG_DMABOUNCE */
+
 /**
  * dma_map_single - map a single buffer for streaming DMA
  * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
@@ -340,11 +373,16 @@ static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr,
 static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
 		size_t size, enum dma_data_direction dir)
 {
+	dma_addr_t addr;
+
 	BUG_ON(!valid_dma_direction(dir));
 
-	__dma_single_cpu_to_dev(cpu_addr, size, dir);
+	addr = __dma_map_single(dev, cpu_addr, size, dir);
+	debug_dma_map_page(dev, virt_to_page(cpu_addr),
+			(unsigned long)cpu_addr & ~PAGE_MASK, size,
+			dir, addr, true);
 
-	return virt_to_dma(dev, cpu_addr);
+	return addr;
 }
 
 /**
@@ -364,11 +402,14 @@ static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
 static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 	     unsigned long offset, size_t size, enum dma_data_direction dir)
 {
+	dma_addr_t addr;
+
 	BUG_ON(!valid_dma_direction(dir));
 
-	__dma_page_cpu_to_dev(page, offset, size, dir);
+	addr = __dma_map_page(dev, page, offset, size, dir);
+	debug_dma_map_page(dev, page, offset, size, dir, addr, false);
 
-	return page_to_dma(dev, page) + offset;
+	return addr;
 }
 
 /**
@@ -388,7 +429,8 @@ static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
 static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir)
 {
-	__dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
+	debug_dma_unmap_page(dev, handle, size, dir, true);
+	__dma_unmap_single(dev, handle, size, dir);
 }
 
 /**
@@ -408,10 +450,9 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir)
 {
-	__dma_page_dev_to_cpu(dma_to_page(dev, handle), handle & ~PAGE_MASK,
-		size, dir);
+	debug_dma_unmap_page(dev, handle, size, dir, false);
+	__dma_unmap_page(dev, handle, size, dir);
 }
-#endif /* CONFIG_DMABOUNCE */
 
 /**
  * dma_sync_single_range_for_cpu
@@ -437,6 +478,8 @@ static inline void dma_sync_single_range_for_cpu(struct device *dev,
 {
 	BUG_ON(!valid_dma_direction(dir));
 
+	debug_dma_sync_single_for_cpu(dev, handle + offset, size, dir);
+
 	if (!dmabounce_sync_for_cpu(dev, handle, offset, size, dir))
 		return;
 
@@ -449,6 +492,8 @@ static inline void dma_sync_single_range_for_device(struct device *dev,
 {
 	BUG_ON(!valid_dma_direction(dir));
 
+	debug_dma_sync_single_for_device(dev, handle + offset, size, dir);
+
 	if (!dmabounce_sync_for_device(dev, handle, offset, size, dir))
 		return;
 
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index cc7ef408071..af18ceaacf5 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -45,13 +45,17 @@
  */
 #define DOMAIN_NOACCESS	0
 #define DOMAIN_CLIENT	1
+#ifdef CONFIG_CPU_USE_DOMAINS
 #define DOMAIN_MANAGER	3
+#else
+#define DOMAIN_MANAGER	1
+#endif
 
 #define domain_val(dom,type)	((type) << (2*(dom)))
 
 #ifndef __ASSEMBLY__
 
-#ifdef CONFIG_MMU
+#ifdef CONFIG_CPU_USE_DOMAINS
 #define set_domain(x)					\
 	do {						\
 	__asm__ __volatile__(				\
@@ -74,5 +78,28 @@
 #define modify_domain(dom,type)	do { } while (0)
 #endif
 
+/*
+ * Generate the T (user) versions of the LDR/STR and related
+ * instructions (inline assembly)
+ */
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define T(instr)	#instr "t"
+#else
+#define T(instr)	#instr
 #endif
-#endif /* !__ASSEMBLY__ */
+
+#else /* __ASSEMBLY__ */
+
+/*
+ * Generate the T (user) versions of the LDR/STR and related
+ * instructions
+ */
+#ifdef CONFIG_CPU_USE_DOMAINS
+#define T(instr)	instr ## t
+#else
+#define T(instr)	instr
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* !__ASM_PROC_DOMAIN_H */
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 8bb66bca2e3..c3cd8755e64 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -99,6 +99,8 @@ struct elf32_hdr;
 extern int elf_check_arch(const struct elf32_hdr *);
 #define elf_check_arch elf_check_arch
 
+#define vmcore_elf64_check_arch(x) (0)
+
 extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
 #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
 
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
new file mode 100644
index 00000000000..ec0bbf79c71
--- /dev/null
+++ b/arch/arm/include/asm/entry-macro-multi.S
@@ -0,0 +1,44 @@
+/*
+ * Interrupt handling.  Preserves r7, r8, r9
+ */
+	.macro	arch_irq_handler_default
+	get_irqnr_preamble r5, lr
+1:	get_irqnr_and_base r0, r6, r5, lr
+	movne	r1, sp
+	@
+	@ routine called with r0 = irq number, r1 = struct pt_regs *
+	@
+	adrne	lr, BSYM(1b)
+	bne	asm_do_IRQ
+
+#ifdef CONFIG_SMP
+	/*
+	 * XXX
+	 *
+	 * this macro assumes that irqstat (r6) and base (r5) are
+	 * preserved from get_irqnr_and_base above
+	 */
+	ALT_SMP(test_for_ipi r0, r6, r5, lr)
+	ALT_UP_B(9997f)
+	movne	r1, sp
+	adrne	lr, BSYM(1b)
+	bne	do_IPI
+
+#ifdef CONFIG_LOCAL_TIMERS
+	test_for_ltirq r0, r6, r5, lr
+	movne	r0, sp
+	adrne	lr, BSYM(1b)
+	bne	do_local_timer
+#endif
+#endif
+9997:
+	.endm
+
+	.macro	arch_irq_handler, symbol_name
+	.align	5
+	.global \symbol_name
+\symbol_name:
+	mov	r4, lr
+	arch_irq_handler_default
+	mov     pc, r4
+	.endm
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 540a044153a..b33fe7065b3 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -13,12 +13,13 @@
 #include <linux/preempt.h>
 #include <linux/uaccess.h>
 #include <asm/errno.h>
+#include <asm/domain.h>
 
 #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	ldrt	%1, [%2]\n"				\
+	"1:	" T(ldr) "	%1, [%2]\n"			\
 	"	" insn "\n"					\
-	"2:	strt	%0, [%2]\n"				\
+	"2:	" T(str) "	%0, [%2]\n"			\
 	"	mov	%0, #0\n"				\
 	"3:\n"							\
 	"	.pushsection __ex_table,\"a\"\n"		\
@@ -97,10 +98,10 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
 	pagefault_disable();	/* implies preempt_disable() */
 
 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	ldrt	%0, [%3]\n"
+	"1:	" T(ldr) "	%0, [%3]\n"
 	"	teq	%0, %1\n"
 	"	it	eq	@ explicit IT needed for the 2b label\n"
-	"2:	streqt	%2, [%3]\n"
+	"2:	" T(streq) "	%2, [%3]\n"
 	"3:\n"
 	"	.pushsection __ex_table,\"a\"\n"
 	"	.align	3\n"
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 6d7485aff95..89ad1805e57 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -5,13 +5,31 @@
 #include <linux/threads.h>
 #include <asm/irq.h>
 
+#define NR_IPI	5
+
 typedef struct {
 	unsigned int __softirq_pending;
+#ifdef CONFIG_LOCAL_TIMERS
 	unsigned int local_timer_irqs;
+#endif
+#ifdef CONFIG_SMP
+	unsigned int ipi_irqs[NR_IPI];
+#endif
 } ____cacheline_aligned irq_cpustat_t;
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
 
+#define __inc_irq_stat(cpu, member)	__IRQ_STAT(cpu, member)++
+#define __get_irq_stat(cpu, member)	__IRQ_STAT(cpu, member)
+
+#ifdef CONFIG_SMP
+u64 smp_irq_stat_cpu(unsigned int cpu);
+#else
+#define smp_irq_stat_cpu(cpu)	0
+#endif
+
+#define arch_irq_stat_cpu	smp_irq_stat_cpu
+
 #if NR_IRQS > 512
 #define HARDIRQ_BITS	10
 #elif NR_IRQS > 256
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
index cc42d5fdee1..5aeec1e1735 100644
--- a/arch/arm/include/asm/hardware/cache-l2x0.h
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -59,7 +59,17 @@
 #define L2X0_CACHE_ID_PART_MASK		(0xf << 6)
 #define L2X0_CACHE_ID_PART_L210		(1 << 6)
 #define L2X0_CACHE_ID_PART_L310		(3 << 6)
-#define L2X0_AUX_CTRL_WAY_SIZE_MASK	(0x3 << 17)
+
+#define L2X0_AUX_CTRL_MASK			0xc0000fff
+#define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT	16
+#define L2X0_AUX_CTRL_WAY_SIZE_SHIFT		17
+#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x3 << 17)
+#define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT	22
+#define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT		26
+#define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT		27
+#define L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT	28
+#define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT	29
+#define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT		30
 
 #ifndef __ASSEMBLY__
 extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
new file mode 100644
index 00000000000..c115b82fe80
--- /dev/null
+++ b/arch/arm/include/asm/hardware/entry-macro-gic.S
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/include/asm/hardware/entry-macro-gic.S
+ *
+ * Low-level IRQ helper macros for GIC
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/hardware/gic.h>
+
+#ifndef HAVE_GET_IRQNR_PREAMBLE
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =gic_cpu_base_addr
+	ldr	\base, [\base]
+	.endm
+#endif
+
+/*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec.  To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local.  We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an interrupt if it's
+ * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+ *
+ * A simple read from the controller will tell us the number of the highest
+ * priority enabled interrupt.  We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+	/* bits 12-10 = src CPU, 9-0 = int # */
+
+	ldr	\tmp, =1021
+	bic     \irqnr, \irqstat, #0x1c00
+	cmp     \irqnr, #29
+	cmpcc	\irqnr, \irqnr
+	cmpne	\irqnr, \tmp
+	cmpcs	\irqnr, \irqnr
+	.endm
+
+/* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt on the
+ * controller, since this requires the original irqstat value which
+ * we won't easily be able to recreate later.
+ */
+
+	.macro test_for_ipi, irqnr, irqstat, base, tmp
+	bic	\irqnr, \irqstat, #0x1c00
+	cmp	\irqnr, #16
+	strcc	\irqstat, [\base, #GIC_CPU_EOI]
+	cmpcs	\irqnr, \irqnr
+	.endm
+
+/* As above, this assumes that irqstat and base are preserved.. */
+
+	.macro test_for_ltirq, irqnr, irqstat, base, tmp
+	bic	\irqnr, \irqstat, #0x1c00
+	mov 	\tmp, #0
+	cmp	\irqnr, #29
+	moveq	\tmp, #1
+	streq	\irqstat, [\base, #GIC_CPU_EOI]
+	cmp	\tmp, #0
+	.endm
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 7f34333bb54..84557d32100 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -33,10 +33,13 @@
 #define GIC_DIST_SOFTINT		0xf00
 
 #ifndef __ASSEMBLY__
-void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
-void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
+extern void __iomem *gic_cpu_base_addr;
+
+void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
+void gic_secondary_init(unsigned int);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
+void gic_enable_ppi(unsigned int);
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
index 6700c7fc7eb..b2f95c72287 100644
--- a/arch/arm/include/asm/hardware/it8152.h
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -75,7 +75,8 @@ extern unsigned long it8152_base_address;
   IT8152_PD_IRQ(1)  USB (USBR)
   IT8152_PD_IRQ(0)  Audio controller (ACR)
  */
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+#define IT8152_IRQ(x)   (IRQ_BOARD_START + (x))
+#define IT8152_LAST_IRQ	(IRQ_BOARD_START + 40)
 
 /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
 #define IT8152_LD_IRQ_COUNT     9
diff --git a/arch/arm/plat-versatile/include/plat/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h
index 21e75e30d49..21e75e30d49 100644
--- a/arch/arm/plat-versatile/include/plat/timer-sp.h
+++ b/arch/arm/include/asm/hardware/timer-sp.h
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index 1fc684e70ab..7080e2c8fa6 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -25,9 +25,6 @@ extern void *kmap_high(struct page *page);
 extern void *kmap_high_get(struct page *page);
 extern void kunmap_high(struct page *page);
 
-extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte);
-extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte);
-
 /*
  * The following functions are already defined by <linux/highmem.h>
  * when CONFIG_HIGHMEM is not set.
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index 4d8ae9d67ab..f389b2704d8 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -20,8 +20,8 @@ struct arch_hw_breakpoint_ctrl {
 struct arch_hw_breakpoint {
 	u32	address;
 	u32	trigger;
-	struct perf_event *suspended_wp;
-	struct arch_hw_breakpoint_ctrl ctrl;
+	struct	arch_hw_breakpoint_ctrl step_ctrl;
+	struct	arch_hw_breakpoint_ctrl ctrl;
 };
 
 static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 815efa2d4e0..20e0f7c9e03 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -241,18 +241,15 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
  *
  */
 #ifndef __arch_ioremap
-#define ioremap(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE)
-#define ioremap_nocache(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE)
-#define ioremap_cached(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE_CACHED)
-#define ioremap_wc(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE_WC)
-#define iounmap(cookie)			__iounmap(cookie)
-#else
+#define __arch_ioremap			__arm_ioremap
+#define __arch_iounmap			__iounmap
+#endif
+
 #define ioremap(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_nocache(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_cached(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
 #define ioremap_wc(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE_WC)
-#define iounmap(cookie)			__arch_iounmap(cookie)
-#endif
+#define iounmap				__arch_iounmap
 
 /*
  * io{read,write}{8,16,32} macros
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
index 8ec9ef5c3c7..c0094d8edae 100644
--- a/arch/arm/include/asm/kexec.h
+++ b/arch/arm/include/asm/kexec.h
@@ -33,10 +33,20 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
 	if (oldregs) {
 		memcpy(newregs, oldregs, sizeof(*newregs));
 	} else {
-		__asm__ __volatile__ ("stmia %0, {r0 - r15}"
-				      : : "r" (&newregs->ARM_r0));
-		__asm__ __volatile__ ("mrs %0, cpsr"
-				      : "=r" (newregs->ARM_cpsr));
+		__asm__ __volatile__ (
+			"stmia	%[regs_base], {r0-r12}\n\t"
+			"mov	%[_ARM_sp], sp\n\t"
+			"str	lr, %[_ARM_lr]\n\t"
+			"adr	%[_ARM_pc], 1f\n\t"
+			"mrs	%[_ARM_cpsr], cpsr\n\t"
+		"1:"
+			: [_ARM_pc] "=r" (newregs->ARM_pc),
+			  [_ARM_cpsr] "=r" (newregs->ARM_cpsr),
+			  [_ARM_sp] "=r" (newregs->ARM_sp),
+			  [_ARM_lr] "=o" (newregs->ARM_lr)
+			: [regs_base] "r" (&newregs->ARM_r0)
+			: "memory"
+		);
 	}
 }
 
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index 50c7e7cfd67..6bc63ab498c 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -30,7 +30,6 @@ asmlinkage void do_local_timer(struct pt_regs *);
 #include "smp_twd.h"
 
 #define local_timer_ack()	twd_timer_ack()
-#define local_timer_stop()	twd_timer_stop()
 
 #else
 
@@ -40,11 +39,6 @@ asmlinkage void do_local_timer(struct pt_regs *);
  */
 int local_timer_ack(void);
 
-/*
- * Stop a local timer interrupt.
- */
-void local_timer_stop(void);
-
 #endif
 
 /*
@@ -52,12 +46,6 @@ void local_timer_stop(void);
  */
 void local_timer_setup(struct clock_event_device *);
 
-#else
-
-static inline void local_timer_stop(void)
-{
-}
-
 #endif
 
 #endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index d97a964207f..3a0893a76a3 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -37,12 +37,21 @@ struct machine_desc {
 					 struct meminfo *);
 	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/
+	void			(*init_early)(void);
 	void			(*init_irq)(void);
 	struct sys_timer	*timer;		/* system tick timer	*/
 	void			(*init_machine)(void);
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+	void			(*handle_irq)(struct pt_regs *);
+#endif
 };
 
 /*
+ * Current machine - only accessible during boot.
+ */
+extern struct machine_desc *machine_desc;
+
+/*
  * Set of macros to define architecture features.  This is built into
  * a table by the linker.
  */
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index ce3eee9fe26..22ac140edd9 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -17,10 +17,12 @@ struct seq_file;
 /*
  * This is internal.  Do not use it.
  */
-extern unsigned int arch_nr_irqs;
-extern void (*init_arch_irq)(void);
 extern void init_FIQ(void);
-extern int show_fiq_list(struct seq_file *, void *);
+extern int show_fiq_list(struct seq_file *, int);
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+extern void (*handle_arch_irq)(struct pt_regs *);
+#endif
 
 /*
  * This is for easy migration, but should be changed in the source
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index 35d408f6dcc..883f6be5117 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -43,7 +43,6 @@ struct sys_timer {
 #endif
 };
 
-extern struct sys_timer *system_timer;
 extern void timer_tick(void);
 
 #endif
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 68870c77667..b4ffe9d5b52 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -13,6 +13,10 @@ typedef struct {
 
 #ifdef CONFIG_CPU_HAS_ASID
 #define ASID(mm)	((mm)->context.id & 255)
+
+/* init_mm.context.id_lock should be initialized. */
+#define INIT_MM_CONTEXT(name)                                                 \
+	.context.id_lock    = __SPIN_LOCK_UNLOCKED(name.context.id_lock),
 #else
 #define ASID(mm)	(0)
 #endif
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index cbb0bc295d2..12c8e680cbf 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -8,11 +8,6 @@
 struct unwind_table;
 
 #ifdef CONFIG_ARM_UNWIND
-struct arm_unwind_mapping {
-	Elf_Shdr *unw_sec;
-	Elf_Shdr *sec_text;
-	struct unwind_table *unwind;
-};
 enum {
 	ARM_SEC_INIT,
 	ARM_SEC_DEVINIT,
@@ -21,13 +16,13 @@ enum {
 	ARM_SEC_DEVEXIT,
 	ARM_SEC_MAX,
 };
+#endif
+
 struct mod_arch_specific {
-	struct arm_unwind_mapping map[ARM_SEC_MAX];
-};
-#else
-struct mod_arch_specific {
-};
+#ifdef CONFIG_ARM_UNWIND
+	struct unwind_table *unwind[ARM_SEC_MAX];
 #endif
+};
 
 /*
  * Include the ARM architecture version.
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index a485ac3c869..f51a69595f6 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -151,13 +151,15 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
 #define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
 
+typedef unsigned long pteval_t;
+
 #undef STRICT_MM_TYPECHECKS
 
 #ifdef STRICT_MM_TYPECHECKS
 /*
  * These are used to make use of C type-checking..
  */
-typedef struct { unsigned long pte; } pte_t;
+typedef struct { pteval_t pte; } pte_t;
 typedef struct { unsigned long pmd; } pmd_t;
 typedef struct { unsigned long pgd[2]; } pgd_t;
 typedef struct { unsigned long pgprot; } pgprot_t;
@@ -175,7 +177,7 @@ typedef struct { unsigned long pgprot; } pgprot_t;
 /*
  * .. while these make it easier on the compiler
  */
-typedef unsigned long pte_t;
+typedef pteval_t pte_t;
 typedef unsigned long pmd_t;
 typedef unsigned long pgd_t[2];
 typedef unsigned long pgprot_t;
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
index b12cc98bbe0..9763be04f77 100644
--- a/arch/arm/include/asm/pgalloc.h
+++ b/arch/arm/include/asm/pgalloc.h
@@ -30,14 +30,16 @@
 #define pmd_free(mm, pmd)		do { } while (0)
 #define pgd_populate(mm,pmd,pte)	BUG()
 
-extern pgd_t *get_pgd_slow(struct mm_struct *mm);
-extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
-
-#define pgd_alloc(mm)			get_pgd_slow(mm)
-#define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
 
 #define PGALLOC_GFP	(GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
 
+static inline void clean_pte_table(pte_t *pte)
+{
+	clean_dcache_area(pte + PTE_HWTABLE_PTRS, PTE_HWTABLE_SIZE);
+}
+
 /*
  * Allocate one PTE table.
  *
@@ -45,14 +47,14 @@ extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
  * into one table thus:
  *
  *  +------------+
- *  |  h/w pt 0  |
- *  +------------+
- *  |  h/w pt 1  |
- *  +------------+
  *  | Linux pt 0 |
  *  +------------+
  *  | Linux pt 1 |
  *  +------------+
+ *  |  h/w pt 0  |
+ *  +------------+
+ *  |  h/w pt 1  |
+ *  +------------+
  */
 static inline pte_t *
 pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
@@ -60,10 +62,8 @@ pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
 	pte_t *pte;
 
 	pte = (pte_t *)__get_free_page(PGALLOC_GFP);
-	if (pte) {
-		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
-		pte += PTRS_PER_PTE;
-	}
+	if (pte)
+		clean_pte_table(pte);
 
 	return pte;
 }
@@ -79,10 +79,8 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr)
 	pte = alloc_pages(PGALLOC_GFP, 0);
 #endif
 	if (pte) {
-		if (!PageHighMem(pte)) {
-			void *page = page_address(pte);
-			clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
-		}
+		if (!PageHighMem(pte))
+			clean_pte_table(page_address(pte));
 		pgtable_page_ctor(pte);
 	}
 
@@ -94,10 +92,8 @@ pte_alloc_one(struct mm_struct *mm, unsigned long addr)
  */
 static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
 {
-	if (pte) {
-		pte -= PTRS_PER_PTE;
+	if (pte)
 		free_page((unsigned long)pte);
-	}
 }
 
 static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
@@ -106,8 +102,10 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
+static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte,
+	unsigned long prot)
 {
+	unsigned long pmdval = (pte + PTE_HWTABLE_OFF) | prot;
 	pmdp[0] = __pmd(pmdval);
 	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
 	flush_pmd_entry(pmdp);
@@ -122,20 +120,16 @@ static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
 static inline void
 pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
 {
-	unsigned long pte_ptr = (unsigned long)ptep;
-
 	/*
-	 * The pmd must be loaded with the physical
-	 * address of the PTE table
+	 * The pmd must be loaded with the physical address of the PTE table
 	 */
-	pte_ptr -= PTRS_PER_PTE * sizeof(void *);
-	__pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE);
+	__pmd_populate(pmdp, __pa(ptep), _PAGE_KERNEL_TABLE);
 }
 
 static inline void
 pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
 {
-	__pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
+	__pmd_populate(pmdp, page_to_phys(ptep), _PAGE_USER_TABLE);
 }
 #define pmd_pgtable(pmd) pmd_page(pmd)
 
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index b155414192d..ebcb6432f45 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -10,6 +10,7 @@
 #ifndef _ASMARM_PGTABLE_H
 #define _ASMARM_PGTABLE_H
 
+#include <linux/const.h>
 #include <asm-generic/4level-fixup.h>
 #include <asm/proc-fns.h>
 
@@ -54,7 +55,7 @@
  * Therefore, we tweak the implementation slightly - we tell Linux that we
  * have 2048 entries in the first level, each of which is 8 bytes (iow, two
  * hardware pointers to the second level.)  The second level contains two
- * hardware PTE tables arranged contiguously, followed by Linux versions
+ * hardware PTE tables arranged contiguously, preceded by Linux versions
  * which contain the state information Linux needs.  We, therefore, end up
  * with 512 entries in the "PTE" level.
  *
@@ -62,15 +63,15 @@
  *
  *    pgd             pte
  * |        |
- * +--------+ +0
- * |        |-----> +------------+ +0
+ * +--------+
+ * |        |       +------------+ +0
+ * +- - - - +       | Linux pt 0 |
+ * |        |       +------------+ +1024
+ * +--------+ +0    | Linux pt 1 |
+ * |        |-----> +------------+ +2048
  * +- - - - + +4    |  h/w pt 0  |
- * |        |-----> +------------+ +1024
+ * |        |-----> +------------+ +3072
  * +--------+ +8    |  h/w pt 1  |
- * |        |       +------------+ +2048
- * +- - - - +       | Linux pt 0 |
- * |        |       +------------+ +3072
- * +--------+       | Linux pt 1 |
  * |        |       +------------+ +4096
  *
  * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
@@ -102,6 +103,10 @@
 #define PTRS_PER_PMD		1
 #define PTRS_PER_PGD		2048
 
+#define PTE_HWTABLE_PTRS	(PTRS_PER_PTE)
+#define PTE_HWTABLE_OFF		(PTE_HWTABLE_PTRS * sizeof(pte_t))
+#define PTE_HWTABLE_SIZE	(PTRS_PER_PTE * sizeof(u32))
+
 /*
  * PMD_SHIFT determines the size of the area a second-level page table can map
  * PGDIR_SHIFT determines what a third-level page table entry can map
@@ -112,13 +117,13 @@
 #define LIBRARY_TEXT_START	0x0c000000
 
 #ifndef __ASSEMBLY__
-extern void __pte_error(const char *file, int line, unsigned long val);
-extern void __pmd_error(const char *file, int line, unsigned long val);
-extern void __pgd_error(const char *file, int line, unsigned long val);
+extern void __pte_error(const char *file, int line, pte_t);
+extern void __pmd_error(const char *file, int line, pmd_t);
+extern void __pgd_error(const char *file, int line, pgd_t);
 
-#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
-#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd_val(pmd))
-#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
+#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte)
+#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd)
+#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd)
 #endif /* !__ASSEMBLY__ */
 
 #define PMD_SIZE		(1UL << PMD_SHIFT)
@@ -133,8 +138,7 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
  */
 #define FIRST_USER_ADDRESS	PAGE_SIZE
 
-#define FIRST_USER_PGD_NR	1
-#define USER_PTRS_PER_PGD	((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
 
 /*
  * section address mask and size definitions.
@@ -161,30 +165,30 @@ extern void __pgd_error(const char *file, int line, unsigned long val);
  * The PTE table pointer refers to the hardware entries; the "Linux"
  * entries are stored 1024 bytes below.
  */
-#define L_PTE_PRESENT		(1 << 0)
-#define L_PTE_YOUNG		(1 << 1)
-#define L_PTE_FILE		(1 << 2)	/* only when !PRESENT */
-#define L_PTE_DIRTY		(1 << 6)
-#define L_PTE_WRITE		(1 << 7)
-#define L_PTE_USER		(1 << 8)
-#define L_PTE_EXEC		(1 << 9)
-#define L_PTE_SHARED		(1 << 10)	/* shared(v6), coherent(xsc3) */
+#define L_PTE_PRESENT		(_AT(pteval_t, 1) << 0)
+#define L_PTE_YOUNG		(_AT(pteval_t, 1) << 1)
+#define L_PTE_FILE		(_AT(pteval_t, 1) << 2)	/* only when !PRESENT */
+#define L_PTE_DIRTY		(_AT(pteval_t, 1) << 6)
+#define L_PTE_RDONLY		(_AT(pteval_t, 1) << 7)
+#define L_PTE_USER		(_AT(pteval_t, 1) << 8)
+#define L_PTE_XN		(_AT(pteval_t, 1) << 9)
+#define L_PTE_SHARED		(_AT(pteval_t, 1) << 10)	/* shared(v6), coherent(xsc3) */
 
 /*
  * These are the memory types, defined to be compatible with
  * pre-ARMv6 CPUs cacheable and bufferable bits:   XXCB
  */
-#define L_PTE_MT_UNCACHED	(0x00 << 2)	/* 0000 */
-#define L_PTE_MT_BUFFERABLE	(0x01 << 2)	/* 0001 */
-#define L_PTE_MT_WRITETHROUGH	(0x02 << 2)	/* 0010 */
-#define L_PTE_MT_WRITEBACK	(0x03 << 2)	/* 0011 */
-#define L_PTE_MT_MINICACHE	(0x06 << 2)	/* 0110 (sa1100, xscale) */
-#define L_PTE_MT_WRITEALLOC	(0x07 << 2)	/* 0111 */
-#define L_PTE_MT_DEV_SHARED	(0x04 << 2)	/* 0100 */
-#define L_PTE_MT_DEV_NONSHARED	(0x0c << 2)	/* 1100 */
-#define L_PTE_MT_DEV_WC		(0x09 << 2)	/* 1001 */
-#define L_PTE_MT_DEV_CACHED	(0x0b << 2)	/* 1011 */
-#define L_PTE_MT_MASK		(0x0f << 2)
+#define L_PTE_MT_UNCACHED	(_AT(pteval_t, 0x00) << 2)	/* 0000 */
+#define L_PTE_MT_BUFFERABLE	(_AT(pteval_t, 0x01) << 2)	/* 0001 */
+#define L_PTE_MT_WRITETHROUGH	(_AT(pteval_t, 0x02) << 2)	/* 0010 */
+#define L_PTE_MT_WRITEBACK	(_AT(pteval_t, 0x03) << 2)	/* 0011 */
+#define L_PTE_MT_MINICACHE	(_AT(pteval_t, 0x06) << 2)	/* 0110 (sa1100, xscale) */
+#define L_PTE_MT_WRITEALLOC	(_AT(pteval_t, 0x07) << 2)	/* 0111 */
+#define L_PTE_MT_DEV_SHARED	(_AT(pteval_t, 0x04) << 2)	/* 0100 */
+#define L_PTE_MT_DEV_NONSHARED	(_AT(pteval_t, 0x0c) << 2)	/* 1100 */
+#define L_PTE_MT_DEV_WC		(_AT(pteval_t, 0x09) << 2)	/* 1001 */
+#define L_PTE_MT_DEV_CACHED	(_AT(pteval_t, 0x0b) << 2)	/* 1011 */
+#define L_PTE_MT_MASK		(_AT(pteval_t, 0x0f) << 2)
 
 #ifndef __ASSEMBLY__
 
@@ -201,23 +205,44 @@ extern pgprot_t		pgprot_kernel;
 
 #define _MOD_PROT(p, b)	__pgprot(pgprot_val(p) | (b))
 
-#define PAGE_NONE		pgprot_user
-#define PAGE_SHARED		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_WRITE)
-#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_WRITE | L_PTE_EXEC)
-#define PAGE_COPY		_MOD_PROT(pgprot_user, L_PTE_USER)
-#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_EXEC)
-#define PAGE_READONLY		_MOD_PROT(pgprot_user, L_PTE_USER)
-#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_EXEC)
-#define PAGE_KERNEL		pgprot_kernel
-#define PAGE_KERNEL_EXEC	_MOD_PROT(pgprot_kernel, L_PTE_EXEC)
-
-#define __PAGE_NONE		__pgprot(_L_PTE_DEFAULT)
-#define __PAGE_SHARED		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_WRITE)
-#define __PAGE_SHARED_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_WRITE | L_PTE_EXEC)
-#define __PAGE_COPY		__pgprot(_L_PTE_DEFAULT | L_PTE_USER)
-#define __PAGE_COPY_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_EXEC)
-#define __PAGE_READONLY		__pgprot(_L_PTE_DEFAULT | L_PTE_USER)
-#define __PAGE_READONLY_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_EXEC)
+#define PAGE_NONE		_MOD_PROT(pgprot_user, L_PTE_XN | L_PTE_RDONLY)
+#define PAGE_SHARED		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_XN)
+#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER)
+#define PAGE_COPY		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
+#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
+#define PAGE_READONLY		_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
+#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY)
+#define PAGE_KERNEL		_MOD_PROT(pgprot_kernel, L_PTE_XN)
+#define PAGE_KERNEL_EXEC	pgprot_kernel
+
+#define __PAGE_NONE		__pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN)
+#define __PAGE_SHARED		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN)
+#define __PAGE_SHARED_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER)
+#define __PAGE_COPY		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
+#define __PAGE_COPY_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY)
+#define __PAGE_READONLY		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY | L_PTE_XN)
+#define __PAGE_READONLY_EXEC	__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_RDONLY)
+
+#define __pgprot_modify(prot,mask,bits)		\
+	__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
+
+#define pgprot_noncached(prot) \
+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+
+#define pgprot_writecombine(prot) \
+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+#define pgprot_dmacoherent(prot) \
+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#else
+#define pgprot_dmacoherent(prot) \
+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED | L_PTE_XN)
+#endif
 
 #endif /* __ASSEMBLY__ */
 
@@ -255,26 +280,84 @@ extern pgprot_t		pgprot_kernel;
 extern struct page *empty_zero_page;
 #define ZERO_PAGE(vaddr)	(empty_zero_page)
 
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn,prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
 
-#define pte_none(pte)		(!pte_val(pte))
-#define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
-#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
-#define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, addr)	((mm)->pgd + pgd_index(addr))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_present(pgd)	(1)
+#define pgd_clear(pgdp)		do { } while (0)
+#define set_pgd(pgd,pgdp)	do { } while (0)
+
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir, addr)	((pmd_t *)(dir))
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define pmd_present(pmd)	(pmd_val(pmd))
+#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps)		\
+	do {				\
+		pmdpd[0] = pmdps[0];	\
+		pmdpd[1] = pmdps[1];	\
+		flush_pmd_entry(pmdpd);	\
+	} while (0)
+
+#define pmd_clear(pmdp)			\
+	do {				\
+		pmdp[0] = __pmd(0);	\
+		pmdp[1] = __pmd(0);	\
+		clean_pmd_entry(pmdp);	\
+	} while (0)
+
+static inline pte_t *pmd_page_vaddr(pmd_t pmd)
+{
+	return __va(pmd_val(pmd) & PAGE_MASK);
+}
+
+#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
+
+/* we don't need complex calculations here as the pmd is folded into the pgd */
+#define pmd_addr_end(addr,end)	(end)
 
-#define pte_offset_map(dir,addr)	(__pte_map(dir) + __pte_index(addr))
-#define pte_unmap(pte)			__pte_unmap(pte)
 
 #ifndef CONFIG_HIGHPTE
-#define __pte_map(dir)		pmd_page_vaddr(*(dir))
+#define __pte_map(pmd)		pmd_page_vaddr(*(pmd))
 #define __pte_unmap(pte)	do { } while (0)
 #else
-#define __pte_map(dir)		((pte_t *)kmap_atomic(pmd_page(*(dir))) + PTRS_PER_PTE)
-#define __pte_unmap(pte)	kunmap_atomic((pte - PTRS_PER_PTE))
+#define __pte_map(pmd)		(pte_t *)kmap_atomic(pmd_page(*(pmd)))
+#define __pte_unmap(pte)	kunmap_atomic(pte)
 #endif
 
+#define pte_index(addr)		(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(pmd,addr)	(pmd_page_vaddr(*(pmd)) + pte_index(addr))
+
+#define pte_offset_map(pmd,addr)	(__pte_map(pmd) + pte_index(addr))
+#define pte_unmap(pte)			__pte_unmap(pte)
+
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn,prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pte_page(pte)		pfn_to_page(pte_pfn(pte))
+#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page), prot)
+
 #define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+#define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
 #if __LINUX_ARM_ARCH__ < 6
 static inline void __sync_icache_dcache(pte_t pteval)
@@ -295,15 +378,12 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 	}
 }
 
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
+#define pte_none(pte)		(!pte_val(pte))
 #define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
-#define pte_write(pte)		(pte_val(pte) & L_PTE_WRITE)
+#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
 #define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
 #define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
-#define pte_exec(pte)		(pte_val(pte) & L_PTE_EXEC)
+#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
 #define pte_special(pte)	(0)
 
 #define pte_present_user(pte) \
@@ -313,8 +393,8 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
-PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE);
-PTE_BIT_FUNC(mkwrite,   |= L_PTE_WRITE);
+PTE_BIT_FUNC(wrprotect, |= L_PTE_RDONLY);
+PTE_BIT_FUNC(mkwrite,   &= ~L_PTE_RDONLY);
 PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
 PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
 PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
@@ -322,98 +402,13 @@ PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
 
 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 
-#define __pgprot_modify(prot,mask,bits)		\
-	__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
-
-/*
- * Mark the prot value as uncacheable and unbufferable.
- */
-#define pgprot_noncached(prot) \
-	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
-#define pgprot_writecombine(prot) \
-	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
-#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
-#define pgprot_dmacoherent(prot) \
-	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-				     unsigned long size, pgprot_t vma_prot);
-#else
-#define pgprot_dmacoherent(prot) \
-	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
-#endif
-
-#define pmd_none(pmd)		(!pmd_val(pmd))
-#define pmd_present(pmd)	(pmd_val(pmd))
-#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
-
-#define copy_pmd(pmdpd,pmdps)		\
-	do {				\
-		pmdpd[0] = pmdps[0];	\
-		pmdpd[1] = pmdps[1];	\
-		flush_pmd_entry(pmdpd);	\
-	} while (0)
-
-#define pmd_clear(pmdp)			\
-	do {				\
-		pmdp[0] = __pmd(0);	\
-		pmdp[1] = __pmd(0);	\
-		clean_pmd_entry(pmdp);	\
-	} while (0)
-
-static inline pte_t *pmd_page_vaddr(pmd_t pmd)
-{
-	unsigned long ptr;
-
-	ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1);
-	ptr += PTRS_PER_PTE * sizeof(void *);
-
-	return __va(ptr);
-}
-
-#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
-
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_present(pgd)	(1)
-#define pgd_clear(pgdp)		do { } while (0)
-#define set_pgd(pgd,pgdp)	do { } while (0)
-
-/* to find an entry in a page-table-directory */
-#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
-
-#define pgd_offset(mm, addr)	((mm)->pgd+pgd_index(addr))
-
-/* to find an entry in a kernel page-table-directory */
-#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
-
-/* Find an entry in the second-level page table.. */
-#define pmd_offset(dir, addr)	((pmd_t *)(dir))
-
-/* Find an entry in the third-level page table.. */
-#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
-	const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER;
+	const pteval_t mask = L_PTE_XN | L_PTE_RDONLY | L_PTE_USER;
 	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
 	return pte;
 }
 
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
 /*
  * Encode and decode a swap entry.  Swap entries are stored in the Linux
  * page tables as follows:
@@ -478,6 +473,9 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
 #define pgtable_cache_init() do { } while (0)
 
+void identity_mapping_add(pgd_t *, unsigned long, unsigned long);
+void identity_mapping_del(pgd_t *, unsigned long, unsigned long);
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* CONFIG_MMU */
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
new file mode 100644
index 00000000000..a84628be1a7
--- /dev/null
+++ b/arch/arm/include/asm/sched_clock.h
@@ -0,0 +1,118 @@
+/*
+ * sched_clock.h: support for extending counters to full 64-bit ns counter
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_SCHED_CLOCK
+#define ASM_SCHED_CLOCK
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+struct clock_data {
+	u64 epoch_ns;
+	u32 epoch_cyc;
+	u32 epoch_cyc_copy;
+	u32 mult;
+	u32 shift;
+};
+
+#define DEFINE_CLOCK_DATA(name)	struct clock_data name
+
+static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
+{
+	return (cyc * mult) >> shift;
+}
+
+/*
+ * Atomically update the sched_clock epoch.  Your update callback will
+ * be called from a timer before the counter wraps - read the current
+ * counter value, and call this function to safely move the epochs
+ * forward.  Only use this from the update callback.
+ */
+static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask)
+{
+	unsigned long flags;
+	u64 ns = cd->epoch_ns +
+		cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift);
+
+	/*
+	 * Write epoch_cyc and epoch_ns in a way that the update is
+	 * detectable in cyc_to_fixed_sched_clock().
+	 */
+	raw_local_irq_save(flags);
+	cd->epoch_cyc = cyc;
+	smp_wmb();
+	cd->epoch_ns = ns;
+	smp_wmb();
+	cd->epoch_cyc_copy = cyc;
+	raw_local_irq_restore(flags);
+}
+
+/*
+ * If your clock rate is known at compile time, using this will allow
+ * you to optimize the mult/shift loads away.  This is paired with
+ * init_fixed_sched_clock() to ensure that your mult/shift are correct.
+ */
+static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd,
+	u32 cyc, u32 mask, u32 mult, u32 shift)
+{
+	u64 epoch_ns;
+	u32 epoch_cyc;
+
+	/*
+	 * Load the epoch_cyc and epoch_ns atomically.  We do this by
+	 * ensuring that we always write epoch_cyc, epoch_ns and
+	 * epoch_cyc_copy in strict order, and read them in strict order.
+	 * If epoch_cyc and epoch_cyc_copy are not equal, then we're in
+	 * the middle of an update, and we should repeat the load.
+	 */
+	do {
+		epoch_cyc = cd->epoch_cyc;
+		smp_rmb();
+		epoch_ns = cd->epoch_ns;
+		smp_rmb();
+	} while (epoch_cyc != cd->epoch_cyc_copy);
+
+	return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift);
+}
+
+/*
+ * Otherwise, you need to use this, which will obtain the mult/shift
+ * from the clock_data structure.  Use init_sched_clock() with this.
+ */
+static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd,
+	u32 cyc, u32 mask)
+{
+	return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift);
+}
+
+/*
+ * Initialize the clock data - calculate the appropriate multiplier
+ * and shift.  Also setup a timer to ensure that the epoch is refreshed
+ * at the appropriate time interval, which will call your update
+ * handler.
+ */
+void init_sched_clock(struct clock_data *, void (*)(void),
+	unsigned int, unsigned long);
+
+/*
+ * Use this initialization function rather than init_sched_clock() if
+ * you're using cyc_to_fixed_sched_clock, which will warn if your
+ * constants are incorrect.
+ */
+static inline void init_fixed_sched_clock(struct clock_data *cd,
+	void (*update)(void), unsigned int bits, unsigned long rate,
+	u32 mult, u32 shift)
+{
+	init_sched_clock(cd, update, bits, rate);
+	if (cd->mult != mult || cd->shift != shift) {
+		pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n"
+			"sched_clock: fix multiply/shift to avoid scheduler hiccups\n",
+			mult, shift, cd->mult, cd->shift);
+	}
+}
+
+#endif
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
index 4fc1565e4f9..316bb2b2be3 100644
--- a/arch/arm/include/asm/sizes.h
+++ b/arch/arm/include/asm/sizes.h
@@ -13,9 +13,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
 /*  Size definitions
  *  Copyright (C) ARM Limited 1998. All rights reserved.
  */
@@ -25,6 +22,9 @@
 
 /* handy sizes */
 #define SZ_16				0x00000010
+#define SZ_32				0x00000020
+#define SZ_64				0x00000040
+#define SZ_128				0x00000080
 #define SZ_256				0x00000100
 #define SZ_512				0x00000200
 
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 3d05190797c..96ed521f240 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -33,27 +33,23 @@ struct seq_file;
 /*
  * generate IPI list text
  */
-extern void show_ipi_list(struct seq_file *p);
+extern void show_ipi_list(struct seq_file *, int);
 
 /*
  * Called from assembly code, this handles an IPI.
  */
-asmlinkage void do_IPI(struct pt_regs *regs);
+asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
 
 /*
  * Setup the set of possible CPUs (via set_cpu_possible)
  */
 extern void smp_init_cpus(void);
 
-/*
- * Move global data into per-processor storage.
- */
-extern void smp_store_cpu_info(unsigned int cpuid);
 
 /*
  * Raise an IPI cross call on CPUs in callmap.
  */
-extern void smp_cross_call(const struct cpumask *mask);
+extern void smp_cross_call(const struct cpumask *mask, int ipi);
 
 /*
  * Boot a secondary CPU, and assign it the specified idle task.
@@ -73,6 +69,11 @@ asmlinkage void secondary_start_kernel(void);
 extern void platform_secondary_init(unsigned int cpu);
 
 /*
+ * Initialize cpu_possible map, and enable coherency
+ */
+extern void platform_smp_prepare_cpus(unsigned int);
+
+/*
  * Initial data for bringing up a secondary CPU.
  */
 struct secondary_data {
@@ -97,6 +98,6 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
 /*
  * show local interrupt info
  */
-extern void show_local_irqs(struct seq_file *);
+extern void show_local_irqs(struct seq_file *, int);
 
 #endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_mpidr.h b/arch/arm/include/asm/smp_mpidr.h
deleted file mode 100644
index 6a9307d6490..00000000000
--- a/arch/arm/include/asm/smp_mpidr.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef ASMARM_SMP_MIDR_H
-#define ASMARM_SMP_MIDR_H
-
-#define hard_smp_processor_id()						\
-	({								\
-		unsigned int cpunum;					\
-		__asm__("\n"						\
-			"1:	mrc p15, 0, %0, c0, c0, 5\n"		\
-			"	.pushsection \".alt.smp.init\", \"a\"\n"\
-			"	.long	1b\n"				\
-			"	mov	%0, #0\n"			\
-			"	.popsection"				\
-			: "=r" (cpunum));				\
-		cpunum &= 0x0F;						\
-	})
-
-#endif
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index 634f357be6b..fed9981fba0 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -22,7 +22,6 @@ struct clock_event_device;
 
 extern void __iomem *twd_base;
 
-void twd_timer_stop(void);
 int twd_timer_ack(void);
 void twd_timer_setup(struct clock_event_device *);
 
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 1120f18a6b1..97f6d60297d 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -63,6 +63,11 @@
 #include <asm/outercache.h>
 
 #define __exception	__attribute__((section(".exception.text")))
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#define __exception_irq_entry	__irq_entry
+#else
+#define __exception_irq_entry	__exception
+#endif
 
 struct thread_info;
 struct task_struct;
@@ -119,6 +124,13 @@ extern unsigned int user_debug;
 #define vectors_high()	(0)
 #endif
 
+#if __LINUX_ARM_ARCH__ >= 7 ||		\
+	(__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K))
+#define sev()	__asm__ __volatile__ ("sev" : : : "memory")
+#define wfe()	__asm__ __volatile__ ("wfe" : : : "memory")
+#define wfi()	__asm__ __volatile__ ("wfi" : : : "memory")
+#endif
+
 #if __LINUX_ARM_ARCH__ >= 7
 #define isb() __asm__ __volatile__ ("isb" : : : "memory")
 #define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
@@ -150,6 +162,7 @@ extern unsigned int user_debug;
 #define rmb()		dmb()
 #define wmb()		mb()
 #else
+#include <asm/memory.h>
 #define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
index 491960bf426..1b960d5ef6a 100644
--- a/arch/arm/include/asm/traps.h
+++ b/arch/arm/include/asm/traps.h
@@ -15,16 +15,37 @@ struct undef_hook {
 void register_undef_hook(struct undef_hook *hook);
 void unregister_undef_hook(struct undef_hook *hook);
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static inline int __in_irqentry_text(unsigned long ptr)
+{
+	extern char __irqentry_text_start[];
+	extern char __irqentry_text_end[];
+
+	return ptr >= (unsigned long)&__irqentry_text_start &&
+	       ptr < (unsigned long)&__irqentry_text_end;
+}
+#else
+static inline int __in_irqentry_text(unsigned long ptr)
+{
+	return 0;
+}
+#endif
+
 static inline int in_exception_text(unsigned long ptr)
 {
 	extern char __exception_text_start[];
 	extern char __exception_text_end[];
+	int in;
 
-	return ptr >= (unsigned long)&__exception_text_start &&
-	       ptr < (unsigned long)&__exception_text_end;
+	in = ptr >= (unsigned long)&__exception_text_start &&
+	     ptr < (unsigned long)&__exception_text_end;
+
+	return in ? : __in_irqentry_text(ptr);
 }
 
 extern void __init early_trap_init(void);
 extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
 
+extern void *vectors_page;
+
 #endif
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 33e4a48fe10..b293616a1a1 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -227,7 +227,7 @@ do {									\
 
 #define __get_user_asm_byte(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	ldrbt	%1,[%2]\n"				\
+	"1:	" T(ldrb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -263,7 +263,7 @@ do {									\
 
 #define __get_user_asm_word(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	ldrt	%1,[%2]\n"				\
+	"1:	" T(ldr) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -308,7 +308,7 @@ do {									\
 
 #define __put_user_asm_byte(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strbt	%1,[%2]\n"				\
+	"1:	" T(strb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -341,7 +341,7 @@ do {									\
 
 #define __put_user_asm_word(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	strt	%1,[%2]\n"				\
+	"1:	" T(str) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@@ -366,10 +366,10 @@ do {									\
 
 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
- ARM(	"1:	strt	" __reg_oper1 ", [%1], #4\n"	)	\
- ARM(	"2:	strt	" __reg_oper0 ", [%1]\n"	)	\
- THUMB(	"1:	strt	" __reg_oper1 ", [%1]\n"	)	\
- THUMB(	"2:	strt	" __reg_oper0 ", [%1, #4]\n"	)	\
+ ARM(	"1:	" T(str) "	" __reg_oper1 ", [%1], #4\n"	)	\
+ ARM(	"2:	" T(str) "	" __reg_oper0 ", [%1]\n"	)	\
+ THUMB(	"1:	" T(str) "	" __reg_oper1 ", [%1]\n"	)	\
+ THUMB(	"2:	" T(str) "	" __reg_oper0 ", [%1, #4]\n"	)	\
 	"3:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 5b9b268f4fb..185ee822c93 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -5,7 +5,7 @@
 CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
 AFLAGS_head.o        := -DTEXT_OFFSET=$(TEXT_OFFSET)
 
-ifdef CONFIG_DYNAMIC_FTRACE
+ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 endif
 
@@ -29,10 +29,12 @@ obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
-obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_HAVE_SCHED_CLOCK)	+= sched_clock.o
+obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
 obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= ftrace.o
+obj-$(CONFIG_FUNCTION_GRAPH_TRACER)	+= ftrace.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags.o
@@ -42,6 +44,8 @@ obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
 obj-$(CONFIG_HAVE_TCM)		+= tcm.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_SWP_EMULATE)	+= swp_emulate.o
+CFLAGS_swp_emulate.o		:= -Wa,-march=armv7-a
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)	+= hw_breakpoint.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
@@ -50,6 +54,7 @@ AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
 obj-$(CONFIG_CPU_XSCALE)	+= xscale-cp0.o
 obj-$(CONFIG_CPU_XSC3)		+= xscale-cp0.o
 obj-$(CONFIG_CPU_MOHAWK)	+= xscale-cp0.o
+obj-$(CONFIG_CPU_PJ4)		+= pj4-cp0.o
 obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
 obj-$(CONFIG_CPU_HAS_PMU)	+= pmu.o
 obj-$(CONFIG_HW_PERF_EVENTS)	+= perf_event.o
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index c09e3573c5d..2b46fea36c9 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -25,42 +25,22 @@
 #include <asm/tls.h>
 
 #include "entry-header.S"
+#include <asm/entry-macro-multi.S>
 
 /*
  * Interrupt handling.  Preserves r7, r8, r9
  */
 	.macro	irq_handler
-	get_irqnr_preamble r5, lr
-1:	get_irqnr_and_base r0, r6, r5, lr
-	movne	r1, sp
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	adrne	lr, BSYM(1b)
-	bne	asm_do_IRQ
-
-#ifdef CONFIG_SMP
-	/*
-	 * XXX
-	 *
-	 * this macro assumes that irqstat (r6) and base (r5) are
-	 * preserved from get_irqnr_and_base above
-	 */
-	ALT_SMP(test_for_ipi r0, r6, r5, lr)
-	ALT_UP_B(9997f)
-	movne	r0, sp
-	adrne	lr, BSYM(1b)
-	bne	do_IPI
-
-#ifdef CONFIG_LOCAL_TIMERS
-	test_for_ltirq r0, r6, r5, lr
-	movne	r0, sp
-	adrne	lr, BSYM(1b)
-	bne	do_local_timer
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+	ldr	r5, =handle_arch_irq
+	mov	r0, sp
+	ldr	r5, [r5]
+	adr	lr, BSYM(9997f)
+	teq	r5, #0
+	movne	pc, r5
 #endif
+	arch_irq_handler_default
 9997:
-#endif
-
 	.endm
 
 #ifdef CONFIG_KPROBES
@@ -198,6 +178,7 @@ __dabt_svc:
 	@
 	@ set desired IRQ state, then call main handler
 	@
+	debug_entry r1
 	msr	cpsr_c, r9
 	mov	r2, sp
 	bl	do_DataAbort
@@ -324,6 +305,7 @@ __pabt_svc:
 #else
 	bl	CPU_PABORT_HANDLER
 #endif
+	debug_entry r1
 	msr	cpsr_c, r9			@ Maybe enable interrupts
 	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
@@ -439,6 +421,7 @@ __dabt_usr:
 	@
 	@ IRQs on, then call the main handler
 	@
+	debug_entry r1
 	enable_irq
 	mov	r2, sp
 	adr	lr, BSYM(ret_from_exception)
@@ -703,6 +686,7 @@ __pabt_usr:
 #else
 	bl	CPU_PABORT_HANDLER
 #endif
+	debug_entry r1
 	enable_irq				@ Enable interrupts
 	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
@@ -735,7 +719,7 @@ ENTRY(__switch_to)
  THUMB(	stmia	ip!, {r4 - sl, fp}	   )	@ Store most regs on stack
  THUMB(	str	sp, [ip], #4		   )
  THUMB(	str	lr, [ip], #4		   )
-#ifdef CONFIG_MMU
+#ifdef CONFIG_CPU_USE_DOMAINS
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
 	set_tls	r3, r4, r5
@@ -744,7 +728,7 @@ ENTRY(__switch_to)
 	ldr	r8, =__stack_chk_guard
 	ldr	r7, [r7, #TSK_STACK_CANARY]
 #endif
-#ifdef CONFIG_MMU
+#ifdef CONFIG_CPU_USE_DOMAINS
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
 #endif
 	mov	r5, r0
@@ -842,7 +826,7 @@ __kuser_helper_start:
  */
 
 __kuser_memory_barrier:				@ 0xffff0fa0
-	smp_dmb
+	smp_dmb	arm
 	usr_ret	lr
 
 	.align	5
@@ -911,7 +895,7 @@ __kuser_cmpxchg:				@ 0xffff0fc0
 	 * A special ghost syscall is used for that (see traps.c).
 	 */
 	stmfd	sp!, {r7, lr}
-	ldr	r7, =1f			@ it's 20 bits
+	ldr	r7, 1f			@ it's 20 bits
 	swi	__ARM_NR_cmpxchg
 	ldmfd	sp!, {r7, pc}
 1:	.word	__ARM_NR_cmpxchg
@@ -959,7 +943,7 @@ kuser_cmpxchg_fixup:
 
 #else
 
-	smp_dmb
+	smp_dmb	arm
 1:	ldrex	r3, [r2]
 	subs	r3, r3, r0
 	strexeq	r3, r1, [r2]
@@ -1245,3 +1229,9 @@ cr_alignment:
 	.space	4
 cr_no_alignment:
 	.space	4
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+	.globl	handle_arch_irq
+handle_arch_irq:
+	.space	4
+#endif
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 8bfa98757cd..1e7b04a40a3 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -29,6 +29,9 @@ ret_fast_syscall:
 	ldr	r1, [tsk, #TI_FLAGS]
 	tst	r1, #_TIF_WORK_MASK
 	bne	fast_work_pending
+#if defined(CONFIG_IRQSOFF_TRACER)
+	asm_trace_hardirqs_on
+#endif
 
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
@@ -65,6 +68,9 @@ ret_slow_syscall:
 	tst	r1, #_TIF_WORK_MASK
 	bne	work_pending
 no_work_pending:
+#if defined(CONFIG_IRQSOFF_TRACER)
+	asm_trace_hardirqs_on
+#endif
 	/* perform architecture specific actions before user return */
 	arch_ret_to_user r1, lr
 
@@ -141,98 +147,170 @@ ENDPROC(ret_from_fork)
 #endif
 #endif
 
-#ifdef CONFIG_DYNAMIC_FTRACE
-ENTRY(__gnu_mcount_nc)
-	mov	ip, lr
-	ldmia	sp!, {lr}
-	mov	pc, ip
-ENDPROC(__gnu_mcount_nc)
+.macro __mcount suffix
+	mcount_enter
+	ldr	r0, =ftrace_trace_function
+	ldr	r2, [r0]
+	adr	r0, .Lftrace_stub
+	cmp	r0, r2
+	bne	1f
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	ldr     r1, =ftrace_graph_return
+	ldr     r2, [r1]
+	cmp     r0, r2
+	bne     ftrace_graph_caller\suffix
+
+	ldr     r1, =ftrace_graph_entry
+	ldr     r2, [r1]
+	ldr     r0, =ftrace_graph_entry_stub
+	cmp     r0, r2
+	bne     ftrace_graph_caller\suffix
+#endif
 
-ENTRY(ftrace_caller)
-	stmdb	sp!, {r0-r3, lr}
-	mov	r0, lr
+	mcount_exit
+
+1: 	mcount_get_lr	r1			@ lr of instrumented func
+	mov	r0, lr				@ instrumented function
 	sub	r0, r0, #MCOUNT_INSN_SIZE
-	ldr	r1, [sp, #20]
+	adr	lr, BSYM(2f)
+	mov	pc, r2
+2:	mcount_exit
+.endm
+
+.macro __ftrace_caller suffix
+	mcount_enter
 
-	.global	ftrace_call
-ftrace_call:
+	mcount_get_lr	r1			@ lr of instrumented func
+	mov	r0, lr				@ instrumented function
+	sub	r0, r0, #MCOUNT_INSN_SIZE
+
+	.globl ftrace_call\suffix
+ftrace_call\suffix:
 	bl	ftrace_stub
-	ldmia	sp!, {r0-r3, ip, lr}
-	mov	pc, ip
-ENDPROC(ftrace_caller)
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl ftrace_graph_call\suffix
+ftrace_graph_call\suffix:
+	mov	r0, r0
+#endif
+
+	mcount_exit
+.endm
+
+.macro __ftrace_graph_caller
+	sub	r0, fp, #4		@ &lr of instrumented routine (&parent)
+#ifdef CONFIG_DYNAMIC_FTRACE
+	@ called from __ftrace_caller, saved in mcount_enter
+	ldr	r1, [sp, #16]		@ instrumented routine (func)
+#else
+	@ called from __mcount, untouched in lr
+	mov	r1, lr			@ instrumented routine (func)
+#endif
+	sub	r1, r1, #MCOUNT_INSN_SIZE
+	mov	r2, fp			@ frame pointer
+	bl	prepare_ftrace_return
+	mcount_exit
+.endm
 
 #ifdef CONFIG_OLD_MCOUNT
+/*
+ * mcount
+ */
+
+.macro mcount_enter
+	stmdb	sp!, {r0-r3, lr}
+.endm
+
+.macro mcount_get_lr reg
+	ldr	\reg, [fp, #-4]
+.endm
+
+.macro mcount_exit
+	ldr	lr, [fp, #-4]
+	ldmia	sp!, {r0-r3, pc}
+.endm
+
 ENTRY(mcount)
+#ifdef CONFIG_DYNAMIC_FTRACE
 	stmdb	sp!, {lr}
 	ldr	lr, [fp, #-4]
 	ldmia	sp!, {pc}
+#else
+	__mcount _old
+#endif
 ENDPROC(mcount)
 
+#ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller_old)
-	stmdb	sp!, {r0-r3, lr}
-	ldr	r1, [fp, #-4]
-	mov	r0, lr
-	sub	r0, r0, #MCOUNT_INSN_SIZE
-
-	.globl ftrace_call_old
-ftrace_call_old:
-	bl	ftrace_stub
-	ldr	lr, [fp, #-4]			@ restore lr
-	ldmia	sp!, {r0-r3, pc}
+	__ftrace_caller _old
 ENDPROC(ftrace_caller_old)
 #endif
 
-#else
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller_old)
+	__ftrace_graph_caller
+ENDPROC(ftrace_graph_caller_old)
+#endif
 
-ENTRY(__gnu_mcount_nc)
+.purgem mcount_enter
+.purgem mcount_get_lr
+.purgem mcount_exit
+#endif
+
+/*
+ * __gnu_mcount_nc
+ */
+
+.macro mcount_enter
 	stmdb	sp!, {r0-r3, lr}
-	ldr	r0, =ftrace_trace_function
-	ldr	r2, [r0]
-	adr	r0, .Lftrace_stub
-	cmp	r0, r2
-	bne	gnu_trace
+.endm
+
+.macro mcount_get_lr reg
+	ldr	\reg, [sp, #20]
+.endm
+
+.macro mcount_exit
 	ldmia	sp!, {r0-r3, ip, lr}
 	mov	pc, ip
+.endm
 
-gnu_trace:
-	ldr	r1, [sp, #20]			@ lr of instrumented routine
-	mov	r0, lr
-	sub	r0, r0, #MCOUNT_INSN_SIZE
-	adr	lr, BSYM(1f)
-	mov	pc, r2
-1:
-	ldmia	sp!, {r0-r3, ip, lr}
+ENTRY(__gnu_mcount_nc)
+#ifdef CONFIG_DYNAMIC_FTRACE
+	mov	ip, lr
+	ldmia	sp!, {lr}
 	mov	pc, ip
+#else
+	__mcount
+#endif
 ENDPROC(__gnu_mcount_nc)
 
-#ifdef CONFIG_OLD_MCOUNT
-/*
- * This is under an ifdef in order to force link-time errors for people trying
- * to build with !FRAME_POINTER with a GCC which doesn't use the new-style
- * mcount.
- */
-ENTRY(mcount)
-	stmdb	sp!, {r0-r3, lr}
-	ldr	r0, =ftrace_trace_function
-	ldr	r2, [r0]
-	adr	r0, ftrace_stub
-	cmp	r0, r2
-	bne	trace
-	ldr	lr, [fp, #-4]			@ restore lr
-	ldmia	sp!, {r0-r3, pc}
+#ifdef CONFIG_DYNAMIC_FTRACE
+ENTRY(ftrace_caller)
+	__ftrace_caller
+ENDPROC(ftrace_caller)
+#endif
 
-trace:
-	ldr	r1, [fp, #-4]			@ lr of instrumented routine
-	mov	r0, lr
-	sub	r0, r0, #MCOUNT_INSN_SIZE
-	mov	lr, pc
-	mov	pc, r2
-	ldr	lr, [fp, #-4]			@ restore lr
-	ldmia	sp!, {r0-r3, pc}
-ENDPROC(mcount)
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ENTRY(ftrace_graph_caller)
+	__ftrace_graph_caller
+ENDPROC(ftrace_graph_caller)
 #endif
 
-#endif /* CONFIG_DYNAMIC_FTRACE */
+.purgem mcount_enter
+.purgem mcount_get_lr
+.purgem mcount_exit
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+	.globl return_to_handler
+return_to_handler:
+	stmdb	sp!, {r0-r3}
+	mov	r0, fp			@ frame pointer
+	bl	ftrace_return_to_handler
+	mov	lr, r0			@ r0 has real ret addr
+	ldmia	sp!, {r0-r3}
+	mov	pc, lr
+#endif
 
 ENTRY(ftrace_stub)
 .Lftrace_stub:
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index d93f976fb38..ae946490016 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -165,6 +165,25 @@
 	.endm
 #endif	/* !CONFIG_THUMB2_KERNEL */
 
+	@
+	@ Debug exceptions are taken as prefetch or data aborts.
+	@ We must disable preemption during the handler so that
+	@ we can access the debug registers safely.
+	@
+	.macro	debug_entry, fsr
+#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT)
+	ldr	r4, =0x40f		@ mask out fsr.fs
+	and	r5, r4, \fsr
+	cmp	r5, #2			@ debug exception
+	bne	1f
+	get_thread_info r10
+	ldr	r6, [r10, #TI_PREEMPT]	@ get preempt count
+	add	r11, r6, #1		@ increment it
+	str	r11, [r10, #TI_PREEMPT]
+1:
+#endif
+	.endm
+
 /*
  * These are the registers used in the syscall handler, and allow us to
  * have in theory up to 7 arguments to a function - r0 to r6.
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 6ff7919613d..e72dc34eea1 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -45,6 +45,7 @@
 #include <asm/fiq.h>
 #include <asm/irq.h>
 #include <asm/system.h>
+#include <asm/traps.h>
 
 static unsigned long no_fiq_insn;
 
@@ -67,17 +68,22 @@ static struct fiq_handler default_owner = {
 
 static struct fiq_handler *current_fiq = &default_owner;
 
-int show_fiq_list(struct seq_file *p, void *v)
+int show_fiq_list(struct seq_file *p, int prec)
 {
 	if (current_fiq != &default_owner)
-		seq_printf(p, "FIQ:              %s\n", current_fiq->name);
+		seq_printf(p, "%*s:              %s\n", prec, "FIQ",
+			current_fiq->name);
 
 	return 0;
 }
 
 void set_fiq_handler(void *start, unsigned int length)
 {
+#if defined(CONFIG_CPU_USE_DOMAINS)
 	memcpy((void *)0xffff001c, start, length);
+#else
+	memcpy(vectors_page + 0x1c, start, length);
+#endif
 	flush_icache_range(0xffff001c, 0xffff001c + length);
 	if (!vectors_high())
 		flush_icache_range(0x1c, 0x1c + length);
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 971ac8c36ea..c0062ad1e84 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -24,6 +24,7 @@
 #define	NOP		0xe8bd4000	/* pop {lr} */
 #endif
 
+#ifdef CONFIG_DYNAMIC_FTRACE
 #ifdef CONFIG_OLD_MCOUNT
 #define OLD_MCOUNT_ADDR	((unsigned long) mcount)
 #define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
@@ -59,9 +60,9 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
 }
 #endif
 
-/* construct a branch (BL) instruction to addr */
 #ifdef CONFIG_THUMB2_KERNEL
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
+				       bool link)
 {
 	unsigned long s, j1, j2, i1, i2, imm10, imm11;
 	unsigned long first, second;
@@ -83,15 +84,22 @@ static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
 	j2 = (!i2) ^ s;
 
 	first = 0xf000 | (s << 10) | imm10;
-	second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11;
+	second = 0x9000 | (j1 << 13) | (j2 << 11) | imm11;
+	if (link)
+		second |= 1 << 14;
 
 	return (second << 16) | first;
 }
 #else
-static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr,
+				       bool link)
 {
+	unsigned long opcode = 0xea000000;
 	long offset;
 
+	if (link)
+		opcode |= 1 << 24;
+
 	offset = (long)addr - (long)(pc + 8);
 	if (unlikely(offset < -33554432 || offset > 33554428)) {
 		/* Can't generate branches that far (from ARM ARM). Ftrace
@@ -103,10 +111,15 @@ static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
 
 	offset = (offset >> 2) & 0x00ffffff;
 
-	return 0xeb000000 | offset;
+	return opcode | offset;
 }
 #endif
 
+static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
+{
+	return ftrace_gen_branch(pc, addr, true);
+}
+
 static int ftrace_modify_code(unsigned long pc, unsigned long old,
 			      unsigned long new)
 {
@@ -193,3 +206,83 @@ int __init ftrace_dyn_arch_init(void *data)
 
 	return 0;
 }
+#endif /* CONFIG_DYNAMIC_FTRACE */
+
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
+			   unsigned long frame_pointer)
+{
+	unsigned long return_hooker = (unsigned long) &return_to_handler;
+	struct ftrace_graph_ent trace;
+	unsigned long old;
+	int err;
+
+	if (unlikely(atomic_read(&current->tracing_graph_pause)))
+		return;
+
+	old = *parent;
+	*parent = return_hooker;
+
+	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
+				       frame_pointer);
+	if (err == -EBUSY) {
+		*parent = old;
+		return;
+	}
+
+	trace.func = self_addr;
+
+	/* Only trace if the calling function expects to */
+	if (!ftrace_graph_entry(&trace)) {
+		current->curr_ret_stack--;
+		*parent = old;
+	}
+}
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+extern unsigned long ftrace_graph_call;
+extern unsigned long ftrace_graph_call_old;
+extern void ftrace_graph_caller_old(void);
+
+static int __ftrace_modify_caller(unsigned long *callsite,
+				  void (*func) (void), bool enable)
+{
+	unsigned long caller_fn = (unsigned long) func;
+	unsigned long pc = (unsigned long) callsite;
+	unsigned long branch = ftrace_gen_branch(pc, caller_fn, false);
+	unsigned long nop = 0xe1a00000;	/* mov r0, r0 */
+	unsigned long old = enable ? nop : branch;
+	unsigned long new = enable ? branch : nop;
+
+	return ftrace_modify_code(pc, old, new);
+}
+
+static int ftrace_modify_graph_caller(bool enable)
+{
+	int ret;
+
+	ret = __ftrace_modify_caller(&ftrace_graph_call,
+				     ftrace_graph_caller,
+				     enable);
+
+#ifdef CONFIG_OLD_MCOUNT
+	if (!ret)
+		ret = __ftrace_modify_caller(&ftrace_graph_call_old,
+					     ftrace_graph_caller_old,
+					     enable);
+#endif
+
+	return ret;
+}
+
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_graph_caller(true);
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	return ftrace_modify_graph_caller(false);
+}
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index dd6b369ac69..f17d9a09e8f 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -85,10 +85,17 @@ ENTRY(stext)
 	mrc	p15, 0, r9, c0, c0		@ get processor id
 	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
 	movs	r10, r5				@ invalid processor (r5=0)?
+ THUMB( it	eq )		@ force fixup-able long branch encoding
 	beq	__error_p			@ yes, error 'p'
 	bl	__lookup_machine_type		@ r5=machinfo
 	movs	r8, r5				@ invalid machine (r5=0)?
+ THUMB( it	eq )		@ force fixup-able long branch encoding
 	beq	__error_a			@ yes, error 'a'
+
+	/*
+	 * r1 = machine no, r2 = atags,
+	 * r8 = machinfo, r9 = cpuid, r10 = procinfo
+	 */
 	bl	__vet_atags
 #ifdef CONFIG_SMP_ON_UP
 	bl	__fixup_smp
@@ -262,6 +269,7 @@ __create_page_tables:
 	mov	pc, lr
 ENDPROC(__create_page_tables)
 	.ltorg
+	.align
 __enable_mmu_loc:
 	.long	.
 	.long	__enable_mmu
@@ -282,6 +290,7 @@ ENTRY(secondary_startup)
 	bl	__lookup_processor_type
 	movs	r10, r5				@ invalid processor?
 	moveq	r0, #'p'			@ yes, error 'p'
+ THUMB( it	eq )		@ force fixup-able long branch encoding
 	beq	__error_p
 
 	/*
@@ -308,6 +317,8 @@ ENTRY(__secondary_switched)
 	b	secondary_start_kernel
 ENDPROC(__secondary_switched)
 
+	.align
+
 	.type	__secondary_data, %object
 __secondary_data:
 	.long	.
@@ -381,19 +392,19 @@ ENDPROC(__turn_mmu_on)
 
 #ifdef CONFIG_SMP_ON_UP
 __fixup_smp:
-	mov	r7, #0x00070000
-	orr	r6, r7, #0xff000000	@ mask 0xff070000
-	orr	r7, r7, #0x41000000	@ val 0x41070000
-	and	r0, r9, r6
-	teq	r0, r7			@ ARM CPU and ARMv6/v7?
+	mov	r4, #0x00070000
+	orr	r3, r4, #0xff000000	@ mask 0xff070000
+	orr	r4, r4, #0x41000000	@ val 0x41070000
+	and	r0, r9, r3
+	teq	r0, r4			@ ARM CPU and ARMv6/v7?
 	bne	__fixup_smp_on_up	@ no, assume UP
 
-	orr	r6, r6, #0x0000ff00
-	orr	r6, r6, #0x000000f0	@ mask 0xff07fff0
-	orr	r7, r7, #0x0000b000
-	orr	r7, r7, #0x00000020	@ val 0x4107b020
-	and	r0, r9, r6
-	teq	r0, r7			@ ARM 11MPCore?
+	orr	r3, r3, #0x0000ff00
+	orr	r3, r3, #0x000000f0	@ mask 0xff07fff0
+	orr	r4, r4, #0x0000b000
+	orr	r4, r4, #0x00000020	@ val 0x4107b020
+	and	r0, r9, r3
+	teq	r0, r4			@ ARM 11MPCore?
 	moveq	pc, lr			@ yes, assume SMP
 
 	mrc	p15, 0, r0, c0, c0, 5	@ read MPIDR
@@ -402,17 +413,25 @@ __fixup_smp:
 
 __fixup_smp_on_up:
 	adr	r0, 1f
-	ldmia	r0, {r3, r6, r7}
+	ldmia	r0, {r3 - r5}
 	sub	r3, r0, r3
-	add	r6, r6, r3
-	add	r7, r7, r3
-2:	cmp	r6, r7
-	ldmia	r6!, {r0, r4}
-	strlo	r4, [r0, r3]
-	blo	2b
-	mov	pc, lr
+	add	r4, r4, r3
+	add	r5, r5, r3
+2:	cmp	r4, r5
+	movhs	pc, lr
+	ldmia	r4!, {r0, r6}
+ ARM(	str	r6, [r0, r3]	)
+ THUMB(	add	r0, r0, r3	)
+#ifdef __ARMEB__
+ THUMB(	mov	r6, r6, ror #16	)	@ Convert word order for big-endian.
+#endif
+ THUMB(	strh	r6, [r0], #2	)	@ For Thumb-2, store as two halfwords
+ THUMB(	mov	r6, r6, lsr #16	)	@ to be robust against misaligned r3.
+ THUMB(	strh	r6, [r0]	)
+	b	2b
 ENDPROC(__fixup_smp)
 
+	.align
 1:	.word	.
 	.word	__smpalt_begin
 	.word	__smpalt_end
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 54593b0c241..c9f3f046757 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -24,6 +24,7 @@
 #define pr_fmt(fmt) "hw-breakpoint: " fmt
 
 #include <linux/errno.h>
+#include <linux/hardirq.h>
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/smp.h>
@@ -44,6 +45,7 @@ static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]);
 
 /* Number of BRP/WRP registers on this CPU. */
 static int core_num_brps;
+static int core_num_reserved_brps;
 static int core_num_wrps;
 
 /* Debug architecture version. */
@@ -52,87 +54,6 @@ static u8 debug_arch;
 /* Maximum supported watchpoint length. */
 static u8 max_watchpoint_len;
 
-/* Determine number of BRP registers available. */
-static int get_num_brps(void)
-{
-	u32 didr;
-	ARM_DBG_READ(c0, 0, didr);
-	return ((didr >> 24) & 0xf) + 1;
-}
-
-/* Determine number of WRP registers available. */
-static int get_num_wrps(void)
-{
-	/*
-	 * FIXME: When a watchpoint fires, the only way to work out which
-	 * watchpoint it was is by disassembling the faulting instruction
-	 * and working out the address of the memory access.
-	 *
-	 * Furthermore, we can only do this if the watchpoint was precise
-	 * since imprecise watchpoints prevent us from calculating register
-	 * based addresses.
-	 *
-	 * For the time being, we only report 1 watchpoint register so we
-	 * always know which watchpoint fired. In the future we can either
-	 * add a disassembler and address generation emulator, or we can
-	 * insert a check to see if the DFAR is set on watchpoint exception
-	 * entry [the ARM ARM states that the DFAR is UNKNOWN, but
-	 * experience shows that it is set on some implementations].
-	 */
-
-#if 0
-	u32 didr, wrps;
-	ARM_DBG_READ(c0, 0, didr);
-	return ((didr >> 28) & 0xf) + 1;
-#endif
-
-	return 1;
-}
-
-int hw_breakpoint_slots(int type)
-{
-	/*
-	 * We can be called early, so don't rely on
-	 * our static variables being initialised.
-	 */
-	switch (type) {
-	case TYPE_INST:
-		return get_num_brps();
-	case TYPE_DATA:
-		return get_num_wrps();
-	default:
-		pr_warning("unknown slot type: %d\n", type);
-		return 0;
-	}
-}
-
-/* Determine debug architecture. */
-static u8 get_debug_arch(void)
-{
-	u32 didr;
-
-	/* Do we implement the extended CPUID interface? */
-	if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
-		pr_warning("CPUID feature registers not supported. "
-				"Assuming v6 debug is present.\n");
-		return ARM_DEBUG_ARCH_V6;
-	}
-
-	ARM_DBG_READ(c0, 0, didr);
-	return (didr >> 16) & 0xf;
-}
-
-/* Does this core support mismatch breakpoints? */
-static int core_has_mismatch_bps(void)
-{
-	return debug_arch >= ARM_DEBUG_ARCH_V7_ECP14 && core_num_brps > 1;
-}
-
-u8 arch_get_debug_arch(void)
-{
-	return debug_arch;
-}
-
 #define READ_WB_REG_CASE(OP2, M, VAL)		\
 	case ((OP2 << 4) + M):			\
 		ARM_DBG_READ(c ## M, OP2, VAL); \
@@ -210,6 +131,94 @@ static void write_wb_reg(int n, u32 val)
 	isb();
 }
 
+/* Determine debug architecture. */
+static u8 get_debug_arch(void)
+{
+	u32 didr;
+
+	/* Do we implement the extended CPUID interface? */
+	if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+		pr_warning("CPUID feature registers not supported. "
+				"Assuming v6 debug is present.\n");
+		return ARM_DEBUG_ARCH_V6;
+	}
+
+	ARM_DBG_READ(c0, 0, didr);
+	return (didr >> 16) & 0xf;
+}
+
+u8 arch_get_debug_arch(void)
+{
+	return debug_arch;
+}
+
+/* Determine number of BRP register available. */
+static int get_num_brp_resources(void)
+{
+	u32 didr;
+	ARM_DBG_READ(c0, 0, didr);
+	return ((didr >> 24) & 0xf) + 1;
+}
+
+/* Does this core support mismatch breakpoints? */
+static int core_has_mismatch_brps(void)
+{
+	return (get_debug_arch() >= ARM_DEBUG_ARCH_V7_ECP14 &&
+		get_num_brp_resources() > 1);
+}
+
+/* Determine number of usable WRPs available. */
+static int get_num_wrps(void)
+{
+	/*
+	 * FIXME: When a watchpoint fires, the only way to work out which
+	 * watchpoint it was is by disassembling the faulting instruction
+	 * and working out the address of the memory access.
+	 *
+	 * Furthermore, we can only do this if the watchpoint was precise
+	 * since imprecise watchpoints prevent us from calculating register
+	 * based addresses.
+	 *
+	 * Providing we have more than 1 breakpoint register, we only report
+	 * a single watchpoint register for the time being. This way, we always
+	 * know which watchpoint fired. In the future we can either add a
+	 * disassembler and address generation emulator, or we can insert a
+	 * check to see if the DFAR is set on watchpoint exception entry
+	 * [the ARM ARM states that the DFAR is UNKNOWN, but experience shows
+	 * that it is set on some implementations].
+	 */
+
+#if 0
+	int wrps;
+	u32 didr;
+	ARM_DBG_READ(c0, 0, didr);
+	wrps = ((didr >> 28) & 0xf) + 1;
+#endif
+	int wrps = 1;
+
+	if (core_has_mismatch_brps() && wrps >= get_num_brp_resources())
+		wrps = get_num_brp_resources() - 1;
+
+	return wrps;
+}
+
+/* We reserve one breakpoint for each watchpoint. */
+static int get_num_reserved_brps(void)
+{
+	if (core_has_mismatch_brps())
+		return get_num_wrps();
+	return 0;
+}
+
+/* Determine number of usable BRPs available. */
+static int get_num_brps(void)
+{
+	int brps = get_num_brp_resources();
+	if (core_has_mismatch_brps())
+		brps -= get_num_reserved_brps();
+	return brps;
+}
+
 /*
  * In order to access the breakpoint/watchpoint control registers,
  * we must be running in debug monitor mode. Unfortunately, we can
@@ -230,8 +239,12 @@ static int enable_monitor_mode(void)
 		goto out;
 	}
 
+	/* If monitor mode is already enabled, just return. */
+	if (dscr & ARM_DSCR_MDBGEN)
+		goto out;
+
 	/* Write to the corresponding DSCR. */
-	switch (debug_arch) {
+	switch (get_debug_arch()) {
 	case ARM_DEBUG_ARCH_V6:
 	case ARM_DEBUG_ARCH_V6_1:
 		ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
@@ -246,15 +259,30 @@ static int enable_monitor_mode(void)
 
 	/* Check that the write made it through. */
 	ARM_DBG_READ(c1, 0, dscr);
-	if (WARN_ONCE(!(dscr & ARM_DSCR_MDBGEN),
-				"failed to enable monitor mode.")) {
+	if (!(dscr & ARM_DSCR_MDBGEN))
 		ret = -EPERM;
-	}
 
 out:
 	return ret;
 }
 
+int hw_breakpoint_slots(int type)
+{
+	/*
+	 * We can be called early, so don't rely on
+	 * our static variables being initialised.
+	 */
+	switch (type) {
+	case TYPE_INST:
+		return get_num_brps();
+	case TYPE_DATA:
+		return get_num_wrps();
+	default:
+		pr_warning("unknown slot type: %d\n", type);
+		return 0;
+	}
+}
+
 /*
  * Check if 8-bit byte-address select is available.
  * This clobbers WRP 0.
@@ -268,9 +296,6 @@ static u8 get_max_wp_len(void)
 	if (debug_arch < ARM_DEBUG_ARCH_V7_ECP14)
 		goto out;
 
-	if (enable_monitor_mode())
-		goto out;
-
 	memset(&ctrl, 0, sizeof(ctrl));
 	ctrl.len = ARM_BREAKPOINT_LEN_8;
 	ctrl_reg = encode_ctrl_reg(ctrl);
@@ -290,23 +315,6 @@ u8 arch_get_max_wp_len(void)
 }
 
 /*
- * Handler for reactivating a suspended watchpoint when the single
- * step `mismatch' breakpoint is triggered.
- */
-static void wp_single_step_handler(struct perf_event *bp, int unused,
-				   struct perf_sample_data *data,
-				   struct pt_regs *regs)
-{
-	perf_event_enable(counter_arch_bp(bp)->suspended_wp);
-	unregister_hw_breakpoint(bp);
-}
-
-static int bp_is_single_step(struct perf_event *bp)
-{
-	return bp->overflow_handler == wp_single_step_handler;
-}
-
-/*
  * Install a perf counter breakpoint.
  */
 int arch_install_hw_breakpoint(struct perf_event *bp)
@@ -314,30 +322,41 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
 	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
 	struct perf_event **slot, **slots;
 	int i, max_slots, ctrl_base, val_base, ret = 0;
+	u32 addr, ctrl;
 
 	/* Ensure that we are in monitor mode and halting mode is disabled. */
 	ret = enable_monitor_mode();
 	if (ret)
 		goto out;
 
+	addr = info->address;
+	ctrl = encode_ctrl_reg(info->ctrl) | 0x1;
+
 	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
 		/* Breakpoint */
 		ctrl_base = ARM_BASE_BCR;
 		val_base = ARM_BASE_BVR;
-		slots = __get_cpu_var(bp_on_reg);
-		max_slots = core_num_brps - 1;
-
-		if (bp_is_single_step(bp)) {
-			info->ctrl.mismatch = 1;
-			i = max_slots;
-			slots[i] = bp;
-			goto setup;
+		slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+		max_slots = core_num_brps;
+		if (info->step_ctrl.enabled) {
+			/* Override the breakpoint data with the step data. */
+			addr = info->trigger & ~0x3;
+			ctrl = encode_ctrl_reg(info->step_ctrl);
 		}
 	} else {
 		/* Watchpoint */
-		ctrl_base = ARM_BASE_WCR;
-		val_base = ARM_BASE_WVR;
-		slots = __get_cpu_var(wp_on_reg);
+		if (info->step_ctrl.enabled) {
+			/* Install into the reserved breakpoint region. */
+			ctrl_base = ARM_BASE_BCR + core_num_brps;
+			val_base = ARM_BASE_BVR + core_num_brps;
+			/* Override the watchpoint data with the step data. */
+			addr = info->trigger & ~0x3;
+			ctrl = encode_ctrl_reg(info->step_ctrl);
+		} else {
+			ctrl_base = ARM_BASE_WCR;
+			val_base = ARM_BASE_WVR;
+		}
+		slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
 		max_slots = core_num_wrps;
 	}
 
@@ -355,12 +374,11 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
 		goto out;
 	}
 
-setup:
 	/* Setup the address register. */
-	write_wb_reg(val_base + i, info->address);
+	write_wb_reg(val_base + i, addr);
 
 	/* Setup the control register. */
-	write_wb_reg(ctrl_base + i, encode_ctrl_reg(info->ctrl) | 0x1);
+	write_wb_reg(ctrl_base + i, ctrl);
 
 out:
 	return ret;
@@ -375,18 +393,15 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
 	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE) {
 		/* Breakpoint */
 		base = ARM_BASE_BCR;
-		slots = __get_cpu_var(bp_on_reg);
-		max_slots = core_num_brps - 1;
-
-		if (bp_is_single_step(bp)) {
-			i = max_slots;
-			slots[i] = NULL;
-			goto reset;
-		}
+		slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+		max_slots = core_num_brps;
 	} else {
 		/* Watchpoint */
-		base = ARM_BASE_WCR;
-		slots = __get_cpu_var(wp_on_reg);
+		if (info->step_ctrl.enabled)
+			base = ARM_BASE_BCR + core_num_brps;
+		else
+			base = ARM_BASE_WCR;
+		slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
 		max_slots = core_num_wrps;
 	}
 
@@ -403,7 +418,6 @@ void arch_uninstall_hw_breakpoint(struct perf_event *bp)
 	if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot"))
 		return;
 
-reset:
 	/* Reset the control register. */
 	write_wb_reg(base + i, 0);
 }
@@ -537,12 +551,23 @@ static int arch_build_bp_info(struct perf_event *bp)
 		return -EINVAL;
 	}
 
+	/*
+	 * Breakpoints must be of length 2 (thumb) or 4 (ARM) bytes.
+	 * Watchpoints can be of length 1, 2, 4 or 8 bytes if supported
+	 * by the hardware and must be aligned to the appropriate number of
+	 * bytes.
+	 */
+	if (info->ctrl.type == ARM_BREAKPOINT_EXECUTE &&
+	    info->ctrl.len != ARM_BREAKPOINT_LEN_2 &&
+	    info->ctrl.len != ARM_BREAKPOINT_LEN_4)
+		return -EINVAL;
+
 	/* Address */
 	info->address = bp->attr.bp_addr;
 
 	/* Privilege */
 	info->ctrl.privilege = ARM_BREAKPOINT_USER;
-	if (arch_check_bp_in_kernelspace(bp) && !bp_is_single_step(bp))
+	if (arch_check_bp_in_kernelspace(bp))
 		info->ctrl.privilege |= ARM_BREAKPOINT_PRIV;
 
 	/* Enabled? */
@@ -561,7 +586,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 {
 	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
 	int ret = 0;
-	u32 bytelen, max_len, offset, alignment_mask = 0x3;
+	u32 offset, alignment_mask = 0x3;
 
 	/* Build the arch_hw_breakpoint. */
 	ret = arch_build_bp_info(bp);
@@ -571,84 +596,85 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp)
 	/* Check address alignment. */
 	if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
 		alignment_mask = 0x7;
-	if (info->address & alignment_mask) {
-		/*
-		 * Try to fix the alignment. This may result in a length
-		 * that is too large, so we must check for that.
-		 */
-		bytelen = get_hbp_len(info->ctrl.len);
-		max_len = info->ctrl.type == ARM_BREAKPOINT_EXECUTE ? 4 :
-				max_watchpoint_len;
-
-		if (max_len >= 8)
-			offset = info->address & 0x7;
-		else
-			offset = info->address & 0x3;
-
-		if (bytelen > (1 << ((max_len - (offset + 1)) >> 1))) {
-			ret = -EFBIG;
-			goto out;
-		}
-
-		info->ctrl.len <<= offset;
-		info->address &= ~offset;
-
-		pr_debug("breakpoint alignment fixup: length = 0x%x, "
-			"address = 0x%x\n", info->ctrl.len, info->address);
+	offset = info->address & alignment_mask;
+	switch (offset) {
+	case 0:
+		/* Aligned */
+		break;
+	case 1:
+		/* Allow single byte watchpoint. */
+		if (info->ctrl.len == ARM_BREAKPOINT_LEN_1)
+			break;
+	case 2:
+		/* Allow halfword watchpoints and breakpoints. */
+		if (info->ctrl.len == ARM_BREAKPOINT_LEN_2)
+			break;
+	default:
+		ret = -EINVAL;
+		goto out;
 	}
 
+	info->address &= ~alignment_mask;
+	info->ctrl.len <<= offset;
+
 	/*
 	 * Currently we rely on an overflow handler to take
 	 * care of single-stepping the breakpoint when it fires.
 	 * In the case of userspace breakpoints on a core with V7 debug,
-	 * we can use the mismatch feature as a poor-man's hardware single-step.
+	 * we can use the mismatch feature as a poor-man's hardware
+	 * single-step, but this only works for per-task breakpoints.
 	 */
 	if (WARN_ONCE(!bp->overflow_handler &&
-		(arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_bps()),
+		(arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps()
+		 || !bp->hw.bp_target),
 			"overflow handler required but none found")) {
 		ret = -EINVAL;
-		goto out;
 	}
 out:
 	return ret;
 }
 
-static void update_mismatch_flag(int idx, int flag)
+/*
+ * Enable/disable single-stepping over the breakpoint bp at address addr.
+ */
+static void enable_single_step(struct perf_event *bp, u32 addr)
 {
-	struct perf_event *bp = __get_cpu_var(bp_on_reg[idx]);
-	struct arch_hw_breakpoint *info;
-
-	if (bp == NULL)
-		return;
+	struct arch_hw_breakpoint *info = counter_arch_bp(bp);
 
-	info = counter_arch_bp(bp);
+	arch_uninstall_hw_breakpoint(bp);
+	info->step_ctrl.mismatch  = 1;
+	info->step_ctrl.len	  = ARM_BREAKPOINT_LEN_4;
+	info->step_ctrl.type	  = ARM_BREAKPOINT_EXECUTE;
+	info->step_ctrl.privilege = info->ctrl.privilege;
+	info->step_ctrl.enabled	  = 1;
+	info->trigger		  = addr;
+	arch_install_hw_breakpoint(bp);
+}
 
-	/* Update the mismatch field to enter/exit `single-step' mode */
-	if (!bp->overflow_handler && info->ctrl.mismatch != flag) {
-		info->ctrl.mismatch = flag;
-		write_wb_reg(ARM_BASE_BCR + idx, encode_ctrl_reg(info->ctrl) | 0x1);
-	}
+static void disable_single_step(struct perf_event *bp)
+{
+	arch_uninstall_hw_breakpoint(bp);
+	counter_arch_bp(bp)->step_ctrl.enabled = 0;
+	arch_install_hw_breakpoint(bp);
 }
 
 static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
 {
 	int i;
-	struct perf_event *bp, **slots = __get_cpu_var(wp_on_reg);
+	struct perf_event *wp, **slots;
 	struct arch_hw_breakpoint *info;
-	struct perf_event_attr attr;
+
+	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
 
 	/* Without a disassembler, we can only handle 1 watchpoint. */
 	BUG_ON(core_num_wrps > 1);
 
-	hw_breakpoint_init(&attr);
-	attr.bp_addr	= regs->ARM_pc & ~0x3;
-	attr.bp_len	= HW_BREAKPOINT_LEN_4;
-	attr.bp_type	= HW_BREAKPOINT_X;
-
 	for (i = 0; i < core_num_wrps; ++i) {
 		rcu_read_lock();
 
-		if (slots[i] == NULL) {
+		wp = slots[i];
+
+		if (wp == NULL) {
 			rcu_read_unlock();
 			continue;
 		}
@@ -658,24 +684,51 @@ static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
 		 * single watchpoint, we can set the trigger to the lowest
 		 * possible faulting address.
 		 */
-		info = counter_arch_bp(slots[i]);
-		info->trigger = slots[i]->attr.bp_addr;
+		info = counter_arch_bp(wp);
+		info->trigger = wp->attr.bp_addr;
 		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
-		perf_bp_event(slots[i], regs);
+		perf_bp_event(wp, regs);
 
 		/*
 		 * If no overflow handler is present, insert a temporary
 		 * mismatch breakpoint so we can single-step over the
 		 * watchpoint trigger.
 		 */
-		if (!slots[i]->overflow_handler) {
-			bp = register_user_hw_breakpoint(&attr,
-							 wp_single_step_handler,
-							 current);
-			counter_arch_bp(bp)->suspended_wp = slots[i];
-			perf_event_disable(slots[i]);
-		}
+		if (!wp->overflow_handler)
+			enable_single_step(wp, instruction_pointer(regs));
+
+		rcu_read_unlock();
+	}
+}
 
+static void watchpoint_single_step_handler(unsigned long pc)
+{
+	int i;
+	struct perf_event *wp, **slots;
+	struct arch_hw_breakpoint *info;
+
+	slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
+
+	for (i = 0; i < core_num_reserved_brps; ++i) {
+		rcu_read_lock();
+
+		wp = slots[i];
+
+		if (wp == NULL)
+			goto unlock;
+
+		info = counter_arch_bp(wp);
+		if (!info->step_ctrl.enabled)
+			goto unlock;
+
+		/*
+		 * Restore the original watchpoint if we've completed the
+		 * single-step.
+		 */
+		if (info->trigger != pc)
+			disable_single_step(wp);
+
+unlock:
 		rcu_read_unlock();
 	}
 }
@@ -683,62 +736,69 @@ static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
 static void breakpoint_handler(unsigned long unknown, struct pt_regs *regs)
 {
 	int i;
-	int mismatch;
 	u32 ctrl_reg, val, addr;
-	struct perf_event *bp, **slots = __get_cpu_var(bp_on_reg);
+	struct perf_event *bp, **slots;
 	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
+	slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
+
 	/* The exception entry code places the amended lr in the PC. */
 	addr = regs->ARM_pc;
 
+	/* Check the currently installed breakpoints first. */
 	for (i = 0; i < core_num_brps; ++i) {
 		rcu_read_lock();
 
 		bp = slots[i];
 
-		if (bp == NULL) {
-			rcu_read_unlock();
-			continue;
-		}
+		if (bp == NULL)
+			goto unlock;
 
-		mismatch = 0;
+		info = counter_arch_bp(bp);
 
 		/* Check if the breakpoint value matches. */
 		val = read_wb_reg(ARM_BASE_BVR + i);
 		if (val != (addr & ~0x3))
-			goto unlock;
+			goto mismatch;
 
 		/* Possible match, check the byte address select to confirm. */
 		ctrl_reg = read_wb_reg(ARM_BASE_BCR + i);
 		decode_ctrl_reg(ctrl_reg, &ctrl);
 		if ((1 << (addr & 0x3)) & ctrl.len) {
-			mismatch = 1;
-			info = counter_arch_bp(bp);
 			info->trigger = addr;
-		}
-
-unlock:
-		if ((mismatch && !info->ctrl.mismatch) || bp_is_single_step(bp)) {
 			pr_debug("breakpoint fired: address = 0x%x\n", addr);
 			perf_bp_event(bp, regs);
+			if (!bp->overflow_handler)
+				enable_single_step(bp, addr);
+			goto unlock;
 		}
 
-		update_mismatch_flag(i, mismatch);
+mismatch:
+		/* If we're stepping a breakpoint, it can now be restored. */
+		if (info->step_ctrl.enabled)
+			disable_single_step(bp);
+unlock:
 		rcu_read_unlock();
 	}
+
+	/* Handle any pending watchpoint single-step breakpoints. */
+	watchpoint_single_step_handler(addr);
 }
 
 /*
  * Called from either the Data Abort Handler [watchpoint] or the
- * Prefetch Abort Handler [breakpoint].
+ * Prefetch Abort Handler [breakpoint] with preemption disabled.
  */
 static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 				 struct pt_regs *regs)
 {
-	int ret = 1; /* Unhandled fault. */
+	int ret = 0;
 	u32 dscr;
 
+	/* We must be called with preemption disabled. */
+	WARN_ON(preemptible());
+
 	/* We only handle watchpoints and hardware breakpoints. */
 	ARM_DBG_READ(c1, 0, dscr);
 
@@ -748,31 +808,52 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 		breakpoint_handler(addr, regs);
 		break;
 	case ARM_ENTRY_ASYNC_WATCHPOINT:
-		WARN_ON("Asynchronous watchpoint exception taken. "
-			"Debugging results may be unreliable");
+		WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
 	case ARM_ENTRY_SYNC_WATCHPOINT:
 		watchpoint_handler(addr, regs);
 		break;
 	default:
-		goto out;
+		ret = 1; /* Unhandled fault. */
 	}
 
-	ret = 0;
-out:
+	/*
+	 * Re-enable preemption after it was disabled in the
+	 * low-level exception handling code.
+	 */
+	preempt_enable();
+
 	return ret;
 }
 
 /*
  * One-time initialisation.
  */
-static void __init reset_ctrl_regs(void *unused)
+static void reset_ctrl_regs(void *unused)
 {
 	int i;
 
+	/*
+	 * v7 debug contains save and restore registers so that debug state
+	 * can be maintained across low-power modes without leaving
+	 * the debug logic powered up. It is IMPLEMENTATION DEFINED whether
+	 * we can write to the debug registers out of reset, so we must
+	 * unlock the OS Lock Access Register to avoid taking undefined
+	 * instruction exceptions later on.
+	 */
+	if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
+		/*
+		 * Unconditionally clear the lock by writing a value
+		 * other than 0xC5ACCE55 to the access register.
+		 */
+		asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
+		isb();
+	}
+
 	if (enable_monitor_mode())
 		return;
 
-	for (i = 0; i < core_num_brps; ++i) {
+	/* We must also reset any reserved registers. */
+	for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) {
 		write_wb_reg(ARM_BASE_BCR + i, 0UL);
 		write_wb_reg(ARM_BASE_BVR + i, 0UL);
 	}
@@ -783,45 +864,57 @@ static void __init reset_ctrl_regs(void *unused)
 	}
 }
 
+static int __cpuinit dbg_reset_notify(struct notifier_block *self,
+				      unsigned long action, void *cpu)
+{
+	if (action == CPU_ONLINE)
+		smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata dbg_reset_nb = {
+	.notifier_call = dbg_reset_notify,
+};
+
 static int __init arch_hw_breakpoint_init(void)
 {
-	int ret = 0;
 	u32 dscr;
 
 	debug_arch = get_debug_arch();
 
 	if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) {
 		pr_info("debug architecture 0x%x unsupported.\n", debug_arch);
-		ret = -ENODEV;
-		goto out;
+		return 0;
 	}
 
 	/* Determine how many BRPs/WRPs are available. */
 	core_num_brps = get_num_brps();
+	core_num_reserved_brps = get_num_reserved_brps();
 	core_num_wrps = get_num_wrps();
 
 	pr_info("found %d breakpoint and %d watchpoint registers.\n",
-			core_num_brps, core_num_wrps);
+		core_num_brps + core_num_reserved_brps, core_num_wrps);
 
-	if (core_has_mismatch_bps())
-		pr_info("1 breakpoint reserved for watchpoint single-step.\n");
+	if (core_num_reserved_brps)
+		pr_info("%d breakpoint(s) reserved for watchpoint "
+				"single-step.\n", core_num_reserved_brps);
 
 	ARM_DBG_READ(c1, 0, dscr);
 	if (dscr & ARM_DSCR_HDBGEN) {
 		pr_warning("halting debug mode enabled. Assuming maximum "
 				"watchpoint size of 4 bytes.");
 	} else {
-		/* Work out the maximum supported watchpoint length. */
-		max_watchpoint_len = get_max_wp_len();
-		pr_info("maximum watchpoint size is %u bytes.\n",
-				max_watchpoint_len);
-
 		/*
 		 * Reset the breakpoint resources. We assume that a halting
 		 * debugger will leave the world in a nice state for us.
 		 */
 		smp_call_function(reset_ctrl_regs, NULL, 1);
 		reset_ctrl_regs(NULL);
+
+		/* Work out the maximum supported watchpoint length. */
+		max_watchpoint_len = get_max_wp_len();
+		pr_info("maximum watchpoint size is %u bytes.\n",
+				max_watchpoint_len);
 	}
 
 	/* Register debug fault handler. */
@@ -830,8 +923,9 @@ static int __init arch_hw_breakpoint_init(void)
 	hook_ifault_code(2, hw_breakpoint_pending, SIGTRAP, TRAP_HWBKPT,
 			"breakpoint debug exception");
 
-out:
-	return ret;
+	/* Register hotplug notifier. */
+	register_cpu_notifier(&dbg_reset_nb);
+	return 0;
 }
 arch_initcall(arch_hw_breakpoint_init);
 
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 36ad3be4692..8135438b881 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -35,8 +35,10 @@
 #include <linux/list.h>
 #include <linux/kallsyms.h>
 #include <linux/proc_fs.h>
+#include <linux/ftrace.h>
 
 #include <asm/system.h>
+#include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
@@ -47,8 +49,6 @@
 #define irq_finish(irq) do { } while (0)
 #endif
 
-unsigned int arch_nr_irqs;
-void (*init_arch_irq)(void) __initdata = NULL;
 unsigned long irq_err_count;
 
 int show_interrupts(struct seq_file *p, void *v)
@@ -57,11 +57,20 @@ int show_interrupts(struct seq_file *p, void *v)
 	struct irq_desc *desc;
 	struct irqaction * action;
 	unsigned long flags;
+	int prec, n;
+
+	for (prec = 3, n = 1000; prec < 10 && n <= nr_irqs; prec++)
+		n *= 10;
+
+#ifdef CONFIG_SMP
+	if (prec < 4)
+		prec = 4;
+#endif
 
 	if (i == 0) {
 		char cpuname[12];
 
-		seq_printf(p, "    ");
+		seq_printf(p, "%*s ", prec, "");
 		for_each_present_cpu(cpu) {
 			sprintf(cpuname, "CPU%d", cpu);
 			seq_printf(p, " %10s", cpuname);
@@ -76,7 +85,7 @@ int show_interrupts(struct seq_file *p, void *v)
 		if (!action)
 			goto unlock;
 
-		seq_printf(p, "%3d: ", i);
+		seq_printf(p, "%*d: ", prec, i);
 		for_each_present_cpu(cpu)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
 		seq_printf(p, " %10s", desc->chip->name ? : "-");
@@ -89,13 +98,15 @@ unlock:
 		raw_spin_unlock_irqrestore(&desc->lock, flags);
 	} else if (i == nr_irqs) {
 #ifdef CONFIG_FIQ
-		show_fiq_list(p, v);
+		show_fiq_list(p, prec);
 #endif
 #ifdef CONFIG_SMP
-		show_ipi_list(p);
-		show_local_irqs(p);
+		show_ipi_list(p, prec);
+#endif
+#ifdef CONFIG_LOCAL_TIMERS
+		show_local_irqs(p, prec);
 #endif
-		seq_printf(p, "Err: %10lu\n", irq_err_count);
+		seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
 	}
 	return 0;
 }
@@ -105,7 +116,8 @@ unlock:
  * come via this function.  Instead, they should provide their
  * own 'handler'
  */
-asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
+asmlinkage void __exception_irq_entry
+asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
@@ -154,13 +166,13 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 
 void __init init_IRQ(void)
 {
-	init_arch_irq();
+	machine_desc->init_irq();
 }
 
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {
-	nr_irqs = arch_nr_irqs ? arch_nr_irqs : NR_IRQS;
+	nr_irqs = machine_desc->nr_irqs ? machine_desc->nr_irqs : NR_IRQS;
 	return nr_irqs;
 }
 #endif
diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S
index b63b528f22a..7fa3bb0d239 100644
--- a/arch/arm/kernel/iwmmxt.S
+++ b/arch/arm/kernel/iwmmxt.S
@@ -19,6 +19,14 @@
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
 
+#if defined(CONFIG_CPU_PJ4)
+#define PJ4(code...)		code
+#define XSC(code...)
+#else
+#define PJ4(code...)
+#define XSC(code...)		code
+#endif
+
 #define MMX_WR0		 	(0x00)
 #define MMX_WR1		 	(0x08)
 #define MMX_WR2		 	(0x10)
@@ -58,11 +66,17 @@
 
 ENTRY(iwmmxt_task_enable)
 
-	mrc	p15, 0, r2, c15, c1, 0
-	tst	r2, #0x3			@ CP0 and CP1 accessible?
+	XSC(mrc	p15, 0, r2, c15, c1, 0)
+	PJ4(mrc p15, 0, r2, c1, c0, 2)
+	@ CP0 and CP1 accessible?
+	XSC(tst	r2, #0x3)
+	PJ4(tst	r2, #0xf)
 	movne	pc, lr				@ if so no business here
-	orr	r2, r2, #0x3			@ enable access to CP0 and CP1
-	mcr	p15, 0, r2, c15, c1, 0
+	@ enable access to CP0 and CP1
+	XSC(orr	r2, r2, #0x3)
+	XSC(mcr	p15, 0, r2, c15, c1, 0)
+	PJ4(orr	r2, r2, #0xf)
+	PJ4(mcr	p15, 0, r2, c1, c0, 2)
 
 	ldr	r3, =concan_owner
 	add	r0, r10, #TI_IWMMXT_STATE	@ get task Concan save area
@@ -179,17 +193,26 @@ ENTRY(iwmmxt_task_disable)
 	teqne	r1, r2				@ or specified one?
 	bne	1f				@ no: quit
 
-	mrc	p15, 0, r4, c15, c1, 0
-	orr	r4, r4, #0x3			@ enable access to CP0 and CP1
-	mcr	p15, 0, r4, c15, c1, 0
+	@ enable access to CP0 and CP1
+	XSC(mrc	p15, 0, r4, c15, c1, 0)
+	XSC(orr	r4, r4, #0xf)
+	XSC(mcr	p15, 0, r4, c15, c1, 0)
+	PJ4(mrc p15, 0, r4, c1, c0, 2)
+	PJ4(orr	r4, r4, #0x3)
+	PJ4(mcr	p15, 0, r4, c1, c0, 2)
+
 	mov	r0, #0				@ nothing to load
 	str	r0, [r3]			@ no more current owner
 	mrc	p15, 0, r2, c2, c0, 0
 	mov	r2, r2				@ cpwait
 	bl	concan_save
 
-	bic	r4, r4, #0x3			@ disable access to CP0 and CP1
-	mcr	p15, 0, r4, c15, c1, 0
+	@ disable access to CP0 and CP1
+	XSC(bic	r4, r4, #0x3)
+	XSC(mcr	p15, 0, r4, c15, c1, 0)
+	PJ4(bic	r4, r4, #0xf)
+	PJ4(mcr	p15, 0, r4, c1, c0, 2)
+
 	mrc	p15, 0, r2, c2, c0, 0
 	mov	r2, r2				@ cpwait
 
@@ -277,8 +300,11 @@ ENTRY(iwmmxt_task_restore)
  */
 ENTRY(iwmmxt_task_switch)
 
-	mrc	p15, 0, r1, c15, c1, 0
-	tst	r1, #0x3			@ CP0 and CP1 accessible?
+	XSC(mrc	p15, 0, r1, c15, c1, 0)
+	PJ4(mrc	p15, 0, r1, c1, c0, 2)
+	@ CP0 and CP1 accessible?
+	XSC(tst	r1, #0x3)
+	PJ4(tst	r1, #0xf)
 	bne	1f				@ yes: block them for next task
 
 	ldr	r2, =concan_owner
@@ -287,8 +313,11 @@ ENTRY(iwmmxt_task_switch)
 	teq	r2, r3				@ next task owns it?
 	movne	pc, lr				@ no: leave Concan disabled
 
-1:	eor	r1, r1, #3			@ flip Concan access
-	mcr	p15, 0, r1, c15, c1, 0
+1:	@ flip Conan access
+	XSC(eor	r1, r1, #0x3)
+	XSC(mcr	p15, 0, r1, c15, c1, 0)
+	PJ4(eor r1, r1, #0xf)
+	PJ4(mcr	p15, 0, r1, c1, c0, 2)
 
 	mrc	p15, 0, r1, c2, c0, 0
 	sub	pc, lr, r1, lsr #32		@ cpwait and return
diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c
index 3a8fd5140d7..30ead135ff5 100644
--- a/arch/arm/kernel/machine_kexec.c
+++ b/arch/arm/kernel/machine_kexec.c
@@ -23,6 +23,8 @@ extern unsigned long kexec_indirection_page;
 extern unsigned long kexec_mach_type;
 extern unsigned long kexec_boot_atags;
 
+static atomic_t waiting_for_crash_ipi;
+
 /*
  * Provide a dummy crash_notes definition while crash dump arrives to arm.
  * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
@@ -37,9 +39,37 @@ void machine_kexec_cleanup(struct kimage *image)
 {
 }
 
+void machine_crash_nonpanic_core(void *unused)
+{
+	struct pt_regs regs;
+
+	crash_setup_regs(&regs, NULL);
+	printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n",
+	       smp_processor_id());
+	crash_save_cpu(&regs, smp_processor_id());
+	flush_cache_all();
+
+	atomic_dec(&waiting_for_crash_ipi);
+	while (1)
+		cpu_relax();
+}
+
 void machine_crash_shutdown(struct pt_regs *regs)
 {
+	unsigned long msecs;
+
 	local_irq_disable();
+
+	atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+	smp_call_function(machine_crash_nonpanic_core, NULL, false);
+	msecs = 1000; /* Wait at most a second for the other cpus to stop */
+	while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
+		mdelay(1);
+		msecs--;
+	}
+	if (atomic_read(&waiting_for_crash_ipi) > 0)
+		printk(KERN_WARNING "Non-crashing CPUs did not react to IPI\n");
+
 	crash_save_cpu(regs, smp_processor_id());
 
 	printk(KERN_INFO "Loading crashdump kernel...\n");
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index d9bd786ce23..0c1bb68ff4a 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -67,35 +67,6 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
 			      char *secstrings,
 			      struct module *mod)
 {
-#ifdef CONFIG_ARM_UNWIND
-	Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
-	struct arm_unwind_mapping *maps = mod->arch.map;
-
-	for (s = sechdrs; s < sechdrs_end; s++) {
-		char const *secname = secstrings + s->sh_name;
-
-		if (strcmp(".ARM.exidx.init.text", secname) == 0)
-			maps[ARM_SEC_INIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx.devinit.text", secname) == 0)
-			maps[ARM_SEC_DEVINIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx", secname) == 0)
-			maps[ARM_SEC_CORE].unw_sec = s;
-		else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
-			maps[ARM_SEC_EXIT].unw_sec = s;
-		else if (strcmp(".ARM.exidx.devexit.text", secname) == 0)
-			maps[ARM_SEC_DEVEXIT].unw_sec = s;
-		else if (strcmp(".init.text", secname) == 0)
-			maps[ARM_SEC_INIT].sec_text = s;
-		else if (strcmp(".devinit.text", secname) == 0)
-			maps[ARM_SEC_DEVINIT].sec_text = s;
-		else if (strcmp(".text", secname) == 0)
-			maps[ARM_SEC_CORE].sec_text = s;
-		else if (strcmp(".exit.text", secname) == 0)
-			maps[ARM_SEC_EXIT].sec_text = s;
-		else if (strcmp(".devexit.text", secname) == 0)
-			maps[ARM_SEC_DEVEXIT].sec_text = s;
-	}
-#endif
 	return 0;
 }
 
@@ -300,41 +271,69 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 	return -ENOEXEC;
 }
 
-#ifdef CONFIG_ARM_UNWIND
-static void register_unwind_tables(struct module *mod)
+struct mod_unwind_map {
+	const Elf_Shdr *unw_sec;
+	const Elf_Shdr *txt_sec;
+};
+
+int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
+		    struct module *mod)
 {
+#ifdef CONFIG_ARM_UNWIND
+	const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+	const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+	struct mod_unwind_map maps[ARM_SEC_MAX];
 	int i;
-	for (i = 0; i < ARM_SEC_MAX; ++i) {
-		struct arm_unwind_mapping *map = &mod->arch.map[i];
-		if (map->unw_sec && map->sec_text)
-			map->unwind = unwind_table_add(map->unw_sec->sh_addr,
-						       map->unw_sec->sh_size,
-						       map->sec_text->sh_addr,
-						       map->sec_text->sh_size);
+
+	memset(maps, 0, sizeof(maps));
+
+	for (s = sechdrs; s < sechdrs_end; s++) {
+		const char *secname = secstrs + s->sh_name;
+
+		if (!(s->sh_flags & SHF_ALLOC))
+			continue;
+
+		if (strcmp(".ARM.exidx.init.text", secname) == 0)
+			maps[ARM_SEC_INIT].unw_sec = s;
+		else if (strcmp(".ARM.exidx.devinit.text", secname) == 0)
+			maps[ARM_SEC_DEVINIT].unw_sec = s;
+		else if (strcmp(".ARM.exidx", secname) == 0)
+			maps[ARM_SEC_CORE].unw_sec = s;
+		else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
+			maps[ARM_SEC_EXIT].unw_sec = s;
+		else if (strcmp(".ARM.exidx.devexit.text", secname) == 0)
+			maps[ARM_SEC_DEVEXIT].unw_sec = s;
+		else if (strcmp(".init.text", secname) == 0)
+			maps[ARM_SEC_INIT].txt_sec = s;
+		else if (strcmp(".devinit.text", secname) == 0)
+			maps[ARM_SEC_DEVINIT].txt_sec = s;
+		else if (strcmp(".text", secname) == 0)
+			maps[ARM_SEC_CORE].txt_sec = s;
+		else if (strcmp(".exit.text", secname) == 0)
+			maps[ARM_SEC_EXIT].txt_sec = s;
+		else if (strcmp(".devexit.text", secname) == 0)
+			maps[ARM_SEC_DEVEXIT].txt_sec = s;
 	}
-}
 
-static void unregister_unwind_tables(struct module *mod)
-{
-	int i = ARM_SEC_MAX;
-	while (--i >= 0)
-		unwind_table_del(mod->arch.map[i].unwind);
-}
-#else
-static inline void register_unwind_tables(struct module *mod) { }
-static inline void unregister_unwind_tables(struct module *mod) { }
+	for (i = 0; i < ARM_SEC_MAX; i++)
+		if (maps[i].unw_sec && maps[i].txt_sec)
+			mod->arch.unwind[i] =
+				unwind_table_add(maps[i].unw_sec->sh_addr,
+					         maps[i].unw_sec->sh_size,
+					         maps[i].txt_sec->sh_addr,
+					         maps[i].txt_sec->sh_size);
 #endif
-
-int
-module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
-		struct module *module)
-{
-	register_unwind_tables(module);
 	return 0;
 }
 
 void
 module_arch_cleanup(struct module *mod)
 {
-	unregister_unwind_tables(mod);
+#ifdef CONFIG_ARM_UNWIND
+	int i;
+
+	for (i = 0; i < ARM_SEC_MAX; i++)
+		if (mod->arch.unwind[i])
+			unwind_table_del(mod->arch.unwind[i]);
+#endif
 }
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 49643b1467e..5efa2647a2f 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -4,9 +4,7 @@
  * ARM performance counter support.
  *
  * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
- *
- * ARMv7 support: Jean Pihet <jpihet@mvista.com>
- * 2010 (c) MontaVista Software, LLC.
+ * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
  *
  * This code is based on the sparc64 perf event code, which is in turn based
  * on the x86 code. Callchain code is based on the ARM OProfile backtrace
@@ -34,7 +32,7 @@ static struct platform_device *pmu_device;
  * Hardware lock to serialize accesses to PMU registers. Needed for the
  * read/modify/write sequences.
  */
-DEFINE_SPINLOCK(pmu_lock);
+static DEFINE_RAW_SPINLOCK(pmu_lock);
 
 /*
  * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
@@ -67,31 +65,25 @@ struct cpu_hw_events {
 	 */
 	unsigned long		active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
 };
-DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-/* PMU names. */
-static const char *arm_pmu_names[] = {
-	[ARM_PERF_PMU_ID_XSCALE1] = "xscale1",
-	[ARM_PERF_PMU_ID_XSCALE2] = "xscale2",
-	[ARM_PERF_PMU_ID_V6]	  = "v6",
-	[ARM_PERF_PMU_ID_V6MP]	  = "v6mpcore",
-	[ARM_PERF_PMU_ID_CA8]	  = "ARMv7 Cortex-A8",
-	[ARM_PERF_PMU_ID_CA9]	  = "ARMv7 Cortex-A9",
-};
+static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
 
 struct arm_pmu {
 	enum arm_perf_pmu_ids id;
+	const char	*name;
 	irqreturn_t	(*handle_irq)(int irq_num, void *dev);
 	void		(*enable)(struct hw_perf_event *evt, int idx);
 	void		(*disable)(struct hw_perf_event *evt, int idx);
-	int		(*event_map)(int evt);
-	u64		(*raw_event)(u64);
 	int		(*get_event_idx)(struct cpu_hw_events *cpuc,
 					 struct hw_perf_event *hwc);
 	u32		(*read_counter)(int idx);
 	void		(*write_counter)(int idx, u32 val);
 	void		(*start)(void);
 	void		(*stop)(void);
+	const unsigned	(*cache_map)[PERF_COUNT_HW_CACHE_MAX]
+				    [PERF_COUNT_HW_CACHE_OP_MAX]
+				    [PERF_COUNT_HW_CACHE_RESULT_MAX];
+	const unsigned	(*event_map)[PERF_COUNT_HW_MAX];
+	u32		raw_event_mask;
 	int		num_events;
 	u64		max_period;
 };
@@ -136,10 +128,6 @@ EXPORT_SYMBOL_GPL(perf_num_counters);
 
 #define CACHE_OP_UNSUPPORTED		0xFFFF
 
-static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-				     [PERF_COUNT_HW_CACHE_OP_MAX]
-				     [PERF_COUNT_HW_CACHE_RESULT_MAX];
-
 static int
 armpmu_map_cache_event(u64 config)
 {
@@ -157,7 +145,7 @@ armpmu_map_cache_event(u64 config)
 	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
 		return -EINVAL;
 
-	ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result];
+	ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result];
 
 	if (ret == CACHE_OP_UNSUPPORTED)
 		return -ENOENT;
@@ -166,6 +154,19 @@ armpmu_map_cache_event(u64 config)
 }
 
 static int
+armpmu_map_event(u64 config)
+{
+	int mapping = (*armpmu->event_map)[config];
+	return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping;
+}
+
+static int
+armpmu_map_raw_event(u64 config)
+{
+	return (int)(config & armpmu->raw_event_mask);
+}
+
+static int
 armpmu_event_set_period(struct perf_event *event,
 			struct hw_perf_event *hwc,
 			int idx)
@@ -458,11 +459,11 @@ __hw_perf_event_init(struct perf_event *event)
 
 	/* Decode the generic type into an ARM event identifier. */
 	if (PERF_TYPE_HARDWARE == event->attr.type) {
-		mapping = armpmu->event_map(event->attr.config);
+		mapping = armpmu_map_event(event->attr.config);
 	} else if (PERF_TYPE_HW_CACHE == event->attr.type) {
 		mapping = armpmu_map_cache_event(event->attr.config);
 	} else if (PERF_TYPE_RAW == event->attr.type) {
-		mapping = armpmu->raw_event(event->attr.config);
+		mapping = armpmu_map_raw_event(event->attr.config);
 	} else {
 		pr_debug("event type %x not supported\n", event->attr.type);
 		return -EOPNOTSUPP;
@@ -603,2366 +604,10 @@ static struct pmu pmu = {
 	.read		= armpmu_read,
 };
 
-/*
- * ARMv6 Performance counter handling code.
- *
- * ARMv6 has 2 configurable performance counters and a single cycle counter.
- * They all share a single reset bit but can be written to zero so we can use
- * that for a reset.
- *
- * The counters can't be individually enabled or disabled so when we remove
- * one event and replace it with another we could get spurious counts from the
- * wrong event. However, we can take advantage of the fact that the
- * performance counters can export events to the event bus, and the event bus
- * itself can be monitored. This requires that we *don't* export the events to
- * the event bus. The procedure for disabling a configurable counter is:
- *	- change the counter to count the ETMEXTOUT[0] signal (0x20). This
- *	  effectively stops the counter from counting.
- *	- disable the counter's interrupt generation (each counter has it's
- *	  own interrupt enable bit).
- * Once stopped, the counter value can be written as 0 to reset.
- *
- * To enable a counter:
- *	- enable the counter's interrupt generation.
- *	- set the new event type.
- *
- * Note: the dedicated cycle counter only counts cycles and can't be
- * enabled/disabled independently of the others. When we want to disable the
- * cycle counter, we have to just disable the interrupt reporting and start
- * ignoring that counter. When re-enabling, we have to reset the value and
- * enable the interrupt.
- */
-
-enum armv6_perf_types {
-	ARMV6_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6_PERFCTR_ITLB_MISS		    = 0x3,
-	ARMV6_PERFCTR_DTLB_MISS		    = 0x4,
-	ARMV6_PERFCTR_BR_EXEC		    = 0x5,
-	ARMV6_PERFCTR_BR_MISPREDICT	    = 0x6,
-	ARMV6_PERFCTR_INSTR_EXEC	    = 0x7,
-	ARMV6_PERFCTR_DCACHE_HIT	    = 0x9,
-	ARMV6_PERFCTR_DCACHE_ACCESS	    = 0xA,
-	ARMV6_PERFCTR_DCACHE_MISS	    = 0xB,
-	ARMV6_PERFCTR_DCACHE_WBACK	    = 0xC,
-	ARMV6_PERFCTR_SW_PC_CHANGE	    = 0xD,
-	ARMV6_PERFCTR_MAIN_TLB_MISS	    = 0xF,
-	ARMV6_PERFCTR_EXPL_D_ACCESS	    = 0x10,
-	ARMV6_PERFCTR_LSU_FULL_STALL	    = 0x11,
-	ARMV6_PERFCTR_WBUF_DRAINED	    = 0x12,
-	ARMV6_PERFCTR_CPU_CYCLES	    = 0xFF,
-	ARMV6_PERFCTR_NOP		    = 0x20,
-};
-
-enum armv6_counters {
-	ARMV6_CYCLE_COUNTER = 1,
-	ARMV6_COUNTER0,
-	ARMV6_COUNTER1,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * The ARM performance counters can count micro DTLB misses,
-		 * micro ITLB misses and main TLB misses. There isn't an event
-		 * for TLB misses, so use the micro misses here and if users
-		 * want the main TLB misses they can use a raw counter.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-enum armv6mpcore_perf_types {
-	ARMV6MPCORE_PERFCTR_ICACHE_MISS	    = 0x0,
-	ARMV6MPCORE_PERFCTR_IBUF_STALL	    = 0x1,
-	ARMV6MPCORE_PERFCTR_DDEP_STALL	    = 0x2,
-	ARMV6MPCORE_PERFCTR_ITLB_MISS	    = 0x3,
-	ARMV6MPCORE_PERFCTR_DTLB_MISS	    = 0x4,
-	ARMV6MPCORE_PERFCTR_BR_EXEC	    = 0x5,
-	ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
-	ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
-	ARMV6MPCORE_PERFCTR_INSTR_EXEC	    = 0x8,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
-	ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
-	ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
-	ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
-	ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
-	ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
-	ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
-	ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
-	ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
-	ARMV6MPCORE_PERFCTR_CPU_CYCLES	    = 0xFF,
-};
-
-/*
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					[PERF_COUNT_HW_CACHE_OP_MAX]
-					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  =
-				ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
-			[C(RESULT_MISS)]    =
-				ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  =
-				ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
-			[C(RESULT_MISS)]    =
-				ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * The ARM performance counters can count micro DTLB misses,
-		 * micro ITLB misses and main TLB misses. There isn't an event
-		 * for TLB misses, so use the micro misses here and if users
-		 * want the main TLB misses they can use a raw counter.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-static inline unsigned long
-armv6_pmcr_read(void)
-{
-	u32 val;
-	asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
-	return val;
-}
-
-static inline void
-armv6_pmcr_write(unsigned long val)
-{
-	asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
-}
-
-#define ARMV6_PMCR_ENABLE		(1 << 0)
-#define ARMV6_PMCR_CTR01_RESET		(1 << 1)
-#define ARMV6_PMCR_CCOUNT_RESET		(1 << 2)
-#define ARMV6_PMCR_CCOUNT_DIV		(1 << 3)
-#define ARMV6_PMCR_COUNT0_IEN		(1 << 4)
-#define ARMV6_PMCR_COUNT1_IEN		(1 << 5)
-#define ARMV6_PMCR_CCOUNT_IEN		(1 << 6)
-#define ARMV6_PMCR_COUNT0_OVERFLOW	(1 << 8)
-#define ARMV6_PMCR_COUNT1_OVERFLOW	(1 << 9)
-#define ARMV6_PMCR_CCOUNT_OVERFLOW	(1 << 10)
-#define ARMV6_PMCR_EVT_COUNT0_SHIFT	20
-#define ARMV6_PMCR_EVT_COUNT0_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
-#define ARMV6_PMCR_EVT_COUNT1_SHIFT	12
-#define ARMV6_PMCR_EVT_COUNT1_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
-
-#define ARMV6_PMCR_OVERFLOWED_MASK \
-	(ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
-	 ARMV6_PMCR_CCOUNT_OVERFLOW)
-
-static inline int
-armv6_pmcr_has_overflowed(unsigned long pmcr)
-{
-	return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK);
-}
-
-static inline int
-armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
-				  enum armv6_counters counter)
-{
-	int ret = 0;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
-	else if (ARMV6_COUNTER0 == counter)
-		ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
-	else if (ARMV6_COUNTER1 == counter)
-		ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
-	return ret;
-}
-
-static inline u32
-armv6pmu_read_counter(int counter)
-{
-	unsigned long value = 0;
-
-	if (ARMV6_CYCLE_COUNTER == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
-	else if (ARMV6_COUNTER0 == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
-	else if (ARMV6_COUNTER1 == counter)
-		asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-
-	return value;
-}
-
-static inline void
-armv6pmu_write_counter(int counter,
-		       u32 value)
-{
-	if (ARMV6_CYCLE_COUNTER == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
-	else if (ARMV6_COUNTER0 == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
-	else if (ARMV6_COUNTER1 == counter)
-		asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
-	else
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-}
-
-void
-armv6pmu_enable_event(struct hw_perf_event *hwc,
-		      int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= 0;
-		evt	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_EVT_COUNT0_MASK;
-		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
-			  ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_EVT_COUNT1_MASK;
-		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
-			  ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Mask out the current event and set the counter to count the event
-	 * that we're interested in.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static irqreturn_t
-armv6pmu_handle_irq(int irq_num,
-		    void *dev)
-{
-	unsigned long pmcr = armv6_pmcr_read();
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	if (!armv6_pmcr_has_overflowed(pmcr))
-		return IRQ_NONE;
-
-	regs = get_irq_regs();
-
-	/*
-	 * The interrupts are cleared by writing the overflow flags back to
-	 * the control register. All of the other bits don't have any effect
-	 * if they are rewritten, so write the whole value back.
-	 */
-	armv6_pmcr_write(pmcr);
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static void
-armv6pmu_start(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val |= ARMV6_PMCR_ENABLE;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-void
-armv6pmu_stop(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~ARMV6_PMCR_ENABLE;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline int
-armv6pmu_event_map(int config)
-{
-	int mapping = armv6_perf_map[config];
-	if (HW_OP_UNSUPPORTED == mapping)
-		mapping = -EOPNOTSUPP;
-	return mapping;
-}
-
-static inline int
-armv6mpcore_pmu_event_map(int config)
-{
-	int mapping = armv6mpcore_perf_map[config];
-	if (HW_OP_UNSUPPORTED == mapping)
-		mapping = -EOPNOTSUPP;
-	return mapping;
-}
-
-static u64
-armv6pmu_raw_event(u64 config)
-{
-	return config & 0xff;
-}
-
-static int
-armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
-		       struct hw_perf_event *event)
-{
-	/* Always place a cycle counter into the cycle counter. */
-	if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
-		if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return ARMV6_CYCLE_COUNTER;
-	} else {
-		/*
-		 * For anything other than a cycle counter, try and use
-		 * counter0 and counter1.
-		 */
-		if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) {
-			return ARMV6_COUNTER1;
-		}
-
-		if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) {
-			return ARMV6_COUNTER0;
-		}
-
-		/* The counters are all in use. */
-		return -EAGAIN;
-	}
-}
-
-static void
-armv6pmu_disable_event(struct hw_perf_event *hwc,
-		       int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-		evt	= 0;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
-		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
-		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Mask out the current event and set the counter to count the number
-	 * of ETM bus signal assertion cycles. The external reporting should
-	 * be disabled and so this should never increment.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
-			      int idx)
-{
-	unsigned long val, mask, flags, evt = 0;
-
-	if (ARMV6_CYCLE_COUNTER == idx) {
-		mask	= ARMV6_PMCR_CCOUNT_IEN;
-	} else if (ARMV6_COUNTER0 == idx) {
-		mask	= ARMV6_PMCR_COUNT0_IEN;
-	} else if (ARMV6_COUNTER1 == idx) {
-		mask	= ARMV6_PMCR_COUNT1_IEN;
-	} else {
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	/*
-	 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
-	 * simply disable the interrupt reporting.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = armv6_pmcr_read();
-	val &= ~mask;
-	val |= evt;
-	armv6_pmcr_write(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static const struct arm_pmu armv6pmu = {
-	.id			= ARM_PERF_PMU_ID_V6,
-	.handle_irq		= armv6pmu_handle_irq,
-	.enable			= armv6pmu_enable_event,
-	.disable		= armv6pmu_disable_event,
-	.event_map		= armv6pmu_event_map,
-	.raw_event		= armv6pmu_raw_event,
-	.read_counter		= armv6pmu_read_counter,
-	.write_counter		= armv6pmu_write_counter,
-	.get_event_idx		= armv6pmu_get_event_idx,
-	.start			= armv6pmu_start,
-	.stop			= armv6pmu_stop,
-	.num_events		= 3,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-/*
- * ARMv6mpcore is almost identical to single core ARMv6 with the exception
- * that some of the events have different enumerations and that there is no
- * *hack* to stop the programmable counters. To stop the counters we simply
- * disable the interrupt reporting and update the event. When unthrottling we
- * reset the period and enable the interrupt reporting.
- */
-static const struct arm_pmu armv6mpcore_pmu = {
-	.id			= ARM_PERF_PMU_ID_V6MP,
-	.handle_irq		= armv6pmu_handle_irq,
-	.enable			= armv6pmu_enable_event,
-	.disable		= armv6mpcore_pmu_disable_event,
-	.event_map		= armv6mpcore_pmu_event_map,
-	.raw_event		= armv6pmu_raw_event,
-	.read_counter		= armv6pmu_read_counter,
-	.write_counter		= armv6pmu_write_counter,
-	.get_event_idx		= armv6pmu_get_event_idx,
-	.start			= armv6pmu_start,
-	.stop			= armv6pmu_stop,
-	.num_events		= 3,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-/*
- * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
- *
- * Copied from ARMv6 code, with the low level code inspired
- *  by the ARMv7 Oprofile code.
- *
- * Cortex-A8 has up to 4 configurable performance counters and
- *  a single cycle counter.
- * Cortex-A9 has up to 31 configurable performance counters and
- *  a single cycle counter.
- *
- * All counters can be enabled/disabled and IRQ masked separately. The cycle
- *  counter and all 4 performance counters together can be reset separately.
- */
-
-/* Common ARMv7 event types */
-enum armv7_perf_types {
-	ARMV7_PERFCTR_PMNC_SW_INCR		= 0x00,
-	ARMV7_PERFCTR_IFETCH_MISS		= 0x01,
-	ARMV7_PERFCTR_ITLB_MISS			= 0x02,
-	ARMV7_PERFCTR_DCACHE_REFILL		= 0x03,
-	ARMV7_PERFCTR_DCACHE_ACCESS		= 0x04,
-	ARMV7_PERFCTR_DTLB_REFILL		= 0x05,
-	ARMV7_PERFCTR_DREAD			= 0x06,
-	ARMV7_PERFCTR_DWRITE			= 0x07,
-
-	ARMV7_PERFCTR_EXC_TAKEN			= 0x09,
-	ARMV7_PERFCTR_EXC_EXECUTED		= 0x0A,
-	ARMV7_PERFCTR_CID_WRITE			= 0x0B,
-	/* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
-	 * It counts:
-	 *  - all branch instructions,
-	 *  - instructions that explicitly write the PC,
-	 *  - exception generating instructions.
-	 */
-	ARMV7_PERFCTR_PC_WRITE			= 0x0C,
-	ARMV7_PERFCTR_PC_IMM_BRANCH		= 0x0D,
-	ARMV7_PERFCTR_UNALIGNED_ACCESS		= 0x0F,
-	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED	= 0x10,
-	ARMV7_PERFCTR_CLOCK_CYCLES		= 0x11,
-
-	ARMV7_PERFCTR_PC_BRANCH_MIS_USED	= 0x12,
-
-	ARMV7_PERFCTR_CPU_CYCLES		= 0xFF
-};
-
-/* ARMv7 Cortex-A8 specific event types */
-enum armv7_a8_perf_types {
-	ARMV7_PERFCTR_INSTR_EXECUTED		= 0x08,
-
-	ARMV7_PERFCTR_PC_PROC_RETURN		= 0x0E,
-
-	ARMV7_PERFCTR_WRITE_BUFFER_FULL		= 0x40,
-	ARMV7_PERFCTR_L2_STORE_MERGED		= 0x41,
-	ARMV7_PERFCTR_L2_STORE_BUFF		= 0x42,
-	ARMV7_PERFCTR_L2_ACCESS			= 0x43,
-	ARMV7_PERFCTR_L2_CACH_MISS		= 0x44,
-	ARMV7_PERFCTR_AXI_READ_CYCLES		= 0x45,
-	ARMV7_PERFCTR_AXI_WRITE_CYCLES		= 0x46,
-	ARMV7_PERFCTR_MEMORY_REPLAY		= 0x47,
-	ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY	= 0x48,
-	ARMV7_PERFCTR_L1_DATA_MISS		= 0x49,
-	ARMV7_PERFCTR_L1_INST_MISS		= 0x4A,
-	ARMV7_PERFCTR_L1_DATA_COLORING		= 0x4B,
-	ARMV7_PERFCTR_L1_NEON_DATA		= 0x4C,
-	ARMV7_PERFCTR_L1_NEON_CACH_DATA		= 0x4D,
-	ARMV7_PERFCTR_L2_NEON			= 0x4E,
-	ARMV7_PERFCTR_L2_NEON_HIT		= 0x4F,
-	ARMV7_PERFCTR_L1_INST			= 0x50,
-	ARMV7_PERFCTR_PC_RETURN_MIS_PRED	= 0x51,
-	ARMV7_PERFCTR_PC_BRANCH_FAILED		= 0x52,
-	ARMV7_PERFCTR_PC_BRANCH_TAKEN		= 0x53,
-	ARMV7_PERFCTR_PC_BRANCH_EXECUTED	= 0x54,
-	ARMV7_PERFCTR_OP_EXECUTED		= 0x55,
-	ARMV7_PERFCTR_CYCLES_INST_STALL		= 0x56,
-	ARMV7_PERFCTR_CYCLES_INST		= 0x57,
-	ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL	= 0x58,
-	ARMV7_PERFCTR_CYCLES_NEON_INST_STALL	= 0x59,
-	ARMV7_PERFCTR_NEON_CYCLES		= 0x5A,
-
-	ARMV7_PERFCTR_PMU0_EVENTS		= 0x70,
-	ARMV7_PERFCTR_PMU1_EVENTS		= 0x71,
-	ARMV7_PERFCTR_PMU_EVENTS		= 0x72,
-};
-
-/* ARMv7 Cortex-A9 specific event types */
-enum armv7_a9_perf_types {
-	ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC	= 0x40,
-	ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC	= 0x41,
-	ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC	= 0x42,
-
-	ARMV7_PERFCTR_COHERENT_LINE_MISS	= 0x50,
-	ARMV7_PERFCTR_COHERENT_LINE_HIT		= 0x51,
-
-	ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES	= 0x60,
-	ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES	= 0x61,
-	ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES	= 0x62,
-	ARMV7_PERFCTR_STREX_EXECUTED_PASSED	= 0x63,
-	ARMV7_PERFCTR_STREX_EXECUTED_FAILED	= 0x64,
-	ARMV7_PERFCTR_DATA_EVICTION		= 0x65,
-	ARMV7_PERFCTR_ISSUE_STAGE_NO_INST	= 0x66,
-	ARMV7_PERFCTR_ISSUE_STAGE_EMPTY		= 0x67,
-	ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE	= 0x68,
-
-	ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS	= 0x6E,
-
-	ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST	= 0x70,
-	ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST	= 0x71,
-	ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST	= 0x72,
-	ARMV7_PERFCTR_FP_EXECUTED_INST		= 0x73,
-	ARMV7_PERFCTR_NEON_EXECUTED_INST	= 0x74,
-
-	ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES	= 0x80,
-	ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES	= 0x81,
-	ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES	= 0x82,
-	ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES	= 0x83,
-	ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES	= 0x84,
-	ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES 	= 0x85,
-	ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES	= 0x86,
-
-	ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES	= 0x8A,
-	ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES	= 0x8B,
-
-	ARMV7_PERFCTR_ISB_INST			= 0x90,
-	ARMV7_PERFCTR_DSB_INST			= 0x91,
-	ARMV7_PERFCTR_DMB_INST			= 0x92,
-	ARMV7_PERFCTR_EXT_INTERRUPTS		= 0x93,
-
-	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED	= 0xA0,
-	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED	= 0xA1,
-	ARMV7_PERFCTR_PLE_FIFO_FLUSH		= 0xA2,
-	ARMV7_PERFCTR_PLE_RQST_COMPLETED	= 0xA3,
-	ARMV7_PERFCTR_PLE_FIFO_OVERFLOW		= 0xA4,
-	ARMV7_PERFCTR_PLE_RQST_PROG		= 0xA5
-};
-
-/*
- * Cortex-A8 HW events mapping
- *
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * Only ITLB misses and DTLB refills are supported.
-		 * If users want the DTLB refills misses a raw counter
-		 * must be used.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Cortex-A9 HW events mapping
- */
-static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    =
-					ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_COHERENT_LINE_HIT,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_COHERENT_LINE_MISS,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
-};
-
-static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					  [PERF_COUNT_HW_CACHE_OP_MAX]
-					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		/*
-		 * The performance counters don't differentiate between read
-		 * and write accesses/misses so this isn't strictly correct,
-		 * but it's the best we can do. Writes and reads get
-		 * combined.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		/*
-		 * Only ITLB misses and DTLB refills are supported.
-		 * If users want the DTLB refills misses a raw counter
-		 * must be used.
-		 */
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
-			[C(RESULT_MISS)]
-					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-/*
- * Perf Events counters
- */
-enum armv7_counters {
-	ARMV7_CYCLE_COUNTER 		= 1,	/* Cycle counter */
-	ARMV7_COUNTER0			= 2,	/* First event counter */
-};
-
-/*
- * The cycle counter is ARMV7_CYCLE_COUNTER.
- * The first event counter is ARMV7_COUNTER0.
- * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
- */
-#define	ARMV7_COUNTER_LAST	(ARMV7_COUNTER0 + armpmu->num_events - 1)
-
-/*
- * ARMv7 low level PMNC access
- */
-
-/*
- * Per-CPU PMNC: config reg
- */
-#define ARMV7_PMNC_E		(1 << 0) /* Enable all counters */
-#define ARMV7_PMNC_P		(1 << 1) /* Reset all counters */
-#define ARMV7_PMNC_C		(1 << 2) /* Cycle counter reset */
-#define ARMV7_PMNC_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
-#define ARMV7_PMNC_X		(1 << 4) /* Export to ETM */
-#define ARMV7_PMNC_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
-#define	ARMV7_PMNC_N_SHIFT	11	 /* Number of counters supported */
-#define	ARMV7_PMNC_N_MASK	0x1f
-#define	ARMV7_PMNC_MASK		0x3f	 /* Mask for writable bits */
-
-/*
- * Available counters
- */
-#define ARMV7_CNT0 		0	/* First event counter */
-#define ARMV7_CCNT 		31	/* Cycle counter */
-
-/* Perf Event to low level counters mapping */
-#define ARMV7_EVENT_CNT_TO_CNTx	(ARMV7_COUNTER0 - ARMV7_CNT0)
-
-/*
- * CNTENS: counters enable reg
- */
-#define ARMV7_CNTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENS_C		(1 << ARMV7_CCNT)
-
-/*
- * CNTENC: counters disable reg
- */
-#define ARMV7_CNTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENC_C		(1 << ARMV7_CCNT)
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define ARMV7_INTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENS_C		(1 << ARMV7_CCNT)
-
-/*
- * INTENC: counters overflow interrupt disable reg
- */
-#define ARMV7_INTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENC_C		(1 << ARMV7_CCNT)
-
-/*
- * EVTSEL: Event selection reg
- */
-#define	ARMV7_EVTSEL_MASK	0xff		/* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define	ARMV7_SELECT_MASK	0x1f		/* Mask for writable bits */
-
-/*
- * FLAG: counters overflow flag status reg
- */
-#define ARMV7_FLAG_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_FLAG_C		(1 << ARMV7_CCNT)
-#define	ARMV7_FLAG_MASK		0xffffffff	/* Mask for writable bits */
-#define	ARMV7_OVERFLOWED_MASK	ARMV7_FLAG_MASK
-
-static inline unsigned long armv7_pmnc_read(void)
-{
-	u32 val;
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
-	return val;
-}
-
-static inline void armv7_pmnc_write(unsigned long val)
-{
-	val &= ARMV7_PMNC_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
-}
-
-static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
-{
-	return pmnc & ARMV7_OVERFLOWED_MASK;
-}
-
-static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
-					enum armv7_counters counter)
-{
-	int ret;
-
-	if (counter == ARMV7_CYCLE_COUNTER)
-		ret = pmnc & ARMV7_FLAG_C;
-	else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
-		ret = pmnc & ARMV7_FLAG_P(counter);
-	else
-		pr_err("CPU%u checking wrong counter %d overflow status\n",
-			smp_processor_id(), counter);
-
-	return ret;
-}
-
-static inline int armv7_pmnc_select_counter(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
-		pr_err("CPU%u selecting wrong PMNC counter"
-			" %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7pmu_read_counter(int idx)
-{
-	unsigned long value = 0;
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
-	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
-		if (armv7_pmnc_select_counter(idx) == idx)
-			asm volatile("mrc p15, 0, %0, c9, c13, 2"
-				     : "=r" (value));
-	} else
-		pr_err("CPU%u reading wrong counter %d\n",
-			smp_processor_id(), idx);
-
-	return value;
-}
-
-static inline void armv7pmu_write_counter(int idx, u32 value)
-{
-	if (idx == ARMV7_CYCLE_COUNTER)
-		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
-	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
-		if (armv7_pmnc_select_counter(idx) == idx)
-			asm volatile("mcr p15, 0, %0, c9, c13, 2"
-				     : : "r" (value));
-	} else
-		pr_err("CPU%u writing wrong counter %d\n",
-			smp_processor_id(), idx);
-}
-
-static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
-{
-	if (armv7_pmnc_select_counter(idx) == idx) {
-		val &= ARMV7_EVTSEL_MASK;
-		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
-	}
-}
-
-static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u enabling wrong PMNC counter"
-			" %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_CNTENS_C;
-	else
-		val = ARMV7_CNTENS_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
-{
-	u32 val;
-
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u disabling wrong PMNC counter"
-			" %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_CNTENC_C;
-	else
-		val = ARMV7_CNTENC_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u enabling wrong PMNC counter"
-			" interrupt enable %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_INTENS_C;
-	else
-		val = ARMV7_INTENS_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
-{
-	u32 val;
-
-	if ((idx != ARMV7_CYCLE_COUNTER) &&
-	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
-		pr_err("CPU%u disabling wrong PMNC counter"
-			" interrupt enable %d\n", smp_processor_id(), idx);
-		return -1;
-	}
-
-	if (idx == ARMV7_CYCLE_COUNTER)
-		val = ARMV7_INTENC_C;
-	else
-		val = ARMV7_INTENC_P(idx);
-
-	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
-
-	return idx;
-}
-
-static inline u32 armv7_pmnc_getreset_flags(void)
-{
-	u32 val;
-
-	/* Read */
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-
-	/* Write to clear flags */
-	val &= ARMV7_FLAG_MASK;
-	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
-
-	return val;
-}
-
-#ifdef DEBUG
-static void armv7_pmnc_dump_regs(void)
-{
-	u32 val;
-	unsigned int cnt;
-
-	printk(KERN_INFO "PMNC registers dump:\n");
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
-	printk(KERN_INFO "PMNC  =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
-	printk(KERN_INFO "CNTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
-	printk(KERN_INFO "INTENS=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
-	printk(KERN_INFO "FLAGS =0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
-	printk(KERN_INFO "SELECT=0x%08x\n", val);
-
-	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
-	printk(KERN_INFO "CCNT  =0x%08x\n", val);
-
-	for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
-		armv7_pmnc_select_counter(cnt);
-		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] count =0x%08x\n",
-			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
-		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
-		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
-			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
-	}
-}
-#endif
-
-void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags;
-
-	/*
-	 * Enable counter and interrupt, and set the counter to count
-	 * the event that we're interested in.
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Set event (if destined for PMNx counters)
-	 * We don't need to set the event if it's a cycle count
-	 */
-	if (idx != ARMV7_CYCLE_COUNTER)
-		armv7_pmnc_write_evtsel(idx, hwc->config_base);
-
-	/*
-	 * Enable interrupt for this counter
-	 */
-	armv7_pmnc_enable_intens(idx);
-
-	/*
-	 * Enable counter
-	 */
-	armv7_pmnc_enable_counter(idx);
-
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags;
-
-	/*
-	 * Disable counter and interrupt
-	 */
-	spin_lock_irqsave(&pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	armv7_pmnc_disable_counter(idx);
-
-	/*
-	 * Disable interrupt for this counter
-	 */
-	armv7_pmnc_disable_intens(idx);
-
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc;
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * Get and reset the IRQ flags
-	 */
-	pmnc = armv7_pmnc_getreset_flags();
-
-	/*
-	 * Did an overflow occur?
-	 */
-	if (!armv7_pmnc_has_overflowed(pmnc))
-		return IRQ_NONE;
-
-	/*
-	 * Handle the counter(s) overflow(s)
-	 */
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static void armv7pmu_start(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	/* Enable all counters */
-	armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void armv7pmu_stop(void)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	/* Disable all counters */
-	armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline int armv7_a8_pmu_event_map(int config)
-{
-	int mapping = armv7_a8_perf_map[config];
-	if (HW_OP_UNSUPPORTED == mapping)
-		mapping = -EOPNOTSUPP;
-	return mapping;
-}
-
-static inline int armv7_a9_pmu_event_map(int config)
-{
-	int mapping = armv7_a9_perf_map[config];
-	if (HW_OP_UNSUPPORTED == mapping)
-		mapping = -EOPNOTSUPP;
-	return mapping;
-}
-
-static u64 armv7pmu_raw_event(u64 config)
-{
-	return config & 0xff;
-}
-
-static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
-				  struct hw_perf_event *event)
-{
-	int idx;
-
-	/* Always place a cycle counter into the cycle counter. */
-	if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
-		if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return ARMV7_CYCLE_COUNTER;
-	} else {
-		/*
-		 * For anything other than a cycle counter, try and use
-		 * the events counters
-		 */
-		for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
-			if (!test_and_set_bit(idx, cpuc->used_mask))
-				return idx;
-		}
-
-		/* The counters are all in use. */
-		return -EAGAIN;
-	}
-}
-
-static struct arm_pmu armv7pmu = {
-	.handle_irq		= armv7pmu_handle_irq,
-	.enable			= armv7pmu_enable_event,
-	.disable		= armv7pmu_disable_event,
-	.raw_event		= armv7pmu_raw_event,
-	.read_counter		= armv7pmu_read_counter,
-	.write_counter		= armv7pmu_write_counter,
-	.get_event_idx		= armv7pmu_get_event_idx,
-	.start			= armv7pmu_start,
-	.stop			= armv7pmu_stop,
-	.max_period		= (1LLU << 32) - 1,
-};
-
-static u32 __init armv7_reset_read_pmnc(void)
-{
-	u32 nb_cnt;
-
-	/* Initialize & Reset PMNC: C and P bits */
-	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
-
-	/* Read the nb of CNTx counters supported from PMNC */
-	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
-
-	/* Add the CPU cycles counter and return */
-	return nb_cnt + 1;
-}
-
-/*
- * ARMv5 [xscale] Performance counter handling code.
- *
- * Based on xscale OProfile code.
- *
- * There are two variants of the xscale PMU that we support:
- * 	- xscale1pmu: 2 event counters and a cycle counter
- * 	- xscale2pmu: 4 event counters and a cycle counter
- * The two variants share event definitions, but have different
- * PMU structures.
- */
-
-enum xscale_perf_types {
-	XSCALE_PERFCTR_ICACHE_MISS		= 0x00,
-	XSCALE_PERFCTR_ICACHE_NO_DELIVER	= 0x01,
-	XSCALE_PERFCTR_DATA_STALL		= 0x02,
-	XSCALE_PERFCTR_ITLB_MISS		= 0x03,
-	XSCALE_PERFCTR_DTLB_MISS		= 0x04,
-	XSCALE_PERFCTR_BRANCH			= 0x05,
-	XSCALE_PERFCTR_BRANCH_MISS		= 0x06,
-	XSCALE_PERFCTR_INSTRUCTION		= 0x07,
-	XSCALE_PERFCTR_DCACHE_FULL_STALL	= 0x08,
-	XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG	= 0x09,
-	XSCALE_PERFCTR_DCACHE_ACCESS		= 0x0A,
-	XSCALE_PERFCTR_DCACHE_MISS		= 0x0B,
-	XSCALE_PERFCTR_DCACHE_WRITE_BACK	= 0x0C,
-	XSCALE_PERFCTR_PC_CHANGED		= 0x0D,
-	XSCALE_PERFCTR_BCU_REQUEST		= 0x10,
-	XSCALE_PERFCTR_BCU_FULL			= 0x11,
-	XSCALE_PERFCTR_BCU_DRAIN		= 0x12,
-	XSCALE_PERFCTR_BCU_ECC_NO_ELOG		= 0x14,
-	XSCALE_PERFCTR_BCU_1_BIT_ERR		= 0x15,
-	XSCALE_PERFCTR_RMW			= 0x16,
-	/* XSCALE_PERFCTR_CCNT is not hardware defined */
-	XSCALE_PERFCTR_CCNT			= 0xFE,
-	XSCALE_PERFCTR_UNUSED			= 0xFF,
-};
-
-enum xscale_counters {
-	XSCALE_CYCLE_COUNTER	= 1,
-	XSCALE_COUNTER0,
-	XSCALE_COUNTER1,
-	XSCALE_COUNTER2,
-	XSCALE_COUNTER3,
-};
-
-static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]	    = XSCALE_PERFCTR_CCNT,
-	[PERF_COUNT_HW_INSTRUCTIONS]	    = XSCALE_PERFCTR_INSTRUCTION,
-	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
-	[PERF_COUNT_HW_BRANCH_MISSES]	    = XSCALE_PERFCTR_BRANCH_MISS,
-	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
-};
-
-static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-					   [PERF_COUNT_HW_CACHE_OP_MAX]
-					   [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(L1I)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(LL)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(DTLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(ITLB)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-	[C(BPU)] = {
-		[C(OP_READ)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_WRITE)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-		[C(OP_PREFETCH)] = {
-			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
-			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
-		},
-	},
-};
-
-#define	XSCALE_PMU_ENABLE	0x001
-#define XSCALE_PMN_RESET	0x002
-#define	XSCALE_CCNT_RESET	0x004
-#define	XSCALE_PMU_RESET	(CCNT_RESET | PMN_RESET)
-#define XSCALE_PMU_CNT64	0x008
-
-static inline int
-xscalepmu_event_map(int config)
-{
-	int mapping = xscale_perf_map[config];
-	if (HW_OP_UNSUPPORTED == mapping)
-		mapping = -EOPNOTSUPP;
-	return mapping;
-}
-
-static u64
-xscalepmu_raw_event(u64 config)
-{
-	return config & 0xff;
-}
-
-#define XSCALE1_OVERFLOWED_MASK	0x700
-#define XSCALE1_CCOUNT_OVERFLOW	0x400
-#define XSCALE1_COUNT0_OVERFLOW	0x100
-#define XSCALE1_COUNT1_OVERFLOW	0x200
-#define XSCALE1_CCOUNT_INT_EN	0x040
-#define XSCALE1_COUNT0_INT_EN	0x010
-#define XSCALE1_COUNT1_INT_EN	0x020
-#define XSCALE1_COUNT0_EVT_SHFT	12
-#define XSCALE1_COUNT0_EVT_MASK	(0xff << XSCALE1_COUNT0_EVT_SHFT)
-#define XSCALE1_COUNT1_EVT_SHFT	20
-#define XSCALE1_COUNT1_EVT_MASK	(0xff << XSCALE1_COUNT1_EVT_SHFT)
-
-static inline u32
-xscale1pmu_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale1pmu_write_pmnc(u32 val)
-{
-	/* upper 4bits and 7, 11 are write-as-0 */
-	val &= 0xffff77f;
-	asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
-}
-
-static inline int
-xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
-					enum xscale_counters counter)
-{
-	int ret = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-	}
-
-	return ret;
-}
-
-static irqreturn_t
-xscale1pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc;
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/*
-	 * NOTE: there's an A stepping erratum that states if an overflow
-	 *       bit already exists and another occurs, the previous
-	 *       Overflow bit gets cleared. There's no workaround.
-	 *	 Fixed in B stepping or later.
-	 */
-	pmnc = xscale1pmu_read_pmnc();
-
-	/*
-	 * Write the value back to clear the overflow flags. Overflow
-	 * flags remain in pmnc for use below. We also disable the PMU
-	 * while we process the interrupt.
-	 */
-	xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
-	if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
-		return IRQ_NONE;
-
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	irq_work_run();
-
-	/*
-	 * Re-enable the PMU.
-	 */
-	pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void
-xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		mask = 0;
-		evt = XSCALE1_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		mask = XSCALE1_COUNT0_EVT_MASK;
-		evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
-			XSCALE1_COUNT0_INT_EN;
-		break;
-	case XSCALE_COUNTER1:
-		mask = XSCALE1_COUNT1_EVT_MASK;
-		evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
-			XSCALE1_COUNT1_INT_EN;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~mask;
-	val |= evt;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long val, mask, evt, flags;
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		mask = XSCALE1_CCOUNT_INT_EN;
-		evt = 0;
-		break;
-	case XSCALE_COUNTER0:
-		mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
-		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
-		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~mask;
-	val |= evt;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
-			struct hw_perf_event *event)
-{
-	if (XSCALE_PERFCTR_CCNT == event->config_base) {
-		if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
-			return -EAGAIN;
-
-		return XSCALE_CYCLE_COUNTER;
-	} else {
-		if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) {
-			return XSCALE_COUNTER1;
-		}
-
-		if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) {
-			return XSCALE_COUNTER0;
-		}
-
-		return -EAGAIN;
-	}
-}
-
-static void
-xscale1pmu_start(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val |= XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale1pmu_stop(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale1pmu_read_pmnc();
-	val &= ~XSCALE_PMU_ENABLE;
-	xscale1pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline u32
-xscale1pmu_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
-		break;
-	}
-
-	return val;
-}
-
-static inline void
-xscale1pmu_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
-		break;
-	}
-}
-
-static const struct arm_pmu xscale1pmu = {
-	.id		= ARM_PERF_PMU_ID_XSCALE1,
-	.handle_irq	= xscale1pmu_handle_irq,
-	.enable		= xscale1pmu_enable_event,
-	.disable	= xscale1pmu_disable_event,
-	.event_map	= xscalepmu_event_map,
-	.raw_event	= xscalepmu_raw_event,
-	.read_counter	= xscale1pmu_read_counter,
-	.write_counter	= xscale1pmu_write_counter,
-	.get_event_idx	= xscale1pmu_get_event_idx,
-	.start		= xscale1pmu_start,
-	.stop		= xscale1pmu_stop,
-	.num_events	= 3,
-	.max_period	= (1LLU << 32) - 1,
-};
-
-#define XSCALE2_OVERFLOWED_MASK	0x01f
-#define XSCALE2_CCOUNT_OVERFLOW	0x001
-#define XSCALE2_COUNT0_OVERFLOW	0x002
-#define XSCALE2_COUNT1_OVERFLOW	0x004
-#define XSCALE2_COUNT2_OVERFLOW	0x008
-#define XSCALE2_COUNT3_OVERFLOW	0x010
-#define XSCALE2_CCOUNT_INT_EN	0x001
-#define XSCALE2_COUNT0_INT_EN	0x002
-#define XSCALE2_COUNT1_INT_EN	0x004
-#define XSCALE2_COUNT2_INT_EN	0x008
-#define XSCALE2_COUNT3_INT_EN	0x010
-#define XSCALE2_COUNT0_EVT_SHFT	0
-#define XSCALE2_COUNT0_EVT_MASK	(0xff << XSCALE2_COUNT0_EVT_SHFT)
-#define XSCALE2_COUNT1_EVT_SHFT	8
-#define XSCALE2_COUNT1_EVT_MASK	(0xff << XSCALE2_COUNT1_EVT_SHFT)
-#define XSCALE2_COUNT2_EVT_SHFT	16
-#define XSCALE2_COUNT2_EVT_MASK	(0xff << XSCALE2_COUNT2_EVT_SHFT)
-#define XSCALE2_COUNT3_EVT_SHFT	24
-#define XSCALE2_COUNT3_EVT_MASK	(0xff << XSCALE2_COUNT3_EVT_SHFT)
-
-static inline u32
-xscale2pmu_read_pmnc(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
-	/* bits 1-2 and 4-23 are read-unpredictable */
-	return val & 0xff000009;
-}
-
-static inline void
-xscale2pmu_write_pmnc(u32 val)
-{
-	/* bits 4-23 are write-as-0, 24-31 are write ignored */
-	val &= 0xf;
-	asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_overflow_flags(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale2pmu_write_overflow_flags(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
-}
-
-static inline u32
-xscale2pmu_read_event_select(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
-	return val;
-}
-
-static inline void
-xscale2pmu_write_event_select(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
-}
-
-static inline u32
-xscale2pmu_read_int_enable(void)
-{
-	u32 val;
-	asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
-	return val;
-}
-
-static void
-xscale2pmu_write_int_enable(u32 val)
-{
-	asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
-}
-
-static inline int
-xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
-					enum xscale_counters counter)
-{
-	int ret = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
-		break;
-	case XSCALE_COUNTER0:
-		ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
-		break;
-	case XSCALE_COUNTER1:
-		ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
-		break;
-	case XSCALE_COUNTER2:
-		ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
-		break;
-	case XSCALE_COUNTER3:
-		ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
-	}
-
-	return ret;
-}
-
-static irqreturn_t
-xscale2pmu_handle_irq(int irq_num, void *dev)
-{
-	unsigned long pmnc, of_flags;
-	struct perf_sample_data data;
-	struct cpu_hw_events *cpuc;
-	struct pt_regs *regs;
-	int idx;
-
-	/* Disable the PMU. */
-	pmnc = xscale2pmu_read_pmnc();
-	xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
-
-	/* Check the overflow flag register. */
-	of_flags = xscale2pmu_read_overflow_flags();
-	if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
-		return IRQ_NONE;
-
-	/* Clear the overflow bits. */
-	xscale2pmu_write_overflow_flags(of_flags);
-
-	regs = get_irq_regs();
-
-	perf_sample_data_init(&data, 0);
-
-	cpuc = &__get_cpu_var(cpu_hw_events);
-	for (idx = 0; idx <= armpmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		if (!test_bit(idx, cpuc->active_mask))
-			continue;
-
-		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
-			continue;
-
-		hwc = &event->hw;
-		armpmu_event_update(event, hwc, idx);
-		data.period = event->hw.last_period;
-		if (!armpmu_event_set_period(event, hwc, idx))
-			continue;
-
-		if (perf_event_overflow(event, 0, &data, regs))
-			armpmu->disable(hwc, idx);
-	}
-
-	irq_work_run();
-
-	/*
-	 * Re-enable the PMU.
-	 */
-	pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(pmnc);
-
-	return IRQ_HANDLED;
-}
-
-static void
-xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags, ien, evtsel;
-
-	ien = xscale2pmu_read_int_enable();
-	evtsel = xscale2pmu_read_event_select();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		ien |= XSCALE2_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		ien |= XSCALE2_COUNT0_INT_EN;
-		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		ien |= XSCALE2_COUNT1_INT_EN;
-		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER2:
-		ien |= XSCALE2_COUNT2_INT_EN;
-		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER3:
-		ien |= XSCALE2_COUNT3_INT_EN;
-		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
-		evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	xscale2pmu_write_event_select(evtsel);
-	xscale2pmu_write_int_enable(ien);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
-{
-	unsigned long flags, ien, evtsel;
-
-	ien = xscale2pmu_read_int_enable();
-	evtsel = xscale2pmu_read_event_select();
-
-	switch (idx) {
-	case XSCALE_CYCLE_COUNTER:
-		ien &= ~XSCALE2_CCOUNT_INT_EN;
-		break;
-	case XSCALE_COUNTER0:
-		ien &= ~XSCALE2_COUNT0_INT_EN;
-		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER1:
-		ien &= ~XSCALE2_COUNT1_INT_EN;
-		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER2:
-		ien &= ~XSCALE2_COUNT2_INT_EN;
-		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
-		break;
-	case XSCALE_COUNTER3:
-		ien &= ~XSCALE2_COUNT3_INT_EN;
-		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
-		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
-		break;
-	default:
-		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
-		return;
-	}
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	xscale2pmu_write_event_select(evtsel);
-	xscale2pmu_write_int_enable(ien);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static int
-xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
-			struct hw_perf_event *event)
-{
-	int idx = xscale1pmu_get_event_idx(cpuc, event);
-	if (idx >= 0)
-		goto out;
-
-	if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
-		idx = XSCALE_COUNTER3;
-	else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
-		idx = XSCALE_COUNTER2;
-out:
-	return idx;
-}
-
-static void
-xscale2pmu_start(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
-	val |= XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static void
-xscale2pmu_stop(void)
-{
-	unsigned long flags, val;
-
-	spin_lock_irqsave(&pmu_lock, flags);
-	val = xscale2pmu_read_pmnc();
-	val &= ~XSCALE_PMU_ENABLE;
-	xscale2pmu_write_pmnc(val);
-	spin_unlock_irqrestore(&pmu_lock, flags);
-}
-
-static inline u32
-xscale2pmu_read_counter(int counter)
-{
-	u32 val = 0;
-
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER2:
-		asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
-		break;
-	case XSCALE_COUNTER3:
-		asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
-		break;
-	}
-
-	return val;
-}
-
-static inline void
-xscale2pmu_write_counter(int counter, u32 val)
-{
-	switch (counter) {
-	case XSCALE_CYCLE_COUNTER:
-		asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER0:
-		asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER1:
-		asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER2:
-		asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
-		break;
-	case XSCALE_COUNTER3:
-		asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
-		break;
-	}
-}
-
-static const struct arm_pmu xscale2pmu = {
-	.id		= ARM_PERF_PMU_ID_XSCALE2,
-	.handle_irq	= xscale2pmu_handle_irq,
-	.enable		= xscale2pmu_enable_event,
-	.disable	= xscale2pmu_disable_event,
-	.event_map	= xscalepmu_event_map,
-	.raw_event	= xscalepmu_raw_event,
-	.read_counter	= xscale2pmu_read_counter,
-	.write_counter	= xscale2pmu_write_counter,
-	.get_event_idx	= xscale2pmu_get_event_idx,
-	.start		= xscale2pmu_start,
-	.stop		= xscale2pmu_stop,
-	.num_events	= 5,
-	.max_period	= (1LLU << 32) - 1,
-};
+/* Include the PMU-specific implementations. */
+#include "perf_event_xscale.c"
+#include "perf_event_v6.c"
+#include "perf_event_v7.c"
 
 static int __init
 init_hw_perf_events(void)
@@ -2977,37 +622,16 @@ init_hw_perf_events(void)
 		case 0xB360:	/* ARM1136 */
 		case 0xB560:	/* ARM1156 */
 		case 0xB760:	/* ARM1176 */
-			armpmu = &armv6pmu;
-			memcpy(armpmu_perf_cache_map, armv6_perf_cache_map,
-					sizeof(armv6_perf_cache_map));
+			armpmu = armv6pmu_init();
 			break;
 		case 0xB020:	/* ARM11mpcore */
-			armpmu = &armv6mpcore_pmu;
-			memcpy(armpmu_perf_cache_map,
-			       armv6mpcore_perf_cache_map,
-			       sizeof(armv6mpcore_perf_cache_map));
+			armpmu = armv6mpcore_pmu_init();
 			break;
 		case 0xC080:	/* Cortex-A8 */
-			armv7pmu.id = ARM_PERF_PMU_ID_CA8;
-			memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map,
-				sizeof(armv7_a8_perf_cache_map));
-			armv7pmu.event_map = armv7_a8_pmu_event_map;
-			armpmu = &armv7pmu;
-
-			/* Reset PMNC and read the nb of CNTx counters
-			    supported */
-			armv7pmu.num_events = armv7_reset_read_pmnc();
+			armpmu = armv7_a8_pmu_init();
 			break;
 		case 0xC090:	/* Cortex-A9 */
-			armv7pmu.id = ARM_PERF_PMU_ID_CA9;
-			memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map,
-				sizeof(armv7_a9_perf_cache_map));
-			armv7pmu.event_map = armv7_a9_pmu_event_map;
-			armpmu = &armv7pmu;
-
-			/* Reset PMNC and read the nb of CNTx counters
-			    supported */
-			armv7pmu.num_events = armv7_reset_read_pmnc();
+			armpmu = armv7_a9_pmu_init();
 			break;
 		}
 	/* Intel CPUs [xscale]. */
@@ -3015,30 +639,26 @@ init_hw_perf_events(void)
 		part_number = (cpuid >> 13) & 0x7;
 		switch (part_number) {
 		case 1:
-			armpmu = &xscale1pmu;
-			memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
-					sizeof(xscale_perf_cache_map));
+			armpmu = xscale1pmu_init();
 			break;
 		case 2:
-			armpmu = &xscale2pmu;
-			memcpy(armpmu_perf_cache_map, xscale_perf_cache_map,
-					sizeof(xscale_perf_cache_map));
+			armpmu = xscale2pmu_init();
 			break;
 		}
 	}
 
 	if (armpmu) {
 		pr_info("enabled with %s PMU driver, %d counters available\n",
-				arm_pmu_names[armpmu->id], armpmu->num_events);
+			armpmu->name, armpmu->num_events);
 	} else {
 		pr_info("no hardware support available\n");
 	}
 
-	perf_pmu_register(&pmu);
+	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
 
 	return 0;
 }
-arch_initcall(init_hw_perf_events);
+early_initcall(init_hw_perf_events);
 
 /*
  * Callchain handling code.
@@ -3053,17 +673,17 @@ arch_initcall(init_hw_perf_events);
  * This code has been adapted from the ARM OProfile support.
  */
 struct frame_tail {
-	struct frame_tail   *fp;
-	unsigned long	    sp;
-	unsigned long	    lr;
+	struct frame_tail __user *fp;
+	unsigned long sp;
+	unsigned long lr;
 } __attribute__((packed));
 
 /*
  * Get the return address for a single stackframe and return a pointer to the
  * next frame tail.
  */
-static struct frame_tail *
-user_backtrace(struct frame_tail *tail,
+static struct frame_tail __user *
+user_backtrace(struct frame_tail __user *tail,
 	       struct perf_callchain_entry *entry)
 {
 	struct frame_tail buftail;
@@ -3089,10 +709,10 @@ user_backtrace(struct frame_tail *tail,
 void
 perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 {
-	struct frame_tail *tail;
+	struct frame_tail __user *tail;
 
 
-	tail = (struct frame_tail *)regs->ARM_fp - 1;
+	tail = (struct frame_tail __user *)regs->ARM_fp - 1;
 
 	while (tail && !((unsigned long)tail & 0x3))
 		tail = user_backtrace(tail, entry);
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
new file mode 100644
index 00000000000..c058bfc8532
--- /dev/null
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -0,0 +1,672 @@
+/*
+ * ARMv6 Performance counter handling code.
+ *
+ * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
+ *
+ * ARMv6 has 2 configurable performance counters and a single cycle counter.
+ * They all share a single reset bit but can be written to zero so we can use
+ * that for a reset.
+ *
+ * The counters can't be individually enabled or disabled so when we remove
+ * one event and replace it with another we could get spurious counts from the
+ * wrong event. However, we can take advantage of the fact that the
+ * performance counters can export events to the event bus, and the event bus
+ * itself can be monitored. This requires that we *don't* export the events to
+ * the event bus. The procedure for disabling a configurable counter is:
+ *	- change the counter to count the ETMEXTOUT[0] signal (0x20). This
+ *	  effectively stops the counter from counting.
+ *	- disable the counter's interrupt generation (each counter has it's
+ *	  own interrupt enable bit).
+ * Once stopped, the counter value can be written as 0 to reset.
+ *
+ * To enable a counter:
+ *	- enable the counter's interrupt generation.
+ *	- set the new event type.
+ *
+ * Note: the dedicated cycle counter only counts cycles and can't be
+ * enabled/disabled independently of the others. When we want to disable the
+ * cycle counter, we have to just disable the interrupt reporting and start
+ * ignoring that counter. When re-enabling, we have to reset the value and
+ * enable the interrupt.
+ */
+
+#ifdef CONFIG_CPU_V6
+enum armv6_perf_types {
+	ARMV6_PERFCTR_ICACHE_MISS	    = 0x0,
+	ARMV6_PERFCTR_IBUF_STALL	    = 0x1,
+	ARMV6_PERFCTR_DDEP_STALL	    = 0x2,
+	ARMV6_PERFCTR_ITLB_MISS		    = 0x3,
+	ARMV6_PERFCTR_DTLB_MISS		    = 0x4,
+	ARMV6_PERFCTR_BR_EXEC		    = 0x5,
+	ARMV6_PERFCTR_BR_MISPREDICT	    = 0x6,
+	ARMV6_PERFCTR_INSTR_EXEC	    = 0x7,
+	ARMV6_PERFCTR_DCACHE_HIT	    = 0x9,
+	ARMV6_PERFCTR_DCACHE_ACCESS	    = 0xA,
+	ARMV6_PERFCTR_DCACHE_MISS	    = 0xB,
+	ARMV6_PERFCTR_DCACHE_WBACK	    = 0xC,
+	ARMV6_PERFCTR_SW_PC_CHANGE	    = 0xD,
+	ARMV6_PERFCTR_MAIN_TLB_MISS	    = 0xF,
+	ARMV6_PERFCTR_EXPL_D_ACCESS	    = 0x10,
+	ARMV6_PERFCTR_LSU_FULL_STALL	    = 0x11,
+	ARMV6_PERFCTR_WBUF_DRAINED	    = 0x12,
+	ARMV6_PERFCTR_CPU_CYCLES	    = 0xFF,
+	ARMV6_PERFCTR_NOP		    = 0x20,
+};
+
+enum armv6_counters {
+	ARMV6_CYCLE_COUNTER = 1,
+	ARMV6_COUNTER0,
+	ARMV6_COUNTER1,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6_PERFCTR_INSTR_EXEC,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6_PERFCTR_BR_MISPREDICT,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					  [PERF_COUNT_HW_CACHE_OP_MAX]
+					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV6_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * The ARM performance counters can count micro DTLB misses,
+		 * micro ITLB misses and main TLB misses. There isn't an event
+		 * for TLB misses, so use the micro misses here and if users
+		 * want the main TLB misses they can use a raw counter.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV6_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+enum armv6mpcore_perf_types {
+	ARMV6MPCORE_PERFCTR_ICACHE_MISS	    = 0x0,
+	ARMV6MPCORE_PERFCTR_IBUF_STALL	    = 0x1,
+	ARMV6MPCORE_PERFCTR_DDEP_STALL	    = 0x2,
+	ARMV6MPCORE_PERFCTR_ITLB_MISS	    = 0x3,
+	ARMV6MPCORE_PERFCTR_DTLB_MISS	    = 0x4,
+	ARMV6MPCORE_PERFCTR_BR_EXEC	    = 0x5,
+	ARMV6MPCORE_PERFCTR_BR_NOTPREDICT   = 0x6,
+	ARMV6MPCORE_PERFCTR_BR_MISPREDICT   = 0x7,
+	ARMV6MPCORE_PERFCTR_INSTR_EXEC	    = 0x8,
+	ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA,
+	ARMV6MPCORE_PERFCTR_DCACHE_RDMISS   = 0xB,
+	ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC,
+	ARMV6MPCORE_PERFCTR_DCACHE_WRMISS   = 0xD,
+	ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE,
+	ARMV6MPCORE_PERFCTR_SW_PC_CHANGE    = 0xF,
+	ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS   = 0x10,
+	ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11,
+	ARMV6MPCORE_PERFCTR_LSU_FULL_STALL  = 0x12,
+	ARMV6MPCORE_PERFCTR_WBUF_DRAINED    = 0x13,
+	ARMV6MPCORE_PERFCTR_CPU_CYCLES	    = 0xFF,
+};
+
+/*
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV6MPCORE_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV6MPCORE_PERFCTR_INSTR_EXEC,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV6MPCORE_PERFCTR_BR_MISPREDICT,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					[PERF_COUNT_HW_CACHE_OP_MAX]
+					[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  =
+				ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS,
+			[C(RESULT_MISS)]    =
+				ARMV6MPCORE_PERFCTR_DCACHE_RDMISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  =
+				ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS,
+			[C(RESULT_MISS)]    =
+				ARMV6MPCORE_PERFCTR_DCACHE_WRMISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * The ARM performance counters can count micro DTLB misses,
+		 * micro ITLB misses and main TLB misses. There isn't an event
+		 * for TLB misses, so use the micro misses here and if users
+		 * want the main TLB misses they can use a raw counter.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = ARMV6MPCORE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]  = CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]    = CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+static inline unsigned long
+armv6_pmcr_read(void)
+{
+	u32 val;
+	asm volatile("mrc   p15, 0, %0, c15, c12, 0" : "=r"(val));
+	return val;
+}
+
+static inline void
+armv6_pmcr_write(unsigned long val)
+{
+	asm volatile("mcr   p15, 0, %0, c15, c12, 0" : : "r"(val));
+}
+
+#define ARMV6_PMCR_ENABLE		(1 << 0)
+#define ARMV6_PMCR_CTR01_RESET		(1 << 1)
+#define ARMV6_PMCR_CCOUNT_RESET		(1 << 2)
+#define ARMV6_PMCR_CCOUNT_DIV		(1 << 3)
+#define ARMV6_PMCR_COUNT0_IEN		(1 << 4)
+#define ARMV6_PMCR_COUNT1_IEN		(1 << 5)
+#define ARMV6_PMCR_CCOUNT_IEN		(1 << 6)
+#define ARMV6_PMCR_COUNT0_OVERFLOW	(1 << 8)
+#define ARMV6_PMCR_COUNT1_OVERFLOW	(1 << 9)
+#define ARMV6_PMCR_CCOUNT_OVERFLOW	(1 << 10)
+#define ARMV6_PMCR_EVT_COUNT0_SHIFT	20
+#define ARMV6_PMCR_EVT_COUNT0_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT)
+#define ARMV6_PMCR_EVT_COUNT1_SHIFT	12
+#define ARMV6_PMCR_EVT_COUNT1_MASK	(0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT)
+
+#define ARMV6_PMCR_OVERFLOWED_MASK \
+	(ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \
+	 ARMV6_PMCR_CCOUNT_OVERFLOW)
+
+static inline int
+armv6_pmcr_has_overflowed(unsigned long pmcr)
+{
+	return pmcr & ARMV6_PMCR_OVERFLOWED_MASK;
+}
+
+static inline int
+armv6_pmcr_counter_has_overflowed(unsigned long pmcr,
+				  enum armv6_counters counter)
+{
+	int ret = 0;
+
+	if (ARMV6_CYCLE_COUNTER == counter)
+		ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW;
+	else if (ARMV6_COUNTER0 == counter)
+		ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW;
+	else if (ARMV6_COUNTER1 == counter)
+		ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW;
+	else
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+	return ret;
+}
+
+static inline u32
+armv6pmu_read_counter(int counter)
+{
+	unsigned long value = 0;
+
+	if (ARMV6_CYCLE_COUNTER == counter)
+		asm volatile("mrc   p15, 0, %0, c15, c12, 1" : "=r"(value));
+	else if (ARMV6_COUNTER0 == counter)
+		asm volatile("mrc   p15, 0, %0, c15, c12, 2" : "=r"(value));
+	else if (ARMV6_COUNTER1 == counter)
+		asm volatile("mrc   p15, 0, %0, c15, c12, 3" : "=r"(value));
+	else
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+
+	return value;
+}
+
+static inline void
+armv6pmu_write_counter(int counter,
+		       u32 value)
+{
+	if (ARMV6_CYCLE_COUNTER == counter)
+		asm volatile("mcr   p15, 0, %0, c15, c12, 1" : : "r"(value));
+	else if (ARMV6_COUNTER0 == counter)
+		asm volatile("mcr   p15, 0, %0, c15, c12, 2" : : "r"(value));
+	else if (ARMV6_COUNTER1 == counter)
+		asm volatile("mcr   p15, 0, %0, c15, c12, 3" : : "r"(value));
+	else
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+}
+
+static void
+armv6pmu_enable_event(struct hw_perf_event *hwc,
+		      int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	if (ARMV6_CYCLE_COUNTER == idx) {
+		mask	= 0;
+		evt	= ARMV6_PMCR_CCOUNT_IEN;
+	} else if (ARMV6_COUNTER0 == idx) {
+		mask	= ARMV6_PMCR_EVT_COUNT0_MASK;
+		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) |
+			  ARMV6_PMCR_COUNT0_IEN;
+	} else if (ARMV6_COUNTER1 == idx) {
+		mask	= ARMV6_PMCR_EVT_COUNT1_MASK;
+		evt	= (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) |
+			  ARMV6_PMCR_COUNT1_IEN;
+	} else {
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	/*
+	 * Mask out the current event and set the counter to count the event
+	 * that we're interested in.
+	 */
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~mask;
+	val |= evt;
+	armv6_pmcr_write(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t
+armv6pmu_handle_irq(int irq_num,
+		    void *dev)
+{
+	unsigned long pmcr = armv6_pmcr_read();
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	if (!armv6_pmcr_has_overflowed(pmcr))
+		return IRQ_NONE;
+
+	regs = get_irq_regs();
+
+	/*
+	 * The interrupts are cleared by writing the overflow flags back to
+	 * the control register. All of the other bits don't have any effect
+	 * if they are rewritten, so write the whole value back.
+	 */
+	armv6_pmcr_write(pmcr);
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		/*
+		 * We have a single interrupt for all counters. Check that
+		 * each counter has overflowed before we process it.
+		 */
+		if (!armv6_pmcr_counter_has_overflowed(pmcr, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	/*
+	 * Handle the pending perf events.
+	 *
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
+	 * will not work.
+	 */
+	irq_work_run();
+
+	return IRQ_HANDLED;
+}
+
+static void
+armv6pmu_start(void)
+{
+	unsigned long flags, val;
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val |= ARMV6_PMCR_ENABLE;
+	armv6_pmcr_write(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6pmu_stop(void)
+{
+	unsigned long flags, val;
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~ARMV6_PMCR_ENABLE;
+	armv6_pmcr_write(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+		       struct hw_perf_event *event)
+{
+	/* Always place a cycle counter into the cycle counter. */
+	if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) {
+		if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask))
+			return -EAGAIN;
+
+		return ARMV6_CYCLE_COUNTER;
+	} else {
+		/*
+		 * For anything other than a cycle counter, try and use
+		 * counter0 and counter1.
+		 */
+		if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask))
+			return ARMV6_COUNTER1;
+
+		if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask))
+			return ARMV6_COUNTER0;
+
+		/* The counters are all in use. */
+		return -EAGAIN;
+	}
+}
+
+static void
+armv6pmu_disable_event(struct hw_perf_event *hwc,
+		       int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	if (ARMV6_CYCLE_COUNTER == idx) {
+		mask	= ARMV6_PMCR_CCOUNT_IEN;
+		evt	= 0;
+	} else if (ARMV6_COUNTER0 == idx) {
+		mask	= ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK;
+		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT;
+	} else if (ARMV6_COUNTER1 == idx) {
+		mask	= ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK;
+		evt	= ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT;
+	} else {
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	/*
+	 * Mask out the current event and set the counter to count the number
+	 * of ETM bus signal assertion cycles. The external reporting should
+	 * be disabled and so this should never increment.
+	 */
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~mask;
+	val |= evt;
+	armv6_pmcr_write(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc,
+			      int idx)
+{
+	unsigned long val, mask, flags, evt = 0;
+
+	if (ARMV6_CYCLE_COUNTER == idx) {
+		mask	= ARMV6_PMCR_CCOUNT_IEN;
+	} else if (ARMV6_COUNTER0 == idx) {
+		mask	= ARMV6_PMCR_COUNT0_IEN;
+	} else if (ARMV6_COUNTER1 == idx) {
+		mask	= ARMV6_PMCR_COUNT1_IEN;
+	} else {
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	/*
+	 * Unlike UP ARMv6, we don't have a way of stopping the counters. We
+	 * simply disable the interrupt reporting.
+	 */
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = armv6_pmcr_read();
+	val &= ~mask;
+	val |= evt;
+	armv6_pmcr_write(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static const struct arm_pmu armv6pmu = {
+	.id			= ARM_PERF_PMU_ID_V6,
+	.name			= "v6",
+	.handle_irq		= armv6pmu_handle_irq,
+	.enable			= armv6pmu_enable_event,
+	.disable		= armv6pmu_disable_event,
+	.read_counter		= armv6pmu_read_counter,
+	.write_counter		= armv6pmu_write_counter,
+	.get_event_idx		= armv6pmu_get_event_idx,
+	.start			= armv6pmu_start,
+	.stop			= armv6pmu_stop,
+	.cache_map		= &armv6_perf_cache_map,
+	.event_map		= &armv6_perf_map,
+	.raw_event_mask		= 0xFF,
+	.num_events		= 3,
+	.max_period		= (1LLU << 32) - 1,
+};
+
+static const struct arm_pmu *__init armv6pmu_init(void)
+{
+	return &armv6pmu;
+}
+
+/*
+ * ARMv6mpcore is almost identical to single core ARMv6 with the exception
+ * that some of the events have different enumerations and that there is no
+ * *hack* to stop the programmable counters. To stop the counters we simply
+ * disable the interrupt reporting and update the event. When unthrottling we
+ * reset the period and enable the interrupt reporting.
+ */
+static const struct arm_pmu armv6mpcore_pmu = {
+	.id			= ARM_PERF_PMU_ID_V6MP,
+	.name			= "v6mpcore",
+	.handle_irq		= armv6pmu_handle_irq,
+	.enable			= armv6pmu_enable_event,
+	.disable		= armv6mpcore_pmu_disable_event,
+	.read_counter		= armv6pmu_read_counter,
+	.write_counter		= armv6pmu_write_counter,
+	.get_event_idx		= armv6pmu_get_event_idx,
+	.start			= armv6pmu_start,
+	.stop			= armv6pmu_stop,
+	.cache_map		= &armv6mpcore_perf_cache_map,
+	.event_map		= &armv6mpcore_perf_map,
+	.raw_event_mask		= 0xFF,
+	.num_events		= 3,
+	.max_period		= (1LLU << 32) - 1,
+};
+
+static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+{
+	return &armv6mpcore_pmu;
+}
+#else
+static const struct arm_pmu *__init armv6pmu_init(void)
+{
+	return NULL;
+}
+
+static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+{
+	return NULL;
+}
+#endif	/* CONFIG_CPU_V6 */
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
new file mode 100644
index 00000000000..2e1402556fa
--- /dev/null
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -0,0 +1,906 @@
+/*
+ * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code.
+ *
+ * ARMv7 support: Jean Pihet <jpihet@mvista.com>
+ * 2010 (c) MontaVista Software, LLC.
+ *
+ * Copied from ARMv6 code, with the low level code inspired
+ *  by the ARMv7 Oprofile code.
+ *
+ * Cortex-A8 has up to 4 configurable performance counters and
+ *  a single cycle counter.
+ * Cortex-A9 has up to 31 configurable performance counters and
+ *  a single cycle counter.
+ *
+ * All counters can be enabled/disabled and IRQ masked separately. The cycle
+ *  counter and all 4 performance counters together can be reset separately.
+ */
+
+#ifdef CONFIG_CPU_V7
+/* Common ARMv7 event types */
+enum armv7_perf_types {
+	ARMV7_PERFCTR_PMNC_SW_INCR		= 0x00,
+	ARMV7_PERFCTR_IFETCH_MISS		= 0x01,
+	ARMV7_PERFCTR_ITLB_MISS			= 0x02,
+	ARMV7_PERFCTR_DCACHE_REFILL		= 0x03,
+	ARMV7_PERFCTR_DCACHE_ACCESS		= 0x04,
+	ARMV7_PERFCTR_DTLB_REFILL		= 0x05,
+	ARMV7_PERFCTR_DREAD			= 0x06,
+	ARMV7_PERFCTR_DWRITE			= 0x07,
+
+	ARMV7_PERFCTR_EXC_TAKEN			= 0x09,
+	ARMV7_PERFCTR_EXC_EXECUTED		= 0x0A,
+	ARMV7_PERFCTR_CID_WRITE			= 0x0B,
+	/* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS.
+	 * It counts:
+	 *  - all branch instructions,
+	 *  - instructions that explicitly write the PC,
+	 *  - exception generating instructions.
+	 */
+	ARMV7_PERFCTR_PC_WRITE			= 0x0C,
+	ARMV7_PERFCTR_PC_IMM_BRANCH		= 0x0D,
+	ARMV7_PERFCTR_UNALIGNED_ACCESS		= 0x0F,
+	ARMV7_PERFCTR_PC_BRANCH_MIS_PRED	= 0x10,
+	ARMV7_PERFCTR_CLOCK_CYCLES		= 0x11,
+
+	ARMV7_PERFCTR_PC_BRANCH_MIS_USED	= 0x12,
+
+	ARMV7_PERFCTR_CPU_CYCLES		= 0xFF
+};
+
+/* ARMv7 Cortex-A8 specific event types */
+enum armv7_a8_perf_types {
+	ARMV7_PERFCTR_INSTR_EXECUTED		= 0x08,
+
+	ARMV7_PERFCTR_PC_PROC_RETURN		= 0x0E,
+
+	ARMV7_PERFCTR_WRITE_BUFFER_FULL		= 0x40,
+	ARMV7_PERFCTR_L2_STORE_MERGED		= 0x41,
+	ARMV7_PERFCTR_L2_STORE_BUFF		= 0x42,
+	ARMV7_PERFCTR_L2_ACCESS			= 0x43,
+	ARMV7_PERFCTR_L2_CACH_MISS		= 0x44,
+	ARMV7_PERFCTR_AXI_READ_CYCLES		= 0x45,
+	ARMV7_PERFCTR_AXI_WRITE_CYCLES		= 0x46,
+	ARMV7_PERFCTR_MEMORY_REPLAY		= 0x47,
+	ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY	= 0x48,
+	ARMV7_PERFCTR_L1_DATA_MISS		= 0x49,
+	ARMV7_PERFCTR_L1_INST_MISS		= 0x4A,
+	ARMV7_PERFCTR_L1_DATA_COLORING		= 0x4B,
+	ARMV7_PERFCTR_L1_NEON_DATA		= 0x4C,
+	ARMV7_PERFCTR_L1_NEON_CACH_DATA		= 0x4D,
+	ARMV7_PERFCTR_L2_NEON			= 0x4E,
+	ARMV7_PERFCTR_L2_NEON_HIT		= 0x4F,
+	ARMV7_PERFCTR_L1_INST			= 0x50,
+	ARMV7_PERFCTR_PC_RETURN_MIS_PRED	= 0x51,
+	ARMV7_PERFCTR_PC_BRANCH_FAILED		= 0x52,
+	ARMV7_PERFCTR_PC_BRANCH_TAKEN		= 0x53,
+	ARMV7_PERFCTR_PC_BRANCH_EXECUTED	= 0x54,
+	ARMV7_PERFCTR_OP_EXECUTED		= 0x55,
+	ARMV7_PERFCTR_CYCLES_INST_STALL		= 0x56,
+	ARMV7_PERFCTR_CYCLES_INST		= 0x57,
+	ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL	= 0x58,
+	ARMV7_PERFCTR_CYCLES_NEON_INST_STALL	= 0x59,
+	ARMV7_PERFCTR_NEON_CYCLES		= 0x5A,
+
+	ARMV7_PERFCTR_PMU0_EVENTS		= 0x70,
+	ARMV7_PERFCTR_PMU1_EVENTS		= 0x71,
+	ARMV7_PERFCTR_PMU_EVENTS		= 0x72,
+};
+
+/* ARMv7 Cortex-A9 specific event types */
+enum armv7_a9_perf_types {
+	ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC	= 0x40,
+	ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC	= 0x41,
+	ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC	= 0x42,
+
+	ARMV7_PERFCTR_COHERENT_LINE_MISS	= 0x50,
+	ARMV7_PERFCTR_COHERENT_LINE_HIT		= 0x51,
+
+	ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES	= 0x60,
+	ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES	= 0x61,
+	ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES	= 0x62,
+	ARMV7_PERFCTR_STREX_EXECUTED_PASSED	= 0x63,
+	ARMV7_PERFCTR_STREX_EXECUTED_FAILED	= 0x64,
+	ARMV7_PERFCTR_DATA_EVICTION		= 0x65,
+	ARMV7_PERFCTR_ISSUE_STAGE_NO_INST	= 0x66,
+	ARMV7_PERFCTR_ISSUE_STAGE_EMPTY		= 0x67,
+	ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE	= 0x68,
+
+	ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS	= 0x6E,
+
+	ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST	= 0x70,
+	ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST	= 0x71,
+	ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST	= 0x72,
+	ARMV7_PERFCTR_FP_EXECUTED_INST		= 0x73,
+	ARMV7_PERFCTR_NEON_EXECUTED_INST	= 0x74,
+
+	ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES	= 0x80,
+	ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES	= 0x81,
+	ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES	= 0x82,
+	ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES	= 0x83,
+	ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES	= 0x84,
+	ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES	= 0x85,
+	ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES	= 0x86,
+
+	ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES	= 0x8A,
+	ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES	= 0x8B,
+
+	ARMV7_PERFCTR_ISB_INST			= 0x90,
+	ARMV7_PERFCTR_DSB_INST			= 0x91,
+	ARMV7_PERFCTR_DMB_INST			= 0x92,
+	ARMV7_PERFCTR_EXT_INTERRUPTS		= 0x93,
+
+	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED	= 0xA0,
+	ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED	= 0xA1,
+	ARMV7_PERFCTR_PLE_FIFO_FLUSH		= 0xA2,
+	ARMV7_PERFCTR_PLE_RQST_COMPLETED	= 0xA3,
+	ARMV7_PERFCTR_PLE_FIFO_OVERFLOW		= 0xA4,
+	ARMV7_PERFCTR_PLE_RQST_PROG		= 0xA5
+};
+
+/*
+ * Cortex-A8 HW events mapping
+ *
+ * The hardware events that we support. We do support cache operations but
+ * we have harvard caches and no way to combine instruction and data
+ * accesses/misses in hardware.
+ */
+static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = ARMV7_PERFCTR_INSTR_EXECUTED,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					  [PERF_COUNT_HW_CACHE_OP_MAX]
+					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L1_INST,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L1_INST_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_L2_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_L2_CACH_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * Only ITLB misses and DTLB refills are supported.
+		 * If users want the DTLB refills misses a raw counter
+		 * must be used.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+/*
+ * Cortex-A9 HW events mapping
+ */
+static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = ARMV7_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    =
+					ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = ARMV7_PERFCTR_COHERENT_LINE_HIT,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = ARMV7_PERFCTR_COHERENT_LINE_MISS,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = ARMV7_PERFCTR_CLOCK_CYCLES,
+};
+
+static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					  [PERF_COUNT_HW_CACHE_OP_MAX]
+					  [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		/*
+		 * The performance counters don't differentiate between read
+		 * and write accesses/misses so this isn't strictly correct,
+		 * but it's the best we can do. Writes and reads get
+		 * combined.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DCACHE_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_IFETCH_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		/*
+		 * Only ITLB misses and DTLB refills are supported.
+		 * If users want the DTLB refills misses a raw counter
+		 * must be used.
+		 */
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_DTLB_REFILL,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= ARMV7_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= ARMV7_PERFCTR_PC_WRITE,
+			[C(RESULT_MISS)]
+					= ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+/*
+ * Perf Events counters
+ */
+enum armv7_counters {
+	ARMV7_CYCLE_COUNTER		= 1,	/* Cycle counter */
+	ARMV7_COUNTER0			= 2,	/* First event counter */
+};
+
+/*
+ * The cycle counter is ARMV7_CYCLE_COUNTER.
+ * The first event counter is ARMV7_COUNTER0.
+ * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
+ */
+#define	ARMV7_COUNTER_LAST	(ARMV7_COUNTER0 + armpmu->num_events - 1)
+
+/*
+ * ARMv7 low level PMNC access
+ */
+
+/*
+ * Per-CPU PMNC: config reg
+ */
+#define ARMV7_PMNC_E		(1 << 0) /* Enable all counters */
+#define ARMV7_PMNC_P		(1 << 1) /* Reset all counters */
+#define ARMV7_PMNC_C		(1 << 2) /* Cycle counter reset */
+#define ARMV7_PMNC_D		(1 << 3) /* CCNT counts every 64th cpu cycle */
+#define ARMV7_PMNC_X		(1 << 4) /* Export to ETM */
+#define ARMV7_PMNC_DP		(1 << 5) /* Disable CCNT if non-invasive debug*/
+#define	ARMV7_PMNC_N_SHIFT	11	 /* Number of counters supported */
+#define	ARMV7_PMNC_N_MASK	0x1f
+#define	ARMV7_PMNC_MASK		0x3f	 /* Mask for writable bits */
+
+/*
+ * Available counters
+ */
+#define ARMV7_CNT0		0	/* First event counter */
+#define ARMV7_CCNT		31	/* Cycle counter */
+
+/* Perf Event to low level counters mapping */
+#define ARMV7_EVENT_CNT_TO_CNTx	(ARMV7_COUNTER0 - ARMV7_CNT0)
+
+/*
+ * CNTENS: counters enable reg
+ */
+#define ARMV7_CNTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENS_C		(1 << ARMV7_CCNT)
+
+/*
+ * CNTENC: counters disable reg
+ */
+#define ARMV7_CNTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_CNTENC_C		(1 << ARMV7_CCNT)
+
+/*
+ * INTENS: counters overflow interrupt enable reg
+ */
+#define ARMV7_INTENS_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENS_C		(1 << ARMV7_CCNT)
+
+/*
+ * INTENC: counters overflow interrupt disable reg
+ */
+#define ARMV7_INTENC_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_INTENC_C		(1 << ARMV7_CCNT)
+
+/*
+ * EVTSEL: Event selection reg
+ */
+#define	ARMV7_EVTSEL_MASK	0xff		/* Mask for writable bits */
+
+/*
+ * SELECT: Counter selection reg
+ */
+#define	ARMV7_SELECT_MASK	0x1f		/* Mask for writable bits */
+
+/*
+ * FLAG: counters overflow flag status reg
+ */
+#define ARMV7_FLAG_P(idx)	(1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
+#define ARMV7_FLAG_C		(1 << ARMV7_CCNT)
+#define	ARMV7_FLAG_MASK		0xffffffff	/* Mask for writable bits */
+#define	ARMV7_OVERFLOWED_MASK	ARMV7_FLAG_MASK
+
+static inline unsigned long armv7_pmnc_read(void)
+{
+	u32 val;
+	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
+	return val;
+}
+
+static inline void armv7_pmnc_write(unsigned long val)
+{
+	val &= ARMV7_PMNC_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
+}
+
+static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+{
+	return pmnc & ARMV7_OVERFLOWED_MASK;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
+					enum armv7_counters counter)
+{
+	int ret = 0;
+
+	if (counter == ARMV7_CYCLE_COUNTER)
+		ret = pmnc & ARMV7_FLAG_C;
+	else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
+		ret = pmnc & ARMV7_FLAG_P(counter);
+	else
+		pr_err("CPU%u checking wrong counter %d overflow status\n",
+			smp_processor_id(), counter);
+
+	return ret;
+}
+
+static inline int armv7_pmnc_select_counter(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
+		pr_err("CPU%u selecting wrong PMNC counter"
+			" %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7pmu_read_counter(int idx)
+{
+	unsigned long value = 0;
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+		if (armv7_pmnc_select_counter(idx) == idx)
+			asm volatile("mrc p15, 0, %0, c9, c13, 2"
+				     : "=r" (value));
+	} else
+		pr_err("CPU%u reading wrong counter %d\n",
+			smp_processor_id(), idx);
+
+	return value;
+}
+
+static inline void armv7pmu_write_counter(int idx, u32 value)
+{
+	if (idx == ARMV7_CYCLE_COUNTER)
+		asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+	else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
+		if (armv7_pmnc_select_counter(idx) == idx)
+			asm volatile("mcr p15, 0, %0, c9, c13, 2"
+				     : : "r" (value));
+	} else
+		pr_err("CPU%u writing wrong counter %d\n",
+			smp_processor_id(), idx);
+}
+
+static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+{
+	if (armv7_pmnc_select_counter(idx) == idx) {
+		val &= ARMV7_EVTSEL_MASK;
+		asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
+	}
+}
+
+static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u enabling wrong PMNC counter"
+			" %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_CNTENS_C;
+	else
+		val = ARMV7_CNTENS_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+{
+	u32 val;
+
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u disabling wrong PMNC counter"
+			" %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_CNTENC_C;
+	else
+		val = ARMV7_CNTENC_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u enabling wrong PMNC counter"
+			" interrupt enable %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_INTENS_C;
+	else
+		val = ARMV7_INTENS_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+{
+	u32 val;
+
+	if ((idx != ARMV7_CYCLE_COUNTER) &&
+	    ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
+		pr_err("CPU%u disabling wrong PMNC counter"
+			" interrupt enable %d\n", smp_processor_id(), idx);
+		return -1;
+	}
+
+	if (idx == ARMV7_CYCLE_COUNTER)
+		val = ARMV7_INTENC_C;
+	else
+		val = ARMV7_INTENC_P(idx);
+
+	asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
+
+	return idx;
+}
+
+static inline u32 armv7_pmnc_getreset_flags(void)
+{
+	u32 val;
+
+	/* Read */
+	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+
+	/* Write to clear flags */
+	val &= ARMV7_FLAG_MASK;
+	asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val));
+
+	return val;
+}
+
+#ifdef DEBUG
+static void armv7_pmnc_dump_regs(void)
+{
+	u32 val;
+	unsigned int cnt;
+
+	printk(KERN_INFO "PMNC registers dump:\n");
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
+	printk(KERN_INFO "PMNC  =0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
+	printk(KERN_INFO "CNTENS=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
+	printk(KERN_INFO "INTENS=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
+	printk(KERN_INFO "FLAGS =0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
+	printk(KERN_INFO "SELECT=0x%08x\n", val);
+
+	asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
+	printk(KERN_INFO "CCNT  =0x%08x\n", val);
+
+	for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+		armv7_pmnc_select_counter(cnt);
+		asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
+		printk(KERN_INFO "CNT[%d] count =0x%08x\n",
+			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+		asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
+		printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
+			cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+	}
+}
+#endif
+
+static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags;
+
+	/*
+	 * Enable counter and interrupt, and set the counter to count
+	 * the event that we're interested in.
+	 */
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+
+	/*
+	 * Disable counter
+	 */
+	armv7_pmnc_disable_counter(idx);
+
+	/*
+	 * Set event (if destined for PMNx counters)
+	 * We don't need to set the event if it's a cycle count
+	 */
+	if (idx != ARMV7_CYCLE_COUNTER)
+		armv7_pmnc_write_evtsel(idx, hwc->config_base);
+
+	/*
+	 * Enable interrupt for this counter
+	 */
+	armv7_pmnc_enable_intens(idx);
+
+	/*
+	 * Enable counter
+	 */
+	armv7_pmnc_enable_counter(idx);
+
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags;
+
+	/*
+	 * Disable counter and interrupt
+	 */
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+
+	/*
+	 * Disable counter
+	 */
+	armv7_pmnc_disable_counter(idx);
+
+	/*
+	 * Disable interrupt for this counter
+	 */
+	armv7_pmnc_disable_intens(idx);
+
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long pmnc;
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	/*
+	 * Get and reset the IRQ flags
+	 */
+	pmnc = armv7_pmnc_getreset_flags();
+
+	/*
+	 * Did an overflow occur?
+	 */
+	if (!armv7_pmnc_has_overflowed(pmnc))
+		return IRQ_NONE;
+
+	/*
+	 * Handle the counter(s) overflow(s)
+	 */
+	regs = get_irq_regs();
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		/*
+		 * We have a single interrupt for all counters. Check that
+		 * each counter has overflowed before we process it.
+		 */
+		if (!armv7_pmnc_counter_has_overflowed(pmnc, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	/*
+	 * Handle the pending perf events.
+	 *
+	 * Note: this call *must* be run with interrupts disabled. For
+	 * platforms that can have the PMU interrupts raised as an NMI, this
+	 * will not work.
+	 */
+	irq_work_run();
+
+	return IRQ_HANDLED;
+}
+
+static void armv7pmu_start(void)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	/* Enable all counters */
+	armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void armv7pmu_stop(void)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	/* Disable all counters */
+	armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+				  struct hw_perf_event *event)
+{
+	int idx;
+
+	/* Always place a cycle counter into the cycle counter. */
+	if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
+		if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+			return -EAGAIN;
+
+		return ARMV7_CYCLE_COUNTER;
+	} else {
+		/*
+		 * For anything other than a cycle counter, try and use
+		 * the events counters
+		 */
+		for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
+			if (!test_and_set_bit(idx, cpuc->used_mask))
+				return idx;
+		}
+
+		/* The counters are all in use. */
+		return -EAGAIN;
+	}
+}
+
+static struct arm_pmu armv7pmu = {
+	.handle_irq		= armv7pmu_handle_irq,
+	.enable			= armv7pmu_enable_event,
+	.disable		= armv7pmu_disable_event,
+	.read_counter		= armv7pmu_read_counter,
+	.write_counter		= armv7pmu_write_counter,
+	.get_event_idx		= armv7pmu_get_event_idx,
+	.start			= armv7pmu_start,
+	.stop			= armv7pmu_stop,
+	.raw_event_mask		= 0xFF,
+	.max_period		= (1LLU << 32) - 1,
+};
+
+static u32 __init armv7_reset_read_pmnc(void)
+{
+	u32 nb_cnt;
+
+	/* Initialize & Reset PMNC: C and P bits */
+	armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
+
+	/* Read the nb of CNTx counters supported from PMNC */
+	nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK;
+
+	/* Add the CPU cycles counter and return */
+	return nb_cnt + 1;
+}
+
+static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+{
+	armv7pmu.id		= ARM_PERF_PMU_ID_CA8;
+	armv7pmu.name		= "ARMv7 Cortex-A8";
+	armv7pmu.cache_map	= &armv7_a8_perf_cache_map;
+	armv7pmu.event_map	= &armv7_a8_perf_map;
+	armv7pmu.num_events	= armv7_reset_read_pmnc();
+	return &armv7pmu;
+}
+
+static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+{
+	armv7pmu.id		= ARM_PERF_PMU_ID_CA9;
+	armv7pmu.name		= "ARMv7 Cortex-A9";
+	armv7pmu.cache_map	= &armv7_a9_perf_cache_map;
+	armv7pmu.event_map	= &armv7_a9_perf_map;
+	armv7pmu.num_events	= armv7_reset_read_pmnc();
+	return &armv7pmu;
+}
+#else
+static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+{
+	return NULL;
+}
+
+static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+{
+	return NULL;
+}
+#endif	/* CONFIG_CPU_V7 */
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
new file mode 100644
index 00000000000..28cd3b025bc
--- /dev/null
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -0,0 +1,807 @@
+/*
+ * ARMv5 [xscale] Performance counter handling code.
+ *
+ * Copyright (C) 2010, ARM Ltd., Will Deacon <will.deacon@arm.com>
+ *
+ * Based on the previous xscale OProfile code.
+ *
+ * There are two variants of the xscale PMU that we support:
+ * 	- xscale1pmu: 2 event counters and a cycle counter
+ * 	- xscale2pmu: 4 event counters and a cycle counter
+ * The two variants share event definitions, but have different
+ * PMU structures.
+ */
+
+#ifdef CONFIG_CPU_XSCALE
+enum xscale_perf_types {
+	XSCALE_PERFCTR_ICACHE_MISS		= 0x00,
+	XSCALE_PERFCTR_ICACHE_NO_DELIVER	= 0x01,
+	XSCALE_PERFCTR_DATA_STALL		= 0x02,
+	XSCALE_PERFCTR_ITLB_MISS		= 0x03,
+	XSCALE_PERFCTR_DTLB_MISS		= 0x04,
+	XSCALE_PERFCTR_BRANCH			= 0x05,
+	XSCALE_PERFCTR_BRANCH_MISS		= 0x06,
+	XSCALE_PERFCTR_INSTRUCTION		= 0x07,
+	XSCALE_PERFCTR_DCACHE_FULL_STALL	= 0x08,
+	XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG	= 0x09,
+	XSCALE_PERFCTR_DCACHE_ACCESS		= 0x0A,
+	XSCALE_PERFCTR_DCACHE_MISS		= 0x0B,
+	XSCALE_PERFCTR_DCACHE_WRITE_BACK	= 0x0C,
+	XSCALE_PERFCTR_PC_CHANGED		= 0x0D,
+	XSCALE_PERFCTR_BCU_REQUEST		= 0x10,
+	XSCALE_PERFCTR_BCU_FULL			= 0x11,
+	XSCALE_PERFCTR_BCU_DRAIN		= 0x12,
+	XSCALE_PERFCTR_BCU_ECC_NO_ELOG		= 0x14,
+	XSCALE_PERFCTR_BCU_1_BIT_ERR		= 0x15,
+	XSCALE_PERFCTR_RMW			= 0x16,
+	/* XSCALE_PERFCTR_CCNT is not hardware defined */
+	XSCALE_PERFCTR_CCNT			= 0xFE,
+	XSCALE_PERFCTR_UNUSED			= 0xFF,
+};
+
+enum xscale_counters {
+	XSCALE_CYCLE_COUNTER	= 1,
+	XSCALE_COUNTER0,
+	XSCALE_COUNTER1,
+	XSCALE_COUNTER2,
+	XSCALE_COUNTER3,
+};
+
+static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = {
+	[PERF_COUNT_HW_CPU_CYCLES]	    = XSCALE_PERFCTR_CCNT,
+	[PERF_COUNT_HW_INSTRUCTIONS]	    = XSCALE_PERFCTR_INSTRUCTION,
+	[PERF_COUNT_HW_CACHE_REFERENCES]    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_CACHE_MISSES]	    = HW_OP_UNSUPPORTED,
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH,
+	[PERF_COUNT_HW_BRANCH_MISSES]	    = XSCALE_PERFCTR_BRANCH_MISS,
+	[PERF_COUNT_HW_BUS_CYCLES]	    = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+					   [PERF_COUNT_HW_CACHE_OP_MAX]
+					   [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+	[C(L1D)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= XSCALE_PERFCTR_DCACHE_ACCESS,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DCACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(L1I)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ICACHE_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(LL)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(DTLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_DTLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(ITLB)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= XSCALE_PERFCTR_ITLB_MISS,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+	[C(BPU)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
+};
+
+#define	XSCALE_PMU_ENABLE	0x001
+#define XSCALE_PMN_RESET	0x002
+#define	XSCALE_CCNT_RESET	0x004
+#define	XSCALE_PMU_RESET	(CCNT_RESET | PMN_RESET)
+#define XSCALE_PMU_CNT64	0x008
+
+#define XSCALE1_OVERFLOWED_MASK	0x700
+#define XSCALE1_CCOUNT_OVERFLOW	0x400
+#define XSCALE1_COUNT0_OVERFLOW	0x100
+#define XSCALE1_COUNT1_OVERFLOW	0x200
+#define XSCALE1_CCOUNT_INT_EN	0x040
+#define XSCALE1_COUNT0_INT_EN	0x010
+#define XSCALE1_COUNT1_INT_EN	0x020
+#define XSCALE1_COUNT0_EVT_SHFT	12
+#define XSCALE1_COUNT0_EVT_MASK	(0xff << XSCALE1_COUNT0_EVT_SHFT)
+#define XSCALE1_COUNT1_EVT_SHFT	20
+#define XSCALE1_COUNT1_EVT_MASK	(0xff << XSCALE1_COUNT1_EVT_SHFT)
+
+static inline u32
+xscale1pmu_read_pmnc(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val));
+	return val;
+}
+
+static inline void
+xscale1pmu_write_pmnc(u32 val)
+{
+	/* upper 4bits and 7, 11 are write-as-0 */
+	val &= 0xffff77f;
+	asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val));
+}
+
+static inline int
+xscale1_pmnc_counter_has_overflowed(unsigned long pmnc,
+					enum xscale_counters counter)
+{
+	int ret = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		ret = pmnc & XSCALE1_CCOUNT_OVERFLOW;
+		break;
+	case XSCALE_COUNTER0:
+		ret = pmnc & XSCALE1_COUNT0_OVERFLOW;
+		break;
+	case XSCALE_COUNTER1:
+		ret = pmnc & XSCALE1_COUNT1_OVERFLOW;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+	}
+
+	return ret;
+}
+
+static irqreturn_t
+xscale1pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long pmnc;
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	/*
+	 * NOTE: there's an A stepping erratum that states if an overflow
+	 *       bit already exists and another occurs, the previous
+	 *       Overflow bit gets cleared. There's no workaround.
+	 *	 Fixed in B stepping or later.
+	 */
+	pmnc = xscale1pmu_read_pmnc();
+
+	/*
+	 * Write the value back to clear the overflow flags. Overflow
+	 * flags remain in pmnc for use below. We also disable the PMU
+	 * while we process the interrupt.
+	 */
+	xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
+
+	if (!(pmnc & XSCALE1_OVERFLOWED_MASK))
+		return IRQ_NONE;
+
+	regs = get_irq_regs();
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	irq_work_run();
+
+	/*
+	 * Re-enable the PMU.
+	 */
+	pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE;
+	xscale1pmu_write_pmnc(pmnc);
+
+	return IRQ_HANDLED;
+}
+
+static void
+xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		mask = 0;
+		evt = XSCALE1_CCOUNT_INT_EN;
+		break;
+	case XSCALE_COUNTER0:
+		mask = XSCALE1_COUNT0_EVT_MASK;
+		evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) |
+			XSCALE1_COUNT0_INT_EN;
+		break;
+	case XSCALE_COUNTER1:
+		mask = XSCALE1_COUNT1_EVT_MASK;
+		evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) |
+			XSCALE1_COUNT1_INT_EN;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val &= ~mask;
+	val |= evt;
+	xscale1pmu_write_pmnc(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long val, mask, evt, flags;
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		mask = XSCALE1_CCOUNT_INT_EN;
+		evt = 0;
+		break;
+	case XSCALE_COUNTER0:
+		mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK;
+		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER1:
+		mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK;
+		evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val &= ~mask;
+	val |= evt;
+	xscale1pmu_write_pmnc(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
+			struct hw_perf_event *event)
+{
+	if (XSCALE_PERFCTR_CCNT == event->config_base) {
+		if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask))
+			return -EAGAIN;
+
+		return XSCALE_CYCLE_COUNTER;
+	} else {
+		if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask))
+			return XSCALE_COUNTER1;
+
+		if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask))
+			return XSCALE_COUNTER0;
+
+		return -EAGAIN;
+	}
+}
+
+static void
+xscale1pmu_start(void)
+{
+	unsigned long flags, val;
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val |= XSCALE_PMU_ENABLE;
+	xscale1pmu_write_pmnc(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale1pmu_stop(void)
+{
+	unsigned long flags, val;
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale1pmu_read_pmnc();
+	val &= ~XSCALE_PMU_ENABLE;
+	xscale1pmu_write_pmnc(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline u32
+xscale1pmu_read_counter(int counter)
+{
+	u32 val = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val));
+		break;
+	}
+
+	return val;
+}
+
+static inline void
+xscale1pmu_write_counter(int counter, u32 val)
+{
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val));
+		break;
+	}
+}
+
+static const struct arm_pmu xscale1pmu = {
+	.id		= ARM_PERF_PMU_ID_XSCALE1,
+	.name		= "xscale1",
+	.handle_irq	= xscale1pmu_handle_irq,
+	.enable		= xscale1pmu_enable_event,
+	.disable	= xscale1pmu_disable_event,
+	.read_counter	= xscale1pmu_read_counter,
+	.write_counter	= xscale1pmu_write_counter,
+	.get_event_idx	= xscale1pmu_get_event_idx,
+	.start		= xscale1pmu_start,
+	.stop		= xscale1pmu_stop,
+	.cache_map	= &xscale_perf_cache_map,
+	.event_map	= &xscale_perf_map,
+	.raw_event_mask	= 0xFF,
+	.num_events	= 3,
+	.max_period	= (1LLU << 32) - 1,
+};
+
+static const struct arm_pmu *__init xscale1pmu_init(void)
+{
+	return &xscale1pmu;
+}
+
+#define XSCALE2_OVERFLOWED_MASK	0x01f
+#define XSCALE2_CCOUNT_OVERFLOW	0x001
+#define XSCALE2_COUNT0_OVERFLOW	0x002
+#define XSCALE2_COUNT1_OVERFLOW	0x004
+#define XSCALE2_COUNT2_OVERFLOW	0x008
+#define XSCALE2_COUNT3_OVERFLOW	0x010
+#define XSCALE2_CCOUNT_INT_EN	0x001
+#define XSCALE2_COUNT0_INT_EN	0x002
+#define XSCALE2_COUNT1_INT_EN	0x004
+#define XSCALE2_COUNT2_INT_EN	0x008
+#define XSCALE2_COUNT3_INT_EN	0x010
+#define XSCALE2_COUNT0_EVT_SHFT	0
+#define XSCALE2_COUNT0_EVT_MASK	(0xff << XSCALE2_COUNT0_EVT_SHFT)
+#define XSCALE2_COUNT1_EVT_SHFT	8
+#define XSCALE2_COUNT1_EVT_MASK	(0xff << XSCALE2_COUNT1_EVT_SHFT)
+#define XSCALE2_COUNT2_EVT_SHFT	16
+#define XSCALE2_COUNT2_EVT_MASK	(0xff << XSCALE2_COUNT2_EVT_SHFT)
+#define XSCALE2_COUNT3_EVT_SHFT	24
+#define XSCALE2_COUNT3_EVT_MASK	(0xff << XSCALE2_COUNT3_EVT_SHFT)
+
+static inline u32
+xscale2pmu_read_pmnc(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val));
+	/* bits 1-2 and 4-23 are read-unpredictable */
+	return val & 0xff000009;
+}
+
+static inline void
+xscale2pmu_write_pmnc(u32 val)
+{
+	/* bits 4-23 are write-as-0, 24-31 are write ignored */
+	val &= 0xf;
+	asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val));
+}
+
+static inline u32
+xscale2pmu_read_overflow_flags(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val));
+	return val;
+}
+
+static inline void
+xscale2pmu_write_overflow_flags(u32 val)
+{
+	asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val));
+}
+
+static inline u32
+xscale2pmu_read_event_select(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val));
+	return val;
+}
+
+static inline void
+xscale2pmu_write_event_select(u32 val)
+{
+	asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val));
+}
+
+static inline u32
+xscale2pmu_read_int_enable(void)
+{
+	u32 val;
+	asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val));
+	return val;
+}
+
+static void
+xscale2pmu_write_int_enable(u32 val)
+{
+	asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val));
+}
+
+static inline int
+xscale2_pmnc_counter_has_overflowed(unsigned long of_flags,
+					enum xscale_counters counter)
+{
+	int ret = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		ret = of_flags & XSCALE2_CCOUNT_OVERFLOW;
+		break;
+	case XSCALE_COUNTER0:
+		ret = of_flags & XSCALE2_COUNT0_OVERFLOW;
+		break;
+	case XSCALE_COUNTER1:
+		ret = of_flags & XSCALE2_COUNT1_OVERFLOW;
+		break;
+	case XSCALE_COUNTER2:
+		ret = of_flags & XSCALE2_COUNT2_OVERFLOW;
+		break;
+	case XSCALE_COUNTER3:
+		ret = of_flags & XSCALE2_COUNT3_OVERFLOW;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", counter);
+	}
+
+	return ret;
+}
+
+static irqreturn_t
+xscale2pmu_handle_irq(int irq_num, void *dev)
+{
+	unsigned long pmnc, of_flags;
+	struct perf_sample_data data;
+	struct cpu_hw_events *cpuc;
+	struct pt_regs *regs;
+	int idx;
+
+	/* Disable the PMU. */
+	pmnc = xscale2pmu_read_pmnc();
+	xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE);
+
+	/* Check the overflow flag register. */
+	of_flags = xscale2pmu_read_overflow_flags();
+	if (!(of_flags & XSCALE2_OVERFLOWED_MASK))
+		return IRQ_NONE;
+
+	/* Clear the overflow bits. */
+	xscale2pmu_write_overflow_flags(of_flags);
+
+	regs = get_irq_regs();
+
+	perf_sample_data_init(&data, 0);
+
+	cpuc = &__get_cpu_var(cpu_hw_events);
+	for (idx = 0; idx <= armpmu->num_events; ++idx) {
+		struct perf_event *event = cpuc->events[idx];
+		struct hw_perf_event *hwc;
+
+		if (!test_bit(idx, cpuc->active_mask))
+			continue;
+
+		if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
+			continue;
+
+		hwc = &event->hw;
+		armpmu_event_update(event, hwc, idx);
+		data.period = event->hw.last_period;
+		if (!armpmu_event_set_period(event, hwc, idx))
+			continue;
+
+		if (perf_event_overflow(event, 0, &data, regs))
+			armpmu->disable(hwc, idx);
+	}
+
+	irq_work_run();
+
+	/*
+	 * Re-enable the PMU.
+	 */
+	pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE;
+	xscale2pmu_write_pmnc(pmnc);
+
+	return IRQ_HANDLED;
+}
+
+static void
+xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags, ien, evtsel;
+
+	ien = xscale2pmu_read_int_enable();
+	evtsel = xscale2pmu_read_event_select();
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		ien |= XSCALE2_CCOUNT_INT_EN;
+		break;
+	case XSCALE_COUNTER0:
+		ien |= XSCALE2_COUNT0_INT_EN;
+		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER1:
+		ien |= XSCALE2_COUNT1_INT_EN;
+		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER2:
+		ien |= XSCALE2_COUNT2_INT_EN;
+		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER3:
+		ien |= XSCALE2_COUNT3_INT_EN;
+		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
+		evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	xscale2pmu_write_event_select(evtsel);
+	xscale2pmu_write_int_enable(ien);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
+{
+	unsigned long flags, ien, evtsel;
+
+	ien = xscale2pmu_read_int_enable();
+	evtsel = xscale2pmu_read_event_select();
+
+	switch (idx) {
+	case XSCALE_CYCLE_COUNTER:
+		ien &= ~XSCALE2_CCOUNT_INT_EN;
+		break;
+	case XSCALE_COUNTER0:
+		ien &= ~XSCALE2_COUNT0_INT_EN;
+		evtsel &= ~XSCALE2_COUNT0_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER1:
+		ien &= ~XSCALE2_COUNT1_INT_EN;
+		evtsel &= ~XSCALE2_COUNT1_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER2:
+		ien &= ~XSCALE2_COUNT2_INT_EN;
+		evtsel &= ~XSCALE2_COUNT2_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT;
+		break;
+	case XSCALE_COUNTER3:
+		ien &= ~XSCALE2_COUNT3_INT_EN;
+		evtsel &= ~XSCALE2_COUNT3_EVT_MASK;
+		evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT;
+		break;
+	default:
+		WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	xscale2pmu_write_event_select(evtsel);
+	xscale2pmu_write_int_enable(ien);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static int
+xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
+			struct hw_perf_event *event)
+{
+	int idx = xscale1pmu_get_event_idx(cpuc, event);
+	if (idx >= 0)
+		goto out;
+
+	if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask))
+		idx = XSCALE_COUNTER3;
+	else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask))
+		idx = XSCALE_COUNTER2;
+out:
+	return idx;
+}
+
+static void
+xscale2pmu_start(void)
+{
+	unsigned long flags, val;
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
+	val |= XSCALE_PMU_ENABLE;
+	xscale2pmu_write_pmnc(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static void
+xscale2pmu_stop(void)
+{
+	unsigned long flags, val;
+
+	raw_spin_lock_irqsave(&pmu_lock, flags);
+	val = xscale2pmu_read_pmnc();
+	val &= ~XSCALE_PMU_ENABLE;
+	xscale2pmu_write_pmnc(val);
+	raw_spin_unlock_irqrestore(&pmu_lock, flags);
+}
+
+static inline u32
+xscale2pmu_read_counter(int counter)
+{
+	u32 val = 0;
+
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER2:
+		asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val));
+		break;
+	case XSCALE_COUNTER3:
+		asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val));
+		break;
+	}
+
+	return val;
+}
+
+static inline void
+xscale2pmu_write_counter(int counter, u32 val)
+{
+	switch (counter) {
+	case XSCALE_CYCLE_COUNTER:
+		asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER0:
+		asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER1:
+		asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER2:
+		asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val));
+		break;
+	case XSCALE_COUNTER3:
+		asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val));
+		break;
+	}
+}
+
+static const struct arm_pmu xscale2pmu = {
+	.id		= ARM_PERF_PMU_ID_XSCALE2,
+	.name		= "xscale2",
+	.handle_irq	= xscale2pmu_handle_irq,
+	.enable		= xscale2pmu_enable_event,
+	.disable	= xscale2pmu_disable_event,
+	.read_counter	= xscale2pmu_read_counter,
+	.write_counter	= xscale2pmu_write_counter,
+	.get_event_idx	= xscale2pmu_get_event_idx,
+	.start		= xscale2pmu_start,
+	.stop		= xscale2pmu_stop,
+	.cache_map	= &xscale_perf_cache_map,
+	.event_map	= &xscale_perf_map,
+	.raw_event_mask	= 0xFF,
+	.num_events	= 5,
+	.max_period	= (1LLU << 32) - 1,
+};
+
+static const struct arm_pmu *__init xscale2pmu_init(void)
+{
+	return &xscale2pmu;
+}
+#else
+static const struct arm_pmu *__init xscale1pmu_init(void)
+{
+	return NULL;
+}
+
+static const struct arm_pmu *__init xscale2pmu_init(void)
+{
+	return NULL;
+}
+#endif	/* CONFIG_CPU_XSCALE */
diff --git a/arch/arm/kernel/pj4-cp0.c b/arch/arm/kernel/pj4-cp0.c
new file mode 100644
index 00000000000..a4b1b0748fd
--- /dev/null
+++ b/arch/arm/kernel/pj4-cp0.c
@@ -0,0 +1,94 @@
+/*
+ * linux/arch/arm/kernel/pj4-cp0.c
+ *
+ * PJ4 iWMMXt coprocessor context switching and handling
+ *
+ * Copyright (c) 2010 Marvell International Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/thread_notify.h>
+
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+	struct thread_info *thread = t;
+
+	switch (cmd) {
+	case THREAD_NOTIFY_FLUSH:
+		/*
+		 * flush_thread() zeroes thread->fpstate, so no need
+		 * to do anything here.
+		 *
+		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
+		 * initialised state information on the first fault.
+		 */
+
+	case THREAD_NOTIFY_EXIT:
+		iwmmxt_task_release(thread);
+		break;
+
+	case THREAD_NOTIFY_SWITCH:
+		iwmmxt_task_switch(thread);
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+	.notifier_call	= iwmmxt_do,
+};
+
+
+static u32 __init pj4_cp_access_read(void)
+{
+	u32 value;
+
+	__asm__ __volatile__ (
+		"mrc	p15, 0, %0, c1, c0, 2\n\t"
+		: "=r" (value));
+	return value;
+}
+
+static void __init pj4_cp_access_write(u32 value)
+{
+	u32 temp;
+
+	__asm__ __volatile__ (
+		"mcr	p15, 0, %1, c1, c0, 2\n\t"
+		"mrc	p15, 0, %0, c1, c0, 2\n\t"
+		"mov	%0, %0\n\t"
+		"sub	pc, pc, #4\n\t"
+		: "=r" (temp) : "r" (value));
+}
+
+
+/*
+ * Disable CP0/CP1 on boot, and let call_fpe() and the iWMMXt lazy
+ * switch code handle iWMMXt context switching.
+ */
+static int __init pj4_cp0_init(void)
+{
+	u32 cp_access;
+
+	cp_access = pj4_cp_access_read() & ~0xf;
+	pj4_cp_access_write(cp_access);
+
+	printk(KERN_INFO "PJ4 iWMMXt coprocessor enabled.\n");
+	elf_hwcap |= HWCAP_IWMMXT;
+	thread_register_notifier(&iwmmxt_notifier_block);
+
+	return 0;
+}
+
+late_initcall(pj4_cp0_init);
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 3e97483abcf..19c6816db61 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -1060,8 +1060,8 @@ static int ptrace_sethbpregs(struct task_struct *tsk, long num,
 			goto out;
 
 		if ((gen_type & implied_type) != gen_type) {
-				ret = -EINVAL;
-				goto out;
+			ret = -EINVAL;
+			goto out;
 		}
 
 		attr.bp_len	= gen_len;
diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S
index fd26f8d6515..9cf4cbf8f95 100644
--- a/arch/arm/kernel/relocate_kernel.S
+++ b/arch/arm/kernel/relocate_kernel.S
@@ -59,6 +59,8 @@ relocate_new_kernel:
 	ldr r2,kexec_boot_atags
 	mov pc,lr
 
+	.align
+
 	.globl kexec_start_address
 kexec_start_address:
 	.long	0x0
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
new file mode 100644
index 00000000000..2cdcc9287c7
--- /dev/null
+++ b/arch/arm/kernel/sched_clock.c
@@ -0,0 +1,69 @@
+/*
+ * sched_clock.c: support for extending counters to full 64-bit ns counter
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+
+#include <asm/sched_clock.h>
+
+static void sched_clock_poll(unsigned long wrap_ticks);
+static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0);
+static void (*sched_clock_update_fn)(void);
+
+static void sched_clock_poll(unsigned long wrap_ticks)
+{
+	mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks));
+	sched_clock_update_fn();
+}
+
+void __init init_sched_clock(struct clock_data *cd, void (*update)(void),
+	unsigned int clock_bits, unsigned long rate)
+{
+	unsigned long r, w;
+	u64 res, wrap;
+	char r_unit;
+
+	sched_clock_update_fn = update;
+
+	/* calculate the mult/shift to convert counter ticks to ns. */
+	clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 60);
+
+	r = rate;
+	if (r >= 4000000) {
+		r /= 1000000;
+		r_unit = 'M';
+	} else {
+		r /= 1000;
+		r_unit = 'k';
+	}
+
+	/* calculate how many ns until we wrap */
+	wrap = cyc_to_ns((1ULL << clock_bits) - 1, cd->mult, cd->shift);
+	do_div(wrap, NSEC_PER_MSEC);
+	w = wrap;
+
+	/* calculate the ns resolution of this counter */
+	res = cyc_to_ns(1ULL, cd->mult, cd->shift);
+	pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n",
+		clock_bits, r, r_unit, res, w);
+
+	/*
+	 * Start the timer to keep sched_clock() properly updated and
+	 * sets the initial epoch.
+	 */
+	sched_clock_timer.data = msecs_to_jiffies(w - (w / 10));
+	sched_clock_poll(sched_clock_timer.data);
+
+	/*
+	 * Ensure that sched_clock() starts off at 0ns
+	 */
+	cd->epoch_ns = 0;
+}
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 336f14e0e5c..3455ad33de4 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -75,9 +75,9 @@ extern void reboot_setup(char *str);
 
 unsigned int processor_id;
 EXPORT_SYMBOL(processor_id);
-unsigned int __machine_arch_type;
+unsigned int __machine_arch_type __read_mostly;
 EXPORT_SYMBOL(__machine_arch_type);
-unsigned int cacheid;
+unsigned int cacheid __read_mostly;
 EXPORT_SYMBOL(cacheid);
 
 unsigned int __atags_pointer __initdata;
@@ -91,24 +91,24 @@ EXPORT_SYMBOL(system_serial_low);
 unsigned int system_serial_high;
 EXPORT_SYMBOL(system_serial_high);
 
-unsigned int elf_hwcap;
+unsigned int elf_hwcap __read_mostly;
 EXPORT_SYMBOL(elf_hwcap);
 
 
 #ifdef MULTI_CPU
-struct processor processor;
+struct processor processor __read_mostly;
 #endif
 #ifdef MULTI_TLB
-struct cpu_tlb_fns cpu_tlb;
+struct cpu_tlb_fns cpu_tlb __read_mostly;
 #endif
 #ifdef MULTI_USER
-struct cpu_user_fns cpu_user;
+struct cpu_user_fns cpu_user __read_mostly;
 #endif
 #ifdef MULTI_CACHE
-struct cpu_cache_fns cpu_cache;
+struct cpu_cache_fns cpu_cache __read_mostly;
 #endif
 #ifdef CONFIG_OUTER_CACHE
-struct outer_cache_fns outer_cache;
+struct outer_cache_fns outer_cache __read_mostly;
 EXPORT_SYMBOL(outer_cache);
 #endif
 
@@ -126,6 +126,7 @@ EXPORT_SYMBOL(elf_platform);
 static const char *cpu_name;
 static const char *machine_name;
 static char __initdata cmd_line[COMMAND_LINE_SIZE];
+struct machine_desc *machine_desc __initdata;
 
 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
 static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } };
@@ -708,13 +709,11 @@ static struct init_tags {
 	{ 0, ATAG_NONE }
 };
 
-static void (*init_machine)(void) __initdata;
-
 static int __init customize_machine(void)
 {
 	/* customizes platform devices, or adds new ones */
-	if (init_machine)
-		init_machine();
+	if (machine_desc->init_machine)
+		machine_desc->init_machine();
 	return 0;
 }
 arch_initcall(customize_machine);
@@ -809,6 +808,7 @@ void __init setup_arch(char **cmdline_p)
 
 	setup_processor();
 	mdesc = setup_machine(machine_arch_type);
+	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
 	if (mdesc->soft_reboot)
@@ -868,13 +868,9 @@ void __init setup_arch(char **cmdline_p)
 	cpu_init();
 	tcm_init();
 
-	/*
-	 * Set up various architecture-specific pointers
-	 */
-	arch_nr_irqs = mdesc->nr_irqs;
-	init_arch_irq = mdesc->init_irq;
-	system_timer = mdesc->timer;
-	init_machine = mdesc->init_machine;
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+	handle_arch_irq = mdesc->handle_irq;
+#endif
 
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
@@ -884,6 +880,9 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #endif
 	early_trap_init();
+
+	if (mdesc->init_early)
+		mdesc->init_early();
 }
 
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 8c195959025..4539ebcb089 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -16,6 +16,7 @@
 #include <linux/cache.h>
 #include <linux/profile.h>
 #include <linux/errno.h>
+#include <linux/ftrace.h>
 #include <linux/mm.h>
 #include <linux/err.h>
 #include <linux/cpu.h>
@@ -24,6 +25,7 @@
 #include <linux/irq.h>
 #include <linux/percpu.h>
 #include <linux/clockchips.h>
+#include <linux/completion.h>
 
 #include <asm/atomic.h>
 #include <asm/cacheflush.h>
@@ -37,7 +39,6 @@
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
-#include <asm/smp_plat.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -46,64 +47,14 @@
  */
 struct secondary_data secondary_data;
 
-/*
- * structures for inter-processor calls
- * - A collection of single bit ipi messages.
- */
-struct ipi_data {
-	spinlock_t lock;
-	unsigned long ipi_count;
-	unsigned long bits;
-};
-
-static DEFINE_PER_CPU(struct ipi_data, ipi_data) = {
-	.lock	= SPIN_LOCK_UNLOCKED,
-};
-
 enum ipi_msg_type {
-	IPI_TIMER,
+	IPI_TIMER = 2,
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
 	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_STOP,
 };
 
-static inline void identity_mapping_add(pgd_t *pgd, unsigned long start,
-	unsigned long end)
-{
-	unsigned long addr, prot;
-	pmd_t *pmd;
-
-	prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE;
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
-		prot |= PMD_BIT4;
-
-	for (addr = start & PGDIR_MASK; addr < end;) {
-		pmd = pmd_offset(pgd + pgd_index(addr), addr);
-		pmd[0] = __pmd(addr | prot);
-		addr += SECTION_SIZE;
-		pmd[1] = __pmd(addr | prot);
-		addr += SECTION_SIZE;
-		flush_pmd_entry(pmd);
-		outer_clean_range(__pa(pmd), __pa(pmd + 1));
-	}
-}
-
-static inline void identity_mapping_del(pgd_t *pgd, unsigned long start,
-	unsigned long end)
-{
-	unsigned long addr;
-	pmd_t *pmd;
-
-	for (addr = start & PGDIR_MASK; addr < end; addr += PGDIR_SIZE) {
-		pmd = pmd_offset(pgd + pgd_index(addr), addr);
-		pmd[0] = __pmd(0);
-		pmd[1] = __pmd(0);
-		clean_pmd_entry(pmd);
-		outer_clean_range(__pa(pmd), __pa(pmd + 1));
-	}
-}
-
 int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
@@ -177,8 +128,12 @@ int __cpuinit __cpu_up(unsigned int cpu)
 			barrier();
 		}
 
-		if (!cpu_online(cpu))
+		if (!cpu_online(cpu)) {
+			pr_crit("CPU%u: failed to come online\n", cpu);
 			ret = -EIO;
+		}
+	} else {
+		pr_err("CPU%u: failed to boot: %d\n", cpu, ret);
 	}
 
 	secondary_data.stack = NULL;
@@ -194,18 +149,12 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 	pgd_free(&init_mm, pgd);
 
-	if (ret) {
-		printk(KERN_CRIT "CPU%u: processor failed to boot\n", cpu);
-
-		/*
-		 * FIXME: We need to clean up the new idle thread. --rmk
-		 */
-	}
-
 	return ret;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+static void percpu_timer_stop(void);
+
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
@@ -233,7 +182,7 @@ int __cpu_disable(void)
 	/*
 	 * Stop the local timer for this CPU.
 	 */
-	local_timer_stop();
+	percpu_timer_stop();
 
 	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU
@@ -252,12 +201,20 @@ int __cpu_disable(void)
 	return 0;
 }
 
+static DECLARE_COMPLETION(cpu_died);
+
 /*
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
 void __cpu_die(unsigned int cpu)
 {
+	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
+		pr_err("CPU%u: cpu didn't die\n", cpu);
+		return;
+	}
+	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
+
 	if (!platform_cpu_kill(cpu))
 		printk("CPU%u: unable to kill\n", cpu);
 }
@@ -274,12 +231,17 @@ void __ref cpu_die(void)
 {
 	unsigned int cpu = smp_processor_id();
 
-	local_irq_disable();
 	idle_task_exit();
 
+	local_irq_disable();
+	mb();
+
+	/* Tell __cpu_die() that this CPU is now safe to dispose of */
+	complete(&cpu_died);
+
 	/*
 	 * actual CPU shutdown procedure is at least platform (if not
-	 * CPU) specific
+	 * CPU) specific.
 	 */
 	platform_cpu_die(cpu);
 
@@ -289,6 +251,7 @@ void __ref cpu_die(void)
 	 * to be repeated to undo the effects of taking the CPU offline.
 	 */
 	__asm__("mov	sp, %0\n"
+	"	mov	fp, #0\n"
 	"	b	secondary_start_kernel"
 		:
 		: "r" (task_stack_page(current) + THREAD_SIZE - 8));
@@ -296,6 +259,17 @@ void __ref cpu_die(void)
 #endif /* CONFIG_HOTPLUG_CPU */
 
 /*
+ * Called by both boot and secondaries to move global data into
+ * per-processor storage.
+ */
+static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
+{
+	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
+
+	cpu_info->loops_per_jiffy = loops_per_jiffy;
+}
+
+/*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
  */
@@ -310,7 +284,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	 * All kernel threads share the same mm context; grab a
 	 * reference and switch to it.
 	 */
-	atomic_inc(&mm->mm_users);
 	atomic_inc(&mm->mm_count);
 	current->active_mm = mm;
 	cpumask_set_cpu(cpu, mm_cpumask(mm));
@@ -320,6 +293,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 
 	cpu_init();
 	preempt_disable();
+	trace_hardirqs_off();
 
 	/*
 	 * Give the platform a chance to do its own initialisation.
@@ -353,17 +327,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	cpu_idle();
 }
 
-/*
- * Called by both boot and secondaries to move global data into
- * per-processor storage.
- */
-void __cpuinit smp_store_cpu_info(unsigned int cpuid)
-{
-	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
-
-	cpu_info->loops_per_jiffy = loops_per_jiffy;
-}
-
 void __init smp_cpus_done(unsigned int max_cpus)
 {
 	int cpu;
@@ -386,61 +349,80 @@ void __init smp_prepare_boot_cpu(void)
 	per_cpu(cpu_data, cpu).idle = current;
 }
 
-static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
+void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned long flags;
-	unsigned int cpu;
+	unsigned int ncores = num_possible_cpus();
 
-	local_irq_save(flags);
-
-	for_each_cpu(cpu, mask) {
-		struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
-
-		spin_lock(&ipi->lock);
-		ipi->bits |= 1 << msg;
-		spin_unlock(&ipi->lock);
-	}
+	smp_store_cpu_info(smp_processor_id());
 
 	/*
-	 * Call the platform specific cross-CPU call function.
+	 * are we trying to boot more cores than exist?
 	 */
-	smp_cross_call(mask);
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
 
-	local_irq_restore(flags);
+		/*
+		 * Initialise the SCU if there are more than one CPU
+		 * and let them know where to start.
+		 */
+		platform_smp_prepare_cpus(max_cpus);
+	}
 }
 
 void arch_send_call_function_ipi_mask(const struct cpumask *mask)
 {
-	send_ipi_message(mask, IPI_CALL_FUNC);
+	smp_cross_call(mask, IPI_CALL_FUNC);
 }
 
 void arch_send_call_function_single_ipi(int cpu)
 {
-	send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
+	smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
 }
 
-void show_ipi_list(struct seq_file *p)
+static const char *ipi_types[NR_IPI] = {
+#define S(x,s)	[x - IPI_TIMER] = s
+	S(IPI_TIMER, "Timer broadcast interrupts"),
+	S(IPI_RESCHEDULE, "Rescheduling interrupts"),
+	S(IPI_CALL_FUNC, "Function call interrupts"),
+	S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"),
+	S(IPI_CPU_STOP, "CPU stop interrupts"),
+};
+
+void show_ipi_list(struct seq_file *p, int prec)
 {
-	unsigned int cpu;
+	unsigned int cpu, i;
 
-	seq_puts(p, "IPI:");
+	for (i = 0; i < NR_IPI; i++) {
+		seq_printf(p, "%*s%u: ", prec - 1, "IPI", i);
 
-	for_each_present_cpu(cpu)
-		seq_printf(p, " %10lu", per_cpu(ipi_data, cpu).ipi_count);
+		for_each_present_cpu(cpu)
+			seq_printf(p, "%10u ",
+				   __get_irq_stat(cpu, ipi_irqs[i]));
 
-	seq_putc(p, '\n');
+		seq_printf(p, " %s\n", ipi_types[i]);
+	}
 }
 
-void show_local_irqs(struct seq_file *p)
+u64 smp_irq_stat_cpu(unsigned int cpu)
 {
-	unsigned int cpu;
+	u64 sum = 0;
+	int i;
 
-	seq_printf(p, "LOC: ");
+	for (i = 0; i < NR_IPI; i++)
+		sum += __get_irq_stat(cpu, ipi_irqs[i]);
 
-	for_each_present_cpu(cpu)
-		seq_printf(p, "%10u ", irq_stat[cpu].local_timer_irqs);
+#ifdef CONFIG_LOCAL_TIMERS
+	sum += __get_irq_stat(cpu, local_timer_irqs);
+#endif
 
-	seq_putc(p, '\n');
+	return sum;
 }
 
 /*
@@ -457,24 +439,36 @@ static void ipi_timer(void)
 }
 
 #ifdef CONFIG_LOCAL_TIMERS
-asmlinkage void __exception do_local_timer(struct pt_regs *regs)
+asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
 	int cpu = smp_processor_id();
 
 	if (local_timer_ack()) {
-		irq_stat[cpu].local_timer_irqs++;
+		__inc_irq_stat(cpu, local_timer_irqs);
 		ipi_timer();
 	}
 
 	set_irq_regs(old_regs);
 }
+
+void show_local_irqs(struct seq_file *p, int prec)
+{
+	unsigned int cpu;
+
+	seq_printf(p, "%*s: ", prec, "LOC");
+
+	for_each_present_cpu(cpu)
+		seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs));
+
+	seq_printf(p, " Local timer interrupts\n");
+}
 #endif
 
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 static void smp_timer_broadcast(const struct cpumask *mask)
 {
-	send_ipi_message(mask, IPI_TIMER);
+	smp_cross_call(mask, IPI_TIMER);
 }
 #else
 #define smp_timer_broadcast	NULL
@@ -511,6 +505,21 @@ void __cpuinit percpu_timer_setup(void)
 	local_timer_setup(evt);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * The generic clock events code purposely does not stop the local timer
+ * on CPU_DEAD/CPU_DEAD_FROZEN hotplug events, so we have to do it
+ * manually here.
+ */
+static void percpu_timer_stop(void)
+{
+	unsigned int cpu = smp_processor_id();
+	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
+
+	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+}
+#endif
+
 static DEFINE_SPINLOCK(stop_lock);
 
 /*
@@ -537,216 +546,76 @@ static void ipi_cpu_stop(unsigned int cpu)
 
 /*
  * Main handler for inter-processor interrupts
- *
- * For ARM, the ipimask now only identifies a single
- * category of IPI (Bit 1 IPIs have been replaced by a
- * different mechanism):
- *
- *  Bit 0 - Inter-processor function call
  */
-asmlinkage void __exception do_IPI(struct pt_regs *regs)
+asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
 {
 	unsigned int cpu = smp_processor_id();
-	struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
 	struct pt_regs *old_regs = set_irq_regs(regs);
 
-	ipi->ipi_count++;
-
-	for (;;) {
-		unsigned long msgs;
-
-		spin_lock(&ipi->lock);
-		msgs = ipi->bits;
-		ipi->bits = 0;
-		spin_unlock(&ipi->lock);
+	if (ipinr >= IPI_TIMER && ipinr < IPI_TIMER + NR_IPI)
+		__inc_irq_stat(cpu, ipi_irqs[ipinr - IPI_TIMER]);
 
-		if (!msgs)
-			break;
-
-		do {
-			unsigned nextmsg;
-
-			nextmsg = msgs & -msgs;
-			msgs &= ~nextmsg;
-			nextmsg = ffz(~nextmsg);
-
-			switch (nextmsg) {
-			case IPI_TIMER:
-				ipi_timer();
-				break;
+	switch (ipinr) {
+	case IPI_TIMER:
+		ipi_timer();
+		break;
 
-			case IPI_RESCHEDULE:
-				/*
-				 * nothing more to do - eveything is
-				 * done on the interrupt return path
-				 */
-				break;
+	case IPI_RESCHEDULE:
+		/*
+		 * nothing more to do - eveything is
+		 * done on the interrupt return path
+		 */
+		break;
 
-			case IPI_CALL_FUNC:
-				generic_smp_call_function_interrupt();
-				break;
+	case IPI_CALL_FUNC:
+		generic_smp_call_function_interrupt();
+		break;
 
-			case IPI_CALL_FUNC_SINGLE:
-				generic_smp_call_function_single_interrupt();
-				break;
+	case IPI_CALL_FUNC_SINGLE:
+		generic_smp_call_function_single_interrupt();
+		break;
 
-			case IPI_CPU_STOP:
-				ipi_cpu_stop(cpu);
-				break;
+	case IPI_CPU_STOP:
+		ipi_cpu_stop(cpu);
+		break;
 
-			default:
-				printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%x\n",
-				       cpu, nextmsg);
-				break;
-			}
-		} while (msgs);
+	default:
+		printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%x\n",
+		       cpu, ipinr);
+		break;
 	}
-
 	set_irq_regs(old_regs);
 }
 
 void smp_send_reschedule(int cpu)
 {
-	send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
+	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
 void smp_send_stop(void)
 {
-	cpumask_t mask = cpu_online_map;
-	cpu_clear(smp_processor_id(), mask);
-	if (!cpus_empty(mask))
-		send_ipi_message(&mask, IPI_CPU_STOP);
-}
+	unsigned long timeout;
 
-/*
- * not supported here
- */
-int setup_profiling_timer(unsigned int multiplier)
-{
-	return -EINVAL;
-}
+	if (num_online_cpus() > 1) {
+		cpumask_t mask = cpu_online_map;
+		cpu_clear(smp_processor_id(), mask);
 
-static void
-on_each_cpu_mask(void (*func)(void *), void *info, int wait,
-		const struct cpumask *mask)
-{
-	preempt_disable();
+		smp_cross_call(&mask, IPI_CPU_STOP);
+	}
 
-	smp_call_function_many(mask, func, info, wait);
-	if (cpumask_test_cpu(smp_processor_id(), mask))
-		func(info);
+	/* Wait up to one second for other CPUs to stop */
+	timeout = USEC_PER_SEC;
+	while (num_online_cpus() > 1 && timeout--)
+		udelay(1);
 
-	preempt_enable();
+	if (num_online_cpus() > 1)
+		pr_warning("SMP: failed to stop secondary CPUs\n");
 }
 
-/**********************************************************************/
-
 /*
- * TLB operations
+ * not supported here
  */
-struct tlb_args {
-	struct vm_area_struct *ta_vma;
-	unsigned long ta_start;
-	unsigned long ta_end;
-};
-
-static inline void ipi_flush_tlb_all(void *ignored)
-{
-	local_flush_tlb_all();
-}
-
-static inline void ipi_flush_tlb_mm(void *arg)
-{
-	struct mm_struct *mm = (struct mm_struct *)arg;
-
-	local_flush_tlb_mm(mm);
-}
-
-static inline void ipi_flush_tlb_page(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
-}
-
-static inline void ipi_flush_tlb_kernel_page(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_kernel_page(ta->ta_start);
-}
-
-static inline void ipi_flush_tlb_range(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
-}
-
-static inline void ipi_flush_tlb_kernel_range(void *arg)
-{
-	struct tlb_args *ta = (struct tlb_args *)arg;
-
-	local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
-}
-
-void flush_tlb_all(void)
-{
-	if (tlb_ops_need_broadcast())
-		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
-	else
-		local_flush_tlb_all();
-}
-
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	if (tlb_ops_need_broadcast())
-		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm));
-	else
-		local_flush_tlb_mm(mm);
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_vma = vma;
-		ta.ta_start = uaddr;
-		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm));
-	} else
-		local_flush_tlb_page(vma, uaddr);
-}
-
-void flush_tlb_kernel_page(unsigned long kaddr)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_start = kaddr;
-		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
-	} else
-		local_flush_tlb_kernel_page(kaddr);
-}
-
-void flush_tlb_range(struct vm_area_struct *vma,
-                     unsigned long start, unsigned long end)
-{
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_vma = vma;
-		ta.ta_start = start;
-		ta.ta_end = end;
-		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm));
-	} else
-		local_flush_tlb_range(vma, start, end);
-}
-
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+int setup_profiling_timer(unsigned int multiplier)
 {
-	if (tlb_ops_need_broadcast()) {
-		struct tlb_args ta;
-		ta.ta_start = start;
-		ta.ta_end = end;
-		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
-	} else
-		local_flush_tlb_kernel_range(start, end);
+	return -EINVAL;
 }
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
new file mode 100644
index 00000000000..7dcb35285be
--- /dev/null
+++ b/arch/arm/kernel/smp_tlb.c
@@ -0,0 +1,139 @@
+/*
+ *  linux/arch/arm/kernel/smp_tlb.c
+ *
+ *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/preempt.h>
+#include <linux/smp.h>
+
+#include <asm/smp_plat.h>
+#include <asm/tlbflush.h>
+
+static void on_each_cpu_mask(void (*func)(void *), void *info, int wait,
+	const struct cpumask *mask)
+{
+	preempt_disable();
+
+	smp_call_function_many(mask, func, info, wait);
+	if (cpumask_test_cpu(smp_processor_id(), mask))
+		func(info);
+
+	preempt_enable();
+}
+
+/**********************************************************************/
+
+/*
+ * TLB operations
+ */
+struct tlb_args {
+	struct vm_area_struct *ta_vma;
+	unsigned long ta_start;
+	unsigned long ta_end;
+};
+
+static inline void ipi_flush_tlb_all(void *ignored)
+{
+	local_flush_tlb_all();
+}
+
+static inline void ipi_flush_tlb_mm(void *arg)
+{
+	struct mm_struct *mm = (struct mm_struct *)arg;
+
+	local_flush_tlb_mm(mm);
+}
+
+static inline void ipi_flush_tlb_page(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_page(ta->ta_vma, ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_kernel_page(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_kernel_page(ta->ta_start);
+}
+
+static inline void ipi_flush_tlb_range(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_range(ta->ta_vma, ta->ta_start, ta->ta_end);
+}
+
+static inline void ipi_flush_tlb_kernel_range(void *arg)
+{
+	struct tlb_args *ta = (struct tlb_args *)arg;
+
+	local_flush_tlb_kernel_range(ta->ta_start, ta->ta_end);
+}
+
+void flush_tlb_all(void)
+{
+	if (tlb_ops_need_broadcast())
+		on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+	else
+		local_flush_tlb_all();
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	if (tlb_ops_need_broadcast())
+		on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm));
+	else
+		local_flush_tlb_mm(mm);
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = uaddr;
+		on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm));
+	} else
+		local_flush_tlb_page(vma, uaddr);
+}
+
+void flush_tlb_kernel_page(unsigned long kaddr)
+{
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = kaddr;
+		on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+	} else
+		local_flush_tlb_kernel_page(kaddr);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma,
+                     unsigned long start, unsigned long end)
+{
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_vma = vma;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm));
+	} else
+		local_flush_tlb_range(vma, start, end);
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+	if (tlb_ops_need_broadcast()) {
+		struct tlb_args ta;
+		ta.ta_start = start;
+		ta.ta_end = end;
+		on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+	} else
+		local_flush_tlb_kernel_range(start, end);
+}
+
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 35882fbf37f..dd790745b3e 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -127,8 +127,6 @@ static void __cpuinit twd_calibrate_rate(void)
  */
 void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 {
-	unsigned long flags;
-
 	twd_calibrate_rate();
 
 	clk->name = "local_timer";
@@ -143,20 +141,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
 
 	/* Make sure our local interrupt controller has this enabled */
-	local_irq_save(flags);
-	irq_to_desc(clk->irq)->status |= IRQ_NOPROBE;
-	get_irq_chip(clk->irq)->unmask(clk->irq);
-	local_irq_restore(flags);
+	gic_enable_ppi(clk->irq);
 
 	clockevents_register_device(clk);
 }
-
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * take a local timer down
- */
-void twd_timer_stop(void)
-{
-	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
-}
-#endif
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 20b7411e47f..c2e112e1a05 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -28,7 +28,7 @@ int notrace unwind_frame(struct stackframe *frame)
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+	high = ALIGN(low, THREAD_SIZE);
 
 	/* check current frame pointer is within bounds */
 	if (fp < (low + 12) || fp + 4 >= high)
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
new file mode 100644
index 00000000000..7a576092291
--- /dev/null
+++ b/arch/arm/kernel/swp_emulate.c
@@ -0,0 +1,267 @@
+/*
+ *  linux/arch/arm/kernel/swp_emulate.c
+ *
+ *  Copyright (C) 2009 ARM Limited
+ *  __user_* functions adapted from include/asm/uaccess.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Implements emulation of the SWP/SWPB instructions using load-exclusive and
+ *  store-exclusive for processors that have them disabled (or future ones that
+ *  might not implement them).
+ *
+ *  Syntax of SWP{B} instruction: SWP{B}<c> <Rt>, <Rt2>, [<Rn>]
+ *  Where: Rt  = destination
+ *	   Rt2 = source
+ *	   Rn  = address
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/sched.h>
+#include <linux/syscalls.h>
+#include <linux/perf_event.h>
+
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+
+/*
+ * Error-checking SWP macros implemented using ldrex{b}/strex{b}
+ */
+#define __user_swpX_asm(data, addr, res, temp, B)		\
+	__asm__ __volatile__(					\
+	"	mov		%2, %1\n"			\
+	"0:	ldrex"B"	%1, [%3]\n"			\
+	"1:	strex"B"	%0, %2, [%3]\n"			\
+	"	cmp		%0, #0\n"			\
+	"	movne		%0, %4\n"			\
+	"2:\n"							\
+	"	.section	 .fixup,\"ax\"\n"		\
+	"	.align		2\n"				\
+	"3:	mov		%0, %5\n"			\
+	"	b		2b\n"				\
+	"	.previous\n"					\
+	"	.section	 __ex_table,\"a\"\n"		\
+	"	.align		3\n"				\
+	"	.long		0b, 3b\n"			\
+	"	.long		1b, 3b\n"			\
+	"	.previous"					\
+	: "=&r" (res), "+r" (data), "=&r" (temp)		\
+	: "r" (addr), "i" (-EAGAIN), "i" (-EFAULT)		\
+	: "cc", "memory")
+
+#define __user_swp_asm(data, addr, res, temp) \
+	__user_swpX_asm(data, addr, res, temp, "")
+#define __user_swpb_asm(data, addr, res, temp) \
+	__user_swpX_asm(data, addr, res, temp, "b")
+
+/*
+ * Macros/defines for extracting register numbers from instruction.
+ */
+#define EXTRACT_REG_NUM(instruction, offset) \
+	(((instruction) & (0xf << (offset))) >> (offset))
+#define RN_OFFSET  16
+#define RT_OFFSET  12
+#define RT2_OFFSET  0
+/*
+ * Bit 22 of the instruction encoding distinguishes between
+ * the SWP and SWPB variants (bit set means SWPB).
+ */
+#define TYPE_SWPB (1 << 22)
+
+static unsigned long swpcounter;
+static unsigned long swpbcounter;
+static unsigned long abtcounter;
+static pid_t         previous_pid;
+
+#ifdef CONFIG_PROC_FS
+static int proc_read_status(char *page, char **start, off_t off, int count,
+			    int *eof, void *data)
+{
+	char *p = page;
+	int len;
+
+	p += sprintf(p, "Emulated SWP:\t\t%lu\n", swpcounter);
+	p += sprintf(p, "Emulated SWPB:\t\t%lu\n", swpbcounter);
+	p += sprintf(p, "Aborted SWP{B}:\t\t%lu\n", abtcounter);
+	if (previous_pid != 0)
+		p += sprintf(p, "Last process:\t\t%d\n", previous_pid);
+
+	len = (p - page) - off;
+	if (len < 0)
+		len = 0;
+
+	*eof = (len <= count) ? 1 : 0;
+	*start = page + off;
+
+	return len;
+}
+#endif
+
+/*
+ * Set up process info to signal segmentation fault - called on access error.
+ */
+static void set_segfault(struct pt_regs *regs, unsigned long addr)
+{
+	siginfo_t info;
+
+	if (find_vma(current->mm, addr) == NULL)
+		info.si_code = SEGV_MAPERR;
+	else
+		info.si_code = SEGV_ACCERR;
+
+	info.si_signo = SIGSEGV;
+	info.si_errno = 0;
+	info.si_addr  = (void *) instruction_pointer(regs);
+
+	pr_debug("SWP{B} emulation: access caused memory abort!\n");
+	arm_notify_die("Illegal memory access", regs, &info, 0, 0);
+
+	abtcounter++;
+}
+
+static int emulate_swpX(unsigned int address, unsigned int *data,
+			unsigned int type)
+{
+	unsigned int res = 0;
+
+	if ((type != TYPE_SWPB) && (address & 0x3)) {
+		/* SWP to unaligned address not permitted */
+		pr_debug("SWP instruction on unaligned pointer!\n");
+		return -EFAULT;
+	}
+
+	while (1) {
+		unsigned long temp;
+
+		/*
+		 * Barrier required between accessing protected resource and
+		 * releasing a lock for it. Legacy code might not have done
+		 * this, and we cannot determine that this is not the case
+		 * being emulated, so insert always.
+		 */
+		smp_mb();
+
+		if (type == TYPE_SWPB)
+			__user_swpb_asm(*data, address, res, temp);
+		else
+			__user_swp_asm(*data, address, res, temp);
+
+		if (likely(res != -EAGAIN) || signal_pending(current))
+			break;
+
+		cond_resched();
+	}
+
+	if (res == 0) {
+		/*
+		 * Barrier also required between aquiring a lock for a
+		 * protected resource and accessing the resource. Inserted for
+		 * same reason as above.
+		 */
+		smp_mb();
+
+		if (type == TYPE_SWPB)
+			swpbcounter++;
+		else
+			swpcounter++;
+	}
+
+	return res;
+}
+
+/*
+ * swp_handler logs the id of calling process, dissects the instruction, sanity
+ * checks the memory location, calls emulate_swpX for the actual operation and
+ * deals with fixup/error handling before returning
+ */
+static int swp_handler(struct pt_regs *regs, unsigned int instr)
+{
+	unsigned int address, destreg, data, type;
+	unsigned int res = 0;
+
+	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, 0, regs, regs->ARM_pc);
+
+	if (current->pid != previous_pid) {
+		pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n",
+			 current->comm, (unsigned long)current->pid);
+		previous_pid = current->pid;
+	}
+
+	address = regs->uregs[EXTRACT_REG_NUM(instr, RN_OFFSET)];
+	data	= regs->uregs[EXTRACT_REG_NUM(instr, RT2_OFFSET)];
+	destreg = EXTRACT_REG_NUM(instr, RT_OFFSET);
+
+	type = instr & TYPE_SWPB;
+
+	pr_debug("addr in r%d->0x%08x, dest is r%d, source in r%d->0x%08x)\n",
+		 EXTRACT_REG_NUM(instr, RN_OFFSET), address,
+		 destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
+
+	/* Check access in reasonable access range for both SWP and SWPB */
+	if (!access_ok(VERIFY_WRITE, (address & ~3), 4)) {
+		pr_debug("SWP{B} emulation: access to %p not allowed!\n",
+			 (void *)address);
+		res = -EFAULT;
+	} else {
+		res = emulate_swpX(address, &data, type);
+	}
+
+	if (res == 0) {
+		/*
+		 * On successful emulation, revert the adjustment to the PC
+		 * made in kernel/traps.c in order to resume execution at the
+		 * instruction following the SWP{B}.
+		 */
+		regs->ARM_pc += 4;
+		regs->uregs[destreg] = data;
+	} else if (res == -EFAULT) {
+		/*
+		 * Memory errors do not mean emulation failed.
+		 * Set up signal info to return SEGV, then return OK
+		 */
+		set_segfault(regs, address);
+	}
+
+	return 0;
+}
+
+/*
+ * Only emulate SWP/SWPB executed in ARM state/User mode.
+ * The kernel must be SWP free and SWP{B} does not exist in Thumb/ThumbEE.
+ */
+static struct undef_hook swp_hook = {
+	.instr_mask = 0x0fb00ff0,
+	.instr_val  = 0x01000090,
+	.cpsr_mask  = MODE_MASK | PSR_T_BIT | PSR_J_BIT,
+	.cpsr_val   = USR_MODE,
+	.fn	    = swp_handler
+};
+
+/*
+ * Register handler and create status file in /proc/cpu
+ * Invoked as late_initcall, since not needed before init spawned.
+ */
+static int __init swp_emulation_init(void)
+{
+#ifdef CONFIG_PROC_FS
+	struct proc_dir_entry *res;
+
+	res = create_proc_entry("cpu/swp_emulation", S_IRUGO, NULL);
+
+	if (!res)
+		return -ENOMEM;
+
+	res->read_proc = proc_read_status;
+#endif /* CONFIG_PROC_FS */
+
+	printk(KERN_NOTICE "Registering SWP/SWPB emulation handler\n");
+	register_undef_hook(&swp_hook);
+
+	return 0;
+}
+
+late_initcall(swp_emulation_init);
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 38c261f9951..f1e2eb19a67 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -30,12 +30,13 @@
 #include <asm/leds.h>
 #include <asm/thread_info.h>
 #include <asm/stacktrace.h>
+#include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 /*
  * Our system timer.
  */
-struct sys_timer *system_timer;
+static struct sys_timer *system_timer;
 
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
 /* this needs a better home */
@@ -160,6 +161,7 @@ device_initcall(timer_init_sysfs);
 
 void __init time_init(void)
 {
+	system_timer = machine_desc->timer;
 	system_timer->init();
 }
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index cda78d59aa3..ee57640ba2b 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -37,6 +37,8 @@
 
 static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
 
+void *vectors_page;
+
 #ifdef CONFIG_DEBUG_USER
 unsigned int user_debug;
 
@@ -53,10 +55,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
-	sprint_symbol(sym1, where);
-	sprint_symbol(sym2, from);
-	printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
+	printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
@@ -711,19 +710,19 @@ void __readwrite_bug(const char *fn)
 }
 EXPORT_SYMBOL(__readwrite_bug);
 
-void __pte_error(const char *file, int line, unsigned long val)
+void __pte_error(const char *file, int line, pte_t pte)
 {
-	printk("%s:%d: bad pte %08lx.\n", file, line, val);
+	printk("%s:%d: bad pte %08lx.\n", file, line, pte_val(pte));
 }
 
-void __pmd_error(const char *file, int line, unsigned long val)
+void __pmd_error(const char *file, int line, pmd_t pmd)
 {
-	printk("%s:%d: bad pmd %08lx.\n", file, line, val);
+	printk("%s:%d: bad pmd %08lx.\n", file, line, pmd_val(pmd));
 }
 
-void __pgd_error(const char *file, int line, unsigned long val)
+void __pgd_error(const char *file, int line, pgd_t pgd)
 {
-	printk("%s:%d: bad pgd %08lx.\n", file, line, val);
+	printk("%s:%d: bad pgd %08lx.\n", file, line, pgd_val(pgd));
 }
 
 asmlinkage void __div0(void)
@@ -759,7 +758,11 @@ static void __init kuser_get_tls_init(unsigned long vectors)
 
 void __init early_trap_init(void)
 {
+#if defined(CONFIG_CPU_USE_DOMAINS)
 	unsigned long vectors = CONFIG_VECTORS_BASE;
+#else
+	unsigned long vectors = (unsigned long)vectors_page;
+#endif
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	extern char __kuser_helper_start[], __kuser_helper_end[];
@@ -783,10 +786,10 @@ void __init early_trap_init(void)
 	 * Copy signal return handlers into the vector page, and
 	 * set sigreturn to be a pointer to these.
 	 */
-	memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
-	       sizeof(sigreturn_codes));
-	memcpy((void *)KERN_RESTART_CODE, syscall_restart_code,
-	       sizeof(syscall_restart_code));
+	memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
+	       sigreturn_codes, sizeof(sigreturn_codes));
+	memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE),
+	       syscall_restart_code, sizeof(syscall_restart_code));
 
 	flush_icache_range(vectors, vectors + PAGE_SIZE);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 2a161765f6d..d2cb0b3c987 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -279,7 +279,7 @@ int unwind_frame(struct stackframe *frame)
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+	high = ALIGN(low, THREAD_SIZE);
 
 	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
 		 frame->pc, frame->lr, frame->sp);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index cead8893b46..86b66f3f203 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -101,6 +101,7 @@ SECTIONS
 			__exception_text_start = .;
 			*(.exception.text)
 			__exception_text_end = .;
+			IRQENTRY_TEXT
 			TEXT_TEXT
 			SCHED_TEXT
 			LOCK_TEXT
@@ -167,6 +168,7 @@ SECTIONS
 
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(32)
+		READ_MOSTLY_DATA(32)
 
 		/*
 		 * The exception fixup table (might need resorting at runtime)
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index 1e4cbd4e7be..64f6bc1a913 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be)
  */
 .L_found:
 #if __LINUX_ARM_ARCH__ >= 5
-		rsb	r1, r3, #0
-		and	r3, r3, r1
+		rsb	r0, r3, #0
+		and	r3, r3, r0
 		clz	r3, r3
 		rsb	r3, r3, #31
 		add	r0, r2, r3
@@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be)
 		addeq	r2, r2, #1
 		mov	r0, r2
 #endif
+		cmp	r1, r0			@ Clamp to maxbit
+		movlo	r0, r1
 		mov	pc, lr
 
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index b1631a7dbe7..1b049cd7a49 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -28,20 +28,21 @@
  */
 #include <linux/linkage.h>
 #include <asm/errno.h>
+#include <asm/domain.h>
 
 ENTRY(__get_user_1)
-1:	ldrbt	r2, [r0]
+1:	T(ldrb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_1)
 
 ENTRY(__get_user_2)
 #ifdef CONFIG_THUMB2_KERNEL
-2:	ldrbt	r2, [r0]
-3:	ldrbt	r3, [r0, #1]
+2:	T(ldrb)	r2, [r0]
+3:	T(ldrb)	r3, [r0, #1]
 #else
-2:	ldrbt	r2, [r0], #1
-3:	ldrbt	r3, [r0]
+2:	T(ldrb)	r2, [r0], #1
+3:	T(ldrb)	r3, [r0]
 #endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
@@ -53,7 +54,7 @@ ENTRY(__get_user_2)
 ENDPROC(__get_user_2)
 
 ENTRY(__get_user_4)
-4:	ldrt	r2, [r0]
+4:	T(ldr)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_4)
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 5a01a23c6c0..c023fc11e86 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -28,9 +28,10 @@
  */
 #include <linux/linkage.h>
 #include <asm/errno.h>
+#include <asm/domain.h>
 
 ENTRY(__put_user_1)
-1:	strbt	r2, [r0]
+1:	T(strb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_1)
@@ -39,19 +40,19 @@ ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
 #ifdef CONFIG_THUMB2_KERNEL
 #ifndef __ARMEB__
-2:	strbt	r2, [r0]
-3:	strbt	ip, [r0, #1]
+2:	T(strb)	r2, [r0]
+3:	T(strb)	ip, [r0, #1]
 #else
-2:	strbt	ip, [r0]
-3:	strbt	r2, [r0, #1]
+2:	T(strb)	ip, [r0]
+3:	T(strb)	r2, [r0, #1]
 #endif
 #else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
-2:	strbt	r2, [r0], #1
-3:	strbt	ip, [r0]
+2:	T(strb)	r2, [r0], #1
+3:	T(strb)	ip, [r0]
 #else
-2:	strbt	ip, [r0], #1
-3:	strbt	r2, [r0]
+2:	T(strb)	ip, [r0], #1
+3:	T(strb)	r2, [r0]
 #endif
 #endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
@@ -59,18 +60,18 @@ ENTRY(__put_user_2)
 ENDPROC(__put_user_2)
 
 ENTRY(__put_user_4)
-4:	strt	r2, [r0]
+4:	T(str)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_4)
 
 ENTRY(__put_user_8)
 #ifdef CONFIG_THUMB2_KERNEL
-5:	strt	r2, [r0]
-6:	strt	r3, [r0, #4]
+5:	T(str)	r2, [r0]
+6:	T(str)	r3, [r0, #4]
 #else
-5:	strt	r2, [r0], #4
-6:	strt	r3, [r0]
+5:	T(str)	r2, [r0], #4
+6:	T(str)	r3, [r0]
 #endif
 	mov	r0, #0
 	mov	pc, lr
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index fee9f6f88ad..d0ece2aeb70 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -14,6 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/errno.h>
+#include <asm/domain.h>
 
 		.text
 
@@ -31,11 +32,11 @@
 		rsb	ip, ip, #4
 		cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		strbt	r3, [r0], #1)			@ May fault
+USER(		T(strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		strgebt	r3, [r0], #1)			@ May fault
+USER(		T(strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		strgtbt	r3, [r0], #1)			@ May fault
+USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		sub	r2, r2, ip
 		b	.Lc2u_dest_aligned
 
@@ -58,7 +59,7 @@ ENTRY(__copy_to_user)
 		addmi	ip, r2, #4
 		bmi	.Lc2u_0nowords
 		ldr	r3, [r1], #4
-USER(		strt	r3, [r0], #4)			@ May fault
+USER(		T(str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -87,18 +88,18 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
 		tst	ip, #4
 		ldrne	r3, [r1], #4
-		strnet	r3, [r0], #4			@ Shouldnt fault
+		T(strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_0fupi
 .Lc2u_0nowords:	teq	ip, #0
 		beq	.Lc2u_finished
 .Lc2u_nowords:	cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		strbt	r3, [r0], #1)			@ May fault
+USER(		T(strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		strgebt	r3, [r0], #1)			@ May fault
+USER(		T(strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		strgtbt	r3, [r0], #1)			@ May fault
+USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_not_enough:
@@ -119,7 +120,7 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #8
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #24
-USER(		strt	r3, [r0], #4)			@ May fault
+USER(		T(str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -154,18 +155,18 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #8
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #24
-		strnet	r3, [r0], #4			@ Shouldnt fault
+		T(strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_1fupi
 .Lc2u_1nowords:	mov	r3, r7, get_byte_1
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		strbt	r3, [r0], #1)			@ May fault
+USER(		T(strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_2
-USER(		strgebt	r3, [r0], #1)			@ May fault
+USER(		T(strgeb) r3, [r0], #1)			@ May fault
 		movgt	r3, r7, get_byte_3
-USER(		strgtbt	r3, [r0], #1)			@ May fault
+USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_2fupi:	subs	r2, r2, #4
@@ -174,7 +175,7 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #16
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #16
-USER(		strt	r3, [r0], #4)			@ May fault
+USER(		T(str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -209,18 +210,18 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #16
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #16
-		strnet	r3, [r0], #4			@ Shouldnt fault
+		T(strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_2fupi
 .Lc2u_2nowords:	mov	r3, r7, get_byte_2
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		strbt	r3, [r0], #1)			@ May fault
+USER(		T(strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_3
-USER(		strgebt	r3, [r0], #1)			@ May fault
+USER(		T(strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		strgtbt	r3, [r0], #1)			@ May fault
+USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 
 .Lc2u_3fupi:	subs	r2, r2, #4
@@ -229,7 +230,7 @@ USER(		strgtbt	r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #24
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #8
-USER(		strt	r3, [r0], #4)			@ May fault
+USER(		T(str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@@ -264,18 +265,18 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #24
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #8
-		strnet	r3, [r0], #4			@ Shouldnt fault
+		T(strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_3fupi
 .Lc2u_3nowords:	mov	r3, r7, get_byte_3
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		strbt	r3, [r0], #1)			@ May fault
+USER(		T(strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		strgebt	r3, [r0], #1)			@ May fault
+USER(		T(strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		strgtbt	r3, [r0], #1)			@ May fault
+USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 ENDPROC(__copy_to_user)
 
@@ -294,11 +295,11 @@ ENDPROC(__copy_to_user)
 .Lcfu_dest_not_aligned:
 		rsb	ip, ip, #4
 		cmp	ip, #2
-USER(		ldrbt	r3, [r1], #1)			@ May fault
+USER(		T(ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		ldrgebt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		ldrgtbt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		sub	r2, r2, ip
 		b	.Lcfu_dest_aligned
@@ -321,7 +322,7 @@ ENTRY(__copy_from_user)
 .Lcfu_0fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lcfu_0nowords
-USER(		ldrt	r3, [r1], #4)
+USER(		T(ldr)	r3, [r1], #4)
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
@@ -350,18 +351,18 @@ USER(		ldrt	r3, [r1], #4)
 		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
-		ldrnet	r3, [r1], #4			@ Shouldnt fault
+		T(ldrne) r3, [r1], #4			@ Shouldnt fault
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
 		beq	.Lcfu_0fupi
 .Lcfu_0nowords:	teq	ip, #0
 		beq	.Lcfu_finished
 .Lcfu_nowords:	cmp	ip, #2
-USER(		ldrbt	r3, [r1], #1)			@ May fault
+USER(		T(ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		ldrgebt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		ldrgtbt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 
@@ -374,7 +375,7 @@ USER(		ldrgtbt	r3, [r1], #1)			@ May fault
 
 .Lcfu_src_not_aligned:
 		bic	r1, r1, #3
-USER(		ldrt	r7, [r1], #4)			@ May fault
+USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		cmp	ip, #2
 		bgt	.Lcfu_3fupi
 		beq	.Lcfu_2fupi
@@ -382,7 +383,7 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_1nowords
 		mov	r3, r7, pull #8
-USER(		ldrt	r7, [r1], #4)			@ May fault
+USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #24
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -417,7 +418,7 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #8
-USER(		ldrnet	r7, [r1], #4)			@ May fault
+USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #24
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -437,7 +438,7 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_2nowords
 		mov	r3, r7, pull #16
-USER(		ldrt	r7, [r1], #4)			@ May fault
+USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #16
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -473,7 +474,7 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #16
-USER(		ldrnet	r7, [r1], #4)			@ May fault
+USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #16
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -485,7 +486,7 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		strb	r3, [r0], #1
 		movge	r3, r7, get_byte_3
 		strgeb	r3, [r0], #1
-USER(		ldrgtbt	r3, [r1], #0)			@ May fault
+USER(		T(ldrgtb) r3, [r1], #0)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 
@@ -493,7 +494,7 @@ USER(		ldrgtbt	r3, [r1], #0)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_3nowords
 		mov	r3, r7, pull #24
-USER(		ldrt	r7, [r1], #4)			@ May fault
+USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #8
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@@ -528,7 +529,7 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #24
-USER(		ldrnet	r7, [r1], #4)			@ May fault
+USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #8
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@@ -538,9 +539,9 @@ USER(		ldrnet	r7, [r1], #4)			@ May fault
 		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
-USER(		ldrgebt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		ldrgtbt	r3, [r1], #1)			@ May fault
+USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 ENDPROC(__copy_from_user)
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
index cff4e0a996c..a6299e8321b 100644
--- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -11,6 +11,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END		0xd0000000
+#define VMALLOC_END		0xd0000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 821eb842795..d13add71f72 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
-obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
+obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-rm9200dk.o
+obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-rm9200ek.o
 obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
 obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
 obj-$(CONFIG_MACH_CARMEVA)	+= board-carmeva.o
@@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o
+obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o board-stamp9g20.o
 
 # AT91SAM9260/AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 9338825cfcd..7b539228e0e 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins)
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91rm9200_uart0_device;
-				at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
-				at91_uarts[i] = &at91rm9200_uart1_device;
-				at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(0);
-				at91_uarts[i] = &at91rm9200_uart2_device;
-				at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_usart3_pins(0);
-				at91_uarts[i] = &at91rm9200_uart3_device;
-				at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
-				break;
-			case 4:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91rm9200_dbgu_device;
-				at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 2500f41d8d2..1dd69c85dfe 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -101,7 +101,6 @@ static struct clocksource clk32k = {
 	.rating		= 150,
 	.read		= read_clk32k,
 	.mask		= CLOCKSOURCE_MASK(20),
-	.shift		= 10,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -201,8 +200,7 @@ void __init at91rm9200_timer_init(void)
 	clockevents_register_device(&clkevt);
 
 	/* register clocksource */
-	clk32k.mult = clocksource_hz2mult(AT91_SLOW_CLOCK, clk32k.shift);
-	clocksource_register(&clk32k);
+	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
 }
 
 struct sys_timer at91rm9200_timer = {
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 608a63240b6..4ba85499fa9 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -51,7 +51,6 @@ static struct clocksource pit_clk = {
 	.name		= "pit",
 	.rating		= 175,
 	.read		= read_pit_clk,
-	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -163,10 +162,9 @@ static void __init at91sam926x_pit_init(void)
 	 * Register clocksource.  The high order bits of PIV are unused,
 	 * so this isn't a 32-bit counter unless we get clockevent irqs.
 	 */
-	pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift);
 	bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
 	pit_clk.mask = CLOCKSOURCE_MASK(bits);
-	clocksource_register(&pit_clk);
+	clocksource_register_hz(&pit_clk, pit_rate);
 
 	/* Set up irq handler */
 	setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 46bdc82d3fb..8a3fc84847c 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -39,24 +39,24 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata onearm_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 4, 0, 1, -1, -1 },		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init onearm_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&onearm_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init onearm_init_irq(void)
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index c0ce79d431a..d2e1f4ec1fc 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -39,17 +39,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata kafa_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 0, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init kafa_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
@@ -58,8 +47,14 @@ static void __init kafa_map_io(void)
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&kafa_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init kafa_init_irq(void)
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index bba5a560e02..feb65787c30 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -31,6 +31,7 @@
 
 #include <mach/board.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/stamp9g20.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
@@ -38,11 +39,7 @@
 
 static void __init pcontrol_g20_map_io(void)
 {
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */
-	at91_register_uart(0, 0, 0);
+	stamp9g20_map_io();
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
@@ -54,9 +51,6 @@ static void __init pcontrol_g20_map_io(void)
 
 	/* USART2 on ttyS3. (Rx, Tx)  9bit-Bus  Multidrop-mode  X4 */
 	at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 
@@ -66,38 +60,6 @@ static void __init init_irq(void)
 }
 
 
-/*
- * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB
- */
-static struct atmel_nand_data __initdata nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-};
-
-/*
- * Bus timings; unit = 7.57ns
- */
-static struct sam9_smc_config __initdata nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 4,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 4,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 7,
-	.write_cycle		= 7,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE
-			| AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 3,
-};
-
 static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 	.ncs_read_setup		= 16,
 	.nrd_setup		= 18,
@@ -138,14 +100,6 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
 	.tdf_cycles		= 1,
 } };
 
-static void __init add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &nand_smc_config);
-	at91_add_device_nand(&nand_data);
-}
-
-
 static void __init add_device_pcontrol(void)
 {
 	/* configure chip-select 4 (IO compatible to 8051  X4 ) */
@@ -156,23 +110,6 @@ static void __init add_device_pcontrol(void)
 
 
 /*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata mmc_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-	},
-};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
-	.wire4		= 1,
-};
-#endif
-
-
-/*
  * USB Host port
  */
 static struct at91_usbh_data __initdata usbh_data = {
@@ -265,42 +202,13 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = {
 };
 
 
-/*
- * Dallas 1-Wire  DS2431
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
-	.pin		= AT91_PIN_PA29,
-	.is_open_drain	= 1,
-};
-
-static struct platform_device w1_device = {
-	.name			= "w1-gpio",
-	.id			= -1,
-	.dev.platform_data	= &w1_gpio_pdata,
-};
-
-static void add_wire1(void)
-{
-	at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
-	at91_set_multi_drive(w1_gpio_pdata.pin, 1);
-	platform_device_register(&w1_device);
-}
-
-
 static void __init pcontrol_g20_board_init(void)
 {
-	at91_add_device_serial();
-	add_device_nand();
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-	at91_add_device_mci(0, &mmc_data);
-#else
-	at91_add_device_mmc(0, &mmc_data);
-#endif
+	stamp9g20_board_init();
 	at91_add_device_usbh(&usbh_data);
 	at91_add_device_eth(&macb_data);
 	at91_add_device_i2c(pcontrol_g20_i2c_devices,
 		ARRAY_SIZE(pcontrol_g20_i2c_devices));
-	add_wire1();
 	add_device_pcontrol();
 	at91_add_device_spi(pcontrol_g20_spi_devices,
 		ARRAY_SIZE(pcontrol_g20_spi_devices));
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 9d833bbc592..55dad3a4654 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -43,24 +43,21 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata picotux200_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init picotux200_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91rm9200_initialize(18432000, AT91RM9200_BGA);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&picotux200_uart_config);
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			  | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			  | ATMEL_UART_RI);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init picotux200_init_irq(void)
@@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = {
 	.ports		= 1,
 };
 
-// static struct at91_udc_data __initdata picotux200_udc_data = {
-// 	.vbus_pin	= AT91_PIN_PD4,
-// 	.pullup_pin	= AT91_PIN_PD5,
-// };
-
 static struct at91_mmc_data __initdata picotux200_mmc_data = {
 	.det_pin	= AT91_PIN_PB27,
 	.slot_b		= 0,
@@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
 	.wp_pin		= AT91_PIN_PA17,
 };
 
-// static struct spi_board_info picotux200_spi_devices[] = {
-// 	{	/* DataFlash chip */
-// 		.modalias	= "mtd_dataflash",
-// 		.chip_select	= 0,
-// 		.max_speed_hz	= 15 * 1000 * 1000,
-// 	},
-// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-// 	{	/* DataFlash card */
-// 		.modalias	= "mtd_dataflash",
-// 		.chip_select	= 3,
-// 		.max_speed_hz	= 15 * 1000 * 1000,
-// 	},
-// #endif
-// };
-
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
 #define PICOTUX200_FLASH_SIZE	SZ_4M
 
@@ -135,21 +112,11 @@ static void __init picotux200_board_init(void)
 	at91_add_device_eth(&picotux200_eth_data);
 	/* USB Host */
 	at91_add_device_usbh(&picotux200_usbh_data);
-	/* USB Device */
-	// at91_add_device_udc(&picotux200_udc_data);
-	// at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
-	/* SPI */
-	// at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	/* DataFlash card */
-	at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
 	at91_add_device_mmc(0, &picotux200_mmc_data);
-#endif
 	/* NOR Flash */
 	platform_device_register(&picotux200_flash);
 }
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index e14f0e16568..4c1047c8200 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91/board-dk.c
+ * linux/arch/arm/mach-at91/board-rm9200dk.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = {
 	// .vcc_pin	= ... always powered
 };
 
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata dk_mmc_data = {
 	.slot_b		= 0,
 	.wire4		= 1,
 };
+#endif
 
 static struct spi_board_info dk_spi_devices[] = {
 	{	/* DataFlash chip */
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 56e92c4bbc2..9df1be8818c 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91/board-ek.c
+ * linux/arch/arm/mach-at91/board-rm9200ek.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = {
 	.pullup_pin	= AT91_PIN_PD5,
 };
 
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
 static struct at91_mmc_data __initdata ek_mmc_data = {
 	.det_pin	= AT91_PIN_PB27,
 	.slot_b		= 0,
 	.wire4		= 1,
 	.wp_pin		= AT91_PIN_PA17,
 };
+#endif
 
 static struct spi_board_info ek_spi_devices[] = {
 	{	/* DataFlash chip */
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 5206eef4a67..f8902b11896 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -32,7 +32,7 @@
 #include "generic.h"
 
 
-static void __init portuxg20_map_io(void)
+void __init stamp9g20_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -40,6 +40,24 @@ static void __init portuxg20_map_io(void)
 	/* DGBU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init stamp9g20evb_map_io(void)
+{
+	stamp9g20_map_io();
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+						| ATMEL_UART_DTR | ATMEL_UART_DSR
+						| ATMEL_UART_DCD | ATMEL_UART_RI);
+}
+
+static void __init portuxg20_map_io(void)
+{
+	stamp9g20_map_io();
+
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
 						| ATMEL_UART_DTR | ATMEL_UART_DSR
@@ -56,26 +74,6 @@ static void __init portuxg20_map_io(void)
 
 	/* USART5 on ttyS6. (Rx, Tx only) */
 	at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init stamp9g20_map_io(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91sam9260_initialize(18432000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-						| ATMEL_UART_DTR | ATMEL_UART_DSR
-						| ATMEL_UART_DCD | ATMEL_UART_RI);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 static void __init init_irq(void)
@@ -156,7 +154,7 @@ static struct at91_udc_data __initdata portuxg20_udc_data = {
 	.pullup_pin	= 0,		/* pull-up driven by UDC */
 };
 
-static struct at91_udc_data __initdata stamp9g20_udc_data = {
+static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
 	.vbus_pin	= AT91_PIN_PA22,
 	.pullup_pin	= 0,		/* pull-up driven by UDC */
 };
@@ -190,7 +188,7 @@ static struct gpio_led portuxg20_leds[] = {
 	}
 };
 
-static struct gpio_led stamp9g20_leds[] = {
+static struct gpio_led stamp9g20evb_leds[] = {
 	{
 		.name			= "D8",
 		.gpio			= AT91_PIN_PB18,
@@ -250,7 +248,7 @@ void add_w1(void)
 }
 
 
-static void __init generic_board_init(void)
+void __init stamp9g20_board_init(void)
 {
 	/* Serial */
 	at91_add_device_serial();
@@ -262,34 +260,40 @@ static void __init generic_board_init(void)
 #else
 	at91_add_device_mmc(0, &mmc_data);
 #endif
-	/* USB Host */
-	at91_add_device_usbh(&usbh_data);
-	/* Ethernet */
-	at91_add_device_eth(&macb_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
 	/* W1 */
 	add_w1();
 }
 
 static void __init portuxg20_board_init(void)
 {
-	generic_board_init();
-	/* SPI */
-	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+	stamp9g20_board_init();
+	/* USB Host */
+	at91_add_device_usbh(&usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&portuxg20_udc_data);
+	/* Ethernet */
+	at91_add_device_eth(&macb_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+	/* SPI */
+	at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
 	/* LEDs */
 	at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
 }
 
-static void __init stamp9g20_board_init(void)
+static void __init stamp9g20evb_board_init(void)
 {
-	generic_board_init();
+	stamp9g20_board_init();
+	/* USB Host */
+	at91_add_device_usbh(&usbh_data);
 	/* USB Device */
-	at91_add_device_udc(&stamp9g20_udc_data);
+	at91_add_device_udc(&stamp9g20evb_udc_data);
+	/* Ethernet */
+	at91_add_device_eth(&macb_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
 	/* LEDs */
-	at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+	at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
 }
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
@@ -305,7 +309,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
 	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= stamp9g20_map_io,
+	.map_io		= stamp9g20evb_map_io,
 	.init_irq	= init_irq,
-	.init_machine	= stamp9g20_board_init,
+	.init_machine	= stamp9g20evb_board_init,
 MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 89df00a9d2f..e0f0080eb63 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = {
  * EPSON S1D13806 FB (discontinued chip)
  * EPSON S1D13506 FB
  */
-#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>
 
 
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 7525cee3983..9113da6845f 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -658,7 +658,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
 	/* Now set uhpck values */
 	uhpck.parent = &utmi_clk;
 	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
-	uhpck.rate_hz = utmi_clk.parent->rate_hz;
+	uhpck.rate_hz = utmi_clk.rate_hz;
 	uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
 }
 
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
index 57f8ee15494..27ac6f550fe 100644
--- a/arch/arm/mach-at91/include/mach/at91_mci.h
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -74,6 +74,8 @@
 #define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
 #define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
 #define			AT91_MCI_TRTYP_STREAM	(2 << 19)
+#define			AT91_MCI_TRTYP_SDIO_BYTE	(4 << 19)
+#define			AT91_MCI_TRTYP_SDIO_BLOCK	(5 << 19)
 
 #define AT91_MCI_BLKR		0x18		/* Block Register */
 #define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 58528aa9c8a..2b499eb343a 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de
 extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
 extern void __init at91_set_serial_console(unsigned portnr);
 
-struct at91_uart_config {
-	unsigned short	console_tty;	/* tty number of serial console */
-	unsigned short	nr_tty;		/* number of serial tty's */
-	short		tty_map[];	/* map UART to tty number */
-};
 extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
 
 struct atmel_uart_data {
 	short			use_dma_tx;	/* use transmit DMA? */
diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h
new file mode 100644
index 00000000000..6120f9c46d5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/stamp9g20.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_STAMP9G20_H
+#define __MACH_STAMP9G20_H
+
+void stamp9g20_map_io(void);
+void stamp9g20_board_init(void);
+
+#endif
diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c
index 14bafc38f2d..ad237a42d26 100644
--- a/arch/arm/mach-bcmring/clock.c
+++ b/arch/arm/mach-bcmring/clock.c
@@ -21,13 +21,12 @@
 #include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/spinlock.h>
+#include <linux/clkdev.h>
 #include <mach/csp/hw_cfg.h>
 #include <mach/csp/chipcHw_def.h>
 #include <mach/csp/chipcHw_reg.h>
 #include <mach/csp/chipcHw_inline.h>
 
-#include <asm/clkdev.h>
-
 #include "clock.h"
 
 #define clk_is_primary(x)       ((x)->type & CLK_TYPE_PRIMARY)
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index d3f959e92b2..8fc2035759f 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -30,10 +30,10 @@
 #include <linux/amba/bus.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
+#include <linux/clkdev.h>
 
 #include <mach/csp/mm_addr.h>
 #include <mach/hardware.h>
-#include <asm/clkdev.h>
 #include <linux/io.h>
 #include <asm/irq.h>
 #include <asm/hardware/arm_timer.h>
@@ -294,7 +294,6 @@ static struct clocksource clocksource_bcmring_timer1 = {
 	.rating = 200,
 	.read = bcmring_get_cycles_timer1,
 	.mask = CLOCKSOURCE_MASK(32),
-	.shift = 20,
 	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -303,7 +302,6 @@ static struct clocksource clocksource_bcmring_timer3 = {
 	.rating = 100,
 	.read = bcmring_get_cycles_timer3,
 	.mask = CLOCKSOURCE_MASK(32),
-	.shift = 20,
 	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -316,10 +314,8 @@ static int __init bcmring_clocksource_init(void)
 	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
 	       TIMER1_VA_BASE + TIMER_CTRL);
 
-	clocksource_bcmring_timer1.mult =
-	    clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
-				 clocksource_bcmring_timer1.shift);
-	clocksource_register(&clocksource_bcmring_timer1);
+	clocksource_register_khz(&clocksource_bcmring_timer1,
+				 TIMER1_FREQUENCY_MHZ * 1000);
 
 	/* setup timer3 as free-running clocksource */
 	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
@@ -328,10 +324,8 @@ static int __init bcmring_clocksource_init(void)
 	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
 	       TIMER3_VA_BASE + TIMER_CTRL);
 
-	clocksource_bcmring_timer3.mult =
-	    clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
-				 clocksource_bcmring_timer3.shift);
-	clocksource_register(&clocksource_bcmring_timer3);
+	clocksource_register_khz(&clocksource_bcmring_timer3,
+				 TIMER3_FREQUENCY_KHZ);
 
 	return 0;
 }
diff --git a/arch/arm/mach-bcmring/include/mach/vmalloc.h b/arch/arm/mach-bcmring/include/mach/vmalloc.h
index 3db3a09fd39..7397bd7817d 100644
--- a/arch/arm/mach-bcmring/include/mach/vmalloc.h
+++ b/arch/arm/mach-bcmring/include/mach/vmalloc.h
@@ -22,4 +22,4 @@
  * 0xe0000000 to 0xefffffff. This gives us 256 MB of vm space and handles
  * larger physical memory designs better.
  */
-#define VMALLOC_END       0xf0000000
+#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
index 30b3a287ed8..467b96137e4 100644
--- a/arch/arm/mach-clps711x/include/mach/vmalloc.h
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-cns3xxx/Kconfig b/arch/arm/mach-cns3xxx/Kconfig
index 9ebfcc46feb..29b13f249aa 100644
--- a/arch/arm/mach-cns3xxx/Kconfig
+++ b/arch/arm/mach-cns3xxx/Kconfig
@@ -3,6 +3,7 @@ menu "CNS3XXX platform type"
 
 config MACH_CNS3420VB
 	bool "Support for CNS3420 Validation Board"
+	select MIGHT_HAVE_PCI
 	help
 	  Include support for the Cavium Networks CNS3420 MPCore Platform
 	  Baseboard.
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 90fe9ab8591..08e5c875950 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/compiler.h>
 #include <linux/io.h>
+#include <linux/dma-mapping.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
@@ -108,10 +109,63 @@ static void __init cns3420_early_serial_setup(void)
 }
 
 /*
+ * USB
+ */
+static struct resource cns3xxx_usb_ehci_resources[] = {
+	[0] = {
+		.start = CNS3XXX_USB_BASE,
+		.end   = CNS3XXX_USB_BASE + SZ_16M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CNS3XXX_USB_EHCI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static u64 cns3xxx_usb_ehci_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_usb_ehci_device = {
+	.name          = "cns3xxx-ehci",
+	.num_resources = ARRAY_SIZE(cns3xxx_usb_ehci_resources),
+	.resource      = cns3xxx_usb_ehci_resources,
+	.dev           = {
+		.dma_mask          = &cns3xxx_usb_ehci_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource cns3xxx_usb_ohci_resources[] = {
+	[0] = {
+		.start = CNS3XXX_USB_OHCI_BASE,
+		.end   = CNS3XXX_USB_OHCI_BASE + SZ_16M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_CNS3XXX_USB_OHCI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static u64 cns3xxx_usb_ohci_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device cns3xxx_usb_ohci_device = {
+	.name          = "cns3xxx-ohci",
+	.num_resources = ARRAY_SIZE(cns3xxx_usb_ohci_resources),
+	.resource      = cns3xxx_usb_ohci_resources,
+	.dev           = {
+		.dma_mask          = &cns3xxx_usb_ohci_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+/*
  * Initialization
  */
 static struct platform_device *cns3420_pdevs[] __initdata = {
 	&cns3420_nor_pdev,
+	&cns3xxx_usb_ehci_device,
+	&cns3xxx_usb_ohci_device,
 };
 
 static void __init cns3420_init(void)
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 9ca4d581016..da30078a80c 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -69,13 +69,10 @@ void __init cns3xxx_map_io(void)
 }
 
 /* used by entry-macro.S */
-void __iomem *gic_cpu_base_addr;
-
 void __init cns3xxx_init_irq(void)
 {
-	gic_cpu_base_addr = __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT);
-	gic_dist_init(0, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), 29);
-	gic_cpu_init(0, gic_cpu_base_addr);
+	gic_init(0, 29, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT),
+		 __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT));
 }
 
 void cns3xxx_power_off(void)
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index 6b33ec11346..ffeb3a8b73b 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -11,13 +11,10 @@
 #ifndef __CNS3XXX_CORE_H
 #define __CNS3XXX_CORE_H
 
-extern void __iomem *gic_cpu_base_addr;
 extern struct sys_timer cns3xxx_timer;
 
 void __init cns3xxx_map_io(void);
 void __init cns3xxx_init_irq(void);
 void cns3xxx_power_off(void);
-void cns3xxx_pwr_power_up(unsigned int block);
-void cns3xxx_pwr_power_down(unsigned int block);
 
 #endif /* __CNS3XXX_CORE_H */
diff --git a/arch/arm/mach-cns3xxx/devices.c b/arch/arm/mach-cns3xxx/devices.c
index 50b4d31c27c..79d1fb02c23 100644
--- a/arch/arm/mach-cns3xxx/devices.c
+++ b/arch/arm/mach-cns3xxx/devices.c
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <mach/cns3xxx.h>
 #include <mach/irqs.h>
+#include <mach/pm.h>
 #include "core.h"
 #include "devices.h"
 
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 6dbce13771c..191c8e57f28 100644
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -165,7 +165,6 @@
 #define CNS3XXX_USBOTG_BASE_VIRT		0xFFF15000
 
 #define CNS3XXX_USB_BASE			0x82000000	/* USB Host Control */
-#define CNS3XXX_USB_BASE_VIRT			0xFFF16000
 
 #define CNS3XXX_SATA2_BASE			0x83000000	/* SATA */
 #define CNS3XXX_SATA2_SIZE			SZ_16M
@@ -184,7 +183,6 @@
 #define CNS3XXX_2DG_BASE_VIRT			0xFFF1B000
 
 #define CNS3XXX_USB_OHCI_BASE			0x88000000	/* USB OHCI */
-#define CNS3XXX_USB_OHCI_BASE_VIRT		0xFFF1C000
 
 #define CNS3XXX_L2C_BASE			0x92000000	/* L2 Cache Control */
 #define CNS3XXX_L2C_BASE_VIRT			0xFFF27000
diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
index 5e1c5545680..6bd83ed90af 100644
--- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
@@ -9,74 +9,10 @@
  */
 
 #include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
 
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #29
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
-
-		/* As above, this assumes that irqstat and base are preserved.. */
-
-		.macro test_for_ltirq, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		mov 	\tmp, #0
-		cmp	\irqnr, #29
-		moveq	\tmp, #1
-		streq	\irqstat, [\base, #GIC_CPU_EOI]
-		cmp	\tmp, #0
-		.endm
diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/include/mach/pm.h
new file mode 100644
index 00000000000..6eae7f764d1
--- /dev/null
+++ b/arch/arm/mach-cns3xxx/include/mach/pm.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2000 Deep Blue Solutions Ltd
+ * Copyright 2004 ARM Limited
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CNS3XXX_PM_H
+#define __CNS3XXX_PM_H
+
+#include <asm/atomic.h>
+
+void cns3xxx_pwr_clk_en(unsigned int block);
+void cns3xxx_pwr_clk_dis(unsigned int block);
+void cns3xxx_pwr_power_up(unsigned int block);
+void cns3xxx_pwr_power_down(unsigned int block);
+
+extern atomic_t usb_pwr_ref;
+
+#endif /* __CNS3XXX_PM_H */
diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c
index 38088c36936..78defd71a82 100644
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void)
 {
 	int i;
 
-	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
+	hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
 			"imprecise external abort");
 
 	for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c
index 38e44706fea..5e579552aa5 100644
--- a/arch/arm/mach-cns3xxx/pm.c
+++ b/arch/arm/mach-cns3xxx/pm.c
@@ -6,10 +6,14 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/init.h>
+#include <linux/module.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <asm/atomic.h>
 #include <mach/system.h>
 #include <mach/cns3xxx.h>
+#include <mach/pm.h>
 
 void cns3xxx_pwr_clk_en(unsigned int block)
 {
@@ -18,6 +22,16 @@ void cns3xxx_pwr_clk_en(unsigned int block)
 	reg |= (block & PM_CLK_GATE_REG_MASK);
 	__raw_writel(reg, PM_CLK_GATE_REG);
 }
+EXPORT_SYMBOL(cns3xxx_pwr_clk_en);
+
+void cns3xxx_pwr_clk_dis(unsigned int block)
+{
+	u32 reg = __raw_readl(PM_CLK_GATE_REG);
+
+	reg &= ~(block & PM_CLK_GATE_REG_MASK);
+	__raw_writel(reg, PM_CLK_GATE_REG);
+}
+EXPORT_SYMBOL(cns3xxx_pwr_clk_dis);
 
 void cns3xxx_pwr_power_up(unsigned int block)
 {
@@ -29,6 +43,7 @@ void cns3xxx_pwr_power_up(unsigned int block)
 	/* Wait for 300us for the PLL output clock locked. */
 	udelay(300);
 };
+EXPORT_SYMBOL(cns3xxx_pwr_power_up);
 
 void cns3xxx_pwr_power_down(unsigned int block)
 {
@@ -38,6 +53,7 @@ void cns3xxx_pwr_power_down(unsigned int block)
 	reg |= (block & CNS3XXX_PWR_PLL_ALL);
 	__raw_writel(reg, PM_PLL_HM_PD_CTRL_REG);
 };
+EXPORT_SYMBOL(cns3xxx_pwr_power_down);
 
 static void cns3xxx_pwr_soft_rst_force(unsigned int block)
 {
@@ -51,11 +67,13 @@ static void cns3xxx_pwr_soft_rst_force(unsigned int block)
 		reg &= ~(block & PM_SOFT_RST_REG_MASK);
 	} else {
 		reg &= ~(block & PM_SOFT_RST_REG_MASK);
+		__raw_writel(reg, PM_SOFT_RST_REG);
 		reg |= (block & PM_SOFT_RST_REG_MASK);
 	}
 
 	__raw_writel(reg, PM_SOFT_RST_REG);
 }
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst_force);
 
 void cns3xxx_pwr_soft_rst(unsigned int block)
 {
@@ -69,6 +87,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block)
 	}
 	cns3xxx_pwr_soft_rst_force(block);
 }
+EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
 
 void arch_reset(char mode, const char *cmd)
 {
@@ -99,3 +118,7 @@ int cns3xxx_cpu_clock(void)
 
 	return cpu;
 }
+EXPORT_SYMBOL(cns3xxx_cpu_clock);
+
+atomic_t usb_pwr_ref = ATOMIC_INIT(0);
+EXPORT_SYMBOL(usb_pwr_ref);
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index b77b860b36d..32f147998cd 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -61,6 +61,8 @@ config MACH_DAVINCI_EVM
 	bool "TI DM644x EVM"
 	default ARCH_DAVINCI_DM644x
 	depends on ARCH_DAVINCI_DM644x
+	select MISC_DEVICES
+	select EEPROM_AT24
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
@@ -68,6 +70,8 @@ config MACH_DAVINCI_EVM
 config MACH_SFFSDR
 	bool "Lyrtech SFFSDR"
 	depends on ARCH_DAVINCI_DM644x
+	select MISC_DEVICES
+	select EEPROM_AT24
 	help
 	  Say Y here to select the Lyrtech Small Form Factor
 	  Software Defined Radio (SFFSDR) board.
@@ -99,6 +103,8 @@ config MACH_DAVINCI_DM6467_EVM
 	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
 	select MACH_DAVINCI_DM6467TEVM
+	select MISC_DEVICES
+	select EEPROM_AT24
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
@@ -110,6 +116,8 @@ config MACH_DAVINCI_DM365_EVM
 	bool "TI DM365 EVM"
 	default ARCH_DAVINCI_DM365
 	depends on ARCH_DAVINCI_DM365
+	select MISC_DEVICES
+	select EEPROM_AT24
 	help
 	  Configure this option to specify whether the board used
 	  for development is a DM365 EVM
@@ -119,6 +127,8 @@ config MACH_DAVINCI_DA830_EVM
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
 	select GPIO_PCF857X
+	select MISC_DEVICES
+	select EEPROM_AT24
 	help
 	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 
@@ -148,7 +158,6 @@ config MACH_DAVINCI_DA850_EVM
 	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
 	default ARCH_DAVINCI_DA850
 	depends on ARCH_DAVINCI_DA850
-	select GPIO_PCA953X
 	help
 	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
 
@@ -178,6 +187,12 @@ config DA850_UI_RMII
 
 endchoice
 
+config GPIO_PCA953X
+	default MACH_DAVINCI_DA850_EVM
+
+config KEYBOARD_GPIO_POLLED
+	default MACH_DAVINCI_DA850_EVM
+
 config MACH_TNETV107X
 	bool "TI TNETV107X Reference Platform"
 	default ARCH_DAVINCI_TNETV107X
@@ -188,6 +203,8 @@ config MACH_TNETV107X
 config MACH_MITYOMAPL138
 	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
 	depends on ARCH_DAVINCI_DA850
+	select MISC_DEVICES
+	select EEPROM_AT24
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at
diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c
index 9c3f500fc12..1ce70a91f2e 100644
--- a/arch/arm/mach-davinci/aemif.c
+++ b/arch/arm/mach-davinci/aemif.c
@@ -90,7 +90,7 @@ int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
 					void __iomem *base, unsigned cs)
 {
 	unsigned set, val;
-	unsigned ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
+	int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
 	unsigned offset = A1CR_OFFSET + cs * 4;
 	struct clk *aemif_clk;
 	unsigned long clkrate;
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index c6e11c682e4..b01fb2ab944 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -17,8 +17,10 @@
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/input.h>
 #include <linux/mfd/tps6507x.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -266,34 +268,115 @@ static inline void da850_evm_setup_emac_rmii(int rmii_sel)
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
 	soc_info->emac_pdata->rmii_en = 1;
-	gpio_set_value(rmii_sel, 0);
+	gpio_set_value_cansleep(rmii_sel, 0);
 }
 #else
 static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
 #endif
 
+
+#define DA850_KEYS_DEBOUNCE_MS	10
+/*
+ * At 200ms polling interval it is possible to miss an
+ * event by tapping very lightly on the push button but most
+ * pushes do result in an event; longer intervals require the
+ * user to hold the button whereas shorter intervals require
+ * more CPU time for polling.
+ */
+#define DA850_GPIO_KEYS_POLL_MS	200
+
+enum da850_evm_ui_exp_pins {
+	DA850_EVM_UI_EXP_SEL_C = 5,
+	DA850_EVM_UI_EXP_SEL_B,
+	DA850_EVM_UI_EXP_SEL_A,
+	DA850_EVM_UI_EXP_PB8,
+	DA850_EVM_UI_EXP_PB7,
+	DA850_EVM_UI_EXP_PB6,
+	DA850_EVM_UI_EXP_PB5,
+	DA850_EVM_UI_EXP_PB4,
+	DA850_EVM_UI_EXP_PB3,
+	DA850_EVM_UI_EXP_PB2,
+	DA850_EVM_UI_EXP_PB1,
+};
+
+static const char const *da850_evm_ui_exp[] = {
+	[DA850_EVM_UI_EXP_SEL_C]        = "sel_c",
+	[DA850_EVM_UI_EXP_SEL_B]        = "sel_b",
+	[DA850_EVM_UI_EXP_SEL_A]        = "sel_a",
+	[DA850_EVM_UI_EXP_PB8]          = "pb8",
+	[DA850_EVM_UI_EXP_PB7]          = "pb7",
+	[DA850_EVM_UI_EXP_PB6]          = "pb6",
+	[DA850_EVM_UI_EXP_PB5]          = "pb5",
+	[DA850_EVM_UI_EXP_PB4]          = "pb4",
+	[DA850_EVM_UI_EXP_PB3]          = "pb3",
+	[DA850_EVM_UI_EXP_PB2]          = "pb2",
+	[DA850_EVM_UI_EXP_PB1]          = "pb1",
+};
+
+#define DA850_N_UI_PB		8
+
+static struct gpio_keys_button da850_evm_ui_keys[] = {
+	[0 ... DA850_N_UI_PB - 1] = {
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
+		.code			= -1, /* assigned at runtime */
+		.gpio			= -1, /* assigned at runtime */
+		.desc			= NULL, /* assigned at runtime */
+	},
+};
+
+static struct gpio_keys_platform_data da850_evm_ui_keys_pdata = {
+	.buttons = da850_evm_ui_keys,
+	.nbuttons = ARRAY_SIZE(da850_evm_ui_keys),
+	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
+};
+
+static struct platform_device da850_evm_ui_keys_device = {
+	.name = "gpio-keys-polled",
+	.id = 0,
+	.dev = {
+		.platform_data = &da850_evm_ui_keys_pdata
+	},
+};
+
+static void da850_evm_ui_keys_init(unsigned gpio)
+{
+	int i;
+	struct gpio_keys_button *button;
+
+	for (i = 0; i < DA850_N_UI_PB; i++) {
+		button = &da850_evm_ui_keys[i];
+		button->code = KEY_F8 - i;
+		button->desc = (char *)
+				da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
+		button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
+	}
+}
+
 static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
 						unsigned ngpio, void *c)
 {
 	int sel_a, sel_b, sel_c, ret;
 
-	sel_a = gpio + 7;
-	sel_b = gpio + 6;
-	sel_c = gpio + 5;
+	sel_a = gpio + DA850_EVM_UI_EXP_SEL_A;
+	sel_b = gpio + DA850_EVM_UI_EXP_SEL_B;
+	sel_c = gpio + DA850_EVM_UI_EXP_SEL_C;
 
-	ret = gpio_request(sel_a, "sel_a");
+	ret = gpio_request(sel_a, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_A]);
 	if (ret) {
 		pr_warning("Cannot open UI expander pin %d\n", sel_a);
 		goto exp_setup_sela_fail;
 	}
 
-	ret = gpio_request(sel_b, "sel_b");
+	ret = gpio_request(sel_b, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_B]);
 	if (ret) {
 		pr_warning("Cannot open UI expander pin %d\n", sel_b);
 		goto exp_setup_selb_fail;
 	}
 
-	ret = gpio_request(sel_c, "sel_c");
+	ret = gpio_request(sel_c, da850_evm_ui_exp[DA850_EVM_UI_EXP_SEL_C]);
 	if (ret) {
 		pr_warning("Cannot open UI expander pin %d\n", sel_c);
 		goto exp_setup_selc_fail;
@@ -304,6 +387,13 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
 	gpio_direction_output(sel_b, 1);
 	gpio_direction_output(sel_c, 1);
 
+	da850_evm_ui_keys_init(gpio);
+	ret = platform_device_register(&da850_evm_ui_keys_device);
+	if (ret) {
+		pr_warning("Could not register UI GPIO expander push-buttons");
+		goto exp_setup_keys_fail;
+	}
+
 	ui_card_detected = 1;
 	pr_info("DA850/OMAP-L138 EVM UI card detected\n");
 
@@ -313,6 +403,8 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
 
 	return 0;
 
+exp_setup_keys_fail:
+	gpio_free(sel_c);
 exp_setup_selc_fail:
 	gpio_free(sel_b);
 exp_setup_selb_fail:
@@ -324,14 +416,192 @@ exp_setup_sela_fail:
 static int da850_evm_ui_expander_teardown(struct i2c_client *client,
 					unsigned gpio, unsigned ngpio, void *c)
 {
+	platform_device_unregister(&da850_evm_ui_keys_device);
+
 	/* deselect all functionalities */
-	gpio_set_value(gpio + 5, 1);
-	gpio_set_value(gpio + 6, 1);
-	gpio_set_value(gpio + 7, 1);
+	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_C, 1);
+	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_B, 1);
+	gpio_set_value_cansleep(gpio + DA850_EVM_UI_EXP_SEL_A, 1);
+
+	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_C);
+	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_B);
+	gpio_free(gpio + DA850_EVM_UI_EXP_SEL_A);
+
+	return 0;
+}
+
+/* assign the baseboard expander's GPIOs after the UI board's */
+#define DA850_UI_EXPANDER_N_GPIOS ARRAY_SIZE(da850_evm_ui_exp)
+#define DA850_BB_EXPANDER_GPIO_BASE (DAVINCI_N_GPIO + DA850_UI_EXPANDER_N_GPIOS)
+
+enum da850_evm_bb_exp_pins {
+	DA850_EVM_BB_EXP_DEEP_SLEEP_EN = 0,
+	DA850_EVM_BB_EXP_SW_RST,
+	DA850_EVM_BB_EXP_TP_23,
+	DA850_EVM_BB_EXP_TP_22,
+	DA850_EVM_BB_EXP_TP_21,
+	DA850_EVM_BB_EXP_USER_PB1,
+	DA850_EVM_BB_EXP_USER_LED2,
+	DA850_EVM_BB_EXP_USER_LED1,
+	DA850_EVM_BB_EXP_USER_SW1,
+	DA850_EVM_BB_EXP_USER_SW2,
+	DA850_EVM_BB_EXP_USER_SW3,
+	DA850_EVM_BB_EXP_USER_SW4,
+	DA850_EVM_BB_EXP_USER_SW5,
+	DA850_EVM_BB_EXP_USER_SW6,
+	DA850_EVM_BB_EXP_USER_SW7,
+	DA850_EVM_BB_EXP_USER_SW8
+};
+
+static const char const *da850_evm_bb_exp[] = {
+	[DA850_EVM_BB_EXP_DEEP_SLEEP_EN]	= "deep_sleep_en",
+	[DA850_EVM_BB_EXP_SW_RST]		= "sw_rst",
+	[DA850_EVM_BB_EXP_TP_23]		= "tp_23",
+	[DA850_EVM_BB_EXP_TP_22]		= "tp_22",
+	[DA850_EVM_BB_EXP_TP_21]		= "tp_21",
+	[DA850_EVM_BB_EXP_USER_PB1]		= "user_pb1",
+	[DA850_EVM_BB_EXP_USER_LED2]		= "user_led2",
+	[DA850_EVM_BB_EXP_USER_LED1]		= "user_led1",
+	[DA850_EVM_BB_EXP_USER_SW1]		= "user_sw1",
+	[DA850_EVM_BB_EXP_USER_SW2]		= "user_sw2",
+	[DA850_EVM_BB_EXP_USER_SW3]		= "user_sw3",
+	[DA850_EVM_BB_EXP_USER_SW4]		= "user_sw4",
+	[DA850_EVM_BB_EXP_USER_SW5]		= "user_sw5",
+	[DA850_EVM_BB_EXP_USER_SW6]		= "user_sw6",
+	[DA850_EVM_BB_EXP_USER_SW7]		= "user_sw7",
+	[DA850_EVM_BB_EXP_USER_SW8]		= "user_sw8",
+};
+
+#define DA850_N_BB_USER_SW	8
+
+static struct gpio_keys_button da850_evm_bb_keys[] = {
+	[0] = {
+		.type			= EV_KEY,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
+		.code			= KEY_PROG1,
+		.desc			= NULL, /* assigned at runtime */
+		.gpio			= -1, /* assigned at runtime */
+	},
+	[1 ... DA850_N_BB_USER_SW] = {
+		.type			= EV_SW,
+		.active_low		= 1,
+		.wakeup			= 0,
+		.debounce_interval	= DA850_KEYS_DEBOUNCE_MS,
+		.code			= -1, /* assigned at runtime */
+		.desc			= NULL, /* assigned at runtime */
+		.gpio			= -1, /* assigned at runtime */
+	},
+};
+
+static struct gpio_keys_platform_data da850_evm_bb_keys_pdata = {
+	.buttons = da850_evm_bb_keys,
+	.nbuttons = ARRAY_SIZE(da850_evm_bb_keys),
+	.poll_interval = DA850_GPIO_KEYS_POLL_MS,
+};
+
+static struct platform_device da850_evm_bb_keys_device = {
+	.name = "gpio-keys-polled",
+	.id = 1,
+	.dev = {
+		.platform_data = &da850_evm_bb_keys_pdata
+	},
+};
+
+static void da850_evm_bb_keys_init(unsigned gpio)
+{
+	int i;
+	struct gpio_keys_button *button;
+
+	button = &da850_evm_bb_keys[0];
+	button->desc = (char *)
+		da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
+	button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
+
+	for (i = 0; i < DA850_N_BB_USER_SW; i++) {
+		button = &da850_evm_bb_keys[i + 1];
+		button->code = SW_LID + i;
+		button->desc = (char *)
+				da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
+		button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
+	}
+}
 
-	gpio_free(gpio + 5);
-	gpio_free(gpio + 6);
-	gpio_free(gpio + 7);
+#define DA850_N_BB_USER_LED	2
+
+static struct gpio_led da850_evm_bb_leds[] = {
+	[0 ... DA850_N_BB_USER_LED - 1] = {
+		.active_low = 1,
+		.gpio = -1, /* assigned at runtime */
+		.name = NULL, /* assigned at runtime */
+	},
+};
+
+static struct gpio_led_platform_data da850_evm_bb_leds_pdata = {
+	.leds = da850_evm_bb_leds,
+	.num_leds = ARRAY_SIZE(da850_evm_bb_leds),
+};
+
+static struct platform_device da850_evm_bb_leds_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev = {
+		.platform_data = &da850_evm_bb_leds_pdata
+	}
+};
+
+static void da850_evm_bb_leds_init(unsigned gpio)
+{
+	int i;
+	struct gpio_led *led;
+
+	for (i = 0; i < DA850_N_BB_USER_LED; i++) {
+		led = &da850_evm_bb_leds[i];
+
+		led->gpio = gpio + DA850_EVM_BB_EXP_USER_LED2 + i;
+		led->name =
+			da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_LED2 + i];
+	}
+}
+
+static int da850_evm_bb_expander_setup(struct i2c_client *client,
+						unsigned gpio, unsigned ngpio,
+						void *c)
+{
+	int ret;
+
+	/*
+	 * Register the switches and pushbutton on the baseboard as a gpio-keys
+	 * device.
+	 */
+	da850_evm_bb_keys_init(gpio);
+	ret = platform_device_register(&da850_evm_bb_keys_device);
+	if (ret) {
+		pr_warning("Could not register baseboard GPIO expander keys");
+		goto io_exp_setup_sw_fail;
+	}
+
+	da850_evm_bb_leds_init(gpio);
+	ret = platform_device_register(&da850_evm_bb_leds_device);
+	if (ret) {
+		pr_warning("Could not register baseboard GPIO expander LEDS");
+		goto io_exp_setup_leds_fail;
+	}
+
+	return 0;
+
+io_exp_setup_leds_fail:
+	platform_device_unregister(&da850_evm_bb_keys_device);
+io_exp_setup_sw_fail:
+	return ret;
+}
+
+static int da850_evm_bb_expander_teardown(struct i2c_client *client,
+					unsigned gpio, unsigned ngpio, void *c)
+{
+	platform_device_unregister(&da850_evm_bb_leds_device);
+	platform_device_unregister(&da850_evm_bb_keys_device);
 
 	return 0;
 }
@@ -340,6 +610,14 @@ static struct pca953x_platform_data da850_evm_ui_expander_info = {
 	.gpio_base	= DAVINCI_N_GPIO,
 	.setup		= da850_evm_ui_expander_setup,
 	.teardown	= da850_evm_ui_expander_teardown,
+	.names		= da850_evm_ui_exp,
+};
+
+static struct pca953x_platform_data da850_evm_bb_expander_info = {
+	.gpio_base	= DA850_BB_EXPANDER_GPIO_BASE,
+	.setup		= da850_evm_bb_expander_setup,
+	.teardown	= da850_evm_bb_expander_teardown,
+	.names		= da850_evm_bb_exp,
 };
 
 static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
@@ -350,6 +628,10 @@ static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
 		I2C_BOARD_INFO("tca6416", 0x20),
 		.platform_data = &da850_evm_ui_expander_info,
 	},
+	{
+		I2C_BOARD_INFO("tca6416", 0x21),
+		.platform_data = &da850_evm_bb_expander_info,
+	},
 };
 
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
@@ -540,7 +822,7 @@ static struct regulator_init_data tps65070_regulator_data[] = {
 	{
 		.constraints = {
 			.min_uV = 950000,
-			.max_uV = 1320000,
+			.max_uV = 1350000,
 			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
 				REGULATOR_CHANGE_STATUS),
 			.boot_on = 1,
@@ -591,7 +873,7 @@ static struct tps6507x_board tps_board = {
 	.tps6507x_ts_init_data = &tps6507x_touchscreen_data,
 };
 
-static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
+static struct i2c_board_info __initdata da850_evm_tps65070_info[] = {
 	{
 		I2C_BOARD_INFO("tps6507x", 0x48),
 		.platform_data = &tps_board,
@@ -600,8 +882,8 @@ static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
 
 static int __init pmic_tps65070_init(void)
 {
-	return i2c_register_board_info(1, da850evm_tps65070_info,
-					ARRAY_SIZE(da850evm_tps65070_info));
+	return i2c_register_board_info(1, da850_evm_tps65070_info,
+					ARRAY_SIZE(da850_evm_tps65070_info));
 }
 
 static const short da850_evm_lcdc_pins[] = {
@@ -736,6 +1018,27 @@ static struct edma_rsv_info *da850_edma_rsv[2] = {
 	&da850_edma_cc1_rsv,
 };
 
+#ifdef CONFIG_CPU_FREQ
+static __init int da850_evm_init_cpufreq(void)
+{
+	switch (system_rev & 0xF) {
+	case 3:
+		da850_max_speed = 456000;
+		break;
+	case 2:
+		da850_max_speed = 408000;
+		break;
+	case 1:
+		da850_max_speed = 372000;
+		break;
+	}
+
+	return da850_register_cpufreq("pll0_sysclk3");
+}
+#else
+static __init int da850_evm_init_cpufreq(void) { return 0; }
+#endif
+
 static __init void da850_evm_init(void)
 {
 	int ret;
@@ -836,7 +1139,7 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
 
-	ret = da850_register_cpufreq("pll0_sysclk3");
+	ret = da850_evm_init_cpufreq();
 	if (ret)
 		pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
 				ret);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 01ba080433d..e4e3af179f0 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -336,7 +336,7 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate)
 		ratio--;
 	}
 
-	if (ratio > PLLDIV_RATIO_MASK)
+	if (ratio > pll->div_ratio_mask)
 		return -EINVAL;
 
 	do {
@@ -344,7 +344,7 @@ int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate)
 	} while (v & PLLSTAT_GOSTAT);
 
 	v = __raw_readl(pll->base + clk->div_reg);
-	v &= ~PLLDIV_RATIO_MASK;
+	v &= ~pll->div_ratio_mask;
 	v |= ratio | PLLDIV_EN;
 	__raw_writel(v, pll->base + clk->div_reg);
 
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 11099980b58..0dd22031ec6 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -68,7 +68,7 @@
 #ifndef __ASSEMBLER__
 
 #include <linux/list.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #define PLLSTAT_GOSTAT	BIT(0)
 #define PLLCMD_GOSET	BIT(0)
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 63916b90276..78b5ae29ae4 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -830,8 +830,7 @@ static void da850_set_async3_src(int pllnum)
  * According to the TRM, minimum PLLM results in maximum power savings.
  * The OPP definitions below should keep the PLLM as low as possible.
  *
- * The output of the PLLM must be between 400 to 600 MHz.
- * This rules out prediv of anything but divide-by-one for 24Mhz OSC input.
+ * The output of the PLLM must be between 300 to 600 MHz.
  */
 struct da850_opp {
 	unsigned int	freq;	/* in KHz */
@@ -842,6 +841,33 @@ struct da850_opp {
 	unsigned int	cvdd_max; /* in uV */
 };
 
+static const struct da850_opp da850_opp_456 = {
+	.freq		= 456000,
+	.prediv		= 1,
+	.mult		= 19,
+	.postdiv	= 1,
+	.cvdd_min	= 1300000,
+	.cvdd_max	= 1350000,
+};
+
+static const struct da850_opp da850_opp_408 = {
+	.freq		= 408000,
+	.prediv		= 1,
+	.mult		= 17,
+	.postdiv	= 1,
+	.cvdd_min	= 1300000,
+	.cvdd_max	= 1350000,
+};
+
+static const struct da850_opp da850_opp_372 = {
+	.freq		= 372000,
+	.prediv		= 2,
+	.mult		= 31,
+	.postdiv	= 1,
+	.cvdd_min	= 1200000,
+	.cvdd_max	= 1320000,
+};
+
 static const struct da850_opp da850_opp_300 = {
 	.freq		= 300000,
 	.prediv		= 1,
@@ -876,6 +902,9 @@ static const struct da850_opp da850_opp_96 = {
 	}
 
 static struct cpufreq_frequency_table da850_freq_table[] = {
+	OPP(456),
+	OPP(408),
+	OPP(372),
 	OPP(300),
 	OPP(200),
 	OPP(96),
@@ -886,6 +915,19 @@ static struct cpufreq_frequency_table da850_freq_table[] = {
 };
 
 #ifdef CONFIG_REGULATOR
+static int da850_set_voltage(unsigned int index);
+static int da850_regulator_init(void);
+#endif
+
+static struct davinci_cpufreq_config cpufreq_info = {
+	.freq_table = da850_freq_table,
+#ifdef CONFIG_REGULATOR
+	.init = da850_regulator_init,
+	.set_voltage = da850_set_voltage,
+#endif
+};
+
+#ifdef CONFIG_REGULATOR
 static struct regulator *cvdd;
 
 static int da850_set_voltage(unsigned int index)
@@ -895,7 +937,7 @@ static int da850_set_voltage(unsigned int index)
 	if (!cvdd)
 		return -ENODEV;
 
-	opp = (struct da850_opp *) da850_freq_table[index].index;
+	opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
 
 	return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
 }
@@ -912,14 +954,6 @@ static int da850_regulator_init(void)
 }
 #endif
 
-static struct davinci_cpufreq_config cpufreq_info = {
-	.freq_table = &da850_freq_table[0],
-#ifdef CONFIG_REGULATOR
-	.init = da850_regulator_init,
-	.set_voltage = da850_set_voltage,
-#endif
-};
-
 static struct platform_device da850_cpufreq_device = {
 	.name			= "cpufreq-davinci",
 	.dev = {
@@ -928,12 +962,22 @@ static struct platform_device da850_cpufreq_device = {
 	.id = -1,
 };
 
+unsigned int da850_max_speed = 300000;
+
 int __init da850_register_cpufreq(char *async_clk)
 {
+	int i;
+
 	/* cpufreq driver can help keep an "async" clock constant */
 	if (async_clk)
 		clk_add_alias("async", da850_cpufreq_device.name,
 							async_clk, NULL);
+	for (i = 0; i < ARRAY_SIZE(da850_freq_table); i++) {
+		if (da850_freq_table[i].frequency <= da850_max_speed) {
+			cpufreq_info.freq_table = &da850_freq_table[i];
+			break;
+		}
+	}
 
 	return platform_device_register(&da850_cpufreq_device);
 }
@@ -942,17 +986,18 @@ static int da850_round_armrate(struct clk *clk, unsigned long rate)
 {
 	int i, ret = 0, diff;
 	unsigned int best = (unsigned int) -1;
+	struct cpufreq_frequency_table *table = cpufreq_info.freq_table;
 
 	rate /= 1000; /* convert to kHz */
 
-	for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
-		diff = da850_freq_table[i].frequency - rate;
+	for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
+		diff = table[i].frequency - rate;
 		if (diff < 0)
 			diff = -diff;
 
 		if (diff < best) {
 			best = diff;
-			ret = da850_freq_table[i].frequency;
+			ret = table[i].frequency;
 		}
 	}
 
@@ -973,7 +1018,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned long index)
 	struct pll_data *pll = clk->pll_data;
 	int ret;
 
-	opp = (struct da850_opp *) da850_freq_table[index].index;
+	opp = (struct da850_opp *) cpufreq_info.freq_table[index].index;
 	prediv = opp->prediv;
 	mult = opp->mult;
 	postdiv = opp->postdiv;
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index c9a86d8130d..85503debda5 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -344,7 +344,20 @@ static struct platform_device tsc_device = {
 
 void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
 {
-	int i;
+	int i, error;
+	struct clk *tsc_clk;
+
+	/*
+	 * The reset defaults for tnetv107x tsc clock divider is set too high.
+	 * This forces the clock down to a range that allows the ADC to
+	 * complete sample conversion in time.
+	 */
+	tsc_clk = clk_get(NULL, "sys_tsc_clk");
+	if (tsc_clk) {
+		error = clk_set_rate(tsc_clk, 5000000);
+		WARN_ON(error < 0);
+		clk_put(tsc_clk);
+	}
 
 	platform_device_register(&edma_device);
 	platform_device_register(&tnetv107x_wdt_device);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 9be261beae7..a5f8a80c1f2 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -359,8 +359,8 @@ static struct clk_lookup dm355_clks[] = {
 	CLK(NULL, "uart1", &uart1_clk),
 	CLK(NULL, "uart2", &uart2_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
-	CLK("davinci-asp.0", NULL, &asp0_clk),
-	CLK("davinci-asp.1", NULL, &asp1_clk),
+	CLK("davinci-mcbsp.0", NULL, &asp0_clk),
+	CLK("davinci-mcbsp.1", NULL, &asp1_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
 	CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
 	CLK("spi_davinci.0", NULL, &spi0_clk),
@@ -412,12 +412,7 @@ static struct resource dm355_spi0_resources[] = {
 static struct davinci_spi_platform_data dm355_spi0_pdata = {
 	.version 	= SPI_VERSION_1,
 	.num_chipselect = 2,
-	.clk_internal	= 1,
-	.cs_hold	= 1,
-	.intr_level	= 0,
-	.poll_mode	= 1,	/* 0 -> interrupt mode 1-> polling mode */
-	.c2tdelay	= 0,
-	.t2cdelay	= 0,
+	.cshold_bug	= true,
 };
 static struct platform_device dm355_spi0_device = {
 	.name = "spi_davinci",
@@ -664,7 +659,7 @@ static struct resource dm355_asp1_resources[] = {
 };
 
 static struct platform_device dm355_asp1_device = {
-	.name		= "davinci-asp",
+	.name		= "davinci-mcbsp",
 	.id		= 1,
 	.num_resources	= ARRAY_SIZE(dm355_asp1_resources),
 	.resource	= dm355_asp1_resources,
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index a12065e8726..02d2cc380df 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -459,7 +459,7 @@ static struct clk_lookup dm365_clks[] = {
 	CLK(NULL, "usb", &usb_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("davinci_voicecodec", NULL, &voicecodec_clk),
-	CLK("davinci-asp.0", NULL, &asp0_clk),
+	CLK("davinci-mcbsp", NULL, &asp0_clk),
 	CLK(NULL, "rto", &rto_clk),
 	CLK(NULL, "mjcp", &mjcp_clk),
 	CLK(NULL, NULL, NULL),
@@ -625,12 +625,6 @@ static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
 static struct davinci_spi_platform_data dm365_spi0_pdata = {
 	.version 	= SPI_VERSION_1,
 	.num_chipselect = 2,
-	.clk_internal	= 1,
-	.cs_hold	= 1,
-	.intr_level	= 0,
-	.poll_mode	= 1,	/* 0 -> interrupt mode 1-> polling mode */
-	.c2tdelay	= 0,
-	.t2cdelay	= 0,
 };
 
 static struct resource dm365_spi0_resources[] = {
@@ -922,8 +916,8 @@ static struct resource dm365_asp_resources[] = {
 };
 
 static struct platform_device dm365_asp_device = {
-	.name		= "davinci-asp",
-	.id		= 0,
+	.name		= "davinci-mcbsp",
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
 	.resource	= dm365_asp_resources,
 };
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 0608dd776a1..9a2376b3137 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -302,7 +302,7 @@ static struct clk_lookup dm644x_clks[] = {
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("i2c_davinci.1", NULL, &i2c_clk),
 	CLK("palm_bk3710", NULL, &ide_clk),
-	CLK("davinci-asp", NULL, &asp_clk),
+	CLK("davinci-mcbsp", NULL, &asp_clk),
 	CLK("davinci_mmc.0", NULL, &mmcsd_clk),
 	CLK(NULL, "spi", &spi_clk),
 	CLK(NULL, "gpio", &gpio_clk),
@@ -580,7 +580,7 @@ static struct resource dm644x_asp_resources[] = {
 };
 
 static struct platform_device dm644x_asp_device = {
-	.name		= "davinci-asp",
+	.name		= "davinci-mcbsp",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm644x_asp_resources),
 	.resource	= dm644x_asp_resources,
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index 4247b3f53b3..e7f95206652 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -28,6 +28,13 @@ extern void __iomem *da8xx_syscfg0_base;
 extern void __iomem *da8xx_syscfg1_base;
 
 /*
+ * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade
+ * (than the regular 300Mhz variant), the board code should set this up
+ * with the supported speed before calling da850_register_cpufreq().
+ */
+extern unsigned int da850_max_speed;
+
+/*
  * The cp_intc interrupt controller for the da8xx isn't in the same
  * chunk of physical memory space as the other registers (like it is
  * on the davincis) so it needs to be mapped separately.  It will be
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index 62b0a90309a..d1b954955c1 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -22,8 +22,8 @@
 #define __mem_isa(a)		(a)
 
 #ifndef __ASSEMBLER__
-#define __arch_ioremap(p, s, t)	davinci_ioremap(p, s, t)
-#define __arch_iounmap(v)	davinci_iounmap(v)
+#define __arch_ioremap		davinci_ioremap
+#define __arch_iounmap		davinci_iounmap
 
 void __iomem *davinci_ioremap(unsigned long phys, size_t size,
 			      unsigned int type);
diff --git a/arch/arm/mach-davinci/include/mach/spi.h b/arch/arm/mach-davinci/include/mach/spi.h
index 910efbf099c..38f4da5ca13 100644
--- a/arch/arm/mach-davinci/include/mach/spi.h
+++ b/arch/arm/mach-davinci/include/mach/spi.h
@@ -19,26 +19,66 @@
 #ifndef __ARCH_ARM_DAVINCI_SPI_H
 #define __ARCH_ARM_DAVINCI_SPI_H
 
+#define SPI_INTERN_CS	0xFF
+
 enum {
 	SPI_VERSION_1, /* For DM355/DM365/DM6467 */
 	SPI_VERSION_2, /* For DA8xx */
 };
 
+/**
+ * davinci_spi_platform_data - Platform data for SPI master device on DaVinci
+ *
+ * @version:	version of the SPI IP. Different DaVinci devices have slightly
+ *		varying versions of the same IP.
+ * @num_chipselect: number of chipselects supported by this SPI master
+ * @intr_line:	interrupt line used to connect the SPI IP to the ARM interrupt
+ *		controller withn the SoC. Possible values are 0 and 1.
+ * @chip_sel:	list of GPIOs which can act as chip-selects for the SPI.
+ *		SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
+ *		to populate if all chip-selects are internal.
+ * @cshold_bug:	set this to true if the SPI controller on your chip requires
+ *		a write to CSHOLD bit in between transfers (like in DM355).
+ */
 struct davinci_spi_platform_data {
 	u8	version;
 	u8	num_chipselect;
+	u8	intr_line;
+	u8	*chip_sel;
+	bool	cshold_bug;
+};
+
+/**
+ * davinci_spi_config - Per-chip-select configuration for SPI slave devices
+ *
+ * @wdelay:	amount of delay between transmissions. Measured in number of
+ *		SPI module clocks.
+ * @odd_parity:	polarity of parity flag at the end of transmit data stream.
+ *		0 - odd parity, 1 - even parity.
+ * @parity_enable: enable transmission of parity at end of each transmit
+ *		data stream.
+ * @io_type:	type of IO transfer. Choose between polled, interrupt and DMA.
+ * @timer_disable: disable chip-select timers (setup and hold)
+ * @c2tdelay:	chip-select setup time. Measured in number of SPI module clocks.
+ * @t2cdelay:	chip-select hold time. Measured in number of SPI module clocks.
+ * @t2edelay:	transmit data finished to SPI ENAn pin inactive time. Measured
+ *		in number of SPI clocks.
+ * @c2edelay:	chip-select active to SPI ENAn signal active time. Measured in
+ *		number of SPI clocks.
+ */
+struct davinci_spi_config {
 	u8	wdelay;
 	u8	odd_parity;
 	u8	parity_enable;
-	u8	wait_enable;
+#define SPI_IO_TYPE_INTR	0
+#define SPI_IO_TYPE_POLL	1
+#define SPI_IO_TYPE_DMA		2
+	u8	io_type;
 	u8	timer_disable;
-	u8	clk_internal;
-	u8	cs_hold;
-	u8	intr_level;
-	u8	poll_mode;
-	u8	use_dma;
 	u8	c2tdelay;
 	u8	t2cdelay;
+	u8	t2edelay;
+	u8	c2edelay;
 };
 
 #endif	/* __ARCH_ARM_DAVINCI_SPI_H */
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1b15dbd0a77..a4158040070 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -83,21 +83,16 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		pdctl1 = __raw_readl(psc_base + PDCTL1);
 		pdctl1 |= 0x100;
 		__raw_writel(pdctl1, psc_base + PDCTL1);
-
-		do {
-			ptstat = __raw_readl(psc_base +
-					       PTSTAT);
-		} while (!(((ptstat >> domain) & 1) == 0));
 	} else {
 		ptcmd = 1 << domain;
 		__raw_writel(ptcmd, psc_base + PTCMD);
-
-		do {
-			ptstat = __raw_readl(psc_base + PTSTAT);
-		} while (!(((ptstat >> domain) & 1) == 0));
 	}
 
 	do {
+		ptstat = __raw_readl(psc_base + PTSTAT);
+	} while (!(((ptstat >> domain) & 1) == 0));
+
+	do {
 		mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
 	} while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
 
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 0f21c36e65d..e1969ce904d 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -272,15 +272,35 @@ static cycle_t read_cycles(struct clocksource *cs)
 	return (cycles_t)timer32_read(t);
 }
 
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t read_dummy(struct clocksource *cs)
+{
+	return 0;
+}
+
+
 static struct clocksource clocksource_davinci = {
 	.rating		= 300,
-	.read		= read_cycles,
+	.read		= read_dummy,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 24,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 /*
+ * Overwrite weak default sched_clock with something more precise
+ */
+unsigned long long notrace sched_clock(void)
+{
+	const cycle_t cyc = clocksource_davinci.read(&clocksource_davinci);
+
+	return clocksource_cyc2ns(cyc, clocksource_davinci.mult,
+				clocksource_davinci.shift);
+}
+
+/*
  * clockevent
  */
 static int davinci_set_next_event(unsigned long cycles,
@@ -377,11 +397,10 @@ static void __init davinci_timer_init(void)
 	davinci_clock_tick_rate = clk_get_rate(timer_clk);
 
 	/* setup clocksource */
+	clocksource_davinci.read = read_cycles;
 	clocksource_davinci.name = id_to_name[clocksource_id];
-	clocksource_davinci.mult =
-		clocksource_khz2mult(davinci_clock_tick_rate/1000,
-				     clocksource_davinci.shift);
-	if (clocksource_register(&clocksource_davinci))
+	if (clocksource_register_hz(&clocksource_davinci,
+				    davinci_clock_tick_rate))
 		printk(err, clocksource_davinci.name);
 
 	/* setup clockevent */
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index daeae06430b..6fcdecec8d8 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -131,12 +131,13 @@ define_pll_clk(tdm, 1, 0x0ff, 0x200);
 define_pll_clk(eth, 2, 0x0ff, 0x400);
 
 /* Level 2 - divided outputs from the PLLs */
-#define define_pll_div_clk(pll, cname, div)		\
-	static struct clk pll##_##cname##_clk = {	\
-		.name		= #pll "_" #cname "_clk",\
-		.parent		= &pll_##pll##_clk,	\
-		.flags		= CLK_PLL,		\
-		.div_reg	= PLLDIV##div,		\
+#define define_pll_div_clk(pll, cname, div)			\
+	static struct clk pll##_##cname##_clk = {		\
+		.name		= #pll "_" #cname "_clk",	\
+		.parent		= &pll_##pll##_clk,		\
+		.flags		= CLK_PLL,			\
+		.div_reg	= PLLDIV##div,			\
+		.set_rate	= davinci_set_sysclk_rate,	\
 	}
 
 define_pll_div_clk(sys, arm1176,	1);
@@ -192,6 +193,7 @@ lpsc_clk_enabled(system,	sys_half_clk,	SYSTEM);
 lpsc_clk_enabled(ddr2_vrst,	sys_ddr_clk,	DDR2_EMIF1_VRST);
 lpsc_clk_enabled(ddr2_vctl_rst,	sys_ddr_clk,	DDR2_EMIF2_VCTL_RST);
 lpsc_clk_enabled(wdt_arm,	sys_half_clk,	WDT_ARM);
+lpsc_clk_enabled(timer1,	sys_half_clk,	TIMER1);
 
 lpsc_clk(mbx_lite,	sys_arm1176_clk,	MBX_LITE);
 lpsc_clk(ethss,		eth_125mhz_clk,		ETHSS);
@@ -205,16 +207,15 @@ lpsc_clk(mdio,		sys_half_clk,		MDIO);
 lpsc_clk(sdio0,		sys_half_clk,		SDIO0);
 lpsc_clk(sdio1,		sys_half_clk,		SDIO1);
 lpsc_clk(timer0,	sys_half_clk,		TIMER0);
-lpsc_clk(timer1,	sys_half_clk,		TIMER1);
 lpsc_clk(wdt_dsp,	sys_half_clk,		WDT_DSP);
 lpsc_clk(ssp,		sys_half_clk,		SSP);
 lpsc_clk(tdm0,		tdm_0_clk,		TDM0);
 lpsc_clk(tdm1,		tdm_1_clk,		TDM1);
 lpsc_clk(vlynq,		sys_vlynq_ref_clk,	VLYNQ);
 lpsc_clk(mcdma,		sys_half_clk,		MCDMA);
-lpsc_clk(usb0,		sys_half_clk,		USB0);
-lpsc_clk(usb1,		sys_half_clk,		USB1);
 lpsc_clk(usbss,		sys_half_clk,		USBSS);
+lpsc_clk(usb0,		clk_usbss,		USB0);
+lpsc_clk(usb1,		clk_usbss,		USB1);
 lpsc_clk(ethss_rgmii,	eth_250mhz_clk,		ETHSS_RGMII);
 lpsc_clk(imcop,		sys_dsp_clk,		IMCOP);
 lpsc_clk(spare,		sys_half_clk,		SPARE);
@@ -281,7 +282,9 @@ static struct clk_lookup clks[] = {
 	CLK(NULL,		"clk_tdm0",		&clk_tdm0),
 	CLK(NULL,		"clk_vlynq",		&clk_vlynq),
 	CLK(NULL,		"clk_mcdma",		&clk_mcdma),
+	CLK(NULL,		"clk_usbss",		&clk_usbss),
 	CLK(NULL,		"clk_usb0",		&clk_usb0),
+	CLK(NULL,		"clk_usb1",		&clk_usb1),
 	CLK(NULL,		"clk_tdm1",		&clk_tdm1),
 	CLK(NULL,		"clk_debugss",		&clk_debugss),
 	CLK(NULL,		"clk_ethss_rgmii",	&clk_ethss_rgmii),
@@ -289,8 +292,6 @@ static struct clk_lookup clks[] = {
 	CLK(NULL,		"clk_imcop",		&clk_imcop),
 	CLK(NULL,		"clk_spare",		&clk_spare),
 	CLK("davinci_mmc.1",	NULL,			&clk_sdio1),
-	CLK(NULL,		"clk_usb1",		&clk_usb1),
-	CLK(NULL,		"clk_usbss",		&clk_usbss),
 	CLK(NULL,		"clk_ddr2_vrst",	&clk_ddr2_vrst),
 	CLK(NULL,		"clk_ddr2_vctl_rst",	&clk_ddr2_vctl_rst),
 	CLK(NULL,		NULL,			NULL),
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 31f0cbea0ca..23d2b6d9fa6 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -64,17 +64,19 @@ static struct resource usb_resources[] = {
 	{
 		.start          = IRQ_USBINT,
 		.flags          = IORESOURCE_IRQ,
+		.name		= "mc"
 	},
 	{
 		/* placeholder for the dedicated CPPI IRQ */
 		.flags          = IORESOURCE_IRQ,
+		.name		= "dma"
 	},
 };
 
 static u64 usb_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device usb_dev = {
-	.name           = "musb_hdrc",
+	.name           = "musb-davinci",
 	.id             = -1,
 	.dev = {
 		.platform_data		= &usb_data,
@@ -110,6 +112,7 @@ static struct resource da8xx_usb20_resources[] = {
 	{
 		.start		= IRQ_DA8XX_USB_INT,
 		.flags		= IORESOURCE_IRQ,
+		.name		= "mc",
 	},
 };
 
@@ -121,6 +124,7 @@ int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
 
 	usb_dev.resource = da8xx_usb20_resources;
 	usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
+	usb_dev.name = "musb-da8xx";
 
 	return platform_device_register(&usb_dev);
 }
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
index 3b9a32ace90..a4ed3900912 100644
--- a/arch/arm/mach-dove/Kconfig
+++ b/arch/arm/mach-dove/Kconfig
@@ -9,6 +9,12 @@ config MACH_DOVE_DB
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DB-MV88AP510 Development Board.
 
+ config MACH_CM_A510
+	bool "CompuLab CM-A510 Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  CompuLab CM-A510 Board.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
index 7ab3be53f64..fa0f0185606 100644
--- a/arch/arm/mach-dove/Makefile
+++ b/arch/arm/mach-dove/Makefile
@@ -1,3 +1,4 @@
-obj-y				+= common.o addr-map.o irq.o pcie.o
+obj-y				+= common.o addr-map.o irq.o pcie.o mpp.o
 
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
+obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
new file mode 100644
index 00000000000..96e0e94e5fa
--- /dev/null
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -0,0 +1,95 @@
+/*
+ * arch/arm/mach-dove/cm-a510.c
+ *
+ * Copyright (C) 2010 CompuLab, Ltd.
+ * Konstantin Sinyuk <kostyas@compulab.co.il>
+ *
+ * Based on Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/dove.h>
+
+#include "common.h"
+
+static struct mv643xx_eth_platform_data cm_a510_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data cm_a510_sata_data = {
+	.n_ports        = 1,
+};
+
+/*
+ * SPI Devices:
+ * SPI0: 1M Flash Winbond w25q32bv
+ */
+static const struct flash_platform_data cm_a510_spi_flash_data = {
+	.type		= "w25q32bv",
+};
+
+static struct spi_board_info __initdata cm_a510_spi_flash_info[] = {
+	{
+		.modalias       = "m25p80",
+		.platform_data  = &cm_a510_spi_flash_data,
+		.irq            = -1,
+		.max_speed_hz   = 20000000,
+		.bus_num        = 0,
+		.chip_select    = 0,
+	},
+};
+
+static int __init cm_a510_pci_init(void)
+{
+	if (machine_is_cm_a510())
+		dove_pcie_init(1, 1);
+
+	return 0;
+}
+
+subsys_initcall(cm_a510_pci_init);
+
+/* Board Init */
+static void __init cm_a510_init(void)
+{
+	/*
+	 * Basic Dove setup. Needs to be called early.
+	 */
+	dove_init();
+
+	dove_ge00_init(&cm_a510_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_sata_init(&cm_a510_sata_data);
+	dove_sdio0_init();
+	dove_sdio1_init();
+	dove_spi0_init();
+	dove_spi1_init();
+	dove_uart0_init();
+	dove_uart1_init();
+	dove_i2c_init();
+	spi_register_board_info(cm_a510_spi_flash_info,
+				ARRAY_SIZE(cm_a510_spi_flash_info));
+}
+
+MACHINE_START(CM_A510, "Compulab CM-A510 Board")
+	.boot_params	= 0x00000100,
+	.init_machine	= cm_a510_init,
+	.map_io		= dove_map_io,
+	.init_irq	= dove_init_irq,
+	.timer		= &dove_timer,
+MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
index f6a08397f04..27b414578f2 100644
--- a/arch/arm/mach-dove/include/mach/dove.h
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -131,14 +131,21 @@
 #define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
 #define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
 #define DOVE_GPIO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_GPIO2_VIRT_BASE    (DOVE_SB_REGS_VIRT_BASE | 0xe8400)
 #define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
 #define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
 #define  DOVE_NAND_GPIO_EN		(1 << 0)
 #define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_VIRT_BASE + 0x40)
-
+#define  DOVE_SPI_GPIO_SEL		(1 << 5)
+#define  DOVE_UART1_GPIO_SEL		(1 << 4)
+#define  DOVE_AU1_GPIO_SEL		(1 << 3)
+#define  DOVE_CAM_GPIO_SEL		(1 << 2)
+#define  DOVE_SD1_GPIO_SEL		(1 << 1)
+#define  DOVE_SD0_GPIO_SEL		(1 << 0)
 
 /* Power Management */
 #define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+#define DOVE_PMU_SIG_CTRL	(DOVE_PMU_VIRT_BASE + 0x802c)
 
 /* Real Time Clock */
 #define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
index 0ee70ff39e1..340bb7af529 100644
--- a/arch/arm/mach-dove/include/mach/gpio.h
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -14,12 +14,14 @@
 #include <plat/gpio.h>
 #include <asm-generic/gpio.h>		/* cansleep wrappers */
 
-#define GPIO_MAX	64
+#define GPIO_MAX	72
 
 #define GPIO_BASE_LO		(DOVE_GPIO_VIRT_BASE + 0x00)
 #define GPIO_BASE_HI		(DOVE_GPIO_VIRT_BASE + 0x20)
 
-#define GPIO_BASE(pin)		((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+#define GPIO_BASE(pin)		((pin < 32) ? GPIO_BASE_LO :		\
+				 ((pin < 64) ? GPIO_BASE_HI :		\
+				  DOVE_GPIO2_VIRT_BASE))
 
 #define GPIO_OUT(pin)		(GPIO_BASE(pin) + 0x00)
 #define GPIO_IO_CONF(pin)	(GPIO_BASE(pin) + 0x04)
diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c
new file mode 100644
index 00000000000..71db2bdf2f2
--- /dev/null
+++ b/arch/arm/mach-dove/mpp.c
@@ -0,0 +1,212 @@
+/*
+ * arch/arm/mach-dove/mpp.c
+ *
+ * MPP functions for Marvell Dove SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/dove.h>
+
+#include "mpp.h"
+
+#define MPP_NR_REGS 4
+#define MPP_CTRL(i)	((i) == 3 ?				\
+			 DOVE_MPP_CTRL4_VIRT_BASE :		\
+			 DOVE_MPP_VIRT_BASE + (i) * 4)
+#define PMU_SIG_REGS 2
+#define PMU_SIG_CTRL(i)	(DOVE_PMU_SIG_CTRL + (i) * 4)
+
+struct dove_mpp_grp {
+	int start;
+	int end;
+};
+
+static struct dove_mpp_grp dove_mpp_grp[] = {
+	[MPP_24_39] = {
+		.start	= 24,
+		.end	= 39,
+	},
+	[MPP_40_45] = {
+		.start	= 40,
+		.end	= 45,
+	},
+	[MPP_46_51] = {
+		.start	= 40,
+		.end	= 45,
+	},
+	[MPP_58_61] = {
+		.start	= 58,
+		.end	= 61,
+	},
+	[MPP_62_63] = {
+		.start	= 62,
+		.end	= 63,
+	},
+};
+
+static void dove_mpp_gpio_mode(int start, int end, int gpio_mode)
+{
+	int i;
+
+	for (i = start; i <= end; i++)
+		orion_gpio_set_valid(i, gpio_mode);
+}
+
+static void dove_mpp_dump_regs(void)
+{
+#ifdef DEBUG
+	int i;
+
+	pr_debug("MPP_CTRL regs:");
+	for (i = 0; i < MPP_NR_REGS; i++)
+		printk(" %08x", readl(MPP_CTRL(i)));
+	printk("\n");
+
+	pr_debug("PMU_SIG_CTRL regs:");
+	for (i = 0; i < PMU_SIG_REGS; i++)
+		printk(" %08x", readl(PMU_SIG_CTRL(i)));
+	printk("\n");
+
+	pr_debug("PMU_MPP_GENERAL_CTRL: %08x\n", readl(DOVE_PMU_MPP_GENERAL_CTRL));
+	pr_debug("MPP_GENERAL: %08x\n", readl(DOVE_MPP_GENERAL_VIRT_BASE));
+#endif
+}
+
+static void dove_mpp_cfg_nfc(int sel)
+{
+	u32 mpp_gen_cfg = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+
+	mpp_gen_cfg &= ~0x1;
+	mpp_gen_cfg |= sel;
+	writel(mpp_gen_cfg, DOVE_MPP_GENERAL_VIRT_BASE);
+
+	dove_mpp_gpio_mode(64, 71, GPIO_OUTPUT_OK);
+}
+
+static void dove_mpp_cfg_au1(int sel)
+{
+	u32 mpp_ctrl4		= readl(DOVE_MPP_CTRL4_VIRT_BASE);
+	u32 ssp_ctrl1 = readl(DOVE_SSP_CTRL_STATUS_1);
+	u32 mpp_gen_ctrl = readl(DOVE_MPP_GENERAL_VIRT_BASE);
+	u32 global_cfg_2 = readl(DOVE_GLOBAL_CONFIG_2);
+
+	mpp_ctrl4 &= ~(DOVE_AU1_GPIO_SEL);
+	ssp_ctrl1 &= ~(DOVE_SSP_ON_AU1);
+	mpp_gen_ctrl &= ~(DOVE_AU1_SPDIFO_GPIO_EN);
+	global_cfg_2 &= ~(DOVE_TWSI_OPTION3_GPIO);
+
+	if (!sel || sel == 0x2)
+		dove_mpp_gpio_mode(52, 57, 0);
+	else
+		dove_mpp_gpio_mode(52, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK);
+
+	if (sel & 0x1) {
+		global_cfg_2 |= DOVE_TWSI_OPTION3_GPIO;
+		dove_mpp_gpio_mode(56, 57, 0);
+	}
+	if (sel & 0x2) {
+		mpp_gen_ctrl |= DOVE_AU1_SPDIFO_GPIO_EN;
+		dove_mpp_gpio_mode(57, 57, GPIO_OUTPUT_OK | GPIO_INPUT_OK);
+	}
+	if (sel & 0x4) {
+		ssp_ctrl1 |= DOVE_SSP_ON_AU1;
+		dove_mpp_gpio_mode(52, 55, 0);
+	}
+	if (sel & 0x8)
+		mpp_ctrl4 |= DOVE_AU1_GPIO_SEL;
+
+	writel(mpp_ctrl4, DOVE_MPP_CTRL4_VIRT_BASE);
+	writel(ssp_ctrl1, DOVE_SSP_CTRL_STATUS_1);
+	writel(mpp_gen_ctrl, DOVE_MPP_GENERAL_VIRT_BASE);
+	writel(global_cfg_2, DOVE_GLOBAL_CONFIG_2);
+}
+
+static void dove_mpp_conf_grp(int num, int sel, u32 *mpp_ctrl)
+{
+	int start = dove_mpp_grp[num].start;
+	int end = dove_mpp_grp[num].end;
+	int gpio_mode = sel ? GPIO_OUTPUT_OK | GPIO_INPUT_OK : 0;
+
+	*mpp_ctrl &= ~(0x1 << num);
+	*mpp_ctrl |= sel << num;
+
+	dove_mpp_gpio_mode(start, end, gpio_mode);
+}
+
+void __init dove_mpp_conf(unsigned int *mpp_list)
+{
+	u32 mpp_ctrl[MPP_NR_REGS];
+	u32 pmu_mpp_ctrl = 0;
+	u32 pmu_sig_ctrl[PMU_SIG_REGS];
+	int i;
+
+	/* Initialize gpiolib. */
+	orion_gpio_init();
+
+	for (i = 0; i < MPP_NR_REGS; i++)
+		mpp_ctrl[i] = readl(MPP_CTRL(i));
+
+	for (i = 0; i < PMU_SIG_REGS; i++)
+		pmu_sig_ctrl[i] = readl(PMU_SIG_CTRL(i));
+
+	pmu_mpp_ctrl = readl(DOVE_PMU_MPP_GENERAL_CTRL);
+
+	dove_mpp_dump_regs();
+
+	for ( ; *mpp_list != MPP_END; mpp_list++) {
+		unsigned int num = MPP_NUM(*mpp_list);
+		unsigned int sel = MPP_SEL(*mpp_list);
+		int shift, gpio_mode;
+
+		if (num > MPP_MAX) {
+			pr_err("dove: invalid MPP number (%u)\n", num);
+			continue;
+		}
+
+		if (*mpp_list & MPP_NFC_MASK) {
+			dove_mpp_cfg_nfc(sel);
+			continue;
+		}
+
+		if (*mpp_list & MPP_AU1_MASK) {
+			dove_mpp_cfg_au1(sel);
+			continue;
+		}
+
+		if (*mpp_list & MPP_GRP_MASK) {
+			dove_mpp_conf_grp(num, sel, &mpp_ctrl[3]);
+			continue;
+		}
+
+		shift = (num & 7) << 2;
+		if (*mpp_list & MPP_PMU_MASK) {
+			pmu_mpp_ctrl |= (0x1 << num);
+			pmu_sig_ctrl[num / 8] &= ~(0xf << shift);
+			pmu_sig_ctrl[num / 8] |= 0xf << shift;
+			gpio_mode = 0;
+		} else {
+			mpp_ctrl[num / 8] &= ~(0xf << shift);
+			mpp_ctrl[num / 8] |= sel << shift;
+			gpio_mode = GPIO_OUTPUT_OK | GPIO_INPUT_OK;
+		}
+
+		orion_gpio_set_valid(num, gpio_mode);
+	}
+
+	for (i = 0; i < MPP_NR_REGS; i++)
+		writel(mpp_ctrl[i], MPP_CTRL(i));
+
+	for (i = 0; i < PMU_SIG_REGS; i++)
+		writel(pmu_sig_ctrl[i], PMU_SIG_CTRL(i));
+
+	writel(pmu_mpp_ctrl, DOVE_PMU_MPP_GENERAL_CTRL);
+
+	dove_mpp_dump_regs();
+}
diff --git a/arch/arm/mach-dove/mpp.h b/arch/arm/mach-dove/mpp.h
new file mode 100644
index 00000000000..2a43ce413b1
--- /dev/null
+++ b/arch/arm/mach-dove/mpp.h
@@ -0,0 +1,220 @@
+#ifndef __ARCH_DOVE_MPP_CODED_H
+#define __ARCH_DOVE_MPP_CODED_H
+
+#define MPP(_num, _mode, _pmu, _grp, _au1, _nfc) (	\
+/* MPP/group number */		((_num) & 0xff) |		\
+/* MPP select value */		(((_mode) & 0xf) << 8) |	\
+/* MPP PMU */			((!!(_pmu)) << 12) |		\
+/* group flag */		((!!(_grp)) << 13) |		\
+/* AU1 flag */			((!!(_au1)) << 14) |		\
+/* NFCE flag */			((!!(_nfc)) << 15))
+
+#define MPP_MAX	71
+
+#define MPP_NUM(x)    ((x) & 0xff)
+#define MPP_SEL(x)    (((x) >> 8) & 0xf)
+
+#define MPP_PMU_MASK		MPP(0, 0x0, 1, 0, 0, 0)
+#define MPP_GRP_MASK		MPP(0, 0x0, 0, 1, 0, 0)
+#define MPP_AU1_MASK		MPP(0, 0x0, 0, 0, 1, 0)
+#define MPP_NFC_MASK		MPP(0, 0x0, 0, 0, 0, 1)
+
+#define MPP_END			MPP(0xff, 0xf, 1, 1, 1, 1)
+
+#define MPP_PMU_DRIVE_0		0x1
+#define MPP_PMU_DRIVE_1		0x2
+#define MPP_PMU_SDI		0x3
+#define MPP_PMU_CPU_PWRDWN	0x4
+#define MPP_PMU_STBY_PWRDWN	0x5
+#define MPP_PMU_CORE_PWR_GOOD	0x8
+#define MPP_PMU_BAT_FAULT	0xa
+#define MPP_PMU_EXT0_WU		0xb
+#define MPP_PMU_EXT1_WU		0xc
+#define MPP_PMU_EXT2_WU		0xd
+#define MPP_PMU_BLINK		0xe
+#define MPP_PMU(_num, _mode)	MPP((_num), MPP_PMU_##_mode, 1, 0, 0, 0)
+
+#define MPP_PIN(_num, _mode)	MPP((_num), (_mode), 0, 0, 0, 0)
+#define MPP_GRP(_grp, _mode)	MPP((_grp), (_mode), 0, 1, 0, 0)
+#define MPP_GRP_AU1(_mode)	MPP(0, (_mode), 0, 0, 1, 0)
+#define MPP_GRP_NFC(_mode)	MPP(0, (_mode), 0, 0, 0, 1)
+
+#define MPP0_GPIO0		MPP_PIN(0, 0x0)
+#define MPP0_UA2_RTSn		MPP_PIN(0, 0x2)
+#define MPP0_SDIO0_CD		MPP_PIN(0, 0x3)
+#define MPP0_LCD0_PWM		MPP_PIN(0, 0xf)
+
+#define MPP1_GPIO1		MPP_PIN(1, 0x0)
+#define MPP1_UA2_CTSn		MPP_PIN(1, 0x2)
+#define MPP1_SDIO0_WP		MPP_PIN(1, 0x3)
+#define MPP1_LCD1_PWM		MPP_PIN(1, 0xf)
+
+#define MPP2_GPIO2		MPP_PIN(2, 0x0)
+#define MPP2_SATA_PRESENT	MPP_PIN(2, 0x1)
+#define MPP2_UA2_TXD		MPP_PIN(2, 0x2)
+#define MPP2_SDIO0_BUS_POWER	MPP_PIN(2, 0x3)
+#define MPP2_UA_RTSn1		MPP_PIN(2, 0x4)
+
+#define MPP3_GPIO3		MPP_PIN(3, 0x0)
+#define MPP3_SATA_ACT		MPP_PIN(3, 0x1)
+#define MPP3_UA2_RXD		MPP_PIN(3, 0x2)
+#define MPP3_SDIO0_LED_CTRL	MPP_PIN(3, 0x3)
+#define MPP3_UA_CTSn1		MPP_PIN(3, 0x4)
+#define MPP3_SPI_LCD_CS1	MPP_PIN(3, 0xf)
+
+#define MPP4_GPIO4		MPP_PIN(4, 0x0)
+#define MPP4_UA3_RTSn		MPP_PIN(4, 0x2)
+#define MPP4_SDIO1_CD		MPP_PIN(4, 0x3)
+#define MPP4_SPI_1_MISO		MPP_PIN(4, 0x4)
+
+#define MPP5_GPIO5		MPP_PIN(5, 0x0)
+#define MPP5_UA3_CTSn		MPP_PIN(5, 0x2)
+#define MPP5_SDIO1_WP		MPP_PIN(5, 0x3)
+#define MPP5_SPI_1_CS		MPP_PIN(5, 0x4)
+
+#define MPP6_GPIO6		MPP_PIN(6, 0x0)
+#define MPP6_UA3_TXD		MPP_PIN(6, 0x2)
+#define MPP6_SDIO1_BUS_POWER	MPP_PIN(6, 0x3)
+#define MPP6_SPI_1_MOSI		MPP_PIN(6, 0x4)
+
+#define MPP7_GPIO7		MPP_PIN(7, 0x0)
+#define MPP7_UA3_RXD		MPP_PIN(7, 0x2)
+#define MPP7_SDIO1_LED_CTRL	MPP_PIN(7, 0x3)
+#define MPP7_SPI_1_SCK		MPP_PIN(7, 0x4)
+
+#define MPP8_GPIO8		MPP_PIN(8, 0x0)
+#define MPP8_WD_RST_OUT		MPP_PIN(8, 0x1)
+
+#define MPP9_GPIO9		MPP_PIN(9, 0x0)
+#define MPP9_PEX1_CLKREQn	MPP_PIN(9, 0x5)
+
+#define MPP10_GPIO10		MPP_PIN(10, 0x0)
+#define MPP10_SSP_SCLK		MPP_PIN(10, 0x5)
+
+#define MPP11_GPIO11		MPP_PIN(11, 0x0)
+#define MPP11_SATA_PRESENT	MPP_PIN(11, 0x1)
+#define MPP11_SATA_ACT		MPP_PIN(11, 0x2)
+#define MPP11_SDIO0_LED_CTRL	MPP_PIN(11, 0x3)
+#define MPP11_SDIO1_LED_CTRL	MPP_PIN(11, 0x4)
+#define MPP11_PEX0_CLKREQn	MPP_PIN(11, 0x5)
+
+#define MPP12_GPIO12		MPP_PIN(12, 0x0)
+#define MPP12_SATA_ACT		MPP_PIN(12, 0x1)
+#define MPP12_UA2_RTSn		MPP_PIN(12, 0x2)
+#define MPP12_AD0_I2S_EXT_MCLK	MPP_PIN(12, 0x3)
+#define MPP12_SDIO1_CD		MPP_PIN(12, 0x4)
+
+#define MPP13_GPIO13		MPP_PIN(13, 0x0)
+#define MPP13_UA2_CTSn		MPP_PIN(13, 0x2)
+#define MPP13_AD1_I2S_EXT_MCLK	MPP_PIN(13, 0x3)
+#define MPP13_SDIO1WP		MPP_PIN(13, 0x4)
+#define MPP13_SSP_EXTCLK	MPP_PIN(13, 0x5)
+
+#define MPP14_GPIO14		MPP_PIN(14, 0x0)
+#define MPP14_UA2_TXD		MPP_PIN(14, 0x2)
+#define MPP14_SDIO1_BUS_POWER	MPP_PIN(14, 0x4)
+#define MPP14_SSP_RXD		MPP_PIN(14, 0x5)
+
+#define MPP15_GPIO15		MPP_PIN(15, 0x0)
+#define MPP15_UA2_RXD		MPP_PIN(15, 0x2)
+#define MPP15_SDIO1_LED_CTRL	MPP_PIN(15, 0x4)
+#define MPP15_SSP_SFRM		MPP_PIN(15, 0x5)
+
+#define MPP16_GPIO16		MPP_PIN(16, 0x0)
+#define MPP16_UA3_RTSn		MPP_PIN(16, 0x2)
+#define MPP16_SDIO0_CD		MPP_PIN(16, 0x3)
+#define MPP16_SPI_LCD_CS1	MPP_PIN(16, 0x4)
+#define MPP16_AC97_SDATA_IN1	MPP_PIN(16, 0x5)
+
+#define MPP17_GPIO17		MPP_PIN(17, 0x0)
+#define MPP17_AC97_SYSCLK_OUT	MPP_PIN(17, 0x1)
+#define MPP17_UA3_CTSn		MPP_PIN(17, 0x2)
+#define MPP17_SDIO0_WP		MPP_PIN(17, 0x3)
+#define MPP17_TW_SDA2		MPP_PIN(17, 0x4)
+#define MPP17_AC97_SDATA_IN2	MPP_PIN(17, 0x5)
+
+#define MPP18_GPIO18		MPP_PIN(18, 0x0)
+#define MPP18_UA3_TXD		MPP_PIN(18, 0x2)
+#define MPP18_SDIO0_BUS_POWER	MPP_PIN(18, 0x3)
+#define MPP18_LCD0_PWM		MPP_PIN(18, 0x4)
+#define MPP18_AC_SDATA_IN3	MPP_PIN(18, 0x5)
+
+#define MPP19_GPIO19		MPP_PIN(19, 0x0)
+#define MPP19_UA3_RXD		MPP_PIN(19, 0x2)
+#define MPP19_SDIO0_LED_CTRL	MPP_PIN(19, 0x3)
+#define MPP19_TW_SCK2		MPP_PIN(19, 0x4)
+
+#define MPP20_GPIO20		MPP_PIN(20, 0x0)
+#define MPP20_AC97_SYSCLK_OUT	MPP_PIN(20, 0x1)
+#define MPP20_SPI_LCD_MISO	MPP_PIN(20, 0x2)
+#define MPP20_SDIO1_CD		MPP_PIN(20, 0x3)
+#define MPP20_SDIO0_CD		MPP_PIN(20, 0x5)
+#define MPP20_SPI_1_MISO	MPP_PIN(20, 0x6)
+
+#define MPP21_GPIO21		MPP_PIN(21, 0x0)
+#define MPP21_UA1_RTSn		MPP_PIN(21, 0x1)
+#define MPP21_SPI_LCD_CS0	MPP_PIN(21, 0x2)
+#define MPP21_SDIO1_WP		MPP_PIN(21, 0x3)
+#define MPP21_SSP_SFRM		MPP_PIN(21, 0x4)
+#define MPP21_SDIO0_WP		MPP_PIN(21, 0x5)
+#define MPP21_SPI_1_CS		MPP_PIN(21, 0x6)
+
+#define MPP22_GPIO22		MPP_PIN(22, 0x0)
+#define MPP22_UA1_CTSn		MPP_PIN(22, 0x1)
+#define MPP22_SPI_LCD_MOSI	MPP_PIN(22, 0x2)
+#define MPP22_SDIO1_BUS_POWER	MPP_PIN(22, 0x3)
+#define MPP22_SSP_TXD		MPP_PIN(22, 0x4)
+#define MPP22_SDIO0_BUS_POWER	MPP_PIN(22, 0x5)
+#define MPP22_SPI_1_MOSI	MPP_PIN(22, 0x6)
+
+#define MPP23_GPIO23		MPP_PIN(23, 0x0)
+#define MPP23_SPI_LCD_SCK	MPP_PIN(23, 0x2)
+#define MPP23_SDIO1_LED_CTRL	MPP_PIN(23, 0x3)
+#define MPP23_SSP_SCLK		MPP_PIN(23, 0x4)
+#define MPP23_SDIO0_LED_CTRL	MPP_PIN(23, 0x5)
+#define MPP23_SPI_1_SCK		MPP_PIN(23, 0x6)
+
+/* for MPP groups _num is a group index */
+enum dove_mpp_grp_idx {
+	MPP_24_39 = 2,
+	MPP_40_45 = 0,
+	MPP_46_51 = 1,
+	MPP_58_61 = 5,
+	MPP_62_63 = 4,
+};
+
+#define MPP24_39_GPIO		MPP_GRP(MPP_24_39, 0x1)
+#define MPP24_39_CAM		MPP_GRP(MPP_24_39, 0x0)
+
+#define MPP40_45_GPIO		MPP_GRP(MPP_40_45, 0x1)
+#define MPP40_45_SD0		MPP_GRP(MPP_40_45, 0x0)
+
+#define MPP46_51_GPIO		MPP_GRP(MPP_46_51, 0x1)
+#define MPP46_51_SD1		MPP_GRP(MPP_46_51, 0x0)
+
+#define MPP58_61_GPIO		MPP_GRP(MPP_58_61, 0x1)
+#define MPP58_61_SPI		MPP_GRP(MPP_58_61, 0x0)
+
+#define MPP62_63_GPIO		MPP_GRP(MPP_62_63, 0x1)
+#define MPP62_63_UA1		MPP_GRP(MPP_62_63, 0x0)
+
+/* The MPP[64:71] control differs from other groups */
+#define MPP64_71_GPO		MPP_GRP_NFC(0x1)
+#define MPP64_71_NFC		MPP_GRP_NFC(0x0)
+
+/*
+ * The MPP[52:57] functionality is encoded by 4 bits in different
+ * registers. The _num field in this case encodes those bits in
+ * correspodence with Table 135 of 88AP510 Functional specification
+ */
+#define MPP52_57_AU1		MPP_GRP_AU1(0x0)
+#define MPP52_57_AU1_GPIO57	MPP_GRP_AU1(0x2)
+#define MPP52_57_GPIO		MPP_GRP_AU1(0xa)
+#define MPP52_57_TW_GPIO	MPP_GRP_AU1(0xb)
+#define MPP52_57_AU1_SSP	MPP_GRP_AU1(0xc)
+#define MPP52_57_SSP_GPIO	MPP_GRP_AU1(0xe)
+#define MPP52_57_SSP_TW		MPP_GRP_AU1(0xf)
+
+void dove_mpp_conf(unsigned int *mpp_list);
+
+#endif	/* __ARCH_DOVE_MPP_CODED_H */
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
index 60bde56fba4..ea141b7a3e0 100644
--- a/arch/arm/mach-ebsa110/include/mach/vmalloc.h
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       0xdf000000
+#define VMALLOC_END       0xdf000000UL
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index ef06c66a6f1..ca4de710509 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -19,10 +19,10 @@
 #include <linux/string.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
 
-#include <asm/clkdev.h>
 #include <asm/div64.h>
 
 
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index 3a5961d3f3b..5e31b2b25da 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -1,5 +1,13 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/dma.h
+/**
+ * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine
+ *
+ * The EP93xx DMA M2P subsystem handles DMA transfers between memory and
+ * peripherals. DMA M2P channels are available for audio, UARTs and IrDA.
+ * See chapter 10 of the EP93xx users guide for full details on the DMA M2P
+ * engine.
+ *
+ * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code.
+ *
  */
 
 #ifndef __ASM_ARCH_DMA_H
@@ -8,12 +16,34 @@
 #include <linux/list.h>
 #include <linux/types.h>
 
+/**
+ * struct ep93xx_dma_buffer - Information about a buffer to be transferred
+ * using the DMA M2P engine
+ *
+ * @list: Entry in DMA buffer list
+ * @bus_addr: Physical address of the buffer
+ * @size: Size of the buffer in bytes
+ */
 struct ep93xx_dma_buffer {
 	struct list_head	list;
 	u32			bus_addr;
 	u16			size;
 };
 
+/**
+ * struct ep93xx_dma_m2p_client - Information about a DMA M2P client
+ *
+ * @name: Unique name for this client
+ * @flags: Client flags
+ * @cookie: User data to pass to callback functions
+ * @buffer_started: Non NULL function to call when a transfer is started.
+ * 			The arguments are the user data cookie and the DMA
+ *			buffer which is starting.
+ * @buffer_finished: Non NULL function to call when a transfer is completed.
+ *			The arguments are the user data cookie, the DMA buffer
+ *			which has completed, and a boolean flag indicating if
+ *			the transfer had an error.
+ */
 struct ep93xx_dma_m2p_client {
 	char			*name;
 	u8			flags;
@@ -24,10 +54,11 @@ struct ep93xx_dma_m2p_client {
 					struct ep93xx_dma_buffer *buf,
 					int bytes, int error);
 
-	/* Internal to the DMA code.  */
+	/* private: Internal use only */
 	void			*channel;
 };
 
+/* DMA M2P ports */
 #define EP93XX_DMA_M2P_PORT_I2S1	0x00
 #define EP93XX_DMA_M2P_PORT_I2S2	0x01
 #define EP93XX_DMA_M2P_PORT_AAC1	0x02
@@ -39,18 +70,80 @@ struct ep93xx_dma_m2p_client {
 #define EP93XX_DMA_M2P_PORT_UART3	0x08
 #define EP93XX_DMA_M2P_PORT_IRDA	0x09
 #define EP93XX_DMA_M2P_PORT_MASK	0x0f
-#define EP93XX_DMA_M2P_TX		0x00
-#define EP93XX_DMA_M2P_RX		0x10
-#define EP93XX_DMA_M2P_ABORT_ON_ERROR	0x20
-#define EP93XX_DMA_M2P_IGNORE_ERROR	0x40
-#define EP93XX_DMA_M2P_ERROR_MASK	0x60
 
-int  ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+/* DMA M2P client flags */
+#define EP93XX_DMA_M2P_TX		0x00	/* Memory to peripheral */
+#define EP93XX_DMA_M2P_RX		0x10	/* Peripheral to memory */
+
+/*
+ * DMA M2P client error handling flags. See the EP93xx users guide
+ * documentation on the DMA M2P CONTROL register for more details
+ */
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR	0x20	/* Abort on peripheral error */
+#define EP93XX_DMA_M2P_IGNORE_ERROR	0x40	/* Ignore peripheral errors */
+#define EP93XX_DMA_M2P_ERROR_MASK	0x60	/* Mask of error bits */
+
+/**
+ * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client information to register
+ * returns 0 on success
+ *
+ * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA
+ * client
+ */
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client to unregister
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ */
 void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * If the current or next transfer positions are free on the M2P client then
+ * the transfer is started immediately. If not, the transfer is added to the
+ * list of pending transfers. This function must not be called from the
+ * buffer_finished callback for an M2P channel.
+ *
+ */
 void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
 			   struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list
+ * for an M2P channel
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * This function must only be called from the buffer_finished callback for an
+ * M2P channel. It is commonly used to add the next transfer in a chained list
+ * of DMA transfers.
+ */
 void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
 				     struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client
+ *
+ * @m2p: DMA client to flush transfers on
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ *
+ */
 void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
 
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
index 0ffbb7c85e5..40ba78e5782 100644
--- a/arch/arm/mach-footbridge/include/mach/vmalloc.h
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  */
 
 
-#define VMALLOC_END       0xf0000000
+#define VMALLOC_END       0xf0000000UL
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
index a45915b8875..8520b4a4d4e 100644
--- a/arch/arm/mach-h720x/include/mach/vmalloc.h
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -5,6 +5,6 @@
 #ifndef __ARCH_ARM_VMALLOC_H
 #define __ARCH_ARM_VMALLOC_H
 
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
 
 #endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 197f9e241cf..17d2e608a21 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,13 +1,37 @@
 config IMX_HAVE_DMA_V1
 	bool
 
-if ARCH_MX1
-
 config SOC_IMX1
+	bool
 	select CPU_ARM920T
 	select IMX_HAVE_DMA_V1
 	select IMX_HAVE_IOMUX_V1
+	select MXC_AVIC
+
+config SOC_IMX21
+	bool
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	select MXC_AVIC
+
+config SOC_IMX25
 	bool
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_MXC_IOMUX_V3
+	select MXC_AVIC
+
+config SOC_IMX27
+	bool
+	select CPU_ARM926T
+	select ARCH_MXC_AUDMUX_V1
+	select IMX_HAVE_DMA_V1
+	select IMX_HAVE_IOMUX_V1
+	select MXC_AVIC
+
+if ARCH_MX1
 
 comment "MX1 platforms:"
 config MACH_MXLADS
@@ -31,33 +55,17 @@ endif
 
 if ARCH_MX2
 
-config SOC_IMX21
-	select CPU_ARM926T
-	select ARCH_MXC_AUDMUX_V1
-	select IMX_HAVE_DMA_V1
-	select IMX_HAVE_IOMUX_V1
-	bool
-
-config SOC_IMX27
-	select CPU_ARM926T
-	select ARCH_MXC_AUDMUX_V1
-	select IMX_HAVE_DMA_V1
-	select IMX_HAVE_IOMUX_V1
-	bool
-
 choice
 	prompt "CPUs:"
 	default MACH_MX21
 
 config MACH_MX21
 	bool "i.MX21 support"
-	select SOC_IMX21
 	help
 	  This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
 	bool "i.MX27 support"
-	select SOC_IMX27
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 
@@ -71,7 +79,10 @@ comment "MX21 platforms:"
 
 config MACH_MX21ADS
 	bool "MX21ADS platform"
+	select SOC_IMX21
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	help
 	  Include support for MX21ADS platform. This includes specific
@@ -79,24 +90,79 @@ config MACH_MX21ADS
 
 endif
 
+if ARCH_MX25
+
+comment "MX25 platforms:"
+
+config MACH_MX25_3DS
+	bool "Support MX25PDK (3DS) Platform"
+	select SOC_IMX25
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMXDI_RTC
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+
+config MACH_EUKREA_CPUIMX25
+	bool "Support Eukrea CPUIMX25 Platform"
+	select SOC_IMX25
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMXDI_RTC
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_ULPI if USB_ULPI
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX25
+	default MACH_EUKREA_MBIMXSD25_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD25_BASEBOARD
+	bool "Eukrea MBIMXSD development board"
+	select IMX_HAVE_PLATFORM_IMX_SSI
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+endif
+
 if MACH_MX27
 
 comment "MX27 platforms:"
 
 config MACH_MX27ADS
 	bool "MX27ADS platform"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
 	help
 	  Include support for MX27ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCM038
 	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
@@ -109,8 +175,9 @@ choice
 	default MACH_PCM970_BASEBOARD
 
 config MACH_PCM970_BASEBOARD
-	prompt "PHYTEC PCM970 development board"
-	bool
+	bool "PHYTEC PCM970 development board"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	help
 	  This adds board specific devices that can be found on Phytec's
 	  PCM970 evaluation board.
@@ -119,9 +186,14 @@ endchoice
 
 config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
@@ -130,6 +202,7 @@ config MACH_CPUIMX27
 config MACH_EUKREA_CPUIMX27_USESDHC2
 	bool "CPUIMX27 integrates SDHC2 module"
 	depends on MACH_CPUIMX27
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	help
 	  This adds support for the internal SDHC2 used on CPUIMX27
 	  for wifi or eMMC.
@@ -148,8 +221,11 @@ choice
 
 config MACH_EUKREA_MBIMX27_BASEBOARD
 	bool "Eukrea MBIMX27 development board"
+	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  This adds board specific devices that can be found on Eukrea's
@@ -159,15 +235,26 @@ endchoice
 
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
+	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	help
 	  Include support for Visstrim_m10 platform and its different variants.
 	  This includes specific configurations for the board and its
@@ -175,6 +262,7 @@ config MACH_IMX27_VISSTRIM_M10
 
 config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
+	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for MX27 LITEKIT platform. This includes specific
@@ -182,10 +270,17 @@ config MACH_IMX27LITE
 
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
@@ -194,8 +289,11 @@ config MACH_PCA100
 
 config MACH_MXT_TD60
 	bool "Maxtrack i-MXT TD60"
+	select SOC_IMX27
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	help
 	  Include support for i-MXT (aka td60) platform. This
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 5582692bb17..77100bf2615 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -4,13 +4,13 @@
 
 # Object file lists.
 
-obj-y	:=  devices.o
-
 obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
 
 obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
 obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
 
+obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o
+
 obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o
 
@@ -22,6 +22,10 @@ obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
 
 obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
 
+obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX25) += mach-eukrea_cpuimx25.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
+
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
 obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 7988a85cf07..3953d60bff0 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -6,6 +6,10 @@ zreladdr-$(CONFIG_MACH_MX21)	:= 0xC0008000
 params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
 initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
 
+zreladdr-$(CONFIG_ARCH_MX25)	:= 0x80008000
+params_phys-$(CONFIG_ARCH_MX25)	:= 0x80000100
+initrd_phys-$(CONFIG_ARCH_MX25)	:= 0x80800000
+
 zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
 params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
 initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
index daca30b2d5b..3938a563b28 100644
--- a/arch/arm/mach-imx/clock-imx1.c
+++ b/arch/arm/mach-imx/clock-imx1.c
@@ -22,8 +22,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c
index cf15ea516a7..bf30a8c7ce6 100644
--- a/arch/arm/mach-imx/clock-imx21.c
+++ b/arch/arm/mach-imx/clock-imx21.c
@@ -21,11 +21,11 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/clkdev.h>
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
-#include <asm/clkdev.h>
 #include <asm/div64.h>
 
 #define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
@@ -1185,7 +1185,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "brom", brom_clk)
 	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
 	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-imx/clock-imx25.c
index 9e4a5578c2f..daa0165b677 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-imx/clock-imx25.c
@@ -21,8 +21,7 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
@@ -296,7 +295,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 	_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdt_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk)
 	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
index 98a25bada78..583f2515c1d 100644
--- a/arch/arm/mach-imx/clock-imx27.c
+++ b/arch/arm/mach-imx/clock-imx27.c
@@ -21,8 +21,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
 #include <asm/div64.h>
 
 #include <mach/clock.h>
@@ -125,7 +125,7 @@ static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
 	if (clk->parent == parent)
 		return 0;
 
-	if (mx27_revision() >= CHIP_REV_2_0) {
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
 		if (parent == &mpll_main1_clk) {
 			cscr |= CCM_CSCR_ARM_SRC;
 		} else {
@@ -174,7 +174,7 @@ static int set_rate_cpu(struct clk *clk, unsigned long rate)
 	div--;
 
 	reg = __raw_readl(CCM_CSCR);
-	if (mx27_revision() >= CHIP_REV_2_0) {
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
 		reg &= ~(3 << 12);
 		reg |= div << 12;
 		reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
@@ -244,7 +244,7 @@ static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
 
 	parent_rate = clk_get_rate(clk->parent);
 
-	if (mx27_revision() >= CHIP_REV_2_0)
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
 		pdf += 4;  /* MX27 TO2+ */
 	else
 		pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
@@ -269,7 +269,7 @@ static unsigned long get_rate_nfc(struct clk *clk)
 
 	parent_rate = clk_get_rate(clk->parent);
 
-	if (mx27_revision() >= CHIP_REV_2_0)
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
 		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
 	else
 		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
@@ -284,7 +284,7 @@ static unsigned long get_rate_vpu(struct clk *clk)
 
 	parent_rate = clk_get_rate(clk->parent);
 
-	if (mx27_revision() >= CHIP_REV_2_0) {
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
 		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
 		vpu_pdf += 4;
 	} else {
@@ -347,7 +347,7 @@ static unsigned long get_rate_mpll_main(struct clk *clk)
 	 * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
 	 * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
 	 */
-	if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0 && clk->id == 1)
 		return 2UL * parent_rate / 3UL;
 
 	return parent_rate;
@@ -365,7 +365,7 @@ static unsigned long get_rate_spll(struct clk *clk)
 	/* On TO2 we have to write the value back. Otherwise we
 	 * read 0 from this register the next time.
 	 */
-	if (mx27_revision() >= CHIP_REV_2_0)
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
 		__raw_writel(reg, CCM_SPCTL0);
 
 	return mxc_decode_pll(reg, rate);
@@ -376,7 +376,7 @@ static unsigned long get_rate_cpu(struct clk *clk)
 	u32 div;
 	unsigned long rate;
 
-	if (mx27_revision() >= CHIP_REV_2_0)
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
 		div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
 	else
 		div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
@@ -389,7 +389,7 @@ static unsigned long get_rate_ahb(struct clk *clk)
 {
 	unsigned long rate, bclk_pdf;
 
-	if (mx27_revision() >= CHIP_REV_2_0)
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
 		bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
 	else
 		bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
@@ -402,7 +402,7 @@ static unsigned long get_rate_ipg(struct clk *clk)
 {
 	unsigned long rate, ipg_pdf;
 
-	if (mx27_revision() >= CHIP_REV_2_0)
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
 		return clk_get_rate(clk->parent);
 	else
 		ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
@@ -667,7 +667,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
@@ -683,7 +683,7 @@ static void __init to2_adjust_clocks(void)
 {
 	unsigned long cscr = __raw_readl(CCM_CSCR);
 
-	if (mx27_revision() >= CHIP_REV_2_0) {
+	if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
 		if (cscr & CCM_CSCR_ARM_SRC)
 			cpu_clk.parent = &mpll_main1_clk;
 
diff --git a/arch/arm/mach-imx/cpu-imx27.c b/arch/arm/mach-imx/cpu-imx27.c
index d8d3b2d84dc..3b117be37bd 100644
--- a/arch/arm/mach-imx/cpu-imx27.c
+++ b/arch/arm/mach-imx/cpu-imx27.c
@@ -42,7 +42,19 @@ static void query_silicon_parameter(void)
 	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
 				+ SYS_CHIP_ID));
 
-	cpu_silicon_rev = (int)(val >> 28);
+	switch (val >> 28) {
+	case 0:
+		cpu_silicon_rev = IMX_CHIP_REVISION_1_0;
+		break;
+	case 1:
+		cpu_silicon_rev = IMX_CHIP_REVISION_2_0;
+		break;
+	case 2:
+		cpu_silicon_rev = IMX_CHIP_REVISION_2_1;
+		break;
+	default:
+		cpu_silicon_rev = IMX_CHIP_REVISION_UNKNOWN;
+	}
 	cpu_partnumber = (int)((val >> 12) & 0xFFFF);
 }
 
diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h
index d189039749b..16744d2d9b8 100644
--- a/arch/arm/mach-imx/devices-imx21.h
+++ b/arch/arm/mach-imx/devices-imx21.h
@@ -9,10 +9,26 @@
 #include <mach/mx21.h>
 #include <mach/devices-common.h>
 
+extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst;
+#define imx21_add_imx21_hcd(pdata)	\
+	imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst;
+#define imx21_add_imx2_wdt(pdata)	\
+	imx_add_imx2_wdt(&imx21_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx21_imx_fb_data __initconst;
+#define imx21_add_imx_fb(pdata)	\
+	imx_add_imx_fb(&imx21_imx_fb_data, pdata)
+
 extern const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst;
 #define imx21_add_imx_i2c(pdata)	\
 	imx_add_imx_i2c(&imx21_imx_i2c_data, pdata)
 
+extern const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst;
+#define imx21_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx21_imx_keypad_data, pdata)
+
 extern const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst;
 #define imx21_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx21_imx_ssi_data[id], pdata)
@@ -25,10 +41,18 @@ extern const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst;
 #define imx21_add_imx_uart2(pdata)	imx21_add_imx_uart(2, pdata)
 #define imx21_add_imx_uart3(pdata)	imx21_add_imx_uart(3, pdata)
 
+extern const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst;
+#define imx21_add_mxc_mmc(id, pdata)	\
+	imx_add_mxc_mmc(&imx21_mxc_mmc_data[id], pdata)
+
 extern const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst;
 #define imx21_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx21_mxc_nand_data, pdata)
 
+extern const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst;
+#define imx21_add_mxc_w1(pdata)	\
+	imx_add_mxc_w1(&imx21_mxc_w1_data)
+
 extern const struct imx_spi_imx_data imx21_cspi_data[] __initconst;
 #define imx21_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx21_cspi_data[id], pdata)
diff --git a/arch/arm/mach-mx25/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h
index 93afa10b13c..bde33caf1b9 100644
--- a/arch/arm/mach-mx25/devices-imx25.h
+++ b/arch/arm/mach-imx/devices-imx25.h
@@ -13,10 +13,27 @@ extern const struct imx_fec_data imx25_fec_data __initconst;
 #define imx25_add_fec(pdata)	\
 	imx_add_fec(&imx25_fec_data, pdata)
 
-#define imx25_add_flexcan0(pdata)	\
-	imx_add_flexcan(0, MX25_CAN1_BASE_ADDR, SZ_16K, MX25_INT_CAN1, pdata)
-#define imx25_add_flexcan1(pdata)	\
-	imx_add_flexcan(1, MX25_CAN2_BASE_ADDR, SZ_16K, MX25_INT_CAN2, pdata)
+extern const struct imx_flexcan_data imx25_flexcan_data[] __initconst;
+#define imx25_add_flexcan(id, pdata)	\
+	imx_add_flexcan(&imx25_flexcan_data[id], pdata)
+#define imx25_add_flexcan0(pdata)	imx25_add_flexcan(0, pdata)
+#define imx25_add_flexcan1(pdata)	imx25_add_flexcan(1, pdata)
+
+extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst;
+#define imx25_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
+
+extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst;
+#define imx25_add_imxdi_rtc(pdata)	\
+	imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
+
+extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst;
+#define imx25_add_imx2_wdt(pdata)	\
+	imx_add_imx2_wdt(&imx25_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx25_imx_fb_data __initconst;
+#define imx25_add_imx_fb(pdata)	\
+	imx_add_imx_fb(&imx25_imx_fb_data, pdata)
 
 extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
 #define imx25_add_imx_i2c(id, pdata)	\
@@ -25,6 +42,10 @@ extern const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst;
 #define imx25_add_imx_i2c1(pdata)	imx25_add_imx_i2c(1, pdata)
 #define imx25_add_imx_i2c2(pdata)	imx25_add_imx_i2c(2, pdata)
 
+extern const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst;
+#define imx25_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
+
 extern const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst;
 #define imx25_add_imx_ssi(id, pdata)	\
 	imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
@@ -38,17 +59,29 @@ extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst;
 #define imx25_add_imx_uart3(pdata)	imx25_add_imx_uart(3, pdata)
 #define imx25_add_imx_uart4(pdata)	imx25_add_imx_uart(4, pdata)
 
+extern const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst;
+#define imx25_add_mx2_camera(pdata)	\
+	imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst;
+#define imx25_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst;
+#define imx25_add_mxc_ehci_hs(pdata)	\
+	imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
+
 extern const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst;
 #define imx25_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
 
-extern const struct imx_spi_imx_data imx25_spi_imx_data[] __initconst;
+extern const struct imx_sdhci_esdhc_imx_data
+imx25_sdhci_esdhc_imx_data[] __initconst;
+#define imx25_add_sdhci_esdhc_imx(id, pdata)	\
+	imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
+
+extern const struct imx_spi_imx_data imx25_cspi_data[] __initconst;
 #define imx25_add_spi_imx(id, pdata)	\
 	imx_add_spi_imx(&imx25_spi_imx_data[id], pdata)
 #define imx25_add_spi_imx0(pdata)	imx25_add_spi_imx(0, pdata)
 #define imx25_add_spi_imx1(pdata)	imx25_add_spi_imx(1, pdata)
 #define imx25_add_spi_imx2(pdata)	imx25_add_spi_imx(2, pdata)
-
-extern const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst;
-#define imx25_add_esdhc(id, pdata)	\
-	imx_add_esdhc(&imx25_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index 7011690364f..f1272d4b5a3 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -13,10 +13,26 @@ extern const struct imx_fec_data imx27_fec_data __initconst;
 #define imx27_add_fec(pdata)	\
 	imx_add_fec(&imx27_fec_data, pdata)
 
+extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst;
+#define imx27_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst;
+#define imx27_add_imx2_wdt(pdata)	\
+	imx_add_imx2_wdt(&imx27_imx2_wdt_data)
+
+extern const struct imx_imx_fb_data imx27_imx_fb_data __initconst;
+#define imx27_add_imx_fb(pdata)	\
+	imx_add_imx_fb(&imx27_imx_fb_data, pdata)
+
 extern const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst;
 #define imx27_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx27_imx_i2c_data[id], pdata)
 
+extern const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst;
+#define imx27_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx27_imx_keypad_data, pdata)
+
 extern const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst;
 #define imx27_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx27_imx_ssi_data[id], pdata)
@@ -31,10 +47,29 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst;
 #define imx27_add_imx_uart4(pdata)	imx27_add_imx_uart(4, pdata)
 #define imx27_add_imx_uart5(pdata)	imx27_add_imx_uart(5, pdata)
 
+extern const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst;
+#define imx27_add_mx2_camera(pdata)	\
+	imx_add_mx2_camera(&imx27_mx2_camera_data, pdata)
+
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst;
+#define imx27_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx27_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst;
+#define imx27_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx27_mxc_ehci_hs_data[id - 1], pdata)
+
+extern const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst;
+#define imx27_add_mxc_mmc(id, pdata)	\
+	imx_add_mxc_mmc(&imx27_mxc_mmc_data[id], pdata)
+
 extern const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst;
 #define imx27_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx27_mxc_nand_data, pdata)
 
+extern const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst;
+#define imx27_add_mxc_w1(pdata)	\
+	imx_add_mxc_w1(&imx27_mxc_w1_data)
+
 extern const struct imx_spi_imx_data imx27_cspi_data[] __initconst;
 #define imx27_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
deleted file mode 100644
index fba5047de8b..00000000000
--- a/arch/arm/mach-imx/devices.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/*
- * Author: MontaVista Software, Inc.
- *       <source@mvista.com>
- *
- * Based on the OMAP devices.c
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-#if defined(CONFIG_ARCH_MX1)
-static struct resource imx1_camera_resources[] = {
-	{
-		.start  = 0x00224000,
-		.end    = 0x00224010,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_CSI_INT,
-		.end    = MX1_CSI_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device imx1_camera_device = {
-	.name           = "mx1-camera",
-	.id             = 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask = &imx1_camera_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource       = imx1_camera_resources,
-	.num_resources  = ARRAY_SIZE(imx1_camera_resources),
-};
-
-static struct resource imx_rtc_resources[] = {
-	{
-		.start  = 0x00204000,
-		.end    = 0x00204024,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_RTC_INT,
-		.end    = MX1_RTC_INT,
-		.flags  = IORESOURCE_IRQ,
-	}, {
-		.start  = MX1_RTC_SAMINT,
-		.end    = MX1_RTC_SAMINT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_rtc_device = {
-	.name           = "rtc-imx",
-	.id             = 0,
-	.resource       = imx_rtc_resources,
-	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
-	{
-		.start  = 0x00201000,
-		.end    = 0x00201008,
-		.flags  = IORESOURCE_MEM,
-	}, {
-		.start  = MX1_WDT_INT,
-		.end    = MX1_WDT_INT,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_wdt_device = {
-	.name           = "imx-wdt",
-	.id             = 0,
-	.resource       = imx_wdt_resources,
-	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
-};
-
-static struct resource imx_usb_resources[] = {
-	{
-		.start	= 0x00212000,
-		.end	= 0x00212148,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MX1_USBD_INT0,
-		.end	= MX1_USBD_INT0,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT1,
-		.end	= MX1_USBD_INT1,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT2,
-		.end	= MX1_USBD_INT2,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT3,
-		.end	= MX1_USBD_INT3,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT4,
-		.end	= MX1_USBD_INT4,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT5,
-		.end	= MX1_USBD_INT5,
-		.flags	= IORESOURCE_IRQ,
-	}, {
-		.start	= MX1_USBD_INT6,
-		.end	= MX1_USBD_INT6,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_usb_device = {
-	.name		= "imx_udc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(imx_usb_resources),
-	.resource	= imx_usb_resources,
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
-		.irq = MX1_GPIO_INT_PORTA,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
-		.irq = MX1_GPIO_INT_PORTB,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
-		.irq = MX1_GPIO_INT_PORTC,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
-		.irq = MX1_GPIO_INT_PORTD,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}
-};
-
-int __init imx1_register_gpios(void)
-{
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
-#endif
-
-#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
-
-#ifdef CONFIG_MACH_MX27
-static struct resource mx27_camera_resources[] = {
-	{
-	       .start = MX27_CSI_BASE_ADDR,
-	       .end = MX27_CSI_BASE_ADDR + 0x1f,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MX27_EMMA_PRP_BASE_ADDR,
-	       .end = MX27_EMMA_PRP_BASE_ADDR + 0x1f,
-	       .flags = IORESOURCE_MEM,
-	}, {
-	       .start = MX27_INT_CSI,
-	       .end = MX27_INT_CSI,
-	       .flags = IORESOURCE_IRQ,
-	},{
-	       .start = MX27_INT_EMMAPRP,
-	       .end = MX27_INT_EMMAPRP,
-	       .flags = IORESOURCE_IRQ,
-	},
-};
-struct platform_device mx27_camera_device = {
-	.name = "mx2-camera",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mx27_camera_resources),
-	.resource = mx27_camera_resources,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-#endif
-
-/*
- * General Purpose Timer
- * - i.MX21: 3 timers
- * - i.MX27: 6 timers
- */
-#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)				\
-	static struct resource timer ## n ##_resources[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}							\
-	};								\
-									\
-	struct platform_device mxc_gpt ## n = {				\
-		.name = "imx_gpt",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(timer ## n ## _resources),	\
-		.resource = timer ## n ## _resources,			\
-	}
-
-/* We use gpt1 as system timer, so do not add a device for this one */
-DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
-DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
-DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
-DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
-#endif
-
-/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
-static struct resource mxc_wdt_resources[] = {
-	{
-		.start = MX2x_WDOG_BASE_ADDR,
-		.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_wdt = {
-	.name = "imx2-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
-	.resource = mxc_wdt_resources,
-};
-
-static struct resource mxc_w1_master_resources[] = {
-	{
-		.start = MX2x_OWIRE_BASE_ADDR,
-		.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_w1_master_device = {
-	.name = "mxc_w1",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
-	.resource = mxc_w1_master_resources,
-};
-
-/*
- * lcdc:
- * - i.MX1: the basic controller
- * - i.MX21: to be checked
- * - i.MX27: like i.MX1, with slightly variations
- */
-static struct resource mxc_fb[] = {
-	{
-		.start = MX2x_LCDC_BASE_ADDR,
-		.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_LCDC,
-		.end = MX2x_INT_LCDC,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* mxc lcd driver */
-struct platform_device mxc_fb_device = {
-	.name = "imx-fb",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fb),
-	.resource = mxc_fb,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource mxc_pwm_resources[] = {
-	{
-		.start = MX2x_PWM_BASE_ADDR,
-		.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_PWM,
-		.end = MX2x_INT_PWM,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_pwm_device = {
-	.name = "mxc_pwm",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources,
-};
-
-#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)			\
-	static struct resource mxc_sdhc_resources ## n[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}, {							\
-			.start = dmareq,				\
-			.end = dmareq,					\
-			.flags = IORESOURCE_DMA,			\
-		},							\
-	};								\
-									\
-	static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32);	\
-									\
-	struct platform_device mxc_sdhc_device ## n = {			\
-		.name = "mxc-mmc",					\
-		.id = n,						\
-		.dev = {						\
-			.dma_mask = &mxc_sdhc ## n ## _dmamask,		\
-			.coherent_dma_mask = DMA_BIT_MASK(32),		\
-		},							\
-		.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),	\
-		.resource = mxc_sdhc_resources ## n,		\
-	}
-
-DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
-DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
-
-#ifdef CONFIG_MACH_MX27
-static struct resource otg_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR,
-		.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB3,
-		.end = MX27_INT_USB3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-/* OTG gadget device */
-struct platform_device mxc_otg_udc_device = {
-	.name		= "fsl-usb2-udc",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &otg_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= otg_resources,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-};
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &otg_dmamask,
-	},
-	.resource = otg_resources,
-	.num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh1_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR + 0x200,
-		.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB1,
-		.end = MX27_INT_USB1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh1 = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &usbh1_dmamask,
-	},
-	.resource = mxc_usbh1_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-/* USB host 2 */
-static u64 usbh2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh2_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR + 0x400,
-		.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB2,
-		.end = MX27_INT_USB2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2 = {
-	.name = "mxc-ehci",
-	.id = 2,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &usbh2_dmamask,
-	},
-	.resource = mxc_usbh2_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-#endif
-
-/* GPIO port description */
-#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
-	{								\
-		.chip.label = "gpio-" #n,				\
-		.irq = _irq,						\
-		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
-				n * 0x100),				\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
-	}
-
-#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
-	{								\
-		.chip.label = "gpio-" #n,				\
-		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
-				n * 0x100),				\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
-	}
-
-#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
-	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
-		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
-		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
-	}
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_GPIO_PORTS(MX21, imx21);
-
-int __init imx21_register_gpios(void)
-{
-	return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-
-int __init imx27_register_gpios(void)
-{
-	return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_MACH_MX21
-static struct resource mx21_usbhc_resources[] = {
-	{
-		.start	= MX21_USBOTG_BASE_ADDR,
-		.end	= MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start		= MX21_INT_USBHOST,
-		.end		= MX21_INT_USBHOST,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx21_usbhc_device = {
-	.name		= "imx21-hcd",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(mx21_usbhc_resources),
-	.resource	= mx21_usbhc_resources,
-};
-#endif
-
-static struct resource imx_kpp_resources[] = {
-	{
-		.start  = MX2x_KPP_BASE_ADDR,
-		.end    = MX2x_KPP_BASE_ADDR + 0xf,
-		.flags  = IORESOURCE_MEM
-	}, {
-		.start  = MX2x_INT_KPP,
-		.end    = MX2x_INT_KPP,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_kpp_device = {
-	.name = "imx-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(imx_kpp_resources),
-	.resource = imx_kpp_resources,
-};
-
-#endif
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
deleted file mode 100644
index 807f02a031c..00000000000
--- a/arch/arm/mach-imx/devices.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifdef CONFIG_ARCH_MX1
-extern struct platform_device imx1_camera_device;
-extern struct platform_device imx_rtc_device;
-extern struct platform_device imx_wdt_device;
-extern struct platform_device imx_usb_device;
-#endif
-
-#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
-extern struct platform_device mxc_gpt1;
-extern struct platform_device mxc_gpt2;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_gpt3;
-extern struct platform_device mxc_gpt4;
-extern struct platform_device mxc_gpt5;
-#endif
-extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_w1_master_device;
-extern struct platform_device mxc_fb_device;
-extern struct platform_device mxc_pwm_device;
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mx27_camera_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mx21_usbhc_device;
-extern struct platform_device imx_kpp_device;
-#endif
diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c
index 3e8c47c63ba..e9f1769b49f 100644
--- a/arch/arm/mach-imx/dma-v1.c
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -818,9 +818,11 @@ static int __init imx_dma_init(void)
 		imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
 	else
 #endif
-		BUG();
+		return 0;
 
 	dma_clk = clk_get(NULL, "dma");
+	if (IS_ERR(dma_clk))
+		return PTR_ERR(dma_clk);
 	clk_enable(dma_clk);
 
 	/* reset DMA module */
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 026263c665c..275c8589d79 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -26,20 +26,16 @@
 #include <linux/spi/ads7846.h>
 #include <linux/backlight.h>
 #include <video/platform_lcd.h>
-#include <linux/input/matrix_keypad.h>
 
 #include <asm/mach/arch.h>
 
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
 #include <mach/hardware.h>
-#include <mach/mmc.h>
 #include <mach/spi.h>
 #include <mach/audmux.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int eukrea_mbimx27_pins[] __initconst = {
 	/* UART2 */
@@ -111,7 +107,8 @@ static const uint32_t eukrea_mbimx27_keymap[] = {
 	KEY(1, 1, KEY_LEFT),
 };
 
-static struct matrix_keymap_data eukrea_mbimx27_keymap_data = {
+static const struct matrix_keymap_data
+eukrea_mbimx27_keymap_data __initconst = {
 	.keymap         = eukrea_mbimx27_keymap,
 	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
 };
@@ -196,7 +193,7 @@ static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
+static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
 	.mode = eukrea_mbimx27_modes,
 	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
 
@@ -250,9 +247,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
 #define ADS7846_PENDOWN (GPIO_PORTD | 25)
 
 static void ads7846_dev_init(void)
@@ -273,9 +267,7 @@ static struct ads7846_platform_data ads7846_config __initdata = {
 	.get_pendown_state	= ads7846_get_pendown_state,
 	.keep_vref_on		= 1,
 };
-#endif
 
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
 	[0] = {
 		.modalias	= "ads7846",
@@ -294,7 +286,6 @@ static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
 	.chipselect	= eukrea_mbimx27_spi_cs,
 	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
 };
-#endif
 
 static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
 	{
@@ -306,7 +297,7 @@ static struct platform_device *platform_devices[] __initdata = {
 	&leds_gpio,
 };
 
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.dat3_card_detect = 1,
 };
 
@@ -351,8 +342,8 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	imx27_add_imx_uart3(&uart_pdata);
 #endif
 
-	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
+	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
+	imx27_add_mxc_mmc(0, &sdhc_pdata);
 
 	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
 				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
@@ -386,7 +377,7 @@ void __init eukrea_mbimx27_baseboard_init(void)
 	gpio_request(GPIO_PORTA | 25, "lcd_enable");
 	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
 
-	mxc_register_device(&imx_kpp_device, &eukrea_mbimx27_keymap_data);
+	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index e765ac5d9a0..cb705c28de0 100644
--- a/arch/arm/mach-mx25/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -33,13 +33,11 @@
 #include <asm/mach/arch.h>
 #include <mach/mx25.h>
 #include <mach/imx-uart.h>
-#include <mach/imxfb.h>
 #include <mach/audmux.h>
 
 #include "devices-imx25.h"
-#include "devices.h"
 
-static struct pad_desc eukrea_mbimxsd_pads[] = {
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* LCD */
 	MX25_PAD_LD0__LD0,
 	MX25_PAD_LD1__LD1,
@@ -151,7 +149,7 @@ static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data eukrea_mximxsd_fb_pdata = {
+static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
 	.mode		= eukrea_mximxsd_modes,
 	.num_modes	= ARRAY_SIZE(eukrea_mximxsd_modes),
 	.pwmr		= 0x00A903FF,
@@ -273,11 +271,11 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
 #endif
 
 	imx25_add_imx_uart1(&uart_pdata);
-	mxc_register_device(&mx25_fb_device, &eukrea_mximxsd_fb_pdata);
+	imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
 	imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
 	imx25_add_flexcan1(NULL);
-	imx25_add_esdhc(0, NULL);
+	imx25_add_sdhci_esdhc_imx(0, NULL);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 745ee60fb06..6cf04da2456 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -28,7 +28,6 @@
 #include <linux/serial_8250.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -40,11 +39,9 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int eukrea_cpuimx27_pins[] __initconst = {
 	/* UART1 */
@@ -157,8 +154,6 @@ cpuimx27_nand_board_info __initconst = {
 
 static struct platform_device *platform_devices[] __initdata = {
 	&eukrea_cpuimx27_nor_mtd_device,
-	&mxc_wdt,
-	&mxc_w1_master_device,
 };
 
 static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
@@ -215,18 +210,18 @@ static struct platform_device serial_device = {
 #endif
 
 #if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_ULPI,
 };
@@ -262,10 +257,12 @@ static void __init eukrea_cpuimx27_init(void)
 
 	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_imx2_wdt(NULL);
+	imx27_add_mxc_w1(NULL);
 
 #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
 	/* SDHC2 can be used for Wifi */
-	mxc_register_device(&mxc_sdhc_device1, NULL);
+	imx27_add_mxc_mmc(1, NULL);
 #endif
 #if defined(MACH_EUKREA_CPUIMX27_USEUART4)
 	/* in which case UART4 is also used for Bluetooth */
@@ -281,16 +278,16 @@ static void __init eukrea_cpuimx27_init(void)
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
+		imx27_add_mxc_ehci_otg(&otg_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 #endif
 	if (!otg_mode_host)
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
 	eukrea_mbimx27_baseboard_init();
diff --git a/arch/arm/mach-mx25/mach-cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index f6f9ad60c25..eb395aba923 100644
--- a/arch/arm/mach-mx25/mach-cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -26,7 +26,6 @@
 #include <linux/platform_device.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
 
 #include <mach/eukrea-baseboards.h>
 #include <mach/hardware.h>
@@ -39,17 +38,15 @@
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include <mach/imxfb.h>
-#include <mach/mxc_ehci.h>
 #include <mach/iomux-mx25.h>
 
 #include "devices-imx25.h"
-#include "devices.h"
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct pad_desc eukrea_cpuimx25_pads[] = {
+static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
 	/* FEC - RMII */
 	MX25_PAD_FEC_MDC__FEC_MDC,
 	MX25_PAD_FEC_MDIO__FEC_MDIO,
@@ -87,18 +84,18 @@ static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
 	},
 };
 
-static struct mxc_usbh_platform_data otg_pdata = {
+static const struct mxc_usbh_platform_data otg_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_SERIAL,
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
 };
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_UTMI,
 };
@@ -126,7 +123,7 @@ static void __init eukrea_cpuimx25_init(void)
 
 	imx25_add_imx_uart0(&uart_pdata);
 	imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
-	mxc_register_device(&mx25_rtc_device, NULL);
+	imx25_add_imxdi_rtc(NULL);
 	imx25_add_fec(&mx25_fec_pdata);
 
 	i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
@@ -134,11 +131,11 @@ static void __init eukrea_cpuimx25_init(void)
 	imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_otg, &otg_pdata);
+		imx25_add_mxc_ehci_otg(&otg_pdata);
 	else
-		mxc_register_device(&otg_udc_device, &otg_device_pdata);
+		imx25_add_fsl_usb2_udc(&otg_device_pdata);
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx25_add_mxc_ehci_hs(&usbh2_pdata);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
 	eukrea_mbimxsd25_baseboard_init();
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 59716fab586..40a3666ea63 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -34,12 +34,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
-#include <mach/mmc.h>
 #include <mach/iomux.h>
-#include <mach/mxc_ehci.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
 #define SDHC1_IRQ IRQ_GPIOB(25)
@@ -156,7 +153,7 @@ static void visstrim_m10_sdhc1_exit(struct device *dev, void *data)
 	free_irq(SDHC1_IRQ, data);
 }
 
-static struct imxmmc_platform_data visstrim_m10_sdhc_pdata = {
+static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = {
 	.init = visstrim_m10_sdhc1_init,
 	.exit = visstrim_m10_sdhc1_exit,
 };
@@ -216,7 +213,8 @@ static int otg_phy_init(struct platform_device *pdev)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data visstrim_m10_usbotg_pdata = {
+static const struct mxc_usbh_platform_data
+visstrim_m10_usbotg_pdata __initconst = {
 	.init = otg_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
@@ -237,8 +235,8 @@ static void __init visstrim_m10_board_init(void)
 				ARRAY_SIZE(visstrim_m10_i2c_devices));
 	imx27_add_imx_i2c(0, &visstrim_m10_i2c_data);
 	imx27_add_imx_i2c(1, &visstrim_m10_i2c_data);
-	mxc_register_device(&mxc_sdhc_device0, &visstrim_m10_sdhc_pdata);
-	mxc_register_device(&mxc_otg_host, &visstrim_m10_usbotg_pdata);
+	imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
+	imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
 	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 }
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index bbdbc75127d..3a1202e4721 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -25,7 +25,6 @@
 #include <mach/iomux-mx27.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int mx27lite_pins[] __initconst = {
 	/* UART1 */
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 6187ce9ba7d..1f446e5eb63 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -30,7 +30,6 @@
 #include <mach/irqs.h>
 
 #include "devices-imx1.h"
-#include "devices.h"
 
 static const int mx1ads_pins[] __initconst = {
 	/* UART1 */
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index e1282e9f50f..0a372577c2a 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -24,13 +24,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/imxfb.h>
 #include <mach/iomux-mx21.h>
 #include <mach/mxc_nand.h>
-#include <mach/mmc.h>
 
 #include "devices-imx21.h"
-#include "devices.h"
 
 /*
  * Memory-mapped I/O on MX21ADS base board
@@ -213,7 +210,7 @@ static struct imx_fb_videomode mx21ads_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data mx21ads_fb_data = {
+static const struct imx_fb_platform_data mx21ads_fb_data __initconst = {
 	.mode = mx21ads_modes,
 	.num_modes = ARRAY_SIZE(mx21ads_modes),
 
@@ -233,15 +230,8 @@ static int mx21ads_sdhc_get_ro(struct device *dev)
 static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
 	void *data)
 {
-	int ret;
-
-	ret = request_irq(IRQ_GPIOD(25), detect_irq,
+	return request_irq(IRQ_GPIOD(25), detect_irq,
 		IRQF_TRIGGER_FALLING, "mmc-detect", data);
-	if (ret)
-		goto out;
-	return 0;
-out:
-	return ret;
 }
 
 static void mx21ads_sdhc_exit(struct device *dev, void *data)
@@ -249,7 +239,7 @@ static void mx21ads_sdhc_exit(struct device *dev, void *data)
 	free_irq(IRQ_GPIOD(25), data);
 }
 
-static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = {
 	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
 	.get_ro = mx21ads_sdhc_get_ro,
 	.init = mx21ads_sdhc_init,
@@ -296,8 +286,8 @@ static void __init mx21ads_board_init(void)
 	imx21_add_imx_uart0(&uart_pdata_rts);
 	imx21_add_imx_uart2(&uart_pdata_norts);
 	imx21_add_imx_uart3(&uart_pdata_rts);
-	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+	imx21_add_imx_fb(&mx21ads_fb_data);
+	imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata);
 	imx21_add_mxc_nand(&mx21ads_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
diff --git a/arch/arm/mach-mx25/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index f8be1eb0c06..aa76cfd9f34 100644
--- a/arch/arm/mach-mx25/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -30,6 +30,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/usb/otg.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -39,17 +40,15 @@
 #include <asm/mach/map.h>
 #include <mach/common.h>
 #include <mach/mx25.h>
-#include <mach/imxfb.h>
 #include <mach/iomux-mx25.h>
 
 #include "devices-imx25.h"
-#include "devices.h"
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct pad_desc mx25pdk_pads[] = {
+static iomux_v3_cfg_t mx25pdk_pads[] = {
 	MX25_PAD_FEC_MDC__FEC_MDC,
 	MX25_PAD_FEC_MDIO__FEC_MDIO,
 	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
@@ -107,7 +106,7 @@ static struct pad_desc mx25pdk_pads[] = {
 };
 
 static const struct fec_platform_data mx25_fec_pdata __initconst = {
-        .phy    = PHY_INTERFACE_MODE_RMII,
+	.phy    = PHY_INTERFACE_MODE_RMII,
 };
 
 #define FEC_ENABLE_GPIO		35
@@ -154,7 +153,7 @@ static struct imx_fb_videomode mx25pdk_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data mx25pdk_fb_pdata = {
+static const struct imx_fb_platform_data mx25pdk_fb_pdata __initconst = {
 	.mode		= mx25pdk_modes,
 	.num_modes	= ARRAY_SIZE(mx25pdk_modes),
 	.pwmr		= 0x00A903FF,
@@ -181,28 +180,39 @@ static const uint32_t mx25pdk_keymap[] = {
 	KEY(3, 3, KEY_POWER),
 };
 
-static struct matrix_keymap_data mx25pdk_keymap_data = {
+static const struct matrix_keymap_data mx25pdk_keymap_data __initdata = {
 	.keymap		= mx25pdk_keymap,
 	.keymap_size	= ARRAY_SIZE(mx25pdk_keymap),
 };
 
+static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
+	.portsc	= MXC_EHCI_MODE_SERIAL,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_UTMI,
+};
+
 static void __init mx25pdk_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
 			ARRAY_SIZE(mx25pdk_pads));
 
 	imx25_add_imx_uart0(&uart_pdata);
-	mxc_register_device(&mxc_usbh2, NULL);
+	imx25_add_fsl_usb2_udc(&otg_device_pdata);
+	imx25_add_mxc_ehci_hs(&usbh2_pdata);
 	imx25_add_mxc_nand(&mx25pdk_nand_board_info);
-	mxc_register_device(&mx25_rtc_device, NULL);
-	mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
-	mxc_register_device(&mxc_wdt, NULL);
+	imx25_add_imxdi_rtc(NULL);
+	imx25_add_imx_fb(&mx25pdk_fb_pdata);
+	imx25_add_imx2_wdt(NULL);
 
 	mx25pdk_fec_reset();
 	imx25_add_fec(&mx25_fec_pdata);
-	mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
+	imx25_add_imx_keypad(&mx25pdk_keymap_data);
 
-	imx25_add_esdhc(0, NULL);
+	imx25_add_sdhci_esdhc_imx(0, NULL);
 }
 
 static void __init mx25pdk_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 84a5ba03f1b..6fd0f8f6deb 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -22,20 +22,27 @@
 
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/irq.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/delay.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/machine.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
-#include <mach/mmc.h>
+#include <mach/ulpi.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 #define SD1_EN_GPIO (GPIO_PORTB + 25)
+#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23)
+#define SPI2_SS0 (GPIO_PORTD + 21)
 
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
@@ -70,6 +77,24 @@ static const int mx27pdk_pins[] __initconst = {
 	PE22_PF_SD1_CMD,
 	PE23_PF_SD1_CLK,
 	SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
+	/* OTG */
+	OTG_PHY_RESET_GPIO | GPIO_GPIO | GPIO_OUT,
+	PC7_PF_USBOTG_DATA5,
+	PC8_PF_USBOTG_DATA6,
+	PC9_PF_USBOTG_DATA0,
+	PC10_PF_USBOTG_DATA2,
+	PC11_PF_USBOTG_DATA1,
+	PC12_PF_USBOTG_DATA4,
+	PC13_PF_USBOTG_DATA3,
+	PE0_PF_USBOTG_NXT,
+	PE1_PF_USBOTG_STP,
+	PE2_PF_USBOTG_DIR,
+	PE24_PF_USBOTG_CLK,
+	PE25_PF_USBOTG_DATA7,
+	/* CSPI2 */
+	PD22_PF_CSPI2_SCLK,
+	PD23_PF_CSPI2_MISO,
+	PD24_PF_CSPI2_MOSI,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -92,7 +117,7 @@ static const uint32_t mx27_3ds_keymap[] = {
 	KEY(2, 3, KEY_F10),
 };
 
-static struct matrix_keymap_data mx27_3ds_keymap_data = {
+static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
 	.keymap		= mx27_3ds_keymap,
 	.keymap_size	= ARRAY_SIZE(mx27_3ds_keymap),
 };
@@ -109,7 +134,7 @@ static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
 	free_irq(IRQ_GPIOB(26), data);
 }
 
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
 	.init = mx27_3ds_sdhc1_init,
 	.exit = mx27_3ds_sdhc1_exit,
 };
@@ -121,6 +146,111 @@ static void mx27_3ds_sdhc1_enable_level_translator(void)
 	gpio_direction_output(SD1_EN_GPIO, 1);
 }
 
+
+static int otg_phy_init(void)
+{
+	gpio_request(OTG_PHY_RESET_GPIO, "usb-otg-reset");
+	gpio_direction_output(OTG_PHY_RESET_GPIO, 0);
+	mdelay(1);
+	gpio_set_value(OTG_PHY_RESET_GPIO, 1);
+	return 0;
+}
+
+#if defined(CONFIG_USB_ULPI)
+
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
+};
+#endif
+
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
+	.operating_mode = FSL_USB2_DR_DEVICE,
+	.phy_mode       = FSL_USB2_PHY_ULPI,
+};
+
+static int otg_mode_host;
+
+static int __init mx27_3ds_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", mx27_3ds_otg_mode);
+
+/* Regulators */
+static struct regulator_consumer_supply vmmc1_consumers[] = {
+	REGULATOR_SUPPLY("lcd_2v8", NULL),
+};
+
+static struct regulator_init_data vmmc1_init = {
+	.constraints = {
+		.min_uV	= 2800000,
+		.max_uV = 2800000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
+	.consumer_supplies = vmmc1_consumers,
+};
+
+static struct regulator_consumer_supply vgen_consumers[] = {
+	REGULATOR_SUPPLY("vdd_lcdio", NULL),
+};
+
+static struct regulator_init_data vgen_init = {
+	.constraints = {
+		.min_uV	= 1800000,
+		.max_uV = 1800000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(vgen_consumers),
+	.consumer_supplies = vgen_consumers,
+};
+
+static struct mc13783_regulator_init_data mx27_3ds_regulators[] = {
+	{
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &vmmc1_init,
+	}, {
+		.id = MC13783_REGU_VGEN,
+		.init_data = &vgen_init,
+	},
+};
+
+/* MC13783 */
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.regulators = mx27_3ds_regulators,
+	.num_regulators = ARRAY_SIZE(mx27_3ds_regulators),
+	.flags  = MC13783_USE_REGULATOR,
+};
+
+/* SPI */
+static int spi2_internal_chipselect[] = {SPI2_SS0};
+
+static const struct spi_imx_master spi2_pdata __initconst = {
+	.chipselect	= spi2_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi2_internal_chipselect),
+};
+
+static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
+	{
+		.modalias	= "mc13783",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 1,
+		.chip_select	= 0, /* SS0 */
+		.platform_data	= &mc13783_pdata,
+		.irq = IRQ_GPIOC(14),
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+
 static void __init mx27pdk_init(void)
 {
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
@@ -128,8 +258,24 @@ static void __init mx27pdk_init(void)
 	mx27_3ds_sdhc1_enable_level_translator();
 	imx27_add_imx_uart0(&uart_pdata);
 	imx27_add_fec(NULL);
-	mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	imx27_add_imx_keypad(&mx27_3ds_keymap_data);
+	imx27_add_mxc_mmc(0, &sdhc1_pdata);
+	imx27_add_imx2_wdt(NULL);
+	otg_phy_init();
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+
+		imx27_add_mxc_ehci_otg(&otg_pdata);
+	}
+#endif
+	if (!otg_mode_host)
+		imx27_add_fsl_usb2_udc(&otg_device_pdata);
+
+	imx27_add_spi_imx1(&spi2_pdata);
+	spi_register_board_info(mx27_3ds_spi_devs,
+						ARRAY_SIZE(mx27_3ds_spi_devs));
 }
 
 static void __init mx27pdk_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index a1e4bc573af..b832f960fec 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -30,11 +30,8 @@
 #include <mach/gpio.h>
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 /*
  * Base address of PBC controller, CS4
@@ -228,7 +225,7 @@ static struct imx_fb_videomode mx27ads_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data mx27ads_fb_data = {
+static const struct imx_fb_platform_data mx27ads_fb_data __initconst = {
 	.mode = mx27ads_modes,
 	.num_modes = ARRAY_SIZE(mx27ads_modes),
 
@@ -272,19 +269,18 @@ static void mx27ads_sdhc2_exit(struct device *dev, void *data)
 	free_irq(IRQ_GPIOB(7), data);
 }
 
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
 	.init = mx27ads_sdhc1_init,
 	.exit = mx27ads_sdhc1_exit,
 };
 
-static struct imxmmc_platform_data sdhc2_pdata = {
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
 	.init = mx27ads_sdhc2_init,
 	.exit = mx27ads_sdhc2_exit,
 };
 
 static struct platform_device *platform_devices[] __initdata = {
 	&mx27ads_nor_mtd_device,
-	&mxc_w1_master_device,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -308,12 +304,13 @@ static void __init mx27ads_board_init(void)
 	i2c_register_board_info(1, mx27ads_i2c_devices,
 				ARRAY_SIZE(mx27ads_i2c_devices));
 	imx27_add_imx_i2c(1, &mx27ads_i2c1_data);
-	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
-	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
+	imx27_add_imx_fb(&mx27ads_fb_data);
+	imx27_add_mxc_mmc(0, &sdhc1_pdata);
+	imx27_add_mxc_mmc(1, &sdhc2_pdata);
 
 	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_mxc_w1(NULL);
 }
 
 static void __init mx27ads_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index 38d3a4ae17c..4ce71b0401d 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -31,11 +31,8 @@
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
 #include <linux/i2c/pca953x.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int mxt_td60_pins[] __initconst = {
 	/* UART0 */
@@ -196,7 +193,7 @@ static struct imx_fb_videomode mxt_td60_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data mxt_td60_fb_data = {
+static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
 	.mode = mxt_td60_modes,
 	.num_modes = ARRAY_SIZE(mxt_td60_modes),
 
@@ -226,7 +223,7 @@ static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
 	free_irq(IRQ_GPIOF(8), data);
 }
 
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
 	.init = mxt_td60_sdhc1_init,
 	.exit = mxt_td60_sdhc1_exit,
 };
@@ -253,8 +250,8 @@ static void __init mxt_td60_board_init(void)
 
 	imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
 	imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
-	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+	imx27_add_imx_fb(&mxt_td60_fb_data);
+	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_fec(NULL);
 }
 
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 8c720d44602..cccc0a0a9c7 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -29,7 +29,6 @@
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -40,13 +39,9 @@
 #include <mach/audmux.h>
 #include <mach/mxc_nand.h>
 #include <mach/irqs.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
-#include <mach/imxfb.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 #define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
 #define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
@@ -171,11 +166,6 @@ pca100_nand_board_info __initconst = {
 	.hw_ecc = 1,
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_w1_master_device,
-	&mxc_wdt,
-};
-
 static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
@@ -274,7 +264,7 @@ static void pca100_sdhc2_exit(struct device *dev, void *data)
 	free_irq(IRQ_GPIOC(29), data);
 }
 
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.init = pca100_sdhc2_init,
 	.exit = pca100_sdhc2_exit,
 };
@@ -286,7 +276,7 @@ static int otg_phy_init(struct platform_device *pdev)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.init	= otg_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -298,14 +288,14 @@ static int usbh2_phy_init(struct platform_device *pdev)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_ULPI,
 };
@@ -355,7 +345,7 @@ static struct imx_fb_videomode pca100_fb_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data pca100_fb_data = {
+static const struct imx_fb_platform_data pca100_fb_data __initconst = {
 	.mode = pca100_fb_modes,
 	.num_modes = ARRAY_SIZE(pca100_fb_modes),
 
@@ -389,7 +379,7 @@ static void __init pca100_init(void)
 
 	imx27_add_imx_uart0(&uart_pdata);
 
-	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+	imx27_add_mxc_mmc(1, &sdhc_pdata);
 
 	imx27_add_mxc_nand(&pca100_nand_board_info);
 
@@ -417,23 +407,24 @@ static void __init pca100_init(void)
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
+		imx27_add_mxc_ehci_otg(&otg_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 #endif
 	if (!otg_mode_host) {
 		gpio_set_value(OTG_PHY_CS_GPIO, 0);
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 	}
 
-	mxc_register_device(&mxc_fb_device, &pca100_fb_data);
+	imx27_add_imx_fb(&pca100_fb_data);
 
 	imx27_add_fec(NULL);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_imx2_wdt(NULL);
+	imx27_add_mxc_w1(NULL);
 }
 
 static void __init pca100_timer_init(void)
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 49a97ce0742..f667a262dfc 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -37,11 +37,9 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx27.h>
 #include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx27.h"
-#include "devices.h"
 
 static const int pcm038_pins[] __initconst = {
 	/* UART1 */
@@ -172,9 +170,7 @@ pcm038_nand_board_info __initconst = {
 
 static struct platform_device *platform_devices[] __initdata = {
 	&pcm038_nor_mtd_device,
-	&mxc_w1_master_device,
 	&pcm038_sram_mtd_device,
-	&mxc_wdt,
 };
 
 /* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
@@ -214,7 +210,7 @@ static const struct spi_imx_master pcm038_spi0_data __initconst = {
 
 static struct regulator_consumer_supply sdhc1_consumers[] = {
 	{
-		.dev	= &mxc_sdhc_device1.dev,
+		.dev_name = "mxc-mmc.1",
 		.supply	= "sdhc_vcc",
 	},
 };
@@ -285,7 +281,7 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = {
 	}
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
@@ -322,10 +318,12 @@ static void __init pcm038_init(void)
 	spi_register_board_info(pcm038_spi_board_info,
 				ARRAY_SIZE(pcm038_spi_board_info));
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 
 	imx27_add_fec(NULL);
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+	imx27_add_imx2_wdt(NULL);
+	imx27_add_mxc_w1(NULL);
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD
 	pcm970_baseboard_init();
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 1fbdd3faa7a..eae878f306c 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -25,7 +25,6 @@
 #include <mach/iomux-mx1.h>
 
 #include "devices-imx1.h"
-#include "devices.h"
 
 /*
  * This scb9328 has a 32MiB flash
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 9be92b96dc8..729ae0915af 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -25,12 +25,7 @@
 #include <mach/hardware.h>
 
 static struct map_desc imx_io_desc[] __initdata = {
-	{
-		.virtual = MX1_IO_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX1_IO_BASE_ADDR),
-		.length = MX1_IO_SIZE,
-		.type = MT_DEVICE
-	}
+	imx_map_entry(MX1, IO, MT_DEVICE),
 };
 
 void __init mx1_map_io(void)
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 12faeeaa0a9..e728af81d1b 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -35,33 +35,18 @@ static struct map_desc imx21_io_desc[] __initdata = {
 	 * - ROM Patch
 	 * - and some reserved space
 	 */
-	{
-		.virtual = MX21_AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
-		.length = MX21_AIPI_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX21, AIPI, MT_DEVICE),
 	/*
 	 * this fixed mapping covers:
 	 * - CSI
 	 * - ATA
 	 */
-	{
-		.virtual = MX21_SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
-		.length = MX21_SAHB1_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX21, SAHB1, MT_DEVICE),
 	/*
 	 * this fixed mapping covers:
 	 * - EMI
 	 */
-	{
-		.virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
-		.length = MX21_X_MEMC_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX21, X_MEMC, MT_DEVICE),
 };
 
 /*
diff --git a/arch/arm/mach-mx25/mm.c b/arch/arm/mach-imx/mm-imx25.c
index bb677111fb0..2edec6ce8fe 100644
--- a/arch/arm/mach-mx25/mm.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -30,25 +30,12 @@
 
 /*
  * This table defines static virtual address mappings for I/O regions.
- * These are the mappings common across all MX3 boards.
+ * These are the mappings common across all MX25 boards.
  */
-static struct map_desc mxc_io_desc[] __initdata = {
-	{
-		.virtual	= MX25_AVIC_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MX25_AVIC_BASE_ADDR),
-		.length		= MX25_AVIC_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= MX25_AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MX25_AIPS1_BASE_ADDR),
-		.length		= MX25_AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= MX25_AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MX25_AIPS2_BASE_ADDR),
-		.length		= MX25_AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	},
+static struct map_desc mx25_io_desc[] __initdata = {
+	imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
 };
 
 /*
@@ -62,14 +49,14 @@ void __init mx25_map_io(void)
 	mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
 
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+	iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
 }
 
 int imx25_register_gpios(void);
 
 void __init mx25_init_irq(void)
 {
-	mxc_init_irq((void __iomem *)MX25_AVIC_BASE_ADDR_VIRT);
+	mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
 	imx25_register_gpios();
 }
 
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index a24622957ff..374e48b7a41 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -35,33 +35,18 @@ static struct map_desc imx27_io_desc[] __initdata = {
 	 * - ROM Patch
 	 * - and some reserved space
 	 */
-	{
-		.virtual = MX27_AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
-		.length = MX27_AIPI_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX27, AIPI, MT_DEVICE),
 	/*
 	 * this fixed mapping covers:
 	 * - CSI
 	 * - ATA
 	 */
-	{
-		.virtual = MX27_SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
-		.length = MX27_SAHB1_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX27, SAHB1, MT_DEVICE),
 	/*
 	 * this fixed mapping covers:
 	 * - EMI
 	 */
-	{
-		.virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
-		.length = MX27_X_MEMC_SIZE,
-		.type = MT_DEVICE
-	},
+	imx_map_entry(MX27, X_MEMC, MT_DEVICE),
 };
 
 /*
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index 9110d9cca7a..99afbc3f43a 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -25,11 +25,9 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
 #include <mach/hardware.h>
-#include <mach/mmc.h>
 
-#include "devices.h"
+#include "devices-imx27.h"
 
 static const int pcm970_pins[] __initconst = {
 	/* SDHC */
@@ -119,7 +117,7 @@ static void pcm970_sdhc2_exit(struct device *dev, void *data)
 	gpio_free(GPIO_PORTC + 28);
 }
 
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.get_ro = pcm970_sdhc2_get_ro,
 	.init = pcm970_sdhc2_init,
 	.exit = pcm970_sdhc2_exit,
@@ -179,7 +177,7 @@ static struct imx_fb_videomode pcm970_modes[] = {
 	},
 };
 
-static struct imx_fb_platform_data pcm038_fb_data = {
+static const struct imx_fb_platform_data pcm038_fb_data __initconst = {
 	.mode = pcm970_modes,
 	.num_modes = ARRAY_SIZE(pcm970_modes),
 
@@ -226,8 +224,8 @@ void __init pcm970_baseboard_init(void)
 	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
 			"PCM970");
 
-	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	imx27_add_imx_fb(&pcm038_fb_data);
 	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
-	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
+	imx27_add_mxc_mmc(1, &sdhc_pdata);
 	platform_device_register(&pcm970_sja1000);
 }
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index afc17ce0bb5..6bf81ceea13 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -39,6 +39,9 @@ static struct platform_suspend_ops mx27_suspend_ops = {
 
 static int __init mx27_pm_init(void)
 {
+	if (!cpu_is_mx27())
+		return 0;
+
 	suspend_set_ops(&mx27_suspend_ops);
 	return 0;
 }
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 27db275b367..769b0f10c83 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -4,6 +4,7 @@ menu "Integrator Options"
 
 config ARCH_INTEGRATOR_AP
 	bool "Support Integrator/AP and Integrator/PP2 platforms"
+	select MIGHT_HAVE_PCI
 	help
 	  Include support for the ARM(R) Integrator/AP and
 	  Integrator/PP2 platforms.
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 8f4fb6d638f..b8e884b450d 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -21,9 +21,8 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 #include <linux/io.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
-#include <mach/clkdev.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index fd684bf205e..5db574f8ae3 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -22,9 +22,8 @@
 #include <linux/amba/clcd.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
-#include <mach/clkdev.h>
 #include <asm/hardware/icst.h>
 #include <mach/lm.h>
 #include <mach/impd1.h>
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
index e056e7cf564..2f5a2bafb11 100644
--- a/arch/arm/mach-integrator/include/mach/vmalloc.h
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 548208f1117..2774df8021d 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -372,7 +372,6 @@ static struct clocksource clocksource_timersp = {
 	.rating		= 200,
 	.read		= timersp_read,
 	.mask		= CLOCKSOURCE_MASK(16),
-	.shift		= 16,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -390,8 +389,7 @@ static void integrator_clocksource_init(u32 khz)
 	writel(ctrl, base + TIMER_CTRL);
 	writel(0xffff, base + TIMER_LOAD);
 
-	cs->mult = clocksource_khz2mult(khz, cs->shift);
-	clocksource_register(cs);
+	clocksource_register_khz(cs, khz);
 }
 
 static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE;
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 6258c90d020..85e48a5f77b 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -21,9 +21,8 @@
 #include <linux/amba/mmci.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
-#include <mach/clkdev.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
 #include <asm/irq.h>
@@ -41,7 +40,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <plat/timer-sp.h>
+#include <asm/hardware/timer-sp.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-iop13xx/include/mach/io.h b/arch/arm/mach-iop13xx/include/mach/io.h
index a6e0f9e6ddc..dffb234bb96 100644
--- a/arch/arm/mach-iop13xx/include/mach/io.h
+++ b/arch/arm/mach-iop13xx/include/mach/io.h
@@ -35,7 +35,7 @@ extern u32 iop13xx_atux_mem_base;
 extern size_t iop13xx_atue_mem_size;
 extern size_t iop13xx_atux_mem_size;
 
-#define __arch_ioremap(a, s, f) __iop13xx_ioremap(a, s, f)
-#define __arch_iounmap(a)	 __iop13xx_iounmap(a)
+#define __arch_ioremap	__iop13xx_ioremap
+#define __arch_iounmap	__iop13xx_iounmap
 
 #endif
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 7415e433865..3ad45531886 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -58,13 +58,13 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 		__dma;							\
 	})
 
-#define __arch_page_to_dma(dev, page)					\
+#define __arch_pfn_to_dma(dev, pfn)					\
 	({								\
 		/* __is_lbus_virt() can never be true for RAM pages */	\
-		(dma_addr_t)page_to_phys(page);				\
+		(dma_addr_t)__pfn_to_phys(pfn);				\
 	})
 
-#define __arch_dma_to_page(dev, addr)	phys_to_page(addr)
+#define __arch_dma_to_pfn(dev, addr)	__phys_to_pfn(addr)
 
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
index 339e5854728..059c783ce0b 100644
--- a/arch/arm/mach-iop32x/include/mach/io.h
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -21,7 +21,7 @@ extern void __iop3xx_iounmap(void __iomem *addr);
 #define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
 #define __mem_pci(a)		(a)
 
-#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
-#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
+#define __arch_ioremap	__iop3xx_ioremap
+#define __arch_iounmap	__iop3xx_iounmap
 
 #endif
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
index e99a7ed6d05..39e893e97c2 100644
--- a/arch/arm/mach-iop33x/include/mach/io.h
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -21,7 +21,7 @@ extern void __iop3xx_iounmap(void __iomem *addr);
 #define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
 #define __mem_pci(a)		(a)
 
-#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
-#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
+#define __arch_ioremap	__iop3xx_ioremap
+#define __arch_iounmap	__iop3xx_iounmap
 
 #endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
index fd9ef8e519f..a1749d0fd89 100644
--- a/arch/arm/mach-ixp23xx/include/mach/io.h
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -45,8 +45,8 @@ ixp23xx_iounmap(void __iomem *addr)
 	__iounmap(addr);
 }
 
-#define __arch_ioremap(a,s,f)	ixp23xx_ioremap(a,s,f)
-#define __arch_iounmap(a)	ixp23xx_iounmap(a)
+#define __arch_ioremap	ixp23xx_ioremap
+#define __arch_iounmap	ixp23xx_iounmap
 
 
 #endif
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 24498a932ba..a54b3db8036 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -513,4 +513,4 @@ int dma_set_coherent_mask(struct device *dev, u64 mask)
 
 EXPORT_SYMBOL(ixp4xx_pci_read);
 EXPORT_SYMBOL(ixp4xx_pci_write);
-
+EXPORT_SYMBOL(dma_set_coherent_mask);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 0bce09799d1..4dbfcbb9163 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -35,6 +35,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/irq.h>
+#include <asm/sched_clock.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -399,6 +400,23 @@ void __init ixp4xx_sys_init(void)
 }
 
 /*
+ * sched_clock()
+ */
+static DEFINE_CLOCK_DATA(cd);
+
+unsigned long long notrace sched_clock(void)
+{
+	u32 cyc = *IXP4XX_OSTS;
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace ixp4xx_update_sched_clock(void)
+{
+	u32 cyc = *IXP4XX_OSTS;
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
+/*
  * clocksource
  */
 static cycle_t ixp4xx_get_cycles(struct clocksource *cs)
@@ -411,7 +429,6 @@ static struct clocksource clocksource_ixp4xx = {
 	.rating		= 200,
 	.read		= ixp4xx_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift 		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -419,21 +436,9 @@ unsigned long ixp4xx_timer_freq = FREQ;
 EXPORT_SYMBOL(ixp4xx_timer_freq);
 static void __init ixp4xx_clocksource_init(void)
 {
-	clocksource_ixp4xx.mult =
-		clocksource_hz2mult(ixp4xx_timer_freq,
-				    clocksource_ixp4xx.shift);
-	clocksource_register(&clocksource_ixp4xx);
-}
-
-/*
- * sched_clock()
- */
-unsigned long long sched_clock(void)
-{
-	cycle_t cyc = ixp4xx_get_cycles(NULL);
-	struct clocksource *cs = &clocksource_ixp4xx;
+	init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq);
 
-	return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+	clocksource_register_hz(&clocksource_ixp4xx, ixp4xx_timer_freq);
 }
 
 /*
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index de274a1f19d..57b5410c31f 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -74,8 +74,8 @@ static inline void __indirect_iounmap(void __iomem *addr)
 		__iounmap(addr);
 }
 
-#define __arch_ioremap(a, s, f)		__indirect_ioremap(a, s, f)
-#define __arch_iounmap(a)		__indirect_iounmap(a)
+#define __arch_ioremap			__indirect_ioremap
+#define __arch_iounmap			__indirect_iounmap
 
 #define writeb(v, p)			__indirect_writeb(v, p)
 #define writew(v, p)			__indirect_writew(v, p)
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 34106335c72..7fc603b4689 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -45,18 +45,18 @@ config MACH_GURUPLUG
 	  Marvell GuruPlug Reference Board.
 
 config MACH_TS219
-	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
+	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
-	  devices.
+	  QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
+	  TS-219P+ Turbo NAS devices.
 
 config MACH_TS41X
-	bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
+	bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
-	  devices.
+	  QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
+	  NAS devices.
 
 config MACH_DOCKSTAR
 	bool "Seagate FreeAgent DockStar"
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 51ff23b72d3..3688123b5ad 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -854,10 +854,9 @@ int __init kirkwood_find_tclk(void)
 
 	kirkwood_pcie_id(&dev, &rev);
 
-	if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
-					rev == MV88F6281_REV_A1)) ||
-	    (dev == MV88F6282_DEV_ID))
-		return 200000000;
+	if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
+		if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
+			return 200000000;
 
 	return 166666667;
 }
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 4aa86e4a152..a31c9499ab3 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -225,5 +225,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
 	.init_machine	= d2net_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
index 44e8be04f25..1aaddc364f2 100644
--- a/arch/arm/mach-kirkwood/include/mach/io.h
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -42,8 +42,8 @@ __arch_iounmap(void __iomem *addr)
 		__iounmap(addr);
 }
 
-#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
-#define __arch_iounmap(a)	__arch_iounmap(a)
+#define __arch_ioremap		__arch_ioremap
+#define __arch_iounmap		__arch_iounmap
 #define __io(a)			__io(a)
 #define __mem_pci(a)		(a)
 
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.c b/arch/arm/mach-kirkwood/lacie_v2-common.c
index d3ea1b6c8a0..285edab776e 100644
--- a/arch/arm/mach-kirkwood/lacie_v2-common.c
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.c
@@ -111,17 +111,3 @@ void __init lacie_v2_hdd_power_init(int hdd_num)
 			pr_err("Failed to power up HDD%d\n", i + 1);
 	}
 }
-
-/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void lacie_v2_timer_init(void)
-{
-	kirkwood_tclk = 166666667;
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer lacie_v2_timer = {
-	.init = lacie_v2_timer_init,
-};
diff --git a/arch/arm/mach-kirkwood/lacie_v2-common.h b/arch/arm/mach-kirkwood/lacie_v2-common.h
index af521315b87..fc64f578536 100644
--- a/arch/arm/mach-kirkwood/lacie_v2-common.h
+++ b/arch/arm/mach-kirkwood/lacie_v2-common.h
@@ -13,6 +13,4 @@ void lacie_v2_register_flash(void);
 void lacie_v2_register_i2c_devices(void);
 void lacie_v2_hdd_power_init(int hdd_num);
 
-extern struct sys_timer lacie_v2_timer;
-
 #endif
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 065187d177c..27901f702fe 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -59,7 +59,7 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 	}
 	printk("\n");
 
-	while (*mpp_list) {
+	for ( ; *mpp_list; mpp_list++) {
 		unsigned int num = MPP_NUM(*mpp_list);
 		unsigned int sel = MPP_SEL(*mpp_list);
 		int shift, gpio_mode;
@@ -88,8 +88,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 		if (sel != 0)
 			gpio_mode = 0;
 		orion_gpio_set_valid(num, gpio_mode);
-
-		mpp_list++;
 	}
 
 	printk(KERN_DEBUG "  final MPP regs:");
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 5ea66f1f417..65ee21fd2f3 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -262,7 +262,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -272,7 +272,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -282,6 +282,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index a1b45d501ae..93afd3c8bfd 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -403,7 +403,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -413,6 +413,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 6710bd7773b..dc999c4c580 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -80,15 +80,19 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP11_UART0_RXD,
 	MPP13_UART1_TXD,	/* PIC controller */
 	MPP14_UART1_RXD,	/* PIC controller */
-	MPP15_GPIO,		/* USB Copy button */
-	MPP16_GPIO,		/* Reset button */
+	MPP15_GPIO,		/* USB Copy button (on devices with 88F6281) */
+	MPP16_GPIO,		/* Reset button (on devices with 88F6281) */
 	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP37_GPIO,		/* Reset button (on devices with 88F6282) */
+	MPP43_GPIO,		/* USB Copy button (on devices with 88F6282) */
 	MPP44_GPIO,		/* Board ID: 0: TS-11x, 1: TS-21x */
 	0
 };
 
 static void __init qnap_ts219_init(void)
 {
+	u32 dev, rev;
+
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
@@ -100,6 +104,14 @@ static void __init qnap_ts219_init(void)
 	qnap_tsx1x_register_flash();
 	kirkwood_i2c_init();
 	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
+
+	kirkwood_pcie_id(&dev, &rev);
+	if (dev == MV88F6282_DEV_ID) {
+		qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
+		qnap_ts219_buttons[1].gpio = 37; /* Reset button */
+		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+	}
+
 	kirkwood_ge00_init(&qnap_ts219_ge00_data);
 	kirkwood_sata_init(&qnap_ts219_sata_data);
 	kirkwood_ehci_init();
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index 8be09a0ce4a..9a44029915e 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -27,6 +27,10 @@
 #include "mpp.h"
 #include "tsx1x-common.h"
 
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
 #define QNAP_TS41X_JUMPER_JP1	45
 
 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
@@ -115,6 +119,8 @@ static unsigned int qnap_ts41x_mpp_config[] __initdata = {
 
 static void __init qnap_ts41x_init(void)
 {
+	u32 dev, rev;
+
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
@@ -126,8 +132,15 @@ static void __init qnap_ts41x_init(void)
 	qnap_tsx1x_register_flash();
 	kirkwood_i2c_init();
 	i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+
+	kirkwood_pcie_id(&dev, &rev);
+	if (dev == MV88F6282_DEV_ID) {
+		qnap_ts41x_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
+		qnap_ts41x_ge01_data.phy_addr = MV643XX_ETH_PHY_ADDR(1);
+	}
 	kirkwood_ge00_init(&qnap_ts41x_ge00_data);
 	kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+
 	kirkwood_sata_init(&qnap_ts41x_sata_data);
 	kirkwood_ehci_init();
 	platform_device_register(&qnap_ts41x_button_device);
@@ -140,8 +153,16 @@ static void __init qnap_ts41x_init(void)
 
 static int __init ts41x_pci_init(void)
 {
-	if (machine_is_ts41x())
+	if (machine_is_ts41x()) {
+		/*
+		 * Without this explicit reset, the PCIe SATA controller
+		 * (Marvell 88sx7042/sata_mv) is known to stop working
+		 * after a few minutes.
+		 */
+		orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+
 		kirkwood_pcie_init(KW_PCIE0);
+	}
 
    return 0;
 }
diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig
index fe0c82e30b2..f5c39a8c2b0 100644
--- a/arch/arm/mach-ks8695/Kconfig
+++ b/arch/arm/mach-ks8695/Kconfig
@@ -4,6 +4,7 @@ menu "Kendin/Micrel KS8695 Implementations"
 
 config MACH_KS8695
 	bool "KS8695 development board"
+	select MIGHT_HAVE_PCI
 	help
 	  Say 'Y' here if you want your kernel to run on the original
 	  Kendin-Micrel KS8695 development board.
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index ffa19aae6e0..bace9a681ad 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -35,17 +35,17 @@ extern struct bus_type platform_bus_type;
 					__phys_to_virt(x) : __bus_to_virt(x)); })
 #define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
 					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
-#define __arch_page_to_dma(dev, x)	\
-	({ dma_addr_t __dma = page_to_phys(page); \
+#define __arch_pfn_to_dma(dev, pfn)	\
+	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
 	   if (!is_lbus_device(dev)) \
 		__dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
 	   __dma; })
 
-#define __arch_dma_to_page(dev, x)	\
+#define __arch_dma_to_pfn(dev, x)	\
 	({ dma_addr_t __dma = x;				\
 	   if (!is_lbus_device(dev))				\
 		__dma += PHYS_OFFSET - KS8695_PCIMEM_PA;	\
-	   phys_to_page(__dma);					\
+	   __phys_to_pfn(__dma);				\
 	})
 
 #endif
diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c
index 32d63796430..da0e6498110 100644
--- a/arch/arm/mach-lpc32xx/clock.c
+++ b/arch/arm/mach-lpc32xx/clock.c
@@ -90,10 +90,9 @@
 #include <linux/clk.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
-#include <asm/clkdev.h>
-#include <mach/clkdev.h>
 #include <mach/platform.h>
 #include "clock.h"
 #include "common.h"
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
index 630dd4a74b2..6162ac308c2 100644
--- a/arch/arm/mach-lpc32xx/timer.c
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -38,7 +38,6 @@ static cycle_t lpc32xx_clksrc_read(struct clocksource *cs)
 
 static struct clocksource lpc32xx_clksrc = {
 	.name	= "lpc32xx_clksrc",
-	.shift	= 24,
 	.rating	= 300,
 	.read	= lpc32xx_clksrc_read,
 	.mask	= CLOCKSOURCE_MASK(32),
@@ -171,9 +170,7 @@ static void __init lpc32xx_timer_init(void)
 	__raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE));
 	__raw_writel(LCP32XX_TIMER_CNTR_TCR_EN,
 		LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE));
-	lpc32xx_clksrc.mult = clocksource_hz2mult(clkrate,
-		lpc32xx_clksrc.shift);
-	clocksource_register(&lpc32xx_clksrc);
+	clocksource_register_hz(&lpc32xx_clksrc, clkrate);
 }
 
 struct sys_timer lpc32xx_timer = {
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 0711d3b620a..67793a69027 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -37,25 +37,38 @@ config MACH_TTC_DKB
 	  Say 'Y' here if you want to support the Marvell PXA910-based
 	  TTC_DKB Development Board.
 
+config MACH_BROWNSTONE
+	bool "Marvell's Brownstone Development Platform"
+	depends on !CPU_MOHAWK
+	select CPU_MMP2
+	help
+	  Say 'Y' here if you want to support the Marvell MMP2-based
+	  Brown Development Platform.
+	  MMP2-based board can't be co-existed with PXA168-based &
+	  PXA910-based development board. Since MMP2 is compatible to
+	  ARMv7 architecture.
+
 config MACH_FLINT
 	bool "Marvell's Flint Development Platform"
+	depends on !CPU_MOHAWK
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-based
 	  Flint Development Platform.
 	  MMP2-based board can't be co-existed with PXA168-based &
 	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv6 architecture.
+	  ARMv7 architecture.
 
 config MACH_MARVELL_JASPER
 	bool "Marvell's Jasper Development Platform"
+	depends on !CPU_MOHAWK
 	select CPU_MMP2
 	help
 	  Say 'Y' here if you want to support the Marvell MMP2-base
 	  Jasper Development Platform.
 	  MMP2-based board can't be co-existed with PXA168-based &
 	  PXA910-based development board. Since MMP2 is compatible to
-	  ARMv6 architecture.
+	  ARMv7 architecture.
 
 config MACH_TETON_BGA
 	bool "Marvell's PXA168 Teton BGA Development Board"
@@ -80,8 +93,7 @@ config CPU_PXA910
 
 config CPU_MMP2
 	bool
-	select CPU_V6
-	select CPU_32v6K
+	select CPU_PJ4
 	help
-	  Select code specific to MMP2. MMP2 is ARMv6 compatible.
+	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
 endif
diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile
index 751cdbf733c..5c68382141a 100644
--- a/arch/arm/mach-mmp/Makefile
+++ b/arch/arm/mach-mmp/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_MACH_ZYLONITE2)	+= aspenite.o
 obj-$(CONFIG_MACH_AVENGERS_LITE)+= avengers_lite.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TTC_DKB)	+= ttc_dkb.o
+obj-$(CONFIG_MACH_BROWNSTONE)	+= brownstone.o
 obj-$(CONFIG_MACH_FLINT)	+= flint.o
 obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o
 obj-$(CONFIG_MACH_TETON_BGA)	+= teton_bga.o
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
new file mode 100644
index 00000000000..7bb78fd5a2a
--- /dev/null
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -0,0 +1,204 @@
+/*
+ *  linux/arch/arm/mach-mmp/brownstone.c
+ *
+ *  Support for the Marvell Brownstone Development Platform.
+ *
+ *  Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/max8649.h>
+#include <linux/regulator/fixed.h>
+#include <linux/mfd/max8925.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/addr-map.h>
+#include <mach/mfp-mmp2.h>
+#include <mach/mmp2.h>
+#include <mach/irqs.h>
+
+#include "common.h"
+
+#define BROWNSTONE_NR_IRQS	(IRQ_BOARD_START + 40)
+
+#define GPIO_5V_ENABLE		(89)
+
+static unsigned long brownstone_pin_config[] __initdata = {
+	/* UART1 */
+	GPIO29_UART1_RXD,
+	GPIO30_UART1_TXD,
+
+	/* UART3 */
+	GPIO51_UART3_RXD,
+	GPIO52_UART3_TXD,
+
+	/* DFI */
+	GPIO168_DFI_D0,
+	GPIO167_DFI_D1,
+	GPIO166_DFI_D2,
+	GPIO165_DFI_D3,
+	GPIO107_DFI_D4,
+	GPIO106_DFI_D5,
+	GPIO105_DFI_D6,
+	GPIO104_DFI_D7,
+	GPIO111_DFI_D8,
+	GPIO164_DFI_D9,
+	GPIO163_DFI_D10,
+	GPIO162_DFI_D11,
+	GPIO161_DFI_D12,
+	GPIO110_DFI_D13,
+	GPIO109_DFI_D14,
+	GPIO108_DFI_D15,
+	GPIO143_ND_nCS0,
+	GPIO144_ND_nCS1,
+	GPIO147_ND_nWE,
+	GPIO148_ND_nRE,
+	GPIO150_ND_ALE,
+	GPIO149_ND_CLE,
+	GPIO112_ND_RDY0,
+	GPIO160_ND_RDY1,
+
+	/* PMIC */
+	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
+
+	/* MMC0 */
+	GPIO131_MMC1_DAT3 | MFP_PULL_HIGH,
+	GPIO132_MMC1_DAT2 | MFP_PULL_HIGH,
+	GPIO133_MMC1_DAT1 | MFP_PULL_HIGH,
+	GPIO134_MMC1_DAT0 | MFP_PULL_HIGH,
+	GPIO136_MMC1_CMD | MFP_PULL_HIGH,
+	GPIO139_MMC1_CLK,
+	GPIO140_MMC1_CD | MFP_PULL_LOW,
+	GPIO141_MMC1_WP | MFP_PULL_LOW,
+
+	/* MMC1 */
+	GPIO37_MMC2_DAT3 | MFP_PULL_HIGH,
+	GPIO38_MMC2_DAT2 | MFP_PULL_HIGH,
+	GPIO39_MMC2_DAT1 | MFP_PULL_HIGH,
+	GPIO40_MMC2_DAT0 | MFP_PULL_HIGH,
+	GPIO41_MMC2_CMD | MFP_PULL_HIGH,
+	GPIO42_MMC2_CLK,
+
+	/* MMC2 */
+	GPIO165_MMC3_DAT7 | MFP_PULL_HIGH,
+	GPIO162_MMC3_DAT6 | MFP_PULL_HIGH,
+	GPIO166_MMC3_DAT5 | MFP_PULL_HIGH,
+	GPIO163_MMC3_DAT4 | MFP_PULL_HIGH,
+	GPIO167_MMC3_DAT3 | MFP_PULL_HIGH,
+	GPIO164_MMC3_DAT2 | MFP_PULL_HIGH,
+	GPIO168_MMC3_DAT1 | MFP_PULL_HIGH,
+	GPIO111_MMC3_DAT0 | MFP_PULL_HIGH,
+	GPIO112_MMC3_CMD | MFP_PULL_HIGH,
+	GPIO151_MMC3_CLK,
+
+	/* 5V regulator */
+	GPIO89_GPIO,
+};
+
+static struct regulator_consumer_supply max8649_supply[] = {
+	REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data max8649_init_data = {
+	.constraints	= {
+		.name		= "vcc_core range",
+		.min_uV		= 1150000,
+		.max_uV		= 1280000,
+		.always_on	= 1,
+		.boot_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8649_supply[0],
+};
+
+static struct max8649_platform_data brownstone_max8649_info = {
+	.mode		= 2,	/* VID1 = 1, VID0 = 0 */
+	.extclk		= 0,
+	.ramp_timing	= MAX8649_RAMP_32MV,
+	.regulator	= &max8649_init_data,
+};
+
+static struct regulator_consumer_supply brownstone_v_5vp_supplies[] = {
+	REGULATOR_SUPPLY("v_5vp", NULL),
+};
+
+static struct regulator_init_data brownstone_v_5vp_data = {
+	.constraints	= {
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(brownstone_v_5vp_supplies),
+	.consumer_supplies	= brownstone_v_5vp_supplies,
+};
+
+static struct fixed_voltage_config brownstone_v_5vp = {
+	.supply_name		= "v_5vp",
+	.microvolts		= 5000000,
+	.gpio			= GPIO_5V_ENABLE,
+	.enable_high		= 1,
+	.enabled_at_boot	= 1,
+	.init_data		= &brownstone_v_5vp_data,
+};
+
+static struct platform_device brownstone_v_5vp_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev = {
+		.platform_data = &brownstone_v_5vp,
+	},
+};
+
+static struct max8925_platform_data brownstone_max8925_info = {
+	.irq_base		= IRQ_BOARD_START,
+};
+
+static struct i2c_board_info brownstone_twsi1_info[] = {
+	[0] = {
+		.type		= "max8649",
+		.addr		= 0x60,
+		.platform_data	= &brownstone_max8649_info,
+	},
+	[1] = {
+		.type		= "max8925",
+		.addr		= 0x3c,
+		.irq		= IRQ_MMP2_PMIC,
+		.platform_data	= &brownstone_max8925_info,
+	},
+};
+
+static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
+	.max_speed	= 25000000,
+};
+
+static void __init brownstone_init(void)
+{
+	mfp_config(ARRAY_AND_SIZE(brownstone_pin_config));
+
+	/* on-chip devices */
+	mmp2_add_uart(1);
+	mmp2_add_uart(3);
+	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
+	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
+
+	/* enable 5v regulator */
+	platform_device_register(&brownstone_v_5vp_device);
+}
+
+MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
+	/* Maintainer: Haojian Zhuang <haojian.zhuang@marvell.com> */
+	.map_io		= mmp_map_io,
+	.nr_irqs	= BROWNSTONE_NR_IRQS,
+	.init_irq	= mmp2_init_irq,
+	.timer		= &mmp2_timer,
+	.init_machine	= brownstone_init,
+MACHINE_END
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index 016ae94691c..9b027d7491f 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -6,7 +6,7 @@
  *  published by the Free Software Foundation.
  */
 
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 struct clkops {
 	void			(*enable)(struct clk *);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index bdeb6db4d49..c4fd806b15b 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -47,7 +47,7 @@ static unsigned long flint_pin_config[] __initdata = {
 	GPIO113_SMC_RDY,
 
 	/*Ethernet*/
-	GPIO155_GPIO155,
+	GPIO155_GPIO,
 
 	/* DFI */
 	GPIO168_DFI_D0,
diff --git a/arch/arm/mach-mmp/include/mach/cputype.h b/arch/arm/mach-mmp/include/mach/cputype.h
index f43a68b213f..8a3b56dfd35 100644
--- a/arch/arm/mach-mmp/include/mach/cputype.h
+++ b/arch/arm/mach-mmp/include/mach/cputype.h
@@ -46,7 +46,8 @@ static inline int cpu_is_pxa910(void)
 #ifdef CONFIG_CPU_MMP2
 static inline int cpu_is_mmp2(void)
 {
-	return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
+}
 #else
 #define cpu_is_mmp2()	(0)
 #endif
diff --git a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
index 761c2dacc07..117e3036608 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-mmp2.h
@@ -9,175 +9,175 @@
 #define MFP_DRIVE_FAST		(0x8 << 13)
 
 /* GPIO */
-#define GPIO0_GPIO0		MFP_CFG(GPIO0, AF0)
-#define GPIO1_GPIO1		MFP_CFG(GPIO1, AF0)
-#define GPIO2_GPIO2		MFP_CFG(GPIO2, AF0)
-#define GPIO3_GPIO3		MFP_CFG(GPIO3, AF0)
-#define GPIO4_GPIO4		MFP_CFG(GPIO4, AF0)
-#define GPIO5_GPIO5		MFP_CFG(GPIO5, AF0)
-#define GPIO6_GPIO6		MFP_CFG(GPIO6, AF0)
-#define GPIO7_GPIO7		MFP_CFG(GPIO7, AF0)
-#define GPIO8_GPIO8		MFP_CFG(GPIO8, AF0)
-#define GPIO9_GPIO9		MFP_CFG(GPIO9, AF0)
-#define GPIO10_GPIO10		MFP_CFG(GPIO10, AF0)
-#define GPIO11_GPIO11		MFP_CFG(GPIO11, AF0)
-#define GPIO12_GPIO12		MFP_CFG(GPIO12, AF0)
-#define GPIO13_GPIO13		MFP_CFG(GPIO13, AF0)
-#define GPIO14_GPIO14		MFP_CFG(GPIO14, AF0)
-#define GPIO15_GPIO15		MFP_CFG(GPIO15, AF0)
-#define GPIO16_GPIO16		MFP_CFG(GPIO16, AF0)
-#define GPIO17_GPIO17		MFP_CFG(GPIO17, AF0)
-#define GPIO18_GPIO18		MFP_CFG(GPIO18, AF0)
-#define GPIO19_GPIO19		MFP_CFG(GPIO19, AF0)
-#define GPIO20_GPIO20		MFP_CFG(GPIO20, AF0)
-#define GPIO21_GPIO21		MFP_CFG(GPIO21, AF0)
-#define GPIO22_GPIO22		MFP_CFG(GPIO22, AF0)
-#define GPIO23_GPIO23		MFP_CFG(GPIO23, AF0)
-#define GPIO24_GPIO24		MFP_CFG(GPIO24, AF0)
-#define GPIO25_GPIO25		MFP_CFG(GPIO25, AF0)
-#define GPIO26_GPIO26		MFP_CFG(GPIO26, AF0)
-#define GPIO27_GPIO27		MFP_CFG(GPIO27, AF0)
-#define GPIO28_GPIO28		MFP_CFG(GPIO28, AF0)
-#define GPIO29_GPIO29		MFP_CFG(GPIO29, AF0)
-#define GPIO30_GPIO30		MFP_CFG(GPIO30, AF0)
-#define GPIO31_GPIO31		MFP_CFG(GPIO31, AF0)
-#define GPIO32_GPIO32		MFP_CFG(GPIO32, AF0)
-#define GPIO33_GPIO33		MFP_CFG(GPIO33, AF0)
-#define GPIO34_GPIO34		MFP_CFG(GPIO34, AF0)
-#define GPIO35_GPIO35		MFP_CFG(GPIO35, AF0)
-#define GPIO36_GPIO36		MFP_CFG(GPIO36, AF0)
-#define GPIO37_GPIO37		MFP_CFG(GPIO37, AF0)
-#define GPIO38_GPIO38		MFP_CFG(GPIO38, AF0)
-#define GPIO39_GPIO39		MFP_CFG(GPIO39, AF0)
-#define GPIO40_GPIO40		MFP_CFG(GPIO40, AF0)
-#define GPIO41_GPIO41		MFP_CFG(GPIO41, AF0)
-#define GPIO42_GPIO42		MFP_CFG(GPIO42, AF0)
-#define GPIO43_GPIO43		MFP_CFG(GPIO43, AF0)
-#define GPIO44_GPIO44		MFP_CFG(GPIO44, AF0)
-#define GPIO45_GPIO45		MFP_CFG(GPIO45, AF0)
-#define GPIO46_GPIO46		MFP_CFG(GPIO46, AF0)
-#define GPIO47_GPIO47		MFP_CFG(GPIO47, AF0)
-#define GPIO48_GPIO48		MFP_CFG(GPIO48, AF0)
-#define GPIO49_GPIO49		MFP_CFG(GPIO49, AF0)
-#define GPIO50_GPIO50		MFP_CFG(GPIO50, AF0)
-#define GPIO51_GPIO51		MFP_CFG(GPIO51, AF0)
-#define GPIO52_GPIO52		MFP_CFG(GPIO52, AF0)
-#define GPIO53_GPIO53		MFP_CFG(GPIO53, AF0)
-#define GPIO54_GPIO54		MFP_CFG(GPIO54, AF0)
-#define GPIO55_GPIO55		MFP_CFG(GPIO55, AF0)
-#define GPIO56_GPIO56		MFP_CFG(GPIO56, AF0)
-#define GPIO57_GPIO57		MFP_CFG(GPIO57, AF0)
-#define GPIO58_GPIO58		MFP_CFG(GPIO58, AF0)
-#define GPIO59_GPIO59		MFP_CFG(GPIO59, AF0)
-#define GPIO60_GPIO60		MFP_CFG(GPIO60, AF0)
-#define GPIO61_GPIO61		MFP_CFG(GPIO61, AF0)
-#define GPIO62_GPIO62		MFP_CFG(GPIO62, AF0)
-#define GPIO63_GPIO63		MFP_CFG(GPIO63, AF0)
-#define GPIO64_GPIO64		MFP_CFG(GPIO64, AF0)
-#define GPIO65_GPIO65		MFP_CFG(GPIO65, AF0)
-#define GPIO66_GPIO66		MFP_CFG(GPIO66, AF0)
-#define GPIO67_GPIO67		MFP_CFG(GPIO67, AF0)
-#define GPIO68_GPIO68		MFP_CFG(GPIO68, AF0)
-#define GPIO69_GPIO69		MFP_CFG(GPIO69, AF0)
-#define GPIO70_GPIO70		MFP_CFG(GPIO70, AF0)
-#define GPIO71_GPIO71		MFP_CFG(GPIO71, AF0)
-#define GPIO72_GPIO72		MFP_CFG(GPIO72, AF0)
-#define GPIO73_GPIO73		MFP_CFG(GPIO73, AF0)
-#define GPIO74_GPIO74		MFP_CFG(GPIO74, AF0)
-#define GPIO75_GPIO75		MFP_CFG(GPIO75, AF0)
-#define GPIO76_GPIO76		MFP_CFG(GPIO76, AF0)
-#define GPIO77_GPIO77		MFP_CFG(GPIO77, AF0)
-#define GPIO78_GPIO78		MFP_CFG(GPIO78, AF0)
-#define GPIO79_GPIO79		MFP_CFG(GPIO79, AF0)
-#define GPIO80_GPIO80		MFP_CFG(GPIO80, AF0)
-#define GPIO81_GPIO81		MFP_CFG(GPIO81, AF0)
-#define GPIO82_GPIO82		MFP_CFG(GPIO82, AF0)
-#define GPIO83_GPIO83		MFP_CFG(GPIO83, AF0)
-#define GPIO84_GPIO84		MFP_CFG(GPIO84, AF0)
-#define GPIO85_GPIO85		MFP_CFG(GPIO85, AF0)
-#define GPIO86_GPIO86		MFP_CFG(GPIO86, AF0)
-#define GPIO87_GPIO87		MFP_CFG(GPIO87, AF0)
-#define GPIO88_GPIO88		MFP_CFG(GPIO88, AF0)
-#define GPIO89_GPIO89		MFP_CFG(GPIO89, AF0)
-#define GPIO90_GPIO90		MFP_CFG(GPIO90, AF0)
-#define GPIO91_GPIO91		MFP_CFG(GPIO91, AF0)
-#define GPIO92_GPIO92		MFP_CFG(GPIO92, AF0)
-#define GPIO93_GPIO93		MFP_CFG(GPIO93, AF0)
-#define GPIO94_GPIO94		MFP_CFG(GPIO94, AF0)
-#define GPIO95_GPIO95		MFP_CFG(GPIO95, AF0)
-#define GPIO96_GPIO96		MFP_CFG(GPIO96, AF0)
-#define GPIO97_GPIO97		MFP_CFG(GPIO97, AF0)
-#define GPIO98_GPIO98		MFP_CFG(GPIO98, AF0)
-#define GPIO99_GPIO99		MFP_CFG(GPIO99, AF0)
-#define GPIO100_GPIO100		MFP_CFG(GPIO100, AF0)
-#define GPIO101_GPIO101		MFP_CFG(GPIO101, AF0)
-#define GPIO102_GPIO102		MFP_CFG(GPIO102, AF1)
-#define GPIO103_GPIO103		MFP_CFG(GPIO103, AF1)
-#define GPIO104_GPIO104		MFP_CFG(GPIO104, AF1)
-#define GPIO105_GPIO105		MFP_CFG(GPIO105, AF1)
-#define GPIO106_GPIO106		MFP_CFG(GPIO106, AF1)
-#define GPIO107_GPIO107		MFP_CFG(GPIO107, AF1)
-#define GPIO108_GPIO108		MFP_CFG(GPIO108, AF1)
-#define GPIO109_GPIO109		MFP_CFG(GPIO109, AF1)
-#define GPIO110_GPIO110		MFP_CFG(GPIO110, AF1)
-#define GPIO111_GPIO111		MFP_CFG(GPIO111, AF1)
-#define GPIO112_GPIO112		MFP_CFG(GPIO112, AF1)
-#define GPIO113_GPIO113		MFP_CFG(GPIO113, AF1)
-#define GPIO114_GPIO114		MFP_CFG(GPIO114, AF0)
-#define GPIO115_GPIO115		MFP_CFG(GPIO115, AF0)
-#define GPIO116_GPIO116		MFP_CFG(GPIO116, AF0)
-#define GPIO117_GPIO117		MFP_CFG(GPIO117, AF0)
-#define GPIO118_GPIO118		MFP_CFG(GPIO118, AF0)
-#define GPIO119_GPIO119		MFP_CFG(GPIO119, AF0)
-#define GPIO120_GPIO120		MFP_CFG(GPIO120, AF0)
-#define GPIO121_GPIO121		MFP_CFG(GPIO121, AF0)
-#define GPIO122_GPIO122		MFP_CFG(GPIO122, AF0)
-#define GPIO123_GPIO123		MFP_CFG(GPIO123, AF0)
-#define GPIO124_GPIO124		MFP_CFG(GPIO124, AF0)
-#define GPIO125_GPIO125		MFP_CFG(GPIO125, AF0)
-#define GPIO126_GPIO126		MFP_CFG(GPIO126, AF0)
-#define GPIO127_GPIO127		MFP_CFG(GPIO127, AF0)
-#define GPIO128_GPIO128		MFP_CFG(GPIO128, AF0)
-#define GPIO129_GPIO129		MFP_CFG(GPIO129, AF0)
-#define GPIO130_GPIO130		MFP_CFG(GPIO130, AF0)
-#define GPIO131_GPIO131		MFP_CFG(GPIO131, AF0)
-#define GPIO132_GPIO132		MFP_CFG(GPIO132, AF0)
-#define GPIO133_GPIO133		MFP_CFG(GPIO133, AF0)
-#define GPIO134_GPIO134		MFP_CFG(GPIO134, AF0)
-#define GPIO135_GPIO135		MFP_CFG(GPIO135, AF0)
-#define GPIO136_GPIO136		MFP_CFG(GPIO136, AF0)
-#define GPIO137_GPIO137		MFP_CFG(GPIO137, AF0)
-#define GPIO138_GPIO138		MFP_CFG(GPIO138, AF0)
-#define GPIO139_GPIO139		MFP_CFG(GPIO139, AF0)
-#define GPIO140_GPIO140		MFP_CFG(GPIO140, AF0)
-#define GPIO141_GPIO141		MFP_CFG(GPIO141, AF0)
-#define GPIO142_GPIO142		MFP_CFG(GPIO142, AF1)
-#define GPIO143_GPIO143		MFP_CFG(GPIO143, AF1)
-#define GPIO144_GPIO144		MFP_CFG(GPIO144, AF1)
-#define GPIO145_GPIO145		MFP_CFG(GPIO145, AF1)
-#define GPIO146_GPIO146		MFP_CFG(GPIO146, AF1)
-#define GPIO147_GPIO147		MFP_CFG(GPIO147, AF1)
-#define GPIO148_GPIO148		MFP_CFG(GPIO148, AF1)
-#define GPIO149_GPIO149		MFP_CFG(GPIO149, AF1)
-#define GPIO150_GPIO150		MFP_CFG(GPIO150, AF1)
-#define GPIO151_GPIO151		MFP_CFG(GPIO151, AF1)
-#define GPIO152_GPIO152		MFP_CFG(GPIO152, AF1)
-#define GPIO153_GPIO153		MFP_CFG(GPIO153, AF1)
-#define GPIO154_GPIO154		MFP_CFG(GPIO154, AF1)
-#define GPIO155_GPIO155		MFP_CFG(GPIO155, AF1)
-#define GPIO156_GPIO156		MFP_CFG(GPIO156, AF1)
-#define GPIO157_GPIO157		MFP_CFG(GPIO157, AF1)
-#define GPIO158_GPIO158		MFP_CFG(GPIO158, AF1)
-#define GPIO159_GPIO159		MFP_CFG(GPIO159, AF1)
-#define GPIO160_GPIO160		MFP_CFG(GPIO160, AF1)
-#define GPIO161_GPIO161		MFP_CFG(GPIO161, AF1)
-#define GPIO162_GPIO162		MFP_CFG(GPIO162, AF1)
-#define GPIO163_GPIO163		MFP_CFG(GPIO163, AF1)
-#define GPIO164_GPIO164		MFP_CFG(GPIO164, AF1)
-#define GPIO165_GPIO165		MFP_CFG(GPIO165, AF1)
-#define GPIO166_GPIO166		MFP_CFG(GPIO166, AF1)
-#define GPIO167_GPIO167		MFP_CFG(GPIO167, AF1)
-#define GPIO168_GPIO168		MFP_CFG(GPIO168, AF1)
+#define GPIO0_GPIO	MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO	MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO	MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO	MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO	MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO	MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO	MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO	MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO	MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO	MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO	MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO	MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO	MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO	MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO	MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO	MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO	MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO	MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO	MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO	MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO	MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO	MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO	MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO	MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO	MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO	MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO	MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO	MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO	MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO	MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO	MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO	MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO	MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO	MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO	MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO	MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO	MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO	MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO	MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO	MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO	MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO	MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO	MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO	MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO	MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO	MFP_CFG(GPIO45, AF0)
+#define GPIO46_GPIO	MFP_CFG(GPIO46, AF0)
+#define GPIO47_GPIO	MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO	MFP_CFG(GPIO48, AF0)
+#define GPIO49_GPIO	MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO	MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO	MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO	MFP_CFG(GPIO52, AF0)
+#define GPIO53_GPIO	MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO	MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO	MFP_CFG(GPIO55, AF0)
+#define GPIO56_GPIO	MFP_CFG(GPIO56, AF0)
+#define GPIO57_GPIO	MFP_CFG(GPIO57, AF0)
+#define GPIO58_GPIO	MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO	MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO	MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO	MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO	MFP_CFG(GPIO62, AF0)
+#define GPIO63_GPIO	MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO	MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO	MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO	MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO	MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO	MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO	MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO	MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO	MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO	MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO	MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO	MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO	MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO	MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO	MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO	MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO	MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO	MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO	MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO	MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO	MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO	MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO	MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO	MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO	MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO	MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO	MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO	MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO	MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO	MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO	MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO	MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO	MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO	MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO	MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO	MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO	MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO	MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO	MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO	MFP_CFG(GPIO102, AF1)
+#define GPIO103_GPIO	MFP_CFG(GPIO103, AF1)
+#define GPIO104_GPIO	MFP_CFG(GPIO104, AF1)
+#define GPIO105_GPIO	MFP_CFG(GPIO105, AF1)
+#define GPIO106_GPIO	MFP_CFG(GPIO106, AF1)
+#define GPIO107_GPIO	MFP_CFG(GPIO107, AF1)
+#define GPIO108_GPIO	MFP_CFG(GPIO108, AF1)
+#define GPIO109_GPIO	MFP_CFG(GPIO109, AF1)
+#define GPIO110_GPIO	MFP_CFG(GPIO110, AF1)
+#define GPIO111_GPIO	MFP_CFG(GPIO111, AF1)
+#define GPIO112_GPIO	MFP_CFG(GPIO112, AF1)
+#define GPIO113_GPIO	MFP_CFG(GPIO113, AF1)
+#define GPIO114_GPIO	MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO	MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO	MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO	MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO	MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO	MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO	MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO	MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO	MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO	MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO	MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO	MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO	MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO	MFP_CFG(GPIO127, AF0)
+#define GPIO128_GPIO	MFP_CFG(GPIO128, AF0)
+#define GPIO129_GPIO	MFP_CFG(GPIO129, AF0)
+#define GPIO130_GPIO	MFP_CFG(GPIO130, AF0)
+#define GPIO131_GPIO	MFP_CFG(GPIO131, AF0)
+#define GPIO132_GPIO	MFP_CFG(GPIO132, AF0)
+#define GPIO133_GPIO	MFP_CFG(GPIO133, AF0)
+#define GPIO134_GPIO	MFP_CFG(GPIO134, AF0)
+#define GPIO135_GPIO	MFP_CFG(GPIO135, AF0)
+#define GPIO136_GPIO	MFP_CFG(GPIO136, AF0)
+#define GPIO137_GPIO	MFP_CFG(GPIO137, AF0)
+#define GPIO138_GPIO	MFP_CFG(GPIO138, AF0)
+#define GPIO139_GPIO	MFP_CFG(GPIO139, AF0)
+#define GPIO140_GPIO	MFP_CFG(GPIO140, AF0)
+#define GPIO141_GPIO	MFP_CFG(GPIO141, AF0)
+#define GPIO142_GPIO	MFP_CFG(GPIO142, AF1)
+#define GPIO143_GPIO	MFP_CFG(GPIO143, AF1)
+#define GPIO144_GPIO	MFP_CFG(GPIO144, AF1)
+#define GPIO145_GPIO	MFP_CFG(GPIO145, AF1)
+#define GPIO146_GPIO	MFP_CFG(GPIO146, AF1)
+#define GPIO147_GPIO	MFP_CFG(GPIO147, AF1)
+#define GPIO148_GPIO	MFP_CFG(GPIO148, AF1)
+#define GPIO149_GPIO	MFP_CFG(GPIO149, AF1)
+#define GPIO150_GPIO	MFP_CFG(GPIO150, AF1)
+#define GPIO151_GPIO	MFP_CFG(GPIO151, AF1)
+#define GPIO152_GPIO	MFP_CFG(GPIO152, AF1)
+#define GPIO153_GPIO	MFP_CFG(GPIO153, AF1)
+#define GPIO154_GPIO	MFP_CFG(GPIO154, AF1)
+#define GPIO155_GPIO	MFP_CFG(GPIO155, AF1)
+#define GPIO156_GPIO	MFP_CFG(GPIO156, AF1)
+#define GPIO157_GPIO	MFP_CFG(GPIO157, AF1)
+#define GPIO158_GPIO	MFP_CFG(GPIO158, AF1)
+#define GPIO159_GPIO	MFP_CFG(GPIO159, AF1)
+#define GPIO160_GPIO	MFP_CFG(GPIO160, AF1)
+#define GPIO161_GPIO	MFP_CFG(GPIO161, AF1)
+#define GPIO162_GPIO	MFP_CFG(GPIO162, AF1)
+#define GPIO163_GPIO	MFP_CFG(GPIO163, AF1)
+#define GPIO164_GPIO	MFP_CFG(GPIO164, AF1)
+#define GPIO165_GPIO	MFP_CFG(GPIO165, AF1)
+#define GPIO166_GPIO	MFP_CFG(GPIO166, AF1)
+#define GPIO167_GPIO	MFP_CFG(GPIO167, AF1)
+#define GPIO168_GPIO	MFP_CFG(GPIO168, AF1)
 
 /* DFI */
 #define GPIO108_DFI_D15		MFP_CFG(GPIO108, AF0)
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index dbba6e8a60c..4aec493640b 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -1,6 +1,8 @@
 #ifndef __ASM_MACH_MMP2_H
 #define __ASM_MACH_MMP2_H
 
+#include <plat/sdhci.h>
+
 struct sys_timer;
 
 extern struct sys_timer mmp2_timer;
@@ -22,6 +24,10 @@ extern struct pxa_device_desc mmp2_device_twsi3;
 extern struct pxa_device_desc mmp2_device_twsi4;
 extern struct pxa_device_desc mmp2_device_twsi5;
 extern struct pxa_device_desc mmp2_device_twsi6;
+extern struct pxa_device_desc mmp2_device_sdh0;
+extern struct pxa_device_desc mmp2_device_sdh1;
+extern struct pxa_device_desc mmp2_device_sdh2;
+extern struct pxa_device_desc mmp2_device_sdh3;
 
 static inline int mmp2_add_uart(int id)
 {
@@ -63,5 +69,21 @@ static inline int mmp2_add_twsi(int id, struct i2c_pxa_platform_data *data,
 	return pxa_register_device(d, data, sizeof(*data));
 }
 
+static inline int mmp2_add_sdhost(int id, struct sdhci_pxa_platdata *data)
+{
+	struct pxa_device_desc *d = NULL;
+
+	switch (id) {
+	case 0: d = &mmp2_device_sdh0; break;
+	case 1: d = &mmp2_device_sdh1; break;
+	case 2: d = &mmp2_device_sdh2; break;
+	case 3: d = &mmp2_device_sdh3; break;
+	default:
+		return -EINVAL;
+	}
+
+	return pxa_register_device(d, data, sizeof(*data));
+}
+
 #endif /* __ASM_MACH_MMP2_H */
 
diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h
index ac4702357a6..f7011ef70bf 100644
--- a/arch/arm/mach-mmp/include/mach/regs-apmu.h
+++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h
@@ -27,6 +27,8 @@
 #define APMU_DMA	APMU_REG(0x064)
 #define APMU_GEU	APMU_REG(0x068)
 #define APMU_BUS	APMU_REG(0x06c)
+#define APMU_SDH2	APMU_REG(0x0e8)
+#define APMU_SDH3	APMU_REG(0x0ec)
 
 #define APMU_FNCLK_EN	(1 << 4)
 #define APMU_AXICLK_EN	(1 << 3)
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 2a684fa5077..24172a0aad5 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -67,6 +67,36 @@ static unsigned long jasper_pin_config[] __initdata = {
 
 	/* PMIC */
 	PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,
+
+	/* MMC1 */
+	GPIO131_MMC1_DAT3,
+	GPIO132_MMC1_DAT2,
+	GPIO133_MMC1_DAT1,
+	GPIO134_MMC1_DAT0,
+	GPIO136_MMC1_CMD,
+	GPIO139_MMC1_CLK,
+	GPIO140_MMC1_CD,
+	GPIO141_MMC1_WP,
+
+	/* MMC2 */
+	GPIO37_MMC2_DAT3,
+	GPIO38_MMC2_DAT2,
+	GPIO39_MMC2_DAT1,
+	GPIO40_MMC2_DAT0,
+	GPIO41_MMC2_CMD,
+	GPIO42_MMC2_CLK,
+
+	/* MMC3 */
+	GPIO165_MMC3_DAT7,
+	GPIO162_MMC3_DAT6,
+	GPIO166_MMC3_DAT5,
+	GPIO163_MMC3_DAT4,
+	GPIO167_MMC3_DAT3,
+	GPIO164_MMC3_DAT2,
+	GPIO168_MMC3_DAT1,
+	GPIO111_MMC3_DAT0,
+	GPIO112_MMC3_CMD,
+	GPIO151_MMC3_CLK,
 };
 
 static struct regulator_consumer_supply max8649_supply[] = {
@@ -123,6 +153,10 @@ static struct i2c_board_info jasper_twsi1_info[] = {
 	},
 };
 
+static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
+	.max_speed	= 25000000,
+};
+
 static void __init jasper_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(jasper_pin_config));
@@ -131,6 +165,7 @@ static void __init jasper_init(void)
 	mmp2_add_uart(1);
 	mmp2_add_uart(3);
 	mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
+	mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
 
 	regulator_has_full_constraints();
 }
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index daf3993349f..8e6c3ac7f7c 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -115,6 +115,29 @@ void __init mmp2_init_irq(void)
 	mmp2_init_gpio();
 }
 
+static void sdhc_clk_enable(struct clk *clk)
+{
+	uint32_t clk_rst;
+
+	clk_rst  =  __raw_readl(clk->clk_rst);
+	clk_rst |= clk->enable_val;
+	__raw_writel(clk_rst, clk->clk_rst);
+}
+
+static void sdhc_clk_disable(struct clk *clk)
+{
+	uint32_t clk_rst;
+
+	clk_rst  =  __raw_readl(clk->clk_rst);
+	clk_rst &= ~clk->enable_val;
+	__raw_writel(clk_rst, clk->clk_rst);
+}
+
+struct clkops sdhc_clk_ops = {
+	.enable		= sdhc_clk_enable,
+	.disable	= sdhc_clk_disable,
+};
+
 /* APB peripheral clocks */
 static APBC_CLK(uart1, MMP2_UART1, 1, 26000000);
 static APBC_CLK(uart2, MMP2_UART2, 1, 26000000);
@@ -126,9 +149,12 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000);
 static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
 static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
 static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
 
 static APMU_CLK(nand, NAND, 0xbf, 100000000);
+static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh1, SDH1, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh2, SDH2, 0x1b, 200000000, &sdhc_clk_ops);
+static APMU_CLK_OPS(sdh3, SDH3, 0x1b, 200000000, &sdhc_clk_ops);
 
 static struct clk_lookup mmp2_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -142,6 +168,10 @@ static struct clk_lookup mmp2_clkregs[] = {
 	INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
 	INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_sdh0, "sdhci-pxa.0", "PXA-SDHCLK"),
+	INIT_CLKREG(&clk_sdh1, "sdhci-pxa.1", "PXA-SDHCLK"),
+	INIT_CLKREG(&clk_sdh2, "sdhci-pxa.2", "PXA-SDHCLK"),
+	INIT_CLKREG(&clk_sdh3, "sdhci-pxa.3", "PXA-SDHCLK"),
 };
 
 static int __init mmp2_init(void)
@@ -192,4 +222,8 @@ MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70);
 MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70);
 MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70);
 MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29);
+MMP2_DEVICE(sdh0, "sdhci-pxa", 0, MMC, 0xd4280000, 0x120);
+MMP2_DEVICE(sdh1, "sdhci-pxa", 1, MMC2, 0xd4280800, 0x120);
+MMP2_DEVICE(sdh2, "sdhci-pxa", 2, MMC3, 0xd4281000, 0x120);
+MMP2_DEVICE(sdh3, "sdhci-pxa", 3, MMC4, 0xd4281800, 0x120);
 
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 46f2d69bef3..8f92ccd26ed 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -111,6 +111,7 @@ static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
 static APMU_CLK(nand, NAND, 0x01db, 208000000);
+static APMU_CLK(u2o, USB, 0x1b, 480000000);
 
 /* device and clock bindings */
 static struct clk_lookup pxa910_clkregs[] = {
@@ -123,6 +124,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
 	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
 };
 
 static int __init pxa910_init(void)
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 66528193f93..aeb9ae23e6c 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -26,8 +26,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/sched.h>
-#include <linux/cnt32_to_63.h>
 
+#include <asm/sched_clock.h>
 #include <mach/addr-map.h>
 #include <mach/regs-timers.h>
 #include <mach/regs-apbc.h>
@@ -42,23 +42,7 @@
 #define MAX_DELTA		(0xfffffffe)
 #define MIN_DELTA		(16)
 
-#define TCR2NS_SCALE_FACTOR	10
-
-static unsigned long tcr2ns_scale;
-
-static void __init set_tcr2ns_scale(unsigned long tcr_rate)
-{
-	unsigned long long v = 1000000000ULL << TCR2NS_SCALE_FACTOR;
-	do_div(v, tcr_rate);
-	tcr2ns_scale = v;
-	/*
-	 * We want an even value to automatically clear the top bit
-	 * returned by cnt32_to_63() without an additional run time
-	 * instruction. So if the LSB is 1 then round it up.
-	 */
-	if (tcr2ns_scale & 1)
-		tcr2ns_scale++;
-}
+static DEFINE_CLOCK_DATA(cd);
 
 /*
  * FIXME: the timer needs some delay to stablize the counter capture
@@ -75,10 +59,16 @@ static inline uint32_t timer_read(void)
 	return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
 }
 
-unsigned long long sched_clock(void)
+unsigned long long notrace sched_clock(void)
 {
-	unsigned long long v = cnt32_to_63(timer_read());
-	return (v * tcr2ns_scale) >> TCR2NS_SCALE_FACTOR;
+	u32 cyc = timer_read();
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace mmp_update_sched_clock(void)
+{
+	u32 cyc = timer_read();
+	update_sched_clock(&cd, cyc, (u32)~0);
 }
 
 static irqreturn_t timer_interrupt(int irq, void *dev_id)
@@ -146,7 +136,6 @@ static cycle_t clksrc_read(struct clocksource *cs)
 
 static struct clocksource cksrc = {
 	.name		= "clocksource",
-	.shift		= 20,
 	.rating		= 200,
 	.read		= clksrc_read,
 	.mask		= CLOCKSOURCE_MASK(32),
@@ -186,17 +175,15 @@ void __init timer_init(int irq)
 {
 	timer_config();
 
-	set_tcr2ns_scale(CLOCK_TICK_RATE);
+	init_sched_clock(&cd, mmp_update_sched_clock, 32, CLOCK_TICK_RATE);
 
 	ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
 	ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
 	ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
 	ckevt.cpumask = cpumask_of(0);
 
-	cksrc.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc.shift);
-
 	setup_irq(irq, &timer_irq);
 
-	clocksource_register(&cksrc);
+	clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
 	clockevents_register_device(&ckevt);
 }
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index dbbcfeb919d..fae931ac2e5 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -44,11 +44,14 @@ config ARCH_MSM8X60
 	select CPU_V7
 	select MSM_V2_TLMM
 	select MSM_GPIOMUX
+	select IOMMU_API
 
 endchoice
 
 config MSM_SOC_REV_A
 	bool
+config  ARCH_MSM_SCORPIONMP
+	bool
 
 config  ARCH_MSM_ARM11
 	bool
@@ -122,6 +125,10 @@ config MACH_MSM8X60_FFA
 
 endmenu
 
+config IOMMU_PGTABLES_L2
+	def_bool y
+	depends on ARCH_MSM8X60 && MMU && SMP && CPU_DCACHE_DISABLE=n
+
 config MSM_DEBUG_UART
 	int
 	default 1 if MSM_DEBUG_UART1
@@ -162,4 +169,7 @@ config MSM_GPIOMUX
 
 config MSM_V2_TLMM
 	bool
+
+config IOMMU_API
+	bool
 endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index b5a7b07a44f..59646bbd619 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
 obj-$(CONFIG_MSM_SMD) += last_radio_log.o
 
 obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
+obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
 obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
 obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
@@ -28,6 +29,8 @@ obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o
 obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-7x30.o gpiomux-v1.o gpiomux.o
 obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o
 obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o
-ifndef CONFIG_MSM_V2_TLMM
+ifdef CONFIG_MSM_V2_TLMM
+obj-y	+= gpio-v2.o
+else
 obj-y	+= gpio.o
 endif
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 05241df3f9b..6f3b9735e97 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -22,6 +22,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/usb/msm_hsusb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,11 +40,26 @@
 
 extern struct sys_timer msm_timer;
 
+static int hsusb_phy_init_seq[] = {
+	0x30, 0x32,	/* Enable and set Pre-Emphasis Depth to 20% */
+	0x02, 0x36,	/* Disable CDR Auto Reset feature */
+	-1
+};
+
+static struct msm_otg_platform_data msm_otg_pdata = {
+	.phy_init_seq		= hsusb_phy_init_seq,
+	.mode                   = USB_PERIPHERAL,
+	.otg_control		= OTG_PHY_CONTROL,
+};
+
 static struct platform_device *devices[] __initdata = {
 #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER)
         &msm_device_uart2,
 #endif
 	&msm_device_smd,
+	&msm_device_otg,
+	&msm_device_hsusb,
+	&msm_device_hsusb_host,
 };
 
 static void __init msm7x30_init_irq(void)
@@ -53,6 +69,10 @@ static void __init msm7x30_init_irq(void)
 
 static void __init msm7x30_init(void)
 {
+	msm_device_otg.dev.platform_data = &msm_otg_pdata;
+	msm_device_hsusb.dev.parent = &msm_device_otg.dev;
+	msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 7486a681cc7..9b5eb2b4ae1 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -28,8 +28,6 @@
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 
-void __iomem *gic_cpu_base_addr;
-
 unsigned long clk_get_max_axi_khz(void)
 {
 	return 0;
@@ -44,9 +42,8 @@ static void __init msm8x60_init_irq(void)
 {
 	unsigned int i;
 
-	gic_dist_init(0, MSM_QGIC_DIST_BASE, GIC_PPI_START);
-	gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE;
-	gic_cpu_init(0, MSM_QGIC_CPU_BASE);
+	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
+		 (void *)MSM_QGIC_CPU_BASE);
 
 	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
 	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index ed2af4ad97e..2e8391307f5 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -20,6 +20,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/usb/msm_hsusb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -74,9 +75,24 @@ static int __init msm_init_smc91x(void)
 }
 module_init(msm_init_smc91x);
 
+static int hsusb_phy_init_seq[] = {
+	0x08, 0x31,	/* Increase HS Driver Amplitude */
+	0x20, 0x32,	/* Enable and set Pre-Emphasis Depth to 10% */
+	-1
+};
+
+static struct msm_otg_platform_data msm_otg_pdata = {
+	.phy_init_seq		= hsusb_phy_init_seq,
+	.mode                   = USB_PERIPHERAL,
+	.otg_control		= OTG_PHY_CONTROL,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&msm_device_uart3,
 	&msm_device_smd,
+	&msm_device_otg,
+	&msm_device_hsusb,
+	&msm_device_hsusb_host,
 };
 
 static void __init qsd8x50_map_io(void)
@@ -93,6 +109,9 @@ static void __init qsd8x50_init_irq(void)
 
 static void __init qsd8x50_init(void)
 {
+	msm_device_otg.dev.platform_data = &msm_otg_pdata;
+	msm_device_hsusb.dev.parent = &msm_device_otg.dev;
+	msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-msm/board-trout-gpio.c b/arch/arm/mach-msm/board-trout-gpio.c
index c50f3afc313..f8c09ef6666 100644
--- a/arch/arm/mach-msm/board-trout-gpio.c
+++ b/arch/arm/mach-msm/board-trout-gpio.c
@@ -72,6 +72,13 @@ static int msm_gpiolib_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
+static int trout_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct msm_gpio_chip *msm_gpio = to_msm_gpio_chip(chip);
+
+	return TROUT_GPIO_TO_INT(offset + chip->base);
+}
+
 #define TROUT_GPIO_BANK(name, reg_num, base_gpio, shadow_val)		\
 	{								\
 		.chip = {						\
@@ -80,6 +87,7 @@ static int msm_gpiolib_direction_output(struct gpio_chip *chip,
 			.direction_output = msm_gpiolib_direction_output, \
 			.get		  = msm_gpiolib_get,		\
 			.set		  = msm_gpiolib_set,		\
+			.to_irq		  = trout_gpio_to_irq,		\
 			.base		  = base_gpio,			\
 			.ngpio		  = 8,				\
 		},							\
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
new file mode 100644
index 00000000000..729bb49a44c
--- /dev/null
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -0,0 +1,297 @@
+/* linux/arch/arm/mach-msm/board-trout-mddi.c
+** Author: Brian Swetland <swetland@google.com>
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/leds.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/mach-types.h>
+
+#include <mach/msm_fb.h>
+#include <mach/vreg.h>
+
+#include "board-trout.h"
+#include "proc_comm.h"
+#include "devices.h"
+
+#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
+
+#define MDDI_CLIENT_CORE_BASE  0x108000
+#define LCD_CONTROL_BLOCK_BASE 0x110000
+#define SPI_BLOCK_BASE         0x120000
+#define I2C_BLOCK_BASE         0x130000
+#define PWM_BLOCK_BASE         0x140000
+#define GPIO_BLOCK_BASE        0x150000
+#define SYSTEM_BLOCK1_BASE     0x160000
+#define SYSTEM_BLOCK2_BASE     0x170000
+
+
+#define	DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
+#define	SYSCLKENA   (MDDI_CLIENT_CORE_BASE|0x2C)
+#define	PWM0OFF	      (PWM_BLOCK_BASE|0x1C)
+
+#define V_VDDE2E_VDD2_GPIO 0
+#define MDDI_RST_N 82
+
+#define	MDDICAP0    (MDDI_CLIENT_CORE_BASE|0x00)
+#define	MDDICAP1    (MDDI_CLIENT_CORE_BASE|0x04)
+#define	MDDICAP2    (MDDI_CLIENT_CORE_BASE|0x08)
+#define	MDDICAP3    (MDDI_CLIENT_CORE_BASE|0x0C)
+#define	MDCAPCHG    (MDDI_CLIENT_CORE_BASE|0x10)
+#define	MDCRCERC    (MDDI_CLIENT_CORE_BASE|0x14)
+#define	TTBUSSEL    (MDDI_CLIENT_CORE_BASE|0x18)
+#define	DPSET0      (MDDI_CLIENT_CORE_BASE|0x1C)
+#define	DPSET1      (MDDI_CLIENT_CORE_BASE|0x20)
+#define	DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
+#define	DPRUN       (MDDI_CLIENT_CORE_BASE|0x28)
+#define	SYSCKENA    (MDDI_CLIENT_CORE_BASE|0x2C)
+#define	TESTMODE    (MDDI_CLIENT_CORE_BASE|0x30)
+#define	FIFOMONI    (MDDI_CLIENT_CORE_BASE|0x34)
+#define	INTMONI     (MDDI_CLIENT_CORE_BASE|0x38)
+#define	MDIOBIST    (MDDI_CLIENT_CORE_BASE|0x3C)
+#define	MDIOPSET    (MDDI_CLIENT_CORE_BASE|0x40)
+#define	BITMAP0     (MDDI_CLIENT_CORE_BASE|0x44)
+#define	BITMAP1     (MDDI_CLIENT_CORE_BASE|0x48)
+#define	BITMAP2     (MDDI_CLIENT_CORE_BASE|0x4C)
+#define	BITMAP3     (MDDI_CLIENT_CORE_BASE|0x50)
+#define	BITMAP4     (MDDI_CLIENT_CORE_BASE|0x54)
+
+#define	SRST        (LCD_CONTROL_BLOCK_BASE|0x00)
+#define	PORT_ENB    (LCD_CONTROL_BLOCK_BASE|0x04)
+#define	START       (LCD_CONTROL_BLOCK_BASE|0x08)
+#define	PORT        (LCD_CONTROL_BLOCK_BASE|0x0C)
+#define	CMN         (LCD_CONTROL_BLOCK_BASE|0x10)
+#define	GAMMA       (LCD_CONTROL_BLOCK_BASE|0x14)
+#define	INTFLG      (LCD_CONTROL_BLOCK_BASE|0x18)
+#define	INTMSK      (LCD_CONTROL_BLOCK_BASE|0x1C)
+#define	MPLFBUF     (LCD_CONTROL_BLOCK_BASE|0x20)
+#define	HDE_LEFT    (LCD_CONTROL_BLOCK_BASE|0x24)
+#define	VDE_TOP     (LCD_CONTROL_BLOCK_BASE|0x28)
+#define	PXL         (LCD_CONTROL_BLOCK_BASE|0x30)
+#define	HCYCLE      (LCD_CONTROL_BLOCK_BASE|0x34)
+#define	HSW         (LCD_CONTROL_BLOCK_BASE|0x38)
+#define	HDE_START   (LCD_CONTROL_BLOCK_BASE|0x3C)
+#define	HDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x40)
+#define	VCYCLE      (LCD_CONTROL_BLOCK_BASE|0x44)
+#define	VSW         (LCD_CONTROL_BLOCK_BASE|0x48)
+#define	VDE_START   (LCD_CONTROL_BLOCK_BASE|0x4C)
+#define	VDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x50)
+#define	WAKEUP      (LCD_CONTROL_BLOCK_BASE|0x54)
+#define	WSYN_DLY    (LCD_CONTROL_BLOCK_BASE|0x58)
+#define	REGENB      (LCD_CONTROL_BLOCK_BASE|0x5C)
+#define	VSYNIF      (LCD_CONTROL_BLOCK_BASE|0x60)
+#define	WRSTB       (LCD_CONTROL_BLOCK_BASE|0x64)
+#define	RDSTB       (LCD_CONTROL_BLOCK_BASE|0x68)
+#define	ASY_DATA    (LCD_CONTROL_BLOCK_BASE|0x6C)
+#define	ASY_DATB    (LCD_CONTROL_BLOCK_BASE|0x70)
+#define	ASY_DATC    (LCD_CONTROL_BLOCK_BASE|0x74)
+#define	ASY_DATD    (LCD_CONTROL_BLOCK_BASE|0x78)
+#define	ASY_DATE    (LCD_CONTROL_BLOCK_BASE|0x7C)
+#define	ASY_DATF    (LCD_CONTROL_BLOCK_BASE|0x80)
+#define	ASY_DATG    (LCD_CONTROL_BLOCK_BASE|0x84)
+#define	ASY_DATH    (LCD_CONTROL_BLOCK_BASE|0x88)
+#define	ASY_CMDSET  (LCD_CONTROL_BLOCK_BASE|0x8C)
+
+#define	SSICTL      (SPI_BLOCK_BASE|0x00)
+#define	SSITIME     (SPI_BLOCK_BASE|0x04)
+#define	SSITX       (SPI_BLOCK_BASE|0x08)
+#define	SSIRX       (SPI_BLOCK_BASE|0x0C)
+#define	SSIINTC     (SPI_BLOCK_BASE|0x10)
+#define	SSIINTS     (SPI_BLOCK_BASE|0x14)
+#define	SSIDBG1     (SPI_BLOCK_BASE|0x18)
+#define	SSIDBG2     (SPI_BLOCK_BASE|0x1C)
+#define	SSIID       (SPI_BLOCK_BASE|0x20)
+
+#define	WKREQ       (SYSTEM_BLOCK1_BASE|0x00)
+#define	CLKENB      (SYSTEM_BLOCK1_BASE|0x04)
+#define	DRAMPWR     (SYSTEM_BLOCK1_BASE|0x08)
+#define	INTMASK     (SYSTEM_BLOCK1_BASE|0x0C)
+#define	GPIOSEL     (SYSTEM_BLOCK2_BASE|0x00)
+
+#define	GPIODATA    (GPIO_BLOCK_BASE|0x00)
+#define	GPIODIR     (GPIO_BLOCK_BASE|0x04)
+#define	GPIOIS      (GPIO_BLOCK_BASE|0x08)
+#define	GPIOIBE     (GPIO_BLOCK_BASE|0x0C)
+#define	GPIOIEV     (GPIO_BLOCK_BASE|0x10)
+#define	GPIOIE      (GPIO_BLOCK_BASE|0x14)
+#define	GPIORIS     (GPIO_BLOCK_BASE|0x18)
+#define	GPIOMIS     (GPIO_BLOCK_BASE|0x1C)
+#define	GPIOIC      (GPIO_BLOCK_BASE|0x20)
+#define	GPIOOMS     (GPIO_BLOCK_BASE|0x24)
+#define	GPIOPC      (GPIO_BLOCK_BASE|0x28)
+#define	GPIOID      (GPIO_BLOCK_BASE|0x30)
+
+#define SPI_WRITE(reg, val) \
+	{ SSITX,        0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \
+	{ 0, 5 },
+
+#define SPI_WRITE1(reg) \
+	{ SSITX,        (reg) & 0xff }, \
+	{ 0, 5 },
+
+struct mddi_table {
+	uint32_t reg;
+	uint32_t value;
+};
+static struct mddi_table mddi_toshiba_init_table[] = {
+	{ DPSET0,       0x09e90046 },
+	{ DPSET1,       0x00000118 },
+	{ DPSUS,        0x00000000 },
+	{ DPRUN,        0x00000001 },
+	{ 1,            14         }, /* msleep 14 */
+	{ SYSCKENA,     0x00000001 },
+	{ CLKENB,       0x0000A1EF },  /*    # SYS.CLKENB  # Enable clocks for each module (without DCLK , i2cCLK) */
+
+	{ GPIODATA,     0x02000200 },  /*   # GPI .GPIODATA  # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */
+	{ GPIODIR,      0x000030D  },  /* 24D   # GPI .GPIODIR  # Select direction of GPIO port (0,2,3,6,9 output) */
+	{ GPIOSEL,      0/*0x00000173*/},  /*   # SYS.GPIOSEL  # GPIO port multiplexing control */
+	{ GPIOPC,       0x03C300C0 },  /*   # GPI .GPIOPC  # GPIO2,3 PD cut */
+	{ WKREQ,        0x00000000 },  /*   # SYS.WKREQ  # Wake-up request event is VSYNC alignment */
+
+	{ GPIOIBE,      0x000003FF },
+	{ GPIOIS,       0x00000000 },
+	{ GPIOIC,       0x000003FF },
+	{ GPIOIE,       0x00000000 },
+
+	{ GPIODATA,     0x00040004 },  /*   # GPI .GPIODATA  # eDRAM VD supply */
+	{ 1,            1          }, /* msleep 1 */
+	{ GPIODATA,     0x02040004 },  /*   # GPI .GPIODATA  # eDRAM VD supply */
+	{ DRAMPWR,      0x00000001 }, /* eDRAM power */
+};
+
+#define GPIOSEL_VWAKEINT (1U << 0)
+#define INTMASK_VWAKEOUT (1U << 0)
+
+
+static struct clk *gp_clk;
+static int trout_new_backlight = 1;
+static struct vreg *vreg_mddi_1v5;
+static struct vreg *vreg_lcm_2v85;
+
+static void trout_process_mddi_table(struct msm_mddi_client_data *client_data,
+				     struct mddi_table *table, size_t count)
+{
+	int i;
+	for (i = 0; i < count; i++) {
+		uint32_t reg = table[i].reg;
+		uint32_t value = table[i].value;
+
+		if (reg == 0)
+			udelay(value);
+		else if (reg == 1)
+			msleep(value);
+		else
+			client_data->remote_write(client_data, value, reg);
+	}
+}
+
+static int trout_mddi_toshiba_client_init(
+	struct msm_mddi_bridge_platform_data *bridge_data,
+	struct msm_mddi_client_data *client_data)
+{
+	int panel_id;
+
+	client_data->auto_hibernate(client_data, 0);
+	trout_process_mddi_table(client_data, mddi_toshiba_init_table,
+				 ARRAY_SIZE(mddi_toshiba_init_table));
+	client_data->auto_hibernate(client_data, 1);
+	panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
+	if (panel_id > 1) {
+		printk(KERN_WARNING "unknown panel id at mddi_enable\n");
+		return -1;
+	}
+	return 0;
+}
+
+static int trout_mddi_toshiba_client_uninit(
+	struct msm_mddi_bridge_platform_data *bridge_data,
+	struct msm_mddi_client_data *client_data)
+{
+	return 0;
+}
+
+static struct resource resources_msm_fb[] = {
+	{
+		.start = MSM_FB_BASE,
+		.end = MSM_FB_BASE + MSM_FB_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+struct msm_mddi_bridge_platform_data toshiba_client_data = {
+	.init = trout_mddi_toshiba_client_init,
+	.uninit = trout_mddi_toshiba_client_uninit,
+	.fb_data = {
+		.xres = 320,
+		.yres = 480,
+		.width = 45,
+		.height = 67,
+		.output_format = 0,
+	},
+};
+
+static struct msm_mddi_platform_data mddi_pdata = {
+	.clk_rate = 122880000,
+	.fb_resource = resources_msm_fb,
+	.num_clients = 1,
+	.client_platform_data = {
+		{
+			.product_id = (0xd263 << 16 | 0),
+			.name = "mddi_c_d263_0000",
+			.id = 0,
+			.client_data = &toshiba_client_data,
+			.clk_rate = 0,
+		},
+	},
+};
+
+int __init trout_init_panel(void)
+{
+	int rc;
+
+	if (!machine_is_trout())
+		return 0;
+	vreg_mddi_1v5 = vreg_get(0, "gp2");
+	if (IS_ERR(vreg_mddi_1v5))
+		return PTR_ERR(vreg_mddi_1v5);
+	vreg_lcm_2v85 = vreg_get(0, "gp4");
+	if (IS_ERR(vreg_lcm_2v85))
+		return PTR_ERR(vreg_lcm_2v85);
+
+	trout_new_backlight = system_rev >= 5;
+	if (trout_new_backlight) {
+		uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT,
+						GPIO_NO_PULL, GPIO_8MA);
+		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
+	} else {
+		uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
+						GPIO_NO_PULL, GPIO_8MA);
+		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
+
+		gp_clk = clk_get(NULL, "gp_clk");
+		if (IS_ERR(gp_clk)) {
+			printk(KERN_ERR "trout_init_panel: could not get gp"
+			       "clock\n");
+			gp_clk = NULL;
+		}
+		rc = clk_set_rate(gp_clk, 19200000);
+		if (rc)
+			printk(KERN_ERR "trout_init_panel: set clock rate "
+			       "failed\n");
+	}
+
+	rc = platform_device_register(&msm_device_mdp);
+	if (rc)
+		return rc;
+	msm_device_mddi0.dev.platform_data = &mddi_pdata;
+	return platform_device_register(&msm_device_mddi0);
+}
+
+device_initcall(trout_init_panel);
diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c
index c57210f4f06..2069bfaa3a2 100644
--- a/arch/arm/mach-msm/clock.c
+++ b/arch/arm/mach-msm/clock.c
@@ -120,6 +120,21 @@ EXPORT_SYMBOL(clk_get_rate);
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
+	int ret;
+	if (clk->flags & CLKFLAG_MAX) {
+		ret = clk->ops->set_max_rate(clk->id, rate);
+		if (ret)
+			return ret;
+	}
+	if (clk->flags & CLKFLAG_MIN) {
+		ret = clk->ops->set_min_rate(clk->id, rate);
+		if (ret)
+			return ret;
+	}
+
+	if (clk->flags & CLKFLAG_MAX || clk->flags & CLKFLAG_MIN)
+		return ret;
+
 	return clk->ops->set_rate(clk->id, rate);
 }
 EXPORT_SYMBOL(clk_set_rate);
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
index 4e8c0bcdc92..fb548a8a21d 100644
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ b/arch/arm/mach-msm/devices-msm7x00.c
@@ -347,6 +347,73 @@ int __init msm_add_sdcc(unsigned int controller,
 	return platform_device_register(pdev);
 }
 
+static struct resource resources_mddi0[] = {
+	{
+		.start	= MSM_PMDH_PHYS,
+		.end	= MSM_PMDH_PHYS + MSM_PMDH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_MDDI_PRI,
+		.end	= INT_MDDI_PRI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource resources_mddi1[] = {
+	{
+		.start	= MSM_EMDH_PHYS,
+		.end	= MSM_EMDH_PHYS + MSM_EMDH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_MDDI_EXT,
+		.end	= INT_MDDI_EXT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_mddi0 = {
+	.name = "msm_mddi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(resources_mddi0),
+	.resource = resources_mddi0,
+	.dev = {
+		.coherent_dma_mask      = 0xffffffff,
+	},
+};
+
+struct platform_device msm_device_mddi1 = {
+	.name = "msm_mddi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(resources_mddi1),
+	.resource = resources_mddi1,
+	.dev = {
+		.coherent_dma_mask      = 0xffffffff,
+	},
+};
+
+static struct resource resources_mdp[] = {
+	{
+		.start	= MSM_MDP_PHYS,
+		.end	= MSM_MDP_PHYS + MSM_MDP_SIZE - 1,
+		.name	= "mdp",
+		.flags	= IORESOURCE_MEM
+	},
+	{
+		.start	= INT_MDP,
+		.end	= INT_MDP,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_mdp = {
+	.name = "msm_mdp",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(resources_mdp),
+	.resource = resources_mdp,
+};
+
 struct clk msm_clocks_7x01a[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
@@ -364,7 +431,7 @@ struct clk msm_clocks_7x01a[] = {
 	CLK_PCOM("mdp_clk",	MDP_CLK,	NULL, OFF),
 	CLK_PCOM("pbus_clk",	PBUS_CLK,	NULL, 0),
 	CLK_PCOM("pcm_clk",	PCM_CLK,	NULL, 0),
-	CLK_PCOM("pmdh_clk",	PMDH_CLK,	NULL, OFF ),
+	CLK_PCOM("mddi_clk",	PMDH_CLK,	NULL, OFF | CLK_MINMAX),
 	CLK_PCOM("sdac_clk",	SDAC_CLK,	NULL, OFF),
 	CLK_PCOM("sdc_clk",	SDC1_CLK,	&msm_device_sdc1.dev, OFF),
 	CLK_PCOM("sdc_pclk",	SDC1_P_CLK,	&msm_device_sdc1.dev, OFF),
diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c
index 7fcf2e3b769..4e9a0ab3e93 100644
--- a/arch/arm/mach-msm/devices-msm7x30.c
+++ b/arch/arm/mach-msm/devices-msm7x30.c
@@ -56,6 +56,77 @@ struct platform_device msm_device_smd = {
 	.id     = -1,
 };
 
+static struct resource resources_otg[] = {
+	{
+		.start	= MSM_HSUSB_PHYS,
+		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HS,
+		.end	= INT_USB_HS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_otg = {
+	.name		= "msm_otg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_otg),
+	.resource	= resources_otg,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+static struct resource resources_hsusb[] = {
+	{
+		.start	= MSM_HSUSB_PHYS,
+		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HS,
+		.end	= INT_USB_HS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_hsusb = {
+	.name		= "msm_hsusb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_hsusb),
+	.resource	= resources_hsusb,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+static u64 dma_mask = 0xffffffffULL;
+static struct resource resources_hsusb_host[] = {
+	{
+		.start	= MSM_HSUSB_PHYS,
+		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HS,
+		.end	= INT_USB_HS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_hsusb_host = {
+	.name		= "msm_hsusb_host",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_hsusb_host),
+	.resource	= resources_hsusb_host,
+	.dev		= {
+		.dma_mask               = &dma_mask,
+		.coherent_dma_mask      = 0xffffffffULL,
+	},
+};
+
 struct clk msm_clocks_7x30[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("adsp_clk",	ADSP_CLK,	NULL, 0),
@@ -107,6 +178,7 @@ struct clk msm_clocks_7x30[] = {
 	CLK_PCOM("tv_dac_clk",	TV_DAC_CLK,	NULL, 0),
 	CLK_PCOM("tv_enc_clk",	TV_ENC_CLK,	NULL, 0),
 	CLK_PCOM("uart_clk",	UART2_CLK,	&msm_device_uart2.dev, 0),
+	CLK_PCOM("usb_phy_clk",	USB_PHY_CLK,	NULL, 0),
 	CLK_PCOM("usb_hs_clk",		USB_HS_CLK,		NULL, OFF),
 	CLK_PCOM("usb_hs_pclk",		USB_HS_P_CLK,		NULL, OFF),
 	CLK_PCOM("usb_hs_core_clk",	USB_HS_CORE_CLK,	NULL, OFF),
diff --git a/arch/arm/mach-msm/devices-msm8x60-iommu.c b/arch/arm/mach-msm/devices-msm8x60-iommu.c
index 89b9d4437e9..f9e7bd34ec5 100644
--- a/arch/arm/mach-msm/devices-msm8x60-iommu.c
+++ b/arch/arm/mach-msm/devices-msm8x60-iommu.c
@@ -254,60 +254,86 @@ static struct resource msm_iommu_gfx2d0_resources[] = {
 	},
 };
 
+static struct resource msm_iommu_gfx2d1_resources[] = {
+	{
+		.start = MSM_IOMMU_GFX2D1_PHYS,
+		.end   = MSM_IOMMU_GFX2D1_PHYS + MSM_IOMMU_GFX2D1_SIZE - 1,
+		.name  = "physbase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "nonsecure_irq",
+		.start = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ,
+		.end   = SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.name = "secure_irq",
+		.start = SMMU_GFX2D1_CB_SC_SECURE_IRQ,
+		.end   = SMMU_GFX2D1_CB_SC_SECURE_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static struct platform_device msm_root_iommu_dev = {
 	.name = "msm_iommu",
 	.id = -1,
 };
 
-static struct msm_iommu_dev jpegd_smmu = {
+static struct msm_iommu_dev jpegd_iommu = {
 	.name = "jpegd",
 	.clk_rate = -1
 };
 
-static struct msm_iommu_dev vpe_smmu = {
+static struct msm_iommu_dev vpe_iommu = {
 	.name = "vpe"
 };
 
-static struct msm_iommu_dev mdp0_smmu = {
+static struct msm_iommu_dev mdp0_iommu = {
 	.name = "mdp0"
 };
 
-static struct msm_iommu_dev mdp1_smmu = {
+static struct msm_iommu_dev mdp1_iommu = {
 	.name = "mdp1"
 };
 
-static struct msm_iommu_dev rot_smmu = {
+static struct msm_iommu_dev rot_iommu = {
 	.name = "rot"
 };
 
-static struct msm_iommu_dev ijpeg_smmu = {
+static struct msm_iommu_dev ijpeg_iommu = {
 	.name = "ijpeg"
 };
 
-static struct msm_iommu_dev vfe_smmu = {
+static struct msm_iommu_dev vfe_iommu = {
 	.name = "vfe",
 	.clk_rate = -1
 };
 
-static struct msm_iommu_dev vcodec_a_smmu = {
+static struct msm_iommu_dev vcodec_a_iommu = {
 	.name = "vcodec_a"
 };
 
-static struct msm_iommu_dev vcodec_b_smmu = {
+static struct msm_iommu_dev vcodec_b_iommu = {
 	.name = "vcodec_b"
 };
 
-static struct msm_iommu_dev gfx3d_smmu = {
+static struct msm_iommu_dev gfx3d_iommu = {
 	.name = "gfx3d",
 	.clk_rate = 27000000
 };
 
-static struct msm_iommu_dev gfx2d0_smmu = {
+static struct msm_iommu_dev gfx2d0_iommu = {
 	.name = "gfx2d0",
 	.clk_rate = 27000000
 };
 
-static struct platform_device msm_device_smmu_jpegd = {
+static struct msm_iommu_dev gfx2d1_iommu = {
+	.name = "gfx2d1",
+	.clk_rate = 27000000
+};
+
+static struct platform_device msm_device_iommu_jpegd = {
 	.name = "msm_iommu",
 	.id = 0,
 	.dev = {
@@ -317,7 +343,7 @@ static struct platform_device msm_device_smmu_jpegd = {
 	.resource = msm_iommu_jpegd_resources,
 };
 
-static struct platform_device msm_device_smmu_vpe = {
+static struct platform_device msm_device_iommu_vpe = {
 	.name = "msm_iommu",
 	.id = 1,
 	.dev = {
@@ -327,7 +353,7 @@ static struct platform_device msm_device_smmu_vpe = {
 	.resource = msm_iommu_vpe_resources,
 };
 
-static struct platform_device msm_device_smmu_mdp0 = {
+static struct platform_device msm_device_iommu_mdp0 = {
 	.name = "msm_iommu",
 	.id = 2,
 	.dev = {
@@ -337,7 +363,7 @@ static struct platform_device msm_device_smmu_mdp0 = {
 	.resource = msm_iommu_mdp0_resources,
 };
 
-static struct platform_device msm_device_smmu_mdp1 = {
+static struct platform_device msm_device_iommu_mdp1 = {
 	.name = "msm_iommu",
 	.id = 3,
 	.dev = {
@@ -347,7 +373,7 @@ static struct platform_device msm_device_smmu_mdp1 = {
 	.resource = msm_iommu_mdp1_resources,
 };
 
-static struct platform_device msm_device_smmu_rot = {
+static struct platform_device msm_device_iommu_rot = {
 	.name = "msm_iommu",
 	.id = 4,
 	.dev = {
@@ -357,7 +383,7 @@ static struct platform_device msm_device_smmu_rot = {
 	.resource = msm_iommu_rot_resources,
 };
 
-static struct platform_device msm_device_smmu_ijpeg = {
+static struct platform_device msm_device_iommu_ijpeg = {
 	.name = "msm_iommu",
 	.id = 5,
 	.dev = {
@@ -367,7 +393,7 @@ static struct platform_device msm_device_smmu_ijpeg = {
 	.resource = msm_iommu_ijpeg_resources,
 };
 
-static struct platform_device msm_device_smmu_vfe = {
+static struct platform_device msm_device_iommu_vfe = {
 	.name = "msm_iommu",
 	.id = 6,
 	.dev = {
@@ -377,7 +403,7 @@ static struct platform_device msm_device_smmu_vfe = {
 	.resource = msm_iommu_vfe_resources,
 };
 
-static struct platform_device msm_device_smmu_vcodec_a = {
+static struct platform_device msm_device_iommu_vcodec_a = {
 	.name = "msm_iommu",
 	.id = 7,
 	.dev = {
@@ -387,7 +413,7 @@ static struct platform_device msm_device_smmu_vcodec_a = {
 	.resource = msm_iommu_vcodec_a_resources,
 };
 
-static struct platform_device msm_device_smmu_vcodec_b = {
+static struct platform_device msm_device_iommu_vcodec_b = {
 	.name = "msm_iommu",
 	.id = 8,
 	.dev = {
@@ -397,7 +423,7 @@ static struct platform_device msm_device_smmu_vcodec_b = {
 	.resource = msm_iommu_vcodec_b_resources,
 };
 
-static struct platform_device msm_device_smmu_gfx3d = {
+static struct platform_device msm_device_iommu_gfx3d = {
 	.name = "msm_iommu",
 	.id = 9,
 	.dev = {
@@ -407,7 +433,7 @@ static struct platform_device msm_device_smmu_gfx3d = {
 	.resource = msm_iommu_gfx3d_resources,
 };
 
-static struct platform_device msm_device_smmu_gfx2d0 = {
+static struct platform_device msm_device_iommu_gfx2d0 = {
 	.name = "msm_iommu",
 	.id = 10,
 	.dev = {
@@ -417,6 +443,16 @@ static struct platform_device msm_device_smmu_gfx2d0 = {
 	.resource = msm_iommu_gfx2d0_resources,
 };
 
+struct platform_device msm_device_iommu_gfx2d1 = {
+	.name = "msm_iommu",
+	.id = 11,
+	.dev = {
+		.parent = &msm_root_iommu_dev.dev,
+	},
+	.num_resources = ARRAY_SIZE(msm_iommu_gfx2d1_resources),
+	.resource = msm_iommu_gfx2d1_resources,
+};
+
 static struct msm_iommu_ctx_dev jpegd_src_ctx = {
 	.name = "jpegd_src",
 	.num = 0,
@@ -519,41 +555,36 @@ static struct msm_iommu_ctx_dev vcodec_b_mm2_ctx = {
 	.mids = {0, 1, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
 };
 
-static struct msm_iommu_ctx_dev gfx3d_rbpa_ctx = {
-	.name = "gfx3d_rbpa",
+static struct msm_iommu_ctx_dev gfx3d_user_ctx = {
+	.name = "gfx3d_user",
 	.num = 0,
-	.mids = {-1}
+	.mids = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, -1}
 };
 
-static struct msm_iommu_ctx_dev gfx3d_cpvgttc_ctx = {
-	.name = "gfx3d_cpvgttc",
+static struct msm_iommu_ctx_dev gfx3d_priv_ctx = {
+	.name = "gfx3d_priv",
 	.num = 1,
-	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
-};
-
-static struct msm_iommu_ctx_dev gfx3d_smmu_ctx = {
-	.name = "gfx3d_smmu",
-	.num = 2,
-	.mids = {8, 9, 10, 11, 12, -1}
+	.mids = {16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30,
+		 31, -1}
 };
 
-static struct msm_iommu_ctx_dev gfx2d0_pixv1_ctx = {
-	.name = "gfx2d0_pixv1_smmu",
+static struct msm_iommu_ctx_dev gfx2d0_2d0_ctx = {
+	.name = "gfx2d0_2d0",
 	.num = 0,
-	.mids = {0, 3, 4, -1}
+	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
 };
 
-static struct msm_iommu_ctx_dev gfx2d0_texv3_ctx = {
-	.name = "gfx2d0_texv3_smmu",
-	.num = 1,
-	.mids = {1, 6, 7, -1}
+static struct msm_iommu_ctx_dev gfx2d1_2d1_ctx = {
+	.name = "gfx2d1_2d1",
+	.num = 0,
+	.mids = {0, 1, 2, 3, 4, 5, 6, 7, -1}
 };
 
 static struct platform_device msm_device_jpegd_src_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 0,
 	.dev = {
-		.parent = &msm_device_smmu_jpegd.dev,
+		.parent = &msm_device_iommu_jpegd.dev,
 	},
 };
 
@@ -561,7 +592,7 @@ static struct platform_device msm_device_jpegd_dst_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 1,
 	.dev = {
-		.parent = &msm_device_smmu_jpegd.dev,
+		.parent = &msm_device_iommu_jpegd.dev,
 	},
 };
 
@@ -569,7 +600,7 @@ static struct platform_device msm_device_vpe_src_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 2,
 	.dev = {
-		.parent = &msm_device_smmu_vpe.dev,
+		.parent = &msm_device_iommu_vpe.dev,
 	},
 };
 
@@ -577,7 +608,7 @@ static struct platform_device msm_device_vpe_dst_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 3,
 	.dev = {
-		.parent = &msm_device_smmu_vpe.dev,
+		.parent = &msm_device_iommu_vpe.dev,
 	},
 };
 
@@ -585,7 +616,7 @@ static struct platform_device msm_device_mdp_vg1_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 4,
 	.dev = {
-		.parent = &msm_device_smmu_mdp0.dev,
+		.parent = &msm_device_iommu_mdp0.dev,
 	},
 };
 
@@ -593,7 +624,7 @@ static struct platform_device msm_device_mdp_rgb1_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 5,
 	.dev = {
-		.parent = &msm_device_smmu_mdp0.dev,
+		.parent = &msm_device_iommu_mdp0.dev,
 	},
 };
 
@@ -601,7 +632,7 @@ static struct platform_device msm_device_mdp_vg2_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 6,
 	.dev = {
-		.parent = &msm_device_smmu_mdp1.dev,
+		.parent = &msm_device_iommu_mdp1.dev,
 	},
 };
 
@@ -609,7 +640,7 @@ static struct platform_device msm_device_mdp_rgb2_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 7,
 	.dev = {
-		.parent = &msm_device_smmu_mdp1.dev,
+		.parent = &msm_device_iommu_mdp1.dev,
 	},
 };
 
@@ -617,7 +648,7 @@ static struct platform_device msm_device_rot_src_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 8,
 	.dev = {
-		.parent = &msm_device_smmu_rot.dev,
+		.parent = &msm_device_iommu_rot.dev,
 	},
 };
 
@@ -625,7 +656,7 @@ static struct platform_device msm_device_rot_dst_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 9,
 	.dev = {
-		.parent = &msm_device_smmu_rot.dev,
+		.parent = &msm_device_iommu_rot.dev,
 	},
 };
 
@@ -633,7 +664,7 @@ static struct platform_device msm_device_ijpeg_src_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 10,
 	.dev = {
-		.parent = &msm_device_smmu_ijpeg.dev,
+		.parent = &msm_device_iommu_ijpeg.dev,
 	},
 };
 
@@ -641,7 +672,7 @@ static struct platform_device msm_device_ijpeg_dst_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 11,
 	.dev = {
-		.parent = &msm_device_smmu_ijpeg.dev,
+		.parent = &msm_device_iommu_ijpeg.dev,
 	},
 };
 
@@ -649,7 +680,7 @@ static struct platform_device msm_device_vfe_imgwr_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 12,
 	.dev = {
-		.parent = &msm_device_smmu_vfe.dev,
+		.parent = &msm_device_iommu_vfe.dev,
 	},
 };
 
@@ -657,7 +688,7 @@ static struct platform_device msm_device_vfe_misc_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 13,
 	.dev = {
-		.parent = &msm_device_smmu_vfe.dev,
+		.parent = &msm_device_iommu_vfe.dev,
 	},
 };
 
@@ -665,7 +696,7 @@ static struct platform_device msm_device_vcodec_a_stream_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 14,
 	.dev = {
-		.parent = &msm_device_smmu_vcodec_a.dev,
+		.parent = &msm_device_iommu_vcodec_a.dev,
 	},
 };
 
@@ -673,7 +704,7 @@ static struct platform_device msm_device_vcodec_a_mm1_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 15,
 	.dev = {
-		.parent = &msm_device_smmu_vcodec_a.dev,
+		.parent = &msm_device_iommu_vcodec_a.dev,
 	},
 };
 
@@ -681,76 +712,70 @@ static struct platform_device msm_device_vcodec_b_mm2_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 16,
 	.dev = {
-		.parent = &msm_device_smmu_vcodec_b.dev,
+		.parent = &msm_device_iommu_vcodec_b.dev,
 	},
 };
 
-static struct platform_device msm_device_gfx3d_rbpa_ctx = {
+static struct platform_device msm_device_gfx3d_user_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 17,
 	.dev = {
-		.parent = &msm_device_smmu_gfx3d.dev,
+		.parent = &msm_device_iommu_gfx3d.dev,
 	},
 };
 
-static struct platform_device msm_device_gfx3d_cpvgttc_ctx = {
+static struct platform_device msm_device_gfx3d_priv_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 18,
 	.dev = {
-		.parent = &msm_device_smmu_gfx3d.dev,
+		.parent = &msm_device_iommu_gfx3d.dev,
 	},
 };
 
-static struct platform_device msm_device_gfx3d_smmu_ctx = {
+static struct platform_device msm_device_gfx2d0_2d0_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 19,
 	.dev = {
-		.parent = &msm_device_smmu_gfx3d.dev,
+		.parent = &msm_device_iommu_gfx2d0.dev,
 	},
 };
 
-static struct platform_device msm_device_gfx2d0_pixv1_ctx = {
+static struct platform_device msm_device_gfx2d1_2d1_ctx = {
 	.name = "msm_iommu_ctx",
 	.id = 20,
 	.dev = {
-		.parent = &msm_device_smmu_gfx2d0.dev,
-	},
-};
-
-static struct platform_device msm_device_gfx2d0_texv3_ctx = {
-	.name = "msm_iommu_ctx",
-	.id = 21,
-	.dev = {
-		.parent = &msm_device_smmu_gfx2d0.dev,
+		.parent = &msm_device_iommu_gfx2d1.dev,
 	},
 };
 
 static struct platform_device *msm_iommu_devs[] = {
-	&msm_device_smmu_jpegd,
-	&msm_device_smmu_vpe,
-	&msm_device_smmu_mdp0,
-	&msm_device_smmu_mdp1,
-	&msm_device_smmu_rot,
-	&msm_device_smmu_ijpeg,
-	&msm_device_smmu_vfe,
-	&msm_device_smmu_vcodec_a,
-	&msm_device_smmu_vcodec_b,
-	&msm_device_smmu_gfx3d,
-	&msm_device_smmu_gfx2d0,
+	&msm_device_iommu_jpegd,
+	&msm_device_iommu_vpe,
+	&msm_device_iommu_mdp0,
+	&msm_device_iommu_mdp1,
+	&msm_device_iommu_rot,
+	&msm_device_iommu_ijpeg,
+	&msm_device_iommu_vfe,
+	&msm_device_iommu_vcodec_a,
+	&msm_device_iommu_vcodec_b,
+	&msm_device_iommu_gfx3d,
+	&msm_device_iommu_gfx2d0,
+	&msm_device_iommu_gfx2d1,
 };
 
 static struct msm_iommu_dev *msm_iommu_data[] = {
-	&jpegd_smmu,
-	&vpe_smmu,
-	&mdp0_smmu,
-	&mdp1_smmu,
-	&rot_smmu,
-	&ijpeg_smmu,
-	&vfe_smmu,
-	&vcodec_a_smmu,
-	&vcodec_b_smmu,
-	&gfx3d_smmu,
-	&gfx2d0_smmu,
+	&jpegd_iommu,
+	&vpe_iommu,
+	&mdp0_iommu,
+	&mdp1_iommu,
+	&rot_iommu,
+	&ijpeg_iommu,
+	&vfe_iommu,
+	&vcodec_a_iommu,
+	&vcodec_b_iommu,
+	&gfx3d_iommu,
+	&gfx2d0_iommu,
+	&gfx2d1_iommu,
 };
 
 static struct platform_device *msm_iommu_ctx_devs[] = {
@@ -771,11 +796,10 @@ static struct platform_device *msm_iommu_ctx_devs[] = {
 	&msm_device_vcodec_a_stream_ctx,
 	&msm_device_vcodec_a_mm1_ctx,
 	&msm_device_vcodec_b_mm2_ctx,
-	&msm_device_gfx3d_rbpa_ctx,
-	&msm_device_gfx3d_cpvgttc_ctx,
-	&msm_device_gfx3d_smmu_ctx,
-	&msm_device_gfx2d0_pixv1_ctx,
-	&msm_device_gfx2d0_texv3_ctx,
+	&msm_device_gfx3d_user_ctx,
+	&msm_device_gfx3d_priv_ctx,
+	&msm_device_gfx2d0_2d0_ctx,
+	&msm_device_gfx2d1_2d1_ctx,
 };
 
 static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = {
@@ -796,14 +820,13 @@ static struct msm_iommu_ctx_dev *msm_iommu_ctx_data[] = {
 	&vcodec_a_stream_ctx,
 	&vcodec_a_mm1_ctx,
 	&vcodec_b_mm2_ctx,
-	&gfx3d_rbpa_ctx,
-	&gfx3d_cpvgttc_ctx,
-	&gfx3d_smmu_ctx,
-	&gfx2d0_pixv1_ctx,
-	&gfx2d0_texv3_ctx,
+	&gfx3d_user_ctx,
+	&gfx3d_priv_ctx,
+	&gfx2d0_2d0_ctx,
+	&gfx2d1_2d1_ctx,
 };
 
-static int msm8x60_iommu_init(void)
+static int __init msm8x60_iommu_init(void)
 {
 	int ret, i;
 
@@ -826,7 +849,7 @@ static int msm8x60_iommu_init(void)
 		ret = platform_device_register(msm_iommu_devs[i]);
 
 		if (ret != 0) {
-			pr_err("platform_device_register smmu failed, "
+			pr_err("platform_device_register iommu failed, "
 			       "i = %d\n", i);
 			goto failure_unwind;
 		}
@@ -837,7 +860,7 @@ static int msm8x60_iommu_init(void)
 					       msm_iommu_ctx_data[i],
 					       sizeof(*msm_iommu_ctx_devs[i]));
 		if (ret != 0) {
-			pr_err("platform_device_add_data smmu failed, "
+			pr_err("platform_device_add_data iommu failed, "
 			       "i = %d\n", i);
 			goto failure_unwind2;
 		}
@@ -863,7 +886,7 @@ failure:
 	return ret;
 }
 
-static void msm8x60_iommu_exit(void)
+static void __exit msm8x60_iommu_exit(void)
 {
 	int i;
 
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index 6fe67c5d1ae..a4b798f20cc 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -53,6 +53,77 @@ struct platform_device msm_device_smd = {
 	.id     = -1,
 };
 
+static struct resource resources_otg[] = {
+	{
+		.start	= MSM_HSUSB_PHYS,
+		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HS,
+		.end	= INT_USB_HS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_otg = {
+	.name		= "msm_otg",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_otg),
+	.resource	= resources_otg,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+static struct resource resources_hsusb[] = {
+	{
+		.start	= MSM_HSUSB_PHYS,
+		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HS,
+		.end	= INT_USB_HS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_hsusb = {
+	.name		= "msm_hsusb",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_hsusb),
+	.resource	= resources_hsusb,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+static u64 dma_mask = 0xffffffffULL;
+static struct resource resources_hsusb_host[] = {
+	{
+		.start	= MSM_HSUSB_PHYS,
+		.end	= MSM_HSUSB_PHYS + MSM_HSUSB_SIZE,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_USB_HS,
+		.end	= INT_USB_HS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device msm_device_hsusb_host = {
+	.name		= "msm_hsusb_host",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(resources_hsusb_host),
+	.resource	= resources_hsusb_host,
+	.dev		= {
+		.dma_mask               = &dma_mask,
+		.coherent_dma_mask      = 0xffffffffULL,
+	},
+};
+
 struct clk msm_clocks_8x50[] = {
 	CLK_PCOM("adm_clk",	ADM_CLK,	NULL, 0),
 	CLK_PCOM("ebi1_clk",	EBI1_CLK,	NULL, CLK_MIN),
diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h
index 568443e7642..87c70bfce2b 100644
--- a/arch/arm/mach-msm/devices.h
+++ b/arch/arm/mach-msm/devices.h
@@ -28,6 +28,8 @@ extern struct platform_device msm_device_sdc3;
 extern struct platform_device msm_device_sdc4;
 
 extern struct platform_device msm_device_hsusb;
+extern struct platform_device msm_device_otg;
+extern struct platform_device msm_device_hsusb_host;
 
 extern struct platform_device msm_device_i2c;
 
@@ -35,6 +37,10 @@ extern struct platform_device msm_device_smd;
 
 extern struct platform_device msm_device_nand;
 
+extern struct platform_device msm_device_mddi0;
+extern struct platform_device msm_device_mddi1;
+extern struct platform_device msm_device_mdp;
+
 extern struct clk msm_clocks_7x01a[];
 extern unsigned msm_num_clocks_7x01a;
 
diff --git a/arch/arm/mach-msm/gpio-v2.c b/arch/arm/mach-msm/gpio-v2.c
new file mode 100644
index 00000000000..0de19ec74e3
--- /dev/null
+++ b/arch/arm/mach-msm/gpio-v2.c
@@ -0,0 +1,426 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <mach/msm_iomap.h>
+#include "gpiomux.h"
+
+/* Bits of interest in the GPIO_IN_OUT register.
+ */
+enum {
+	GPIO_IN  = 0,
+	GPIO_OUT = 1
+};
+
+/* Bits of interest in the GPIO_INTR_STATUS register.
+ */
+enum {
+	INTR_STATUS = 0,
+};
+
+/* Bits of interest in the GPIO_CFG register.
+ */
+enum {
+	GPIO_OE = 9,
+};
+
+/* Bits of interest in the GPIO_INTR_CFG register.
+ * When a GPIO triggers, two separate decisions are made, controlled
+ * by two separate flags.
+ *
+ * - First, INTR_RAW_STATUS_EN controls whether or not the GPIO_INTR_STATUS
+ * register for that GPIO will be updated to reflect the triggering of that
+ * gpio.  If this bit is 0, this register will not be updated.
+ * - Second, INTR_ENABLE controls whether an interrupt is triggered.
+ *
+ * If INTR_ENABLE is set and INTR_RAW_STATUS_EN is NOT set, an interrupt
+ * can be triggered but the status register will not reflect it.
+ */
+enum {
+	INTR_ENABLE        = 0,
+	INTR_POL_CTL       = 1,
+	INTR_DECT_CTL      = 2,
+	INTR_RAW_STATUS_EN = 3,
+};
+
+/* Codes of interest in GPIO_INTR_CFG_SU.
+ */
+enum {
+	TARGET_PROC_SCORPION = 4,
+	TARGET_PROC_NONE     = 7,
+};
+
+
+#define GPIO_INTR_CFG_SU(gpio)    (MSM_TLMM_BASE + 0x0400 + (0x04 * (gpio)))
+#define GPIO_CONFIG(gpio)         (MSM_TLMM_BASE + 0x1000 + (0x10 * (gpio)))
+#define GPIO_IN_OUT(gpio)         (MSM_TLMM_BASE + 0x1004 + (0x10 * (gpio)))
+#define GPIO_INTR_CFG(gpio)       (MSM_TLMM_BASE + 0x1008 + (0x10 * (gpio)))
+#define GPIO_INTR_STATUS(gpio)    (MSM_TLMM_BASE + 0x100c + (0x10 * (gpio)))
+
+/**
+ * struct msm_gpio_dev: the MSM8660 SoC GPIO device structure
+ *
+ * @enabled_irqs: a bitmap used to optimize the summary-irq handler.  By
+ * keeping track of which gpios are unmasked as irq sources, we avoid
+ * having to do readl calls on hundreds of iomapped registers each time
+ * the summary interrupt fires in order to locate the active interrupts.
+ *
+ * @wake_irqs: a bitmap for tracking which interrupt lines are enabled
+ * as wakeup sources.  When the device is suspended, interrupts which are
+ * not wakeup sources are disabled.
+ *
+ * @dual_edge_irqs: a bitmap used to track which irqs are configured
+ * as dual-edge, as this is not supported by the hardware and requires
+ * some special handling in the driver.
+ */
+struct msm_gpio_dev {
+	struct gpio_chip gpio_chip;
+	DECLARE_BITMAP(enabled_irqs, NR_GPIO_IRQS);
+	DECLARE_BITMAP(wake_irqs, NR_GPIO_IRQS);
+	DECLARE_BITMAP(dual_edge_irqs, NR_GPIO_IRQS);
+};
+
+static DEFINE_SPINLOCK(tlmm_lock);
+
+static inline struct msm_gpio_dev *to_msm_gpio_dev(struct gpio_chip *chip)
+{
+	return container_of(chip, struct msm_gpio_dev, gpio_chip);
+}
+
+static inline void set_gpio_bits(unsigned n, void __iomem *reg)
+{
+	writel(readl(reg) | n, reg);
+}
+
+static inline void clear_gpio_bits(unsigned n, void __iomem *reg)
+{
+	writel(readl(reg) & ~n, reg);
+}
+
+static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return readl(GPIO_IN_OUT(offset)) & BIT(GPIO_IN);
+}
+
+static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	writel(val ? BIT(GPIO_OUT) : 0, GPIO_IN_OUT(offset));
+}
+
+static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&tlmm_lock, irq_flags);
+	clear_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset));
+	spin_unlock_irqrestore(&tlmm_lock, irq_flags);
+	return 0;
+}
+
+static int msm_gpio_direction_output(struct gpio_chip *chip,
+				unsigned offset,
+				int val)
+{
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&tlmm_lock, irq_flags);
+	msm_gpio_set(chip, offset, val);
+	set_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset));
+	spin_unlock_irqrestore(&tlmm_lock, irq_flags);
+	return 0;
+}
+
+static int msm_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	return msm_gpiomux_get(chip->base + offset);
+}
+
+static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	msm_gpiomux_put(chip->base + offset);
+}
+
+static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return MSM_GPIO_TO_INT(chip->base + offset);
+}
+
+static inline int msm_irq_to_gpio(struct gpio_chip *chip, unsigned irq)
+{
+	return irq - MSM_GPIO_TO_INT(chip->base);
+}
+
+static struct msm_gpio_dev msm_gpio = {
+	.gpio_chip = {
+		.base             = 0,
+		.ngpio            = NR_GPIO_IRQS,
+		.direction_input  = msm_gpio_direction_input,
+		.direction_output = msm_gpio_direction_output,
+		.get              = msm_gpio_get,
+		.set              = msm_gpio_set,
+		.to_irq           = msm_gpio_to_irq,
+		.request          = msm_gpio_request,
+		.free             = msm_gpio_free,
+	},
+};
+
+/* For dual-edge interrupts in software, since the hardware has no
+ * such support:
+ *
+ * At appropriate moments, this function may be called to flip the polarity
+ * settings of both-edge irq lines to try and catch the next edge.
+ *
+ * The attempt is considered successful if:
+ * - the status bit goes high, indicating that an edge was caught, or
+ * - the input value of the gpio doesn't change during the attempt.
+ * If the value changes twice during the process, that would cause the first
+ * test to fail but would force the second, as two opposite
+ * transitions would cause a detection no matter the polarity setting.
+ *
+ * The do-loop tries to sledge-hammer closed the timing hole between
+ * the initial value-read and the polarity-write - if the line value changes
+ * during that window, an interrupt is lost, the new polarity setting is
+ * incorrect, and the first success test will fail, causing a retry.
+ *
+ * Algorithm comes from Google's msmgpio driver, see mach-msm/gpio.c.
+ */
+static void msm_gpio_update_dual_edge_pos(unsigned gpio)
+{
+	int loop_limit = 100;
+	unsigned val, val2, intstat;
+
+	do {
+		val = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN);
+		if (val)
+			clear_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio));
+		else
+			set_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio));
+		val2 = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN);
+		intstat = readl(GPIO_INTR_STATUS(gpio)) & BIT(INTR_STATUS);
+		if (intstat || val == val2)
+			return;
+	} while (loop_limit-- > 0);
+	pr_err("dual-edge irq failed to stabilize, "
+	       "interrupts dropped. %#08x != %#08x\n",
+	       val, val2);
+}
+
+static void msm_gpio_irq_ack(unsigned int irq)
+{
+	int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
+
+	writel(BIT(INTR_STATUS), GPIO_INTR_STATUS(gpio));
+	if (test_bit(gpio, msm_gpio.dual_edge_irqs))
+		msm_gpio_update_dual_edge_pos(gpio);
+}
+
+static void msm_gpio_irq_mask(unsigned int irq)
+{
+	int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&tlmm_lock, irq_flags);
+	writel(TARGET_PROC_NONE, GPIO_INTR_CFG_SU(gpio));
+	clear_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio));
+	__clear_bit(gpio, msm_gpio.enabled_irqs);
+	spin_unlock_irqrestore(&tlmm_lock, irq_flags);
+}
+
+static void msm_gpio_irq_unmask(unsigned int irq)
+{
+	int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&tlmm_lock, irq_flags);
+	__set_bit(gpio, msm_gpio.enabled_irqs);
+	set_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio));
+	writel(TARGET_PROC_SCORPION, GPIO_INTR_CFG_SU(gpio));
+	spin_unlock_irqrestore(&tlmm_lock, irq_flags);
+}
+
+static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+	int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
+	unsigned long irq_flags;
+	uint32_t bits;
+
+	spin_lock_irqsave(&tlmm_lock, irq_flags);
+
+	bits = readl(GPIO_INTR_CFG(gpio));
+
+	if (flow_type & IRQ_TYPE_EDGE_BOTH) {
+		bits |= BIT(INTR_DECT_CTL);
+		irq_desc[irq].handle_irq = handle_edge_irq;
+		if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
+			__set_bit(gpio, msm_gpio.dual_edge_irqs);
+		else
+			__clear_bit(gpio, msm_gpio.dual_edge_irqs);
+	} else {
+		bits &= ~BIT(INTR_DECT_CTL);
+		irq_desc[irq].handle_irq = handle_level_irq;
+		__clear_bit(gpio, msm_gpio.dual_edge_irqs);
+	}
+
+	if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
+		bits |= BIT(INTR_POL_CTL);
+	else
+		bits &= ~BIT(INTR_POL_CTL);
+
+	writel(bits, GPIO_INTR_CFG(gpio));
+
+	if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
+		msm_gpio_update_dual_edge_pos(gpio);
+
+	spin_unlock_irqrestore(&tlmm_lock, irq_flags);
+
+	return 0;
+}
+
+/*
+ * When the summary IRQ is raised, any number of GPIO lines may be high.
+ * It is the job of the summary handler to find all those GPIO lines
+ * which have been set as summary IRQ lines and which are triggered,
+ * and to call their interrupt handlers.
+ */
+static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long i;
+
+	for (i = find_first_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS);
+	     i < NR_GPIO_IRQS;
+	     i = find_next_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS, i + 1)) {
+		if (readl(GPIO_INTR_STATUS(i)) & BIT(INTR_STATUS))
+			generic_handle_irq(msm_gpio_to_irq(&msm_gpio.gpio_chip,
+							   i));
+	}
+	desc->chip->ack(irq);
+}
+
+static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+	int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
+
+	if (on) {
+		if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS))
+			set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 1);
+		set_bit(gpio, msm_gpio.wake_irqs);
+	} else {
+		clear_bit(gpio, msm_gpio.wake_irqs);
+		if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS))
+			set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 0);
+	}
+
+	return 0;
+}
+
+static struct irq_chip msm_gpio_irq_chip = {
+	.name		= "msmgpio",
+	.mask		= msm_gpio_irq_mask,
+	.unmask		= msm_gpio_irq_unmask,
+	.ack		= msm_gpio_irq_ack,
+	.set_type	= msm_gpio_irq_set_type,
+	.set_wake	= msm_gpio_irq_set_wake,
+};
+
+static int __devinit msm_gpio_probe(struct platform_device *dev)
+{
+	int i, irq, ret;
+
+	bitmap_zero(msm_gpio.enabled_irqs, NR_GPIO_IRQS);
+	bitmap_zero(msm_gpio.wake_irqs, NR_GPIO_IRQS);
+	bitmap_zero(msm_gpio.dual_edge_irqs, NR_GPIO_IRQS);
+	msm_gpio.gpio_chip.label = dev->name;
+	ret = gpiochip_add(&msm_gpio.gpio_chip);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < msm_gpio.gpio_chip.ngpio; ++i) {
+		irq = msm_gpio_to_irq(&msm_gpio.gpio_chip, i);
+		set_irq_chip(irq, &msm_gpio_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(TLMM_SCSS_SUMMARY_IRQ,
+				msm_summary_irq_handler);
+	return 0;
+}
+
+static int __devexit msm_gpio_remove(struct platform_device *dev)
+{
+	int ret = gpiochip_remove(&msm_gpio.gpio_chip);
+
+	if (ret < 0)
+		return ret;
+
+	set_irq_handler(TLMM_SCSS_SUMMARY_IRQ, NULL);
+
+	return 0;
+}
+
+static struct platform_driver msm_gpio_driver = {
+	.probe = msm_gpio_probe,
+	.remove = __devexit_p(msm_gpio_remove),
+	.driver = {
+		.name = "msmgpio",
+		.owner = THIS_MODULE,
+	},
+};
+
+static struct platform_device msm_device_gpio = {
+	.name = "msmgpio",
+	.id   = -1,
+};
+
+static int __init msm_gpio_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&msm_gpio_driver);
+	if (!rc) {
+		rc = platform_device_register(&msm_device_gpio);
+		if (rc)
+			platform_driver_unregister(&msm_gpio_driver);
+	}
+
+	return rc;
+}
+
+static void __exit msm_gpio_exit(void)
+{
+	platform_device_unregister(&msm_device_gpio);
+	platform_driver_unregister(&msm_gpio_driver);
+}
+
+postcore_initcall(msm_gpio_init);
+module_exit(msm_gpio_exit);
+
+MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>");
+MODULE_DESCRIPTION("Driver for Qualcomm MSM TLMMv2 SoC GPIOs");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:msmgpio");
diff --git a/arch/arm/mach-msm/include/mach/iommu.h b/arch/arm/mach-msm/include/mach/iommu.h
index 218ef5732a2..296c0f10f23 100644
--- a/arch/arm/mach-msm/include/mach/iommu.h
+++ b/arch/arm/mach-msm/include/mach/iommu.h
@@ -20,13 +20,26 @@
 
 #include <linux/interrupt.h>
 
+/* Sharability attributes of MSM IOMMU mappings */
+#define MSM_IOMMU_ATTR_NON_SH		0x0
+#define MSM_IOMMU_ATTR_SH		0x4
+
+/* Cacheability attributes of MSM IOMMU mappings */
+#define MSM_IOMMU_ATTR_NONCACHED	0x0
+#define MSM_IOMMU_ATTR_CACHED_WB_WA	0x1
+#define MSM_IOMMU_ATTR_CACHED_WB_NWA	0x2
+#define MSM_IOMMU_ATTR_CACHED_WT	0x3
+
+/* Mask for the cache policy attribute */
+#define MSM_IOMMU_CP_MASK		0x03
+
 /* Maximum number of Machine IDs that we are allowing to be mapped to the same
  * context bank. The number of MIDs mapped to the same CB does not affect
  * performance, but there is a practical limit on how many distinct MIDs may
  * be present. These mappings are typically determined at design time and are
  * not expected to change at run time.
  */
-#define MAX_NUM_MIDS	16
+#define MAX_NUM_MIDS	32
 
 /**
  * struct msm_iommu_dev - a single IOMMU hardware instance
diff --git a/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
index f9386d3a2f7..c2c3da9444f 100644
--- a/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
+++ b/arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h
@@ -54,6 +54,7 @@ do { \
 
 #define NUM_FL_PTE	4096
 #define NUM_SL_PTE	256
+#define NUM_TEX_CLASS	8
 
 /* First-level page table bits */
 #define FL_BASE_MASK		0xFFFFFC00
@@ -63,6 +64,9 @@ do { \
 #define FL_AP_WRITE		(1 << 10)
 #define FL_AP_READ		(1 << 11)
 #define FL_SHARED		(1 << 16)
+#define FL_BUFFERABLE		(1 << 2)
+#define FL_CACHEABLE		(1 << 3)
+#define FL_TEX0			(1 << 12)
 #define FL_OFFSET(va)		(((va) & 0xFFF00000) >> 20)
 
 /* Second-level page table bits */
@@ -73,8 +77,20 @@ do { \
 #define SL_AP0			(1 << 4)
 #define SL_AP1			(2 << 4)
 #define SL_SHARED		(1 << 10)
+#define SL_BUFFERABLE		(1 << 2)
+#define SL_CACHEABLE		(1 << 3)
+#define SL_TEX0			(1 << 6)
 #define SL_OFFSET(va)		(((va) & 0xFF000) >> 12)
 
+/* Memory type and cache policy attributes */
+#define MT_SO			0
+#define MT_DEV			1
+#define MT_NORMAL		2
+#define CP_NONCACHED		0
+#define CP_WB_WA		1
+#define CP_WT			2
+#define CP_WB_NWA		3
+
 /* Global register setters / getters */
 #define SET_M2VCBR_N(b, N, v)	 SET_GLOBAL_REG_N(M2VCBR_N, N, (b), (v))
 #define SET_CBACR_N(b, N, v)	 SET_GLOBAL_REG_N(CBACR_N, N, (b), (v))
@@ -706,7 +722,9 @@ do { \
 #define GET_OCPC5(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC5)
 #define GET_OCPC6(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC6)
 #define GET_OCPC7(b, c)		GET_CONTEXT_FIELD(b, c, NMRR, OCPC7)
-
+#define NMRR_ICP(nmrr, n)	(((nmrr) & (3 << ((n) * 2))) >> ((n) * 2))
+#define NMRR_OCP(nmrr, n)	(((nmrr) & (3 << ((n) * 2 + 16))) >> \
+								((n) * 2 + 16))
 
 /* PAR */
 #define GET_FAULT(b, c)		GET_CONTEXT_FIELD(b, c, PAR, FAULT)
@@ -750,6 +768,8 @@ do { \
 #define GET_NOS5(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS5)
 #define GET_NOS6(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS6)
 #define GET_NOS7(b, c)		GET_CONTEXT_FIELD(b, c, PRRR, NOS7)
+#define PRRR_NOS(prrr, n)	 ((prrr) & (1 << ((n) + 24)) ? 1 : 0)
+#define PRRR_MT(prrr, n)	 ((((prrr) & (3 << ((n) * 2))) >> ((n) * 2)))
 
 
 /* RESUME */
diff --git a/arch/arm/mach-msm/include/mach/irqs-8x60.h b/arch/arm/mach-msm/include/mach/irqs-8x60.h
index 36074cfc9ad..f65841c74c0 100644
--- a/arch/arm/mach-msm/include/mach/irqs-8x60.h
+++ b/arch/arm/mach-msm/include/mach/irqs-8x60.h
@@ -237,7 +237,12 @@
 #define GSBI11_QUP_IRQ				(GIC_SPI_START + 194)
 #define INT_UART12DM_IRQ			(GIC_SPI_START + 195)
 #define GSBI12_QUP_IRQ				(GIC_SPI_START + 196)
-/*SPI 197 to 216 arent used in 8x60*/
+
+/*SPI 197 to 209 arent used in 8x60*/
+#define SMMU_GFX2D1_CB_SC_SECURE_IRQ            (GIC_SPI_START + 210)
+#define SMMU_GFX2D1_CB_SC_NON_SECURE_IRQ        (GIC_SPI_START + 211)
+
+/*SPI 212 to 216 arent used in 8x60*/
 #define SMPSS_SPARE_1				(GIC_SPI_START + 217)
 #define SMPSS_SPARE_2				(GIC_SPI_START + 218)
 #define SMPSS_SPARE_3				(GIC_SPI_START + 219)
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
index 8a00c2defbc..0fd7b68ca11 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h
@@ -119,4 +119,7 @@
 #define MSM_AD5_PHYS          0xA7000000
 #define MSM_AD5_SIZE          (SZ_1M*13)
 
+#define MSM_HSUSB_PHYS        0xA3600000
+#define MSM_HSUSB_SIZE        SZ_1K
+
 #endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
index 45bab50e3ee..7c43a9bff1a 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
@@ -98,4 +98,7 @@
 #define MSM_IOMMU_GFX2D0_PHYS	0x07D00000
 #define MSM_IOMMU_GFX2D0_SIZE	SZ_1M
 
+#define MSM_IOMMU_GFX2D1_PHYS	0x07E00000
+#define MSM_IOMMU_GFX2D1_SIZE	SZ_1M
+
 #endif
diff --git a/arch/arm/mach-msm/include/mach/smp.h b/arch/arm/mach-msm/include/mach/smp.h
index 3ff7bf5e679..a95f7b9efe3 100644
--- a/arch/arm/mach-msm/include/mach/smp.h
+++ b/arch/arm/mach-msm/include/mach/smp.h
@@ -31,9 +31,9 @@
 
 #include <asm/hardware/gic.h>
 
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 
 #endif
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
index 31a32ad062d..d138448eff1 100644
--- a/arch/arm/mach-msm/include/mach/vmalloc.h
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_ARCH_MSM_VMALLOC_H
 #define __ASM_ARCH_MSM_VMALLOC_H
 
-#define VMALLOC_END	  0xd0000000
+#define VMALLOC_END	  0xd0000000UL
 
 #endif
 
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index d36b6107414..f912d7bf188 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -163,3 +163,4 @@ __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 	return __arm_ioremap_caller(phys_addr, size, mtype,
 		__builtin_return_address(0));
 }
+EXPORT_SYMBOL(__msm_ioremap);
diff --git a/arch/arm/mach-msm/iommu.c b/arch/arm/mach-msm/iommu.c
index f71747db3be..e2d58e4cb0d 100644
--- a/arch/arm/mach-msm/iommu.c
+++ b/arch/arm/mach-msm/iommu.c
@@ -33,6 +33,16 @@
 #include <mach/iommu_hw-8xxx.h>
 #include <mach/iommu.h>
 
+#define MRC(reg, processor, op1, crn, crm, op2)				\
+__asm__ __volatile__ (							\
+"   mrc   "   #processor "," #op1 ", %0,"  #crn "," #crm "," #op2 "\n"  \
+: "=r" (reg))
+
+#define RCP15_PRRR(reg)		MRC(reg, p15, 0, c10, c2, 0)
+#define RCP15_NMRR(reg)		MRC(reg, p15, 0, c10, c2, 1)
+
+static int msm_iommu_tex_class[4];
+
 DEFINE_SPINLOCK(msm_iommu_lock);
 
 struct msm_priv {
@@ -40,23 +50,26 @@ struct msm_priv {
 	struct list_head list_attached;
 };
 
-static void __flush_iotlb(struct iommu_domain *domain)
+static int __flush_iotlb(struct iommu_domain *domain)
 {
 	struct msm_priv *priv = domain->priv;
 	struct msm_iommu_drvdata *iommu_drvdata;
 	struct msm_iommu_ctx_drvdata *ctx_drvdata;
-
+	int ret = 0;
 #ifndef CONFIG_IOMMU_PGTABLES_L2
 	unsigned long *fl_table = priv->pgtable;
 	int i;
 
-	dmac_flush_range(fl_table, fl_table + SZ_16K);
+	if (!list_empty(&priv->list_attached)) {
+		dmac_flush_range(fl_table, fl_table + SZ_16K);
 
-	for (i = 0; i < NUM_FL_PTE; i++)
-		if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) {
-			void *sl_table = __va(fl_table[i] & FL_BASE_MASK);
-			dmac_flush_range(sl_table, sl_table + SZ_4K);
-		}
+		for (i = 0; i < NUM_FL_PTE; i++)
+			if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) {
+				void *sl_table = __va(fl_table[i] &
+								FL_BASE_MASK);
+				dmac_flush_range(sl_table, sl_table + SZ_4K);
+			}
+	}
 #endif
 
 	list_for_each_entry(ctx_drvdata, &priv->list_attached, attached_elm) {
@@ -66,6 +79,8 @@ static void __flush_iotlb(struct iommu_domain *domain)
 		iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent);
 		SET_CTX_TLBIALL(iommu_drvdata->base, ctx_drvdata->num, 0);
 	}
+
+	return ret;
 }
 
 static void __reset_context(void __iomem *base, int ctx)
@@ -95,6 +110,7 @@ static void __reset_context(void __iomem *base, int ctx)
 
 static void __program_context(void __iomem *base, int ctx, phys_addr_t pgtable)
 {
+	unsigned int prrr, nmrr;
 	__reset_context(base, ctx);
 
 	/* Set up HTW mode */
@@ -127,11 +143,11 @@ static void __program_context(void __iomem *base, int ctx, phys_addr_t pgtable)
 	/* Turn on TEX Remap */
 	SET_TRE(base, ctx, 1);
 
-	/* Do not configure PRRR / NMRR on the IOMMU for now. We will assume
-	 * TEX class 0 for everything until attributes are properly worked out
-	 */
-	SET_PRRR(base, ctx, 0);
-	SET_NMRR(base, ctx, 0);
+	/* Set TEX remap attributes */
+	RCP15_PRRR(prrr);
+	RCP15_NMRR(nmrr);
+	SET_PRRR(base, ctx, prrr);
+	SET_NMRR(base, ctx, nmrr);
 
 	/* Turn on BFB prefetch */
 	SET_BFBDFE(base, ctx, 1);
@@ -238,6 +254,11 @@ static int msm_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
 		goto fail;
 	}
 
+	if (!list_empty(&ctx_drvdata->attached_elm)) {
+		ret = -EBUSY;
+		goto fail;
+	}
+
 	list_for_each_entry(tmp_drvdata, &priv->list_attached, attached_elm)
 		if (tmp_drvdata == ctx_drvdata) {
 			ret = -EBUSY;
@@ -248,7 +269,7 @@ static int msm_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
 			  __pa(priv->pgtable));
 
 	list_add(&(ctx_drvdata->attached_elm), &priv->list_attached);
-	__flush_iotlb(domain);
+	ret = __flush_iotlb(domain);
 
 fail:
 	spin_unlock_irqrestore(&msm_iommu_lock, flags);
@@ -263,6 +284,7 @@ static void msm_iommu_detach_dev(struct iommu_domain *domain,
 	struct msm_iommu_drvdata *iommu_drvdata;
 	struct msm_iommu_ctx_drvdata *ctx_drvdata;
 	unsigned long flags;
+	int ret;
 
 	spin_lock_irqsave(&msm_iommu_lock, flags);
 	priv = domain->priv;
@@ -277,7 +299,10 @@ static void msm_iommu_detach_dev(struct iommu_domain *domain,
 	if (!iommu_drvdata || !ctx_drvdata || !ctx_dev)
 		goto fail;
 
-	__flush_iotlb(domain);
+	ret = __flush_iotlb(domain);
+	if (ret)
+		goto fail;
+
 	__reset_context(iommu_drvdata->base, ctx_dev->num);
 	list_del_init(&ctx_drvdata->attached_elm);
 
@@ -296,12 +321,21 @@ static int msm_iommu_map(struct iommu_domain *domain, unsigned long va,
 	unsigned long *sl_table;
 	unsigned long *sl_pte;
 	unsigned long sl_offset;
+	unsigned int pgprot;
 	size_t len = 0x1000UL << order;
-	int ret = 0;
+	int ret = 0, tex, sh;
 
 	spin_lock_irqsave(&msm_iommu_lock, flags);
-	priv = domain->priv;
 
+	sh = (prot & MSM_IOMMU_ATTR_SH) ? 1 : 0;
+	tex = msm_iommu_tex_class[prot & MSM_IOMMU_CP_MASK];
+
+	if (tex < 0 || tex > NUM_TEX_CLASS - 1) {
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	priv = domain->priv;
 	if (!priv) {
 		ret = -EINVAL;
 		goto fail;
@@ -322,6 +356,18 @@ static int msm_iommu_map(struct iommu_domain *domain, unsigned long va,
 		goto fail;
 	}
 
+	if (len == SZ_16M || len == SZ_1M) {
+		pgprot = sh ? FL_SHARED : 0;
+		pgprot |= tex & 0x01 ? FL_BUFFERABLE : 0;
+		pgprot |= tex & 0x02 ? FL_CACHEABLE : 0;
+		pgprot |= tex & 0x04 ? FL_TEX0 : 0;
+	} else	{
+		pgprot = sh ? SL_SHARED : 0;
+		pgprot |= tex & 0x01 ? SL_BUFFERABLE : 0;
+		pgprot |= tex & 0x02 ? SL_CACHEABLE : 0;
+		pgprot |= tex & 0x04 ? SL_TEX0 : 0;
+	}
+
 	fl_offset = FL_OFFSET(va);	/* Upper 12 bits */
 	fl_pte = fl_table + fl_offset;	/* int pointers, 4 bytes */
 
@@ -330,17 +376,17 @@ static int msm_iommu_map(struct iommu_domain *domain, unsigned long va,
 		for (i = 0; i < 16; i++)
 			*(fl_pte+i) = (pa & 0xFF000000) | FL_SUPERSECTION |
 				  FL_AP_READ | FL_AP_WRITE | FL_TYPE_SECT |
-				  FL_SHARED;
+				  FL_SHARED | pgprot;
 	}
 
 	if (len == SZ_1M)
 		*fl_pte = (pa & 0xFFF00000) | FL_AP_READ | FL_AP_WRITE |
-						FL_TYPE_SECT | FL_SHARED;
+					    FL_TYPE_SECT | FL_SHARED | pgprot;
 
 	/* Need a 2nd level table */
 	if ((len == SZ_4K || len == SZ_64K) && (*fl_pte) == 0) {
 		unsigned long *sl;
-		sl = (unsigned long *) __get_free_pages(GFP_KERNEL,
+		sl = (unsigned long *) __get_free_pages(GFP_ATOMIC,
 							get_order(SZ_4K));
 
 		if (!sl) {
@@ -360,17 +406,17 @@ static int msm_iommu_map(struct iommu_domain *domain, unsigned long va,
 
 	if (len == SZ_4K)
 		*sl_pte = (pa & SL_BASE_MASK_SMALL) | SL_AP0 | SL_AP1 |
-					  SL_SHARED | SL_TYPE_SMALL;
+					  SL_SHARED | SL_TYPE_SMALL | pgprot;
 
 	if (len == SZ_64K) {
 		int i;
 
 		for (i = 0; i < 16; i++)
 			*(sl_pte+i) = (pa & SL_BASE_MASK_LARGE) | SL_AP0 |
-					    SL_AP1 | SL_SHARED | SL_TYPE_LARGE;
+				SL_AP1 | SL_SHARED | SL_TYPE_LARGE | pgprot;
 	}
 
-	__flush_iotlb(domain);
+	ret = __flush_iotlb(domain);
 fail:
 	spin_unlock_irqrestore(&msm_iommu_lock, flags);
 	return ret;
@@ -455,7 +501,7 @@ static int msm_iommu_unmap(struct iommu_domain *domain, unsigned long va,
 		}
 	}
 
-	__flush_iotlb(domain);
+	ret = __flush_iotlb(domain);
 fail:
 	spin_unlock_irqrestore(&msm_iommu_lock, flags);
 	return ret;
@@ -490,9 +536,6 @@ static phys_addr_t msm_iommu_iova_to_phys(struct iommu_domain *domain,
 	SET_CTX_TLBIALL(base, ctx, 0);
 	SET_V2PPR_VA(base, ctx, va >> V2Pxx_VA_SHIFT);
 
-	if (GET_FAULT(base, ctx))
-		goto fail;
-
 	par = GET_PAR(base, ctx);
 
 	/* We are dealing with a supersection */
@@ -501,6 +544,9 @@ static phys_addr_t msm_iommu_iova_to_phys(struct iommu_domain *domain,
 	else	/* Upper 20 bits from PAR, lower 12 from VA */
 		ret = (par & 0xFFFFF000) | (va & 0x00000FFF);
 
+	if (GET_FAULT(base, ctx))
+		ret = 0;
+
 fail:
 	spin_unlock_irqrestore(&msm_iommu_lock, flags);
 	return ret;
@@ -543,8 +589,8 @@ irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id)
 {
 	struct msm_iommu_drvdata *drvdata = dev_id;
 	void __iomem *base;
-	unsigned int fsr = 0;
-	int ncb = 0, i = 0;
+	unsigned int fsr;
+	int ncb, i;
 
 	spin_lock(&msm_iommu_lock);
 
@@ -555,7 +601,6 @@ irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id)
 
 	base = drvdata->base;
 
-	pr_err("===== WOAH! =====\n");
 	pr_err("Unexpected IOMMU page fault!\n");
 	pr_err("base = %08x\n", (unsigned int) base);
 
@@ -585,8 +630,47 @@ static struct iommu_ops msm_iommu_ops = {
 	.domain_has_cap = msm_iommu_domain_has_cap
 };
 
-static int msm_iommu_init(void)
+static int __init get_tex_class(int icp, int ocp, int mt, int nos)
+{
+	int i = 0;
+	unsigned int prrr = 0;
+	unsigned int nmrr = 0;
+	int c_icp, c_ocp, c_mt, c_nos;
+
+	RCP15_PRRR(prrr);
+	RCP15_NMRR(nmrr);
+
+	for (i = 0; i < NUM_TEX_CLASS; i++) {
+		c_nos = PRRR_NOS(prrr, i);
+		c_mt = PRRR_MT(prrr, i);
+		c_icp = NMRR_ICP(nmrr, i);
+		c_ocp = NMRR_OCP(nmrr, i);
+
+		if (icp == c_icp && ocp == c_ocp && c_mt == mt && c_nos == nos)
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+static void __init setup_iommu_tex_classes(void)
+{
+	msm_iommu_tex_class[MSM_IOMMU_ATTR_NONCACHED] =
+			get_tex_class(CP_NONCACHED, CP_NONCACHED, MT_NORMAL, 1);
+
+	msm_iommu_tex_class[MSM_IOMMU_ATTR_CACHED_WB_WA] =
+			get_tex_class(CP_WB_WA, CP_WB_WA, MT_NORMAL, 1);
+
+	msm_iommu_tex_class[MSM_IOMMU_ATTR_CACHED_WB_NWA] =
+			get_tex_class(CP_WB_NWA, CP_WB_NWA, MT_NORMAL, 1);
+
+	msm_iommu_tex_class[MSM_IOMMU_ATTR_CACHED_WT] =
+			get_tex_class(CP_WT, CP_WT, MT_NORMAL, 1);
+}
+
+static int __init msm_iommu_init(void)
 {
+	setup_iommu_tex_classes();
 	register_iommu(&msm_iommu_ops);
 	return 0;
 }
diff --git a/arch/arm/mach-msm/iommu_dev.c b/arch/arm/mach-msm/iommu_dev.c
index 9019cee2907..b83c73b41fd 100644
--- a/arch/arm/mach-msm/iommu_dev.c
+++ b/arch/arm/mach-msm/iommu_dev.c
@@ -346,7 +346,7 @@ static struct platform_driver msm_iommu_ctx_driver = {
 	.remove		= msm_iommu_ctx_remove,
 };
 
-static int msm_iommu_driver_init(void)
+static int __init msm_iommu_driver_init(void)
 {
 	int ret;
 	ret = platform_driver_register(&msm_iommu_driver);
@@ -365,7 +365,7 @@ error:
 	return ret;
 }
 
-static void msm_iommu_driver_exit(void)
+static void __exit msm_iommu_driver_exit(void)
 {
 	platform_driver_unregister(&msm_iommu_ctx_driver);
 	platform_driver_unregister(&msm_iommu_driver);
diff --git a/arch/arm/mach-msm/sirc.c b/arch/arm/mach-msm/sirc.c
index b0794524ba6..152eefda3ce 100644
--- a/arch/arm/mach-msm/sirc.c
+++ b/arch/arm/mach-msm/sirc.c
@@ -40,9 +40,6 @@ static struct sirc_cascade_regs sirc_reg_table[] = {
 	}
 };
 
-static unsigned int save_type;
-static unsigned int save_polarity;
-
 /* Mask off the given interrupt. Keep the int_enable mask in sync with
    the enable reg, so it can be restored after power collapse. */
 static void sirc_irq_mask(unsigned int irq)
diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c
index f07dc7c738f..657be73297d 100644
--- a/arch/arm/mach-msm/smd.c
+++ b/arch/arm/mach-msm/smd.c
@@ -14,6 +14,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/fs.h>
@@ -89,7 +91,7 @@ static void smd_diag(void)
 	x = smem_find(ID_DIAG_ERR_MSG, SZ_DIAG_ERR_MSG);
 	if (x != 0) {
 		x[SZ_DIAG_ERR_MSG - 1] = 0;
-		pr_info("smem: DIAG '%s'\n", x);
+		pr_debug("DIAG '%s'\n", x);
 	}
 }
 
@@ -312,7 +314,7 @@ static void smd_state_change(struct smd_channel *ch,
 {
 	ch->last_state = next;
 
-	pr_info("SMD: ch %d %d -> %d\n", ch->n, last, next);
+	pr_debug("ch %d %d -> %d\n", ch->n, last, next);
 
 	switch (next) {
 	case SMD_SS_OPENING:
@@ -601,7 +603,7 @@ static int smd_alloc_channel(const char *name, uint32_t cid, uint32_t type)
 	ch->pdev.name = ch->name;
 	ch->pdev.id = -1;
 
-	pr_info("smd_alloc_channel() cid=%02d size=%05d '%s'\n",
+	pr_debug("smd_alloc_channel() cid=%02d size=%05d '%s'\n",
 		ch->n, ch->fifo_size, ch->name);
 
 	mutex_lock(&smd_creation_mutex);
@@ -621,7 +623,7 @@ static void smd_channel_probe_worker(struct work_struct *work)
 
 	shared = smem_find(ID_CH_ALLOC_TBL, sizeof(*shared) * 64);
 	if (!shared) {
-		pr_err("smd: cannot find allocation table\n");
+		pr_err("cannot find allocation table\n");
 		return;
 	}
 	for (n = 0; n < 64; n++) {
@@ -725,8 +727,6 @@ int smd_close(smd_channel_t *ch)
 {
 	unsigned long flags;
 
-	pr_info("smd_close(%p)\n", ch);
-
 	if (ch == 0)
 		return -1;
 
@@ -939,7 +939,6 @@ int smsm_set_sleep_duration(uint32_t delay)
 int smd_core_init(void)
 {
 	int r;
-	pr_info("smd_core_init()\n");
 
 	/* wait for essential items to be initialized */
 	for (;;) {
@@ -992,15 +991,11 @@ int smd_core_init(void)
 	smsm_change_state(SMSM_STATE_APPS_DEM, ~0, 0);
 #endif
 
-	pr_info("smd_core_init() done\n");
-
 	return 0;
 }
 
 static int __devinit msm_smd_probe(struct platform_device *pdev)
 {
-	pr_info("smd_init()\n");
-
 	/*
 	 * If we haven't waited for the ARM9 to boot up till now,
 	 * then we need to wait here. Otherwise this should just
diff --git a/arch/arm/mach-msm/smd_debug.c b/arch/arm/mach-msm/smd_debug.c
index f91c3b7bc65..8736afff82f 100644
--- a/arch/arm/mach-msm/smd_debug.c
+++ b/arch/arm/mach-msm/smd_debug.c
@@ -270,8 +270,10 @@ void smsm_print_sleep_info(void)
 {
 	unsigned long flags;
 	uint32_t *ptr;
+#ifndef CONFIG_ARCH_MSM_SCORPION
 	struct tramp_gpio_smem *gpio;
 	struct smsm_interrupt_info *int_info;
+#endif
 
 
 	spin_lock_irqsave(&smem_lock, flags);
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 950100f19d0..595be7fea31 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -137,7 +137,6 @@ static struct msm_clock msm_clocks[] = {
 			.rating         = 200,
 			.read           = msm_gpt_read,
 			.mask           = CLOCKSOURCE_MASK(32),
-			.shift          = 17,
 			.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 		},
 		.irq = {
@@ -164,7 +163,6 @@ static struct msm_clock msm_clocks[] = {
 			.rating         = 300,
 			.read           = msm_dgt_read,
 			.mask           = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
-			.shift          = 24 - MSM_DGT_SHIFT,
 			.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 		},
 		.irq = {
@@ -205,8 +203,7 @@ static void __init msm_timer_init(void)
 		ce->min_delta_ns = clockevent_delta2ns(4, ce);
 		ce->cpumask = cpumask_of(0);
 
-		cs->mult = clocksource_hz2mult(clock->freq, cs->shift);
-		res = clocksource_register(cs);
+		res = clocksource_register_hz(cs, clock->freq);
 		if (res)
 			printk(KERN_ERR "msm_timer_init: clocksource_register "
 			       "failed for %s\n", cs->name);
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
index 788bdace130..3eff39921d4 100644
--- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -65,7 +65,7 @@
  */
 #define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
 #define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
-#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1700)
+#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1570)
 
 #define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
 #define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index 354ac514eb8..84db2dfc475 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -54,7 +54,7 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
 	}
 	printk("\n");
 
-	while (*mpp_list) {
+	for ( ; *mpp_list; mpp_list++) {
 		unsigned int num = MPP_NUM(*mpp_list);
 		unsigned int sel = MPP_SEL(*mpp_list);
 		int shift, gpio_mode;
@@ -83,8 +83,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
 		if (sel != 0)
 			gpio_mode = 0;
 		orion_gpio_set_valid(num, gpio_mode);
-
-		mpp_list++;
 	}
 
 	printk(KERN_DEBUG "  final MPP regs:");
diff --git a/arch/arm/mach-mx25/Kconfig b/arch/arm/mach-mx25/Kconfig
deleted file mode 100644
index 38ca09a5df9..00000000000
--- a/arch/arm/mach-mx25/Kconfig
+++ /dev/null
@@ -1,34 +0,0 @@
-if ARCH_MX25
-
-comment "MX25 platforms:"
-
-config MACH_MX25_3DS
-	bool "Support MX25PDK (3DS) Platform"
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_ESDHC
-
-config MACH_EUKREA_CPUIMX25
-	bool "Support Eukrea CPUIMX25 Platform"
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_ESDHC
-	select MXC_ULPI if USB_ULPI
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX25
-	default MACH_EUKREA_MBIMXSD25_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD25_BASEBOARD
-	bool "Eukrea MBIMXSD development board"
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
-endif
diff --git a/arch/arm/mach-mx25/Makefile b/arch/arm/mach-mx25/Makefile
deleted file mode 100644
index d9e46ce00a4..00000000000
--- a/arch/arm/mach-mx25/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y				:= mm.o devices.o
-obj-$(CONFIG_ARCH_MX25)		+= clock.o
-obj-$(CONFIG_MACH_MX25_3DS)	+= mach-mx25_3ds.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX25)		+= mach-cpuimx25.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD)	+= eukrea_mbimxsd-baseboard.o
diff --git a/arch/arm/mach-mx25/Makefile.boot b/arch/arm/mach-mx25/Makefile.boot
deleted file mode 100644
index e1dd366f836..00000000000
--- a/arch/arm/mach-mx25/Makefile.boot
+++ /dev/null
@@ -1,3 +0,0 @@
-   zreladdr-y	:= 0x80008000
-params_phys-y	:= 0x80000100
-initrd_phys-y	:= 0x80800000
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
deleted file mode 100644
index 1d0eb3e8594..00000000000
--- a/arch/arm/mach-mx25/devices.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <mach/mx25.h>
-#include <mach/irqs.h>
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_otg_resources[] = {
-	{
-		.start = MX25_OTG_BASE_ADDR,
-		.end = MX25_OTG_BASE_ADDR + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 37,
-		.end = 37,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_otg = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-		.dma_mask = &otg_dmamask,
-	},
-	.resource = mxc_otg_resources,
-	.num_resources = ARRAY_SIZE(mxc_otg_resources),
-};
-
-/* OTG gadget device */
-struct platform_device otg_udc_device = {
-	.name = "fsl-usb2-udc",
-	.id   = -1,
-	.dev  = {
-		.dma_mask          = &otg_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.resource = mxc_otg_resources,
-	.num_resources = ARRAY_SIZE(mxc_otg_resources),
-};
-
-static u64 usbh2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh2_resources[] = {
-	{
-		.start = MX25_OTG_BASE_ADDR + 0x400,
-		.end = MX25_OTG_BASE_ADDR + 0x5ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 35,
-		.end = 35,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2 = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-		.dma_mask = &usbh2_dmamask,
-	},
-	.resource = mxc_usbh2_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-
-static struct resource mxc_pwm_resources0[] = {
-	{
-		.start	= 0x53fe0000,
-		.end	= 0x53fe3fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = 26,
-		.end     = 26,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_pwm_device0 = {
-	.name = "mxc_pwm",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_pwm_resources0),
-	.resource = mxc_pwm_resources0,
-};
-
-static struct resource mxc_pwm_resources1[] = {
-	{
-		.start	= 0x53fa0000,
-		.end	= 0x53fa3fff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = 36,
-		.end     = 36,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_pwm_device1 = {
-	.name = "mxc_pwm",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxc_pwm_resources1),
-	.resource = mxc_pwm_resources1,
-};
-
-static struct resource mxc_pwm_resources2[] = {
-	{
-		.start	= 0x53fa8000,
-		.end	= 0x53fabfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = 41,
-		.end     = 41,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_pwm_device2 = {
-	.name = "mxc_pwm",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_pwm_resources2),
-	.resource = mxc_pwm_resources2,
-};
-
-static struct resource mxc_keypad_resources[] = {
-	{
-		.start	= 0x43fa8000,
-		.end	= 0x43fabfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = 24,
-		.end     = 24,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_keypad_device = {
-	.name = "mxc-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(mxc_keypad_resources),
-	.resource = mxc_keypad_resources,
-};
-
-static struct resource mxc_pwm_resources3[] = {
-	{
-		.start	= 0x53fc8000,
-		.end	= 0x53fcbfff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start   = 42,
-		.end     = 42,
-		.flags   = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_pwm_device3 = {
-	.name = "mxc_pwm",
-	.id = 3,
-	.num_resources = ARRAY_SIZE(mxc_pwm_resources3),
-	.resource = mxc_pwm_resources3,
-};
-
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = (void __iomem *)MX25_GPIO1_BASE_ADDR_VIRT,
-		.irq = 52,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = (void __iomem *)MX25_GPIO2_BASE_ADDR_VIRT,
-		.irq = 51,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = (void __iomem *)MX25_GPIO3_BASE_ADDR_VIRT,
-		.irq = 16,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}, {
-		.chip.label = "gpio-3",
-		.base = (void __iomem *)MX25_GPIO4_BASE_ADDR_VIRT,
-		.irq = 23,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
-	}
-};
-
-int __init imx25_register_gpios(void)
-{
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
-
-static struct resource mx25_rtc_resources[] = {
-	{
-		.start	= MX25_DRYICE_BASE_ADDR,
-		.end	= MX25_DRYICE_BASE_ADDR + 0x40,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MX25_INT_DRYICE,
-		.flags	= IORESOURCE_IRQ
-	},
-};
-
-struct platform_device mx25_rtc_device = {
-	.name	= "imxdi_rtc",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(mx25_rtc_resources),
-	.resource	= mx25_rtc_resources,
-};
-
-static struct resource mx25_fb_resources[] = {
-	{
-		.start	= MX25_LCDC_BASE_ADDR,
-		.end	= MX25_LCDC_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MX25_INT_LCDC,
-		.end	= MX25_INT_LCDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx25_fb_device = {
-	.name		= "imx-fb",
-	.id		= 0,
-	.resource	= mx25_fb_resources,
-	.num_resources	= ARRAY_SIZE(mx25_fb_resources),
-	.dev		= {
-		.coherent_dma_mask = 0xFFFFFFFF,
-	},
-};
-
-static struct resource mxc_wdt_resources[] = {
-	{
-		.start = MX25_WDOG_BASE_ADDR,
-		.end = MX25_WDOG_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_wdt = {
-	.name = "imx2-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
-	.resource = mxc_wdt_resources,
-};
-
-static struct resource mx25_kpp_resources[] = {
-	{
-		.start	= MX25_KPP_BASE_ADDR,
-		.end	= MX25_KPP_BASE_ADDR + 0xf,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MX25_INT_KPP,
-		.end	= MX25_INT_KPP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx25_kpp_device = {
-	.name	= "imx-keypad",
-	.id	= -1,
-	.num_resources	= ARRAY_SIZE(mx25_kpp_resources),
-	.resource	= mx25_kpp_resources,
-};
-
-static struct resource mx25_csi_resources[] = {
-	{
-		.start	= MX25_CSI_BASE_ADDR,
-		.end	= MX25_CSI_BASE_ADDR + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= MX25_INT_CSI,
-		.flags	= IORESOURCE_IRQ
-	},
-};
-
-struct platform_device mx25_csi_device = {
-	.name	= "mx2-camera",
-	.id	= 0,
-	.num_resources	= ARRAY_SIZE(mx25_csi_resources),
-	.resource	= mx25_csi_resources,
-	.dev		= {
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
deleted file mode 100644
index 7b70a43c3a4..00000000000
--- a/arch/arm/mach-mx25/devices.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern struct platform_device mxc_otg;
-extern struct platform_device otg_udc_device;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_pwm_device0;
-extern struct platform_device mxc_pwm_device1;
-extern struct platform_device mxc_pwm_device2;
-extern struct platform_device mxc_pwm_device3;
-extern struct platform_device mxc_keypad_device;
-extern struct platform_device mx25_rtc_device;
-extern struct platform_device mx25_fb_device;
-extern struct platform_device mxc_wdt;
-extern struct platform_device mx25_kpp_device;
-extern struct platform_device mx25_csi_device;
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 5000ac1f93e..0717f887cba 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -1,21 +1,35 @@
 if ARCH_MX3
 
+# ARCH_MX31 and ARCH_MX35 are left for compatibility
+# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
+# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
+# more sensible) names are used: SOC_IMX31 and SOC_IMX35
 config ARCH_MX31
-	select ARCH_HAS_RNGA
-	select ARCH_MXC_AUDMUX_V2
 	bool
 
 config ARCH_MX35
 	bool
+
+config SOC_IMX31
+	bool
+	select IMX_HAVE_PLATFORM_MXC_RNGA
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_MX31
+	select MXC_AVIC
+
+config SOC_IMX35
+	bool
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select HAVE_EPIT
+	select ARCH_MX35
+	select MXC_AVIC
 
 comment "MX3 platforms:"
 
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
-	select ARCH_MX31
+	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -37,10 +51,15 @@ config MACH_MX31ADS_WM1133_EV1
 
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
-	select ARCH_MX31
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_MXC_W1
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm037 platform. This includes
@@ -57,9 +76,12 @@ config MACH_PCM037_EET
 
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
-	select ARCH_MX31
+	select SOC_IMX31
 	select MXC_ULPI if USB_ULPI
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
@@ -68,11 +90,16 @@ config MACH_MX31LITE
 
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
-	select ARCH_MX31
+	select SOC_IMX31
 	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -88,9 +115,12 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT
 
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
-	select ARCH_MX31
+	select SOC_IMX31
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
@@ -99,8 +129,10 @@ config MACH_MX31MOBOARD
 
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
-	select ARCH_MX31
+	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
 	help
@@ -109,7 +141,7 @@ config MACH_MX31LILLY
 
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
-	select ARCH_MX31
+	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
@@ -117,13 +149,16 @@ config MACH_QONG
 
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
-	select ARCH_MX35
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_ESDHC
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Phytec pcm043 platform. This includes
@@ -131,9 +166,11 @@ config MACH_PCM043
 
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
-	select ARCH_MX31
+	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
 	help
@@ -142,19 +179,21 @@ config MACH_ARMADILLO5X0
 
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
-	select ARCH_MX35
+	select SOC_IMX35
 	select MXC_DEBUG_BOARD
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_ESDHC
-	default n
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_KZM_ARM11_01
 	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
-	select ARCH_MX31
+	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
 	help
 	  Include support for KZM-ARM11-01. This includes specific
@@ -162,12 +201,15 @@ config MACH_KZM_ARM11_01
 
 config MACH_EUKREA_CPUIMX35
 	bool "Support Eukrea CPUIMX35 Platform"
-	select ARCH_MX35
-	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX35
+	select IMX_HAVE_PLATFORM_FLEXCAN
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_FLEXCAN
-	select IMX_HAVE_PLATFORM_ESDHC
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for Eukrea CPUIMX35 platform. This includes
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 8a182d0a3fc..8db13294ad2 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -5,17 +5,14 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
-CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
-obj-$(CONFIG_ARCH_MX31)		+= clock-imx31.o iomux-imx31.o
-obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
+obj-$(CONFIG_SOC_IMX31)		+= clock-imx31.o iomux-imx31.o
+obj-$(CONFIG_SOC_IMX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
 obj-$(CONFIG_MACH_PCM037)	+= mach-pcm037.o
 obj-$(CONFIG_MACH_PCM037_EET)	+= mach-pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mach-mx31_3ds.o
-CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o mx31moboard-smartbot.o
 obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c
index 109e98f323e..d423cac8cab 100644
--- a/arch/arm/mach-mx3/clock-imx31.c
+++ b/arch/arm/mach-mx3/clock-imx31.c
@@ -23,8 +23,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
 #include <asm/div64.h>
 
 #include <mach/clock.h>
@@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit2_clk)
@@ -615,7 +615,7 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	mx31_read_cpu_rev();
 
-	if (mx31_revision() >= MX31_CHIP_REV_2_0) {
+	if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */
 		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index 61e4a318980..448a038cd1e 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -21,8 +21,7 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
@@ -495,7 +494,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
index d00a7545781..d1d339576fd 100644
--- a/arch/arm/mach-mx3/cpu.c
+++ b/arch/arm/mach-mx3/cpu.c
@@ -25,15 +25,15 @@ struct mx3_cpu_type {
 };
 
 static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
-	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = MX3x_CHIP_REV_1_0 },
-	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = MX3x_CHIP_REV_1_1 },
-	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = MX3x_CHIP_REV_1_1 },
-	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
-	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = MX3x_CHIP_REV_1_1 },
-	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = MX3x_CHIP_REV_1_2 },
-	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = MX3x_CHIP_REV_1_2 },
-	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = MX3x_CHIP_REV_2_0 },
-	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = MX3x_CHIP_REV_2_0 },
+	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = IMX_CHIP_REVISION_1_0	},
+	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = IMX_CHIP_REVISION_1_1	},
+	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
+	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = IMX_CHIP_REVISION_1_2	},
+	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
+	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = IMX_CHIP_REVISION_2_0	},
 };
 
 void __init mx31_read_cpu_rev(void)
@@ -53,6 +53,8 @@ void __init mx31_read_cpu_rev(void)
 			return;
 		}
 
+	mx31_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+
 	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
 }
 
@@ -62,22 +64,25 @@ EXPORT_SYMBOL(mx35_cpu_rev);
 void __init mx35_read_cpu_rev(void)
 {
 	u32 rev;
-	char *srev = "unknown";
+	char *srev;
 
 	rev = __raw_readl(MX35_IO_ADDRESS(MX35_IIM_BASE_ADDR + MXC_IIMSREV));
 	switch (rev) {
 	case 0x00:
-		mx35_cpu_rev = MX3x_CHIP_REV_1_0;
+		mx35_cpu_rev = IMX_CHIP_REVISION_1_0;
 		srev = "1.0";
 		break;
 	case 0x10:
-		mx35_cpu_rev = MX3x_CHIP_REV_2_0;
+		mx35_cpu_rev = IMX_CHIP_REVISION_2_0;
 		srev = "2.0";
 		break;
 	case 0x11:
-		mx35_cpu_rev = MX3x_CHIP_REV_2_1;
+		mx35_cpu_rev = IMX_CHIP_REVISION_2_1;
 		srev = "2.1";
 		break;
+	default:
+		mx35_cpu_rev = IMX_CHIP_REVISION_UNKNOWN;
+		srev = "unknown";
 	}
 
 	printk(KERN_INFO "CPU identified as i.MX35, silicon rev %s\n", srev);
diff --git a/arch/arm/mach-mx3/devices-imx31.h b/arch/arm/mach-mx3/devices-imx31.h
index de9598590eb..40f4e848a67 100644
--- a/arch/arm/mach-mx3/devices-imx31.h
+++ b/arch/arm/mach-mx3/devices-imx31.h
@@ -9,6 +9,14 @@
 #include <mach/mx31.h>
 #include <mach/devices-common.h>
 
+extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst;
+#define imx31_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst;
+#define imx31_add_imx2_wdt(pdata)       \
+	imx_add_imx2_wdt(&imx31_imx2_wdt_data)
+
 extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
 #define imx31_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx31_imx_i2c_data[id], pdata)
@@ -16,6 +24,10 @@ extern const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst;
 #define imx31_add_imx_i2c1(pdata)	imx31_add_imx_i2c(1, pdata)
 #define imx31_add_imx_i2c2(pdata)	imx31_add_imx_i2c(2, pdata)
 
+extern const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst;
+#define imx31_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx31_imx_keypad_data, pdata)
+
 extern const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst;
 #define imx31_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx31_imx_ssi_data[id], pdata)
@@ -29,10 +41,25 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst;
 #define imx31_add_imx_uart3(pdata)	imx31_add_imx_uart(3, pdata)
 #define imx31_add_imx_uart4(pdata)	imx31_add_imx_uart(4, pdata)
 
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst;
+#define imx31_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx31_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst;
+#define imx31_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx31_mxc_ehci_hs_data[id - 1], pdata)
+
+extern const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst;
+#define imx31_add_mxc_mmc(id, pdata)	\
+	imx_add_mxc_mmc(&imx31_mxc_mmc_data[id], pdata)
+
 extern const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst;
 #define imx31_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx31_mxc_nand_data, pdata)
 
+extern const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst;
+#define imx31_add_mxc_w1(pdata)	\
+	imx_add_mxc_w1(&imx31_mxc_w1_data)
+
 extern const struct imx_spi_imx_data imx31_cspi_data[] __initconst;
 #define imx31_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
diff --git a/arch/arm/mach-mx3/devices-imx35.h b/arch/arm/mach-mx3/devices-imx35.h
index 5eb917b638d..677b18aa7ae 100644
--- a/arch/arm/mach-mx3/devices-imx35.h
+++ b/arch/arm/mach-mx3/devices-imx35.h
@@ -13,10 +13,19 @@ extern const struct imx_fec_data imx35_fec_data __initconst;
 #define imx35_add_fec(pdata)	\
 	imx_add_fec(&imx35_fec_data, pdata)
 
-#define imx35_add_flexcan0(pdata)	\
-	imx_add_flexcan(0, MX35_CAN1_BASE_ADDR, SZ_16K, MX35_INT_CAN1, pdata)
-#define imx35_add_flexcan1(pdata)	\
-	imx_add_flexcan(1, MX35_CAN2_BASE_ADDR, SZ_16K, MX35_INT_CAN2, pdata)
+extern const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst;
+#define imx35_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx35_fsl_usb2_udc_data, pdata)
+
+extern const struct imx_flexcan_data imx35_flexcan_data[] __initconst;
+#define imx35_add_flexcan(id, pdata)	\
+	imx_add_flexcan(&imx35_flexcan_data[id], pdata)
+#define imx35_add_flexcan0(pdata)	imx35_add_flexcan(0, pdata)
+#define imx35_add_flexcan1(pdata)	imx35_add_flexcan(1, pdata)
+
+extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst;
+#define imx35_add_imx2_wdt(pdata)       \
+	imx_add_imx2_wdt(&imx35_imx2_wdt_data)
 
 extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
 #define imx35_add_imx_i2c(id, pdata)	\
@@ -25,6 +34,10 @@ extern const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst;
 #define imx35_add_imx_i2c1(pdata)	imx35_add_imx_i2c(1, pdata)
 #define imx35_add_imx_i2c2(pdata)	imx35_add_imx_i2c(2, pdata)
 
+extern const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst;
+#define imx31_add_imx_keypad(pdata)	\
+	imx_add_imx_keypad(&imx35_imx_keypad_data, pdata)
+
 extern const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst;
 #define imx35_add_imx_ssi(id, pdata)    \
 	imx_add_imx_ssi(&imx35_imx_ssi_data[id], pdata)
@@ -36,16 +49,28 @@ extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst;
 #define imx35_add_imx_uart1(pdata)	imx35_add_imx_uart(1, pdata)
 #define imx35_add_imx_uart2(pdata)	imx35_add_imx_uart(2, pdata)
 
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst;
+#define imx35_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx35_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst;
+#define imx35_add_mxc_ehci_hs(pdata)	\
+	imx_add_mxc_ehci(&imx35_mxc_ehci_hs_data, pdata)
+
 extern const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst;
 #define imx35_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx35_mxc_nand_data, pdata)
 
+extern const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst;
+#define imx35_add_mxc_w1(pdata)	\
+	imx_add_mxc_w1(&imx35_mxc_w1_data)
+
+extern const struct imx_sdhci_esdhc_imx_data
+imx35_sdhci_esdhc_imx_data[] __initconst;
+#define imx35_add_sdhci_esdhc_imx(id, pdata)	\
+	imx_add_sdhci_esdhc_imx(&imx35_sdhci_esdhc_imx_data[id], pdata)
+
 extern const struct imx_spi_imx_data imx35_cspi_data[] __initconst;
 #define imx35_add_cspi(id, pdata)	\
 	imx_add_spi_imx(&imx35_cspi_data[id], pdata)
 #define imx35_add_spi_imx0(pdata)	imx35_add_cspi(0, pdata)
 #define imx35_add_spi_imx1(pdata)	imx35_add_cspi(1, pdata)
-
-extern const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst;
-#define imx35_add_esdhc(id, pdata)	\
-	imx_add_esdhc(&imx35_esdhc_data[id], pdata)
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index d4da9496089..b6672db788f 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -29,120 +29,25 @@
 
 #include "devices.h"
 
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
-	{
-		.chip.label = "gpio-0",
-		.base = IO_ADDRESS(GPIO1_BASE_ADDR),
-		.irq = MXC_INT_GPIO1,
-		.virtual_irq_start = MXC_GPIO_IRQ_START,
-	}, {
-		.chip.label = "gpio-1",
-		.base = IO_ADDRESS(GPIO2_BASE_ADDR),
-		.irq = MXC_INT_GPIO2,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
-	}, {
-		.chip.label = "gpio-2",
-		.base = IO_ADDRESS(GPIO3_BASE_ADDR),
-		.irq = MXC_INT_GPIO3,
-		.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
-	}
-};
-
-int __init imx3x_register_gpios(void)
-{
-	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
-
-static struct resource mxc_w1_master_resources[] = {
-	{
-		.start = OWIRE_BASE_ADDR,
-		.end   = OWIRE_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_w1_master_device = {
-	.name = "mxc_w1",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
-	.resource = mxc_w1_master_resources,
-};
-
-#ifdef CONFIG_ARCH_MX31
-static struct resource mxcsdhc0_resources[] = {
-	{
-		.start = MX31_MMC_SDHC1_BASE_ADDR,
-		.end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX31_INT_MMC_SDHC1,
-		.end = MX31_INT_MMC_SDHC1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource mxcsdhc1_resources[] = {
-	{
-		.start = MX31_MMC_SDHC2_BASE_ADDR,
-		.end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX31_INT_MMC_SDHC2,
-		.end = MX31_INT_MMC_SDHC2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxcsdhc_device0 = {
-	.name = "mxc-mmc",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxcsdhc0_resources),
-	.resource = mxcsdhc0_resources,
-};
-
-struct platform_device mxcsdhc_device1 = {
-	.name = "mxc-mmc",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
-	.resource = mxcsdhc1_resources,
-};
-
-static struct resource rnga_resources[] = {
-	{
-		.start = RNGA_BASE_ADDR,
-		.end = RNGA_BASE_ADDR + 0x28,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_rnga_device = {
-	.name = "mxc_rnga",
-	.id = -1,
-	.num_resources = 1,
-	.resource = rnga_resources,
-};
-#endif /* CONFIG_ARCH_MX31 */
-
 /* i.MX31 Image Processing Unit */
 
 /* The resource order is important! */
 static struct resource mx3_ipu_rsrc[] = {
 	{
-		.start = IPU_CTRL_BASE_ADDR,
-		.end = IPU_CTRL_BASE_ADDR + 0x5F,
+		.start = MX3x_IPU_CTRL_BASE_ADDR,
+		.end = MX3x_IPU_CTRL_BASE_ADDR + 0x5F,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = IPU_CTRL_BASE_ADDR + 0x88,
-		.end = IPU_CTRL_BASE_ADDR + 0xB3,
+		.start = MX3x_IPU_CTRL_BASE_ADDR + 0x88,
+		.end = MX3x_IPU_CTRL_BASE_ADDR + 0xB3,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_IPU_SYN,
-		.end = MXC_INT_IPU_SYN,
+		.start = MX3x_INT_IPU_SYN,
+		.end = MX3x_INT_IPU_SYN,
 		.flags = IORESOURCE_IRQ,
 	}, {
-		.start = MXC_INT_IPU_ERR,
-		.end = MXC_INT_IPU_ERR,
+		.start = MX3x_INT_IPU_ERR,
+		.end = MX3x_INT_IPU_ERR,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -156,8 +61,8 @@ struct platform_device mx3_ipu = {
 
 static struct resource fb_resources[] = {
 	{
-		.start	= IPU_CTRL_BASE_ADDR + 0xB4,
-		.end	= IPU_CTRL_BASE_ADDR + 0x1BF,
+		.start	= MX3x_IPU_CTRL_BASE_ADDR + 0xB4,
+		.end	= MX3x_IPU_CTRL_BASE_ADDR + 0x1BF,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -174,8 +79,8 @@ struct platform_device mx3_fb = {
 
 static struct resource camera_resources[] = {
 	{
-		.start	= IPU_CTRL_BASE_ADDR + 0x60,
-		.end	= IPU_CTRL_BASE_ADDR + 0x87,
+		.start	= MX3x_IPU_CTRL_BASE_ADDR + 0x60,
+		.end	= MX3x_IPU_CTRL_BASE_ADDR + 0x87,
 		.flags	= IORESOURCE_MEM,
 	},
 };
@@ -190,110 +95,6 @@ struct platform_device mx3_camera = {
 	},
 };
 
-static struct resource otg_resources[] = {
-	{
-		.start	= MX31_OTG_BASE_ADDR,
-		.end	= MX31_OTG_BASE_ADDR + 0x1ff,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= MXC_INT_USB3,
-		.end	= MXC_INT_USB3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-/* OTG gadget device */
-struct platform_device mxc_otg_udc_device = {
-	.name		= "fsl-usb2-udc",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &otg_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= otg_resources,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-};
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-		.dma_mask = &otg_dmamask,
-	},
-	.resource = otg_resources,
-	.num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = ~(u32)0;
-
-static struct resource mxc_usbh1_resources[] = {
-	{
-		.start = MX31_OTG_BASE_ADDR + 0x200,
-		.end = MX31_OTG_BASE_ADDR + 0x3ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_USB1,
-		.end = MXC_INT_USB1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh1 = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-		.dma_mask = &usbh1_dmamask,
-	},
-	.resource = mxc_usbh1_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-/* USB host 2 */
-static u64 usbh2_dmamask = ~(u32)0;
-
-static struct resource mxc_usbh2_resources[] = {
-	{
-		.start = MX31_OTG_BASE_ADDR + 0x400,
-		.end = MX31_OTG_BASE_ADDR + 0x5ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MXC_INT_USB2,
-		.end = MXC_INT_USB2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2 = {
-	.name = "mxc-ehci",
-	.id = 2,
-	.dev = {
-		.coherent_dma_mask = 0xffffffff,
-		.dma_mask = &usbh2_dmamask,
-	},
-	.resource = mxc_usbh2_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-
-static struct resource imx_wdt_resources[] = {
-	{
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device imx_wdt_device0 = {
-	.name           = "imx2-wdt",
-	.id             = 0,
-	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
-	.resource       = imx_wdt_resources,
-};
-
 static struct resource imx_rtc_resources[] = {
 	{
 		.start  = MX31_RTC_BASE_ADDR,
@@ -312,51 +113,3 @@ struct platform_device imx_rtc_device0 = {
 	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
 	.resource       = imx_rtc_resources,
 };
-
-static struct resource imx_kpp_resources[] = {
-	{
-		.start	= MX3x_KPP_BASE_ADDR,
-		.end	= MX3x_KPP_BASE_ADDR + 0xf,
-		.flags	= IORESOURCE_MEM
-	}, {
-		.start	= MX3x_INT_KPP,
-		.end	= MX3x_INT_KPP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device imx_kpp_device = {
-	.name = "imx-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(imx_kpp_resources),
-	.resource = imx_kpp_resources,
-};
-
-static int __init mx3_devices_init(void)
-{
-#if defined(CONFIG_ARCH_MX31)
-	if (cpu_is_mx31()) {
-		imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR;
-		imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff;
-		mxc_register_device(&mxc_rnga_device, NULL);
-	}
-#endif
-#if defined(CONFIG_ARCH_MX35)
-	if (cpu_is_mx35()) {
-		otg_resources[0].start = MX35_OTG_BASE_ADDR;
-		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
-		otg_resources[1].start = MXC_INT_USBOTG;
-		otg_resources[1].end = MXC_INT_USBOTG;
-		mxc_usbh1_resources[0].start = MX35_OTG_BASE_ADDR + 0x400;
-		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
-		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
-		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
-		imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR;
-		imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff;
-	}
-#endif
-
-	return 0;
-}
-
-subsys_initcall(mx3_devices_init);
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index 585f814473d..121962c568d 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -1,14 +1,4 @@
-extern struct platform_device mxc_w1_master_device;
 extern struct platform_device mx3_ipu;
 extern struct platform_device mx3_fb;
 extern struct platform_device mx3_camera;
-extern struct platform_device mxcsdhc_device0;
-extern struct platform_device mxcsdhc_device1;
-extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_wdt_device0;
 extern struct platform_device imx_rtc_device0;
-extern struct platform_device imx_kpp_device;
diff --git a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
index 1abc10d5292..14a5ffc939a 100644
--- a/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx3/eukrea_mbimxsd-baseboard.c
@@ -111,7 +111,7 @@ static struct mx3fb_platform_data mx3fb_pdata = {
 	.num_modes	= ARRAY_SIZE(fb_modedb),
 };
 
-static struct pad_desc eukrea_mbimxsd_pads[] = {
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* LCD */
 	MX35_PAD_LD0__IPU_DISPB_DAT_0,
 	MX35_PAD_LD1__IPU_DISPB_DAT_1,
@@ -289,7 +289,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
 	imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_esdhc(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c
index aaa30fe18f8..28b6f414b5d 100644
--- a/arch/arm/mach-mx3/mach-armadillo5x0.c
+++ b/arch/arm/mach-mx3/mach-armadillo5x0.c
@@ -49,10 +49,8 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
-#include <mach/mmc.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
@@ -245,13 +243,13 @@ h2_free_cs:
 	return err;
 }
 
-static struct mxc_usbh_platform_data usbotg_pdata = {
+static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
 	.init	= usbotg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
@@ -453,7 +451,7 @@ static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
 	gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
 }
 
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.get_ro = armadillo5x0_sdhc1_get_ro,
 	.init = armadillo5x0_sdhc1_init,
 	.exit = armadillo5x0_sdhc1_exit,
@@ -520,7 +518,7 @@ static void __init armadillo5x0_init(void)
 	gpio_direction_input(MX31_PIN_GPIO1_0);
 
 	/* Register SDHC */
-	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
 
 	/* Register FB */
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
@@ -555,8 +553,8 @@ static void __init armadillo5x0_init(void)
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_otg_host, &usbotg_pdata);
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx31_add_mxc_ehci_otg(&usbotg_pdata);
+	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 #endif
 }
 
diff --git a/arch/arm/mach-mx3/mach-cpuimx35.c b/arch/arm/mach-mx3/mach-cpuimx35.c
index 9fde873f588..26ae90f0258 100644
--- a/arch/arm/mach-mx3/mach-cpuimx35.c
+++ b/arch/arm/mach-mx3/mach-cpuimx35.c
@@ -30,7 +30,6 @@
 #include <linux/i2c/tsc2007.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
 #include <linux/i2c-gpio.h>
 
 #include <asm/mach-types.h>
@@ -43,7 +42,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
 #include <mach/mxc_nand.h>
-#include <mach/mxc_ehci.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -74,11 +72,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 	},
 };
 
-static struct platform_device *devices[] __initdata = {
-	&imx_wdt_device0,
-};
-
-static struct pad_desc eukrea_cpuimx35_pads[] = {
+static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
 	/* UART1 */
 	MX35_PAD_CTS1__UART1_CTS,
 	MX35_PAD_RTS1__UART1_RTS,
@@ -117,18 +111,18 @@ static const struct mxc_nand_platform_data
 	.flash_bbt	= 1,
 };
 
-static struct mxc_usbh_platform_data __maybe_unused otg_pdata = {
+static const struct mxc_usbh_platform_data otg_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data __maybe_unused usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_SERIAL,
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
 };
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI,
 	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
@@ -158,7 +152,7 @@ static void __init mxc_board_init(void)
 			ARRAY_SIZE(eukrea_cpuimx35_pads));
 
 	imx35_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx35_add_imx2_wdt(NULL);
 
 	imx35_add_imx_uart0(&uart_pdata);
 	imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info);
@@ -168,11 +162,11 @@ static void __init mxc_board_init(void)
 	imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data);
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
+		imx35_add_mxc_ehci_otg(&otg_pdata);
 	else
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
-	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	imx35_add_mxc_ehci_hs(&usbh1_pdata);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD
 	eukrea_mbimxsd35_baseboard_init();
diff --git a/arch/arm/mach-mx3/mach-kzm_arm11_01.c b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
index 042cd5655e1..a5f3eb24e4d 100644
--- a/arch/arm/mach-mx3/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-mx3/mach-kzm_arm11_01.c
@@ -41,9 +41,9 @@
 #include "devices-imx31.h"
 #include "devices.h"
 
-#define KZM_ARM11_IO_ADDRESS(x) (					\
-	IMX_IO_ADDRESS(x, MX31_CS4) ?:					\
-	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
+#define KZM_ARM11_IO_ADDRESS(x) (IOMEM(					\
+	IMX_IO_P2V_MODULE(x, MX31_CS4) ?:				\
+	IMX_IO_P2V_MODULE(x, MX31_CS5)) ?:				\
 	MX31_IO_ADDRESS(x))
 
 /*
diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c
index 0ad9e782108..4e516b49a90 100644
--- a/arch/arm/mach-mx3/mach-mx31_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx31_3ds.c
@@ -22,8 +22,8 @@
 #include <linux/mfd/mc13783.h>
 #include <linux/spi/spi.h>
 #include <linux/regulator/machine.h>
-#include <linux/fsl_devices.h>
-#include <linux/input/matrix_keypad.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -34,6 +34,7 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/3ds_debugboard.h>
+#include <mach/ulpi.h>
 
 #include "devices-imx31.h"
 #include "devices.h"
@@ -84,6 +85,21 @@ static int mx31_3ds_pins[] = {
 	MX31_PIN_KEY_COL1_KEY_COL1,
 	MX31_PIN_KEY_COL2_KEY_COL2,
 	MX31_PIN_KEY_COL3_KEY_COL3,
+	/* USB Host 2 */
+	IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
+	IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_IOIS16, IOMUX_CONFIG_ALT1),
+	IOMUX_MODE(MX31_PIN_PC_RW_B, IOMUX_CONFIG_ALT1),
+	/* USB Host2 reset */
+	IOMUX_MODE(MX31_PIN_USB_BYP, IOMUX_CONFIG_GPIO),
 };
 
 /*
@@ -102,7 +118,7 @@ static const uint32_t mx31_3ds_keymap[] = {
 	KEY(2, 3, KEY_F10),
 };
 
-static struct matrix_keymap_data mx31_3ds_keymap_data = {
+static const struct matrix_keymap_data mx31_3ds_keymap_data __initconst = {
 	.keymap		= mx31_3ds_keymap,
 	.keymap_size	= ARRAY_SIZE(mx31_3ds_keymap),
 };
@@ -115,6 +131,13 @@ static struct regulator_init_data pwgtx_init = {
 	},
 };
 
+static struct regulator_init_data gpo_init = {
+	.constraints = {
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
 static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
 	{
 		.id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */
@@ -122,6 +145,13 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
 	}, {
 		.id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */
 		.init_data = &pwgtx_init,
+	}, {
+
+		.id = MC13783_REGU_GPO1, /* Turn on 1.8V */
+		.init_data = &gpo_init,
+	}, {
+		.id = MC13783_REGU_GPO3, /* Turn on 3.3V */
+		.init_data = &gpo_init,
 	},
 };
 
@@ -129,7 +159,7 @@ static struct mc13783_regulator_init_data mx31_3ds_regulators[] = {
 static struct mc13783_platform_data mc13783_pdata __initdata = {
 	.regulators = mx31_3ds_regulators,
 	.num_regulators = ARRAY_SIZE(mx31_3ds_regulators),
-	.flags  = MC13783_USE_REGULATOR,
+	.flags  = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN,
 };
 
 /* SPI */
@@ -175,6 +205,7 @@ mx31_3ds_nand_board_info __initconst = {
 		     PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
 #define USBOTG_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_PWR)
+#define USBH2_RST_B IOMUX_TO_GPIO(MX31_PIN_USB_BYP)
 
 static int mx31_3ds_usbotg_init(void)
 {
@@ -214,11 +245,77 @@ usbotg_free_reset:
 	return err;
 }
 
-static struct fsl_usb2_platform_data usbotg_pdata = {
+static int mx31_3ds_host2_init(struct platform_device *pdev)
+{
+	int err;
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_VS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_BVD1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_BVD2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_RST, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_IOIS16, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_PC_RW_B, USB_PAD_CFG);
+
+	err = gpio_request(USBH2_RST_B, "usbh2-reset");
+	if (err) {
+		pr_err("Failed to request the USB Host 2 reset gpio\n");
+		return err;
+	}
+
+	err = gpio_direction_output(USBH2_RST_B, 0);
+	if (err) {
+		pr_err("Failed to drive the USB Host 2 reset gpio\n");
+		goto usbotg_free_reset;
+	}
+
+	mdelay(1);
+	gpio_set_value(USBH2_RST_B, 1);
+	return 0;
+
+usbotg_free_reset:
+	gpio_free(USBH2_RST_B);
+	return err;
+}
+
+#if defined(CONFIG_USB_ULPI)
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
+	.init = mx31_3ds_host2_init,
+	.portsc	= MXC_EHCI_MODE_ULPI,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+#endif
+
+static const struct fsl_usb2_platform_data usbotg_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+static int otg_mode_host;
+
+static int __init mx31_3ds_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", mx31_3ds_otg_mode);
+
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -246,14 +343,27 @@ static void __init mxc_board_init(void)
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
-	mxc_register_device(&imx_kpp_device, &mx31_3ds_keymap_data);
+	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
 
 	mx31_3ds_usbotg_init();
-	mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
+#if defined(CONFIG_USB_ULPI)
+	if (otg_mode_host) {
+		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+
+		imx31_add_mxc_ehci_otg(&otg_pdata);
+	}
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+#endif
+	if (!otg_mode_host)
+		imx31_add_fsl_usb2_udc(&usbotg_pdata);
 
 	if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
 		printk(KERN_WARNING "Init of the debug board failed, all "
 				    "devices on the debug board are unusable.\n");
+	imx31_add_imx2_wdt(NULL);
 }
 
 static void __init mx31_3ds_timer_init(void)
diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c
index 42f47faa6fd..2c595483f35 100644
--- a/arch/arm/mach-mx3/mach-mx31lilly.c
+++ b/arch/arm/mach-mx3/mach-mx31lilly.c
@@ -42,7 +42,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
@@ -230,13 +229,13 @@ static struct mxc_usbh_platform_data usbotg_pdata = {
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 	.init	= usbh1_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
@@ -249,8 +248,8 @@ static void lilly1131_usb_init(void)
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 }
 
 #else
diff --git a/arch/arm/mach-mx3/mach-mx31lite.c b/arch/arm/mach-mx3/mach-mx31lite.c
index b93895814cd..9e64c66396e 100644
--- a/arch/arm/mach-mx3/mach-mx31lite.c
+++ b/arch/arm/mach-mx3/mach-mx31lite.c
@@ -40,7 +40,6 @@
 #include <mach/board-mx31lite.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
@@ -171,7 +170,7 @@ static int usbh2_init(struct platform_device *pdev)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init   = usbh2_init,
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
@@ -258,7 +257,7 @@ static void __init mxc_board_init(void)
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 #endif
 
 	/* SMSC9117 IRQ pin */
diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c
index eb5f426df22..203d21a510a 100644
--- a/arch/arm/mach-mx3/mach-mx31moboard.c
+++ b/arch/arm/mach-mx3/mach-mx31moboard.c
@@ -40,8 +40,6 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
 #include <mach/mx3_camera.h>
 #include <mach/spi.h>
 #include <mach/ulpi.h>
@@ -170,11 +168,11 @@ static const struct spi_imx_master moboard_spi1_pdata __initconst = {
 
 static struct regulator_consumer_supply sdhc_consumers[] = {
 	{
-		.dev	= &mxcsdhc_device0.dev,
+		.dev_name = "mxc-mmc.0",
 		.supply	= "sdhc0_vcc",
 	},
 	{
-		.dev	= &mxcsdhc_device1.dev,
+		.dev_name = "mxc-mmc.1",
 		.supply	= "sdhc1_vcc",
 	},
 };
@@ -345,7 +343,7 @@ static void moboard_sdhc1_exit(struct device *dev, void *data)
 	gpio_free(SDHC1_CD);
 }
 
-static struct imxmmc_platform_data sdhc1_pdata = {
+static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
 	.get_ro	= moboard_sdhc1_get_ro,
 	.init	= moboard_sdhc1_init,
 	.exit	= moboard_sdhc1_exit,
@@ -404,17 +402,23 @@ static void usb_xcvr_reset(void)
 
 #if defined(CONFIG_USB_ULPI)
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static int __init moboard_usbh2_init(void)
 {
+	struct platform_device *pdev;
+
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	pdev = imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
 }
 #else
 static inline int moboard_usbh2_init(void) { return 0; }
@@ -520,7 +524,7 @@ static void __init mxc_board_init(void)
 	spi_register_board_info(moboard_spi_board_info,
 		ARRAY_SIZE(moboard_spi_board_info));
 
-	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+	imx31_add_mxc_mmc(0, &sdhc1_pdata);
 
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c
index b66a75aa2e8..b1963f257c2 100644
--- a/arch/arm/mach-mx3/mach-mx35_3ds.c
+++ b/arch/arm/mach-mx3/mach-mx35_3ds.c
@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/memory.h>
 #include <linux/gpio.h>
-#include <linux/fsl_devices.h>
+#include <linux/usb/otg.h>
 
 #include <linux/mtd/physmap.h>
 
@@ -40,7 +40,6 @@
 #include <mach/iomux-mx35.h>
 #include <mach/irqs.h>
 #include <mach/3ds_debugboard.h>
-#include <mach/mxc_ehci.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
@@ -81,7 +80,7 @@ static struct platform_device *devices[] __initdata = {
 	&mx35pdk_flash,
 };
 
-static struct pad_desc mx35pdk_pads[] = {
+static iomux_v3_cfg_t mx35pdk_pads[] = {
 	/* UART1 */
 	MX35_PAD_CTS1__UART1_CTS,
 	MX35_PAD_RTS1__UART1_RTS,
@@ -122,18 +121,38 @@ static struct pad_desc mx35pdk_pads[] = {
 };
 
 /* OTG config */
-static struct fsl_usb2_platform_data usb_otg_pdata = {
+static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
+	.portsc	= MXC_EHCI_MODE_UTMI,
+	.flags	= MXC_EHCI_INTERNAL_PHY,
+};
+
 /* USB HOST config */
-static struct mxc_usbh_platform_data usb_host_pdata = {
+static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
 	.portsc		= MXC_EHCI_MODE_SERIAL,
 	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
 			  MXC_EHCI_INTERNAL_PHY,
 };
 
+static int otg_mode_host;
+
+static int __init mx35_3ds_otg_mode(char *options)
+{
+	if (!strcmp(options, "host"))
+		otg_mode_host = 1;
+	else if (!strcmp(options, "device"))
+		otg_mode_host = 0;
+	else
+		pr_info("otg_mode neither \"host\" nor \"device\". "
+			"Defaulting to device\n");
+	return 0;
+}
+__setup("otg_mode=", mx35_3ds_otg_mode);
+
 /*
  * Board specific initialization.
  */
@@ -142,16 +161,21 @@ static void __init mxc_board_init(void)
 	mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
 
 	imx35_add_fec(NULL);
+	imx35_add_imx2_wdt(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	imx35_add_imx_uart0(&uart_pdata);
 
-	mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata);
+	if (otg_mode_host)
+		imx35_add_mxc_ehci_otg(&otg_pdata);
+
+	imx35_add_mxc_ehci_hs(&usb_host_pdata);
 
-	mxc_register_device(&mxc_usbh1, &usb_host_pdata);
+	if (!otg_mode_host)
+		imx35_add_fsl_usb2_udc(&usb_otg_pdata);
 
 	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
-	imx35_add_esdhc(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
 
 	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
 		pr_warn("Init of the debugboard failed, all "
diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c
index 2ff3f661a48..b752f6bc20a 100644
--- a/arch/arm/mach-mx3/mach-pcm037.c
+++ b/arch/arm/mach-mx3/mach-pcm037.c
@@ -27,7 +27,6 @@
 #include <linux/delay.h>
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
-#include <linux/fsl_devices.h>
 #include <linux/can/platform/sja1000.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -43,10 +42,8 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 #include <mach/ipu.h>
-#include <mach/mmc.h>
 #include <mach/mx3_camera.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
@@ -399,7 +396,7 @@ static void pcm970_sdhc1_exit(struct device *dev, void *data)
 	gpio_free(SDHC1_GPIO_WP);
 }
 
-static struct imxmmc_platform_data sdhc_pdata = {
+static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 #ifdef PCM970_SDHC_RW_SWITCH
 	.get_ro = pcm970_sdhc1_get_ro,
 #endif
@@ -441,7 +438,6 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
-	&imx_wdt_device0,
 	&pcm037_mt9t031,
 	&pcm037_mt9v022,
 };
@@ -538,18 +534,18 @@ static struct platform_device pcm970_sja1000 = {
 };
 
 #if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh2_pdata = {
+static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_ULPI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 #endif
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_ULPI,
 };
@@ -607,12 +603,13 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	imx31_add_imx2_wdt(NULL);
 	imx31_add_imx_uart0(&uart_pdata);
 	/* XXX: should't this have .flags = 0 (i.e. no RTSCTS) on PCM037_EET? */
 	imx31_add_imx_uart1(&uart_pdata);
 	imx31_add_imx_uart2(&uart_pdata);
 
-	mxc_register_device(&mxc_w1_master_device, NULL);
+	imx31_add_mxc_w1(NULL);
 
 	/* LAN9217 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
@@ -632,7 +629,7 @@ static void __init mxc_board_init(void)
 	imx31_add_imx_i2c2(&pcm037_i2c2_data);
 
 	imx31_add_mxc_nand(&pcm037_nand_board_info);
-	mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+	imx31_add_mxc_mmc(0, &sdhc_pdata);
 	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
 	mxc_register_device(&mx3_fb, &mx3fb_pdata);
 
@@ -654,16 +651,16 @@ static void __init mxc_board_init(void)
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
+		imx31_add_mxc_ehci_otg(&otg_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+	imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 #endif
 	if (!otg_mode_host)
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+		imx31_add_fsl_usb2_udc(&otg_device_pdata);
 
 }
 
diff --git a/arch/arm/mach-mx3/mach-pcm037_eet.c b/arch/arm/mach-mx3/mach-pcm037_eet.c
index 99e0894e07d..fda56545d2f 100644
--- a/arch/arm/mach-mx3/mach-pcm037_eet.c
+++ b/arch/arm/mach-mx3/mach-pcm037_eet.c
@@ -14,6 +14,7 @@
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
+#include <mach/spi.h>
 
 #include <asm/mach-types.h>
 
@@ -59,14 +60,12 @@ static struct spi_board_info pcm037_spi_dev[] = {
 };
 
 /* Platform Data for MXC CSPI */
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
 static int pcm037_spi1_cs[] = {MXC_SPI_CS(1), IOMUX_TO_GPIO(MX31_PIN_KEY_COL7)};
 
 static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
 	.chipselect = pcm037_spi1_cs,
 	.num_chipselect = ARRAY_SIZE(pcm037_spi1_cs),
 };
-#endif
 
 /* GPIO-keys input device */
 static struct gpio_keys_button pcm037_gpio_keys[] = {
@@ -171,7 +170,7 @@ static struct platform_device pcm037_gpio_keys_device = {
 	},
 };
 
-static int eet_init_devices(void)
+static int __init eet_init_devices(void)
 {
 	if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
 		return 0;
diff --git a/arch/arm/mach-mx3/mach-pcm043.c b/arch/arm/mach-mx3/mach-pcm043.c
index 4e1de87995d..bcf83fc7e70 100644
--- a/arch/arm/mach-mx3/mach-pcm043.c
+++ b/arch/arm/mach-mx3/mach-pcm043.c
@@ -27,7 +27,6 @@
 #include <linux/i2c/at24.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -39,7 +38,6 @@
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 #include <mach/audmux.h>
 
@@ -140,10 +138,9 @@ static struct i2c_board_info pcm043_i2c_devices[] = {
 
 static struct platform_device *devices[] __initdata = {
 	&pcm043_flash,
-	&imx_wdt_device0,
 };
 
-static struct pad_desc pcm043_pads[] = {
+static iomux_v3_cfg_t pcm043_pads[] = {
 	/* UART1 */
 	MX35_PAD_CTS1__UART1_CTS,
 	MX35_PAD_RTS1__UART1_RTS,
@@ -230,8 +227,8 @@ static struct pad_desc pcm043_pads[] = {
 
 static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 {
-	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
 	int ret;
 
 	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
@@ -240,7 +237,7 @@ static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 		return;
 	}
 
-	mxc_iomux_v3_setup_pad(&txfs_gpio);
+	mxc_iomux_v3_setup_pad(txfs_gpio);
 
 	/* warm reset */
 	gpio_direction_output(AC97_GPIO_TXFS, 1);
@@ -248,16 +245,16 @@ static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
 	gpio_set_value(AC97_GPIO_TXFS, 0);
 
 	gpio_free(AC97_GPIO_TXFS);
-	mxc_iomux_v3_setup_pad(&txfs);
+	mxc_iomux_v3_setup_pad(txfs);
 }
 
 static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
 {
-	struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
-	struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
-	struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
-	struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
-	struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
+	iomux_v3_cfg_t txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
+	iomux_v3_cfg_t txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
+	iomux_v3_cfg_t txd_gpio = MX35_PAD_STXD4__GPIO2_28;
+	iomux_v3_cfg_t txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
+	iomux_v3_cfg_t reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
 	int ret;
 
 	ret = gpio_request(AC97_GPIO_TXFS, "SSI");
@@ -272,9 +269,9 @@ static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
 	if (ret)
 		goto err3;
 
-	mxc_iomux_v3_setup_pad(&txfs_gpio);
-	mxc_iomux_v3_setup_pad(&txd_gpio);
-	mxc_iomux_v3_setup_pad(&reset_gpio);
+	mxc_iomux_v3_setup_pad(txfs_gpio);
+	mxc_iomux_v3_setup_pad(txd_gpio);
+	mxc_iomux_v3_setup_pad(reset_gpio);
 
 	gpio_direction_output(AC97_GPIO_TXFS, 0);
 	gpio_direction_output(AC97_GPIO_TXD, 0);
@@ -284,8 +281,8 @@ static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
 	udelay(10);
 	gpio_direction_output(AC97_GPIO_RESET, 1);
 
-	mxc_iomux_v3_setup_pad(&txd);
-	mxc_iomux_v3_setup_pad(&txfs);
+	mxc_iomux_v3_setup_pad(txd);
+	mxc_iomux_v3_setup_pad(txfs);
 
 	gpio_free(AC97_GPIO_RESET);
 err3:
@@ -311,19 +308,19 @@ pcm037_nand_board_info __initconst = {
 };
 
 #if defined(CONFIG_USB_ULPI)
-static struct mxc_usbh_platform_data otg_pdata = {
+static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.portsc	= MXC_EHCI_MODE_UTMI,
 	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
 };
 
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
 	.portsc	= MXC_EHCI_MODE_SERIAL,
 	.flags	= MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
 		  MXC_EHCI_IPPUE_DOWN,
 };
 #endif
 
-static struct fsl_usb2_platform_data otg_device_pdata = {
+static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
 	.phy_mode       = FSL_USB2_PHY_UTMI,
 };
@@ -364,6 +361,7 @@ static void __init mxc_board_init(void)
 
 	imx35_add_fec(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	imx35_add_imx2_wdt(NULL);
 
 	imx35_add_imx_uart0(&uart_pdata);
 	imx35_add_mxc_nand(&pcm037_nand_board_info);
@@ -386,16 +384,16 @@ static void __init mxc_board_init(void)
 		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
+		imx35_add_mxc_ehci_otg(&otg_pdata);
 	}
 
-	mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	imx35_add_mxc_ehci_hs(&usbh1_pdata);
 #endif
 	if (!otg_mode_host)
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
+		imx35_add_fsl_usb2_udc(&otg_device_pdata);
 
 	imx35_add_flexcan1(NULL);
-	imx35_add_esdhc(0, NULL);
+	imx35_add_sdhci_esdhc_imx(0, NULL);
 }
 
 static void __init pcm043_timer_init(void)
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index b4ffc531a82..47118f76024 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -36,40 +36,16 @@
  * @ingroup Memory
  */
 
-/*!
- * This table defines static virtual address mappings for I/O regions.
- * These are the mappings common across all MX3 boards.
- */
-static struct map_desc mxc_io_desc[] __initdata = {
-	{
-		.virtual	= X_MEMC_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(X_MEMC_BASE_ADDR),
-		.length		= X_MEMC_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= AVIC_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AVIC_BASE_ADDR),
-		.length		= AVIC_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
-		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
-		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	},
+#ifdef CONFIG_SOC_IMX31
+static struct map_desc mx31_io_desc[] __initdata = {
+	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
 };
 
-/*!
+/*
  * This function initializes the memory map. It is called during the
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
@@ -77,34 +53,44 @@ static struct map_desc mxc_io_desc[] __initdata = {
 void __init mx31_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
+	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
 
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
-#ifdef CONFIG_ARCH_MX35
-void __init mx35_map_io(void)
+int imx31_register_gpios(void);
+void __init mx31_init_irq(void)
 {
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(IO_ADDRESS(IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
-
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+	imx31_register_gpios();
 }
-#endif
-
-int imx3x_register_gpios(void);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
 
-void __init mx31_init_irq(void)
+void __init mx35_map_io(void)
 {
-	mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
-	imx3x_register_gpios();
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
 }
 
+int imx35_register_gpios(void);
 void __init mx35_init_irq(void)
 {
-	mx31_init_irq();
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+	imx35_register_gpios();
 }
+#endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_CACHE_L2X0
 static int mxc_init_l2x0(void)
@@ -129,7 +115,7 @@ static int mxc_init_l2x0(void)
 		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
 	}
 
-	l2x0_base = ioremap(L2CC_BASE_ADDR, 4096);
+	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
 	if (IS_ERR(l2x0_base)) {
 		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
 				PTR_ERR(l2x0_base));
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 827fd3c8020..8f1a38ebf5c 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -34,7 +34,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
-#include <mach/mmc.h>
 #include <mach/mx3fb.h>
 #include <mach/ipu.h>
 
@@ -158,7 +157,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data)
 	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
 }
 
-static struct imxmmc_platform_data mmc_pdata = {
+static const struct imxmmc_platform_data mmc_pdata __initconst = {
 	.get_ro	= mxc_mmc1_get_ro,
 	.init	= mxc_mmc1_init,
 	.exit	= mxc_mmc1_exit,
@@ -216,7 +215,7 @@ void __init mx31lilly_db_init(void)
 	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_imx_uart1(&uart_pdata);
 	imx31_add_imx_uart2(&uart_pdata);
-	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	imx31_add_mxc_mmc(0, &mmc_pdata);
 	mx31lilly_init_fb();
 }
 
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
index 7b0e74e275b..3124ea837ac 100644
--- a/arch/arm/mach-mx3/mx31lite-db.c
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -35,7 +35,6 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lite.h>
-#include <mach/mmc.h>
 
 #include "devices-imx31.h"
 #include "devices.h"
@@ -142,7 +141,7 @@ static void mxc_mmc1_exit(struct device *dev, void *data)
 	free_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), data);
 }
 
-static struct imxmmc_platform_data mmc_pdata = {
+static const struct imxmmc_platform_data mmc_pdata __initconst = {
 	.get_ro	 = mxc_mmc1_get_ro,
 	.init	   = mxc_mmc1_init,
 	.exit	   = mxc_mmc1_exit,
@@ -197,10 +196,9 @@ void __init mx31lite_db_init(void)
 					ARRAY_SIZE(litekit_db_board_pins),
 					"development board pins");
 	imx31_add_imx_uart0(&uart_pdata);
-	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	imx31_add_mxc_mmc(0, &mmc_pdata);
 	imx31_add_spi_imx0(&spi0_pdata);
 	platform_device_register(&litekit_led_device);
-	mxc_register_device(&imx_wdt_device0, NULL);
+	imx31_add_imx2_wdt(NULL);
 	mxc_register_device(&imx_rtc_device0, NULL);
 }
-
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index fc395a7a859..94a0b9e4b7f 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -18,15 +18,12 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include <linux/fsl_devices.h>
 
 #include <linux/usb/otg.h>
 
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include "devices-imx31.h"
@@ -103,7 +100,7 @@ static void devboard_sdhc2_exit(struct device *dev, void *data)
 	gpio_free(SDHC2_CD);
 }
 
-static struct imxmmc_platform_data sdhc2_pdata = {
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
 	.get_ro	= devboard_sdhc2_get_ro,
 	.init	= devboard_sdhc2_init,
 	.exit	= devboard_sdhc2_exit,
@@ -187,7 +184,7 @@ static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 	.init	= devboard_usbh1_hw_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
@@ -196,6 +193,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = {
 static int __init devboard_usbh1_init(void)
 {
 	struct otg_transceiver *otg;
+	struct platform_device *pdev;
 
 	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
 	if (!otg)
@@ -207,11 +205,15 @@ static int __init devboard_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
 }
 
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
@@ -228,11 +230,11 @@ void __init mx31moboard_devboard_init(void)
 
 	imx31_add_imx_uart1(&uart_pdata);
 
-	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+	imx31_add_mxc_mmc(1, &sdhc2_pdata);
 
 	devboard_init_sel_gpios();
 
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+	imx31_add_fsl_usb2_udc(&usb_pdata);
 
 	devboard_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 18069cb7d06..f449a97ae1a 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -21,7 +21,6 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
-#include <linux/fsl_devices.h>
 
 #include <linux/usb/otg.h>
 
@@ -29,12 +28,11 @@
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include <media/soc_camera.h>
 
+#include "devices-imx31.h"
 #include "devices.h"
 
 static unsigned int marxbot_pins[] = {
@@ -116,7 +114,7 @@ static void marxbot_sdhc2_exit(struct device *dev, void *data)
 	gpio_free(SDHC2_CD);
 }
 
-static struct imxmmc_platform_data sdhc2_pdata = {
+static const struct imxmmc_platform_data sdhc2_pdata __initconst = {
 	.get_ro	= marxbot_sdhc2_get_ro,
 	.init	= marxbot_sdhc2_init,
 	.exit	= marxbot_sdhc2_exit,
@@ -302,7 +300,7 @@ static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
 	return 0;
 }
 
-static struct mxc_usbh_platform_data usbh1_pdata = {
+static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
 	.init	= marxbot_usbh1_hw_init,
 	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
@@ -311,6 +309,7 @@ static struct mxc_usbh_platform_data usbh1_pdata = {
 static int __init marxbot_usbh1_init(void)
 {
 	struct otg_transceiver *otg;
+	struct platform_device *pdev;
 
 	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
 	if (!otg)
@@ -322,10 +321,14 @@ static int __init marxbot_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+	pdev = imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
 }
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
@@ -344,7 +347,7 @@ void __init mx31moboard_marxbot_init(void)
 
 	dspics_resets_init();
 
-	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+	imx31_add_mxc_mmc(1, &sdhc2_pdata);
 
 	spi_register_board_info(marxbot_spi_board_info,
 		ARRAY_SIZE(marxbot_spi_board_info));
@@ -357,7 +360,7 @@ void __init mx31moboard_marxbot_init(void)
 	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
 	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
 
-	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+	imx31_add_fsl_usb2_udc(&usb_pdata);
 
 	marxbot_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-smartbot.c b/arch/arm/mach-mx3/mx31moboard-smartbot.c
index 04760a53005..bbec3c82264 100644
--- a/arch/arm/mach-mx3/mx31moboard-smartbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-smartbot.c
@@ -19,7 +19,6 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
-#include <linux/fsl_devices.h>
 
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
@@ -28,7 +27,6 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31moboard.h>
-#include <mach/mxc_ehci.h>
 #include <mach/ulpi.h>
 
 #include <media/soc_camera.h>
@@ -118,24 +116,30 @@ static int __init smartbot_cam_init(void)
 	return 0;
 }
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
 #if defined(CONFIG_USB_ULPI)
 
-static struct mxc_usbh_platform_data otg_host_pdata = {
+static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
 };
 
 static int __init smartbot_otg_host_init(void)
 {
+	struct platform_device *pdev;
+
 	otg_host_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	return mxc_register_device(&mxc_otg_host, &otg_host_pdata);
+	pdev = imx31_add_mxc_ehci_otg(&otg_host_pdata);
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	return 0;
 }
 #else
 static inline int smartbot_otg_host_init(void) { return 0; }
@@ -182,7 +186,7 @@ void __init mx31moboard_smartbot_init(int board)
 
 	switch (board) {
 	case MX31SMARTBOT:
-		mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+		imx31_add_fsl_usb2_udc(&usb_pdata);
 		break;
 	case MX31EYEBOT:
 		smartbot_otg_host_init();
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 3ec910a7a18..55254b6e946 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -1,20 +1,47 @@
 if ARCH_MX5
+# ARCH_MX51 and ARCH_MX50 are left for compatibility
+
+config ARCH_MX50
+	bool
 
 config ARCH_MX51
 	bool
-	default y
+
+config ARCH_MX53
+	bool
+
+config SOC_IMX50
+	bool
+	select MXC_TZIC
+	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_HAS_CPUFREQ
+	select ARCH_MX50
+
+config	SOC_IMX51
+	bool
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_HAS_CPUFREQ
+	select ARCH_MX51
+
+config	SOC_IMX53
+	bool
+	select MXC_TZIC
+	select ARCH_MXC_IOMUX_V3
+	select ARCH_MX53
 
 comment "MX5 platforms:"
 
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_ESDHC
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for MX51 Babbage platform, also known as MX51EVK in
 	  u-boot. This includes specific configurations for the board and its
@@ -22,7 +49,9 @@ config MACH_MX51_BABBAGE
 
 config MACH_MX51_3DS
 	bool "Support MX51PDK (3DS)"
+	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
 	help
@@ -31,6 +60,7 @@ config MACH_MX51_3DS
 
 config MACH_EUKREA_CPUIMX51
 	bool "Support Eukrea CPUIMX51 module"
+	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
@@ -47,7 +77,7 @@ choice
 config MACH_EUKREA_MBIMX51_BASEBOARD
 	prompt "Eukrea MBIMX51 development board"
 	bool
-	select IMX_HAVE_PLATFORM_ESDHC
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMX51 evaluation board.
@@ -56,6 +86,7 @@ endchoice
 
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
+	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -72,7 +103,7 @@ choice
 config MACH_EUKREA_MBIMXSD51_BASEBOARD
 	prompt "Eukrea MBIMXSD development board"
 	bool
-	select IMX_HAVE_PLATFORM_ESDHC
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	help
 	  This adds board specific devices that can be found on Eukrea's
 	  MBIMXSD evaluation board.
@@ -81,9 +112,33 @@ endchoice
 
 config MACH_MX51_EFIKAMX
 	bool "Support MX51 Genesi Efika MX nettop"
+	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for Genesi Efika MX nettop. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX53_EVK
+	bool "Support MX53 EVK platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX_UART
+	help
+	  Include support for MX53 EVK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+
+config MACH_MX50_RDP
+	bool "Support MX50 reference design platform"
+	depends on BROKEN
+	select SOC_IMX50
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX50 reference design platform (RDP) board. This
+	  includes specific configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 462f177eddf..0c398baf11f 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -3,13 +3,16 @@
 #
 
 # Object file lists.
-obj-y   := cpu.o mm.o clock-mx51.o devices.o
+obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o
+obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
 
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
+obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
 obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
+obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
index 9939a19d99a..e928be1b675 100644
--- a/arch/arm/mach-mx5/Makefile.boot
+++ b/arch/arm/mach-mx5/Makefile.boot
@@ -1,3 +1,9 @@
-   zreladdr-y	:= 0x90008000
-params_phys-y	:= 0x90000100
-initrd_phys-y	:= 0x90800000
+   zreladdr-$(CONFIG_ARCH_MX50)	:= 0x70008000
+params_phys-$(CONFIG_ARCH_MX50)	:= 0x70000100
+initrd_phys-$(CONFIG_ARCH_MX50)	:= 0x70800000
+   zreladdr-$(CONFIG_ARCH_MX51)	:= 0x90008000
+params_phys-$(CONFIG_ARCH_MX51)	:= 0x90000100
+initrd_phys-$(CONFIG_ARCH_MX51)	:= 0x90800000
+   zreladdr-$(CONFIG_ARCH_MX53)	:= 0x70008000
+params_phys-$(CONFIG_ARCH_MX53)	:= 0x70000100
+initrd_phys-$(CONFIG_ARCH_MX53)	:= 0x70800000
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 6a9792fd0a7..f8652ef25f8 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -40,11 +40,11 @@
 #include "devices-imx51.h"
 #include "devices.h"
 
-#define CPUIMX51_USBH1_STP	(0*32 + 27)
-#define CPUIMX51_QUARTA_GPIO	(2*32 + 28)
-#define CPUIMX51_QUARTB_GPIO	(2*32 + 25)
-#define CPUIMX51_QUARTC_GPIO	(2*32 + 26)
-#define CPUIMX51_QUARTD_GPIO	(2*32 + 27)
+#define CPUIMX51_USBH1_STP	IMX_GPIO_NR(1, 27)
+#define CPUIMX51_QUARTA_GPIO	IMX_GPIO_NR(3, 28)
+#define CPUIMX51_QUARTB_GPIO	IMX_GPIO_NR(3, 25)
+#define CPUIMX51_QUARTC_GPIO	IMX_GPIO_NR(3, 26)
+#define CPUIMX51_QUARTD_GPIO	IMX_GPIO_NR(3, 27)
 #define CPUIMX51_QUARTA_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO)
 #define CPUIMX51_QUARTB_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO)
 #define CPUIMX51_QUARTC_IRQ	(MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO)
@@ -113,7 +113,7 @@ static struct platform_device *devices[] __initdata = {
 #endif
 };
 
-static struct pad_desc eukrea_cpuimx51_pads[] = {
+static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
 	/* UART1 */
 	MX51_PAD_UART1_RXD__UART1_RXD,
 	MX51_PAD_UART1_TXD__UART1_TXD,
@@ -121,15 +121,15 @@ static struct pad_desc eukrea_cpuimx51_pads[] = {
 	MX51_PAD_UART1_CTS__UART1_CTS,
 
 	/* I2C2 */
-	MX51_PAD_GPIO_1_2__I2C2_SCL,
-	MX51_PAD_GPIO_1_3__I2C2_SDA,
-	MX51_PAD_NANDF_D10__GPIO_3_30,
+	MX51_PAD_GPIO1_2__I2C2_SCL,
+	MX51_PAD_GPIO1_3__I2C2_SDA,
+	MX51_PAD_NANDF_D10__GPIO3_30,
 
 	/* QUART IRQ */
-	MX51_PAD_NANDF_D15__GPIO_3_25,
-	MX51_PAD_NANDF_D14__GPIO_3_26,
-	MX51_PAD_NANDF_D13__GPIO_3_27,
-	MX51_PAD_NANDF_D12__GPIO_3_28,
+	MX51_PAD_NANDF_D15__GPIO3_25,
+	MX51_PAD_NANDF_D14__GPIO3_26,
+	MX51_PAD_NANDF_D13__GPIO3_27,
+	MX51_PAD_NANDF_D12__GPIO3_28,
 
 	/* USB HOST1 */
 	MX51_PAD_USBH1_CLK__USBH1_CLK,
@@ -178,6 +178,8 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usbother_base;
 
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base)
+		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
 
 	/* Set the PHY clock to 19.2MHz */
@@ -196,6 +198,8 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usbother_base;
 
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base)
+		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
 
 	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
@@ -292,7 +296,7 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
 	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.boot_params = PHYS_OFFSET + 0x100,
+	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
 	.init_irq = mx51_init_irq,
 	.init_machine = eukrea_cpuimx51_init,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index 4b3a6119c5f..ad931895d8b 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -43,19 +43,19 @@
 #include "devices-imx51.h"
 #include "devices.h"
 
-#define USBH1_RST		(1*32 + 28)
-#define ETH_RST			(1*32 + 31)
-#define TSC2007_IRQGPIO		(2*32 + 12)
-#define CAN_IRQGPIO		(0*32 + 1)
-#define CAN_RST			(3*32 + 15)
-#define CAN_NCS			(3*32 + 24)
-#define CAN_RXOBF		(0*32 + 4)
-#define CAN_RX1BF		(0*32 + 6)
-#define CAN_TXORTS		(0*32 + 7)
-#define CAN_TX1RTS		(0*32 + 8)
-#define CAN_TX2RTS		(0*32 + 9)
-#define I2C_SCL			(3*32 + 16)
-#define I2C_SDA			(3*32 + 17)
+#define USBH1_RST		IMX_GPIO_NR(2, 28)
+#define ETH_RST			IMX_GPIO_NR(2, 31)
+#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 12)
+#define CAN_IRQGPIO		IMX_GPIO_NR(1, 1)
+#define CAN_RST			IMX_GPIO_NR(4, 15)
+#define CAN_NCS			IMX_GPIO_NR(4, 24)
+#define CAN_RXOBF		IMX_GPIO_NR(1, 4)
+#define CAN_RX1BF		IMX_GPIO_NR(1, 6)
+#define CAN_TXORTS		IMX_GPIO_NR(1, 7)
+#define CAN_TX1RTS		IMX_GPIO_NR(1, 8)
+#define CAN_TX2RTS		IMX_GPIO_NR(1, 9)
+#define I2C_SCL			IMX_GPIO_NR(4, 16)
+#define I2C_SDA			IMX_GPIO_NR(4, 17)
 
 /* USB_CTRL_1 */
 #define MX51_USB_CTRL_1_OFFSET		0x10
@@ -65,10 +65,7 @@
 #define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
 #define	MX51_USB_PLL_DIV_24_MHZ		0x02
 
-#define CPUIMX51SD_GPIO_3_12 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, \
-				MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
-
-static struct pad_desc eukrea_cpuimx51sd_pads[] = {
+static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 	/* UART1 */
 	MX51_PAD_UART1_RXD__UART1_RXD,
 	MX51_PAD_UART1_TXD__UART1_TXD,
@@ -88,30 +85,33 @@ static struct pad_desc eukrea_cpuimx51sd_pads[] = {
 	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
 	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
 	MX51_PAD_USBH1_STP__USBH1_STP,
-	MX51_PAD_EIM_CS3__GPIO_2_28,		/* PHY nRESET */
+	MX51_PAD_EIM_CS3__GPIO2_28,		/* PHY nRESET */
 
 	/* FEC */
-	MX51_PAD_EIM_DTACK__GPIO_2_31,		/* PHY nRESET */
+	MX51_PAD_EIM_DTACK__GPIO2_31,		/* PHY nRESET */
 
 	/* HSI2C */
-	MX51_PAD_I2C1_CLK__GPIO_4_16,
-	MX51_PAD_I2C1_DAT__GPIO_4_17,
+	MX51_PAD_I2C1_CLK__GPIO4_16,
+	MX51_PAD_I2C1_DAT__GPIO4_17,
 
 	/* CAN */
 	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
 	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
 	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO_4_24,		/* nCS */
-	MX51_PAD_CSI2_PIXCLK__GPIO_4_15,	/* nReset */
-	MX51_PAD_GPIO_1_1__GPIO_1_1,		/* IRQ */
-	MX51_PAD_GPIO_1_4__GPIO_1_4,		/* Control signals */
-	MX51_PAD_GPIO_1_6__GPIO_1_6,
-	MX51_PAD_GPIO_1_7__GPIO_1_7,
-	MX51_PAD_GPIO_1_8__GPIO_1_8,
-	MX51_PAD_GPIO_1_9__GPIO_1_9,
+	MX51_PAD_CSPI1_SS0__GPIO4_24,		/* nCS */
+	MX51_PAD_CSI2_PIXCLK__GPIO4_15,		/* nReset */
+	MX51_PAD_GPIO1_1__GPIO1_1,		/* IRQ */
+	MX51_PAD_GPIO1_4__GPIO1_4,		/* Control signals */
+	MX51_PAD_GPIO1_6__GPIO1_6,
+	MX51_PAD_GPIO1_7__GPIO1_7,
+	MX51_PAD_GPIO1_8__GPIO1_8,
+	MX51_PAD_GPIO1_9__GPIO1_9,
 
 	/* Touchscreen */
-	CPUIMX51SD_GPIO_3_12,			/* IRQ */
+	/* IRQ */
+	_MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -157,6 +157,8 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usbother_base;
 
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base)
+		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
 
 	/* Set the PHY clock to 19.2MHz */
@@ -175,6 +177,8 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usbother_base;
 
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base)
+		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
 
 	/* The clock for the USBH1 ULPI port will come from the PHY. */
@@ -243,7 +247,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = {
 		.mode		= SPI_MODE_0,
 		.chip_select     = 0,
 		.platform_data   = &mcp251x_info,
-		.irq             = gpio_to_irq(0 * 32 + 1)
+		.irq             = gpio_to_irq(CAN_IRQGPIO)
 	},
 };
 
@@ -323,7 +327,7 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
 	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.boot_params = PHYS_OFFSET + 0x100,
+	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
 	.init_irq = mx51_init_irq,
 	.init_machine = eukrea_cpuimx51sd_init,
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
new file mode 100644
index 00000000000..fd32e4c450e
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx50_rdp.c
@@ -0,0 +1,197 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/fsl_devices.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx50.h>
+
+#include <asm/irq.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include "devices-mx50.h"
+
+static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
+	/* SD1 */
+	MX50_PAD_ECSPI2_SS0__GPIO_4_19,
+	MX50_PAD_EIM_CRE__GPIO_1_27,
+	MX50_PAD_SD1_CMD__SD1_CMD,
+
+	MX50_PAD_SD1_CLK__SD1_CLK,
+	MX50_PAD_SD1_D0__SD1_D0,
+	MX50_PAD_SD1_D1__SD1_D1,
+	MX50_PAD_SD1_D2__SD1_D2,
+	MX50_PAD_SD1_D3__SD1_D3,
+
+	/* SD2 */
+	MX50_PAD_SD2_CD__GPIO_5_17,
+	MX50_PAD_SD2_WP__GPIO_5_16,
+	MX50_PAD_SD2_CMD__SD2_CMD,
+	MX50_PAD_SD2_CLK__SD2_CLK,
+	MX50_PAD_SD2_D0__SD2_D0,
+	MX50_PAD_SD2_D1__SD2_D1,
+	MX50_PAD_SD2_D2__SD2_D2,
+	MX50_PAD_SD2_D3__SD2_D3,
+	MX50_PAD_SD2_D4__SD2_D4,
+	MX50_PAD_SD2_D5__SD2_D5,
+	MX50_PAD_SD2_D6__SD2_D6,
+	MX50_PAD_SD2_D7__SD2_D7,
+
+	/* SD3 */
+	MX50_PAD_SD3_CMD__SD3_CMD,
+	MX50_PAD_SD3_CLK__SD3_CLK,
+	MX50_PAD_SD3_D0__SD3_D0,
+	MX50_PAD_SD3_D1__SD3_D1,
+	MX50_PAD_SD3_D2__SD3_D2,
+	MX50_PAD_SD3_D3__SD3_D3,
+	MX50_PAD_SD3_D4__SD3_D4,
+	MX50_PAD_SD3_D5__SD3_D5,
+	MX50_PAD_SD3_D6__SD3_D6,
+	MX50_PAD_SD3_D7__SD3_D7,
+
+	/* PWR_INT */
+	MX50_PAD_ECSPI2_MISO__GPIO_4_18,
+
+	/* UART pad setting */
+	MX50_PAD_UART1_TXD__UART1_TXD,
+	MX50_PAD_UART1_RXD__UART1_RXD,
+	MX50_PAD_UART1_RTS__UART1_RTS,
+	MX50_PAD_UART2_TXD__UART2_TXD,
+	MX50_PAD_UART2_RXD__UART2_RXD,
+	MX50_PAD_UART2_CTS__UART2_CTS,
+	MX50_PAD_UART2_RTS__UART2_RTS,
+
+	MX50_PAD_I2C1_SCL__I2C1_SCL,
+	MX50_PAD_I2C1_SDA__I2C1_SDA,
+	MX50_PAD_I2C2_SCL__I2C2_SCL,
+	MX50_PAD_I2C2_SDA__I2C2_SDA,
+
+	MX50_PAD_EPITO__USBH1_PWR,
+	/* Need to comment below line if
+	 * one needs to debug owire.
+	 */
+	MX50_PAD_OWIRE__USBH1_OC,
+	/* using gpio to control otg pwr */
+	MX50_PAD_PWM2__GPIO_6_25,
+	MX50_PAD_I2C3_SCL__USBOTG_OC,
+
+	MX50_PAD_SSI_RXC__FEC_MDIO,
+	MX50_PAD_SSI_RXC__FEC_MDIO,
+	MX50_PAD_DISP_D0__FEC_TXCLK,
+	MX50_PAD_DISP_D1__FEC_RX_ER,
+	MX50_PAD_DISP_D2__FEC_RX_DV,
+	MX50_PAD_DISP_D3__FEC_RXD1,
+	MX50_PAD_DISP_D4__FEC_RXD0,
+	MX50_PAD_DISP_D5__FEC_TX_EN,
+	MX50_PAD_DISP_D6__FEC_TXD1,
+	MX50_PAD_DISP_D7__FEC_TXD0,
+	MX50_PAD_SSI_RXFS__FEC_MDC,
+	MX50_PAD_I2C3_SDA__GPIO_6_23,
+	MX50_PAD_ECSPI1_SCLK__GPIO_4_12,
+
+	MX50_PAD_CSPI_SS0__CSPI_SS0,
+	MX50_PAD_ECSPI1_MOSI__CSPI_SS1,
+	MX50_PAD_CSPI_MOSI__CSPI_MOSI,
+	MX50_PAD_CSPI_MISO__CSPI_MISO,
+
+	/* SGTL500_OSC_EN */
+	MX50_PAD_UART1_CTS__GPIO_6_8,
+
+	/* SGTL_AMP_SHDN */
+	MX50_PAD_UART3_RXD__GPIO_6_15,
+
+	/* Keypad */
+	MX50_PAD_KEY_COL0__KEY_COL0,
+	MX50_PAD_KEY_ROW0__KEY_ROW0,
+	MX50_PAD_KEY_COL1__KEY_COL1,
+	MX50_PAD_KEY_ROW1__KEY_ROW1,
+	MX50_PAD_KEY_COL2__KEY_COL2,
+	MX50_PAD_KEY_ROW2__KEY_ROW2,
+	MX50_PAD_KEY_COL3__KEY_COL3,
+	MX50_PAD_KEY_ROW3__KEY_ROW3,
+	MX50_PAD_EIM_DA0__KEY_COL4,
+	MX50_PAD_EIM_DA1__KEY_ROW4,
+	MX50_PAD_EIM_DA2__KEY_COL5,
+	MX50_PAD_EIM_DA3__KEY_ROW5,
+	MX50_PAD_EIM_DA4__KEY_COL6,
+	MX50_PAD_EIM_DA5__KEY_ROW6,
+	MX50_PAD_EIM_DA6__KEY_COL7,
+	MX50_PAD_EIM_DA7__KEY_ROW7,
+	/*EIM pads */
+	MX50_PAD_EIM_DA8__GPIO_1_8,
+	MX50_PAD_EIM_DA9__GPIO_1_9,
+	MX50_PAD_EIM_DA10__GPIO_1_10,
+	MX50_PAD_EIM_DA11__GPIO_1_11,
+	MX50_PAD_EIM_DA12__GPIO_1_12,
+	MX50_PAD_EIM_DA13__GPIO_1_13,
+	MX50_PAD_EIM_DA14__GPIO_1_14,
+	MX50_PAD_EIM_DA15__GPIO_1_15,
+	MX50_PAD_EIM_CS2__GPIO_1_16,
+	MX50_PAD_EIM_CS1__GPIO_1_17,
+	MX50_PAD_EIM_CS0__GPIO_1_18,
+	MX50_PAD_EIM_EB0__GPIO_1_19,
+	MX50_PAD_EIM_EB1__GPIO_1_20,
+	MX50_PAD_EIM_WAIT__GPIO_1_21,
+	MX50_PAD_EIM_BCLK__GPIO_1_22,
+	MX50_PAD_EIM_RDY__GPIO_1_23,
+	MX50_PAD_EIM_OE__GPIO_1_24,
+};
+
+/* Serial ports */
+static const struct imxuart_platform_data uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mx50_rdp_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
+					ARRAY_SIZE(mx50_rdp_pads));
+
+	imx50_add_imx_uart(0, &uart_pdata);
+	imx50_add_imx_uart(1, &uart_pdata);
+}
+
+static void __init mx50_rdp_timer_init(void)
+{
+	mx50_clocks_init(32768, 24000000, 22579200);
+}
+
+static struct sys_timer mx50_rdp_timer = {
+	.init	= mx50_rdp_timer_init,
+};
+
+MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
+	.map_io = mx50_map_io,
+	.init_irq = mx50_init_irq,
+	.init_machine = mx50_rdp_board_init,
+	.timer = &mx50_rdp_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 79ce8dcf3cd..e42bd2eb034 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -30,7 +30,7 @@
 #define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
 #define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)
 
-static struct pad_desc mx51_3ds_pads[] = {
+static iomux_v3_cfg_t mx51_3ds_pads[] = {
 	/* UART1 */
 	MX51_PAD_UART1_RXD__UART1_RXD,
 	MX51_PAD_UART1_TXD__UART1_TXD,
@@ -50,7 +50,7 @@ static struct pad_desc mx51_3ds_pads[] = {
 	MX51_PAD_EIM_D27__UART3_RTS,
 
 	/* CPLD PARENT IRQ PIN */
-	MX51_PAD_GPIO_1_6__GPIO_1_6,
+	MX51_PAD_GPIO1_6__GPIO1_6,
 
 	/* KPP */
 	MX51_PAD_KEY_ROW0__KEY_ROW0,
@@ -68,7 +68,7 @@ static struct pad_desc mx51_3ds_pads[] = {
 	MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
 	MX51_PAD_NANDF_RB3__ECSPI2_MISO,
 	MX51_PAD_NANDF_D15__ECSPI2_MOSI,
-	MX51_PAD_NANDF_D12__GPIO_3_28,
+	MX51_PAD_NANDF_D12__GPIO3_28,
 };
 
 /* Serial ports */
@@ -172,6 +172,7 @@ static void __init mxc_board_init(void)
 		printk(KERN_WARNING "Init of the debugboard failed, all "
 				    "devices on the board are unusable.\n");
 
+	imx51_add_sdhci_esdhc_imx(0, NULL);
 	mxc_init_keypad();
 }
 
@@ -186,7 +187,7 @@ static struct sys_timer mxc_timer = {
 
 MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.boot_params = PHYS_OFFSET + 0x100,
+	.boot_params = MX51_PHYS_OFFSET + 0x100,
 	.map_io = mx51_map_io,
 	.init_irq = mx51_init_irq,
 	.init_machine = mxc_board_init,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index acbe30df2e6..1d231e84107 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -20,6 +20,8 @@
 #include <linux/fec.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -36,11 +38,13 @@
 #include "devices.h"
 #include "cpu_op-mx51.h"
 
-#define BABBAGE_USB_HUB_RESET	(0*32 + 7)	/* GPIO_1_7 */
-#define BABBAGE_USBH1_STP	(0*32 + 27)	/* GPIO_1_27 */
-#define BABBAGE_PHY_RESET	(1*32 + 5)	/* GPIO_2_5 */
-#define BABBAGE_FEC_PHY_RESET	(1*32 + 14)	/* GPIO_2_14 */
-#define BABBAGE_POWER_KEY	(1*32 + 21)	/* GPIO_2_21 */
+#define BABBAGE_USB_HUB_RESET	IMX_GPIO_NR(1, 7)
+#define BABBAGE_USBH1_STP	IMX_GPIO_NR(1, 27)
+#define BABBAGE_PHY_RESET	IMX_GPIO_NR(2, 5)
+#define BABBAGE_FEC_PHY_RESET	IMX_GPIO_NR(2, 14)
+#define BABBAGE_POWER_KEY	IMX_GPIO_NR(2, 21)
+#define BABBAGE_ECSPI1_CS0	IMX_GPIO_NR(4, 24)
+#define BABBAGE_ECSPI1_CS1	IMX_GPIO_NR(4, 25)
 
 /* USB_CTRL_1 */
 #define MX51_USB_CTRL_1_OFFSET			0x10
@@ -65,7 +69,7 @@ static const struct gpio_keys_platform_data imx_button_data __initconst = {
 	.nbuttons	= ARRAY_SIZE(babbage_buttons),
 };
 
-static struct pad_desc mx51babbage_pads[] = {
+static iomux_v3_cfg_t mx51babbage_pads[] = {
 	/* UART1 */
 	MX51_PAD_UART1_RXD__UART1_RXD,
 	MX51_PAD_UART1_TXD__UART1_TXD,
@@ -91,8 +95,8 @@ static struct pad_desc mx51babbage_pads[] = {
 	MX51_PAD_KEY_COL5__I2C2_SDA,
 
 	/* HSI2C */
-	MX51_PAD_I2C1_CLK__HSI2C_CLK,
-	MX51_PAD_I2C1_DAT__HSI2C_DAT,
+	MX51_PAD_I2C1_CLK__I2C1_CLK,
+	MX51_PAD_I2C1_DAT__I2C1_DAT,
 
 	/* USB HOST1 */
 	MX51_PAD_USBH1_CLK__USBH1_CLK,
@@ -108,29 +112,29 @@ static struct pad_desc mx51babbage_pads[] = {
 	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
 
 	/* USB HUB reset line*/
-	MX51_PAD_GPIO_1_7__GPIO_1_7,
+	MX51_PAD_GPIO1_7__GPIO1_7,
 
 	/* FEC */
 	MX51_PAD_EIM_EB2__FEC_MDIO,
-	MX51_PAD_EIM_EB3__FEC_RDAT1,
-	MX51_PAD_EIM_CS2__FEC_RDAT2,
-	MX51_PAD_EIM_CS3__FEC_RDAT3,
+	MX51_PAD_EIM_EB3__FEC_RDATA1,
+	MX51_PAD_EIM_CS2__FEC_RDATA2,
+	MX51_PAD_EIM_CS3__FEC_RDATA3,
 	MX51_PAD_EIM_CS4__FEC_RX_ER,
 	MX51_PAD_EIM_CS5__FEC_CRS,
 	MX51_PAD_NANDF_RB2__FEC_COL,
-	MX51_PAD_NANDF_RB3__FEC_RXCLK,
-	MX51_PAD_NANDF_RB6__FEC_RDAT0,
-	MX51_PAD_NANDF_RB7__FEC_TDAT0,
+	MX51_PAD_NANDF_RB3__FEC_RX_CLK,
+	MX51_PAD_NANDF_D9__FEC_RDATA0,
+	MX51_PAD_NANDF_D8__FEC_TDATA0,
 	MX51_PAD_NANDF_CS2__FEC_TX_ER,
 	MX51_PAD_NANDF_CS3__FEC_MDC,
-	MX51_PAD_NANDF_CS4__FEC_TDAT1,
-	MX51_PAD_NANDF_CS5__FEC_TDAT2,
-	MX51_PAD_NANDF_CS6__FEC_TDAT3,
+	MX51_PAD_NANDF_CS4__FEC_TDATA1,
+	MX51_PAD_NANDF_CS5__FEC_TDATA2,
+	MX51_PAD_NANDF_CS6__FEC_TDATA3,
 	MX51_PAD_NANDF_CS7__FEC_TX_EN,
 	MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
 
 	/* FEC PHY reset line */
-	MX51_PAD_EIM_A20__GPIO_2_14,
+	MX51_PAD_EIM_A20__GPIO2_14,
 
 	/* SD 1 */
 	MX51_PAD_SD1_CMD__SD1_CMD,
@@ -147,6 +151,13 @@ static struct pad_desc mx51babbage_pads[] = {
 	MX51_PAD_SD2_DATA1__SD2_DATA1,
 	MX51_PAD_SD2_DATA2__SD2_DATA2,
 	MX51_PAD_SD2_DATA3__SD2_DATA3,
+
+	/* eCSPI1 */
+	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+	MX51_PAD_CSPI1_SS0__GPIO4_24,
+	MX51_PAD_CSPI1_SS1__GPIO4_25,
 };
 
 /* Serial ports */
@@ -177,12 +188,12 @@ static struct imxi2c_platform_data babbage_hsi2c_data = {
 
 static int gpio_usbh1_active(void)
 {
-	struct pad_desc usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO_1_27;
-	struct pad_desc phyreset_gpio = MX51_PAD_EIM_D21__GPIO_2_5;
+	iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
+	iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5;
 	int ret;
 
 	/* Set USBH1_STP to GPIO and toggle it */
-	mxc_iomux_v3_setup_pad(&usbh1stp_gpio);
+	mxc_iomux_v3_setup_pad(usbh1stp_gpio);
 	ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp");
 
 	if (ret) {
@@ -195,7 +206,7 @@ static int gpio_usbh1_active(void)
 	gpio_free(BABBAGE_USBH1_STP);
 
 	/* De-assert USB PHY RESETB */
-	mxc_iomux_v3_setup_pad(&phyreset_gpio);
+	mxc_iomux_v3_setup_pad(phyreset_gpio);
 	ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset");
 
 	if (ret) {
@@ -251,6 +262,8 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usbother_base;
 
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base)
+		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
 
 	/* Set the PHY clock to 19.2MHz */
@@ -269,6 +282,8 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usbother_base;
 
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base)
+		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
 
 	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
@@ -310,13 +325,35 @@ static int __init babbage_otg_mode(char *options)
 }
 __setup("otg_mode=", babbage_otg_mode);
 
+static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = {
+	{
+		.modalias = "mtd_dataflash",
+		.max_speed_hz = 25000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.mode = SPI_MODE_0,
+		.platform_data = NULL,
+	},
+};
+
+static int mx51_babbage_spi_cs[] = {
+	BABBAGE_ECSPI1_CS0,
+	BABBAGE_ECSPI1_CS1,
+};
+
+static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
+	.chipselect     = mx51_babbage_spi_cs,
+	.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
+};
+
 /*
  * Board specific initialization.
  */
 static void __init mxc_board_init(void)
 {
-	struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	struct pad_desc power_key = MX51_PAD_EIM_A27__GPIO_2_21;
+	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
+		MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
 
 #if defined(CONFIG_CPU_FREQ_IMX)
 	get_cpu_op = mx51_get_cpu_op;
@@ -328,8 +365,7 @@ static void __init mxc_board_init(void)
 	imx51_add_fec(NULL);
 
 	/* Set the PAD settings for the pwr key. */
-	power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2;
-	mxc_iomux_v3_setup_pad(&power_key);
+	mxc_iomux_v3_setup_pad(power_key);
 	imx51_add_gpio_keys(&imx_button_data);
 
 	imx51_add_imx_i2c(0, &babbage_i2c_data);
@@ -346,11 +382,16 @@ static void __init mxc_board_init(void)
 	gpio_usbh1_active();
 	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
 	/* setback USBH1_STP to be function */
-	mxc_iomux_v3_setup_pad(&usbh1stp);
+	mxc_iomux_v3_setup_pad(usbh1stp);
 	babbage_usbhub_reset();
 
-	imx51_add_esdhc(0, NULL);
-	imx51_add_esdhc(1, NULL);
+	imx51_add_sdhci_esdhc_imx(0, NULL);
+	imx51_add_sdhci_esdhc_imx(1, NULL);
+
+	spi_register_board_info(mx51_babbage_spi_board_info,
+		ARRAY_SIZE(mx51_babbage_spi_board_info));
+	imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
+	imx51_add_imx2_wdt(0, NULL);
 }
 
 static void __init mx51_babbage_timer_init(void)
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 6e623bda3ee..b7946f8e8d4 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -18,9 +18,13 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/fsl_devices.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -39,12 +43,81 @@
 
 #define	MX51_USB_PLL_DIV_24_MHZ	0x01
 
-static struct pad_desc mx51efikamx_pads[] = {
+#define EFIKAMX_PCBID0		IMX_GPIO_NR(3, 16)
+#define EFIKAMX_PCBID1		IMX_GPIO_NR(3, 17)
+#define EFIKAMX_PCBID2		IMX_GPIO_NR(3, 11)
+
+#define EFIKAMX_BLUE_LED	IMX_GPIO_NR(3, 13)
+#define EFIKAMX_GREEN_LED	IMX_GPIO_NR(3, 14)
+#define EFIKAMX_RED_LED		IMX_GPIO_NR(3, 15)
+
+#define EFIKAMX_POWER_KEY	IMX_GPIO_NR(2, 31)
+
+#define EFIKAMX_SPI_CS0		IMX_GPIO_NR(4, 24)
+#define EFIKAMX_SPI_CS1		IMX_GPIO_NR(4, 25)
+
+/* board 1.1 doesn't have same reset gpio */
+#define EFIKAMX_RESET1_1	IMX_GPIO_NR(3, 2)
+#define EFIKAMX_RESET		IMX_GPIO_NR(1, 4)
+
+/* the pci ids pin have pull up. they're driven low according to board id */
+#define MX51_PAD_PCBID0	IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PCBID1	IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PCBID2	IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_PWRKEY	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
+
+static iomux_v3_cfg_t mx51efikamx_pads[] = {
 	/* UART1 */
 	MX51_PAD_UART1_RXD__UART1_RXD,
 	MX51_PAD_UART1_TXD__UART1_TXD,
 	MX51_PAD_UART1_RTS__UART1_RTS,
 	MX51_PAD_UART1_CTS__UART1_CTS,
+	/* board id */
+	MX51_PAD_PCBID0,
+	MX51_PAD_PCBID1,
+	MX51_PAD_PCBID2,
+
+	/* SD 1 */
+	MX51_PAD_SD1_CMD__SD1_CMD,
+	MX51_PAD_SD1_CLK__SD1_CLK,
+	MX51_PAD_SD1_DATA0__SD1_DATA0,
+	MX51_PAD_SD1_DATA1__SD1_DATA1,
+	MX51_PAD_SD1_DATA2__SD1_DATA2,
+	MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+	/* SD 2 */
+	MX51_PAD_SD2_CMD__SD2_CMD,
+	MX51_PAD_SD2_CLK__SD2_CLK,
+	MX51_PAD_SD2_DATA0__SD2_DATA0,
+	MX51_PAD_SD2_DATA1__SD2_DATA1,
+	MX51_PAD_SD2_DATA2__SD2_DATA2,
+	MX51_PAD_SD2_DATA3__SD2_DATA3,
+
+	/* SD/MMC WP/CD */
+	MX51_PAD_GPIO1_0__SD1_CD,
+	MX51_PAD_GPIO1_1__SD1_WP,
+	MX51_PAD_GPIO1_7__SD2_WP,
+	MX51_PAD_GPIO1_8__SD2_CD,
+
+	/* leds */
+	MX51_PAD_CSI1_D9__GPIO3_13,
+	MX51_PAD_CSI1_VSYNC__GPIO3_14,
+	MX51_PAD_CSI1_HSYNC__GPIO3_15,
+
+	/* power key */
+	MX51_PAD_PWRKEY,
+
+	/* spi */
+	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
+	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
+	MX51_PAD_CSPI1_SS0__GPIO4_24,
+	MX51_PAD_CSPI1_SS1__GPIO4_25,
+	MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
+	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
+
+	/* reset */
+	MX51_PAD_DI1_PIN13__GPIO3_2,
+	MX51_PAD_GPIO1_4__GPIO1_4,
 };
 
 /* Serial ports */
@@ -75,6 +148,8 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	if (!usb_base)
+		return -ENOMEM;
 	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
 
 	/* Set the PHY clock to 19.2MHz */
@@ -92,12 +167,182 @@ static struct mxc_usbh_platform_data dr_utmi_config = {
 	.flags  = MXC_EHCI_INTERNAL_PHY,
 };
 
+/*   PCBID2  PCBID1 PCBID0  STATE
+	1       1      1    ER1:rev1.1
+	1       1      0    ER2:rev1.2
+	1       0      1    ER3:rev1.3
+	1       0      0    ER4:rev1.4
+*/
+static void __init mx51_efikamx_board_id(void)
+{
+	int id;
+
+	/* things are taking time to settle */
+	msleep(150);
+
+	gpio_request(EFIKAMX_PCBID0, "pcbid0");
+	gpio_direction_input(EFIKAMX_PCBID0);
+	gpio_request(EFIKAMX_PCBID1, "pcbid1");
+	gpio_direction_input(EFIKAMX_PCBID1);
+	gpio_request(EFIKAMX_PCBID2, "pcbid2");
+	gpio_direction_input(EFIKAMX_PCBID2);
+
+	id = gpio_get_value(EFIKAMX_PCBID0);
+	id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
+	id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
+
+	switch (id) {
+	case 7:
+		system_rev = 0x11;
+		break;
+	case 6:
+		system_rev = 0x12;
+		break;
+	case 5:
+		system_rev = 0x13;
+		break;
+	case 4:
+		system_rev = 0x14;
+		break;
+	default:
+		system_rev = 0x10;
+		break;
+	}
+
+	if ((system_rev == 0x10)
+		|| (system_rev == 0x12)
+		|| (system_rev == 0x14)) {
+		printk(KERN_WARNING
+			"EfikaMX: Unsupported board revision 1.%u!\n",
+			system_rev & 0xf);
+	}
+}
+
+static struct gpio_led mx51_efikamx_leds[] = {
+	{
+		.name = "efikamx:green",
+		.default_trigger = "default-on",
+		.gpio = EFIKAMX_GREEN_LED,
+	},
+	{
+		.name = "efikamx:red",
+		.default_trigger = "ide-disk",
+		.gpio = EFIKAMX_RED_LED,
+	},
+	{
+		.name = "efikamx:blue",
+		.default_trigger = "mmc0",
+		.gpio = EFIKAMX_BLUE_LED,
+	},
+};
+
+static struct gpio_led_platform_data mx51_efikamx_leds_data = {
+	.leds = mx51_efikamx_leds,
+	.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
+};
+
+static struct platform_device mx51_efikamx_leds_device = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &mx51_efikamx_leds_data,
+	},
+};
+
+static struct gpio_keys_button mx51_efikamx_powerkey[] = {
+	{
+		.code = KEY_POWER,
+		.gpio = EFIKAMX_POWER_KEY,
+		.type = EV_PWR,
+		.desc = "Power Button (CM)",
+		.wakeup = 1,
+		.debounce_interval = 10, /* ms */
+	},
+};
+
+static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
+	.buttons = mx51_efikamx_powerkey,
+	.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
+};
+
+static struct mtd_partition mx51_efikamx_spi_nor_partitions[] = {
+	{
+	 .name = "u-boot",
+	 .offset = 0,
+	 .size = SZ_256K,
+	},
+	{
+	  .name = "config",
+	  .offset = MTDPART_OFS_APPEND,
+	  .size = SZ_64K,
+	},
+};
+
+static struct flash_platform_data mx51_efikamx_spi_flash_data = {
+	.name		= "spi_flash",
+	.parts		= mx51_efikamx_spi_nor_partitions,
+	.nr_parts	= ARRAY_SIZE(mx51_efikamx_spi_nor_partitions),
+	.type		= "sst25vf032b",
+};
+
+static struct spi_board_info mx51_efikamx_spi_board_info[] __initdata = {
+	{
+		.modalias = "m25p80",
+		.max_speed_hz = 25000000,
+		.bus_num = 0,
+		.chip_select = 1,
+		.platform_data = &mx51_efikamx_spi_flash_data,
+		.irq = -1,
+	},
+};
+
+static int mx51_efikamx_spi_cs[] = {
+	EFIKAMX_SPI_CS0,
+	EFIKAMX_SPI_CS1,
+};
+
+static const struct spi_imx_master mx51_efikamx_spi_pdata __initconst = {
+	.chipselect     = mx51_efikamx_spi_cs,
+	.num_chipselect = ARRAY_SIZE(mx51_efikamx_spi_cs),
+};
+
+void mx51_efikamx_reset(void)
+{
+	if (system_rev == 0x11)
+		gpio_direction_output(EFIKAMX_RESET1_1, 0);
+	else
+		gpio_direction_output(EFIKAMX_RESET, 0);
+}
+
 static void __init mxc_board_init(void)
 {
 	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
 					ARRAY_SIZE(mx51efikamx_pads));
+	mx51_efikamx_board_id();
 	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
 	mxc_init_imx_uart();
+	imx51_add_sdhci_esdhc_imx(0, NULL);
+
+	/* on < 1.2 boards both SD controllers are used */
+	if (system_rev < 0x12) {
+		imx51_add_sdhci_esdhc_imx(1, NULL);
+		mx51_efikamx_leds[2].default_trigger = "mmc1";
+	}
+
+	platform_device_register(&mx51_efikamx_leds_device);
+	imx51_add_gpio_keys(&mx51_efikamx_powerkey_data);
+
+	spi_register_board_info(mx51_efikamx_spi_board_info,
+		ARRAY_SIZE(mx51_efikamx_spi_board_info));
+	imx51_add_ecspi(0, &mx51_efikamx_spi_pdata);
+
+	if (system_rev == 0x11) {
+		gpio_request(EFIKAMX_RESET1_1, "reset");
+		gpio_direction_output(EFIKAMX_RESET1_1, 1);
+	} else {
+		gpio_request(EFIKAMX_RESET, "reset");
+		gpio_direction_output(EFIKAMX_RESET, 1);
+	}
 }
 
 static void __init mx51_efikamx_timer_init(void)
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
new file mode 100644
index 00000000000..fa97d0d5dd0
--- /dev/null
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx53.h>
+
+#include "crm_regs.h"
+#include "devices-imx53.h"
+
+static iomux_v3_cfg_t mx53_evk_pads[] = {
+	MX53_PAD_CSI0_D10__UART1_TXD,
+	MX53_PAD_CSI0_D11__UART1_RXD,
+	MX53_PAD_ATA_DIOW__UART1_TXD,
+	MX53_PAD_ATA_DMACK__UART1_RXD,
+
+	MX53_PAD_ATA_BUFFER_EN__UART2_RXD,
+	MX53_PAD_ATA_DMARQ__UART2_TXD,
+	MX53_PAD_ATA_DIOR__UART2_RTS,
+	MX53_PAD_ATA_INTRQ__UART2_CTS,
+
+	MX53_PAD_ATA_CS_0__UART3_TXD,
+	MX53_PAD_ATA_CS_1__UART3_RXD,
+	MX53_PAD_ATA_DA_1__UART3_CTS,
+	MX53_PAD_ATA_DA_2__UART3_RTS,
+};
+
+static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mx53_evk_init_uart(void)
+{
+	imx53_add_imx_uart(0, &mx53_evk_uart_pdata);
+	imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
+	imx53_add_imx_uart(2, &mx53_evk_uart_pdata);
+}
+
+static void __init mx53_evk_board_init(void)
+{
+	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
+					ARRAY_SIZE(mx53_evk_pads));
+	mx53_evk_init_uart();
+}
+
+static void __init mx53_evk_timer_init(void)
+{
+	mx53_clocks_init(32768, 24000000, 22579200, 0);
+}
+
+static struct sys_timer mx53_evk_timer = {
+	.init	= mx53_evk_timer_init,
+};
+
+MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
+	.map_io = mx53_map_io,
+	.init_irq = mx53_init_irq,
+	.init_machine = mx53_evk_board_init,
+	.timer = &mx53_evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 8ac36d88292..785e1a33618 100644
--- a/arch/arm/mach-mx5/clock-mx51.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -14,8 +14,8 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
 #include <asm/div64.h>
 
 #include <mach/hardware.h>
@@ -33,11 +33,15 @@ static struct clk pll1_main_clk;
 static struct clk pll1_sw_clk;
 static struct clk pll2_sw_clk;
 static struct clk pll3_sw_clk;
+static struct clk mx53_pll4_sw_clk;
 static struct clk lp_apm_clk;
 static struct clk periph_apm_clk;
 static struct clk ahb_clk;
 static struct clk ipg_clk;
 static struct clk usboh3_clk;
+static struct clk emi_fast_clk;
+static struct clk ipu_clk;
+static struct clk mipi_hsc1_clk;
 
 #define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
 
@@ -123,7 +127,7 @@ static inline u32 _get_mux(struct clk *parent, struct clk *m0,
 	return -EINVAL;
 }
 
-static inline void __iomem *_get_pll_base(struct clk *pll)
+static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
 {
 	if (pll == &pll1_main_clk)
 		return MX51_DPLL1_BASE;
@@ -137,6 +141,30 @@ static inline void __iomem *_get_pll_base(struct clk *pll)
 	return NULL;
 }
 
+static inline void __iomem *_mx53_get_pll_base(struct clk *pll)
+{
+	if (pll == &pll1_main_clk)
+		return MX53_DPLL1_BASE;
+	else if (pll == &pll2_sw_clk)
+		return MX53_DPLL2_BASE;
+	else if (pll == &pll3_sw_clk)
+		return MX53_DPLL3_BASE;
+	else if (pll == &mx53_pll4_sw_clk)
+		return MX53_DPLL4_BASE;
+	else
+		BUG();
+
+	return NULL;
+}
+
+static inline void __iomem *_get_pll_base(struct clk *pll)
+{
+	if (cpu_is_mx51())
+		return _mx51_get_pll_base(pll);
+	else
+		return _mx53_get_pll_base(pll);
+}
+
 static unsigned long clk_pll_get_rate(struct clk *clk)
 {
 	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
@@ -514,7 +542,10 @@ static int _clk_max_enable(struct clk *clk)
 
 	/* Handshake with MAX when LPM is entered. */
 	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+	if (cpu_is_mx51())
+		reg &= ~MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+	else if (cpu_is_mx53())
+		reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
 	__raw_writel(reg, MXC_CCM_CLPCR);
 
 	return 0;
@@ -528,7 +559,10 @@ static void _clk_max_disable(struct clk *clk)
 
 	/* No Handshake with MAX when LPM is entered as its disabled. */
 	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+	if (cpu_is_mx51())
+		reg |= MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
+	else if (cpu_is_mx53())
+		reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
 	__raw_writel(reg, MXC_CCM_CLPCR);
 }
 
@@ -679,6 +713,19 @@ static unsigned long clk_emi_slow_get_rate(struct clk *clk)
 	return clk_get_rate(clk->parent) / div;
 }
 
+static unsigned long _clk_ddr_hf_get_rate(struct clk *clk)
+{
+	unsigned long rate;
+	u32 reg, div;
+
+	reg = __raw_readl(MXC_CCM_CBCDR);
+	div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >>
+		MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1;
+	rate = clk_get_rate(clk->parent) / div;
+
+	return rate;
+}
+
 /* External high frequency clock */
 static struct clk ckih_clk = {
 	.get_rate = get_high_reference_clock_rate,
@@ -739,6 +786,14 @@ static struct clk pll3_sw_clk = {
 	.disable = _clk_pll_disable,
 };
 
+/* PLL4 SW supplies to LVDS Display Bridge(LDB) */
+static struct clk mx53_pll4_sw_clk = {
+	.parent = &osc_clk,
+	.set_rate = _clk_pll_set_rate,
+	.enable = _clk_pll_enable,
+	.disable = _clk_pll_disable,
+};
+
 /* Low-power Audio Playback Mode clock */
 static struct clk lp_apm_clk = {
 	.parent = &osc_clk,
@@ -763,6 +818,12 @@ static struct clk ahb_clk = {
 	.round_rate = _clk_ahb_round_rate,
 };
 
+static struct clk iim_clk = {
+	.parent = &ipg_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG15_OFFSET,
+};
+
 /* Main IP interface clock for access to registers */
 static struct clk ipg_clk = {
 	.parent = &ahb_clk,
@@ -810,6 +871,10 @@ static struct clk kpp_clk = {
 	.id = 0,
 };
 
+static struct clk dummy_clk = {
+	.id = 0,
+};
+
 static struct clk emi_slow_clk = {
 	.parent = &pll2_sw_clk,
 	.enable_reg = MXC_CCM_CCGR5,
@@ -819,6 +884,109 @@ static struct clk emi_slow_clk = {
 	.get_rate = clk_emi_slow_get_rate,
 };
 
+static int clk_ipu_enable(struct clk *clk)
+{
+	u32 reg;
+
+	_clk_ccgr_enable(clk);
+
+	/* Enable handshake with IPU when certain clock rates are changed */
+	reg = __raw_readl(MXC_CCM_CCDR);
+	reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
+	__raw_writel(reg, MXC_CCM_CCDR);
+
+	/* Enable handshake with IPU when LPM is entered */
+	reg = __raw_readl(MXC_CCM_CLPCR);
+	reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
+	__raw_writel(reg, MXC_CCM_CLPCR);
+
+	return 0;
+}
+
+static void clk_ipu_disable(struct clk *clk)
+{
+	u32 reg;
+
+	_clk_ccgr_disable(clk);
+
+	/* Disable handshake with IPU whe dividers are changed */
+	reg = __raw_readl(MXC_CCM_CCDR);
+	reg |= MXC_CCM_CCDR_IPU_HS_MASK;
+	__raw_writel(reg, MXC_CCM_CCDR);
+
+	/* Disable handshake with IPU when LPM is entered */
+	reg = __raw_readl(MXC_CCM_CLPCR);
+	reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
+	__raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static struct clk ahbmux1_clk = {
+	.parent = &ahb_clk,
+	.secondary = &ahb_max_clk,
+	.enable_reg = MXC_CCM_CCGR0,
+	.enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable_inwait,
+};
+
+static struct clk ipu_sec_clk = {
+	.parent = &emi_fast_clk,
+	.secondary = &ahbmux1_clk,
+};
+
+static struct clk ddr_hf_clk = {
+	.parent = &pll1_sw_clk,
+	.get_rate = _clk_ddr_hf_get_rate,
+};
+
+static struct clk ddr_clk = {
+	.parent = &ddr_hf_clk,
+};
+
+/* clock definitions for MIPI HSC unit which has been removed
+ * from documentation, but not from hardware
+ */
+static int _clk_hsc_enable(struct clk *clk)
+{
+	u32 reg;
+
+	_clk_ccgr_enable(clk);
+	/* Handshake with IPU when certain clock rates are changed. */
+	reg = __raw_readl(MXC_CCM_CCDR);
+	reg &= ~MXC_CCM_CCDR_HSC_HS_MASK;
+	__raw_writel(reg, MXC_CCM_CCDR);
+
+	reg = __raw_readl(MXC_CCM_CLPCR);
+	reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
+	__raw_writel(reg, MXC_CCM_CLPCR);
+
+	return 0;
+}
+
+static void _clk_hsc_disable(struct clk *clk)
+{
+	u32 reg;
+
+	_clk_ccgr_disable(clk);
+	/* No handshake with HSC as its not enabled. */
+	reg = __raw_readl(MXC_CCM_CCDR);
+	reg |= MXC_CCM_CCDR_HSC_HS_MASK;
+	__raw_writel(reg, MXC_CCM_CCDR);
+
+	reg = __raw_readl(MXC_CCM_CLPCR);
+	reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
+	__raw_writel(reg, MXC_CCM_CLPCR);
+}
+
+static struct clk mipi_hsp_clk = {
+	.parent = &ipu_clk,
+	.enable_reg = MXC_CCM_CCGR4,
+	.enable_shift = MXC_CCM_CCGRx_CG6_OFFSET,
+	.enable = _clk_hsc_enable,
+	.disable = _clk_hsc_disable,
+	.secondary = &mipi_hsc1_clk,
+};
+
 #define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
@@ -927,6 +1095,41 @@ static struct clk usboh3_clk = {
 	.parent = &pll2_sw_clk,
 	.get_rate = clk_usboh3_get_rate,
 	.set_parent = clk_usboh3_set_parent,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable,
+	.enable_reg = MXC_CCM_CCGR2,
+	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
+};
+
+static struct clk usb_ahb_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_ccgr_enable,
+	.disable = _clk_ccgr_disable,
+	.enable_reg = MXC_CCM_CCGR2,
+	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
+};
+
+static int clk_usb_phy1_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 reg;
+
+	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USB_PHY_CLK_SEL;
+
+	if (parent == &pll3_sw_clk)
+		reg |= 1 << MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET;
+
+	__raw_writel(reg, MXC_CCM_CSCMR1);
+
+	return 0;
+}
+
+static struct clk usb_phy1_clk = {
+	.parent = &pll3_sw_clk,
+	.set_parent = clk_usb_phy1_set_parent,
+	.enable = _clk_ccgr_enable,
+	.enable_reg = MXC_CCM_CCGR2,
+	.enable_shift = MXC_CCM_CCGRx_CG0_OFFSET,
+	.disable = _clk_ccgr_disable,
 };
 
 /* eCSPI */
@@ -1013,6 +1216,10 @@ DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
 	NULL, NULL, &ipg_clk, NULL);
 DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
 	NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
+DEFINE_CLOCK(ssi3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG12_OFFSET,
+	NULL, NULL, &ipg_clk, NULL);
+DEFINE_CLOCK(ssi3_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG13_OFFSET,
+	NULL, NULL, &pll3_sw_clk, &ssi3_ipg_clk);
 
 /* eCSPI */
 DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
@@ -1046,6 +1253,23 @@ DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
 DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
 	clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
 
+DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
+DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
+DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
+
+/* IPU */
+DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET,
+	NULL,  NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk);
+
+DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET,
+		NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait,
+		&ddr_clk, NULL);
+
+DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
+		NULL, NULL, &pll3_sw_clk, NULL);
+DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
+		NULL, NULL, &pll3_sw_clk, NULL);
+
 #define _REGISTER_CLOCK(d, n, c) \
        { \
 		.dev_id = d, \
@@ -1053,7 +1277,7 @@ DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
 		.clk = &c,   \
        },
 
-static struct clk_lookup lookups[] = {
+static struct clk_lookup mx51_lookups[] = {
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
@@ -1063,15 +1287,19 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
 	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_ahb_clk)
+	_REGISTER_CLOCK("mxc-ehci.0", "usb_phy1", usb_phy1_clk)
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", ahb_clk)
+	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_ahb_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk)
+	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
 	_REGISTER_CLOCK("imx-keypad.0", NULL, kpp_clk)
 	_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
 	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
 	_REGISTER_CLOCK("imx-sdma", NULL, sdma_clk)
 	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
 	_REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
@@ -1082,6 +1310,22 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
 	_REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
+	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
+	_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
+	_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
+	_REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk)
+	_REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
+	_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
+	_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
+};
+
+static struct clk_lookup mx53_lookups[] = {
+	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
+	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
+	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
+	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
 };
 
 static void clk_tree_init(void)
@@ -1114,14 +1358,22 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 	ckih2_reference = ckih2;
 	oscillator_reference = osc;
 
-	for (i = 0; i < ARRAY_SIZE(lookups); i++)
-		clkdev_add(&lookups[i]);
+	for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++)
+		clkdev_add(&mx51_lookups[i]);
 
 	clk_tree_init();
 
+	clk_set_parent(&uart_root_clk, &pll3_sw_clk);
 	clk_enable(&cpu_clk);
 	clk_enable(&main_bus_clk);
 
+	clk_enable(&iim_clk);
+	mx51_revision();
+	clk_disable(&iim_clk);
+
+	/* move usb_phy_clk to 24MHz */
+	clk_set_parent(&usb_phy1_clk, &osc_clk);
+
 	/* set the usboh3_clk parent to pll2_sw_clk */
 	clk_set_parent(&usboh3_clk, &pll2_sw_clk);
 
@@ -1138,3 +1390,31 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 		MX51_MXC_INT_GPT);
 	return 0;
 }
+
+int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
+			unsigned long ckih1, unsigned long ckih2)
+{
+	int i;
+
+	external_low_reference = ckil;
+	external_high_reference = ckih1;
+	ckih2_reference = ckih2;
+	oscillator_reference = osc;
+
+	for (i = 0; i < ARRAY_SIZE(mx53_lookups); i++)
+		clkdev_add(&mx53_lookups[i]);
+
+	clk_tree_init();
+
+	clk_enable(&cpu_clk);
+	clk_enable(&main_bus_clk);
+
+	clk_enable(&iim_clk);
+	mx53_revision();
+	clk_disable(&iim_clk);
+
+	/* System timer */
+	mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
+		MX53_INT_GPT);
+	return 0;
+}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
index eaacb6e9b5d..d40671da437 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-mx5/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
@@ -20,37 +20,18 @@
 
 static int cpu_silicon_rev = -1;
 
-#define SI_REV 0x48
+#define IIM_SREV 0x24
 
-static void query_silicon_parameter(void)
+static int get_mx51_srev(void)
 {
-	void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE);
-	u32 rev;
+	void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
+	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
 
-	if (!rom) {
-		cpu_silicon_rev = -EINVAL;
-		return;
-	}
-
-	rev = readl(rom + SI_REV);
-	switch (rev) {
-	case 0x1:
-		cpu_silicon_rev = MX51_CHIP_REV_1_0;
-		break;
-	case 0x2:
-		cpu_silicon_rev = MX51_CHIP_REV_1_1;
-		break;
-	case 0x10:
-		cpu_silicon_rev = MX51_CHIP_REV_2_0;
-		break;
-	case 0x20:
-		cpu_silicon_rev = MX51_CHIP_REV_3_0;
-		break;
-	default:
-		cpu_silicon_rev = 0;
-	}
-
-	iounmap(rom);
+	if (rev == 0x0)
+		return IMX_CHIP_REVISION_2_0;
+	else if (rev == 0x10)
+		return IMX_CHIP_REVISION_3_0;
+	return 0;
 }
 
 /*
@@ -64,7 +45,7 @@ int mx51_revision(void)
 		return -EINVAL;
 
 	if (cpu_silicon_rev == -1)
-		query_silicon_parameter();
+		cpu_silicon_rev = get_mx51_srev();
 
 	return cpu_silicon_rev;
 }
@@ -79,7 +60,10 @@ EXPORT_SYMBOL(mx51_revision);
  */
 static int __init mx51_neon_fixup(void)
 {
-	if (mx51_revision() < MX51_CHIP_REV_3_0 && (elf_hwcap & HWCAP_NEON)) {
+	if (!cpu_is_mx51())
+		return 0;
+
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
 		elf_hwcap &= ~HWCAP_NEON;
 		pr_info("Turning off NEON support, detected broken NEON implementation\n");
 	}
@@ -89,29 +73,65 @@ static int __init mx51_neon_fixup(void)
 late_initcall(mx51_neon_fixup);
 #endif
 
+static int get_mx53_srev(void)
+{
+	void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
+	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
+
+	if (rev == 0x0)
+		return IMX_CHIP_REVISION_1_0;
+	else if (rev == 0x10)
+		return IMX_CHIP_REVISION_2_0;
+	return 0;
+}
+
+/*
+ * Returns:
+ *	the silicon revision of the cpu
+ *	-EINVAL - not a mx53
+ */
+int mx53_revision(void)
+{
+	if (!cpu_is_mx53())
+		return -EINVAL;
+
+	if (cpu_silicon_rev == -1)
+		cpu_silicon_rev = get_mx53_srev();
+
+	return cpu_silicon_rev;
+}
+EXPORT_SYMBOL(mx53_revision);
+
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;
 	void __iomem *base;
 
-	if (!cpu_is_mx51())
-		return 0;
-
-	base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
-	__raw_writel(0x0, base + 0x40);
-	__raw_writel(0x0, base + 0x44);
-	__raw_writel(0x0, base + 0x48);
-	__raw_writel(0x0, base + 0x4C);
-	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
-	__raw_writel(reg, base + 0x50);
-
-	base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
-	__raw_writel(0x0, base + 0x40);
-	__raw_writel(0x0, base + 0x44);
-	__raw_writel(0x0, base + 0x48);
-	__raw_writel(0x0, base + 0x4C);
-	reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
-	__raw_writel(reg, base + 0x50);
+	if (cpu_is_mx51() || cpu_is_mx53()) {
+		if (cpu_is_mx51())
+			base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
+		else
+			base = MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR);
+
+		__raw_writel(0x0, base + 0x40);
+		__raw_writel(0x0, base + 0x44);
+		__raw_writel(0x0, base + 0x48);
+		__raw_writel(0x0, base + 0x4C);
+		reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+		__raw_writel(reg, base + 0x50);
+
+		if (cpu_is_mx51())
+			base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
+		else
+			base = MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR);
+
+		__raw_writel(0x0, base + 0x40);
+		__raw_writel(0x0, base + 0x44);
+		__raw_writel(0x0, base + 0x48);
+		__raw_writel(0x0, base + 0x4C);
+		reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
+		__raw_writel(reg, base + 0x50);
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
index c776b9af062..b462c22f53d 100644
--- a/arch/arm/mach-mx5/crm_regs.h
+++ b/arch/arm/mach-mx5/crm_regs.h
@@ -18,6 +18,13 @@
 #define MX51_CORTEXA8_BASE	MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
 #define MX51_GPC_BASE		MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
 
+/*MX53*/
+#define MX53_CCM_BASE		MX53_IO_ADDRESS(MX53_CCM_BASE_ADDR)
+#define MX53_DPLL1_BASE		MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
+#define MX53_DPLL2_BASE		MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
+#define MX53_DPLL3_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+
 /* PLL Register Offsets */
 #define MXC_PLL_DP_CTL			0x00
 #define MXC_PLL_DP_CONFIG		0x04
@@ -380,7 +387,8 @@
 /* Define the bits in register CLPCR */
 #define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS		(0x1 << 23)
 #define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS		(0x1 << 22)
-#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 21)
+#define MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 21)
+#define MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 25)
 #define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS	(0x1 << 20)
 #define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS		(0x1 << 19)
 #define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS		(0x1 << 18)
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
index 8c50cb5d05f..6302e467000 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-mx5/devices-imx51.h
@@ -31,6 +31,11 @@ extern const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst;
 #define imx51_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
 
+extern const struct imx_sdhci_esdhc_imx_data
+imx51_sdhci_esdhc_imx_data[] __initconst;
+#define imx51_add_sdhci_esdhc_imx(id, pdata)	\
+	imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
+
 extern const struct imx_spi_imx_data imx51_cspi_data __initconst;
 #define imx51_add_cspi(pdata)	\
 	imx_add_spi_imx(&imx51_cspi_data, pdata)
@@ -39,6 +44,6 @@ extern const struct imx_spi_imx_data imx51_ecspi_data[] __initconst;
 #define imx51_add_ecspi(id, pdata)	\
 	imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
 
-extern const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst;
-#define imx51_add_esdhc(id, pdata)	\
-	imx_add_esdhc(&imx51_esdhc_data[id], pdata)
+extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst;
+#define imx51_add_imx2_wdt(id, pdata)	\
+	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
new file mode 100644
index 00000000000..9d0ec2507fa
--- /dev/null
+++ b/arch/arm/mach-mx5/devices-imx53.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx53.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst;
+#define imx53_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices-mx50.h b/arch/arm/mach-mx5/devices-mx50.h
new file mode 100644
index 00000000000..98ab07468a0
--- /dev/null
+++ b/arch/arm/mach-mx5/devices-mx50.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <mach/mx50.h>
+#include <mach/devices-common.h>
+
+extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst;
+#define imx50_add_imx_uart(id, pdata)	\
+	imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c
index 4c7be87a7c9..1bda5cb339d 100644
--- a/arch/arm/mach-mx5/devices.c
+++ b/arch/arm/mach-mx5/devices.c
@@ -97,19 +97,27 @@ struct platform_device mxc_usbh1_device = {
 	},
 };
 
-static struct resource mxc_wdt_resources[] = {
+static struct resource usbh2_resources[] = {
 	{
-		.start = MX51_WDOG_BASE_ADDR,
-		.end = MX51_WDOG_BASE_ADDR + SZ_16K - 1,
+		.start = MX51_OTG_BASE_ADDR + 0x400,
+		.end = MX51_OTG_BASE_ADDR + 0x400 + 0x1ff,
 		.flags = IORESOURCE_MEM,
 	},
+	{
+		.start = MX51_MXC_INT_USB_H2,
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
-struct platform_device mxc_wdt = {
-	.name = "imx2-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
-	.resource = mxc_wdt_resources,
+struct platform_device mxc_usbh2_device = {
+	.name = "mxc-ehci",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(usbh2_resources),
+	.resource = usbh2_resources,
+	.dev = {
+		.dma_mask = &usb_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
 };
 
 static struct resource mxc_kpp_resources[] = {
@@ -160,9 +168,36 @@ static struct mxc_gpio_port mxc_gpio_ports[] = {
 		.irq_high = MX51_MXC_INT_GPIO4_HIGH,
 		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3
 	},
+	{
+		.chip.label = "gpio-4",
+		.base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR),
+		.irq = MX53_INT_GPIO5_LOW,
+		.irq_high = MX53_INT_GPIO5_HIGH,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4
+	},
+	{
+		.chip.label = "gpio-5",
+		.base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR),
+		.irq = MX53_INT_GPIO6_LOW,
+		.irq_high = MX53_INT_GPIO6_HIGH,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5
+	},
+	{
+		.chip.label = "gpio-6",
+		.base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR),
+		.irq = MX53_INT_GPIO7_LOW,
+		.irq_high = MX53_INT_GPIO7_HIGH,
+		.virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6
+	},
 };
 
 int __init imx51_register_gpios(void)
 {
+	return mxc_gpio_init(mxc_gpio_ports, 4);
+}
+
+int __init imx53_register_gpios(void)
+{
 	return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
 }
+
diff --git a/arch/arm/mach-mx5/devices.h b/arch/arm/mach-mx5/devices.h
index af1d07c0bbc..16891aa3573 100644
--- a/arch/arm/mach-mx5/devices.h
+++ b/arch/arm/mach-mx5/devices.h
@@ -1,6 +1,6 @@
 extern struct platform_device mxc_usbdr_host_device;
 extern struct platform_device mxc_usbh1_device;
+extern struct platform_device mxc_usbh2_device;
 extern struct platform_device mxc_usbdr_udc_device;
-extern struct platform_device mxc_wdt;
 extern struct platform_device mxc_hsi2c_device;
 extern struct platform_device mxc_keypad_device;
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index a2e6e8c39d2..c96d018ff8a 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -33,12 +33,12 @@
 #include "devices-imx51.h"
 #include "devices.h"
 
-#define MBIMX51_TSC2007_GPIO	(2*32 + 30)
+#define MBIMX51_TSC2007_GPIO	IMX_GPIO_NR(3, 30)
 #define MBIMX51_TSC2007_IRQ	(MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
-#define MBIMX51_LED0		(2*32 + 5)
-#define MBIMX51_LED1		(2*32 + 6)
-#define MBIMX51_LED2		(2*32 + 7)
-#define MBIMX51_LED3		(2*32 + 8)
+#define MBIMX51_LED0		IMX_GPIO_NR(3, 5)
+#define MBIMX51_LED1		IMX_GPIO_NR(3, 6)
+#define MBIMX51_LED2		IMX_GPIO_NR(3, 7)
+#define MBIMX51_LED3		IMX_GPIO_NR(3, 8)
 
 static struct gpio_led mbimx51_leds[] = {
 	{
@@ -84,7 +84,7 @@ static struct platform_device *devices[] __initdata = {
 	&mbimx51_leds_gpio,
 };
 
-static struct pad_desc mbimx51_pads[] = {
+static iomux_v3_cfg_t mbimx51_pads[] = {
 	/* UART2 */
 	MX51_PAD_UART2_RXD__UART2_RXD,
 	MX51_PAD_UART2_TXD__UART2_TXD,
@@ -96,13 +96,13 @@ static struct pad_desc mbimx51_pads[] = {
 	MX51_PAD_KEY_COL5__UART3_CTS,
 
 	/* TSC2007 IRQ */
-	MX51_PAD_NANDF_D10__GPIO_3_30,
+	MX51_PAD_NANDF_D10__GPIO3_30,
 
 	/* LEDS */
-	MX51_PAD_DISPB2_SER_DIN__GPIO_3_5,
-	MX51_PAD_DISPB2_SER_DIO__GPIO_3_6,
-	MX51_PAD_DISPB2_SER_CLK__GPIO_3_7,
-	MX51_PAD_DISPB2_SER_RS__GPIO_3_8,
+	MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
+	MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
+	MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
+	MX51_PAD_DISPB2_SER_RS__GPIO3_8,
 
 	/* KPP */
 	MX51_PAD_KEY_ROW0__KEY_ROW0,
@@ -217,6 +217,6 @@ void __init eukrea_mbimx51_baseboard_init(void)
 	i2c_register_board_info(1, mbimx51_i2c_devices,
 				ARRAY_SIZE(mbimx51_i2c_devices));
 
-	imx51_add_esdhc(0, NULL);
-	imx51_add_esdhc(1, NULL);
+	imx51_add_sdhci_esdhc_imx(0, NULL);
+	imx51_add_sdhci_esdhc_imx(1, NULL);
 }
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index 2b48f519083..c372a437369 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -45,14 +45,13 @@
 #include "devices-imx51.h"
 #include "devices.h"
 
-#define MBIMXSD_GPIO_3_31 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, \
-				MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
-
-static struct pad_desc eukrea_mbimxsd_pads[] = {
+static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* LED */
-	MX51_PAD_NANDF_D10__GPIO_3_30,
+	MX51_PAD_NANDF_D10__GPIO3_30,
 	/* SWITCH */
-	MBIMXSD_GPIO_3_31,
+	_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
+			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 	/* UART2 */
 	MX51_PAD_UART2_RXD__UART2_RXD,
 	MX51_PAD_UART2_TXD__UART2_TXD,
@@ -70,8 +69,8 @@ static struct pad_desc eukrea_mbimxsd_pads[] = {
 	MX51_PAD_SD1_DATA3__SD1_DATA3,
 };
 
-#define GPIO_LED1	(2 * 32 + 30)
-#define GPIO_SWITCH1	(2 * 32 + 31)
+#define GPIO_LED1	IMX_GPIO_NR(3, 30)
+#define GPIO_SWITCH1	IMX_GPIO_NR(3, 31)
 
 static struct gpio_led eukrea_mbimxsd_leds[] = {
 	{
@@ -149,7 +148,7 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
 	imx51_add_imx_uart(1, NULL);
 	imx51_add_imx_uart(2, &uart_pdata);
 
-	imx51_add_esdhc(0, NULL);
+	imx51_add_sdhci_esdhc_imx(0, NULL);
 
 	gpio_request(GPIO_LED1, "LED1");
 	gpio_direction_output(GPIO_LED1, 1);
diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
new file mode 100644
index 00000000000..8c6540e5839
--- /dev/null
+++ b/arch/arm/mach-mx5/mm-mx50.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-v3.h>
+
+/*
+ * Define the MX50 memory map.
+ */
+static struct map_desc mx50_io_desc[] __initdata = {
+	imx_map_entry(MX50, TZIC, MT_DEVICE),
+	imx_map_entry(MX50, SPBA0, MT_DEVICE),
+	imx_map_entry(MX50, AIPS1, MT_DEVICE),
+	imx_map_entry(MX50, AIPS2, MT_DEVICE),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx50_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX50);
+	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
+	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
+}
+
+int imx50_register_gpios(void);
+
+void __init mx50_init_irq(void)
+{
+	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
+	imx50_register_gpios();
+}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index bc3f30db8d9..457f9f95204 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
  *
  * The code contained herein is licensed under the GNU General Public
  * License.  You may obtain a copy of the GNU General Public License
@@ -23,33 +23,21 @@
 /*
  * Define the MX51 memory map.
  */
-static struct map_desc mxc_io_desc[] __initdata = {
-	{
-		.virtual = MX51_IRAM_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR),
-		.length = MX51_IRAM_SIZE,
-		.type = MT_DEVICE
-	}, {
-		.virtual = MX51_DEBUG_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
-		.length = MX51_DEBUG_SIZE,
-		.type = MT_DEVICE
-	}, {
-		.virtual = MX51_AIPS1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
-		.length = MX51_AIPS1_SIZE,
-		.type = MT_DEVICE
-	}, {
-		.virtual = MX51_SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR),
-		.length = MX51_SPBA0_SIZE,
-		.type = MT_DEVICE
-	}, {
-		.virtual = MX51_AIPS2_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
-		.length = MX51_AIPS2_SIZE,
-		.type = MT_DEVICE
-	},
+static struct map_desc mx51_io_desc[] __initdata = {
+	imx_map_entry(MX51, IRAM, MT_DEVICE),
+	imx_map_entry(MX51, DEBUG, MT_DEVICE),
+	imx_map_entry(MX51, AIPS1, MT_DEVICE),
+	imx_map_entry(MX51, SPBA0, MT_DEVICE),
+	imx_map_entry(MX51, AIPS2, MT_DEVICE),
+};
+
+/*
+ * Define the MX53 memory map.
+ */
+static struct map_desc mx53_io_desc[] __initdata = {
+	imx_map_entry(MX53, AIPS1, MT_DEVICE),
+	imx_map_entry(MX53, SPBA0, MT_DEVICE),
+	imx_map_entry(MX53, AIPS2, MT_DEVICE),
 };
 
 /*
@@ -61,8 +49,16 @@ void __init mx51_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
+	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
+}
+
+void __init mx53_map_io(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX53);
+	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG_BASE_ADDR));
+	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
 }
 
 int imx51_register_gpios(void);
@@ -72,7 +68,7 @@ void __init mx51_init_irq(void)
 	unsigned long tzic_addr;
 	void __iomem *tzic_virt;
 
-	if (mx51_revision() < MX51_CHIP_REV_2_0)
+	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
 		tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
 	else
 		tzic_addr = MX51_TZIC_BASE_ADDR;
@@ -84,3 +80,20 @@ void __init mx51_init_irq(void)
 	tzic_init_irq(tzic_virt);
 	imx51_register_gpios();
 }
+
+int imx53_register_gpios(void);
+
+void __init mx53_init_irq(void)
+{
+	unsigned long tzic_addr;
+	void __iomem *tzic_virt;
+
+	tzic_addr = MX53_TZIC_BASE_ADDR;
+
+	tzic_virt = ioremap(tzic_addr, SZ_16K);
+	if (!tzic_virt)
+		panic("unable to map TZIC interrupt controller\n");
+
+	tzic_init_irq(tzic_virt);
+	imx53_register_gpios();
+}
diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c
index 5c85075d8a5..9fab505f1eb 100644
--- a/arch/arm/mach-mxc91231/clock.c
+++ b/arch/arm/mach-mxc91231/clock.c
@@ -2,12 +2,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/clkdev.h>
 
 #include <mach/clock.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 
-#include <asm/clkdev.h>
 #include <asm/bug.h>
 #include <asm/div64.h>
 
diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c
index aeccfd755fe..7652c301da8 100644
--- a/arch/arm/mach-mxc91231/mm.c
+++ b/arch/arm/mach-mxc91231/mm.c
@@ -27,48 +27,15 @@
 /*
  * This structure defines the MXC memory map.
  */
-static struct map_desc mxc_io_desc[] __initdata = {
-	{
-		.virtual	= MXC91231_L2CC_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MXC91231_L2CC_BASE_ADDR),
-		.length		= MXC91231_L2CC_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MXC91231_X_MEMC_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MXC91231_X_MEMC_BASE_ADDR),
-		.length		= MXC91231_X_MEMC_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MXC91231_ROMP_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MXC91231_ROMP_BASE_ADDR),
-		.length		= MXC91231_ROMP_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MXC91231_AVIC_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MXC91231_AVIC_BASE_ADDR),
-		.length		= MXC91231_AVIC_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MXC91231_AIPS1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MXC91231_AIPS1_BASE_ADDR),
-		.length		= MXC91231_AIPS1_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MXC91231_SPBA0_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MXC91231_SPBA0_BASE_ADDR),
-		.length		= MXC91231_SPBA0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MXC91231_SPBA1_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MXC91231_SPBA1_BASE_ADDR),
-		.length		= MXC91231_SPBA1_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= MXC91231_AIPS2_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(MXC91231_AIPS2_BASE_ADDR),
-		.length		= MXC91231_AIPS2_SIZE,
-		.type		= MT_DEVICE,
-	},
+static struct map_desc mxc91231_io_desc[] __initdata = {
+	imx_map_entry(MXC91231, L2CC, MT_DEVICE),
+	imx_map_entry(MXC91231, X_MEMC, MT_DEVICE),
+	imx_map_entry(MXC91231, ROMP, MT_DEVICE),
+	imx_map_entry(MXC91231, AVIC, MT_DEVICE),
+	imx_map_entry(MXC91231, AIPS1, MT_DEVICE),
+	imx_map_entry(MXC91231, SPBA0, MT_DEVICE),
+	imx_map_entry(MXC91231, SPBA1, MT_DEVICE),
+	imx_map_entry(MXC91231, AIPS2, MT_DEVICE),
 };
 
 /*
@@ -80,7 +47,7 @@ void __init mxc91231_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MXC91231);
 
-	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+	iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc));
 }
 
 int mxc91231_register_gpios(void);
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
new file mode 100644
index 00000000000..c4ac7b41519
--- /dev/null
+++ b/arch/arm/mach-mxs/Kconfig
@@ -0,0 +1,34 @@
+if ARCH_MXS
+
+source "arch/arm/mach-mxs/devices/Kconfig"
+
+config SOC_IMX23
+	bool
+	select CPU_ARM926T
+
+config SOC_IMX28
+	bool
+	select CPU_ARM926T
+
+comment "MXS platforms:"
+
+config MACH_MX23EVK
+	bool "Support MX23EVK Platform"
+	select SOC_IMX23
+	select MXS_HAVE_PLATFORM_DUART
+	default y
+	help
+	  Include support for MX23EVK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX28EVK
+	bool "Support MX28EVK Platform"
+	select SOC_IMX28
+	select MXS_HAVE_PLATFORM_DUART
+	select MXS_HAVE_PLATFORM_FEC
+	default y
+	help
+	  Include support for MX28EVK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
new file mode 100644
index 00000000000..39d3f9c2a84
--- /dev/null
+++ b/arch/arm/mach-mxs/Makefile
@@ -0,0 +1,10 @@
+# Common support
+obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
+
+obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
+obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
+
+obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
+obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
+
+obj-y += devices/
diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot
new file mode 100644
index 00000000000..eb541e0291d
--- /dev/null
+++ b/arch/arm/mach-mxs/Makefile.boot
@@ -0,0 +1 @@
+zreladdr-y := 0x40008000
diff --git a/arch/arm/mach-mxs/clock-mx23.c b/arch/arm/mach-mxs/clock-mx23.c
new file mode 100644
index 00000000000..8f5a19ab558
--- /dev/null
+++ b/arch/arm/mach-mxs/clock-mx23.c
@@ -0,0 +1,526 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/mx23.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "regs-clkctrl-mx23.h"
+
+#define CLKCTRL_BASE_ADDR	MX23_IO_ADDRESS(MX23_CLKCTRL_BASE_ADDR)
+#define DIGCTRL_BASE_ADDR	MX23_IO_ADDRESS(MX23_DIGCTL_BASE_ADDR)
+
+#define PARENT_RATE_SHIFT	8
+
+static int _raw_clk_enable(struct clk *clk)
+{
+	u32 reg;
+
+	if (clk->enable_reg) {
+		reg = __raw_readl(clk->enable_reg);
+		reg &= ~(1 << clk->enable_shift);
+		__raw_writel(reg, clk->enable_reg);
+	}
+
+	return 0;
+}
+
+static void _raw_clk_disable(struct clk *clk)
+{
+	u32 reg;
+
+	if (clk->enable_reg) {
+		reg = __raw_readl(clk->enable_reg);
+		reg |= 1 << clk->enable_shift;
+		__raw_writel(reg, clk->enable_reg);
+	}
+}
+
+/*
+ * ref_xtal_clk
+ */
+static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
+{
+	return 24000000;
+}
+
+static struct clk ref_xtal_clk = {
+	.get_rate = ref_xtal_clk_get_rate,
+};
+
+/*
+ * pll_clk
+ */
+static unsigned long pll_clk_get_rate(struct clk *clk)
+{
+	return 480000000;
+}
+
+static int pll_clk_enable(struct clk *clk)
+{
+	__raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
+			BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_SET);
+
+	/* Only a 10us delay is need. PLLCTRL1 LOCK bitfied is only a timer
+	 * and is incorrect (excessive). Per definition of the PLLCTRL0
+	 * POWER field, waiting at least 10us.
+	 */
+	udelay(10);
+
+	return 0;
+}
+
+static void pll_clk_disable(struct clk *clk)
+{
+	__raw_writel(BM_CLKCTRL_PLLCTRL0_POWER |
+			BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS,
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_PLLCTRL0_CLR);
+}
+
+static struct clk pll_clk = {
+	 .get_rate = pll_clk_get_rate,
+	 .enable = pll_clk_enable,
+	 .disable = pll_clk_disable,
+	 .parent = &ref_xtal_clk,
+};
+
+/*
+ * ref_clk
+ */
+#define _CLK_GET_RATE_REF(name, sr, ss)					\
+static unsigned long name##_get_rate(struct clk *clk)			\
+{									\
+	unsigned long parent_rate;					\
+	u32 reg, div;							\
+									\
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr);		\
+	div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f;		\
+	parent_rate = clk_get_rate(clk->parent);			\
+									\
+	return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18,		\
+			div, PARENT_RATE_SHIFT);			\
+}
+
+_CLK_GET_RATE_REF(ref_cpu_clk, FRAC, CPU)
+_CLK_GET_RATE_REF(ref_emi_clk, FRAC, EMI)
+_CLK_GET_RATE_REF(ref_pix_clk, FRAC, PIX)
+_CLK_GET_RATE_REF(ref_io_clk, FRAC, IO)
+
+#define _DEFINE_CLOCK_REF(name, er, es)					\
+	static struct clk name = {					\
+		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
+		.enable_shift	= BP_CLKCTRL_##er##_CLKGATE##es,	\
+		.get_rate	= name##_get_rate,			\
+		.enable		= _raw_clk_enable,			\
+		.disable	= _raw_clk_disable,			\
+		.parent		= &pll_clk,				\
+	}
+
+_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC, CPU);
+_DEFINE_CLOCK_REF(ref_emi_clk, FRAC, EMI);
+_DEFINE_CLOCK_REF(ref_pix_clk, FRAC, PIX);
+_DEFINE_CLOCK_REF(ref_io_clk, FRAC, IO);
+
+/*
+ * General clocks
+ *
+ * clk_get_rate
+ */
+static unsigned long rtc_clk_get_rate(struct clk *clk)
+{
+	/* ref_xtal_clk is implemented as the only parent */
+	return clk_get_rate(clk->parent) / 768;
+}
+
+static unsigned long clk32k_clk_get_rate(struct clk *clk)
+{
+	return clk->parent->get_rate(clk->parent) / 750;
+}
+
+#define _CLK_GET_RATE(name, rs)						\
+static unsigned long name##_get_rate(struct clk *clk)			\
+{									\
+	u32 reg, div;							\
+									\
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
+									\
+	if (clk->parent == &ref_xtal_clk)				\
+		div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >>		\
+			BP_CLKCTRL_##rs##_DIV_XTAL;			\
+	else								\
+		div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >>		\
+			BP_CLKCTRL_##rs##_DIV_##rs;			\
+									\
+	if (!div)							\
+		return -EINVAL;						\
+									\
+	return clk_get_rate(clk->parent) / div;				\
+}
+
+_CLK_GET_RATE(cpu_clk, CPU)
+_CLK_GET_RATE(emi_clk, EMI)
+
+#define _CLK_GET_RATE1(name, rs)					\
+static unsigned long name##_get_rate(struct clk *clk)			\
+{									\
+	u32 reg, div;							\
+									\
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
+	div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV;	\
+									\
+	if (!div)							\
+		return -EINVAL;						\
+									\
+	return clk_get_rate(clk->parent) / div;				\
+}
+
+_CLK_GET_RATE1(hbus_clk, HBUS)
+_CLK_GET_RATE1(xbus_clk, XBUS)
+_CLK_GET_RATE1(ssp_clk, SSP)
+_CLK_GET_RATE1(gpmi_clk, GPMI)
+_CLK_GET_RATE1(lcdif_clk, PIX)
+
+#define _CLK_GET_RATE_STUB(name)					\
+static unsigned long name##_get_rate(struct clk *clk)			\
+{									\
+	return clk_get_rate(clk->parent);				\
+}
+
+_CLK_GET_RATE_STUB(uart_clk)
+_CLK_GET_RATE_STUB(audio_clk)
+_CLK_GET_RATE_STUB(pwm_clk)
+
+/*
+ * clk_set_rate
+ */
+static int cpu_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, bm_busy, div_max, d, f, div, frac;
+	unsigned long diff, parent_rate, calc_rate;
+	int i;
+
+	parent_rate = clk_get_rate(clk->parent);
+
+	if (clk->parent == &ref_xtal_clk) {
+		div_max = BM_CLKCTRL_CPU_DIV_XTAL >> BP_CLKCTRL_CPU_DIV_XTAL;
+		bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;
+		div = DIV_ROUND_UP(parent_rate, rate);
+		if (div == 0 || div > div_max)
+			return -EINVAL;
+	} else {
+		div_max = BM_CLKCTRL_CPU_DIV_CPU >> BP_CLKCTRL_CPU_DIV_CPU;
+		bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;
+		rate >>= PARENT_RATE_SHIFT;
+		parent_rate >>= PARENT_RATE_SHIFT;
+		diff = parent_rate;
+		div = frac = 1;
+		for (d = 1; d <= div_max; d++) {
+			f = parent_rate * 18 / d / rate;
+			if ((parent_rate * 18 / d) % rate)
+				f++;
+			if (f < 18 || f > 35)
+				continue;
+
+			calc_rate = parent_rate * 18 / f / d;
+			if (calc_rate > rate)
+				continue;
+
+			if (rate - calc_rate < diff) {
+				frac = f;
+				div = d;
+				diff = rate - calc_rate;
+			}
+
+			if (diff == 0)
+				break;
+		}
+
+		if (diff == parent_rate)
+			return -EINVAL;
+
+		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+		reg &= ~BM_CLKCTRL_FRAC_CPUFRAC;
+		reg |= frac;
+		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_FRAC);
+	}
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
+	reg &= ~BM_CLKCTRL_CPU_DIV_CPU;
+	reg |= div << BP_CLKCTRL_CPU_DIV_CPU;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);
+
+	for (i = 10000; i; i--)
+		if (!(__raw_readl(CLKCTRL_BASE_ADDR +
+					HW_CLKCTRL_CPU) & bm_busy))
+			break;
+	if (!i)	{
+		pr_err("%s: divider writing timeout\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+#define _CLK_SET_RATE(name, dr)						\
+static int name##_set_rate(struct clk *clk, unsigned long rate)		\
+{									\
+	u32 reg, div_max, div;						\
+	unsigned long parent_rate;					\
+	int i;								\
+									\
+	parent_rate = clk_get_rate(clk->parent);			\
+	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
+									\
+	div = DIV_ROUND_UP(parent_rate, rate);				\
+	if (div == 0 || div > div_max)					\
+		return -EINVAL;						\
+									\
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
+	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
+	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
+	if (reg | (1 << clk->enable_shift)) {				\
+		pr_err("%s: clock is gated\n", __func__);		\
+		return -EINVAL;						\
+	}								\
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
+									\
+	for (i = 10000; i; i--)						\
+		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
+			HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY))	\
+			break;						\
+	if (!i)	{							\
+		pr_err("%s: divider writing timeout\n", __func__);	\
+		return -ETIMEDOUT;					\
+	}								\
+									\
+	return 0;							\
+}
+
+_CLK_SET_RATE(xbus_clk, XBUS)
+_CLK_SET_RATE(ssp_clk, SSP)
+_CLK_SET_RATE(gpmi_clk, GPMI)
+_CLK_SET_RATE(lcdif_clk, PIX)
+
+#define _CLK_SET_RATE_STUB(name)					\
+static int name##_set_rate(struct clk *clk, unsigned long rate)		\
+{									\
+	return -EINVAL;							\
+}
+
+_CLK_SET_RATE_STUB(emi_clk)
+_CLK_SET_RATE_STUB(uart_clk)
+_CLK_SET_RATE_STUB(audio_clk)
+_CLK_SET_RATE_STUB(pwm_clk)
+_CLK_SET_RATE_STUB(clk32k_clk)
+
+/*
+ * clk_set_parent
+ */
+#define _CLK_SET_PARENT(name, bit)					\
+static int name##_set_parent(struct clk *clk, struct clk *parent)	\
+{									\
+	if (parent != clk->parent) {					\
+		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
+			 HW_CLKCTRL_CLKSEQ_TOG);			\
+		clk->parent = parent;					\
+	}								\
+									\
+	return 0;							\
+}
+
+_CLK_SET_PARENT(cpu_clk, CPU)
+_CLK_SET_PARENT(emi_clk, EMI)
+_CLK_SET_PARENT(ssp_clk, SSP)
+_CLK_SET_PARENT(gpmi_clk, GPMI)
+_CLK_SET_PARENT(lcdif_clk, PIX)
+
+#define _CLK_SET_PARENT_STUB(name)					\
+static int name##_set_parent(struct clk *clk, struct clk *parent)	\
+{									\
+	if (parent != clk->parent)					\
+		return -EINVAL;						\
+	else								\
+		return 0;						\
+}
+
+_CLK_SET_PARENT_STUB(uart_clk)
+_CLK_SET_PARENT_STUB(audio_clk)
+_CLK_SET_PARENT_STUB(pwm_clk)
+_CLK_SET_PARENT_STUB(clk32k_clk)
+
+/*
+ * clk definition
+ */
+static struct clk cpu_clk = {
+	.get_rate = cpu_clk_get_rate,
+	.set_rate = cpu_clk_set_rate,
+	.set_parent = cpu_clk_set_parent,
+	.parent = &ref_cpu_clk,
+};
+
+static struct clk hbus_clk = {
+	.get_rate = hbus_clk_get_rate,
+	.parent = &cpu_clk,
+};
+
+static struct clk xbus_clk = {
+	.get_rate = xbus_clk_get_rate,
+	.set_rate = xbus_clk_set_rate,
+	.parent = &ref_xtal_clk,
+};
+
+static struct clk rtc_clk = {
+	.get_rate = rtc_clk_get_rate,
+	.parent = &ref_xtal_clk,
+};
+
+/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
+static struct clk usb_clk = {
+	.enable_reg = DIGCTRL_BASE_ADDR,
+	.enable_shift = 2,
+	.enable = _raw_clk_enable,
+	.disable = _raw_clk_disable,
+	.parent = &pll_clk,
+};
+
+#define _DEFINE_CLOCK(name, er, es, p)					\
+	static struct clk name = {					\
+		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
+		.enable_shift	= BP_CLKCTRL_##er##_##es,		\
+		.get_rate	= name##_get_rate,			\
+		.set_rate	= name##_set_rate,			\
+		.set_parent	= name##_set_parent,			\
+		.enable		= _raw_clk_enable,			\
+		.disable	= _raw_clk_disable,			\
+		.parent		= p,					\
+	}
+
+_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(ssp_clk, SSP, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(lcdif_clk, PIX, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(audio_clk, XTAL, FILT_CLK24M_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk)
+	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
+	_REGISTER_CLOCK(NULL, "hclk", hbus_clk)
+	_REGISTER_CLOCK(NULL, "xclk", xbus_clk)
+	_REGISTER_CLOCK(NULL, "usb", usb_clk)
+	_REGISTER_CLOCK(NULL, "audio", audio_clk)
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+};
+
+static int clk_misc_init(void)
+{
+	u32 reg;
+	int i;
+
+	/* Fix up parent per register setting */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
+	cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
+			&ref_xtal_clk : &ref_cpu_clk;
+	emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
+			&ref_xtal_clk : &ref_emi_clk;
+	ssp_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP) ?
+			&ref_xtal_clk : &ref_io_clk;
+	gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
+			&ref_xtal_clk : &ref_io_clk;
+	lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_PIX) ?
+			&ref_xtal_clk : &ref_pix_clk;
+
+	/* Use int div over frac when both are available */
+	__raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
+	__raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
+	__raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
+	reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
+	reg &= ~BM_CLKCTRL_SSP_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
+	reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
+	reg &= ~BM_CLKCTRL_PIX_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_PIX);
+
+	/*
+	 * Set safe hbus clock divider. A divider of 3 ensure that
+	 * the Vddd voltage required for the cpu clock is sufficiently
+	 * high for the hbus clock.
+	 */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
+	reg &= BM_CLKCTRL_HBUS_DIV;
+	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
+
+	for (i = 10000; i; i--)
+		if (!(__raw_readl(CLKCTRL_BASE_ADDR +
+			HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_BUSY))
+			break;
+	if (!i) {
+		pr_err("%s: divider writing timeout\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	/* Gate off cpu clock in WFI for power saving */
+	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
+
+	return 0;
+}
+
+int __init mx23_clocks_init(void)
+{
+	clk_misc_init();
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	mxs_timer_init(&clk32k_clk, MX23_INT_TIMER0);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
new file mode 100644
index 00000000000..74e2103c601
--- /dev/null
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -0,0 +1,734 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+
+#include <asm/clkdev.h>
+#include <asm/div64.h>
+
+#include <mach/mx28.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+
+#include "regs-clkctrl-mx28.h"
+
+#define CLKCTRL_BASE_ADDR	MX28_IO_ADDRESS(MX28_CLKCTRL_BASE_ADDR)
+#define DIGCTRL_BASE_ADDR	MX28_IO_ADDRESS(MX28_DIGCTL_BASE_ADDR)
+
+#define PARENT_RATE_SHIFT	8
+
+static struct clk pll2_clk;
+static struct clk cpu_clk;
+static struct clk emi_clk;
+static struct clk saif0_clk;
+static struct clk saif1_clk;
+static struct clk clk32k_clk;
+
+static int _raw_clk_enable(struct clk *clk)
+{
+	u32 reg;
+
+	if (clk->enable_reg) {
+		reg = __raw_readl(clk->enable_reg);
+		reg &= ~(1 << clk->enable_shift);
+		__raw_writel(reg, clk->enable_reg);
+	}
+
+	return 0;
+}
+
+static void _raw_clk_disable(struct clk *clk)
+{
+	u32 reg;
+
+	if (clk->enable_reg) {
+		reg = __raw_readl(clk->enable_reg);
+		reg |= 1 << clk->enable_shift;
+		__raw_writel(reg, clk->enable_reg);
+	}
+}
+
+/*
+ * ref_xtal_clk
+ */
+static unsigned long ref_xtal_clk_get_rate(struct clk *clk)
+{
+	return 24000000;
+}
+
+static struct clk ref_xtal_clk = {
+	.get_rate = ref_xtal_clk_get_rate,
+};
+
+/*
+ * pll_clk
+ */
+static unsigned long pll0_clk_get_rate(struct clk *clk)
+{
+	return 480000000;
+}
+
+static unsigned long pll1_clk_get_rate(struct clk *clk)
+{
+	return 480000000;
+}
+
+static unsigned long pll2_clk_get_rate(struct clk *clk)
+{
+	return 50000000;
+}
+
+#define _CLK_ENABLE_PLL(name, r, g)					\
+static int name##_enable(struct clk *clk)				\
+{									\
+	__raw_writel(BM_CLKCTRL_##r##CTRL0_POWER,			\
+		     CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
+	udelay(10);							\
+									\
+	if (clk == &pll2_clk)						\
+		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
+	else								\
+		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
+									\
+	return 0;							\
+}
+
+_CLK_ENABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
+_CLK_ENABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
+_CLK_ENABLE_PLL(pll2_clk, PLL2, CLKGATE)
+
+#define _CLK_DISABLE_PLL(name, r, g)					\
+static void name##_disable(struct clk *clk)				\
+{									\
+	__raw_writel(BM_CLKCTRL_##r##CTRL0_POWER,			\
+		     CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
+									\
+	if (clk == &pll2_clk)						\
+		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_SET);	\
+	else								\
+		__raw_writel(BM_CLKCTRL_##r##CTRL0_##g,			\
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_##r##CTRL0_CLR);	\
+									\
+}
+
+_CLK_DISABLE_PLL(pll0_clk, PLL0, EN_USB_CLKS)
+_CLK_DISABLE_PLL(pll1_clk, PLL1, EN_USB_CLKS)
+_CLK_DISABLE_PLL(pll2_clk, PLL2, CLKGATE)
+
+#define _DEFINE_CLOCK_PLL(name)						\
+	static struct clk name = {					\
+		.get_rate	= name##_get_rate,			\
+		.enable		= name##_enable,			\
+		.disable	= name##_disable,			\
+		.parent		= &ref_xtal_clk,			\
+	}
+
+_DEFINE_CLOCK_PLL(pll0_clk);
+_DEFINE_CLOCK_PLL(pll1_clk);
+_DEFINE_CLOCK_PLL(pll2_clk);
+
+/*
+ * ref_clk
+ */
+#define _CLK_GET_RATE_REF(name, sr, ss)					\
+static unsigned long name##_get_rate(struct clk *clk)			\
+{									\
+	unsigned long parent_rate;					\
+	u32 reg, div;							\
+									\
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##sr);		\
+	div = (reg >> BP_CLKCTRL_##sr##_##ss##FRAC) & 0x3f;		\
+	parent_rate = clk_get_rate(clk->parent);			\
+									\
+	return SH_DIV((parent_rate >> PARENT_RATE_SHIFT) * 18,		\
+			div, PARENT_RATE_SHIFT);			\
+}
+
+_CLK_GET_RATE_REF(ref_cpu_clk, FRAC0, CPU)
+_CLK_GET_RATE_REF(ref_emi_clk, FRAC0, EMI)
+_CLK_GET_RATE_REF(ref_io0_clk, FRAC0, IO0)
+_CLK_GET_RATE_REF(ref_io1_clk, FRAC0, IO1)
+_CLK_GET_RATE_REF(ref_pix_clk, FRAC1, PIX)
+_CLK_GET_RATE_REF(ref_gpmi_clk, FRAC1, GPMI)
+
+#define _DEFINE_CLOCK_REF(name, er, es)					\
+	static struct clk name = {					\
+		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
+		.enable_shift	= BP_CLKCTRL_##er##_CLKGATE##es,	\
+		.get_rate	= name##_get_rate,			\
+		.enable		= _raw_clk_enable,			\
+		.disable	= _raw_clk_disable,			\
+		.parent		= &pll0_clk,				\
+	}
+
+_DEFINE_CLOCK_REF(ref_cpu_clk, FRAC0, CPU);
+_DEFINE_CLOCK_REF(ref_emi_clk, FRAC0, EMI);
+_DEFINE_CLOCK_REF(ref_io0_clk, FRAC0, IO0);
+_DEFINE_CLOCK_REF(ref_io1_clk, FRAC0, IO1);
+_DEFINE_CLOCK_REF(ref_pix_clk, FRAC1, PIX);
+_DEFINE_CLOCK_REF(ref_gpmi_clk, FRAC1, GPMI);
+
+/*
+ * General clocks
+ *
+ * clk_get_rate
+ */
+static unsigned long lradc_clk_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 16;
+}
+
+static unsigned long rtc_clk_get_rate(struct clk *clk)
+{
+	/* ref_xtal_clk is implemented as the only parent */
+	return clk_get_rate(clk->parent) / 768;
+}
+
+static unsigned long clk32k_clk_get_rate(struct clk *clk)
+{
+	return clk->parent->get_rate(clk->parent) / 750;
+}
+
+static unsigned long spdif_clk_get_rate(struct clk *clk)
+{
+	return clk_get_rate(clk->parent) / 4;
+}
+
+#define _CLK_GET_RATE(name, rs)						\
+static unsigned long name##_get_rate(struct clk *clk)			\
+{									\
+	u32 reg, div;							\
+									\
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
+									\
+	if (clk->parent == &ref_xtal_clk)				\
+		div = (reg & BM_CLKCTRL_##rs##_DIV_XTAL) >>		\
+			BP_CLKCTRL_##rs##_DIV_XTAL;			\
+	else								\
+		div = (reg & BM_CLKCTRL_##rs##_DIV_##rs) >>		\
+			BP_CLKCTRL_##rs##_DIV_##rs;			\
+									\
+	if (!div)							\
+		return -EINVAL;						\
+									\
+	return clk_get_rate(clk->parent) / div;				\
+}
+
+_CLK_GET_RATE(cpu_clk, CPU)
+_CLK_GET_RATE(emi_clk, EMI)
+
+#define _CLK_GET_RATE1(name, rs)					\
+static unsigned long name##_get_rate(struct clk *clk)			\
+{									\
+	u32 reg, div;							\
+									\
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
+	div = (reg & BM_CLKCTRL_##rs##_DIV) >> BP_CLKCTRL_##rs##_DIV;	\
+									\
+	if (!div)							\
+		return -EINVAL;						\
+									\
+	if (clk == &saif0_clk || clk == &saif1_clk)			\
+		return clk_get_rate(clk->parent) >> 16 * div;		\
+	else								\
+		return clk_get_rate(clk->parent) / div;			\
+}
+
+_CLK_GET_RATE1(hbus_clk, HBUS)
+_CLK_GET_RATE1(xbus_clk, XBUS)
+_CLK_GET_RATE1(ssp0_clk, SSP0)
+_CLK_GET_RATE1(ssp1_clk, SSP1)
+_CLK_GET_RATE1(ssp2_clk, SSP2)
+_CLK_GET_RATE1(ssp3_clk, SSP3)
+_CLK_GET_RATE1(gpmi_clk, GPMI)
+_CLK_GET_RATE1(lcdif_clk, DIS_LCDIF)
+_CLK_GET_RATE1(saif0_clk, SAIF0)
+_CLK_GET_RATE1(saif1_clk, SAIF1)
+
+#define _CLK_GET_RATE_STUB(name)					\
+static unsigned long name##_get_rate(struct clk *clk)			\
+{									\
+	return clk_get_rate(clk->parent);				\
+}
+
+_CLK_GET_RATE_STUB(uart_clk)
+_CLK_GET_RATE_STUB(pwm_clk)
+_CLK_GET_RATE_STUB(can0_clk)
+_CLK_GET_RATE_STUB(can1_clk)
+_CLK_GET_RATE_STUB(fec_clk)
+
+/*
+ * clk_set_rate
+ */
+/* fool compiler */
+#define BM_CLKCTRL_CPU_DIV	0
+#define BP_CLKCTRL_CPU_DIV	0
+#define BM_CLKCTRL_CPU_BUSY	0
+
+#define _CLK_SET_RATE(name, dr, fr, fs)					\
+static int name##_set_rate(struct clk *clk, unsigned long rate)		\
+{									\
+	u32 reg, bm_busy, div_max, d, f, div, frac;			\
+	unsigned long diff, parent_rate, calc_rate;			\
+	int i;								\
+									\
+	parent_rate = clk_get_rate(clk->parent);			\
+	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
+	bm_busy = BM_CLKCTRL_##dr##_BUSY;				\
+									\
+	if (clk->parent == &ref_xtal_clk) {				\
+		div = DIV_ROUND_UP(parent_rate, rate);			\
+		if (clk == &cpu_clk) {					\
+			div_max = BM_CLKCTRL_CPU_DIV_XTAL >>		\
+				BP_CLKCTRL_CPU_DIV_XTAL;		\
+			bm_busy = BM_CLKCTRL_CPU_BUSY_REF_XTAL;		\
+		}							\
+		if (div == 0 || div > div_max)				\
+			return -EINVAL;					\
+	} else {							\
+		rate >>= PARENT_RATE_SHIFT;				\
+		parent_rate >>= PARENT_RATE_SHIFT;			\
+		diff = parent_rate;					\
+		div = frac = 1;						\
+		if (clk == &cpu_clk) {					\
+			div_max = BM_CLKCTRL_CPU_DIV_CPU >>		\
+				BP_CLKCTRL_CPU_DIV_CPU;			\
+			bm_busy = BM_CLKCTRL_CPU_BUSY_REF_CPU;		\
+		}							\
+		for (d = 1; d <= div_max; d++) {			\
+			f = parent_rate * 18 / d / rate;		\
+			if ((parent_rate * 18 / d) % rate)		\
+				f++;					\
+			if (f < 18 || f > 35)				\
+				continue;				\
+									\
+			calc_rate = parent_rate * 18 / f / d;		\
+			if (calc_rate > rate)				\
+				continue;				\
+									\
+			if (rate - calc_rate < diff) {			\
+				frac = f;				\
+				div = d;				\
+				diff = rate - calc_rate;		\
+			}						\
+									\
+			if (diff == 0)					\
+				break;					\
+		}							\
+									\
+		if (diff == parent_rate)				\
+			return -EINVAL;					\
+									\
+		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr);	\
+		reg &= ~BM_CLKCTRL_##fr##_##fs##FRAC;			\
+		reg |= frac;						\
+		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##fr);	\
+	}								\
+									\
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
+	if (clk == &cpu_clk) {						\
+		reg &= ~BM_CLKCTRL_CPU_DIV_CPU;				\
+		reg |= div << BP_CLKCTRL_CPU_DIV_CPU;			\
+	} else {							\
+		reg &= ~BM_CLKCTRL_##dr##_DIV;				\
+		reg |= div << BP_CLKCTRL_##dr##_DIV;			\
+		if (reg | (1 << clk->enable_shift)) {			\
+			pr_err("%s: clock is gated\n", __func__);	\
+			return -EINVAL;					\
+		}							\
+	}								\
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU);		\
+									\
+	for (i = 10000; i; i--)						\
+		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
+			HW_CLKCTRL_##dr) & bm_busy))			\
+			break;						\
+	if (!i)	{							\
+		pr_err("%s: divider writing timeout\n", __func__);	\
+		return -ETIMEDOUT;					\
+	}								\
+									\
+	return 0;							\
+}
+
+_CLK_SET_RATE(cpu_clk, CPU, FRAC0, CPU)
+_CLK_SET_RATE(ssp0_clk, SSP0, FRAC0, IO0)
+_CLK_SET_RATE(ssp1_clk, SSP1, FRAC0, IO0)
+_CLK_SET_RATE(ssp2_clk, SSP2, FRAC0, IO1)
+_CLK_SET_RATE(ssp3_clk, SSP3, FRAC0, IO1)
+_CLK_SET_RATE(lcdif_clk, DIS_LCDIF, FRAC1, PIX)
+_CLK_SET_RATE(gpmi_clk, GPMI, FRAC1, GPMI)
+
+#define _CLK_SET_RATE1(name, dr)					\
+static int name##_set_rate(struct clk *clk, unsigned long rate)		\
+{									\
+	u32 reg, div_max, div;						\
+	unsigned long parent_rate;					\
+	int i;								\
+									\
+	parent_rate = clk_get_rate(clk->parent);			\
+	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
+									\
+	div = DIV_ROUND_UP(parent_rate, rate);				\
+	if (div == 0 || div > div_max)					\
+		return -EINVAL;						\
+									\
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
+	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
+	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
+	if (reg | (1 << clk->enable_shift)) {				\
+		pr_err("%s: clock is gated\n", __func__);		\
+		return -EINVAL;						\
+	}								\
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
+									\
+	for (i = 10000; i; i--)						\
+		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
+			HW_CLKCTRL_##dr) & BM_CLKCTRL_##dr##_BUSY))	\
+			break;						\
+	if (!i)	{							\
+		pr_err("%s: divider writing timeout\n", __func__);	\
+		return -ETIMEDOUT;					\
+	}								\
+									\
+	return 0;							\
+}
+
+_CLK_SET_RATE1(xbus_clk, XBUS)
+
+/* saif clock uses 16 bits frac div */
+#define _CLK_SET_RATE_SAIF(name, rs)					\
+static int name##_set_rate(struct clk *clk, unsigned long rate)		\
+{									\
+	u16 div;							\
+	u32 reg;							\
+	u64 lrate;							\
+	unsigned long parent_rate;					\
+	int i;								\
+									\
+	parent_rate = clk_get_rate(clk->parent);			\
+	if (rate > parent_rate)						\
+		return -EINVAL;						\
+									\
+	lrate = (u64)rate << 16;					\
+	do_div(lrate, parent_rate);					\
+	div = (u16)lrate;						\
+									\
+	if (!div)							\
+		return -EINVAL;						\
+									\
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
+	reg &= ~BM_CLKCTRL_##rs##_DIV;					\
+	reg |= div << BP_CLKCTRL_##rs##_DIV;				\
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs);		\
+									\
+	for (i = 10000; i; i--)						\
+		if (!(__raw_readl(CLKCTRL_BASE_ADDR +			\
+			HW_CLKCTRL_##rs) & BM_CLKCTRL_##rs##_BUSY))	\
+			break;						\
+	if (!i) {							\
+		pr_err("%s: divider writing timeout\n", __func__);	\
+		return -ETIMEDOUT;					\
+	}								\
+									\
+	return 0;							\
+}
+
+_CLK_SET_RATE_SAIF(saif0_clk, SAIF0)
+_CLK_SET_RATE_SAIF(saif1_clk, SAIF1)
+
+#define _CLK_SET_RATE_STUB(name)					\
+static int name##_set_rate(struct clk *clk, unsigned long rate)		\
+{									\
+	return -EINVAL;							\
+}
+
+_CLK_SET_RATE_STUB(emi_clk)
+_CLK_SET_RATE_STUB(uart_clk)
+_CLK_SET_RATE_STUB(pwm_clk)
+_CLK_SET_RATE_STUB(spdif_clk)
+_CLK_SET_RATE_STUB(clk32k_clk)
+_CLK_SET_RATE_STUB(can0_clk)
+_CLK_SET_RATE_STUB(can1_clk)
+_CLK_SET_RATE_STUB(fec_clk)
+
+/*
+ * clk_set_parent
+ */
+#define _CLK_SET_PARENT(name, bit)					\
+static int name##_set_parent(struct clk *clk, struct clk *parent)	\
+{									\
+	if (parent != clk->parent) {					\
+		__raw_writel(BM_CLKCTRL_CLKSEQ_BYPASS_##bit,		\
+			 HW_CLKCTRL_CLKSEQ_TOG);			\
+		clk->parent = parent;					\
+	}								\
+									\
+	return 0;							\
+}
+
+_CLK_SET_PARENT(cpu_clk, CPU)
+_CLK_SET_PARENT(emi_clk, EMI)
+_CLK_SET_PARENT(ssp0_clk, SSP0)
+_CLK_SET_PARENT(ssp1_clk, SSP1)
+_CLK_SET_PARENT(ssp2_clk, SSP2)
+_CLK_SET_PARENT(ssp3_clk, SSP3)
+_CLK_SET_PARENT(lcdif_clk, DIS_LCDIF)
+_CLK_SET_PARENT(gpmi_clk, GPMI)
+_CLK_SET_PARENT(saif0_clk, SAIF0)
+_CLK_SET_PARENT(saif1_clk, SAIF1)
+
+#define _CLK_SET_PARENT_STUB(name)					\
+static int name##_set_parent(struct clk *clk, struct clk *parent)	\
+{									\
+	if (parent != clk->parent)					\
+		return -EINVAL;						\
+	else								\
+		return 0;						\
+}
+
+_CLK_SET_PARENT_STUB(pwm_clk)
+_CLK_SET_PARENT_STUB(uart_clk)
+_CLK_SET_PARENT_STUB(clk32k_clk)
+_CLK_SET_PARENT_STUB(spdif_clk)
+_CLK_SET_PARENT_STUB(fec_clk)
+_CLK_SET_PARENT_STUB(can0_clk)
+_CLK_SET_PARENT_STUB(can1_clk)
+
+/*
+ * clk definition
+ */
+static struct clk cpu_clk = {
+	.get_rate = cpu_clk_get_rate,
+	.set_rate = cpu_clk_set_rate,
+	.set_parent = cpu_clk_set_parent,
+	.parent = &ref_cpu_clk,
+};
+
+static struct clk hbus_clk = {
+	.get_rate = hbus_clk_get_rate,
+	.parent = &cpu_clk,
+};
+
+static struct clk xbus_clk = {
+	.get_rate = xbus_clk_get_rate,
+	.set_rate = xbus_clk_set_rate,
+	.parent = &ref_xtal_clk,
+};
+
+static struct clk lradc_clk = {
+	.get_rate = lradc_clk_get_rate,
+	.parent = &clk32k_clk,
+};
+
+static struct clk rtc_clk = {
+	.get_rate = rtc_clk_get_rate,
+	.parent = &ref_xtal_clk,
+};
+
+/* usb_clk gate is controlled in DIGCTRL other than CLKCTRL */
+static struct clk usb0_clk = {
+	.enable_reg = DIGCTRL_BASE_ADDR,
+	.enable_shift = 2,
+	.enable = _raw_clk_enable,
+	.disable = _raw_clk_disable,
+	.parent = &pll0_clk,
+};
+
+static struct clk usb1_clk = {
+	.enable_reg = DIGCTRL_BASE_ADDR,
+	.enable_shift = 16,
+	.enable = _raw_clk_enable,
+	.disable = _raw_clk_disable,
+	.parent = &pll1_clk,
+};
+
+#define _DEFINE_CLOCK(name, er, es, p)					\
+	static struct clk name = {					\
+		.enable_reg	= CLKCTRL_BASE_ADDR + HW_CLKCTRL_##er,	\
+		.enable_shift	= BP_CLKCTRL_##er##_##es,		\
+		.get_rate	= name##_get_rate,			\
+		.set_rate	= name##_set_rate,			\
+		.set_parent	= name##_set_parent,			\
+		.enable		= _raw_clk_enable,			\
+		.disable	= _raw_clk_disable,			\
+		.parent		= p,					\
+	}
+
+_DEFINE_CLOCK(emi_clk, EMI, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(ssp0_clk, SSP0, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(ssp1_clk, SSP1, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(ssp2_clk, SSP2, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(ssp3_clk, SSP3, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(lcdif_clk, DIS_LCDIF, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(gpmi_clk, GPMI, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(saif0_clk, SAIF0, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(saif1_clk, SAIF1, CLKGATE, &ref_xtal_clk);
+_DEFINE_CLOCK(can0_clk, FLEXCAN, STOP_CAN0, &ref_xtal_clk);
+_DEFINE_CLOCK(can1_clk, FLEXCAN, STOP_CAN1, &ref_xtal_clk);
+_DEFINE_CLOCK(pwm_clk, XTAL, PWM_CLK24M_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(uart_clk, XTAL, UART_CLK_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(clk32k_clk, XTAL, TIMROT_CLK32K_GATE, &ref_xtal_clk);
+_DEFINE_CLOCK(spdif_clk, SPDIF, CLKGATE, &pll0_clk);
+_DEFINE_CLOCK(fec_clk, ENET, DISABLE, &hbus_clk);
+
+#define _REGISTER_CLOCK(d, n, c) \
+	{ \
+		.dev_id = d, \
+		.con_id = n, \
+		.clk = &c, \
+	},
+
+static struct clk_lookup lookups[] = {
+	_REGISTER_CLOCK("mxs-duart.0", NULL, uart_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
+	_REGISTER_CLOCK("rtc", NULL, rtc_clk)
+	_REGISTER_CLOCK("pll2", NULL, pll2_clk)
+	_REGISTER_CLOCK(NULL, "hclk", hbus_clk)
+	_REGISTER_CLOCK(NULL, "xclk", xbus_clk)
+	_REGISTER_CLOCK(NULL, "can0", can0_clk)
+	_REGISTER_CLOCK(NULL, "can1", can1_clk)
+	_REGISTER_CLOCK(NULL, "usb0", usb0_clk)
+	_REGISTER_CLOCK(NULL, "usb1", usb1_clk)
+	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
+	_REGISTER_CLOCK(NULL, "lradc", lradc_clk)
+	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
+};
+
+static int clk_misc_init(void)
+{
+	u32 reg;
+	int i;
+
+	/* Fix up parent per register setting */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_CLKSEQ);
+	cpu_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_CPU) ?
+			&ref_xtal_clk : &ref_cpu_clk;
+	emi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_EMI) ?
+			&ref_xtal_clk : &ref_emi_clk;
+	ssp0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP0) ?
+			&ref_xtal_clk : &ref_io0_clk;
+	ssp1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP1) ?
+			&ref_xtal_clk : &ref_io0_clk;
+	ssp2_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP2) ?
+			&ref_xtal_clk : &ref_io1_clk;
+	ssp3_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SSP3) ?
+			&ref_xtal_clk : &ref_io1_clk;
+	lcdif_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF) ?
+			&ref_xtal_clk : &ref_pix_clk;
+	gpmi_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_GPMI) ?
+			&ref_xtal_clk : &ref_gpmi_clk;
+	saif0_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0) ?
+			&ref_xtal_clk : &pll0_clk;
+	saif1_clk.parent = (reg & BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1) ?
+			&ref_xtal_clk : &pll0_clk;
+
+	/* Use int div over frac when both are available */
+	__raw_writel(BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN,
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
+	__raw_writel(BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN,
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_CLR);
+	__raw_writel(BM_CLKCTRL_HBUS_DIV_FRAC_EN,
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS_CLR);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
+	reg &= ~BM_CLKCTRL_XBUS_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_XBUS);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
+	reg &= ~BM_CLKCTRL_SSP0_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP0);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
+	reg &= ~BM_CLKCTRL_SSP1_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP1);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
+	reg &= ~BM_CLKCTRL_SSP2_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP2);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
+	reg &= ~BM_CLKCTRL_SSP3_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SSP3);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
+	reg &= ~BM_CLKCTRL_GPMI_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_GPMI);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
+	reg &= ~BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_DIS_LCDIF);
+
+	/* SAIF has to use frac div for functional operation */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
+	reg &= ~BM_CLKCTRL_SAIF0_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF0);
+
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
+	reg &= ~BM_CLKCTRL_SAIF1_DIV_FRAC_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_SAIF1);
+
+	/*
+	 * Set safe hbus clock divider. A divider of 3 ensure that
+	 * the Vddd voltage required for the cpu clock is sufficiently
+	 * high for the hbus clock.
+	 */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
+	reg &= BM_CLKCTRL_HBUS_DIV;
+	reg |= 3 << BP_CLKCTRL_HBUS_DIV;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_HBUS);
+
+	for (i = 10000; i; i--)
+		if (!(__raw_readl(CLKCTRL_BASE_ADDR +
+			HW_CLKCTRL_HBUS) & BM_CLKCTRL_HBUS_ASM_BUSY))
+			break;
+	if (!i) {
+		pr_err("%s: divider writing timeout\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	/* Gate off cpu clock in WFI for power saving */
+	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
+			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
+
+	/* Extra fec clock setting */
+	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+	reg &= ~BM_CLKCTRL_ENET_SLEEP;
+	reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
+	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+
+	return 0;
+}
+
+int __init mx28_clocks_init(void)
+{
+	clk_misc_init();
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0);
+
+	return 0;
+}
diff --git a/arch/arm/mach-mxs/clock.c b/arch/arm/mach-mxs/clock.c
new file mode 100644
index 00000000000..e7d2269cf70
--- /dev/null
+++ b/arch/arm/mach-mxs/clock.c
@@ -0,0 +1,200 @@
+/*
+ * Based on arch/arm/plat-omap/clock.c
+ *
+ * Copyright (C) 2004 - 2005 Nokia corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Modified for omap shared clock framework by Tony Lindgren <tony@atomide.com>
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+/* #define DEBUG */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/proc_fs.h>
+#include <linux/semaphore.h>
+#include <linux/string.h>
+
+#include <mach/clock.h>
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+/*-------------------------------------------------------------------------
+ * Standard clock functions defined in include/linux/clk.h
+ *-------------------------------------------------------------------------*/
+
+static void __clk_disable(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return;
+	WARN_ON(!clk->usecount);
+
+	if (!(--clk->usecount)) {
+		if (clk->disable)
+			clk->disable(clk);
+		__clk_disable(clk->parent);
+		__clk_disable(clk->secondary);
+	}
+}
+
+static int __clk_enable(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	if (clk->usecount++ == 0) {
+		__clk_enable(clk->parent);
+		__clk_enable(clk->secondary);
+
+		if (clk->enable)
+			clk->enable(clk);
+	}
+	return 0;
+}
+
+/* This function increments the reference count on the clock and enables the
+ * clock if not already enabled. The parent clock tree is recursively enabled
+ */
+int clk_enable(struct clk *clk)
+{
+	int ret = 0;
+
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+	ret = __clk_enable(clk);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+/* This function decrements the reference count on the clock and disables
+ * the clock when reference count is 0. The parent clock tree is
+ * recursively disabled
+ */
+void clk_disable(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return;
+
+	mutex_lock(&clocks_mutex);
+	__clk_disable(clk);
+	mutex_unlock(&clocks_mutex);
+}
+EXPORT_SYMBOL(clk_disable);
+
+/* Retrieve the *current* clock rate. If the clock itself
+ * does not provide a special calculation routine, ask
+ * its parent and so on, until one is able to return
+ * a valid clock rate
+ */
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (clk == NULL || IS_ERR(clk))
+		return 0UL;
+
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
+	return clk_get_rate(clk->parent);
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+/* Round the requested clock rate to the nearest supported
+ * rate that is less than or equal to the requested rate.
+ * This is dependent on the clock's current parent.
+ */
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	if (clk == NULL || IS_ERR(clk) || !clk->round_rate)
+		return 0;
+
+	return clk->round_rate(clk, rate);
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+/* Set the clock to the requested clock rate. The rate must
+ * match a supported rate exactly based on what clk_round_rate returns
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	int ret = -EINVAL;
+
+	if (clk == NULL || IS_ERR(clk) || clk->set_rate == NULL || rate == 0)
+		return ret;
+
+	mutex_lock(&clocks_mutex);
+	ret = clk->set_rate(clk, rate);
+	mutex_unlock(&clocks_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/* Set the clock's parent to another clock source */
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	int ret = -EINVAL;
+	struct clk *old;
+
+	if (clk == NULL || IS_ERR(clk) || parent == NULL ||
+	    IS_ERR(parent) || clk->set_parent == NULL)
+		return ret;
+
+	if (clk->usecount)
+		clk_enable(parent);
+
+	mutex_lock(&clocks_mutex);
+	ret = clk->set_parent(clk, parent);
+	if (ret == 0) {
+		old = clk->parent;
+		clk->parent = parent;
+	} else {
+		old = parent;
+	}
+	mutex_unlock(&clocks_mutex);
+
+	if (clk->usecount)
+		clk_disable(old);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
+/* Retrieve the clock's parent clock source */
+struct clk *clk_get_parent(struct clk *clk)
+{
+	struct clk *ret = NULL;
+
+	if (clk == NULL || IS_ERR(clk))
+		return ret;
+
+	return clk->parent;
+}
+EXPORT_SYMBOL(clk_get_parent);
diff --git a/arch/arm/mach-mxs/devices-mx23.h b/arch/arm/mach-mxs/devices-mx23.h
new file mode 100644
index 00000000000..d0f49fc0abb
--- /dev/null
+++ b/arch/arm/mach-mxs/devices-mx23.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx23.h>
+#include <mach/devices-common.h>
+
+extern const struct mxs_duart_data mx23_duart_data __initconst;
+#define mx23_add_duart() \
+	mxs_add_duart(&mx23_duart_data)
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
new file mode 100644
index 00000000000..00b736c434b
--- /dev/null
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+extern const struct mxs_duart_data mx28_duart_data __initconst;
+#define mx28_add_duart() \
+	mxs_add_duart(&mx28_duart_data)
+
+extern const struct mxs_fec_data mx28_fec_data[] __initconst;
+#define mx28_add_fec(id, pdata) \
+	mxs_add_fec(&mx28_fec_data[id], pdata)
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
new file mode 100644
index 00000000000..6b60f02ca2e
--- /dev/null
+++ b/arch/arm/mach-mxs/devices.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <mach/common.h>
+
+struct platform_device *__init mxs_add_platform_device_dmamask(
+		const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data, u64 dmamask)
+{
+	int ret = -ENOMEM;
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc(name, id);
+	if (!pdev)
+		goto err;
+
+	if (dmamask) {
+		/*
+		 * This memory isn't freed when the device is put,
+		 * I don't have a nice idea for that though.  Conceptually
+		 * dma_mask in struct device should not be a pointer.
+		 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
+		 */
+		pdev->dev.dma_mask =
+			kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
+		if (!pdev->dev.dma_mask)
+			/* ret is still -ENOMEM; */
+			goto err;
+
+		*pdev->dev.dma_mask = dmamask;
+		pdev->dev.coherent_dma_mask = dmamask;
+	}
+
+	if (res) {
+		ret = platform_device_add_resources(pdev, res, num_resources);
+		if (ret)
+			goto err;
+	}
+
+	if (data) {
+		ret = platform_device_add_data(pdev, data, size_data);
+		if (ret)
+			goto err;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+err:
+		platform_device_put(pdev);
+		return ERR_PTR(ret);
+	}
+
+	return pdev;
+}
diff --git a/arch/arm/mach-mxs/devices/Kconfig b/arch/arm/mach-mxs/devices/Kconfig
new file mode 100644
index 00000000000..a35a2dc5539
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/Kconfig
@@ -0,0 +1,5 @@
+config MXS_HAVE_PLATFORM_DUART
+	bool
+
+config MXS_HAVE_PLATFORM_FEC
+	bool
diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile
new file mode 100644
index 00000000000..4b5266a3e6d
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_MXS_HAVE_PLATFORM_DUART) += platform-duart.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_FEC) += platform-fec.o
diff --git a/arch/arm/mach-mxs/devices/platform-duart.c b/arch/arm/mach-mxs/devices/platform-duart.c
new file mode 100644
index 00000000000..2fe0df5b0aa
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-duart.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_duart_data_entry(soc)					\
+	{								\
+		.iobase = soc ## _DUART_BASE_ADDR,			\
+		.irq = soc ## _INT_DUART,				\
+	}
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_duart_data mx23_duart_data __initconst =
+	mxs_duart_data_entry(MX23);
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_duart_data mx28_duart_data __initconst =
+	mxs_duart_data_entry(MX28);
+#endif
+
+struct platform_device *__init mxs_add_duart(
+		const struct mxs_duart_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("mxs-duart", 0, res, ARRAY_SIZE(res),
+					NULL, 0);
+}
diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c
new file mode 100644
index 00000000000..c08168cf3de
--- /dev/null
+++ b/arch/arm/mach-mxs/devices/platform-fec.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_fec_data_entry_single(soc, _id)				\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _ENET_MAC ## _id ## _BASE_ADDR,	\
+		.irq = soc ## _INT_ENET_MAC ## _id,			\
+	}
+
+#define mxs_fec_data_entry(soc, _id)					\
+	[_id] = mxs_fec_data_entry_single(soc, _id)
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_fec_data mx28_fec_data[] __initconst = {
+#define mx28_fec_data_entry(_id)					\
+	mxs_fec_data_entry(MX28, _id)
+	mx28_fec_data_entry(0),
+	mx28_fec_data_entry(1),
+};
+#endif
+
+struct platform_device *__init mxs_add_fec(
+		const struct mxs_fec_data *data,
+		const struct fec_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return mxs_add_platform_device("fec", data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c
new file mode 100644
index 00000000000..d7ad7a61366
--- /dev/null
+++ b/arch/arm/mach-mxs/gpio.c
@@ -0,0 +1,325 @@
+/*
+ * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * Based on code from Freescale,
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <asm-generic/bug.h>
+
+#include "gpio.h"
+
+static struct mxs_gpio_port *mxs_gpio_ports;
+static int gpio_table_size;
+
+#define PINCTRL_DOUT(n)		((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10)
+#define PINCTRL_DIN(n)		((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10)
+#define PINCTRL_DOE(n)		((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10)
+#define PINCTRL_PIN2IRQ(n)	((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10)
+#define PINCTRL_IRQEN(n)	((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10)
+#define PINCTRL_IRQLEV(n)	((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10)
+#define PINCTRL_IRQPOL(n)	((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10)
+#define PINCTRL_IRQSTAT(n)	((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10)
+
+#define GPIO_INT_FALL_EDGE	0x0
+#define GPIO_INT_LOW_LEV	0x1
+#define GPIO_INT_RISE_EDGE	0x2
+#define GPIO_INT_HIGH_LEV	0x3
+#define GPIO_INT_LEV_MASK	(1 << 0)
+#define GPIO_INT_POL_MASK	(1 << 1)
+
+/* Note: This driver assumes 32 GPIOs are handled in one register */
+
+static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index)
+{
+	__mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id));
+}
+
+static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index,
+				int enable)
+{
+	if (enable) {
+		__mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id));
+		__mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id));
+	} else {
+		__mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id));
+	}
+}
+
+static void mxs_gpio_ack_irq(u32 irq)
+{
+	u32 gpio = irq_to_gpio(irq);
+	clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
+}
+
+static void mxs_gpio_mask_irq(u32 irq)
+{
+	u32 gpio = irq_to_gpio(irq);
+	set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
+}
+
+static void mxs_gpio_unmask_irq(u32 irq)
+{
+	u32 gpio = irq_to_gpio(irq);
+	set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
+}
+
+static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
+
+static int mxs_gpio_set_irq_type(u32 irq, u32 type)
+{
+	u32 gpio = irq_to_gpio(irq);
+	u32 pin_mask = 1 << (gpio & 31);
+	struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
+	void __iomem *pin_addr;
+	int edge;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		edge = GPIO_INT_RISE_EDGE;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		edge = GPIO_INT_FALL_EDGE;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		edge = GPIO_INT_LOW_LEV;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		edge = GPIO_INT_HIGH_LEV;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* set level or edge */
+	pin_addr = port->base + PINCTRL_IRQLEV(port->id);
+	if (edge & GPIO_INT_LEV_MASK)
+		__mxs_setl(pin_mask, pin_addr);
+	else
+		__mxs_clrl(pin_mask, pin_addr);
+
+	/* set polarity */
+	pin_addr = port->base + PINCTRL_IRQPOL(port->id);
+	if (edge & GPIO_INT_POL_MASK)
+		__mxs_setl(pin_mask, pin_addr);
+	else
+		__mxs_clrl(pin_mask, pin_addr);
+
+	clear_gpio_irqstatus(port, gpio & 0x1f);
+
+	return 0;
+}
+
+/* MXS has one interrupt *per* gpio port */
+static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
+{
+	u32 irq_stat;
+	struct mxs_gpio_port *port = (struct mxs_gpio_port *)get_irq_data(irq);
+	u32 gpio_irq_no_base = port->virtual_irq_start;
+
+	irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
+			__raw_readl(port->base + PINCTRL_IRQEN(port->id));
+
+	while (irq_stat != 0) {
+		int irqoffset = fls(irq_stat) - 1;
+		generic_handle_irq(gpio_irq_no_base + irqoffset);
+		irq_stat &= ~(1 << irqoffset);
+	}
+}
+
+/*
+ * Set interrupt number "irq" in the GPIO as a wake-up source.
+ * While system is running, all registered GPIO interrupts need to have
+ * wake-up enabled. When system is suspended, only selected GPIO interrupts
+ * need to have wake-up enabled.
+ * @param  irq          interrupt source number
+ * @param  enable       enable as wake-up if equal to non-zero
+ * @return       This function returns 0 on success.
+ */
+static int mxs_gpio_set_wake_irq(u32 irq, u32 enable)
+{
+	u32 gpio = irq_to_gpio(irq);
+	u32 gpio_idx = gpio & 0x1f;
+	struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
+
+	if (enable) {
+		if (port->irq_high && (gpio_idx >= 16))
+			enable_irq_wake(port->irq_high);
+		else
+			enable_irq_wake(port->irq);
+	} else {
+		if (port->irq_high && (gpio_idx >= 16))
+			disable_irq_wake(port->irq_high);
+		else
+			disable_irq_wake(port->irq);
+	}
+
+	return 0;
+}
+
+static struct irq_chip gpio_irq_chip = {
+	.ack = mxs_gpio_ack_irq,
+	.mask = mxs_gpio_mask_irq,
+	.unmask = mxs_gpio_unmask_irq,
+	.set_type = mxs_gpio_set_irq_type,
+	.set_wake = mxs_gpio_set_wake_irq,
+};
+
+static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
+				int dir)
+{
+	struct mxs_gpio_port *port =
+		container_of(chip, struct mxs_gpio_port, chip);
+	void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id);
+
+	if (dir)
+		__mxs_setl(1 << offset, pin_addr);
+	else
+		__mxs_clrl(1 << offset, pin_addr);
+}
+
+static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct mxs_gpio_port *port =
+		container_of(chip, struct mxs_gpio_port, chip);
+
+	return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1;
+}
+
+static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct mxs_gpio_port *port =
+		container_of(chip, struct mxs_gpio_port, chip);
+	void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id);
+
+	if (value)
+		__mxs_setl(1 << offset, pin_addr);
+	else
+		__mxs_clrl(1 << offset, pin_addr);
+}
+
+static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct mxs_gpio_port *port =
+		container_of(chip, struct mxs_gpio_port, chip);
+
+	return port->virtual_irq_start + offset;
+}
+
+static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	mxs_set_gpio_direction(chip, offset, 0);
+	return 0;
+}
+
+static int mxs_gpio_direction_output(struct gpio_chip *chip,
+				     unsigned offset, int value)
+{
+	mxs_gpio_set(chip, offset, value);
+	mxs_set_gpio_direction(chip, offset, 1);
+	return 0;
+}
+
+int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt)
+{
+	int i, j;
+
+	/* save for local usage */
+	mxs_gpio_ports = port;
+	gpio_table_size = cnt;
+
+	pr_info("MXS GPIO hardware\n");
+
+	for (i = 0; i < cnt; i++) {
+		/* disable the interrupt and clear the status */
+		__raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i));
+		__raw_writel(0, port[i].base + PINCTRL_IRQEN(i));
+
+		/* clear address has to be used to clear IRQSTAT bits */
+		__mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i));
+
+		for (j = port[i].virtual_irq_start;
+			j < port[i].virtual_irq_start + 32; j++) {
+			set_irq_chip(j, &gpio_irq_chip);
+			set_irq_handler(j, handle_level_irq);
+			set_irq_flags(j, IRQF_VALID);
+		}
+
+		/* setup one handler for each entry */
+		set_irq_chained_handler(port[i].irq, mxs_gpio_irq_handler);
+		set_irq_data(port[i].irq, &port[i]);
+
+		/* register gpio chip */
+		port[i].chip.direction_input = mxs_gpio_direction_input;
+		port[i].chip.direction_output = mxs_gpio_direction_output;
+		port[i].chip.get = mxs_gpio_get;
+		port[i].chip.set = mxs_gpio_set;
+		port[i].chip.to_irq = mxs_gpio_to_irq;
+		port[i].chip.base = i * 32;
+		port[i].chip.ngpio = 32;
+
+		/* its a serious configuration bug when it fails */
+		BUG_ON(gpiochip_add(&port[i].chip) < 0);
+	}
+
+	return 0;
+}
+
+#define DEFINE_MXS_GPIO_PORT(soc, _id)					\
+	{								\
+		.chip.label = "gpio-" #_id,				\
+		.id = _id,						\
+		.irq = soc ## _INT_GPIO ## _id,				\
+		.base = soc ## _IO_ADDRESS(				\
+				soc ## _PINCTRL ## _BASE_ADDR),		\
+		.virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32,	\
+	}
+
+#define DEFINE_REGISTER_FUNCTION(prefix)				\
+int __init prefix ## _register_gpios(void)				\
+{									\
+	return mxs_gpio_init(prefix ## _gpio_ports,			\
+			ARRAY_SIZE(prefix ## _gpio_ports));		\
+}
+
+#ifdef CONFIG_SOC_IMX23
+static struct mxs_gpio_port mx23_gpio_ports[] = {
+	DEFINE_MXS_GPIO_PORT(MX23, 0),
+	DEFINE_MXS_GPIO_PORT(MX23, 1),
+	DEFINE_MXS_GPIO_PORT(MX23, 2),
+};
+DEFINE_REGISTER_FUNCTION(mx23)
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+static struct mxs_gpio_port mx28_gpio_ports[] = {
+	DEFINE_MXS_GPIO_PORT(MX28, 0),
+	DEFINE_MXS_GPIO_PORT(MX28, 1),
+	DEFINE_MXS_GPIO_PORT(MX28, 2),
+	DEFINE_MXS_GPIO_PORT(MX28, 3),
+	DEFINE_MXS_GPIO_PORT(MX28, 4),
+};
+DEFINE_REGISTER_FUNCTION(mx28)
+#endif
diff --git a/arch/arm/mach-mxs/gpio.h b/arch/arm/mach-mxs/gpio.h
new file mode 100644
index 00000000000..005bb06630b
--- /dev/null
+++ b/arch/arm/mach-mxs/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __MXS_GPIO_H__
+#define __MXS_GPIO_H__
+
+struct mxs_gpio_port {
+	void __iomem *base;
+	int id;
+	int irq;
+	int irq_high;
+	int virtual_irq_start;
+	struct gpio_chip chip;
+};
+
+int mxs_gpio_init(struct mxs_gpio_port*, int);
+
+#endif /* __MXS_GPIO_H__ */
diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c
new file mode 100644
index 00000000000..5dd43ba7005
--- /dev/null
+++ b/arch/arm/mach-mxs/icoll.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/mxs.h>
+#include <mach/common.h>
+
+#define HW_ICOLL_VECTOR				0x0000
+#define HW_ICOLL_LEVELACK			0x0010
+#define HW_ICOLL_CTRL				0x0020
+#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
+#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
+#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
+
+static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
+
+static void icoll_ack_irq(unsigned int irq)
+{
+	/*
+	 * The Interrupt Collector is able to prioritize irqs.
+	 * Currently only level 0 is used. So acking can use
+	 * BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
+	 */
+	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
+			icoll_base + HW_ICOLL_LEVELACK);
+}
+
+static void icoll_mask_irq(unsigned int irq)
+{
+	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
+			icoll_base + HW_ICOLL_INTERRUPTn_CLR(irq));
+}
+
+static void icoll_unmask_irq(unsigned int irq)
+{
+	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
+			icoll_base + HW_ICOLL_INTERRUPTn_SET(irq));
+}
+
+static struct irq_chip mxs_icoll_chip = {
+	.ack = icoll_ack_irq,
+	.mask = icoll_mask_irq,
+	.unmask = icoll_unmask_irq,
+};
+
+void __init icoll_init_irq(void)
+{
+	int i;
+
+	/*
+	 * Interrupt Collector reset, which initializes the priority
+	 * for each irq to level 0.
+	 */
+	mxs_reset_block(icoll_base + HW_ICOLL_CTRL);
+
+	for (i = 0; i < MXS_INTERNAL_IRQS; i++) {
+		set_irq_chip(i, &mxs_icoll_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-mxs/include/mach/clkdev.h b/arch/arm/mach-mxs/include/mach/clkdev.h
new file mode 100644
index 00000000000..3a8f2e3a630
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_MXS_CLKDEV_H__
+#define __MACH_MXS_CLKDEV_H__
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-mxs/include/mach/clock.h b/arch/arm/mach-mxs/include/mach/clock.h
new file mode 100644
index 00000000000..041e276d8a3
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/clock.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __MACH_MXS_CLOCK_H__
+#define __MACH_MXS_CLOCK_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/list.h>
+
+struct module;
+
+struct clk {
+	int id;
+	/* Source clock this clk depends on */
+	struct clk *parent;
+	/* Secondary clock to enable/disable with this clock */
+	struct clk *secondary;
+	/* Reference count of clock enable/disable */
+	__s8 usecount;
+	/* Register bit position for clock's enable/disable control. */
+	u8 enable_shift;
+	/* Register address for clock's enable/disable control. */
+	void __iomem *enable_reg;
+	u32 flags;
+	/* get the current clock rate (always a fresh value) */
+	unsigned long (*get_rate) (struct clk *);
+	/* Function ptr to set the clock to a new rate. The rate must match a
+	   supported rate returned from round_rate. Leave blank if clock is not
+	   programmable */
+	int (*set_rate) (struct clk *, unsigned long);
+	/* Function ptr to round the requested clock rate to the nearest
+	   supported rate that is less than or equal to the requested rate. */
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	/* Function ptr to enable the clock. Leave blank if clock can not
+	   be gated. */
+	int (*enable) (struct clk *);
+	/* Function ptr to disable the clock. Leave blank if clock can not
+	   be gated. */
+	void (*disable) (struct clk *);
+	/* Function ptr to set the parent clock of the clock. */
+	int (*set_parent) (struct clk *, struct clk *);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __MACH_MXS_CLOCK_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
new file mode 100644
index 00000000000..59133eb3cc9
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MXS_COMMON_H__
+#define __MACH_MXS_COMMON_H__
+
+struct clk;
+
+extern int mxs_reset_block(void __iomem *);
+extern void mxs_timer_init(struct clk *, int);
+
+extern int mx23_register_gpios(void);
+extern int mx23_clocks_init(void);
+extern void mx23_map_io(void);
+extern void mx23_init_irq(void);
+
+extern int mx28_register_gpios(void);
+extern int mx28_clocks_init(void);
+extern void mx28_map_io(void);
+extern void mx28_init_irq(void);
+
+extern void icoll_init_irq(void);
+
+#endif /* __MACH_MXS_COMMON_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
new file mode 100644
index 00000000000..79650a1ad78
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-mxs/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+
+#ifdef CONFIG_SOC_IMX23
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#define UART_PADDR	MX23_DUART_BASE_ADDR
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+#ifdef UART_PADDR
+#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
+#endif
+#define UART_PADDR	MX28_DUART_BASE_ADDR
+#endif
+
+#define UART_VADDR	MXS_IO_ADDRESS(UART_PADDR)
+
+		.macro	addruart, rp, rv
+		ldr	\rp, =UART_PADDR	@ physical
+		ldr	\rv, =UART_VADDR	@ virtual
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
new file mode 100644
index 00000000000..3da48d4d327
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+
+struct platform_device *mxs_add_platform_device_dmamask(
+		const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data, u64 dmamask);
+
+static inline struct platform_device *mxs_add_platform_device(
+		const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data)
+{
+	return mxs_add_platform_device_dmamask(
+			name, id, res, num_resources, data, size_data, 0);
+}
+
+/* duart */
+struct mxs_duart_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init mxs_add_duart(
+		const struct mxs_duart_data *data);
+
+/* fec */
+#include <linux/fec.h>
+struct mxs_fec_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init mxs_add_fec(
+		const struct mxs_fec_data *data,
+		const struct fec_platform_data *pdata);
diff --git a/arch/arm/mach-mxs/include/mach/entry-macro.S b/arch/arm/mach-mxs/include/mach/entry-macro.S
new file mode 100644
index 00000000000..9f0da12e657
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * Low-level IRQ helper macros for Freescale MXS-based
+ *
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <mach/mxs.h>
+
+#define MXS_ICOLL_VBASE		MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
+#define HW_ICOLL_STAT_OFFSET	0x70
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
+	cmp	\irqnr, #0x7F
+	strne	\irqnr, [\base]
+	moveqs	\irqnr, #0
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =MXS_ICOLL_VBASE
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h
new file mode 100644
index 00000000000..828ccccb6aa
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/gpio.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __MACH_MXS_GPIO_H__
+#define __MACH_MXS_GPIO_H__
+
+#include <asm-generic/gpio.h>
+
+#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
+
+/* use gpiolib dispatchers */
+#define gpio_get_value		__gpio_get_value
+#define gpio_set_value		__gpio_set_value
+#define gpio_cansleep		__gpio_cansleep
+#define gpio_to_irq		__gpio_to_irq
+
+#define irq_to_gpio(irq)	((irq) - MXS_GPIO_IRQ_START)
+
+#endif /* __MACH_MXS_GPIO_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h
new file mode 100644
index 00000000000..53e89a09bf0
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/hardware.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __MACH_MXS_HARDWARE_H__
+#define __MACH_MXS_HARDWARE_H__
+
+#ifdef __ASSEMBLER__
+#define IOMEM(addr)	(addr)
+#else
+#define IOMEM(addr)	((void __force __iomem *)(addr))
+#endif
+
+#endif /* __MACH_MXS_HARDWARE_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/io.h b/arch/arm/mach-mxs/include/mach/io.h
new file mode 100644
index 00000000000..289b7227e07
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MXS_IO_H__
+#define __MACH_MXS_IO_H__
+
+/* Allow IO space to be anywhere in the memory */
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* io address mapping macro */
+#define __io(a)		__typesafe_io(a)
+
+#define __mem_pci(a)	(a)
+
+#endif /* __MACH_MXS_IO_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx23.h b/arch/arm/mach-mxs/include/mach/iomux-mx23.h
new file mode 100644
index 00000000000..94e5dd83cdb
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/iomux-mx23.h
@@ -0,0 +1,355 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX23_H__
+#define __MACH_IOMUX_MX23_H__
+
+#include <mach/iomux.h>
+
+/*
+ * The naming convention for the pad modes is MX23_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux.h
+ *
+ *									BANK	PIN	MUX
+ */
+/* MUXSEL_0 */
+#define MX23_PAD_GPMI_D00__GPMI_D00		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D01__GPMI_D01		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D02__GPMI_D02		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D03__GPMI_D03		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D04__GPMI_D04		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D05__GPMI_D05		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D06__GPMI_D06		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D07__GPMI_D07		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D08__GPMI_D08		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D09__GPMI_D09		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D10__GPMI_D10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D11__GPMI_D11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D12__GPMI_D12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D13__GPMI_D13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D14__GPMI_D14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_D15__GPMI_D15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CLE__GPMI_CLE		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_ALE__GPMI_ALE		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE2N__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY0__GPMI_RDY0		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY1__GPMI_RDY1		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY2__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDY3__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_WPN__GPMI_WPN		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_WRN__GPMI_WRN		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_RDN__GPMI_RDN		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_CTS__AUART1_CTS		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_RTS__AUART1_RTS		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_RX__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
+#define MX23_PAD_AUART1_TX__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_0)
+#define MX23_PAD_I2C_SCL__I2C_SCL		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_0)
+#define MX23_PAD_I2C_SDA__I2C_SDA		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_0)
+
+#define MX23_PAD_LCD_D00__LCD_D00		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D01__LCD_D01		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D02__LCD_D02		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D03__LCD_D03		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D04__LCD_D04		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D05__LCD_D05		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D06__LCD_D06		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D07__LCD_D07		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D08__LCD_D08		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D09__LCD_D09		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D10__LCD_D10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D11__LCD_D11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D12__LCD_D12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D13__LCD_D13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D14__LCD_D14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D15__LCD_D15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D16__LCD_D16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_D17__LCD_D17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_RESET__LCD_RESET		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_RS__LCD_RS			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_WR__LCD_WR			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_CS__LCD_CS			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_DOTCK__LCD_DOTCK		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_ENABLE__LCD_ENABLE		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_HSYNC__LCD_HSYNC		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
+#define MX23_PAD_LCD_VSYNC__LCD_VSYNC		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
+#define MX23_PAD_PWM0__PWM0			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
+#define MX23_PAD_PWM1__PWM1			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
+#define MX23_PAD_PWM2__PWM2			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
+#define MX23_PAD_PWM3__PWM3			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
+#define MX23_PAD_PWM4__PWM4			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
+
+#define MX23_PAD_SSP1_CMD__SSP1_CMD		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DETECT__SSP1_DETECT	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA0__SSP1_DATA0		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA1__SSP1_DATA1		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA2__SSP1_DATA2		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_DATA3__SSP1_DATA3		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
+#define MX23_PAD_SSP1_SCK__SSP1_SCK		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
+#define MX23_PAD_ROTARYA__ROTARYA		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
+#define MX23_PAD_ROTARYB__ROTARYB		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A00__EMI_A00		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A01__EMI_A01		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A02__EMI_A02		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A03__EMI_A03		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A04__EMI_A04		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A05__EMI_A05		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A06__EMI_A06		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A07__EMI_A07		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A08__EMI_A08		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A09__EMI_A09		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A10__EMI_A10		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A11__EMI_A11		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_A12__EMI_A12		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_BA0__EMI_BA0		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_BA1__EMI_BA1		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CASN__EMI_CASN		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CE0N__EMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CE1N__EMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE1N__GPMI_CE1N		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
+#define MX23_PAD_GPMI_CE0N__GPMI_CE0N		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CKE__EMI_CKE		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_RASN__EMI_RASN		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_WEN__EMI_WEN		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_0)
+
+#define MX23_PAD_EMI_D00__EMI_D00		MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D01__EMI_D01		MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D02__EMI_D02		MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D03__EMI_D03		MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D04__EMI_D04		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D05__EMI_D05		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D06__EMI_D06		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D07__EMI_D07		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D08__EMI_D08		MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D09__EMI_D09		MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D10__EMI_D10		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D11__EMI_D11		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D12__EMI_D12		MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D13__EMI_D13		MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D14__EMI_D14		MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_D15__EMI_D15		MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQM0__EMI_DQM0		MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQM1__EMI_DQM1		MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQS0__EMI_DQS0		MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_DQS1__EMI_DQS1		MXS_IOMUX_PAD_NAKED(3, 19, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CLK__EMI_CLK		MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
+#define MX23_PAD_EMI_CLKN__EMI_CLKN		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
+
+/* MUXSEL_1 */
+#define MX23_PAD_GPMI_D00__LCD_D8		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D01__LCD_D9		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D02__LCD_D10		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D03__LCD_D11		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D04__LCD_D12		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D05__LCD_D13		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D06__LCD_D14		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D07__LCD_D15		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D08__LCD_D18		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D09__LCD_D19		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D10__LCD_D20		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D11__LCD_D21		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D12__LCD_D22		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D13__LCD_D23		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D14__AUART2_RX		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_D15__AUART2_TX		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_CLE__LCD_D16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_ALE__LCD_D17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
+#define MX23_PAD_GPMI_CE2N__ATA_A2		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_RTS__IR_CLK		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_RX__IR_RX		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
+#define MX23_PAD_AUART1_TX__IR_TX		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_1)
+#define MX23_PAD_I2C_SCL__GPMI_RDY2		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_1)
+#define MX23_PAD_I2C_SDA__GPMI_CE2N		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_1)
+
+#define MX23_PAD_LCD_D00__ETM_DA8		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D01__ETM_DA9		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D02__ETM_DA10		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D03__ETM_DA11		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D04__ETM_DA12		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D05__ETM_DA13		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D06__ETM_DA14		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D07__ETM_DA15		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D08__ETM_DA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D09__ETM_DA1		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D10__ETM_DA2		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D11__ETM_DA3		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D12__ETM_DA4		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D13__ETM_DA5		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D14__ETM_DA6		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_D15__ETM_DA7		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_RESET__ETM_TCTL		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_RS__ETM_TCLK		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_DOTCK__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_ENABLE__I2C_SCL		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_HSYNC__I2C_SDA		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
+#define MX23_PAD_LCD_VSYNC__LCD_BUSY		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
+#define MX23_PAD_PWM0__ROTARYA			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
+#define MX23_PAD_PWM1__ROTARYB			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
+#define MX23_PAD_PWM2__GPMI_RDY3		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
+#define MX23_PAD_PWM3__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
+#define MX23_PAD_PWM4__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
+
+#define MX23_PAD_SSP1_DETECT__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_1)
+#define MX23_PAD_SSP1_DATA1__I2C_SCL		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_1)
+#define MX23_PAD_SSP1_DATA2__I2C_SDA		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
+#define MX23_PAD_ROTARYA__AUART2_RTS		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
+#define MX23_PAD_ROTARYB__AUART2_CTS		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_1)
+
+/* MUXSEL_2 */
+#define MX23_PAD_GPMI_D00__SSP2_DATA0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D01__SSP2_DATA1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D02__SSP2_DATA2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D03__SSP2_DATA3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D04__SSP2_DATA4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D05__SSP2_DATA5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D06__SSP2_DATA6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D07__SSP2_DATA7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D08__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D09__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D10__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D11__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_D15__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_RDY0__SSP2_DETECT		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_RDY1__SSP2_CMD		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
+#define MX23_PAD_GPMI_WRN__SSP2_SCK		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_CTS__SSP1_DATA4		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_RTS__SSP1_DATA5		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_RX__SSP1_DATA6		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_2)
+#define MX23_PAD_AUART1_TX__SSP1_DATA7		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_2)
+#define MX23_PAD_I2C_SCL__AUART1_TX		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_2)
+#define MX23_PAD_I2C_SDA__AUART1_RX		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_2)
+
+#define MX23_PAD_LCD_D08__SAIF2_SDATA0		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D09__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D10__SAIF_MCLK_BITCLK	MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D11__SAIF_LRCLK		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D12__SAIF2_SDATA1		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D13__SAIF2_SDATA2		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D14__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D15__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_D16__SAIF_ALT_BITCLK	MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
+#define MX23_PAD_LCD_RESET__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
+#define MX23_PAD_PWM0__DUART_RX			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_2)
+#define MX23_PAD_PWM1__DUART_TX			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_2)
+#define MX23_PAD_PWM3__AUART1_CTS		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
+#define MX23_PAD_PWM4__AUART1_RTS		MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
+
+#define MX23_PAD_SSP1_CMD__JTAG_TDO		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DETECT__USB_OTG_ID	MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA0__JTAG_TDI		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA1__JTAG_TCLK		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA2__JTAG_RTCK		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_DATA3__JTAG_TMS		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_2)
+#define MX23_PAD_SSP1_SCK__JTAG_TRST		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_2)
+#define MX23_PAD_ROTARYA__SPDIF			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_2)
+#define MX23_PAD_ROTARYB__GPMI_CE3N		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_2)
+
+/* MUXSEL_GPIO */
+#define MX23_PAD_GPMI_D00__GPO_0_0		MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D01__GPO_0_1		MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D02__GPO_0_2		MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D03__GPO_0_3		MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D04__GPO_0_4		MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D05__GPO_0_5		MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D06__GPO_0_6		MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D07__GPO_0_7		MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D08__GPO_0_8		MXS_IOMUX_PAD_NAKED(0,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D09__GPO_0_9		MXS_IOMUX_PAD_NAKED(0,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D10__GPO_0_10		MXS_IOMUX_PAD_NAKED(0, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D11__GPO_0_11		MXS_IOMUX_PAD_NAKED(0, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D12__GPO_0_12		MXS_IOMUX_PAD_NAKED(0, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D13__GPO_0_13		MXS_IOMUX_PAD_NAKED(0, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D14__GPO_0_14		MXS_IOMUX_PAD_NAKED(0, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_D15__GPO_0_15		MXS_IOMUX_PAD_NAKED(0, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CLE__GPO_0_16		MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_ALE__GPO_0_17		MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE2N__GPO_0_18		MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY0__GPO_0_19		MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY1__GPO_0_20		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY2__GPO_0_21		MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDY3__GPO_0_22		MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_WPN__GPO_0_23		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_WRN__GPO_0_24		MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_RDN__GPO_0_25		MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_CTS__GPO_0_26		MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_RTS__GPO_0_27		MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_RX__GPO_0_28		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_AUART1_TX__GPO_0_29		MXS_IOMUX_PAD_NAKED(0, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_I2C_SCL__GPO_0_30		MXS_IOMUX_PAD_NAKED(0, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_I2C_SDA__GPO_0_31		MXS_IOMUX_PAD_NAKED(0, 31, PAD_MUXSEL_GPIO)
+
+#define MX23_PAD_LCD_D00__GPO_1_0		MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D01__GPO_1_1		MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D02__GPO_1_2		MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D03__GPO_1_3		MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D04__GPO_1_4		MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D05__GPO_1_5		MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D06__GPO_1_6		MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D07__GPO_1_7		MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D08__GPO_1_8		MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D09__GPO_1_9		MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D10__GPO_1_10		MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D11__GPO_1_11		MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D12__GPO_1_12		MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D13__GPO_1_13		MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D14__GPO_1_14		MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D15__GPO_1_15		MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D16__GPO_1_16		MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_D17__GPO_1_17		MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_RESET__GPO_1_18		MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_RS__GPO_1_19		MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_WR__GPO_1_20		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_CS__GPO_1_21		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_DOTCK__GPO_1_22		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_ENABLE__GPO_1_23		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_HSYNC__GPO_1_24		MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_LCD_VSYNC__GPO_1_25		MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM0__GPO_1_26			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM1__GPO_1_27			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM2__GPO_1_28			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM3__GPO_1_29			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_PWM4__GPO_1_30			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+
+#define MX23_PAD_SSP1_CMD__GPO_2_0		MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DETECT__GPO_2_1		MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA0__GPO_2_2		MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA1__GPO_2_3		MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA2__GPO_2_4		MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_DATA3__GPO_2_5		MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
+#define MX23_PAD_SSP1_SCK__GPO_2_6		MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
+#define MX23_PAD_ROTARYA__GPO_2_7		MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
+#define MX23_PAD_ROTARYB__GPO_2_8		MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A00__GPO_2_9		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A01__GPO_2_10		MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A02__GPO_2_11		MXS_IOMUX_PAD_NAKED(2, 11, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A03__GPO_2_12		MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A04__GPO_2_13		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A05__GPO_2_14		MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A06__GPO_2_15		MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A07__GPO_2_16		MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A08__GPO_2_17		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A09__GPO_2_18		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A10__GPO_2_19		MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A11__GPO_2_20		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_A12__GPO_2_21		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_BA0__GPO_2_22		MXS_IOMUX_PAD_NAKED(2, 22, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_BA1__GPO_2_23		MXS_IOMUX_PAD_NAKED(2, 23, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CASN__GPO_2_24		MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CE0N__GPO_2_25		MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CE1N__GPO_2_26		MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE1N__GPO_2_27		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+#define MX23_PAD_GPMI_CE0N__GPO_2_28		MXS_IOMUX_PAD_NAKED(2, 28, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_CKE__GPO_2_29		MXS_IOMUX_PAD_NAKED(2, 29, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_RASN__GPO_2_30		MXS_IOMUX_PAD_NAKED(2, 30, PAD_MUXSEL_GPIO)
+#define MX23_PAD_EMI_WEN__GPO_2_31		MXS_IOMUX_PAD_NAKED(2, 31, PAD_MUXSEL_GPIO)
+
+#endif /* __MACH_IOMUX_MX23_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux-mx28.h b/arch/arm/mach-mxs/include/mach/iomux-mx28.h
new file mode 100644
index 00000000000..f50fefd1052
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/iomux-mx28.h
@@ -0,0 +1,537 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX28_H__
+#define __MACH_IOMUX_MX28_H__
+
+#include <mach/iomux.h>
+
+/*
+ * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux.h
+ *
+ *									BANK	PIN	MUX
+ */
+/* MUXSEL_0 */
+#define MX28_PAD_GPMI_D00__GPMI_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D01__GPMI_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D02__GPMI_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D03__GPMI_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D04__GPMI_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D05__GPMI_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D06__GPMI_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D07__GPMI_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDN__GPMI_RDN			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_WRN__GPMI_WRN			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_ALE__GPMI_ALE			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CLE__GPMI_CLE			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN		MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
+
+#define MX28_PAD_LCD_D00__LCD_D0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D01__LCD_D1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D02__LCD_D2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D03__LCD_D3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D04__LCD_D4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D05__LCD_D5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D06__LCD_D6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D07__LCD_D7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D08__LCD_D8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D09__LCD_D9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D10__LCD_D10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D11__LCD_D11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D12__LCD_D12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D13__LCD_D13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D14__LCD_D14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D15__LCD_D15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D16__LCD_D16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D17__LCD_D17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D18__LCD_D18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D19__LCD_D19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D20__LCD_D20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D21__LCD_D21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D22__LCD_D22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D23__LCD_D23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RD_E__LCD_RD_E			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RS__LCD_RS				MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_CS__LCD_CS				MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
+
+#define MX28_PAD_SSP0_DATA0__SSP0_D0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA1__SSP0_D1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA2__SSP0_D2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA3__SSP0_D3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA4__SSP0_D4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA5__SSP0_D5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA6__SSP0_D6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA7__SSP0_D7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_CMD__SSP0_CMD			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT		MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_SCK__SSP0_SCK			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_SCK__SSP1_SCK			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_CMD__SSP1_CMD			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA0__SSP1_D0			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA3__SSP1_D3			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SCK__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MISO__SSP2_D0			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS0__SSP2_D3			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS1__SSP2_D4			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS2__SSP2_D5			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SCK__SSP3_SCK			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MISO__SSP3_D0			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SS0__SSP3_D3			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
+
+#define MX28_PAD_AUART0_RX__AUART0_RX			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_TX__AUART0_TX			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_CTS__AUART0_CTS			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_RTS__AUART0_RTS			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RX__AUART1_RX			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_TX__AUART1_TX			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_CTS__AUART1_CTS			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RTS__AUART1_RTS			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RX__AUART2_RX			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_TX__AUART2_TX			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_CTS__AUART2_CTS			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RTS__AUART2_RTS			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RX__AUART3_RX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_TX__AUART3_TX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_CTS__AUART3_CTS			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RTS__AUART3_RTS			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
+#define MX28_PAD_PWM0__PWM_0				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
+#define MX28_PAD_PWM1__PWM_1				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
+#define MX28_PAD_PWM2__PWM_2				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SCL__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SDA__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SPDIF__SPDIF_TX			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
+#define MX28_PAD_PWM3__PWM_3				MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
+#define MX28_PAD_PWM4__PWM_4				MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RESET__LCD_RESET			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
+
+#define MX28_PAD_ENET0_MDC__ENET0_MDC			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_COL__ENET0_COL			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_CRS__ENET0_CRS			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_D00__EMI_DATA0			MXS_IOMUX_PAD_NAKED(5,  0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D01__EMI_DATA1			MXS_IOMUX_PAD_NAKED(5,  1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D02__EMI_DATA2			MXS_IOMUX_PAD_NAKED(5,  2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D03__EMI_DATA3			MXS_IOMUX_PAD_NAKED(5,  3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D04__EMI_DATA4			MXS_IOMUX_PAD_NAKED(5,  4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D05__EMI_DATA5			MXS_IOMUX_PAD_NAKED(5,  5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D06__EMI_DATA6			MXS_IOMUX_PAD_NAKED(5,  6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D07__EMI_DATA7			MXS_IOMUX_PAD_NAKED(5,  7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D08__EMI_DATA8			MXS_IOMUX_PAD_NAKED(5,  8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D09__EMI_DATA9			MXS_IOMUX_PAD_NAKED(5,  9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D10__EMI_DATA10			MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D11__EMI_DATA11			MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D12__EMI_DATA12			MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D13__EMI_DATA13			MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D14__EMI_DATA14			MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D15__EMI_DATA15			MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT0__EMI_ODT0			MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM0__EMI_DQM0			MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT1__EMI_ODT1			MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM1__EMI_DQM1			MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK	MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CLK__EMI_CLK			MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS0__EMI_DQS0			MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS1__EMI_DQS1			MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN		MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_A00__EMI_ADDR0			MXS_IOMUX_PAD_NAKED(6,  0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A01__EMI_ADDR1			MXS_IOMUX_PAD_NAKED(6,  1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A02__EMI_ADDR2			MXS_IOMUX_PAD_NAKED(6,  2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A03__EMI_ADDR3			MXS_IOMUX_PAD_NAKED(6,  3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A04__EMI_ADDR4			MXS_IOMUX_PAD_NAKED(6,  4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A05__EMI_ADDR5			MXS_IOMUX_PAD_NAKED(6,  5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A06__EMI_ADDR6			MXS_IOMUX_PAD_NAKED(6,  6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A07__EMI_ADDR7			MXS_IOMUX_PAD_NAKED(6,  7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A08__EMI_ADDR8			MXS_IOMUX_PAD_NAKED(6,  8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A09__EMI_ADDR9			MXS_IOMUX_PAD_NAKED(6,  9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A10__EMI_ADDR10			MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A11__EMI_ADDR11			MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A12__EMI_ADDR12			MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A13__EMI_ADDR13			MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A14__EMI_ADDR14			MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA0__EMI_BA0			MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA1__EMI_BA1			MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA2__EMI_BA2			MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CASN__EMI_CASN			MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_RASN__EMI_RASN			MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_WEN__EMI_WEN			MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE0N__EMI_CE0N			MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE1N__EMI_CE1N			MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CKE__EMI_CKE			MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
+
+/* MUXSEL_1 */
+#define MX28_PAD_GPMI_D00__SSP1_D0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D01__SSP1_D1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D02__SSP1_D2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D03__SSP1_D3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D04__SSP1_D4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D05__SSP1_D5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D06__SSP1_D6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D07__SSP1_D7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE0N__SSP3_D0			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE1N__SSP3_D3			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE2N__CAN1_TX			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE3N__CAN1_RX			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT		MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY2__CAN0_TX			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY3__CAN0_RX			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDN__SSP3_SCK			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_WRN__SSP1_SCK			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_ALE__SSP3_D1			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CLE__SSP3_D2			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
+
+#define MX28_PAD_LCD_D03__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D04__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D08__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D09__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT		MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT		MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN		MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RS__LCD_DOTCLK			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_CS__LCD_ENABLE			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0		MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_SSP0_DATA4__SSP2_D0			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA5__SSP2_D3			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_SCK__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_CMD__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA0__SSP2_D6			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA3__SSP2_D7			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SCK__AUART2_RX			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MOSI__AUART2_TX			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MISO__AUART3_RX			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS0__AUART3_TX			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS1__SSP2_D1			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS2__SSP2_D2			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SCK__AUART4_TX			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MOSI__AUART4_RX			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MISO__AUART4_RTS			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SS0__AUART4_CTS			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
+
+#define MX28_PAD_AUART0_RX__I2C0_SCL			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_TX__I2C0_SDA			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_CTS__AUART4_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_RTS__AUART4_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT		MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RTS__USB0_ID			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RX__SSP3_D1			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_TX__SSP3_D2			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_CTS__I2C1_SCL			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RTS__I2C1_SDA			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RX__CAN0_TX			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_TX__CAN0_RX			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_CTS__CAN1_TX			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RTS__CAN1_RX			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
+#define MX28_PAD_PWM0__I2C1_SCL				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
+#define MX28_PAD_PWM1__I2C1_SDA				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
+#define MX28_PAD_PWM2__USB0_ID				MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_MCLK__PWM_3			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_LRCLK__PWM_4			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_BITCLK__PWM_5			MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_SDATA0__PWM_6			MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF1_SDATA0__PWM_7			MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RESET__LCD_VSYNC			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4		MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5		MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6		MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7		MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
+
+/* MUXSEL_2 */
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY0__USB0_ID			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER		MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_ALE__SSP3_D4			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CLE__SSP3_D5			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_LCD_D00__ETM_DA0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D01__ETM_DA1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D02__ETM_DA2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D03__ETM_DA3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D04__ETM_DA4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D05__ETM_DA5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D06__ETM_DA6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D07__ETM_DA7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D08__ETM_DA8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D09__ETM_DA9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D10__ETM_DA10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D11__ETM_DA11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D12__ETM_DA12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D13__ETM_DA13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D14__ETM_DA14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D15__ETM_DA15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D16__ETM_DA7			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D17__ETM_DA6			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D18__ETM_DA5			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D19__ETM_DA4			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D20__ETM_DA3			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D21__ETM_DA2			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D22__ETM_DA1			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D23__ETM_DA0			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_RD_E__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
+
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN		MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT		MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN		MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_AUART0_RX__DUART_CTS			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_TX__DUART_RTS			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_CTS__DUART_RX			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_RTS__DUART_TX			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RX__PWM_0			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_TX__PWM_1			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA		MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB		MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RX__SSP3_D4			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_TX__SSP3_D5			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK		MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK		MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
+#define MX28_PAD_PWM0__DUART_RX				MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
+#define MX28_PAD_PWM1__DUART_TX				MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
+#define MX28_PAD_PWM2__USB1_OVERCURRENT			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS		MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SCL__DUART_RX			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SDA__DUART_TX			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SPDIF__ENET1_RX_ER			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1		MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2		MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1		MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2		MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT	MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT	MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN	MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT	MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN	MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN	MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT	MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN	MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
+
+/* MUXSEL_GPIO */
+#define MX28_PAD_GPMI_D00__GPIO_0_0			MXS_IOMUX_PAD_NAKED(0,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D01__GPIO_0_1			MXS_IOMUX_PAD_NAKED(0,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D02__GPIO_0_2			MXS_IOMUX_PAD_NAKED(0,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D03__GPIO_0_3			MXS_IOMUX_PAD_NAKED(0,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D04__GPIO_0_4			MXS_IOMUX_PAD_NAKED(0,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D05__GPIO_0_5			MXS_IOMUX_PAD_NAKED(0,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D06__GPIO_0_6			MXS_IOMUX_PAD_NAKED(0,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D07__GPIO_0_7			MXS_IOMUX_PAD_NAKED(0,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16			MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17			MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18			MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19			MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20			MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21			MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22			MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23			MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDN__GPIO_0_24			MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_WRN__GPIO_0_25			MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_ALE__GPIO_0_26			MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CLE__GPIO_0_27			MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28			MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_LCD_D00__GPIO_1_0			MXS_IOMUX_PAD_NAKED(1,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D01__GPIO_1_1			MXS_IOMUX_PAD_NAKED(1,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D02__GPIO_1_2			MXS_IOMUX_PAD_NAKED(1,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D03__GPIO_1_3			MXS_IOMUX_PAD_NAKED(1,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D04__GPIO_1_4			MXS_IOMUX_PAD_NAKED(1,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D05__GPIO_1_5			MXS_IOMUX_PAD_NAKED(1,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D06__GPIO_1_6			MXS_IOMUX_PAD_NAKED(1,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D07__GPIO_1_7			MXS_IOMUX_PAD_NAKED(1,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D08__GPIO_1_8			MXS_IOMUX_PAD_NAKED(1,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D09__GPIO_1_9			MXS_IOMUX_PAD_NAKED(1,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D10__GPIO_1_10			MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D11__GPIO_1_11			MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D12__GPIO_1_12			MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D13__GPIO_1_13			MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D14__GPIO_1_14			MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D15__GPIO_1_15			MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D16__GPIO_1_16			MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D17__GPIO_1_17			MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D18__GPIO_1_18			MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D19__GPIO_1_19			MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D20__GPIO_1_20			MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D21__GPIO_1_21			MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D22__GPIO_1_22			MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D23__GPIO_1_23			MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RD_E__GPIO_1_24			MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25			MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RS__GPIO_1_26			MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_CS__GPIO_1_27			MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28			MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29			MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30			MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31			MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0			MXS_IOMUX_PAD_NAKED(2,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1			MXS_IOMUX_PAD_NAKED(2,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2			MXS_IOMUX_PAD_NAKED(2,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3			MXS_IOMUX_PAD_NAKED(2,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4			MXS_IOMUX_PAD_NAKED(2,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5			MXS_IOMUX_PAD_NAKED(2,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6			MXS_IOMUX_PAD_NAKED(2,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7			MXS_IOMUX_PAD_NAKED(2,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_CMD__GPIO_2_8			MXS_IOMUX_PAD_NAKED(2,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9			MXS_IOMUX_PAD_NAKED(2,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_SCK__GPIO_2_10			MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_SCK__GPIO_2_12			MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_CMD__GPIO_2_13			MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14			MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15			MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SCK__GPIO_2_16			MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17			MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MISO__GPIO_2_18			MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS0__GPIO_2_19			MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS1__GPIO_2_20			MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS2__GPIO_2_21			MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SCK__GPIO_2_24			MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25			MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MISO__GPIO_2_26			MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SS0__GPIO_2_27			MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_AUART0_RX__GPIO_3_0			MXS_IOMUX_PAD_NAKED(3,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_TX__GPIO_3_1			MXS_IOMUX_PAD_NAKED(3,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_CTS__GPIO_3_2			MXS_IOMUX_PAD_NAKED(3,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_RTS__GPIO_3_3			MXS_IOMUX_PAD_NAKED(3,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RX__GPIO_3_4			MXS_IOMUX_PAD_NAKED(3,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_TX__GPIO_3_5			MXS_IOMUX_PAD_NAKED(3,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_CTS__GPIO_3_6			MXS_IOMUX_PAD_NAKED(3,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RTS__GPIO_3_7			MXS_IOMUX_PAD_NAKED(3,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RX__GPIO_3_8			MXS_IOMUX_PAD_NAKED(3,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_TX__GPIO_3_9			MXS_IOMUX_PAD_NAKED(3,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_CTS__GPIO_3_10			MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RTS__GPIO_3_11			MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RX__GPIO_3_12			MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_TX__GPIO_3_13			MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_CTS__GPIO_3_14			MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RTS__GPIO_3_15			MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM0__GPIO_3_16			MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM1__GPIO_3_17			MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM2__GPIO_3_18			MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20			MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21			MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22		MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23		MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SCL__GPIO_3_24			MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SDA__GPIO_3_25			MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26		MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SPDIF__GPIO_3_27			MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM3__GPIO_3_28			MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM4__GPIO_3_29			MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RESET__GPIO_3_30			MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_ENET0_MDC__GPIO_4_0			MXS_IOMUX_PAD_NAKED(4,  0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1			MXS_IOMUX_PAD_NAKED(4,  1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2			MXS_IOMUX_PAD_NAKED(4,  2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3			MXS_IOMUX_PAD_NAKED(4,  3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4			MXS_IOMUX_PAD_NAKED(4,  4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5			MXS_IOMUX_PAD_NAKED(4,  5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6			MXS_IOMUX_PAD_NAKED(4,  6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7			MXS_IOMUX_PAD_NAKED(4,  7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8			MXS_IOMUX_PAD_NAKED(4,  8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9			MXS_IOMUX_PAD_NAKED(4,  9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10			MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11			MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12			MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13		MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_COL__GPIO_4_14			MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_CRS__GPIO_4_15			MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET_CLK__GPIO_4_16			MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20			MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
+
+#endif /* __MACH_IOMUX_MX28_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/iomux.h b/arch/arm/mach-mxs/include/mach/iomux.h
new file mode 100644
index 00000000000..fe558e3c5a9
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/iomux.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *			<armlinux@phytec.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MXS_IOMUX_H__
+#define __MACH_MXS_IOMUX_H__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ *
+ * PAD_BANK:		 0..2	(3)
+ * PAD_PIN:		 3..7	(5)
+ * PAD_MUXSEL:		 8..9	(2)
+ * PAD_MA:		10..11	(2)
+ * PAD_MA_VALID:	12	(1)
+ * PAD_VOL:		13	(1)
+ * PAD_VOL_VALID:	14	(1)
+ * PAD_PULL:		15	(1)
+ * PAD_PULL_VALID:	16	(1)
+ * RESERVED:		17..31	(15)
+ */
+typedef u32 iomux_cfg_t;
+
+#define MXS_PAD_BANK_SHIFT	0
+#define MXS_PAD_BANK_MASK	((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
+#define MXS_PAD_PIN_SHIFT	3
+#define MXS_PAD_PIN_MASK	((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
+#define MXS_PAD_MUXSEL_SHIFT	8
+#define MXS_PAD_MUXSEL_MASK	((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
+#define MXS_PAD_MA_SHIFT	10
+#define MXS_PAD_MA_MASK		((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
+#define MXS_PAD_MA_VALID_SHIFT	12
+#define MXS_PAD_MA_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
+#define MXS_PAD_VOL_SHIFT	13
+#define MXS_PAD_VOL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
+#define MXS_PAD_VOL_VALID_SHIFT	14
+#define MXS_PAD_VOL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
+#define MXS_PAD_PULL_SHIFT	15
+#define MXS_PAD_PULL_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
+#define MXS_PAD_PULL_VALID_SHIFT 16
+#define MXS_PAD_PULL_VALID_MASK	((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
+
+#define PAD_MUXSEL_0		0
+#define PAD_MUXSEL_1		1
+#define PAD_MUXSEL_2		2
+#define PAD_MUXSEL_GPIO		3
+
+#define PAD_4MA			0
+#define PAD_8MA			1
+#define PAD_12MA		2
+#define PAD_16MA		3
+
+#define PAD_1V8			0
+#define PAD_3V3			1
+
+#define PAD_NOPULL		0
+#define PAD_PULLUP		1
+
+#define MXS_PAD_4MA	((PAD_4MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_8MA	((PAD_8MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_12MA	((PAD_12MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_16MA	((PAD_16MA << MXS_PAD_MA_SHIFT) | \
+					MXS_PAD_MA_VALID_MASK)
+
+#define MXS_PAD_1V8	((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
+					MXS_PAD_VOL_VALID_MASK)
+#define MXS_PAD_3V3	((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
+					MXS_PAD_VOL_VALID_MASK)
+
+#define MXS_PAD_NOPULL	((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
+					MXS_PAD_PULL_VALID_MASK)
+#define MXS_PAD_PULLUP	((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
+					MXS_PAD_PULL_VALID_MASK)
+
+#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull)		\
+		(((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) |		\
+		((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) |		\
+		((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) |	\
+		((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) |		\
+		((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) |		\
+		((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
+
+/*
+ * A pad becomes naked, when none of mA, vol or pull
+ * validity bits is set.
+ */
+#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
+		MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
+
+static inline unsigned int PAD_BANK(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
+}
+
+static inline unsigned int PAD_PIN(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
+}
+
+static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
+}
+
+static inline unsigned int PAD_MA(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
+}
+
+static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_VOL(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
+}
+
+static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_PULL(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
+}
+
+static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
+{
+	return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
+}
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad);
+
+/*
+ * configures multiple pads
+ * convenient way to call the above function with tables
+ */
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
+
+#endif /* __MACH_MXS_IOMUX_H__*/
diff --git a/arch/arm/mach-mxs/include/mach/irqs.h b/arch/arm/mach-mxs/include/mach/irqs.h
new file mode 100644
index 00000000000..f771039b814
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/irqs.h
@@ -0,0 +1,32 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MXS_IRQS_H__
+#define __MACH_MXS_IRQS_H__
+
+#define MXS_INTERNAL_IRQS	128
+
+#define MXS_GPIO_IRQ_START	MXS_INTERNAL_IRQS
+
+/* the maximum for MXS-based */
+#define MXS_GPIO_IRQS		(32 * 5)
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase MXS_BOARD_IRQS, but keep it
+ * within sensible limits.
+ */
+#define MXS_BOARD_IRQ_START	(MXS_GPIO_IRQ_START + MXS_GPIO_IRQS)
+#define MXS_BOARD_IRQS		16
+
+#define NR_IRQS			(MXS_BOARD_IRQ_START + MXS_BOARD_IRQS)
+
+#endif /* __MACH_MXS_IRQS_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h
new file mode 100644
index 00000000000..b5420a5c2d4
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/memory.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MXS_MEMORY_H__
+#define __MACH_MXS_MEMORY_H__
+
+#define PHYS_OFFSET		UL(0x40000000)
+
+#endif /* __MACH_MXS_MEMORY_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mx23.h b/arch/arm/mach-mxs/include/mach/mx23.h
new file mode 100644
index 00000000000..9edd02ec8e3
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/mx23.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX23_H__
+#define __MACH_MX23_H__
+
+#include <mach/mxs.h>
+
+/*
+ * OCRAM
+ */
+#define MX23_OCRAM_BASE_ADDR		0x00000000
+#define MX23_OCRAM_SIZE			SZ_32K
+
+/*
+ * IO
+ */
+#define MX23_IO_BASE_ADDR		0x80000000
+#define MX23_IO_SIZE			SZ_1M
+
+#define MX23_ICOLL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x000000)
+#define MX23_APBH_DMA_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x004000)
+#define MX23_BCH_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x00a000)
+#define MX23_GPMI_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x00c000)
+#define MX23_SSP1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x010000)
+#define MX23_PINCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x018000)
+#define MX23_DIGCTL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x01c000)
+#define MX23_ETM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x020000)
+#define MX23_APBX_DMA_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x024000)
+#define MX23_DCP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x028000)
+#define MX23_PXP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02a000)
+#define MX23_OCOTP_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02c000)
+#define MX23_AXI_AHB0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x02e000)
+#define MX23_LCDIF_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x030000)
+#define MX23_SSP2_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x034000)
+#define MX23_TVENC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x038000)
+#define MX23_CLKCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x040000)
+#define MX23_SAIF0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x042000)
+#define MX23_POWER_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x044000)
+#define MX23_SAIF1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x046000)
+#define MX23_AUDIOOUT_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x048000)
+#define MX23_AUDIOIN_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x04c000)
+#define MX23_LRADC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x050000)
+#define MX23_SPDIF_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x054000)
+#define MX23_I2C0_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x058000)
+#define MX23_RTC_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x05c000)
+#define MX23_PWM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x064000)
+#define MX23_TIMROT_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x068000)
+#define MX23_AUART1_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x06c000)
+#define MX23_AUART2_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x06e000)
+#define MX23_DUART_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x070000)
+#define MX23_USBPHY_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x07c000)
+#define MX23_USBCTRL_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x080000)
+#define MX23_DRAM_BASE_ADDR		(MX23_IO_BASE_ADDR + 0x0e0000)
+
+#define MX23_IO_P2V(x)			MXS_IO_P2V(x)
+#define MX23_IO_ADDRESS(x)		IOMEM(MX23_IO_P2V(x))
+
+/*
+ * IRQ
+ */
+#define MX23_INT_DUART			0
+#define MX23_INT_COMMS_RX		1
+#define MX23_INT_COMMS_TX		1
+#define MX23_INT_SSP2_ERROR		2
+#define MX23_INT_VDD5V			3
+#define MX23_INT_HEADPHONE_SHORT	4
+#define MX23_INT_DAC_DMA		5
+#define MX23_INT_DAC_ERROR		6
+#define MX23_INT_ADC_DMA		7
+#define MX23_INT_ADC_ERROR		8
+#define MX23_INT_SPDIF_DMA		9
+#define MX23_INT_SAIF2_DMA		9
+#define MX23_INT_SPDIF_ERROR		10
+#define MX23_INT_SAIF1_IRQ		10
+#define MX23_INT_SAIF2_IRQ		10
+#define MX23_INT_USB_CTRL		11
+#define MX23_INT_USB_WAKEUP		12
+#define MX23_INT_GPMI_DMA		13
+#define MX23_INT_SSP1_DMA		14
+#define MX23_INT_SSP_ERROR		15
+#define MX23_INT_GPIO0			16
+#define MX23_INT_GPIO1			17
+#define MX23_INT_GPIO2			18
+#define MX23_INT_SAIF1_DMA		19
+#define MX23_INT_SSP2_DMA		20
+#define MX23_INT_ECC8_IRQ		21
+#define MX23_INT_RTC_ALARM		22
+#define MX23_INT_UARTAPP_TX_DMA		23
+#define MX23_INT_UARTAPP_INTERNAL	24
+#define MX23_INT_UARTAPP_RX_DMA		25
+#define MX23_INT_I2C_DMA		26
+#define MX23_INT_I2C_ERROR		27
+#define MX23_INT_TIMER0			28
+#define MX23_INT_TIMER1			29
+#define MX23_INT_TIMER2			30
+#define MX23_INT_TIMER3			31
+#define MX23_INT_BATT_BRNOUT		32
+#define MX23_INT_VDDD_BRNOUT		33
+#define MX23_INT_VDDIO_BRNOUT		34
+#define MX23_INT_VDD18_BRNOUT		35
+#define MX23_INT_TOUCH_DETECT		36
+#define MX23_INT_LRADC_CH0		37
+#define MX23_INT_LRADC_CH1		38
+#define MX23_INT_LRADC_CH2		39
+#define MX23_INT_LRADC_CH3		40
+#define MX23_INT_LRADC_CH4		41
+#define MX23_INT_LRADC_CH5		42
+#define MX23_INT_LRADC_CH6		43
+#define MX23_INT_LRADC_CH7		44
+#define MX23_INT_LCDIF_DMA		45
+#define MX23_INT_LCDIF_ERROR		46
+#define MX23_INT_DIGCTL_DEBUG_TRAP	47
+#define MX23_INT_RTC_1MSEC		48
+#define MX23_INT_DRI_DMA		49
+#define MX23_INT_DRI_ATTENTION		50
+#define MX23_INT_GPMI_ATTENTION		51
+#define MX23_INT_IR			52
+#define MX23_INT_DCP_VMI		53
+#define MX23_INT_DCP			54
+#define MX23_INT_BCH			56
+#define MX23_INT_PXP			57
+#define MX23_INT_UARTAPP2_TX_DMA	58
+#define MX23_INT_UARTAPP2_INTERNAL	59
+#define MX23_INT_UARTAPP2_RX_DMA	60
+#define MX23_INT_VDAC_DETECT		61
+#define MX23_INT_VDD5V_DROOP		64
+#define MX23_INT_DCDC4P2_BO		65
+
+#endif /* __MACH_MX23_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h
new file mode 100644
index 00000000000..0716745267a
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/mx28.h
@@ -0,0 +1,188 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX28_H__
+#define __MACH_MX28_H__
+
+#include <mach/mxs.h>
+
+/*
+ * OCRAM
+ */
+#define MX28_OCRAM_BASE_ADDR		0x00000000
+#define MX28_OCRAM_SIZE			SZ_128K
+
+/*
+ * IO
+ */
+#define MX28_IO_BASE_ADDR		0x80000000
+#define MX28_IO_SIZE			SZ_1M
+
+#define MX28_ICOLL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x000000)
+#define MX28_HSADC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x002000)
+#define MX28_APBH_DMA_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x004000)
+#define MX28_PERFMON_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x006000)
+#define MX28_BCH_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x00a000)
+#define MX28_GPMI_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x00c000)
+#define MX28_SSP0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x010000)
+#define MX28_SSP1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x012000)
+#define MX28_SSP2_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x014000)
+#define MX28_SSP3_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x016000)
+#define MX28_PINCTRL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x018000)
+#define MX28_DIGCTL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x01c000)
+#define MX28_ETM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x022000)
+#define MX28_APBX_DMA_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x024000)
+#define MX28_DCP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x028000)
+#define MX28_PXP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02a000)
+#define MX28_OCOTP_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02c000)
+#define MX28_AXI_AHB0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x02e000)
+#define MX28_LCDIF_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x030000)
+#define MX28_CAN0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x032000)
+#define MX28_CAN1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x034000)
+#define MX28_SIMDBG_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c000)
+#define MX28_SIMGPMISEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c200)
+#define MX28_SIMSSPSEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c300)
+#define MX28_SIMMEMSEL_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x03c400)
+#define MX28_GPIOMON_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c500)
+#define MX28_SIMENET_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c700)
+#define MX28_ARMJTAG_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x03c800)
+#define MX28_CLKCTRL_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x040000)
+#define MX28_SAIF0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x042000)
+#define MX28_POWER_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x044000)
+#define MX28_SAIF1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x046000)
+#define MX28_LRADC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x050000)
+#define MX28_SPDIF_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x054000)
+#define MX28_RTC_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x056000)
+#define MX28_I2C0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x058000)
+#define MX28_I2C1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x05a000)
+#define MX28_PWM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x064000)
+#define MX28_TIMROT_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x068000)
+#define MX28_AUART0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06a000)
+#define MX28_AUART1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06c000)
+#define MX28_AUART2_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x06e000)
+#define MX28_AUART3_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x070000)
+#define MX28_AUART4_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x072000)
+#define MX28_DUART_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x074000)
+#define MX28_USBPHY0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x07C000)
+#define MX28_USBPHY1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x07e000)
+#define MX28_USBCTRL0_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x080000)
+#define MX28_USBCTRL1_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x090000)
+#define MX28_DFLPT_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x0c0000)
+#define MX28_DRAM_BASE_ADDR		(MX28_IO_BASE_ADDR + 0x0e0000)
+#define MX28_ENET_MAC0_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x0f0000)
+#define MX28_ENET_MAC1_BASE_ADDR	(MX28_IO_BASE_ADDR + 0x0f4000)
+
+#define MX28_IO_P2V(x)			MXS_IO_P2V(x)
+#define MX28_IO_ADDRESS(x)		IOMEM(MX28_IO_P2V(x))
+
+/*
+ * IRQ
+ */
+#define MX28_INT_BATT_BRNOUT		0
+#define MX28_INT_VDDD_BRNOUT		1
+#define MX28_INT_VDDIO_BRNOUT		2
+#define MX28_INT_VDDA_BRNOUT		3
+#define MX28_INT_VDD5V_DROOP		4
+#define MX28_INT_DCDC4P2_BRNOUT		5
+#define MX28_INT_VDD5V			6
+#define MX28_INT_CAN0			8
+#define MX28_INT_CAN1			9
+#define MX28_INT_LRADC_TOUCH		10
+#define MX28_INT_HSADC			13
+#define MX28_INT_IRADC_THRESH0		14
+#define MX28_INT_IRADC_THRESH1		15
+#define MX28_INT_LRADC_CH0		16
+#define MX28_INT_LRADC_CH1		17
+#define MX28_INT_LRADC_CH2		18
+#define MX28_INT_LRADC_CH3		19
+#define MX28_INT_LRADC_CH4		20
+#define MX28_INT_LRADC_CH5		21
+#define MX28_INT_LRADC_CH6		22
+#define MX28_INT_LRADC_CH7		23
+#define MX28_INT_LRADC_BUTTON0		24
+#define MX28_INT_LRADC_BUTTON1		25
+#define MX28_INT_PERFMON		27
+#define MX28_INT_RTC_1MSEC		28
+#define MX28_INT_RTC_ALARM		29
+#define MX28_INT_COMMS			31
+#define MX28_INT_EMI_ERR		32
+#define MX28_INT_LCDIF			38
+#define MX28_INT_PXP			39
+#define MX28_INT_BCH			41
+#define MX28_INT_GPMI			42
+#define MX28_INT_SPDIF_ERROR		45
+#define MX28_INT_DUART			47
+#define MX28_INT_TIMER0			48
+#define MX28_INT_TIMER1			49
+#define MX28_INT_TIMER2			50
+#define MX28_INT_TIMER3			51
+#define MX28_INT_DCP_VMI		52
+#define MX28_INT_DCP			53
+#define MX28_INT_DCP_SECURE		54
+#define MX28_INT_SAIF1			58
+#define MX28_INT_SAIF0			59
+#define MX28_INT_SPDIF_DMA		66
+#define MX28_INT_I2C0_DMA		68
+#define MX28_INT_I2C1_DMA		69
+#define MX28_INT_AUART0_RX_DMA		70
+#define MX28_INT_AUART0_TX_DMA		71
+#define MX28_INT_AUART1_RX_DMA		72
+#define MX28_INT_AUART1_TX_DMA		73
+#define MX28_INT_AUART2_RX_DMA		74
+#define MX28_INT_AUART2_TX_DMA		75
+#define MX28_INT_AUART3_RX_DMA		76
+#define MX28_INT_AUART3_TX_DMA		77
+#define MX28_INT_AUART4_RX_DMA		78
+#define MX28_INT_AUART4_TX_DMA		79
+#define MX28_INT_SAIF0_DMA		80
+#define MX28_INT_SAIF1_DMA		81
+#define MX28_INT_SSP0_DMA		82
+#define MX28_INT_SSP1_DMA		83
+#define MX28_INT_SSP2_DMA		84
+#define MX28_INT_SSP3_DMA		85
+#define MX28_INT_LCDIF_DMA		86
+#define MX28_INT_HSADC_DMA		87
+#define MX28_INT_GPMI_DMA		88
+#define MX28_INT_DIGCTL_DEBUG_TRAP	89
+#define MX28_INT_USB1			92
+#define MX28_INT_USB0			93
+#define MX28_INT_USB1_WAKEUP		94
+#define MX28_INT_USB0_WAKEUP		95
+#define MX28_INT_SSP0			96
+#define MX28_INT_SSP1			97
+#define MX28_INT_SSP2			98
+#define MX28_INT_SSP3			99
+#define MX28_INT_ENET_SWI		100
+#define MX28_INT_ENET_MAC0		101
+#define MX28_INT_ENET_MAC1		102
+#define MX28_INT_ENET_MAC0_1588		103
+#define MX28_INT_ENET_MAC1_1588		104
+#define MX28_INT_I2C1_ERROR		110
+#define MX28_INT_I2C0_ERROR		111
+#define MX28_INT_AUART0			112
+#define MX28_INT_AUART1			113
+#define MX28_INT_AUART2			114
+#define MX28_INT_AUART3			115
+#define MX28_INT_AUART4			116
+#define MX28_INT_GPIO4			123
+#define MX28_INT_GPIO3			124
+#define MX28_INT_GPIO2			125
+#define MX28_INT_GPIO1			126
+#define MX28_INT_GPIO0			127
+
+#endif /* __MACH_MX28_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
new file mode 100644
index 00000000000..f186c08c291
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MXS_H__
+#define __MACH_MXS_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+/*
+ * MXS CPU types
+ */
+#define cpu_is_mx23()		(machine_is_mx23evk())
+#define cpu_is_mx28()		(machine_is_mx28evk())
+
+/*
+ * IO addresses common to MXS-based
+ */
+#define MXS_IO_BASE_ADDR		0x80000000
+#define MXS_IO_SIZE			SZ_1M
+
+#define MXS_ICOLL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x000000)
+#define MXS_APBH_DMA_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x004000)
+#define MXS_BCH_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x00a000)
+#define MXS_GPMI_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x00c000)
+#define MXS_PINCTRL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x018000)
+#define MXS_DIGCTL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x01c000)
+#define MXS_APBX_DMA_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x024000)
+#define MXS_DCP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x028000)
+#define MXS_PXP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02a000)
+#define MXS_OCOTP_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02c000)
+#define MXS_AXI_AHB0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x02e000)
+#define MXS_LCDIF_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x030000)
+#define MXS_CLKCTRL_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x040000)
+#define MXS_SAIF0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x042000)
+#define MXS_POWER_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x044000)
+#define MXS_SAIF1_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x046000)
+#define MXS_LRADC_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x050000)
+#define MXS_SPDIF_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x054000)
+#define MXS_I2C0_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x058000)
+#define MXS_PWM_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x064000)
+#define MXS_TIMROT_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x068000)
+#define MXS_AUART1_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x06c000)
+#define MXS_AUART2_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x06e000)
+#define MXS_DRAM_BASE_ADDR		(MXS_IO_BASE_ADDR + 0x0e0000)
+
+/*
+ * It maps the whole address space to [0xf4000000, 0xf50fffff].
+ *
+ *	OCRAM	0x00000000+0x020000	->	0xf4000000+0x020000
+ *	IO	0x80000000+0x100000	->	0xf5000000+0x100000
+ */
+#define MXS_IO_P2V(x)	(0xf4000000 +					\
+			(((x) & 0x80000000) >> 7) +			\
+			(((x) & 0x000fffff)))
+
+#define MXS_IO_ADDRESS(x)	IOMEM(MXS_IO_P2V(x))
+
+#define mxs_map_entry(soc, name, _type)	{				\
+	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
+	.pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR),		\
+	.length = soc ## _ ## name ## _SIZE,				\
+	.type = _type,							\
+}
+
+#define MXS_SET_ADDR		0x4
+#define MXS_CLR_ADDR		0x8
+#define MXS_TOG_ADDR		0xc
+
+#ifndef __ASSEMBLER__
+static inline void __mxs_setl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_SET_ADDR);
+}
+
+static inline void __mxs_clrl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_CLR_ADDR);
+}
+
+static inline void __mxs_togl(u32 mask, void __iomem *reg)
+{
+	__raw_writel(mask, reg + MXS_TOG_ADDR);
+}
+#endif
+
+#endif /* __MACH_MXS_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
new file mode 100644
index 00000000000..0e428239b43
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_MXS_SYSTEM_H__
+#define __MACH_MXS_SYSTEM_H__
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+void arch_reset(char mode, const char *cmd);
+
+#endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/timex.h b/arch/arm/mach-mxs/include/mach/timex.h
new file mode 100644
index 00000000000..734ce8984a6
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/timex.h
@@ -0,0 +1,21 @@
+/*
+ *  Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_MXS_TIMEX_H__
+#define __MACH_MXS_TIMEX_H__
+
+#define CLOCK_TICK_RATE		32000	/* 32K */
+
+#endif /* __MACH_MXS_TIMEX_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
new file mode 100644
index 00000000000..a005e76f34f
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ *  arch/arm/mach-mxs/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *  Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_MXS_UNCOMPRESS_H__
+#define __MACH_MXS_UNCOMPRESS_H__
+
+#include <asm/mach-types.h>
+
+static unsigned long mxs_duart_base;
+
+#define MXS_DUART(x)	(*(volatile unsigned long *)(mxs_duart_base + (x)))
+
+#define MXS_DUART_DR		0x00
+#define MXS_DUART_FR		0x18
+#define MXS_DUART_FR_TXFE	(1 << 7)
+#define MXS_DUART_CR		0x30
+#define MXS_DUART_CR_UARTEN	(1 << 0)
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader. If it's not, the output is
+ * simply discarded.
+ */
+
+static void putc(int ch)
+{
+	if (!mxs_duart_base)
+		return;
+	if (!(MXS_DUART(MXS_DUART_CR) & MXS_DUART_CR_UARTEN))
+		return;
+
+	while (!(MXS_DUART(MXS_DUART_FR) & MXS_DUART_FR_TXFE))
+		barrier();
+
+	MXS_DUART(MXS_DUART_DR) = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+#define MX23_DUART_BASE_ADDR	0x80070000
+#define MX28_DUART_BASE_ADDR	0x80074000
+
+static inline void __arch_decomp_setup(unsigned long arch_id)
+{
+	switch (arch_id) {
+	case MACH_TYPE_MX23EVK:
+		mxs_duart_base = MX23_DUART_BASE_ADDR;
+		break;
+	case MACH_TYPE_MX28EVK:
+		mxs_duart_base = MX28_DUART_BASE_ADDR;
+		break;
+	default:
+		break;
+	}
+}
+
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
+
+#endif /* __MACH_MXS_UNCOMPRESS_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/vmalloc.h b/arch/arm/mach-mxs/include/mach/vmalloc.h
new file mode 100644
index 00000000000..103b0165ed0
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/*
+ *  Copyright (C) 2000 Russell King.
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_MXS_VMALLOC_H__
+#define __MACH_MXS_VMALLOC_H__
+
+/* vmalloc ending address */
+#define VMALLOC_END       0xf4000000UL
+
+#endif /* __MACH_MXS_VMALLOC_H__ */
diff --git a/arch/arm/mach-mxs/iomux.c b/arch/arm/mach-mxs/iomux.c
new file mode 100644
index 00000000000..0e804e2f11f
--- /dev/null
+++ b/arch/arm/mach-mxs/iomux.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ *                       <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/mxs.h>
+#include <mach/iomux.h>
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad)
+{
+	u32 reg, ofs, bp, bm;
+	void __iomem *iomux_base = MXS_IO_ADDRESS(MXS_PINCTRL_BASE_ADDR);
+
+	/* muxsel */
+	ofs = 0x100;
+	ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
+	bp = PAD_PIN(pad) % 16 * 2;
+	bm = 0x3 << bp;
+	reg = __raw_readl(iomux_base + ofs);
+	reg &= ~bm;
+	reg |= PAD_MUXSEL(pad) << bp;
+	__raw_writel(reg, iomux_base + ofs);
+
+	/* drive */
+	ofs = cpu_is_mx23() ? 0x200 : 0x300;
+	ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
+	/* mA */
+	if (PAD_MA_VALID(pad)) {
+		bp = PAD_PIN(pad) % 8 * 4;
+		bm = 0x3 << bp;
+		reg = __raw_readl(iomux_base + ofs);
+		reg &= ~bm;
+		reg |= PAD_MA(pad) << bp;
+		__raw_writel(reg, iomux_base + ofs);
+	}
+	/* vol */
+	if (PAD_VOL_VALID(pad)) {
+		bp = PAD_PIN(pad) % 8 * 4 + 2;
+		if (PAD_VOL(pad))
+			__mxs_setl(1 << bp, iomux_base + ofs);
+		else
+			__mxs_clrl(1 << bp, iomux_base + ofs);
+	}
+
+	/* pull */
+	if (PAD_PULL_VALID(pad)) {
+		ofs = cpu_is_mx23() ? 0x400 : 0x600;
+		ofs += PAD_BANK(pad) * 0x10;
+		bp = PAD_PIN(pad);
+		if (PAD_PULL(pad))
+			__mxs_setl(1 << bp, iomux_base + ofs);
+		else
+			__mxs_clrl(1 << bp, iomux_base + ofs);
+	}
+
+	return 0;
+}
+
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
+{
+	const iomux_cfg_t *p = pad_list;
+	int i;
+	int ret;
+
+	for (i = 0; i < count; i++) {
+		ret = mxs_iomux_setup_pad(*p);
+		if (ret)
+			return ret;
+		p++;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
new file mode 100644
index 00000000000..aa0640052f5
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -0,0 +1,57 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx23.h>
+
+#include "devices-mx23.h"
+
+static const iomux_cfg_t mx23evk_pads[] __initconst = {
+	/* duart */
+	MX23_PAD_PWM0__DUART_RX | MXS_PAD_4MA,
+	MX23_PAD_PWM1__DUART_TX | MXS_PAD_4MA,
+};
+
+static void __init mx23evk_init(void)
+{
+	mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
+
+	mx23_add_duart();
+}
+
+static void __init mx23evk_timer_init(void)
+{
+	mx23_clocks_init();
+}
+
+static struct sys_timer mx23evk_timer = {
+	.init	= mx23evk_timer_init,
+};
+
+MACHINE_START(MX23EVK, "Freescale MX23 EVK")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.map_io		= mx23_map_io,
+	.init_irq	= mx23_init_irq,
+	.init_machine	= mx23evk_init,
+	.timer		= &mx23evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
new file mode 100644
index 00000000000..d162e95910f
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+#include "gpio.h"
+
+#define MX28EVK_FEC_PHY_POWER	MXS_GPIO_NR(2, 15)
+#define MX28EVK_FEC_PHY_RESET	MXS_GPIO_NR(4, 13)
+
+static const iomux_cfg_t mx28evk_pads[] __initconst = {
+	/* duart */
+	MX28_PAD_PWM0__DUART_RX |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_PWM1__DUART_TX |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+	/* fec0 */
+	MX28_PAD_ENET0_MDC__ENET0_MDC |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_ENET0_MDIO__ENET0_MDIO |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_ENET0_RXD0__ENET0_RXD0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_ENET0_RXD1__ENET0_RXD1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_ENET0_TXD0__ENET0_TXD0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_ENET0_TXD1__ENET0_TXD1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_ENET_CLK__CLKCTRL_ENET |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	/* phy power line */
+	MX28_PAD_SSP1_DATA3__GPIO_2_15 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* phy reset line */
+	MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+};
+
+/* fec */
+static void __init mx28evk_fec_reset(void)
+{
+	int ret;
+	struct clk *clk;
+
+	/* Enable fec phy clock */
+	clk = clk_get_sys("pll2", NULL);
+	if (!IS_ERR(clk))
+		clk_enable(clk);
+
+	/* Power up fec phy */
+	ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power");
+	if (ret) {
+		pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret);
+		return;
+	}
+
+	ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0);
+	if (ret) {
+		pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret);
+		return;
+	}
+
+	/* Reset fec phy */
+	ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset");
+	if (ret) {
+		pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret);
+		return;
+	}
+
+	gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0);
+	if (ret) {
+		pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret);
+		return;
+	}
+
+	mdelay(1);
+	gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
+}
+
+static const struct fec_platform_data mx28_fec_pdata __initconst = {
+	.phy = PHY_INTERFACE_MODE_RMII,
+};
+
+static void __init mx28evk_init(void)
+{
+	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
+
+	mx28_add_duart();
+
+	mx28evk_fec_reset();
+	mx28_add_fec(0, &mx28_fec_pdata);
+}
+
+static void __init mx28evk_timer_init(void)
+{
+	mx28_clocks_init();
+}
+
+static struct sys_timer mx28evk_timer = {
+	.init	= mx28evk_timer_init,
+};
+
+MACHINE_START(MX28EVK, "Freescale MX28 EVK")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.map_io		= mx28_map_io,
+	.init_irq	= mx28_init_irq,
+	.init_machine	= mx28evk_init,
+	.timer		= &mx28evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c
new file mode 100644
index 00000000000..5148cd64a6b
--- /dev/null
+++ b/arch/arm/mach-mxs/mm-mx23.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License.  You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/mx23.h>
+#include <mach/common.h>
+#include <mach/iomux.h>
+
+/*
+ * Define the MX23 memory map.
+ */
+static struct map_desc mx23_io_desc[] __initdata = {
+	mxs_map_entry(MX23, OCRAM, MT_DEVICE),
+	mxs_map_entry(MX23, IO, MT_DEVICE),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx23_map_io(void)
+{
+	iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
+}
+
+void __init mx23_init_irq(void)
+{
+	icoll_init_irq();
+	mx23_register_gpios();
+}
diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c
new file mode 100644
index 00000000000..7e4cea32ebc
--- /dev/null
+++ b/arch/arm/mach-mxs/mm-mx28.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License.  You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * Create static mapping between physical to virtual memory.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/mx28.h>
+#include <mach/common.h>
+#include <mach/iomux.h>
+
+/*
+ * Define the MX28 memory map.
+ */
+static struct map_desc mx28_io_desc[] __initdata = {
+	mxs_map_entry(MX28, OCRAM, MT_DEVICE),
+	mxs_map_entry(MX28, IO, MT_DEVICE),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx28_map_io(void)
+{
+	iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
+}
+
+void __init mx28_init_irq(void)
+{
+	icoll_init_irq();
+	mx28_register_gpios();
+}
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx23.h b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
new file mode 100644
index 00000000000..dbc04747b69
--- /dev/null
+++ b/arch/arm/mach-mxs/regs-clkctrl-mx23.h
@@ -0,0 +1,455 @@
+/*
+ * Freescale CLKCTRL Register Definitions
+ *
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file is created by xml file. Don't Edit it.
+ *
+ * Xml Revision: 1.48
+ * Template revision: 26195
+ */
+
+#ifndef __REGS_CLKCTRL_MX23_H__
+#define __REGS_CLKCTRL_MX23_H__
+
+
+#define HW_CLKCTRL_PLLCTRL0	(0x00000000)
+#define HW_CLKCTRL_PLLCTRL0_SET	(0x00000004)
+#define HW_CLKCTRL_PLLCTRL0_CLR	(0x00000008)
+#define HW_CLKCTRL_PLLCTRL0_TOG	(0x0000000c)
+
+#define BP_CLKCTRL_PLLCTRL0_RSRVD6	30
+#define BM_CLKCTRL_PLLCTRL0_RSRVD6	0xC0000000
+#define BF_CLKCTRL_PLLCTRL0_RSRVD6(v) \
+		(((v) << 30) & BM_CLKCTRL_PLLCTRL0_RSRVD6)
+#define BP_CLKCTRL_PLLCTRL0_LFR_SEL	28
+#define BM_CLKCTRL_PLLCTRL0_LFR_SEL	0x30000000
+#define BF_CLKCTRL_PLLCTRL0_LFR_SEL(v)  \
+		(((v) << 28) & BM_CLKCTRL_PLLCTRL0_LFR_SEL)
+#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__DEFAULT   0x0
+#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_2   0x1
+#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__TIMES_05  0x2
+#define BV_CLKCTRL_PLLCTRL0_LFR_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLLCTRL0_RSRVD5	26
+#define BM_CLKCTRL_PLLCTRL0_RSRVD5	0x0C000000
+#define BF_CLKCTRL_PLLCTRL0_RSRVD5(v)  \
+		(((v) << 26) & BM_CLKCTRL_PLLCTRL0_RSRVD5)
+#define BP_CLKCTRL_PLLCTRL0_CP_SEL	24
+#define BM_CLKCTRL_PLLCTRL0_CP_SEL	0x03000000
+#define BF_CLKCTRL_PLLCTRL0_CP_SEL(v)  \
+		(((v) << 24) & BM_CLKCTRL_PLLCTRL0_CP_SEL)
+#define BV_CLKCTRL_PLLCTRL0_CP_SEL__DEFAULT   0x0
+#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_2   0x1
+#define BV_CLKCTRL_PLLCTRL0_CP_SEL__TIMES_05  0x2
+#define BV_CLKCTRL_PLLCTRL0_CP_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLLCTRL0_RSRVD4	22
+#define BM_CLKCTRL_PLLCTRL0_RSRVD4	0x00C00000
+#define BF_CLKCTRL_PLLCTRL0_RSRVD4(v)  \
+		(((v) << 22) & BM_CLKCTRL_PLLCTRL0_RSRVD4)
+#define BP_CLKCTRL_PLLCTRL0_DIV_SEL	20
+#define BM_CLKCTRL_PLLCTRL0_DIV_SEL	0x00300000
+#define BF_CLKCTRL_PLLCTRL0_DIV_SEL(v)  \
+		(((v) << 20) & BM_CLKCTRL_PLLCTRL0_DIV_SEL)
+#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__DEFAULT   0x0
+#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWER     0x1
+#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__LOWEST    0x2
+#define BV_CLKCTRL_PLLCTRL0_DIV_SEL__UNDEFINED 0x3
+#define BM_CLKCTRL_PLLCTRL0_RSRVD3	0x00080000
+#define BM_CLKCTRL_PLLCTRL0_EN_USB_CLKS	0x00040000
+#define BM_CLKCTRL_PLLCTRL0_RSRVD2	0x00020000
+#define BM_CLKCTRL_PLLCTRL0_POWER	0x00010000
+#define BP_CLKCTRL_PLLCTRL0_RSRVD1	0
+#define BM_CLKCTRL_PLLCTRL0_RSRVD1	0x0000FFFF
+#define BF_CLKCTRL_PLLCTRL0_RSRVD1(v)  \
+		(((v) << 0) & BM_CLKCTRL_PLLCTRL0_RSRVD1)
+
+#define HW_CLKCTRL_PLLCTRL1	(0x00000010)
+
+#define BM_CLKCTRL_PLLCTRL1_LOCK	0x80000000
+#define BM_CLKCTRL_PLLCTRL1_FORCE_LOCK	0x40000000
+#define BP_CLKCTRL_PLLCTRL1_RSRVD1	16
+#define BM_CLKCTRL_PLLCTRL1_RSRVD1	0x3FFF0000
+#define BF_CLKCTRL_PLLCTRL1_RSRVD1(v)  \
+		(((v) << 16) & BM_CLKCTRL_PLLCTRL1_RSRVD1)
+#define BP_CLKCTRL_PLLCTRL1_LOCK_COUNT	0
+#define BM_CLKCTRL_PLLCTRL1_LOCK_COUNT	0x0000FFFF
+#define BF_CLKCTRL_PLLCTRL1_LOCK_COUNT(v)  \
+		(((v) << 0) & BM_CLKCTRL_PLLCTRL1_LOCK_COUNT)
+
+#define HW_CLKCTRL_CPU	(0x00000020)
+#define HW_CLKCTRL_CPU_SET	(0x00000024)
+#define HW_CLKCTRL_CPU_CLR	(0x00000028)
+#define HW_CLKCTRL_CPU_TOG	(0x0000002c)
+
+#define BP_CLKCTRL_CPU_RSRVD5	30
+#define BM_CLKCTRL_CPU_RSRVD5	0xC0000000
+#define BF_CLKCTRL_CPU_RSRVD5(v) \
+		(((v) << 30) & BM_CLKCTRL_CPU_RSRVD5)
+#define BM_CLKCTRL_CPU_BUSY_REF_XTAL	0x20000000
+#define BM_CLKCTRL_CPU_BUSY_REF_CPU	0x10000000
+#define BM_CLKCTRL_CPU_RSRVD4	0x08000000
+#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN	0x04000000
+#define BP_CLKCTRL_CPU_DIV_XTAL	16
+#define BM_CLKCTRL_CPU_DIV_XTAL	0x03FF0000
+#define BF_CLKCTRL_CPU_DIV_XTAL(v)  \
+		(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
+#define BP_CLKCTRL_CPU_RSRVD3	13
+#define BM_CLKCTRL_CPU_RSRVD3	0x0000E000
+#define BF_CLKCTRL_CPU_RSRVD3(v)  \
+		(((v) << 13) & BM_CLKCTRL_CPU_RSRVD3)
+#define BM_CLKCTRL_CPU_INTERRUPT_WAIT	0x00001000
+#define BM_CLKCTRL_CPU_RSRVD2	0x00000800
+#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN	0x00000400
+#define BP_CLKCTRL_CPU_RSRVD1	6
+#define BM_CLKCTRL_CPU_RSRVD1	0x000003C0
+#define BF_CLKCTRL_CPU_RSRVD1(v)  \
+		(((v) << 6) & BM_CLKCTRL_CPU_RSRVD1)
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BF_CLKCTRL_CPU_DIV_CPU(v)  \
+		(((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
+
+#define HW_CLKCTRL_HBUS	(0x00000030)
+#define HW_CLKCTRL_HBUS_SET	(0x00000034)
+#define HW_CLKCTRL_HBUS_CLR	(0x00000038)
+#define HW_CLKCTRL_HBUS_TOG	(0x0000003c)
+
+#define BP_CLKCTRL_HBUS_RSRVD4	30
+#define BM_CLKCTRL_HBUS_RSRVD4	0xC0000000
+#define BF_CLKCTRL_HBUS_RSRVD4(v) \
+		(((v) << 30) & BM_CLKCTRL_HBUS_RSRVD4)
+#define BM_CLKCTRL_HBUS_BUSY	0x20000000
+#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE	0x10000000
+#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE	0x08000000
+#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE	0x04000000
+#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE	0x02000000
+#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	0x01000000
+#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE	0x00800000
+#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE	0x00400000
+#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	0x00200000
+#define BM_CLKCTRL_HBUS_AUTO_SLOW_MODE	0x00100000
+#define BM_CLKCTRL_HBUS_RSRVD2	0x00080000
+#define BP_CLKCTRL_HBUS_SLOW_DIV	16
+#define BM_CLKCTRL_HBUS_SLOW_DIV	0x00070000
+#define BF_CLKCTRL_HBUS_SLOW_DIV(v)  \
+		(((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1  0x0
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2  0x1
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4  0x2
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8  0x3
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
+#define BP_CLKCTRL_HBUS_RSRVD1	6
+#define BM_CLKCTRL_HBUS_RSRVD1	0x0000FFC0
+#define BF_CLKCTRL_HBUS_RSRVD1(v)  \
+		(((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1)
+#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
+#define BP_CLKCTRL_HBUS_DIV	0
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BF_CLKCTRL_HBUS_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_HBUS_DIV)
+
+#define HW_CLKCTRL_XBUS	(0x00000040)
+
+#define BM_CLKCTRL_XBUS_BUSY	0x80000000
+#define BP_CLKCTRL_XBUS_RSRVD1	11
+#define BM_CLKCTRL_XBUS_RSRVD1	0x7FFFF800
+#define BF_CLKCTRL_XBUS_RSRVD1(v)  \
+		(((v) << 11) & BM_CLKCTRL_XBUS_RSRVD1)
+#define BM_CLKCTRL_XBUS_DIV_FRAC_EN	0x00000400
+#define BP_CLKCTRL_XBUS_DIV	0
+#define BM_CLKCTRL_XBUS_DIV	0x000003FF
+#define BF_CLKCTRL_XBUS_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_XBUS_DIV)
+
+#define HW_CLKCTRL_XTAL	(0x00000050)
+#define HW_CLKCTRL_XTAL_SET	(0x00000054)
+#define HW_CLKCTRL_XTAL_CLR	(0x00000058)
+#define HW_CLKCTRL_XTAL_TOG	(0x0000005c)
+
+#define BP_CLKCTRL_XTAL_UART_CLK_GATE	31
+#define BM_CLKCTRL_XTAL_UART_CLK_GATE	0x80000000
+#define BP_CLKCTRL_XTAL_FILT_CLK24M_GATE	30
+#define BM_CLKCTRL_XTAL_FILT_CLK24M_GATE	0x40000000
+#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE	29
+#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE	0x20000000
+#define BM_CLKCTRL_XTAL_DRI_CLK24M_GATE	0x10000000
+#define BM_CLKCTRL_XTAL_DIGCTRL_CLK1M_GATE	0x08000000
+#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	26
+#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	0x04000000
+#define BP_CLKCTRL_XTAL_RSRVD1	2
+#define BM_CLKCTRL_XTAL_RSRVD1	0x03FFFFFC
+#define BF_CLKCTRL_XTAL_RSRVD1(v)  \
+		(((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1)
+#define BP_CLKCTRL_XTAL_DIV_UART	0
+#define BM_CLKCTRL_XTAL_DIV_UART	0x00000003
+#define BF_CLKCTRL_XTAL_DIV_UART(v)  \
+		(((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
+
+#define HW_CLKCTRL_PIX	(0x00000060)
+
+#define BP_CLKCTRL_PIX_CLKGATE	31
+#define BM_CLKCTRL_PIX_CLKGATE	0x80000000
+#define BM_CLKCTRL_PIX_RSRVD2	0x40000000
+#define BM_CLKCTRL_PIX_BUSY	0x20000000
+#define BP_CLKCTRL_PIX_RSRVD1	13
+#define BM_CLKCTRL_PIX_RSRVD1	0x1FFFE000
+#define BF_CLKCTRL_PIX_RSRVD1(v)  \
+		(((v) << 13) & BM_CLKCTRL_PIX_RSRVD1)
+#define BM_CLKCTRL_PIX_DIV_FRAC_EN	0x00001000
+#define BP_CLKCTRL_PIX_DIV	0
+#define BM_CLKCTRL_PIX_DIV	0x00000FFF
+#define BF_CLKCTRL_PIX_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_PIX_DIV)
+
+#define HW_CLKCTRL_SSP	(0x00000070)
+
+#define BP_CLKCTRL_SSP_CLKGATE	31
+#define BM_CLKCTRL_SSP_CLKGATE	0x80000000
+#define BM_CLKCTRL_SSP_RSRVD2	0x40000000
+#define BM_CLKCTRL_SSP_BUSY	0x20000000
+#define BP_CLKCTRL_SSP_RSRVD1	10
+#define BM_CLKCTRL_SSP_RSRVD1	0x1FFFFC00
+#define BF_CLKCTRL_SSP_RSRVD1(v)  \
+		(((v) << 10) & BM_CLKCTRL_SSP_RSRVD1)
+#define BM_CLKCTRL_SSP_DIV_FRAC_EN	0x00000200
+#define BP_CLKCTRL_SSP_DIV	0
+#define BM_CLKCTRL_SSP_DIV	0x000001FF
+#define BF_CLKCTRL_SSP_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_SSP_DIV)
+
+#define HW_CLKCTRL_GPMI	(0x00000080)
+
+#define BP_CLKCTRL_GPMI_CLKGATE	31
+#define BM_CLKCTRL_GPMI_CLKGATE	0x80000000
+#define BM_CLKCTRL_GPMI_RSRVD2	0x40000000
+#define BM_CLKCTRL_GPMI_BUSY	0x20000000
+#define BP_CLKCTRL_GPMI_RSRVD1	11
+#define BM_CLKCTRL_GPMI_RSRVD1	0x1FFFF800
+#define BF_CLKCTRL_GPMI_RSRVD1(v)  \
+		(((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1)
+#define BM_CLKCTRL_GPMI_DIV_FRAC_EN	0x00000400
+#define BP_CLKCTRL_GPMI_DIV	0
+#define BM_CLKCTRL_GPMI_DIV	0x000003FF
+#define BF_CLKCTRL_GPMI_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_GPMI_DIV)
+
+#define HW_CLKCTRL_SPDIF	(0x00000090)
+
+#define BM_CLKCTRL_SPDIF_CLKGATE	0x80000000
+#define BP_CLKCTRL_SPDIF_RSRVD	0
+#define BM_CLKCTRL_SPDIF_RSRVD	0x7FFFFFFF
+#define BF_CLKCTRL_SPDIF_RSRVD(v)  \
+		(((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD)
+
+#define HW_CLKCTRL_EMI	(0x000000a0)
+
+#define BP_CLKCTRL_EMI_CLKGATE	31
+#define BM_CLKCTRL_EMI_CLKGATE	0x80000000
+#define BM_CLKCTRL_EMI_SYNC_MODE_EN	0x40000000
+#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
+#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
+#define BM_CLKCTRL_EMI_BUSY_REF_CPU	0x08000000
+#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE	0x04000000
+#define BP_CLKCTRL_EMI_RSRVD3	18
+#define BM_CLKCTRL_EMI_RSRVD3	0x03FC0000
+#define BF_CLKCTRL_EMI_RSRVD3(v)  \
+		(((v) << 18) & BM_CLKCTRL_EMI_RSRVD3)
+#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
+#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
+#define BP_CLKCTRL_EMI_RSRVD2	12
+#define BM_CLKCTRL_EMI_RSRVD2	0x0000F000
+#define BF_CLKCTRL_EMI_RSRVD2(v)  \
+		(((v) << 12) & BM_CLKCTRL_EMI_RSRVD2)
+#define BP_CLKCTRL_EMI_DIV_XTAL	8
+#define BM_CLKCTRL_EMI_DIV_XTAL	0x00000F00
+#define BF_CLKCTRL_EMI_DIV_XTAL(v)  \
+		(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
+#define BP_CLKCTRL_EMI_RSRVD1	6
+#define BM_CLKCTRL_EMI_RSRVD1	0x000000C0
+#define BF_CLKCTRL_EMI_RSRVD1(v)  \
+		(((v) << 6) & BM_CLKCTRL_EMI_RSRVD1)
+#define BP_CLKCTRL_EMI_DIV_EMI	0
+#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
+#define BF_CLKCTRL_EMI_DIV_EMI(v)  \
+		(((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
+
+#define HW_CLKCTRL_IR	(0x000000b0)
+
+#define BM_CLKCTRL_IR_CLKGATE	0x80000000
+#define BM_CLKCTRL_IR_RSRVD3	0x40000000
+#define BM_CLKCTRL_IR_AUTO_DIV	0x20000000
+#define BM_CLKCTRL_IR_IR_BUSY	0x10000000
+#define BM_CLKCTRL_IR_IROV_BUSY	0x08000000
+#define BP_CLKCTRL_IR_RSRVD2	25
+#define BM_CLKCTRL_IR_RSRVD2	0x06000000
+#define BF_CLKCTRL_IR_RSRVD2(v)  \
+		(((v) << 25) & BM_CLKCTRL_IR_RSRVD2)
+#define BP_CLKCTRL_IR_IROV_DIV	16
+#define BM_CLKCTRL_IR_IROV_DIV	0x01FF0000
+#define BF_CLKCTRL_IR_IROV_DIV(v)  \
+		(((v) << 16) & BM_CLKCTRL_IR_IROV_DIV)
+#define BP_CLKCTRL_IR_RSRVD1	10
+#define BM_CLKCTRL_IR_RSRVD1	0x0000FC00
+#define BF_CLKCTRL_IR_RSRVD1(v)  \
+		(((v) << 10) & BM_CLKCTRL_IR_RSRVD1)
+#define BP_CLKCTRL_IR_IR_DIV	0
+#define BM_CLKCTRL_IR_IR_DIV	0x000003FF
+#define BF_CLKCTRL_IR_IR_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_IR_IR_DIV)
+
+#define HW_CLKCTRL_SAIF	(0x000000c0)
+
+#define BM_CLKCTRL_SAIF_CLKGATE	0x80000000
+#define BM_CLKCTRL_SAIF_RSRVD2	0x40000000
+#define BM_CLKCTRL_SAIF_BUSY	0x20000000
+#define BP_CLKCTRL_SAIF_RSRVD1	17
+#define BM_CLKCTRL_SAIF_RSRVD1	0x1FFE0000
+#define BF_CLKCTRL_SAIF_RSRVD1(v)  \
+		(((v) << 17) & BM_CLKCTRL_SAIF_RSRVD1)
+#define BM_CLKCTRL_SAIF_DIV_FRAC_EN	0x00010000
+#define BP_CLKCTRL_SAIF_DIV	0
+#define BM_CLKCTRL_SAIF_DIV	0x0000FFFF
+#define BF_CLKCTRL_SAIF_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_SAIF_DIV)
+
+#define HW_CLKCTRL_TV	(0x000000d0)
+
+#define BM_CLKCTRL_TV_CLK_TV108M_GATE	0x80000000
+#define BM_CLKCTRL_TV_CLK_TV_GATE	0x40000000
+#define BP_CLKCTRL_TV_RSRVD	0
+#define BM_CLKCTRL_TV_RSRVD	0x3FFFFFFF
+#define BF_CLKCTRL_TV_RSRVD(v)  \
+		(((v) << 0) & BM_CLKCTRL_TV_RSRVD)
+
+#define HW_CLKCTRL_ETM	(0x000000e0)
+
+#define BM_CLKCTRL_ETM_CLKGATE	0x80000000
+#define BM_CLKCTRL_ETM_RSRVD2	0x40000000
+#define BM_CLKCTRL_ETM_BUSY	0x20000000
+#define BP_CLKCTRL_ETM_RSRVD1	7
+#define BM_CLKCTRL_ETM_RSRVD1	0x1FFFFF80
+#define BF_CLKCTRL_ETM_RSRVD1(v)  \
+		(((v) << 7) & BM_CLKCTRL_ETM_RSRVD1)
+#define BM_CLKCTRL_ETM_DIV_FRAC_EN	0x00000040
+#define BP_CLKCTRL_ETM_DIV	0
+#define BM_CLKCTRL_ETM_DIV	0x0000003F
+#define BF_CLKCTRL_ETM_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_ETM_DIV)
+
+#define HW_CLKCTRL_FRAC	(0x000000f0)
+#define HW_CLKCTRL_FRAC_SET	(0x000000f4)
+#define HW_CLKCTRL_FRAC_CLR	(0x000000f8)
+#define HW_CLKCTRL_FRAC_TOG	(0x000000fc)
+
+#define BP_CLKCTRL_FRAC_CLKGATEIO	31
+#define BM_CLKCTRL_FRAC_CLKGATEIO	0x80000000
+#define BM_CLKCTRL_FRAC_IO_STABLE	0x40000000
+#define BP_CLKCTRL_FRAC_IOFRAC	24
+#define BM_CLKCTRL_FRAC_IOFRAC	0x3F000000
+#define BF_CLKCTRL_FRAC_IOFRAC(v)  \
+		(((v) << 24) & BM_CLKCTRL_FRAC_IOFRAC)
+#define BP_CLKCTRL_FRAC_CLKGATEPIX	23
+#define BM_CLKCTRL_FRAC_CLKGATEPIX	0x00800000
+#define BM_CLKCTRL_FRAC_PIX_STABLE	0x00400000
+#define BP_CLKCTRL_FRAC_PIXFRAC	16
+#define BM_CLKCTRL_FRAC_PIXFRAC	0x003F0000
+#define BF_CLKCTRL_FRAC_PIXFRAC(v)  \
+		(((v) << 16) & BM_CLKCTRL_FRAC_PIXFRAC)
+#define BP_CLKCTRL_FRAC_CLKGATEEMI	15
+#define BM_CLKCTRL_FRAC_CLKGATEEMI	0x00008000
+#define BM_CLKCTRL_FRAC_EMI_STABLE	0x00004000
+#define BP_CLKCTRL_FRAC_EMIFRAC	8
+#define BM_CLKCTRL_FRAC_EMIFRAC	0x00003F00
+#define BF_CLKCTRL_FRAC_EMIFRAC(v)  \
+		(((v) << 8) & BM_CLKCTRL_FRAC_EMIFRAC)
+#define BP_CLKCTRL_FRAC_CLKGATECPU	7
+#define BM_CLKCTRL_FRAC_CLKGATECPU	0x00000080
+#define BM_CLKCTRL_FRAC_CPU_STABLE	0x00000040
+#define BP_CLKCTRL_FRAC_CPUFRAC	0
+#define BM_CLKCTRL_FRAC_CPUFRAC	0x0000003F
+#define BF_CLKCTRL_FRAC_CPUFRAC(v)  \
+		(((v) << 0) & BM_CLKCTRL_FRAC_CPUFRAC)
+
+#define HW_CLKCTRL_FRAC1	(0x00000100)
+#define HW_CLKCTRL_FRAC1_SET	(0x00000104)
+#define HW_CLKCTRL_FRAC1_CLR	(0x00000108)
+#define HW_CLKCTRL_FRAC1_TOG	(0x0000010c)
+
+#define BM_CLKCTRL_FRAC1_CLKGATEVID	0x80000000
+#define BM_CLKCTRL_FRAC1_VID_STABLE	0x40000000
+#define BP_CLKCTRL_FRAC1_RSRVD1	0
+#define BM_CLKCTRL_FRAC1_RSRVD1	0x3FFFFFFF
+#define BF_CLKCTRL_FRAC1_RSRVD1(v)  \
+		(((v) << 0) & BM_CLKCTRL_FRAC1_RSRVD1)
+
+#define HW_CLKCTRL_CLKSEQ	(0x00000110)
+#define HW_CLKCTRL_CLKSEQ_SET	(0x00000114)
+#define HW_CLKCTRL_CLKSEQ_CLR	(0x00000118)
+#define HW_CLKCTRL_CLKSEQ_TOG	(0x0000011c)
+
+#define BP_CLKCTRL_CLKSEQ_RSRVD1	9
+#define BM_CLKCTRL_CLKSEQ_RSRVD1	0xFFFFFE00
+#define BF_CLKCTRL_CLKSEQ_RSRVD1(v) \
+		(((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD1)
+#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM	0x00000100
+#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU	0x00000080
+#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI	0x00000040
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP	0x00000020
+#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI	0x00000010
+#define BM_CLKCTRL_CLKSEQ_BYPASS_IR	0x00000008
+#define BM_CLKCTRL_CLKSEQ_RSRVD0	0x00000004
+#define BM_CLKCTRL_CLKSEQ_BYPASS_PIX	0x00000002
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF	0x00000001
+
+#define HW_CLKCTRL_RESET	(0x00000120)
+
+#define BP_CLKCTRL_RESET_RSRVD	2
+#define BM_CLKCTRL_RESET_RSRVD	0xFFFFFFFC
+#define BF_CLKCTRL_RESET_RSRVD(v) \
+		(((v) << 2) & BM_CLKCTRL_RESET_RSRVD)
+#define BM_CLKCTRL_RESET_CHIP	0x00000002
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+
+#define HW_CLKCTRL_STATUS	(0x00000130)
+
+#define BP_CLKCTRL_STATUS_CPU_LIMIT	30
+#define BM_CLKCTRL_STATUS_CPU_LIMIT	0xC0000000
+#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
+		(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
+#define BP_CLKCTRL_STATUS_RSRVD	0
+#define BM_CLKCTRL_STATUS_RSRVD	0x3FFFFFFF
+#define BF_CLKCTRL_STATUS_RSRVD(v)  \
+		(((v) << 0) & BM_CLKCTRL_STATUS_RSRVD)
+
+#define HW_CLKCTRL_VERSION	(0x00000140)
+
+#define BP_CLKCTRL_VERSION_MAJOR	24
+#define BM_CLKCTRL_VERSION_MAJOR	0xFF000000
+#define BF_CLKCTRL_VERSION_MAJOR(v) \
+		(((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
+#define BP_CLKCTRL_VERSION_MINOR	16
+#define BM_CLKCTRL_VERSION_MINOR	0x00FF0000
+#define BF_CLKCTRL_VERSION_MINOR(v)  \
+		(((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
+#define BP_CLKCTRL_VERSION_STEP	0
+#define BM_CLKCTRL_VERSION_STEP	0x0000FFFF
+#define BF_CLKCTRL_VERSION_STEP(v)  \
+		(((v) << 0) & BM_CLKCTRL_VERSION_STEP)
+
+#endif /* __REGS_CLKCTRL_MX23_H__ */
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
new file mode 100644
index 00000000000..661df18755f
--- /dev/null
+++ b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
@@ -0,0 +1,663 @@
+/*
+ * Freescale CLKCTRL Register Definitions
+ *
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file is created by xml file. Don't Edit it.
+ *
+ * Xml Revision: 1.48
+ * Template revision: 26195
+ */
+
+#ifndef __REGS_CLKCTRL_MX28_H__
+#define __REGS_CLKCTRL_MX28_H__
+
+#define HW_CLKCTRL_PLL0CTRL0	(0x00000000)
+#define HW_CLKCTRL_PLL0CTRL0_SET	(0x00000004)
+#define HW_CLKCTRL_PLL0CTRL0_CLR	(0x00000008)
+#define HW_CLKCTRL_PLL0CTRL0_TOG	(0x0000000c)
+
+#define BP_CLKCTRL_PLL0CTRL0_RSRVD6	30
+#define BM_CLKCTRL_PLL0CTRL0_RSRVD6	0xC0000000
+#define BF_CLKCTRL_PLL0CTRL0_RSRVD6(v) \
+		(((v) << 30) & BM_CLKCTRL_PLL0CTRL0_RSRVD6)
+#define BP_CLKCTRL_PLL0CTRL0_LFR_SEL	28
+#define BM_CLKCTRL_PLL0CTRL0_LFR_SEL	0x30000000
+#define BF_CLKCTRL_PLL0CTRL0_LFR_SEL(v)  \
+		(((v) << 28) & BM_CLKCTRL_PLL0CTRL0_LFR_SEL)
+#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__DEFAULT   0x0
+#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_2   0x1
+#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__TIMES_05  0x2
+#define BV_CLKCTRL_PLL0CTRL0_LFR_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLL0CTRL0_RSRVD5	26
+#define BM_CLKCTRL_PLL0CTRL0_RSRVD5	0x0C000000
+#define BF_CLKCTRL_PLL0CTRL0_RSRVD5(v)  \
+		(((v) << 26) & BM_CLKCTRL_PLL0CTRL0_RSRVD5)
+#define BP_CLKCTRL_PLL0CTRL0_CP_SEL	24
+#define BM_CLKCTRL_PLL0CTRL0_CP_SEL	0x03000000
+#define BF_CLKCTRL_PLL0CTRL0_CP_SEL(v)  \
+		(((v) << 24) & BM_CLKCTRL_PLL0CTRL0_CP_SEL)
+#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__DEFAULT   0x0
+#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_2   0x1
+#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__TIMES_05  0x2
+#define BV_CLKCTRL_PLL0CTRL0_CP_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLL0CTRL0_RSRVD4	22
+#define BM_CLKCTRL_PLL0CTRL0_RSRVD4	0x00C00000
+#define BF_CLKCTRL_PLL0CTRL0_RSRVD4(v)  \
+		(((v) << 22) & BM_CLKCTRL_PLL0CTRL0_RSRVD4)
+#define BP_CLKCTRL_PLL0CTRL0_DIV_SEL	20
+#define BM_CLKCTRL_PLL0CTRL0_DIV_SEL	0x00300000
+#define BF_CLKCTRL_PLL0CTRL0_DIV_SEL(v)  \
+		(((v) << 20) & BM_CLKCTRL_PLL0CTRL0_DIV_SEL)
+#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__DEFAULT   0x0
+#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWER     0x1
+#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__LOWEST    0x2
+#define BV_CLKCTRL_PLL0CTRL0_DIV_SEL__UNDEFINED 0x3
+#define BM_CLKCTRL_PLL0CTRL0_RSRVD3	0x00080000
+#define BM_CLKCTRL_PLL0CTRL0_EN_USB_CLKS	0x00040000
+#define BM_CLKCTRL_PLL0CTRL0_POWER	0x00020000
+#define BP_CLKCTRL_PLL0CTRL0_RSRVD1	0
+#define BM_CLKCTRL_PLL0CTRL0_RSRVD1	0x0001FFFF
+#define BF_CLKCTRL_PLL0CTRL0_RSRVD1(v)  \
+		(((v) << 0) & BM_CLKCTRL_PLL0CTRL0_RSRVD1)
+
+#define HW_CLKCTRL_PLL0CTRL1	(0x00000010)
+
+#define BM_CLKCTRL_PLL0CTRL1_LOCK	0x80000000
+#define BM_CLKCTRL_PLL0CTRL1_FORCE_LOCK	0x40000000
+#define BP_CLKCTRL_PLL0CTRL1_RSRVD1	16
+#define BM_CLKCTRL_PLL0CTRL1_RSRVD1	0x3FFF0000
+#define BF_CLKCTRL_PLL0CTRL1_RSRVD1(v)  \
+		(((v) << 16) & BM_CLKCTRL_PLL0CTRL1_RSRVD1)
+#define BP_CLKCTRL_PLL0CTRL1_LOCK_COUNT	0
+#define BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT	0x0000FFFF
+#define BF_CLKCTRL_PLL0CTRL1_LOCK_COUNT(v)  \
+		(((v) << 0) & BM_CLKCTRL_PLL0CTRL1_LOCK_COUNT)
+
+#define HW_CLKCTRL_PLL1CTRL0	(0x00000020)
+#define HW_CLKCTRL_PLL1CTRL0_SET	(0x00000024)
+#define HW_CLKCTRL_PLL1CTRL0_CLR	(0x00000028)
+#define HW_CLKCTRL_PLL1CTRL0_TOG	(0x0000002c)
+
+#define BM_CLKCTRL_PLL1CTRL0_CLKGATEEMI	0x80000000
+#define BM_CLKCTRL_PLL1CTRL0_RSRVD6	0x40000000
+#define BP_CLKCTRL_PLL1CTRL0_LFR_SEL	28
+#define BM_CLKCTRL_PLL1CTRL0_LFR_SEL	0x30000000
+#define BF_CLKCTRL_PLL1CTRL0_LFR_SEL(v)  \
+		(((v) << 28) & BM_CLKCTRL_PLL1CTRL0_LFR_SEL)
+#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__DEFAULT   0x0
+#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_2   0x1
+#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__TIMES_05  0x2
+#define BV_CLKCTRL_PLL1CTRL0_LFR_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLL1CTRL0_RSRVD5	26
+#define BM_CLKCTRL_PLL1CTRL0_RSRVD5	0x0C000000
+#define BF_CLKCTRL_PLL1CTRL0_RSRVD5(v)  \
+		(((v) << 26) & BM_CLKCTRL_PLL1CTRL0_RSRVD5)
+#define BP_CLKCTRL_PLL1CTRL0_CP_SEL	24
+#define BM_CLKCTRL_PLL1CTRL0_CP_SEL	0x03000000
+#define BF_CLKCTRL_PLL1CTRL0_CP_SEL(v)  \
+		(((v) << 24) & BM_CLKCTRL_PLL1CTRL0_CP_SEL)
+#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__DEFAULT   0x0
+#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_2   0x1
+#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__TIMES_05  0x2
+#define BV_CLKCTRL_PLL1CTRL0_CP_SEL__UNDEFINED 0x3
+#define BP_CLKCTRL_PLL1CTRL0_RSRVD4	22
+#define BM_CLKCTRL_PLL1CTRL0_RSRVD4	0x00C00000
+#define BF_CLKCTRL_PLL1CTRL0_RSRVD4(v)  \
+		(((v) << 22) & BM_CLKCTRL_PLL1CTRL0_RSRVD4)
+#define BP_CLKCTRL_PLL1CTRL0_DIV_SEL	20
+#define BM_CLKCTRL_PLL1CTRL0_DIV_SEL	0x00300000
+#define BF_CLKCTRL_PLL1CTRL0_DIV_SEL(v)  \
+		(((v) << 20) & BM_CLKCTRL_PLL1CTRL0_DIV_SEL)
+#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__DEFAULT   0x0
+#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWER     0x1
+#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__LOWEST    0x2
+#define BV_CLKCTRL_PLL1CTRL0_DIV_SEL__UNDEFINED 0x3
+#define BM_CLKCTRL_PLL1CTRL0_RSRVD3	0x00080000
+#define BM_CLKCTRL_PLL1CTRL0_EN_USB_CLKS	0x00040000
+#define BM_CLKCTRL_PLL1CTRL0_POWER	0x00020000
+#define BP_CLKCTRL_PLL1CTRL0_RSRVD1	0
+#define BM_CLKCTRL_PLL1CTRL0_RSRVD1	0x0001FFFF
+#define BF_CLKCTRL_PLL1CTRL0_RSRVD1(v)  \
+		(((v) << 0) & BM_CLKCTRL_PLL1CTRL0_RSRVD1)
+
+#define HW_CLKCTRL_PLL1CTRL1	(0x00000030)
+
+#define BM_CLKCTRL_PLL1CTRL1_LOCK	0x80000000
+#define BM_CLKCTRL_PLL1CTRL1_FORCE_LOCK	0x40000000
+#define BP_CLKCTRL_PLL1CTRL1_RSRVD1	16
+#define BM_CLKCTRL_PLL1CTRL1_RSRVD1	0x3FFF0000
+#define BF_CLKCTRL_PLL1CTRL1_RSRVD1(v)  \
+		(((v) << 16) & BM_CLKCTRL_PLL1CTRL1_RSRVD1)
+#define BP_CLKCTRL_PLL1CTRL1_LOCK_COUNT	0
+#define BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT	0x0000FFFF
+#define BF_CLKCTRL_PLL1CTRL1_LOCK_COUNT(v)  \
+		(((v) << 0) & BM_CLKCTRL_PLL1CTRL1_LOCK_COUNT)
+
+#define HW_CLKCTRL_PLL2CTRL0	(0x00000040)
+#define HW_CLKCTRL_PLL2CTRL0_SET	(0x00000044)
+#define HW_CLKCTRL_PLL2CTRL0_CLR	(0x00000048)
+#define HW_CLKCTRL_PLL2CTRL0_TOG	(0x0000004c)
+
+#define BM_CLKCTRL_PLL2CTRL0_CLKGATE	0x80000000
+#define BM_CLKCTRL_PLL2CTRL0_RSRVD3	0x40000000
+#define BP_CLKCTRL_PLL2CTRL0_LFR_SEL	28
+#define BM_CLKCTRL_PLL2CTRL0_LFR_SEL	0x30000000
+#define BF_CLKCTRL_PLL2CTRL0_LFR_SEL(v)  \
+		(((v) << 28) & BM_CLKCTRL_PLL2CTRL0_LFR_SEL)
+#define BM_CLKCTRL_PLL2CTRL0_RSRVD2	0x08000000
+#define BM_CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B	0x04000000
+#define BP_CLKCTRL_PLL2CTRL0_CP_SEL	24
+#define BM_CLKCTRL_PLL2CTRL0_CP_SEL	0x03000000
+#define BF_CLKCTRL_PLL2CTRL0_CP_SEL(v)  \
+		(((v) << 24) & BM_CLKCTRL_PLL2CTRL0_CP_SEL)
+#define BM_CLKCTRL_PLL2CTRL0_POWER	0x00800000
+#define BP_CLKCTRL_PLL2CTRL0_RSRVD1	0
+#define BM_CLKCTRL_PLL2CTRL0_RSRVD1	0x007FFFFF
+#define BF_CLKCTRL_PLL2CTRL0_RSRVD1(v)  \
+		(((v) << 0) & BM_CLKCTRL_PLL2CTRL0_RSRVD1)
+
+#define HW_CLKCTRL_CPU	(0x00000050)
+#define HW_CLKCTRL_CPU_SET	(0x00000054)
+#define HW_CLKCTRL_CPU_CLR	(0x00000058)
+#define HW_CLKCTRL_CPU_TOG	(0x0000005c)
+
+#define BP_CLKCTRL_CPU_RSRVD5	30
+#define BM_CLKCTRL_CPU_RSRVD5	0xC0000000
+#define BF_CLKCTRL_CPU_RSRVD5(v) \
+		(((v) << 30) & BM_CLKCTRL_CPU_RSRVD5)
+#define BM_CLKCTRL_CPU_BUSY_REF_XTAL	0x20000000
+#define BM_CLKCTRL_CPU_BUSY_REF_CPU	0x10000000
+#define BM_CLKCTRL_CPU_RSRVD4	0x08000000
+#define BM_CLKCTRL_CPU_DIV_XTAL_FRAC_EN	0x04000000
+#define BP_CLKCTRL_CPU_DIV_XTAL	16
+#define BM_CLKCTRL_CPU_DIV_XTAL	0x03FF0000
+#define BF_CLKCTRL_CPU_DIV_XTAL(v)  \
+		(((v) << 16) & BM_CLKCTRL_CPU_DIV_XTAL)
+#define BP_CLKCTRL_CPU_RSRVD3	13
+#define BM_CLKCTRL_CPU_RSRVD3	0x0000E000
+#define BF_CLKCTRL_CPU_RSRVD3(v)  \
+		(((v) << 13) & BM_CLKCTRL_CPU_RSRVD3)
+#define BM_CLKCTRL_CPU_INTERRUPT_WAIT	0x00001000
+#define BM_CLKCTRL_CPU_RSRVD2	0x00000800
+#define BM_CLKCTRL_CPU_DIV_CPU_FRAC_EN	0x00000400
+#define BP_CLKCTRL_CPU_RSRVD1	6
+#define BM_CLKCTRL_CPU_RSRVD1	0x000003C0
+#define BF_CLKCTRL_CPU_RSRVD1(v)  \
+		(((v) << 6) & BM_CLKCTRL_CPU_RSRVD1)
+#define BP_CLKCTRL_CPU_DIV_CPU	0
+#define BM_CLKCTRL_CPU_DIV_CPU	0x0000003F
+#define BF_CLKCTRL_CPU_DIV_CPU(v)  \
+		(((v) << 0) & BM_CLKCTRL_CPU_DIV_CPU)
+
+#define HW_CLKCTRL_HBUS	(0x00000060)
+#define HW_CLKCTRL_HBUS_SET	(0x00000064)
+#define HW_CLKCTRL_HBUS_CLR	(0x00000068)
+#define HW_CLKCTRL_HBUS_TOG	(0x0000006c)
+
+#define BM_CLKCTRL_HBUS_ASM_BUSY	0x80000000
+#define BM_CLKCTRL_HBUS_DCP_AS_ENABLE	0x40000000
+#define BM_CLKCTRL_HBUS_PXP_AS_ENABLE	0x20000000
+#define BM_CLKCTRL_HBUS_RSRVD2	0x10000000
+#define BM_CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE	0x08000000
+#define BM_CLKCTRL_HBUS_APBHDMA_AS_ENABLE	0x04000000
+#define BM_CLKCTRL_HBUS_APBXDMA_AS_ENABLE	0x02000000
+#define BM_CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE	0x01000000
+#define BM_CLKCTRL_HBUS_TRAFFIC_AS_ENABLE	0x00800000
+#define BM_CLKCTRL_HBUS_CPU_DATA_AS_ENABLE	0x00400000
+#define BM_CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE	0x00200000
+#define BM_CLKCTRL_HBUS_ASM_ENABLE	0x00100000
+#define BM_CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE	0x00080000
+#define BP_CLKCTRL_HBUS_SLOW_DIV	16
+#define BM_CLKCTRL_HBUS_SLOW_DIV	0x00070000
+#define BF_CLKCTRL_HBUS_SLOW_DIV(v)  \
+		(((v) << 16) & BM_CLKCTRL_HBUS_SLOW_DIV)
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY1  0x0
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY2  0x1
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY4  0x2
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY8  0x3
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY16 0x4
+#define BV_CLKCTRL_HBUS_SLOW_DIV__BY32 0x5
+#define BP_CLKCTRL_HBUS_RSRVD1	6
+#define BM_CLKCTRL_HBUS_RSRVD1	0x0000FFC0
+#define BF_CLKCTRL_HBUS_RSRVD1(v)  \
+		(((v) << 6) & BM_CLKCTRL_HBUS_RSRVD1)
+#define BM_CLKCTRL_HBUS_DIV_FRAC_EN	0x00000020
+#define BP_CLKCTRL_HBUS_DIV	0
+#define BM_CLKCTRL_HBUS_DIV	0x0000001F
+#define BF_CLKCTRL_HBUS_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_HBUS_DIV)
+
+#define HW_CLKCTRL_XBUS	(0x00000070)
+
+#define BM_CLKCTRL_XBUS_BUSY	0x80000000
+#define BP_CLKCTRL_XBUS_RSRVD1	12
+#define BM_CLKCTRL_XBUS_RSRVD1	0x7FFFF000
+#define BF_CLKCTRL_XBUS_RSRVD1(v)  \
+		(((v) << 12) & BM_CLKCTRL_XBUS_RSRVD1)
+#define BM_CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE	0x00000800
+#define BM_CLKCTRL_XBUS_DIV_FRAC_EN	0x00000400
+#define BP_CLKCTRL_XBUS_DIV	0
+#define BM_CLKCTRL_XBUS_DIV	0x000003FF
+#define BF_CLKCTRL_XBUS_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_XBUS_DIV)
+
+#define HW_CLKCTRL_XTAL	(0x00000080)
+#define HW_CLKCTRL_XTAL_SET	(0x00000084)
+#define HW_CLKCTRL_XTAL_CLR	(0x00000088)
+#define HW_CLKCTRL_XTAL_TOG	(0x0000008c)
+
+#define BP_CLKCTRL_XTAL_UART_CLK_GATE	31
+#define BM_CLKCTRL_XTAL_UART_CLK_GATE	0x80000000
+#define BM_CLKCTRL_XTAL_RSRVD3	0x40000000
+#define BP_CLKCTRL_XTAL_PWM_CLK24M_GATE	29
+#define BM_CLKCTRL_XTAL_PWM_CLK24M_GATE	0x20000000
+#define BP_CLKCTRL_XTAL_RSRVD2	27
+#define BM_CLKCTRL_XTAL_RSRVD2	0x18000000
+#define BF_CLKCTRL_XTAL_RSRVD2(v)  \
+		(((v) << 27) & BM_CLKCTRL_XTAL_RSRVD2)
+#define BP_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	26
+#define BM_CLKCTRL_XTAL_TIMROT_CLK32K_GATE	0x04000000
+#define BP_CLKCTRL_XTAL_RSRVD1	2
+#define BM_CLKCTRL_XTAL_RSRVD1	0x03FFFFFC
+#define BF_CLKCTRL_XTAL_RSRVD1(v)  \
+		(((v) << 2) & BM_CLKCTRL_XTAL_RSRVD1)
+#define BP_CLKCTRL_XTAL_DIV_UART	0
+#define BM_CLKCTRL_XTAL_DIV_UART	0x00000003
+#define BF_CLKCTRL_XTAL_DIV_UART(v)  \
+		(((v) << 0) & BM_CLKCTRL_XTAL_DIV_UART)
+
+#define HW_CLKCTRL_SSP0	(0x00000090)
+
+#define BP_CLKCTRL_SSP0_CLKGATE	31
+#define BM_CLKCTRL_SSP0_CLKGATE	0x80000000
+#define BM_CLKCTRL_SSP0_RSRVD2	0x40000000
+#define BM_CLKCTRL_SSP0_BUSY	0x20000000
+#define BP_CLKCTRL_SSP0_RSRVD1	10
+#define BM_CLKCTRL_SSP0_RSRVD1	0x1FFFFC00
+#define BF_CLKCTRL_SSP0_RSRVD1(v)  \
+		(((v) << 10) & BM_CLKCTRL_SSP0_RSRVD1)
+#define BM_CLKCTRL_SSP0_DIV_FRAC_EN	0x00000200
+#define BP_CLKCTRL_SSP0_DIV	0
+#define BM_CLKCTRL_SSP0_DIV	0x000001FF
+#define BF_CLKCTRL_SSP0_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_SSP0_DIV)
+
+#define HW_CLKCTRL_SSP1	(0x000000a0)
+
+#define BP_CLKCTRL_SSP1_CLKGATE	31
+#define BM_CLKCTRL_SSP1_CLKGATE	0x80000000
+#define BM_CLKCTRL_SSP1_RSRVD2	0x40000000
+#define BM_CLKCTRL_SSP1_BUSY	0x20000000
+#define BP_CLKCTRL_SSP1_RSRVD1	10
+#define BM_CLKCTRL_SSP1_RSRVD1	0x1FFFFC00
+#define BF_CLKCTRL_SSP1_RSRVD1(v)  \
+		(((v) << 10) & BM_CLKCTRL_SSP1_RSRVD1)
+#define BM_CLKCTRL_SSP1_DIV_FRAC_EN	0x00000200
+#define BP_CLKCTRL_SSP1_DIV	0
+#define BM_CLKCTRL_SSP1_DIV	0x000001FF
+#define BF_CLKCTRL_SSP1_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_SSP1_DIV)
+
+#define HW_CLKCTRL_SSP2	(0x000000b0)
+
+#define BP_CLKCTRL_SSP2_CLKGATE	31
+#define BM_CLKCTRL_SSP2_CLKGATE	0x80000000
+#define BM_CLKCTRL_SSP2_RSRVD2	0x40000000
+#define BM_CLKCTRL_SSP2_BUSY	0x20000000
+#define BP_CLKCTRL_SSP2_RSRVD1	10
+#define BM_CLKCTRL_SSP2_RSRVD1	0x1FFFFC00
+#define BF_CLKCTRL_SSP2_RSRVD1(v)  \
+		(((v) << 10) & BM_CLKCTRL_SSP2_RSRVD1)
+#define BM_CLKCTRL_SSP2_DIV_FRAC_EN	0x00000200
+#define BP_CLKCTRL_SSP2_DIV	0
+#define BM_CLKCTRL_SSP2_DIV	0x000001FF
+#define BF_CLKCTRL_SSP2_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_SSP2_DIV)
+
+#define HW_CLKCTRL_SSP3	(0x000000c0)
+
+#define BP_CLKCTRL_SSP3_CLKGATE	31
+#define BM_CLKCTRL_SSP3_CLKGATE	0x80000000
+#define BM_CLKCTRL_SSP3_RSRVD2	0x40000000
+#define BM_CLKCTRL_SSP3_BUSY	0x20000000
+#define BP_CLKCTRL_SSP3_RSRVD1	10
+#define BM_CLKCTRL_SSP3_RSRVD1	0x1FFFFC00
+#define BF_CLKCTRL_SSP3_RSRVD1(v)  \
+		(((v) << 10) & BM_CLKCTRL_SSP3_RSRVD1)
+#define BM_CLKCTRL_SSP3_DIV_FRAC_EN	0x00000200
+#define BP_CLKCTRL_SSP3_DIV	0
+#define BM_CLKCTRL_SSP3_DIV	0x000001FF
+#define BF_CLKCTRL_SSP3_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_SSP3_DIV)
+
+#define HW_CLKCTRL_GPMI	(0x000000d0)
+
+#define BP_CLKCTRL_GPMI_CLKGATE	31
+#define BM_CLKCTRL_GPMI_CLKGATE	0x80000000
+#define BM_CLKCTRL_GPMI_RSRVD2	0x40000000
+#define BM_CLKCTRL_GPMI_BUSY	0x20000000
+#define BP_CLKCTRL_GPMI_RSRVD1	11
+#define BM_CLKCTRL_GPMI_RSRVD1	0x1FFFF800
+#define BF_CLKCTRL_GPMI_RSRVD1(v)  \
+		(((v) << 11) & BM_CLKCTRL_GPMI_RSRVD1)
+#define BM_CLKCTRL_GPMI_DIV_FRAC_EN	0x00000400
+#define BP_CLKCTRL_GPMI_DIV	0
+#define BM_CLKCTRL_GPMI_DIV	0x000003FF
+#define BF_CLKCTRL_GPMI_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_GPMI_DIV)
+
+#define HW_CLKCTRL_SPDIF	(0x000000e0)
+
+#define BP_CLKCTRL_SPDIF_CLKGATE	31
+#define BM_CLKCTRL_SPDIF_CLKGATE	0x80000000
+#define BP_CLKCTRL_SPDIF_RSRVD	0
+#define BM_CLKCTRL_SPDIF_RSRVD	0x7FFFFFFF
+#define BF_CLKCTRL_SPDIF_RSRVD(v)  \
+		(((v) << 0) & BM_CLKCTRL_SPDIF_RSRVD)
+
+#define HW_CLKCTRL_EMI	(0x000000f0)
+
+#define BP_CLKCTRL_EMI_CLKGATE	31
+#define BM_CLKCTRL_EMI_CLKGATE	0x80000000
+#define BM_CLKCTRL_EMI_SYNC_MODE_EN	0x40000000
+#define BM_CLKCTRL_EMI_BUSY_REF_XTAL	0x20000000
+#define BM_CLKCTRL_EMI_BUSY_REF_EMI	0x10000000
+#define BM_CLKCTRL_EMI_BUSY_REF_CPU	0x08000000
+#define BM_CLKCTRL_EMI_BUSY_SYNC_MODE	0x04000000
+#define BP_CLKCTRL_EMI_RSRVD3	18
+#define BM_CLKCTRL_EMI_RSRVD3	0x03FC0000
+#define BF_CLKCTRL_EMI_RSRVD3(v)  \
+		(((v) << 18) & BM_CLKCTRL_EMI_RSRVD3)
+#define BM_CLKCTRL_EMI_BUSY_DCC_RESYNC	0x00020000
+#define BM_CLKCTRL_EMI_DCC_RESYNC_ENABLE	0x00010000
+#define BP_CLKCTRL_EMI_RSRVD2	12
+#define BM_CLKCTRL_EMI_RSRVD2	0x0000F000
+#define BF_CLKCTRL_EMI_RSRVD2(v)  \
+		(((v) << 12) & BM_CLKCTRL_EMI_RSRVD2)
+#define BP_CLKCTRL_EMI_DIV_XTAL	8
+#define BM_CLKCTRL_EMI_DIV_XTAL	0x00000F00
+#define BF_CLKCTRL_EMI_DIV_XTAL(v)  \
+		(((v) << 8) & BM_CLKCTRL_EMI_DIV_XTAL)
+#define BP_CLKCTRL_EMI_RSRVD1	6
+#define BM_CLKCTRL_EMI_RSRVD1	0x000000C0
+#define BF_CLKCTRL_EMI_RSRVD1(v)  \
+		(((v) << 6) & BM_CLKCTRL_EMI_RSRVD1)
+#define BP_CLKCTRL_EMI_DIV_EMI	0
+#define BM_CLKCTRL_EMI_DIV_EMI	0x0000003F
+#define BF_CLKCTRL_EMI_DIV_EMI(v)  \
+		(((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
+
+#define HW_CLKCTRL_SAIF0	(0x00000100)
+
+#define BP_CLKCTRL_SAIF0_CLKGATE	31
+#define BM_CLKCTRL_SAIF0_CLKGATE	0x80000000
+#define BM_CLKCTRL_SAIF0_RSRVD2	0x40000000
+#define BM_CLKCTRL_SAIF0_BUSY	0x20000000
+#define BP_CLKCTRL_SAIF0_RSRVD1	17
+#define BM_CLKCTRL_SAIF0_RSRVD1	0x1FFE0000
+#define BF_CLKCTRL_SAIF0_RSRVD1(v)  \
+		(((v) << 17) & BM_CLKCTRL_SAIF0_RSRVD1)
+#define BM_CLKCTRL_SAIF0_DIV_FRAC_EN	0x00010000
+#define BP_CLKCTRL_SAIF0_DIV	0
+#define BM_CLKCTRL_SAIF0_DIV	0x0000FFFF
+#define BF_CLKCTRL_SAIF0_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_SAIF0_DIV)
+
+#define HW_CLKCTRL_SAIF1	(0x00000110)
+
+#define BP_CLKCTRL_SAIF1_CLKGATE	31
+#define BM_CLKCTRL_SAIF1_CLKGATE	0x80000000
+#define BM_CLKCTRL_SAIF1_RSRVD2	0x40000000
+#define BM_CLKCTRL_SAIF1_BUSY	0x20000000
+#define BP_CLKCTRL_SAIF1_RSRVD1	17
+#define BM_CLKCTRL_SAIF1_RSRVD1	0x1FFE0000
+#define BF_CLKCTRL_SAIF1_RSRVD1(v)  \
+		(((v) << 17) & BM_CLKCTRL_SAIF1_RSRVD1)
+#define BM_CLKCTRL_SAIF1_DIV_FRAC_EN	0x00010000
+#define BP_CLKCTRL_SAIF1_DIV	0
+#define BM_CLKCTRL_SAIF1_DIV	0x0000FFFF
+#define BF_CLKCTRL_SAIF1_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_SAIF1_DIV)
+
+#define HW_CLKCTRL_DIS_LCDIF	(0x00000120)
+
+#define BP_CLKCTRL_DIS_LCDIF_CLKGATE	31
+#define BM_CLKCTRL_DIS_LCDIF_CLKGATE	0x80000000
+#define BM_CLKCTRL_DIS_LCDIF_RSRVD2	0x40000000
+#define BM_CLKCTRL_DIS_LCDIF_BUSY	0x20000000
+#define BP_CLKCTRL_DIS_LCDIF_RSRVD1	14
+#define BM_CLKCTRL_DIS_LCDIF_RSRVD1	0x1FFFC000
+#define BF_CLKCTRL_DIS_LCDIF_RSRVD1(v)  \
+		(((v) << 14) & BM_CLKCTRL_DIS_LCDIF_RSRVD1)
+#define BM_CLKCTRL_DIS_LCDIF_DIV_FRAC_EN	0x00002000
+#define BP_CLKCTRL_DIS_LCDIF_DIV	0
+#define BM_CLKCTRL_DIS_LCDIF_DIV	0x00001FFF
+#define BF_CLKCTRL_DIS_LCDIF_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_DIS_LCDIF_DIV)
+
+#define HW_CLKCTRL_ETM	(0x00000130)
+
+#define BM_CLKCTRL_ETM_CLKGATE	0x80000000
+#define BM_CLKCTRL_ETM_RSRVD2	0x40000000
+#define BM_CLKCTRL_ETM_BUSY	0x20000000
+#define BP_CLKCTRL_ETM_RSRVD1	8
+#define BM_CLKCTRL_ETM_RSRVD1	0x1FFFFF00
+#define BF_CLKCTRL_ETM_RSRVD1(v)  \
+		(((v) << 8) & BM_CLKCTRL_ETM_RSRVD1)
+#define BM_CLKCTRL_ETM_DIV_FRAC_EN	0x00000080
+#define BP_CLKCTRL_ETM_DIV	0
+#define BM_CLKCTRL_ETM_DIV	0x0000007F
+#define BF_CLKCTRL_ETM_DIV(v)  \
+		(((v) << 0) & BM_CLKCTRL_ETM_DIV)
+
+#define HW_CLKCTRL_ENET	(0x00000140)
+
+#define BM_CLKCTRL_ENET_SLEEP	0x80000000
+#define BP_CLKCTRL_ENET_DISABLE	30
+#define BM_CLKCTRL_ENET_DISABLE	0x40000000
+#define BM_CLKCTRL_ENET_STATUS	0x20000000
+#define BM_CLKCTRL_ENET_RSRVD1	0x10000000
+#define BM_CLKCTRL_ENET_BUSY_TIME	0x08000000
+#define BP_CLKCTRL_ENET_DIV_TIME	21
+#define BM_CLKCTRL_ENET_DIV_TIME	0x07E00000
+#define BF_CLKCTRL_ENET_DIV_TIME(v)  \
+		(((v) << 21) & BM_CLKCTRL_ENET_DIV_TIME)
+#define BM_CLKCTRL_ENET_BUSY	0x08000000
+#define BP_CLKCTRL_ENET_DIV	21
+#define BM_CLKCTRL_ENET_DIV	0x07E00000
+#define BF_CLKCTRL_ENET_DIV(v)  \
+		(((v) << 21) & BM_CLKCTRL_ENET_DIV)
+#define BP_CLKCTRL_ENET_TIME_SEL	19
+#define BM_CLKCTRL_ENET_TIME_SEL	0x00180000
+#define BF_CLKCTRL_ENET_TIME_SEL(v)  \
+		(((v) << 19) & BM_CLKCTRL_ENET_TIME_SEL)
+#define BV_CLKCTRL_ENET_TIME_SEL__XTAL      0x0
+#define BV_CLKCTRL_ENET_TIME_SEL__PLL       0x1
+#define BV_CLKCTRL_ENET_TIME_SEL__RMII_CLK  0x2
+#define BV_CLKCTRL_ENET_TIME_SEL__UNDEFINED 0x3
+#define BM_CLKCTRL_ENET_CLK_OUT_EN	0x00040000
+#define BM_CLKCTRL_ENET_RESET_BY_SW_CHIP	0x00020000
+#define BM_CLKCTRL_ENET_RESET_BY_SW	0x00010000
+#define BP_CLKCTRL_ENET_RSRVD0	0
+#define BM_CLKCTRL_ENET_RSRVD0	0x0000FFFF
+#define BF_CLKCTRL_ENET_RSRVD0(v)  \
+		(((v) << 0) & BM_CLKCTRL_ENET_RSRVD0)
+
+#define HW_CLKCTRL_HSADC	(0x00000150)
+
+#define BM_CLKCTRL_HSADC_RSRVD2	0x80000000
+#define BM_CLKCTRL_HSADC_RESETB	0x40000000
+#define BP_CLKCTRL_HSADC_FREQDIV	28
+#define BM_CLKCTRL_HSADC_FREQDIV	0x30000000
+#define BF_CLKCTRL_HSADC_FREQDIV(v)  \
+		(((v) << 28) & BM_CLKCTRL_HSADC_FREQDIV)
+#define BP_CLKCTRL_HSADC_RSRVD1	0
+#define BM_CLKCTRL_HSADC_RSRVD1	0x0FFFFFFF
+#define BF_CLKCTRL_HSADC_RSRVD1(v)  \
+		(((v) << 0) & BM_CLKCTRL_HSADC_RSRVD1)
+
+#define HW_CLKCTRL_FLEXCAN	(0x00000160)
+
+#define BM_CLKCTRL_FLEXCAN_RSRVD2	0x80000000
+#define BP_CLKCTRL_FLEXCAN_STOP_CAN0	30
+#define BM_CLKCTRL_FLEXCAN_STOP_CAN0	0x40000000
+#define BM_CLKCTRL_FLEXCAN_CAN0_STATUS	0x20000000
+#define BP_CLKCTRL_FLEXCAN_STOP_CAN1	28
+#define BM_CLKCTRL_FLEXCAN_STOP_CAN1	0x10000000
+#define BM_CLKCTRL_FLEXCAN_CAN1_STATUS	0x08000000
+#define BP_CLKCTRL_FLEXCAN_RSRVD1	0
+#define BM_CLKCTRL_FLEXCAN_RSRVD1	0x07FFFFFF
+#define BF_CLKCTRL_FLEXCAN_RSRVD1(v)  \
+		(((v) << 0) & BM_CLKCTRL_FLEXCAN_RSRVD1)
+
+#define HW_CLKCTRL_FRAC0	(0x000001b0)
+#define HW_CLKCTRL_FRAC0_SET	(0x000001b4)
+#define HW_CLKCTRL_FRAC0_CLR	(0x000001b8)
+#define HW_CLKCTRL_FRAC0_TOG	(0x000001bc)
+
+#define BP_CLKCTRL_FRAC0_CLKGATEIO0	31
+#define BM_CLKCTRL_FRAC0_CLKGATEIO0	0x80000000
+#define BM_CLKCTRL_FRAC0_IO0_STABLE	0x40000000
+#define BP_CLKCTRL_FRAC0_IO0FRAC	24
+#define BM_CLKCTRL_FRAC0_IO0FRAC	0x3F000000
+#define BF_CLKCTRL_FRAC0_IO0FRAC(v)  \
+		(((v) << 24) & BM_CLKCTRL_FRAC0_IO0FRAC)
+#define BP_CLKCTRL_FRAC0_CLKGATEIO1	23
+#define BM_CLKCTRL_FRAC0_CLKGATEIO1	0x00800000
+#define BM_CLKCTRL_FRAC0_IO1_STABLE	0x00400000
+#define BP_CLKCTRL_FRAC0_IO1FRAC	16
+#define BM_CLKCTRL_FRAC0_IO1FRAC	0x003F0000
+#define BF_CLKCTRL_FRAC0_IO1FRAC(v)  \
+		(((v) << 16) & BM_CLKCTRL_FRAC0_IO1FRAC)
+#define BP_CLKCTRL_FRAC0_CLKGATEEMI	15
+#define BM_CLKCTRL_FRAC0_CLKGATEEMI	0x00008000
+#define BM_CLKCTRL_FRAC0_EMI_STABLE	0x00004000
+#define BP_CLKCTRL_FRAC0_EMIFRAC	8
+#define BM_CLKCTRL_FRAC0_EMIFRAC	0x00003F00
+#define BF_CLKCTRL_FRAC0_EMIFRAC(v)  \
+		(((v) << 8) & BM_CLKCTRL_FRAC0_EMIFRAC)
+#define BP_CLKCTRL_FRAC0_CLKGATECPU	7
+#define BM_CLKCTRL_FRAC0_CLKGATECPU	0x00000080
+#define BM_CLKCTRL_FRAC0_CPU_STABLE	0x00000040
+#define BP_CLKCTRL_FRAC0_CPUFRAC	0
+#define BM_CLKCTRL_FRAC0_CPUFRAC	0x0000003F
+#define BF_CLKCTRL_FRAC0_CPUFRAC(v)  \
+		(((v) << 0) & BM_CLKCTRL_FRAC0_CPUFRAC)
+
+#define HW_CLKCTRL_FRAC1	(0x000001c0)
+#define HW_CLKCTRL_FRAC1_SET	(0x000001c4)
+#define HW_CLKCTRL_FRAC1_CLR	(0x000001c8)
+#define HW_CLKCTRL_FRAC1_TOG	(0x000001cc)
+
+#define BP_CLKCTRL_FRAC1_RSRVD2	24
+#define BM_CLKCTRL_FRAC1_RSRVD2	0xFF000000
+#define BF_CLKCTRL_FRAC1_RSRVD2(v) \
+		(((v) << 24) & BM_CLKCTRL_FRAC1_RSRVD2)
+#define BP_CLKCTRL_FRAC1_CLKGATEGPMI	23
+#define BM_CLKCTRL_FRAC1_CLKGATEGPMI	0x00800000
+#define BM_CLKCTRL_FRAC1_GPMI_STABLE	0x00400000
+#define BP_CLKCTRL_FRAC1_GPMIFRAC	16
+#define BM_CLKCTRL_FRAC1_GPMIFRAC	0x003F0000
+#define BF_CLKCTRL_FRAC1_GPMIFRAC(v)  \
+		(((v) << 16) & BM_CLKCTRL_FRAC1_GPMIFRAC)
+#define BP_CLKCTRL_FRAC1_CLKGATEHSADC	15
+#define BM_CLKCTRL_FRAC1_CLKGATEHSADC	0x00008000
+#define BM_CLKCTRL_FRAC1_HSADC_STABLE	0x00004000
+#define BP_CLKCTRL_FRAC1_HSADCFRAC	8
+#define BM_CLKCTRL_FRAC1_HSADCFRAC	0x00003F00
+#define BF_CLKCTRL_FRAC1_HSADCFRAC(v)  \
+		(((v) << 8) & BM_CLKCTRL_FRAC1_HSADCFRAC)
+#define BP_CLKCTRL_FRAC1_CLKGATEPIX	7
+#define BM_CLKCTRL_FRAC1_CLKGATEPIX	0x00000080
+#define BM_CLKCTRL_FRAC1_PIX_STABLE	0x00000040
+#define BP_CLKCTRL_FRAC1_PIXFRAC	0
+#define BM_CLKCTRL_FRAC1_PIXFRAC	0x0000003F
+#define BF_CLKCTRL_FRAC1_PIXFRAC(v)  \
+		(((v) << 0) & BM_CLKCTRL_FRAC1_PIXFRAC)
+
+#define HW_CLKCTRL_CLKSEQ	(0x000001d0)
+#define HW_CLKCTRL_CLKSEQ_SET	(0x000001d4)
+#define HW_CLKCTRL_CLKSEQ_CLR	(0x000001d8)
+#define HW_CLKCTRL_CLKSEQ_TOG	(0x000001dc)
+
+#define BP_CLKCTRL_CLKSEQ_RSRVD0	19
+#define BM_CLKCTRL_CLKSEQ_RSRVD0	0xFFF80000
+#define BF_CLKCTRL_CLKSEQ_RSRVD0(v) \
+		(((v) << 19) & BM_CLKCTRL_CLKSEQ_RSRVD0)
+#define BM_CLKCTRL_CLKSEQ_BYPASS_CPU	0x00040000
+#define BP_CLKCTRL_CLKSEQ_RSRVD1	15
+#define BM_CLKCTRL_CLKSEQ_RSRVD1	0x00038000
+#define BF_CLKCTRL_CLKSEQ_RSRVD1(v)  \
+		(((v) << 15) & BM_CLKCTRL_CLKSEQ_RSRVD1)
+#define BM_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF	0x00004000
+#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__BYPASS 0x1
+#define BV_CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF__PFD    0x0
+#define BP_CLKCTRL_CLKSEQ_RSRVD2	9
+#define BM_CLKCTRL_CLKSEQ_RSRVD2	0x00003E00
+#define BF_CLKCTRL_CLKSEQ_RSRVD2(v)  \
+		(((v) << 9) & BM_CLKCTRL_CLKSEQ_RSRVD2)
+#define BM_CLKCTRL_CLKSEQ_BYPASS_ETM	0x00000100
+#define BM_CLKCTRL_CLKSEQ_BYPASS_EMI	0x00000080
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP3	0x00000040
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP2	0x00000020
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP1	0x00000010
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SSP0	0x00000008
+#define BM_CLKCTRL_CLKSEQ_BYPASS_GPMI	0x00000004
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF1	0x00000002
+#define BM_CLKCTRL_CLKSEQ_BYPASS_SAIF0	0x00000001
+
+#define HW_CLKCTRL_RESET	(0x000001e0)
+
+#define BP_CLKCTRL_RESET_RSRVD	6
+#define BM_CLKCTRL_RESET_RSRVD	0xFFFFFFC0
+#define BF_CLKCTRL_RESET_RSRVD(v) \
+		(((v) << 6) & BM_CLKCTRL_RESET_RSRVD)
+#define BM_CLKCTRL_RESET_WDOG_POR_DISABLE	0x00000020
+#define BM_CLKCTRL_RESET_EXTERNAL_RESET_ENABLE	0x00000010
+#define BM_CLKCTRL_RESET_THERMAL_RESET_ENABLE	0x00000008
+#define BM_CLKCTRL_RESET_THERMAL_RESET_DEFAULT	0x00000004
+#define BM_CLKCTRL_RESET_CHIP	0x00000002
+#define BM_CLKCTRL_RESET_DIG	0x00000001
+
+#define HW_CLKCTRL_STATUS	(0x000001f0)
+
+#define BP_CLKCTRL_STATUS_CPU_LIMIT	30
+#define BM_CLKCTRL_STATUS_CPU_LIMIT	0xC0000000
+#define BF_CLKCTRL_STATUS_CPU_LIMIT(v) \
+		(((v) << 30) & BM_CLKCTRL_STATUS_CPU_LIMIT)
+#define BP_CLKCTRL_STATUS_RSRVD	0
+#define BM_CLKCTRL_STATUS_RSRVD	0x3FFFFFFF
+#define BF_CLKCTRL_STATUS_RSRVD(v)  \
+		(((v) << 0) & BM_CLKCTRL_STATUS_RSRVD)
+
+#define HW_CLKCTRL_VERSION	(0x00000200)
+
+#define BP_CLKCTRL_VERSION_MAJOR	24
+#define BM_CLKCTRL_VERSION_MAJOR	0xFF000000
+#define BF_CLKCTRL_VERSION_MAJOR(v) \
+		(((v) << 24) & BM_CLKCTRL_VERSION_MAJOR)
+#define BP_CLKCTRL_VERSION_MINOR	16
+#define BM_CLKCTRL_VERSION_MINOR	0x00FF0000
+#define BF_CLKCTRL_VERSION_MINOR(v)  \
+		(((v) << 16) & BM_CLKCTRL_VERSION_MINOR)
+#define BP_CLKCTRL_VERSION_STEP	0
+#define BM_CLKCTRL_VERSION_STEP	0x0000FFFF
+#define BF_CLKCTRL_VERSION_STEP(v)  \
+		(((v) << 0) & BM_CLKCTRL_VERSION_STEP)
+
+#endif /* __REGS_CLKCTRL_MX28_H__ */
diff --git a/arch/arm/mach-mxs/system.c b/arch/arm/mach-mxs/system.c
new file mode 100644
index 00000000000..9343d7edd4f
--- /dev/null
+++ b/arch/arm/mach-mxs/system.c
@@ -0,0 +1,137 @@
+/*
+ * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <asm/proc-fns.h>
+#include <asm/system.h>
+
+#include <mach/mxs.h>
+#include <mach/common.h>
+
+#define MX23_CLKCTRL_RESET_OFFSET	0x120
+#define MX28_CLKCTRL_RESET_OFFSET	0x1e0
+#define MXS_CLKCTRL_RESET_CHIP		(1 << 1)
+
+#define MXS_MODULE_CLKGATE		(1 << 30)
+#define MXS_MODULE_SFTRST		(1 << 31)
+
+static void __iomem *mxs_clkctrl_reset_addr;
+
+/*
+ * Reset the system. It is called by machine_restart().
+ */
+void arch_reset(char mode, const char *cmd)
+{
+	/* reset the chip */
+	__mxs_setl(MXS_CLKCTRL_RESET_CHIP, mxs_clkctrl_reset_addr);
+
+	pr_err("Failed to assert the chip reset\n");
+
+	/* Delay to allow the serial port to show the message */
+	mdelay(50);
+
+	/* We'll take a jump through zero as a poor second */
+	cpu_reset(0);
+}
+
+static int __init mxs_arch_reset_init(void)
+{
+	struct clk *clk;
+
+	mxs_clkctrl_reset_addr = MXS_IO_ADDRESS(MXS_CLKCTRL_BASE_ADDR) +
+				(cpu_is_mx23() ? MX23_CLKCTRL_RESET_OFFSET :
+						 MX28_CLKCTRL_RESET_OFFSET);
+
+	clk = clk_get_sys("rtc", NULL);
+	if (!IS_ERR(clk))
+		clk_enable(clk);
+
+	return 0;
+}
+core_initcall(mxs_arch_reset_init);
+
+/*
+ * Clear the bit and poll it cleared.  This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int clear_poll_bit(void __iomem *addr, u32 mask)
+{
+	int timeout = 0x400;
+
+	/* clear the bit */
+	__mxs_clrl(mask, addr);
+
+	/*
+	 * SFTRST needs 3 GPMI clocks to settle, the reference manual
+	 * recommends to wait 1us.
+	 */
+	udelay(1);
+
+	/* poll the bit becoming clear */
+	while ((__raw_readl(addr) & mask) && --timeout)
+		/* nothing */;
+
+	return !timeout;
+}
+
+int mxs_reset_block(void __iomem *reset_addr)
+{
+	int ret;
+	int timeout = 0x400;
+
+	/* clear and poll SFTRST */
+	ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
+	if (unlikely(ret))
+		goto error;
+
+	/* clear CLKGATE */
+	__mxs_clrl(MXS_MODULE_CLKGATE, reset_addr);
+
+	/* set SFTRST to reset the block */
+	__mxs_setl(MXS_MODULE_SFTRST, reset_addr);
+	udelay(1);
+
+	/* poll CLKGATE becoming set */
+	while ((!(__raw_readl(reset_addr) & MXS_MODULE_CLKGATE)) && --timeout)
+		/* nothing */;
+	if (unlikely(!timeout))
+		goto error;
+
+	/* clear and poll SFTRST */
+	ret = clear_poll_bit(reset_addr, MXS_MODULE_SFTRST);
+	if (unlikely(ret))
+		goto error;
+
+	/* clear and poll CLKGATE */
+	ret = clear_poll_bit(reset_addr, MXS_MODULE_CLKGATE);
+	if (unlikely(ret))
+		goto error;
+
+	return 0;
+
+error:
+	pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+	return -ETIMEDOUT;
+}
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
new file mode 100644
index 00000000000..13647f30186
--- /dev/null
+++ b/arch/arm/mach-mxs/timer.c
@@ -0,0 +1,296 @@
+/*
+ *  Copyright (C) 2000-2001 Deep Blue Solutions
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
+ *  Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *  Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/clockchips.h>
+#include <linux/clk.h>
+
+#include <asm/mach/time.h>
+#include <mach/mxs.h>
+#include <mach/common.h>
+
+/*
+ * There are 2 versions of the timrot on Freescale MXS-based SoCs.
+ * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
+ * extends the counter to 32 bits.
+ *
+ * The implementation uses two timers, one for clock_event and
+ * another for clocksource. MX28 uses timrot 0 and 1, while MX23
+ * uses 0 and 2.
+ */
+
+#define MX23_TIMROT_VERSION_OFFSET	0x0a0
+#define MX28_TIMROT_VERSION_OFFSET	0x120
+#define BP_TIMROT_MAJOR_VERSION		24
+#define BV_TIMROT_VERSION_1		0x01
+#define BV_TIMROT_VERSION_2		0x02
+#define timrot_is_v1()	(timrot_major_version == BV_TIMROT_VERSION_1)
+
+/*
+ * There are 4 registers for each timrotv2 instance, and 2 registers
+ * for each timrotv1. So address step 0x40 in macros below strides
+ * one instance of timrotv2 while two instances of timrotv1.
+ *
+ * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
+ * on MX28 while timrot2 on MX23.
+ */
+/* common between v1 and v2 */
+#define HW_TIMROT_ROTCTRL		0x00
+#define HW_TIMROT_TIMCTRLn(n)		(0x20 + (n) * 0x40)
+/* v1 only */
+#define HW_TIMROT_TIMCOUNTn(n)		(0x30 + (n) * 0x40)
+/* v2 only */
+#define HW_TIMROT_RUNNING_COUNTn(n)	(0x30 + (n) * 0x40)
+#define HW_TIMROT_FIXED_COUNTn(n)	(0x40 + (n) * 0x40)
+
+#define BM_TIMROT_TIMCTRLn_RELOAD	(1 << 6)
+#define BM_TIMROT_TIMCTRLn_UPDATE	(1 << 7)
+#define BM_TIMROT_TIMCTRLn_IRQ_EN	(1 << 14)
+#define BM_TIMROT_TIMCTRLn_IRQ		(1 << 15)
+#define BP_TIMROT_TIMCTRLn_SELECT	0
+#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL	0x8
+#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL	0xb
+
+static struct clock_event_device mxs_clockevent_device;
+static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
+
+static void __iomem *mxs_timrot_base = MXS_IO_ADDRESS(MXS_TIMROT_BASE_ADDR);
+static u32 timrot_major_version;
+
+static inline void timrot_irq_disable(void)
+{
+	__mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ_EN,
+			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+}
+
+static inline void timrot_irq_enable(void)
+{
+	__mxs_setl(BM_TIMROT_TIMCTRLn_IRQ_EN,
+			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+}
+
+static void timrot_irq_acknowledge(void)
+{
+	__mxs_clrl(BM_TIMROT_TIMCTRLn_IRQ,
+			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+}
+
+static cycle_t timrotv1_get_cycles(struct clocksource *cs)
+{
+	return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
+			& 0xffff0000) >> 16);
+}
+
+static cycle_t timrotv2_get_cycles(struct clocksource *cs)
+{
+	return ~__raw_readl(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
+}
+
+static int timrotv1_set_next_event(unsigned long evt,
+					struct clock_event_device *dev)
+{
+	/* timrot decrements the count */
+	__raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
+
+	return 0;
+}
+
+static int timrotv2_set_next_event(unsigned long evt,
+					struct clock_event_device *dev)
+{
+	/* timrot decrements the count */
+	__raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
+
+	return 0;
+}
+
+static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	timrot_irq_acknowledge();
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction mxs_timer_irq = {
+	.name		= "MXS Timer Tick",
+	.dev_id		= &mxs_clockevent_device,
+	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= mxs_timer_interrupt,
+};
+
+#ifdef DEBUG
+static const char *clock_event_mode_label[] const = {
+	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
+	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
+	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
+	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
+};
+#endif /* DEBUG */
+
+static void mxs_set_mode(enum clock_event_mode mode,
+				struct clock_event_device *evt)
+{
+	/* Disable interrupt in timer module */
+	timrot_irq_disable();
+
+	if (mode != mxs_clockevent_mode) {
+		/* Set event time into the furthest future */
+		if (timrot_is_v1())
+			__raw_writel(0xffff,
+				mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+		else
+			__raw_writel(0xffffffff,
+				mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+		/* Clear pending interrupt */
+		timrot_irq_acknowledge();
+	}
+
+#ifdef DEBUG
+	pr_info("%s: changing mode from %s to %s\n", __func__,
+		clock_event_mode_label[mxs_clockevent_mode],
+		clock_event_mode_label[mode]);
+#endif /* DEBUG */
+
+	/* Remember timer mode */
+	mxs_clockevent_mode = mode;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		pr_err("%s: Periodic mode is not implemented\n", __func__);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		timrot_irq_enable();
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_RESUME:
+		/* Left event sources disabled, no more interrupts appear */
+		break;
+	}
+}
+
+static struct clock_event_device mxs_clockevent_device = {
+	.name		= "mxs_timrot",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_mode	= mxs_set_mode,
+	.set_next_event	= timrotv2_set_next_event,
+	.rating		= 200,
+};
+
+static int __init mxs_clockevent_init(struct clk *timer_clk)
+{
+	unsigned int c = clk_get_rate(timer_clk);
+
+	mxs_clockevent_device.mult =
+		div_sc(c, NSEC_PER_SEC, mxs_clockevent_device.shift);
+	mxs_clockevent_device.cpumask = cpumask_of(0);
+	if (timrot_is_v1()) {
+		mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
+		mxs_clockevent_device.max_delta_ns =
+			clockevent_delta2ns(0xfffe, &mxs_clockevent_device);
+		mxs_clockevent_device.min_delta_ns =
+			clockevent_delta2ns(0xf, &mxs_clockevent_device);
+	} else {
+		mxs_clockevent_device.max_delta_ns =
+			clockevent_delta2ns(0xfffffffe, &mxs_clockevent_device);
+		mxs_clockevent_device.min_delta_ns =
+			clockevent_delta2ns(0xf, &mxs_clockevent_device);
+	}
+
+	clockevents_register_device(&mxs_clockevent_device);
+
+	return 0;
+}
+
+static struct clocksource clocksource_mxs = {
+	.name		= "mxs_timer",
+	.rating		= 200,
+	.read		= timrotv2_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init mxs_clocksource_init(struct clk *timer_clk)
+{
+	unsigned int c = clk_get_rate(timer_clk);
+
+	if (timrot_is_v1()) {
+		clocksource_mxs.read = timrotv1_get_cycles;
+		clocksource_mxs.mask = CLOCKSOURCE_MASK(16);
+	}
+
+	clocksource_register_hz(&clocksource_mxs, c);
+
+	return 0;
+}
+
+void __init mxs_timer_init(struct clk *timer_clk, int irq)
+{
+	clk_enable(timer_clk);
+
+	/*
+	 * Initialize timers to a known state
+	 */
+	mxs_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
+
+	/* get timrot version */
+	timrot_major_version = __raw_readl(mxs_timrot_base +
+				(cpu_is_mx23() ? MX23_TIMROT_VERSION_OFFSET :
+						MX28_TIMROT_VERSION_OFFSET));
+	timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
+
+	/* one for clock_event */
+	__raw_writel((timrot_is_v1() ?
+			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+			BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) |
+			BM_TIMROT_TIMCTRLn_UPDATE |
+			BM_TIMROT_TIMCTRLn_IRQ_EN,
+			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
+
+	/* another for clocksource */
+	__raw_writel((timrot_is_v1() ?
+			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
+			BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL) |
+			BM_TIMROT_TIMCTRLn_RELOAD,
+			mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
+
+	/* set clocksource timer fixed count to the maximum */
+	if (timrot_is_v1())
+		__raw_writel(0xffff,
+			mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
+	else
+		__raw_writel(0xffffffff,
+			mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
+
+	/* init and register the timer to the framework */
+	mxs_clocksource_init(timer_clk);
+	mxs_clockevent_init(timer_clk);
+
+	/* Make irqs happen */
+	setup_irq(irq, &mxs_timer_irq);
+}
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
index 7cca3574308..871f1ef7bff 100644
--- a/arch/arm/mach-netx/include/mach/vmalloc.h
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -16,4 +16,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index 82801dbf057..f12f22d09b6 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -114,7 +114,6 @@ static struct clocksource clocksource_netx = {
 	.rating		= 200,
 	.read		= netx_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -151,9 +150,7 @@ static void __init netx_timer_init(void)
 	writel(NETX_GPIO_COUNTER_CTRL_RUN,
 			NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE));
 
-	clocksource_netx.mult =
-		clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_netx.shift);
-	clocksource_register(&clocksource_netx);
+	clocksource_register_hz(&clocksource_netx, CLOCK_TICK_RATE);
 
 	netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
 			netx_clockevent.shift);
diff --git a/arch/arm/mach-nomadik/clock.c b/arch/arm/mach-nomadik/clock.c
index 89f793adf77..48a59f24e10 100644
--- a/arch/arm/mach-nomadik/clock.c
+++ b/arch/arm/mach-nomadik/clock.c
@@ -7,7 +7,7 @@
 #include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/clk.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include "clock.h"
 
 /*
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 77281260358..9ca32f55728 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -35,7 +35,6 @@ static struct clocksource ns9360_clocksource = {
 	.rating	= 300,
 	.read	= ns9360_clocksource_read,
 	.mask	= CLOCKSOURCE_MASK(32),
-	.shift	= 20,
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -148,10 +147,7 @@ static void __init ns9360_timer_init(void)
 
 	__raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE));
 
-	ns9360_clocksource.mult = clocksource_hz2mult(ns9360_cpuclock(),
-			ns9360_clocksource.shift);
-
-	clocksource_register(&ns9360_clocksource);
+	clocksource_register_hz(&ns9360_clocksource, ns9360_cpuclock());
 
 	latch = SH_DIV(ns9360_cpuclock(), HZ, 0);
 
diff --git a/arch/arm/mach-nuc93x/clock.h b/arch/arm/mach-nuc93x/clock.h
index 18e51be4816..4de1f1da9dc 100644
--- a/arch/arm/mach-nuc93x/clock.h
+++ b/arch/arm/mach-nuc93x/clock.h
@@ -10,7 +10,7 @@
  * the Free Software Foundation; either version 2 of the License.
  */
 
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 void nuc93x_clk_enable(struct clk *clk, int enable);
 void clks_register(struct clk_lookup *clks, size_t num);
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 5f649637540..8d2f2daba0c 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -152,20 +152,11 @@ config MACH_NOKIA770
 config MACH_AMS_DELTA
 	bool "Amstrad E3 (Delta)"
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	select FIQ
 	help
 	  Support for the Amstrad E3 (codename Delta) videophone. Say Y here
 	  if you have such a device.
 
-config AMS_DELTA_FIQ
-	bool "Fast Interrupt Request (FIQ) support for the E3"
-	depends on MACH_AMS_DELTA
-	select FIQ
-	help
-	  Provide a FIQ handler for the E3.
-	  This allows for fast handling of interrupts generated
-	  by the clock line of the E3 mailboard (or a PS/2 keyboard)
-	  connected to the GPIO based external keyboard port.
-
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP board"
 	depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 9a304d854e3..6ee19504845 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o
 obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
@@ -39,8 +39,8 @@ obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
 obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
 obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
-obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
-obj-$(CONFIG_AMS_DELTA_FIQ)		+= ams-delta-fiq.o ams-delta-fiq-handler.o
+obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
+					   ams-delta-fiq-handler.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
 obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
 
@@ -49,6 +49,12 @@ ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
 endif
 
+# GPIO
+obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
+obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o
+
 # LEDs support
 led-$(CONFIG_MACH_OMAP_H2)		+= leds-h2p2-debug.o
 led-$(CONFIG_MACH_OMAP_H3)		+= leds-h2p2-debug.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 1d4163b9f0b..bd0495a9ac3 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -28,6 +28,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <plat/io.h>
 #include <plat/board-ams-delta.h>
 #include <mach/gpio.h>
 #include <plat/keypad.h>
@@ -42,84 +43,82 @@
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
 
-static int ams_delta_keymap[] = {
+static const unsigned int ams_delta_keymap[] = {
 	KEY(0, 0, KEY_F1),		/* Advert    */
 
-	KEY(3, 0, KEY_COFFEE),		/* Games     */
-	KEY(2, 0, KEY_QUESTION),	/* Directory */
-	KEY(3, 2, KEY_CONNECT),		/* Internet  */
-	KEY(2, 1, KEY_SHOP),		/* Services  */
+	KEY(0, 3, KEY_COFFEE),		/* Games     */
+	KEY(0, 2, KEY_QUESTION),	/* Directory */
+	KEY(2, 3, KEY_CONNECT),		/* Internet  */
+	KEY(1, 2, KEY_SHOP),		/* Services  */
 	KEY(1, 1, KEY_PHONE),		/* VoiceMail */
 
-	KEY(1, 0, KEY_DELETE),		/* Delete    */
+	KEY(0, 1, KEY_DELETE),		/* Delete    */
 	KEY(2, 2, KEY_PLAY),		/* Play      */
-	KEY(0, 1, KEY_PAGEUP),		/* Up        */
-	KEY(3, 1, KEY_PAGEDOWN),	/* Down      */
-	KEY(0, 2, KEY_EMAIL),		/* ReadEmail */
-	KEY(1, 2, KEY_STOP),		/* Stop      */
+	KEY(1, 0, KEY_PAGEUP),		/* Up        */
+	KEY(1, 3, KEY_PAGEDOWN),	/* Down      */
+	KEY(2, 0, KEY_EMAIL),		/* ReadEmail */
+	KEY(2, 1, KEY_STOP),		/* Stop      */
 
 	/* Numeric keypad portion */
-	KEY(7, 0, KEY_KP1),
-	KEY(6, 0, KEY_KP2),
-	KEY(5, 0, KEY_KP3),
-	KEY(7, 1, KEY_KP4),
-	KEY(6, 1, KEY_KP5),
-	KEY(5, 1, KEY_KP6),
-	KEY(7, 2, KEY_KP7),
-	KEY(6, 2, KEY_KP8),
-	KEY(5, 2, KEY_KP9),
-	KEY(6, 3, KEY_KP0),
-	KEY(7, 3, KEY_KPASTERISK),
-	KEY(5, 3, KEY_KPDOT),		/* # key     */
-	KEY(2, 7, KEY_NUMLOCK),		/* Mute      */
-	KEY(1, 7, KEY_KPMINUS),		/* Recall    */
-	KEY(1, 6, KEY_KPPLUS),		/* Redial    */
-	KEY(6, 7, KEY_KPSLASH),		/* Handsfree */
-	KEY(0, 6, KEY_ENTER),		/* Video     */
-
-	KEY(4, 7, KEY_CAMERA),		/* Photo     */
-
-	KEY(4, 0, KEY_F2),		/* Home      */
-	KEY(4, 1, KEY_F3),		/* Office    */
-	KEY(4, 2, KEY_F4),		/* Mobile    */
+	KEY(0, 7, KEY_KP1),
+	KEY(0, 6, KEY_KP2),
+	KEY(0, 5, KEY_KP3),
+	KEY(1, 7, KEY_KP4),
+	KEY(1, 6, KEY_KP5),
+	KEY(1, 5, KEY_KP6),
+	KEY(2, 7, KEY_KP7),
+	KEY(2, 6, KEY_KP8),
+	KEY(2, 5, KEY_KP9),
+	KEY(3, 6, KEY_KP0),
+	KEY(3, 7, KEY_KPASTERISK),
+	KEY(3, 5, KEY_KPDOT),		/* # key     */
+	KEY(7, 2, KEY_NUMLOCK),		/* Mute      */
+	KEY(7, 1, KEY_KPMINUS),		/* Recall    */
+	KEY(6, 1, KEY_KPPLUS),		/* Redial    */
+	KEY(7, 6, KEY_KPSLASH),		/* Handsfree */
+	KEY(6, 0, KEY_ENTER),		/* Video     */
+
+	KEY(7, 4, KEY_CAMERA),		/* Photo     */
+
+	KEY(0, 4, KEY_F2),		/* Home      */
+	KEY(1, 4, KEY_F3),		/* Office    */
+	KEY(2, 4, KEY_F4),		/* Mobile    */
 	KEY(7, 7, KEY_F5),		/* SMS       */
-	KEY(5, 7, KEY_F6),		/* Email     */
+	KEY(7, 5, KEY_F6),		/* Email     */
 
 	/* QWERTY portion of keypad */
-	KEY(4, 3, KEY_Q),
+	KEY(3, 4, KEY_Q),
 	KEY(3, 3, KEY_W),
-	KEY(2, 3, KEY_E),
-	KEY(1, 3, KEY_R),
-	KEY(0, 3, KEY_T),
-	KEY(7, 4, KEY_Y),
-	KEY(6, 4, KEY_U),
-	KEY(5, 4, KEY_I),
+	KEY(3, 2, KEY_E),
+	KEY(3, 1, KEY_R),
+	KEY(3, 0, KEY_T),
+	KEY(4, 7, KEY_Y),
+	KEY(4, 6, KEY_U),
+	KEY(4, 5, KEY_I),
 	KEY(4, 4, KEY_O),
-	KEY(3, 4, KEY_P),
+	KEY(4, 3, KEY_P),
 
-	KEY(2, 4, KEY_A),
-	KEY(1, 4, KEY_S),
-	KEY(0, 4, KEY_D),
-	KEY(7, 5, KEY_F),
-	KEY(6, 5, KEY_G),
+	KEY(4, 2, KEY_A),
+	KEY(4, 1, KEY_S),
+	KEY(4, 0, KEY_D),
+	KEY(5, 7, KEY_F),
+	KEY(5, 6, KEY_G),
 	KEY(5, 5, KEY_H),
-	KEY(4, 5, KEY_J),
-	KEY(3, 5, KEY_K),
-	KEY(2, 5, KEY_L),
+	KEY(5, 4, KEY_J),
+	KEY(5, 3, KEY_K),
+	KEY(5, 2, KEY_L),
 
-	KEY(1, 5, KEY_Z),
-	KEY(0, 5, KEY_X),
-	KEY(7, 6, KEY_C),
+	KEY(5, 1, KEY_Z),
+	KEY(5, 0, KEY_X),
+	KEY(6, 7, KEY_C),
 	KEY(6, 6, KEY_V),
-	KEY(5, 6, KEY_B),
-	KEY(4, 6, KEY_N),
-	KEY(3, 6, KEY_M),
-	KEY(2, 6, KEY_SPACE),
+	KEY(6, 5, KEY_B),
+	KEY(6, 4, KEY_N),
+	KEY(6, 3, KEY_M),
+	KEY(6, 2, KEY_SPACE),
 
-	KEY(0, 7, KEY_LEFTSHIFT),	/* Vol up    */
-	KEY(3, 7, KEY_LEFTCTRL),	/* Vol down  */
-
-	0
+	KEY(7, 0, KEY_LEFTSHIFT),	/* Vol up    */
+	KEY(7, 3, KEY_LEFTCTRL),	/* Vol down  */
 };
 
 void ams_delta_latch1_write(u8 mask, u8 value)
@@ -140,7 +139,6 @@ static void __init ams_delta_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct map_desc ams_delta_io_desc[] __initdata = {
@@ -189,11 +187,15 @@ static struct resource ams_delta_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data ams_delta_keymap_data = {
+	.keymap		= ams_delta_keymap,
+	.keymap_size	= ARRAY_SIZE(ams_delta_keymap),
+};
+
 static struct omap_kp_platform_data ams_delta_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap 	= ams_delta_keymap,
-	.keymapsize	= ARRAY_SIZE(ams_delta_keymap),
+	.keymap_data	= &ams_delta_keymap_data,
 	.delay		= 9,
 };
 
@@ -307,16 +309,14 @@ static void __init ams_delta_init(void)
 #endif
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
 
-#ifdef CONFIG_AMS_DELTA_FIQ
 	ams_delta_init_fiq();
-#endif
 
 	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 
 static struct plat_serial8250_port ams_delta_modem_ports[] = {
 	{
-		.membase	= (void *) AMS_DELTA_MODEM_VIRT,
+		.membase	= IOMEM(AMS_DELTA_MODEM_VIRT),
 		.mapbase	= AMS_DELTA_MODEM_PHYS,
 		.irq		= -EINVAL, /* changed later */
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -340,6 +340,9 @@ static int __init ams_delta_modem_init(void)
 {
 	int err;
 
+	if (!machine_is_ams_delta())
+		return -ENODEV;
+
 	omap_cfg_reg(M14_1510_GPIO2);
 	ams_delta_modem_ports[0].irq =
 			gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 149fdd32e12..0efb9dbae44 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -69,36 +69,35 @@
 #define fsample_cpld_clear(bit) \
     fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
 
-static int fsample_keymap[] = {
-	KEY(0,0,KEY_UP),
-	KEY(0,1,KEY_RIGHT),
-	KEY(0,2,KEY_LEFT),
-	KEY(0,3,KEY_DOWN),
-	KEY(0,4,KEY_ENTER),
-	KEY(1,0,KEY_F10),
-	KEY(1,1,KEY_SEND),
-	KEY(1,2,KEY_END),
-	KEY(1,3,KEY_VOLUMEDOWN),
-	KEY(1,4,KEY_VOLUMEUP),
-	KEY(1,5,KEY_RECORD),
-	KEY(2,0,KEY_F9),
-	KEY(2,1,KEY_3),
-	KEY(2,2,KEY_6),
-	KEY(2,3,KEY_9),
-	KEY(2,4,KEY_KPDOT),
-	KEY(3,0,KEY_BACK),
-	KEY(3,1,KEY_2),
-	KEY(3,2,KEY_5),
-	KEY(3,3,KEY_8),
-	KEY(3,4,KEY_0),
-	KEY(3,5,KEY_KPSLASH),
-	KEY(4,0,KEY_HOME),
-	KEY(4,1,KEY_1),
-	KEY(4,2,KEY_4),
-	KEY(4,3,KEY_7),
-	KEY(4,4,KEY_KPASTERISK),
-	KEY(4,5,KEY_POWER),
-	0
+static const unsigned int fsample_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_LEFT),
+	KEY(3, 0, KEY_DOWN),
+	KEY(4, 0, KEY_ENTER),
+	KEY(0, 1, KEY_F10),
+	KEY(1, 1, KEY_SEND),
+	KEY(2, 1, KEY_END),
+	KEY(3, 1, KEY_VOLUMEDOWN),
+	KEY(4, 1, KEY_VOLUMEUP),
+	KEY(5, 1, KEY_RECORD),
+	KEY(0, 2, KEY_F9),
+	KEY(1, 2, KEY_3),
+	KEY(2, 2, KEY_6),
+	KEY(3, 2, KEY_9),
+	KEY(4, 2, KEY_KPDOT),
+	KEY(0, 3, KEY_BACK),
+	KEY(1, 3, KEY_2),
+	KEY(2, 3, KEY_5),
+	KEY(3, 3, KEY_8),
+	KEY(4, 3, KEY_0),
+	KEY(5, 3, KEY_KPSLASH),
+	KEY(0, 4, KEY_HOME),
+	KEY(1, 4, KEY_1),
+	KEY(2, 4, KEY_4),
+	KEY(3, 4, KEY_7),
+	KEY(4, 4, KEY_KPASTERISK),
+	KEY(5, 4, KEY_POWER),
 };
 
 static struct smc91x_platdata smc91x_info = {
@@ -120,6 +119,15 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static void __init fsample_init_smc91x(void)
+{
+	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+		   H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+}
+
 static struct mtd_partition nor_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -244,11 +252,15 @@ static struct resource kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data fsample_keymap_data = {
+	.keymap		= fsample_keymap,
+	.keymap_size	= ARRAY_SIZE(fsample_keymap),
+};
+
 static struct omap_kp_platform_data kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= fsample_keymap,
-	.keymapsize	= ARRAY_SIZE(fsample_keymap),
+	.keymap_data	= &fsample_keymap_data,
 	.delay		= 4,
 };
 
@@ -285,6 +297,8 @@ static struct omap_board_config_kernel fsample_config[] = {
 
 static void __init omap_fsample_init(void)
 {
+	fsample_init_smc91x();
+
 	if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
 	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
@@ -312,21 +326,10 @@ static void __init omap_fsample_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init fsample_init_smc91x(void)
-{
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
 static void __init omap_fsample_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	fsample_init_smc91x();
 }
 
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 197adb49dc5..28b84aa9bdb 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -52,43 +52,42 @@
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define OMAP1610_ETHR_START		0x04000300
 
-static int h2_keymap[] = {
+static const unsigned int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_F10),
-	KEY(0, 4, KEY_F5),
-	KEY(0, 5, KEY_9),
-	KEY(1, 0, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_3),
+	KEY(3, 0, KEY_F10),
+	KEY(4, 0, KEY_F5),
+	KEY(5, 0, KEY_9),
+	KEY(0, 1, KEY_DOWN),
 	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_2),
-	KEY(1, 3, KEY_F9),
-	KEY(1, 4, KEY_F7),
-	KEY(1, 5, KEY_0),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_6),
+	KEY(2, 1, KEY_2),
+	KEY(3, 1, KEY_F9),
+	KEY(4, 1, KEY_F7),
+	KEY(5, 1, KEY_0),
+	KEY(0, 2, KEY_ENTER),
+	KEY(1, 2, KEY_6),
 	KEY(2, 2, KEY_1),
-	KEY(2, 3, KEY_F2),
-	KEY(2, 4, KEY_F6),
-	KEY(2, 5, KEY_HOME),
-	KEY(3, 0, KEY_8),
-	KEY(3, 1, KEY_5),
-	KEY(3, 2, KEY_F12),
+	KEY(3, 2, KEY_F2),
+	KEY(4, 2, KEY_F6),
+	KEY(5, 2, KEY_HOME),
+	KEY(0, 3, KEY_8),
+	KEY(1, 3, KEY_5),
+	KEY(2, 3, KEY_F12),
 	KEY(3, 3, KEY_F3),
-	KEY(3, 4, KEY_F8),
-	KEY(3, 5, KEY_END),
-	KEY(4, 0, KEY_7),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_F11),
-	KEY(4, 3, KEY_F1),
+	KEY(4, 3, KEY_F8),
+	KEY(5, 3, KEY_END),
+	KEY(0, 4, KEY_7),
+	KEY(1, 4, KEY_4),
+	KEY(2, 4, KEY_F11),
+	KEY(3, 4, KEY_F1),
 	KEY(4, 4, KEY_F4),
-	KEY(4, 5, KEY_ESC),
-	KEY(5, 0, KEY_F13),
-	KEY(5, 1, KEY_F14),
-	KEY(5, 2, KEY_F15),
-	KEY(5, 3, KEY_F16),
-	KEY(5, 4, KEY_SLEEP),
-	0
+	KEY(5, 4, KEY_ESC),
+	KEY(0, 5, KEY_F13),
+	KEY(1, 5, KEY_F14),
+	KEY(2, 5, KEY_F15),
+	KEY(3, 5, KEY_F16),
+	KEY(4, 5, KEY_SLEEP),
 };
 
 static struct mtd_partition h2_nor_partitions[] = {
@@ -270,14 +269,18 @@ static struct resource h2_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data h2_keymap_data = {
+	.keymap		= h2_keymap,
+	.keymap_size	= ARRAY_SIZE(h2_keymap),
+};
+
 static struct omap_kp_platform_data h2_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= h2_keymap,
-	.keymapsize	= ARRAY_SIZE(h2_keymap),
-	.rep		= 1,
+	.keymap_data	= &h2_keymap_data,
+	.rep		= true,
 	.delay		= 9,
-	.dbounce	= 1,
+	.dbounce	= true,
 };
 
 static struct platform_device h2_kp_device = {
@@ -374,8 +377,6 @@ static void __init h2_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	h2_init_smc91x();
 }
 
 static struct omap_usb_config h2_usb_config __initdata = {
@@ -403,6 +404,8 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 
 static void __init h2_init(void)
 {
+	h2_init_smc91x();
+
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
 	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
 	 * notice whether a NAND chip is enabled at probe time.
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 9126e3e37b4..dbc8b8d882b 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -56,43 +56,42 @@
 
 #define H3_TS_GPIO	48
 
-static int h3_keymap[] = {
+static const unsigned int h3_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_F10),
-	KEY(0, 4, KEY_F5),
-	KEY(0, 5, KEY_9),
-	KEY(1, 0, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_3),
+	KEY(3, 0, KEY_F10),
+	KEY(4, 0, KEY_F5),
+	KEY(5, 0, KEY_9),
+	KEY(0, 1, KEY_DOWN),
 	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_2),
-	KEY(1, 3, KEY_F9),
-	KEY(1, 4, KEY_F7),
-	KEY(1, 5, KEY_0),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_6),
+	KEY(2, 1, KEY_2),
+	KEY(3, 1, KEY_F9),
+	KEY(4, 1, KEY_F7),
+	KEY(5, 1, KEY_0),
+	KEY(0, 2, KEY_ENTER),
+	KEY(1, 2, KEY_6),
 	KEY(2, 2, KEY_1),
-	KEY(2, 3, KEY_F2),
-	KEY(2, 4, KEY_F6),
-	KEY(2, 5, KEY_HOME),
-	KEY(3, 0, KEY_8),
-	KEY(3, 1, KEY_5),
-	KEY(3, 2, KEY_F12),
+	KEY(3, 2, KEY_F2),
+	KEY(4, 2, KEY_F6),
+	KEY(5, 2, KEY_HOME),
+	KEY(0, 3, KEY_8),
+	KEY(1, 3, KEY_5),
+	KEY(2, 3, KEY_F12),
 	KEY(3, 3, KEY_F3),
-	KEY(3, 4, KEY_F8),
-	KEY(3, 5, KEY_END),
-	KEY(4, 0, KEY_7),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_F11),
-	KEY(4, 3, KEY_F1),
+	KEY(4, 3, KEY_F8),
+	KEY(5, 3, KEY_END),
+	KEY(0, 4, KEY_7),
+	KEY(1, 4, KEY_4),
+	KEY(2, 4, KEY_F11),
+	KEY(3, 4, KEY_F1),
 	KEY(4, 4, KEY_F4),
-	KEY(4, 5, KEY_ESC),
-	KEY(5, 0, KEY_F13),
-	KEY(5, 1, KEY_F14),
-	KEY(5, 2, KEY_F15),
-	KEY(5, 3, KEY_F16),
-	KEY(5, 4, KEY_SLEEP),
-	0
+	KEY(5, 4, KEY_ESC),
+	KEY(0, 5, KEY_F13),
+	KEY(1, 5, KEY_F14),
+	KEY(2, 5, KEY_F15),
+	KEY(3, 5, KEY_F16),
+	KEY(4, 5, KEY_SLEEP),
 };
 
 
@@ -264,6 +263,15 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static void __init h3_init_smc91x(void)
+{
+	omap_cfg_reg(W15_1710_GPIO40);
+	if (gpio_request(40, "SMC91x irq") < 0) {
+		printk("Error requesting gpio 40 for smc91x irq\n");
+		return;
+	}
+}
+
 #define GPTIMER_BASE		0xFFFB1400
 #define GPTIMER_REGS(x)	(0xFFFB1400 + (x * 0x800))
 #define GPTIMER_REGS_SIZE	0x46
@@ -296,14 +304,18 @@ static struct resource h3_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data h3_keymap_data = {
+	.keymap		= h3_keymap,
+	.keymap_size	= ARRAY_SIZE(h3_keymap),
+};
+
 static struct omap_kp_platform_data h3_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= h3_keymap,
-	.keymapsize	= ARRAY_SIZE(h3_keymap),
-	.rep		= 1,
+	.keymap_data	= &h3_keymap_data,
+	.rep		= true,
 	.delay		= 9,
-	.dbounce	= 1,
+	.dbounce	= true,
 };
 
 static struct platform_device h3_kp_device = {
@@ -376,6 +388,8 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
 
 static void __init h3_init(void)
 {
+	h3_init_smc91x();
+
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
 	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
 	 * notice whether a NAND chip is enabled at probe time.
@@ -422,21 +436,10 @@ static void __init h3_init(void)
 	h3_mmc_init();
 }
 
-static void __init h3_init_smc91x(void)
-{
-	omap_cfg_reg(W15_1710_GPIO40);
-	if (gpio_request(40, "SMC91x irq") < 0) {
-		printk("Error requesting gpio 40 for smc91x irq\n");
-		return;
-	}
-}
-
 static void __init h3_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	h3_init_smc91x();
 }
 
 static void __init h3_map_io(void)
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 071af3e4778..f2c5c585bc8 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -180,64 +180,68 @@
 
 /* Keyboard definition */
 
-static int htc_herald_keymap[] = {
+static const unsigned int htc_herald_keymap[] = {
 	KEY(0, 0, KEY_RECORD), /* Mail button */
-	KEY(0, 1, KEY_CAMERA), /* Camera */
-	KEY(0, 2, KEY_PHONE), /* Send key */
-	KEY(0, 3, KEY_VOLUMEUP), /* Volume up */
-	KEY(0, 4, KEY_F2),  /* Right bar (landscape) */
-	KEY(0, 5, KEY_MAIL), /* Win key (portrait) */
-	KEY(0, 6, KEY_DIRECTORY), /* Right bar (protrait) */
-	KEY(1, 0, KEY_LEFTCTRL), /* Windows key */
+	KEY(1, 0, KEY_CAMERA), /* Camera */
+	KEY(2, 0, KEY_PHONE), /* Send key */
+	KEY(3, 0, KEY_VOLUMEUP), /* Volume up */
+	KEY(4, 0, KEY_F2),  /* Right bar (landscape) */
+	KEY(5, 0, KEY_MAIL), /* Win key (portrait) */
+	KEY(6, 0, KEY_DIRECTORY), /* Right bar (protrait) */
+	KEY(0, 1, KEY_LEFTCTRL), /* Windows key */
 	KEY(1, 1, KEY_COMMA),
-	KEY(1, 2, KEY_M),
-	KEY(1, 3, KEY_K),
-	KEY(1, 4, KEY_SLASH), /* OK key */
-	KEY(1, 5, KEY_I),
-	KEY(1, 6, KEY_U),
-	KEY(2, 0, KEY_LEFTALT),
-	KEY(2, 1, KEY_TAB),
+	KEY(2, 1, KEY_M),
+	KEY(3, 1, KEY_K),
+	KEY(4, 1, KEY_SLASH), /* OK key */
+	KEY(5, 1, KEY_I),
+	KEY(6, 1, KEY_U),
+	KEY(0, 2, KEY_LEFTALT),
+	KEY(1, 2, KEY_TAB),
 	KEY(2, 2, KEY_N),
-	KEY(2, 3, KEY_J),
-	KEY(2, 4, KEY_ENTER),
-	KEY(2, 5, KEY_H),
-	KEY(2, 6, KEY_Y),
-	KEY(3, 0, KEY_SPACE),
-	KEY(3, 1, KEY_L),
-	KEY(3, 2, KEY_B),
+	KEY(3, 2, KEY_J),
+	KEY(4, 2, KEY_ENTER),
+	KEY(5, 2, KEY_H),
+	KEY(6, 2, KEY_Y),
+	KEY(0, 3, KEY_SPACE),
+	KEY(1, 3, KEY_L),
+	KEY(2, 3, KEY_B),
 	KEY(3, 3, KEY_V),
-	KEY(3, 4, KEY_BACKSPACE),
-	KEY(3, 5, KEY_G),
-	KEY(3, 6, KEY_T),
-	KEY(4, 0, KEY_CAPSLOCK), /* Shift */
-	KEY(4, 1, KEY_C),
-	KEY(4, 2, KEY_F),
-	KEY(4, 3, KEY_R),
+	KEY(4, 3, KEY_BACKSPACE),
+	KEY(5, 3, KEY_G),
+	KEY(6, 3, KEY_T),
+	KEY(0, 4, KEY_CAPSLOCK), /* Shift */
+	KEY(1, 4, KEY_C),
+	KEY(2, 4, KEY_F),
+	KEY(3, 4, KEY_R),
 	KEY(4, 4, KEY_O),
-	KEY(4, 5, KEY_E),
-	KEY(4, 6, KEY_D),
-	KEY(5, 0, KEY_X),
-	KEY(5, 1, KEY_Z),
-	KEY(5, 2, KEY_S),
-	KEY(5, 3, KEY_W),
-	KEY(5, 4, KEY_P),
+	KEY(5, 4, KEY_E),
+	KEY(6, 4, KEY_D),
+	KEY(0, 5, KEY_X),
+	KEY(1, 5, KEY_Z),
+	KEY(2, 5, KEY_S),
+	KEY(3, 5, KEY_W),
+	KEY(4, 5, KEY_P),
 	KEY(5, 5, KEY_Q),
-	KEY(5, 6, KEY_A),
-	KEY(6, 0, KEY_CONNECT), /* Voice button */
-	KEY(6, 2, KEY_CANCEL), /* End key */
-	KEY(6, 3, KEY_VOLUMEDOWN), /* Volume down */
-	KEY(6, 4, KEY_F1), /* Left bar (landscape) */
-	KEY(6, 5, KEY_WWW), /* OK button (portrait) */
+	KEY(6, 5, KEY_A),
+	KEY(0, 6, KEY_CONNECT), /* Voice button */
+	KEY(2, 6, KEY_CANCEL), /* End key */
+	KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */
+	KEY(4, 6, KEY_F1), /* Left bar (landscape) */
+	KEY(5, 6, KEY_WWW), /* OK button (portrait) */
 	KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
-	0
 };
 
-struct omap_kp_platform_data htcherald_kp_data = {
+static const struct matrix_keymap_data htc_herald_keymap_data = {
+	.keymap		= htc_herald_keymap,
+	.keymap_size	= ARRAY_SIZE(htc_herald_keymap),
+};
+
+static struct omap_kp_platform_data htcherald_kp_data = {
 	.rows	= 7,
 	.cols	= 7,
 	.delay = 20,
-	.rep = 1,
-	.keymap = htc_herald_keymap,
+	.rep = true,
+	.keymap_data = &htc_herald_keymap_data,
 };
 
 static struct resource kp_resources[] = {
@@ -278,7 +282,7 @@ static struct gpio_keys_button herald_gpio_keys_table[] = {
 static struct gpio_keys_platform_data herald_gpio_keys_data = {
 	.buttons	= herald_gpio_keys_table,
 	.nbuttons	= ARRAY_SIZE(herald_gpio_keys_table),
-	.rep		= 1,
+	.rep		= true,
 };
 
 static struct platform_device herald_gpiokeys_device = {
@@ -439,7 +443,7 @@ static const struct ads7846_platform_data htcherald_ts_platform_data = {
 	.keep_vref_on		= 1,
 	.x_plate_ohms		= 496,
 	.gpio_pendown		= HTCHERALD_GPIO_TS,
-	.pressure_max		= 100000,
+	.pressure_max		= 10000,
 	.pressure_min		= 5000,
 	.x_min			= 528,
 	.x_max			= 3760,
@@ -577,8 +581,6 @@ static void __init htcherald_init(void)
 	printk(KERN_INFO "HTC Herald init.\n");
 
 	/* Do board initialization before we register all the devices */
-	omap_gpio_init();
-
 	omap_board_config = htcherald_config;
 	omap_board_config_size = ARRAY_SIZE(htcherald_config);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index dc2b86fd66c..a36e6742bf9 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -44,17 +44,16 @@
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START	0x04000300
 
-static int innovator_keymap[] = {
+static const unsigned int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
-	KEY(0, 3, KEY_DOWN),
+	KEY(3, 0, KEY_DOWN),
 	KEY(1, 1, KEY_F2),
-	KEY(1, 2, KEY_RIGHT),
-	KEY(2, 0, KEY_F3),
-	KEY(2, 1, KEY_F4),
+	KEY(2, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_F3),
+	KEY(1, 2, KEY_F4),
 	KEY(2, 2, KEY_UP),
-	KEY(3, 2, KEY_ENTER),
+	KEY(2, 3, KEY_ENTER),
 	KEY(3, 3, KEY_LEFT),
-	0
 };
 
 static struct mtd_partition innovator_partitions[] = {
@@ -126,11 +125,15 @@ static struct resource innovator_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data innovator_keymap_data = {
+	.keymap		= innovator_keymap,
+	.keymap_size	= ARRAY_SIZE(innovator_keymap),
+};
+
 static struct omap_kp_platform_data innovator_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= innovator_keymap,
-	.keymapsize	= ARRAY_SIZE(innovator_keymap),
+	.keymap_data	= &innovator_keymap_data,
 	.delay		= 4,
 };
 
@@ -290,13 +293,6 @@ static void __init innovator_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap1510()) {
-		omap1510_fpga_init_irq();
-	}
-#endif
-	innovator_init_smc91x();
 }
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -387,6 +383,10 @@ static struct omap_board_config_kernel innovator_config[] = {
 
 static void __init innovator_init(void)
 {
+	if (cpu_is_omap1510())
+		omap1510_fpga_init_irq();
+	innovator_init_smc91x();
+
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		unsigned char reg;
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index aa8375b2a0a..d21f09dc78f 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -54,19 +54,18 @@ static void __init omap_nokia770_init_irq(void)
 	omap_init_irq();
 }
 
-static int nokia770_keymap[] = {
-	KEY(0, 1, GROUP_0 | KEY_UP),
-	KEY(0, 2, GROUP_1 | KEY_F5),
-	KEY(1, 0, GROUP_0 | KEY_LEFT),
+static const unsigned int nokia770_keymap[] = {
+	KEY(1, 0, GROUP_0 | KEY_UP),
+	KEY(2, 0, GROUP_1 | KEY_F5),
+	KEY(0, 1, GROUP_0 | KEY_LEFT),
 	KEY(1, 1, GROUP_0 | KEY_ENTER),
-	KEY(1, 2, GROUP_0 | KEY_RIGHT),
-	KEY(2, 0, GROUP_1 | KEY_ESC),
-	KEY(2, 1, GROUP_0 | KEY_DOWN),
+	KEY(2, 1, GROUP_0 | KEY_RIGHT),
+	KEY(0, 2, GROUP_1 | KEY_ESC),
+	KEY(1, 2, GROUP_0 | KEY_DOWN),
 	KEY(2, 2, GROUP_1 | KEY_F4),
-	KEY(3, 0, GROUP_2 | KEY_F7),
-	KEY(3, 1, GROUP_2 | KEY_F8),
-	KEY(3, 2, GROUP_2 | KEY_F6),
-	0
+	KEY(0, 3, GROUP_2 | KEY_F7),
+	KEY(1, 3, GROUP_2 | KEY_F8),
+	KEY(2, 3, GROUP_2 | KEY_F6),
 };
 
 static struct resource nokia770_kp_resources[] = {
@@ -77,11 +76,15 @@ static struct resource nokia770_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data nokia770_keymap_data = {
+	.keymap		= nokia770_keymap,
+	.keymap_size	= ARRAY_SIZE(nokia770_keymap),
+};
+
 static struct omap_kp_platform_data nokia770_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= nokia770_keymap,
-	.keymapsize	= ARRAY_SIZE(nokia770_keymap),
+	.keymap_data	= &nokia770_keymap_data,
 	.delay		= 4,
 };
 
@@ -246,7 +249,6 @@ static void __init omap_nokia770_init(void)
 	platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices));
 	spi_register_board_info(nokia770_spi_board_info,
 				ARRAY_SIZE(nokia770_spi_board_info));
-	omap_gpio_init();
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	hwa742_dev_init();
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index e9dd79149a8..7c5e2112c77 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -283,9 +283,6 @@ static void __init osk_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	osk_init_smc91x();
-	osk_init_cf();
 }
 
 static struct omap_usb_config osk_usb_config __initdata = {
@@ -341,25 +338,28 @@ static struct i2c_board_info __initdata mistral_i2c_board_info[] = {
 	 */
 };
 
-static const int osk_keymap[] = {
+static const unsigned int osk_keymap[] = {
 	/* KEY(col, row, code) */
 	KEY(0, 0, KEY_F1),		/* SW4 */
-	KEY(0, 3, KEY_UP),		/* (sw2/up) */
+	KEY(3, 0, KEY_UP),		/* (sw2/up) */
 	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
-	KEY(1, 2, KEY_LEFT),		/* (sw2/left) */
-	KEY(2, 0, KEY_SPACE),		/* SW3 */
-	KEY(2, 1, KEY_ESC),		/* SW6 */
+	KEY(2, 1, KEY_LEFT),		/* (sw2/left) */
+	KEY(0, 2, KEY_SPACE),		/* SW3 */
+	KEY(1, 2, KEY_ESC),		/* SW6 */
 	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
-	KEY(3, 2, KEY_ENTER),		/* (sw2/select) */
+	KEY(2, 3, KEY_ENTER),		/* (sw2/select) */
 	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
-	0
+};
+
+static const struct matrix_keymap_data osk_keymap_data = {
+	.keymap		= osk_keymap,
+	.keymap_size	= ARRAY_SIZE(osk_keymap),
 };
 
 static struct omap_kp_platform_data osk_kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= (int *) osk_keymap,
-	.keymapsize	= ARRAY_SIZE(osk_keymap),
+	.keymap_data	= &osk_keymap_data,
 	.delay		= 9,
 };
 
@@ -541,6 +541,9 @@ static void __init osk_init(void)
 {
 	u32 l;
 
+	osk_init_smc91x();
+	osk_init_cf();
+
 	/* Workaround for wrong CS3 (NOR flash) timing
 	 * There are some U-Boot versions out there which configure
 	 * wrong CS3 memory timings. This mainly leads to CRC
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index f32738b1eb6..fb51ce6123d 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -63,28 +63,31 @@ static void __init omap_palmte_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 
-static const int palmte_keymap[] = {
+static const unsigned int palmte_keymap[] = {
 	KEY(0, 0, KEY_F1),		/* Calendar */
-	KEY(0, 1, KEY_F2),		/* Contacts */
-	KEY(0, 2, KEY_F3),		/* Tasks List */
-	KEY(0, 3, KEY_F4),		/* Note Pad */
-	KEY(0, 4, KEY_POWER),
-	KEY(1, 0, KEY_LEFT),
+	KEY(1, 0, KEY_F2),		/* Contacts */
+	KEY(2, 0, KEY_F3),		/* Tasks List */
+	KEY(3, 0, KEY_F4),		/* Note Pad */
+	KEY(4, 0, KEY_POWER),
+	KEY(0, 1, KEY_LEFT),
 	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_UP),
-	KEY(1, 3, KEY_RIGHT),
-	KEY(1, 4, KEY_ENTER),
-	0,
+	KEY(2, 1, KEY_UP),
+	KEY(3, 1, KEY_RIGHT),
+	KEY(4, 1, KEY_ENTER),
+};
+
+static const struct matrix_keymap_data palmte_keymap_data = {
+	.keymap		= palmte_keymap,
+	.keymap_size	= ARRAY_SIZE(palmte_keymap),
 };
 
 static struct omap_kp_platform_data palmte_kp_data = {
 	.rows	= 8,
 	.cols	= 8,
-	.keymap = (int *) palmte_keymap,
-	.rep	= 1,
+	.keymap_data = &palmte_keymap_data,
+	.rep	= true,
 	.delay	= 12,
 };
 
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index ed1400a67f7..f04f2d36e7d 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -51,19 +51,18 @@
 #define PALMTT_MMC_WP_GPIO	8
 #define PALMTT_HDQ_GPIO		11
 
-static int palmtt_keymap[] = {
+static const unsigned int palmtt_keymap[] = {
 	KEY(0, 0, KEY_ESC),
-	KEY(0, 1, KEY_SPACE),
-	KEY(0, 2, KEY_LEFTCTRL),
-	KEY(0, 3, KEY_TAB),
-	KEY(0, 4, KEY_ENTER),
-	KEY(1, 0, KEY_LEFT),
+	KEY(1, 0, KEY_SPACE),
+	KEY(2, 0, KEY_LEFTCTRL),
+	KEY(3, 0, KEY_TAB),
+	KEY(4, 0, KEY_ENTER),
+	KEY(0, 1, KEY_LEFT),
 	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_UP),
-	KEY(1, 3, KEY_RIGHT),
-	KEY(2, 0, KEY_SLEEP),
-	KEY(2, 4, KEY_Y),
-	0
+	KEY(2, 1, KEY_UP),
+	KEY(3, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_SLEEP),
+	KEY(4, 2, KEY_Y),
 };
 
 static struct mtd_partition palmtt_partitions[] = {
@@ -136,10 +135,15 @@ static struct resource palmtt_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data palmtt_keymap_data = {
+	.keymap		= palmtt_keymap,
+	.keymap_size	= ARRAY_SIZE(palmtt_keymap),
+};
+
 static struct omap_kp_platform_data palmtt_kp_data = {
 	.rows	= 6,
 	.cols	= 3,
-	.keymap = palmtt_keymap,
+	.keymap_data = &palmtt_keymap_data,
 };
 
 static struct platform_device palmtt_kp_device = {
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index d7a245cef9a..d7bbbe721a7 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -62,29 +62,32 @@ omap_palmz71_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 
-static int palmz71_keymap[] = {
+static const unsigned int palmz71_keymap[] = {
 	KEY(0, 0, KEY_F1),
-	KEY(0, 1, KEY_F2),
-	KEY(0, 2, KEY_F3),
-	KEY(0, 3, KEY_F4),
-	KEY(0, 4, KEY_POWER),
-	KEY(1, 0, KEY_LEFT),
+	KEY(1, 0, KEY_F2),
+	KEY(2, 0, KEY_F3),
+	KEY(3, 0, KEY_F4),
+	KEY(4, 0, KEY_POWER),
+	KEY(0, 1, KEY_LEFT),
 	KEY(1, 1, KEY_DOWN),
-	KEY(1, 2, KEY_UP),
-	KEY(1, 3, KEY_RIGHT),
-	KEY(1, 4, KEY_ENTER),
-	KEY(2, 0, KEY_CAMERA),
-	0,
+	KEY(2, 1, KEY_UP),
+	KEY(3, 1, KEY_RIGHT),
+	KEY(4, 1, KEY_ENTER),
+	KEY(0, 2, KEY_CAMERA),
+};
+
+static const struct matrix_keymap_data palmz71_keymap_data = {
+	.keymap		= palmz71_keymap,
+	.keymap_size	= ARRAY_SIZE(palmz71_keymap),
 };
 
 static struct omap_kp_platform_data palmz71_kp_data = {
 	.rows	= 8,
 	.cols	= 8,
-	.keymap	= palmz71_keymap,
-	.rep	= 1,
+	.keymap_data	= &palmz71_keymap_data,
+	.rep	= true,
 	.delay	= 80,
 };
 
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index a8d16a255c1..3c8ee848945 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -36,36 +36,35 @@
 #include <plat/common.h>
 #include <plat/board.h>
 
-static int p2_keymap[] = {
-	KEY(0,0,KEY_UP),
-	KEY(0,1,KEY_RIGHT),
-	KEY(0,2,KEY_LEFT),
-	KEY(0,3,KEY_DOWN),
-	KEY(0,4,KEY_ENTER),
-	KEY(1,0,KEY_F10),
-	KEY(1,1,KEY_SEND),
-	KEY(1,2,KEY_END),
-	KEY(1,3,KEY_VOLUMEDOWN),
-	KEY(1,4,KEY_VOLUMEUP),
-	KEY(1,5,KEY_RECORD),
-	KEY(2,0,KEY_F9),
-	KEY(2,1,KEY_3),
-	KEY(2,2,KEY_6),
-	KEY(2,3,KEY_9),
-	KEY(2,4,KEY_KPDOT),
-	KEY(3,0,KEY_BACK),
-	KEY(3,1,KEY_2),
-	KEY(3,2,KEY_5),
-	KEY(3,3,KEY_8),
-	KEY(3,4,KEY_0),
-	KEY(3,5,KEY_KPSLASH),
-	KEY(4,0,KEY_HOME),
-	KEY(4,1,KEY_1),
-	KEY(4,2,KEY_4),
-	KEY(4,3,KEY_7),
-	KEY(4,4,KEY_KPASTERISK),
-	KEY(4,5,KEY_POWER),
-	0
+static const unsigned int p2_keymap[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_LEFT),
+	KEY(3, 0, KEY_DOWN),
+	KEY(4, 0, KEY_ENTER),
+	KEY(0, 1, KEY_F10),
+	KEY(1, 1, KEY_SEND),
+	KEY(2, 1, KEY_END),
+	KEY(3, 1, KEY_VOLUMEDOWN),
+	KEY(4, 1, KEY_VOLUMEUP),
+	KEY(5, 1, KEY_RECORD),
+	KEY(0, 2, KEY_F9),
+	KEY(1, 2, KEY_3),
+	KEY(2, 2, KEY_6),
+	KEY(3, 2, KEY_9),
+	KEY(4, 2, KEY_KPDOT),
+	KEY(0, 3, KEY_BACK),
+	KEY(1, 3, KEY_2),
+	KEY(2, 3, KEY_5),
+	KEY(3, 3, KEY_8),
+	KEY(4, 3, KEY_0),
+	KEY(5, 3, KEY_KPSLASH),
+	KEY(0, 4, KEY_HOME),
+	KEY(1, 4, KEY_1),
+	KEY(2, 4, KEY_4),
+	KEY(3, 4, KEY_7),
+	KEY(4, 4, KEY_KPASTERISK),
+	KEY(5, 4, KEY_POWER),
 };
 
 static struct smc91x_platdata smc91x_info = {
@@ -211,13 +210,17 @@ static struct resource kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data p2_keymap_data = {
+	.keymap		= p2_keymap,
+	.keymap_size	= ARRAY_SIZE(p2_keymap),
+};
+
 static struct omap_kp_platform_data kp_data = {
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= p2_keymap,
-	.keymapsize	= ARRAY_SIZE(p2_keymap),
+	.keymap_data	= &p2_keymap_data,
 	.delay		= 4,
-	.dbounce	= 1,
+	.dbounce	= true,
 };
 
 static struct platform_device kp_device = {
@@ -251,8 +254,19 @@ static struct omap_board_config_kernel perseus2_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
 };
 
+static void __init perseus2_init_smc91x(void)
+{
+	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+		   H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+}
+
 static void __init omap_perseus2_init(void)
 {
+	perseus2_init_smc91x();
+
 	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
 	gpio_direction_input(P2_NAND_RB_GPIO_PIN);
@@ -280,21 +294,10 @@ static void __init omap_perseus2_init(void)
 	omap_register_i2c_bus(1, 100, NULL, 0);
 }
 
-static void __init perseus2_init_smc91x(void)
-{
-	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
-		   H2P2_DBG_FPGA_LAN_RESET);
-	mdelay(50);
-}
-
 static void __init omap_perseus2_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
-	perseus2_init_smc91x();
 }
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index d25f59e5a77..d41fe2d0616 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -164,36 +164,35 @@ EXPORT_SYMBOL(sx1_setusbpower);
 
 /*----------- Keypad -------------------------*/
 
-static int sx1_keymap[] = {
-	KEY(5, 3, GROUP_0 | 117), /* camera Qt::Key_F17 */
-	KEY(0, 4, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
-	KEY(1, 4, GROUP_2 | 114), /* voice memo */
-	KEY(2, 4, GROUP_3 | 114), /* voice memo */
+static const unsigned int sx1_keymap[] = {
+	KEY(3, 5, GROUP_0 | 117), /* camera Qt::Key_F17 */
+	KEY(4, 0, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
+	KEY(4, 1, GROUP_2 | 114), /* voice memo */
+	KEY(4, 2, GROUP_3 | 114), /* voice memo */
 	KEY(0, 0, GROUP_1 | KEY_F12),	/* red button Qt::Key_Hangup */
-	KEY(4, 3, GROUP_1 | KEY_LEFT),
-	KEY(2, 3, GROUP_1 | KEY_DOWN),
-	KEY(1, 3, GROUP_1 | KEY_RIGHT),
-	KEY(0, 3, GROUP_1 | KEY_UP),
+	KEY(3, 4, GROUP_1 | KEY_LEFT),
+	KEY(3, 2, GROUP_1 | KEY_DOWN),
+	KEY(3, 1, GROUP_1 | KEY_RIGHT),
+	KEY(3, 0, GROUP_1 | KEY_UP),
 	KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */
-	KEY(5, 0, GROUP_1 | KEY_1),
-	KEY(4, 0, GROUP_1 | KEY_2),
-	KEY(3, 0, GROUP_1 | KEY_3),
-	KEY(3, 4, GROUP_1 | KEY_4),
+	KEY(0, 5, GROUP_1 | KEY_1),
+	KEY(0, 4, GROUP_1 | KEY_2),
+	KEY(0, 3, GROUP_1 | KEY_3),
+	KEY(4, 3, GROUP_1 | KEY_4),
 	KEY(4, 4, GROUP_1 | KEY_5),
-	KEY(5, 4, GROUP_1 | KEY_KPASTERISK),/* "*" */
-	KEY(4, 1, GROUP_1 | KEY_6),
-	KEY(5, 1, GROUP_1 | KEY_7),
-	KEY(3, 1, GROUP_1 | KEY_8),
-	KEY(3, 2, GROUP_1 | KEY_9),
-	KEY(5, 2, GROUP_1 | KEY_0),
-	KEY(4, 2, GROUP_1 | 113),	/* # F13 Toggle input method Qt::Key_F13 */
-	KEY(0, 1, GROUP_1 | KEY_F11),	/* green button Qt::Key_Call */
-	KEY(1, 2, GROUP_1 | KEY_YEN),	/* left soft Qt::Key_Context1 */
+	KEY(4, 5, GROUP_1 | KEY_KPASTERISK),/* "*" */
+	KEY(1, 4, GROUP_1 | KEY_6),
+	KEY(1, 5, GROUP_1 | KEY_7),
+	KEY(1, 3, GROUP_1 | KEY_8),
+	KEY(2, 3, GROUP_1 | KEY_9),
+	KEY(2, 5, GROUP_1 | KEY_0),
+	KEY(2, 4, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */
+	KEY(1, 0, GROUP_1 | KEY_F11),	/* green button Qt::Key_Call */
+	KEY(2, 1, GROUP_1 | KEY_YEN),	/* left soft Qt::Key_Context1 */
 	KEY(2, 2, GROUP_1 | KEY_F8),	/* right soft Qt::Key_Back */
-	KEY(2, 1, GROUP_1 | KEY_LEFTSHIFT), /* shift */
+	KEY(1, 2, GROUP_1 | KEY_LEFTSHIFT), /* shift */
 	KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */
-	KEY(0, 2, GROUP_1 | KEY_F7),	/* menu Qt::Key_Menu */
-	0
+	KEY(2, 0, GROUP_1 | KEY_F7),	/* menu Qt::Key_Menu */
 };
 
 static struct resource sx1_kp_resources[] = {
@@ -204,11 +203,15 @@ static struct resource sx1_kp_resources[] = {
 	},
 };
 
+static const struct matrix_keymap_data sx1_keymap_data = {
+	.keymap		= sx1_keymap,
+	.keymap_size	= ARRAY_SIZE(sx1_keymap),
+};
+
 static struct omap_kp_platform_data sx1_kp_data = {
 	.rows		= 6,
 	.cols		= 6,
-	.keymap	= sx1_keymap,
-	.keymapsize = ARRAY_SIZE(sx1_keymap),
+	.keymap_data	= &sx1_keymap_data,
 	.delay	= 80,
 };
 
@@ -409,7 +412,6 @@ static void __init omap_sx1_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 /*----------------------------------------*/
 
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index f5992c239bc..815a69ce821 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -83,6 +83,9 @@ static struct platform_device serial_device = {
 
 static int __init ext_uart_init(void)
 {
+	if (!machine_is_voiceblue())
+		return -ENODEV;
+
 	return platform_device_register(&serial_device);
 }
 arch_initcall(ext_uart_init);
@@ -158,7 +161,6 @@ static void __init voiceblue_init_irq(void)
 {
 	omap1_init_common_hw();
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static void __init voiceblue_init(void)
@@ -236,6 +238,9 @@ static struct notifier_block panic_block = {
 
 static int __init voiceblue_setup(void)
 {
+	if (!machine_is_voiceblue())
+		return -ENODEV;
+
 	/* Setup panic notifier */
 	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
 
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index b8c7fb9d792..84ef70476b5 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -17,9 +17,9 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/clkdev.h>
 
 #include <asm/mach-types.h>
-#include <asm/clkdev.h>
 
 #include <plat/cpu.h>
 #include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index af54114b8f0..92400b9eb69 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -143,7 +143,7 @@ static struct arm_idlect1_clk armper_ck = {
  * activation.  [ GPIO code for 1510 ]
  */
 static struct clk arm_gpio_ck = {
-	.name		= "arm_gpio_ck",
+	.name		= "ick",
 	.ops		= &clkops_generic,
 	.parent		= &ck_dpll1,
 	.flags		= ENABLE_ON_INIT,
@@ -684,7 +684,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
 	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
+	CLK("omap_gpio.0", "ick",	&arm_gpio_ck,	CK_1510 | CK_310),
 	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
@@ -736,9 +736,9 @@ static struct omap_clk omap_clks[] = {
 	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
 	/* Virtual clocks */
 	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
-	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
-	CLK("i2c_omap.1", "ick",	&dummy_ck,	CK_1510 | CK_310 | CK_7XX),
+	CLK("omap_i2c.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("omap_i2c.1", "ick",	&i2c_ick,	CK_16XX),
+	CLK("omap_i2c.1", "ick",	&dummy_ck,	CK_1510 | CK_310 | CK_7XX),
 	CLK("omap1_spi100k.1", "fck",	&dummy_ck,	CK_7XX),
 	CLK("omap1_spi100k.1", "ick",	&dummy_ck,	CK_7XX),
 	CLK("omap1_spi100k.2", "fck",	&dummy_ck,	CK_7XX),
@@ -823,12 +823,10 @@ int __init omap1_clk_init(void)
 			crystal_type = info->system_clock_type;
 	}
 
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	ck_ref.rate = 13000000;
-#elif defined(CONFIG_ARCH_OMAP16XX)
-	if (crystal_type == 2)
+	if (cpu_is_omap7xx())
+		ck_ref.rate = 13000000;
+	if (cpu_is_omap16xx() && crystal_type == 2)
 		ck_ref.rate = 19200000;
-#endif
 
 	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
 		"0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
@@ -883,10 +881,11 @@ int __init omap1_clk_init(void)
 	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
 	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
 
-#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
-	/* Select slicer output as OMAP input clock */
-	omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
-#endif
+	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
+		/* Select slicer output as OMAP input clock */
+		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
+				OMAP7XX_PCC_UPLD_CTRL);
+	}
 
 	/* Amstrad Delta wants BCLK high when inactive */
 	if (machine_is_ams_delta())
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index ea0d80a89da..b0f4c231595 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/spi/spi.h>
 
+#include <mach/camera.h>
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
@@ -287,6 +288,9 @@ static inline void omap_init_audio(void) {}
  */
 static int __init omap1_init_devices(void)
 {
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
@@ -321,10 +325,9 @@ static struct platform_device omap_wdt_device = {
 static int __init omap_init_wdt(void)
 {
 	if (!cpu_is_omap16xx())
-		return;
+		return -ENODEV;
 
-	platform_device_register(&omap_wdt_device);
-	return 0;
+	return platform_device_register(&omap_wdt_device);
 }
 subsys_initcall(omap_init_wdt);
 #endif
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
new file mode 100644
index 00000000000..d8559344c6e
--- /dev/null
+++ b/arch/arm/mach-omap1/dma.c
@@ -0,0 +1,390 @@
+/*
+ * OMAP1/OMAP7xx - specific DMA driver
+ *
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Converted DMA library into platform driver
+ *                   - G, Manjunath Kondaiah <manjugk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/irqs.h>
+
+#define OMAP1_DMA_BASE			(0xfffed800)
+#define OMAP1_LOGICAL_DMA_CH_COUNT	17
+#define OMAP1_DMA_STRIDE		0x40
+
+static u32 errata;
+static u32 enable_1510_mode;
+static u8 dma_stride;
+static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
+
+static u16 reg_map[] = {
+	[GCR]		= 0x400,
+	[GSCR]		= 0x404,
+	[GRST1]		= 0x408,
+	[HW_ID]		= 0x442,
+	[PCH2_ID]	= 0x444,
+	[PCH0_ID]	= 0x446,
+	[PCH1_ID]	= 0x448,
+	[PCHG_ID]	= 0x44a,
+	[PCHD_ID]	= 0x44c,
+	[CAPS_0]	= 0x44e,
+	[CAPS_1]	= 0x452,
+	[CAPS_2]	= 0x456,
+	[CAPS_3]	= 0x458,
+	[CAPS_4]	= 0x45a,
+	[PCH2_SR]	= 0x460,
+	[PCH0_SR]	= 0x480,
+	[PCH1_SR]	= 0x482,
+	[PCHD_SR]	= 0x4c0,
+
+	/* Common Registers */
+	[CSDP]		= 0x00,
+	[CCR]		= 0x02,
+	[CICR]		= 0x04,
+	[CSR]		= 0x06,
+	[CEN]		= 0x10,
+	[CFN]		= 0x12,
+	[CSFI]		= 0x14,
+	[CSEI]		= 0x16,
+	[CPC]		= 0x18,	/* 15xx only */
+	[CSAC]		= 0x18,
+	[CDAC]		= 0x1a,
+	[CDEI]		= 0x1c,
+	[CDFI]		= 0x1e,
+	[CLNK_CTRL]	= 0x28,
+
+	/* Channel specific register offsets */
+	[CSSA]		= 0x08,
+	[CDSA]		= 0x0c,
+	[COLOR]		= 0x20,
+	[CCR2]		= 0x24,
+	[LCH_CTRL]	= 0x2a,
+};
+
+static struct resource res[] __initdata = {
+	[0] = {
+		.start	= OMAP1_DMA_BASE,
+		.end	= OMAP1_DMA_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name   = "0",
+		.start  = INT_DMA_CH0_6,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name   = "1",
+		.start  = INT_DMA_CH1_7,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[3] = {
+		.name   = "2",
+		.start  = INT_DMA_CH2_8,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[4] = {
+		.name   = "3",
+		.start  = INT_DMA_CH3,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[5] = {
+		.name   = "4",
+		.start  = INT_DMA_CH4,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[6] = {
+		.name   = "5",
+		.start  = INT_DMA_CH5,
+		.flags  = IORESOURCE_IRQ,
+	},
+	/* Handled in lcd_dma.c */
+	[7] = {
+		.name   = "6",
+		.start  = INT_1610_DMA_CH6,
+		.flags  = IORESOURCE_IRQ,
+	},
+	/* irq's for omap16xx and omap7xx */
+	[8] = {
+		.name   = "7",
+		.start  = INT_1610_DMA_CH7,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[9] = {
+		.name   = "8",
+		.start  = INT_1610_DMA_CH8,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[10] = {
+		.name  = "9",
+		.start = INT_1610_DMA_CH9,
+		.flags = IORESOURCE_IRQ,
+	},
+	[11] = {
+		.name  = "10",
+		.start = INT_1610_DMA_CH10,
+		.flags = IORESOURCE_IRQ,
+	},
+	[12] = {
+		.name  = "11",
+		.start = INT_1610_DMA_CH11,
+		.flags = IORESOURCE_IRQ,
+	},
+	[13] = {
+		.name  = "12",
+		.start = INT_1610_DMA_CH12,
+		.flags = IORESOURCE_IRQ,
+	},
+	[14] = {
+		.name  = "13",
+		.start = INT_1610_DMA_CH13,
+		.flags = IORESOURCE_IRQ,
+	},
+	[15] = {
+		.name  = "14",
+		.start = INT_1610_DMA_CH14,
+		.flags = IORESOURCE_IRQ,
+	},
+	[16] = {
+		.name  = "15",
+		.start = INT_1610_DMA_CH15,
+		.flags = IORESOURCE_IRQ,
+	},
+	[17] = {
+		.name  = "16",
+		.start = INT_DMA_LCD,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static void __iomem *dma_base;
+static inline void dma_write(u32 val, int reg, int lch)
+{
+	u8  stride;
+	u32 offset;
+
+	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+	offset = reg_map[reg] + (stride * lch);
+
+	__raw_writew(val, dma_base + offset);
+	if ((reg > CLNK_CTRL && reg < CCEN) ||
+			(reg > PCHD_ID && reg < CAPS_2)) {
+		u32 offset2 = reg_map[reg] + 2 + (stride * lch);
+		__raw_writew(val >> 16, dma_base + offset2);
+	}
+}
+
+static inline u32 dma_read(int reg, int lch)
+{
+	u8 stride;
+	u32 offset, val;
+
+	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+	offset = reg_map[reg] + (stride * lch);
+
+	val = __raw_readw(dma_base + offset);
+	if ((reg > CLNK_CTRL && reg < CCEN) ||
+			(reg > PCHD_ID && reg < CAPS_2)) {
+		u16 upper;
+		u32 offset2 = reg_map[reg] + 2 + (stride * lch);
+		upper = __raw_readw(dma_base + offset2);
+		val |= (upper << 16);
+	}
+	return val;
+}
+
+static void omap1_clear_lch_regs(int lch)
+{
+	int i = dma_common_ch_start;
+
+	for (; i <= dma_common_ch_end; i += 1)
+		dma_write(0, i, lch);
+}
+
+static void omap1_clear_dma(int lch)
+{
+	u32 l;
+
+	l = dma_read(CCR, lch);
+	l &= ~OMAP_DMA_CCR_EN;
+	dma_write(l, CCR, lch);
+
+	/* Clear pending interrupts */
+	l = dma_read(CSR, lch);
+}
+
+static void omap1_show_dma_caps(void)
+{
+	if (enable_1510_mode) {
+		printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
+	} else {
+		u16 w;
+		printk(KERN_INFO "OMAP DMA hardware version %d\n",
+							dma_read(HW_ID, 0));
+		printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
+			dma_read(CAPS_0, 0), dma_read(CAPS_1, 0),
+			dma_read(CAPS_2, 0), dma_read(CAPS_3, 0),
+			dma_read(CAPS_4, 0));
+
+		/* Disable OMAP 3.0/3.1 compatibility mode. */
+		w = dma_read(GSCR, 0);
+		w |= 1 << 3;
+		dma_write(w, GSCR, 0);
+	}
+	return;
+}
+
+static u32 configure_dma_errata(void)
+{
+
+	/*
+	 * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
+	 * read before the DMA controller finished disabling the channel.
+	 */
+	if (!cpu_is_omap15xx())
+		SET_DMA_ERRATA(DMA_ERRATA_3_3);
+
+	return errata;
+}
+
+static int __init omap1_system_dma_init(void)
+{
+	struct omap_system_dma_plat_info	*p;
+	struct omap_dma_dev_attr		*d;
+	struct platform_device			*pdev;
+	int ret;
+
+	pdev = platform_device_alloc("omap_dma_system", 0);
+	if (!pdev) {
+		pr_err("%s: Unable to device alloc for dma\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	dma_base = ioremap(res[0].start, resource_size(&res[0]));
+	if (!dma_base) {
+		pr_err("%s: Unable to ioremap\n", __func__);
+		return -ENODEV;
+	}
+
+	ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
+	if (ret) {
+		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
+			__func__, pdev->name, pdev->id);
+		goto exit_device_del;
+	}
+
+	p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
+	if (!p) {
+		dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
+			__func__, pdev->name);
+		ret = -ENOMEM;
+		goto exit_device_put;
+	}
+
+	d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
+	if (!d) {
+		dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n",
+			__func__, pdev->name);
+		ret = -ENOMEM;
+		goto exit_release_p;
+	}
+
+	d->lch_count		= OMAP1_LOGICAL_DMA_CH_COUNT;
+
+	/* Valid attributes for omap1 plus processors */
+	if (cpu_is_omap15xx())
+		d->dev_caps = ENABLE_1510_MODE;
+	enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
+
+	d->dev_caps		|= SRC_PORT;
+	d->dev_caps		|= DST_PORT;
+	d->dev_caps		|= SRC_INDEX;
+	d->dev_caps		|= DST_INDEX;
+	d->dev_caps		|= IS_BURST_ONLY4;
+	d->dev_caps		|= CLEAR_CSR_ON_READ;
+	d->dev_caps		|= IS_WORD_16;
+
+
+	d->chan = kzalloc(sizeof(struct omap_dma_lch) *
+					(d->lch_count), GFP_KERNEL);
+	if (!d->chan) {
+		dev_err(&pdev->dev, "%s: Memory allocation failed"
+					"for d->chan!!!\n", __func__);
+		goto exit_release_d;
+	}
+
+	if (cpu_is_omap15xx())
+		d->chan_count = 9;
+	else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
+		if (!(d->dev_caps & ENABLE_1510_MODE))
+			d->chan_count = 16;
+		else
+			d->chan_count = 9;
+	}
+
+	p->dma_attr = d;
+
+	p->show_dma_caps	= omap1_show_dma_caps;
+	p->clear_lch_regs	= omap1_clear_lch_regs;
+	p->clear_dma		= omap1_clear_dma;
+	p->dma_write		= dma_write;
+	p->dma_read		= dma_read;
+	p->disable_irq_lch	= NULL;
+
+	p->errata = configure_dma_errata();
+
+	ret = platform_device_add_data(pdev, p, sizeof(*p));
+	if (ret) {
+		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
+			__func__, pdev->name, pdev->id);
+		goto exit_release_chan;
+	}
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
+			__func__, pdev->name, pdev->id);
+		goto exit_release_chan;
+	}
+
+	dma_stride		= OMAP1_DMA_STRIDE;
+	dma_common_ch_start	= CPC;
+	dma_common_ch_end	= COLOR;
+
+	return ret;
+
+exit_release_chan:
+	kfree(d->chan);
+exit_release_d:
+	kfree(d);
+exit_release_p:
+	kfree(p);
+exit_device_put:
+	platform_device_put(pdev);
+exit_device_del:
+	platform_device_del(pdev);
+
+	return ret;
+}
+arch_initcall(omap1_system_dma_init);
diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c
index 0b07a78eeaa..acd16166640 100644
--- a/arch/arm/mach-omap1/flash.c
+++ b/arch/arm/mach-omap1/flash.c
@@ -11,6 +11,7 @@
 
 #include <plat/io.h>
 #include <plat/tc.h>
+#include <plat/flash.h>
 
 void omap1_set_vpp(struct map_info *map, int enable)
 {
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 5cfce1636da..8780e75cdc3 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -143,7 +143,7 @@ static struct irq_chip omap_fpga_irq = {
  */
 void omap1510_fpga_init_irq(void)
 {
-	int i;
+	int i, res;
 
 	__raw_writeb(0, OMAP1510_FPGA_IMR_LO);
 	__raw_writeb(0, OMAP1510_FPGA_IMR_HI);
@@ -177,10 +177,12 @@ void omap1510_fpga_init_irq(void)
 	 * NOTE: For general GPIO/MPUIO access and interrupts, please see
 	 * gpio.[ch]
 	 */
-	gpio_request(13, "FPGA irq");
+	res = gpio_request(13, "FPGA irq");
+	if (res) {
+		pr_err("%s failed to get gpio\n", __func__);
+		return;
+	}
 	gpio_direction_input(13);
 	set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
-
-EXPORT_SYMBOL(omap1510_fpga_init_irq);
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
new file mode 100644
index 00000000000..04c4b04cf54
--- /dev/null
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -0,0 +1,99 @@
+/*
+ * OMAP15xx specific gpio init
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
+#define OMAP1510_GPIO_BASE		0xFFFCE000
+
+/* gpio1 */
+static struct __initdata resource omap15xx_mpu_gpio_resources[] = {
+	{
+		.start	= OMAP1_MPUIO_VBASE,
+		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_MPUIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
+	.virtual_irq_start	= IH_MPUIO_BASE,
+	.bank_type		= METHOD_MPUIO,
+	.bank_width		= 16,
+	.bank_stride		= 1,
+};
+
+static struct __initdata platform_device omap15xx_mpu_gpio = {
+	.name           = "omap_gpio",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &omap15xx_mpu_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap15xx_mpu_gpio_resources),
+	.resource = omap15xx_mpu_gpio_resources,
+};
+
+/* gpio2 */
+static struct __initdata resource omap15xx_gpio_resources[] = {
+	{
+		.start	= OMAP1510_GPIO_BASE,
+		.end	= OMAP1510_GPIO_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_GPIO_BANK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
+	.virtual_irq_start	= IH_GPIO_BASE,
+	.bank_type		= METHOD_GPIO_1510,
+	.bank_width		= 16,
+};
+
+static struct __initdata platform_device omap15xx_gpio = {
+	.name           = "omap_gpio",
+	.id             = 1,
+	.dev            = {
+		.platform_data = &omap15xx_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap15xx_gpio_resources),
+	.resource = omap15xx_gpio_resources,
+};
+
+/*
+ * omap15xx_gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap15xx_gpio_init is a postcore_initcall.
+ */
+static int __init omap15xx_gpio_init(void)
+{
+	if (!cpu_is_omap15xx())
+		return -EINVAL;
+
+	platform_device_register(&omap15xx_mpu_gpio);
+	platform_device_register(&omap15xx_gpio);
+
+	gpio_bank_count = 2;
+	return 0;
+}
+postcore_initcall(omap15xx_gpio_init);
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
new file mode 100644
index 00000000000..5dd0d4c82b2
--- /dev/null
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -0,0 +1,200 @@
+/*
+ * OMAP16xx specific gpio init
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+
+#define OMAP1610_GPIO1_BASE		0xfffbe400
+#define OMAP1610_GPIO2_BASE		0xfffbec00
+#define OMAP1610_GPIO3_BASE		0xfffbb400
+#define OMAP1610_GPIO4_BASE		0xfffbbc00
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
+
+/* mpu gpio */
+static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
+	{
+		.start	= OMAP1_MPUIO_VBASE,
+		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_MPUIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
+	.virtual_irq_start	= IH_MPUIO_BASE,
+	.bank_type		= METHOD_MPUIO,
+	.bank_width		= 16,
+	.bank_stride		= 1,
+};
+
+static struct __initdata platform_device omap16xx_mpu_gpio = {
+	.name           = "omap_gpio",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &omap16xx_mpu_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_mpu_gpio_resources),
+	.resource = omap16xx_mpu_gpio_resources,
+};
+
+/* gpio1 */
+static struct __initdata resource omap16xx_gpio1_resources[] = {
+	{
+		.start	= OMAP1610_GPIO1_BASE,
+		.end	= OMAP1610_GPIO1_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_GPIO_BANK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
+	.virtual_irq_start	= IH_GPIO_BASE,
+	.bank_type		= METHOD_GPIO_1610,
+	.bank_width		= 16,
+};
+
+static struct __initdata platform_device omap16xx_gpio1 = {
+	.name           = "omap_gpio",
+	.id             = 1,
+	.dev            = {
+		.platform_data = &omap16xx_gpio1_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio1_resources),
+	.resource = omap16xx_gpio1_resources,
+};
+
+/* gpio2 */
+static struct __initdata resource omap16xx_gpio2_resources[] = {
+	{
+		.start	= OMAP1610_GPIO2_BASE,
+		.end	= OMAP1610_GPIO2_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_1610_GPIO_BANK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 16,
+	.bank_type		= METHOD_GPIO_1610,
+	.bank_width		= 16,
+};
+
+static struct __initdata platform_device omap16xx_gpio2 = {
+	.name           = "omap_gpio",
+	.id             = 2,
+	.dev            = {
+		.platform_data = &omap16xx_gpio2_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio2_resources),
+	.resource = omap16xx_gpio2_resources,
+};
+
+/* gpio3 */
+static struct __initdata resource omap16xx_gpio3_resources[] = {
+	{
+		.start	= OMAP1610_GPIO3_BASE,
+		.end	= OMAP1610_GPIO3_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_1610_GPIO_BANK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 32,
+	.bank_type		= METHOD_GPIO_1610,
+	.bank_width		= 16,
+};
+
+static struct __initdata platform_device omap16xx_gpio3 = {
+	.name           = "omap_gpio",
+	.id             = 3,
+	.dev            = {
+		.platform_data = &omap16xx_gpio3_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio3_resources),
+	.resource = omap16xx_gpio3_resources,
+};
+
+/* gpio4 */
+static struct __initdata resource omap16xx_gpio4_resources[] = {
+	{
+		.start	= OMAP1610_GPIO4_BASE,
+		.end	= OMAP1610_GPIO4_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_1610_GPIO_BANK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 48,
+	.bank_type		= METHOD_GPIO_1610,
+	.bank_width		= 16,
+};
+
+static struct __initdata platform_device omap16xx_gpio4 = {
+	.name           = "omap_gpio",
+	.id             = 4,
+	.dev            = {
+		.platform_data = &omap16xx_gpio4_config,
+	},
+	.num_resources = ARRAY_SIZE(omap16xx_gpio4_resources),
+	.resource = omap16xx_gpio4_resources,
+};
+
+static struct __initdata platform_device * omap16xx_gpio_dev[] = {
+	&omap16xx_mpu_gpio,
+	&omap16xx_gpio1,
+	&omap16xx_gpio2,
+	&omap16xx_gpio3,
+	&omap16xx_gpio4,
+};
+
+/*
+ * omap16xx_gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap16xx_gpio_init is a postcore_initcall.
+ */
+static int __init omap16xx_gpio_init(void)
+{
+	int i;
+
+	if (!cpu_is_omap16xx())
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++)
+		platform_device_register(omap16xx_gpio_dev[i]);
+
+	gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev);
+
+	return 0;
+}
+postcore_initcall(omap16xx_gpio_init);
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
new file mode 100644
index 00000000000..1204c8b871a
--- /dev/null
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -0,0 +1,262 @@
+/*
+ * OMAP7xx specific gpio init
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+
+#define OMAP7XX_GPIO1_BASE		0xfffbc000
+#define OMAP7XX_GPIO2_BASE		0xfffbc800
+#define OMAP7XX_GPIO3_BASE		0xfffbd000
+#define OMAP7XX_GPIO4_BASE		0xfffbd800
+#define OMAP7XX_GPIO5_BASE		0xfffbe000
+#define OMAP7XX_GPIO6_BASE		0xfffbe800
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
+
+/* mpu gpio */
+static struct __initdata resource omap7xx_mpu_gpio_resources[] = {
+	{
+		.start	= OMAP1_MPUIO_VBASE,
+		.end	= OMAP1_MPUIO_VBASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_MPUIO,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
+	.virtual_irq_start	= IH_MPUIO_BASE,
+	.bank_type		= METHOD_MPUIO,
+	.bank_width		= 32,
+	.bank_stride		= 2,
+};
+
+static struct __initdata platform_device omap7xx_mpu_gpio = {
+	.name           = "omap_gpio",
+	.id             = 0,
+	.dev            = {
+		.platform_data = &omap7xx_mpu_gpio_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources),
+	.resource = omap7xx_mpu_gpio_resources,
+};
+
+/* gpio1 */
+static struct __initdata resource omap7xx_gpio1_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO1_BASE,
+		.end	= OMAP7XX_GPIO1_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
+	.virtual_irq_start	= IH_GPIO_BASE,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio1 = {
+	.name           = "omap_gpio",
+	.id             = 1,
+	.dev            = {
+		.platform_data = &omap7xx_gpio1_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio1_resources),
+	.resource = omap7xx_gpio1_resources,
+};
+
+/* gpio2 */
+static struct __initdata resource omap7xx_gpio2_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO2_BASE,
+		.end	= OMAP7XX_GPIO2_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 32,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio2 = {
+	.name           = "omap_gpio",
+	.id             = 2,
+	.dev            = {
+		.platform_data = &omap7xx_gpio2_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio2_resources),
+	.resource = omap7xx_gpio2_resources,
+};
+
+/* gpio3 */
+static struct __initdata resource omap7xx_gpio3_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO3_BASE,
+		.end	= OMAP7XX_GPIO3_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 64,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio3 = {
+	.name           = "omap_gpio",
+	.id             = 3,
+	.dev            = {
+		.platform_data = &omap7xx_gpio3_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio3_resources),
+	.resource = omap7xx_gpio3_resources,
+};
+
+/* gpio4 */
+static struct __initdata resource omap7xx_gpio4_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO4_BASE,
+		.end	= OMAP7XX_GPIO4_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 96,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio4 = {
+	.name           = "omap_gpio",
+	.id             = 4,
+	.dev            = {
+		.platform_data = &omap7xx_gpio4_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio4_resources),
+	.resource = omap7xx_gpio4_resources,
+};
+
+/* gpio5 */
+static struct __initdata resource omap7xx_gpio5_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO5_BASE,
+		.end	= OMAP7XX_GPIO5_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK5,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 128,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio5 = {
+	.name           = "omap_gpio",
+	.id             = 5,
+	.dev            = {
+		.platform_data = &omap7xx_gpio5_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio5_resources),
+	.resource = omap7xx_gpio5_resources,
+};
+
+/* gpio6 */
+static struct __initdata resource omap7xx_gpio6_resources[] = {
+	{
+		.start	= OMAP7XX_GPIO6_BASE,
+		.end	= OMAP7XX_GPIO6_BASE + SZ_2K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= INT_7XX_GPIO_BANK6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
+	.virtual_irq_start	= IH_GPIO_BASE + 160,
+	.bank_type		= METHOD_GPIO_7XX,
+	.bank_width		= 32,
+};
+
+static struct __initdata platform_device omap7xx_gpio6 = {
+	.name           = "omap_gpio",
+	.id             = 6,
+	.dev            = {
+		.platform_data = &omap7xx_gpio6_config,
+	},
+	.num_resources = ARRAY_SIZE(omap7xx_gpio6_resources),
+	.resource = omap7xx_gpio6_resources,
+};
+
+static struct __initdata platform_device * omap7xx_gpio_dev[] = {
+	&omap7xx_mpu_gpio,
+	&omap7xx_gpio1,
+	&omap7xx_gpio2,
+	&omap7xx_gpio3,
+	&omap7xx_gpio4,
+	&omap7xx_gpio5,
+	&omap7xx_gpio6,
+};
+
+/*
+ * omap7xx_gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap7xx_gpio_init is a postcore_initcall.
+ */
+static int __init omap7xx_gpio_init(void)
+{
+	int i;
+
+	if (!cpu_is_omap7xx())
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++)
+		platform_device_register(omap7xx_gpio_dev[i]);
+
+	gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev);
+
+	return 0;
+}
+postcore_initcall(omap7xx_gpio_init);
diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h
index fd54b452eb2..847d00f0bb0 100644
--- a/arch/arm/mach-omap1/include/mach/camera.h
+++ b/arch/arm/mach-omap1/include/mach/camera.h
@@ -1,6 +1,8 @@
 #ifndef __ASM_ARCH_CAMERA_H_
 #define __ASM_ARCH_CAMERA_H_
 
+#include <media/omap1_camera.h>
+
 void omap1_camera_init(void *);
 
 static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
index df9060edda2..c9be6d4d83e 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -14,18 +14,17 @@
 #include <mach/irqs.h>
 #include <asm/hardware/gic.h>
 
-#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
-	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-#define INT_IH2_IRQ		INT_7XX_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ		INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+/*
+ * We use __glue to avoid errors with multiple definitions of
+ * .globl omap_irq_flags as it's included from entry-armv.S but not
+ * from entry-common.S.
+ */
+#ifdef __glue
+		.pushsection .data
+		.globl	omap_irq_flags
+omap_irq_flags:
+		.word	0
+		.popsection
 #endif
 
  		.macro	disable_fiq
@@ -47,9 +46,11 @@
 		beq	1510f
 
 		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		ldr	\tmp, =omap_irq_flags	@ irq flags address
+		ldr	\tmp, [\tmp, #0]	@ irq flags value
 		cmp	\irqnr, #0
 		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, #INT_IH2_IRQ
+		cmpeq	\irqnr, \tmp
 		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
 		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
 		addeqs	\irqnr, \irqnr, #32
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
index b001f67d695..22ec4a47957 100644
--- a/arch/arm/mach-omap1/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	0xd8000000
+#define VMALLOC_END	0xd8000000UL
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 0ce3fec2d25..870886a2959 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -142,3 +142,42 @@ void __init omap1_init_common_hw(void)
 	omap1_mux_init();
 }
 
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+u8 omap_readb(u32 pa)
+{
+	return __raw_readb(OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readb);
+
+u16 omap_readw(u32 pa)
+{
+	return __raw_readw(OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readw);
+
+u32 omap_readl(u32 pa)
+{
+	return __raw_readl(OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readl);
+
+void omap_writeb(u8 v, u32 pa)
+{
+	__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writeb);
+
+void omap_writew(u16 v, u32 pa)
+{
+	__raw_writew(v, OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writew);
+
+void omap_writel(u32 v, u32 pa)
+{
+	__raw_writel(v, OMAP1_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index db913c34d1f..6bddbc869f4 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -176,26 +176,31 @@ static struct irq_chip omap_irq_chip = {
 
 void __init omap_init_irq(void)
 {
+	extern unsigned int omap_irq_flags;
 	int i, j;
 
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 	if (cpu_is_omap7xx()) {
+		omap_irq_flags = INT_7XX_IH2_IRQ;
 		irq_banks = omap7xx_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
+		omap_irq_flags = INT_1510_IH2_IRQ;
 		irq_banks = omap1510_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap1510_irq_banks);
 	}
 	if (cpu_is_omap310()) {
+		omap_irq_flags = INT_1510_IH2_IRQ;
 		irq_banks = omap310_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap310_irq_banks);
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
+		omap_irq_flags = INT_1510_IH2_IRQ;
 		irq_banks = omap1610_irq_banks;
 		irq_bank_count = ARRAY_SIZE(omap1610_irq_banks);
 	}
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
index 3be11af687b..c9088d85da0 100644
--- a/arch/arm/mach-omap1/lcd_dma.c
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -424,6 +424,9 @@ static int __init omap_init_lcd_dma(void)
 {
 	int r;
 
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	if (cpu_is_omap16xx()) {
 		u16 w;
 
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 277f356d4cd..22eb11dde9e 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -17,6 +17,9 @@
 static int __init
 omap_leds_init(void)
 {
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	if (machine_is_omap_innovator())
 		leds_event = innovator_leds_event;
 
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 1a85a421007..c0e1f48aa11 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -133,19 +133,18 @@ static struct omap_mbox1_priv omap1_mbox_dsp_priv = {
 	},
 };
 
-struct omap_mbox mbox_dsp_info = {
+static struct omap_mbox mbox_dsp_info = {
 	.name	= "dsp",
 	.ops	= &omap1_mbox_ops,
 	.priv	= &omap1_mbox_dsp_priv,
 };
 
-struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
+static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
 
 static int __devinit omap1_mbox_probe(struct platform_device *pdev)
 {
 	struct resource *mem;
 	int ret;
-	int i;
 	struct omap_mbox **list;
 
 	list = omap1_mboxes;
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index b3a796a6da0..820973666f3 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -174,8 +174,11 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 #define OMAP16XX_MCBSP_REG_NUM		0
 #endif
 
-int __init omap1_mcbsp_init(void)
+static int __init omap1_mcbsp_init(void)
 {
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	if (cpu_is_omap7xx()) {
 		omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
 		omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16);
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 7835add0034..5fdef7a3482 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -343,7 +343,7 @@ MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
 #define OMAP1XXX_PINS_SZ	0
 #endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
 
-int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
+static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
 	unsigned long flags;
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index b1d3f9fade2..0cca23a8517 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -661,6 +661,9 @@ static int __init omap_pm_init(void)
 	int error;
 #endif
 
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	printk("Power Management for TI OMAP.\n");
 
 	/*
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index 8b66392be74..6588c22b8a6 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -48,7 +48,6 @@ static int omap1_pm_runtime_suspend(struct device *dev)
 
 static int omap1_pm_runtime_resume(struct device *dev)
 {
-	int ret = 0;
 	struct clk *iclk, *fclk;
 
 	dev_dbg(dev, "%s\n", __func__);
@@ -73,6 +72,9 @@ static int __init omap1_pm_runtime_init(void)
 	const struct dev_pm_ops *pm;
 	struct dev_pm_ops *omap_pm;
 
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	pm = platform_bus_get_pm_ops();
 	if (!pm) {
 		pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index b78d0749f13..550ca9d9991 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -27,6 +27,8 @@
 #include <mach/gpio.h>
 #include <plat/fpga.h>
 
+#include "pm.h"
+
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;
 static struct clk * uart3_ck;
@@ -52,9 +54,11 @@ static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
  */
 static void __init omap_serial_reset(struct plat_serial8250_port *p)
 {
-	omap_serial_outp(p, UART_OMAP_MDR1, 0x07);	/* disable UART */
+	omap_serial_outp(p, UART_OMAP_MDR1,
+			UART_OMAP_MDR1_DISABLE);	/* disable UART */
 	omap_serial_outp(p, UART_OMAP_SCR, 0x08);	/* TX watermark */
-	omap_serial_outp(p, UART_OMAP_MDR1, 0x00);	/* enable UART */
+	omap_serial_outp(p, UART_OMAP_MDR1,
+			UART_OMAP_MDR1_16X_MODE);	/* enable UART */
 
 	if (!cpu_is_omap15xx()) {
 		omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
@@ -254,6 +258,9 @@ late_initcall(omap_serial_wakeup_init);
 
 static int __init omap_init(void)
 {
+	if (!cpu_class_is_omap1())
+		return -ENODEV;
+
 	return platform_device_register(&serial_device);
 }
 arch_initcall(omap_init);
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 1be6a214d88..ed7a61ff916 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -52,6 +52,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include <plat/common.h>
 
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
@@ -208,7 +209,6 @@ static struct clocksource clocksource_mpu = {
 	.rating		= 300,
 	.read		= mpu_read,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 24,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -217,13 +217,10 @@ static void __init omap_init_clocksource(unsigned long rate)
 	static char err[] __initdata = KERN_ERR
 			"%s: can't register clocksource!\n";
 
-	clocksource_mpu.mult
-		= clocksource_khz2mult(rate/1000, clocksource_mpu.shift);
-
 	setup_irq(INT_TIMER2, &omap_mpu_timer2_irq);
 	omap_mpu_timer_start(1, ~0, 1);
 
-	if (clocksource_register(&clocksource_mpu))
+	if (clocksource_register_hz(&clocksource_mpu, rate))
 		printk(err, clocksource_mpu.name);
 }
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index ab784bfde90..1a2cf6226a5 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -15,7 +15,7 @@ config ARCH_OMAP2PLUS_TYPICAL
 	select SERIAL_OMAP_CONSOLE
 	select I2C
 	select I2C_OMAP
-	select MFD
+	select MFD_SUPPORT
 	select MENELAUS if ARCH_OMAP2
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
@@ -35,6 +35,8 @@ config ARCH_OMAP3
 	select CPU_V7
 	select USB_ARCH_HAS_EHCI
 	select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4
+	select ARCH_HAS_OPP
+	select PM_OPP if PM
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
@@ -44,6 +46,9 @@ config ARCH_OMAP4
 	select ARM_GIC
 	select PL310_ERRATA_588369
 	select ARM_ERRATA_720789
+	select ARCH_HAS_OPP
+	select PM_OPP if PM
+	select USB_ARCH_HAS_EHCI
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
@@ -85,6 +90,12 @@ config OMAP_PACKAGE_CUS
 config OMAP_PACKAGE_CBP
        bool
 
+config OMAP_PACKAGE_CBL
+       bool
+
+config OMAP_PACKAGE_CBS
+       bool
+
 comment "OMAP Board Type"
 	depends on ARCH_OMAP2PLUS
 
@@ -128,7 +139,6 @@ config MACH_DEVKIT8000
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CUS
-	select OMAP_MUX
 
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"
@@ -174,11 +184,17 @@ config MACH_OMAP3517EVM
 	default y
 	select OMAP_PACKAGE_CBB
 
+config MACH_CRANEBOARD
+	bool "AM3517/05 CRANE board"
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CBB
+
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
+	select REGULATOR_FIXED_VOLTAGE
 
 config MACH_OMAP3_TOUCHBOOK
 	bool "OMAP3 Touch Book"
@@ -210,6 +226,12 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 
+config MACH_NOKIA_RM680
+	bool "Nokia RM-680 board"
+	depends on ARCH_OMAP3
+	default y
+	select OMAP_PACKAGE_CBB
+
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3
@@ -224,6 +246,7 @@ config MACH_OMAP_ZOOM2
 	select SERIAL_8250
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_8250_CONSOLE
+	select REGULATOR_FIXED_VOLTAGE
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
@@ -233,20 +256,19 @@ config MACH_OMAP_ZOOM3
 	select SERIAL_8250
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_8250_CONSOLE
+	select REGULATOR_FIXED_VOLTAGE
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35 module"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CUS
-	select OMAP_MUX
 
 config MACH_CM_T3517
 	bool "CompuLab CM-T3517 module"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
-	select OMAP_MUX
 
 config MACH_IGEP0020
 	bool "IGEP v2 board"
@@ -265,7 +287,6 @@ config MACH_SBC3530
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CUS
-	select OMAP_MUX
 
 config MACH_OMAP_3630SDP
 	bool "OMAP3630 SDP board"
@@ -277,11 +298,15 @@ config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
 	default y
 	depends on ARCH_OMAP4
+	select OMAP_PACKAGE_CBL
+	select OMAP_PACKAGE_CBS
 
 config MACH_OMAP4_PANDA
 	bool "OMAP4 Panda Board"
 	default y
 	depends on ARCH_OMAP4
+	select OMAP_PACKAGE_CBL
+	select OMAP_PACKAGE_CBS
 
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 60e51bcf53b..cd7332f50b2 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -4,30 +4,31 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
-	 common.o
+	 common.o gpio.o dma.o wd_timer.o
 
-omap-2-3-common				= irq.o sdrc.o prm2xxx_3xxx.o
+omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o
-prcm-common				= prcm.o powerdomain.o
 clock-common				= clock.o clock_common_data.o \
-					  clockdomain.o clkt_dpll.o \
-					  clkt_clksel.o
+					  clkt_dpll.o clkt_clksel.o
 
-obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) prm44xx.o $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
+obj-$(CONFIG_TWL4030_CORE) += omap_twl.o
+
 # SMP support ONLY available for OMAP4
 obj-$(CONFIG_SMP)			+= omap-smp.o omap-headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= timer-mpu.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= omap-hotplug.o
 obj-$(CONFIG_ARCH_OMAP4)		+= omap44xx-smc.o omap4-common.o
 
-AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a
-AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_omap-headsmp.o			:=-Wa,-march=armv7-a$(plus_sec)
+AFLAGS_omap44xx-smc.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 # Functions loaded to SRAM
 obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
@@ -42,18 +43,29 @@ AFLAGS_sram34xx.o			:=-Wa,-march=armv7-a
 obj-$(CONFIG_ARCH_OMAP2420)		+= mux2420.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= mux2430.o
 obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
+obj-$(CONFIG_ARCH_OMAP4)		+= mux44xx.o
 
 # SMS/SDRC
 obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
 
+# OPP table initialization
+ifeq ($(CONFIG_PM_OPP),y)
+obj-y					+= opp.o
+obj-$(CONFIG_ARCH_OMAP3)		+= opp3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= opp4xxx_data.o
+endif
+
 # Power Management
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
-obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o
-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o pm_bus.o
-obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP2)		+= sleep24xx.o pm_bus.o voltage.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o voltage.o \
+					   cpuidle34xx.o pm_bus.o
+obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o voltage.o pm_bus.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
+obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
+obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a
@@ -65,10 +77,36 @@ endif
 endif
 
 # PRCM
-obj-$(CONFIG_ARCH_OMAP2)		+= cm.o
-obj-$(CONFIG_ARCH_OMAP3)		+= cm.o
-obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
-
+obj-$(CONFIG_ARCH_OMAP2)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= prcm.o cm2xxx_3xxx.o prm2xxx_3xxx.o
+# XXX The presence of cm2xxx_3xxx.o on the line below is temporary and
+# will be removed once the OMAP4 part of the codebase is converted to
+# use OMAP4-specific PRCM functions.
+obj-$(CONFIG_ARCH_OMAP4)		+= prcm.o cm2xxx_3xxx.o cminst44xx.o \
+					   cm44xx.o prcm_mpu44xx.o \
+					   prminst44xx.o
+
+# OMAP powerdomain framework
+powerdomain-common			+= powerdomain.o powerdomain-common.o
+obj-$(CONFIG_ARCH_OMAP2)		+= $(powerdomain-common) \
+					   powerdomain2xxx_3xxx.o \
+					   powerdomains2xxx_data.o \
+					   powerdomains2xxx_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= $(powerdomain-common) \
+					   powerdomain2xxx_3xxx.o \
+					   powerdomains3xxx_data.o \
+					   powerdomains2xxx_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= $(powerdomain-common) \
+					   powerdomain44xx.o \
+					   powerdomains44xx_data.o
+
+# PRCM clockdomain control
+obj-$(CONFIG_ARCH_OMAP2)		+= clockdomain.o \
+					   clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clockdomain.o \
+					   clockdomains2xxx_3xxx_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= clockdomain.o \
+					   clockdomains44xx_data.o
 # Clock framework
 obj-$(CONFIG_ARCH_OMAP2)		+= $(clock-common) clock2xxx.o \
 					   clkt2xxx_sys.o \
@@ -139,17 +177,20 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   hsmmc.o \
 					   board-flash.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
+obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
+					   sdram-nokia.o \
+					   hsmmc.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
-					   board-rx51-sdram.o \
+					   sdram-nokia.o \
 					   board-rx51-peripherals.o \
 					   board-rx51-video.o \
 					   hsmmc.o
-obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
+obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom.o \
 					   board-zoom-peripherals.o \
 					   board-flash.o \
 					   hsmmc.o \
 					   board-zoom-debugboard.o
-obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
+obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom.o \
 					   board-zoom-peripherals.o \
 					   board-flash.o \
 					   hsmmc.o \
@@ -168,12 +209,16 @@ obj-$(CONFIG_MACH_IGEP0030)		+= board-igep0030.o \
 obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
-					   hsmmc.o
+					   hsmmc.o \
+					   omap_phy_internal.o
 obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board-omap4panda.o \
-					   hsmmc.o
+					   hsmmc.o \
+					   omap_phy_internal.o
 
 obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
 
+obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
+
 obj-$(CONFIG_MACH_SBC3530)		+= board-omap3stalker.o \
 					   hsmmc.o
 # Platform specific device init code
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index b527f8d187a..e0661777f59 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -135,7 +135,7 @@ static inline void board_smc91x_init(void)
 
 #endif
 
-static struct omap_board_config_kernel sdp2430_config[] = {
+static struct omap_board_config_kernel sdp2430_config[] __initdata = {
 	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
@@ -143,9 +143,9 @@ static void __init omap_2430sdp_init_irq(void)
 {
 	omap_board_config = sdp2430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp2430_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
@@ -218,8 +218,6 @@ static struct omap_usb_config sdp2430_usb_config __initdata = {
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static void __init omap_2430sdp_init(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 4e3742c512b..3b39ef1a680 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -326,9 +326,9 @@ static void __init omap_3430sdp_init_irq(void)
 	omap_board_config = sdp3430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
 	omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
-	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static int sdp3430_batt_table[] = {
@@ -663,8 +663,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 /*
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index bbcf580fa09..5d41dbe059a 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -73,18 +73,16 @@ static void __init omap_sdp_init_irq(void)
 {
 	omap_board_config = sdp_config;
 	omap_board_config_size = ARRAY_SIZE(sdp_config);
-	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
-			h8mbx00u0mer0em_sdrc_params);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
+				  h8mbx00u0mer0em_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 /*
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index df5a425a49d..a70bdf28e2b 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -23,6 +23,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/regulator/machine.h>
 #include <linux/leds.h>
+#include <linux/leds_pwm.h>
 
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
@@ -35,6 +36,7 @@
 #include <plat/usb.h>
 #include <plat/mmc.h>
 
+#include "mux.h"
 #include "hsmmc.h"
 #include "timer-gp.h"
 #include "control.h"
@@ -42,6 +44,7 @@
 #define ETH_KS8851_IRQ			34
 #define ETH_KS8851_POWER_ON		48
 #define ETH_KS8851_QUART		138
+#define OMAP4SDP_MDM_PWR_EN_GPIO	157
 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO	184
 #define OMAP4_SFH7741_ENABLE_GPIO		188
 
@@ -96,6 +99,28 @@ static struct gpio_led_platform_data sdp4430_led_data = {
 	.num_leds	= ARRAY_SIZE(sdp4430_gpio_leds),
 };
 
+static struct led_pwm sdp4430_pwm_leds[] = {
+	{
+		.name		= "omap4:green:chrg",
+		.pwm_id		= 1,
+		.max_brightness	= 255,
+		.pwm_period_ns	= 7812500,
+	},
+};
+
+static struct led_pwm_platform_data sdp4430_pwm_data = {
+	.num_leds	= ARRAY_SIZE(sdp4430_pwm_leds),
+	.leds		= sdp4430_pwm_leds,
+};
+
+static struct platform_device sdp4430_leds_pwm = {
+	.name	= "leds_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &sdp4430_pwm_data,
+	},
+};
+
 static int omap_prox_activate(struct device *dev)
 {
 	gpio_set_value(OMAP4_SFH7741_ENABLE_GPIO , 1);
@@ -203,6 +228,7 @@ static struct platform_device *sdp4430_devices[] __initdata = {
 	&sdp4430_lcd_device,
 	&sdp4430_gpio_keys_device,
 	&sdp4430_leds_gpio,
+	&sdp4430_leds_pwm,
 };
 
 static struct omap_lcd_config sdp4430_lcd_config __initdata = {
@@ -217,20 +243,37 @@ static void __init omap_4430sdp_init_irq(void)
 {
 	omap_board_config = sdp4430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
 #endif
 	gic_init_irq();
-	omap_gpio_init();
 }
 
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0]	= EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2]	= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.phy_reset	= false,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL,
+};
+
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_UTMI,
-	.mode			= MUSB_PERIPHERAL,
+	.mode			= MUSB_OTG,
 	.power			= 100,
 };
 
+static struct twl4030_usb_data omap4_usbphy_data = {
+	.phy_init	= omap4430_phy_init,
+	.phy_exit	= omap4430_phy_exit,
+	.phy_power	= omap4430_phy_power,
+	.phy_set_clock	= omap4430_phy_set_clk,
+};
+
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -450,6 +493,7 @@ static struct twl4030_platform_data sdp4430_twldata = {
 	.vaux1		= &sdp4430_vaux1,
 	.vaux2		= &sdp4430_vaux2,
 	.vaux3		= &sdp4430_vaux3,
+	.usb		= &omap4_usbphy_data
 };
 
 static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
@@ -464,6 +508,9 @@ static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
 	{
 		I2C_BOARD_INFO("tmp105", 0x48),
 	},
+	{
+		I2C_BOARD_INFO("bh1780", 0x29),
+	},
 };
 static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
 	{
@@ -505,20 +552,37 @@ static void __init omap_sfh7741prox_init(void)
 	}
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_4430sdp_init(void)
 {
 	int status;
+	int package = OMAP_PACKAGE_CBS;
+
+	if (omap_rev() == OMAP4430_REV_ES1_0)
+		package = OMAP_PACKAGE_CBL;
+	omap4_mux_init(board_mux, package);
 
 	omap4_i2c_init();
 	omap_sfh7741prox_init();
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
 	omap_serial_init();
 	omap4_twl6030_hsmmc_init(mmc);
-	/* OMAP4 SDP uses internal transceiver so register nop transceiver */
-	usb_nop_xceiv_register();
-	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
-	if (!cpu_is_omap44xx())
-		usb_musb_init(&musb_board_data);
+
+	/* Power on the ULPI PHY */
+	if (gpio_is_valid(OMAP4SDP_MDM_PWR_EN_GPIO)) {
+		/* FIXME: Assumes pad is already muxed for GPIO mode */
+		gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3");
+		gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1);
+	}
+	usb_ehci_init(&ehci_pdata);
+	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();
 	if (status) {
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
new file mode 100644
index 00000000000..71acb5ab281
--- /dev/null
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -0,0 +1,116 @@
+/*
+ * Support for AM3517/05 Craneboard
+ * http://www.mistralsolutions.com/products/craneboard.php
+ *
+ * Copyright (C) 2010 Mistral Solutions Pvt Ltd. <www.mistralsolutions.com>
+ * Author: R.Srinath <srinath@mistralsolutions.com>
+ *
+ * Based on mach-omap2/board-am3517evm.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as  published by the
+ * Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/usb.h>
+
+#include "mux.h"
+#include "control.h"
+
+#define GPIO_USB_POWER		35
+#define GPIO_USB_NRESET		38
+
+
+/* Board initialization */
+static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init am3517_crane_init_irq(void)
+{
+	omap_board_config = am3517_crane_config;
+	omap_board_config_size = ARRAY_SIZE(am3517_crane_config);
+
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
+	omap_init_irq();
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = GPIO_USB_NRESET,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init am3517_crane_init(void)
+{
+	int ret;
+
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_serial_init();
+
+	/* Configure GPIO for EHCI port */
+	if (omap_mux_init_gpio(GPIO_USB_NRESET, OMAP_PIN_OUTPUT)) {
+		pr_err("Can not configure mux for GPIO_USB_NRESET %d\n",
+			GPIO_USB_NRESET);
+		return;
+	}
+
+	if (omap_mux_init_gpio(GPIO_USB_POWER, OMAP_PIN_OUTPUT)) {
+		pr_err("Can not configure mux for GPIO_USB_POWER %d\n",
+			GPIO_USB_POWER);
+		return;
+	}
+
+	ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable");
+	if (ret < 0) {
+		pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
+		return;
+	}
+
+	ret = gpio_direction_output(GPIO_USB_POWER, 1);
+	if (ret < 0) {
+		gpio_free(GPIO_USB_POWER);
+		pr_err("Unable to initialize EHCI power\n");
+		return;
+	}
+
+	usb_ehci_init(&ehci_pdata);
+}
+
+MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
+	.init_irq	= am3517_crane_init_irq,
+	.init_machine	= am3517_crane_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 07399505312..bc156264802 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -389,10 +389,9 @@ static void __init am3517_evm_init_irq(void)
 {
 	omap_board_config = am3517_evm_config;
 	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
-
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct omap_musb_board_data musb_board_data = {
@@ -442,8 +441,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP3_MUX(SAD2D_MCAD23, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 2c6db1aaeb2..9f55b68687f 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -270,7 +270,7 @@ static struct omap_lcd_config apollon_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel apollon_config[] = {
+static struct omap_board_config_kernel apollon_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
@@ -278,10 +278,9 @@ static void __init omap_apollon_init_irq(void)
 {
 	omap_board_config = apollon_config;
 	omap_board_config_size = ARRAY_SIZE(apollon_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
-	apollon_init_smc91x();
 }
 
 static void __init apollon_led_init(void)
@@ -314,8 +313,6 @@ static void __init apollon_usb_init(void)
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static void __init omap_apollon_init(void)
@@ -324,6 +321,7 @@ static void __init omap_apollon_init(void)
 
 	omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
 
+	apollon_init_smc91x();
 	apollon_led_init();
 	apollon_flash_init();
 	apollon_usb_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 63f764e2af3..486a3de5f40 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -600,8 +600,8 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
 	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[0]  = OMAP_MAX_GPIO_LINES + 6,
+	.reset_gpio_port[1]  = OMAP_MAX_GPIO_LINES + 7,
 	.reset_gpio_port[2]  = -EINVAL
 };
 
@@ -630,12 +630,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 	cm_t35_vmmc1_supply.dev = mmc[0].dev;
 	cm_t35_vsim_supply.dev = mmc[0].dev;
 
-	/* setup USB with proper PHY reset GPIOs */
-	ehci_pdata.reset_gpio_port[0] = gpio + 6;
-	ehci_pdata.reset_gpio_port[1] = gpio + 7;
-
-	usb_ehci_init(&ehci_pdata);
-
 	return 0;
 }
 
@@ -683,10 +677,10 @@ static void __init cm_t35_init_irq(void)
 	omap_board_config = cm_t35_config;
 	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
 
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct omap_board_mux board_mux[] __initdata = {
@@ -805,6 +799,7 @@ static void __init cm_t35_init(void)
 	cm_t35_init_display();
 
 	usb_musb_init(&musb_board_data);
+	usb_ehci_init(&ehci_pdata);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 1dd303e9a26..5b0c77732df 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -248,9 +248,9 @@ static void __init cm_t3517_init_irq(void)
 	omap_board_config = cm_t3517_config;
 	omap_board_config_size = ARRAY_SIZE(cm_t3517_config);
 
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct omap_board_mux board_mux[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f4379c87..451e7ff08b1 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -118,27 +118,27 @@ static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
 	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
 
 	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 1);
+		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
 	return 0;
 }
 
 static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
 {
 	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 0);
+		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
 }
 
 static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
 {
 	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 1);
+		gpio_set_value_cansleep(dssdev->reset_gpio, 1);
 	return 0;
 }
 
 static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
 {
 	if (gpio_is_valid(dssdev->reset_gpio))
-		gpio_set_value(dssdev->reset_gpio, 0);
+		gpio_set_value_cansleep(dssdev->reset_gpio, 0);
 }
 
 static struct regulator_consumer_supply devkit8000_vmmc1_supply =
@@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	devkit8000_vmmc1_supply.dev = mmc[0].dev;
-
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
@@ -447,13 +444,13 @@ static struct platform_device keys_gpio = {
 
 static void __init devkit8000_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
 #endif
-	omap_gpio_init();
 }
 
 static void __init devkit8000_ads7846_init(void)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index b1c2c9a11c3..0e3d81e09f8 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -37,7 +37,8 @@ static void __init omap_generic_init_irq(void)
 {
 	omap_board_config = generic_config;
 	omap_board_config_size = ARRAY_SIZE(generic_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 	omap_init_irq();
 }
 
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 929993b4bf2..25cc9dad4b0 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -51,38 +51,37 @@
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
 
-static int h4_keymap[] = {
+static const unsigned int h4_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
-	KEY(0, 1, KEY_RIGHT),
-	KEY(0, 2, KEY_A),
-	KEY(0, 3, KEY_B),
-	KEY(0, 4, KEY_C),
-	KEY(1, 0, KEY_DOWN),
+	KEY(1, 0, KEY_RIGHT),
+	KEY(2, 0, KEY_A),
+	KEY(3, 0, KEY_B),
+	KEY(4, 0, KEY_C),
+	KEY(0, 1, KEY_DOWN),
 	KEY(1, 1, KEY_UP),
-	KEY(1, 2, KEY_E),
-	KEY(1, 3, KEY_F),
-	KEY(1, 4, KEY_G),
-	KEY(2, 0, KEY_ENTER),
-	KEY(2, 1, KEY_I),
+	KEY(2, 1, KEY_E),
+	KEY(3, 1, KEY_F),
+	KEY(4, 1, KEY_G),
+	KEY(0, 2, KEY_ENTER),
+	KEY(1, 2, KEY_I),
 	KEY(2, 2, KEY_J),
-	KEY(2, 3, KEY_K),
-	KEY(2, 4, KEY_3),
-	KEY(3, 0, KEY_M),
-	KEY(3, 1, KEY_N),
-	KEY(3, 2, KEY_O),
+	KEY(3, 2, KEY_K),
+	KEY(4, 2, KEY_3),
+	KEY(0, 3, KEY_M),
+	KEY(1, 3, KEY_N),
+	KEY(2, 3, KEY_O),
 	KEY(3, 3, KEY_P),
-	KEY(3, 4, KEY_Q),
-	KEY(4, 0, KEY_R),
-	KEY(4, 1, KEY_4),
-	KEY(4, 2, KEY_T),
-	KEY(4, 3, KEY_U),
+	KEY(4, 3, KEY_Q),
+	KEY(0, 4, KEY_R),
+	KEY(1, 4, KEY_4),
+	KEY(2, 4, KEY_T),
+	KEY(3, 4, KEY_U),
 	KEY(4, 4, KEY_ENTER),
-	KEY(5, 0, KEY_V),
-	KEY(5, 1, KEY_W),
-	KEY(5, 2, KEY_L),
-	KEY(5, 3, KEY_S),
-	KEY(5, 4, KEY_ENTER),
-	0
+	KEY(0, 5, KEY_V),
+	KEY(1, 5, KEY_W),
+	KEY(2, 5, KEY_L),
+	KEY(3, 5, KEY_S),
+	KEY(4, 5, KEY_ENTER),
 };
 
 static struct mtd_partition h4_partitions[] = {
@@ -136,12 +135,16 @@ static struct platform_device h4_flash_device = {
 	.resource	= &h4_flash_resource,
 };
 
+static const struct matrix_keymap_data h4_keymap_data = {
+	.keymap		= h4_keymap,
+	.keymap_size	= ARRAY_SIZE(h4_keymap),
+};
+
 static struct omap_kp_platform_data h4_kp_data = {
 	.rows		= 6,
 	.cols		= 7,
-	.keymap 	= h4_keymap,
-	.keymapsize 	= ARRAY_SIZE(h4_keymap),
-	.rep		= 1,
+	.keymap_data	= &h4_keymap_data,
+	.rep		= true,
 	.row_gpios 	= row_gpios,
 	.col_gpios 	= col_gpios,
 };
@@ -283,7 +286,7 @@ static struct omap_usb_config h4_usb_config __initdata = {
 	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
 };
 
-static struct omap_board_config_kernel h4_config[] = {
+static struct omap_board_config_kernel h4_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
@@ -291,9 +294,9 @@ static void __init omap_h4_init_irq(void)
 {
 	omap_board_config = h4_config;
 	omap_board_config_size = ARRAY_SIZE(h4_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 	h4_init_flash();
 }
 
@@ -321,8 +324,6 @@ static struct i2c_board_info __initdata h4_i2c_board_info[] = {
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static void __init omap_h4_init(void)
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5e035a58b80..0afa3011db0 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -19,6 +19,7 @@
 #include <linux/interrupt.h>
 
 #include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
 
@@ -136,16 +137,9 @@ static struct mtd_partition igep2_onenand_partitions[] = {
 	},
 };
 
-static int igep2_onenand_setup(void __iomem *onenand_base, int freq)
-{
-       /* nothing is required to be setup for onenand as of now */
-       return 0;
-}
-
 static struct omap_onenand_platform_data igep2_onenand_data = {
 	.parts = igep2_onenand_partitions,
 	.nr_parts = ARRAY_SIZE(igep2_onenand_partitions),
-	.onenand_setup = igep2_onenand_setup,
 	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
 };
 
@@ -159,35 +153,34 @@ static struct platform_device igep2_onenand_device = {
 
 static void __init igep2_flash_init(void)
 {
-	u8		cs = 0;
-	u8		onenandcs = GPMC_CS_NUM + 1;
+	u8 cs = 0;
+	u8 onenandcs = GPMC_CS_NUM + 1;
 
-	while (cs < GPMC_CS_NUM) {
-		u32 ret = 0;
+	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+		u32 ret;
 		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
 
 		/* Check if NAND/oneNAND is configured */
 		if ((ret & 0xC00) == 0x800)
 			/* NAND found */
-			pr_err("IGEP v2: Unsupported NAND found\n");
+			pr_err("IGEP2: Unsupported NAND found\n");
 		else {
 			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
 			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
 				/* ONENAND found */
 				onenandcs = cs;
 		}
-		cs++;
 	}
+
 	if (onenandcs > GPMC_CS_NUM) {
-		pr_err("IGEP v2: Unable to find configuration in GPMC\n");
+		pr_err("IGEP2: Unable to find configuration in GPMC\n");
 		return;
 	}
 
-	if (onenandcs < GPMC_CS_NUM) {
-		igep2_onenand_data.cs = onenandcs;
-		if (platform_device_register(&igep2_onenand_device) < 0)
-			pr_err("IGEP v2: Unable to register OneNAND device\n");
-	}
+	igep2_onenand_data.cs = onenandcs;
+
+	if (platform_device_register(&igep2_onenand_device) < 0)
+		pr_err("IGEP2: Unable to register OneNAND device\n");
 }
 
 #else
@@ -254,12 +247,8 @@ static inline void __init igep2_init_smsc911x(void)
 static inline void __init igep2_init_smsc911x(void) { }
 #endif
 
-static struct omap_board_config_kernel igep2_config[] __initdata = {
-};
-
-static struct regulator_consumer_supply igep2_vmmc1_supply = {
-	.supply		= "vmmc",
-};
+static struct regulator_consumer_supply igep2_vmmc1_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
 
 /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
 static struct regulator_init_data igep2_vmmc1 = {
@@ -276,6 +265,52 @@ static struct regulator_init_data igep2_vmmc1 = {
 	.consumer_supplies      = &igep2_vmmc1_supply,
 };
 
+static struct regulator_consumer_supply igep2_vio_supply =
+	REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
+
+static struct regulator_init_data igep2_vio = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.apply_uV		= 1,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &igep2_vio_supply,
+};
+
+static struct regulator_consumer_supply igep2_vmmc2_supply =
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
+static struct regulator_init_data igep2_vmmc2 = {
+	.constraints		= {
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
+		.always_on		= 1,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &igep2_vmmc2_supply,
+};
+
+static struct fixed_voltage_config igep2_vwlan = {
+	.supply_name		= "vwlan",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.enabled_at_boot	= 1,
+	.init_data		= &igep2_vmmc2,
+};
+
+static struct platform_device igep2_vwlan_device = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &igep2_vwlan,
+	},
+};
+
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -317,6 +352,7 @@ static struct gpio_led igep2_gpio_leds[] = {
 		.name			= "gpio-led:green:d1",
 		.default_trigger	= "heartbeat",
 		.gpio			= -EINVAL, /* gets replaced */
+		.active_low		= 1,
 	},
 };
 
@@ -342,24 +378,21 @@ static void __init igep2_leds_init(void)
 static inline void igep2_leds_init(void)
 {
 	if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
+	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0))
 		gpio_export(IGEP2_GPIO_LED0_RED, 0);
-		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
-	} else
+	else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
 
 	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
+	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0))
 		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
-		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
-	} else
+	else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
 
 	if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) &&
-	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
+	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0))
 		gpio_export(IGEP2_GPIO_LED1_RED, 0);
-		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
-	} else
+	else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
 
 }
@@ -373,12 +406,6 @@ static int igep2_twl_gpio_setup(struct device *dev,
 	omap2_hsmmc_init(mmc);
 
 	/*
-	 * link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	 */
-	igep2_vmmc1_supply.dev = mmc[0].dev;
-
-	/*
 	 * REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
 	 */
@@ -397,10 +424,9 @@ static int igep2_twl_gpio_setup(struct device *dev,
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
 #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
 	if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0)
-	    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) {
+	    && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0))
 		gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0);
-		gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0);
-	} else
+	else
 		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n");
 #else
 	igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -489,15 +515,15 @@ static void __init igep2_display_init(void)
 
 static struct platform_device *igep2_devices[] __initdata = {
 	&igep2_dss_device,
+	&igep2_vwlan_device,
 };
 
 static void __init igep2_init_irq(void)
 {
-	omap_board_config = igep2_config;
-	omap_board_config_size = ARRAY_SIZE(igep2_config);
-	omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(m65kxxxxam_sdrc_params,
+				  m65kxxxxam_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct twl4030_codec_audio_data igep2_audio_data = {
@@ -519,7 +545,7 @@ static struct twl4030_platform_data igep2_twldata = {
 	.gpio		= &igep2_twl4030_gpio_pdata,
 	.vmmc1          = &igep2_vmmc1,
 	.vpll2		= &igep2_vpll2,
-
+	.vio		= &igep2_vio,
 };
 
 static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = {
@@ -577,8 +603,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c
index 22b0b253e16..bcccd68f185 100644
--- a/arch/arm/mach-omap2/board-igep0030.c
+++ b/arch/arm/mach-omap2/board-igep0030.c
@@ -289,9 +289,10 @@ static struct twl4030_usb_data igep3_twl4030_usb_data = {
 
 static void __init igep3_init_irq(void)
 {
-	omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(m65kxxxxam_sdrc_params,
+				  m65kxxxxam_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct twl4030_platform_data igep3_twl4030_pdata = {
@@ -366,8 +367,6 @@ void __init igep3_wifi_bt_init(void) {}
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static void __init igep3_init(void)
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 001fd9713f3..e5dc74875f9 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -292,10 +292,9 @@ static void __init omap_ldp_init_irq(void)
 {
 	omap_board_config = ldp_config;
 	omap_board_config_size = ARRAY_SIZE(ldp_config);
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
-	ldp_init_smsc911x();
 }
 
 static struct twl4030_usb_data ldp_usb_data = {
@@ -381,8 +380,6 @@ static struct platform_device *ldp_devices[] __initdata = {
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static struct omap_musb_board_data musb_board_data = {
@@ -426,6 +423,7 @@ static struct mtd_partition ldp_nand_partitions[] = {
 static void __init omap_ldp_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	ldp_init_smsc911x();
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	ts_gpio = 54;
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e823c7042ab..f396756872b 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -46,8 +46,7 @@ static struct device *mmc_device;
 #define TUSB6010_GPIO_ENABLE	0
 #define TUSB6010_DMACHAN	0x3f
 
-#if defined(CONFIG_USB_TUSB6010) || \
-	defined(CONFIG_USB_TUSB6010_MODULE)
+#ifdef CONFIG_USB_MUSB_TUSB6010
 /*
  * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
  * 1.5 V voltage regulators of PM companion chip. Companion chip will then
@@ -134,7 +133,7 @@ err:
 
 static void __init n8x0_usb_init(void) {}
 
-#endif /*CONFIG_USB_TUSB6010 */
+#endif /*CONFIG_USB_MUSB_TUSB6010 */
 
 
 static struct omap2_mcspi_device_config p54spi_mcspi_config = {
@@ -184,23 +183,15 @@ static struct mtd_partition onenand_partitions[] = {
 	},
 };
 
-static struct omap_onenand_platform_data board_onenand_data = {
-	.cs		= 0,
-	.gpio_irq	= 26,
-	.parts		= onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(onenand_partitions),
-	.flags		= ONENAND_SYNC_READ,
+static struct omap_onenand_platform_data board_onenand_data[] = {
+	{
+		.cs		= 0,
+		.gpio_irq	= 26,
+		.parts		= onenand_partitions,
+		.nr_parts	= ARRAY_SIZE(onenand_partitions),
+		.flags		= ONENAND_SYNC_READ,
+	}
 };
-
-static void __init n8x0_onenand_init(void)
-{
-	gpmc_onenand_init(&board_onenand_data);
-}
-
-#else
-
-static void __init n8x0_onenand_init(void) {}
-
 #endif
 
 #if defined(CONFIG_MENELAUS) &&						\
@@ -639,9 +630,9 @@ static void __init n8x0_map_io(void)
 
 static void __init n8x0_init_irq(void)
 {
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 #ifdef CONFIG_OMAP_MUX
@@ -653,8 +644,43 @@ static struct omap_board_mux board_mux[] __initdata = {
 	OMAP2420_MUX(EAC_AC_DOUT, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+
+static struct omap_device_pad serial2_pads[] __initdata = {
+	{
+		.name	= "uart3_rx_irrx.uart3_rx_irrx",
+		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
+		.enable	= OMAP_MUX_MODE0,
+		.idle	= OMAP_MUX_MODE3	/* Mux as GPIO for idle */
+	},
+};
+
+static inline void board_serial_init(void)
+{
+	struct omap_board_data bdata;
+
+	bdata.flags = 0;
+	bdata.pads = NULL;
+	bdata.pads_cnt = 0;
+
+	bdata.id = 0;
+	omap_serial_init_port(&bdata);
+
+	bdata.id = 1;
+	omap_serial_init_port(&bdata);
+
+	bdata.id = 2;
+	bdata.pads = serial2_pads;
+	bdata.pads_cnt = ARRAY_SIZE(serial2_pads);
+	omap_serial_init_port(&bdata);
+}
+
 #else
-#define board_mux	NULL
+
+static inline void board_serial_init(void)
+{
+	omap_serial_init();
+}
+
 #endif
 
 static void __init n8x0_init_machine(void)
@@ -669,9 +695,8 @@ static void __init n8x0_init_machine(void)
 	if (machine_is_nokia_n810())
 		i2c_register_board_info(2, n810_i2c_board_info_2,
 					ARRAY_SIZE(n810_i2c_board_info_2));
-
-	omap_serial_init();
-	n8x0_onenand_init();
+	board_serial_init();
+	gpmc_onenand_init(board_onenand_data);
 	n8x0_mmc_init();
 	n8x0_usb_init();
 }
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 14f42240ae7..6c127605942 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -484,13 +484,13 @@ static struct platform_device keys_gpio = {
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
 #endif
-	omap_gpio_init();
 }
 
 static struct platform_device *omap3_beagle_devices[] __initdata = {
@@ -548,8 +548,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b04365c6bb1..3de8d9b8ec7 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -623,9 +623,9 @@ static void __init omap3_evm_init_irq(void)
 {
 	omap_board_config = omap3_evm_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct platform_device *omap3_evm_devices[] __initdata = {
@@ -654,8 +654,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 				OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_OUTPUT_LOW),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 5f7d2c1e7ef..15e4b08e99b 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -197,17 +197,15 @@ static inline void __init board_smsc911x_init(void)
 
 static void __init omap3logic_init_irq(void)
 {
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux       NULL
 #endif
 
 static void __init omap3logic_init(void)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 89ed1be2d62..0b34beded11 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -293,7 +293,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 	},
 	{
 		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
 		.init_card	= pandora_wl1251_init_card,
@@ -636,37 +636,19 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
-}
-
-static void pandora_wl1251_set_power(bool enable)
-{
-	/*
-	 * Keep power always on until wl1251_sdio driver learns to re-init
-	 * the chip after powering it down and back up.
-	 */
 }
 
-static struct wl12xx_platform_data pandora_wl1251_pdata = {
-	.set_power	= pandora_wl1251_set_power,
-	.use_eeprom	= true,
-};
-
-static struct platform_device pandora_wl1251_data = {
-	.name           = "wl1251_data",
-	.id             = -1,
-	.dev		= {
-		.platform_data	= &pandora_wl1251_pdata,
-	},
-};
-
-static void pandora_wl1251_init(void)
+static void __init pandora_wl1251_init(void)
 {
+	struct wl12xx_platform_data pandora_wl1251_pdata;
 	int ret;
 
+	memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
+
 	ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
 	if (ret < 0)
 		goto fail;
@@ -679,6 +661,11 @@ static void pandora_wl1251_init(void)
 	if (pandora_wl1251_pdata.irq < 0)
 		goto fail_irq;
 
+	pandora_wl1251_pdata.use_eeprom = true;
+	ret = wl12xx_set_platform_data(&pandora_wl1251_pdata);
+	if (ret < 0)
+		goto fail_irq;
+
 	return;
 
 fail_irq:
@@ -691,7 +678,6 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
 	&pandora_dss_device,
-	&pandora_wl1251_data,
 	&pandora_vwlan_device,
 };
 
@@ -711,8 +697,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index f2527212541..9df9d936760 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -584,12 +584,12 @@ static void __init omap3_stalker_init_irq(void)
 {
 	omap_board_config = omap3_stalker_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
 #endif
-	omap_gpio_init();
 }
 
 static struct platform_device *omap3_stalker_devices[] __initdata = {
@@ -616,8 +616,6 @@ static struct omap_board_mux board_mux[] __initdata = {
 		  OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE),
 	{.reg_offset = OMAP_MUX_TERMINATOR},
 };
-#else
-#define board_mux	NULL
 #endif
 
 static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 41104bb8774..db1f74fe6c4 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -413,8 +413,6 @@ static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static void __init omap3_touchbook_init_irq(void)
@@ -422,13 +420,13 @@ static void __init omap3_touchbook_init_irq(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_board_config = omap3_touchbook_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
 #endif
-	omap_gpio_init();
 }
 
 static struct platform_device *omap3_touchbook_devices[] __initdata = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 1ecd0a6cefb..3094e200784 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -40,6 +40,7 @@
 
 #include "hsmmc.h"
 #include "control.h"
+#include "mux.h"
 
 #define GPIO_HUB_POWER		1
 #define GPIO_HUB_NRESET		62
@@ -76,9 +77,9 @@ static struct platform_device *panda_devices[] __initdata = {
 
 static void __init omap4_panda_init_irq(void)
 {
-	omap2_init_common_hw(NULL, NULL);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(NULL, NULL);
 	gic_init_irq();
-	omap_gpio_init();
 }
 
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
@@ -133,15 +134,23 @@ error1:
 
 static struct omap_musb_board_data musb_board_data = {
 	.interface_type		= MUSB_INTERFACE_UTMI,
-	.mode			= MUSB_PERIPHERAL,
+	.mode			= MUSB_OTG,
 	.power			= 100,
 };
 
+static struct twl4030_usb_data omap4_usbphy_data = {
+	.phy_init	= omap4430_phy_init,
+	.phy_exit	= omap4430_phy_exit,
+	.phy_power	= omap4430_phy_power,
+	.phy_set_clock	= omap4430_phy_set_clk,
+};
+
 static struct omap2_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= -EINVAL,
+		.gpio_cd	= -EINVAL,
 	},
 	{}	/* Terminator */
 };
@@ -345,6 +354,7 @@ static struct twl4030_platform_data omap4_panda_twldata = {
 	.vaux1		= &omap4_panda_vaux1,
 	.vaux2		= &omap4_panda_vaux2,
 	.vaux3		= &omap4_panda_vaux3,
+	.usb		= &omap4_usbphy_data,
 };
 
 static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = {
@@ -368,8 +378,23 @@ static int __init omap4_panda_i2c_init(void)
 	omap_register_i2c_bus(4, 400, NULL, 0);
 	return 0;
 }
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap4_panda_init(void)
 {
+	int package = OMAP_PACKAGE_CBS;
+
+	if (omap_rev() == OMAP4430_REV_ES1_0)
+		package = OMAP_PACKAGE_CBL;
+	omap4_mux_init(board_mux, package);
+
 	omap4_panda_i2c_init();
 	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
 	omap_serial_init();
@@ -377,9 +402,7 @@ static void __init omap4_panda_init(void)
 	/* OMAP4 Panda uses internal transceiver so register nop transceiver */
 	usb_nop_xceiv_register();
 	omap4_ehci_init();
-	/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
-	if (!cpu_is_omap44xx())
-		usb_musb_init(&musb_board_data);
+	usb_musb_init(&musb_board_data);
 }
 
 static void __init omap4_panda_map_io(void)
@@ -391,6 +414,7 @@ static void __init omap4_panda_map_io(void)
 MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
 	/* Maintainer: David Anders - Texas Instruments Inc */
 	.boot_params	= 0x80000100,
+	.reserve	= omap_reserve,
 	.map_io		= omap4_panda_map_io,
 	.init_irq	= omap4_panda_init_irq,
 	.init_machine	= omap4_panda_init,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 7053bc0b46d..cb26e5d8268 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -413,10 +413,10 @@ static void __init overo_init_irq(void)
 {
 	omap_board_config = overo_config;
 	omap_board_config_size = ARRAY_SIZE(overo_config);
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-			     mt46h32m32lf6_sdrc_params);
+	omap2_init_common_infrastructure();
+	omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
+				  mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 static struct platform_device *overo_devices[] __initdata = {
@@ -438,8 +438,6 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
new file mode 100644
index 00000000000..cb77be7ac44
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -0,0 +1,187 @@
+/*
+ * Board support file for Nokia RM-680.
+ *
+ * Copyright (C) 2010 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/i2c/twl.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/i2c.h>
+#include <plat/mmc.h>
+#include <plat/usb.h>
+#include <plat/gpmc.h>
+#include <plat/common.h>
+#include <plat/onenand.h>
+
+#include "mux.h"
+#include "hsmmc.h"
+#include "sdram-nokia.h"
+
+static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"),
+};
+
+/* Fixed regulator for internal eMMC */
+static struct regulator_init_data rm680_vemmc = {
+	.constraints =	{
+		.name			= "rm680_vemmc",
+		.min_uV			= 2900000,
+		.max_uV			= 2900000,
+		.apply_uV		= 1,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_STATUS
+					| REGULATOR_CHANGE_MODE,
+	},
+	.num_consumer_supplies		= ARRAY_SIZE(rm680_vemmc_consumers),
+	.consumer_supplies		= rm680_vemmc_consumers,
+};
+
+static struct fixed_voltage_config rm680_vemmc_config = {
+	.supply_name		= "VEMMC",
+	.microvolts		= 2900000,
+	.gpio			= 157,
+	.startup_delay		= 150,
+	.enable_high		= 1,
+	.init_data		= &rm680_vemmc,
+};
+
+static struct platform_device rm680_vemmc_device = {
+	.name			= "reg-fixed-voltage",
+	.dev			= {
+		.platform_data	= &rm680_vemmc_config,
+	},
+};
+
+static struct platform_device *rm680_peripherals_devices[] __initdata = {
+	&rm680_vemmc_device,
+};
+
+/* TWL */
+static struct twl4030_gpio_platform_data rm680_gpio_data = {
+	.gpio_base		= OMAP_MAX_GPIO_LINES,
+	.irq_base		= TWL4030_GPIO_IRQ_BASE,
+	.irq_end		= TWL4030_GPIO_IRQ_END,
+	.pullups		= BIT(0),
+	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
+};
+
+static struct twl4030_usb_data rm680_usb_data = {
+	.usb_mode		= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_platform_data rm680_twl_data = {
+	.irq_base		= TWL4030_IRQ_BASE,
+	.irq_end		= TWL4030_IRQ_END,
+	.gpio			= &rm680_gpio_data,
+	.usb			= &rm680_usb_data,
+	/* add rest of the children here */
+};
+
+static struct i2c_board_info __initdata rm680_twl_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("twl5031", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &rm680_twl_data,
+	},
+};
+
+static void __init rm680_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2900, rm680_twl_i2c_board_info,
+				ARRAY_SIZE(rm680_twl_i2c_board_info));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+}
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+static struct omap_onenand_platform_data board_onenand_data[] = {
+	{
+		.gpio_irq	= 65,
+		.flags		= ONENAND_SYNC_READWRITE,
+	}
+};
+#endif
+
+/* eMMC */
+static struct omap2_hsmmc_info mmc[] __initdata = {
+	{
+		.name		= "internal",
+		.mmc		= 2,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{ /* Terminator */ }
+};
+
+static void __init rm680_peripherals_init(void)
+{
+	platform_add_devices(rm680_peripherals_devices,
+				ARRAY_SIZE(rm680_peripherals_devices));
+	rm680_i2c_init();
+	gpmc_onenand_init(board_onenand_data);
+	omap2_hsmmc_init(mmc);
+}
+
+static void __init rm680_init_irq(void)
+{
+	struct omap_sdrc_params *sdrc_params;
+
+	omap2_init_common_infrastructure();
+	sdrc_params = nokia_get_sdram_timings();
+	omap2_init_common_devices(sdrc_params, sdrc_params);
+	omap_init_irq();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif
+
+static struct omap_musb_board_data rm680_musb_data = {
+	.interface_type	= MUSB_INTERFACE_ULPI,
+	.mode		= MUSB_PERIPHERAL,
+	.power		= 100,
+};
+
+static void __init rm680_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_serial_init();
+	usb_musb_init(&rm680_musb_data);
+	rm680_peripherals_init();
+}
+
+static void __init rm680_map_io(void)
+{
+	omap2_set_globals_3xxx();
+	omap34xx_map_common_io();
+}
+
+MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
+	.boot_params	= 0x80000100,
+	.map_io		= rm680_map_io,
+	.reserve	= omap_reserve,
+	.init_irq	= rm680_init_irq,
+	.init_machine	= rm680_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 3fec4d62a91..e75e240cad6 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -23,7 +23,6 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
-#include <sound/tlv320aic3x.h>
 
 #include <plat/mcspi.h>
 #include <plat/board.h>
@@ -293,6 +292,8 @@ static struct omap_board_mux rx51_mmc2_off_mux[] = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
+static struct omap_mux_partition *partition;
+
 /*
  * Current flows to eMMC when eMMC is off and the data lines are pulled up,
  * so pull them down. N.B. we pull 8 lines because we are using 8 lines.
@@ -300,9 +301,9 @@ static struct omap_board_mux rx51_mmc2_off_mux[] = {
 static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
 {
 	if (power_on)
-		omap_mux_write_array(rx51_mmc2_on_mux);
+		omap_mux_write_array(partition, rx51_mmc2_on_mux);
 	else
-		omap_mux_write_array(rx51_mmc2_off_mux);
+		omap_mux_write_array(partition, rx51_mmc2_off_mux);
 }
 
 static struct omap2_hsmmc_info mmc[] __initdata = {
@@ -342,6 +343,8 @@ static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
 	/* tlv320aic3x analog supplies */
 	REGULATOR_SUPPLY("AVDD", "2-0018"),
 	REGULATOR_SUPPLY("DRVDD", "2-0018"),
+	REGULATOR_SUPPLY("AVDD", "2-0019"),
+	REGULATOR_SUPPLY("DRVDD", "2-0019"),
 	/* tpa6130a2 */
 	REGULATOR_SUPPLY("Vdd", "2-0060"),
 	/* Keep vmmc as last item. It is not iterated for newer boards */
@@ -352,19 +355,16 @@ static struct regulator_consumer_supply rx51_vio_supplies[] = {
 	/* tlv320aic3x digital supplies */
 	REGULATOR_SUPPLY("IOVDD", "2-0018"),
 	REGULATOR_SUPPLY("DVDD", "2-0018"),
+	REGULATOR_SUPPLY("IOVDD", "2-0019"),
+	REGULATOR_SUPPLY("DVDD", "2-0019"),
 };
 
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-extern struct platform_device rx51_display_device;
-#endif
-
 static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-	{
-		.supply	= "vdds_sdi",
-		.dev	= &rx51_display_device.dev,
-	},
-#endif
+	REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+};
+
+static struct regulator_consumer_supply rx51_vdac_supply[] = {
+	REGULATOR_SUPPLY("vdda_dac", "omapdss"),
 };
 
 static struct regulator_init_data rx51_vaux1 = {
@@ -484,14 +484,17 @@ static struct regulator_init_data rx51_vsim = {
 
 static struct regulator_init_data rx51_vdac = {
 	.constraints = {
+		.name			= "VDAC",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
+		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= rx51_vdac_supply,
 };
 
 static struct regulator_init_data rx51_vio = {
@@ -717,7 +720,7 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
 	.vio			= &rx51_vio,
 };
 
-static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata = {
+static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = {
 	.id			= TPA6130A2,
 	.power_gpio		= 98,
 };
@@ -742,11 +745,19 @@ static struct aic3x_pdata rx51_aic3x_data = {
 	.gpio_reset = 60,
 };
 
+static struct aic3x_pdata rx51_aic3x_data2 = {
+	.gpio_reset = 60,
+};
+
 static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
 		.platform_data = &rx51_aic3x_data,
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x19),
+		.platform_data = &rx51_aic3x_data2,
+	},
 #if defined(CONFIG_SENSORS_TSL2563) || defined(CONFIG_SENSORS_TSL2563_MODULE)
 	{
 		I2C_BOARD_INFO("tsl2563", 0x29),
@@ -815,25 +826,15 @@ static struct mtd_partition onenand_partitions[] = {
 	},
 };
 
-static struct omap_onenand_platform_data board_onenand_data = {
-	.cs		= 0,
-	.gpio_irq	= 65,
-	.parts		= onenand_partitions,
-	.nr_parts	= ARRAY_SIZE(onenand_partitions),
-	.flags		= ONENAND_SYNC_READWRITE,
+static struct omap_onenand_platform_data board_onenand_data[] = {
+	{
+		.cs		= 0,
+		.gpio_irq	= 65,
+		.parts		= onenand_partitions,
+		.nr_parts	= ARRAY_SIZE(onenand_partitions),
+		.flags		= ONENAND_SYNC_READWRITE,
+	}
 };
-
-static void __init board_onenand_init(void)
-{
-	gpmc_onenand_init(&board_onenand_data);
-}
-
-#else
-
-static inline void board_onenand_init(void)
-{
-}
-
 #endif
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
@@ -916,13 +917,17 @@ error:
 void __init rx51_peripherals_init(void)
 {
 	rx51_i2c_init();
-	board_onenand_init();
+	gpmc_onenand_init(board_onenand_data);
 	board_smc91x_init();
 	rx51_add_gpio_keys();
 	rx51_init_wl1251();
 	spi_register_board_info(rx51_peripherals_spi_board_info,
 				ARRAY_SIZE(rx51_peripherals_spi_board_info));
-	omap2_hsmmc_init(mmc);
+
+	partition = omap_mux_get("core");
+	if (partition)
+		omap2_hsmmc_init(mmc);
+
 	platform_device_register(&rx51_charger_device);
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index 85503fed4e1..acd670054d9 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -14,7 +14,6 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/mm.h>
-
 #include <asm/mach-types.h>
 #include <plat/display.h>
 #include <plat/vram.h>
@@ -49,8 +48,16 @@ static struct omap_dss_device rx51_lcd_device = {
 	.platform_disable	= rx51_lcd_disable,
 };
 
+static struct omap_dss_device  rx51_tv_device = {
+	.name			= "tv",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.driver_name		= "venc",
+	.phy.venc.type	        = OMAP_DSS_VENC_TYPE_COMPOSITE,
+};
+
 static struct omap_dss_device *rx51_dss_devices[] = {
 	&rx51_lcd_device,
+	&rx51_tv_device,
 };
 
 static struct omap_dss_board_info rx51_dss_board_info = {
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 36f2cf4efd5..f53fc551c58 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -32,10 +32,10 @@
 
 #include "mux.h"
 #include "pm.h"
+#include "sdram-nokia.h"
 
 #define RX51_GPIO_SLEEP_IND 162
 
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
 extern void rx51_video_mem_init(void);
 
 static struct gpio_led gpio_leds[] = {
@@ -105,10 +105,10 @@ static void __init rx51_init_irq(void)
 	omap_board_config = rx51_config;
 	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap3_pm_init_cpuidle(rx51_cpuidle_params);
-	sdrc_params = rx51_get_sdram_timings();
-	omap2_init_common_hw(sdrc_params, sdrc_params);
+	omap2_init_common_infrastructure();
+	sdrc_params = nokia_get_sdram_timings();
+	omap2_init_common_devices(sdrc_params, sdrc_params);
 	omap_init_irq();
-	omap_gpio_init();
 }
 
 extern void __init rx51_peripherals_init(void);
@@ -117,8 +117,6 @@ extern void __init rx51_peripherals_init(void);
 static struct omap_board_mux board_mux[] __initdata = {
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
-#else
-#define board_mux	NULL
 #endif
 
 static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 86c9b210295..3fbd0edd712 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -196,7 +196,7 @@ struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
 	.board_ref_clock = 1,
 };
 
-static struct omap2_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.name		= "external",
 		.mmc		= 1,
@@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
 	{
 		.name		= "wl1271",
 		.mmc		= 3,
-		.caps		= MMC_CAP_4_BIT_DATA,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
 		.gpio_wp	= -EINVAL,
 		.gpio_cd	= -EINVAL,
 		.nonremovable	= true,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom.c
index 5adde12c039..e041c537ea3 100644
--- a/arch/arm/mach-omap2/board-zoom3.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -1,6 +1,9 @@
 /*
- * Copyright (C) 2009 Texas Instruments Inc.
+ * Copyright (C) 2009-2010 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ * Felipe Balbi <balbi@ti.com>
  *
+ * Modified from mach-omap2/board-ldp.c
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -12,22 +15,55 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/i2c/twl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/board-zoom.h>
-
 #include <plat/common.h>
 #include <plat/board.h>
 #include <plat/usb.h>
 
+#include <mach/board-zoom.h>
+
 #include "board-flash.h"
 #include "mux.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
-static struct omap_board_config_kernel zoom_config[] __initdata = {
+#define ZOOM3_EHCI_RESET_GPIO		64
+
+static void __init omap_zoom_init_irq(void)
+{
+	omap2_init_common_infrastructure();
+	if (machine_is_omap_zoom2())
+		omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
+					  mt46h32m32lf6_sdrc_params);
+	else if (machine_is_omap_zoom3())
+		omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
+					  h8mbx00u0mer0em_sdrc_params);
+
+	omap_init_irq();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 162 */
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN POWER ENABLE - GPIO 101 */
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC3 CMD */
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 CLK */
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 DAT[0-3] */
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
+#endif
 
 static struct mtd_partition zoom_nand_partitions[] = {
 	/* All the partition sizes are listed in terms of NAND block size */
@@ -70,59 +106,41 @@ static struct mtd_partition zoom_nand_partitions[] = {
 	},
 };
 
-static void __init omap_zoom_init_irq(void)
-{
-	omap_board_config = zoom_config;
-	omap_board_config_size = ARRAY_SIZE(zoom_config);
-	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
-			h8mbx00u0mer0em_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* WLAN IRQ - GPIO 162 */
-	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN POWER ENABLE - GPIO 101 */
-	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* WLAN SDIO: MMC3 CMD */
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 CLK */
-	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 DAT[0-3] */
-	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define board_mux	NULL
-#endif
-
 static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
 	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
 	.phy_reset		= true,
 	.reset_gpio_port[0]	= -EINVAL,
-	.reset_gpio_port[1]	= 64,
+	.reset_gpio_port[1]	= ZOOM3_EHCI_RESET_GPIO,
 	.reset_gpio_port[2]	= -EINVAL,
 };
 
 static void __init omap_zoom_init(void)
 {
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-	zoom_peripherals_init();
+	if (machine_is_omap_zoom2()) {
+		omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	} else if (machine_is_omap_zoom3()) {
+		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
+		usb_ehci_init(&ehci_pdata);
+	}
+
 	board_nand_init(zoom_nand_partitions,
-			 ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
+			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
 	zoom_debugboard_init();
-
-	omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
-	usb_ehci_init(&ehci_pdata);
+	zoom_peripherals_init();
 }
 
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_zoom_init_irq,
+	.init_machine	= omap_zoom_init,
+	.timer		= &omap_timer,
+MACHINE_END
+
 MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_map_io,
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
deleted file mode 100644
index 2992a9f3a58..00000000000
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- *
- * Modified from mach-omap2/board-ldp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <plat/common.h>
-#include <plat/board.h>
-
-#include <mach/board-zoom.h>
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-
-static void __init omap_zoom2_init_irq(void)
-{
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
-				 mt46h32m32lf6_sdrc_params);
-	omap_init_irq();
-	omap_gpio_init();
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* WLAN IRQ - GPIO 162 */
-	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN POWER ENABLE - GPIO 101 */
-	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* WLAN SDIO: MMC3 CMD */
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 CLK */
-	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 DAT[0-3] */
-	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define board_mux	NULL
-#endif
-
-static struct mtd_partition zoom_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "system",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
-	},
-	{
-		.name		= "userdata",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-	{
-		.name		= "cache",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-};
-
-static void __init omap_zoom2_init(void)
-{
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	zoom_peripherals_init();
-	board_nand_init(zoom_nand_partitions,
-			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
-	zoom_debugboard_init();
-}
-
-MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.boot_params	= 0x80000100,
-	.map_io		= omap3_map_io,
-	.reserve	= omap_reserve,
-	.init_irq	= omap_zoom2_init_irq,
-	.init_machine	= omap_zoom2_init,
-	.timer		= &omap_timer,
-MACHINE_END
diff --git a/arch/arm/mach-omap2/clkt2xxx_apll.c b/arch/arm/mach-omap2/clkt2xxx_apll.c
index 66e01acfd58..f51cffd1fc5 100644
--- a/arch/arm/mach-omap2/clkt2xxx_apll.c
+++ b/arch/arm/mach-omap2/clkt2xxx_apll.c
@@ -26,7 +26,7 @@
 
 #include "clock.h"
 #include "clock2xxx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
 
 /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
@@ -49,14 +49,14 @@ static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
 
 	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
 
-	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
 
 	if ((cval & apll_mask) == apll_mask)
 		return 0;   /* apll already enabled */
 
 	cval &= ~apll_mask;
 	cval |= apll_mask;
-	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+	omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
 
 	omap2_cm_wait_idlest(cm_idlest_pll, status_mask,
 			     OMAP24XX_CM_IDLEST_VAL, clk->name);
@@ -83,9 +83,9 @@ static void omap2_clk_apll_disable(struct clk *clk)
 {
 	u32 cval;
 
-	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	cval = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
 	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
-	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+	omap2_cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
 }
 
 /* Public data */
@@ -106,7 +106,7 @@ u32 omap2xxx_get_apll_clkin(void)
 {
 	u32 aplls, srate = 0;
 
-	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
 	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
 	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
 
diff --git a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
index 019048434f1..4ae43922208 100644
--- a/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
+++ b/arch/arm/mach-omap2/clkt2xxx_dpllcore.c
@@ -32,7 +32,7 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
 
 /* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
@@ -54,7 +54,7 @@ unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
 
 	core_clk = omap2_get_dpll_rate(clk);
 
-	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
 	v &= OMAP24XX_CORE_CLK_SRC_MASK;
 
 	if (v == CORE_CLK_SRC_32K)
@@ -73,7 +73,7 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate)
 {
 	u32 high, low, core_clk_src;
 
-	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	core_clk_src = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
 	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
 
 	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
@@ -111,7 +111,7 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 	const struct dpll_data *dd;
 
 	cur_rate = omap2xxx_clk_get_core_rate(dclk);
-	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	mult = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
 	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
 
 	if ((rate == (cur_rate / 2)) && (mult == 2)) {
@@ -136,7 +136,7 @@ int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
 		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
 					   dd->div1_mask);
 		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll = omap2_cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
 		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
 		if (rate > low) {
 			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
diff --git a/arch/arm/mach-omap2/clkt2xxx_osc.c b/arch/arm/mach-omap2/clkt2xxx_osc.c
index 2167be84a5b..df7b8050648 100644
--- a/arch/arm/mach-omap2/clkt2xxx_osc.c
+++ b/arch/arm/mach-omap2/clkt2xxx_osc.c
@@ -27,7 +27,7 @@
 
 #include "clock.h"
 #include "clock2xxx.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 
 static int omap2_enable_osc_ck(struct clk *clk)
diff --git a/arch/arm/mach-omap2/clkt2xxx_sys.c b/arch/arm/mach-omap2/clkt2xxx_sys.c
index 822b5a79f45..8693cfdac49 100644
--- a/arch/arm/mach-omap2/clkt2xxx_sys.c
+++ b/arch/arm/mach-omap2/clkt2xxx_sys.c
@@ -26,7 +26,7 @@
 
 #include "clock.h"
 #include "clock2xxx.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 
 void __iomem *prcm_clksrc_ctrl;
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index aef62918aaf..39f9d5a58d0 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -40,7 +40,7 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
 
 const struct prcm_config *curr_prcm_set;
@@ -133,21 +133,21 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 			done_rate = CORE_CLK_SRC_DPLL;
 
 		/* MPU divider */
-		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
+		omap2_cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
 
 		/* dsp + iva1 div(2420), iva2.1(2430) */
-		cm_write_mod_reg(prcm->cm_clksel_dsp,
+		omap2_cm_write_mod_reg(prcm->cm_clksel_dsp,
 				 OMAP24XX_DSP_MOD, CM_CLKSEL);
 
-		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
+		omap2_cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
 
 		/* Major subsystem dividers */
-		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+		tmp = omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
+		omap2_cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
 				 CM_CLKSEL1);
 
 		if (cpu_is_omap2430())
-			cm_write_mod_reg(prcm->cm_clksel_mdm,
+			omap2_cm_write_mod_reg(prcm->cm_clksel_mdm,
 					 OMAP2430_MDM_MOD, CM_CLKSEL);
 
 		/* x2 to enter omap2xxx_sdrc_init_params() */
diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c
index 6ce512e902c..337392c3f54 100644
--- a/arch/arm/mach-omap2/clkt_dpll.c
+++ b/arch/arm/mach-omap2/clkt_dpll.c
@@ -24,7 +24,6 @@
 #include <plat/clock.h>
 
 #include "clock.h"
-#include "cm.h"
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index b5babf5440e..2a2f15213ad 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -24,14 +24,12 @@
 #include <linux/bitops.h>
 
 #include <plat/clock.h>
-#include <plat/clockdomain.h>
+#include "clockdomain.h"
 #include <plat/cpu.h>
 #include <plat/prcm.h>
 
 #include "clock.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index a535c7a2a62..896584e3c4a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -49,7 +49,6 @@
 
 /* DPLL Type and DCO Selection Flags */
 #define DPLL_J_TYPE		0x1
-#define DPLL_NO_DCO_SEL		0x2
 
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c
index 21f856252ad..0a992bc8d0d 100644
--- a/arch/arm/mach-omap2/clock2420_data.c
+++ b/arch/arm/mach-omap2/clock2420_data.c
@@ -22,8 +22,8 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "prm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
@@ -812,7 +812,7 @@ static struct clk dss2_fck = {		/* Alt clk used in power management */
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
 	.clksel		= dss2_fck_clksel,
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk dss_54m_fck = {	/* Alt clk used in power management */
@@ -1862,10 +1862,10 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_242X),
 	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_242X),
-	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_242X),
-	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
-	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_242X),
-	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_242X),
+	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_242X),
+	CLK("omap_i2c.1", "fck",	&i2c1_fck,	CK_242X),
+	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_242X),
+	CLK("omap_i2c.2", "fck",	&i2c2_fck,	CK_242X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_242X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_242X),
 	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_242X),
@@ -1877,7 +1877,7 @@ static struct omap_clk omap2420_clks[] = {
 	CLK("omap-aes",	"ick",	&aes_ick,	CK_242X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_242X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_242X),
-	CLK("musb_hdrc",	"fck",	&osc_ck,	CK_242X),
+	CLK("musb-hdrc",	"fck",	&osc_ck,	CK_242X),
 };
 
 /*
diff --git a/arch/arm/mach-omap2/clock2430.c b/arch/arm/mach-omap2/clock2430.c
index 44d0cccc51a..d87bc9cb2a3 100644
--- a/arch/arm/mach-omap2/clock2430.c
+++ b/arch/arm/mach-omap2/clock2430.c
@@ -25,7 +25,7 @@
 
 #include "clock.h"
 #include "clock2xxx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
 
 /**
diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c
index e32afcbdfb8..c047dcd007e 100644
--- a/arch/arm/mach-omap2/clock2430_data.c
+++ b/arch/arm/mach-omap2/clock2430_data.c
@@ -22,8 +22,8 @@
 #include "clock.h"
 #include "clock2xxx.h"
 #include "opp2xxx.h"
-#include "prm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
@@ -800,7 +800,7 @@ static struct clk dss2_fck = {		/* Alt clk used in power management */
 	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
 	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
 	.clksel		= dss2_fck_clksel,
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk dss_54m_fck = {	/* Alt clk used in power management */
@@ -1969,10 +1969,10 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X),
 	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X),
-	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_243X),
-	CLK("i2c_omap.1", "fck",	&i2chs1_fck,	CK_243X),
-	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_243X),
-	CLK("i2c_omap.2", "fck",	&i2chs2_fck,	CK_243X),
+	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_243X),
+	CLK("omap_i2c.1", "fck",	&i2chs1_fck,	CK_243X),
+	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_243X),
+	CLK("omap_i2c.2", "fck",	&i2chs2_fck,	CK_243X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X),
 	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X),
 	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X),
@@ -1983,7 +1983,7 @@ static struct omap_clk omap2430_clks[] = {
 	CLK("omap-aes",	"ick",	&aes_ick,	CK_243X),
 	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X),
 	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X),
-	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
+	CLK("musb-omap2430",	"ick",	&usbhs_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
 	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
 	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 6febd5f11e8..287abc48092 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -25,7 +25,7 @@
 
 #include "clock.h"
 #include "clock34xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 
 /**
diff --git a/arch/arm/mach-omap2/clock3517.c b/arch/arm/mach-omap2/clock3517.c
index b496a9305e1..74116a3cf09 100644
--- a/arch/arm/mach-omap2/clock3517.c
+++ b/arch/arm/mach-omap2/clock3517.c
@@ -25,7 +25,7 @@
 
 #include "clock.h"
 #include "clock3517.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 
 /*
diff --git a/arch/arm/mach-omap2/clock3xxx.c b/arch/arm/mach-omap2/clock3xxx.c
index a447c4d2c28..e9f66b6dec1 100644
--- a/arch/arm/mach-omap2/clock3xxx.c
+++ b/arch/arm/mach-omap2/clock3xxx.c
@@ -25,9 +25,9 @@
 
 #include "clock.h"
 #include "clock3xxx.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "prm-regbits-34xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 
 /*
@@ -94,7 +94,7 @@ static int __init omap3xxx_clk_arch_init(void)
 
 	ret = omap2_clk_switch_mpurate_at_boot("dpll1_ck");
 	if (!ret)
-		omap2_clk_print_new_rates("osc_sys_ck", "arm_fck", "core_ck");
+		omap2_clk_print_new_rates("osc_sys_ck", "core_ck", "arm_fck");
 
 	return ret;
 }
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index d85ecd5aebf..d3ab1c9e50b 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -28,9 +28,9 @@
 #include "clock36xx.h"
 #include "clock3517.h"
 
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "prm-regbits-34xx.h"
 #include "control.h"
 
@@ -120,7 +120,7 @@ static const struct clksel_rate osc_sys_13m_rates[] = {
 };
 
 static const struct clksel_rate osc_sys_16_8m_rates[] = {
-	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2PLUS_36XX },
 	{ .div = 0 }
 };
 
@@ -452,35 +452,35 @@ static struct clk dpll3_x2_ck = {
 static const struct clksel_rate div31_dpll3_rates[] = {
 	{ .div = 1, .val = 1, .flags = RATE_IN_3XXX },
 	{ .div = 2, .val = 2, .flags = RATE_IN_3XXX },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2PLUS },
-	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2PLUS },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2PLUS_36XX },
+	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2PLUS_36XX },
 	{ .div = 0 },
 };
 
@@ -602,6 +602,8 @@ static struct dpll_data dpll4_dd_3630 __initdata = {
 	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
 	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
 	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
+	.dco_mask	= OMAP3630_PERIPH_DPLL_DCO_SEL_MASK,
+	.sddiv_mask	= OMAP3630_PERIPH_DPLL_SD_DIV_MASK,
 	.max_multiplier = OMAP3630_MAX_JTYPE_DPLL_MULT,
 	.min_divider	= 1,
 	.max_divider	= OMAP3_MAX_DPLL_DIV,
@@ -1558,6 +1560,7 @@ static struct clk mcspi4_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
 	.recalc		= &followparent_recalc,
+	.clkdm_name	= "core_l4_clkdm",
 };
 
 static struct clk mcspi3_fck = {
@@ -1567,6 +1570,7 @@ static struct clk mcspi3_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
 	.recalc		= &followparent_recalc,
+	.clkdm_name	= "core_l4_clkdm",
 };
 
 static struct clk mcspi2_fck = {
@@ -1576,6 +1580,7 @@ static struct clk mcspi2_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
 	.recalc		= &followparent_recalc,
+	.clkdm_name	= "core_l4_clkdm",
 };
 
 static struct clk mcspi1_fck = {
@@ -1585,6 +1590,7 @@ static struct clk mcspi1_fck = {
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
 	.recalc		= &followparent_recalc,
+	.clkdm_name	= "core_l4_clkdm",
 };
 
 static struct clk uart2_fck = {
@@ -3044,6 +3050,7 @@ static struct clk sr1_fck = {
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -3054,6 +3061,7 @@ static struct clk sr2_fck = {
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
 	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -3201,7 +3209,7 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_3XXX),
 	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_3XXX),
 	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_3XXX),
-	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2PLUS | CK_AM35XX  | CK_36XX),
 	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_3XXX),
 	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_3XXX),
 	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_3XXX),
@@ -3218,8 +3226,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_3XXX),
 	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_3XXX),
 	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_3XXX),
-	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_343X),
-	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_34XX | CK_36XX),
+	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_3XXX),
 	CLK(NULL,	"core_ck",	&core_ck,	CK_3XXX),
 	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_3XXX),
@@ -3248,8 +3256,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_3XXX),
 	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_3XXX),
 	CLK("etb",	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_3XXX),
-	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2 | CK_AM35XX),
-	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_3XXX),
 	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_3XXX),
 	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_3XXX),
@@ -3257,8 +3265,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_3XXX),
 	CLK(NULL,	"arm_fck",	&arm_fck,	CK_3XXX),
 	CLK("etb",	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_3XXX),
-	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
-	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
+	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_34XX | CK_36XX),
+	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"l3_ick",	&l3_ick,	CK_3XXX),
 	CLK(NULL,	"l4_ick",	&l4_ick,	CK_3XXX),
 	CLK(NULL,	"rm_ick",	&rm_ick,	CK_3XXX),
@@ -3267,27 +3275,28 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
 	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
 	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
-	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2 | CK_3517),
-	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2 | CK_3517),
+	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2PLUS | CK_3517 | CK_36XX),
+	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2PLUS | CK_3517 | CK_36XX),
 	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
-	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
-	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
-	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
+	CLK(NULL,	"modem_fck",	&modem_fck,	CK_34XX | CK_36XX),
+	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_34XX | CK_36XX),
+	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_3XXX),
 	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_3XXX),
-	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2 | CK_AM35XX),
-	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2 | CK_AM35XX),
-	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2 | CK_AM35XX),
+	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("ehci-omap.0",	"usbtll_fck",	&usbtll_fck,	CK_3430ES2 | CK_AM35XX),
 	CLK("omap-mcbsp.1",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK("omap-mcbsp.5",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
-	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2 | CK_AM35XX),
+	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_3XXX),
-	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_34XX | CK_36XX),
 	CLK("mmci-omap-hs.0",	"fck",	&mmchs1_fck,	CK_3XXX),
-	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_3XXX),
-	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_3XXX),
-	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_3XXX),
+	CLK("omap_i2c.3", "fck",	&i2c3_fck,	CK_3XXX),
+	CLK("omap_i2c.2", "fck",	&i2c2_fck,	CK_3XXX),
+	CLK("omap_i2c.1", "fck",	&i2c1_fck,	CK_3XXX),
 	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_3XXX),
 	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_3XXX),
 	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_3XXX),
@@ -3301,34 +3310,35 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_3XXX),
 	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_3XXX),
 	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_3XXX),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2),
+	CLK("musb-omap2430",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
+	CLK("musb-omap2430",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_3XXX),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_3XXX),
-	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
-	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
+	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_34XX | CK_36XX),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_3XXX),
-	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2 | CK_AM35XX),
-	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2 | CK_AM35XX),
-	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
-	CLK("omap-aes",	"ick",	&aes2_ick,	CK_343X),
-	CLK("omap-sham",	"ick",	&sha12_ick,	CK_343X),
-	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
+	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("ehci-omap.0",	"usbtll_ick",	&usbtll_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_34XX | CK_36XX),
+	CLK("omap-aes",	"ick",	&aes2_ick,	CK_34XX | CK_36XX),
+	CLK("omap-sham",	"ick",	&sha12_ick,	CK_34XX | CK_36XX),
+	CLK(NULL,	"des2_ick",	&des2_ick,	CK_34XX | CK_36XX),
 	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_3XXX),
 	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_3XXX),
-	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_34XX | CK_36XX),
 	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_3XXX),
 	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_3XXX),
 	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_3XXX),
 	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_3XXX),
 	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_3XXX),
-	CLK("i2c_omap.3", "ick",	&i2c3_ick,	CK_3XXX),
-	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_3XXX),
-	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_3XXX),
+	CLK("omap_i2c.3", "ick",	&i2c3_ick,	CK_3XXX),
+	CLK("omap_i2c.2", "ick",	&i2c2_ick,	CK_3XXX),
+	CLK("omap_i2c.1", "ick",	&i2c1_ick,	CK_3XXX),
 	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_3XXX),
 	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_3XXX),
 	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_3XXX),
@@ -3336,37 +3346,40 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_3XXX),
 	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_3XXX),
 	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
-	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_34XX | CK_36XX),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_3XXX),
-	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
-	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
-	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
-	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
-	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
-	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
+	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_34XX | CK_36XX),
+	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_34XX | CK_36XX),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_34XX | CK_36XX),
+	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_34XX | CK_36XX),
+	CLK(NULL,	"des1_ick",	&des1_ick,	CK_34XX | CK_36XX),
 	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
-	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2 | CK_AM35XX),
+	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
 	CLK("omapdss",	"tv_fck",	&dss_tv_fck,	CK_3XXX),
 	CLK("omapdss",	"video_fck",	&dss_96m_fck,	CK_3XXX),
 	CLK("omapdss",	"dss2_fck",	&dss2_alwon_fck, CK_3XXX),
 	CLK("omapdss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
-	CLK("omapdss",	"ick",		&dss_ick_3430es2,	CK_3430ES2 | CK_AM35XX),
-	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
-	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
-	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
-	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2 | CK_AM35XX),
-	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2 | CK_AM35XX),
-	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2 | CK_AM35XX),
-	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
+	CLK("omapdss",	"ick",		&dss_ick_3430es2,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_34XX | CK_36XX),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_34XX | CK_36XX),
+	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_34XX | CK_36XX),
+	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("ehci-omap.0",	"hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("ehci-omap.0",	"fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK("ehci-omap.0",	"usbhost_ick",	&usbhost_ick,	CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2PLUS | CK_36XX),
 	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_3XXX),
 	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_3XXX),
 	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_3XXX),
 	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_3XXX),
-	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
-	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
+	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_34XX | CK_36XX),
+	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2PLUS | CK_36XX),
 	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_3XXX),
 	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_3XXX),
 	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_3XXX),
@@ -3424,9 +3437,9 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_3XXX),
 	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_3XXX),
 	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_3XXX),
-	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_343X),
-	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_343X),
-	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_343X),
+	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_34XX | CK_36XX),
+	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_34XX | CK_36XX),
+	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_3XXX),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_3XXX),
 	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_3XXX),
@@ -3437,8 +3450,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK("davinci_emac",	"phy_clk",	&emac_fck,	CK_AM35XX),
 	CLK("vpfe-capture",	"master",	&vpfe_ick,	CK_AM35XX),
 	CLK("vpfe-capture",	"slave",	&vpfe_fck,	CK_AM35XX),
-	CLK("musb_hdrc",	"ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),
-	CLK("musb_hdrc",	"fck",		&hsotgusb_fck_am35xx,	CK_AM35XX),
+	CLK("musb-am35x",	"ick",		&hsotgusb_ick_am35xx,	CK_AM35XX),
+	CLK("musb-am35x",	"fck",		&hsotgusb_fck_am35xx,	CK_AM35XX),
 	CLK(NULL,	"hecc_ck",	&hecc_ck,	CK_AM35XX),
 	CLK(NULL,	"uart4_ick",	&uart4_ick_am35xx,	CK_AM35XX),
 };
@@ -3447,38 +3460,37 @@ static struct omap_clk omap3xxx_clks[] = {
 int __init omap3xxx_clk_init(void)
 {
 	struct omap_clk *c;
-	u32 cpu_clkflg = CK_3XXX;
+	u32 cpu_clkflg = 0;
 
 	if (cpu_is_omap3517()) {
-		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
-		cpu_clkflg |= CK_3517;
+		cpu_mask = RATE_IN_34XX;
+		cpu_clkflg = CK_3517;
 	} else if (cpu_is_omap3505()) {
-		cpu_mask = RATE_IN_3XXX | RATE_IN_3430ES2PLUS;
-		cpu_clkflg |= CK_3505;
+		cpu_mask = RATE_IN_34XX;
+		cpu_clkflg = CK_3505;
+	} else if (cpu_is_omap3630()) {
+		cpu_mask = (RATE_IN_34XX | RATE_IN_36XX);
+		cpu_clkflg = CK_36XX;
 	} else if (cpu_is_omap34xx()) {
-		cpu_mask = RATE_IN_3XXX;
-		cpu_clkflg |= CK_343X;
-
-		/*
-		 * Update this if there are further clock changes between ES2
-		 * and production parts
-		 */
 		if (omap_rev() == OMAP3430_REV_ES1_0) {
-			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
-			cpu_clkflg |= CK_3430ES1;
+			cpu_mask = RATE_IN_3430ES1;
+			cpu_clkflg = CK_3430ES1;
 		} else {
-			cpu_mask |= RATE_IN_3430ES2PLUS;
-			cpu_clkflg |= CK_3430ES2;
+			/*
+			 * Assume that anything that we haven't matched yet
+			 * has 3430ES2-type clocks.
+			 */
+			cpu_mask = RATE_IN_3430ES2PLUS;
+			cpu_clkflg = CK_3430ES2PLUS;
 		}
+	} else {
+		WARN(1, "clock: could not identify OMAP3 variant\n");
 	}
 
 	if (omap3_has_192mhz_clk())
 		omap_96m_alwon_fck = omap_96m_alwon_fck_3630;
 
 	if (cpu_is_omap3630()) {
-		cpu_mask |= RATE_IN_36XX;
-		cpu_clkflg |= CK_36XX;
-
 		/*
 		 * XXX This type of dynamic rewriting of the clock tree is
 		 * deprecated and should be revised soon.
@@ -3525,10 +3537,9 @@ int __init omap3xxx_clk_init(void)
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
-	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
+	pr_info("Clocking rate (Crystal/Core/MPU): %ld.%01ld/%ld/%ld MHz\n",
+		(osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
+		(core_ck.rate / 1000000), (arm_fck.rate / 1000000));
 
 	/*
 	 * Only enable those clocks we will need, let the drivers
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 1599836ba3d..e8cb32fd7f1 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -30,11 +30,18 @@
 
 #include "clock.h"
 #include "clock44xx.h"
-#include "cm.h"
+#include "cm1_44xx.h"
+#include "cm2_44xx.h"
 #include "cm-regbits-44xx.h"
-#include "prm.h"
+#include "prm44xx.h"
+#include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
+#include "scrm44xx.h"
+
+/* OMAP4 modulemode control */
+#define OMAP4430_MODULEMODE_HWCTRL			0
+#define OMAP4430_MODULEMODE_SWCTRL			1
 
 /* Root clocks */
 
@@ -47,7 +54,9 @@ static struct clk extalt_clkin_ck = {
 static struct clk pad_clks_ck = {
 	.name		= "pad_clks_ck",
 	.rate		= 12000000,
-	.ops		= &clkops_null,
+	.ops            = &clkops_omap2_dflt,
+	.enable_reg     = OMAP4430_CM_CLKSEL_ABE,
+	.enable_bit     = OMAP4430_PAD_CLKS_GATE_SHIFT,
 };
 
 static struct clk pad_slimbus_core_clks_ck = {
@@ -65,7 +74,9 @@ static struct clk secure_32k_clk_src_ck = {
 static struct clk slimbus_clk = {
 	.name		= "slimbus_clk",
 	.rate		= 12000000,
-	.ops		= &clkops_null,
+	.ops            = &clkops_omap2_dflt,
+	.enable_reg     = OMAP4430_CM_CLKSEL_ABE,
+	.enable_bit     = OMAP4430_SLIMBUS_CLK_GATE_SHIFT,
 };
 
 static struct clk sys_32k_ck = {
@@ -265,18 +276,71 @@ static struct clk dpll_abe_ck = {
 	.set_rate	= &omap3_noncore_dpll_set_rate,
 };
 
+static struct clk dpll_abe_x2_ck = {
+	.name		= "dpll_abe_x2_ck",
+	.parent		= &dpll_abe_ck,
+	.ops		= &clkops_null,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel_rate div31_1to31_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 3, .val = 3, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 4, .flags = RATE_IN_4430 },
+	{ .div = 5, .val = 5, .flags = RATE_IN_4430 },
+	{ .div = 6, .val = 6, .flags = RATE_IN_4430 },
+	{ .div = 7, .val = 7, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 8, .flags = RATE_IN_4430 },
+	{ .div = 9, .val = 9, .flags = RATE_IN_4430 },
+	{ .div = 10, .val = 10, .flags = RATE_IN_4430 },
+	{ .div = 11, .val = 11, .flags = RATE_IN_4430 },
+	{ .div = 12, .val = 12, .flags = RATE_IN_4430 },
+	{ .div = 13, .val = 13, .flags = RATE_IN_4430 },
+	{ .div = 14, .val = 14, .flags = RATE_IN_4430 },
+	{ .div = 15, .val = 15, .flags = RATE_IN_4430 },
+	{ .div = 16, .val = 16, .flags = RATE_IN_4430 },
+	{ .div = 17, .val = 17, .flags = RATE_IN_4430 },
+	{ .div = 18, .val = 18, .flags = RATE_IN_4430 },
+	{ .div = 19, .val = 19, .flags = RATE_IN_4430 },
+	{ .div = 20, .val = 20, .flags = RATE_IN_4430 },
+	{ .div = 21, .val = 21, .flags = RATE_IN_4430 },
+	{ .div = 22, .val = 22, .flags = RATE_IN_4430 },
+	{ .div = 23, .val = 23, .flags = RATE_IN_4430 },
+	{ .div = 24, .val = 24, .flags = RATE_IN_4430 },
+	{ .div = 25, .val = 25, .flags = RATE_IN_4430 },
+	{ .div = 26, .val = 26, .flags = RATE_IN_4430 },
+	{ .div = 27, .val = 27, .flags = RATE_IN_4430 },
+	{ .div = 28, .val = 28, .flags = RATE_IN_4430 },
+	{ .div = 29, .val = 29, .flags = RATE_IN_4430 },
+	{ .div = 30, .val = 30, .flags = RATE_IN_4430 },
+	{ .div = 31, .val = 31, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel dpll_abe_m2x2_div[] = {
+	{ .parent = &dpll_abe_x2_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
 static struct clk dpll_abe_m2x2_ck = {
 	.name		= "dpll_abe_m2x2_ck",
-	.parent		= &dpll_abe_ck,
+	.parent		= &dpll_abe_x2_ck,
+	.clksel		= dpll_abe_m2x2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
 };
 
 static struct clk abe_24m_fclk = {
 	.name		= "abe_24m_fclk",
 	.parent		= &dpll_abe_m2x2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 8,
+	.recalc		= &omap_fixed_divisor_recalc,
 };
 
 static const struct clksel_rate div3_1to4_rates[] = {
@@ -326,50 +390,10 @@ static struct clk aess_fclk = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static const struct clksel_rate div31_1to31_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
-	{ .div = 2, .val = 2, .flags = RATE_IN_4430 },
-	{ .div = 3, .val = 3, .flags = RATE_IN_4430 },
-	{ .div = 4, .val = 4, .flags = RATE_IN_4430 },
-	{ .div = 5, .val = 5, .flags = RATE_IN_4430 },
-	{ .div = 6, .val = 6, .flags = RATE_IN_4430 },
-	{ .div = 7, .val = 7, .flags = RATE_IN_4430 },
-	{ .div = 8, .val = 8, .flags = RATE_IN_4430 },
-	{ .div = 9, .val = 9, .flags = RATE_IN_4430 },
-	{ .div = 10, .val = 10, .flags = RATE_IN_4430 },
-	{ .div = 11, .val = 11, .flags = RATE_IN_4430 },
-	{ .div = 12, .val = 12, .flags = RATE_IN_4430 },
-	{ .div = 13, .val = 13, .flags = RATE_IN_4430 },
-	{ .div = 14, .val = 14, .flags = RATE_IN_4430 },
-	{ .div = 15, .val = 15, .flags = RATE_IN_4430 },
-	{ .div = 16, .val = 16, .flags = RATE_IN_4430 },
-	{ .div = 17, .val = 17, .flags = RATE_IN_4430 },
-	{ .div = 18, .val = 18, .flags = RATE_IN_4430 },
-	{ .div = 19, .val = 19, .flags = RATE_IN_4430 },
-	{ .div = 20, .val = 20, .flags = RATE_IN_4430 },
-	{ .div = 21, .val = 21, .flags = RATE_IN_4430 },
-	{ .div = 22, .val = 22, .flags = RATE_IN_4430 },
-	{ .div = 23, .val = 23, .flags = RATE_IN_4430 },
-	{ .div = 24, .val = 24, .flags = RATE_IN_4430 },
-	{ .div = 25, .val = 25, .flags = RATE_IN_4430 },
-	{ .div = 26, .val = 26, .flags = RATE_IN_4430 },
-	{ .div = 27, .val = 27, .flags = RATE_IN_4430 },
-	{ .div = 28, .val = 28, .flags = RATE_IN_4430 },
-	{ .div = 29, .val = 29, .flags = RATE_IN_4430 },
-	{ .div = 30, .val = 30, .flags = RATE_IN_4430 },
-	{ .div = 31, .val = 31, .flags = RATE_IN_4430 },
-	{ .div = 0 },
-};
-
-static const struct clksel dpll_abe_m3_div[] = {
-	{ .parent = &dpll_abe_ck, .rates = div31_1to31_rates },
-	{ .parent = NULL },
-};
-
-static struct clk dpll_abe_m3_ck = {
-	.name		= "dpll_abe_m3_ck",
-	.parent		= &dpll_abe_ck,
-	.clksel		= dpll_abe_m3_div,
+static struct clk dpll_abe_m3x2_ck = {
+	.name		= "dpll_abe_m3x2_ck",
+	.parent		= &dpll_abe_x2_ck,
+	.clksel		= dpll_abe_m2x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_ABE,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
 	.ops		= &clkops_null,
@@ -380,7 +404,7 @@ static struct clk dpll_abe_m3_ck = {
 
 static const struct clksel core_hsd_byp_clk_mux_sel[] = {
 	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_abe_m3_ck, .rates = div_1_1_rates },
+	{ .parent = &dpll_abe_m3x2_ck, .rates = div_1_1_rates },
 	{ .parent = NULL },
 };
 
@@ -424,15 +448,22 @@ static struct clk dpll_core_ck = {
 	.recalc		= &omap3_dpll_recalc,
 };
 
-static const struct clksel dpll_core_m6_div[] = {
-	{ .parent = &dpll_core_ck, .rates = div31_1to31_rates },
+static struct clk dpll_core_x2_ck = {
+	.name		= "dpll_core_x2_ck",
+	.parent		= &dpll_core_ck,
+	.ops		= &clkops_null,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel dpll_core_m6x2_div[] = {
+	{ .parent = &dpll_core_x2_ck, .rates = div31_1to31_rates },
 	{ .parent = NULL },
 };
 
-static struct clk dpll_core_m6_ck = {
-	.name		= "dpll_core_m6_ck",
-	.parent		= &dpll_core_ck,
-	.clksel		= dpll_core_m6_div,
+static struct clk dpll_core_m6x2_ck = {
+	.name		= "dpll_core_m6x2_ck",
+	.parent		= &dpll_core_x2_ck,
+	.clksel		= dpll_core_m6x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M6_DPLL_CORE,
 	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK,
 	.ops		= &clkops_null,
@@ -443,7 +474,7 @@ static struct clk dpll_core_m6_ck = {
 
 static const struct clksel dbgclk_mux_sel[] = {
 	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m6_ck, .rates = div_1_1_rates },
+	{ .parent = &dpll_core_m6x2_ck, .rates = div_1_1_rates },
 	{ .parent = NULL },
 };
 
@@ -454,10 +485,15 @@ static struct clk dbgclk_mux_ck = {
 	.recalc		= &followparent_recalc,
 };
 
+static const struct clksel dpll_core_m2_div[] = {
+	{ .parent = &dpll_core_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
 static struct clk dpll_core_m2_ck = {
 	.name		= "dpll_core_m2_ck",
 	.parent		= &dpll_core_ck,
-	.clksel		= dpll_core_m6_div,
+	.clksel		= dpll_core_m2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_CORE,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
 	.ops		= &clkops_null,
@@ -470,13 +506,14 @@ static struct clk ddrphy_ck = {
 	.name		= "ddrphy_ck",
 	.parent		= &dpll_core_m2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 2,
+	.recalc		= &omap_fixed_divisor_recalc,
 };
 
-static struct clk dpll_core_m5_ck = {
-	.name		= "dpll_core_m5_ck",
-	.parent		= &dpll_core_ck,
-	.clksel		= dpll_core_m6_div,
+static struct clk dpll_core_m5x2_ck = {
+	.name		= "dpll_core_m5x2_ck",
+	.parent		= &dpll_core_x2_ck,
+	.clksel		= dpll_core_m6x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_CORE,
 	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
 	.ops		= &clkops_null,
@@ -486,13 +523,13 @@ static struct clk dpll_core_m5_ck = {
 };
 
 static const struct clksel div_core_div[] = {
-	{ .parent = &dpll_core_m5_ck, .rates = div2_1to2_rates },
+	{ .parent = &dpll_core_m5x2_ck, .rates = div2_1to2_rates },
 	{ .parent = NULL },
 };
 
 static struct clk div_core_ck = {
 	.name		= "div_core_ck",
-	.parent		= &dpll_core_m5_ck,
+	.parent		= &dpll_core_m5x2_ck,
 	.clksel		= div_core_div,
 	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
 	.clksel_mask	= OMAP4430_CLKSEL_CORE_MASK,
@@ -511,13 +548,13 @@ static const struct clksel_rate div4_1to8_rates[] = {
 };
 
 static const struct clksel div_iva_hs_clk_div[] = {
-	{ .parent = &dpll_core_m5_ck, .rates = div4_1to8_rates },
+	{ .parent = &dpll_core_m5x2_ck, .rates = div4_1to8_rates },
 	{ .parent = NULL },
 };
 
 static struct clk div_iva_hs_clk = {
 	.name		= "div_iva_hs_clk",
-	.parent		= &dpll_core_m5_ck,
+	.parent		= &dpll_core_m5x2_ck,
 	.clksel		= div_iva_hs_clk_div,
 	.clksel_reg	= OMAP4430_CM_BYPCLK_DPLL_IVA,
 	.clksel_mask	= OMAP4430_CLKSEL_0_1_MASK,
@@ -529,7 +566,7 @@ static struct clk div_iva_hs_clk = {
 
 static struct clk div_mpu_hs_clk = {
 	.name		= "div_mpu_hs_clk",
-	.parent		= &dpll_core_m5_ck,
+	.parent		= &dpll_core_m5x2_ck,
 	.clksel		= div_iva_hs_clk_div,
 	.clksel_reg	= OMAP4430_CM_BYPCLK_DPLL_MPU,
 	.clksel_mask	= OMAP4430_CLKSEL_0_1_MASK,
@@ -539,10 +576,10 @@ static struct clk div_mpu_hs_clk = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static struct clk dpll_core_m4_ck = {
-	.name		= "dpll_core_m4_ck",
-	.parent		= &dpll_core_ck,
-	.clksel		= dpll_core_m6_div,
+static struct clk dpll_core_m4x2_ck = {
+	.name		= "dpll_core_m4x2_ck",
+	.parent		= &dpll_core_x2_ck,
+	.clksel		= dpll_core_m6x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_CORE,
 	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
 	.ops		= &clkops_null,
@@ -553,15 +590,21 @@ static struct clk dpll_core_m4_ck = {
 
 static struct clk dll_clk_div_ck = {
 	.name		= "dll_clk_div_ck",
-	.parent		= &dpll_core_m4_ck,
+	.parent		= &dpll_core_m4x2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 2,
+	.recalc		= &omap_fixed_divisor_recalc,
+};
+
+static const struct clksel dpll_abe_m2_div[] = {
+	{ .parent = &dpll_abe_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
 };
 
 static struct clk dpll_abe_m2_ck = {
 	.name		= "dpll_abe_m2_ck",
 	.parent		= &dpll_abe_ck,
-	.clksel		= dpll_abe_m3_div,
+	.clksel		= dpll_abe_m2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
 	.ops		= &clkops_null,
@@ -570,22 +613,24 @@ static struct clk dpll_abe_m2_ck = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static struct clk dpll_core_m3_ck = {
-	.name		= "dpll_core_m3_ck",
-	.parent		= &dpll_core_ck,
-	.clksel		= dpll_core_m6_div,
+static struct clk dpll_core_m3x2_ck = {
+	.name		= "dpll_core_m3x2_ck",
+	.parent		= &dpll_core_x2_ck,
+	.clksel		= dpll_core_m6x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_CORE,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-	.ops		= &clkops_null,
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DIV_M3_DPLL_CORE,
+	.enable_bit	= OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT,
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static struct clk dpll_core_m7_ck = {
-	.name		= "dpll_core_m7_ck",
-	.parent		= &dpll_core_ck,
-	.clksel		= dpll_core_m6_div,
+static struct clk dpll_core_m7x2_ck = {
+	.name		= "dpll_core_m7x2_ck",
+	.parent		= &dpll_core_x2_ck,
+	.clksel		= dpll_core_m6x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M7_DPLL_CORE,
 	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK,
 	.ops		= &clkops_null,
@@ -603,8 +648,12 @@ static const struct clksel iva_hsd_byp_clk_mux_sel[] = {
 static struct clk iva_hsd_byp_clk_mux_ck = {
 	.name		= "iva_hsd_byp_clk_mux_ck",
 	.parent		= &sys_clkin_ck,
+	.clksel		= iva_hsd_byp_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_DPLL_IVA,
+	.clksel_mask	= OMAP4430_DPLL_BYP_CLKSEL_MASK,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 /* DPLL_IVA */
@@ -638,15 +687,22 @@ static struct clk dpll_iva_ck = {
 	.set_rate	= &omap3_noncore_dpll_set_rate,
 };
 
-static const struct clksel dpll_iva_m4_div[] = {
-	{ .parent = &dpll_iva_ck, .rates = div31_1to31_rates },
+static struct clk dpll_iva_x2_ck = {
+	.name		= "dpll_iva_x2_ck",
+	.parent		= &dpll_iva_ck,
+	.ops		= &clkops_null,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel dpll_iva_m4x2_div[] = {
+	{ .parent = &dpll_iva_x2_ck, .rates = div31_1to31_rates },
 	{ .parent = NULL },
 };
 
-static struct clk dpll_iva_m4_ck = {
-	.name		= "dpll_iva_m4_ck",
-	.parent		= &dpll_iva_ck,
-	.clksel		= dpll_iva_m4_div,
+static struct clk dpll_iva_m4x2_ck = {
+	.name		= "dpll_iva_m4x2_ck",
+	.parent		= &dpll_iva_x2_ck,
+	.clksel		= dpll_iva_m4x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_IVA,
 	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
 	.ops		= &clkops_null,
@@ -655,10 +711,10 @@ static struct clk dpll_iva_m4_ck = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static struct clk dpll_iva_m5_ck = {
-	.name		= "dpll_iva_m5_ck",
-	.parent		= &dpll_iva_ck,
-	.clksel		= dpll_iva_m4_div,
+static struct clk dpll_iva_m5x2_ck = {
+	.name		= "dpll_iva_m5x2_ck",
+	.parent		= &dpll_iva_x2_ck,
+	.clksel		= dpll_iva_m4x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_IVA,
 	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
 	.ops		= &clkops_null,
@@ -717,9 +773,10 @@ static struct clk dpll_mpu_m2_ck = {
 
 static struct clk per_hs_clk_div_ck = {
 	.name		= "per_hs_clk_div_ck",
-	.parent		= &dpll_abe_m3_ck,
+	.parent		= &dpll_abe_m3x2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 2,
+	.recalc		= &omap_fixed_divisor_recalc,
 };
 
 static const struct clksel per_hsd_byp_clk_mux_sel[] = {
@@ -787,29 +844,48 @@ static struct clk dpll_per_m2_ck = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
+static struct clk dpll_per_x2_ck = {
+	.name		= "dpll_per_x2_ck",
+	.parent		= &dpll_per_ck,
+	.ops		= &clkops_null,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel dpll_per_m2x2_div[] = {
+	{ .parent = &dpll_per_x2_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
 static struct clk dpll_per_m2x2_ck = {
 	.name		= "dpll_per_m2x2_ck",
-	.parent		= &dpll_per_ck,
+	.parent		= &dpll_per_x2_ck,
+	.clksel		= dpll_per_m2x2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static struct clk dpll_per_m3_ck = {
-	.name		= "dpll_per_m3_ck",
-	.parent		= &dpll_per_ck,
-	.clksel		= dpll_per_m2_div,
+static struct clk dpll_per_m3x2_ck = {
+	.name		= "dpll_per_m3x2_ck",
+	.parent		= &dpll_per_x2_ck,
+	.clksel		= dpll_per_m2x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_PER,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
-	.ops		= &clkops_null,
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DIV_M3_DPLL_PER,
+	.enable_bit	= OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT,
 	.recalc		= &omap2_clksel_recalc,
 	.round_rate	= &omap2_clksel_round_rate,
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static struct clk dpll_per_m4_ck = {
-	.name		= "dpll_per_m4_ck",
-	.parent		= &dpll_per_ck,
-	.clksel		= dpll_per_m2_div,
+static struct clk dpll_per_m4x2_ck = {
+	.name		= "dpll_per_m4x2_ck",
+	.parent		= &dpll_per_x2_ck,
+	.clksel		= dpll_per_m2x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_PER,
 	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
 	.ops		= &clkops_null,
@@ -818,10 +894,10 @@ static struct clk dpll_per_m4_ck = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static struct clk dpll_per_m5_ck = {
-	.name		= "dpll_per_m5_ck",
-	.parent		= &dpll_per_ck,
-	.clksel		= dpll_per_m2_div,
+static struct clk dpll_per_m5x2_ck = {
+	.name		= "dpll_per_m5x2_ck",
+	.parent		= &dpll_per_x2_ck,
+	.clksel		= dpll_per_m2x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_PER,
 	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
 	.ops		= &clkops_null,
@@ -830,10 +906,10 @@ static struct clk dpll_per_m5_ck = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static struct clk dpll_per_m6_ck = {
-	.name		= "dpll_per_m6_ck",
-	.parent		= &dpll_per_ck,
-	.clksel		= dpll_per_m2_div,
+static struct clk dpll_per_m6x2_ck = {
+	.name		= "dpll_per_m6x2_ck",
+	.parent		= &dpll_per_x2_ck,
+	.clksel		= dpll_per_m2x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M6_DPLL_PER,
 	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK,
 	.ops		= &clkops_null,
@@ -842,10 +918,10 @@ static struct clk dpll_per_m6_ck = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
-static struct clk dpll_per_m7_ck = {
-	.name		= "dpll_per_m7_ck",
-	.parent		= &dpll_per_ck,
-	.clksel		= dpll_per_m2_div,
+static struct clk dpll_per_m7x2_ck = {
+	.name		= "dpll_per_m7x2_ck",
+	.parent		= &dpll_per_x2_ck,
+	.clksel		= dpll_per_m2x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M7_DPLL_PER,
 	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK,
 	.ops		= &clkops_null,
@@ -868,6 +944,7 @@ static struct dpll_data dpll_unipro_dd = {
 	.enable_mask	= OMAP4430_DPLL_EN_MASK,
 	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
 	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.sddiv_mask	= OMAP4430_DPLL_SD_DIV_MASK,
 	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
 	.max_divider	= OMAP4430_MAX_DPLL_DIV,
 	.min_divider	= 1,
@@ -885,14 +962,21 @@ static struct clk dpll_unipro_ck = {
 	.set_rate	= &omap3_noncore_dpll_set_rate,
 };
 
+static struct clk dpll_unipro_x2_ck = {
+	.name		= "dpll_unipro_x2_ck",
+	.parent		= &dpll_unipro_ck,
+	.ops		= &clkops_null,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
 static const struct clksel dpll_unipro_m2x2_div[] = {
-	{ .parent = &dpll_unipro_ck, .rates = div31_1to31_rates },
+	{ .parent = &dpll_unipro_x2_ck, .rates = div31_1to31_rates },
 	{ .parent = NULL },
 };
 
 static struct clk dpll_unipro_m2x2_ck = {
 	.name		= "dpll_unipro_m2x2_ck",
-	.parent		= &dpll_unipro_ck,
+	.parent		= &dpll_unipro_x2_ck,
 	.clksel		= dpll_unipro_m2x2_div,
 	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_UNIPRO,
 	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
@@ -904,16 +988,17 @@ static struct clk dpll_unipro_m2x2_ck = {
 
 static struct clk usb_hs_clk_div_ck = {
 	.name		= "usb_hs_clk_div_ck",
-	.parent		= &dpll_abe_m3_ck,
+	.parent		= &dpll_abe_m3x2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 3,
+	.recalc		= &omap_fixed_divisor_recalc,
 };
 
 /* DPLL_USB */
 static struct dpll_data dpll_usb_dd = {
 	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_USB,
 	.clk_bypass	= &usb_hs_clk_div_ck,
-	.flags		= DPLL_J_TYPE | DPLL_NO_DCO_SEL,
+	.flags		= DPLL_J_TYPE,
 	.clk_ref	= &sys_clkin_ck,
 	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_USB,
 	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
@@ -967,7 +1052,7 @@ static struct clk dpll_usb_m2_ck = {
 
 static const struct clksel ducati_clk_mux_sel[] = {
 	{ .parent = &div_core_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m6_ck, .rates = div_1_1_rates },
+	{ .parent = &dpll_per_m6x2_ck, .rates = div_1_1_rates },
 	{ .parent = NULL },
 };
 
@@ -986,21 +1071,24 @@ static struct clk func_12m_fclk = {
 	.name		= "func_12m_fclk",
 	.parent		= &dpll_per_m2x2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 16,
+	.recalc		= &omap_fixed_divisor_recalc,
 };
 
 static struct clk func_24m_clk = {
 	.name		= "func_24m_clk",
 	.parent		= &dpll_per_m2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 4,
+	.recalc		= &omap_fixed_divisor_recalc,
 };
 
 static struct clk func_24mc_fclk = {
 	.name		= "func_24mc_fclk",
 	.parent		= &dpll_per_m2x2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 8,
+	.recalc		= &omap_fixed_divisor_recalc,
 };
 
 static const struct clksel_rate div2_4to8_rates[] = {
@@ -1030,7 +1118,8 @@ static struct clk func_48mc_fclk = {
 	.name		= "func_48mc_fclk",
 	.parent		= &dpll_per_m2x2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 4,
+	.recalc		= &omap_fixed_divisor_recalc,
 };
 
 static const struct clksel_rate div2_2to4_rates[] = {
@@ -1040,13 +1129,13 @@ static const struct clksel_rate div2_2to4_rates[] = {
 };
 
 static const struct clksel func_64m_fclk_div[] = {
-	{ .parent = &dpll_per_m4_ck, .rates = div2_2to4_rates },
+	{ .parent = &dpll_per_m4x2_ck, .rates = div2_2to4_rates },
 	{ .parent = NULL },
 };
 
 static struct clk func_64m_fclk = {
 	.name		= "func_64m_fclk",
-	.parent		= &dpll_per_m4_ck,
+	.parent		= &dpll_per_m4x2_ck,
 	.clksel		= func_64m_fclk_div,
 	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
 	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
@@ -1147,7 +1236,8 @@ static struct clk lp_clk_div_ck = {
 	.name		= "lp_clk_div_ck",
 	.parent		= &dpll_abe_m2x2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 16,
+	.recalc		= &omap_fixed_divisor_recalc,
 };
 
 static const struct clksel l4_wkup_clk_mux_sel[] = {
@@ -1215,12 +1305,13 @@ static struct clk per_abe_24m_fclk = {
 	.name		= "per_abe_24m_fclk",
 	.parent		= &dpll_abe_m2_ck,
 	.ops		= &clkops_null,
-	.recalc		= &followparent_recalc,
+	.fixed_div	= 4,
+	.recalc		= &omap_fixed_divisor_recalc,
 };
 
 static const struct clksel pmd_stm_clock_mux_sel[] = {
 	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_core_m6_ck, .rates = div_1_1_rates },
+	{ .parent = &dpll_core_m6x2_ck, .rates = div_1_1_rates },
 	{ .parent = &tie_low_clock_ck, .rates = div_1_2_rates },
 	{ .parent = NULL },
 };
@@ -1354,7 +1445,7 @@ static struct clk dsp_fck = {
 	.enable_reg	= OMAP4430_CM_TESLA_TESLA_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
 	.clkdm_name	= "tesla_clkdm",
-	.parent		= &dpll_iva_m4_ck,
+	.parent		= &dpll_iva_m4x2_ck,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1384,7 +1475,7 @@ static struct clk dss_dss_clk = {
 	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
 	.enable_bit	= OMAP4430_OPTFCLKEN_DSSCLK_SHIFT,
 	.clkdm_name	= "l3_dss_clkdm",
-	.parent		= &dpll_per_m5_ck,
+	.parent		= &dpll_per_m5x2_ck,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1441,14 +1532,14 @@ static struct clk emif2_fck = {
 };
 
 static const struct clksel fdif_fclk_div[] = {
-	{ .parent = &dpll_per_m4_ck, .rates = div3_1to4_rates },
+	{ .parent = &dpll_per_m4x2_ck, .rates = div3_1to4_rates },
 	{ .parent = NULL },
 };
 
 /* Merged fdif_fclk into fdif */
 static struct clk fdif_fck = {
 	.name		= "fdif_fck",
-	.parent		= &dpll_per_m4_ck,
+	.parent		= &dpll_per_m4x2_ck,
 	.clksel		= fdif_fclk_div,
 	.clksel_reg	= OMAP4430_CM_CAM_FDIF_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_FCLK_MASK,
@@ -1602,15 +1693,15 @@ static struct clk gpmc_ick = {
 };
 
 static const struct clksel sgx_clk_mux_sel[] = {
-	{ .parent = &dpll_core_m7_ck, .rates = div_1_0_rates },
-	{ .parent = &dpll_per_m7_ck, .rates = div_1_1_rates },
+	{ .parent = &dpll_core_m7x2_ck, .rates = div_1_0_rates },
+	{ .parent = &dpll_per_m7x2_ck, .rates = div_1_1_rates },
 	{ .parent = NULL },
 };
 
 /* Merged sgx_clk_mux into gpu */
 static struct clk gpu_fck = {
 	.name		= "gpu_fck",
-	.parent		= &dpll_core_m7_ck,
+	.parent		= &dpll_core_m7x2_ck,
 	.clksel		= sgx_clk_mux_sel,
 	.init		= &omap2_init_clksel_parent,
 	.clksel_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
@@ -1729,7 +1820,7 @@ static struct clk iva_fck = {
 	.enable_reg	= OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
 	.clkdm_name	= "ivahd_clkdm",
-	.parent		= &dpll_iva_m5_ck,
+	.parent		= &dpll_iva_m5x2_ck,
 	.recalc		= &followparent_recalc,
 };
 
@@ -1749,6 +1840,7 @@ static struct clk l3_instr_ick = {
 	.enable_reg	= OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
 	.clkdm_name	= "l3_instr_clkdm",
+	.flags		= ENABLE_ON_INIT,
 	.parent		= &l3_div_ck,
 	.recalc		= &followparent_recalc,
 };
@@ -1759,6 +1851,7 @@ static struct clk l3_main_3_ick = {
 	.enable_reg	= OMAP4430_CM_L3INSTR_L3_3_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
 	.clkdm_name	= "l3_instr_clkdm",
+	.flags		= ENABLE_ON_INIT,
 	.parent		= &l3_div_ck,
 	.recalc		= &followparent_recalc,
 };
@@ -2063,6 +2156,7 @@ static struct clk ocp_wp_noc_ick = {
 	.enable_reg	= OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
 	.clkdm_name	= "l3_instr_clkdm",
+	.flags		= ENABLE_ON_INIT,
 	.parent		= &l3_div_ck,
 	.recalc		= &followparent_recalc,
 };
@@ -2093,7 +2187,7 @@ static struct clk sl2if_ick = {
 	.enable_reg	= OMAP4430_CM_IVAHD_SL2_CLKCTRL,
 	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
 	.clkdm_name	= "ivahd_clkdm",
-	.parent		= &dpll_iva_m5_ck,
+	.parent		= &dpll_iva_m5x2_ck,
 	.recalc		= &followparent_recalc,
 };
 
@@ -2438,36 +2532,6 @@ static struct clk usb_host_fs_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk usb_host_hs_utmi_p3_clk = {
-	.name		= "usb_host_hs_utmi_p3_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &init_60m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_host_hs_hsic60m_p1_clk = {
-	.name		= "usb_host_hs_hsic60m_p1_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &init_60m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usb_host_hs_hsic60m_p2_clk = {
-	.name		= "usb_host_hs_hsic60m_p2_clk",
-	.ops		= &clkops_omap2_dflt,
-	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
-	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT,
-	.clkdm_name	= "l3_init_clkdm",
-	.parent		= &init_60m_fclk,
-	.recalc		= &followparent_recalc,
-};
-
 static const struct clksel utmi_p1_gfclk_sel[] = {
 	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
 	{ .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates },
@@ -2522,6 +2586,16 @@ static struct clk usb_host_hs_utmi_p2_clk = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk usb_host_hs_utmi_p3_clk = {
+	.name		= "usb_host_hs_utmi_p3_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &init_60m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk usb_host_hs_hsic480m_p1_clk = {
 	.name		= "usb_host_hs_hsic480m_p1_clk",
 	.ops		= &clkops_omap2_dflt,
@@ -2532,6 +2606,26 @@ static struct clk usb_host_hs_hsic480m_p1_clk = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk usb_host_hs_hsic60m_p1_clk = {
+	.name		= "usb_host_hs_hsic60m_p1_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &init_60m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_host_hs_hsic60m_p2_clk = {
+	.name		= "usb_host_hs_hsic60m_p2_clk",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &init_60m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk usb_host_hs_hsic480m_p2_clk = {
 	.name		= "usb_host_hs_hsic480m_p2_clk",
 	.ops		= &clkops_omap2_dflt,
@@ -2656,13 +2750,13 @@ static const struct clksel_rate div2_14to18_rates[] = {
 };
 
 static const struct clksel usim_fclk_div[] = {
-	{ .parent = &dpll_per_m4_ck, .rates = div2_14to18_rates },
+	{ .parent = &dpll_per_m4x2_ck, .rates = div2_14to18_rates },
 	{ .parent = NULL },
 };
 
 static struct clk usim_ck = {
 	.name		= "usim_ck",
-	.parent		= &dpll_per_m4_ck,
+	.parent		= &dpll_per_m4x2_ck,
 	.clksel		= usim_fclk_div,
 	.clksel_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
 	.clksel_mask	= OMAP4430_CLKSEL_DIV_MASK,
@@ -2747,6 +2841,168 @@ static struct clk trace_clk_div_ck = {
 	.set_rate	= &omap2_clksel_set_rate,
 };
 
+/* SCRM aux clk nodes */
+
+static const struct clksel auxclk_sel[] = {
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+	{ .parent = &dpll_core_m3x2_ck, .rates = div_1_1_rates },
+	{ .parent = &dpll_per_m3x2_ck, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk auxclk0_ck = {
+	.name		= "auxclk0_ck",
+	.parent		= &sys_clkin_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_omap2_dflt,
+	.clksel		= auxclk_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLK0,
+	.clksel_mask	= OMAP4_SRCSELECT_MASK,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4_SCRM_AUXCLK0,
+	.enable_bit	= OMAP4_ENABLE_SHIFT,
+};
+
+static struct clk auxclk1_ck = {
+	.name		= "auxclk1_ck",
+	.parent		= &sys_clkin_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_omap2_dflt,
+	.clksel		= auxclk_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLK1,
+	.clksel_mask	= OMAP4_SRCSELECT_MASK,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4_SCRM_AUXCLK1,
+	.enable_bit	= OMAP4_ENABLE_SHIFT,
+};
+
+static struct clk auxclk2_ck = {
+	.name		= "auxclk2_ck",
+	.parent		= &sys_clkin_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_omap2_dflt,
+	.clksel		= auxclk_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLK2,
+	.clksel_mask	= OMAP4_SRCSELECT_MASK,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4_SCRM_AUXCLK2,
+	.enable_bit	= OMAP4_ENABLE_SHIFT,
+};
+static struct clk auxclk3_ck = {
+	.name		= "auxclk3_ck",
+	.parent		= &sys_clkin_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_omap2_dflt,
+	.clksel		= auxclk_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLK3,
+	.clksel_mask	= OMAP4_SRCSELECT_MASK,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4_SCRM_AUXCLK3,
+	.enable_bit	= OMAP4_ENABLE_SHIFT,
+};
+
+static struct clk auxclk4_ck = {
+	.name		= "auxclk4_ck",
+	.parent		= &sys_clkin_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_omap2_dflt,
+	.clksel		= auxclk_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLK4,
+	.clksel_mask	= OMAP4_SRCSELECT_MASK,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4_SCRM_AUXCLK4,
+	.enable_bit	= OMAP4_ENABLE_SHIFT,
+};
+
+static struct clk auxclk5_ck = {
+	.name		= "auxclk5_ck",
+	.parent		= &sys_clkin_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_omap2_dflt,
+	.clksel		= auxclk_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLK5,
+	.clksel_mask	= OMAP4_SRCSELECT_MASK,
+	.recalc		= &omap2_clksel_recalc,
+	.enable_reg	= OMAP4_SCRM_AUXCLK5,
+	.enable_bit	= OMAP4_ENABLE_SHIFT,
+};
+
+static const struct clksel auxclkreq_sel[] = {
+	{ .parent = &auxclk0_ck, .rates = div_1_0_rates },
+	{ .parent = &auxclk1_ck, .rates = div_1_1_rates },
+	{ .parent = &auxclk2_ck, .rates = div_1_2_rates },
+	{ .parent = &auxclk3_ck, .rates = div_1_3_rates },
+	{ .parent = &auxclk4_ck, .rates = div_1_4_rates },
+	{ .parent = &auxclk5_ck, .rates = div_1_5_rates },
+	{ .parent = NULL },
+};
+
+static struct clk auxclkreq0_ck = {
+	.name		= "auxclkreq0_ck",
+	.parent		= &auxclk0_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_null,
+	.clksel         = auxclkreq_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ0,
+	.clksel_mask	= OMAP4_MAPPING_MASK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk auxclkreq1_ck = {
+	.name		= "auxclkreq1_ck",
+	.parent		= &auxclk1_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_null,
+	.clksel         = auxclkreq_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ1,
+	.clksel_mask	= OMAP4_MAPPING_MASK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk auxclkreq2_ck = {
+	.name		= "auxclkreq2_ck",
+	.parent		= &auxclk2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_null,
+	.clksel         = auxclkreq_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ2,
+	.clksel_mask	= OMAP4_MAPPING_MASK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk auxclkreq3_ck = {
+	.name		= "auxclkreq3_ck",
+	.parent		= &auxclk3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_null,
+	.clksel         = auxclkreq_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ3,
+	.clksel_mask	= OMAP4_MAPPING_MASK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk auxclkreq4_ck = {
+	.name		= "auxclkreq4_ck",
+	.parent		= &auxclk4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_null,
+	.clksel         = auxclkreq_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ4,
+	.clksel_mask	= OMAP4_MAPPING_MASK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk auxclkreq5_ck = {
+	.name		= "auxclkreq5_ck",
+	.parent		= &auxclk5_ck,
+	.init		= &omap2_init_clksel_parent,
+	.ops		= &clkops_null,
+	.clksel         = auxclkreq_sel,
+	.clksel_reg	= OMAP4_SCRM_AUXCLKREQ5,
+	.clksel_mask	= OMAP4_MAPPING_MASK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
 /*
  * clkdev
  */
@@ -2774,43 +3030,48 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"abe_dpll_bypass_clk_mux_ck",	&abe_dpll_bypass_clk_mux_ck,	CK_443X),
 	CLK(NULL,	"abe_dpll_refclk_mux_ck",	&abe_dpll_refclk_mux_ck,	CK_443X),
 	CLK(NULL,	"dpll_abe_ck",			&dpll_abe_ck,	CK_443X),
+	CLK(NULL,	"dpll_abe_x2_ck",		&dpll_abe_x2_ck,	CK_443X),
 	CLK(NULL,	"dpll_abe_m2x2_ck",		&dpll_abe_m2x2_ck,	CK_443X),
 	CLK(NULL,	"abe_24m_fclk",			&abe_24m_fclk,	CK_443X),
 	CLK(NULL,	"abe_clk",			&abe_clk,	CK_443X),
 	CLK(NULL,	"aess_fclk",			&aess_fclk,	CK_443X),
-	CLK(NULL,	"dpll_abe_m3_ck",		&dpll_abe_m3_ck,	CK_443X),
+	CLK(NULL,	"dpll_abe_m3x2_ck",		&dpll_abe_m3x2_ck,	CK_443X),
 	CLK(NULL,	"core_hsd_byp_clk_mux_ck",	&core_hsd_byp_clk_mux_ck,	CK_443X),
 	CLK(NULL,	"dpll_core_ck",			&dpll_core_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_m6_ck",		&dpll_core_m6_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_x2_ck",		&dpll_core_x2_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m6x2_ck",		&dpll_core_m6x2_ck,	CK_443X),
 	CLK(NULL,	"dbgclk_mux_ck",		&dbgclk_mux_ck,	CK_443X),
 	CLK(NULL,	"dpll_core_m2_ck",		&dpll_core_m2_ck,	CK_443X),
 	CLK(NULL,	"ddrphy_ck",			&ddrphy_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_m5_ck",		&dpll_core_m5_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m5x2_ck",		&dpll_core_m5x2_ck,	CK_443X),
 	CLK(NULL,	"div_core_ck",			&div_core_ck,	CK_443X),
 	CLK(NULL,	"div_iva_hs_clk",		&div_iva_hs_clk,	CK_443X),
 	CLK(NULL,	"div_mpu_hs_clk",		&div_mpu_hs_clk,	CK_443X),
-	CLK(NULL,	"dpll_core_m4_ck",		&dpll_core_m4_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m4x2_ck",		&dpll_core_m4x2_ck,	CK_443X),
 	CLK(NULL,	"dll_clk_div_ck",		&dll_clk_div_ck,	CK_443X),
 	CLK(NULL,	"dpll_abe_m2_ck",		&dpll_abe_m2_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_m3_ck",		&dpll_core_m3_ck,	CK_443X),
-	CLK(NULL,	"dpll_core_m7_ck",		&dpll_core_m7_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m3x2_ck",		&dpll_core_m3x2_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m7x2_ck",		&dpll_core_m7x2_ck,	CK_443X),
 	CLK(NULL,	"iva_hsd_byp_clk_mux_ck",	&iva_hsd_byp_clk_mux_ck,	CK_443X),
 	CLK(NULL,	"dpll_iva_ck",			&dpll_iva_ck,	CK_443X),
-	CLK(NULL,	"dpll_iva_m4_ck",		&dpll_iva_m4_ck,	CK_443X),
-	CLK(NULL,	"dpll_iva_m5_ck",		&dpll_iva_m5_ck,	CK_443X),
+	CLK(NULL,	"dpll_iva_x2_ck",		&dpll_iva_x2_ck,	CK_443X),
+	CLK(NULL,	"dpll_iva_m4x2_ck",		&dpll_iva_m4x2_ck,	CK_443X),
+	CLK(NULL,	"dpll_iva_m5x2_ck",		&dpll_iva_m5x2_ck,	CK_443X),
 	CLK(NULL,	"dpll_mpu_ck",			&dpll_mpu_ck,	CK_443X),
 	CLK(NULL,	"dpll_mpu_m2_ck",		&dpll_mpu_m2_ck,	CK_443X),
 	CLK(NULL,	"per_hs_clk_div_ck",		&per_hs_clk_div_ck,	CK_443X),
 	CLK(NULL,	"per_hsd_byp_clk_mux_ck",	&per_hsd_byp_clk_mux_ck,	CK_443X),
 	CLK(NULL,	"dpll_per_ck",			&dpll_per_ck,	CK_443X),
 	CLK(NULL,	"dpll_per_m2_ck",		&dpll_per_m2_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_x2_ck",		&dpll_per_x2_ck,	CK_443X),
 	CLK(NULL,	"dpll_per_m2x2_ck",		&dpll_per_m2x2_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m3_ck",		&dpll_per_m3_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m4_ck",		&dpll_per_m4_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m5_ck",		&dpll_per_m5_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m6_ck",		&dpll_per_m6_ck,	CK_443X),
-	CLK(NULL,	"dpll_per_m7_ck",		&dpll_per_m7_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m3x2_ck",		&dpll_per_m3x2_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m4x2_ck",		&dpll_per_m4x2_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m5x2_ck",		&dpll_per_m5x2_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m6x2_ck",		&dpll_per_m6x2_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m7x2_ck",		&dpll_per_m7x2_ck,	CK_443X),
 	CLK(NULL,	"dpll_unipro_ck",		&dpll_unipro_ck,	CK_443X),
+	CLK(NULL,	"dpll_unipro_x2_ck",		&dpll_unipro_x2_ck,	CK_443X),
 	CLK(NULL,	"dpll_unipro_m2x2_ck",		&dpll_unipro_m2x2_ck,	CK_443X),
 	CLK(NULL,	"usb_hs_clk_div_ck",		&usb_hs_clk_div_ck,	CK_443X),
 	CLK(NULL,	"dpll_usb_ck",			&dpll_usb_ck,	CK_443X),
@@ -2856,26 +3117,26 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"emif2_fck",			&emif2_fck,	CK_443X),
 	CLK(NULL,	"fdif_fck",			&fdif_fck,	CK_443X),
 	CLK(NULL,	"fpka_fck",			&fpka_fck,	CK_443X),
-	CLK(NULL,	"gpio1_dbck",			&gpio1_dbclk,	CK_443X),
+	CLK(NULL,	"gpio1_dbclk",			&gpio1_dbclk,	CK_443X),
 	CLK(NULL,	"gpio1_ick",			&gpio1_ick,	CK_443X),
-	CLK(NULL,	"gpio2_dbck",			&gpio2_dbclk,	CK_443X),
+	CLK(NULL,	"gpio2_dbclk",			&gpio2_dbclk,	CK_443X),
 	CLK(NULL,	"gpio2_ick",			&gpio2_ick,	CK_443X),
-	CLK(NULL,	"gpio3_dbck",			&gpio3_dbclk,	CK_443X),
+	CLK(NULL,	"gpio3_dbclk",			&gpio3_dbclk,	CK_443X),
 	CLK(NULL,	"gpio3_ick",			&gpio3_ick,	CK_443X),
-	CLK(NULL,	"gpio4_dbck",			&gpio4_dbclk,	CK_443X),
+	CLK(NULL,	"gpio4_dbclk",			&gpio4_dbclk,	CK_443X),
 	CLK(NULL,	"gpio4_ick",			&gpio4_ick,	CK_443X),
-	CLK(NULL,	"gpio5_dbck",			&gpio5_dbclk,	CK_443X),
+	CLK(NULL,	"gpio5_dbclk",			&gpio5_dbclk,	CK_443X),
 	CLK(NULL,	"gpio5_ick",			&gpio5_ick,	CK_443X),
-	CLK(NULL,	"gpio6_dbck",			&gpio6_dbclk,	CK_443X),
+	CLK(NULL,	"gpio6_dbclk",			&gpio6_dbclk,	CK_443X),
 	CLK(NULL,	"gpio6_ick",			&gpio6_ick,	CK_443X),
 	CLK(NULL,	"gpmc_ick",			&gpmc_ick,	CK_443X),
 	CLK(NULL,	"gpu_fck",			&gpu_fck,	CK_443X),
 	CLK("omap2_hdq.0",	"fck",				&hdq1w_fck,	CK_443X),
 	CLK(NULL,	"hsi_fck",			&hsi_fck,	CK_443X),
-	CLK("i2c_omap.1",	"fck",				&i2c1_fck,	CK_443X),
-	CLK("i2c_omap.2",	"fck",				&i2c2_fck,	CK_443X),
-	CLK("i2c_omap.3",	"fck",				&i2c3_fck,	CK_443X),
-	CLK("i2c_omap.4",	"fck",				&i2c4_fck,	CK_443X),
+	CLK("omap_i2c.1",	"fck",				&i2c1_fck,	CK_443X),
+	CLK("omap_i2c.2",	"fck",				&i2c2_fck,	CK_443X),
+	CLK("omap_i2c.3",	"fck",				&i2c3_fck,	CK_443X),
+	CLK("omap_i2c.4",	"fck",				&i2c4_fck,	CK_443X),
 	CLK(NULL,	"ipu_fck",			&ipu_fck,	CK_443X),
 	CLK(NULL,	"iss_ctrlclk",			&iss_ctrlclk,	CK_443X),
 	CLK(NULL,	"iss_fck",			&iss_fck,	CK_443X),
@@ -2937,29 +3198,35 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart3_fck",			&uart3_fck,	CK_443X),
 	CLK(NULL,	"uart4_fck",			&uart4_fck,	CK_443X),
 	CLK(NULL,	"usb_host_fs_fck",		&usb_host_fs_fck,	CK_443X),
-	CLK(NULL,	"usb_host_hs_utmi_p3_clk",	&usb_host_hs_utmi_p3_clk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_hsic60m_p1_clk",	&usb_host_hs_hsic60m_p1_clk,	CK_443X),
-	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk,	CK_443X),
+	CLK("ehci-omap.0",	"fs_fck",		&usb_host_fs_fck,	CK_443X),
 	CLK(NULL,	"utmi_p1_gfclk",		&utmi_p1_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p1_clk",	&usb_host_hs_utmi_p1_clk,	CK_443X),
 	CLK(NULL,	"utmi_p2_gfclk",		&utmi_p2_gfclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_utmi_p2_clk",	&usb_host_hs_utmi_p2_clk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_utmi_p3_clk",	&usb_host_hs_utmi_p3_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_hsic480m_p1_clk",	&usb_host_hs_hsic480m_p1_clk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_hsic60m_p1_clk",	&usb_host_hs_hsic60m_p1_clk,	CK_443X),
+	CLK(NULL,	"usb_host_hs_hsic60m_p2_clk",	&usb_host_hs_hsic60m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_hsic480m_p2_clk",	&usb_host_hs_hsic480m_p2_clk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_func48mclk",	&usb_host_hs_func48mclk,	CK_443X),
 	CLK(NULL,	"usb_host_hs_fck",		&usb_host_hs_fck,	CK_443X),
+	CLK("ehci-omap.0",	"hs_fck",		&usb_host_hs_fck,	CK_443X),
+	CLK("ehci-omap.0",	"usbhost_ick",		&dummy_ck,		CK_443X),
 	CLK(NULL,	"otg_60m_gfclk",		&otg_60m_gfclk,	CK_443X),
 	CLK(NULL,	"usb_otg_hs_xclk",		&usb_otg_hs_xclk,	CK_443X),
-	CLK("musb_hdrc",	"ick",				&usb_otg_hs_ick,	CK_443X),
+	CLK("musb-omap2430",	"ick",				&usb_otg_hs_ick,	CK_443X),
 	CLK(NULL,	"usb_phy_cm_clk32k",		&usb_phy_cm_clk32k,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch2_clk",	&usb_tll_hs_usb_ch2_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch0_clk",	&usb_tll_hs_usb_ch0_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_usb_ch1_clk",	&usb_tll_hs_usb_ch1_clk,	CK_443X),
 	CLK(NULL,	"usb_tll_hs_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK("ehci-omap.0",	"usbtll_ick",		&usb_tll_hs_ick,	CK_443X),
+	CLK("ehci-omap.0",	"usbtll_fck",		&dummy_ck,	CK_443X),
 	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
 	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
 	CLK(NULL,	"usim_fck",			&usim_fck,	CK_443X),
 	CLK("omap_wdt",	"fck",				&wd_timer2_fck,	CK_443X),
+	CLK(NULL,	"mailboxes_ick",		&dummy_ck,	CK_443X),
 	CLK(NULL,	"wd_timer3_fck",		&wd_timer3_fck,	CK_443X),
 	CLK(NULL,	"stm_clk_div_ck",		&stm_clk_div_ck,	CK_443X),
 	CLK(NULL,	"trace_clk_div_ck",		&trace_clk_div_ck,	CK_443X),
@@ -2975,10 +3242,10 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"gpt9_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"gpt10_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"gpt11_ick",			&dummy_ck,	CK_443X),
-	CLK("i2c_omap.1",	"ick",				&dummy_ck,	CK_443X),
-	CLK("i2c_omap.2",	"ick",				&dummy_ck,	CK_443X),
-	CLK("i2c_omap.3",	"ick",				&dummy_ck,	CK_443X),
-	CLK("i2c_omap.4",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap_i2c.1",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap_i2c.2",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap_i2c.3",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omap_i2c.4",	"ick",				&dummy_ck,	CK_443X),
 	CLK("mmci-omap-hs.0",	"ick",				&dummy_ck,	CK_443X),
 	CLK("mmci-omap-hs.1",	"ick",				&dummy_ck,	CK_443X),
 	CLK("mmci-omap-hs.2",	"ick",				&dummy_ck,	CK_443X),
@@ -2997,6 +3264,18 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"uart3_ick",			&dummy_ck,	CK_443X),
 	CLK(NULL,	"uart4_ick",			&dummy_ck,	CK_443X),
 	CLK("omap_wdt",	"ick",				&dummy_ck,	CK_443X),
+	CLK(NULL,	"auxclk0_ck",			&auxclk0_ck,	CK_443X),
+	CLK(NULL,	"auxclk1_ck",			&auxclk1_ck,	CK_443X),
+	CLK(NULL,	"auxclk2_ck",			&auxclk2_ck,	CK_443X),
+	CLK(NULL,	"auxclk3_ck",			&auxclk3_ck,	CK_443X),
+	CLK(NULL,	"auxclk4_ck",			&auxclk4_ck,	CK_443X),
+	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq0_ck",		&auxclkreq0_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq1_ck",		&auxclkreq1_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq2_ck",		&auxclkreq2_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq3_ck",		&auxclkreq3_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq4_ck",		&auxclkreq4_ck,	CK_443X),
+	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck,	CK_443X),
 };
 
 int __init omap4xxx_clk_init(void)
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 6fb61b1a0d4..e20b98636ab 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -13,7 +13,6 @@
  */
 #undef DEBUG
 
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <linux/list.h>
@@ -27,13 +26,16 @@
 
 #include <linux/bitops.h>
 
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "cminst44xx.h"
+#include "prcm44xx.h"
 
 #include <plat/clock.h>
-#include <plat/powerdomain.h>
-#include <plat/clockdomain.h>
+#include "powerdomain.h"
+#include "clockdomain.h"
 #include <plat/prcm.h>
 
 /* clkdm_list contains all registered struct clockdomains */
@@ -141,6 +143,9 @@ static struct clkdm_dep *_clkdm_deps_lookup(struct clockdomain *clkdm,
  * clockdomain is in hardware-supervised mode.	Meant to be called
  * once at clockdomain layer initialization, since these should remain
  * fixed for a particular architecture.  No return value.
+ *
+ * XXX autodeps are deprecated and should be removed at the earliest
+ * opportunity
  */
 static void _autodep_lookup(struct clkdm_autodep *autodep)
 {
@@ -168,6 +173,9 @@ static void _autodep_lookup(struct clkdm_autodep *autodep)
  * Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm'
  * in hardware-supervised mode.  Meant to be called from clock framework
  * when a clock inside clockdomain 'clkdm' is enabled.	No return value.
+ *
+ * XXX autodeps are deprecated and should be removed at the earliest
+ * opportunity
  */
 static void _clkdm_add_autodeps(struct clockdomain *clkdm)
 {
@@ -199,6 +207,9 @@ static void _clkdm_add_autodeps(struct clockdomain *clkdm)
  * Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm'
  * in hardware-supervised mode.  Meant to be called from clock framework
  * when a clock inside clockdomain 'clkdm' is disabled.  No return value.
+ *
+ * XXX autodeps are deprecated and should be removed at the earliest
+ * opportunity
  */
 static void _clkdm_del_autodeps(struct clockdomain *clkdm)
 {
@@ -223,39 +234,56 @@ static void _clkdm_del_autodeps(struct clockdomain *clkdm)
 	}
 }
 
-/*
- * _omap2_clkdm_set_hwsup - set the hwsup idle transition bit
+/**
+ * _enable_hwsup - place a clockdomain into hardware-supervised idle
  * @clkdm: struct clockdomain *
- * @enable: int 0 to disable, 1 to enable
  *
- * Internal helper for actually switching the bit that controls hwsup
- * idle transitions for clkdm.
+ * Place the clockdomain into hardware-supervised idle mode.  No return
+ * value.
+ *
+ * XXX Should this return an error if the clockdomain does not support
+ * hardware-supervised idle mode?
  */
-static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
+static void _enable_hwsup(struct clockdomain *clkdm)
 {
-	u32 bits, v;
-
-	if (cpu_is_omap24xx()) {
-		if (enable)
-			bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
-		else
-			bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
-	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		if (enable)
-			bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
-		else
-			bits = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
-	} else {
+	if (cpu_is_omap24xx())
+		omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					       clkdm->clktrctrl_mask);
+	else if (cpu_is_omap34xx())
+		omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+					       clkdm->clktrctrl_mask);
+	else if (cpu_is_omap44xx())
+		return omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
+						       clkdm->cm_inst,
+						       clkdm->clkdm_offs);
+	else
 		BUG();
-	}
-
-	bits = bits << __ffs(clkdm->clktrctrl_mask);
-
-	v = __raw_readl(clkdm->clkstctrl_reg);
-	v &= ~(clkdm->clktrctrl_mask);
-	v |= bits;
-	__raw_writel(v, clkdm->clkstctrl_reg);
+}
 
+/**
+ * _disable_hwsup - place a clockdomain into software-supervised idle
+ * @clkdm: struct clockdomain *
+ *
+ * Place the clockdomain @clkdm into software-supervised idle mode.
+ * No return value.
+ *
+ * XXX Should this return an error if the clockdomain does not support
+ * software-supervised idle mode?
+ */
+static void _disable_hwsup(struct clockdomain *clkdm)
+{
+	if (cpu_is_omap24xx())
+		omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+						clkdm->clktrctrl_mask);
+	else if (cpu_is_omap34xx())
+		omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+						clkdm->clktrctrl_mask);
+	else if (cpu_is_omap44xx())
+		return omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
+							clkdm->cm_inst,
+							clkdm->clkdm_offs);
+	else
+		BUG();
 }
 
 /* Public functions */
@@ -409,7 +437,7 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 		pr_debug("clockdomain: hardware will wake up %s when %s wakes "
 			 "up\n", clkdm1->name, clkdm2->name);
 
-		prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+		omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
 				     clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
 	}
 
@@ -444,7 +472,7 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 		pr_debug("clockdomain: hardware will no longer wake up %s "
 			 "after %s wakes up\n", clkdm1->name, clkdm2->name);
 
-		prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+		omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
 				       clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
 	}
 
@@ -480,7 +508,7 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 	}
 
 	/* XXX It's faster to return the atomic wkdep_usecount */
-	return prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP,
+	return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP,
 				       (1 << clkdm2->dep_bit));
 }
 
@@ -514,7 +542,7 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
 		atomic_set(&cd->wkdep_usecount, 0);
 	}
 
-	prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, PM_WKDEP);
+	omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, PM_WKDEP);
 
 	return 0;
 }
@@ -553,7 +581,7 @@ int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 		pr_debug("clockdomain: will prevent %s from sleeping if %s "
 			 "is active\n", clkdm1->name, clkdm2->name);
 
-		cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
+		omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
 				    clkdm1->pwrdm.ptr->prcm_offs,
 				    OMAP3430_CM_SLEEPDEP);
 	}
@@ -596,7 +624,7 @@ int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 			 "sleeping if %s is active\n", clkdm1->name,
 			 clkdm2->name);
 
-		cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
+		omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
 				      clkdm1->pwrdm.ptr->prcm_offs,
 				      OMAP3430_CM_SLEEPDEP);
 	}
@@ -639,7 +667,7 @@ int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
 	}
 
 	/* XXX It's faster to return the atomic sleepdep_usecount */
-	return prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
+	return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
 				       OMAP3430_CM_SLEEPDEP,
 				       (1 << clkdm2->dep_bit));
 }
@@ -677,35 +705,13 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
 		atomic_set(&cd->sleepdep_usecount, 0);
 	}
 
-	prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
+	omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
 			       OMAP3430_CM_SLEEPDEP);
 
 	return 0;
 }
 
 /**
- * omap2_clkdm_clktrctrl_read - read the clkdm's current state transition mode
- * @clkdm: struct clkdm * of a clockdomain
- *
- * Return the clockdomain @clkdm current state transition mode from the
- * corresponding domain CM_CLKSTCTRL register.	Returns -EINVAL if @clkdm
- * is NULL or the current mode upon success.
- */
-static int omap2_clkdm_clktrctrl_read(struct clockdomain *clkdm)
-{
-	u32 v;
-
-	if (!clkdm)
-		return -EINVAL;
-
-	v = __raw_readl(clkdm->clkstctrl_reg);
-	v &= clkdm->clktrctrl_mask;
-	v >>= __ffs(clkdm->clktrctrl_mask);
-
-	return v;
-}
-
-/**
  * omap2_clkdm_sleep - force clockdomain sleep transition
  * @clkdm: struct clockdomain *
  *
@@ -729,18 +735,19 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm)
 
 	if (cpu_is_omap24xx()) {
 
-		cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+		omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
 			    clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
 
-	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+	} else if (cpu_is_omap34xx()) {
+
+		omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
+					      clkdm->clktrctrl_mask);
 
-		u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
-			 __ffs(clkdm->clktrctrl_mask));
+	} else if (cpu_is_omap44xx()) {
 
-		u32 v = __raw_readl(clkdm->clkstctrl_reg);
-		v &= ~(clkdm->clktrctrl_mask);
-		v |= bits;
-		__raw_writel(v, clkdm->clkstctrl_reg);
+		omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
+					       clkdm->cm_inst,
+					       clkdm->clkdm_offs);
 
 	} else {
 		BUG();
@@ -773,18 +780,19 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
 
 	if (cpu_is_omap24xx()) {
 
-		cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
+		omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
 			      clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
 
-	} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+	} else if (cpu_is_omap34xx()) {
 
-		u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
-			 __ffs(clkdm->clktrctrl_mask));
+		omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
+					       clkdm->clktrctrl_mask);
 
-		u32 v = __raw_readl(clkdm->clkstctrl_reg);
-		v &= ~(clkdm->clktrctrl_mask);
-		v |= bits;
-		__raw_writel(v, clkdm->clkstctrl_reg);
+	} else if (cpu_is_omap44xx()) {
+
+		omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
+						clkdm->cm_inst,
+						clkdm->clkdm_offs);
 
 	} else {
 		BUG();
@@ -829,7 +837,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
 			_clkdm_add_autodeps(clkdm);
 	}
 
-	_omap2_clkdm_set_hwsup(clkdm, 1);
+	_enable_hwsup(clkdm);
 
 	pwrdm_clkdm_state_switch(clkdm);
 }
@@ -857,7 +865,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
 	pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
 		 clkdm->name);
 
-	_omap2_clkdm_set_hwsup(clkdm, 0);
+	_disable_hwsup(clkdm);
 
 	/*
 	 * XXX This should be removed once TI adds wakeup/sleep
@@ -891,7 +899,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
  */
 int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 {
-	int v;
+	bool hwsup = false;
 
 	/*
 	 * XXX Rewrite this code to maintain a list of enabled
@@ -909,17 +917,27 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name,
 		 clk->name);
 
-	if (!clkdm->clkstctrl_reg)
-		return 0;
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 
-	v = omap2_clkdm_clktrctrl_read(clkdm);
+		if (!clkdm->clktrctrl_mask)
+			return 0;
 
-	if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
-	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+		hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+						   clkdm->clktrctrl_mask);
+
+	} else if (cpu_is_omap44xx()) {
+
+		hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
+						       clkdm->cm_inst,
+						       clkdm->clkdm_offs);
+
+	}
+
+	if (hwsup) {
 		/* Disable HW transitions when we are changing deps */
-		_omap2_clkdm_set_hwsup(clkdm, 0);
+		_disable_hwsup(clkdm);
 		_clkdm_add_autodeps(clkdm);
-		_omap2_clkdm_set_hwsup(clkdm, 1);
+		_enable_hwsup(clkdm);
 	} else {
 		omap2_clkdm_wakeup(clkdm);
 	}
@@ -946,7 +964,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
  */
 int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 {
-	int v;
+	bool hwsup = false;
 
 	/*
 	 * XXX Rewrite this code to maintain a list of enabled
@@ -971,17 +989,27 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name,
 		 clk->name);
 
-	if (!clkdm->clkstctrl_reg)
-		return 0;
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 
-	v = omap2_clkdm_clktrctrl_read(clkdm);
+		if (!clkdm->clktrctrl_mask)
+			return 0;
+
+		hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
+						   clkdm->clktrctrl_mask);
+
+	} else if (cpu_is_omap44xx()) {
+
+		hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
+						       clkdm->cm_inst,
+						       clkdm->clkdm_offs);
+
+	}
 
-	if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
-	    (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+	if (hwsup) {
 		/* Disable HW transitions when we are changing deps */
-		_omap2_clkdm_set_hwsup(clkdm, 0);
+		_disable_hwsup(clkdm);
 		_clkdm_del_autodeps(clkdm);
-		_omap2_clkdm_set_hwsup(clkdm, 1);
+		_enable_hwsup(clkdm);
 	} else {
 		omap2_clkdm_sleep(clkdm);
 	}
diff --git a/arch/arm/plat-omap/include/plat/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h
index ba0a6c07c0f..de3faa20b46 100644
--- a/arch/arm/plat-omap/include/plat/clockdomain.h
+++ b/arch/arm/mach-omap2/clockdomain.h
@@ -4,19 +4,21 @@
  * OMAP2/3 clockdomain framework functions
  *
  * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Nokia Corporation
  *
- * Written by Paul Walmsley
+ * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
-#define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H
 
-#include <plat/powerdomain.h>
+#include <linux/init.h>
+
+#include "powerdomain.h"
 #include <plat/clock.h>
 #include <plat/cpu.h>
 
@@ -30,16 +32,6 @@
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
 #define CLKDM_CAN_HWSUP_SWSUP	(CLKDM_CAN_SWSUP | CLKDM_CAN_HWSUP)
 
-/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
-#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO		0x0
-#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO		0x1
-
-/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */
-#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO		0x0
-#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP		0x1
-#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP		0x2
-#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO		0x3
-
 /**
  * struct clkdm_autodep - clkdm deps to add when entering/exiting hwsup mode
  * @clkdm: clockdomain to add wkdep+sleepdep on - set name member only
@@ -90,11 +82,20 @@ struct clkdm_dep {
  * @clktrctrl_mask: CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg
  * @flags: Clockdomain capability flags
  * @dep_bit: Bit shift of this clockdomain's PM_WKDEP/CM_SLEEPDEP bit
+ * @prcm_partition: (OMAP4 only) PRCM partition ID for this clkdm's registers
+ * @cm_inst: (OMAP4 only) CM instance register offset
+ * @clkdm_offs: (OMAP4 only) CM clockdomain register offset
  * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up
  * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact
  * @omap_chip: OMAP chip types that this clockdomain is valid on
  * @usecount: Usecount tracking
  * @node: list_head to link all clockdomains together
+ *
+ * @prcm_partition should be a macro from mach-omap2/prcm44xx.h (OMAP4 only)
+ * @cm_inst should be a macro ending in _INST from the OMAP4 CM instance
+ *     definitions (OMAP4 only)
+ * @clkdm_offs should be a macro ending in _CDOFFS from the OMAP4 CM instance
+ *     definitions (OMAP4 only)
  */
 struct clockdomain {
 	const char *name;
@@ -102,10 +103,14 @@ struct clockdomain {
 		const char *name;
 		struct powerdomain *ptr;
 	} pwrdm;
-	void __iomem *clkstctrl_reg;
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	const u16 clktrctrl_mask;
+#endif
 	const u8 flags;
 	const u8 dep_bit;
+	const u8 prcm_partition;
+	const s16 cm_inst;
+	const u16 clkdm_offs;
 	struct clkdm_dep *wkdep_srcs;
 	struct clkdm_dep *sleepdep_srcs;
 	const struct omap_chip_id omap_chip;
@@ -138,4 +143,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm);
 int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk);
 int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk);
 
+extern void __init omap2_clockdomains_init(void);
+extern void __init omap44xx_clockdomains_init(void);
+
 #endif
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
index 8fc19ff2cd8..e4a7133ea3b 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c
@@ -4,7 +4,7 @@
  * Copyright (C) 2008-2009 Texas Instruments, Inc.
  * Copyright (C) 2008-2010 Nokia Corporation
  *
- * Written by Paul Walmsley and Jouni Högander
+ * Paul Walmsley, Jouni Högander
  *
  * This file contains clockdomains and clockdomain wakeup/sleep
  * dependencies for the OMAP2/3 chips.  Some notes:
@@ -32,12 +32,17 @@
  *    from the Power domain framework
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
+#include <linux/kernel.h>
+#include <linux/io.h>
 
-#include <plat/clockdomain.h>
-#include "cm.h"
-#include "prm.h"
+#include "clockdomain.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+#include "cm-regbits-44xx.h"
+#include "prm-regbits-24xx.h"
+#include "prm-regbits-34xx.h"
 
 /*
  * Clockdomain dependencies for wkdeps/sleepdeps
@@ -84,8 +89,6 @@ static struct clkdm_dep gfx_sgx_wkdeps[] = {
 
 /* 24XX-specific possible dependencies */
 
-#ifdef CONFIG_ARCH_OMAP2
-
 /* Wakeup dependency source arrays */
 
 /* 2420/2430 PM_WKDEP_DSP: CORE, MPU, WKUP */
@@ -165,8 +168,6 @@ static struct clkdm_dep core_24xx_wkdeps[] = {
 	{ NULL },
 };
 
-#endif
-
 
 /* 2430-specific possible wakeup dependencies */
 
@@ -425,8 +426,6 @@ static struct clkdm_dep gfx_sgx_sleepdeps[] = {
  * sys_clkout/sys_clkout2.
  */
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
 /* This is an implicit clockdomain - it is never defined as such in TRM */
 static struct clockdomain wkup_clkdm = {
 	.name		= "wkup_clkdm",
@@ -447,8 +446,6 @@ static struct clockdomain cm_clkdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
 };
 
-#endif
-
 /*
  * 2420-only clockdomains
  */
@@ -459,7 +456,6 @@ static struct clockdomain mpu_2420_clkdm = {
 	.name		= "mpu_clkdm",
 	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
-	.clkstctrl_reg  = OMAP2420_CM_REGADDR(MPU_MOD, OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= mpu_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -469,8 +465,6 @@ static struct clockdomain iva1_2420_clkdm = {
 	.name		= "iva1_clkdm",
 	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg  = OMAP2420_CM_REGADDR(OMAP24XX_DSP_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
 	.wkdep_srcs	= dsp_24xx_wkdeps,
 	.clktrctrl_mask = OMAP2420_AUTOSTATE_IVA_MASK,
@@ -481,8 +475,6 @@ static struct clockdomain dsp_2420_clkdm = {
 	.name		= "dsp_clkdm",
 	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg  = OMAP2420_CM_REGADDR(OMAP24XX_DSP_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
@@ -491,7 +483,6 @@ static struct clockdomain gfx_2420_clkdm = {
 	.name		= "gfx_clkdm",
 	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg  = OMAP2420_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= gfx_sgx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -501,7 +492,6 @@ static struct clockdomain core_l3_2420_clkdm = {
 	.name		= "core_l3_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
-	.clkstctrl_reg  = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= core_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -511,7 +501,6 @@ static struct clockdomain core_l4_2420_clkdm = {
 	.name		= "core_l4_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
-	.clkstctrl_reg  = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= core_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
@@ -521,7 +510,6 @@ static struct clockdomain dss_2420_clkdm = {
 	.name		= "dss_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
-	.clkstctrl_reg  = OMAP2420_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
@@ -539,8 +527,6 @@ static struct clockdomain mpu_2430_clkdm = {
 	.name		= "mpu_clkdm",
 	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg  = OMAP2430_CM_REGADDR(MPU_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= mpu_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_MPU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -551,8 +537,6 @@ static struct clockdomain mdm_clkdm = {
 	.name		= "mdm_clkdm",
 	.pwrdm		= { .name = "mdm_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg  = OMAP2430_CM_REGADDR(OMAP2430_MDM_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP2430_PM_WKDEP_MPU_EN_MDM_SHIFT,
 	.wkdep_srcs	= mdm_2430_wkdeps,
 	.clktrctrl_mask = OMAP2430_AUTOSTATE_MDM_MASK,
@@ -563,8 +547,6 @@ static struct clockdomain dsp_2430_clkdm = {
 	.name		= "dsp_clkdm",
 	.pwrdm		= { .name = "dsp_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg  = OMAP2430_CM_REGADDR(OMAP24XX_DSP_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP24XX_PM_WKDEP_MPU_EN_DSP_SHIFT,
 	.wkdep_srcs	= dsp_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSP_MASK,
@@ -575,7 +557,6 @@ static struct clockdomain gfx_2430_clkdm = {
 	.name		= "gfx_clkdm",
 	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg  = OMAP2430_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= gfx_sgx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_GFX_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
@@ -590,7 +571,6 @@ static struct clockdomain core_l3_2430_clkdm = {
 	.name		= "core_l3_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
-	.clkstctrl_reg  = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
 	.wkdep_srcs	= core_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L3_MASK,
@@ -606,7 +586,6 @@ static struct clockdomain core_l4_2430_clkdm = {
 	.name		= "core_l4_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
-	.clkstctrl_reg  = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP24XX_EN_CORE_SHIFT,
 	.wkdep_srcs	= core_24xx_wkdeps,
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_L4_MASK,
@@ -617,7 +596,6 @@ static struct clockdomain dss_2430_clkdm = {
 	.name		= "dss_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
-	.clkstctrl_reg  = OMAP2430_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP24XX_AUTOSTATE_DSS_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
@@ -635,7 +613,6 @@ static struct clockdomain mpu_3xxx_clkdm = {
 	.name		= "mpu_clkdm",
 	.pwrdm		= { .name = "mpu_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP | CLKDM_CAN_FORCE_WAKEUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(MPU_MOD, OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP3430_EN_MPU_SHIFT,
 	.wkdep_srcs	= mpu_3xxx_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_MPU_MASK,
@@ -646,8 +623,6 @@ static struct clockdomain neon_clkdm = {
 	.name		= "neon_clkdm",
 	.pwrdm		= { .name = "neon_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_NEON_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= neon_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_NEON_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -657,8 +632,6 @@ static struct clockdomain iva2_clkdm = {
 	.name		= "iva2_clkdm",
 	.pwrdm		= { .name = "iva2_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_IVA2_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_IVA2_SHIFT,
 	.wkdep_srcs	= iva2_wkdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_IVA2_MASK,
@@ -669,7 +642,6 @@ static struct clockdomain gfx_3430es1_clkdm = {
 	.name		= "gfx_clkdm",
 	.pwrdm		= { .name = "gfx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(GFX_MOD, OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= gfx_sgx_wkdeps,
 	.sleepdep_srcs	= gfx_sgx_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_GFX_MASK,
@@ -680,8 +652,6 @@ static struct clockdomain sgx_clkdm = {
 	.name		= "sgx_clkdm",
 	.pwrdm		= { .name = "sgx_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430ES2_SGX_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= gfx_sgx_wkdeps,
 	.sleepdep_srcs	= gfx_sgx_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_SGX_MASK,
@@ -699,7 +669,6 @@ static struct clockdomain d2d_clkdm = {
 	.name		= "d2d_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -713,7 +682,6 @@ static struct clockdomain core_l3_3xxx_clkdm = {
 	.name		= "core_l3_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L3_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -728,7 +696,6 @@ static struct clockdomain core_l4_3xxx_clkdm = {
 	.name		= "core_l4_clkdm",
 	.pwrdm		= { .name = "core_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(CORE_MOD, OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP3430_EN_CORE_SHIFT,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_L4_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
@@ -739,8 +706,6 @@ static struct clockdomain dss_3xxx_clkdm = {
 	.name		= "dss_clkdm",
 	.pwrdm		= { .name = "dss_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_DSS_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP3430_PM_WKDEP_MPU_EN_DSS_SHIFT,
 	.wkdep_srcs	= dss_wkdeps,
 	.sleepdep_srcs	= dss_sleepdeps,
@@ -752,8 +717,6 @@ static struct clockdomain cam_clkdm = {
 	.name		= "cam_clkdm",
 	.pwrdm		= { .name = "cam_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_CAM_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= cam_wkdeps,
 	.sleepdep_srcs	= cam_sleepdeps,
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_CAM_MASK,
@@ -764,8 +727,6 @@ static struct clockdomain usbhost_clkdm = {
 	.name		= "usbhost_clkdm",
 	.pwrdm		= { .name = "usbhost_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430ES2_USBHOST_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.wkdep_srcs	= usbhost_wkdeps,
 	.sleepdep_srcs	= usbhost_sleepdeps,
 	.clktrctrl_mask = OMAP3430ES2_CLKTRCTRL_USBHOST_MASK,
@@ -776,8 +737,6 @@ static struct clockdomain per_clkdm = {
 	.name		= "per_clkdm",
 	.pwrdm		= { .name = "per_pwrdm" },
 	.flags		= CLKDM_CAN_HWSUP_SWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_PER_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.dep_bit	= OMAP3430_EN_PER_SHIFT,
 	.wkdep_srcs	= per_wkdeps,
 	.sleepdep_srcs	= per_sleepdeps,
@@ -793,8 +752,6 @@ static struct clockdomain emu_clkdm = {
 	.name		= "emu_clkdm",
 	.pwrdm		= { .name = "emu_pwrdm" },
 	.flags		= /* CLKDM_CAN_ENABLE_AUTO |  */CLKDM_CAN_SWSUP,
-	.clkstctrl_reg	= OMAP34XX_CM_REGADDR(OMAP3430_EMU_MOD,
-						 OMAP2_CM_CLKSTCTRL),
 	.clktrctrl_mask = OMAP3430_CLKTRCTRL_EMU_MASK,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
 };
@@ -831,8 +788,6 @@ static struct clockdomain dpll5_clkdm = {
 
 #endif   /* CONFIG_ARCH_OMAP3 */
 
-#include "clockdomains44xx.h"
-
 /*
  * Clockdomain hwsup dependencies (OMAP3 only)
  */
@@ -851,17 +806,10 @@ static struct clkdm_autodep clkdm_autodeps[] = {
 	}
 };
 
-/*
- * List of clockdomain pointers per platform
- */
-
-static struct clockdomain *clockdomains_omap[] = {
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+static struct clockdomain *clockdomains_omap2[] __initdata = {
 	&wkup_clkdm,
 	&cm_clkdm,
 	&prm_clkdm,
-#endif
 
 #ifdef CONFIG_ARCH_OMAP2420
 	&mpu_2420_clkdm,
@@ -903,35 +851,10 @@ static struct clockdomain *clockdomains_omap[] = {
 	&dpll4_clkdm,
 	&dpll5_clkdm,
 #endif
-
-#ifdef CONFIG_ARCH_OMAP4
-	&l4_cefuse_44xx_clkdm,
-	&l4_cfg_44xx_clkdm,
-	&tesla_44xx_clkdm,
-	&l3_gfx_44xx_clkdm,
-	&ivahd_44xx_clkdm,
-	&l4_secure_44xx_clkdm,
-	&l4_per_44xx_clkdm,
-	&abe_44xx_clkdm,
-	&l3_instr_44xx_clkdm,
-	&l3_init_44xx_clkdm,
-	&mpuss_44xx_clkdm,
-	&mpu0_44xx_clkdm,
-	&mpu1_44xx_clkdm,
-	&l3_emif_44xx_clkdm,
-	&l4_ao_44xx_clkdm,
-	&ducati_44xx_clkdm,
-	&l3_2_44xx_clkdm,
-	&l3_1_44xx_clkdm,
-	&l3_d2d_44xx_clkdm,
-	&iss_44xx_clkdm,
-	&l3_dss_44xx_clkdm,
-	&l4_wkup_44xx_clkdm,
-	&emu_sys_44xx_clkdm,
-	&l3_dma_44xx_clkdm,
-#endif
-
 	NULL,
 };
 
-#endif
+void __init omap2_clockdomains_init(void)
+{
+	clkdm_init(clockdomains_omap2, clkdm_autodeps);
+}
diff --git a/arch/arm/mach-omap2/clockdomains44xx.h b/arch/arm/mach-omap2/clockdomains44xx_data.c
index 7e5ba0f6792..51920fc7fc5 100644
--- a/arch/arm/mach-omap2/clockdomains44xx.h
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -23,18 +23,27 @@
  * -> Populate the Sleep/Wakeup dependencies for the domains
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS44XX_H
+#include <linux/kernel.h>
+#include <linux/io.h>
 
-#include <plat/clockdomain.h>
+#include "clockdomain.h"
+#include "cm1_44xx.h"
+#include "cm2_44xx.h"
+
+#include "cm1_44xx.h"
+#include "cm2_44xx.h"
+#include "cm-regbits-44xx.h"
+#include "prm44xx.h"
+#include "prcm44xx.h"
+#include "prcm_mpu44xx.h"
 
-#if defined(CONFIG_ARCH_OMAP4)
 
 static struct clockdomain l4_cefuse_44xx_clkdm = {
 	.name		  = "l4_cefuse_clkdm",
 	.pwrdm		  = { .name = "cefuse_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_CEFUSE_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CEFUSE_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -42,8 +51,9 @@ static struct clockdomain l4_cefuse_44xx_clkdm = {
 static struct clockdomain l4_cfg_44xx_clkdm = {
 	.name		  = "l4_cfg_clkdm",
 	.pwrdm		  = { .name = "core_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_L4CFG_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CORE_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CORE_L4CFG_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -51,8 +61,9 @@ static struct clockdomain l4_cfg_44xx_clkdm = {
 static struct clockdomain tesla_44xx_clkdm = {
 	.name		  = "tesla_clkdm",
 	.pwrdm		  = { .name = "tesla_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_TESLA_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM1_PARTITION,
+	.cm_inst	  = OMAP4430_CM1_TESLA_INST,
+	.clkdm_offs	  = OMAP4430_CM1_TESLA_TESLA_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -60,8 +71,9 @@ static struct clockdomain tesla_44xx_clkdm = {
 static struct clockdomain l3_gfx_44xx_clkdm = {
 	.name		  = "l3_gfx_clkdm",
 	.pwrdm		  = { .name = "gfx_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_GFX_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_GFX_INST,
+	.clkdm_offs	  = OMAP4430_CM2_GFX_GFX_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -69,8 +81,9 @@ static struct clockdomain l3_gfx_44xx_clkdm = {
 static struct clockdomain ivahd_44xx_clkdm = {
 	.name		  = "ivahd_clkdm",
 	.pwrdm		  = { .name = "ivahd_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_IVAHD_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_IVAHD_INST,
+	.clkdm_offs	  = OMAP4430_CM2_IVAHD_IVAHD_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -78,8 +91,9 @@ static struct clockdomain ivahd_44xx_clkdm = {
 static struct clockdomain l4_secure_44xx_clkdm = {
 	.name		  = "l4_secure_clkdm",
 	.pwrdm		  = { .name = "l4per_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_L4SEC_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_L4PER_INST,
+	.clkdm_offs	  = OMAP4430_CM2_L4PER_L4SEC_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -87,8 +101,9 @@ static struct clockdomain l4_secure_44xx_clkdm = {
 static struct clockdomain l4_per_44xx_clkdm = {
 	.name		  = "l4_per_clkdm",
 	.pwrdm		  = { .name = "l4per_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_L4PER_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_L4PER_INST,
+	.clkdm_offs	  = OMAP4430_CM2_L4PER_L4PER_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -96,8 +111,9 @@ static struct clockdomain l4_per_44xx_clkdm = {
 static struct clockdomain abe_44xx_clkdm = {
 	.name		  = "abe_clkdm",
 	.pwrdm		  = { .name = "abe_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM1_ABE_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM1_PARTITION,
+	.cm_inst	  = OMAP4430_CM1_ABE_INST,
+	.clkdm_offs	  = OMAP4430_CM1_ABE_ABE_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -105,16 +121,18 @@ static struct clockdomain abe_44xx_clkdm = {
 static struct clockdomain l3_instr_44xx_clkdm = {
 	.name		  = "l3_instr_clkdm",
 	.pwrdm		  = { .name = "core_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_L3INSTR_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CORE_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CORE_L3INSTR_CDOFFS,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
 static struct clockdomain l3_init_44xx_clkdm = {
 	.name		  = "l3_init_clkdm",
 	.pwrdm		  = { .name = "l3init_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_L3INIT_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_L3INIT_INST,
+	.clkdm_offs	  = OMAP4430_CM2_L3INIT_L3INIT_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -122,8 +140,9 @@ static struct clockdomain l3_init_44xx_clkdm = {
 static struct clockdomain mpuss_44xx_clkdm = {
 	.name		  = "mpuss_clkdm",
 	.pwrdm		  = { .name = "mpu_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_MPU_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM1_PARTITION,
+	.cm_inst	  = OMAP4430_CM1_MPU_INST,
+	.clkdm_offs	  = OMAP4430_CM1_MPU_MPU_CDOFFS,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -131,8 +150,9 @@ static struct clockdomain mpuss_44xx_clkdm = {
 static struct clockdomain mpu0_44xx_clkdm = {
 	.name		  = "mpu0_clkdm",
 	.pwrdm		  = { .name = "cpu0_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_CPU0_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_PRCM_MPU_PARTITION,
+	.cm_inst	  = OMAP4430_PRCM_MPU_CPU0_INST,
+	.clkdm_offs	  = OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -140,8 +160,9 @@ static struct clockdomain mpu0_44xx_clkdm = {
 static struct clockdomain mpu1_44xx_clkdm = {
 	.name		  = "mpu1_clkdm",
 	.pwrdm		  = { .name = "cpu1_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_CPU1_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_PRCM_MPU_PARTITION,
+	.cm_inst	  = OMAP4430_PRCM_MPU_CPU1_INST,
+	.clkdm_offs	  = OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -149,8 +170,9 @@ static struct clockdomain mpu1_44xx_clkdm = {
 static struct clockdomain l3_emif_44xx_clkdm = {
 	.name		  = "l3_emif_clkdm",
 	.pwrdm		  = { .name = "core_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_MEMIF_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CORE_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CORE_MEMIF_CDOFFS,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -158,8 +180,9 @@ static struct clockdomain l3_emif_44xx_clkdm = {
 static struct clockdomain l4_ao_44xx_clkdm = {
 	.name		  = "l4_ao_clkdm",
 	.pwrdm		  = { .name = "always_on_core_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_ALWON_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_ALWAYS_ON_INST,
+	.clkdm_offs	  = OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -167,8 +190,9 @@ static struct clockdomain l4_ao_44xx_clkdm = {
 static struct clockdomain ducati_44xx_clkdm = {
 	.name		  = "ducati_clkdm",
 	.pwrdm		  = { .name = "core_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_DUCATI_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CORE_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CORE_DUCATI_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -176,8 +200,9 @@ static struct clockdomain ducati_44xx_clkdm = {
 static struct clockdomain l3_2_44xx_clkdm = {
 	.name		  = "l3_2_clkdm",
 	.pwrdm		  = { .name = "core_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_L3_2_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CORE_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CORE_L3_2_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -185,8 +210,9 @@ static struct clockdomain l3_2_44xx_clkdm = {
 static struct clockdomain l3_1_44xx_clkdm = {
 	.name		  = "l3_1_clkdm",
 	.pwrdm		  = { .name = "core_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_L3_1_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CORE_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CORE_L3_1_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -194,8 +220,9 @@ static struct clockdomain l3_1_44xx_clkdm = {
 static struct clockdomain l3_d2d_44xx_clkdm = {
 	.name		  = "l3_d2d_clkdm",
 	.pwrdm		  = { .name = "core_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_D2D_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CORE_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CORE_D2D_CDOFFS,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -203,8 +230,9 @@ static struct clockdomain l3_d2d_44xx_clkdm = {
 static struct clockdomain iss_44xx_clkdm = {
 	.name		  = "iss_clkdm",
 	.pwrdm		  = { .name = "cam_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_CAM_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CAM_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CAM_CAM_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -212,8 +240,9 @@ static struct clockdomain iss_44xx_clkdm = {
 static struct clockdomain l3_dss_44xx_clkdm = {
 	.name		  = "l3_dss_clkdm",
 	.pwrdm		  = { .name = "dss_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_DSS_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_DSS_INST,
+	.clkdm_offs	  = OMAP4430_CM2_DSS_DSS_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -221,8 +250,9 @@ static struct clockdomain l3_dss_44xx_clkdm = {
 static struct clockdomain l4_wkup_44xx_clkdm = {
 	.name		  = "l4_wkup_clkdm",
 	.pwrdm		  = { .name = "wkup_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_WKUP_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
+	.cm_inst	  = OMAP4430_PRM_WKUP_CM_INST,
+	.clkdm_offs	  = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -230,8 +260,9 @@ static struct clockdomain l4_wkup_44xx_clkdm = {
 static struct clockdomain emu_sys_44xx_clkdm = {
 	.name		  = "emu_sys_clkdm",
 	.pwrdm		  = { .name = "emu_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_EMU_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
+	.cm_inst	  = OMAP4430_PRM_EMU_CM_INST,
+	.clkdm_offs	  = OMAP4430_PRM_EMU_CM_EMU_CDOFFS,
 	.flags		  = CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
@@ -239,12 +270,42 @@ static struct clockdomain emu_sys_44xx_clkdm = {
 static struct clockdomain l3_dma_44xx_clkdm = {
 	.name		  = "l3_dma_clkdm",
 	.pwrdm		  = { .name = "core_pwrdm" },
-	.clkstctrl_reg	  = OMAP4430_CM_SDMA_CLKSTCTRL,
-	.clktrctrl_mask	  = OMAP4430_CLKTRCTRL_MASK,
+	.prcm_partition	  = OMAP4430_CM2_PARTITION,
+	.cm_inst	  = OMAP4430_CM2_CORE_INST,
+	.clkdm_offs	  = OMAP4430_CM2_CORE_SDMA_CDOFFS,
 	.flags		  = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
-#endif
+static struct clockdomain *clockdomains_omap44xx[] __initdata = {
+	&l4_cefuse_44xx_clkdm,
+	&l4_cfg_44xx_clkdm,
+	&tesla_44xx_clkdm,
+	&l3_gfx_44xx_clkdm,
+	&ivahd_44xx_clkdm,
+	&l4_secure_44xx_clkdm,
+	&l4_per_44xx_clkdm,
+	&abe_44xx_clkdm,
+	&l3_instr_44xx_clkdm,
+	&l3_init_44xx_clkdm,
+	&mpuss_44xx_clkdm,
+	&mpu0_44xx_clkdm,
+	&mpu1_44xx_clkdm,
+	&l3_emif_44xx_clkdm,
+	&l4_ao_44xx_clkdm,
+	&ducati_44xx_clkdm,
+	&l3_2_44xx_clkdm,
+	&l3_1_44xx_clkdm,
+	&l3_d2d_44xx_clkdm,
+	&iss_44xx_clkdm,
+	&l3_dss_44xx_clkdm,
+	&l4_wkup_44xx_clkdm,
+	&emu_sys_44xx_clkdm,
+	&l3_dma_44xx_clkdm,
+	NULL,
+};
 
-#endif
+void __init omap44xx_clockdomains_init(void)
+{
+	clkdm_init(clockdomains_omap44xx, NULL);
+}
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
index da51cc3ed7e..d70660e82fe 100644
--- a/arch/arm/mach-omap2/cm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -14,8 +14,6 @@
  * published by the Free Software Foundation.
  */
 
-#include "cm.h"
-
 /* Bits shared between registers */
 
 /* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
@@ -126,8 +124,12 @@
 #define OMAP24XX_ST_HDQ_MASK				(1 << 23)
 #define OMAP2420_ST_I2C2_SHIFT				20
 #define OMAP2420_ST_I2C2_MASK				(1 << 20)
+#define OMAP2430_ST_I2CHS1_SHIFT			19
+#define OMAP2430_ST_I2CHS1_MASK				(1 << 19)
 #define OMAP2420_ST_I2C1_SHIFT				19
 #define OMAP2420_ST_I2C1_MASK				(1 << 19)
+#define OMAP2430_ST_I2CHS2_SHIFT			20
+#define OMAP2430_ST_I2CHS2_MASK				(1 << 20)
 #define OMAP24XX_ST_MCBSP2_SHIFT			16
 #define OMAP24XX_ST_MCBSP2_MASK				(1 << 16)
 #define OMAP24XX_ST_MCBSP1_SHIFT			15
@@ -432,4 +434,9 @@
 #define OMAP2430_AUTOSTATE_MDM_SHIFT			0
 #define OMAP2430_AUTOSTATE_MDM_MASK			(1 << 0)
 
+/* OMAP24XX CM_CLKSTCTRL_*.AUTOSTATE_* register bit values */
+#define OMAP24XX_CLKSTCTRL_DISABLE_AUTO		0x0
+#define OMAP24XX_CLKSTCTRL_ENABLE_AUTO		0x1
+
+
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 4f959a7d881..b91275908f3 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -14,8 +14,6 @@
  * published by the Free Software Foundation.
  */
 
-#include "cm.h"
-
 /* Bits shared between registers */
 
 /* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
@@ -800,4 +798,15 @@
 #define OMAP3430ES2_CLKACTIVITY_USBHOST_SHIFT		0
 #define OMAP3430ES2_CLKACTIVITY_USBHOST_MASK		(1 << 0)
 
+/*
+ *
+ */
+
+/* OMAP3XXX CM_CLKSTCTRL_*.CLKTRCTRL_* register bit values */
+#define OMAP34XX_CLKSTCTRL_DISABLE_AUTO		0x0
+#define OMAP34XX_CLKSTCTRL_FORCE_SLEEP		0x1
+#define OMAP34XX_CLKSTCTRL_FORCE_WAKEUP		0x2
+#define OMAP34XX_CLKSTCTRL_ENABLE_AUTO		0x3
+
+
 #endif
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
index 0b72be43377..9d47a05b17b 100644
--- a/arch/arm/mach-omap2/cm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -22,9 +22,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
 #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
 
-#include "cm.h"
-
-
 /*
  * Used by CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP,
  * CM_TESLA_DYNAMICDEP
diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c
deleted file mode 100644
index 721c3b66740..00000000000
--- a/arch/arm/mach-omap2/cm.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * OMAP2/3 CM module functions
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/atomic.h>
-
-#include <plat/common.h>
-
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-#include "cm-regbits-34xx.h"
-
-static const u8 cm_idlest_offs[] = {
-	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
-};
-
-/**
- * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
- * @prcm_mod: PRCM module offset
- * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
- * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
- *
- * XXX document
- */
-int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
-{
-	int ena = 0, i = 0;
-	u8 cm_idlest_reg;
-	u32 mask;
-
-	if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
-		return -EINVAL;
-
-	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
-
-	mask = 1 << idlest_shift;
-
-	if (cpu_is_omap24xx())
-		ena = mask;
-	else if (cpu_is_omap34xx())
-		ena = 0;
-	else
-		BUG();
-
-	/* XXX should be OMAP2 CM */
-	omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
-			  MAX_MODULE_READY_TIME, i);
-
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
-}
-
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index a02ca30423d..a7bc096bd40 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -1,8 +1,5 @@
-#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
-#define __ARCH_ASM_MACH_OMAP2_CM_H
-
 /*
- * OMAP2/3 Clock Management (CM) register definitions
+ * OMAP2+ Clock Management prototypes
  *
  * Copyright (C) 2007-2009 Texas Instruments, Inc.
  * Copyright (C) 2007-2009 Nokia Corporation
@@ -13,136 +10,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
-#include "prcm-common.h"
-
-#define OMAP2420_CM_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
-#define OMAP2430_CM_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
-#define OMAP34XX_CM_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-#define OMAP44XX_CM1_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + (module) + (reg))
-#define OMAP44XX_CM2_REGADDR(module, reg)				\
-			OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + (module) + (reg))
-
-#include "cm44xx.h"
-
-/*
- * Architecture-specific global CM registers
- * Use cm_{read,write}_reg() with these registers.
- * These registers appear once per CM module.
- */
-
-#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
-
-#define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
-#define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
-/*
- * Module specific CM registers from CM_BASE + domain offset
- * Use cm_{read,write}_mod_reg() with these registers.
- * These register offsets generally appear in more than one PRCM submodule.
- */
-
-/* Common between 24xx and 34xx */
-
-#define CM_FCLKEN					0x0000
-#define CM_FCLKEN1					CM_FCLKEN
-#define CM_CLKEN					CM_FCLKEN
-#define CM_ICLKEN					0x0010
-#define CM_ICLKEN1					CM_ICLKEN
-#define CM_ICLKEN2					0x0014
-#define CM_ICLKEN3					0x0018
-#define CM_IDLEST					0x0020
-#define CM_IDLEST1					CM_IDLEST
-#define CM_IDLEST2					0x0024
-#define CM_AUTOIDLE					0x0030
-#define CM_AUTOIDLE1					CM_AUTOIDLE
-#define CM_AUTOIDLE2					0x0034
-#define CM_AUTOIDLE3					0x0038
-#define CM_CLKSEL					0x0040
-#define CM_CLKSEL1					CM_CLKSEL
-#define CM_CLKSEL2					0x0044
-#define OMAP2_CM_CLKSTCTRL				0x0048
-#define OMAP4_CM_CLKSTCTRL				0x0000
-
-
-/* Architecture-specific registers */
-
-#define OMAP24XX_CM_FCLKEN2				0x0004
-#define OMAP24XX_CM_ICLKEN4				0x001c
-#define OMAP24XX_CM_AUTOIDLE4				0x003c
-
-#define OMAP2430_CM_IDLEST3				0x0028
-
-#define OMAP3430_CM_CLKEN_PLL				0x0004
-#define OMAP3430ES2_CM_CLKEN2				0x0004
-#define OMAP3430ES2_CM_FCLKEN3				0x0008
-#define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
-#define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
-#define OMAP3430ES2_CM_AUTOIDLE2_PLL			CM_AUTOIDLE2
-#define OMAP3430_CM_CLKSEL1				CM_CLKSEL
-#define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
-#define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
-#define OMAP3430_CM_SLEEPDEP				CM_CLKSEL2
-#define OMAP3430_CM_CLKSEL3				OMAP2_CM_CLKSTCTRL
-#define OMAP3430_CM_CLKSTST				0x004c
-#define OMAP3430ES2_CM_CLKSEL4				0x004c
-#define OMAP3430ES2_CM_CLKSEL5				0x0050
-#define OMAP3430_CM_CLKSEL2_EMU				0x0050
-#define OMAP3430_CM_CLKSEL3_EMU				0x0054
-
-/* CM2.CEFUSE_CM2 register offsets */
-
-/* OMAP4 modulemode control */
-#define OMAP4430_MODULEMODE_HWCTRL			0
-#define OMAP4430_MODULEMODE_SWCTRL			1
-
-/* Clock management domain register get/set */
-
-#ifndef __ASSEMBLER__
-
-extern u32 cm_read_mod_reg(s16 module, u16 idx);
-extern void cm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-
-extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
-				      u8 idlest_shift);
-extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
-
-static inline u32 cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return cm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-static inline u32 cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
-#endif
-
-/* CM register bits shared between 24XX and 3430 */
-
-/* CM_CLKSEL_GFX */
-#define OMAP_CLKSEL_GFX_SHIFT				0
-#define OMAP_CLKSEL_GFX_MASK				(0x7 << 0)
-
-/* CM_ICLKEN_GFX */
-#define OMAP_EN_GFX_SHIFT				0
-#define OMAP_EN_GFX_MASK				(1 << 0)
-
-/* CM_IDLEST_GFX */
-#define OMAP_ST_GFX_MASK				(1 << 0)
-
-
-/* CM_IDLEST indicator */
-#define OMAP24XX_CM_IDLEST_VAL		0
-#define OMAP34XX_CM_IDLEST_VAL		1
+#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
+#define __ARCH_ASM_MACH_OMAP2_CM_H
 
 /*
  * MAX_MODULE_READY_TIME: max duration in microseconds to wait for the
diff --git a/arch/arm/mach-omap2/cm1_44xx.h b/arch/arm/mach-omap2/cm1_44xx.h
new file mode 100644
index 00000000000..e2d7a56b2ad
--- /dev/null
+++ b/arch/arm/mach-omap2/cm1_44xx.h
@@ -0,0 +1,261 @@
+/*
+ * OMAP44xx CM1 instance offset macros
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX",
+ *     or "OMAP4430".
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM1_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM1_44XX_H
+
+/* CM1 base address */
+#define OMAP4430_CM1_BASE		0x4a004000
+
+#define OMAP44XX_CM1_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + (inst) + (reg))
+
+/* CM1 instances */
+#define OMAP4430_CM1_OCP_SOCKET_INST	0x0000
+#define OMAP4430_CM1_CKGEN_INST		0x0100
+#define OMAP4430_CM1_MPU_INST		0x0300
+#define OMAP4430_CM1_TESLA_INST		0x0400
+#define OMAP4430_CM1_ABE_INST		0x0500
+#define OMAP4430_CM1_RESTORE_INST	0x0e00
+#define OMAP4430_CM1_INSTR_INST		0x0f00
+
+/* CM1 clockdomain register offsets (from instance start) */
+#define OMAP4430_CM1_ABE_ABE_CDOFFS		0x0000
+#define OMAP4430_CM1_MPU_MPU_CDOFFS		0x0000
+#define OMAP4430_CM1_TESLA_TESLA_CDOFFS		0x0000
+
+/* CM1 */
+
+/* CM1.OCP_SOCKET_CM1 register offsets */
+#define OMAP4_REVISION_CM1_OFFSET			0x0000
+#define OMAP4430_REVISION_CM1				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_INST, 0x0000)
+#define OMAP4_CM_CM1_PROFILING_CLKCTRL_OFFSET		0x0040
+#define OMAP4430_CM_CM1_PROFILING_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_INST, 0x0040)
+
+/* CM1.CKGEN_CM1 register offsets */
+#define OMAP4_CM_CLKSEL_CORE_OFFSET			0x0000
+#define OMAP4430_CM_CLKSEL_CORE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0000)
+#define OMAP4_CM_CLKSEL_ABE_OFFSET			0x0008
+#define OMAP4430_CM_CLKSEL_ABE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0008)
+#define OMAP4_CM_DLL_CTRL_OFFSET			0x0010
+#define OMAP4430_CM_DLL_CTRL				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0010)
+#define OMAP4_CM_CLKMODE_DPLL_CORE_OFFSET		0x0020
+#define OMAP4430_CM_CLKMODE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0020)
+#define OMAP4_CM_IDLEST_DPLL_CORE_OFFSET		0x0024
+#define OMAP4430_CM_IDLEST_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0024)
+#define OMAP4_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0028
+#define OMAP4430_CM_AUTOIDLE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0028)
+#define OMAP4_CM_CLKSEL_DPLL_CORE_OFFSET		0x002c
+#define OMAP4430_CM_CLKSEL_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x002c)
+#define OMAP4_CM_DIV_M2_DPLL_CORE_OFFSET		0x0030
+#define OMAP4430_CM_DIV_M2_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0030)
+#define OMAP4_CM_DIV_M3_DPLL_CORE_OFFSET		0x0034
+#define OMAP4430_CM_DIV_M3_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0034)
+#define OMAP4_CM_DIV_M4_DPLL_CORE_OFFSET		0x0038
+#define OMAP4430_CM_DIV_M4_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0038)
+#define OMAP4_CM_DIV_M5_DPLL_CORE_OFFSET		0x003c
+#define OMAP4430_CM_DIV_M5_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x003c)
+#define OMAP4_CM_DIV_M6_DPLL_CORE_OFFSET		0x0040
+#define OMAP4430_CM_DIV_M6_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0040)
+#define OMAP4_CM_DIV_M7_DPLL_CORE_OFFSET		0x0044
+#define OMAP4430_CM_DIV_M7_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0044)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0048)
+#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_CORE_OFFSET	0x004c
+#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c)
+#define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET		0x0050
+#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0050)
+#define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
+#define OMAP4430_CM_CLKMODE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0060)
+#define OMAP4_CM_IDLEST_DPLL_MPU_OFFSET			0x0064
+#define OMAP4430_CM_IDLEST_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0064)
+#define OMAP4_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x0068
+#define OMAP4430_CM_AUTOIDLE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0068)
+#define OMAP4_CM_CLKSEL_DPLL_MPU_OFFSET			0x006c
+#define OMAP4430_CM_CLKSEL_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x006c)
+#define OMAP4_CM_DIV_M2_DPLL_MPU_OFFSET			0x0070
+#define OMAP4430_CM_DIV_M2_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0070)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET		0x0088
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0088)
+#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_MPU_OFFSET		0x008c
+#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c)
+#define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET			0x009c
+#define OMAP4430_CM_BYPCLK_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x009c)
+#define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
+#define OMAP4430_CM_CLKMODE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00a0)
+#define OMAP4_CM_IDLEST_DPLL_IVA_OFFSET			0x00a4
+#define OMAP4430_CM_IDLEST_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00a4)
+#define OMAP4_CM_AUTOIDLE_DPLL_IVA_OFFSET		0x00a8
+#define OMAP4430_CM_AUTOIDLE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00a8)
+#define OMAP4_CM_CLKSEL_DPLL_IVA_OFFSET			0x00ac
+#define OMAP4430_CM_CLKSEL_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00ac)
+#define OMAP4_CM_DIV_M4_DPLL_IVA_OFFSET			0x00b8
+#define OMAP4430_CM_DIV_M4_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00b8)
+#define OMAP4_CM_DIV_M5_DPLL_IVA_OFFSET			0x00bc
+#define OMAP4430_CM_DIV_M5_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00bc)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET		0x00c8
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00c8)
+#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_IVA_OFFSET		0x00cc
+#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc)
+#define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET			0x00dc
+#define OMAP4430_CM_BYPCLK_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00dc)
+#define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
+#define OMAP4430_CM_CLKMODE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00e0)
+#define OMAP4_CM_IDLEST_DPLL_ABE_OFFSET			0x00e4
+#define OMAP4430_CM_IDLEST_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00e4)
+#define OMAP4_CM_AUTOIDLE_DPLL_ABE_OFFSET		0x00e8
+#define OMAP4430_CM_AUTOIDLE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00e8)
+#define OMAP4_CM_CLKSEL_DPLL_ABE_OFFSET			0x00ec
+#define OMAP4430_CM_CLKSEL_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00ec)
+#define OMAP4_CM_DIV_M2_DPLL_ABE_OFFSET			0x00f0
+#define OMAP4430_CM_DIV_M2_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00f0)
+#define OMAP4_CM_DIV_M3_DPLL_ABE_OFFSET			0x00f4
+#define OMAP4430_CM_DIV_M3_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00f4)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET		0x0108
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0108)
+#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_ABE_OFFSET		0x010c
+#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c)
+#define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET		0x0120
+#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0120)
+#define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET		0x0124
+#define OMAP4430_CM_IDLEST_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0124)
+#define OMAP4_CM_AUTOIDLE_DPLL_DDRPHY_OFFSET		0x0128
+#define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0128)
+#define OMAP4_CM_CLKSEL_DPLL_DDRPHY_OFFSET		0x012c
+#define OMAP4430_CM_CLKSEL_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x012c)
+#define OMAP4_CM_DIV_M2_DPLL_DDRPHY_OFFSET		0x0130
+#define OMAP4430_CM_DIV_M2_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0130)
+#define OMAP4_CM_DIV_M4_DPLL_DDRPHY_OFFSET		0x0138
+#define OMAP4430_CM_DIV_M4_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0138)
+#define OMAP4_CM_DIV_M5_DPLL_DDRPHY_OFFSET		0x013c
+#define OMAP4430_CM_DIV_M5_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x013c)
+#define OMAP4_CM_DIV_M6_DPLL_DDRPHY_OFFSET		0x0140
+#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0140)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET	0x0148
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0148)
+#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_DDRPHY_OFFSET	0x014c
+#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG1			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0160)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG2			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0164)
+#define OMAP4_CM_DYN_DEP_PRESCAL_OFFSET			0x0170
+#define OMAP4430_CM_DYN_DEP_PRESCAL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0170)
+#define OMAP4_CM_RESTORE_ST_OFFSET			0x0180
+#define OMAP4430_CM_RESTORE_ST				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0180)
+
+/* CM1.MPU_CM1 register offsets */
+#define OMAP4_CM_MPU_CLKSTCTRL_OFFSET			0x0000
+#define OMAP4430_CM_MPU_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0000)
+#define OMAP4_CM_MPU_STATICDEP_OFFSET			0x0004
+#define OMAP4430_CM_MPU_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0004)
+#define OMAP4_CM_MPU_DYNAMICDEP_OFFSET			0x0008
+#define OMAP4430_CM_MPU_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0008)
+#define OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET			0x0020
+#define OMAP4430_CM_MPU_MPU_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_INST, 0x0020)
+
+/* CM1.TESLA_CM1 register offsets */
+#define OMAP4_CM_TESLA_CLKSTCTRL_OFFSET			0x0000
+#define OMAP4430_CM_TESLA_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0000)
+#define OMAP4_CM_TESLA_STATICDEP_OFFSET			0x0004
+#define OMAP4430_CM_TESLA_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0004)
+#define OMAP4_CM_TESLA_DYNAMICDEP_OFFSET		0x0008
+#define OMAP4430_CM_TESLA_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0008)
+#define OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET		0x0020
+#define OMAP4430_CM_TESLA_TESLA_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_INST, 0x0020)
+
+/* CM1.ABE_CM1 register offsets */
+#define OMAP4_CM1_ABE_CLKSTCTRL_OFFSET			0x0000
+#define OMAP4430_CM1_ABE_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0000)
+#define OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET		0x0020
+#define OMAP4430_CM1_ABE_L4ABE_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0020)
+#define OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET		0x0028
+#define OMAP4430_CM1_ABE_AESS_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0028)
+#define OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET		0x0030
+#define OMAP4430_CM1_ABE_PDM_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0030)
+#define OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET		0x0038
+#define OMAP4430_CM1_ABE_DMIC_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0038)
+#define OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET		0x0040
+#define OMAP4430_CM1_ABE_MCASP_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0040)
+#define OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET		0x0048
+#define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0048)
+#define OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET		0x0050
+#define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0050)
+#define OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET		0x0058
+#define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0058)
+#define OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET		0x0060
+#define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0060)
+#define OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET		0x0068
+#define OMAP4430_CM1_ABE_TIMER5_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0068)
+#define OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET		0x0070
+#define OMAP4430_CM1_ABE_TIMER6_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0070)
+#define OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET		0x0078
+#define OMAP4430_CM1_ABE_TIMER7_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0078)
+#define OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET		0x0080
+#define OMAP4430_CM1_ABE_TIMER8_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0080)
+#define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET		0x0088
+#define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0088)
+
+/* CM1.RESTORE_CM1 register offsets */
+#define OMAP4_CM_CLKSEL_CORE_RESTORE_OFFSET		0x0000
+#define OMAP4430_CM_CLKSEL_CORE_RESTORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0000)
+#define OMAP4_CM_DIV_M2_DPLL_CORE_RESTORE_OFFSET	0x0004
+#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0004)
+#define OMAP4_CM_DIV_M3_DPLL_CORE_RESTORE_OFFSET	0x0008
+#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0008)
+#define OMAP4_CM_DIV_M4_DPLL_CORE_RESTORE_OFFSET	0x000c
+#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x000c)
+#define OMAP4_CM_DIV_M5_DPLL_CORE_RESTORE_OFFSET	0x0010
+#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0010)
+#define OMAP4_CM_DIV_M6_DPLL_CORE_RESTORE_OFFSET	0x0014
+#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0014)
+#define OMAP4_CM_DIV_M7_DPLL_CORE_RESTORE_OFFSET	0x0018
+#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0018)
+#define OMAP4_CM_CLKSEL_DPLL_CORE_RESTORE_OFFSET	0x001c
+#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x001c)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE_OFFSET	0x0020
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0020)
+#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_CORE_RESTORE_OFFSET	0x0024
+#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0024)
+#define OMAP4_CM_CLKMODE_DPLL_CORE_RESTORE_OFFSET	0x0028
+#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0028)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG2_RESTORE_OFFSET	0x002c
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG2_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x002c)
+#define OMAP4_CM_SHADOW_FREQ_CONFIG1_RESTORE_OFFSET	0x0030
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0030)
+#define OMAP4_CM_AUTOIDLE_DPLL_CORE_RESTORE_OFFSET	0x0034
+#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0034)
+#define OMAP4_CM_MPU_CLKSTCTRL_RESTORE_OFFSET		0x0038
+#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0038)
+#define OMAP4_CM_CM1_PROFILING_CLKCTRL_RESTORE_OFFSET	0x003c
+#define OMAP4430_CM_CM1_PROFILING_CLKCTRL_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x003c)
+#define OMAP4_CM_DYN_DEP_PRESCAL_RESTORE_OFFSET		0x0040
+#define OMAP4430_CM_DYN_DEP_PRESCAL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0040)
+
+/* Function prototypes */
+extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx);
+extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx);
+extern u32 omap4_cm1_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+
+#endif
diff --git a/arch/arm/mach-omap2/cm2_44xx.h b/arch/arm/mach-omap2/cm2_44xx.h
new file mode 100644
index 00000000000..aa474504406
--- /dev/null
+++ b/arch/arm/mach-omap2/cm2_44xx.h
@@ -0,0 +1,508 @@
+/*
+ * OMAP44xx CM2 instance offset macros
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX",
+ *     or "OMAP4430".
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM2_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM2_44XX_H
+
+/* CM2 base address */
+#define OMAP4430_CM2_BASE		0x4a008000
+
+#define OMAP44XX_CM2_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + (inst) + (reg))
+
+/* CM2 instances */
+#define OMAP4430_CM2_OCP_SOCKET_INST	0x0000
+#define OMAP4430_CM2_CKGEN_INST		0x0100
+#define OMAP4430_CM2_ALWAYS_ON_INST	0x0600
+#define OMAP4430_CM2_CORE_INST		0x0700
+#define OMAP4430_CM2_IVAHD_INST		0x0f00
+#define OMAP4430_CM2_CAM_INST		0x1000
+#define OMAP4430_CM2_DSS_INST		0x1100
+#define OMAP4430_CM2_GFX_INST		0x1200
+#define OMAP4430_CM2_L3INIT_INST		0x1300
+#define OMAP4430_CM2_L4PER_INST		0x1400
+#define OMAP4430_CM2_CEFUSE_INST		0x1600
+#define OMAP4430_CM2_RESTORE_INST	0x1e00
+#define OMAP4430_CM2_INSTR_INST		0x1f00
+
+/* CM2 clockdomain register offsets (from instance start) */
+#define OMAP4430_CM2_ALWAYS_ON_ALWON_CDOFFS	0x0000
+#define OMAP4430_CM2_CORE_L3_1_CDOFFS		0x0000
+#define OMAP4430_CM2_CORE_L3_2_CDOFFS		0x0100
+#define OMAP4430_CM2_CORE_DUCATI_CDOFFS		0x0200
+#define OMAP4430_CM2_CORE_SDMA_CDOFFS		0x0300
+#define OMAP4430_CM2_CORE_MEMIF_CDOFFS		0x0400
+#define OMAP4430_CM2_CORE_D2D_CDOFFS		0x0500
+#define OMAP4430_CM2_CORE_L4CFG_CDOFFS		0x0600
+#define OMAP4430_CM2_CORE_L3INSTR_CDOFFS	0x0700
+#define OMAP4430_CM2_IVAHD_IVAHD_CDOFFS		0x0000
+#define OMAP4430_CM2_CAM_CAM_CDOFFS		0x0000
+#define OMAP4430_CM2_DSS_DSS_CDOFFS		0x0000
+#define OMAP4430_CM2_GFX_GFX_CDOFFS		0x0000
+#define OMAP4430_CM2_L3INIT_L3INIT_CDOFFS	0x0000
+#define OMAP4430_CM2_L4PER_L4PER_CDOFFS		0x0000
+#define OMAP4430_CM2_L4PER_L4SEC_CDOFFS		0x0180
+#define OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS	0x0000
+
+
+/* CM2 */
+
+/* CM2.OCP_SOCKET_CM2 register offsets */
+#define OMAP4_REVISION_CM2_OFFSET			0x0000
+#define OMAP4430_REVISION_CM2				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_INST, 0x0000)
+#define OMAP4_CM_CM2_PROFILING_CLKCTRL_OFFSET		0x0040
+#define OMAP4430_CM_CM2_PROFILING_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_INST, 0x0040)
+
+/* CM2.CKGEN_CM2 register offsets */
+#define OMAP4_CM_CLKSEL_DUCATI_ISS_ROOT_OFFSET		0x0000
+#define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0000)
+#define OMAP4_CM_CLKSEL_USB_60MHZ_OFFSET		0x0004
+#define OMAP4430_CM_CLKSEL_USB_60MHZ			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0004)
+#define OMAP4_CM_SCALE_FCLK_OFFSET			0x0008
+#define OMAP4430_CM_SCALE_FCLK				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0008)
+#define OMAP4_CM_CORE_DVFS_PERF1_OFFSET			0x0010
+#define OMAP4430_CM_CORE_DVFS_PERF1			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0010)
+#define OMAP4_CM_CORE_DVFS_PERF2_OFFSET			0x0014
+#define OMAP4430_CM_CORE_DVFS_PERF2			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0014)
+#define OMAP4_CM_CORE_DVFS_PERF3_OFFSET			0x0018
+#define OMAP4430_CM_CORE_DVFS_PERF3			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0018)
+#define OMAP4_CM_CORE_DVFS_PERF4_OFFSET			0x001c
+#define OMAP4430_CM_CORE_DVFS_PERF4			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x001c)
+#define OMAP4_CM_CORE_DVFS_CURRENT_OFFSET		0x0024
+#define OMAP4430_CM_CORE_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0024)
+#define OMAP4_CM_IVA_DVFS_PERF_TESLA_OFFSET		0x0028
+#define OMAP4430_CM_IVA_DVFS_PERF_TESLA			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0028)
+#define OMAP4_CM_IVA_DVFS_PERF_IVAHD_OFFSET		0x002c
+#define OMAP4430_CM_IVA_DVFS_PERF_IVAHD			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x002c)
+#define OMAP4_CM_IVA_DVFS_PERF_ABE_OFFSET		0x0030
+#define OMAP4430_CM_IVA_DVFS_PERF_ABE			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0030)
+#define OMAP4_CM_IVA_DVFS_CURRENT_OFFSET		0x0038
+#define OMAP4430_CM_IVA_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0038)
+#define OMAP4_CM_CLKMODE_DPLL_PER_OFFSET		0x0040
+#define OMAP4430_CM_CLKMODE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0040)
+#define OMAP4_CM_IDLEST_DPLL_PER_OFFSET			0x0044
+#define OMAP4430_CM_IDLEST_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0044)
+#define OMAP4_CM_AUTOIDLE_DPLL_PER_OFFSET		0x0048
+#define OMAP4430_CM_AUTOIDLE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0048)
+#define OMAP4_CM_CLKSEL_DPLL_PER_OFFSET			0x004c
+#define OMAP4430_CM_CLKSEL_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x004c)
+#define OMAP4_CM_DIV_M2_DPLL_PER_OFFSET			0x0050
+#define OMAP4430_CM_DIV_M2_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0050)
+#define OMAP4_CM_DIV_M3_DPLL_PER_OFFSET			0x0054
+#define OMAP4430_CM_DIV_M3_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0054)
+#define OMAP4_CM_DIV_M4_DPLL_PER_OFFSET			0x0058
+#define OMAP4430_CM_DIV_M4_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0058)
+#define OMAP4_CM_DIV_M5_DPLL_PER_OFFSET			0x005c
+#define OMAP4430_CM_DIV_M5_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x005c)
+#define OMAP4_CM_DIV_M6_DPLL_PER_OFFSET			0x0060
+#define OMAP4430_CM_DIV_M6_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0060)
+#define OMAP4_CM_DIV_M7_DPLL_PER_OFFSET			0x0064
+#define OMAP4430_CM_DIV_M7_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0064)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0068
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0068)
+#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_PER_OFFSET		0x006c
+#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c)
+#define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET		0x0080
+#define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0080)
+#define OMAP4_CM_IDLEST_DPLL_USB_OFFSET			0x0084
+#define OMAP4430_CM_IDLEST_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0084)
+#define OMAP4_CM_AUTOIDLE_DPLL_USB_OFFSET		0x0088
+#define OMAP4430_CM_AUTOIDLE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0088)
+#define OMAP4_CM_CLKSEL_DPLL_USB_OFFSET			0x008c
+#define OMAP4430_CM_CLKSEL_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x008c)
+#define OMAP4_CM_DIV_M2_DPLL_USB_OFFSET			0x0090
+#define OMAP4430_CM_DIV_M2_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0090)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a8
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00a8)
+#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_USB_OFFSET		0x00ac
+#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac)
+#define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET		0x00b4
+#define OMAP4430_CM_CLKDCOLDO_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00b4)
+#define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET		0x00c0
+#define OMAP4430_CM_CLKMODE_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00c0)
+#define OMAP4_CM_IDLEST_DPLL_UNIPRO_OFFSET		0x00c4
+#define OMAP4430_CM_IDLEST_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00c4)
+#define OMAP4_CM_AUTOIDLE_DPLL_UNIPRO_OFFSET		0x00c8
+#define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00c8)
+#define OMAP4_CM_CLKSEL_DPLL_UNIPRO_OFFSET		0x00cc
+#define OMAP4430_CM_CLKSEL_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00cc)
+#define OMAP4_CM_DIV_M2_DPLL_UNIPRO_OFFSET		0x00d0
+#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00d0)
+#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET	0x00e8
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00e8)
+#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_UNIPRO_OFFSET	0x00ec
+#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec)
+
+/* CM2.ALWAYS_ON_CM2 register offsets */
+#define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET			0x0000
+#define OMAP4430_CM_ALWON_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0000)
+#define OMAP4_CM_ALWON_MDMINTC_CLKCTRL_OFFSET		0x0020
+#define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0020)
+#define OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET		0x0028
+#define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0028)
+#define OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET		0x0030
+#define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0030)
+#define OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET		0x0038
+#define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0038)
+#define OMAP4_CM_ALWON_USBPHY_CLKCTRL_OFFSET		0x0040
+#define OMAP4430_CM_ALWON_USBPHY_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_INST, 0x0040)
+
+/* CM2.CORE_CM2 register offsets */
+#define OMAP4_CM_L3_1_CLKSTCTRL_OFFSET			0x0000
+#define OMAP4430_CM_L3_1_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0000)
+#define OMAP4_CM_L3_1_DYNAMICDEP_OFFSET			0x0008
+#define OMAP4430_CM_L3_1_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0008)
+#define OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET		0x0020
+#define OMAP4430_CM_L3_1_L3_1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0020)
+#define OMAP4_CM_L3_2_CLKSTCTRL_OFFSET			0x0100
+#define OMAP4430_CM_L3_2_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0100)
+#define OMAP4_CM_L3_2_DYNAMICDEP_OFFSET			0x0108
+#define OMAP4430_CM_L3_2_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0108)
+#define OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET		0x0120
+#define OMAP4430_CM_L3_2_L3_2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0120)
+#define OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET		0x0128
+#define OMAP4430_CM_L3_2_GPMC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0128)
+#define OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET		0x0130
+#define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0130)
+#define OMAP4_CM_DUCATI_CLKSTCTRL_OFFSET		0x0200
+#define OMAP4430_CM_DUCATI_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0200)
+#define OMAP4_CM_DUCATI_STATICDEP_OFFSET		0x0204
+#define OMAP4430_CM_DUCATI_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0204)
+#define OMAP4_CM_DUCATI_DYNAMICDEP_OFFSET		0x0208
+#define OMAP4430_CM_DUCATI_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0208)
+#define OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET		0x0220
+#define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0220)
+#define OMAP4_CM_SDMA_CLKSTCTRL_OFFSET			0x0300
+#define OMAP4430_CM_SDMA_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0300)
+#define OMAP4_CM_SDMA_STATICDEP_OFFSET			0x0304
+#define OMAP4430_CM_SDMA_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0304)
+#define OMAP4_CM_SDMA_DYNAMICDEP_OFFSET			0x0308
+#define OMAP4430_CM_SDMA_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0308)
+#define OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET		0x0320
+#define OMAP4430_CM_SDMA_SDMA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0320)
+#define OMAP4_CM_MEMIF_CLKSTCTRL_OFFSET			0x0400
+#define OMAP4430_CM_MEMIF_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0400)
+#define OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET		0x0420
+#define OMAP4430_CM_MEMIF_DMM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0420)
+#define OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET		0x0428
+#define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0428)
+#define OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET		0x0430
+#define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0430)
+#define OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET		0x0438
+#define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0438)
+#define OMAP4_CM_MEMIF_DLL_CLKCTRL_OFFSET		0x0440
+#define OMAP4430_CM_MEMIF_DLL_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0440)
+#define OMAP4_CM_MEMIF_EMIF_H1_CLKCTRL_OFFSET		0x0450
+#define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0450)
+#define OMAP4_CM_MEMIF_EMIF_H2_CLKCTRL_OFFSET		0x0458
+#define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0458)
+#define OMAP4_CM_MEMIF_DLL_H_CLKCTRL_OFFSET		0x0460
+#define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0460)
+#define OMAP4_CM_D2D_CLKSTCTRL_OFFSET			0x0500
+#define OMAP4430_CM_D2D_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0500)
+#define OMAP4_CM_D2D_STATICDEP_OFFSET			0x0504
+#define OMAP4430_CM_D2D_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0504)
+#define OMAP4_CM_D2D_DYNAMICDEP_OFFSET			0x0508
+#define OMAP4430_CM_D2D_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0508)
+#define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET		0x0520
+#define OMAP4430_CM_D2D_SAD2D_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0520)
+#define OMAP4_CM_D2D_INSTEM_ICR_CLKCTRL_OFFSET		0x0528
+#define OMAP4430_CM_D2D_INSTEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528)
+#define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET		0x0530
+#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0530)
+#define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
+#define OMAP4430_CM_L4CFG_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0600)
+#define OMAP4_CM_L4CFG_DYNAMICDEP_OFFSET		0x0608
+#define OMAP4430_CM_L4CFG_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0608)
+#define OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET		0x0620
+#define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0620)
+#define OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET		0x0628
+#define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0628)
+#define OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET		0x0630
+#define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0630)
+#define OMAP4_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET		0x0638
+#define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0638)
+#define OMAP4_CM_L3INSTR_CLKSTCTRL_OFFSET		0x0700
+#define OMAP4430_CM_L3INSTR_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0700)
+#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET		0x0720
+#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0720)
+#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET	0x0728
+#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0728)
+#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET		0x0740
+#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0740)
+
+/* CM2.IVAHD_CM2 register offsets */
+#define OMAP4_CM_IVAHD_CLKSTCTRL_OFFSET			0x0000
+#define OMAP4430_CM_IVAHD_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0000)
+#define OMAP4_CM_IVAHD_STATICDEP_OFFSET			0x0004
+#define OMAP4430_CM_IVAHD_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0004)
+#define OMAP4_CM_IVAHD_DYNAMICDEP_OFFSET		0x0008
+#define OMAP4430_CM_IVAHD_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0008)
+#define OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET		0x0020
+#define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0020)
+#define OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET		0x0028
+#define OMAP4430_CM_IVAHD_SL2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_INST, 0x0028)
+
+/* CM2.CAM_CM2 register offsets */
+#define OMAP4_CM_CAM_CLKSTCTRL_OFFSET			0x0000
+#define OMAP4430_CM_CAM_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0000)
+#define OMAP4_CM_CAM_STATICDEP_OFFSET			0x0004
+#define OMAP4430_CM_CAM_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0004)
+#define OMAP4_CM_CAM_DYNAMICDEP_OFFSET			0x0008
+#define OMAP4430_CM_CAM_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0008)
+#define OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET			0x0020
+#define OMAP4430_CM_CAM_ISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0020)
+#define OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET		0x0028
+#define OMAP4430_CM_CAM_FDIF_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_INST, 0x0028)
+
+/* CM2.DSS_CM2 register offsets */
+#define OMAP4_CM_DSS_CLKSTCTRL_OFFSET			0x0000
+#define OMAP4430_CM_DSS_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0000)
+#define OMAP4_CM_DSS_STATICDEP_OFFSET			0x0004
+#define OMAP4430_CM_DSS_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0004)
+#define OMAP4_CM_DSS_DYNAMICDEP_OFFSET			0x0008
+#define OMAP4430_CM_DSS_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0008)
+#define OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET			0x0020
+#define OMAP4430_CM_DSS_DSS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0020)
+#define OMAP4_CM_DSS_DEISS_CLKCTRL_OFFSET		0x0028
+#define OMAP4430_CM_DSS_DEISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_INST, 0x0028)
+
+/* CM2.GFX_CM2 register offsets */
+#define OMAP4_CM_GFX_CLKSTCTRL_OFFSET			0x0000
+#define OMAP4430_CM_GFX_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0000)
+#define OMAP4_CM_GFX_STATICDEP_OFFSET			0x0004
+#define OMAP4430_CM_GFX_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0004)
+#define OMAP4_CM_GFX_DYNAMICDEP_OFFSET			0x0008
+#define OMAP4430_CM_GFX_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0008)
+#define OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET			0x0020
+#define OMAP4430_CM_GFX_GFX_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_INST, 0x0020)
+
+/* CM2.L3INIT_CM2 register offsets */
+#define OMAP4_CM_L3INIT_CLKSTCTRL_OFFSET		0x0000
+#define OMAP4430_CM_L3INIT_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0000)
+#define OMAP4_CM_L3INIT_STATICDEP_OFFSET		0x0004
+#define OMAP4430_CM_L3INIT_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0004)
+#define OMAP4_CM_L3INIT_DYNAMICDEP_OFFSET		0x0008
+#define OMAP4430_CM_L3INIT_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0008)
+#define OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET		0x0028
+#define OMAP4430_CM_L3INIT_MMC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0028)
+#define OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET		0x0030
+#define OMAP4430_CM_L3INIT_MMC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0030)
+#define OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET		0x0038
+#define OMAP4430_CM_L3INIT_HSI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0038)
+#define OMAP4_CM_L3INIT_UNIPRO1_CLKCTRL_OFFSET		0x0040
+#define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0040)
+#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET		0x0058
+#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0058)
+#define OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET		0x0060
+#define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0060)
+#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET		0x0068
+#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0068)
+#define OMAP4_CM_L3INIT_P1500_CLKCTRL_OFFSET		0x0078
+#define OMAP4430_CM_L3INIT_P1500_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0078)
+#define OMAP4_CM_L3INIT_EMAC_CLKCTRL_OFFSET		0x0080
+#define OMAP4430_CM_L3INIT_EMAC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0080)
+#define OMAP4_CM_L3INIT_SATA_CLKCTRL_OFFSET		0x0088
+#define OMAP4430_CM_L3INIT_SATA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0088)
+#define OMAP4_CM_L3INIT_TPPSS_CLKCTRL_OFFSET		0x0090
+#define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0090)
+#define OMAP4_CM_L3INIT_PCIESS_CLKCTRL_OFFSET		0x0098
+#define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x0098)
+#define OMAP4_CM_L3INIT_CCPTX_CLKCTRL_OFFSET		0x00a8
+#define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00a8)
+#define OMAP4_CM_L3INIT_XHPI_CLKCTRL_OFFSET		0x00c0
+#define OMAP4430_CM_L3INIT_XHPI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00c0)
+#define OMAP4_CM_L3INIT_MMC6_CLKCTRL_OFFSET		0x00c8
+#define OMAP4430_CM_L3INIT_MMC6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00c8)
+#define OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET	0x00d0
+#define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00d0)
+#define OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET	0x00e0
+#define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_INST, 0x00e0)
+
+/* CM2.L4PER_CM2 register offsets */
+#define OMAP4_CM_L4PER_CLKSTCTRL_OFFSET			0x0000
+#define OMAP4430_CM_L4PER_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0000)
+#define OMAP4_CM_L4PER_DYNAMICDEP_OFFSET		0x0008
+#define OMAP4430_CM_L4PER_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0008)
+#define OMAP4_CM_L4PER_ADC_CLKCTRL_OFFSET		0x0020
+#define OMAP4430_CM_L4PER_ADC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0020)
+#define OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET		0x0028
+#define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0028)
+#define OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET		0x0030
+#define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0030)
+#define OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET		0x0038
+#define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0038)
+#define OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET		0x0040
+#define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0040)
+#define OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET		0x0048
+#define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0048)
+#define OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET		0x0050
+#define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0050)
+#define OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET		0x0058
+#define OMAP4430_CM_L4PER_ELM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0058)
+#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET		0x0060
+#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0060)
+#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET		0x0068
+#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0068)
+#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET		0x0070
+#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0070)
+#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET		0x0078
+#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0078)
+#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET		0x0080
+#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0080)
+#define OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET		0x0088
+#define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0088)
+#define OMAP4_CM_L4PER_HECC1_CLKCTRL_OFFSET		0x0090
+#define OMAP4430_CM_L4PER_HECC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0090)
+#define OMAP4_CM_L4PER_HECC2_CLKCTRL_OFFSET		0x0098
+#define OMAP4430_CM_L4PER_HECC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0098)
+#define OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET		0x00a0
+#define OMAP4430_CM_L4PER_I2C1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00a0)
+#define OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET		0x00a8
+#define OMAP4430_CM_L4PER_I2C2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00a8)
+#define OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET		0x00b0
+#define OMAP4430_CM_L4PER_I2C3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00b0)
+#define OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET		0x00b8
+#define OMAP4430_CM_L4PER_I2C4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00b8)
+#define OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET		0x00c0
+#define OMAP4430_CM_L4PER_L4PER_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00c0)
+#define OMAP4_CM_L4PER_MCASP2_CLKCTRL_OFFSET		0x00d0
+#define OMAP4430_CM_L4PER_MCASP2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00d0)
+#define OMAP4_CM_L4PER_MCASP3_CLKCTRL_OFFSET		0x00d8
+#define OMAP4430_CM_L4PER_MCASP3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00d8)
+#define OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET		0x00e0
+#define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00e0)
+#define OMAP4_CM_L4PER_MGATE_CLKCTRL_OFFSET		0x00e8
+#define OMAP4430_CM_L4PER_MGATE_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00e8)
+#define OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET		0x00f0
+#define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00f0)
+#define OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET		0x00f8
+#define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x00f8)
+#define OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET		0x0100
+#define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0100)
+#define OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET		0x0108
+#define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0108)
+#define OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET		0x0120
+#define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0120)
+#define OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET		0x0128
+#define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0128)
+#define OMAP4_CM_L4PER_MSPROHG_CLKCTRL_OFFSET		0x0130
+#define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0130)
+#define OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET		0x0138
+#define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0138)
+#define OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET		0x0140
+#define OMAP4430_CM_L4PER_UART1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0140)
+#define OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET		0x0148
+#define OMAP4430_CM_L4PER_UART2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0148)
+#define OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET		0x0150
+#define OMAP4430_CM_L4PER_UART3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0150)
+#define OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET		0x0158
+#define OMAP4430_CM_L4PER_UART4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0158)
+#define OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET		0x0160
+#define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0160)
+#define OMAP4_CM_L4PER_I2C5_CLKCTRL_OFFSET		0x0168
+#define OMAP4430_CM_L4PER_I2C5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0168)
+#define OMAP4_CM_L4SEC_CLKSTCTRL_OFFSET			0x0180
+#define OMAP4430_CM_L4SEC_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0180)
+#define OMAP4_CM_L4SEC_STATICDEP_OFFSET			0x0184
+#define OMAP4430_CM_L4SEC_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0184)
+#define OMAP4_CM_L4SEC_DYNAMICDEP_OFFSET		0x0188
+#define OMAP4430_CM_L4SEC_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x0188)
+#define OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET		0x01a0
+#define OMAP4430_CM_L4SEC_AES1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01a0)
+#define OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET		0x01a8
+#define OMAP4430_CM_L4SEC_AES2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01a8)
+#define OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET		0x01b0
+#define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01b0)
+#define OMAP4_CM_L4SEC_PKAEIP29_CLKCTRL_OFFSET		0x01b8
+#define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01b8)
+#define OMAP4_CM_L4SEC_RNG_CLKCTRL_OFFSET		0x01c0
+#define OMAP4430_CM_L4SEC_RNG_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01c0)
+#define OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET		0x01c8
+#define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01c8)
+#define OMAP4_CM_L4SEC_CRYPTODMA_CLKCTRL_OFFSET		0x01d8
+#define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_INST, 0x01d8)
+
+/* CM2.CEFUSE_CM2 register offsets */
+#define OMAP4_CM_CEFUSE_CLKSTCTRL_OFFSET		0x0000
+#define OMAP4430_CM_CEFUSE_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0000)
+#define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
+#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0020)
+
+/* CM2.RESTORE_CM2 register offsets */
+#define OMAP4_CM_L3_1_CLKSTCTRL_RESTORE_OFFSET		0x0000
+#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0000)
+#define OMAP4_CM_L3_2_CLKSTCTRL_RESTORE_OFFSET		0x0004
+#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0004)
+#define OMAP4_CM_L4CFG_CLKSTCTRL_RESTORE_OFFSET		0x0008
+#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0008)
+#define OMAP4_CM_MEMIF_CLKSTCTRL_RESTORE_OFFSET		0x000c
+#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x000c)
+#define OMAP4_CM_L4PER_CLKSTCTRL_RESTORE_OFFSET		0x0010
+#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0010)
+#define OMAP4_CM_L3INIT_CLKSTCTRL_RESTORE_OFFSET	0x0014
+#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0014)
+#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_RESTORE_OFFSET	0x0018
+#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0018)
+#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE_OFFSET	0x001c
+#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x001c)
+#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE_OFFSET	0x0020
+#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0020)
+#define OMAP4_CM_CM2_PROFILING_CLKCTRL_RESTORE_OFFSET	0x0024
+#define OMAP4430_CM_CM2_PROFILING_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0024)
+#define OMAP4_CM_D2D_STATICDEP_RESTORE_OFFSET		0x0028
+#define OMAP4430_CM_D2D_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0028)
+#define OMAP4_CM_L3_1_DYNAMICDEP_RESTORE_OFFSET		0x002c
+#define OMAP4430_CM_L3_1_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x002c)
+#define OMAP4_CM_L3_2_DYNAMICDEP_RESTORE_OFFSET		0x0030
+#define OMAP4430_CM_L3_2_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0030)
+#define OMAP4_CM_D2D_DYNAMICDEP_RESTORE_OFFSET		0x0034
+#define OMAP4430_CM_D2D_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0034)
+#define OMAP4_CM_L4CFG_DYNAMICDEP_RESTORE_OFFSET	0x0038
+#define OMAP4430_CM_L4CFG_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0038)
+#define OMAP4_CM_L4PER_DYNAMICDEP_RESTORE_OFFSET	0x003c
+#define OMAP4430_CM_L4PER_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x003c)
+#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_RESTORE_OFFSET	0x0040
+#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0040)
+#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_RESTORE_OFFSET	0x0044
+#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0044)
+#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_RESTORE_OFFSET	0x0048
+#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0048)
+#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_RESTORE_OFFSET	0x004c
+#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x004c)
+#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_RESTORE_OFFSET	0x0050
+#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0050)
+#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE_OFFSET	0x0054
+#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0054)
+#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE_OFFSET	0x0058
+#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0058)
+#define OMAP4_CM_SDMA_STATICDEP_RESTORE_OFFSET		0x005c
+#define OMAP4430_CM_SDMA_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x005c)
+
+/* Function prototypes */
+extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx);
+extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx);
+extern u32 omap4_cm2_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+
+#endif
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.c b/arch/arm/mach-omap2/cm2xxx_3xxx.c
new file mode 100644
index 00000000000..96954aa4867
--- /dev/null
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.c
@@ -0,0 +1,471 @@
+/*
+ * OMAP2/3 CM module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
+
+static const u8 cm_idlest_offs[] = {
+	CM_IDLEST1, CM_IDLEST2, OMAP2430_CM_IDLEST3
+};
+
+u32 omap2_cm_read_mod_reg(s16 module, u16 idx)
+{
+	return __raw_readl(cm_base + module + idx);
+}
+
+void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	__raw_writel(val, cm_base + module + idx);
+}
+
+/* Read-modify-write a register in a CM module. Caller must lock */
+u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(module, idx);
+	v &= ~mask;
+	v |= bits;
+	omap2_cm_write_mod_reg(v, module, idx);
+
+	return v;
+}
+
+u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	return omap2_cm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	return omap2_cm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
+
+/*
+ *
+ */
+
+static void _write_clktrctrl(u8 c, s16 module, u32 mask)
+{
+	u32 v;
+
+	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+	v &= ~mask;
+	v |= c << __ffs(mask);
+	omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
+}
+
+bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+{
+	u32 v;
+	bool ret = 0;
+
+	BUG_ON(!cpu_is_omap24xx() && !cpu_is_omap34xx());
+
+	v = omap2_cm_read_mod_reg(module, OMAP2_CM_CLKSTCTRL);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	if (cpu_is_omap24xx())
+		ret = (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
+	else
+		ret = (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
+
+	return ret;
+}
+
+void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+{
+	_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
+}
+
+void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+{
+	_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+}
+
+void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+{
+	_write_clktrctrl(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
+}
+
+void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+{
+	_write_clktrctrl(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
+}
+
+void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask)
+{
+	_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, module, mask);
+}
+
+void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
+{
+	_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, module, mask);
+}
+
+
+/*
+ *
+ */
+
+/**
+ * omap2_cm_wait_idlest_ready - wait for a module to leave idle or standby
+ * @prcm_mod: PRCM module offset
+ * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * XXX document
+ */
+int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+{
+	int ena = 0, i = 0;
+	u8 cm_idlest_reg;
+	u32 mask;
+
+	if (!idlest_id || (idlest_id > ARRAY_SIZE(cm_idlest_offs)))
+		return -EINVAL;
+
+	cm_idlest_reg = cm_idlest_offs[idlest_id - 1];
+
+	mask = 1 << idlest_shift;
+
+	if (cpu_is_omap24xx())
+		ena = mask;
+	else if (cpu_is_omap34xx())
+		ena = 0;
+	else
+		BUG();
+
+	omap_test_timeout(((omap2_cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
+			  MAX_MODULE_READY_TIME, i);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
+/*
+ * Context save/restore code - OMAP3 only
+ */
+#ifdef CONFIG_ARCH_OMAP3
+struct omap3_cm_regs {
+	u32 iva2_cm_clksel1;
+	u32 iva2_cm_clksel2;
+	u32 cm_sysconfig;
+	u32 sgx_cm_clksel;
+	u32 dss_cm_clksel;
+	u32 cam_cm_clksel;
+	u32 per_cm_clksel;
+	u32 emu_cm_clksel;
+	u32 emu_cm_clkstctrl;
+	u32 pll_cm_autoidle2;
+	u32 pll_cm_clksel4;
+	u32 pll_cm_clksel5;
+	u32 pll_cm_clken2;
+	u32 cm_polctrl;
+	u32 iva2_cm_fclken;
+	u32 iva2_cm_clken_pll;
+	u32 core_cm_fclken1;
+	u32 core_cm_fclken3;
+	u32 sgx_cm_fclken;
+	u32 wkup_cm_fclken;
+	u32 dss_cm_fclken;
+	u32 cam_cm_fclken;
+	u32 per_cm_fclken;
+	u32 usbhost_cm_fclken;
+	u32 core_cm_iclken1;
+	u32 core_cm_iclken2;
+	u32 core_cm_iclken3;
+	u32 sgx_cm_iclken;
+	u32 wkup_cm_iclken;
+	u32 dss_cm_iclken;
+	u32 cam_cm_iclken;
+	u32 per_cm_iclken;
+	u32 usbhost_cm_iclken;
+	u32 iva2_cm_autoidle2;
+	u32 mpu_cm_autoidle2;
+	u32 iva2_cm_clkstctrl;
+	u32 mpu_cm_clkstctrl;
+	u32 core_cm_clkstctrl;
+	u32 sgx_cm_clkstctrl;
+	u32 dss_cm_clkstctrl;
+	u32 cam_cm_clkstctrl;
+	u32 per_cm_clkstctrl;
+	u32 neon_cm_clkstctrl;
+	u32 usbhost_cm_clkstctrl;
+	u32 core_cm_autoidle1;
+	u32 core_cm_autoidle2;
+	u32 core_cm_autoidle3;
+	u32 wkup_cm_autoidle;
+	u32 dss_cm_autoidle;
+	u32 cam_cm_autoidle;
+	u32 per_cm_autoidle;
+	u32 usbhost_cm_autoidle;
+	u32 sgx_cm_sleepdep;
+	u32 dss_cm_sleepdep;
+	u32 cam_cm_sleepdep;
+	u32 per_cm_sleepdep;
+	u32 usbhost_cm_sleepdep;
+	u32 cm_clkout_ctrl;
+};
+
+static struct omap3_cm_regs cm_context;
+
+void omap3_cm_save_context(void)
+{
+	cm_context.iva2_cm_clksel1 =
+		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1);
+	cm_context.iva2_cm_clksel2 =
+		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2);
+	cm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
+	cm_context.sgx_cm_clksel =
+		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
+	cm_context.dss_cm_clksel =
+		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
+	cm_context.cam_cm_clksel =
+		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSEL);
+	cm_context.per_cm_clksel =
+		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSEL);
+	cm_context.emu_cm_clksel =
+		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
+	cm_context.emu_cm_clkstctrl =
+		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
+	cm_context.pll_cm_autoidle2 =
+		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
+	cm_context.pll_cm_clksel4 =
+		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
+	cm_context.pll_cm_clksel5 =
+		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
+	cm_context.pll_cm_clken2 =
+		omap2_cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
+	cm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
+	cm_context.iva2_cm_fclken =
+		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
+	cm_context.iva2_cm_clken_pll =
+		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL);
+	cm_context.core_cm_fclken1 =
+		omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	cm_context.core_cm_fclken3 =
+		omap2_cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+	cm_context.sgx_cm_fclken =
+		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_FCLKEN);
+	cm_context.wkup_cm_fclken =
+		omap2_cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+	cm_context.dss_cm_fclken =
+		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_FCLKEN);
+	cm_context.cam_cm_fclken =
+		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_FCLKEN);
+	cm_context.per_cm_fclken =
+		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+	cm_context.usbhost_cm_fclken =
+		omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
+	cm_context.core_cm_iclken1 =
+		omap2_cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+	cm_context.core_cm_iclken2 =
+		omap2_cm_read_mod_reg(CORE_MOD, CM_ICLKEN2);
+	cm_context.core_cm_iclken3 =
+		omap2_cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+	cm_context.sgx_cm_iclken =
+		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_ICLKEN);
+	cm_context.wkup_cm_iclken =
+		omap2_cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+	cm_context.dss_cm_iclken =
+		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_ICLKEN);
+	cm_context.cam_cm_iclken =
+		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_ICLKEN);
+	cm_context.per_cm_iclken =
+		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+	cm_context.usbhost_cm_iclken =
+		omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
+	cm_context.iva2_cm_autoidle2 =
+		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+	cm_context.mpu_cm_autoidle2 =
+		omap2_cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
+	cm_context.iva2_cm_clkstctrl =
+		omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
+	cm_context.mpu_cm_clkstctrl =
+		omap2_cm_read_mod_reg(MPU_MOD, OMAP2_CM_CLKSTCTRL);
+	cm_context.core_cm_clkstctrl =
+		omap2_cm_read_mod_reg(CORE_MOD, OMAP2_CM_CLKSTCTRL);
+	cm_context.sgx_cm_clkstctrl =
+		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD, OMAP2_CM_CLKSTCTRL);
+	cm_context.dss_cm_clkstctrl =
+		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP2_CM_CLKSTCTRL);
+	cm_context.cam_cm_clkstctrl =
+		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP2_CM_CLKSTCTRL);
+	cm_context.per_cm_clkstctrl =
+		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, OMAP2_CM_CLKSTCTRL);
+	cm_context.neon_cm_clkstctrl =
+		omap2_cm_read_mod_reg(OMAP3430_NEON_MOD, OMAP2_CM_CLKSTCTRL);
+	cm_context.usbhost_cm_clkstctrl =
+		omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+				      OMAP2_CM_CLKSTCTRL);
+	cm_context.core_cm_autoidle1 =
+		omap2_cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1);
+	cm_context.core_cm_autoidle2 =
+		omap2_cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE2);
+	cm_context.core_cm_autoidle3 =
+		omap2_cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE3);
+	cm_context.wkup_cm_autoidle =
+		omap2_cm_read_mod_reg(WKUP_MOD, CM_AUTOIDLE);
+	cm_context.dss_cm_autoidle =
+		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, CM_AUTOIDLE);
+	cm_context.cam_cm_autoidle =
+		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, CM_AUTOIDLE);
+	cm_context.per_cm_autoidle =
+		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+	cm_context.usbhost_cm_autoidle =
+		omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
+	cm_context.sgx_cm_sleepdep =
+		omap2_cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+				      OMAP3430_CM_SLEEPDEP);
+	cm_context.dss_cm_sleepdep =
+		omap2_cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP3430_CM_SLEEPDEP);
+	cm_context.cam_cm_sleepdep =
+		omap2_cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP3430_CM_SLEEPDEP);
+	cm_context.per_cm_sleepdep =
+		omap2_cm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_CM_SLEEPDEP);
+	cm_context.usbhost_cm_sleepdep =
+		omap2_cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+				      OMAP3430_CM_SLEEPDEP);
+	cm_context.cm_clkout_ctrl =
+		omap2_cm_read_mod_reg(OMAP3430_CCR_MOD,
+				      OMAP3_CM_CLKOUT_CTRL_OFFSET);
+}
+
+void omap3_cm_restore_context(void)
+{
+	omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel1, OMAP3430_IVA2_MOD,
+			       CM_CLKSEL1);
+	omap2_cm_write_mod_reg(cm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD,
+			       CM_CLKSEL2);
+	__raw_writel(cm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
+	omap2_cm_write_mod_reg(cm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
+			       CM_CLKSEL);
+	omap2_cm_write_mod_reg(cm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
+			       CM_CLKSEL);
+	omap2_cm_write_mod_reg(cm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
+			       CM_CLKSEL);
+	omap2_cm_write_mod_reg(cm_context.per_cm_clksel, OMAP3430_PER_MOD,
+			       CM_CLKSEL);
+	omap2_cm_write_mod_reg(cm_context.emu_cm_clksel, OMAP3430_EMU_MOD,
+			       CM_CLKSEL1);
+	omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
+			       OMAP2_CM_CLKSTCTRL);
+	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD,
+			       CM_AUTOIDLE2);
+	omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD,
+			       OMAP3430ES2_CM_CLKSEL4);
+	omap2_cm_write_mod_reg(cm_context.pll_cm_clksel5, PLL_MOD,
+			       OMAP3430ES2_CM_CLKSEL5);
+	omap2_cm_write_mod_reg(cm_context.pll_cm_clken2, PLL_MOD,
+			       OMAP3430ES2_CM_CLKEN2);
+	__raw_writel(cm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
+	omap2_cm_write_mod_reg(cm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD,
+			       CM_FCLKEN);
+	omap2_cm_write_mod_reg(cm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD,
+			       OMAP3430_CM_CLKEN_PLL);
+	omap2_cm_write_mod_reg(cm_context.core_cm_fclken1, CORE_MOD,
+			       CM_FCLKEN1);
+	omap2_cm_write_mod_reg(cm_context.core_cm_fclken3, CORE_MOD,
+			       OMAP3430ES2_CM_FCLKEN3);
+	omap2_cm_write_mod_reg(cm_context.sgx_cm_fclken, OMAP3430ES2_SGX_MOD,
+			       CM_FCLKEN);
+	omap2_cm_write_mod_reg(cm_context.wkup_cm_fclken, WKUP_MOD, CM_FCLKEN);
+	omap2_cm_write_mod_reg(cm_context.dss_cm_fclken, OMAP3430_DSS_MOD,
+			       CM_FCLKEN);
+	omap2_cm_write_mod_reg(cm_context.cam_cm_fclken, OMAP3430_CAM_MOD,
+			       CM_FCLKEN);
+	omap2_cm_write_mod_reg(cm_context.per_cm_fclken, OMAP3430_PER_MOD,
+			       CM_FCLKEN);
+	omap2_cm_write_mod_reg(cm_context.usbhost_cm_fclken,
+			       OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
+	omap2_cm_write_mod_reg(cm_context.core_cm_iclken1, CORE_MOD,
+			       CM_ICLKEN1);
+	omap2_cm_write_mod_reg(cm_context.core_cm_iclken2, CORE_MOD,
+			       CM_ICLKEN2);
+	omap2_cm_write_mod_reg(cm_context.core_cm_iclken3, CORE_MOD,
+			       CM_ICLKEN3);
+	omap2_cm_write_mod_reg(cm_context.sgx_cm_iclken, OMAP3430ES2_SGX_MOD,
+			       CM_ICLKEN);
+	omap2_cm_write_mod_reg(cm_context.wkup_cm_iclken, WKUP_MOD, CM_ICLKEN);
+	omap2_cm_write_mod_reg(cm_context.dss_cm_iclken, OMAP3430_DSS_MOD,
+			       CM_ICLKEN);
+	omap2_cm_write_mod_reg(cm_context.cam_cm_iclken, OMAP3430_CAM_MOD,
+			       CM_ICLKEN);
+	omap2_cm_write_mod_reg(cm_context.per_cm_iclken, OMAP3430_PER_MOD,
+			       CM_ICLKEN);
+	omap2_cm_write_mod_reg(cm_context.usbhost_cm_iclken,
+			       OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
+	omap2_cm_write_mod_reg(cm_context.iva2_cm_autoidle2, OMAP3430_IVA2_MOD,
+			       CM_AUTOIDLE2);
+	omap2_cm_write_mod_reg(cm_context.mpu_cm_autoidle2, MPU_MOD,
+			       CM_AUTOIDLE2);
+	omap2_cm_write_mod_reg(cm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
+			       OMAP2_CM_CLKSTCTRL);
+	omap2_cm_write_mod_reg(cm_context.mpu_cm_clkstctrl, MPU_MOD,
+			       OMAP2_CM_CLKSTCTRL);
+	omap2_cm_write_mod_reg(cm_context.core_cm_clkstctrl, CORE_MOD,
+			       OMAP2_CM_CLKSTCTRL);
+	omap2_cm_write_mod_reg(cm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD,
+			       OMAP2_CM_CLKSTCTRL);
+	omap2_cm_write_mod_reg(cm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD,
+			       OMAP2_CM_CLKSTCTRL);
+	omap2_cm_write_mod_reg(cm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD,
+			       OMAP2_CM_CLKSTCTRL);
+	omap2_cm_write_mod_reg(cm_context.per_cm_clkstctrl, OMAP3430_PER_MOD,
+			       OMAP2_CM_CLKSTCTRL);
+	omap2_cm_write_mod_reg(cm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD,
+			       OMAP2_CM_CLKSTCTRL);
+	omap2_cm_write_mod_reg(cm_context.usbhost_cm_clkstctrl,
+			       OMAP3430ES2_USBHOST_MOD, OMAP2_CM_CLKSTCTRL);
+	omap2_cm_write_mod_reg(cm_context.core_cm_autoidle1, CORE_MOD,
+			       CM_AUTOIDLE1);
+	omap2_cm_write_mod_reg(cm_context.core_cm_autoidle2, CORE_MOD,
+			       CM_AUTOIDLE2);
+	omap2_cm_write_mod_reg(cm_context.core_cm_autoidle3, CORE_MOD,
+			       CM_AUTOIDLE3);
+	omap2_cm_write_mod_reg(cm_context.wkup_cm_autoidle, WKUP_MOD,
+			       CM_AUTOIDLE);
+	omap2_cm_write_mod_reg(cm_context.dss_cm_autoidle, OMAP3430_DSS_MOD,
+			       CM_AUTOIDLE);
+	omap2_cm_write_mod_reg(cm_context.cam_cm_autoidle, OMAP3430_CAM_MOD,
+			       CM_AUTOIDLE);
+	omap2_cm_write_mod_reg(cm_context.per_cm_autoidle, OMAP3430_PER_MOD,
+			       CM_AUTOIDLE);
+	omap2_cm_write_mod_reg(cm_context.usbhost_cm_autoidle,
+			       OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
+	omap2_cm_write_mod_reg(cm_context.sgx_cm_sleepdep, OMAP3430ES2_SGX_MOD,
+			       OMAP3430_CM_SLEEPDEP);
+	omap2_cm_write_mod_reg(cm_context.dss_cm_sleepdep, OMAP3430_DSS_MOD,
+			       OMAP3430_CM_SLEEPDEP);
+	omap2_cm_write_mod_reg(cm_context.cam_cm_sleepdep, OMAP3430_CAM_MOD,
+			       OMAP3430_CM_SLEEPDEP);
+	omap2_cm_write_mod_reg(cm_context.per_cm_sleepdep, OMAP3430_PER_MOD,
+			       OMAP3430_CM_SLEEPDEP);
+	omap2_cm_write_mod_reg(cm_context.usbhost_cm_sleepdep,
+			       OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
+	omap2_cm_write_mod_reg(cm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
+			       OMAP3_CM_CLKOUT_CTRL_OFFSET);
+}
+#endif
diff --git a/arch/arm/mach-omap2/cm2xxx_3xxx.h b/arch/arm/mach-omap2/cm2xxx_3xxx.h
new file mode 100644
index 00000000000..5e9ea5bd60b
--- /dev/null
+++ b/arch/arm/mach-omap2/cm2xxx_3xxx.h
@@ -0,0 +1,147 @@
+/*
+ * OMAP2/3 Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The CM hardware modules on the OMAP2/3 are quite similar to each
+ * other.  The CM modules/instances on OMAP4 are quite different, so
+ * they are handled in a separate file.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
+#define __ARCH_ASM_MACH_OMAP2_CM2XXX_3XXX_H
+
+#include "prcm-common.h"
+
+#define OMAP2420_CM_REGADDR(module, reg)				\
+			OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+#define OMAP2430_CM_REGADDR(module, reg)				\
+			OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+#define OMAP34XX_CM_REGADDR(module, reg)				\
+			OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP3-specific global CM registers
+ * Use cm_{read,write}_reg() with these registers.
+ * These registers appear once per CM module.
+ */
+
+#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
+
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific CM register offsets from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* Common between OMAP2 and OMAP3 */
+
+#define CM_FCLKEN					0x0000
+#define CM_FCLKEN1					CM_FCLKEN
+#define CM_CLKEN					CM_FCLKEN
+#define CM_ICLKEN					0x0010
+#define CM_ICLKEN1					CM_ICLKEN
+#define CM_ICLKEN2					0x0014
+#define CM_ICLKEN3					0x0018
+#define CM_IDLEST					0x0020
+#define CM_IDLEST1					CM_IDLEST
+#define CM_IDLEST2					0x0024
+#define CM_AUTOIDLE					0x0030
+#define CM_AUTOIDLE1					CM_AUTOIDLE
+#define CM_AUTOIDLE2					0x0034
+#define CM_AUTOIDLE3					0x0038
+#define CM_CLKSEL					0x0040
+#define CM_CLKSEL1					CM_CLKSEL
+#define CM_CLKSEL2					0x0044
+#define OMAP2_CM_CLKSTCTRL				0x0048
+
+/* OMAP2-specific register offsets */
+
+#define OMAP24XX_CM_FCLKEN2				0x0004
+#define OMAP24XX_CM_ICLKEN4				0x001c
+#define OMAP24XX_CM_AUTOIDLE4				0x003c
+
+#define OMAP2430_CM_IDLEST3				0x0028
+
+/* OMAP3-specific register offsets */
+
+#define OMAP3430_CM_CLKEN_PLL				0x0004
+#define OMAP3430ES2_CM_CLKEN2				0x0004
+#define OMAP3430ES2_CM_FCLKEN3				0x0008
+#define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
+#define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
+#define OMAP3430ES2_CM_AUTOIDLE2_PLL			CM_AUTOIDLE2
+#define OMAP3430_CM_CLKSEL1				CM_CLKSEL
+#define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
+#define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
+#define OMAP3430_CM_SLEEPDEP				CM_CLKSEL2
+#define OMAP3430_CM_CLKSEL3				OMAP2_CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSTST				0x004c
+#define OMAP3430ES2_CM_CLKSEL4				0x004c
+#define OMAP3430ES2_CM_CLKSEL5				0x0050
+#define OMAP3430_CM_CLKSEL2_EMU				0x0050
+#define OMAP3430_CM_CLKSEL3_EMU				0x0054
+
+
+/* CM_IDLEST bit field values to indicate deasserted IdleReq */
+
+#define OMAP24XX_CM_IDLEST_VAL				0
+#define OMAP34XX_CM_IDLEST_VAL				1
+
+
+/* Clock management domain register get/set */
+
+#ifndef __ASSEMBLER__
+
+extern u32 omap2_cm_read_mod_reg(s16 module, u16 idx);
+extern void omap2_cm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 omap2_cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+
+extern int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
+				      u8 idlest_shift);
+extern u32 omap2_cm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
+extern u32 omap2_cm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
+
+extern bool omap2_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
+extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+
+extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
+extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
+
+#endif
+
+/* CM register bits shared between 24XX and 3430 */
+
+/* CM_CLKSEL_GFX */
+#define OMAP_CLKSEL_GFX_SHIFT				0
+#define OMAP_CLKSEL_GFX_MASK				(0x7 << 0)
+
+/* CM_ICLKEN_GFX */
+#define OMAP_EN_GFX_SHIFT				0
+#define OMAP_EN_GFX_MASK				(1 << 0)
+
+/* CM_IDLEST_GFX */
+#define OMAP_ST_GFX_MASK				(1 << 0)
+
+
+/* Function prototypes */
+# ifndef __ASSEMBLER__
+extern void omap3_cm_save_context(void);
+extern void omap3_cm_restore_context(void);
+# endif
+
+#endif
diff --git a/arch/arm/mach-omap2/cm44xx.c b/arch/arm/mach-omap2/cm44xx.c
new file mode 100644
index 00000000000..e96f53ea01a
--- /dev/null
+++ b/arch/arm/mach-omap2/cm44xx.c
@@ -0,0 +1,52 @@
+/*
+ * OMAP4 CM1, CM2 module low-level functions
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These functions are intended to be used only by the cminst44xx.c file.
+ * XXX Perhaps we should just move them there and make them static.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "cm.h"
+#include "cm1_44xx.h"
+#include "cm2_44xx.h"
+#include "cm-regbits-44xx.h"
+
+/* CM1 hardware module low-level functions */
+
+/* Read a register in CM1 */
+u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg)
+{
+	return __raw_readl(OMAP44XX_CM1_REGADDR(inst, reg));
+}
+
+/* Write into a register in CM1 */
+void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg)
+{
+	__raw_writel(val, OMAP44XX_CM1_REGADDR(inst, reg));
+}
+
+/* Read a register in CM2 */
+u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg)
+{
+	return __raw_readl(OMAP44XX_CM2_REGADDR(inst, reg));
+}
+
+/* Write into a register in CM2 */
+void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg)
+{
+	__raw_writel(val, OMAP44XX_CM2_REGADDR(inst, reg));
+}
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
index 3c35a87cb90..48fc3f426fb 100644
--- a/arch/arm/mach-omap2/cm44xx.h
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -1,667 +1,31 @@
 /*
- * OMAP44xx CM1 & CM2 instance offset macros
+ * OMAP4 Clock Management (CM) definitions
  *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
+ * Written by Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * OMAP4 has two separate CM blocks, CM1 and CM2.  This file contains
+ * macros and function prototypes that are applicable to both.
  */
+#ifndef __ARCH_ASM_MACH_OMAP2_CM44XX_H
+#define __ARCH_ASM_MACH_OMAP2_CM44XX_H
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CM44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CM44XX_H
-
-
-/* CM1 */
-
-/* CM1.OCP_SOCKET_CM1 register offsets */
-#define OMAP4_REVISION_CM1_OFFSET			0x0000
-#define OMAP4430_REVISION_CM1				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0000)
-#define OMAP4_CM_CM1_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_CM1_PROFILING_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0040)
-
-/* CM1.CKGEN_CM1 register offsets */
-#define OMAP4_CM_CLKSEL_CORE_OFFSET			0x0000
-#define OMAP4430_CM_CLKSEL_CORE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0000)
-#define OMAP4_CM_CLKSEL_ABE_OFFSET			0x0008
-#define OMAP4430_CM_CLKSEL_ABE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0008)
-#define OMAP4_CM_DLL_CTRL_OFFSET			0x0010
-#define OMAP4430_CM_DLL_CTRL				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0010)
-#define OMAP4_CM_CLKMODE_DPLL_CORE_OFFSET		0x0020
-#define OMAP4430_CM_CLKMODE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0020)
-#define OMAP4_CM_IDLEST_DPLL_CORE_OFFSET		0x0024
-#define OMAP4430_CM_IDLEST_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0024)
-#define OMAP4_CM_AUTOIDLE_DPLL_CORE_OFFSET		0x0028
-#define OMAP4430_CM_AUTOIDLE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0028)
-#define OMAP4_CM_CLKSEL_DPLL_CORE_OFFSET		0x002c
-#define OMAP4430_CM_CLKSEL_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x002c)
-#define OMAP4_CM_DIV_M2_DPLL_CORE_OFFSET		0x0030
-#define OMAP4430_CM_DIV_M2_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0030)
-#define OMAP4_CM_DIV_M3_DPLL_CORE_OFFSET		0x0034
-#define OMAP4430_CM_DIV_M3_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0034)
-#define OMAP4_CM_DIV_M4_DPLL_CORE_OFFSET		0x0038
-#define OMAP4430_CM_DIV_M4_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0038)
-#define OMAP4_CM_DIV_M5_DPLL_CORE_OFFSET		0x003c
-#define OMAP4430_CM_DIV_M5_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x003c)
-#define OMAP4_CM_DIV_M6_DPLL_CORE_OFFSET		0x0040
-#define OMAP4430_CM_DIV_M6_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0040)
-#define OMAP4_CM_DIV_M7_DPLL_CORE_OFFSET		0x0044
-#define OMAP4430_CM_DIV_M7_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0044)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET	0x0048
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0048)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET	0x004c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x004c)
-#define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET		0x0050
-#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0050)
-#define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET		0x0060
-#define OMAP4430_CM_CLKMODE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0060)
-#define OMAP4_CM_IDLEST_DPLL_MPU_OFFSET			0x0064
-#define OMAP4430_CM_IDLEST_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0064)
-#define OMAP4_CM_AUTOIDLE_DPLL_MPU_OFFSET		0x0068
-#define OMAP4430_CM_AUTOIDLE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0068)
-#define OMAP4_CM_CLKSEL_DPLL_MPU_OFFSET			0x006c
-#define OMAP4430_CM_CLKSEL_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x006c)
-#define OMAP4_CM_DIV_M2_DPLL_MPU_OFFSET			0x0070
-#define OMAP4430_CM_DIV_M2_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0070)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET		0x0088
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0088)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET		0x008c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x008c)
-#define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET			0x009c
-#define OMAP4430_CM_BYPCLK_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x009c)
-#define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET		0x00a0
-#define OMAP4430_CM_CLKMODE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a0)
-#define OMAP4_CM_IDLEST_DPLL_IVA_OFFSET			0x00a4
-#define OMAP4430_CM_IDLEST_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a4)
-#define OMAP4_CM_AUTOIDLE_DPLL_IVA_OFFSET		0x00a8
-#define OMAP4430_CM_AUTOIDLE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a8)
-#define OMAP4_CM_CLKSEL_DPLL_IVA_OFFSET			0x00ac
-#define OMAP4430_CM_CLKSEL_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ac)
-#define OMAP4_CM_DIV_M4_DPLL_IVA_OFFSET			0x00b8
-#define OMAP4430_CM_DIV_M4_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00b8)
-#define OMAP4_CM_DIV_M5_DPLL_IVA_OFFSET			0x00bc
-#define OMAP4430_CM_DIV_M5_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00bc)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET		0x00c8
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00c8)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET		0x00cc
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00cc)
-#define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET			0x00dc
-#define OMAP4430_CM_BYPCLK_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00dc)
-#define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET		0x00e0
-#define OMAP4430_CM_CLKMODE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e0)
-#define OMAP4_CM_IDLEST_DPLL_ABE_OFFSET			0x00e4
-#define OMAP4430_CM_IDLEST_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e4)
-#define OMAP4_CM_AUTOIDLE_DPLL_ABE_OFFSET		0x00e8
-#define OMAP4430_CM_AUTOIDLE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e8)
-#define OMAP4_CM_CLKSEL_DPLL_ABE_OFFSET			0x00ec
-#define OMAP4430_CM_CLKSEL_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ec)
-#define OMAP4_CM_DIV_M2_DPLL_ABE_OFFSET			0x00f0
-#define OMAP4430_CM_DIV_M2_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f0)
-#define OMAP4_CM_DIV_M3_DPLL_ABE_OFFSET			0x00f4
-#define OMAP4430_CM_DIV_M3_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f4)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET		0x0108
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0108)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET		0x010c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x010c)
-#define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET		0x0120
-#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0120)
-#define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET		0x0124
-#define OMAP4430_CM_IDLEST_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0124)
-#define OMAP4_CM_AUTOIDLE_DPLL_DDRPHY_OFFSET		0x0128
-#define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0128)
-#define OMAP4_CM_CLKSEL_DPLL_DDRPHY_OFFSET		0x012c
-#define OMAP4430_CM_CLKSEL_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x012c)
-#define OMAP4_CM_DIV_M2_DPLL_DDRPHY_OFFSET		0x0130
-#define OMAP4430_CM_DIV_M2_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0130)
-#define OMAP4_CM_DIV_M4_DPLL_DDRPHY_OFFSET		0x0138
-#define OMAP4430_CM_DIV_M4_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0138)
-#define OMAP4_CM_DIV_M5_DPLL_DDRPHY_OFFSET		0x013c
-#define OMAP4430_CM_DIV_M5_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x013c)
-#define OMAP4_CM_DIV_M6_DPLL_DDRPHY_OFFSET		0x0140
-#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0140)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET	0x0148
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0148)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET	0x014c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x014c)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET		0x0160
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG1			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0160)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET		0x0164
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG2			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0164)
-#define OMAP4_CM_DYN_DEP_PRESCAL_OFFSET			0x0170
-#define OMAP4430_CM_DYN_DEP_PRESCAL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0170)
-#define OMAP4_CM_RESTORE_ST_OFFSET			0x0180
-#define OMAP4430_CM_RESTORE_ST				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0180)
-
-/* CM1.MPU_CM1 register offsets */
-#define OMAP4_CM_MPU_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_MPU_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0000)
-#define OMAP4_CM_MPU_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_MPU_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0004)
-#define OMAP4_CM_MPU_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_MPU_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0008)
-#define OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_MPU_MPU_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0020)
-
-/* CM1.TESLA_CM1 register offsets */
-#define OMAP4_CM_TESLA_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_TESLA_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0000)
-#define OMAP4_CM_TESLA_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_TESLA_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0004)
-#define OMAP4_CM_TESLA_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_TESLA_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0008)
-#define OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_TESLA_TESLA_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0020)
-
-/* CM1.ABE_CM1 register offsets */
-#define OMAP4_CM1_ABE_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM1_ABE_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0000)
-#define OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM1_ABE_L4ABE_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0020)
-#define OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM1_ABE_AESS_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0028)
-#define OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM1_ABE_PDM_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0030)
-#define OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM1_ABE_DMIC_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0038)
-#define OMAP4_CM1_ABE_MCASP_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM1_ABE_MCASP_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0040)
-#define OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET		0x0048
-#define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0048)
-#define OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET		0x0050
-#define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0050)
-#define OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0058)
-#define OMAP4_CM1_ABE_SLIMBUS_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0060)
-#define OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET		0x0068
-#define OMAP4430_CM1_ABE_TIMER5_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0068)
-#define OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET		0x0070
-#define OMAP4430_CM1_ABE_TIMER6_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0070)
-#define OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM1_ABE_TIMER7_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0078)
-#define OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM1_ABE_TIMER8_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0080)
-#define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088)
-
-/* CM1.RESTORE_CM1 register offsets */
-#define OMAP4_CM_CLKSEL_CORE_RESTORE_OFFSET		0x0000
-#define OMAP4430_CM_CLKSEL_CORE_RESTORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000)
-#define OMAP4_CM_DIV_M2_DPLL_CORE_RESTORE_OFFSET	0x0004
-#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004)
-#define OMAP4_CM_DIV_M3_DPLL_CORE_RESTORE_OFFSET	0x0008
-#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008)
-#define OMAP4_CM_DIV_M4_DPLL_CORE_RESTORE_OFFSET	0x000c
-#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c)
-#define OMAP4_CM_DIV_M5_DPLL_CORE_RESTORE_OFFSET	0x0010
-#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010)
-#define OMAP4_CM_DIV_M6_DPLL_CORE_RESTORE_OFFSET	0x0014
-#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014)
-#define OMAP4_CM_DIV_M7_DPLL_CORE_RESTORE_OFFSET	0x0018
-#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018)
-#define OMAP4_CM_CLKSEL_DPLL_CORE_RESTORE_OFFSET	0x001c
-#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE_OFFSET	0x0020
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE_OFFSET	0x0024
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024)
-#define OMAP4_CM_CLKMODE_DPLL_CORE_RESTORE_OFFSET	0x0028
-#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG2_RESTORE_OFFSET	0x002c
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG2_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c)
-#define OMAP4_CM_SHADOW_FREQ_CONFIG1_RESTORE_OFFSET	0x0030
-#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030)
-#define OMAP4_CM_AUTOIDLE_DPLL_CORE_RESTORE_OFFSET	0x0034
-#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034)
-#define OMAP4_CM_MPU_CLKSTCTRL_RESTORE_OFFSET		0x0038
-#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0038)
-#define OMAP4_CM_CM1_PROFILING_CLKCTRL_RESTORE_OFFSET	0x003c
-#define OMAP4430_CM_CM1_PROFILING_CLKCTRL_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x003c)
-#define OMAP4_CM_DYN_DEP_PRESCAL_RESTORE_OFFSET		0x0040
-#define OMAP4430_CM_DYN_DEP_PRESCAL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0040)
-
-/* CM2 */
-
-/* CM2.OCP_SOCKET_CM2 register offsets */
-#define OMAP4_REVISION_CM2_OFFSET			0x0000
-#define OMAP4430_REVISION_CM2				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0000)
-#define OMAP4_CM_CM2_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_CM2_PROFILING_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0040)
-
-/* CM2.CKGEN_CM2 register offsets */
-#define OMAP4_CM_CLKSEL_DUCATI_ISS_ROOT_OFFSET		0x0000
-#define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0000)
-#define OMAP4_CM_CLKSEL_USB_60MHZ_OFFSET		0x0004
-#define OMAP4430_CM_CLKSEL_USB_60MHZ			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0004)
-#define OMAP4_CM_SCALE_FCLK_OFFSET			0x0008
-#define OMAP4430_CM_SCALE_FCLK				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0008)
-#define OMAP4_CM_CORE_DVFS_PERF1_OFFSET			0x0010
-#define OMAP4430_CM_CORE_DVFS_PERF1			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0010)
-#define OMAP4_CM_CORE_DVFS_PERF2_OFFSET			0x0014
-#define OMAP4430_CM_CORE_DVFS_PERF2			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0014)
-#define OMAP4_CM_CORE_DVFS_PERF3_OFFSET			0x0018
-#define OMAP4430_CM_CORE_DVFS_PERF3			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0018)
-#define OMAP4_CM_CORE_DVFS_PERF4_OFFSET			0x001c
-#define OMAP4430_CM_CORE_DVFS_PERF4			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x001c)
-#define OMAP4_CM_CORE_DVFS_CURRENT_OFFSET		0x0024
-#define OMAP4430_CM_CORE_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0024)
-#define OMAP4_CM_IVA_DVFS_PERF_TESLA_OFFSET		0x0028
-#define OMAP4430_CM_IVA_DVFS_PERF_TESLA			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0028)
-#define OMAP4_CM_IVA_DVFS_PERF_IVAHD_OFFSET		0x002c
-#define OMAP4430_CM_IVA_DVFS_PERF_IVAHD			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x002c)
-#define OMAP4_CM_IVA_DVFS_PERF_ABE_OFFSET		0x0030
-#define OMAP4430_CM_IVA_DVFS_PERF_ABE			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0030)
-#define OMAP4_CM_IVA_DVFS_CURRENT_OFFSET		0x0038
-#define OMAP4430_CM_IVA_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0038)
-#define OMAP4_CM_CLKMODE_DPLL_PER_OFFSET		0x0040
-#define OMAP4430_CM_CLKMODE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0040)
-#define OMAP4_CM_IDLEST_DPLL_PER_OFFSET			0x0044
-#define OMAP4430_CM_IDLEST_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0044)
-#define OMAP4_CM_AUTOIDLE_DPLL_PER_OFFSET		0x0048
-#define OMAP4430_CM_AUTOIDLE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0048)
-#define OMAP4_CM_CLKSEL_DPLL_PER_OFFSET			0x004c
-#define OMAP4430_CM_CLKSEL_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x004c)
-#define OMAP4_CM_DIV_M2_DPLL_PER_OFFSET			0x0050
-#define OMAP4430_CM_DIV_M2_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0050)
-#define OMAP4_CM_DIV_M3_DPLL_PER_OFFSET			0x0054
-#define OMAP4430_CM_DIV_M3_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0054)
-#define OMAP4_CM_DIV_M4_DPLL_PER_OFFSET			0x0058
-#define OMAP4430_CM_DIV_M4_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0058)
-#define OMAP4_CM_DIV_M5_DPLL_PER_OFFSET			0x005c
-#define OMAP4430_CM_DIV_M5_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x005c)
-#define OMAP4_CM_DIV_M6_DPLL_PER_OFFSET			0x0060
-#define OMAP4430_CM_DIV_M6_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0060)
-#define OMAP4_CM_DIV_M7_DPLL_PER_OFFSET			0x0064
-#define OMAP4430_CM_DIV_M7_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0064)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET		0x0068
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET		0x006c
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c)
-#define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET		0x0080
-#define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080)
-#define OMAP4_CM_IDLEST_DPLL_USB_OFFSET			0x0084
-#define OMAP4430_CM_IDLEST_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0084)
-#define OMAP4_CM_AUTOIDLE_DPLL_USB_OFFSET		0x0088
-#define OMAP4430_CM_AUTOIDLE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0088)
-#define OMAP4_CM_CLKSEL_DPLL_USB_OFFSET			0x008c
-#define OMAP4430_CM_CLKSEL_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x008c)
-#define OMAP4_CM_DIV_M2_DPLL_USB_OFFSET			0x0090
-#define OMAP4430_CM_DIV_M2_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0090)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET		0x00a8
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00a8)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET		0x00ac
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ac)
-#define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET		0x00b4
-#define OMAP4430_CM_CLKDCOLDO_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00b4)
-#define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET		0x00c0
-#define OMAP4430_CM_CLKMODE_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c0)
-#define OMAP4_CM_IDLEST_DPLL_UNIPRO_OFFSET		0x00c4
-#define OMAP4430_CM_IDLEST_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c4)
-#define OMAP4_CM_AUTOIDLE_DPLL_UNIPRO_OFFSET		0x00c8
-#define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c8)
-#define OMAP4_CM_CLKSEL_DPLL_UNIPRO_OFFSET		0x00cc
-#define OMAP4430_CM_CLKSEL_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00cc)
-#define OMAP4_CM_DIV_M2_DPLL_UNIPRO_OFFSET		0x00d0
-#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00d0)
-#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET	0x00e8
-#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00e8)
-#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET	0x00ec
-#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ec)
-
-/* CM2.ALWAYS_ON_CM2 register offsets */
-#define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_ALWON_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0000)
-#define OMAP4_CM_ALWON_MDMINTC_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0020)
-#define OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0028)
-#define OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030)
-#define OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038)
-#define OMAP4_CM_ALWON_USBPHY_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_ALWON_USBPHY_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0040)
-
-/* CM2.CORE_CM2 register offsets */
-#define OMAP4_CM_L3_1_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_L3_1_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0000)
-#define OMAP4_CM_L3_1_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_L3_1_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0008)
-#define OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_L3_1_L3_1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0020)
-#define OMAP4_CM_L3_2_CLKSTCTRL_OFFSET			0x0100
-#define OMAP4430_CM_L3_2_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0100)
-#define OMAP4_CM_L3_2_DYNAMICDEP_OFFSET			0x0108
-#define OMAP4430_CM_L3_2_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0108)
-#define OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET		0x0120
-#define OMAP4430_CM_L3_2_L3_2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0120)
-#define OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET		0x0128
-#define OMAP4430_CM_L3_2_GPMC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0128)
-#define OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET		0x0130
-#define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0130)
-#define OMAP4_CM_DUCATI_CLKSTCTRL_OFFSET		0x0200
-#define OMAP4430_CM_DUCATI_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0200)
-#define OMAP4_CM_DUCATI_STATICDEP_OFFSET		0x0204
-#define OMAP4430_CM_DUCATI_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0204)
-#define OMAP4_CM_DUCATI_DYNAMICDEP_OFFSET		0x0208
-#define OMAP4430_CM_DUCATI_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0208)
-#define OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET		0x0220
-#define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0220)
-#define OMAP4_CM_SDMA_CLKSTCTRL_OFFSET			0x0300
-#define OMAP4430_CM_SDMA_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0300)
-#define OMAP4_CM_SDMA_STATICDEP_OFFSET			0x0304
-#define OMAP4430_CM_SDMA_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0304)
-#define OMAP4_CM_SDMA_DYNAMICDEP_OFFSET			0x0308
-#define OMAP4430_CM_SDMA_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0308)
-#define OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET		0x0320
-#define OMAP4430_CM_SDMA_SDMA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0320)
-#define OMAP4_CM_MEMIF_CLKSTCTRL_OFFSET			0x0400
-#define OMAP4430_CM_MEMIF_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0400)
-#define OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET		0x0420
-#define OMAP4430_CM_MEMIF_DMM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0420)
-#define OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET		0x0428
-#define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0428)
-#define OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET		0x0430
-#define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0430)
-#define OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET		0x0438
-#define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0438)
-#define OMAP4_CM_MEMIF_DLL_CLKCTRL_OFFSET		0x0440
-#define OMAP4430_CM_MEMIF_DLL_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0440)
-#define OMAP4_CM_MEMIF_EMIF_H1_CLKCTRL_OFFSET		0x0450
-#define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0450)
-#define OMAP4_CM_MEMIF_EMIF_H2_CLKCTRL_OFFSET		0x0458
-#define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0458)
-#define OMAP4_CM_MEMIF_DLL_H_CLKCTRL_OFFSET		0x0460
-#define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0460)
-#define OMAP4_CM_D2D_CLKSTCTRL_OFFSET			0x0500
-#define OMAP4430_CM_D2D_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0500)
-#define OMAP4_CM_D2D_STATICDEP_OFFSET			0x0504
-#define OMAP4430_CM_D2D_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0504)
-#define OMAP4_CM_D2D_DYNAMICDEP_OFFSET			0x0508
-#define OMAP4430_CM_D2D_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0508)
-#define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET		0x0520
-#define OMAP4430_CM_D2D_SAD2D_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0520)
-#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET		0x0528
-#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0528)
-#define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET		0x0530
-#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0530)
-#define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET			0x0600
-#define OMAP4430_CM_L4CFG_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0600)
-#define OMAP4_CM_L4CFG_DYNAMICDEP_OFFSET		0x0608
-#define OMAP4430_CM_L4CFG_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0608)
-#define OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET		0x0620
-#define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0620)
-#define OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET		0x0628
-#define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0628)
-#define OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET		0x0630
-#define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0630)
-#define OMAP4_CM_L4CFG_SAR_ROM_CLKCTRL_OFFSET		0x0638
-#define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0638)
-#define OMAP4_CM_L3INSTR_CLKSTCTRL_OFFSET		0x0700
-#define OMAP4430_CM_L3INSTR_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0700)
-#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET		0x0720
-#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0720)
-#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET	0x0728
-#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0728)
-#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET		0x0740
-#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0740)
-
-/* CM2.IVAHD_CM2 register offsets */
-#define OMAP4_CM_IVAHD_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_IVAHD_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0000)
-#define OMAP4_CM_IVAHD_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_IVAHD_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0004)
-#define OMAP4_CM_IVAHD_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_IVAHD_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0008)
-#define OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0020)
-#define OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_IVAHD_SL2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0028)
-
-/* CM2.CAM_CM2 register offsets */
-#define OMAP4_CM_CAM_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_CAM_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0000)
-#define OMAP4_CM_CAM_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_CAM_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0004)
-#define OMAP4_CM_CAM_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_CAM_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0008)
-#define OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_CAM_ISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0020)
-#define OMAP4_CM_CAM_FDIF_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_CAM_FDIF_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0028)
-
-/* CM2.DSS_CM2 register offsets */
-#define OMAP4_CM_DSS_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_DSS_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0000)
-#define OMAP4_CM_DSS_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_DSS_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0004)
-#define OMAP4_CM_DSS_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_DSS_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0008)
-#define OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_DSS_DSS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0020)
-#define OMAP4_CM_DSS_DEISS_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_DSS_DEISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0028)
 
-/* CM2.GFX_CM2 register offsets */
-#define OMAP4_CM_GFX_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_GFX_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0000)
-#define OMAP4_CM_GFX_STATICDEP_OFFSET			0x0004
-#define OMAP4430_CM_GFX_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0004)
-#define OMAP4_CM_GFX_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_GFX_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0008)
-#define OMAP4_CM_GFX_GFX_CLKCTRL_OFFSET			0x0020
-#define OMAP4430_CM_GFX_GFX_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0020)
+#include "prcm-common.h"
+#include "cm.h"
 
-/* CM2.L3INIT_CM2 register offsets */
-#define OMAP4_CM_L3INIT_CLKSTCTRL_OFFSET		0x0000
-#define OMAP4430_CM_L3INIT_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0000)
-#define OMAP4_CM_L3INIT_STATICDEP_OFFSET		0x0004
-#define OMAP4430_CM_L3INIT_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0004)
-#define OMAP4_CM_L3INIT_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_L3INIT_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0008)
-#define OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_L3INIT_MMC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0028)
-#define OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_L3INIT_MMC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0030)
-#define OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_L3INIT_HSI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0038)
-#define OMAP4_CM_L3INIT_UNIPRO1_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0040)
-#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0058)
-#define OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0060)
-#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET		0x0068
-#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0068)
-#define OMAP4_CM_L3INIT_P1500_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM_L3INIT_P1500_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0078)
-#define OMAP4_CM_L3INIT_EMAC_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM_L3INIT_EMAC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0080)
-#define OMAP4_CM_L3INIT_SATA_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM_L3INIT_SATA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0088)
-#define OMAP4_CM_L3INIT_TPPSS_CLKCTRL_OFFSET		0x0090
-#define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0090)
-#define OMAP4_CM_L3INIT_PCIESS_CLKCTRL_OFFSET		0x0098
-#define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0098)
-#define OMAP4_CM_L3INIT_CCPTX_CLKCTRL_OFFSET		0x00a8
-#define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00a8)
-#define OMAP4_CM_L3INIT_XHPI_CLKCTRL_OFFSET		0x00c0
-#define OMAP4430_CM_L3INIT_XHPI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c0)
-#define OMAP4_CM_L3INIT_MMC6_CLKCTRL_OFFSET		0x00c8
-#define OMAP4430_CM_L3INIT_MMC6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c8)
-#define OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET	0x00d0
-#define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00d0)
-#define OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET	0x00e0
-#define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00e0)
+#define OMAP4_CM_CLKSTCTRL				0x0000
 
-/* CM2.L4PER_CM2 register offsets */
-#define OMAP4_CM_L4PER_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_L4PER_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0000)
-#define OMAP4_CM_L4PER_DYNAMICDEP_OFFSET		0x0008
-#define OMAP4430_CM_L4PER_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0008)
-#define OMAP4_CM_L4PER_ADC_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_L4PER_ADC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0020)
-#define OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0028)
-#define OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0030)
-#define OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0038)
-#define OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0040)
-#define OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET		0x0048
-#define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0048)
-#define OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET		0x0050
-#define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0050)
-#define OMAP4_CM_L4PER_ELM_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM_L4PER_ELM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0058)
-#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0060)
-#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET		0x0068
-#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0068)
-#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET		0x0070
-#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0070)
-#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0078)
-#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0080)
-#define OMAP4_CM_L4PER_HDQ1W_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0088)
-#define OMAP4_CM_L4PER_HECC1_CLKCTRL_OFFSET		0x0090
-#define OMAP4430_CM_L4PER_HECC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0090)
-#define OMAP4_CM_L4PER_HECC2_CLKCTRL_OFFSET		0x0098
-#define OMAP4430_CM_L4PER_HECC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0098)
-#define OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET		0x00a0
-#define OMAP4430_CM_L4PER_I2C1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a0)
-#define OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET		0x00a8
-#define OMAP4430_CM_L4PER_I2C2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a8)
-#define OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET		0x00b0
-#define OMAP4430_CM_L4PER_I2C3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b0)
-#define OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET		0x00b8
-#define OMAP4430_CM_L4PER_I2C4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b8)
-#define OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET		0x00c0
-#define OMAP4430_CM_L4PER_L4PER_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00c0)
-#define OMAP4_CM_L4PER_MCASP2_CLKCTRL_OFFSET		0x00d0
-#define OMAP4430_CM_L4PER_MCASP2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d0)
-#define OMAP4_CM_L4PER_MCASP3_CLKCTRL_OFFSET		0x00d8
-#define OMAP4430_CM_L4PER_MCASP3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d8)
-#define OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET		0x00e0
-#define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e0)
-#define OMAP4_CM_L4PER_MGATE_CLKCTRL_OFFSET		0x00e8
-#define OMAP4430_CM_L4PER_MGATE_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e8)
-#define OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET		0x00f0
-#define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f0)
-#define OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET		0x00f8
-#define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f8)
-#define OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET		0x0100
-#define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0100)
-#define OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET		0x0108
-#define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0108)
-#define OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET		0x0120
-#define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0120)
-#define OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET		0x0128
-#define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0128)
-#define OMAP4_CM_L4PER_MSPROHG_CLKCTRL_OFFSET		0x0130
-#define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0130)
-#define OMAP4_CM_L4PER_SLIMBUS2_CLKCTRL_OFFSET		0x0138
-#define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0138)
-#define OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET		0x0140
-#define OMAP4430_CM_L4PER_UART1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0140)
-#define OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET		0x0148
-#define OMAP4430_CM_L4PER_UART2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0148)
-#define OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET		0x0150
-#define OMAP4430_CM_L4PER_UART3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0150)
-#define OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET		0x0158
-#define OMAP4430_CM_L4PER_UART4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0158)
-#define OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET		0x0160
-#define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0160)
-#define OMAP4_CM_L4PER_I2C5_CLKCTRL_OFFSET		0x0168
-#define OMAP4430_CM_L4PER_I2C5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0168)
-#define OMAP4_CM_L4SEC_CLKSTCTRL_OFFSET			0x0180
-#define OMAP4430_CM_L4SEC_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0180)
-#define OMAP4_CM_L4SEC_STATICDEP_OFFSET			0x0184
-#define OMAP4430_CM_L4SEC_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0184)
-#define OMAP4_CM_L4SEC_DYNAMICDEP_OFFSET		0x0188
-#define OMAP4430_CM_L4SEC_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0188)
-#define OMAP4_CM_L4SEC_AES1_CLKCTRL_OFFSET		0x01a0
-#define OMAP4430_CM_L4SEC_AES1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a0)
-#define OMAP4_CM_L4SEC_AES2_CLKCTRL_OFFSET		0x01a8
-#define OMAP4430_CM_L4SEC_AES2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a8)
-#define OMAP4_CM_L4SEC_DES3DES_CLKCTRL_OFFSET		0x01b0
-#define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b0)
-#define OMAP4_CM_L4SEC_PKAEIP29_CLKCTRL_OFFSET		0x01b8
-#define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b8)
-#define OMAP4_CM_L4SEC_RNG_CLKCTRL_OFFSET		0x01c0
-#define OMAP4430_CM_L4SEC_RNG_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c0)
-#define OMAP4_CM_L4SEC_SHA2MD51_CLKCTRL_OFFSET		0x01c8
-#define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c8)
-#define OMAP4_CM_L4SEC_CRYPTODMA_CLKCTRL_OFFSET		0x01d8
-#define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01d8)
+/* Function prototypes */
+# ifndef __ASSEMBLER__
 
-/* CM2.CEFUSE_CM2 register offsets */
-#define OMAP4_CM_CEFUSE_CLKSTCTRL_OFFSET		0x0000
-#define OMAP4430_CM_CEFUSE_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000)
-#define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020)
+extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
 
-/* CM2.RESTORE_CM2 register offsets */
-#define OMAP4_CM_L3_1_CLKSTCTRL_RESTORE_OFFSET		0x0000
-#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000)
-#define OMAP4_CM_L3_2_CLKSTCTRL_RESTORE_OFFSET		0x0004
-#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004)
-#define OMAP4_CM_L4CFG_CLKSTCTRL_RESTORE_OFFSET		0x0008
-#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008)
-#define OMAP4_CM_MEMIF_CLKSTCTRL_RESTORE_OFFSET		0x000c
-#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c)
-#define OMAP4_CM_L4PER_CLKSTCTRL_RESTORE_OFFSET		0x0010
-#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010)
-#define OMAP4_CM_L3INIT_CLKSTCTRL_RESTORE_OFFSET	0x0014
-#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014)
-#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_RESTORE_OFFSET	0x0018
-#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018)
-#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE_OFFSET	0x001c
-#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c)
-#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE_OFFSET	0x0020
-#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020)
-#define OMAP4_CM_CM2_PROFILING_CLKCTRL_RESTORE_OFFSET	0x0024
-#define OMAP4430_CM_CM2_PROFILING_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024)
-#define OMAP4_CM_D2D_STATICDEP_RESTORE_OFFSET		0x0028
-#define OMAP4430_CM_D2D_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028)
-#define OMAP4_CM_L3_1_DYNAMICDEP_RESTORE_OFFSET		0x002c
-#define OMAP4430_CM_L3_1_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c)
-#define OMAP4_CM_L3_2_DYNAMICDEP_RESTORE_OFFSET		0x0030
-#define OMAP4430_CM_L3_2_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030)
-#define OMAP4_CM_D2D_DYNAMICDEP_RESTORE_OFFSET		0x0034
-#define OMAP4430_CM_D2D_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034)
-#define OMAP4_CM_L4CFG_DYNAMICDEP_RESTORE_OFFSET	0x0038
-#define OMAP4430_CM_L4CFG_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038)
-#define OMAP4_CM_L4PER_DYNAMICDEP_RESTORE_OFFSET	0x003c
-#define OMAP4430_CM_L4PER_DYNAMICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c)
-#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_RESTORE_OFFSET	0x0040
-#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040)
-#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_RESTORE_OFFSET	0x0044
-#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0044)
-#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_RESTORE_OFFSET	0x0048
-#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0048)
-#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_RESTORE_OFFSET	0x004c
-#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x004c)
-#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_RESTORE_OFFSET	0x0050
-#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0050)
-#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE_OFFSET	0x0054
-#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0054)
-#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE_OFFSET	0x0058
-#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0058)
-#define OMAP4_CM_SDMA_STATICDEP_RESTORE_OFFSET		0x005c
-#define OMAP4430_CM_SDMA_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x005c)
+# endif
 #endif
diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
deleted file mode 100644
index f8a660a1a4a..00000000000
--- a/arch/arm/mach-omap2/cm4xxx.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * OMAP4 CM module functions
- *
- * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/atomic.h>
-
-#include <plat/common.h>
-
-#include "cm.h"
-#include "cm-regbits-44xx.h"
-
-/**
- * omap4_cm_wait_module_ready - wait for a module to be in 'func' state
- * @clkctrl_reg: CLKCTRL module address
- *
- * Wait for the module IDLEST to be functional. If the idle state is in any
- * the non functional state (trans, idle or disabled), module and thus the
- * sysconfig cannot be accessed and will probably lead to an "imprecise
- * external abort"
- *
- * Module idle state:
- *   0x0 func:     Module is fully functional, including OCP
- *   0x1 trans:    Module is performing transition: wakeup, or sleep, or sleep
- *                 abortion
- *   0x2 idle:     Module is in Idle mode (only OCP part). It is functional if
- *                 using separate functional clock
- *   0x3 disabled: Module is disabled and cannot be accessed
- *
- */
-int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg)
-{
-	int i = 0;
-
-	if (!clkctrl_reg)
-		return 0;
-
-	omap_test_timeout((
-		((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) == 0) ||
-		 (((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) >>
-		  OMAP4430_IDLEST_SHIFT) == 0x2)),
-		MAX_MODULE_READY_TIME, i);
-
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
-}
-
diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c
new file mode 100644
index 00000000000..c04bbbea17a
--- /dev/null
+++ b/arch/arm/mach-omap2/cminst44xx.c
@@ -0,0 +1,214 @@
+/*
+ * OMAP4 CM instance functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This is needed since CM instances can be in the PRM, PRCM_MPU, CM1,
+ * or CM2 hardware modules.  For example, the EMU_CM CM instance is in
+ * the PRM hardware module.  What a mess...
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "cm.h"
+#include "cm1_44xx.h"
+#include "cm2_44xx.h"
+#include "cm44xx.h"
+#include "cminst44xx.h"
+#include "cm-regbits-34xx.h"
+#include "cm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "prm44xx.h"
+#include "prcm_mpu44xx.h"
+
+static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
+	[OMAP4430_INVALID_PRCM_PARTITION]	= 0,
+	[OMAP4430_PRM_PARTITION]		= OMAP4430_PRM_BASE,
+	[OMAP4430_CM1_PARTITION]		= OMAP4430_CM1_BASE,
+	[OMAP4430_CM2_PARTITION]		= OMAP4430_CM2_BASE,
+	[OMAP4430_SCRM_PARTITION]		= 0,
+	[OMAP4430_PRCM_MPU_PARTITION]		= OMAP4430_PRCM_MPU_BASE,
+};
+
+/* Read a register in a CM instance */
+u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx)
+{
+	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
+	       part == OMAP4430_INVALID_PRCM_PARTITION ||
+	       !_cm_bases[part]);
+	return __raw_readl(OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx));
+}
+
+/* Write into a register in a CM instance */
+void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
+{
+	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
+	       part == OMAP4430_INVALID_PRCM_PARTITION ||
+	       !_cm_bases[part]);
+	__raw_writel(val, OMAP2_L4_IO_ADDRESS(_cm_bases[part] + inst + idx));
+}
+
+/* Read-modify-write a register in CM1. Caller must lock */
+u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
+				   s16 idx)
+{
+	u32 v;
+
+	v = omap4_cminst_read_inst_reg(part, inst, idx);
+	v &= ~mask;
+	v |= bits;
+	omap4_cminst_write_inst_reg(v, part, inst, idx);
+
+	return v;
+}
+
+/*
+ *
+ */
+
+/**
+ * _clktrctrl_write - write @c to a CM_CLKSTCTRL.CLKTRCTRL register bitfield
+ * @c: CLKTRCTRL register bitfield (LSB = bit 0, i.e., unshifted)
+ * @part: PRCM partition ID that the CM_CLKSTCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * @c must be the unshifted value for CLKTRCTRL - i.e., this function
+ * will handle the shift itself.
+ */
+static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs)
+{
+	u32 v;
+
+	v = omap4_cminst_read_inst_reg(part, inst, cdoffs + OMAP4_CM_CLKSTCTRL);
+	v &= ~OMAP4430_CLKTRCTRL_MASK;
+	v |= c << OMAP4430_CLKTRCTRL_SHIFT;
+	omap4_cminst_write_inst_reg(v, part, inst, cdoffs + OMAP4_CM_CLKSTCTRL);
+}
+
+/**
+ * omap4_cminst_is_clkdm_in_hwsup - is a clockdomain in hwsup idle mode?
+ * @part: PRCM partition ID that the CM_CLKSTCTRL register exists in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Returns true if the clockdomain referred to by (@part, @inst, @cdoffs)
+ * is in hardware-supervised idle mode, or 0 otherwise.
+ */
+bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs)
+{
+	u32 v;
+
+	v = omap4_cminst_read_inst_reg(part, inst, cdoffs + OMAP4_CM_CLKSTCTRL);
+	v &= OMAP4430_CLKTRCTRL_MASK;
+	v >>= OMAP4430_CLKTRCTRL_SHIFT;
+
+	return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? true : false;
+}
+
+/**
+ * omap4_cminst_clkdm_enable_hwsup - put a clockdomain in hwsup-idle mode
+ * @part: PRCM partition ID that the clockdomain registers exist in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@part, @inst, @cdoffs) into
+ * hardware-supervised idle mode.  No return value.
+ */
+void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs)
+{
+	_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs);
+}
+
+/**
+ * omap4_cminst_clkdm_disable_hwsup - put a clockdomain in swsup-idle mode
+ * @part: PRCM partition ID that the clockdomain registers exist in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@part, @inst, @cdoffs) into
+ * software-supervised idle mode, i.e., controlled manually by the
+ * Linux OMAP clockdomain code.  No return value.
+ */
+void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs)
+{
+	_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
+}
+
+/**
+ * omap4_cminst_clkdm_force_sleep - try to put a clockdomain into idle
+ * @part: PRCM partition ID that the clockdomain registers exist in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Put a clockdomain referred to by (@part, @inst, @cdoffs) into idle
+ * No return value.
+ */
+void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs)
+{
+	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
+}
+
+/**
+ * omap4_cminst_clkdm_force_sleep - try to take a clockdomain out of idle
+ * @part: PRCM partition ID that the clockdomain registers exist in
+ * @inst: CM instance register offset (*_INST macro)
+ * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
+ *
+ * Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle,
+ * waking it up.  No return value.
+ */
+void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs)
+{
+	_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs);
+}
+
+/*
+ *
+ */
+
+/**
+ * omap4_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @clkctrl_reg: CLKCTRL module address
+ *
+ * Wait for the module IDLEST to be functional. If the idle state is in any
+ * the non functional state (trans, idle or disabled), module and thus the
+ * sysconfig cannot be accessed and will probably lead to an "imprecise
+ * external abort"
+ *
+ * Module idle state:
+ *   0x0 func:     Module is fully functional, including OCP
+ *   0x1 trans:    Module is performing transition: wakeup, or sleep, or sleep
+ *                 abortion
+ *   0x2 idle:     Module is in Idle mode (only OCP part). It is functional if
+ *                 using separate functional clock
+ *   0x3 disabled: Module is disabled and cannot be accessed
+ *
+ */
+int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg)
+{
+	int i = 0;
+
+	if (!clkctrl_reg)
+		return 0;
+
+	omap_test_timeout((
+		((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) == 0) ||
+		 (((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) >>
+		  OMAP4430_IDLEST_SHIFT) == 0x2)),
+		MAX_MODULE_READY_TIME, i);
+
+	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+}
+
diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h
new file mode 100644
index 00000000000..a6abd0a8cb8
--- /dev/null
+++ b/arch/arm/mach-omap2/cminst44xx.h
@@ -0,0 +1,31 @@
+/*
+ * OMAP4 Clock Management (CM) function prototypes
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
+#define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
+
+extern bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs);
+extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs);
+extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs);
+extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
+extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
+
+/*
+ * In an ideal world, we would not export these low-level functions,
+ * but this will probably take some time to fix properly
+ */
+extern u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx);
+extern void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
+extern u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
+					   s16 inst, s16 idx);
+
+extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg);
+
+#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 1fa3294b604..69527941902 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -20,12 +20,16 @@
 
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"
-#include "cm.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
 #include "sdrc.h"
 #include "pm.h"
 #include "control.h"
 
+/* Used by omap3_ctrl_save_padconf() */
+#define START_PADCONF_SAVE		0x2
+#define PADCONF_SAVE_DONE		0x1
+
 static void __iomem *omap2_ctrl_base;
 static void __iomem *omap4_ctrl_pad_base;
 
@@ -134,6 +138,7 @@ struct omap3_control_regs {
 	u32 sramldo4;
 	u32 sramldo5;
 	u32 csi;
+	u32 padconf_sys_nirq;
 };
 
 static struct omap3_control_regs control_context;
@@ -209,6 +214,37 @@ void omap4_ctrl_pad_writel(u32 val, u16 offset)
 	__raw_writel(val, OMAP4_CTRL_PAD_REGADDR(offset));
 }
 
+#ifdef CONFIG_ARCH_OMAP3
+
+/**
+ * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot
+ * @bootmode: 8-bit value to pass to some boot code
+ *
+ * Set the bootmode in the scratchpad RAM.  This is used after the
+ * system restarts.  Not sure what actually uses this - it may be the
+ * bootloader, rather than the boot ROM - contrary to the preserved
+ * comment below.  No return value.
+ */
+void omap3_ctrl_write_boot_mode(u8 bootmode)
+{
+	u32 l;
+
+	l = ('B' << 24) | ('M' << 16) | bootmode;
+
+	/*
+	 * Reserve the first word in scratchpad for communicating
+	 * with the boot ROM. A pointer to a data structure
+	 * describing the boot process can be stored there,
+	 * cf. OMAP34xx TRM, Initialization / Software Booting
+	 * Configuration.
+	 *
+	 * XXX This should use some omap_ctrl_writel()-type function
+	 */
+	__raw_writel(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
+}
+
+#endif
+
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 /*
  * Clears the scratchpad contents in case of cold boot-
@@ -220,13 +256,13 @@ void omap3_clear_scratchpad_contents(void)
 	void __iomem *v_addr;
 	u32 offset = 0;
 	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
-	if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
+	if (omap2_prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
 	    OMAP3430_GLOBAL_COLD_RST_MASK) {
 		for ( ; offset <= max_offset; offset += 0x4)
 			__raw_writel(0x0, (v_addr + offset));
-		prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
-				     OMAP3430_GR_MOD,
-				     OMAP3_PRM_RSTST_OFFSET);
+		omap2_prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST_MASK,
+					   OMAP3430_GR_MOD,
+					   OMAP3_PRM_RSTST_OFFSET);
 	}
 }
 
@@ -239,9 +275,19 @@ void omap3_save_scratchpad_contents(void)
 	struct omap3_scratchpad_prcm_block prcm_block_contents;
 	struct omap3_scratchpad_sdrc_block sdrc_block_contents;
 
-	/* Populate the Scratchpad contents */
+	/*
+	 * Populate the Scratchpad contents
+	 *
+	 * The "get_*restore_pointer" functions are used to provide a
+	 * physical restore address where the ROM code jumps while waking
+	 * up from MPU OFF/OSWR state.
+	 * The restore pointer is stored into the scratchpad.
+	 */
 	scratchpad_contents.boot_config_ptr = 0x0;
-	if (omap_rev() != OMAP3430_REV_ES3_0 &&
+	if (cpu_is_omap3630())
+		scratchpad_contents.public_restore_ptr =
+			virt_to_phys(get_omap3630_restore_pointer());
+	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
 					omap_rev() != OMAP3430_REV_ES3_1)
 		scratchpad_contents.public_restore_ptr =
 			virt_to_phys(get_restore_pointer());
@@ -258,32 +304,34 @@ void omap3_save_scratchpad_contents(void)
 	scratchpad_contents.sdrc_block_offset = 0x64;
 
 	/* Populate the PRCM block contents */
-	prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD,
-			OMAP3_PRM_CLKSRC_CTRL_OFFSET);
-	prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD,
-			OMAP3_PRM_CLKSEL_OFFSET);
+	prcm_block_contents.prm_clksrc_ctrl =
+		omap2_prm_read_mod_reg(OMAP3430_GR_MOD,
+				       OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+	prcm_block_contents.prm_clksel =
+		omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
+				       OMAP3_PRM_CLKSEL_OFFSET);
 	prcm_block_contents.cm_clksel_core =
-			cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
+			omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
 	prcm_block_contents.cm_clksel_wkup =
-			cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
+			omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
 	prcm_block_contents.cm_clken_pll =
-			cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+			omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
 	prcm_block_contents.cm_autoidle_pll =
-			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
 	prcm_block_contents.cm_clksel1_pll =
-			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
+			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
 	prcm_block_contents.cm_clksel2_pll =
-			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
+			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
 	prcm_block_contents.cm_clksel3_pll =
-			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
+			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
 	prcm_block_contents.cm_clken_pll_mpu =
-			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
+			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
 	prcm_block_contents.cm_autoidle_pll_mpu =
-			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
 	prcm_block_contents.cm_clksel1_pll_mpu =
-			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
+			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
 	prcm_block_contents.cm_clksel2_pll_mpu =
-			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
 	prcm_block_contents.prcm_block_size = 0x0;
 
 	/* Populate the SDRC block contents */
@@ -416,6 +464,8 @@ void omap3_control_save_context(void)
 	control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
 	control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
 	control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
+	control_context.padconf_sys_nirq =
+		omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
 	return;
 }
 
@@ -472,6 +522,43 @@ void omap3_control_restore_context(void)
 	omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
 	omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
 	omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
+	omap_ctrl_writel(control_context.padconf_sys_nirq,
+			 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
 	return;
 }
+
+void omap3630_ctrl_disable_rta(void)
+{
+	if (!cpu_is_omap3630())
+		return;
+	omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
+}
+
+/**
+ * omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM
+ *
+ * Tell the SCM to start saving the padconf registers, then wait for
+ * the process to complete.  Returns 0 unconditionally, although it
+ * should also eventually be able to return -ETIMEDOUT, if the save
+ * does not complete.
+ *
+ * XXX This function is missing a timeout.  What should it be?
+ */
+int omap3_ctrl_save_padconf(void)
+{
+	u32 cpo;
+
+	/* Save the padconf registers */
+	cpo = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
+	cpo |= START_PADCONF_SAVE;
+	omap_ctrl_writel(cpo, OMAP343X_CONTROL_PADCONF_OFF);
+
+	/* wait for the save to complete */
+	while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+		 & PADCONF_SAVE_DONE))
+		udelay(1);
+
+	return 0;
+}
+
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b6c6b7c450b..f0629ae0410 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -148,6 +148,15 @@
 #define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
 #define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_FUSE_OPP1_VDD1 (OMAP2_CONTROL_GENERAL + 0x0110)
+#define OMAP343X_CONTROL_FUSE_OPP2_VDD1 (OMAP2_CONTROL_GENERAL + 0x0114)
+#define OMAP343X_CONTROL_FUSE_OPP3_VDD1 (OMAP2_CONTROL_GENERAL + 0x0118)
+#define OMAP343X_CONTROL_FUSE_OPP4_VDD1 (OMAP2_CONTROL_GENERAL + 0x011c)
+#define OMAP343X_CONTROL_FUSE_OPP5_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120)
+#define OMAP343X_CONTROL_FUSE_OPP1_VDD2 (OMAP2_CONTROL_GENERAL + 0x0124)
+#define OMAP343X_CONTROL_FUSE_OPP2_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128)
+#define OMAP343X_CONTROL_FUSE_OPP3_VDD2 (OMAP2_CONTROL_GENERAL + 0x012c)
+#define OMAP343X_CONTROL_FUSE_SR        (OMAP2_CONTROL_GENERAL + 0x0130)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
 #define OMAP343X_CONTROL_DEBOBS(i)	(OMAP2_CONTROL_GENERAL + 0x01B0 \
@@ -164,6 +173,26 @@
 #define OMAP343X_CONTROL_SRAMLDO5	(OMAP2_CONTROL_GENERAL + 0x02C0)
 #define OMAP343X_CONTROL_CSI		(OMAP2_CONTROL_GENERAL + 0x02C4)
 
+/* OMAP3630 only CONTROL_GENERAL register offsets */
+#define OMAP3630_CONTROL_FUSE_OPP1G_VDD1        (OMAP2_CONTROL_GENERAL + 0x0110)
+#define OMAP3630_CONTROL_FUSE_OPP50_VDD1        (OMAP2_CONTROL_GENERAL + 0x0114)
+#define OMAP3630_CONTROL_FUSE_OPP100_VDD1       (OMAP2_CONTROL_GENERAL + 0x0118)
+#define OMAP3630_CONTROL_FUSE_OPP120_VDD1       (OMAP2_CONTROL_GENERAL + 0x0120)
+#define OMAP3630_CONTROL_FUSE_OPP50_VDD2        (OMAP2_CONTROL_GENERAL + 0x0128)
+#define OMAP3630_CONTROL_FUSE_OPP100_VDD2       (OMAP2_CONTROL_GENERAL + 0x012C)
+
+/* OMAP44xx control efuse offsets */
+#define OMAP44XX_CONTROL_FUSE_IVA_OPP50		0x22C
+#define OMAP44XX_CONTROL_FUSE_IVA_OPP100	0x22F
+#define OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO	0x232
+#define OMAP44XX_CONTROL_FUSE_IVA_OPPNITRO	0x235
+#define OMAP44XX_CONTROL_FUSE_MPU_OPP50		0x240
+#define OMAP44XX_CONTROL_FUSE_MPU_OPP100	0x243
+#define OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO	0x246
+#define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO	0x249
+#define OMAP44XX_CONTROL_FUSE_CORE_OPP50	0x254
+#define OMAP44XX_CONTROL_FUSE_CORE_OPP100	0x257
+
 /* AM35XX only CONTROL_GENERAL register offsets */
 #define AM35XX_CONTROL_MSUSPENDMUX_6    (OMAP2_CONTROL_GENERAL + 0x0038)
 #define AM35XX_CONTROL_DEVCONF2         (OMAP2_CONTROL_GENERAL + 0x0310)
@@ -204,6 +233,10 @@
 #define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
 #define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
 
+/* 36xx-only RTA - Retention till Accesss control registers and bits */
+#define OMAP36XX_CONTROL_MEM_RTA_CTRL	0x40C
+#define OMAP36XX_RTA_DISABLE		0x0
+
 /* 34xx D2D idle-related pins, handled by PM core */
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
 #define OMAP3_PADCONF_SAD2D_IDLEACK    0x254
@@ -270,6 +303,8 @@
 #define OMAP343X_SCRATCHPAD_ROM		(OMAP343X_CTRL_BASE + 0x860)
 #define OMAP343X_SCRATCHPAD		(OMAP343X_CTRL_BASE + 0x910)
 #define OMAP343X_SCRATCHPAD_ROM_OFFSET	0x19C
+#define OMAP343X_SCRATCHPAD_REGADDR(reg)	OMAP2_L4_IO_ADDRESS(\
+						OMAP343X_SCRATCHPAD + reg)
 
 /* AM35XX_CONTROL_IPSS_CLK_CTRL bits */
 #define AM35XX_USBOTG_VBUSP_CLK_SHIFT   0
@@ -309,7 +344,7 @@
 #define		FEAT_SGX_NONE		2
 
 #define OMAP3_IVA_SHIFT			12
-#define OMAP3_IVA_MASK			(1 << OMAP3_SGX_SHIFT)
+#define OMAP3_IVA_MASK			(1 << OMAP3_IVA_SHIFT)
 #define		FEAT_IVA		0
 #define		FEAT_IVA_NONE		1
 
@@ -347,10 +382,13 @@ extern void omap3_save_scratchpad_contents(void);
 extern void omap3_clear_scratchpad_contents(void);
 extern u32 *get_restore_pointer(void);
 extern u32 *get_es3_restore_pointer(void);
+extern u32 *get_omap3630_restore_pointer(void);
 extern u32 omap3_arm_context[128];
 extern void omap3_control_save_context(void);
 extern void omap3_control_restore_context(void);
-
+extern void omap3_ctrl_write_boot_mode(u8 bootmode);
+extern void omap3630_ctrl_disable_rta(void);
+extern int omap3_ctrl_save_padconf(void);
 #else
 #define omap_ctrl_base_get()		0
 #define omap_ctrl_readb(x)		0
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 0d50b45d041..f3e043fe5eb 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -27,8 +27,8 @@
 
 #include <plat/prcm.h>
 #include <plat/irqs.h>
-#include <plat/powerdomain.h>
-#include <plat/clockdomain.h>
+#include "powerdomain.h"
+#include "clockdomain.h"
 #include <plat/serial.h>
 
 #include "pm.h"
@@ -293,25 +293,26 @@ select_state:
 DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
 
 /**
- * omap3_cpuidle_update_states - Update the cpuidle states.
+ * omap3_cpuidle_update_states() - Update the cpuidle states
+ * @mpu_deepest_state:	Enable states upto and including this for mpu domain
+ * @core_deepest_state:	Enable states upto and including this for core domain
  *
- * Currently, this function toggles the validity of idle states based upon
- * the flag 'enable_off_mode'. When the flag is set all states are valid.
- * Else, states leading to OFF state set to be invalid.
+ * This goes through the list of states available and enables and disables the
+ * validity of C states based on deepest state that can be achieved for the
+ * variable domain
  */
-void omap3_cpuidle_update_states(void)
+void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state)
 {
 	int i;
 
 	for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
 		struct omap3_processor_cx *cx = &omap3_power_states[i];
 
-		if (enable_off_mode) {
+		if ((cx->mpu_state >= mpu_deepest_state) &&
+		    (cx->core_state >= core_deepest_state)) {
 			cx->valid = 1;
 		} else {
-			if ((cx->mpu_state == PWRDM_POWER_OFF) ||
-				(cx->core_state	== PWRDM_POWER_OFF))
-				cx->valid = 0;
+			cx->valid = 0;
 		}
 	}
 }
@@ -452,6 +453,18 @@ void omap_init_power_states(void)
 	omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
 	omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
 				CPUIDLE_FLAG_CHECK_BM;
+
+	/*
+	 * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
+	 * enable OFF mode in a stable form for previous revisions.
+	 * we disable C7 state as a result.
+	 */
+	if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) {
+		omap3_power_states[OMAP3_STATE_C7].valid = 0;
+		cpuidle_params_table[OMAP3_STATE_C7].valid = 0;
+		WARN_ONCE(1, "%s: core off state C7 disabled due to i583\n",
+				__func__);
+	}
 }
 
 struct cpuidle_driver omap3_idle_driver = {
@@ -504,7 +517,10 @@ int __init omap3_idle_init(void)
 		return -EINVAL;
 	dev->state_count = count;
 
-	omap3_cpuidle_update_states();
+	if (enable_off_mode)
+		omap3_cpuidle_update_states(PWRDM_POWER_OFF, PWRDM_POWER_OFF);
+	else
+		omap3_cpuidle_update_states(PWRDM_POWER_RET, PWRDM_POWER_RET);
 
 	if (cpuidle_register_device(dev)) {
 		printk(KERN_ERR "%s: CPUidle register device failed\n",
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5a0c148e23b..381f4eb9235 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -638,6 +638,7 @@ static struct platform_device dummy_pdev = {
 static void __init omap_hsmmc_reset(void)
 {
 	u32 i, nr_controllers;
+	struct clk *iclk, *fclk;
 
 	if (cpu_is_omap242x())
 		return;
@@ -647,7 +648,6 @@ static void __init omap_hsmmc_reset(void)
 
 	for (i = 0; i < nr_controllers; i++) {
 		u32 v, base = 0;
-		struct clk *iclk, *fclk;
 		struct device *dev = &dummy_pdev.dev;
 
 		switch (i) {
@@ -678,19 +678,16 @@ static void __init omap_hsmmc_reset(void)
 		dummy_pdev.id = i;
 		dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i);
 		iclk = clk_get(dev, "ick");
-		if (iclk && clk_enable(iclk))
-			iclk = NULL;
+		if (IS_ERR(iclk))
+			goto err1;
+		if (clk_enable(iclk))
+			goto err2;
 
 		fclk = clk_get(dev, "fck");
-		if (fclk && clk_enable(fclk))
-			fclk = NULL;
-
-		if (!iclk || !fclk) {
-			printk(KERN_WARNING
-			       "%s: Unable to enable clocks for MMC%d, "
-			       "cannot reset.\n",  __func__, i);
-			break;
-		}
+		if (IS_ERR(fclk))
+			goto err3;
+		if (clk_enable(fclk))
+			goto err4;
 
 		omap_writel(MMCHS_SYSCONFIG_SWRESET, base + MMCHS_SYSCONFIG);
 		v = omap_readl(base + MMCHS_SYSSTATUS);
@@ -698,15 +695,22 @@ static void __init omap_hsmmc_reset(void)
 			 MMCHS_SYSSTATUS_RESETDONE))
 			cpu_relax();
 
-		if (fclk) {
-			clk_disable(fclk);
-			clk_put(fclk);
-		}
-		if (iclk) {
-			clk_disable(iclk);
-			clk_put(iclk);
-		}
+		clk_disable(fclk);
+		clk_put(fclk);
+		clk_disable(iclk);
+		clk_put(iclk);
 	}
+	return;
+
+err4:
+	clk_put(fclk);
+err3:
+	clk_disable(iclk);
+err2:
+	clk_put(iclk);
+err1:
+	printk(KERN_WARNING "%s: Unable to enable clocks for MMC%d, "
+			    "cannot reset.\n",  __func__, i);
 }
 #else
 static inline void omap_hsmmc_reset(void) {}
@@ -951,72 +955,12 @@ static inline void omap_init_vout(void) {}
 
 /*-------------------------------------------------------------------------*/
 
-/*
- * Inorder to avoid any assumptions from bootloader regarding WDT
- * settings, WDT module is reset during init. This enables the watchdog
- * timer. Hence it is required to disable the watchdog after the WDT reset
- * during init. Otherwise the system would reboot as per the default
- * watchdog timer registers settings.
- */
-#define OMAP_WDT_WPS	(0x34)
-#define OMAP_WDT_SPR	(0x48)
-
-static int omap2_disable_wdt(struct omap_hwmod *oh, void *unused)
-{
-	void __iomem *base;
-	int ret;
-
-	if (!oh) {
-		pr_err("%s: Could not look up wdtimer_hwmod\n", __func__);
-		return -EINVAL;
-	}
-
-	base = omap_hwmod_get_mpu_rt_va(oh);
-	if (!base) {
-		pr_err("%s: Could not get the base address for %s\n",
-				oh->name, __func__);
-		return -EINVAL;
-	}
-
-	/* Enable the clocks before accessing the WDT registers */
-	ret = omap_hwmod_enable(oh);
-	if (ret) {
-		pr_err("%s: Could not enable clocks for %s\n",
-				oh->name, __func__);
-		return ret;
-	}
-
-	/* sequence required to disable watchdog */
-	__raw_writel(0xAAAA, base + OMAP_WDT_SPR);
-	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
-		cpu_relax();
-
-	__raw_writel(0x5555, base + OMAP_WDT_SPR);
-	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
-		cpu_relax();
-
-	ret = omap_hwmod_idle(oh);
-	if (ret)
-		pr_err("%s: Could not disable clocks for %s\n",
-				oh->name, __func__);
-
-	return ret;
-}
-
-static void __init omap_disable_wdt(void)
-{
-	if (cpu_class_is_omap2())
-		omap_hwmod_for_each_by_class("wd_timer",
-						omap2_disable_wdt, NULL);
-	return;
-}
-
 static int __init omap2_init_devices(void)
 {
-	/* please keep these calls, and their implementations above,
+	/*
+	 * please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.
 	 */
-	omap_disable_wdt();
 	omap_hsmmc_reset();
 	omap_init_audio();
 	omap_init_camera();
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
new file mode 100644
index 00000000000..d2f15f5cfd3
--- /dev/null
+++ b/arch/arm/mach-omap2/dma.c
@@ -0,0 +1,297 @@
+/*
+ * OMAP2+ DMA driver
+ *
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Converted DMA library into platform driver
+ *	- G, Manjunath Kondaiah <manjugk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/dma.h>
+
+#define OMAP2_DMA_STRIDE	0x60
+
+static u32 errata;
+static u8 dma_stride;
+
+static struct omap_dma_dev_attr *d;
+
+static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
+
+static u16 reg_map[] = {
+	[REVISION]		= 0x00,
+	[GCR]			= 0x78,
+	[IRQSTATUS_L0]		= 0x08,
+	[IRQSTATUS_L1]		= 0x0c,
+	[IRQSTATUS_L2]		= 0x10,
+	[IRQSTATUS_L3]		= 0x14,
+	[IRQENABLE_L0]		= 0x18,
+	[IRQENABLE_L1]		= 0x1c,
+	[IRQENABLE_L2]		= 0x20,
+	[IRQENABLE_L3]		= 0x24,
+	[SYSSTATUS]		= 0x28,
+	[OCP_SYSCONFIG]		= 0x2c,
+	[CAPS_0]		= 0x64,
+	[CAPS_2]		= 0x6c,
+	[CAPS_3]		= 0x70,
+	[CAPS_4]		= 0x74,
+
+	/* Common register offsets */
+	[CCR]			= 0x80,
+	[CLNK_CTRL]		= 0x84,
+	[CICR]			= 0x88,
+	[CSR]			= 0x8c,
+	[CSDP]			= 0x90,
+	[CEN]			= 0x94,
+	[CFN]			= 0x98,
+	[CSEI]			= 0xa4,
+	[CSFI]			= 0xa8,
+	[CDEI]			= 0xac,
+	[CDFI]			= 0xb0,
+	[CSAC]			= 0xb4,
+	[CDAC]			= 0xb8,
+
+	/* Channel specific register offsets */
+	[CSSA]			= 0x9c,
+	[CDSA]			= 0xa0,
+	[CCEN]			= 0xbc,
+	[CCFN]			= 0xc0,
+	[COLOR]			= 0xc4,
+
+	/* OMAP4 specific registers */
+	[CDP]			= 0xd0,
+	[CNDP]			= 0xd4,
+	[CCDN]			= 0xd8,
+};
+
+static struct omap_device_pm_latency omap2_dma_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func	 = omap_device_enable_hwmods,
+		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static void __iomem *dma_base;
+static inline void dma_write(u32 val, int reg, int lch)
+{
+	u8  stride;
+	u32 offset;
+
+	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+	offset = reg_map[reg] + (stride * lch);
+	__raw_writel(val, dma_base + offset);
+}
+
+static inline u32 dma_read(int reg, int lch)
+{
+	u8 stride;
+	u32 offset, val;
+
+	stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
+	offset = reg_map[reg] + (stride * lch);
+	val = __raw_readl(dma_base + offset);
+	return val;
+}
+
+static inline void omap2_disable_irq_lch(int lch)
+{
+	u32 val;
+
+	val = dma_read(IRQENABLE_L0, lch);
+	val &= ~(1 << lch);
+	dma_write(val, IRQENABLE_L0, lch);
+}
+
+static void omap2_clear_dma(int lch)
+{
+	int i = dma_common_ch_start;
+
+	for (; i <= dma_common_ch_end; i += 1)
+		dma_write(0, i, lch);
+}
+
+static void omap2_show_dma_caps(void)
+{
+	u8 revision = dma_read(REVISION, 0) & 0xff;
+	printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
+				revision >> 4, revision & 0xf);
+	return;
+}
+
+static u32 configure_dma_errata(void)
+{
+
+	/*
+	 * Errata applicable for OMAP2430ES1.0 and all omap2420
+	 *
+	 * I.
+	 * Erratum ID: Not Available
+	 * Inter Frame DMA buffering issue DMA will wrongly
+	 * buffer elements if packing and bursting is enabled. This might
+	 * result in data gets stalled in FIFO at the end of the block.
+	 * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
+	 * guarantee no data will stay in the DMA FIFO in case inter frame
+	 * buffering occurs
+	 *
+	 * II.
+	 * Erratum ID: Not Available
+	 * DMA may hang when several channels are used in parallel
+	 * In the following configuration, DMA channel hanging can occur:
+	 * a. Channel i, hardware synchronized, is enabled
+	 * b. Another channel (Channel x), software synchronized, is enabled.
+	 * c. Channel i is disabled before end of transfer
+	 * d. Channel i is reenabled.
+	 * e. Steps 1 to 4 are repeated a certain number of times.
+	 * f. A third channel (Channel y), software synchronized, is enabled.
+	 * Channel x and Channel y may hang immediately after step 'f'.
+	 * Workaround:
+	 * For any channel used - make sure NextLCH_ID is set to the value j.
+	 */
+	if (cpu_is_omap2420() || (cpu_is_omap2430() &&
+				(omap_type() == OMAP2430_REV_ES1_0))) {
+
+		SET_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING);
+		SET_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS);
+	}
+
+	/*
+	 * Erratum ID: i378: OMAP2+: sDMA Channel is not disabled
+	 * after a transaction error.
+	 * Workaround: SW should explicitely disable the channel.
+	 */
+	if (cpu_class_is_omap2())
+		SET_DMA_ERRATA(DMA_ERRATA_i378);
+
+	/*
+	 * Erratum ID: i541: sDMA FIFO draining does not finish
+	 * If sDMA channel is disabled on the fly, sDMA enters standby even
+	 * through FIFO Drain is still in progress
+	 * Workaround: Put sDMA in NoStandby more before a logical channel is
+	 * disabled, then put it back to SmartStandby right after the channel
+	 * finishes FIFO draining.
+	 */
+	if (cpu_is_omap34xx())
+		SET_DMA_ERRATA(DMA_ERRATA_i541);
+
+	/*
+	 * Erratum ID: i88 : Special programming model needed to disable DMA
+	 * before end of block.
+	 * Workaround: software must ensure that the DMA is configured in No
+	 * Standby mode(DMAx_OCP_SYSCONFIG.MIDLEMODE = "01")
+	 */
+	if (omap_type() == OMAP3430_REV_ES1_0)
+		SET_DMA_ERRATA(DMA_ERRATA_i88);
+
+	/*
+	 * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
+	 * read before the DMA controller finished disabling the channel.
+	 */
+	SET_DMA_ERRATA(DMA_ERRATA_3_3);
+
+	/*
+	 * Erratum ID: Not Available
+	 * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
+	 * after secure sram context save and restore.
+	 * Work around: Hence we need to manually clear those IRQs to avoid
+	 * spurious interrupts. This affects only secure devices.
+	 */
+	if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+		SET_DMA_ERRATA(DMA_ROMCODE_BUG);
+
+	return errata;
+}
+
+/* One time initializations */
+static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
+{
+	struct omap_device			*od;
+	struct omap_system_dma_plat_info	*p;
+	struct resource				*mem;
+	char					*name = "omap_dma_system";
+
+	dma_stride		= OMAP2_DMA_STRIDE;
+	dma_common_ch_start	= CSDP;
+	if (cpu_is_omap3630() || cpu_is_omap4430())
+		dma_common_ch_end = CCDN;
+	else
+		dma_common_ch_end = CCFN;
+
+	p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
+	if (!p) {
+		pr_err("%s: Unable to allocate pdata for %s:%s\n",
+			__func__, name, oh->name);
+		return -ENOMEM;
+	}
+
+	p->dma_attr		= (struct omap_dma_dev_attr *)oh->dev_attr;
+	p->disable_irq_lch	= omap2_disable_irq_lch;
+	p->show_dma_caps	= omap2_show_dma_caps;
+	p->clear_dma		= omap2_clear_dma;
+	p->dma_write		= dma_write;
+	p->dma_read		= dma_read;
+
+	p->clear_lch_regs	= NULL;
+
+	p->errata		= configure_dma_errata();
+
+	od = omap_device_build(name, 0, oh, p, sizeof(*p),
+			omap2_dma_latency, ARRAY_SIZE(omap2_dma_latency), 0);
+	kfree(p);
+	if (IS_ERR(od)) {
+		pr_err("%s: Cant build omap_device for %s:%s.\n",
+			__func__, name, oh->name);
+		return IS_ERR(od);
+	}
+
+	mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&od->pdev.dev, "%s: no mem resource\n", __func__);
+		return -EINVAL;
+	}
+	dma_base = ioremap(mem->start, resource_size(mem));
+	if (!dma_base) {
+		dev_err(&od->pdev.dev, "%s: ioremap fail\n", __func__);
+		return -ENOMEM;
+	}
+
+	d = oh->dev_attr;
+	d->chan = kzalloc(sizeof(struct omap_dma_lch) *
+					(d->lch_count), GFP_KERNEL);
+
+	if (!d->chan) {
+		dev_err(&od->pdev.dev, "%s: kzalloc fail\n", __func__);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int __init omap2_system_dma_init(void)
+{
+	return omap_hwmod_for_each_by_class("dma",
+			omap2_system_dma_init_dev, NULL);
+}
+arch_initcall(omap2_system_dma_init);
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index ed8d330522f..f77022be783 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -26,15 +26,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/bitops.h>
+#include <linux/clkdev.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
-#include <asm/clkdev.h>
 
 #include "clock.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 
 /* CM_AUTOIDLE_PLL*.AUTO_* bit values */
@@ -225,10 +223,9 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
 }
 
 /**
- * lookup_dco_sddiv -  Set j-type DPLL4 compensation variables
+ * _lookup_dco - Lookup DCO used by j-type DPLL
  * @clk: pointer to a DPLL struct clk
  * @dco: digital control oscillator selector
- * @sd_div: target sigma-delta divider
  * @m: DPLL multiplier to set
  * @n: DPLL divider to set
  *
@@ -237,11 +234,9 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
  * XXX This code is not needed for 3430/AM35xx; can it be optimized
  * out in non-multi-OMAP builds for those chips?
  */
-static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16 m,
-			     u8 n)
+static void _lookup_dco(struct clk *clk, u8 *dco, u16 m, u8 n)
 {
-	unsigned long fint, clkinp, sd; /* watch out for overflow */
-	int mod1, mod2;
+	unsigned long fint, clkinp; /* watch out for overflow */
 
 	clkinp = clk->parent->rate;
 	fint = (clkinp / n) * m;
@@ -250,6 +245,27 @@ static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16 m,
 		*dco = 2;
 	else
 		*dco = 4;
+}
+
+/**
+ * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL
+ * @clk: pointer to a DPLL struct clk
+ * @sd_div: target sigma-delta divider
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ *
+ * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
+ *
+ * XXX This code is not needed for 3430/AM35xx; can it be optimized
+ * out in non-multi-OMAP builds for those chips?
+ */
+static void _lookup_sddiv(struct clk *clk, u8 *sd_div, u16 m, u8 n)
+{
+	unsigned long clkinp, sd; /* watch out for overflow */
+	int mod1, mod2;
+
+	clkinp = clk->parent->rate;
+
 	/*
 	 * target sigma-delta to near 250MHz
 	 * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
@@ -278,6 +294,7 @@ static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16 m,
 static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
 {
 	struct dpll_data *dd = clk->dpll_data;
+	u8 dco, sd_div;
 	u32 v;
 
 	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
@@ -300,18 +317,16 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
 	v |= m << __ffs(dd->mult_mask);
 	v |= (n - 1) << __ffs(dd->div1_mask);
 
-	/*
-	 * XXX This code is not needed for 3430/AM35XX; can it be optimized
-	 * out in non-multi-OMAP builds for those chips?
-	 */
-	if ((dd->flags & DPLL_J_TYPE) && !(dd->flags & DPLL_NO_DCO_SEL)) {
-		u8 dco, sd_div;
-		lookup_dco_sddiv(clk, &dco, &sd_div, m, n);
-		/* XXX This probably will need revision for OMAP4 */
-		v &= ~(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK
-			| OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
-		v |= dco << __ffs(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK);
-		v |= sd_div << __ffs(OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
+	/* Configure dco and sd_div for dplls that have these fields */
+	if (dd->dco_mask) {
+		_lookup_dco(clk, &dco, m, n);
+		v &= ~(dd->dco_mask);
+		v |= dco << __ffs(dd->dco_mask);
+	}
+	if (dd->sddiv_mask) {
+		_lookup_sddiv(clk, &sd_div, m, n);
+		v &= ~(dd->sddiv_mask);
+		v |= sd_div << __ffs(dd->sddiv_mask);
 	}
 
 	__raw_writel(v, dd->mult_div1_reg);
diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c
index 6feeeae6c21..911cd2e68d4 100644
--- a/arch/arm/mach-omap2/dsp.c
+++ b/arch/arm/mach-omap2/dsp.c
@@ -11,9 +11,16 @@
  * published by the Free Software Foundation.
  */
 
+/*
+ * XXX The function pointers to the PRM/CM functions are incorrect and
+ * should be removed.  No device driver should be changing PRM/CM bits
+ * directly; that's a layering violation -- those bits are the responsibility
+ * of the OMAP PM core code.
+ */
+
 #include <linux/platform_device.h>
-#include "prm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
 #ifdef CONFIG_BRIDGE_DVFS
 #include <plat/omap-pm.h>
 #endif
@@ -31,12 +38,12 @@ static struct omap_dsp_platform_data omap_dsp_pdata __initdata = {
 	.cpu_set_freq = omap_pm_cpu_set_freq,
 	.cpu_get_freq = omap_pm_cpu_get_freq,
 #endif
-	.dsp_prm_read = prm_read_mod_reg,
-	.dsp_prm_write = prm_write_mod_reg,
-	.dsp_prm_rmw_bits = prm_rmw_mod_reg_bits,
-	.dsp_cm_read = cm_read_mod_reg,
-	.dsp_cm_write = cm_write_mod_reg,
-	.dsp_cm_rmw_bits = cm_rmw_mod_reg_bits,
+	.dsp_prm_read = omap2_prm_read_mod_reg,
+	.dsp_prm_write = omap2_prm_write_mod_reg,
+	.dsp_prm_rmw_bits = omap2_prm_rmw_mod_reg_bits,
+	.dsp_cm_read = omap2_cm_read_mod_reg,
+	.dsp_cm_write = omap2_cm_write_mod_reg,
+	.dsp_cm_rmw_bits = omap2_cm_rmw_mod_reg_bits,
 };
 
 static int __init omap_dsp_init(void)
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
new file mode 100644
index 00000000000..413de18c1d2
--- /dev/null
+++ b/arch/arm/mach-omap2/gpio.c
@@ -0,0 +1,104 @@
+/*
+ * OMAP2+ specific gpio initialization
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author:
+ *	Charulatha V <charu@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
+
+static struct omap_device_pm_latency omap_gpio_latency[] = {
+	[0] = {
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func   = omap_device_enable_hwmods,
+		.flags		 = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
+
+static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
+{
+	struct omap_device *od;
+	struct omap_gpio_platform_data *pdata;
+	struct omap_gpio_dev_attr *dev_attr;
+	char *name = "omap_gpio";
+	int id;
+
+	/*
+	 * extract the device id from name field available in the
+	 * hwmod database and use the same for constructing ids for
+	 * gpio devices.
+	 * CAUTION: Make sure the name in the hwmod database does
+	 * not change. If changed, make corresponding change here
+	 * or make use of static variable mechanism to handle this.
+	 */
+	sscanf(oh->name, "gpio%d", &id);
+
+	pdata = kzalloc(sizeof(struct omap_gpio_platform_data), GFP_KERNEL);
+	if (!pdata) {
+		pr_err("gpio%d: Memory allocation failed\n", id);
+		return -ENOMEM;
+	}
+
+	dev_attr = (struct omap_gpio_dev_attr *)oh->dev_attr;
+	pdata->bank_width = dev_attr->bank_width;
+	pdata->dbck_flag = dev_attr->dbck_flag;
+	pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1);
+
+	switch (oh->class->rev) {
+	case 0:
+	case 1:
+		pdata->bank_type = METHOD_GPIO_24XX;
+		break;
+	case 2:
+		pdata->bank_type = METHOD_GPIO_44XX;
+		break;
+	default:
+		WARN(1, "Invalid gpio bank_type\n");
+		kfree(pdata);
+		return -EINVAL;
+	}
+
+	od = omap_device_build(name, id - 1, oh, pdata,
+				sizeof(*pdata),	omap_gpio_latency,
+				ARRAY_SIZE(omap_gpio_latency),
+				false);
+	kfree(pdata);
+
+	if (IS_ERR(od)) {
+		WARN(1, "Cant build omap_device for %s:%s.\n",
+					name, oh->name);
+		return PTR_ERR(od);
+	}
+
+	gpio_bank_count++;
+	return 0;
+}
+
+/*
+ * gpio_init needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence gpio_init is a postcore_initcall.
+ */
+static int __init omap2_gpio_init(void)
+{
+	return omap_hwmod_for_each_by_class("gpio", omap2_gpio_dev_init,
+						NULL);
+}
+postcore_initcall(omap2_gpio_init);
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index 72220960192..2bb29c16070 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -41,7 +41,7 @@ static int omap2_nand_gpmc_retime(void)
 		return 0;
 
 	memset(&t, 0, sizeof(t));
-	t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk);
+	t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk;
 	t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
 	t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
 
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 7bb69220adf..3a7d25fb00e 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -173,8 +173,17 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	}
 
 	switch (freq) {
+	case 104:
+		min_gpmc_clk_period = 9600; /* 104 MHz */
+		t_ces   = 3;
+		t_avds  = 4;
+		t_avdh  = 2;
+		t_ach   = 3;
+		t_aavdh = 6;
+		t_rdyo  = 9;
+		break;
 	case 83:
-		min_gpmc_clk_period = 12; /* 83 MHz */
+		min_gpmc_clk_period = 12000; /* 83 MHz */
 		t_ces   = 5;
 		t_avds  = 4;
 		t_avdh  = 2;
@@ -183,7 +192,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		t_rdyo  = 9;
 		break;
 	case 66:
-		min_gpmc_clk_period = 15; /* 66 MHz */
+		min_gpmc_clk_period = 15000; /* 66 MHz */
 		t_ces   = 6;
 		t_avds  = 5;
 		t_avdh  = 2;
@@ -192,7 +201,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		t_rdyo  = 11;
 		break;
 	default:
-		min_gpmc_clk_period = 18; /* 54 MHz */
+		min_gpmc_clk_period = 18500; /* 54 MHz */
 		t_ces   = 7;
 		t_avds  = 7;
 		t_avdh  = 7;
@@ -271,8 +280,8 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		t.wr_cycle  = t.rd_cycle;
 		if (cpu_is_omap34xx()) {
 			t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
-					gpmc_ns_to_ticks(min_gpmc_clk_period +
-					t_rdyo));
+					gpmc_ps_to_ticks(min_gpmc_clk_period +
+					t_rdyo * 1000));
 			t.wr_access = t.access;
 		}
 	} else {
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f46933bc937..1b7b3e7d02f 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -168,6 +168,16 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
 	return (time_ns * 1000 + tick_ps - 1) / tick_ps;
 }
 
+unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
+{
+	unsigned long tick_ps;
+
+	/* Calculate in picosecs to yield more exact results */
+	tick_ps = gpmc_get_fclk_period();
+
+	return (time_ps + tick_ps - 1) / tick_ps;
+}
+
 unsigned int gpmc_ticks_to_ns(unsigned int ticks)
 {
 	return ticks * gpmc_get_fclk_period() / 1000;
@@ -235,7 +245,7 @@ int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
 	int div;
 	u32 l;
 
-	l = sync_clk * 1000 + (gpmc_get_fclk_period() - 1);
+	l = sync_clk + (gpmc_get_fclk_period() - 1);
 	div = l / gpmc_get_fclk_period();
 	if (div > 4)
 		return -1;
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index 06e64e1fc28..befa321c4c1 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -38,41 +38,27 @@
  */
 
 #ifdef MULTI_OMAP2
+
+/*
+ * We use __glue to avoid errors with multiple definitions of
+ * .globl omap_irq_base as it's included from entry-armv.S but not
+ * from entry-common.S.
+ */
+#ifdef __glue
 		.pushsection .data
-omap_irq_base:	.word	0
+		.globl	omap_irq_base
+omap_irq_base:
+		.word	0
 		.popsection
+#endif
 
-		/* Configure the interrupt base on the first interrupt */
+		/*
+		 * Configure the interrupt base on the first interrupt.
+		 * See also omap_irq_base_init for setting omap_irq_base.
+		 */
 		.macro  get_irqnr_preamble, base, tmp
-9:
 		ldr	\base, =omap_irq_base	@ irq base address
 		ldr	\base, [\base, #0]	@ irq base value
-		cmp	\base, #0		@ already configured?
-		bne	9997f			@ nothing to do
-
-		mrc	p15, 0, \tmp, c0, c0, 0	@ get processor revision
-		and	\tmp, \tmp, #0x000f0000	@ only check architecture
-		cmp	\tmp, #0x00070000	@ is v6?
-		beq	2400f			@ found v6 so it's omap24xx
-		mrc	p15, 0, \tmp, c0, c0, 0	@ get processor revision
-		and	\tmp, \tmp, #0x000000f0	@ check cortex 8 or 9
-		cmp	\tmp, #0x00000080	@ cortex A-8?
-		beq	3400f			@ found A-8 so it's omap34xx
-		cmp	\tmp, #0x00000090	@ cortex A-9?
-		beq	4400f			@ found A-9 so it's omap44xx
-2400:		ldr	\base, =OMAP2_IRQ_BASE
-		ldr	\tmp, =omap_irq_base
-		str	\base, [\tmp, #0]
-		b	9b
-3400:		ldr	\base, =OMAP3_IRQ_BASE
-		ldr	\tmp, =omap_irq_base
-		str	\base, [\tmp, #0]
-		b	9b
-4400:		ldr	\base, =OMAP4_IRQ_BASE
-		ldr	\tmp, =omap_irq_base
-		str	\base, [\tmp, #0]
-		b	9b
-9997:
 		.endm
 
 		/* Check the pending interrupts. Note that base already set */
@@ -105,6 +91,35 @@ omap_irq_base:	.word	0
 9999:
 		.endm
 
+#ifdef CONFIG_SMP
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt
+		 * on the controller, since this requires the original irqstat
+		 * value which we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		it	cc
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		it	cs
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		itt	eq
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
+#endif	/* CONFIG_SMP */
 
 #else	/* MULTI_OMAP2 */
 
@@ -141,74 +156,16 @@ omap_irq_base:	.word	0
 
 
 #ifdef CONFIG_ARCH_OMAP4
+#define HAVE_GET_IRQNR_PREAMBLE
+#include <asm/hardware/entry-macro-gic.S>
 
 		.macro  get_irqnr_preamble, base, tmp
 		ldr     \base, =OMAP4_IRQ_BASE
 		.endm
 
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an
-		 * interrupt if it's between 30 and 1020.  The test_for_ipi
-		 * routine below will pick up on IPIs.
-		 * A simple read from the controller will tell us the number
-		 * of the highest priority enabled interrupt.
-		 * We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-
-		ldr     \tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #29
-		cmpcc   \irqnr, \irqnr
-		cmpne   \irqnr, \tmp
-		cmpcs   \irqnr, \irqnr
-		.endm
 #endif
-#endif	/* MULTI_OMAP2 */
-
-#ifdef CONFIG_SMP
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt
-		 * on the controller, since this requires the original irqstat
-		 * value which we won't easily be able to recreate later.
-		 */
 
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		it	cc
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		it	cs
-		cmpcs	\irqnr, \irqnr
-		.endm
-
-		/* As above, this assumes that irqstat and base are preserved */
-
-		.macro test_for_ltirq, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		mov 	\tmp, #0
-		cmp	\irqnr, #29
-		itt	eq
-		moveq	\tmp, #1
-		streq	\irqstat, [\base, #GIC_CPU_EOI]
-		cmp	\tmp, #0
-		.endm
-#endif	/* CONFIG_SMP */
+#endif	/* MULTI_OMAP2 */
 
 		.macro	irq_prio_table
 		.endm
diff --git a/arch/arm/mach-omap2/include/mach/omap4-common.h b/arch/arm/mach-omap2/include/mach/omap4-common.h
index 2744dfee1ff..5b0270b2893 100644
--- a/arch/arm/mach-omap2/include/mach/omap4-common.h
+++ b/arch/arm/mach-omap2/include/mach/omap4-common.h
@@ -24,7 +24,6 @@
 extern void __iomem *l2cache_base;
 #endif
 
-extern void __iomem *gic_cpu_base_addr;
 extern void __iomem *gic_dist_base_addr;
 
 extern void __init gic_init_irq(void);
diff --git a/arch/arm/mach-omap2/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index 4da31e997ef..86631994776 100644
--- a/arch/arm/mach-omap2/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  0xf8000000
+#define VMALLOC_END	  0xf8000000UL
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 40562ddd3ee..e66687b0b9d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -39,13 +39,11 @@
 #include "io.h"
 
 #include <plat/omap-pm.h>
-#include <plat/powerdomain.h>
-#include "powerdomains.h"
-
-#include <plat/clockdomain.h>
-#include "clockdomains.h"
+#include "powerdomain.h"
 
+#include "clockdomain.h"
 #include <plat/omap_hwmod.h>
+#include <plat/multi.h>
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -297,7 +295,7 @@ static int __init _omap2_init_reprogram_sdrc(void)
 		return 0;
 
 	dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
-	if (!dpll3_m2_ck)
+	if (IS_ERR(dpll3_m2_ck))
 		return -EINVAL;
 
 	rate = clk_get_rate(dpll3_m2_ck);
@@ -311,24 +309,81 @@ static int __init _omap2_init_reprogram_sdrc(void)
 	return v;
 }
 
-void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
-				 struct omap_sdrc_params *sdrc_cs1)
+static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
+{
+	return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
+}
+
+/*
+ * Initialize asm_irq_base for entry-macro.S
+ */
+static inline void omap_irq_base_init(void)
+{
+	extern void __iomem *omap_irq_base;
+
+#ifdef MULTI_OMAP2
+	if (cpu_is_omap24xx())
+		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
+	else if (cpu_is_omap34xx())
+		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE);
+	else if (cpu_is_omap44xx())
+		omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
+	else
+		pr_err("Could not initialize omap_irq_base\n");
+#endif
+}
+
+void __init omap2_init_common_infrastructure(void)
 {
-	u8 skip_setup_idle = 0;
+	u8 postsetup_state;
 
-	pwrdm_init(powerdomains_omap);
-	clkdm_init(clockdomains_omap, clkdm_autodeps);
-	if (cpu_is_omap242x())
+	if (cpu_is_omap242x()) {
+		omap2xxx_powerdomains_init();
+		omap2_clockdomains_init();
 		omap2420_hwmod_init();
-	else if (cpu_is_omap243x())
+	} else if (cpu_is_omap243x()) {
+		omap2xxx_powerdomains_init();
+		omap2_clockdomains_init();
 		omap2430_hwmod_init();
-	else if (cpu_is_omap34xx())
+	} else if (cpu_is_omap34xx()) {
+		omap3xxx_powerdomains_init();
+		omap2_clockdomains_init();
 		omap3xxx_hwmod_init();
-	else if (cpu_is_omap44xx())
+	} else if (cpu_is_omap44xx()) {
+		omap44xx_powerdomains_init();
+		omap44xx_clockdomains_init();
 		omap44xx_hwmod_init();
+	} else {
+		pr_err("Could not init hwmod data - unknown SoC\n");
+        }
+
+	/* Set the default postsetup state for all hwmods */
+#ifdef CONFIG_PM_RUNTIME
+	postsetup_state = _HWMOD_STATE_IDLE;
+#else
+	postsetup_state = _HWMOD_STATE_ENABLED;
+#endif
+	omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
+
+	/*
+	 * Set the default postsetup state for unusual modules (like
+	 * MPU WDT).
+	 *
+	 * The postsetup_state is not actually used until
+	 * omap_hwmod_late_init(), so boards that desire full watchdog
+	 * coverage of kernel initialization can reprogram the
+	 * postsetup_state between the calls to
+	 * omap2_init_common_infra() and omap2_init_common_devices().
+	 *
+	 * XXX ideally we could detect whether the MPU WDT was currently
+	 * enabled here and make this conditional
+	 */
+	postsetup_state = _HWMOD_STATE_DISABLED;
+	omap_hwmod_for_each_by_class("wd_timer",
+				     _set_hwmod_postsetup_state,
+				     &postsetup_state);
 
-	/* The OPP tables have to be registered before a clk init */
-	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
+	omap_pm_if_early_init();
 
 	if (cpu_is_omap2420())
 		omap2420_clk_init();
@@ -339,17 +394,61 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	else if (cpu_is_omap44xx())
 		omap4xxx_clk_init();
 	else
-		pr_err("Could not init clock framework - unknown CPU\n");
+		pr_err("Could not init clock framework - unknown SoC\n");
+}
 
+void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+				      struct omap_sdrc_params *sdrc_cs1)
+{
 	omap_serial_early_init();
 
-#ifndef CONFIG_PM_RUNTIME
-	skip_setup_idle = 1;
-#endif
-	omap_hwmod_late_init(skip_setup_idle);
+	omap_hwmod_late_init();
+
 	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
 		omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 		_omap2_init_reprogram_sdrc();
 	}
 	gpmc_init();
+
+	omap_irq_base_init();
+}
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+u8 omap_readb(u32 pa)
+{
+	return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readb);
+
+u16 omap_readw(u32 pa)
+{
+	return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readw);
+
+u32 omap_readl(u32 pa)
+{
+	return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_readl);
+
+void omap_writeb(u8 v, u32 pa)
+{
+	__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writeb);
+
+void omap_writew(u16 v, u32 pa)
+{
+	__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+EXPORT_SYMBOL(omap_writew);
+
+void omap_writel(u32 v, u32 pa)
+{
+	__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
 }
+EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 32eeabe9d2a..85bf8ca95fd 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -284,7 +284,10 @@ void omap3_intc_suspend(void)
 
 void omap3_intc_prepare_idle(void)
 {
-	/* Disable autoidle as it can stall interrupt controller */
+	/*
+	 * Disable autoidle as it can stall interrupt controller,
+	 * cf. errata ID i540 for 3430 (all revisions up to 3.1.x)
+	 */
 	intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
 }
 
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 40ddecab93a..394413dc7de 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -281,7 +281,7 @@ static struct omap_mbox_ops omap2_mbox_ops = {
 
 /* FIXME: the following structs should be filled automatically by the user id */
 
-#if defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_ARCH_OMAP2420)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP2)
 /* DSP */
 static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.tx_fifo = {
@@ -306,7 +306,7 @@ struct omap_mbox mbox_dsp_info = {
 };
 #endif
 
-#if defined(CONFIG_ARCH_OMAP3430)
+#if defined(CONFIG_ARCH_OMAP3)
 struct omap_mbox *omap3_mboxes[] = { &mbox_dsp_info, NULL };
 #endif
 
@@ -394,15 +394,19 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 
 	if (false)
 		;
-#if defined(CONFIG_ARCH_OMAP3430)
-	else if (cpu_is_omap3430()) {
+#if defined(CONFIG_ARCH_OMAP3)
+	else if (cpu_is_omap34xx()) {
 		list = omap3_mboxes;
 
 		list[0]->irq = platform_get_irq_byname(pdev, "dsp");
 	}
 #endif
-#if defined(CONFIG_ARCH_OMAP2420)
-	else if (cpu_is_omap2420()) {
+#if defined(CONFIG_ARCH_OMAP2)
+	else if (cpu_is_omap2430()) {
+		list = omap2_mboxes;
+
+		list[0]->irq = platform_get_irq_byname(pdev, "dsp");
+	} else if (cpu_is_omap2420()) {
 		list = omap2_mboxes;
 
 		list[0]->irq = platform_get_irq_byname(pdev, "dsp");
@@ -432,9 +436,8 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		iounmap(mbox_base);
 		return ret;
 	}
-	return 0;
 
-	return ret;
+	return 0;
 }
 
 static int __devexit omap2_mbox_remove(struct platform_device *pdev)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 074536ae401..17bd6394d22 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1,9 +1,9 @@
 /*
  * linux/arch/arm/mach-omap2/mux.c
  *
- * OMAP2 and OMAP3 pin multiplexing configurations
+ * OMAP2, OMAP3 and OMAP4 pin multiplexing configurations
  *
- * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2004 - 2010 Texas Instruments Inc.
  * Copyright (C) 2003 - 2008 Nokia Corporation
  *
  * Written by Tony Lindgren
@@ -35,65 +35,79 @@
 
 #include <asm/system.h>
 
+#include <plat/omap_hwmod.h>
+
 #include "control.h"
 #include "mux.h"
 
 #define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
 #define OMAP_MUX_BASE_SZ		0x5ca
-#define MUXABLE_GPIO_MODE3		BIT(0)
 
 struct omap_mux_entry {
 	struct omap_mux		mux;
 	struct list_head	node;
 };
 
-static unsigned long mux_phys;
-static void __iomem *mux_base;
-static u8 omap_mux_flags;
+static LIST_HEAD(mux_partitions);
+static DEFINE_MUTEX(muxmode_mutex);
+
+struct omap_mux_partition *omap_mux_get(const char *name)
+{
+	struct omap_mux_partition *partition;
+
+	list_for_each_entry(partition, &mux_partitions, node) {
+		if (!strcmp(name, partition->name))
+			return partition;
+	}
+
+	return NULL;
+}
 
-u16 omap_mux_read(u16 reg)
+u16 omap_mux_read(struct omap_mux_partition *partition, u16 reg)
 {
-	if (cpu_is_omap24xx())
-		return __raw_readb(mux_base + reg);
+	if (partition->flags & OMAP_MUX_REG_8BIT)
+		return __raw_readb(partition->base + reg);
 	else
-		return __raw_readw(mux_base + reg);
+		return __raw_readw(partition->base + reg);
 }
 
-void omap_mux_write(u16 val, u16 reg)
+void omap_mux_write(struct omap_mux_partition *partition, u16 val,
+			   u16 reg)
 {
-	if (cpu_is_omap24xx())
-		__raw_writeb(val, mux_base + reg);
+	if (partition->flags & OMAP_MUX_REG_8BIT)
+		__raw_writeb(val, partition->base + reg);
 	else
-		__raw_writew(val, mux_base + reg);
+		__raw_writew(val, partition->base + reg);
 }
 
-void omap_mux_write_array(struct omap_board_mux *board_mux)
+void omap_mux_write_array(struct omap_mux_partition *partition,
+				 struct omap_board_mux *board_mux)
 {
-	while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
-		omap_mux_write(board_mux->value, board_mux->reg_offset);
+	while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
+		omap_mux_write(partition, board_mux->value,
+			       board_mux->reg_offset);
 		board_mux++;
 	}
 }
 
-static LIST_HEAD(muxmodes);
-static DEFINE_MUTEX(muxmode_mutex);
-
 #ifdef CONFIG_OMAP_MUX
 
 static char *omap_mux_options;
 
-int __init omap_mux_init_gpio(int gpio, int val)
+static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
+				      int gpio, int val)
 {
 	struct omap_mux_entry *e;
 	struct omap_mux *gpio_mux = NULL;
 	u16 old_mode;
 	u16 mux_mode;
 	int found = 0;
+	struct list_head *muxmodes = &partition->muxmodes;
 
 	if (!gpio)
 		return -EINVAL;
 
-	list_for_each_entry(e, &muxmodes, node) {
+	list_for_each_entry(e, muxmodes, node) {
 		struct omap_mux *m = &e->mux;
 		if (gpio == m->gpio) {
 			gpio_mux = m;
@@ -102,34 +116,52 @@ int __init omap_mux_init_gpio(int gpio, int val)
 	}
 
 	if (found == 0) {
-		printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+		pr_err("%s: Could not set gpio%i\n", __func__, gpio);
 		return -ENODEV;
 	}
 
 	if (found > 1) {
-		printk(KERN_INFO "mux: Multiple gpio paths (%d) for gpio%i\n",
-				found, gpio);
+		pr_info("%s: Multiple gpio paths (%d) for gpio%i\n", __func__,
+			found, gpio);
 		return -EINVAL;
 	}
 
-	old_mode = omap_mux_read(gpio_mux->reg_offset);
+	old_mode = omap_mux_read(partition, gpio_mux->reg_offset);
 	mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
-	if (omap_mux_flags & MUXABLE_GPIO_MODE3)
+	if (partition->flags & OMAP_MUX_GPIO_IN_MODE3)
 		mux_mode |= OMAP_MUX_MODE3;
 	else
 		mux_mode |= OMAP_MUX_MODE4;
-	printk(KERN_DEBUG "mux: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n",
-			gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
-	omap_mux_write(mux_mode, gpio_mux->reg_offset);
+	pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__,
+		 gpio_mux->muxnames[0], gpio, old_mode, mux_mode);
+	omap_mux_write(partition, mux_mode, gpio_mux->reg_offset);
 
 	return 0;
 }
 
-int __init omap_mux_init_signal(const char *muxname, int val)
+int __init omap_mux_init_gpio(int gpio, int val)
+{
+	struct omap_mux_partition *partition;
+	int ret;
+
+	list_for_each_entry(partition, &mux_partitions, node) {
+		ret = _omap_mux_init_gpio(partition, gpio, val);
+		if (!ret)
+			return ret;
+	}
+
+	return -ENODEV;
+}
+
+static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
+					const char *muxname,
+					struct omap_mux **found_mux)
 {
+	struct omap_mux *mux = NULL;
 	struct omap_mux_entry *e;
 	const char *mode_name;
-	int found = 0, mode0_len = 0;
+	int found = 0, found_mode, mode0_len = 0;
+	struct list_head *muxmodes = &partition->muxmodes;
 
 	mode_name = strchr(muxname, '.');
 	if (mode_name) {
@@ -139,51 +171,200 @@ int __init omap_mux_init_signal(const char *muxname, int val)
 		mode_name = muxname;
 	}
 
-	list_for_each_entry(e, &muxmodes, node) {
-		struct omap_mux *m = &e->mux;
-		char *m0_entry = m->muxnames[0];
+	list_for_each_entry(e, muxmodes, node) {
+		char *m0_entry;
 		int i;
 
+		mux = &e->mux;
+		m0_entry = mux->muxnames[0];
+
 		/* First check for full name in mode0.muxmode format */
 		if (mode0_len && strncmp(muxname, m0_entry, mode0_len))
 			continue;
 
 		/* Then check for muxmode only */
 		for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
-			char *mode_cur = m->muxnames[i];
+			char *mode_cur = mux->muxnames[i];
 
 			if (!mode_cur)
 				continue;
 
 			if (!strcmp(mode_name, mode_cur)) {
-				u16 old_mode;
-				u16 mux_mode;
-
-				old_mode = omap_mux_read(m->reg_offset);
-				mux_mode = val | i;
-				printk(KERN_DEBUG "mux: Setting signal "
-					"%s.%s 0x%04x -> 0x%04x\n",
-					m0_entry, muxname, old_mode, mux_mode);
-				omap_mux_write(mux_mode, m->reg_offset);
+				*found_mux = mux;
 				found++;
+				found_mode = i;
 			}
 		}
 	}
 
-	if (found == 1)
-		return 0;
+	if (found == 1) {
+		return found_mode;
+	}
 
 	if (found > 1) {
-		printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n",
-				found, muxname);
+		pr_err("%s: Multiple signal paths (%i) for %s\n", __func__,
+		       found, muxname);
 		return -EINVAL;
 	}
 
-	printk(KERN_ERR "mux: Could not set signal %s\n", muxname);
+	pr_err("%s: Could not find signal %s\n", __func__, muxname);
 
 	return -ENODEV;
 }
 
+static int __init
+omap_mux_get_by_name(const char *muxname,
+			struct omap_mux_partition **found_partition,
+			struct omap_mux **found_mux)
+{
+	struct omap_mux_partition *partition;
+
+	list_for_each_entry(partition, &mux_partitions, node) {
+		struct omap_mux *mux = NULL;
+		int mux_mode = _omap_mux_get_by_name(partition, muxname, &mux);
+		if (mux_mode < 0)
+			continue;
+
+		*found_partition = partition;
+		*found_mux = mux;
+
+		return mux_mode;
+	}
+
+	return -ENODEV;
+}
+
+int __init omap_mux_init_signal(const char *muxname, int val)
+{
+	struct omap_mux_partition *partition = NULL;
+	struct omap_mux *mux = NULL;
+	u16 old_mode;
+	int mux_mode;
+
+	mux_mode = omap_mux_get_by_name(muxname, &partition, &mux);
+	if (mux_mode < 0)
+		return mux_mode;
+
+	old_mode = omap_mux_read(partition, mux->reg_offset);
+	mux_mode |= val;
+	pr_debug("%s: Setting signal %s 0x%04x -> 0x%04x\n",
+			 __func__, muxname, old_mode, mux_mode);
+	omap_mux_write(partition, mux_mode, mux->reg_offset);
+
+	return 0;
+}
+
+struct omap_hwmod_mux_info * __init
+omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
+{
+	struct omap_hwmod_mux_info *hmux;
+	int i;
+
+	if (!bpads || nr_pads < 1)
+		return NULL;
+
+	hmux = kzalloc(sizeof(struct omap_hwmod_mux_info), GFP_KERNEL);
+	if (!hmux)
+		goto err1;
+
+	hmux->nr_pads = nr_pads;
+
+	hmux->pads = kzalloc(sizeof(struct omap_device_pad) *
+				nr_pads, GFP_KERNEL);
+	if (!hmux->pads)
+		goto err2;
+
+	for (i = 0; i < hmux->nr_pads; i++) {
+		struct omap_mux_partition *partition;
+		struct omap_device_pad *bpad = &bpads[i], *pad = &hmux->pads[i];
+		struct omap_mux *mux;
+		int mux_mode;
+
+		mux_mode = omap_mux_get_by_name(bpad->name, &partition, &mux);
+		if (mux_mode < 0)
+			goto err3;
+		if (!pad->partition)
+			pad->partition = partition;
+		if (!pad->mux)
+			pad->mux = mux;
+
+		pad->name = kzalloc(strlen(bpad->name) + 1, GFP_KERNEL);
+		if (!pad->name) {
+			int j;
+
+			for (j = i - 1; j >= 0; j--)
+				kfree(hmux->pads[j].name);
+			goto err3;
+		}
+		strcpy(pad->name, bpad->name);
+
+		pad->flags = bpad->flags;
+		pad->enable = bpad->enable;
+		pad->idle = bpad->idle;
+		pad->off = bpad->off;
+		pr_debug("%s: Initialized %s\n", __func__, pad->name);
+	}
+
+	return hmux;
+
+err3:
+	kfree(hmux->pads);
+err2:
+	kfree(hmux);
+err1:
+	pr_err("%s: Could not allocate device mux entry\n", __func__);
+
+	return NULL;
+}
+
+/* Assumes the calling function takes care of locking */
+void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
+{
+	int i;
+
+	for (i = 0; i < hmux->nr_pads; i++) {
+		struct omap_device_pad *pad = &hmux->pads[i];
+		int flags, val = -EINVAL;
+
+		flags = pad->flags;
+
+		switch (state) {
+		case _HWMOD_STATE_ENABLED:
+			if (flags & OMAP_DEVICE_PAD_ENABLED)
+				break;
+			flags |= OMAP_DEVICE_PAD_ENABLED;
+			val = pad->enable;
+			pr_debug("%s: Enabling %s %x\n", __func__,
+					pad->name, val);
+			break;
+		case _HWMOD_STATE_IDLE:
+			if (!(flags & OMAP_DEVICE_PAD_REMUX))
+				break;
+			flags &= ~OMAP_DEVICE_PAD_ENABLED;
+			val = pad->idle;
+			pr_debug("%s: Idling %s %x\n", __func__,
+					pad->name, val);
+			break;
+		case _HWMOD_STATE_DISABLED:
+		default:
+			/* Use safe mode unless OMAP_DEVICE_PAD_REMUX */
+			if (flags & OMAP_DEVICE_PAD_REMUX)
+				val = pad->off;
+			else
+				val = OMAP_MUX_MODE7;
+			flags &= ~OMAP_DEVICE_PAD_ENABLED;
+			pr_debug("%s: Disabling %s %x\n", __func__,
+					pad->name, val);
+		};
+
+		if (val >= 0) {
+			omap_mux_write(pad->partition, val,
+					pad->mux->reg_offset);
+			pad->flags = flags;
+		}
+	}
+}
+
 #ifdef CONFIG_DEBUG_FS
 
 #define OMAP_MUX_MAX_NR_FLAGS	10
@@ -248,13 +429,15 @@ static inline void omap_mux_decode(struct seq_file *s, u16 val)
 	} while (i-- > 0);
 }
 
-#define OMAP_MUX_DEFNAME_LEN	16
+#define OMAP_MUX_DEFNAME_LEN	32
 
 static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
 {
+	struct omap_mux_partition *partition = s->private;
 	struct omap_mux_entry *e;
+	u8 omap_gen = omap_rev() >> 28;
 
-	list_for_each_entry(e, &muxmodes, node) {
+	list_for_each_entry(e, &partition->muxmodes, node) {
 		struct omap_mux *m = &e->mux;
 		char m0_def[OMAP_MUX_DEFNAME_LEN];
 		char *m0_name = m->muxnames[0];
@@ -272,11 +455,16 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
 			}
 			m0_def[i] = toupper(m0_name[i]);
 		}
-		val = omap_mux_read(m->reg_offset);
+		val = omap_mux_read(partition, m->reg_offset);
 		mode = val & OMAP_MUX_MODE7;
-
-		seq_printf(s, "OMAP%i_MUX(%s, ",
-					cpu_is_omap34xx() ? 3 : 0, m0_def);
+		if (mode != 0)
+			seq_printf(s, "/* %s */\n", m->muxnames[mode]);
+
+		/*
+		 * XXX: Might be revisited to support differences accross
+		 * same OMAP generation.
+		 */
+		seq_printf(s, "OMAP%d_MUX(%s, ", omap_gen, m0_def);
 		omap_mux_decode(s, val);
 		seq_printf(s, "),\n");
 	}
@@ -286,7 +474,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
 
 static int omap_mux_dbg_board_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, omap_mux_dbg_board_show, &inode->i_private);
+	return single_open(file, omap_mux_dbg_board_show, inode->i_private);
 }
 
 static const struct file_operations omap_mux_dbg_board_fops = {
@@ -296,19 +484,43 @@ static const struct file_operations omap_mux_dbg_board_fops = {
 	.release	= single_release,
 };
 
+static struct omap_mux_partition *omap_mux_get_partition(struct omap_mux *mux)
+{
+	struct omap_mux_partition *partition;
+
+	list_for_each_entry(partition, &mux_partitions, node) {
+		struct list_head *muxmodes = &partition->muxmodes;
+		struct omap_mux_entry *e;
+
+		list_for_each_entry(e, muxmodes, node) {
+			struct omap_mux *m = &e->mux;
+
+			if (m == mux)
+				return partition;
+		}
+	}
+
+	return NULL;
+}
+
 static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
 {
 	struct omap_mux *m = s->private;
+	struct omap_mux_partition *partition;
 	const char *none = "NA";
 	u16 val;
 	int mode;
 
-	val = omap_mux_read(m->reg_offset);
+	partition = omap_mux_get_partition(m);
+	if (!partition)
+		return 0;
+
+	val = omap_mux_read(partition, m->reg_offset);
 	mode = val & OMAP_MUX_MODE7;
 
-	seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n",
+	seq_printf(s, "name: %s.%s (0x%08x/0x%03x = 0x%04x), b %s, t %s\n",
 			m->muxnames[0], m->muxnames[mode],
-			mux_phys + m->reg_offset, m->reg_offset, val,
+			partition->phys + m->reg_offset, m->reg_offset, val,
 			m->balls[0] ? m->balls[0] : none,
 			m->balls[1] ? m->balls[1] : none);
 	seq_printf(s, "mode: ");
@@ -330,14 +542,15 @@ static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
 #define OMAP_MUX_MAX_ARG_CHAR  7
 
 static ssize_t omap_mux_dbg_signal_write(struct file *file,
-						const char __user *user_buf,
-						size_t count, loff_t *ppos)
+					 const char __user *user_buf,
+					 size_t count, loff_t *ppos)
 {
 	char buf[OMAP_MUX_MAX_ARG_CHAR];
 	struct seq_file *seqf;
 	struct omap_mux *m;
 	unsigned long val;
 	int buf_size, ret;
+	struct omap_mux_partition *partition;
 
 	if (count > OMAP_MUX_MAX_ARG_CHAR)
 		return -EINVAL;
@@ -358,7 +571,11 @@ static ssize_t omap_mux_dbg_signal_write(struct file *file,
 	seqf = file->private_data;
 	m = seqf->private;
 
-	omap_mux_write((u16)val, m->reg_offset);
+	partition = omap_mux_get_partition(m);
+	if (!partition)
+		return -ENODEV;
+
+	omap_mux_write(partition, (u16)val, m->reg_offset);
 	*ppos += count;
 
 	return count;
@@ -379,22 +596,38 @@ static const struct file_operations omap_mux_dbg_signal_fops = {
 
 static struct dentry *mux_dbg_dir;
 
-static void __init omap_mux_dbg_init(void)
+static void __init omap_mux_dbg_create_entry(
+				struct omap_mux_partition *partition,
+				struct dentry *mux_dbg_dir)
 {
 	struct omap_mux_entry *e;
 
+	list_for_each_entry(e, &partition->muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+
+		(void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
+					  m, &omap_mux_dbg_signal_fops);
+	}
+}
+
+static void __init omap_mux_dbg_init(void)
+{
+	struct omap_mux_partition *partition;
+	static struct dentry *mux_dbg_board_dir;
+
 	mux_dbg_dir = debugfs_create_dir("omap_mux", NULL);
 	if (!mux_dbg_dir)
 		return;
 
-	(void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir,
-					NULL, &omap_mux_dbg_board_fops);
-
-	list_for_each_entry(e, &muxmodes, node) {
-		struct omap_mux *m = &e->mux;
+	mux_dbg_board_dir = debugfs_create_dir("board", mux_dbg_dir);
+	if (!mux_dbg_board_dir)
+		return;
 
-		(void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
-					m, &omap_mux_dbg_signal_fops);
+	list_for_each_entry(partition, &mux_partitions, node) {
+		omap_mux_dbg_create_entry(partition, mux_dbg_dir);
+		(void)debugfs_create_file(partition->name, S_IRUGO,
+					  mux_dbg_board_dir, partition,
+					  &omap_mux_dbg_board_fops);
 	}
 }
 
@@ -421,23 +654,25 @@ static void __init omap_mux_free_names(struct omap_mux *m)
 /* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
 static int __init omap_mux_late_init(void)
 {
-	struct omap_mux_entry *e, *tmp;
+	struct omap_mux_partition *partition;
 
-	list_for_each_entry_safe(e, tmp, &muxmodes, node) {
-		struct omap_mux *m = &e->mux;
-		u16 mode = omap_mux_read(m->reg_offset);
+	list_for_each_entry(partition, &mux_partitions, node) {
+		struct omap_mux_entry *e, *tmp;
+		list_for_each_entry_safe(e, tmp, &partition->muxmodes, node) {
+			struct omap_mux *m = &e->mux;
+			u16 mode = omap_mux_read(partition, m->reg_offset);
 
-		if (OMAP_MODE_GPIO(mode))
-			continue;
+			if (OMAP_MODE_GPIO(mode))
+				continue;
 
 #ifndef CONFIG_DEBUG_FS
-		mutex_lock(&muxmode_mutex);
-		list_del(&e->node);
-		mutex_unlock(&muxmode_mutex);
-		omap_mux_free_names(m);
-		kfree(m);
+			mutex_lock(&muxmode_mutex);
+			list_del(&e->node);
+			mutex_unlock(&muxmode_mutex);
+			omap_mux_free_names(m);
+			kfree(m);
 #endif
-
+		}
 	}
 
 	omap_mux_dbg_init();
@@ -462,8 +697,8 @@ static void __init omap_mux_package_fixup(struct omap_mux *p,
 			s++;
 		}
 		if (!found)
-			printk(KERN_ERR "mux: Unknown entry offset 0x%x\n",
-					p->reg_offset);
+			pr_err("%s: Unknown entry offset 0x%x\n", __func__,
+			       p->reg_offset);
 		p++;
 	}
 }
@@ -487,8 +722,8 @@ static void __init omap_mux_package_init_balls(struct omap_ball *b,
 			s++;
 		}
 		if (!found)
-			printk(KERN_ERR "mux: Unknown ball offset 0x%x\n",
-					b->reg_offset);
+			pr_err("%s: Unknown ball offset 0x%x\n", __func__,
+			       b->reg_offset);
 		b++;
 	}
 }
@@ -554,7 +789,7 @@ static void __init omap_mux_set_cmdline_signals(void)
 }
 
 static int __init omap_mux_copy_names(struct omap_mux *src,
-					struct omap_mux *dst)
+				      struct omap_mux *dst)
 {
 	int i;
 
@@ -592,51 +827,63 @@ free:
 
 #endif	/* CONFIG_OMAP_MUX */
 
-static u16 omap_mux_get_by_gpio(int gpio)
+static struct omap_mux *omap_mux_get_by_gpio(
+				struct omap_mux_partition *partition,
+				int gpio)
 {
 	struct omap_mux_entry *e;
-	u16 offset = OMAP_MUX_TERMINATOR;
+	struct omap_mux *ret = NULL;
 
-	list_for_each_entry(e, &muxmodes, node) {
+	list_for_each_entry(e, &partition->muxmodes, node) {
 		struct omap_mux *m = &e->mux;
 		if (m->gpio == gpio) {
-			offset = m->reg_offset;
+			ret = m;
 			break;
 		}
 	}
 
-	return offset;
+	return ret;
 }
 
 /* Needed for dynamic muxing of GPIO pins for off-idle */
 u16 omap_mux_get_gpio(int gpio)
 {
-	u16 offset;
+	struct omap_mux_partition *partition;
+	struct omap_mux *m;
 
-	offset = omap_mux_get_by_gpio(gpio);
-	if (offset == OMAP_MUX_TERMINATOR) {
-		printk(KERN_ERR "mux: Could not get gpio%i\n", gpio);
-		return offset;
+	list_for_each_entry(partition, &mux_partitions, node) {
+		m = omap_mux_get_by_gpio(partition, gpio);
+		if (m)
+			return omap_mux_read(partition, m->reg_offset);
 	}
 
-	return omap_mux_read(offset);
+	if (!m || m->reg_offset == OMAP_MUX_TERMINATOR)
+		pr_err("%s: Could not get gpio%i\n", __func__, gpio);
+
+	return OMAP_MUX_TERMINATOR;
 }
 
 /* Needed for dynamic muxing of GPIO pins for off-idle */
 void omap_mux_set_gpio(u16 val, int gpio)
 {
-	u16 offset;
+	struct omap_mux_partition *partition;
+	struct omap_mux *m = NULL;
 
-	offset = omap_mux_get_by_gpio(gpio);
-	if (offset == OMAP_MUX_TERMINATOR) {
-		printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
-		return;
+	list_for_each_entry(partition, &mux_partitions, node) {
+		m = omap_mux_get_by_gpio(partition, gpio);
+		if (m) {
+			omap_mux_write(partition, val, m->reg_offset);
+			return;
+		}
 	}
 
-	omap_mux_write(val, offset);
+	if (!m || m->reg_offset == OMAP_MUX_TERMINATOR)
+		pr_err("%s: Could not set gpio%i\n", __func__, gpio);
 }
 
-static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src)
+static struct omap_mux * __init omap_mux_list_add(
+					struct omap_mux_partition *partition,
+					struct omap_mux *src)
 {
 	struct omap_mux_entry *entry;
 	struct omap_mux *m;
@@ -656,7 +903,7 @@ static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src)
 #endif
 
 	mutex_lock(&muxmode_mutex);
-	list_add_tail(&entry->node, &muxmodes);
+	list_add_tail(&entry->node, &partition->muxmodes);
 	mutex_unlock(&muxmode_mutex);
 
 	return m;
@@ -667,7 +914,8 @@ static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src)
  * the GPIO to mux offset mapping that is needed for dynamic muxing
  * of GPIO pins for off-idle.
  */
-static void __init omap_mux_init_list(struct omap_mux *superset)
+static void __init omap_mux_init_list(struct omap_mux_partition *partition,
+				      struct omap_mux *superset)
 {
 	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
 		struct omap_mux *entry;
@@ -679,15 +927,16 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
 		}
 #else
 		/* Skip pins that are not muxed as GPIO by bootloader */
-		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
+		if (!OMAP_MODE_GPIO(omap_mux_read(partition,
+				    superset->reg_offset))) {
 			superset++;
 			continue;
 		}
 #endif
 
-		entry = omap_mux_list_add(superset);
+		entry = omap_mux_list_add(partition, superset);
 		if (!entry) {
-			printk(KERN_ERR "mux: Could not add entry\n");
+			pr_err("%s: Could not add entry\n", __func__);
 			return;
 		}
 		superset++;
@@ -706,10 +955,11 @@ static void omap_mux_init_package(struct omap_mux *superset,
 		omap_mux_package_init_balls(package_balls, superset);
 }
 
-static void omap_mux_init_signals(struct omap_board_mux *board_mux)
+static void omap_mux_init_signals(struct omap_mux_partition *partition,
+				  struct omap_board_mux *board_mux)
 {
 	omap_mux_set_cmdline_signals();
-	omap_mux_write_array(board_mux);
+	omap_mux_write_array(partition, board_mux);
 }
 
 #else
@@ -720,34 +970,49 @@ static void omap_mux_init_package(struct omap_mux *superset,
 {
 }
 
-static void omap_mux_init_signals(struct omap_board_mux *board_mux)
+static void omap_mux_init_signals(struct omap_mux_partition *partition,
+				  struct omap_board_mux *board_mux)
 {
 }
 
 #endif
 
-int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
-				struct omap_mux *superset,
-				struct omap_mux *package_subset,
-				struct omap_board_mux *board_mux,
-				struct omap_ball *package_balls)
-{
-	if (mux_base)
-		return -EBUSY;
+static u32 mux_partitions_cnt;
 
-	mux_phys = mux_pbase;
-	mux_base = ioremap(mux_pbase, mux_size);
-	if (!mux_base) {
-		printk(KERN_ERR "mux: Could not ioremap\n");
+int __init omap_mux_init(const char *name, u32 flags,
+			 u32 mux_pbase, u32 mux_size,
+			 struct omap_mux *superset,
+			 struct omap_mux *package_subset,
+			 struct omap_board_mux *board_mux,
+			 struct omap_ball *package_balls)
+{
+	struct omap_mux_partition *partition;
+
+	partition = kzalloc(sizeof(struct omap_mux_partition), GFP_KERNEL);
+	if (!partition)
+		return -ENOMEM;
+
+	partition->name = name;
+	partition->flags = flags;
+	partition->size = mux_size;
+	partition->phys = mux_pbase;
+	partition->base = ioremap(mux_pbase, mux_size);
+	if (!partition->base) {
+		pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
+			__func__, partition->phys);
 		return -ENODEV;
 	}
 
-	if (cpu_is_omap24xx())
-		omap_mux_flags = MUXABLE_GPIO_MODE3;
+	INIT_LIST_HEAD(&partition->muxmodes);
+
+	list_add_tail(&partition->node, &mux_partitions);
+	mux_partitions_cnt++;
+	pr_info("%s: Add partition: #%d: %s, flags: %x\n", __func__,
+		mux_partitions_cnt, partition->name, partition->flags);
 
 	omap_mux_init_package(superset, package_subset, package_balls);
-	omap_mux_init_list(superset);
-	omap_mux_init_signals(board_mux);
+	omap_mux_init_list(partition, superset);
+	omap_mux_init_signals(partition, board_mux);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 350c04f2738..a4ab17a737a 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2009 Nokia
- * Copyright (C) 2009 Texas Instruments
+ * Copyright (C) 2009-2010 Texas Instruments
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -10,6 +10,7 @@
 #include "mux2420.h"
 #include "mux2430.h"
 #include "mux34xx.h"
+#include "mux44xx.h"
 
 #define OMAP_MUX_TERMINATOR	0xffff
 
@@ -37,6 +38,9 @@
 #define OMAP_OFF_PULL_UP		(1 << 13)
 #define OMAP_WAKEUP_EN			(1 << 14)
 
+/* 44xx specific mux bit defines */
+#define OMAP_WAKEUP_EVENT		(1 << 15)
+
 /* Active pin states */
 #define OMAP_PIN_OUTPUT			0
 #define OMAP_PIN_INPUT			OMAP_INPUT_EN
@@ -56,8 +60,10 @@
 
 #define OMAP_MODE_GPIO(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
 
-/* Flags for omap_mux_init */
+/* Flags for omapX_mux_init */
 #define OMAP_PACKAGE_MASK		0xffff
+#define OMAP_PACKAGE_CBS		8		/* 547-pin 0.40 0.40 */
+#define OMAP_PACKAGE_CBL		7		/* 547-pin 0.40 0.40 */
 #define OMAP_PACKAGE_CBP		6		/* 515-pin 0.40 0.50 */
 #define OMAP_PACKAGE_CUS		5		/* 423-pin 0.65 */
 #define OMAP_PACKAGE_CBB		4		/* 515-pin 0.40 0.50 */
@@ -66,14 +72,61 @@
 #define OMAP_PACKAGE_ZAF		1		/* 2420 447-pin SIP */
 
 
-#define OMAP_MUX_NR_MODES	8			/* Available modes */
-#define OMAP_MUX_NR_SIDES	2			/* Bottom & top */
+#define OMAP_MUX_NR_MODES		8		/* Available modes */
+#define OMAP_MUX_NR_SIDES		2		/* Bottom & top */
+
+/*
+ * omap_mux_init flags definition:
+ *
+ * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits.
+ * The default value is 16 bits.
+ * OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3.
+ * The default is mode4.
+ */
+#define OMAP_MUX_REG_8BIT		(1 << 0)
+#define OMAP_MUX_GPIO_IN_MODE3		(1 << 1)
+
+/**
+ * struct omap_board_data - board specific device data
+ * @id: instance id
+ * @flags: additional flags for platform init code
+ * @pads: array of device specific pads
+ * @pads_cnt: ARRAY_SIZE() of pads
+ */
+struct omap_board_data {
+	int			id;
+	u32			flags;
+	struct omap_device_pad	*pads;
+	int			pads_cnt;
+};
+
+/**
+ * struct mux_partition - contain partition related information
+ * @name: name of the current partition
+ * @flags: flags specific to this partition
+ * @phys: physical address
+ * @size: partition size
+ * @base: virtual address after ioremap
+ * @muxmodes: list of nodes that belong to a partition
+ * @node: list node for the partitions linked list
+ */
+struct omap_mux_partition {
+	const char		*name;
+	u32			flags;
+	u32			phys;
+	u32			size;
+	void __iomem		*base;
+	struct list_head	muxmodes;
+	struct list_head	node;
+};
 
 /**
  * struct omap_mux - data for omap mux register offset and it's value
  * @reg_offset:	mux register offset from the mux base
  * @gpio:	GPIO number
  * @muxnames:	available signal modes for a ball
+ * @balls:	available balls on the package
+ * @partition:	mux partition
  */
 struct omap_mux {
 	u16	reg_offset;
@@ -106,6 +159,34 @@ struct omap_board_mux {
 	u16	value;
 };
 
+#define OMAP_DEVICE_PAD_ENABLED		BIT(7)	/* Not needed for board-*.c */
+#define OMAP_DEVICE_PAD_REMUX		BIT(1)	/* Dynamically remux a pad,
+						   needs enable, idle and off
+						   values */
+#define OMAP_DEVICE_PAD_WAKEUP		BIT(0)	/* Pad is wake-up capable */
+
+/**
+ * struct omap_device_pad - device specific pad configuration
+ * @name:		signal name
+ * @flags:		pad specific runtime flags
+ * @enable:		runtime value for a pad
+ * @idle:		idle value for a pad
+ * @off:		off value for a pad, defaults to safe mode
+ * @partition:		mux partition
+ * @mux:		mux register
+ */
+struct omap_device_pad {
+	char				*name;
+	u8				flags;
+	u16				enable;
+	u16				idle;
+	u16				off;
+	struct omap_mux_partition	*partition;
+	struct omap_mux			*mux;
+};
+
+struct omap_hwmod_mux_info;
+
 #if defined(CONFIG_OMAP_MUX)
 
 /**
@@ -122,6 +203,23 @@ int omap_mux_init_gpio(int gpio, int val);
  */
 int omap_mux_init_signal(const char *muxname, int val);
 
+/**
+ * omap_hwmod_mux_init - initialize hwmod specific mux data
+ * @bpads:		Board specific device signal names
+ * @nr_pads:		Number of signal names for the device
+ */
+extern struct omap_hwmod_mux_info *
+omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);
+
+/**
+ * omap_hwmod_mux - omap hwmod specific pin muxing
+ * @hmux:		Pads for a hwmod
+ * @state:		Desired _HWMOD_STATE
+ *
+ * Called only from omap_hwmod.c, do not use.
+ */
+void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
+
 #else
 
 static inline int omap_mux_init_gpio(int gpio, int val)
@@ -133,6 +231,18 @@ static inline int omap_mux_init_signal(char *muxname, int val)
 	return 0;
 }
 
+static inline struct omap_hwmod_mux_info *
+omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads)
+{
+	return NULL;
+}
+
+static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
+{
+}
+
+static struct omap_board_mux *board_mux __initdata __maybe_unused;
+
 #endif
 
 /**
@@ -151,28 +261,39 @@ u16 omap_mux_get_gpio(int gpio);
 void omap_mux_set_gpio(u16 val, int gpio);
 
 /**
+ * omap_mux_get() - get a mux partition by name
+ * @name:		Name of the mux partition
+ *
+ */
+struct omap_mux_partition *omap_mux_get(const char *name);
+
+/**
  * omap_mux_read() - read mux register
+ * @partition:		Mux partition
  * @mux_offset:		Offset of the mux register
  *
  */
-u16 omap_mux_read(u16 mux_offset);
+u16 omap_mux_read(struct omap_mux_partition *p, u16 mux_offset);
 
 /**
  * omap_mux_write() - write mux register
+ * @partition:		Mux partition
  * @val:		New mux register value
  * @mux_offset:		Offset of the mux register
  *
  * This should be only needed for dynamic remuxing of non-gpio signals.
  */
-void omap_mux_write(u16 val, u16 mux_offset);
+void omap_mux_write(struct omap_mux_partition *p, u16 val, u16 mux_offset);
 
 /**
  * omap_mux_write_array() - write an array of mux registers
+ * @partition:		Mux partition
  * @board_mux:		Array of mux registers terminated by MAP_MUX_TERMINATOR
  *
  * This should be only needed for dynamic remuxing of non-gpio signals.
  */
-void omap_mux_write_array(struct omap_board_mux *board_mux);
+void omap_mux_write_array(struct omap_mux_partition *p,
+			  struct omap_board_mux *board_mux);
 
 /**
  * omap2420_mux_init() - initialize mux system with board specific set
@@ -196,10 +317,19 @@ int omap2430_mux_init(struct omap_board_mux *board_mux, int flags);
 int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
 
 /**
+ * omap4_mux_init() - initialize mux system with board specific set
+ * @board_mux:		Board specific mux table
+ * @flags:		OMAP package type used for the board
+ */
+int omap4_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
  * omap_mux_init - private mux init function, do not call
  */
-int omap_mux_init(u32 mux_pbase, u32 mux_size,
-				struct omap_mux *superset,
-				struct omap_mux *package_subset,
-				struct omap_board_mux *board_mux,
-				struct omap_ball *package_balls);
+int omap_mux_init(const char *name, u32 flags,
+		  u32 mux_pbase, u32 mux_size,
+		  struct omap_mux *superset,
+		  struct omap_mux *package_subset,
+		  struct omap_board_mux *board_mux,
+		  struct omap_ball *package_balls);
+
diff --git a/arch/arm/mach-omap2/mux2420.c b/arch/arm/mach-omap2/mux2420.c
index 414af543445..cf6de0971c6 100644
--- a/arch/arm/mach-omap2/mux2420.c
+++ b/arch/arm/mach-omap2/mux2420.c
@@ -678,11 +678,13 @@ int __init omap2420_mux_init(struct omap_board_mux *board_subset, int flags)
 	case OMAP_PACKAGE_ZAF:
 		/* REVISIT: Please add data */
 	default:
-		pr_warning("mux: No ball data available for omap2420 package\n");
+		pr_warning("%s: No ball data available for omap2420 package\n",
+				__func__);
 	}
 
-	return omap_mux_init(OMAP2420_CONTROL_PADCONF_MUX_PBASE,
+	return omap_mux_init("core", OMAP_MUX_REG_8BIT | OMAP_MUX_GPIO_IN_MODE3,
+			     OMAP2420_CONTROL_PADCONF_MUX_PBASE,
 			     OMAP2420_CONTROL_PADCONF_MUX_SIZE,
-				omap2420_muxmodes, NULL, board_subset,
-				package_balls);
+			     omap2420_muxmodes, NULL, board_subset,
+			     package_balls);
 }
diff --git a/arch/arm/mach-omap2/mux2430.c b/arch/arm/mach-omap2/mux2430.c
index 84d2c5a7ecd..4185f92553d 100644
--- a/arch/arm/mach-omap2/mux2430.c
+++ b/arch/arm/mach-omap2/mux2430.c
@@ -781,11 +781,13 @@ int __init omap2430_mux_init(struct omap_board_mux *board_subset, int flags)
 		package_balls = omap2430_pop_ball;
 		break;
 	default:
-		pr_warning("mux: No ball data available for omap2420 package\n");
+		pr_warning("%s: No ball data available for omap2420 package\n",
+				__func__);
 	}
 
-	return omap_mux_init(OMAP2430_CONTROL_PADCONF_MUX_PBASE,
+	return omap_mux_init("core", OMAP_MUX_REG_8BIT | OMAP_MUX_GPIO_IN_MODE3,
+			     OMAP2430_CONTROL_PADCONF_MUX_PBASE,
 			     OMAP2430_CONTROL_PADCONF_MUX_SIZE,
-				omap2430_muxmodes, NULL, board_subset,
-				package_balls);
+			     omap2430_muxmodes, NULL, board_subset,
+			     package_balls);
 }
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 574e54ea3ab..440c98e9a51 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -2049,12 +2049,13 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
 		package_balls = omap36xx_cbp_ball;
 		break;
 	default:
-		printk(KERN_ERR "mux: Unknown omap package, mux disabled\n");
+		pr_err("%s Unknown omap package, mux disabled\n", __func__);
 		return -EINVAL;
 	}
 
-	return omap_mux_init(OMAP3_CONTROL_PADCONF_MUX_PBASE,
+	return omap_mux_init("core", 0,
+			     OMAP3_CONTROL_PADCONF_MUX_PBASE,
 			     OMAP3_CONTROL_PADCONF_MUX_SIZE,
-				omap3_muxmodes, package_subset, board_subset,
-				package_balls);
+			     omap3_muxmodes, package_subset, board_subset,
+			     package_balls);
 }
diff --git a/arch/arm/mach-omap2/mux44xx.c b/arch/arm/mach-omap2/mux44xx.c
new file mode 100644
index 00000000000..980f11d45c7
--- /dev/null
+++ b/arch/arm/mach-omap2/mux44xx.c
@@ -0,0 +1,1625 @@
+/*
+ * OMAP44xx ES1.0 pin mux definition
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * - Based on mux34xx.c done by Tony Lindgren <tony@atomide.com>
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP4_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)	\
+{									\
+	.reg_offset	= (OMAP4_CTRL_MODULE_PAD_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
+}
+
+#else
+
+#define _OMAP4_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)	\
+{									\
+	.reg_offset	= (OMAP4_CTRL_MODULE_PAD_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+}
+
+#endif
+
+#define _OMAP4_BALLENTRY(M0, bb, bt)				\
+{									\
+	.reg_offset	= (OMAP4_CTRL_MODULE_PAD_##M0##_OFFSET),	\
+	.balls		= { bb, bt },					\
+}
+
+/*
+ * Superset of all mux modes for omap4 ES1.0
+ */
+static struct omap_mux __initdata omap4_core_muxmodes[] = {
+	_OMAP4_MUXENTRY(GPMC_AD0, 0, "gpmc_ad0", "sdmmc2_dat0", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD1, 0, "gpmc_ad1", "sdmmc2_dat1", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD2, 0, "gpmc_ad2", "sdmmc2_dat2", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD3, 0, "gpmc_ad3", "sdmmc2_dat3", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD4, 0, "gpmc_ad4", "sdmmc2_dat4",
+			"sdmmc2_dir_dat0", NULL, NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD5, 0, "gpmc_ad5", "sdmmc2_dat5",
+			"sdmmc2_dir_dat1", NULL, NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD6, 0, "gpmc_ad6", "sdmmc2_dat6",
+			"sdmmc2_dir_cmd", NULL, NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD7, 0, "gpmc_ad7", "sdmmc2_dat7",
+			"sdmmc2_clk_fdbk", NULL, NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD8, 32, "gpmc_ad8", "kpd_row0", "c2c_data15",
+			"gpio_32", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD9, 33, "gpmc_ad9", "kpd_row1", "c2c_data14",
+			"gpio_33", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD10, 34, "gpmc_ad10", "kpd_row2", "c2c_data13",
+			"gpio_34", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD11, 35, "gpmc_ad11", "kpd_row3", "c2c_data12",
+			"gpio_35", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD12, 36, "gpmc_ad12", "kpd_col0", "c2c_data11",
+			"gpio_36", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD13, 37, "gpmc_ad13", "kpd_col1", "c2c_data10",
+			"gpio_37", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD14, 38, "gpmc_ad14", "kpd_col2", "c2c_data9",
+			"gpio_38", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD15, 39, "gpmc_ad15", "kpd_col3", "c2c_data8",
+			"gpio_39", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_A16, 40, "gpmc_a16", "kpd_row4", "c2c_datain0",
+			"gpio_40", "venc_656_data0", NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_A17, 41, "gpmc_a17", "kpd_row5", "c2c_datain1",
+			"gpio_41", "venc_656_data1", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A18, 42, "gpmc_a18", "kpd_row6", "c2c_datain2",
+			"gpio_42", "venc_656_data2", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A19, 43, "gpmc_a19", "kpd_row7", "c2c_datain3",
+			"gpio_43", "venc_656_data3", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A20, 44, "gpmc_a20", "kpd_col4", "c2c_datain4",
+			"gpio_44", "venc_656_data4", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A21, 45, "gpmc_a21", "kpd_col5", "c2c_datain5",
+			"gpio_45", "venc_656_data5", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A22, 46, "gpmc_a22", "kpd_col6", "c2c_datain6",
+			"gpio_46", "venc_656_data6", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A23, 47, "gpmc_a23", "kpd_col7", "c2c_datain7",
+			"gpio_47", "venc_656_data7", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A24, 48, "gpmc_a24", NULL, "c2c_clkout0",
+			"gpio_48", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A25, 49, "gpmc_a25", NULL, "c2c_clkout1",
+			"gpio_49", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NCS0, 50, "gpmc_ncs0", NULL, NULL, "gpio_50",
+			"sys_ndmareq0", NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NCS1, 51, "gpmc_ncs1", NULL, "c2c_dataout6",
+			"gpio_51", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NCS2, 52, "gpmc_ncs2", NULL, "c2c_dataout7",
+			"gpio_52", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NCS3, 53, "gpmc_ncs3", "gpmc_dir",
+			"c2c_dataout4", "gpio_53", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NWP, 54, "gpmc_nwp", "dsi1_te0", NULL, "gpio_54",
+			"sys_ndmareq1", NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_CLK, 55, "gpmc_clk", NULL, NULL, "gpio_55",
+			"sys_ndmareq2", NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NADV_ALE, 56, "gpmc_nadv_ale", "dsi1_te1", NULL,
+			"gpio_56", "sys_ndmareq3", NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NOE, 0, "gpmc_noe", "sdmmc2_clk", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NWE, 0, "gpmc_nwe", "sdmmc2_cmd", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NBE0_CLE, 59, "gpmc_nbe0_cle", "dsi2_te0", NULL,
+			"gpio_59", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NBE1, 60, "gpmc_nbe1", NULL, "c2c_dataout5",
+			"gpio_60", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_WAIT0, 61, "gpmc_wait0", "dsi2_te1", NULL,
+			"gpio_61", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_WAIT1, 62, "gpmc_wait1", NULL, "c2c_dataout2",
+			"gpio_62", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(C2C_DATA11, 100, "c2c_data11", "usbc1_icusb_txen",
+			"c2c_dataout3", "gpio_100", "sys_ndmareq0", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(C2C_DATA12, 101, "c2c_data12", "dsi1_te0",
+			"c2c_clkin0", "gpio_101", "sys_ndmareq1", NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(C2C_DATA13, 102, "c2c_data13", "dsi1_te1",
+			"c2c_clkin1", "gpio_102", "sys_ndmareq2", NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(C2C_DATA14, 103, "c2c_data14", "dsi2_te0",
+			"c2c_dataout0", "gpio_103", "sys_ndmareq3", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(C2C_DATA15, 104, "c2c_data15", "dsi2_te1",
+			"c2c_dataout1", "gpio_104", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(HDMI_HPD, 63, "hdmi_hpd", NULL, NULL, "gpio_63", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(HDMI_CEC, 64, "hdmi_cec", NULL, NULL, "gpio_64", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(HDMI_DDC_SCL, 65, "hdmi_ddc_scl", NULL, NULL,
+			"gpio_65", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(HDMI_DDC_SDA, 66, "hdmi_ddc_sda", NULL, NULL,
+			"gpio_66", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DX0, 0, "csi21_dx0", NULL, NULL, "gpi_67", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DY0, 0, "csi21_dy0", NULL, NULL, "gpi_68", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DX1, 0, "csi21_dx1", NULL, NULL, "gpi_69", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DY1, 0, "csi21_dy1", NULL, NULL, "gpi_70", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DX2, 0, "csi21_dx2", NULL, NULL, "gpi_71", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DY2, 0, "csi21_dy2", NULL, NULL, "gpi_72", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DX3, 0, "csi21_dx3", NULL, NULL, "gpi_73", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DY3, 0, "csi21_dy3", NULL, NULL, "gpi_74", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DX4, 0, "csi21_dx4", NULL, NULL, "gpi_75", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DY4, 0, "csi21_dy4", NULL, NULL, "gpi_76", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI22_DX0, 0, "csi22_dx0", NULL, NULL, "gpi_77", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI22_DY0, 0, "csi22_dy0", NULL, NULL, "gpi_78", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI22_DX1, 0, "csi22_dx1", NULL, NULL, "gpi_79", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI22_DY1, 0, "csi22_dy1", NULL, NULL, "gpi_80", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CAM_SHUTTER, 81, "cam_shutter", NULL, NULL, "gpio_81",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CAM_STROBE, 82, "cam_strobe", NULL, NULL, "gpio_82",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CAM_GLOBALRESET, 83, "cam_globalreset", NULL, NULL,
+			"gpio_83", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_CLK, 84, "usbb1_ulpitll_clk",
+			"hsi1_cawake", NULL, "gpio_84", "usbb1_ulpiphy_clk",
+			NULL, "hw_dbg20", "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_STP, 85, "usbb1_ulpitll_stp",
+			"hsi1_cadata", "mcbsp4_clkr", "gpio_85",
+			"usbb1_ulpiphy_stp", "usbb1_mm_rxdp", "hw_dbg21",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DIR, 86, "usbb1_ulpitll_dir",
+			"hsi1_caflag", "mcbsp4_fsr", "gpio_86",
+			"usbb1_ulpiphy_dir", NULL, "hw_dbg22", "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_NXT, 87, "usbb1_ulpitll_nxt",
+			"hsi1_acready", "mcbsp4_fsx", "gpio_87",
+			"usbb1_ulpiphy_nxt", "usbb1_mm_rxdm", "hw_dbg23",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT0, 88, "usbb1_ulpitll_dat0",
+			"hsi1_acwake", "mcbsp4_clkx", "gpio_88",
+			"usbb1_ulpiphy_dat0", "usbb1_mm_rxrcv", "hw_dbg24",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT1, 89, "usbb1_ulpitll_dat1",
+			"hsi1_acdata", "mcbsp4_dx", "gpio_89",
+			"usbb1_ulpiphy_dat1", "usbb1_mm_txse0", "hw_dbg25",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT2, 90, "usbb1_ulpitll_dat2",
+			"hsi1_acflag", "mcbsp4_dr", "gpio_90",
+			"usbb1_ulpiphy_dat2", "usbb1_mm_txdat", "hw_dbg26",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT3, 91, "usbb1_ulpitll_dat3",
+			"hsi1_caready", NULL, "gpio_91", "usbb1_ulpiphy_dat3",
+			"usbb1_mm_txen", "hw_dbg27", "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT4, 92, "usbb1_ulpitll_dat4",
+			"dmtimer8_pwm_evt", "abe_mcbsp3_dr", "gpio_92",
+			"usbb1_ulpiphy_dat4", NULL, "hw_dbg28", "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT5, 93, "usbb1_ulpitll_dat5",
+			"dmtimer9_pwm_evt", "abe_mcbsp3_dx", "gpio_93",
+			"usbb1_ulpiphy_dat5", NULL, "hw_dbg29", "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT6, 94, "usbb1_ulpitll_dat6",
+			"dmtimer10_pwm_evt", "abe_mcbsp3_clkx", "gpio_94",
+			"usbb1_ulpiphy_dat6", "abe_dmic_din3", "hw_dbg30",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT7, 95, "usbb1_ulpitll_dat7",
+			"dmtimer11_pwm_evt", "abe_mcbsp3_fsx", "gpio_95",
+			"usbb1_ulpiphy_dat7", "abe_dmic_clk3", "hw_dbg31",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_HSIC_DATA, 96, "usbb1_hsic_data", NULL, NULL,
+			"gpio_96", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_HSIC_STROBE, 97, "usbb1_hsic_strobe", NULL,
+			NULL, "gpio_97", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBC1_ICUSB_DP, 98, "usbc1_icusb_dp", NULL, NULL,
+			"gpio_98", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBC1_ICUSB_DM, 99, "usbc1_icusb_dm", NULL, NULL,
+			"gpio_99", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_CLK, 100, "sdmmc1_clk", NULL, "dpm_emu19",
+			"gpio_100", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_CMD, 101, "sdmmc1_cmd", NULL, "uart1_rx",
+			"gpio_101", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT0, 102, "sdmmc1_dat0", NULL, "dpm_emu18",
+			"gpio_102", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT1, 103, "sdmmc1_dat1", NULL, "dpm_emu17",
+			"gpio_103", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT2, 104, "sdmmc1_dat2", NULL, "dpm_emu16",
+			"gpio_104", "jtag_tms_tmsc", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT3, 105, "sdmmc1_dat3", NULL, "dpm_emu15",
+			"gpio_105", "jtag_tck", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT4, 106, "sdmmc1_dat4", NULL, NULL,
+			"gpio_106", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT5, 107, "sdmmc1_dat5", NULL, NULL,
+			"gpio_107", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT6, 108, "sdmmc1_dat6", NULL, NULL,
+			"gpio_108", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT7, 109, "sdmmc1_dat7", NULL, NULL,
+			"gpio_109", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP2_CLKX, 110, "abe_mcbsp2_clkx", "mcspi2_clk",
+			"abe_mcasp_ahclkx", "gpio_110", "usbb2_mm_rxdm",
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP2_DR, 111, "abe_mcbsp2_dr", "mcspi2_somi",
+			"abe_mcasp_axr", "gpio_111", "usbb2_mm_rxdp", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP2_DX, 112, "abe_mcbsp2_dx", "mcspi2_simo",
+			"abe_mcasp_amute", "gpio_112", "usbb2_mm_rxrcv", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP2_FSX, 113, "abe_mcbsp2_fsx", "mcspi2_cs0",
+			"abe_mcasp_afsx", "gpio_113", "usbb2_mm_txen", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP1_CLKX, 114, "abe_mcbsp1_clkx",
+			"abe_slimbus1_clock", NULL, "gpio_114", NULL, NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP1_DR, 115, "abe_mcbsp1_dr",
+			"abe_slimbus1_data", NULL, "gpio_115", NULL, NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP1_DX, 116, "abe_mcbsp1_dx", "sdmmc3_dat2",
+			"abe_mcasp_aclkx", "gpio_116", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP1_FSX, 117, "abe_mcbsp1_fsx", "sdmmc3_dat3",
+			"abe_mcasp_amutein", "gpio_117", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_PDM_UL_DATA, 0, "abe_pdm_ul_data",
+			"abe_mcbsp3_dr", NULL, NULL, NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_PDM_DL_DATA, 0, "abe_pdm_dl_data",
+			"abe_mcbsp3_dx", NULL, NULL, NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_PDM_FRAME, 0, "abe_pdm_frame", "abe_mcbsp3_clkx",
+			NULL, NULL, NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_PDM_LB_CLK, 0, "abe_pdm_lb_clk", "abe_mcbsp3_fsx",
+			NULL, NULL, NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_CLKS, 118, "abe_clks", NULL, NULL, "gpio_118",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_DMIC_CLK1, 119, "abe_dmic_clk1", NULL, NULL,
+			"gpio_119", "usbb2_mm_txse0", NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_DMIC_DIN1, 120, "abe_dmic_din1", NULL, NULL,
+			"gpio_120", "usbb2_mm_txdat", NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_DMIC_DIN2, 121, "abe_dmic_din2", "slimbus2_clock",
+			NULL, "gpio_121", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_DMIC_DIN3, 122, "abe_dmic_din3", "slimbus2_data",
+			"abe_dmic_clk2", "gpio_122", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(UART2_CTS, 123, "uart2_cts", "sdmmc3_clk", NULL,
+			"gpio_123", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART2_RTS, 124, "uart2_rts", "sdmmc3_cmd", NULL,
+			"gpio_124", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART2_RX, 125, "uart2_rx", "sdmmc3_dat0", NULL,
+			"gpio_125", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART2_TX, 126, "uart2_tx", "sdmmc3_dat1", NULL,
+			"gpio_126", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(HDQ_SIO, 127, "hdq_sio", "i2c3_sccb", "i2c2_sccb",
+			"gpio_127", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C1_SCL, 0, "i2c1_scl", NULL, NULL, NULL, NULL, NULL,
+			NULL, NULL),
+	_OMAP4_MUXENTRY(I2C1_SDA, 0, "i2c1_sda", NULL, NULL, NULL, NULL, NULL,
+			NULL, NULL),
+	_OMAP4_MUXENTRY(I2C2_SCL, 128, "i2c2_scl", "uart1_rx", NULL,
+			"gpio_128", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C2_SDA, 129, "i2c2_sda", "uart1_tx", NULL,
+			"gpio_129", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C3_SCL, 130, "i2c3_scl", NULL, NULL, "gpio_130",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C3_SDA, 131, "i2c3_sda", NULL, NULL, "gpio_131",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C4_SCL, 132, "i2c4_scl", NULL, NULL, "gpio_132",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C4_SDA, 133, "i2c4_sda", NULL, NULL, "gpio_133",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_CLK, 134, "mcspi1_clk", NULL, NULL, "gpio_134",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_SOMI, 135, "mcspi1_somi", NULL, NULL,
+			"gpio_135", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_SIMO, 136, "mcspi1_simo", NULL, NULL,
+			"gpio_136", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_CS0, 137, "mcspi1_cs0", NULL, NULL, "gpio_137",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_CS1, 138, "mcspi1_cs1", "uart1_rx", NULL,
+			"gpio_138", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_CS2, 139, "mcspi1_cs2", "uart1_cts",
+			"slimbus2_clock", "gpio_139", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_CS3, 140, "mcspi1_cs3", "uart1_rts",
+			"slimbus2_data", "gpio_140", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(UART3_CTS_RCTX, 141, "uart3_cts_rctx", "uart1_tx",
+			NULL, "gpio_141", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART3_RTS_SD, 142, "uart3_rts_sd", NULL, NULL,
+			"gpio_142", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART3_RX_IRRX, 143, "uart3_rx_irrx",
+			"dmtimer8_pwm_evt", NULL, "gpio_143", NULL, NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART3_TX_IRTX, 144, "uart3_tx_irtx",
+			"dmtimer9_pwm_evt", NULL, "gpio_144", NULL, NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_CLK, 145, "sdmmc5_clk", "mcspi2_clk",
+			"usbc1_icusb_dp", "gpio_145", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_CMD, 146, "sdmmc5_cmd", "mcspi2_simo",
+			"usbc1_icusb_dm", "gpio_146", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_DAT0, 147, "sdmmc5_dat0", "mcspi2_somi",
+			"usbc1_icusb_rcv", "gpio_147", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_DAT1, 148, "sdmmc5_dat1", NULL,
+			"usbc1_icusb_txen", "gpio_148", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_DAT2, 149, "sdmmc5_dat2", "mcspi2_cs1", NULL,
+			"gpio_149", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_DAT3, 150, "sdmmc5_dat3", "mcspi2_cs0", NULL,
+			"gpio_150", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI4_CLK, 151, "mcspi4_clk", "sdmmc4_clk", NULL,
+			"gpio_151", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI4_SIMO, 152, "mcspi4_simo", "sdmmc4_cmd", NULL,
+			"gpio_152", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI4_SOMI, 153, "mcspi4_somi", "sdmmc4_dat0", NULL,
+			"gpio_153", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI4_CS0, 154, "mcspi4_cs0", "sdmmc4_dat3", NULL,
+			"gpio_154", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART4_RX, 155, "uart4_rx", "sdmmc4_dat2", NULL,
+			"gpio_155", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART4_TX, 156, "uart4_tx", "sdmmc4_dat1", NULL,
+			"gpio_156", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_CLK, 157, "usbb2_ulpitll_clk",
+			"usbb2_ulpiphy_clk", "sdmmc4_cmd", "gpio_157",
+			"hsi2_cawake", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_STP, 158, "usbb2_ulpitll_stp",
+			"usbb2_ulpiphy_stp", "sdmmc4_clk", "gpio_158",
+			"hsi2_cadata", "dispc2_data23", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DIR, 159, "usbb2_ulpitll_dir",
+			"usbb2_ulpiphy_dir", "sdmmc4_dat0", "gpio_159",
+			"hsi2_caflag", "dispc2_data22", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_NXT, 160, "usbb2_ulpitll_nxt",
+			"usbb2_ulpiphy_nxt", "sdmmc4_dat1", "gpio_160",
+			"hsi2_acready", "dispc2_data21", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT0, 161, "usbb2_ulpitll_dat0",
+			"usbb2_ulpiphy_dat0", "sdmmc4_dat2", "gpio_161",
+			"hsi2_acwake", "dispc2_data20", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT1, 162, "usbb2_ulpitll_dat1",
+			"usbb2_ulpiphy_dat1", "sdmmc4_dat3", "gpio_162",
+			"hsi2_acdata", "dispc2_data19", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT2, 163, "usbb2_ulpitll_dat2",
+			"usbb2_ulpiphy_dat2", "sdmmc3_dat2", "gpio_163",
+			"hsi2_acflag", "dispc2_data18", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT3, 164, "usbb2_ulpitll_dat3",
+			"usbb2_ulpiphy_dat3", "sdmmc3_dat1", "gpio_164",
+			"hsi2_caready", "dispc2_data15", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT4, 165, "usbb2_ulpitll_dat4",
+			"usbb2_ulpiphy_dat4", "sdmmc3_dat0", "gpio_165",
+			"mcspi3_somi", "dispc2_data14", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT5, 166, "usbb2_ulpitll_dat5",
+			"usbb2_ulpiphy_dat5", "sdmmc3_dat3", "gpio_166",
+			"mcspi3_cs0", "dispc2_data13", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT6, 167, "usbb2_ulpitll_dat6",
+			"usbb2_ulpiphy_dat6", "sdmmc3_cmd", "gpio_167",
+			"mcspi3_simo", "dispc2_data12", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT7, 168, "usbb2_ulpitll_dat7",
+			"usbb2_ulpiphy_dat7", "sdmmc3_clk", "gpio_168",
+			"mcspi3_clk", "dispc2_data11", NULL, "reserved"),
+	_OMAP4_MUXENTRY(USBB2_HSIC_DATA, 169, "usbb2_hsic_data", NULL, NULL,
+			"gpio_169", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_HSIC_STROBE, 170, "usbb2_hsic_strobe", NULL,
+			NULL, "gpio_170", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_TX0, 171, "unipro_tx0", "kpd_col0", NULL,
+			"gpio_171", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_TY0, 172, "unipro_ty0", "kpd_col1", NULL,
+			"gpio_172", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_TX1, 173, "unipro_tx1", "kpd_col2", NULL,
+			"gpio_173", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_TY1, 174, "unipro_ty1", "kpd_col3", NULL,
+			"gpio_174", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_TX2, 0, "unipro_tx2", "kpd_col4", NULL,
+			"gpio_0", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_TY2, 1, "unipro_ty2", "kpd_col5", NULL,
+			"gpio_1", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_RX0, 0, "unipro_rx0", "kpd_row0", NULL,
+			"gpi_175", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_RY0, 0, "unipro_ry0", "kpd_row1", NULL,
+			"gpi_176", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_RX1, 0, "unipro_rx1", "kpd_row2", NULL,
+			"gpi_177", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_RY1, 0, "unipro_ry1", "kpd_row3", NULL,
+			"gpi_178", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_RX2, 0, "unipro_rx2", "kpd_row4", NULL,
+			"gpi_2", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UNIPRO_RY2, 0, "unipro_ry2", "kpd_row5", NULL,
+			"gpi_3", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBA0_OTG_CE, 0, "usba0_otg_ce", NULL, NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(USBA0_OTG_DP, 179, "usba0_otg_dp", "uart3_rx_irrx",
+			"uart2_rx", "gpio_179", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBA0_OTG_DM, 180, "usba0_otg_dm", "uart3_tx_irtx",
+			"uart2_tx", "gpio_180", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(FREF_CLK1_OUT, 181, "fref_clk1_out", NULL, NULL,
+			"gpio_181", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(FREF_CLK2_OUT, 182, "fref_clk2_out", NULL, NULL,
+			"gpio_182", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_NIRQ1, 0, "sys_nirq1", NULL, NULL, NULL, NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_NIRQ2, 183, "sys_nirq2", NULL, NULL, "gpio_183",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT0, 184, "sys_boot0", NULL, NULL, "gpio_184",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT1, 185, "sys_boot1", NULL, NULL, "gpio_185",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT2, 186, "sys_boot2", NULL, NULL, "gpio_186",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT3, 187, "sys_boot3", NULL, NULL, "gpio_187",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT4, 188, "sys_boot4", NULL, NULL, "gpio_188",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT5, 189, "sys_boot5", NULL, NULL, "gpio_189",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU0, 11, "dpm_emu0", NULL, NULL, "gpio_11", NULL,
+			NULL, "hw_dbg0", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU1, 12, "dpm_emu1", NULL, NULL, "gpio_12", NULL,
+			NULL, "hw_dbg1", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU2, 13, "dpm_emu2", "usba0_ulpiphy_clk", NULL,
+			"gpio_13", NULL, "dispc2_fid", "hw_dbg2", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU3, 14, "dpm_emu3", "usba0_ulpiphy_stp", NULL,
+			"gpio_14", NULL, "dispc2_data10", "hw_dbg3",
+			"reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU4, 15, "dpm_emu4", "usba0_ulpiphy_dir", NULL,
+			"gpio_15", NULL, "dispc2_data9", "hw_dbg4",
+			"reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU5, 16, "dpm_emu5", "usba0_ulpiphy_nxt", NULL,
+			"gpio_16", "rfbi_te_vsync0", "dispc2_data16",
+			"hw_dbg5", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU6, 17, "dpm_emu6", "usba0_ulpiphy_dat0",
+			"uart3_tx_irtx", "gpio_17", "rfbi_hsync0",
+			"dispc2_data17", "hw_dbg6", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU7, 18, "dpm_emu7", "usba0_ulpiphy_dat1",
+			"uart3_rx_irrx", "gpio_18", "rfbi_cs0",
+			"dispc2_hsync", "hw_dbg7", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU8, 19, "dpm_emu8", "usba0_ulpiphy_dat2",
+			"uart3_rts_sd", "gpio_19", "rfbi_re", "dispc2_pclk",
+			"hw_dbg8", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU9, 20, "dpm_emu9", "usba0_ulpiphy_dat3",
+			"uart3_cts_rctx", "gpio_20", "rfbi_we",
+			"dispc2_vsync", "hw_dbg9", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU10, 21, "dpm_emu10", "usba0_ulpiphy_dat4",
+			NULL, "gpio_21", "rfbi_a0", "dispc2_de", "hw_dbg10",
+			"reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU11, 22, "dpm_emu11", "usba0_ulpiphy_dat5",
+			NULL, "gpio_22", "rfbi_data8", "dispc2_data8",
+			"hw_dbg11", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU12, 23, "dpm_emu12", "usba0_ulpiphy_dat6",
+			NULL, "gpio_23", "rfbi_data7", "dispc2_data7",
+			"hw_dbg12", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU13, 24, "dpm_emu13", "usba0_ulpiphy_dat7",
+			NULL, "gpio_24", "rfbi_data6", "dispc2_data6",
+			"hw_dbg13", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU14, 25, "dpm_emu14", "sys_drm_msecure",
+			"uart1_rx", "gpio_25", "rfbi_data5", "dispc2_data5",
+			"hw_dbg14", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU15, 26, "dpm_emu15", "sys_secure_indicator",
+			NULL, "gpio_26", "rfbi_data4", "dispc2_data4",
+			"hw_dbg15", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU16, 27, "dpm_emu16", "dmtimer8_pwm_evt",
+			"dsi1_te0", "gpio_27", "rfbi_data3", "dispc2_data3",
+			"hw_dbg16", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU17, 28, "dpm_emu17", "dmtimer9_pwm_evt",
+			"dsi1_te1", "gpio_28", "rfbi_data2", "dispc2_data2",
+			"hw_dbg17", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU18, 190, "dpm_emu18", "dmtimer10_pwm_evt",
+			"dsi2_te0", "gpio_190", "rfbi_data1", "dispc2_data1",
+			"hw_dbg18", "reserved"),
+	_OMAP4_MUXENTRY(DPM_EMU19, 191, "dpm_emu19", "dmtimer11_pwm_evt",
+			"dsi2_te1", "gpio_191", "rfbi_data0", "dispc2_data0",
+			"hw_dbg19", "reserved"),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for 44XX CBL package
+ * 547-pin CBL ES1.0 S-FPGA-N547, 0.40mm Ball Pitch (Top),
+ *				  0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
+		&& defined(CONFIG_OMAP_PACKAGE_CBL)
+struct omap_ball __initdata omap4_core_cbl_ball[] = {
+	_OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD3, "d13", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD4, "c15", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD5, "d15", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD6, "a16", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD7, "b16", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD8, "c16", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD9, "d16", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD10, "c17", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD11, "d17", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD12, "c18", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD13, "d18", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD14, "c19", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD15, "d19", NULL),
+	_OMAP4_BALLENTRY(GPMC_A16, "b17", NULL),
+	_OMAP4_BALLENTRY(GPMC_A17, "a18", NULL),
+	_OMAP4_BALLENTRY(GPMC_A18, "b18", NULL),
+	_OMAP4_BALLENTRY(GPMC_A19, "a19", NULL),
+	_OMAP4_BALLENTRY(GPMC_A20, "b19", NULL),
+	_OMAP4_BALLENTRY(GPMC_A21, "b20", NULL),
+	_OMAP4_BALLENTRY(GPMC_A22, "a21", NULL),
+	_OMAP4_BALLENTRY(GPMC_A23, "b21", NULL),
+	_OMAP4_BALLENTRY(GPMC_A24, "c20", NULL),
+	_OMAP4_BALLENTRY(GPMC_A25, "d20", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS0, "b25", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS1, "c21", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS2, "d21", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS3, "c22", NULL),
+	_OMAP4_BALLENTRY(GPMC_NWP, "c25", NULL),
+	_OMAP4_BALLENTRY(GPMC_CLK, "b22", NULL),
+	_OMAP4_BALLENTRY(GPMC_NADV_ALE, "d25", NULL),
+	_OMAP4_BALLENTRY(GPMC_NOE, "b11", NULL),
+	_OMAP4_BALLENTRY(GPMC_NWE, "b12", NULL),
+	_OMAP4_BALLENTRY(GPMC_NBE0_CLE, "c23", NULL),
+	_OMAP4_BALLENTRY(GPMC_NBE1, "d22", NULL),
+	_OMAP4_BALLENTRY(GPMC_WAIT0, "b26", NULL),
+	_OMAP4_BALLENTRY(GPMC_WAIT1, "b23", NULL),
+	_OMAP4_BALLENTRY(C2C_DATA11, "d23", NULL),
+	_OMAP4_BALLENTRY(C2C_DATA12, "a24", NULL),
+	_OMAP4_BALLENTRY(C2C_DATA13, "b24", NULL),
+	_OMAP4_BALLENTRY(C2C_DATA14, "c24", NULL),
+	_OMAP4_BALLENTRY(C2C_DATA15, "d24", NULL),
+	_OMAP4_BALLENTRY(HDMI_HPD, "b9", NULL),
+	_OMAP4_BALLENTRY(HDMI_CEC, "b10", NULL),
+	_OMAP4_BALLENTRY(HDMI_DDC_SCL, "a8", NULL),
+	_OMAP4_BALLENTRY(HDMI_DDC_SDA, "b8", NULL),
+	_OMAP4_BALLENTRY(CSI21_DX0, "r26", NULL),
+	_OMAP4_BALLENTRY(CSI21_DY0, "r25", NULL),
+	_OMAP4_BALLENTRY(CSI21_DX1, "t26", NULL),
+	_OMAP4_BALLENTRY(CSI21_DY1, "t25", NULL),
+	_OMAP4_BALLENTRY(CSI21_DX2, "u26", NULL),
+	_OMAP4_BALLENTRY(CSI21_DY2, "u25", NULL),
+	_OMAP4_BALLENTRY(CSI21_DX3, "v26", NULL),
+	_OMAP4_BALLENTRY(CSI21_DY3, "v25", NULL),
+	_OMAP4_BALLENTRY(CSI21_DX4, "w26", NULL),
+	_OMAP4_BALLENTRY(CSI21_DY4, "w25", NULL),
+	_OMAP4_BALLENTRY(CSI22_DX0, "m26", NULL),
+	_OMAP4_BALLENTRY(CSI22_DY0, "m25", NULL),
+	_OMAP4_BALLENTRY(CSI22_DX1, "n26", NULL),
+	_OMAP4_BALLENTRY(CSI22_DY1, "n25", NULL),
+	_OMAP4_BALLENTRY(CAM_SHUTTER, "t27", NULL),
+	_OMAP4_BALLENTRY(CAM_STROBE, "u27", NULL),
+	_OMAP4_BALLENTRY(CAM_GLOBALRESET, "v27", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_CLK, "ae18", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_STP, "ag19", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DIR, "af19", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_NXT, "ae19", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT0, "af18", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT1, "ag18", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT2, "ae17", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT3, "af17", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT4, "ah17", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT5, "ae16", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT6, "af16", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT7, "ag16", NULL),
+	_OMAP4_BALLENTRY(USBB1_HSIC_DATA, "af14", NULL),
+	_OMAP4_BALLENTRY(USBB1_HSIC_STROBE, "ae14", NULL),
+	_OMAP4_BALLENTRY(USBC1_ICUSB_DP, "h2", NULL),
+	_OMAP4_BALLENTRY(USBC1_ICUSB_DM, "h3", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_CLK, "d2", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_CMD, "e3", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT0, "e4", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT1, "e2", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT2, "e1", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT3, "f4", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT4, "f3", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT5, "f1", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT6, "g4", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT7, "g3", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP2_CLKX, "ad27", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP2_DR, "ad26", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP2_DX, "ad25", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP2_FSX, "ac28", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP1_CLKX, "ac26", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP1_DR, "ac25", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP1_DX, "ab25", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP1_FSX, "ac27", NULL),
+	_OMAP4_BALLENTRY(ABE_PDM_UL_DATA, "ag25", NULL),
+	_OMAP4_BALLENTRY(ABE_PDM_DL_DATA, "af25", NULL),
+	_OMAP4_BALLENTRY(ABE_PDM_FRAME, "ae25", NULL),
+	_OMAP4_BALLENTRY(ABE_PDM_LB_CLK, "af26", NULL),
+	_OMAP4_BALLENTRY(ABE_CLKS, "ah26", NULL),
+	_OMAP4_BALLENTRY(ABE_DMIC_CLK1, "ae24", NULL),
+	_OMAP4_BALLENTRY(ABE_DMIC_DIN1, "af24", NULL),
+	_OMAP4_BALLENTRY(ABE_DMIC_DIN2, "ag24", NULL),
+	_OMAP4_BALLENTRY(ABE_DMIC_DIN3, "ah24", NULL),
+	_OMAP4_BALLENTRY(UART2_CTS, "ab26", NULL),
+	_OMAP4_BALLENTRY(UART2_RTS, "ab27", NULL),
+	_OMAP4_BALLENTRY(UART2_RX, "aa25", NULL),
+	_OMAP4_BALLENTRY(UART2_TX, "aa26", NULL),
+	_OMAP4_BALLENTRY(HDQ_SIO, "aa27", NULL),
+	_OMAP4_BALLENTRY(I2C1_SCL, "ae28", NULL),
+	_OMAP4_BALLENTRY(I2C1_SDA, "ae26", NULL),
+	_OMAP4_BALLENTRY(I2C2_SCL, "c26", NULL),
+	_OMAP4_BALLENTRY(I2C2_SDA, "d26", NULL),
+	_OMAP4_BALLENTRY(I2C3_SCL, "w27", NULL),
+	_OMAP4_BALLENTRY(I2C3_SDA, "y27", NULL),
+	_OMAP4_BALLENTRY(I2C4_SCL, "ag21", NULL),
+	_OMAP4_BALLENTRY(I2C4_SDA, "ah22", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_CLK, "af22", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_SOMI, "ae22", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_SIMO, "ag22", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_CS0, "ae23", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_CS1, "af23", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_CS2, "ag23", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_CS3, "ah23", NULL),
+	_OMAP4_BALLENTRY(UART3_CTS_RCTX, "f27", NULL),
+	_OMAP4_BALLENTRY(UART3_RTS_SD, "f28", NULL),
+	_OMAP4_BALLENTRY(UART3_RX_IRRX, "g27", NULL),
+	_OMAP4_BALLENTRY(UART3_TX_IRTX, "g28", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_CLK, "ae5", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_CMD, "af5", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_DAT0, "ae4", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_DAT1, "af4", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_DAT2, "ag3", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_DAT3, "af3", NULL),
+	_OMAP4_BALLENTRY(MCSPI4_CLK, "ae21", NULL),
+	_OMAP4_BALLENTRY(MCSPI4_SIMO, "af20", NULL),
+	_OMAP4_BALLENTRY(MCSPI4_SOMI, "af21", NULL),
+	_OMAP4_BALLENTRY(MCSPI4_CS0, "ae20", NULL),
+	_OMAP4_BALLENTRY(UART4_RX, "ag20", NULL),
+	_OMAP4_BALLENTRY(UART4_TX, "ah19", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_CLK, "ag12", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_STP, "af12", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DIR, "ae12", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_NXT, "ag13", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT0, "ae11", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT1, "af11", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT2, "ag11", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT3, "ah11", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT4, "ae10", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT5, "af10", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT6, "ag10", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT7, "ae9", NULL),
+	_OMAP4_BALLENTRY(USBB2_HSIC_DATA, "af13", NULL),
+	_OMAP4_BALLENTRY(USBB2_HSIC_STROBE, "ae13", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_TX0, "g26", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_TY0, "g25", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_TX1, "h26", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_TY1, "h25", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_TX2, "j27", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_TY2, "h27", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_RX0, "j26", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_RY0, "j25", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_RX1, "k26", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_RY1, "k25", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_RX2, "l27", NULL),
+	_OMAP4_BALLENTRY(UNIPRO_RY2, "k27", NULL),
+	_OMAP4_BALLENTRY(USBA0_OTG_CE, "c3", NULL),
+	_OMAP4_BALLENTRY(USBA0_OTG_DP, "b5", NULL),
+	_OMAP4_BALLENTRY(USBA0_OTG_DM, "b4", NULL),
+	_OMAP4_BALLENTRY(FREF_CLK1_OUT, "aa28", NULL),
+	_OMAP4_BALLENTRY(FREF_CLK2_OUT, "y28", NULL),
+	_OMAP4_BALLENTRY(SYS_NIRQ1, "ae6", NULL),
+	_OMAP4_BALLENTRY(SYS_NIRQ2, "af6", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT0, "f26", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT1, "e27", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT2, "e26", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT3, "e25", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT4, "d28", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT5, "d27", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU0, "m2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU1, "n2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU2, "p2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU3, "v1", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU4, "v2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU5, "w1", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU6, "w2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU7, "w3", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU8, "w4", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU9, "y2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU10, "y3", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU11, "y4", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU12, "aa1", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU13, "aa2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU14, "aa3", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU15, "aa4", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU16, "ab2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU17, "ab3", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU18, "ab4", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU19, "ac4", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap4_core_cbl_ball  NULL
+#endif
+
+/*
+ * Superset of all mux modes for omap4 ES2.0
+ */
+static struct omap_mux __initdata omap4_es2_core_muxmodes[] = {
+	_OMAP4_MUXENTRY(GPMC_AD0, 0, "gpmc_ad0", "sdmmc2_dat0", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD1, 0, "gpmc_ad1", "sdmmc2_dat1", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD2, 0, "gpmc_ad2", "sdmmc2_dat2", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD3, 0, "gpmc_ad3", "sdmmc2_dat3", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD4, 0, "gpmc_ad4", "sdmmc2_dat4",
+			"sdmmc2_dir_dat0", NULL, NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD5, 0, "gpmc_ad5", "sdmmc2_dat5",
+			"sdmmc2_dir_dat1", NULL, NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD6, 0, "gpmc_ad6", "sdmmc2_dat6",
+			"sdmmc2_dir_cmd", NULL, NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD7, 0, "gpmc_ad7", "sdmmc2_dat7",
+			"sdmmc2_clk_fdbk", NULL, NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD8, 32, "gpmc_ad8", "kpd_row0", "c2c_data15",
+			"gpio_32", NULL, "sdmmc1_dat0", NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD9, 33, "gpmc_ad9", "kpd_row1", "c2c_data14",
+			"gpio_33", NULL, "sdmmc1_dat1", NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD10, 34, "gpmc_ad10", "kpd_row2", "c2c_data13",
+			"gpio_34", NULL, "sdmmc1_dat2", NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD11, 35, "gpmc_ad11", "kpd_row3", "c2c_data12",
+			"gpio_35", NULL, "sdmmc1_dat3", NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD12, 36, "gpmc_ad12", "kpd_col0", "c2c_data11",
+			"gpio_36", NULL, "sdmmc1_dat4", NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD13, 37, "gpmc_ad13", "kpd_col1", "c2c_data10",
+			"gpio_37", NULL, "sdmmc1_dat5", NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD14, 38, "gpmc_ad14", "kpd_col2", "c2c_data9",
+			"gpio_38", NULL, "sdmmc1_dat6", NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_AD15, 39, "gpmc_ad15", "kpd_col3", "c2c_data8",
+			"gpio_39", NULL, "sdmmc1_dat7", NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_A16, 40, "gpmc_a16", "kpd_row4", "c2c_datain0",
+			"gpio_40", "venc_656_data0", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A17, 41, "gpmc_a17", "kpd_row5", "c2c_datain1",
+			"gpio_41", "venc_656_data1", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A18, 42, "gpmc_a18", "kpd_row6", "c2c_datain2",
+			"gpio_42", "venc_656_data2", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A19, 43, "gpmc_a19", "kpd_row7", "c2c_datain3",
+			"gpio_43", "venc_656_data3", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A20, 44, "gpmc_a20", "kpd_col4", "c2c_datain4",
+			"gpio_44", "venc_656_data4", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A21, 45, "gpmc_a21", "kpd_col5", "c2c_datain5",
+			"gpio_45", "venc_656_data5", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A22, 46, "gpmc_a22", "kpd_col6", "c2c_datain6",
+			"gpio_46", "venc_656_data6", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A23, 47, "gpmc_a23", "kpd_col7", "c2c_datain7",
+			"gpio_47", "venc_656_data7", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A24, 48, "gpmc_a24", "kpd_col8", "c2c_clkout0",
+			"gpio_48", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_A25, 49, "gpmc_a25", NULL, "c2c_clkout1",
+			"gpio_49", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NCS0, 50, "gpmc_ncs0", NULL, NULL, "gpio_50",
+			"sys_ndmareq0", NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NCS1, 51, "gpmc_ncs1", NULL, "c2c_dataout6",
+			"gpio_51", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NCS2, 52, "gpmc_ncs2", "kpd_row8",
+			"c2c_dataout7", "gpio_52", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NCS3, 53, "gpmc_ncs3", "gpmc_dir",
+			"c2c_dataout4", "gpio_53", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NWP, 54, "gpmc_nwp", "dsi1_te0", NULL, "gpio_54",
+			"sys_ndmareq1", NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_CLK, 55, "gpmc_clk", NULL, NULL, "gpio_55",
+			"sys_ndmareq2", "sdmmc1_cmd", NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NADV_ALE, 56, "gpmc_nadv_ale", "dsi1_te1", NULL,
+			"gpio_56", "sys_ndmareq3", "sdmmc1_clk", NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NOE, 0, "gpmc_noe", "sdmmc2_clk", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NWE, 0, "gpmc_nwe", "sdmmc2_cmd", NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NBE0_CLE, 59, "gpmc_nbe0_cle", "dsi2_te0", NULL,
+			"gpio_59", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_NBE1, 60, "gpmc_nbe1", NULL, "c2c_dataout5",
+			"gpio_60", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_WAIT0, 61, "gpmc_wait0", "dsi2_te1", NULL,
+			"gpio_61", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(GPMC_WAIT1, 62, "gpmc_wait1", NULL, "c2c_dataout2",
+			"gpio_62", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_WAIT2, 100, "gpmc_wait2", "usbc1_icusb_txen",
+			"c2c_dataout3", "gpio_100", "sys_ndmareq0", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NCS4, 101, "gpmc_ncs4", "dsi1_te0", "c2c_clkin0",
+			"gpio_101", "sys_ndmareq1", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NCS5, 102, "gpmc_ncs5", "dsi1_te1", "c2c_clkin1",
+			"gpio_102", "sys_ndmareq2", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NCS6, 103, "gpmc_ncs6", "dsi2_te0",
+			"c2c_dataout0", "gpio_103", "sys_ndmareq3", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(GPMC_NCS7, 104, "gpmc_ncs7", "dsi2_te1",
+			"c2c_dataout1", "gpio_104", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(HDMI_HPD, 63, "hdmi_hpd", NULL, NULL, "gpio_63", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(HDMI_CEC, 64, "hdmi_cec", NULL, NULL, "gpio_64", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(HDMI_DDC_SCL, 65, "hdmi_ddc_scl", NULL, NULL,
+			"gpio_65", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(HDMI_DDC_SDA, 66, "hdmi_ddc_sda", NULL, NULL,
+			"gpio_66", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DX0, 0, "csi21_dx0", NULL, NULL, "gpi_67", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DY0, 0, "csi21_dy0", NULL, NULL, "gpi_68", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DX1, 0, "csi21_dx1", NULL, NULL, "gpi_69", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DY1, 0, "csi21_dy1", NULL, NULL, "gpi_70", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DX2, 0, "csi21_dx2", NULL, NULL, "gpi_71", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DY2, 0, "csi21_dy2", NULL, NULL, "gpi_72", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DX3, 0, "csi21_dx3", NULL, NULL, "gpi_73", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DY3, 0, "csi21_dy3", NULL, NULL, "gpi_74", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DX4, 0, "csi21_dx4", NULL, NULL, "gpi_75", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI21_DY4, 0, "csi21_dy4", NULL, NULL, "gpi_76", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI22_DX0, 0, "csi22_dx0", NULL, NULL, "gpi_77", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI22_DY0, 0, "csi22_dy0", NULL, NULL, "gpi_78", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI22_DX1, 0, "csi22_dx1", NULL, NULL, "gpi_79", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CSI22_DY1, 0, "csi22_dy1", NULL, NULL, "gpi_80", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CAM_SHUTTER, 81, "cam_shutter", NULL, NULL, "gpio_81",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CAM_STROBE, 82, "cam_strobe", NULL, NULL, "gpio_82",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(CAM_GLOBALRESET, 83, "cam_globalreset", NULL, NULL,
+			"gpio_83", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_CLK, 84, "usbb1_ulpitll_clk",
+			"hsi1_cawake", NULL, "gpio_84", "usbb1_ulpiphy_clk",
+			NULL, "hw_dbg20", "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_STP, 85, "usbb1_ulpitll_stp",
+			"hsi1_cadata", "mcbsp4_clkr", "gpio_85",
+			"usbb1_ulpiphy_stp", "usbb1_mm_rxdp", "hw_dbg21",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DIR, 86, "usbb1_ulpitll_dir",
+			"hsi1_caflag", "mcbsp4_fsr", "gpio_86",
+			"usbb1_ulpiphy_dir", NULL, "hw_dbg22", "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_NXT, 87, "usbb1_ulpitll_nxt",
+			"hsi1_acready", "mcbsp4_fsx", "gpio_87",
+			"usbb1_ulpiphy_nxt", "usbb1_mm_rxdm", "hw_dbg23",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT0, 88, "usbb1_ulpitll_dat0",
+			"hsi1_acwake", "mcbsp4_clkx", "gpio_88",
+			"usbb1_ulpiphy_dat0", "usbb1_mm_txen", "hw_dbg24",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT1, 89, "usbb1_ulpitll_dat1",
+			"hsi1_acdata", "mcbsp4_dx", "gpio_89",
+			"usbb1_ulpiphy_dat1", "usbb1_mm_txdat", "hw_dbg25",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT2, 90, "usbb1_ulpitll_dat2",
+			"hsi1_acflag", "mcbsp4_dr", "gpio_90",
+			"usbb1_ulpiphy_dat2", "usbb1_mm_txse0", "hw_dbg26",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT3, 91, "usbb1_ulpitll_dat3",
+			"hsi1_caready", NULL, "gpio_91", "usbb1_ulpiphy_dat3",
+			"usbb1_mm_rxrcv", "hw_dbg27", "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT4, 92, "usbb1_ulpitll_dat4",
+			"dmtimer8_pwm_evt", "abe_mcbsp3_dr", "gpio_92",
+			"usbb1_ulpiphy_dat4", NULL, "hw_dbg28", "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT5, 93, "usbb1_ulpitll_dat5",
+			"dmtimer9_pwm_evt", "abe_mcbsp3_dx", "gpio_93",
+			"usbb1_ulpiphy_dat5", NULL, "hw_dbg29", "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT6, 94, "usbb1_ulpitll_dat6",
+			"dmtimer10_pwm_evt", "abe_mcbsp3_clkx", "gpio_94",
+			"usbb1_ulpiphy_dat6", "abe_dmic_din3", "hw_dbg30",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_ULPITLL_DAT7, 95, "usbb1_ulpitll_dat7",
+			"dmtimer11_pwm_evt", "abe_mcbsp3_fsx", "gpio_95",
+			"usbb1_ulpiphy_dat7", "abe_dmic_clk3", "hw_dbg31",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_HSIC_DATA, 96, "usbb1_hsic_data", NULL, NULL,
+			"gpio_96", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB1_HSIC_STROBE, 97, "usbb1_hsic_strobe", NULL,
+			NULL, "gpio_97", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBC1_ICUSB_DP, 98, "usbc1_icusb_dp", NULL, NULL,
+			"gpio_98", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBC1_ICUSB_DM, 99, "usbc1_icusb_dm", NULL, NULL,
+			"gpio_99", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_CLK, 100, "sdmmc1_clk", NULL, "dpm_emu19",
+			"gpio_100", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_CMD, 101, "sdmmc1_cmd", NULL, "uart1_rx",
+			"gpio_101", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT0, 102, "sdmmc1_dat0", NULL, "dpm_emu18",
+			"gpio_102", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT1, 103, "sdmmc1_dat1", NULL, "dpm_emu17",
+			"gpio_103", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT2, 104, "sdmmc1_dat2", NULL, "dpm_emu16",
+			"gpio_104", "jtag_tms_tmsc", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT3, 105, "sdmmc1_dat3", NULL, "dpm_emu15",
+			"gpio_105", "jtag_tck", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT4, 106, "sdmmc1_dat4", NULL, NULL,
+			"gpio_106", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT5, 107, "sdmmc1_dat5", NULL, NULL,
+			"gpio_107", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT6, 108, "sdmmc1_dat6", NULL, NULL,
+			"gpio_108", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC1_DAT7, 109, "sdmmc1_dat7", NULL, NULL,
+			"gpio_109", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP2_CLKX, 110, "abe_mcbsp2_clkx", "mcspi2_clk",
+			"abe_mcasp_ahclkx", "gpio_110", "usbb2_mm_rxdm",
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP2_DR, 111, "abe_mcbsp2_dr", "mcspi2_somi",
+			"abe_mcasp_axr", "gpio_111", "usbb2_mm_rxdp", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP2_DX, 112, "abe_mcbsp2_dx", "mcspi2_simo",
+			"abe_mcasp_amute", "gpio_112", "usbb2_mm_rxrcv", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP2_FSX, 113, "abe_mcbsp2_fsx", "mcspi2_cs0",
+			"abe_mcasp_afsx", "gpio_113", "usbb2_mm_txen", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP1_CLKX, 114, "abe_mcbsp1_clkx",
+			"abe_slimbus1_clock", NULL, "gpio_114", NULL, NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP1_DR, 115, "abe_mcbsp1_dr",
+			"abe_slimbus1_data", NULL, "gpio_115", NULL, NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP1_DX, 116, "abe_mcbsp1_dx", "sdmmc3_dat2",
+			"abe_mcasp_aclkx", "gpio_116", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_MCBSP1_FSX, 117, "abe_mcbsp1_fsx", "sdmmc3_dat3",
+			"abe_mcasp_amutein", "gpio_117", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_PDM_UL_DATA, 0, "abe_pdm_ul_data",
+			"abe_mcbsp3_dr", NULL, NULL, NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_PDM_DL_DATA, 0, "abe_pdm_dl_data",
+			"abe_mcbsp3_dx", NULL, NULL, NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_PDM_FRAME, 0, "abe_pdm_frame", "abe_mcbsp3_clkx",
+			NULL, NULL, NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_PDM_LB_CLK, 0, "abe_pdm_lb_clk", "abe_mcbsp3_fsx",
+			NULL, NULL, NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_CLKS, 118, "abe_clks", NULL, NULL, "gpio_118",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_DMIC_CLK1, 119, "abe_dmic_clk1", NULL, NULL,
+			"gpio_119", "usbb2_mm_txse0", "uart4_cts", NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_DMIC_DIN1, 120, "abe_dmic_din1", NULL, NULL,
+			"gpio_120", "usbb2_mm_txdat", "uart4_rts", NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(ABE_DMIC_DIN2, 121, "abe_dmic_din2", "slimbus2_clock",
+			"abe_mcasp_axr", "gpio_121", NULL,
+			"dmtimer11_pwm_evt", NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(ABE_DMIC_DIN3, 122, "abe_dmic_din3", "slimbus2_data",
+			"abe_dmic_clk2", "gpio_122", NULL, "dmtimer9_pwm_evt",
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART2_CTS, 123, "uart2_cts", "sdmmc3_clk", NULL,
+			"gpio_123", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART2_RTS, 124, "uart2_rts", "sdmmc3_cmd", NULL,
+			"gpio_124", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART2_RX, 125, "uart2_rx", "sdmmc3_dat0", NULL,
+			"gpio_125", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART2_TX, 126, "uart2_tx", "sdmmc3_dat1", NULL,
+			"gpio_126", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(HDQ_SIO, 127, "hdq_sio", "i2c3_sccb", "i2c2_sccb",
+			"gpio_127", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C1_SCL, 0, "i2c1_scl", NULL, NULL, NULL, NULL, NULL,
+			NULL, NULL),
+	_OMAP4_MUXENTRY(I2C1_SDA, 0, "i2c1_sda", NULL, NULL, NULL, NULL, NULL,
+			NULL, NULL),
+	_OMAP4_MUXENTRY(I2C2_SCL, 128, "i2c2_scl", "uart1_rx", NULL,
+			"gpio_128", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C2_SDA, 129, "i2c2_sda", "uart1_tx", NULL,
+			"gpio_129", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C3_SCL, 130, "i2c3_scl", NULL, NULL, "gpio_130",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C3_SDA, 131, "i2c3_sda", NULL, NULL, "gpio_131",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C4_SCL, 132, "i2c4_scl", NULL, NULL, "gpio_132",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(I2C4_SDA, 133, "i2c4_sda", NULL, NULL, "gpio_133",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_CLK, 134, "mcspi1_clk", NULL, NULL, "gpio_134",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_SOMI, 135, "mcspi1_somi", NULL, NULL,
+			"gpio_135", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_SIMO, 136, "mcspi1_simo", NULL, NULL,
+			"gpio_136", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_CS0, 137, "mcspi1_cs0", NULL, NULL, "gpio_137",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_CS1, 138, "mcspi1_cs1", "uart1_rx", NULL,
+			"gpio_138", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_CS2, 139, "mcspi1_cs2", "uart1_cts",
+			"slimbus2_clock", "gpio_139", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI1_CS3, 140, "mcspi1_cs3", "uart1_rts",
+			"slimbus2_data", "gpio_140", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(UART3_CTS_RCTX, 141, "uart3_cts_rctx", "uart1_tx",
+			NULL, "gpio_141", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART3_RTS_SD, 142, "uart3_rts_sd", NULL, NULL,
+			"gpio_142", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART3_RX_IRRX, 143, "uart3_rx_irrx",
+			"dmtimer8_pwm_evt", NULL, "gpio_143", NULL, NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART3_TX_IRTX, 144, "uart3_tx_irtx",
+			"dmtimer9_pwm_evt", NULL, "gpio_144", NULL, NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_CLK, 145, "sdmmc5_clk", "mcspi2_clk",
+			"usbc1_icusb_dp", "gpio_145", NULL, "sdmmc2_clk",
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_CMD, 146, "sdmmc5_cmd", "mcspi2_simo",
+			"usbc1_icusb_dm", "gpio_146", NULL, "sdmmc2_cmd",
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_DAT0, 147, "sdmmc5_dat0", "mcspi2_somi",
+			"usbc1_icusb_rcv", "gpio_147", NULL, "sdmmc2_dat0",
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_DAT1, 148, "sdmmc5_dat1", NULL,
+			"usbc1_icusb_txen", "gpio_148", NULL, "sdmmc2_dat1",
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_DAT2, 149, "sdmmc5_dat2", "mcspi2_cs1", NULL,
+			"gpio_149", NULL, "sdmmc2_dat2", NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SDMMC5_DAT3, 150, "sdmmc5_dat3", "mcspi2_cs0", NULL,
+			"gpio_150", NULL, "sdmmc2_dat3", NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI4_CLK, 151, "mcspi4_clk", "sdmmc4_clk",
+			"kpd_col6", "gpio_151", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI4_SIMO, 152, "mcspi4_simo", "sdmmc4_cmd",
+			"kpd_col7", "gpio_152", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI4_SOMI, 153, "mcspi4_somi", "sdmmc4_dat0",
+			"kpd_row6", "gpio_153", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(MCSPI4_CS0, 154, "mcspi4_cs0", "sdmmc4_dat3",
+			"kpd_row7", "gpio_154", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(UART4_RX, 155, "uart4_rx", "sdmmc4_dat2", "kpd_row8",
+			"gpio_155", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(UART4_TX, 156, "uart4_tx", "sdmmc4_dat1", "kpd_col8",
+			"gpio_156", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_CLK, 157, "usbb2_ulpitll_clk",
+			"usbb2_ulpiphy_clk", "sdmmc4_cmd", "gpio_157",
+			"hsi2_cawake", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_STP, 158, "usbb2_ulpitll_stp",
+			"usbb2_ulpiphy_stp", "sdmmc4_clk", "gpio_158",
+			"hsi2_cadata", "dispc2_data23", NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DIR, 159, "usbb2_ulpitll_dir",
+			"usbb2_ulpiphy_dir", "sdmmc4_dat0", "gpio_159",
+			"hsi2_caflag", "dispc2_data22", NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_NXT, 160, "usbb2_ulpitll_nxt",
+			"usbb2_ulpiphy_nxt", "sdmmc4_dat1", "gpio_160",
+			"hsi2_acready", "dispc2_data21", NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT0, 161, "usbb2_ulpitll_dat0",
+			"usbb2_ulpiphy_dat0", "sdmmc4_dat2", "gpio_161",
+			"hsi2_acwake", "dispc2_data20", "usbb2_mm_txen",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT1, 162, "usbb2_ulpitll_dat1",
+			"usbb2_ulpiphy_dat1", "sdmmc4_dat3", "gpio_162",
+			"hsi2_acdata", "dispc2_data19", "usbb2_mm_txdat",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT2, 163, "usbb2_ulpitll_dat2",
+			"usbb2_ulpiphy_dat2", "sdmmc3_dat2", "gpio_163",
+			"hsi2_acflag", "dispc2_data18", "usbb2_mm_txse0",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT3, 164, "usbb2_ulpitll_dat3",
+			"usbb2_ulpiphy_dat3", "sdmmc3_dat1", "gpio_164",
+			"hsi2_caready", "dispc2_data15", "rfbi_data15",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT4, 165, "usbb2_ulpitll_dat4",
+			"usbb2_ulpiphy_dat4", "sdmmc3_dat0", "gpio_165",
+			"mcspi3_somi", "dispc2_data14", "rfbi_data14",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT5, 166, "usbb2_ulpitll_dat5",
+			"usbb2_ulpiphy_dat5", "sdmmc3_dat3", "gpio_166",
+			"mcspi3_cs0", "dispc2_data13", "rfbi_data13",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT6, 167, "usbb2_ulpitll_dat6",
+			"usbb2_ulpiphy_dat6", "sdmmc3_cmd", "gpio_167",
+			"mcspi3_simo", "dispc2_data12", "rfbi_data12",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_ULPITLL_DAT7, 168, "usbb2_ulpitll_dat7",
+			"usbb2_ulpiphy_dat7", "sdmmc3_clk", "gpio_168",
+			"mcspi3_clk", "dispc2_data11", "rfbi_data11",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_HSIC_DATA, 169, "usbb2_hsic_data", NULL, NULL,
+			"gpio_169", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBB2_HSIC_STROBE, 170, "usbb2_hsic_strobe", NULL,
+			NULL, "gpio_170", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_COL3, 171, "kpd_col3", "kpd_col0", NULL,
+			"gpio_171", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_COL4, 172, "kpd_col4", "kpd_col1", NULL,
+			"gpio_172", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_COL5, 173, "kpd_col5", "kpd_col2", NULL,
+			"gpio_173", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_COL0, 174, "kpd_col0", "kpd_col3", NULL,
+			"gpio_174", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_COL1, 0, "kpd_col1", "kpd_col4", NULL, "gpio_0",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_COL2, 1, "kpd_col2", "kpd_col5", NULL, "gpio_1",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_ROW3, 175, "kpd_row3", "kpd_row0", NULL,
+			"gpio_175", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_ROW4, 176, "kpd_row4", "kpd_row1", NULL,
+			"gpio_176", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_ROW5, 177, "kpd_row5", "kpd_row2", NULL,
+			"gpio_177", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_ROW0, 178, "kpd_row0", "kpd_row3", NULL,
+			"gpio_178", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_ROW1, 2, "kpd_row1", "kpd_row4", NULL, "gpio_2",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(KPD_ROW2, 3, "kpd_row2", "kpd_row5", NULL, "gpio_3",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBA0_OTG_CE, 0, "usba0_otg_ce", NULL, NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(USBA0_OTG_DP, 0, "usba0_otg_dp", "uart3_rx_irrx",
+			"uart2_rx", NULL, NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(USBA0_OTG_DM, 0, "usba0_otg_dm", "uart3_tx_irtx",
+			"uart2_tx", NULL, NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(FREF_CLK1_OUT, 181, "fref_clk1_out", NULL, NULL,
+			"gpio_181", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(FREF_CLK2_OUT, 182, "fref_clk2_out", NULL, NULL,
+			"gpio_182", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_NIRQ1, 0, "sys_nirq1", NULL, NULL, NULL, NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_NIRQ2, 183, "sys_nirq2", NULL, NULL, "gpio_183",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT0, 184, "sys_boot0", NULL, NULL, "gpio_184",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT1, 185, "sys_boot1", NULL, NULL, "gpio_185",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT2, 186, "sys_boot2", NULL, NULL, "gpio_186",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT3, 187, "sys_boot3", NULL, NULL, "gpio_187",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT4, 188, "sys_boot4", NULL, NULL, "gpio_188",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT5, 189, "sys_boot5", NULL, NULL, "gpio_189",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU0, 11, "dpm_emu0", NULL, NULL, "gpio_11", NULL,
+			NULL, "hw_dbg0", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU1, 12, "dpm_emu1", NULL, NULL, "gpio_12", NULL,
+			NULL, "hw_dbg1", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU2, 13, "dpm_emu2", "usba0_ulpiphy_clk", NULL,
+			"gpio_13", NULL, "dispc2_fid", "hw_dbg2",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU3, 14, "dpm_emu3", "usba0_ulpiphy_stp", NULL,
+			"gpio_14", "rfbi_data10", "dispc2_data10", "hw_dbg3",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU4, 15, "dpm_emu4", "usba0_ulpiphy_dir", NULL,
+			"gpio_15", "rfbi_data9", "dispc2_data9", "hw_dbg4",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU5, 16, "dpm_emu5", "usba0_ulpiphy_nxt", NULL,
+			"gpio_16", "rfbi_te_vsync0", "dispc2_data16",
+			"hw_dbg5", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU6, 17, "dpm_emu6", "usba0_ulpiphy_dat0",
+			"uart3_tx_irtx", "gpio_17", "rfbi_hsync0",
+			"dispc2_data17", "hw_dbg6", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU7, 18, "dpm_emu7", "usba0_ulpiphy_dat1",
+			"uart3_rx_irrx", "gpio_18", "rfbi_cs0",
+			"dispc2_hsync", "hw_dbg7", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU8, 19, "dpm_emu8", "usba0_ulpiphy_dat2",
+			"uart3_rts_sd", "gpio_19", "rfbi_re", "dispc2_pclk",
+			"hw_dbg8", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU9, 20, "dpm_emu9", "usba0_ulpiphy_dat3",
+			"uart3_cts_rctx", "gpio_20", "rfbi_we",
+			"dispc2_vsync", "hw_dbg9", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU10, 21, "dpm_emu10", "usba0_ulpiphy_dat4",
+			NULL, "gpio_21", "rfbi_a0", "dispc2_de", "hw_dbg10",
+			"safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU11, 22, "dpm_emu11", "usba0_ulpiphy_dat5",
+			NULL, "gpio_22", "rfbi_data8", "dispc2_data8",
+			"hw_dbg11", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU12, 23, "dpm_emu12", "usba0_ulpiphy_dat6",
+			NULL, "gpio_23", "rfbi_data7", "dispc2_data7",
+			"hw_dbg12", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU13, 24, "dpm_emu13", "usba0_ulpiphy_dat7",
+			NULL, "gpio_24", "rfbi_data6", "dispc2_data6",
+			"hw_dbg13", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU14, 25, "dpm_emu14", "sys_drm_msecure",
+			"uart1_rx", "gpio_25", "rfbi_data5", "dispc2_data5",
+			"hw_dbg14", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU15, 26, "dpm_emu15", "sys_secure_indicator",
+			NULL, "gpio_26", "rfbi_data4", "dispc2_data4",
+			"hw_dbg15", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU16, 27, "dpm_emu16", "dmtimer8_pwm_evt",
+			"dsi1_te0", "gpio_27", "rfbi_data3", "dispc2_data3",
+			"hw_dbg16", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU17, 28, "dpm_emu17", "dmtimer9_pwm_evt",
+			"dsi1_te1", "gpio_28", "rfbi_data2", "dispc2_data2",
+			"hw_dbg17", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU18, 190, "dpm_emu18", "dmtimer10_pwm_evt",
+			"dsi2_te0", "gpio_190", "rfbi_data1", "dispc2_data1",
+			"hw_dbg18", "safe_mode"),
+	_OMAP4_MUXENTRY(DPM_EMU19, 191, "dpm_emu19", "dmtimer11_pwm_evt",
+			"dsi2_te1", "gpio_191", "rfbi_data0", "dispc2_data0",
+			"hw_dbg19", "safe_mode"),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for 44XX CBS package
+ * 547-pin CBL ES2.0 S-FPGA-N547, 0.40mm Ball Pitch (Top),
+ *				  0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
+		&& defined(CONFIG_OMAP_PACKAGE_CBS)
+struct omap_ball __initdata omap4_core_cbs_ball[] = {
+	_OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD3, "d13", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD4, "c15", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD5, "d15", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD6, "a16", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD7, "b16", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD8, "c16", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD9, "d16", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD10, "c17", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD11, "d17", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD12, "c18", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD13, "d18", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD14, "c19", NULL),
+	_OMAP4_BALLENTRY(GPMC_AD15, "d19", NULL),
+	_OMAP4_BALLENTRY(GPMC_A16, "b17", NULL),
+	_OMAP4_BALLENTRY(GPMC_A17, "a18", NULL),
+	_OMAP4_BALLENTRY(GPMC_A18, "b18", NULL),
+	_OMAP4_BALLENTRY(GPMC_A19, "a19", NULL),
+	_OMAP4_BALLENTRY(GPMC_A20, "b19", NULL),
+	_OMAP4_BALLENTRY(GPMC_A21, "b20", NULL),
+	_OMAP4_BALLENTRY(GPMC_A22, "a21", NULL),
+	_OMAP4_BALLENTRY(GPMC_A23, "b21", NULL),
+	_OMAP4_BALLENTRY(GPMC_A24, "c20", NULL),
+	_OMAP4_BALLENTRY(GPMC_A25, "d20", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS0, "b25", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS1, "c21", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS2, "d21", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS3, "c22", NULL),
+	_OMAP4_BALLENTRY(GPMC_NWP, "c25", NULL),
+	_OMAP4_BALLENTRY(GPMC_CLK, "b22", NULL),
+	_OMAP4_BALLENTRY(GPMC_NADV_ALE, "d25", NULL),
+	_OMAP4_BALLENTRY(GPMC_NOE, "b11", NULL),
+	_OMAP4_BALLENTRY(GPMC_NWE, "b12", NULL),
+	_OMAP4_BALLENTRY(GPMC_NBE0_CLE, "c23", NULL),
+	_OMAP4_BALLENTRY(GPMC_NBE1, "d22", NULL),
+	_OMAP4_BALLENTRY(GPMC_WAIT0, "b26", NULL),
+	_OMAP4_BALLENTRY(GPMC_WAIT1, "b23", NULL),
+	_OMAP4_BALLENTRY(GPMC_WAIT2, "d23", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS4, "a24", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS5, "b24", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS6, "c24", NULL),
+	_OMAP4_BALLENTRY(GPMC_NCS7, "d24", NULL),
+	_OMAP4_BALLENTRY(HDMI_HPD, "b9", NULL),
+	_OMAP4_BALLENTRY(HDMI_CEC, "b10", NULL),
+	_OMAP4_BALLENTRY(HDMI_DDC_SCL, "a8", NULL),
+	_OMAP4_BALLENTRY(HDMI_DDC_SDA, "b8", NULL),
+	_OMAP4_BALLENTRY(CSI21_DX0, "r26", NULL),
+	_OMAP4_BALLENTRY(CSI21_DY0, "r25", NULL),
+	_OMAP4_BALLENTRY(CSI21_DX1, "t26", NULL),
+	_OMAP4_BALLENTRY(CSI21_DY1, "t25", NULL),
+	_OMAP4_BALLENTRY(CSI21_DX2, "u26", NULL),
+	_OMAP4_BALLENTRY(CSI21_DY2, "u25", NULL),
+	_OMAP4_BALLENTRY(CSI21_DX3, "v26", NULL),
+	_OMAP4_BALLENTRY(CSI21_DY3, "v25", NULL),
+	_OMAP4_BALLENTRY(CSI21_DX4, "w26", NULL),
+	_OMAP4_BALLENTRY(CSI21_DY4, "w25", NULL),
+	_OMAP4_BALLENTRY(CSI22_DX0, "m26", NULL),
+	_OMAP4_BALLENTRY(CSI22_DY0, "m25", NULL),
+	_OMAP4_BALLENTRY(CSI22_DX1, "n26", NULL),
+	_OMAP4_BALLENTRY(CSI22_DY1, "n25", NULL),
+	_OMAP4_BALLENTRY(CAM_SHUTTER, "t27", NULL),
+	_OMAP4_BALLENTRY(CAM_STROBE, "u27", NULL),
+	_OMAP4_BALLENTRY(CAM_GLOBALRESET, "v27", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_CLK, "ae18", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_STP, "ag19", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DIR, "af19", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_NXT, "ae19", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT0, "af18", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT1, "ag18", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT2, "ae17", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT3, "af17", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT4, "ah17", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT5, "ae16", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT6, "af16", NULL),
+	_OMAP4_BALLENTRY(USBB1_ULPITLL_DAT7, "ag16", NULL),
+	_OMAP4_BALLENTRY(USBB1_HSIC_DATA, "af14", NULL),
+	_OMAP4_BALLENTRY(USBB1_HSIC_STROBE, "ae14", NULL),
+	_OMAP4_BALLENTRY(USBC1_ICUSB_DP, "h2", NULL),
+	_OMAP4_BALLENTRY(USBC1_ICUSB_DM, "h3", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_CLK, "d2", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_CMD, "e3", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT0, "e4", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT1, "e2", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT2, "e1", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT3, "f4", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT4, "f3", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT5, "f1", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT6, "g4", NULL),
+	_OMAP4_BALLENTRY(SDMMC1_DAT7, "g3", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP2_CLKX, "ad27", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP2_DR, "ad26", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP2_DX, "ad25", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP2_FSX, "ac28", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP1_CLKX, "ac26", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP1_DR, "ac25", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP1_DX, "ab25", NULL),
+	_OMAP4_BALLENTRY(ABE_MCBSP1_FSX, "ac27", NULL),
+	_OMAP4_BALLENTRY(ABE_PDM_UL_DATA, "ag25", NULL),
+	_OMAP4_BALLENTRY(ABE_PDM_DL_DATA, "af25", NULL),
+	_OMAP4_BALLENTRY(ABE_PDM_FRAME, "ae25", NULL),
+	_OMAP4_BALLENTRY(ABE_PDM_LB_CLK, "af26", NULL),
+	_OMAP4_BALLENTRY(ABE_CLKS, "ah26", NULL),
+	_OMAP4_BALLENTRY(ABE_DMIC_CLK1, "ae24", NULL),
+	_OMAP4_BALLENTRY(ABE_DMIC_DIN1, "af24", NULL),
+	_OMAP4_BALLENTRY(ABE_DMIC_DIN2, "ag24", NULL),
+	_OMAP4_BALLENTRY(ABE_DMIC_DIN3, "ah24", NULL),
+	_OMAP4_BALLENTRY(UART2_CTS, "ab26", NULL),
+	_OMAP4_BALLENTRY(UART2_RTS, "ab27", NULL),
+	_OMAP4_BALLENTRY(UART2_RX, "aa25", NULL),
+	_OMAP4_BALLENTRY(UART2_TX, "aa26", NULL),
+	_OMAP4_BALLENTRY(HDQ_SIO, "aa27", NULL),
+	_OMAP4_BALLENTRY(I2C1_SCL, "ae28", NULL),
+	_OMAP4_BALLENTRY(I2C1_SDA, "ae26", NULL),
+	_OMAP4_BALLENTRY(I2C2_SCL, "c26", NULL),
+	_OMAP4_BALLENTRY(I2C2_SDA, "d26", NULL),
+	_OMAP4_BALLENTRY(I2C3_SCL, "w27", NULL),
+	_OMAP4_BALLENTRY(I2C3_SDA, "y27", NULL),
+	_OMAP4_BALLENTRY(I2C4_SCL, "ag21", NULL),
+	_OMAP4_BALLENTRY(I2C4_SDA, "ah22", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_CLK, "af22", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_SOMI, "ae22", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_SIMO, "ag22", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_CS0, "ae23", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_CS1, "af23", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_CS2, "ag23", NULL),
+	_OMAP4_BALLENTRY(MCSPI1_CS3, "ah23", NULL),
+	_OMAP4_BALLENTRY(UART3_CTS_RCTX, "f27", NULL),
+	_OMAP4_BALLENTRY(UART3_RTS_SD, "f28", NULL),
+	_OMAP4_BALLENTRY(UART3_RX_IRRX, "g27", NULL),
+	_OMAP4_BALLENTRY(UART3_TX_IRTX, "g28", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_CLK, "ae5", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_CMD, "af5", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_DAT0, "ae4", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_DAT1, "af4", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_DAT2, "ag3", NULL),
+	_OMAP4_BALLENTRY(SDMMC5_DAT3, "af3", NULL),
+	_OMAP4_BALLENTRY(MCSPI4_CLK, "ae21", NULL),
+	_OMAP4_BALLENTRY(MCSPI4_SIMO, "af20", NULL),
+	_OMAP4_BALLENTRY(MCSPI4_SOMI, "af21", NULL),
+	_OMAP4_BALLENTRY(MCSPI4_CS0, "ae20", NULL),
+	_OMAP4_BALLENTRY(UART4_RX, "ag20", NULL),
+	_OMAP4_BALLENTRY(UART4_TX, "ah19", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_CLK, "ag12", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_STP, "af12", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DIR, "ae12", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_NXT, "ag13", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT0, "ae11", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT1, "af11", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT2, "ag11", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT3, "ah11", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT4, "ae10", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT5, "af10", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT6, "ag10", NULL),
+	_OMAP4_BALLENTRY(USBB2_ULPITLL_DAT7, "ae9", NULL),
+	_OMAP4_BALLENTRY(USBB2_HSIC_DATA, "af13", NULL),
+	_OMAP4_BALLENTRY(USBB2_HSIC_STROBE, "ae13", NULL),
+	_OMAP4_BALLENTRY(KPD_COL3, "g26", NULL),
+	_OMAP4_BALLENTRY(KPD_COL4, "g25", NULL),
+	_OMAP4_BALLENTRY(KPD_COL5, "h26", NULL),
+	_OMAP4_BALLENTRY(KPD_COL0, "h25", NULL),
+	_OMAP4_BALLENTRY(KPD_COL1, "j27", NULL),
+	_OMAP4_BALLENTRY(KPD_COL2, "h27", NULL),
+	_OMAP4_BALLENTRY(KPD_ROW3, "j26", NULL),
+	_OMAP4_BALLENTRY(KPD_ROW4, "j25", NULL),
+	_OMAP4_BALLENTRY(KPD_ROW5, "k26", NULL),
+	_OMAP4_BALLENTRY(KPD_ROW0, "k25", NULL),
+	_OMAP4_BALLENTRY(KPD_ROW1, "l27", NULL),
+	_OMAP4_BALLENTRY(KPD_ROW2, "k27", NULL),
+	_OMAP4_BALLENTRY(USBA0_OTG_CE, "c3", NULL),
+	_OMAP4_BALLENTRY(USBA0_OTG_DP, "b5", NULL),
+	_OMAP4_BALLENTRY(USBA0_OTG_DM, "b4", NULL),
+	_OMAP4_BALLENTRY(FREF_CLK1_OUT, "aa28", NULL),
+	_OMAP4_BALLENTRY(FREF_CLK2_OUT, "y28", NULL),
+	_OMAP4_BALLENTRY(SYS_NIRQ1, "ae6", NULL),
+	_OMAP4_BALLENTRY(SYS_NIRQ2, "af6", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT0, "f26", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT1, "e27", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT2, "e26", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT3, "e25", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT4, "d28", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT5, "d27", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU0, "m2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU1, "n2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU2, "p2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU3, "v1", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU4, "v2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU5, "w1", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU6, "w2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU7, "w3", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU8, "w4", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU9, "y2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU10, "y3", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU11, "y4", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU12, "aa1", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU13, "aa2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU14, "aa3", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU15, "aa4", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU16, "ab2", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU17, "ab3", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU18, "ab4", NULL),
+	_OMAP4_BALLENTRY(DPM_EMU19, "ac4", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap4_core_cbs_ball  NULL
+#endif
+
+/*
+ * Superset of all mux modes for omap4
+ */
+static struct omap_mux __initdata omap4_wkup_muxmodes[] = {
+	_OMAP4_MUXENTRY(SIM_IO, 0, "sim_io", NULL, NULL, "gpio_wk0", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SIM_CLK, 1, "sim_clk", NULL, NULL, "gpio_wk1", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SIM_RESET, 2, "sim_reset", NULL, NULL, "gpio_wk2",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SIM_CD, 3, "sim_cd", NULL, NULL, "gpio_wk3", NULL,
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SIM_PWRCTRL, 4, "sim_pwrctrl", NULL, NULL, "gpio_wk4",
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(SR_SCL, 0, "sr_scl", NULL, NULL, NULL, NULL, NULL,
+			NULL, NULL),
+	_OMAP4_MUXENTRY(SR_SDA, 0, "sr_sda", NULL, NULL, NULL, NULL, NULL,
+			NULL, NULL),
+	_OMAP4_MUXENTRY(FREF_XTAL_IN, 0, "fref_xtal_in", NULL, NULL, NULL,
+			"c2c_wakereqin", NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(FREF_SLICER_IN, 0, "fref_slicer_in", NULL, NULL,
+			"gpi_wk5", "c2c_wakereqin", NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(FREF_CLK_IOREQ, 0, "fref_clk_ioreq", NULL, NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(FREF_CLK0_OUT, 6, "fref_clk0_out", "fref_clk1_req",
+			"sys_drm_msecure", "gpio_wk6", NULL, NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(FREF_CLK3_REQ, 30, "fref_clk3_req", "fref_clk1_req",
+			"sys_drm_msecure", "gpio_wk30", "c2c_wakereqin", NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(FREF_CLK3_OUT, 31, "fref_clk3_out", "fref_clk2_req",
+			"sys_secure_indicator", "gpio_wk31", "c2c_wakereqout",
+			NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(FREF_CLK4_REQ, 7, "fref_clk4_req", "fref_clk5_out",
+			NULL, "gpio_wk7", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(FREF_CLK4_OUT, 8, "fref_clk4_out", NULL, NULL,
+			"gpio_wk8", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(SYS_32K, 0, "sys_32k", NULL, NULL, NULL, NULL, NULL,
+			NULL, NULL),
+	_OMAP4_MUXENTRY(SYS_NRESPWRON, 0, "sys_nrespwron", NULL, NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(SYS_NRESWARM, 0, "sys_nreswarm", NULL, NULL, NULL,
+			NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(SYS_PWR_REQ, 0, "sys_pwr_req", NULL, NULL, NULL, NULL,
+			NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(SYS_PWRON_RESET_OUT, 29, "sys_pwron_reset_out", NULL,
+			NULL, "gpio_wk29", NULL, NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(SYS_BOOT6, 9, "sys_boot6", "dpm_emu18", NULL,
+			"gpio_wk9", "c2c_wakereqout", NULL, NULL,
+			"safe_mode"),
+	_OMAP4_MUXENTRY(SYS_BOOT7, 10, "sys_boot7", "dpm_emu19", NULL,
+			"gpio_wk10", NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(JTAG_NTRST, 0, "jtag_ntrst", NULL, NULL, NULL, NULL,
+			NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(JTAG_TCK, 0, "jtag_tck", NULL, NULL, NULL, NULL, NULL,
+			NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(JTAG_RTCK, 0, "jtag_rtck", NULL, NULL, NULL, NULL,
+			NULL, NULL, NULL),
+	_OMAP4_MUXENTRY(JTAG_TMS_TMSC, 0, "jtag_tms_tmsc", NULL, NULL, NULL,
+			NULL, NULL, NULL, "safe_mode"),
+	_OMAP4_MUXENTRY(JTAG_TDI, 0, "jtag_tdi", NULL, NULL, NULL, NULL, NULL,
+			NULL, NULL),
+	_OMAP4_MUXENTRY(JTAG_TDO, 0, "jtag_tdo", NULL, NULL, NULL, NULL, NULL,
+			NULL, NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Balls for 44XX CBL & CBS package - wakeup partition
+ * 547-pin CBL ES1.0 S-FPGA-N547, 0.40mm Ball Pitch (Top),
+ *				  0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
+		&& defined(CONFIG_OMAP_PACKAGE_CBL)
+struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = {
+	_OMAP4_BALLENTRY(SIM_IO, "h4", NULL),
+	_OMAP4_BALLENTRY(SIM_CLK, "j2", NULL),
+	_OMAP4_BALLENTRY(SIM_RESET, "g2", NULL),
+	_OMAP4_BALLENTRY(SIM_CD, "j1", NULL),
+	_OMAP4_BALLENTRY(SIM_PWRCTRL, "k1", NULL),
+	_OMAP4_BALLENTRY(SR_SCL, "ag9", NULL),
+	_OMAP4_BALLENTRY(SR_SDA, "af9", NULL),
+	_OMAP4_BALLENTRY(FREF_XTAL_IN, "ah6", NULL),
+	_OMAP4_BALLENTRY(FREF_SLICER_IN, "ag8", NULL),
+	_OMAP4_BALLENTRY(FREF_CLK_IOREQ, "ad1", NULL),
+	_OMAP4_BALLENTRY(FREF_CLK0_OUT, "ad2", NULL),
+	_OMAP4_BALLENTRY(FREF_CLK3_REQ, "ad3", NULL),
+	_OMAP4_BALLENTRY(FREF_CLK3_OUT, "ad4", NULL),
+	_OMAP4_BALLENTRY(FREF_CLK4_REQ, "ac2", NULL),
+	_OMAP4_BALLENTRY(FREF_CLK4_OUT, "ac3", NULL),
+	_OMAP4_BALLENTRY(SYS_32K, "ag7", NULL),
+	_OMAP4_BALLENTRY(SYS_NRESPWRON, "ae7", NULL),
+	_OMAP4_BALLENTRY(SYS_NRESWARM, "af7", NULL),
+	_OMAP4_BALLENTRY(SYS_PWR_REQ, "ah7", NULL),
+	_OMAP4_BALLENTRY(SYS_PWRON_RESET_OUT, "ag6", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT6, "af8", NULL),
+	_OMAP4_BALLENTRY(SYS_BOOT7, "ae8", NULL),
+	_OMAP4_BALLENTRY(JTAG_NTRST, "ah2", NULL),
+	_OMAP4_BALLENTRY(JTAG_TCK, "ag1", NULL),
+	_OMAP4_BALLENTRY(JTAG_RTCK, "ae3", NULL),
+	_OMAP4_BALLENTRY(JTAG_TMS_TMSC, "ah1", NULL),
+	_OMAP4_BALLENTRY(JTAG_TDI, "ae1", NULL),
+	_OMAP4_BALLENTRY(JTAG_TDO, "ae2", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap4_wkup_cbl_cbs_ball  NULL
+#endif
+
+int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+	struct omap_ball *package_balls_core;
+	struct omap_ball *package_balls_wkup = omap4_wkup_cbl_cbs_ball;
+	struct omap_mux *core_muxmodes;
+	int ret;
+
+	switch (flags & OMAP_PACKAGE_MASK) {
+	case OMAP_PACKAGE_CBL:
+		pr_debug("%s: OMAP4430 ES1.0 -> OMAP_PACKAGE_CBL\n", __func__);
+		package_balls_core = omap4_core_cbl_ball;
+		core_muxmodes = omap4_core_muxmodes;
+		break;
+	case OMAP_PACKAGE_CBS:
+		pr_debug("%s: OMAP4430 ES2.X -> OMAP_PACKAGE_CBS\n", __func__);
+		package_balls_core = omap4_core_cbs_ball;
+		core_muxmodes = omap4_es2_core_muxmodes;
+		break;
+	default:
+		pr_err("%s: Unknown omap package, mux disabled\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = omap_mux_init("core",
+			    OMAP_MUX_GPIO_IN_MODE3,
+			    OMAP4_CTRL_MODULE_PAD_CORE_MUX_PBASE,
+			    OMAP4_CTRL_MODULE_PAD_CORE_MUX_SIZE,
+			    core_muxmodes, NULL, board_subset,
+			    package_balls_core);
+	if (ret)
+		return ret;
+
+	ret = omap_mux_init("wkup",
+			    OMAP_MUX_GPIO_IN_MODE3,
+			    OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE,
+			    OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE,
+			    omap4_wkup_muxmodes, NULL, board_subset,
+			    package_balls_wkup);
+
+	return ret;
+}
+
diff --git a/arch/arm/mach-omap2/mux44xx.h b/arch/arm/mach-omap2/mux44xx.h
new file mode 100644
index 00000000000..c635026cd7e
--- /dev/null
+++ b/arch/arm/mach-omap2/mux44xx.h
@@ -0,0 +1,298 @@
+/*
+ * OMAP44xx MUX registers and bitfields
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_MUX_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_MUX_44XX_H
+
+#define OMAP4_MUX(M0, mux_value)					\
+{									\
+	.reg_offset	= (OMAP4_CTRL_MODULE_PAD_##M0##_OFFSET),	\
+	.value		= (mux_value),					\
+}
+
+/* ctrl_module_pad_core base address */
+#define OMAP4_CTRL_MODULE_PAD_CORE_MUX_PBASE			0x4a100000
+
+/* ctrl_module_pad_core registers offset */
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD0_OFFSET			0x0040
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD1_OFFSET			0x0042
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD2_OFFSET			0x0044
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD3_OFFSET			0x0046
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD4_OFFSET			0x0048
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD5_OFFSET			0x004a
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD6_OFFSET			0x004c
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD7_OFFSET			0x004e
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD8_OFFSET			0x0050
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD9_OFFSET			0x0052
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD10_OFFSET			0x0054
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD11_OFFSET			0x0056
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD12_OFFSET			0x0058
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD13_OFFSET			0x005a
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD14_OFFSET			0x005c
+#define OMAP4_CTRL_MODULE_PAD_GPMC_AD15_OFFSET			0x005e
+#define OMAP4_CTRL_MODULE_PAD_GPMC_A16_OFFSET			0x0060
+#define OMAP4_CTRL_MODULE_PAD_GPMC_A17_OFFSET			0x0062
+#define OMAP4_CTRL_MODULE_PAD_GPMC_A18_OFFSET			0x0064
+#define OMAP4_CTRL_MODULE_PAD_GPMC_A19_OFFSET			0x0066
+#define OMAP4_CTRL_MODULE_PAD_GPMC_A20_OFFSET			0x0068
+#define OMAP4_CTRL_MODULE_PAD_GPMC_A21_OFFSET			0x006a
+#define OMAP4_CTRL_MODULE_PAD_GPMC_A22_OFFSET			0x006c
+#define OMAP4_CTRL_MODULE_PAD_GPMC_A23_OFFSET			0x006e
+#define OMAP4_CTRL_MODULE_PAD_GPMC_A24_OFFSET			0x0070
+#define OMAP4_CTRL_MODULE_PAD_GPMC_A25_OFFSET			0x0072
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS0_OFFSET			0x0074
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS1_OFFSET			0x0076
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS2_OFFSET			0x0078
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS3_OFFSET			0x007a
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NWP_OFFSET			0x007c
+#define OMAP4_CTRL_MODULE_PAD_GPMC_CLK_OFFSET			0x007e
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NADV_ALE_OFFSET		0x0080
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NOE_OFFSET			0x0082
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NWE_OFFSET			0x0084
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NBE0_CLE_OFFSET		0x0086
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NBE1_OFFSET			0x0088
+#define OMAP4_CTRL_MODULE_PAD_GPMC_WAIT0_OFFSET			0x008a
+#define OMAP4_CTRL_MODULE_PAD_GPMC_WAIT1_OFFSET			0x008c
+#define OMAP4_CTRL_MODULE_PAD_C2C_DATA11_OFFSET			0x008e
+#define OMAP4_CTRL_MODULE_PAD_C2C_DATA12_OFFSET			0x0090
+#define OMAP4_CTRL_MODULE_PAD_C2C_DATA13_OFFSET			0x0092
+#define OMAP4_CTRL_MODULE_PAD_C2C_DATA14_OFFSET			0x0094
+#define OMAP4_CTRL_MODULE_PAD_C2C_DATA15_OFFSET			0x0096
+#define OMAP4_CTRL_MODULE_PAD_HDMI_HPD_OFFSET			0x0098
+#define OMAP4_CTRL_MODULE_PAD_HDMI_CEC_OFFSET			0x009a
+#define OMAP4_CTRL_MODULE_PAD_HDMI_DDC_SCL_OFFSET		0x009c
+#define OMAP4_CTRL_MODULE_PAD_HDMI_DDC_SDA_OFFSET		0x009e
+#define OMAP4_CTRL_MODULE_PAD_CSI21_DX0_OFFSET			0x00a0
+#define OMAP4_CTRL_MODULE_PAD_CSI21_DY0_OFFSET			0x00a2
+#define OMAP4_CTRL_MODULE_PAD_CSI21_DX1_OFFSET			0x00a4
+#define OMAP4_CTRL_MODULE_PAD_CSI21_DY1_OFFSET			0x00a6
+#define OMAP4_CTRL_MODULE_PAD_CSI21_DX2_OFFSET			0x00a8
+#define OMAP4_CTRL_MODULE_PAD_CSI21_DY2_OFFSET			0x00aa
+#define OMAP4_CTRL_MODULE_PAD_CSI21_DX3_OFFSET			0x00ac
+#define OMAP4_CTRL_MODULE_PAD_CSI21_DY3_OFFSET			0x00ae
+#define OMAP4_CTRL_MODULE_PAD_CSI21_DX4_OFFSET			0x00b0
+#define OMAP4_CTRL_MODULE_PAD_CSI21_DY4_OFFSET			0x00b2
+#define OMAP4_CTRL_MODULE_PAD_CSI22_DX0_OFFSET			0x00b4
+#define OMAP4_CTRL_MODULE_PAD_CSI22_DY0_OFFSET			0x00b6
+#define OMAP4_CTRL_MODULE_PAD_CSI22_DX1_OFFSET			0x00b8
+#define OMAP4_CTRL_MODULE_PAD_CSI22_DY1_OFFSET			0x00ba
+#define OMAP4_CTRL_MODULE_PAD_CAM_SHUTTER_OFFSET		0x00bc
+#define OMAP4_CTRL_MODULE_PAD_CAM_STROBE_OFFSET			0x00be
+#define OMAP4_CTRL_MODULE_PAD_CAM_GLOBALRESET_OFFSET		0x00c0
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_CLK_OFFSET		0x00c2
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_STP_OFFSET		0x00c4
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DIR_OFFSET		0x00c6
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_NXT_OFFSET		0x00c8
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT0_OFFSET		0x00ca
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT1_OFFSET		0x00cc
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT2_OFFSET		0x00ce
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT3_OFFSET		0x00d0
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT4_OFFSET		0x00d2
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT5_OFFSET		0x00d4
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT6_OFFSET		0x00d6
+#define OMAP4_CTRL_MODULE_PAD_USBB1_ULPITLL_DAT7_OFFSET		0x00d8
+#define OMAP4_CTRL_MODULE_PAD_USBB1_HSIC_DATA_OFFSET		0x00da
+#define OMAP4_CTRL_MODULE_PAD_USBB1_HSIC_STROBE_OFFSET		0x00dc
+#define OMAP4_CTRL_MODULE_PAD_USBC1_ICUSB_DP_OFFSET		0x00de
+#define OMAP4_CTRL_MODULE_PAD_USBC1_ICUSB_DM_OFFSET		0x00e0
+#define OMAP4_CTRL_MODULE_PAD_SDMMC1_CLK_OFFSET			0x00e2
+#define OMAP4_CTRL_MODULE_PAD_SDMMC1_CMD_OFFSET			0x00e4
+#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT0_OFFSET		0x00e6
+#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT1_OFFSET		0x00e8
+#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT2_OFFSET		0x00ea
+#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT3_OFFSET		0x00ec
+#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT4_OFFSET		0x00ee
+#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT5_OFFSET		0x00f0
+#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT6_OFFSET		0x00f2
+#define OMAP4_CTRL_MODULE_PAD_SDMMC1_DAT7_OFFSET		0x00f4
+#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP2_CLKX_OFFSET		0x00f6
+#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP2_DR_OFFSET		0x00f8
+#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP2_DX_OFFSET		0x00fa
+#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP2_FSX_OFFSET		0x00fc
+#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP1_CLKX_OFFSET		0x00fe
+#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP1_DR_OFFSET		0x0100
+#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP1_DX_OFFSET		0x0102
+#define OMAP4_CTRL_MODULE_PAD_ABE_MCBSP1_FSX_OFFSET		0x0104
+#define OMAP4_CTRL_MODULE_PAD_ABE_PDM_UL_DATA_OFFSET		0x0106
+#define OMAP4_CTRL_MODULE_PAD_ABE_PDM_DL_DATA_OFFSET		0x0108
+#define OMAP4_CTRL_MODULE_PAD_ABE_PDM_FRAME_OFFSET		0x010a
+#define OMAP4_CTRL_MODULE_PAD_ABE_PDM_LB_CLK_OFFSET		0x010c
+#define OMAP4_CTRL_MODULE_PAD_ABE_CLKS_OFFSET			0x010e
+#define OMAP4_CTRL_MODULE_PAD_ABE_DMIC_CLK1_OFFSET		0x0110
+#define OMAP4_CTRL_MODULE_PAD_ABE_DMIC_DIN1_OFFSET		0x0112
+#define OMAP4_CTRL_MODULE_PAD_ABE_DMIC_DIN2_OFFSET		0x0114
+#define OMAP4_CTRL_MODULE_PAD_ABE_DMIC_DIN3_OFFSET		0x0116
+#define OMAP4_CTRL_MODULE_PAD_UART2_CTS_OFFSET			0x0118
+#define OMAP4_CTRL_MODULE_PAD_UART2_RTS_OFFSET			0x011a
+#define OMAP4_CTRL_MODULE_PAD_UART2_RX_OFFSET			0x011c
+#define OMAP4_CTRL_MODULE_PAD_UART2_TX_OFFSET			0x011e
+#define OMAP4_CTRL_MODULE_PAD_HDQ_SIO_OFFSET			0x0120
+#define OMAP4_CTRL_MODULE_PAD_I2C1_SCL_OFFSET			0x0122
+#define OMAP4_CTRL_MODULE_PAD_I2C1_SDA_OFFSET			0x0124
+#define OMAP4_CTRL_MODULE_PAD_I2C2_SCL_OFFSET			0x0126
+#define OMAP4_CTRL_MODULE_PAD_I2C2_SDA_OFFSET			0x0128
+#define OMAP4_CTRL_MODULE_PAD_I2C3_SCL_OFFSET			0x012a
+#define OMAP4_CTRL_MODULE_PAD_I2C3_SDA_OFFSET			0x012c
+#define OMAP4_CTRL_MODULE_PAD_I2C4_SCL_OFFSET			0x012e
+#define OMAP4_CTRL_MODULE_PAD_I2C4_SDA_OFFSET			0x0130
+#define OMAP4_CTRL_MODULE_PAD_MCSPI1_CLK_OFFSET			0x0132
+#define OMAP4_CTRL_MODULE_PAD_MCSPI1_SOMI_OFFSET		0x0134
+#define OMAP4_CTRL_MODULE_PAD_MCSPI1_SIMO_OFFSET		0x0136
+#define OMAP4_CTRL_MODULE_PAD_MCSPI1_CS0_OFFSET			0x0138
+#define OMAP4_CTRL_MODULE_PAD_MCSPI1_CS1_OFFSET			0x013a
+#define OMAP4_CTRL_MODULE_PAD_MCSPI1_CS2_OFFSET			0x013c
+#define OMAP4_CTRL_MODULE_PAD_MCSPI1_CS3_OFFSET			0x013e
+#define OMAP4_CTRL_MODULE_PAD_UART3_CTS_RCTX_OFFSET		0x0140
+#define OMAP4_CTRL_MODULE_PAD_UART3_RTS_SD_OFFSET		0x0142
+#define OMAP4_CTRL_MODULE_PAD_UART3_RX_IRRX_OFFSET		0x0144
+#define OMAP4_CTRL_MODULE_PAD_UART3_TX_IRTX_OFFSET		0x0146
+#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CLK_OFFSET			0x0148
+#define OMAP4_CTRL_MODULE_PAD_SDMMC5_CMD_OFFSET			0x014a
+#define OMAP4_CTRL_MODULE_PAD_SDMMC5_DAT0_OFFSET		0x014c
+#define OMAP4_CTRL_MODULE_PAD_SDMMC5_DAT1_OFFSET		0x014e
+#define OMAP4_CTRL_MODULE_PAD_SDMMC5_DAT2_OFFSET		0x0150
+#define OMAP4_CTRL_MODULE_PAD_SDMMC5_DAT3_OFFSET		0x0152
+#define OMAP4_CTRL_MODULE_PAD_MCSPI4_CLK_OFFSET			0x0154
+#define OMAP4_CTRL_MODULE_PAD_MCSPI4_SIMO_OFFSET		0x0156
+#define OMAP4_CTRL_MODULE_PAD_MCSPI4_SOMI_OFFSET		0x0158
+#define OMAP4_CTRL_MODULE_PAD_MCSPI4_CS0_OFFSET			0x015a
+#define OMAP4_CTRL_MODULE_PAD_UART4_RX_OFFSET			0x015c
+#define OMAP4_CTRL_MODULE_PAD_UART4_TX_OFFSET			0x015e
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_CLK_OFFSET		0x0160
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_STP_OFFSET		0x0162
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DIR_OFFSET		0x0164
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_NXT_OFFSET		0x0166
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT0_OFFSET		0x0168
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT1_OFFSET		0x016a
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT2_OFFSET		0x016c
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT3_OFFSET		0x016e
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT4_OFFSET		0x0170
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT5_OFFSET		0x0172
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT6_OFFSET		0x0174
+#define OMAP4_CTRL_MODULE_PAD_USBB2_ULPITLL_DAT7_OFFSET		0x0176
+#define OMAP4_CTRL_MODULE_PAD_USBB2_HSIC_DATA_OFFSET		0x0178
+#define OMAP4_CTRL_MODULE_PAD_USBB2_HSIC_STROBE_OFFSET		0x017a
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TX0_OFFSET			0x017c
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TY0_OFFSET			0x017e
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TX1_OFFSET			0x0180
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TY1_OFFSET			0x0182
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TX2_OFFSET			0x0184
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_TY2_OFFSET			0x0186
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RX0_OFFSET			0x0188
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RY0_OFFSET			0x018a
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RX1_OFFSET			0x018c
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RY1_OFFSET			0x018e
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RX2_OFFSET			0x0190
+#define OMAP4_CTRL_MODULE_PAD_UNIPRO_RY2_OFFSET			0x0192
+#define OMAP4_CTRL_MODULE_PAD_USBA0_OTG_CE_OFFSET		0x0194
+#define OMAP4_CTRL_MODULE_PAD_USBA0_OTG_DP_OFFSET		0x0196
+#define OMAP4_CTRL_MODULE_PAD_USBA0_OTG_DM_OFFSET		0x0198
+#define OMAP4_CTRL_MODULE_PAD_FREF_CLK1_OUT_OFFSET		0x019a
+#define OMAP4_CTRL_MODULE_PAD_FREF_CLK2_OUT_OFFSET		0x019c
+#define OMAP4_CTRL_MODULE_PAD_SYS_NIRQ1_OFFSET			0x019e
+#define OMAP4_CTRL_MODULE_PAD_SYS_NIRQ2_OFFSET			0x01a0
+#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT0_OFFSET			0x01a2
+#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT1_OFFSET			0x01a4
+#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT2_OFFSET			0x01a6
+#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT3_OFFSET			0x01a8
+#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT4_OFFSET			0x01aa
+#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT5_OFFSET			0x01ac
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU0_OFFSET			0x01ae
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU1_OFFSET			0x01b0
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU2_OFFSET			0x01b2
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU3_OFFSET			0x01b4
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU4_OFFSET			0x01b6
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU5_OFFSET			0x01b8
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU6_OFFSET			0x01ba
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU7_OFFSET			0x01bc
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU8_OFFSET			0x01be
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU9_OFFSET			0x01c0
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU10_OFFSET			0x01c2
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU11_OFFSET			0x01c4
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU12_OFFSET			0x01c6
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU13_OFFSET			0x01c8
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU14_OFFSET			0x01ca
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU15_OFFSET			0x01cc
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU16_OFFSET			0x01ce
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU17_OFFSET			0x01d0
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU18_OFFSET			0x01d2
+#define OMAP4_CTRL_MODULE_PAD_DPM_EMU19_OFFSET			0x01d4
+
+/* ES2.0 only */
+#define OMAP4_CTRL_MODULE_PAD_GPMC_WAIT2_OFFSET			0x008e
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS4_OFFSET			0x0090
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS5_OFFSET			0x0092
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS6_OFFSET			0x0094
+#define OMAP4_CTRL_MODULE_PAD_GPMC_NCS7_OFFSET			0x0096
+
+#define OMAP4_CTRL_MODULE_PAD_KPD_COL3_OFFSET			0x017c
+#define OMAP4_CTRL_MODULE_PAD_KPD_COL4_OFFSET			0x017e
+#define OMAP4_CTRL_MODULE_PAD_KPD_COL5_OFFSET			0x0180
+#define OMAP4_CTRL_MODULE_PAD_KPD_COL0_OFFSET			0x0182
+#define OMAP4_CTRL_MODULE_PAD_KPD_COL1_OFFSET			0x0184
+#define OMAP4_CTRL_MODULE_PAD_KPD_COL2_OFFSET			0x0186
+#define OMAP4_CTRL_MODULE_PAD_KPD_ROW3_OFFSET			0x0188
+#define OMAP4_CTRL_MODULE_PAD_KPD_ROW4_OFFSET			0x018a
+#define OMAP4_CTRL_MODULE_PAD_KPD_ROW5_OFFSET			0x018c
+#define OMAP4_CTRL_MODULE_PAD_KPD_ROW0_OFFSET			0x018e
+#define OMAP4_CTRL_MODULE_PAD_KPD_ROW1_OFFSET			0x0190
+#define OMAP4_CTRL_MODULE_PAD_KPD_ROW2_OFFSET			0x0192
+
+
+#define OMAP4_CTRL_MODULE_PAD_CORE_MUX_SIZE			\
+		(OMAP4_CTRL_MODULE_PAD_DPM_EMU19_OFFSET		\
+		 - OMAP4_CTRL_MODULE_PAD_GPMC_AD0_OFFSET + 2)
+
+/* ctrl_module_pad_wkup base address */
+#define OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE			0x4a31e000
+
+/* ctrl_module_pad_wkup registers offset */
+#define OMAP4_CTRL_MODULE_PAD_SIM_IO_OFFSET			0x0040
+#define OMAP4_CTRL_MODULE_PAD_SIM_CLK_OFFSET			0x0042
+#define OMAP4_CTRL_MODULE_PAD_SIM_RESET_OFFSET			0x0044
+#define OMAP4_CTRL_MODULE_PAD_SIM_CD_OFFSET			0x0046
+#define OMAP4_CTRL_MODULE_PAD_SIM_PWRCTRL_OFFSET		0x0048
+#define OMAP4_CTRL_MODULE_PAD_SR_SCL_OFFSET			0x004a
+#define OMAP4_CTRL_MODULE_PAD_SR_SDA_OFFSET			0x004c
+#define OMAP4_CTRL_MODULE_PAD_FREF_XTAL_IN_OFFSET		0x004e
+#define OMAP4_CTRL_MODULE_PAD_FREF_SLICER_IN_OFFSET		0x0050
+#define OMAP4_CTRL_MODULE_PAD_FREF_CLK_IOREQ_OFFSET		0x0052
+#define OMAP4_CTRL_MODULE_PAD_FREF_CLK0_OUT_OFFSET		0x0054
+#define OMAP4_CTRL_MODULE_PAD_FREF_CLK3_REQ_OFFSET		0x0056
+#define OMAP4_CTRL_MODULE_PAD_FREF_CLK3_OUT_OFFSET		0x0058
+#define OMAP4_CTRL_MODULE_PAD_FREF_CLK4_REQ_OFFSET		0x005a
+#define OMAP4_CTRL_MODULE_PAD_FREF_CLK4_OUT_OFFSET		0x005c
+#define OMAP4_CTRL_MODULE_PAD_SYS_32K_OFFSET			0x005e
+#define OMAP4_CTRL_MODULE_PAD_SYS_NRESPWRON_OFFSET		0x0060
+#define OMAP4_CTRL_MODULE_PAD_SYS_NRESWARM_OFFSET		0x0062
+#define OMAP4_CTRL_MODULE_PAD_SYS_PWR_REQ_OFFSET		0x0064
+#define OMAP4_CTRL_MODULE_PAD_SYS_PWRON_RESET_OUT_OFFSET	0x0066
+#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT6_OFFSET			0x0068
+#define OMAP4_CTRL_MODULE_PAD_SYS_BOOT7_OFFSET			0x006a
+#define OMAP4_CTRL_MODULE_PAD_JTAG_NTRST_OFFSET			0x006c
+#define OMAP4_CTRL_MODULE_PAD_JTAG_TCK_OFFSET			0x006e
+#define OMAP4_CTRL_MODULE_PAD_JTAG_RTCK_OFFSET			0x0070
+#define OMAP4_CTRL_MODULE_PAD_JTAG_TMS_TMSC_OFFSET		0x0072
+#define OMAP4_CTRL_MODULE_PAD_JTAG_TDI_OFFSET			0x0074
+#define OMAP4_CTRL_MODULE_PAD_JTAG_TDO_OFFSET			0x0076
+
+#define OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE			\
+		(OMAP4_CTRL_MODULE_PAD_JTAG_TDO_OFFSET		\
+		 - OMAP4_CTRL_MODULE_PAD_SIM_IO_OFFSET + 2)
+
+#endif
diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c
index 6cee456ca54..4976b9393e4 100644
--- a/arch/arm/mach-omap2/omap-hotplug.c
+++ b/arch/arm/mach-omap2/omap-hotplug.c
@@ -17,16 +17,13 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 #include <mach/omap4-common.h>
 
-static DECLARE_COMPLETION(cpu_killed);
-
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -35,15 +32,6 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		pr_crit("platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-	pr_notice("CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
 	flush_cache_all();
 	dsb();
 
diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c
index f5a1aad1a5c..3fc5dc7233d 100644
--- a/arch/arm/mach-omap2/omap-iommu.c
+++ b/arch/arm/mach-omap2/omap-iommu.c
@@ -33,9 +33,11 @@ static struct iommu_device omap3_devices[] = {
 			.name = "isp",
 			.nr_tlb_entries = 8,
 			.clk_name = "cam_ick",
+			.da_start = 0x0,
+			.da_end = 0xFFFFF000,
 		},
 	},
-#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+#if defined(CONFIG_OMAP_IOMMU_IVA2)
 	{
 		.base = 0x5d000000,
 		.irq = 28,
@@ -43,6 +45,8 @@ static struct iommu_device omap3_devices[] = {
 			.name = "iva2",
 			.nr_tlb_entries = 32,
 			.clk_name = "iva2_ck",
+			.da_start = 0x11000000,
+			.da_end = 0xFFFFF000,
 		},
 	},
 #endif
@@ -64,6 +68,8 @@ static struct iommu_device omap4_devices[] = {
 			.name = "ducati",
 			.nr_tlb_entries = 32,
 			.clk_name = "ducati_ick",
+			.da_start = 0x0,
+			.da_end = 0xFFFFF000,
 		},
 	},
 #if defined(CONFIG_MPU_TESLA_IOMMU)
@@ -74,6 +80,8 @@ static struct iommu_device omap4_devices[] = {
 			.name = "tesla",
 			.nr_tlb_entries = 32,
 			.clk_name = "tesla_ick",
+			.da_start = 0x0,
+			.da_end = 0xFFFFF000,
 		},
 	},
 #endif
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 9e9f70e18e3..b66cfe8bc46 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -21,7 +21,6 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
 #include <mach/omap4-common.h>
@@ -29,28 +28,16 @@
 /* SCU base address */
 static void __iomem *scu_base;
 
-/*
- * Use SCU config register to count number of cores
- */
-static inline unsigned int get_core_count(void)
-{
-	if (scu_base)
-		return scu_get_core_count(scu_base);
-	return 1;
-}
-
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * If any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(0, gic_cpu_base_addr);
+	gic_secondary_init(0);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -76,7 +63,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	omap_modify_auxcoreboot0(0x200, 0xfffffdff);
 	flush_cache_all();
 	smp_wmb();
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	/*
 	 * Now the secondary core is starting up let it run its
@@ -118,25 +105,9 @@ void __init smp_init_cpus(void)
 	scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
 	BUG_ON(!scu_base);
 
-	ncores = get_core_count();
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	unsigned int ncores = get_core_count();
-	unsigned int cpu = smp_processor_id();
-	int i;
+	ncores = scu_get_core_count(scu_base);
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "OMAP4: strange core count of 0? Default to 1\n");
-		ncores = 1;
-	}
-
 	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "OMAP4: no. of cores (%d) greater than configured "
@@ -144,13 +115,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		       ncores, NR_CPUS);
 		ncores = NR_CPUS;
 	}
-	smp_store_cpu_info(cpu);
 
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int i;
 
 	/*
 	 * Initialise the present map, which describes the set of CPUs
@@ -159,18 +131,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		/*
-		 * Initialise the SCU and wake up the secondary core using
-		 * wakeup_secondary().
-		 */
-		scu_enable(scu_base);
-		wakeup_secondary();
-	}
+	/*
+	 * Initialise the SCU and wake up the secondary core using
+	 * wakeup_secondary().
+	 */
+	scu_enable(scu_base);
+	wakeup_secondary();
 }
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 2f895553e6a..19268647ce3 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -26,21 +26,22 @@
 void __iomem *l2cache_base;
 #endif
 
-void __iomem *gic_cpu_base_addr;
 void __iomem *gic_dist_base_addr;
 
 
 void __init gic_init_irq(void)
 {
+	void __iomem *gic_cpu_base;
+
 	/* Static mapping, never released */
 	gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
 	BUG_ON(!gic_dist_base_addr);
-	gic_dist_init(0, gic_dist_base_addr, 29);
 
 	/* Static mapping, never released */
-	gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
-	BUG_ON(!gic_cpu_base_addr);
-	gic_cpu_init(0, gic_cpu_base_addr);
+	gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+	BUG_ON(!gic_cpu_base);
+
+	gic_init(0, 29, gic_dist_base_addr, gic_cpu_base);
 }
 
 #ifdef CONFIG_CACHE_L2X0
@@ -53,6 +54,8 @@ static void omap4_l2x0_disable(void)
 
 static int __init omap_l2_cache_init(void)
 {
+	u32 aux_ctrl = 0;
+
 	/*
 	 * To avoid code running on other OMAPs in
 	 * multi-omap builds
@@ -64,18 +67,32 @@ static int __init omap_l2_cache_init(void)
 	l2cache_base = ioremap(OMAP44XX_L2CACHE_BASE, SZ_4K);
 	BUG_ON(!l2cache_base);
 
-	/* Enable PL310 L2 Cache controller */
-	omap_smc1(0x102, 0x1);
-
 	/*
 	 * 16-way associativity, parity disabled
 	 * Way size - 32KB (es1.0)
 	 * Way size - 64KB (es2.0 +)
 	 */
-	if (omap_rev() == OMAP4430_REV_ES1_0)
-		l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
-	else
-		l2x0_init(l2cache_base, 0x0e070000, 0xc0000fff);
+	aux_ctrl = ((1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT) |
+			(0x1 << 25) |
+			(0x1 << L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT) |
+			(0x1 << L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT));
+
+	if (omap_rev() == OMAP4430_REV_ES1_0) {
+		aux_ctrl |= 0x2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT;
+	} else {
+		aux_ctrl |= ((0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT) |
+			(1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) |
+			(1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) |
+			(1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) |
+			(1 << L2X0_AUX_CTRL_EARLY_BRESP_SHIFT));
+	}
+	if (omap_rev() != OMAP4430_REV_ES1_0)
+		omap_smc1(0x109, aux_ctrl);
+
+	/* Enable PL310 L2 Cache controller */
+	omap_smc1(0x102, 0x1);
+
+	l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
 
 	/*
 	 * Override default outer_cache.disable with a OMAP4
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5a30658444d..e282e35769f 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -116,7 +116,6 @@
  * - Open Core Protocol Specification 2.2
  *
  * To do:
- * - pin mux handling
  * - handle IO mapping
  * - bus throughput & module latency measurement code
  *
@@ -135,17 +134,21 @@
 #include <linux/err.h>
 #include <linux/list.h>
 #include <linux/mutex.h>
+#include <linux/spinlock.h>
 
 #include <plat/common.h>
 #include <plat/cpu.h>
-#include <plat/clockdomain.h>
-#include <plat/powerdomain.h>
+#include "clockdomain.h"
+#include "powerdomain.h"
 #include <plat/clock.h>
 #include <plat/omap_hwmod.h>
 #include <plat/prcm.h>
 
-#include "cm.h"
-#include "prm.h"
+#include "cm2xxx_3xxx.h"
+#include "cm44xx.h"
+#include "prm2xxx_3xxx.h"
+#include "prm44xx.h"
+#include "mux.h"
 
 /* Maximum microseconds to wait for OMAP module to softreset */
 #define MAX_MODULE_SOFTRESET_WAIT	10000
@@ -156,8 +159,6 @@
 /* omap_hwmod_list contains all registered struct omap_hwmods */
 static LIST_HEAD(omap_hwmod_list);
 
-static DEFINE_MUTEX(omap_hwmod_mutex);
-
 /* mpu_oh: used to add/remove MPU initiator from sleepdep list */
 static struct omap_hwmod *mpu_oh;
 
@@ -209,10 +210,9 @@ static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
 
 	/* XXX ensure module interface clock is up */
 
-	if (oh->_sysc_cache != v) {
-		oh->_sysc_cache = v;
-		omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);
-	}
+	/* Module might have lost context, always update cache and register */
+	oh->_sysc_cache = v;
+	omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);
 }
 
 /**
@@ -388,12 +388,13 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
  * Allow the hardware module @oh to send wakeups.  Returns -EINVAL
  * upon error or 0 upon success.
  */
-static int _enable_wakeup(struct omap_hwmod *oh)
+static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
 {
-	u32 v, wakeup_mask;
+	u32 wakeup_mask;
 
 	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
+	    !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
+	      (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)))
 		return -EINVAL;
 
 	if (!oh->class->sysc->sysc_fields) {
@@ -403,9 +404,10 @@ static int _enable_wakeup(struct omap_hwmod *oh)
 
 	wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
 
-	v = oh->_sysc_cache;
-	v |= wakeup_mask;
-	_write_sysconfig(v, oh);
+	*v |= wakeup_mask;
+
+	if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+		_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
 
@@ -421,12 +423,13 @@ static int _enable_wakeup(struct omap_hwmod *oh)
  * Prevent the hardware module @oh to send wakeups.  Returns -EINVAL
  * upon error or 0 upon success.
  */
-static int _disable_wakeup(struct omap_hwmod *oh)
+static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
 {
-	u32 v, wakeup_mask;
+	u32 wakeup_mask;
 
 	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
+	    !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
+	      (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)))
 		return -EINVAL;
 
 	if (!oh->class->sysc->sysc_fields) {
@@ -436,9 +439,10 @@ static int _disable_wakeup(struct omap_hwmod *oh)
 
 	wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
 
-	v = oh->_sysc_cache;
-	v &= ~wakeup_mask;
-	_write_sysconfig(v, oh);
+	*v &= ~wakeup_mask;
+
+	if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+		_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
 
 	/* XXX test pwrdm_get_wken for this hwmod's subsystem */
 
@@ -675,7 +679,7 @@ static void _disable_optional_clocks(struct omap_hwmod *oh)
  * Returns the array index of the OCP slave port that the MPU
  * addresses the device on, or -EINVAL upon error or not found.
  */
-static int _find_mpu_port_index(struct omap_hwmod *oh)
+static int __init _find_mpu_port_index(struct omap_hwmod *oh)
 {
 	int i;
 	int found = 0;
@@ -709,7 +713,7 @@ static int _find_mpu_port_index(struct omap_hwmod *oh)
  * Return the virtual address of the base of the register target of
  * device @oh, or NULL on error.
  */
-static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
+static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 {
 	struct omap_hwmod_ocp_if *os;
 	struct omap_hwmod_addr_space *mem;
@@ -786,11 +790,11 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	_write_sysconfig(v, oh);
-
 	/* If slave is in SMARTIDLE, also enable wakeup */
 	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
-		_enable_wakeup(oh);
+		_enable_wakeup(oh, &v);
+
+	_write_sysconfig(v, oh);
 
 	/*
 	 * Set the autoidle bit only after setting the smartidle bit
@@ -836,6 +840,10 @@ static void _idle_sysc(struct omap_hwmod *oh)
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
+	/* If slave is in SMARTIDLE, also enable wakeup */
+	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
+		_enable_wakeup(oh, &v);
+
 	_write_sysconfig(v, oh);
 }
 
@@ -874,7 +882,6 @@ static void _shutdown_sysc(struct omap_hwmod *oh)
  * @name: find an omap_hwmod by name
  *
  * Return a pointer to an omap_hwmod by name, or NULL if not found.
- * Caller must hold omap_hwmod_mutex.
  */
 static struct omap_hwmod *_lookup(const char *name)
 {
@@ -1089,7 +1096,7 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name)
 }
 
 /**
- * _reset - reset an omap_hwmod
+ * _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
  * @oh: struct omap_hwmod *
  *
  * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit.  hwmod must be
@@ -1098,12 +1105,13 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name)
  * the module did not reset in time, or 0 upon success.
  *
  * In OMAP3 a specific SYSSTATUS register is used to get the reset status.
- * Starting in OMAP4, some IPs does not have SYSSTATUS register and instead
+ * Starting in OMAP4, some IPs do not have SYSSTATUS registers and instead
  * use the SYSCONFIG softreset bit to provide the status.
  *
- * Note that some IP like McBSP does have a reset control but no reset status.
+ * Note that some IP like McBSP do have reset control but don't have
+ * reset status.
  */
-static int _reset(struct omap_hwmod *oh)
+static int _ocp_softreset(struct omap_hwmod *oh)
 {
 	u32 v;
 	int c = 0;
@@ -1124,7 +1132,7 @@ static int _reset(struct omap_hwmod *oh)
 	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
 		_enable_optional_clocks(oh);
 
-	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
+	pr_debug("omap_hwmod: %s: resetting via OCP SOFTRESET\n", oh->name);
 
 	v = oh->_sysc_cache;
 	ret = _set_softreset(oh, &v);
@@ -1164,17 +1172,41 @@ dis_opt_clks:
 }
 
 /**
- * _omap_hwmod_enable - enable an omap_hwmod
+ * _reset - reset an omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Resets an omap_hwmod @oh.  The default software reset mechanism for
+ * most OMAP IP blocks is triggered via the OCP_SYSCONFIG.SOFTRESET
+ * bit.  However, some hwmods cannot be reset via this method: some
+ * are not targets and therefore have no OCP header registers to
+ * access; others (like the IVA) have idiosyncratic reset sequences.
+ * So for these relatively rare cases, custom reset code can be
+ * supplied in the struct omap_hwmod_class .reset function pointer.
+ * Passes along the return value from either _reset() or the custom
+ * reset function - these must return -EINVAL if the hwmod cannot be
+ * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
+ * the module did not reset in time, or 0 upon success.
+ */
+static int _reset(struct omap_hwmod *oh)
+{
+	int ret;
+
+	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
+
+	ret = (oh->class->reset) ? oh->class->reset(oh) : _ocp_softreset(oh);
+
+	return ret;
+}
+
+/**
+ * _enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Enables an omap_hwmod @oh such that the MPU can access the hwmod's
- * register target.  (This function has a full name --
- * _omap_hwmod_enable() rather than simply _enable() -- because it is
- * currently required by the pm34xx.c idle loop.)  Returns -EINVAL if
- * the hwmod is in the wrong state or passes along the return value of
- * _wait_target_ready().
+ * register target.  Returns -EINVAL if the hwmod is in the wrong
+ * state or passes along the return value of _wait_target_ready().
  */
-int _omap_hwmod_enable(struct omap_hwmod *oh)
+static int _enable(struct omap_hwmod *oh)
 {
 	int r;
 
@@ -1197,7 +1229,9 @@ int _omap_hwmod_enable(struct omap_hwmod *oh)
 	     oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
 		_deassert_hardreset(oh, oh->rst_lines[0].name);
 
-	/* XXX mux balls */
+	/* Mux pins for device runtime if populated */
+	if (oh->mux)
+		omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
 
 	_add_initiator_dep(oh, mpu_oh);
 	_enable_clocks(oh);
@@ -1213,6 +1247,7 @@ int _omap_hwmod_enable(struct omap_hwmod *oh)
 			_enable_sysc(oh);
 		}
 	} else {
+		_disable_clocks(oh);
 		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
 			 oh->name, r);
 	}
@@ -1221,16 +1256,14 @@ int _omap_hwmod_enable(struct omap_hwmod *oh)
 }
 
 /**
- * _omap_hwmod_idle - idle an omap_hwmod
+ * _idle - idle an omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Idles an omap_hwmod @oh.  This should be called once the hwmod has
- * no further work.  (This function has a full name --
- * _omap_hwmod_idle() rather than simply _idle() -- because it is
- * currently required by the pm34xx.c idle loop.)  Returns -EINVAL if
- * the hwmod is in the wrong state or returns 0.
+ * no further work.  Returns -EINVAL if the hwmod is in the wrong
+ * state or returns 0.
  */
-int _omap_hwmod_idle(struct omap_hwmod *oh)
+static int _idle(struct omap_hwmod *oh)
 {
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
 		WARN(1, "omap_hwmod: %s: idle state can only be entered from "
@@ -1245,6 +1278,10 @@ int _omap_hwmod_idle(struct omap_hwmod *oh)
 	_del_initiator_dep(oh, mpu_oh);
 	_disable_clocks(oh);
 
+	/* Mux pins for device idle if populated */
+	if (oh->mux)
+		omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
+
 	oh->_state = _HWMOD_STATE_IDLE;
 
 	return 0;
@@ -1261,6 +1298,9 @@ int _omap_hwmod_idle(struct omap_hwmod *oh)
  */
 static int _shutdown(struct omap_hwmod *oh)
 {
+	int ret;
+	u8 prev_state;
+
 	if (oh->_state != _HWMOD_STATE_IDLE &&
 	    oh->_state != _HWMOD_STATE_ENABLED) {
 		WARN(1, "omap_hwmod: %s: disabled state can only be entered "
@@ -1270,6 +1310,18 @@ static int _shutdown(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
 
+	if (oh->class->pre_shutdown) {
+		prev_state = oh->_state;
+		if (oh->_state == _HWMOD_STATE_IDLE)
+			_enable(oh);
+		ret = oh->class->pre_shutdown(oh);
+		if (ret) {
+			if (prev_state == _HWMOD_STATE_IDLE)
+				_idle(oh);
+			return ret;
+		}
+	}
+
 	if (oh->class->sysc)
 		_shutdown_sysc(oh);
 
@@ -1288,7 +1340,9 @@ static int _shutdown(struct omap_hwmod *oh)
 	}
 	/* XXX Should this code also force-disable the optional clocks? */
 
-	/* XXX mux any associated balls to safe mode */
+	/* Mux pins to safe mode or use populated off mode values */
+	if (oh->mux)
+		omap_hwmod_mux(oh->mux, _HWMOD_STATE_DISABLED);
 
 	oh->_state = _HWMOD_STATE_DISABLED;
 
@@ -1298,23 +1352,15 @@ static int _shutdown(struct omap_hwmod *oh)
 /**
  * _setup - do initial configuration of omap_hwmod
  * @oh: struct omap_hwmod *
- * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1
  *
  * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register.  @skip_setup_idle is intended to be used on
- * a system that will not call omap_hwmod_enable() to enable devices
- * (e.g., a system without PM runtime).  Returns -EINVAL if the hwmod
- * is in the wrong state or returns 0.
+ * OCP_SYSCONFIG register.  Returns -EINVAL if the hwmod is in the
+ * wrong state or returns 0.
  */
 static int _setup(struct omap_hwmod *oh, void *data)
 {
 	int i, r;
-	u8 skip_setup_idle;
-
-	if (!oh || !data)
-		return -EINVAL;
-
-	skip_setup_idle = *(u8 *)data;
+	u8 postsetup_state;
 
 	/* Set iclk autoidle mode */
 	if (oh->slaves_cnt > 0) {
@@ -1334,7 +1380,6 @@ static int _setup(struct omap_hwmod *oh, void *data)
 		}
 	}
 
-	mutex_init(&oh->_mutex);
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
 	/*
@@ -1347,7 +1392,7 @@ static int _setup(struct omap_hwmod *oh, void *data)
 	if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1)
 		return 0;
 
-	r = _omap_hwmod_enable(oh);
+	r = _enable(oh);
 	if (r) {
 		pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
 			   oh->name, oh->_state);
@@ -1359,7 +1404,7 @@ static int _setup(struct omap_hwmod *oh, void *data)
 
 		/*
 		 * OCP_SYSCONFIG bits need to be reprogrammed after a softreset.
-		 * The _omap_hwmod_enable() function should be split to
+		 * The _enable() function should be split to
 		 * avoid the rewrite of the OCP_SYSCONFIG register.
 		 */
 		if (oh->class->sysc) {
@@ -1368,12 +1413,77 @@ static int _setup(struct omap_hwmod *oh, void *data)
 		}
 	}
 
-	if (!(oh->flags & HWMOD_INIT_NO_IDLE) && !skip_setup_idle)
-		_omap_hwmod_idle(oh);
+	postsetup_state = oh->_postsetup_state;
+	if (postsetup_state == _HWMOD_STATE_UNKNOWN)
+		postsetup_state = _HWMOD_STATE_ENABLED;
+
+	/*
+	 * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data -
+	 * it should be set by the core code as a runtime flag during startup
+	 */
+	if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
+	    (postsetup_state == _HWMOD_STATE_IDLE))
+		postsetup_state = _HWMOD_STATE_ENABLED;
+
+	if (postsetup_state == _HWMOD_STATE_IDLE)
+		_idle(oh);
+	else if (postsetup_state == _HWMOD_STATE_DISABLED)
+		_shutdown(oh);
+	else if (postsetup_state != _HWMOD_STATE_ENABLED)
+		WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
+		     oh->name, postsetup_state);
 
 	return 0;
 }
 
+/**
+ * _register - register a struct omap_hwmod
+ * @oh: struct omap_hwmod *
+ *
+ * Registers the omap_hwmod @oh.  Returns -EEXIST if an omap_hwmod
+ * already has been registered by the same name; -EINVAL if the
+ * omap_hwmod is in the wrong state, if @oh is NULL, if the
+ * omap_hwmod's class field is NULL; if the omap_hwmod is missing a
+ * name, or if the omap_hwmod's class is missing a name; or 0 upon
+ * success.
+ *
+ * XXX The data should be copied into bootmem, so the original data
+ * should be marked __initdata and freed after init.  This would allow
+ * unneeded omap_hwmods to be freed on multi-OMAP configurations.  Note
+ * that the copy process would be relatively complex due to the large number
+ * of substructures.
+ */
+static int __init _register(struct omap_hwmod *oh)
+{
+	int ret, ms_id;
+
+	if (!oh || !oh->name || !oh->class || !oh->class->name ||
+	    (oh->_state != _HWMOD_STATE_UNKNOWN))
+		return -EINVAL;
+
+	pr_debug("omap_hwmod: %s: registering\n", oh->name);
+
+	if (_lookup(oh->name))
+		return -EEXIST;
+
+	ms_id = _find_mpu_port_index(oh);
+	if (!IS_ERR_VALUE(ms_id)) {
+		oh->_mpu_port_index = ms_id;
+		oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
+	} else {
+		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
+	}
+
+	list_add_tail(&oh->node, &omap_hwmod_list);
+
+	spin_lock_init(&oh->_lock);
+
+	oh->_state = _HWMOD_STATE_REGISTERED;
+
+	ret = 0;
+
+	return ret;
+}
 
 
 /* Public functions */
@@ -1427,59 +1537,6 @@ int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode)
 }
 
 /**
- * omap_hwmod_register - register a struct omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Registers the omap_hwmod @oh.  Returns -EEXIST if an omap_hwmod
- * already has been registered by the same name; -EINVAL if the
- * omap_hwmod is in the wrong state, if @oh is NULL, if the
- * omap_hwmod's class field is NULL; if the omap_hwmod is missing a
- * name, or if the omap_hwmod's class is missing a name; or 0 upon
- * success.
- *
- * XXX The data should be copied into bootmem, so the original data
- * should be marked __initdata and freed after init.  This would allow
- * unneeded omap_hwmods to be freed on multi-OMAP configurations.  Note
- * that the copy process would be relatively complex due to the large number
- * of substructures.
- */
-int omap_hwmod_register(struct omap_hwmod *oh)
-{
-	int ret, ms_id;
-
-	if (!oh || !oh->name || !oh->class || !oh->class->name ||
-	    (oh->_state != _HWMOD_STATE_UNKNOWN))
-		return -EINVAL;
-
-	mutex_lock(&omap_hwmod_mutex);
-
-	pr_debug("omap_hwmod: %s: registering\n", oh->name);
-
-	if (_lookup(oh->name)) {
-		ret = -EEXIST;
-		goto ohr_unlock;
-	}
-
-	ms_id = _find_mpu_port_index(oh);
-	if (!IS_ERR_VALUE(ms_id)) {
-		oh->_mpu_port_index = ms_id;
-		oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
-	} else {
-		oh->_int_flags |= _HWMOD_NO_MPU_PORT;
-	}
-
-	list_add_tail(&oh->node, &omap_hwmod_list);
-
-	oh->_state = _HWMOD_STATE_REGISTERED;
-
-	ret = 0;
-
-ohr_unlock:
-	mutex_unlock(&omap_hwmod_mutex);
-	return ret;
-}
-
-/**
  * omap_hwmod_lookup - look up a registered omap_hwmod by name
  * @name: name of the omap_hwmod to look up
  *
@@ -1493,9 +1550,7 @@ struct omap_hwmod *omap_hwmod_lookup(const char *name)
 	if (!name)
 		return NULL;
 
-	mutex_lock(&omap_hwmod_mutex);
 	oh = _lookup(name);
-	mutex_unlock(&omap_hwmod_mutex);
 
 	return oh;
 }
@@ -1521,13 +1576,11 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 	if (!fn)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
 	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
 		ret = (*fn)(temp_oh, data);
 		if (ret)
 			break;
 	}
-	mutex_unlock(&omap_hwmod_mutex);
 
 	return ret;
 }
@@ -1542,7 +1595,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
  * listed in @ohs that are valid for this chip.  Returns -EINVAL if
  * omap_hwmod_init() has already been called or 0 otherwise.
  */
-int omap_hwmod_init(struct omap_hwmod **ohs)
+int __init omap_hwmod_init(struct omap_hwmod **ohs)
 {
 	struct omap_hwmod *oh;
 	int r;
@@ -1558,8 +1611,8 @@ int omap_hwmod_init(struct omap_hwmod **ohs)
 	oh = *ohs;
 	while (oh) {
 		if (omap_chip_is(oh->omap_chip)) {
-			r = omap_hwmod_register(oh);
-			WARN(r, "omap_hwmod: %s: omap_hwmod_register returned "
+			r = _register(oh);
+			WARN(r, "omap_hwmod: %s: _register returned "
 			     "%d\n", oh->name, r);
 		}
 		oh = *++ohs;
@@ -1570,13 +1623,12 @@ int omap_hwmod_init(struct omap_hwmod **ohs)
 
 /**
  * omap_hwmod_late_init - do some post-clock framework initialization
- * @skip_setup_idle: if 1, do not idle hwmods in _setup()
  *
  * Must be called after omap2_clk_init().  Resolves the struct clk names
  * to struct clk pointers for each registered omap_hwmod.  Also calls
  * _setup() on each hwmod.  Returns 0.
  */
-int omap_hwmod_late_init(u8 skip_setup_idle)
+int omap_hwmod_late_init(void)
 {
 	int r;
 
@@ -1588,36 +1640,7 @@ int omap_hwmod_late_init(u8 skip_setup_idle)
 	WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n",
 	     MPU_INITIATOR_NAME);
 
-	if (skip_setup_idle)
-		pr_debug("omap_hwmod: will leave hwmods enabled during setup\n");
-
-	omap_hwmod_for_each(_setup, &skip_setup_idle);
-
-	return 0;
-}
-
-/**
- * omap_hwmod_unregister - unregister an omap_hwmod
- * @oh: struct omap_hwmod *
- *
- * Unregisters a previously-registered omap_hwmod @oh.  There's probably
- * no use case for this, so it is likely to be removed in a later version.
- *
- * XXX Free all of the bootmem-allocated structures here when that is
- * implemented.  Make it clear that core code is the only code that is
- * expected to unregister modules.
- */
-int omap_hwmod_unregister(struct omap_hwmod *oh)
-{
-	if (!oh)
-		return -EINVAL;
-
-	pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
-
-	mutex_lock(&omap_hwmod_mutex);
-	iounmap(oh->_mpu_rt_va);
-	list_del(&oh->node);
-	mutex_unlock(&omap_hwmod_mutex);
+	omap_hwmod_for_each(_setup, NULL);
 
 	return 0;
 }
@@ -1632,18 +1655,18 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
 int omap_hwmod_enable(struct omap_hwmod *oh)
 {
 	int r;
+	unsigned long flags;
 
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&oh->_mutex);
-	r = _omap_hwmod_enable(oh);
-	mutex_unlock(&oh->_mutex);
+	spin_lock_irqsave(&oh->_lock, flags);
+	r = _enable(oh);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return r;
 }
 
-
 /**
  * omap_hwmod_idle - idle an omap_hwmod
  * @oh: struct omap_hwmod *
@@ -1653,12 +1676,14 @@ int omap_hwmod_enable(struct omap_hwmod *oh)
  */
 int omap_hwmod_idle(struct omap_hwmod *oh)
 {
+	unsigned long flags;
+
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&oh->_mutex);
-	_omap_hwmod_idle(oh);
-	mutex_unlock(&oh->_mutex);
+	spin_lock_irqsave(&oh->_lock, flags);
+	_idle(oh);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;
 }
@@ -1673,12 +1698,14 @@ int omap_hwmod_idle(struct omap_hwmod *oh)
  */
 int omap_hwmod_shutdown(struct omap_hwmod *oh)
 {
+	unsigned long flags;
+
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&oh->_mutex);
+	spin_lock_irqsave(&oh->_lock, flags);
 	_shutdown(oh);
-	mutex_unlock(&oh->_mutex);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;
 }
@@ -1691,9 +1718,11 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh)
  */
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
 {
-	mutex_lock(&oh->_mutex);
+	unsigned long flags;
+
+	spin_lock_irqsave(&oh->_lock, flags);
 	_enable_clocks(oh);
-	mutex_unlock(&oh->_mutex);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;
 }
@@ -1706,9 +1735,11 @@ int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
  */
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
 {
-	mutex_lock(&oh->_mutex);
+	unsigned long flags;
+
+	spin_lock_irqsave(&oh->_lock, flags);
 	_disable_clocks(oh);
-	mutex_unlock(&oh->_mutex);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;
 }
@@ -1752,13 +1783,14 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
 int omap_hwmod_reset(struct omap_hwmod *oh)
 {
 	int r;
+	unsigned long flags;
 
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&oh->_mutex);
+	spin_lock_irqsave(&oh->_lock, flags);
 	r = _reset(oh);
-	mutex_unlock(&oh->_mutex);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return r;
 }
@@ -1955,13 +1987,18 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
  */
 int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
 {
+	unsigned long flags;
+	u32 v;
+
 	if (!oh->class->sysc ||
 	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
-	mutex_lock(&oh->_mutex);
-	_enable_wakeup(oh);
-	mutex_unlock(&oh->_mutex);
+	spin_lock_irqsave(&oh->_lock, flags);
+	v = oh->_sysc_cache;
+	_enable_wakeup(oh, &v);
+	_write_sysconfig(v, oh);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;
 }
@@ -1980,13 +2017,18 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
  */
 int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
 {
+	unsigned long flags;
+	u32 v;
+
 	if (!oh->class->sysc ||
 	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
-	mutex_lock(&oh->_mutex);
-	_disable_wakeup(oh);
-	mutex_unlock(&oh->_mutex);
+	spin_lock_irqsave(&oh->_lock, flags);
+	v = oh->_sysc_cache;
+	_disable_wakeup(oh, &v);
+	_write_sysconfig(v, oh);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;
 }
@@ -2006,13 +2048,14 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
 int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	int ret;
+	unsigned long flags;
 
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&oh->_mutex);
+	spin_lock_irqsave(&oh->_lock, flags);
 	ret = _assert_hardreset(oh, name);
-	mutex_unlock(&oh->_mutex);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return ret;
 }
@@ -2032,13 +2075,14 @@ int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name)
 int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	int ret;
+	unsigned long flags;
 
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&oh->_mutex);
+	spin_lock_irqsave(&oh->_lock, flags);
 	ret = _deassert_hardreset(oh, name);
-	mutex_unlock(&oh->_mutex);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return ret;
 }
@@ -2057,13 +2101,14 @@ int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name)
 int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name)
 {
 	int ret;
+	unsigned long flags;
 
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&oh->_mutex);
+	spin_lock_irqsave(&oh->_lock, flags);
 	ret = _read_hardreset(oh, name);
-	mutex_unlock(&oh->_mutex);
+	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return ret;
 }
@@ -2075,9 +2120,8 @@ int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name)
  * @fn: callback function pointer to call for each hwmod in class @classname
  * @user: arbitrary context data to pass to the callback function
  *
- * For each omap_hwmod of class @classname, call @fn.  Takes
- * omap_hwmod_mutex to prevent the hwmod list from changing during the
- * iteration.  If the callback function returns something other than
+ * For each omap_hwmod of class @classname, call @fn.
+ * If the callback function returns something other than
  * zero, the iterator is terminated, and the callback function's return
  * value is passed back to the caller.  Returns 0 upon success, -EINVAL
  * if @classname or @fn are NULL, or passes back the error code from @fn.
@@ -2096,8 +2140,6 @@ int omap_hwmod_for_each_by_class(const char *classname,
 	pr_debug("omap_hwmod: %s: looking for modules of class %s\n",
 		 __func__, classname);
 
-	mutex_lock(&omap_hwmod_mutex);
-
 	list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
 		if (!strcmp(temp_oh->class->name, classname)) {
 			pr_debug("omap_hwmod: %s: %s: calling callback fn\n",
@@ -2108,8 +2150,6 @@ int omap_hwmod_for_each_by_class(const char *classname,
 		}
 	}
 
-	mutex_unlock(&omap_hwmod_mutex);
-
 	if (ret)
 		pr_debug("omap_hwmod: %s: iterator terminated early: %d\n",
 			 __func__, ret);
@@ -2117,3 +2157,64 @@ int omap_hwmod_for_each_by_class(const char *classname,
 	return ret;
 }
 
+/**
+ * omap_hwmod_set_postsetup_state - set the post-_setup() state for this hwmod
+ * @oh: struct omap_hwmod *
+ * @state: state that _setup() should leave the hwmod in
+ *
+ * Sets the hwmod state that @oh will enter at the end of _setup() (called by
+ * omap_hwmod_late_init()).  Only valid to call between calls to
+ * omap_hwmod_init() and omap_hwmod_late_init().  Returns 0 upon success or
+ * -EINVAL if there is a problem with the arguments or if the hwmod is
+ * in the wrong state.
+ */
+int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state)
+{
+	int ret;
+	unsigned long flags;
+
+	if (!oh)
+		return -EINVAL;
+
+	if (state != _HWMOD_STATE_DISABLED &&
+	    state != _HWMOD_STATE_ENABLED &&
+	    state != _HWMOD_STATE_IDLE)
+		return -EINVAL;
+
+	spin_lock_irqsave(&oh->_lock, flags);
+
+	if (oh->_state != _HWMOD_STATE_REGISTERED) {
+		ret = -EINVAL;
+		goto ohsps_unlock;
+	}
+
+	oh->_postsetup_state = state;
+	ret = 0;
+
+ohsps_unlock:
+	spin_unlock_irqrestore(&oh->_lock, flags);
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_get_context_loss_count - get lost context count
+ * @oh: struct omap_hwmod *
+ *
+ * Query the powerdomain of of @oh to get the context loss
+ * count for this device.
+ *
+ * Returns the context loss count of the powerdomain assocated with @oh
+ * upon success, or zero if no powerdomain exists for @oh.
+ */
+u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
+{
+	struct powerdomain *pwrdm;
+	int ret = 0;
+
+	pwrdm = omap_hwmod_get_pwrdm(oh);
+	if (pwrdm)
+		ret = pwrdm_get_context_loss_count(pwrdm);
+
+	return ret;
+}
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index adf6e3632a2..b85c630b64d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -16,11 +16,14 @@
 #include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/serial.h>
+#include <plat/i2c.h>
+#include <plat/gpio.h>
 
 #include "omap_hwmod_common_data.h"
 
-#include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
+#include "prm-regbits-24xx.h"
+#include "wd_timer.h"
 
 /*
  * OMAP2420 hardware module integration data
@@ -36,6 +39,11 @@ static struct omap_hwmod omap2420_iva_hwmod;
 static struct omap_hwmod omap2420_l3_main_hwmod;
 static struct omap_hwmod omap2420_l4_core_hwmod;
 static struct omap_hwmod omap2420_wd_timer2_hwmod;
+static struct omap_hwmod omap2420_gpio1_hwmod;
+static struct omap_hwmod omap2420_gpio2_hwmod;
+static struct omap_hwmod omap2420_gpio3_hwmod;
+static struct omap_hwmod omap2420_gpio4_hwmod;
+static struct omap_hwmod omap2420_dma_system_hwmod;
 
 /* L3 -> L4_CORE interface */
 static struct omap_hwmod_ocp_if omap2420_l3_main__l4_core = {
@@ -77,6 +85,8 @@ static struct omap_hwmod omap2420_l4_wkup_hwmod;
 static struct omap_hwmod omap2420_uart1_hwmod;
 static struct omap_hwmod omap2420_uart2_hwmod;
 static struct omap_hwmod omap2420_uart3_hwmod;
+static struct omap_hwmod omap2420_i2c1_hwmod;
+static struct omap_hwmod omap2420_i2c2_hwmod;
 
 /* L4_CORE -> L4_WKUP interface */
 static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = {
@@ -139,6 +149,45 @@ static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* I2C IP block address space length (in bytes) */
+#define OMAP2_I2C_AS_LEN		128
+
+/* L4 CORE -> I2C1 interface */
+static struct omap_hwmod_addr_space omap2420_i2c1_addr_space[] = {
+	{
+		.pa_start	= 0x48070000,
+		.pa_end		= 0x48070000 + OMAP2_I2C_AS_LEN - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
+	.master		= &omap2420_l4_core_hwmod,
+	.slave		= &omap2420_i2c1_hwmod,
+	.clk		= "i2c1_ick",
+	.addr		= omap2420_i2c1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_i2c1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> I2C2 interface */
+static struct omap_hwmod_addr_space omap2420_i2c2_addr_space[] = {
+	{
+		.pa_start	= 0x48072000,
+		.pa_end		= 0x48072000 + OMAP2_I2C_AS_LEN - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
+	.master		= &omap2420_l4_core_hwmod,
+	.slave		= &omap2420_i2c2_hwmod,
+	.clk		= "i2c2_ick",
+	.addr		= omap2420_i2c2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_i2c2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap2420_l4_core_slaves[] = {
 	&omap2420_l3_main__l4_core,
@@ -150,6 +199,8 @@ static struct omap_hwmod_ocp_if *omap2420_l4_core_masters[] = {
 	&omap2_l4_core__uart1,
 	&omap2_l4_core__uart2,
 	&omap2_l4_core__uart3,
+	&omap2420_l4_core__i2c1,
+	&omap2420_l4_core__i2c2
 };
 
 /* L4 CORE */
@@ -262,8 +313,9 @@ static struct omap_hwmod_class_sysconfig omap2420_wd_timer_sysc = {
 };
 
 static struct omap_hwmod_class omap2420_wd_timer_hwmod_class = {
-	.name = "wd_timer",
-	.sysc = &omap2420_wd_timer_sysc,
+	.name		= "wd_timer",
+	.sysc		= &omap2420_wd_timer_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable
 };
 
 /* wd_timer2 */
@@ -418,6 +470,400 @@ static struct omap_hwmod omap2420_uart3_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
 };
 
+/* I2C common */
+static struct omap_hwmod_class_sysconfig i2c_sysc = {
+	.rev_offs	= 0x00,
+	.sysc_offs	= 0x20,
+	.syss_offs	= 0x10,
+	.sysc_flags	= SYSC_HAS_SOFTRESET,
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class i2c_class = {
+	.name		= "i2c",
+	.sysc		= &i2c_sysc,
+};
+
+static struct omap_i2c_dev_attr i2c_dev_attr;
+
+/* I2C1 */
+
+static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = {
+	{ .irq = INT_24XX_I2C1_IRQ, },
+};
+
+static struct omap_hwmod_dma_info i2c1_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX },
+	{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_i2c1_slaves[] = {
+	&omap2420_l4_core__i2c1,
+};
+
+static struct omap_hwmod omap2420_i2c1_hwmod = {
+	.name		= "i2c1",
+	.mpu_irqs	= i2c1_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(i2c1_mpu_irqs),
+	.sdma_reqs	= i2c1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(i2c1_sdma_reqs),
+	.main_clk	= "i2c1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP2420_EN_I2C1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT,
+		},
+	},
+	.slaves		= omap2420_i2c1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_i2c1_slaves),
+	.class		= &i2c_class,
+	.dev_attr	= &i2c_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+	.flags		= HWMOD_16BIT_REG,
+};
+
+/* I2C2 */
+
+static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = {
+	{ .irq = INT_24XX_I2C2_IRQ, },
+};
+
+static struct omap_hwmod_dma_info i2c2_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX },
+	{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX },
+};
+
+static struct omap_hwmod_ocp_if *omap2420_i2c2_slaves[] = {
+	&omap2420_l4_core__i2c2,
+};
+
+static struct omap_hwmod omap2420_i2c2_hwmod = {
+	.name		= "i2c2",
+	.mpu_irqs	= i2c2_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(i2c2_mpu_irqs),
+	.sdma_reqs	= i2c2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(i2c2_sdma_reqs),
+	.main_clk	= "i2c2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP2420_EN_I2C2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT,
+		},
+	},
+	.slaves		= omap2420_i2c2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_i2c2_slaves),
+	.class		= &i2c_class,
+	.dev_attr	= &i2c_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+	.flags		= HWMOD_16BIT_REG,
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = {
+	{
+		.pa_start	= 0x48018000,
+		.pa_end		= 0x480181ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio1_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio2 */
+static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = {
+	{
+		.pa_start	= 0x4801a000,
+		.pa_end		= 0x4801a1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio2_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio3 */
+static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = {
+	{
+		.pa_start	= 0x4801c000,
+		.pa_end		= 0x4801c1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio3_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio4 */
+static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = {
+	{
+		.pa_start	= 0x4801e000,
+		.pa_end		= 0x4801e1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
+	.master		= &omap2420_l4_wkup_hwmod,
+	.slave		= &omap2420_gpio4_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2420_gpio4_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2420_gpio4_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio dev_attr */
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width = 32,
+	.dbck_flag = false,
+};
+
+static struct omap_hwmod_class_sysconfig omap242x_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+static struct omap_hwmod_class omap242x_gpio_hwmod_class = {
+	.name = "gpio",
+	.sysc = &omap242x_gpio_sysc,
+	.rev = 0,
+};
+
+/* gpio1 */
+static struct omap_hwmod_irq_info omap242x_gpio1_irqs[] = {
+	{ .irq = 29 }, /* INT_24XX_GPIO_BANK1 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
+	&omap2420_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap2420_gpio1_hwmod = {
+	.name		= "gpio1",
+	.mpu_irqs	= omap242x_gpio1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio1_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio1_slaves),
+	.class		= &omap242x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* gpio2 */
+static struct omap_hwmod_irq_info omap242x_gpio2_irqs[] = {
+	{ .irq = 30 }, /* INT_24XX_GPIO_BANK2 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
+	&omap2420_l4_wkup__gpio2,
+};
+
+static struct omap_hwmod omap2420_gpio2_hwmod = {
+	.name		= "gpio2",
+	.mpu_irqs	= omap242x_gpio2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio2_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio2_slaves),
+	.class		= &omap242x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* gpio3 */
+static struct omap_hwmod_irq_info omap242x_gpio3_irqs[] = {
+	{ .irq = 31 }, /* INT_24XX_GPIO_BANK3 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
+	&omap2420_l4_wkup__gpio3,
+};
+
+static struct omap_hwmod omap2420_gpio3_hwmod = {
+	.name		= "gpio3",
+	.mpu_irqs	= omap242x_gpio3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio3_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio3_slaves),
+	.class		= &omap242x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* gpio4 */
+static struct omap_hwmod_irq_info omap242x_gpio4_irqs[] = {
+	{ .irq = 32 }, /* INT_24XX_GPIO_BANK4 */
+};
+
+static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
+	&omap2420_l4_wkup__gpio4,
+};
+
+static struct omap_hwmod omap2420_gpio4_hwmod = {
+	.name		= "gpio4",
+	.mpu_irqs	= omap242x_gpio4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio4_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2420_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_gpio4_slaves),
+	.class		= &omap242x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+};
+
+/* system dma */
+static struct omap_hwmod_class_sysconfig omap2420_dma_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x002c,
+	.syss_offs	= 0x0028,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2420_dma_hwmod_class = {
+	.name = "dma",
+	.sysc = &omap2420_dma_sysc,
+};
+
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+						IS_CSSA_32 | IS_CDSA_32,
+	.lch_count = 32,
+};
+
+static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = {
+	{ .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
+	{ .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
+	{ .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
+	{ .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
+};
+
+static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = {
+	{
+		.pa_start	= 0x48056000,
+		.pa_end		= 0x4a0560ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* dma_system -> L3 */
+static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = {
+	.master		= &omap2420_dma_system_hwmod,
+	.slave		= &omap2420_l3_main_hwmod,
+	.clk		= "core_l3_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system master ports */
+static struct omap_hwmod_ocp_if *omap2420_dma_system_masters[] = {
+	&omap2420_dma_system__l3,
+};
+
+/* l4_core -> dma_system */
+static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
+	.master		= &omap2420_l4_core_hwmod,
+	.slave		= &omap2420_dma_system_hwmod,
+	.clk		= "sdma_ick",
+	.addr		= omap2420_dma_system_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap2420_dma_system_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system slave ports */
+static struct omap_hwmod_ocp_if *omap2420_dma_system_slaves[] = {
+	&omap2420_l4_core__dma_system,
+};
+
+static struct omap_hwmod omap2420_dma_system_hwmod = {
+	.name		= "dma",
+	.class		= &omap2420_dma_hwmod_class,
+	.mpu_irqs	= omap2420_dma_system_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2420_dma_system_irqs),
+	.main_clk	= "core_l3_ck",
+	.slaves		= omap2420_dma_system_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2420_dma_system_slaves),
+	.masters	= omap2420_dma_system_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2420_dma_system_masters),
+	.dev_attr	= &dma_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2420),
+	.flags		= HWMOD_NO_IDLEST,
+};
+
 static __initdata struct omap_hwmod *omap2420_hwmods[] = {
 	&omap2420_l3_main_hwmod,
 	&omap2420_l4_core_hwmod,
@@ -428,6 +874,17 @@ static __initdata struct omap_hwmod *omap2420_hwmods[] = {
 	&omap2420_uart1_hwmod,
 	&omap2420_uart2_hwmod,
 	&omap2420_uart3_hwmod,
+	&omap2420_i2c1_hwmod,
+	&omap2420_i2c2_hwmod,
+
+	/* gpio class */
+	&omap2420_gpio1_hwmod,
+	&omap2420_gpio2_hwmod,
+	&omap2420_gpio3_hwmod,
+	&omap2420_gpio4_hwmod,
+
+	/* dma_system class*/
+	&omap2420_dma_system_hwmod,
 	NULL,
 };
 
@@ -435,5 +892,3 @@ int __init omap2420_hwmod_init(void)
 {
 	return omap_hwmod_init(omap2420_hwmods);
 }
-
-
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index 12d939e456c..8ecfbcde13b 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -16,11 +16,14 @@
 #include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/serial.h>
+#include <plat/i2c.h>
+#include <plat/gpio.h>
 
 #include "omap_hwmod_common_data.h"
 
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
+#include "wd_timer.h"
 
 /*
  * OMAP2430 hardware module integration data
@@ -36,6 +39,12 @@ static struct omap_hwmod omap2430_iva_hwmod;
 static struct omap_hwmod omap2430_l3_main_hwmod;
 static struct omap_hwmod omap2430_l4_core_hwmod;
 static struct omap_hwmod omap2430_wd_timer2_hwmod;
+static struct omap_hwmod omap2430_gpio1_hwmod;
+static struct omap_hwmod omap2430_gpio2_hwmod;
+static struct omap_hwmod omap2430_gpio3_hwmod;
+static struct omap_hwmod omap2430_gpio4_hwmod;
+static struct omap_hwmod omap2430_gpio5_hwmod;
+static struct omap_hwmod omap2430_dma_system_hwmod;
 
 /* L3 -> L4_CORE interface */
 static struct omap_hwmod_ocp_if omap2430_l3_main__l4_core = {
@@ -77,6 +86,47 @@ static struct omap_hwmod omap2430_l4_wkup_hwmod;
 static struct omap_hwmod omap2430_uart1_hwmod;
 static struct omap_hwmod omap2430_uart2_hwmod;
 static struct omap_hwmod omap2430_uart3_hwmod;
+static struct omap_hwmod omap2430_i2c1_hwmod;
+static struct omap_hwmod omap2430_i2c2_hwmod;
+
+/* I2C IP block address space length (in bytes) */
+#define OMAP2_I2C_AS_LEN		128
+
+/* L4 CORE -> I2C1 interface */
+static struct omap_hwmod_addr_space omap2430_i2c1_addr_space[] = {
+	{
+		.pa_start	= 0x48070000,
+		.pa_end		= 0x48070000 + OMAP2_I2C_AS_LEN - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_i2c1_hwmod,
+	.clk		= "i2c1_ick",
+	.addr		= omap2430_i2c1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_i2c1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> I2C2 interface */
+static struct omap_hwmod_addr_space omap2430_i2c2_addr_space[] = {
+	{
+		.pa_start	= 0x48072000,
+		.pa_end		= 0x48072000 + OMAP2_I2C_AS_LEN - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_i2c2_hwmod,
+	.clk		= "i2c2_ick",
+	.addr		= omap2430_i2c2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_i2c2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
 
 /* L4_CORE -> L4_WKUP interface */
 static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = {
@@ -262,8 +312,9 @@ static struct omap_hwmod_class_sysconfig omap2430_wd_timer_sysc = {
 };
 
 static struct omap_hwmod_class omap2430_wd_timer_hwmod_class = {
-	.name = "wd_timer",
-	.sysc = &omap2430_wd_timer_sysc,
+	.name		= "wd_timer",
+	.sysc		= &omap2430_wd_timer_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable
 };
 
 /* wd_timer2 */
@@ -418,6 +469,456 @@ static struct omap_hwmod omap2430_uart3_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
 };
 
+/* I2C common */
+static struct omap_hwmod_class_sysconfig i2c_sysc = {
+	.rev_offs	= 0x00,
+	.sysc_offs	= 0x20,
+	.syss_offs	= 0x10,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class i2c_class = {
+	.name		= "i2c",
+	.sysc		= &i2c_sysc,
+};
+
+static struct omap_i2c_dev_attr i2c_dev_attr = {
+	.fifo_depth	= 8, /* bytes */
+};
+
+/* I2C1 */
+
+static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = {
+	{ .irq = INT_24XX_I2C1_IRQ, },
+};
+
+static struct omap_hwmod_dma_info i2c1_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX },
+	{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_i2c1_slaves[] = {
+	&omap2430_l4_core__i2c1,
+};
+
+static struct omap_hwmod omap2430_i2c1_hwmod = {
+	.name		= "i2c1",
+	.mpu_irqs	= i2c1_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(i2c1_mpu_irqs),
+	.sdma_reqs	= i2c1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(i2c1_sdma_reqs),
+	.main_clk	= "i2chs1_fck",
+	.prcm		= {
+		.omap2 = {
+			/*
+			 * NOTE: The CM_FCLKEN* and CM_ICLKEN* for
+			 * I2CHS IP's do not follow the usual pattern.
+			 * prcm_reg_id alone cannot be used to program
+			 * the iclk and fclk. Needs to be handled using
+			 * additonal flags when clk handling is moved
+			 * to hwmod framework.
+			 */
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP2430_EN_I2CHS1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP2430_ST_I2CHS1_SHIFT,
+		},
+	},
+	.slaves		= omap2430_i2c1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_i2c1_slaves),
+	.class		= &i2c_class,
+	.dev_attr	= &i2c_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* I2C2 */
+
+static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = {
+	{ .irq = INT_24XX_I2C2_IRQ, },
+};
+
+static struct omap_hwmod_dma_info i2c2_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX },
+	{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX },
+};
+
+static struct omap_hwmod_ocp_if *omap2430_i2c2_slaves[] = {
+	&omap2430_l4_core__i2c2,
+};
+
+static struct omap_hwmod omap2430_i2c2_hwmod = {
+	.name		= "i2c2",
+	.mpu_irqs	= i2c2_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(i2c2_mpu_irqs),
+	.sdma_reqs	= i2c2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(i2c2_sdma_reqs),
+	.main_clk	= "i2chs2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP2430_EN_I2CHS2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP2430_ST_I2CHS2_SHIFT,
+		},
+	},
+	.slaves		= omap2430_i2c2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_i2c2_slaves),
+	.class		= &i2c_class,
+	.dev_attr	= &i2c_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = {
+	{
+		.pa_start	= 0x4900C000,
+		.pa_end		= 0x4900C1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = {
+	.master		= &omap2430_l4_wkup_hwmod,
+	.slave		= &omap2430_gpio1_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_gpio1_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio2 */
+static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = {
+	{
+		.pa_start	= 0x4900E000,
+		.pa_end		= 0x4900E1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = {
+	.master		= &omap2430_l4_wkup_hwmod,
+	.slave		= &omap2430_gpio2_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_gpio2_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio3 */
+static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = {
+	{
+		.pa_start	= 0x49010000,
+		.pa_end		= 0x490101ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = {
+	.master		= &omap2430_l4_wkup_hwmod,
+	.slave		= &omap2430_gpio3_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_gpio3_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> gpio4 */
+static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = {
+	{
+		.pa_start	= 0x49012000,
+		.pa_end		= 0x490121ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = {
+	.master		= &omap2430_l4_wkup_hwmod,
+	.slave		= &omap2430_gpio4_hwmod,
+	.clk		= "gpios_ick",
+	.addr		= omap2430_gpio4_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_gpio4_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_core -> gpio5 */
+static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = {
+	{
+		.pa_start	= 0x480B6000,
+		.pa_end		= 0x480B61ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_gpio5_hwmod,
+	.clk		= "gpio5_ick",
+	.addr		= omap2430_gpio5_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap2430_gpio5_addr_space),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio dev_attr */
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width = 32,
+	.dbck_flag = false,
+};
+
+static struct omap_hwmod_class_sysconfig omap243x_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+static struct omap_hwmod_class omap243x_gpio_hwmod_class = {
+	.name = "gpio",
+	.sysc = &omap243x_gpio_sysc,
+	.rev = 0,
+};
+
+/* gpio1 */
+static struct omap_hwmod_irq_info omap243x_gpio1_irqs[] = {
+	{ .irq = 29 }, /* INT_24XX_GPIO_BANK1 */
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
+	&omap2430_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap2430_gpio1_hwmod = {
+	.name		= "gpio1",
+	.mpu_irqs	= omap243x_gpio1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio1_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_EN_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2430_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio1_slaves),
+	.class		= &omap243x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* gpio2 */
+static struct omap_hwmod_irq_info omap243x_gpio2_irqs[] = {
+	{ .irq = 30 }, /* INT_24XX_GPIO_BANK2 */
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
+	&omap2430_l4_wkup__gpio2,
+};
+
+static struct omap_hwmod omap2430_gpio2_hwmod = {
+	.name		= "gpio2",
+	.mpu_irqs	= omap243x_gpio2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio2_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2430_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio2_slaves),
+	.class		= &omap243x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* gpio3 */
+static struct omap_hwmod_irq_info omap243x_gpio3_irqs[] = {
+	{ .irq = 31 }, /* INT_24XX_GPIO_BANK3 */
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
+	&omap2430_l4_wkup__gpio3,
+};
+
+static struct omap_hwmod omap2430_gpio3_hwmod = {
+	.name		= "gpio3",
+	.mpu_irqs	= omap243x_gpio3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio3_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2430_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio3_slaves),
+	.class		= &omap243x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* gpio4 */
+static struct omap_hwmod_irq_info omap243x_gpio4_irqs[] = {
+	{ .irq = 32 }, /* INT_24XX_GPIO_BANK4 */
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
+	&omap2430_l4_wkup__gpio4,
+};
+
+static struct omap_hwmod omap2430_gpio4_hwmod = {
+	.name		= "gpio4",
+	.mpu_irqs	= omap243x_gpio4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio4_irqs),
+	.main_clk	= "gpios_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP24XX_EN_GPIOS_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP24XX_ST_GPIOS_SHIFT,
+		},
+	},
+	.slaves		= omap2430_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio4_slaves),
+	.class		= &omap243x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* gpio5 */
+static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = {
+	{ .irq = 33 }, /* INT_24XX_GPIO_BANK5 */
+};
+
+static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
+	&omap2430_l4_core__gpio5,
+};
+
+static struct omap_hwmod omap2430_gpio5_hwmod = {
+	.name		= "gpio5",
+	.mpu_irqs	= omap243x_gpio5_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio5_irqs),
+	.main_clk	= "gpio5_fck",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 2,
+			.module_bit = OMAP2430_EN_GPIO5_SHIFT,
+			.module_offs = CORE_MOD,
+			.idlest_reg_id = 2,
+			.idlest_idle_bit = OMAP2430_ST_GPIO5_SHIFT,
+		},
+	},
+	.slaves		= omap2430_gpio5_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_gpio5_slaves),
+	.class		= &omap243x_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+};
+
+/* dma_system */
+static struct omap_hwmod_class_sysconfig omap2430_dma_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x002c,
+	.syss_offs	= 0x0028,
+	.sysc_flags	= (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap2430_dma_hwmod_class = {
+	.name = "dma",
+	.sysc = &omap2430_dma_sysc,
+};
+
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+				IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+	.lch_count = 32,
+};
+
+static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = {
+	{ .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
+	{ .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
+	{ .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
+	{ .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
+};
+
+static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = {
+	{
+		.pa_start	= 0x48056000,
+		.pa_end		= 0x4a0560ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* dma_system -> L3 */
+static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = {
+	.master		= &omap2430_dma_system_hwmod,
+	.slave		= &omap2430_l3_main_hwmod,
+	.clk		= "core_l3_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system master ports */
+static struct omap_hwmod_ocp_if *omap2430_dma_system_masters[] = {
+	&omap2430_dma_system__l3,
+};
+
+/* l4_core -> dma_system */
+static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = {
+	.master		= &omap2430_l4_core_hwmod,
+	.slave		= &omap2430_dma_system_hwmod,
+	.clk		= "sdma_ick",
+	.addr		= omap2430_dma_system_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap2430_dma_system_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system slave ports */
+static struct omap_hwmod_ocp_if *omap2430_dma_system_slaves[] = {
+	&omap2430_l4_core__dma_system,
+};
+
+static struct omap_hwmod omap2430_dma_system_hwmod = {
+	.name		= "dma",
+	.class		= &omap2430_dma_hwmod_class,
+	.mpu_irqs	= omap2430_dma_system_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap2430_dma_system_irqs),
+	.main_clk	= "core_l3_ck",
+	.slaves		= omap2430_dma_system_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap2430_dma_system_slaves),
+	.masters	= omap2430_dma_system_masters,
+	.masters_cnt	= ARRAY_SIZE(omap2430_dma_system_masters),
+	.dev_attr	= &dma_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP2430),
+	.flags		= HWMOD_NO_IDLEST,
+};
+
 static __initdata struct omap_hwmod *omap2430_hwmods[] = {
 	&omap2430_l3_main_hwmod,
 	&omap2430_l4_core_hwmod,
@@ -428,6 +929,18 @@ static __initdata struct omap_hwmod *omap2430_hwmods[] = {
 	&omap2430_uart1_hwmod,
 	&omap2430_uart2_hwmod,
 	&omap2430_uart3_hwmod,
+	&omap2430_i2c1_hwmod,
+	&omap2430_i2c2_hwmod,
+
+	/* gpio class */
+	&omap2430_gpio1_hwmod,
+	&omap2430_gpio2_hwmod,
+	&omap2430_gpio3_hwmod,
+	&omap2430_gpio4_hwmod,
+	&omap2430_gpio5_hwmod,
+
+	/* dma_system class*/
+	&omap2430_dma_system_hwmod,
 	NULL,
 };
 
@@ -435,5 +948,3 @@ int __init omap2430_hwmod_init(void)
 {
 	return omap_hwmod_init(omap2430_hwmods);
 }
-
-
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index cb97ecf0a3f..8d8181334f8 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -18,11 +18,16 @@
 #include <plat/cpu.h>
 #include <plat/dma.h>
 #include <plat/serial.h>
+#include <plat/l4_3xxx.h>
+#include <plat/i2c.h>
+#include <plat/gpio.h>
+#include <plat/smartreflex.h>
 
 #include "omap_hwmod_common_data.h"
 
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
+#include "wd_timer.h"
 
 /*
  * OMAP3xxx hardware module integration data
@@ -39,6 +44,19 @@ static struct omap_hwmod omap3xxx_l3_main_hwmod;
 static struct omap_hwmod omap3xxx_l4_core_hwmod;
 static struct omap_hwmod omap3xxx_l4_per_hwmod;
 static struct omap_hwmod omap3xxx_wd_timer2_hwmod;
+static struct omap_hwmod omap3xxx_i2c1_hwmod;
+static struct omap_hwmod omap3xxx_i2c2_hwmod;
+static struct omap_hwmod omap3xxx_i2c3_hwmod;
+static struct omap_hwmod omap3xxx_gpio1_hwmod;
+static struct omap_hwmod omap3xxx_gpio2_hwmod;
+static struct omap_hwmod omap3xxx_gpio3_hwmod;
+static struct omap_hwmod omap3xxx_gpio4_hwmod;
+static struct omap_hwmod omap3xxx_gpio5_hwmod;
+static struct omap_hwmod omap3xxx_gpio6_hwmod;
+static struct omap_hwmod omap34xx_sr1_hwmod;
+static struct omap_hwmod omap34xx_sr2_hwmod;
+
+static struct omap_hwmod omap3xxx_dma_system_hwmod;
 
 /* L3 -> L4_CORE interface */
 static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
@@ -169,9 +187,125 @@ static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+/* I2C IP block address space length (in bytes) */
+#define OMAP2_I2C_AS_LEN		128
+
+/* L4 CORE -> I2C1 interface */
+static struct omap_hwmod_addr_space omap3xxx_i2c1_addr_space[] = {
+	{
+		.pa_start	= 0x48070000,
+		.pa_end		= 0x48070000 + OMAP2_I2C_AS_LEN - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_i2c1_hwmod,
+	.clk		= "i2c1_ick",
+	.addr		= omap3xxx_i2c1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_i2c1_addr_space),
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C1_REGION,
+			.l4_prot_group = 7,
+			.flags	= OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> I2C2 interface */
+static struct omap_hwmod_addr_space omap3xxx_i2c2_addr_space[] = {
+	{
+		.pa_start	= 0x48072000,
+		.pa_end		= 0x48072000 + OMAP2_I2C_AS_LEN - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_i2c2_hwmod,
+	.clk		= "i2c2_ick",
+	.addr		= omap3xxx_i2c2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_i2c2_addr_space),
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C2_REGION,
+			.l4_prot_group = 7,
+			.flags = OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> I2C3 interface */
+static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = {
+	{
+		.pa_start	= 0x48060000,
+		.pa_end		= 0x48060000 + OMAP2_I2C_AS_LEN - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_i2c3_hwmod,
+	.clk		= "i2c3_ick",
+	.addr		= omap3xxx_i2c3_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_i2c3_addr_space),
+	.fw = {
+		.omap2 = {
+			.l4_fw_region  = OMAP3_L4_CORE_FW_I2C3_REGION,
+			.l4_prot_group = 7,
+			.flags = OMAP_FIREWALL_L4,
+		}
+	},
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR1_BASE,
+		.pa_end		= OMAP34XX_SR1_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__sr1 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_sr1_hwmod,
+	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr1_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3_sr1_addr_space),
+	.user		= OCP_USER_MPU,
+};
+
+/* L4 CORE -> SR1 interface */
+static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = {
+	{
+		.pa_start	= OMAP34XX_SR2_BASE,
+		.pa_end		= OMAP34XX_SR2_BASE + SZ_1K - 1,
+		.flags		= ADDR_TYPE_RT,
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3_l4_core__sr2 = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap34xx_sr2_hwmod,
+	.clk		= "sr_l4_ick",
+	.addr		= omap3_sr2_addr_space,
+	.addr_cnt	= ARRAY_SIZE(omap3_sr2_addr_space),
+	.user		= OCP_USER_MPU,
+};
+
 /* Slave interfaces on the L4_CORE interconnect */
 static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
 	&omap3xxx_l3_main__l4_core,
+	&omap3_l4_core__sr1,
+	&omap3_l4_core__sr2,
 };
 
 /* Master interfaces on the L4_CORE interconnect */
@@ -179,6 +313,9 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = {
 	&omap3xxx_l4_core__l4_wkup,
 	&omap3_l4_core__uart1,
 	&omap3_l4_core__uart2,
+	&omap3_l4_core__i2c1,
+	&omap3_l4_core__i2c2,
+	&omap3_l4_core__i2c3,
 };
 
 /* L4 CORE */
@@ -315,9 +452,22 @@ static struct omap_hwmod_class_sysconfig omap3xxx_wd_timer_sysc = {
 	.sysc_fields    = &omap_hwmod_sysc_type1,
 };
 
+/* I2C common */
+static struct omap_hwmod_class_sysconfig i2c_sysc = {
+	.rev_offs	= 0x00,
+	.sysc_offs	= 0x20,
+	.syss_offs	= 0x10,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = {
-	.name = "wd_timer",
-	.sysc = &omap3xxx_wd_timer_sysc,
+	.name		= "wd_timer",
+	.sysc		= &omap3xxx_wd_timer_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable
 };
 
 /* wd_timer2 */
@@ -509,6 +659,703 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
 };
 
+static struct omap_hwmod_class i2c_class = {
+	.name = "i2c",
+	.sysc = &i2c_sysc,
+};
+
+/* I2C1 */
+
+static struct omap_i2c_dev_attr i2c1_dev_attr = {
+	.fifo_depth	= 8, /* bytes */
+};
+
+static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = {
+	{ .irq = INT_24XX_I2C1_IRQ, },
+};
+
+static struct omap_hwmod_dma_info i2c1_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX },
+	{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
+	&omap3_l4_core__i2c1,
+};
+
+static struct omap_hwmod omap3xxx_i2c1_hwmod = {
+	.name		= "i2c1",
+	.mpu_irqs	= i2c1_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(i2c1_mpu_irqs),
+	.sdma_reqs	= i2c1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(i2c1_sdma_reqs),
+	.main_clk	= "i2c1_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_I2C1_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_I2C1_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_i2c1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_i2c1_slaves),
+	.class		= &i2c_class,
+	.dev_attr	= &i2c1_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* I2C2 */
+
+static struct omap_i2c_dev_attr i2c2_dev_attr = {
+	.fifo_depth	= 8, /* bytes */
+};
+
+static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = {
+	{ .irq = INT_24XX_I2C2_IRQ, },
+};
+
+static struct omap_hwmod_dma_info i2c2_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX },
+	{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
+	&omap3_l4_core__i2c2,
+};
+
+static struct omap_hwmod omap3xxx_i2c2_hwmod = {
+	.name		= "i2c2",
+	.mpu_irqs	= i2c2_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(i2c2_mpu_irqs),
+	.sdma_reqs	= i2c2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(i2c2_sdma_reqs),
+	.main_clk	= "i2c2_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_I2C2_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_I2C2_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_i2c2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_i2c2_slaves),
+	.class		= &i2c_class,
+	.dev_attr	= &i2c2_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* I2C3 */
+
+static struct omap_i2c_dev_attr i2c3_dev_attr = {
+	.fifo_depth	= 64, /* bytes */
+};
+
+static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
+	{ .irq = INT_34XX_I2C3_IRQ, },
+};
+
+static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = OMAP34XX_DMA_I2C3_TX },
+	{ .name = "rx", .dma_req = OMAP34XX_DMA_I2C3_RX },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = {
+	&omap3_l4_core__i2c3,
+};
+
+static struct omap_hwmod omap3xxx_i2c3_hwmod = {
+	.name		= "i2c3",
+	.mpu_irqs	= i2c3_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(i2c3_mpu_irqs),
+	.sdma_reqs	= i2c3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(i2c3_sdma_reqs),
+	.main_clk	= "i2c3_fck",
+	.prcm		= {
+		.omap2 = {
+			.module_offs = CORE_MOD,
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_I2C3_SHIFT,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_I2C3_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_i2c3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_i2c3_slaves),
+	.class		= &i2c_class,
+	.dev_attr	= &i2c3_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = {
+	{
+		.pa_start	= 0x48310000,
+		.pa_end		= 0x483101ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = {
+	.master		= &omap3xxx_l4_wkup_hwmod,
+	.slave		= &omap3xxx_gpio1_hwmod,
+	.addr		= omap3xxx_gpio1_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio1_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio2 */
+static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = {
+	{
+		.pa_start	= 0x49050000,
+		.pa_end		= 0x490501ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio2_hwmod,
+	.addr		= omap3xxx_gpio2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio3 */
+static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = {
+	{
+		.pa_start	= 0x49052000,
+		.pa_end		= 0x490521ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio3_hwmod,
+	.addr		= omap3xxx_gpio3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio3_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio4 */
+static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = {
+	{
+		.pa_start	= 0x49054000,
+		.pa_end		= 0x490541ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio4_hwmod,
+	.addr		= omap3xxx_gpio4_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio4_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio5 */
+static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = {
+	{
+		.pa_start	= 0x49056000,
+		.pa_end		= 0x490561ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio5_hwmod,
+	.addr		= omap3xxx_gpio5_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio5_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per -> gpio6 */
+static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = {
+	{
+		.pa_start	= 0x49058000,
+		.pa_end		= 0x490581ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = {
+	.master		= &omap3xxx_l4_per_hwmod,
+	.slave		= &omap3xxx_gpio6_hwmod,
+	.addr		= omap3xxx_gpio6_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_gpio6_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+
+static struct omap_hwmod_class_sysconfig omap3xxx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields    = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_gpio_hwmod_class = {
+	.name = "gpio",
+	.sysc = &omap3xxx_gpio_sysc,
+	.rev = 1,
+};
+
+/* gpio_dev_attr*/
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width = 32,
+	.dbck_flag = true,
+};
+
+/* gpio1 */
+static struct omap_hwmod_irq_info omap3xxx_gpio1_irqs[] = {
+	{ .irq = 29 }, /* INT_34XX_GPIO_BANK1 */
+};
+
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio1_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
+	&omap3xxx_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod omap3xxx_gpio1_hwmod = {
+	.name		= "gpio1",
+	.mpu_irqs	= omap3xxx_gpio1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio1_irqs),
+	.main_clk	= "gpio1_ick",
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO1_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO1_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio1_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio2 */
+static struct omap_hwmod_irq_info omap3xxx_gpio2_irqs[] = {
+	{ .irq = 30 }, /* INT_34XX_GPIO_BANK2 */
+};
+
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio2_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
+	&omap3xxx_l4_per__gpio2,
+};
+
+static struct omap_hwmod omap3xxx_gpio2_hwmod = {
+	.name		= "gpio2",
+	.mpu_irqs	= omap3xxx_gpio2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio2_irqs),
+	.main_clk	= "gpio2_ick",
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO2_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO2_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio2_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio3 */
+static struct omap_hwmod_irq_info omap3xxx_gpio3_irqs[] = {
+	{ .irq = 31 }, /* INT_34XX_GPIO_BANK3 */
+};
+
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio3_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
+	&omap3xxx_l4_per__gpio3,
+};
+
+static struct omap_hwmod omap3xxx_gpio3_hwmod = {
+	.name		= "gpio3",
+	.mpu_irqs	= omap3xxx_gpio3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio3_irqs),
+	.main_clk	= "gpio3_ick",
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO3_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO3_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio3_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio4 */
+static struct omap_hwmod_irq_info omap3xxx_gpio4_irqs[] = {
+	{ .irq = 32 }, /* INT_34XX_GPIO_BANK4 */
+};
+
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio4_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
+	&omap3xxx_l4_per__gpio4,
+};
+
+static struct omap_hwmod omap3xxx_gpio4_hwmod = {
+	.name		= "gpio4",
+	.mpu_irqs	= omap3xxx_gpio4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio4_irqs),
+	.main_clk	= "gpio4_ick",
+	.opt_clks	= gpio4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO4_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO4_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio4_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio5 */
+static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = {
+	{ .irq = 33 }, /* INT_34XX_GPIO_BANK5 */
+};
+
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio5_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
+	&omap3xxx_l4_per__gpio5,
+};
+
+static struct omap_hwmod omap3xxx_gpio5_hwmod = {
+	.name		= "gpio5",
+	.mpu_irqs	= omap3xxx_gpio5_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio5_irqs),
+	.main_clk	= "gpio5_ick",
+	.opt_clks	= gpio5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO5_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO5_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio5_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio5_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* gpio6 */
+static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = {
+	{ .irq = 34 }, /* INT_34XX_GPIO_BANK6 */
+};
+
+static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio6_dbck", },
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
+	&omap3xxx_l4_per__gpio6,
+};
+
+static struct omap_hwmod omap3xxx_gpio6_hwmod = {
+	.name		= "gpio6",
+	.mpu_irqs	= omap3xxx_gpio6_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio6_irqs),
+	.main_clk	= "gpio6_ick",
+	.opt_clks	= gpio6_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_GPIO6_SHIFT,
+			.module_offs = OMAP3430_PER_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_ST_GPIO6_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_gpio6_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_gpio6_slaves),
+	.class		= &omap3xxx_gpio_hwmod_class,
+	.dev_attr	= &gpio_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+};
+
+/* dma_system -> L3 */
+static struct omap_hwmod_ocp_if omap3xxx_dma_system__l3 = {
+	.master		= &omap3xxx_dma_system_hwmod,
+	.slave		= &omap3xxx_l3_main_hwmod,
+	.clk		= "core_l3_ick",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma attributes */
+static struct omap_dma_dev_attr dma_dev_attr = {
+	.dev_caps  = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+				IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+	.lch_count = 32,
+};
+
+static struct omap_hwmod_class_sysconfig omap3xxx_dma_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x002c,
+	.syss_offs	= 0x0028,
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_EMUFREE | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_dma_hwmod_class = {
+	.name = "dma",
+	.sysc = &omap3xxx_dma_sysc,
+};
+
+/* dma_system */
+static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = {
+	{ .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */
+	{ .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */
+	{ .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */
+	{ .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */
+};
+
+static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
+	{
+		.pa_start	= 0x48056000,
+		.pa_end		= 0x4a0560ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* dma_system master ports */
+static struct omap_hwmod_ocp_if *omap3xxx_dma_system_masters[] = {
+	&omap3xxx_dma_system__l3,
+};
+
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = {
+	.master		= &omap3xxx_l4_core_hwmod,
+	.slave		= &omap3xxx_dma_system_hwmod,
+	.clk		= "core_l4_ick",
+	.addr		= omap3xxx_dma_system_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap3xxx_dma_system_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system slave ports */
+static struct omap_hwmod_ocp_if *omap3xxx_dma_system_slaves[] = {
+	&omap3xxx_l4_core__dma_system,
+};
+
+static struct omap_hwmod omap3xxx_dma_system_hwmod = {
+	.name		= "dma",
+	.class		= &omap3xxx_dma_hwmod_class,
+	.mpu_irqs	= omap3xxx_dma_system_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_dma_system_irqs),
+	.main_clk	= "core_l3_ick",
+	.prcm = {
+		.omap2 = {
+			.module_offs		= CORE_MOD,
+			.prcm_reg_id		= 1,
+			.module_bit		= OMAP3430_ST_SDMA_SHIFT,
+			.idlest_reg_id		= 1,
+			.idlest_idle_bit	= OMAP3430_ST_SDMA_SHIFT,
+		},
+	},
+	.slaves		= omap3xxx_dma_system_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3xxx_dma_system_slaves),
+	.masters	= omap3xxx_dma_system_masters,
+	.masters_cnt	= ARRAY_SIZE(omap3xxx_dma_system_masters),
+	.dev_attr	= &dma_dev_attr,
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+	.flags		= HWMOD_NO_IDLEST,
+};
+
+/* SR common */
+static struct omap_hwmod_sysc_fields omap34xx_sr_sysc_fields = {
+	.clkact_shift	= 20,
+};
+
+static struct omap_hwmod_class_sysconfig omap34xx_sr_sysc = {
+	.sysc_offs	= 0x24,
+	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_NO_CACHE),
+	.clockact	= CLOCKACT_TEST_ICLK,
+	.sysc_fields	= &omap34xx_sr_sysc_fields,
+};
+
+static struct omap_hwmod_class omap34xx_smartreflex_hwmod_class = {
+	.name = "smartreflex",
+	.sysc = &omap34xx_sr_sysc,
+	.rev  = 1,
+};
+
+static struct omap_hwmod_sysc_fields omap36xx_sr_sysc_fields = {
+	.sidle_shift	= 24,
+	.enwkup_shift	= 26
+};
+
+static struct omap_hwmod_class_sysconfig omap36xx_sr_sysc = {
+	.sysc_offs	= 0x38,
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+			SYSC_NO_CACHE),
+	.sysc_fields	= &omap36xx_sr_sysc_fields,
+};
+
+static struct omap_hwmod_class omap36xx_smartreflex_hwmod_class = {
+	.name = "smartreflex",
+	.sysc = &omap36xx_sr_sysc,
+	.rev  = 2,
+};
+
+/* SR1 */
+static struct omap_hwmod_ocp_if *omap3_sr1_slaves[] = {
+	&omap3_l4_core__sr1,
+};
+
+static struct omap_hwmod omap34xx_sr1_hwmod = {
+	.name		= "sr1_hwmod",
+	.class		= &omap34xx_smartreflex_hwmod_class,
+	.main_clk	= "sr1_fck",
+	.vdd_name	= "mpu",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_SR1_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
+		},
+	},
+	.slaves		= omap3_sr1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
+					CHIP_IS_OMAP3430ES3_0 |
+					CHIP_IS_OMAP3430ES3_1),
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+static struct omap_hwmod omap36xx_sr1_hwmod = {
+	.name		= "sr1_hwmod",
+	.class		= &omap36xx_smartreflex_hwmod_class,
+	.main_clk	= "sr1_fck",
+	.vdd_name	= "mpu",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_SR1_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_SR1_SHIFT,
+		},
+	},
+	.slaves		= omap3_sr1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3_sr1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
+};
+
+/* SR2 */
+static struct omap_hwmod_ocp_if *omap3_sr2_slaves[] = {
+	&omap3_l4_core__sr2,
+};
+
+static struct omap_hwmod omap34xx_sr2_hwmod = {
+	.name		= "sr2_hwmod",
+	.class		= &omap34xx_smartreflex_hwmod_class,
+	.main_clk	= "sr2_fck",
+	.vdd_name	= "core",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_SR2_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
+		},
+	},
+	.slaves		= omap3_sr2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3430ES2 |
+					CHIP_IS_OMAP3430ES3_0 |
+					CHIP_IS_OMAP3430ES3_1),
+	.flags		= HWMOD_SET_DEFAULT_CLOCKACT,
+};
+
+static struct omap_hwmod omap36xx_sr2_hwmod = {
+	.name		= "sr2_hwmod",
+	.class		= &omap36xx_smartreflex_hwmod_class,
+	.main_clk	= "sr2_fck",
+	.vdd_name	= "core",
+	.prcm		= {
+		.omap2 = {
+			.prcm_reg_id = 1,
+			.module_bit = OMAP3430_EN_SR2_SHIFT,
+			.module_offs = WKUP_MOD,
+			.idlest_reg_id = 1,
+			.idlest_idle_bit = OMAP3430_EN_SR2_SHIFT,
+		},
+	},
+	.slaves		= omap3_sr2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap3_sr2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
+};
+
 static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_l3_main_hwmod,
 	&omap3xxx_l4_core_hwmod,
@@ -521,6 +1368,25 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
 	&omap3xxx_uart2_hwmod,
 	&omap3xxx_uart3_hwmod,
 	&omap3xxx_uart4_hwmod,
+	&omap3xxx_i2c1_hwmod,
+	&omap3xxx_i2c2_hwmod,
+	&omap3xxx_i2c3_hwmod,
+	&omap34xx_sr1_hwmod,
+	&omap34xx_sr2_hwmod,
+	&omap36xx_sr1_hwmod,
+	&omap36xx_sr2_hwmod,
+
+
+	/* gpio class */
+	&omap3xxx_gpio1_hwmod,
+	&omap3xxx_gpio2_hwmod,
+	&omap3xxx_gpio3_hwmod,
+	&omap3xxx_gpio4_hwmod,
+	&omap3xxx_gpio5_hwmod,
+	&omap3xxx_gpio6_hwmod,
+
+	/* dma_system class*/
+	&omap3xxx_dma_system_hwmod,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 7274db4de48..c2806bd11fb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -22,11 +22,16 @@
 
 #include <plat/omap_hwmod.h>
 #include <plat/cpu.h>
+#include <plat/gpio.h>
+#include <plat/dma.h>
 
 #include "omap_hwmod_common_data.h"
 
-#include "cm.h"
+#include "cm1_44xx.h"
+#include "cm2_44xx.h"
+#include "prm44xx.h"
 #include "prm-regbits-44xx.h"
+#include "wd_timer.h"
 
 /* Base offset for all OMAP4 interrupts external to MPUSS */
 #define OMAP44XX_IRQ_GIC_START	32
@@ -35,8 +40,11 @@
 #define OMAP44XX_DMA_REQ_START  1
 
 /* Backward references (IPs with Bus Master capability) */
+static struct omap_hwmod omap44xx_dma_system_hwmod;
 static struct omap_hwmod omap44xx_dmm_hwmod;
+static struct omap_hwmod omap44xx_dsp_hwmod;
 static struct omap_hwmod omap44xx_emif_fw_hwmod;
+static struct omap_hwmod omap44xx_iva_hwmod;
 static struct omap_hwmod omap44xx_l3_instr_hwmod;
 static struct omap_hwmod omap44xx_l3_main_1_hwmod;
 static struct omap_hwmod omap44xx_l3_main_2_hwmod;
@@ -58,7 +66,7 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod;
  * instance(s): dmm
  */
 static struct omap_hwmod_class omap44xx_dmm_hwmod_class = {
-	.name = "dmm",
+	.name	= "dmm",
 };
 
 /* dmm interface data */
@@ -67,7 +75,15 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = {
 	.master		= &omap44xx_l3_main_1_hwmod,
 	.slave		= &omap44xx_dmm_hwmod,
 	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.user		= OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dmm_addrs[] = {
+	{
+		.pa_start	= 0x4e000000,
+		.pa_end		= 0x4e0007ff,
+		.flags		= ADDR_TYPE_RT
+	},
 };
 
 /* mpu -> dmm */
@@ -75,7 +91,9 @@ static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = {
 	.master		= &omap44xx_mpu_hwmod,
 	.slave		= &omap44xx_dmm_hwmod,
 	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.addr		= omap44xx_dmm_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_dmm_addrs),
+	.user		= OCP_USER_MPU,
 };
 
 /* dmm slave ports */
@@ -103,7 +121,7 @@ static struct omap_hwmod omap44xx_dmm_hwmod = {
  * instance(s): emif_fw
  */
 static struct omap_hwmod_class omap44xx_emif_fw_hwmod_class = {
-	.name = "emif_fw",
+	.name	= "emif_fw",
 };
 
 /* emif_fw interface data */
@@ -115,12 +133,22 @@ static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
+static struct omap_hwmod_addr_space omap44xx_emif_fw_addrs[] = {
+	{
+		.pa_start	= 0x4a20c000,
+		.pa_end		= 0x4a20c0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
 /* l4_cfg -> emif_fw */
 static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = {
 	.master		= &omap44xx_l4_cfg_hwmod,
 	.slave		= &omap44xx_emif_fw_hwmod,
 	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+	.addr		= omap44xx_emif_fw_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_emif_fw_addrs),
+	.user		= OCP_USER_MPU,
 };
 
 /* emif_fw slave ports */
@@ -142,10 +170,18 @@ static struct omap_hwmod omap44xx_emif_fw_hwmod = {
  * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3
  */
 static struct omap_hwmod_class omap44xx_l3_hwmod_class = {
-	.name = "l3",
+	.name	= "l3",
 };
 
 /* l3_instr interface data */
+/* iva -> l3_instr */
+static struct omap_hwmod_ocp_if omap44xx_iva__l3_instr = {
+	.master		= &omap44xx_iva_hwmod,
+	.slave		= &omap44xx_l3_instr_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l3_main_3 -> l3_instr */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
 	.master		= &omap44xx_l3_main_3_hwmod,
@@ -156,6 +192,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = {
 
 /* l3_instr slave ports */
 static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = {
+	&omap44xx_iva__l3_instr,
 	&omap44xx_l3_main_3__l3_instr,
 };
 
@@ -167,6 +204,15 @@ static struct omap_hwmod omap44xx_l3_instr_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
+/* l3_main_1 interface data */
+/* dsp -> l3_main_1 */
+static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = {
+	.master		= &omap44xx_dsp_hwmod,
+	.slave		= &omap44xx_l3_main_1_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l3_main_2 -> l3_main_1 */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = {
 	.master		= &omap44xx_l3_main_2_hwmod,
@@ -193,6 +239,7 @@ static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = {
 
 /* l3_main_1 slave ports */
 static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = {
+	&omap44xx_dsp__l3_main_1,
 	&omap44xx_l3_main_2__l3_main_1,
 	&omap44xx_l4_cfg__l3_main_1,
 	&omap44xx_mpu__l3_main_1,
@@ -207,6 +254,22 @@ static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
 };
 
 /* l3_main_2 interface data */
+/* dma_system -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
+	.master		= &omap44xx_dma_system_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* iva -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_iva__l3_main_2 = {
+	.master		= &omap44xx_iva_hwmod,
+	.slave		= &omap44xx_l3_main_2_hwmod,
+	.clk		= "l3_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l3_main_1 -> l3_main_2 */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = {
 	.master		= &omap44xx_l3_main_1_hwmod,
@@ -225,6 +288,8 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
 
 /* l3_main_2 slave ports */
 static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = {
+	&omap44xx_dma_system__l3_main_2,
+	&omap44xx_iva__l3_main_2,
 	&omap44xx_l3_main_1__l3_main_2,
 	&omap44xx_l4_cfg__l3_main_2,
 };
@@ -282,10 +347,18 @@ static struct omap_hwmod omap44xx_l3_main_3_hwmod = {
  * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup
  */
 static struct omap_hwmod_class omap44xx_l4_hwmod_class = {
-	.name = "l4",
+	.name	= "l4",
 };
 
 /* l4_abe interface data */
+/* dsp -> l4_abe */
+static struct omap_hwmod_ocp_if omap44xx_dsp__l4_abe = {
+	.master		= &omap44xx_dsp_hwmod,
+	.slave		= &omap44xx_l4_abe_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
 /* l3_main_1 -> l4_abe */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_abe = {
 	.master		= &omap44xx_l3_main_1_hwmod,
@@ -304,6 +377,7 @@ static struct omap_hwmod_ocp_if omap44xx_mpu__l4_abe = {
 
 /* l4_abe slave ports */
 static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = {
+	&omap44xx_dsp__l4_abe,
 	&omap44xx_l3_main_1__l4_abe,
 	&omap44xx_mpu__l4_abe,
 };
@@ -387,7 +461,7 @@ static struct omap_hwmod omap44xx_l4_wkup_hwmod = {
  * instance(s): mpu_private
  */
 static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = {
-	.name = "mpu_bus",
+	.name	= "mpu_bus",
 };
 
 /* mpu_private interface data */
@@ -413,12 +487,960 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = {
 };
 
 /*
+ * Modules omap_hwmod structures
+ *
+ * The following IPs are excluded for the moment because:
+ * - They do not need an explicit SW control using omap_hwmod API.
+ * - They still need to be validated with the driver
+ *   properly adapted to omap_hwmod / omap_device
+ *
+ *  aess
+ *  bandgap
+ *  c2c
+ *  c2c_target_fw
+ *  cm_core
+ *  cm_core_aon
+ *  counter_32k
+ *  ctrl_module_core
+ *  ctrl_module_pad_core
+ *  ctrl_module_pad_wkup
+ *  ctrl_module_wkup
+ *  debugss
+ *  dmic
+ *  dss
+ *  dss_dispc
+ *  dss_dsi1
+ *  dss_dsi2
+ *  dss_hdmi
+ *  dss_rfbi
+ *  dss_venc
+ *  efuse_ctrl_cust
+ *  efuse_ctrl_std
+ *  elm
+ *  emif1
+ *  emif2
+ *  fdif
+ *  gpmc
+ *  gpu
+ *  hdq1w
+ *  hsi
+ *  ipu
+ *  iss
+ *  kbd
+ *  mailbox
+ *  mcasp
+ *  mcbsp1
+ *  mcbsp2
+ *  mcbsp3
+ *  mcbsp4
+ *  mcpdm
+ *  mcspi1
+ *  mcspi2
+ *  mcspi3
+ *  mcspi4
+ *  mmc1
+ *  mmc2
+ *  mmc3
+ *  mmc4
+ *  mmc5
+ *  mpu_c0
+ *  mpu_c1
+ *  ocmc_ram
+ *  ocp2scp_usb_phy
+ *  ocp_wp_noc
+ *  prcm
+ *  prcm_mpu
+ *  prm
+ *  scrm
+ *  sl2if
+ *  slimbus1
+ *  slimbus2
+ *  spinlock
+ *  timer1
+ *  timer10
+ *  timer11
+ *  timer2
+ *  timer3
+ *  timer4
+ *  timer5
+ *  timer6
+ *  timer7
+ *  timer8
+ *  timer9
+ *  usb_host_fs
+ *  usb_host_hs
+ *  usb_otg_hs
+ *  usb_phy_cm
+ *  usb_tll_hs
+ *  usim
+ */
+
+/*
+ * 'dma' class
+ * dma controller for data exchange between memory to memory (i.e. internal or
+ * external memory) and gp peripherals to memory or memory to gp peripherals
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_dma_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x002c,
+	.syss_offs	= 0x0028,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_EMUFREE | SYSC_HAS_MIDLEMODE |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_dma_hwmod_class = {
+	.name	= "dma",
+	.sysc	= &omap44xx_dma_sysc,
+};
+
+/* dma dev_attr */
+static struct omap_dma_dev_attr dma_dev_attr = {
+	.dev_caps	= RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
+			  IS_CSSA_32 | IS_CDSA_32 | IS_RW_PRIORITY,
+	.lch_count	= 32,
+};
+
+/* dma_system */
+static struct omap_hwmod_irq_info omap44xx_dma_system_irqs[] = {
+	{ .name = "0", .irq = 12 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "1", .irq = 13 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "2", .irq = 14 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "3", .irq = 15 + OMAP44XX_IRQ_GIC_START },
+};
+
+/* dma_system master ports */
+static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
+	&omap44xx_dma_system__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
+	{
+		.pa_start	= 0x4a056000,
+		.pa_end		= 0x4a0560ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_cfg -> dma_system */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_dma_system_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_dma_system_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_dma_system_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dma_system slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_dma_system_slaves[] = {
+	&omap44xx_l4_cfg__dma_system,
+};
+
+static struct omap_hwmod omap44xx_dma_system_hwmod = {
+	.name		= "dma_system",
+	.class		= &omap44xx_dma_hwmod_class,
+	.mpu_irqs	= omap44xx_dma_system_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_dma_system_irqs),
+	.main_clk	= "l3_div_ck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_SDMA_SDMA_CLKCTRL,
+		},
+	},
+	.dev_attr	= &dma_dev_attr,
+	.slaves		= omap44xx_dma_system_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_dma_system_slaves),
+	.masters	= omap44xx_dma_system_masters,
+	.masters_cnt	= ARRAY_SIZE(omap44xx_dma_system_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'dsp' class
+ * dsp sub-system
+ */
+
+static struct omap_hwmod_class omap44xx_dsp_hwmod_class = {
+	.name	= "dsp",
+};
+
+/* dsp */
+static struct omap_hwmod_irq_info omap44xx_dsp_irqs[] = {
+	{ .irq = 28 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = {
+	{ .name = "mmu_cache", .rst_shift = 1 },
+};
+
+static struct omap_hwmod_rst_info omap44xx_dsp_c0_resets[] = {
+	{ .name = "dsp", .rst_shift = 0 },
+};
+
+/* dsp -> iva */
+static struct omap_hwmod_ocp_if omap44xx_dsp__iva = {
+	.master		= &omap44xx_dsp_hwmod,
+	.slave		= &omap44xx_iva_hwmod,
+	.clk		= "dpll_iva_m5x2_ck",
+};
+
+/* dsp master ports */
+static struct omap_hwmod_ocp_if *omap44xx_dsp_masters[] = {
+	&omap44xx_dsp__l3_main_1,
+	&omap44xx_dsp__l4_abe,
+	&omap44xx_dsp__iva,
+};
+
+/* l4_cfg -> dsp */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dsp = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_dsp_hwmod,
+	.clk		= "l4_div_ck",
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* dsp slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_dsp_slaves[] = {
+	&omap44xx_l4_cfg__dsp,
+};
+
+/* Pseudo hwmod for reset control purpose only */
+static struct omap_hwmod omap44xx_dsp_c0_hwmod = {
+	.name		= "dsp_c0",
+	.class		= &omap44xx_dsp_hwmod_class,
+	.flags		= HWMOD_INIT_NO_RESET,
+	.rst_lines	= omap44xx_dsp_c0_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_dsp_c0_resets),
+	.prcm = {
+		.omap4 = {
+			.rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL,
+		},
+	},
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct omap_hwmod omap44xx_dsp_hwmod = {
+	.name		= "dsp",
+	.class		= &omap44xx_dsp_hwmod_class,
+	.mpu_irqs	= omap44xx_dsp_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_dsp_irqs),
+	.rst_lines	= omap44xx_dsp_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_dsp_resets),
+	.main_clk	= "dsp_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_TESLA_TESLA_CLKCTRL,
+			.rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL,
+		},
+	},
+	.slaves		= omap44xx_dsp_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_dsp_slaves),
+	.masters	= omap44xx_dsp_masters,
+	.masters_cnt	= ARRAY_SIZE(omap44xx_dsp_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'gpio' class
+ * general purpose io module
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_gpio_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0114,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_gpio_hwmod_class = {
+	.name	= "gpio",
+	.sysc	= &omap44xx_gpio_sysc,
+	.rev	= 2,
+};
+
+/* gpio dev_attr */
+static struct omap_gpio_dev_attr gpio_dev_attr = {
+	.bank_width	= 32,
+	.dbck_flag	= true,
+};
+
+/* gpio1 */
+static struct omap_hwmod omap44xx_gpio1_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio1_irqs[] = {
+	{ .irq = 29 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = {
+	{
+		.pa_start	= 0x4a310000,
+		.pa_end		= 0x4a3101ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_wkup -> gpio1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_gpio1_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_gpio1_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio1_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio1 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio1_slaves[] = {
+	&omap44xx_l4_wkup__gpio1,
+};
+
+static struct omap_hwmod_opt_clk gpio1_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio1_dbclk" },
+};
+
+static struct omap_hwmod omap44xx_gpio1_hwmod = {
+	.name		= "gpio1",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.mpu_irqs	= omap44xx_gpio1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio1_irqs),
+	.main_clk	= "gpio1_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio1_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio1_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* gpio2 */
+static struct omap_hwmod omap44xx_gpio2_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio2_irqs[] = {
+	{ .irq = 30 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = {
+	{
+		.pa_start	= 0x48055000,
+		.pa_end		= 0x480551ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> gpio2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_gpio2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio2_slaves[] = {
+	&omap44xx_l4_per__gpio2,
+};
+
+static struct omap_hwmod_opt_clk gpio2_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio2_dbclk" },
+};
+
+static struct omap_hwmod omap44xx_gpio2_hwmod = {
+	.name		= "gpio2",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= omap44xx_gpio2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio2_irqs),
+	.main_clk	= "gpio2_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio2_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio2_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* gpio3 */
+static struct omap_hwmod omap44xx_gpio3_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio3_irqs[] = {
+	{ .irq = 31 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = {
+	{
+		.pa_start	= 0x48057000,
+		.pa_end		= 0x480571ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> gpio3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_gpio3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio3_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio3_slaves[] = {
+	&omap44xx_l4_per__gpio3,
+};
+
+static struct omap_hwmod_opt_clk gpio3_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio3_dbclk" },
+};
+
+static struct omap_hwmod omap44xx_gpio3_hwmod = {
+	.name		= "gpio3",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= omap44xx_gpio3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio3_irqs),
+	.main_clk	= "gpio3_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio3_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio3_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* gpio4 */
+static struct omap_hwmod omap44xx_gpio4_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio4_irqs[] = {
+	{ .irq = 32 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = {
+	{
+		.pa_start	= 0x48059000,
+		.pa_end		= 0x480591ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> gpio4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_gpio4_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio4_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio4 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio4_slaves[] = {
+	&omap44xx_l4_per__gpio4,
+};
+
+static struct omap_hwmod_opt_clk gpio4_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio4_dbclk" },
+};
+
+static struct omap_hwmod omap44xx_gpio4_hwmod = {
+	.name		= "gpio4",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= omap44xx_gpio4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio4_irqs),
+	.main_clk	= "gpio4_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio4_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio4_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio4_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* gpio5 */
+static struct omap_hwmod omap44xx_gpio5_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio5_irqs[] = {
+	{ .irq = 33 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = {
+	{
+		.pa_start	= 0x4805b000,
+		.pa_end		= 0x4805b1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> gpio5 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio5_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_gpio5_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio5_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio5 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio5_slaves[] = {
+	&omap44xx_l4_per__gpio5,
+};
+
+static struct omap_hwmod_opt_clk gpio5_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio5_dbclk" },
+};
+
+static struct omap_hwmod omap44xx_gpio5_hwmod = {
+	.name		= "gpio5",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= omap44xx_gpio5_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio5_irqs),
+	.main_clk	= "gpio5_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio5_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio5_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio5_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio5_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* gpio6 */
+static struct omap_hwmod omap44xx_gpio6_hwmod;
+static struct omap_hwmod_irq_info omap44xx_gpio6_irqs[] = {
+	{ .irq = 34 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = {
+	{
+		.pa_start	= 0x4805d000,
+		.pa_end		= 0x4805d1ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> gpio6 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_gpio6_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_gpio6_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_gpio6_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* gpio6 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_gpio6_slaves[] = {
+	&omap44xx_l4_per__gpio6,
+};
+
+static struct omap_hwmod_opt_clk gpio6_opt_clks[] = {
+	{ .role = "dbclk", .clk = "gpio6_dbclk" },
+};
+
+static struct omap_hwmod omap44xx_gpio6_hwmod = {
+	.name		= "gpio6",
+	.class		= &omap44xx_gpio_hwmod_class,
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
+	.mpu_irqs	= omap44xx_gpio6_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_gpio6_irqs),
+	.main_clk	= "gpio6_ick",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
+		},
+	},
+	.opt_clks	= gpio6_opt_clks,
+	.opt_clks_cnt	= ARRAY_SIZE(gpio6_opt_clks),
+	.dev_attr	= &gpio_dev_attr,
+	.slaves		= omap44xx_gpio6_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_gpio6_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'i2c' class
+ * multimaster high-speed i2c controller
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = {
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0090,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
+			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_i2c_hwmod_class = {
+	.name	= "i2c",
+	.sysc	= &omap44xx_i2c_sysc,
+};
+
+/* i2c1 */
+static struct omap_hwmod omap44xx_i2c1_hwmod;
+static struct omap_hwmod_irq_info omap44xx_i2c1_irqs[] = {
+	{ .irq = 56 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_i2c1_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 26 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 27 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = {
+	{
+		.pa_start	= 0x48070000,
+		.pa_end		= 0x480700ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> i2c1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_i2c1_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_i2c1_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_i2c1_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* i2c1 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_i2c1_slaves[] = {
+	&omap44xx_l4_per__i2c1,
+};
+
+static struct omap_hwmod omap44xx_i2c1_hwmod = {
+	.name		= "i2c1",
+	.class		= &omap44xx_i2c_hwmod_class,
+	.flags		= HWMOD_INIT_NO_RESET,
+	.mpu_irqs	= omap44xx_i2c1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_i2c1_irqs),
+	.sdma_reqs	= omap44xx_i2c1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_i2c1_sdma_reqs),
+	.main_clk	= "i2c1_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_I2C1_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_i2c1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* i2c2 */
+static struct omap_hwmod omap44xx_i2c2_hwmod;
+static struct omap_hwmod_irq_info omap44xx_i2c2_irqs[] = {
+	{ .irq = 57 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_i2c2_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 28 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 29 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = {
+	{
+		.pa_start	= 0x48072000,
+		.pa_end		= 0x480720ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> i2c2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_i2c2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_i2c2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_i2c2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* i2c2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_i2c2_slaves[] = {
+	&omap44xx_l4_per__i2c2,
+};
+
+static struct omap_hwmod omap44xx_i2c2_hwmod = {
+	.name		= "i2c2",
+	.class		= &omap44xx_i2c_hwmod_class,
+	.flags		= HWMOD_INIT_NO_RESET,
+	.mpu_irqs	= omap44xx_i2c2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_i2c2_irqs),
+	.sdma_reqs	= omap44xx_i2c2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_i2c2_sdma_reqs),
+	.main_clk	= "i2c2_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_I2C2_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_i2c2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* i2c3 */
+static struct omap_hwmod omap44xx_i2c3_hwmod;
+static struct omap_hwmod_irq_info omap44xx_i2c3_irqs[] = {
+	{ .irq = 61 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_i2c3_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 24 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 25 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = {
+	{
+		.pa_start	= 0x48060000,
+		.pa_end		= 0x480600ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> i2c3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_i2c3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_i2c3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_i2c3_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* i2c3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_i2c3_slaves[] = {
+	&omap44xx_l4_per__i2c3,
+};
+
+static struct omap_hwmod omap44xx_i2c3_hwmod = {
+	.name		= "i2c3",
+	.class		= &omap44xx_i2c_hwmod_class,
+	.flags		= HWMOD_INIT_NO_RESET,
+	.mpu_irqs	= omap44xx_i2c3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_i2c3_irqs),
+	.sdma_reqs	= omap44xx_i2c3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_i2c3_sdma_reqs),
+	.main_clk	= "i2c3_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_I2C3_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_i2c3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* i2c4 */
+static struct omap_hwmod omap44xx_i2c4_hwmod;
+static struct omap_hwmod_irq_info omap44xx_i2c4_irqs[] = {
+	{ .irq = 62 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_i2c4_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 123 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 124 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = {
+	{
+		.pa_start	= 0x48350000,
+		.pa_end		= 0x483500ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> i2c4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_i2c4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_i2c4_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_i2c4_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* i2c4 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_i2c4_slaves[] = {
+	&omap44xx_l4_per__i2c4,
+};
+
+static struct omap_hwmod omap44xx_i2c4_hwmod = {
+	.name		= "i2c4",
+	.class		= &omap44xx_i2c_hwmod_class,
+	.flags		= HWMOD_INIT_NO_RESET,
+	.mpu_irqs	= omap44xx_i2c4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_i2c4_irqs),
+	.sdma_reqs	= omap44xx_i2c4_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_i2c4_sdma_reqs),
+	.main_clk	= "i2c4_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_I2C4_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_i2c4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_i2c4_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'iva' class
+ * multi-standard video encoder/decoder hardware accelerator
+ */
+
+static struct omap_hwmod_class omap44xx_iva_hwmod_class = {
+	.name	= "iva",
+};
+
+/* iva */
+static struct omap_hwmod_irq_info omap44xx_iva_irqs[] = {
+	{ .name = "sync_1", .irq = 103 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "sync_0", .irq = 104 + OMAP44XX_IRQ_GIC_START },
+	{ .name = "mailbox_0", .irq = 107 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_rst_info omap44xx_iva_resets[] = {
+	{ .name = "logic", .rst_shift = 2 },
+};
+
+static struct omap_hwmod_rst_info omap44xx_iva_seq0_resets[] = {
+	{ .name = "seq0", .rst_shift = 0 },
+};
+
+static struct omap_hwmod_rst_info omap44xx_iva_seq1_resets[] = {
+	{ .name = "seq1", .rst_shift = 1 },
+};
+
+/* iva master ports */
+static struct omap_hwmod_ocp_if *omap44xx_iva_masters[] = {
+	&omap44xx_iva__l3_main_2,
+	&omap44xx_iva__l3_instr,
+};
+
+static struct omap_hwmod_addr_space omap44xx_iva_addrs[] = {
+	{
+		.pa_start	= 0x5a000000,
+		.pa_end		= 0x5a07ffff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l3_main_2 -> iva */
+static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = {
+	.master		= &omap44xx_l3_main_2_hwmod,
+	.slave		= &omap44xx_iva_hwmod,
+	.clk		= "l3_div_ck",
+	.addr		= omap44xx_iva_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_iva_addrs),
+	.user		= OCP_USER_MPU,
+};
+
+/* iva slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_iva_slaves[] = {
+	&omap44xx_dsp__iva,
+	&omap44xx_l3_main_2__iva,
+};
+
+/* Pseudo hwmod for reset control purpose only */
+static struct omap_hwmod omap44xx_iva_seq0_hwmod = {
+	.name		= "iva_seq0",
+	.class		= &omap44xx_iva_hwmod_class,
+	.flags		= HWMOD_INIT_NO_RESET,
+	.rst_lines	= omap44xx_iva_seq0_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_iva_seq0_resets),
+	.prcm = {
+		.omap4 = {
+			.rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL,
+		},
+	},
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* Pseudo hwmod for reset control purpose only */
+static struct omap_hwmod omap44xx_iva_seq1_hwmod = {
+	.name		= "iva_seq1",
+	.class		= &omap44xx_iva_hwmod_class,
+	.flags		= HWMOD_INIT_NO_RESET,
+	.rst_lines	= omap44xx_iva_seq1_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_iva_seq1_resets),
+	.prcm = {
+		.omap4 = {
+			.rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL,
+		},
+	},
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+static struct omap_hwmod omap44xx_iva_hwmod = {
+	.name		= "iva",
+	.class		= &omap44xx_iva_hwmod_class,
+	.mpu_irqs	= omap44xx_iva_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_iva_irqs),
+	.rst_lines	= omap44xx_iva_resets,
+	.rst_lines_cnt	= ARRAY_SIZE(omap44xx_iva_resets),
+	.main_clk	= "iva_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
+			.rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL,
+		},
+	},
+	.slaves		= omap44xx_iva_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_iva_slaves),
+	.masters	= omap44xx_iva_masters,
+	.masters_cnt	= ARRAY_SIZE(omap44xx_iva_masters),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
  * 'mpu' class
  * mpu sub-system
  */
 
 static struct omap_hwmod_class omap44xx_mpu_hwmod_class = {
-	.name = "mpu",
+	.name	= "mpu",
 };
 
 /* mpu */
@@ -453,58 +1475,189 @@ static struct omap_hwmod omap44xx_mpu_hwmod = {
 };
 
 /*
- * 'wd_timer' class
- * 32-bit watchdog upward counter that generates a pulse on the reset pin on
- * overflow condition
+ * 'smartreflex' class
+ * smartreflex module (monitor silicon performance and outputs a measure of
+ * performance error)
  */
 
-static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_EMUFREE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
+/* The IP is not compliant to type1 / type2 scheme */
+static struct omap_hwmod_sysc_fields omap_hwmod_sysc_type_smartreflex = {
+	.sidle_shift	= 24,
+	.enwkup_shift	= 26,
 };
 
-/*
- * 'uart' class
- * universal asynchronous receiver/transmitter (uart)
- */
+static struct omap_hwmod_class_sysconfig omap44xx_smartreflex_sysc = {
+	.sysc_offs	= 0x0038,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type_smartreflex,
+};
 
-static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = {
-	.rev_offs	= 0x0050,
-	.sysc_offs	= 0x0054,
-	.syss_offs	= 0x0058,
-	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
+static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = {
+	.name	= "smartreflex",
+	.sysc	= &omap44xx_smartreflex_sysc,
+	.rev	= 2,
 };
 
-static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
-	.name = "wd_timer",
-	.sysc = &omap44xx_wd_timer_sysc,
+/* smartreflex_core */
+static struct omap_hwmod omap44xx_smartreflex_core_hwmod;
+static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = {
+	{ .irq = 19 + OMAP44XX_IRQ_GIC_START },
 };
 
-/* wd_timer2 */
-static struct omap_hwmod omap44xx_wd_timer2_hwmod;
-static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = {
-	{ .irq = 80 + OMAP44XX_IRQ_GIC_START },
+static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = {
+	{
+		.pa_start	= 0x4a0dd000,
+		.pa_end		= 0x4a0dd03f,
+		.flags		= ADDR_TYPE_RT
+	},
 };
 
-static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = {
+/* l4_cfg -> smartreflex_core */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_smartreflex_core_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_smartreflex_core_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_smartreflex_core_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* smartreflex_core slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_smartreflex_core_slaves[] = {
+	&omap44xx_l4_cfg__smartreflex_core,
+};
+
+static struct omap_hwmod omap44xx_smartreflex_core_hwmod = {
+	.name		= "smartreflex_core",
+	.class		= &omap44xx_smartreflex_hwmod_class,
+	.mpu_irqs	= omap44xx_smartreflex_core_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_smartreflex_core_irqs),
+	.main_clk	= "smartreflex_core_fck",
+	.vdd_name	= "core",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_smartreflex_core_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_core_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* smartreflex_iva */
+static struct omap_hwmod omap44xx_smartreflex_iva_hwmod;
+static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = {
+	{ .irq = 102 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = {
 	{
-		.pa_start	= 0x4a314000,
-		.pa_end		= 0x4a31407f,
+		.pa_start	= 0x4a0db000,
+		.pa_end		= 0x4a0db03f,
 		.flags		= ADDR_TYPE_RT
 	},
 };
 
+/* l4_cfg -> smartreflex_iva */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_smartreflex_iva_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_smartreflex_iva_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_smartreflex_iva_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* smartreflex_iva slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_smartreflex_iva_slaves[] = {
+	&omap44xx_l4_cfg__smartreflex_iva,
+};
+
+static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = {
+	.name		= "smartreflex_iva",
+	.class		= &omap44xx_smartreflex_hwmod_class,
+	.mpu_irqs	= omap44xx_smartreflex_iva_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_smartreflex_iva_irqs),
+	.main_clk	= "smartreflex_iva_fck",
+	.vdd_name	= "iva",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_smartreflex_iva_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_iva_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* smartreflex_mpu */
+static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod;
+static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = {
+	{ .irq = 18 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = {
+	{
+		.pa_start	= 0x4a0d9000,
+		.pa_end		= 0x4a0d903f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_cfg -> smartreflex_mpu */
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = {
+	.master		= &omap44xx_l4_cfg_hwmod,
+	.slave		= &omap44xx_smartreflex_mpu_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_smartreflex_mpu_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_smartreflex_mpu_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* smartreflex_mpu slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_smartreflex_mpu_slaves[] = {
+	&omap44xx_l4_cfg__smartreflex_mpu,
+};
+
+static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = {
+	.name		= "smartreflex_mpu",
+	.class		= &omap44xx_smartreflex_hwmod_class,
+	.mpu_irqs	= omap44xx_smartreflex_mpu_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_smartreflex_mpu_irqs),
+	.main_clk	= "smartreflex_mpu_fck",
+	.vdd_name	= "mpu",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_smartreflex_mpu_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_smartreflex_mpu_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/*
+ * 'uart' class
+ * universal asynchronous receiver/transmitter (uart)
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = {
+	.rev_offs	= 0x0050,
+	.sysc_offs	= 0x0054,
+	.syss_offs	= 0x0058,
+	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_ENAWAKEUP |
+			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			   SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
 static struct omap_hwmod_class omap44xx_uart_hwmod_class = {
-	.name = "uart",
-	.sysc = &omap44xx_uart_sysc,
+	.name	= "uart",
+	.sysc	= &omap44xx_uart_sysc,
 };
 
 /* uart1 */
@@ -578,51 +1731,6 @@ static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = {
 	},
 };
 
-/* l4_wkup -> wd_timer2 */
-static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
-	.master		= &omap44xx_l4_wkup_hwmod,
-	.slave		= &omap44xx_wd_timer2_hwmod,
-	.clk		= "l4_wkup_clk_mux_ck",
-	.addr		= omap44xx_wd_timer2_addrs,
-	.addr_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_addrs),
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* wd_timer2 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = {
-	&omap44xx_l4_wkup__wd_timer2,
-};
-
-static struct omap_hwmod omap44xx_wd_timer2_hwmod = {
-	.name		= "wd_timer2",
-	.class		= &omap44xx_wd_timer_hwmod_class,
-	.mpu_irqs	= omap44xx_wd_timer2_irqs,
-	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_irqs),
-	.main_clk	= "wd_timer2_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL,
-		},
-	},
-	.slaves		= omap44xx_wd_timer2_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
-};
-
-/* wd_timer3 */
-static struct omap_hwmod omap44xx_wd_timer3_hwmod;
-static struct omap_hwmod_irq_info omap44xx_wd_timer3_irqs[] = {
-	{ .irq = 36 + OMAP44XX_IRQ_GIC_START },
-};
-
-static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = {
-	{
-		.pa_start	= 0x40130000,
-		.pa_end		= 0x4013007f,
-		.flags		= ADDR_TYPE_RT
-	},
-};
-
 /* l4_per -> uart2 */
 static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = {
 	.master		= &omap44xx_l4_per_hwmod,
@@ -675,25 +1783,6 @@ static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = {
 	},
 };
 
-/* l4_abe -> wd_timer3 */
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_wd_timer3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_wd_timer3_addrs,
-	.addr_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_addrs),
-	.user		= OCP_USER_MPU,
-};
-
-/* l4_abe -> wd_timer3 (dma) */
-static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = {
-	{
-		.pa_start	= 0x49030000,
-		.pa_end		= 0x4903007f,
-		.flags		= ADDR_TYPE_RT
-	},
-};
-
 /* l4_per -> uart3 */
 static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = {
 	.master		= &omap44xx_l4_per_hwmod,
@@ -747,37 +1836,6 @@ static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = {
 	},
 };
 
-static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
-	.master		= &omap44xx_l4_abe_hwmod,
-	.slave		= &omap44xx_wd_timer3_hwmod,
-	.clk		= "ocp_abe_iclk",
-	.addr		= omap44xx_wd_timer3_dma_addrs,
-	.addr_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_dma_addrs),
-	.user		= OCP_USER_SDMA,
-};
-
-/* wd_timer3 slave ports */
-static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = {
-	&omap44xx_l4_abe__wd_timer3,
-	&omap44xx_l4_abe__wd_timer3_dma,
-};
-
-static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
-	.name		= "wd_timer3",
-	.class		= &omap44xx_wd_timer_hwmod_class,
-	.mpu_irqs	= omap44xx_wd_timer3_irqs,
-	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_irqs),
-	.main_clk	= "wd_timer3_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL,
-		},
-	},
-	.slaves		= omap44xx_wd_timer3_slaves,
-	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_slaves),
-	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
-};
-
 /* l4_per -> uart4 */
 static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = {
 	.master		= &omap44xx_l4_per_hwmod,
@@ -811,35 +1869,205 @@ static struct omap_hwmod omap44xx_uart4_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };
 
+/*
+ * 'wd_timer' class
+ * 32-bit watchdog upward counter that generates a pulse on the reset pin on
+ * overflow condition
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_wd_timer_sysc = {
+	.rev_offs	= 0x0000,
+	.sysc_offs	= 0x0010,
+	.syss_offs	= 0x0014,
+	.sysc_flags	= (SYSC_HAS_EMUFREE | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+			   SIDLE_SMART_WKUP),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = {
+	.name		= "wd_timer",
+	.sysc		= &omap44xx_wd_timer_sysc,
+	.pre_shutdown	= &omap2_wd_timer_disable,
+};
+
+/* wd_timer2 */
+static struct omap_hwmod omap44xx_wd_timer2_hwmod;
+static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = {
+	{ .irq = 80 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = {
+	{
+		.pa_start	= 0x4a314000,
+		.pa_end		= 0x4a31407f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_wkup -> wd_timer2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = {
+	.master		= &omap44xx_l4_wkup_hwmod,
+	.slave		= &omap44xx_wd_timer2_hwmod,
+	.clk		= "l4_wkup_clk_mux_ck",
+	.addr		= omap44xx_wd_timer2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* wd_timer2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = {
+	&omap44xx_l4_wkup__wd_timer2,
+};
+
+static struct omap_hwmod omap44xx_wd_timer2_hwmod = {
+	.name		= "wd_timer2",
+	.class		= &omap44xx_wd_timer_hwmod_class,
+	.mpu_irqs	= omap44xx_wd_timer2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_irqs),
+	.main_clk	= "wd_timer2_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_wd_timer2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* wd_timer3 */
+static struct omap_hwmod omap44xx_wd_timer3_hwmod;
+static struct omap_hwmod_irq_info omap44xx_wd_timer3_irqs[] = {
+	{ .irq = 36 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = {
+	{
+		.pa_start	= 0x40130000,
+		.pa_end		= 0x4013007f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_abe -> wd_timer3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_wd_timer3_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_wd_timer3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_addrs),
+	.user		= OCP_USER_MPU,
+};
+
+static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = {
+	{
+		.pa_start	= 0x49030000,
+		.pa_end		= 0x4903007f,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_abe -> wd_timer3 (dma) */
+static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = {
+	.master		= &omap44xx_l4_abe_hwmod,
+	.slave		= &omap44xx_wd_timer3_hwmod,
+	.clk		= "ocp_abe_iclk",
+	.addr		= omap44xx_wd_timer3_dma_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_dma_addrs),
+	.user		= OCP_USER_SDMA,
+};
+
+/* wd_timer3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = {
+	&omap44xx_l4_abe__wd_timer3,
+	&omap44xx_l4_abe__wd_timer3_dma,
+};
+
+static struct omap_hwmod omap44xx_wd_timer3_hwmod = {
+	.name		= "wd_timer3",
+	.class		= &omap44xx_wd_timer_hwmod_class,
+	.mpu_irqs	= omap44xx_wd_timer3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_irqs),
+	.main_clk	= "wd_timer3_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_wd_timer3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_wd_timer3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
 static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
+
 	/* dmm class */
 	&omap44xx_dmm_hwmod,
+
 	/* emif_fw class */
 	&omap44xx_emif_fw_hwmod,
+
 	/* l3 class */
 	&omap44xx_l3_instr_hwmod,
 	&omap44xx_l3_main_1_hwmod,
 	&omap44xx_l3_main_2_hwmod,
 	&omap44xx_l3_main_3_hwmod,
+
 	/* l4 class */
 	&omap44xx_l4_abe_hwmod,
 	&omap44xx_l4_cfg_hwmod,
 	&omap44xx_l4_per_hwmod,
 	&omap44xx_l4_wkup_hwmod,
+
 	/* mpu_bus class */
 	&omap44xx_mpu_private_hwmod,
 
+	/* dma class */
+	&omap44xx_dma_system_hwmod,
+
+	/* dsp class */
+	&omap44xx_dsp_hwmod,
+	&omap44xx_dsp_c0_hwmod,
+
+	/* gpio class */
+	&omap44xx_gpio1_hwmod,
+	&omap44xx_gpio2_hwmod,
+	&omap44xx_gpio3_hwmod,
+	&omap44xx_gpio4_hwmod,
+	&omap44xx_gpio5_hwmod,
+	&omap44xx_gpio6_hwmod,
+
+	/* i2c class */
+	&omap44xx_i2c1_hwmod,
+	&omap44xx_i2c2_hwmod,
+	&omap44xx_i2c3_hwmod,
+	&omap44xx_i2c4_hwmod,
+
+	/* iva class */
+	&omap44xx_iva_hwmod,
+	&omap44xx_iva_seq0_hwmod,
+	&omap44xx_iva_seq1_hwmod,
+
 	/* mpu class */
 	&omap44xx_mpu_hwmod,
-	/* wd_timer class */
-	&omap44xx_wd_timer2_hwmod,
-	&omap44xx_wd_timer3_hwmod,
+
+	/* smartreflex class */
+	&omap44xx_smartreflex_core_hwmod,
+	&omap44xx_smartreflex_iva_hwmod,
+	&omap44xx_smartreflex_mpu_hwmod,
 
 	/* uart class */
 	&omap44xx_uart1_hwmod,
 	&omap44xx_uart2_hwmod,
 	&omap44xx_uart3_hwmod,
 	&omap44xx_uart4_hwmod,
+
+	/* wd_timer class */
+	&omap44xx_wd_timer2_hwmod,
+	&omap44xx_wd_timer3_hwmod,
+
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
new file mode 100644
index 00000000000..46ac27dd6c8
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -0,0 +1,72 @@
+/*
+ * OMAP SoC specific OPP Data helpers
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
+ *	Nishanth Menon
+ *	Kevin Hilman
+ * Copyright (C) 2010 Nokia Corporation.
+ *      Eduardo Valentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H
+
+#include <plat/omap_hwmod.h>
+
+/*
+ * *BIG FAT WARNING*:
+ * USE the following ONLY in opp data initialization common to an SoC.
+ * DO NOT USE these in board files/pm core etc.
+ */
+
+/**
+ * struct omap_opp_def - OMAP OPP Definition
+ * @hwmod_name:	Name of the hwmod for this domain
+ * @freq:	Frequency in hertz corresponding to this OPP
+ * @u_volt:	Nominal voltage in microvolts corresponding to this OPP
+ * @default_available:	True/false - is this OPP available by default
+ *
+ * OMAP SOCs have a standard set of tuples consisting of frequency and voltage
+ * pairs that the device will support per voltage domain. This is called
+ * Operating Points or OPP. The actual definitions of OMAP Operating Points
+ * varies over silicon within the same family of devices. For a specific
+ * domain, you can have a set of {frequency, voltage} pairs and this is denoted
+ * by an array of omap_opp_def. As the kernel boots and more information is
+ * available, a set of these are activated based on the precise nature of
+ * device the kernel boots up on. It is interesting to remember that each IP
+ * which belongs to a voltage domain may define their own set of OPPs on top
+ * of this - but this is handled by the appropriate driver.
+ */
+struct omap_opp_def {
+	char *hwmod_name;
+
+	unsigned long freq;
+	unsigned long u_volt;
+
+	bool default_available;
+};
+
+/*
+ * Initialization wrapper used to define an OPP for OMAP variants.
+ */
+#define OPP_INITIALIZER(_hwmod_name, _enabled, _freq, _uv)	\
+{								\
+	.hwmod_name	= _hwmod_name,				\
+	.default_available	= _enabled,			\
+	.freq		= _freq,				\
+	.u_volt		= _uv,					\
+}
+
+/* Use this to initialize the default table */
+extern int __init omap_init_opp_table(struct omap_opp_def *opp_def,
+		u32 opp_def_size);
+
+#endif		/* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
new file mode 100644
index 00000000000..745252c60e3
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -0,0 +1,149 @@
+/*
+  * This file configures the internal USB PHY in OMAP4430. Used
+  * with TWL6030 transceiver and MUSB on OMAP4430.
+  *
+  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+  * This program is free software; you can redistribute it and/or modify
+  * it under the terms of the GNU General Public License as published by
+  * the Free Software Foundation; either version 2 of the License, or
+  * (at your option) any later version.
+  *
+  * Author: Hema HK <hemahk@ti.com>
+  *
+  * This program is distributed in the hope that it will be useful,
+  * but WITHOUT ANY WARRANTY; without even the implied warranty of
+  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  * GNU General Public License for more details.
+  *
+  * You should have received a copy of the GNU General Public License
+  * along with this program; if not, write to the Free Software
+  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+  *
+  */
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/usb.h>
+
+#include <plat/usb.h>
+
+/* OMAP control module register for UTMI PHY */
+#define CONTROL_DEV_CONF		0x300
+#define PHY_PD				0x1
+
+#define USBOTGHS_CONTROL		0x33c
+#define	AVALID				BIT(0)
+#define	BVALID				BIT(1)
+#define	VBUSVALID			BIT(2)
+#define	SESSEND				BIT(3)
+#define	IDDIG				BIT(4)
+
+static struct clk *phyclk, *clk48m, *clk32k;
+static void __iomem *ctrl_base;
+
+int omap4430_phy_init(struct device *dev)
+{
+	ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
+	if (!ctrl_base) {
+		dev_err(dev, "control module ioremap failed\n");
+		return -ENOMEM;
+	}
+	/* Power down the phy */
+	__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+	phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
+
+	if (IS_ERR(phyclk)) {
+		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
+		iounmap(ctrl_base);
+		return PTR_ERR(phyclk);
+	}
+
+	clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
+	if (IS_ERR(clk48m)) {
+		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
+		clk_put(phyclk);
+		iounmap(ctrl_base);
+		return PTR_ERR(clk48m);
+	}
+
+	clk32k = clk_get(dev, "usb_phy_cm_clk32k");
+	if (IS_ERR(clk32k)) {
+		dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
+		clk_put(phyclk);
+		clk_put(clk48m);
+		iounmap(ctrl_base);
+		return PTR_ERR(clk32k);
+	}
+	return 0;
+}
+
+int omap4430_phy_set_clk(struct device *dev, int on)
+{
+	static int state;
+
+	if (on && !state) {
+		/* Enable the phy clocks */
+		clk_enable(phyclk);
+		clk_enable(clk48m);
+		clk_enable(clk32k);
+		state = 1;
+	} else if (state) {
+		/* Disable the phy clocks */
+		clk_disable(phyclk);
+		clk_disable(clk48m);
+		clk_disable(clk32k);
+		state = 0;
+	}
+	return 0;
+}
+
+int omap4430_phy_power(struct device *dev, int ID, int on)
+{
+	if (on) {
+		/* enabled the clocks */
+		omap4430_phy_set_clk(dev, 1);
+		/* power on the phy */
+		if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
+			__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+			mdelay(200);
+		}
+		if (ID)
+			/* enable VBUS valid, IDDIG groung */
+			__raw_writel(AVALID | VBUSVALID, ctrl_base +
+							USBOTGHS_CONTROL);
+		else
+			/*
+			 * Enable VBUS Valid, AValid and IDDIG
+			 * high impedence
+			 */
+			__raw_writel(IDDIG | AVALID | VBUSVALID,
+						ctrl_base + USBOTGHS_CONTROL);
+	} else {
+		/* Enable session END and IDIG to high impedence. */
+		__raw_writel(SESSEND | IDDIG, ctrl_base +
+					USBOTGHS_CONTROL);
+		/* Disable the clocks */
+		omap4430_phy_set_clk(dev, 0);
+		/* Power down the phy */
+		__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+	}
+
+	return 0;
+}
+
+int omap4430_phy_exit(struct device *dev)
+{
+	if (ctrl_base)
+		iounmap(ctrl_base);
+	if (phyclk)
+		clk_put(phyclk);
+	if (clk48m)
+		clk_put(clk48m);
+	if (clk32k)
+		clk_put(clk32k);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
new file mode 100644
index 00000000000..15f8c6c1bb0
--- /dev/null
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -0,0 +1,277 @@
+/**
+ * OMAP and TWL PMIC specific intializations.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated.
+ * Thara Gopinath
+ * Copyright (C) 2009 Texas Instruments Incorporated.
+ * Nishanth Menon
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/i2c/twl.h>
+
+#include <plat/voltage.h>
+
+#define OMAP3_SRI2C_SLAVE_ADDR		0x12
+#define OMAP3_VDD_MPU_SR_CONTROL_REG	0x00
+#define OMAP3_VDD_CORE_SR_CONTROL_REG	0x01
+#define OMAP3_VP_CONFIG_ERROROFFSET	0x00
+#define OMAP3_VP_VSTEPMIN_VSTEPMIN	0x1
+#define OMAP3_VP_VSTEPMAX_VSTEPMAX	0x04
+#define OMAP3_VP_VLIMITTO_TIMEOUT_US	200
+
+#define OMAP3430_VP1_VLIMITTO_VDDMIN	0x14
+#define OMAP3430_VP1_VLIMITTO_VDDMAX	0x42
+#define OMAP3430_VP2_VLIMITTO_VDDMIN	0x18
+#define OMAP3430_VP2_VLIMITTO_VDDMAX	0x2c
+
+#define OMAP3630_VP1_VLIMITTO_VDDMIN	0x18
+#define OMAP3630_VP1_VLIMITTO_VDDMAX	0x3c
+#define OMAP3630_VP2_VLIMITTO_VDDMIN	0x18
+#define OMAP3630_VP2_VLIMITTO_VDDMAX	0x30
+
+#define OMAP4_SRI2C_SLAVE_ADDR		0x12
+#define OMAP4_VDD_MPU_SR_VOLT_REG	0x55
+#define OMAP4_VDD_IVA_SR_VOLT_REG	0x5B
+#define OMAP4_VDD_CORE_SR_VOLT_REG	0x61
+
+#define OMAP4_VP_CONFIG_ERROROFFSET	0x00
+#define OMAP4_VP_VSTEPMIN_VSTEPMIN	0x01
+#define OMAP4_VP_VSTEPMAX_VSTEPMAX	0x04
+#define OMAP4_VP_VLIMITTO_TIMEOUT_US	200
+
+#define OMAP4_VP_MPU_VLIMITTO_VDDMIN	0xA
+#define OMAP4_VP_MPU_VLIMITTO_VDDMAX	0x39
+#define OMAP4_VP_IVA_VLIMITTO_VDDMIN	0xA
+#define OMAP4_VP_IVA_VLIMITTO_VDDMAX	0x2D
+#define OMAP4_VP_CORE_VLIMITTO_VDDMIN	0xA
+#define OMAP4_VP_CORE_VLIMITTO_VDDMAX	0x28
+
+static bool is_offset_valid;
+static u8 smps_offset;
+
+#define REG_SMPS_OFFSET         0xE0
+
+unsigned long twl4030_vsel_to_uv(const u8 vsel)
+{
+	return (((vsel * 125) + 6000)) * 100;
+}
+
+u8 twl4030_uv_to_vsel(unsigned long uv)
+{
+	return DIV_ROUND_UP(uv - 600000, 12500);
+}
+
+unsigned long twl6030_vsel_to_uv(const u8 vsel)
+{
+	/*
+	 * In TWL6030 depending on the value of SMPS_OFFSET
+	 * efuse register the voltage range supported in
+	 * standard mode can be either between 0.6V - 1.3V or
+	 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
+	 * is programmed to all 0's where as starting from
+	 * TWL6030 ES1.1 the efuse is programmed to 1
+	 */
+	if (!is_offset_valid) {
+		twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
+				REG_SMPS_OFFSET);
+		is_offset_valid = true;
+	}
+
+	/*
+	 * There is no specific formula for voltage to vsel
+	 * conversion above 1.3V. There are special hardcoded
+	 * values for voltages above 1.3V. Currently we are
+	 * hardcoding only for 1.35 V which is used for 1GH OPP for
+	 * OMAP4430.
+	 */
+	if (vsel == 0x3A)
+		return 1350000;
+
+	if (smps_offset & 0x8)
+		return ((((vsel - 1) * 125) + 7000)) * 100;
+	else
+		return ((((vsel - 1) * 125) + 6000)) * 100;
+}
+
+u8 twl6030_uv_to_vsel(unsigned long uv)
+{
+	/*
+	 * In TWL6030 depending on the value of SMPS_OFFSET
+	 * efuse register the voltage range supported in
+	 * standard mode can be either between 0.6V - 1.3V or
+	 * 0.7V - 1.4V. In TWL6030 ES1.0 SMPS_OFFSET efuse
+	 * is programmed to all 0's where as starting from
+	 * TWL6030 ES1.1 the efuse is programmed to 1
+	 */
+	if (!is_offset_valid) {
+		twl_i2c_read_u8(TWL6030_MODULE_ID0, &smps_offset,
+				REG_SMPS_OFFSET);
+		is_offset_valid = true;
+	}
+
+	/*
+	 * There is no specific formula for voltage to vsel
+	 * conversion above 1.3V. There are special hardcoded
+	 * values for voltages above 1.3V. Currently we are
+	 * hardcoding only for 1.35 V which is used for 1GH OPP for
+	 * OMAP4430.
+	 */
+	if (uv == 1350000)
+		return 0x3A;
+
+	if (smps_offset & 0x8)
+		return DIV_ROUND_UP(uv - 700000, 12500) + 1;
+	else
+		return DIV_ROUND_UP(uv - 600000, 12500) + 1;
+}
+
+static struct omap_volt_pmic_info omap3_mpu_volt_info = {
+	.slew_rate		= 4000,
+	.step_size		= 12500,
+	.on_volt		= 1200000,
+	.onlp_volt		= 1000000,
+	.ret_volt		= 975000,
+	.off_volt		= 600000,
+	.volt_setup_time	= 0xfff,
+	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
+	.vp_vddmin		= OMAP3430_VP1_VLIMITTO_VDDMIN,
+	.vp_vddmax		= OMAP3430_VP1_VLIMITTO_VDDMAX,
+	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
+	.pmic_reg		= OMAP3_VDD_MPU_SR_CONTROL_REG,
+	.vsel_to_uv		= twl4030_vsel_to_uv,
+	.uv_to_vsel		= twl4030_uv_to_vsel,
+};
+
+static struct omap_volt_pmic_info omap3_core_volt_info = {
+	.slew_rate		= 4000,
+	.step_size		= 12500,
+	.on_volt                = 1200000,
+	.onlp_volt              = 1000000,
+	.ret_volt               = 975000,
+	.off_volt               = 600000,
+	.volt_setup_time        = 0xfff,
+	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
+	.vp_vddmin		= OMAP3430_VP2_VLIMITTO_VDDMIN,
+	.vp_vddmax		= OMAP3430_VP2_VLIMITTO_VDDMAX,
+	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
+	.pmic_reg		= OMAP3_VDD_CORE_SR_CONTROL_REG,
+	.vsel_to_uv		= twl4030_vsel_to_uv,
+	.uv_to_vsel		= twl4030_uv_to_vsel,
+};
+
+static struct omap_volt_pmic_info omap4_mpu_volt_info = {
+	.slew_rate		= 4000,
+	.step_size		= 12500,
+	.on_volt		= 1350000,
+	.onlp_volt		= 1350000,
+	.ret_volt		= 837500,
+	.off_volt		= 600000,
+	.volt_setup_time	= 0,
+	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vp_vddmin		= OMAP4_VP_MPU_VLIMITTO_VDDMIN,
+	.vp_vddmax		= OMAP4_VP_MPU_VLIMITTO_VDDMAX,
+	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
+	.pmic_reg		= OMAP4_VDD_MPU_SR_VOLT_REG,
+	.vsel_to_uv		= twl6030_vsel_to_uv,
+	.uv_to_vsel		= twl6030_uv_to_vsel,
+};
+
+static struct omap_volt_pmic_info omap4_iva_volt_info = {
+	.slew_rate		= 4000,
+	.step_size		= 12500,
+	.on_volt		= 1100000,
+	.onlp_volt		= 1100000,
+	.ret_volt		= 837500,
+	.off_volt		= 600000,
+	.volt_setup_time	= 0,
+	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vp_vddmin		= OMAP4_VP_IVA_VLIMITTO_VDDMIN,
+	.vp_vddmax		= OMAP4_VP_IVA_VLIMITTO_VDDMAX,
+	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
+	.pmic_reg		= OMAP4_VDD_IVA_SR_VOLT_REG,
+	.vsel_to_uv		= twl6030_vsel_to_uv,
+	.uv_to_vsel		= twl6030_uv_to_vsel,
+};
+
+static struct omap_volt_pmic_info omap4_core_volt_info = {
+	.slew_rate		= 4000,
+	.step_size		= 12500,
+	.on_volt		= 1100000,
+	.onlp_volt		= 1100000,
+	.ret_volt		= 837500,
+	.off_volt		= 600000,
+	.volt_setup_time	= 0,
+	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
+	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
+	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
+	.vp_vddmin		= OMAP4_VP_CORE_VLIMITTO_VDDMIN,
+	.vp_vddmax		= OMAP4_VP_CORE_VLIMITTO_VDDMAX,
+	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
+	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
+	.pmic_reg		= OMAP4_VDD_CORE_SR_VOLT_REG,
+	.vsel_to_uv		= twl6030_vsel_to_uv,
+	.uv_to_vsel		= twl6030_uv_to_vsel,
+};
+
+int __init omap4_twl_init(void)
+{
+	struct voltagedomain *voltdm;
+
+	if (!cpu_is_omap44xx())
+		return -ENODEV;
+
+	voltdm = omap_voltage_domain_lookup("mpu");
+	omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info);
+
+	voltdm = omap_voltage_domain_lookup("iva");
+	omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info);
+
+	voltdm = omap_voltage_domain_lookup("core");
+	omap_voltage_register_pmic(voltdm, &omap4_core_volt_info);
+
+	return 0;
+}
+
+int __init omap3_twl_init(void)
+{
+	struct voltagedomain *voltdm;
+
+	if (!cpu_is_omap34xx())
+		return -ENODEV;
+
+	if (cpu_is_omap3630()) {
+		omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
+		omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
+		omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
+		omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
+	}
+
+	voltdm = omap_voltage_domain_lookup("mpu");
+	omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info);
+
+	voltdm = omap_voltage_domain_lookup("core");
+	omap_voltage_register_pmic(voltdm, &omap3_core_volt_info);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c
new file mode 100644
index 00000000000..ab8b35b780b
--- /dev/null
+++ b/arch/arm/mach-omap2/opp.c
@@ -0,0 +1,93 @@
+/*
+ * OMAP SoC specific OPP wrapper function
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
+ *	Nishanth Menon
+ *	Kevin Hilman
+ * Copyright (C) 2010 Nokia Corporation.
+ *      Eduardo Valentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+#include <linux/opp.h>
+
+#include <plat/omap_device.h>
+
+#include "omap_opp_data.h"
+
+/* Temp variable to allow multiple calls */
+static u8 __initdata omap_table_init;
+
+/**
+ * omap_init_opp_table() - Initialize opp table as per the CPU type
+ * @opp_def:		opp default list for this silicon
+ * @opp_def_size:	number of opp entries for this silicon
+ *
+ * Register the initial OPP table with the OPP library based on the CPU
+ * type. This is meant to be used only by SoC specific registration.
+ */
+int __init omap_init_opp_table(struct omap_opp_def *opp_def,
+		u32 opp_def_size)
+{
+	int i, r;
+
+	if (!opp_def || !opp_def_size) {
+		pr_err("%s: invalid params!\n", __func__);
+		return -EINVAL;
+	}
+
+	/*
+	 * Initialize only if not already initialized even if the previous
+	 * call failed, because, no reason we'd succeed again.
+	 */
+	if (omap_table_init)
+		return -EEXIST;
+	omap_table_init = 1;
+
+	/* Lets now register with OPP library */
+	for (i = 0; i < opp_def_size; i++) {
+		struct omap_hwmod *oh;
+		struct device *dev;
+
+		if (!opp_def->hwmod_name) {
+			pr_err("%s: NULL name of omap_hwmod, failing [%d].\n",
+				__func__, i);
+			return -EINVAL;
+		}
+		oh = omap_hwmod_lookup(opp_def->hwmod_name);
+		if (!oh || !oh->od) {
+			pr_warn("%s: no hwmod or odev for %s, [%d] "
+				"cannot add OPPs.\n", __func__,
+				opp_def->hwmod_name, i);
+			return -EINVAL;
+		}
+		dev = &oh->od->pdev.dev;
+
+		r = opp_add(dev, opp_def->freq, opp_def->u_volt);
+		if (r) {
+			dev_err(dev, "%s: add OPP %ld failed for %s [%d] "
+				"result=%d\n",
+			       __func__, opp_def->freq,
+			       opp_def->hwmod_name, i, r);
+		} else {
+			if (!opp_def->default_available)
+				r = opp_disable(dev, opp_def->freq);
+			if (r)
+				dev_err(dev, "%s: disable %ld failed for %s "
+					"[%d] result=%d\n",
+					__func__, opp_def->freq,
+					opp_def->hwmod_name, i, r);
+		}
+		opp_def++;
+	}
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
new file mode 100644
index 00000000000..0486fce8a92
--- /dev/null
+++ b/arch/arm/mach-omap2/opp3xxx_data.c
@@ -0,0 +1,107 @@
+/*
+ * OMAP3 OPP table definitions.
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated - http://www.ti.com/
+ *	Nishanth Menon
+ *	Kevin Hilman
+ * Copyright (C) 2010 Nokia Corporation.
+ *      Eduardo Valentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+
+#include <plat/cpu.h>
+
+#include "omap_opp_data.h"
+
+static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
+	/* MPU OPP1 */
+	OPP_INITIALIZER("mpu", true, 125000000, 975000),
+	/* MPU OPP2 */
+	OPP_INITIALIZER("mpu", true, 250000000, 1075000),
+	/* MPU OPP3 */
+	OPP_INITIALIZER("mpu", true, 500000000, 1200000),
+	/* MPU OPP4 */
+	OPP_INITIALIZER("mpu", true, 550000000, 1270000),
+	/* MPU OPP5 */
+	OPP_INITIALIZER("mpu", true, 600000000, 1350000),
+
+	/*
+	 * L3 OPP1 - 41.5 MHz is disabled because: The voltage for that OPP is
+	 * almost the same than the one at 83MHz thus providing very little
+	 * gain for the power point of view. In term of energy it will even
+	 * increase the consumption due to the very negative performance
+	 * impact that frequency will do to the MPU and the whole system in
+	 * general.
+	 */
+	OPP_INITIALIZER("l3_main", false, 41500000, 975000),
+	/* L3 OPP2 */
+	OPP_INITIALIZER("l3_main", true, 83000000, 1050000),
+	/* L3 OPP3 */
+	OPP_INITIALIZER("l3_main", true, 166000000, 1150000),
+
+	/* DSP OPP1 */
+	OPP_INITIALIZER("iva", true, 90000000, 975000),
+	/* DSP OPP2 */
+	OPP_INITIALIZER("iva", true, 180000000, 1075000),
+	/* DSP OPP3 */
+	OPP_INITIALIZER("iva", true, 360000000, 1200000),
+	/* DSP OPP4 */
+	OPP_INITIALIZER("iva", true, 400000000, 1270000),
+	/* DSP OPP5 */
+	OPP_INITIALIZER("iva", true, 430000000, 1350000),
+};
+
+static struct omap_opp_def __initdata omap36xx_opp_def_list[] = {
+	/* MPU OPP1 - OPP50 */
+	OPP_INITIALIZER("mpu", true,  300000000, 1012500),
+	/* MPU OPP2 - OPP100 */
+	OPP_INITIALIZER("mpu", true,  600000000, 1200000),
+	/* MPU OPP3 - OPP-Turbo */
+	OPP_INITIALIZER("mpu", false, 800000000, 1325000),
+	/* MPU OPP4 - OPP-SB */
+	OPP_INITIALIZER("mpu", false, 1000000000, 1375000),
+
+	/* L3 OPP1 - OPP50 */
+	OPP_INITIALIZER("l3_main", true, 100000000, 1000000),
+	/* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */
+	OPP_INITIALIZER("l3_main", true, 200000000, 1200000),
+
+	/* DSP OPP1 - OPP50 */
+	OPP_INITIALIZER("iva", true,  260000000, 1012500),
+	/* DSP OPP2 - OPP100 */
+	OPP_INITIALIZER("iva", true,  520000000, 1200000),
+	/* DSP OPP3 - OPP-Turbo */
+	OPP_INITIALIZER("iva", false, 660000000, 1325000),
+	/* DSP OPP4 - OPP-SB */
+	OPP_INITIALIZER("iva", false, 800000000, 1375000),
+};
+
+/**
+ * omap3_opp_init() - initialize omap3 opp table
+ */
+static int __init omap3_opp_init(void)
+{
+	int r = -ENODEV;
+
+	if (!cpu_is_omap34xx())
+		return r;
+
+	if (cpu_is_omap3630())
+		r = omap_init_opp_table(omap36xx_opp_def_list,
+			ARRAY_SIZE(omap36xx_opp_def_list));
+	else
+		r = omap_init_opp_table(omap34xx_opp_def_list,
+			ARRAY_SIZE(omap34xx_opp_def_list));
+
+	return r;
+}
+device_initcall(omap3_opp_init);
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
new file mode 100644
index 00000000000..a11fa566d8e
--- /dev/null
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -0,0 +1,57 @@
+/*
+ * OMAP4 OPP table definitions.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *	Nishanth Menon
+ *	Kevin Hilman
+ *	Thara Gopinath
+ * Copyright (C) 2010 Nokia Corporation.
+ *      Eduardo Valentin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/module.h>
+
+#include <plat/cpu.h>
+
+#include "omap_opp_data.h"
+
+static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
+	/* MPU OPP1 - OPP50 */
+	OPP_INITIALIZER("mpu", true, 300000000, 1100000),
+	/* MPU OPP2 - OPP100 */
+	OPP_INITIALIZER("mpu", true, 600000000, 1200000),
+	/* MPU OPP3 - OPP-Turbo */
+	OPP_INITIALIZER("mpu", false, 800000000, 1260000),
+	/* MPU OPP4 - OPP-SB */
+	OPP_INITIALIZER("mpu", false, 1008000000, 1350000),
+	/* L3 OPP1 - OPP50 */
+	OPP_INITIALIZER("l3_main_1", true, 100000000, 930000),
+	/* L3 OPP2 - OPP100, OPP-Turbo, OPP-SB */
+	OPP_INITIALIZER("l3_main_1", true, 200000000, 1100000),
+	/* TODO: add IVA, DSP, aess, fdif, gpu */
+};
+
+/**
+ * omap4_opp_init() - initialize omap4 opp table
+ */
+static int __init omap4_opp_init(void)
+{
+	int r = -ENODEV;
+
+	if (!cpu_is_omap44xx())
+		return r;
+
+	r = omap_init_opp_table(omap44xx_opp_def_list,
+			ARRAY_SIZE(omap44xx_opp_def_list));
+
+	return r;
+}
+device_initcall(omap4_opp_init);
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 5e81517a7af..125f56591fb 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -29,12 +29,13 @@
 
 #include <plat/clock.h>
 #include <plat/board.h>
-#include <plat/powerdomain.h>
-#include <plat/clockdomain.h>
+#include "powerdomain.h"
+#include "clockdomain.h"
 #include <plat/dmtimer.h>
+#include <plat/omap-pm.h>
 
-#include "prm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
 #include "pm.h"
 
 int omap2_pm_debug;
@@ -45,10 +46,10 @@ u32 wakeup_timer_milliseconds;
 
 #define DUMP_PRM_MOD_REG(mod, reg)    \
 	regs[reg_count].name = #mod "." #reg; \
-	regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+	regs[reg_count++].val = omap2_prm_read_mod_reg(mod, reg)
 #define DUMP_CM_MOD_REG(mod, reg)     \
 	regs[reg_count].name = #mod "." #reg; \
-	regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+	regs[reg_count++].val = omap2_cm_read_mod_reg(mod, reg)
 #define DUMP_PRM_REG(reg) \
 	regs[reg_count].name = #reg; \
 	regs[reg_count++].val = __raw_readl(reg)
@@ -161,6 +162,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us)
 		printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
 }
 
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds && !milliseconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %u.%03u secs"
+		" (%d ticks at %d ticks/sec.)\n",
+		seconds, milliseconds, cycles, tick_rate);
+}
+
 #ifdef CONFIG_DEBUG_FS
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -311,10 +329,10 @@ static void pm_dbg_regset_store(u32 *ptr)
 		for (j = pm_dbg_reg_modules[i].low;
 			j <= pm_dbg_reg_modules[i].high; j += 4) {
 			if (pm_dbg_reg_modules[i].type == MOD_CM)
-				val = cm_read_mod_reg(
+				val = omap2_cm_read_mod_reg(
 					pm_dbg_reg_modules[i].offset, j);
 			else
-				val = prm_read_mod_reg(
+				val = omap2_prm_read_mod_reg(
 					pm_dbg_reg_modules[i].offset, j);
 			*(ptr++) = val;
 		}
@@ -354,23 +372,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev)
 	pwrdm->timer = t;
 }
 
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
-	u32 tick_rate, cycles;
-
-	if (!seconds && !milliseconds)
-		return;
-
-	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
-	cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
-	omap_dm_timer_stop(gptimer_wakeup);
-	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
-	pr_info("PM: Resume timer in %u.%03u secs"
-		" (%d ticks at %d ticks/sec.)\n",
-		seconds, milliseconds, cycles, tick_rate);
-}
-
 static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
 {
 	struct seq_file *s = (struct seq_file *)user;
@@ -581,6 +582,10 @@ static int option_set(void *data, u64 val)
 	*option = val;
 
 	if (option == &enable_off_mode) {
+		if (val)
+			omap_pm_enable_off_mode();
+		else
+			omap_pm_disable_off_mode();
 		if (cpu_is_omap34xx())
 			omap3_pm_off_mode_enable(val);
 	}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 59ca03b0e69..d5a102c7198 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -13,13 +13,16 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/err.h>
+#include <linux/opp.h>
 
 #include <plat/omap-pm.h>
 #include <plat/omap_device.h>
 #include <plat/common.h>
+#include <plat/voltage.h>
 
-#include <plat/powerdomain.h>
-#include <plat/clockdomain.h>
+#include "powerdomain.h"
+#include "clockdomain.h"
+#include "pm.h"
 
 static struct omap_device_pm_latency *pm_lats;
 
@@ -89,10 +92,13 @@ static void omap2_init_processor_devices(void)
 	}
 }
 
+/* Types of sleep_switch used in omap_set_pwrdm_state */
+#define FORCEWAKEUP_SWITCH	0
+#define LOWPOWERSTATE_SWITCH	1
+
 /*
  * This sets pwrdm state (other than mpu & core. Currently only ON &
- * RET are supported. Function is assuming that clkdm doesn't have
- * hw_sup mode enabled.
+ * RET are supported.
  */
 int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 {
@@ -114,9 +120,14 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 		return ret;
 
 	if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
-		omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
-		sleep_switch = 1;
-		pwrdm_wait_transition(pwrdm);
+		if ((pwrdm_read_pwrst(pwrdm) > state) &&
+			(pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) {
+			sleep_switch = LOWPOWERSTATE_SWITCH;
+		} else {
+			omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+			pwrdm_wait_transition(pwrdm);
+			sleep_switch = FORCEWAKEUP_SWITCH;
+		}
 	}
 
 	ret = pwrdm_set_next_pwrst(pwrdm, state);
@@ -126,16 +137,106 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 		goto err;
 	}
 
-	if (sleep_switch) {
-		omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
-		pwrdm_wait_transition(pwrdm);
-		pwrdm_state_switch(pwrdm);
+	switch (sleep_switch) {
+	case FORCEWAKEUP_SWITCH:
+		if (pwrdm->pwrdm_clkdms[0]->flags & CLKDM_CAN_ENABLE_AUTO)
+			omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+		else
+			omap2_clkdm_sleep(pwrdm->pwrdm_clkdms[0]);
+		break;
+	case LOWPOWERSTATE_SWITCH:
+		pwrdm_set_lowpwrstchange(pwrdm);
+		break;
+	default:
+		return ret;
 	}
 
+	pwrdm_wait_transition(pwrdm);
+	pwrdm_state_switch(pwrdm);
 err:
 	return ret;
 }
 
+/*
+ * This API is to be called during init to put the various voltage
+ * domains to the voltage as per the opp table. Typically we boot up
+ * at the nominal voltage. So this function finds out the rate of
+ * the clock associated with the voltage domain, finds out the correct
+ * opp entry and puts the voltage domain to the voltage specifies
+ * in the opp entry
+ */
+static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
+						struct device *dev)
+{
+	struct voltagedomain *voltdm;
+	struct clk *clk;
+	struct opp *opp;
+	unsigned long freq, bootup_volt;
+
+	if (!vdd_name || !clk_name || !dev) {
+		printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
+		goto exit;
+	}
+
+	voltdm = omap_voltage_domain_lookup(vdd_name);
+	if (IS_ERR(voltdm)) {
+		printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
+			__func__, vdd_name);
+		goto exit;
+	}
+
+	clk =  clk_get(NULL, clk_name);
+	if (IS_ERR(clk)) {
+		printk(KERN_ERR "%s: unable to get clk %s\n",
+			__func__, clk_name);
+		goto exit;
+	}
+
+	freq = clk->rate;
+	clk_put(clk);
+
+	opp = opp_find_freq_ceil(dev, &freq);
+	if (IS_ERR(opp)) {
+		printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n",
+			__func__, vdd_name);
+		goto exit;
+	}
+
+	bootup_volt = opp_get_voltage(opp);
+	if (!bootup_volt) {
+		printk(KERN_ERR "%s: unable to find voltage corresponding"
+			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);
+		goto exit;
+	}
+
+	omap_voltage_scale_vdd(voltdm, bootup_volt);
+	return 0;
+
+exit:
+	printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
+		__func__, vdd_name);
+	return -EINVAL;
+}
+
+static void __init omap3_init_voltages(void)
+{
+	if (!cpu_is_omap34xx())
+		return;
+
+	omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev);
+	omap2_set_init_voltage("core", "l3_ick", l3_dev);
+}
+
+static void __init omap4_init_voltages(void)
+{
+	if (!cpu_is_omap44xx())
+		return;
+
+	omap2_set_init_voltage("mpu", "dpll_mpu_ck", mpu_dev);
+	omap2_set_init_voltage("core", "l3_div_ck", l3_dev);
+	omap2_set_init_voltage("iva", "dpll_iva_m5x2_ck", iva_dev);
+}
+
 static int __init omap2_common_pm_init(void)
 {
 	omap2_init_processor_devices();
@@ -143,5 +244,24 @@ static int __init omap2_common_pm_init(void)
 
 	return 0;
 }
-device_initcall(omap2_common_pm_init);
+postcore_initcall(omap2_common_pm_init);
+
+static int __init omap2_common_pm_late_init(void)
+{
+	/* Init the OMAP TWL parameters */
+	omap3_twl_init();
+	omap4_twl_init();
+
+	/* Init the voltage layer */
+	omap_voltage_late_init();
 
+	/* Initialize the voltages */
+	omap3_init_voltages();
+	omap4_init_voltages();
+
+	/* Smartreflex device init */
+	omap_devinit_smartreflex();
+
+	return 0;
+}
+late_initcall(omap2_common_pm_late_init);
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 0d75bfd1fdb..1c1b0ab5b97 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,7 +11,9 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-#include <plat/powerdomain.h>
+#include <linux/err.h>
+
+#include "powerdomain.h"
 
 extern void *omap3_secure_ram_storage;
 extern void omap3_pm_off_mode_enable(int);
@@ -20,6 +22,20 @@ extern int omap3_can_sleep(void);
 extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
 extern int omap3_idle_init(void);
 
+#if defined(CONFIG_PM_OPP)
+extern int omap3_opp_init(void);
+extern int omap4_opp_init(void);
+#else
+static inline int omap3_opp_init(void)
+{
+	return -EINVAL;
+}
+static inline int omap4_opp_init(void)
+{
+	return -EINVAL;
+}
+#endif
+
 struct cpuidle_params {
 	u8  valid;
 	u32 sleep_latency;
@@ -58,7 +74,7 @@ extern u32 sleep_while_idle;
 #endif
 
 #if defined(CONFIG_CPU_IDLE)
-extern void omap3_cpuidle_update_states(void);
+extern void omap3_cpuidle_update_states(u32, u32);
 #endif
 
 #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
@@ -80,9 +96,46 @@ extern void save_secure_ram_context(u32 *addr);
 extern void omap3_save_scratchpad_contents(void);
 
 extern unsigned int omap24xx_idle_loop_suspend_sz;
-extern unsigned int omap34xx_suspend_sz;
 extern unsigned int save_secure_ram_context_sz;
 extern unsigned int omap24xx_cpu_suspend_sz;
 extern unsigned int omap34xx_cpu_suspend_sz;
 
+#define PM_RTA_ERRATUM_i608		(1 << 0)
+#define PM_SDRC_WAKEUP_ERRATUM_i583	(1 << 1)
+
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+extern u16 pm34xx_errata;
+#define IS_PM34XX_ERRATUM(id)		(pm34xx_errata & (id))
+extern void enable_omap3630_toggle_l2_on_restore(void);
+#else
+#define IS_PM34XX_ERRATUM(id)		0
+static inline void enable_omap3630_toggle_l2_on_restore(void) { }
+#endif		/* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
+
+#ifdef CONFIG_OMAP_SMARTREFLEX
+extern int omap_devinit_smartreflex(void);
+extern void omap_enable_smartreflex_on_init(void);
+#else
+static inline int omap_devinit_smartreflex(void)
+{
+	return -EINVAL;
+}
+
+static inline void omap_enable_smartreflex_on_init(void) {}
+#endif
+
+#ifdef CONFIG_TWL4030_CORE
+extern int omap3_twl_init(void);
+extern int omap4_twl_init(void);
+#else
+static inline int omap3_twl_init(void)
+{
+	return -EINVAL;
+}
+static inline int omap4_twl_init(void)
+{
+	return -EINVAL;
+}
+#endif
+
 #endif
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index a40457d8192..dac2d1d9987 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -30,6 +30,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 #include <linux/gpio.h>
+#include <linux/console.h>
 
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
@@ -41,16 +42,29 @@
 #include <plat/dma.h>
 #include <plat/board.h>
 
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 #include "pm.h"
 #include "control.h"
 
-#include <plat/powerdomain.h>
-#include <plat/clockdomain.h>
+#include "powerdomain.h"
+#include "clockdomain.h"
+
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+	return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+	return false;
+}
+#endif
 
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
@@ -65,8 +79,8 @@ static int omap2_fclks_active(void)
 {
 	u32 f1, f2;
 
-	f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	f1 = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	f2 = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
 
 	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
 	f1 &= ~(OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_UART2_MASK);
@@ -91,9 +105,9 @@ static void omap2_enter_full_retention(void)
 
 	/* Clear old wake-up events */
 	/* REVISIT: These write to reserved bits? */
-	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
-	prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+	omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
 
 	/*
 	 * Set MPU powerdomain's next power state to RETENTION;
@@ -106,7 +120,7 @@ static void omap2_enter_full_retention(void)
 	l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
 	omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
 
-	omap2_gpio_prepare_for_idle(PWRDM_POWER_RET);
+	omap2_gpio_prepare_for_idle(0);
 
 	if (omap2_pm_debug) {
 		omap2_pm_dump(0, 0, 0);
@@ -118,6 +132,11 @@ static void omap2_enter_full_retention(void)
 	if (omap_irq_pending())
 		goto no_sleep;
 
+	/* Block console output in case it is on one of the OMAP UARTs */
+	if (!is_suspending())
+		if (try_acquire_console_sem())
+			goto no_sleep;
+
 	omap_uart_prepare_idle(0);
 	omap_uart_prepare_idle(1);
 	omap_uart_prepare_idle(2);
@@ -131,6 +150,9 @@ static void omap2_enter_full_retention(void)
 	omap_uart_resume_idle(1);
 	omap_uart_resume_idle(0);
 
+	if (!is_suspending())
+		release_console_sem();
+
 no_sleep:
 	if (omap2_pm_debug) {
 		unsigned long long tmp;
@@ -145,30 +167,30 @@ no_sleep:
 	clk_enable(osc_ck);
 
 	/* clear CORE wake-up events */
-	prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
 
 	/* wakeup domain events - bit 1: GPT1, bit5 GPIO */
-	prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+	omap2_prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
 
 	/* MPU domain wake events */
-	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
 	if (l & 0x01)
-		prm_write_mod_reg(0x01, OCP_MOD,
+		omap2_prm_write_mod_reg(0x01, OCP_MOD,
 				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
 	if (l & 0x20)
-		prm_write_mod_reg(0x20, OCP_MOD,
+		omap2_prm_write_mod_reg(0x20, OCP_MOD,
 				  OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
 
 	/* Mask future PRCM-to-MPU interrupts */
-	prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+	omap2_prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
 }
 
 static int omap2_i2c_active(void)
 {
 	u32 l;
 
-	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
 	return l & (OMAP2420_EN_I2C2_MASK | OMAP2420_EN_I2C1_MASK);
 }
 
@@ -179,13 +201,13 @@ static int omap2_allow_mpu_retention(void)
 	u32 l;
 
 	/* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
-	l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	l = omap2_cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
 	if (l & (OMAP2420_EN_MMC_MASK | OMAP24XX_EN_UART2_MASK |
 		 OMAP24XX_EN_UART1_MASK | OMAP24XX_EN_MCSPI2_MASK |
 		 OMAP24XX_EN_MCSPI1_MASK | OMAP24XX_EN_DSS1_MASK))
 		return 0;
 	/* Check for UART3. */
-	l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+	l = omap2_cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
 	if (l & OMAP24XX_EN_UART3_MASK)
 		return 0;
 	if (sti_console_enabled)
@@ -208,18 +230,18 @@ static void omap2_enter_mpu_retention(void)
 	 * it is in retention mode. */
 	if (omap2_allow_mpu_retention()) {
 		/* REVISIT: These write to reserved bits? */
-		prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
-		prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
-		prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+		omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+		omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+		omap2_prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
 
 		/* Try to enter MPU retention */
-		prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+		omap2_prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
 				  OMAP_LOGICRETSTATE_MASK,
 				  MPU_MOD, OMAP2_PM_PWSTCTRL);
 	} else {
 		/* Block MPU retention */
 
-		prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
+		omap2_prm_write_mod_reg(OMAP_LOGICRETSTATE_MASK, MPU_MOD,
 						 OMAP2_PM_PWSTCTRL);
 		only_idle = 1;
 	}
@@ -277,10 +299,11 @@ out:
 	local_irq_enable();
 }
 
-static int omap2_pm_prepare(void)
+#ifdef CONFIG_SUSPEND
+static int omap2_pm_begin(suspend_state_t state)
 {
-	/* We cannot sleep in idle until we have resumed */
 	disable_hlt();
+	suspend_state = state;
 	return 0;
 }
 
@@ -288,9 +311,9 @@ static int omap2_pm_suspend(void)
 {
 	u32 wken_wkup, mir1;
 
-	wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+	wken_wkup = omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 	wken_wkup &= ~OMAP24XX_EN_GPT1_MASK;
-	prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+	omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
 
 	/* Mask GPT1 */
 	mir1 = omap_readl(0x480fe0a4);
@@ -300,7 +323,7 @@ static int omap2_pm_suspend(void)
 	omap2_enter_full_retention();
 
 	omap_writel(mir1, 0x480fe0a4);
-	prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+	omap2_prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
 
 	return 0;
 }
@@ -321,17 +344,21 @@ static int omap2_pm_enter(suspend_state_t state)
 	return ret;
 }
 
-static void omap2_pm_finish(void)
+static void omap2_pm_end(void)
 {
+	suspend_state = PM_SUSPEND_ON;
 	enable_hlt();
 }
 
 static struct platform_suspend_ops omap_pm_ops = {
-	.prepare	= omap2_pm_prepare,
+	.begin		= omap2_pm_begin,
 	.enter		= omap2_pm_enter,
-	.finish		= omap2_pm_finish,
+	.end		= omap2_pm_end,
 	.valid		= suspend_valid_only_mem,
 };
+#else
+static const struct platform_suspend_ops __initdata omap_pm_ops;
+#endif /* CONFIG_SUSPEND */
 
 /* XXX This function should be shareable between OMAP2xxx and OMAP3 */
 static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
@@ -353,7 +380,7 @@ static void __init prcm_setup_regs(void)
 	struct powerdomain *pwrdm;
 
 	/* Enable autoidle */
-	prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
+	omap2_prm_write_mod_reg(OMAP24XX_AUTOIDLE_MASK, OCP_MOD,
 			  OMAP2_PRCM_SYSCONFIG_OFFSET);
 
 	/*
@@ -392,87 +419,87 @@ static void __init prcm_setup_regs(void)
 	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
 
 	/* Enable clock autoidle for all domains */
-	cm_write_mod_reg(OMAP24XX_AUTO_CAM_MASK |
-			 OMAP24XX_AUTO_MAILBOXES_MASK |
-			 OMAP24XX_AUTO_WDT4_MASK |
-			 OMAP2420_AUTO_WDT3_MASK |
-			 OMAP24XX_AUTO_MSPRO_MASK |
-			 OMAP2420_AUTO_MMC_MASK |
-			 OMAP24XX_AUTO_FAC_MASK |
-			 OMAP2420_AUTO_EAC_MASK |
-			 OMAP24XX_AUTO_HDQ_MASK |
-			 OMAP24XX_AUTO_UART2_MASK |
-			 OMAP24XX_AUTO_UART1_MASK |
-			 OMAP24XX_AUTO_I2C2_MASK |
-			 OMAP24XX_AUTO_I2C1_MASK |
-			 OMAP24XX_AUTO_MCSPI2_MASK |
-			 OMAP24XX_AUTO_MCSPI1_MASK |
-			 OMAP24XX_AUTO_MCBSP2_MASK |
-			 OMAP24XX_AUTO_MCBSP1_MASK |
-			 OMAP24XX_AUTO_GPT12_MASK |
-			 OMAP24XX_AUTO_GPT11_MASK |
-			 OMAP24XX_AUTO_GPT10_MASK |
-			 OMAP24XX_AUTO_GPT9_MASK |
-			 OMAP24XX_AUTO_GPT8_MASK |
-			 OMAP24XX_AUTO_GPT7_MASK |
-			 OMAP24XX_AUTO_GPT6_MASK |
-			 OMAP24XX_AUTO_GPT5_MASK |
-			 OMAP24XX_AUTO_GPT4_MASK |
-			 OMAP24XX_AUTO_GPT3_MASK |
-			 OMAP24XX_AUTO_GPT2_MASK |
-			 OMAP2420_AUTO_VLYNQ_MASK |
-			 OMAP24XX_AUTO_DSS_MASK,
-			 CORE_MOD, CM_AUTOIDLE1);
-	cm_write_mod_reg(OMAP24XX_AUTO_UART3_MASK |
-			 OMAP24XX_AUTO_SSI_MASK |
-			 OMAP24XX_AUTO_USB_MASK,
-			 CORE_MOD, CM_AUTOIDLE2);
-	cm_write_mod_reg(OMAP24XX_AUTO_SDRC_MASK |
-			 OMAP24XX_AUTO_GPMC_MASK |
-			 OMAP24XX_AUTO_SDMA_MASK,
-			 CORE_MOD, CM_AUTOIDLE3);
-	cm_write_mod_reg(OMAP24XX_AUTO_PKA_MASK |
-			 OMAP24XX_AUTO_AES_MASK |
-			 OMAP24XX_AUTO_RNG_MASK |
-			 OMAP24XX_AUTO_SHA_MASK |
-			 OMAP24XX_AUTO_DES_MASK,
-			 CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
-
-	cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI_MASK, OMAP24XX_DSP_MOD,
-			 CM_AUTOIDLE);
+	omap2_cm_write_mod_reg(OMAP24XX_AUTO_CAM_MASK |
+			       OMAP24XX_AUTO_MAILBOXES_MASK |
+			       OMAP24XX_AUTO_WDT4_MASK |
+			       OMAP2420_AUTO_WDT3_MASK |
+			       OMAP24XX_AUTO_MSPRO_MASK |
+			       OMAP2420_AUTO_MMC_MASK |
+			       OMAP24XX_AUTO_FAC_MASK |
+			       OMAP2420_AUTO_EAC_MASK |
+			       OMAP24XX_AUTO_HDQ_MASK |
+			       OMAP24XX_AUTO_UART2_MASK |
+			       OMAP24XX_AUTO_UART1_MASK |
+			       OMAP24XX_AUTO_I2C2_MASK |
+			       OMAP24XX_AUTO_I2C1_MASK |
+			       OMAP24XX_AUTO_MCSPI2_MASK |
+			       OMAP24XX_AUTO_MCSPI1_MASK |
+			       OMAP24XX_AUTO_MCBSP2_MASK |
+			       OMAP24XX_AUTO_MCBSP1_MASK |
+			       OMAP24XX_AUTO_GPT12_MASK |
+			       OMAP24XX_AUTO_GPT11_MASK |
+			       OMAP24XX_AUTO_GPT10_MASK |
+			       OMAP24XX_AUTO_GPT9_MASK |
+			       OMAP24XX_AUTO_GPT8_MASK |
+			       OMAP24XX_AUTO_GPT7_MASK |
+			       OMAP24XX_AUTO_GPT6_MASK |
+			       OMAP24XX_AUTO_GPT5_MASK |
+			       OMAP24XX_AUTO_GPT4_MASK |
+			       OMAP24XX_AUTO_GPT3_MASK |
+			       OMAP24XX_AUTO_GPT2_MASK |
+			       OMAP2420_AUTO_VLYNQ_MASK |
+			       OMAP24XX_AUTO_DSS_MASK,
+			       CORE_MOD, CM_AUTOIDLE1);
+	omap2_cm_write_mod_reg(OMAP24XX_AUTO_UART3_MASK |
+			       OMAP24XX_AUTO_SSI_MASK |
+			       OMAP24XX_AUTO_USB_MASK,
+			       CORE_MOD, CM_AUTOIDLE2);
+	omap2_cm_write_mod_reg(OMAP24XX_AUTO_SDRC_MASK |
+			       OMAP24XX_AUTO_GPMC_MASK |
+			       OMAP24XX_AUTO_SDMA_MASK,
+			       CORE_MOD, CM_AUTOIDLE3);
+	omap2_cm_write_mod_reg(OMAP24XX_AUTO_PKA_MASK |
+			       OMAP24XX_AUTO_AES_MASK |
+			       OMAP24XX_AUTO_RNG_MASK |
+			       OMAP24XX_AUTO_SHA_MASK |
+			       OMAP24XX_AUTO_DES_MASK,
+			       CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+	omap2_cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI_MASK, OMAP24XX_DSP_MOD,
+			       CM_AUTOIDLE);
 
 	/* Put DPLL and both APLLs into autoidle mode */
-	cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
-			 (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
-			 (0x03 << OMAP24XX_AUTO_54M_SHIFT),
-			 PLL_MOD, CM_AUTOIDLE);
-
-	cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL_MASK |
-			 OMAP24XX_AUTO_WDT1_MASK |
-			 OMAP24XX_AUTO_MPU_WDT_MASK |
-			 OMAP24XX_AUTO_GPIOS_MASK |
-			 OMAP24XX_AUTO_32KSYNC_MASK |
-			 OMAP24XX_AUTO_GPT1_MASK,
-			 WKUP_MOD, CM_AUTOIDLE);
+	omap2_cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+			       (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+			       (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+			       PLL_MOD, CM_AUTOIDLE);
+
+	omap2_cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL_MASK |
+			       OMAP24XX_AUTO_WDT1_MASK |
+			       OMAP24XX_AUTO_MPU_WDT_MASK |
+			       OMAP24XX_AUTO_GPIOS_MASK |
+			       OMAP24XX_AUTO_32KSYNC_MASK |
+			       OMAP24XX_AUTO_GPT1_MASK,
+			       WKUP_MOD, CM_AUTOIDLE);
 
 	/* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
 	 * stabilisation */
-	prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
-			  OMAP2_PRCM_CLKSSETUP_OFFSET);
+	omap2_prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+				OMAP2_PRCM_CLKSSETUP_OFFSET);
 
 	/* Configure automatic voltage transition */
-	prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
-			  OMAP2_PRCM_VOLTSETUP_OFFSET);
-	prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK |
-			  (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
-			  OMAP24XX_MEMRETCTRL_MASK |
-			  (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
-			  (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
-			  OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+	omap2_prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+				OMAP2_PRCM_VOLTSETUP_OFFSET);
+	omap2_prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT_MASK |
+				(0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+				OMAP24XX_MEMRETCTRL_MASK |
+				(0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+				(0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+				OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
 
 	/* Enable wake-up events */
-	prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
-			  WKUP_MOD, PM_WKEN);
+	omap2_prm_write_mod_reg(OMAP24XX_EN_GPIOS_MASK | OMAP24XX_EN_GPT1_MASK,
+				WKUP_MOD, PM_WKEN);
 }
 
 static int __init omap2_pm_init(void)
@@ -483,7 +510,7 @@ static int __init omap2_pm_init(void)
 		return -ENODEV;
 
 	printk(KERN_INFO "Power Management for OMAP2 initializing\n");
-	l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+	l = omap2_prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
 	printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
 
 	/* Look up important powerdomains */
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 75c0cd13ad8..5b323f28da2 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -28,10 +28,11 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/console.h>
 
 #include <plat/sram.h>
-#include <plat/clockdomain.h>
-#include <plat/powerdomain.h>
+#include "clockdomain.h"
+#include "powerdomain.h"
 #include <plat/serial.h>
 #include <plat/sdrc.h>
 #include <plat/prcm.h>
@@ -40,20 +41,36 @@
 
 #include <asm/tlbflush.h>
 
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"
 
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "pm.h"
 #include "sdrc.h"
 #include "control.h"
 
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+	return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+	return false;
+}
+#endif
+
 /* Scratchpad offsets */
 #define OMAP343X_TABLE_ADDRESS_OFFSET	   0xc4
 #define OMAP343X_TABLE_VALUE_OFFSET	   0xc0
 #define OMAP343X_CONTROL_REG_VALUE_OFFSET  0xc8
 
+/* pm34xx errata defined in pm.h */
+u16 pm34xx_errata;
+
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
@@ -88,12 +105,12 @@ static void omap3_enable_io_chain(void)
 	int timeout = 0;
 
 	if (omap_rev() >= OMAP3430_REV_ES3_1) {
-		prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
 				     PM_WKEN);
 		/* Do a readback to assure write has been done */
-		prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+		omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
 
-		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
+		while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
 			 OMAP3430_ST_IO_CHAIN_MASK)) {
 			timeout++;
 			if (timeout > 1000) {
@@ -101,7 +118,7 @@ static void omap3_enable_io_chain(void)
 				       "activation failed.\n");
 				return;
 			}
-			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
+			omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
 					     WKUP_MOD, PM_WKEN);
 		}
 	}
@@ -110,26 +127,17 @@ static void omap3_enable_io_chain(void)
 static void omap3_disable_io_chain(void)
 {
 	if (omap_rev() >= OMAP3430_REV_ES3_1)
-		prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+		omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
 				       PM_WKEN);
 }
 
 static void omap3_core_save_context(void)
 {
-	u32 control_padconf_off;
-
-	/* Save the padconf registers */
-	control_padconf_off = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
-	control_padconf_off |= START_PADCONF_SAVE;
-	omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
-	/* wait for the save to complete */
-	while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
-			& PADCONF_SAVE_DONE))
-		udelay(1);
+	omap3_ctrl_save_padconf();
 
 	/*
 	 * Force write last pad into memory, as this can fail in some
-	 * cases according to erratas 1.157, 1.185
+	 * cases according to errata 1.157, 1.185
 	 */
 	omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
 		OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
@@ -204,27 +212,27 @@ static int prcm_clear_mod_irqs(s16 module, u8 regs)
 		OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
 	int c = 0;
 
-	wkst = prm_read_mod_reg(module, wkst_off);
-	wkst &= prm_read_mod_reg(module, grpsel_off);
+	wkst = omap2_prm_read_mod_reg(module, wkst_off);
+	wkst &= omap2_prm_read_mod_reg(module, grpsel_off);
 	if (wkst) {
-		iclk = cm_read_mod_reg(module, iclk_off);
-		fclk = cm_read_mod_reg(module, fclk_off);
+		iclk = omap2_cm_read_mod_reg(module, iclk_off);
+		fclk = omap2_cm_read_mod_reg(module, fclk_off);
 		while (wkst) {
 			clken = wkst;
-			cm_set_mod_reg_bits(clken, module, iclk_off);
+			omap2_cm_set_mod_reg_bits(clken, module, iclk_off);
 			/*
 			 * For USBHOST, we don't know whether HOST1 or
 			 * HOST2 woke us up, so enable both f-clocks
 			 */
 			if (module == OMAP3430ES2_USBHOST_MOD)
 				clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
-			cm_set_mod_reg_bits(clken, module, fclk_off);
-			prm_write_mod_reg(wkst, module, wkst_off);
-			wkst = prm_read_mod_reg(module, wkst_off);
+			omap2_cm_set_mod_reg_bits(clken, module, fclk_off);
+			omap2_prm_write_mod_reg(wkst, module, wkst_off);
+			wkst = omap2_prm_read_mod_reg(module, wkst_off);
 			c++;
 		}
-		cm_write_mod_reg(iclk, module, iclk_off);
-		cm_write_mod_reg(fclk, module, fclk_off);
+		omap2_cm_write_mod_reg(iclk, module, iclk_off);
+		omap2_cm_write_mod_reg(fclk, module, fclk_off);
 	}
 
 	return c;
@@ -267,9 +275,9 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 	u32 irqenable_mpu, irqstatus_mpu;
 	int c = 0;
 
-	irqenable_mpu = prm_read_mod_reg(OCP_MOD,
+	irqenable_mpu = omap2_prm_read_mod_reg(OCP_MOD,
 					 OMAP3_PRM_IRQENABLE_MPU_OFFSET);
-	irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+	irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD,
 					 OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 	irqstatus_mpu &= irqenable_mpu;
 
@@ -290,10 +298,10 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 			     "no code to handle it (%08x)\n", irqstatus_mpu);
 		}
 
-		prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+		omap2_prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
 					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-		irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+		irqstatus_mpu = omap2_prm_read_mod_reg(OCP_MOD,
 					OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 		irqstatus_mpu &= irqenable_mpu;
 
@@ -343,6 +351,7 @@ void omap_sram_idle(void)
 	int mpu_next_state = PWRDM_POWER_ON;
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
+	int per_going_off;
 	int core_prev_state, per_prev_state;
 	u32 sdrc_pwr = 0;
 
@@ -381,15 +390,23 @@ void omap_sram_idle(void)
 	if (omap3_has_io_wakeup() &&
 	    (per_next_state < PWRDM_POWER_ON ||
 	     core_next_state < PWRDM_POWER_ON)) {
-		prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
+		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
 		omap3_enable_io_chain();
 	}
 
+	/* Block console output in case it is on one of the OMAP UARTs */
+	if (!is_suspending())
+		if (per_next_state < PWRDM_POWER_ON ||
+		    core_next_state < PWRDM_POWER_ON)
+			if (try_acquire_console_sem())
+				goto console_still_active;
+
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
+		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap_uart_prepare_idle(2);
 		omap_uart_prepare_idle(3);
-		omap2_gpio_prepare_for_idle(per_next_state);
+		omap2_gpio_prepare_for_idle(per_going_off);
 		if (per_next_state == PWRDM_POWER_OFF)
 				omap3_per_save_context();
 	}
@@ -400,7 +417,7 @@ void omap_sram_idle(void)
 		omap_uart_prepare_idle(1);
 		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
-			omap3_prcm_save_context();
+			omap3_cm_save_context();
 		}
 	}
 
@@ -409,7 +426,7 @@ void omap_sram_idle(void)
 	/*
 	* On EMU/HS devices ROM code restores a SRDC value
 	* from scratchpad which has automatic self refresh on timeout
-	* of AUTO_CNT = 1 enabled. This takes care of errata 1.142.
+	* of AUTO_CNT = 1 enabled. This takes care of erratum ID i443.
 	* Hence store/restore the SDRC_POWER register here.
 	*/
 	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
@@ -440,14 +457,14 @@ void omap_sram_idle(void)
 		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
 		if (core_prev_state == PWRDM_POWER_OFF) {
 			omap3_core_restore_context();
-			omap3_prcm_restore_context();
+			omap3_cm_restore_context();
 			omap3_sram_restore_context();
 			omap2_sms_restore_context();
 		}
 		omap_uart_resume_idle(0);
 		omap_uart_resume_idle(1);
 		if (core_next_state == PWRDM_POWER_OFF)
-			prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
+			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
 	}
@@ -463,11 +480,16 @@ void omap_sram_idle(void)
 		omap_uart_resume_idle(3);
 	}
 
+	if (!is_suspending())
+		release_console_sem();
+
+console_still_active:
 	/* Disable IO-PAD and IO-CHAIN wakeup */
 	if (omap3_has_io_wakeup() &&
 	    (per_next_state < PWRDM_POWER_ON ||
 	     core_next_state < PWRDM_POWER_ON)) {
-		prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
+		omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+					     PM_WKEN);
 		omap3_disable_io_chain();
 	}
 
@@ -504,14 +526,6 @@ out:
 }
 
 #ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state;
-
-static int omap3_pm_prepare(void)
-{
-	disable_hlt();
-	return 0;
-}
-
 static int omap3_pm_suspend(void)
 {
 	struct power_state *pwrst;
@@ -574,14 +588,10 @@ static int omap3_pm_enter(suspend_state_t unused)
 	return ret;
 }
 
-static void omap3_pm_finish(void)
-{
-	enable_hlt();
-}
-
 /* Hooks to enable / disable UART interrupts during suspend */
 static int omap3_pm_begin(suspend_state_t state)
 {
+	disable_hlt();
 	suspend_state = state;
 	omap_uart_enable_irqs(0);
 	return 0;
@@ -591,15 +601,14 @@ static void omap3_pm_end(void)
 {
 	suspend_state = PM_SUSPEND_ON;
 	omap_uart_enable_irqs(1);
+	enable_hlt();
 	return;
 }
 
 static struct platform_suspend_ops omap_pm_ops = {
 	.begin		= omap3_pm_begin,
 	.end		= omap3_pm_end,
-	.prepare	= omap3_pm_prepare,
 	.enter		= omap3_pm_enter,
-	.finish		= omap3_pm_finish,
 	.valid		= suspend_valid_only_mem,
 };
 #endif /* CONFIG_SUSPEND */
@@ -618,21 +627,21 @@ static struct platform_suspend_ops omap_pm_ops = {
 static void __init omap3_iva_idle(void)
 {
 	/* ensure IVA2 clock is disabled */
-	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
 
 	/* if no clock activity, nothing else to do */
-	if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+	if (!(omap2_cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
 	      OMAP3430_CLKACTIVITY_IVA2_MASK))
 		return;
 
 	/* Reset IVA2 */
-	prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+	omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
 			  OMAP3430_RST2_IVA2_MASK |
 			  OMAP3430_RST3_IVA2_MASK,
 			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 
 	/* Enable IVA2 clock */
-	cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
+	omap2_cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK,
 			 OMAP3430_IVA2_MOD, CM_FCLKEN);
 
 	/* Set IVA2 boot mode to 'idle' */
@@ -640,13 +649,13 @@ static void __init omap3_iva_idle(void)
 			 OMAP343X_CONTROL_IVA2_BOOTMOD);
 
 	/* Un-reset IVA2 */
-	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 
 	/* Disable IVA2 clock */
-	cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+	omap2_cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
 
 	/* Reset IVA2 */
-	prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
+	omap2_prm_write_mod_reg(OMAP3430_RST1_IVA2_MASK |
 			  OMAP3430_RST2_IVA2_MASK |
 			  OMAP3430_RST3_IVA2_MASK,
 			  OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
@@ -670,10 +679,10 @@ static void __init omap3_d2d_idle(void)
 	omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
 
 	/* reset modem */
-	prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
+	omap2_prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON_MASK |
 			  OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST_MASK,
 			  CORE_MOD, OMAP2_RM_RSTCTRL);
-	prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
+	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP2_RM_RSTCTRL);
 }
 
 static void __init prcm_setup_regs(void)
@@ -688,23 +697,23 @@ static void __init prcm_setup_regs(void)
 
 	/* XXX Reset all wkdeps. This should be done when initializing
 	 * powerdomains */
-	prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
-	prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
-	prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
-	prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
-	prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
-	prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+	omap2_prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+	omap2_prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+	omap2_prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+	omap2_prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+	omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
-		prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+		omap2_prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+		omap2_prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
 	} else
-		prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+		omap2_prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
 
 	/*
 	 * Enable interface clock autoidle for all modules.
 	 * Note that in the long run this should be done by clockfw
 	 */
-	cm_write_mod_reg(
+	omap2_cm_write_mod_reg(
 		OMAP3430_AUTO_MODEM_MASK |
 		OMAP3430ES2_AUTO_MMC3_MASK |
 		OMAP3430ES2_AUTO_ICR_MASK |
@@ -737,7 +746,7 @@ static void __init prcm_setup_regs(void)
 		OMAP3430_AUTO_SSI_MASK,
 		CORE_MOD, CM_AUTOIDLE1);
 
-	cm_write_mod_reg(
+	omap2_cm_write_mod_reg(
 		OMAP3430_AUTO_PKA_MASK |
 		OMAP3430_AUTO_AES1_MASK |
 		OMAP3430_AUTO_RNG_MASK |
@@ -746,13 +755,13 @@ static void __init prcm_setup_regs(void)
 		CORE_MOD, CM_AUTOIDLE2);
 
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		cm_write_mod_reg(
+		omap2_cm_write_mod_reg(
 			OMAP3430_AUTO_MAD2D_MASK |
 			OMAP3430ES2_AUTO_USBTLL_MASK,
 			CORE_MOD, CM_AUTOIDLE3);
 	}
 
-	cm_write_mod_reg(
+	omap2_cm_write_mod_reg(
 		OMAP3430_AUTO_WDT2_MASK |
 		OMAP3430_AUTO_WDT1_MASK |
 		OMAP3430_AUTO_GPIO1_MASK |
@@ -761,17 +770,17 @@ static void __init prcm_setup_regs(void)
 		OMAP3430_AUTO_GPT1_MASK,
 		WKUP_MOD, CM_AUTOIDLE);
 
-	cm_write_mod_reg(
+	omap2_cm_write_mod_reg(
 		OMAP3430_AUTO_DSS_MASK,
 		OMAP3430_DSS_MOD,
 		CM_AUTOIDLE);
 
-	cm_write_mod_reg(
+	omap2_cm_write_mod_reg(
 		OMAP3430_AUTO_CAM_MASK,
 		OMAP3430_CAM_MOD,
 		CM_AUTOIDLE);
 
-	cm_write_mod_reg(
+	omap2_cm_write_mod_reg(
 		omap3630_auto_uart4_mask |
 		OMAP3430_AUTO_GPIO6_MASK |
 		OMAP3430_AUTO_GPIO5_MASK |
@@ -795,7 +804,7 @@ static void __init prcm_setup_regs(void)
 		CM_AUTOIDLE);
 
 	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		cm_write_mod_reg(
+		omap2_cm_write_mod_reg(
 			OMAP3430ES2_AUTO_USBHOST_MASK,
 			OMAP3430ES2_USBHOST_MOD,
 			CM_AUTOIDLE);
@@ -807,16 +816,16 @@ static void __init prcm_setup_regs(void)
 	 * Set all plls to autoidle. This is needed until autoidle is
 	 * enabled by clockfw
 	 */
-	cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+	omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
 			 OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
-	cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+	omap2_cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
 			 MPU_MOD,
 			 CM_AUTOIDLE2);
-	cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+	omap2_cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
 			 (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
 			 PLL_MOD,
 			 CM_AUTOIDLE);
-	cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+	omap2_cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
 			 PLL_MOD,
 			 CM_AUTOIDLE2);
 
@@ -825,31 +834,31 @@ static void __init prcm_setup_regs(void)
 	 * sys_clkreq. In the long run clock framework should
 	 * take care of this.
 	 */
-	prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+	omap2_prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
 			     1 << OMAP_AUTOEXTCLKMODE_SHIFT,
 			     OMAP3430_GR_MOD,
 			     OMAP3_PRM_CLKSRC_CTRL_OFFSET);
 
 	/* setup wakup source */
-	prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
+	omap2_prm_write_mod_reg(OMAP3430_EN_IO_MASK | OMAP3430_EN_GPIO1_MASK |
 			  OMAP3430_EN_GPT1_MASK | OMAP3430_EN_GPT12_MASK,
 			  WKUP_MOD, PM_WKEN);
 	/* No need to write EN_IO, that is always enabled */
-	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
+	omap2_prm_write_mod_reg(OMAP3430_GRPSEL_GPIO1_MASK |
 			  OMAP3430_GRPSEL_GPT1_MASK |
 			  OMAP3430_GRPSEL_GPT12_MASK,
 			  WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
 	/* For some reason IO doesn't generate wakeup event even if
 	 * it is selected to mpu wakeup goup */
-	prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK,
+	omap2_prm_write_mod_reg(OMAP3430_IO_EN_MASK | OMAP3430_WKUP_EN_MASK,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
 	/* Enable PM_WKEN to support DSS LPR */
-	prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
+	omap2_prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS_MASK,
 				OMAP3430_DSS_MOD, PM_WKEN);
 
 	/* Enable wakeups in PER */
-	prm_write_mod_reg(omap3630_en_uart4_mask |
+	omap2_prm_write_mod_reg(omap3630_en_uart4_mask |
 			  OMAP3430_EN_GPIO2_MASK | OMAP3430_EN_GPIO3_MASK |
 			  OMAP3430_EN_GPIO4_MASK | OMAP3430_EN_GPIO5_MASK |
 			  OMAP3430_EN_GPIO6_MASK | OMAP3430_EN_UART3_MASK |
@@ -857,7 +866,7 @@ static void __init prcm_setup_regs(void)
 			  OMAP3430_EN_MCBSP4_MASK,
 			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
-	prm_write_mod_reg(omap3630_grpsel_uart4_mask |
+	omap2_prm_write_mod_reg(omap3630_grpsel_uart4_mask |
 			  OMAP3430_GRPSEL_GPIO2_MASK |
 			  OMAP3430_GRPSEL_GPIO3_MASK |
 			  OMAP3430_GRPSEL_GPIO4_MASK |
@@ -870,22 +879,22 @@ static void __init prcm_setup_regs(void)
 			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
 	/* Don't attach IVA interrupts */
-	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
-	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
-	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
-	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+	omap2_prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	omap2_prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
 
 	/* Clear any pending 'reset' flags */
-	prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
-	prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, MPU_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, OMAP2_RM_RSTST);
+	omap2_prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, OMAP2_RM_RSTST);
 
 	/* Clear any pending PRCM interrupts */
-	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
 	omap3_iva_idle();
 	omap3_d2d_idle();
@@ -902,12 +911,29 @@ void omap3_pm_off_mode_enable(int enable)
 		state = PWRDM_POWER_RET;
 
 #ifdef CONFIG_CPU_IDLE
-	omap3_cpuidle_update_states();
+	/*
+	 * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot
+	 * enable OFF mode in a stable form for previous revisions, restrict
+	 * instead to RET
+	 */
+	if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583))
+		omap3_cpuidle_update_states(state, PWRDM_POWER_RET);
+	else
+		omap3_cpuidle_update_states(state, state);
 #endif
 
 	list_for_each_entry(pwrst, &pwrst_list, node) {
-		pwrst->next_state = state;
-		omap_set_pwrdm_state(pwrst->pwrdm, state);
+		if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) &&
+				pwrst->pwrdm == core_pwrdm &&
+				state == PWRDM_POWER_OFF) {
+			pwrst->next_state = PWRDM_POWER_RET;
+			WARN_ONCE(1,
+				"%s: Core OFF disabled due to errata i583\n",
+				__func__);
+		} else {
+			pwrst->next_state = state;
+		}
+		omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
 	}
 }
 
@@ -979,6 +1005,17 @@ void omap_push_sram_idle(void)
 				save_secure_ram_context_sz);
 }
 
+static void __init pm_errata_configure(void)
+{
+	if (cpu_is_omap3630()) {
+		pm34xx_errata |= PM_RTA_ERRATUM_i608;
+		/* Enable the l2 cache toggling in sleep logic */
+		enable_omap3630_toggle_l2_on_restore();
+		if (omap_rev() < OMAP3630_REV_ES1_2)
+			pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+	}
+}
+
 static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
@@ -988,6 +1025,8 @@ static int __init omap3_pm_init(void)
 	if (!cpu_is_omap34xx())
 		return -ENODEV;
 
+	pm_errata_configure();
+
 	printk(KERN_ERR "Power Management for TI OMAP3.\n");
 
 	/* XXX prcm_setup_regs needs to be before enabling hw
@@ -1035,6 +1074,14 @@ static int __init omap3_pm_init(void)
 	pm_idle = omap3_pm_idle;
 	omap3_idle_init();
 
+	/*
+	 * RTA is disabled during initialization as per erratum i608
+	 * it is safer to disable RTA by the bootloader, but we would like
+	 * to be doubly sure here and prevent any mishaps.
+	 */
+	if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
+		omap3630_ctrl_disable_rta();
+
 	clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
 		omap3_secure_ram_storage =
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index 54544b4fc76..e9f4862c4de 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -16,7 +16,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
 #include <mach/omap4-common.h>
 
 struct power_state {
@@ -31,12 +31,6 @@ struct power_state {
 static LIST_HEAD(pwrst_list);
 
 #ifdef CONFIG_SUSPEND
-static int omap4_pm_prepare(void)
-{
-	disable_hlt();
-	return 0;
-}
-
 static int omap4_pm_suspend(void)
 {
 	do_wfi();
@@ -59,28 +53,22 @@ static int omap4_pm_enter(suspend_state_t suspend_state)
 	return ret;
 }
 
-static void omap4_pm_finish(void)
-{
-	enable_hlt();
-	return;
-}
-
 static int omap4_pm_begin(suspend_state_t state)
 {
+	disable_hlt();
 	return 0;
 }
 
 static void omap4_pm_end(void)
 {
+	enable_hlt();
 	return;
 }
 
 static struct platform_suspend_ops omap_pm_ops = {
 	.begin		= omap4_pm_begin,
 	.end		= omap4_pm_end,
-	.prepare	= omap4_pm_prepare,
 	.enter		= omap4_pm_enter,
-	.finish		= omap4_pm_finish,
 	.valid		= suspend_valid_only_mem,
 };
 #endif /* CONFIG_SUSPEND */
diff --git a/arch/arm/mach-omap2/powerdomain-common.c b/arch/arm/mach-omap2/powerdomain-common.c
new file mode 100644
index 00000000000..171fccd208c
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomain-common.c
@@ -0,0 +1,110 @@
+/*
+ *  linux/arch/arm/mach-omap2/powerdomain-common.c
+ *  Contains common powerdomain framework functions
+ *
+ *  Copyright (C) 2010 Texas Instruments, Inc.
+ *  Copyright (C) 2010 Nokia Corporation
+ *
+ * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include "pm.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "cm-regbits-44xx.h"
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+
+/*
+ * OMAP3 and OMAP4 specific register bit initialisations
+ * Notice that the names here are not according to each power
+ * domain but the bit mapping used applies to all of them
+ */
+/* OMAP3 and OMAP4 Memory Onstate Masks (common across all power domains) */
+#define OMAP_MEM0_ONSTATE_MASK OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK
+#define OMAP_MEM1_ONSTATE_MASK OMAP3430_L1FLATMEMONSTATE_MASK
+#define OMAP_MEM2_ONSTATE_MASK OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK
+#define OMAP_MEM3_ONSTATE_MASK OMAP3430_L2FLATMEMONSTATE_MASK
+#define OMAP_MEM4_ONSTATE_MASK OMAP4430_OCP_NRET_BANK_ONSTATE_MASK
+
+/* OMAP3 and OMAP4 Memory Retstate Masks (common across all power domains) */
+#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK
+#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE_MASK
+#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK
+#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE_MASK
+#define OMAP_MEM4_RETSTATE_MASK OMAP4430_OCP_NRET_BANK_RETSTATE_MASK
+
+/* OMAP3 and OMAP4 Memory Status bits */
+#define OMAP_MEM0_STATEST_MASK OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK
+#define OMAP_MEM1_STATEST_MASK OMAP3430_L1FLATMEMSTATEST_MASK
+#define OMAP_MEM2_STATEST_MASK OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK
+#define OMAP_MEM3_STATEST_MASK OMAP3430_L2FLATMEMSTATEST_MASK
+#define OMAP_MEM4_STATEST_MASK OMAP4430_OCP_NRET_BANK_STATEST_MASK
+
+/* Common Internal functions used across OMAP rev's*/
+u32 omap2_pwrdm_get_mem_bank_onstate_mask(u8 bank)
+{
+	switch (bank) {
+	case 0:
+		return OMAP_MEM0_ONSTATE_MASK;
+	case 1:
+		return OMAP_MEM1_ONSTATE_MASK;
+	case 2:
+		return OMAP_MEM2_ONSTATE_MASK;
+	case 3:
+		return OMAP_MEM3_ONSTATE_MASK;
+	case 4:
+		return OMAP_MEM4_ONSTATE_MASK;
+	default:
+		WARN_ON(1); /* should never happen */
+		return -EEXIST;
+	}
+	return 0;
+}
+
+u32 omap2_pwrdm_get_mem_bank_retst_mask(u8 bank)
+{
+	switch (bank) {
+	case 0:
+		return OMAP_MEM0_RETSTATE_MASK;
+	case 1:
+		return OMAP_MEM1_RETSTATE_MASK;
+	case 2:
+		return OMAP_MEM2_RETSTATE_MASK;
+	case 3:
+		return OMAP_MEM3_RETSTATE_MASK;
+	case 4:
+		return OMAP_MEM4_RETSTATE_MASK;
+	default:
+		WARN_ON(1); /* should never happen */
+		return -EEXIST;
+	}
+	return 0;
+}
+
+u32 omap2_pwrdm_get_mem_bank_stst_mask(u8 bank)
+{
+	switch (bank) {
+	case 0:
+		return OMAP_MEM0_STATEST_MASK;
+	case 1:
+		return OMAP_MEM1_STATEST_MASK;
+	case 2:
+		return OMAP_MEM2_STATEST_MASK;
+	case 3:
+		return OMAP_MEM3_STATEST_MASK;
+	case 4:
+		return OMAP_MEM4_STATEST_MASK;
+	default:
+		WARN_ON(1); /* should never happen */
+		return -EEXIST;
+	}
+	return 0;
+}
+
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 6527ec30dc1..eaed0df1669 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -15,27 +15,19 @@
 #undef DEBUG
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
 #include <linux/list.h>
 #include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <asm/atomic.h>
-
-#include "cm.h"
-#include "cm-regbits-34xx.h"
-#include "cm-regbits-44xx.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
-#include "prm-regbits-44xx.h"
+#include <linux/string.h>
+#include "cm2xxx_3xxx.h"
+#include "prcm44xx.h"
+#include "cm44xx.h"
+#include "prm2xxx_3xxx.h"
+#include "prm44xx.h"
 
 #include <plat/cpu.h>
-#include <plat/powerdomain.h>
-#include <plat/clockdomain.h>
+#include "powerdomain.h"
+#include "clockdomain.h"
 #include <plat/prcm.h>
 
 #include "pm.h"
@@ -45,41 +37,12 @@ enum {
 	PWRDM_STATE_PREV,
 };
 
-/* Variable holding value of the CPU dependent PWRSTCTRL Register Offset */
-static u16 pwrstctrl_reg_offs;
-
-/* Variable holding value of the CPU dependent PWRSTST Register Offset */
-static u16 pwrstst_reg_offs;
-
-/* OMAP3 and OMAP4 specific register bit initialisations
- * Notice that the names here are not according to each power
- * domain but the bit mapping used applies to all of them
- */
-
-/* OMAP3 and OMAP4 Memory Onstate Masks (common across all power domains) */
-#define OMAP_MEM0_ONSTATE_MASK OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK
-#define OMAP_MEM1_ONSTATE_MASK OMAP3430_L1FLATMEMONSTATE_MASK
-#define OMAP_MEM2_ONSTATE_MASK OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK
-#define OMAP_MEM3_ONSTATE_MASK OMAP3430_L2FLATMEMONSTATE_MASK
-#define OMAP_MEM4_ONSTATE_MASK OMAP4430_OCP_NRET_BANK_ONSTATE_MASK
-
-/* OMAP3 and OMAP4 Memory Retstate Masks (common across all power domains) */
-#define OMAP_MEM0_RETSTATE_MASK OMAP3430_SHAREDL1CACHEFLATRETSTATE_MASK
-#define OMAP_MEM1_RETSTATE_MASK OMAP3430_L1FLATMEMRETSTATE_MASK
-#define OMAP_MEM2_RETSTATE_MASK OMAP3430_SHAREDL2CACHEFLATRETSTATE_MASK
-#define OMAP_MEM3_RETSTATE_MASK OMAP3430_L2FLATMEMRETSTATE_MASK
-#define OMAP_MEM4_RETSTATE_MASK OMAP4430_OCP_NRET_BANK_RETSTATE_MASK
-
-/* OMAP3 and OMAP4 Memory Status bits */
-#define OMAP_MEM0_STATEST_MASK OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK
-#define OMAP_MEM1_STATEST_MASK OMAP3430_L1FLATMEMSTATEST_MASK
-#define OMAP_MEM2_STATEST_MASK OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK
-#define OMAP_MEM3_STATEST_MASK OMAP3430_L2FLATMEMSTATEST_MASK
-#define OMAP_MEM4_STATEST_MASK OMAP4430_OCP_NRET_BANK_STATEST_MASK
 
 /* pwrdm_list contains all registered struct powerdomains */
 static LIST_HEAD(pwrdm_list);
 
+static struct pwrdm_ops *arch_pwrdm;
+
 /* Private functions */
 
 static struct powerdomain *_pwrdm_lookup(const char *name)
@@ -110,12 +73,19 @@ static int _pwrdm_register(struct powerdomain *pwrdm)
 {
 	int i;
 
-	if (!pwrdm)
+	if (!pwrdm || !pwrdm->name)
 		return -EINVAL;
 
 	if (!omap_chip_is(pwrdm->omap_chip))
 		return -EINVAL;
 
+	if (cpu_is_omap44xx() &&
+	    pwrdm->prcm_partition == OMAP4430_INVALID_PRCM_PARTITION) {
+		pr_err("powerdomain: %s: missing OMAP4 PRCM partition ID\n",
+		       pwrdm->name);
+		return -EINVAL;
+	}
+
 	if (_pwrdm_lookup(pwrdm->name))
 		return -EEXIST;
 
@@ -211,6 +181,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
 /**
  * pwrdm_init - set up the powerdomain layer
  * @pwrdm_list: array of struct powerdomain pointers to register
+ * @custom_funcs: func pointers for arch specfic implementations
  *
  * Loop through the array of powerdomains @pwrdm_list, registering all
  * that are available on the current CPU. If pwrdm_list is supplied
@@ -218,21 +189,14 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused)
  * registered.  No return value.  XXX pwrdm_list is not really a
  * "list"; it is an array.  Rename appropriately.
  */
-void pwrdm_init(struct powerdomain **pwrdm_list)
+void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs)
 {
 	struct powerdomain **p = NULL;
 
-	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-		pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL;
-		pwrstst_reg_offs = OMAP2_PM_PWSTST;
-	} else if (cpu_is_omap44xx()) {
-		pwrstctrl_reg_offs = OMAP4_PM_PWSTCTRL;
-		pwrstst_reg_offs = OMAP4_PM_PWSTST;
-	} else {
-		printk(KERN_ERR "Power Domain struct not supported for " \
-							"this CPU\n");
-		return;
-	}
+	if (!custom_funcs)
+		WARN(1, "powerdomain: No custom pwrdm functions registered\n");
+	else
+		arch_pwrdm = custom_funcs;
 
 	if (pwrdm_list) {
 		for (p = pwrdm_list; *p; p++)
@@ -431,6 +395,8 @@ int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm)
  */
 int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
 		return -EINVAL;
 
@@ -440,11 +406,10 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 	pr_debug("powerdomain: setting next powerstate for %s to %0x\n",
 		 pwrdm->name, pwrst);
 
-	prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
-			     (pwrst << OMAP_POWERSTATE_SHIFT),
-			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst)
+		ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -457,11 +422,15 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
  */
 int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
 		return -EINVAL;
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
-				 pwrstctrl_reg_offs, OMAP_POWERSTATE_MASK);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_read_next_pwrst)
+		ret = arch_pwrdm->pwrdm_read_next_pwrst(pwrdm);
+
+	return ret;
 }
 
 /**
@@ -474,11 +443,15 @@ int pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
  */
 int pwrdm_read_pwrst(struct powerdomain *pwrdm)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
 		return -EINVAL;
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
-				 pwrstst_reg_offs, OMAP_POWERSTATEST_MASK);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_read_pwrst)
+		ret = arch_pwrdm->pwrdm_read_pwrst(pwrdm);
+
+	return ret;
 }
 
 /**
@@ -491,11 +464,15 @@ int pwrdm_read_pwrst(struct powerdomain *pwrdm)
  */
 int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
 		return -EINVAL;
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
-					OMAP3430_LASTPOWERSTATEENTERED_MASK);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_read_prev_pwrst)
+		ret = arch_pwrdm->pwrdm_read_prev_pwrst(pwrdm);
+
+	return ret;
 }
 
 /**
@@ -511,7 +488,7 @@ int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
  */
 int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
 {
-	u32 v;
+	int ret = -EINVAL;
 
 	if (!pwrdm)
 		return -EINVAL;
@@ -522,17 +499,10 @@ int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
 	pr_debug("powerdomain: setting next logic powerstate for %s to %0x\n",
 		 pwrdm->name, pwrst);
 
-	/*
-	 * The register bit names below may not correspond to the
-	 * actual names of the bits in each powerdomain's register,
-	 * but the type of value returned is the same for each
-	 * powerdomain.
-	 */
-	v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
-	prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
-			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_set_logic_retst)
+		ret = arch_pwrdm->pwrdm_set_logic_retst(pwrdm, pwrst);
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -552,7 +522,7 @@ int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
  */
 int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 {
-	u32 m;
+	int ret = -EINVAL;
 
 	if (!pwrdm)
 		return -EINVAL;
@@ -566,37 +536,10 @@ int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 	pr_debug("powerdomain: setting next memory powerstate for domain %s "
 		 "bank %0x while pwrdm-ON to %0x\n", pwrdm->name, bank, pwrst);
 
-	/*
-	 * The register bit names below may not correspond to the
-	 * actual names of the bits in each powerdomain's register,
-	 * but the type of value returned is the same for each
-	 * powerdomain.
-	 */
-	switch (bank) {
-	case 0:
-		m = OMAP_MEM0_ONSTATE_MASK;
-		break;
-	case 1:
-		m = OMAP_MEM1_ONSTATE_MASK;
-		break;
-	case 2:
-		m = OMAP_MEM2_ONSTATE_MASK;
-		break;
-	case 3:
-		m = OMAP_MEM3_ONSTATE_MASK;
-		break;
-	case 4:
-		m = OMAP_MEM4_ONSTATE_MASK;
-		break;
-	default:
-		WARN_ON(1); /* should never happen */
-		return -EEXIST;
-	}
+	if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_onst)
+		ret = arch_pwrdm->pwrdm_set_mem_onst(pwrdm, bank, pwrst);
 
-	prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)),
-			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
-
-	return 0;
+	return ret;
 }
 
 /**
@@ -617,7 +560,7 @@ int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
  */
 int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 {
-	u32 m;
+	int ret = -EINVAL;
 
 	if (!pwrdm)
 		return -EINVAL;
@@ -631,37 +574,10 @@ int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
 	pr_debug("powerdomain: setting next memory powerstate for domain %s "
 		 "bank %0x while pwrdm-RET to %0x\n", pwrdm->name, bank, pwrst);
 
-	/*
-	 * The register bit names below may not correspond to the
-	 * actual names of the bits in each powerdomain's register,
-	 * but the type of value returned is the same for each
-	 * powerdomain.
-	 */
-	switch (bank) {
-	case 0:
-		m = OMAP_MEM0_RETSTATE_MASK;
-		break;
-	case 1:
-		m = OMAP_MEM1_RETSTATE_MASK;
-		break;
-	case 2:
-		m = OMAP_MEM2_RETSTATE_MASK;
-		break;
-	case 3:
-		m = OMAP_MEM3_RETSTATE_MASK;
-		break;
-	case 4:
-		m = OMAP_MEM4_RETSTATE_MASK;
-		break;
-	default:
-		WARN_ON(1); /* should never happen */
-		return -EEXIST;
-	}
-
-	prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
-			     pwrstctrl_reg_offs);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_set_mem_retst)
+		ret = arch_pwrdm->pwrdm_set_mem_retst(pwrdm, bank, pwrst);
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -675,11 +591,15 @@ int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst)
  */
 int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
 		return -EINVAL;
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstst_reg_offs,
-				       OMAP3430_LOGICSTATEST_MASK);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_read_logic_pwrst)
+		ret = arch_pwrdm->pwrdm_read_logic_pwrst(pwrdm);
+
+	return ret;
 }
 
 /**
@@ -692,17 +612,15 @@ int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
  */
 int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
 		return -EINVAL;
 
-	/*
-	 * The register bit names below may not correspond to the
-	 * actual names of the bits in each powerdomain's register,
-	 * but the type of value returned is the same for each
-	 * powerdomain.
-	 */
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST,
-					OMAP3430_LASTLOGICSTATEENTERED_MASK);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_read_prev_logic_pwrst)
+		ret = arch_pwrdm->pwrdm_read_prev_logic_pwrst(pwrdm);
+
+	return ret;
 }
 
 /**
@@ -715,17 +633,15 @@ int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
  */
 int pwrdm_read_logic_retst(struct powerdomain *pwrdm)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
 		return -EINVAL;
 
-	/*
-	 * The register bit names below may not correspond to the
-	 * actual names of the bits in each powerdomain's register,
-	 * but the type of value returned is the same for each
-	 * powerdomain.
-	 */
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs, pwrstctrl_reg_offs,
-				       OMAP3430_LOGICSTATEST_MASK);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_read_logic_retst)
+		ret = arch_pwrdm->pwrdm_read_logic_retst(pwrdm);
+
+	return ret;
 }
 
 /**
@@ -740,46 +656,21 @@ int pwrdm_read_logic_retst(struct powerdomain *pwrdm)
  */
 int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 {
-	u32 m;
+	int ret = -EINVAL;
 
 	if (!pwrdm)
-		return -EINVAL;
+		return ret;
 
 	if (pwrdm->banks < (bank + 1))
-		return -EEXIST;
+		return ret;
 
 	if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
 		bank = 1;
 
-	/*
-	 * The register bit names below may not correspond to the
-	 * actual names of the bits in each powerdomain's register,
-	 * but the type of value returned is the same for each
-	 * powerdomain.
-	 */
-	switch (bank) {
-	case 0:
-		m = OMAP_MEM0_STATEST_MASK;
-		break;
-	case 1:
-		m = OMAP_MEM1_STATEST_MASK;
-		break;
-	case 2:
-		m = OMAP_MEM2_STATEST_MASK;
-		break;
-	case 3:
-		m = OMAP_MEM3_STATEST_MASK;
-		break;
-	case 4:
-		m = OMAP_MEM4_STATEST_MASK;
-		break;
-	default:
-		WARN_ON(1); /* should never happen */
-		return -EEXIST;
-	}
+	if (arch_pwrdm && arch_pwrdm->pwrdm_read_mem_pwrst)
+		ret = arch_pwrdm->pwrdm_read_mem_pwrst(pwrdm, bank);
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					 pwrstst_reg_offs, m);
+	return ret;
 }
 
 /**
@@ -795,43 +686,21 @@ int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
  */
 int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 {
-	u32 m;
+	int ret = -EINVAL;
 
 	if (!pwrdm)
-		return -EINVAL;
+		return ret;
 
 	if (pwrdm->banks < (bank + 1))
-		return -EEXIST;
+		return ret;
 
 	if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
 		bank = 1;
 
-	/*
-	 * The register bit names below may not correspond to the
-	 * actual names of the bits in each powerdomain's register,
-	 * but the type of value returned is the same for each
-	 * powerdomain.
-	 */
-	switch (bank) {
-	case 0:
-		m = OMAP3430_LASTMEM1STATEENTERED_MASK;
-		break;
-	case 1:
-		m = OMAP3430_LASTMEM2STATEENTERED_MASK;
-		break;
-	case 2:
-		m = OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
-		break;
-	case 3:
-		m = OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
-		break;
-	default:
-		WARN_ON(1); /* should never happen */
-		return -EEXIST;
-	}
+	if (arch_pwrdm && arch_pwrdm->pwrdm_read_prev_mem_pwrst)
+		ret = arch_pwrdm->pwrdm_read_prev_mem_pwrst(pwrdm, bank);
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					OMAP3430_PM_PREPWSTST, m);
+	return ret;
 }
 
 /**
@@ -846,43 +715,18 @@ int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
  */
 int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
 {
-	u32 m;
+	int ret = -EINVAL;
 
 	if (!pwrdm)
-		return -EINVAL;
+		return ret;
 
 	if (pwrdm->banks < (bank + 1))
-		return -EEXIST;
+		return ret;
 
-	/*
-	 * The register bit names below may not correspond to the
-	 * actual names of the bits in each powerdomain's register,
-	 * but the type of value returned is the same for each
-	 * powerdomain.
-	 */
-	switch (bank) {
-	case 0:
-		m = OMAP_MEM0_RETSTATE_MASK;
-		break;
-	case 1:
-		m = OMAP_MEM1_RETSTATE_MASK;
-		break;
-	case 2:
-		m = OMAP_MEM2_RETSTATE_MASK;
-		break;
-	case 3:
-		m = OMAP_MEM3_RETSTATE_MASK;
-		break;
-	case 4:
-		m = OMAP_MEM4_RETSTATE_MASK;
-		break;
-	default:
-		WARN_ON(1); /* should never happen */
-		return -EEXIST;
-	}
+	if (arch_pwrdm && arch_pwrdm->pwrdm_read_mem_retst)
+		ret = arch_pwrdm->pwrdm_read_mem_retst(pwrdm, bank);
 
-	return prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					pwrstctrl_reg_offs, m);
+	return ret;
 }
 
 /**
@@ -896,8 +740,10 @@ int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
  */
 int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
-		return -EINVAL;
+		return ret;
 
 	/*
 	 * XXX should get the powerdomain's current state here;
@@ -907,9 +753,10 @@ int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
 	pr_debug("powerdomain: clearing previous power state reg for %s\n",
 		 pwrdm->name);
 
-	prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_clear_all_prev_pwrst)
+		ret = arch_pwrdm->pwrdm_clear_all_prev_pwrst(pwrdm);
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -925,19 +772,21 @@ int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
  */
 int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
-		return -EINVAL;
+		return ret;
 
 	if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
-		return -EINVAL;
+		return ret;
 
 	pr_debug("powerdomain: %s: setting SAVEANDRESTORE bit\n",
 		 pwrdm->name);
 
-	prm_rmw_mod_reg_bits(0, 1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
-			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_enable_hdwr_sar)
+		ret = arch_pwrdm->pwrdm_enable_hdwr_sar(pwrdm);
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -953,19 +802,21 @@ int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
  */
 int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
-		return -EINVAL;
+		return ret;
 
 	if (!(pwrdm->flags & PWRDM_HAS_HDWR_SAR))
-		return -EINVAL;
+		return ret;
 
 	pr_debug("powerdomain: %s: clearing SAVEANDRESTORE bit\n",
 		 pwrdm->name);
 
-	prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT, 0,
-			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_disable_hdwr_sar)
+		ret = arch_pwrdm->pwrdm_disable_hdwr_sar(pwrdm);
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -992,6 +843,8 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm)
  */
 int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
 {
+	int ret = -EINVAL;
+
 	if (!pwrdm)
 		return -EINVAL;
 
@@ -1001,11 +854,10 @@ int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
 	pr_debug("powerdomain: %s: setting LOWPOWERSTATECHANGE bit\n",
 		 pwrdm->name);
 
-	prm_rmw_mod_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
-			     (1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
-			     pwrdm->prcm_offs, pwrstctrl_reg_offs);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_set_lowpwrstchange)
+		ret = arch_pwrdm->pwrdm_set_lowpwrstchange(pwrdm);
 
-	return 0;
+	return ret;
 }
 
 /**
@@ -1020,32 +872,15 @@ int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
  */
 int pwrdm_wait_transition(struct powerdomain *pwrdm)
 {
-	u32 c = 0;
+	int ret = -EINVAL;
 
 	if (!pwrdm)
 		return -EINVAL;
 
-	/*
-	 * REVISIT: pwrdm_wait_transition() may be better implemented
-	 * via a callback and a periodic timer check -- how long do we expect
-	 * powerdomain transitions to take?
-	 */
-
-	/* XXX Is this udelay() value meaningful? */
-	while ((prm_read_mod_reg(pwrdm->prcm_offs, pwrstst_reg_offs) &
-		OMAP_INTRANSITION_MASK) &&
-	       (c++ < PWRDM_TRANSITION_BAILOUT))
-			udelay(1);
-
-	if (c > PWRDM_TRANSITION_BAILOUT) {
-		printk(KERN_ERR "powerdomain: waited too long for "
-		       "powerdomain %s to complete transition\n", pwrdm->name);
-		return -EAGAIN;
-	}
-
-	pr_debug("powerdomain: completed transition in %d loops\n", c);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition)
+		ret = arch_pwrdm->pwrdm_wait_transition(pwrdm);
 
-	return 0;
+	return ret;
 }
 
 int pwrdm_state_switch(struct powerdomain *pwrdm)
@@ -1075,3 +910,31 @@ int pwrdm_post_transition(void)
 	return 0;
 }
 
+/**
+ * pwrdm_get_context_loss_count - get powerdomain's context loss count
+ * @pwrdm: struct powerdomain * to wait for
+ *
+ * Context loss count is the sum of powerdomain off-mode counter, the
+ * logic off counter and the per-bank memory off counter.  Returns 0
+ * (and WARNs) upon error, otherwise, returns the context loss count.
+ */
+u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm)
+{
+	int i, count;
+
+	if (!pwrdm) {
+		WARN(1, "powerdomain: %s: pwrdm is null\n", __func__);
+		return 0;
+	}
+
+	count = pwrdm->state_counter[PWRDM_POWER_OFF];
+	count += pwrdm->ret_logic_off_counter;
+
+	for (i = 0; i < pwrdm->banks; i++)
+		count += pwrdm->ret_mem_off_counter[i];
+
+	pr_debug("powerdomain: %s: context loss count = %u\n",
+		 pwrdm->name, count);
+
+	return count;
+}
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h
index 9ca420dcd2f..c66431edfeb 100644
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ b/arch/arm/mach-omap2/powerdomain.h
@@ -1,27 +1,29 @@
 /*
- * OMAP2/3 powerdomain control
+ * OMAP2/3/4 powerdomain control
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2008, 2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Nokia Corporation
  *
- * Written by Paul Walmsley
+ * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * XXX This should be moved to the mach-omap2/ directory at the earliest
+ * opportunity.
  */
 
-#ifndef ASM_ARM_ARCH_OMAP_POWERDOMAIN
-#define ASM_ARM_ARCH_OMAP_POWERDOMAIN
+#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAIN_H
+#define __ARCH_ARM_MACH_OMAP2_POWERDOMAIN_H
 
 #include <linux/types.h>
 #include <linux/list.h>
 
-#include <asm/atomic.h>
+#include <linux/atomic.h>
 
 #include <plat/cpu.h>
 
-
 /* Powerdomain basic power states */
 #define PWRDM_POWER_OFF		0x0
 #define PWRDM_POWER_RET		0x1
@@ -81,6 +83,7 @@ struct powerdomain;
  * @name: Powerdomain name
  * @omap_chip: represents the OMAP chip types containing this pwrdm
  * @prcm_offs: the address offset from CM_BASE/PRM_BASE
+ * @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
  * @pwrsts: Possible powerdomain power states
  * @pwrsts_logic_ret: Possible logic power states when pwrdm in RETENTION
  * @flags: Powerdomain flags
@@ -93,6 +96,8 @@ struct powerdomain;
  * @state_counter:
  * @timer:
  * @state_timer:
+ *
+ * @prcm_partition possible values are defined in mach-omap2/prcm44xx.h.
  */
 struct powerdomain {
 	const char *name;
@@ -104,6 +109,7 @@ struct powerdomain {
 	const u8 banks;
 	const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
 	const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
+	const u8 prcm_partition;
 	struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
 	struct list_head node;
 	int state;
@@ -117,8 +123,50 @@ struct powerdomain {
 #endif
 };
 
+/**
+ * struct pwrdm_ops - Arch specfic function implementations
+ * @pwrdm_set_next_pwrst: Set the target power state for a pd
+ * @pwrdm_read_next_pwrst: Read the target power state set for a pd
+ * @pwrdm_read_pwrst: Read the current power state of a pd
+ * @pwrdm_read_prev_pwrst: Read the prev power state entered by the pd
+ * @pwrdm_set_logic_retst: Set the logic state in RET for a pd
+ * @pwrdm_set_mem_onst: Set the Memory state in ON for a pd
+ * @pwrdm_set_mem_retst: Set the Memory state in RET for a pd
+ * @pwrdm_read_logic_pwrst: Read the current logic state of a pd
+ * @pwrdm_read_prev_logic_pwrst: Read the previous logic state entered by a pd
+ * @pwrdm_read_logic_retst: Read the logic state in RET for a pd
+ * @pwrdm_read_mem_pwrst: Read the current memory state of a pd
+ * @pwrdm_read_prev_mem_pwrst: Read the previous memory state entered by a pd
+ * @pwrdm_read_mem_retst: Read the memory state in RET for a pd
+ * @pwrdm_clear_all_prev_pwrst: Clear all previous power states logged for a pd
+ * @pwrdm_enable_hdwr_sar: Enable Hardware Save-Restore feature for the pd
+ * @pwrdm_disable_hdwr_sar: Disable Hardware Save-Restore feature for a pd
+ * @pwrdm_set_lowpwrstchange: Enable pd transitions from a shallow to deep sleep
+ * @pwrdm_wait_transition: Wait for a pd state transition to complete
+ */
+struct pwrdm_ops {
+	int	(*pwrdm_set_next_pwrst)(struct powerdomain *pwrdm, u8 pwrst);
+	int	(*pwrdm_read_next_pwrst)(struct powerdomain *pwrdm);
+	int	(*pwrdm_read_pwrst)(struct powerdomain *pwrdm);
+	int	(*pwrdm_read_prev_pwrst)(struct powerdomain *pwrdm);
+	int	(*pwrdm_set_logic_retst)(struct powerdomain *pwrdm, u8 pwrst);
+	int	(*pwrdm_set_mem_onst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+	int	(*pwrdm_set_mem_retst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
+	int	(*pwrdm_read_logic_pwrst)(struct powerdomain *pwrdm);
+	int	(*pwrdm_read_prev_logic_pwrst)(struct powerdomain *pwrdm);
+	int	(*pwrdm_read_logic_retst)(struct powerdomain *pwrdm);
+	int	(*pwrdm_read_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
+	int	(*pwrdm_read_prev_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
+	int	(*pwrdm_read_mem_retst)(struct powerdomain *pwrdm, u8 bank);
+	int	(*pwrdm_clear_all_prev_pwrst)(struct powerdomain *pwrdm);
+	int	(*pwrdm_enable_hdwr_sar)(struct powerdomain *pwrdm);
+	int	(*pwrdm_disable_hdwr_sar)(struct powerdomain *pwrdm);
+	int	(*pwrdm_set_lowpwrstchange)(struct powerdomain *pwrdm);
+	int	(*pwrdm_wait_transition)(struct powerdomain *pwrdm);
+};
 
-void pwrdm_init(struct powerdomain **pwrdm_list);
+void pwrdm_fw_init(void);
+void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs);
 
 struct powerdomain *pwrdm_lookup(const char *name);
 
@@ -163,5 +211,23 @@ int pwrdm_clkdm_state_switch(struct clockdomain *clkdm);
 int pwrdm_pre_transition(void);
 int pwrdm_post_transition(void);
 int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
+u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
+
+extern void omap2xxx_powerdomains_init(void);
+extern void omap3xxx_powerdomains_init(void);
+extern void omap44xx_powerdomains_init(void);
+
+extern struct pwrdm_ops omap2_pwrdm_operations;
+extern struct pwrdm_ops omap3_pwrdm_operations;
+extern struct pwrdm_ops omap4_pwrdm_operations;
+
+/* Common Internal functions used across OMAP rev's */
+extern u32 omap2_pwrdm_get_mem_bank_onstate_mask(u8 bank);
+extern u32 omap2_pwrdm_get_mem_bank_retst_mask(u8 bank);
+extern u32 omap2_pwrdm_get_mem_bank_stst_mask(u8 bank);
+
+extern struct powerdomain wkup_omap2_pwrdm;
+extern struct powerdomain gfx_omap2_pwrdm;
+
 
 #endif
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
new file mode 100644
index 00000000000..d5233890370
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -0,0 +1,242 @@
+/*
+ * OMAP2 and OMAP3 powerdomain control
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
+ *
+ * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <plat/prcm.h>
+
+#include "powerdomain.h"
+#include "prm-regbits-34xx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "prm-regbits-34xx.h"
+
+
+/* Common functions across OMAP2 and OMAP3 */
+static int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+				(pwrst << OMAP_POWERSTATE_SHIFT),
+				pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+	return 0;
+}
+
+static int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTCTRL,
+					     OMAP_POWERSTATE_MASK);
+}
+
+static int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTST,
+					     OMAP_POWERSTATEST_MASK);
+}
+
+static int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+								u8 pwrst)
+{
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+	omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+				   OMAP2_PM_PWSTCTRL);
+
+	return 0;
+}
+
+static int omap2_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+								u8 pwrst)
+{
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+	omap2_prm_rmw_mod_reg_bits(m, (pwrst << __ffs(m)), pwrdm->prcm_offs,
+				   OMAP2_PM_PWSTCTRL);
+
+	return 0;
+}
+
+static int omap2_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
+
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST,
+					     m);
+}
+
+static int omap2_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTCTRL, m);
+}
+
+static int omap2_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	u32 v;
+
+	v = pwrst << __ffs(OMAP3430_LOGICL1CACHERETSTATE_MASK);
+	omap2_prm_rmw_mod_reg_bits(OMAP3430_LOGICL1CACHERETSTATE_MASK, v,
+				   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+
+	return 0;
+}
+
+static int omap2_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+	u32 c = 0;
+
+	/*
+	 * REVISIT: pwrdm_wait_transition() may be better implemented
+	 * via a callback and a periodic timer check -- how long do we expect
+	 * powerdomain transitions to take?
+	 */
+
+	/* XXX Is this udelay() value meaningful? */
+	while ((omap2_prm_read_mod_reg(pwrdm->prcm_offs, OMAP2_PM_PWSTST) &
+		OMAP_INTRANSITION_MASK) &&
+		(c++ < PWRDM_TRANSITION_BAILOUT))
+			udelay(1);
+
+	if (c > PWRDM_TRANSITION_BAILOUT) {
+		printk(KERN_ERR "powerdomain: waited too long for "
+			"powerdomain %s to complete transition\n", pwrdm->name);
+		return -EAGAIN;
+	}
+
+	pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+	return 0;
+}
+
+/* Applicable only for OMAP3. Not supported on OMAP2 */
+static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP3430_PM_PREPWSTST,
+					     OMAP3430_LASTPOWERSTATEENTERED_MASK);
+}
+
+static int omap3_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTST,
+					     OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int omap3_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTCTRL,
+					     OMAP3430_LOGICSTATEST_MASK);
+}
+
+static int omap3_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP3430_PM_PREPWSTST,
+					     OMAP3430_LASTLOGICSTATEENTERED_MASK);
+}
+
+static int omap3_get_mem_bank_lastmemst_mask(u8 bank)
+{
+	switch (bank) {
+	case 0:
+		return OMAP3430_LASTMEM1STATEENTERED_MASK;
+	case 1:
+		return OMAP3430_LASTMEM2STATEENTERED_MASK;
+	case 2:
+		return OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK;
+	case 3:
+		return OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK;
+	default:
+		WARN_ON(1); /* should never happen */
+		return -EEXIST;
+	}
+	return 0;
+}
+
+static int omap3_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m;
+
+	m = omap3_get_mem_bank_lastmemst_mask(bank);
+
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+				OMAP3430_PM_PREPWSTST, m);
+}
+
+static int omap3_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+	omap2_prm_write_mod_reg(0, pwrdm->prcm_offs, OMAP3430_PM_PREPWSTST);
+	return 0;
+}
+
+static int omap3_pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm)
+{
+	return omap2_prm_rmw_mod_reg_bits(0,
+					  1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+					  pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+}
+
+static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
+{
+	return omap2_prm_rmw_mod_reg_bits(1 << OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+					  0, pwrdm->prcm_offs,
+					  OMAP2_PM_PWSTCTRL);
+}
+
+struct pwrdm_ops omap2_pwrdm_operations = {
+	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
+	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
+	.pwrdm_set_mem_onst	= omap2_pwrdm_set_mem_onst,
+	.pwrdm_set_mem_retst	= omap2_pwrdm_set_mem_retst,
+	.pwrdm_read_mem_pwrst	= omap2_pwrdm_read_mem_pwrst,
+	.pwrdm_read_mem_retst	= omap2_pwrdm_read_mem_retst,
+	.pwrdm_wait_transition	= omap2_pwrdm_wait_transition,
+};
+
+struct pwrdm_ops omap3_pwrdm_operations = {
+	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
+	.pwrdm_read_prev_pwrst	= omap3_pwrdm_read_prev_pwrst,
+	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
+	.pwrdm_read_logic_pwrst	= omap3_pwrdm_read_logic_pwrst,
+	.pwrdm_read_logic_retst	= omap3_pwrdm_read_logic_retst,
+	.pwrdm_read_prev_logic_pwrst	= omap3_pwrdm_read_prev_logic_pwrst,
+	.pwrdm_set_mem_onst	= omap2_pwrdm_set_mem_onst,
+	.pwrdm_set_mem_retst	= omap2_pwrdm_set_mem_retst,
+	.pwrdm_read_mem_pwrst	= omap2_pwrdm_read_mem_pwrst,
+	.pwrdm_read_mem_retst	= omap2_pwrdm_read_mem_retst,
+	.pwrdm_read_prev_mem_pwrst	= omap3_pwrdm_read_prev_mem_pwrst,
+	.pwrdm_clear_all_prev_pwrst	= omap3_pwrdm_clear_all_prev_pwrst,
+	.pwrdm_enable_hdwr_sar	= omap3_pwrdm_enable_hdwr_sar,
+	.pwrdm_disable_hdwr_sar	= omap3_pwrdm_disable_hdwr_sar,
+	.pwrdm_wait_transition	= omap2_pwrdm_wait_transition,
+};
diff --git a/arch/arm/mach-omap2/powerdomain44xx.c b/arch/arm/mach-omap2/powerdomain44xx.c
new file mode 100644
index 00000000000..a7880af4b3d
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomain44xx.c
@@ -0,0 +1,225 @@
+/*
+ * OMAP4 powerdomain control
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
+ *
+ * Derived from mach-omap2/powerdomain.c written by Paul Walmsley
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include "powerdomain.h"
+#include <plat/prcm.h>
+#include "prm2xxx_3xxx.h"
+#include "prm44xx.h"
+#include "prminst44xx.h"
+#include "prm-regbits-44xx.h"
+
+static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
+					(pwrst << OMAP_POWERSTATE_SHIFT),
+					pwrdm->prcm_partition,
+					pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
+	return 0;
+}
+
+static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+	v &= OMAP_POWERSTATE_MASK;
+	v >>= OMAP_POWERSTATE_SHIFT;
+
+	return v;
+}
+
+static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTST);
+	v &= OMAP_POWERSTATEST_MASK;
+	v >>= OMAP_POWERSTATEST_SHIFT;
+
+	return v;
+}
+
+static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTST);
+	v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
+	v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
+
+	return v;
+}
+
+static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
+{
+	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
+					(1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
+					pwrdm->prcm_partition,
+					pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
+	return 0;
+}
+
+static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
+{
+	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
+					OMAP4430_LASTPOWERSTATEENTERED_MASK,
+					pwrdm->prcm_partition,
+					pwrdm->prcm_offs, OMAP4_PM_PWSTST);
+	return 0;
+}
+
+static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	u32 v;
+
+	v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
+	omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
+					pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+
+	return 0;
+}
+
+static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
+				    u8 pwrst)
+{
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
+
+	omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
+					pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+
+	return 0;
+}
+
+static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
+				     u8 pwrst)
+{
+	u32 m;
+
+	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+	omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
+					pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+
+	return 0;
+}
+
+static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTST);
+	v &= OMAP4430_LOGICSTATEST_MASK;
+	v >>= OMAP4430_LOGICSTATEST_SHIFT;
+
+	return v;
+}
+
+static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+	v &= OMAP4430_LOGICRETSTATE_MASK;
+	v >>= OMAP4430_LOGICRETSTATE_SHIFT;
+
+	return v;
+}
+
+static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m, v;
+
+	m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTST);
+	v &= m;
+	v >>= __ffs(m);
+
+	return v;
+}
+
+static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
+{
+	u32 m, v;
+
+	m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
+
+	v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
+					OMAP4_PM_PWSTCTRL);
+	v &= m;
+	v >>= __ffs(m);
+
+	return v;
+}
+
+static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
+{
+	u32 c = 0;
+
+	/*
+	 * REVISIT: pwrdm_wait_transition() may be better implemented
+	 * via a callback and a periodic timer check -- how long do we expect
+	 * powerdomain transitions to take?
+	 */
+
+	/* XXX Is this udelay() value meaningful? */
+	while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
+					    pwrdm->prcm_offs,
+					    OMAP4_PM_PWSTST) &
+		OMAP_INTRANSITION_MASK) &&
+	       (c++ < PWRDM_TRANSITION_BAILOUT))
+		udelay(1);
+
+	if (c > PWRDM_TRANSITION_BAILOUT) {
+		printk(KERN_ERR "powerdomain: waited too long for "
+		       "powerdomain %s to complete transition\n", pwrdm->name);
+		return -EAGAIN;
+	}
+
+	pr_debug("powerdomain: completed transition in %d loops\n", c);
+
+	return 0;
+}
+
+struct pwrdm_ops omap4_pwrdm_operations = {
+	.pwrdm_set_next_pwrst	= omap4_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst	= omap4_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst	= omap4_pwrdm_read_pwrst,
+	.pwrdm_read_prev_pwrst	= omap4_pwrdm_read_prev_pwrst,
+	.pwrdm_set_lowpwrstchange	= omap4_pwrdm_set_lowpwrstchange,
+	.pwrdm_clear_all_prev_pwrst	= omap4_pwrdm_clear_all_prev_pwrst,
+	.pwrdm_set_logic_retst	= omap4_pwrdm_set_logic_retst,
+	.pwrdm_read_logic_pwrst	= omap4_pwrdm_read_logic_pwrst,
+	.pwrdm_read_logic_retst	= omap4_pwrdm_read_logic_retst,
+	.pwrdm_read_mem_pwrst	= omap4_pwrdm_read_mem_pwrst,
+	.pwrdm_read_mem_retst	= omap4_pwrdm_read_mem_retst,
+	.pwrdm_set_mem_onst	= omap4_pwrdm_set_mem_onst,
+	.pwrdm_set_mem_retst	= omap4_pwrdm_set_mem_retst,
+	.pwrdm_wait_transition	= omap4_pwrdm_wait_transition,
+};
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
index 105cbcaefd3..5b4dd971320 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c
@@ -2,10 +2,9 @@
  * OMAP2/3 common powerdomain definitions
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Nokia Corporation
  *
- * Written by Paul Walmsley
- * Debugging and integration fixes by Jouni Högander
+ * Paul Walmsley, Jouni Högander
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -18,9 +17,6 @@
  *    Clock Domain Framework
  */
 
-#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS
-#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS
-
 /*
  * This file contains all of the powerdomains that have some element
  * of software control for the OMAP24xx and OMAP34xx chips.
@@ -49,24 +45,18 @@
  * address offset is different between the C55 and C64 DSPs.
  */
 
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
 
 #include "prcm-common.h"
 #include "prm.h"
-#include "cm.h"
-#include "powerdomains24xx.h"
-#include "powerdomains34xx.h"
-#include "powerdomains44xx.h"
 
 /* OMAP2/3-common powerdomains */
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
 /*
  * The GFX powerdomain is not present on 3430ES2, but currently we do not
  * have a macro to filter it out at compile-time.
  */
-static struct powerdomain gfx_omap2_pwrdm = {
+struct powerdomain gfx_omap2_pwrdm = {
 	.name		  = "gfx_pwrdm",
 	.prcm_offs	  = GFX_MOD,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP24XX |
@@ -82,72 +72,8 @@ static struct powerdomain gfx_omap2_pwrdm = {
 	},
 };
 
-static struct powerdomain wkup_omap2_pwrdm = {
+struct powerdomain wkup_omap2_pwrdm = {
 	.name		= "wkup_pwrdm",
 	.prcm_offs	= WKUP_MOD,
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP24XX | CHIP_IS_OMAP3430),
 };
-
-#endif
-
-
-/* As powerdomains are added or removed above, this list must also be changed */
-static struct powerdomain *powerdomains_omap[] __initdata = {
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	&wkup_omap2_pwrdm,
-	&gfx_omap2_pwrdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-	&dsp_pwrdm,
-	&mpu_24xx_pwrdm,
-	&core_24xx_pwrdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2430
-	&mdm_pwrdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-	&iva2_pwrdm,
-	&mpu_3xxx_pwrdm,
-	&neon_pwrdm,
-	&core_3xxx_pre_es3_1_pwrdm,
-	&core_3xxx_es3_1_pwrdm,
-	&cam_pwrdm,
-	&dss_pwrdm,
-	&per_pwrdm,
-	&emu_pwrdm,
-	&sgx_pwrdm,
-	&usbhost_pwrdm,
-	&dpll1_pwrdm,
-	&dpll2_pwrdm,
-	&dpll3_pwrdm,
-	&dpll4_pwrdm,
-	&dpll5_pwrdm,
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-	&core_44xx_pwrdm,
-	&gfx_44xx_pwrdm,
-	&abe_44xx_pwrdm,
-	&dss_44xx_pwrdm,
-	&tesla_44xx_pwrdm,
-	&wkup_44xx_pwrdm,
-	&cpu0_44xx_pwrdm,
-	&cpu1_44xx_pwrdm,
-	&emu_44xx_pwrdm,
-	&mpu_44xx_pwrdm,
-	&ivahd_44xx_pwrdm,
-	&cam_44xx_pwrdm,
-	&l3init_44xx_pwrdm,
-	&l4per_44xx_pwrdm,
-	&always_on_core_44xx_pwrdm,
-	&cefuse_44xx_pwrdm,
-#endif
-	NULL
-};
-
-
-#endif
diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h
new file mode 100644
index 00000000000..fa311669d53
--- /dev/null
+++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.h
@@ -0,0 +1,22 @@
+/*
+ * OMAP2/3 common powerdomains - prototypes
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAINS2XXX_3XXX_DATA_H
+#define __ARCH_ARM_MACH_OMAP2_POWERDOMAINS2XXX_3XXX_DATA_H
+
+#include "powerdomain.h"
+
+extern struct powerdomain gfx_omap2_pwrdm;
+extern struct powerdomain wkup_omap2_pwrdm;
+
+#endif
diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains2xxx_data.c
index 775093add9b..9b1a3350057 100644
--- a/arch/arm/mach-omap2/powerdomains24xx.h
+++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c
@@ -1,37 +1,28 @@
 /*
- * OMAP24XX powerdomain definitions
+ * OMAP2XXX powerdomain definitions
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2009 Nokia Corporation
+ * Copyright (C) 2007-2010 Nokia Corporation
  *
- * Written by Paul Walmsley
- * Debugging and integration fixes by Jouni Högander
+ * Paul Walmsley, Jouni Högander
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS24XX
-#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS24XX
+#include <linux/kernel.h>
+#include <linux/init.h>
 
-/*
- * N.B. If powerdomains are added or removed from this file, update
- * the array in mach-omap2/powerdomains.h.
- */
-
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
+#include "powerdomains2xxx_3xxx_data.h"
 
 #include "prcm-common.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
 
 /* 24XX powerdomains and dependencies */
 
-#ifdef CONFIG_ARCH_OMAP2
-
 /* Powerdomains */
 
 static struct powerdomain dsp_pwrdm = {
@@ -82,9 +73,6 @@ static struct powerdomain core_24xx_pwrdm = {
 	},
 };
 
-#endif	   /* CONFIG_ARCH_OMAP2 */
-
-
 
 /*
  * 2430-specific powerdomains
@@ -111,5 +99,25 @@ static struct powerdomain mdm_pwrdm = {
 
 #endif     /* CONFIG_ARCH_OMAP2430 */
 
+/* As powerdomains are added or removed above, this list must also be changed */
+static struct powerdomain *powerdomains_omap2xxx[] __initdata = {
 
+	&wkup_omap2_pwrdm,
+	&gfx_omap2_pwrdm,
+
+#ifdef CONFIG_ARCH_OMAP2
+	&dsp_pwrdm,
+	&mpu_24xx_pwrdm,
+	&core_24xx_pwrdm,
 #endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+	&mdm_pwrdm,
+#endif
+	NULL
+};
+
+void __init omap2xxx_powerdomains_init(void)
+{
+	pwrdm_init(powerdomains_omap2xxx, &omap2_pwrdm_operations);
+}
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains3xxx_data.c
index fa904861668..e1bec562625 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
@@ -4,28 +4,23 @@
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
  * Copyright (C) 2007-2010 Nokia Corporation
  *
- * Written by Paul Walmsley
- * Debugging and integration fixes by Jouni Högander
+ * Paul Walmsley, Jouni Högander
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-#ifndef ARCH_ARM_MACH_OMAP2_POWERDOMAINS34XX
-#define ARCH_ARM_MACH_OMAP2_POWERDOMAINS34XX
+#include <linux/kernel.h>
+#include <linux/init.h>
 
-/*
- * N.B. If powerdomains are added or removed from this file, update
- * the array in mach-omap2/powerdomains.h.
- */
-
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
+#include "powerdomains2xxx_3xxx_data.h"
 
 #include "prcm-common.h"
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "prm-regbits-34xx.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 
 /*
@@ -80,6 +75,10 @@ static struct powerdomain mpu_3xxx_pwrdm = {
  * 3430s upto ES3.0 and 3630ES1.0. Hence this feature
  * needs to be disabled on these chips.
  * Refer: 3430 errata ID i459 and 3630 errata ID i579
+ *
+ * Note: setting the SAR flag could help for errata ID i478
+ *  which applies to 3430 <= ES3.1, but since the SAR feature
+ *  is broken, do not use it.
  */
 static struct powerdomain core_3xxx_pre_es3_1_pwrdm = {
 	.name		  = "core_pwrdm",
@@ -108,6 +107,10 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = {
 					  CHIP_GE_OMAP3630ES1_1),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	/*
+	 * Setting the SAR flag for errata ID i478 which applies
+	 *  to 3430 <= ES3.1
+	 */
 	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBTLL only */
 	.banks		  = 2,
 	.pwrsts_mem_ret	  = {
@@ -252,8 +255,33 @@ static struct powerdomain dpll5_pwrdm = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_GE_OMAP3430ES2),
 };
 
+/* As powerdomains are added or removed above, this list must also be changed */
+static struct powerdomain *powerdomains_omap3xxx[] __initdata = {
 
-#endif    /* CONFIG_ARCH_OMAP3 */
+	&wkup_omap2_pwrdm,
+	&gfx_omap2_pwrdm,
+	&iva2_pwrdm,
+	&mpu_3xxx_pwrdm,
+	&neon_pwrdm,
+	&core_3xxx_pre_es3_1_pwrdm,
+	&core_3xxx_es3_1_pwrdm,
+	&cam_pwrdm,
+	&dss_pwrdm,
+	&per_pwrdm,
+	&emu_pwrdm,
+	&sgx_pwrdm,
+	&usbhost_pwrdm,
+	&dpll1_pwrdm,
+	&dpll2_pwrdm,
+	&dpll3_pwrdm,
+	&dpll4_pwrdm,
+	&dpll5_pwrdm,
+#endif
+	NULL
+};
 
 
-#endif
+void __init omap3xxx_powerdomains_init(void)
+{
+	pwrdm_init(powerdomains_omap3xxx, &omap3_pwrdm_operations);
+}
diff --git a/arch/arm/mach-omap2/powerdomains44xx.h b/arch/arm/mach-omap2/powerdomains44xx_data.c
index 9c01b55d610..26d7641076d 100644
--- a/arch/arm/mach-omap2/powerdomains44xx.h
+++ b/arch/arm/mach-omap2/powerdomains44xx_data.c
@@ -19,23 +19,22 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAINS44XX_H
-#define __ARCH_ARM_MACH_OMAP2_POWERDOMAINS44XX_H
+#include <linux/kernel.h>
+#include <linux/init.h>
 
-#include <plat/powerdomain.h>
+#include "powerdomain.h"
 
 #include "prcm-common.h"
-#include "cm.h"
-#include "cm-regbits-44xx.h"
-#include "prm.h"
+#include "prcm44xx.h"
 #include "prm-regbits-44xx.h"
-
-#if defined(CONFIG_ARCH_OMAP4)
+#include "prm44xx.h"
+#include "prcm_mpu44xx.h"
 
 /* core_44xx_pwrdm: CORE power domain */
 static struct powerdomain core_44xx_pwrdm = {
 	.name		  = "core_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_CORE_MOD,
+	.prcm_offs	  = OMAP4430_PRM_CORE_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
@@ -60,7 +59,8 @@ static struct powerdomain core_44xx_pwrdm = {
 /* gfx_44xx_pwrdm: 3D accelerator power domain */
 static struct powerdomain gfx_44xx_pwrdm = {
 	.name		  = "gfx_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_GFX_MOD,
+	.prcm_offs	  = OMAP4430_PRM_GFX_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
@@ -76,7 +76,8 @@ static struct powerdomain gfx_44xx_pwrdm = {
 /* abe_44xx_pwrdm: Audio back end power domain */
 static struct powerdomain abe_44xx_pwrdm = {
 	.name		  = "abe_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_ABE_MOD,
+	.prcm_offs	  = OMAP4430_PRM_ABE_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_OFF,
@@ -95,7 +96,8 @@ static struct powerdomain abe_44xx_pwrdm = {
 /* dss_44xx_pwrdm: Display subsystem power domain */
 static struct powerdomain dss_44xx_pwrdm = {
 	.name		  = "dss_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_DSS_MOD,
+	.prcm_offs	  = OMAP4430_PRM_DSS_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF,
@@ -112,7 +114,8 @@ static struct powerdomain dss_44xx_pwrdm = {
 /* tesla_44xx_pwrdm: Tesla processor power domain */
 static struct powerdomain tesla_44xx_pwrdm = {
 	.name		  = "tesla_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_TESLA_MOD,
+	.prcm_offs	  = OMAP4430_PRM_TESLA_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
@@ -133,7 +136,8 @@ static struct powerdomain tesla_44xx_pwrdm = {
 /* wkup_44xx_pwrdm: Wake-up power domain */
 static struct powerdomain wkup_44xx_pwrdm = {
 	.name		  = "wkup_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_WKUP_MOD,
+	.prcm_offs	  = OMAP4430_PRM_WKUP_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_ON,
 	.banks		  = 1,
@@ -148,7 +152,8 @@ static struct powerdomain wkup_44xx_pwrdm = {
 /* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */
 static struct powerdomain cpu0_44xx_pwrdm = {
 	.name		  = "cpu0_pwrdm",
-	.prcm_offs	  = OMAP4430_PRCM_MPU_CPU0_MOD,
+	.prcm_offs	  = OMAP4430_PRCM_MPU_CPU0_INST,
+	.prcm_partition	  = OMAP4430_PRCM_MPU_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
@@ -164,7 +169,8 @@ static struct powerdomain cpu0_44xx_pwrdm = {
 /* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */
 static struct powerdomain cpu1_44xx_pwrdm = {
 	.name		  = "cpu1_pwrdm",
-	.prcm_offs	  = OMAP4430_PRCM_MPU_CPU1_MOD,
+	.prcm_offs	  = OMAP4430_PRCM_MPU_CPU1_INST,
+	.prcm_partition	  = OMAP4430_PRCM_MPU_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
@@ -180,7 +186,8 @@ static struct powerdomain cpu1_44xx_pwrdm = {
 /* emu_44xx_pwrdm: Emulation power domain */
 static struct powerdomain emu_44xx_pwrdm = {
 	.name		  = "emu_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_EMU_MOD,
+	.prcm_offs	  = OMAP4430_PRM_EMU_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
@@ -195,7 +202,8 @@ static struct powerdomain emu_44xx_pwrdm = {
 /* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */
 static struct powerdomain mpu_44xx_pwrdm = {
 	.name		  = "mpu_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_MPU_MOD,
+	.prcm_offs	  = OMAP4430_PRM_MPU_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
@@ -215,7 +223,8 @@ static struct powerdomain mpu_44xx_pwrdm = {
 /* ivahd_44xx_pwrdm: IVA-HD power domain */
 static struct powerdomain ivahd_44xx_pwrdm = {
 	.name		  = "ivahd_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_IVAHD_MOD,
+	.prcm_offs	  = OMAP4430_PRM_IVAHD_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_OFF,
@@ -238,7 +247,8 @@ static struct powerdomain ivahd_44xx_pwrdm = {
 /* cam_44xx_pwrdm: Camera subsystem power domain */
 static struct powerdomain cam_44xx_pwrdm = {
 	.name		  = "cam_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_CAM_MOD,
+	.prcm_offs	  = OMAP4430_PRM_CAM_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_ON,
 	.banks		  = 1,
@@ -254,9 +264,10 @@ static struct powerdomain cam_44xx_pwrdm = {
 /* l3init_44xx_pwrdm: L3 initators pheripherals power domain  */
 static struct powerdomain l3init_44xx_pwrdm = {
 	.name		  = "l3init_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_L3INIT_MOD,
+	.prcm_offs	  = OMAP4430_PRM_L3INIT_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts		  = PWRSTS_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.banks		  = 1,
 	.pwrsts_mem_ret	= {
@@ -271,9 +282,10 @@ static struct powerdomain l3init_44xx_pwrdm = {
 /* l4per_44xx_pwrdm: Target peripherals power domain */
 static struct powerdomain l4per_44xx_pwrdm = {
 	.name		  = "l4per_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_L4PER_MOD,
+	.prcm_offs	  = OMAP4430_PRM_L4PER_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
-	.pwrsts		  = PWRSTS_OFF_RET_ON,
+	.pwrsts		  = PWRSTS_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
 	.banks		  = 2,
 	.pwrsts_mem_ret	= {
@@ -293,7 +305,8 @@ static struct powerdomain l4per_44xx_pwrdm = {
  */
 static struct powerdomain always_on_core_44xx_pwrdm = {
 	.name		  = "always_on_core_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_ALWAYS_ON_MOD,
+	.prcm_offs	  = OMAP4430_PRM_ALWAYS_ON_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_ON,
 };
@@ -301,7 +314,8 @@ static struct powerdomain always_on_core_44xx_pwrdm = {
 /* cefuse_44xx_pwrdm: Customer efuse controller power domain */
 static struct powerdomain cefuse_44xx_pwrdm = {
 	.name		  = "cefuse_pwrdm",
-	.prcm_offs	  = OMAP4430_PRM_CEFUSE_MOD,
+	.prcm_offs	  = OMAP4430_PRM_CEFUSE_INST,
+	.prcm_partition	  = OMAP4430_PRM_PARTITION,
 	.omap_chip	  = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 	.pwrsts		  = PWRSTS_OFF_ON,
 };
@@ -314,6 +328,28 @@ static struct powerdomain cefuse_44xx_pwrdm = {
  * stdefuse
  */
 
-#endif
+/* As powerdomains are added or removed above, this list must also be changed */
+static struct powerdomain *powerdomains_omap44xx[] __initdata = {
+	&core_44xx_pwrdm,
+	&gfx_44xx_pwrdm,
+	&abe_44xx_pwrdm,
+	&dss_44xx_pwrdm,
+	&tesla_44xx_pwrdm,
+	&wkup_44xx_pwrdm,
+	&cpu0_44xx_pwrdm,
+	&cpu1_44xx_pwrdm,
+	&emu_44xx_pwrdm,
+	&mpu_44xx_pwrdm,
+	&ivahd_44xx_pwrdm,
+	&cam_44xx_pwrdm,
+	&l3init_44xx_pwrdm,
+	&l4per_44xx_pwrdm,
+	&always_on_core_44xx_pwrdm,
+	&cefuse_44xx_pwrdm,
+	NULL
+};
 
-#endif
+void __init omap44xx_powerdomains_init(void)
+{
+	pwrdm_init(powerdomains_omap44xx, &omap4_pwrdm_operations);
+}
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 298a22a754e..87486f55978 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -8,15 +8,12 @@
  * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
- * OMAP4 defines in this file are automatically generated from the OMAP hardware
- * databases.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 
-
 /* Module offsets from both CM_BASE & PRM_BASE */
 
 /*
@@ -51,75 +48,6 @@
 #define OMAP3430_NEON_MOD				0xb00
 #define OMAP3430ES2_USBHOST_MOD				0xc00
 
-#define BITS(n_bit)	\
-	(((1 << n_bit) - 1) | (1 << n_bit))
-
-#define BITFIELD(l_bit, u_bit)	\
-	(BITS(u_bit) & ~((BITS(l_bit)) >> 1))
-
-/* OMAP44XX specific module offsets */
-
-/* CM1 instances */
-
-#define OMAP4430_CM1_OCP_SOCKET_MOD	0x0000
-#define OMAP4430_CM1_CKGEN_MOD		0x0100
-#define OMAP4430_CM1_MPU_MOD		0x0300
-#define OMAP4430_CM1_TESLA_MOD		0x0400
-#define OMAP4430_CM1_ABE_MOD		0x0500
-#define OMAP4430_CM1_RESTORE_MOD	0x0e00
-#define OMAP4430_CM1_INSTR_MOD		0x0f00
-
-/* CM2 instances */
-
-#define OMAP4430_CM2_OCP_SOCKET_MOD	0x0000
-#define OMAP4430_CM2_CKGEN_MOD		0x0100
-#define OMAP4430_CM2_ALWAYS_ON_MOD	0x0600
-#define OMAP4430_CM2_CORE_MOD		0x0700
-#define OMAP4430_CM2_IVAHD_MOD		0x0f00
-#define OMAP4430_CM2_CAM_MOD		0x1000
-#define OMAP4430_CM2_DSS_MOD		0x1100
-#define OMAP4430_CM2_GFX_MOD		0x1200
-#define OMAP4430_CM2_L3INIT_MOD		0x1300
-#define OMAP4430_CM2_L4PER_MOD		0x1400
-#define OMAP4430_CM2_CEFUSE_MOD		0x1600
-#define OMAP4430_CM2_RESTORE_MOD	0x1e00
-#define OMAP4430_CM2_INSTR_MOD		0x1f00
-
-/* PRM instances */
-
-#define OMAP4430_PRM_OCP_SOCKET_MOD	0x0000
-#define OMAP4430_PRM_CKGEN_MOD		0x0100
-#define OMAP4430_PRM_MPU_MOD		0x0300
-#define OMAP4430_PRM_TESLA_MOD		0x0400
-#define OMAP4430_PRM_ABE_MOD		0x0500
-#define OMAP4430_PRM_ALWAYS_ON_MOD	0x0600
-#define OMAP4430_PRM_CORE_MOD		0x0700
-#define OMAP4430_PRM_IVAHD_MOD		0x0f00
-#define OMAP4430_PRM_CAM_MOD		0x1000
-#define OMAP4430_PRM_DSS_MOD		0x1100
-#define OMAP4430_PRM_GFX_MOD		0x1200
-#define OMAP4430_PRM_L3INIT_MOD		0x1300
-#define OMAP4430_PRM_L4PER_MOD		0x1400
-#define OMAP4430_PRM_CEFUSE_MOD		0x1600
-#define OMAP4430_PRM_WKUP_MOD		0x1700
-#define OMAP4430_PRM_WKUP_CM_MOD	0x1800
-#define OMAP4430_PRM_EMU_MOD		0x1900
-#define OMAP4430_PRM_EMU_CM_MOD		0x1a00
-#define OMAP4430_PRM_DEVICE_MOD		0x1b00
-#define OMAP4430_PRM_INSTR_MOD		0x1f00
-
-/* SCRM instances */
-
-#define OMAP4430_SCRM_SCRM_MOD	0x0000
-
-/* PRCM_MPU instances */
-
-#define OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD	0x0000
-#define OMAP4430_PRCM_MPU_DEVICE_PRM_MOD	0x0200
-#define OMAP4430_PRCM_MPU_CPU0_MOD		0x0400
-#define OMAP4430_PRCM_MPU_CPU1_MOD		0x0800
-
-
 /* 24XX register bits shared between CM & PRM registers */
 
 /* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
@@ -243,13 +171,14 @@
 #define OMAP24XX_EN_GPT1_MASK				(1 << 0)
 
 /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT				(1 << 2)
-#define OMAP24XX_ST_GPIOS_MASK				2
-#define OMAP24XX_ST_GPT1_SHIFT				(1 << 0)
-#define OMAP24XX_ST_GPT1_MASK				0
+#define OMAP24XX_ST_GPIOS_SHIFT				2
+#define OMAP24XX_ST_GPIOS_MASK				(1 << 2)
+#define OMAP24XX_ST_GPT1_SHIFT				0
+#define OMAP24XX_ST_GPT1_MASK				(1 << 0)
 
 /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT				(1 << 0)
+#define OMAP2430_ST_MDM_SHIFT				0
+#define OMAP2430_ST_MDM_MASK				(1 << 0)
 
 
 /* 3430 register bits shared between CM & PRM registers */
@@ -460,5 +389,18 @@
 #define OMAP3430_EN_CORE_SHIFT				0
 #define OMAP3430_EN_CORE_MASK				(1 << 0)
 
+
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT		10000
+
+# ifndef __ASSEMBLER__
+extern void __iomem *prm_base;
+extern void __iomem *cm_base;
+extern void __iomem *cm2_base;
+# endif
+
 #endif
 
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index a51846e3a6f..679bcd28576 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -17,7 +17,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
+
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -29,105 +30,27 @@
 
 #include "clock.h"
 #include "clock2xxx.h"
-#include "cm.h"
-#include "prm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
+#include "prm44xx.h"
+#include "prminst44xx.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-44xx.h"
 #include "control.h"
 
-static void __iomem *prm_base;
-static void __iomem *cm_base;
-static void __iomem *cm2_base;
+void __iomem *prm_base;
+void __iomem *cm_base;
+void __iomem *cm2_base;
 
 #define MAX_MODULE_ENABLE_WAIT		100000
 
-struct omap3_prcm_regs {
-	u32 control_padconf_sys_nirq;
-	u32 iva2_cm_clksel1;
-	u32 iva2_cm_clksel2;
-	u32 cm_sysconfig;
-	u32 sgx_cm_clksel;
-	u32 dss_cm_clksel;
-	u32 cam_cm_clksel;
-	u32 per_cm_clksel;
-	u32 emu_cm_clksel;
-	u32 emu_cm_clkstctrl;
-	u32 pll_cm_autoidle2;
-	u32 pll_cm_clksel4;
-	u32 pll_cm_clksel5;
-	u32 pll_cm_clken2;
-	u32 cm_polctrl;
-	u32 iva2_cm_fclken;
-	u32 iva2_cm_clken_pll;
-	u32 core_cm_fclken1;
-	u32 core_cm_fclken3;
-	u32 sgx_cm_fclken;
-	u32 wkup_cm_fclken;
-	u32 dss_cm_fclken;
-	u32 cam_cm_fclken;
-	u32 per_cm_fclken;
-	u32 usbhost_cm_fclken;
-	u32 core_cm_iclken1;
-	u32 core_cm_iclken2;
-	u32 core_cm_iclken3;
-	u32 sgx_cm_iclken;
-	u32 wkup_cm_iclken;
-	u32 dss_cm_iclken;
-	u32 cam_cm_iclken;
-	u32 per_cm_iclken;
-	u32 usbhost_cm_iclken;
-	u32 iva2_cm_autiidle2;
-	u32 mpu_cm_autoidle2;
-	u32 iva2_cm_clkstctrl;
-	u32 mpu_cm_clkstctrl;
-	u32 core_cm_clkstctrl;
-	u32 sgx_cm_clkstctrl;
-	u32 dss_cm_clkstctrl;
-	u32 cam_cm_clkstctrl;
-	u32 per_cm_clkstctrl;
-	u32 neon_cm_clkstctrl;
-	u32 usbhost_cm_clkstctrl;
-	u32 core_cm_autoidle1;
-	u32 core_cm_autoidle2;
-	u32 core_cm_autoidle3;
-	u32 wkup_cm_autoidle;
-	u32 dss_cm_autoidle;
-	u32 cam_cm_autoidle;
-	u32 per_cm_autoidle;
-	u32 usbhost_cm_autoidle;
-	u32 sgx_cm_sleepdep;
-	u32 dss_cm_sleepdep;
-	u32 cam_cm_sleepdep;
-	u32 per_cm_sleepdep;
-	u32 usbhost_cm_sleepdep;
-	u32 cm_clkout_ctrl;
-	u32 prm_clkout_ctrl;
-	u32 sgx_pm_wkdep;
-	u32 dss_pm_wkdep;
-	u32 cam_pm_wkdep;
-	u32 per_pm_wkdep;
-	u32 neon_pm_wkdep;
-	u32 usbhost_pm_wkdep;
-	u32 core_pm_mpugrpsel1;
-	u32 iva2_pm_ivagrpsel1;
-	u32 core_pm_mpugrpsel3;
-	u32 core_pm_ivagrpsel3;
-	u32 wkup_pm_mpugrpsel;
-	u32 wkup_pm_ivagrpsel;
-	u32 per_pm_mpugrpsel;
-	u32 per_pm_ivagrpsel;
-	u32 wkup_pm_wken;
-};
-
-static struct omap3_prcm_regs prcm_context;
-
 u32 omap_prcm_get_reset_sources(void)
 {
 	/* XXX This presumably needs modification for 34XX */
 	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
+		return omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
 	if (cpu_is_omap44xx())
-		return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
+		return omap2_prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
 
 	return 0;
 }
@@ -143,126 +66,46 @@ void omap_prcm_arch_reset(char mode, const char *cmd)
 
 		prcm_offs = WKUP_MOD;
 	} else if (cpu_is_omap34xx()) {
-		u32 l;
-
 		prcm_offs = OMAP3430_GR_MOD;
-		l = ('B' << 24) | ('M' << 16) | (cmd ? (u8)*cmd : 0);
-		/* Reserve the first word in scratchpad for communicating
-		 * with the boot ROM. A pointer to a data structure
-		 * describing the boot process can be stored there,
-		 * cf. OMAP34xx TRM, Initialization / Software Booting
-		 * Configuration. */
-		omap_writel(l, OMAP343X_SCRATCHPAD + 4);
-	} else if (cpu_is_omap44xx())
-		prcm_offs = OMAP4430_PRM_DEVICE_MOD;
-	else
+		omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
+	} else if (cpu_is_omap44xx()) {
+		omap4_prm_global_warm_sw_reset(); /* never returns */
+	} else {
 		WARN_ON(1);
+	}
 
-	if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
-						 OMAP2_RM_RSTCTRL);
-	if (cpu_is_omap44xx())
-		prm_set_mod_reg_bits(OMAP4430_RST_GLOBAL_WARM_SW_MASK,
-				     prcm_offs, OMAP4_RM_RSTCTRL);
-}
-
-static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
-{
-	BUG_ON(!base);
-	return __raw_readl(base + module + reg);
-}
-
-static inline void __omap_prcm_write(u32 value, void __iomem *base,
-						s16 module, u16 reg)
-{
-	BUG_ON(!base);
-	__raw_writel(value, base + module + reg);
-}
-
-/* Read a register in a PRM module */
-u32 prm_read_mod_reg(s16 module, u16 idx)
-{
-	return __omap_prcm_read(prm_base, module, idx);
-}
-
-/* Write into a register in a PRM module */
-void prm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	__omap_prcm_write(val, prm_base, module, idx);
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
-	u32 v;
-
-	v = prm_read_mod_reg(module, idx);
-	v &= ~mask;
-	v |= bits;
-	prm_write_mod_reg(v, module, idx);
-
-	return v;
-}
-
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
-{
-	u32 v;
-
-	v = prm_read_mod_reg(domain, idx);
-	v &= mask;
-	v >>= __ffs(mask);
-
-	return v;
-}
-
-/* Read a PRM register, AND it, and shift the result down to bit 0 */
-u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
-{
-	u32 v;
-
-	v = __raw_readl(reg);
-	v &= mask;
-	v >>= __ffs(mask);
-
-	return v;
-}
-
-/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg)
-{
-	u32 v;
-
-	v = __raw_readl(reg);
-	v &= ~mask;
-	v |= bits;
-	__raw_writel(v, reg);
-
-	return v;
-}
-/* Read a register in a CM module */
-u32 cm_read_mod_reg(s16 module, u16 idx)
-{
-	return __omap_prcm_read(cm_base, module, idx);
-}
-
-/* Write into a register in a CM module */
-void cm_write_mod_reg(u32 val, s16 module, u16 idx)
-{
-	__omap_prcm_write(val, cm_base, module, idx);
-}
-
-/* Read-modify-write a register in a CM module. Caller must lock */
-u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
-{
-	u32 v;
-
-	v = cm_read_mod_reg(module, idx);
-	v &= ~mask;
-	v |= bits;
-	cm_write_mod_reg(v, module, idx);
-
-	return v;
+	/*
+	 * As per Errata i520, in some cases, user will not be able to
+	 * access DDR memory after warm-reset.
+	 * This situation occurs while the warm-reset happens during a read
+	 * access to DDR memory. In that particular condition, DDR memory
+	 * does not respond to a corrupted read command due to the warm
+	 * reset occurrence but SDRC is waiting for read completion.
+	 * SDRC is not sensitive to the warm reset, but the interconnect is
+	 * reset on the fly, thus causing a misalignment between SDRC logic,
+	 * interconnect logic and DDR memory state.
+	 * WORKAROUND:
+	 * Steps to perform before a Warm reset is trigged:
+	 * 1. enable self-refresh on idle request
+	 * 2. put SDRC in idle
+	 * 3. wait until SDRC goes to idle
+	 * 4. generate SW reset (Global SW reset)
+	 *
+	 * Steps to be performed after warm reset occurs (in bootloader):
+	 * if HW warm reset is the source, apply below steps before any
+	 * accesses to SDRAM:
+	 * 1. Reset SMS and SDRC and wait till reset is complete
+	 * 2. Re-initialize SMS, SDRC and memory
+	 *
+	 * NOTE: Above work around is required only if arch reset is implemented
+	 * using Global SW reset(GLOBAL_SW_RST). DPLL3 reset does not need
+	 * the WA since it resets SDRC as well as part of cold reset.
+	 */
+
+	/* XXX should be moved to some OMAP2/3 specific code */
+	omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
+				   OMAP2_RM_RSTCTRL);
+	omap2_prm_read_mod_reg(prcm_offs, OMAP2_RM_RSTCTRL); /* OCP barrier */
 }
 
 /**
@@ -274,6 +117,9 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
  *
  * Returns 1 if the module indicated readiness in time, or 0 if it
  * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
+ *
+ * XXX This function is deprecated.  It should be removed once the
+ * hwmod conversion is complete.
  */
 int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
 				const char *name)
@@ -316,303 +162,3 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 		WARN_ON(!cm2_base);
 	}
 }
-
-#ifdef CONFIG_ARCH_OMAP3
-void omap3_prcm_save_context(void)
-{
-	prcm_context.control_padconf_sys_nirq =
-			 omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
-	prcm_context.iva2_cm_clksel1 =
-			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1);
-	prcm_context.iva2_cm_clksel2 =
-			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2);
-	prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
-	prcm_context.sgx_cm_clksel =
-			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
-	prcm_context.dss_cm_clksel =
-			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
-	prcm_context.cam_cm_clksel =
-			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSEL);
-	prcm_context.per_cm_clksel =
-			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSEL);
-	prcm_context.emu_cm_clksel =
-			 cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
-	prcm_context.emu_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
-	prcm_context.pll_cm_autoidle2 =
-			 cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
-	prcm_context.pll_cm_clksel4 =
-			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
-	prcm_context.pll_cm_clksel5 =
-			 cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
-	prcm_context.pll_cm_clken2 =
-			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
-	prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
-	prcm_context.iva2_cm_fclken =
-			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
-	prcm_context.iva2_cm_clken_pll = cm_read_mod_reg(OMAP3430_IVA2_MOD,
-			OMAP3430_CM_CLKEN_PLL);
-	prcm_context.core_cm_fclken1 =
-			 cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
-	prcm_context.core_cm_fclken3 =
-			 cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
-	prcm_context.sgx_cm_fclken =
-			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_FCLKEN);
-	prcm_context.wkup_cm_fclken =
-			 cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
-	prcm_context.dss_cm_fclken =
-			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_FCLKEN);
-	prcm_context.cam_cm_fclken =
-			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_FCLKEN);
-	prcm_context.per_cm_fclken =
-			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
-	prcm_context.usbhost_cm_fclken =
-			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
-	prcm_context.core_cm_iclken1 =
-			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
-	prcm_context.core_cm_iclken2 =
-			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN2);
-	prcm_context.core_cm_iclken3 =
-			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
-	prcm_context.sgx_cm_iclken =
-			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_ICLKEN);
-	prcm_context.wkup_cm_iclken =
-			 cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
-	prcm_context.dss_cm_iclken =
-			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_ICLKEN);
-	prcm_context.cam_cm_iclken =
-			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_ICLKEN);
-	prcm_context.per_cm_iclken =
-			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
-	prcm_context.usbhost_cm_iclken =
-			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
-	prcm_context.iva2_cm_autiidle2 =
-			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
-	prcm_context.mpu_cm_autoidle2 =
-			 cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
-	prcm_context.iva2_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
-	prcm_context.mpu_cm_clkstctrl =
-			 cm_read_mod_reg(MPU_MOD, OMAP2_CM_CLKSTCTRL);
-	prcm_context.core_cm_clkstctrl =
-			 cm_read_mod_reg(CORE_MOD, OMAP2_CM_CLKSTCTRL);
-	prcm_context.sgx_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
-						OMAP2_CM_CLKSTCTRL);
-	prcm_context.dss_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP2_CM_CLKSTCTRL);
-	prcm_context.cam_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP2_CM_CLKSTCTRL);
-	prcm_context.per_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_PER_MOD, OMAP2_CM_CLKSTCTRL);
-	prcm_context.neon_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430_NEON_MOD, OMAP2_CM_CLKSTCTRL);
-	prcm_context.usbhost_cm_clkstctrl =
-			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-						OMAP2_CM_CLKSTCTRL);
-	prcm_context.core_cm_autoidle1 =
-			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1);
-	prcm_context.core_cm_autoidle2 =
-			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE2);
-	prcm_context.core_cm_autoidle3 =
-			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE3);
-	prcm_context.wkup_cm_autoidle =
-			 cm_read_mod_reg(WKUP_MOD, CM_AUTOIDLE);
-	prcm_context.dss_cm_autoidle =
-			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_AUTOIDLE);
-	prcm_context.cam_cm_autoidle =
-			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_AUTOIDLE);
-	prcm_context.per_cm_autoidle =
-			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
-	prcm_context.usbhost_cm_autoidle =
-			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
-	prcm_context.sgx_cm_sleepdep =
-		 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, OMAP3430_CM_SLEEPDEP);
-	prcm_context.dss_cm_sleepdep =
-		 cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP3430_CM_SLEEPDEP);
-	prcm_context.cam_cm_sleepdep =
-		 cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP3430_CM_SLEEPDEP);
-	prcm_context.per_cm_sleepdep =
-		 cm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_CM_SLEEPDEP);
-	prcm_context.usbhost_cm_sleepdep =
-		 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
-	prcm_context.cm_clkout_ctrl = cm_read_mod_reg(OMAP3430_CCR_MOD,
-		 OMAP3_CM_CLKOUT_CTRL_OFFSET);
-	prcm_context.prm_clkout_ctrl = prm_read_mod_reg(OMAP3430_CCR_MOD,
-		OMAP3_PRM_CLKOUT_CTRL_OFFSET);
-	prcm_context.sgx_pm_wkdep =
-		 prm_read_mod_reg(OMAP3430ES2_SGX_MOD, PM_WKDEP);
-	prcm_context.dss_pm_wkdep =
-		 prm_read_mod_reg(OMAP3430_DSS_MOD, PM_WKDEP);
-	prcm_context.cam_pm_wkdep =
-		 prm_read_mod_reg(OMAP3430_CAM_MOD, PM_WKDEP);
-	prcm_context.per_pm_wkdep =
-		 prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKDEP);
-	prcm_context.neon_pm_wkdep =
-		 prm_read_mod_reg(OMAP3430_NEON_MOD, PM_WKDEP);
-	prcm_context.usbhost_pm_wkdep =
-		 prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
-	prcm_context.core_pm_mpugrpsel1 =
-		 prm_read_mod_reg(CORE_MOD, OMAP3430_PM_MPUGRPSEL1);
-	prcm_context.iva2_pm_ivagrpsel1 =
-		 prm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_PM_IVAGRPSEL1);
-	prcm_context.core_pm_mpugrpsel3 =
-		 prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_MPUGRPSEL3);
-	prcm_context.core_pm_ivagrpsel3 =
-		 prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
-	prcm_context.wkup_pm_mpugrpsel =
-		 prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
-	prcm_context.wkup_pm_ivagrpsel =
-		 prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
-	prcm_context.per_pm_mpugrpsel =
-		 prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
-	prcm_context.per_pm_ivagrpsel =
-		 prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
-	prcm_context.wkup_pm_wken = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-	return;
-}
-
-void omap3_prcm_restore_context(void)
-{
-	omap_ctrl_writel(prcm_context.control_padconf_sys_nirq,
-					 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
-	cm_write_mod_reg(prcm_context.iva2_cm_clksel1, OMAP3430_IVA2_MOD,
-					 CM_CLKSEL1);
-	cm_write_mod_reg(prcm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD,
-					 CM_CLKSEL2);
-	__raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
-	cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
-					 CM_CLKSEL);
-	cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
-					 CM_CLKSEL);
-	cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
-					 CM_CLKSEL);
-	cm_write_mod_reg(prcm_context.per_cm_clksel, OMAP3430_PER_MOD,
-					 CM_CLKSEL);
-	cm_write_mod_reg(prcm_context.emu_cm_clksel, OMAP3430_EMU_MOD,
-					 CM_CLKSEL1);
-	cm_write_mod_reg(prcm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
-					 OMAP2_CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.pll_cm_autoidle2, PLL_MOD,
-					 CM_AUTOIDLE2);
-	cm_write_mod_reg(prcm_context.pll_cm_clksel4, PLL_MOD,
-					OMAP3430ES2_CM_CLKSEL4);
-	cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
-					 OMAP3430ES2_CM_CLKSEL5);
-	cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
-					OMAP3430ES2_CM_CLKEN2);
-	__raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
-	cm_write_mod_reg(prcm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD,
-					 CM_FCLKEN);
-	cm_write_mod_reg(prcm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD,
-					OMAP3430_CM_CLKEN_PLL);
-	cm_write_mod_reg(prcm_context.core_cm_fclken1, CORE_MOD, CM_FCLKEN1);
-	cm_write_mod_reg(prcm_context.core_cm_fclken3, CORE_MOD,
-					 OMAP3430ES2_CM_FCLKEN3);
-	cm_write_mod_reg(prcm_context.sgx_cm_fclken, OMAP3430ES2_SGX_MOD,
-					 CM_FCLKEN);
-	cm_write_mod_reg(prcm_context.wkup_cm_fclken, WKUP_MOD, CM_FCLKEN);
-	cm_write_mod_reg(prcm_context.dss_cm_fclken, OMAP3430_DSS_MOD,
-					 CM_FCLKEN);
-	cm_write_mod_reg(prcm_context.cam_cm_fclken, OMAP3430_CAM_MOD,
-					 CM_FCLKEN);
-	cm_write_mod_reg(prcm_context.per_cm_fclken, OMAP3430_PER_MOD,
-					 CM_FCLKEN);
-	cm_write_mod_reg(prcm_context.usbhost_cm_fclken,
-					 OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
-	cm_write_mod_reg(prcm_context.core_cm_iclken1, CORE_MOD, CM_ICLKEN1);
-	cm_write_mod_reg(prcm_context.core_cm_iclken2, CORE_MOD, CM_ICLKEN2);
-	cm_write_mod_reg(prcm_context.core_cm_iclken3, CORE_MOD, CM_ICLKEN3);
-	cm_write_mod_reg(prcm_context.sgx_cm_iclken, OMAP3430ES2_SGX_MOD,
-					CM_ICLKEN);
-	cm_write_mod_reg(prcm_context.wkup_cm_iclken, WKUP_MOD, CM_ICLKEN);
-	cm_write_mod_reg(prcm_context.dss_cm_iclken, OMAP3430_DSS_MOD,
-					CM_ICLKEN);
-	cm_write_mod_reg(prcm_context.cam_cm_iclken, OMAP3430_CAM_MOD,
-					CM_ICLKEN);
-	cm_write_mod_reg(prcm_context.per_cm_iclken, OMAP3430_PER_MOD,
-					CM_ICLKEN);
-	cm_write_mod_reg(prcm_context.usbhost_cm_iclken,
-					OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
-	cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
-					CM_AUTOIDLE2);
-	cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
-	cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
-					OMAP2_CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD,
-					OMAP2_CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.core_cm_clkstctrl, CORE_MOD,
-					OMAP2_CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD,
-					OMAP2_CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD,
-					OMAP2_CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD,
-					OMAP2_CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.per_cm_clkstctrl, OMAP3430_PER_MOD,
-					OMAP2_CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD,
-					OMAP2_CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.usbhost_cm_clkstctrl,
-				OMAP3430ES2_USBHOST_MOD, OMAP2_CM_CLKSTCTRL);
-	cm_write_mod_reg(prcm_context.core_cm_autoidle1, CORE_MOD,
-					CM_AUTOIDLE1);
-	cm_write_mod_reg(prcm_context.core_cm_autoidle2, CORE_MOD,
-					CM_AUTOIDLE2);
-	cm_write_mod_reg(prcm_context.core_cm_autoidle3, CORE_MOD,
-					CM_AUTOIDLE3);
-	cm_write_mod_reg(prcm_context.wkup_cm_autoidle, WKUP_MOD, CM_AUTOIDLE);
-	cm_write_mod_reg(prcm_context.dss_cm_autoidle, OMAP3430_DSS_MOD,
-					CM_AUTOIDLE);
-	cm_write_mod_reg(prcm_context.cam_cm_autoidle, OMAP3430_CAM_MOD,
-					CM_AUTOIDLE);
-	cm_write_mod_reg(prcm_context.per_cm_autoidle, OMAP3430_PER_MOD,
-					CM_AUTOIDLE);
-	cm_write_mod_reg(prcm_context.usbhost_cm_autoidle,
-					OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
-	cm_write_mod_reg(prcm_context.sgx_cm_sleepdep, OMAP3430ES2_SGX_MOD,
-					OMAP3430_CM_SLEEPDEP);
-	cm_write_mod_reg(prcm_context.dss_cm_sleepdep, OMAP3430_DSS_MOD,
-					OMAP3430_CM_SLEEPDEP);
-	cm_write_mod_reg(prcm_context.cam_cm_sleepdep, OMAP3430_CAM_MOD,
-					OMAP3430_CM_SLEEPDEP);
-	cm_write_mod_reg(prcm_context.per_cm_sleepdep, OMAP3430_PER_MOD,
-					OMAP3430_CM_SLEEPDEP);
-	cm_write_mod_reg(prcm_context.usbhost_cm_sleepdep,
-				OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
-	cm_write_mod_reg(prcm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
-					OMAP3_CM_CLKOUT_CTRL_OFFSET);
-	prm_write_mod_reg(prcm_context.prm_clkout_ctrl, OMAP3430_CCR_MOD,
-					OMAP3_PRM_CLKOUT_CTRL_OFFSET);
-	prm_write_mod_reg(prcm_context.sgx_pm_wkdep, OMAP3430ES2_SGX_MOD,
-					PM_WKDEP);
-	prm_write_mod_reg(prcm_context.dss_pm_wkdep, OMAP3430_DSS_MOD,
-					PM_WKDEP);
-	prm_write_mod_reg(prcm_context.cam_pm_wkdep, OMAP3430_CAM_MOD,
-					PM_WKDEP);
-	prm_write_mod_reg(prcm_context.per_pm_wkdep, OMAP3430_PER_MOD,
-					PM_WKDEP);
-	prm_write_mod_reg(prcm_context.neon_pm_wkdep, OMAP3430_NEON_MOD,
-					PM_WKDEP);
-	prm_write_mod_reg(prcm_context.usbhost_pm_wkdep,
-					OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
-	prm_write_mod_reg(prcm_context.core_pm_mpugrpsel1, CORE_MOD,
-					OMAP3430_PM_MPUGRPSEL1);
-	prm_write_mod_reg(prcm_context.iva2_pm_ivagrpsel1, OMAP3430_IVA2_MOD,
-					OMAP3430_PM_IVAGRPSEL1);
-	prm_write_mod_reg(prcm_context.core_pm_mpugrpsel3, CORE_MOD,
-					OMAP3430ES2_PM_MPUGRPSEL3);
-	prm_write_mod_reg(prcm_context.core_pm_ivagrpsel3, CORE_MOD,
-					OMAP3430ES2_PM_IVAGRPSEL3);
-	prm_write_mod_reg(prcm_context.wkup_pm_mpugrpsel, WKUP_MOD,
-					OMAP3430_PM_MPUGRPSEL);
-	prm_write_mod_reg(prcm_context.wkup_pm_ivagrpsel, WKUP_MOD,
-					OMAP3430_PM_IVAGRPSEL);
-	prm_write_mod_reg(prcm_context.per_pm_mpugrpsel, OMAP3430_PER_MOD,
-					OMAP3430_PM_MPUGRPSEL);
-	prm_write_mod_reg(prcm_context.per_pm_ivagrpsel, OMAP3430_PER_MOD,
-					 OMAP3430_PM_IVAGRPSEL);
-	prm_write_mod_reg(prcm_context.wkup_pm_wken, WKUP_MOD, PM_WKEN);
-	return;
-}
-#endif
diff --git a/arch/arm/mach-omap2/prcm44xx.h b/arch/arm/mach-omap2/prcm44xx.h
new file mode 100644
index 00000000000..7334ffb9d2c
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm44xx.h
@@ -0,0 +1,42 @@
+/*
+ * OMAP4 PRCM definitions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains macros and functions that are common to all of
+ * the PRM/CM/PRCM blocks on the OMAP4 devices: PRM, CM1, CM2,
+ * PRCM_MPU, SCRM
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRCM44XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRCM44XX_H
+
+/*
+ * OMAP4 PRCM partition IDs
+ *
+ * The numbers and order are arbitrary, but 0 is reserved for the
+ * 'invalid' partition in case someone forgets to add a
+ * .prcm_partition field.
+ */
+#define OMAP4430_INVALID_PRCM_PARTITION		0
+#define OMAP4430_PRM_PARTITION			1
+#define OMAP4430_CM1_PARTITION			2
+#define OMAP4430_CM2_PARTITION			3
+#define OMAP4430_SCRM_PARTITION			4
+#define OMAP4430_PRCM_MPU_PARTITION		5
+
+/*
+ * OMAP4_MAX_PRCM_PARTITIONS: set to the highest value of the PRCM partition
+ * IDs, plus one
+ */
+#define OMAP4_MAX_PRCM_PARTITIONS		6
+
+
+#endif
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.c b/arch/arm/mach-omap2/prcm_mpu44xx.c
new file mode 100644
index 00000000000..171fe171a74
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.c
@@ -0,0 +1,45 @@
+/*
+ * OMAP4 PRCM_MPU module functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "prcm_mpu44xx.h"
+#include "cm-regbits-44xx.h"
+
+/* PRCM_MPU low-level functions */
+
+u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 reg)
+{
+	return __raw_readl(OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
+}
+
+void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 reg)
+{
+	__raw_writel(val, OMAP44XX_PRCM_MPU_REGADDR(inst, reg));
+}
+
+u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
+{
+	u32 v;
+
+	v = omap4_prcm_mpu_read_inst_reg(inst, reg);
+	v &= ~mask;
+	v |= bits;
+	omap4_prcm_mpu_write_inst_reg(v, inst, reg);
+
+	return v;
+}
diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h
new file mode 100644
index 00000000000..729a644ce85
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm_mpu44xx.h
@@ -0,0 +1,104 @@
+/*
+ * OMAP44xx PRCM MPU instance offset macros
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX",
+ *     or "OMAP4430".
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRCM_MPU44XX_H
+
+#define OMAP4430_PRCM_MPU_BASE			0x48243000
+
+#define OMAP44XX_PRCM_MPU_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE + (inst) + (reg))
+
+/* PRCM_MPU instances */
+
+#define OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_INST	0x0000
+#define OMAP4430_PRCM_MPU_DEVICE_PRM_INST	0x0200
+#define OMAP4430_PRCM_MPU_CPU0_INST		0x0400
+#define OMAP4430_PRCM_MPU_CPU1_INST		0x0800
+
+/* PRCM_MPU clockdomain register offsets (from instance start) */
+#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS	0x0000
+#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS	0x0000
+
+
+/*
+ * PRCM_MPU
+ *
+ * The PRCM_MPU is a local PRCM inside the MPU subsystem. For the PRCM (global)
+ * point of view the PRCM_MPU is a single entity. It shares the same
+ * programming model as the global PRCM and thus can be assimilate as two new
+ * MOD inside the PRCM
+ */
+
+/* PRCM_MPU.OCP_SOCKET_PRCM register offsets */
+#define OMAP4_REVISION_PRCM_OFFSET			0x0000
+#define OMAP4430_REVISION_PRCM				OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_INST, 0x0000)
+
+/* PRCM_MPU.DEVICE_PRM register offsets */
+#define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET			0x0000
+#define OMAP4430_PRCM_MPU_PRM_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_INST, 0x0000)
+#define OMAP4_PRCM_MPU_PRM_PSCON_COUNT_OFFSET		0x0004
+#define OMAP4430_PRCM_MPU_PRM_PSCON_COUNT		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_INST, 0x0004)
+
+/* PRCM_MPU.CPU0 register offsets */
+#define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET			0x0000
+#define OMAP4430_PM_CPU0_PWRSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0000)
+#define OMAP4_PM_CPU0_PWRSTST_OFFSET			0x0004
+#define OMAP4430_PM_CPU0_PWRSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0004)
+#define OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET		0x0008
+#define OMAP4430_RM_CPU0_CPU0_CONTEXT			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0008)
+#define OMAP4_RM_CPU0_CPU0_RSTCTRL_OFFSET		0x000c
+#define OMAP4430_RM_CPU0_CPU0_RSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x000c)
+#define OMAP4_RM_CPU0_CPU0_RSTST_OFFSET			0x0010
+#define OMAP4430_RM_CPU0_CPU0_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0010)
+#define OMAP4_CM_CPU0_CPU0_CLKCTRL_OFFSET		0x0014
+#define OMAP4430_CM_CPU0_CPU0_CLKCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0014)
+#define OMAP4_CM_CPU0_CLKSTCTRL_OFFSET			0x0018
+#define OMAP4430_CM_CPU0_CLKSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0018)
+
+/* PRCM_MPU.CPU1 register offsets */
+#define OMAP4_PM_CPU1_PWRSTCTRL_OFFSET			0x0000
+#define OMAP4430_PM_CPU1_PWRSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0000)
+#define OMAP4_PM_CPU1_PWRSTST_OFFSET			0x0004
+#define OMAP4430_PM_CPU1_PWRSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0004)
+#define OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET		0x0008
+#define OMAP4430_RM_CPU1_CPU1_CONTEXT			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0008)
+#define OMAP4_RM_CPU1_CPU1_RSTCTRL_OFFSET		0x000c
+#define OMAP4430_RM_CPU1_CPU1_RSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x000c)
+#define OMAP4_RM_CPU1_CPU1_RSTST_OFFSET			0x0010
+#define OMAP4430_RM_CPU1_CPU1_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0010)
+#define OMAP4_CM_CPU1_CPU1_CLKCTRL_OFFSET		0x0014
+#define OMAP4430_CM_CPU1_CPU1_CLKCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0014)
+#define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET			0x0018
+#define OMAP4430_CM_CPU1_CLKSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0018)
+
+/* Function prototypes */
+# ifndef __ASSEMBLER__
+extern u32 omap4_prcm_mpu_read_inst_reg(s16 inst, u16 idx);
+extern void omap4_prcm_mpu_write_inst_reg(u32 val, s16 inst, u16 idx);
+extern u32 omap4_prcm_mpu_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst,
+					    s16 idx);
+# endif
+
+#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
index 0b188ffa710..6ac966103f3 100644
--- a/arch/arm/mach-omap2/prm-regbits-24xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -14,7 +14,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 
 /* Bits shared between registers */
 
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 9e63cb743a9..64c087af6a8 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -1,6 +1,3 @@
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
-
 /*
  * OMAP3430 Power/Reset Management register bits
  *
@@ -13,8 +10,11 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
+
 
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 
 /* Shared register bits */
 
@@ -101,8 +101,11 @@
 #define OMAP3430_GRPSEL_MCSPI3_MASK			(1 << 20)
 #define OMAP3430_GRPSEL_MCSPI2_MASK			(1 << 19)
 #define OMAP3430_GRPSEL_MCSPI1_MASK			(1 << 18)
+#define OMAP3430_GRPSEL_I2C3_SHIFT			17
 #define OMAP3430_GRPSEL_I2C3_MASK			(1 << 17)
+#define OMAP3430_GRPSEL_I2C2_SHIFT			16
 #define OMAP3430_GRPSEL_I2C2_MASK			(1 << 16)
+#define OMAP3430_GRPSEL_I2C1_SHIFT			15
 #define OMAP3430_GRPSEL_I2C1_MASK			(1 << 15)
 #define OMAP3430_GRPSEL_UART2_MASK			(1 << 14)
 #define OMAP3430_GRPSEL_UART1_MASK			(1 << 13)
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index 25b19b61017..6d2776f6fc0 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -22,8 +22,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
 #define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
 
-#include "prm.h"
-
 
 /*
  * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 7be040b2fda..39d562169d1 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -1,321 +1,20 @@
-#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H
-#define __ARCH_ARM_MACH_OMAP2_PRM_H
-
 /*
- * OMAP2/3 Power/Reset Management (PRM) register definitions
+ * OMAP2/3/4 Power/Reset Management (PRM) bitfield definitions
  *
  * Copyright (C) 2007-2009 Texas Instruments, Inc.
  * Copyright (C) 2010 Nokia Corporation
  *
- * Written by Paul Walmsley
+ * Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_H
 
 #include "prcm-common.h"
 
-#define OMAP2420_PRM_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
-#define OMAP2430_PRM_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
-#define OMAP34XX_PRM_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-#define OMAP44XX_PRM_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
-#define OMAP44XX_PRCM_MPU_REGADDR(module, reg)				\
-		OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE + (module) + (reg))
-
-#include "prm44xx.h"
-
-/*
- * Architecture-specific global PRM registers
- * Use __raw_{read,write}l() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * PRCM_* on 24xx, and PRM_* on 34xx.  (The exceptions are the
- * IRQSTATUS and IRQENABLE bits.)
- *
- */
-
-#define OMAP2_PRCM_REVISION_OFFSET	0x0000
-#define OMAP2420_PRCM_REVISION		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2_PRCM_SYSCONFIG_OFFSET	0x0010
-#define OMAP2420_PRCM_SYSCONFIG		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET	0x0018
-#define OMAP2420_PRCM_IRQSTATUS_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET	0x001c
-#define OMAP2420_PRCM_IRQENABLE_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2_PRCM_VOLTCTRL_OFFSET	0x0050
-#define OMAP2420_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2_PRCM_VOLTST_OFFSET	0x0054
-#define OMAP2420_PRCM_VOLTST		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET	0x0060
-#define OMAP2420_PRCM_CLKSRC_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET	0x0070
-#define OMAP2420_PRCM_CLKOUT_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET	0x0078
-#define OMAP2420_PRCM_CLKEMUL_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET	0x0080
-#define OMAP2420_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET	0x0084
-#define OMAP2420_PRCM_CLKCFG_STATUS	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2_PRCM_VOLTSETUP_OFFSET	0x0090
-#define OMAP2420_PRCM_VOLTSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2_PRCM_CLKSSETUP_OFFSET	0x0094
-#define OMAP2420_PRCM_CLKSSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2_PRCM_POLCTRL_OFFSET	0x0098
-#define OMAP2420_PRCM_POLCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP2430_PRCM_REVISION		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP2430_PRCM_SYSCONFIG		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP2430_PRCM_IRQSTATUS_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP2430_PRCM_IRQENABLE_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP2430_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
-#define OMAP2430_PRCM_VOLTST		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP2430_PRCM_CLKSRC_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP2430_PRCM_CLKOUT_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP2430_PRCM_CLKEMUL_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP2430_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP2430_PRCM_CLKCFG_STATUS	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP2430_PRCM_VOLTSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP2430_PRCM_CLKSSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP2430_PRCM_POLCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP3_PRM_REVISION_OFFSET	0x0004
-#define OMAP3430_PRM_REVISION		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3_PRM_SYSCONFIG_OFFSET	0x0014
-#define OMAP3430_PRM_SYSCONFIG		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET	0x0018
-#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3_PRM_IRQENABLE_MPU_OFFSET	0x001c
-#define OMAP3430_PRM_IRQENABLE_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3_PRM_VC_SMPS_SA_OFFSET	0x0020
-#define OMAP3430_PRM_VC_SMPS_SA		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET	0x0024
-#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET	0x0028
-#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET	0x002c
-#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET	0x0030
-#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3_PRM_VC_CH_CONF_OFFSET	0x0034
-#define OMAP3430_PRM_VC_CH_CONF		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3_PRM_VC_I2C_CFG_OFFSET	0x0038
-#define OMAP3430_PRM_VC_I2C_CFG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET	0x003c
-#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3_PRM_RSTCTRL_OFFSET	0x0050
-#define OMAP3430_PRM_RSTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3_PRM_RSTTIME_OFFSET	0x0054
-#define OMAP3430_PRM_RSTTIME		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3_PRM_RSTST_OFFSET	0x0058
-#define OMAP3430_PRM_RSTST		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3_PRM_VOLTCTRL_OFFSET	0x0060
-#define OMAP3430_PRM_VOLTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3_PRM_SRAM_PCHARGE_OFFSET	0x0064
-#define OMAP3430_PRM_SRAM_PCHARGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3_PRM_CLKSRC_CTRL_OFFSET	0x0070
-#define OMAP3430_PRM_CLKSRC_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3_PRM_VOLTSETUP1_OFFSET	0x0090
-#define OMAP3430_PRM_VOLTSETUP1		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3_PRM_VOLTOFFSET_OFFSET	0x0094
-#define OMAP3430_PRM_VOLTOFFSET		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3_PRM_CLKSETUP_OFFSET	0x0098
-#define OMAP3430_PRM_CLKSETUP		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3_PRM_POLCTRL_OFFSET	0x009c
-#define OMAP3430_PRM_POLCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3_PRM_VOLTSETUP2_OFFSET	0x00a0
-#define OMAP3430_PRM_VOLTSETUP2		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3_PRM_VP1_CONFIG_OFFSET	0x00b0
-#define OMAP3430_PRM_VP1_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET	0x00b4
-#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET	0x00b8
-#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3_PRM_VP1_VLIMITTO_OFFSET	0x00bc
-#define OMAP3430_PRM_VP1_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3_PRM_VP1_VOLTAGE_OFFSET	0x00c0
-#define OMAP3430_PRM_VP1_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3_PRM_VP1_STATUS_OFFSET	0x00c4
-#define OMAP3430_PRM_VP1_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3_PRM_VP2_CONFIG_OFFSET	0x00d0
-#define OMAP3430_PRM_VP2_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET	0x00d4
-#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET	0x00d8
-#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3_PRM_VP2_VLIMITTO_OFFSET	0x00dc
-#define OMAP3430_PRM_VP2_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3_PRM_VP2_VOLTAGE_OFFSET	0x00e0
-#define OMAP3430_PRM_VP2_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3_PRM_VP2_STATUS_OFFSET	0x00e4
-#define OMAP3430_PRM_VP2_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3_PRM_CLKSEL_OFFSET	0x0040
-#define OMAP3430_PRM_CLKSEL		OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3_PRM_CLKOUT_CTRL_OFFSET	0x0070
-#define OMAP3430_PRM_CLKOUT_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
-
-/*
- * Module specific PRM registers from PRM_BASE + domain offset
- *
- * Use prm_{read,write}_mod_reg() with these registers.
- *
- * With a few exceptions, these are the register names beginning with
- * {PM,RM}_* on both architectures.  (The exceptions are the IRQSTATUS
- * and IRQENABLE bits.)
- *
- */
-
-/* Registers appearing on both 24xx and 34xx */
-
-#define OMAP2_RM_RSTCTRL				0x0050
-#define OMAP2_RM_RSTTIME				0x0054
-#define OMAP2_RM_RSTST					0x0058
-#define OMAP2_PM_PWSTCTRL				0x00e0
-#define OMAP2_PM_PWSTST					0x00e4
-
-#define PM_WKEN						0x00a0
-#define PM_WKEN1					PM_WKEN
-#define PM_WKST						0x00b0
-#define PM_WKST1					PM_WKST
-#define PM_WKDEP					0x00c8
-#define PM_EVGENCTRL					0x00d4
-#define PM_EVGENONTIM					0x00d8
-#define PM_EVGENOFFTIM					0x00dc
-
-/* Omap2 specific registers */
-#define OMAP24XX_PM_WKEN2				0x00a4
-#define OMAP24XX_PM_WKST2				0x00b4
-
-#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
-#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
-#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
-#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
-
-/* Omap3 specific registers */
-#define OMAP3430ES2_PM_WKEN3				0x00f0
-#define OMAP3430ES2_PM_WKST3				0x00b8
-
-#define OMAP3430_PM_MPUGRPSEL				0x00a4
-#define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
-#define OMAP3430ES2_PM_MPUGRPSEL3			0x00f8
-
-#define OMAP3430_PM_IVAGRPSEL				0x00a8
-#define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
-#define OMAP3430ES2_PM_IVAGRPSEL3			0x00f4
-
-#define OMAP3430_PM_PREPWSTST				0x00e8
-
-#define OMAP3430_PRM_IRQSTATUS_IVA2			0x00f8
-#define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
-
-/* Omap4 specific registers */
-#define OMAP4_RM_RSTCTRL				0x0000
-#define OMAP4_RM_RSTTIME				0x0004
-#define OMAP4_RM_RSTST					0x0008
-#define OMAP4_PM_PWSTCTRL				0x0000
-#define OMAP4_PM_PWSTST					0x0004
-
-
-#ifndef __ASSEMBLER__
-
-/* Power/reset management domain register get/set */
-extern u32 prm_read_mod_reg(s16 module, u16 idx);
-extern void prm_write_mod_reg(u32 val, s16 module, u16 idx);
-extern u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-
-/* Read-modify-write bits in a PRM register (by domain) */
-static inline u32 prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return prm_rmw_mod_reg_bits(bits, bits, module, idx);
-}
-
-static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
-{
-	return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
-}
-
-/* These omap2_ PRM functions apply to both OMAP2 and 3 */
-int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
-int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
-int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
-
-int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift);
-int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift);
-int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift);
-
-#endif
-
-/*
- * Bits common to specific registers
- *
- * The 3430 register and bit names are generally used,
- * since they tend to make more sense
- */
-
-/* PM_EVGENONTIM_MPU */
-/* Named PM_EVEGENONTIM_MPU on the 24XX */
-#define OMAP_ONTIMEVAL_SHIFT				0
-#define OMAP_ONTIMEVAL_MASK				(0xffffffff << 0)
-
-/* PM_EVGENOFFTIM_MPU */
-/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
-#define OMAP_OFFTIMEVAL_SHIFT				0
-#define OMAP_OFFTIMEVAL_MASK				(0xffffffff << 0)
-
-/* PRM_CLKSETUP and PRCM_VOLTSETUP */
-/* Named PRCM_CLKSSETUP on the 24XX */
-#define OMAP_SETUP_TIME_SHIFT				0
-#define OMAP_SETUP_TIME_MASK				(0xffff << 0)
-
-/* PRM_CLKSRC_CTRL */
-/* Named PRCM_CLKSRC_CTRL on the 24XX */
-#define OMAP_SYSCLKDIV_SHIFT				6
-#define OMAP_SYSCLKDIV_MASK				(0x3 << 6)
-#define OMAP_AUTOEXTCLKMODE_SHIFT			3
-#define OMAP_AUTOEXTCLKMODE_MASK			(0x3 << 3)
-#define OMAP_SYSCLKSEL_SHIFT				0
-#define OMAP_SYSCLKSEL_MASK				(0x3 << 0)
-
-/* PM_EVGENCTRL_MPU */
-#define OMAP_OFFLOADMODE_SHIFT				3
-#define OMAP_OFFLOADMODE_MASK				(0x3 << 3)
-#define OMAP_ONLOADMODE_SHIFT				1
-#define OMAP_ONLOADMODE_MASK				(0x3 << 1)
-#define OMAP_ENABLE_MASK				(1 << 0)
-
-/* PRM_RSTTIME */
-/* Named RM_RSTTIME_WKUP on the 24xx */
-#define OMAP_RSTTIME2_SHIFT				8
-#define OMAP_RSTTIME2_MASK				(0x1f << 8)
-#define OMAP_RSTTIME1_SHIFT				0
-#define OMAP_RSTTIME1_MASK				(0xff << 0)
-
-/* PRM_RSTCTRL */
-/* Named RM_RSTCTRL_WKUP on the 24xx */
-/* 2420 calls RST_DPLL3 'RST_DPLL' */
-#define OMAP_RST_DPLL3_MASK				(1 << 2)
-#define OMAP_RST_GS_MASK				(1 << 1)
-
-
-/*
- * Bits common to module-shared registers
- *
- * Not all registers of a particular type support all of these bits -
- * check TRM if you are unsure
- */
-
 /*
  * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
  *
@@ -341,59 +40,6 @@ int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift);
 #define OMAP_POWERSTATEST_MASK				(0x3 << 0)
 
 /*
- * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
- *	 called 'COREWKUP_RST'
- *
- * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
- *	 RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
- */
-#define OMAP_COREDOMAINWKUP_RST_MASK			(1 << 3)
-
-/*
- * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
- *
- * 2430: RM_RSTST_MDM
- *
- * 3430: RM_RSTST_CORE, RM_RSTST_EMU
- */
-#define OMAP_DOMAINWKUP_RST_MASK			(1 << 2)
-
-/*
- * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
- *	 On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
- *
- * 2430: RM_RSTST_MDM
- *
- * 3430: RM_RSTST_CORE, RM_RSTST_EMU
- */
-#define OMAP_GLOBALWARM_RST_MASK			(1 << 1)
-#define OMAP_GLOBALCOLD_RST_MASK			(1 << 0)
-
-/*
- * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
- *	 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
- *
- * 2430: PM_WKDEP_MDM
- *
- * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
- *	 PM_WKDEP_PER
- */
-#define OMAP_EN_WKUP_SHIFT				4
-#define OMAP_EN_WKUP_MASK				(1 << 4)
-
-/*
- * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
- *	 PM_PWSTCTRL_DSP
- *
- * 2430: PM_PWSTCTRL_MDM
- *
- * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
- *	 PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
- *	 PM_PWSTCTRL_NEON
- */
-#define OMAP_LOGICRETSTATE_MASK				(1 << 2)
-
-/*
  * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
  *       PM_PWSTCTRL_DSP, PM_PWSTST_MPU
  *
@@ -407,11 +53,4 @@ int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift);
 #define OMAP_POWERSTATE_MASK				(0x3 << 0)
 
 
-/*
- * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
- * submodule to exit hardreset
- */
-#define MAX_MODULE_HARDRESET_WAIT		10000
-
-
 #endif
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 421771eee45..ec0362574b5 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -12,18 +12,65 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/io.h>
 
 #include <plat/common.h>
 #include <plat/cpu.h>
 #include <plat/prcm.h>
 
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-34xx.h"
 
+u32 omap2_prm_read_mod_reg(s16 module, u16 idx)
+{
+	return __raw_readl(prm_base + module + idx);
+}
+
+void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx)
+{
+	__raw_writel(val, prm_base + module + idx);
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
+{
+	u32 v;
+
+	v = omap2_prm_read_mod_reg(module, idx);
+	v &= ~mask;
+	v |= bits;
+	omap2_prm_write_mod_reg(v, module, idx);
+
+	return v;
+}
+
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
+{
+	u32 v;
+
+	v = omap2_prm_read_mod_reg(domain, idx);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	return omap2_prm_rmw_mod_reg_bits(bits, bits, module, idx);
+}
+
+u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
+{
+	return omap2_prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
+}
+
+
 /**
  * omap2_prm_is_hardreset_asserted - read the HW reset line state of
  * submodules contained in the hwmod module
@@ -39,7 +86,7 @@ int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
 	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
 		return -EINVAL;
 
-	return prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
+	return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
 				       (1 << shift));
 }
 
@@ -63,7 +110,7 @@ int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
 		return -EINVAL;
 
 	mask = 1 << shift;
-	prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
+	omap2_prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
 
 	return 0;
 }
@@ -93,18 +140,17 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
 	mask = 1 << shift;
 
 	/* Check the current status to avoid de-asserting the line twice */
-	if (prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0)
+	if (omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0)
 		return -EEXIST;
 
 	/* Clear the reset status by writing 1 to the status bit */
-	prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST);
+	omap2_prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST);
 	/* de-assert the reset control line */
-	prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL);
+	omap2_prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL);
 	/* wait the status to be set */
-	omap_test_timeout(prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
+	omap_test_timeout(omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
 						  mask),
 			  MAX_MODULE_HARDRESET_WAIT, c);
 
 	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
 }
-
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h
new file mode 100644
index 00000000000..53d44f6e373
--- /dev/null
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h
@@ -0,0 +1,367 @@
+/*
+ * OMAP2/3 Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The PRM hardware modules on the OMAP2/3 are quite similar to each
+ * other.  The PRM on OMAP4 has a new register layout, and is handled
+ * in a separate file.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_3XXX_H
+
+#include "prcm-common.h"
+#include "prm.h"
+
+#define OMAP2420_PRM_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+#define OMAP2430_PRM_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+#define OMAP34XX_PRM_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+
+
+/*
+ * OMAP2-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRCM_* on 24xx.  (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ *
+ */
+
+#define OMAP2_PRCM_REVISION_OFFSET	0x0000
+#define OMAP2420_PRCM_REVISION		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET	0x0010
+#define OMAP2420_PRCM_SYSCONFIG		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU	OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET	0x0050
+#define OMAP2420_PRCM_VOLTCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET	0x0054
+#define OMAP2420_PRCM_VOLTST		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET	0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET	0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET	0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET	0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS	OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET	0x0090
+#define OMAP2420_PRCM_VOLTSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET	0x0094
+#define OMAP2420_PRCM_CLKSSETUP		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET	0x0098
+#define OMAP2420_PRCM_POLCTRL		OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU	OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS	OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL		OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+/*
+ * OMAP3-specific global PRM registers
+ * Use __raw_{read,write}l() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRM_* on 34xx.  (The exceptions are the IRQSTATUS and IRQENABLE
+ * bits.)
+ */
+
+#define OMAP3_PRM_REVISION_OFFSET	0x0004
+#define OMAP3430_PRM_REVISION		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET	0x0014
+#define OMAP3430_PRM_SYSCONFIG		OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET	0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET	0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU	OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET	0x0020
+#define OMAP3430_PRM_VC_SMPS_SA		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET	0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET	0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET	0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET	0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET	0x0034
+#define OMAP3430_PRM_VC_CH_CONF		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET	0x0038
+#define OMAP3430_PRM_VC_I2C_CFG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET	0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET	0x0050
+#define OMAP3430_PRM_RSTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET	0x0054
+#define OMAP3430_PRM_RSTTIME		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET	0x0058
+#define OMAP3430_PRM_RSTST		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET	0x0060
+#define OMAP3430_PRM_VOLTCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET	0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET	0x0090
+#define OMAP3430_PRM_VOLTSETUP1		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET	0x0094
+#define OMAP3430_PRM_VOLTOFFSET		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET	0x0098
+#define OMAP3430_PRM_CLKSETUP		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET	0x009c
+#define OMAP3430_PRM_POLCTRL		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET	0x00a0
+#define OMAP3430_PRM_VOLTSETUP2		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET	0x00b0
+#define OMAP3430_PRM_VP1_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET	0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET	0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET	0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET	0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET	0x00c4
+#define OMAP3430_PRM_VP1_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET	0x00d0
+#define OMAP3430_PRM_VP2_CONFIG		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET	0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET	0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET	0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET	0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE	OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET	0x00e4
+#define OMAP3430_PRM_VP2_STATUS		OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET	0x0040
+#define OMAP3430_PRM_CLKSEL		OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET	0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL	OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific PRM register offsets from PRM_BASE + domain offset
+ *
+ * Use prm_{read,write}_mod_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * {PM,RM}_* on both OMAP2/3 SoC families..  (The exceptions are the
+ * IRQSTATUS and IRQENABLE bits.)
+ */
+
+/* Register offsets appearing on both OMAP2 and OMAP3 */
+
+#define OMAP2_RM_RSTCTRL				0x0050
+#define OMAP2_RM_RSTTIME				0x0054
+#define OMAP2_RM_RSTST					0x0058
+#define OMAP2_PM_PWSTCTRL				0x00e0
+#define OMAP2_PM_PWSTST					0x00e4
+
+#define PM_WKEN						0x00a0
+#define PM_WKEN1					PM_WKEN
+#define PM_WKST						0x00b0
+#define PM_WKST1					PM_WKST
+#define PM_WKDEP					0x00c8
+#define PM_EVGENCTRL					0x00d4
+#define PM_EVGENONTIM					0x00d8
+#define PM_EVGENOFFTIM					0x00dc
+
+/* OMAP2xxx specific register offsets */
+#define OMAP24XX_PM_WKEN2				0x00a4
+#define OMAP24XX_PM_WKST2				0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
+
+/* OMAP3 specific register offsets */
+#define OMAP3430ES2_PM_WKEN3				0x00f0
+#define OMAP3430ES2_PM_WKST3				0x00b8
+
+#define OMAP3430_PM_MPUGRPSEL				0x00a4
+#define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3			0x00f8
+
+#define OMAP3430_PM_IVAGRPSEL				0x00a8
+#define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3			0x00f4
+
+#define OMAP3430_PM_PREPWSTST				0x00e8
+
+#define OMAP3430_PRM_IRQSTATUS_IVA2			0x00f8
+#define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
+
+
+#ifndef __ASSEMBLER__
+
+/* Power/reset management domain register get/set */
+extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx);
+extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx);
+extern u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
+extern u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx);
+extern u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx);
+extern u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+
+/* These omap2_ PRM functions apply to both OMAP2 and 3 */
+extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
+extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
+extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
+
+#endif
+
+/*
+ * Bits common to specific registers
+ *
+ * The 3430 register and bit names are generally used,
+ * since they tend to make more sense
+ */
+
+/* PM_EVGENONTIM_MPU */
+/* Named PM_EVEGENONTIM_MPU on the 24XX */
+#define OMAP_ONTIMEVAL_SHIFT				0
+#define OMAP_ONTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PM_EVGENOFFTIM_MPU */
+/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
+#define OMAP_OFFTIMEVAL_SHIFT				0
+#define OMAP_OFFTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PRM_CLKSETUP and PRCM_VOLTSETUP */
+/* Named PRCM_CLKSSETUP on the 24XX */
+#define OMAP_SETUP_TIME_SHIFT				0
+#define OMAP_SETUP_TIME_MASK				(0xffff << 0)
+
+/* PRM_CLKSRC_CTRL */
+/* Named PRCM_CLKSRC_CTRL on the 24XX */
+#define OMAP_SYSCLKDIV_SHIFT				6
+#define OMAP_SYSCLKDIV_MASK				(0x3 << 6)
+#define OMAP_AUTOEXTCLKMODE_SHIFT			3
+#define OMAP_AUTOEXTCLKMODE_MASK			(0x3 << 3)
+#define OMAP_SYSCLKSEL_SHIFT				0
+#define OMAP_SYSCLKSEL_MASK				(0x3 << 0)
+
+/* PM_EVGENCTRL_MPU */
+#define OMAP_OFFLOADMODE_SHIFT				3
+#define OMAP_OFFLOADMODE_MASK				(0x3 << 3)
+#define OMAP_ONLOADMODE_SHIFT				1
+#define OMAP_ONLOADMODE_MASK				(0x3 << 1)
+#define OMAP_ENABLE_MASK				(1 << 0)
+
+/* PRM_RSTTIME */
+/* Named RM_RSTTIME_WKUP on the 24xx */
+#define OMAP_RSTTIME2_SHIFT				8
+#define OMAP_RSTTIME2_MASK				(0x1f << 8)
+#define OMAP_RSTTIME1_SHIFT				0
+#define OMAP_RSTTIME1_MASK				(0xff << 0)
+
+/* PRM_RSTCTRL */
+/* Named RM_RSTCTRL_WKUP on the 24xx */
+/* 2420 calls RST_DPLL3 'RST_DPLL' */
+#define OMAP_RST_DPLL3_MASK				(1 << 2)
+#define OMAP_RST_GS_MASK				(1 << 1)
+
+
+/*
+ * Bits common to module-shared registers
+ *
+ * Not all registers of a particular type support all of these bits -
+ * check TRM if you are unsure
+ */
+
+/*
+ * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
+ *	 called 'COREWKUP_RST'
+ *
+ * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
+ *	 RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
+ */
+#define OMAP_COREDOMAINWKUP_RST_MASK			(1 << 3)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_DOMAINWKUP_RST_MASK			(1 << 2)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
+ *	 On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_GLOBALWARM_RST_MASK			(1 << 1)
+#define OMAP_GLOBALCOLD_RST_MASK			(1 << 0)
+
+/*
+ * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
+ *	 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
+ *
+ * 2430: PM_WKDEP_MDM
+ *
+ * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
+ *	 PM_WKDEP_PER
+ */
+#define OMAP_EN_WKUP_SHIFT				4
+#define OMAP_EN_WKUP_MASK				(1 << 4)
+
+/*
+ * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *	 PM_PWSTCTRL_DSP
+ *
+ * 2430: PM_PWSTCTRL_MDM
+ *
+ * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *	 PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
+ *	 PM_PWSTCTRL_NEON
+ */
+#define OMAP_LOGICRETSTATE_MASK				(1 << 2)
+
+
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT		10000
+
+
+#endif
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index a1ff918d9be..a2a04bfa962 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -15,12 +15,13 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/io.h>
 
 #include <plat/common.h>
 #include <plat/cpu.h>
 #include <plat/prcm.h>
 
-#include "prm.h"
+#include "prm44xx.h"
 #include "prm-regbits-44xx.h"
 
 /*
@@ -29,6 +30,70 @@
  */
 #define OMAP4_RST_CTRL_ST_OFFSET		4
 
+/* PRM low-level functions */
+
+/* Read a register in a CM/PRM instance in the PRM module */
+u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
+{
+	return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg));
+}
+
+/* Write into a register in a CM/PRM instance in the PRM module */
+void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
+{
+	__raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg));
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
+{
+	u32 v;
+
+	v = omap4_prm_read_inst_reg(inst, reg);
+	v &= ~mask;
+	v |= bits;
+	omap4_prm_write_inst_reg(v, inst, reg);
+
+	return v;
+}
+
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+/* XXX deprecated */
+u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
+{
+	u32 v;
+
+	v = __raw_readl(reg);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+/* XXX deprecated */
+u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg)
+{
+	u32 v;
+
+	v = __raw_readl(reg);
+	v &= ~mask;
+	v |= bits;
+	__raw_writel(v, reg);
+
+	return v;
+}
+
+u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 reg)
+{
+	return omap4_prm_rmw_inst_reg_bits(bits, bits, inst, reg);
+}
+
+u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 reg)
+{
+	return omap4_prm_rmw_inst_reg_bits(bits, 0x0, inst, reg);
+}
+
 /**
  * omap4_prm_is_hardreset_asserted - read the HW reset line state of
  * submodules contained in the hwmod module
@@ -114,3 +179,17 @@ int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift)
 	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
 }
 
+void omap4_prm_global_warm_sw_reset(void)
+{
+	u32 v;
+
+	v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_RM_RSTCTRL);
+	v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
+	omap4_prm_write_inst_reg(v, OMAP4430_PRM_DEVICE_INST,
+				 OMAP4_RM_RSTCTRL);
+
+	/* OCP barrier */
+	v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_RM_RSTCTRL);
+}
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 59839dbabd8..67a0d3feb3f 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -17,736 +17,762 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
+ *
+ * XXX This file needs to be updated to align on one of "OMAP4", "OMAP44XX",
+ *     or "OMAP4430".
  */
 
 #ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_H
 #define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
 
+#include "prcm-common.h"
+#include "prm.h"
+
+#define OMAP4430_PRM_BASE		0x4a306000
+
+#define OMAP44XX_PRM_REGADDR(inst, reg)				\
+	OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE +	(inst) + (reg))
+
+
+/* PRM instances */
+#define OMAP4430_PRM_OCP_SOCKET_INST	0x0000
+#define OMAP4430_PRM_CKGEN_INST		0x0100
+#define OMAP4430_PRM_MPU_INST		0x0300
+#define OMAP4430_PRM_TESLA_INST		0x0400
+#define OMAP4430_PRM_ABE_INST		0x0500
+#define OMAP4430_PRM_ALWAYS_ON_INST	0x0600
+#define OMAP4430_PRM_CORE_INST		0x0700
+#define OMAP4430_PRM_IVAHD_INST		0x0f00
+#define OMAP4430_PRM_CAM_INST		0x1000
+#define OMAP4430_PRM_DSS_INST		0x1100
+#define OMAP4430_PRM_GFX_INST		0x1200
+#define OMAP4430_PRM_L3INIT_INST		0x1300
+#define OMAP4430_PRM_L4PER_INST		0x1400
+#define OMAP4430_PRM_CEFUSE_INST		0x1600
+#define OMAP4430_PRM_WKUP_INST		0x1700
+#define OMAP4430_PRM_WKUP_CM_INST	0x1800
+#define OMAP4430_PRM_EMU_INST		0x1900
+#define OMAP4430_PRM_EMU_CM_INST		0x1a00
+#define OMAP4430_PRM_DEVICE_INST		0x1b00
+#define OMAP4430_PRM_INSTR_INST		0x1f00
+
+/* PRM clockdomain register offsets (from instance start) */
+#define OMAP4430_PRM_MPU_MPU_CDOFFS		0x0000
+#define OMAP4430_PRM_TESLA_TESLA_CDOFFS		0x0000
+#define OMAP4430_PRM_ABE_ABE_CDOFFS		0x0000
+#define OMAP4430_PRM_CORE_CORE_CDOFFS		0x0000
+#define OMAP4430_PRM_IVAHD_IVAHD_CDOFFS		0x0000
+#define OMAP4430_PRM_CAM_CAM_CDOFFS		0x0000
+#define OMAP4430_PRM_DSS_DSS_CDOFFS		0x0000
+#define OMAP4430_PRM_GFX_GFX_CDOFFS		0x0000
+#define OMAP4430_PRM_L3INIT_L3INIT_CDOFFS	0x0000
+#define OMAP4430_PRM_L4PER_L4PER_CDOFFS		0x0000
+#define OMAP4430_PRM_CEFUSE_CEFUSE_CDOFFS	0x0000
+#define OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS	0x0000
+#define OMAP4430_PRM_EMU_EMU_CDOFFS		0x0000
+#define OMAP4430_PRM_EMU_CM_EMU_CDOFFS		0x0000
+
+/* OMAP4 specific register offsets */
+#define OMAP4_RM_RSTCTRL				0x0000
+#define OMAP4_RM_RSTTIME				0x0004
+#define OMAP4_RM_RSTST					0x0008
+#define OMAP4_PM_PWSTCTRL				0x0000
+#define OMAP4_PM_PWSTST					0x0004
+
 
 /* PRM */
 
 /* PRM.OCP_SOCKET_PRM register offsets */
 #define OMAP4_REVISION_PRM_OFFSET			0x0000
-#define OMAP4430_REVISION_PRM				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4430_REVISION_PRM				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0000)
 #define OMAP4_PRM_IRQSTATUS_MPU_OFFSET			0x0010
-#define OMAP4430_PRM_IRQSTATUS_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0010)
+#define OMAP4430_PRM_IRQSTATUS_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0010)
 #define OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET		0x0014
-#define OMAP4430_PRM_IRQSTATUS_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0014)
+#define OMAP4430_PRM_IRQSTATUS_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0014)
 #define OMAP4_PRM_IRQENABLE_MPU_OFFSET			0x0018
-#define OMAP4430_PRM_IRQENABLE_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0018)
+#define OMAP4430_PRM_IRQENABLE_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0018)
 #define OMAP4_PRM_IRQENABLE_MPU_2_OFFSET		0x001c
-#define OMAP4430_PRM_IRQENABLE_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x001c)
+#define OMAP4430_PRM_IRQENABLE_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x001c)
 #define OMAP4_PRM_IRQSTATUS_DUCATI_OFFSET		0x0020
-#define OMAP4430_PRM_IRQSTATUS_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0020)
+#define OMAP4430_PRM_IRQSTATUS_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0020)
 #define OMAP4_PRM_IRQENABLE_DUCATI_OFFSET		0x0028
-#define OMAP4430_PRM_IRQENABLE_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0028)
+#define OMAP4430_PRM_IRQENABLE_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0028)
 #define OMAP4_PRM_IRQSTATUS_TESLA_OFFSET		0x0030
-#define OMAP4430_PRM_IRQSTATUS_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030)
+#define OMAP4430_PRM_IRQSTATUS_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0030)
 #define OMAP4_PRM_IRQENABLE_TESLA_OFFSET		0x0038
-#define OMAP4430_PRM_IRQENABLE_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038)
+#define OMAP4430_PRM_IRQENABLE_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0038)
 #define OMAP4_CM_PRM_PROFILING_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_PRM_PROFILING_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040)
+#define OMAP4430_CM_PRM_PROFILING_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_INST, 0x0040)
 
 /* PRM.CKGEN_PRM register offsets */
 #define OMAP4_CM_ABE_DSS_SYS_CLKSEL_OFFSET		0x0000
-#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000)
+#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0000)
 #define OMAP4_CM_L4_WKUP_CLKSEL_OFFSET			0x0008
-#define OMAP4430_CM_L4_WKUP_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008)
+#define OMAP4430_CM_L4_WKUP_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0008)
 #define OMAP4_CM_ABE_PLL_REF_CLKSEL_OFFSET		0x000c
-#define OMAP4430_CM_ABE_PLL_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x000c)
+#define OMAP4430_CM_ABE_PLL_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x000c)
 #define OMAP4_CM_SYS_CLKSEL_OFFSET			0x0010
-#define OMAP4430_CM_SYS_CLKSEL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0010)
+#define OMAP4430_CM_SYS_CLKSEL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_INST, 0x0010)
 
 /* PRM.MPU_PRM register offsets */
 #define OMAP4_PM_MPU_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_MPU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0000)
+#define OMAP4430_PM_MPU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0000)
 #define OMAP4_PM_MPU_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_MPU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0004)
+#define OMAP4430_PM_MPU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0004)
 #define OMAP4_RM_MPU_RSTST_OFFSET			0x0014
-#define OMAP4430_RM_MPU_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0014)
+#define OMAP4430_RM_MPU_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0014)
 #define OMAP4_RM_MPU_MPU_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_MPU_MPU_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0024)
+#define OMAP4430_RM_MPU_MPU_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_INST, 0x0024)
 
 /* PRM.TESLA_PRM register offsets */
 #define OMAP4_PM_TESLA_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_TESLA_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0000)
+#define OMAP4430_PM_TESLA_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0000)
 #define OMAP4_PM_TESLA_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_TESLA_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0004)
+#define OMAP4430_PM_TESLA_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0004)
 #define OMAP4_RM_TESLA_RSTCTRL_OFFSET			0x0010
-#define OMAP4430_RM_TESLA_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0010)
+#define OMAP4430_RM_TESLA_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0010)
 #define OMAP4_RM_TESLA_RSTST_OFFSET			0x0014
-#define OMAP4430_RM_TESLA_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0014)
+#define OMAP4430_RM_TESLA_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0014)
 #define OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_TESLA_TESLA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0024)
+#define OMAP4430_RM_TESLA_TESLA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_INST, 0x0024)
 
 /* PRM.ABE_PRM register offsets */
 #define OMAP4_PM_ABE_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_ABE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0000)
+#define OMAP4430_PM_ABE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0000)
 #define OMAP4_PM_ABE_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_ABE_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0004)
+#define OMAP4430_PM_ABE_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0004)
 #define OMAP4_RM_ABE_AESS_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_ABE_AESS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x002c)
+#define OMAP4430_RM_ABE_AESS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x002c)
 #define OMAP4_PM_ABE_PDM_WKDEP_OFFSET			0x0030
-#define OMAP4430_PM_ABE_PDM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0030)
+#define OMAP4430_PM_ABE_PDM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0030)
 #define OMAP4_RM_ABE_PDM_CONTEXT_OFFSET			0x0034
-#define OMAP4430_RM_ABE_PDM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0034)
+#define OMAP4430_RM_ABE_PDM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0034)
 #define OMAP4_PM_ABE_DMIC_WKDEP_OFFSET			0x0038
-#define OMAP4430_PM_ABE_DMIC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0038)
+#define OMAP4430_PM_ABE_DMIC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0038)
 #define OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_ABE_DMIC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x003c)
+#define OMAP4430_RM_ABE_DMIC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x003c)
 #define OMAP4_PM_ABE_MCASP_WKDEP_OFFSET			0x0040
-#define OMAP4430_PM_ABE_MCASP_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0040)
+#define OMAP4430_PM_ABE_MCASP_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0040)
 #define OMAP4_RM_ABE_MCASP_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_ABE_MCASP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0044)
+#define OMAP4430_RM_ABE_MCASP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0044)
 #define OMAP4_PM_ABE_MCBSP1_WKDEP_OFFSET		0x0048
-#define OMAP4430_PM_ABE_MCBSP1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0048)
+#define OMAP4430_PM_ABE_MCBSP1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0048)
 #define OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET		0x004c
-#define OMAP4430_RM_ABE_MCBSP1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x004c)
+#define OMAP4430_RM_ABE_MCBSP1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x004c)
 #define OMAP4_PM_ABE_MCBSP2_WKDEP_OFFSET		0x0050
-#define OMAP4430_PM_ABE_MCBSP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0050)
+#define OMAP4430_PM_ABE_MCBSP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0050)
 #define OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET		0x0054
-#define OMAP4430_RM_ABE_MCBSP2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0054)
+#define OMAP4430_RM_ABE_MCBSP2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0054)
 #define OMAP4_PM_ABE_MCBSP3_WKDEP_OFFSET		0x0058
-#define OMAP4430_PM_ABE_MCBSP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0058)
+#define OMAP4430_PM_ABE_MCBSP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0058)
 #define OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_ABE_MCBSP3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x005c)
+#define OMAP4430_RM_ABE_MCBSP3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x005c)
 #define OMAP4_PM_ABE_SLIMBUS_WKDEP_OFFSET		0x0060
-#define OMAP4430_PM_ABE_SLIMBUS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0060)
+#define OMAP4430_PM_ABE_SLIMBUS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0060)
 #define OMAP4_RM_ABE_SLIMBUS_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0064)
+#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0064)
 #define OMAP4_PM_ABE_TIMER5_WKDEP_OFFSET		0x0068
-#define OMAP4430_PM_ABE_TIMER5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0068)
+#define OMAP4430_PM_ABE_TIMER5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0068)
 #define OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET		0x006c
-#define OMAP4430_RM_ABE_TIMER5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x006c)
+#define OMAP4430_RM_ABE_TIMER5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x006c)
 #define OMAP4_PM_ABE_TIMER6_WKDEP_OFFSET		0x0070
-#define OMAP4430_PM_ABE_TIMER6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0070)
+#define OMAP4430_PM_ABE_TIMER6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0070)
 #define OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET		0x0074
-#define OMAP4430_RM_ABE_TIMER6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0074)
+#define OMAP4430_RM_ABE_TIMER6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0074)
 #define OMAP4_PM_ABE_TIMER7_WKDEP_OFFSET		0x0078
-#define OMAP4430_PM_ABE_TIMER7_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0078)
+#define OMAP4430_PM_ABE_TIMER7_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0078)
 #define OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_ABE_TIMER7_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x007c)
+#define OMAP4430_RM_ABE_TIMER7_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x007c)
 #define OMAP4_PM_ABE_TIMER8_WKDEP_OFFSET		0x0080
-#define OMAP4430_PM_ABE_TIMER8_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0080)
+#define OMAP4430_PM_ABE_TIMER8_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0080)
 #define OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_ABE_TIMER8_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0084)
+#define OMAP4430_RM_ABE_TIMER8_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0084)
 #define OMAP4_PM_ABE_WDT3_WKDEP_OFFSET			0x0088
-#define OMAP4430_PM_ABE_WDT3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0088)
+#define OMAP4430_PM_ABE_WDT3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x0088)
 #define OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET		0x008c
-#define OMAP4430_RM_ABE_WDT3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x008c)
+#define OMAP4430_RM_ABE_WDT3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_INST, 0x008c)
 
 /* PRM.ALWAYS_ON_PRM register offsets */
 #define OMAP4_RM_ALWON_MDMINTC_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0024)
+#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0024)
 #define OMAP4_PM_ALWON_SR_MPU_WKDEP_OFFSET		0x0028
-#define OMAP4430_PM_ALWON_SR_MPU_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4430_PM_ALWON_SR_MPU_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0028)
 #define OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x002c)
+#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x002c)
 #define OMAP4_PM_ALWON_SR_IVA_WKDEP_OFFSET		0x0030
-#define OMAP4430_PM_ALWON_SR_IVA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4430_PM_ALWON_SR_IVA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0030)
 #define OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0034)
+#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0034)
 #define OMAP4_PM_ALWON_SR_CORE_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_ALWON_SR_CORE_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0038)
+#define OMAP4430_PM_ALWON_SR_CORE_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x0038)
 #define OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x003c)
+#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_INST, 0x003c)
 
 /* PRM.CORE_PRM register offsets */
 #define OMAP4_PM_CORE_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_CORE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0000)
+#define OMAP4430_PM_CORE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0000)
 #define OMAP4_PM_CORE_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CORE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0004)
+#define OMAP4430_PM_CORE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0004)
 #define OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_L3_1_L3_1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0024)
+#define OMAP4430_RM_L3_1_L3_1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0024)
 #define OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET		0x0124
-#define OMAP4430_RM_L3_2_L3_2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0124)
+#define OMAP4430_RM_L3_2_L3_2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0124)
 #define OMAP4_RM_L3_2_GPMC_CONTEXT_OFFSET		0x012c
-#define OMAP4430_RM_L3_2_GPMC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x012c)
+#define OMAP4430_RM_L3_2_GPMC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x012c)
 #define OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET		0x0134
-#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0134)
+#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0134)
 #define OMAP4_RM_DUCATI_RSTCTRL_OFFSET			0x0210
-#define OMAP4430_RM_DUCATI_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0210)
+#define OMAP4430_RM_DUCATI_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0210)
 #define OMAP4_RM_DUCATI_RSTST_OFFSET			0x0214
-#define OMAP4430_RM_DUCATI_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0214)
+#define OMAP4430_RM_DUCATI_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0214)
 #define OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET		0x0224
-#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0224)
+#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0224)
 #define OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET		0x0324
-#define OMAP4430_RM_SDMA_SDMA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0324)
+#define OMAP4430_RM_SDMA_SDMA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0324)
 #define OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET		0x0424
-#define OMAP4430_RM_MEMIF_DMM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0424)
+#define OMAP4430_RM_MEMIF_DMM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0424)
 #define OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET		0x042c
-#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x042c)
+#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x042c)
 #define OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET		0x0434
-#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0434)
+#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0434)
 #define OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET		0x043c
-#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x043c)
+#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x043c)
 #define OMAP4_RM_MEMIF_DLL_CONTEXT_OFFSET		0x0444
-#define OMAP4430_RM_MEMIF_DLL_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0444)
+#define OMAP4430_RM_MEMIF_DLL_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0444)
 #define OMAP4_RM_MEMIF_EMIF_H1_CONTEXT_OFFSET		0x0454
-#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0454)
+#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0454)
 #define OMAP4_RM_MEMIF_EMIF_H2_CONTEXT_OFFSET		0x045c
-#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x045c)
+#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x045c)
 #define OMAP4_RM_MEMIF_DLL_H_CONTEXT_OFFSET		0x0464
-#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0464)
+#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0464)
 #define OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET		0x0524
-#define OMAP4430_RM_D2D_SAD2D_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0524)
-#define OMAP4_RM_D2D_MODEM_ICR_CONTEXT_OFFSET		0x052c
-#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x052c)
+#define OMAP4430_RM_D2D_SAD2D_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0524)
+#define OMAP4_RM_D2D_INSTEM_ICR_CONTEXT_OFFSET		0x052c
+#define OMAP4430_RM_D2D_INSTEM_ICR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x052c)
 #define OMAP4_RM_D2D_SAD2D_FW_CONTEXT_OFFSET		0x0534
-#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0534)
+#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0534)
 #define OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET		0x0624
-#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0624)
+#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0624)
 #define OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET		0x062c
-#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x062c)
+#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x062c)
 #define OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET		0x0634
-#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0634)
+#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0634)
 #define OMAP4_RM_L4CFG_SAR_ROM_CONTEXT_OFFSET		0x063c
-#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x063c)
+#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x063c)
 #define OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET		0x0724
-#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0724)
+#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0724)
 #define OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET	0x072c
-#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x072c)
+#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x072c)
 #define OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET		0x0744
-#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0744)
+#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0744)
 
 /* PRM.IVAHD_PRM register offsets */
 #define OMAP4_PM_IVAHD_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_IVAHD_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0000)
+#define OMAP4430_PM_IVAHD_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0000)
 #define OMAP4_PM_IVAHD_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_IVAHD_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0004)
+#define OMAP4430_PM_IVAHD_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0004)
 #define OMAP4_RM_IVAHD_RSTCTRL_OFFSET			0x0010
-#define OMAP4430_RM_IVAHD_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0010)
+#define OMAP4430_RM_IVAHD_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0010)
 #define OMAP4_RM_IVAHD_RSTST_OFFSET			0x0014
-#define OMAP4430_RM_IVAHD_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0014)
+#define OMAP4430_RM_IVAHD_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0014)
 #define OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0024)
+#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x0024)
 #define OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_IVAHD_SL2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x002c)
+#define OMAP4430_RM_IVAHD_SL2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_INST, 0x002c)
 
 /* PRM.CAM_PRM register offsets */
 #define OMAP4_PM_CAM_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_CAM_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0000)
+#define OMAP4430_PM_CAM_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0000)
 #define OMAP4_PM_CAM_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CAM_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0004)
+#define OMAP4430_PM_CAM_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0004)
 #define OMAP4_RM_CAM_ISS_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_CAM_ISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0024)
+#define OMAP4430_RM_CAM_ISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x0024)
 #define OMAP4_RM_CAM_FDIF_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_CAM_FDIF_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x002c)
+#define OMAP4430_RM_CAM_FDIF_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_INST, 0x002c)
 
 /* PRM.DSS_PRM register offsets */
 #define OMAP4_PM_DSS_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_DSS_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0000)
+#define OMAP4430_PM_DSS_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0000)
 #define OMAP4_PM_DSS_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_DSS_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0004)
+#define OMAP4430_PM_DSS_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0004)
 #define OMAP4_PM_DSS_DSS_WKDEP_OFFSET			0x0020
-#define OMAP4430_PM_DSS_DSS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0020)
+#define OMAP4430_PM_DSS_DSS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0020)
 #define OMAP4_RM_DSS_DSS_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_DSS_DSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0024)
+#define OMAP4430_RM_DSS_DSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x0024)
 #define OMAP4_RM_DSS_DEISS_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_DSS_DEISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x002c)
+#define OMAP4430_RM_DSS_DEISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_INST, 0x002c)
 
 /* PRM.GFX_PRM register offsets */
 #define OMAP4_PM_GFX_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_GFX_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0000)
+#define OMAP4430_PM_GFX_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0000)
 #define OMAP4_PM_GFX_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_GFX_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0004)
+#define OMAP4430_PM_GFX_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0004)
 #define OMAP4_RM_GFX_GFX_CONTEXT_OFFSET			0x0024
-#define OMAP4430_RM_GFX_GFX_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0024)
+#define OMAP4430_RM_GFX_GFX_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_INST, 0x0024)
 
 /* PRM.L3INIT_PRM register offsets */
 #define OMAP4_PM_L3INIT_PWRSTCTRL_OFFSET		0x0000
-#define OMAP4430_PM_L3INIT_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0000)
+#define OMAP4430_PM_L3INIT_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0000)
 #define OMAP4_PM_L3INIT_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_L3INIT_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0004)
+#define OMAP4430_PM_L3INIT_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0004)
 #define OMAP4_PM_L3INIT_MMC1_WKDEP_OFFSET		0x0028
-#define OMAP4430_PM_L3INIT_MMC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0028)
+#define OMAP4430_PM_L3INIT_MMC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0028)
 #define OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_L3INIT_MMC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x002c)
+#define OMAP4430_RM_L3INIT_MMC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x002c)
 #define OMAP4_PM_L3INIT_MMC2_WKDEP_OFFSET		0x0030
-#define OMAP4430_PM_L3INIT_MMC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0030)
+#define OMAP4430_PM_L3INIT_MMC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0030)
 #define OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_L3INIT_MMC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0034)
+#define OMAP4430_RM_L3INIT_MMC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0034)
 #define OMAP4_PM_L3INIT_HSI_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_L3INIT_HSI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0038)
+#define OMAP4430_PM_L3INIT_HSI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0038)
 #define OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_L3INIT_HSI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x003c)
+#define OMAP4430_RM_L3INIT_HSI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x003c)
 #define OMAP4_PM_L3INIT_UNIPRO1_WKDEP_OFFSET		0x0040
-#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0040)
+#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0040)
 #define OMAP4_RM_L3INIT_UNIPRO1_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0044)
+#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0044)
 #define OMAP4_PM_L3INIT_USB_HOST_WKDEP_OFFSET		0x0058
-#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0058)
+#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0058)
 #define OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x005c)
+#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x005c)
 #define OMAP4_PM_L3INIT_USB_OTG_WKDEP_OFFSET		0x0060
-#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0060)
+#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0060)
 #define OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0064)
+#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0064)
 #define OMAP4_PM_L3INIT_USB_TLL_WKDEP_OFFSET		0x0068
-#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0068)
+#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0068)
 #define OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET		0x006c
-#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x006c)
+#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x006c)
 #define OMAP4_RM_L3INIT_P1500_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_L3INIT_P1500_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x007c)
+#define OMAP4430_RM_L3INIT_P1500_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x007c)
 #define OMAP4_RM_L3INIT_EMAC_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_L3INIT_EMAC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0084)
+#define OMAP4430_RM_L3INIT_EMAC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0084)
 #define OMAP4_PM_L3INIT_SATA_WKDEP_OFFSET		0x0088
-#define OMAP4430_PM_L3INIT_SATA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0088)
+#define OMAP4430_PM_L3INIT_SATA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0088)
 #define OMAP4_RM_L3INIT_SATA_CONTEXT_OFFSET		0x008c
-#define OMAP4430_RM_L3INIT_SATA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x008c)
+#define OMAP4430_RM_L3INIT_SATA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x008c)
 #define OMAP4_RM_L3INIT_TPPSS_CONTEXT_OFFSET		0x0094
-#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0094)
+#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0094)
 #define OMAP4_PM_L3INIT_PCIESS_WKDEP_OFFSET		0x0098
-#define OMAP4430_PM_L3INIT_PCIESS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0098)
+#define OMAP4430_PM_L3INIT_PCIESS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x0098)
 #define OMAP4_RM_L3INIT_PCIESS_CONTEXT_OFFSET		0x009c
-#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x009c)
+#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x009c)
 #define OMAP4_RM_L3INIT_CCPTX_CONTEXT_OFFSET		0x00ac
-#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00ac)
+#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00ac)
 #define OMAP4_PM_L3INIT_XHPI_WKDEP_OFFSET		0x00c0
-#define OMAP4430_PM_L3INIT_XHPI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c0)
+#define OMAP4430_PM_L3INIT_XHPI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c0)
 #define OMAP4_RM_L3INIT_XHPI_CONTEXT_OFFSET		0x00c4
-#define OMAP4430_RM_L3INIT_XHPI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c4)
+#define OMAP4430_RM_L3INIT_XHPI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c4)
 #define OMAP4_PM_L3INIT_MMC6_WKDEP_OFFSET		0x00c8
-#define OMAP4430_PM_L3INIT_MMC6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c8)
+#define OMAP4430_PM_L3INIT_MMC6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00c8)
 #define OMAP4_RM_L3INIT_MMC6_CONTEXT_OFFSET		0x00cc
-#define OMAP4430_RM_L3INIT_MMC6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00cc)
+#define OMAP4430_RM_L3INIT_MMC6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00cc)
 #define OMAP4_PM_L3INIT_USB_HOST_FS_WKDEP_OFFSET	0x00d0
-#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d0)
+#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00d0)
 #define OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET	0x00d4
-#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d4)
+#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00d4)
 #define OMAP4_RM_L3INIT_USBPHYOCP2SCP_CONTEXT_OFFSET	0x00e4
-#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT	OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00e4)
+#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT	OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_INST, 0x00e4)
 
 /* PRM.L4PER_PRM register offsets */
 #define OMAP4_PM_L4PER_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_L4PER_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0000)
+#define OMAP4430_PM_L4PER_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0000)
 #define OMAP4_PM_L4PER_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_L4PER_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0004)
+#define OMAP4430_PM_L4PER_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0004)
 #define OMAP4_RM_L4PER_ADC_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_L4PER_ADC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0024)
+#define OMAP4430_RM_L4PER_ADC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0024)
 #define OMAP4_PM_L4PER_DMTIMER10_WKDEP_OFFSET		0x0028
-#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0028)
+#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0028)
 #define OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x002c)
+#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x002c)
 #define OMAP4_PM_L4PER_DMTIMER11_WKDEP_OFFSET		0x0030
-#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0030)
+#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0030)
 #define OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0034)
+#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0034)
 #define OMAP4_PM_L4PER_DMTIMER2_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0038)
+#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0038)
 #define OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x003c)
+#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x003c)
 #define OMAP4_PM_L4PER_DMTIMER3_WKDEP_OFFSET		0x0040
-#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0040)
+#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0040)
 #define OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0044)
+#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0044)
 #define OMAP4_PM_L4PER_DMTIMER4_WKDEP_OFFSET		0x0048
-#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0048)
+#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0048)
 #define OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET		0x004c
-#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x004c)
+#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x004c)
 #define OMAP4_PM_L4PER_DMTIMER9_WKDEP_OFFSET		0x0050
-#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0050)
+#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0050)
 #define OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET		0x0054
-#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0054)
+#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0054)
 #define OMAP4_RM_L4PER_ELM_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_L4PER_ELM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x005c)
+#define OMAP4430_RM_L4PER_ELM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x005c)
 #define OMAP4_PM_L4PER_GPIO2_WKDEP_OFFSET		0x0060
-#define OMAP4430_PM_L4PER_GPIO2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0060)
+#define OMAP4430_PM_L4PER_GPIO2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0060)
 #define OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_L4PER_GPIO2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0064)
+#define OMAP4430_RM_L4PER_GPIO2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0064)
 #define OMAP4_PM_L4PER_GPIO3_WKDEP_OFFSET		0x0068
-#define OMAP4430_PM_L4PER_GPIO3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0068)
+#define OMAP4430_PM_L4PER_GPIO3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0068)
 #define OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET		0x006c
-#define OMAP4430_RM_L4PER_GPIO3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x006c)
+#define OMAP4430_RM_L4PER_GPIO3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x006c)
 #define OMAP4_PM_L4PER_GPIO4_WKDEP_OFFSET		0x0070
-#define OMAP4430_PM_L4PER_GPIO4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0070)
+#define OMAP4430_PM_L4PER_GPIO4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0070)
 #define OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET		0x0074
-#define OMAP4430_RM_L4PER_GPIO4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0074)
+#define OMAP4430_RM_L4PER_GPIO4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0074)
 #define OMAP4_PM_L4PER_GPIO5_WKDEP_OFFSET		0x0078
-#define OMAP4430_PM_L4PER_GPIO5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0078)
+#define OMAP4430_PM_L4PER_GPIO5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0078)
 #define OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_L4PER_GPIO5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x007c)
+#define OMAP4430_RM_L4PER_GPIO5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x007c)
 #define OMAP4_PM_L4PER_GPIO6_WKDEP_OFFSET		0x0080
-#define OMAP4430_PM_L4PER_GPIO6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0080)
+#define OMAP4430_PM_L4PER_GPIO6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0080)
 #define OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_L4PER_GPIO6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0084)
+#define OMAP4430_RM_L4PER_GPIO6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0084)
 #define OMAP4_RM_L4PER_HDQ1W_CONTEXT_OFFSET		0x008c
-#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x008c)
+#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x008c)
 #define OMAP4_PM_L4PER_HECC1_WKDEP_OFFSET		0x0090
-#define OMAP4430_PM_L4PER_HECC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0090)
+#define OMAP4430_PM_L4PER_HECC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0090)
 #define OMAP4_RM_L4PER_HECC1_CONTEXT_OFFSET		0x0094
-#define OMAP4430_RM_L4PER_HECC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0094)
+#define OMAP4430_RM_L4PER_HECC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0094)
 #define OMAP4_PM_L4PER_HECC2_WKDEP_OFFSET		0x0098
-#define OMAP4430_PM_L4PER_HECC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0098)
+#define OMAP4430_PM_L4PER_HECC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0098)
 #define OMAP4_RM_L4PER_HECC2_CONTEXT_OFFSET		0x009c
-#define OMAP4430_RM_L4PER_HECC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x009c)
+#define OMAP4430_RM_L4PER_HECC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x009c)
 #define OMAP4_PM_L4PER_I2C1_WKDEP_OFFSET		0x00a0
-#define OMAP4430_PM_L4PER_I2C1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a0)
+#define OMAP4430_PM_L4PER_I2C1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a0)
 #define OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET		0x00a4
-#define OMAP4430_RM_L4PER_I2C1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a4)
+#define OMAP4430_RM_L4PER_I2C1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a4)
 #define OMAP4_PM_L4PER_I2C2_WKDEP_OFFSET		0x00a8
-#define OMAP4430_PM_L4PER_I2C2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a8)
+#define OMAP4430_PM_L4PER_I2C2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00a8)
 #define OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET		0x00ac
-#define OMAP4430_RM_L4PER_I2C2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ac)
+#define OMAP4430_RM_L4PER_I2C2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00ac)
 #define OMAP4_PM_L4PER_I2C3_WKDEP_OFFSET		0x00b0
-#define OMAP4430_PM_L4PER_I2C3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b0)
+#define OMAP4430_PM_L4PER_I2C3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b0)
 #define OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET		0x00b4
-#define OMAP4430_RM_L4PER_I2C3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b4)
+#define OMAP4430_RM_L4PER_I2C3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b4)
 #define OMAP4_PM_L4PER_I2C4_WKDEP_OFFSET		0x00b8
-#define OMAP4430_PM_L4PER_I2C4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b8)
+#define OMAP4430_PM_L4PER_I2C4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00b8)
 #define OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET		0x00bc
-#define OMAP4430_RM_L4PER_I2C4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00bc)
+#define OMAP4430_RM_L4PER_I2C4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00bc)
 #define OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET		0x00c0
-#define OMAP4430_RM_L4PER_L4_PER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00c0)
+#define OMAP4430_RM_L4PER_L4_PER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00c0)
 #define OMAP4_PM_L4PER_MCASP2_WKDEP_OFFSET		0x00d0
-#define OMAP4430_PM_L4PER_MCASP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d0)
+#define OMAP4430_PM_L4PER_MCASP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d0)
 #define OMAP4_RM_L4PER_MCASP2_CONTEXT_OFFSET		0x00d4
-#define OMAP4430_RM_L4PER_MCASP2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d4)
+#define OMAP4430_RM_L4PER_MCASP2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d4)
 #define OMAP4_PM_L4PER_MCASP3_WKDEP_OFFSET		0x00d8
-#define OMAP4430_PM_L4PER_MCASP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d8)
+#define OMAP4430_PM_L4PER_MCASP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00d8)
 #define OMAP4_RM_L4PER_MCASP3_CONTEXT_OFFSET		0x00dc
-#define OMAP4430_RM_L4PER_MCASP3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00dc)
+#define OMAP4430_RM_L4PER_MCASP3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00dc)
 #define OMAP4_PM_L4PER_MCBSP4_WKDEP_OFFSET		0x00e0
-#define OMAP4430_PM_L4PER_MCBSP4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e0)
+#define OMAP4430_PM_L4PER_MCBSP4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00e0)
 #define OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET		0x00e4
-#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e4)
+#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00e4)
 #define OMAP4_RM_L4PER_MGATE_CONTEXT_OFFSET		0x00ec
-#define OMAP4430_RM_L4PER_MGATE_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ec)
+#define OMAP4430_RM_L4PER_MGATE_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00ec)
 #define OMAP4_PM_L4PER_MCSPI1_WKDEP_OFFSET		0x00f0
-#define OMAP4430_PM_L4PER_MCSPI1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f0)
+#define OMAP4430_PM_L4PER_MCSPI1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f0)
 #define OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET		0x00f4
-#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f4)
+#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f4)
 #define OMAP4_PM_L4PER_MCSPI2_WKDEP_OFFSET		0x00f8
-#define OMAP4430_PM_L4PER_MCSPI2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f8)
+#define OMAP4430_PM_L4PER_MCSPI2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00f8)
 #define OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET		0x00fc
-#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00fc)
+#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x00fc)
 #define OMAP4_PM_L4PER_MCSPI3_WKDEP_OFFSET		0x0100
-#define OMAP4430_PM_L4PER_MCSPI3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0100)
+#define OMAP4430_PM_L4PER_MCSPI3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0100)
 #define OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET		0x0104
-#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0104)
+#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0104)
 #define OMAP4_PM_L4PER_MCSPI4_WKDEP_OFFSET		0x0108
-#define OMAP4430_PM_L4PER_MCSPI4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0108)
+#define OMAP4430_PM_L4PER_MCSPI4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0108)
 #define OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET		0x010c
-#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x010c)
+#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x010c)
 #define OMAP4_PM_L4PER_MMCSD3_WKDEP_OFFSET		0x0120
-#define OMAP4430_PM_L4PER_MMCSD3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0120)
+#define OMAP4430_PM_L4PER_MMCSD3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0120)
 #define OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET		0x0124
-#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0124)
+#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0124)
 #define OMAP4_PM_L4PER_MMCSD4_WKDEP_OFFSET		0x0128
-#define OMAP4430_PM_L4PER_MMCSD4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0128)
+#define OMAP4430_PM_L4PER_MMCSD4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0128)
 #define OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET		0x012c
-#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x012c)
+#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x012c)
 #define OMAP4_RM_L4PER_MSPROHG_CONTEXT_OFFSET		0x0134
-#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0134)
+#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0134)
 #define OMAP4_PM_L4PER_SLIMBUS2_WKDEP_OFFSET		0x0138
-#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0138)
+#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0138)
 #define OMAP4_RM_L4PER_SLIMBUS2_CONTEXT_OFFSET		0x013c
-#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x013c)
+#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x013c)
 #define OMAP4_PM_L4PER_UART1_WKDEP_OFFSET		0x0140
-#define OMAP4430_PM_L4PER_UART1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0140)
+#define OMAP4430_PM_L4PER_UART1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0140)
 #define OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET		0x0144
-#define OMAP4430_RM_L4PER_UART1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0144)
+#define OMAP4430_RM_L4PER_UART1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0144)
 #define OMAP4_PM_L4PER_UART2_WKDEP_OFFSET		0x0148
-#define OMAP4430_PM_L4PER_UART2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0148)
+#define OMAP4430_PM_L4PER_UART2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0148)
 #define OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET		0x014c
-#define OMAP4430_RM_L4PER_UART2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x014c)
+#define OMAP4430_RM_L4PER_UART2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x014c)
 #define OMAP4_PM_L4PER_UART3_WKDEP_OFFSET		0x0150
-#define OMAP4430_PM_L4PER_UART3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0150)
+#define OMAP4430_PM_L4PER_UART3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0150)
 #define OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET		0x0154
-#define OMAP4430_RM_L4PER_UART3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0154)
+#define OMAP4430_RM_L4PER_UART3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0154)
 #define OMAP4_PM_L4PER_UART4_WKDEP_OFFSET		0x0158
-#define OMAP4430_PM_L4PER_UART4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0158)
+#define OMAP4430_PM_L4PER_UART4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0158)
 #define OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET		0x015c
-#define OMAP4430_RM_L4PER_UART4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x015c)
+#define OMAP4430_RM_L4PER_UART4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x015c)
 #define OMAP4_PM_L4PER_MMCSD5_WKDEP_OFFSET		0x0160
-#define OMAP4430_PM_L4PER_MMCSD5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0160)
+#define OMAP4430_PM_L4PER_MMCSD5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0160)
 #define OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET		0x0164
-#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0164)
+#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0164)
 #define OMAP4_PM_L4PER_I2C5_WKDEP_OFFSET		0x0168
-#define OMAP4430_PM_L4PER_I2C5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0168)
+#define OMAP4430_PM_L4PER_I2C5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x0168)
 #define OMAP4_RM_L4PER_I2C5_CONTEXT_OFFSET		0x016c
-#define OMAP4430_RM_L4PER_I2C5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x016c)
+#define OMAP4430_RM_L4PER_I2C5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x016c)
 #define OMAP4_RM_L4SEC_AES1_CONTEXT_OFFSET		0x01a4
-#define OMAP4430_RM_L4SEC_AES1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01a4)
+#define OMAP4430_RM_L4SEC_AES1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01a4)
 #define OMAP4_RM_L4SEC_AES2_CONTEXT_OFFSET		0x01ac
-#define OMAP4430_RM_L4SEC_AES2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01ac)
+#define OMAP4430_RM_L4SEC_AES2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01ac)
 #define OMAP4_RM_L4SEC_DES3DES_CONTEXT_OFFSET		0x01b4
-#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01b4)
+#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01b4)
 #define OMAP4_RM_L4SEC_PKAEIP29_CONTEXT_OFFSET		0x01bc
-#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01bc)
+#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01bc)
 #define OMAP4_RM_L4SEC_RNG_CONTEXT_OFFSET		0x01c4
-#define OMAP4430_RM_L4SEC_RNG_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01c4)
+#define OMAP4430_RM_L4SEC_RNG_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01c4)
 #define OMAP4_RM_L4SEC_SHA2MD51_CONTEXT_OFFSET		0x01cc
-#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01cc)
+#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01cc)
 #define OMAP4_RM_L4SEC_CRYPTODMA_CONTEXT_OFFSET		0x01dc
-#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01dc)
+#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_INST, 0x01dc)
 
 /* PRM.CEFUSE_PRM register offsets */
 #define OMAP4_PM_CEFUSE_PWRSTCTRL_OFFSET		0x0000
-#define OMAP4430_PM_CEFUSE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0000)
+#define OMAP4430_PM_CEFUSE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0000)
 #define OMAP4_PM_CEFUSE_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CEFUSE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0004)
+#define OMAP4430_PM_CEFUSE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0004)
 #define OMAP4_RM_CEFUSE_CEFUSE_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0024)
+#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_INST, 0x0024)
 
 /* PRM.WKUP_PRM register offsets */
 #define OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0024)
+#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0024)
 #define OMAP4_RM_WKUP_WDT1_CONTEXT_OFFSET		0x002c
-#define OMAP4430_RM_WKUP_WDT1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x002c)
+#define OMAP4430_RM_WKUP_WDT1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x002c)
 #define OMAP4_PM_WKUP_WDT2_WKDEP_OFFSET			0x0030
-#define OMAP4430_PM_WKUP_WDT2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0030)
+#define OMAP4430_PM_WKUP_WDT2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0030)
 #define OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET		0x0034
-#define OMAP4430_RM_WKUP_WDT2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0034)
+#define OMAP4430_RM_WKUP_WDT2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0034)
 #define OMAP4_PM_WKUP_GPIO1_WKDEP_OFFSET		0x0038
-#define OMAP4430_PM_WKUP_GPIO1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0038)
+#define OMAP4430_PM_WKUP_GPIO1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0038)
 #define OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET		0x003c
-#define OMAP4430_RM_WKUP_GPIO1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x003c)
+#define OMAP4430_RM_WKUP_GPIO1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x003c)
 #define OMAP4_PM_WKUP_TIMER1_WKDEP_OFFSET		0x0040
-#define OMAP4430_PM_WKUP_TIMER1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0040)
+#define OMAP4430_PM_WKUP_TIMER1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0040)
 #define OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET		0x0044
-#define OMAP4430_RM_WKUP_TIMER1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0044)
+#define OMAP4430_RM_WKUP_TIMER1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0044)
 #define OMAP4_PM_WKUP_TIMER12_WKDEP_OFFSET		0x0048
-#define OMAP4430_PM_WKUP_TIMER12_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0048)
+#define OMAP4430_PM_WKUP_TIMER12_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0048)
 #define OMAP4_RM_WKUP_TIMER12_CONTEXT_OFFSET		0x004c
-#define OMAP4430_RM_WKUP_TIMER12_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x004c)
+#define OMAP4430_RM_WKUP_TIMER12_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x004c)
 #define OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET		0x0054
-#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0054)
+#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0054)
 #define OMAP4_PM_WKUP_USIM_WKDEP_OFFSET			0x0058
-#define OMAP4430_PM_WKUP_USIM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0058)
+#define OMAP4430_PM_WKUP_USIM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0058)
 #define OMAP4_RM_WKUP_USIM_CONTEXT_OFFSET		0x005c
-#define OMAP4430_RM_WKUP_USIM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x005c)
+#define OMAP4430_RM_WKUP_USIM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x005c)
 #define OMAP4_RM_WKUP_SARRAM_CONTEXT_OFFSET		0x0064
-#define OMAP4430_RM_WKUP_SARRAM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0064)
+#define OMAP4430_RM_WKUP_SARRAM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0064)
 #define OMAP4_PM_WKUP_KEYBOARD_WKDEP_OFFSET		0x0078
-#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0078)
+#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0078)
 #define OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET		0x007c
-#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x007c)
+#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x007c)
 #define OMAP4_PM_WKUP_RTC_WKDEP_OFFSET			0x0080
-#define OMAP4430_PM_WKUP_RTC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0080)
+#define OMAP4430_PM_WKUP_RTC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0080)
 #define OMAP4_RM_WKUP_RTC_CONTEXT_OFFSET		0x0084
-#define OMAP4430_RM_WKUP_RTC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0084)
+#define OMAP4430_RM_WKUP_RTC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_INST, 0x0084)
 
 /* PRM.WKUP_CM register offsets */
 #define OMAP4_CM_WKUP_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_WKUP_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0000)
+#define OMAP4430_CM_WKUP_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0000)
 #define OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0020)
+#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0020)
 #define OMAP4_CM_WKUP_WDT1_CLKCTRL_OFFSET		0x0028
-#define OMAP4430_CM_WKUP_WDT1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0028)
+#define OMAP4430_CM_WKUP_WDT1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0028)
 #define OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET		0x0030
-#define OMAP4430_CM_WKUP_WDT2_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0030)
+#define OMAP4430_CM_WKUP_WDT2_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0030)
 #define OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET		0x0038
-#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0038)
+#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0038)
 #define OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET		0x0040
-#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0040)
+#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0040)
 #define OMAP4_CM_WKUP_TIMER12_CLKCTRL_OFFSET		0x0048
-#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0048)
+#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0048)
 #define OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET		0x0050
-#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0050)
+#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0050)
 #define OMAP4_CM_WKUP_USIM_CLKCTRL_OFFSET		0x0058
-#define OMAP4430_CM_WKUP_USIM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0058)
+#define OMAP4430_CM_WKUP_USIM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0058)
 #define OMAP4_CM_WKUP_SARRAM_CLKCTRL_OFFSET		0x0060
-#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0060)
+#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0060)
 #define OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET		0x0078
-#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0078)
+#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0078)
 #define OMAP4_CM_WKUP_RTC_CLKCTRL_OFFSET		0x0080
-#define OMAP4430_CM_WKUP_RTC_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0080)
+#define OMAP4430_CM_WKUP_RTC_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0080)
 #define OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET		0x0088
-#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0088)
+#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_INST, 0x0088)
 
 /* PRM.EMU_PRM register offsets */
 #define OMAP4_PM_EMU_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_EMU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0000)
+#define OMAP4430_PM_EMU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0000)
 #define OMAP4_PM_EMU_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_EMU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0004)
+#define OMAP4430_PM_EMU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0004)
 #define OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET		0x0024
-#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0024)
+#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_INST, 0x0024)
 
 /* PRM.EMU_CM register offsets */
 #define OMAP4_CM_EMU_CLKSTCTRL_OFFSET			0x0000
-#define OMAP4430_CM_EMU_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0000)
+#define OMAP4430_CM_EMU_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0000)
 #define OMAP4_CM_EMU_DYNAMICDEP_OFFSET			0x0008
-#define OMAP4430_CM_EMU_DYNAMICDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0008)
+#define OMAP4430_CM_EMU_DYNAMICDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0008)
 #define OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET		0x0020
-#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0020)
+#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_INST, 0x0020)
 
 /* PRM.DEVICE_PRM register offsets */
 #define OMAP4_PRM_RSTCTRL_OFFSET			0x0000
-#define OMAP4430_PRM_RSTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0000)
+#define OMAP4430_PRM_RSTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0000)
 #define OMAP4_PRM_RSTST_OFFSET				0x0004
-#define OMAP4430_PRM_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0004)
+#define OMAP4430_PRM_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0004)
 #define OMAP4_PRM_RSTTIME_OFFSET			0x0008
-#define OMAP4430_PRM_RSTTIME				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0008)
+#define OMAP4430_PRM_RSTTIME				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0008)
 #define OMAP4_PRM_CLKREQCTRL_OFFSET			0x000c
-#define OMAP4430_PRM_CLKREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x000c)
+#define OMAP4430_PRM_CLKREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x000c)
 #define OMAP4_PRM_VOLTCTRL_OFFSET			0x0010
-#define OMAP4430_PRM_VOLTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0010)
+#define OMAP4430_PRM_VOLTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0010)
 #define OMAP4_PRM_PWRREQCTRL_OFFSET			0x0014
-#define OMAP4430_PRM_PWRREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0014)
+#define OMAP4430_PRM_PWRREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0014)
 #define OMAP4_PRM_PSCON_COUNT_OFFSET			0x0018
-#define OMAP4430_PRM_PSCON_COUNT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0018)
+#define OMAP4430_PRM_PSCON_COUNT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0018)
 #define OMAP4_PRM_IO_COUNT_OFFSET			0x001c
-#define OMAP4430_PRM_IO_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x001c)
+#define OMAP4430_PRM_IO_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x001c)
 #define OMAP4_PRM_IO_PMCTRL_OFFSET			0x0020
-#define OMAP4430_PRM_IO_PMCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0020)
+#define OMAP4430_PRM_IO_PMCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0020)
 #define OMAP4_PRM_VOLTSETUP_WARMRESET_OFFSET		0x0024
-#define OMAP4430_PRM_VOLTSETUP_WARMRESET		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0024)
+#define OMAP4430_PRM_VOLTSETUP_WARMRESET		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0024)
 #define OMAP4_PRM_VOLTSETUP_CORE_OFF_OFFSET		0x0028
-#define OMAP4430_PRM_VOLTSETUP_CORE_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0028)
+#define OMAP4430_PRM_VOLTSETUP_CORE_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0028)
 #define OMAP4_PRM_VOLTSETUP_MPU_OFF_OFFSET		0x002c
-#define OMAP4430_PRM_VOLTSETUP_MPU_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x002c)
+#define OMAP4430_PRM_VOLTSETUP_MPU_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x002c)
 #define OMAP4_PRM_VOLTSETUP_IVA_OFF_OFFSET		0x0030
-#define OMAP4430_PRM_VOLTSETUP_IVA_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0030)
+#define OMAP4430_PRM_VOLTSETUP_IVA_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0030)
 #define OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET	0x0034
-#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0034)
+#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0034)
 #define OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET	0x0038
-#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0038)
+#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0038)
 #define OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET	0x003c
-#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x003c)
+#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x003c)
 #define OMAP4_PRM_VP_CORE_CONFIG_OFFSET			0x0040
-#define OMAP4430_PRM_VP_CORE_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0040)
+#define OMAP4430_PRM_VP_CORE_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0040)
 #define OMAP4_PRM_VP_CORE_STATUS_OFFSET			0x0044
-#define OMAP4430_PRM_VP_CORE_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0044)
+#define OMAP4430_PRM_VP_CORE_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0044)
 #define OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET		0x0048
-#define OMAP4430_PRM_VP_CORE_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0048)
+#define OMAP4430_PRM_VP_CORE_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0048)
 #define OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET		0x004c
-#define OMAP4430_PRM_VP_CORE_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x004c)
+#define OMAP4430_PRM_VP_CORE_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x004c)
 #define OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET		0x0050
-#define OMAP4430_PRM_VP_CORE_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0050)
+#define OMAP4430_PRM_VP_CORE_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0050)
 #define OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET		0x0054
-#define OMAP4430_PRM_VP_CORE_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0054)
+#define OMAP4430_PRM_VP_CORE_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0054)
 #define OMAP4_PRM_VP_MPU_CONFIG_OFFSET			0x0058
-#define OMAP4430_PRM_VP_MPU_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0058)
+#define OMAP4430_PRM_VP_MPU_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0058)
 #define OMAP4_PRM_VP_MPU_STATUS_OFFSET			0x005c
-#define OMAP4430_PRM_VP_MPU_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x005c)
+#define OMAP4430_PRM_VP_MPU_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x005c)
 #define OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET		0x0060
-#define OMAP4430_PRM_VP_MPU_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0060)
+#define OMAP4430_PRM_VP_MPU_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0060)
 #define OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET			0x0064
-#define OMAP4430_PRM_VP_MPU_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0064)
+#define OMAP4430_PRM_VP_MPU_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0064)
 #define OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET		0x0068
-#define OMAP4430_PRM_VP_MPU_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0068)
+#define OMAP4430_PRM_VP_MPU_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0068)
 #define OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET		0x006c
-#define OMAP4430_PRM_VP_MPU_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x006c)
+#define OMAP4430_PRM_VP_MPU_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x006c)
 #define OMAP4_PRM_VP_IVA_CONFIG_OFFSET			0x0070
-#define OMAP4430_PRM_VP_IVA_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0070)
+#define OMAP4430_PRM_VP_IVA_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0070)
 #define OMAP4_PRM_VP_IVA_STATUS_OFFSET			0x0074
-#define OMAP4430_PRM_VP_IVA_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0074)
+#define OMAP4430_PRM_VP_IVA_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0074)
 #define OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET		0x0078
-#define OMAP4430_PRM_VP_IVA_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0078)
+#define OMAP4430_PRM_VP_IVA_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0078)
 #define OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET			0x007c
-#define OMAP4430_PRM_VP_IVA_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x007c)
+#define OMAP4430_PRM_VP_IVA_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x007c)
 #define OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET		0x0080
-#define OMAP4430_PRM_VP_IVA_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0080)
+#define OMAP4430_PRM_VP_IVA_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0080)
 #define OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET		0x0084
-#define OMAP4430_PRM_VP_IVA_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0084)
+#define OMAP4430_PRM_VP_IVA_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0084)
 #define OMAP4_PRM_VC_SMPS_SA_OFFSET			0x0088
-#define OMAP4430_PRM_VC_SMPS_SA				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0088)
+#define OMAP4430_PRM_VC_SMPS_SA				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0088)
 #define OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET		0x008c
-#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x008c)
+#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x008c)
 #define OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET		0x0090
-#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0090)
+#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0090)
 #define OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET		0x0094
-#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0094)
+#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0094)
 #define OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET		0x0098
-#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0098)
+#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x0098)
 #define OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET		0x009c
-#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x009c)
+#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x009c)
 #define OMAP4_PRM_VC_VAL_BYPASS_OFFSET			0x00a0
-#define OMAP4430_PRM_VC_VAL_BYPASS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a0)
+#define OMAP4430_PRM_VC_VAL_BYPASS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a0)
 #define OMAP4_PRM_VC_CFG_CHANNEL_OFFSET			0x00a4
-#define OMAP4430_PRM_VC_CFG_CHANNEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a4)
-#define OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET		0x00a8
-#define OMAP4430_PRM_VC_CFG_I2C_MODE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a8)
+#define OMAP4430_PRM_VC_CFG_CHANNEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a4)
+#define OMAP4_PRM_VC_CFG_I2C_INSTE_OFFSET		0x00a8
+#define OMAP4430_PRM_VC_CFG_I2C_INSTE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a8)
 #define OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET			0x00ac
-#define OMAP4430_PRM_VC_CFG_I2C_CLK			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ac)
+#define OMAP4430_PRM_VC_CFG_I2C_CLK			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00ac)
 #define OMAP4_PRM_SRAM_COUNT_OFFSET			0x00b0
-#define OMAP4430_PRM_SRAM_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b0)
+#define OMAP4430_PRM_SRAM_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b0)
 #define OMAP4_PRM_SRAM_WKUP_SETUP_OFFSET		0x00b4
-#define OMAP4430_PRM_SRAM_WKUP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b4)
+#define OMAP4430_PRM_SRAM_WKUP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b4)
 #define OMAP4_PRM_LDO_SRAM_CORE_SETUP_OFFSET		0x00b8
-#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b8)
+#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00b8)
 #define OMAP4_PRM_LDO_SRAM_CORE_CTRL_OFFSET		0x00bc
-#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00bc)
+#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00bc)
 #define OMAP4_PRM_LDO_SRAM_MPU_SETUP_OFFSET		0x00c0
-#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c0)
+#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c0)
 #define OMAP4_PRM_LDO_SRAM_MPU_CTRL_OFFSET		0x00c4
-#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c4)
+#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c4)
 #define OMAP4_PRM_LDO_SRAM_IVA_SETUP_OFFSET		0x00c8
-#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c8)
+#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00c8)
 #define OMAP4_PRM_LDO_SRAM_IVA_CTRL_OFFSET		0x00cc
-#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00cc)
+#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00cc)
 #define OMAP4_PRM_LDO_ABB_MPU_SETUP_OFFSET		0x00d0
-#define OMAP4430_PRM_LDO_ABB_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d0)
+#define OMAP4430_PRM_LDO_ABB_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d0)
 #define OMAP4_PRM_LDO_ABB_MPU_CTRL_OFFSET		0x00d4
-#define OMAP4430_PRM_LDO_ABB_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d4)
+#define OMAP4430_PRM_LDO_ABB_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d4)
 #define OMAP4_PRM_LDO_ABB_IVA_SETUP_OFFSET		0x00d8
-#define OMAP4430_PRM_LDO_ABB_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8)
+#define OMAP4430_PRM_LDO_ABB_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00d8)
 #define OMAP4_PRM_LDO_ABB_IVA_CTRL_OFFSET		0x00dc
-#define OMAP4430_PRM_LDO_ABB_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc)
+#define OMAP4430_PRM_LDO_ABB_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00dc)
 #define OMAP4_PRM_LDO_BANDGAP_SETUP_OFFSET		0x00e0
-#define OMAP4430_PRM_LDO_BANDGAP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0)
+#define OMAP4430_PRM_LDO_BANDGAP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e0)
 #define OMAP4_PRM_DEVICE_OFF_CTRL_OFFSET		0x00e4
-#define OMAP4430_PRM_DEVICE_OFF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4)
+#define OMAP4430_PRM_DEVICE_OFF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e4)
 #define OMAP4_PRM_PHASE1_CNDP_OFFSET			0x00e8
-#define OMAP4430_PRM_PHASE1_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e8)
+#define OMAP4430_PRM_PHASE1_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00e8)
 #define OMAP4_PRM_PHASE2A_CNDP_OFFSET			0x00ec
-#define OMAP4430_PRM_PHASE2A_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ec)
+#define OMAP4430_PRM_PHASE2A_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00ec)
 #define OMAP4_PRM_PHASE2B_CNDP_OFFSET			0x00f0
-#define OMAP4430_PRM_PHASE2B_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0)
-#define OMAP4_PRM_MODEM_IF_CTRL_OFFSET			0x00f4
-#define OMAP4430_PRM_MODEM_IF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4)
+#define OMAP4430_PRM_PHASE2B_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f0)
+#define OMAP4_PRM_INSTEM_IF_CTRL_OFFSET			0x00f4
+#define OMAP4430_PRM_INSTEM_IF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f4)
 #define OMAP4_PRM_VC_ERRST_OFFSET			0x00f8
-#define OMAP4430_PRM_VC_ERRST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f8)
+#define OMAP4430_PRM_VC_ERRST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f8)
 
-/*
- * PRCM_MPU
- *
- * The PRCM_MPU is a local PRCM inside the MPU subsystem. For the PRCM (global)
- * point of view the PRCM_MPU is a single entity. It shares the same
- * programming model as the global PRCM and thus can be assimilate as two new
- * MOD inside the PRCM
- */
+/* Function prototypes */
+# ifndef __ASSEMBLER__
+
+extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx);
+extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
+extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
+extern u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
+extern u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 idx);
+extern u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 idx);
+extern u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
+
+extern int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift);
+extern int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift);
+extern int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift);
+
+extern void omap4_prm_global_warm_sw_reset(void);
+
+# endif
 
-/* PRCM_MPU.OCP_SOCKET_PRCM register offsets */
-#define OMAP4_REVISION_PRCM_OFFSET			0x0000
-#define OMAP4430_REVISION_PRCM				OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_MOD, 0x0000)
-
-/* PRCM_MPU.DEVICE_PRM register offsets */
-#define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET			0x0000
-#define OMAP4430_PRCM_MPU_PRM_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_MOD, 0x0000)
-#define OMAP4_PRCM_MPU_PRM_PSCON_COUNT_OFFSET		0x0004
-#define OMAP4430_PRCM_MPU_PRM_PSCON_COUNT		OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_MOD, 0x0004)
-
-/* PRCM_MPU.CPU0 register offsets */
-#define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_CPU0_PWRSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0000)
-#define OMAP4_PM_CPU0_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CPU0_PWRSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0004)
-#define OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET		0x0008
-#define OMAP4430_RM_CPU0_CPU0_CONTEXT			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0008)
-#define OMAP4_RM_CPU0_CPU0_RSTCTRL_OFFSET		0x000c
-#define OMAP4430_RM_CPU0_CPU0_RSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x000c)
-#define OMAP4_RM_CPU0_CPU0_RSTST_OFFSET			0x0010
-#define OMAP4430_RM_CPU0_CPU0_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0010)
-#define OMAP4_CM_CPU0_CPU0_CLKCTRL_OFFSET		0x0014
-#define OMAP4430_CM_CPU0_CPU0_CLKCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0014)
-#define OMAP4_CM_CPU0_CLKSTCTRL_OFFSET			0x0018
-#define OMAP4430_CM_CPU0_CLKSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_MOD, 0x0018)
-
-/* PRCM_MPU.CPU1 register offsets */
-#define OMAP4_PM_CPU1_PWRSTCTRL_OFFSET			0x0000
-#define OMAP4430_PM_CPU1_PWRSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0000)
-#define OMAP4_PM_CPU1_PWRSTST_OFFSET			0x0004
-#define OMAP4430_PM_CPU1_PWRSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0004)
-#define OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET		0x0008
-#define OMAP4430_RM_CPU1_CPU1_CONTEXT			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0008)
-#define OMAP4_RM_CPU1_CPU1_RSTCTRL_OFFSET		0x000c
-#define OMAP4430_RM_CPU1_CPU1_RSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x000c)
-#define OMAP4_RM_CPU1_CPU1_RSTST_OFFSET			0x0010
-#define OMAP4430_RM_CPU1_CPU1_RSTST			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0010)
-#define OMAP4_CM_CPU1_CPU1_CLKCTRL_OFFSET		0x0014
-#define OMAP4430_CM_CPU1_CPU1_CLKCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0014)
-#define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET			0x0018
-#define OMAP4430_CM_CPU1_CLKSTCTRL			OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_MOD, 0x0018)
 #endif
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
new file mode 100644
index 00000000000..a3032429727
--- /dev/null
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -0,0 +1,66 @@
+/*
+ * OMAP4 PRM instance functions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+
+#include "prm44xx.h"
+#include "prminst44xx.h"
+#include "prm-regbits-44xx.h"
+#include "prcm44xx.h"
+#include "prcm_mpu44xx.h"
+
+static u32 _prm_bases[OMAP4_MAX_PRCM_PARTITIONS] = {
+	[OMAP4430_INVALID_PRCM_PARTITION]	= 0,
+	[OMAP4430_PRM_PARTITION]		= OMAP4430_PRM_BASE,
+	[OMAP4430_CM1_PARTITION]		= 0,
+	[OMAP4430_CM2_PARTITION]		= 0,
+	[OMAP4430_SCRM_PARTITION]		= 0,
+	[OMAP4430_PRCM_MPU_PARTITION]		= OMAP4430_PRCM_MPU_BASE,
+};
+
+/* Read a register in a PRM instance */
+u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
+{
+	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
+	       part == OMAP4430_INVALID_PRCM_PARTITION ||
+	       !_prm_bases[part]);
+	return __raw_readl(OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst +
+					       idx));
+}
+
+/* Write into a register in a PRM instance */
+void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
+{
+	BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
+	       part == OMAP4430_INVALID_PRCM_PARTITION ||
+	       !_prm_bases[part]);
+	__raw_writel(val, OMAP2_L4_IO_ADDRESS(_prm_bases[part] + inst + idx));
+}
+
+/* Read-modify-write a register in PRM. Caller must lock */
+u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
+				   s16 idx)
+{
+	u32 v;
+
+	v = omap4_prminst_read_inst_reg(part, inst, idx);
+	v &= ~mask;
+	v |= bits;
+	omap4_prminst_write_inst_reg(v, part, inst, idx);
+
+	return v;
+}
diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h
new file mode 100644
index 00000000000..02dd66ddda8
--- /dev/null
+++ b/arch/arm/mach-omap2/prminst44xx.h
@@ -0,0 +1,25 @@
+/*
+ * OMAP4 Power/Reset Management (PRM) function prototypes
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
+#define __ARCH_ASM_MACH_OMAP2_PRMINST44XX_H
+
+/*
+ * In an ideal world, we would not export these low-level functions,
+ * but this will probably take some time to fix properly
+ */
+extern u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx);
+extern void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx);
+extern u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
+					   s16 inst, s16 idx);
+
+extern void omap4_prm_global_warm_sw_reset(void);
+
+#endif
diff --git a/arch/arm/mach-omap2/scrm44xx.h b/arch/arm/mach-omap2/scrm44xx.h
new file mode 100644
index 00000000000..701bf2d3294
--- /dev/null
+++ b/arch/arm/mach-omap2/scrm44xx.h
@@ -0,0 +1,175 @@
+/*
+ * OMAP44xx SCRM registers and bitfields
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_SCRM_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_SCRM_44XX_H
+
+#define OMAP4_SCRM_BASE				0x4a30a000
+
+#define OMAP44XX_SCRM_REGADDR(reg)	\
+		OMAP2_L4_IO_ADDRESS(OMAP4_SCRM_BASE + (reg))
+
+/* Registers offset */
+#define OMAP4_SCRM_REVISION_SCRM_OFFSET		0x0000
+#define OMAP4_SCRM_REVISION_SCRM		OMAP44XX_SCRM_REGADDR(0x0000)
+#define OMAP4_SCRM_CLKSETUPTIME_OFFSET		0x0100
+#define OMAP4_SCRM_CLKSETUPTIME			OMAP44XX_SCRM_REGADDR(0x0100)
+#define OMAP4_SCRM_PMICSETUPTIME_OFFSET		0x0104
+#define OMAP4_SCRM_PMICSETUPTIME		OMAP44XX_SCRM_REGADDR(0x0104)
+#define OMAP4_SCRM_ALTCLKSRC_OFFSET		0x0110
+#define OMAP4_SCRM_ALTCLKSRC			OMAP44XX_SCRM_REGADDR(0x0110)
+#define OMAP4_SCRM_MODEMCLKM_OFFSET		0x0118
+#define OMAP4_SCRM_MODEMCLKM			OMAP44XX_SCRM_REGADDR(0x0118)
+#define OMAP4_SCRM_D2DCLKM_OFFSET		0x011c
+#define OMAP4_SCRM_D2DCLKM			OMAP44XX_SCRM_REGADDR(0x011c)
+#define OMAP4_SCRM_EXTCLKREQ_OFFSET		0x0200
+#define OMAP4_SCRM_EXTCLKREQ			OMAP44XX_SCRM_REGADDR(0x0200)
+#define OMAP4_SCRM_ACCCLKREQ_OFFSET		0x0204
+#define OMAP4_SCRM_ACCCLKREQ			OMAP44XX_SCRM_REGADDR(0x0204)
+#define OMAP4_SCRM_PWRREQ_OFFSET		0x0208
+#define OMAP4_SCRM_PWRREQ			OMAP44XX_SCRM_REGADDR(0x0208)
+#define OMAP4_SCRM_AUXCLKREQ0_OFFSET		0x0210
+#define OMAP4_SCRM_AUXCLKREQ0			OMAP44XX_SCRM_REGADDR(0x0210)
+#define OMAP4_SCRM_AUXCLKREQ1_OFFSET		0x0214
+#define OMAP4_SCRM_AUXCLKREQ1			OMAP44XX_SCRM_REGADDR(0x0214)
+#define OMAP4_SCRM_AUXCLKREQ2_OFFSET		0x0218
+#define OMAP4_SCRM_AUXCLKREQ2			OMAP44XX_SCRM_REGADDR(0x0218)
+#define OMAP4_SCRM_AUXCLKREQ3_OFFSET		0x021c
+#define OMAP4_SCRM_AUXCLKREQ3			OMAP44XX_SCRM_REGADDR(0x021c)
+#define OMAP4_SCRM_AUXCLKREQ4_OFFSET		0x0220
+#define OMAP4_SCRM_AUXCLKREQ4			OMAP44XX_SCRM_REGADDR(0x0220)
+#define OMAP4_SCRM_AUXCLKREQ5_OFFSET		0x0224
+#define OMAP4_SCRM_AUXCLKREQ5			OMAP44XX_SCRM_REGADDR(0x0224)
+#define OMAP4_SCRM_D2DCLKREQ_OFFSET		0x0234
+#define OMAP4_SCRM_D2DCLKREQ			OMAP44XX_SCRM_REGADDR(0x0234)
+#define OMAP4_SCRM_AUXCLK0_OFFSET		0x0310
+#define OMAP4_SCRM_AUXCLK0			OMAP44XX_SCRM_REGADDR(0x0310)
+#define OMAP4_SCRM_AUXCLK1_OFFSET		0x0314
+#define OMAP4_SCRM_AUXCLK1			OMAP44XX_SCRM_REGADDR(0x0314)
+#define OMAP4_SCRM_AUXCLK2_OFFSET		0x0318
+#define OMAP4_SCRM_AUXCLK2			OMAP44XX_SCRM_REGADDR(0x0318)
+#define OMAP4_SCRM_AUXCLK3_OFFSET		0x031c
+#define OMAP4_SCRM_AUXCLK3			OMAP44XX_SCRM_REGADDR(0x031c)
+#define OMAP4_SCRM_AUXCLK4_OFFSET		0x0320
+#define OMAP4_SCRM_AUXCLK4			OMAP44XX_SCRM_REGADDR(0x0320)
+#define OMAP4_SCRM_AUXCLK5_OFFSET		0x0324
+#define OMAP4_SCRM_AUXCLK5			OMAP44XX_SCRM_REGADDR(0x0324)
+#define OMAP4_SCRM_RSTTIME_OFFSET		0x0400
+#define OMAP4_SCRM_RSTTIME			OMAP44XX_SCRM_REGADDR(0x0400)
+#define OMAP4_SCRM_MODEMRSTCTRL_OFFSET		0x0418
+#define OMAP4_SCRM_MODEMRSTCTRL			OMAP44XX_SCRM_REGADDR(0x0418)
+#define OMAP4_SCRM_D2DRSTCTRL_OFFSET		0x041c
+#define OMAP4_SCRM_D2DRSTCTRL			OMAP44XX_SCRM_REGADDR(0x041c)
+#define OMAP4_SCRM_EXTPWRONRSTCTRL_OFFSET	0x0420
+#define OMAP4_SCRM_EXTPWRONRSTCTRL		OMAP44XX_SCRM_REGADDR(0x0420)
+#define OMAP4_SCRM_EXTWARMRSTST_OFFSET		0x0510
+#define OMAP4_SCRM_EXTWARMRSTST			OMAP44XX_SCRM_REGADDR(0x0510)
+#define OMAP4_SCRM_APEWARMRSTST_OFFSET		0x0514
+#define OMAP4_SCRM_APEWARMRSTST			OMAP44XX_SCRM_REGADDR(0x0514)
+#define OMAP4_SCRM_MODEMWARMRSTST_OFFSET	0x0518
+#define OMAP4_SCRM_MODEMWARMRSTST		OMAP44XX_SCRM_REGADDR(0x0518)
+#define OMAP4_SCRM_D2DWARMRSTST_OFFSET		0x051c
+#define OMAP4_SCRM_D2DWARMRSTST			OMAP44XX_SCRM_REGADDR(0x051c)
+
+/* Registers shifts and masks */
+
+/* REVISION_SCRM */
+#define OMAP4_REV_SHIFT				0
+#define OMAP4_REV_MASK				(0xff << 0)
+
+/* CLKSETUPTIME */
+#define OMAP4_DOWNTIME_SHIFT			16
+#define OMAP4_DOWNTIME_MASK			(0x3f << 16)
+#define OMAP4_SETUPTIME_SHIFT			0
+#define OMAP4_SETUPTIME_MASK			(0xfff << 0)
+
+/* PMICSETUPTIME */
+#define OMAP4_WAKEUPTIME_SHIFT			16
+#define OMAP4_WAKEUPTIME_MASK			(0x3f << 16)
+#define OMAP4_SLEEPTIME_SHIFT			0
+#define OMAP4_SLEEPTIME_MASK			(0x3f << 0)
+
+/* ALTCLKSRC */
+#define OMAP4_ENABLE_EXT_SHIFT			3
+#define OMAP4_ENABLE_EXT_MASK			(1 << 3)
+#define OMAP4_ENABLE_INT_SHIFT			2
+#define OMAP4_ENABLE_INT_MASK			(1 << 2)
+#define OMAP4_ALTCLKSRC_MODE_SHIFT		0
+#define OMAP4_ALTCLKSRC_MODE_MASK		(0x3 << 0)
+
+/* MODEMCLKM */
+#define OMAP4_CLK_32KHZ_SHIFT			0
+#define OMAP4_CLK_32KHZ_MASK			(1 << 0)
+
+/* D2DCLKM */
+#define OMAP4_SYSCLK_SHIFT			1
+#define OMAP4_SYSCLK_MASK			(1 << 1)
+
+/* EXTCLKREQ */
+#define OMAP4_POLARITY_SHIFT			0
+#define OMAP4_POLARITY_MASK			(1 << 0)
+
+/* AUXCLKREQ0 */
+#define OMAP4_MAPPING_SHIFT			2
+#define OMAP4_MAPPING_MASK			(0x7 << 2)
+#define OMAP4_ACCURACY_SHIFT			1
+#define OMAP4_ACCURACY_MASK			(1 << 1)
+
+/* AUXCLK0 */
+#define OMAP4_CLKDIV_SHIFT			16
+#define OMAP4_CLKDIV_MASK			(0xf << 16)
+#define OMAP4_DISABLECLK_SHIFT			9
+#define OMAP4_DISABLECLK_MASK			(1 << 9)
+#define OMAP4_ENABLE_SHIFT			8
+#define OMAP4_ENABLE_MASK			(1 << 8)
+#define OMAP4_SRCSELECT_SHIFT			1
+#define OMAP4_SRCSELECT_MASK			(0x3 << 1)
+
+/* RSTTIME */
+#define OMAP4_RSTTIME_SHIFT			0
+#define OMAP4_RSTTIME_MASK			(0xf << 0)
+
+/* MODEMRSTCTRL */
+#define OMAP4_WARMRST_SHIFT			1
+#define OMAP4_WARMRST_MASK			(1 << 1)
+#define OMAP4_COLDRST_SHIFT			0
+#define OMAP4_COLDRST_MASK			(1 << 0)
+
+/* EXTPWRONRSTCTRL */
+#define OMAP4_PWRONRST_SHIFT			1
+#define OMAP4_PWRONRST_MASK			(1 << 1)
+#define OMAP4_ENABLE_EXTPWRONRSTCTRL_SHIFT	0
+#define OMAP4_ENABLE_EXTPWRONRSTCTRL_MASK	(1 << 0)
+
+/* EXTWARMRSTST */
+#define OMAP4_EXTWARMRSTST_SHIFT		0
+#define OMAP4_EXTWARMRSTST_MASK			(1 << 0)
+
+/* APEWARMRSTST */
+#define OMAP4_APEWARMRSTST_SHIFT		1
+#define OMAP4_APEWARMRSTST_MASK			(1 << 1)
+
+/* MODEMWARMRSTST */
+#define OMAP4_MODEMWARMRSTST_SHIFT		2
+#define OMAP4_MODEMWARMRSTST_MASK		(1 << 2)
+
+/* D2DWARMRSTST */
+#define OMAP4_D2DWARMRSTST_SHIFT		3
+#define OMAP4_D2DWARMRSTST_MASK			(1 << 3)
+
+#endif
diff --git a/arch/arm/mach-omap2/board-rx51-sdram.c b/arch/arm/mach-omap2/sdram-nokia.c
index a43b2c5c838..14caa228bc0 100644
--- a/arch/arm/mach-omap2/board-rx51-sdram.c
+++ b/arch/arm/mach-omap2/sdram-nokia.c
@@ -1,7 +1,7 @@
 /*
- * SDRC register values for RX51
+ * SDRC register values for Nokia boards
  *
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008, 2010 Nokia Corporation
  *
  * Lauri Leukkunen <lauri.leukkunen@nokia.com>
  *
@@ -22,6 +22,7 @@
 #include <plat/clock.h>
 #include <plat/sdrc.h>
 
+#include "sdram-nokia.h"
 
 /* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
 struct sdram_timings {
@@ -43,9 +44,28 @@ struct sdram_timings {
 	u32 tWTR;
 };
 
-static struct omap_sdrc_params rx51_sdrc_params[4];
+static const struct sdram_timings nokia_97dot6mhz_timings[] = {
+	{
+		.casl = 3,
+		.tDAL = 30725,
+		.tDPL = 15362,
+		.tRRD = 10241,
+		.tRCD = 20483,
+		.tRP = 15362,
+		.tRAS = 40967,
+		.tRC = 56330,
+		.tRFC = 138266,
+		.tXSR = 204839,
+
+		.tREF = 7798,
+
+		.tXP = 2,
+		.tCKE = 4,
+		.tWTR = 2,
+	},
+};
 
-static const struct sdram_timings rx51_timings[] = {
+static const struct sdram_timings nokia_166mhz_timings[] = {
 	{
 		.casl = 3,
 		.tDAL = 33000,
@@ -66,6 +86,38 @@ static const struct sdram_timings rx51_timings[] = {
 	},
 };
 
+static const struct sdram_timings nokia_195dot2mhz_timings[] = {
+	{
+		.casl = 3,
+		.tDAL = 30725,
+		.tDPL = 15362,
+		.tRRD = 10241,
+		.tRCD = 20483,
+		.tRP = 15362,
+		.tRAS = 40967,
+		.tRC = 56330,
+		.tRFC = 138266,
+		.tXSR = 204839,
+
+		.tREF = 7752,
+
+		.tXP = 2,
+		.tCKE = 4,
+		.tWTR = 2,
+	},
+};
+
+static const struct {
+	long rate;
+	struct sdram_timings const *data;
+} nokia_timings[] = {
+	{ 83000000, nokia_166mhz_timings },
+	{ 97600000, nokia_97dot6mhz_timings },
+	{ 166000000, nokia_166mhz_timings },
+	{ 195200000, nokia_195dot2mhz_timings },
+};
+static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1];
+
 static unsigned long sdrc_get_fclk_period(long rate)
 {
 	/* In picoseconds */
@@ -110,12 +162,12 @@ static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
 #ifdef DEBUG
 #define SDRC_SET_ONE(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval((reg), (st), (end), \
-			rx51_timings->field, (rate), #field) < 0) \
+			memory_timings->field, (rate), #field) < 0) \
 		err = -1;
 #else
 #define SDRC_SET_ONE(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval((reg), (st), (end), \
-			rx51_timings->field) < 0) \
+			memory_timings->field) < 0) \
 		err = -1;
 #endif
 
@@ -148,18 +200,19 @@ static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
 #ifdef DEBUG
 #define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
-			rx51_timings->field, \
+			memory_timings->field, \
 			(rate), #field) < 0) \
 		err = -1;
 
 #else
 #define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
-			rx51_timings->field, (rate)) < 0) \
+			memory_timings->field, (rate)) < 0) \
 		err = -1;
 #endif
 
-static int sdrc_timings(int id, long rate)
+static int sdrc_timings(int id, long rate,
+			const struct sdram_timings *memory_timings)
 {
 	u32 ticks_per_ms;
 	u32 rfr, l;
@@ -184,7 +237,7 @@ static int sdrc_timings(int id, long rate)
 	SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate);
 
 	ticks_per_ms = l3_rate;
-	rfr = rx51_timings[0].tREF * ticks_per_ms / 1000000;
+	rfr = memory_timings[0].tREF * ticks_per_ms / 1000000;
 	if (rfr > 65535 + 50)
 		rfr = 65535;
 	else
@@ -197,25 +250,30 @@ static int sdrc_timings(int id, long rate)
 	l = rfr << 8;
 	rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */
 
-	rx51_sdrc_params[id].rate = rate;
-	rx51_sdrc_params[id].actim_ctrla = actim_ctrla;
-	rx51_sdrc_params[id].actim_ctrlb = actim_ctrlb;
-	rx51_sdrc_params[id].rfr_ctrl = rfr_ctrl;
-	rx51_sdrc_params[id].mr = 0x32;
+	nokia_sdrc_params[id].rate = rate;
+	nokia_sdrc_params[id].actim_ctrla = actim_ctrla;
+	nokia_sdrc_params[id].actim_ctrlb = actim_ctrlb;
+	nokia_sdrc_params[id].rfr_ctrl = rfr_ctrl;
+	nokia_sdrc_params[id].mr = 0x32;
 
-	rx51_sdrc_params[id + 1].rate = 0;
+	nokia_sdrc_params[id + 1].rate = 0;
 
 	return err;
 }
 
-struct omap_sdrc_params *rx51_get_sdram_timings(void)
+struct omap_sdrc_params *nokia_get_sdram_timings(void)
 {
-	int err;
+	int err = 0;
+	int i;
 
-	err = sdrc_timings(0, 41500000);
-	err |= sdrc_timings(1, 83000000);
-	err |= sdrc_timings(2, 166000000);
+	for (i = 0; i < ARRAY_SIZE(nokia_timings); i++) {
+		err |= sdrc_timings(i, nokia_timings[i].rate,
+				       nokia_timings[i].data);
+		if (err)
+			pr_err("%s: error with rate %ld: %d\n", __func__,
+			       nokia_timings[i].rate, err);
+	}
 
-	return &rx51_sdrc_params[0];
+	return err ? NULL : nokia_sdrc_params;
 }
 
diff --git a/arch/arm/mach-omap2/sdram-nokia.h b/arch/arm/mach-omap2/sdram-nokia.h
new file mode 100644
index 00000000000..ee63da5f8df
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-nokia.h
@@ -0,0 +1,12 @@
+/*
+ * SDRC register values for Nokia boards
+ *
+ * Copyright (C) 2010 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct omap_sdrc_params *nokia_get_sdram_timings(void);
+
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 4c65f5628b3..da6f3a63b5d 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -27,8 +27,6 @@
 #include <plat/clock.h>
 #include <plat/sram.h>
 
-#include "prm.h"
-
 #include <plat/sdrc.h>
 #include "sdrc.h"
 
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 68f57bb67fc..b3f83799e6c 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -74,5 +74,4 @@ static inline u32 sms_read_reg(u16 reg)
  */
 #define SDRC_MPURATE_LOOPS		96
 
-
 #endif
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index 0f4d27aef44..ccdb010f169 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -28,7 +28,7 @@
 #include <plat/clock.h>
 #include <plat/sram.h>
 
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "clock.h"
 #include <plat/sdrc.h>
 #include "sdrc.h"
@@ -99,6 +99,10 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force)
 	m_type = omap2xxx_sdrc_get_type();
 
 	local_irq_save(flags);
+	/*
+	 * XXX These calls should be abstracted out through a
+	 * prm2xxx.c function
+	 */
 	if (cpu_is_omap2420())
 		__raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
 	else
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index becf0e38ef7..c64578853a8 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/serial_8250.h>
 #include <linux/pm_runtime.h>
+#include <linux/console.h>
 
 #ifdef CONFIG_SERIAL_OMAP
 #include <plat/omap-serial.h>
@@ -39,11 +40,12 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
-#include "prm.h"
+#include "prm2xxx_3xxx.h"
 #include "pm.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 #include "prm-regbits-34xx.h"
 #include "control.h"
+#include "mux.h"
 
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
@@ -105,21 +107,16 @@ struct omap_uart_state {
 static LIST_HEAD(uart_list);
 static u8 num_uarts;
 
-/*
- * Since these idle/enable hooks are used in the idle path itself
- * which has interrupts disabled, use the non-locking versions of
- * the hwmod enable/disable functions.
- */
 static int uart_idle_hwmod(struct omap_device *od)
 {
-	_omap_hwmod_idle(od->hwmods[0]);
+	omap_hwmod_idle(od->hwmods[0]);
 
 	return 0;
 }
 
 static int uart_enable_hwmod(struct omap_device *od)
 {
-	_omap_hwmod_enable(od->hwmods[0]);
+	omap_hwmod_enable(od->hwmods[0]);
 
 	return 0;
 }
@@ -168,9 +165,9 @@ static inline void serial_write_reg(struct omap_uart_state *uart, int offset,
 
 static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 {
-	serial_write_reg(uart, UART_OMAP_MDR1, 0x07);
+	serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
 	serial_write_reg(uart, UART_OMAP_SCR, 0x08);
-	serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
+	serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
 }
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
@@ -218,7 +215,7 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
 		return;
 
 	lcr = serial_read_reg(uart, UART_LCR);
-	serial_write_reg(uart, UART_LCR, 0xBF);
+	serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
 	uart->dll = serial_read_reg(uart, UART_DLL);
 	uart->dlh = serial_read_reg(uart, UART_DLM);
 	serial_write_reg(uart, UART_LCR, lcr);
@@ -226,7 +223,7 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
 	uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC);
 	uart->scr = serial_read_reg(uart, UART_OMAP_SCR);
 	uart->wer = serial_read_reg(uart, UART_OMAP_WER);
-	serial_write_reg(uart, UART_LCR, 0x80);
+	serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A);
 	uart->mcr = serial_read_reg(uart, UART_MCR);
 	serial_write_reg(uart, UART_LCR, lcr);
 
@@ -246,32 +243,35 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
 	uart->context_valid = 0;
 
 	if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
-		omap_uart_mdr1_errataset(uart, 0x07, 0xA0);
+		omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_DISABLE, 0xA0);
 	else
-		serial_write_reg(uart, UART_OMAP_MDR1, 0x7);
-	serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+		serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
+
+	serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
 	efr = serial_read_reg(uart, UART_EFR);
 	serial_write_reg(uart, UART_EFR, UART_EFR_ECB);
 	serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
 	serial_write_reg(uart, UART_IER, 0x0);
-	serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_write_reg(uart, UART_DLL, uart->dll);
 	serial_write_reg(uart, UART_DLM, uart->dlh);
 	serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
 	serial_write_reg(uart, UART_IER, uart->ier);
-	serial_write_reg(uart, UART_LCR, 0x80);
+	serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_A);
 	serial_write_reg(uart, UART_MCR, uart->mcr);
-	serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
+	serial_write_reg(uart, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_write_reg(uart, UART_EFR, efr);
 	serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8);
 	serial_write_reg(uart, UART_OMAP_SCR, uart->scr);
 	serial_write_reg(uart, UART_OMAP_WER, uart->wer);
 	serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc);
+
 	if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
-		omap_uart_mdr1_errataset(uart, 0x00, 0xA1);
+		omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_16X_MODE, 0xA1);
 	else
 		/* UART 16x mode */
-		serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
+		serial_write_reg(uart, UART_OMAP_MDR1,
+				UART_OMAP_MDR1_16X_MODE);
 }
 #else
 static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
@@ -406,7 +406,7 @@ void omap_uart_resume_idle(int num)
 	struct omap_uart_state *uart;
 
 	list_for_each_entry(uart, &uart_list, node) {
-		if (num == uart->num) {
+		if (num == uart->num && uart->can_sleep) {
 			omap_uart_enable_clocks(uart);
 
 			/* Check for IO pad wakeup */
@@ -491,6 +491,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		u32 wk_mask = 0;
 		u32 padconf = 0;
 
+		/* XXX These PRM accesses do not belong here */
 		uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
 		uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
 		switch (uart->num) {
@@ -694,16 +695,16 @@ void __init omap_serial_early_init(void)
 
 /**
  * omap_serial_init_port() - initialize single serial port
- * @port: serial port number (0-3)
+ * @bdata: port specific board data pointer
  *
- * This function initialies serial driver for given @port only.
+ * This function initialies serial driver for given port only.
  * Platforms can call this function instead of omap_serial_init()
  * if they don't plan to use all available UARTs as serial ports.
  *
  * Don't mix calls to omap_serial_init_port() and omap_serial_init(),
  * use only one of the two.
  */
-void __init omap_serial_init_port(int port)
+void __init omap_serial_init_port(struct omap_board_data *bdata)
 {
 	struct omap_uart_state *uart;
 	struct omap_hwmod *oh;
@@ -721,13 +722,15 @@ void __init omap_serial_init_port(int port)
 	struct omap_uart_port_info omap_up;
 #endif
 
-	if (WARN_ON(port < 0))
+	if (WARN_ON(!bdata))
+		return;
+	if (WARN_ON(bdata->id < 0))
 		return;
-	if (WARN_ON(port >= num_uarts))
+	if (WARN_ON(bdata->id >= num_uarts))
 		return;
 
 	list_for_each_entry(uart, &uart_list, node)
-		if (port == uart->num)
+		if (bdata->id == uart->num)
 			break;
 
 	oh = uart->oh;
@@ -799,6 +802,8 @@ void __init omap_serial_init_port(int port)
 	WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
 	     name, oh->name);
 
+	oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
+
 	uart->irq = oh->mpu_irqs[0].irq;
 	uart->regshift = 2;
 	uart->mapbase = oh->slaves[0]->addr->pa_start;
@@ -807,6 +812,8 @@ void __init omap_serial_init_port(int port)
 
 	oh->dev_attr = uart;
 
+	acquire_console_sem(); /* in case the earlycon is on the UART */
+
 	/*
 	 * Because of early UART probing, UART did not get idled
 	 * on init.  Now that omap_device is ready, ensure full idle
@@ -831,6 +838,8 @@ void __init omap_serial_init_port(int port)
 	omap_uart_block_sleep(uart);
 	uart->timeout = DEFAULT_TIMEOUT;
 
+	release_console_sem();
+
 	if ((cpu_is_omap34xx() && uart->padconf) ||
 	    (uart->wk_en && uart->wk_mask)) {
 		device_init_wakeup(&od->pdev.dev, true);
@@ -852,7 +861,14 @@ void __init omap_serial_init_port(int port)
 void __init omap_serial_init(void)
 {
 	struct omap_uart_state *uart;
+	struct omap_board_data bdata;
 
-	list_for_each_entry(uart, &uart_list, node)
-		omap_serial_init_port(uart->num);
+	list_for_each_entry(uart, &uart_list, node) {
+		bdata.id = uart->num;
+		bdata.flags = 0;
+		bdata.pads = NULL;
+		bdata.pads_cnt = 0;
+		omap_serial_init_port(&bdata);
+
+	}
 }
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 2fb205a7f28..98d8232808b 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-omap2/sleep.S
- *
  * (C) Copyright 2007
  * Texas Instruments
  * Karthik Dasu <karthik-dp@ti.com>
@@ -26,28 +24,35 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <plat/sram.h>
 #include <mach/io.h>
 
-#include "cm.h"
-#include "prm.h"
+#include "cm2xxx_3xxx.h"
+#include "prm2xxx_3xxx.h"
 #include "sdrc.h"
 #include "control.h"
 
-#define SDRC_SCRATCHPAD_SEM_V	0xfa00291c
-
-#define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
-				OMAP3430_PM_PREPWSTST)
-#define PM_PREPWSTST_CORE_P	0x48306AE8
-#define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
-				OMAP3430_PM_PREPWSTST)
+/*
+ * Registers access definitions
+ */
+#define SDRC_SCRATCHPAD_SEM_OFFS	0xc
+#define SDRC_SCRATCHPAD_SEM_V	OMAP343X_SCRATCHPAD_REGADDR\
+					(SDRC_SCRATCHPAD_SEM_OFFS)
+#define PM_PREPWSTST_CORE_P	OMAP3430_PRM_BASE + CORE_MOD +\
+					OMAP3430_PM_PREPWSTST
 #define PM_PWSTCTRL_MPU_P	OMAP3430_PRM_BASE + MPU_MOD + OMAP2_PM_PWSTCTRL
 #define CM_IDLEST1_CORE_V	OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
-#define SRAM_BASE_P		0x40200000
-#define CONTROL_STAT		0x480022F0
-#define SCRATCHPAD_MEM_OFFS	0x310 /* Move this as correct place is
-				       * available */
-#define SCRATCHPAD_BASE_P	(OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
-						+ SCRATCHPAD_MEM_OFFS)
+#define CM_IDLEST_CKGEN_V	OMAP34XX_CM_REGADDR(PLL_MOD, CM_IDLEST)
+#define SRAM_BASE_P		OMAP3_SRAM_PA
+#define CONTROL_STAT		OMAP343X_CTRL_BASE + OMAP343X_CONTROL_STATUS
+#define CONTROL_MEM_RTA_CTRL	(OMAP343X_CTRL_BASE +\
+					OMAP36XX_CONTROL_MEM_RTA_CTRL)
+
+/* Move this as correct place is available */
+#define SCRATCHPAD_MEM_OFFS	0x310
+#define SCRATCHPAD_BASE_P	(OMAP343X_CTRL_BASE +\
+					OMAP343X_CONTROL_MEM_WKUP +\
+					SCRATCHPAD_MEM_OFFS)
 #define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
 #define SDRC_SYSCONFIG_P	(OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
 #define SDRC_MR_0_P		(OMAP343X_SDRC_BASE + SDRC_MR_0)
@@ -59,48 +64,38 @@
 #define SDRC_DLLA_STATUS_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 #define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
-        .text
-/* Function to acquire the semaphore in scratchpad */
-ENTRY(lock_scratchpad_sem)
-	stmfd	sp!, {lr}	@ save registers on stack
-wait_sem:
-	mov	r0,#1
-	ldr	r1, sdrc_scratchpad_sem
-wait_loop:
-	ldr	r2, [r1]	@ load the lock value
-	cmp	r2, r0		@ is the lock free ?
-	beq	wait_loop	@ not free...
-	swp	r2, r0, [r1]	@ semaphore free so lock it and proceed
-	cmp	r2, r0		@ did we succeed ?
-	beq	wait_sem	@ no - try again
-	ldmfd	sp!, {pc}	@ restore regs and return
-sdrc_scratchpad_sem:
-        .word SDRC_SCRATCHPAD_SEM_V
-ENTRY(lock_scratchpad_sem_sz)
-        .word   . - lock_scratchpad_sem
-
-        .text
-/* Function to release the scratchpad semaphore */
-ENTRY(unlock_scratchpad_sem)
-	stmfd	sp!, {lr}	@ save registers on stack
-	ldr	r3, sdrc_scratchpad_sem
-	mov	r2,#0
-	str	r2,[r3]
-	ldmfd	sp!, {pc}	@ restore regs and return
-ENTRY(unlock_scratchpad_sem_sz)
-        .word   . - unlock_scratchpad_sem
+
+/*
+ * API functions
+ */
+
+/*
+ * The "get_*restore_pointer" functions are used to provide a
+ * physical restore address where the ROM code jumps while waking
+ * up from MPU OFF/OSWR state.
+ * The restore pointer is stored into the scratchpad.
+ */
 
 	.text
 /* Function call to get the restore pointer for resume from OFF */
 ENTRY(get_restore_pointer)
-        stmfd   sp!, {lr}     @ save registers on stack
+	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore
-        ldmfd   sp!, {pc}     @ restore regs and return
+	ldmfd	sp!, {pc}	@ restore regs and return
 ENTRY(get_restore_pointer_sz)
-        .word   . - get_restore_pointer
+	.word	. - get_restore_pointer
 
 	.text
-/* Function call to get the restore pointer for for ES3 to resume from OFF */
+/* Function call to get the restore pointer for 3630 resume from OFF */
+ENTRY(get_omap3630_restore_pointer)
+	stmfd	sp!, {lr}	@ save registers on stack
+	adr	r0, restore_3630
+	ldmfd	sp!, {pc}	@ restore regs and return
+ENTRY(get_omap3630_restore_pointer_sz)
+	.word	. - get_omap3630_restore_pointer
+
+	.text
+/* Function call to get the restore pointer for ES3 to resume from OFF */
 ENTRY(get_es3_restore_pointer)
 	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore_es3
@@ -108,54 +103,23 @@ ENTRY(get_es3_restore_pointer)
 ENTRY(get_es3_restore_pointer_sz)
 	.word	. - get_es3_restore_pointer
 
-ENTRY(es3_sdrc_fix)
-	ldr	r4, sdrc_syscfg		@ get config addr
-	ldr	r5, [r4]		@ get value
-	tst	r5, #0x100		@ is part access blocked
-	it	eq
-	biceq	r5, r5, #0x100		@ clear bit if set
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_mr_0		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_emr2_0		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_manual_0	@ get config addr
-	mov	r5, #0x2		@ autorefresh command
-	str	r5, [r4]		@ kick off refreshes
-	ldr	r4, sdrc_mr_1		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_emr2_1		@ get config addr
-	ldr	r5, [r4]		@ get value
-	str	r5, [r4]		@ write back change
-	ldr	r4, sdrc_manual_1	@ get config addr
-	mov	r5, #0x2		@ autorefresh command
-	str	r5, [r4]		@ kick off refreshes
-	bx	lr
-sdrc_syscfg:
-	.word	SDRC_SYSCONFIG_P
-sdrc_mr_0:
-	.word	SDRC_MR_0_P
-sdrc_emr2_0:
-	.word	SDRC_EMR2_0_P
-sdrc_manual_0:
-	.word	SDRC_MANUAL_0_P
-sdrc_mr_1:
-	.word	SDRC_MR_1_P
-sdrc_emr2_1:
-	.word	SDRC_EMR2_1_P
-sdrc_manual_1:
-	.word	SDRC_MANUAL_1_P
-ENTRY(es3_sdrc_fix_sz)
-	.word	. - es3_sdrc_fix
+	.text
+/*
+ * L2 cache needs to be toggled for stable OFF mode functionality on 3630.
+ * This function sets up a flag that will allow for this toggling to take
+ * place on 3630. Hopefully some version in the future may not need this.
+ */
+ENTRY(enable_omap3630_toggle_l2_on_restore)
+	stmfd	sp!, {lr}	@ save registers on stack
+	/* Setup so that we will disable and enable l2 */
+	mov	r1, #0x1
+	str	r1, l2dis_3630
+	ldmfd	sp!, {pc}	@ restore regs and return
 
+	.text
 /* Function to call rom code to save secure ram context */
 ENTRY(save_secure_ram_context)
 	stmfd	sp!, {r1-r12, lr}	@ save registers on stack
-save_secure_ram_debug:
-	/* b save_secure_ram_debug */	@ enable to debug save code
 	adr	r3, api_params		@ r3 points to parameters
 	str	r0, [r3,#0x4]		@ r0 has sdram address
 	ldr	r12, high_mask
@@ -185,35 +149,162 @@ ENTRY(save_secure_ram_context_sz)
 	.word	. - save_secure_ram_context
 
 /*
+ * ======================
+ * == Idle entry point ==
+ * ======================
+ */
+
+/*
  * Forces OMAP into idle state
  *
- * omap34xx_suspend() - This bit of code just executes the WFI
- * for normal idles.
+ * omap34xx_cpu_suspend() - This bit of code saves the CPU context if needed
+ * and executes the WFI instruction. Calling WFI effectively changes the
+ * power domains states to the desired target power states.
+ *
  *
- * Note: This code get's copied to internal SRAM at boot. When the OMAP
- *	 wakes up it continues execution at the point it went to sleep.
+ * Notes:
+ * - this code gets copied to internal SRAM at boot and after wake-up
+ *   from OFF mode. The execution pointer in SRAM is _omap_sram_idle.
+ * - when the OMAP wakes up it continues at different execution points
+ *   depending on the low power mode (non-OFF vs OFF modes),
+ *   cf. 'Resume path for xxx mode' comments.
  */
 ENTRY(omap34xx_cpu_suspend)
-	stmfd	sp!, {r0-r12, lr}		@ save registers on stack
-loop:
-	/*b	loop*/	@Enable to debug by stepping through code
-	/* r0 contains restore pointer in sdram */
-	/* r1 contains information about saving context */
-	ldr     r4, sdrc_power          @ read the SDRC_POWER register
-	ldr     r5, [r4]                @ read the contents of SDRC_POWER
-	orr     r5, r5, #0x40           @ enable self refresh on idle req
-	str     r5, [r4]                @ write back to SDRC_POWER register
+	stmfd	sp!, {r0-r12, lr}	@ save registers on stack
 
+	/*
+	 * r0 contains restore pointer in sdram
+	 * r1 contains information about saving context:
+	 *   0 - No context lost
+	 *   1 - Only L1 and logic lost
+	 *   2 - Only L2 lost
+	 *   3 - Both L1 and L2 lost
+	 */
+
+	/* Directly jump to WFI is the context save is not required */
 	cmp	r1, #0x0
-	/* If context save is required, do that and execute wfi */
-	bne	save_context_wfi
+	beq	omap3_do_wfi
+
+	/* Otherwise fall through to the save context code */
+save_context_wfi:
+	mov	r8, r0			@ Store SDRAM address in r8
+	mrc	p15, 0, r5, c1, c0, 1	@ Read Auxiliary Control Register
+	mov	r4, #0x1		@ Number of parameters for restore call
+	stmia	r8!, {r4-r5}		@ Push parameters for restore call
+	mrc	p15, 1, r5, c9, c0, 2	@ Read L2 AUX ctrl register
+	stmia	r8!, {r4-r5}		@ Push parameters for restore call
+
+        /* Check what that target sleep state is from r1 */
+	cmp	r1, #0x2		@ Only L2 lost, no need to save context
+	beq	clean_caches
+
+l1_logic_lost:
+	/* Store sp and spsr to SDRAM */
+	mov	r4, sp
+	mrs	r5, spsr
+	mov	r6, lr
+	stmia	r8!, {r4-r6}
+	/* Save all ARM registers */
+	/* Coprocessor access control register */
+	mrc	p15, 0, r6, c1, c0, 2
+	stmia	r8!, {r6}
+	/* TTBR0, TTBR1 and Translation table base control */
+	mrc	p15, 0, r4, c2, c0, 0
+	mrc	p15, 0, r5, c2, c0, 1
+	mrc	p15, 0, r6, c2, c0, 2
+	stmia	r8!, {r4-r6}
+	/*
+	 * Domain access control register, data fault status register,
+	 * and instruction fault status register
+	 */
+	mrc	p15, 0, r4, c3, c0, 0
+	mrc	p15, 0, r5, c5, c0, 0
+	mrc	p15, 0, r6, c5, c0, 1
+	stmia	r8!, {r4-r6}
+	/*
+	 * Data aux fault status register, instruction aux fault status,
+	 * data fault address register and instruction fault address register
+	 */
+	mrc	p15, 0, r4, c5, c1, 0
+	mrc	p15, 0, r5, c5, c1, 1
+	mrc	p15, 0, r6, c6, c0, 0
+	mrc	p15, 0, r7, c6, c0, 2
+	stmia	r8!, {r4-r7}
+	/*
+	 * user r/w thread and process ID, user r/o thread and process ID,
+	 * priv only thread and process ID, cache size selection
+	 */
+	mrc	p15, 0, r4, c13, c0, 2
+	mrc	p15, 0, r5, c13, c0, 3
+	mrc	p15, 0, r6, c13, c0, 4
+	mrc	p15, 2, r7, c0, c0, 0
+	stmia	r8!, {r4-r7}
+	/* Data TLB lockdown, instruction TLB lockdown registers */
+	mrc	p15, 0, r5, c10, c0, 0
+	mrc	p15, 0, r6, c10, c0, 1
+	stmia	r8!, {r5-r6}
+	/* Secure or non secure vector base address, FCSE PID, Context PID*/
+	mrc	p15, 0, r4, c12, c0, 0
+	mrc	p15, 0, r5, c13, c0, 0
+	mrc	p15, 0, r6, c13, c0, 1
+	stmia	r8!, {r4-r6}
+	/* Primary remap, normal remap registers */
+	mrc	p15, 0, r4, c10, c2, 0
+	mrc	p15, 0, r5, c10, c2, 1
+	stmia	r8!,{r4-r5}
+
+	/* Store current cpsr*/
+	mrs	r2, cpsr
+	stmia	r8!, {r2}
+
+	mrc	p15, 0, r4, c1, c0, 0
+	/* save control register */
+	stmia	r8!, {r4}
+
+clean_caches:
+	/*
+	 * Clean Data or unified cache to POU
+	 * How to invalidate only L1 cache???? - #FIX_ME#
+	 * mcr	p15, 0, r11, c7, c11, 1
+	 */
+	cmp	r1, #0x1 		@ Check whether L2 inval is required
+	beq	omap3_do_wfi
+
+clean_l2:
+	/*
+	 * jump out to kernel flush routine
+	 *  - reuse that code is better
+	 *  - it executes in a cached space so is faster than refetch per-block
+	 *  - should be faster and will change with kernel
+	 *  - 'might' have to copy address, load and jump to it
+	 */
+	ldr	r1, kernel_flush
+	mov	lr, pc
+	bx	r1
+
+omap3_do_wfi:
+	ldr	r4, sdrc_power		@ read the SDRC_POWER register
+	ldr	r5, [r4]		@ read the contents of SDRC_POWER
+	orr	r5, r5, #0x40		@ enable self refresh on idle req
+	str	r5, [r4]		@ write back to SDRC_POWER register
+
 	/* Data memory barrier and Data sync barrier */
 	mov	r1, #0
 	mcr	p15, 0, r1, c7, c10, 4
 	mcr	p15, 0, r1, c7, c10, 5
 
+/*
+ * ===================================
+ * == WFI instruction => Enter idle ==
+ * ===================================
+ */
 	wfi				@ wait for interrupt
 
+/*
+ * ===================================
+ * == Resume path for non-OFF modes ==
+ * ===================================
+ */
 	nop
 	nop
 	nop
@@ -226,9 +317,30 @@ loop:
 	nop
 	bl wait_sdrc_ok
 
-	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+/*
+ * ===================================
+ * == Exit point from non-OFF modes ==
+ * ===================================
+ */
+	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
+
+
+/*
+ * ==============================
+ * == Resume path for OFF mode ==
+ * ==============================
+ */
+
+/*
+ * The restore_* functions are called by the ROM code
+ *  when back from WFI in OFF mode.
+ * Cf. the get_*restore_pointer functions.
+ *
+ *  restore_es3: applies to 34xx >= ES3.0
+ *  restore_3630: applies to 36xx
+ *  restore: common code for 3xxx
+ */
 restore_es3:
-	/*b restore_es3*/		@ Enable to debug restore code
 	ldr	r5, pm_prepwstst_core_p
 	ldr	r4, [r5]
 	and	r4, r4, #0x3
@@ -245,82 +357,117 @@ copy_to_sram:
 	bne	copy_to_sram
 	ldr	r1, sram_base
 	blx	r1
+	b	restore
+
+restore_3630:
+	ldr	r1, pm_prepwstst_core_p
+	ldr	r2, [r1]
+	and	r2, r2, #0x3
+	cmp	r2, #0x0	@ Check if previous power state of CORE is OFF
+	bne	restore
+	/* Disable RTA before giving control */
+	ldr	r1, control_mem_rta
+	mov	r2, #OMAP36XX_RTA_DISABLE
+	str	r2, [r1]
+
+	/* Fall through to common code for the remaining logic */
+
 restore:
-	/* b restore*/  @ Enable to debug restore code
-        /* Check what was the reason for mpu reset and store the reason in r9*/
-        /* 1 - Only L1 and logic lost */
-        /* 2 - Only L2 lost - In this case, we wont be here */
-        /* 3 - Both L1 and L2 lost */
-	ldr     r1, pm_pwstctrl_mpu
+	/*
+	 * Check what was the reason for mpu reset and store the reason in r9:
+	 *  0 - No context lost
+	 *  1 - Only L1 and logic lost
+	 *  2 - Only L2 lost - In this case, we wont be here
+	 *  3 - Both L1 and L2 lost
+	 */
+	ldr	r1, pm_pwstctrl_mpu
 	ldr	r2, [r1]
-	and     r2, r2, #0x3
-	cmp     r2, #0x0	@ Check if target power state was OFF or RET
-        moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
+	and	r2, r2, #0x3
+	cmp	r2, #0x0	@ Check if target power state was OFF or RET
+	moveq	r9, #0x3	@ MPU OFF => L1 and L2 lost
 	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
 	bne	logic_l1_restore
+
+	ldr	r0, l2dis_3630
+	cmp	r0, #0x1	@ should we disable L2 on 3630?
+	bne	skipl2dis
+	mrc	p15, 0, r0, c1, c0, 1
+	bic	r0, r0, #2	@ disable L2 cache
+	mcr	p15, 0, r0, c1, c0, 1
+skipl2dis:
 	ldr	r0, control_stat
 	ldr	r1, [r0]
 	and	r1, #0x700
 	cmp	r1, #0x300
 	beq	l2_inv_gp
-	mov	r0, #40		@ set service ID for PPA
-	mov	r12, r0		@ copy secure Service ID in r12
-	mov	r1, #0		@ set task id for ROM code in r1
-	mov	r2, #4		@ set some flags in r2, r6
+	mov	r0, #40			@ set service ID for PPA
+	mov	r12, r0			@ copy secure Service ID in r12
+	mov	r1, #0			@ set task id for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
 	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
 	/* Write to Aux control register to set some bits */
-	mov	r0, #42		@ set service ID for PPA
-	mov	r12, r0		@ copy secure Service ID in r12
-	mov	r1, #0		@ set task id for ROM code in r1
-	mov	r2, #4		@ set some flags in r2, r6
+	mov	r0, #42			@ set service ID for PPA
+	mov	r12, r0			@ copy secure Service ID in r12
+	mov	r1, #0			@ set task id for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
 	ldr	r4, scratchpad_base
-	ldr	r3, [r4, #0xBC]	@ r3 points to parameters
+	ldr	r3, [r4, #0xBC]		@ r3 points to parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
 
 #ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
 	/* Restore L2 aux control register */
-	@ set service ID for PPA
+					@ set service ID for PPA
 	mov	r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
-	mov	r12, r0		@ copy service ID in r12
-	mov	r1, #0		@ set task ID for ROM code in r1
-	mov	r2, #4		@ set some flags in r2, r6
+	mov	r12, r0			@ copy service ID in r12
+	mov	r1, #0			@ set task ID for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
 	mov	r6, #0xff
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4, #0xBC]
-	adds	r3, r3, #8	@ r3 points to parameters
+	adds	r3, r3, #8		@ r3 points to parameters
 	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
 	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
 	.word	0xE1600071		@ call SMI monitor (smi #1)
 #endif
 	b	logic_l1_restore
+
 l2_inv_api_params:
-	.word   0x1, 0x00
+	.word	0x1, 0x00
 l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
-	mov r12, #0x1                         @ set up to invalide L2
-smi:    .word 0xE1600070		@ Call SMI monitor (smieq)
+	mov r12, #0x1			@ set up to invalidate L2
+	.word 0xE1600070		@ Call SMI monitor (smieq)
 	/* Write to Aux control register to set some bits */
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
 	ldr	r0, [r3,#4]
 	mov	r12, #0x3
-	.word 0xE1600070	@ Call SMI monitor (smieq)
+	.word	0xE1600070		@ Call SMI monitor (smieq)
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
 	ldr	r0, [r3,#12]
 	mov	r12, #0x2
-	.word 0xE1600070	@ Call SMI monitor (smieq)
+	.word	0xE1600070		@ Call SMI monitor (smieq)
 logic_l1_restore:
+	ldr	r1, l2dis_3630
+	cmp	r1, #0x1		@ Test if L2 re-enable needed on 3630
+	bne	skipl2reen
+	mrc	p15, 0, r1, c1, c0, 1
+	orr	r1, r1, #2		@ re-enable L2 cache
+	mcr	p15, 0, r1, c1, c0, 1
+skipl2reen:
 	mov	r1, #0
-	/* Invalidate all instruction caches to PoU
-	 * and flush branch target cache */
+	/*
+	 * Invalidate all instruction caches to PoU
+	 * and flush branch target cache
+	 */
 	mcr	p15, 0, r1, c7, c5, 0
 
 	ldr	r4, scratchpad_base
@@ -341,33 +488,33 @@ logic_l1_restore:
 	MCR p15, 0, r6, c2, c0, 1
 	/* Translation table base control register */
 	MCR p15, 0, r7, c2, c0, 2
-	/*domain access Control Register */
+	/* Domain access Control Register */
 	MCR p15, 0, r8, c3, c0, 0
-	/* data fault status Register */
+	/* Data fault status Register */
 	MCR p15, 0, r9, c5, c0, 0
 
-	ldmia  r3!,{r4-r8}
-	/* instruction fault status Register */
+	ldmia	r3!,{r4-r8}
+	/* Instruction fault status Register */
 	MCR p15, 0, r4, c5, c0, 1
-	/*Data Auxiliary Fault Status Register */
+	/* Data Auxiliary Fault Status Register */
 	MCR p15, 0, r5, c5, c1, 0
-	/*Instruction Auxiliary Fault Status Register*/
+	/* Instruction Auxiliary Fault Status Register*/
 	MCR p15, 0, r6, c5, c1, 1
-	/*Data Fault Address Register */
+	/* Data Fault Address Register */
 	MCR p15, 0, r7, c6, c0, 0
-	/*Instruction Fault Address Register*/
+	/* Instruction Fault Address Register*/
 	MCR p15, 0, r8, c6, c0, 2
-	ldmia  r3!,{r4-r7}
+	ldmia	r3!,{r4-r7}
 
-	/* user r/w thread and process ID */
+	/* User r/w thread and process ID */
 	MCR p15, 0, r4, c13, c0, 2
-	/* user ro thread and process ID */
+	/* User ro thread and process ID */
 	MCR p15, 0, r5, c13, c0, 3
-	/*Privileged only thread and process ID */
+	/* Privileged only thread and process ID */
 	MCR p15, 0, r6, c13, c0, 4
-	/* cache size selection */
+	/* Cache size selection */
 	MCR p15, 2, r7, c0, c0, 0
-	ldmia  r3!,{r4-r8}
+	ldmia	r3!,{r4-r8}
 	/* Data TLB lockdown registers */
 	MCR p15, 0, r4, c10, c0, 0
 	/* Instruction TLB lockdown registers */
@@ -379,26 +526,27 @@ logic_l1_restore:
 	/* Context PID */
 	MCR p15, 0, r8, c13, c0, 1
 
-	ldmia  r3!,{r4-r5}
-	/* primary memory remap register */
+	ldmia	r3!,{r4-r5}
+	/* Primary memory remap register */
 	MCR p15, 0, r4, c10, c2, 0
-	/*normal memory remap register */
+	/* Normal memory remap register */
 	MCR p15, 0, r5, c10, c2, 1
 
 	/* Restore cpsr */
-	ldmia	r3!,{r4}	/*load CPSR from SDRAM*/
-	msr	cpsr, r4	/*store cpsr */
+	ldmia	r3!,{r4}		@ load CPSR from SDRAM
+	msr	cpsr, r4		@ store cpsr
 
 	/* Enabling MMU here */
-	mrc	p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
-	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+	mrc	p15, 0, r7, c2, c0, 2 	@ Read TTBRControl
+	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
 	and	r7, #0x7
 	cmp	r7, #0x0
 	beq	usettbr0
 ttbr_error:
-	/* More work needs to be done to support N[0:2] value other than 0
-	* So looping here so that the error can be detected
-	*/
+	/*
+	 * More work needs to be done to support N[0:2] value other than 0
+	 * So looping here so that the error can be detected
+	 */
 	b	ttbr_error
 usettbr0:
 	mrc	p15, 0, r2, c2, c0, 0
@@ -406,21 +554,25 @@ usettbr0:
 	and	r2, r5
 	mov	r4, pc
 	ldr	r5, table_index_mask
-	and	r4, r5 /* r4 = 31 to 20 bits of pc */
+	and	r4, r5			@ r4 = 31 to 20 bits of pc
 	/* Extract the value to be written to table entry */
 	ldr	r1, table_entry
-	add	r1, r1, r4 /* r1 has value to be written to table entry*/
+	/* r1 has the value to be written to table entry*/
+	add	r1, r1, r4
 	/* Getting the address of table entry to modify */
 	lsr	r4, #18
-	add	r2, r4 /* r2 has the location which needs to be modified */
+	/* r2 has the location which needs to be modified */
+	add	r2, r4
 	/* Storing previous entry of location being modified */
 	ldr	r5, scratchpad_base
 	ldr	r4, [r2]
 	str	r4, [r5, #0xC0]
 	/* Modify the table entry */
 	str	r1, [r2]
-	/* Storing address of entry being modified
-	 * - will be restored after enabling MMU */
+	/*
+	 * Storing address of entry being modified
+	 * - will be restored after enabling MMU
+	 */
 	ldr	r5, scratchpad_base
 	str	r2, [r5, #0xC4]
 
@@ -429,8 +581,11 @@ usettbr0:
 	mcr	p15, 0, r0, c7, c5, 6	@ Invalidate branch predictor array
 	mcr	p15, 0, r0, c8, c5, 0	@ Invalidate instruction TLB
 	mcr	p15, 0, r0, c8, c6, 0	@ Invalidate data TLB
-	/* Restore control register  but dont enable caches here*/
-	/* Caches will be enabled after restoring MMU table entry */
+	/*
+	 * Restore control register. This enables the MMU.
+	 * The caches and prediction are not enabled here, they
+	 * will be enabled after restoring the MMU table entry.
+	 */
 	ldmia	r3!, {r4}
 	/* Store previous value of control register in scratchpad */
 	str	r4, [r5, #0xC8]
@@ -438,212 +593,144 @@ usettbr0:
 	and	r4, r2
 	mcr	p15, 0, r4, c1, c0, 0
 
-	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
-save_context_wfi:
-	/*b	save_context_wfi*/	@ enable to debug save code
-	mov	r8, r0 /* Store SDRAM address in r8 */
-	mrc	p15, 0, r5, c1, c0, 1	@ Read Auxiliary Control Register
-	mov	r4, #0x1		@ Number of parameters for restore call
-	stmia	r8!, {r4-r5}		@ Push parameters for restore call
-	mrc	p15, 1, r5, c9, c0, 2	@ Read L2 AUX ctrl register
-	stmia	r8!, {r4-r5}		@ Push parameters for restore call
-        /* Check what that target sleep state is:stored in r1*/
-        /* 1 - Only L1 and logic lost */
-        /* 2 - Only L2 lost */
-        /* 3 - Both L1 and L2 lost */
-	cmp	r1, #0x2 /* Only L2 lost */
-	beq	clean_l2
-	cmp	r1, #0x1 /* L2 retained */
-	/* r9 stores whether to clean L2 or not*/
-	moveq	r9, #0x0 /* Dont Clean L2 */
-	movne	r9, #0x1 /* Clean L2 */
-l1_logic_lost:
-	/* Store sp and spsr to SDRAM */
-	mov	r4, sp
-	mrs	r5, spsr
-	mov	r6, lr
-	stmia	r8!, {r4-r6}
-	/* Save all ARM registers */
-	/* Coprocessor access control register */
-	mrc	p15, 0, r6, c1, c0, 2
-	stmia	r8!, {r6}
-	/* TTBR0, TTBR1 and Translation table base control */
-	mrc	p15, 0, r4, c2, c0, 0
-	mrc	p15, 0, r5, c2, c0, 1
-	mrc	p15, 0, r6, c2, c0, 2
-	stmia	r8!, {r4-r6}
-	/* Domain access control register, data fault status register,
-	and instruction fault status register */
-	mrc	p15, 0, r4, c3, c0, 0
-	mrc	p15, 0, r5, c5, c0, 0
-	mrc	p15, 0, r6, c5, c0, 1
-	stmia	r8!, {r4-r6}
-	/* Data aux fault status register, instruction aux fault status,
-	datat fault address register and instruction fault address register*/
-	mrc	p15, 0, r4, c5, c1, 0
-	mrc	p15, 0, r5, c5, c1, 1
-	mrc	p15, 0, r6, c6, c0, 0
-	mrc	p15, 0, r7, c6, c0, 2
-	stmia	r8!, {r4-r7}
-	/* user r/w thread and process ID, user r/o thread and process ID,
-	priv only thread and process ID, cache size selection */
-	mrc	p15, 0, r4, c13, c0, 2
-	mrc	p15, 0, r5, c13, c0, 3
-	mrc	p15, 0, r6, c13, c0, 4
-	mrc	p15, 2, r7, c0, c0, 0
-	stmia	r8!, {r4-r7}
-	/* Data TLB lockdown, instruction TLB lockdown registers */
-	mrc	p15, 0, r5, c10, c0, 0
-	mrc	p15, 0, r6, c10, c0, 1
-	stmia	r8!, {r5-r6}
-	/* Secure or non secure vector base address, FCSE PID, Context PID*/
-	mrc	p15, 0, r4, c12, c0, 0
-	mrc	p15, 0, r5, c13, c0, 0
-	mrc	p15, 0, r6, c13, c0, 1
-	stmia	r8!, {r4-r6}
-	/* Primary remap, normal remap registers */
-	mrc	p15, 0, r4, c10, c2, 0
-	mrc	p15, 0, r5, c10, c2, 1
-	stmia	r8!,{r4-r5}
+/*
+ * ==============================
+ * == Exit point from OFF mode ==
+ * ==============================
+ */
+	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
-	/* Store current cpsr*/
-	mrs	r2, cpsr
-	stmia	r8!, {r2}
 
-	mrc	p15, 0, r4, c1, c0, 0
-	/* save control register */
-	stmia	r8!, {r4}
-clean_caches:
-	/* Clean Data or unified cache to POU*/
-	/* How to invalidate only L1 cache???? - #FIX_ME# */
-	/* mcr	p15, 0, r11, c7, c11, 1 */
-	cmp	r9, #1 /* Check whether L2 inval is required or not*/
-	bne	skip_l2_inval
-clean_l2:
-	/* read clidr */
-	mrc     p15, 1, r0, c0, c0, 1
-	/* extract loc from clidr */
-	ands    r3, r0, #0x7000000
-	/* left align loc bit field */
-	mov     r3, r3, lsr #23
-	/* if loc is 0, then no need to clean */
-	beq     finished
-	/* start clean at cache level 0 */
-	mov     r10, #0
-loop1:
-	/* work out 3x current cache level */
-	add     r2, r10, r10, lsr #1
-	/* extract cache type bits from clidr*/
-	mov     r1, r0, lsr r2
-	/* mask of the bits for current cache only */
-	and     r1, r1, #7
-	/* see what cache we have at this level */
-	cmp     r1, #2
-	/* skip if no cache, or just i-cache */
-	blt     skip
-	/* select current cache level in cssr */
-	mcr     p15, 2, r10, c0, c0, 0
-	/* isb to sych the new cssr&csidr */
-	isb
-	/* read the new csidr */
-	mrc     p15, 1, r1, c0, c0, 0
-	/* extract the length of the cache lines */
-	and     r2, r1, #7
-	/* add 4 (line length offset) */
-	add     r2, r2, #4
-	ldr     r4, assoc_mask
-	/* find maximum number on the way size */
-	ands    r4, r4, r1, lsr #3
-	/* find bit position of way size increment */
-	clz     r5, r4
-	ldr     r7, numset_mask
-	/* extract max number of the index size*/
-	ands    r7, r7, r1, lsr #13
-loop2:
-	mov     r9, r4
-	/* create working copy of max way size*/
-loop3:
-	/* factor way and cache number into r11 */
-	orr     r11, r10, r9, lsl r5
-	/* factor index number into r11 */
-	orr     r11, r11, r7, lsl r2
-	/*clean & invalidate by set/way */
-	mcr     p15, 0, r11, c7, c10, 2
-	/* decrement the way*/
-	subs    r9, r9, #1
-	bge     loop3
-	/*decrement the index */
-	subs    r7, r7, #1
-	bge     loop2
-skip:
-	add     r10, r10, #2
-	/* increment cache number */
-	cmp     r3, r10
-	bgt     loop1
-finished:
-	/*swith back to cache level 0 */
-	mov     r10, #0
-	/* select current cache level in cssr */
-	mcr     p15, 2, r10, c0, c0, 0
-	isb
-skip_l2_inval:
-	/* Data memory barrier and Data sync barrier */
-	mov     r1, #0
-	mcr     p15, 0, r1, c7, c10, 4
-	mcr     p15, 0, r1, c7, c10, 5
+/*
+ * Internal functions
+ */
 
-	wfi                             @ wait for interrupt
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	bl wait_sdrc_ok
-	/* restore regs and return */
-	ldmfd   sp!, {r0-r12, pc}
+/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
+	.text
+ENTRY(es3_sdrc_fix)
+	ldr	r4, sdrc_syscfg		@ get config addr
+	ldr	r5, [r4]		@ get value
+	tst	r5, #0x100		@ is part access blocked
+	it	eq
+	biceq	r5, r5, #0x100		@ clear bit if set
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_mr_0		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_emr2_0		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_manual_0	@ get config addr
+	mov	r5, #0x2		@ autorefresh command
+	str	r5, [r4]		@ kick off refreshes
+	ldr	r4, sdrc_mr_1		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_emr2_1		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_manual_1	@ get config addr
+	mov	r5, #0x2		@ autorefresh command
+	str	r5, [r4]		@ kick off refreshes
+	bx	lr
+
+sdrc_syscfg:
+	.word	SDRC_SYSCONFIG_P
+sdrc_mr_0:
+	.word	SDRC_MR_0_P
+sdrc_emr2_0:
+	.word	SDRC_EMR2_0_P
+sdrc_manual_0:
+	.word	SDRC_MANUAL_0_P
+sdrc_mr_1:
+	.word	SDRC_MR_1_P
+sdrc_emr2_1:
+	.word	SDRC_EMR2_1_P
+sdrc_manual_1:
+	.word	SDRC_MANUAL_1_P
+ENTRY(es3_sdrc_fix_sz)
+	.word	. - es3_sdrc_fix
+
+/*
+ * This function implements the erratum ID i581 WA:
+ *  SDRC state restore before accessing the SDRAM
+ *
+ * Only used at return from non-OFF mode. For OFF
+ * mode the ROM code configures the SDRC and
+ * the DPLL before calling the restore code directly
+ * from DDR.
+ */
 
 /* Make sure SDRC accesses are ok */
 wait_sdrc_ok:
-        ldr     r4, cm_idlest1_core
-        ldr     r5, [r4]
-        and     r5, r5, #0x2
-        cmp     r5, #0
-        bne     wait_sdrc_ok
-        ldr     r4, sdrc_power
-        ldr     r5, [r4]
-        bic     r5, r5, #0x40
-        str     r5, [r4]
+
+/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
+	ldr	r4, cm_idlest_ckgen
+wait_dpll3_lock:
+	ldr	r5, [r4]
+	tst	r5, #1
+	beq	wait_dpll3_lock
+
+	ldr	r4, cm_idlest1_core
+wait_sdrc_ready:
+	ldr	r5, [r4]
+	tst	r5, #0x2
+	bne	wait_sdrc_ready
+	/* allow DLL powerdown upon hw idle req */
+	ldr	r4, sdrc_power
+	ldr	r5, [r4]
+	bic	r5, r5, #0x40
+	str	r5, [r4]
+
+is_dll_in_lock_mode:
+	/* Is dll in lock mode? */
+	ldr	r4, sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	tst	r5, #0x4
+	bxne	lr			@ Return if locked
+	/* wait till dll locks */
+wait_dll_lock_timed:
+	ldr	r4, wait_dll_lock_counter
+	add	r4, r4, #1
+	str	r4, wait_dll_lock_counter
+	ldr	r4, sdrc_dlla_status
+	/* Wait 20uS for lock */
+	mov	r6, #8
 wait_dll_lock:
-        /* Is dll in lock mode? */
-        ldr     r4, sdrc_dlla_ctrl
-        ldr     r5, [r4]
-        tst     r5, #0x4
-        bxne    lr
-        /* wait till dll locks */
-        ldr     r4, sdrc_dlla_status
-        ldr     r5, [r4]
-        and     r5, r5, #0x4
-        cmp     r5, #0x4
-        bne     wait_dll_lock
-        bx      lr
+	subs	r6, r6, #0x1
+	beq	kick_dll
+	ldr	r5, [r4]
+	and	r5, r5, #0x4
+	cmp	r5, #0x4
+	bne	wait_dll_lock
+	bx	lr			@ Return when locked
+
+	/* disable/reenable DLL if not locked */
+kick_dll:
+	ldr	r4, sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	mov	r6, r5
+	bic	r6, #(1<<3)		@ disable dll
+	str	r6, [r4]
+	dsb
+	orr	r6, r6, #(1<<3)		@ enable dll
+	str	r6, [r4]
+	dsb
+	ldr	r4, kick_counter
+	add	r4, r4, #1
+	str	r4, kick_counter
+	b	wait_dll_lock_timed
 
 cm_idlest1_core:
 	.word	CM_IDLEST1_CORE_V
+cm_idlest_ckgen:
+	.word	CM_IDLEST_CKGEN_V
 sdrc_dlla_status:
 	.word	SDRC_DLLA_STATUS_V
 sdrc_dlla_ctrl:
 	.word	SDRC_DLLA_CTRL_V
-pm_prepwstst_core:
-	.word	PM_PREPWSTST_CORE_V
 pm_prepwstst_core_p:
 	.word	PM_PREPWSTST_CORE_P
-pm_prepwstst_mpu:
-	.word	PM_PREPWSTST_MPU_V
 pm_pwstctrl_mpu:
 	.word	PM_PWSTCTRL_MPU_P
 scratchpad_base:
@@ -651,13 +738,7 @@ scratchpad_base:
 sram_base:
 	.word	SRAM_BASE_P + 0x8000
 sdrc_power:
-	.word SDRC_POWER_V
-clk_stabilize_delay:
-	.word 0x000001FF
-assoc_mask:
-	.word	0x3ff
-numset_mask:
-	.word	0x7fff
+	.word	SDRC_POWER_V
 ttbrbit_mask:
 	.word	0xFFFFC000
 table_index_mask:
@@ -668,5 +749,20 @@ cache_pred_disable_mask:
 	.word	0xFFFFE7FB
 control_stat:
 	.word	CONTROL_STAT
+control_mem_rta:
+	.word	CONTROL_MEM_RTA_CTRL
+kernel_flush:
+	.word	v7_flush_dcache_all
+l2dis_3630:
+	.word	0
+	/*
+	 * When exporting to userspace while the counters are in SRAM,
+	 * these 2 words need to be at the end to facilitate retrival!
+	 */
+kick_counter:
+	.word	0
+wait_dll_lock_counter:
+	.word	0
+
 ENTRY(omap34xx_cpu_suspend_sz)
 	.word	. - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c
new file mode 100644
index 00000000000..60e70552b4c
--- /dev/null
+++ b/arch/arm/mach-omap2/smartreflex-class3.c
@@ -0,0 +1,59 @@
+/*
+ * Smart reflex Class 3 specific implementations
+ *
+ * Author: Thara Gopinath       <thara@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/smartreflex.h>
+
+static int sr_class3_enable(struct voltagedomain *voltdm)
+{
+	unsigned long volt = omap_voltage_get_nom_volt(voltdm);
+
+	if (!volt) {
+		pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
+				__func__, voltdm->name);
+		return -ENODATA;
+	}
+
+	omap_vp_enable(voltdm);
+	return sr_enable(voltdm, volt);
+}
+
+static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
+{
+	omap_vp_disable(voltdm);
+	sr_disable(voltdm);
+	if (is_volt_reset)
+		omap_voltage_reset(voltdm);
+
+	return 0;
+}
+
+static int sr_class3_configure(struct voltagedomain *voltdm)
+{
+	return sr_configure_errgen(voltdm);
+}
+
+/* SR class3 structure */
+static struct omap_sr_class_data class3_data = {
+	.enable = sr_class3_enable,
+	.disable = sr_class3_disable,
+	.configure = sr_class3_configure,
+	.class_type = SR_CLASS3,
+};
+
+/* Smartreflex Class3 init API to be called from board file */
+static int __init sr_class3_init(void)
+{
+	pr_info("SmartReflex Class3 initialized\n");
+	return sr_register_class(&class3_data);
+}
+late_initcall(sr_class3_init);
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
new file mode 100644
index 00000000000..77ecebf3fae
--- /dev/null
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -0,0 +1,1029 @@
+/*
+ * OMAP SmartReflex Voltage Control
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+
+#include <plat/common.h>
+#include <plat/smartreflex.h>
+
+#include "pm.h"
+
+#define SMARTREFLEX_NAME_LEN	16
+#define NVALUE_NAME_LEN		40
+#define SR_DISABLE_TIMEOUT	200
+
+struct omap_sr {
+	int				srid;
+	int				ip_type;
+	int				nvalue_count;
+	bool				autocomp_active;
+	u32				clk_length;
+	u32				err_weight;
+	u32				err_minlimit;
+	u32				err_maxlimit;
+	u32				accum_data;
+	u32				senn_avgweight;
+	u32				senp_avgweight;
+	u32				senp_mod;
+	u32				senn_mod;
+	unsigned int			irq;
+	void __iomem			*base;
+	struct platform_device		*pdev;
+	struct list_head		node;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+};
+
+/* sr_list contains all the instances of smartreflex module */
+static LIST_HEAD(sr_list);
+
+static struct omap_sr_class_data *sr_class;
+static struct omap_sr_pmic_data *sr_pmic_data;
+
+static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value)
+{
+	__raw_writel(value, (sr->base + offset));
+}
+
+static inline void sr_modify_reg(struct omap_sr *sr, unsigned offset, u32 mask,
+					u32 value)
+{
+	u32 reg_val;
+	u32 errconfig_offs = 0, errconfig_mask = 0;
+
+	reg_val = __raw_readl(sr->base + offset);
+	reg_val &= ~mask;
+
+	/*
+	 * Smartreflex error config register is special as it contains
+	 * certain status bits which if written a 1 into means a clear
+	 * of those bits. So in order to make sure no accidental write of
+	 * 1 happens to those status bits, do a clear of them in the read
+	 * value. This mean this API doesn't rewrite values in these bits
+	 * if they are currently set, but does allow the caller to write
+	 * those bits.
+	 */
+	if (sr->ip_type == SR_TYPE_V1) {
+		errconfig_offs = ERRCONFIG_V1;
+		errconfig_mask = ERRCONFIG_STATUS_V1_MASK;
+	} else if (sr->ip_type == SR_TYPE_V2) {
+		errconfig_offs = ERRCONFIG_V2;
+		errconfig_mask = ERRCONFIG_VPBOUNDINTST_V2;
+	}
+
+	if (offset == errconfig_offs)
+		reg_val &= ~errconfig_mask;
+
+	reg_val |= value;
+
+	__raw_writel(reg_val, (sr->base + offset));
+}
+
+static inline u32 sr_read_reg(struct omap_sr *sr, unsigned offset)
+{
+	return __raw_readl(sr->base + offset);
+}
+
+static struct omap_sr *_sr_lookup(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr_info;
+
+	if (!voltdm) {
+		pr_err("%s: Null voltage domain passed!\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	list_for_each_entry(sr_info, &sr_list, node) {
+		if (voltdm == sr_info->voltdm)
+			return sr_info;
+	}
+
+	return ERR_PTR(-ENODATA);
+}
+
+static irqreturn_t sr_interrupt(int irq, void *data)
+{
+	struct omap_sr *sr_info = (struct omap_sr *)data;
+	u32 status = 0;
+
+	if (sr_info->ip_type == SR_TYPE_V1) {
+		/* Read the status bits */
+		status = sr_read_reg(sr_info, ERRCONFIG_V1);
+
+		/* Clear them by writing back */
+		sr_write_reg(sr_info, ERRCONFIG_V1, status);
+	} else if (sr_info->ip_type == SR_TYPE_V2) {
+		/* Read the status bits */
+		sr_read_reg(sr_info, IRQSTATUS);
+
+		/* Clear them by writing back */
+		sr_write_reg(sr_info, IRQSTATUS, status);
+	}
+
+	if (sr_class->class_type == SR_CLASS2 && sr_class->notify)
+		sr_class->notify(sr_info->voltdm, status);
+
+	return IRQ_HANDLED;
+}
+
+static void sr_set_clk_length(struct omap_sr *sr)
+{
+	struct clk *sys_ck;
+	u32 sys_clk_speed;
+
+	if (cpu_is_omap34xx())
+		sys_ck = clk_get(NULL, "sys_ck");
+	else
+		sys_ck = clk_get(NULL, "sys_clkin_ck");
+
+	if (IS_ERR(sys_ck)) {
+		dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n",
+			__func__);
+		return;
+	}
+	sys_clk_speed = clk_get_rate(sys_ck);
+	clk_put(sys_ck);
+
+	switch (sys_clk_speed) {
+	case 12000000:
+		sr->clk_length = SRCLKLENGTH_12MHZ_SYSCLK;
+		break;
+	case 13000000:
+		sr->clk_length = SRCLKLENGTH_13MHZ_SYSCLK;
+		break;
+	case 19200000:
+		sr->clk_length = SRCLKLENGTH_19MHZ_SYSCLK;
+		break;
+	case 26000000:
+		sr->clk_length = SRCLKLENGTH_26MHZ_SYSCLK;
+		break;
+	case 38400000:
+		sr->clk_length = SRCLKLENGTH_38MHZ_SYSCLK;
+		break;
+	default:
+		dev_err(&sr->pdev->dev, "%s: Invalid sysclk value: %d\n",
+			__func__, sys_clk_speed);
+		break;
+	}
+}
+
+static void sr_set_regfields(struct omap_sr *sr)
+{
+	/*
+	 * For time being these values are defined in smartreflex.h
+	 * and populated during init. May be they can be moved to board
+	 * file or pmic specific data structure. In that case these structure
+	 * fields will have to be populated using the pdata or pmic structure.
+	 */
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		sr->err_weight = OMAP3430_SR_ERRWEIGHT;
+		sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
+		sr->accum_data = OMAP3430_SR_ACCUMDATA;
+		if (!(strcmp(sr->voltdm->name, "mpu"))) {
+			sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
+			sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
+		} else {
+			sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
+			sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
+		}
+	}
+}
+
+static void sr_start_vddautocomp(struct omap_sr *sr)
+{
+	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
+		dev_warn(&sr->pdev->dev,
+			"%s: smartreflex class driver not registered\n",
+			__func__);
+		return;
+	}
+
+	if (!sr_class->enable(sr->voltdm))
+		sr->autocomp_active = true;
+}
+
+static void sr_stop_vddautocomp(struct omap_sr *sr)
+{
+	if (!sr_class || !(sr_class->disable)) {
+		dev_warn(&sr->pdev->dev,
+			"%s: smartreflex class driver not registered\n",
+			__func__);
+		return;
+	}
+
+	if (sr->autocomp_active) {
+		sr_class->disable(sr->voltdm, 1);
+		sr->autocomp_active = false;
+	}
+}
+
+/*
+ * This function handles the intializations which have to be done
+ * only when both sr device and class driver regiter has
+ * completed. This will be attempted to be called from both sr class
+ * driver register and sr device intializtion API's. Only one call
+ * will ultimately succeed.
+ *
+ * Currenly this function registers interrrupt handler for a particular SR
+ * if smartreflex class driver is already registered and has
+ * requested for interrupts and the SR interrupt line in present.
+ */
+static int sr_late_init(struct omap_sr *sr_info)
+{
+	char *name;
+	struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
+	struct resource *mem;
+	int ret = 0;
+
+	if (sr_class->class_type == SR_CLASS2 &&
+		sr_class->notify_flags && sr_info->irq) {
+
+		name = kzalloc(SMARTREFLEX_NAME_LEN + 1, GFP_KERNEL);
+		strcpy(name, "sr_");
+		strcat(name, sr_info->voltdm->name);
+		ret = request_irq(sr_info->irq, sr_interrupt,
+				0, name, (void *)sr_info);
+		if (ret)
+			goto error;
+	}
+
+	if (pdata && pdata->enable_on_init)
+		sr_start_vddautocomp(sr_info);
+
+	return ret;
+
+error:
+		iounmap(sr_info->base);
+		mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0);
+		release_mem_region(mem->start, resource_size(mem));
+		list_del(&sr_info->node);
+		dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
+			"interrupt handler. Smartreflex will"
+			"not function as desired\n", __func__);
+		kfree(sr_info);
+		return ret;
+}
+
+static void sr_v1_disable(struct omap_sr *sr)
+{
+	int timeout = 0;
+
+	/* Enable MCUDisableAcknowledge interrupt */
+	sr_modify_reg(sr, ERRCONFIG_V1,
+			ERRCONFIG_MCUDISACKINTEN, ERRCONFIG_MCUDISACKINTEN);
+
+	/* SRCONFIG - disable SR */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
+
+	/* Disable all other SR interrupts and clear the status */
+	sr_modify_reg(sr, ERRCONFIG_V1,
+			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
+			ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_VPBOUNDINTEN_V1),
+			(ERRCONFIG_MCUACCUMINTST | ERRCONFIG_MCUVALIDINTST |
+			ERRCONFIG_MCUBOUNDINTST |
+			ERRCONFIG_VPBOUNDINTST_V1));
+
+	/*
+	 * Wait for SR to be disabled.
+	 * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
+	 */
+	omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
+			ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
+			timeout);
+
+	if (timeout >= SR_DISABLE_TIMEOUT)
+		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
+			__func__);
+
+	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
+	sr_modify_reg(sr, ERRCONFIG_V1, ERRCONFIG_MCUDISACKINTEN,
+			ERRCONFIG_MCUDISACKINTST);
+}
+
+static void sr_v2_disable(struct omap_sr *sr)
+{
+	int timeout = 0;
+
+	/* Enable MCUDisableAcknowledge interrupt */
+	sr_write_reg(sr, IRQENABLE_SET, IRQENABLE_MCUDISABLEACKINT);
+
+	/* SRCONFIG - disable SR */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, 0x0);
+
+	/* Disable all other SR interrupts and clear the status */
+	sr_modify_reg(sr, ERRCONFIG_V2, ERRCONFIG_VPBOUNDINTEN_V2,
+			ERRCONFIG_VPBOUNDINTST_V2);
+	sr_write_reg(sr, IRQENABLE_CLR, (IRQENABLE_MCUACCUMINT |
+			IRQENABLE_MCUVALIDINT |
+			IRQENABLE_MCUBOUNDSINT));
+	sr_write_reg(sr, IRQSTATUS, (IRQSTATUS_MCUACCUMINT |
+			IRQSTATUS_MCVALIDINT |
+			IRQSTATUS_MCBOUNDSINT));
+
+	/*
+	 * Wait for SR to be disabled.
+	 * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
+	 */
+	omap_test_timeout((sr_read_reg(sr, IRQSTATUS) &
+			IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
+			timeout);
+
+	if (timeout >= SR_DISABLE_TIMEOUT)
+		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
+			__func__);
+
+	/* Disable MCUDisableAcknowledge interrupt & clear pending interrupt */
+	sr_write_reg(sr, IRQENABLE_CLR, IRQENABLE_MCUDISABLEACKINT);
+	sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
+}
+
+static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
+{
+	int i;
+
+	if (!sr->nvalue_table) {
+		dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
+			__func__);
+		return 0;
+	}
+
+	for (i = 0; i < sr->nvalue_count; i++) {
+		if (sr->nvalue_table[i].efuse_offs == efuse_offs)
+			return sr->nvalue_table[i].nvalue;
+	}
+
+	return 0;
+}
+
+/* Public Functions */
+
+/**
+ * sr_configure_errgen() - Configures the smrtreflex to perform AVS using the
+ *			 error generator module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * configure the error generator module inside the smartreflex module.
+ * SR settings if using the ERROR module inside Smartreflex.
+ * SR CLASS 3 by default uses only the ERROR module where as
+ * SR CLASS 2 can choose between ERROR module and MINMAXAVG
+ * module. Returns 0 on success and error value in case of failure.
+ */
+int sr_configure_errgen(struct voltagedomain *voltdm)
+{
+	u32 sr_config, sr_errconfig, errconfig_offs, vpboundint_en;
+	u32 vpboundint_st, senp_en = 0, senn_en = 0;
+	u8 senp_shift, senn_shift;
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return -EINVAL;
+	}
+
+	if (!sr->clk_length)
+		sr_set_clk_length(sr);
+
+	senp_en = sr->senp_mod;
+	senn_en = sr->senn_mod;
+
+	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+		SRCONFIG_SENENABLE | SRCONFIG_ERRGEN_EN;
+
+	if (sr->ip_type == SR_TYPE_V1) {
+		sr_config |= SRCONFIG_DELAYCTRL;
+		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
+		errconfig_offs = ERRCONFIG_V1;
+		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V1;
+		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V1;
+	} else if (sr->ip_type == SR_TYPE_V2) {
+		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
+		errconfig_offs = ERRCONFIG_V2;
+		vpboundint_en = ERRCONFIG_VPBOUNDINTEN_V2;
+		vpboundint_st = ERRCONFIG_VPBOUNDINTST_V2;
+	} else {
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
+	}
+
+	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
+	sr_write_reg(sr, SRCONFIG, sr_config);
+	sr_errconfig = (sr->err_weight << ERRCONFIG_ERRWEIGHT_SHIFT) |
+		(sr->err_maxlimit << ERRCONFIG_ERRMAXLIMIT_SHIFT) |
+		(sr->err_minlimit <<  ERRCONFIG_ERRMINLIMIT_SHIFT);
+	sr_modify_reg(sr, errconfig_offs, (SR_ERRWEIGHT_MASK |
+		SR_ERRMAXLIMIT_MASK | SR_ERRMINLIMIT_MASK),
+		sr_errconfig);
+
+	/* Enabling the interrupts if the ERROR module is used */
+	sr_modify_reg(sr, errconfig_offs,
+		vpboundint_en, (vpboundint_en | vpboundint_st));
+
+	return 0;
+}
+
+/**
+ * sr_configure_minmax() - Configures the smrtreflex to perform AVS using the
+ *			 minmaxavg module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * configure the minmaxavg module inside the smartreflex module.
+ * SR settings if using the ERROR module inside Smartreflex.
+ * SR CLASS 3 by default uses only the ERROR module where as
+ * SR CLASS 2 can choose between ERROR module and MINMAXAVG
+ * module. Returns 0 on success and error value in case of failure.
+ */
+int sr_configure_minmax(struct voltagedomain *voltdm)
+{
+	u32 sr_config, sr_avgwt;
+	u32 senp_en = 0, senn_en = 0;
+	u8 senp_shift, senn_shift;
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return -EINVAL;
+	}
+
+	if (!sr->clk_length)
+		sr_set_clk_length(sr);
+
+	senp_en = sr->senp_mod;
+	senn_en = sr->senn_mod;
+
+	sr_config = (sr->clk_length << SRCONFIG_SRCLKLENGTH_SHIFT) |
+		SRCONFIG_SENENABLE |
+		(sr->accum_data << SRCONFIG_ACCUMDATA_SHIFT);
+
+	if (sr->ip_type == SR_TYPE_V1) {
+		sr_config |= SRCONFIG_DELAYCTRL;
+		senn_shift = SRCONFIG_SENNENABLE_V1_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V1_SHIFT;
+	} else if (sr->ip_type == SR_TYPE_V2) {
+		senn_shift = SRCONFIG_SENNENABLE_V2_SHIFT;
+		senp_shift = SRCONFIG_SENPENABLE_V2_SHIFT;
+	} else {
+		dev_err(&sr->pdev->dev, "%s: Trying to Configure smartreflex"
+			"module without specifying the ip\n", __func__);
+		return -EINVAL;
+	}
+
+	sr_config |= ((senn_en << senn_shift) | (senp_en << senp_shift));
+	sr_write_reg(sr, SRCONFIG, sr_config);
+	sr_avgwt = (sr->senp_avgweight << AVGWEIGHT_SENPAVGWEIGHT_SHIFT) |
+		(sr->senn_avgweight << AVGWEIGHT_SENNAVGWEIGHT_SHIFT);
+	sr_write_reg(sr, AVGWEIGHT, sr_avgwt);
+
+	/*
+	 * Enabling the interrupts if MINMAXAVG module is used.
+	 * TODO: check if all the interrupts are mandatory
+	 */
+	if (sr->ip_type == SR_TYPE_V1) {
+		sr_modify_reg(sr, ERRCONFIG_V1,
+			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUVALIDINTEN |
+			ERRCONFIG_MCUBOUNDINTEN),
+			(ERRCONFIG_MCUACCUMINTEN | ERRCONFIG_MCUACCUMINTST |
+			 ERRCONFIG_MCUVALIDINTEN | ERRCONFIG_MCUVALIDINTST |
+			 ERRCONFIG_MCUBOUNDINTEN | ERRCONFIG_MCUBOUNDINTST));
+	} else if (sr->ip_type == SR_TYPE_V2) {
+		sr_write_reg(sr, IRQSTATUS,
+			IRQSTATUS_MCUACCUMINT | IRQSTATUS_MCVALIDINT |
+			IRQSTATUS_MCBOUNDSINT | IRQSTATUS_MCUDISABLEACKINT);
+		sr_write_reg(sr, IRQENABLE_SET,
+			IRQENABLE_MCUACCUMINT | IRQENABLE_MCUVALIDINT |
+			IRQENABLE_MCUBOUNDSINT | IRQENABLE_MCUDISABLEACKINT);
+	}
+
+	return 0;
+}
+
+/**
+ * sr_enable() - Enables the smartreflex module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ * @volt:	The voltage at which the Voltage domain associated with
+ *		the smartreflex module is operating at.
+ *		This is required only to program the correct Ntarget value.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * enable a smartreflex module. Returns 0 on success. Returns error
+ * value if the voltage passed is wrong or if ntarget value is wrong.
+ */
+int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
+{
+	u32 nvalue_reciprocal;
+	struct omap_volt_data *volt_data;
+	struct omap_sr *sr = _sr_lookup(voltdm);
+	int ret;
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return -EINVAL;
+	}
+
+	volt_data = omap_voltage_get_voltdata(sr->voltdm, volt);
+
+	if (IS_ERR(volt_data)) {
+		dev_warn(&sr->pdev->dev, "%s: Unable to get voltage table"
+			"for nominal voltage %ld\n", __func__, volt);
+		return -ENODATA;
+	}
+
+	nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
+
+	if (!nvalue_reciprocal) {
+		dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
+			__func__, volt);
+		return -ENODATA;
+	}
+
+	/* errminlimit is opp dependent and hence linked to voltage */
+	sr->err_minlimit = volt_data->sr_errminlimit;
+
+	pm_runtime_get_sync(&sr->pdev->dev);
+
+	/* Check if SR is already enabled. If yes do nothing */
+	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE)
+		return 0;
+
+	/* Configure SR */
+	ret = sr_class->configure(voltdm);
+	if (ret)
+		return ret;
+
+	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
+
+	/* SRCONFIG - enable SR */
+	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
+	return 0;
+}
+
+/**
+ * sr_disable() - Disables the smartreflex module.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the smartreflex class driver to
+ * disable a smartreflex module.
+ */
+void sr_disable(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	/* Check if SR clocks are already disabled. If yes do nothing */
+	if (pm_runtime_suspended(&sr->pdev->dev))
+		return;
+
+	/*
+	 * Disable SR if only it is indeed enabled. Else just
+	 * disable the clocks.
+	 */
+	if (sr_read_reg(sr, SRCONFIG) & SRCONFIG_SRENABLE) {
+		if (sr->ip_type == SR_TYPE_V1)
+			sr_v1_disable(sr);
+		else if (sr->ip_type == SR_TYPE_V2)
+			sr_v2_disable(sr);
+	}
+
+	pm_runtime_put_sync(&sr->pdev->dev);
+}
+
+/**
+ * sr_register_class() - API to register a smartreflex class parameters.
+ * @class_data:	The structure containing various sr class specific data.
+ *
+ * This API is to be called by the smartreflex class driver to register itself
+ * with the smartreflex driver during init. Returns 0 on success else the
+ * error value.
+ */
+int sr_register_class(struct omap_sr_class_data *class_data)
+{
+	struct omap_sr *sr_info;
+
+	if (!class_data) {
+		pr_warning("%s:, Smartreflex class data passed is NULL\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (sr_class) {
+		pr_warning("%s: Smartreflex class driver already registered\n",
+			__func__);
+		return -EBUSY;
+	}
+
+	sr_class = class_data;
+
+	/*
+	 * Call into late init to do intializations that require
+	 * both sr driver and sr class driver to be initiallized.
+	 */
+	list_for_each_entry(sr_info, &sr_list, node)
+		sr_late_init(sr_info);
+
+	return 0;
+}
+
+/**
+ * omap_sr_enable() -  API to enable SR clocks and to call into the
+ *			registered smartreflex class enable API.
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to enable
+ * a particular smartreflex module. This API will do the initial
+ * configurations to turn on the smartreflex module and in turn call
+ * into the registered smartreflex class enable API.
+ */
+void omap_sr_enable(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	if (!sr->autocomp_active)
+		return;
+
+	if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) {
+		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
+			"registered\n", __func__);
+		return;
+	}
+
+	sr_class->enable(voltdm);
+}
+
+/**
+ * omap_sr_disable() - API to disable SR without resetting the voltage
+ *			processor voltage
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to disable
+ * a particular smartreflex module. This API will in turn call
+ * into the registered smartreflex class disable API. This API will tell
+ * the smartreflex class disable not to reset the VP voltage after
+ * disabling smartreflex.
+ */
+void omap_sr_disable(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	if (!sr->autocomp_active)
+		return;
+
+	if (!sr_class || !(sr_class->disable)) {
+		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
+			"registered\n", __func__);
+		return;
+	}
+
+	sr_class->disable(voltdm, 0);
+}
+
+/**
+ * omap_sr_disable_reset_volt() - API to disable SR and reset the
+ *				voltage processor voltage
+ * @voltdm:	VDD pointer to which the SR module to be configured belongs to.
+ *
+ * This API is to be called from the kernel in order to disable
+ * a particular smartreflex module. This API will in turn call
+ * into the registered smartreflex class disable API. This API will tell
+ * the smartreflex class disable to reset the VP voltage after
+ * disabling smartreflex.
+ */
+void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
+{
+	struct omap_sr *sr = _sr_lookup(voltdm);
+
+	if (IS_ERR(sr)) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	if (!sr->autocomp_active)
+		return;
+
+	if (!sr_class || !(sr_class->disable)) {
+		dev_warn(&sr->pdev->dev, "%s: smartreflex class driver not"
+			"registered\n", __func__);
+		return;
+	}
+
+	sr_class->disable(voltdm, 1);
+}
+
+/**
+ * omap_sr_register_pmic() - API to register pmic specific info.
+ * @pmic_data:	The structure containing pmic specific data.
+ *
+ * This API is to be called from the PMIC specific code to register with
+ * smartreflex driver pmic specific info. Currently the only info required
+ * is the smartreflex init on the PMIC side.
+ */
+void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data)
+{
+	if (!pmic_data) {
+		pr_warning("%s: Trying to register NULL PMIC data structure"
+			"with smartreflex\n", __func__);
+		return;
+	}
+
+	sr_pmic_data = pmic_data;
+}
+
+/* PM Debug Fs enteries to enable disable smartreflex. */
+static int omap_sr_autocomp_show(void *data, u64 *val)
+{
+	struct omap_sr *sr_info = (struct omap_sr *) data;
+
+	if (!sr_info) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, sr_info->voltdm->name);
+		return -EINVAL;
+	}
+
+	*val = sr_info->autocomp_active;
+
+	return 0;
+}
+
+static int omap_sr_autocomp_store(void *data, u64 val)
+{
+	struct omap_sr *sr_info = (struct omap_sr *) data;
+
+	if (!sr_info) {
+		pr_warning("%s: omap_sr struct for sr_%s not found\n",
+			__func__, sr_info->voltdm->name);
+		return -EINVAL;
+	}
+
+	/* Sanity check */
+	if (val && (val != 1)) {
+		pr_warning("%s: Invalid argument %lld\n", __func__, val);
+		return -EINVAL;
+	}
+
+	if (!val)
+		sr_stop_vddautocomp(sr_info);
+	else
+		sr_start_vddautocomp(sr_info);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
+		omap_sr_autocomp_store, "%llu\n");
+
+static int __init omap_sr_probe(struct platform_device *pdev)
+{
+	struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
+	struct omap_sr_data *pdata = pdev->dev.platform_data;
+	struct resource *mem, *irq;
+	struct dentry *vdd_dbg_dir, *dbg_dir, *nvalue_dir;
+	struct omap_volt_data *volt_data;
+	int i, ret = 0;
+
+	if (!sr_info) {
+		dev_err(&pdev->dev, "%s: unable to allocate sr_info\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+		return -EINVAL;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
+		ret = -ENODEV;
+		goto err_free_devinfo;
+	}
+
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	pm_runtime_enable(&pdev->dev);
+
+	sr_info->pdev = pdev;
+	sr_info->srid = pdev->id;
+	sr_info->voltdm = pdata->voltdm;
+	sr_info->nvalue_table = pdata->nvalue_table;
+	sr_info->nvalue_count = pdata->nvalue_count;
+	sr_info->senn_mod = pdata->senn_mod;
+	sr_info->senp_mod = pdata->senp_mod;
+	sr_info->autocomp_active = false;
+	sr_info->ip_type = pdata->ip_type;
+	sr_info->base = ioremap(mem->start, resource_size(mem));
+	if (!sr_info->base) {
+		dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
+		ret = -ENOMEM;
+		goto err_release_region;
+	}
+
+	if (irq)
+		sr_info->irq = irq->start;
+
+	sr_set_clk_length(sr_info);
+	sr_set_regfields(sr_info);
+
+	list_add(&sr_info->node, &sr_list);
+
+	/*
+	 * Call into late init to do intializations that require
+	 * both sr driver and sr class driver to be initiallized.
+	 */
+	if (sr_class) {
+		ret = sr_late_init(sr_info);
+		if (ret) {
+			pr_warning("%s: Error in SR late init\n", __func__);
+			return ret;
+		}
+	}
+
+	dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
+
+	/*
+	 * If the voltage domain debugfs directory is not created, do
+	 * not try to create rest of the debugfs entries.
+	 */
+	vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm);
+	if (!vdd_dbg_dir)
+		return -EINVAL;
+
+	dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir);
+	if (IS_ERR(dbg_dir)) {
+		dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
+			__func__);
+		return PTR_ERR(dbg_dir);
+	}
+
+	(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUGO, dbg_dir,
+				(void *)sr_info, &pm_sr_fops);
+	(void) debugfs_create_x32("errweight", S_IRUGO, dbg_dir,
+			&sr_info->err_weight);
+	(void) debugfs_create_x32("errmaxlimit", S_IRUGO, dbg_dir,
+			&sr_info->err_maxlimit);
+	(void) debugfs_create_x32("errminlimit", S_IRUGO, dbg_dir,
+			&sr_info->err_minlimit);
+
+	nvalue_dir = debugfs_create_dir("nvalue", dbg_dir);
+	if (IS_ERR(nvalue_dir)) {
+		dev_err(&pdev->dev, "%s: Unable to create debugfs directory"
+			"for n-values\n", __func__);
+		return PTR_ERR(nvalue_dir);
+	}
+
+	omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
+	if (!volt_data) {
+		dev_warn(&pdev->dev, "%s: No Voltage table for the"
+			" corresponding vdd vdd_%s. Cannot create debugfs"
+			"entries for n-values\n",
+			__func__, sr_info->voltdm->name);
+		return -ENODATA;
+	}
+
+	for (i = 0; i < sr_info->nvalue_count; i++) {
+		char *name;
+		char volt_name[32];
+
+		name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
+		if (!name) {
+			dev_err(&pdev->dev, "%s: Unable to allocate memory"
+				" for n-value directory name\n",  __func__);
+			return -ENOMEM;
+		}
+
+		strcpy(name, "volt_");
+		sprintf(volt_name, "%d", volt_data[i].volt_nominal);
+		strcat(name, volt_name);
+		(void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir,
+				&(sr_info->nvalue_table[i].nvalue));
+	}
+
+	return ret;
+
+err_release_region:
+	release_mem_region(mem->start, resource_size(mem));
+err_free_devinfo:
+	kfree(sr_info);
+
+	return ret;
+}
+
+static int __devexit omap_sr_remove(struct platform_device *pdev)
+{
+	struct omap_sr_data *pdata = pdev->dev.platform_data;
+	struct omap_sr *sr_info;
+	struct resource *mem;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
+		return -EINVAL;
+	}
+
+	sr_info = _sr_lookup(pdata->voltdm);
+	if (!sr_info) {
+		dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	if (sr_info->autocomp_active)
+		sr_stop_vddautocomp(sr_info);
+
+	list_del(&sr_info->node);
+	iounmap(sr_info->base);
+	kfree(sr_info);
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(mem->start, resource_size(mem));
+
+	return 0;
+}
+
+static struct platform_driver smartreflex_driver = {
+	.remove         = omap_sr_remove,
+	.driver		= {
+		.name	= "smartreflex",
+	},
+};
+
+static int __init sr_init(void)
+{
+	int ret = 0;
+
+	/*
+	 * sr_init is a late init. If by then a pmic specific API is not
+	 * registered either there is no need for anything to be done on
+	 * the PMIC side or somebody has forgotten to register a PMIC
+	 * handler. Warn for the second condition.
+	 */
+	if (sr_pmic_data && sr_pmic_data->sr_pmic_init)
+		sr_pmic_data->sr_pmic_init();
+	else
+		pr_warning("%s: No PMIC hook to init smartreflex\n", __func__);
+
+	ret = platform_driver_probe(&smartreflex_driver, omap_sr_probe);
+	if (ret) {
+		pr_err("%s: platform driver register failed for SR\n",
+			__func__);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit sr_exit(void)
+{
+	platform_driver_unregister(&smartreflex_driver);
+}
+late_initcall(sr_init);
+module_exit(sr_exit);
+
+MODULE_DESCRIPTION("OMAP Smartreflex Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
new file mode 100644
index 00000000000..786d685c09a
--- /dev/null
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -0,0 +1,146 @@
+/*
+ * OMAP3/OMAP4 smartreflex device file
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Based originally on code from smartreflex.c
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <plat/omap_device.h>
+#include <plat/smartreflex.h>
+#include <plat/voltage.h>
+
+#include "control.h"
+
+static bool sr_enable_on_init;
+
+static struct omap_device_pm_latency omap_sr_latency[] = {
+	{
+		.deactivate_func = omap_device_idle_hwmods,
+		.activate_func	 = omap_device_enable_hwmods,
+		.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST
+	},
+};
+
+/* Read EFUSE values from control registers for OMAP3430 */
+static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
+				struct omap_sr_data *sr_data)
+{
+	struct omap_sr_nvalue_table *nvalue_table;
+	int i, count = 0;
+
+	while (volt_data[count].volt_nominal)
+		count++;
+
+	nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
+			GFP_KERNEL);
+
+	for (i = 0; i < count; i++) {
+		u32 v;
+		/*
+		 * In OMAP4 the efuse registers are 24 bit aligned.
+		 * A __raw_readl will fail for non-32 bit aligned address
+		 * and hence the 8-bit read and shift.
+		 */
+		if (cpu_is_omap44xx()) {
+			u16 offset = volt_data[i].sr_efuse_offs;
+
+			v = omap_ctrl_readb(offset) |
+				omap_ctrl_readb(offset + 1) << 8 |
+				omap_ctrl_readb(offset + 2) << 16;
+		} else {
+			 v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
+		}
+
+		nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
+		nvalue_table[i].nvalue = v;
+	}
+
+	sr_data->nvalue_table = nvalue_table;
+	sr_data->nvalue_count = count;
+}
+
+static int sr_dev_init(struct omap_hwmod *oh, void *user)
+{
+	struct omap_sr_data *sr_data;
+	struct omap_device *od;
+	struct omap_volt_data *volt_data;
+	char *name = "smartreflex";
+	static int i;
+
+	sr_data = kzalloc(sizeof(struct omap_sr_data), GFP_KERNEL);
+	if (!sr_data) {
+		pr_err("%s: Unable to allocate memory for %s sr_data.Error!\n",
+			__func__, oh->name);
+		return -ENOMEM;
+	}
+
+	if (!oh->vdd_name) {
+		pr_err("%s: No voltage domain specified for %s."
+			"Cannot initialize\n", __func__, oh->name);
+		goto exit;
+	}
+
+	sr_data->ip_type = oh->class->rev;
+	sr_data->senn_mod = 0x1;
+	sr_data->senp_mod = 0x1;
+
+	sr_data->voltdm = omap_voltage_domain_lookup(oh->vdd_name);
+	if (IS_ERR(sr_data->voltdm)) {
+		pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
+			__func__, oh->vdd_name);
+		goto exit;
+	}
+
+	omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
+	if (!volt_data) {
+		pr_warning("%s: No Voltage table registerd fo VDD%d."
+			"Something really wrong\n\n", __func__, i + 1);
+		goto exit;
+	}
+
+	sr_set_nvalues(volt_data, sr_data);
+
+	sr_data->enable_on_init = sr_enable_on_init;
+
+	od = omap_device_build(name, i, oh, sr_data, sizeof(*sr_data),
+			       omap_sr_latency,
+			       ARRAY_SIZE(omap_sr_latency), 0);
+	if (IS_ERR(od))
+		pr_warning("%s: Could not build omap_device for %s: %s.\n\n",
+			__func__, name, oh->name);
+exit:
+	i++;
+	kfree(sr_data);
+	return 0;
+}
+
+/*
+ * API to be called from board files to enable smartreflex
+ * autocompensation at init.
+ */
+void __init omap_enable_smartreflex_on_init(void)
+{
+	sr_enable_on_init = true;
+}
+
+int __init omap_devinit_smartreflex(void)
+{
+	return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
+}
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 92e6e1a12af..055310cc77d 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -21,14 +21,20 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
+ *
+ * Richard Woodruff notes that any changes to this code must be carefully
+ * audited and tested to ensure that they don't cause a TLB miss while
+ * the SDRAM is inaccessible.  Such a situation will crash the system
+ * since it will cause the ARM MMU to attempt to walk the page tables.
+ * These crashes may be intermittent.
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
 #include <mach/hardware.h>
 
-#include "prm.h"
-#include "cm.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
 #include "sdrc.h"
 
 	.text
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index ab4973695c7..f9007580aea 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -21,14 +21,20 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
+ *
+ * Richard Woodruff notes that any changes to this code must be carefully
+ * audited and tested to ensure that they don't cause a TLB miss while
+ * the SDRAM is inaccessible.  Such a situation will crash the system
+ * since it will cause the ARM MMU to attempt to walk the page tables.
+ * These crashes may be intermittent.
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
 #include <mach/hardware.h>
 
-#include "prm.h"
-#include "cm.h"
+#include "prm2xxx_3xxx.h"
+#include "cm2xxx_3xxx.h"
 #include "sdrc.h"
 
 	.text
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 3637274af5b..7f893a29d50 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -32,7 +32,7 @@
 #include <mach/io.h>
 
 #include "sdrc.h"
-#include "cm.h"
+#include "cm2xxx_3xxx.h"
 
 	.text
 
@@ -104,6 +104,12 @@
  * touching the SDRAM.  Until that time, users who know that their use case
  * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
  * option.
+ *
+ * Richard Woodruff notes that any changes to this code must be carefully
+ * audited and tested to ensure that they don't cause a TLB miss while
+ * the SDRAM is inaccessible.  Such a situation will crash the system
+ * since it will cause the ARM MMU to attempt to walk the page tables.
+ * These crashes may be intermittent.
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index e13c29eecf2..4e48e786bec 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -195,7 +195,6 @@ static struct clocksource clocksource_gpt = {
 	.rating		= 300,
 	.read		= clocksource_read_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 24,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -203,7 +202,7 @@ static struct clocksource clocksource_gpt = {
 static void __init omap2_gp_clocksource_init(void)
 {
 	static struct omap_dm_timer *gpt;
-	u32 tick_rate, tick_period;
+	u32 tick_rate;
 	static char err1[] __initdata = KERN_ERR
 		"%s: failed to request dm-timer\n";
 	static char err2[] __initdata = KERN_ERR
@@ -216,13 +215,10 @@ static void __init omap2_gp_clocksource_init(void)
 
 	omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK);
 	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
-	tick_period = (tick_rate / HZ) - 1;
 
 	omap_dm_timer_set_load_start(gpt, 1, 0);
 
-	clocksource_gpt.mult =
-		clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);
-	if (clocksource_register(&clocksource_gpt))
+	if (clocksource_register_hz(&clocksource_gpt, tick_rate))
 		printk(err2, clocksource_gpt.name);
 }
 #endif
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
index b11bf385d36..25eeadabc39 100644
--- a/arch/arm/mach-omap2/usb-ehci.c
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -34,22 +34,15 @@
 
 static struct resource ehci_resources[] = {
 	{
-		.start	= OMAP34XX_EHCI_BASE,
-		.end	= OMAP34XX_EHCI_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= OMAP34XX_UHH_CONFIG_BASE,
-		.end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
-		.start	= OMAP34XX_USBTLL_BASE,
-		.end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{         /* general IRQ */
-		.start   = INT_34XX_EHCI_IRQ,
 		.flags   = IORESOURCE_IRQ,
 	}
 };
@@ -214,13 +207,148 @@ static void setup_ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
 	return;
 }
 
+static void setup_4430ehci_io_mux(const enum ehci_hcd_omap_mode *port_mode)
+{
+	switch (port_mode[0]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		omap_mux_init_signal("usbb1_ulpiphy_stp",
+			OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("usbb1_ulpiphy_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpiphy_dat7",
+			OMAP_PIN_INPUT_PULLDOWN);
+			break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_mux_init_signal("usbb1_ulpitll_stp",
+			OMAP_PIN_INPUT_PULLUP);
+		omap_mux_init_signal("usbb1_ulpitll_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb1_ulpitll_dat7",
+			OMAP_PIN_INPUT_PULLDOWN);
+			break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	default:
+			break;
+	}
+	switch (port_mode[1]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		omap_mux_init_signal("usbb2_ulpiphy_stp",
+			OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("usbb2_ulpiphy_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpiphy_dat7",
+			OMAP_PIN_INPUT_PULLDOWN);
+			break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_mux_init_signal("usbb2_ulpitll_stp",
+			OMAP_PIN_INPUT_PULLUP);
+		omap_mux_init_signal("usbb2_ulpitll_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("usbb2_ulpitll_dat7",
+			OMAP_PIN_INPUT_PULLDOWN);
+			break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+	default:
+			break;
+	}
+}
+
 void __init usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata)
 {
 	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
 
 	/* Setup Pin IO MUX for EHCI */
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx()) {
+		ehci_resources[0].start	= OMAP34XX_EHCI_BASE;
+		ehci_resources[0].end	= OMAP34XX_EHCI_BASE + SZ_1K - 1;
+		ehci_resources[1].start	= OMAP34XX_UHH_CONFIG_BASE;
+		ehci_resources[1].end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
+		ehci_resources[2].start	= OMAP34XX_USBTLL_BASE;
+		ehci_resources[2].end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1;
+		ehci_resources[3].start = INT_34XX_EHCI_IRQ;
 		setup_ehci_io_mux(pdata->port_mode);
+	} else if (cpu_is_omap44xx()) {
+		ehci_resources[0].start	= OMAP44XX_HSUSB_EHCI_BASE;
+		ehci_resources[0].end	= OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
+		ehci_resources[1].start	= OMAP44XX_UHH_CONFIG_BASE;
+		ehci_resources[1].end	= OMAP44XX_UHH_CONFIG_BASE + SZ_2K - 1;
+		ehci_resources[2].start	= OMAP44XX_USBTLL_BASE;
+		ehci_resources[2].end	= OMAP44XX_USBTLL_BASE + SZ_4K - 1;
+		ehci_resources[3].start = OMAP44XX_IRQ_EHCI;
+		setup_4430ehci_io_mux(pdata->port_mode);
+	}
 
 	if (platform_device_register(&ehci_device) < 0) {
 		printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 72605584bff..5298949d4b1 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -30,8 +30,101 @@
 #include <mach/irqs.h>
 #include <mach/am35xx.h>
 #include <plat/usb.h>
+#include "control.h"
 
-#ifdef CONFIG_USB_MUSB_SOC
+#if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X)
+
+static void am35x_musb_reset(void)
+{
+	u32	regval;
+
+	/* Reset the musb interface */
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+
+	regval |= AM35XX_USBOTGSS_SW_RST;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+	regval &= ~AM35XX_USBOTGSS_SW_RST;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
+}
+
+static void am35x_musb_phy_power(u8 on)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(100);
+	u32 devconf2;
+
+	if (on) {
+		/*
+		 * Start the on-chip PHY and its PLL.
+		 */
+		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+		devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
+		devconf2 |= CONF2_PHY_PLLON;
+
+		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+
+		pr_info(KERN_INFO "Waiting for PHY clock good...\n");
+		while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
+				& CONF2_PHYCLKGD)) {
+			cpu_relax();
+
+			if (time_after(jiffies, timeout)) {
+				pr_err(KERN_ERR "musb PHY clock good timed out\n");
+				break;
+			}
+		}
+	} else {
+		/*
+		 * Power down the on-chip PHY.
+		 */
+		devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+		devconf2 &= ~CONF2_PHY_PLLON;
+		devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
+		omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+	}
+}
+
+static void am35x_musb_clear_irq(void)
+{
+	u32 regval;
+
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval |= AM35XX_USBOTGSS_INT_CLR;
+	omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
+}
+
+static void am35x_musb_set_mode(u8 musb_mode)
+{
+	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+
+	devconf2 &= ~CONF2_OTGMODE;
+	switch (musb_mode) {
+#ifdef	CONFIG_USB_MUSB_HDRC_HCD
+	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
+		devconf2 |= CONF2_FORCE_HOST;
+		break;
+#endif
+#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
+	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
+		devconf2 |= CONF2_FORCE_DEVICE;
+		break;
+#endif
+#ifdef	CONFIG_USB_MUSB_OTG
+	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
+		devconf2 |= CONF2_NO_OVERRIDE;
+		break;
+#endif
+	default:
+		pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
+	}
+
+	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
+}
 
 static struct resource musb_resources[] = {
 	[0] = { /* start and end set dynamically */
@@ -40,10 +133,12 @@ static struct resource musb_resources[] = {
 	[1] = {	/* general IRQ */
 		.start	= INT_243X_HS_USB_MC,
 		.flags	= IORESOURCE_IRQ,
+		.name	= "mc",
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= INT_243X_HS_USB_DMA,
 		.flags	= IORESOURCE_IRQ,
+		.name	= "dma",
 	},
 };
 
@@ -75,7 +170,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 static u64 musb_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device musb_device = {
-	.name		= "musb_hdrc",
+	.name		= "musb-omap2430",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &musb_dmamask,
@@ -91,8 +186,13 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)
 	if (cpu_is_omap243x()) {
 		musb_resources[0].start = OMAP243X_HS_BASE;
 	} else if (cpu_is_omap3517() || cpu_is_omap3505()) {
+		musb_device.name = "musb-am35x";
 		musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
 		musb_resources[1].start = INT_35XX_USBOTG_IRQ;
+		board_data->set_phy_power = am35x_musb_phy_power;
+		board_data->clear_irq = am35x_musb_clear_irq;
+		board_data->set_mode = am35x_musb_set_mode;
+		board_data->reset = am35x_musb_reset;
 	} else if (cpu_is_omap34xx()) {
 		musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
 	} else if (cpu_is_omap44xx()) {
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 64a0112b70a..8a3c05f3c1d 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -120,8 +120,8 @@ static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps)
 	t.adv_on = next_clk(t.cs_on, t_scsnh_advnh - 7000, fclk_ps);
 
 	/* GPMC_CLK rate = fclk rate / div */
-	t.sync_clk = 12 /* 11.1 nsec */;
-	tmp = (t.sync_clk * 1000 + fclk_ps - 1) / fclk_ps;
+	t.sync_clk = 11100 /* 11.1 nsec */;
+	tmp = (t.sync_clk + fclk_ps - 1) / fclk_ps;
 	if (tmp > 4)
 		return -ERANGE;
 	if (tmp <= 0)
@@ -216,6 +216,7 @@ static struct resource tusb_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	{ /* IRQ */
+		.name	= "mc",
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -223,7 +224,7 @@ static struct resource tusb_resources[] = {
 static u64 tusb_dmamask = ~(u32)0;
 
 static struct platform_device tusb_device = {
-	.name		= "musb_hdrc",
+	.name		= "musb-tusb",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &tusb_dmamask,
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
new file mode 100644
index 00000000000..ed6079c94c5
--- /dev/null
+++ b/arch/arm/mach-omap2/voltage.c
@@ -0,0 +1,1571 @@
+/*
+ * OMAP3/OMAP4 Voltage Management Routines
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ * Lesly A M <x0080970@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+
+#include <plat/common.h>
+#include <plat/voltage.h>
+
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+#include "prcm44xx.h"
+#include "prminst44xx.h"
+#include "control.h"
+
+#define VP_IDLE_TIMEOUT		200
+#define VP_TRANXDONE_TIMEOUT	300
+#define VOLTAGE_DIR_SIZE	16
+
+/* Voltage processor register offsets */
+struct vp_reg_offs {
+	u8 vpconfig;
+	u8 vstepmin;
+	u8 vstepmax;
+	u8 vlimitto;
+	u8 vstatus;
+	u8 voltage;
+};
+
+/* Voltage Processor bit field values, shifts and masks */
+struct vp_reg_val {
+	/* PRM module */
+	u16 prm_mod;
+	/* VPx_VPCONFIG */
+	u32 vpconfig_erroroffset;
+	u16 vpconfig_errorgain;
+	u32 vpconfig_errorgain_mask;
+	u8 vpconfig_errorgain_shift;
+	u32 vpconfig_initvoltage_mask;
+	u8 vpconfig_initvoltage_shift;
+	u32 vpconfig_timeouten;
+	u32 vpconfig_initvdd;
+	u32 vpconfig_forceupdate;
+	u32 vpconfig_vpenable;
+	/* VPx_VSTEPMIN */
+	u8 vstepmin_stepmin;
+	u16 vstepmin_smpswaittimemin;
+	u8 vstepmin_stepmin_shift;
+	u8 vstepmin_smpswaittimemin_shift;
+	/* VPx_VSTEPMAX */
+	u8 vstepmax_stepmax;
+	u16 vstepmax_smpswaittimemax;
+	u8 vstepmax_stepmax_shift;
+	u8 vstepmax_smpswaittimemax_shift;
+	/* VPx_VLIMITTO */
+	u8 vlimitto_vddmin;
+	u8 vlimitto_vddmax;
+	u16 vlimitto_timeout;
+	u8 vlimitto_vddmin_shift;
+	u8 vlimitto_vddmax_shift;
+	u8 vlimitto_timeout_shift;
+	/* PRM_IRQSTATUS*/
+	u32 tranxdone_status;
+};
+
+/* Voltage controller registers and offsets */
+struct vc_reg_info {
+	/* PRM module */
+	u16 prm_mod;
+	/* VC register offsets */
+	u8 smps_sa_reg;
+	u8 smps_volra_reg;
+	u8 bypass_val_reg;
+	u8 cmdval_reg;
+	u8 voltsetup_reg;
+	/*VC_SMPS_SA*/
+	u8 smps_sa_shift;
+	u32 smps_sa_mask;
+	/* VC_SMPS_VOL_RA */
+	u8 smps_volra_shift;
+	u32 smps_volra_mask;
+	/* VC_BYPASS_VAL */
+	u8 data_shift;
+	u8 slaveaddr_shift;
+	u8 regaddr_shift;
+	u32 valid;
+	/* VC_CMD_VAL */
+	u8 cmd_on_shift;
+	u8 cmd_onlp_shift;
+	u8 cmd_ret_shift;
+	u8 cmd_off_shift;
+	u32 cmd_on_mask;
+	/* PRM_VOLTSETUP */
+	u8 voltsetup_shift;
+	u32 voltsetup_mask;
+};
+
+/**
+ * omap_vdd_info - Per Voltage Domain info
+ *
+ * @volt_data		: voltage table having the distinct voltages supported
+ *			  by the domain and other associated per voltage data.
+ * @pmic_info		: pmic specific parameters which should be populted by
+ *			  the pmic drivers.
+ * @vp_offs		: structure containing the offsets for various
+ *			  vp registers
+ * @vp_reg		: the register values, shifts, masks for various
+ *			  vp registers
+ * @vc_reg		: structure containing various various vc registers,
+ *			  shifts, masks etc.
+ * @voltdm		: pointer to the voltage domain structure
+ * @debug_dir		: debug directory for this voltage domain.
+ * @curr_volt		: current voltage for this vdd.
+ * @ocp_mod		: The prm module for accessing the prm irqstatus reg.
+ * @prm_irqst_reg	: prm irqstatus register.
+ * @vp_enabled		: flag to keep track of whether vp is enabled or not
+ * @volt_scale		: API to scale the voltage of the vdd.
+ */
+struct omap_vdd_info {
+	struct omap_volt_data *volt_data;
+	struct omap_volt_pmic_info *pmic_info;
+	struct vp_reg_offs vp_offs;
+	struct vp_reg_val vp_reg;
+	struct vc_reg_info vc_reg;
+	struct voltagedomain voltdm;
+	struct dentry *debug_dir;
+	u32 curr_volt;
+	u16 ocp_mod;
+	u8 prm_irqst_reg;
+	bool vp_enabled;
+	u32 (*read_reg) (u16 mod, u8 offset);
+	void (*write_reg) (u32 val, u16 mod, u8 offset);
+	int (*volt_scale) (struct omap_vdd_info *vdd,
+		unsigned long target_volt);
+};
+
+static struct omap_vdd_info *vdd_info;
+/*
+ * Number of scalable voltage domains.
+ */
+static int nr_scalable_vdd;
+
+/* OMAP3 VDD sturctures */
+static struct omap_vdd_info omap3_vdd_info[] = {
+	{
+		.vp_offs = {
+			.vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET,
+			.vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET,
+			.vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET,
+			.vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET,
+			.vstatus = OMAP3_PRM_VP1_STATUS_OFFSET,
+			.voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET,
+		},
+		.voltdm = {
+			.name = "mpu",
+		},
+	},
+	{
+		.vp_offs = {
+			.vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET,
+			.vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET,
+			.vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET,
+			.vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET,
+			.vstatus = OMAP3_PRM_VP2_STATUS_OFFSET,
+			.voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET,
+		},
+		.voltdm = {
+			.name = "core",
+		},
+	},
+};
+
+#define OMAP3_NR_SCALABLE_VDD ARRAY_SIZE(omap3_vdd_info)
+
+/* OMAP4 VDD sturctures */
+static struct omap_vdd_info omap4_vdd_info[] = {
+	{
+		.vp_offs = {
+			.vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET,
+			.vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET,
+			.vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET,
+			.vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET,
+			.vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET,
+			.voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET,
+		},
+		.voltdm = {
+			.name = "mpu",
+		},
+	},
+	{
+		.vp_offs = {
+			.vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET,
+			.vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET,
+			.vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET,
+			.vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET,
+			.vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET,
+			.voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET,
+		},
+		.voltdm = {
+			.name = "iva",
+		},
+	},
+	{
+		.vp_offs = {
+			.vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET,
+			.vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET,
+			.vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET,
+			.vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET,
+			.vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET,
+			.voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET,
+		},
+		.voltdm = {
+			.name = "core",
+		},
+	},
+};
+
+#define OMAP4_NR_SCALABLE_VDD ARRAY_SIZE(omap4_vdd_info)
+
+/*
+ * Structures containing OMAP3430/OMAP3630 voltage supported and various
+ * voltage dependent data for each VDD.
+ */
+#define VOLT_DATA_DEFINE(_v_nom, _efuse_offs, _errminlimit, _errgain)	\
+{									\
+	.volt_nominal	= _v_nom,					\
+	.sr_efuse_offs	= _efuse_offs,					\
+	.sr_errminlimit	= _errminlimit,					\
+	.vp_errgain	= _errgain					\
+}
+
+/* VDD1 */
+static struct omap_volt_data omap34xx_vddmpu_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD1, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD1, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD1, 0xf9, 0x18),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP4_UV, OMAP343X_CONTROL_FUSE_OPP4_VDD1, 0xf9, 0x18),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_MPU_OPP5_UV, OMAP343X_CONTROL_FUSE_OPP5_VDD1, 0xf9, 0x18),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct omap_volt_data omap36xx_vddmpu_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD1, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD1, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP120_UV, OMAP3630_CONTROL_FUSE_OPP120_VDD1, 0xfa, 0x23),
+	VOLT_DATA_DEFINE(OMAP3630_VDD_MPU_OPP1G_UV, OMAP3630_CONTROL_FUSE_OPP1G_VDD1, 0xfa, 0x27),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+/* VDD2 */
+static struct omap_volt_data omap34xx_vddcore_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP1_UV, OMAP343X_CONTROL_FUSE_OPP1_VDD2, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP2_UV, OMAP343X_CONTROL_FUSE_OPP2_VDD2, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3430_VDD_CORE_OPP3_UV, OMAP343X_CONTROL_FUSE_OPP3_VDD2, 0xf9, 0x18),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct omap_volt_data omap36xx_vddcore_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP50_UV, OMAP3630_CONTROL_FUSE_OPP50_VDD2, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP3630_VDD_CORE_OPP100_UV, OMAP3630_CONTROL_FUSE_OPP100_VDD2, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+/*
+ * Structures containing OMAP4430 voltage supported and various
+ * voltage dependent data for each VDD.
+ */
+static struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct dentry *voltage_dir;
+
+/* Init function pointers */
+static void (*vc_init) (struct omap_vdd_info *vdd);
+static int (*vdd_data_configure) (struct omap_vdd_info *vdd);
+
+static u32 omap3_voltage_read_reg(u16 mod, u8 offset)
+{
+	return omap2_prm_read_mod_reg(mod, offset);
+}
+
+static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset)
+{
+	omap2_prm_write_mod_reg(val, mod, offset);
+}
+
+static u32 omap4_voltage_read_reg(u16 mod, u8 offset)
+{
+	return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
+					mod, offset);
+}
+
+static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset)
+{
+	omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset);
+}
+
+/* Voltage debugfs support */
+static int vp_volt_debug_get(void *data, u64 *val)
+{
+	struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
+	u8 vsel;
+
+	if (!vdd) {
+		pr_warning("Wrong paramater passed\n");
+		return -EINVAL;
+	}
+
+	vsel = vdd->read_reg(vdd->vp_reg.prm_mod, vdd->vp_offs.voltage);
+	pr_notice("curr_vsel = %x\n", vsel);
+
+	if (!vdd->pmic_info->vsel_to_uv) {
+		pr_warning("PMIC function to convert vsel to voltage"
+			"in uV not registerd\n");
+		return -EINVAL;
+	}
+
+	*val = vdd->pmic_info->vsel_to_uv(vsel);
+	return 0;
+}
+
+static int nom_volt_debug_get(void *data, u64 *val)
+{
+	struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
+
+	if (!vdd) {
+		pr_warning("Wrong paramater passed\n");
+		return -EINVAL;
+	}
+
+	*val = omap_voltage_get_nom_volt(&vdd->voltdm);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n");
+DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL,
+								"%llu\n");
+static void vp_latch_vsel(struct omap_vdd_info *vdd)
+{
+	u32 vpconfig;
+	u16 mod;
+	unsigned long uvdc;
+	char vsel;
+
+	uvdc = omap_voltage_get_nom_volt(&vdd->voltdm);
+	if (!uvdc) {
+		pr_warning("%s: unable to find current voltage for vdd_%s\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
+		pr_warning("%s: PMIC function to convert voltage in uV to"
+			" vsel not registered\n", __func__);
+		return;
+	}
+
+	mod = vdd->vp_reg.prm_mod;
+
+	vsel = vdd->pmic_info->uv_to_vsel(uvdc);
+
+	vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
+	vpconfig &= ~(vdd->vp_reg.vpconfig_initvoltage_mask |
+			vdd->vp_reg.vpconfig_initvdd);
+	vpconfig |= vsel << vdd->vp_reg.vpconfig_initvoltage_shift;
+
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	/* Trigger initVDD value copy to voltage processor */
+	vdd->write_reg((vpconfig | vdd->vp_reg.vpconfig_initvdd), mod,
+			vdd->vp_offs.vpconfig);
+
+	/* Clear initVDD copy trigger bit */
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+}
+
+/* Generic voltage init functions */
+static void __init vp_init(struct omap_vdd_info *vdd)
+{
+	u32 vp_val;
+	u16 mod;
+
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	mod = vdd->vp_reg.prm_mod;
+
+	vp_val = vdd->vp_reg.vpconfig_erroroffset |
+		(vdd->vp_reg.vpconfig_errorgain <<
+		vdd->vp_reg.vpconfig_errorgain_shift) |
+		vdd->vp_reg.vpconfig_timeouten;
+	vdd->write_reg(vp_val, mod, vdd->vp_offs.vpconfig);
+
+	vp_val = ((vdd->vp_reg.vstepmin_smpswaittimemin <<
+		vdd->vp_reg.vstepmin_smpswaittimemin_shift) |
+		(vdd->vp_reg.vstepmin_stepmin <<
+		vdd->vp_reg.vstepmin_stepmin_shift));
+	vdd->write_reg(vp_val, mod, vdd->vp_offs.vstepmin);
+
+	vp_val = ((vdd->vp_reg.vstepmax_smpswaittimemax <<
+		vdd->vp_reg.vstepmax_smpswaittimemax_shift) |
+		(vdd->vp_reg.vstepmax_stepmax <<
+		vdd->vp_reg.vstepmax_stepmax_shift));
+	vdd->write_reg(vp_val, mod, vdd->vp_offs.vstepmax);
+
+	vp_val = ((vdd->vp_reg.vlimitto_vddmax <<
+		vdd->vp_reg.vlimitto_vddmax_shift) |
+		(vdd->vp_reg.vlimitto_vddmin <<
+		vdd->vp_reg.vlimitto_vddmin_shift) |
+		(vdd->vp_reg.vlimitto_timeout <<
+		vdd->vp_reg.vlimitto_timeout_shift));
+	vdd->write_reg(vp_val, mod, vdd->vp_offs.vlimitto);
+}
+
+static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
+{
+	char *name;
+
+	name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL);
+	if (!name) {
+		pr_warning("%s: Unable to allocate memory for debugfs"
+			" directory name for vdd_%s",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+	strcpy(name, "vdd_");
+	strcat(name, vdd->voltdm.name);
+
+	vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
+	if (IS_ERR(vdd->debug_dir)) {
+		pr_warning("%s: Unable to create debugfs directory for"
+			" vdd_%s\n", __func__, vdd->voltdm.name);
+		vdd->debug_dir = NULL;
+		return;
+	}
+
+	(void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vpconfig_errorgain));
+	(void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO,
+				vdd->debug_dir,
+				&(vdd->vp_reg.vstepmin_smpswaittimemin));
+	(void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vstepmin_stepmin));
+	(void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO,
+				vdd->debug_dir,
+				&(vdd->vp_reg.vstepmax_smpswaittimemax));
+	(void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vstepmax_stepmax));
+	(void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vlimitto_vddmax));
+	(void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vlimitto_vddmin));
+	(void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir,
+				&(vdd->vp_reg.vlimitto_timeout));
+	(void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir,
+				(void *) vdd, &vp_volt_debug_fops);
+	(void) debugfs_create_file("curr_nominal_volt", S_IRUGO,
+				vdd->debug_dir, (void *) vdd,
+				&nom_volt_debug_fops);
+}
+
+/* Voltage scale and accessory APIs */
+static int _pre_volt_scale(struct omap_vdd_info *vdd,
+		unsigned long target_volt, u8 *target_vsel, u8 *current_vsel)
+{
+	struct omap_volt_data *volt_data;
+	u32 vc_cmdval, vp_errgain_val;
+	u16 vp_mod, vc_mod;
+
+	/* Check if suffiecient pmic info is available for this vdd */
+	if (!vdd->pmic_info) {
+		pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
+			__func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	if (!vdd->pmic_info->uv_to_vsel) {
+		pr_err("%s: PMIC function to convert voltage in uV to"
+			"vsel not registered. Hence unable to scale voltage"
+			"for vdd_%s\n", __func__, vdd->voltdm.name);
+		return -ENODATA;
+	}
+
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	vp_mod = vdd->vp_reg.prm_mod;
+	vc_mod = vdd->vc_reg.prm_mod;
+
+	/* Get volt_data corresponding to target_volt */
+	volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt);
+	if (IS_ERR(volt_data))
+		volt_data = NULL;
+
+	*target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
+	*current_vsel = vdd->read_reg(vp_mod, vdd->vp_offs.voltage);
+
+	/* Setting the ON voltage to the new target voltage */
+	vc_cmdval = vdd->read_reg(vc_mod, vdd->vc_reg.cmdval_reg);
+	vc_cmdval &= ~vdd->vc_reg.cmd_on_mask;
+	vc_cmdval |= (*target_vsel << vdd->vc_reg.cmd_on_shift);
+	vdd->write_reg(vc_cmdval, vc_mod, vdd->vc_reg.cmdval_reg);
+
+	/* Setting vp errorgain based on the voltage */
+	if (volt_data) {
+		vp_errgain_val = vdd->read_reg(vp_mod,
+				vdd->vp_offs.vpconfig);
+		vdd->vp_reg.vpconfig_errorgain = volt_data->vp_errgain;
+		vp_errgain_val &= ~vdd->vp_reg.vpconfig_errorgain_mask;
+		vp_errgain_val |= vdd->vp_reg.vpconfig_errorgain <<
+				vdd->vp_reg.vpconfig_errorgain_shift;
+		vdd->write_reg(vp_errgain_val, vp_mod,
+				vdd->vp_offs.vpconfig);
+	}
+
+	return 0;
+}
+
+static void _post_volt_scale(struct omap_vdd_info *vdd,
+		unsigned long target_volt, u8 target_vsel, u8 current_vsel)
+{
+	u32 smps_steps = 0, smps_delay = 0;
+
+	smps_steps = abs(target_vsel - current_vsel);
+	/* SMPS slew rate / step size. 2us added as buffer. */
+	smps_delay = ((smps_steps * vdd->pmic_info->step_size) /
+			vdd->pmic_info->slew_rate) + 2;
+	udelay(smps_delay);
+
+	vdd->curr_volt = target_volt;
+}
+
+/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */
+static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
+		unsigned long target_volt)
+{
+	u32 loop_cnt = 0, retries_cnt = 0;
+	u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
+	u16 mod;
+	u8 target_vsel, current_vsel;
+	int ret;
+
+	ret = _pre_volt_scale(vdd, target_volt, &target_vsel, &current_vsel);
+	if (ret)
+		return ret;
+
+	mod = vdd->vc_reg.prm_mod;
+
+	vc_valid = vdd->vc_reg.valid;
+	vc_bypass_val_reg = vdd->vc_reg.bypass_val_reg;
+	vc_bypass_value = (target_vsel << vdd->vc_reg.data_shift) |
+			(vdd->pmic_info->pmic_reg <<
+			vdd->vc_reg.regaddr_shift) |
+			(vdd->pmic_info->i2c_slave_addr <<
+			vdd->vc_reg.slaveaddr_shift);
+
+	vdd->write_reg(vc_bypass_value, mod, vc_bypass_val_reg);
+	vdd->write_reg(vc_bypass_value | vc_valid, mod, vc_bypass_val_reg);
+
+	vc_bypass_value = vdd->read_reg(mod, vc_bypass_val_reg);
+	/*
+	 * Loop till the bypass command is acknowledged from the SMPS.
+	 * NOTE: This is legacy code. The loop count and retry count needs
+	 * to be revisited.
+	 */
+	while (!(vc_bypass_value & vc_valid)) {
+		loop_cnt++;
+
+		if (retries_cnt > 10) {
+			pr_warning("%s: Retry count exceeded\n", __func__);
+			return -ETIMEDOUT;
+		}
+
+		if (loop_cnt > 50) {
+			retries_cnt++;
+			loop_cnt = 0;
+			udelay(10);
+		}
+		vc_bypass_value = vdd->read_reg(mod, vc_bypass_val_reg);
+	}
+
+	_post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
+	return 0;
+}
+
+/* VP force update method of voltage scaling */
+static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
+		unsigned long target_volt)
+{
+	u32 vpconfig;
+	u16 mod, ocp_mod;
+	u8 target_vsel, current_vsel, prm_irqst_reg;
+	int ret, timeout = 0;
+
+	ret = _pre_volt_scale(vdd, target_volt, &target_vsel, &current_vsel);
+	if (ret)
+		return ret;
+
+	mod = vdd->vp_reg.prm_mod;
+	ocp_mod = vdd->ocp_mod;
+	prm_irqst_reg = vdd->prm_irqst_reg;
+
+	/*
+	 * Clear all pending TransactionDone interrupt/status. Typical latency
+	 * is <3us
+	 */
+	while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+		vdd->write_reg(vdd->vp_reg.tranxdone_status,
+				ocp_mod, prm_irqst_reg);
+		if (!(vdd->read_reg(ocp_mod, prm_irqst_reg) &
+				vdd->vp_reg.tranxdone_status))
+				break;
+		udelay(1);
+	}
+	if (timeout >= VP_TRANXDONE_TIMEOUT) {
+		pr_warning("%s: vdd_%s TRANXDONE timeout exceeded."
+			"Voltage change aborted", __func__, vdd->voltdm.name);
+		return -ETIMEDOUT;
+	}
+
+	/* Configure for VP-Force Update */
+	vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
+	vpconfig &= ~(vdd->vp_reg.vpconfig_initvdd |
+			vdd->vp_reg.vpconfig_forceupdate |
+			vdd->vp_reg.vpconfig_initvoltage_mask);
+	vpconfig |= ((target_vsel <<
+			vdd->vp_reg.vpconfig_initvoltage_shift));
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	/* Trigger initVDD value copy to voltage processor */
+	vpconfig |= vdd->vp_reg.vpconfig_initvdd;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	/* Force update of voltage */
+	vpconfig |= vdd->vp_reg.vpconfig_forceupdate;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	/*
+	 * Wait for TransactionDone. Typical latency is <200us.
+	 * Depends on SMPSWAITTIMEMIN/MAX and voltage change
+	 */
+	timeout = 0;
+	omap_test_timeout((vdd->read_reg(ocp_mod, prm_irqst_reg) &
+			vdd->vp_reg.tranxdone_status),
+			VP_TRANXDONE_TIMEOUT, timeout);
+	if (timeout >= VP_TRANXDONE_TIMEOUT)
+		pr_err("%s: vdd_%s TRANXDONE timeout exceeded."
+			"TRANXDONE never got set after the voltage update\n",
+			__func__, vdd->voltdm.name);
+
+	_post_volt_scale(vdd, target_volt, target_vsel, current_vsel);
+
+	/*
+	 * Disable TransactionDone interrupt , clear all status, clear
+	 * control registers
+	 */
+	timeout = 0;
+	while (timeout++ < VP_TRANXDONE_TIMEOUT) {
+		vdd->write_reg(vdd->vp_reg.tranxdone_status,
+				ocp_mod, prm_irqst_reg);
+		if (!(vdd->read_reg(ocp_mod, prm_irqst_reg) &
+				vdd->vp_reg.tranxdone_status))
+				break;
+		udelay(1);
+	}
+
+	if (timeout >= VP_TRANXDONE_TIMEOUT)
+		pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying"
+			"to clear the TRANXDONE status\n",
+			__func__, vdd->voltdm.name);
+
+	vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
+	/* Clear initVDD copy trigger bit */
+	vpconfig &= ~vdd->vp_reg.vpconfig_initvdd;;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+	/* Clear force bit */
+	vpconfig &= ~vdd->vp_reg.vpconfig_forceupdate;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	return 0;
+}
+
+/* OMAP3 specific voltage init functions */
+
+/*
+ * Intializes the voltage controller registers with the PMIC and board
+ * specific parameters and voltage setup times for OMAP3.
+ */
+static void __init omap3_vc_init(struct omap_vdd_info *vdd)
+{
+	u32 vc_val;
+	u16 mod;
+	u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
+	static bool is_initialized;
+
+	if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
+		pr_err("%s: PMIC info requried to configure vc for"
+			"vdd_%s not populated.Hence cannot initialize vc\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	mod = vdd->vc_reg.prm_mod;
+
+	/* Set up the SMPS_SA(i2c slave address in VC */
+	vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_sa_reg);
+	vc_val &= ~vdd->vc_reg.smps_sa_mask;
+	vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_reg.smps_sa_shift;
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_sa_reg);
+
+	/* Setup the VOLRA(pmic reg addr) in VC */
+	vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_volra_reg);
+	vc_val &= ~vdd->vc_reg.smps_volra_mask;
+	vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_reg.smps_volra_shift;
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_volra_reg);
+
+	/*Configure the setup times */
+	vc_val = vdd->read_reg(mod, vdd->vc_reg.voltsetup_reg);
+	vc_val &= ~vdd->vc_reg.voltsetup_mask;
+	vc_val |= vdd->pmic_info->volt_setup_time <<
+			vdd->vc_reg.voltsetup_shift;
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.voltsetup_reg);
+
+	/* Set up the on, inactive, retention and off voltage */
+	on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt);
+	onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
+	ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
+	off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
+	vc_val	= ((on_vsel << vdd->vc_reg.cmd_on_shift) |
+		(onlp_vsel << vdd->vc_reg.cmd_onlp_shift) |
+		(ret_vsel << vdd->vc_reg.cmd_ret_shift) |
+		(off_vsel << vdd->vc_reg.cmd_off_shift));
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.cmdval_reg);
+
+	if (is_initialized)
+		return;
+
+	/* Generic VC parameters init */
+	vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, mod,
+			OMAP3_PRM_VC_CH_CONF_OFFSET);
+	vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, mod,
+			OMAP3_PRM_VC_I2C_CFG_OFFSET);
+	vdd->write_reg(OMAP3_CLKSETUP, mod, OMAP3_PRM_CLKSETUP_OFFSET);
+	vdd->write_reg(OMAP3_VOLTOFFSET, mod, OMAP3_PRM_VOLTOFFSET_OFFSET);
+	vdd->write_reg(OMAP3_VOLTSETUP2, mod, OMAP3_PRM_VOLTSETUP2_OFFSET);
+	is_initialized = true;
+}
+
+/* Sets up all the VDD related info for OMAP3 */
+static int __init omap3_vdd_data_configure(struct omap_vdd_info *vdd)
+{
+	struct clk *sys_ck;
+	u32 sys_clk_speed, timeout_val, waittime;
+
+	if (!vdd->pmic_info) {
+		pr_err("%s: PMIC info requried to configure vdd_%s not"
+			"populated.Hence cannot initialize vdd_%s\n",
+			__func__, vdd->voltdm.name, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	if (!strcmp(vdd->voltdm.name, "mpu")) {
+		if (cpu_is_omap3630())
+			vdd->volt_data = omap36xx_vddmpu_volt_data;
+		else
+			vdd->volt_data = omap34xx_vddmpu_volt_data;
+
+		vdd->vp_reg.tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK;
+		vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET;
+		vdd->vc_reg.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT;
+		vdd->vc_reg.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK;
+		vdd->vc_reg.smps_volra_shift = OMAP3430_VOLRA0_SHIFT;
+		vdd->vc_reg.smps_volra_mask = OMAP3430_VOLRA0_MASK;
+		vdd->vc_reg.voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT;
+		vdd->vc_reg.voltsetup_mask = OMAP3430_SETUP_TIME1_MASK;
+	} else if (!strcmp(vdd->voltdm.name, "core")) {
+		if (cpu_is_omap3630())
+			vdd->volt_data = omap36xx_vddcore_volt_data;
+		else
+			vdd->volt_data = omap34xx_vddcore_volt_data;
+
+		vdd->vp_reg.tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK;
+		vdd->vc_reg.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET;
+		vdd->vc_reg.smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT;
+		vdd->vc_reg.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK;
+		vdd->vc_reg.smps_volra_shift = OMAP3430_VOLRA1_SHIFT;
+		vdd->vc_reg.smps_volra_mask = OMAP3430_VOLRA1_MASK;
+		vdd->vc_reg.voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT;
+		vdd->vc_reg.voltsetup_mask = OMAP3430_SETUP_TIME2_MASK;
+	} else {
+		pr_warning("%s: vdd_%s does not exisit in OMAP3\n",
+			__func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	/*
+	 * Sys clk rate is require to calculate vp timeout value and
+	 * smpswaittimemin and smpswaittimemax.
+	 */
+	sys_ck = clk_get(NULL, "sys_ck");
+	if (IS_ERR(sys_ck)) {
+		pr_warning("%s: Could not get the sys clk to calculate"
+			"various vdd_%s params\n", __func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+	sys_clk_speed = clk_get_rate(sys_ck);
+	clk_put(sys_ck);
+	/* Divide to avoid overflow */
+	sys_clk_speed /= 1000;
+
+	/* Generic voltage parameters */
+	vdd->curr_volt = 1200000;
+	vdd->ocp_mod = OCP_MOD;
+	vdd->prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET;
+	vdd->read_reg = omap3_voltage_read_reg;
+	vdd->write_reg = omap3_voltage_write_reg;
+	vdd->volt_scale = vp_forceupdate_scale_voltage;
+	vdd->vp_enabled = false;
+
+	/* VC parameters */
+	vdd->vc_reg.prm_mod = OMAP3430_GR_MOD;
+	vdd->vc_reg.smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET;
+	vdd->vc_reg.smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET;
+	vdd->vc_reg.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET;
+	vdd->vc_reg.voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET;
+	vdd->vc_reg.data_shift = OMAP3430_DATA_SHIFT;
+	vdd->vc_reg.slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT;
+	vdd->vc_reg.regaddr_shift = OMAP3430_REGADDR_SHIFT;
+	vdd->vc_reg.valid = OMAP3430_VALID_MASK;
+	vdd->vc_reg.cmd_on_shift = OMAP3430_VC_CMD_ON_SHIFT;
+	vdd->vc_reg.cmd_on_mask = OMAP3430_VC_CMD_ON_MASK;
+	vdd->vc_reg.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT;
+	vdd->vc_reg.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT;
+	vdd->vc_reg.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT;
+
+	vdd->vp_reg.prm_mod = OMAP3430_GR_MOD;
+
+	/* VPCONFIG bit fields */
+	vdd->vp_reg.vpconfig_erroroffset = (vdd->pmic_info->vp_erroroffset <<
+				 OMAP3430_ERROROFFSET_SHIFT);
+	vdd->vp_reg.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK;
+	vdd->vp_reg.vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT;
+	vdd->vp_reg.vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT;
+	vdd->vp_reg.vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK;
+	vdd->vp_reg.vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK;
+	vdd->vp_reg.vpconfig_initvdd = OMAP3430_INITVDD_MASK;
+	vdd->vp_reg.vpconfig_forceupdate = OMAP3430_FORCEUPDATE_MASK;
+	vdd->vp_reg.vpconfig_vpenable = OMAP3430_VPENABLE_MASK;
+
+	/* VSTEPMIN VSTEPMAX bit fields */
+	waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
+				sys_clk_speed) / 1000;
+	vdd->vp_reg.vstepmin_smpswaittimemin = waittime;
+	vdd->vp_reg.vstepmax_smpswaittimemax = waittime;
+	vdd->vp_reg.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
+	vdd->vp_reg.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
+	vdd->vp_reg.vstepmin_smpswaittimemin_shift =
+				OMAP3430_SMPSWAITTIMEMIN_SHIFT;
+	vdd->vp_reg.vstepmax_smpswaittimemax_shift =
+				OMAP3430_SMPSWAITTIMEMAX_SHIFT;
+	vdd->vp_reg.vstepmin_stepmin_shift = OMAP3430_VSTEPMIN_SHIFT;
+	vdd->vp_reg.vstepmax_stepmax_shift = OMAP3430_VSTEPMAX_SHIFT;
+
+	/* VLIMITTO bit fields */
+	timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
+	vdd->vp_reg.vlimitto_timeout = timeout_val;
+	vdd->vp_reg.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
+	vdd->vp_reg.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
+	vdd->vp_reg.vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT;
+	vdd->vp_reg.vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT;
+	vdd->vp_reg.vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT;
+
+	return 0;
+}
+
+/* OMAP4 specific voltage init functions */
+static void __init omap4_vc_init(struct omap_vdd_info *vdd)
+{
+	u32 vc_val;
+	u16 mod;
+	static bool is_initialized;
+
+	if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
+		pr_err("%s: PMIC info requried to configure vc for"
+			"vdd_%s not populated.Hence cannot initialize vc\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, vdd->voltdm.name);
+		return;
+	}
+
+	mod = vdd->vc_reg.prm_mod;
+
+	/* Set up the SMPS_SA(i2c slave address in VC */
+	vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_sa_reg);
+	vc_val &= ~vdd->vc_reg.smps_sa_mask;
+	vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_reg.smps_sa_shift;
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_sa_reg);
+
+	/* Setup the VOLRA(pmic reg addr) in VC */
+	vc_val = vdd->read_reg(mod, vdd->vc_reg.smps_volra_reg);
+	vc_val &= ~vdd->vc_reg.smps_volra_mask;
+	vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_reg.smps_volra_shift;
+	vdd->write_reg(vc_val, mod, vdd->vc_reg.smps_volra_reg);
+
+	/* TODO: Configure setup times and CMD_VAL values*/
+
+	if (is_initialized)
+		return;
+
+	/* Generic VC parameters init */
+	vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
+		OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
+		OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
+	vdd->write_reg(vc_val, mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
+
+	vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
+	vdd->write_reg(vc_val, mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+
+	is_initialized = true;
+}
+
+/* Sets up all the VDD related info for OMAP4 */
+static int __init omap4_vdd_data_configure(struct omap_vdd_info *vdd)
+{
+	struct clk *sys_ck;
+	u32 sys_clk_speed, timeout_val, waittime;
+
+	if (!vdd->pmic_info) {
+		pr_err("%s: PMIC info requried to configure vdd_%s not"
+			"populated.Hence cannot initialize vdd_%s\n",
+			__func__, vdd->voltdm.name, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	if (!strcmp(vdd->voltdm.name, "mpu")) {
+		vdd->volt_data = omap44xx_vdd_mpu_volt_data;
+		vdd->vp_reg.tranxdone_status =
+				OMAP4430_VP_MPU_TRANXDONE_ST_MASK;
+		vdd->vc_reg.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET;
+		vdd->vc_reg.smps_sa_shift =
+				OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT;
+		vdd->vc_reg.smps_sa_mask =
+				OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK;
+		vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT;
+		vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK;
+		vdd->vc_reg.voltsetup_reg =
+				OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET;
+		vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET;
+	} else if (!strcmp(vdd->voltdm.name, "core")) {
+		vdd->volt_data = omap44xx_vdd_core_volt_data;
+		vdd->vp_reg.tranxdone_status =
+				OMAP4430_VP_CORE_TRANXDONE_ST_MASK;
+		vdd->vc_reg.cmdval_reg =
+				OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET;
+		vdd->vc_reg.smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT;
+		vdd->vc_reg.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK;
+		vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT;
+		vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK;
+		vdd->vc_reg.voltsetup_reg =
+				OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET;
+		vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET;
+	} else if (!strcmp(vdd->voltdm.name, "iva")) {
+		vdd->volt_data = omap44xx_vdd_iva_volt_data;
+		vdd->vp_reg.tranxdone_status =
+				OMAP4430_VP_IVA_TRANXDONE_ST_MASK;
+		vdd->vc_reg.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET;
+		vdd->vc_reg.smps_sa_shift =
+				OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT;
+		vdd->vc_reg.smps_sa_mask =
+				OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK;
+		vdd->vc_reg.smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT;
+		vdd->vc_reg.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK;
+		vdd->vc_reg.voltsetup_reg =
+				OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET;
+		vdd->prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET;
+	} else {
+		pr_warning("%s: vdd_%s does not exisit in OMAP4\n",
+			__func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+
+	/*
+	 * Sys clk rate is require to calculate vp timeout value and
+	 * smpswaittimemin and smpswaittimemax.
+	 */
+	sys_ck = clk_get(NULL, "sys_clkin_ck");
+	if (IS_ERR(sys_ck)) {
+		pr_warning("%s: Could not get the sys clk to calculate"
+			"various vdd_%s params\n", __func__, vdd->voltdm.name);
+		return -EINVAL;
+	}
+	sys_clk_speed = clk_get_rate(sys_ck);
+	clk_put(sys_ck);
+	/* Divide to avoid overflow */
+	sys_clk_speed /= 1000;
+
+	/* Generic voltage parameters */
+	vdd->curr_volt = 1200000;
+	vdd->ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
+	vdd->read_reg = omap4_voltage_read_reg;
+	vdd->write_reg = omap4_voltage_write_reg;
+	vdd->volt_scale = vp_forceupdate_scale_voltage;
+	vdd->vp_enabled = false;
+
+	/* VC parameters */
+	vdd->vc_reg.prm_mod = OMAP4430_PRM_DEVICE_INST;
+	vdd->vc_reg.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET;
+	vdd->vc_reg.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET;
+	vdd->vc_reg.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET;
+	vdd->vc_reg.data_shift = OMAP4430_DATA_SHIFT;
+	vdd->vc_reg.slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT;
+	vdd->vc_reg.regaddr_shift = OMAP4430_REGADDR_SHIFT;
+	vdd->vc_reg.valid = OMAP4430_VALID_MASK;
+	vdd->vc_reg.cmd_on_shift = OMAP4430_ON_SHIFT;
+	vdd->vc_reg.cmd_on_mask = OMAP4430_ON_MASK;
+	vdd->vc_reg.cmd_onlp_shift = OMAP4430_ONLP_SHIFT;
+	vdd->vc_reg.cmd_ret_shift = OMAP4430_RET_SHIFT;
+	vdd->vc_reg.cmd_off_shift = OMAP4430_OFF_SHIFT;
+
+	vdd->vp_reg.prm_mod = OMAP4430_PRM_DEVICE_INST;
+
+	/* VPCONFIG bit fields */
+	vdd->vp_reg.vpconfig_erroroffset = (vdd->pmic_info->vp_erroroffset <<
+				 OMAP4430_ERROROFFSET_SHIFT);
+	vdd->vp_reg.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK;
+	vdd->vp_reg.vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT;
+	vdd->vp_reg.vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT;
+	vdd->vp_reg.vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK;
+	vdd->vp_reg.vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK;
+	vdd->vp_reg.vpconfig_initvdd = OMAP4430_INITVDD_MASK;
+	vdd->vp_reg.vpconfig_forceupdate = OMAP4430_FORCEUPDATE_MASK;
+	vdd->vp_reg.vpconfig_vpenable = OMAP4430_VPENABLE_MASK;
+
+	/* VSTEPMIN VSTEPMAX bit fields */
+	waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) *
+				sys_clk_speed) / 1000;
+	vdd->vp_reg.vstepmin_smpswaittimemin = waittime;
+	vdd->vp_reg.vstepmax_smpswaittimemax = waittime;
+	vdd->vp_reg.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin;
+	vdd->vp_reg.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax;
+	vdd->vp_reg.vstepmin_smpswaittimemin_shift =
+			OMAP4430_SMPSWAITTIMEMIN_SHIFT;
+	vdd->vp_reg.vstepmax_smpswaittimemax_shift =
+			OMAP4430_SMPSWAITTIMEMAX_SHIFT;
+	vdd->vp_reg.vstepmin_stepmin_shift = OMAP4430_VSTEPMIN_SHIFT;
+	vdd->vp_reg.vstepmax_stepmax_shift = OMAP4430_VSTEPMAX_SHIFT;
+
+	/* VLIMITTO bit fields */
+	timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000;
+	vdd->vp_reg.vlimitto_timeout = timeout_val;
+	vdd->vp_reg.vlimitto_vddmin = vdd->pmic_info->vp_vddmin;
+	vdd->vp_reg.vlimitto_vddmax = vdd->pmic_info->vp_vddmax;
+	vdd->vp_reg.vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT;
+	vdd->vp_reg.vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT;
+	vdd->vp_reg.vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT;
+
+	return 0;
+}
+
+/* Public functions */
+/**
+ * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage
+ * @voltdm:	pointer to the VDD for which current voltage info is needed
+ *
+ * API to get the current non-auto-compensated voltage for a VDD.
+ * Returns 0 in case of error else returns the current voltage for the VDD.
+ */
+unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return 0;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	return vdd->curr_volt;
+}
+
+/**
+ * omap_vp_get_curr_volt() - API to get the current vp voltage.
+ * @voltdm:	pointer to the VDD.
+ *
+ * This API returns the current voltage for the specified voltage processor
+ */
+unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
+{
+	struct omap_vdd_info *vdd;
+	u8 curr_vsel;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return 0;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+	if (!vdd->read_reg) {
+		pr_err("%s: No read API for reading vdd_%s regs\n",
+			__func__, voltdm->name);
+		return 0;
+	}
+
+	curr_vsel = vdd->read_reg(vdd->vp_reg.prm_mod,
+			vdd->vp_offs.voltage);
+
+	if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
+		pr_warning("%s: PMIC function to convert vsel to voltage"
+			"in uV not registerd\n", __func__);
+		return 0;
+	}
+
+	return vdd->pmic_info->vsel_to_uv(curr_vsel);
+}
+
+/**
+ * omap_vp_enable() - API to enable a particular VP
+ * @voltdm:	pointer to the VDD whose VP is to be enabled.
+ *
+ * This API enables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_enable(struct voltagedomain *voltdm)
+{
+	struct omap_vdd_info *vdd;
+	u32 vpconfig;
+	u16 mod;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	mod = vdd->vp_reg.prm_mod;
+
+	/* If VP is already enabled, do nothing. Return */
+	if (vdd->vp_enabled)
+		return;
+
+	vp_latch_vsel(vdd);
+
+	/* Enable VP */
+	vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
+	vpconfig |= vdd->vp_reg.vpconfig_vpenable;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+	vdd->vp_enabled = true;
+}
+
+/**
+ * omap_vp_disable() - API to disable a particular VP
+ * @voltdm:	pointer to the VDD whose VP is to be disabled.
+ *
+ * This API disables a particular voltage processor. Needed by the smartreflex
+ * class drivers.
+ */
+void omap_vp_disable(struct voltagedomain *voltdm)
+{
+	struct omap_vdd_info *vdd;
+	u32 vpconfig;
+	u16 mod;
+	int timeout;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+	if (!vdd->read_reg || !vdd->write_reg) {
+		pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	mod = vdd->vp_reg.prm_mod;
+
+	/* If VP is already disabled, do nothing. Return */
+	if (!vdd->vp_enabled) {
+		pr_warning("%s: Trying to disable VP for vdd_%s when"
+			"it is already disabled\n", __func__, voltdm->name);
+		return;
+	}
+
+	/* Disable VP */
+	vpconfig = vdd->read_reg(mod, vdd->vp_offs.vpconfig);
+	vpconfig &= ~vdd->vp_reg.vpconfig_vpenable;
+	vdd->write_reg(vpconfig, mod, vdd->vp_offs.vpconfig);
+
+	/*
+	 * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
+	 */
+	omap_test_timeout((vdd->read_reg(mod, vdd->vp_offs.vstatus)),
+				VP_IDLE_TIMEOUT, timeout);
+
+	if (timeout >= VP_IDLE_TIMEOUT)
+		pr_warning("%s: vdd_%s idle timedout\n",
+			__func__, voltdm->name);
+
+	vdd->vp_enabled = false;
+
+	return;
+}
+
+/**
+ * omap_voltage_scale_vdd() - API to scale voltage of a particular
+ *				voltage domain.
+ * @voltdm:	pointer to the VDD which is to be scaled.
+ * @target_volt:	The target voltage of the voltage domain
+ *
+ * This API should be called by the kernel to do the voltage scaling
+ * for a particular voltage domain during dvfs or any other situation.
+ */
+int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
+		unsigned long target_volt)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return -EINVAL;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	if (!vdd->volt_scale) {
+		pr_err("%s: No voltage scale API registered for vdd_%s\n",
+			__func__, voltdm->name);
+		return -ENODATA;
+	}
+
+	return vdd->volt_scale(vdd, target_volt);
+}
+
+/**
+ * omap_voltage_reset() - Resets the voltage of a particular voltage domain
+ *			to that of the current OPP.
+ * @voltdm:	pointer to the VDD whose voltage is to be reset.
+ *
+ * This API finds out the correct voltage the voltage domain is supposed
+ * to be at and resets the voltage to that level. Should be used expecially
+ * while disabling any voltage compensation modules.
+ */
+void omap_voltage_reset(struct voltagedomain *voltdm)
+{
+	unsigned long target_uvdc;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return;
+	}
+
+	target_uvdc = omap_voltage_get_nom_volt(voltdm);
+	if (!target_uvdc) {
+		pr_err("%s: unable to find current voltage for vdd_%s\n",
+			__func__, voltdm->name);
+		return;
+	}
+
+	omap_voltage_scale_vdd(voltdm, target_uvdc);
+}
+
+/**
+ * omap_voltage_get_volttable() - API to get the voltage table associated with a
+ *				particular voltage domain.
+ * @voltdm:	pointer to the VDD for which the voltage table is required
+ * @volt_data:	the voltage table for the particular vdd which is to be
+ *		populated by this API
+ *
+ * This API populates the voltage table associated with a VDD into the
+ * passed parameter pointer. Returns the count of distinct voltages
+ * supported by this vdd.
+ *
+ */
+void omap_voltage_get_volttable(struct voltagedomain *voltdm,
+		struct omap_volt_data **volt_data)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	*volt_data = vdd->volt_data;
+}
+
+/**
+ * omap_voltage_get_voltdata() - API to get the voltage table entry for a
+ *				particular voltage
+ * @voltdm:	pointer to the VDD whose voltage table has to be searched
+ * @volt:	the voltage to be searched in the voltage table
+ *
+ * This API searches through the voltage table for the required voltage
+ * domain and tries to find a matching entry for the passed voltage volt.
+ * If a matching entry is found volt_data is populated with that entry.
+ * This API searches only through the non-compensated voltages int the
+ * voltage table.
+ * Returns pointer to the voltage table entry corresponding to volt on
+ * sucess. Returns -ENODATA if no voltage table exisits for the passed voltage
+ * domain or if there is no matching entry.
+ */
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+		unsigned long volt)
+{
+	struct omap_vdd_info *vdd;
+	int i;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	if (!vdd->volt_data) {
+		pr_warning("%s: voltage table does not exist for vdd_%s\n",
+			__func__, voltdm->name);
+		return ERR_PTR(-ENODATA);
+	}
+
+	for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) {
+		if (vdd->volt_data[i].volt_nominal == volt)
+			return &vdd->volt_data[i];
+	}
+
+	pr_notice("%s: Unable to match the current voltage with the voltage"
+		"table for vdd_%s\n", __func__, voltdm->name);
+
+	return ERR_PTR(-ENODATA);
+}
+
+/**
+ * omap_voltage_register_pmic() - API to register PMIC specific data
+ * @voltdm:	pointer to the VDD for which the PMIC specific data is
+ *		to be registered
+ * @pmic_info:	the structure containing pmic info
+ *
+ * This API is to be called by the SOC/PMIC file to specify the
+ * pmic specific info as present in omap_volt_pmic_info structure.
+ */
+int omap_voltage_register_pmic(struct voltagedomain *voltdm,
+		struct omap_volt_pmic_info *pmic_info)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return -EINVAL;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	vdd->pmic_info = pmic_info;
+
+	return 0;
+}
+
+/**
+ * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory
+ *				corresponding to a voltage domain.
+ *
+ * @voltdm:	pointer to the VDD whose debug directory is required.
+ *
+ * This API returns pointer to the debugfs directory corresponding
+ * to the voltage domain. Should be used by drivers requiring to
+ * add any debug entry for a particular voltage domain. Returns NULL
+ * in case of error.
+ */
+struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return NULL;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	return vdd->debug_dir;
+}
+
+/**
+ * omap_change_voltscale_method() - API to change the voltage scaling method.
+ * @voltdm:	pointer to the VDD whose voltage scaling method
+ *		has to be changed.
+ * @voltscale_method:	the method to be used for voltage scaling.
+ *
+ * This API can be used by the board files to change the method of voltage
+ * scaling between vpforceupdate and vcbypass. The parameter values are
+ * defined in voltage.h
+ */
+void omap_change_voltscale_method(struct voltagedomain *voltdm,
+		int voltscale_method)
+{
+	struct omap_vdd_info *vdd;
+
+	if (!voltdm || IS_ERR(voltdm)) {
+		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		return;
+	}
+
+	vdd = container_of(voltdm, struct omap_vdd_info, voltdm);
+
+	switch (voltscale_method) {
+	case VOLTSCALE_VPFORCEUPDATE:
+		vdd->volt_scale = vp_forceupdate_scale_voltage;
+		return;
+	case VOLTSCALE_VCBYPASS:
+		vdd->volt_scale = vc_bypass_scale_voltage;
+		return;
+	default:
+		pr_warning("%s: Trying to change the method of voltage scaling"
+			"to an unsupported one!\n", __func__);
+	}
+}
+
+/**
+ * omap_voltage_domain_lookup() - API to get the voltage domain pointer
+ * @name:	Name of the voltage domain
+ *
+ * This API looks up in the global vdd_info struct for the
+ * existence of voltage domain <name>. If it exists, the API returns
+ * a pointer to the voltage domain structure corresponding to the
+ * VDD<name>. Else retuns error pointer.
+ */
+struct voltagedomain *omap_voltage_domain_lookup(char *name)
+{
+	int i;
+
+	if (!vdd_info) {
+		pr_err("%s: Voltage driver init not yet happened.Faulting!\n",
+			__func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (!name) {
+		pr_err("%s: No name to get the votage domain!\n", __func__);
+		return ERR_PTR(-EINVAL);
+	}
+
+	for (i = 0; i < nr_scalable_vdd; i++) {
+		if (!(strcmp(name, vdd_info[i].voltdm.name)))
+			return &vdd_info[i].voltdm;
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+/**
+ * omap_voltage_late_init() - Init the various voltage parameters
+ *
+ * This API is to be called in the later stages of the
+ * system boot to init the voltage controller and
+ * voltage processors.
+ */
+int __init omap_voltage_late_init(void)
+{
+	int i;
+
+	if (!vdd_info) {
+		pr_err("%s: Voltage driver support not added\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	voltage_dir = debugfs_create_dir("voltage", NULL);
+	if (IS_ERR(voltage_dir))
+		pr_err("%s: Unable to create voltage debugfs main dir\n",
+			__func__);
+	for (i = 0; i < nr_scalable_vdd; i++) {
+		if (vdd_data_configure(&vdd_info[i]))
+			continue;
+		vc_init(&vdd_info[i]);
+		vp_init(&vdd_info[i]);
+		vdd_debugfs_init(&vdd_info[i]);
+	}
+
+	return 0;
+}
+
+/**
+ * omap_voltage_early_init()- Volatage driver early init
+ */
+static int __init omap_voltage_early_init(void)
+{
+	if (cpu_is_omap34xx()) {
+		vdd_info = omap3_vdd_info;
+		nr_scalable_vdd = OMAP3_NR_SCALABLE_VDD;
+		vc_init = omap3_vc_init;
+		vdd_data_configure = omap3_vdd_data_configure;
+	} else if (cpu_is_omap44xx()) {
+		vdd_info = omap4_vdd_info;
+		nr_scalable_vdd = OMAP4_NR_SCALABLE_VDD;
+		vc_init = omap4_vc_init;
+		vdd_data_configure = omap4_vdd_data_configure;
+	} else {
+		pr_warning("%s: voltage driver support not added\n", __func__);
+	}
+
+	return 0;
+}
+core_initcall(omap_voltage_early_init);
diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c
new file mode 100644
index 00000000000..b0c4907ab3c
--- /dev/null
+++ b/arch/arm/mach-omap2/wd_timer.c
@@ -0,0 +1,54 @@
+/*
+ * OMAP2+ MPU WD_TIMER-specific code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include <plat/omap_hwmod.h>
+
+/*
+ * In order to avoid any assumptions from bootloader regarding WDT
+ * settings, WDT module is reset during init. This enables the watchdog
+ * timer. Hence it is required to disable the watchdog after the WDT reset
+ * during init. Otherwise the system would reboot as per the default
+ * watchdog timer registers settings.
+ */
+#define OMAP_WDT_WPS		0x34
+#define OMAP_WDT_SPR		0x48
+
+
+int omap2_wd_timer_disable(struct omap_hwmod *oh)
+{
+	void __iomem *base;
+
+	if (!oh) {
+		pr_err("%s: Could not look up wdtimer_hwmod\n", __func__);
+		return -EINVAL;
+	}
+
+	base = omap_hwmod_get_mpu_rt_va(oh);
+	if (!base) {
+		pr_err("%s: Could not get the base address for %s\n",
+				oh->name, __func__);
+		return -EINVAL;
+	}
+
+	/* sequence required to disable watchdog */
+	__raw_writel(0xAAAA, base + OMAP_WDT_SPR);
+	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
+		cpu_relax();
+
+	__raw_writel(0x5555, base + OMAP_WDT_SPR);
+	while (__raw_readl(base + OMAP_WDT_WPS) & 0x10)
+		cpu_relax();
+
+	return 0;
+}
+
diff --git a/arch/arm/mach-omap2/wd_timer.h b/arch/arm/mach-omap2/wd_timer.h
new file mode 100644
index 00000000000..e0054a2d550
--- /dev/null
+++ b/arch/arm/mach-omap2/wd_timer.h
@@ -0,0 +1,17 @@
+/*
+ * OMAP2+ MPU WD_TIMER-specific function prototypes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
+#define __ARCH_ARM_MACH_OMAP2_WD_TIMER_H
+
+#include <plat/omap_hwmod.h>
+
+extern int omap2_wd_timer_disable(struct omap_hwmod *oh);
+
+#endif
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index c897e03e413..6604fc6ca58 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -51,6 +51,13 @@ config MACH_LINKSTATION_PRO
 	  Buffalo Linkstation Pro/Live platform. Both v1 and
 	  v2 devices are supported.
 
+config MACH_LINKSTATION_LSCHL
+	bool "Buffalo Linkstation Live v3 (LS-CHL)"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Linkstation Live v3 (LS-CHL) platform.
+
 config MACH_LINKSTATION_MINI
 	bool "Buffalo Linkstation Mini"
 	select I2C_BOARDINFO
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index eb6eabcb41e..7f18cdacd48 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
 obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
 obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LSCHL)	+= ls-chl-setup.o
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
index c47b033bd99..c5196101a23 100644
--- a/arch/arm/mach-orion5x/include/mach/io.h
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -38,8 +38,8 @@ __arch_iounmap(void __iomem *addr)
 		__iounmap(addr);
 }
 
-#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
-#define __arch_iounmap(a)	__arch_iounmap(a)
+#define __arch_ioremap		__arch_ioremap
+#define __arch_iounmap		__arch_iounmap
 #define __io(a)			__typesafe_io(a)
 #define __mem_pci(a)		(a)
 
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
new file mode 100644
index 00000000000..20a9b66cbaf
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -0,0 +1,327 @@
+/*
+ * arch/arm/mach-orion5x/ls-chl-setup.c
+ *
+ * Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio-fan.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/system.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * Linkstation LS-CHL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LSCHL_NOR_BOOT_BASE	0xf4000000
+#define LSCHL_NOR_BOOT_SIZE	SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data lschl_nor_flash_data = {
+	.width = 1,
+};
+
+static struct resource lschl_nor_flash_resource = {
+	.flags	= IORESOURCE_MEM,
+	.start	= LSCHL_NOR_BOOT_BASE,
+	.end	= LSCHL_NOR_BOOT_BASE + LSCHL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device lschl_nor_flash = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev = {
+		.platform_data	= &lschl_nor_flash_data,
+	},
+	.num_resources = 1,
+	.resource = &lschl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data lschl_eth_data = {
+	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata lschl_i2c_rtc = {
+	I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LSCHL_GPIO_LED_ALARM	2
+#define LSCHL_GPIO_LED_INFO	3
+#define LSCHL_GPIO_LED_FUNC	17
+#define LSCHL_GPIO_LED_PWR	0
+
+static struct gpio_led lschl_led_pins[] = {
+	{
+		.name = "alarm:red",
+		.gpio = LSCHL_GPIO_LED_ALARM,
+		.active_low = 1,
+	}, {
+		.name = "info:amber",
+		.gpio = LSCHL_GPIO_LED_INFO,
+		.active_low = 1,
+	}, {
+		.name = "func:blue:top",
+		.gpio = LSCHL_GPIO_LED_FUNC,
+		.active_low = 1,
+	}, {
+		.name = "power:blue:bottom",
+		.gpio = LSCHL_GPIO_LED_PWR,
+	},
+};
+
+static struct gpio_led_platform_data lschl_led_data = {
+	.leds = lschl_led_pins,
+	.num_leds = ARRAY_SIZE(lschl_led_pins),
+};
+
+static struct platform_device lschl_leds = {
+	.name = "leds-gpio",
+	.id = -1,
+	.dev = {
+		.platform_data = &lschl_led_data,
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data lschl_sata_data = {
+	.n_ports = 2,
+};
+
+/*****************************************************************************
+ * LS-CHL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the LS-CHL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ *
+ */
+
+static void lschl_power_off(void)
+{
+	arm_machine_restart('h', NULL);
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+#define LSCHL_GPIO_USB_POWER	9
+#define LSCHL_GPIO_AUTO_POWER	17
+#define LSCHL_GPIO_POWER	18
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LSCHL_GPIO_KEY_FUNC		15
+#define LSCHL_GPIO_KEY_POWER		8
+#define LSCHL_GPIO_KEY_AUTOPOWER	10
+#define LSCHL_SW_POWER		0x00
+#define LSCHL_SW_AUTOPOWER	0x01
+#define LSCHL_SW_FUNC		0x02
+
+static struct gpio_keys_button lschl_buttons[] = {
+	{
+		.type = EV_SW,
+		.code = LSCHL_SW_POWER,
+		.gpio = LSCHL_GPIO_KEY_POWER,
+		.desc = "Power-on Switch",
+		.active_low = 1,
+	}, {
+		.type = EV_SW,
+		.code = LSCHL_SW_AUTOPOWER,
+		.gpio = LSCHL_GPIO_KEY_AUTOPOWER,
+		.desc = "Power-auto Switch",
+		.active_low = 1,
+	}, {
+		.type = EV_SW,
+		.code = LSCHL_SW_FUNC,
+		.gpio = LSCHL_GPIO_KEY_FUNC,
+		.desc = "Function Switch",
+		.active_low = 1,
+	},
+};
+
+static struct gpio_keys_platform_data lschl_button_data = {
+	.buttons = lschl_buttons,
+	.nbuttons = ARRAY_SIZE(lschl_buttons),
+};
+
+static struct platform_device lschl_button_device = {
+	.name = "gpio-keys",
+	.id = -1,
+	.num_resources = 0,
+	.dev = {
+		.platform_data = &lschl_button_data,
+	},
+};
+
+#define LSCHL_GPIO_HDD_POWER	1
+
+/****************************************************************************
+ * GPIO Fan
+ ****************************************************************************/
+
+#define LSCHL_GPIO_FAN_LOW	16
+#define LSCHL_GPIO_FAN_HIGH	14
+#define LSCHL_GPIO_FAN_LOCK	6
+
+static struct gpio_fan_alarm lschl_alarm = {
+	.gpio = LSCHL_GPIO_FAN_LOCK,
+};
+
+static struct gpio_fan_speed lschl_speeds[] = {
+	{
+		.rpm = 0,
+		.ctrl_val = 3,
+	}, {
+		.rpm = 1500,
+		.ctrl_val = 2,
+	}, {
+		.rpm = 3250,
+		.ctrl_val = 1,
+	}, {
+		.rpm = 5000,
+		.ctrl_val = 0,
+	},
+};
+
+static int lschl_gpio_list[] = {
+	LSCHL_GPIO_FAN_HIGH, LSCHL_GPIO_FAN_LOW,
+};
+
+static struct gpio_fan_platform_data lschl_fan_data = {
+	.num_ctrl = ARRAY_SIZE(lschl_gpio_list),
+	.ctrl = lschl_gpio_list,
+	.alarm = &lschl_alarm,
+	.num_speed = ARRAY_SIZE(lschl_speeds),
+	.speed = lschl_speeds,
+};
+
+static struct platform_device lschl_fan_device = {
+	.name = "gpio-fan",
+	.id = -1,
+	.num_resources = 0,
+	.dev = {
+		.platform_data = &lschl_fan_data,
+	},
+};
+
+/****************************************************************************
+ * GPIO Data
+ ****************************************************************************/
+
+static struct orion5x_mpp_mode lschl_mpp_modes[] __initdata = {
+	{  0, MPP_GPIO }, /* LED POWER */
+	{  1, MPP_GPIO }, /* HDD POWER */
+	{  2, MPP_GPIO }, /* LED ALARM */
+	{  3, MPP_GPIO }, /* LED INFO */
+	{  4, MPP_UNUSED },
+	{  5, MPP_UNUSED },
+	{  6, MPP_GPIO }, /* FAN LOCK */
+	{  7, MPP_GPIO }, /* SW INIT */
+	{  8, MPP_GPIO }, /* SW POWER */
+	{  9, MPP_GPIO }, /* USB POWER */
+	{ 10, MPP_GPIO }, /* SW AUTO POWER */
+	{ 11, MPP_UNUSED },
+	{ 12, MPP_UNUSED },
+	{ 13, MPP_UNUSED },
+	{ 14, MPP_GPIO }, /* FAN HIGH */
+	{ 15, MPP_GPIO }, /* SW FUNC */
+	{ 16, MPP_GPIO }, /* FAN LOW */
+	{ 17, MPP_GPIO }, /* LED FUNC */
+	{ 18, MPP_UNUSED },
+	{ 19, MPP_UNUSED },
+	{ -1 },
+};
+
+static void __init lschl_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Needs to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(lschl_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&lschl_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&lschl_sata_data);
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	orion5x_setup_dev_boot_win(LSCHL_NOR_BOOT_BASE,
+				   LSCHL_NOR_BOOT_SIZE);
+	platform_device_register(&lschl_nor_flash);
+
+	platform_device_register(&lschl_leds);
+
+	platform_device_register(&lschl_button_device);
+
+	platform_device_register(&lschl_fan_device);
+
+	i2c_register_board_info(0, &lschl_i2c_rtc, 1);
+
+	/* usb power on */
+	gpio_set_value(LSCHL_GPIO_USB_POWER, 1);
+
+	/* register power-off method */
+	pm_power_off = lschl_power_off;
+
+	pr_info("%s: finished\n", __func__);
+}
+
+MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
+	/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
+	.boot_params	= 0x00000100,
+	.init_machine	= lschl_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index bc4c3b9aaf8..db485d3b814 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -127,7 +127,7 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 	/* Initialize gpiolib. */
 	orion_gpio_init();
 
-	while (mode->mpp >= 0) {
+	for ( ; mode->mpp >= 0; mode++) {
 		u32 *reg;
 		int num_type;
 		int shift;
@@ -160,8 +160,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 			orion_gpio_set_unused(mode->mpp);
 
 		orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
-
-		mode++;
 	}
 
 	writel(mpp_0_7_ctrl, MPP_0_7_CTRL);
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 16f1bd5324b..c1c1cd04bdd 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -239,7 +239,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
 static struct resource ts78xx_ts_nand_resources = {
 	.start		= TS_NAND_DATA,
 	.end		= TS_NAND_DATA + 4,
-	.flags		= IORESOURCE_IO,
+	.flags		= IORESOURCE_MEM,
 };
 
 static struct platform_device ts78xx_ts_nand_device = {
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index 9d1975fa4d9..a4a3819c96c 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -21,8 +21,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/io.h>
-
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #include <mach/hardware.h>
 #include <mach/clock.h>
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
index 31b65ee07b0..184913c7114 100644
--- a/arch/arm/mach-pnx4008/include/mach/vmalloc.h
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -17,4 +17,4 @@
  * The vmalloc() routines leaves a hole of 4kB between each vmalloced
  * area for the same reason. ;)
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dd235ecc9d6..2fc9f94cdd2 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -50,6 +50,10 @@ config MACH_SAAR
 	select PXA3xx
 	select CPU_PXA930
 
+config MACH_SAARB
+	bool "PXA955 Handheld Platform (aka SAARB)"
+	select CPU_PXA955
+
 comment "Third Party Dev Platforms (sorted by vendor name)"
 
 config ARCH_PXA_IDP
@@ -94,6 +98,7 @@ config MACH_ARMCORE
 	select PXA27x
 	select IWMMXT
 	select PXA25x
+	select MIGHT_HAVE_PCI
 
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
@@ -232,10 +237,6 @@ config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
 	select PXA27x
 
-config MACH_COLIBRI_PXA270_EVALBOARD
-	bool "Toradex Colibri Evaluation Carrier Board support (PXA270)"
-	depends on MACH_COLIBRI
-
 config MACH_COLIBRI_PXA270_INCOME
 	bool "Income s.r.o. PXA270 SBC"
 	depends on MACH_COLIBRI
@@ -253,6 +254,10 @@ config MACH_COLIBRI320
 	select PXA3xx
 	select CPU_PXA320
 
+config MACH_COLIBRI_EVALBOARD
+	bool "Toradex Colibri Evaluation Carrier Board support"
+	depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320
+
 config MACH_VPAC270
 	bool "Voipac PXA270"
 	select PXA27x
@@ -540,6 +545,7 @@ config MACH_ICONTROL
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
+	select FB_W100
 
 config MACH_E330
 	bool "Toshiba e330"
@@ -651,11 +657,17 @@ config CPU_PXA935
 	help
 	  PXA935 (codename Tavor-P65)
 
-config CPU_PXA950
+config PXA95x
 	bool
-	select CPU_PXA930
+	select CPU_PJ4
+	help
+	  Select code specific to PXA95x variants
+
+config CPU_PXA955
+	bool
+	select PXA95x
 	help
-	  PXA950 (codename Tavor-PV2)
+	  PXA950 (codename MG1)
 
 config PXA_SHARP_C7xx
 	bool
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index e2f89c2c6f4..cc39d17b2e0 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -16,9 +16,10 @@ endif
 # Generic drivers that other drivers may depend upon
 
 # SoC-specific code
-obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA95x)		+= mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
@@ -34,6 +35,7 @@ obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
 obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
 obj-$(CONFIG_MACH_TAVOREVB3)	+= tavorevb3.o
 obj-$(CONFIG_MACH_SAAR)		+= saar.o
+obj-$(CONFIG_MACH_SAARB)	+= saarb.o
 
 # 3rd Party Dev Platforms
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
@@ -60,7 +62,7 @@ obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
 obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)			+= colibri-pxa270.o
-obj-$(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)	+= colibri-pxa270-evalboard.o
+obj-$(CONFIG_MACH_COLIBRI_EVALBOARD)	+= colibri-evalboard.o
 obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME)	+= colibri-pxa270-income.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 21e18890193..ccb2d0cebcc 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -567,27 +567,29 @@ static inline void balloon3_i2c_init(void) {}
  * NAND
  ******************************************************************************/
 #if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
-static uint16_t balloon3_ctl =
-	BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
-	BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
-	BALLOON3_NAND_CONTROL_FLWP;
-
 static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *this = mtd->priv;
+	uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		if (ctrl & NAND_CLE)
-			balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCLE;
+			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE;
 		else
-			balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLCLE;
+			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE;
 
 		if (ctrl & NAND_ALE)
-			balloon3_ctl |= BALLOON3_NAND_CONTROL_FLALE;
+			balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE;
 		else
-			balloon3_ctl &= ~BALLOON3_NAND_CONTROL_FLALE;
-
-		__raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+			balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE;
+
+		if (balloon3_ctl_clr)
+			__raw_writel(balloon3_ctl_clr,
+				BALLOON3_NAND_CONTROL_REG);
+		if (balloon3_ctl_set)
+			__raw_writel(balloon3_ctl_set,
+				BALLOON3_NAND_CONTROL_REG |
+				BALLOON3_FPGA_SETnCLR);
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -599,28 +601,33 @@ static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip)
 	if (chip < 0 || chip > 3)
 		return;
 
-	balloon3_ctl |= BALLOON3_NAND_CONTROL_FLCE0 |
-			BALLOON3_NAND_CONTROL_FLCE1 |
-			BALLOON3_NAND_CONTROL_FLCE2 |
-			BALLOON3_NAND_CONTROL_FLCE3;
+	/* Assert all nCE lines */
+	__raw_writew(
+		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3,
+		BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
 
 	/* Deassert correct nCE line */
-	balloon3_ctl &= ~(BALLOON3_NAND_CONTROL_FLCE0 << chip);
+	__raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip,
+		BALLOON3_NAND_CONTROL_REG);
+}
 
-	__raw_writew(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+static int balloon3_nand_dev_ready(struct mtd_info *mtd)
+{
+	return __raw_readl(BALLOON3_NAND_STAT_REG) & BALLOON3_NAND_STAT_RNB;
 }
 
 static int balloon3_nand_probe(struct platform_device *pdev)
 {
-	void __iomem *temp_map;
 	uint16_t ver;
 	int ret;
 
-	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG);
+	__raw_writew(BALLOON3_NAND_CONTROL2_16BIT,
+		BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR);
 
 	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver > 0x0201)
-		pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+	if (ver < 0x4f08)
+		pr_warn("The FPGA code, version 0x%04x, is too old. "
 			"NAND support might be broken in this version!", ver);
 
 	/* Power up the NAND chips */
@@ -635,7 +642,11 @@ static int balloon3_nand_probe(struct platform_device *pdev)
 	gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1);
 
 	/* Deassert all nCE lines and write protect line */
-	__raw_writel(balloon3_ctl, BALLOON3_NAND_CONTROL_REG);
+	__raw_writel(
+		BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 |
+		BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 |
+		BALLOON3_NAND_CONTROL_FLWP,
+		BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR);
 	return 0;
 
 err2:
@@ -677,7 +688,7 @@ struct platform_nand_data balloon3_nand_pdata = {
 	},
 	.ctrl = {
 		.hwcontrol	= 0,
-		.dev_ready	= 0,
+		.dev_ready	= balloon3_nand_dev_ready,
 		.select_chip	= balloon3_nand_select_chip,
 		.cmd_ctrl	= balloon3_nand_cmd_ctl,
 		.probe		= balloon3_nand_probe,
@@ -802,7 +813,7 @@ static struct map_desc balloon3_io_desc[] __initdata = {
 
 static void __init balloon3_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
 }
 
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4bd7a3cda48..4284513f396 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -149,7 +149,7 @@ static void __init capc7117_init(void)
 MACHINE_START(CAPC7117,
 	      "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa3xx_map_io,
 	.init_irq = pxa3xx_init_irq,
 	.timer = &pxa_timer,
 	.init_machine = capc7117_init
diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c
new file mode 100644
index 00000000000..1ce09044849
--- /dev/null
+++ b/arch/arm/mach-pxa/clock-pxa2xx.c
@@ -0,0 +1,64 @@
+/*
+ * linux/arch/arm/mach-pxa/clock-pxa2xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <mach/pxa2xx-regs.h>
+
+#include "clock.h"
+
+void clk_pxa2xx_cken_enable(struct clk *clk)
+{
+	CKEN |= 1 << clk->cken;
+}
+
+void clk_pxa2xx_cken_disable(struct clk *clk)
+{
+	CKEN &= ~(1 << clk->cken);
+}
+
+const struct clkops clk_pxa2xx_cken_ops = {
+	.enable		= clk_pxa2xx_cken_enable,
+	.disable	= clk_pxa2xx_cken_disable,
+};
+
+#ifdef CONFIG_PM
+static uint32_t saved_cken;
+
+static int pxa2xx_clock_suspend(struct sys_device *d, pm_message_t state)
+{
+	saved_cken = CKEN;
+	return 0;
+}
+
+static int pxa2xx_clock_resume(struct sys_device *d)
+{
+	CKEN = saved_cken;
+	return 0;
+}
+#else
+#define pxa2xx_clock_suspend	NULL
+#define pxa2xx_clock_resume	NULL
+#endif
+
+struct sysdev_class pxa2xx_clock_sysclass = {
+	.name		= "pxa2xx-clock",
+	.suspend	= pxa2xx_clock_suspend,
+	.resume		= pxa2xx_clock_resume,
+};
+
+static int __init pxa2xx_clock_init(void)
+{
+	if (cpu_is_pxa2xx())
+		return sysdev_class_register(&pxa2xx_clock_sysclass);
+	return 0;
+}
+postcore_initcall(pxa2xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
new file mode 100644
index 00000000000..1b08a34ab23
--- /dev/null
+++ b/arch/arm/mach-pxa/clock-pxa3xx.c
@@ -0,0 +1,218 @@
+/*
+ * linux/arch/arm/mach-pxa/clock-pxa3xx.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "clock.h"
+
+/* Crystal clock: 13MHz */
+#define BASE_CLK	13000000
+
+/* Ring Oscillator Clock: 60MHz */
+#define RO_CLK		60000000
+
+#define ACCR_D0CS	(1 << 26)
+#define ACCR_PCCE	(1 << 11)
+
+/* crystal frequency to HSIO bus frequency multiplier (HSS) */
+static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
+
+/*
+ * Get the clock frequency as reflected by CCSR and the turbo flag.
+ * We assume these values have been applied via a fcs.
+ * If info is not 0 we also display the current settings.
+ */
+unsigned int pxa3xx_get_clk_frequency_khz(int info)
+{
+	unsigned long acsr, xclkcfg;
+	unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
+
+	/* Read XCLKCFG register turbo bit */
+	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
+	t = xclkcfg & 0x1;
+
+	acsr = ACSR;
+
+	xl  = acsr & 0x1f;
+	xn  = (acsr >> 8) & 0x7;
+	hss = (acsr >> 14) & 0x3;
+
+	XL = xl * BASE_CLK;
+	XN = xn * XL;
+
+	ro = acsr & ACCR_D0CS;
+
+	CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
+	HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+	if (info) {
+		pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
+			RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
+			(ro) ? "" : "in");
+		pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
+			XL / 1000000, (XL % 1000000) / 10000, xl);
+		pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
+			XN / 1000000, (XN % 1000000) / 10000, xn,
+			(t) ? "" : "in");
+		pr_info("HSIO bus clock: %d.%02dMHz\n",
+			HSS / 1000000, (HSS % 1000000) / 10000);
+	}
+
+	return CLK / 1000;
+}
+
+/*
+ * Return the current AC97 clock frequency.
+ */
+static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
+{
+	unsigned long rate = 312000000;
+	unsigned long ac97_div;
+
+	ac97_div = AC97_DIV;
+
+	/* This may loose precision for some rates but won't for the
+	 * standard 24.576MHz.
+	 */
+	rate /= (ac97_div >> 12) & 0x7fff;
+	rate *= (ac97_div & 0xfff);
+
+	return rate;
+}
+
+/*
+ * Return the current HSIO bus clock frequency
+ */
+static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
+{
+	unsigned long acsr;
+	unsigned int hss, hsio_clk;
+
+	acsr = ACSR;
+
+	hss = (acsr >> 14) & 0x3;
+	hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
+
+	return hsio_clk;
+}
+
+/* crystal frequency to static memory controller multiplier (SMCFS) */
+static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
+static unsigned int df_clkdiv[4] = { 1, 2, 4, 1 };
+
+static unsigned long clk_pxa3xx_smemc_getrate(struct clk *clk)
+{
+	unsigned long acsr = ACSR;
+	unsigned long memclkcfg = __raw_readl(MEMCLKCFG);
+	unsigned int smcfs = (acsr >> 23) & 0x7;
+
+	return BASE_CLK * smcfs_mult[(acsr >> 23) & 0x7] /
+			df_clkdiv[(memclkcfg >> 16) & 0x3];
+}
+
+void clk_pxa3xx_cken_enable(struct clk *clk)
+{
+	unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+	if (clk->cken < 32)
+		CKENA |= mask;
+	else
+		CKENB |= mask;
+}
+
+void clk_pxa3xx_cken_disable(struct clk *clk)
+{
+	unsigned long mask = 1ul << (clk->cken & 0x1f);
+
+	if (clk->cken < 32)
+		CKENA &= ~mask;
+	else
+		CKENB &= ~mask;
+}
+
+const struct clkops clk_pxa3xx_cken_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+};
+
+const struct clkops clk_pxa3xx_hsio_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+	.getrate	= clk_pxa3xx_hsio_getrate,
+};
+
+const struct clkops clk_pxa3xx_ac97_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+	.getrate	= clk_pxa3xx_ac97_getrate,
+};
+
+const struct clkops clk_pxa3xx_smemc_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+	.getrate	= clk_pxa3xx_smemc_getrate,
+};
+
+static void clk_pout_enable(struct clk *clk)
+{
+	OSCC |= OSCC_PEN;
+}
+
+static void clk_pout_disable(struct clk *clk)
+{
+	OSCC &= ~OSCC_PEN;
+}
+
+const struct clkops clk_pxa3xx_pout_ops = {
+	.enable		= clk_pout_enable,
+	.disable	= clk_pout_disable,
+};
+
+#ifdef CONFIG_PM
+static uint32_t cken[2];
+static uint32_t accr;
+
+static int pxa3xx_clock_suspend(struct sys_device *d, pm_message_t state)
+{
+	cken[0] = CKENA;
+	cken[1] = CKENB;
+	accr = ACCR;
+	return 0;
+}
+
+static int pxa3xx_clock_resume(struct sys_device *d)
+{
+	ACCR = accr;
+	CKENA = cken[0];
+	CKENB = cken[1];
+	return 0;
+}
+#else
+#define pxa3xx_clock_suspend	NULL
+#define pxa3xx_clock_resume	NULL
+#endif
+
+struct sysdev_class pxa3xx_clock_sysclass = {
+	.name		= "pxa3xx-clock",
+	.suspend	= pxa3xx_clock_suspend,
+	.resume		= pxa3xx_clock_resume,
+};
+
+static int __init pxa3xx_clock_init(void)
+{
+	if (cpu_is_pxa3xx() || cpu_is_pxa95x())
+		return sysdev_class_register(&pxa3xx_clock_sysclass);
+	return 0;
+}
+postcore_initcall(pxa3xx_clock_init);
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index abba0089a2a..d5152220ce9 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -3,21 +3,11 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/spinlock.h>
-#include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
-#include <mach/pxa2xx-regs.h>
-#include <mach/hardware.h>
-
-#include "devices.h"
-#include "generic.h"
 #include "clock.h"
 
 static DEFINE_SPINLOCK(clocks_lock);
@@ -63,18 +53,19 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-
-void clk_cken_enable(struct clk *clk)
+void clk_dummy_enable(struct clk *clk)
 {
-	CKEN |= 1 << clk->cken;
 }
 
-void clk_cken_disable(struct clk *clk)
+void clk_dummy_disable(struct clk *clk)
 {
-	CKEN &= ~(1 << clk->cken);
 }
 
-const struct clkops clk_cken_ops = {
-	.enable		= clk_cken_enable,
-	.disable	= clk_cken_disable,
+const struct clkops clk_dummy_ops = {
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable,
+};
+
+struct clk clk_dummy = {
+	.ops		= &clk_dummy_ops,
 };
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index d8488742b80..f9f349a21b5 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,4 +1,5 @@
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
+#include <linux/sysdev.h>
 
 struct clkops {
 	void			(*enable)(struct clk *);
@@ -14,6 +15,12 @@ struct clk {
 	unsigned int		enabled;
 };
 
+void clk_dummy_enable(struct clk *);
+void clk_dummy_disable(struct clk *);
+
+extern const struct clkops clk_dummy_ops;
+extern struct clk clk_dummy;
+
 #define INIT_CLKREG(_clk,_devname,_conname)		\
 	{						\
 		.clk		= _clk,			\
@@ -21,14 +28,6 @@ struct clk {
 		.con_id		= _conname,		\
 	}
 
-#define DEFINE_CKEN(_name, _cken, _rate, _delay)	\
-struct clk clk_##_name = {				\
-		.ops	= &clk_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
 #define DEFINE_CK(_name, _cken, _ops)			\
 struct clk clk_##_name = {				\
 		.ops	= _ops,				\
@@ -42,28 +41,38 @@ struct clk clk_##_name = {				\
 		.delay	= _delay,			\
 	}
 
-extern const struct clkops clk_cken_ops;
-
-void clk_cken_enable(struct clk *clk);
-void clk_cken_disable(struct clk *clk);
-
-#ifdef CONFIG_PXA3xx
-#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
+#define DEFINE_PXA2_CKEN(_name, _cken, _rate, _delay)	\
 struct clk clk_##_name = {				\
-		.ops	= &clk_pxa3xx_cken_ops,		\
+		.ops	= &clk_pxa2xx_cken_ops,		\
 		.rate	= _rate,			\
 		.cken	= CKEN_##_cken,			\
 		.delay	= _delay,			\
 	}
 
-#define DEFINE_PXA3_CK(_name, _cken, _ops)		\
+extern const struct clkops clk_pxa2xx_cken_ops;
+
+void clk_pxa2xx_cken_enable(struct clk *clk);
+void clk_pxa2xx_cken_disable(struct clk *clk);
+
+extern struct sysdev_class pxa2xx_clock_sysclass;
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay)	\
 struct clk clk_##_name = {				\
-		.ops	= _ops,				\
+		.ops	= &clk_pxa3xx_cken_ops,		\
+		.rate	= _rate,			\
 		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
 	}
 
 extern const struct clkops clk_pxa3xx_cken_ops;
+extern const struct clkops clk_pxa3xx_hsio_ops;
+extern const struct clkops clk_pxa3xx_ac97_ops;
+extern const struct clkops clk_pxa3xx_pout_ops;
+extern const struct clkops clk_pxa3xx_smemc_ops;
+
 extern void clk_pxa3xx_cken_enable(struct clk *);
 extern void clk_pxa3xx_cken_disable(struct clk *);
-#endif
 
+extern struct sysdev_class pxa3xx_clock_sysclass;
+#endif
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index f1a7703d771..93f59f877fc 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -17,13 +17,13 @@
 #include <linux/mtd/nand-gpio.h>
 
 #include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
 #include <mach/pxa25x.h>
-#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index a9926bb7592..b88d601a809 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -19,12 +19,12 @@
 #include <video/mbxfb.h>
 
 #include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/spi/libertas_spi.h>
 
 #include <mach/pxa27x.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
-#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index ac5598ce972..b734d846816 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -24,6 +24,7 @@
 #include <mach/pxa2xx-regs.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
+#include <mach/smemc.h>
 
 #include <asm/hardware/it8152.h>
 
@@ -392,9 +393,9 @@ static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
 	cmx2xx_pci_suspend();
 
 	/* save MSC registers */
-	sleep_save_msc[0] = MSC0;
-	sleep_save_msc[1] = MSC1;
-	sleep_save_msc[2] = MSC2;
+	sleep_save_msc[0] = __raw_readl(MSC0);
+	sleep_save_msc[1] = __raw_readl(MSC1);
+	sleep_save_msc[2] = __raw_readl(MSC2);
 
 	/* setup power saving mode registers */
 	PCFR = 0x0;
@@ -416,9 +417,9 @@ static int cmx2xx_resume(struct sys_device *dev)
 	cmx2xx_pci_resume();
 
 	/* restore MSC registers */
-	MSC0 = sleep_save_msc[0];
-	MSC1 = sleep_save_msc[1];
-	MSC2 = sleep_save_msc[2];
+	__raw_writel(sleep_save_msc[0], MSC0);
+	__raw_writel(sleep_save_msc[1], MSC1);
+	__raw_writel(sleep_save_msc[2], MSC2);
 
 	return 0;
 }
@@ -476,8 +477,6 @@ static void __init cmx2xx_init(void)
 
 static void __init cmx2xx_init_irq(void)
 {
-	pxa27x_init_irq();
-
 	if (cpu_is_pxa25x()) {
 		pxa25x_init_irq();
 		cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
@@ -500,7 +499,12 @@ static struct map_desc cmx2xx_io_desc[] __initdata = {
 
 static void __init cmx2xx_map_io(void)
 {
-	pxa_map_io();
+	if (cpu_is_pxa25x())
+		pxa25x_map_io();
+
+	if (cpu_is_pxa27x())
+		pxa27x_map_io();
+
 	iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
 
 	it8152_base_address = CMX2XX_IT8152_VIRT;
@@ -508,7 +512,11 @@ static void __init cmx2xx_map_io(void)
 #else
 static void __init cmx2xx_map_io(void)
 {
-	pxa_map_io();
+	if (cpu_is_pxa25x())
+		pxa25x_map_io();
+
+	if (cpu_is_pxa27x())
+		pxa27x_map_io();
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 922b1075b9d..7984268508b 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -857,7 +857,7 @@ static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
 
 MACHINE_START(CM_X300, "CM-X300 module")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= cm_x300_init,
diff --git a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 0f3b632c3b1..6b2c800a113 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -1,7 +1,7 @@
 /*
- *  linux/arch/arm/mach-pxa/colibri-pxa270-evalboard.c
+ *  linux/arch/arm/mach-pxa/colibri-evalboard.c
  *
- *  Support for Toradex PXA270 based Colibri Evaluation Carrier Board
+ *  Support for Toradex Colibri Evaluation Carrier Board
  *  Daniel Mack <daniel@caiaq.de>
  *  Marek Vasut <marek.vasut@gmail.com>
  *
@@ -19,6 +19,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/mach/arch.h>
+#include <linux/i2c.h>
 
 #include <mach/pxa27x.h>
 #include <mach/colibri.h>
@@ -26,86 +27,95 @@
 #include <mach/ohci.h>
 #include <mach/pxa27x-udc.h>
 
+#include <plat/i2c.h>
+
 #include "generic.h"
 #include "devices.h"
 
 /******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-	GPIO119_USBH2_PWR,
-	GPIO120_USBH2_PEN,
-};
-
-/******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static struct pxamci_platform_data colibri_pxa270_mci_platform_data = {
+static struct pxamci_platform_data colibri_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_power		= -1,
-	.gpio_card_detect	= GPIO0_COLIBRI_PXA270_SD_DETECT,
 	.gpio_card_ro		= -1,
 	.detect_delay_ms	= 200,
 };
 
-static void __init colibri_pxa270_mmc_init(void)
+static void __init colibri_mmc_init(void)
 {
-	pxa_set_mci_info(&colibri_pxa270_mci_platform_data);
+	if (machine_is_colibri())	/* PXA270 Colibri */
+		colibri_mci_platform_data.gpio_card_detect =
+			GPIO0_COLIBRI_PXA270_SD_DETECT;
+	if (machine_is_colibri300())	/* PXA300 Colibri */
+		colibri_mci_platform_data.gpio_card_detect =
+			GPIO39_COLIBRI_PXA300_SD_DETECT;
+	else				/* PXA320 Colibri */
+		colibri_mci_platform_data.gpio_card_detect =
+			GPIO28_COLIBRI_PXA320_SD_DETECT;
+
+	pxa_set_mci_info(&colibri_mci_platform_data);
 }
 #else
-static inline void colibri_pxa270_mmc_init(void) {}
+static inline void colibri_mmc_init(void) {}
 #endif
 
 /******************************************************************************
  * USB Host
  ******************************************************************************/
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int colibri_pxa270_ohci_init(struct device *dev)
+static int colibri_ohci_init(struct device *dev)
 {
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 	return 0;
 }
 
-static struct pxaohci_platform_data colibri_pxa270_ohci_info = {
+static struct pxaohci_platform_data colibri_ohci_info = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+	.flags		= ENABLE_PORT1 |
 			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
-	.init		= colibri_pxa270_ohci_init,
+	.init		= colibri_ohci_init,
 };
 
-static void __init colibri_pxa270_uhc_init(void)
+static void __init colibri_uhc_init(void)
 {
-	pxa_set_ohci_info(&colibri_pxa270_ohci_info);
+	/* Colibri PXA270 has two usb ports, TBA for 320 */
+	if (machine_is_colibri())
+		colibri_ohci_info.flags	|= ENABLE_PORT2;
+
+	pxa_set_ohci_info(&colibri_ohci_info);
 }
 #else
-static inline void colibri_pxa270_uhc_init(void) {}
+static inline void colibri_uhc_init(void) {}
 #endif
 
-void __init colibri_pxa270_evalboard_init(void)
+/******************************************************************************
+ * I2C RTC
+ ******************************************************************************/
+#if defined(CONFIG_RTC_DRV_DS1307) || defined(CONFIG_RTC_DRV_DS1307_MODULE)
+static struct i2c_board_info __initdata colibri_i2c_devs[] = {
+	{
+		I2C_BOARD_INFO("m41t00", 0x68),
+	},
+};
+
+static void __init colibri_rtc_init(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(colibri_i2c_devs));
+}
+#else
+static inline void colibri_rtc_init(void) {}
+#endif
+
+void __init colibri_evalboard_init(void)
 {
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_evalboard_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	colibri_pxa270_mmc_init();
-	colibri_pxa270_uhc_init();
+	colibri_mmc_init();
+	colibri_uhc_init();
+	colibri_rtc_init();
 }
-
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index 37f0f3ed7c6..07b62a096f1 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -46,52 +46,6 @@
 #define GPIO113_INCOME_TS_IRQ   (113)
 
 /******************************************************************************
- * Pin configuration
- ******************************************************************************/
-static mfp_cfg_t income_pin_config[] __initdata = {
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-	GPIO112_MMC_CMD,
-	GPIO0_GPIO,	/* SD detect */
-	GPIO1_GPIO,	/* SD read-only */
-
-	/* FFUART */
-	GPIO39_FFUART_TXD,
-	GPIO34_FFUART_RXD,
-
-	/* BFUART */
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO45_BTUART_RTS,
-
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* UHC */
-	GPIO88_USBH1_PWR,
-	GPIO89_USBH1_PEN,
-
-	/* LCD */
-	GPIOxx_LCD_TFT_16BPP,
-
-	/* PWM */
-	GPIO16_PWM0_OUT,
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* LED */
-	GPIO54_GPIO,	/* LED A */
-	GPIO55_GPIO,	/* LED B */
-};
-
-/******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
@@ -257,7 +211,6 @@ static inline void income_pwm_init(void) {}
 
 void __init colibri_pxa270_income_boardinit(void)
 {
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index bc045100ec1..6fc5d328ba7 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -33,6 +33,103 @@
 #include "generic.h"
 
 /******************************************************************************
+ * Evaluation board MFP
+ ******************************************************************************/
+#ifdef	 CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
+
+	/* PCMCIA */
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO49_nPWE,
+	GPIO48_nPOE,
+	GPIO57_nIOIS16,
+	GPIO56_nPWAIT,
+	GPIO104_PSKTSEL,
+	GPIO53_GPIO,	/* RESET */
+	GPIO83_GPIO,	/* BVD1 */
+	GPIO82_GPIO,	/* BVD2 */
+	GPIO1_GPIO,	/* READY */
+	GPIO84_GPIO,	/* DETECT */
+	GPIO107_GPIO,	/* PPEN */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa270_evalboard_pin_config[] __initdata = {};
+#endif
+
+#ifdef	CONFIG_MACH_COLIBRI_PXA270_INCOME
+static mfp_cfg_t income_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO0_GPIO,	/* SD detect */
+	GPIO1_GPIO,	/* SD read-only */
+
+	/* FFUART */
+	GPIO39_FFUART_TXD,
+	GPIO34_FFUART_RXD,
+
+	/* BFUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* UHC */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* LCD */
+	GPIOxx_LCD_TFT_16BPP,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* LED */
+	GPIO54_GPIO,	/* LED A */
+	GPIO55_GPIO,	/* LED B */
+};
+#else
+static mfp_cfg_t income_pin_config[] __initdata = {};
+#endif
+
+/******************************************************************************
  * Pin configuration
  ******************************************************************************/
 static mfp_cfg_t colibri_pxa270_pin_config[] __initdata = {
@@ -184,10 +281,13 @@ static void __init colibri_pxa270_init(void)
 	colibri_pxa270_tsc_init();
 
 	switch (colibri_pxa270_baseboard) {
-	case COLIBRI_PXA270_EVALBOARD:
-		colibri_pxa270_evalboard_init();
+	case COLIBRI_EVALBOARD:
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(
+			colibri_pxa270_evalboard_pin_config));
+		colibri_evalboard_init();
 		break;
 	case COLIBRI_PXA270_INCOME:
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(income_pin_config));
 		colibri_pxa270_income_boardinit();
 		break;
 	default:
@@ -209,7 +309,7 @@ static void __init colibri_pxa270_income_init(void)
 MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa270_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -217,7 +317,7 @@ MACHINE_END
 MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
 	.boot_params	= 0xa0000100,
 	.init_machine	= colibri_pxa270_income_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index a70b256591e..fddb16d07eb 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -31,9 +31,38 @@
 #include "generic.h"
 #include "devices.h"
 
+
+#ifdef CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO7_MMC1_CLK,
+	GPIO14_MMC1_CMD,
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO39_GPIO,	/* SD detect */
+
+	/* UHC */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+	GPIO77_USB_P3_1,
+	GPIO78_USB_P3_2,
+	GPIO79_USB_P3_3,
+	GPIO80_USB_P3_4,
+	GPIO81_USB_P3_5,
+	GPIO82_USB_P3_6,
+
+	/* I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
+};
+#else
+static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {};
+#endif
+
 #if defined(CONFIG_AX88796)
 #define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO26_GPIO)
-
 /*
  * Asix AX88796 Ethernet
  */
@@ -80,35 +109,6 @@ static void __init colibri_pxa300_init_eth(void)
 static inline void __init colibri_pxa300_init_eth(void) {}
 #endif /* CONFIG_AX88796 */
 
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static mfp_cfg_t colibri_pxa300_usb_pin_config[] __initdata = {
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-};
-
-static struct pxaohci_platform_data colibri_pxa300_ohci_info = {
-	.port_mode	= PMM_GLOBAL_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-void __init colibri_pxa300_init_ohci(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_usb_pin_config));
-	pxa_set_ohci_info(&colibri_pxa300_ohci_info);
-}
-#else
-static inline void colibri_pxa300_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
-static mfp_cfg_t colibri_pxa300_mmc_pin_config[] __initdata = {
-	GPIO7_MMC1_CLK,
-	GPIO14_MMC1_CMD,
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-};
-
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static mfp_cfg_t colibri_pxa300_lcd_pin_config[] __initdata = {
 	GPIO54_LCD_LDD_0,
@@ -171,24 +171,21 @@ static inline void colibri_pxa310_init_ac97(void) {}
 
 void __init colibri_pxa300_init(void)
 {
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
 	colibri_pxa300_init_eth();
-	colibri_pxa300_init_ohci();
 	colibri_pxa3xx_init_nand();
 	colibri_pxa300_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
 	colibri_pxa310_init_ac97();
-	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa300_mmc_pin_config),
-				mfp_to_gpio(MFP_PIN_GPIO13));
+
+	/* Evalboard init */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_evalboard_pin_config));
+	colibri_evalboard_init();
 }
 
 MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa300_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ca5f29e2e9c..ff9ff5f4fc4 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -35,9 +35,72 @@
 #include "generic.h"
 #include "devices.h"
 
+#ifdef	CONFIG_MACH_COLIBRI_EVALBOARD
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {
+	/* MMC */
+	GPIO22_MMC1_CLK,
+	GPIO23_MMC1_CMD,
+	GPIO18_MMC1_DAT0,
+	GPIO19_MMC1_DAT1,
+	GPIO20_MMC1_DAT2,
+	GPIO21_MMC1_DAT3,
+	GPIO28_GPIO,	/* SD detect */
+
+	/* UART 1 configuration (may be set by bootloader) */
+	GPIO99_UART1_CTS,
+	GPIO104_UART1_RTS,
+	GPIO97_UART1_RXD,
+	GPIO98_UART1_TXD,
+	GPIO101_UART1_DTR,
+	GPIO103_UART1_DSR,
+	GPIO100_UART1_DCD,
+	GPIO102_UART1_RI,
+
+	/* UART 2 configuration */
+	GPIO109_UART2_CTS,
+	GPIO112_UART2_RTS,
+	GPIO110_UART2_RXD,
+	GPIO111_UART2_TXD,
+
+	/* UART 3 configuration */
+	GPIO30_UART3_RXD,
+	GPIO31_UART3_TXD,
+
+	/* UHC */
+	GPIO2_2_USBH_PEN,
+	GPIO3_2_USBH_PWR,
+
+	/* I2C */
+	GPIO32_I2C_SCL,
+	GPIO33_I2C_SDA,
+
+	/* PCMCIA */
+	MFP_CFG(GPIO59, AF7),	/* PRST ; AF7 to tristate */
+	MFP_CFG(GPIO61, AF7),	/* PCE1 ; AF7 to tristate */
+	MFP_CFG(GPIO60, AF7),	/* PCE2 ; AF7 to tristate */
+	MFP_CFG(GPIO62, AF7),	/* PCD ; AF7 to tristate */
+	MFP_CFG(GPIO56, AF7),	/* PSKTSEL ; AF7 to tristate */
+	GPIO27_GPIO,		/* RDnWR ; input/tristate */
+	GPIO50_GPIO,		/* PREG ; input/tristate */
+	GPIO2_RDY,
+	GPIO5_NPIOR,
+	GPIO6_NPIOW,
+	GPIO7_NPIOS16,
+	GPIO8_NPWAIT,
+	GPIO29_GPIO,		/* PRDY (READY GPIO) */
+	GPIO57_GPIO,		/* PPEN (POWER GPIO) */
+	GPIO81_GPIO,		/* PCD (DETECT GPIO) */
+	GPIO77_GPIO,		/* PRST (RESET GPIO) */
+	GPIO53_GPIO,		/* PBVD1 */
+	GPIO79_GPIO,		/* PBVD2 */
+	GPIO54_GPIO,		/* POE */
+};
+#else
+static mfp_cfg_t colibri_pxa320_evalboard_pin_config[] __initdata = {};
+#endif
+
 #if defined(CONFIG_AX88796)
 #define COLIBRI_ETH_IRQ_GPIO	mfp_to_gpio(GPIO36_GPIO)
-
 /*
  * Asix AX88796 Ethernet
  */
@@ -84,26 +147,6 @@ static void __init colibri_pxa320_init_eth(void)
 static inline void __init colibri_pxa320_init_eth(void) {}
 #endif /* CONFIG_AX88796 */
 
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static mfp_cfg_t colibri_pxa320_usb_pin_config[] __initdata = {
-	GPIO2_2_USBH_PEN,
-	GPIO3_2_USBH_PWR,
-};
-
-static struct pxaohci_platform_data colibri_pxa320_ohci_info = {
-	.port_mode	= PMM_GLOBAL_MODE,
-	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
-};
-
-void __init colibri_pxa320_init_ohci(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_usb_pin_config));
-	pxa_set_ohci_info(&colibri_pxa320_ohci_info);
-}
-#else
-static inline void colibri_pxa320_init_ohci(void) {}
-#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
-
 #if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE)
 static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
 	.gpio_vbus		= mfp_to_gpio(MFP_PIN_GPIO96),
@@ -140,15 +183,6 @@ static void __init colibri_pxa320_init_udc(void)
 static inline void colibri_pxa320_init_udc(void) {}
 #endif
 
-static mfp_cfg_t colibri_pxa320_mmc_pin_config[] __initdata = {
-	GPIO22_MMC1_CLK,
-	GPIO23_MMC1_CMD,
-	GPIO18_MMC1_DAT0,
-	GPIO19_MMC1_DAT1,
-	GPIO20_MMC1_DAT2,
-	GPIO21_MMC1_DAT3
-};
-
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static mfp_cfg_t colibri_pxa320_lcd_pin_config[] __initdata = {
 	GPIO6_2_LCD_LDD_0,
@@ -205,59 +239,24 @@ static inline void __init colibri_pxa320_init_ac97(void)
 static inline void colibri_pxa320_init_ac97(void) {}
 #endif
 
-/*
- * The following configuration is verified to work with the Toradex Orchid
- * carrier board
- */
-static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
-	/* UART 1 configuration (may be set by bootloader) */
-	GPIO99_UART1_CTS,
-	GPIO104_UART1_RTS,
-	GPIO97_UART1_RXD,
-	GPIO98_UART1_TXD,
-	GPIO101_UART1_DTR,
-	GPIO103_UART1_DSR,
-	GPIO100_UART1_DCD,
-	GPIO102_UART1_RI,
-
-	/* UART 2 configuration */
-	GPIO109_UART2_CTS,
-	GPIO112_UART2_RTS,
-	GPIO110_UART2_RXD,
-	GPIO111_UART2_TXD,
-
-	/* UART 3 configuration */
-	GPIO30_UART3_RXD,
-	GPIO31_UART3_TXD,
-};
-
-static void __init colibri_pxa320_init_uart(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
-}
-
 void __init colibri_pxa320_init(void)
 {
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
 	colibri_pxa320_init_eth();
-	colibri_pxa320_init_ohci();
 	colibri_pxa3xx_init_nand();
 	colibri_pxa320_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
 	colibri_pxa320_init_ac97();
-	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
-				mfp_to_gpio(MFP_PIN_GPIO28));
-	colibri_pxa320_init_uart();
 	colibri_pxa320_init_udc();
+
+	/* Evalboard init */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_evalboard_pin_config));
+	colibri_evalboard_init();
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
 	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
 	.init_machine	= colibri_pxa320_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 199afa2ae30..96b2d9fbfef 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -64,55 +64,6 @@ void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data)
 }
 #endif
 
-#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static int mmc_detect_pin;
-
-static int colibri_pxa3xx_mci_init(struct device *dev,
-				   irq_handler_t colibri_mmc_detect_int,
-				   void *data)
-{
-	int ret;
-
-	ret = gpio_request(mmc_detect_pin, "mmc card detect");
-	if (ret)
-		return ret;
-
-	gpio_direction_input(mmc_detect_pin);
-	ret = request_irq(gpio_to_irq(mmc_detect_pin), colibri_mmc_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (ret) {
-		gpio_free(mmc_detect_pin);
-		return ret;
-	}
-
-	return 0;
-}
-
-static void colibri_pxa3xx_mci_exit(struct device *dev, void *data)
-{
-	free_irq(mmc_detect_pin, data);
-	gpio_free(gpio_to_irq(mmc_detect_pin));
-}
-
-static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
-	.detect_delay_ms	= 200,
-	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init			= colibri_pxa3xx_mci_init,
-	.exit			= colibri_pxa3xx_mci_exit,
-	.gpio_card_detect	= -1,
-	.gpio_card_ro		= -1,
-	.gpio_power		= -1,
-};
-
-void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
-{
-	pxa3xx_mfp_config(pins, len);
-	mmc_detect_pin = detect_pin;
-	pxa_set_mci_info(&colibri_pxa3xx_mci_platform_data);
-}
-#endif /* CONFIG_MMC_PXA || CONFIG_MMC_PXA_MODULE */
-
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static int lcd_bl_pin;
 
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 821229acabe..a5452a3a276 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -28,6 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
 #include <video/w100fb.h>
@@ -48,7 +49,6 @@
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
-#include <mach/pxa2xx_spi.h>
 #include <mach/corgi.h>
 #include <mach/sharpsl_pm.h>
 
@@ -721,7 +721,7 @@ static void __init fixup_corgi(struct machine_desc *desc,
 #ifdef CONFIG_MACH_CORGI
 MACHINE_START(CORGI, "SHARP Corgi")
 	.fixup		= fixup_corgi,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
@@ -731,7 +731,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_SHEPHERD
 MACHINE_START(SHEPHERD, "SHARP Shepherd")
 	.fixup		= fixup_corgi,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
@@ -741,7 +741,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_HUSKY
 MACHINE_START(HUSKY, "SHARP Husky")
 	.fixup		= fixup_corgi,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index 58093d9e07b..6a7aeab42f6 100644
--- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -38,8 +38,10 @@
 #include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/regulator/consumer.h>
+#include <linux/io.h>
 
 #include <mach/pxa2xx-regs.h>
+#include <mach/smemc.h>
 
 #ifdef DEBUG
 static unsigned int freq_debug;
@@ -242,7 +244,7 @@ static void pxa27x_guess_max_freq(void)
 
 static void init_sdram_rows(void)
 {
-	uint32_t mdcnfg = MDCNFG;
+	uint32_t mdcnfg = __raw_readl(MDCNFG);
 	unsigned int drac2 = 0, drac0 = 0;
 
 	if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3))
@@ -331,8 +333,8 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 	 * we need to preset the smaller DRI before the change.	 If we're
 	 * speeding up we need to set the larger DRI value after the change.
 	 */
-	preset_mdrefr = postset_mdrefr = MDREFR;
-	if ((MDREFR & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
+	preset_mdrefr = postset_mdrefr = __raw_readl(MDREFR);
+	if ((preset_mdrefr & MDREFR_DRI_MASK) > mdrefr_dri(new_freq_mem)) {
 		preset_mdrefr = (preset_mdrefr & ~MDREFR_DRI_MASK);
 		preset_mdrefr |= mdrefr_dri(new_freq_mem);
 	}
@@ -370,7 +372,7 @@ static int pxa_set_target(struct cpufreq_policy *policy,
 3:		nop							\n\
 	  "
 		     : "=&r" (unused)
-		     : "r" (&MDREFR), "r" (cclkcfg),
+		     : "r" (MDREFR), "r" (cclkcfg),
 		       "r" (preset_mdrefr), "r" (postset_mdrefr)
 		     : "r4", "r5");
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 57cacaff194..a305424a967 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -27,6 +27,7 @@
 #include <mach/ohci.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/audio.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -255,9 +256,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init csb726_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(csb726_pin_config));
-/*	MSC1 = 0x7ffc3ffc; *//* LAN9215/EXP_CS */
-/*	MSC2 = 0x06697ff4; *//* none/SM501 */
-	MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
+/*	__raw_writel(0x7ffc3ffc, MSC1); *//* LAN9215/EXP_CS */
+/*	__raw_writel(0x06697ff4, MSC2); *//* none/SM501 */
+	__raw_writel((__raw_readl(MSC2) & ~0xffff) | 0x7ff4, MSC2); /* SM501 */
 
 	pxa_set_ffuart_info(NULL);
 	pxa_set_btuart_info(NULL);
@@ -273,7 +274,7 @@ static void __init csb726_init(void)
 
 MACHINE_START(CSB726, "Cogent CSB726")
 	.boot_params	= 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.init_machine   = csb726_init,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index aaa1166df96..4c766e3b4af 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -3,6 +3,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/spi/pxa2xx_spi.h>
 
 #include <asm/pmu.h>
 #include <mach/udc.h>
@@ -12,7 +13,6 @@
 #include <mach/irda.h>
 #include <mach/ohci.h>
 #include <plat/pxa27x_keypad.h>
-#include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
 #include <mach/hardware.h>
@@ -342,27 +342,6 @@ struct platform_device pxa27x_device_i2c_power = {
 };
 #endif
 
-#ifdef CONFIG_PXA3xx
-static struct resource pxa3xx_resources_i2c_power[] = {
-	{
-		.start  = 0x40f500c0,
-		.end    = 0x40f500d3,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= IRQ_PWRI2C,
-		.end	= IRQ_PWRI2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device pxa3xx_device_i2c_power = {
-	.name		= "pxa3xx-pwri2c",
-	.id		= 1,
-	.resource	= pxa3xx_resources_i2c_power,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
-};
-#endif
-
 static struct resource pxai2s_resources[] = {
 	{
 		.start	= 0x40400000,
@@ -633,30 +612,35 @@ struct platform_device pxa25x_device_assp = {
 #endif /* CONFIG_PXA25x */
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-static struct resource pxa27x_resource_keypad[] = {
+static struct resource pxa27x_resource_camera[] = {
 	[0] = {
-		.start	= 0x41500000,
-		.end	= 0x4150004c,
+		.start	= 0x50000000,
+		.end	= 0x50000fff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= IRQ_KEYPAD,
-		.end	= IRQ_KEYPAD,
+		.start	= IRQ_CAMERA,
+		.end	= IRQ_CAMERA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-struct platform_device pxa27x_device_keypad = {
-	.name		= "pxa27x-keypad",
-	.id		= -1,
-	.resource	= pxa27x_resource_keypad,
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
+static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
+
+static struct platform_device pxa27x_device_camera = {
+	.name		= "pxa27x-camera",
+	.id		= 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask      		= &pxa27x_dma_mask_camera,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
+	.resource	= pxa27x_resource_camera,
 };
 
-void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
 {
-	pxa_register_device(&pxa27x_device_keypad, info);
+	pxa_register_device(&pxa27x_device_camera, info);
 }
 
 static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
@@ -689,6 +673,33 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
 {
 	pxa_register_device(&pxa27x_device_ohci, info);
 }
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+static struct resource pxa27x_resource_keypad[] = {
+	[0] = {
+		.start	= 0x41500000,
+		.end	= 0x4150004c,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_KEYPAD,
+		.end	= IRQ_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa27x_device_keypad = {
+	.name		= "pxa27x-keypad",
+	.id		= -1,
+	.resource	= pxa27x_resource_keypad,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
+};
+
+void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+{
+	pxa_register_device(&pxa27x_device_keypad, info);
+}
 
 static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
 
@@ -833,79 +844,9 @@ struct platform_device pxa27x_device_pwm1 = {
 	.resource	= pxa27x_resource_pwm1,
 	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm1),
 };
-
-static struct resource pxa27x_resource_camera[] = {
-	[0] = {
-		.start	= 0x50000000,
-		.end	= 0x50000fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_CAMERA,
-		.end	= IRQ_CAMERA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
-
-static struct platform_device pxa27x_device_camera = {
-	.name		= "pxa27x-camera",
-	.id		= 0, /* This is used to put cameras on this interface */
-	.dev		= {
-		.dma_mask      		= &pxa27x_dma_mask_camera,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
-	.resource	= pxa27x_resource_camera,
-};
-
-void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
-{
-	pxa_register_device(&pxa27x_device_camera, info);
-}
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
 
 #ifdef CONFIG_PXA3xx
-static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource pxa3xx_resource_ssp4[] = {
-	[0] = {
-		.start	= 0x41a00000,
-		.end	= 0x41a0003f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SSP4,
-		.end	= IRQ_SSP4,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		/* DRCMR for RX */
-		.start	= 2,
-		.end	= 2,
-		.flags	= IORESOURCE_DMA,
-	},
-	[3] = {
-		/* DRCMR for TX */
-		.start	= 3,
-		.end	= 3,
-		.flags	= IORESOURCE_DMA,
-	},
-};
-
-struct platform_device pxa3xx_device_ssp4 = {
-	/* PXA3xx SSP is basically equivalent to PXA27x */
-	.name		= "pxa27x-ssp",
-	.id		= 3,
-	.dev		= {
-		.dma_mask = &pxa3xx_ssp4_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.resource	= pxa3xx_resource_ssp4,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
-};
-
 static struct resource pxa3xx_resources_mci2[] = {
 	[0] = {
 		.start	= 0x42000000,
@@ -984,6 +925,54 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
 	pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_gcu[] = {
+	{
+		.start	= 0x54000000,
+		.end	= 0x54000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_GCU,
+		.end	= IRQ_GCU,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+	.name		= "pxa3xx-gcu",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
+	.resource	= pxa3xx_resources_gcu,
+	.dev		= {
+		.dma_mask = &pxa3xx_gcu_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
+#endif /* CONFIG_PXA3xx */
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+static struct resource pxa3xx_resources_i2c_power[] = {
+	{
+		.start  = 0x40f500c0,
+		.end    = 0x40f500d3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+	.name		= "pxa3xx-pwri2c",
+	.id		= 1,
+	.resource	= pxa3xx_resources_i2c_power,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_i2c_power),
+};
+
 static struct resource pxa3xx_resources_nand[] = {
 	[0] = {
 		.start	= 0x43100000,
@@ -1027,33 +1016,45 @@ void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
 	pxa_register_device(&pxa3xx_device_nand, info);
 }
 
-static struct resource pxa3xx_resources_gcu[] = {
-	{
-		.start	= 0x54000000,
-		.end	= 0x54000fff,
+static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource pxa3xx_resource_ssp4[] = {
+	[0] = {
+		.start	= 0x41a00000,
+		.end	= 0x41a0003f,
 		.flags	= IORESOURCE_MEM,
 	},
-	{
-		.start	= IRQ_GCU,
-		.end	= IRQ_GCU,
+	[1] = {
+		.start	= IRQ_SSP4,
+		.end	= IRQ_SSP4,
 		.flags	= IORESOURCE_IRQ,
 	},
+	[2] = {
+		/* DRCMR for RX */
+		.start	= 2,
+		.end	= 2,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for TX */
+		.start	= 3,
+		.end	= 3,
+		.flags	= IORESOURCE_DMA,
+	},
 };
 
-static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device pxa3xx_device_gcu = {
-	.name		= "pxa3xx-gcu",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
-	.resource	= pxa3xx_resources_gcu,
+struct platform_device pxa3xx_device_ssp4 = {
+	/* PXA3xx SSP is basically equivalent to PXA27x */
+	.name		= "pxa27x-ssp",
+	.id		= 3,
 	.dev		= {
-		.dma_mask = &pxa3xx_gcu_dmamask,
-		.coherent_dma_mask = 0xffffffff,
+		.dma_mask = &pxa3xx_ssp4_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
+	.resource	= pxa3xx_resource_ssp4,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resource_ssp4),
 };
-
-#endif /* CONFIG_PXA3xx */
+#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
 
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
  * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index ed0dbfdb22e..a78bb309773 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -26,6 +26,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
 #include <linux/spi/libertas_spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/power_supply.h>
 #include <linux/apm-emulation.h>
 #include <linux/i2c.h>
@@ -46,7 +47,6 @@
 #include <plat/pxa27x_keypad.h>
 #include <plat/i2c.h>
 #include <mach/camera.h>
-#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -1300,7 +1300,7 @@ static void __init em_x270_init(void)
 
 MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
@@ -1308,7 +1308,7 @@ MACHINE_END
 
 MACHINE_START(EXEDA, "Compulab eXeda")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index b25690ccadc..edca0a04329 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -181,7 +181,7 @@ static void __init e330_init(void)
 MACHINE_START(E330, "Toshiba e330")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -230,7 +230,7 @@ static void __init e350_init(void)
 MACHINE_START(E350, "Toshiba e350")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -352,7 +352,7 @@ static void __init e400_init(void)
 MACHINE_START(E400, "Toshiba e400")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -540,7 +540,7 @@ static void __init e740_init(void)
 MACHINE_START(E740, "Toshiba e740")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -731,7 +731,7 @@ static void __init e750_init(void)
 MACHINE_START(E750, "Toshiba e750")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
@@ -926,7 +926,7 @@ static void __init e800_init(void)
 MACHINE_START(E800, "Toshiba e800")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= ESERIES_NR_IRQS,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 142c711f4cd..87cec0abe5b 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -798,7 +798,7 @@ static void __init a780_init(void)
 
 MACHINE_START(EZX_A780, "Motorola EZX A780")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -863,7 +863,7 @@ static void __init e680_init(void)
 
 MACHINE_START(EZX_E680, "Motorola EZX E680")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -928,7 +928,7 @@ static void __init a1200_init(void)
 
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -1118,7 +1118,7 @@ static void __init a910_init(void)
 
 MACHINE_START(EZX_A910, "Motorola EZX A910")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -1183,7 +1183,7 @@ static void __init e6_init(void)
 
 MACHINE_START(EZX_E6, "Motorola EZX E6")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -1222,7 +1222,7 @@ static void __init e2_init(void)
 
 MACHINE_START(EZX_E2, "Motorola EZX E2")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.nr_irqs	= EZX_NR_IRQS,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 6451e9c3a93..d6e15f71fc0 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -28,6 +28,8 @@
 
 #include <mach/reset.h>
 #include <mach/gpio.h>
+#include <mach/smemc.h>
+#include <mach/pxa3xx-regs.h>
 
 #include "generic.h"
 
@@ -35,9 +37,10 @@ void clear_reset_status(unsigned int mask)
 {
 	if (cpu_is_pxa2xx())
 		pxa2xx_clear_reset_status(mask);
-
-	if (cpu_is_pxa3xx())
-		pxa3xx_clear_reset_status(mask);
+	else {
+		/* RESET_STATUS_* has a 1:1 mapping with ARSR */
+		ARSR = mask;
+	}
 }
 
 unsigned long get_clock_tick_rate(void)
@@ -71,47 +74,17 @@ unsigned int get_clk_frequency_khz(int info)
 EXPORT_SYMBOL(get_clk_frequency_khz);
 
 /*
- * Return the current memory clock frequency in units of 10kHz
- */
-unsigned int get_memclk_frequency_10khz(void)
-{
-	if (cpu_is_pxa25x())
-		return pxa25x_get_memclk_frequency_10khz();
-	else if (cpu_is_pxa27x())
-		return pxa27x_get_memclk_frequency_10khz();
-	return 0;
-}
-EXPORT_SYMBOL(get_memclk_frequency_10khz);
-
-/*
  * Intel PXA2xx internal register mapping.
  *
- * Note 1: not all PXA2xx variants implement all those addresses.
- *
- * Note 2: virtual 0xfffe0000-0xffffffff is reserved for the vector table
- *         and cache flush area.
+ * Note: virtual 0xfffe0000-0xffffffff is reserved for the vector table
+ *       and cache flush area.
  */
-static struct map_desc standard_io_desc[] __initdata = {
+static struct map_desc common_io_desc[] __initdata = {
   	{	/* Devs */
 		.virtual	=  0xf2000000,
 		.pfn		= __phys_to_pfn(0x40000000),
 		.length		= 0x02000000,
 		.type		= MT_DEVICE
-	}, {	/* Mem Ctl */
-		.virtual	=  0xf6000000,
-		.pfn		= __phys_to_pfn(0x48000000),
-		.length		= 0x00200000,
-		.type		= MT_DEVICE
-	}, {	/* Camera */
-		.virtual	=  0xfa000000,
-		.pfn		= __phys_to_pfn(0x50000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {	/* IMem ctl */
-		.virtual	=  0xfe000000,
-		.pfn		= __phys_to_pfn(0x58000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
 	}, {	/* UNCACHED_PHYS_0 */
 		.virtual	= 0xff000000,
 		.pfn		= __phys_to_pfn(0x00000000),
@@ -122,6 +95,5 @@ static struct map_desc standard_io_desc[] __initdata = {
 
 void __init pxa_map_io(void)
 {
-	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
-	get_clk_frequency_khz(1);
+	iotable_init(ARRAY_AND_SIZE(common_io_desc));
 }
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 4b1ad2769ed..6205dc9a2b9 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -20,7 +20,12 @@ extern void __init pxa26x_init_irq(void);
 #endif
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
+extern void __init pxa95x_init_irq(void);
+
 extern void __init pxa_map_io(void);
+extern void __init pxa25x_map_io(void);
+extern void __init pxa27x_map_io(void);
+extern void __init pxa3xx_map_io(void);
 
 extern unsigned int get_clk_frequency_khz(int info);
 
@@ -32,18 +37,14 @@ extern unsigned int get_clk_frequency_khz(int info);
 
 #ifdef CONFIG_PXA25x
 extern unsigned pxa25x_get_clk_frequency_khz(int);
-extern unsigned pxa25x_get_memclk_frequency_10khz(void);
 #else
 #define pxa25x_get_clk_frequency_khz(x)		(0)
-#define pxa25x_get_memclk_frequency_10khz()	(0)
 #endif
 
 #ifdef CONFIG_PXA27x
 extern unsigned pxa27x_get_clk_frequency_khz(int);
-extern unsigned pxa27x_get_memclk_frequency_10khz(void);
 #else
 #define pxa27x_get_clk_frequency_khz(x)		(0)
-#define pxa27x_get_memclk_frequency_10khz()	(0)
 #endif
 
 #if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
@@ -54,10 +55,8 @@ static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
 
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
-extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
-static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 
 extern struct sysdev_class pxa_irq_sysclass;
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 1e2a9a13aec..6fd319ea528 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -225,7 +225,7 @@ static void __init gumstix_init(void)
 
 MACHINE_START(GUMSTIX, "Gumstix")
 	.boot_params	= 0xa0000100, /* match u-boot bi_boot_params */
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= gumstix_init,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 7057a1f46db..657db469de1 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -32,6 +32,7 @@
 #include <mach/pxa25x.h>
 #include <mach/h5000.h>
 #include <mach/udc.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 
@@ -172,11 +173,11 @@ static unsigned long h5000_pin_config[] __initdata = {
 
 static void fix_msc(void)
 {
-	MSC0 = 0x129c24f2;
-	MSC1 = 0x7ff424fa;
-	MSC2 = 0x7ff47ff4;
+	__raw_writel(0x129c24f2, MSC0);
+	__raw_writel(0x7ff424fa, MSC1);
+	__raw_writel(0x7ff47ff4, MSC2);
 
-	MDREFR |= 0x02080000;
+	__raw_writel(__raw_readl(MDREFR) | 0x02080000, MDREFR);
 }
 
 /*
@@ -202,7 +203,7 @@ static void __init h5000_init(void)
 
 MACHINE_START(H5400, "HP iPAQ H5000")
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa25x_map_io,
 	.init_irq = pxa25x_init_irq,
 	.timer = &pxa_timer,
 	.init_machine = h5000_init,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 01b7f07ebad..e8603eba54b 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -160,7 +160,7 @@ static void __init himalaya_init(void)
 
 MACHINE_START(HIMALAYA, "HTC Himalaya")
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa25x_map_io,
 	.init_irq = pxa25x_init_irq,
 	.init_machine = himalaya_init,
 	.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 76d93a25bab..a908e0a5f39 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -33,6 +33,7 @@
 #include <linux/regulator/max1586.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/usb/gpio_vbus.h>
 
 #include <mach/hardware.h>
@@ -43,7 +44,6 @@
 #include <mach/hx4700.h>
 #include <plat/i2c.h>
 #include <mach/irda.h>
-#include <mach/pxa2xx_spi.h>
 
 #include <video/platform_lcd.h>
 #include <video/w100fb.h>
@@ -871,7 +871,7 @@ static void __init hx4700_init(void)
 
 MACHINE_START(H4700, "HP iPAQ HX4700")
 	.boot_params  = 0xa0000100,
-	.map_io       = pxa_map_io,
+	.map_io       = pxa27x_map_io,
 	.nr_irqs      = HX4700_NR_IRQS,
 	.init_irq     = pxa27x_init_irq,
 	.init_machine = hx4700_init,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index d51ee3d25e7..6cedc81da3b 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -24,7 +24,7 @@
 #include <mach/mxm8x10.h>
 
 #include <linux/spi/spi.h>
-#include <mach/pxa2xx_spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/can/platform/mcp251x.h>
 
 #include "generic.h"
@@ -192,7 +192,7 @@ static void __init icontrol_init(void)
 
 MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= icontrol_init
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index e773dceeabc..dd40e4a9291 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -187,7 +187,7 @@ static struct map_desc idp_io_desc[] __initdata = {
 
 static void __init idp_map_io(void)
 {
-	pxa_map_io();
+	pxa25x_map_io();
 	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
 }
 
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
new file mode 100644
index 00000000000..f4c03659168
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -0,0 +1,48 @@
+#ifndef __ASM_MACH_ADDR_MAP_H
+#define __ASM_MACH_ADDR_MAP_H
+
+/*
+ * Chip Selects
+ */
+#define PXA_CS0_PHYS		0x00000000
+#define PXA_CS1_PHYS		0x04000000
+#define PXA_CS2_PHYS		0x08000000
+#define PXA_CS3_PHYS		0x0C000000
+#define PXA_CS4_PHYS		0x10000000
+#define PXA_CS5_PHYS		0x14000000
+
+#define PXA300_CS0_PHYS		0x00000000	/* PXA300/PXA310 _only_ */
+#define PXA300_CS1_PHYS		0x30000000	/* PXA300/PXA310 _only_ */
+#define PXA3xx_CS2_PHYS		0x10000000
+#define PXA3xx_CS3_PHYS		0x14000000
+
+/*
+ * Peripheral Bus
+ */
+#define PERIPH_PHYS		0x40000000
+#define PERIPH_VIRT		0xf2000000
+#define PERIPH_SIZE		0x02000000
+
+/*
+ * Static Memory Controller (w/ SDRAM controls on PXA25x/PXA27x)
+ */
+#define PXA2XX_SMEMC_PHYS	0x48000000
+#define PXA3XX_SMEMC_PHYS	0x4a000000
+#define SMEMC_VIRT		0xf6000000
+#define SMEMC_SIZE		0x00100000
+
+/*
+ * Dynamic Memory Controller (only on PXA3xx)
+ */
+#define DMEMC_PHYS		0x48100000
+#define DMEMC_VIRT		0xf6100000
+#define DMEMC_SIZE		0x00100000
+
+/*
+ * Internal Memory Controller (PXA27x and later)
+ */
+#define IMEMC_PHYS		0x58000000
+#define IMEMC_VIRT		0xfe000000
+#define IMEMC_SIZE		0x00100000
+
+#endif /* __ASM_MACH_ADDR_MAP_H */
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 561562b4360..7074e76146c 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -26,6 +26,8 @@ enum balloon3_features {
 #define BALLOON3_FPGA_VIRT	(0xf1000000)	/* as per balloon2 */
 #define BALLOON3_FPGA_LENGTH	0x01000000
 
+#define	BALLOON3_FPGA_SETnCLR		(0x1000)
+
 /* FPGA / CPLD registers for CF socket */
 #define	BALLOON3_CF_STATUS_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
 #define	BALLOON3_CF_CONTROL_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
@@ -35,7 +37,7 @@ enum balloon3_features {
 #define	BALLOON3_NAND_BASE		(PXA_CS4_PHYS + 0x00e00000)
 #define	BALLOON3_NAND_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
 #define	BALLOON3_NAND_CONTROL2_REG	(BALLOON3_FPGA_VIRT + 0x00e00010)
-#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define	BALLOON3_NAND_STAT_REG		(BALLOON3_FPGA_VIRT + 0x00e00014)
 #define	BALLOON3_NAND_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e00014)
 
 /* fpga/cpld interrupt control register */
@@ -174,7 +176,7 @@ enum balloon3_features {
 #define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
 #define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
 
-#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 4)
+#define BALLOON3_NR_IRQS	(IRQ_BOARD_START + 16)
 
 extern int balloon3_has(enum balloon3_features feature);
 
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 58dada11054..388a96f1ef9 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -9,14 +9,14 @@
  */
 
 enum {
-	COLIBRI_PXA270_EVALBOARD = 0,
+	COLIBRI_EVALBOARD = 0,
 	COLIBRI_PXA270_INCOME,
 };
 
-#if defined(CONFIG_MACH_COLIBRI_PXA270_EVALBOARD)
-extern void colibri_pxa270_evalboard_init(void);
+#if defined(CONFIG_MACH_COLIBRI_EVALBOARD)
+extern void colibri_evalboard_init(void);
 #else
-static inline void colibri_pxa270_evalboard_init(void) {}
+static inline void colibri_evalboard_init(void) {}
 #endif
 
 #if defined(CONFIG_MACH_COLIBRI_PXA270_INCOME)
@@ -59,5 +59,11 @@ static inline void colibri_pxa3xx_init_nand(void) {}
 #define GPIO0_COLIBRI_PXA270_SD_DETECT	0
 #define GPIO113_COLIBRI_PXA270_TS_IRQ	113
 
+/* GPIO definitions for Colibri PXA300/310 */
+#define GPIO39_COLIBRI_PXA300_SD_DETECT	39
+
+/* GPIO definitions for Colibri PXA320 */
+#define GPIO28_COLIBRI_PXA320_SD_DETECT	28
+
 #endif /* _COLIBRI_H_ */
 
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 814f1458a06..6957ba56025 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
+#include <mach/addr-map.h>
+
 /*
  * Workarounds for at least 2 errata so far require this.
  * The mapping is set in mach-pxa/generic.c.
@@ -193,14 +195,15 @@
 #define __cpu_is_pxa935(id)	(0)
 #endif
 
-#ifdef CONFIG_CPU_PXA950
-#define __cpu_is_pxa950(id)                             \
-	({                                              \
+#ifdef CONFIG_CPU_PXA955
+#define __cpu_is_pxa955(id)				\
+	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x697;				\
-	 })
+		_id == 0x581 || _id == 0xc08		\
+			|| _id == 0xb76;		\
+	})
 #else
-#define __cpu_is_pxa950(id)	(0)
+#define __cpu_is_pxa955(id)	(0)
 #endif
 
 #define cpu_is_pxa210()					\
@@ -253,16 +256,15 @@
 		__cpu_is_pxa935(read_cpuid_id());	\
 	 })
 
-#define cpu_is_pxa950()					\
+#define cpu_is_pxa955()					\
 	({						\
-		__cpu_is_pxa950(read_cpuid_id());	\
-	 })
+		__cpu_is_pxa955(read_cpuid_id());	\
+	})
 
 
 /*
  * CPUID Core Generation Bit
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
- * == 0x3 for pxa300/pxa310/pxa320
  */
 #if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
 #define __cpu_is_pxa2xx(id)				\
@@ -277,8 +279,10 @@
 #ifdef CONFIG_PXA3xx
 #define __cpu_is_pxa3xx(id)				\
 	({						\
-		unsigned int _id = (id) >> 13 & 0x7;	\
-		_id == 0x3;				\
+		__cpu_is_pxa300(id)			\
+			|| __cpu_is_pxa310(id)		\
+			|| __cpu_is_pxa320(id)		\
+			|| __cpu_is_pxa93x(id);		\
 	 })
 #else
 #define __cpu_is_pxa3xx(id)	(0)
@@ -287,13 +291,22 @@
 #if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935)
 #define __cpu_is_pxa93x(id)				\
 	({						\
-		unsigned int _id = (id) >> 4 & 0xfff;	\
-		_id == 0x683 || _id == 0x693;		\
+		__cpu_is_pxa930(id)			\
+			|| __cpu_is_pxa935(id);		\
 	 })
 #else
 #define __cpu_is_pxa93x(id)	(0)
 #endif
 
+#ifdef CONFIG_PXA95x
+#define __cpu_is_pxa95x(id)				\
+	({						\
+		__cpu_is_pxa955(id);			\
+	})
+#else
+#define __cpu_is_pxa95x(id)	(0)
+#endif
+
 #define cpu_is_pxa2xx()					\
 	({						\
 		__cpu_is_pxa2xx(read_cpuid_id());	\
@@ -308,6 +321,12 @@
 	({						\
 		__cpu_is_pxa93x(read_cpuid_id());	\
 	 })
+
+#define cpu_is_pxa95x()					\
+	({						\
+		__cpu_is_pxa95x(read_cpuid_id());	\
+	})
+
 /*
  * return current memory and LCD clock frequency in units of 10kHz
  */
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index d372caa75dc..a4285fc0087 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -21,16 +21,14 @@
 
 #define PXA_IRQ(x)	(PXA_ISA_IRQ_NUM + (x))
 
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
 #define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
-#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
-#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI,PXA27x) */
+#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI,PXA27x) */
 #define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
-#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
+#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt (PXA27x) */
+#define IRQ_ACIPC0	PXA_IRQ(5)	/* AP-CP Communication (PXA930) */
 #define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
-#endif
-
 #define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
 #define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
 #define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
@@ -38,7 +36,8 @@
 #define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
 #define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
 #define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
-#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
+#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt (PXA27x) */
+#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request (PXA3xx) */
 #define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
 #define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
 #define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
@@ -47,6 +46,7 @@
 #define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
 #define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
 #define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
+#define IRQ_ACIPC2	PXA_IRQ(19)	/* AP-CP Communication (PXA930) */
 #define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
 #define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
 #define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
@@ -60,19 +60,17 @@
 #define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
 #define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
 
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 #define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
 #define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
-#endif
-
-#ifdef CONFIG_PXA3xx
-#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
 #define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
 #define IRQ_COMM_WDT	PXA_IRQ(35) 	/* Comm WDT interrupt */
 #define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
+#define IRQ_ENHROT	PXA_IRQ(37)	/* Enhanced Rotary (PXA930) */
 #define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GCU		PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_GCU		PXA_IRQ(39)	/* Graphics Controller (PXA3xx) */
+#define IRQ_ACIPC1	PXA_IRQ(40)	/* AP-CP Communication (PXA930) */
 #define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
+#define IRQ_TRKBALL	PXA_IRQ(43)	/* Track Ball (PXA930) */
 #define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
 #define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
 #define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
@@ -80,30 +78,14 @@
 #define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
 #define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
 #define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
-#endif
 
-#ifdef CONFIG_CPU_PXA935
 #define IRQ_U2O		PXA_IRQ(64)	/* USB OTG 2.0 Controller (PXA935) */
 #define IRQ_U2H		PXA_IRQ(65)	/* USB Host 2.0 Controller (PXA935) */
-
-#define IRQ_MMC3_PXA935	PXA_IRQ(72)	/* MMC3 Controller (PXA935) */
-#define IRQ_MMC4_PXA935	PXA_IRQ(73)	/* MMC4 Controller (PXA935) */
-#define IRQ_MMC5_PXA935	PXA_IRQ(74)	/* MMC5 Controller (PXA935) */
-
+#define IRQ_PXA935_MMC0	PXA_IRQ(72)	/* MMC0 Controller (PXA935) */
+#define IRQ_PXA935_MMC1	PXA_IRQ(73)	/* MMC1 Controller (PXA935) */
+#define IRQ_PXA935_MMC2	PXA_IRQ(74)	/* MMC2 Controller (PXA935) */
+#define IRQ_PXA955_MMC3	PXA_IRQ(75)	/* MMC3 Controller (PXA955) */
 #define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
-#endif
-
-#ifdef CONFIG_CPU_PXA930
-#define IRQ_ENHROT	PXA_IRQ(37)	/* Enhanced Rotary (PXA930) */
-#define IRQ_ACIPC0	PXA_IRQ(5)
-#define IRQ_ACIPC1	PXA_IRQ(40)
-#define IRQ_ACIPC2	PXA_IRQ(19)
-#define IRQ_TRKBALL	PXA_IRQ(43)	/* Track Ball */
-#endif
-
-#ifdef CONFIG_CPU_PXA950
-#define IRQ_GC500	PXA_IRQ(70)	/* Graphics Controller (PXA950) */
-#endif
 
 #define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)
 #define PXA_GPIO_IRQ_NUM	(192)
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
index 4fcddd9cab7..ee6ced1cea7 100644
--- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -17,72 +17,6 @@
 #include <mach/hardware.h>
 
 /*
- * PXA Chip selects
- */
-
-#define PXA_CS0_PHYS	0x00000000
-#define PXA_CS1_PHYS	0x04000000
-#define PXA_CS2_PHYS	0x08000000
-#define PXA_CS3_PHYS	0x0C000000
-#define PXA_CS4_PHYS	0x10000000
-#define PXA_CS5_PHYS	0x14000000
-
-/*
- * Memory controller
- */
-
-#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
-#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
-#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
-#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
-#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
-#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
-#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
-#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
-#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
-#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
-#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
-#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
-#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
-#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
-#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
-#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
-#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
-
-/*
- * More handy macros for PCMCIA
- *
- * Arg is socket number
- */
-#define MCMEM(s)	__REG2(0x48000028, (s)<<2 )  /* Card interface Common Memory Space Socket s Timing */
-#define MCATT(s)	__REG2(0x48000030, (s)<<2 )  /* Card interface Attribute Space Socket s Timing Configuration */
-#define MCIO(s)		__REG2(0x48000038, (s)<<2 )  /* Card interface I/O Space Socket s Timing Configuration */
-
-/* MECR register defines */
-#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
-#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
-
-#define MDCNFG_DE0	(1 << 0)	/* SDRAM Bank 0 Enable */
-#define MDCNFG_DE1	(1 << 1)	/* SDRAM Bank 1 Enable */
-#define MDCNFG_DE2	(1 << 16)	/* SDRAM Bank 2 Enable */
-#define MDCNFG_DE3	(1 << 17)	/* SDRAM Bank 3 Enable */
-
-#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
-#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
-#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
-#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
-#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
-#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
-#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
-#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
-#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
-#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
-#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
-#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
-#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
-#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
-
-/*
  * Power Manager
  */
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
deleted file mode 100644
index b87cecd9bbd..00000000000
--- a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef PXA2XX_SPI_H_
-#define PXA2XX_SPI_H_
-
-#define PXA2XX_CS_ASSERT (0x01)
-#define PXA2XX_CS_DEASSERT (0x02)
-
-/* device.platform_data for SSP controller devices */
-struct pxa2xx_spi_master {
-	u32 clock_enable;
-	u16 num_chipselect;
-	u8 enable_dma;
-};
-
-/* spi_board_info.controller_data for SPI slave devices,
- * copied to spi_device.platform_data ... mostly for dma tuning
- */
-struct pxa2xx_spi_chip {
-	u8 tx_threshold;
-	u8 rx_threshold;
-	u8 dma_burst_size;
-	u32 timeout;
-	u8 enable_loopback;
-	int gpio_cs;
-	void (*cs_control)(u32 command);
-};
-
-extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
-
-#endif /*PXA2XX_SPI_H_*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index e91d63cfe81..e4fb4668c26 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -16,15 +16,6 @@
 #include <mach/hardware.h>
 
 /*
- * Static Chip Selects
- */
-
-#define PXA300_CS0_PHYS		(0x00000000)	/* PXA300/PXA310 _only_ */
-#define PXA300_CS1_PHYS		(0x30000000)	/* PXA300/PXA310 _only_ */
-#define PXA3xx_CS2_PHYS		(0x10000000)
-#define PXA3xx_CS3_PHYS		(0x14000000)
-
-/*
  * Oscillator Configuration Register (OSCC)
  */
 #define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
index 68464ce1c1e..662288eb6f9 100644
--- a/arch/arm/mach-pxa/include/mach/regs-intc.h
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -27,8 +27,4 @@
 #define ICFP3		__REG(0x40D0013C)  /* Interrupt Controller FIQ Pending Register 3 */
 #define ICPR3		__REG(0x40D00140)  /* Interrupt Controller Pending Register 3 */
 
-#define IPR(x)		__REG(0x40D0001C + (x < 32 ? (x << 2)		\
-				: (x < 64 ? (0x94 + ((x - 32) << 2))	\
-				: (0x128 + ((x - 64) << 2)))))
-
 #endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/include/mach/smemc.h
new file mode 100644
index 00000000000..654adc90c9a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/smemc.h
@@ -0,0 +1,74 @@
+/*
+ * Static memory controller register definitions for PXA CPUs
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SMEMC_REGS_H
+#define __SMEMC_REGS_H
+
+#define PXA2XX_SMEMC_BASE	0x48000000
+#define PXA3XX_SMEMC_BASE	0x4a000000
+#define SMEMC_VIRT		0xf6000000
+
+#define MDCNFG		(SMEMC_VIRT + 0x00)  /* SDRAM Configuration Register 0 */
+#define MDREFR		(SMEMC_VIRT + 0x04)  /* SDRAM Refresh Control Register */
+#define MSC0		(SMEMC_VIRT + 0x08)  /* Static Memory Control Register 0 */
+#define MSC1		(SMEMC_VIRT + 0x0C)  /* Static Memory Control Register 1 */
+#define MSC2		(SMEMC_VIRT + 0x10)  /* Static Memory Control Register 2 */
+#define MECR		(SMEMC_VIRT + 0x14)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		(SMEMC_VIRT + 0x18)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		(SMEMC_VIRT + 0x1C)  /* Synchronous Static Memory Control Register */
+#define SXMRS		(SMEMC_VIRT + 0x24)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		(SMEMC_VIRT + 0x28)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		(SMEMC_VIRT + 0x2C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		(SMEMC_VIRT + 0x30)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		(SMEMC_VIRT + 0x34)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		(SMEMC_VIRT + 0x38)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		(SMEMC_VIRT + 0x3C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		(SMEMC_VIRT + 0x40)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	(SMEMC_VIRT + 0x44)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+#define MEMCLKCFG	(SMEMC_VIRT + 0x68)  /* Clock Configuration */
+#define CSADRCFG0	(SMEMC_VIRT + 0x80)  /* Address Configuration Register for CS0 */
+#define CSADRCFG1	(SMEMC_VIRT + 0x84)  /* Address Configuration Register for CS1 */
+#define CSADRCFG2	(SMEMC_VIRT + 0x88)  /* Address Configuration Register for CS2 */
+#define CSADRCFG3	(SMEMC_VIRT + 0x8C)  /* Address Configuration Register for CS3 */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s)	(SMEMC_VIRT + 0x28 + ((s)<<2))  /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s)	(SMEMC_VIRT + 0x30 + ((s)<<2))  /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s)		(SMEMC_VIRT + 0x38 + ((s)<<2))  /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDCNFG_DE0	(1 << 0)	/* SDRAM Bank 0 Enable */
+#define MDCNFG_DE1	(1 << 1)	/* SDRAM Bank 1 Enable */
+#define MDCNFG_DE2	(1 << 16)	/* SDRAM Bank 2 Enable */
+#define MDCNFG_DE3	(1 << 17)	/* SDRAM Bank 3 Enable */
+
+#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+
+#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 1beb40f692f..54e91c9e71c 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -16,20 +16,31 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
+#include <linux/irq.h>
 
 #include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
+#include <mach/irqs.h>
 #include <mach/gpio.h>
-#include <mach/regs-intc.h>
 
 #include "generic.h"
 
-#define MAX_INTERNAL_IRQS	128
+#define IRQ_BASE		(void __iomem *)io_p2v(0x40d00000)
+
+#define ICIP			(0x000)
+#define ICMR			(0x004)
+#define ICLR			(0x008)
+#define ICFR			(0x00c)
+#define ICPR			(0x010)
+#define ICCR			(0x014)
+#define ICHP			(0x018)
+#define IPR(i)			(((i) < 32) ? (0x01c + ((i) << 2)) :		\
+				((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) :	\
+				      (0x144 + (((i) - 64) << 2)))
+#define IPR_VALID		(1 << 31)
+#define IRQ_BIT(n)		(((n) - PXA_IRQ(0)) & 0x1f)
 
-#define IRQ_BIT(n)	(((n) - PXA_IRQ(0)) & 0x1f)
-#define _ICMR(n)	(*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR))
-#define _ICLR(n)	(*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR))
+#define MAX_INTERNAL_IRQS	128
 
 /*
  * This is for peripheral IRQs internal to the PXA chip.
@@ -37,14 +48,27 @@
 
 static int pxa_internal_irq_nr;
 
+static inline int cpu_has_ipr(void)
+{
+	return !cpu_is_pxa25x();
+}
+
 static void pxa_mask_irq(unsigned int irq)
 {
-	_ICMR(irq) &= ~(1 << IRQ_BIT(irq));
+	void __iomem *base = get_irq_chip_data(irq);
+	uint32_t icmr = __raw_readl(base + ICMR);
+
+	icmr &= ~(1 << IRQ_BIT(irq));
+	__raw_writel(icmr, base + ICMR);
 }
 
 static void pxa_unmask_irq(unsigned int irq)
 {
-	_ICMR(irq) |= 1 << IRQ_BIT(irq);
+	void __iomem *base = get_irq_chip_data(irq);
+	uint32_t icmr = __raw_readl(base + ICMR);
+
+	icmr |= 1 << IRQ_BIT(irq);
+	__raw_writel(icmr, base + ICMR);
 }
 
 static struct irq_chip pxa_internal_irq_chip = {
@@ -86,12 +110,16 @@ static void pxa_ack_low_gpio(unsigned int irq)
 
 static void pxa_mask_low_gpio(unsigned int irq)
 {
-	ICMR &= ~(1 << (irq - PXA_IRQ(0)));
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	desc->chip->mask(irq);
 }
 
 static void pxa_unmask_low_gpio(unsigned int irq)
 {
-	ICMR |= 1 << (irq - PXA_IRQ(0));
+	struct irq_desc *desc = irq_to_desc(irq);
+
+	desc->chip->unmask(irq);
 }
 
 static struct irq_chip pxa_low_gpio_chip = {
@@ -120,33 +148,45 @@ static void __init pxa_init_low_gpio_irq(set_wake_t fn)
 	pxa_low_gpio_chip.set_wake = fn;
 }
 
+static inline void __iomem *irq_base(int i)
+{
+	static unsigned long phys_base[] = {
+		0x40d00000,
+		0x40d0009c,
+		0x40d00130,
+	};
+
+	return (void __iomem *)io_p2v(phys_base[i >> 5]);
+}
+
 void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
-	int irq, i;
+	int irq, i, n;
 
 	BUG_ON(irq_nr > MAX_INTERNAL_IRQS);
 
 	pxa_internal_irq_nr = irq_nr;
 
-	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
-		_ICMR(irq) = 0;	/* disable all IRQs */
-		_ICLR(irq) = 0;	/* all IRQs are IRQ, not FIQ */
-	}
-
-	/* initialize interrupt priority */
-	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
-		for (i = 0; i < irq_nr; i++)
-			IPR(i) = i | (1 << 31);
+	for (n = 0; n < irq_nr; n += 32) {
+		void __iomem *base = irq_base(n);
+
+		__raw_writel(0, base + ICMR);	/* disable all IRQs */
+		__raw_writel(0, base + ICLR);	/* all IRQs are IRQ, not FIQ */
+		for (i = n; (i < (n + 32)) && (i < irq_nr); i++) {
+			/* initialize interrupt priority */
+			if (cpu_has_ipr())
+				__raw_writel(i | IPR_VALID, IRQ_BASE + IPR(i));
+
+			irq = PXA_IRQ(i);
+			set_irq_chip(irq, &pxa_internal_irq_chip);
+			set_irq_chip_data(irq, base);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
 	}
 
 	/* only unmasked interrupts kick us out of idle */
-	ICCR = 1;
-
-	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) {
-		set_irq_chip(irq, &pxa_internal_irq_chip);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
+	__raw_writel(1, irq_base(0) + ICCR);
 
 	pxa_internal_irq_chip.set_wake = fn;
 	pxa_init_low_gpio_irq(fn);
@@ -158,16 +198,18 @@ static unsigned long saved_ipr[MAX_INTERNAL_IRQS];
 
 static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 {
-	int i, irq = PXA_IRQ(0);
+	int i;
 
-	for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
-		saved_icmr[i] = _ICMR(irq);
-		_ICMR(irq) = 0;
+	for (i = 0; i < pxa_internal_irq_nr; i += 32) {
+		void __iomem *base = irq_base(i);
+
+		saved_icmr[i] = __raw_readl(base + ICMR);
+		__raw_writel(0, base + ICMR);
 	}
 
-	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+	if (cpu_has_ipr()) {
 		for (i = 0; i < pxa_internal_irq_nr; i++)
-			saved_ipr[i] = IPR(i);
+			saved_ipr[i] = __raw_readl(IRQ_BASE + IPR(i));
 	}
 
 	return 0;
@@ -175,19 +217,20 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 
 static int pxa_irq_resume(struct sys_device *dev)
 {
-	int i, irq = PXA_IRQ(0);
+	int i;
 
-	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
-		for (i = 0; i < pxa_internal_irq_nr; i++)
-			IPR(i) = saved_ipr[i];
-	}
+	for (i = 0; i < pxa_internal_irq_nr; i += 32) {
+		void __iomem *base = irq_base(i);
 
-	for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
-		_ICMR(irq) = saved_icmr[i];
-		_ICLR(irq) = 0;
+		__raw_writel(saved_icmr[i], base + ICMR);
+		__raw_writel(0, base + ICLR);
 	}
 
-	ICCR = 1;
+	if (!cpu_is_pxa25x())
+		for (i = 0; i < pxa_internal_irq_nr; i++)
+			__raw_writel(saved_ipr[i], IRQ_BASE + IPR(i));
+
+	__raw_writel(1, IRQ_BASE + ICCR);
 	return 0;
 }
 #else
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 41aa89e3577..ccb7bfad17c 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -22,6 +22,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/smc91x.h>
 #include <linux/i2c.h>
 #include <linux/leds.h>
@@ -42,7 +43,6 @@
 #include <mach/pxa300.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
-#include <mach/pxa2xx_spi.h>
 #include <plat/pxa27x_keypad.h>
 #include <mach/littleton.h>
 #include <plat/i2c.h>
@@ -438,7 +438,7 @@ static void __init littleton_init(void)
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= LITTLETON_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 623af0232a5..8ab62a67780 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -46,6 +46,7 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -463,7 +464,7 @@ static void __init lpd270_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 	lpd270_flash_data[1].width = 4;
 
 	/*
@@ -495,7 +496,7 @@ static struct map_desc lpd270_io_desc[] __initdata = {
 
 static void __init lpd270_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
 
 	/* for use I SRAM as framebuffer.  */
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1499493cd07..3072dbea5c1 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -25,7 +25,7 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <mach/pxa2xx_spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -50,6 +50,7 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/pm.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -525,7 +526,7 @@ static void __init lubbock_init(void)
 	pxa_set_ac97_info(NULL);
 
 	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
-		(BOOT_DEF & 1) ? 2 : 4;
+		(__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 	/* Compensate for the nROMBT switch which swaps the flash banks */
 	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
 	       flashboot?"Flash":"ROM", flashboot);
@@ -549,7 +550,7 @@ static struct map_desc lubbock_io_desc[] __initdata = {
 
 static void __init lubbock_map_io(void)
 {
-	pxa_map_io();
+	pxa25x_map_io();
 	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
 
 	PCFR |= PCFR_OPDE;
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 90663760307..41198f0dc3a 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -765,7 +765,7 @@ static void __init magician_init(void)
 
 MACHINE_START(MAGICIAN, "HTC Magician")
 	.boot_params = 0xa0000100,
-	.map_io = pxa_map_io,
+	.map_io = pxa27x_map_io,
 	.nr_irqs = MAGICIAN_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.init_machine = magician_init,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a980a5c93e4..740c03590e3 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -51,6 +51,7 @@
 #include <mach/irda.h>
 #include <mach/ohci.h>
 #include <plat/pxa27x_keypad.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -565,7 +566,7 @@ static void __init mainstone_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+	mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
 	mst_flash_data[1].width = 4;
 
 	/* Compensate for SW7 which swaps the flash banks */
@@ -614,7 +615,7 @@ static struct map_desc mainstone_io_desc[] __initdata = {
 
 static void __init mainstone_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
 
  	/*	for use I SRAM as framebuffer.	*/
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index f5fb915e131..faafea3542f 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -819,7 +819,7 @@ static void mioa701_machine_exit(void)
 
 MACHINE_START(MIOA701, "MIO A701")
 	.boot_params	= 0xa0000100,
-	.map_io		= &pxa_map_io,
+	.map_io		= &pxa27x_map_io,
 	.init_irq	= &pxa27x_init_irq,
 	.init_machine	= mioa701_machine_init,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 116167aaba6..59cce78aebd 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -94,7 +94,7 @@ static void __init mp900c_init(void)
 MACHINE_START(NEC_MP900, "MobilePro900/C")
 	.boot_params	= 0xa0220100,
 	.timer		= &pxa_timer,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.init_machine	= mp900c_init,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index ce092c521e6..a6f898cbfac 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -313,7 +313,7 @@ static struct map_desc palmld_io_desc[] __initdata = {
 
 static void __init palmld_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(palmld_io_desc, ARRAY_SIZE(palmld_io_desc));
 }
 
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 862da812cd1..df4d7d009fb 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -203,7 +203,7 @@ static void __init palmt5_init(void)
 
 MACHINE_START(PALMT5, "Palm Tungsten|T5")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.reserve	= palmt5_reserve,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 2131d586091..a09a2374697 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -25,6 +25,7 @@
 #include <linux/power_supply.h>
 #include <linux/gpio_keys.h>
 #include <linux/mtd/physmap.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -116,6 +117,7 @@ static unsigned long palmtc_pin_config[] __initdata = {
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
+#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
 static struct pxamci_platform_data palmtc_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
@@ -124,9 +126,18 @@ static struct pxamci_platform_data palmtc_mci_platform_data = {
 	.detect_delay_ms	= 200,
 };
 
+static void __init palmtc_mmc_init(void)
+{
+	pxa_set_mci_info(&palmtc_mci_platform_data);
+}
+#else
+static inline void palmtc_mmc_init(void) {}
+#endif
+
 /******************************************************************************
  * GPIO keys
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button palmtc_pxa_buttons[] = {
 	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
 };
@@ -144,9 +155,18 @@ static struct platform_device palmtc_pxa_keys = {
 	},
 };
 
+static void __init palmtc_keys_init(void)
+{
+	platform_device_register(&palmtc_pxa_keys);
+}
+#else
+static inline void palmtc_keys_init(void) {}
+#endif
+
 /******************************************************************************
  * Backlight
  ******************************************************************************/
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
 static int palmtc_backlight_init(struct device *dev)
 {
 	int ret;
@@ -196,17 +216,35 @@ static struct platform_device palmtc_backlight = {
 	},
 };
 
+static void __init palmtc_pwm_init(void)
+{
+	platform_device_register(&palmtc_backlight);
+}
+#else
+static inline void palmtc_pwm_init(void) {}
+#endif
+
 /******************************************************************************
  * IrDA
  ******************************************************************************/
+#if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE)
 static struct pxaficp_platform_data palmtc_ficp_platform_data = {
 	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
+static void __init palmtc_irda_init(void)
+{
+	pxa_set_ficp_info(&palmtc_ficp_platform_data);
+}
+#else
+static inline void palmtc_irda_init(void) {}
+#endif
+
 /******************************************************************************
  * Keyboard
  ******************************************************************************/
+#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
 static const uint32_t palmtc_matrix_keys[] = {
 	KEY(0, 0, KEY_F1),
 	KEY(0, 1, KEY_X),
@@ -290,27 +328,103 @@ static struct platform_device palmtc_keyboard = {
 		.platform_data = &palmtc_keypad_platform_data,
 	},
 };
+static void __init palmtc_mkp_init(void)
+{
+	platform_device_register(&palmtc_keyboard);
+}
+#else
+static inline void palmtc_mkp_init(void) {}
+#endif
 
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+#if defined(CONFIG_USB_GADGET_PXA25X)||defined(CONFIG_USB_GADGET_PXA25X_MODULE)
+static struct gpio_vbus_mach_info palmtc_udc_info = {
 	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
 	.gpio_vbus_inverted	= 1,
 	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
 };
 
+static struct platform_device palmtc_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtc_udc_info,
+	},
+};
+
+static void __init palmtc_udc_init(void)
+{
+	platform_device_register(&palmtc_gpio_vbus);
+};
+#else
+static inline void palmtc_udc_init(void) {}
+#endif
+
 /******************************************************************************
  * Touchscreen / Battery / GPIO-extender
  ******************************************************************************/
-static struct platform_device palmtc_ucb1400_core = {
+#if	defined(CONFIG_TOUCHSCREEN_UCB1400) || \
+	defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device palmtc_ucb1400_device = {
 	.name	= "ucb1400_core",
 	.id	= -1,
 };
 
+static void __init palmtc_ts_init(void)
+{
+	pxa_set_ac97_info(NULL);
+	platform_device_register(&palmtc_ucb1400_device);
+}
+#else
+static inline void palmtc_ts_init(void) {}
+#endif
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+struct gpio_led palmtc_gpio_leds[] = {
+{
+	.name			= "palmtc:green:user",
+	.default_trigger	= "none",
+	.gpio			= GPIO_NR_PALMTC_LED_POWER,
+	.active_low		= 1,
+}, {
+	.name			= "palmtc:vibra:vibra",
+	.default_trigger	= "none",
+	.gpio			= GPIO_NR_PALMTC_VIBRA_POWER,
+	.active_low		= 1,
+}
+
+};
+
+static struct gpio_led_platform_data palmtc_gpio_led_info = {
+	.leds		= palmtc_gpio_leds,
+	.num_leds	= ARRAY_SIZE(palmtc_gpio_leds),
+};
+
+static struct platform_device palmtc_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &palmtc_gpio_led_info,
+	}
+};
+
+static void __init palmtc_leds_init(void)
+{
+	platform_device_register(&palmtc_leds);
+}
+#else
+static inline void palmtc_leds_init(void) {}
+#endif
+
 /******************************************************************************
  * NOR Flash
  ******************************************************************************/
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct resource palmtc_flash_resource = {
 	.start	= PXA_CS0_PHYS,
 	.end	= PXA_CS0_PHYS + SZ_16M - 1,
@@ -356,24 +470,33 @@ static struct platform_device palmtc_flash = {
 	},
 };
 
+static void __init palmtc_nor_init(void)
+{
+	platform_device_register(&palmtc_flash);
+}
+#else
+static inline void palmtc_nor_init(void) {}
+#endif
+
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info palmtc_lcd_modes[] = {
-{
-	.pixclock	= 115384,
-	.xres		= 320,
-	.yres		= 320,
-	.bpp		= 16,
-
-	.left_margin	= 27,
-	.right_margin	= 7,
-	.upper_margin	= 7,
-	.lower_margin	= 8,
-
-	.hsync_len	= 6,
-	.vsync_len	= 1,
-},
+	{
+		.pixclock	= 115384,
+		.xres		= 320,
+		.yres		= 320,
+		.bpp		= 16,
+
+		.left_margin	= 27,
+		.right_margin	= 7,
+		.upper_margin	= 7,
+		.lower_margin	= 8,
+
+		.hsync_len	= 6,
+		.vsync_len	= 1,
+	},
 };
 
 static struct pxafb_mach_info palmtc_lcd_screen = {
@@ -382,17 +505,17 @@ static struct pxafb_mach_info palmtc_lcd_screen = {
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
+static void __init palmtc_lcd_init(void)
+{
+	set_pxa_fb_info(&palmtc_lcd_screen);
+}
+#else
+static inline void palmtc_lcd_init(void) {}
+#endif
+
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-	&palmtc_backlight,
-	&palmtc_ucb1400_core,
-	&palmtc_keyboard,
-	&palmtc_pxa_keys,
-	&palmtc_flash,
-};
-
 static void __init palmtc_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
@@ -402,18 +525,21 @@ static void __init palmtc_init(void)
 	pxa_set_stuart_info(NULL);
 	pxa_set_hwuart_info(NULL);
 
-	set_pxa_fb_info(&palmtc_lcd_screen);
-	pxa_set_mci_info(&palmtc_mci_platform_data);
-	pxa_set_udc_info(&palmtc_udc_info);
-	pxa_set_ac97_info(NULL);
-	pxa_set_ficp_info(&palmtc_ficp_platform_data);
-
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	palmtc_mmc_init();
+	palmtc_keys_init();
+	palmtc_pwm_init();
+	palmtc_irda_init();
+	palmtc_mkp_init();
+	palmtc_udc_init();
+	palmtc_ts_init();
+	palmtc_nor_init();
+	palmtc_lcd_init();
+	palmtc_leds_init();
 };
 
 MACHINE_START(PALMTC, "Palm Tungsten|C")
 	.boot_params 	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmtc_init
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index a9dae7bc35d..3f25014a136 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -374,7 +374,7 @@ static void __init palmte2_init(void)
 
 MACHINE_START(PALMTE2, "Palm Tungsten|E2")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmte2_init
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 00e2d7ba84e..8aadad55fbe 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -442,7 +442,7 @@ static void __init centro_init(void)
 
 MACHINE_START(TREO680, "Palm Treo 680")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
@@ -451,7 +451,7 @@ MACHINE_END
 
 MACHINE_START(CENTRO, "Palm Centro 685")
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa27x_map_io,
 	.reserve	= treo_reserve,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index d2060a1d1d6..595f002066c 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {}
 /******************************************************************************
  * NAND Flash
  ******************************************************************************/
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+	defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
 				 unsigned int ctrl)
 {
@@ -333,7 +334,7 @@ static struct map_desc palmtx_io_desc[] __initdata = {
 
 static void __init palmtx_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
 }
 
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index af6203fbca9..7bf4017326e 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -280,7 +280,7 @@ static void __init palmz72_init(void)
 
 MACHINE_START(PALMZ72, "Palm Zire72")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= palmz72_init
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index c77e8f30a43..1fc8a66407a 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -25,12 +25,12 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/max7301.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/leds.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/pxa27x.h>
-#include <mach/pxa2xx_spi.h>
 #include <mach/pcm027.h>
 #include "generic.h"
 
@@ -244,7 +244,7 @@ static void __init pcm027_init(void)
 
 static void __init pcm027_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 
 	/* initialize sleep mode regs (wake-up sources, etc) */
 	PGSR0 = 0x01308000;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 93a191c889d..4f0ff1ab623 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -25,6 +25,7 @@
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/mtd/sharpsl.h>
 
 #include <mach/hardware.h>
@@ -43,7 +44,6 @@
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
-#include <mach/pxa2xx_spi.h>
 #include <plat/i2c.h>
 
 #include <asm/hardware/scoop.h>
@@ -466,7 +466,7 @@ static void __init fixup_poodle(struct machine_desc *desc,
 
 MACHINE_START(POODLE, "SHARP Poodle")
 	.fixup		= fixup_poodle,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.nr_irqs	= POODLE_NR_IRQS,	/* 4 for LoCoMo */
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index de53f2e4aa3..3f5241c8489 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,6 +23,7 @@
 #include <linux/suspend.h>
 #include <linux/sysdev.h>
 
+#include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
@@ -30,6 +31,7 @@
 #include <mach/reset.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -90,23 +92,21 @@ unsigned int pxa25x_get_clk_frequency_khz(int info)
 	return (turbo & 1) ? (N/1000) : (M/1000);
 }
 
-/*
- * Return the current memory clock frequency in units of 10kHz
- */
-unsigned int pxa25x_get_memclk_frequency_10khz(void)
+static unsigned long clk_pxa25x_mem_getrate(struct clk *clk)
 {
-	return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK / 10000;
+	return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK;
 }
 
-static unsigned long clk_pxa25x_lcd_getrate(struct clk *clk)
-{
-	return pxa25x_get_memclk_frequency_10khz() * 10000;
-}
+static const struct clkops clk_pxa25x_mem_ops = {
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable,
+	.getrate	= clk_pxa25x_mem_getrate,
+};
 
 static const struct clkops clk_pxa25x_lcd_ops = {
-	.enable		= clk_cken_enable,
-	.disable	= clk_cken_disable,
-	.getrate	= clk_pxa25x_lcd_getrate,
+	.enable		= clk_pxa2xx_cken_enable,
+	.disable	= clk_pxa2xx_cken_disable,
+	.getrate	= clk_pxa25x_mem_getrate,
 };
 
 static unsigned long gpio12_config_32k[] = {
@@ -160,31 +160,30 @@ static const struct clkops clk_pxa25x_gpio11_ops = {
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
  * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
  */
-static DEFINE_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
-
-static struct clk_lookup pxa25x_hwuart_clkreg =
-	INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
 
 /*
  * PXA 2xx clock declarations.
  */
+static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1);
+static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5);
+static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0);
+static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0);
+
 static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
-static DEFINE_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_stuart, STUART, 14745600, 1);
-static DEFINE_CKEN(pxa25x_usb, USB, 47923000, 5);
 static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
 static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
-static DEFINE_CKEN(pxa25x_mmc, MMC, 19169000, 0);
-static DEFINE_CKEN(pxa25x_i2c, I2C, 31949000, 0);
-static DEFINE_CKEN(pxa25x_ssp, SSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_assp, ASSP, 3686400, 0);
-static DEFINE_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
-static DEFINE_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
-static DEFINE_CKEN(pxa25x_ac97, AC97, 24576000, 0);
-static DEFINE_CKEN(pxa25x_i2s, I2S, 14745600, 0);
-static DEFINE_CKEN(pxa25x_ficp, FICP, 47923000, 0);
+static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0);
 
 static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
@@ -205,8 +204,12 @@ static struct clk_lookup pxa25x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
 	INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
+	INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
 };
 
+static struct clk_lookup pxa25x_hwuart_clkreg =
+	INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
+
 #ifdef CONFIG_PM
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
@@ -219,20 +222,17 @@ static struct clk_lookup pxa25x_clkregs[] = {
  */
 enum {
 	SLEEP_SAVE_PSTR,
-	SLEEP_SAVE_CKEN,
 	SLEEP_SAVE_COUNT
 };
 
 
 static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(CKEN);
 	SAVE(PSTR);
 }
 
 static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	RESTORE(CKEN);
 	RESTORE(PSTR);
 }
 
@@ -320,6 +320,22 @@ void __init pxa26x_init_irq(void)
 }
 #endif
 
+static struct map_desc pxa25x_io_desc[] __initdata = {
+	{	/* Mem Ctl */
+		.virtual	= SMEMC_VIRT,
+		.pfn		= __phys_to_pfn(PXA2XX_SMEMC_BASE),
+		.length		= 0x00200000,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init pxa25x_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(ARRAY_AND_SIZE(pxa25x_io_desc));
+	pxa25x_get_clk_frequency_khz(1);
+}
+
 static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_udc,
 	&pxa_device_pmu,
@@ -339,7 +355,9 @@ static struct sys_device pxa25x_sysdev[] = {
 		.cls	= &pxa2xx_mfp_sysclass,
 	}, {
 		.cls	= &pxa_gpio_sysclass,
-	},
+	}, {
+		.cls	= &pxa2xx_clock_sysclass,
+	}
 };
 
 static int __init pxa25x_init(void)
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d1fbf29d561..b2130b7a7b5 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -17,7 +17,9 @@
 #include <linux/suspend.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
+#include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/irqs.h>
@@ -27,6 +29,8 @@
 #include <mach/ohci.h>
 #include <mach/pm.h>
 #include <mach/dma.h>
+#include <mach/smemc.h>
+
 #include <plat/i2c.h>
 
 #include "generic.h"
@@ -107,10 +111,9 @@ unsigned int pxa27x_get_clk_frequency_khz(int info)
 }
 
 /*
- * Return the current mem clock frequency in units of 10kHz as
- * reflected by CCCR[A], B, and L
+ * Return the current mem clock frequency as reflected by CCCR[A], B, and L
  */
-unsigned int pxa27x_get_memclk_frequency_10khz(void)
+static unsigned long clk_pxa27x_mem_getrate(struct clk *clk)
 {
 	unsigned long ccsr, clkcfg;
 	unsigned int l, L, m, M;
@@ -129,9 +132,15 @@ unsigned int pxa27x_get_memclk_frequency_10khz(void)
 	L = l * BASE_CLK;
 	M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
 
-	return (M / 10000);
+	return M;
 }
 
+static const struct clkops clk_pxa27x_mem_ops = {
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable,
+	.getrate	= clk_pxa27x_mem_getrate,
+};
+
 /*
  * Return the current LCD clock frequency in units of 10kHz as
  */
@@ -157,36 +166,38 @@ static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
 }
 
 static const struct clkops clk_pxa27x_lcd_ops = {
-	.enable		= clk_cken_enable,
-	.disable	= clk_cken_disable,
+	.enable		= clk_pxa2xx_cken_enable,
+	.disable	= clk_pxa2xx_cken_disable,
 	.getrate	= clk_pxa27x_lcd_getrate,
 };
 
+static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1);
+static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5);
+static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
+static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0);
+static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0);
+
 static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
 static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
-static DEFINE_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_stuart, STUART, 14857000, 1);
-static DEFINE_CKEN(pxa27x_i2s, I2S, 14682000, 0);
-static DEFINE_CKEN(pxa27x_i2c, I2C, 32842000, 0);
-static DEFINE_CKEN(pxa27x_usb, USB, 48000000, 5);
-static DEFINE_CKEN(pxa27x_mmc, MMC, 19500000, 0);
-static DEFINE_CKEN(pxa27x_ficp, FICP, 48000000, 0);
-static DEFINE_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
-static DEFINE_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
-static DEFINE_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
-static DEFINE_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
-static DEFINE_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
-static DEFINE_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
-static DEFINE_CKEN(pxa27x_ac97, AC97, 24576000, 0);
-static DEFINE_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
-static DEFINE_CKEN(pxa27x_msl, MSL, 48000000, 0);
-static DEFINE_CKEN(pxa27x_usim, USIM, 48000000, 0);
-static DEFINE_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
-static DEFINE_CKEN(pxa27x_im, IM, 0, 0);
-static DEFINE_CKEN(pxa27x_memc, MEMC, 0, 0);
+static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0);
 
 static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
@@ -215,6 +226,7 @@ static struct clk_lookup pxa27x_clkregs[] = {
 	INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
 	INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
 	INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
+	INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -246,7 +258,6 @@ int __init pxa27x_set_pwrmode(unsigned int mode)
  */
 enum {
 	SLEEP_SAVE_PSTR,
-	SLEEP_SAVE_CKEN,
 	SLEEP_SAVE_MDREFR,
 	SLEEP_SAVE_PCFR,
 	SLEEP_SAVE_COUNT
@@ -254,21 +265,19 @@ enum {
 
 void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(MDREFR);
+	sleep_save[SLEEP_SAVE_MDREFR] = __raw_readl(MDREFR);
 	SAVE(PCFR);
 
-	SAVE(CKEN);
 	SAVE(PSTR);
 }
 
 void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	RESTORE(MDREFR);
+	__raw_writel(sleep_save[SLEEP_SAVE_MDREFR], MDREFR);
 	RESTORE(PCFR);
 
 	PSSR = PSSR_RDH | PSSR_PH;
 
-	RESTORE(CKEN);
 	RESTORE(PSTR);
 }
 
@@ -370,6 +379,27 @@ void __init pxa27x_init_irq(void)
 	pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
 }
 
+static struct map_desc pxa27x_io_desc[] __initdata = {
+	{	/* Mem Ctl */
+		.virtual	= SMEMC_VIRT,
+		.pfn		= __phys_to_pfn(PXA2XX_SMEMC_BASE),
+		.length		= 0x00200000,
+		.type		= MT_DEVICE
+	}, {	/* IMem ctl */
+		.virtual	=  0xfe000000,
+		.pfn		= __phys_to_pfn(0x58000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init pxa27x_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(ARRAY_AND_SIZE(pxa27x_io_desc));
+	pxa27x_get_clk_frequency_khz(1);
+}
+
 /*
  * device registration specific to PXA27x.
  */
@@ -405,7 +435,9 @@ static struct sys_device pxa27x_sysdev[] = {
 		.cls	= &pxa2xx_mfp_sysclass,
 	}, {
 		.cls	= &pxa_gpio_sysclass,
-	},
+	}, {
+		.cls	= &pxa2xx_clock_sysclass,
+	}
 };
 
 static int __init pxa27x_init(void)
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index d1c747cdacf..e14818f5d95 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
+#include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <mach/gpio.h>
 #include <mach/pxa3xx-regs.h>
@@ -30,193 +31,16 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/regs-intc.h>
+#include <mach/smemc.h>
 #include <plat/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
 #include "clock.h"
 
-/* Crystal clock: 13MHz */
-#define BASE_CLK	13000000
-
-/* Ring Oscillator Clock: 60MHz */
-#define RO_CLK		60000000
-
-#define ACCR_D0CS	(1 << 26)
-#define ACCR_PCCE	(1 << 11)
-
 #define PECR_IE(n)	((1 << ((n) * 2)) << 28)
 #define PECR_IS(n)	((1 << ((n) * 2)) << 29)
 
-/* crystal frequency to static memory controller multiplier (SMCFS) */
-static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
-
-/* crystal frequency to HSIO bus frequency multiplier (HSS) */
-static unsigned char hss_mult[4] = { 8, 12, 16, 24 };
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa3xx_get_clk_frequency_khz(int info)
-{
-	unsigned long acsr, xclkcfg;
-	unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS;
-
-	/* Read XCLKCFG register turbo bit */
-	__asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg));
-	t = xclkcfg & 0x1;
-
-	acsr = ACSR;
-
-	xl  = acsr & 0x1f;
-	xn  = (acsr >> 8) & 0x7;
-	hss = (acsr >> 14) & 0x3;
-
-	XL = xl * BASE_CLK;
-	XN = xn * XL;
-
-	ro = acsr & ACCR_D0CS;
-
-	CLK = (ro) ? RO_CLK : ((t) ? XN : XL);
-	HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
-	if (info) {
-		pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n",
-			RO_CLK / 1000000, (RO_CLK % 1000000) / 10000,
-			(ro) ? "" : "in");
-		pr_info("Run Mode clock: %d.%02dMHz (*%d)\n",
-			XL / 1000000, (XL % 1000000) / 10000, xl);
-		pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n",
-			XN / 1000000, (XN % 1000000) / 10000, xn,
-			(t) ? "" : "in");
-		pr_info("HSIO bus clock: %d.%02dMHz\n",
-			HSS / 1000000, (HSS % 1000000) / 10000);
-	}
-
-	return CLK / 1000;
-}
-
-void pxa3xx_clear_reset_status(unsigned int mask)
-{
-	/* RESET_STATUS_* has a 1:1 mapping with ARSR */
-	ARSR = mask;
-}
-
-/*
- * Return the current AC97 clock frequency.
- */
-static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
-{
-	unsigned long rate = 312000000;
-	unsigned long ac97_div;
-
-	ac97_div = AC97_DIV;
-
-	/* This may loose precision for some rates but won't for the
-	 * standard 24.576MHz.
-	 */
-	rate /= (ac97_div >> 12) & 0x7fff;
-	rate *= (ac97_div & 0xfff);
-
-	return rate;
-}
-
-/*
- * Return the current HSIO bus clock frequency
- */
-static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
-{
-	unsigned long acsr;
-	unsigned int hss, hsio_clk;
-
-	acsr = ACSR;
-
-	hss = (acsr >> 14) & 0x3;
-	hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK;
-
-	return hsio_clk;
-}
-
-void clk_pxa3xx_cken_enable(struct clk *clk)
-{
-	unsigned long mask = 1ul << (clk->cken & 0x1f);
-
-	if (clk->cken < 32)
-		CKENA |= mask;
-	else
-		CKENB |= mask;
-}
-
-void clk_pxa3xx_cken_disable(struct clk *clk)
-{
-	unsigned long mask = 1ul << (clk->cken & 0x1f);
-
-	if (clk->cken < 32)
-		CKENA &= ~mask;
-	else
-		CKENB &= ~mask;
-}
-
-const struct clkops clk_pxa3xx_cken_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-};
-
-static const struct clkops clk_pxa3xx_hsio_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_hsio_getrate,
-};
-
-static const struct clkops clk_pxa3xx_ac97_ops = {
-	.enable		= clk_pxa3xx_cken_enable,
-	.disable	= clk_pxa3xx_cken_disable,
-	.getrate	= clk_pxa3xx_ac97_getrate,
-};
-
-static void clk_pout_enable(struct clk *clk)
-{
-	OSCC |= OSCC_PEN;
-}
-
-static void clk_pout_disable(struct clk *clk)
-{
-	OSCC &= ~OSCC_PEN;
-}
-
-static const struct clkops clk_pout_ops = {
-	.enable		= clk_pout_enable,
-	.disable	= clk_pout_disable,
-};
-
-static void clk_dummy_enable(struct clk *clk)
-{
-}
-
-static void clk_dummy_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_dummy_ops = {
-	.enable		= clk_dummy_enable,
-	.disable	= clk_dummy_disable,
-};
-
-static struct clk clk_pxa3xx_pout = {
-	.ops		= &clk_pout_ops,
-	.rate		= 13000000,
-	.delay		= 70,
-};
-
-static struct clk clk_dummy = {
-	.ops		= &clk_dummy_ops,
-};
-
-static DEFINE_PXA3_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_PXA3_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
-static DEFINE_PXA3_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
 static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
 static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
 static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
@@ -234,6 +58,12 @@ static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
 
+static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
+static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
+static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
+static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
+
 static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
 	/* Power I2C clock is always on */
@@ -258,6 +88,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
 	INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
+	INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
 };
 
 #ifdef CONFIG_PM
@@ -268,30 +99,6 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 static void __iomem *sram;
 static unsigned long wakeup_src;
 
-#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
-
-enum {	SLEEP_SAVE_CKENA,
-	SLEEP_SAVE_CKENB,
-	SLEEP_SAVE_ACCR,
-
-	SLEEP_SAVE_COUNT,
-};
-
-static void pxa3xx_cpu_pm_save(unsigned long *sleep_save)
-{
-	SAVE(CKENA);
-	SAVE(CKENB);
-	SAVE(ACCR);
-}
-
-static void pxa3xx_cpu_pm_restore(unsigned long *sleep_save)
-{
-	RESTORE(ACCR);
-	RESTORE(CKENA);
-	RESTORE(CKENB);
-}
-
 /*
  * Enter a standby mode (S0D1C2 or S0D2C2).  Upon wakeup, the dynamic
  * memory controller has to be reinitialised, so we place some code
@@ -390,9 +197,6 @@ static int pxa3xx_cpu_pm_valid(suspend_state_t state)
 }
 
 static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
-	.save_count	= SLEEP_SAVE_COUNT,
-	.save		= pxa3xx_cpu_pm_save,
-	.restore	= pxa3xx_cpu_pm_restore,
 	.valid		= pxa3xx_cpu_pm_valid,
 	.enter		= pxa3xx_cpu_pm_enter,
 };
@@ -580,6 +384,22 @@ void __init pxa3xx_init_irq(void)
 	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
 }
 
+static struct map_desc pxa3xx_io_desc[] __initdata = {
+	{	/* Mem Ctl */
+		.virtual	= SMEMC_VIRT,
+		.pfn		= __phys_to_pfn(PXA3XX_SMEMC_BASE),
+		.length		= 0x00200000,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init pxa3xx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
+	pxa3xx_get_clk_frequency_khz(1);
+}
+
 /*
  * device registration specific to PXA3xx.
  */
@@ -615,7 +435,9 @@ static struct sys_device pxa3xx_sysdev[] = {
 		.cls	= &pxa3xx_mfp_sysclass,
 	}, {
 		.cls	= &pxa_gpio_sysclass,
-	},
+	}, {
+		.cls	= &pxa3xx_clock_sysclass,
+	}
 };
 
 static int __init pxa3xx_init(void)
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 7d29dd3af79..8aeacf90878 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -192,7 +192,7 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
 
 static int __init pxa930_init(void)
 {
-	if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
+	if (cpu_is_pxa93x()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa930_mfp_addr_map);
 	}
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
new file mode 100644
index 00000000000..437980f7271
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -0,0 +1,308 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa95x.c
+ *
+ * code specific to PXA95x aka MGx
+ *
+ * Copyright (C) 2009-2010 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/pxa930.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/regs-intc.h>
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
+
+static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
+
+	MFP_ADDR(GPIO0, 0x02e0),
+	MFP_ADDR(GPIO1, 0x02dc),
+	MFP_ADDR(GPIO2, 0x02e8),
+	MFP_ADDR(GPIO3, 0x02d8),
+	MFP_ADDR(GPIO4, 0x02e4),
+	MFP_ADDR(GPIO5, 0x02ec),
+	MFP_ADDR(GPIO6, 0x02f8),
+	MFP_ADDR(GPIO7, 0x02fc),
+	MFP_ADDR(GPIO8, 0x0300),
+	MFP_ADDR(GPIO9, 0x02d4),
+	MFP_ADDR(GPIO10, 0x02f4),
+	MFP_ADDR(GPIO11, 0x02f0),
+	MFP_ADDR(GPIO12, 0x0304),
+	MFP_ADDR(GPIO13, 0x0310),
+	MFP_ADDR(GPIO14, 0x0308),
+	MFP_ADDR(GPIO15, 0x030c),
+	MFP_ADDR(GPIO16, 0x04e8),
+	MFP_ADDR(GPIO17, 0x04f4),
+	MFP_ADDR(GPIO18, 0x04f8),
+	MFP_ADDR(GPIO19, 0x04fc),
+	MFP_ADDR(GPIO20, 0x0518),
+	MFP_ADDR(GPIO21, 0x051c),
+	MFP_ADDR(GPIO22, 0x04ec),
+	MFP_ADDR(GPIO23, 0x0500),
+	MFP_ADDR(GPIO24, 0x04f0),
+	MFP_ADDR(GPIO25, 0x0504),
+	MFP_ADDR(GPIO26, 0x0510),
+	MFP_ADDR(GPIO27, 0x0514),
+	MFP_ADDR(GPIO28, 0x0520),
+	MFP_ADDR(GPIO29, 0x0600),
+	MFP_ADDR(GPIO30, 0x0618),
+	MFP_ADDR(GPIO31, 0x0610),
+	MFP_ADDR(GPIO32, 0x060c),
+	MFP_ADDR(GPIO33, 0x061c),
+	MFP_ADDR(GPIO34, 0x0620),
+	MFP_ADDR(GPIO35, 0x0628),
+	MFP_ADDR(GPIO36, 0x062c),
+	MFP_ADDR(GPIO37, 0x0630),
+	MFP_ADDR(GPIO38, 0x0634),
+	MFP_ADDR(GPIO39, 0x0638),
+	MFP_ADDR(GPIO40, 0x063c),
+	MFP_ADDR(GPIO41, 0x0614),
+	MFP_ADDR(GPIO42, 0x0624),
+	MFP_ADDR(GPIO43, 0x0608),
+	MFP_ADDR(GPIO44, 0x0604),
+	MFP_ADDR(GPIO45, 0x050c),
+	MFP_ADDR(GPIO46, 0x0508),
+	MFP_ADDR(GPIO47, 0x02bc),
+	MFP_ADDR(GPIO48, 0x02b4),
+	MFP_ADDR(GPIO49, 0x02b8),
+	MFP_ADDR(GPIO50, 0x02c8),
+	MFP_ADDR(GPIO51, 0x02c0),
+	MFP_ADDR(GPIO52, 0x02c4),
+	MFP_ADDR(GPIO53, 0x02d0),
+	MFP_ADDR(GPIO54, 0x02cc),
+	MFP_ADDR(GPIO55, 0x029c),
+	MFP_ADDR(GPIO56, 0x02a0),
+	MFP_ADDR(GPIO57, 0x0294),
+	MFP_ADDR(GPIO58, 0x0298),
+	MFP_ADDR(GPIO59, 0x02a4),
+	MFP_ADDR(GPIO60, 0x02a8),
+	MFP_ADDR(GPIO61, 0x02b0),
+	MFP_ADDR(GPIO62, 0x02ac),
+	MFP_ADDR(GPIO63, 0x0640),
+	MFP_ADDR(GPIO64, 0x065c),
+	MFP_ADDR(GPIO65, 0x0648),
+	MFP_ADDR(GPIO66, 0x0644),
+	MFP_ADDR(GPIO67, 0x0674),
+	MFP_ADDR(GPIO68, 0x0658),
+	MFP_ADDR(GPIO69, 0x0654),
+	MFP_ADDR(GPIO70, 0x0660),
+	MFP_ADDR(GPIO71, 0x0668),
+	MFP_ADDR(GPIO72, 0x0664),
+	MFP_ADDR(GPIO73, 0x0650),
+	MFP_ADDR(GPIO74, 0x066c),
+	MFP_ADDR(GPIO75, 0x064c),
+	MFP_ADDR(GPIO76, 0x0670),
+	MFP_ADDR(GPIO77, 0x0678),
+	MFP_ADDR(GPIO78, 0x067c),
+	MFP_ADDR(GPIO79, 0x0694),
+	MFP_ADDR(GPIO80, 0x069c),
+	MFP_ADDR(GPIO81, 0x06a0),
+	MFP_ADDR(GPIO82, 0x06a4),
+	MFP_ADDR(GPIO83, 0x0698),
+	MFP_ADDR(GPIO84, 0x06bc),
+	MFP_ADDR(GPIO85, 0x06b4),
+	MFP_ADDR(GPIO86, 0x06b0),
+	MFP_ADDR(GPIO87, 0x06c0),
+	MFP_ADDR(GPIO88, 0x06c4),
+	MFP_ADDR(GPIO89, 0x06ac),
+	MFP_ADDR(GPIO90, 0x0680),
+	MFP_ADDR(GPIO91, 0x0684),
+	MFP_ADDR(GPIO92, 0x0688),
+	MFP_ADDR(GPIO93, 0x0690),
+	MFP_ADDR(GPIO94, 0x068c),
+	MFP_ADDR(GPIO95, 0x06a8),
+	MFP_ADDR(GPIO96, 0x06b8),
+	MFP_ADDR(GPIO97, 0x0410),
+	MFP_ADDR(GPIO98, 0x0418),
+	MFP_ADDR(GPIO99, 0x041c),
+	MFP_ADDR(GPIO100, 0x0414),
+	MFP_ADDR(GPIO101, 0x0408),
+	MFP_ADDR(GPIO102, 0x0324),
+	MFP_ADDR(GPIO103, 0x040c),
+	MFP_ADDR(GPIO104, 0x0400),
+	MFP_ADDR(GPIO105, 0x0328),
+	MFP_ADDR(GPIO106, 0x0404),
+
+	MFP_ADDR(GPIO159, 0x0524),
+	MFP_ADDR(GPIO163, 0x0534),
+	MFP_ADDR(GPIO167, 0x0544),
+	MFP_ADDR(GPIO168, 0x0548),
+	MFP_ADDR(GPIO169, 0x054c),
+	MFP_ADDR(GPIO170, 0x0550),
+	MFP_ADDR(GPIO171, 0x0554),
+	MFP_ADDR(GPIO172, 0x0558),
+	MFP_ADDR(GPIO173, 0x055c),
+
+	MFP_ADDR(nXCVREN, 0x0204),
+	MFP_ADDR(DF_CLE_nOE, 0x020c),
+	MFP_ADDR(DF_nADV1_ALE, 0x0218),
+	MFP_ADDR(DF_SCLK_E, 0x0214),
+	MFP_ADDR(DF_SCLK_S, 0x0210),
+	MFP_ADDR(nBE0, 0x021c),
+	MFP_ADDR(nBE1, 0x0220),
+	MFP_ADDR(DF_nADV2_ALE, 0x0224),
+	MFP_ADDR(DF_INT_RnB, 0x0228),
+	MFP_ADDR(DF_nCS0, 0x022c),
+	MFP_ADDR(DF_nCS1, 0x0230),
+	MFP_ADDR(nLUA, 0x0254),
+	MFP_ADDR(nLLA, 0x0258),
+	MFP_ADDR(DF_nWE, 0x0234),
+	MFP_ADDR(DF_nRE_nOE, 0x0238),
+	MFP_ADDR(DF_ADDR0, 0x024c),
+	MFP_ADDR(DF_ADDR1, 0x0250),
+	MFP_ADDR(DF_ADDR2, 0x025c),
+	MFP_ADDR(DF_ADDR3, 0x0260),
+	MFP_ADDR(DF_IO0, 0x023c),
+	MFP_ADDR(DF_IO1, 0x0240),
+	MFP_ADDR(DF_IO2, 0x0244),
+	MFP_ADDR(DF_IO3, 0x0248),
+	MFP_ADDR(DF_IO4, 0x0264),
+	MFP_ADDR(DF_IO5, 0x0268),
+	MFP_ADDR(DF_IO6, 0x026c),
+	MFP_ADDR(DF_IO7, 0x0270),
+	MFP_ADDR(DF_IO8, 0x0274),
+	MFP_ADDR(DF_IO9, 0x0278),
+	MFP_ADDR(DF_IO10, 0x027c),
+	MFP_ADDR(DF_IO11, 0x0280),
+	MFP_ADDR(DF_IO12, 0x0284),
+	MFP_ADDR(DF_IO13, 0x0288),
+	MFP_ADDR(DF_IO14, 0x028c),
+	MFP_ADDR(DF_IO15, 0x0290),
+
+	MFP_ADDR(GSIM_UIO, 0x0314),
+	MFP_ADDR(GSIM_UCLK, 0x0318),
+	MFP_ADDR(GSIM_UDET, 0x031c),
+	MFP_ADDR(GSIM_nURST, 0x0320),
+
+	MFP_ADDR(PMIC_INT, 0x06c8),
+
+	MFP_ADDR(RDY, 0x0200),
+
+	MFP_ADDR_END,
+};
+
+static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
+static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
+static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
+static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
+
+static struct clk_lookup pxa95x_clkregs[] = {
+	INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
+	/* Power I2C clock is always on */
+	INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
+	INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
+	INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
+	INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
+	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
+	INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
+	INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
+	INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
+	INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
+	INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
+	INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
+	INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
+	INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
+	INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
+};
+
+void __init pxa95x_init_irq(void)
+{
+	pxa_init_irq(96, NULL);
+	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
+}
+
+/*
+ * device registration specific to PXA93x.
+ */
+
+void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_i2c_power, info);
+}
+
+static struct platform_device *devices[] __initdata = {
+	&sa1100_device_rtc,
+	&pxa_device_rtc,
+	&pxa27x_device_ssp1,
+	&pxa27x_device_ssp2,
+	&pxa27x_device_ssp3,
+	&pxa3xx_device_ssp4,
+	&pxa27x_device_pwm0,
+	&pxa27x_device_pwm1,
+};
+
+static struct sys_device pxa95x_sysdev[] = {
+	{
+		.cls	= &pxa_irq_sysclass,
+	}, {
+		.cls	= &pxa_gpio_sysclass,
+	}, {
+		.cls	= &pxa3xx_clock_sysclass,
+	}
+};
+
+static int __init pxa95x_init(void)
+{
+	int ret = 0, i;
+
+	if (cpu_is_pxa95x()) {
+		mfp_init_base(io_p2v(MFPR_BASE));
+		mfp_init_addr(pxa95x_mfp_addr_map);
+
+		reset_status = ARSR;
+
+		/*
+		 * clear RDH bit every time after reset
+		 *
+		 * Note: the last 3 bits DxS are write-1-to-clear so carefully
+		 * preserve them here in case they will be referenced later
+		 */
+		ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
+
+		clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
+
+		if ((ret = pxa_init_dma(IRQ_DMA, 32)))
+			return ret;
+
+		for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) {
+			ret = sysdev_register(&pxa95x_sysdev[i]);
+			if (ret)
+				pr_err("failed to register sysdev[%d]\n", i);
+		}
+
+		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+	}
+
+	return ret;
+}
+
+postcore_initcall(pxa95x_init);
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 4121d03ea2c..8361151be05 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -588,6 +588,9 @@ static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
 	.num_modes	= 1,
 	.video_mem_size = 0x400000,
 	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+#ifdef CONFIG_PXA3XX_GCU
+	.acceleration_enabled = 1,
+#endif
 };
 
 static void __init raumfeld_lcd_init(void)
@@ -616,6 +619,8 @@ static void __init raumfeld_lcd_init(void)
 		pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
 	else
 		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
+
+	platform_device_register(&pxa3xx_device_gcu);
 }
 
 /**
@@ -1085,7 +1090,7 @@ static void __init raumfeld_speaker_init(void)
 MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_controller_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -1095,7 +1100,7 @@ MACHINE_END
 MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_connector_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
@@ -1105,7 +1110,7 @@ MACHINE_END
 MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
 	.boot_params	= RAUMFELD_SDRAM_BASE + 0x100,
 	.init_machine	= raumfeld_speaker_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 4b521e045d7..c1ca8cb467f 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -116,7 +116,7 @@ static struct platform_device smc91x_device = {
 	},
 };
 
-#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static uint16_t lcd_power_on[] = {
 	/* single frame */
 	SMART_CMD_NOOP,
@@ -597,7 +597,7 @@ static void __init saar_init(void)
 MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = saar_init,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
new file mode 100644
index 00000000000..e497922f761
--- /dev/null
+++ b/arch/arm/mach-pxa/saarb.c
@@ -0,0 +1,114 @@
+/*
+ *  linux/arch/arm/mach-pxa/saarb.c
+ *
+ *  Support for the Marvell Handheld Platform (aka SAARB)
+ *
+ *  Copyright (C) 2007-2010 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/mfd/88pm860x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa930.h>
+#include <mach/gpio.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+
+#define SAARB_NR_IRQS	(IRQ_BOARD_START + 40)
+
+static struct pm860x_touch_pdata saarb_touch = {
+	.gpadc_prebias	= 1,
+	.slot_cycle	= 1,
+	.tsi_prebias	= 6,
+	.pen_prebias	= 16,
+	.pen_prechg	= 2,
+	.res_x		= 300,
+};
+
+static struct pm860x_backlight_pdata saarb_backlight[] = {
+	{
+		.id	= PM8606_ID_BACKLIGHT,
+		.iset	= PM8606_WLED_CURRENT(24),
+		.flags	= PM8606_BACKLIGHT1,
+	},
+	{},
+};
+
+static struct pm860x_led_pdata saarb_led[] = {
+	{
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_RED,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_GREEN,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED1_BLUE,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_RED,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_GREEN,
+	}, {
+		.id	= PM8606_ID_LED,
+		.iset	= PM8606_LED_CURRENT(12),
+		.flags	= PM8606_LED2_BLUE,
+	},
+};
+
+static struct pm860x_platform_data saarb_pm8607_info = {
+	.touch		= &saarb_touch,
+	.backlight	= &saarb_backlight[0],
+	.led		= &saarb_led[0],
+	.companion_addr	= 0x10,
+	.irq_mode	= 0,
+	.irq_base	= IRQ_BOARD_START,
+
+	.i2c_port	= GI2C_PORT,
+};
+
+static struct i2c_board_info saarb_i2c_info[] = {
+	{
+		.type		= "88PM860x",
+		.addr		= 0x34,
+		.platform_data	= &saarb_pm8607_info,
+		.irq		= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+	},
+};
+
+static void __init saarb_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info));
+}
+
+MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.nr_irqs	= SAARB_NR_IRQS,
+	.init_irq       = pxa95x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = saarb_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 8fed027b12d..e68d46d415f 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -579,7 +579,8 @@ static int sharpsl_ac_check(void)
 static int sharpsl_pm_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	sharpsl_pm.flags |= SHARPSL_SUSPENDED;
-	flush_scheduled_work();
+	flush_delayed_work_sync(&toggle_charger);
+	flush_delayed_work_sync(&sharpsl_bat);
 
 	if (sharpsl_pm.charge_mode == CHRG_ON)
 		sharpsl_pm.flags |= SHARPSL_DO_OFFLINE_CHRG;
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 52c30b01a67..c551da86baf 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
-
+#include <mach/smemc.h>
 #include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
@@ -353,8 +353,8 @@ resume_turn_on_mmu:
 
 	@ Let us ensure we jump to resume_after_mmu only when the mcr above
 	@ actually took effect.  They call it the "cpwait" operation.
-	mrc	p15, 0, r1, c2, c0, 0		@ queue a dependency on CP15
-	sub	pc, r2, r1, lsr #32		@ jump to virtual addr
+	mrc	p15, 0, r0, c2, c0, 0		@ queue a dependency on CP15
+	sub	pc, r2, r0, lsr #32		@ jump to virtual addr
 	nop
 	nop
 	nop
diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c
index d6f6904132a..232b7316ec0 100644
--- a/arch/arm/mach-pxa/smemc.c
+++ b/arch/arm/mach-pxa/smemc.c
@@ -9,50 +9,37 @@
 #include <linux/sysdev.h>
 
 #include <mach/hardware.h>
-
-#define SMEMC_PHYS_BASE	(0x4A000000)
-#define SMEMC_PHYS_SIZE	(0x90)
-
-#define MSC0		(0x08)	/* Static Memory Controller Register 0 */
-#define MSC1		(0x0C)	/* Static Memory Controller Register 1 */
-#define SXCNFG		(0x1C)	/* Synchronous Static Memory Control Register */
-#define MEMCLKCFG	(0x68)	/* Clock Configuration */
-#define CSADRCFG0	(0x80)	/* Address Configuration Register for CS0 */
-#define CSADRCFG1	(0x84)	/* Address Configuration Register for CS1 */
-#define CSADRCFG2	(0x88)	/* Address Configuration Register for CS2 */
-#define CSADRCFG3	(0x8C)	/* Address Configuration Register for CS3 */
+#include <mach/smemc.h>
 
 #ifdef CONFIG_PM
-static void __iomem *smemc_mmio_base;
-
 static unsigned long msc[2];
 static unsigned long sxcnfg, memclkcfg;
 static unsigned long csadrcfg[4];
 
 static int pxa3xx_smemc_suspend(struct sys_device *dev, pm_message_t state)
 {
-	msc[0] = __raw_readl(smemc_mmio_base + MSC0);
-	msc[1] = __raw_readl(smemc_mmio_base + MSC1);
-	sxcnfg = __raw_readl(smemc_mmio_base + SXCNFG);
-	memclkcfg = __raw_readl(smemc_mmio_base + MEMCLKCFG);
-	csadrcfg[0] = __raw_readl(smemc_mmio_base + CSADRCFG0);
-	csadrcfg[1] = __raw_readl(smemc_mmio_base + CSADRCFG1);
-	csadrcfg[2] = __raw_readl(smemc_mmio_base + CSADRCFG2);
-	csadrcfg[3] = __raw_readl(smemc_mmio_base + CSADRCFG3);
+	msc[0] = __raw_readl(MSC0);
+	msc[1] = __raw_readl(MSC1);
+	sxcnfg = __raw_readl(SXCNFG);
+	memclkcfg = __raw_readl(MEMCLKCFG);
+	csadrcfg[0] = __raw_readl(CSADRCFG0);
+	csadrcfg[1] = __raw_readl(CSADRCFG1);
+	csadrcfg[2] = __raw_readl(CSADRCFG2);
+	csadrcfg[3] = __raw_readl(CSADRCFG3);
 
 	return 0;
 }
 
 static int pxa3xx_smemc_resume(struct sys_device *dev)
 {
-	__raw_writel(msc[0], smemc_mmio_base + MSC0);
-	__raw_writel(msc[1], smemc_mmio_base + MSC1);
-	__raw_writel(sxcnfg, smemc_mmio_base + SXCNFG);
-	__raw_writel(memclkcfg, smemc_mmio_base + MEMCLKCFG);
-	__raw_writel(csadrcfg[0], smemc_mmio_base + CSADRCFG0);
-	__raw_writel(csadrcfg[1], smemc_mmio_base + CSADRCFG1);
-	__raw_writel(csadrcfg[2], smemc_mmio_base + CSADRCFG2);
-	__raw_writel(csadrcfg[3], smemc_mmio_base + CSADRCFG3);
+	__raw_writel(msc[0], MSC0);
+	__raw_writel(msc[1], MSC1);
+	__raw_writel(sxcnfg, SXCNFG);
+	__raw_writel(memclkcfg, MEMCLKCFG);
+	__raw_writel(csadrcfg[0], CSADRCFG0);
+	__raw_writel(csadrcfg[1], CSADRCFG1);
+	__raw_writel(csadrcfg[2], CSADRCFG2);
+	__raw_writel(csadrcfg[3], CSADRCFG3);
 
 	return 0;
 }
@@ -73,10 +60,6 @@ static int __init smemc_init(void)
 	int ret = 0;
 
 	if (cpu_is_pxa3xx()) {
-		smemc_mmio_base = ioremap(SMEMC_PHYS_BASE, SMEMC_PHYS_SIZE);
-		if (smemc_mmio_base == NULL)
-			return -ENODEV;
-
 		ret = sysdev_class_register(&smemc_sysclass);
 		if (ret)
 			return ret;
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f736119f1eb..0bc938729c4 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -23,10 +23,11 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
-#include <linux/mtd/physmap.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/mtd/sharpsl.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/regulator/machine.h>
+#include <linux/io.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -41,9 +42,9 @@
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
-#include <mach/pxa2xx_spi.h>
 #include <mach/spitz.h>
 #include <mach/sharpsl_pm.h>
+#include <mach/smemc.h>
 
 #include <plat/i2c.h>
 
@@ -929,9 +930,10 @@ static void spitz_poweroff(void)
 
 static void spitz_restart(char mode, const char *cmd)
 {
+	uint32_t msc0 = __raw_readl(MSC0);
 	/* Bootloader magic for a reboot */
-	if ((MSC0 & 0xffff0000) == 0x7ff00000)
-		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+	if ((msc0 & 0xffff0000) == 0x7ff00000)
+		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
 
 	spitz_poweroff();
 }
@@ -980,7 +982,7 @@ static void __init spitz_fixup(struct machine_desc *desc,
 #ifdef CONFIG_MACH_SPITZ
 MACHINE_START(SPITZ, "SHARP Spitz")
 	.fixup		= spitz_fixup,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
@@ -990,7 +992,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_BORZOI
 MACHINE_START(BORZOI, "SHARP Borzoi")
 	.fixup		= spitz_fixup,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
@@ -1000,7 +1002,7 @@ MACHINE_END
 #ifdef CONFIG_MACH_AKITA
 MACHINE_START(AKITA, "SHARP Akita")
 	.fixup		= spitz_fixup,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 738adc1773f..9a14fdb83c8 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -46,10 +46,11 @@
 #include <plat/i2c.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
-#include <mach/pxa2xx_spi.h>
 #include <mach/pxa27x-udc.h>
+#include <mach/smemc.h>
 
 #include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/mfd/da903x.h>
 #include <linux/sht15.h>
 
@@ -976,7 +977,7 @@ static void __init stargate2_init(void)
 {
 	/* This is probably a board specific hack as this must be set
 	   prior to connecting the MFP stuff up. */
-	MECR &= ~MECR_NOS;
+	__raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
 
@@ -998,7 +999,7 @@ static void __init stargate2_init(void)
 
 #ifdef CONFIG_MACH_INTELMOTE2
 MACHINE_START(INTELMOTE2, "IMOTE 2")
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= imote2_init,
@@ -1008,7 +1009,7 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_STARGATE2
 MACHINE_START(STARGATE2, "Stargate 2")
-	.map_io = pxa_map_io,
+	.map_io = pxa27x_map_io,
 	.nr_irqs = STARGATE_NR_IRQS,
 	.init_irq = pxa27x_init_irq,
 	.timer = &pxa_timer,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 2ea7545273a..9cecf8366db 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -490,7 +490,7 @@ static void __init tavorevb_init(void)
 MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
 	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = tavorevb_init,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index dc3011697bb..70191a9450e 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -127,7 +127,7 @@ static void __init evb3_init(void)
 
 MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
 	.boot_params	= 0xa0000100,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa3xx_map_io,
 	.nr_irqs	= TAVOREVB3_NR_IRQS,
 	.init_irq       = pxa3xx_init_irq,
 	.timer          = &pxa_timer,
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 293e40aeaf2..e7f64d9b4f2 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -17,11 +17,11 @@
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/sched.h>
-#include <linux/cnt32_to_63.h>
 
 #include <asm/div64.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <asm/sched_clock.h>
 #include <mach/regs-ost.h>
 
 /*
@@ -32,29 +32,18 @@
  * long as there is always less than 582 seconds between successive
  * calls to sched_clock() which should always be the case in practice.
  */
+static DEFINE_CLOCK_DATA(cd);
 
-#define OSCR2NS_SCALE_FACTOR 10
-
-static unsigned long oscr2ns_scale;
-
-static void __init set_oscr2ns_scale(unsigned long oscr_rate)
+unsigned long long notrace sched_clock(void)
 {
-	unsigned long long v = 1000000000ULL << OSCR2NS_SCALE_FACTOR;
-	do_div(v, oscr_rate);
-	oscr2ns_scale = v;
-	/*
-	 * We want an even value to automatically clear the top bit
-	 * returned by cnt32_to_63() without an additional run time
-	 * instruction. So if the LSB is 1 then round it up.
-	 */
-	if (oscr2ns_scale & 1)
-		oscr2ns_scale++;
+	u32 cyc = OSCR;
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
 }
 
-unsigned long long sched_clock(void)
+static void notrace pxa_update_sched_clock(void)
 {
-	unsigned long long v = cnt32_to_63(OSCR);
-	return (v * oscr2ns_scale) >> OSCR2NS_SCALE_FACTOR;
+	u32 cyc = OSCR;
+	update_sched_clock(&cd, cyc, (u32)~0);
 }
 
 
@@ -127,7 +116,6 @@ static struct clocksource cksrc_pxa_oscr0 = {
 	.rating         = 200,
 	.read           = pxa_read_oscr,
 	.mask           = CLOCKSOURCE_MASK(32),
-	.shift          = 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -145,7 +133,7 @@ static void __init pxa_timer_init(void)
 	OIER = 0;
 	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
 
-	set_oscr2ns_scale(clock_tick_rate);
+	init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate);
 
 	ckevt_pxa_osmr0.mult =
 		div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
@@ -155,12 +143,9 @@ static void __init pxa_timer_init(void)
 		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
 	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
 
-	cksrc_pxa_oscr0.mult =
-		clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift);
-
 	setup_irq(IRQ_OST0, &pxa_ost0_irq);
 
-	clocksource_register(&cksrc_pxa_oscr0);
+	clocksource_register_hz(&cksrc_pxa_oscr0, clock_tick_rate);
 	clockevents_register_device(&ckevt_pxa_osmr0);
 }
 
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 0ee1df49606..af152e70cfc 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -32,6 +32,7 @@
 #include <linux/gpio.h>
 #include <linux/pda_power.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/input/matrix_keypad.h>
 
 #include <asm/setup.h>
@@ -44,8 +45,8 @@
 #include <mach/mmc.h>
 #include <mach/udc.h>
 #include <mach/tosa_bt.h>
-#include <mach/pxa2xx_spi.h>
 #include <mach/audio.h>
+#include <mach/smemc.h>
 
 #include <asm/mach/arch.h>
 #include <mach/tosa.h>
@@ -893,9 +894,11 @@ static void tosa_poweroff(void)
 
 static void tosa_restart(char mode, const char *cmd)
 {
+	uint32_t msc0 = __raw_readl(MSC0);
+
 	/* Bootloader magic for a reboot */
-	if((MSC0 & 0xffff0000) == 0x7ff00000)
-		MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
+	if((msc0 & 0xffff0000) == 0x7ff00000)
+		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
 
 	tosa_poweroff();
 }
@@ -953,7 +956,7 @@ static void __init fixup_tosa(struct machine_desc *desc,
 
 MACHINE_START(TOSA, "SHARP Tosa")
 	.fixup          = fixup_tosa,
-	.map_io         = pxa_map_io,
+	.map_io         = pxa25x_map_io,
 	.nr_irqs	= TOSA_NR_IRQS,
 	.init_irq       = pxa25x_init_irq,
 	.init_machine   = tosa_init,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 565d062f51d..423261d63d0 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -40,13 +40,13 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
-#include <mach/pxa2xx_spi.h>
 #include <mach/trizeps4.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
+#include <mach/smemc.h>
 #include <plat/i2c.h>
 
 #include "generic.h"
@@ -539,10 +539,10 @@ static void __init trizeps4_init(void)
 
 static void __init trizeps4_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 
-	if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+	if ((__raw_readl(MSC0) & 0x8) && (__raw_readl(BOOT_DEF) & 0x1)) {
 		/* if flash is 16 bit wide its a Trizeps4 WL */
 		__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
 		trizeps4_flash_data[0].width = 2;
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 438fc9a5ed5..de69b203afa 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -983,7 +983,7 @@ static struct map_desc viper_io_desc[] __initdata = {
 
 static void __init viper_map_io(void)
 {
-	pxa_map_io();
+	pxa25x_map_io();
 
 	iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
 
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index f45ac096177..b9b579715ff 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -719,7 +719,7 @@ static void __init vpac270_init(void)
 
 MACHINE_START(VPAC270, "Voipac PXA270")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= vpac270_init
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 3260ce73d32..51c0281c6e0 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -31,6 +31,7 @@
 #include <mach/hardware.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa25x.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 
@@ -172,9 +173,9 @@ static void __init xcep_init(void)
 
 	/* See Intel XScale Developer's Guide for details */
 	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
-	MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+	__raw_writel((__raw_readl(MSC1) & 0xffff) | 0xD5540000, MSC1);
 	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
-	MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+	__raw_writel((__raw_readl(MSC2) & 0xffff) | 0x72A00000, MSC2);
 
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 	pxa_set_i2c_info(&xcep_i2c_platform_data);
@@ -183,7 +184,7 @@ static void __init xcep_init(void)
 MACHINE_START(XCEP, "Iskratel XCEP")
 	.boot_params	= 0xa0000100,
 	.init_machine	= xcep_init,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa25x_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index fefde9848d8..a323e076129 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -20,6 +20,7 @@
 #include <linux/z2_battery.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/spi/libertas_spi.h>
 #include <linux/spi/lms283gf05.h>
 #include <linux/power_supply.h>
@@ -38,7 +39,6 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <plat/pxa27x_keypad.h>
-#include <mach/pxa2xx_spi.h>
 
 #include <plat/i2c.h>
 
@@ -704,7 +704,7 @@ static void __init z2_init(void)
 
 MACHINE_START(ZIPIT2, "Zipit Z2")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa27x_map_io,
 	.init_irq	= pxa27x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= z2_init,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index dea46a2d089..bf034c7670d 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -20,6 +20,7 @@
 #include <linux/dm9000.h>
 #include <linux/mmc/host.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
@@ -41,12 +42,12 @@
 #include <mach/pxa27x-udc.h>
 #include <mach/udc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa2xx_spi.h>
 #include <mach/mfp-pxa27x.h>
 #include <mach/pm.h>
 #include <mach/audio.h>
 #include <mach/arcom-pcmcia.h>
 #include <mach/zeus.h>
+#include <mach/smemc.h>
 
 #include "generic.h"
 
@@ -823,13 +824,16 @@ static mfp_cfg_t zeus_pin_config[] __initdata = {
 static void __init zeus_init(void)
 {
 	u16 dm9000_msc = DM9K_MSC_VALUE;
+	u32 msc0, msc1;
 
 	system_rev = __raw_readw(ZEUS_CPLD_VERSION);
 	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
 
 	/* Fix timings for dm9000s (CS1/CS2)*/
-	MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16);
-	MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
+	msc0 = __raw_readl(MSC0) & 0x0000ffff | (dm9000_msc << 16);
+	msc1 = __raw_readl(MSC1) & 0xffff0000 | dm9000_msc;
+	__raw_writel(msc0, MSC0);
+	__raw_writel(msc1, MSC1);
 
 	pm_power_off = zeus_power_off;
 	zeus_setup_apm();
@@ -883,7 +887,7 @@ static struct map_desc zeus_io_desc[] __initdata = {
 
 static void __init zeus_map_io(void)
 {
-	pxa_map_io();
+	pxa27x_map_io();
 
 	iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
 
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 702f7a68e87..a4c784aab76 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -423,7 +423,7 @@ static void __init zylonite_init(void)
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
 	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
+	.map_io		= pxa3xx_map_io,
 	.nr_irqs	= ZYLONITE_NR_IRQS,
 	.init_irq	= pxa3xx_init_irq,
 	.timer		= &pxa_timer,
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 07c08151dfe..1c6602cf50e 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,8 +30,8 @@
 #include <linux/ata_platform.h>
 #include <linux/amba/mmci.h>
 #include <linux/gfp.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
 #include <asm/system.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -47,15 +47,13 @@
 
 #include <asm/hardware/gic.h>
 
-#include <mach/clkdev.h>
 #include <mach/platform.h>
 #include <mach/irqs.h>
-#include <plat/timer-sp.h>
+#include <asm/hardware/timer-sp.h>
 
-#include "core.h"
+#include <plat/sched_clock.h>
 
-/* used by entry-macro.S and platsmp.c */
-void __iomem *gic_cpu_base_addr;
+#include "core.h"
 
 #ifdef CONFIG_ZONE_DMA
 /*
@@ -658,6 +656,12 @@ void realview_leds_event(led_event_t ledevt)
 #endif	/* CONFIG_LEDS */
 
 /*
+ * The sched_clock counter
+ */
+#define REFCOUNTER		(__io_address(REALVIEW_SYS_BASE) + \
+				 REALVIEW_SYS_24MHz_OFFSET)
+
+/*
  * Where is the timer (VA)?
  */
 void __iomem *timer0_va_base;
@@ -672,6 +676,8 @@ void __init realview_timer_init(unsigned int timer_irq)
 {
 	u32 val;
 
+	versatile_sched_clock_init(REFCOUNTER, 24000000);
+
 	/* 
 	 * set clock frequency: 
 	 *	REALVIEW_REFCLK is 32KHz
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 781bca68a9f..693239ddc39 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -53,7 +53,6 @@ extern struct platform_device realview_i2c_device;
 extern struct mmci_platform_data realview_mmc0_plat_data;
 extern struct mmci_platform_data realview_mmc1_plat_data;
 extern struct clcd_board clcd_plat_data;
-extern void __iomem *gic_cpu_base_addr;
 extern void __iomem *timer0_va_base;
 extern void __iomem *timer1_va_base;
 extern void __iomem *timer2_va_base;
diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S
index 4075473cf68..b34be4554d4 100644
--- a/arch/arm/mach-realview/headsmp.S
+++ b/arch/arm/mach-realview/headsmp.S
@@ -35,5 +35,6 @@ pen:	ldr	r7, [r6]
 	 */
 	b	secondary_startup
 
+	.align
 1:	.long	.
 	.long	pen_release
diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c
index f95521a5e5c..a87523d095e 100644
--- a/arch/arm/mach-realview/hotplug.c
+++ b/arch/arm/mach-realview/hotplug.c
@@ -11,14 +11,11 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 
 extern volatile int pen_release;
 
-static DECLARE_COMPLETION(cpu_killed);
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -34,10 +31,10 @@ static inline void cpu_enter_lowpower(void)
 	"	bic	%0, %0, #0x20\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, #0x04\n"
+	"	bic	%0, %0, %2\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	  : "=&r" (v)
-	  : "r" (0)
+	  : "r" (0), "Ir" (CR_C)
 	  : "cc");
 }
 
@@ -46,17 +43,17 @@ static inline void cpu_leave_lowpower(void)
 	unsigned int v;
 
 	asm volatile(	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, #0x04\n"
+	"	orr	%0, %0, %1\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	"	mrc	p15, 0, %0, c1, c0, 1\n"
 	"	orr	%0, %0, #0x20\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	  : "=&r" (v)
-	  :
+	  : "Ir" (CR_C)
 	  : "cc");
 }
 
-static inline void platform_do_lowpower(unsigned int cpu)
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 {
 	/*
 	 * there is no power-control hardware on this platform, so all
@@ -80,22 +77,19 @@ static inline void platform_do_lowpower(unsigned int cpu)
 		}
 
 		/*
-		 * getting here, means that we have come out of WFI without
+		 * Getting here, means that we have come out of WFI without
 		 * having been woken up - this shouldn't happen
 		 *
-		 * The trouble is, letting people know about this is not really
-		 * possible, since we are currently running incoherently, and
-		 * therefore cannot safely call printk() or anything else
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
 		 */
-#ifdef DEBUG
-		printk("CPU%u: spurious wakeup call\n", cpu);
-#endif
+		(*spurious)++;
 	}
 }
 
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -105,30 +99,22 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-#ifdef DEBUG
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-#endif
-
-	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
+	int spurious = 0;
 
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
 	cpu_enter_lowpower();
-	platform_do_lowpower(cpu);
+	platform_do_lowpower(cpu, &spurious);
 
 	/*
 	 * bring this CPU back into the world of cache
 	 * coherency, and then restore interrupts
 	 */
 	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
 
 int platform_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
index 340a5c27694..4071164aeba 100644
--- a/arch/arm/mach-realview/include/mach/entry-macro.S
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -8,74 +8,11 @@
  * warranty of any kind, whether express or implied.
  */
 #include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
 
 		.macro	disable_fiq
 		.endm
 
-		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =gic_cpu_base_addr
-		ldr	\base, [\base]
-		.endm
-
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
 
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an interrupt if it's
-		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number of the highest
-                 * priority enabled interrupt.  We then just need to check whether it is in the
-		 * valid range for an IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #29
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ acknowledge
-		 * register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of interrupt on the
-		 * controller, since this requires the original irqstat value which
-		 * we won't easily be able to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
-
-		/* As above, this assumes that irqstat and base are preserved.. */
-
-		.macro test_for_ltirq, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		mov 	\tmp, #0
-		cmp	\irqnr, #29
-		moveq	\tmp, #1
-		streq	\irqstat, [\base, #GIC_CPU_EOI]
-		cmp	\tmp, #0
-		.endm
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index d3cd265cb05..c8221b38ee7 100644
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -2,14 +2,13 @@
 #define ASMARM_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 
 #endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 009265818d5..a22bf67f2f7 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -19,7 +19,6 @@
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/localtimer.h>
 #include <asm/unified.h>
 
 #include <mach/board-eb.h>
@@ -37,6 +36,19 @@ extern void realview_secondary_startup(void);
  */
 volatile int __cpuinitdata pen_release = -1;
 
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
 static void __iomem *scu_base_addr(void)
 {
 	if (machine_is_realview_eb_mp())
@@ -50,33 +62,22 @@ static void __iomem *scu_base_addr(void)
 		return (void __iomem *)0;
 }
 
-static inline unsigned int get_core_count(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	if (scu_base)
-		return scu_get_core_count(scu_base);
-	return 1;
-}
-
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(0, gic_cpu_base_addr);
+	gic_secondary_init(0);
 
 	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
-	pen_release = -1;
-	smp_wmb();
+	write_pen_release(-1);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -103,20 +104,14 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Note that "pen_release" is the hardware CPU ID, whereas
 	 * "cpu" is Linux's internal ID.
 	 */
-	pen_release = cpu;
-	flush_cache_all();
+	write_pen_release(cpu);
 
 	/*
-	 * XXX
-	 *
-	 * This is a later addition to the booting protocol: the
-	 * bootMonitor now puts secondary cores into WFI, so
-	 * poke_milo() no longer gets the cores moving; we need
-	 * to send a soft interrupt to wake the secondary core.
-	 * Use smp_cross_call() for this, since there's little
-	 * point duplicating the code here
+	 * Send the secondary CPU a soft interrupt, thereby causing
+	 * the boot monitor to read the system wide flags register,
+	 * and branch to the address found there.
 	 */
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -136,48 +131,18 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return pen_release != -1 ? -ENOSYS : 0;
 }
 
-static void __init poke_milo(void)
-{
-	/* nobody is to be released from the pen yet */
-	pen_release = -1;
-
-	/*
-	 * Write the address of secondary startup into the system-wide flags
-	 * register. The BootMonitor waits for this register to become
-	 * non-zero.
-	 */
-	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
-		     __io_address(REALVIEW_SYS_FLAGSSET));
-
-	mb();
-}
-
 /*
  * Initialise the CPU possible map early - this describes the CPUs
  * which may be present or become present in the system.
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores = get_core_count();
+	void __iomem *scu_base = scu_base_addr();
+	unsigned int i, ncores;
 
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	unsigned int ncores = get_core_count();
-	unsigned int cpu = smp_processor_id();
-	int i;
+	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "Realview: strange CM count of 0? Default to 1\n");
-
-		ncores = 1;
-	}
-
 	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "Realview: no. of cores (%d) greater than configured "
@@ -186,13 +151,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		ncores = NR_CPUS;
 	}
 
-	smp_store_cpu_info(cpu);
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
 
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int i;
 
 	/*
 	 * Initialise the present map, which describes the set of CPUs
@@ -201,21 +166,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
+	scu_enable(scu_base_addr());
+
 	/*
-	 * Initialise the SCU if there are more than one CPU and let
-	 * them know where to start. Note that, on modern versions of
-	 * MILO, the "poke" doesn't actually do anything until each
-	 * individual core is sent a soft interrupt to get it out of
-	 * WFI
+	 * Write the address of secondary startup into the
+	 * system-wide flags register. The BootMonitor waits
+	 * until it receives a soft interrupt, and then the
+	 * secondary CPU branches to this address.
 	 */
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		scu_enable(scu_base_addr());
-		poke_milo();
-	}
+	__raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
+		     __io_address(REALVIEW_SYS_FLAGSSET));
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index f2697106f80..6ef5c5e528b 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -364,21 +364,19 @@ static void __init gic_init_irq(void)
 		writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
 
 		/* core tile GIC, primary */
-		gic_cpu_base_addr = __io_address(REALVIEW_EB11MP_GIC_CPU_BASE);
-		gic_dist_init(0, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), 29);
-		gic_cpu_init(0, gic_cpu_base_addr);
+		gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE),
+			 __io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
 
 #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
 		/* board GIC, secondary */
-		gic_dist_init(1, __io_address(REALVIEW_EB_GIC_DIST_BASE), 64);
-		gic_cpu_init(1, __io_address(REALVIEW_EB_GIC_CPU_BASE));
+		gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE),
+			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
 		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
 #endif
 	} else {
 		/* board GIC, primary */
-		gic_cpu_base_addr = __io_address(REALVIEW_EB_GIC_CPU_BASE);
-		gic_dist_init(0, __io_address(REALVIEW_EB_GIC_DIST_BASE), 29);
-		gic_cpu_init(0, gic_cpu_base_addr);
+		gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE),
+			 __io_address(REALVIEW_EB_GIC_CPU_BASE));
 	}
 }
 
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index a4125619d71..cbdc97a5685 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -304,13 +304,14 @@ static struct platform_device char_lcd_device = {
 static void __init gic_init_irq(void)
 {
 	/* ARM1176 DevChip GIC, primary */
-	gic_cpu_base_addr = __io_address(REALVIEW_DC1176_GIC_CPU_BASE);
-	gic_dist_init(0, __io_address(REALVIEW_DC1176_GIC_DIST_BASE), IRQ_DC1176_GIC_START);
-	gic_cpu_init(0, gic_cpu_base_addr);
+	gic_init(0, IRQ_DC1176_GIC_START,
+		 __io_address(REALVIEW_DC1176_GIC_DIST_BASE),
+		 __io_address(REALVIEW_DC1176_GIC_CPU_BASE));
 
 	/* board GIC, secondary */
-	gic_dist_init(1, __io_address(REALVIEW_PB1176_GIC_DIST_BASE), IRQ_PB1176_GIC_START);
-	gic_cpu_init(1, __io_address(REALVIEW_PB1176_GIC_CPU_BASE));
+	gic_init(1, IRQ_PB1176_GIC_START,
+		 __io_address(REALVIEW_PB1176_GIC_DIST_BASE),
+		 __io_address(REALVIEW_PB1176_GIC_CPU_BASE));
 	gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1);
 }
 
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 117b95b2ca1..8e8ab7d29a6 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -309,13 +309,13 @@ static void __init gic_init_irq(void)
 	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
 
 	/* ARM11MPCore test chip GIC, primary */
-	gic_cpu_base_addr = __io_address(REALVIEW_TC11MP_GIC_CPU_BASE);
-	gic_dist_init(0, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, gic_cpu_base_addr);
+	gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE),
+		 __io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
 
 	/* board GIC, secondary */
-	gic_dist_init(1, __io_address(REALVIEW_PB11MP_GIC_DIST_BASE), IRQ_PB11MP_GIC_START);
-	gic_cpu_init(1, __io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
+	gic_init(1, IRQ_PB11MP_GIC_START,
+		 __io_address(REALVIEW_PB11MP_GIC_DIST_BASE),
+		 __io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
 	gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
 }
 
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 929b8dc12e8..841118e3e11 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -273,9 +273,9 @@ static struct platform_device pmu_device = {
 static void __init gic_init_irq(void)
 {
 	/* ARM PB-A8 on-board GIC */
-	gic_cpu_base_addr = __io_address(REALVIEW_PBA8_GIC_CPU_BASE);
-	gic_dist_init(0, __io_address(REALVIEW_PBA8_GIC_DIST_BASE), IRQ_PBA8_GIC_START);
-	gic_cpu_init(0, __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
+	gic_init(0, IRQ_PBA8_GIC_START,
+		 __io_address(REALVIEW_PBA8_GIC_DIST_BASE),
+		 __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
 }
 
 static void __init realview_pba8_timer_init(void)
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index b9f9e20031a..02b755b009d 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -313,15 +313,12 @@ static void __init gic_init_irq(void)
 {
 	/* ARM PBX on-board GIC */
 	if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
-		gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
-		gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
-			      29);
-		gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
+		gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+			 __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
 	} else {
-		gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
-		gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
-			      IRQ_PBX_GIC_START);
-		gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
+		gic_init(0, IRQ_PBX_GIC_START,
+			 __io_address(REALVIEW_PBX_GIC_DIST_BASE),
+			 __io_address(REALVIEW_PBX_GIC_CPU_BASE));
 	}
 }
 
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
index 3bcd86fadb8..fb700228637 100644
--- a/arch/arm/mach-rpc/include/mach/vmalloc.h
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -7,4 +7,4 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define VMALLOC_END       0xdc000000
+#define VMALLOC_END       0xdc000000UL
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 8aa2f1902a9..6b86a722a7d 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
 
 	/* Configures BT serial port GPIOs */
 	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
 
 
 	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index cef6a65637b..e82ab4aa7ab 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -16,7 +16,7 @@ config CPU_S3C2412
 config CPU_S3C2412_ONLY
 	bool
 	depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
-		   !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+		   !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
 		   !CPU_S3C2443 && CPU_S3C2412
 	default y if CPU_S3C2412
 
@@ -28,9 +28,16 @@ config S3C2412_DMA
 
 config S3C2412_PM
 	bool
+	select S3C2412_PM_SLEEP
 	help
 	  Internal config node to apply S3C2412 power management
 
+config S3C2412_PM_SLEEP
+	bool
+	help
+	  Internal config node to apply sleep for S3C2412 power management.
+	  Can be selected by another SoCs with similar sleep procedure.
+
 # Note, the S3C2412 IOtiming support is in plat-s3c24xx
 
 config S3C2412_CPUFREQ
@@ -52,7 +59,7 @@ config MACH_JIVE
 	  Say Y here if you are using the Logitech Jive.
 
 config MACH_JIVE_SHOW_BOOTLOADER
-	bool "Allow access to bootloader partitions in MTD"
+	bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
 	depends on MACH_JIVE && EXPERIMENTAL
 
 config MACH_SMDK2413
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
index 530ec46cbae..6c48a91ea39 100644
--- a/arch/arm/mach-s3c2412/Makefile
+++ b/arch/arm/mach-s3c2412/Makefile
@@ -14,7 +14,8 @@ obj-$(CONFIG_CPU_S3C2412)	+= irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= clock.o
 obj-$(CONFIG_CPU_S3C2412)	+= gpio.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma.o
-obj-$(CONFIG_S3C2412_PM)	+= pm.o sleep.o
+obj-$(CONFIG_S3C2412_PM)	+= pm.o
+obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep.o
 obj-$(CONFIG_S3C2412_CPUFREQ)	+= cpu-freq.o
 
 # Machine support
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index 87b9c9f003b..df8d14974c9 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -27,6 +27,7 @@ config S3C2416_DMA
 
 config S3C2416_PM
 	bool
+	select S3C2412_PM_SLEEP
 	help
 	  Internal config node to apply S3C2416 power management
 
@@ -35,9 +36,12 @@ menu "S3C2416 Machines"
 config MACH_SMDK2416
 	bool "SMDK2416"
 	select CPU_S3C2416
+	select MACH_SMDK
 	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	select S3C2416_PM if PM
 	help
 	  Say Y here if you are using an SMDK2416
diff --git a/arch/arm/mach-s3c2416/irq.c b/arch/arm/mach-s3c2416/irq.c
index 084d121f368..00174daf152 100644
--- a/arch/arm/mach-s3c2416/irq.c
+++ b/arch/arm/mach-s3c2416/irq.c
@@ -168,12 +168,11 @@ static struct irq_chip s3c2416_irq_dma = {
 
 static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2416_irq_demux(IRQ_S3C2443_UART3, 3);
+	s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
 static void s3c2416_irq_uart3_mask(unsigned int irqno)
 {
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index ff024a6c0f8..a0cb2581894 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -18,6 +18,7 @@ config CPU_S3C2440
 config CPU_S3C2442
 	bool
 	select CPU_ARM920T
+	select S3C_GPIO_PULL_DOWN
 	select S3C2410_CLOCK
 	select S3C2410_GPIO
 	select S3C2410_PM if PM
@@ -178,6 +179,9 @@ config MACH_MINI2440
 	bool "MINI2440 development board"
 	select CPU_S3C2440
 	select EEPROM_AT24
+	select NEW_LEDS
+	select LEDS_CLASS
+	select LEDS_TRIGGER
 	select LEDS_TRIGGER_BACKLIGHT
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index d50f3ae6173..f7663f731ea 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -46,9 +46,6 @@ int __init s3c2440_init(void)
 {
 	printk("S3C2440: Initialising architecture\n");
 
-	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
-	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
-
 	/* change irq for watchdog */
 
 	s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
@@ -58,3 +55,11 @@ int __init s3c2440_init(void)
 
 	return sysdev_register(&s3c2440_sysdev);
 }
+
+void __init s3c2440_map_io(void)
+{
+	s3c244x_map_io();
+
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+}
diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c
index 188ad1e57dc..ecf81354655 100644
--- a/arch/arm/mach-s3c2440/s3c2442.c
+++ b/arch/arm/mach-s3c2440/s3c2442.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/mutex.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/io.h>
 
@@ -43,6 +44,11 @@
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
+#include <plat/s3c244x.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
 
 /* S3C2442 extended clock support */
 
@@ -163,3 +169,11 @@ int __init s3c2442_init(void)
 
 	return sysdev_register(&s3c2442_sysdev);
 }
+
+void __init s3c2442_map_io(void)
+{
+	s3c244x_map_io();
+
+	s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
+	s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 4fef723126f..31babec90ce 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -5,6 +5,7 @@
 config CPU_S3C2443
 	bool
 	depends on ARCH_S3C2410
+	select CPU_ARM920T
 	select S3C2443_DMA if S3C2410_DMA
 	select CPU_LLSERIAL_S3C2440
 	select SAMSUNG_CLKSRC
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index 0e0d693f397..893424767ce 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -166,12 +166,11 @@ static struct irq_chip s3c2443_irq_dma = {
 
 static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
 {
-	s3c2443_irq_demux(IRQ_S3C2443_UART3, 3);
+	s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
 }
 
 #define INTMSK_UART3	(1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3	(0xf << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
+#define SUBMSK_UART3	(0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
 
 static void s3c2443_irq_uart3_mask(unsigned int irqno)
 {
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 1ca7bdc6485..579d2f0f4dd 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -143,7 +143,7 @@ config MACH_SMDK6410
 	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select SAMSUNG_DEV_KEYPAD
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_IDE
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 249c6295647..89f35e02e88 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -45,7 +45,7 @@
 
 #include <video/platform_lcd.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index f9ef9b5c5f5..4957ab0a0d4 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -46,7 +46,7 @@
 
 #include <video/platform_lcd.h>
 
-#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 28677caf361..461aa035afc 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -378,6 +378,12 @@ static struct max8998_regulator_data aquila_regulators[] = {
 static struct max8998_platform_data aquila_max8998_pdata = {
 	.num_regulators	= ARRAY_SIZE(aquila_regulators),
 	.regulators	= aquila_regulators,
+	.buck1_set1	= S5PV210_GPH0(3),
+	.buck1_set2	= S5PV210_GPH0(4),
+	.buck2_set3	= S5PV210_GPH0(5),
+	.buck1_max_voltage1 = 1200000,
+	.buck1_max_voltage2 = 1200000,
+	.buck2_max_voltage = 1200000,
 };
 #endif
 
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index b1dcf964a76..e22d5112fd4 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -518,6 +518,12 @@ static struct max8998_regulator_data goni_regulators[] = {
 static struct max8998_platform_data goni_max8998_pdata = {
 	.num_regulators	= ARRAY_SIZE(goni_regulators),
 	.regulators	= goni_regulators,
+	.buck1_set1	= S5PV210_GPH0(3),
+	.buck1_set2	= S5PV210_GPH0(4),
+	.buck2_set3	= S5PV210_GPH0(5),
+	.buck1_max_voltage1 = 1200000,
+	.buck1_max_voltage2 = 1200000,
+	.buck2_max_voltage = 1200000,
 };
 #endif
 
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 0ad7924fe62..5dd1681c069 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/i2c.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index bcd7a5d5340..1fbc45b2a43 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/sysdev.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c
index 82ce4aa6d61..72ab289e781 100644
--- a/arch/arm/mach-s5pv310/cpu.c
+++ b/arch/arm/mach-s5pv310/cpu.c
@@ -24,8 +24,6 @@
 
 #include <mach/regs-irq.h>
 
-void __iomem *gic_cpu_base_addr;
-
 extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
 			 unsigned int irq_start);
 extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -122,9 +120,7 @@ void __init s5pv310_init_irq(void)
 {
 	int irq;
 
-	gic_cpu_base_addr = S5P_VA_GIC_CPU;
-	gic_dist_init(0, S5P_VA_GIC_DIST, IRQ_LOCALTIMER);
-	gic_cpu_init(0, S5P_VA_GIC_CPU);
+	gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
diff --git a/arch/arm/mach-s5pv310/hotplug.c b/arch/arm/mach-s5pv310/hotplug.c
index 03652c3605f..afa5392d9fc 100644
--- a/arch/arm/mach-s5pv310/hotplug.c
+++ b/arch/arm/mach-s5pv310/hotplug.c
@@ -13,14 +13,11 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 
 extern volatile int pen_release;
 
-static DECLARE_COMPLETION(cpu_killed);
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -33,13 +30,13 @@ static inline void cpu_enter_lowpower(void)
 	 * Turn off coherency
 	 */
 	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, #0x20\n"
+	"	bic	%0, %0, %2\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	"	mrc	p15, 0, %0, c1, c0, 0\n"
 	"	bic	%0, %0, #0x04\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	  : "=&r" (v)
-	  : "r" (0)
+	  : "r" (0), "Ir" (CR_C)
 	  : "cc");
 }
 
@@ -49,17 +46,17 @@ static inline void cpu_leave_lowpower(void)
 
 	asm volatile(
 	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, #0x04\n"
+	"	orr	%0, %0, %1\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	"	mrc	p15, 0, %0, c1, c0, 1\n"
 	"	orr	%0, %0, #0x20\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	  : "=&r" (v)
-	  :
+	  : "Ir" (CR_C)
 	  : "cc");
 }
 
-static inline void platform_do_lowpower(unsigned int cpu)
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 {
 	/*
 	 * there is no power-control hardware on this platform, so all
@@ -83,22 +80,19 @@ static inline void platform_do_lowpower(unsigned int cpu)
 		}
 
 		/*
-		 * getting here, means that we have come out of WFI without
+		 * Getting here, means that we have come out of WFI without
 		 * having been woken up - this shouldn't happen
 		 *
-		 * The trouble is, letting people know about this is not really
-		 * possible, since we are currently running incoherently, and
-		 * therefore cannot safely call printk() or anything else
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
 		 */
-#ifdef DEBUG
-		printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu);
-#endif
+		(*spurious)++;
 	}
 }
 
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -108,30 +102,22 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-#ifdef DEBUG
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-#endif
-
-	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
+	int spurious = 0;
 
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
 	cpu_enter_lowpower();
-	platform_do_lowpower(cpu);
+	platform_do_lowpower(cpu, &spurious);
 
 	/*
 	 * bring this CPU back into the world of cache
 	 * coherency, and then restore interrupts
 	 */
 	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
 
 int platform_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/mach-s5pv310/include/mach/smp.h b/arch/arm/mach-s5pv310/include/mach/smp.h
index b7ec252384f..393ccbd52c4 100644
--- a/arch/arm/mach-s5pv310/include/mach/smp.h
+++ b/arch/arm/mach-s5pv310/include/mach/smp.h
@@ -7,16 +7,13 @@
 #define ASM_ARCH_SMP_H __FILE__
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
-
-extern void __iomem *gic_cpu_base_addr;
 
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 
 #endif
diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c
index d357c198ede..34093b069f6 100644
--- a/arch/arm/mach-s5pv310/platsmp.c
+++ b/arch/arm/mach-s5pv310/platsmp.c
@@ -22,7 +22,6 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <asm/unified.h>
 
@@ -38,6 +37,19 @@ extern void s5pv310_secondary_startup(void);
 
 volatile int __cpuinitdata pen_release = -1;
 
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
 static void __iomem *scu_base_addr(void)
 {
 	return (void __iomem *)(S5P_VA_SCU);
@@ -47,21 +59,18 @@ static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(0, gic_cpu_base_addr);
+	gic_secondary_init(0);
 
 	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
-	pen_release = -1;
-	smp_wmb();
+	write_pen_release(-1);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -88,16 +97,14 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * Note that "pen_release" is the hardware CPU ID, whereas
 	 * "cpu" is Linux's internal ID.
 	 */
-	pen_release = cpu;
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+	write_pen_release(cpu);
 
 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 */
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -130,13 +137,6 @@ void __init smp_init_cpus(void)
 	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "S5PV310: strange CM count of 0? Default to 1\n");
-
-		ncores = 1;
-	}
-
 	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "S5PV310: no. of cores (%d) greater than configured "
@@ -149,18 +149,10 @@ void __init smp_init_cpus(void)
 		set_cpu_possible(i, true);
 }
 
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int ncores = num_possible_cpus();
-	unsigned int cpu = smp_processor_id();
 	int i;
 
-	smp_store_cpu_info(cpu);
-
-	/* are we trying to boot more cores than exist? */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
@@ -168,25 +160,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
+	scu_enable(scu_base_addr());
+
 	/*
-	 * Initialise the SCU if there are more than one CPU and let
-	 * them know where to start.
+	 * Write the address of secondary startup into the
+	 * system-wide flags register. The boot monitor waits
+	 * until it receives a soft interrupt, and then the
+	 * secondary CPU branches to this address.
 	 */
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		scu_enable(scu_base_addr());
-
-		/*
-		 * Write the address of secondary startup into the
-		 * system-wide flags register. The boot monitor waits
-		 * until it receives a soft interrupt, and then the
-		 * secondary CPU branches to this address.
-		 */
 	__raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM);
-	}
 }
diff --git a/arch/arm/mach-s5pv310/time.c b/arch/arm/mach-s5pv310/time.c
index 01b012ad1bf..b262d461533 100644
--- a/arch/arm/mach-s5pv310/time.c
+++ b/arch/arm/mach-s5pv310/time.c
@@ -211,7 +211,6 @@ struct clocksource pwm_clocksource = {
 	.rating		= 250,
 	.read		= s5pv310_pwm4_read,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS ,
 };
 
@@ -230,10 +229,7 @@ static void __init s5pv310_clocksource_init(void)
 	s5pv310_pwm_init(4, ~0);
 	s5pv310_pwm_start(4, 1);
 
-	pwm_clocksource.mult =
-		clocksource_khz2mult(clock_rate/1000, pwm_clocksource.shift);
-
-	if (clocksource_register(&pwm_clocksource))
+	if (clocksource_register_hz(&pwm_clocksource, clock_rate))
 		panic("%s: can't register clocksource\n", pwm_clocksource.name);
 }
 
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 5da8c35aa0d..42625e4d949 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -118,6 +118,16 @@ config SA1100_LART
 	  (also known as the LART).  See <http://www.lartmaker.nl/> for
 	  information on the LART.
 
+config SA1100_NANOENGINE
+	bool "nanoEngine"
+	select CPU_FREQ_SA1110
+	select PCI
+	select PCI_NANOENGINE
+	help
+	  Say Y here if you are using the Bright Star Engineering nanoEngine.
+	  See <http://www.brightstareng.com/arm/nanoeng.htm> for information
+	  on the BSE nanoEngine.
+
 config SA1100_PLEB
 	bool "PLEB"
 	select CPU_FREQ_SA1100
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 89349c1dd7a..e697691eed2 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -37,6 +37,9 @@ obj-$(CONFIG_SA1100_JORNADA720_SSP)	+= jornada720_ssp.o
 obj-$(CONFIG_SA1100_LART)		+= lart.o
 led-$(CONFIG_SA1100_LART)		+= leds-lart.o
 
+obj-$(CONFIG_SA1100_NANOENGINE)		+= nanoengine.o
+obj-$(CONFIG_PCI_NANOENGINE)		+= pci-nanoengine.o
+
 obj-$(CONFIG_SA1100_PLEB)		+= pleb.o
 
 obj-$(CONFIG_SA1100_SHANNON)		+= shannon.o
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 96f7dc103b5..07d4e8ba371 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -94,48 +94,47 @@
 
 #include "generic.h"
 
-typedef struct {
+struct sa1100_dram_regs {
 	int speed;
 	u32 mdcnfg;
 	u32 mdcas0;
 	u32 mdcas1;
 	u32 mdcas2;
-} sa1100_dram_regs_t;
+};
 
 
 static struct cpufreq_driver sa1100_driver;
 
-static sa1100_dram_regs_t sa1100_dram_settings[] =
-{
-	/* speed,     mdcnfg,     mdcas0,     mdcas1,     mdcas2  clock frequency */
-	{  59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff }, /*  59.0 MHz */
-	{  73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff }, /*  73.7 MHz */
-	{  88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff }, /*  88.5 MHz */
-	{ 103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff }, /* 103.2 MHz */
-	{ 118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff }, /* 118.0 MHz */
-	{ 132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff }, /* 132.7 MHz */
-	{ 147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff }, /* 147.5 MHz */
-	{ 162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff }, /* 162.2 MHz */
-	{ 176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff }, /* 176.9 MHz */
-	{ 191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff }, /* 191.7 MHz */
-	{ 206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff }, /* 206.4 MHz */
-	{ 221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff }, /* 221.2 MHz */
-	{ 235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1 }, /* 235.9 MHz */
-	{ 250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3 }, /* 250.7 MHz */
-	{ 265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3 }, /* 265.4 MHz */
-	{ 280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87 }, /* 280.2 MHz */
+static struct sa1100_dram_regs sa1100_dram_settings[] = {
+	/*speed,     mdcnfg,     mdcas0,     mdcas1,     mdcas2,   clock freq */
+	{ 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  59.0 MHz */
+	{ 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  73.7 MHz */
+	{ 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/*  88.5 MHz */
+	{103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */
+	{118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */
+	{132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */
+	{147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */
+	{162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */
+	{176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */
+	{191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */
+	{206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */
+	{221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */
+	{235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */
+	{250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */
+	{265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */
+	{280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */
 	{ 0, 0, 0, 0, 0 } /* last entry */
 };
 
 static void sa1100_update_dram_timings(int current_speed, int new_speed)
 {
-	sa1100_dram_regs_t *settings = sa1100_dram_settings;
+	struct sa1100_dram_regs *settings = sa1100_dram_settings;
 
 	/* find speed */
 	while (settings->speed != 0) {
-		if(new_speed == settings->speed)
+		if (new_speed == settings->speed)
 			break;
-		
+
 		settings++;
 	}
 
@@ -149,7 +148,7 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed)
 		/* We're going FASTER, so first relax the memory
 		 * timings before changing the core frequency
 		 */
-		
+
 		/* Half the memory access clock */
 		MDCNFG |= MDCNFG_CDB2;
 
@@ -187,7 +186,7 @@ static int sa1100_target(struct cpufreq_policy *policy,
 	struct cpufreq_freqs freqs;
 
 	new_ppcr = sa11x0_freq_to_ppcr(target_freq);
-	switch(relation){
+	switch (relation) {
 	case CPUFREQ_RELATION_L:
 		if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max)
 			new_ppcr--;
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 7252874d328..675bf8ef97e 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -16,28 +16,24 @@
  *
  * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type
  */
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
 
-#include <mach/hardware.h>
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
-#include <asm/system.h>
+
+#include <mach/hardware.h>
 
 #include "generic.h"
 
 #undef DEBUG
 
-static struct cpufreq_driver sa1110_driver;
-
 struct sdram_params {
-	const char name[16];
+	const char name[20];
 	u_char  rows;		/* bits				 */
 	u_char  cas_latency;	/* cycles			 */
 	u_char  tck;		/* clock cycle time (ns)	 */
@@ -107,6 +103,15 @@ static struct sdram_params sdram_tbl[] __initdata = {
 		.twr		= 8,
 		.refresh	= 64000,
 		.cas_latency	= 3,
+	}, {	/* Micron MT48LC8M16A2TG-75 */
+		.name		= "MT48LC8M16A2TG-75",
+		.rows		= 12,
+		.tck		= 8,
+		.trcd		= 20,
+		.trp		= 20,
+		.twr		= 8,
+		.refresh	= 64000,
+		.cas_latency	= 3,
 	},
 };
 
@@ -180,11 +185,13 @@ sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz,
 		sd->mdrefr |= MDREFR_K1DB2;
 
 	/* initial number of '1's in MDCAS + 1 */
-	set_mdcas(sd->mdcas, sd_khz >= 62000, ns_to_cycles(sdram->trcd, mem_khz));
+	set_mdcas(sd->mdcas, sd_khz >= 62000,
+		ns_to_cycles(sdram->trcd, mem_khz));
 
 #ifdef DEBUG
-	printk("MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n",
-		sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1], sd->mdcas[2]);
+	printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n",
+		sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1],
+		sd->mdcas[2]);
 #endif
 }
 
@@ -213,7 +220,7 @@ sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram)
 
 #ifdef DEBUG
 	mdelay(250);
-	printk("new dri value = %d\n", dri);
+	printk(KERN_DEBUG "new dri value = %d\n", dri);
 #endif
 
 	sdram_set_refresh(dri);
@@ -232,7 +239,7 @@ static int sa1110_target(struct cpufreq_policy *policy,
 	unsigned long flags;
 	unsigned int ppcr, unused;
 
-	switch(relation){
+	switch (relation) {
 	case CPUFREQ_RELATION_L:
 		ppcr = sa11x0_freq_to_ppcr(target_freq);
 		if (sa11x0_ppcr_to_freq(ppcr) > policy->max)
@@ -280,11 +287,10 @@ static int sa1110_target(struct cpufreq_policy *policy,
 	 * We wait 20ms to be safe.
 	 */
 	sdram_set_refresh(2);
-	if (!irqs_disabled()) {
+	if (!irqs_disabled())
 		msleep(20);
-	} else {
+	else
 		mdelay(20);
-	}
 
 	/*
 	 * Reprogram the DRAM timings with interrupts disabled, and
@@ -295,7 +301,7 @@ static int sa1110_target(struct cpufreq_policy *policy,
 	local_irq_save(flags);
 	asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
 	udelay(10);
-	__asm__ __volatile__("					\n\
+	__asm__ __volatile__("\n\
 		b	2f					\n\
 		.align	5					\n\
 1:		str	%3, [%1, #0]		@ MDCNFG	\n\
@@ -336,7 +342,9 @@ static int __init sa1110_cpu_init(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct cpufreq_driver sa1110_driver = {
+/* sa1110_driver needs __refdata because it must remain after init registers
+ * it with cpufreq_register_driver() */
+static struct cpufreq_driver sa1110_driver __refdata = {
 	.flags		= CPUFREQ_STICKY,
 	.verify		= sa11x0_verify_speed,
 	.target		= sa1110_target,
@@ -349,7 +357,8 @@ static struct sdram_params *sa1110_find_sdram(const char *name)
 {
 	struct sdram_params *sdram;
 
-	for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); sdram++)
+	for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl);
+	     sdram++)
 		if (strcmp(name, sdram->name) == 0)
 			return sdram;
 
@@ -369,14 +378,14 @@ static int __init sa1110_clk_init(void)
 	if (!name[0]) {
 		if (machine_is_assabet())
 			name = "TC59SM716-CL3";
-
 		if (machine_is_pt_system3())
 			name = "K4S641632D";
-
 		if (machine_is_h3100())
 			name = "KM416S4030CT";
 		if (machine_is_jornada720())
-		        name = "K4S281632B-1H";
+			name = "K4S281632B-1H";
+		if (machine_is_nanoengine())
+			name = "MT48LC8M16A2TG-75";
 	}
 
 	sdram = sa1110_find_sdram(name);
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 3c1fcd69671..59d14f0fdcf 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -16,9 +16,7 @@
 #include <linux/pm.h>
 #include <linux/cpufreq.h>
 #include <linux/ioport.h>
-#include <linux/sched.h>	/* just for sched_clock() - funny that */
 #include <linux/platform_device.h>
-#include <linux/cnt32_to_63.h>
 
 #include <asm/div64.h>
 #include <mach/hardware.h>
@@ -110,27 +108,6 @@ unsigned int sa11x0_getspeed(unsigned int cpu)
 }
 
 /*
- * This is the SA11x0 sched_clock implementation.  This has
- * a resolution of 271ns, and a maximum value of 32025597s (370 days).
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 582 seconds between successive
- * calls to this function.
- *
- *  ( * 1E9 / 3686400 => * 78125 / 288)
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long long v = cnt32_to_63(OSCR);
-
-	/* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
-	v *= 78125<<1;
-	do_div(v, 288<<1);
-
-	return v;
-}
-
-/*
  * Default power-off for SA1100
  */
 static void sa1100_power_off(void)
@@ -163,10 +140,15 @@ static void sa11x0_register_device(struct platform_device *dev, void *data)
 
 static struct resource sa11x0udc_resources[] = {
 	[0] = {
-		.start	= 0x80000000,
-		.end	= 0x8000ffff,
+		.start	= __PREG(Ser0UDCCR),
+		.end	= __PREG(Ser0UDCCR) + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
+	[1] = {
+		.start	= IRQ_Ser0UDC,
+		.end	= IRQ_Ser0UDC,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static u64 sa11x0udc_dma_mask = 0xffffffffUL;
@@ -184,10 +166,15 @@ static struct platform_device sa11x0udc_device = {
 
 static struct resource sa11x0uart1_resources[] = {
 	[0] = {
-		.start	= 0x80010000,
-		.end	= 0x8001ffff,
+		.start	= __PREG(Ser1UTCR0),
+		.end	= __PREG(Ser1UTCR0) + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
+	[1] = {
+		.start	= IRQ_Ser1UART,
+		.end	= IRQ_Ser1UART,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device sa11x0uart1_device = {
@@ -199,10 +186,15 @@ static struct platform_device sa11x0uart1_device = {
 
 static struct resource sa11x0uart3_resources[] = {
 	[0] = {
-		.start	= 0x80050000,
-		.end	= 0x8005ffff,
+		.start	= __PREG(Ser3UTCR0),
+		.end	= __PREG(Ser3UTCR0) + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
+	[1] = {
+		.start	= IRQ_Ser3UART,
+		.end	= IRQ_Ser3UART,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static struct platform_device sa11x0uart3_device = {
@@ -214,10 +206,15 @@ static struct platform_device sa11x0uart3_device = {
 
 static struct resource sa11x0mcp_resources[] = {
 	[0] = {
-		.start	= 0x80060000,
-		.end	= 0x8006ffff,
+		.start	= __PREG(Ser4MCCR0),
+		.end	= __PREG(Ser4MCCR0) + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
+	[1] = {
+		.start	= IRQ_Ser4MCP,
+		.end	= IRQ_Ser4MCP,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
@@ -244,6 +241,11 @@ static struct resource sa11x0ssp_resources[] = {
 		.end	= 0x8007ffff,
 		.flags	= IORESOURCE_MEM,
 	},
+	[1] = {
+		.start	= IRQ_Ser4SSP,
+		.end	= IRQ_Ser4SSP,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 static u64 sa11x0ssp_dma_mask = 0xffffffffUL;
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index 99f5856d8de..967ae768439 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -76,4 +76,12 @@ static inline unsigned long get_clock_tick_rate(void)
 #include "SA-1101.h"
 #endif
 
+#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_PCI)
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+#define pcibios_assign_all_busses()	1
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
+#endif
+
+
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-sa1100/include/mach/nanoengine.h b/arch/arm/mach-sa1100/include/mach/nanoengine.h
new file mode 100644
index 00000000000..14f8382d066
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/nanoengine.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/nanoengine.h
+ *
+ * This file contains the hardware specific definitions for nanoEngine.
+ * Only include this file from SA1100-specific files.
+ *
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_NANOENGINE_H
+#define __ASM_ARCH_NANOENGINE_H
+
+#include <mach/irqs.h>
+
+#define GPIO_PC_READY0	GPIO_GPIO(11) /* ready for socket 0 (active high)*/
+#define GPIO_PC_READY1	GPIO_GPIO(12) /* ready for socket 1 (active high) */
+#define GPIO_PC_CD0	GPIO_GPIO(13) /* detect for socket 0 (active low) */
+#define GPIO_PC_CD1	GPIO_GPIO(14) /* detect for socket 1 (active low) */
+#define GPIO_PC_RESET0	GPIO_GPIO(15) /* reset socket 0 */
+#define GPIO_PC_RESET1	GPIO_GPIO(16) /* reset socket 1 */
+
+#define NANOENGINE_IRQ_GPIO_PCI		IRQ_GPIO0
+#define NANOENGINE_IRQ_GPIO_PC_READY0	IRQ_GPIO11
+#define NANOENGINE_IRQ_GPIO_PC_READY1	IRQ_GPIO12
+#define NANOENGINE_IRQ_GPIO_PC_CD0	IRQ_GPIO13
+#define NANOENGINE_IRQ_GPIO_PC_CD1	IRQ_GPIO14
+
+/*
+ * nanoEngine Memory Map:
+ *
+ * 0000.0000 - 003F.0000 -   4 MB Flash
+ * C000.0000 - C1FF.FFFF -  32 MB SDRAM
+ * 1860.0000 - 186F.FFFF -   1 MB Internal PCI Memory Read/Write
+ * 18A1.0000 - 18A1.FFFF -  64 KB Internal PCI Config Space
+ * 4000.0000 - 47FF.FFFF - 128 MB External Bus I/O - Multiplexed Mode
+ * 4800.0000 - 4FFF.FFFF - 128 MB External Bus I/O - Non-Multiplexed Mode
+ *
+ */
+
+#define NANO_PCI_MEM_RW_PHYS		0x18600000
+#define NANO_PCI_MEM_RW_VIRT		0xf1000000
+#define NANO_PCI_MEM_RW_SIZE		SZ_1M
+#define NANO_PCI_CONFIG_SPACE_PHYS	0x18A10000
+#define NANO_PCI_CONFIG_SPACE_VIRT	0xf2000000
+#define NANO_PCI_CONFIG_SPACE_SIZE	SZ_64K
+
+#endif
+
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
new file mode 100644
index 00000000000..72087f0658b
--- /dev/null
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -0,0 +1,119 @@
+/*
+ * linux/arch/arm/mach-sa1100/nanoengine.c
+ *
+ * Bright Star Engineering's nanoEngine board init code.
+ *
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/root_dev.h>
+
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <mach/hardware.h>
+#include <mach/nanoengine.h>
+
+#include "generic.h"
+
+/* Flash bank 0 */
+static struct mtd_partition nanoengine_partitions[] = {
+	{
+		.name	= "nanoEngine boot firmware and parameter table",
+		.size		= 0x00010000,  /* 32K */
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel/initrd reserved",
+		.size		= 0x002f0000,
+		.offset		= 0x00010000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "experimental filesystem allocation",
+		.size		= 0x00100000,
+		.offset		= 0x00300000,
+		.mask_flags	= MTD_WRITEABLE,
+	}
+};
+
+static struct flash_platform_data nanoengine_flash_data = {
+	.map_name	= "jedec_probe",
+	.parts		= nanoengine_partitions,
+	.nr_parts	= ARRAY_SIZE(nanoengine_partitions),
+};
+
+static struct resource nanoengine_flash_resources[] = {
+	{
+		.start	= SA1100_CS0_PHYS,
+		.end	= SA1100_CS0_PHYS + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= SA1100_CS1_PHYS,
+		.end	= SA1100_CS1_PHYS + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct map_desc nanoengine_io_desc[] __initdata = {
+	{
+		/* System Registers */
+		.virtual	= 0xf0000000,
+		.pfn		= __phys_to_pfn(0x10000000),
+		.length		= 0x00100000,
+		.type		= MT_DEVICE
+	}, {
+		/* Internal PCI Memory Read/Write */
+		.virtual	= NANO_PCI_MEM_RW_VIRT,
+		.pfn		= __phys_to_pfn(NANO_PCI_MEM_RW_PHYS),
+		.length		= NANO_PCI_MEM_RW_SIZE,
+		.type		= MT_DEVICE
+	}, {
+		/* Internal PCI Config Space */
+		.virtual	= NANO_PCI_CONFIG_SPACE_VIRT,
+		.pfn		= __phys_to_pfn(NANO_PCI_CONFIG_SPACE_PHYS),
+		.length		= NANO_PCI_CONFIG_SPACE_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init nanoengine_map_io(void)
+{
+	sa1100_map_io();
+	iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc));
+
+	sa1100_register_uart(0, 1);
+	sa1100_register_uart(1, 2);
+	sa1100_register_uart(2, 3);
+	Ser1SDCR0 |= SDCR0_UART;
+	/* disable IRDA -- UART2 is used as a normal serial port */
+	Ser2UTCR4 = 0;
+	Ser2HSCR0 = 0;
+}
+
+static void __init nanoengine_init(void)
+{
+	sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources,
+		ARRAY_SIZE(nanoengine_flash_resources));
+}
+
+MACHINE_START(NANOENGINE, "BSE nanoEngine")
+	.boot_params	= 0xc0000000,
+	.map_io		= nanoengine_map_io,
+	.init_irq	= sa1100_init_irq,
+	.timer		= &sa1100_timer,
+	.init_machine	= nanoengine_init,
+MACHINE_END
diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c
new file mode 100644
index 00000000000..fba7a913f12
--- /dev/null
+++ b/arch/arm/mach-sa1100/pci-nanoengine.c
@@ -0,0 +1,284 @@
+/*
+ * linux/arch/arm/mach-sa1100/pci-nanoengine.c
+ *
+ * PCI functions for BSE nanoEngine PCI
+ *
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+#include <mach/nanoengine.h>
+
+static DEFINE_SPINLOCK(nano_lock);
+
+static int nanoengine_get_pci_address(struct pci_bus *bus,
+	unsigned int devfn, int where, unsigned long *address)
+{
+	int ret = PCIBIOS_DEVICE_NOT_FOUND;
+	unsigned int busnr = bus->number;
+
+	*address = NANO_PCI_CONFIG_SPACE_VIRT +
+		((bus->number << 16) | (devfn << 8) | (where & ~3));
+
+	ret = (busnr > 255 || devfn > 255 || where > 255) ?
+		PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+
+	return ret;
+}
+
+static int nanoengine_read_config(struct pci_bus *bus, unsigned int devfn, int where,
+	int size, u32 *val)
+{
+	int ret;
+	unsigned long address;
+	unsigned long flags;
+	u32 v;
+
+	/* nanoEngine PCI bridge does not return -1 for a non-existing
+	 * device. We must fake the answer. We know that the only valid
+	 * device is device zero at bus 0, which is the network chip. */
+	if (bus->number != 0 || (devfn >> 3) != 0) {
+		v = -1;
+		nanoengine_get_pci_address(bus, devfn, where, &address);
+		goto exit_function;
+	}
+
+	spin_lock_irqsave(&nano_lock, flags);
+
+	ret = nanoengine_get_pci_address(bus, devfn, where, &address);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return ret;
+	v = __raw_readl(address);
+
+	spin_unlock_irqrestore(&nano_lock, flags);
+
+	v >>= ((where & 3) * 8);
+	v &= (unsigned long)(-1) >> ((4 - size) * 8);
+
+exit_function:
+	*val = v;
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int nanoengine_write_config(struct pci_bus *bus, unsigned int devfn, int where,
+	int size, u32 val)
+{
+	int ret;
+	unsigned long address;
+	unsigned long flags;
+	unsigned shift;
+	u32 v;
+
+	shift = (where & 3) * 8;
+
+	spin_lock_irqsave(&nano_lock, flags);
+
+	ret = nanoengine_get_pci_address(bus, devfn, where, &address);
+	if (ret != PCIBIOS_SUCCESSFUL)
+		return ret;
+	v = __raw_readl(address);
+	switch (size) {
+	case 1:
+		v &= ~(0xFF << shift);
+		v |= val << shift;
+		break;
+	case 2:
+		v &= ~(0xFFFF << shift);
+		v |= val << shift;
+		break;
+	case 4:
+		v = val;
+		break;
+	}
+	__raw_writel(v, address);
+
+	spin_unlock_irqrestore(&nano_lock, flags);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_nano_ops = {
+	.read	= nanoengine_read_config,
+	.write	= nanoengine_write_config,
+};
+
+static int __init pci_nanoengine_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return NANOENGINE_IRQ_GPIO_PCI;
+}
+
+struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	return pci_scan_bus(sys->busnr, &pci_nano_ops, sys);
+}
+
+static struct resource pci_io_ports = {
+	.name	= "PCI IO",
+	.start	= 0x400,
+	.end	= 0x7FF,
+	.flags	= IORESOURCE_IO,
+};
+
+static struct resource pci_non_prefetchable_memory = {
+	.name	= "PCI non-prefetchable",
+	.start	= NANO_PCI_MEM_RW_PHYS,
+	/* nanoEngine documentation says there is a 1 Megabyte window here,
+	 * but PCI reports just 128 + 8 kbytes. */
+	.end	= NANO_PCI_MEM_RW_PHYS + NANO_PCI_MEM_RW_SIZE - 1,
+/*	.end	= NANO_PCI_MEM_RW_PHYS + SZ_128K + SZ_8K - 1,*/
+	.flags	= IORESOURCE_MEM,
+};
+
+/*
+ * nanoEngine PCI reports 1 Megabyte of prefetchable memory, but it
+ * overlaps with previously defined memory.
+ *
+ * Here is what happens:
+ *
+# dmesg
+...
+pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
+pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
+pci 0000:00:00.0: reg 14: [io  0x0000-0x003f]
+pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
+pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
+pci 0000:00:00.0: supports D1 D2
+pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
+pci 0000:00:00.0: PME# disabled
+PCI: bus0: Fast back to back transfers enabled
+pci 0000:00:00.0: BAR 6: can't assign mem pref (size 0x100000)
+pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
+pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
+pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
+pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
+pci 0000:00:00.0: BAR 1: assigned [io  0x0400-0x043f]
+pci 0000:00:00.0: BAR 1: set to [io  0x0400-0x043f] (PCI address [0x0-0x3f])
+ *
+ * On the other hand, if we do not request the prefetchable memory resource,
+ * linux will alloc it first and the two non-prefetchable memory areas that
+ * are our real interest will not be mapped. So we choose to map it to an
+ * unused area. It gets recognized as expansion ROM, but becomes disabled.
+ *
+ * Here is what happens then:
+ *
+# dmesg
+...
+pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
+pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
+pci 0000:00:00.0: reg 14: [io  0x0000-0x003f]
+pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
+pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
+pci 0000:00:00.0: supports D1 D2
+pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
+pci 0000:00:00.0: PME# disabled
+PCI: bus0: Fast back to back transfers enabled
+pci 0000:00:00.0: BAR 6: assigned [mem 0x78000000-0x780fffff pref]
+pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
+pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
+pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
+pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
+pci 0000:00:00.0: BAR 1: assigned [io  0x0400-0x043f]
+pci 0000:00:00.0: BAR 1: set to [io  0x0400-0x043f] (PCI address [0x0-0x3f])
+
+# lspci -vv -s 0000:00:00.0
+00:00.0 Class 0200: Device 8086:1209 (rev 09)
+        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
+        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx-
+        Latency: 0 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
+        Interrupt: pin A routed to IRQ 0
+        Region 0: Memory at 18620000 (32-bit, non-prefetchable) [size=4K]
+        Region 1: I/O ports at 0400 [size=64]
+        Region 2: [virtual] Memory at 18600000 (32-bit, non-prefetchable) [size=128K]
+        [virtual] Expansion ROM at 78000000 [disabled] [size=1M]
+        Capabilities: [dc] Power Management version 2
+                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
+                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
+        Kernel driver in use: e100
+        Kernel modules: e100
+ *
+ */
+static struct resource pci_prefetchable_memory = {
+	.name	= "PCI prefetchable",
+	.start	= 0x78000000,
+	.end	= 0x78000000 + NANO_PCI_MEM_RW_SIZE - 1,
+	.flags	= IORESOURCE_MEM  | IORESOURCE_PREFETCH,
+};
+
+static int __init pci_nanoengine_setup_resources(struct resource **resource)
+{
+	if (request_resource(&ioport_resource, &pci_io_ports)) {
+		printk(KERN_ERR "PCI: unable to allocate io port region\n");
+		return -EBUSY;
+	}
+	if (request_resource(&iomem_resource, &pci_non_prefetchable_memory)) {
+		release_resource(&pci_io_ports);
+		printk(KERN_ERR "PCI: unable to allocate non prefetchable\n");
+		return -EBUSY;
+	}
+	if (request_resource(&iomem_resource, &pci_prefetchable_memory)) {
+		release_resource(&pci_io_ports);
+		release_resource(&pci_non_prefetchable_memory);
+		printk(KERN_ERR "PCI: unable to allocate prefetchable\n");
+		return -EBUSY;
+	}
+	resource[0] = &pci_io_ports;
+	resource[1] = &pci_non_prefetchable_memory;
+	resource[2] = &pci_prefetchable_memory;
+
+	return 1;
+}
+
+int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys)
+{
+	int ret = 0;
+
+	if (nr == 0) {
+		sys->mem_offset = NANO_PCI_MEM_RW_PHYS;
+		sys->io_offset = 0x400;
+		ret = pci_nanoengine_setup_resources(sys->resource);
+		/* Enable alternate memory bus master mode, see
+		 * "Intel StrongARM SA1110 Developer's Manual",
+		 * section 10.8, "Alternate Memory Bus Master Mode". */
+		GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
+		GAFR |= GPIO_MBGNT | GPIO_MBREQ;
+		TUCR |= TUCR_MBGPIO;
+	}
+
+	return ret;
+}
+
+static struct hw_pci nanoengine_pci __initdata = {
+	.map_irq		= pci_nanoengine_map_irq,
+	.nr_controllers		= 1,
+	.scan			= pci_nanoengine_scan_bus,
+	.setup			= pci_nanoengine_setup,
+};
+
+static int __init nanoengine_pci_init(void)
+{
+	if (machine_is_nanoengine())
+		pci_common_init(&nanoengine_pci);
+	return 0;
+}
+
+subsys_initcall(nanoengine_pci_init);
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 27692d0ffbe..cfb76077bd2 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -166,9 +166,6 @@ static void __init simpad_map_io(void)
 	PCFR = 0;
 	PSDR = 0;
 
-	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
-			      ARRAY_SIZE(simpad_flash_resources));
-	sa11x0_register_mcp(&simpad_mcp_data);
 }
 
 static void simpad_power_off(void)
@@ -216,6 +213,10 @@ static int __init simpad_init(void)
 
 	pm_power_off = simpad_power_off;
 
+	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
+			      ARRAY_SIZE(simpad_flash_resources));
+	sa11x0_register_mcp(&simpad_mcp_data);
+
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	if(ret)
 		printk(KERN_WARNING "simpad: Unable to register mq200 framebuffer device");
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 74b6e0e570b..ae4f3d80416 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -12,12 +12,39 @@
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/sched.h>	/* just for sched_clock() - funny that */
 #include <linux/timex.h>
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
+#include <asm/sched_clock.h>
 #include <mach/hardware.h>
 
+/*
+ * This is the SA11x0 sched_clock implementation.
+ */
+static DEFINE_CLOCK_DATA(cd);
+
+/*
+ * Constants generated by clocks_calc_mult_shift(m, s, 3.6864MHz,
+ * NSEC_PER_SEC, 60).
+ * This gives a resolution of about 271ns and a wrap period of about 19min.
+ */
+#define SC_MULT		2275555556u
+#define SC_SHIFT	23
+
+unsigned long long notrace sched_clock(void)
+{
+	u32 cyc = OSCR;
+	return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
+}
+
+static void notrace sa1100_update_sched_clock(void)
+{
+	u32 cyc = OSCR;
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
+
 #define MIN_OSCR_DELTA 2
 
 static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id)
@@ -81,7 +108,6 @@ static struct clocksource cksrc_sa1100_oscr = {
 	.rating		= 200,
 	.read		= sa1100_read_oscr,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -97,6 +123,9 @@ static void __init sa1100_timer_init(void)
 	OIER = 0;		/* disable any timer interrupts */
 	OSSR = 0xf;		/* clear status on all timers */
 
+	init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32,
+			       3686400, SC_MULT, SC_SHIFT);
+
 	ckevt_sa1100_osmr0.mult =
 		div_sc(3686400, NSEC_PER_SEC, ckevt_sa1100_osmr0.shift);
 	ckevt_sa1100_osmr0.max_delta_ns =
@@ -105,12 +134,9 @@ static void __init sa1100_timer_init(void)
 		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1;
 	ckevt_sa1100_osmr0.cpumask = cpumask_of(0);
 
-	cksrc_sa1100_oscr.mult =
-		clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift);
-
 	setup_irq(IRQ_OST0, &sa1100_timer_irq);
 
-	clocksource_register(&cksrc_sa1100_oscr);
+	clocksource_register_hz(&cksrc_sa1100_oscr, CLOCK_TICK_RATE);
 	clockevents_register_device(&ckevt_sa1100_osmr0);
 }
 
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
index 8e845b6a7cb..b10df988526 100644
--- a/arch/arm/mach-shark/include/mach/vmalloc.h
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -1,4 +1,4 @@
 /*
  * arch/arm/mach-shark/include/mach/vmalloc.h
  */
-#define VMALLOC_END       0xd0000000
+#define VMALLOC_END       0xd0000000UL
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 51dcd59eda6..4d1b4c5c938 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -5,26 +5,27 @@ comment "SH-Mobile System Type"
 config ARCH_SH7367
 	bool "SH-Mobile G3 (SH7367)"
 	select CPU_V6
-	select HAVE_CLK
-	select COMMON_CLKDEV
 	select SH_CLK_CPG
-	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ARCH_SH7377
 	bool "SH-Mobile G4 (SH7377)"
 	select CPU_V7
-	select HAVE_CLK
-	select COMMON_CLKDEV
 	select SH_CLK_CPG
-	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ARCH_SH7372
 	bool "SH-Mobile AP4 (SH7372)"
 	select CPU_V7
-	select HAVE_CLK
-	select COMMON_CLKDEV
 	select SH_CLK_CPG
-	select GENERIC_CLOCKEVENTS
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+
+config ARCH_SH73A0
+	bool "SH-Mobile AG5 (R8A73A00)"
+	select CPU_V7
+	select SH_CLK_CPG
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_GIC
 
 comment "SH-Mobile Board Type"
 
@@ -57,6 +58,15 @@ config AP4EVB_WVGA
 
 endchoice
 
+config MACH_AG5EVM
+	bool "AG5EVM board"
+	depends on ARCH_SH73A0
+
+config MACH_MACKEREL
+	bool "mackerel board"
+	depends on ARCH_SH7372
+	select ARCH_REQUIRE_GPIOLIB
+
 comment "SH-Mobile System Configuration"
 
 menu "Memory configuration"
@@ -64,8 +74,8 @@ menu "Memory configuration"
 config MEMORY_START
 	hex "Physical memory start address"
 	default "0x50000000" if MACH_G3EVM
-	default "0x40000000" if MACH_G4EVM
-	default "0x40000000" if MACH_AP4EVB
+	default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
+				MACH_MACKEREL
 	default "0x00000000"
 	---help---
 	  Tweak this only when porting to a new machine which does not
@@ -76,7 +86,8 @@ config MEMORY_SIZE
 	hex "Physical memory size"
 	default "0x08000000" if MACH_G3EVM
 	default "0x08000000" if MACH_G4EVM
-	default "0x10000000" if MACH_AP4EVB
+	default "0x20000000" if MACH_AG5EVM
+	default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
 	default "0x04000000"
 	help
 	  This sets the default memory size assumed by your kernel. It can
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index ae416fe7daf..e2507f66f9d 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -9,14 +9,34 @@ obj-y				:= timer.o console.o clock.o pm_runtime.o
 obj-$(CONFIG_ARCH_SH7367)	+= setup-sh7367.o clock-sh7367.o intc-sh7367.o
 obj-$(CONFIG_ARCH_SH7377)	+= setup-sh7377.o clock-sh7377.o intc-sh7377.o
 obj-$(CONFIG_ARCH_SH7372)	+= setup-sh7372.o clock-sh7372.o intc-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0)	+= setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
+
+# SMP objects
+smp-y				:= platsmp.o headsmp.o
+smp-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
+smp-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
+smp-$(CONFIG_ARCH_SH73A0)	+= smp-sh73a0.o
 
 # Pinmux setup
-pfc-$(CONFIG_ARCH_SH7367)	:= pfc-sh7367.o
-pfc-$(CONFIG_ARCH_SH7377)	:= pfc-sh7377.o
-pfc-$(CONFIG_ARCH_SH7372)	:= pfc-sh7372.o
-obj-$(CONFIG_GENERIC_GPIO)	+= $(pfc-y)
+pfc-y				:=
+pfc-$(CONFIG_ARCH_SH7367)	+= pfc-sh7367.o
+pfc-$(CONFIG_ARCH_SH7377)	+= pfc-sh7377.o
+pfc-$(CONFIG_ARCH_SH7372)	+= pfc-sh7372.o
+pfc-$(CONFIG_ARCH_SH73A0)	+= pfc-sh73a0.o
+
+# IRQ objects
+obj-$(CONFIG_ARCH_SH7367)	+= entry-intc.o
+obj-$(CONFIG_ARCH_SH7377)	+= entry-intc.o
+obj-$(CONFIG_ARCH_SH7372)	+= entry-intc.o
+obj-$(CONFIG_ARCH_SH73A0)	+= entry-gic.o
 
 # Board objects
 obj-$(CONFIG_MACH_G3EVM)	+= board-g3evm.o
 obj-$(CONFIG_MACH_G4EVM)	+= board-g4evm.o
 obj-$(CONFIG_MACH_AP4EVB)	+= board-ap4evb.o
+obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
+obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
+
+# Framework support
+obj-$(CONFIG_SMP)		+= $(smp-y)
+obj-$(CONFIG_GENERIC_GPIO)	+= $(pfc-y)
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
new file mode 100644
index 00000000000..c18a740a415
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -0,0 +1,315 @@
+/*
+ * arch/arm/mach-shmobile/board-ag5evm.c
+ *
+ * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
+ * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_sci.h>
+#include <linux/smsc911x.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+
+#include <sound/sh_fsi.h>
+
+#include <mach/hardware.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/traps.h>
+
+static struct resource smsc9220_resources[] = {
+	[0] = {
+		.start		= 0x14000000,
+		.end		= 0x14000000 + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= gic_spi(33), /* PINT1 */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc9220_platdata = {
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device eth_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.dev  = {
+		.platform_data = &smsc9220_platdata,
+	},
+	.resource	= smsc9220_resources,
+	.num_resources	= ARRAY_SIZE(smsc9220_resources),
+};
+
+static struct sh_keysc_info keysc_platdata = {
+	.mode		= SH_KEYSC_MODE_6,
+	.scan_timing	= 3,
+	.delay		= 100,
+	.keycodes	= {
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
+		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
+		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
+		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
+		KEY_SPACE, KEY_9, KEY_6, KEY_3, KEY_WAKEUP, KEY_RIGHT, \
+		KEY_COFFEE,
+		KEY_0, KEY_8, KEY_5, KEY_2, KEY_DOWN, KEY_ENTER, KEY_UP,
+		KEY_KPASTERISK, KEY_7, KEY_4, KEY_1, KEY_STOP, KEY_LEFT, \
+		KEY_COMPUTER,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start	= 0xe61b0000,
+		.end	= 0xe61b0098 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(71),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name		= "sh_keysc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(keysc_resources),
+	.resource	= keysc_resources,
+	.dev		= {
+		.platform_data	= &keysc_platdata,
+	},
+};
+
+/* FSI A */
+static struct sh_fsi_platform_info fsi_info = {
+	.porta_flags = SH_FSI_OUT_SLAVE_MODE	|
+		       SH_FSI_IN_SLAVE_MODE	|
+		       SH_FSI_OFMT(I2S)		|
+		       SH_FSI_IFMT(I2S),
+};
+
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xEC230000,
+		.end	= 0xEC230400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gic_spi(146),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi2",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+	.dev	= {
+		.platform_data	= &fsi_info,
+	},
+};
+
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xe6bd0000,
+		.end	= 0xe6bd00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(141),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= gic_spi(140),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_platdata = {
+	.sup_pclk	= 0,
+	.ocr		= MMC_VDD_165_195,
+	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct platform_device mmc_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh_mmcif_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+static struct platform_device *ag5evm_devices[] __initdata = {
+	&eth_device,
+	&keysc_device,
+	&fsi_device,
+	&mmc_device,
+};
+
+static struct map_desc ag5evm_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init ag5evm_map_io(void)
+{
+	iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
+
+	/* setup early devices and console here as well */
+	sh73a0_add_early_devices();
+	shmobile_setup_console();
+}
+
+#define PINTC_ADDR	0xe6900000
+#define PINTER0A	(PINTC_ADDR + 0xa0)
+#define PINTCR0A	(PINTC_ADDR + 0xb0)
+
+void __init ag5evm_init_irq(void)
+{
+	sh73a0_init_irq();
+
+	/* setup PINT: enable PINTA2 as active low */
+	__raw_writel(__raw_readl(PINTER0A) | (1<<29), PINTER0A);
+	__raw_writew(__raw_readw(PINTCR0A) | (2<<10), PINTCR0A);
+}
+
+static void __init ag5evm_init(void)
+{
+	sh73a0_pinmux_init();
+
+	/* enable SCIFA2 */
+	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
+	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
+	gpio_request(GPIO_FN_SCIFA2_RTS1_, NULL);
+	gpio_request(GPIO_FN_SCIFA2_CTS1_, NULL);
+
+	/* enable KEYSC */
+	gpio_request(GPIO_FN_KEYIN0_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN1_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN2_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN3_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN4_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN5_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN6_PU, NULL);
+	gpio_request(GPIO_FN_KEYIN7_PU, NULL);
+	gpio_request(GPIO_FN_KEYOUT0, NULL);
+	gpio_request(GPIO_FN_KEYOUT1, NULL);
+	gpio_request(GPIO_FN_KEYOUT2, NULL);
+	gpio_request(GPIO_FN_KEYOUT3, NULL);
+	gpio_request(GPIO_FN_KEYOUT4, NULL);
+	gpio_request(GPIO_FN_KEYOUT5, NULL);
+	gpio_request(GPIO_FN_PORT59_KEYOUT6, NULL);
+	gpio_request(GPIO_FN_PORT58_KEYOUT7, NULL);
+	gpio_request(GPIO_FN_KEYOUT8, NULL);
+	gpio_request(GPIO_FN_PORT149_KEYOUT9, NULL);
+
+	/* enable I2C channel 2 and 3 */
+	gpio_request(GPIO_FN_PORT236_I2C_SDA2, NULL);
+	gpio_request(GPIO_FN_PORT237_I2C_SCL2, NULL);
+	gpio_request(GPIO_FN_PORT248_I2C_SCL3, NULL);
+	gpio_request(GPIO_FN_PORT249_I2C_SDA3, NULL);
+
+	/* enable MMCIF */
+	gpio_request(GPIO_FN_MMCCLK0, NULL);
+	gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
+	gpio_request(GPIO_FN_MMCD0_0, NULL);
+	gpio_request(GPIO_FN_MMCD0_1, NULL);
+	gpio_request(GPIO_FN_MMCD0_2, NULL);
+	gpio_request(GPIO_FN_MMCD0_3, NULL);
+	gpio_request(GPIO_FN_MMCD0_4, NULL);
+	gpio_request(GPIO_FN_MMCD0_5, NULL);
+	gpio_request(GPIO_FN_MMCD0_6, NULL);
+	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_PORT208, NULL); /* Reset */
+	gpio_direction_output(GPIO_PORT208, 1);
+
+	/* enable SMSC911X */
+	gpio_request(GPIO_PORT144, NULL); /* PINTA2 */
+	gpio_direction_input(GPIO_PORT144);
+	gpio_request(GPIO_PORT145, NULL); /* RESET */
+	gpio_direction_output(GPIO_PORT145, 1);
+
+	/* FSI A */
+	gpio_request(GPIO_FN_FSIACK, NULL);
+	gpio_request(GPIO_FN_FSIAILR, NULL);
+	gpio_request(GPIO_FN_FSIAIBT, NULL);
+	gpio_request(GPIO_FN_FSIAISLD, NULL);
+	gpio_request(GPIO_FN_FSIAOSLD, NULL);
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Shared attribute override enable, 64K*8way */
+	l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff);
+#endif
+	sh73a0_add_standard_devices();
+	platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
+}
+
+static void __init ag5evm_timer_init(void)
+{
+	sh73a0_clock_init();
+	shmobile_timer.init();
+	return;
+}
+
+struct sys_timer ag5evm_timer = {
+	.init	= ag5evm_timer_init,
+};
+
+MACHINE_START(AG5EVM, "ag5evm")
+	.map_io		= ag5evm_map_io,
+	.init_irq	= ag5evm_init_irq,
+	.handle_irq	= shmobile_handle_irq_gic,
+	.init_machine	= ag5evm_init,
+	.timer		= &ag5evm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 32d9e2816e5..cd79d7c1ba0 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -61,6 +61,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
+#include <asm/setup.h>
 
 /*
  * Address	Interface		BusWidth	note
@@ -163,11 +164,13 @@ static struct mtd_partition nor_flash_partitions[] = {
 		.name		= "loader",
 		.offset		= 0x00000000,
 		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
 	},
 	{
 		.name		= "bootenv",
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
 	},
 	{
 		.name		= "kernel_ro",
@@ -270,6 +273,15 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
+static struct sh_mmcif_dma sh_mmcif_dma = {
+	.chan_priv_rx	= {
+		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
+	},
+	.chan_priv_tx	= {
+		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
+	},
+};
+
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -277,6 +289,7 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
+	.dma		= &sh_mmcif_dma,
 };
 
 static struct platform_device sh_mmcif_device = {
@@ -499,7 +512,12 @@ static struct platform_device keysc_device = {
 static struct resource mipidsi0_resources[] = {
 	[0] = {
 		.start  = 0xffc60000,
-		.end    = 0xffc68fff,
+		.end    = 0xffc63073,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 0xffc68000,
+		.end    = 0xffc680ef,
 		.flags  = IORESOURCE_MEM,
 	},
 };
@@ -507,6 +525,7 @@ static struct resource mipidsi0_resources[] = {
 static struct sh_mipi_dsi_info mipidsi0_info = {
 	.data_format	= MIPI_RGB888,
 	.lcd_chan	= &lcdc_info.ch[0],
+	.vsynw_offset	= 17,
 };
 
 static struct platform_device mipidsi0_device = {
@@ -519,80 +538,138 @@ static struct platform_device mipidsi0_device = {
 	},
 };
 
-/* This function will disappear when we switch to (runtime) PM */
-static int __init ap4evb_init_display_clk(void)
+static struct platform_device *qhd_devices[] __initdata = {
+	&mipidsi0_device,
+	&keysc_device,
+};
+#endif /* CONFIG_AP4EVB_QHD */
+
+/* FSI */
+#define IRQ_FSI		evt2irq(0x1840)
+static int __fsi_set_rate(struct clk *clk, long rate, int enable)
 {
-	struct clk *lcdc_clk;
-	struct clk *dsitx_clk;
-	int ret;
+	int ret = 0;
 
-	lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0");
-	if (IS_ERR(lcdc_clk))
-		return PTR_ERR(lcdc_clk);
+	if (rate <= 0)
+		return ret;
 
-	dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0");
-	if (IS_ERR(dsitx_clk)) {
-		ret = PTR_ERR(dsitx_clk);
-		goto eclkdsitxget;
+	if (enable) {
+		ret = clk_set_rate(clk, rate);
+		if (0 == ret)
+			ret = clk_enable(clk);
+	} else {
+		clk_disable(clk);
 	}
 
-	ret = clk_enable(lcdc_clk);
-	if (ret < 0)
-		goto eclklcdcon;
+	return ret;
+}
 
-	ret = clk_enable(dsitx_clk);
-	if (ret < 0)
-		goto eclkdsitxon;
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+	return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable);
+}
 
-	return 0;
+static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable)
+{
+	struct clk *fsia_ick;
+	struct clk *fsiack;
+	int ret = -EIO;
 
-eclkdsitxon:
-	clk_disable(lcdc_clk);
-eclklcdcon:
-	clk_put(dsitx_clk);
-eclkdsitxget:
-	clk_put(lcdc_clk);
+	fsia_ick = clk_get(dev, "icka");
+	if (IS_ERR(fsia_ick))
+		return PTR_ERR(fsia_ick);
 
-	return ret;
-}
-device_initcall(ap4evb_init_display_clk);
+	/*
+	 * FSIACK is connected to AK4642,
+	 * and use external clock pin from it.
+	 * it is parent of fsia_ick now.
+	 */
+	fsiack = clk_get_parent(fsia_ick);
+	if (!fsiack)
+		goto fsia_ick_out;
 
-static struct platform_device *qhd_devices[] __initdata = {
-	&mipidsi0_device,
-	&keysc_device,
-};
-#endif /* CONFIG_AP4EVB_QHD */
+	/*
+	 * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick
+	 *
+	 ** FIXME **
+	 * Because the freq_table of external clk (fsiack) are all 0,
+	 * the return value of clk_round_rate became 0.
+	 * So, it use __fsi_set_rate here.
+	 */
+	ret = __fsi_set_rate(fsiack, rate, enable);
+	if (ret < 0)
+		goto fsiack_out;
 
-/* FSI */
-#define IRQ_FSI		evt2irq(0x1840)
+	ret = __fsi_set_round_rate(fsia_ick, rate, enable);
+	if ((ret < 0) && enable)
+		__fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */
+
+fsiack_out:
+	clk_put(fsiack);
+
+fsia_ick_out:
+	clk_put(fsia_ick);
 
-static int fsi_set_rate(int is_porta, int rate)
+	return 0;
+}
+
+static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
 {
 	struct clk *fsib_clk;
 	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	long fsib_rate = 0;
+	long fdiv_rate = 0;
+	int ackmd_bpfmd;
 	int ret;
 
-	/* set_rate is not needed if port A */
-	if (is_porta)
-		return 0;
-
-	fsib_clk = clk_get(NULL, "fsib_clk");
-	if (IS_ERR(fsib_clk))
-		return -EINVAL;
-
 	switch (rate) {
+	case 44100:
+		fsib_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		break;
 	case 48000:
-		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
-		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
-		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
+		fdiv_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
 		break;
 	default:
 		pr_err("unsupported rate in FSI2 port B\n");
-		ret = -EINVAL;
-		break;
+		return -EINVAL;
 	}
 
+	/* FSI B setting */
+	fsib_clk = clk_get(dev, "ickb");
+	if (IS_ERR(fsib_clk))
+		return -EIO;
+
+	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
+	if (ret < 0)
+		goto fsi_set_rate_end;
+
+	/* FSI DIV setting */
+	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+	if (ret < 0) {
+		/* disable FSI B */
+		if (enable)
+			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+		goto fsi_set_rate_end;
+	}
+
+	ret = ackmd_bpfmd;
+
+fsi_set_rate_end:
 	clk_put(fsib_clk);
+	return ret;
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+	int ret;
+
+	if (is_porta)
+		ret = fsi_ak4642_set_rate(dev, rate, enable);
+	else
+		ret = fsi_hdmi_set_rate(dev, rate, enable);
 
 	return ret;
 }
@@ -669,10 +746,15 @@ static struct platform_device lcdc1_device = {
 	},
 };
 
+static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
+				unsigned long *parent_freq);
+
+
 static struct sh_mobile_hdmi_info hdmi_info = {
 	.lcd_chan = &sh_mobile_lcdc1_info.ch[0],
 	.lcd_dev = &lcdc1_device.dev,
 	.flags = HDMI_SND_SRC_SPDIF,
+	.clk_optimize_parent = ap4evb_clk_optimize,
 };
 
 static struct resource hdmi_resources[] = {
@@ -699,6 +781,25 @@ static struct platform_device hdmi_device = {
 	},
 };
 
+static long ap4evb_clk_optimize(unsigned long target, unsigned long *best_freq,
+				unsigned long *parent_freq)
+{
+	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
+	long error;
+
+	if (IS_ERR(hdmi_ick)) {
+		int ret = PTR_ERR(hdmi_ick);
+		pr_err("Cannot get HDMI ICK: %d\n", ret);
+		return ret;
+	}
+
+	error = clk_round_parent(hdmi_ick, target, best_freq, parent_freq, 1, 64);
+
+	clk_put(hdmi_ick);
+
+	return error;
+}
+
 static struct gpio_led ap4evb_leds[] = {
 	{
 		.name			= "led4",
@@ -874,6 +975,11 @@ static int __init hdmi_init_pm_clock(void)
 		goto out;
 	}
 
+	ret = clk_enable(&sh7372_pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot enable pllc2 clock\n");
+		goto out;
+	}
 	pr_debug("PLLC2 set frequency %lu\n", rate);
 
 	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
@@ -890,23 +996,11 @@ out:
 
 device_initcall(hdmi_init_pm_clock);
 
-#define FSIACK_DUMMY_RATE 48000
 static int __init fsi_init_pm_clock(void)
 {
 	struct clk *fsia_ick;
 	int ret;
 
-	/*
-	 * FSIACK is connected to AK4642,
-	 * and the rate is depend on playing sound rate.
-	 * So, set dummy rate (= 48k) here
-	 */
-	ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE);
-	if (ret < 0) {
-		pr_err("Cannot set FSIACK dummy rate: %d\n", ret);
-		return ret;
-	}
-
 	fsia_ick = clk_get(&fsi_device.dev, "icka");
 	if (IS_ERR(fsia_ick)) {
 		ret = PTR_ERR(fsia_ick);
@@ -915,16 +1009,9 @@ static int __init fsi_init_pm_clock(void)
 	}
 
 	ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk);
-	if (ret < 0) {
-		pr_err("Cannot set FSI-A parent: %d\n", ret);
-		goto out;
-	}
-
-	ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE);
 	if (ret < 0)
-		pr_err("Cannot set FSI-A rate: %d\n", ret);
+		pr_err("Cannot set FSI-A parent: %d\n", ret);
 
-out:
 	clk_put(fsia_ick);
 
 	return ret;
@@ -1100,7 +1187,7 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_FN_OVCN2_1,    NULL);
 
 	/* setup USB phy */
-	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR2 */
+	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR4 */
 
 	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
@@ -1274,6 +1361,7 @@ static struct sys_timer ap4evb_timer = {
 MACHINE_START(AP4EVB, "ap4evb")
 	.map_io		= ap4evb_map_io,
 	.init_irq	= sh7372_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= ap4evb_init,
 	.timer		= &ap4evb_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index 3b83d6320be..686b304a770 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -367,6 +367,7 @@ static struct sys_timer g3evm_timer = {
 MACHINE_START(G3EVM, "g3evm")
 	.map_io		= g3evm_map_io,
 	.init_irq	= sh7367_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= g3evm_init,
 	.timer		= &g3evm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 5b3b582ef3f..c13f01280b7 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -394,6 +394,7 @@ static struct sys_timer g4evm_timer = {
 MACHINE_START(G4EVM, "g4evm")
 	.map_io		= g4evm_map_io,
 	.init_irq	= sh7377_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= g4evm_init,
 	.timer		= &g4evm_timer,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
new file mode 100644
index 00000000000..5bcf5c1e139
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -0,0 +1,1200 @@
+/*
+ * mackerel board support
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * based on ap4evb
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/smsc911x.h>
+#include <linux/sh_intc.h>
+#include <linux/tca6416_keypad.h>
+#include <linux/usb/r8a66597.h>
+
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
+#include <media/soc_camera_platform.h>
+#include <sound/sh_fsi.h>
+
+#include <mach/common.h>
+#include <mach/sh7372.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+
+/*
+ * Address	Interface		BusWidth	note
+ * ------------------------------------------------------------------
+ * 0x0000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = ON
+ * 0x0800_0000	user area		-
+ * 0x1000_0000	NOR Flash ROM (MCP)	16bit		SW7 : bit1 = OFF
+ * 0x1400_0000	Ether (LAN9220)		16bit
+ * 0x1600_0000	user area		-		cannot use with NAND
+ * 0x1800_0000	user area		-
+ * 0x1A00_0000	-
+ * 0x4000_0000	LPDDR2-SDRAM (POP)	32bit
+ */
+
+/*
+ * CPU mode
+ *
+ * SW4                                     | Boot Area| Master   | Remarks
+ *  1  | 2   | 3   | 4   | 5   | 6   | 8   |          | Processor|
+ * ----+-----+-----+-----+-----+-----+-----+----------+----------+--------------
+ * ON  | ON  | OFF | ON  | ON  | OFF | OFF | External | System   | External ROM
+ * ON  | ON  | ON  | ON  | ON  | OFF | OFF | External | System   | ROM Debug
+ * ON  | ON  | X   | ON  | OFF | OFF | OFF | Built-in | System   | ROM Debug
+ * X   | OFF | X   | X   | X   | X   | OFF | Built-in | System   | MaskROM
+ * OFF | X   | X   | X   | X   | X   | OFF | Built-in | System   | MaskROM
+ * X   | X   | X   | OFF | X   | X   | OFF | Built-in | System   | MaskROM
+ * OFF | ON  | OFF | X   | X   | OFF | ON  | External | System   | Standalone
+ * ON  | OFF | OFF | X   | X   | OFF | ON  | External | Realtime | Standalone
+*/
+
+/*
+ * NOR Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NOR Flash ROM
+ *  bit1 | bit1  bit2 | bit1 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    Area 0
+ *  OFF  | ON     OFF | OFF  |    Area 4
+ */
+
+/*
+ * SMSC 9220
+ *
+ *  SW1		SMSC 9220
+ * -----------------------
+ *  ON		access disable
+ *  OFF		access enable
+ */
+
+/*
+ * NAND Flash ROM
+ *
+ *  SW1  |     SW2    | SW7  | NAND Flash ROM
+ *  bit1 | bit1  bit2 | bit2 | Memory allocation
+ * ------+------------+------+------------------
+ *  OFF  | ON     OFF | ON   |    FCE 0
+ *  OFF  | ON     OFF | OFF  |    FCE 1
+ */
+
+/*
+ * External interrupt pin settings
+ *
+ * IRQX  | pin setting        | device             | level
+ * ------+--------------------+--------------------+-------
+ * IRQ0  | ICR1A.IRQ0SA=0010  | SDHI2 card detect  | Low
+ * IRQ6  | ICR1A.IRQ6SA=0011  | Ether(LAN9220)     | High
+ * IRQ7  | ICR1A.IRQ7SA=0010  | LCD Tuch Panel     | Low
+ * IRQ8  | ICR2A.IRQ8SA=0010  | MMC/SD card detect | Low
+ * IRQ9  | ICR2A.IRQ9SA=0010  | KEY(TCA6408)       | Low
+ * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345)    | High
+ * IRQ22 | ICR4A.IRQ22SA=0011 | Sensor(AK8975)     | High
+ */
+
+/*
+ * USB
+ *
+ * USB0 : CN22 : Function
+ * USB1 : CN31 : Function/Host *1
+ *
+ * J30 (for CN31) *1
+ * ----------+---------------+-------------
+ * 1-2 short | VBUS 5V       | Host
+ * open      | external VBUS | Function
+ *
+ * *1
+ * CN31 is used as Host in Linux.
+ */
+
+/*
+ * SDHI0 (CN12)
+ *
+ * SW56 : OFF
+ *
+ */
+
+/* MMC /SDHI1 (CN7)
+ *
+ * I/O voltage : 1.8v
+ *
+ * Power voltage : 1.8v or 3.3v
+ *  J22 : select power voltage *1
+ *	1-2 pin : 1.8v
+ *	2-3 pin : 3.3v
+ *
+ * *1
+ * Please change J22 depends the card to be used.
+ * MMC's OCR field set to support either voltage for the card inserted.
+ *
+ *	SW1	|	SW33
+ *		| bit1 | bit2 | bit3 | bit4
+ * -------------+------+------+------+-------
+ * MMC0	  OFF	|  OFF |  ON  |  ON  |  X
+ * MMC1	  ON	|  OFF |  ON  |  X   | ON
+ * SDHI1  OFF	|  ON  |   X  |  OFF | ON
+ *
+ */
+
+/*
+ * SDHI2 (CN23)
+ *
+ * microSD card sloct
+ *
+ */
+
+/*
+ * FIXME !!
+ *
+ * gpio_no_direction
+ * are quick_hack.
+ *
+ * current gpio frame work doesn't have
+ * the method to control only pull up/down/free.
+ * this function should be replaced by correct gpio function
+ */
+static void __init gpio_no_direction(u32 addr)
+{
+	__raw_writeb(0x00, addr);
+}
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel_ro",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 8 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x08000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+/* SMSC */
+static struct resource smc911x_resources[] = {
+	{
+		.start	= 0x14000000,
+		.end	= 0x16000000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= evt2irq(0x02c0) /* IRQ6A */,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smc911x_device = {
+	.name           = "smsc911x",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(smc911x_resources),
+	.resource       = smc911x_resources,
+	.dev            = {
+		.platform_data = &smsc911x_info,
+	},
+};
+
+/* LCDC */
+static struct fb_videomode mackerel_lcdc_modes[] = {
+	{
+		.name		= "WVGA Panel",
+		.xres		= 800,
+		.yres		= 480,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 70,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+		.sync		= 0,
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.lcd_cfg = mackerel_lcdc_modes,
+		.num_cfg = ARRAY_SIZE(mackerel_lcdc_modes),
+		.interface_type		= RGB24,
+		.clock_divider		= 2,
+		.flags			= 0,
+		.lcd_size_cfg.width	= 152,
+		.lcd_size_cfg.height	= 91,
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev	= {
+		.platform_data	= &lcdc_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* HDMI */
+static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB24,
+		.clock_divider = 1,
+		.flags = LCDC_FLAGS_DWPOL,
+	}
+};
+
+static struct resource hdmi_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC1",
+		.start	= 0xfe944000,
+		.end	= 0xfe947fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x1780),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device hdmi_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(hdmi_lcdc_resources),
+	.resource	= hdmi_lcdc_resources,
+	.id		= 1,
+	.dev	= {
+		.platform_data	= &hdmi_lcdc_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+static struct sh_mobile_hdmi_info hdmi_info = {
+	.lcd_chan	= &hdmi_lcdc_info.ch[0],
+	.lcd_dev	= &hdmi_lcdc_device.dev,
+	.flags		= HDMI_SND_SRC_SPDIF,
+};
+
+static struct resource hdmi_resources[] = {
+	[0] = {
+		.name	= "HDMI",
+		.start	= 0xe6be0000,
+		.end	= 0xe6be00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* There's also an HDMI interrupt on INTCS @ 0x18e0 */
+		.start	= evt2irq(0x17e0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device hdmi_device = {
+	.name		= "sh-mobile-hdmi",
+	.num_resources	= ARRAY_SIZE(hdmi_resources),
+	.resource	= hdmi_resources,
+	.id             = -1,
+	.dev	= {
+		.platform_data	= &hdmi_info,
+	},
+};
+
+static int __init hdmi_init_pm_clock(void)
+{
+	struct clk *hdmi_ick = clk_get(&hdmi_device.dev, "ick");
+	int ret;
+	long rate;
+
+	if (IS_ERR(hdmi_ick)) {
+		ret = PTR_ERR(hdmi_ick);
+		pr_err("Cannot get HDMI ICK: %d\n", ret);
+		goto out;
+	}
+
+	ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk);
+	if (ret < 0) {
+		pr_err("Cannot set PLLC2 parent: %d, %d users\n",
+		       ret, sh7372_pllc2_clk.usecount);
+		goto out;
+	}
+
+	pr_debug("PLLC2 initial frequency %lu\n",
+		 clk_get_rate(&sh7372_pllc2_clk));
+
+	rate = clk_round_rate(&sh7372_pllc2_clk, 594000000);
+	if (rate < 0) {
+		pr_err("Cannot get suitable rate: %ld\n", rate);
+		ret = rate;
+		goto out;
+	}
+
+	ret = clk_set_rate(&sh7372_pllc2_clk, rate);
+	if (ret < 0) {
+		pr_err("Cannot set rate %ld: %d\n", rate, ret);
+		goto out;
+	}
+
+	ret = clk_enable(&sh7372_pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot enable pllc2 clock\n");
+		goto out;
+	}
+
+	pr_debug("PLLC2 set frequency %lu\n", rate);
+
+	ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk);
+	if (ret < 0) {
+		pr_err("Cannot set HDMI parent: %d\n", ret);
+		goto out;
+	}
+
+out:
+	if (!IS_ERR(hdmi_ick))
+		clk_put(hdmi_ick);
+	return ret;
+}
+device_initcall(hdmi_init_pm_clock);
+
+/* USB1 (Host) */
+static void usb1_host_port_power(int port, int power)
+{
+	if (!power) /* only power-on is supported for now */
+		return;
+
+	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
+	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
+}
+
+static struct r8a66597_platdata usb1_host_data = {
+	.on_chip	= 1,
+	.port_power	= usb1_host_port_power,
+};
+
+static struct resource usb1_host_resources[] = {
+	[0] = {
+		.name	= "USBHS",
+		.start	= 0xE68B0000,
+		.end	= 0xE68B00E6 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb1_host_device = {
+	.name	= "r8a66597_hcd",
+	.id	= 1,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &usb1_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(usb1_host_resources),
+	.resource	= usb1_host_resources,
+};
+
+/* LED */
+static struct gpio_led mackerel_leds[] = {
+	{
+		.name		= "led0",
+		.gpio		= GPIO_PORT0,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "led1",
+		.gpio		= GPIO_PORT1,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "led2",
+		.gpio		= GPIO_PORT2,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	},
+	{
+		.name		= "led3",
+		.gpio		= GPIO_PORT159,
+		.default_state	= LEDS_GPIO_DEFSTATE_ON,
+	}
+};
+
+static struct gpio_led_platform_data mackerel_leds_pdata = {
+	.leds = mackerel_leds,
+	.num_leds = ARRAY_SIZE(mackerel_leds),
+};
+
+static struct platform_device leds_device = {
+	.name = "leds-gpio",
+	.id = 0,
+	.dev = {
+		.platform_data  = &mackerel_leds_pdata,
+	},
+};
+
+/* FSI */
+#define IRQ_FSI evt2irq(0x1840)
+static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
+{
+	int ret;
+
+	if (rate <= 0)
+		return 0;
+
+	if (!enable) {
+		clk_disable(clk);
+		return 0;
+	}
+
+	ret = clk_set_rate(clk, clk_round_rate(clk, rate));
+	if (ret < 0)
+		return ret;
+
+	return clk_enable(clk);
+}
+
+static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable)
+{
+	struct clk *fsib_clk;
+	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	long fsib_rate = 0;
+	long fdiv_rate = 0;
+	int ackmd_bpfmd;
+	int ret;
+
+	/* FSIA is slave mode. nothing to do here */
+	if (is_porta)
+		return 0;
+
+	/* clock start */
+	switch (rate) {
+	case 44100:
+		fsib_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		break;
+	case 48000:
+		fsib_rate	= 85428000; /* around 48kHz x 256 x 7 */
+		fdiv_rate	= rate * 256;
+		ackmd_bpfmd	= SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		break;
+	default:
+		pr_err("unsupported rate in FSI2 port B\n");
+		return -EINVAL;
+	}
+
+	/* FSI B setting */
+	fsib_clk = clk_get(dev, "ickb");
+	if (IS_ERR(fsib_clk))
+		return -EIO;
+
+	/* fsib */
+	ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable);
+	if (ret < 0)
+		goto fsi_set_rate_end;
+
+	/* FSI DIV */
+	ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable);
+	if (ret < 0) {
+		/* disable FSI B */
+		if (enable)
+			__fsi_set_round_rate(fsib_clk, fsib_rate, 0);
+		goto fsi_set_rate_end;
+	}
+
+	ret = ackmd_bpfmd;
+
+fsi_set_rate_end:
+	clk_put(fsib_clk);
+	return ret;
+}
+
+static struct sh_fsi_platform_info fsi_info = {
+	.porta_flags =	SH_FSI_BRS_INV		|
+			SH_FSI_OUT_SLAVE_MODE	|
+			SH_FSI_IN_SLAVE_MODE	|
+			SH_FSI_OFMT(PCM)	|
+			SH_FSI_IFMT(PCM),
+
+	.portb_flags =	SH_FSI_BRS_INV	|
+			SH_FSI_BRM_INV	|
+			SH_FSI_LRS_INV	|
+			SH_FSI_OFMT(SPDIF),
+
+	.set_rate = fsi_set_rate,
+};
+
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C0400 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_FSI,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi2",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+	.dev	= {
+		.platform_data	= &fsi_info,
+	},
+};
+
+static struct platform_device fsi_ak4643_device = {
+	.name		= "sh_fsi2_a_ak4643",
+};
+
+/*
+ * The card detect pin of the top SD/MMC slot (CN7) is active low and is
+ * connected to GPIO A22 of SH7372 (GPIO_PORT41).
+ */
+static int slot_cn7_get_cd(struct platform_device *pdev)
+{
+	if (gpio_is_valid(GPIO_PORT41))
+		return !gpio_get_value(GPIO_PORT41);
+	else
+		return -ENXIO;
+}
+
+/* SDHI0 */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start	= 0xe6850000,
+		.end	= 0xe68501ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x0e00) /* SDHI0 */,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi0_resources),
+	.resource	= sdhi0_resources,
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+#if !defined(CONFIG_MMC_SH_MMCIF)
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI1_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI1_RX,
+	.tmio_ocr_mask	= MMC_VDD_165_195,
+	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED |
+			  MMC_CAP_NEEDS_POLL,
+	.get_cd		= slot_cn7_get_cd,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start	= 0xe6860000,
+		.end	= 0xe68601ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x0e80),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi1_resources),
+	.resource	= sdhi1_resources,
+	.id		= 1,
+	.dev	= {
+		.platform_data	= &sdhi1_info,
+	},
+};
+#endif
+
+/* SDHI2 */
+static struct sh_mobile_sdhi_info sdhi2_info = {
+	.dma_slave_tx	= SHDMA_SLAVE_SDHI2_TX,
+	.dma_slave_rx	= SHDMA_SLAVE_SDHI2_RX,
+	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED |
+			  MMC_CAP_NEEDS_POLL,
+};
+
+static struct resource sdhi2_resources[] = {
+	[0] = {
+		.name	= "SDHI2",
+		.start	= 0xe6870000,
+		.end	= 0xe68701ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x1200),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi2_device = {
+	.name	= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi2_resources),
+	.resource	= sdhi2_resources,
+	.id		= 2,
+	.dev	= {
+		.platform_data	= &sdhi2_info,
+	},
+};
+
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xE6BD0000,
+		.end	= 0xE6BD00FF,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC ERR */
+		.start	= evt2irq(0x1ac0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC NOR */
+		.start	= evt2irq(0x1ae0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0,
+	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NEEDS_POLL,
+	.get_cd		= slot_cn7_get_cd,
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+
+static int mackerel_camera_add(struct soc_camera_link *icl, struct device *dev);
+static void mackerel_camera_del(struct soc_camera_link *icl);
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	return 0; /* camera sensor always enabled */
+}
+
+static struct soc_camera_platform_info camera_info = {
+	.format_name = "UYVY",
+	.format_depth = 16,
+	.format = {
+		.code = V4L2_MBUS_FMT_UYVY8_2X8,
+		.colorspace = V4L2_COLORSPACE_SMPTE170M,
+		.field = V4L2_FIELD_NONE,
+		.width = 640,
+		.height = 480,
+	},
+	.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8 |
+	SOCAM_DATA_ACTIVE_HIGH,
+	.set_capture = camera_set_capture,
+};
+
+static struct soc_camera_link camera_link = {
+	.bus_id		= 0,
+	.add_device	= mackerel_camera_add,
+	.del_device	= mackerel_camera_del,
+	.module_name	= "soc_camera_platform",
+	.priv		= &camera_info,
+};
+
+static void dummy_release(struct device *dev)
+{
+}
+
+static struct platform_device camera_device = {
+	.name		= "soc_camera_platform",
+	.dev		= {
+		.platform_data	= &camera_info,
+		.release	= dummy_release,
+	},
+};
+
+static int mackerel_camera_add(struct soc_camera_link *icl,
+			       struct device *dev)
+{
+	if (icl != &camera_link)
+		return -ENODEV;
+
+	camera_info.dev = dev;
+
+	return platform_device_register(&camera_device);
+}
+
+static void mackerel_camera_del(struct soc_camera_link *icl)
+{
+	if (icl != &camera_link)
+		return;
+
+	platform_device_unregister(&camera_device);
+	memset(&camera_device.dev.kobj, 0,
+	       sizeof(camera_device.dev.kobj));
+}
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = intcs_evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.id             = 0, /* "ceu0" clock */
+	.num_resources	= ARRAY_SIZE(ceu_resources),
+	.resource	= ceu_resources,
+	.dev		= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct platform_device mackerel_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &camera_link,
+	},
+};
+
+static struct platform_device *mackerel_devices[] __initdata = {
+	&nor_flash_device,
+	&smc911x_device,
+	&lcdc_device,
+	&usb1_host_device,
+	&leds_device,
+	&fsi_device,
+	&fsi_ak4643_device,
+	&sdhi0_device,
+#if !defined(CONFIG_MMC_SH_MMCIF)
+	&sdhi1_device,
+#endif
+	&sdhi2_device,
+	&sh_mmcif_device,
+	&ceu_device,
+	&mackerel_camera,
+	&hdmi_lcdc_device,
+	&hdmi_device,
+};
+
+/* Keypad Initialization */
+#define KEYPAD_BUTTON(ev_type, ev_code, act_low) \
+{								\
+	.type		= ev_type,				\
+	.code		= ev_code,				\
+	.active_low	= act_low,				\
+}
+
+#define KEYPAD_BUTTON_LOW(event_code) KEYPAD_BUTTON(EV_KEY, event_code, 1)
+
+static struct tca6416_button mackerel_gpio_keys[] = {
+	KEYPAD_BUTTON_LOW(KEY_HOME),
+	KEYPAD_BUTTON_LOW(KEY_MENU),
+	KEYPAD_BUTTON_LOW(KEY_BACK),
+	KEYPAD_BUTTON_LOW(KEY_POWER),
+};
+
+static struct tca6416_keys_platform_data mackerel_tca6416_keys_info = {
+	.buttons	= mackerel_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(mackerel_gpio_keys),
+	.rep		= 1,
+	.use_polling	= 0,
+	.pinmask	= 0x000F,
+};
+
+/* I2C */
+#define IRQ9 evt2irq(0x0320)
+
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4643", 0x13),
+	},
+	/* Keypad */
+	{
+		I2C_BOARD_INFO("tca6408-keys", 0x20),
+		.platform_data = &mackerel_tca6416_keys_info,
+		.irq = IRQ9,
+	},
+};
+
+#define IRQ21 evt2irq(0x32a0)
+
+static struct i2c_board_info i2c1_devices[] = {
+	/* Accelerometer */
+	{
+		I2C_BOARD_INFO("adxl34x", 0x53),
+		.irq = IRQ21,
+	},
+};
+
+static struct map_desc mackerel_io_desc[] __initdata = {
+	/* create a 1:1 entity map for 0xe6xxxxxx
+	 * used by CPGA, INTC and PFC.
+	 */
+	{
+		.virtual	= 0xe6000000,
+		.pfn		= __phys_to_pfn(0xe6000000),
+		.length		= 256 << 20,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+static void __init mackerel_map_io(void)
+{
+	iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
+
+	/* setup early devices and console here as well */
+	sh7372_add_early_devices();
+	shmobile_setup_console();
+}
+
+#define GPIO_PORT9CR	0xE6051009
+#define GPIO_PORT10CR	0xE605100A
+#define SRCR4		0xe61580bc
+#define USCCR1		0xE6058144
+static void __init mackerel_init(void)
+{
+	u32 srcr4;
+	struct clk *clk;
+
+	sh7372_pinmux_init();
+
+	/* enable SCIFA0 */
+	gpio_request(GPIO_FN_SCIFA0_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA0_RXD, NULL);
+
+	/* enable SMSC911X */
+	gpio_request(GPIO_FN_CS5A,	NULL);
+	gpio_request(GPIO_FN_IRQ6_39,	NULL);
+
+	/* LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+
+	gpio_request(GPIO_PORT31, NULL); /* backlight */
+	gpio_direction_output(GPIO_PORT31, 1);
+
+	gpio_request(GPIO_PORT151, NULL); /* LCDDON */
+	gpio_direction_output(GPIO_PORT151, 1);
+
+	/* USB enable */
+	gpio_request(GPIO_FN_VBUS0_1,    NULL);
+	gpio_request(GPIO_FN_IDIN_1_18,  NULL);
+	gpio_request(GPIO_FN_PWEN_1_115, NULL);
+	gpio_request(GPIO_FN_OVCN_1_114, NULL);
+	gpio_request(GPIO_FN_EXTLP_1,    NULL);
+	gpio_request(GPIO_FN_OVCN2_1,    NULL);
+
+	/* setup USB phy */
+	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR4 */
+
+	/* enable FSI2 port A (ak4643) */
+	gpio_request(GPIO_FN_FSIAIBT,	NULL);
+	gpio_request(GPIO_FN_FSIAILR,	NULL);
+	gpio_request(GPIO_FN_FSIAISLD,	NULL);
+	gpio_request(GPIO_FN_FSIAOSLD,	NULL);
+	gpio_request(GPIO_PORT161,	NULL);
+	gpio_direction_output(GPIO_PORT161, 0); /* slave */
+
+	gpio_request(GPIO_PORT9,  NULL);
+	gpio_request(GPIO_PORT10, NULL);
+	gpio_no_direction(GPIO_PORT9CR);  /* FSIAOBT needs no direction */
+	gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */
+
+	intc_set_priority(IRQ_FSI, 3); /* irq priority FSI(3) > SMSC911X(2) */
+
+	/* setup FSI2 port B (HDMI) */
+	gpio_request(GPIO_FN_FSIBCK, NULL);
+	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
+
+	/* set SPU2 clock to 119.6 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 119600000));
+		clk_put(clk);
+	}
+
+	/* enable Keypad */
+	gpio_request(GPIO_FN_IRQ9_42,	NULL);
+	set_irq_type(IRQ9, IRQ_TYPE_LEVEL_HIGH);
+
+	/* enable Accelerometer */
+	gpio_request(GPIO_FN_IRQ21,	NULL);
+	set_irq_type(IRQ21, IRQ_TYPE_LEVEL_HIGH);
+
+	/* enable SDHI0 */
+	gpio_request(GPIO_FN_SDHICD0, NULL);
+	gpio_request(GPIO_FN_SDHIWP0, NULL);
+	gpio_request(GPIO_FN_SDHICMD0, NULL);
+	gpio_request(GPIO_FN_SDHICLK0, NULL);
+	gpio_request(GPIO_FN_SDHID0_3, NULL);
+	gpio_request(GPIO_FN_SDHID0_2, NULL);
+	gpio_request(GPIO_FN_SDHID0_1, NULL);
+	gpio_request(GPIO_FN_SDHID0_0, NULL);
+
+#if !defined(CONFIG_MMC_SH_MMCIF)
+	/* enable SDHI1 */
+	gpio_request(GPIO_FN_SDHICMD1, NULL);
+	gpio_request(GPIO_FN_SDHICLK1, NULL);
+	gpio_request(GPIO_FN_SDHID1_3, NULL);
+	gpio_request(GPIO_FN_SDHID1_2, NULL);
+	gpio_request(GPIO_FN_SDHID1_1, NULL);
+	gpio_request(GPIO_FN_SDHID1_0, NULL);
+#endif
+	/* card detect pin for MMC slot (CN7) */
+	gpio_request(GPIO_PORT41, NULL);
+	gpio_direction_input(GPIO_PORT41);
+
+	/* enable SDHI2 */
+	gpio_request(GPIO_FN_SDHICMD2, NULL);
+	gpio_request(GPIO_FN_SDHICLK2, NULL);
+	gpio_request(GPIO_FN_SDHID2_3, NULL);
+	gpio_request(GPIO_FN_SDHID2_2, NULL);
+	gpio_request(GPIO_FN_SDHID2_1, NULL);
+	gpio_request(GPIO_FN_SDHID2_0, NULL);
+
+	/* MMCIF */
+	gpio_request(GPIO_FN_MMCD0_0, NULL);
+	gpio_request(GPIO_FN_MMCD0_1, NULL);
+	gpio_request(GPIO_FN_MMCD0_2, NULL);
+	gpio_request(GPIO_FN_MMCD0_3, NULL);
+	gpio_request(GPIO_FN_MMCD0_4, NULL);
+	gpio_request(GPIO_FN_MMCD0_5, NULL);
+	gpio_request(GPIO_FN_MMCD0_6, NULL);
+	gpio_request(GPIO_FN_MMCD0_7, NULL);
+	gpio_request(GPIO_FN_MMCCMD0, NULL);
+	gpio_request(GPIO_FN_MMCCLK0, NULL);
+
+	/* enable GPS module (GT-720F) */
+	gpio_request(GPIO_FN_SCIFA2_TXD1, NULL);
+	gpio_request(GPIO_FN_SCIFA2_RXD1, NULL);
+
+	/* CEU */
+	gpio_request(GPIO_FN_VIO_CLK, NULL);
+	gpio_request(GPIO_FN_VIO_VD, NULL);
+	gpio_request(GPIO_FN_VIO_HD, NULL);
+	gpio_request(GPIO_FN_VIO_FIELD, NULL);
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO_D7, NULL);
+	gpio_request(GPIO_FN_VIO_D6, NULL);
+	gpio_request(GPIO_FN_VIO_D5, NULL);
+	gpio_request(GPIO_FN_VIO_D4, NULL);
+	gpio_request(GPIO_FN_VIO_D3, NULL);
+	gpio_request(GPIO_FN_VIO_D2, NULL);
+	gpio_request(GPIO_FN_VIO_D1, NULL);
+	gpio_request(GPIO_FN_VIO_D0, NULL);
+
+	/* HDMI */
+	gpio_request(GPIO_FN_HDMI_HPD, NULL);
+	gpio_request(GPIO_FN_HDMI_CEC, NULL);
+
+	/* Reset HDMI, must be held at least one EXTALR (32768Hz) period */
+	srcr4 = __raw_readl(SRCR4);
+	__raw_writel(srcr4 | (1 << 13), SRCR4);
+	udelay(50);
+	__raw_writel(srcr4 & ~(1 << 13), SRCR4);
+
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+	i2c_register_board_info(1, i2c1_devices,
+				ARRAY_SIZE(i2c1_devices));
+
+	sh7372_add_standard_devices();
+
+	platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices));
+}
+
+static void __init mackerel_timer_init(void)
+{
+	sh7372_clock_init();
+	shmobile_timer.init();
+
+	/* External clock source */
+	clk_set_rate(&sh7372_dv_clki_clk, 27000000);
+}
+
+static struct sys_timer mackerel_timer = {
+	.init		= mackerel_timer_init,
+};
+
+MACHINE_START(MACKEREL, "mackerel")
+	.map_io		= mackerel_map_io,
+	.init_irq	= sh7372_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
+	.init_machine	= mackerel_init,
+	.timer		= &mackerel_timer,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c
index 9f78729098f..6b186aefcbd 100644
--- a/arch/arm/mach-shmobile/clock-sh7367.c
+++ b/arch/arm/mach-shmobile/clock-sh7367.c
@@ -20,8 +20,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/sh_clk.h>
+#include <linux/clkdev.h>
 #include <mach/common.h>
-#include <asm/clkdev.h>
 
 /* SH7367 registers */
 #define RTFRQCR    0xe6150000
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 7db31e6c6bf..9aa8d68d1a9 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -20,8 +20,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/sh_clk.h>
+#include <linux/clkdev.h>
 #include <mach/common.h>
-#include <asm/clkdev.h>
 
 /* SH7372 registers */
 #define FRQCRA		0xe6150000
@@ -220,8 +220,7 @@ static void pllc2_disable(struct clk *clk)
 	__raw_writel(__raw_readl(PLLC2CR) & ~0x80000000, PLLC2CR);
 }
 
-static int pllc2_set_rate(struct clk *clk,
-			  unsigned long rate, int algo_id)
+static int pllc2_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long value;
 	int idx;
@@ -230,21 +229,13 @@ static int pllc2_set_rate(struct clk *clk,
 	if (idx < 0)
 		return idx;
 
-	if (rate == clk->parent->rate) {
-		pllc2_disable(clk);
-		return 0;
-	}
+	if (rate == clk->parent->rate)
+		return -EINVAL;
 
 	value = __raw_readl(PLLC2CR) & ~(0x3f << 24);
 
-	if (value & 0x80000000)
-		pllc2_disable(clk);
-
 	__raw_writel((value & ~0x80000000) | ((idx + 19) << 24), PLLC2CR);
 
-	if (value & 0x80000000)
-		return pllc2_enable(clk);
-
 	return 0;
 }
 
@@ -453,32 +444,24 @@ static int fsidiv_enable(struct clk *clk)
 	unsigned long value;
 
 	value  = __raw_readl(clk->mapping->base) >> 16;
-	if (value < 2) {
-		fsidiv_disable(clk);
-		return -ENOENT;
-	}
+	if (value < 2)
+		return -EIO;
 
 	__raw_writel((value << 16) | 0x3, clk->mapping->base);
 
 	return 0;
 }
 
-static int fsidiv_set_rate(struct clk *clk,
-			   unsigned long rate, int algo_id)
+static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 {
 	int idx;
 
-	if (clk->parent->rate == rate) {
-		fsidiv_disable(clk);
-		return 0;
-	}
-
 	idx = (clk->parent->rate / rate) & 0xffff;
 	if (idx < 2)
-		return -ENOENT;
+		return -EINVAL;
 
 	__raw_writel(idx << 16, clk->mapping->base);
-	return fsidiv_enable(clk);
+	return 0;
 }
 
 static struct clk_ops fsidiv_clk_ops = {
@@ -524,7 +507,7 @@ enum { MSTP001,
        MSTP223,
        MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
        MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
-       MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403,
+       MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403,
        MSTP_NR };
 
 #define MSTP(_parent, _reg, _bit, _flags) \
@@ -560,6 +543,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP314] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP313] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMC */
+	[MSTP423] = MSTP(&div4_clks[DIV4_B], SMSTPCR4, 23, 0), /* DSITX1 */
 	[MSTP415] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 15, 0), /* SDHI2 */
 	[MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */
 	[MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */
@@ -609,15 +593,14 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]),
 	CLKDEV_CON_ID("fmsi_clk", &div6_clks[DIV6_FMSI]),
 	CLKDEV_CON_ID("fmso_clk", &div6_clks[DIV6_FMSO]),
-	CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FSIA]),
-	CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FSIB]),
 	CLKDEV_CON_ID("sub_clk", &div6_clks[DIV6_SUB]),
 	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_SPU]),
 	CLKDEV_CON_ID("vou_clk", &div6_clks[DIV6_VOU]),
 	CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]),
-	CLKDEV_CON_ID("dsit_clk", &div6_clks[DIV6_DSIT]),
-	CLKDEV_CON_ID("dsi0p_clk", &div6_clks[DIV6_DSI0P]),
-	CLKDEV_CON_ID("dsi1p_clk", &div6_clks[DIV6_DSI1P]),
+	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]),
+	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
+	CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
+	CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
@@ -629,7 +612,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-mobile-csi2.0", &mstp_clks[MSTP126]), /* CSI2 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
-	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX */
+	CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */
@@ -647,11 +630,12 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
-	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP323]), /* USB0 */
-	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP323]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
+	CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */
+	CLKDEV_DEV_ID("sh-mipi-dsi.1", &mstp_clks[MSTP423]), /* DSITX1 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), /* SDHI2 */
 	CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c
index f91395aeb9a..95942466e63 100644
--- a/arch/arm/mach-shmobile/clock-sh7377.c
+++ b/arch/arm/mach-shmobile/clock-sh7377.c
@@ -20,8 +20,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/sh_clk.h>
+#include <linux/clkdev.h>
 #include <mach/common.h>
-#include <asm/clkdev.h>
 
 /* SH7377 registers */
 #define RTFRQCR    0xe6150000
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
new file mode 100644
index 00000000000..720a71433be
--- /dev/null
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -0,0 +1,356 @@
+/*
+ * sh73a0 clock framework support
+ *
+ * Copyright (C) 2010 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/sh_clk.h>
+#include <linux/clkdev.h>
+#include <mach/common.h>
+
+#define FRQCRA		0xe6150000
+#define FRQCRB		0xe6150004
+#define FRQCRD		0xe61500e4
+#define VCLKCR1		0xe6150008
+#define VCLKCR2		0xe615000C
+#define VCLKCR3		0xe615001C
+#define ZBCKCR		0xe6150010
+#define FLCKCR		0xe6150014
+#define SD0CKCR		0xe6150074
+#define SD1CKCR		0xe6150078
+#define SD2CKCR		0xe615007C
+#define FSIACKCR	0xe6150018
+#define FSIBCKCR	0xe6150090
+#define SUBCKCR		0xe6150080
+#define SPUACKCR	0xe6150084
+#define SPUVCKCR	0xe6150094
+#define MSUCKCR		0xe6150088
+#define HSICKCR		0xe615008C
+#define MFCK1CR		0xe6150098
+#define MFCK2CR		0xe615009C
+#define DSITCKCR	0xe6150060
+#define DSI0PCKCR	0xe6150064
+#define DSI1PCKCR	0xe6150068
+#define DSI0PHYCR	0xe615006C
+#define DSI1PHYCR	0xe6150070
+#define PLLECR		0xe61500d0
+#define PLL0CR		0xe61500d8
+#define PLL1CR		0xe6150028
+#define PLL2CR		0xe615002c
+#define PLL3CR		0xe61500dc
+#define SMSTPCR0	0xe6150130
+#define SMSTPCR1	0xe6150134
+#define SMSTPCR2	0xe6150138
+#define SMSTPCR3	0xe615013c
+#define SMSTPCR4	0xe6150140
+#define SMSTPCR5	0xe6150144
+#define CKSCR		0xe61500c0
+
+/* Fixed 32 KHz root clock from EXTALR pin */
+static struct clk r_clk = {
+	.rate           = 32768,
+};
+
+/*
+ * 26MHz default rate for the EXTAL1 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh73a0_extal1_clk = {
+	.rate		= 26000000,
+};
+
+/*
+ * 48MHz default rate for the EXTAL2 root input clock.
+ * If needed, reset this with clk_set_rate() from the platform code.
+ */
+struct clk sh73a0_extal2_clk = {
+	.rate		= 48000000,
+};
+
+/* A fixed divide-by-2 block */
+static unsigned long div2_recalc(struct clk *clk)
+{
+	return clk->parent->rate / 2;
+}
+
+static struct clk_ops div2_clk_ops = {
+	.recalc		= div2_recalc,
+};
+
+/* Divide extal1 by two */
+static struct clk extal1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh73a0_extal1_clk,
+};
+
+/* Divide extal2 by two */
+static struct clk extal2_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &sh73a0_extal2_clk,
+};
+
+static struct clk_ops main_clk_ops = {
+	.recalc		= followparent_recalc,
+};
+
+/* Main clock */
+static struct clk main_clk = {
+	.ops		= &main_clk_ops,
+};
+
+/* PLL0, PLL1, PLL2, PLL3 */
+static unsigned long pll_recalc(struct clk *clk)
+{
+	unsigned long mult = 1;
+
+	if (__raw_readl(PLLECR) & (1 << clk->enable_bit))
+		mult = (((__raw_readl(clk->enable_reg) >> 24) & 0x3f) + 1);
+
+	return clk->parent->rate * mult;
+}
+
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
+};
+
+static struct clk pll0_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &main_clk,
+	.enable_reg	= (void __iomem *)PLL0CR,
+	.enable_bit	= 0,
+};
+
+static struct clk pll1_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &main_clk,
+	.enable_reg	= (void __iomem *)PLL1CR,
+	.enable_bit	= 1,
+};
+
+static struct clk pll2_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &main_clk,
+	.enable_reg	= (void __iomem *)PLL2CR,
+	.enable_bit	= 2,
+};
+
+static struct clk pll3_clk = {
+	.ops		= &pll_clk_ops,
+	.flags		= CLK_ENABLE_ON_INIT,
+	.parent		= &main_clk,
+	.enable_reg	= (void __iomem *)PLL3CR,
+	.enable_bit	= 3,
+};
+
+/* Divide PLL1 by two */
+static struct clk pll1_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &pll1_clk,
+};
+
+static struct clk *main_clks[] = {
+	&r_clk,
+	&sh73a0_extal1_clk,
+	&sh73a0_extal2_clk,
+	&extal1_div2_clk,
+	&extal2_div2_clk,
+	&main_clk,
+	&pll0_clk,
+	&pll1_clk,
+	&pll2_clk,
+	&pll3_clk,
+	&pll1_div2_clk,
+};
+
+static void div4_kick(struct clk *clk)
+{
+	unsigned long value;
+
+	/* set KICK bit in FRQCRB to update hardware setting */
+	value = __raw_readl(FRQCRB);
+	value |= (1 << 31);
+	__raw_writel(value, FRQCRB);
+}
+
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18,
+			  24, 0, 36, 48, 7 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = divisors,
+	.nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
+	.kick = div4_kick,
+};
+
+enum { DIV4_I, DIV4_ZG, DIV4_M3, DIV4_B, DIV4_M1, DIV4_M2,
+	DIV4_Z, DIV4_ZTR, DIV4_ZT, DIV4_ZX, DIV4_HP, DIV4_NR };
+
+#define DIV4(_reg, _bit, _mask, _flags) \
+	SH_CLK_DIV4(&pll1_clk, _reg, _bit, _mask, _flags)
+
+static struct clk div4_clks[DIV4_NR] = {
+	[DIV4_I] = DIV4(FRQCRA, 20, 0xfff, CLK_ENABLE_ON_INIT),
+	[DIV4_ZG] = DIV4(FRQCRA, 16, 0xbff, CLK_ENABLE_ON_INIT),
+	[DIV4_M3] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(FRQCRA, 8, 0xfff, CLK_ENABLE_ON_INIT),
+	[DIV4_M1] = DIV4(FRQCRA, 4, 0xfff, 0),
+	[DIV4_M2] = DIV4(FRQCRA, 0, 0xfff, 0),
+	[DIV4_Z] = DIV4(FRQCRB, 24, 0xbff, 0),
+	[DIV4_ZTR] = DIV4(FRQCRB, 20, 0xfff, 0),
+	[DIV4_ZT] = DIV4(FRQCRB, 16, 0xfff, 0),
+	[DIV4_ZX] = DIV4(FRQCRB, 12, 0xfff, 0),
+	[DIV4_HP] = DIV4(FRQCRB, 4, 0xfff, 0),
+};
+
+enum { DIV6_VCK1, DIV6_VCK2, DIV6_VCK3, DIV6_ZB1,
+	DIV6_FLCTL, DIV6_SDHI0, DIV6_SDHI1, DIV6_SDHI2,
+	DIV6_FSIA, DIV6_FSIB, DIV6_SUB,
+	DIV6_SPUA, DIV6_SPUV, DIV6_MSU,
+	DIV6_HSI,  DIV6_MFG1, DIV6_MFG2,
+	DIV6_DSIT, DIV6_DSI0P, DIV6_DSI1P,
+	DIV6_NR };
+
+static struct clk div6_clks[DIV6_NR] = {
+	[DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0),
+	[DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0),
+	[DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0),
+	[DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0),
+	[DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0),
+	[DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0),
+	[DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
+	[DIV6_SDHI2] = SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0),
+	[DIV6_FSIA] = SH_CLK_DIV6(&pll1_div2_clk, FSIACKCR, 0),
+	[DIV6_FSIB] = SH_CLK_DIV6(&pll1_div2_clk, FSIBCKCR, 0),
+	[DIV6_SUB] = SH_CLK_DIV6(&sh73a0_extal2_clk, SUBCKCR, 0),
+	[DIV6_SPUA] = SH_CLK_DIV6(&pll1_div2_clk, SPUACKCR, 0),
+	[DIV6_SPUV] = SH_CLK_DIV6(&pll1_div2_clk, SPUVCKCR, 0),
+	[DIV6_MSU] = SH_CLK_DIV6(&pll1_div2_clk, MSUCKCR, 0),
+	[DIV6_HSI] = SH_CLK_DIV6(&pll1_div2_clk, HSICKCR, 0),
+	[DIV6_MFG1] = SH_CLK_DIV6(&pll1_div2_clk, MFCK1CR, 0),
+	[DIV6_MFG2] = SH_CLK_DIV6(&pll1_div2_clk, MFCK2CR, 0),
+	[DIV6_DSIT] = SH_CLK_DIV6(&pll1_div2_clk, DSITCKCR, 0),
+	[DIV6_DSI0P] = SH_CLK_DIV6(&pll1_div2_clk, DSI0PCKCR, 0),
+	[DIV6_DSI1P] = SH_CLK_DIV6(&pll1_div2_clk, DSI1PCKCR, 0),
+};
+
+enum { MSTP001,
+	MSTP125, MSTP116,
+	MSTP219,
+	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+	MSTP331, MSTP329, MSTP323, MSTP312,
+	MSTP411, MSTP410, MSTP403,
+	MSTP_NR };
+
+#define MSTP(_parent, _reg, _bit, _flags) \
+	SH_CLK_MSTP32(_parent, _reg, _bit, _flags)
+
+static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP001] = MSTP(&div4_clks[DIV4_HP], SMSTPCR0, 1, 0), /* IIC2 */
+	[MSTP125] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
+	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
+	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
+	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
+	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
+	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
+	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
+	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
+	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
+	[MSTP331] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 31, 0), /* SCIFA6 */
+	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
+	[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
+	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
+	[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
+	[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
+	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
+};
+
+#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
+#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
+
+static struct clk_lookup lookups[] = {
+	/* main clocks */
+	CLKDEV_CON_ID("r_clk", &r_clk),
+
+	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
+	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP125]), /* TMU00 */
+	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP125]), /* TMU01 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
+	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
+	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
+	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
+	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
+	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
+	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
+	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
+	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
+	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
+	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
+	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
+	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+};
+
+void __init sh73a0_clock_init(void)
+{
+	int k, ret = 0;
+
+	/* detect main clock parent */
+	switch ((__raw_readl(CKSCR) >> 24) & 0x03) {
+	case 0:
+		main_clk.parent = &sh73a0_extal1_clk;
+		break;
+	case 1:
+		main_clk.parent = &extal1_div2_clk;
+		break;
+	case 2:
+		main_clk.parent = &sh73a0_extal2_clk;
+		break;
+	case 3:
+		main_clk.parent = &extal2_div2_clk;
+		break;
+	}
+
+	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
+		ret = clk_register(main_clks[k]);
+
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+	if (!ret)
+		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
+
+	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+
+	if (!ret)
+		clk_init();
+	else
+		panic("failed to setup sh73a0 clocks\n");
+}
diff --git a/arch/arm/mach-shmobile/entry-gic.S b/arch/arm/mach-shmobile/entry-gic.S
new file mode 100644
index 00000000000..e20239b08c8
--- /dev/null
+++ b/arch/arm/mach-shmobile/entry-gic.S
@@ -0,0 +1,18 @@
+/*
+ * ARM Interrupt demux handler using GIC
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2011 Paul Mundt
+ * Copyright (C) 2010 - 2011 Renesas Solutions Corp.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/assembler.h>
+#include <asm/entry-macro-multi.S>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
+
+	arch_irq_handler shmobile_handle_irq_gic
diff --git a/arch/arm/mach-shmobile/entry-intc.S b/arch/arm/mach-shmobile/entry-intc.S
new file mode 100644
index 00000000000..cac0a7ae208
--- /dev/null
+++ b/arch/arm/mach-shmobile/entry-intc.S
@@ -0,0 +1,57 @@
+/*
+ * ARM Interrupt demux handler using INTC
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/entry-macro-multi.S>
+
+#define INTCA_BASE	0xe6980000
+#define INTFLGA_OFFS	0x00000018 /* accept pending interrupt */
+#define INTEVTA_OFFS	0x00000020 /* vector number of accepted interrupt */
+#define INTLVLA_OFFS	0x00000030 /* priority level of accepted interrupt */
+#define INTLVLB_OFFS	0x00000034 /* previous priority level */
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr     \base, =INTCA_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	/* The single INTFLGA read access below results in the following:
+	 *
+	 * 1. INTLVLB is updated with old priority value from INTLVLA
+	 * 2. Highest priority interrupt is accepted
+	 * 3. INTLVLA is updated to contain priority of accepted interrupt
+	 * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA
+	 */
+	ldr     \irqnr, [\base, #INTFLGA_OFFS]
+
+	/* Restore INTLVLA with the value saved in INTLVLB.
+	 * This is required to support interrupt priorities properly.
+	 */
+	ldrb	\tmp, [\base, #INTLVLB_OFFS]
+	strb    \tmp, [\base, #INTLVLA_OFFS]
+
+	/* Handle invalid vector number case */
+	cmp	\irqnr, #0
+	beq	1000f
+
+	/* Convert vector to irq number, same as the evt2irq() macro */
+	lsr	\irqnr, \irqnr, #0x5
+	subs	\irqnr, \irqnr, #16
+
+1000:
+	.endm
+
+	.macro  test_for_ipi, irqnr, irqstat, base, tmp
+	.endm
+
+	.macro  test_for_ltirq, irqnr, irqstat, base, tmp
+	.endm
+
+	arch_irq_handler shmobile_handle_irq_intc
diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S
new file mode 100644
index 00000000000..d4cec6b4c7d
--- /dev/null
+++ b/arch/arm/mach-shmobile/headsmp.S
@@ -0,0 +1,27 @@
+/*
+ * SMP support for R-Mobile / SH-Mobile
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2010  Takashi Yoshii
+ *
+ * Based on vexpress, Copyright (c) 2003 ARM Limited, All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/memory.h>
+
+	__INIT
+
+/*
+ * Reset vector for secondary CPUs.
+ * This will be mapped at address 0 by SBAR register.
+ * We need _long_ jump to the physical address.
+ */
+	.align  12
+ENTRY(shmobile_secondary_vector)
+	ldr     pc, 1f
+1:	.long   secondary_startup - PAGE_OFFSET + PHYS_OFFSET
diff --git a/arch/arm/mach-shmobile/hotplug.c b/arch/arm/mach-shmobile/hotplug.c
new file mode 100644
index 00000000000..238a0d97d2d
--- /dev/null
+++ b/arch/arm/mach-shmobile/hotplug.c
@@ -0,0 +1,41 @@
+/*
+ * SMP support for R-Mobile / SH-Mobile
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * Based on realview, Copyright (C) 2002 ARM Ltd, All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+void platform_cpu_die(unsigned int cpu)
+{
+	while (1) {
+		/*
+		 * here's the WFI
+		 */
+		asm(".word	0xe320f003\n"
+		    :
+		    :
+		    : "memory", "cc");
+	}
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index efeef778a87..013ac0ee825 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -3,8 +3,11 @@
 
 extern struct sys_timer shmobile_timer;
 extern void shmobile_setup_console(void);
+extern void shmobile_secondary_vector(void);
 struct clk;
 extern int clk_init(void);
+extern void shmobile_handle_irq_intc(struct pt_regs *);
+extern void shmobile_handle_irq_gic(struct pt_regs *);
 
 extern void sh7367_init_irq(void);
 extern void sh7367_add_early_devices(void);
@@ -30,4 +33,17 @@ extern void sh7372_pinmux_init(void);
 extern struct clk sh7372_extal1_clk;
 extern struct clk sh7372_extal2_clk;
 
+extern void sh73a0_init_irq(void);
+extern void sh73a0_add_early_devices(void);
+extern void sh73a0_add_standard_devices(void);
+extern void sh73a0_clock_init(void);
+extern void sh73a0_pinmux_init(void);
+extern struct clk sh73a0_extal1_clk;
+extern struct clk sh73a0_extal2_clk;
+
+extern unsigned int sh73a0_get_core_count(void);
+extern void sh73a0_secondary_init(unsigned int cpu);
+extern int sh73a0_boot_secondary(unsigned int cpu);
+extern void sh73a0_smp_prepare_cpus(void);
+
 #endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index a285d13c741..d791f10eeac 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2010  Paul Mundt
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,26 +14,21 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 
 	.macro  disable_fiq
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
-	ldr     \base, =INTFLGA
 	.endm
 
-	.macro  arch_ret_to_user, tmp1, tmp2
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
 	.endm
 
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr     \irqnr, [\base]
-	cmp	\irqnr, #0
-	beq	1000f
-	/* intevt to irq number */
-	lsr	\irqnr, \irqnr, #0x5
-	subs	\irqnr, \irqnr, #16
+	.macro  test_for_ipi, irqnr, irqstat, base, tmp
+	.endm
 
-1000:
+	.macro  test_for_ltirq, irqnr, irqstat, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
diff --git a/arch/arm/mach-shmobile/include/mach/hardware.h b/arch/arm/mach-shmobile/include/mach/hardware.h
index 3f0ef194603..99264a5ce5e 100644
--- a/arch/arm/mach-shmobile/include/mach/hardware.h
+++ b/arch/arm/mach-shmobile/include/mach/hardware.h
@@ -1,7 +1,4 @@
 #ifndef __ASM_MACH_HARDWARE_H
 #define __ASM_MACH_HARDWARE_H
 
-/* INTFLGA register - used by low level interrupt code in entry-macro.S */
-#define INTFLGA			0xe6980018
-
 #endif /* __ASM_MACH_HARDWARE_H */
diff --git a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
new file mode 100644
index 00000000000..e3ebfa73956
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt
@@ -0,0 +1,87 @@
+LIST "partner-jet-setup.txt"
+LIST "(C) Copyright 2010 Renesas Solutions Corp"
+LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
+
+LIST "RWT Setting"
+EW 0xE6020004, 0xA500
+EW 0xE6030004, 0xA500
+
+DD 0x01001000, 0x01001000
+
+LIST "GPIO Setting"
+EB 0xE6051013, 0xA2
+
+LIST "CPG"
+ED 0xE6150080, 0x00000180
+ED 0xE61500C0, 0x00000002
+
+WAIT 1, 0xFE40009C
+
+LIST "FRQCR"
+ED 0xE6150000, 0x2D1305C3
+ED 0xE61500E0, 0x9E40358E
+ED 0xE6150004, 0x80331050
+
+WAIT 1, 0xFE40009C
+
+ED 0xE61500E4, 0x00002000
+
+WAIT 1, 0xFE40009C
+
+LIST "PLL"
+ED 0xE6150028, 0x00004000
+
+WAIT 1, 0xFE40009C
+
+ED 0xE615002C, 0x93000040
+
+WAIT 1, 0xFE40009C
+
+LIST "BSC"
+ED 0xFEC10000, 0x00E0001B
+
+LIST "SBSC1"
+ED 0xFE400354, 0x01AD8000
+ED 0xFE400354, 0x01AD8001
+
+WAIT 5, 0xFE40009C
+
+ED 0xFE400008, 0xBCC90151
+ED 0xFE400040, 0x41774113
+ED 0xFE400044, 0x2712E229
+ED 0xFE400048, 0x20C18505
+ED 0xFE40004C, 0x00110209
+ED 0xFE400010, 0x00000087
+
+WAIT 10, 0xFE40009C
+
+ED 0xFE400084, 0x0000003F
+EB 0xFE500000, 0x00
+
+WAIT 5, 0xFE40009C
+
+ED 0xFE400084, 0x0000FF0A
+EB 0xFE500000, 0x00
+
+WAIT 1, 0xFE40009C
+
+ED 0xFE400084, 0x00002201
+EB 0xFE500000, 0x00
+ED 0xFE400084, 0x00000302
+EB 0xFE500000, 0x00
+EB 0xFE5C0000, 0x00
+ED 0xFE400008, 0xBCC90159
+ED 0xFE40008C, 0x88800004
+ED 0xFE400094, 0x00000004
+ED 0xFE400028, 0xA55A0032
+ED 0xFE40002C, 0xA55A000C
+ED 0xFE400020, 0xA55A2048
+ED 0xFE400008, 0xBCC90959
+
+LIST "Change CPGA setting"
+ED 0xE61500E0, 0x9E40352E
+ED 0xE6150004, 0x80331050
+
+WAIT 1, 0xFE40009C
+
+ED 0xE6150354, 0x00000002
diff --git a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
new file mode 100644
index 00000000000..e3ebfa73956
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt
@@ -0,0 +1,87 @@
+LIST "partner-jet-setup.txt"
+LIST "(C) Copyright 2010 Renesas Solutions Corp"
+LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
+
+LIST "RWT Setting"
+EW 0xE6020004, 0xA500
+EW 0xE6030004, 0xA500
+
+DD 0x01001000, 0x01001000
+
+LIST "GPIO Setting"
+EB 0xE6051013, 0xA2
+
+LIST "CPG"
+ED 0xE6150080, 0x00000180
+ED 0xE61500C0, 0x00000002
+
+WAIT 1, 0xFE40009C
+
+LIST "FRQCR"
+ED 0xE6150000, 0x2D1305C3
+ED 0xE61500E0, 0x9E40358E
+ED 0xE6150004, 0x80331050
+
+WAIT 1, 0xFE40009C
+
+ED 0xE61500E4, 0x00002000
+
+WAIT 1, 0xFE40009C
+
+LIST "PLL"
+ED 0xE6150028, 0x00004000
+
+WAIT 1, 0xFE40009C
+
+ED 0xE615002C, 0x93000040
+
+WAIT 1, 0xFE40009C
+
+LIST "BSC"
+ED 0xFEC10000, 0x00E0001B
+
+LIST "SBSC1"
+ED 0xFE400354, 0x01AD8000
+ED 0xFE400354, 0x01AD8001
+
+WAIT 5, 0xFE40009C
+
+ED 0xFE400008, 0xBCC90151
+ED 0xFE400040, 0x41774113
+ED 0xFE400044, 0x2712E229
+ED 0xFE400048, 0x20C18505
+ED 0xFE40004C, 0x00110209
+ED 0xFE400010, 0x00000087
+
+WAIT 10, 0xFE40009C
+
+ED 0xFE400084, 0x0000003F
+EB 0xFE500000, 0x00
+
+WAIT 5, 0xFE40009C
+
+ED 0xFE400084, 0x0000FF0A
+EB 0xFE500000, 0x00
+
+WAIT 1, 0xFE40009C
+
+ED 0xFE400084, 0x00002201
+EB 0xFE500000, 0x00
+ED 0xFE400084, 0x00000302
+EB 0xFE500000, 0x00
+EB 0xFE5C0000, 0x00
+ED 0xFE400008, 0xBCC90159
+ED 0xFE40008C, 0x88800004
+ED 0xFE400094, 0x00000004
+ED 0xFE400028, 0xA55A0032
+ED 0xFE40002C, 0xA55A000C
+ED 0xFE400020, 0xA55A2048
+ED 0xFE400008, 0xBCC90959
+
+LIST "Change CPGA setting"
+ED 0xE61500E0, 0x9E40352E
+ED 0xE6150004, 0x80331050
+
+WAIT 1, 0xFE40009C
+
+ED 0xE6150354, 0x00000002
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index fa15b5f8a00..dcb714f4d75 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -1,7 +1,10 @@
 #ifndef __ASM_MACH_IRQS_H
 #define __ASM_MACH_IRQS_H
 
-#define NR_IRQS         512
+#define NR_IRQS         1024
+
+/* GIC */
+#define gic_spi(nr)		((nr) + 32)
 
 /* INTCA */
 #define evt2irq(evt)		(((evt) >> 5) - 16)
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index e4f9004e710..5736efcca60 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -455,6 +455,8 @@ enum {
 	SHDMA_SLAVE_SDHI1_TX,
 	SHDMA_SLAVE_SDHI2_RX,
 	SHDMA_SLAVE_SDHI2_TX,
+	SHDMA_SLAVE_MMCIF_RX,
+	SHDMA_SLAVE_MMCIF_TX,
 };
 
 extern struct clk sh7372_extal1_clk;
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
new file mode 100644
index 00000000000..ceb2cdc92bf
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -0,0 +1,467 @@
+#ifndef __ASM_SH73A0_H__
+#define __ASM_SH73A0_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function and MSEL switch
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+	/* Hardware manual Table 25-1 (GPIO) */
+	GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+	GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+	GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+	GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+	GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+	GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+	GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+	GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+	GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+	GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+	GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+	GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+	GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+	GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+	GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+	GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+	GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+	GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+	GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+	GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+	GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+	GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+	GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+	GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
+
+	GPIO_PORT128, GPIO_PORT129,
+
+	GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+	GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+	GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+	GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+	GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+	GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+	GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+
+	GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+	GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+	GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+	GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+	GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+	GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+	GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+	GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+	GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+	GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+	GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+	GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+	GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+	GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+	GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+	GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
+
+	GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, GPIO_PORT273, GPIO_PORT274,
+	GPIO_PORT275, GPIO_PORT276, GPIO_PORT277, GPIO_PORT278, GPIO_PORT279,
+
+	GPIO_PORT280, GPIO_PORT281, GPIO_PORT282,
+
+	GPIO_PORT288, GPIO_PORT289,
+
+	GPIO_PORT290, GPIO_PORT291, GPIO_PORT292, GPIO_PORT293, GPIO_PORT294,
+	GPIO_PORT295, GPIO_PORT296, GPIO_PORT297, GPIO_PORT298, GPIO_PORT299,
+
+	GPIO_PORT300, GPIO_PORT301, GPIO_PORT302, GPIO_PORT303, GPIO_PORT304,
+	GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309,
+
+	/* Table 25-1 (Function 0-7) */
+	GPIO_FN_VBUS_0,
+	GPIO_FN_GPI0,
+	GPIO_FN_GPI1,
+	GPIO_FN_GPI2,
+	GPIO_FN_GPI3,
+	GPIO_FN_GPI4,
+	GPIO_FN_GPI5,
+	GPIO_FN_GPI6,
+	GPIO_FN_GPI7,
+	GPIO_FN_SCIFA7_RXD,
+	GPIO_FN_SCIFA7_CTS_,
+	GPIO_FN_GPO7, GPIO_FN_MFG0_OUT2,
+	GPIO_FN_GPO6, GPIO_FN_MFG1_OUT2,
+	GPIO_FN_GPO5, GPIO_FN_SCIFA0_SCK, GPIO_FN_FSICOSLDT3, \
+	GPIO_FN_PORT16_VIO_CKOR,
+	GPIO_FN_SCIFA0_TXD,
+	GPIO_FN_SCIFA7_TXD,
+	GPIO_FN_SCIFA7_RTS_, GPIO_FN_PORT19_VIO_CKO2,
+	GPIO_FN_GPO0,
+	GPIO_FN_GPO1,
+	GPIO_FN_GPO2, GPIO_FN_STATUS0,
+	GPIO_FN_GPO3, GPIO_FN_STATUS1,
+	GPIO_FN_GPO4, GPIO_FN_STATUS2,
+	GPIO_FN_VINT,
+	GPIO_FN_TCKON,
+	GPIO_FN_XDVFS1, GPIO_FN_PORT27_I2C_SCL2, GPIO_FN_PORT27_I2C_SCL3, \
+	GPIO_FN_MFG0_OUT1, GPIO_FN_PORT27_IROUT,
+	GPIO_FN_XDVFS2, GPIO_FN_PORT28_I2C_SDA2, GPIO_FN_PORT28_I2C_SDA3, \
+	GPIO_FN_PORT28_TPU1TO1,
+	GPIO_FN_SIM_RST, GPIO_FN_PORT29_TPU1TO1,
+	GPIO_FN_SIM_CLK, GPIO_FN_PORT30_VIO_CKOR,
+	GPIO_FN_SIM_D, GPIO_FN_PORT31_IROUT,
+	GPIO_FN_SCIFA4_TXD,
+	GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+	GPIO_FN_SCIFA4_RTS_,
+	GPIO_FN_SCIFA4_CTS_,
+	GPIO_FN_FSIBOBT, GPIO_FN_FSIBIBT,
+	GPIO_FN_FSIBOLR, GPIO_FN_FSIBILR,
+	GPIO_FN_FSIBOSLD,
+	GPIO_FN_FSIBISLD,
+	GPIO_FN_VACK,
+	GPIO_FN_XTAL1L,
+	GPIO_FN_SCIFA0_RTS_, GPIO_FN_FSICOSLDT2,
+	GPIO_FN_SCIFA0_RXD,
+	GPIO_FN_SCIFA0_CTS_, GPIO_FN_FSICOSLDT1,
+	GPIO_FN_FSICOBT, GPIO_FN_FSICIBT, GPIO_FN_FSIDOBT, GPIO_FN_FSIDIBT,
+	GPIO_FN_FSICOLR, GPIO_FN_FSICILR, GPIO_FN_FSIDOLR, GPIO_FN_FSIDILR,
+	GPIO_FN_FSICOSLD, GPIO_FN_PORT47_FSICSPDIF,
+	GPIO_FN_FSICISLD, GPIO_FN_FSIDISLD,
+	GPIO_FN_FSIACK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, \
+	GPIO_FN_FSIAOMC,
+	GPIO_FN_FSIAOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_FSIAILR,
+
+	GPIO_FN_FSIAOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_FSIAIBT,
+	GPIO_FN_FSIAOSLD, GPIO_FN_BBIF2_TXD2,
+	GPIO_FN_FSIASPDIF, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, \
+	GPIO_FN_FSIBSPDIF, GPIO_FN_PORT53_FSICSPDIF,
+	GPIO_FN_FSIBCK, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, \
+	GPIO_FN_FSIBOMC, GPIO_FN_FSICCK, GPIO_FN_FSICOMC,
+	GPIO_FN_FSIAISLD, GPIO_FN_TPU0TO0,
+	GPIO_FN_A0, GPIO_FN_BS_,
+	GPIO_FN_A12, GPIO_FN_PORT58_KEYOUT7, GPIO_FN_TPU4TO2,
+	GPIO_FN_A13, GPIO_FN_PORT59_KEYOUT6, GPIO_FN_TPU0TO1,
+	GPIO_FN_A14, GPIO_FN_KEYOUT5,
+	GPIO_FN_A15, GPIO_FN_KEYOUT4,
+	GPIO_FN_A16, GPIO_FN_KEYOUT3, GPIO_FN_MSIOF0_SS1,
+	GPIO_FN_A17, GPIO_FN_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
+	GPIO_FN_A18, GPIO_FN_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
+	GPIO_FN_A19, GPIO_FN_KEYOUT0, GPIO_FN_MSIOF0_TXD,
+	GPIO_FN_A20, GPIO_FN_KEYIN0, GPIO_FN_MSIOF0_RSCK,
+	GPIO_FN_A21, GPIO_FN_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
+	GPIO_FN_A22, GPIO_FN_KEYIN2, GPIO_FN_MSIOF0_MCK0,
+	GPIO_FN_A23, GPIO_FN_KEYIN3, GPIO_FN_MSIOF0_MCK1,
+	GPIO_FN_A24, GPIO_FN_KEYIN4, GPIO_FN_MSIOF0_RXD,
+	GPIO_FN_A25, GPIO_FN_KEYIN5, GPIO_FN_MSIOF0_SS2,
+	GPIO_FN_A26, GPIO_FN_KEYIN6,
+	GPIO_FN_KEYIN7,
+	GPIO_FN_D0_NAF0,
+	GPIO_FN_D1_NAF1,
+	GPIO_FN_D2_NAF2,
+	GPIO_FN_D3_NAF3,
+	GPIO_FN_D4_NAF4,
+	GPIO_FN_D5_NAF5,
+	GPIO_FN_D6_NAF6,
+	GPIO_FN_D7_NAF7,
+	GPIO_FN_D8_NAF8,
+	GPIO_FN_D9_NAF9,
+	GPIO_FN_D10_NAF10,
+	GPIO_FN_D11_NAF11,
+	GPIO_FN_D12_NAF12,
+	GPIO_FN_D13_NAF13,
+	GPIO_FN_D14_NAF14,
+	GPIO_FN_D15_NAF15,
+	GPIO_FN_CS4_,
+	GPIO_FN_CS5A_, GPIO_FN_PORT91_RDWR,
+	GPIO_FN_CS5B_, GPIO_FN_FCE1_,
+	GPIO_FN_CS6B_, GPIO_FN_DACK0,
+	GPIO_FN_FCE0_, GPIO_FN_CS6A_,
+	GPIO_FN_WAIT_, GPIO_FN_DREQ0,
+	GPIO_FN_RD__FSC,
+	GPIO_FN_WE0__FWE, GPIO_FN_RDWR_FWE,
+	GPIO_FN_WE1_,
+	GPIO_FN_FRB,
+	GPIO_FN_CKO,
+	GPIO_FN_NBRSTOUT_,
+	GPIO_FN_NBRST_,
+	GPIO_FN_BBIF2_TXD,
+	GPIO_FN_BBIF2_RXD,
+	GPIO_FN_BBIF2_SYNC,
+	GPIO_FN_BBIF2_SCK,
+	GPIO_FN_SCIFA3_CTS_, GPIO_FN_MFG3_IN2,
+	GPIO_FN_SCIFA3_RXD, GPIO_FN_MFG3_IN1,
+	GPIO_FN_BBIF1_SS2, GPIO_FN_SCIFA3_RTS_, GPIO_FN_MFG3_OUT1,
+	GPIO_FN_SCIFA3_TXD,
+	GPIO_FN_HSI_RX_DATA, GPIO_FN_BBIF1_RXD,
+	GPIO_FN_HSI_TX_WAKE, GPIO_FN_BBIF1_TSCK,
+	GPIO_FN_HSI_TX_DATA, GPIO_FN_BBIF1_TSYNC,
+	GPIO_FN_HSI_TX_READY, GPIO_FN_BBIF1_TXD,
+	GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK, GPIO_FN_PORT115_I2C_SCL2, \
+	GPIO_FN_PORT115_I2C_SCL3,
+	GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC, GPIO_FN_PORT116_I2C_SDA2, \
+	GPIO_FN_PORT116_I2C_SDA3,
+	GPIO_FN_HSI_RX_FLAG, GPIO_FN_BBIF1_SS1, GPIO_FN_BBIF1_FLOW,
+	GPIO_FN_HSI_TX_FLAG,
+	GPIO_FN_VIO_VD, GPIO_FN_PORT128_LCD2VSYN, GPIO_FN_VIO2_VD, \
+	GPIO_FN_LCD2D0,
+
+	GPIO_FN_VIO_HD, GPIO_FN_PORT129_LCD2HSYN, GPIO_FN_PORT129_LCD2CS_, \
+	GPIO_FN_VIO2_HD, GPIO_FN_LCD2D1,
+	GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD, GPIO_FN_LCD2D10,
+	GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT6, GPIO_FN_PORT131_MSIOF2_SS1, \
+	GPIO_FN_PORT131_KEYOUT11, GPIO_FN_LCD2D11,
+	GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT7, GPIO_FN_PORT132_MSIOF2_SS2, \
+	GPIO_FN_PORT132_KEYOUT10, GPIO_FN_LCD2D12,
+	GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_LCD2D13,
+	GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD, GPIO_FN_LCD2D14,
+	GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK, GPIO_FN_LCD2D15,
+	GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYOUT8, GPIO_FN_LCD2D16,
+	GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYOUT9, GPIO_FN_LCD2D17,
+	GPIO_FN_VIO_D8, GPIO_FN_PORT138_KEYOUT8, GPIO_FN_VIO2_D0, \
+	GPIO_FN_LCD2D6,
+	GPIO_FN_VIO_D9, GPIO_FN_PORT139_KEYOUT9, GPIO_FN_VIO2_D1, \
+	GPIO_FN_LCD2D7,
+	GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2, GPIO_FN_LCD2D8,
+	GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3, GPIO_FN_LCD2D9,
+	GPIO_FN_VIO_D12, GPIO_FN_PORT142_KEYOUT10, GPIO_FN_VIO2_D4, \
+	GPIO_FN_LCD2D2,
+	GPIO_FN_VIO_D13, GPIO_FN_PORT143_KEYOUT11, GPIO_FN_PORT143_KEYOUT6, \
+	GPIO_FN_VIO2_D5, GPIO_FN_LCD2D3,
+	GPIO_FN_VIO_D14, GPIO_FN_PORT144_KEYOUT7, GPIO_FN_VIO2_D6, \
+	GPIO_FN_LCD2D4,
+	GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_LCD2DISP, \
+	GPIO_FN_PORT145_LCD2RS, GPIO_FN_VIO2_D7, GPIO_FN_LCD2D5,
+	GPIO_FN_VIO_CLK, GPIO_FN_LCD2DCK, GPIO_FN_PORT146_LCD2WR_, \
+	GPIO_FN_VIO2_CLK, GPIO_FN_LCD2D18,
+	GPIO_FN_VIO_FIELD, GPIO_FN_LCD2RD_, GPIO_FN_VIO2_FIELD, GPIO_FN_LCD2D19,
+	GPIO_FN_VIO_CKO,
+	GPIO_FN_A27, GPIO_FN_PORT149_RDWR, GPIO_FN_MFG0_IN1, \
+	GPIO_FN_PORT149_KEYOUT9,
+	GPIO_FN_MFG0_IN2,
+	GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
+	GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
+	GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
+	GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
+	GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
+	GPIO_FN_SCIFA2_RTS1_, GPIO_FN_PORT156_MSIOF2_SS2,
+	GPIO_FN_SCIFA2_CTS1_, GPIO_FN_PORT157_MSIOF2_RXD,
+	GPIO_FN_DINT_, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+	GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
+	GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD,
+	GPIO_FN_PORT161_SCIFB_CTS_, GPIO_FN_PORT161_SCIFA5_CTS_,
+	GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD,
+	GPIO_FN_PORT163_SCIFB_RTS_, GPIO_FN_PORT163_SCIFA5_RTS_, \
+	GPIO_FN_TPU3TO0,
+	GPIO_FN_LCDD0,
+	GPIO_FN_LCDD1, GPIO_FN_PORT193_SCIFA5_CTS_, GPIO_FN_BBIF2_TSYNC1,
+	GPIO_FN_LCDD2, GPIO_FN_PORT194_SCIFA5_RTS_, GPIO_FN_BBIF2_TSCK1,
+	GPIO_FN_LCDD3, GPIO_FN_PORT195_SCIFA5_RXD, GPIO_FN_BBIF2_TXD1,
+	GPIO_FN_LCDD4, GPIO_FN_PORT196_SCIFA5_TXD,
+	GPIO_FN_LCDD5, GPIO_FN_PORT197_SCIFA5_SCK, GPIO_FN_MFG2_OUT2, \
+	GPIO_FN_TPU2TO1,
+	GPIO_FN_LCDD6,
+	GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2,
+	GPIO_FN_LCDD8, GPIO_FN_D16,
+	GPIO_FN_LCDD9, GPIO_FN_D17,
+	GPIO_FN_LCDD10, GPIO_FN_D18,
+	GPIO_FN_LCDD11, GPIO_FN_D19,
+	GPIO_FN_LCDD12, GPIO_FN_D20,
+	GPIO_FN_LCDD13, GPIO_FN_D21,
+	GPIO_FN_LCDD14, GPIO_FN_D22,
+	GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23,
+	GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24,
+	GPIO_FN_LCDD17, GPIO_FN_D25,
+	GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
+	GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27,
+	GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
+	GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
+	GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
+	GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
+	GPIO_FN_LCDDCK, GPIO_FN_LCDWR_,
+	GPIO_FN_LCDRD_, GPIO_FN_DACK2, GPIO_FN_PORT217_LCD2RS, \
+	GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3, GPIO_FN_PORT217_LCD2DISP,
+	GPIO_FN_LCDHSYN, GPIO_FN_LCDCS_, GPIO_FN_LCDCS2_, GPIO_FN_DACK3, \
+	GPIO_FN_PORT218_VIO_CKOR,
+	GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_PORT219_LCD2WR_, \
+	GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, GPIO_FN_VIO2_CLK3, \
+	GPIO_FN_LCD2DCK_2,
+	GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2,
+	GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PORT221_LCD2CS_, \
+	GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, GPIO_FN_VIO2_HD3, \
+	GPIO_FN_PORT221_LCD2HSYN,
+	GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, \
+	GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3, GPIO_FN_PORT222_LCD2VSYN,
+
+	GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
+	GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_PORT226_VIO_CKO2,
+	GPIO_FN_SCIFA1_RTS_, GPIO_FN_IDIN,
+	GPIO_FN_SCIFA1_RXD,
+	GPIO_FN_SCIFA1_CTS_, GPIO_FN_MFG1_IN1,
+	GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2,
+	GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2_,
+	GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2,
+	GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2,
+	GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2_, GPIO_FN_VIO2_CLK2, \
+	GPIO_FN_LCD2D20,
+	GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MFG1_IN2, GPIO_FN_VIO2_VD2, \
+	GPIO_FN_LCD2D21,
+	GPIO_FN_MSIOF1_MCK0, GPIO_FN_PORT236_I2C_SDA2,
+	GPIO_FN_MSIOF1_MCK1, GPIO_FN_PORT237_I2C_SCL2,
+	GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2, GPIO_FN_LCD2D22,
+	GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2, GPIO_FN_LCD2D23,
+	GPIO_FN_SCIFA6_TXD,
+	GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \
+	GPIO_FN_TPU4TO0,
+	GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
+	GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
+	GPIO_FN_PORT244_SCIFA5_CTS_, GPIO_FN_MFG2_IN1, \
+	GPIO_FN_PORT244_SCIFB_CTS_, GPIO_FN_MSIOF2R_RXD,
+	GPIO_FN_PORT245_SCIFA5_RTS_, GPIO_FN_MFG2_IN2, \
+	GPIO_FN_PORT245_SCIFB_RTS_, GPIO_FN_MSIOF2R_TXD,
+	GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, \
+	GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
+	GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, \
+	GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
+	GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, \
+	GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, \
+	GPIO_FN_PORT248_I2C_SCL3, GPIO_FN_MSIOF2R_TSCK,
+	GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, \
+	GPIO_FN_PORT249_I2C_SDA3, GPIO_FN_MSIOF2R_TSYNC,
+	GPIO_FN_SDHICLK0,
+	GPIO_FN_SDHICD0,
+	GPIO_FN_SDHID0_0,
+	GPIO_FN_SDHID0_1,
+	GPIO_FN_SDHID0_2,
+	GPIO_FN_SDHID0_3,
+	GPIO_FN_SDHICMD0,
+	GPIO_FN_SDHIWP0,
+	GPIO_FN_SDHICLK1,
+	GPIO_FN_SDHID1_0, GPIO_FN_TS_SPSYNC2,
+	GPIO_FN_SDHID1_1, GPIO_FN_TS_SDAT2,
+	GPIO_FN_SDHID1_2, GPIO_FN_TS_SDEN2,
+	GPIO_FN_SDHID1_3, GPIO_FN_TS_SCK2,
+	GPIO_FN_SDHICMD1,
+	GPIO_FN_SDHICLK2,
+	GPIO_FN_SDHID2_0, GPIO_FN_TS_SPSYNC4,
+	GPIO_FN_SDHID2_1, GPIO_FN_TS_SDAT4,
+	GPIO_FN_SDHID2_2, GPIO_FN_TS_SDEN4,
+	GPIO_FN_SDHID2_3, GPIO_FN_TS_SCK4,
+	GPIO_FN_SDHICMD2,
+	GPIO_FN_MMCCLK0,
+	GPIO_FN_MMCD0_0,
+	GPIO_FN_MMCD0_1,
+	GPIO_FN_MMCD0_2,
+	GPIO_FN_MMCD0_3,
+	GPIO_FN_MMCD0_4, GPIO_FN_TS_SPSYNC5,
+	GPIO_FN_MMCD0_5, GPIO_FN_TS_SDAT5,
+	GPIO_FN_MMCD0_6, GPIO_FN_TS_SDEN5,
+	GPIO_FN_MMCD0_7, GPIO_FN_TS_SCK5,
+	GPIO_FN_MMCCMD0,
+	GPIO_FN_RESETOUTS_, GPIO_FN_EXTAL2OUT,
+	GPIO_FN_MCP_WAIT__MCP_FRB,
+	GPIO_FN_MCP_CKO, GPIO_FN_MMCCLK1,
+	GPIO_FN_MCP_D15_MCP_NAF15,
+	GPIO_FN_MCP_D14_MCP_NAF14,
+	GPIO_FN_MCP_D13_MCP_NAF13,
+	GPIO_FN_MCP_D12_MCP_NAF12,
+	GPIO_FN_MCP_D11_MCP_NAF11,
+	GPIO_FN_MCP_D10_MCP_NAF10,
+	GPIO_FN_MCP_D9_MCP_NAF9,
+	GPIO_FN_MCP_D8_MCP_NAF8, GPIO_FN_MMCCMD1,
+	GPIO_FN_MCP_D7_MCP_NAF7, GPIO_FN_MMCD1_7,
+
+	GPIO_FN_MCP_D6_MCP_NAF6, GPIO_FN_MMCD1_6,
+	GPIO_FN_MCP_D5_MCP_NAF5, GPIO_FN_MMCD1_5,
+	GPIO_FN_MCP_D4_MCP_NAF4, GPIO_FN_MMCD1_4,
+	GPIO_FN_MCP_D3_MCP_NAF3, GPIO_FN_MMCD1_3,
+	GPIO_FN_MCP_D2_MCP_NAF2, GPIO_FN_MMCD1_2,
+	GPIO_FN_MCP_D1_MCP_NAF1, GPIO_FN_MMCD1_1,
+	GPIO_FN_MCP_D0_MCP_NAF0, GPIO_FN_MMCD1_0,
+	GPIO_FN_MCP_NBRSTOUT_,
+	GPIO_FN_MCP_WE0__MCP_FWE, GPIO_FN_MCP_RDWR_MCP_FWE,
+
+	/* MSEL2 special case */
+	GPIO_FN_TSIF2_TS_XX1,
+	GPIO_FN_TSIF2_TS_XX2,
+	GPIO_FN_TSIF2_TS_XX3,
+	GPIO_FN_TSIF2_TS_XX4,
+	GPIO_FN_TSIF2_TS_XX5,
+	GPIO_FN_TSIF1_TS_XX1,
+	GPIO_FN_TSIF1_TS_XX2,
+	GPIO_FN_TSIF1_TS_XX3,
+	GPIO_FN_TSIF1_TS_XX4,
+	GPIO_FN_TSIF1_TS_XX5,
+	GPIO_FN_TSIF0_TS_XX1,
+	GPIO_FN_TSIF0_TS_XX2,
+	GPIO_FN_TSIF0_TS_XX3,
+	GPIO_FN_TSIF0_TS_XX4,
+	GPIO_FN_TSIF0_TS_XX5,
+	GPIO_FN_MST1_TS_XX1,
+	GPIO_FN_MST1_TS_XX2,
+	GPIO_FN_MST1_TS_XX3,
+	GPIO_FN_MST1_TS_XX4,
+	GPIO_FN_MST1_TS_XX5,
+	GPIO_FN_MST0_TS_XX1,
+	GPIO_FN_MST0_TS_XX2,
+	GPIO_FN_MST0_TS_XX3,
+	GPIO_FN_MST0_TS_XX4,
+	GPIO_FN_MST0_TS_XX5,
+
+	/* MSEL3 special cases */
+	GPIO_FN_SDHI0_VCCQ_MC0_ON,
+	GPIO_FN_SDHI0_VCCQ_MC0_OFF,
+	GPIO_FN_DEBUG_MON_VIO,
+	GPIO_FN_DEBUG_MON_LCDD,
+	GPIO_FN_LCDC_LCDC0,
+	GPIO_FN_LCDC_LCDC1,
+
+	/* MSEL4 special cases */
+	GPIO_FN_IRQ9_MEM_INT,
+	GPIO_FN_IRQ9_MCP_INT,
+	GPIO_FN_A11,
+	GPIO_FN_KEYOUT8,
+	GPIO_FN_TPU4TO3,
+	GPIO_FN_RESETA_N_PU_ON,
+	GPIO_FN_RESETA_N_PU_OFF,
+	GPIO_FN_EDBGREQ_PD,
+	GPIO_FN_EDBGREQ_PU,
+
+	/* Functions with pull-ups */
+	GPIO_FN_KEYIN0_PU,
+	GPIO_FN_KEYIN1_PU,
+	GPIO_FN_KEYIN2_PU,
+	GPIO_FN_KEYIN3_PU,
+	GPIO_FN_KEYIN4_PU,
+	GPIO_FN_KEYIN5_PU,
+	GPIO_FN_KEYIN6_PU,
+	GPIO_FN_KEYIN7_PU,
+	GPIO_FN_SDHID1_0_PU,
+	GPIO_FN_SDHID1_1_PU,
+	GPIO_FN_SDHID1_2_PU,
+	GPIO_FN_SDHID1_3_PU,
+	GPIO_FN_SDHICMD1_PU,
+	GPIO_FN_MMCCMD0_PU,
+	GPIO_FN_MMCCMD1_PU,
+	GPIO_FN_FSIACK_PU,
+	GPIO_FN_FSIAILR_PU,
+	GPIO_FN_FSIAIBT_PU,
+	GPIO_FN_FSIAISLD_PU,
+};
+
+#endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/include/mach/smp.h b/arch/arm/mach-shmobile/include/mach/smp.h
new file mode 100644
index 00000000000..50db94e927a
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/smp.h
@@ -0,0 +1,16 @@
+#ifndef __MACH_SMP_H
+#define __MACH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
+{
+#if defined(CONFIG_ARM_GIC)
+	gic_raise_softirq(mask, ipi);
+#endif
+}
+
+#endif
diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h
index 4aecf6e3a85..2b8fd8b942f 100644
--- a/arch/arm/mach-shmobile/include/mach/vmalloc.h
+++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h
@@ -2,6 +2,6 @@
 #define __ASM_MACH_VMALLOC_H
 
 /* Vmalloc at ... - 0xe5ffffff */
-#define VMALLOC_END 0xe6000000
+#define VMALLOC_END 0xe6000000UL
 
 #endif /* __ASM_MACH_VMALLOC_H */
diff --git a/arch/arm/mach-shmobile/include/mach/zboot.h b/arch/arm/mach-shmobile/include/mach/zboot.h
new file mode 100644
index 00000000000..6d6a205bcf9
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/zboot.h
@@ -0,0 +1,23 @@
+#ifndef ZBOOT_H
+#define ZBOOT_H
+
+#include <asm/mach-types.h>
+#include <mach/zboot_macros.h>
+
+/**************************************************
+ *
+ *		board specific settings
+ *
+ **************************************************/
+
+#ifdef CONFIG_MACH_AP4EVB
+#define MACH_TYPE	MACH_TYPE_AP4EVB
+#include "mach/head-ap4evb.txt"
+#elif CONFIG_MACH_MACKEREL
+#define MACH_TYPE	MACH_TYPE_MACKEREL
+#include "mach/head-mackerel.txt"
+#else
+#error "unsupported board."
+#endif
+
+#endif /* ZBOOT_H */
diff --git a/arch/arm/mach-shmobile/include/mach/zboot_macros.h b/arch/arm/mach-shmobile/include/mach/zboot_macros.h
new file mode 100644
index 00000000000..aa6111fbc98
--- /dev/null
+++ b/arch/arm/mach-shmobile/include/mach/zboot_macros.h
@@ -0,0 +1,65 @@
+#ifndef __ZBOOT_MACRO_H
+#define __ZBOOT_MACRO_H
+
+/* The LIST command is used to include comments in the script */
+.macro	LIST comment
+.endm
+
+/* The ED command is used to write a 32-bit word */
+.macro ED, addr, data
+	LDR	r0, 1f
+	LDR	r1, 2f
+	STR	r1, [r0]
+	B	3f
+1 :	.long	\addr
+2 :	.long	\data
+3 :
+.endm
+
+/* The EW command is used to write a 16-bit word */
+.macro EW, addr, data
+	LDR	r0, 1f
+	LDR	r1, 2f
+	STRH	r1, [r0]
+	B	3f
+1 :	.long	\addr
+2 :	.long	\data
+3 :
+.endm
+
+/* The EB command is used to write an 8-bit word */
+.macro EB, addr, data
+	LDR	r0, 1f
+	LDR	r1, 2f
+	STRB	r1, [r0]
+	B	3f
+1 :	.long	\addr
+2 :	.long	\data
+3 :
+.endm
+
+/* The WAIT command is used to delay the execution */
+.macro  WAIT, time, reg
+	LDR	r1, 1f
+	LDR	r0, 2f
+	STR	r0, [r1]
+10 :
+	LDR	r0, [r1]
+	CMP	r0, #0x00000000
+	BNE	10b
+	NOP
+	B	3f
+1 :	.long	\reg
+2 :	.long	\time * 100
+3 :
+.endm
+
+/* The DD command is used to read a 32-bit word */
+.macro  DD, start, end
+	LDR	r1, 1f
+	B	2f
+1 :	.long	\start
+2 :
+.endm
+
+#endif /* __ZBOOT_MACRO_H */
diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c
index 4cd3cae38e7..30b2f400666 100644
--- a/arch/arm/mach-shmobile/intc-sh7372.c
+++ b/arch/arm/mach-shmobile/intc-sh7372.c
@@ -98,7 +98,7 @@ static struct intc_vect intca_vectors[] __initdata = {
 	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
 	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
 	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
-	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0),
 	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
 	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
 	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
new file mode 100644
index 00000000000..322d8d57cbc
--- /dev/null
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -0,0 +1,267 @@
+/*
+ * sh73a0 processor support - INTC hardware block
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sh_intc.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources INTCS */
+	PINTCS_PINT1, PINTCS_PINT2,
+	RTDMAC_0_DEI0, RTDMAC_0_DEI1, RTDMAC_0_DEI2, RTDMAC_0_DEI3,
+	CEU, MFI, BBIF2, VPU, TSIF1, _3DG_SGX543, _2DDMAC_2DDM0,
+	RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR,
+	KEYSC_KEY, VINT, MSIOF,
+	TMU0_TUNI00, TMU0_TUNI01, TMU0_TUNI02,
+	CMT0, TSIF0, CMT2, LMB, MSUG, MSU_MSU, MSU_MSU2,
+	CTI, RWDT0, ICB, PEP, ASA, JPU_JPEG, LCDC, LCRC,
+	RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
+	RTDMAC_3_DEI10, RTDMAC_3_DEI11,
+	FRC, GCU, LCDC1, CSIRX,
+	DSITX0_DSITX00, DSITX0_DSITX01,
+	SPU2_SPU0, SPU2_SPU1, FSI,
+	TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12,
+	TSIF2, CMT4, MFIS2, CPORTS2R, TSG, DMASCH1, SCUW,
+	VIO60, VIO61, CEU21, CSI21, DSITX1_DSITX10, DSITX1_DSITX11,
+	DISP, DSRV, EMUX2_EMUX20I, EMUX2_EMUX21I,
+	MSTIF0_MST00I, MSTIF0_MST01I, MSTIF1_MST10I, MSTIF1_MST11I,
+	SPUV,
+
+	/* interrupt groups INTCS */
+	RTDMAC_0, RTDMAC_1, RTDMAC_2, RTDMAC_3,
+	DSITX0, SPU2, TMU1, MSU,
+};
+
+static struct intc_vect intcs_vectors[] = {
+	INTCS_VECT(PINTCS_PINT1, 0x0600), INTCS_VECT(PINTCS_PINT2, 0x0620),
+	INTCS_VECT(RTDMAC_0_DEI0, 0x0800), INTCS_VECT(RTDMAC_0_DEI1, 0x0820),
+	INTCS_VECT(RTDMAC_0_DEI2, 0x0840), INTCS_VECT(RTDMAC_0_DEI3, 0x0860),
+	INTCS_VECT(CEU, 0x0880), INTCS_VECT(MFI, 0x0900),
+	INTCS_VECT(BBIF2, 0x0960), INTCS_VECT(VPU, 0x0980),
+	INTCS_VECT(TSIF1, 0x09a0), INTCS_VECT(_3DG_SGX543, 0x09e0),
+	INTCS_VECT(_2DDMAC_2DDM0, 0x0a00),
+	INTCS_VECT(RTDMAC_1_DEI4, 0x0b80), INTCS_VECT(RTDMAC_1_DEI5, 0x0ba0),
+	INTCS_VECT(RTDMAC_1_DADERR, 0x0bc0),
+	INTCS_VECT(KEYSC_KEY, 0x0be0), INTCS_VECT(VINT, 0x0c80),
+	INTCS_VECT(MSIOF, 0x0d20),
+	INTCS_VECT(TMU0_TUNI00, 0x0e80), INTCS_VECT(TMU0_TUNI01, 0x0ea0),
+	INTCS_VECT(TMU0_TUNI02, 0x0ec0),
+	INTCS_VECT(CMT0, 0x0f00), INTCS_VECT(TSIF0, 0x0f20),
+	INTCS_VECT(CMT2, 0x0f40), INTCS_VECT(LMB, 0x0f60),
+	INTCS_VECT(MSUG, 0x0f80),
+	INTCS_VECT(MSU_MSU, 0x0fa0), INTCS_VECT(MSU_MSU2, 0x0fc0),
+	INTCS_VECT(CTI, 0x0400), INTCS_VECT(RWDT0, 0x0440),
+	INTCS_VECT(ICB, 0x0480), INTCS_VECT(PEP, 0x04a0),
+	INTCS_VECT(ASA, 0x04c0), INTCS_VECT(JPU_JPEG, 0x0560),
+	INTCS_VECT(LCDC, 0x0580), INTCS_VECT(LCRC, 0x05a0),
+	INTCS_VECT(RTDMAC_2_DEI6, 0x1300), INTCS_VECT(RTDMAC_2_DEI7, 0x1320),
+	INTCS_VECT(RTDMAC_2_DEI8, 0x1340), INTCS_VECT(RTDMAC_2_DEI9, 0x1360),
+	INTCS_VECT(RTDMAC_3_DEI10, 0x1380), INTCS_VECT(RTDMAC_3_DEI11, 0x13a0),
+	INTCS_VECT(FRC, 0x1700), INTCS_VECT(GCU, 0x1760),
+	INTCS_VECT(LCDC1, 0x1780), INTCS_VECT(CSIRX, 0x17a0),
+	INTCS_VECT(DSITX0_DSITX00, 0x17c0), INTCS_VECT(DSITX0_DSITX01, 0x17e0),
+	INTCS_VECT(SPU2_SPU0, 0x1800), INTCS_VECT(SPU2_SPU1, 0x1820),
+	INTCS_VECT(FSI, 0x1840),
+	INTCS_VECT(TMU1_TUNI10, 0x1900), INTCS_VECT(TMU1_TUNI11, 0x1920),
+	INTCS_VECT(TMU1_TUNI12, 0x1940),
+	INTCS_VECT(TSIF2, 0x1960), INTCS_VECT(CMT4, 0x1980),
+	INTCS_VECT(MFIS2, 0x1a00), INTCS_VECT(CPORTS2R, 0x1a20),
+	INTCS_VECT(TSG, 0x1ae0), INTCS_VECT(DMASCH1, 0x1b00),
+	INTCS_VECT(SCUW, 0x1b40),
+	INTCS_VECT(VIO60, 0x1b60), INTCS_VECT(VIO61, 0x1b80),
+	INTCS_VECT(CEU21, 0x1ba0), INTCS_VECT(CSI21, 0x1be0),
+	INTCS_VECT(DSITX1_DSITX10, 0x1c00), INTCS_VECT(DSITX1_DSITX11, 0x1c20),
+	INTCS_VECT(DISP, 0x1c40), INTCS_VECT(DSRV, 0x1c60),
+	INTCS_VECT(EMUX2_EMUX20I, 0x1c80), INTCS_VECT(EMUX2_EMUX21I, 0x1ca0),
+	INTCS_VECT(MSTIF0_MST00I, 0x1cc0), INTCS_VECT(MSTIF0_MST01I, 0x1ce0),
+	INTCS_VECT(MSTIF1_MST10I, 0x1d00), INTCS_VECT(MSTIF1_MST11I, 0x1d20),
+	INTCS_VECT(SPUV, 0x2300),
+};
+
+static struct intc_group intcs_groups[] __initdata = {
+	INTC_GROUP(RTDMAC_0, RTDMAC_0_DEI0, RTDMAC_0_DEI1,
+		   RTDMAC_0_DEI2, RTDMAC_0_DEI3),
+	INTC_GROUP(RTDMAC_1, RTDMAC_1_DEI4, RTDMAC_1_DEI5, RTDMAC_1_DADERR),
+	INTC_GROUP(RTDMAC_2, RTDMAC_2_DEI6, RTDMAC_2_DEI7,
+		   RTDMAC_2_DEI8, RTDMAC_2_DEI9),
+	INTC_GROUP(RTDMAC_3, RTDMAC_3_DEI10, RTDMAC_3_DEI11),
+	INTC_GROUP(TMU1, TMU1_TUNI12, TMU1_TUNI11, TMU1_TUNI10),
+	INTC_GROUP(DSITX0, DSITX0_DSITX00, DSITX0_DSITX01),
+	INTC_GROUP(SPU2, SPU2_SPU0, SPU2_SPU1),
+	INTC_GROUP(MSU, MSU_MSU, MSU_MSU2),
+};
+
+static struct intc_mask_reg intcs_mask_registers[] = {
+	{ 0xffd20184, 0xffd201c4, 8, /* IMR1SA / IMCR1SA */
+	  { 0, 0, 0, CEU,
+	    0, 0, 0, 0 } },
+	{ 0xffd20188, 0xffd201c8, 8, /* IMR2SA / IMCR2SA */
+	  { 0, 0, 0, VPU,
+	    BBIF2, 0, 0, MFI } },
+	{ 0xffd2018c, 0xffd201cc, 8, /* IMR3SA / IMCR3SA */
+	  { 0, 0, 0, _2DDMAC_2DDM0,
+	    0, ASA, PEP, ICB } },
+	{ 0xffd20190, 0xffd201d0, 8, /* IMR4SA / IMCR4SA */
+	  { 0, 0, 0, CTI,
+	    JPU_JPEG, 0, LCRC, LCDC } },
+	{ 0xffd20194, 0xffd201d4, 8, /* IMR5SA / IMCR5SA */
+	  { KEYSC_KEY, RTDMAC_1_DADERR, RTDMAC_1_DEI5, RTDMAC_1_DEI4,
+	    RTDMAC_0_DEI3, RTDMAC_0_DEI2, RTDMAC_0_DEI1, RTDMAC_0_DEI0 } },
+	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
+	  { 0, 0, MSIOF, 0,
+	    _3DG_SGX543, 0, 0, 0 } },
+	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
+	  { 0, TMU0_TUNI02, TMU0_TUNI01, TMU0_TUNI00,
+	    0, 0, 0, 0 } },
+	{ 0xffd201a0, 0xffd201e0, 8, /* IMR8SA / IMCR8SA */
+	  { 0, 0, 0, 0,
+	    0, MSU_MSU, MSU_MSU2, MSUG } },
+	{ 0xffd201a4, 0xffd201e4, 8, /* IMR9SA / IMCR9SA */
+	  { 0, RWDT0, CMT2, CMT0,
+	    0, 0, 0, 0 } },
+	{ 0xffd201ac, 0xffd201ec, 8, /* IMR11SA / IMCR11SA */
+	  { 0, 0, 0, 0,
+	    0, TSIF1, LMB, TSIF0 } },
+	{ 0xffd201b0, 0xffd201f0, 8, /* IMR12SA / IMCR12SA */
+	  { 0, 0, 0, 0,
+	    0, 0, PINTCS_PINT2, PINTCS_PINT1 } },
+	{ 0xffd50180, 0xffd501c0, 8, /* IMR0SA3 / IMCR0SA3 */
+	  { RTDMAC_2_DEI6, RTDMAC_2_DEI7, RTDMAC_2_DEI8, RTDMAC_2_DEI9,
+	    RTDMAC_3_DEI10, RTDMAC_3_DEI11, 0, 0 } },
+	{ 0xffd50190, 0xffd501d0, 8, /* IMR4SA3 / IMCR4SA3 */
+	  { FRC, 0, 0, GCU,
+	    LCDC1, CSIRX, DSITX0_DSITX00, DSITX0_DSITX01 } },
+	{ 0xffd50194, 0xffd501d4, 8, /* IMR5SA3 / IMCR5SA3 */
+	  { SPU2_SPU0, SPU2_SPU1, FSI, 0,
+	    0, 0, 0, 0 } },
+	{ 0xffd50198, 0xffd501d8, 8, /* IMR6SA3 / IMCR6SA3 */
+	  { TMU1_TUNI10, TMU1_TUNI11, TMU1_TUNI12, 0,
+	    TSIF2, CMT4, 0, 0 } },
+	{ 0xffd5019c, 0xffd501dc, 8, /* IMR7SA3 / IMCR7SA3 */
+	  { MFIS2, CPORTS2R, 0, 0,
+	    0, 0, 0, TSG } },
+	{ 0xffd501a0, 0xffd501e0, 8, /* IMR8SA3 / IMCR8SA3 */
+	  { DMASCH1, 0, SCUW, VIO60,
+	    VIO61, CEU21, 0, CSI21 } },
+	{ 0xffd501a4, 0xffd501e4, 8, /* IMR9SA3 / IMCR9SA3 */
+	  { DSITX1_DSITX10, DSITX1_DSITX11, DISP, DSRV,
+	    EMUX2_EMUX20I, EMUX2_EMUX21I, MSTIF0_MST00I, MSTIF0_MST01I } },
+	{ 0xffd501a8, 0xffd501e8, 8, /* IMR10SA3 / IMCR10SA3 */
+	  { MSTIF0_MST00I, MSTIF0_MST01I, 0, 0,
+	    0, 0, 0, 0  } },
+	{ 0xffd60180, 0xffd601c0, 8, /* IMR0SA4 / IMCR0SA4 */
+	  { SPUV, 0, 0, 0,
+	    0, 0, 0, 0  } },
+};
+
+/* Priority is needed for INTCA to receive the INTCS interrupt */
+static struct intc_prio_reg intcs_prio_registers[] = {
+	{ 0xffd20000, 0, 16, 4, /* IPRAS */ { CTI, 0, _2DDMAC_2DDM0, ICB } },
+	{ 0xffd20004, 0, 16, 4, /* IPRBS */ { JPU_JPEG, LCDC, 0, LCRC } },
+	{ 0xffd20008, 0, 16, 4, /* IPRCS */ { BBIF2, 0, 0, 0 } },
+	{ 0xffd2000c, 0, 16, 4, /* IPRDS */ { PINTCS_PINT1, PINTCS_PINT2,
+					      0, 0 } },
+	{ 0xffd20010, 0, 16, 4, /* IPRES */ { RTDMAC_0, CEU, MFI, VPU } },
+	{ 0xffd20014, 0, 16, 4, /* IPRFS */ { KEYSC_KEY, RTDMAC_1,
+					      CMT2, CMT0 } },
+	{ 0xffd20018, 0, 16, 4, /* IPRGS */ { TMU0_TUNI00, TMU0_TUNI01,
+					      TMU0_TUNI02, TSIF1 } },
+	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { VINT, 0, 0, 0 } },
+	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, 0 } },
+	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX543, MSUG, MSU } },
+	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, ASA, LMB, PEP } },
+	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { 0, 0, 0, RWDT0 } },
+	{ 0xffd50000, 0, 16, 4, /* IPRAS3 */ { RTDMAC_2, 0, 0, 0 } },
+	{ 0xffd50004, 0, 16, 4, /* IPRBS3 */ { RTDMAC_3, 0, 0, 0 } },
+	{ 0xffd50020, 0, 16, 4, /* IPRIS3 */ { FRC, 0, 0, 0 } },
+	{ 0xffd50024, 0, 16, 4, /* IPRJS3 */ { LCDC1, CSIRX, DSITX0, 0 } },
+	{ 0xffd50028, 0, 16, 4, /* IPRKS3 */ { SPU2, 0, FSI, 0 } },
+	{ 0xffd50030, 0, 16, 4, /* IPRMS3 */ { TMU1, 0, 0, TSIF2 } },
+	{ 0xffd50034, 0, 16, 4, /* IPRNS3 */ { CMT4, 0, 0, 0 } },
+	{ 0xffd50038, 0, 16, 4, /* IPROS3 */ { MFIS2, CPORTS2R, 0, 0 } },
+	{ 0xffd50040, 0, 16, 4, /* IPRQS3 */ { DMASCH1, 0, SCUW, VIO60 } },
+	{ 0xffd50044, 0, 16, 4, /* IPRRS3 */ { VIO61, CEU21, 0, CSI21 } },
+	{ 0xffd50048, 0, 16, 4, /* IPRSS3 */ { DSITX1_DSITX10, DSITX1_DSITX11,
+					       DISP, DSRV } },
+	{ 0xffd5004c, 0, 16, 4, /* IPRTS3 */ { EMUX2_EMUX20I, EMUX2_EMUX21I,
+					       MSTIF0_MST00I, MSTIF0_MST01I } },
+	{ 0xffd50050, 0, 16, 4, /* IPRUS3 */ { MSTIF1_MST10I, MSTIF1_MST11I,
+					       0, 0 } },
+	{ 0xffd60000, 0, 16, 4, /* IPRAS4 */ { SPUV, 0, 0, 0 } },
+};
+
+static struct resource intcs_resources[] __initdata = {
+	[0] = {
+		.start	= 0xffd20000,
+		.end	= 0xffd201ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0xffd50000,
+		.end	= 0xffd501ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= 0xffd60000,
+		.end	= 0xffd601ff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct intc_desc intcs_desc __initdata = {
+	.name = "sh73a0-intcs",
+	.resource = intcs_resources,
+	.num_resources = ARRAY_SIZE(intcs_resources),
+	.hw = INTC_HW_DESC(intcs_vectors, intcs_groups, intcs_mask_registers,
+			   intcs_prio_registers, NULL, NULL),
+};
+
+static struct irqaction sh73a0_intcs_cascade;
+
+static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
+{
+	unsigned int evtcodeas = ioread32((void __iomem *)dev_id);
+
+	generic_handle_irq(intcs_evt2irq(evtcodeas));
+
+	return IRQ_HANDLED;
+}
+
+void __init sh73a0_init_irq(void)
+{
+	void __iomem *gic_base = __io(0xf0001000);
+	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
+
+	gic_init(0, 29, gic_base, gic_base);
+
+	register_intc_controller(&intcs_desc);
+
+	/* demux using INTEVTSA */
+	sh73a0_intcs_cascade.name = "INTCS cascade";
+	sh73a0_intcs_cascade.handler = sh73a0_intcs_demux;
+	sh73a0_intcs_cascade.dev_id = intevtsa;
+	setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
+}
diff --git a/arch/arm/mach-shmobile/localtimer.c b/arch/arm/mach-shmobile/localtimer.c
new file mode 100644
index 00000000000..2111c28b724
--- /dev/null
+++ b/arch/arm/mach-shmobile/localtimer.c
@@ -0,0 +1,25 @@
+/*
+ * SMP support for R-Mobile / SH-Mobile - local timer portion
+ *
+ * Copyright (C) 2010  Magnus Damm
+ *
+ * Based on vexpress, Copyright (C) 2002 ARM Ltd, All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = 29;
+	twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
new file mode 100644
index 00000000000..3eed44eb98b
--- /dev/null
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -0,0 +1,2746 @@
+/*
+ * sh73a0 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ * Copyright (C) 2010 NISHIMOTO Hiroki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <mach/sh73a0.h>
+
+#define _1(fn, pfx, sfx) fn(pfx, sfx)
+
+#define _10(fn, pfx, sfx)				\
+	_1(fn, pfx##0, sfx), _1(fn, pfx##1, sfx),	\
+	_1(fn, pfx##2, sfx), _1(fn, pfx##3, sfx),	\
+	_1(fn, pfx##4, sfx), _1(fn, pfx##5, sfx),	\
+	_1(fn, pfx##6, sfx), _1(fn, pfx##7, sfx),	\
+	_1(fn, pfx##8, sfx), _1(fn, pfx##9, sfx)
+
+#define _310(fn, pfx, sfx)				\
+	_10(fn, pfx,    sfx), _10(fn, pfx##1, sfx),	\
+	_10(fn, pfx##2, sfx), _10(fn, pfx##3, sfx),	\
+	_10(fn, pfx##4, sfx), _10(fn, pfx##5, sfx),	\
+	_10(fn, pfx##6, sfx), _10(fn, pfx##7, sfx),	\
+	_10(fn, pfx##8, sfx), _10(fn, pfx##9, sfx),	\
+	_10(fn, pfx##10, sfx),				\
+	_1(fn, pfx##110, sfx), _1(fn, pfx##111, sfx),	\
+	_1(fn, pfx##112, sfx), _1(fn, pfx##113, sfx),	\
+	_1(fn, pfx##114, sfx), _1(fn, pfx##115, sfx),	\
+	_1(fn, pfx##116, sfx), _1(fn, pfx##117, sfx),	\
+	_1(fn, pfx##118, sfx),				\
+	_1(fn, pfx##128, sfx), _1(fn, pfx##129, sfx),	\
+	_10(fn, pfx##13, sfx), _10(fn, pfx##14, sfx),	\
+	_10(fn, pfx##15, sfx),				\
+	_1(fn, pfx##160, sfx), _1(fn, pfx##161, sfx),	\
+	_1(fn, pfx##162, sfx), _1(fn, pfx##163, sfx),	\
+	_1(fn, pfx##164, sfx),				\
+	_1(fn, pfx##192, sfx), _1(fn, pfx##193, sfx),	\
+	_1(fn, pfx##194, sfx), _1(fn, pfx##195, sfx),	\
+	_1(fn, pfx##196, sfx), _1(fn, pfx##197, sfx),	\
+	_1(fn, pfx##198, sfx), _1(fn, pfx##199, sfx),	\
+	_10(fn, pfx##20, sfx), _10(fn, pfx##21, sfx),	\
+	_10(fn, pfx##22, sfx), _10(fn, pfx##23, sfx),	\
+	_10(fn, pfx##24, sfx), _10(fn, pfx##25, sfx),	\
+	_10(fn, pfx##26, sfx), _10(fn, pfx##27, sfx),	\
+	_1(fn, pfx##280, sfx), _1(fn, pfx##281, sfx),	\
+	_1(fn, pfx##282, sfx),				\
+	_1(fn, pfx##288, sfx), _1(fn, pfx##289, sfx),	\
+	_10(fn, pfx##29, sfx), _10(fn, pfx##30, sfx)
+
+#define _PORT(pfx, sfx) pfx##_##sfx
+#define PORT_310(str) _310(_PORT, PORT, str)
+
+enum {
+	PINMUX_RESERVED = 0,
+
+	PINMUX_DATA_BEGIN,
+	PORT_310(DATA),			/* PORT0_DATA -> PORT309_DATA */
+	PINMUX_DATA_END,
+
+	PINMUX_INPUT_BEGIN,
+	PORT_310(IN),			/* PORT0_IN -> PORT309_IN */
+	PINMUX_INPUT_END,
+
+	PINMUX_INPUT_PULLUP_BEGIN,
+	PORT_310(IN_PU),		/* PORT0_IN_PU -> PORT309_IN_PU */
+	PINMUX_INPUT_PULLUP_END,
+
+	PINMUX_INPUT_PULLDOWN_BEGIN,
+	PORT_310(IN_PD),		/* PORT0_IN_PD -> PORT309_IN_PD */
+	PINMUX_INPUT_PULLDOWN_END,
+
+	PINMUX_OUTPUT_BEGIN,
+	PORT_310(OUT),			/* PORT0_OUT -> PORT309_OUT */
+	PINMUX_OUTPUT_END,
+
+	PINMUX_FUNCTION_BEGIN,
+	PORT_310(FN_IN),		/* PORT0_FN_IN -> PORT309_FN_IN */
+	PORT_310(FN_OUT),		/* PORT0_FN_OUT -> PORT309_FN_OUT */
+	PORT_310(FN0),			/* PORT0_FN0 -> PORT309_FN0 */
+	PORT_310(FN1),			/* PORT0_FN1 -> PORT309_FN1 */
+	PORT_310(FN2),			/* PORT0_FN2 -> PORT309_FN2 */
+	PORT_310(FN3),			/* PORT0_FN3 -> PORT309_FN3 */
+	PORT_310(FN4),			/* PORT0_FN4 -> PORT309_FN4 */
+	PORT_310(FN5),			/* PORT0_FN5 -> PORT309_FN5 */
+	PORT_310(FN6),			/* PORT0_FN6 -> PORT309_FN6 */
+	PORT_310(FN7),			/* PORT0_FN7 -> PORT309_FN7 */
+
+	MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
+	MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
+	MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1,
+	MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1,
+	MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1,
+	MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1,
+	MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1,
+	MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1,
+	MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1,
+	MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1,
+	MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1,
+	MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1,
+	MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1,
+	MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1,
+	MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1,
+	MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1,
+	MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1,
+	MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1,
+	MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1,
+	MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1,
+	MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1,
+	MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1,
+	MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1,
+	MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1,
+	MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1,
+	MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1,
+	MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1,
+	MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1,
+	MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1,
+	MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1,
+	MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1,
+	MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1,
+	MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1,
+	MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1,
+	MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1,
+	MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1,
+	MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1,
+	MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1,
+	MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1,
+	MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1,
+	MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1,
+	MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1,
+	PINMUX_FUNCTION_END,
+
+	PINMUX_MARK_BEGIN,
+	/* Hardware manual Table 25-1 (Function 0-7) */
+	VBUS_0_MARK,
+	GPI0_MARK,
+	GPI1_MARK,
+	GPI2_MARK,
+	GPI3_MARK,
+	GPI4_MARK,
+	GPI5_MARK,
+	GPI6_MARK,
+	GPI7_MARK,
+	SCIFA7_RXD_MARK,
+	SCIFA7_CTS__MARK,
+	GPO7_MARK, MFG0_OUT2_MARK,
+	GPO6_MARK, MFG1_OUT2_MARK,
+	GPO5_MARK, SCIFA0_SCK_MARK, FSICOSLDT3_MARK, PORT16_VIO_CKOR_MARK,
+	SCIFA0_TXD_MARK,
+	SCIFA7_TXD_MARK,
+	SCIFA7_RTS__MARK, PORT19_VIO_CKO2_MARK,
+	GPO0_MARK,
+	GPO1_MARK,
+	GPO2_MARK, STATUS0_MARK,
+	GPO3_MARK, STATUS1_MARK,
+	GPO4_MARK, STATUS2_MARK,
+	VINT_MARK,
+	TCKON_MARK,
+	XDVFS1_MARK, PORT27_I2C_SCL2_MARK, PORT27_I2C_SCL3_MARK, \
+	MFG0_OUT1_MARK, PORT27_IROUT_MARK,
+	XDVFS2_MARK, PORT28_I2C_SDA2_MARK, PORT28_I2C_SDA3_MARK, \
+	PORT28_TPU1TO1_MARK,
+	SIM_RST_MARK, PORT29_TPU1TO1_MARK,
+	SIM_CLK_MARK, PORT30_VIO_CKOR_MARK,
+	SIM_D_MARK, PORT31_IROUT_MARK,
+	SCIFA4_TXD_MARK,
+	SCIFA4_RXD_MARK, XWUP_MARK,
+	SCIFA4_RTS__MARK,
+	SCIFA4_CTS__MARK,
+	FSIBOBT_MARK, FSIBIBT_MARK,
+	FSIBOLR_MARK, FSIBILR_MARK,
+	FSIBOSLD_MARK,
+	FSIBISLD_MARK,
+	VACK_MARK,
+	XTAL1L_MARK,
+	SCIFA0_RTS__MARK, FSICOSLDT2_MARK,
+	SCIFA0_RXD_MARK,
+	SCIFA0_CTS__MARK, FSICOSLDT1_MARK,
+	FSICOBT_MARK, FSICIBT_MARK, FSIDOBT_MARK, FSIDIBT_MARK,
+	FSICOLR_MARK, FSICILR_MARK, FSIDOLR_MARK, FSIDILR_MARK,
+	FSICOSLD_MARK, PORT47_FSICSPDIF_MARK,
+	FSICISLD_MARK, FSIDISLD_MARK,
+	FSIACK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, FSIAOMC_MARK,
+	FSIAOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, FSIAILR_MARK,
+
+	FSIAOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, FSIAIBT_MARK,
+	FSIAOSLD_MARK, BBIF2_TXD2_MARK,
+	FSIASPDIF_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, FSIBSPDIF_MARK, \
+	PORT53_FSICSPDIF_MARK,
+	FSIBCK_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FSIBOMC_MARK, \
+	FSICCK_MARK, FSICOMC_MARK,
+	FSIAISLD_MARK, TPU0TO0_MARK,
+	A0_MARK, BS__MARK,
+	A12_MARK, PORT58_KEYOUT7_MARK, TPU4TO2_MARK,
+	A13_MARK, PORT59_KEYOUT6_MARK, TPU0TO1_MARK,
+	A14_MARK, KEYOUT5_MARK,
+	A15_MARK, KEYOUT4_MARK,
+	A16_MARK, KEYOUT3_MARK, MSIOF0_SS1_MARK,
+	A17_MARK, KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
+	A18_MARK, KEYOUT1_MARK, MSIOF0_TSCK_MARK,
+	A19_MARK, KEYOUT0_MARK, MSIOF0_TXD_MARK,
+	A20_MARK, KEYIN0_MARK, MSIOF0_RSCK_MARK,
+	A21_MARK, KEYIN1_MARK, MSIOF0_RSYNC_MARK,
+	A22_MARK, KEYIN2_MARK, MSIOF0_MCK0_MARK,
+	A23_MARK, KEYIN3_MARK, MSIOF0_MCK1_MARK,
+	A24_MARK, KEYIN4_MARK, MSIOF0_RXD_MARK,
+	A25_MARK, KEYIN5_MARK, MSIOF0_SS2_MARK,
+	A26_MARK, KEYIN6_MARK,
+	KEYIN7_MARK,
+	D0_NAF0_MARK,
+	D1_NAF1_MARK,
+	D2_NAF2_MARK,
+	D3_NAF3_MARK,
+	D4_NAF4_MARK,
+	D5_NAF5_MARK,
+	D6_NAF6_MARK,
+	D7_NAF7_MARK,
+	D8_NAF8_MARK,
+	D9_NAF9_MARK,
+	D10_NAF10_MARK,
+	D11_NAF11_MARK,
+	D12_NAF12_MARK,
+	D13_NAF13_MARK,
+	D14_NAF14_MARK,
+	D15_NAF15_MARK,
+	CS4__MARK,
+	CS5A__MARK, PORT91_RDWR_MARK,
+	CS5B__MARK, FCE1__MARK,
+	CS6B__MARK, DACK0_MARK,
+	FCE0__MARK, CS6A__MARK,
+	WAIT__MARK, DREQ0_MARK,
+	RD__FSC_MARK,
+	WE0__FWE_MARK, RDWR_FWE_MARK,
+	WE1__MARK,
+	FRB_MARK,
+	CKO_MARK,
+	NBRSTOUT__MARK,
+	NBRST__MARK,
+	BBIF2_TXD_MARK,
+	BBIF2_RXD_MARK,
+	BBIF2_SYNC_MARK,
+	BBIF2_SCK_MARK,
+	SCIFA3_CTS__MARK, MFG3_IN2_MARK,
+	SCIFA3_RXD_MARK, MFG3_IN1_MARK,
+	BBIF1_SS2_MARK, SCIFA3_RTS__MARK, MFG3_OUT1_MARK,
+	SCIFA3_TXD_MARK,
+	HSI_RX_DATA_MARK, BBIF1_RXD_MARK,
+	HSI_TX_WAKE_MARK, BBIF1_TSCK_MARK,
+	HSI_TX_DATA_MARK, BBIF1_TSYNC_MARK,
+	HSI_TX_READY_MARK, BBIF1_TXD_MARK,
+	HSI_RX_READY_MARK, BBIF1_RSCK_MARK, PORT115_I2C_SCL2_MARK, \
+	PORT115_I2C_SCL3_MARK,
+	HSI_RX_WAKE_MARK, BBIF1_RSYNC_MARK, PORT116_I2C_SDA2_MARK, \
+	PORT116_I2C_SDA3_MARK,
+	HSI_RX_FLAG_MARK, BBIF1_SS1_MARK, BBIF1_FLOW_MARK,
+	HSI_TX_FLAG_MARK,
+	VIO_VD_MARK, PORT128_LCD2VSYN_MARK, VIO2_VD_MARK, LCD2D0_MARK,
+
+	VIO_HD_MARK, PORT129_LCD2HSYN_MARK, PORT129_LCD2CS__MARK, \
+	VIO2_HD_MARK, LCD2D1_MARK,
+	VIO_D0_MARK, PORT130_MSIOF2_RXD_MARK, LCD2D10_MARK,
+	VIO_D1_MARK, PORT131_KEYOUT6_MARK, PORT131_MSIOF2_SS1_MARK, \
+	PORT131_KEYOUT11_MARK, LCD2D11_MARK,
+	VIO_D2_MARK, PORT132_KEYOUT7_MARK, PORT132_MSIOF2_SS2_MARK, \
+	PORT132_KEYOUT10_MARK, LCD2D12_MARK,
+	VIO_D3_MARK, MSIOF2_TSYNC_MARK, LCD2D13_MARK,
+	VIO_D4_MARK, MSIOF2_TXD_MARK, LCD2D14_MARK,
+	VIO_D5_MARK, MSIOF2_TSCK_MARK, LCD2D15_MARK,
+	VIO_D6_MARK, PORT136_KEYOUT8_MARK, LCD2D16_MARK,
+	VIO_D7_MARK, PORT137_KEYOUT9_MARK, LCD2D17_MARK,
+	VIO_D8_MARK, PORT138_KEYOUT8_MARK, VIO2_D0_MARK, LCD2D6_MARK,
+	VIO_D9_MARK, PORT139_KEYOUT9_MARK, VIO2_D1_MARK, LCD2D7_MARK,
+	VIO_D10_MARK, TPU0TO2_MARK, VIO2_D2_MARK, LCD2D8_MARK,
+	VIO_D11_MARK, TPU0TO3_MARK, VIO2_D3_MARK, LCD2D9_MARK,
+	VIO_D12_MARK, PORT142_KEYOUT10_MARK, VIO2_D4_MARK, LCD2D2_MARK,
+	VIO_D13_MARK, PORT143_KEYOUT11_MARK, PORT143_KEYOUT6_MARK, \
+	VIO2_D5_MARK, LCD2D3_MARK,
+	VIO_D14_MARK, PORT144_KEYOUT7_MARK, VIO2_D6_MARK, LCD2D4_MARK,
+	VIO_D15_MARK, TPU1TO3_MARK, PORT145_LCD2DISP_MARK, \
+	PORT145_LCD2RS_MARK, VIO2_D7_MARK, LCD2D5_MARK,
+	VIO_CLK_MARK, LCD2DCK_MARK, PORT146_LCD2WR__MARK, VIO2_CLK_MARK, \
+	LCD2D18_MARK,
+	VIO_FIELD_MARK, LCD2RD__MARK, VIO2_FIELD_MARK, LCD2D19_MARK,
+	VIO_CKO_MARK,
+	A27_MARK, PORT149_RDWR_MARK, MFG0_IN1_MARK, PORT149_KEYOUT9_MARK,
+	MFG0_IN2_MARK,
+	TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
+	TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
+	TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
+	SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
+	SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
+	SCIFA2_RTS1__MARK, PORT156_MSIOF2_SS2_MARK,
+	SCIFA2_CTS1__MARK, PORT157_MSIOF2_RXD_MARK,
+	DINT__MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+	PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
+	PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK,
+	PORT161_SCIFB_CTS__MARK, PORT161_SCIFA5_CTS__MARK,
+	PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK,
+	PORT163_SCIFB_RTS__MARK, PORT163_SCIFA5_RTS__MARK, TPU3TO0_MARK,
+	LCDD0_MARK,
+	LCDD1_MARK, PORT193_SCIFA5_CTS__MARK, BBIF2_TSYNC1_MARK,
+	LCDD2_MARK, PORT194_SCIFA5_RTS__MARK, BBIF2_TSCK1_MARK,
+	LCDD3_MARK, PORT195_SCIFA5_RXD_MARK, BBIF2_TXD1_MARK,
+	LCDD4_MARK, PORT196_SCIFA5_TXD_MARK,
+	LCDD5_MARK, PORT197_SCIFA5_SCK_MARK, MFG2_OUT2_MARK, TPU2TO1_MARK,
+	LCDD6_MARK,
+	LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK,
+	LCDD8_MARK, D16_MARK,
+	LCDD9_MARK, D17_MARK,
+	LCDD10_MARK, D18_MARK,
+	LCDD11_MARK, D19_MARK,
+	LCDD12_MARK, D20_MARK,
+	LCDD13_MARK, D21_MARK,
+	LCDD14_MARK, D22_MARK,
+	LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, D23_MARK,
+	LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, D24_MARK,
+	LCDD17_MARK, D25_MARK,
+	LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK,
+	LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK,
+	LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK,
+	LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK,
+	LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK,
+	LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK,
+	LCDDCK_MARK, LCDWR__MARK,
+	LCDRD__MARK, DACK2_MARK, PORT217_LCD2RS_MARK, MSIOF0L_TSYNC_MARK, \
+	VIO2_FIELD3_MARK, PORT217_LCD2DISP_MARK,
+	LCDHSYN_MARK, LCDCS__MARK, LCDCS2__MARK, DACK3_MARK, \
+	PORT218_VIO_CKOR_MARK,
+	LCDDISP_MARK, LCDRS_MARK, PORT219_LCD2WR__MARK, DREQ3_MARK, \
+	MSIOF0L_TSCK_MARK, VIO2_CLK3_MARK, LCD2DCK_2_MARK,
+	LCDVSYN_MARK, LCDVSYN2_MARK,
+	LCDLCLK_MARK, DREQ1_MARK, PORT221_LCD2CS__MARK, PWEN_MARK, \
+	MSIOF0L_RXD_MARK, VIO2_HD3_MARK, PORT221_LCD2HSYN_MARK,
+	LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, \
+	VIO2_VD3_MARK, PORT222_LCD2VSYN_MARK,
+
+	SCIFA1_TXD_MARK, OVCN2_MARK,
+	EXTLP_MARK, SCIFA1_SCK_MARK, PORT226_VIO_CKO2_MARK,
+	SCIFA1_RTS__MARK, IDIN_MARK,
+	SCIFA1_RXD_MARK,
+	SCIFA1_CTS__MARK, MFG1_IN1_MARK,
+	MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK,
+	MSIOF1_TSYNC_MARK, SCIFA2_CTS2__MARK,
+	MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK,
+	MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK,
+	MSIOF1_RSCK_MARK, SCIFA2_RTS2__MARK, VIO2_CLK2_MARK, LCD2D20_MARK,
+	MSIOF1_RSYNC_MARK, MFG1_IN2_MARK, VIO2_VD2_MARK, LCD2D21_MARK,
+	MSIOF1_MCK0_MARK, PORT236_I2C_SDA2_MARK,
+	MSIOF1_MCK1_MARK, PORT237_I2C_SCL2_MARK,
+	MSIOF1_SS1_MARK, VIO2_FIELD2_MARK, LCD2D22_MARK,
+	MSIOF1_SS2_MARK, VIO2_HD2_MARK, LCD2D23_MARK,
+	SCIFA6_TXD_MARK,
+	PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, TPU4TO0_MARK,
+	PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
+	PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
+	PORT244_SCIFA5_CTS__MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS__MARK, \
+	MSIOF2R_RXD_MARK,
+	PORT245_SCIFA5_RTS__MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS__MARK, \
+	MSIOF2R_TXD_MARK,
+	PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, \
+	TPU1TO0_MARK,
+	PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, \
+	TPU3TO1_MARK,
+	PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, \
+	TPU2TO0_MARK, PORT248_I2C_SCL3_MARK, MSIOF2R_TSCK_MARK,
+	PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_I2C_SDA3_MARK, \
+	MSIOF2R_TSYNC_MARK,
+	SDHICLK0_MARK,
+	SDHICD0_MARK,
+	SDHID0_0_MARK,
+	SDHID0_1_MARK,
+	SDHID0_2_MARK,
+	SDHID0_3_MARK,
+	SDHICMD0_MARK,
+	SDHIWP0_MARK,
+	SDHICLK1_MARK,
+	SDHID1_0_MARK, TS_SPSYNC2_MARK,
+	SDHID1_1_MARK, TS_SDAT2_MARK,
+	SDHID1_2_MARK, TS_SDEN2_MARK,
+	SDHID1_3_MARK, TS_SCK2_MARK,
+	SDHICMD1_MARK,
+	SDHICLK2_MARK,
+	SDHID2_0_MARK, TS_SPSYNC4_MARK,
+	SDHID2_1_MARK, TS_SDAT4_MARK,
+	SDHID2_2_MARK, TS_SDEN4_MARK,
+	SDHID2_3_MARK, TS_SCK4_MARK,
+	SDHICMD2_MARK,
+	MMCCLK0_MARK,
+	MMCD0_0_MARK,
+	MMCD0_1_MARK,
+	MMCD0_2_MARK,
+	MMCD0_3_MARK,
+	MMCD0_4_MARK, TS_SPSYNC5_MARK,
+	MMCD0_5_MARK, TS_SDAT5_MARK,
+	MMCD0_6_MARK, TS_SDEN5_MARK,
+	MMCD0_7_MARK, TS_SCK5_MARK,
+	MMCCMD0_MARK,
+	RESETOUTS__MARK, EXTAL2OUT_MARK,
+	MCP_WAIT__MCP_FRB_MARK,
+	MCP_CKO_MARK, MMCCLK1_MARK,
+	MCP_D15_MCP_NAF15_MARK,
+	MCP_D14_MCP_NAF14_MARK,
+	MCP_D13_MCP_NAF13_MARK,
+	MCP_D12_MCP_NAF12_MARK,
+	MCP_D11_MCP_NAF11_MARK,
+	MCP_D10_MCP_NAF10_MARK,
+	MCP_D9_MCP_NAF9_MARK,
+	MCP_D8_MCP_NAF8_MARK, MMCCMD1_MARK,
+	MCP_D7_MCP_NAF7_MARK, MMCD1_7_MARK,
+
+	MCP_D6_MCP_NAF6_MARK, MMCD1_6_MARK,
+	MCP_D5_MCP_NAF5_MARK, MMCD1_5_MARK,
+	MCP_D4_MCP_NAF4_MARK, MMCD1_4_MARK,
+	MCP_D3_MCP_NAF3_MARK, MMCD1_3_MARK,
+	MCP_D2_MCP_NAF2_MARK, MMCD1_2_MARK,
+	MCP_D1_MCP_NAF1_MARK, MMCD1_1_MARK,
+	MCP_D0_MCP_NAF0_MARK, MMCD1_0_MARK,
+	MCP_NBRSTOUT__MARK,
+	MCP_WE0__MCP_FWE_MARK, MCP_RDWR_MCP_FWE_MARK,
+
+	/* MSEL2 special cases */
+	TSIF2_TS_XX1_MARK,
+	TSIF2_TS_XX2_MARK,
+	TSIF2_TS_XX3_MARK,
+	TSIF2_TS_XX4_MARK,
+	TSIF2_TS_XX5_MARK,
+	TSIF1_TS_XX1_MARK,
+	TSIF1_TS_XX2_MARK,
+	TSIF1_TS_XX3_MARK,
+	TSIF1_TS_XX4_MARK,
+	TSIF1_TS_XX5_MARK,
+	TSIF0_TS_XX1_MARK,
+	TSIF0_TS_XX2_MARK,
+	TSIF0_TS_XX3_MARK,
+	TSIF0_TS_XX4_MARK,
+	TSIF0_TS_XX5_MARK,
+	MST1_TS_XX1_MARK,
+	MST1_TS_XX2_MARK,
+	MST1_TS_XX3_MARK,
+	MST1_TS_XX4_MARK,
+	MST1_TS_XX5_MARK,
+	MST0_TS_XX1_MARK,
+	MST0_TS_XX2_MARK,
+	MST0_TS_XX3_MARK,
+	MST0_TS_XX4_MARK,
+	MST0_TS_XX5_MARK,
+
+	/* MSEL3 special cases */
+	SDHI0_VCCQ_MC0_ON_MARK,
+	SDHI0_VCCQ_MC0_OFF_MARK,
+	DEBUG_MON_VIO_MARK,
+	DEBUG_MON_LCDD_MARK,
+	LCDC_LCDC0_MARK,
+	LCDC_LCDC1_MARK,
+
+	/* MSEL4 special cases */
+	IRQ9_MEM_INT_MARK,
+	IRQ9_MCP_INT_MARK,
+	A11_MARK,
+	KEYOUT8_MARK,
+	TPU4TO3_MARK,
+	RESETA_N_PU_ON_MARK,
+	RESETA_N_PU_OFF_MARK,
+	EDBGREQ_PD_MARK,
+	EDBGREQ_PU_MARK,
+
+	/* Functions with pull-ups */
+	KEYIN0_PU_MARK,
+	KEYIN1_PU_MARK,
+	KEYIN2_PU_MARK,
+	KEYIN3_PU_MARK,
+	KEYIN4_PU_MARK,
+	KEYIN5_PU_MARK,
+	KEYIN6_PU_MARK,
+	KEYIN7_PU_MARK,
+	SDHID1_0_PU_MARK,
+	SDHID1_1_PU_MARK,
+	SDHID1_2_PU_MARK,
+	SDHID1_3_PU_MARK,
+	SDHICMD1_PU_MARK,
+	MMCCMD0_PU_MARK,
+	MMCCMD1_PU_MARK,
+	FSIACK_PU_MARK,
+	FSIAILR_PU_MARK,
+	FSIAIBT_PU_MARK,
+	FSIAISLD_PU_MARK,
+
+	PINMUX_MARK_END,
+};
+
+#define PORT_DATA_I(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0, PORT##nr##_IN)
+
+#define PORT_DATA_I_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PD)
+
+#define PORT_DATA_I_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PU)
+
+#define PORT_DATA_I_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_IN, PORT##nr##_IN_PD,	\
+				PORT##nr##_IN_PU)
+
+#define PORT_DATA_O(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT)
+
+#define PORT_DATA_IO(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN)
+
+#define PORT_DATA_IO_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PD)
+
+#define PORT_DATA_IO_PU(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PU)
+
+#define PORT_DATA_IO_PU_PD(nr)	\
+	PINMUX_DATA(PORT##nr##_DATA, PORT##nr##_FN0,	\
+				PORT##nr##_OUT, PORT##nr##_IN,		\
+				PORT##nr##_IN_PD, PORT##nr##_IN_PU)
+
+static pinmux_enum_t pinmux_data[] = {
+	/* specify valid pin states for each pin in GPIO mode */
+
+	/* Table 25-1 (I/O and Pull U/D) */
+	PORT_DATA_I_PD(0),
+	PORT_DATA_I_PU(1),
+	PORT_DATA_I_PU(2),
+	PORT_DATA_I_PU(3),
+	PORT_DATA_I_PU(4),
+	PORT_DATA_I_PU(5),
+	PORT_DATA_I_PU(6),
+	PORT_DATA_I_PU(7),
+	PORT_DATA_I_PU(8),
+	PORT_DATA_I_PD(9),
+	PORT_DATA_I_PD(10),
+	PORT_DATA_I_PU_PD(11),
+	PORT_DATA_IO_PU_PD(12),
+	PORT_DATA_IO_PU_PD(13),
+	PORT_DATA_IO_PU_PD(14),
+	PORT_DATA_IO_PU_PD(15),
+	PORT_DATA_IO_PD(16),
+	PORT_DATA_IO_PD(17),
+	PORT_DATA_IO_PU(18),
+	PORT_DATA_IO_PU(19),
+	PORT_DATA_O(20),
+	PORT_DATA_O(21),
+	PORT_DATA_O(22),
+	PORT_DATA_O(23),
+	PORT_DATA_O(24),
+	PORT_DATA_I_PD(25),
+	PORT_DATA_I_PD(26),
+	PORT_DATA_IO_PU(27),
+	PORT_DATA_IO_PU(28),
+	PORT_DATA_IO_PD(29),
+	PORT_DATA_IO_PD(30),
+	PORT_DATA_IO_PU(31),
+	PORT_DATA_IO_PD(32),
+	PORT_DATA_I_PU_PD(33),
+	PORT_DATA_IO_PD(34),
+	PORT_DATA_I_PU_PD(35),
+	PORT_DATA_IO_PD(36),
+	PORT_DATA_IO(37),
+	PORT_DATA_O(38),
+	PORT_DATA_I_PU(39),
+	PORT_DATA_I_PU_PD(40),
+	PORT_DATA_O(41),
+	PORT_DATA_IO_PD(42),
+	PORT_DATA_IO_PU_PD(43),
+	PORT_DATA_IO_PU_PD(44),
+	PORT_DATA_IO_PD(45),
+	PORT_DATA_IO_PD(46),
+	PORT_DATA_IO_PD(47),
+	PORT_DATA_I_PD(48),
+	PORT_DATA_IO_PU_PD(49),
+	PORT_DATA_IO_PD(50),
+
+	PORT_DATA_IO_PD(51),
+	PORT_DATA_O(52),
+	PORT_DATA_IO_PU_PD(53),
+	PORT_DATA_IO_PU_PD(54),
+	PORT_DATA_IO_PD(55),
+	PORT_DATA_I_PU_PD(56),
+	PORT_DATA_IO(57),
+	PORT_DATA_IO(58),
+	PORT_DATA_IO(59),
+	PORT_DATA_IO(60),
+	PORT_DATA_IO(61),
+	PORT_DATA_IO_PD(62),
+	PORT_DATA_IO_PD(63),
+	PORT_DATA_IO_PU_PD(64),
+	PORT_DATA_IO_PD(65),
+	PORT_DATA_IO_PU_PD(66),
+	PORT_DATA_IO_PU_PD(67),
+	PORT_DATA_IO_PU_PD(68),
+	PORT_DATA_IO_PU_PD(69),
+	PORT_DATA_IO_PU_PD(70),
+	PORT_DATA_IO_PU_PD(71),
+	PORT_DATA_IO_PU_PD(72),
+	PORT_DATA_I_PU_PD(73),
+	PORT_DATA_IO_PU(74),
+	PORT_DATA_IO_PU(75),
+	PORT_DATA_IO_PU(76),
+	PORT_DATA_IO_PU(77),
+	PORT_DATA_IO_PU(78),
+	PORT_DATA_IO_PU(79),
+	PORT_DATA_IO_PU(80),
+	PORT_DATA_IO_PU(81),
+	PORT_DATA_IO_PU(82),
+	PORT_DATA_IO_PU(83),
+	PORT_DATA_IO_PU(84),
+	PORT_DATA_IO_PU(85),
+	PORT_DATA_IO_PU(86),
+	PORT_DATA_IO_PU(87),
+	PORT_DATA_IO_PU(88),
+	PORT_DATA_IO_PU(89),
+	PORT_DATA_O(90),
+	PORT_DATA_IO_PU(91),
+	PORT_DATA_O(92),
+	PORT_DATA_IO_PU(93),
+	PORT_DATA_O(94),
+	PORT_DATA_I_PU_PD(95),
+	PORT_DATA_IO(96),
+	PORT_DATA_IO(97),
+	PORT_DATA_IO(98),
+	PORT_DATA_I_PU(99),
+	PORT_DATA_O(100),
+	PORT_DATA_O(101),
+	PORT_DATA_I_PU(102),
+	PORT_DATA_IO_PD(103),
+	PORT_DATA_I_PU_PD(104),
+	PORT_DATA_I_PD(105),
+	PORT_DATA_I_PD(106),
+	PORT_DATA_I_PU_PD(107),
+	PORT_DATA_I_PU_PD(108),
+	PORT_DATA_IO_PD(109),
+	PORT_DATA_IO_PD(110),
+	PORT_DATA_IO_PU_PD(111),
+	PORT_DATA_IO_PU_PD(112),
+	PORT_DATA_IO_PU_PD(113),
+	PORT_DATA_IO_PD(114),
+	PORT_DATA_IO_PU(115),
+	PORT_DATA_IO_PU(116),
+	PORT_DATA_IO_PU_PD(117),
+	PORT_DATA_IO_PU_PD(118),
+	PORT_DATA_IO_PD(128),
+
+	PORT_DATA_IO_PD(129),
+	PORT_DATA_IO_PU_PD(130),
+	PORT_DATA_IO_PD(131),
+	PORT_DATA_IO_PD(132),
+	PORT_DATA_IO_PD(133),
+	PORT_DATA_IO_PU_PD(134),
+	PORT_DATA_IO_PU_PD(135),
+	PORT_DATA_IO_PU_PD(136),
+	PORT_DATA_IO_PU_PD(137),
+	PORT_DATA_IO_PD(138),
+	PORT_DATA_IO_PD(139),
+	PORT_DATA_IO_PD(140),
+	PORT_DATA_IO_PD(141),
+	PORT_DATA_IO_PD(142),
+	PORT_DATA_IO_PD(143),
+	PORT_DATA_IO_PU_PD(144),
+	PORT_DATA_IO_PD(145),
+	PORT_DATA_IO_PU_PD(146),
+	PORT_DATA_IO_PU_PD(147),
+	PORT_DATA_IO_PU_PD(148),
+	PORT_DATA_IO_PU_PD(149),
+	PORT_DATA_I_PU_PD(150),
+	PORT_DATA_IO_PU_PD(151),
+	PORT_DATA_IO_PU_PD(152),
+	PORT_DATA_IO_PD(153),
+	PORT_DATA_IO_PD(154),
+	PORT_DATA_I_PU_PD(155),
+	PORT_DATA_IO_PU_PD(156),
+	PORT_DATA_I_PD(157),
+	PORT_DATA_IO_PD(158),
+	PORT_DATA_IO_PU_PD(159),
+	PORT_DATA_IO_PU_PD(160),
+	PORT_DATA_I_PU_PD(161),
+	PORT_DATA_I_PU_PD(162),
+	PORT_DATA_IO_PU_PD(163),
+	PORT_DATA_I_PU_PD(164),
+	PORT_DATA_IO_PD(192),
+	PORT_DATA_IO_PU_PD(193),
+	PORT_DATA_IO_PD(194),
+	PORT_DATA_IO_PU_PD(195),
+	PORT_DATA_IO_PD(196),
+	PORT_DATA_IO_PD(197),
+	PORT_DATA_IO_PD(198),
+	PORT_DATA_IO_PD(199),
+	PORT_DATA_IO_PU_PD(200),
+	PORT_DATA_IO_PU_PD(201),
+	PORT_DATA_IO_PU_PD(202),
+	PORT_DATA_IO_PU_PD(203),
+	PORT_DATA_IO_PU_PD(204),
+	PORT_DATA_IO_PU_PD(205),
+	PORT_DATA_IO_PU_PD(206),
+	PORT_DATA_IO_PD(207),
+	PORT_DATA_IO_PD(208),
+	PORT_DATA_IO_PD(209),
+	PORT_DATA_IO_PD(210),
+	PORT_DATA_IO_PD(211),
+	PORT_DATA_IO_PD(212),
+	PORT_DATA_IO_PD(213),
+	PORT_DATA_IO_PU_PD(214),
+	PORT_DATA_IO_PU_PD(215),
+	PORT_DATA_IO_PD(216),
+	PORT_DATA_IO_PD(217),
+	PORT_DATA_O(218),
+	PORT_DATA_IO_PD(219),
+	PORT_DATA_IO_PD(220),
+	PORT_DATA_IO_PU_PD(221),
+	PORT_DATA_IO_PU_PD(222),
+	PORT_DATA_I_PU_PD(223),
+	PORT_DATA_I_PU_PD(224),
+
+	PORT_DATA_IO_PU_PD(225),
+	PORT_DATA_O(226),
+	PORT_DATA_IO_PU_PD(227),
+	PORT_DATA_I_PU_PD(228),
+	PORT_DATA_I_PD(229),
+	PORT_DATA_IO(230),
+	PORT_DATA_IO_PU_PD(231),
+	PORT_DATA_IO_PU_PD(232),
+	PORT_DATA_I_PU_PD(233),
+	PORT_DATA_IO_PU_PD(234),
+	PORT_DATA_IO_PU_PD(235),
+	PORT_DATA_IO_PU_PD(236),
+	PORT_DATA_IO_PD(237),
+	PORT_DATA_IO_PU_PD(238),
+	PORT_DATA_IO_PU_PD(239),
+	PORT_DATA_IO_PU_PD(240),
+	PORT_DATA_O(241),
+	PORT_DATA_I_PD(242),
+	PORT_DATA_IO_PU_PD(243),
+	PORT_DATA_IO_PU_PD(244),
+	PORT_DATA_IO_PU_PD(245),
+	PORT_DATA_IO_PU_PD(246),
+	PORT_DATA_IO_PU_PD(247),
+	PORT_DATA_IO_PU_PD(248),
+	PORT_DATA_IO_PU_PD(249),
+	PORT_DATA_IO_PU_PD(250),
+	PORT_DATA_IO_PU_PD(251),
+	PORT_DATA_IO_PU_PD(252),
+	PORT_DATA_IO_PU_PD(253),
+	PORT_DATA_IO_PU_PD(254),
+	PORT_DATA_IO_PU_PD(255),
+	PORT_DATA_IO_PU_PD(256),
+	PORT_DATA_IO_PU_PD(257),
+	PORT_DATA_IO_PU_PD(258),
+	PORT_DATA_IO_PU_PD(259),
+	PORT_DATA_IO_PU_PD(260),
+	PORT_DATA_IO_PU_PD(261),
+	PORT_DATA_IO_PU_PD(262),
+	PORT_DATA_IO_PU_PD(263),
+	PORT_DATA_IO_PU_PD(264),
+	PORT_DATA_IO_PU_PD(265),
+	PORT_DATA_IO_PU_PD(266),
+	PORT_DATA_IO_PU_PD(267),
+	PORT_DATA_IO_PU_PD(268),
+	PORT_DATA_IO_PU_PD(269),
+	PORT_DATA_IO_PU_PD(270),
+	PORT_DATA_IO_PU_PD(271),
+	PORT_DATA_IO_PU_PD(272),
+	PORT_DATA_IO_PU_PD(273),
+	PORT_DATA_IO_PU_PD(274),
+	PORT_DATA_IO_PU_PD(275),
+	PORT_DATA_IO_PU_PD(276),
+	PORT_DATA_IO_PU_PD(277),
+	PORT_DATA_IO_PU_PD(278),
+	PORT_DATA_IO_PU_PD(279),
+	PORT_DATA_IO_PU_PD(280),
+	PORT_DATA_O(281),
+	PORT_DATA_O(282),
+	PORT_DATA_I_PU(288),
+	PORT_DATA_IO_PU_PD(289),
+	PORT_DATA_IO_PU_PD(290),
+	PORT_DATA_IO_PU_PD(291),
+	PORT_DATA_IO_PU_PD(292),
+	PORT_DATA_IO_PU_PD(293),
+	PORT_DATA_IO_PU_PD(294),
+	PORT_DATA_IO_PU_PD(295),
+	PORT_DATA_IO_PU_PD(296),
+	PORT_DATA_IO_PU_PD(297),
+	PORT_DATA_IO_PU_PD(298),
+
+	PORT_DATA_IO_PU_PD(299),
+	PORT_DATA_IO_PU_PD(300),
+	PORT_DATA_IO_PU_PD(301),
+	PORT_DATA_IO_PU_PD(302),
+	PORT_DATA_IO_PU_PD(303),
+	PORT_DATA_IO_PU_PD(304),
+	PORT_DATA_IO_PU_PD(305),
+	PORT_DATA_O(306),
+	PORT_DATA_O(307),
+	PORT_DATA_I_PU(308),
+	PORT_DATA_O(309),
+
+	/* Table 25-1 (Function 0-7) */
+	PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
+	PINMUX_DATA(GPI0_MARK, PORT1_FN1),
+	PINMUX_DATA(GPI1_MARK, PORT2_FN1),
+	PINMUX_DATA(GPI2_MARK, PORT3_FN1),
+	PINMUX_DATA(GPI3_MARK, PORT4_FN1),
+	PINMUX_DATA(GPI4_MARK, PORT5_FN1),
+	PINMUX_DATA(GPI5_MARK, PORT6_FN1),
+	PINMUX_DATA(GPI6_MARK, PORT7_FN1),
+	PINMUX_DATA(GPI7_MARK, PORT8_FN1),
+	PINMUX_DATA(SCIFA7_RXD_MARK, PORT12_FN2),
+	PINMUX_DATA(SCIFA7_CTS__MARK, PORT13_FN2),
+	PINMUX_DATA(GPO7_MARK, PORT14_FN1), \
+	PINMUX_DATA(MFG0_OUT2_MARK, PORT14_FN4),
+	PINMUX_DATA(GPO6_MARK, PORT15_FN1), \
+	PINMUX_DATA(MFG1_OUT2_MARK, PORT15_FN4),
+	PINMUX_DATA(GPO5_MARK, PORT16_FN1), \
+	PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), \
+	PINMUX_DATA(FSICOSLDT3_MARK, PORT16_FN3), \
+	PINMUX_DATA(PORT16_VIO_CKOR_MARK, PORT16_FN4),
+	PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
+	PINMUX_DATA(SCIFA7_TXD_MARK, PORT18_FN2),
+	PINMUX_DATA(SCIFA7_RTS__MARK, PORT19_FN2), \
+	PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
+	PINMUX_DATA(GPO0_MARK, PORT20_FN1),
+	PINMUX_DATA(GPO1_MARK, PORT21_FN1),
+	PINMUX_DATA(GPO2_MARK, PORT22_FN1), \
+	PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+	PINMUX_DATA(GPO3_MARK, PORT23_FN1), \
+	PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+	PINMUX_DATA(GPO4_MARK, PORT24_FN1), \
+	PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+	PINMUX_DATA(VINT_MARK, PORT25_FN1),
+	PINMUX_DATA(TCKON_MARK, PORT26_FN1),
+	PINMUX_DATA(XDVFS1_MARK, PORT27_FN1), \
+	PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0,
+		MSEL2CR_MSEL16_1), \
+	PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0,
+		MSEL2CR_MSEL18_0), \
+	PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \
+	PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7),
+	PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \
+	PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0,
+		MSEL2CR_MSEL16_1), \
+	PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0,
+		MSEL2CR_MSEL18_0), \
+	PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7),
+	PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \
+	PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4),
+	PINMUX_DATA(SIM_CLK_MARK, PORT30_FN1), \
+	PINMUX_DATA(PORT30_VIO_CKOR_MARK, PORT30_FN4),
+	PINMUX_DATA(SIM_D_MARK, PORT31_FN1), \
+	PINMUX_DATA(PORT31_IROUT_MARK, PORT31_FN4),
+	PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
+	PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), \
+	PINMUX_DATA(XWUP_MARK, PORT33_FN3),
+	PINMUX_DATA(SCIFA4_RTS__MARK, PORT34_FN2),
+	PINMUX_DATA(SCIFA4_CTS__MARK, PORT35_FN2),
+	PINMUX_DATA(FSIBOBT_MARK, PORT36_FN1), \
+	PINMUX_DATA(FSIBIBT_MARK, PORT36_FN2),
+	PINMUX_DATA(FSIBOLR_MARK, PORT37_FN1), \
+	PINMUX_DATA(FSIBILR_MARK, PORT37_FN2),
+	PINMUX_DATA(FSIBOSLD_MARK, PORT38_FN1),
+	PINMUX_DATA(FSIBISLD_MARK, PORT39_FN1),
+	PINMUX_DATA(VACK_MARK, PORT40_FN1),
+	PINMUX_DATA(XTAL1L_MARK, PORT41_FN1),
+	PINMUX_DATA(SCIFA0_RTS__MARK, PORT42_FN2), \
+	PINMUX_DATA(FSICOSLDT2_MARK, PORT42_FN3),
+	PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
+	PINMUX_DATA(SCIFA0_CTS__MARK, PORT44_FN2), \
+	PINMUX_DATA(FSICOSLDT1_MARK, PORT44_FN3),
+	PINMUX_DATA(FSICOBT_MARK, PORT45_FN1), \
+	PINMUX_DATA(FSICIBT_MARK, PORT45_FN2), \
+	PINMUX_DATA(FSIDOBT_MARK, PORT45_FN3), \
+	PINMUX_DATA(FSIDIBT_MARK, PORT45_FN4),
+	PINMUX_DATA(FSICOLR_MARK, PORT46_FN1), \
+	PINMUX_DATA(FSICILR_MARK, PORT46_FN2), \
+	PINMUX_DATA(FSIDOLR_MARK, PORT46_FN3), \
+	PINMUX_DATA(FSIDILR_MARK, PORT46_FN4),
+	PINMUX_DATA(FSICOSLD_MARK, PORT47_FN1), \
+	PINMUX_DATA(PORT47_FSICSPDIF_MARK, PORT47_FN2),
+	PINMUX_DATA(FSICISLD_MARK, PORT48_FN1), \
+	PINMUX_DATA(FSIDISLD_MARK, PORT48_FN3),
+	PINMUX_DATA(FSIACK_MARK, PORT49_FN1), \
+	PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2, MSEL4CR_MSEL19_1), \
+	PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN4), \
+	PINMUX_DATA(FSIAOMC_MARK, PORT49_FN5),
+	PINMUX_DATA(FSIAOLR_MARK, PORT50_FN1), \
+	PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), \
+	PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), \
+	PINMUX_DATA(FSIAILR_MARK, PORT50_FN5),
+
+	PINMUX_DATA(FSIAOBT_MARK, PORT51_FN1), \
+	PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), \
+	PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), \
+	PINMUX_DATA(FSIAIBT_MARK, PORT51_FN5),
+	PINMUX_DATA(FSIAOSLD_MARK, PORT52_FN1), \
+	PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
+	PINMUX_DATA(FSIASPDIF_MARK, PORT53_FN1), \
+	PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2, MSEL4CR_MSEL19_1), \
+	PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), \
+	PINMUX_DATA(FSIBSPDIF_MARK, PORT53_FN5), \
+	PINMUX_DATA(PORT53_FSICSPDIF_MARK, PORT53_FN6),
+	PINMUX_DATA(FSIBCK_MARK, PORT54_FN1), \
+	PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2, MSEL4CR_MSEL19_1), \
+	PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), \
+	PINMUX_DATA(FSIBOMC_MARK, PORT54_FN5), \
+	PINMUX_DATA(FSICCK_MARK, PORT54_FN6), \
+	PINMUX_DATA(FSICOMC_MARK, PORT54_FN7),
+	PINMUX_DATA(FSIAISLD_MARK, PORT55_FN1), \
+	PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
+	PINMUX_DATA(A0_MARK, PORT57_FN1), \
+	PINMUX_DATA(BS__MARK, PORT57_FN2),
+	PINMUX_DATA(A12_MARK, PORT58_FN1), \
+	PINMUX_DATA(PORT58_KEYOUT7_MARK, PORT58_FN2), \
+	PINMUX_DATA(TPU4TO2_MARK, PORT58_FN4),
+	PINMUX_DATA(A13_MARK, PORT59_FN1), \
+	PINMUX_DATA(PORT59_KEYOUT6_MARK, PORT59_FN2), \
+	PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
+	PINMUX_DATA(A14_MARK, PORT60_FN1), \
+	PINMUX_DATA(KEYOUT5_MARK, PORT60_FN2),
+	PINMUX_DATA(A15_MARK, PORT61_FN1), \
+	PINMUX_DATA(KEYOUT4_MARK, PORT61_FN2),
+	PINMUX_DATA(A16_MARK, PORT62_FN1), \
+	PINMUX_DATA(KEYOUT3_MARK, PORT62_FN2), \
+	PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A17_MARK, PORT63_FN1), \
+	PINMUX_DATA(KEYOUT2_MARK, PORT63_FN2), \
+	PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A18_MARK, PORT64_FN1), \
+	PINMUX_DATA(KEYOUT1_MARK, PORT64_FN2), \
+	PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A19_MARK, PORT65_FN1), \
+	PINMUX_DATA(KEYOUT0_MARK, PORT65_FN2), \
+	PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A20_MARK, PORT66_FN1), \
+	PINMUX_DATA(KEYIN0_MARK, PORT66_FN2), \
+	PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A21_MARK, PORT67_FN1), \
+	PINMUX_DATA(KEYIN1_MARK, PORT67_FN2), \
+	PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A22_MARK, PORT68_FN1), \
+	PINMUX_DATA(KEYIN2_MARK, PORT68_FN2), \
+	PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A23_MARK, PORT69_FN1), \
+	PINMUX_DATA(KEYIN3_MARK, PORT69_FN2), \
+	PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A24_MARK, PORT70_FN1), \
+	PINMUX_DATA(KEYIN4_MARK, PORT70_FN2), \
+	PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A25_MARK, PORT71_FN1), \
+	PINMUX_DATA(KEYIN5_MARK, PORT71_FN2), \
+	PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN4, MSEL3CR_MSEL11_0),
+	PINMUX_DATA(A26_MARK, PORT72_FN1), \
+	PINMUX_DATA(KEYIN6_MARK, PORT72_FN2),
+	PINMUX_DATA(KEYIN7_MARK, PORT73_FN2),
+	PINMUX_DATA(D0_NAF0_MARK, PORT74_FN1),
+	PINMUX_DATA(D1_NAF1_MARK, PORT75_FN1),
+	PINMUX_DATA(D2_NAF2_MARK, PORT76_FN1),
+	PINMUX_DATA(D3_NAF3_MARK, PORT77_FN1),
+	PINMUX_DATA(D4_NAF4_MARK, PORT78_FN1),
+	PINMUX_DATA(D5_NAF5_MARK, PORT79_FN1),
+	PINMUX_DATA(D6_NAF6_MARK, PORT80_FN1),
+	PINMUX_DATA(D7_NAF7_MARK, PORT81_FN1),
+	PINMUX_DATA(D8_NAF8_MARK, PORT82_FN1),
+	PINMUX_DATA(D9_NAF9_MARK, PORT83_FN1),
+	PINMUX_DATA(D10_NAF10_MARK, PORT84_FN1),
+	PINMUX_DATA(D11_NAF11_MARK, PORT85_FN1),
+	PINMUX_DATA(D12_NAF12_MARK, PORT86_FN1),
+	PINMUX_DATA(D13_NAF13_MARK, PORT87_FN1),
+	PINMUX_DATA(D14_NAF14_MARK, PORT88_FN1),
+	PINMUX_DATA(D15_NAF15_MARK, PORT89_FN1),
+	PINMUX_DATA(CS4__MARK, PORT90_FN1),
+	PINMUX_DATA(CS5A__MARK, PORT91_FN1), \
+	PINMUX_DATA(PORT91_RDWR_MARK, PORT91_FN2),
+	PINMUX_DATA(CS5B__MARK, PORT92_FN1), \
+	PINMUX_DATA(FCE1__MARK, PORT92_FN2),
+	PINMUX_DATA(CS6B__MARK, PORT93_FN1), \
+	PINMUX_DATA(DACK0_MARK, PORT93_FN4),
+	PINMUX_DATA(FCE0__MARK, PORT94_FN1), \
+	PINMUX_DATA(CS6A__MARK, PORT94_FN2),
+	PINMUX_DATA(WAIT__MARK, PORT95_FN1), \
+	PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
+	PINMUX_DATA(RD__FSC_MARK, PORT96_FN1),
+	PINMUX_DATA(WE0__FWE_MARK, PORT97_FN1), \
+	PINMUX_DATA(RDWR_FWE_MARK, PORT97_FN2),
+	PINMUX_DATA(WE1__MARK, PORT98_FN1),
+	PINMUX_DATA(FRB_MARK, PORT99_FN1),
+	PINMUX_DATA(CKO_MARK, PORT100_FN1),
+	PINMUX_DATA(NBRSTOUT__MARK, PORT101_FN1),
+	PINMUX_DATA(NBRST__MARK, PORT102_FN1),
+	PINMUX_DATA(BBIF2_TXD_MARK, PORT103_FN3),
+	PINMUX_DATA(BBIF2_RXD_MARK, PORT104_FN3),
+	PINMUX_DATA(BBIF2_SYNC_MARK, PORT105_FN3),
+	PINMUX_DATA(BBIF2_SCK_MARK, PORT106_FN3),
+	PINMUX_DATA(SCIFA3_CTS__MARK, PORT107_FN3), \
+	PINMUX_DATA(MFG3_IN2_MARK, PORT107_FN4),
+	PINMUX_DATA(SCIFA3_RXD_MARK, PORT108_FN3), \
+	PINMUX_DATA(MFG3_IN1_MARK, PORT108_FN4),
+	PINMUX_DATA(BBIF1_SS2_MARK, PORT109_FN2), \
+	PINMUX_DATA(SCIFA3_RTS__MARK, PORT109_FN3), \
+	PINMUX_DATA(MFG3_OUT1_MARK, PORT109_FN4),
+	PINMUX_DATA(SCIFA3_TXD_MARK, PORT110_FN3),
+	PINMUX_DATA(HSI_RX_DATA_MARK, PORT111_FN1), \
+	PINMUX_DATA(BBIF1_RXD_MARK, PORT111_FN3),
+	PINMUX_DATA(HSI_TX_WAKE_MARK, PORT112_FN1), \
+	PINMUX_DATA(BBIF1_TSCK_MARK, PORT112_FN3),
+	PINMUX_DATA(HSI_TX_DATA_MARK, PORT113_FN1), \
+	PINMUX_DATA(BBIF1_TSYNC_MARK, PORT113_FN3),
+	PINMUX_DATA(HSI_TX_READY_MARK, PORT114_FN1), \
+	PINMUX_DATA(BBIF1_TXD_MARK, PORT114_FN3),
+	PINMUX_DATA(HSI_RX_READY_MARK, PORT115_FN1), \
+	PINMUX_DATA(BBIF1_RSCK_MARK, PORT115_FN3), \
+	PINMUX_DATA(PORT115_I2C_SCL2_MARK, PORT115_FN5, MSEL2CR_MSEL17_1), \
+	PINMUX_DATA(PORT115_I2C_SCL3_MARK, PORT115_FN6, MSEL2CR_MSEL19_1),
+	PINMUX_DATA(HSI_RX_WAKE_MARK, PORT116_FN1), \
+	PINMUX_DATA(BBIF1_RSYNC_MARK, PORT116_FN3), \
+	PINMUX_DATA(PORT116_I2C_SDA2_MARK, PORT116_FN5, MSEL2CR_MSEL17_1), \
+	PINMUX_DATA(PORT116_I2C_SDA3_MARK, PORT116_FN6, MSEL2CR_MSEL19_1),
+	PINMUX_DATA(HSI_RX_FLAG_MARK, PORT117_FN1), \
+	PINMUX_DATA(BBIF1_SS1_MARK, PORT117_FN2), \
+	PINMUX_DATA(BBIF1_FLOW_MARK, PORT117_FN3),
+	PINMUX_DATA(HSI_TX_FLAG_MARK, PORT118_FN1),
+	PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), \
+	PINMUX_DATA(PORT128_LCD2VSYN_MARK, PORT128_FN4, MSEL3CR_MSEL2_0), \
+	PINMUX_DATA(VIO2_VD_MARK, PORT128_FN6, MSEL4CR_MSEL27_0), \
+	PINMUX_DATA(LCD2D0_MARK, PORT128_FN7),
+
+	PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), \
+	PINMUX_DATA(PORT129_LCD2HSYN_MARK, PORT129_FN4), \
+	PINMUX_DATA(PORT129_LCD2CS__MARK, PORT129_FN5), \
+	PINMUX_DATA(VIO2_HD_MARK, PORT129_FN6, MSEL4CR_MSEL27_0), \
+	PINMUX_DATA(LCD2D1_MARK, PORT129_FN7),
+	PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), \
+	PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3, MSEL4CR_MSEL11_0,
+		MSEL4CR_MSEL10_1), \
+	PINMUX_DATA(LCD2D10_MARK, PORT130_FN7),
+	PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), \
+	PINMUX_DATA(PORT131_KEYOUT6_MARK, PORT131_FN2), \
+	PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), \
+	PINMUX_DATA(PORT131_KEYOUT11_MARK, PORT131_FN4), \
+	PINMUX_DATA(LCD2D11_MARK, PORT131_FN7),
+	PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), \
+	PINMUX_DATA(PORT132_KEYOUT7_MARK, PORT132_FN2), \
+	PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), \
+	PINMUX_DATA(PORT132_KEYOUT10_MARK, PORT132_FN4), \
+	PINMUX_DATA(LCD2D12_MARK, PORT132_FN7),
+	PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), \
+	PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT133_FN3, MSEL4CR_MSEL11_0), \
+	PINMUX_DATA(LCD2D13_MARK, PORT133_FN7),
+	PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), \
+	PINMUX_DATA(MSIOF2_TXD_MARK, PORT134_FN3, MSEL4CR_MSEL11_0), \
+	PINMUX_DATA(LCD2D14_MARK, PORT134_FN7),
+	PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), \
+	PINMUX_DATA(MSIOF2_TSCK_MARK, PORT135_FN3, MSEL4CR_MSEL11_0), \
+	PINMUX_DATA(LCD2D15_MARK, PORT135_FN7),
+	PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), \
+	PINMUX_DATA(PORT136_KEYOUT8_MARK, PORT136_FN2), \
+	PINMUX_DATA(LCD2D16_MARK, PORT136_FN7),
+	PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), \
+	PINMUX_DATA(PORT137_KEYOUT9_MARK, PORT137_FN2), \
+	PINMUX_DATA(LCD2D17_MARK, PORT137_FN7),
+	PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), \
+	PINMUX_DATA(PORT138_KEYOUT8_MARK, PORT138_FN2), \
+	PINMUX_DATA(VIO2_D0_MARK, PORT138_FN6), \
+	PINMUX_DATA(LCD2D6_MARK, PORT138_FN7),
+	PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), \
+	PINMUX_DATA(PORT139_KEYOUT9_MARK, PORT139_FN2), \
+	PINMUX_DATA(VIO2_D1_MARK, PORT139_FN6), \
+	PINMUX_DATA(LCD2D7_MARK, PORT139_FN7),
+	PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), \
+	PINMUX_DATA(TPU0TO2_MARK, PORT140_FN4), \
+	PINMUX_DATA(VIO2_D2_MARK, PORT140_FN6), \
+	PINMUX_DATA(LCD2D8_MARK, PORT140_FN7),
+	PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), \
+	PINMUX_DATA(TPU0TO3_MARK, PORT141_FN4), \
+	PINMUX_DATA(VIO2_D3_MARK, PORT141_FN6), \
+	PINMUX_DATA(LCD2D9_MARK, PORT141_FN7),
+	PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), \
+	PINMUX_DATA(PORT142_KEYOUT10_MARK, PORT142_FN2), \
+	PINMUX_DATA(VIO2_D4_MARK, PORT142_FN6), \
+	PINMUX_DATA(LCD2D2_MARK, PORT142_FN7),
+	PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), \
+	PINMUX_DATA(PORT143_KEYOUT11_MARK, PORT143_FN2), \
+	PINMUX_DATA(PORT143_KEYOUT6_MARK, PORT143_FN3), \
+	PINMUX_DATA(VIO2_D5_MARK, PORT143_FN6), \
+	PINMUX_DATA(LCD2D3_MARK, PORT143_FN7),
+	PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), \
+	PINMUX_DATA(PORT144_KEYOUT7_MARK, PORT144_FN2), \
+	PINMUX_DATA(VIO2_D6_MARK, PORT144_FN6), \
+	PINMUX_DATA(LCD2D4_MARK, PORT144_FN7),
+	PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), \
+	PINMUX_DATA(TPU1TO3_MARK, PORT145_FN3), \
+	PINMUX_DATA(PORT145_LCD2DISP_MARK, PORT145_FN4), \
+	PINMUX_DATA(PORT145_LCD2RS_MARK, PORT145_FN5), \
+	PINMUX_DATA(VIO2_D7_MARK, PORT145_FN6), \
+	PINMUX_DATA(LCD2D5_MARK, PORT145_FN7),
+	PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), \
+	PINMUX_DATA(LCD2DCK_MARK, PORT146_FN4), \
+	PINMUX_DATA(PORT146_LCD2WR__MARK, PORT146_FN5), \
+	PINMUX_DATA(VIO2_CLK_MARK, PORT146_FN6, MSEL4CR_MSEL27_0), \
+	PINMUX_DATA(LCD2D18_MARK, PORT146_FN7),
+	PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), \
+	PINMUX_DATA(LCD2RD__MARK, PORT147_FN4), \
+	PINMUX_DATA(VIO2_FIELD_MARK, PORT147_FN6, MSEL4CR_MSEL27_0), \
+	PINMUX_DATA(LCD2D19_MARK, PORT147_FN7),
+	PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
+	PINMUX_DATA(A27_MARK, PORT149_FN1), \
+	PINMUX_DATA(PORT149_RDWR_MARK, PORT149_FN2), \
+	PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), \
+	PINMUX_DATA(PORT149_KEYOUT9_MARK, PORT149_FN4),
+	PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN3),
+	PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN4), \
+	PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN5),
+	PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN4), \
+	PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN5),
+	PINMUX_DATA(TPU1TO2_MARK, PORT153_FN3), \
+	PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN4), \
+	PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN5),
+	PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2, MSEL3CR_MSEL9_0), \
+	PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN5),
+	PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2, MSEL3CR_MSEL9_0), \
+	PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN5),
+	PINMUX_DATA(SCIFA2_RTS1__MARK, PORT156_FN2, MSEL3CR_MSEL9_0), \
+	PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN5),
+	PINMUX_DATA(SCIFA2_CTS1__MARK, PORT157_FN2, MSEL3CR_MSEL9_0), \
+	PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN5, MSEL4CR_MSEL11_0,
+		MSEL4CR_MSEL10_0),
+	PINMUX_DATA(DINT__MARK, PORT158_FN1), \
+	PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2, MSEL3CR_MSEL9_0), \
+	PINMUX_DATA(TS_SCK3_MARK, PORT158_FN4),
+	PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1, MSEL4CR_MSEL22_0), \
+	PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2, MSEL4CR_MSEL21_1), \
+	PINMUX_DATA(NMI_MARK, PORT159_FN3),
+	PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1, MSEL4CR_MSEL22_0), \
+	PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2, MSEL4CR_MSEL21_1),
+	PINMUX_DATA(PORT161_SCIFB_CTS__MARK, PORT161_FN1, MSEL4CR_MSEL22_0), \
+	PINMUX_DATA(PORT161_SCIFA5_CTS__MARK, PORT161_FN2, MSEL4CR_MSEL21_1),
+	PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1, MSEL4CR_MSEL22_0), \
+	PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2, MSEL4CR_MSEL21_1),
+	PINMUX_DATA(PORT163_SCIFB_RTS__MARK, PORT163_FN1, MSEL4CR_MSEL22_0), \
+	PINMUX_DATA(PORT163_SCIFA5_RTS__MARK, PORT163_FN2, MSEL4CR_MSEL21_1), \
+	PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
+	PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
+	PINMUX_DATA(LCDD1_MARK, PORT193_FN1), \
+	PINMUX_DATA(PORT193_SCIFA5_CTS__MARK, PORT193_FN3, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_1), \
+	PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN5),
+	PINMUX_DATA(LCDD2_MARK, PORT194_FN1), \
+	PINMUX_DATA(PORT194_SCIFA5_RTS__MARK, PORT194_FN3, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_1), \
+	PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN5),
+	PINMUX_DATA(LCDD3_MARK, PORT195_FN1), \
+	PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_1), \
+	PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN5),
+	PINMUX_DATA(LCDD4_MARK, PORT196_FN1), \
+	PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_1),
+	PINMUX_DATA(LCDD5_MARK, PORT197_FN1), \
+	PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_1), \
+	PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN5), \
+	PINMUX_DATA(TPU2TO1_MARK, PORT197_FN7),
+	PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
+	PINMUX_DATA(LCDD7_MARK, PORT199_FN1), \
+	PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), \
+	PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN5),
+	PINMUX_DATA(LCDD8_MARK, PORT200_FN1), \
+	PINMUX_DATA(D16_MARK, PORT200_FN6),
+	PINMUX_DATA(LCDD9_MARK, PORT201_FN1), \
+	PINMUX_DATA(D17_MARK, PORT201_FN6),
+	PINMUX_DATA(LCDD10_MARK, PORT202_FN1), \
+	PINMUX_DATA(D18_MARK, PORT202_FN6),
+	PINMUX_DATA(LCDD11_MARK, PORT203_FN1), \
+	PINMUX_DATA(D19_MARK, PORT203_FN6),
+	PINMUX_DATA(LCDD12_MARK, PORT204_FN1), \
+	PINMUX_DATA(D20_MARK, PORT204_FN6),
+	PINMUX_DATA(LCDD13_MARK, PORT205_FN1), \
+	PINMUX_DATA(D21_MARK, PORT205_FN6),
+	PINMUX_DATA(LCDD14_MARK, PORT206_FN1), \
+	PINMUX_DATA(D22_MARK, PORT206_FN6),
+	PINMUX_DATA(LCDD15_MARK, PORT207_FN1), \
+	PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D23_MARK, PORT207_FN6),
+	PINMUX_DATA(LCDD16_MARK, PORT208_FN1), \
+	PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D24_MARK, PORT208_FN6),
+	PINMUX_DATA(LCDD17_MARK, PORT209_FN1), \
+	PINMUX_DATA(D25_MARK, PORT209_FN6),
+	PINMUX_DATA(LCDD18_MARK, PORT210_FN1), \
+	PINMUX_DATA(DREQ2_MARK, PORT210_FN2), \
+	PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D26_MARK, PORT210_FN6),
+	PINMUX_DATA(LCDD19_MARK, PORT211_FN1), \
+	PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D27_MARK, PORT211_FN6),
+	PINMUX_DATA(LCDD20_MARK, PORT212_FN1), \
+	PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), \
+	PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D28_MARK, PORT212_FN6),
+	PINMUX_DATA(LCDD21_MARK, PORT213_FN1), \
+	PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), \
+	PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D29_MARK, PORT213_FN6),
+	PINMUX_DATA(LCDD22_MARK, PORT214_FN1), \
+	PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), \
+	PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D30_MARK, PORT214_FN6),
+	PINMUX_DATA(LCDD23_MARK, PORT215_FN1), \
+	PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), \
+	PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(D31_MARK, PORT215_FN6),
+	PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), \
+	PINMUX_DATA(LCDWR__MARK, PORT216_FN2),
+	PINMUX_DATA(LCDRD__MARK, PORT217_FN1), \
+	PINMUX_DATA(DACK2_MARK, PORT217_FN2), \
+	PINMUX_DATA(PORT217_LCD2RS_MARK, PORT217_FN3), \
+	PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(VIO2_FIELD3_MARK, PORT217_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_1), \
+	PINMUX_DATA(PORT217_LCD2DISP_MARK, PORT217_FN7),
+	PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), \
+	PINMUX_DATA(LCDCS__MARK, PORT218_FN2), \
+	PINMUX_DATA(LCDCS2__MARK, PORT218_FN3), \
+	PINMUX_DATA(DACK3_MARK, PORT218_FN4), \
+	PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
+	PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), \
+	PINMUX_DATA(LCDRS_MARK, PORT219_FN2), \
+	PINMUX_DATA(PORT219_LCD2WR__MARK, PORT219_FN3), \
+	PINMUX_DATA(DREQ3_MARK, PORT219_FN4), \
+	PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(VIO2_CLK3_MARK, PORT219_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_1), \
+	PINMUX_DATA(LCD2DCK_2_MARK, PORT219_FN7),
+	PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), \
+	PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
+	PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), \
+	PINMUX_DATA(DREQ1_MARK, PORT221_FN2), \
+	PINMUX_DATA(PORT221_LCD2CS__MARK, PORT221_FN3), \
+	PINMUX_DATA(PWEN_MARK, PORT221_FN4), \
+	PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(VIO2_HD3_MARK, PORT221_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_1), \
+	PINMUX_DATA(PORT221_LCD2HSYN_MARK, PORT221_FN7),
+	PINMUX_DATA(LCDDON_MARK, PORT222_FN1), \
+	PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), \
+	PINMUX_DATA(DACK1_MARK, PORT222_FN3), \
+	PINMUX_DATA(OVCN_MARK, PORT222_FN4), \
+	PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5, MSEL3CR_MSEL11_1), \
+	PINMUX_DATA(VIO2_VD3_MARK, PORT222_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_1), \
+	PINMUX_DATA(PORT222_LCD2VSYN_MARK, PORT222_FN7, MSEL3CR_MSEL2_1),
+
+	PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN2), \
+	PINMUX_DATA(OVCN2_MARK, PORT225_FN4),
+	PINMUX_DATA(EXTLP_MARK, PORT226_FN1), \
+	PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), \
+	PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN5),
+	PINMUX_DATA(SCIFA1_RTS__MARK, PORT227_FN2), \
+	PINMUX_DATA(IDIN_MARK, PORT227_FN4),
+	PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN2),
+	PINMUX_DATA(SCIFA1_CTS__MARK, PORT229_FN2), \
+	PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN3),
+	PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), \
+	PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2, MSEL3CR_MSEL9_1),
+	PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), \
+	PINMUX_DATA(SCIFA2_CTS2__MARK, PORT231_FN2, MSEL3CR_MSEL9_1),
+	PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), \
+	PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2, MSEL3CR_MSEL9_1),
+	PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), \
+	PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2, MSEL3CR_MSEL9_1),
+	PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), \
+	PINMUX_DATA(SCIFA2_RTS2__MARK, PORT234_FN2, MSEL3CR_MSEL9_1), \
+	PINMUX_DATA(VIO2_CLK2_MARK, PORT234_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_0), \
+	PINMUX_DATA(LCD2D20_MARK, PORT234_FN7),
+	PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), \
+	PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), \
+	PINMUX_DATA(VIO2_VD2_MARK, PORT235_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_0), \
+	PINMUX_DATA(LCD2D21_MARK, PORT235_FN7),
+	PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), \
+	PINMUX_DATA(PORT236_I2C_SDA2_MARK, PORT236_FN2, MSEL2CR_MSEL17_0,
+		MSEL2CR_MSEL16_0),
+	PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), \
+	PINMUX_DATA(PORT237_I2C_SCL2_MARK, PORT237_FN2, MSEL2CR_MSEL17_0,
+		MSEL2CR_MSEL16_0),
+	PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), \
+	PINMUX_DATA(VIO2_FIELD2_MARK, PORT238_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_0), \
+	PINMUX_DATA(LCD2D22_MARK, PORT238_FN7),
+	PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), \
+	PINMUX_DATA(VIO2_HD2_MARK, PORT239_FN6, MSEL4CR_MSEL27_1,
+		MSEL4CR_MSEL26_0), \
+	PINMUX_DATA(LCD2D23_MARK, PORT239_FN7),
+	PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
+	PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1, MSEL4CR_MSEL19_0), \
+	PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), \
+	PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), \
+	PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
+	PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1, MSEL4CR_MSEL19_0), \
+	PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN3),
+	PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1, MSEL4CR_MSEL19_0), \
+	PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
+	PINMUX_DATA(PORT244_SCIFA5_CTS__MARK, PORT244_FN1, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_0), \
+	PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), \
+	PINMUX_DATA(PORT244_SCIFB_CTS__MARK, PORT244_FN3, MSEL4CR_MSEL22_1), \
+	PINMUX_DATA(MSIOF2R_RXD_MARK, PORT244_FN7, MSEL4CR_MSEL11_1),
+	PINMUX_DATA(PORT245_SCIFA5_RTS__MARK, PORT245_FN1, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_0), \
+	PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), \
+	PINMUX_DATA(PORT245_SCIFB_RTS__MARK, PORT245_FN3, MSEL4CR_MSEL22_1), \
+	PINMUX_DATA(MSIOF2R_TXD_MARK, PORT245_FN7, MSEL4CR_MSEL11_1),
+	PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_0), \
+	PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), \
+	PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3, MSEL4CR_MSEL22_1), \
+	PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
+	PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_0), \
+	PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), \
+	PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3, MSEL4CR_MSEL22_1), \
+	PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
+	PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1, MSEL4CR_MSEL21_0,
+		MSEL4CR_MSEL20_0), \
+	PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), \
+	PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3, MSEL4CR_MSEL22_1), \
+	PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), \
+	PINMUX_DATA(PORT248_I2C_SCL3_MARK, PORT248_FN5, MSEL2CR_MSEL19_0,
+		MSEL2CR_MSEL18_0), \
+	PINMUX_DATA(MSIOF2R_TSCK_MARK, PORT248_FN7, MSEL4CR_MSEL11_1),
+	PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), \
+	PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), \
+	PINMUX_DATA(PORT249_I2C_SDA3_MARK, PORT249_FN5, MSEL2CR_MSEL19_0,
+		MSEL2CR_MSEL18_0), \
+	PINMUX_DATA(MSIOF2R_TSYNC_MARK, PORT249_FN7, MSEL4CR_MSEL11_1),
+	PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
+	PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
+	PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
+	PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
+	PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
+	PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
+	PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
+	PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
+	PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
+	PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), \
+	PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
+	PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), \
+	PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
+	PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), \
+	PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
+	PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), \
+	PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
+	PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
+	PINMUX_DATA(SDHICLK2_MARK, PORT264_FN1),
+	PINMUX_DATA(SDHID2_0_MARK, PORT265_FN1), \
+	PINMUX_DATA(TS_SPSYNC4_MARK, PORT265_FN3),
+	PINMUX_DATA(SDHID2_1_MARK, PORT266_FN1), \
+	PINMUX_DATA(TS_SDAT4_MARK, PORT266_FN3),
+	PINMUX_DATA(SDHID2_2_MARK, PORT267_FN1), \
+	PINMUX_DATA(TS_SDEN4_MARK, PORT267_FN3),
+	PINMUX_DATA(SDHID2_3_MARK, PORT268_FN1), \
+	PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3),
+	PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1),
+	PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3),
+	PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3),
+	PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3),
+	PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, MSEL4CR_MSEL15_0), \
+	PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3),
+	PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, MSEL4CR_MSEL15_0),
+	PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \
+	PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2),
+	PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1),
+	PINMUX_DATA(MCP_CKO_MARK, PORT289_FN1), \
+	PINMUX_DATA(MMCCLK1_MARK, PORT289_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D15_MCP_NAF15_MARK, PORT290_FN1),
+	PINMUX_DATA(MCP_D14_MCP_NAF14_MARK, PORT291_FN1),
+	PINMUX_DATA(MCP_D13_MCP_NAF13_MARK, PORT292_FN1),
+	PINMUX_DATA(MCP_D12_MCP_NAF12_MARK, PORT293_FN1),
+	PINMUX_DATA(MCP_D11_MCP_NAF11_MARK, PORT294_FN1),
+	PINMUX_DATA(MCP_D10_MCP_NAF10_MARK, PORT295_FN1),
+	PINMUX_DATA(MCP_D9_MCP_NAF9_MARK, PORT296_FN1),
+	PINMUX_DATA(MCP_D8_MCP_NAF8_MARK, PORT297_FN1), \
+	PINMUX_DATA(MMCCMD1_MARK, PORT297_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D7_MCP_NAF7_MARK, PORT298_FN1), \
+	PINMUX_DATA(MMCD1_7_MARK, PORT298_FN2, MSEL4CR_MSEL15_1),
+
+	PINMUX_DATA(MCP_D6_MCP_NAF6_MARK, PORT299_FN1), \
+	PINMUX_DATA(MMCD1_6_MARK, PORT299_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D5_MCP_NAF5_MARK, PORT300_FN1), \
+	PINMUX_DATA(MMCD1_5_MARK, PORT300_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D4_MCP_NAF4_MARK, PORT301_FN1), \
+	PINMUX_DATA(MMCD1_4_MARK, PORT301_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D3_MCP_NAF3_MARK, PORT302_FN1), \
+	PINMUX_DATA(MMCD1_3_MARK, PORT302_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D2_MCP_NAF2_MARK, PORT303_FN1), \
+	PINMUX_DATA(MMCD1_2_MARK, PORT303_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D1_MCP_NAF1_MARK, PORT304_FN1), \
+	PINMUX_DATA(MMCD1_1_MARK, PORT304_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_D0_MCP_NAF0_MARK, PORT305_FN1), \
+	PINMUX_DATA(MMCD1_0_MARK, PORT305_FN2, MSEL4CR_MSEL15_1),
+	PINMUX_DATA(MCP_NBRSTOUT__MARK, PORT306_FN1),
+	PINMUX_DATA(MCP_WE0__MCP_FWE_MARK, PORT309_FN1), \
+	PINMUX_DATA(MCP_RDWR_MCP_FWE_MARK, PORT309_FN2),
+
+	/* MSEL2 special cases */
+	PINMUX_DATA(TSIF2_TS_XX1_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0,
+		MSEL2CR_MSEL12_0),
+	PINMUX_DATA(TSIF2_TS_XX2_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0,
+		MSEL2CR_MSEL12_1),
+	PINMUX_DATA(TSIF2_TS_XX3_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1,
+		MSEL2CR_MSEL12_0),
+	PINMUX_DATA(TSIF2_TS_XX4_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1,
+		MSEL2CR_MSEL12_1),
+	PINMUX_DATA(TSIF2_TS_XX5_MARK, MSEL2CR_MSEL14_1, MSEL2CR_MSEL13_0,
+		MSEL2CR_MSEL12_0),
+	PINMUX_DATA(TSIF1_TS_XX1_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0,
+		MSEL2CR_MSEL9_0),
+	PINMUX_DATA(TSIF1_TS_XX2_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0,
+		MSEL2CR_MSEL9_1),
+	PINMUX_DATA(TSIF1_TS_XX3_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1,
+		MSEL2CR_MSEL9_0),
+	PINMUX_DATA(TSIF1_TS_XX4_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1,
+		MSEL2CR_MSEL9_1),
+	PINMUX_DATA(TSIF1_TS_XX5_MARK, MSEL2CR_MSEL11_1, MSEL2CR_MSEL10_0,
+		MSEL2CR_MSEL9_0),
+	PINMUX_DATA(TSIF0_TS_XX1_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0,
+		MSEL2CR_MSEL6_0),
+	PINMUX_DATA(TSIF0_TS_XX2_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0,
+		MSEL2CR_MSEL6_1),
+	PINMUX_DATA(TSIF0_TS_XX3_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1,
+		MSEL2CR_MSEL6_0),
+	PINMUX_DATA(TSIF0_TS_XX4_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1,
+		MSEL2CR_MSEL6_1),
+	PINMUX_DATA(TSIF0_TS_XX5_MARK, MSEL2CR_MSEL8_1, MSEL2CR_MSEL7_0,
+		MSEL2CR_MSEL6_0),
+	PINMUX_DATA(MST1_TS_XX1_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0,
+		MSEL2CR_MSEL3_0),
+	PINMUX_DATA(MST1_TS_XX2_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0,
+		MSEL2CR_MSEL3_1),
+	PINMUX_DATA(MST1_TS_XX3_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1,
+		MSEL2CR_MSEL3_0),
+	PINMUX_DATA(MST1_TS_XX4_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1,
+		MSEL2CR_MSEL3_1),
+	PINMUX_DATA(MST1_TS_XX5_MARK, MSEL2CR_MSEL5_1, MSEL2CR_MSEL4_0,
+		MSEL2CR_MSEL3_0),
+	PINMUX_DATA(MST0_TS_XX1_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0,
+		MSEL2CR_MSEL0_0),
+	PINMUX_DATA(MST0_TS_XX2_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0,
+		MSEL2CR_MSEL0_1),
+	PINMUX_DATA(MST0_TS_XX3_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1,
+		MSEL2CR_MSEL0_0),
+	PINMUX_DATA(MST0_TS_XX4_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1,
+		MSEL2CR_MSEL0_1),
+	PINMUX_DATA(MST0_TS_XX5_MARK, MSEL2CR_MSEL2_1, MSEL2CR_MSEL1_0,
+		MSEL2CR_MSEL0_0),
+
+	/* MSEL3 special cases */
+	PINMUX_DATA(SDHI0_VCCQ_MC0_ON_MARK, MSEL3CR_MSEL28_1),
+	PINMUX_DATA(SDHI0_VCCQ_MC0_OFF_MARK, MSEL3CR_MSEL28_0),
+	PINMUX_DATA(DEBUG_MON_VIO_MARK, MSEL3CR_MSEL15_0),
+	PINMUX_DATA(DEBUG_MON_LCDD_MARK, MSEL3CR_MSEL15_1),
+	PINMUX_DATA(LCDC_LCDC0_MARK, MSEL3CR_MSEL6_0),
+	PINMUX_DATA(LCDC_LCDC1_MARK, MSEL3CR_MSEL6_1),
+
+	/* MSEL4 special cases */
+	PINMUX_DATA(IRQ9_MEM_INT_MARK, MSEL4CR_MSEL29_0),
+	PINMUX_DATA(IRQ9_MCP_INT_MARK, MSEL4CR_MSEL29_1),
+	PINMUX_DATA(A11_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_0),
+	PINMUX_DATA(KEYOUT8_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_1),
+	PINMUX_DATA(TPU4TO3_MARK, MSEL4CR_MSEL13_1, MSEL4CR_MSEL12_0),
+	PINMUX_DATA(RESETA_N_PU_ON_MARK, MSEL4CR_MSEL4_0),
+	PINMUX_DATA(RESETA_N_PU_OFF_MARK, MSEL4CR_MSEL4_1),
+	PINMUX_DATA(EDBGREQ_PD_MARK, MSEL4CR_MSEL1_0),
+	PINMUX_DATA(EDBGREQ_PU_MARK, MSEL4CR_MSEL1_1),
+
+	/* Functions with pull-ups */
+	PINMUX_DATA(KEYIN0_PU_MARK, PORT66_FN2, PORT66_IN_PU),
+	PINMUX_DATA(KEYIN1_PU_MARK, PORT67_FN2, PORT67_IN_PU),
+	PINMUX_DATA(KEYIN2_PU_MARK, PORT68_FN2, PORT68_IN_PU),
+	PINMUX_DATA(KEYIN3_PU_MARK, PORT69_FN2, PORT69_IN_PU),
+	PINMUX_DATA(KEYIN4_PU_MARK, PORT70_FN2, PORT70_IN_PU),
+	PINMUX_DATA(KEYIN5_PU_MARK, PORT71_FN2, PORT71_IN_PU),
+	PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU),
+	PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU),
+
+	PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_IN_PU, PORT259_FN1),
+	PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_IN_PU, PORT260_FN1),
+	PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_IN_PU, PORT261_FN1),
+	PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_IN_PU, PORT262_FN1),
+	PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_IN_PU, PORT263_FN1),
+
+	PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU,
+		MSEL4CR_MSEL15_0),
+	PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT279_IN_PU,
+		MSEL4CR_MSEL15_1),
+	PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
+	PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
+	PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU),
+	PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
+};
+
+#define _GPIO_PORT(pfx, sfx) PINMUX_GPIO(GPIO_PORT##pfx, PORT##pfx##_DATA)
+#define GPIO_PORT_310() _310(_GPIO_PORT, , unused)
+#define GPIO_FN(str) PINMUX_GPIO(GPIO_FN_##str, str##_MARK)
+
+static struct pinmux_gpio pinmux_gpios[] = {
+	GPIO_PORT_310(),
+
+	/* Table 25-1 (Functions 0-7) */
+	GPIO_FN(VBUS_0),
+	GPIO_FN(GPI0),
+	GPIO_FN(GPI1),
+	GPIO_FN(GPI2),
+	GPIO_FN(GPI3),
+	GPIO_FN(GPI4),
+	GPIO_FN(GPI5),
+	GPIO_FN(GPI6),
+	GPIO_FN(GPI7),
+	GPIO_FN(SCIFA7_RXD),
+	GPIO_FN(SCIFA7_CTS_),
+	GPIO_FN(GPO7), \
+	GPIO_FN(MFG0_OUT2),
+	GPIO_FN(GPO6), \
+	GPIO_FN(MFG1_OUT2),
+	GPIO_FN(GPO5), \
+	GPIO_FN(SCIFA0_SCK), \
+	GPIO_FN(FSICOSLDT3), \
+	GPIO_FN(PORT16_VIO_CKOR),
+	GPIO_FN(SCIFA0_TXD),
+	GPIO_FN(SCIFA7_TXD),
+	GPIO_FN(SCIFA7_RTS_), \
+	GPIO_FN(PORT19_VIO_CKO2),
+	GPIO_FN(GPO0),
+	GPIO_FN(GPO1),
+	GPIO_FN(GPO2), \
+	GPIO_FN(STATUS0),
+	GPIO_FN(GPO3), \
+	GPIO_FN(STATUS1),
+	GPIO_FN(GPO4), \
+	GPIO_FN(STATUS2),
+	GPIO_FN(VINT),
+	GPIO_FN(TCKON),
+	GPIO_FN(XDVFS1), \
+	GPIO_FN(PORT27_I2C_SCL2), \
+	GPIO_FN(PORT27_I2C_SCL3), \
+	GPIO_FN(MFG0_OUT1), \
+	GPIO_FN(PORT27_IROUT),
+	GPIO_FN(XDVFS2), \
+	GPIO_FN(PORT28_I2C_SDA2), \
+	GPIO_FN(PORT28_I2C_SDA3), \
+	GPIO_FN(PORT28_TPU1TO1),
+	GPIO_FN(SIM_RST), \
+	GPIO_FN(PORT29_TPU1TO1),
+	GPIO_FN(SIM_CLK), \
+	GPIO_FN(PORT30_VIO_CKOR),
+	GPIO_FN(SIM_D), \
+	GPIO_FN(PORT31_IROUT),
+	GPIO_FN(SCIFA4_TXD),
+	GPIO_FN(SCIFA4_RXD), \
+	GPIO_FN(XWUP),
+	GPIO_FN(SCIFA4_RTS_),
+	GPIO_FN(SCIFA4_CTS_),
+	GPIO_FN(FSIBOBT), \
+	GPIO_FN(FSIBIBT),
+	GPIO_FN(FSIBOLR), \
+	GPIO_FN(FSIBILR),
+	GPIO_FN(FSIBOSLD),
+	GPIO_FN(FSIBISLD),
+	GPIO_FN(VACK),
+	GPIO_FN(XTAL1L),
+	GPIO_FN(SCIFA0_RTS_), \
+	GPIO_FN(FSICOSLDT2),
+	GPIO_FN(SCIFA0_RXD),
+	GPIO_FN(SCIFA0_CTS_), \
+	GPIO_FN(FSICOSLDT1),
+	GPIO_FN(FSICOBT), \
+	GPIO_FN(FSICIBT), \
+	GPIO_FN(FSIDOBT), \
+	GPIO_FN(FSIDIBT),
+	GPIO_FN(FSICOLR), \
+	GPIO_FN(FSICILR), \
+	GPIO_FN(FSIDOLR), \
+	GPIO_FN(FSIDILR),
+	GPIO_FN(FSICOSLD), \
+	GPIO_FN(PORT47_FSICSPDIF),
+	GPIO_FN(FSICISLD), \
+	GPIO_FN(FSIDISLD),
+	GPIO_FN(FSIACK), \
+	GPIO_FN(PORT49_IRDA_OUT), \
+	GPIO_FN(PORT49_IROUT), \
+	GPIO_FN(FSIAOMC),
+	GPIO_FN(FSIAOLR), \
+	GPIO_FN(BBIF2_TSYNC2), \
+	GPIO_FN(TPU2TO2), \
+	GPIO_FN(FSIAILR),
+
+	GPIO_FN(FSIAOBT), \
+	GPIO_FN(BBIF2_TSCK2), \
+	GPIO_FN(TPU2TO3), \
+	GPIO_FN(FSIAIBT),
+	GPIO_FN(FSIAOSLD), \
+	GPIO_FN(BBIF2_TXD2),
+	GPIO_FN(FSIASPDIF), \
+	GPIO_FN(PORT53_IRDA_IN), \
+	GPIO_FN(TPU3TO3), \
+	GPIO_FN(FSIBSPDIF), \
+	GPIO_FN(PORT53_FSICSPDIF),
+	GPIO_FN(FSIBCK), \
+	GPIO_FN(PORT54_IRDA_FIRSEL), \
+	GPIO_FN(TPU3TO2), \
+	GPIO_FN(FSIBOMC), \
+	GPIO_FN(FSICCK), \
+	GPIO_FN(FSICOMC),
+	GPIO_FN(FSIAISLD), \
+	GPIO_FN(TPU0TO0),
+	GPIO_FN(A0), \
+	GPIO_FN(BS_),
+	GPIO_FN(A12), \
+	GPIO_FN(PORT58_KEYOUT7), \
+	GPIO_FN(TPU4TO2),
+	GPIO_FN(A13), \
+	GPIO_FN(PORT59_KEYOUT6), \
+	GPIO_FN(TPU0TO1),
+	GPIO_FN(A14), \
+	GPIO_FN(KEYOUT5),
+	GPIO_FN(A15), \
+	GPIO_FN(KEYOUT4),
+	GPIO_FN(A16), \
+	GPIO_FN(KEYOUT3), \
+	GPIO_FN(MSIOF0_SS1),
+	GPIO_FN(A17), \
+	GPIO_FN(KEYOUT2), \
+	GPIO_FN(MSIOF0_TSYNC),
+	GPIO_FN(A18), \
+	GPIO_FN(KEYOUT1), \
+	GPIO_FN(MSIOF0_TSCK),
+	GPIO_FN(A19), \
+	GPIO_FN(KEYOUT0), \
+	GPIO_FN(MSIOF0_TXD),
+	GPIO_FN(A20), \
+	GPIO_FN(KEYIN0), \
+	GPIO_FN(MSIOF0_RSCK),
+	GPIO_FN(A21), \
+	GPIO_FN(KEYIN1), \
+	GPIO_FN(MSIOF0_RSYNC),
+	GPIO_FN(A22), \
+	GPIO_FN(KEYIN2), \
+	GPIO_FN(MSIOF0_MCK0),
+	GPIO_FN(A23), \
+	GPIO_FN(KEYIN3), \
+	GPIO_FN(MSIOF0_MCK1),
+	GPIO_FN(A24), \
+	GPIO_FN(KEYIN4), \
+	GPIO_FN(MSIOF0_RXD),
+	GPIO_FN(A25), \
+	GPIO_FN(KEYIN5), \
+	GPIO_FN(MSIOF0_SS2),
+	GPIO_FN(A26), \
+	GPIO_FN(KEYIN6),
+	GPIO_FN(KEYIN7),
+	GPIO_FN(D0_NAF0),
+	GPIO_FN(D1_NAF1),
+	GPIO_FN(D2_NAF2),
+	GPIO_FN(D3_NAF3),
+	GPIO_FN(D4_NAF4),
+	GPIO_FN(D5_NAF5),
+	GPIO_FN(D6_NAF6),
+	GPIO_FN(D7_NAF7),
+	GPIO_FN(D8_NAF8),
+	GPIO_FN(D9_NAF9),
+	GPIO_FN(D10_NAF10),
+	GPIO_FN(D11_NAF11),
+	GPIO_FN(D12_NAF12),
+	GPIO_FN(D13_NAF13),
+	GPIO_FN(D14_NAF14),
+	GPIO_FN(D15_NAF15),
+	GPIO_FN(CS4_),
+	GPIO_FN(CS5A_), \
+	GPIO_FN(PORT91_RDWR),
+	GPIO_FN(CS5B_), \
+	GPIO_FN(FCE1_),
+	GPIO_FN(CS6B_), \
+	GPIO_FN(DACK0),
+	GPIO_FN(FCE0_), \
+	GPIO_FN(CS6A_),
+	GPIO_FN(WAIT_), \
+	GPIO_FN(DREQ0),
+	GPIO_FN(RD__FSC),
+	GPIO_FN(WE0__FWE), \
+	GPIO_FN(RDWR_FWE),
+	GPIO_FN(WE1_),
+	GPIO_FN(FRB),
+	GPIO_FN(CKO),
+	GPIO_FN(NBRSTOUT_),
+	GPIO_FN(NBRST_),
+	GPIO_FN(BBIF2_TXD),
+	GPIO_FN(BBIF2_RXD),
+	GPIO_FN(BBIF2_SYNC),
+	GPIO_FN(BBIF2_SCK),
+	GPIO_FN(SCIFA3_CTS_), \
+	GPIO_FN(MFG3_IN2),
+	GPIO_FN(SCIFA3_RXD), \
+	GPIO_FN(MFG3_IN1),
+	GPIO_FN(BBIF1_SS2), \
+	GPIO_FN(SCIFA3_RTS_), \
+	GPIO_FN(MFG3_OUT1),
+	GPIO_FN(SCIFA3_TXD),
+	GPIO_FN(HSI_RX_DATA), \
+	GPIO_FN(BBIF1_RXD),
+	GPIO_FN(HSI_TX_WAKE), \
+	GPIO_FN(BBIF1_TSCK),
+	GPIO_FN(HSI_TX_DATA), \
+	GPIO_FN(BBIF1_TSYNC),
+	GPIO_FN(HSI_TX_READY), \
+	GPIO_FN(BBIF1_TXD),
+	GPIO_FN(HSI_RX_READY), \
+	GPIO_FN(BBIF1_RSCK), \
+	GPIO_FN(PORT115_I2C_SCL2), \
+	GPIO_FN(PORT115_I2C_SCL3),
+	GPIO_FN(HSI_RX_WAKE), \
+	GPIO_FN(BBIF1_RSYNC), \
+	GPIO_FN(PORT116_I2C_SDA2), \
+	GPIO_FN(PORT116_I2C_SDA3),
+	GPIO_FN(HSI_RX_FLAG), \
+	GPIO_FN(BBIF1_SS1), \
+	GPIO_FN(BBIF1_FLOW),
+	GPIO_FN(HSI_TX_FLAG),
+	GPIO_FN(VIO_VD), \
+	GPIO_FN(PORT128_LCD2VSYN), \
+	GPIO_FN(VIO2_VD), \
+	GPIO_FN(LCD2D0),
+
+	GPIO_FN(VIO_HD), \
+	GPIO_FN(PORT129_LCD2HSYN), \
+	GPIO_FN(PORT129_LCD2CS_), \
+	GPIO_FN(VIO2_HD), \
+	GPIO_FN(LCD2D1),
+	GPIO_FN(VIO_D0), \
+	GPIO_FN(PORT130_MSIOF2_RXD), \
+	GPIO_FN(LCD2D10),
+	GPIO_FN(VIO_D1), \
+	GPIO_FN(PORT131_KEYOUT6), \
+	GPIO_FN(PORT131_MSIOF2_SS1), \
+	GPIO_FN(PORT131_KEYOUT11), \
+	GPIO_FN(LCD2D11),
+	GPIO_FN(VIO_D2), \
+	GPIO_FN(PORT132_KEYOUT7), \
+	GPIO_FN(PORT132_MSIOF2_SS2), \
+	GPIO_FN(PORT132_KEYOUT10), \
+	GPIO_FN(LCD2D12),
+	GPIO_FN(VIO_D3), \
+	GPIO_FN(MSIOF2_TSYNC), \
+	GPIO_FN(LCD2D13),
+	GPIO_FN(VIO_D4), \
+	GPIO_FN(MSIOF2_TXD), \
+	GPIO_FN(LCD2D14),
+	GPIO_FN(VIO_D5), \
+	GPIO_FN(MSIOF2_TSCK), \
+	GPIO_FN(LCD2D15),
+	GPIO_FN(VIO_D6), \
+	GPIO_FN(PORT136_KEYOUT8), \
+	GPIO_FN(LCD2D16),
+	GPIO_FN(VIO_D7), \
+	GPIO_FN(PORT137_KEYOUT9), \
+	GPIO_FN(LCD2D17),
+	GPIO_FN(VIO_D8), \
+	GPIO_FN(PORT138_KEYOUT8), \
+	GPIO_FN(VIO2_D0), \
+	GPIO_FN(LCD2D6),
+	GPIO_FN(VIO_D9), \
+	GPIO_FN(PORT139_KEYOUT9), \
+	GPIO_FN(VIO2_D1), \
+	GPIO_FN(LCD2D7),
+	GPIO_FN(VIO_D10), \
+	GPIO_FN(TPU0TO2), \
+	GPIO_FN(VIO2_D2), \
+	GPIO_FN(LCD2D8),
+	GPIO_FN(VIO_D11), \
+	GPIO_FN(TPU0TO3), \
+	GPIO_FN(VIO2_D3), \
+	GPIO_FN(LCD2D9),
+	GPIO_FN(VIO_D12), \
+	GPIO_FN(PORT142_KEYOUT10), \
+	GPIO_FN(VIO2_D4), \
+	GPIO_FN(LCD2D2),
+	GPIO_FN(VIO_D13), \
+	GPIO_FN(PORT143_KEYOUT11), \
+	GPIO_FN(PORT143_KEYOUT6), \
+	GPIO_FN(VIO2_D5), \
+	GPIO_FN(LCD2D3),
+	GPIO_FN(VIO_D14), \
+	GPIO_FN(PORT144_KEYOUT7), \
+	GPIO_FN(VIO2_D6), \
+	GPIO_FN(LCD2D4),
+	GPIO_FN(VIO_D15), \
+	GPIO_FN(TPU1TO3), \
+	GPIO_FN(PORT145_LCD2DISP), \
+	GPIO_FN(PORT145_LCD2RS), \
+	GPIO_FN(VIO2_D7), \
+	GPIO_FN(LCD2D5),
+	GPIO_FN(VIO_CLK), \
+	GPIO_FN(LCD2DCK), \
+	GPIO_FN(PORT146_LCD2WR_), \
+	GPIO_FN(VIO2_CLK), \
+	GPIO_FN(LCD2D18),
+	GPIO_FN(VIO_FIELD), \
+	GPIO_FN(LCD2RD_), \
+	GPIO_FN(VIO2_FIELD), \
+	GPIO_FN(LCD2D19),
+	GPIO_FN(VIO_CKO),
+	GPIO_FN(A27), \
+	GPIO_FN(PORT149_RDWR), \
+	GPIO_FN(MFG0_IN1), \
+	GPIO_FN(PORT149_KEYOUT9),
+	GPIO_FN(MFG0_IN2),
+	GPIO_FN(TS_SPSYNC3), \
+	GPIO_FN(MSIOF2_RSCK),
+	GPIO_FN(TS_SDAT3), \
+	GPIO_FN(MSIOF2_RSYNC),
+	GPIO_FN(TPU1TO2), \
+	GPIO_FN(TS_SDEN3), \
+	GPIO_FN(PORT153_MSIOF2_SS1),
+	GPIO_FN(SCIFA2_TXD1), \
+	GPIO_FN(MSIOF2_MCK0),
+	GPIO_FN(SCIFA2_RXD1), \
+	GPIO_FN(MSIOF2_MCK1),
+	GPIO_FN(SCIFA2_RTS1_), \
+	GPIO_FN(PORT156_MSIOF2_SS2),
+	GPIO_FN(SCIFA2_CTS1_), \
+	GPIO_FN(PORT157_MSIOF2_RXD),
+	GPIO_FN(DINT_), \
+	GPIO_FN(SCIFA2_SCK1), \
+	GPIO_FN(TS_SCK3),
+	GPIO_FN(PORT159_SCIFB_SCK), \
+	GPIO_FN(PORT159_SCIFA5_SCK), \
+	GPIO_FN(NMI),
+	GPIO_FN(PORT160_SCIFB_TXD), \
+	GPIO_FN(PORT160_SCIFA5_TXD),
+	GPIO_FN(PORT161_SCIFB_CTS_), \
+	GPIO_FN(PORT161_SCIFA5_CTS_),
+	GPIO_FN(PORT162_SCIFB_RXD), \
+	GPIO_FN(PORT162_SCIFA5_RXD),
+	GPIO_FN(PORT163_SCIFB_RTS_), \
+	GPIO_FN(PORT163_SCIFA5_RTS_), \
+	GPIO_FN(TPU3TO0),
+	GPIO_FN(LCDD0),
+	GPIO_FN(LCDD1), \
+	GPIO_FN(PORT193_SCIFA5_CTS_), \
+	GPIO_FN(BBIF2_TSYNC1),
+	GPIO_FN(LCDD2), \
+	GPIO_FN(PORT194_SCIFA5_RTS_), \
+	GPIO_FN(BBIF2_TSCK1),
+	GPIO_FN(LCDD3), \
+	GPIO_FN(PORT195_SCIFA5_RXD), \
+	GPIO_FN(BBIF2_TXD1),
+	GPIO_FN(LCDD4), \
+	GPIO_FN(PORT196_SCIFA5_TXD),
+	GPIO_FN(LCDD5), \
+	GPIO_FN(PORT197_SCIFA5_SCK), \
+	GPIO_FN(MFG2_OUT2), \
+	GPIO_FN(TPU2TO1),
+	GPIO_FN(LCDD6),
+	GPIO_FN(LCDD7), \
+	GPIO_FN(TPU4TO1), \
+	GPIO_FN(MFG4_OUT2),
+	GPIO_FN(LCDD8), \
+	GPIO_FN(D16),
+	GPIO_FN(LCDD9), \
+	GPIO_FN(D17),
+	GPIO_FN(LCDD10), \
+	GPIO_FN(D18),
+	GPIO_FN(LCDD11), \
+	GPIO_FN(D19),
+	GPIO_FN(LCDD12), \
+	GPIO_FN(D20),
+	GPIO_FN(LCDD13), \
+	GPIO_FN(D21),
+	GPIO_FN(LCDD14), \
+	GPIO_FN(D22),
+	GPIO_FN(LCDD15), \
+	GPIO_FN(PORT207_MSIOF0L_SS1), \
+	GPIO_FN(D23),
+	GPIO_FN(LCDD16), \
+	GPIO_FN(PORT208_MSIOF0L_SS2), \
+	GPIO_FN(D24),
+	GPIO_FN(LCDD17), \
+	GPIO_FN(D25),
+	GPIO_FN(LCDD18), \
+	GPIO_FN(DREQ2), \
+	GPIO_FN(PORT210_MSIOF0L_SS1), \
+	GPIO_FN(D26),
+	GPIO_FN(LCDD19), \
+	GPIO_FN(PORT211_MSIOF0L_SS2), \
+	GPIO_FN(D27),
+	GPIO_FN(LCDD20), \
+	GPIO_FN(TS_SPSYNC1), \
+	GPIO_FN(MSIOF0L_MCK0), \
+	GPIO_FN(D28),
+	GPIO_FN(LCDD21), \
+	GPIO_FN(TS_SDAT1), \
+	GPIO_FN(MSIOF0L_MCK1), \
+	GPIO_FN(D29),
+	GPIO_FN(LCDD22), \
+	GPIO_FN(TS_SDEN1), \
+	GPIO_FN(MSIOF0L_RSCK), \
+	GPIO_FN(D30),
+	GPIO_FN(LCDD23), \
+	GPIO_FN(TS_SCK1), \
+	GPIO_FN(MSIOF0L_RSYNC), \
+	GPIO_FN(D31),
+	GPIO_FN(LCDDCK), \
+	GPIO_FN(LCDWR_),
+	GPIO_FN(LCDRD_), \
+	GPIO_FN(DACK2), \
+	GPIO_FN(PORT217_LCD2RS), \
+	GPIO_FN(MSIOF0L_TSYNC), \
+	GPIO_FN(VIO2_FIELD3), \
+	GPIO_FN(PORT217_LCD2DISP),
+	GPIO_FN(LCDHSYN), \
+	GPIO_FN(LCDCS_), \
+	GPIO_FN(LCDCS2_), \
+	GPIO_FN(DACK3), \
+	GPIO_FN(PORT218_VIO_CKOR),
+	GPIO_FN(LCDDISP), \
+	GPIO_FN(LCDRS), \
+	GPIO_FN(PORT219_LCD2WR_), \
+	GPIO_FN(DREQ3), \
+	GPIO_FN(MSIOF0L_TSCK), \
+	GPIO_FN(VIO2_CLK3), \
+	GPIO_FN(LCD2DCK_2),
+	GPIO_FN(LCDVSYN), \
+	GPIO_FN(LCDVSYN2),
+	GPIO_FN(LCDLCLK), \
+	GPIO_FN(DREQ1), \
+	GPIO_FN(PORT221_LCD2CS_), \
+	GPIO_FN(PWEN), \
+	GPIO_FN(MSIOF0L_RXD), \
+	GPIO_FN(VIO2_HD3), \
+	GPIO_FN(PORT221_LCD2HSYN),
+	GPIO_FN(LCDDON), \
+	GPIO_FN(LCDDON2), \
+	GPIO_FN(DACK1), \
+	GPIO_FN(OVCN), \
+	GPIO_FN(MSIOF0L_TXD), \
+	GPIO_FN(VIO2_VD3), \
+	GPIO_FN(PORT222_LCD2VSYN),
+
+	GPIO_FN(SCIFA1_TXD), \
+	GPIO_FN(OVCN2),
+	GPIO_FN(EXTLP), \
+	GPIO_FN(SCIFA1_SCK), \
+	GPIO_FN(PORT226_VIO_CKO2),
+	GPIO_FN(SCIFA1_RTS_), \
+	GPIO_FN(IDIN),
+	GPIO_FN(SCIFA1_RXD),
+	GPIO_FN(SCIFA1_CTS_), \
+	GPIO_FN(MFG1_IN1),
+	GPIO_FN(MSIOF1_TXD), \
+	GPIO_FN(SCIFA2_TXD2),
+	GPIO_FN(MSIOF1_TSYNC), \
+	GPIO_FN(SCIFA2_CTS2_),
+	GPIO_FN(MSIOF1_TSCK), \
+	GPIO_FN(SCIFA2_SCK2),
+	GPIO_FN(MSIOF1_RXD), \
+	GPIO_FN(SCIFA2_RXD2),
+	GPIO_FN(MSIOF1_RSCK), \
+	GPIO_FN(SCIFA2_RTS2_), \
+	GPIO_FN(VIO2_CLK2), \
+	GPIO_FN(LCD2D20),
+	GPIO_FN(MSIOF1_RSYNC), \
+	GPIO_FN(MFG1_IN2), \
+	GPIO_FN(VIO2_VD2), \
+	GPIO_FN(LCD2D21),
+	GPIO_FN(MSIOF1_MCK0), \
+	GPIO_FN(PORT236_I2C_SDA2),
+	GPIO_FN(MSIOF1_MCK1), \
+	GPIO_FN(PORT237_I2C_SCL2),
+	GPIO_FN(MSIOF1_SS1), \
+	GPIO_FN(VIO2_FIELD2), \
+	GPIO_FN(LCD2D22),
+	GPIO_FN(MSIOF1_SS2), \
+	GPIO_FN(VIO2_HD2), \
+	GPIO_FN(LCD2D23),
+	GPIO_FN(SCIFA6_TXD),
+	GPIO_FN(PORT241_IRDA_OUT), \
+	GPIO_FN(PORT241_IROUT), \
+	GPIO_FN(MFG4_OUT1), \
+	GPIO_FN(TPU4TO0),
+	GPIO_FN(PORT242_IRDA_IN), \
+	GPIO_FN(MFG4_IN2),
+	GPIO_FN(PORT243_IRDA_FIRSEL), \
+	GPIO_FN(PORT243_VIO_CKO2),
+	GPIO_FN(PORT244_SCIFA5_CTS_), \
+	GPIO_FN(MFG2_IN1), \
+	GPIO_FN(PORT244_SCIFB_CTS_), \
+	GPIO_FN(MSIOF2R_RXD),
+	GPIO_FN(PORT245_SCIFA5_RTS_), \
+	GPIO_FN(MFG2_IN2), \
+	GPIO_FN(PORT245_SCIFB_RTS_), \
+	GPIO_FN(MSIOF2R_TXD),
+	GPIO_FN(PORT246_SCIFA5_RXD), \
+	GPIO_FN(MFG1_OUT1), \
+	GPIO_FN(PORT246_SCIFB_RXD), \
+	GPIO_FN(TPU1TO0),
+	GPIO_FN(PORT247_SCIFA5_TXD), \
+	GPIO_FN(MFG3_OUT2), \
+	GPIO_FN(PORT247_SCIFB_TXD), \
+	GPIO_FN(TPU3TO1),
+	GPIO_FN(PORT248_SCIFA5_SCK), \
+	GPIO_FN(MFG2_OUT1), \
+	GPIO_FN(PORT248_SCIFB_SCK), \
+	GPIO_FN(TPU2TO0), \
+	GPIO_FN(PORT248_I2C_SCL3), \
+	GPIO_FN(MSIOF2R_TSCK),
+	GPIO_FN(PORT249_IROUT), \
+	GPIO_FN(MFG4_IN1), \
+	GPIO_FN(PORT249_I2C_SDA3), \
+	GPIO_FN(MSIOF2R_TSYNC),
+	GPIO_FN(SDHICLK0),
+	GPIO_FN(SDHICD0),
+	GPIO_FN(SDHID0_0),
+	GPIO_FN(SDHID0_1),
+	GPIO_FN(SDHID0_2),
+	GPIO_FN(SDHID0_3),
+	GPIO_FN(SDHICMD0),
+	GPIO_FN(SDHIWP0),
+	GPIO_FN(SDHICLK1),
+	GPIO_FN(SDHID1_0), \
+	GPIO_FN(TS_SPSYNC2),
+	GPIO_FN(SDHID1_1), \
+	GPIO_FN(TS_SDAT2),
+	GPIO_FN(SDHID1_2), \
+	GPIO_FN(TS_SDEN2),
+	GPIO_FN(SDHID1_3), \
+	GPIO_FN(TS_SCK2),
+	GPIO_FN(SDHICMD1),
+	GPIO_FN(SDHICLK2),
+	GPIO_FN(SDHID2_0), \
+	GPIO_FN(TS_SPSYNC4),
+	GPIO_FN(SDHID2_1), \
+	GPIO_FN(TS_SDAT4),
+	GPIO_FN(SDHID2_2), \
+	GPIO_FN(TS_SDEN4),
+	GPIO_FN(SDHID2_3), \
+	GPIO_FN(TS_SCK4),
+	GPIO_FN(SDHICMD2),
+	GPIO_FN(MMCCLK0),
+	GPIO_FN(MMCD0_0),
+	GPIO_FN(MMCD0_1),
+	GPIO_FN(MMCD0_2),
+	GPIO_FN(MMCD0_3),
+	GPIO_FN(MMCD0_4), \
+	GPIO_FN(TS_SPSYNC5),
+	GPIO_FN(MMCD0_5), \
+	GPIO_FN(TS_SDAT5),
+	GPIO_FN(MMCD0_6), \
+	GPIO_FN(TS_SDEN5),
+	GPIO_FN(MMCD0_7), \
+	GPIO_FN(TS_SCK5),
+	GPIO_FN(MMCCMD0),
+	GPIO_FN(RESETOUTS_), \
+	GPIO_FN(EXTAL2OUT),
+	GPIO_FN(MCP_WAIT__MCP_FRB),
+	GPIO_FN(MCP_CKO), \
+	GPIO_FN(MMCCLK1),
+	GPIO_FN(MCP_D15_MCP_NAF15),
+	GPIO_FN(MCP_D14_MCP_NAF14),
+	GPIO_FN(MCP_D13_MCP_NAF13),
+	GPIO_FN(MCP_D12_MCP_NAF12),
+	GPIO_FN(MCP_D11_MCP_NAF11),
+	GPIO_FN(MCP_D10_MCP_NAF10),
+	GPIO_FN(MCP_D9_MCP_NAF9),
+	GPIO_FN(MCP_D8_MCP_NAF8), \
+	GPIO_FN(MMCCMD1),
+	GPIO_FN(MCP_D7_MCP_NAF7), \
+	GPIO_FN(MMCD1_7),
+
+	GPIO_FN(MCP_D6_MCP_NAF6), \
+	GPIO_FN(MMCD1_6),
+	GPIO_FN(MCP_D5_MCP_NAF5), \
+	GPIO_FN(MMCD1_5),
+	GPIO_FN(MCP_D4_MCP_NAF4), \
+	GPIO_FN(MMCD1_4),
+	GPIO_FN(MCP_D3_MCP_NAF3), \
+	GPIO_FN(MMCD1_3),
+	GPIO_FN(MCP_D2_MCP_NAF2), \
+	GPIO_FN(MMCD1_2),
+	GPIO_FN(MCP_D1_MCP_NAF1), \
+	GPIO_FN(MMCD1_1),
+	GPIO_FN(MCP_D0_MCP_NAF0), \
+	GPIO_FN(MMCD1_0),
+	GPIO_FN(MCP_NBRSTOUT_),
+	GPIO_FN(MCP_WE0__MCP_FWE), \
+	GPIO_FN(MCP_RDWR_MCP_FWE),
+
+	/* MSEL2 special cases */
+	GPIO_FN(TSIF2_TS_XX1),
+	GPIO_FN(TSIF2_TS_XX2),
+	GPIO_FN(TSIF2_TS_XX3),
+	GPIO_FN(TSIF2_TS_XX4),
+	GPIO_FN(TSIF2_TS_XX5),
+	GPIO_FN(TSIF1_TS_XX1),
+	GPIO_FN(TSIF1_TS_XX2),
+	GPIO_FN(TSIF1_TS_XX3),
+	GPIO_FN(TSIF1_TS_XX4),
+	GPIO_FN(TSIF1_TS_XX5),
+	GPIO_FN(TSIF0_TS_XX1),
+	GPIO_FN(TSIF0_TS_XX2),
+	GPIO_FN(TSIF0_TS_XX3),
+	GPIO_FN(TSIF0_TS_XX4),
+	GPIO_FN(TSIF0_TS_XX5),
+	GPIO_FN(MST1_TS_XX1),
+	GPIO_FN(MST1_TS_XX2),
+	GPIO_FN(MST1_TS_XX3),
+	GPIO_FN(MST1_TS_XX4),
+	GPIO_FN(MST1_TS_XX5),
+	GPIO_FN(MST0_TS_XX1),
+	GPIO_FN(MST0_TS_XX2),
+	GPIO_FN(MST0_TS_XX3),
+	GPIO_FN(MST0_TS_XX4),
+	GPIO_FN(MST0_TS_XX5),
+
+	/* MSEL3 special cases */
+	GPIO_FN(SDHI0_VCCQ_MC0_ON),
+	GPIO_FN(SDHI0_VCCQ_MC0_OFF),
+	GPIO_FN(DEBUG_MON_VIO),
+	GPIO_FN(DEBUG_MON_LCDD),
+	GPIO_FN(LCDC_LCDC0),
+	GPIO_FN(LCDC_LCDC1),
+
+	/* MSEL4 special cases */
+	GPIO_FN(IRQ9_MEM_INT),
+	GPIO_FN(IRQ9_MCP_INT),
+	GPIO_FN(A11),
+	GPIO_FN(KEYOUT8),
+	GPIO_FN(TPU4TO3),
+	GPIO_FN(RESETA_N_PU_ON),
+	GPIO_FN(RESETA_N_PU_OFF),
+	GPIO_FN(EDBGREQ_PD),
+	GPIO_FN(EDBGREQ_PU),
+
+	/* Functions with pull-ups */
+	GPIO_FN(KEYIN0_PU),
+	GPIO_FN(KEYIN1_PU),
+	GPIO_FN(KEYIN2_PU),
+	GPIO_FN(KEYIN3_PU),
+	GPIO_FN(KEYIN4_PU),
+	GPIO_FN(KEYIN5_PU),
+	GPIO_FN(KEYIN6_PU),
+	GPIO_FN(KEYIN7_PU),
+	GPIO_FN(SDHID1_0_PU),
+	GPIO_FN(SDHID1_1_PU),
+	GPIO_FN(SDHID1_2_PU),
+	GPIO_FN(SDHID1_3_PU),
+	GPIO_FN(SDHICMD1_PU),
+	GPIO_FN(MMCCMD0_PU),
+	GPIO_FN(MMCCMD1_PU),
+	GPIO_FN(FSIACK_PU),
+	GPIO_FN(FSIAILR_PU),
+	GPIO_FN(FSIAIBT_PU),
+	GPIO_FN(FSIAISLD_PU),
+};
+
+#define PORTCR(nr, reg)	\
+	{ PINMUX_CFG_REG("PORT" nr "CR", reg, 8, 4) { \
+		0, \
+		/*0001*/ PORT##nr##_OUT , \
+		/*0010*/ PORT##nr##_IN , 0, 0, 0, 0, 0, 0, 0, \
+		/*1010*/ PORT##nr##_IN_PD, 0, 0, 0, \
+		/*1110*/ PORT##nr##_IN_PU, 0, \
+		PORT##nr##_FN0, PORT##nr##_FN1,	PORT##nr##_FN2, \
+		PORT##nr##_FN3,	PORT##nr##_FN4, PORT##nr##_FN5, \
+		PORT##nr##_FN6, PORT##nr##_FN7, 0, 0, 0, 0, 0, 0, 0, 0 } \
+	}
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+	PORTCR(0, 0xe6050000), /* PORT0CR */
+	PORTCR(1, 0xe6050001), /* PORT1CR */
+	PORTCR(2, 0xe6050002), /* PORT2CR */
+	PORTCR(3, 0xe6050003), /* PORT3CR */
+	PORTCR(4, 0xe6050004), /* PORT4CR */
+	PORTCR(5, 0xe6050005), /* PORT5CR */
+	PORTCR(6, 0xe6050006), /* PORT6CR */
+	PORTCR(7, 0xe6050007), /* PORT7CR */
+	PORTCR(8, 0xe6050008), /* PORT8CR */
+	PORTCR(9, 0xe6050009), /* PORT9CR */
+
+	PORTCR(10, 0xe605000a), /* PORT10CR */
+	PORTCR(11, 0xe605000b), /* PORT11CR */
+	PORTCR(12, 0xe605000c), /* PORT12CR */
+	PORTCR(13, 0xe605000d), /* PORT13CR */
+	PORTCR(14, 0xe605000e), /* PORT14CR */
+	PORTCR(15, 0xe605000f), /* PORT15CR */
+	PORTCR(16, 0xe6050010), /* PORT16CR */
+	PORTCR(17, 0xe6050011), /* PORT17CR */
+	PORTCR(18, 0xe6050012), /* PORT18CR */
+	PORTCR(19, 0xe6050013), /* PORT19CR */
+
+	PORTCR(20, 0xe6050014), /* PORT20CR */
+	PORTCR(21, 0xe6050015), /* PORT21CR */
+	PORTCR(22, 0xe6050016), /* PORT22CR */
+	PORTCR(23, 0xe6050017), /* PORT23CR */
+	PORTCR(24, 0xe6050018), /* PORT24CR */
+	PORTCR(25, 0xe6050019), /* PORT25CR */
+	PORTCR(26, 0xe605001a), /* PORT26CR */
+	PORTCR(27, 0xe605001b), /* PORT27CR */
+	PORTCR(28, 0xe605001c), /* PORT28CR */
+	PORTCR(29, 0xe605001d), /* PORT29CR */
+
+	PORTCR(30, 0xe605001e), /* PORT30CR */
+	PORTCR(31, 0xe605001f), /* PORT31CR */
+	PORTCR(32, 0xe6051020), /* PORT32CR */
+	PORTCR(33, 0xe6051021), /* PORT33CR */
+	PORTCR(34, 0xe6051022), /* PORT34CR */
+	PORTCR(35, 0xe6051023), /* PORT35CR */
+	PORTCR(36, 0xe6051024), /* PORT36CR */
+	PORTCR(37, 0xe6051025), /* PORT37CR */
+	PORTCR(38, 0xe6051026), /* PORT38CR */
+	PORTCR(39, 0xe6051027), /* PORT39CR */
+
+	PORTCR(40, 0xe6051028), /* PORT40CR */
+	PORTCR(41, 0xe6051029), /* PORT41CR */
+	PORTCR(42, 0xe605102a), /* PORT42CR */
+	PORTCR(43, 0xe605102b), /* PORT43CR */
+	PORTCR(44, 0xe605102c), /* PORT44CR */
+	PORTCR(45, 0xe605102d), /* PORT45CR */
+	PORTCR(46, 0xe605102e), /* PORT46CR */
+	PORTCR(47, 0xe605102f), /* PORT47CR */
+	PORTCR(48, 0xe6051030), /* PORT48CR */
+	PORTCR(49, 0xe6051031), /* PORT49CR */
+
+	PORTCR(50, 0xe6051032), /* PORT50CR */
+	PORTCR(51, 0xe6051033), /* PORT51CR */
+	PORTCR(52, 0xe6051034), /* PORT52CR */
+	PORTCR(53, 0xe6051035), /* PORT53CR */
+	PORTCR(54, 0xe6051036), /* PORT54CR */
+	PORTCR(55, 0xe6051037), /* PORT55CR */
+	PORTCR(56, 0xe6051038), /* PORT56CR */
+	PORTCR(57, 0xe6051039), /* PORT57CR */
+	PORTCR(58, 0xe605103a), /* PORT58CR */
+	PORTCR(59, 0xe605103b), /* PORT59CR */
+
+	PORTCR(60, 0xe605103c), /* PORT60CR */
+	PORTCR(61, 0xe605103d), /* PORT61CR */
+	PORTCR(62, 0xe605103e), /* PORT62CR */
+	PORTCR(63, 0xe605103f), /* PORT63CR */
+	PORTCR(64, 0xe6051040), /* PORT64CR */
+	PORTCR(65, 0xe6051041), /* PORT65CR */
+	PORTCR(66, 0xe6051042), /* PORT66CR */
+	PORTCR(67, 0xe6051043), /* PORT67CR */
+	PORTCR(68, 0xe6051044), /* PORT68CR */
+	PORTCR(69, 0xe6051045), /* PORT69CR */
+
+	PORTCR(70, 0xe6051046), /* PORT70CR */
+	PORTCR(71, 0xe6051047), /* PORT71CR */
+	PORTCR(72, 0xe6051048), /* PORT72CR */
+	PORTCR(73, 0xe6051049), /* PORT73CR */
+	PORTCR(74, 0xe605104a), /* PORT74CR */
+	PORTCR(75, 0xe605104b), /* PORT75CR */
+	PORTCR(76, 0xe605104c), /* PORT76CR */
+	PORTCR(77, 0xe605104d), /* PORT77CR */
+	PORTCR(78, 0xe605104e), /* PORT78CR */
+	PORTCR(79, 0xe605104f), /* PORT79CR */
+
+	PORTCR(80, 0xe6051050), /* PORT80CR */
+	PORTCR(81, 0xe6051051), /* PORT81CR */
+	PORTCR(82, 0xe6051052), /* PORT82CR */
+	PORTCR(83, 0xe6051053), /* PORT83CR */
+	PORTCR(84, 0xe6051054), /* PORT84CR */
+	PORTCR(85, 0xe6051055), /* PORT85CR */
+	PORTCR(86, 0xe6051056), /* PORT86CR */
+	PORTCR(87, 0xe6051057), /* PORT87CR */
+	PORTCR(88, 0xe6051058), /* PORT88CR */
+	PORTCR(89, 0xe6051059), /* PORT89CR */
+
+	PORTCR(90, 0xe605105a), /* PORT90CR */
+	PORTCR(91, 0xe605105b), /* PORT91CR */
+	PORTCR(92, 0xe605105c), /* PORT92CR */
+	PORTCR(93, 0xe605105d), /* PORT93CR */
+	PORTCR(94, 0xe605105e), /* PORT94CR */
+	PORTCR(95, 0xe605105f), /* PORT95CR */
+	PORTCR(96, 0xe6052060), /* PORT96CR */
+	PORTCR(97, 0xe6052061), /* PORT97CR */
+	PORTCR(98, 0xe6052062), /* PORT98CR */
+	PORTCR(99, 0xe6052063), /* PORT99CR */
+
+	PORTCR(100, 0xe6052064), /* PORT100CR */
+	PORTCR(101, 0xe6052065), /* PORT101CR */
+	PORTCR(102, 0xe6052066), /* PORT102CR */
+	PORTCR(103, 0xe6052067), /* PORT103CR */
+	PORTCR(104, 0xe6052068), /* PORT104CR */
+	PORTCR(105, 0xe6052069), /* PORT105CR */
+	PORTCR(106, 0xe605206a), /* PORT106CR */
+	PORTCR(107, 0xe605206b), /* PORT107CR */
+	PORTCR(108, 0xe605206c), /* PORT108CR */
+	PORTCR(109, 0xe605206d), /* PORT109CR */
+
+	PORTCR(110, 0xe605206e), /* PORT110CR */
+	PORTCR(111, 0xe605206f), /* PORT111CR */
+	PORTCR(112, 0xe6052070), /* PORT112CR */
+	PORTCR(113, 0xe6052071), /* PORT113CR */
+	PORTCR(114, 0xe6052072), /* PORT114CR */
+	PORTCR(115, 0xe6052073), /* PORT115CR */
+	PORTCR(116, 0xe6052074), /* PORT116CR */
+	PORTCR(117, 0xe6052075), /* PORT117CR */
+	PORTCR(118, 0xe6052076), /* PORT118CR */
+
+	PORTCR(128, 0xe6052080), /* PORT128CR */
+	PORTCR(129, 0xe6052081), /* PORT129CR */
+
+	PORTCR(130, 0xe6052082), /* PORT130CR */
+	PORTCR(131, 0xe6052083), /* PORT131CR */
+	PORTCR(132, 0xe6052084), /* PORT132CR */
+	PORTCR(133, 0xe6052085), /* PORT133CR */
+	PORTCR(134, 0xe6052086), /* PORT134CR */
+	PORTCR(135, 0xe6052087), /* PORT135CR */
+	PORTCR(136, 0xe6052088), /* PORT136CR */
+	PORTCR(137, 0xe6052089), /* PORT137CR */
+	PORTCR(138, 0xe605208a), /* PORT138CR */
+	PORTCR(139, 0xe605208b), /* PORT139CR */
+
+	PORTCR(140, 0xe605208c), /* PORT140CR */
+	PORTCR(141, 0xe605208d), /* PORT141CR */
+	PORTCR(142, 0xe605208e), /* PORT142CR */
+	PORTCR(143, 0xe605208f), /* PORT143CR */
+	PORTCR(144, 0xe6052090), /* PORT144CR */
+	PORTCR(145, 0xe6052091), /* PORT145CR */
+	PORTCR(146, 0xe6052092), /* PORT146CR */
+	PORTCR(147, 0xe6052093), /* PORT147CR */
+	PORTCR(148, 0xe6052094), /* PORT148CR */
+	PORTCR(149, 0xe6052095), /* PORT149CR */
+
+	PORTCR(150, 0xe6052096), /* PORT150CR */
+	PORTCR(151, 0xe6052097), /* PORT151CR */
+	PORTCR(152, 0xe6052098), /* PORT152CR */
+	PORTCR(153, 0xe6052099), /* PORT153CR */
+	PORTCR(154, 0xe605209a), /* PORT154CR */
+	PORTCR(155, 0xe605209b), /* PORT155CR */
+	PORTCR(156, 0xe605209c), /* PORT156CR */
+	PORTCR(157, 0xe605209d), /* PORT157CR */
+	PORTCR(158, 0xe605209e), /* PORT158CR */
+	PORTCR(159, 0xe605209f), /* PORT159CR */
+
+	PORTCR(160, 0xe60520a0), /* PORT160CR */
+	PORTCR(161, 0xe60520a1), /* PORT161CR */
+	PORTCR(162, 0xe60520a2), /* PORT162CR */
+	PORTCR(163, 0xe60520a3), /* PORT163CR */
+	PORTCR(164, 0xe60520a4), /* PORT164CR */
+
+	PORTCR(192, 0xe60520c0), /* PORT192CR */
+	PORTCR(193, 0xe60520c1), /* PORT193CR */
+	PORTCR(194, 0xe60520c2), /* PORT194CR */
+	PORTCR(195, 0xe60520c3), /* PORT195CR */
+	PORTCR(196, 0xe60520c4), /* PORT196CR */
+	PORTCR(197, 0xe60520c5), /* PORT197CR */
+	PORTCR(198, 0xe60520c6), /* PORT198CR */
+	PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+	PORTCR(200, 0xe60520c8), /* PORT200CR */
+	PORTCR(201, 0xe60520c9), /* PORT201CR */
+	PORTCR(202, 0xe60520ca), /* PORT202CR */
+	PORTCR(203, 0xe60520cb), /* PORT203CR */
+	PORTCR(204, 0xe60520cc), /* PORT204CR */
+	PORTCR(205, 0xe60520cd), /* PORT205CR */
+	PORTCR(206, 0xe60520ce), /* PORT206CR */
+	PORTCR(207, 0xe60520cf), /* PORT207CR */
+	PORTCR(208, 0xe60520d0), /* PORT208CR */
+	PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+	PORTCR(210, 0xe60520d2), /* PORT210CR */
+	PORTCR(211, 0xe60520d3), /* PORT211CR */
+	PORTCR(212, 0xe60520d4), /* PORT212CR */
+	PORTCR(213, 0xe60520d5), /* PORT213CR */
+	PORTCR(214, 0xe60520d6), /* PORT214CR */
+	PORTCR(215, 0xe60520d7), /* PORT215CR */
+	PORTCR(216, 0xe60520d8), /* PORT216CR */
+	PORTCR(217, 0xe60520d9), /* PORT217CR */
+	PORTCR(218, 0xe60520da), /* PORT218CR */
+	PORTCR(219, 0xe60520db), /* PORT219CR */
+
+	PORTCR(220, 0xe60520dc), /* PORT220CR */
+	PORTCR(221, 0xe60520dd), /* PORT221CR */
+	PORTCR(222, 0xe60520de), /* PORT222CR */
+	PORTCR(223, 0xe60520df), /* PORT223CR */
+	PORTCR(224, 0xe60530e0), /* PORT224CR */
+	PORTCR(225, 0xe60530e1), /* PORT225CR */
+	PORTCR(226, 0xe60530e2), /* PORT226CR */
+	PORTCR(227, 0xe60530e3), /* PORT227CR */
+	PORTCR(228, 0xe60530e4), /* PORT228CR */
+	PORTCR(229, 0xe60530e5), /* PORT229CR */
+
+	PORTCR(230, 0xe60530e6), /* PORT230CR */
+	PORTCR(231, 0xe60530e7), /* PORT231CR */
+	PORTCR(232, 0xe60530e8), /* PORT232CR */
+	PORTCR(233, 0xe60530e9), /* PORT233CR */
+	PORTCR(234, 0xe60530ea), /* PORT234CR */
+	PORTCR(235, 0xe60530eb), /* PORT235CR */
+	PORTCR(236, 0xe60530ec), /* PORT236CR */
+	PORTCR(237, 0xe60530ed), /* PORT237CR */
+	PORTCR(238, 0xe60530ee), /* PORT238CR */
+	PORTCR(239, 0xe60530ef), /* PORT239CR */
+
+	PORTCR(240, 0xe60530f0), /* PORT240CR */
+	PORTCR(241, 0xe60530f1), /* PORT241CR */
+	PORTCR(242, 0xe60530f2), /* PORT242CR */
+	PORTCR(243, 0xe60530f3), /* PORT243CR */
+	PORTCR(244, 0xe60530f4), /* PORT244CR */
+	PORTCR(245, 0xe60530f5), /* PORT245CR */
+	PORTCR(246, 0xe60530f6), /* PORT246CR */
+	PORTCR(247, 0xe60530f7), /* PORT247CR */
+	PORTCR(248, 0xe60530f8), /* PORT248CR */
+	PORTCR(249, 0xe60530f9), /* PORT249CR */
+
+	PORTCR(250, 0xe60530fa), /* PORT250CR */
+	PORTCR(251, 0xe60530fb), /* PORT251CR */
+	PORTCR(252, 0xe60530fc), /* PORT252CR */
+	PORTCR(253, 0xe60530fd), /* PORT253CR */
+	PORTCR(254, 0xe60530fe), /* PORT254CR */
+	PORTCR(255, 0xe60530ff), /* PORT255CR */
+	PORTCR(256, 0xe6053100), /* PORT256CR */
+	PORTCR(257, 0xe6053101), /* PORT257CR */
+	PORTCR(258, 0xe6053102), /* PORT258CR */
+	PORTCR(259, 0xe6053103), /* PORT259CR */
+
+	PORTCR(260, 0xe6053104), /* PORT260CR */
+	PORTCR(261, 0xe6053105), /* PORT261CR */
+	PORTCR(262, 0xe6053106), /* PORT262CR */
+	PORTCR(263, 0xe6053107), /* PORT263CR */
+	PORTCR(264, 0xe6053108), /* PORT264CR */
+	PORTCR(265, 0xe6053109), /* PORT265CR */
+	PORTCR(266, 0xe605310a), /* PORT266CR */
+	PORTCR(267, 0xe605310b), /* PORT267CR */
+	PORTCR(268, 0xe605310c), /* PORT268CR */
+	PORTCR(269, 0xe605310d), /* PORT269CR */
+
+	PORTCR(270, 0xe605310e), /* PORT270CR */
+	PORTCR(271, 0xe605310f), /* PORT271CR */
+	PORTCR(272, 0xe6053110), /* PORT272CR */
+	PORTCR(273, 0xe6053111), /* PORT273CR */
+	PORTCR(274, 0xe6053112), /* PORT274CR */
+	PORTCR(275, 0xe6053113), /* PORT275CR */
+	PORTCR(276, 0xe6053114), /* PORT276CR */
+	PORTCR(277, 0xe6053115), /* PORT277CR */
+	PORTCR(278, 0xe6053116), /* PORT278CR */
+	PORTCR(279, 0xe6053117), /* PORT279CR */
+
+	PORTCR(280, 0xe6053118), /* PORT280CR */
+	PORTCR(281, 0xe6053119), /* PORT281CR */
+	PORTCR(282, 0xe605311a), /* PORT282CR */
+
+	PORTCR(288, 0xe6052120), /* PORT288CR */
+	PORTCR(289, 0xe6052121), /* PORT289CR */
+
+	PORTCR(290, 0xe6052122), /* PORT290CR */
+	PORTCR(291, 0xe6052123), /* PORT291CR */
+	PORTCR(292, 0xe6052124), /* PORT292CR */
+	PORTCR(293, 0xe6052125), /* PORT293CR */
+	PORTCR(294, 0xe6052126), /* PORT294CR */
+	PORTCR(295, 0xe6052127), /* PORT295CR */
+	PORTCR(296, 0xe6052128), /* PORT296CR */
+	PORTCR(297, 0xe6052129), /* PORT297CR */
+	PORTCR(298, 0xe605212a), /* PORT298CR */
+	PORTCR(299, 0xe605212b), /* PORT299CR */
+
+	PORTCR(300, 0xe605212c), /* PORT300CR */
+	PORTCR(301, 0xe605212d), /* PORT301CR */
+	PORTCR(302, 0xe605212e), /* PORT302CR */
+	PORTCR(303, 0xe605212f), /* PORT303CR */
+	PORTCR(304, 0xe6052130), /* PORT304CR */
+	PORTCR(305, 0xe6052131), /* PORT305CR */
+	PORTCR(306, 0xe6052132), /* PORT306CR */
+	PORTCR(307, 0xe6052133), /* PORT307CR */
+	PORTCR(308, 0xe6052134), /* PORT308CR */
+	PORTCR(309, 0xe6052135), /* PORT309CR */
+
+	{ PINMUX_CFG_REG("MSEL2CR", 0xe605801c, 32, 1) {
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
+			MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
+			MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1,
+			MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1,
+			0, 0,
+			MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1,
+			MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1,
+			MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1,
+			MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1,
+			MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1,
+			MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1,
+			MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1,
+			MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1,
+			MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1,
+			MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1,
+			MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1,
+			MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1,
+			MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1,
+			MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1,
+			MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1,
+		}
+	},
+	{ PINMUX_CFG_REG("MSEL3CR", 0xe6058020, 32, 1) {
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1,
+			0, 0,
+			MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1,
+			0, 0,
+			0, 0,
+			MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1,
+			0, 0,
+			0, 0,
+		}
+	},
+	{ PINMUX_CFG_REG("MSEL4CR", 0xe6058024, 32, 1) {
+			0, 0,
+			0, 0,
+			MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1,
+			0, 0,
+			MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1,
+			MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1,
+			MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1,
+			MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1,
+			MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1,
+			0, 0,
+			0, 0,
+			0, 0,
+			MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1,
+			0, 0,
+			MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1,
+			MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1,
+			MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1,
+			MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1,
+			MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1,
+			MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1,
+			MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1,
+			0, 0,
+			0, 0,
+			MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1,
+			0, 0,
+			0, 0,
+			MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1,
+			0, 0,
+		}
+	},
+	{ },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+	{ PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+			PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+			PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+			PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+			PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+			PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+			PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+			PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+			PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD063_032DR", 0xe6055000, 32) {
+			PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+			PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+			PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+			PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+			PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+			PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+			PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+			PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTD095_064DR", 0xe6055004, 32) {
+			PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+			PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+			PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+			PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+			PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+			PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+			PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+			PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR127_096DR", 0xe6056000, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+			PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+			PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+			PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+			PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+			PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR159_128DR", 0xe6056004, 32) {
+			PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+			PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+			PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+			PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+			PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+			PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+			PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+			PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR191_160DR", 0xe6056008, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, 0, PORT164_DATA,
+			PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR223_192DR", 0xe605600C, 32) {
+			PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+			PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+			PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+			PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+			PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+			PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+			PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+			PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
+			PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+			PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+			PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+			PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+			PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+			PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+			PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+			PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
+			0, 0, 0, 0,
+			0, PORT282_DATA, PORT281_DATA, PORT280_DATA,
+			PORT279_DATA, PORT278_DATA, PORT277_DATA, PORT276_DATA,
+			PORT275_DATA, PORT274_DATA, PORT273_DATA, PORT272_DATA,
+			PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
+			PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
+			PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+			PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+	},
+	{ PINMUX_DATA_REG("PORTR319_288DR", 0xe6056010, 32) {
+			0, 0, 0, 0,
+			0, 0, 0, 0,
+			0, 0, PORT309_DATA, PORT308_DATA,
+			PORT307_DATA, PORT306_DATA, PORT305_DATA, PORT304_DATA,
+			PORT303_DATA, PORT302_DATA, PORT301_DATA, PORT300_DATA,
+			PORT299_DATA, PORT298_DATA, PORT297_DATA, PORT296_DATA,
+			PORT295_DATA, PORT294_DATA, PORT293_DATA, PORT292_DATA,
+			PORT291_DATA, PORT290_DATA, PORT289_DATA, PORT288_DATA }
+	},
+	{ },
+};
+
+static struct pinmux_info sh73a0_pinmux_info = {
+	.name = "sh73a0_pfc",
+	.reserved_id = PINMUX_RESERVED,
+	.data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+	.input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+	.input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+	.input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+	.output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+	.mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+	.first_gpio = GPIO_PORT0,
+	.last_gpio = GPIO_FN_FSIAISLD_PU,
+
+	.gpios = pinmux_gpios,
+	.cfg_regs = pinmux_config_regs,
+	.data_regs = pinmux_data_regs,
+
+	.gpio_data = pinmux_data,
+	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+};
+
+void sh73a0_pinmux_init(void)
+{
+	register_pinmux(&sh73a0_pinmux_info);
+}
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
new file mode 100644
index 00000000000..65e879bab4d
--- /dev/null
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -0,0 +1,70 @@
+/*
+ * SMP support for R-Mobile / SH-Mobile
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2011  Paul Mundt
+ *
+ * Based on vexpress, Copyright (C) 2002 ARM Ltd, All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/localtimer.h>
+#include <asm/mach-types.h>
+#include <mach/common.h>
+
+static unsigned int __init shmobile_smp_get_core_count(void)
+{
+	if (machine_is_ag5evm())
+		return sh73a0_get_core_count();
+
+	return 1;
+}
+
+static void __init shmobile_smp_prepare_cpus(void)
+{
+	if (machine_is_ag5evm())
+		sh73a0_smp_prepare_cpus();
+}
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	if (machine_is_ag5evm())
+		sh73a0_secondary_init(cpu);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	if (machine_is_ag5evm())
+		return sh73a0_boot_secondary(cpu);
+
+	return -ENOSYS;
+}
+
+void __init smp_init_cpus(void)
+{
+	unsigned int ncores = shmobile_smp_get_core_count();
+	unsigned int i;
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int i;
+
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	shmobile_smp_prepare_cpus();
+}
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 564a6d0be47..2e3e11ee7c4 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -416,6 +416,16 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
 		.addr		= 0xe6870030,
 		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_16BIT),
 		.mid_rid	= 0xce,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
+		.addr		= 0xe6bd0034,
+		.chcr		= DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd1,
+	}, {
+		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
+		.addr		= 0xe6bd0034,
+		.chcr		= DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL(XMIT_SZ_32BIT),
+		.mid_rid	= 0xd2,
 	},
 };
 
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
new file mode 100644
index 00000000000..f1eff8b37bd
--- /dev/null
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -0,0 +1,412 @@
+/*
+ * sh73a0 processor support
+ *
+ * Copyright (C) 2010  Takashi Yoshii
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/serial_sci.h>
+#include <linux/sh_intc.h>
+#include <linux/sh_timer.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct plat_sci_port scif0_platform_data = {
+	.mapbase	= 0xe6c40000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIFA,
+	.irqs		= { gic_spi(72), gic_spi(72),
+			    gic_spi(72), gic_spi(72) },
+};
+
+static struct platform_device scif0_device = {
+	.name		= "sh-sci",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &scif0_platform_data,
+	},
+};
+
+static struct plat_sci_port scif1_platform_data = {
+	.mapbase	= 0xe6c50000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIFA,
+	.irqs		= { gic_spi(73), gic_spi(73),
+			    gic_spi(73), gic_spi(73) },
+};
+
+static struct platform_device scif1_device = {
+	.name		= "sh-sci",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &scif1_platform_data,
+	},
+};
+
+static struct plat_sci_port scif2_platform_data = {
+	.mapbase	= 0xe6c60000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIFA,
+	.irqs		= { gic_spi(74), gic_spi(74),
+			    gic_spi(74), gic_spi(74) },
+};
+
+static struct platform_device scif2_device = {
+	.name		= "sh-sci",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &scif2_platform_data,
+	},
+};
+
+static struct plat_sci_port scif3_platform_data = {
+	.mapbase	= 0xe6c70000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIFA,
+	.irqs		= { gic_spi(75), gic_spi(75),
+			    gic_spi(75), gic_spi(75) },
+};
+
+static struct platform_device scif3_device = {
+	.name		= "sh-sci",
+	.id		= 3,
+	.dev		= {
+		.platform_data	= &scif3_platform_data,
+	},
+};
+
+static struct plat_sci_port scif4_platform_data = {
+	.mapbase	= 0xe6c80000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIFA,
+	.irqs		= { gic_spi(78), gic_spi(78),
+			    gic_spi(78), gic_spi(78) },
+};
+
+static struct platform_device scif4_device = {
+	.name		= "sh-sci",
+	.id		= 4,
+	.dev		= {
+		.platform_data	= &scif4_platform_data,
+	},
+};
+
+static struct plat_sci_port scif5_platform_data = {
+	.mapbase	= 0xe6cb0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIFA,
+	.irqs		= { gic_spi(79), gic_spi(79),
+			    gic_spi(79), gic_spi(79) },
+};
+
+static struct platform_device scif5_device = {
+	.name		= "sh-sci",
+	.id		= 5,
+	.dev		= {
+		.platform_data	= &scif5_platform_data,
+	},
+};
+
+static struct plat_sci_port scif6_platform_data = {
+	.mapbase	= 0xe6cc0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIFA,
+	.irqs		= { gic_spi(156), gic_spi(156),
+			    gic_spi(156), gic_spi(156) },
+};
+
+static struct platform_device scif6_device = {
+	.name		= "sh-sci",
+	.id		= 6,
+	.dev		= {
+		.platform_data	= &scif6_platform_data,
+	},
+};
+
+static struct plat_sci_port scif7_platform_data = {
+	.mapbase	= 0xe6cd0000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIFA,
+	.irqs		= { gic_spi(143), gic_spi(143),
+			    gic_spi(143), gic_spi(143) },
+};
+
+static struct platform_device scif7_device = {
+	.name		= "sh-sci",
+	.id		= 7,
+	.dev		= {
+		.platform_data	= &scif7_platform_data,
+	},
+};
+
+static struct plat_sci_port scif8_platform_data = {
+	.mapbase	= 0xe6c30000,
+	.flags		= UPF_BOOT_AUTOCONF,
+	.type		= PORT_SCIFB,
+	.irqs		= { gic_spi(80), gic_spi(80),
+			    gic_spi(80), gic_spi(80) },
+};
+
+static struct platform_device scif8_device = {
+	.name		= "sh-sci",
+	.id		= 8,
+	.dev		= {
+		.platform_data	= &scif8_platform_data,
+	},
+};
+
+static struct sh_timer_config cmt10_platform_data = {
+	.name = "CMT10",
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.clockevent_rating = 125,
+	.clocksource_rating = 125,
+};
+
+static struct resource cmt10_resources[] = {
+	[0] = {
+		.name	= "CMT10",
+		.start	= 0xe6138010,
+		.end	= 0xe613801b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(65),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cmt10_device = {
+	.name		= "sh_cmt",
+	.id		= 10,
+	.dev = {
+		.platform_data	= &cmt10_platform_data,
+	},
+	.resource	= cmt10_resources,
+	.num_resources	= ARRAY_SIZE(cmt10_resources),
+};
+
+/* TMU */
+static struct sh_timer_config tmu00_platform_data = {
+	.name = "TMU00",
+	.channel_offset = 0x4,
+	.timer_bit = 0,
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu00_resources[] = {
+	[0] = {
+		.name	= "TMU00",
+		.start	= 0xfff60008,
+		.end	= 0xfff60013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x0e80), /* TMU0_TUNI00 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu00_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu00_platform_data,
+	},
+	.resource	= tmu00_resources,
+	.num_resources	= ARRAY_SIZE(tmu00_resources),
+};
+
+static struct sh_timer_config tmu01_platform_data = {
+	.name = "TMU01",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu01_resources[] = {
+	[0] = {
+		.name	= "TMU01",
+		.start	= 0xfff60014,
+		.end	= 0xfff6001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x0ea0), /* TMU0_TUNI01 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu01_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu01_platform_data,
+	},
+	.resource	= tmu01_resources,
+	.num_resources	= ARRAY_SIZE(tmu01_resources),
+};
+
+static struct resource i2c0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start	= 0xe6820000,
+		.end	= 0xe6820425 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(167),
+		.end	= gic_spi(170),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c1_resources[] = {
+	[0] = {
+		.name	= "IIC1",
+		.start	= 0xe6822000,
+		.end	= 0xe6822425 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(51),
+		.end	= gic_spi(54),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c2_resources[] = {
+	[0] = {
+		.name	= "IIC2",
+		.start	= 0xe6824000,
+		.end	= 0xe6824425 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(171),
+		.end	= gic_spi(174),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c3_resources[] = {
+	[0] = {
+		.name	= "IIC3",
+		.start	= 0xe6826000,
+		.end	= 0xe6826425 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(183),
+		.end	= gic_spi(186),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource i2c4_resources[] = {
+	[0] = {
+		.name	= "IIC4",
+		.start	= 0xe6828000,
+		.end	= 0xe6828425 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(187),
+		.end	= gic_spi(190),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c0_device = {
+	.name		= "i2c-sh_mobile",
+	.id		= 0,
+	.resource	= i2c0_resources,
+	.num_resources	= ARRAY_SIZE(i2c0_resources),
+};
+
+static struct platform_device i2c1_device = {
+	.name		= "i2c-sh_mobile",
+	.id		= 1,
+	.resource	= i2c1_resources,
+	.num_resources	= ARRAY_SIZE(i2c1_resources),
+};
+
+static struct platform_device i2c2_device = {
+	.name		= "i2c-sh_mobile",
+	.id		= 2,
+	.resource	= i2c2_resources,
+	.num_resources	= ARRAY_SIZE(i2c2_resources),
+};
+
+static struct platform_device i2c3_device = {
+	.name		= "i2c-sh_mobile",
+	.id		= 3,
+	.resource	= i2c3_resources,
+	.num_resources	= ARRAY_SIZE(i2c3_resources),
+};
+
+static struct platform_device i2c4_device = {
+	.name		= "i2c-sh_mobile",
+	.id		= 4,
+	.resource	= i2c4_resources,
+	.num_resources	= ARRAY_SIZE(i2c4_resources),
+};
+
+static struct platform_device *sh73a0_early_devices[] __initdata = {
+	&scif0_device,
+	&scif1_device,
+	&scif2_device,
+	&scif3_device,
+	&scif4_device,
+	&scif5_device,
+	&scif6_device,
+	&scif7_device,
+	&scif8_device,
+	&cmt10_device,
+	&tmu00_device,
+	&tmu01_device,
+};
+
+static struct platform_device *sh73a0_late_devices[] __initdata = {
+	&i2c0_device,
+	&i2c1_device,
+	&i2c2_device,
+	&i2c3_device,
+	&i2c4_device,
+};
+
+void __init sh73a0_add_standard_devices(void)
+{
+	platform_add_devices(sh73a0_early_devices,
+			    ARRAY_SIZE(sh73a0_early_devices));
+	platform_add_devices(sh73a0_late_devices,
+			    ARRAY_SIZE(sh73a0_late_devices));
+}
+
+void __init sh73a0_add_early_devices(void)
+{
+	early_platform_add_devices(sh73a0_early_devices,
+				   ARRAY_SIZE(sh73a0_early_devices));
+}
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
new file mode 100644
index 00000000000..a156d2108df
--- /dev/null
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -0,0 +1,97 @@
+/*
+ * SMP support for R-Mobile / SH-Mobile - sh73a0 portion
+ *
+ * Copyright (C) 2010  Magnus Damm
+ * Copyright (C) 2010  Takashi Yoshii
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <mach/common.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_twd.h>
+#include <asm/hardware/gic.h>
+
+#define WUPCR		0xe6151010
+#define SRESCR		0xe6151018
+#define PSTR		0xe6151040
+#define SBAR            0xe6180020
+#define APARMBAREA      0xe6f10020
+
+static void __iomem *scu_base_addr(void)
+{
+	return (void __iomem *)0xf0000000;
+}
+
+static DEFINE_SPINLOCK(scu_lock);
+static unsigned long tmp;
+
+static void modify_scu_cpu_psr(unsigned long set, unsigned long clr)
+{
+	void __iomem *scu_base = scu_base_addr();
+
+	spin_lock(&scu_lock);
+	tmp = __raw_readl(scu_base + 8);
+	tmp &= ~clr;
+	tmp |= set;
+	spin_unlock(&scu_lock);
+
+	/* disable cache coherency after releasing the lock */
+	__raw_writel(tmp, scu_base + 8);
+}
+
+unsigned int __init sh73a0_get_core_count(void)
+{
+	void __iomem *scu_base = scu_base_addr();
+
+	return scu_get_core_count(scu_base);
+}
+
+void __cpuinit sh73a0_secondary_init(unsigned int cpu)
+{
+	gic_secondary_init(0);
+}
+
+int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
+{
+	/* enable cache coherency */
+	modify_scu_cpu_psr(0, 3 << (cpu * 8));
+
+	if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+		__raw_writel(1 << cpu, __io(WUPCR));	/* wake up */
+	else
+		__raw_writel(1 << cpu, __io(SRESCR));	/* reset */
+
+	return 0;
+}
+
+void __init sh73a0_smp_prepare_cpus(void)
+{
+#ifdef CONFIG_HAVE_ARM_TWD
+	twd_base = (void __iomem *)0xf0000600;
+#endif
+
+	scu_enable(scu_base_addr());
+
+	/* Map the reset vector (in headsmp.S) */
+	__raw_writel(0, __io(APARMBAREA));      /* 4k */
+	__raw_writel(__pa(shmobile_secondary_vector), __io(SBAR));
+
+	/* enable cache coherency on CPU0 */
+	modify_scu_cpu_psr(0, 3 << (0 * 8));
+}
diff --git a/arch/arm/mach-tcc8k/clock.c b/arch/arm/mach-tcc8k/clock.c
index ba32a15127a..3970a9cdce2 100644
--- a/arch/arm/mach-tcc8k/clock.c
+++ b/arch/arm/mach-tcc8k/clock.c
@@ -12,8 +12,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
-
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #include <mach/clock.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c
index 78d06008841..e0a8d609afe 100644
--- a/arch/arm/mach-tcc8k/time.c
+++ b/arch/arm/mach-tcc8k/time.c
@@ -35,7 +35,6 @@ static struct clocksource clocksource_tcc = {
 	.rating		= 200,
 	.read		= tcc_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 28,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -103,9 +102,7 @@ static int __init tcc_clockevent_init(struct clk *clock)
 {
 	unsigned int c = clk_get_rate(clock);
 
-	clocksource_tcc.mult = clocksource_hz2mult(c,
-					clocksource_tcc.shift);
-	clocksource_register(&clocksource_tcc);
+	clocksource_register_hz(&clocksource_tcc, c);
 
 	clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC,
 					clockevent_tcc.shift);
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index ae19f95585b..77948e0f490 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/seq_file.h>
 #include <linux/regulator/consumer.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #include "clock.h"
 #include "board.h"
diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h
index 94fd859770f..083a4cfc6cf 100644
--- a/arch/arm/mach-tegra/clock.h
+++ b/arch/arm/mach-tegra/clock.h
@@ -21,7 +21,7 @@
 #define __MACH_TEGRA_CLOCK_H
 
 #include <linux/list.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #define DIV_BUS			(1 << 0)
 #define DIV_U71			(1 << 1)
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index 8e7f115aa21..a5cb1ce76ff 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -11,12 +11,9 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 
-static DECLARE_COMPLETION(cpu_killed);
-
 static inline void cpu_enter_lowpower(void)
 {
 	unsigned int v;
@@ -29,13 +26,13 @@ static inline void cpu_enter_lowpower(void)
 	 * Turn off coherency
 	 */
 	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, #0x20\n"
+	"	bic	%0, %0, %2\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	"	mrc	p15, 0, %0, c1, c0, 0\n"
 	"	bic	%0, %0, #0x04\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	  : "=&r" (v)
-	  : "r" (0)
+	  : "r" (0), "Ir" (CR_C)
 	  : "cc");
 }
 
@@ -45,17 +42,17 @@ static inline void cpu_leave_lowpower(void)
 
 	asm volatile(
 	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, #0x04\n"
+	"	orr	%0, %0, %1\n"
 	"	mcr	p15, 0, %0, c1, c0, 0\n"
 	"	mrc	p15, 0, %0, c1, c0, 1\n"
 	"	orr	%0, %0, #0x20\n"
 	"	mcr	p15, 0, %0, c1, c0, 1\n"
 	  : "=&r" (v)
-	  :
+	  : "Ir" (CR_C)
 	  : "cc");
 }
 
-static inline void platform_do_lowpower(unsigned int cpu)
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
 {
 	/*
 	 * there is no power-control hardware on this platform, so all
@@ -79,22 +76,19 @@ static inline void platform_do_lowpower(unsigned int cpu)
 		/*}*/
 
 		/*
-		 * getting here, means that we have come out of WFI without
+		 * Getting here, means that we have come out of WFI without
 		 * having been woken up - this shouldn't happen
 		 *
-		 * The trouble is, letting people know about this is not really
-		 * possible, since we are currently running incoherently, and
-		 * therefore cannot safely call printk() or anything else
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
 		 */
-#ifdef DEBUG
-		printk(KERN_WARN "CPU%u: spurious wakeup call\n", cpu);
-#endif
+		(*spurious)++;
 	}
 }
 
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -104,30 +98,22 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-#ifdef DEBUG
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-#endif
-
-	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
+	int spurious = 0;
 
 	/*
 	 * we're ready for shutdown now, so do it
 	 */
 	cpu_enter_lowpower();
-	platform_do_lowpower(cpu);
+	platform_do_lowpower(cpu, &spurious);
 
 	/*
 	 * bring this CPU back into the world of cache
 	 * coherency, and then restore interrupts
 	 */
 	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
 }
 
 int platform_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index 8ea3bffb4e0..a0e7c12868b 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -21,8 +21,8 @@
 #include <mach/io.h>
 
 	.macro  addruart, rp, rv
-        ldreq   \rp, =IO_APB_PHYS       @ physical
-        ldrne   \rv, =IO_APB_VIRT        @ virtual
+        ldr     \rp, =IO_APB_PHYS       @ physical
+        ldr     \rv, =IO_APB_VIRT        @ virtual
 #if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
 #error "A debug UART must be selected in the kernel config to use DEBUG_LL"
 #elif defined(CONFIG_TEGRA_DEBUG_UARTA)
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
index 2ba9e5c9d2f..dd165c53889 100644
--- a/arch/arm/mach-tegra/include/mach/entry-macro.S
+++ b/arch/arm/mach-tegra/include/mach/entry-macro.S
@@ -16,8 +16,8 @@
 #include <mach/io.h>
 
 #if defined(CONFIG_ARM_GIC)
-
-#include <asm/hardware/gic.h>
+#define HAVE_GET_IRQNR_PREAMBLE
+#include <asm/hardware/entry-macro-gic.S>
 
 	/* Uses the GIC interrupt controller built into the cpu */
 #define ICTRL_BASE (IO_CPU_VIRT + 0x100)
@@ -32,68 +32,6 @@
 
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
-
-	/*
-	 * The interrupt numbering scheme is defined in the
-	 * interrupt controller spec.  To wit:
-	 *
-	 * Interrupts 0-15 are IPI
-	 * 16-28 are reserved
-	 * 29-31 are local.  We allow 30 to be used for the watchdog.
-	 * 32-1020 are global
-	 * 1021-1022 are reserved
-	 * 1023 is "spurious" (no interrupt)
-	 *
-	 * For now, we ignore all local interrupts so only return an interrupt
-	 * if it's between 30 and 1020.  The test_for_ipi routine below will
-	 * pick up on IPIs.
-	 *
-	 * A simple read from the controller will tell us the number of the
-	 * highest priority enabled interrupt.  We then just need to check
-	 * whether it is in the valid range for an IRQ (30-1020 inclusive).
-	 */
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-	/* bits 12-10 = src CPU, 9-0 = int # */
-	ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-
-	ldr		\tmp, =1021
-
-	bic     \irqnr, \irqstat, #0x1c00
-
-	cmp     \irqnr, #29
-	cmpcc	\irqnr, \irqnr
-	cmpne	\irqnr, \tmp
-	cmpcs	\irqnr, \irqnr
-
-	.endm
-
-	/* We assume that irqstat (the raw value of the IRQ acknowledge
-	 * register) is preserved from the macro above.
-	 * If there is an IPI, we immediately signal end of interrupt on the
-	 * controller, since this requires the original irqstat value which
-	 * we won't easily be able to recreate later.
-	 */
-
-	.macro test_for_ipi, irqnr, irqstat, base, tmp
-	bic	\irqnr, \irqstat, #0x1c00
-	cmp	\irqnr, #16
-	strcc	\irqstat, [\base, #GIC_CPU_EOI]
-	cmpcs	\irqnr, \irqnr
-	.endm
-
-	/* As above, this assumes that irqstat and base are preserved.. */
-
-	.macro test_for_ltirq, irqnr, irqstat, base, tmp
-	bic	\irqnr, \irqstat, #0x1c00
-	mov 	\tmp, #0
-	cmp	\irqnr, #29
-	moveq	\tmp, #1
-	streq	\irqstat, [\base, #GIC_CPU_EOI]
-	cmp	\tmp, #0
-	.endm
-
 #else
 	/* legacy interrupt controller for AP16 */
 	.macro	disable_fiq
diff --git a/arch/arm/mach-tegra/include/mach/io.h b/arch/arm/mach-tegra/include/mach/io.h
index f0981b1ac59..4cea2230c8d 100644
--- a/arch/arm/mach-tegra/include/mach/io.h
+++ b/arch/arm/mach-tegra/include/mach/io.h
@@ -65,8 +65,8 @@
 
 #ifndef __ASSEMBLER__
 
-#define __arch_ioremap(p, s, t)	tegra_ioremap(p, s, t)
-#define __arch_iounmap(v)	tegra_iounmap(v)
+#define __arch_ioremap		tegra_ioremap
+#define __arch_iounmap		tegra_iounmap
 
 void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
 void tegra_iounmap(volatile void __iomem *addr);
diff --git a/arch/arm/mach-tegra/include/mach/smp.h b/arch/arm/mach-tegra/include/mach/smp.h
index e4a34a35a54..c8221b38ee7 100644
--- a/arch/arm/mach-tegra/include/mach/smp.h
+++ b/arch/arm/mach-tegra/include/mach/smp.h
@@ -2,21 +2,13 @@
 #define ASMARM_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
-{
-	gic_raise_softirq(mask, 1);
-}
-
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(cpumask_t callmap)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
+	gic_raise_softirq(mask, ipi);
 }
 
 #endif
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 50a8dfb9a0c..5407de01abf 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -94,8 +94,8 @@ void __init tegra_init_irq(void)
 		writel(0, ictlr_to_virt(i) + ICTLR_CPU_IEP_CLASS);
 	}
 
-	gic_dist_init(0, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), 29);
-	gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
+	gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE),
+		 IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
 
 	gic = get_irq_chip(29);
 	gic_unmask_irq = gic->unmask;
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 1c0fd92cab3..ec1f68924ed 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -22,7 +22,6 @@
 #include <asm/cacheflush.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 
 #include <mach/iomap.h>
@@ -41,14 +40,12 @@ static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x100);
+	gic_secondary_init(0);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -117,24 +114,20 @@ void __init smp_init_cpus(void)
 {
 	unsigned int i, ncores = scu_get_core_count(scu_base);
 
+	if (ncores > NR_CPUS) {
+		printk(KERN_ERR "Tegra: no. of cores (%u) greater than configured (%u), clipping\n",
+			ncores, NR_CPUS);
+		ncores = NR_CPUS;
+	}
+
 	for (i = 0; i < ncores; i++)
 		cpu_set(i, cpu_possible_map);
 }
 
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int ncores = scu_get_core_count(scu_base);
-	unsigned int cpu = smp_processor_id();
 	int i;
 
-	smp_store_cpu_info(cpu);
-
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
@@ -142,15 +135,5 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
-	/*
-	 * Initialise the SCU if there are more than one CPU and let
-	 * them know where to start. Note that, on modern versions of
-	 * MILO, the "poke" doesn't actually do anything until each
-	 * individual core is sent a soft interrupt to get it out of
-	 * WFI
-	 */
-	if (max_cpus > 1) {
-		percpu_timer_setup();
-		scu_enable(scu_base);
-	}
+	scu_enable(scu_base);
 }
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index ae3b308e22a..f0dae6d8ba5 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -24,8 +24,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/hrtimer.h>
-
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #include <mach/iomap.h>
 
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 9057d6fd1d3..7b8ad1f98f4 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -25,10 +26,10 @@
 #include <linux/clocksource.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/cnt32_to_63.h>
 
 #include <asm/mach/time.h>
 #include <asm/localtimer.h>
+#include <asm/sched_clock.h>
 
 #include <mach/iomap.h>
 #include <mach/irqs.h>
@@ -91,7 +92,7 @@ static void tegra_timer_set_mode(enum clock_event_mode mode,
 
 static cycle_t tegra_clocksource_read(struct clocksource *cs)
 {
-	return cnt32_to_63(timer_readl(TIMERUS_CNTR_1US));
+	return timer_readl(TIMERUS_CNTR_1US);
 }
 
 static struct clock_event_device tegra_clockevent = {
@@ -106,14 +107,29 @@ static struct clocksource tegra_clocksource = {
 	.name	= "timer_us",
 	.rating	= 300,
 	.read	= tegra_clocksource_read,
-	.mask	= 0x7FFFFFFFFFFFFFFFULL,
+	.mask	= CLOCKSOURCE_MASK(32),
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-unsigned long long sched_clock(void)
+static DEFINE_CLOCK_DATA(cd);
+
+/*
+ * Constants generated by clocks_calc_mult_shift(m, s, 1MHz, NSEC_PER_SEC, 60).
+ * This gives a resolution of about 1us and a wrap period of about 1h11min.
+ */
+#define SC_MULT		4194304000u
+#define SC_SHIFT	22
+
+unsigned long long notrace sched_clock(void)
 {
-	return clocksource_cyc2ns(tegra_clocksource.read(&tegra_clocksource),
-		tegra_clocksource.mult, tegra_clocksource.shift);
+	u32 cyc = timer_readl(TIMERUS_CNTR_1US);
+	return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
+}
+
+static void notrace tegra_update_sched_clock(void)
+{
+	u32 cyc = timer_readl(TIMERUS_CNTR_1US);
+	update_sched_clock(&cd, cyc, (u32)~0);
 }
 
 static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id)
@@ -158,6 +174,9 @@ static void __init tegra_init_timer(void)
 		WARN(1, "Unknown clock rate");
 	}
 
+	init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32,
+			       1000000, SC_MULT, SC_SHIFT);
+
 	if (clocksource_register_hz(&tegra_clocksource, 1000000)) {
 		printk(KERN_ERR "Failed to register clocksource\n");
 		BUG();
diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
index 7458fc6df5c..fabcc49abe8 100644
--- a/arch/arm/mach-u300/clock.c
+++ b/arch/arm/mach-u300/clock.c
@@ -25,8 +25,8 @@
 #include <linux/timer.h>
 #include <linux/io.h>
 #include <linux/seq_file.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
 #include <mach/hardware.h>
 #include <mach/syscon.h>
 
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 3fc4472719b..3ec58bd2d6e 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -9,6 +9,7 @@
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/clockchips.h>
@@ -21,6 +22,7 @@
 #include <mach/hardware.h>
 
 /* Generic stuff */
+#include <asm/sched_clock.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
@@ -352,12 +354,18 @@ static struct clocksource clocksource_u300_1mhz = {
  * this wraps around for now, since it is just a relative time
  * stamp. (Inspired by OMAP implementation.)
  */
+static DEFINE_CLOCK_DATA(cd);
+
 unsigned long long notrace sched_clock(void)
 {
-	return clocksource_cyc2ns(clocksource_u300_1mhz.read(
-				  &clocksource_u300_1mhz),
-				  clocksource_u300_1mhz.mult,
-				  clocksource_u300_1mhz.shift);
+	u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace u300_update_sched_clock(void)
+{
+	u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC);
+	update_sched_clock(&cd, cyc, (u32)~0);
 }
 
 
@@ -375,6 +383,8 @@ static void __init u300_timer_init(void)
 	clk_enable(clk);
 	rate = clk_get_rate(clk);
 
+	init_sched_clock(&cd, u300_update_sched_clock, 32, rate);
+
 	/*
 	 * Disable the "OS" and "DD" timers - these are designed for Symbian!
 	 * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
@@ -412,9 +422,7 @@ static void __init u300_timer_init(void)
 	writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
 		U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2);
 
-	clocksource_calc_mult_shift(&clocksource_u300_1mhz,
-				    rate, APPTIMER_MIN_RANGE);
-	if (clocksource_register(&clocksource_u300_1mhz))
+	if (clocksource_register_hz(&clocksource_u300_1mhz, rate))
 		printk(KERN_ERR "timer: failed to initialize clock "
 		       "source %s\n", clocksource_u300_1mhz.name);
 
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index 9e27a84433c..12052e8e064 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,14 +2,16 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= clock.o cpu.o devices.o
-obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o devices-db5500.o
+obj-y				:= clock.o cpu.o devices.o devices-common.o
+obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu.o
-obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o
-obj-$(CONFIG_MACH_U5500)	+= board-u5500.o
+obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o board-mop500-sdi.o \
+				board-mop500-keypads.o
+obj-$(CONFIG_MACH_U5500)	+= board-u5500.o board-u5500-sdi.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= board-mop500-regulators.o
-obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem_irq.o
-obj-$(CONFIG_U5500_MBOX)	+= mbox.o
+obj-$(CONFIG_U5500_MODEM_IRQ)	+= modem-irq-db5500.o
+obj-$(CONFIG_U5500_MBOX)	+= mbox-db5500.o
+obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
diff --git a/arch/arm/mach-ux500/board-mop500-keypads.c b/arch/arm/mach-ux500/board-mop500-keypads.c
new file mode 100644
index 00000000000..70318c354d3
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500-keypads.c
@@ -0,0 +1,229 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Keypad layouts for various boards
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/mfd/tc3589x.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <plat/pincfg.h>
+#include <plat/ske.h>
+
+#include <mach/devices.h>
+#include <mach/hardware.h>
+
+#include "devices-db8500.h"
+#include "board-mop500.h"
+
+/* STMPE/SKE keypad use this key layout */
+static const unsigned int mop500_keymap[] = {
+	KEY(2, 5, KEY_END),
+	KEY(4, 1, KEY_POWER),
+	KEY(3, 5, KEY_VOLUMEDOWN),
+	KEY(1, 3, KEY_3),
+	KEY(5, 2, KEY_RIGHT),
+	KEY(5, 0, KEY_9),
+
+	KEY(0, 5, KEY_MENU),
+	KEY(7, 6, KEY_ENTER),
+	KEY(4, 5, KEY_0),
+	KEY(6, 7, KEY_2),
+	KEY(3, 4, KEY_UP),
+	KEY(3, 3, KEY_DOWN),
+
+	KEY(6, 4, KEY_SEND),
+	KEY(6, 2, KEY_BACK),
+	KEY(4, 2, KEY_VOLUMEUP),
+	KEY(5, 5, KEY_1),
+	KEY(4, 3, KEY_LEFT),
+	KEY(3, 2, KEY_7),
+};
+
+static const struct matrix_keymap_data mop500_keymap_data = {
+	.keymap		= mop500_keymap,
+	.keymap_size    = ARRAY_SIZE(mop500_keymap),
+};
+
+/*
+ * Nomadik SKE keypad
+ */
+#define ROW_PIN_I0      164
+#define ROW_PIN_I1      163
+#define ROW_PIN_I2      162
+#define ROW_PIN_I3      161
+#define ROW_PIN_I4      156
+#define ROW_PIN_I5      155
+#define ROW_PIN_I6      154
+#define ROW_PIN_I7      153
+#define COL_PIN_O0      168
+#define COL_PIN_O1      167
+#define COL_PIN_O2      166
+#define COL_PIN_O3      165
+#define COL_PIN_O4      160
+#define COL_PIN_O5      159
+#define COL_PIN_O6      158
+#define COL_PIN_O7      157
+
+#define SKE_KPD_MAX_ROWS	8
+#define SKE_KPD_MAX_COLS	8
+
+static int ske_kp_rows[] = {
+	ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
+	ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
+};
+
+/*
+ * ske_set_gpio_row: request and set gpio rows
+ */
+static int ske_set_gpio_row(int gpio)
+{
+	int ret;
+
+	ret = gpio_request(gpio, "ske-kp");
+	if (ret < 0) {
+		pr_err("ske_set_gpio_row: gpio request failed\n");
+		return ret;
+	}
+
+	ret = gpio_direction_output(gpio, 1);
+	if (ret < 0) {
+		pr_err("ske_set_gpio_row: gpio direction failed\n");
+		gpio_free(gpio);
+	}
+
+	return ret;
+}
+
+/*
+ * ske_kp_init - enable the gpio configuration
+ */
+static int ske_kp_init(void)
+{
+	int ret, i;
+
+	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
+		ret = ske_set_gpio_row(ske_kp_rows[i]);
+		if (ret < 0) {
+			pr_err("ske_kp_init: failed init\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct ske_keypad_platform_data ske_keypad_board = {
+	.init		= ske_kp_init,
+	.keymap_data    = &mop500_keymap_data,
+	.no_autorepeat  = true,
+	.krow		= SKE_KPD_MAX_ROWS,     /* 8x8 matrix */
+	.kcol		= SKE_KPD_MAX_COLS,
+	.debounce_ms    = 40,			/* in millisecs */
+};
+
+/*
+ * STMPE1601
+ */
+static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
+	.debounce_ms    = 64,
+	.scan_count     = 8,
+	.no_autorepeat  = true,
+	.keymap_data    = &mop500_keymap_data,
+};
+
+static struct stmpe_platform_data stmpe1601_data = {
+	.id             = 1,
+	.blocks         = STMPE_BLOCK_KEYPAD,
+	.irq_trigger    = IRQF_TRIGGER_FALLING,
+	.irq_base       = MOP500_STMPE1601_IRQ(0),
+	.keypad         = &stmpe1601_keypad_data,
+	.autosleep      = true,
+	.autosleep_timeout = 1024,
+};
+
+static struct i2c_board_info mop500_i2c0_devices_stuib[] = {
+	{
+		I2C_BOARD_INFO("stmpe1601", 0x40),
+		.irq = NOMADIK_GPIO_TO_IRQ(218),
+		.platform_data = &stmpe1601_data,
+		.flags = I2C_CLIENT_WAKE,
+	},
+};
+
+/*
+ * TC35893
+ */
+
+static const unsigned int uib_keymap[] = {
+	KEY(3, 1, KEY_END),
+	KEY(4, 1, KEY_POWER),
+	KEY(6, 4, KEY_VOLUMEDOWN),
+	KEY(4, 2, KEY_EMAIL),
+	KEY(3, 3, KEY_RIGHT),
+	KEY(2, 5, KEY_BACKSPACE),
+
+	KEY(6, 7, KEY_MENU),
+	KEY(5, 0, KEY_ENTER),
+	KEY(4, 3, KEY_0),
+	KEY(3, 4, KEY_DOT),
+	KEY(5, 2, KEY_UP),
+	KEY(3, 5, KEY_DOWN),
+
+	KEY(4, 5, KEY_SEND),
+	KEY(0, 5, KEY_BACK),
+	KEY(6, 2, KEY_VOLUMEUP),
+	KEY(1, 3, KEY_SPACE),
+	KEY(7, 6, KEY_LEFT),
+	KEY(5, 5, KEY_SEARCH),
+};
+
+static struct matrix_keymap_data uib_keymap_data = {
+	.keymap         = uib_keymap,
+	.keymap_size    = ARRAY_SIZE(uib_keymap),
+};
+
+static struct tc3589x_keypad_platform_data tc35893_data = {
+	.krow = TC_KPD_ROWS,
+	.kcol = TC_KPD_COLUMNS,
+	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
+	.settle_time = TC_KPD_SETTLE_TIME,
+	.irqtype = IRQF_TRIGGER_FALLING,
+	.enable_wakeup = true,
+	.keymap_data    = &uib_keymap_data,
+	.no_autorepeat  = true,
+};
+
+static struct tc3589x_platform_data tc3589x_keypad_data = {
+	.block = TC3589x_BLOCK_KEYPAD,
+	.keypad = &tc35893_data,
+	.irq_base = MOP500_EGPIO_IRQ_BASE,
+};
+
+static struct i2c_board_info mop500_i2c0_devices_uib[] = {
+	{
+		I2C_BOARD_INFO("tc3589x", 0x44),
+		.platform_data = &tc3589x_keypad_data,
+		.irq = NOMADIK_GPIO_TO_IRQ(218),
+		.flags = I2C_CLIENT_WAKE,
+	},
+};
+
+void mop500_keypad_init(void)
+{
+	db8500_add_ske_keypad(&ske_keypad_board);
+
+	i2c_register_board_info(0, mop500_i2c0_devices_stuib,
+			ARRAY_SIZE(mop500_i2c0_devices_stuib));
+
+	i2c_register_board_info(0, mop500_i2c0_devices_uib,
+			ARRAY_SIZE(mop500_i2c0_devices_uib));
+
+}
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index bac995665b5..4b996676594 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -16,10 +16,24 @@
 #include <mach/devices.h>
 #include <mach/hardware.h>
 
+#include "devices-db8500.h"
 #include "pins-db8500.h"
 #include "board-mop500.h"
 
 static pin_cfg_t mop500_sdi_pins[] = {
+	/* SDI0 (MicroSD slot) */
+	GPIO18_MC0_CMDDIR,
+	GPIO19_MC0_DAT0DIR,
+	GPIO20_MC0_DAT2DIR,
+	GPIO21_MC0_DAT31DIR,
+	GPIO22_MC0_FBCLK,
+	GPIO23_MC0_CLK,
+	GPIO24_MC0_CMD,
+	GPIO25_MC0_DAT0,
+	GPIO26_MC0_DAT1,
+	GPIO27_MC0_DAT2,
+	GPIO28_MC0_DAT3,
+
 	/* SDI4 (on-board eMMC) */
 	GPIO197_MC4_DAT3,
 	GPIO198_MC4_DAT2,
@@ -50,6 +64,55 @@ static pin_cfg_t mop500_sdi2_pins[] = {
 };
 
 /*
+ * SDI 0 (MicroSD slot)
+ */
+
+/* MMCIPOWER bits */
+#define MCI_DATA2DIREN		(1 << 2)
+#define MCI_CMDDIREN		(1 << 3)
+#define MCI_DATA0DIREN		(1 << 4)
+#define MCI_DATA31DIREN		(1 << 5)
+#define MCI_FBCLKEN		(1 << 7)
+
+static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
+				   unsigned char power_mode)
+{
+	if (power_mode == MMC_POWER_UP)
+		gpio_set_value_cansleep(GPIO_SDMMC_EN, 1);
+	else if (power_mode == MMC_POWER_OFF)
+		gpio_set_value_cansleep(GPIO_SDMMC_EN, 0);
+
+	return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN |
+	       MCI_DATA2DIREN | MCI_DATA31DIREN;
+}
+
+static struct mmci_platform_data mop500_sdi0_data = {
+	.vdd_handler	= mop500_sdi0_vdd_handler,
+	.ocr_mask	= MMC_VDD_29_30,
+	.f_max		= 100000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA,
+	.gpio_cd	= GPIO_SDMMC_CD,
+	.gpio_wp	= -1,
+};
+
+void mop500_sdi_tc35892_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_SDMMC_EN, "SDMMC_EN");
+	if (!ret)
+		ret = gpio_request(GPIO_SDMMC_1V8_3V_SEL,
+				   "GPIO_SDMMC_1V8_3V_SEL");
+	if (ret)
+		return;
+
+	gpio_direction_output(GPIO_SDMMC_1V8_3V_SEL, 1);
+	gpio_direction_output(GPIO_SDMMC_EN, 0);
+
+	db8500_add_sdi0(&mop500_sdi0_data);
+}
+
+/*
  * SDI 2 (POP eMMC, not on DB8500ed)
  */
 
@@ -74,18 +137,24 @@ static struct mmci_platform_data mop500_sdi4_data = {
 	.gpio_wp	= -1,
 };
 
-void mop500_sdi_init(void)
+void __init mop500_sdi_init(void)
 {
 	nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins));
 
-	u8500_sdi2_device.dev.platform_data = &mop500_sdi2_data;
-	u8500_sdi4_device.dev.platform_data = &mop500_sdi4_data;
+	/*
+	 * sdi0 will finally be added when the TC35892 initializes and calls
+	 * mop500_sdi_tc35892_init() above.
+	 */
 
+	/* PoP:ed eMMC */
 	if (!cpu_is_u8500ed()) {
 		nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins));
-		amba_device_register(&u8500_sdi2_device, &iomem_resource);
+		/* POP eMMC on v1.0 has problems with high speed */
+		if (!cpu_is_u8500v10())
+			mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
+		db8500_add_sdi2(&mop500_sdi2_data);
 	}
 
 	/* On-board eMMC */
-	amba_device_register(&u8500_sdi4_device, &iomem_resource);
+	db8500_add_sdi4(&mop500_sdi4_data);
 }
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index cac83a69488..a1c9ea1a66d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -13,25 +13,26 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
 #include <linux/spi/spi.h>
 #include <linux/mfd/ab8500.h>
-#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/tc3589x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <plat/pincfg.h>
 #include <plat/i2c.h>
-#include <plat/ske.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
 
+#include "devices-db8500.h"
 #include "pins-db8500.h"
 #include "board-mop500.h"
 
@@ -69,22 +70,12 @@ static pin_cfg_t mop500_pins[] = {
 	GPIO166_KP_O2,
 	GPIO167_KP_O1,
 	GPIO168_KP_O0,
-};
 
-static void ab4500_spi_cs_control(u32 command)
-{
-	/* set the FRM signal, which is CS  - TODO */
-}
+	/* GPIO_EXP_INT */
+	GPIO217_GPIO,
 
-struct pl022_config_chip ab4500_chip_info = {
-	.com_mode = INTERRUPT_TRANSFER,
-	.iface = SSP_INTERFACE_MOTOROLA_SPI,
-	/* we can act as master only */
-	.hierarchy = SSP_MASTER,
-	.slave_tx_disable = 0,
-	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
-	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
-	.cs_control = ab4500_spi_cs_control,
+	/* STMPE1601 IRQ */
+	GPIO218_GPIO    | PIN_INPUT_PULLUP,
 };
 
 static struct ab8500_platform_data ab8500_platdata = {
@@ -93,9 +84,9 @@ static struct ab8500_platform_data ab8500_platdata = {
 
 static struct resource ab8500_resources[] = {
 	[0] = {
-		.start = IRQ_AB8500,
-		.end = IRQ_AB8500,
-		.flags = IORESOURCE_IRQ
+		.start	= IRQ_DB8500_AB8500,
+		.end	= IRQ_DB8500_AB8500,
+		.flags	= IORESOURCE_IRQ
 	}
 };
 
@@ -109,19 +100,6 @@ struct platform_device ab8500_device = {
 	.resource = ab8500_resources,
 };
 
-static struct spi_board_info ab8500_spi_devices[] = {
-	{
-		.modalias = "ab8500-spi",
-		.controller_data = &ab4500_chip_info,
-		.platform_data = &ab8500_platdata,
-		.max_speed_hz = 12000000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.mode = SPI_MODE_3,
-		.irq = IRQ_DB8500_AB8500,
-	},
-};
-
 static struct pl022_ssp_controller ssp0_platform_data = {
 	.bus_id = 0,
 	/* pl022 not yet supports dma */
@@ -132,6 +110,34 @@ static struct pl022_ssp_controller ssp0_platform_data = {
 	.num_chipselect = 5,
 };
 
+/*
+ * TC35892
+ */
+
+static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
+{
+	mop500_sdi_tc35892_init();
+}
+
+static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
+	.gpio_base	= MOP500_EGPIO(0),
+	.setup		= mop500_tc35892_init,
+};
+
+static struct tc3589x_platform_data mop500_tc35892_data = {
+	.block		= TC3589x_BLOCK_GPIO,
+	.gpio		= &mop500_tc35892_gpio_data,
+	.irq_base	= MOP500_EGPIO_IRQ_BASE,
+};
+
+static struct i2c_board_info mop500_i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("tc3589x", 0x42),
+		.irq            = NOMADIK_GPIO_TO_IRQ(217),
+		.platform_data  = &mop500_tc35892_data,
+	},
+};
+
 #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
 static struct nmk_i2c_controller u8500_i2c##id##_data = { \
 	/*				\
@@ -161,159 +167,49 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
 U8500_I2C_CONTROLLER(2,	0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
 U8500_I2C_CONTROLLER(3,	0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
 
-static struct amba_device *amba_devs[] __initdata = {
-	&ux500_uart0_device,
-	&ux500_uart1_device,
-	&ux500_uart2_device,
-	&u8500_ssp0_device,
-};
-
-static const unsigned int ux500_keymap[] = {
-	KEY(2, 5, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(3, 5, KEY_VOLUMEDOWN),
-	KEY(1, 3, KEY_3),
-	KEY(5, 2, KEY_RIGHT),
-	KEY(5, 0, KEY_9),
-
-	KEY(0, 5, KEY_MENU),
-	KEY(7, 6, KEY_ENTER),
-	KEY(4, 5, KEY_0),
-	KEY(6, 7, KEY_2),
-	KEY(3, 4, KEY_UP),
-	KEY(3, 3, KEY_DOWN),
-
-	KEY(6, 4, KEY_SEND),
-	KEY(6, 2, KEY_BACK),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_1),
-	KEY(4, 3, KEY_LEFT),
-	KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data ux500_keymap_data = {
-	.keymap         = ux500_keymap,
-	.keymap_size    = ARRAY_SIZE(ux500_keymap),
-};
+static void __init mop500_i2c_init(void)
+{
+	db8500_add_i2c0(&u8500_i2c0_data);
+	db8500_add_i2c1(&u8500_i2c1_data);
+	db8500_add_i2c2(&u8500_i2c2_data);
+	db8500_add_i2c3(&u8500_i2c3_data);
+}
 
-/*
- * Nomadik SKE keypad
- */
-#define ROW_PIN_I0      164
-#define ROW_PIN_I1      163
-#define ROW_PIN_I2      162
-#define ROW_PIN_I3      161
-#define ROW_PIN_I4      156
-#define ROW_PIN_I5      155
-#define ROW_PIN_I6      154
-#define ROW_PIN_I7      153
-#define COL_PIN_O0      168
-#define COL_PIN_O1      167
-#define COL_PIN_O2      166
-#define COL_PIN_O3      165
-#define COL_PIN_O4      160
-#define COL_PIN_O5      159
-#define COL_PIN_O6      158
-#define COL_PIN_O7      157
-
-#define SKE_KPD_MAX_ROWS        8
-#define SKE_KPD_MAX_COLS        8
-
-static int ske_kp_rows[] = {
-	ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
-	ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
 };
 
-/*
- * ske_set_gpio_row: request and set gpio rows
- */
-static int ske_set_gpio_row(int gpio)
+static void __init mop500_spi_init(void)
 {
-	int ret;
-
-	ret = gpio_request(gpio, "ske-kp");
-	if (ret < 0) {
-		pr_err("ske_set_gpio_row: gpio request failed\n");
-		return ret;
-	}
-
-	ret = gpio_direction_output(gpio, 1);
-	if (ret < 0) {
-		pr_err("ske_set_gpio_row: gpio direction failed\n");
-		gpio_free(gpio);
-	}
-
-	return ret;
+	db8500_add_ssp0(&ssp0_platform_data);
 }
 
-/*
- * ske_kp_init - enable the gpio configuration
- */
-static int ske_kp_init(void)
+static void __init mop500_uart_init(void)
 {
-	int ret, i;
-
-	for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
-		ret = ske_set_gpio_row(ske_kp_rows[i]);
-		if (ret < 0) {
-			pr_err("ske_kp_init: failed init\n");
-			return ret;
-		}
-	}
-
-	return 0;
+	db8500_add_uart0();
+	db8500_add_uart1();
+	db8500_add_uart2();
 }
 
-static struct ske_keypad_platform_data ske_keypad_board = {
-	.init           = ske_kp_init,
-	.keymap_data    = &ux500_keymap_data,
-	.no_autorepeat  = true,
-	.krow           = SKE_KPD_MAX_ROWS,     /* 8x8 matrix */
-	.kcol           = SKE_KPD_MAX_COLS,
-	.debounce_ms    = 40,                   /* in millsecs */
-};
-
-
-
-/* add any platform devices here - TODO */
-static struct platform_device *platform_devs[] __initdata = {
-	&u8500_i2c0_device,
-	&ux500_i2c1_device,
-	&ux500_i2c2_device,
-	&ux500_i2c3_device,
-	&ux500_ske_keypad_device,
-};
-
 static void __init u8500_init_machine(void)
 {
-	int i;
-
 	u8500_init_devices();
 
 	nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins));
 
-	u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data;
-	ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data;
-	ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data;
-	ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data;
-	ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board;
-
-	u8500_ssp0_device.dev.platform_data = &ssp0_platform_data;
-
-	/* Register the active AMBA devices on this board */
-	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-		amba_device_register(amba_devs[i], &iomem_resource);
-
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
+	mop500_i2c_init();
 	mop500_sdi_init();
+	mop500_spi_init();
+	mop500_uart_init();
+
+	mop500_keypad_init();
+
+	platform_device_register(&ab8500_device);
 
-	/* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */
-	if (cpu_is_u8500ed() || cpu_is_u8500v10())
-		spi_register_board_info(ab8500_spi_devices,
-			ARRAY_SIZE(ab8500_spi_devices));
-	else /* If HW is v.1.1 or later use I2C to access AB8500 */
-		platform_device_register(&ab8500_device);
+	i2c_register_board_info(0, mop500_i2c0_devices,
+				ARRAY_SIZE(mop500_i2c0_devices));
 }
 
 MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 2d240322fa6..3104ae2a02c 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,6 +7,15 @@
 #ifndef __BOARD_MOP500_H
 #define __BOARD_MOP500_H
 
+#define MOP500_EGPIO(x)			(NOMADIK_NR_GPIO + (x))
+
+/* GPIOs on the TC35892 expander */
+#define GPIO_SDMMC_CD			MOP500_EGPIO(3)
+#define GPIO_SDMMC_EN			MOP500_EGPIO(17)
+#define GPIO_SDMMC_1V8_3V_SEL		MOP500_EGPIO(18)
+
 extern void mop500_sdi_init(void);
+extern void mop500_sdi_tc35892_init(void);
+extern void mop500_keypad_init(void);
 
 #endif
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
new file mode 100644
index 00000000000..54712acc039
--- /dev/null
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Hanumath Prasad <ulf.hansson@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/amba/mmci.h>
+#include <linux/mmc/host.h>
+#include <linux/gpio.h>
+
+#include <plat/pincfg.h>
+#include <mach/db5500-regs.h>
+#include <plat/ste_dma40.h>
+
+#include "pins-db5500.h"
+#include "devices-db5500.h"
+#include "ste-dma40-db5500.h"
+
+static pin_cfg_t u5500_sdi_pins[] = {
+	/* SDI0 (POP eMMC) */
+	GPIO5_MC0_DAT0		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO6_MC0_DAT1		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO7_MC0_DAT2		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO8_MC0_DAT3		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO9_MC0_DAT4		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO10_MC0_DAT5		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO11_MC0_DAT6		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO12_MC0_DAT7		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO13_MC0_CMD		| PIN_DIR_INPUT | PIN_PULL_UP,
+	GPIO14_MC0_CLK		| PIN_DIR_OUTPUT | PIN_VAL_LOW,
+};
+
+static struct mmci_platform_data u5500_sdi0_data = {
+	.ocr_mask	= MMC_VDD_165_195,
+	.f_max		= 50000000,
+	.capabilities	= MMC_CAP_4_BIT_DATA |
+				MMC_CAP_8_BIT_DATA |
+				MMC_CAP_MMC_HIGHSPEED,
+	.gpio_cd	= -1,
+	.gpio_wp	= -1,
+};
+
+void __init u5500_sdi_init(void)
+{
+	nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
+
+	db5500_add_sdi0(&u5500_sdi0_data);
+}
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 1ca094a45e7..39d370c1f3b 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -9,6 +9,7 @@
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
 #include <linux/gpio.h>
+#include <linux/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -17,20 +18,24 @@
 #include <mach/devices.h>
 #include <mach/setup.h>
 
-static struct amba_device *amba_board_devs[] __initdata = {
-	&ux500_uart0_device,
-	&ux500_uart1_device,
-	&ux500_uart2_device,
-};
+#include "devices-db5500.h"
+
+static void __init u5500_uart_init(void)
+{
+	db5500_add_uart0();
+	db5500_add_uart1();
+	db5500_add_uart2();
+}
 
 static void __init u5500_init_machine(void)
 {
 	u5500_init_devices();
 
-	amba_add_devices(amba_board_devs, ARRAY_SIZE(amba_board_devs));
+	u5500_sdi_init();
+	u5500_uart_init();
 }
 
-MACHINE_START(U8500, "ST-Ericsson U5500 Platform")
+MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
 	.boot_params	= 0x00000100,
 	.map_io		= u5500_map_io,
 	.init_irq	= ux500_init_irq,
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
index 1675047daf2..ccff2dae167 100644
--- a/arch/arm/mach-ux500/clock.c
+++ b/arch/arm/mach-ux500/clock.c
@@ -13,13 +13,18 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 #include <plat/mtu.h>
 #include <mach/hardware.h>
 #include "clock.h"
 
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>	/* for copy_from_user */
+static LIST_HEAD(clk_list);
+#endif
+
 #define PRCC_PCKEN		0x00
 #define PRCC_PCKDIS		0x04
 #define PRCC_KCKEN		0x08
@@ -133,7 +138,7 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
 {
 	void __iomem *addr = __io_address(UX500_PRCMU_BASE)
 		+ PRCM_TCR;
-	u32 tcr = readl(addr);
+	u32 tcr;
 	int mtu = (int) clk->data;
 	/*
 	 * One of these is selected eventually
@@ -144,6 +149,14 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
 	unsigned long mturate;
 	unsigned long retclk;
 
+	/*
+	 * On a startup, always conifgure the TCR to the doze mode;
+	 * bootloaders do it for us. Do this in the kernel too.
+	 */
+	writel(PRCM_TCR_DOZE_MODE, addr);
+
+	tcr = readl(addr);
+
 	/* Get the rate from the parent as a default */
 	if (clk->parent_periph)
 		mturate = clk_get_rate(clk->parent_periph);
@@ -153,45 +166,6 @@ static unsigned long clk_mtu_get_rate(struct clk *clk)
 		/* We need to be connected SOMEWHERE */
 		BUG();
 
-	/*
-	 * Are we in doze mode?
-	 * In this mode the parent peripheral or the fixed 32768 Hz
-	 * clock is fed into the block.
-	 */
-	if (!(tcr & PRCM_TCR_DOZE_MODE)) {
-		/*
-		 * Here we're using the clock input from the APE ULP
-		 * clock domain. But first: are the timers stopped?
-		 */
-		if (tcr & PRCM_TCR_STOPPED) {
-			clk32k = 0;
-			mturate = 0;
-		} else {
-			/* Else default mode: 0 and 2.4 MHz */
-			clk32k = 0;
-			if (cpu_is_u5500())
-				/* DB5500 divides by 8 */
-				mturate /= 8;
-			else if (cpu_is_u8500ed()) {
-				/*
-				 * This clocking setting must not be used
-				 * in the ED chip, it is simply not
-				 * connected anywhere!
-				 */
-				mturate = 0;
-				BUG();
-			} else
-				/*
-				 * In this mode the ulp38m4 clock is divided
-				 * by a factor 16, on the DB8500 typically
-				 * 38400000 / 16 ~ 2.4 MHz.
-				 * TODO: Replace the constant with a reference
-				 * to the ULP source once this is modeled.
-				 */
-				mturate = 38400000 / 16;
-		}
-	}
-
 	/* Return the clock selected for this MTU */
 	if (tcr & (1 << mtu))
 		retclk = clk32k;
@@ -317,6 +291,7 @@ static struct clkops clk_prcc_ops = {
 };
 
 static struct clk clk_32khz = {
+	.name =  "clk_32khz",
 	.rate = 32000,
 };
 
@@ -366,94 +341,96 @@ static DEFINE_PRCMU_CLK(uiccclk,	0x4, 1, UICCCLK); /* v1 */
  */
 
 /* Peripheral Cluster #1 */
-static DEFINE_PRCC_CLK(1, i2c4, 	10, 9, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, i2c4,		10, 9, &clk_i2cclk);
 static DEFINE_PRCC_CLK(1, gpio0,	9, -1, NULL);
-static DEFINE_PRCC_CLK(1, slimbus0, 	8,  8, &clk_slimclk);
-static DEFINE_PRCC_CLK(1, spi3_ed, 	7,  7, NULL);
-static DEFINE_PRCC_CLK(1, spi3_v1, 	7, -1, NULL);
-static DEFINE_PRCC_CLK(1, i2c2, 	6,  6, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, slimbus0,	8,  8, &clk_slimclk);
+static DEFINE_PRCC_CLK(1, spi3_ed,	7,  7, NULL);
+static DEFINE_PRCC_CLK(1, spi3_v1,	7, -1, NULL);
+static DEFINE_PRCC_CLK(1, i2c2,		6,  6, &clk_i2cclk);
 static DEFINE_PRCC_CLK(1, sdi0,		5,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(1, msp1_ed, 	4,  4, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, msp1_v1, 	4,  4, &clk_msp1clk);
-static DEFINE_PRCC_CLK(1, msp0, 	3,  3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(1, i2c1, 	2,  2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(1, uart1, 	1,  1, &clk_uartclk);
-static DEFINE_PRCC_CLK(1, uart0, 	0,  0, &clk_uartclk);
+static DEFINE_PRCC_CLK(1, msp1_ed,	4,  4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, msp1_v1,	4,  4, &clk_msp1clk);
+static DEFINE_PRCC_CLK(1, msp0,		3,  3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(1, i2c1,		2,  2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(1, uart1,	1,  1, &clk_uartclk);
+static DEFINE_PRCC_CLK(1, uart0,	0,  0, &clk_uartclk);
 
 /* Peripheral Cluster #2 */
 
 static DEFINE_PRCC_CLK(2, gpio1_ed,	12, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx_ed, 	11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssirx_ed, 	10, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi0_ed, 	 9, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3_ed, 	 8,  6, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1_ed, 	 7,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2_ed, 	 6,  4, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4_ed, 	 4,  2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, ssitx_ed,	11, -1, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_ed,	10, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi0_ed,	 9, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_ed,	 8,  6, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_ed,	 7,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_ed,	 6,  4, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_ed,	 4,  2, &clk_sdmmcclk);
 static DEFINE_PRCC_CLK(2, pwl_ed,	 3,  1, NULL);
-static DEFINE_PRCC_CLK(2, spi1_ed, 	 2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2_ed, 	 1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3_ed, 	 0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(2, spi1_ed,	 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_ed,	 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_ed,	 0,  0, &clk_i2cclk);
 
 static DEFINE_PRCC_CLK(2, gpio1_v1,	11, -1, NULL);
-static DEFINE_PRCC_CLK(2, ssitx_v1, 	10,  7, NULL);
-static DEFINE_PRCC_CLK(2, ssirx_v1, 	 9,  6, NULL);
-static DEFINE_PRCC_CLK(2, spi0_v1, 	 8, -1, NULL);
-static DEFINE_PRCC_CLK(2, sdi3_v1, 	 7,  5, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, sdi1_v1, 	 6,  4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(2, msp2_v1, 	 5,  3, &clk_msp02clk);
-static DEFINE_PRCC_CLK(2, sdi4_v1, 	 4,  2, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, ssitx_v1,	10,  7, NULL);
+static DEFINE_PRCC_CLK(2, ssirx_v1,	 9,  6, NULL);
+static DEFINE_PRCC_CLK(2, spi0_v1,	 8, -1, NULL);
+static DEFINE_PRCC_CLK(2, sdi3_v1,	 7,  5, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, sdi1_v1,	 6,  4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(2, msp2_v1,	 5,  3, &clk_msp02clk);
+static DEFINE_PRCC_CLK(2, sdi4_v1,	 4,  2, &clk_sdmmcclk);
 static DEFINE_PRCC_CLK(2, pwl_v1,	 3,  1, NULL);
-static DEFINE_PRCC_CLK(2, spi1_v1, 	 2, -1, NULL);
-static DEFINE_PRCC_CLK(2, spi2_v1, 	 1, -1, NULL);
-static DEFINE_PRCC_CLK(2, i2c3_v1, 	 0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(2, spi1_v1,	 2, -1, NULL);
+static DEFINE_PRCC_CLK(2, spi2_v1,	 1, -1, NULL);
+static DEFINE_PRCC_CLK(2, i2c3_v1,	 0,  0, &clk_i2cclk);
 
 /* Peripheral Cluster #3 */
-static DEFINE_PRCC_CLK(3, gpio2, 	8, -1, NULL);
-static DEFINE_PRCC_CLK(3, sdi5, 	7,  7, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, uart2, 	6,  6, &clk_uartclk);
-static DEFINE_PRCC_CLK(3, ske, 		5,  5, &clk_32khz);
-static DEFINE_PRCC_CLK(3, sdi2, 	4,  4, &clk_sdmmcclk);
-static DEFINE_PRCC_CLK(3, i2c0, 	3,  3, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1_ed, 	2,  2, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp0_ed, 	1,  1, &clk_i2cclk);
-static DEFINE_PRCC_CLK(3, ssp1_v1, 	2,  2, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, ssp0_v1, 	1,  1, &clk_sspclk);
-static DEFINE_PRCC_CLK(3, fsmc, 	0, -1, NULL);
+static DEFINE_PRCC_CLK(3, gpio2,	8, -1, NULL);
+static DEFINE_PRCC_CLK(3, sdi5,		7,  7, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, uart2,	6,  6, &clk_uartclk);
+static DEFINE_PRCC_CLK(3, ske,		5,  5, &clk_32khz);
+static DEFINE_PRCC_CLK(3, sdi2,		4,  4, &clk_sdmmcclk);
+static DEFINE_PRCC_CLK(3, i2c0,		3,  3, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_ed,	2,  2, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp0_ed,	1,  1, &clk_i2cclk);
+static DEFINE_PRCC_CLK(3, ssp1_v1,	2,  2, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, ssp0_v1,	1,  1, &clk_sspclk);
+static DEFINE_PRCC_CLK(3, fsmc,		0, -1, NULL);
 
 /* Peripheral Cluster #4 is in the always on domain */
 
 /* Peripheral Cluster #5 */
-static DEFINE_PRCC_CLK(5, gpio3, 	1, -1, NULL);
-static DEFINE_PRCC_CLK(5, usb_ed, 	0,  0, &clk_i2cclk);
-static DEFINE_PRCC_CLK(5, usb_v1, 	0,  0, NULL);
+static DEFINE_PRCC_CLK(5, gpio3,	1, -1, NULL);
+static DEFINE_PRCC_CLK(5, usb_ed,	0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(5, usb_v1,	0,  0, NULL);
 
 /* Peripheral Cluster #6 */
 
 /* MTU ID in data */
 static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1);
 static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(6, cfgreg_v1, 	6,  6, NULL);
-static DEFINE_PRCC_CLK(6, dmc_ed, 	6,  6, NULL);
-static DEFINE_PRCC_CLK(6, hash1, 	5, -1, NULL);
-static DEFINE_PRCC_CLK(6, unipro_v1, 	4,  1, &clk_uniproclk);
-static DEFINE_PRCC_CLK(6, cryp1_ed, 	4, -1, NULL);
-static DEFINE_PRCC_CLK(6, pka, 		3, -1, NULL);
-static DEFINE_PRCC_CLK(6, hash0, 	2, -1, NULL);
-static DEFINE_PRCC_CLK(6, cryp0, 	1, -1, NULL);
-static DEFINE_PRCC_CLK(6, rng_ed, 	0,  0, &clk_i2cclk);
-static DEFINE_PRCC_CLK(6, rng_v1, 	0,  0, &clk_rngclk);
+static DEFINE_PRCC_CLK(6, cfgreg_v1,	6,  6, NULL);
+static DEFINE_PRCC_CLK(6, dmc_ed,	6,  6, NULL);
+static DEFINE_PRCC_CLK(6, hash1,	5, -1, NULL);
+static DEFINE_PRCC_CLK(6, unipro_v1,	4,  1, &clk_uniproclk);
+static DEFINE_PRCC_CLK(6, cryp1_ed,	4, -1, NULL);
+static DEFINE_PRCC_CLK(6, pka,		3, -1, NULL);
+static DEFINE_PRCC_CLK(6, hash0,	2, -1, NULL);
+static DEFINE_PRCC_CLK(6, cryp0,	1, -1, NULL);
+static DEFINE_PRCC_CLK(6, rng_ed,	0,  0, &clk_i2cclk);
+static DEFINE_PRCC_CLK(6, rng_v1,	0,  0, &clk_rngclk);
 
 /* Peripheral Cluster #7 */
 
-static DEFINE_PRCC_CLK(7, tzpc0_ed, 	4, -1, NULL);
+static DEFINE_PRCC_CLK(7, tzpc0_ed,	4, -1, NULL);
 /* MTU ID in data */
 static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1);
 static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0);
-static DEFINE_PRCC_CLK(7, wdg_ed, 	1, -1, NULL);
-static DEFINE_PRCC_CLK(7, cfgreg_ed, 	0, -1, NULL);
+static DEFINE_PRCC_CLK(7, wdg_ed,	1, -1, NULL);
+static DEFINE_PRCC_CLK(7, cfgreg_ed,	0, -1, NULL);
 
-static struct clk clk_dummy_apb_pclk;
+static struct clk clk_dummy_apb_pclk = {
+	.name = "apb_pclk",
+};
 
 static struct clk_lookup u8500_common_clks[] = {
 	CLK(dummy_apb_pclk, NULL,	"apb_pclk"),
@@ -554,7 +531,7 @@ static struct clk_lookup u8500_ed_clks[] = {
 
 static struct clk_lookup u8500_v1_clks[] = {
 	/* Peripheral Cluster #1 */
-	CLK(i2c4,	"nmk-i2c.4", 	NULL),
+	CLK(i2c4,	"nmk-i2c.4",	NULL),
 	CLK(spi3_v1,	"spi3",		NULL),
 	CLK(msp1_v1,	"msp1",		NULL),
 
@@ -599,6 +576,183 @@ static struct clk_lookup u8500_v1_clks[] = {
 	CLK(uiccclk,	"uicc",		NULL),
 };
 
+#ifdef CONFIG_DEBUG_FS
+/*
+ *	debugfs support to trace clock tree hierarchy and attributes with
+ *	powerdebug
+ */
+static struct dentry *clk_debugfs_root;
+
+void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num)
+{
+	while (num--) {
+		/* Check that the clock has not been already registered */
+		if (!(cl->clk->list.prev != cl->clk->list.next))
+			list_add_tail(&cl->clk->list, &clk_list);
+
+		cl++;
+	}
+}
+
+static ssize_t usecount_dbg_read(struct file *file, char __user *buf,
+						  size_t size, loff_t *off)
+{
+	struct clk *clk = file->f_dentry->d_inode->i_private;
+	char cusecount[128];
+	unsigned int len;
+
+	len = sprintf(cusecount, "%u\n", clk->enabled);
+	return simple_read_from_buffer(buf, size, off, cusecount, len);
+}
+
+static ssize_t rate_dbg_read(struct file *file, char __user *buf,
+					  size_t size, loff_t *off)
+{
+	struct clk *clk = file->f_dentry->d_inode->i_private;
+	char crate[128];
+	unsigned int rate;
+	unsigned int len;
+
+	rate = clk_get_rate(clk);
+	len = sprintf(crate, "%u\n", rate);
+	return simple_read_from_buffer(buf, size, off, crate, len);
+}
+
+static const struct file_operations usecount_fops = {
+	.read = usecount_dbg_read,
+};
+
+static const struct file_operations set_rate_fops = {
+	.read = rate_dbg_read,
+};
+
+static struct dentry *clk_debugfs_register_dir(struct clk *c,
+						struct dentry *p_dentry)
+{
+	struct dentry *d, *clk_d, *child, *child_tmp;
+	char s[255];
+	char *p = s;
+
+	if (c->name == NULL)
+		p += sprintf(p, "BUG");
+	else
+		p += sprintf(p, "%s", c->name);
+
+	clk_d = debugfs_create_dir(s, p_dentry);
+	if (!clk_d)
+		return NULL;
+
+	d = debugfs_create_file("usecount", S_IRUGO,
+				clk_d, c, &usecount_fops);
+	if (!d)
+		goto err_out;
+	d = debugfs_create_file("rate", S_IRUGO,
+				clk_d, c, &set_rate_fops);
+	if (!d)
+		goto err_out;
+	/*
+	 * TODO : not currently available in ux500
+	 * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags);
+	 * if (!d)
+	 *	goto err_out;
+	 */
+
+	return clk_d;
+
+err_out:
+	d = clk_d;
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
+		debugfs_remove(child);
+	debugfs_remove(clk_d);
+	return NULL;
+}
+
+static void clk_debugfs_remove_dir(struct dentry *cdentry)
+{
+	struct dentry *d, *child, *child_tmp;
+
+	d = cdentry;
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
+		debugfs_remove(child);
+	debugfs_remove(cdentry);
+	return ;
+}
+
+static int clk_debugfs_register_one(struct clk *c)
+{
+	struct clk *pa = c->parent_periph;
+	struct clk *bpa = c->parent_cluster;
+
+	if (!(bpa && !pa)) {
+		c->dent = clk_debugfs_register_dir(c,
+				pa ? pa->dent : clk_debugfs_root);
+		if (!c->dent)
+			return -ENOMEM;
+	}
+
+	if (bpa) {
+		c->dent_bus = clk_debugfs_register_dir(c,
+				bpa->dent_bus ? bpa->dent_bus : bpa->dent);
+		if ((!c->dent_bus) &&  (c->dent)) {
+			clk_debugfs_remove_dir(c->dent);
+			c->dent = NULL;
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+	int err;
+	struct clk *pa = c->parent_periph;
+	struct clk *bpa = c->parent_cluster;
+
+	if (pa && (!pa->dent && !pa->dent_bus)) {
+		err = clk_debugfs_register(pa);
+		if (err)
+			return err;
+	}
+
+	if (bpa && (!bpa->dent && !bpa->dent_bus)) {
+		err = clk_debugfs_register(bpa);
+		if (err)
+			return err;
+	}
+
+	if ((!c->dent) && (!c->dent_bus)) {
+		err = clk_debugfs_register_one(c);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+	struct clk *c;
+	struct dentry *d;
+	int err;
+
+	d = debugfs_create_dir("clock", NULL);
+	if (!d)
+		return -ENOMEM;
+	clk_debugfs_root = d;
+
+	list_for_each_entry(c, &clk_list, list) {
+		err = clk_debugfs_register(c);
+		if (err)
+			goto err_out;
+	}
+	return 0;
+err_out:
+	debugfs_remove_recursive(clk_debugfs_root);
+	return err;
+}
+
+late_initcall(clk_debugfs_init);
+#endif /* defined(CONFIG_DEBUG_FS) */
+
 int __init clk_init(void)
 {
 	if (cpu_is_u8500ed()) {
@@ -609,7 +763,8 @@ int __init clk_init(void)
 		/* Clock tree for U5500 not implemented yet */
 		clk_prcc_ops.enable = clk_prcc_ops.disable = NULL;
 		clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL;
-		clk_per6clk.rate = 26000000;
+		clk_uartclk.rate = 36360000;
+		clk_sdmmcclk.rate = 99900000;
 	}
 
 	clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
@@ -618,5 +773,12 @@ int __init clk_init(void)
 	else
 		clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
 
+#ifdef CONFIG_DEBUG_FS
+	clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks));
+	if (cpu_is_u8500ed())
+		clk_debugfs_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks));
+	else
+		clk_debugfs_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks));
+#endif
 	return 0;
 }
diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h
index a0580250152..07449070522 100644
--- a/arch/arm/mach-ux500/clock.h
+++ b/arch/arm/mach-ux500/clock.h
@@ -90,6 +90,10 @@ struct clk {
 
 	struct clk		*parent_cluster;
 	struct clk		*parent_periph;
+#if defined(CONFIG_DEBUG_FS)
+	struct dentry		*dent;		/* For visible tree hierarchy */
+	struct dentry		*dent_bus;	/* For visible tree hierarchy */
+#endif
 };
 
 #define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg)		\
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 2f87075e9d6..acc841e48de 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -8,14 +8,19 @@
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
 #include <linux/io.h>
+#include <linux/irq.h>
 
 #include <asm/mach/map.h>
 
+#include <plat/gpio.h>
+
 #include <mach/hardware.h>
 #include <mach/devices.h>
 #include <mach/setup.h>
 #include <mach/irqs.h>
 
+#include "devices-db5500.h"
+
 static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K),
@@ -110,19 +115,32 @@ static struct platform_device mbox2_device = {
 };
 
 static struct platform_device *u5500_platform_devs[] __initdata = {
-	&u5500_gpio_devs[0],
-	&u5500_gpio_devs[1],
-	&u5500_gpio_devs[2],
-	&u5500_gpio_devs[3],
-	&u5500_gpio_devs[4],
-	&u5500_gpio_devs[5],
-	&u5500_gpio_devs[6],
-	&u5500_gpio_devs[7],
 	&mbox0_device,
 	&mbox1_device,
 	&mbox2_device,
 };
 
+static resource_size_t __initdata db5500_gpio_base[] = {
+	U5500_GPIOBANK0_BASE,
+	U5500_GPIOBANK1_BASE,
+	U5500_GPIOBANK2_BASE,
+	U5500_GPIOBANK3_BASE,
+	U5500_GPIOBANK4_BASE,
+	U5500_GPIOBANK5_BASE,
+	U5500_GPIOBANK6_BASE,
+	U5500_GPIOBANK7_BASE,
+};
+
+static void __init db5500_add_gpios(void)
+{
+	struct nmk_gpio_platform_data pdata = {
+		/* No custom data yet */
+	};
+
+	dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+			 IRQ_DB5500_GPIO0, &pdata);
+}
+
 void __init u5500_map_io(void)
 {
 	ux500_map_io();
@@ -132,7 +150,9 @@ void __init u5500_map_io(void)
 
 void __init u5500_init_devices(void)
 {
-	ux500_init_devices();
+	db5500_add_gpios();
+	db5500_dma_init();
+	db5500_add_rtc();
 
 	platform_add_devices(u5500_platform_devs,
 			     ARRAY_SIZE(u5500_platform_devs));
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 4acab7544b3..c0f34a404c5 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -22,23 +22,15 @@
 #include <mach/setup.h>
 #include <mach/devices.h>
 
+#include "devices-db8500.h"
+
 static struct platform_device *platform_devs[] __initdata = {
-	&u8500_gpio_devs[0],
-	&u8500_gpio_devs[1],
-	&u8500_gpio_devs[2],
-	&u8500_gpio_devs[3],
-	&u8500_gpio_devs[4],
-	&u8500_gpio_devs[5],
-	&u8500_gpio_devs[6],
-	&u8500_gpio_devs[7],
-	&u8500_gpio_devs[8],
 	&u8500_dma40_device,
 };
 
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
-	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
 	__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
@@ -46,13 +38,18 @@ static struct map_desc u8500_io_desc[] __initdata = {
 	__MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M),
 };
 
-static struct map_desc u8500ed_io_desc[] __initdata = {
+static struct map_desc u8500_ed_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K),
 	__IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K),
 };
 
-static struct map_desc u8500v1_io_desc[] __initdata = {
+static struct map_desc u8500_v1_io_desc[] __initdata = {
 	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE_V1, SZ_4K),
+};
+
+static struct map_desc u8500_v2_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
 };
 
 /*
@@ -125,14 +122,38 @@ void __init u8500_map_io(void)
 	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
 
 	if (cpu_is_u8500ed())
-		iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc));
-	else
-		iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc));
+		iotable_init(u8500_ed_io_desc, ARRAY_SIZE(u8500_ed_io_desc));
+	else if (cpu_is_u8500v1())
+		iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc));
+	else if (cpu_is_u8500v2())
+		iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc));
 
 	/* Read out the ASIC ID as early as we can */
 	get_db8500_asic_id();
 }
 
+static resource_size_t __initdata db8500_gpio_base[] = {
+	U8500_GPIOBANK0_BASE,
+	U8500_GPIOBANK1_BASE,
+	U8500_GPIOBANK2_BASE,
+	U8500_GPIOBANK3_BASE,
+	U8500_GPIOBANK4_BASE,
+	U8500_GPIOBANK5_BASE,
+	U8500_GPIOBANK6_BASE,
+	U8500_GPIOBANK7_BASE,
+	U8500_GPIOBANK8_BASE,
+};
+
+static void __init db8500_add_gpios(void)
+{
+	struct nmk_gpio_platform_data pdata = {
+		/* No custom data yet */
+	};
+
+	dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+			 IRQ_DB8500_GPIO0, &pdata);
+}
+
 /*
  * This function is called from the board init
  */
@@ -152,12 +173,13 @@ void __init u8500_init_devices(void)
 	else
 		pr_warning("ASIC: UNKNOWN SILICON VERSION!\n");
 
-	ux500_init_devices();
-
 	if (cpu_is_u8500ed())
 		dma40_u8500ed_fixup();
 
-	/* Register the platform devices */
+	db8500_add_rtc();
+	db8500_add_gpios();
+
+	platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
 	return ;
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 73fb1a551ec..5730409c0f7 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/platform_device.h>
-#include <linux/amba/bus.h>
 #include <linux/io.h>
 #include <linux/clk.h>
 
@@ -20,6 +19,7 @@
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
+#include <mach/prcmu.h>
 
 #include "clock.h"
 
@@ -45,29 +45,22 @@ static struct map_desc ux500_io_desc[] __initdata = {
 	__IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K),
 };
 
-static struct amba_device *ux500_amba_devs[] __initdata = {
-	&ux500_pl031_device,
-};
-
 void __init ux500_map_io(void)
 {
 	iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc));
 }
 
-void __init ux500_init_devices(void)
-{
-	amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs));
-}
-
 void __init ux500_init_irq(void)
 {
-	gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+	gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE),
+		 __io_address(UX500_GIC_CPU_BASE));
 
 	/*
 	 * Init clocks here so that they are available for system timer
 	 * initialization.
 	 */
+	if (cpu_is_u8500())
+		prcmu_early_init();
 	clk_init();
 }
 
@@ -75,14 +68,14 @@ void __init ux500_init_irq(void)
 static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask)
 {
 	/* wait for the operation to complete */
-	while (readl(reg) & mask)
+	while (readl_relaxed(reg) & mask)
 		;
 }
 
 static inline void ux500_cache_sync(void)
 {
 	void __iomem *base = __io_address(UX500_L2CC_BASE);
-	writel(0, base + L2X0_CACHE_SYNC);
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
 	ux500_cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -107,7 +100,7 @@ static void ux500_l2x0_inv_all(void)
 	uint32_t l2x0_way_mask = (1<<16) - 1;	/* Bitmask of active ways */
 
 	/* invalidate all ways */
-	writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
 	ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	ux500_cache_sync();
 }
diff --git a/arch/arm/mach-ux500/cpufreq.c b/arch/arm/mach-ux500/cpufreq.c
new file mode 100644
index 00000000000..5c5b747f134
--- /dev/null
+++ b/arch/arm/mach-ux500/cpufreq.c
@@ -0,0 +1,211 @@
+/*
+ * CPU frequency scaling for u8500
+ * Inspired by linux/arch/arm/mach-davinci/cpufreq.c
+ *
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+
+#include <mach/hardware.h>
+#include <mach/prcmu.h>
+#include <mach/prcmu-defs.h>
+
+#define DRIVER_NAME "cpufreq-u8500"
+#define CPUFREQ_NAME "u8500"
+
+static struct device *dev;
+
+static struct cpufreq_frequency_table freq_table[] = {
+	[0] = {
+		.index = 0,
+		.frequency = 200000,
+	},
+	[1] = {
+		.index = 1,
+		.frequency = 300000,
+	},
+	[2] = {
+		.index = 2,
+		.frequency = 600000,
+	},
+	[3] = {
+		/* Used for CPU_OPP_MAX, if available */
+		.index = 3,
+		.frequency = CPUFREQ_TABLE_END,
+	},
+	[4] = {
+		.index = 4,
+		.frequency = CPUFREQ_TABLE_END,
+	},
+};
+
+static enum prcmu_cpu_opp index2opp[] = {
+	CPU_OPP_EXT_CLK,
+	CPU_OPP_50,
+	CPU_OPP_100,
+	CPU_OPP_MAX
+};
+
+static int u8500_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, freq_table);
+}
+
+static int u8500_cpufreq_target(struct cpufreq_policy *policy,
+				unsigned int target_freq,
+				unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	unsigned int index;
+	int ret = 0;
+
+	/*
+	 * Ensure desired rate is within allowed range.  Some govenors
+	 * (ondemand) will just pass target_freq=0 to get the minimum.
+	 */
+	if (target_freq < policy->cpuinfo.min_freq)
+		target_freq = policy->cpuinfo.min_freq;
+	if (target_freq > policy->cpuinfo.max_freq)
+		target_freq = policy->cpuinfo.max_freq;
+
+	ret = cpufreq_frequency_table_target(policy, freq_table,
+					     target_freq, relation, &index);
+	if (ret < 0) {
+		dev_err(dev, "Could not look up next frequency\n");
+		return ret;
+	}
+
+	freqs.old = policy->cur;
+	freqs.new = freq_table[index].frequency;
+	freqs.cpu = policy->cpu;
+
+	if (freqs.old == freqs.new) {
+		dev_dbg(dev, "Current and target frequencies are equal\n");
+		return 0;
+	}
+
+	dev_dbg(dev, "transition: %u --> %u\n", freqs.old, freqs.new);
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	ret = prcmu_set_cpu_opp(index2opp[index]);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set OPP level\n");
+		return ret;
+	}
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return ret;
+}
+
+static unsigned int u8500_cpufreq_getspeed(unsigned int cpu)
+{
+	int i;
+
+	for (i = 0; prcmu_get_cpu_opp() != index2opp[i]; i++)
+		;
+	return freq_table[i].frequency;
+}
+
+static int __cpuinit u8500_cpu_init(struct cpufreq_policy *policy)
+{
+	int res;
+
+	BUILD_BUG_ON(ARRAY_SIZE(index2opp) + 1 != ARRAY_SIZE(freq_table));
+
+	if (cpu_is_u8500v2()) {
+		freq_table[1].frequency = 400000;
+		freq_table[2].frequency = 800000;
+		if (prcmu_has_arm_maxopp())
+			freq_table[3].frequency = 1000000;
+	}
+
+	/* get policy fields based on the table */
+	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+	if (!res)
+		cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+	else {
+		dev_err(dev, "u8500-cpufreq : Failed to read policy table\n");
+		return res;
+	}
+
+	policy->min = policy->cpuinfo.min_freq;
+	policy->max = policy->cpuinfo.max_freq;
+	policy->cur = u8500_cpufreq_getspeed(policy->cpu);
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+	/*
+	 * FIXME : Need to take time measurement across the target()
+	 *	   function with no/some/all drivers in the notification
+	 *	   list.
+	 */
+	policy->cpuinfo.transition_latency = 200 * 1000; /* in ns */
+
+	/* policy sharing between dual CPUs */
+	cpumask_copy(policy->cpus, &cpu_present_map);
+
+	policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+
+	return res;
+}
+
+static struct freq_attr *u8500_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+static int u8500_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct cpufreq_driver u8500_driver = {
+	.owner = THIS_MODULE,
+	.flags = CPUFREQ_STICKY,
+	.verify = u8500_cpufreq_verify_speed,
+	.target = u8500_cpufreq_target,
+	.get = u8500_cpufreq_getspeed,
+	.init = u8500_cpu_init,
+	.exit = u8500_cpu_exit,
+	.name = CPUFREQ_NAME,
+	.attr = u8500_cpufreq_attr,
+};
+
+static int __init u8500_cpufreq_probe(struct platform_device *pdev)
+{
+	dev = &pdev->dev;
+	return cpufreq_register_driver(&u8500_driver);
+}
+
+static int __exit u8500_cpufreq_remove(struct platform_device *pdev)
+{
+	return cpufreq_unregister_driver(&u8500_driver);
+}
+
+static struct platform_driver u8500_cpufreq_driver = {
+	.driver = {
+		.name	 = DRIVER_NAME,
+		.owner	 = THIS_MODULE,
+	},
+	.remove = __exit_p(u8500_cpufreq_remove),
+};
+
+static int __init u8500_cpufreq_init(void)
+{
+	return platform_driver_probe(&u8500_cpufreq_driver,
+				     &u8500_cpufreq_probe);
+}
+
+device_initcall(u8500_cpufreq_init);
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
new file mode 100644
index 00000000000..fe69f5fac1b
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/amba/bus.h>
+
+#include <plat/gpio.h>
+
+#include <mach/hardware.h>
+
+#include "devices-common.h"
+
+struct amba_device *
+dbx500_add_amba_device(const char *name, resource_size_t base,
+		       int irq, void *pdata, unsigned int periphid)
+{
+	struct amba_device *dev;
+	int ret;
+
+	dev = kzalloc(sizeof *dev, GFP_KERNEL);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	dev->dev.init_name = name;
+
+	dev->res.start = base;
+	dev->res.end = base + SZ_4K - 1;
+	dev->res.flags = IORESOURCE_MEM;
+
+	dev->dma_mask = DMA_BIT_MASK(32);
+	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+
+	dev->irq[0] = irq;
+	dev->irq[1] = NO_IRQ;
+
+	dev->periphid = periphid;
+
+	dev->dev.platform_data = pdata;
+
+	ret = amba_device_register(dev, &iomem_resource);
+	if (ret) {
+		kfree(dev);
+		return ERR_PTR(ret);
+	}
+
+	return dev;
+}
+
+static struct platform_device *
+dbx500_add_platform_device(const char *name, int id, void *pdata,
+			   struct resource *res, int resnum)
+{
+	struct platform_device *dev;
+	int ret;
+
+	dev = platform_device_alloc(name, id);
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+	dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
+
+	ret = platform_device_add_resources(dev, res, resnum);
+	if (ret)
+		goto out_free;
+
+	dev->dev.platform_data = pdata;
+
+	ret = platform_device_add(dev);
+	if (ret)
+		goto out_free;
+
+	return dev;
+
+out_free:
+	platform_device_put(dev);
+	return ERR_PTR(ret);
+}
+
+struct platform_device *
+dbx500_add_platform_device_4k1irq(const char *name, int id,
+				  resource_size_t base,
+				  int irq, void *pdata)
+{
+	struct resource resources[] = {
+		[0] = {
+			.start	= base,
+			.end	= base + SZ_4K - 1,
+			.flags	= IORESOURCE_MEM,
+		},
+		[1] = {
+			.start	= irq,
+			.end	= irq,
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+
+	return dbx500_add_platform_device(name, id, pdata, resources,
+					  ARRAY_SIZE(resources));
+}
+
+static struct platform_device *
+dbx500_add_gpio(int id, resource_size_t addr, int irq,
+		struct nmk_gpio_platform_data *pdata)
+{
+	struct resource resources[] = {
+		{
+			.start	= addr,
+			.end	= addr + 127,
+			.flags	= IORESOURCE_MEM,
+		},
+		{
+			.start	= irq,
+			.end	= irq,
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+
+	return platform_device_register_resndata(NULL, "gpio", id,
+				resources, ARRAY_SIZE(resources),
+				pdata, sizeof(*pdata));
+}
+
+void dbx500_add_gpios(resource_size_t *base, int num, int irq,
+		      struct nmk_gpio_platform_data *pdata)
+{
+	int first = 0;
+	int i;
+
+	for (i = 0; i < num; i++, first += 32, irq++) {
+		pdata->first_gpio = first;
+		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
+
+		dbx500_add_gpio(i, base[i], irq, pdata);
+	}
+}
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
new file mode 100644
index 00000000000..cbadc117d2d
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -0,0 +1,82 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_COMMON_H
+#define __DEVICES_COMMON_H
+
+extern struct amba_device *
+dbx500_add_amba_device(const char *name, resource_size_t base,
+		       int irq, void *pdata, unsigned int periphid);
+
+extern struct platform_device *
+dbx500_add_platform_device_4k1irq(const char *name, int id,
+				  resource_size_t base,
+				  int irq, void *pdata);
+
+struct spi_master_cntlr;
+
+static inline struct amba_device *
+dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+		   struct spi_master_cntlr *pdata)
+{
+	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+}
+
+static inline struct amba_device *
+dbx500_add_spi(const char *name, resource_size_t base, int irq,
+				   struct spi_master_cntlr *pdata)
+{
+	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+}
+
+struct mmci_platform_data;
+
+static inline struct amba_device *
+dbx500_add_sdi(const char *name, resource_size_t base, int irq,
+	       struct mmci_platform_data *pdata)
+{
+	return dbx500_add_amba_device(name, base, irq, pdata, 0);
+}
+
+static inline struct amba_device *
+dbx500_add_uart(const char *name, resource_size_t base, int irq)
+{
+	return dbx500_add_amba_device(name, base, irq, NULL, 0);
+}
+
+struct nmk_i2c_controller;
+
+static inline struct platform_device *
+dbx500_add_i2c(int id, resource_size_t base, int irq,
+	       struct nmk_i2c_controller *pdata)
+{
+	return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
+						 pdata);
+}
+
+struct msp_i2s_platform_data;
+
+static inline struct platform_device *
+dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
+		   struct msp_i2s_platform_data *pdata)
+{
+	return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq,
+						 pdata);
+}
+
+static inline struct amba_device *
+dbx500_add_rtc(resource_size_t base, int irq)
+{
+	return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+}
+
+struct nmk_gpio_platform_data;
+
+void dbx500_add_gpios(resource_size_t *base, int num, int irq,
+		      struct nmk_gpio_platform_data *pdata);
+
+#endif
diff --git a/arch/arm/mach-ux500/devices-db5500.c b/arch/arm/mach-ux500/devices-db5500.c
deleted file mode 100644
index 33e5b56bebb..00000000000
--- a/arch/arm/mach-ux500/devices-db5500.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <mach/hardware.h>
-#include <mach/devices.h>
-
-static struct nmk_gpio_platform_data u5500_gpio_data[] = {
-	GPIO_DATA("GPIO-0-31", 0),
-	GPIO_DATA("GPIO-32-63", 32), /* 36..63 not routed to pin */
-	GPIO_DATA("GPIO-64-95", 64), /* 83..95 not routed to pin */
-	GPIO_DATA("GPIO-96-127", 96), /* 102..127 not routed to pin */
-	GPIO_DATA("GPIO-128-159", 128), /* 149..159 not routed to pin */
-	GPIO_DATA("GPIO-160-191", 160),
-	GPIO_DATA("GPIO-192-223", 192),
-	GPIO_DATA("GPIO-224-255", 224), /* 228..255 not routed to pin */
-};
-
-static struct resource u5500_gpio_resources[] = {
-	GPIO_RESOURCE(0),
-	GPIO_RESOURCE(1),
-	GPIO_RESOURCE(2),
-	GPIO_RESOURCE(3),
-	GPIO_RESOURCE(4),
-	GPIO_RESOURCE(5),
-	GPIO_RESOURCE(6),
-	GPIO_RESOURCE(7),
-};
-
-struct platform_device u5500_gpio_devs[] = {
-	GPIO_DEVICE(0),
-	GPIO_DEVICE(1),
-	GPIO_DEVICE(2),
-	GPIO_DEVICE(3),
-	GPIO_DEVICE(4),
-	GPIO_DEVICE(5),
-	GPIO_DEVICE(6),
-	GPIO_DEVICE(7),
-};
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
new file mode 100644
index 00000000000..c8d7901c1f2
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -0,0 +1,66 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_DB5500_H
+#define __DEVICES_DB5500_H
+
+#include "devices-common.h"
+
+#define db5500_add_i2c1(pdata) \
+	dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(pdata) \
+	dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(pdata) \
+	dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+
+#define db5500_add_msp0_i2s(pdata) \
+	dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_i2s(pdata) \
+	dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_i2s(pdata) \
+	dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+
+#define db5500_add_msp0_spi(pdata) \
+	dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(pdata) \
+	dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(pdata) \
+	dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+
+#define db5500_add_rtc() \
+	dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+
+#define db5500_add_sdi0(pdata) \
+	dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata)
+#define db5500_add_sdi1(pdata) \
+	dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata)
+#define db5500_add_sdi2(pdata) \
+	dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata)
+#define db5500_add_sdi3(pdata) \
+	dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata)
+#define db5500_add_sdi4(pdata) \
+	dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata)
+
+#define db5500_add_spi0(pdata) \
+	dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata)
+#define db5500_add_spi1(pdata) \
+	dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata)
+#define db5500_add_spi2(pdata) \
+	dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata)
+#define db5500_add_spi3(pdata) \
+	dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata)
+
+#define db5500_add_uart0() \
+	dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0)
+#define db5500_add_uart1() \
+	dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1)
+#define db5500_add_uart2() \
+	dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2)
+#define db5500_add_uart3() \
+	dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3)
+
+#endif
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 4a94be3304b..23c695d5497 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -19,173 +19,6 @@
 
 #include "ste-dma40-db8500.h"
 
-static struct nmk_gpio_platform_data u8500_gpio_data[] = {
-	GPIO_DATA("GPIO-0-31", 0),
-	GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */
-	GPIO_DATA("GPIO-64-95", 64),
-	GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */
-	GPIO_DATA("GPIO-128-159", 128),
-	GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */
-	GPIO_DATA("GPIO-192-223", 192),
-	GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */
-	GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */
-};
-
-static struct resource u8500_gpio_resources[] = {
-	GPIO_RESOURCE(0),
-	GPIO_RESOURCE(1),
-	GPIO_RESOURCE(2),
-	GPIO_RESOURCE(3),
-	GPIO_RESOURCE(4),
-	GPIO_RESOURCE(5),
-	GPIO_RESOURCE(6),
-	GPIO_RESOURCE(7),
-	GPIO_RESOURCE(8),
-};
-
-struct platform_device u8500_gpio_devs[] = {
-	GPIO_DEVICE(0),
-	GPIO_DEVICE(1),
-	GPIO_DEVICE(2),
-	GPIO_DEVICE(3),
-	GPIO_DEVICE(4),
-	GPIO_DEVICE(5),
-	GPIO_DEVICE(6),
-	GPIO_DEVICE(7),
-	GPIO_DEVICE(8),
-};
-
-struct amba_device u8500_ssp0_device = {
-	.dev = {
-		.coherent_dma_mask = ~0,
-		.init_name = "ssp0",
-	},
-	.res = {
-		.start = U8500_SSP0_BASE,
-		.end   = U8500_SSP0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_DB8500_SSP0, NO_IRQ },
-	/* ST-Ericsson modified id */
-	.periphid = SSP_PER_ID,
-};
-
-static struct resource u8500_i2c0_resources[] = {
-	[0] = {
-		.start	= U8500_I2C0_BASE,
-		.end	= U8500_I2C0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DB8500_I2C0,
-		.end	= IRQ_DB8500_I2C0,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device u8500_i2c0_device = {
-	.name		= "nmk-i2c",
-	.id		= 0,
-	.resource	= u8500_i2c0_resources,
-	.num_resources	= ARRAY_SIZE(u8500_i2c0_resources),
-};
-
-static struct resource u8500_i2c4_resources[] = {
-	[0] = {
-		.start	= U8500_I2C4_BASE,
-		.end	= U8500_I2C4_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DB8500_I2C4,
-		.end	= IRQ_DB8500_I2C4,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device u8500_i2c4_device = {
-	.name		= "nmk-i2c",
-	.id		= 4,
-	.resource	= u8500_i2c4_resources,
-	.num_resources	= ARRAY_SIZE(u8500_i2c4_resources),
-};
-
-/*
- * SD/MMC
- */
-
-struct amba_device u8500_sdi0_device = {
-	.dev		= {
-		.init_name = "sdi0",
-	},
-	.res		= {
-		.start	= U8500_SDI0_BASE,
-		.end	= U8500_SDI0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= {IRQ_DB8500_SDMMC0, NO_IRQ},
-};
-
-struct amba_device u8500_sdi1_device = {
-	.dev		= {
-		.init_name = "sdi1",
-	},
-	.res		= {
-		.start	= U8500_SDI1_BASE,
-		.end	= U8500_SDI1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= {IRQ_DB8500_SDMMC1, NO_IRQ},
-};
-
-struct amba_device u8500_sdi2_device = {
-	.dev		= {
-		.init_name = "sdi2",
-	},
-	.res		= {
-		.start	= U8500_SDI2_BASE,
-		.end	= U8500_SDI2_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= {IRQ_DB8500_SDMMC2, NO_IRQ},
-};
-
-struct amba_device u8500_sdi3_device = {
-	.dev		= {
-		.init_name = "sdi3",
-	},
-	.res		= {
-		.start	= U8500_SDI3_BASE,
-		.end	= U8500_SDI3_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= {IRQ_DB8500_SDMMC3, NO_IRQ},
-};
-
-struct amba_device u8500_sdi4_device = {
-	.dev		= {
-		.init_name = "sdi4",
-	},
-	.res		= {
-		.start	= U8500_SDI4_BASE,
-		.end	= U8500_SDI4_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= {IRQ_DB8500_SDMMC4, NO_IRQ},
-};
-
-struct amba_device u8500_sdi5_device = {
-	.dev		= {
-		.init_name = "sdi5",
-	},
-	.res		= {
-		.start	= U8500_SDI5_BASE,
-		.end	= U8500_SDI5_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= {IRQ_DB8500_SDMMC5, NO_IRQ},
-};
-
 static struct resource dma40_resources[] = {
 	[0] = {
 		.start = U8500_DMA_BASE,
@@ -295,7 +128,7 @@ struct resource keypad_resources[] = {
 	},
 };
 
-struct platform_device ux500_ske_keypad_device = {
+struct platform_device u8500_ske_keypad_device = {
 	.name = "nmk-ske-keypad",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(keypad_resources),
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
new file mode 100644
index 00000000000..3a770c75697
--- /dev/null
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * License terms: GNU General Public License (GPL), version 2.
+ */
+
+#ifndef __DEVICES_DB8500_H
+#define __DEVICES_DB8500_H
+
+#include "devices-common.h"
+
+struct ske_keypad_platform_data;
+struct pl022_ssp_controller;
+
+static inline struct platform_device *
+db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+{
+	return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
+						 U8500_SKE_BASE,
+						 IRQ_DB8500_KB, pdata);
+}
+
+static inline struct amba_device *
+db8500_add_ssp(const char *name, resource_size_t base, int irq,
+	       struct pl022_ssp_controller *pdata)
+{
+	return dbx500_add_amba_device(name, base, irq, pdata, SSP_PER_ID);
+}
+
+
+#define db8500_add_i2c0(pdata) \
+	dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(pdata) \
+	dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(pdata) \
+	dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(pdata) \
+	dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(pdata) \
+	dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(pdata) \
+	dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(pdata) \
+	dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(pdata) \
+	dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(pdata) \
+	dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(pdata) \
+	dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(pdata) \
+	dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(pdata) \
+	dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(pdata) \
+	dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc() \
+	dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_sdi0(pdata) \
+	dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata)
+#define db8500_add_sdi1(pdata) \
+	dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata)
+#define db8500_add_sdi2(pdata) \
+	dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata)
+#define db8500_add_sdi3(pdata) \
+	dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata)
+#define db8500_add_sdi4(pdata) \
+	dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata)
+#define db8500_add_sdi5(pdata) \
+	dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata)
+
+#define db8500_add_ssp0(pdata) \
+	db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(pdata) \
+	db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(pdata) \
+	dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata)
+#define db8500_add_spi1(pdata) \
+	dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata)
+#define db8500_add_spi2(pdata) \
+	dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata)
+#define db8500_add_spi3(pdata) \
+	dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata)
+
+#define db8500_add_uart0() \
+	dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0)
+#define db8500_add_uart1() \
+	dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1)
+#define db8500_add_uart2() \
+	dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2)
+
+#endif
diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c
index 8a268893cb7..ea0a2f92ca7 100644
--- a/arch/arm/mach-ux500/devices.c
+++ b/arch/arm/mach-ux500/devices.c
@@ -14,69 +14,6 @@
 #include <mach/hardware.h>
 #include <mach/setup.h>
 
-#define __MEM_4K_RESOURCE(x) \
-	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
-
-struct amba_device ux500_pl031_device = {
-	.dev = {
-		.init_name = "pl031",
-	},
-	.res = {
-		.start	= UX500_RTC_BASE,
-		.end	= UX500_RTC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq = {IRQ_RTC_RTT, NO_IRQ},
-};
-
-struct amba_device ux500_uart0_device = {
-	.dev = { .init_name = "uart0" },
-	__MEM_4K_RESOURCE(UX500_UART0_BASE),
-	.irq = {IRQ_UART0, NO_IRQ},
-};
-
-struct amba_device ux500_uart1_device = {
-	.dev = { .init_name = "uart1" },
-	__MEM_4K_RESOURCE(UX500_UART1_BASE),
-	.irq = {IRQ_UART1, NO_IRQ},
-};
-
-struct amba_device ux500_uart2_device = {
-	.dev = { .init_name = "uart2" },
-	__MEM_4K_RESOURCE(UX500_UART2_BASE),
-	.irq = {IRQ_UART2, NO_IRQ},
-};
-
-#define UX500_I2C_RESOURCES(id, size)				\
-static struct resource ux500_i2c##id##_resources[] = {		\
-	[0] = {							\
-		.start	= UX500_I2C##id##_BASE,			\
-		.end	= UX500_I2C##id##_BASE + size - 1,	\
-		.flags	= IORESOURCE_MEM,			\
-	},							\
-	[1] = {							\
-		.start	= IRQ_I2C##id,				\
-		.end	= IRQ_I2C##id,				\
-		.flags	= IORESOURCE_IRQ			\
-	}							\
-}
-
-UX500_I2C_RESOURCES(1, SZ_4K);
-UX500_I2C_RESOURCES(2, SZ_4K);
-UX500_I2C_RESOURCES(3, SZ_4K);
-
-#define UX500_I2C_PDEVICE(cid)					\
-struct platform_device ux500_i2c##cid##_device = {		\
-	.name		= "nmk-i2c",				\
-	.id		= cid,					\
-	.num_resources	= 2,					\
-	.resource	= ux500_i2c##cid##_resources,		\
-}
-
-UX500_I2C_PDEVICE(1);
-UX500_I2C_PDEVICE(2);
-UX500_I2C_PDEVICE(3);
-
 void __init amba_add_devices(struct amba_device *devs[], int num)
 {
 	int i;
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
new file mode 100644
index 00000000000..32a061f8a95
--- /dev/null
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/ste_dma40.h>
+#include <mach/setup.h>
+#include <mach/hardware.h>
+
+#include "ste-dma40-db5500.h"
+
+static struct resource dma40_resources[] = {
+	[0] = {
+		.start = U5500_DMA_BASE,
+		.end   = U5500_DMA_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+		.name  = "base",
+	},
+	[1] = {
+		.start = U5500_DMA_LCPA_BASE,
+		.end   = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
+		.flags = IORESOURCE_MEM,
+		.name  = "lcpa",
+	},
+	[2] = {
+		.start = IRQ_DB5500_DMA,
+		.end   = IRQ_DB5500_DMA,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+/* Default configuration for physical memcpy */
+static struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
+	.mode = STEDMA40_MODE_PHYSICAL,
+	.dir = STEDMA40_MEM_TO_MEM,
+
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.src_info.psize = STEDMA40_PSIZE_PHY_1,
+	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
+	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+
+/* Default configuration for logical memcpy */
+static struct stedma40_chan_cfg dma40_memcpy_conf_log = {
+	.dir = STEDMA40_MEM_TO_MEM,
+
+	.src_info.data_width = STEDMA40_BYTE_WIDTH,
+	.src_info.psize = STEDMA40_PSIZE_LOG_1,
+	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+
+	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
+	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
+	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
+};
+
+/*
+ * Mapping between soruce event lines and physical device address This was
+ * created assuming that the event line is tied to a device and therefore the
+ * address is constant, however this is not true for at least USB, and the
+ * values are just placeholders for USB.  This table is preserved and used for
+ * now.
+ */
+static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = {
+	[DB5500_DMA_DEV24_SDMMC0_RX] = -1,
+};
+
+/* Mapping between destination event lines and physical device address */
+static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = {
+	[DB5500_DMA_DEV24_SDMMC0_TX] = -1,
+};
+
+static int dma40_memcpy_event[] = {
+	DB5500_DMA_MEMCPY_TX_1,
+	DB5500_DMA_MEMCPY_TX_2,
+	DB5500_DMA_MEMCPY_TX_3,
+	DB5500_DMA_MEMCPY_TX_4,
+	DB5500_DMA_MEMCPY_TX_5,
+};
+
+static struct stedma40_platform_data dma40_plat_data = {
+	.dev_len		= ARRAY_SIZE(dma40_rx_map),
+	.dev_rx			= dma40_rx_map,
+	.dev_tx			= dma40_tx_map,
+	.memcpy			= dma40_memcpy_event,
+	.memcpy_len		= ARRAY_SIZE(dma40_memcpy_event),
+	.memcpy_conf_phy	= &dma40_memcpy_conf_phy,
+	.memcpy_conf_log	= &dma40_memcpy_conf_log,
+	.disabled_channels	= {-1},
+};
+
+static struct platform_device dma40_device = {
+	.dev = {
+		.platform_data = &dma40_plat_data,
+	},
+	.name		= "dma40",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dma40_resources),
+	.resource	= dma40_resources
+};
+
+void __init db5500_dma_init(void)
+{
+	int ret;
+
+	ret = platform_device_register(&dma40_device);
+	if (ret)
+		dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
+
+}
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
index a6be2cdf2b2..64fa451edcf 100644
--- a/arch/arm/mach-ux500/headsmp.S
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -23,7 +23,6 @@ ENTRY(u8500_secondary_startup)
 	ldmia	r4, {r5, r6}
 	sub	r4, r4, r5
 	add	r6, r6, r4
-	dsb
 pen:	ldr	r7, [r6]
 	cmp	r7, r0
 	bne	pen
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index b782a03024b..dd8037ebccf 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -11,14 +11,11 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/smp.h>
-#include <linux/completion.h>
 
 #include <asm/cacheflush.h>
 
 extern volatile int pen_release;
 
-static DECLARE_COMPLETION(cpu_killed);
-
 static inline void platform_do_lowpower(unsigned int cpu)
 {
 	flush_cache_all();
@@ -38,7 +35,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
 
 int platform_cpu_kill(unsigned int cpu)
 {
-	return wait_for_completion_timeout(&cpu_killed, 5000);
+	return 1;
 }
 
 /*
@@ -48,19 +45,6 @@ int platform_cpu_kill(unsigned int cpu)
  */
 void platform_cpu_die(unsigned int cpu)
 {
-#ifdef DEBUG
-	unsigned int this_cpu = hard_smp_processor_id();
-
-	if (cpu != this_cpu) {
-		printk(KERN_CRIT "Eek! platform_cpu_die running on %u, should be %u\n",
-			   this_cpu, cpu);
-		BUG();
-	}
-#endif
-
-	printk(KERN_NOTICE "CPU%u: shutdown\n", cpu);
-	complete(&cpu_killed);
-
 	/* directly enter low power state, skipping secure registers */
 	platform_do_lowpower(cpu);
 }
diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h
index 3eafc0e24ba..bd88c1e7406 100644
--- a/arch/arm/mach-ux500/include/mach/db5500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h
@@ -114,4 +114,8 @@
 #define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)
 #define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)
 
+#define U5500_ESRAM_BASE		0x40000000
+#define U5500_ESRAM_DMA_LCPA_OFFSET	0x10000
+#define U5500_DMA_LCPA_BASE    (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)
+
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index f07d0986409..0fefb34c11e 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -92,7 +92,8 @@
 #define U8500_SCR_BASE		(U8500_PER4_BASE + 0x05000)
 #define U8500_DMC_BASE		(U8500_PER4_BASE + 0x06000)
 #define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x07000)
-#define U8500_PRCMU_TCDM_BASE	(U8500_PER4_BASE + 0x0f000)
+#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000)
+#define U8500_PRCMU_TCDM_BASE   (U8500_PER4_BASE + 0x68000)
 
 /* per3 base addresses */
 #define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h
index b91a4d1211a..020b6369a30 100644
--- a/arch/arm/mach-ux500/include/mach/devices.h
+++ b/arch/arm/mach-ux500/include/mach/devices.h
@@ -14,27 +14,10 @@ extern struct platform_device u5500_gpio_devs[];
 extern struct platform_device u8500_gpio_devs[];
 
 extern struct amba_device ux500_pl031_device;
-extern struct amba_device u8500_ssp0_device;
-extern struct amba_device ux500_uart0_device;
-extern struct amba_device ux500_uart1_device;
-extern struct amba_device ux500_uart2_device;
 
-extern struct platform_device ux500_i2c1_device;
-extern struct platform_device ux500_i2c2_device;
-extern struct platform_device ux500_i2c3_device;
-
-extern struct platform_device u8500_i2c0_device;
-extern struct platform_device u8500_i2c4_device;
 extern struct platform_device u8500_dma40_device;
 extern struct platform_device ux500_ske_keypad_device;
 
-extern struct amba_device u8500_sdi0_device;
-extern struct amba_device u8500_sdi1_device;
-extern struct amba_device u8500_sdi2_device;
-extern struct amba_device u8500_sdi3_device;
-extern struct amba_device u8500_sdi4_device;
-extern struct amba_device u8500_sdi5_device;
-
 void dma40_u8500ed_fixup(void);
 
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
index 60ea88db828..a37f585a3ec 100644
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -11,7 +11,8 @@
  * warranty of any kind, whether express or implied.
  */
 #include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#define HAVE_GET_IRQNR_PREAMBLE
+#include <asm/hardware/entry-macro-gic.S>
 
 		.macro	disable_fiq
 		.endm
@@ -22,68 +23,3 @@
 
 		.macro  arch_ret_to_user, tmp1, tmp2
 		.endm
-
-		/*
-		 * The interrupt numbering scheme is defined in the
-		 * interrupt controller spec.  To wit:
-		 *
-		 * Interrupts 0-15 are IPI
-		 * 16-28 are reserved
-		 * 29-31 are local.  We allow 30 to be used for the watchdog.
-		 * 32-1020 are global
-		 * 1021-1022 are reserved
-		 * 1023 is "spurious" (no interrupt)
-		 *
-		 * For now, we ignore all local interrupts so only return an
-		 * interrupt if it's between 30 and 1020. The test_for_ipi
-		 * routine below will pick up on IPIs.
-		 *
-		 * A simple read from the controller will tell us the number
-		 * of the highest priority enabled interrupt. We then just
-		 * need to check whether it is in the valid range for an
-		 * IRQ (30-1020 inclusive).
-		 */
-
-		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-
-		/* bits 12-10 = src CPU, 9-0 = int # */
-		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
-
-		ldr	\tmp, =1021
-
-		bic     \irqnr, \irqstat, #0x1c00
-
-		cmp     \irqnr, #29
-		cmpcc	\irqnr, \irqnr
-		cmpne	\irqnr, \tmp
-		cmpcs	\irqnr, \irqnr
-
-		.endm
-
-		/* We assume that irqstat (the raw value of the IRQ
-		 * acknowledge register) is preserved from the macro above.
-		 * If there is an IPI, we immediately signal end of
-		 * interrupt on the controller, since this requires the
-		 * original irqstat value which we won't easily be able
-		 * to recreate later.
-		 */
-
-		.macro test_for_ipi, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		cmp	\irqnr, #16
-		strcc	\irqstat, [\base, #GIC_CPU_EOI]
-		cmpcs	\irqnr, \irqnr
-		.endm
-
-		/* As above, this assumes that irqstat and base
-		 * are preserved..
-		 */
-
-		.macro test_for_ltirq, irqnr, irqstat, base, tmp
-		bic	\irqnr, \irqstat, #0x1c00
-		mov 	\tmp, #0
-		cmp	\irqnr, #29
-		moveq	\tmp, #1
-		streq	\irqstat, [\base, #GIC_CPU_EOI]
-		cmp	\tmp, #0
-		.endm
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
index d548a622e7d..3c4cd31ad9f 100644
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -9,42 +9,4 @@
 
 #include <plat/gpio.h>
 
-#define __GPIO_RESOURCE(soc, block)					\
-	{								\
-		.start	= soc##_GPIOBANK##block##_BASE,			\
-		.end	= soc##_GPIOBANK##block##_BASE + 127,		\
-		.flags	= IORESOURCE_MEM,				\
-	},								\
-	{								\
-		.start	= IRQ_GPIO##block,				\
-		.end	= IRQ_GPIO##block,				\
-		.flags	= IORESOURCE_IRQ,				\
-	}
-
-#define __GPIO_DEVICE(soc, block)					\
-	{								\
-		.name		= "gpio",				\
-		.id		= block,				\
-		.num_resources	= 2,					\
-		.resource	= &soc##_gpio_resources[block * 2],	\
-		.dev = {						\
-			.platform_data = &soc##_gpio_data[block],	\
-		},							\
-	}
-
-#define GPIO_DATA(_name, first)						\
-	{								\
-		.name		= _name,				\
-		.first_gpio	= first,				\
-		.first_irq	= NOMADIK_GPIO_TO_IRQ(first),		\
-	}
-
-#ifdef CONFIG_UX500_SOC_DB8500
-#define GPIO_RESOURCE(block)	__GPIO_RESOURCE(U8500, block)
-#define GPIO_DEVICE(block)	__GPIO_DEVICE(u8500, block)
-#elif defined(CONFIG_UX500_SOC_DB5500)
-#define GPIO_RESOURCE(block)	__GPIO_RESOURCE(U5500, block)
-#define GPIO_DEVICE(block)	__GPIO_DEVICE(u5500, block)
-#endif
-
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 32e883a8f2a..6295cc58135 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -142,6 +142,8 @@ static inline bool cpu_is_u5500(void)
 #endif
 }
 
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
 #endif
 
 #endif				/* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
index cca4f705601..7cdeb2af0eb 100644
--- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
+++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h
@@ -8,12 +8,36 @@
 #ifndef __MACH_IRQS_BOARD_MOP500_H
 #define __MACH_IRQS_BOARD_MOP500_H
 
-#define AB8500_NR_IRQS			104
+/* Number of AB8500 irqs is taken from header file */
+#include <linux/mfd/ab8500.h>
 
 #define MOP500_AB8500_IRQ_BASE		IRQ_BOARD_START
 #define MOP500_AB8500_IRQ_END		(MOP500_AB8500_IRQ_BASE \
 					 + AB8500_NR_IRQS)
-#define MOP500_IRQ_END			MOP500_AB8500_IRQ_END
+
+/* TC35892 */
+#define TC35892_NR_INTERNAL_IRQS	8
+#define TC35892_INT_GPIO(x)		(TC35892_NR_INTERNAL_IRQS + (x))
+#define TC35892_NR_GPIOS		24
+#define TC35892_NR_IRQS			TC35892_INT_GPIO(TC35892_NR_GPIOS)
+
+#define MOP500_EGPIO_NR_IRQS		TC35892_NR_IRQS
+
+#define MOP500_EGPIO_IRQ_BASE		MOP500_AB8500_IRQ_END
+#define MOP500_EGPIO_IRQ_END		(MOP500_EGPIO_IRQ_BASE \
+					 + MOP500_EGPIO_NR_IRQS)
+/* STMPE1601 irqs */
+#define STMPE_NR_INTERNAL_IRQS          9
+#define STMPE_INT_GPIO(x)               (STMPE_NR_INTERNAL_IRQS + (x))
+#define STMPE_NR_GPIOS                  24
+#define STMPE_NR_IRQS                   STMPE_INT_GPIO(STMPE_NR_GPIOS)
+
+#define MOP500_STMPE1601_IRQBASE        MOP500_EGPIO_IRQ_END
+#define MOP500_STMPE1601_IRQ(x)         (MOP500_STMPE1601_IRQBASE + (x))
+
+#define MOP500_NR_IRQS          MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS)
+
+#define MOP500_IRQ_END          MOP500_NR_IRQS
 
 #if MOP500_IRQ_END > IRQ_BOARD_END
 #undef IRQ_BOARD_END
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 693aa57de88..880ae45bc23 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -21,50 +21,6 @@
 
 /* Interrupt numbers generic for shared peripheral */
 #define IRQ_MTU0		(IRQ_SHPI_START + 4)
-#define IRQ_SPI2		(IRQ_SHPI_START + 6)
-#define IRQ_SPI0		(IRQ_SHPI_START + 8)
-#define IRQ_UART0		(IRQ_SHPI_START + 11)
-#define IRQ_I2C3		(IRQ_SHPI_START + 12)
-#define IRQ_SSP0		(IRQ_SHPI_START + 14)
-#define IRQ_MTU1		(IRQ_SHPI_START + 17)
-#define IRQ_RTC_RTT		(IRQ_SHPI_START + 18)
-#define IRQ_UART1		(IRQ_SHPI_START + 19)
-#define IRQ_I2C0		(IRQ_SHPI_START + 21)
-#define IRQ_I2C1		(IRQ_SHPI_START + 22)
-#define IRQ_USBOTG		(IRQ_SHPI_START + 23)
-#define IRQ_DMA			(IRQ_SHPI_START + 25)
-#define IRQ_UART2		(IRQ_SHPI_START + 26)
-#define IRQ_HSIR_EXCEP		(IRQ_SHPI_START + 29)
-#define IRQ_MSP0		(IRQ_SHPI_START + 31)
-#define IRQ_HSIR_CH0_OVRRUN	(IRQ_SHPI_START + 32)
-#define IRQ_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
-#define IRQ_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
-#define IRQ_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
-#define IRQ_AB8500		(IRQ_SHPI_START + 40)
-#define IRQ_PRCMU               (IRQ_SHPI_START + 47)
-#define IRQ_DISP		(IRQ_SHPI_START + 48)
-#define IRQ_SiPI3		(IRQ_SHPI_START + 49)
-#define IRQ_I2C4		(IRQ_SHPI_START + 51)
-#define IRQ_SSP1		(IRQ_SHPI_START + 52)
-#define IRQ_I2C2		(IRQ_SHPI_START + 55)
-#define IRQ_SDMMC0		(IRQ_SHPI_START + 60)
-#define IRQ_MSP1		(IRQ_SHPI_START + 62)
-#define IRQ_SPI1		(IRQ_SHPI_START + 96)
-#define IRQ_MSP2		(IRQ_SHPI_START + 98)
-#define IRQ_SDMMC4		(IRQ_SHPI_START + 99)
-#define IRQ_HSIRD0		(IRQ_SHPI_START + 104)
-#define IRQ_HSIRD1		(IRQ_SHPI_START + 105)
-#define IRQ_HSITD0		(IRQ_SHPI_START + 106)
-#define IRQ_HSITD1		(IRQ_SHPI_START + 107)
-#define IRQ_GPIO0		(IRQ_SHPI_START + 119)
-#define IRQ_GPIO1		(IRQ_SHPI_START + 120)
-#define IRQ_GPIO2		(IRQ_SHPI_START + 121)
-#define IRQ_GPIO3		(IRQ_SHPI_START + 122)
-#define IRQ_GPIO4		(IRQ_SHPI_START + 123)
-#define IRQ_GPIO5		(IRQ_SHPI_START + 124)
-#define IRQ_GPIO6		(IRQ_SHPI_START + 125)
-#define IRQ_GPIO7		(IRQ_SHPI_START + 126)
-#define IRQ_GPIO8		(IRQ_SHPI_START + 127)
 
 /* There are 128 shared peripheral interrupts assigned to
  * INTID[160:32]. The first 32 interrupts are reserved.
diff --git a/arch/arm/mach-ux500/include/mach/mbox.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h
index 7f9da4d2fbd..7f9da4d2fbd 100644
--- a/arch/arm/mach-ux500/include/mach/mbox.h
+++ b/arch/arm/mach-ux500/include/mach/mbox-db5500.h
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-defs.h b/arch/arm/mach-ux500/include/mach/prcmu-defs.h
new file mode 100644
index 00000000000..848ba64b561
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/prcmu-defs.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCM Unit definitions
+ */
+
+#ifndef __MACH_PRCMU_DEFS_H
+#define __MACH_PRCMU_DEFS_H
+
+enum prcmu_cpu_opp {
+	CPU_OPP_INIT	  = 0x00,
+	CPU_OPP_NO_CHANGE = 0x01,
+	CPU_OPP_100	  = 0x02,
+	CPU_OPP_50	  = 0x03,
+	CPU_OPP_MAX	  = 0x04,
+	CPU_OPP_EXT_CLK	  = 0x07
+};
+enum prcmu_ape_opp {
+	APE_OPP_NO_CHANGE = 0x00,
+	APE_OPP_100	  = 0x02,
+	APE_OPP_50	  = 0x03,
+};
+
+#endif /* __MACH_PRCMU_DEFS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
index 8885f39a642..455467e8879 100644
--- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h
+++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
@@ -1,10 +1,15 @@
 /*
- * Copyright (c) 2009 ST-Ericsson SA
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCM Unit registers
  */
+
 #ifndef __MACH_PRCMU_REGS_H
 #define __MACH_PRCMU_REGS_H
 
@@ -88,4 +93,4 @@
 /* Miscellaneous unit registers */
 #define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
 
-#endif /* __MACH_PRCMU__REGS_H */
+#endif /* __MACH_PRCMU_REGS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h
index 549843ff6db..c49e456162e 100644
--- a/arch/arm/mach-ux500/include/mach/prcmu.h
+++ b/arch/arm/mach-ux500/include/mach/prcmu.h
@@ -2,14 +2,27 @@
  * Copyright (C) STMicroelectronics 2009
  * Copyright (C) ST-Ericsson SA 2010
  *
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
+ *
  * License Terms: GNU General Public License v2
  *
- * PRCMU f/w APIs
+ * PRCM Unit f/w API
  */
 #ifndef __MACH_PRCMU_H
 #define __MACH_PRCMU_H
+#include <mach/prcmu-defs.h>
 
+void __init prcmu_early_init(void);
 int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
 int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_set_ape_opp(enum prcmu_ape_opp opp);
+int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp);
+int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
+			   enum prcmu_cpu_opp cpu_opp);
+int prcmu_get_ape_opp(void);
+int prcmu_get_cpu_opp(void);
+bool prcmu_has_arm_maxopp(void);
 
 #endif /* __MACH_PRCMU_H */
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 54bbe648bf5..469877e0de9 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -18,14 +18,19 @@ extern void __init ux500_map_io(void);
 extern void __init u5500_map_io(void);
 extern void __init u8500_map_io(void);
 
-extern void __init ux500_init_devices(void);
 extern void __init u5500_init_devices(void);
 extern void __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
+
+extern void __init u5500_sdi_init(void);
+
+extern void __init db5500_dma_init(void);
+
 /* We re-use nomadik_timer for this platform */
 extern void nmdk_timer_init(void);
 
+struct amba_device;
 extern void __init amba_add_devices(struct amba_device *devs[], int num);
 
 struct sys_timer;
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
index 197e8417375..ca2b15b1b3b 100644
--- a/arch/arm/mach-ux500/include/mach/smp.h
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -10,7 +10,6 @@
 #define ASMARM_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /* This is required to wakeup the secondary core */
 extern void u8500_secondary_startup(void);
@@ -18,8 +17,8 @@ extern void u8500_secondary_startup(void);
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 #endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 0271ca0a83d..9a6614c6808 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -19,38 +19,43 @@
 #define __ASM_ARCH_UNCOMPRESS_H
 
 #include <asm/setup.h>
+#include <asm/mach-types.h>
 #include <linux/io.h>
+#include <linux/amba/serial.h>
 #include <mach/hardware.h>
 
-#define U8500_UART_DR		0x80007000
-#define U8500_UART_LCRH		0x8000702c
-#define U8500_UART_CR		0x80007030
-#define U8500_UART_FR		0x80007018
+static u32 ux500_uart_base;
 
 static void putc(const char c)
 {
 	/* Do nothing if the UART is not enabled. */
-	if (!(__raw_readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1))
 		return;
 
 	if (c == '\n')
 		putc('\r');
 
-	while (__raw_readb(U8500_UART_FR) & (1 << 5))
+	while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 5))
 		barrier();
-	__raw_writeb(c, U8500_UART_DR);
+	__raw_writeb(c, ux500_uart_base + UART01x_DR);
 }
 
 static void flush(void)
 {
-	if (!(__raw_readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1))
 		return;
-	while (__raw_readb(U8500_UART_FR) & (1 << 3))
+	while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 3))
 		barrier();
 }
 
 static inline void arch_decomp_setup(void)
 {
+	if (machine_is_u8500())
+		ux500_uart_base = U8500_UART2_BASE;
+	else if (machine_is_u5500())
+		ux500_uart_base = U5500_UART0_BASE;
+	else /* not much can be done to help here */
+		ux500_uart_base = U8500_UART2_BASE;
 }
 
 #define arch_decomp_wdog() /* nothing to do here */
diff --git a/arch/arm/mach-ux500/mbox.c b/arch/arm/mach-ux500/mbox-db5500.c
index 63435389c54..cbf15718fc3 100644
--- a/arch/arm/mach-ux500/mbox.c
+++ b/arch/arm/mach-ux500/mbox-db5500.c
@@ -38,7 +38,7 @@
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 #include <linux/completion.h>
-#include <mach/mbox.h>
+#include <mach/mbox-db5500.h>
 
 #define MBOX_NAME "mbox"
 
diff --git a/arch/arm/mach-ux500/modem_irq.c b/arch/arm/mach-ux500/modem-irq-db5500.c
index 3187f887116..3187f887116 100644
--- a/arch/arm/mach-ux500/modem_irq.c
+++ b/arch/arm/mach-ux500/modem-irq-db5500.c
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 9e4c678de78..d77e76cb7ed 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -18,7 +18,6 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
 
@@ -26,31 +25,37 @@
  * control for which core is the next to come out of the secondary
  * boot "holding pen"
  */
-volatile int __cpuinitdata pen_release = -1;
+volatile int pen_release = -1;
 
-static unsigned int __init get_core_count(void)
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
 {
-	return scu_get_core_count(__io_address(UX500_SCU_BASE));
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
 }
 
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
+	gic_secondary_init(0);
 
 	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
-	pen_release = -1;
+	write_pen_release(-1);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -74,11 +79,9 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * the holding pen - release it, then wait for it to flag
 	 * that it has been released by resetting pen_release.
 	 */
-	pen_release = cpu;
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release) + 1);
+	write_pen_release(cpu);
 
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -97,9 +100,6 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 static void __init wakeup_secondary(void)
 {
-	/* nobody is to be released from the pen yet */
-	pen_release = -1;
-
 	/*
 	 * write the address of secondary startup into the backup ram register
 	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
@@ -126,40 +126,26 @@ static void __init wakeup_secondary(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores = get_core_count();
+	unsigned int i, ncores;
 
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	unsigned int ncores = get_core_count();
-	unsigned int cpu = smp_processor_id();
-	int i;
+	ncores = scu_get_core_count(__io_address(UX500_SCU_BASE));
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "U8500: strange CM count of 0? Default to 1\n");
-		ncores = 1;
-	}
-
-	if (ncores > num_possible_cpus())	{
+	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "U8500: no. of cores (%d) greater than configured "
 		       "maximum of %d - clipping\n",
-		       ncores, num_possible_cpus());
-		ncores = num_possible_cpus();
+		       ncores, NR_CPUS);
+		ncores = NR_CPUS;
 	}
 
-	smp_store_cpu_info(cpu);
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
 
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int i;
 
 	/*
 	 * Initialise the present map, which describes the set of CPUs
@@ -168,13 +154,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-		scu_enable(__io_address(UX500_SCU_BASE));
-		wakeup_secondary();
-	}
+	scu_enable(__io_address(UX500_SCU_BASE));
+	wakeup_secondary();
 }
diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c
index 293274d1342..c522d26ef34 100644
--- a/arch/arm/mach-ux500/prcmu.c
+++ b/arch/arm/mach-ux500/prcmu.c
@@ -1,10 +1,14 @@
 /*
- * Copyright (C) ST Ericsson SA 2010
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
  *
  * License Terms: GNU General Public License v2
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
  * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
  *
- * U8500 PRCMU driver.
+ * U8500 PRCM Unit interface driver
+ *
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -19,11 +23,26 @@
 
 #include <mach/hardware.h>
 #include <mach/prcmu-regs.h>
+#include <mach/prcmu-defs.h>
+
+/* Global var to runtime determine TCDM base for v2 or v1 */
+static __iomem void *tcdm_base;
+
+#define _MBOX_HEADER		(tcdm_base + 0xFE8)
+#define MBOX_HEADER_REQ_MB0	(_MBOX_HEADER + 0x0)
+
+#define REQ_MB1 (tcdm_base + 0xFD0)
+#define REQ_MB5 (tcdm_base + 0xE44)
 
-#define PRCMU_TCDM_BASE __io_address(U8500_PRCMU_TCDM_BASE)
+#define REQ_MB1_ARMOPP		(REQ_MB1 + 0x0)
+#define REQ_MB1_APEOPP		(REQ_MB1 + 0x1)
+#define REQ_MB1_BOOSTOPP	(REQ_MB1 + 0x2)
 
-#define REQ_MB5 (PRCMU_TCDM_BASE + 0xE44)
-#define ACK_MB5 (PRCMU_TCDM_BASE + 0xDF4)
+#define ACK_MB1 (tcdm_base + 0xE04)
+#define ACK_MB5 (tcdm_base + 0xDF4)
+
+#define ACK_MB1_CURR_ARMOPP		(ACK_MB1 + 0x0)
+#define ACK_MB1_CURR_APEOPP		(ACK_MB1 + 0x1)
 
 #define REQ_MB5_I2C_SLAVE_OP (REQ_MB5)
 #define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1)
@@ -33,10 +52,33 @@
 #define ACK_MB5_I2C_STATUS (ACK_MB5 + 1)
 #define ACK_MB5_I2C_VAL (ACK_MB5 + 3)
 
-#define I2C_WRITE(slave) ((slave) << 1)
-#define I2C_READ(slave) (((slave) << 1) | BIT(0))
+#define PRCM_AVS_VARM_MAX_OPP		(tcdm_base + 0x2E4)
+#define PRCM_AVS_ISMODEENABLE		7
+#define PRCM_AVS_ISMODEENABLE_MASK	(1 << PRCM_AVS_ISMODEENABLE)
+
+#define I2C_WRITE(slave) \
+	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define I2C_READ(slave) \
+	(((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0))
 #define I2C_STOP_EN BIT(3)
 
+enum mb1_h {
+	MB1H_ARM_OPP = 1,
+	MB1H_APE_OPP,
+	MB1H_ARM_APE_OPP,
+};
+
+static struct {
+	struct mutex lock;
+	struct completion work;
+	struct {
+		u8 arm_opp;
+		u8 ape_opp;
+		u8 arm_status;
+		u8 ape_status;
+	} ack;
+} mb1_transfer;
+
 enum ack_mb5_status {
 	I2C_WR_OK = 0x01,
 	I2C_RD_OK = 0x02,
@@ -145,6 +187,104 @@ unlock_and_return:
 }
 EXPORT_SYMBOL(prcmu_abb_write);
 
+static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp,
+			    enum prcmu_cpu_opp cpu_opp)
+{
+	bool do_ape;
+	bool do_arm;
+	int err = 0;
+
+	do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP));
+	do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP));
+
+	mutex_lock(&mb1_transfer.lock);
+
+	while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
+		cpu_relax();
+
+	writeb(0, MBOX_HEADER_REQ_MB0);
+	writeb(cpu_opp, REQ_MB1_ARMOPP);
+	writeb(ape_opp, REQ_MB1_APEOPP);
+	writeb(0, REQ_MB1_BOOSTOPP);
+	writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
+	wait_for_completion(&mb1_transfer.work);
+	if ((do_ape) && (mb1_transfer.ack.ape_status != 0))
+		err = -EIO;
+	if ((do_arm) && (mb1_transfer.ack.arm_status != 0))
+		err = -EIO;
+
+	mutex_unlock(&mb1_transfer.lock);
+
+	return err;
+}
+
+/**
+ * prcmu_set_ape_opp() - Set the OPP of the APE.
+ * @opp:	The OPP to set.
+ *
+ * This function sets the OPP of the APE.
+ */
+int prcmu_set_ape_opp(enum prcmu_ape_opp opp)
+{
+	return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE);
+}
+EXPORT_SYMBOL(prcmu_set_ape_opp);
+
+/**
+ * prcmu_set_cpu_opp() - Set the OPP of the CPU.
+ * @opp:	The OPP to set.
+ *
+ * This function sets the OPP of the CPU.
+ */
+int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp)
+{
+	return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp);
+}
+EXPORT_SYMBOL(prcmu_set_cpu_opp);
+
+/**
+ * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU.
+ * @ape_opp:	The APE OPP to set.
+ * @cpu_opp:	The CPU OPP to set.
+ *
+ * This function sets the OPPs of the APE and the CPU.
+ */
+int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
+			   enum prcmu_cpu_opp cpu_opp)
+{
+	return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp);
+}
+EXPORT_SYMBOL(prcmu_set_ape_cpu_opps);
+
+/**
+ * prcmu_get_ape_opp() - Get the OPP of the APE.
+ *
+ * This function gets the OPP of the APE.
+ */
+enum prcmu_ape_opp prcmu_get_ape_opp(void)
+{
+	return readb(ACK_MB1_CURR_APEOPP);
+}
+EXPORT_SYMBOL(prcmu_get_ape_opp);
+
+/**
+ * prcmu_get_cpu_opp() - Get the OPP of the CPU.
+ *
+ * This function gets the OPP of the CPU. The OPP is specified in %%.
+ * PRCMU_OPP_EXT is a special OPP value, not specified in %%.
+ */
+int prcmu_get_cpu_opp(void)
+{
+	return readb(ACK_MB1_CURR_ARMOPP);
+}
+EXPORT_SYMBOL(prcmu_get_cpu_opp);
+
+bool prcmu_has_arm_maxopp(void)
+{
+	return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK)
+		== PRCM_AVS_ISMODEENABLE_MASK;
+}
+
 static void read_mailbox_0(void)
 {
 	writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
@@ -152,6 +292,9 @@ static void read_mailbox_0(void)
 
 static void read_mailbox_1(void)
 {
+	mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP);
+	mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP);
+	complete(&mb1_transfer.work);
 	writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
 }
 
@@ -217,15 +360,35 @@ static irqreturn_t prcmu_irq_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+void __init prcmu_early_init(void)
+{
+	if (cpu_is_u8500v11() || cpu_is_u8500ed()) {
+		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1);
+	} else if (cpu_is_u8500v2()) {
+		tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
+	} else {
+		pr_err("prcmu: Unsupported chip version\n");
+		BUG();
+	}
+}
+
 static int __init prcmu_init(void)
 {
+	if (cpu_is_u8500ed()) {
+		pr_err("prcmu: Unsupported chip version\n");
+		return 0;
+	}
+
+	mutex_init(&mb1_transfer.lock);
+	init_completion(&mb1_transfer.work);
 	mutex_init(&mb5_transfer.lock);
 	init_completion(&mb5_transfer.work);
 
 	/* Clean up the mailbox interrupts after pre-kernel code. */
 	writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR);
 
-	return request_irq(IRQ_PRCMU, prcmu_irq_handler, 0, "prcmu", NULL);
+	return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0,
+			   "prcmu", NULL);
 }
 
 arch_initcall(prcmu_init);
diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig
index c781f30c836..3f7b5e9d83c 100644
--- a/arch/arm/mach-versatile/Kconfig
+++ b/arch/arm/mach-versatile/Kconfig
@@ -4,6 +4,7 @@ menu "Versatile platform type"
 config ARCH_VERSATILE_PB
 	bool "Support Versatile/PB platform"
 	select CPU_ARM926T
+	select MIGHT_HAVE_PCI
 	default y
 	help
 	  Include support for the ARM(R) Versatile/PB platform.
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index e38acb0f89c..13a83e45a33 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -31,8 +31,8 @@
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
 #include <linux/gfp.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -46,10 +46,11 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/clkdev.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <plat/timer-sp.h>
+#include <asm/hardware/timer-sp.h>
+
+#include <plat/sched_clock.h>
 
 #include "core.h"
 
@@ -886,6 +887,12 @@ void __init versatile_init(void)
 }
 
 /*
+ * The sched_clock counter
+ */
+#define REFCOUNTER		(__io_address(VERSATILE_SYS_BASE) + \
+				 VERSATILE_SYS_24MHz_OFFSET)
+
+/*
  * Where is the timer (VA)?
  */
 #define TIMER0_VA_BASE		 __io_address(VERSATILE_TIMER0_1_BASE)
@@ -900,6 +907,8 @@ static void __init versatile_timer_init(void)
 {
 	u32 val;
 
+	versatile_sched_clock_init(REFCOUNTER, 24000000);
+
 	/* 
 	 * set clock frequency: 
 	 *	VERSATILE_REFCLK is 32KHz
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
index ebd8a2543d3..7d8e069ad51 100644
--- a/arch/arm/mach-versatile/include/mach/vmalloc.h
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -18,4 +18,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#define VMALLOC_END		0xd8000000
+#define VMALLOC_END		0xd8000000UL
diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile
index 1b71b77ade2..2c0ac7de281 100644
--- a/arch/arm/mach-vexpress/Makefile
+++ b/arch/arm/mach-vexpress/Makefile
@@ -5,4 +5,5 @@
 obj-y					:= v2m.o
 obj-$(CONFIG_ARCH_VEXPRESS_CA9X4)	+= ct-ca9x4.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
+obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS)		+= localtimer.o
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index 57dd95ce41f..362780d868d 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -22,5 +22,3 @@ struct map_desc;
 
 void v2m_map_io(struct map_desc *tile, size_t num);
 extern struct sys_timer v2m_timer;
-
-extern void __iomem *gic_cpu_base_addr;
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index c2e405a9e02..e628402b754 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -8,8 +8,8 @@
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
 #include <asm/pgtable.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -18,10 +18,9 @@
 #include <asm/pmu.h>
 #include <asm/smp_twd.h>
 
-#include <mach/clkdev.h>
 #include <mach/ct-ca9x4.h>
 
-#include <plat/timer-sp.h>
+#include <asm/hardware/timer-sp.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -54,17 +53,16 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = {
 
 static void __init ct_ca9x4_map_io(void)
 {
+#ifdef CONFIG_LOCAL_TIMERS
 	twd_base = MMIO_P2V(A9_MPCORE_TWD);
+#endif
 	v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
 }
 
-void __iomem *gic_cpu_base_addr;
-
 static void __init ct_ca9x4_init_irq(void)
 {
-	gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU);
-	gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29);
-	gic_cpu_init(0, gic_cpu_base_addr);
+	gic_init(0, 29, MMIO_P2V(A9_MPCORE_GIC_DIST),
+		 MMIO_P2V(A9_MPCORE_GIC_CPU));
 }
 
 #if 0
diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S
index 8a78ff68e1e..7a3f0632947 100644
--- a/arch/arm/mach-vexpress/headsmp.S
+++ b/arch/arm/mach-vexpress/headsmp.S
@@ -35,5 +35,6 @@ pen:	ldr	r7, [r6]
 	 */
 	b	secondary_startup
 
+	.align
 1:	.long	.
 	.long	pen_release
diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c
new file mode 100644
index 00000000000..ea4cbfb90a6
--- /dev/null
+++ b/arch/arm/mach-vexpress/hotplug.c
@@ -0,0 +1,128 @@
+/*
+ *  linux/arch/arm/mach-realview/hotplug.c
+ *
+ *  Copyright (C) 2002 ARM Ltd.
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/smp.h>
+
+#include <asm/cacheflush.h>
+
+extern volatile int pen_release;
+
+static inline void cpu_enter_lowpower(void)
+{
+	unsigned int v;
+
+	flush_cache_all();
+	asm volatile(
+		"mcr	p15, 0, %1, c7, c5, 0\n"
+	"	mcr	p15, 0, %1, c7, c10, 4\n"
+	/*
+	 * Turn off coherency
+	 */
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	bic	%0, %0, %3\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	"	mrc	p15, 0, %0, c1, c0, 0\n"
+	"	bic	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	  : "=&r" (v)
+	  : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+	unsigned int v;
+
+	asm volatile(
+		"mrc	p15, 0, %0, c1, c0, 0\n"
+	"	orr	%0, %0, %1\n"
+	"	mcr	p15, 0, %0, c1, c0, 0\n"
+	"	mrc	p15, 0, %0, c1, c0, 1\n"
+	"	orr	%0, %0, %2\n"
+	"	mcr	p15, 0, %0, c1, c0, 1\n"
+	  : "=&r" (v)
+	  : "Ir" (CR_C), "Ir" (0x40)
+	  : "cc");
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+	/*
+	 * there is no power-control hardware on this platform, so all
+	 * we can do is put the core into WFI; this is safe as the calling
+	 * code will have already disabled interrupts
+	 */
+	for (;;) {
+		/*
+		 * here's the WFI
+		 */
+		asm(".word	0xe320f003\n"
+		    :
+		    :
+		    : "memory", "cc");
+
+		if (pen_release == cpu) {
+			/*
+			 * OK, proper wakeup, we're done
+			 */
+			break;
+		}
+
+		/*
+		 * Getting here, means that we have come out of WFI without
+		 * having been woken up - this shouldn't happen
+		 *
+		 * Just note it happening - when we're woken, we can report
+		 * its occurrence.
+		 */
+		(*spurious)++;
+	}
+}
+
+int platform_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+void platform_cpu_die(unsigned int cpu)
+{
+	int spurious = 0;
+
+	/*
+	 * we're ready for shutdown now, so do it
+	 */
+	cpu_enter_lowpower();
+	platform_do_lowpower(cpu, &spurious);
+
+	/*
+	 * bring this CPU back into the world of cache
+	 * coherency, and then restore interrupts
+	 */
+	cpu_leave_lowpower();
+
+	if (spurious)
+		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+
+int platform_cpu_disable(unsigned int cpu)
+{
+	/*
+	 * we don't allow CPU 0 to be shutdown (it is still too special
+	 * e.g. clock tick interrupts)
+	 */
+	return cpu == 0 ? -EPERM : 0;
+}
diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S
index 20e9fb514f0..73c11297509 100644
--- a/arch/arm/mach-vexpress/include/mach/entry-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S
@@ -1,67 +1,7 @@
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
 
 	.macro	disable_fiq
 	.endm
 
-	.macro	get_irqnr_preamble, base, tmp
-	ldr	\base, =gic_cpu_base_addr
-	ldr	\base, [\base]
-	.endm
-
 	.macro	arch_ret_to_user, tmp1, tmp2
 	.endm
-
-	/*
-	 * The interrupt numbering scheme is defined in the
-	 * interrupt controller spec.  To wit:
-	 *
-	 * Interrupts 0-15 are IPI
-	 * 16-28 are reserved
-	 * 29-31 are local.  We allow 30 to be used for the watchdog.
-	 * 32-1020 are global
-	 * 1021-1022 are reserved
-	 * 1023 is "spurious" (no interrupt)
-	 *
-	 * For now, we ignore all local interrupts so only return an interrupt if it's
-	 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
-	 *
-	 * A simple read from the controller will tell us the number of the highest
-	 * priority enabled interrupt.  We then just need to check whether it is in the
-	 * valid range for an IRQ (30-1020 inclusive).
-	 */
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
-	ldr	\tmp, =1021
-	bic     \irqnr, \irqstat, #0x1c00
-	cmp     \irqnr, #29
-	cmpcc	\irqnr, \irqnr
-	cmpne	\irqnr, \tmp
-	cmpcs	\irqnr, \irqnr
-	.endm
-
-	/* We assume that irqstat (the raw value of the IRQ acknowledge
-	 * register) is preserved from the macro above.
-	 * If there is an IPI, we immediately signal end of interrupt on the
-	 * controller, since this requires the original irqstat value which
-	 * we won't easily be able to recreate later.
-	 */
-
-	.macro test_for_ipi, irqnr, irqstat, base, tmp
-	bic	\irqnr, \irqstat, #0x1c00
-	cmp	\irqnr, #16
-	strcc	\irqstat, [\base, #GIC_CPU_EOI]
-	cmpcs	\irqnr, \irqnr
-	.endm
-
-	/* As above, this assumes that irqstat and base are preserved.. */
-
-	.macro test_for_ltirq, irqnr, irqstat, base, tmp
-	bic	\irqnr, \irqstat, #0x1c00
-	mov 	\tmp, #0
-	cmp	\irqnr, #29
-	moveq	\tmp, #1
-	streq	\irqstat, [\base, #GIC_CPU_EOI]
-	cmp	\tmp, #0
-	.endm
-
diff --git a/arch/arm/mach-vexpress/include/mach/smp.h b/arch/arm/mach-vexpress/include/mach/smp.h
index 5a6da4fd247..4c05e4a9713 100644
--- a/arch/arm/mach-vexpress/include/mach/smp.h
+++ b/arch/arm/mach-vexpress/include/mach/smp.h
@@ -2,13 +2,12 @@
 #define __MACH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /*
  * We use IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 #endif
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 670970699ba..b1687b6abe6 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -17,7 +17,6 @@
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
-#include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <asm/unified.h>
 
@@ -35,6 +34,19 @@ extern void vexpress_secondary_startup(void);
  */
 volatile int __cpuinitdata pen_release = -1;
 
+/*
+ * Write pen_release in a way that is guaranteed to be visible to all
+ * observers, irrespective of whether they're taking part in coherency
+ * or not.  This is necessary for the hotplug code to work reliably.
+ */
+static void write_pen_release(int val)
+{
+	pen_release = val;
+	smp_wmb();
+	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
+	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+}
+
 static void __iomem *scu_base_addr(void)
 {
 	return MMIO_P2V(A9_MPCORE_SCU);
@@ -44,21 +56,18 @@ static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
-	trace_hardirqs_off();
-
 	/*
 	 * if any interrupts are already enabled for the primary
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(0, gic_cpu_base_addr);
+	gic_secondary_init(0);
 
 	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
-	pen_release = -1;
-	smp_wmb();
+	write_pen_release(-1);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -83,16 +92,14 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * since we haven't sent them a soft interrupt, they shouldn't
 	 * be there.
 	 */
-	pen_release = cpu;
-	__cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release));
-	outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1));
+	write_pen_release(cpu);
 
 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 */
-	smp_cross_call(cpumask_of(cpu));
+	smp_cross_call(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -124,13 +131,6 @@ void __init smp_init_cpus(void)
 	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
 
 	/* sanity check */
-	if (ncores == 0) {
-		printk(KERN_ERR
-		       "vexpress: strange CM count of 0? Default to 1\n");
-
-		ncores = 1;
-	}
-
 	if (ncores > NR_CPUS) {
 		printk(KERN_WARNING
 		       "vexpress: no. of cores (%d) greater than configured "
@@ -143,20 +143,10 @@ void __init smp_init_cpus(void)
 		set_cpu_possible(i, true);
 }
 
-void __init smp_prepare_cpus(unsigned int max_cpus)
+void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	unsigned int ncores = num_possible_cpus();
-	unsigned int cpu = smp_processor_id();
 	int i;
 
-	smp_store_cpu_info(cpu);
-
-	/*
-	 * are we trying to boot more cores than exist?
-	 */
-	if (max_cpus > ncores)
-		max_cpus = ncores;
-
 	/*
 	 * Initialise the present map, which describes the set of CPUs
 	 * actually populated at the present time.
@@ -164,27 +154,15 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	for (i = 0; i < max_cpus; i++)
 		set_cpu_present(i, true);
 
+	scu_enable(scu_base_addr());
+
 	/*
-	 * Initialise the SCU if there are more than one CPU and let
-	 * them know where to start.
+	 * Write the address of secondary startup into the
+	 * system-wide flags register. The boot monitor waits
+	 * until it receives a soft interrupt, and then the
+	 * secondary CPU branches to this address.
 	 */
-	if (max_cpus > 1) {
-		/*
-		 * Enable the local timer or broadcast device for the
-		 * boot CPU, but only if we have more than one CPU.
-		 */
-		percpu_timer_setup();
-
-		scu_enable(scu_base_addr());
-
-		/*
-		 * Write the address of secondary startup into the
-		 * system-wide flags register. The boot monitor waits
-		 * until it receives a soft interrupt, and then the
-		 * secondary CPU branches to this address.
-		 */
-		writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
-		writel(BSYM(virt_to_phys(vexpress_secondary_startup)),
-			MMIO_P2V(V2M_SYS_FLAGSSET));
-	}
+	writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR));
+	writel(BSYM(virt_to_phys(vexpress_secondary_startup)),
+		MMIO_P2V(V2M_SYS_FLAGSSET));
 }
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 7eaa232180a..a9ed3428a2f 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -11,18 +11,18 @@
 #include <linux/spinlock.h>
 #include <linux/sysdev.h>
 #include <linux/usb/isp1760.h>
+#include <linux/clkdev.h>
 
-#include <asm/clkdev.h>
 #include <asm/sizes.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
 
-#include <mach/clkdev.h>
 #include <mach/motherboard.h>
 
-#include <plat/timer-sp.h>
+#include <plat/sched_clock.h>
 
 #include "core.h"
 
@@ -50,6 +50,8 @@ void __init v2m_map_io(struct map_desc *tile, size_t num)
 
 static void __init v2m_timer_init(void)
 {
+	versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
+
 	writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL);
 	writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL);
 
diff --git a/arch/arm/mach-w90x900/clock.h b/arch/arm/mach-w90x900/clock.h
index c56ddab3d91..b88a1b16b2e 100644
--- a/arch/arm/mach-w90x900/clock.h
+++ b/arch/arm/mach-w90x900/clock.h
@@ -10,7 +10,7 @@
  * the Free Software Foundation; either version 2 of the License.
  */
 
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 void nuc900_clk_enable(struct clk *clk, int enable);
 void nuc900_subclk_enable(struct clk *clk, int enable);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index b80f769bc13..4b089cb930d 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -153,7 +153,6 @@ static struct clocksource clocksource_nuc900 = {
 	.rating	= 200,
 	.read	= nuc900_get_cycles,
 	.mask	= CLOCKSOURCE_MASK(TDR_SHIFT),
-	.shift	= 10,
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -176,9 +175,7 @@ static void __init nuc900_clocksource_init(void)
 	val |= (COUNTEN | PERIOD | PRESCALE);
 	__raw_writel(val, REG_TCSR1);
 
-	clocksource_nuc900.mult =
-		clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift);
-	clocksource_register(&clocksource_nuc900);
+	clocksource_register_hz(&clocksource_nuc900, rate);
 }
 
 static void __init nuc900_timer_init(void)
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 4414a01e1e8..fcc1e628e05 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -382,6 +382,12 @@ config CPU_FEROCEON_OLD_ID
 	  for which the CPU ID is equal to the ARM926 ID.
 	  Relevant for Feroceon-1850 and early Feroceon-2850.
 
+# Marvell PJ4
+config CPU_PJ4
+	bool
+	select CPU_V7
+	select ARM_THUMBEE
+
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
@@ -599,6 +605,14 @@ config CPU_CP15_MPU
 	help
 	  Processor has the CP15 register, which has MPU related registers.
 
+config CPU_USE_DOMAINS
+	bool
+	depends on MMU
+	default y if !CPU_32v6K
+	help
+	  This option enables or disables the use of domain switching
+	  via the set_fs() function.
+
 #
 # CPU supports 36-bit I/O
 #
@@ -628,6 +642,33 @@ config ARM_THUMBEE
 	  Say Y here if you have a CPU with the ThumbEE extension and code to
 	  make use of it. Say N for code that can run on CPUs without ThumbEE.
 
+config SWP_EMULATE
+	bool "Emulate SWP/SWPB instructions"
+	depends on CPU_V7
+	select HAVE_PROC_CPU if PROC_FS
+	default y if SMP
+	help
+	  ARMv6 architecture deprecates use of the SWP/SWPB instructions.
+	  ARMv7 multiprocessing extensions introduce the ability to disable
+	  these instructions, triggering an undefined instruction exception
+	  when executed. Say Y here to enable software emulation of these
+	  instructions for userspace (not kernel) using LDREX/STREX.
+	  Also creates /proc/cpu/swp_emulation for statistics.
+
+	  In some older versions of glibc [<=2.8] SWP is used during futex
+	  trylock() operations with the assumption that the code will not
+	  be preempted. This invalid assumption may be more likely to fail
+	  with SWP emulation enabled, leading to deadlock of the user
+	  application.
+
+	  NOTE: when accessing uncached shared regions, LDREX/STREX rely
+	  on an external transaction monitoring block called a global
+	  monitor to maintain update atomicity. If your system does not
+	  implement a global monitor, this option can cause programs that
+	  perform SWP operations to uncached memory to deadlock.
+
+	  If unsure, say Y.
+
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
 	depends on ARCH_SUPPORTS_BIG_ENDIAN
@@ -772,7 +813,7 @@ config CACHE_L2X0
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
 		   REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || \
 		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_S5PV310 || ARCH_TEGRA || \
-		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4
+		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
 	default y
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
@@ -789,7 +830,7 @@ config CACHE_PL310
 
 config CACHE_TAUROS2
 	bool "Enable the Tauros2 L2 cache controller"
-	depends on (ARCH_DOVE || ARCH_MMP)
+	depends on (ARCH_DOVE || ARCH_MMP || CPU_PJ4)
 	default y
 	select OUTER_CACHE
 	help
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index d63b6c41375..00d74a04af3 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -5,8 +5,8 @@
 obj-y				:= dma-mapping.o extable.o fault.o init.o \
 				   iomap.o
 
-obj-$(CONFIG_MMU)		+= fault-armv.o flush.o ioremap.o mmap.o \
-				   pgd.o mmu.o vmregion.o
+obj-$(CONFIG_MMU)		+= fault-armv.o flush.o idmap.o ioremap.o \
+				   mmap.o pgd.o mmu.o vmregion.o
 
 ifneq ($(CONFIG_MMU),y)
 obj-y				+= nommu.o
diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c
index 6e77c042d8e..e0b0e7a4ec6 100644
--- a/arch/arm/mm/cache-feroceon-l2.c
+++ b/arch/arm/mm/cache-feroceon-l2.c
@@ -13,13 +13,9 @@
  */
 
 #include <linux/init.h>
+#include <linux/highmem.h>
 #include <asm/cacheflush.h>
-#include <asm/kmap_types.h>
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
 #include <plat/cache-feroceon-l2.h>
-#include "mm.h"
 
 /*
  * Low-level cache maintenance operations.
@@ -39,27 +35,30 @@
  * between which we don't want to be preempted.
  */
 
-static inline unsigned long l2_start_va(unsigned long paddr)
+static inline unsigned long l2_get_va(unsigned long paddr)
 {
 #ifdef CONFIG_HIGHMEM
 	/*
-	 * Let's do our own fixmap stuff in a minimal way here.
 	 * Because range ops can't be done on physical addresses,
 	 * we simply install a virtual mapping for it only for the
 	 * TLB lookup to occur, hence no need to flush the untouched
-	 * memory mapping.  This is protected with the disabling of
-	 * interrupts by the caller.
+	 * memory mapping afterwards (note: a cache flush may happen
+	 * in some circumstances depending on the path taken in kunmap_atomic).
 	 */
-	unsigned long idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
-	unsigned long vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	set_pte_ext(TOP_PTE(vaddr), pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL), 0);
-	local_flush_tlb_kernel_page(vaddr);
-	return vaddr + (paddr & ~PAGE_MASK);
+	void *vaddr = kmap_atomic_pfn(paddr >> PAGE_SHIFT);
+	return (unsigned long)vaddr + (paddr & ~PAGE_MASK);
 #else
 	return __phys_to_virt(paddr);
 #endif
 }
 
+static inline void l2_put_va(unsigned long vaddr)
+{
+#ifdef CONFIG_HIGHMEM
+	kunmap_atomic((void *)vaddr);
+#endif
+}
+
 static inline void l2_clean_pa(unsigned long addr)
 {
 	__asm__("mcr p15, 1, %0, c15, c9, 3" : : "r" (addr));
@@ -76,13 +75,14 @@ static inline void l2_clean_pa_range(unsigned long start, unsigned long end)
 	 */
 	BUG_ON((start ^ end) >> PAGE_SHIFT);
 
-	raw_local_irq_save(flags);
-	va_start = l2_start_va(start);
+	va_start = l2_get_va(start);
 	va_end = va_start + (end - start);
+	raw_local_irq_save(flags);
 	__asm__("mcr p15, 1, %0, c15, c9, 4\n\t"
 		"mcr p15, 1, %1, c15, c9, 5"
 		: : "r" (va_start), "r" (va_end));
 	raw_local_irq_restore(flags);
+	l2_put_va(va_start);
 }
 
 static inline void l2_clean_inv_pa(unsigned long addr)
@@ -106,13 +106,14 @@ static inline void l2_inv_pa_range(unsigned long start, unsigned long end)
 	 */
 	BUG_ON((start ^ end) >> PAGE_SHIFT);
 
-	raw_local_irq_save(flags);
-	va_start = l2_start_va(start);
+	va_start = l2_get_va(start);
 	va_end = va_start + (end - start);
+	raw_local_irq_save(flags);
 	__asm__("mcr p15, 1, %0, c15, c11, 4\n\t"
 		"mcr p15, 1, %1, c15, c11, 5"
 		: : "r" (va_start), "r" (va_end));
 	raw_local_irq_restore(flags);
+	l2_put_va(va_start);
 }
 
 static inline void l2_inv_all(void)
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 99fa688dfad..c96fa1b3f49 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -203,6 +203,10 @@ ENTRY(v6_flush_kern_dcache_area)
  *	- end     - virtual end address of region
  */
 v6_dma_inv_range:
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrb	r2, [r0]			@ read for ownership
+	strb	r2, [r0]			@ write for ownership
+#endif
 	tst	r0, #D_CACHE_LINE_SIZE - 1
 	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
@@ -211,6 +215,10 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r0, c7, c11, 1		@ clean unified line
 #endif
 	tst	r1, #D_CACHE_LINE_SIZE - 1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrneb	r2, [r1, #-1]			@ read for ownership
+	strneb	r2, [r1, #-1]			@ write for ownership
+#endif
 	bic	r1, r1, #D_CACHE_LINE_SIZE - 1
 #ifdef HARVARD_CACHE
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D line
@@ -218,10 +226,6 @@ v6_dma_inv_range:
 	mcrne	p15, 0, r1, c7, c15, 1		@ clean & invalidate unified line
 #endif
 1:
-#ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-	str	r2, [r0]			@ write for ownership
-#endif
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D line
 #else
@@ -229,6 +233,10 @@ v6_dma_inv_range:
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrlo	r2, [r0]			@ read for ownership
+	strlo	r2, [r0]			@ write for ownership
+#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
@@ -263,12 +271,12 @@ v6_dma_clean_range:
  *	- end     - virtual end address of region
  */
 ENTRY(v6_dma_flush_range)
-	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
-1:
 #ifdef CONFIG_DMA_CACHE_RWFO
-	ldr	r2, [r0]			@ read for ownership
-	str	r2, [r0]			@ write for ownership
+	ldrb	r2, [r0]		@ read for ownership
+	strb	r2, [r0]		@ write for ownership
 #endif
+	bic	r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 #else
@@ -276,6 +284,10 @@ ENTRY(v6_dma_flush_range)
 #endif
 	add	r0, r0, #D_CACHE_LINE_SIZE
 	cmp	r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+	ldrlob	r2, [r0]			@ read for ownership
+	strlob	r2, [r0]			@ write for ownership
+#endif
 	blo	1b
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index a3ebf7a4f49..6136e68ce95 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -173,15 +173,22 @@ ENTRY(v7_coherent_user_range)
  UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
-	bic	r0, r0, r3
+	bic	r12, r0, r3
 1:
- USER(	mcr	p15, 0, r0, c7, c11, 1	)	@ clean D line to the point of unification
+ USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	1b
 	dsb
- USER(	mcr	p15, 0, r0, c7, c5, 1	)	@ invalidate I line
-	add	r0, r0, r2
+	icache_line_size r2, r3
+	sub	r3, r2, #1
+	bic	r12, r0, r3
 2:
-	cmp	r0, r1
-	blo	1b
+ USER(	mcr	p15, 0, r12, c7, c5, 1	)	@ invalidate I line
+	add	r12, r12, r2
+	cmp	r12, r1
+	blo	2b
+3:
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 6)	@ invalidate BTB Inner Shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 6)	@ invalidate BTB
@@ -194,10 +201,10 @@ ENTRY(v7_coherent_user_range)
  * isn't mapped, just try the next page.
  */
 9001:
-	mov	r0, r0, lsr #12
-	mov	r0, r0, lsl #12
-	add	r0, r0, #4096
-	b	2b
+	mov	r12, r12, lsr #12
+	mov	r12, r12, lsl #12
+	add	r12, r12, #4096
+	b	3b
  UNWIND(.fnend		)
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index c3154928bcc..5a32020471e 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -17,14 +17,10 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 #include <linux/init.h>
+#include <linux/highmem.h>
 #include <asm/system.h>
 #include <asm/cputype.h>
 #include <asm/cacheflush.h>
-#include <asm/kmap_types.h>
-#include <asm/fixmap.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include "mm.h"
 
 #define CR_L2	(1 << 26)
 
@@ -71,16 +67,15 @@ static inline void xsc3_l2_inv_all(void)
 	dsb();
 }
 
+static inline void l2_unmap_va(unsigned long va)
+{
 #ifdef CONFIG_HIGHMEM
-#define l2_map_save_flags(x)		raw_local_save_flags(x)
-#define l2_map_restore_flags(x)		raw_local_irq_restore(x)
-#else
-#define l2_map_save_flags(x)		((x) = 0)
-#define l2_map_restore_flags(x)		((void)(x))
+	if (va != -1)
+		kunmap_atomic((void *)va);
 #endif
+}
 
-static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
-				      unsigned long flags)
+static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va)
 {
 #ifdef CONFIG_HIGHMEM
 	unsigned long va = prev_va & PAGE_MASK;
@@ -89,17 +84,10 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
 		/*
 		 * Switching to a new page.  Because cache ops are
 		 * using virtual addresses only, we must put a mapping
-		 * in place for it.  We also enable interrupts for a
-		 * short while and disable them again to protect this
-		 * mapping.
+		 * in place for it.
 		 */
-		unsigned long idx;
-		raw_local_irq_restore(flags);
-		idx = KM_L2_CACHE + KM_TYPE_NR * smp_processor_id();
-		va = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-		raw_local_irq_restore(flags | PSR_I_BIT);
-		set_pte_ext(TOP_PTE(va), pfn_pte(pa >> PAGE_SHIFT, PAGE_KERNEL), 0);
-		local_flush_tlb_kernel_page(va);
+		l2_unmap_va(prev_va);
+		va = (unsigned long)kmap_atomic_pfn(pa >> PAGE_SHIFT);
 	}
 	return va + (pa_offset >> (32 - PAGE_SHIFT));
 #else
@@ -109,7 +97,7 @@ static inline unsigned long l2_map_va(unsigned long pa, unsigned long prev_va,
 
 static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 {
-	unsigned long vaddr, flags;
+	unsigned long vaddr;
 
 	if (start == 0 && end == -1ul) {
 		xsc3_l2_inv_all();
@@ -117,13 +105,12 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 	}
 
 	vaddr = -1;  /* to force the first mapping */
-	l2_map_save_flags(flags);
 
 	/*
 	 * Clean and invalidate partial first cache line.
 	 */
 	if (start & (CACHE_LINE_SIZE - 1)) {
-		vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr, flags);
+		vaddr = l2_map_va(start & ~(CACHE_LINE_SIZE - 1), vaddr);
 		xsc3_l2_clean_mva(vaddr);
 		xsc3_l2_inv_mva(vaddr);
 		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
@@ -133,7 +120,7 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 	 * Invalidate all full cache lines between 'start' and 'end'.
 	 */
 	while (start < (end & ~(CACHE_LINE_SIZE - 1))) {
-		vaddr = l2_map_va(start, vaddr, flags);
+		vaddr = l2_map_va(start, vaddr);
 		xsc3_l2_inv_mva(vaddr);
 		start += CACHE_LINE_SIZE;
 	}
@@ -142,31 +129,30 @@ static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
 	 * Clean and invalidate partial last cache line.
 	 */
 	if (start < end) {
-		vaddr = l2_map_va(start, vaddr, flags);
+		vaddr = l2_map_va(start, vaddr);
 		xsc3_l2_clean_mva(vaddr);
 		xsc3_l2_inv_mva(vaddr);
 	}
 
-	l2_map_restore_flags(flags);
+	l2_unmap_va(vaddr);
 
 	dsb();
 }
 
 static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
 {
-	unsigned long vaddr, flags;
+	unsigned long vaddr;
 
 	vaddr = -1;  /* to force the first mapping */
-	l2_map_save_flags(flags);
 
 	start &= ~(CACHE_LINE_SIZE - 1);
 	while (start < end) {
-		vaddr = l2_map_va(start, vaddr, flags);
+		vaddr = l2_map_va(start, vaddr);
 		xsc3_l2_clean_mva(vaddr);
 		start += CACHE_LINE_SIZE;
 	}
 
-	l2_map_restore_flags(flags);
+	l2_unmap_va(vaddr);
 
 	dsb();
 }
@@ -193,7 +179,7 @@ static inline void xsc3_l2_flush_all(void)
 
 static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
 {
-	unsigned long vaddr, flags;
+	unsigned long vaddr;
 
 	if (start == 0 && end == -1ul) {
 		xsc3_l2_flush_all();
@@ -201,17 +187,16 @@ static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
 	}
 
 	vaddr = -1;  /* to force the first mapping */
-	l2_map_save_flags(flags);
 
 	start &= ~(CACHE_LINE_SIZE - 1);
 	while (start < end) {
-		vaddr = l2_map_va(start, vaddr, flags);
+		vaddr = l2_map_va(start, vaddr);
 		xsc3_l2_clean_mva(vaddr);
 		xsc3_l2_inv_mva(vaddr);
 		start += CACHE_LINE_SIZE;
 	}
 
-	l2_map_restore_flags(flags);
+	l2_unmap_va(vaddr);
 
 	dsb();
 }
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index e4dd0646e85..6b48e0a3d7a 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/highmem.h>
 
 #include <asm/memory.h>
 #include <asm/highmem.h>
@@ -198,7 +199,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 	 * fragmentation of the DMA space, and also prevents allocations
 	 * smaller than a section from crossing a section boundary.
 	 */
-	bit = fls(size - 1) + 1;
+	bit = fls(size - 1);
 	if (bit > SECTION_SHIFT)
 		bit = SECTION_SHIFT;
 	align = 1 << bit;
@@ -311,7 +312,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 		addr = page_address(page);
 
 	if (addr)
-		*handle = page_to_dma(dev, page);
+		*handle = pfn_to_dma(dev, page_to_pfn(page));
 
 	return addr;
 }
@@ -406,7 +407,7 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 	if (!arch_is_coherent())
 		__dma_free_remap(cpu_addr, size);
 
-	__dma_free_buffer(dma_to_page(dev, handle), size);
+	__dma_free_buffer(pfn_to_page(dma_to_pfn(dev, handle)), size);
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
@@ -480,10 +481,10 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 				op(vaddr, len, dir);
 				kunmap_high(page);
 			} else if (cache_is_vipt()) {
-				pte_t saved_pte;
-				vaddr = kmap_high_l1_vipt(page, &saved_pte);
+				/* unmapped pages might still be cached */
+				vaddr = kmap_atomic(page);
 				op(vaddr + offset, len, dir);
-				kunmap_high_l1_vipt(page, saved_pte);
+				kunmap_atomic(vaddr);
 			}
 		} else {
 			vaddr = page_address(page) + offset;
@@ -554,17 +555,20 @@ int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
 	struct scatterlist *s;
 	int i, j;
 
+	BUG_ON(!valid_dma_direction(dir));
+
 	for_each_sg(sg, s, nents, i) {
-		s->dma_address = dma_map_page(dev, sg_page(s), s->offset,
+		s->dma_address = __dma_map_page(dev, sg_page(s), s->offset,
 						s->length, dir);
 		if (dma_mapping_error(dev, s->dma_address))
 			goto bad_mapping;
 	}
+	debug_dma_map_sg(dev, sg, nents, nents, dir);
 	return nents;
 
  bad_mapping:
 	for_each_sg(sg, s, i, j)
-		dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
+		__dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
 	return 0;
 }
 EXPORT_SYMBOL(dma_map_sg);
@@ -585,8 +589,10 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
 	struct scatterlist *s;
 	int i;
 
+	debug_dma_unmap_sg(dev, sg, nents, dir);
+
 	for_each_sg(sg, s, nents, i)
-		dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
+		__dma_unmap_page(dev, sg_dma_address(s), sg_dma_len(s), dir);
 }
 EXPORT_SYMBOL(dma_unmap_sg);
 
@@ -611,6 +617,8 @@ void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
 		__dma_page_dev_to_cpu(sg_page(s), s->offset,
 				      s->length, dir);
 	}
+
+	debug_dma_sync_sg_for_cpu(dev, sg, nents, dir);
 }
 EXPORT_SYMBOL(dma_sync_sg_for_cpu);
 
@@ -635,5 +643,16 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 		__dma_page_cpu_to_dev(sg_page(s), s->offset,
 				      s->length, dir);
 	}
+
+	debug_dma_sync_sg_for_device(dev, sg, nents, dir);
 }
 EXPORT_SYMBOL(dma_sync_sg_for_device);
+
+#define PREALLOC_DMA_DEBUG_ENTRIES	4096
+
+static int __init dma_debug_do_init(void)
+{
+	dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+	return 0;
+}
+fs_initcall(dma_debug_do_init);
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index 83e59f87042..01210dba022 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -26,7 +26,7 @@
 
 #include "mm.h"
 
-static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
+static pteval_t shared_pte_mask = L_PTE_MT_BUFFERABLE;
 
 #if __LINUX_ARM_ARCH__ < 6
 /*
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 1e21e125fe3..f10f9bac220 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -108,7 +108,7 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 
 		pte = pte_offset_map(pmd, addr);
 		printk(", *pte=%08lx", pte_val(*pte));
-		printk(", *ppte=%08lx", pte_val(pte[-PTRS_PER_PTE]));
+		printk(", *ppte=%08lx", pte_val(pte[PTE_HWTABLE_PTRS]));
 		pte_unmap(pte);
 	} while(0);
 
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 391ffae7509..c29f2839f1d 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/pagemap.h>
+#include <linux/highmem.h>
 
 #include <asm/cacheflush.h>
 #include <asm/cachetype.h>
@@ -180,10 +181,10 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 			__cpuc_flush_dcache_area(addr, PAGE_SIZE);
 			kunmap_high(page);
 		} else if (cache_is_vipt()) {
-			pte_t saved_pte;
-			addr = kmap_high_l1_vipt(page, &saved_pte);
+			/* unmapped pages might still be cached */
+			addr = kmap_atomic(page);
 			__cpuc_flush_dcache_area(addr, PAGE_SIZE);
-			kunmap_high_l1_vipt(page, saved_pte);
+			kunmap_atomic(addr);
 		}
 	}
 
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index c435fd9e1da..807c0573abb 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -140,90 +140,3 @@ struct page *kmap_atomic_to_page(const void *ptr)
 	pte = TOP_PTE(vaddr);
 	return pte_page(*pte);
 }
-
-#ifdef CONFIG_CPU_CACHE_VIPT
-
-#include <linux/percpu.h>
-
-/*
- * The VIVT cache of a highmem page is always flushed before the page
- * is unmapped. Hence unmapped highmem pages need no cache maintenance
- * in that case.
- *
- * However unmapped pages may still be cached with a VIPT cache, and
- * it is not possible to perform cache maintenance on them using physical
- * addresses unfortunately.  So we have no choice but to set up a temporary
- * virtual mapping for that purpose.
- *
- * Yet this VIPT cache maintenance may be triggered from DMA support
- * functions which are possibly called from interrupt context. As we don't
- * want to keep interrupt disabled all the time when such maintenance is
- * taking place, we therefore allow for some reentrancy by preserving and
- * restoring the previous fixmap entry before the interrupted context is
- * resumed.  If the reentrancy depth is 0 then there is no need to restore
- * the previous fixmap, and leaving the current one in place allow it to
- * be reused the next time without a TLB flush (common with DMA).
- */
-
-static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth);
-
-void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
-{
-	unsigned int idx, cpu;
-	int *depth;
-	unsigned long vaddr, flags;
-	pte_t pte, *ptep;
-
-	if (!in_interrupt())
-		preempt_disable();
-
-	cpu = smp_processor_id();
-	depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
-
-	idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	ptep = TOP_PTE(vaddr);
-	pte = mk_pte(page, kmap_prot);
-
-	raw_local_irq_save(flags);
-	(*depth)++;
-	if (pte_val(*ptep) == pte_val(pte)) {
-		*saved_pte = pte;
-	} else {
-		*saved_pte = *ptep;
-		set_pte_ext(ptep, pte, 0);
-		local_flush_tlb_kernel_page(vaddr);
-	}
-	raw_local_irq_restore(flags);
-
-	return (void *)vaddr;
-}
-
-void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte)
-{
-	unsigned int idx, cpu = smp_processor_id();
-	int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
-	unsigned long vaddr, flags;
-	pte_t pte, *ptep;
-
-	idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
-	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
-	ptep = TOP_PTE(vaddr);
-	pte = mk_pte(page, kmap_prot);
-
-	BUG_ON(pte_val(*ptep) != pte_val(pte));
-	BUG_ON(*depth <= 0);
-
-	raw_local_irq_save(flags);
-	(*depth)--;
-	if (*depth != 0 && pte_val(pte) != pte_val(saved_pte)) {
-		set_pte_ext(ptep, saved_pte, 0);
-		local_flush_tlb_kernel_page(vaddr);
-	}
-	raw_local_irq_restore(flags);
-
-	if (!in_interrupt())
-		preempt_enable();
-}
-
-#endif  /* CONFIG_CPU_CACHE_VIPT */
diff --git a/arch/arm/mm/idmap.c b/arch/arm/mm/idmap.c
new file mode 100644
index 00000000000..57299446f78
--- /dev/null
+++ b/arch/arm/mm/idmap.c
@@ -0,0 +1,67 @@
+#include <linux/kernel.h>
+
+#include <asm/cputype.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+
+static void idmap_add_pmd(pgd_t *pgd, unsigned long addr, unsigned long end,
+	unsigned long prot)
+{
+	pmd_t *pmd = pmd_offset(pgd, addr);
+
+	addr = (addr & PMD_MASK) | prot;
+	pmd[0] = __pmd(addr);
+	addr += SECTION_SIZE;
+	pmd[1] = __pmd(addr);
+	flush_pmd_entry(pmd);
+}
+
+void identity_mapping_add(pgd_t *pgd, unsigned long addr, unsigned long end)
+{
+	unsigned long prot, next;
+
+	prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE;
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
+		prot |= PMD_BIT4;
+
+	pgd += pgd_index(addr);
+	do {
+		next = pgd_addr_end(addr, end);
+		idmap_add_pmd(pgd, addr, next, prot);
+	} while (pgd++, addr = next, addr != end);
+}
+
+#ifdef CONFIG_SMP
+static void idmap_del_pmd(pgd_t *pgd, unsigned long addr, unsigned long end)
+{
+	pmd_t *pmd = pmd_offset(pgd, addr);
+	pmd_clear(pmd);
+}
+
+void identity_mapping_del(pgd_t *pgd, unsigned long addr, unsigned long end)
+{
+	unsigned long next;
+
+	pgd += pgd_index(addr);
+	do {
+		next = pgd_addr_end(addr, end);
+		idmap_del_pmd(pgd, addr, next);
+	} while (pgd++, addr = next, addr != end);
+}
+#endif
+
+/*
+ * In order to soft-boot, we need to insert a 1:1 mapping in place of
+ * the user-mode pages.  This will then ensure that we have predictable
+ * results when turning the mmu off
+ */
+void setup_mm_for_reboot(char mode)
+{
+	/*
+	 * We need to access to user-mode page tables here. For kernel threads
+	 * we don't have any user-mode mappings so we use the context that we
+	 * "borrowed".
+	 */
+	identity_mapping_add(current->active_mm->pgd, 0, TASK_SIZE);
+	local_flush_tlb_all();
+}
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 17e7b0b57e4..ab506272b2d 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -204,12 +204,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn,
 	/*
 	 * Don't allow RAM to be mapped - this causes problems with ARMv6+
 	 */
-	if (pfn_valid(pfn)) {
-		printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory.  This leads\n"
-		       KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n"
-		       KERN_WARNING "will fail in the next kernel release.  Please fix your driver.\n");
-		WARN_ON(1);
-	}
+	if (WARN_ON(pfn_valid(pfn)))
+		return NULL;
 
 	type = get_mem_type(mtype);
 	if (!type)
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index 6630620380a..36960df5fb7 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -16,7 +16,7 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
 }
 
 struct mem_type {
-	unsigned int prot_pte;
+	pteval_t prot_pte;
 	unsigned int prot_l1;
 	unsigned int prot_sect;
 	unsigned int domain;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 72ad3e1f56c..3c67e92f7d5 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -24,6 +24,7 @@
 #include <asm/smp_plat.h>
 #include <asm/tlb.h>
 #include <asm/highmem.h>
+#include <asm/traps.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -62,7 +63,7 @@ struct cachepolicy {
 	const char	policy[16];
 	unsigned int	cr_mask;
 	unsigned int	pmd;
-	unsigned int	pte;
+	pteval_t	pte;
 };
 
 static struct cachepolicy cache_policies[] __initdata = {
@@ -190,7 +191,7 @@ void adjust_cr(unsigned long mask, unsigned long set)
 }
 #endif
 
-#define PROT_PTE_DEVICE		L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_WRITE
+#define PROT_PTE_DEVICE		L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN
 #define PROT_SECT_DEVICE	PMD_TYPE_SECT|PMD_SECT_AP_WRITE
 
 static struct mem_type mem_types[] = {
@@ -235,19 +236,18 @@ static struct mem_type mem_types[] = {
 	},
 	[MT_LOW_VECTORS] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_EXEC,
+				L_PTE_RDONLY,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.domain    = DOMAIN_USER,
 	},
 	[MT_HIGH_VECTORS] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_USER | L_PTE_EXEC,
+				L_PTE_USER | L_PTE_RDONLY,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.domain    = DOMAIN_USER,
 	},
 	[MT_MEMORY] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_WRITE | L_PTE_EXEC,
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
@@ -258,21 +258,20 @@ static struct mem_type mem_types[] = {
 	},
 	[MT_MEMORY_NONCACHED] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE,
+				L_PTE_MT_BUFFERABLE,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_MEMORY_DTCM] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_WRITE,
+				L_PTE_XN,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_MEMORY_ITCM] = {
-		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_WRITE | L_PTE_EXEC,
+		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.domain    = DOMAIN_KERNEL,
 	},
@@ -479,7 +478,7 @@ static void __init build_mem_type_table(void)
 
 	pgprot_user   = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
 	pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
-				 L_PTE_DIRTY | L_PTE_WRITE | kern_pgprot);
+				 L_PTE_DIRTY | kern_pgprot);
 
 	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
@@ -535,7 +534,7 @@ static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned l
 {
 	if (pmd_none(*pmd)) {
 		pte_t *pte = early_alloc(2 * PTRS_PER_PTE * sizeof(pte_t));
-		__pmd_populate(pmd, __pa(pte) | prot);
+		__pmd_populate(pmd, __pa(pte), prot);
 	}
 	BUG_ON(pmd_bad(*pmd));
 	return pte_offset_kernel(pmd, addr);
@@ -553,7 +552,7 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 }
 
 static void __init alloc_init_section(pgd_t *pgd, unsigned long addr,
-				      unsigned long end, unsigned long phys,
+				      unsigned long end, phys_addr_t phys,
 				      const struct mem_type *type)
 {
 	pmd_t *pmd = pmd_offset(pgd, addr);
@@ -588,7 +587,8 @@ static void __init alloc_init_section(pgd_t *pgd, unsigned long addr,
 static void __init create_36bit_mapping(struct map_desc *md,
 					const struct mem_type *type)
 {
-	unsigned long phys, addr, length, end;
+	unsigned long addr, length, end;
+	phys_addr_t phys;
 	pgd_t *pgd;
 
 	addr = md->virtual;
@@ -914,12 +914,11 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 {
 	struct map_desc map;
 	unsigned long addr;
-	void *vectors;
 
 	/*
 	 * Allocate the vector page early.
 	 */
-	vectors = early_alloc(PAGE_SIZE);
+	vectors_page = early_alloc(PAGE_SIZE);
 
 	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
 		pmd_clear(pmd_off_k(addr));
@@ -959,7 +958,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc)
 	 * location (0xffff0000).  If we aren't using high-vectors, also
 	 * create a mapping at the low-vectors virtual address.
 	 */
-	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+	map.pfn = __phys_to_pfn(virt_to_phys(vectors_page));
 	map.virtual = 0xffff0000;
 	map.length = PAGE_SIZE;
 	map.type = MT_HIGH_VECTORS;
@@ -1044,38 +1043,3 @@ void __init paging_init(struct machine_desc *mdesc)
 	empty_zero_page = virt_to_page(zero_page);
 	__flush_dcache_page(NULL, empty_zero_page);
 }
-
-/*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages.  This will then ensure that we have predictable
- * results when turning the mmu off
- */
-void setup_mm_for_reboot(char mode)
-{
-	unsigned long base_pmdval;
-	pgd_t *pgd;
-	int i;
-
-	/*
-	 * We need to access to user-mode page tables here. For kernel threads
-	 * we don't have any user-mode mappings so we use the context that we
-	 * "borrowed".
-	 */
-	pgd = current->active_mm->pgd;
-
-	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
-		base_pmdval |= PMD_BIT4;
-
-	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
-		unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
-		pmd_t *pmd;
-
-		pmd = pmd_off(pgd, i << PGDIR_SHIFT);
-		pmd[0] = __pmd(pmdval);
-		pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
-		flush_pmd_entry(pmd);
-	}
-
-	local_flush_tlb_all();
-}
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index 69bbfc6645a..93292a18cf7 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -17,12 +17,10 @@
 
 #include "mm.h"
 
-#define FIRST_KERNEL_PGD_NR	(FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
-
 /*
  * need to get a 16k page for level 1
  */
-pgd_t *get_pgd_slow(struct mm_struct *mm)
+pgd_t *pgd_alloc(struct mm_struct *mm)
 {
 	pgd_t *new_pgd, *init_pgd;
 	pmd_t *new_pmd, *init_pmd;
@@ -32,14 +30,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 	if (!new_pgd)
 		goto no_pgd;
 
-	memset(new_pgd, 0, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
+	memset(new_pgd, 0, USER_PTRS_PER_PGD * sizeof(pgd_t));
 
 	/*
 	 * Copy over the kernel and IO PGD entries
 	 */
 	init_pgd = pgd_offset_k(0);
-	memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
-		       (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
+	memcpy(new_pgd + USER_PTRS_PER_PGD, init_pgd + USER_PTRS_PER_PGD,
+		       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
 
 	clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
 
@@ -73,28 +71,29 @@ no_pgd:
 	return NULL;
 }
 
-void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
+void pgd_free(struct mm_struct *mm, pgd_t *pgd_base)
 {
+	pgd_t *pgd;
 	pmd_t *pmd;
 	pgtable_t pte;
 
-	if (!pgd)
+	if (!pgd_base)
 		return;
 
-	/* pgd is always present and good */
-	pmd = pmd_off(pgd, 0);
-	if (pmd_none(*pmd))
-		goto free;
-	if (pmd_bad(*pmd)) {
-		pmd_ERROR(*pmd);
-		pmd_clear(pmd);
-		goto free;
-	}
+	pgd = pgd_base + pgd_index(0);
+	if (pgd_none_or_clear_bad(pgd))
+		goto no_pgd;
+
+	pmd = pmd_offset(pgd, 0);
+	if (pmd_none_or_clear_bad(pmd))
+		goto no_pmd;
 
 	pte = pmd_pgtable(*pmd);
 	pmd_clear(pmd);
 	pte_free(mm, pte);
+no_pmd:
+	pgd_clear(pgd);
 	pmd_free(mm, pmd);
-free:
-	free_pages((unsigned long) pgd, 2);
+no_pgd:
+	free_pages((unsigned long) pgd_base, 2);
 }
diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S
index 7d63beaf974..e32fa499194 100644
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@@ -61,17 +61,27 @@
 	.endm
 
 /*
- * cache_line_size - get the cache line size from the CSIDR register
- * (available on ARMv7+). It assumes that the CSSR register was configured
- * to access the L1 data cache CSIDR.
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
  */
 	.macro	dcache_line_size, reg, tmp
-	mrc	p15, 1, \tmp, c0, c0, 0		@ read CSIDR
-	and	\tmp, \tmp, #7			@ cache line size encoding
-	mov	\reg, #16			@ size offset
+	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+	lsr	\tmp, \tmp, #16
+	and	\tmp, \tmp, #0xf		@ cache line size encoding
+	mov	\reg, #4			@ bytes per word
 	mov	\reg, \reg, lsl \tmp		@ actual cache line size
 	.endm
 
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register
+ * on ARMv7.
+ */
+	.macro	icache_line_size, reg, tmp
+	mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+	and	\tmp, \tmp, #0xf		@ cache line size encoding
+	mov	\reg, #4			@ bytes per word
+	mov	\reg, \reg, lsl \tmp		@ actual cache line size
+	.endm
 
 /*
  * Sanity check the PTE configuration for the code below - which makes
@@ -81,7 +91,7 @@
 #if L_PTE_SHARED != PTE_EXT_SHARED
 #error PTE shared bit mismatch
 #endif
-#if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
+#if (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
      L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
 #error Invalid Linux PTE bit settings
 #endif
@@ -99,6 +109,10 @@
  *  110x   0   1   0	r/w	r/o
  *  11x0   0   1   0	r/w	r/o
  *  1111   0   1   1	r/w	r/w
+ *
+ * If !CONFIG_CPU_USE_DOMAINS, the following permissions are changed:
+ *  110x   1   1   1	r/o	r/o
+ *  11x0   1   1   1	r/o	r/o
  */
 	.macro	armv6_mt_table pfx
 \pfx\()_mt_table:
@@ -121,7 +135,7 @@
 	.endm
 
 	.macro	armv6_set_pte_ext pfx
-	str	r1, [r0], #-2048		@ linux version
+	str	r1, [r0], #2048			@ linux version
 
 	bic	r3, r1, #0x000003fc
 	bic	r3, r3, #PTE_TYPE_MASK
@@ -132,17 +146,20 @@
 	and	r2, r1, #L_PTE_MT_MASK
 	ldr	r2, [ip, r2]
 
-	tst	r1, #L_PTE_WRITE
-	tstne	r1, #L_PTE_DIRTY
-	orreq	r3, r3, #PTE_EXT_APX
+	eor	r1, r1, #L_PTE_DIRTY
+	tst	r1, #L_PTE_DIRTY|L_PTE_RDONLY
+	orrne	r3, r3, #PTE_EXT_APX
 
 	tst	r1, #L_PTE_USER
 	orrne	r3, r3, #PTE_EXT_AP1
+#ifdef CONFIG_CPU_USE_DOMAINS
+	@ allow kernel read/write access to read-only user pages
 	tstne	r3, #PTE_EXT_APX
 	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+#endif
 
-	tst	r1, #L_PTE_EXEC
-	orreq	r3, r3, #PTE_EXT_XN
+	tst	r1, #L_PTE_XN
+	orrne	r3, r3, #PTE_EXT_XN
 
 	orr	r3, r3, r2
 
@@ -170,9 +187,9 @@
  *  1111  0xff	r/w	r/w
  */
 	.macro	armv3_set_pte_ext wc_disable=1
-	str	r1, [r0], #-2048		@ linux version
+	str	r1, [r0], #2048			@ linux version
 
-	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
 
 	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
 	bic	r2, r2, #PTE_TYPE_MASK
@@ -181,7 +198,7 @@
 	tst	r3, #L_PTE_USER			@ user?
 	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
 
-	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ write and dirty?
+	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
 	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
 
 	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
@@ -193,7 +210,7 @@
 	bicne	r2, r2, #PTE_BUFFERABLE
 #endif
 	.endif
-	str	r2, [r0]			@ hardware version
+	str	r2, [r0]		@ hardware version
 	.endm
 
 
@@ -213,9 +230,9 @@
  *  1111  11	r/w	r/w
  */
 	.macro	xscale_set_pte_ext_prologue
-	str	r1, [r0], #-2048		@ linux version
+	str	r1, [r0]			@ linux version
 
-	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY
 
 	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
 	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
@@ -223,7 +240,7 @@
 	tst	r3, #L_PTE_USER			@ user?
 	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
 
-	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ write and dirty?
+	tst	r3, #L_PTE_RDONLY | L_PTE_DIRTY	@ write and dirty?
 	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
 						@ combined with user -> user r/w
 	.endm
@@ -232,7 +249,7 @@
 	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
 	movne	r2, #0				@ no -> fault
 
-	str	r2, [r0]			@ hardware version
+	str	r2, [r0, #2048]!		@ hardware version
 	mov	ip, #0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
 	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 53cbe222515..b49fab21517 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -124,15 +124,13 @@ ENDPROC(cpu_v7_switch_mm)
  *	Set a level 2 translation table entry.
  *
  *	- ptep  - pointer to level 2 translation table entry
- *		  (hardware version is stored at -1024 bytes)
+ *		  (hardware version is stored at +2048 bytes)
  *	- pte   - PTE value to store
  *	- ext	- value for extended PTE bits
  */
 ENTRY(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
- ARM(	str	r1, [r0], #-2048	)	@ linux version
- THUMB(	str	r1, [r0]		)	@ linux version
- THUMB(	sub	r0, r0, #2048		)
+	str	r1, [r0]			@ linux version
 
 	bic	r3, r1, #0x000003f0
 	bic	r3, r3, #PTE_TYPE_MASK
@@ -142,23 +140,26 @@ ENTRY(cpu_v7_set_pte_ext)
 	tst	r1, #1 << 4
 	orrne	r3, r3, #PTE_EXT_TEX(1)
 
-	tst	r1, #L_PTE_WRITE
-	tstne	r1, #L_PTE_DIRTY
-	orreq	r3, r3, #PTE_EXT_APX
+	eor	r1, r1, #L_PTE_DIRTY
+	tst	r1, #L_PTE_RDONLY | L_PTE_DIRTY
+	orrne	r3, r3, #PTE_EXT_APX
 
 	tst	r1, #L_PTE_USER
 	orrne	r3, r3, #PTE_EXT_AP1
+#ifdef CONFIG_CPU_USE_DOMAINS
+	@ allow kernel read/write access to read-only user pages
 	tstne	r3, #PTE_EXT_APX
 	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+#endif
 
-	tst	r1, #L_PTE_EXEC
-	orreq	r3, r3, #PTE_EXT_XN
+	tst	r1, #L_PTE_XN
+	orrne	r3, r3, #PTE_EXT_XN
 
 	tst	r1, #L_PTE_YOUNG
 	tstne	r1, #L_PTE_PRESENT
 	moveq	r3, #0
 
-	str	r3, [r0]
+	str	r3, [r0, #2048]!
 	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
 #endif
 	mov	pc, lr
@@ -273,8 +274,6 @@ __v7_setup:
 	ALT_SMP(orr	r4, r4, #TTB_FLAGS_SMP)
 	ALT_UP(orr	r4, r4, #TTB_FLAGS_UP)
 	mcr	p15, 0, r4, c2, c0, 1		@ load TTB1
-	mov	r10, #0x1f			@ domains 0, 1 = manager
-	mcr	p15, 0, r10, c3, c0, 0		@ load domain access register
 	/*
 	 * Memory region attributes with SCTLR.TRE=1
 	 *
@@ -313,6 +312,10 @@ __v7_setup:
 #ifdef CONFIG_CPU_ENDIAN_BE8
 	orr	r6, r6, #1 << 25		@ big-endian page tables
 #endif
+#ifdef CONFIG_SWP_EMULATE
+	orr     r5, r5, #(1 << 10)              @ set SW bit in "clear"
+	bic     r6, r6, #(1 << 10)              @ clear it in "mmuset"
+#endif
    	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
@@ -381,7 +384,7 @@ __v7_ca9mp_proc_info:
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
-	b	__v7_ca9mp_setup
+	W(b)	__v7_ca9mp_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
@@ -413,7 +416,7 @@ __v7_proc_info:
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
-	b	__v7_setup
+	W(b)	__v7_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
 	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 523408c0bb3..5a37c5e45c4 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -500,8 +500,8 @@ ENTRY(cpu_xscale_set_pte_ext)
 	@
 	@ Erratum 40: must set memory to write-through for user read-only pages
 	@
-	and	ip, r1, #(L_PTE_MT_MASK | L_PTE_USER | L_PTE_WRITE) & ~(4 << 2)
-	teq	ip, #L_PTE_MT_WRITEBACK | L_PTE_USER
+	and	ip, r1, #(L_PTE_MT_MASK | L_PTE_USER | L_PTE_RDONLY) & ~(4 << 2)
+	teq	ip, #L_PTE_MT_WRITEBACK | L_PTE_USER | L_PTE_RDONLY
 
 	moveq	r1, #L_PTE_MT_WRITETHROUGH
 	and	r1, r1, #L_PTE_MT_MASK
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 85d3e55ca4a..07f23bb42be 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -17,12 +17,15 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/timex.h>
+#include <linux/sched.h>
 #include <linux/io.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/sched_clock.h>
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
@@ -36,7 +39,7 @@
 /*
  * IOP clocksource (free-running timer 1).
  */
-static cycle_t iop_clocksource_read(struct clocksource *unused)
+static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
 {
 	return 0xffffffffu - read_tcr1();
 }
@@ -49,15 +52,21 @@ static struct clocksource iop_clocksource = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static DEFINE_CLOCK_DATA(cd);
+
 /*
  * IOP sched_clock() implementation via its clocksource.
  */
-unsigned long long sched_clock(void)
+unsigned long long notrace sched_clock(void)
 {
-	cycle_t cyc = iop_clocksource_read(NULL);
-	struct clocksource *cs = &iop_clocksource;
+	u32 cyc = 0xffffffffu - read_tcr1();
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
 
-	return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+static void notrace iop_update_sched_clock(void)
+{
+	u32 cyc = 0xffffffffu - read_tcr1();
+	update_sched_clock(&cd, cyc, (u32)~0);
 }
 
 /*
@@ -87,6 +96,7 @@ static void iop_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_PERIODIC:
 		write_tmr0(tmr & ~IOP_TMR_EN);
 		write_tcr0(ticks_per_jiffy - 1);
+		write_trr0(ticks_per_jiffy - 1);
 		tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
@@ -142,6 +152,8 @@ void __init iop_init_time(unsigned long tick_rate)
 {
 	u32 timer_ctl;
 
+	init_sched_clock(&cd, iop_update_sched_clock, 32, tick_rate);
+
 	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
 	iop_tick_rate = tick_rate;
 
@@ -152,6 +164,7 @@ void __init iop_init_time(unsigned long tick_rate)
 	 * Set up interrupting clockevent timer 0.
 	 */
 	write_tmr0(timer_ctl & ~IOP_TMR_EN);
+	write_tisr(1);
 	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
 	clockevents_calc_mult_shift(&iop_clockevent,
 				    tick_rate, IOP_MIN_RANGE);
@@ -161,9 +174,6 @@ void __init iop_init_time(unsigned long tick_rate)
 		clockevent_delta2ns(0xf, &iop_clockevent);
 	iop_clockevent.cpumask = cpumask_of(0);
 	clockevents_register_device(&iop_clockevent);
-	write_trr0(ticks_per_jiffy - 1);
-	write_tcr0(ticks_per_jiffy - 1);
-	write_tmr0(timer_ctl);
 
 	/*
 	 * Set up free-running clocksource timer 1.
@@ -171,7 +181,5 @@ void __init iop_init_time(unsigned long tick_rate)
 	write_trr1(0xffffffff);
 	write_tcr1(0xffffffff);
 	write_tmr1(timer_ctl);
-	clocksource_calc_mult_shift(&iop_clocksource, tick_rate,
-				    IOP_MIN_RANGE);
-	clocksource_register(&iop_clocksource);
+	clocksource_register_hz(&iop_clocksource, tick_rate);
 }
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 64e3a64520e..389f2179501 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -21,10 +21,6 @@ config ARCH_MX2
 
 config ARCH_MX25
 	bool "MX25-based"
-	select CPU_ARM926T
-	select ARCH_MXC_IOMUX_V3
-	select HAVE_FB_IMX
-	select ARCH_MXC_AUDMUX_V2
 	help
 	  This enables support for systems based on the Freescale i.MX25 family
 
@@ -51,7 +47,6 @@ endchoice
 
 source "arch/arm/mach-imx/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
-source "arch/arm/mach-mx25/Kconfig"
 source "arch/arm/mach-mxc91231/Kconfig"
 source "arch/arm/mach-mx5/Kconfig"
 
@@ -68,12 +63,10 @@ config MXC_IRQ_PRIOR
 	  Say N here, unless you have a specialized requirement.
 
 config MXC_TZIC
-	bool "Enable TrustZone Interrupt Controller"
-	depends on ARCH_MX51
-	help
-	  This will be automatically selected for all processors
-	  containing this interrupt controller.
-	  Say N here only if you are really sure.
+	bool
+
+config MXC_AVIC
+	bool
 
 config MXC_PWM
 	tristate "Enable PWM driver"
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 37267095278..5fd20e96876 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -3,10 +3,11 @@
 #
 
 # Common support
-obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
+obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o
 
-# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
+# MX51 uses the TZIC interrupt controller, older platforms use AVIC
 obj-$(CONFIG_MXC_TZIC) += tzic.o
+obj-$(CONFIG_MXC_AVIC) += avic.o
 
 obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 0be1ac7f421..175e3647bb2 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -209,7 +209,7 @@ static int mxc_audmux_v2_init(void)
 		audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
 	}
 #endif
-#if defined(CONFIG_ARCH_MX25)
+#if defined(CONFIG_SOC_IMX25)
 	if (cpu_is_mx25()) {
 		audmux_clk = clk_get(NULL, "audmux");
 		if (IS_ERR(audmux_clk)) {
@@ -220,7 +220,7 @@ static int mxc_audmux_v2_init(void)
 		}
 		audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
 	}
-#endif
+#endif /* if defined(CONFIG_SOC_IMX25) */
 	audmux_debugfs_init();
 
 	return 0;
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/avic.c
index 7331f2ace5f..9a4e8a22dd0 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -24,6 +24,8 @@
 #include <asm/mach/irq.h>
 #include <mach/hardware.h>
 
+#include "irq-common.h"
+
 #define AVIC_INTCNTL		0x00	/* int control reg */
 #define AVIC_NIMASK		0x04	/* int mask reg */
 #define AVIC_INTENNUM		0x08	/* int enable number reg */
@@ -46,9 +48,9 @@
 
 void __iomem *avic_base;
 
-int imx_irq_set_priority(unsigned char irq, unsigned char prio)
-{
 #ifdef CONFIG_MXC_IRQ_PRIOR
+static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
+{
 	unsigned int temp;
 	unsigned int mask = 0x0F << irq % 8 * 4;
 
@@ -62,14 +64,11 @@ int imx_irq_set_priority(unsigned char irq, unsigned char prio)
 	__raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
 
 	return 0;
-#else
-	return -ENOSYS;
-#endif
 }
-EXPORT_SYMBOL(imx_irq_set_priority);
+#endif
 
 #ifdef CONFIG_FIQ
-int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
+static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
 {
 	unsigned int irqt;
 
@@ -87,7 +86,6 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
 
 	return 0;
 }
-EXPORT_SYMBOL(mxc_set_irq_fiq);
 #endif /* CONFIG_FIQ */
 
 /* Disable interrupt number "irq" in the AVIC */
@@ -102,10 +100,18 @@ static void mxc_unmask_irq(unsigned int irq)
 	__raw_writel(irq, avic_base + AVIC_INTENNUM);
 }
 
-static struct irq_chip mxc_avic_chip = {
-	.ack = mxc_mask_irq,
-	.mask = mxc_mask_irq,
-	.unmask = mxc_unmask_irq,
+static struct mxc_irq_chip mxc_avic_chip = {
+	.base = {
+		.ack = mxc_mask_irq,
+		.mask = mxc_mask_irq,
+		.unmask = mxc_unmask_irq,
+	},
+#ifdef CONFIG_MXC_IRQ_PRIOR
+	.set_priority = avic_irq_set_priority,
+#endif
+#ifdef CONFIG_FIQ
+	.set_irq_fiq = avic_set_irq_fiq,
+#endif
 };
 
 /*
@@ -133,7 +139,7 @@ void __init mxc_init_irq(void __iomem *irqbase)
 	__raw_writel(0, avic_base + AVIC_INTTYPEH);
 	__raw_writel(0, avic_base + AVIC_INTTYPEL);
 	for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
-		set_irq_chip(i, &mxc_avic_chip);
+		set_irq_chip(i, &mxc_avic_chip.base);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID);
 	}
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 039538e6879..ce81481becf 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -144,7 +144,6 @@ static int __init mxc_cpufreq_init(struct cpufreq_policy *policy)
 	imx_freq_table[i].frequency = CPUFREQ_TABLE_END;
 
 	policy->cur = clk_get_rate(cpu_clk) / 1000;
-	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 	policy->min = policy->cpuinfo.min_freq = cpu_freq_khz_min;
 	policy->max = policy->cpuinfo.max_freq = cpu_freq_khz_max;
 
diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c
index 735776d8495..e9bcefe79a4 100644
--- a/arch/arm/plat-mxc/devices.c
+++ b/arch/arm/plat-mxc/devices.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -36,9 +37,10 @@ int __init mxc_register_device(struct platform_device *pdev, void *data)
 	return ret;
 }
 
-struct platform_device *__init imx_add_platform_device(const char *name, int id,
+struct platform_device *__init imx_add_platform_device_dmamask(
+		const char *name, int id,
 		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data)
+		const void *data, size_t size_data, u64 dmamask)
 {
 	int ret = -ENOMEM;
 	struct platform_device *pdev;
@@ -47,6 +49,23 @@ struct platform_device *__init imx_add_platform_device(const char *name, int id,
 	if (!pdev)
 		goto err;
 
+	if (dmamask) {
+		/*
+		 * This memory isn't freed when the device is put,
+		 * I don't have a nice idea for that though.  Conceptually
+		 * dma_mask in struct device should not be a pointer.
+		 * See http://thread.gmane.org/gmane.linux.kernel.pci/9081
+		 */
+		pdev->dev.dma_mask =
+			kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
+		if (!pdev->dev.dma_mask)
+			/* ret is still -ENOMEM; */
+			goto err;
+
+		*pdev->dev.dma_mask = dmamask;
+		pdev->dev.coherent_dma_mask = dmamask;
+	}
+
 	if (res) {
 		ret = platform_device_add_resources(pdev, res, num_resources);
 		if (ret)
diff --git a/arch/arm/plat-mxc/devices/Kconfig b/arch/arm/plat-mxc/devices/Kconfig
index 9aa6f3ea901..2537166468a 100644
--- a/arch/arm/plat-mxc/devices/Kconfig
+++ b/arch/arm/plat-mxc/devices/Kconfig
@@ -1,29 +1,73 @@
-config IMX_HAVE_PLATFORM_ESDHC
-	bool
-
 config IMX_HAVE_PLATFORM_FEC
 	bool
-	default y if ARCH_MX25 || SOC_IMX27 || ARCH_MX35 || ARCH_MX51
+	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51
 
 config IMX_HAVE_PLATFORM_FLEXCAN
 	select HAVE_CAN_FLEXCAN if CAN
 	bool
 
+config IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	bool
+
 config IMX_HAVE_PLATFORM_GPIO_KEYS
 	bool
-	default y if ARCH_MX51
+	default y if SOC_IMX51
+
+config IMX_HAVE_PLATFORM_IMX21_HCD
+	bool
 	
+config IMX_HAVE_PLATFORM_IMX2_WDT
+	bool
+
+config IMX_HAVE_PLATFORM_IMXDI_RTC
+	bool
+
+config IMX_HAVE_PLATFORM_IMX_FB
+	bool
+	select HAVE_FB_IMX
+
 config IMX_HAVE_PLATFORM_IMX_I2C
 	bool
 
+config IMX_HAVE_PLATFORM_IMX_KEYPAD
+	bool
+
 config IMX_HAVE_PLATFORM_IMX_SSI
 	bool
 
 config IMX_HAVE_PLATFORM_IMX_UART
 	bool
 
+config IMX_HAVE_PLATFORM_IMX_UDC
+	bool
+
+config IMX_HAVE_PLATFORM_MX1_CAMERA
+	bool
+
+config IMX_HAVE_PLATFORM_MX2_CAMERA
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_EHCI
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_MMC
+	bool
+
 config IMX_HAVE_PLATFORM_MXC_NAND
 	bool
 
+config IMX_HAVE_PLATFORM_MXC_PWM
+	bool
+
+config IMX_HAVE_PLATFORM_MXC_RNGA
+	bool
+	select ARCH_HAS_RNGA
+
+config IMX_HAVE_PLATFORM_MXC_W1
+	bool
+
+config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	bool
+
 config IMX_HAVE_PLATFORM_SPI_IMX
 	bool
diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile
index 45aefeb283b..75cd2ece905 100644
--- a/arch/arm/plat-mxc/devices/Makefile
+++ b/arch/arm/plat-mxc/devices/Makefile
@@ -1,10 +1,24 @@
-obj-$(CONFIG_IMX_HAVE_PLATFORM_ESDHC) += platform-esdhc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
 obj-y += platform-imx-dma.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_KEYPAD) += platform-imx-keypad.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_SSI) += platform-imx-ssi.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UART) += platform-imx-uart.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_UDC) += platform-imx_udc.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MX1_CAMERA) += platform-mx1-camera.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_PWM) += platform-mxc_pwm.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
diff --git a/arch/arm/plat-mxc/devices/platform-esdhc.c b/arch/arm/plat-mxc/devices/platform-esdhc.c
deleted file mode 100644
index 2605bfa0dfb..00000000000
--- a/arch/arm/plat-mxc/devices/platform-esdhc.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <mach/hardware.h>
-#include <mach/devices-common.h>
-#include <mach/esdhc.h>
-
-#define imx_esdhc_imx_data_entry_single(soc, _id, hwid) \
-	{								\
-		.id = _id,						\
-		.iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR,	\
-		.irq = soc ## _INT_ESDHC ## hwid,			\
-	}
-
-#define imx_esdhc_imx_data_entry(soc, id, hwid)	\
-	[id] = imx_esdhc_imx_data_entry_single(soc, id, hwid)
-
-#ifdef CONFIG_ARCH_MX25
-const struct imx_esdhc_imx_data imx25_esdhc_data[] __initconst = {
-#define imx25_esdhc_data_entry(_id, _hwid)				\
-	imx_esdhc_imx_data_entry(MX25, _id, _hwid)
-	imx25_esdhc_data_entry(0, 1),
-	imx25_esdhc_data_entry(1, 2),
-};
-#endif /* ifdef CONFIG_ARCH_MX25 */
-
-#ifdef CONFIG_ARCH_MX35
-const struct imx_esdhc_imx_data imx35_esdhc_data[] __initconst = {
-#define imx35_esdhc_data_entry(_id, _hwid)                           \
-	imx_esdhc_imx_data_entry(MX35, _id, _hwid)
-	imx35_esdhc_data_entry(0, 1),
-	imx35_esdhc_data_entry(1, 2),
-	imx35_esdhc_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_ARCH_MX35 */
-
-#ifdef CONFIG_ARCH_MX51
-const struct imx_esdhc_imx_data imx51_esdhc_data[] __initconst = {
-#define imx51_esdhc_data_entry(_id, _hwid)				\
-	imx_esdhc_imx_data_entry(MX51, _id, _hwid)
-	imx51_esdhc_data_entry(0, 1),
-	imx51_esdhc_data_entry(1, 2),
-	imx51_esdhc_data_entry(2, 3),
-	imx51_esdhc_data_entry(3, 4),
-};
-#endif /* ifdef CONFIG_ARCH_MX51 */
-
-struct platform_device *__init imx_add_esdhc(
-		const struct imx_esdhc_imx_data *data,
-		const struct esdhc_platform_data *pdata)
-{
-	struct resource res[] = {
-		{
-			.start = data->iobase,
-			.end = data->iobase + SZ_16K - 1,
-			.flags = IORESOURCE_MEM,
-		}, {
-			.start = data->irq,
-			.end = data->irq,
-			.flags = IORESOURCE_IRQ,
-		},
-	};
-
-	return imx_add_platform_device("sdhci-esdhc-imx", data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
-}
diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c
index 11d087f4e21..269ec78aba7 100644
--- a/arch/arm/plat-mxc/devices/platform-fec.c
+++ b/arch/arm/plat-mxc/devices/platform-fec.c
@@ -16,22 +16,22 @@
 		.irq = soc ## _INT_FEC,					\
 	}
 
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
 const struct imx_fec_data imx25_fec_data __initconst =
 	imx_fec_data_entry_single(MX25);
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_fec_data imx27_fec_data __initconst =
 	imx_fec_data_entry_single(MX27);
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
 const struct imx_fec_data imx35_fec_data __initconst =
 	imx_fec_data_entry_single(MX35);
 #endif
 
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
 const struct imx_fec_data imx51_fec_data __initconst =
 	imx_fec_data_entry_single(MX51);
 #endif
diff --git a/arch/arm/plat-mxc/devices/platform-flexcan.c b/arch/arm/plat-mxc/devices/platform-flexcan.c
index 5e97a01f14f..4e8497af2eb 100644
--- a/arch/arm/plat-mxc/devices/platform-flexcan.c
+++ b/arch/arm/plat-mxc/devices/platform-flexcan.c
@@ -5,26 +5,54 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
-
+#include <mach/hardware.h>
 #include <mach/devices-common.h>
 
-struct platform_device *__init imx_add_flexcan(int id,
-		resource_size_t iobase, resource_size_t iosize,
-		resource_size_t irq,
+#define imx_flexcan_data_entry_single(soc, _id, _hwid, _size)		\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _CAN ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_CAN ## _hwid,			\
+	}
+
+#define imx_flexcan_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = imx_flexcan_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_flexcan_data imx25_flexcan_data[] __initconst = {
+#define imx25_flexcan_data_entry(_id, _hwid)				\
+	imx_flexcan_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx25_flexcan_data_entry(0, 1),
+	imx25_flexcan_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_flexcan_data imx35_flexcan_data[] __initconst = {
+#define imx35_flexcan_data_entry(_id, _hwid)				\
+	imx_flexcan_data_entry(MX35, _id, _hwid, SZ_16K)
+	imx35_flexcan_data_entry(0, 1),
+	imx35_flexcan_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_flexcan(
+		const struct imx_flexcan_data *data,
 		const struct flexcan_platform_data *pdata)
 {
 	struct resource res[] = {
 		{
-			.start = iobase,
-			.end = iobase + iosize - 1,
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
 			.flags = IORESOURCE_MEM,
 		}, {
-			.start = irq,
-			.end = irq,
+			.start = data->irq,
+			.end = data->irq,
 			.flags = IORESOURCE_IRQ,
 		},
 	};
 
-	return imx_add_platform_device("flexcan", id, res, ARRAY_SIZE(res),
-			pdata, sizeof(*pdata));
+	return imx_add_platform_device("flexcan", data->id,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
 }
diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
new file mode 100644
index 00000000000..59c33f6e401
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_fsl_usb2_udc_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _USB_OTG_BASE_ADDR,			\
+		.irq = soc ## _INT_USB_OTG,				\
+	}
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
+	imx_fsl_usb2_udc_data_entry_single(MX25);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
+	imx_fsl_usb2_udc_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
+	imx_fsl_usb2_udc_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
+	imx_fsl_usb2_udc_data_entry_single(MX35);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_fsl_usb2_udc(
+		const struct imx_fsl_usb2_udc_data *data,
+		const struct fsl_usb2_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_512 - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index 02d98901805..33530d2d5ed 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -12,15 +12,7 @@
 
 #include <mach/hardware.h>
 #include <mach/devices-common.h>
-#ifdef SDMA_IS_MERGED
 #include <mach/sdma.h>
-#else
-struct sdma_platform_data {
-	int sdma_version;
-	char *cpu_name;
-	int to_version;
-};
-#endif
 
 struct imx_imx_sdma_data {
 	resource_size_t iobase;
@@ -39,25 +31,25 @@ struct imx_imx_sdma_data {
 		},							\
 	}
 
-#ifdef CONFIG_ARCH_MX25
-const struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
+#ifdef CONFIG_SOC_IMX25
+struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
 	imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0);
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
 
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
 struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
 	imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0);
-#endif /* ifdef CONFIG_ARCH_MX31 */
+#endif /* ifdef CONFIG_SOC_IMX31 */
 
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
 struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
 	imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0);
-#endif /* ifdef CONFIG_ARCH_MX35 */
+#endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_ARCH_MX51
-const struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
+#ifdef CONFIG_SOC_IMX51
+struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
 	imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0);
-#endif /* ifdef CONFIG_ARCH_MX51 */
+#endif /* ifdef CONFIG_SOC_IMX51 */
 
 static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
 		const struct imx_imx_sdma_data *data)
@@ -84,6 +76,83 @@ static struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
 	return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0);
 }
 
+#ifdef CONFIG_ARCH_MX25
+static struct sdma_script_start_addrs addr_imx25_to1 = {
+	.ap_2_ap_addr = 729,
+	.uart_2_mcu_addr = 904,
+	.per_2_app_addr = 1255,
+	.mcu_2_app_addr = 834,
+	.uartsh_2_mcu_addr = 1120,
+	.per_2_shp_addr = 1329,
+	.mcu_2_shp_addr = 1048,
+	.ata_2_mcu_addr = 1560,
+	.mcu_2_ata_addr = 1479,
+	.app_2_per_addr = 1189,
+	.app_2_mcu_addr = 770,
+	.shp_2_per_addr = 1407,
+	.shp_2_mcu_addr = 979,
+};
+#endif
+
+#ifdef CONFIG_ARCH_MX31
+static struct sdma_script_start_addrs addr_imx31_to1 = {
+	.per_2_per_addr = 1677,
+};
+
+static struct sdma_script_start_addrs addr_imx31_to2 = {
+	.ap_2_ap_addr = 423,
+	.ap_2_bp_addr = 829,
+	.bp_2_ap_addr = 1029,
+};
+#endif
+
+#ifdef CONFIG_ARCH_MX35
+static struct sdma_script_start_addrs addr_imx35_to1 = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.uartsh_2_mcu_addr = 1183,
+	.per_2_shp_addr = 1033,
+	.mcu_2_shp_addr = 961,
+	.ata_2_mcu_addr = 1333,
+	.mcu_2_ata_addr = 1252,
+	.app_2_mcu_addr = 683,
+	.shp_2_per_addr = 1111,
+	.shp_2_mcu_addr = 892,
+};
+
+static struct sdma_script_start_addrs addr_imx35_to2 = {
+	.ap_2_ap_addr = 729,
+	.uart_2_mcu_addr = 904,
+	.per_2_app_addr = 1597,
+	.mcu_2_app_addr = 834,
+	.uartsh_2_mcu_addr = 1270,
+	.per_2_shp_addr = 1120,
+	.mcu_2_shp_addr = 1048,
+	.ata_2_mcu_addr = 1429,
+	.mcu_2_ata_addr = 1339,
+	.app_2_per_addr = 1531,
+	.app_2_mcu_addr = 770,
+	.shp_2_per_addr = 1198,
+	.shp_2_mcu_addr = 979,
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX51
+static struct sdma_script_start_addrs addr_imx51_to1 = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.mcu_2_shp_addr = 961,
+	.ata_2_mcu_addr = 1473,
+	.mcu_2_ata_addr = 1392,
+	.app_2_per_addr = 1033,
+	.app_2_mcu_addr = 683,
+	.shp_2_per_addr = 1251,
+	.shp_2_mcu_addr = 892,
+};
+#endif
+
 static int __init imxXX_add_imx_dma(void)
 {
 	struct platform_device *ret;
@@ -94,30 +163,42 @@ static int __init imxXX_add_imx_dma(void)
 	else
 #endif
 
-#if defined(CONFIG_ARCH_MX25)
-	if (cpu_is_mx25())
+#if defined(CONFIG_SOC_IMX25)
+	if (cpu_is_mx25()) {
+		imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25_to1;
 		ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
-	else
+	} else
 #endif
 
-#if defined(CONFIG_ARCH_MX31)
+#if defined(CONFIG_SOC_IMX31)
 	if (cpu_is_mx31()) {
-		imx31_imx_sdma_data.pdata.to_version = mx31_revision() >> 4;
+		int to_version = mx31_revision() >> 4;
+		imx31_imx_sdma_data.pdata.to_version = to_version;
+		if (to_version == 1)
+			imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to1;
+		else
+			imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to2;
 		ret = imx_add_imx_sdma(&imx31_imx_sdma_data);
 	} else
 #endif
 
-#if defined(CONFIG_ARCH_MX35)
+#if defined(CONFIG_SOC_IMX35)
 	if (cpu_is_mx35()) {
-		imx35_imx_sdma_data.pdata.to_version = mx35_revision() >> 4;
+		int to_version = mx35_revision() >> 4;
+		imx35_imx_sdma_data.pdata.to_version = to_version;
+		if (to_version == 1)
+			imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to1;
+		else
+			imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to2;
 		ret = imx_add_imx_sdma(&imx35_imx_sdma_data);
 	} else
 #endif
 
 #if defined(CONFIG_ARCH_MX51)
-	if (cpu_is_mx51())
+	if (cpu_is_mx51()) {
+		imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
 		ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
-	else
+	} else
 #endif
 		ret = ERR_PTR(-ENODEV);
 
diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/plat-mxc/devices/platform-imx-fb.c
new file mode 100644
index 00000000000..6100a7d824d
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-fb.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_fb_data_entry_single(soc, _size)			\
+	{								\
+		.iobase = soc ## _LCDC_BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq = soc ## _INT_LCDC,				\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
+	imx_imx_fb_data_entry_single(MX21, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
+	imx_imx_fb_data_entry_single(MX25, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
+	imx_imx_fb_data_entry_single(MX27, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_imx_fb(
+		const struct imx_imx_fb_data *data,
+		const struct imx_fb_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("imx-fb", 0,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
index 679588453aa..72ba880c75a 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c
@@ -30,7 +30,7 @@ const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
 	imx_imx_i2c_data_entry_single(MX21, 0, , SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
 const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
 #define imx25_imx_i2c_data_entry(_id, _hwid)				\
 	imx_imx_i2c_data_entry(MX25, _id, _hwid, SZ_16K)
@@ -38,7 +38,7 @@ const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
 	imx25_imx_i2c_data_entry(1, 2),
 	imx25_imx_i2c_data_entry(2, 3),
 };
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
@@ -49,7 +49,7 @@ const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
 const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
 #define imx31_imx_i2c_data_entry(_id, _hwid)				\
 	imx_imx_i2c_data_entry(MX31, _id, _hwid, SZ_4K)
@@ -57,9 +57,9 @@ const struct imx_imx_i2c_data imx31_imx_i2c_data[] __initconst = {
 	imx31_imx_i2c_data_entry(1, 2),
 	imx31_imx_i2c_data_entry(2, 3),
 };
-#endif /* ifdef CONFIG_ARCH_MX31 */
+#endif /* ifdef CONFIG_SOC_IMX31 */
 
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
 const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
 #define imx35_imx_i2c_data_entry(_id, _hwid)				\
 	imx_imx_i2c_data_entry(MX35, _id, _hwid, SZ_4K)
@@ -67,16 +67,16 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
 	imx35_imx_i2c_data_entry(1, 2),
 	imx35_imx_i2c_data_entry(2, 3),
 };
-#endif /* ifdef CONFIG_ARCH_MX35 */
+#endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
 #define imx51_imx_i2c_data_entry(_id, _hwid)				\
 	imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
 	imx51_imx_i2c_data_entry(0, 1),
 	imx51_imx_i2c_data_entry(1, 2),
 };
-#endif /* ifdef CONFIG_ARCH_MX51 */
+#endif /* ifdef CONFIG_SOC_IMX51 */
 
 struct platform_device *__init imx_add_imx_i2c(
 		const struct imx_imx_i2c_data *data,
diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/plat-mxc/devices/platform-imx-keypad.c
new file mode 100644
index 00000000000..40238f0b864
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx-keypad.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_keypad_data_entry_single(soc, _size)			\
+	{								\
+		.iobase = soc ## _KPP_BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq = soc ## _INT_KPP,					\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX21, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX25, SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX27, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_imx_keypad_data imx31_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX31, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_imx_keypad_data imx35_imx_keypad_data __initconst =
+	imx_imx_keypad_data_entry_single(MX35, SZ_16);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_imx_keypad(
+		const struct imx_imx_keypad_data *data,
+		const struct matrix_keymap_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx-keypad", -1,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
index 38a7a0b8f2f..2569c8d8a2e 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
@@ -30,14 +30,14 @@ const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
 const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
 #define imx25_imx_ssi_data_entry(_id, _hwid)				\
 	imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
 	imx25_imx_ssi_data_entry(0, 1),
 	imx25_imx_ssi_data_entry(1, 2),
 };
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
@@ -48,32 +48,33 @@ const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
 const struct imx_imx_ssi_data imx31_imx_ssi_data[] __initconst = {
 #define imx31_imx_ssi_data_entry(_id, _hwid)				\
 	imx_imx_ssi_data_entry(MX31, _id, _hwid, SZ_4K)
 	imx31_imx_ssi_data_entry(0, 1),
 	imx31_imx_ssi_data_entry(1, 2),
 };
-#endif /* ifdef CONFIG_ARCH_MX31 */
+#endif /* ifdef CONFIG_SOC_IMX31 */
 
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
 const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
 #define imx35_imx_ssi_data_entry(_id, _hwid)				\
 	imx_imx_ssi_data_entry(MX35, _id, _hwid, SZ_4K)
 	imx35_imx_ssi_data_entry(0, 1),
 	imx35_imx_ssi_data_entry(1, 2),
 };
-#endif /* ifdef CONFIG_ARCH_MX35 */
+#endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
 const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
 #define imx51_imx_ssi_data_entry(_id, _hwid)				\
 	imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K)
 	imx51_imx_ssi_data_entry(0, 1),
 	imx51_imx_ssi_data_entry(1, 2),
+	imx51_imx_ssi_data_entry(2, 3),
 };
-#endif /* ifdef CONFIG_ARCH_MX51 */
+#endif /* ifdef CONFIG_SOC_IMX51 */
 
 struct platform_device *__init imx_add_imx_ssi(
 		const struct imx_imx_ssi_data *data,
diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c
index 2039640adf2..3c854c2cc6d 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-uart.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c
@@ -47,7 +47,7 @@ const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
 const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
 #define imx25_imx_uart_data_entry(_id, _hwid)				\
 	imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
@@ -57,7 +57,7 @@ const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
 	imx25_imx_uart_data_entry(3, 4),
 	imx25_imx_uart_data_entry(4, 5),
 };
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
@@ -72,7 +72,7 @@ const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
 const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
 #define imx31_imx_uart_data_entry(_id, _hwid)				\
 	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_4K)
@@ -82,9 +82,9 @@ const struct imx_imx_uart_1irq_data imx31_imx_uart_data[] __initconst = {
 	imx31_imx_uart_data_entry(3, 4),
 	imx31_imx_uart_data_entry(4, 5),
 };
-#endif /* ifdef CONFIG_ARCH_MX31 */
+#endif /* ifdef CONFIG_SOC_IMX31 */
 
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
 const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
 #define imx35_imx_uart_data_entry(_id, _hwid)				\
 	imx_imx_uart_1irq_data_entry(MX31, _id, _hwid, SZ_16K)
@@ -92,9 +92,21 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
 	imx35_imx_uart_data_entry(1, 2),
 	imx35_imx_uart_data_entry(2, 3),
 };
-#endif /* ifdef CONFIG_ARCH_MX35 */
+#endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX50
+const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst = {
+#define imx50_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX50, _id, _hwid, SZ_4K)
+	imx50_imx_uart_data_entry(0, 1),
+	imx50_imx_uart_data_entry(1, 2),
+	imx50_imx_uart_data_entry(2, 3),
+	imx50_imx_uart_data_entry(3, 4),
+	imx50_imx_uart_data_entry(4, 5),
+};
+#endif /* ifdef CONFIG_SOC_IMX50 */
+
+#ifdef CONFIG_SOC_IMX51
 const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
 #define imx51_imx_uart_data_entry(_id, _hwid)				\
 	imx_imx_uart_1irq_data_entry(MX51, _id, _hwid, SZ_4K)
@@ -102,7 +114,17 @@ const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
 	imx51_imx_uart_data_entry(1, 2),
 	imx51_imx_uart_data_entry(2, 3),
 };
-#endif /* ifdef CONFIG_ARCH_MX51 */
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = {
+#define imx53_imx_uart_data_entry(_id, _hwid)				\
+	imx_imx_uart_1irq_data_entry(MX53, _id, _hwid, SZ_4K)
+	imx53_imx_uart_data_entry(0, 1),
+	imx53_imx_uart_data_entry(1, 2),
+	imx53_imx_uart_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX53 */
 
 struct platform_device *__init imx_add_imx_uart_3irq(
 		const struct imx_imx_uart_3irq_data *data,
diff --git a/arch/arm/plat-mxc/devices/platform-imx2-wdt.c b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
new file mode 100644
index 00000000000..e0aec61177f
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx2-wdt.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)		\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _WDOG ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+	}
+#define imx_imx2_wdt_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = imx_imx2_wdt_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
+	imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst =
+	imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
+	imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_imx2_wdt_data imx31_imx2_wdt_data __initconst =
+	imx_imx2_wdt_data_entry_single(MX31, 0, , SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_imx2_wdt_data imx35_imx2_wdt_data __initconst =
+	imx_imx2_wdt_data_entry_single(MX35, 0, , SZ_16K);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_imx2_wdt_data imx51_imx2_wdt_data[] __initconst = {
+#define imx51_imx2_wdt_data_entry(_id, _hwid)				\
+	imx_imx2_wdt_data_entry(MX51, _id, _hwid, SZ_16K)
+	imx51_imx2_wdt_data_entry(0, 1),
+	imx51_imx2_wdt_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+struct platform_device *__init imx_add_imx2_wdt(
+		const struct imx_imx2_wdt_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+	return imx_add_platform_device("imx2-wdt", data->id,
+			res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx21-hcd.c b/arch/arm/plat-mxc/devices/platform-imx21-hcd.c
new file mode 100644
index 00000000000..5770a42f33b
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx21-hcd.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx21_hcd_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _USBOTG_BASE_ADDR,			\
+		.irq = soc ## _INT_USBHOST,				\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_imx21_hcd_data imx21_imx21_hcd_data __initconst =
+	imx_imx21_hcd_data_entry_single(MX21);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+struct platform_device *__init imx_add_imx21_hcd(
+		const struct imx_imx21_hcd_data *data,
+		const struct mx21_usbh_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_8K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("imx21-hcd", 0,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imx_udc.c b/arch/arm/plat-mxc/devices/platform-imx_udc.c
new file mode 100644
index 00000000000..6fd675dfce1
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imx_udc.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imx_udc_data_entry_single(soc, _size)			\
+	{								\
+		.iobase = soc ## _USBD_BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq0 = soc ## _INT_USBD0,				\
+		.irq1 = soc ## _INT_USBD1,				\
+		.irq2 = soc ## _INT_USBD2,				\
+		.irq3 = soc ## _INT_USBD3,				\
+		.irq4 = soc ## _INT_USBD4,				\
+		.irq5 = soc ## _INT_USBD5,				\
+		.irq6 = soc ## _INT_USBD6,				\
+	}
+
+#define imx_imx_udc_data_entry(soc, _size)				\
+	[_id] = imx_imx_udc_data_entry_single(soc, _size)
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_imx_udc_data imx1_imx_udc_data __initconst =
+	imx_imx_udc_data_entry_single(MX1, SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+struct platform_device *__init imx_add_imx_udc(
+		const struct imx_imx_udc_data *data,
+		const struct imxusb_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq0,
+			.end = data->irq0,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq1,
+			.end = data->irq1,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq2,
+			.end = data->irq2,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq3,
+			.end = data->irq3,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq4,
+			.end = data->irq4,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq5,
+			.end = data->irq5,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->irq6,
+			.end = data->irq6,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imx_udc", 0,
+			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
new file mode 100644
index 00000000000..10653cc8d1f
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-imxdi_rtc.c
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_imxdi_rtc_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _DRYICE_BASE_ADDR,			\
+		.irq = soc ## _INT_DRYICE,				\
+	}
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst =
+	imx_imxdi_rtc_data_entry_single(MX25);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+struct platform_device *__init imx_add_imxdi_rtc(
+		const struct imx_imxdi_rtc_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("imxdi_rtc", 0,
+			res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mx1-camera.c b/arch/arm/plat-mxc/devices/platform-mx1-camera.c
new file mode 100644
index 00000000000..edcc581a30a
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mx1-camera.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mx1_camera_data_entry_single(soc, _size)			\
+	{								\
+		.iobase = soc ## _CSI ## _BASE_ADDR,			\
+		.iosize = _size,					\
+		.irq = soc ## _INT_CSI,					\
+	}
+
+#ifdef CONFIG_SOC_IMX1
+const struct imx_mx1_camera_data imx1_mx1_camera_data __initconst =
+	imx_mx1_camera_data_entry_single(MX1, 10);
+#endif /* ifdef CONFIG_SOC_IMX1 */
+
+struct platform_device *__init imx_add_mx1_camera(
+		const struct imx_mx1_camera_data *data,
+		const struct mx1_camera_pdata *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("mx1-camera", 0,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mx2-camera.c b/arch/arm/plat-mxc/devices/platform-mx2-camera.c
new file mode 100644
index 00000000000..b3f4828dc44
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mx2-camera.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mx2_camera_data_entry_single(soc)				\
+	{								\
+		.iobasecsi = soc ## _CSI_BASE_ADDR,			\
+		.iosizecsi = SZ_4K,					\
+		.irqcsi = soc ## _INT_CSI,				\
+	}
+#define imx_mx2_camera_data_entry_single_emma(soc)			\
+	{								\
+		.iobasecsi = soc ## _CSI_BASE_ADDR,			\
+		.iosizecsi = SZ_32,					\
+		.irqcsi = soc ## _INT_CSI,				\
+		.iobaseemmaprp = soc ## _EMMAPRP_BASE_ADDR,		\
+		.iosizeemmaprp = SZ_32,					\
+		.irqemmaprp = soc ## _INT_EMMAPRP,			\
+	}
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
+	imx_mx2_camera_data_entry_single(MX25);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
+	imx_mx2_camera_data_entry_single_emma(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_mx2_camera(
+		const struct imx_mx2_camera_data *data,
+		const struct mx2_camera_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobasecsi,
+			.end = data->iobasecsi + data->iosizecsi - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irqcsi,
+			.end = data->irqcsi,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->iobaseemmaprp,
+			.end = data->iobaseemmaprp + data->iosizeemmaprp - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irqemmaprp,
+			.end = data->irqemmaprp,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("mx2-camera", 0,
+			res, data->iobaseemmaprp ? 4 : 2,
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
new file mode 100644
index 00000000000..cc488f4b620
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_ehci_data_entry_single(soc, _id, hs)			\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _USB_ ## hs ## _BASE_ADDR,		\
+		.irq = soc ## _INT_USB_ ## hs,				\
+	}
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX25, 0, OTG);
+const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX25, 1, HS);
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
+const struct imx_mxc_ehci_data imx27_mxc_ehci_hs_data[] __initconst = {
+	imx_mxc_ehci_data_entry_single(MX27, 1, HS1),
+	imx_mxc_ehci_data_entry_single(MX27, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_ehci_data imx31_mxc_ehci_otg_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX31, 0, OTG);
+const struct imx_mxc_ehci_data imx31_mxc_ehci_hs_data[] __initconst = {
+	imx_mxc_ehci_data_entry_single(MX31, 1, HS1),
+	imx_mxc_ehci_data_entry_single(MX31, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_mxc_ehci_data imx35_mxc_ehci_otg_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX35, 0, OTG);
+const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX35, 1, HS);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_mxc_ehci(
+		const struct imx_mxc_ehci_data *data,
+		const struct mxc_usbh_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_512 - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+	return imx_add_platform_device_dmamask("mxc-ehci", data->id,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
new file mode 100644
index 00000000000..90d762f6f93
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size)		\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _SDHC ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_SDHC ## _hwid,			\
+		.dmareq = soc ## _DMA_REQ_SDHC ## _hwid,		\
+	}
+#define imx_mxc_mmc_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = imx_mxc_mmc_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_mmc_data imx21_mxc_mmc_data[] __initconst = {
+#define imx21_mxc_mmc_data_entry(_id, _hwid)				\
+	imx_mxc_mmc_data_entry(MX21, _id, _hwid, SZ_4K)
+	imx21_mxc_mmc_data_entry(0, 1),
+	imx21_mxc_mmc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_mmc_data imx27_mxc_mmc_data[] __initconst = {
+#define imx27_mxc_mmc_data_entry(_id, _hwid)				\
+	imx_mxc_mmc_data_entry(MX27, _id, _hwid, SZ_4K)
+	imx27_mxc_mmc_data_entry(0, 1),
+	imx27_mxc_mmc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_mmc_data imx31_mxc_mmc_data[] __initconst = {
+#define imx31_mxc_mmc_data_entry(_id, _hwid)				\
+	imx_mxc_mmc_data_entry(MX31, _id, _hwid, SZ_16K)
+	imx31_mxc_mmc_data_entry(0, 1),
+	imx31_mxc_mmc_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+struct platform_device *__init imx_add_mxc_mmc(
+		const struct imx_mxc_mmc_data *data,
+		const struct imxmmc_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		}, {
+			.start = data->dmareq,
+			.end = data->dmareq,
+			.flags = IORESOURCE_DMA,
+		},
+	};
+	return imx_add_platform_device_dmamask("mxc-mmc", data->id,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
index 3fdcc32e3d6..1568f39fba8 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c
@@ -31,27 +31,27 @@ const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
 	imx_mxc_nand_data_entry_single(MX21, SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX21 */
 
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
 const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
 	imx_mxc_nand_data_entry_single(MX25, SZ_8K);
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
 	imx_mxc_nand_data_entry_single(MX27, SZ_4K);
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
 const struct imx_mxc_nand_data imx31_mxc_nand_data __initconst =
 	imx_mxc_nand_data_entry_single(MX31, SZ_4K);
 #endif
 
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
 const struct imx_mxc_nand_data imx35_mxc_nand_data __initconst =
 	imx_mxc_nand_data_entry_single(MX35, SZ_8K);
 #endif
 
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
 const struct imx_mxc_nand_data imx51_mxc_nand_data __initconst =
 	imx_mxc_nandv3_data_entry_single(MX51, SZ_16K);
 #endif
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_pwm.c b/arch/arm/plat-mxc/devices/platform-mxc_pwm.c
new file mode 100644
index 00000000000..3d8ebdba38e
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_pwm.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2009-2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)		\
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _PWM ## _hwid ## _BASE_ADDR,		\
+		.iosize = _size,					\
+		.irq = soc ## _INT_PWM ## _hwid,			\
+	}
+#define imx_mxc_pwm_data_entry(soc, _id, _hwid, _size)			\
+	[_id] = imx_mxc_pwm_data_entry_single(soc, _id, _hwid, _size)
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_pwm_data imx21_mxc_pwm_data __initconst =
+	imx_mxc_pwm_data_entry_single(MX21, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_mxc_pwm_data imx25_mxc_pwm_data[] __initconst = {
+#define imx25_mxc_pwm_data_entry(_id, _hwid)				\
+	imx_mxc_pwm_data_entry(MX25, _id, _hwid, SZ_16K)
+	imx25_mxc_pwm_data_entry(0, 1),
+	imx25_mxc_pwm_data_entry(1, 2),
+	imx25_mxc_pwm_data_entry(2, 3),
+	imx25_mxc_pwm_data_entry(3, 4),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_pwm_data imx27_mxc_pwm_data __initconst =
+	imx_mxc_pwm_data_entry_single(MX27, 0, , SZ_4K);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+struct platform_device *__init imx_add_mxc_pwm(
+		const struct imx_mxc_pwm_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + data->iosize - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("mxc_pwm", data->id,
+			res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_rnga.c b/arch/arm/plat-mxc/devices/platform-mxc_rnga.c
new file mode 100644
index 00000000000..b4b7612b6e1
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_rnga.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+struct imx_mxc_rnga_data {
+	resource_size_t iobase;
+};
+
+#define imx_mxc_rnga_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _RNGA_BASE_ADDR,			\
+	}
+
+#ifdef CONFIG_SOC_IMX31
+static const struct imx_mxc_rnga_data imx31_mxc_rnga_data __initconst =
+	imx_mxc_rnga_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+static struct platform_device *__init imx_add_mxc_rnga(
+		const struct imx_mxc_rnga_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+	return imx_add_platform_device("mxc_rnga", -1,
+			res, ARRAY_SIZE(res), NULL, 0);
+}
+
+static int __init imxXX_add_mxc_rnga(void)
+{
+	struct platform_device *ret;
+
+#if defined(CONFIG_SOC_IMX31)
+	if (cpu_is_mx31())
+		ret = imx_add_mxc_rnga(&imx31_mxc_rnga_data);
+	else
+#endif /* if defined(CONFIG_SOC_IMX31) */
+		ret = ERR_PTR(-ENODEV);
+
+	if (IS_ERR(ret))
+		return PTR_ERR(ret);
+
+	return 0;
+}
+arch_initcall(imxXX_add_mxc_rnga);
diff --git a/arch/arm/plat-mxc/devices/platform-mxc_w1.c b/arch/arm/plat-mxc/devices/platform-mxc_w1.c
new file mode 100644
index 00000000000..96fa5ea91fe
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-mxc_w1.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2010 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_mxc_w1_data_entry_single(soc)				\
+	{								\
+		.iobase = soc ## _OWIRE_BASE_ADDR,			\
+	}
+
+#ifdef CONFIG_SOC_IMX21
+const struct imx_mxc_w1_data imx21_mxc_w1_data __initconst =
+	imx_mxc_w1_data_entry_single(MX21);
+#endif /* ifdef CONFIG_SOC_IMX21 */
+
+#ifdef CONFIG_SOC_IMX27
+const struct imx_mxc_w1_data imx27_mxc_w1_data __initconst =
+	imx_mxc_w1_data_entry_single(MX27);
+#endif /* ifdef CONFIG_SOC_IMX27 */
+
+#ifdef CONFIG_SOC_IMX31
+const struct imx_mxc_w1_data imx31_mxc_w1_data __initconst =
+	imx_mxc_w1_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_mxc_w1_data imx35_mxc_w1_data __initconst =
+	imx_mxc_w1_data_entry_single(MX35);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+struct platform_device *__init imx_add_mxc_w1(
+		const struct imx_mxc_w1_data *data)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		},
+	};
+
+	return imx_add_platform_device("mxc_w1", 0,
+			res, ARRAY_SIZE(res), NULL, 0);
+}
diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
new file mode 100644
index 00000000000..b3525648a01
--- /dev/null
+++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+#include <mach/esdhc.h>
+
+#define imx_sdhci_esdhc_imx_data_entry_single(soc, _id, hwid) \
+	{								\
+		.id = _id,						\
+		.iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR,	\
+		.irq = soc ## _INT_ESDHC ## hwid,			\
+	}
+
+#define imx_sdhci_esdhc_imx_data_entry(soc, id, hwid)	\
+	[id] = imx_sdhci_esdhc_imx_data_entry_single(soc, id, hwid)
+
+#ifdef CONFIG_SOC_IMX25
+const struct imx_sdhci_esdhc_imx_data
+imx25_sdhci_esdhc_imx_data[] __initconst = {
+#define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
+	imx_sdhci_esdhc_imx_data_entry(MX25, _id, _hwid)
+	imx25_sdhci_esdhc_imx_data_entry(0, 1),
+	imx25_sdhci_esdhc_imx_data_entry(1, 2),
+};
+#endif /* ifdef CONFIG_SOC_IMX25 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_sdhci_esdhc_imx_data
+imx35_sdhci_esdhc_imx_data[] __initconst = {
+#define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
+	imx_sdhci_esdhc_imx_data_entry(MX35, _id, _hwid)
+	imx35_sdhci_esdhc_imx_data_entry(0, 1),
+	imx35_sdhci_esdhc_imx_data_entry(1, 2),
+	imx35_sdhci_esdhc_imx_data_entry(2, 3),
+};
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
+#ifdef CONFIG_SOC_IMX51
+const struct imx_sdhci_esdhc_imx_data
+imx51_sdhci_esdhc_imx_data[] __initconst = {
+#define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid)			\
+	imx_sdhci_esdhc_imx_data_entry(MX51, _id, _hwid)
+	imx51_sdhci_esdhc_imx_data_entry(0, 1),
+	imx51_sdhci_esdhc_imx_data_entry(1, 2),
+	imx51_sdhci_esdhc_imx_data_entry(2, 3),
+	imx51_sdhci_esdhc_imx_data_entry(3, 4),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
+struct platform_device *__init imx_add_sdhci_esdhc_imx(
+		const struct imx_sdhci_esdhc_imx_data *data,
+		const struct esdhc_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_16K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device("sdhci-esdhc-imx", data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+}
diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c
index e48340ec331..8ea49adcdfc 100644
--- a/arch/arm/plat-mxc/devices/platform-spi_imx.c
+++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c
@@ -27,9 +27,10 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
 	imx_spi_imx_data_entry(MX21, CSPI, "imx21-cspi", _id, _hwid, SZ_4K)
 	imx21_cspi_data_entry(0, 1),
 	imx21_cspi_data_entry(1, 2),
+};
 #endif
 
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
 const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
 #define imx25_cspi_data_entry(_id, _hwid)				\
 	imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K)
@@ -37,7 +38,7 @@ const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
 	imx25_cspi_data_entry(1, 2),
 	imx25_cspi_data_entry(2, 3),
 };
-#endif /* ifdef CONFIG_ARCH_MX25 */
+#endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
@@ -49,7 +50,7 @@ const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
-#ifdef CONFIG_ARCH_MX31
+#ifdef CONFIG_SOC_IMX31
 const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
 #define imx31_cspi_data_entry(_id, _hwid)				\
 	imx_spi_imx_data_entry(MX31, CSPI, "imx31-cspi", _id, _hwid, SZ_4K)
@@ -57,18 +58,18 @@ const struct imx_spi_imx_data imx31_cspi_data[] __initconst = {
 	imx31_cspi_data_entry(1, 2),
 	imx31_cspi_data_entry(2, 3),
 };
-#endif /* ifdef CONFIG_ARCH_MX31 */
+#endif /* ifdef CONFIG_SOC_IMX31 */
 
-#ifdef CONFIG_ARCH_MX35
+#ifdef CONFIG_SOC_IMX35
 const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
 #define imx35_cspi_data_entry(_id, _hwid)                           \
 	imx_spi_imx_data_entry(MX35, CSPI, "imx35-cspi", _id, _hwid, SZ_4K)
 	imx35_cspi_data_entry(0, 1),
 	imx35_cspi_data_entry(1, 2),
 };
-#endif /* ifdef CONFIG_ARCH_MX35 */
+#endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
 const struct imx_spi_imx_data imx51_cspi_data __initconst =
 	imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 0, , SZ_4K);
 
@@ -78,7 +79,7 @@ const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = {
 	imx51_ecspi_data_entry(0, 1),
 	imx51_ecspi_data_entry(1, 2),
 };
-#endif /* ifdef CONFIG_ARCH_MX51 */
+#endif /* ifdef CONFIG_SOC_IMX51 */
 
 struct platform_device *__init imx_add_spi_imx(
 		const struct imx_spi_imx_data *data,
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 9915607683d..8772ce346a5 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -49,6 +49,7 @@
 
 #define MXC_OTG_OFFSET		0
 #define MXC_H1_OFFSET		0x200
+#define MXC_H2_OFFSET		0x400
 
 /* USB_CTRL */
 #define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
@@ -61,6 +62,11 @@
 #define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
 #define MXC_H1_OC_DIS_BIT			(1 << 5)	/* UH1 Disable Overcurrent Event */
 
+/* USBH2CTRL */
+#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
+#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
+#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
+
 #define MXC_USBCMD_OFFSET			0x140
 
 /* USBCMD */
@@ -69,9 +75,9 @@
 int mxc_initialize_usb_hw(int port, unsigned int flags)
 {
 	unsigned int v;
-#if defined(CONFIG_ARCH_MX25)
+#if defined(CONFIG_SOC_IMX25)
 	if (cpu_is_mx25()) {
-		v = readl(MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
+		v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 
 		switch (port) {
@@ -108,14 +114,14 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 			return -EINVAL;
 		}
 
-		writel(v, MX25_IO_ADDRESS(MX25_OTG_BASE_ADDR +
+		writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 		return 0;
 	}
-#endif /* CONFIG_ARCH_MX25 */
+#endif /* if defined(CONFIG_SOC_IMX25) */
 #if defined(CONFIG_ARCH_MX3)
 	if (cpu_is_mx31()) {
-		v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
+		v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 
 		switch (port) {
@@ -153,13 +159,13 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 			return -EINVAL;
 		}
 
-		writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
+		writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 		return 0;
 	}
 
 	if (cpu_is_mx35()) {
-		v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+		v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 
 		switch (port) {
@@ -196,7 +202,7 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 			return -EINVAL;
 		}
 
-		writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+		writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 		return 0;
 	}
@@ -206,7 +212,7 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 		/* On i.MX27 we can use the i.MX31 USBCTRL bits, they
 		 * are identical
 		 */
-		v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+		v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 		switch (port) {
 		case 0:	/* OTG port */
@@ -241,12 +247,12 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 		default:
 			return -EINVAL;
 		}
-		writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
+		writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 		return 0;
 	}
 #endif /* CONFIG_MACH_MX27 */
-#ifdef CONFIG_ARCH_MX51
+#ifdef CONFIG_SOC_IMX51
 	if (cpu_is_mx51()) {
 		void __iomem *usb_base;
 		void __iomem *usbotg_base;
@@ -254,6 +260,10 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 		int ret = 0;
 
 		usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+		if (!usb_base) {
+			printk(KERN_ERR "%s(): ioremap failed\n", __func__);
+			return -ENOMEM;
+		}
 
 		switch (port) {
 		case 0:	/* OTG port */
@@ -262,6 +272,9 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 		case 1:	/* Host 1 port */
 			usbotg_base = usb_base + MXC_H1_OFFSET;
 			break;
+		case 2: /* Host 2 port */
+			usbotg_base = usb_base + MXC_H2_OFFSET;
+			break;
 		default:
 			printk(KERN_ERR"%s no such port %d\n", __func__, port);
 			ret = -ENOENT;
@@ -274,10 +287,13 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 			if (flags & MXC_EHCI_INTERNAL_PHY) {
 				v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 
-				if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-					v |= (MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is not used */
-				else
-					v &= ~(MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is used */
+				if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
+					/* OC/USBPWR is not used */
+					v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
+				} else {
+					/* OC/USBPWR is used */
+					v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+				}
 				__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 
 				v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
@@ -285,16 +301,23 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 					v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
 				else
 					v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
+				if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+					v |= MXC_OTG_UCTRL_OPM_BIT;
+				else
+					v &= ~MXC_OTG_UCTRL_OPM_BIT;
 				__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 			}
 			break;
 		case 1:	/* Host 1 */
 			/*Host ULPI */
 			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED)
-				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
-			else
-				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
+			if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+				/* HOST1 wakeup/ULPI intr enable */
+				v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+			} else {
+				/* HOST1 wakeup/ULPI intr disable */
+				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+			}
 
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 				v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
@@ -315,6 +338,22 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 				v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
 			__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
 			break;
+		case 2: /* Host 2 ULPI */
+			v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
+			if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+				/* HOST1 wakeup/ULPI intr enable */
+				v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
+			} else {
+				/* HOST1 wakeup/ULPI intr disable */
+				v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
+			}
+
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+			else
+				v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
+			__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
+			break;
 		}
 
 error:
diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c
index ee9582f4972..d69d343ff61 100644
--- a/arch/arm/plat-mxc/epit.c
+++ b/arch/arm/plat-mxc/epit.c
@@ -93,7 +93,6 @@ static struct clocksource clocksource_epit = {
 	.rating		= 200,
 	.read		= epit_read,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -101,9 +100,7 @@ static int __init epit_clocksource_init(struct clk *timer_clk)
 {
 	unsigned int c = clk_get_rate(timer_clk);
 
-	clocksource_epit.mult = clocksource_hz2mult(c,
-					clocksource_epit.shift);
-	clocksource_register(&clocksource_epit);
+	clocksource_register_hz(&clocksource_epit, c);
 
 	return 0;
 }
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 9c3e36232b5..bc2c7bc6f10 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -175,7 +175,7 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
 	u32 irq_stat;
-	struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
+	struct mxc_gpio_port *port = get_irq_data(irq);
 
 	irq_stat = __raw_readl(port->base + GPIO_ISR) &
 			__raw_readl(port->base + GPIO_IMR);
@@ -188,7 +188,7 @@ static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
 	int i;
 	u32 irq_msk, irq_stat;
-	struct mxc_gpio_port *port = (struct mxc_gpio_port *)get_irq_data(irq);
+	struct mxc_gpio_port *port = get_irq_data(irq);
 
 	/* walk through all interrupt status registers */
 	for (i = 0; i < gpio_table_size; i++) {
@@ -349,3 +349,113 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 
 	return 0;
 }
+
+#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high)	\
+	{								\
+		.chip.label = "gpio-" #_id,				\
+		.irq = _irq,						\
+		.irq_high = _irq_high,					\
+		.base = soc ## _IO_ADDRESS(				\
+				soc ## _GPIO ## _hwid ## _BASE_ADDR),	\
+		.virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32,	\
+	}
+
+#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq)			\
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0)
+#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid)				\
+	DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0)
+
+#define DEFINE_REGISTER_FUNCTION(prefix)				\
+int __init prefix ## _register_gpios(void)				\
+{									\
+	return mxc_gpio_init(prefix ## _gpio_ports,			\
+			ARRAY_SIZE(prefix ## _gpio_ports));		\
+}
+
+#if defined(CONFIG_SOC_IMX1)
+static struct mxc_gpio_port imx1_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD),
+};
+
+DEFINE_REGISTER_FUNCTION(imx1)
+
+#endif /* if defined(CONFIG_SOC_IMX1) */
+
+#if defined(CONFIG_SOC_IMX21)
+static struct mxc_gpio_port imx21_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO),
+	DEFINE_IMX_GPIO_PORT(MX21, 1, 2),
+	DEFINE_IMX_GPIO_PORT(MX21, 2, 3),
+	DEFINE_IMX_GPIO_PORT(MX21, 3, 4),
+	DEFINE_IMX_GPIO_PORT(MX21, 4, 5),
+	DEFINE_IMX_GPIO_PORT(MX21, 5, 6),
+};
+
+DEFINE_REGISTER_FUNCTION(imx21)
+
+#endif /* if defined(CONFIG_SOC_IMX21) */
+
+#if defined(CONFIG_SOC_IMX25)
+static struct mxc_gpio_port imx25_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4),
+};
+
+DEFINE_REGISTER_FUNCTION(imx25)
+
+#endif /* if defined(CONFIG_SOC_IMX25) */
+
+#if defined(CONFIG_SOC_IMX27)
+static struct mxc_gpio_port imx27_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO),
+	DEFINE_IMX_GPIO_PORT(MX27, 1, 2),
+	DEFINE_IMX_GPIO_PORT(MX27, 2, 3),
+	DEFINE_IMX_GPIO_PORT(MX27, 3, 4),
+	DEFINE_IMX_GPIO_PORT(MX27, 4, 5),
+	DEFINE_IMX_GPIO_PORT(MX27, 5, 6),
+};
+
+DEFINE_REGISTER_FUNCTION(imx27)
+
+#endif /* if defined(CONFIG_SOC_IMX27) */
+
+#if defined(CONFIG_SOC_IMX31)
+static struct mxc_gpio_port imx31_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3),
+};
+
+DEFINE_REGISTER_FUNCTION(imx31)
+
+#endif /* if defined(CONFIG_SOC_IMX31) */
+
+#if defined(CONFIG_SOC_IMX35)
+static struct mxc_gpio_port imx35_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2),
+	DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3),
+};
+
+DEFINE_REGISTER_FUNCTION(imx35)
+
+#endif /* if defined(CONFIG_SOC_IMX35) */
+
+#if defined(CONFIG_SOC_IMX50)
+static struct mxc_gpio_port imx50_gpio_ports[] = {
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH),
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH),
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+	DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH),
+};
+
+DEFINE_REGISTER_FUNCTION(imx50)
+
+#endif /* if defined(CONFIG_SOC_IMX50) */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 7a1e1f89ff0..aea2cd3b6d1 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -20,7 +20,9 @@ extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
+extern void mx50_map_io(void);
 extern void mx51_map_io(void);
+extern void mx53_map_io(void);
 extern void mxc91231_map_io(void);
 extern void mxc_init_irq(void __iomem *);
 extern void tzic_init_irq(void __iomem *);
@@ -30,7 +32,9 @@ extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
+extern void mx50_init_irq(void);
 extern void mx51_init_irq(void);
+extern void mx53_init_irq(void);
 extern void mxc91231_init_irq(void);
 extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
@@ -42,6 +46,8 @@ extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
 extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
+extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
+			unsigned long ckih1, unsigned long ckih2);
 extern int mxc91231_clocks_init(unsigned long fref);
 extern int mxc_register_gpios(void);
 extern int mxc_register_device(struct platform_device *pdev, void *data);
@@ -50,5 +56,6 @@ extern void mxc_arch_reset_init(void __iomem *);
 extern void mxc91231_power_off(void);
 extern void mxc91231_arch_reset(int, const char *);
 extern void mxc91231_prepare_idle(void);
-
+extern void mx51_efikamx_reset(void);
+extern int mx53_revision(void);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index d56213fb901..3b3a37c25c5 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -10,58 +10,49 @@
  * published by the Free Software Foundation.
  *
  */
-#define IMX_NEEDS_DEPRECATED_SYMBOLS
+#include <mach/hardware.h>
 
 #ifdef CONFIG_ARCH_MX1
-#include <mach/mx1.h>
-#define UART_PADDR	UART1_BASE_ADDR
-#define UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR	MX1_UART1_BASE_ADDR
 #endif
 
 #ifdef CONFIG_ARCH_MX25
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#include <mach/mx25.h>
 #define UART_PADDR	MX25_UART1_BASE_ADDR
-#define UART_VADDR	MX25_AIPS1_IO_ADDRESS(MX25_UART1_BASE_ADDR)
 #endif
 
 #ifdef CONFIG_ARCH_MX2
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#include <mach/mx2x.h>
-#define UART_PADDR	UART1_BASE_ADDR
-#define UART_VADDR	AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR	MX2x_UART1_BASE_ADDR
 #endif
 
 #ifdef CONFIG_ARCH_MX3
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#include <mach/mx3x.h>
-#define UART_PADDR	UART1_BASE_ADDR
-#define UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+#define UART_PADDR	MX3x_UART1_BASE_ADDR
 #endif
 
 #ifdef CONFIG_ARCH_MX5
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#include <mach/mx51.h>
 #define UART_PADDR	MX51_UART1_BASE_ADDR
-#define UART_VADDR	MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
 #endif
 
 #ifdef CONFIG_ARCH_MXC91231
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
-#include <mach/mxc91231.h>
 #define UART_PADDR	MXC91231_UART2_BASE_ADDR
-#define UART_VADDR	MXC91231_IO_ADDRESS(MXC91231_UART2_BASE_ADDR)
 #endif
+
+#define UART_VADDR	IMX_IO_ADDRESS(UART_PADDR)
+
 		.macro	addruart, rp, rv
 		ldr	\rp, =UART_PADDR	@ physical
 		ldr	\rv, =UART_VADDR	@ virtual
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index 8c6896fd1e5..8658c9caa65 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -10,9 +10,19 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 
-struct platform_device *imx_add_platform_device(const char *name, int id,
+struct platform_device *imx_add_platform_device_dmamask(
+		const char *name, int id,
 		const struct resource *res, unsigned int num_resources,
-		const void *data, size_t size_data);
+		const void *data, size_t size_data, u64 dmamask);
+
+static inline struct platform_device *imx_add_platform_device(
+		const char *name, int id,
+		const struct resource *res, unsigned int num_resources,
+		const void *data, size_t size_data)
+{
+	return imx_add_platform_device_dmamask(
+			name, id, res, num_resources, data, size_data, 0);
+}
 
 #include <linux/fec.h>
 struct imx_fec_data {
@@ -24,15 +34,63 @@ struct platform_device *__init imx_add_fec(
 		const struct fec_platform_data *pdata);
 
 #include <linux/can/platform/flexcan.h>
-struct platform_device *__init imx_add_flexcan(int id,
-		resource_size_t iobase, resource_size_t iosize,
-		resource_size_t irq,
+struct imx_flexcan_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_flexcan(
+		const struct imx_flexcan_data *data,
 		const struct flexcan_platform_data *pdata);
 
+#include <linux/fsl_devices.h>
+struct imx_fsl_usb2_udc_data {
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_fsl_usb2_udc(
+		const struct imx_fsl_usb2_udc_data *data,
+		const struct fsl_usb2_platform_data *pdata);
+
 #include <linux/gpio_keys.h>
 struct platform_device *__init imx_add_gpio_keys(
 		const struct gpio_keys_platform_data *pdata);
 
+#include <mach/mx21-usbhost.h>
+struct imx_imx21_hcd_data {
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx21_hcd(
+		const struct imx_imx21_hcd_data *data,
+		const struct mx21_usbh_platform_data *pdata);
+
+struct imx_imx2_wdt_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+};
+struct platform_device *__init imx_add_imx2_wdt(
+		const struct imx_imx2_wdt_data *data);
+
+struct imx_imxdi_rtc_data {
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imxdi_rtc(
+		const struct imx_imxdi_rtc_data *data);
+
+#include <mach/imxfb.h>
+struct imx_imx_fb_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_fb(
+		const struct imx_imx_fb_data *data,
+		const struct imx_fb_platform_data *pdata);
+
 #include <mach/i2c.h>
 struct imx_imx_i2c_data {
 	int id;
@@ -44,6 +102,16 @@ struct platform_device *__init imx_add_imx_i2c(
 		const struct imx_imx_i2c_data *data,
 		const struct imxi2c_platform_data *pdata);
 
+#include <linux/input/matrix_keypad.h>
+struct imx_imx_keypad_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_imx_keypad(
+		const struct imx_imx_keypad_data *data,
+		const struct matrix_keymap_data *pdata);
+
 #include <mach/ssi.h>
 struct imx_imx_ssi_data {
 	int id;
@@ -82,6 +150,67 @@ struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata);
 
+#include <mach/usb.h>
+struct imx_imx_udc_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq0;
+	resource_size_t irq1;
+	resource_size_t irq2;
+	resource_size_t irq3;
+	resource_size_t irq4;
+	resource_size_t irq5;
+	resource_size_t irq6;
+};
+struct platform_device *__init imx_add_imx_udc(
+		const struct imx_imx_udc_data *data,
+		const struct imxusb_platform_data *pdata);
+
+#include <mach/mx1_camera.h>
+struct imx_mx1_camera_data {
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mx1_camera(
+		const struct imx_mx1_camera_data *data,
+		const struct mx1_camera_pdata *pdata);
+
+#include <mach/mx2_cam.h>
+struct imx_mx2_camera_data {
+	resource_size_t iobasecsi;
+	resource_size_t iosizecsi;
+	resource_size_t irqcsi;
+	resource_size_t iobaseemmaprp;
+	resource_size_t iosizeemmaprp;
+	resource_size_t irqemmaprp;
+};
+struct platform_device *__init imx_add_mx2_camera(
+		const struct imx_mx2_camera_data *data,
+		const struct mx2_camera_platform_data *pdata);
+
+#include <mach/mxc_ehci.h>
+struct imx_mxc_ehci_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_mxc_ehci(
+		const struct imx_mxc_ehci_data *data,
+		const struct mxc_usbh_platform_data *pdata);
+
+#include <mach/mmc.h>
+struct imx_mxc_mmc_data {
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	resource_size_t irq;
+	resource_size_t dmareq;
+};
+struct platform_device *__init imx_add_mxc_mmc(
+		const struct imx_mxc_mmc_data *data,
+		const struct imxmmc_platform_data *pdata);
+
 #include <mach/mxc_nand.h>
 struct imx_mxc_nand_data {
 	/*
@@ -99,24 +228,39 @@ struct platform_device *__init imx_add_mxc_nand(
 		const struct imx_mxc_nand_data *data,
 		const struct mxc_nand_platform_data *pdata);
 
-#include <mach/spi.h>
-struct imx_spi_imx_data {
-	const char *devid;
+struct imx_mxc_pwm_data {
 	int id;
 	resource_size_t iobase;
 	resource_size_t iosize;
-	int irq;
+	resource_size_t irq;
 };
-struct platform_device *__init imx_add_spi_imx(
-		const struct imx_spi_imx_data *data,
-		const struct spi_imx_master *pdata);
+struct platform_device *__init imx_add_mxc_pwm(
+		const struct imx_mxc_pwm_data *data);
+
+struct imx_mxc_w1_data {
+	resource_size_t iobase;
+};
+struct platform_device *__init imx_add_mxc_w1(
+		const struct imx_mxc_w1_data *data);
 
 #include <mach/esdhc.h>
-struct imx_esdhc_imx_data {
+struct imx_sdhci_esdhc_imx_data {
 	int id;
 	resource_size_t iobase;
 	resource_size_t irq;
 };
-struct platform_device *__init imx_add_esdhc(
-		const struct imx_esdhc_imx_data *data,
+struct platform_device *__init imx_add_sdhci_esdhc_imx(
+		const struct imx_sdhci_esdhc_imx_data *data,
 		const struct esdhc_platform_data *pdata);
+
+#include <mach/spi.h>
+struct imx_spi_imx_data {
+	const char *devid;
+	int id;
+	resource_size_t iobase;
+	resource_size_t iosize;
+	int irq;
+};
+struct platform_device *__init imx_add_spi_imx(
+		const struct imx_spi_imx_data *data,
+		const struct spi_imx_master *pdata);
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index aeb08697726..bd9bb979914 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -54,15 +54,15 @@
 #elif defined CONFIG_MXC_TZIC
 	@ Load offset & priority of the highest priority
 	@ interrupt pending.
+	@ 0x080 is INTSEC0 register
 	@ 0xD80 is HIPND0 register
 	mov     \irqnr, #0
-	mov     \irqstat, #0x0D80
-1000:
-	ldr     \tmp,   [\irqstat, \base]
-	cmp     \tmp, #0
-	bne     1001f
-	addeq   \irqnr, \irqnr, #32
-	addeq   \irqstat, \irqstat, #4
+1000:	add	\irqstat, \base, \irqnr, lsr #3
+	ldr	\tmp, [\irqstat, #0xd80]
+	ldr	\irqstat, [\irqstat, #0x080]
+	ands	\tmp, \tmp, \irqstat
+	bne	1001f
+	add	\irqnr, \irqnr, #32
 	cmp     \irqnr, #128
 	blo     1000b
 	b       2001f
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index af33b74f569..0044e2f1bea 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -23,6 +23,11 @@
 #include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 
+
+/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* range e.g. GPIO_1_5 is gpio 5 under linux */
+#define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
+
 /* use gpiolib dispatchers */
 #define gpio_get_value		__gpio_get_value
 #define gpio_set_value		__gpio_set_value
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index ebadf4ac43f..26bb1bab4ae 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -22,13 +22,92 @@
 
 #include <asm/sizes.h>
 
-#define IMX_IO_ADDRESS(addr, module)					\
-	((void __force __iomem *)					\
-	 (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
-	 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
+#ifdef __ASSEMBLER__
+#define IOMEM(addr)	(addr)
+#else
+#define IOMEM(addr)	((void __force __iomem *)(addr))
+#endif
+
+#define IMX_IO_P2V_MODULE(addr, module)					\
+	(((addr) - module ## _BASE_ADDR) < module ## _SIZE ?		\
+	 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0)
+
+/*
+ * This is rather complicated for humans and ugly to verify, but for a machine
+ * it's OK.  Still more as it is usually only applied to constants.  The upsides
+ * on using this approach are:
+ *
+ *  - same mapping on all i.MX machines
+ *  - works for assembler, too
+ *  - no need to nurture #defines for virtual addresses
+ *
+ * The downside it, it's hard to verify (but I have a script for that).
+ *
+ * Obviously this needs to be injective for each SoC.  In general it maps the
+ * whole address space to [0xf4000000, 0xf5ffffff].  So [0xf6000000,0xfeffffff]
+ * is free for per-machine use (e.g. KZM_ARM11_01 uses 64MiB there).
+ *
+ * It applies the following mappings for the different SoCs:
+ *
+ * mx1:
+ *	IO	0x00200000+0x100000	->	0xf4000000+0x100000
+ * mx21:
+ *	AIPI	0x10000000+0x100000	->	0xf4400000+0x100000
+ *	SAHB1	0x80000000+0x100000	->	0xf4000000+0x100000
+ *	X_MEMC	0xdf000000+0x004000	->	0xf5f00000+0x004000
+ * mx25:
+ *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
+ *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
+ * mx27:
+ *	AIPI	0x10000000+0x100000	->	0xf4400000+0x100000
+ *	SAHB1	0x80000000+0x100000	->	0xf4000000+0x100000
+ *	X_MEMC	0xd8000000+0x100000	->	0xf5c00000+0x100000
+ * mx31:
+ *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
+ *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
+ *	X_MEMC	0xb8000000+0x010000	->	0xf4c00000+0x010000
+ *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
+ * mx35:
+ *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
+ *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
+ *	X_MEMC	0xb8000000+0x010000	->	0xf4c00000+0x010000
+ *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
+ * mx50:
+ *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
+ *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
+ *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
+ * mx51:
+ *	IRAM	0x1ffe0000+0x020000	->	0xf4fe0000+0x020000
+ *	DEBUG	0x60000000+0x100000	->	0xf5000000+0x100000
+ *	SPBA0	0x70000000+0x100000	->	0xf5400000+0x100000
+ *	AIPS1	0x73f00000+0x100000	->	0xf5700000+0x100000
+ *	AIPS2	0x83f00000+0x100000	->	0xf4300000+0x100000
+ * mxc91231:
+ *	L2CC	0x30000000+0x010000	->	0xf4400000+0x010000
+ *	X_MEMC	0xb8000000+0x010000	->	0xf4c00000+0x010000
+ *	ROMP	0x60000000+0x010000	->	0xf5000000+0x010000
+ *	AVIC	0x68000000+0x010000	->	0xf5800000+0x010000
+ *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
+ *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
+ *	SPBA1	0x52000000+0x100000	->	0xf5600000+0x100000
+ *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
+ */
+#define IMX_IO_P2V(x)	(						\
+			0xf4000000 +					\
+			(((x) & 0x50000000) >> 6) +			\
+			(((x) & 0x0b000000) >> 4) +			\
+			(((x) & 0x000fffff)))
+
+#define IMX_IO_ADDRESS(x)	IOMEM(IMX_IO_P2V(x))
 
 #ifdef CONFIG_ARCH_MX5
+#include <mach/mx50.h>
 #include <mach/mx51.h>
+#include <mach/mx53.h>
 #endif
 
 #ifdef CONFIG_ARCH_MX3
@@ -61,4 +140,11 @@
 
 #include <mach/mxc.h>
 
+#define imx_map_entry(soc, name, _type)	{				\
+	.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),	\
+	.pfn = __phys_to_pfn(soc ## _ ## name ## _BASE_ADDR),		\
+	.length = soc ## _ ## name ## _SIZE,				\
+	.type = _type,							\
+}
+
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
index 5263506b7dd..9de8f062ad5 100644
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ b/arch/arm/plat-mxc/include/mach/imxfb.h
@@ -1,6 +1,8 @@
 /*
  * This structure describes the machine which we are running on.
  */
+#ifndef __MACH_IMXFB_H__
+#define __MACH_IMXFB_H__
 
 #include <linux/fb.h>
 
@@ -79,3 +81,4 @@ struct imx_fb_platform_data {
 };
 
 void set_imx_fb_info(struct imx_fb_platform_data *);
+#endif /* ifndef __MACH_IMXFB_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx50.h b/arch/arm/plat-mxc/include/mach/iomux-mx50.h
new file mode 100644
index 00000000000..058a922ca14
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx50.h
@@ -0,0 +1,977 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_IOMUX_MX50_H__
+#define __MACH_IOMUX_MX50_H__
+
+#include <mach/iomux-v3.h>
+
+#define MX50_ELCDIF_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
+
+#define MX50_SD_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+					PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH)
+
+#define MX50_UART_PAD_CTRL	(PAD_CTL_DSE_HIGH | PAD_CTL_PKE)
+
+#define MX50_I2C_PAD_CTRL	(PAD_CTL_ODE | PAD_CTL_DSE_HIGH | \
+					PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
+
+#define MX50_USB_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_PUE | \
+					PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP)
+
+#define MX50_FEC_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+					PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | \
+					PAD_CTL_DSE_HIGH)
+
+#define MX50_OWIRE_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+					PAD_CTL_PUS_100K_UP | PAD_CTL_ODE | \
+					PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
+
+#define MX50_KEYPAD_CTRL        (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
+					PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_HIGH)
+
+#define MX50_CSPI_SS_PAD	(PAD_CTL_PKE | PAD_CTL_PUE | \
+					PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_COL0__KEY_COL0	IOMUX_PAD(0x2CC, 0x20, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL0__GPIO_4_0	IOMUX_PAD(0x2CC, 0x20, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL0__NANDF_CLE	IOMUX_PAD(0x2CC, 0x20, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_ROW0__KEY_ROW0	IOMUX_PAD(0x2D0, 0x24, 0, 0x0, 0, MX50_KEYPAD_CTRL)
+#define MX50_PAD_KEY_ROW0__GPIO_4_1	IOMUX_PAD(0x2D0, 0x24, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_ROW0__NANDF_ALE	IOMUX_PAD(0x2D0, 0x24, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_COL1__KEY_COL1	IOMUX_PAD(0x2D4, 0x28, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL1__GPIO_4_2	IOMUX_PAD(0x2D4, 0x28, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL1__NANDF_CE0	IOMUX_PAD(0x2D4, 0x28, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_ROW1__KEY_ROW1	IOMUX_PAD(0x2D8, 0x2C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
+#define MX50_PAD_KEY_ROW1__GPIO_4_3	IOMUX_PAD(0x2D8, 0x2C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_ROW1__NANDF_CE1	IOMUX_PAD(0x2D8, 0x2C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_COL2__KEY_COL2	IOMUX_PAD(0x2DC, 0x30, 0, 0x0, 0, MX50_KEYPAD_CTRL)
+#define MX50_PAD_KEY_COL2__GPIO_4_4	IOMUX_PAD(0x2DC, 0x30, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL2__NANDF_CE2	IOMUX_PAD(0x2DC, 0x30, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_ROW2__KEY_ROW2	IOMUX_PAD(0x2E0, 0x34, 0, 0x0, 0, MX50_KEYPAD_CTRL)
+#define MX50_PAD_KEY_ROW2__GPIO_4_5	IOMUX_PAD(0x2E0, 0x34, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_ROW2__NANDF_CE3	IOMUX_PAD(0x2E0, 0x34, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_KEY_COL3__KEY_COL3	IOMUX_PAD(0x2E4, 0x38, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL3__GPIO_4_6	IOMUX_PAD(0x2E4, 0x38, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_COL3__NANDF_READY	IOMUX_PAD(0x2E4, 0x38, 2, 0x7b4, 0, PAD_CTL_PKE | \
+							PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define MX50_PAD_KEY_COL3__SDMA_EXT0	IOMUX_PAD(0x2E4, 0x38, 6, 0x7b8, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_KEY_ROW3__KEY_ROW3	IOMUX_PAD(0x2E8, 0x3C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
+#define MX50_PAD_KEY_ROW3__GPIO_4_7	IOMUX_PAD(0x2E8, 0x3C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_KEY_ROW3__NANDF_DQS	IOMUX_PAD(0x2E8, 0x3C, 2, 0x7b0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_KEY_ROW3__SDMA_EXT1	IOMUX_PAD(0x2E8, 0x3C, 6, 0x7bc, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_I2C1_SCL__I2C1_SCL	IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C1_SCL__GPIO_6_18	IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C1_SCL__UART2_TXD	IOMUX_PAD(0x2EC, 0x40, 2, 0x7cc, 0, MX50_UART_PAD_CTRL)
+
+#define MX50_PAD_I2C1_SDA__I2C1_SDA	IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C1_SDA__GPIO_6_19	IOMUX_PAD(0x2F0, 0x44, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C1_SDA__UART2_RXD	IOMUX_PAD(0x2F0, 0x44, 2, 0x7cc, 1, MX50_UART_PAD_CTRL)
+
+#define MX50_PAD_I2C2_SCL__I2C2_SCL	IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C2_SCL__GPIO_6_20	IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C2_SCL__UART2_CTS	IOMUX_PAD(0x2F4, 0x48, 2, 0x7c8, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_I2C2_SCL__DCDC_OK	IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_I2C2_SDA__I2C2_SDA	IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C2_SDA__GPIO_6_21	IOMUX_PAD(0x2F8, 0x4C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C2_SDA__UART2_RTS	IOMUX_PAD(0x2F8, 0x4C, 2, 0x7c8, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_I2C2_SDA__PWRSTABLE	IOMUX_PAD(0x2F8, 0x4C, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_I2C3_SCL__I2C3_SCL	IOMUX_PAD(0x2FC, 0x50, IOMUX_CONFIG_SION, 0x0, 0, \
+							MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C3_SCL__GPIO_6_22	IOMUX_PAD(0x2FC, 0x50, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SCL__FEC_MDC	IOMUX_PAD(0x2FC, 0x50, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_I2C3_SCL__PMIC_RDY	IOMUX_PAD(0x2FC, 0x50, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SCL__GPT_CAPIN1	IOMUX_PAD(0x2FC, 0x50, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SCL__USBOTG_OC	IOMUX_PAD(0x2FC, 0x50, 7, 0x7E8, 0, MX50_USB_PAD_CTRL)
+
+#define MX50_PAD_I2C3_SDA__I2C3_SDA	IOMUX_PAD(0x300, 0x54, IOMUX_CONFIG_SION, 0x0, 0, \
+								MX50_I2C_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__GPIO_6_23	IOMUX_PAD(0x300, 0x54, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__FEC_MDIO	IOMUX_PAD(0x300, 0x54, 2, 0x774, 0, MX50_FEC_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__PWRFAIL_INT	IOMUX_PAD(0x300, 0x54, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__ALARM_DEB	IOMUX_PAD(0x300, 0x54, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__GPT_CAPIN1	IOMUX_PAD(0x300, 0x54, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_I2C3_SDA__USBOTG_PWR	IOMUX_PAD(0x300, 0x54, 7, 0x0, 0, \
+							PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_PWM1__PWM1_PWMO	IOMUX_PAD(0x304, 0x58, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM1__GPIO_6_24	IOMUX_PAD(0x304, 0x58, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM1__USBOTG_OC	IOMUX_PAD(0x304, 0x58, 2, 0x7E8, 1, MX50_USB_PAD_CTRL)
+#define MX50_PAD_PWM1__GPT_CMPOUT1	IOMUX_PAD(0x304, 0x58, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PWM2__PWM2_PWMO	IOMUX_PAD(0x308, 0x5C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM2__GPIO_6_25	IOMUX_PAD(0x308, 0x5C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM2__USBOTG_PWR	IOMUX_PAD(0x308, 0x5C, 2, 0x0, 0, \
+							PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
+#define MX50_PAD_PWM2__DCDC_PWM		IOMUX_PAD(0x308, 0x5C, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM2__GPT_CMPOUT2	IOMUX_PAD(0x308, 0x5C, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_PWM2__ANY_PU_RST	IOMUX_PAD(0x308, 0x5C, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_OWIRE__OWIRE		IOMUX_PAD(0x30C, 0x60, 0, 0x0, 0, MX50_OWIRE_PAD_CTRL)
+#define MX50_PAD_OWIRE__GPIO_6_26	IOMUX_PAD(0x30C, 0x60, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_OWIRE__USBH1_OC	IOMUX_PAD(0x30C, 0x60, 2, 0x0, 0, MX50_USB_PAD_CTRL)
+#define MX50_PAD_OWIRE__SSI_EXT1_CLK	IOMUX_PAD(0x30C, 0x60, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_OWIRE__EPDC_PWRIRQ	IOMUX_PAD(0x30C, 0x60, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_OWIRE__GPT_CMPOUT3	IOMUX_PAD(0x30C, 0x60, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPITO__EPITO		IOMUX_PAD(0x310, 0x64, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPITO__GPIO_6_27	IOMUX_PAD(0x310, 0x64, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPITO__USBH1_PWR	IOMUX_PAD(0x310, 0x64, 2, 0x0, 0, \
+							PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
+#define MX50_PAD_EPITO__SSI_EXT2_CLK	IOMUX_PAD(0x310, 0x64, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPITO__TOG_EN		IOMUX_PAD(0x310, 0x64, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPITO__GPT_CLKIN	IOMUX_PAD(0x310, 0x64, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_WDOG__WDOG		IOMUX_PAD(0x314, 0x68, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_WDOG__GPIO_6_28	IOMUX_PAD(0x314, 0x68, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_WDOG__WDOG_RST		IOMUX_PAD(0x314, 0x68, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_WDOG__XTAL32K		IOMUX_PAD(0x314, 0x68, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SSI_TXFS__SSI_TXFS	IOMUX_PAD(0x318, 0x6C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_TXFS__GPIO_6_0	IOMUX_PAD(0x318, 0x6C, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SSI_TXC__SSI_TXC	IOMUX_PAD(0x31C, 0x70, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_TXC__GPIO_6_1	IOMUX_PAD(0x31C, 0x70, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SSI_TXD__SSI_TXD	IOMUX_PAD(0x320, 0x74, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_TXD__GPIO_6_2	IOMUX_PAD(0x320, 0x74, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_TXD__CSPI_RDY	IOMUX_PAD(0x320, 0x74, 4, 0x6e8, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SSI_RXD__SSI_RXD	IOMUX_PAD(0x324, 0x78, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXD__GPIO_6_3	IOMUX_PAD(0x324, 0x78, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXD__CSPI_SS3	IOMUX_PAD(0x324, 0x78, 4, 0x6f4, 0, MX50_CSPI_SS_PAD)
+
+#define MX50_PAD_SSI_RXFS__AUD3_RXFS	IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXFS__GPIO_6_4	IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXFS__UART5_TXD	IOMUX_PAD(0x328, 0x7C, 2, 0x7e4, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_SSI_RXFS__WEIM_D6	IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXFS__CSPI_SS2	IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_SSI_RXFS__FEC_COL	IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SSI_RXFS__FEC_MDC	IOMUX_PAD(0x328, 0x7C, 6, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_SSI_RXC__AUD3_RXC	IOMUX_PAD(0x32C, 0x80, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXC__GPIO_6_5	IOMUX_PAD(0x32C, 0x80, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXC__UART5_RXD	IOMUX_PAD(0x32C, 0x80, 2, 0x7e4, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_SSI_RXC__WEIM_D7	IOMUX_PAD(0x32C, 0x80, 3, 0x808, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXC__CSPI_SS1	IOMUX_PAD(0x32C, 0x80, 4, 0x6ec, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_SSI_RXC__FEC_RX_CLK	IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL)
+#define MX50_PAD_SSI_RXC__FEC_MDIO	IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL)
+
+#define MX50_PAD_UART1_TXD__UART1_TXD	IOMUX_PAD(0x330, 0x84, 0, 0x7c4, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_TXD__GPIO_6_6	IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_UART1_RXD__UART1_RXD	IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_RXD__GPIO_6_7	IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_UART1_CTS__UART1_CTS	IOMUX_PAD(0x338, 0x8C, 0, 0x7c0, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_CTS__GPIO_6_8	IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART1_CTS__UART5_TXD	IOMUX_PAD(0x338, 0x8C, 2, 0x7e4, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_CTS__SD4_D4	IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART1_CTS__SD4_CMD	IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART1_RTS__UART1_RTS	IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_RTS__GPIO_6_9	IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART1_RTS__UART5_RXD	IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART1_RTS__SD4_D5	IOMUX_PAD(0x33C, 0x90, 4, 0x0, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART1_RTS__SD4_CLK	IOMUX_PAD(0x33C, 0x90, 5, 0x0, 1, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART2_TXD__UART2_TXD	IOMUX_PAD(0x340, 0x94, 0, 0x7cc, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART2_TXD__GPIO_6_10	IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART2_TXD__SD4_D6	IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART2_TXD__SD4_D4	IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART2_RXD__UART2_RXD	IOMUX_PAD(0x344, 0x98, 0, 0x7cc, 3, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART2_RXD__GPIO_6_11	IOMUX_PAD(0x344, 0x98, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART2_RXD__SD4_D7	IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART2_RXD__SD4_D5	IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x348, 0x9C, 0, 0x7c8, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART2_CTS__GPIO_6_12	IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART2_CTS__SD4_CMD	IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART2_CTS__SD4_D6	IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x34C, 0xA0, 0, 0x7c8, 3, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART2_RTS__GPIO_6_13	IOMUX_PAD(0x34C, 0xA0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART2_RTS__SD4_CLK	IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART2_RTS__SD4_D7	IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_UART3_TXD__UART3_TXD	IOMUX_PAD(0x350, 0xA4, 0, 0x7d4, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__GPIO_6_14	IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__SD1_D4	IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__SD4_D0	IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__SD2_WP	IOMUX_PAD(0x350, 0xA4, 5, 0x744, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_TXD__WEIM_D12	IOMUX_PAD(0x350, 0xA4, 6, 0x81c, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_UART3_RXD__UART3_RXD	IOMUX_PAD(0x354, 0xA8, 0, 0x7d4, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART3_RXD__GPIO_6_15	IOMUX_PAD(0x354, 0xA8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART3_RXD__SD1_D5	IOMUX_PAD(0x354, 0xA8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_RXD__SD4_D1	IOMUX_PAD(0x354, 0xA8, 4, 0x754, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_RXD__SD2_CD	IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART3_RXD__WEIM_D13	IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_UART4_TXD__UART4_TXD	IOMUX_PAD(0x358, 0xAC, 0, 0x7dc, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__GPIO_6_16	IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__UART3_CTS	IOMUX_PAD(0x358, 0xAC, 2, 0x7d0, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__SD1_D6	IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__SD4_D2	IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__SD2_LCTL	IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_TXD__WEIM_D14	IOMUX_PAD(0x358, 0xAC, 6, 0x824, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_UART4_RXD__UART4_RXD	IOMUX_PAD(0x35C, 0xB0, 0, 0x7dc, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__GPIO_6_17	IOMUX_PAD(0x35C, 0xB0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__UART3_RTS	IOMUX_PAD(0x35C, 0xB0, 2, 0x7d0, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__SD1_D7	IOMUX_PAD(0x35C, 0xB0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__SD4_D3	IOMUX_PAD(0x35C, 0xB0, 4, 0x75c, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__SD1_LCTL	IOMUX_PAD(0x35C, 0xB0, 5, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_UART4_RXD__WEIM_D15	IOMUX_PAD(0x35C, 0xB0, 6, 0x828, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_CSPI_SCLK__CSPI_SCLK	IOMUX_PAD(0x360, 0xB4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_CSPI_SCLK__GPIO_4_8	IOMUX_PAD(0x360, 0xB4, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_CSPI_MOSI__CSPI_MOSI	IOMUX_PAD(0x364, 0xB8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_CSPI_MOSI__GPIO_4_9	IOMUX_PAD(0x364, 0xB8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_CSPI_MISO__CSPI_MISO	IOMUX_PAD(0x368, 0xBC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_CSPI_MISO__GPIO_4_10	IOMUX_PAD(0x368, 0xBC, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_CSPI_SS0__CSPI_SS0	IOMUX_PAD(0x36C, 0xC0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_CSPI_SS0__GPIO_4_11	IOMUX_PAD(0x36C, 0xC0, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK	IOMUX_PAD(0x370, 0xC4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__GPIO_4_12		IOMUX_PAD(0x370, 0xC4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY		IOMUX_PAD(0x370, 0xC4, 2, 0x6e8, 1, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY	IOMUX_PAD(0x370, 0xC4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__UART3_RTS		IOMUX_PAD(0x370, 0xC4, 4, 0x7d0, 2, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE6	IOMUX_PAD(0x370, 0xC4, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SCLK__WEIM_D8		IOMUX_PAD(0x370, 0xC4, 7, 0x80c, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI	IOMUX_PAD(0x374, 0xC8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MOSI__GPIO_4_13		IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1		IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1	IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_MOSI__UART3_CTS		IOMUX_PAD(0x374, 0xC8, 4, 0x7d0, 3, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7	IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MOSI__WEIM_D9		IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO	IOMUX_PAD(0x378, 0xCC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MISO__GPIO_4_14		IOMUX_PAD(0x378, 0xCC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MISO__CSPI_SS2		IOMUX_PAD(0x378, 0xCC, 2, 0x6f0, 1, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2	IOMUX_PAD(0x378, 0xCC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_MISO__UART4_RTS		IOMUX_PAD(0x378, 0xCC, 4, 0x7d8, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE8	IOMUX_PAD(0x378, 0xCC, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_MISO__WEIM_D10		IOMUX_PAD(0x378, 0xCC, 7, 0x814, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0		IOMUX_PAD(0x37C, 0xD0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_SS0__GPIO_4_15		IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX50_PAD_ECSPI1_SS0__CSPI_SS3		IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3		IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI1_SS0__UART4_CTS		IOMUX_PAD(0x37C, 0xD0, 4, 0x7d8, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9		IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI1_SS0__WEIM_D11		IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK	IOMUX_PAD(0x380, 0xD4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__GPIO_4_16		IOMUX_PAD(0x380, 0xD4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR		IOMUX_PAD(0x380, 0xD4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY	IOMUX_PAD(0x380, 0xD4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__UART5_RTS		IOMUX_PAD(0x380, 0xD4, 4, 0x7e0, 0, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK	IOMUX_PAD(0x380, 0xD4, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__NANDF_CEN4	IOMUX_PAD(0x380, 0xD4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SCLK__WEIM_D8		IOMUX_PAD(0x380, 0xD4, 7, 0x80c, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI	IOMUX_PAD(0x384, 0xD8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__GPIO_4_17		IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD		IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1	IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI2_MOSI__UART5_CTS		IOMUX_PAD(0x384, 0xD8, 4, 0x7e0, 1, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN		IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5	IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MOSI__WEIM_D9		IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO	IOMUX_PAD(0x388, 0xDC, 0, 0x73c, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__GPIO_4_18		IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS		IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2	IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI2_MISO__UART5_TXD		IOMUX_PAD(0x388, 0xDC, 4, 0x7e4, 4, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC	IOMUX_PAD(0x388, 0xDC, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__NANDF_CEN6	IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_MISO__WEIM_D10		IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0		IOMUX_PAD(0x38C, 0xE0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI2_SS0__GPIO_4_19		IOMUX_PAD(0x38C, 0xE0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS		IOMUX_PAD(0x38C, 0xE0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SS0__ECSPI1_SS3		IOMUX_PAD(0x38C, 0xE0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
+#define MX50_PAD_ECSPI2_SS0__UART5_RXD		IOMUX_PAD(0x38C, 0xE0, 4, 0x7e4, 5, MX50_UART_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC	IOMUX_PAD(0x38C, 0xE0, 5, 0x6f8, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SS0__NANDF_CEN7		IOMUX_PAD(0x38C, 0xE0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_ECSPI2_SS0__WEIM_D11		IOMUX_PAD(0x38C, 0xE0, 7, 0x818, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x390, 0xE4, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_CLK__GPIO_5_0	IOMUX_PAD(0x390, 0xE4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD1_CLK__CLKO		IOMUX_PAD(0x390, 0xE4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x394, 0xE8, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_CMD__GPIO_5_1	IOMUX_PAD(0x394, 0xE8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD1_CMD__CLKO2		IOMUX_PAD(0x394, 0xE8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_D0__SD1_D0		IOMUX_PAD(0x398, 0xEC, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_D0__GPIO_5_2	IOMUX_PAD(0x398, 0xEC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD1_D0__PLL1_BYP	IOMUX_PAD(0x398, 0xEC, 7, 0x6dc, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_D1__SD1_D1		IOMUX_PAD(0x39C, 0xF0, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_D1__GPIO_5_3	IOMUX_PAD(0x39C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD1_D1__PLL2_BYP	IOMUX_PAD(0x39C, 0xF0, 7, 0x6e0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_D2__SD1_D2		IOMUX_PAD(0x3A0, 0xF4, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_D2__GPIO_5_4	IOMUX_PAD(0x3A0, 0xF4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD1_D2__PLL3_BYP	IOMUX_PAD(0x3A0, 0xF4, 7, 0x6e4, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD1_D3__SD1_D3		IOMUX_PAD(0x3A4, 0xF8, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD1_D3__GPIO_5_5	IOMUX_PAD(0x3A4, 0xF8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_CLK__SD2_CLK	IOMUX_PAD(0x3A8, 0xFC, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_CLK__GPIO_5_6	IOMUX_PAD(0x3A8, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_CLK__MSHC_SCLK	IOMUX_PAD(0x3A8, 0xFC, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_SD2_CMD__SD2_CMD	IOMUX_PAD(0x3AC, 0x100, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_CMD__GPIO_5_7	IOMUX_PAD(0x3AC, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_CMD__MSHC_BS	IOMUX_PAD(0x3AC, 0x100, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+
+#define MX50_PAD_SD2_D0__SD2_D0		IOMUX_PAD(0x3B0, 0x104, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D0__GPIO_5_8	IOMUX_PAD(0x3B0, 0x104, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D0__MSHC_D0	IOMUX_PAD(0x3B0, 0x104, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D0__KEY_COL4	IOMUX_PAD(0x3B0, 0x104, 3, 0x790, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D1__SD2_D1		IOMUX_PAD(0x3B4, 0x108, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D1__GPIO_5_9	IOMUX_PAD(0x3B4, 0x108, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D1__MSHC_D1	IOMUX_PAD(0x3B4, 0x108, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D1__KEY_ROW4	IOMUX_PAD(0x3B4, 0x108, 3, 0x7a0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D2__SD2_D2		IOMUX_PAD(0x3B8, 0x10C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D2__GPIO_5_10	IOMUX_PAD(0x3B8, 0x10C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D2__MSHC_D2	IOMUX_PAD(0x3B8, 0x10C, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D2__KEY_COL5	IOMUX_PAD(0x3B8, 0x10C, 3, 0x794, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D3__SD2_D3		IOMUX_PAD(0x3BC, 0x110, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D3__GPIO_5_11	IOMUX_PAD(0x3BC, 0x110, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D3__MSHC_D3	IOMUX_PAD(0x3BC, 0x110, 2, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D3__KEY_ROW5	IOMUX_PAD(0x3BC, 0x110, 3, 0x7a4, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D4__SD2_D4		IOMUX_PAD(0x3C0, 0x114, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D4__GPIO_5_12	IOMUX_PAD(0x3C0, 0x114, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D4__AUD4_RXFS	IOMUX_PAD(0x3C0, 0x114, 2, 0x6d0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D4__KEY_COL6	IOMUX_PAD(0x3C0, 0x114, 3, 0x798, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D4__WEIM_D0	IOMUX_PAD(0x3C0, 0x114, 4, 0x7ec, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D4__CCM_OUT0	IOMUX_PAD(0x3C0, 0x114, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D5__SD2_D5		IOMUX_PAD(0x3C4, 0x118, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D5__GPIO_5_13	IOMUX_PAD(0x3C4, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D5__AUD4_RXC	IOMUX_PAD(0x3C4, 0x118, 2, 0x6cc, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D5__KEY_ROW6	IOMUX_PAD(0x3C4, 0x118, 3, 0x7a8, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D5__WEIM_D1	IOMUX_PAD(0x3C4, 0x118, 4, 0x7f0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D5__CCM_OUT1	IOMUX_PAD(0x3C4, 0x118, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D6__SD2_D6		IOMUX_PAD(0x3C8, 0x11C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D6__GPIO_5_14	IOMUX_PAD(0x3C8, 0x11C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D6__AUD4_RXD	IOMUX_PAD(0x3C8, 0x11C, 2, 0x6c4, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D6__KEY_COL7	IOMUX_PAD(0x3C8, 0x11C, 3, 0x79c, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D6__WEIM_D2	IOMUX_PAD(0x3C8, 0x11C, 4, 0x7f4, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D6__CCM_OUT2	IOMUX_PAD(0x3C8, 0x11C, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_D7__SD2_D7		IOMUX_PAD(0x3CC, 0x120, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_D7__GPIO_5_15	IOMUX_PAD(0x3CC, 0x120, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D7__AUD4_TXFS	IOMUX_PAD(0x3CC, 0x120, 2, 0x6d8, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D7__KEY_ROW7	IOMUX_PAD(0x3CC, 0x120, 3, 0x7ac, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D7__WEIM_D3	IOMUX_PAD(0x3CC, 0x120, 4, 0x7f8, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_D7__CCM_STOP	IOMUX_PAD(0x3CC, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_WP__SD2_WP		IOMUX_PAD(0x3D0, 0x124, 0, 0x744, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_WP__GPIO_5_16	IOMUX_PAD(0x3D0, 0x124, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_WP__AUD4_TXD	IOMUX_PAD(0x3D0, 0x124, 2, 0x6c8, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_WP__WEIM_D4	IOMUX_PAD(0x3D0, 0x124, 4, 0x7fc, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_WP__CCM_WAIT	IOMUX_PAD(0x3D0, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD2_CD__SD2_CD		IOMUX_PAD(0x3D4, 0x128, 0, 0x740, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD2_CD__GPIO_5_17	IOMUX_PAD(0x3D4, 0x128, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_CD__AUD4_TXC	IOMUX_PAD(0x3D4, 0x128, 2, 0x6d4, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_CD__WEIM_D5	IOMUX_PAD(0x3D4, 0x128, 4, 0x800, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD2_CD__CCM_REF_EN	IOMUX_PAD(0x3D4, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_ON_REQ__PMIC_ON_REQ	IOMUX_PAD(0x3D8, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ	IOMUX_PAD(0x3DC, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_PORT_B__PMIC_PORT_B	IOMUX_PAD(0x3E0, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_BOOT_MODE1__PMIC_BOOT_MODE1	IOMUX_PAD(0x3E4, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_RESET_IN_B__PMIC_RESET_IN_B	IOMUX_PAD(0x3E8, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_BOOT_MODE0__PMIC_BOOT_MODE0	IOMUX_PAD(0x3EC, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_TEST_MODE__PMIC_TEST_MODE	IOMUX_PAD(0x3F0, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_TMS__PMIC_JTAG_TMS	IOMUX_PAD(0x3F4, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_MOD__PMIC_JTAG_MOD	IOMUX_PAD(0x3F8, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_TRSTB__PMIC_JTAG_TRSTB	IOMUX_PAD(0x3FC, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_TDI__PMIC_JTAG_TDI	IOMUX_PAD(0x400, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_TCK__PMIC_JTAG_TCK	IOMUX_PAD(0x404, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_PMIC_JTAG_TDO__PMIC_JTAG_TDO	IOMUX_PAD(0x408, 0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D0__DISP_D0	IOMUX_PAD(0x40C, 0x12C, 0, 0x6fc, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D0__GPIO_2_0	IOMUX_PAD(0x40C, 0x12C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D0__FEC_TXCLK	IOMUX_PAD(0x40C, 0x12C, 2, 0x78c, 0, PAD_CTL_HYS | PAD_CTL_PKE)
+
+#define MX50_PAD_DISP_D1__DISP_D1	IOMUX_PAD(0x410, 0x130, 0, 0x700, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D1__GPIO_2_1	IOMUX_PAD(0x410, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D1__FEC_RX_ER	IOMUX_PAD(0x410, 0x130, 2, 0x788, 0, PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX50_PAD_DISP_D1__WEIM_A17	IOMUX_PAD(0x410, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D2__DISP_D2	IOMUX_PAD(0x414, 0x134, 0, 0x704, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D2__GPIO_2_2	IOMUX_PAD(0x414, 0x134, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D2__FEC_RX_DV	IOMUX_PAD(0x414, 0x134, 2, 0x784, 0, PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX50_PAD_DISP_D2__WEIM_A18	IOMUX_PAD(0x414, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D3__DISP_D3	IOMUX_PAD(0x418, 0x138, 0, 0x708, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D3__GPIO_2_3	IOMUX_PAD(0x418, 0x138, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D3__FEC_RXD1	IOMUX_PAD(0x418, 0x138, 2, 0x77C, 0, PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX50_PAD_DISP_D3__WEIM_A19	IOMUX_PAD(0x418, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D3__FEC_COL	IOMUX_PAD(0x418, 0x138, 4, 0x770, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D4__DISP_D4	IOMUX_PAD(0x41C, 0x13C, 0, 0x70c, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D4__GPIO_2_4	IOMUX_PAD(0x41C, 0x13C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D4__FEC_RXD0	IOMUX_PAD(0x41C, 0x13C, 2, 0x778, 0, PAD_CTL_HYS | PAD_CTL_PKE)
+#define MX50_PAD_DISP_D4__WEIM_A20	IOMUX_PAD(0x41C, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D5__DISP_D5	IOMUX_PAD(0x420, 0x140, 0, 0x710, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D5__GPIO_2_5	IOMUX_PAD(0x420, 0x140, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D5__FEC_TX_EN	IOMUX_PAD(0x420, 0x140, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_DISP_D5__WEIM_A21	IOMUX_PAD(0x420, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D6__DISP_D6	IOMUX_PAD(0x424, 0x144, 0, 0x714, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D6__GPIO_2_6	IOMUX_PAD(0x424, 0x144, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D6__FEC_TXD1	IOMUX_PAD(0x424, 0x144, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_DISP_D6__WEIM_A22	IOMUX_PAD(0x424, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D6__FEC_RX_CLK	IOMUX_PAD(0x424, 0x144, 4, 0x780, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D7__DISP_D7	IOMUX_PAD(0x428, 0x148, 0, 0x718, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D7__GPIO_2_7	IOMUX_PAD(0x428, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D7__FEC_TXD0	IOMUX_PAD(0x428, 0x148, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_DISP_D7__WEIM_A23	IOMUX_PAD(0x428, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+
+
+#define MX50_PAD_DISP_WR__ELCDIF_WR	IOMUX_PAD(0x42C, 0x14C, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_WR__GPIO_2_16	IOMUX_PAD(0x42C, 0x14C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_WR__ELCDIF_PIXCLK	IOMUX_PAD(0x42C, 0x14C, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_WR__WEIM_A24	IOMUX_PAD(0x42C, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_RD__ELCDIF_RD	IOMUX_PAD(0x430, 0x150, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RD__GPIO_2_19	IOMUX_PAD(0x430, 0x150, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_RD__ELCDIF_EN	IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RD__WEIM_A25	IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_RS__ELCDIF_RS	IOMUX_PAD(0x434, 0x154, 0, 0x73c, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RS__GPIO_2_17	IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_RS__ELCDIF_VSYNC	IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RS__WEIM_A26	IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_CS__ELCDIF_CS	IOMUX_PAD(0x438, 0x158, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_CS__GPIO_2_21	IOMUX_PAD(0x438, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_CS__ELCDIF_HSYNC	IOMUX_PAD(0x438, 0x158, 2, 0x6f8, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_CS__WEIM_A27	IOMUX_PAD(0x438, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_CS__WEIM_CS3	IOMUX_PAD(0x438, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_BUSY__ELCDIF_HSYNC	IOMUX_PAD(0x43C, 0x15C, 0, 0x6f8, 2, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_BUSY__GPIO_2_18		IOMUX_PAD(0x43C, 0x15C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_BUSY__WEIM_CS3		IOMUX_PAD(0x43C, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_RESET__ELCDIF_RST	IOMUX_PAD(0x440, 0x160, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_RESET__GPIO_2_20	IOMUX_PAD(0x440, 0x160, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_RESET__WEIM_CS3	IOMUX_PAD(0x440, 0x160, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_CMD__SD3_CMD	IOMUX_PAD(0x444, 0x164, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_CMD__GPIO_5_18	IOMUX_PAD(0x444, 0x164, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_CMD__NANDF_WRN	IOMUX_PAD(0x444, 0x164, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_CMD__SSP_CMD	IOMUX_PAD(0x444, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_CLK__SD3_CLK	IOMUX_PAD(0x448, 0x168, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_CLK__GPIO_5_19	IOMUX_PAD(0x448, 0x168, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_CLK__NANDF_RDN	IOMUX_PAD(0x448, 0x168, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_CLK__SSP_CLK	IOMUX_PAD(0x448, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D0__SD3_D0		IOMUX_PAD(0x44C, 0x16C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D0__GPIO_5_20	IOMUX_PAD(0x44C, 0x16C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D0__NANDF_D4	IOMUX_PAD(0x44C, 0x16C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D0__SSP_D0		IOMUX_PAD(0x44C, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD3_D0__PLL1_BYP	IOMUX_PAD(0x44C, 0x16C, 7, 0x6dc, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D1__SD3_D1		IOMUX_PAD(0x450, 0x170, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D1__GPIO_5_21	IOMUX_PAD(0x450, 0x170, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D1__NANDF_D5	IOMUX_PAD(0x450, 0x170, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D1__PLL2_BYP	IOMUX_PAD(0x450, 0x170, 7, 0x6e0, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D2__SD3_D2		IOMUX_PAD(0x454, 0x174, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D2__GPIO_5_22	IOMUX_PAD(0x454, 0x174, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D2__NANDF_D6	IOMUX_PAD(0x454, 0x174, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D2__SSP_D2		IOMUX_PAD(0x454, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD3_D2__PLL3_BYP	IOMUX_PAD(0x454, 0x174, 7, 0x6e4, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D3__SD3_D3		IOMUX_PAD(0x458, 0x178, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D3__GPIO_5_23	IOMUX_PAD(0x458, 0x178, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D3__NANDF_D7	IOMUX_PAD(0x458, 0x178, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D3__SSP_D3		IOMUX_PAD(0x458, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D4__SD3_D4		IOMUX_PAD(0x45C, 0x17C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D4__GPIO_5_24	IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D4__NANDF_D0	IOMUX_PAD(0x45C, 0x17C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D4__SSP_D4		IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D5__SD3_D5		IOMUX_PAD(0x460, 0x180, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D5__GPIO_5_25	IOMUX_PAD(0x460, 0x180, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D5__NANDF_D1	IOMUX_PAD(0x460, 0x180, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D5__SSP_D5		IOMUX_PAD(0x460, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D6__SD3_D6		IOMUX_PAD(0x464, 0x184, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D6__GPIO_5_26	IOMUX_PAD(0x464, 0x184, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D6__NANDF_D2	IOMUX_PAD(0x464, 0x184, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D6__SSP_D6		IOMUX_PAD(0x464, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_D7__SD3_D7		IOMUX_PAD(0x468, 0x188, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_D7__GPIO_5_27	IOMUX_PAD(0x468, 0x188, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_D7__NANDF_D3	IOMUX_PAD(0x468, 0x188, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_D7__SSP_D7		IOMUX_PAD(0x468, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_SD3_WP__SD3_WP		IOMUX_PAD(0x46C, 0x18C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_WP__GPIO_5_28	IOMUX_PAD(0x46C, 0x18C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_SD3_WP__NANDF_RESETN	IOMUX_PAD(0x46C, 0x18C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_SD3_WP__SSP_CD		IOMUX_PAD(0x46C, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_SD3_WP__SD4_LCTL	IOMUX_PAD(0x46C, 0x18C, 4, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_SD3_WP__WEIM_CS3	IOMUX_PAD(0x46C, 0x18C, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D8__DISP_D8	IOMUX_PAD(0x470, 0x190, 0, 0x71c, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D8__GPIO_2_8	IOMUX_PAD(0x470, 0x190, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D8__NANDF_CLE	IOMUX_PAD(0x470, 0x190, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D8__SD1_LCTL	IOMUX_PAD(0x470, 0x190, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D8__SD4_CMD	IOMUX_PAD(0x470, 0x190, 4, 0x74c, 2, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D8__KEY_COL4	IOMUX_PAD(0x470, 0x190, 5, 0x790, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D8__FEC_TX_CLK	IOMUX_PAD(0x470, 0x190, 6, 0x78c, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D9__DISP_D9	IOMUX_PAD(0x474, 0x194, 0, 0x720, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D9__GPIO_2_9	IOMUX_PAD(0x474, 0x194, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D9__NANDF_ALE	IOMUX_PAD(0x474, 0x194, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D9__SD2_LCTL	IOMUX_PAD(0x474, 0x194, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D9__SD4_CLK	IOMUX_PAD(0x474, 0x194, 4, 0x748, 2, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D9__KEY_ROW4	IOMUX_PAD(0x474, 0x194, 5, 0x7a0, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D9__FEC_RX_ER	IOMUX_PAD(0x474, 0x194, 6, 0x788, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D10__DISP_D10	IOMUX_PAD(0x478, 0x198, 0, 0x724, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D10__GPIO_2_10	IOMUX_PAD(0x478, 0x198, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D10__NANDF_CEN0	IOMUX_PAD(0x478, 0x198, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D10__SD3_LCTL	IOMUX_PAD(0x478, 0x198, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D10__SD4_D0	IOMUX_PAD(0x478, 0x198, 4, 0x750, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D10__KEY_COL5	IOMUX_PAD(0x478, 0x198, 5, 0x794, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D10__FEC_RX_DV	IOMUX_PAD(0x478, 0x198, 6, 0x784, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D11__DISP_D11	IOMUX_PAD(0x47C, 0x19C, 0, 0x728, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D11__GPIO_2_11	IOMUX_PAD(0x47C, 0x19C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D11__NANDF_CEN1	IOMUX_PAD(0x47C, 0x19C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D11__SD4_D1	IOMUX_PAD(0x47C, 0x19C, 4, 0x754, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D11__KEY_ROW5	IOMUX_PAD(0x47C, 0x19C, 5, 0x7a4, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D11__FEC_RDAT1	IOMUX_PAD(0x47C, 0x19C, 6, 0x77c, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D12__DISP_D12	IOMUX_PAD(0x480, 0x1A0, 0, 0x72c, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D12__GPIO_2_12	IOMUX_PAD(0x480, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D12__NANDF_CEN2	IOMUX_PAD(0x480, 0x1A0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D12__SD1_CD	IOMUX_PAD(0x480, 0x1A0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D12__SD4_D2	IOMUX_PAD(0x480, 0x1A0, 4, 0x758, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D12__KEY_COL6	IOMUX_PAD(0x480, 0x1A0, 5, 0x798, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D12__FEC_RDAT0	IOMUX_PAD(0x480, 0x1A0, 6, 0x778, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D13__DISP_D13	IOMUX_PAD(0x484, 0x1A4, 0, 0x730, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D13__GPIO_2_13	IOMUX_PAD(0x484, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D13__NANDF_CEN3	IOMUX_PAD(0x484, 0x1A4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D13__SD3_CD	IOMUX_PAD(0x484, 0x1A4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D13__SD4_D3	IOMUX_PAD(0x484, 0x1A4, 4, 0x75c, 1, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D13__KEY_ROW6	IOMUX_PAD(0x484, 0x1A4, 5, 0x7a8, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D13__FEC_TX_EN	IOMUX_PAD(0x484, 0x1A4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D14__DISP_D14	IOMUX_PAD(0x488, 0x1A8, 0, 0x734, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D14__GPIO_2_14	IOMUX_PAD(0x488, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D14__NANDF_RDY0	IOMUX_PAD(0x488, 0x1A8, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D14__SD1_WP	IOMUX_PAD(0x488, 0x1A8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D14__SD4_WP	IOMUX_PAD(0x488, 0x1A8, 4, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D14__KEY_COL7	IOMUX_PAD(0x488, 0x1A8, 5, 0x79c, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D14__FEC_TDAT1	IOMUX_PAD(0x488, 0x1A8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_DISP_D15__DISP_D15	IOMUX_PAD(0x48C, 0x1AC, 0, 0x738, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_DISP_D15__GPIO_2_15	IOMUX_PAD(0x48C, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D15__NANDF_DQS	IOMUX_PAD(0x48C, 0x1AC, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D15__SD3_RST	IOMUX_PAD(0x48C, 0x1AC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D15__SD4_CD	IOMUX_PAD(0x48C, 0x1AC, 4, 0x0, 0, MX50_SD_PAD_CTRL)
+#define MX50_PAD_DISP_D15__KEY_ROW7	IOMUX_PAD(0x48C, 0x1AC, 5, 0x7ac, 1, NO_PAD_CTRL)
+#define MX50_PAD_DISP_D15__FEC_TDAT0	IOMUX_PAD(0x48C, 0x1AC, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D0__EPDC_D0	IOMUX_PAD(0x54C, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D0__GPIO_3_0	IOMUX_PAD(0x54C, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D0__WEIM_D0	IOMUX_PAD(0x54C, 0x1B0, 2, 0x7ec, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D0__ELCDIF_RS	IOMUX_PAD(0x54C, 0x1B0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D0__ELCDIF_PIXCLK	IOMUX_PAD(0x54C, 0x1B0, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D1__EPDC_D1	IOMUX_PAD(0x550, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D1__GPIO_3_1	IOMUX_PAD(0x550, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D1__WEIM_D1	IOMUX_PAD(0x550, 0x1B4, 2, 0x7f0, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D1__ELCDIF_CS	IOMUX_PAD(0x550, 0x1B4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D1__ELCDIF_EN	IOMUX_PAD(0x550, 0x1B4, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D2__EPDC_D2	IOMUX_PAD(0x554, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D2__GPIO_3_2	IOMUX_PAD(0x554, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D2__WEIM_D2	IOMUX_PAD(0x554, 0x1B8, 2, 0x7f4, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D2__ELCDIF_WR	IOMUX_PAD(0x554, 0x1B8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC	IOMUX_PAD(0x554, 0x1B8, 4, 0x73c, 2, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D3__EPDC_D3	IOMUX_PAD(0x558, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D3__GPIO_3_3	IOMUX_PAD(0x558, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D3__WEIM_D3	IOMUX_PAD(0x558, 0x1BC, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D3__ELCDIF_RD	IOMUX_PAD(0x558, 0x1BC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC	IOMUX_PAD(0x558, 0x1BC, 4, 0x6f8, 3, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D4__EPDC_D4	IOMUX_PAD(0x55C, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D4__GPIO_3_4	IOMUX_PAD(0x55C, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D4__WEIM_D4	IOMUX_PAD(0x55C, 0x1C0, 2, 0x7fc, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D5__EPDC_D5	IOMUX_PAD(0x560, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D5__GPIO_3_5	IOMUX_PAD(0x560, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D5__WEIM_D5	IOMUX_PAD(0x560, 0x1C4, 2, 0x800, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D6__EPDC_D6	IOMUX_PAD(0x564, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D6__GPIO_3_6	IOMUX_PAD(0x564, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D6__WEIM_D6	IOMUX_PAD(0x564, 0x1C8, 2, 0x804, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D7__EPDC_D7	IOMUX_PAD(0x568, 0x1CC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D7__GPIO_3_7	IOMUX_PAD(0x568, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D7__WEIM_D7	IOMUX_PAD(0x568, 0x1CC, 2, 0x808, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D8__EPDC_D8	IOMUX_PAD(0x56C, 0x1D0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D8__GPIO_3_8	IOMUX_PAD(0x56C, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D8__WEIM_D8	IOMUX_PAD(0x56C, 0x1D0, 2, 0x80c, 2, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D8__ELCDIF_D24	IOMUX_PAD(0x56C, 0x1D0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D9__EPDC_D9	IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D9__GPIO_3_9	IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D9__WEIM_D9	IOMUX_PAD(0x570, 0x1D4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D9__ELCDIF_D25	IOMUX_PAD(0x570, 0x1D4, 3, 0x810, 2, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D10__EPDC_D10	IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D10__GPIO_3_10	IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D10__WEIM_D10	IOMUX_PAD(0x574, 0x1D8, 2, 0x814, 2, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D10__ELCDIF_D26	IOMUX_PAD(0x574, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D11__EPDC_D11	IOMUX_PAD(0x578, 0x1DC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D11__GPIO_3_11	IOMUX_PAD(0x578, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D11__WEIM_D11	IOMUX_PAD(0x578, 0x1DC, 2, 0x818, 2, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D11__ELCDIF_D27	IOMUX_PAD(0x578, 0x1DC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D12__EPDC_D12	IOMUX_PAD(0x57C, 0x1E0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D12__GPIO_3_12	IOMUX_PAD(0x57C, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D12__WEIM_D12	IOMUX_PAD(0x57C, 0x1E0, 2, 0x81c, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D12__ELCDIF_D28	IOMUX_PAD(0x57C, 0x1E0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D13__EPDC_D13	IOMUX_PAD(0x580, 0x1E4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D13__GPIO_3_13	IOMUX_PAD(0x580, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D13__WEIM_D13	IOMUX_PAD(0x580, 0x1E4, 2, 0x820, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D13__ELCDIF_D29	IOMUX_PAD(0x580, 0x1E4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D14__EPDC_D14	IOMUX_PAD(0x584, 0x1E8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D14__GPIO_3_14	IOMUX_PAD(0x584, 0x1E8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D14__WEIM_D14	IOMUX_PAD(0x584, 0x1E8, 2, 0x824, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D14__ELCDIF_D30	IOMUX_PAD(0x584, 0x1E8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D14__AUD6_TXD	IOMUX_PAD(0x584, 0x1E8, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_D15__EPDC_D15	IOMUX_PAD(0x588, 0x1EC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D15__GPIO_3_15	IOMUX_PAD(0x588, 0x1EC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D15__WEIM_D15	IOMUX_PAD(0x588, 0x1EC, 2, 0x828, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_D15__ELCDIF_D31	IOMUX_PAD(0x588, 0x1EC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_D15__AUD6_TXC	IOMUX_PAD(0x588, 0x1EC, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK	IOMUX_PAD(0x58C, 0x1F0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDCLK__GPIO_3_16	IOMUX_PAD(0x58C, 0x1F0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDCLK__WEIM_D16	IOMUX_PAD(0x58C, 0x1F0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDCLK__ELCDIF_D16	IOMUX_PAD(0x58C, 0x1F0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_GDCLK__AUD6_TXFS	IOMUX_PAD(0x58C, 0x1F0, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_GDSP__EPDC_GDSP	IOMUX_PAD(0x590, 0x1F4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDSP__GPIO_3_17	IOMUX_PAD(0x590, 0x1F4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDSP__WEIM_D17	IOMUX_PAD(0x590, 0x1F4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDSP__ELCDIF_D17	IOMUX_PAD(0x590, 0x1F4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_GDSP__AUD6_RXD	IOMUX_PAD(0x590, 0x1F4, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_GDOE__EPDC_GDOE	IOMUX_PAD(0x594, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDOE__GPIO_3_18	IOMUX_PAD(0x594, 0x1F8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDOE__WEIM_D18	IOMUX_PAD(0x594, 0x1F8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDOE__ELCDIF_D18	IOMUX_PAD(0x594, 0x1F8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_GDOE__AUD6_RXC	IOMUX_PAD(0x594, 0x1F8, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_GDRL__EPDC_GDRL	IOMUX_PAD(0x598, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDRL__GPIO_3_19	IOMUX_PAD(0x598, 0x1FC, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDRL__WEIM_D19	IOMUX_PAD(0x598, 0x1FC, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_GDRL__ELCDIF_D19	IOMUX_PAD(0x598, 0x1FC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_GDRL__AUD6_RXFS	IOMUX_PAD(0x598, 0x1FC, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCLK__EPDC_SDCLK	IOMUX_PAD(0x59C, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLK__GPIO_3_20	IOMUX_PAD(0x59C, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLK__WEIM_D20	IOMUX_PAD(0x59C, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLK__ELCDIF_D20	IOMUX_PAD(0x59C, 0x200, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLK__AUD5_TXD	IOMUX_PAD(0x59C, 0x200, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDOEZ__EPDC_SDOEZ	IOMUX_PAD(0x5A0, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOEZ__GPIO_3_21	IOMUX_PAD(0x5A0, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOEZ__WEIM_D21	IOMUX_PAD(0x5A0, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOEZ__ELCDIF_D21	IOMUX_PAD(0x5A0, 0x204, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOEZ__AUD5_TXC	IOMUX_PAD(0x5A0, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDOED__EPDC_SDOED	IOMUX_PAD(0x5A4, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOED__GPIO_3_22	IOMUX_PAD(0x5A4, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOED__WEIM_D22	IOMUX_PAD(0x5A4, 0x208, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOED__ELCDIF_D22	IOMUX_PAD(0x5A4, 0x208, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOED__AUD5_TXFS	IOMUX_PAD(0x5A4, 0x208, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDOE__EPDC_SDOE	IOMUX_PAD(0x5A8, 0x20C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOE__GPIO_3_23	IOMUX_PAD(0x5A8, 0x20C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOE__WEIM_D23	IOMUX_PAD(0x5A8, 0x20C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOE__ELCDIF_D23	IOMUX_PAD(0x5A8, 0x20C, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDOE__AUD5_RXD	IOMUX_PAD(0x5A8, 0x20C, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDLE__EPDC_SDLE	IOMUX_PAD(0x5AC, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDLE__GPIO_3_24	IOMUX_PAD(0x5AC, 0x210, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDLE__WEIM_D24	IOMUX_PAD(0x5AC, 0x210, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDLE__ELCDIF_D8	IOMUX_PAD(0x5AC, 0x210, 3, 0x71c, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDLE__AUD5_RXC	IOMUX_PAD(0x5AC, 0x210, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCLKN__EPDC_SDCLKN	IOMUX_PAD(0x5B0, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLKN__GPIO_3_25		IOMUX_PAD(0x5B0, 0x214, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLKN__WEIM_D25		IOMUX_PAD(0x5B0, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLKN__ELCDIF_D9		IOMUX_PAD(0x5B0, 0x214, 3, 0x720, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCLKN__AUD5_RXFS		IOMUX_PAD(0x5B0, 0x214, 4, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDSHR__EPDC_SDSHR	IOMUX_PAD(0x5B4, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDSHR__GPIO_3_26	IOMUX_PAD(0x5B4, 0x218, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDSHR__WEIM_D26	IOMUX_PAD(0x5B4, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDSHR__ELCDIF_D10	IOMUX_PAD(0x5B4, 0x218, 3, 0x724, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_SDSHR__AUD4_TXD	IOMUX_PAD(0x5B4, 0x218, 4, 0x6c8, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRCOM__EPDC_PWRCOM	IOMUX_PAD(0x5B8, 0x21C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCOM__GPIO_3_27		IOMUX_PAD(0x5B8, 0x21C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCOM__WEIM_D27		IOMUX_PAD(0x5B8, 0x21C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCOM__ELCDIF_D11	IOMUX_PAD(0x5B8, 0x21C, 3, 0x728, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCOM__AUD4_TXC		IOMUX_PAD(0x5B8, 0x21C, 4, 0x6d4, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRSTAT__EPDC_PWRSTAT	IOMUX_PAD(0x5BC, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRSTAT__GPIO_3_28	IOMUX_PAD(0x5BC, 0x220, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRSTAT__WEIM_D28		IOMUX_PAD(0x5BC, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_D12	IOMUX_PAD(0x5BC, 0x220, 3, 0x72c, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRSTAT__AUD4_TXFS	IOMUX_PAD(0x5BC, 0x220, 4, 0x6d8, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRCTRL0__EPDC_PWRCTRL0	IOMUX_PAD(0x5C0, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL0__GPIO_3_29	IOMUX_PAD(0x5C0, 0x224, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL0__WEIM_D29	IOMUX_PAD(0x5C0, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_D13	IOMUX_PAD(0x5C0, 0x224, 3, 0x730, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL0__AUD4_RXD	IOMUX_PAD(0x5C0, 0x224, 4, 0x6c4, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRCTRL1__EPDC_PWRCTRL1	IOMUX_PAD(0x5C4, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL1__GPIO_3_30	IOMUX_PAD(0x5C4, 0x228, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL1__WEIM_D30	IOMUX_PAD(0x5C4, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_D14	IOMUX_PAD(0x5C4, 0x228, 3, 0x734, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL1__AUD4_RXC	IOMUX_PAD(0x5C4, 0x228, 4, 0x6cc, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRCTRL2__EPDC_PWRCTRL2	IOMUX_PAD(0x5C8, 0x22C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL2__GPIO_3_31	IOMUX_PAD(0x5C8, 0x22C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL2__WEIM_D31	IOMUX_PAD(0x5C8, 0x22C, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_D15	IOMUX_PAD(0x5C8, 0x22C, 3, 0x738, 1, MX50_ELCDIF_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL2__AUD4_RXFS	IOMUX_PAD(0x5C8, 0x22C, 4, 0x6d0, 1, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT0	IOMUX_PAD(0x5C8, 0x22C, 6, 0x7b8, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_PWRCTRL3__PWRCTRL3	IOMUX_PAD(0x5CC, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL3__GPIO_4_20	IOMUX_PAD(0x5CC, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL3__WEIM_EB2	IOMUX_PAD(0x5CC, 0x230, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT1	IOMUX_PAD(0x5CC, 0x230, 6, 0x7bc, 1, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_VCOM0__EPDC_VCOM0	IOMUX_PAD(0x5D0, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_VCOM0__GPIO_4_21	IOMUX_PAD(0x5D0, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_VCOM0__WEIM_EB3	IOMUX_PAD(0x5D0, 0x234, 2, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_VCOM1__EPDC_VCOM1	IOMUX_PAD(0x5D4, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_VCOM1__GPIO_4_22	IOMUX_PAD(0x5D4, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_VCOM1__WEIM_CS3	IOMUX_PAD(0x5D4, 0x238, 2, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EPDC_BDR0__EPDC_BDR0	IOMUX_PAD(0x5D8, 0x23C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_BDR0__GPIO_4_23	IOMUX_PAD(0x5D8, 0x23C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_BDR0__ELCDIF_D7	IOMUX_PAD(0x5D8, 0x23C, 3, 0x718, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_BDR1__EPDC_BDR1	IOMUX_PAD(0x5DC, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_BDR1__GPIO_4_24	IOMUX_PAD(0x5DC, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_BDR1__ELCDIF_D6	IOMUX_PAD(0x5DC, 0x240, 3, 0x714, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE0__EPDC_SDCE0	IOMUX_PAD(0x5E0, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE0__GPIO_4_25	IOMUX_PAD(0x5E0, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE0__ELCDIF_D5	IOMUX_PAD(0x5E0, 0x244, 3, 0x710, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE1__EPDC_SDCE1	IOMUX_PAD(0x5E4, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE1__GPIO_4_26	IOMUX_PAD(0x5E4, 0x248, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE1__ELCDIF_D4	IOMUX_PAD(0x5E4, 0x248, 2, 0x70c, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE2__EPDC_SDCE2		IOMUX_PAD(0x5E8, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE2__GPIO_4_27		IOMUX_PAD(0x5E8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT3	IOMUX_PAD(0x5E8, 0x24C, 3, 0x708, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE3__EPDC_SDCE3	IOMUX_PAD(0x5EC, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE3__GPIO_4_28	IOMUX_PAD(0x5EC, 0x250, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE3__ELCDIF_D2	IOMUX_PAD(0x5EC, 0x250, 3, 0x704, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE4__EPDC_SDCE4	IOMUX_PAD(0x5F0, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE4__GPIO_4_29	IOMUX_PAD(0x5F0, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE4__ELCDIF_D1	IOMUX_PAD(0x5F0, 0x254, 3, 0x700, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EPDC_SDCE5__EPDC_SDCE5	IOMUX_PAD(0x5F4, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE5__GPIO_4_30	IOMUX_PAD(0x5F4, 0x258, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EPDC_SDCE5__ELCDIF_D0	IOMUX_PAD(0x5F4, 0x258, 3, 0x6fc, 1, MX50_ELCDIF_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA0__WEIM_A0	IOMUX_PAD(0x5F8, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA0__GPIO_1_0	IOMUX_PAD(0x5F8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA0__KEY_COL4	IOMUX_PAD(0x5f8, 0x25C, 3, 0x790, 2, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA1__WEIM_A1	IOMUX_PAD(0x5FC, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA1__GPIO_1_1	IOMUX_PAD(0x5FC, 0x260, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA1__KEY_ROW4	IOMUX_PAD(0x5fc, 0x260, 3, 0x7a0, 2, MX50_KEYPAD_CTRL)
+
+#define MX50_PAD_EIM_DA2__WEIM_A2	IOMUX_PAD(0x600, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA2__GPIO_1_2	IOMUX_PAD(0x600, 0x264, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA2__KEY_COL5	IOMUX_PAD(0x600, 0x264, 3, 0x794, 2, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA3__WEIM_A3	IOMUX_PAD(0x604, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA3__GPIO_1_3	IOMUX_PAD(0x604, 0x268, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA3__KEY_ROW5	IOMUX_PAD(0x604, 0x268, 3, 0x7a4, 2, MX50_KEYPAD_CTRL)
+
+#define MX50_PAD_EIM_DA4__WEIM_A4	IOMUX_PAD(0x608, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA4__GPIO_1_4	IOMUX_PAD(0x608, 0x26C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA4__KEY_COL6	IOMUX_PAD(0x608, 0x26C, 3, 0x798, 2, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA5__WEIM_A5	IOMUX_PAD(0x60C, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA5__GPIO_1_5	IOMUX_PAD(0x60C, 0x270, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA5__KEY_ROW6	IOMUX_PAD(0x60C, 0x270, 3, 0x7a8, 2, MX50_KEYPAD_CTRL)
+
+#define MX50_PAD_EIM_DA6__WEIM_A6	IOMUX_PAD(0x610, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA6__GPIO_1_6	IOMUX_PAD(0x610, 0x274, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA6__KEY_COL7	IOMUX_PAD(0x610, 0x274, 3, 0x79c, 2, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA7__WEIM_A7	IOMUX_PAD(0x614, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA7__GPIO_1_7	IOMUX_PAD(0x614, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA7__KEY_ROW7	IOMUX_PAD(0x614, 0x278, 3, 0x7ac, 2, MX50_KEYPAD_CTRL)
+
+#define MX50_PAD_EIM_DA8__WEIM_A8	IOMUX_PAD(0x618, 0x27C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA8__GPIO_1_8	IOMUX_PAD(0x618, 0x27C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA8__NANDF_CLE	IOMUX_PAD(0x618, 0x27C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_EIM_DA9__WEIM_A9	IOMUX_PAD(0x61C, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA9__GPIO_1_9	IOMUX_PAD(0x61C, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA9__NANDF_ALE	IOMUX_PAD(0x61C, 0x280, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_EIM_DA10__WEIM_A10	IOMUX_PAD(0x620, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA10__GPIO_1_10	IOMUX_PAD(0x620, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA10__NANDF_CE0	IOMUX_PAD(0x620, 0x284, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_EIM_DA11__WEIM_A11	IOMUX_PAD(0x624, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA11__GPIO_1_11	IOMUX_PAD(0x624, 0x288, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA11__NANDF_CE1	IOMUX_PAD(0x624, 0x288, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+
+#define MX50_PAD_EIM_DA12__WEIM_A12	IOMUX_PAD(0x628, 0x28C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA12__GPIO_1_12	IOMUX_PAD(0x628, 0x28C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA12__NANDF_CE2	IOMUX_PAD(0x628, 0x28C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_EIM_DA12__EPDC_SDCE6	IOMUX_PAD(0x628, 0x28C, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA13__WEIM_A13	IOMUX_PAD(0x62C, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA13__GPIO_1_13	IOMUX_PAD(0x62C, 0x290, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA13__NANDF_CE3	IOMUX_PAD(0x62C, 0x290, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
+#define MX50_PIN_EIM_DA13__EPDC_SDCE7	IOMUX_PAD(0x62C, 0x290, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA14__WEIM_A14	IOMUX_PAD(0x630, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA14__GPIO_1_14	IOMUX_PAD(0x630, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA14__NANDF_READY	IOMUX_PAD(0x630, 0x294, 2, 0x7B4, 2, PAD_CTL_PKE | \
+							PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
+#define MX50_PAD_EIM_DA14__EPDC_SDCE8	IOMUX_PAD(0x630, 0x294, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_DA15__WEIM_A15	IOMUX_PAD(0x634, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_DA15__GPIO_1_15	IOMUX_PAD(0x634, 0x298, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PIN_EIM_DA15__NANDF_DQS	IOMUX_PAD(0x634, 0x298, 2, 0x7B0, 2, PAD_CTL_DSE_HIGH)
+#define MX50_PAD_EIM_DA15__EPDC_SDCE9	IOMUX_PAD(0x634, 0x298, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_CS2__WEIM_CS2	IOMUX_PAD(0x638, 0x29C, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_CS2__GPIO_1_16	IOMUX_PAD(0x638, 0x29C, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_CS2__WEIM_A27	IOMUX_PAD(0x638, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_CS1__WEIM_CS1	IOMUX_PAD(0x63C, 0x2A0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_CS1__GPIO_1_17	IOMUX_PAD(0x63C, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_CS0__WEIM_CS0	IOMUX_PAD(0x640, 0x2A4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_CS0__GPIO_1_18	IOMUX_PAD(0x640, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_EB0__WEIM_EB0	IOMUX_PAD(0x644, 0x2A8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_EB0__GPIO_1_19	IOMUX_PAD(0x644, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_EB1__WEIM_EB1	IOMUX_PAD(0x648, 0x2AC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_EB1__GPIO_1_20	IOMUX_PAD(0x648, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_WAIT__WEIM_WAIT	IOMUX_PAD(0x64C, 0x2B0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_WAIT__GPIO_1_21	IOMUX_PAD(0x64C, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_BCLK__WEIM_BCLK	IOMUX_PAD(0x650, 0x2B4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_BCLK__GPIO_1_22	IOMUX_PAD(0x650, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_RDY__WEIM_RDY	IOMUX_PAD(0x654, 0x2B8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_RDY__GPIO_1_23	IOMUX_PAD(0x654, 0x2B8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_OE__WEIM_OE	IOMUX_PAD(0x658, 0x2BC, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_OE__GPIO_1_24	IOMUX_PAD(0x658, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_RW__WEIM_RW	IOMUX_PAD(0x65C, 0x2C0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_RW__GPIO_1_25	IOMUX_PAD(0x65C, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_LBA__WEIM_LBA	IOMUX_PAD(0x660, 0x2C4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_LBA__GPIO_1_26	IOMUX_PAD(0x660, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX50_PAD_EIM_CRE__WEIM_CRE	IOMUX_PAD(0x664, 0x2C8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX50_PAD_EIM_CRE__GPIO_1_27	IOMUX_PAD(0x664, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL)
+
+#endif /* __MACH_IOMUX_MX50_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index d7a41e9a260..b6767f90ef1 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -15,373 +15,1553 @@
 
 #include <mach/iomux-v3.h>
 
-/*
- * various IOMUX alternate output functions (1-7)
- */
-typedef enum iomux_config {
-	IOMUX_CONFIG_ALT0,
-	IOMUX_CONFIG_ALT1,
-	IOMUX_CONFIG_ALT2,
-	IOMUX_CONFIG_ALT3,
-	IOMUX_CONFIG_ALT4,
-	IOMUX_CONFIG_ALT5,
-	IOMUX_CONFIG_ALT6,
-	IOMUX_CONFIG_ALT7,
-	IOMUX_CONFIG_GPIO,      /* added to help user use GPIO mode */
-	IOMUX_CONFIG_SION = 0x1 << 4,   /* LOOPBACK:MUX SION bit */
-} iomux_pin_cfg_t;
-
 /* Pad control groupings */
-#define MX51_UART1_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-				PAD_CTL_DSE_HIGH)
-#define MX51_UART2_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
-				PAD_CTL_SRE_FAST)
-#define MX51_UART3_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
-				PAD_CTL_SRE_FAST)
+#define MX51_UART_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_HYS | PAD_CTL_SRE_FAST)
 #define MX51_I2C_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
-				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
-#define MX51_USBH1_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
-				PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \
-				PAD_CTL_PKE | PAD_CTL_HYS)
-#define MX51_GPIO_PAD_CTRL		(PAD_CTL_DSE_HIGH | PAD_CTL_PKE | \
-				PAD_CTL_SRE_FAST)
-#define MX51_GPIO_PAD_CTRL_2	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
-					PAD_CTL_PUS_100K_UP)
-#define MX51_ECSPI_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
-				PAD_CTL_SRE_FAST)
-#define MX51_SDHCI_PAD_CTRL	(PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP | \
-				PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_SRE_FAST | \
-				PAD_CTL_DVS)
+				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
+				PAD_CTL_HYS)
+#define MX51_ESDHC_PAD_CTRL	(PAD_CTL_SRE_FAST | PAD_CTL_ODE | \
+				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
+				PAD_CTL_HYS)
+#define MX51_USBH1_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
+				PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP | \
+				PAD_CTL_HYS | PAD_CTL_PUE)
+#define MX51_ECSPI_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_HYS | \
+				PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
+#define MX51_SDHCI_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
+				PAD_CTL_PUS_47K_UP | PAD_CTL_PUE | \
+				PAD_CTL_SRE_FAST | PAD_CTL_DVS)
+#define MX51_GPIO_PAD_CTRL	(PAD_CTL_DSE_HIGH | PAD_CTL_PKE | PAD_CTL_SRE_FAST)
 
-#define MX51_PAD_CTRL_1	(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
-					PAD_CTL_PUE | PAD_CTL_PKE | PAD_CTL_HYS)
-#define MX51_PAD_CTRL_2	(PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX51_PAD_CTRL_3	(PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_CTRL_4	(PAD_CTL_DVS | PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX51_PAD_CTRL_5	(PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
+#define MX51_PAD_CTRL_2		(PAD_CTL_PKE | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_3		(PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
+#define MX51_PAD_CTRL_4		(PAD_CTL_PKE | PAD_CTL_DVS | PAD_CTL_HYS)
+#define MX51_PAD_CTRL_5		(PAD_CTL_DVS | PAD_CTL_DSE_HIGH)
 
 /*
  * The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
- * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO<unit>_<num>
  * See also iomux-v3.h
  */
 
-/*							  PAD    MUX   ALT INPSE PATH PADCTRL */
-#define MX51_PAD_EIM_DA0__EIM_DA0		IOMUX_PAD(0x7a8, 0x01c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA1__EIM_DA1		IOMUX_PAD(0x7a8, 0x020, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA2__EIM_DA2		IOMUX_PAD(0x7a8, 0x024, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA3__EIM_DA3		IOMUX_PAD(0x7a8, 0x028, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA4__EIM_DA4		IOMUX_PAD(0x7ac, 0x02c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA5__EIM_DA5		IOMUX_PAD(0x7ac, 0x030, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA6__EIM_DA6		IOMUX_PAD(0x7ac, 0x034, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA7__EIM_DA7		IOMUX_PAD(0x7ac, 0x038, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA8__EIM_DA8		IOMUX_PAD(0x7b0, 0x03c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA9__EIM_DA9		IOMUX_PAD(0x7b0, 0x040, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA10__EIM_DA10		IOMUX_PAD(0x7b0, 0x044, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA11__EIM_DA11		IOMUX_PAD(0x7b0, 0x048, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA12__EIM_DA12		IOMUX_PAD(0x7bc, 0x04c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA13__EIM_DA13		IOMUX_PAD(0x7bc, 0x050, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA14__EIM_DA14		IOMUX_PAD(0x7bc, 0x054, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_DA15__EIM_DA15		IOMUX_PAD(0x7bc, 0x058, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__GPIO_2_0              IOMUX_PAD(0x3f0, 0x05c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D16__I2C1_SDA		IOMUX_PAD(0x3f0, 0x05c, (4 | IOMUX_CONFIG_SION), \
-							0x09b4, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D17__GPIO_2_1              IOMUX_PAD(0x3f4, 0x060, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D18__GPIO_2_2              IOMUX_PAD(0x3f8, 0x064, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__GPIO_2_3              IOMUX_PAD(0x3fc, 0x068, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D19__I2C1_SCL		IOMUX_PAD(0x3fc, 0x068, (4 | IOMUX_CONFIG_SION), \
-							0x09b0, 0, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_EIM_D20__GPIO_2_4              IOMUX_PAD(0x400, 0x06c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D21__GPIO_2_5		IOMUX_PAD(0x404, 0x070, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_EIM_D22__GPIO_2_6              IOMUX_PAD(0x408, 0x074, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D23__GPIO_2_7              IOMUX_PAD(0x40c, 0x078, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D24__UART3_CTS             IOMUX_PAD(0x410, 0x07c, 3, 0x0,   0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART3_RXD             IOMUX_PAD(0x414, 0x080, 3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D25__UART2_CTS		IOMUX_PAD(0x414, 0x080, 4, 0x0,   0, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART3_TXD             IOMUX_PAD(0x418, 0x084, 3, 0x0,   0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D26__UART2_RTS		IOMUX_PAD(0x418, 0x084, 4, 0x9e8, 3, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_EIM_D27__UART3_RTS             IOMUX_PAD(0x41c, 0x088, 3, 0x9f0, 3, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_EIM_D28__EIM_D28               IOMUX_PAD(0x420, 0x08c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D29__EIM_D29               IOMUX_PAD(0x424, 0x090, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D30__EIM_D30               IOMUX_PAD(0x428, 0x094, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_D31__EIM_D31               IOMUX_PAD(0x42c, 0x09c, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A16__GPIO_2_10             IOMUX_PAD(0x430, 0x09c, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A17__GPIO_2_11             IOMUX_PAD(0x434, 0x0a0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A18__GPIO_2_12             IOMUX_PAD(0x438, 0x0a4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A19__GPIO_2_13             IOMUX_PAD(0x43c, 0x0a8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A20__GPIO_2_14             IOMUX_PAD(0x440, 0x0ac, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A21__GPIO_2_15             IOMUX_PAD(0x444, 0x0b0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A22__GPIO_2_16             IOMUX_PAD(0x448, 0x0b4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A23__GPIO_2_17             IOMUX_PAD(0x44c, 0x0b8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A24__GPIO_2_18             IOMUX_PAD(0x450, 0x0bc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A25__GPIO_2_19             IOMUX_PAD(0x454, 0x0c0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A26__GPIO_2_20             IOMUX_PAD(0x458, 0x0c4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_A27__GPIO_2_21             IOMUX_PAD(0x45c, 0x0c8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB0__EIM_EB0               IOMUX_PAD(0x460, 0x0cc, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB1__EIM_EB1               IOMUX_PAD(0x464, 0x0d0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__GPIO_2_22             IOMUX_PAD(0x468, 0x0d4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB2__FEC_MDIO		IOMUX_PAD(0x468, 0x0d4, 3, 0x0,   0, MX51_PAD_CTRL_1 | PAD_CTL_PUS_22K_UP)
-#define MX51_PAD_EIM_EB3__GPIO_2_23             IOMUX_PAD(0x46c, 0x0d8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_EB3__FEC_RDAT1		IOMUX_PAD(0x46c, 0x0d8, 3, 0x0,   0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_OE__GPIO_2_24              IOMUX_PAD(0x470, 0x0dc, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS0__GPIO_2_25             IOMUX_PAD(0x474, 0x0e0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS1__GPIO_2_26             IOMUX_PAD(0x478, 0x0e4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__GPIO_2_27             IOMUX_PAD(0x47c, 0x0e8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS2__FEC_RDAT2		IOMUX_PAD(0x47c, 0x0e8, 3, 0x0,   0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS3__GPIO_2_28             IOMUX_PAD(0x480, 0x0ec, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS3__FEC_RDAT3		IOMUX_PAD(0x480, 0x0ec, 3, 0x0,   0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS4__GPIO_2_29             IOMUX_PAD(0x484, 0x0f0, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS4__FEC_RX_ER		IOMUX_PAD(0x484, 0x0f0, 3, 0x0,   0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_CS5__GPIO_2_30             IOMUX_PAD(0x488, 0x0f4, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CS5__FEC_CRS		IOMUX_PAD(0x488, 0x0f4, 3, 0x0,   0, MX51_PAD_CTRL_2)
-#define MX51_PAD_EIM_DTACK__GPIO_2_31           IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_LBA__GPIO_3_1              IOMUX_PAD(0x494, 0x0FC, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_EIM_CRE__GPIO_3_2              IOMUX_PAD(0x4A0, 0x100, 1, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DRAM_CS1__DRAM_CS1             IOMUX_PAD(0x4D0, 0x104, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WE_B__GPIO_3_3           IOMUX_PAD(0x4E4, 0x108, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RE_B__GPIO_3_4           IOMUX_PAD(0x4E8, 0x10C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_ALE__GPIO_3_5            IOMUX_PAD(0x4EC, 0x110, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CLE__GPIO_3_6            IOMUX_PAD(0x4F0, 0x114, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_WP_B__GPIO_3_7           IOMUX_PAD(0x4F4, 0x118, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB0__GPIO_3_8            IOMUX_PAD(0x4F8, 0x11C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__GPIO_3_9            IOMUX_PAD(0x4FC, 0x120, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__GPIO_3_10           IOMUX_PAD(0x500, 0x124, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK         IOMUX_PAD(0x500, 0x124, 2, 0x0,   0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__FEC_COL		IOMUX_PAD(0x500, 0x124, 1, 0x0,   0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB3__GPIO_3_11           IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__ECSPI2_MISO         IOMUX_PAD(0x504, 0x128, 2, 0x0,   0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__FEC_RXCLK		IOMUX_PAD(0x504, 0x128, 1, 0x0,   0, MX51_PAD_CTRL_2)
-#define MX51_PAD_NANDF_RB6__FEC_RDAT0		IOMUX_PAD(0x5DC, 0x134, 1, 0x0,   0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_RB7__FEC_TDAT0		IOMUX_PAD(0x5E0, 0x138, 1, 0x0,   0, MX51_PAD_CTRL_5)
-#define MX51_PAD_GPIO_NAND__GPIO_3_12           IOMUX_PAD(0x514, 0x12C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS0__GPIO_3_16           IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS1__GPIO_3_17           IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__GPIO_3_18           IOMUX_PAD(0x520, 0x138, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS2__FEC_TX_ER		IOMUX_PAD(0x520, 0x138, 2, 0x0,   0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS3__GPIO_3_19           IOMUX_PAD(0x524, 0x13C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__FEC_MDC		IOMUX_PAD(0x524, 0x13C, 2, 0x0,   0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS4__GPIO_3_20           IOMUX_PAD(0x528, 0x140, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS4__FEC_TDAT1		IOMUX_PAD(0x528, 0x140, 2, 0x0,   0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS5__GPIO_3_21           IOMUX_PAD(0x52C, 0x144, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS5__FEC_TDAT2		IOMUX_PAD(0x52C, 0x144, 2, 0x0,   0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS6__GPIO_3_22           IOMUX_PAD(0x530, 0x148, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS6__FEC_TDAT3		IOMUX_PAD(0x530, 0x148, 2, 0x0,   0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_CS7__GPIO_3_23           IOMUX_PAD(0x534, 0x14C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_CS7__FEC_TX_EN		IOMUX_PAD(0x534, 0x14C, 1, 0x0,   0, MX51_PAD_CTRL_5)
-#define MX51_PAD_NANDF_RDY_INT__GPIO_3_24       IOMUX_PAD(0x538, 0x150, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	IOMUX_PAD(0x538, 0x150, 1, 0x0,   0, MX51_PAD_CTRL_4)
-#define MX51_PAD_NANDF_D15__GPIO_3_25           IOMUX_PAD(0x53C, 0x154, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D15__ECSPI2_MOSI         IOMUX_PAD(0x53C, 0x154, 2, 0x0,   0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_NANDF_D14__GPIO_3_26           IOMUX_PAD(0x540, 0x158, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D13__GPIO_3_27           IOMUX_PAD(0x544, 0x15C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D12__GPIO_3_28           IOMUX_PAD(0x548, 0x160, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D11__GPIO_3_29           IOMUX_PAD(0x54C, 0x164, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D10__GPIO_3_30           IOMUX_PAD(0x550, 0x168, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D9__GPIO_3_31            IOMUX_PAD(0x554, 0x16C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D8__GPIO_4_0             IOMUX_PAD(0x558, 0x170, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D7__GPIO_4_1             IOMUX_PAD(0x55C, 0x174, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D6__GPIO_4_2             IOMUX_PAD(0x560, 0x178, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D5__GPIO_4_3             IOMUX_PAD(0x564, 0x17C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D4__GPIO_4_4             IOMUX_PAD(0x568, 0x180, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D3__GPIO_4_5             IOMUX_PAD(0x56C, 0x184, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D2__GPIO_4_6             IOMUX_PAD(0x570, 0x188, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D1__GPIO_4_7             IOMUX_PAD(0x574, 0x18C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_D0__GPIO_4_8             IOMUX_PAD(0x578, 0x190, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D8__GPIO_3_12             IOMUX_PAD(0x57C, 0x194, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D9__GPIO_3_13             IOMUX_PAD(0x580, 0x198, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D10__CSI1_D10             IOMUX_PAD(0x584, 0x19C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D11__CSI1_D11             IOMUX_PAD(0x588, 0x1A0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D12__CSI1_D12             IOMUX_PAD(0x58C, 0x1A4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D13__CSI1_D13             IOMUX_PAD(0x590, 0x1A8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D14__CSI1_D14             IOMUX_PAD(0x594, 0x1AC, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D15__CSI1_D15             IOMUX_PAD(0x598, 0x1B0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D16__CSI1_D16             IOMUX_PAD(0x59C, 0x1B4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D17__CSI1_D17             IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D18__CSI1_D18             IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_D19__CSI1_D19             IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC         IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC         IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK       IOMUX_PAD(0x5B4, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_MCLK__CSI1_MCLK           IOMUX_PAD(0x5B8, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI1_PKE0__CSI1_PKE0           IOMUX_PAD(0x860, 0x000, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D12__GPIO_4_9             IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D13__GPIO_4_10            IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D14__GPIO_4_11            IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D15__GPIO_4_12            IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D16__GPIO_4_11            IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D17__GPIO_4_12            IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D18__GPIO_4_11            IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_D19__GPIO_4_12            IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_VSYNC__GPIO_4_13          IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_HSYNC__GPIO_4_14          IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSI2_PIXCLK__GPIO_4_15         IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__GPIO_4_16            IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_I2C1_CLK__HSI2C_CLK		IOMUX_PAD(0x5E8, 0x1F8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__GPIO_4_17            IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_I2C1_DAT__HSI2C_DAT		IOMUX_PAD(0x5EC, 0x1FC, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__AUD3_BB_TXD       IOMUX_PAD(0x5F0, 0x200, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_TXD__GPIO_4_18         IOMUX_PAD(0x5F0, 0x200, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__AUD3_BB_RXD       IOMUX_PAD(0x5F4, 0x204, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_RXD__GPIO_4_19         IOMUX_PAD(0x5F4, 0x204, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__AUD3_BB_CK         IOMUX_PAD(0x5F8, 0x208, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_CK__GPIO_4_20          IOMUX_PAD(0x5F8, 0x208, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__AUD3_BB_FS         IOMUX_PAD(0x5FC, 0x20C, IOMUX_CONFIG_SION, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_AUD3_BB_FS__GPIO_4_21          IOMUX_PAD(0x5FC, 0x20C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI        IOMUX_PAD(0x600, 0x210, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MOSI__GPIO_4_22          IOMUX_PAD(0x600, 0x210, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO        IOMUX_PAD(0x604, 0x214, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_MISO__GPIO_4_23          IOMUX_PAD(0x604, 0x214, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0          IOMUX_PAD(0x608, 0x218, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS0__GPIO_4_24           IOMUX_PAD(0x608, 0x218, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1          IOMUX_PAD(0x60C, 0x21C, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SS1__GPIO_4_25           IOMUX_PAD(0x60C, 0x21C, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY          IOMUX_PAD(0x610, 0x220, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_RDY__GPIO_4_26           IOMUX_PAD(0x610, 0x220, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK        IOMUX_PAD(0x614, 0x224, 0, 0x0,   0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_CSPI1_SCLK__GPIO_4_27          IOMUX_PAD(0x614, 0x224, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_UART1_RXD__UART1_RXD           IOMUX_PAD(0x618, 0x228, 0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
-#define MX51_PAD_UART1_TXD__UART1_TXD           IOMUX_PAD(0x61C, 0x22C, 0, 0x0,   0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
-#define MX51_PAD_UART1_RTS__UART1_RTS           IOMUX_PAD(0x620, 0x230, 0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
-#define MX51_PAD_UART1_CTS__UART1_CTS           IOMUX_PAD(0x624, 0x234, 0, 0x0,   0, MX51_UART1_PAD_CTRL)
-#define MX51_PAD_UART2_RXD__UART2_RXD           IOMUX_PAD(0x628, 0x238, 0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_UART2_TXD__UART2_TXD           IOMUX_PAD(0x62C, 0x23C, 0, 0x0,   0, MX51_UART2_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__UART3_RXD		IOMUX_PAD(0x630, 0x240, 1, 0x9f4, 4, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_UART3_RXD__GPIO_1_22           IOMUX_PAD(0x630, 0x240, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__UART3_TXD		IOMUX_PAD(0x634, 0x244, 1, 0x0,   0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_UART3_TXD__GPIO_1_23           IOMUX_PAD(0x634, 0x244, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_OWIRE_LINE__GPIO_1_24          IOMUX_PAD(0x638, 0x248, 3, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW0__KEY_ROW0             IOMUX_PAD(0x63C, 0x24C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW1__KEY_ROW1             IOMUX_PAD(0x640, 0x250, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW2__KEY_ROW2             IOMUX_PAD(0x644, 0x254, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_ROW3__KEY_ROW3             IOMUX_PAD(0x648, 0x258, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL0__KEY_COL0             IOMUX_PAD(0x64C, 0x25C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL1__KEY_COL1             IOMUX_PAD(0x650, 0x260, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL2__KEY_COL2             IOMUX_PAD(0x654, 0x264, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL3__KEY_COL3             IOMUX_PAD(0x658, 0x268, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__KEY_COL4             IOMUX_PAD(0x65C, 0x26C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__UART3_RTS		IOMUX_PAD(0x65C, 0x26C, 2, 0x9f0, 4, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_KEY_COL4__I2C2_SCL		IOMUX_PAD(0x65C, 0x26C, (3 | IOMUX_CONFIG_SION), \
-							0x09b8, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__KEY_COL5             IOMUX_PAD(0x660, 0x270, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__UART3_CTS		IOMUX_PAD(0x660, 0x270, 2, 0,     0, MX51_UART3_PAD_CTRL)
-#define MX51_PAD_KEY_COL5__I2C2_SDA		IOMUX_PAD(0x660, 0x270, (3 | IOMUX_CONFIG_SION), \
-							0x09bc, 1, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_USBH1_CLK__USBH1_CLK           IOMUX_PAD(0x678, 0x278, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DIR__USBH1_DIR           IOMUX_PAD(0x67C, 0x27C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__USBH1_STP           IOMUX_PAD(0x680, 0x280, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_STP__GPIO_1_27           IOMUX_PAD(0x680, 0x280, 2, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_NXT__USBH1_NXT           IOMUX_PAD(0x684, 0x284, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA0__USBH1_DATA0       IOMUX_PAD(0x688, 0x288, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA1__USBH1_DATA1       IOMUX_PAD(0x68C, 0x28C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA2__USBH1_DATA2       IOMUX_PAD(0x690, 0x290, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA3__USBH1_DATA3       IOMUX_PAD(0x694, 0x294, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA4__USBH1_DATA4       IOMUX_PAD(0x698, 0x298, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA5__USBH1_DATA5       IOMUX_PAD(0x69C, 0x29C, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA6__USBH1_DATA6       IOMUX_PAD(0x6A0, 0x2A0, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_USBH1_DATA7__USBH1_DATA7       IOMUX_PAD(0x6A4, 0x2A4, 0, 0x0,   0, MX51_USBH1_PAD_CTRL)
-#define MX51_PAD_DI1_PIN11__GPIO_3_0            IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN12__GPIO_3_1            IOMUX_PAD(0x6AC, 0x2AC, 4, 0x978, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN13__GPIO_3_2            IOMUX_PAD(0x6B0, 0x2B0, 4, 0x97c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D0_CS__GPIO_3_3            IOMUX_PAD(0x6B4, 0x2B4, 4, 0x980, 1, NO_PAD_CTRL)
-#define MX51_PAD_DI1_D1_CS__GPIO_3_4            IOMUX_PAD(0x6B8, 0x2B8, 4, 0x984, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIN__GPIO_3_5       IOMUX_PAD(0x6BC, 0x2BC, 4, 0x988, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_DIO__GPIO_3_6       IOMUX_PAD(0x6C0, 0x2C0, 4, 0x98c, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_CLK__GPIO_3_7       IOMUX_PAD(0x6C4, 0x2C4, 4, 0x990, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISPB2_SER_RS__GPIO_3_8        IOMUX_PAD(0x6C8, 0x2C8, 4, 0x994, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT0__DISP1_DAT0         IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT1__DISP1_DAT1         IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT2__DISP1_DAT2         IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT3__DISP1_DAT3         IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT4__DISP1_DAT4         IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT5__DISP1_DAT5         IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT6__DISP1_DAT6         IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT7__DISP1_DAT7         IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT8__DISP1_DAT8         IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT9__DISP1_DAT9         IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT10__DISP1_DAT10       IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT11__DISP1_DAT11       IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT12__DISP1_DAT12       IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT13__DISP1_DAT13       IOMUX_PAD(0x700, 0x300, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT14__DISP1_DAT14       IOMUX_PAD(0x704, 0x304, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT15__DISP1_DAT15       IOMUX_PAD(0x708, 0x308, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT16__DISP1_DAT16       IOMUX_PAD(0x70C, 0x30C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT17__DISP1_DAT17       IOMUX_PAD(0x710, 0x310, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT18__DISP1_DAT18       IOMUX_PAD(0x714, 0x314, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT19__DISP1_DAT19       IOMUX_PAD(0x718, 0x318, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT20__DISP1_DAT20       IOMUX_PAD(0x71C, 0x31C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT21__DISP1_DAT21       IOMUX_PAD(0x720, 0x320, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT22__DISP1_DAT22       IOMUX_PAD(0x724, 0x324, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP1_DAT23__DISP1_DAT23       IOMUX_PAD(0x728, 0x328, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN3__DI1_PIN3             IOMUX_PAD(0x72C, 0x32C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI1_PIN2__DI1_PIN2             IOMUX_PAD(0x734, 0x330, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP1__DI_GP1                 IOMUX_PAD(0x73C, 0x334, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP2__DI_GP2                 IOMUX_PAD(0x740, 0x338, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP3__DI_GP3                 IOMUX_PAD(0x744, 0x33C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN4__DI2_PIN4             IOMUX_PAD(0x748, 0x340, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN2__DI2_PIN2             IOMUX_PAD(0x74C, 0x344, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_PIN3__DI2_PIN3             IOMUX_PAD(0x750, 0x348, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK     IOMUX_PAD(0x754, 0x34C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DI_GP4__DI_GP4                 IOMUX_PAD(0x758, 0x350, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT0__DISP2_DAT0         IOMUX_PAD(0x75C, 0x354, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT1__DISP2_DAT1         IOMUX_PAD(0x760, 0x358, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT2__DISP2_DAT2         IOMUX_PAD(0x764, 0x35C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT3__DISP2_DAT3         IOMUX_PAD(0x768, 0x360, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT4__DISP2_DAT4         IOMUX_PAD(0x76C, 0x364, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT5__DISP2_DAT5         IOMUX_PAD(0x770, 0x368, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT6__GPIO_1_19          IOMUX_PAD(0x774, 0x36C, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT7__GPIO_1_29          IOMUX_PAD(0x778, 0x370, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT8__GPIO_1_30          IOMUX_PAD(0x77C, 0x374, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT9__GPIO_1_31          IOMUX_PAD(0x780, 0x378, 5, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT10__DISP2_DAT10       IOMUX_PAD(0x784, 0x37C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__DISP2_DAT11       IOMUX_PAD(0x788, 0x380, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT12__DISP2_DAT12       IOMUX_PAD(0x78C, 0x384, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT13__DISP2_DAT13       IOMUX_PAD(0x790, 0x388, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT14__DISP2_DAT14       IOMUX_PAD(0x794, 0x38C, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT15__DISP2_DAT15       IOMUX_PAD(0x798, 0x390, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__SD1_CMD		IOMUX_PAD(0x79C, 0x394, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_CMD__AUD5_RXFS             IOMUX_PAD(0x79C, 0x394, 1, 0x8e0, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_CLK__SD1_CLK		IOMUX_PAD(0x7A0, 0x398, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD1_CLK__AUD5_RXC              IOMUX_PAD(0x7A0, 0x398, 1, 0x8dc, 1, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__SD1_DATA0		IOMUX_PAD(0x7A4, 0x39C, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA0__AUD5_TXD            IOMUX_PAD(0x7A4, 0x39C, 1, 0x8d8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__SD1_DATA1		IOMUX_PAD(0x7A8, 0x3A0, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA1__AUD5_RXD            IOMUX_PAD(0x7A8, 0x3A0, 1, 0x8d4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__SD1_DATA2		IOMUX_PAD(0x7AC, 0x3A4, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA2__AUD5_TXC            IOMUX_PAD(0x7AC, 0x3A4, 1, 0x8e4, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__SD1_DATA3		IOMUX_PAD(0x7B0, 0x3A8, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD1_DATA3__AUD5_TXFS           IOMUX_PAD(0x7B0, 0x3A8, 1, 0x8e8, 2, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__SD2_CMD		IOMUX_PAD(0x7BC, 0x3B4, IOMUX_CONFIG_SION, 0x0, 1, \
-							MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_CLK__SD2_CLK		IOMUX_PAD(0x7C0, 0x3B8, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_SD2_DATA0__SD2_DATA0		IOMUX_PAD(0x7C4, 0x3BC, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__SD2_DATA1		IOMUX_PAD(0x7C8, 0x3C0, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__SD2_DATA2		IOMUX_PAD(0x7CC, 0x3C4, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA3__SD2_DATA3		IOMUX_PAD(0x7D0, 0x3C8, IOMUX_CONFIG_SION, 0x0, 0, \
-							MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_GPIO_1_0__GPIO_1_0		IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_1__GPIO_1_1		IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_2__GPIO_1_2		IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_2__I2C2_SCL		IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \
-							0x9b8,   3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_GPIO_1_3__GPIO_1_3		IOMUX_PAD(0x7D8, 0x3D0, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_3__I2C2_SDA		IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \
-							0x9bc,   3, MX51_I2C_PAD_CTRL)
-#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_4__GPIO_1_4		IOMUX_PAD(0x804, 0x3D8, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_5__GPIO_1_5		IOMUX_PAD(0x808, 0x3DC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_6__GPIO_1_6		IOMUX_PAD(0x80C, 0x3E0, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_7__GPIO_1_7		IOMUX_PAD(0x810, 0x3E4, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_8__GPIO_1_8		IOMUX_PAD(0x814, 0x3E8, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
-#define MX51_PAD_GPIO_1_9__GPIO_1_9		IOMUX_PAD(0x818, 0x3EC, 1, 0x0,   0, MX51_GPIO_PAD_CTRL)
+/* Raw pin modes without pad control */
+/*							  PAD    MUX ALT INPSE PATH PADCTRL */
+#define _MX51_PAD_EIM_D16__AUD4_RXFS		IOMUX_PAD(0x3f0, 0x5c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D16__AUD5_TXD		IOMUX_PAD(0x3f0, 0x5c, 7, 0x08d8, 0, 0)
+#define _MX51_PAD_EIM_D16__EIM_D16		IOMUX_PAD(0x3f0, 0x5c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D16__GPIO2_0		IOMUX_PAD(0x3f0, 0x5c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D16__I2C1_SDA		IOMUX_PAD(0x3f0, 0x5c, 0x14, 0x09b4, 0, 0)
+#define _MX51_PAD_EIM_D16__UART2_CTS		IOMUX_PAD(0x3f0, 0x5c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D16__USBH2_DATA0		IOMUX_PAD(0x3f0, 0x5c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D17__AUD5_RXD		IOMUX_PAD(0x3f4, 0x60, 7, 0x08d4, 0, 0)
+#define _MX51_PAD_EIM_D17__EIM_D17		IOMUX_PAD(0x3f4, 0x60, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D17__GPIO2_1		IOMUX_PAD(0x3f4, 0x60, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D17__UART2_RXD		IOMUX_PAD(0x3f4, 0x60, 3, 0x09ec, 0, 0)
+#define _MX51_PAD_EIM_D17__UART3_CTS		IOMUX_PAD(0x3f4, 0x60, 4, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D17__USBH2_DATA1		IOMUX_PAD(0x3f4, 0x60, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D18__AUD5_TXC		IOMUX_PAD(0x3f8, 0x64, 7, 0x08e4, 0, 0)
+#define _MX51_PAD_EIM_D18__EIM_D18		IOMUX_PAD(0x3f8, 0x64, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D18__GPIO2_2		IOMUX_PAD(0x3f8, 0x64, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D18__UART2_TXD		IOMUX_PAD(0x3f8, 0x64, 3, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D18__UART3_RTS		IOMUX_PAD(0x3f8, 0x64, 4, 0x09f0, 1, 0)
+#define _MX51_PAD_EIM_D18__USBH2_DATA2		IOMUX_PAD(0x3f8, 0x64, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D19__AUD4_RXC		IOMUX_PAD(0x3fc, 0x68, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D19__AUD5_TXFS		IOMUX_PAD(0x3fc, 0x68, 7, 0x08e8, 0, 0)
+#define _MX51_PAD_EIM_D19__EIM_D19		IOMUX_PAD(0x3fc, 0x68, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D19__GPIO2_3		IOMUX_PAD(0x3fc, 0x68, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D19__I2C1_SCL		IOMUX_PAD(0x3fc, 0x68, 0x14, 0x09b0, 0, 0)
+#define _MX51_PAD_EIM_D19__UART2_RTS		IOMUX_PAD(0x3fc, 0x68, 3, 0x09e8, 1, 0)
+#define _MX51_PAD_EIM_D19__USBH2_DATA3		IOMUX_PAD(0x3fc, 0x68, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D20__AUD4_TXD		IOMUX_PAD(0x400, 0x6c, 5, 0x08c8, 0, 0)
+#define _MX51_PAD_EIM_D20__EIM_D20		IOMUX_PAD(0x400, 0x6c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D20__GPIO2_4		IOMUX_PAD(0x400, 0x6c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D20__SRTC_ALARM_DEB	IOMUX_PAD(0x400, 0x6c, 4, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D20__USBH2_DATA4		IOMUX_PAD(0x400, 0x6c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D21__AUD4_RXD		IOMUX_PAD(0x404, 0x70, 5, 0x08c4, 0, 0)
+#define _MX51_PAD_EIM_D21__EIM_D21		IOMUX_PAD(0x404, 0x70, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D21__GPIO2_5		IOMUX_PAD(0x404, 0x70, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D21__SRTC_ALARM_DEB	IOMUX_PAD(0x404, 0x70, 3, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D21__USBH2_DATA5		IOMUX_PAD(0x404, 0x70, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D22__AUD4_TXC		IOMUX_PAD(0x408, 0x74, 5, 0x08cc, 0, 0)
+#define _MX51_PAD_EIM_D22__EIM_D22		IOMUX_PAD(0x408, 0x74, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D22__GPIO2_6		IOMUX_PAD(0x408, 0x74, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D22__USBH2_DATA6		IOMUX_PAD(0x408, 0x74, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D23__AUD4_TXFS		IOMUX_PAD(0x40c, 0x78, 5, 0x08d0, 0, 0)
+#define _MX51_PAD_EIM_D23__EIM_D23		IOMUX_PAD(0x40c, 0x78, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D23__GPIO2_7		IOMUX_PAD(0x40c, 0x78, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D23__SPDIF_OUT1		IOMUX_PAD(0x40c, 0x78, 4, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D23__USBH2_DATA7		IOMUX_PAD(0x40c, 0x78, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D24__AUD6_RXFS		IOMUX_PAD(0x410, 0x7c, 5, 0x08f8, 0, 0)
+#define _MX51_PAD_EIM_D24__EIM_D24		IOMUX_PAD(0x410, 0x7c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D24__GPIO2_8		IOMUX_PAD(0x410, 0x7c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D24__I2C2_SDA		IOMUX_PAD(0x410, 0x7c, 0x14, 0x09bc, 0, 0)
+#define _MX51_PAD_EIM_D24__UART3_CTS		IOMUX_PAD(0x410, 0x7c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D24__USBOTG_DATA0		IOMUX_PAD(0x410, 0x7c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D25__EIM_D25		IOMUX_PAD(0x414, 0x80, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D25__KEY_COL6		IOMUX_PAD(0x414, 0x80, 1, 0x09c8, 0, 0)
+#define _MX51_PAD_EIM_D25__UART2_CTS		IOMUX_PAD(0x414, 0x80, 4, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D25__UART3_RXD		IOMUX_PAD(0x414, 0x80, 3, 0x09f4, 0, 0)
+#define _MX51_PAD_EIM_D25__USBOTG_DATA1		IOMUX_PAD(0x414, 0x80, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D26__EIM_D26		IOMUX_PAD(0x418, 0x84, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D26__KEY_COL7		IOMUX_PAD(0x418, 0x84, 1, 0x09cc, 0, 0)
+#define _MX51_PAD_EIM_D26__UART2_RTS		IOMUX_PAD(0x418, 0x84, 4, 0x09e8, 3, 0)
+#define _MX51_PAD_EIM_D26__UART3_TXD		IOMUX_PAD(0x418, 0x84, 3, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D26__USBOTG_DATA2		IOMUX_PAD(0x418, 0x84, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D27__AUD6_RXC		IOMUX_PAD(0x41c, 0x88, 5, 0x08f4, 0, 0)
+#define _MX51_PAD_EIM_D27__EIM_D27		IOMUX_PAD(0x41c, 0x88, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D27__GPIO2_9		IOMUX_PAD(0x41c, 0x88, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D27__I2C2_SCL		IOMUX_PAD(0x41c, 0x88, 0x14, 0x09b8, 0, 0)
+#define _MX51_PAD_EIM_D27__UART3_RTS		IOMUX_PAD(0x41c, 0x88, 3, 0x09f0, 3, 0)
+#define _MX51_PAD_EIM_D27__USBOTG_DATA3		IOMUX_PAD(0x41c, 0x88, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D28__AUD6_TXD		IOMUX_PAD(0x420, 0x8c, 5, 0x08f0, 0, 0)
+#define _MX51_PAD_EIM_D28__EIM_D28		IOMUX_PAD(0x420, 0x8c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D28__KEY_ROW4		IOMUX_PAD(0x420, 0x8c, 1, 0x09d0, 0, 0)
+#define _MX51_PAD_EIM_D28__USBOTG_DATA4		IOMUX_PAD(0x420, 0x8c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D29__AUD6_RXD		IOMUX_PAD(0x424, 0x90, 5, 0x08ec, 0, 0)
+#define _MX51_PAD_EIM_D29__EIM_D29		IOMUX_PAD(0x424, 0x90, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D29__KEY_ROW5		IOMUX_PAD(0x424, 0x90, 1, 0x09d4, 0, 0)
+#define _MX51_PAD_EIM_D29__USBOTG_DATA5		IOMUX_PAD(0x424, 0x90, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D30__AUD6_TXC		IOMUX_PAD(0x428, 0x94, 5, 0x08fc, 0, 0)
+#define _MX51_PAD_EIM_D30__EIM_D30		IOMUX_PAD(0x428, 0x94, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D30__KEY_ROW6		IOMUX_PAD(0x428, 0x94, 1, 0x09d8, 0, 0)
+#define _MX51_PAD_EIM_D30__USBOTG_DATA6		IOMUX_PAD(0x428, 0x94, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D31__AUD6_TXFS		IOMUX_PAD(0x42c, 0x98, 5, 0x0900, 0, 0)
+#define _MX51_PAD_EIM_D31__EIM_D31		IOMUX_PAD(0x42c, 0x98, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_D31__KEY_ROW7		IOMUX_PAD(0x42c, 0x98, 1, 0x09dc, 0, 0)
+#define _MX51_PAD_EIM_D31__USBOTG_DATA7		IOMUX_PAD(0x42c, 0x98, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A16__EIM_A16		IOMUX_PAD(0x430, 0x9c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A16__GPIO2_10		IOMUX_PAD(0x430, 0x9c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A16__OSC_FREQ_SEL0	IOMUX_PAD(0x430, 0x9c, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A17__EIM_A17		IOMUX_PAD(0x434, 0xa0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A17__GPIO2_11		IOMUX_PAD(0x434, 0xa0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A17__OSC_FREQ_SEL1	IOMUX_PAD(0x434, 0xa0, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A18__BOOT_LPB0		IOMUX_PAD(0x438, 0xa4, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A18__EIM_A18		IOMUX_PAD(0x438, 0xa4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A18__GPIO2_12		IOMUX_PAD(0x438, 0xa4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A19__BOOT_LPB1		IOMUX_PAD(0x43c, 0xa8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A19__EIM_A19		IOMUX_PAD(0x43c, 0xa8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A19__GPIO2_13		IOMUX_PAD(0x43c, 0xa8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A20__BOOT_UART_SRC0	IOMUX_PAD(0x440, 0xac, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A20__EIM_A20		IOMUX_PAD(0x440, 0xac, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A20__GPIO2_14		IOMUX_PAD(0x440, 0xac, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A21__BOOT_UART_SRC1	IOMUX_PAD(0x444, 0xb0, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A21__EIM_A21		IOMUX_PAD(0x444, 0xb0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A21__GPIO2_15		IOMUX_PAD(0x444, 0xb0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A22__EIM_A22		IOMUX_PAD(0x448, 0xb4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A22__GPIO2_16		IOMUX_PAD(0x448, 0xb4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A23__BOOT_HPN_EN		IOMUX_PAD(0x44c, 0xb8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A23__EIM_A23		IOMUX_PAD(0x44c, 0xb8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A23__GPIO2_17		IOMUX_PAD(0x44c, 0xb8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A24__EIM_A24		IOMUX_PAD(0x450, 0xbc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A24__GPIO2_18		IOMUX_PAD(0x450, 0xbc, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A24__USBH2_CLK		IOMUX_PAD(0x450, 0xbc, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A25__DISP1_PIN4		IOMUX_PAD(0x454, 0xc0, 6, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A25__EIM_A25		IOMUX_PAD(0x454, 0xc0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A25__GPIO2_19		IOMUX_PAD(0x454, 0xc0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A25__USBH2_DIR		IOMUX_PAD(0x454, 0xc0, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A26__CSI1_DATA_EN		IOMUX_PAD(0x458, 0xc4, 5, 0x09a0, 0, 0)
+#define _MX51_PAD_EIM_A26__DISP2_EXT_CLK	IOMUX_PAD(0x458, 0xc4, 6, 0x0908, 0, 0)
+#define _MX51_PAD_EIM_A26__EIM_A26		IOMUX_PAD(0x458, 0xc4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A26__GPIO2_20		IOMUX_PAD(0x458, 0xc4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A26__USBH2_STP		IOMUX_PAD(0x458, 0xc4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A27__CSI2_DATA_EN		IOMUX_PAD(0x45c, 0xc8, 5, 0x099c, 0, 0)
+#define _MX51_PAD_EIM_A27__DISP1_PIN1		IOMUX_PAD(0x45c, 0xc8, 6, 0x09a4, 0, 0)
+#define _MX51_PAD_EIM_A27__EIM_A27		IOMUX_PAD(0x45c, 0xc8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A27__GPIO2_21		IOMUX_PAD(0x45c, 0xc8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_A27__USBH2_NXT		IOMUX_PAD(0x45c, 0xc8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB0__EIM_EB0		IOMUX_PAD(0x460, 0xcc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB1__EIM_EB1		IOMUX_PAD(0x464, 0xd0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB2__AUD5_RXFS		IOMUX_PAD(0x468, 0xd4, 6, 0x08e0, 0, 0)
+#define _MX51_PAD_EIM_EB2__CSI1_D2		IOMUX_PAD(0x468, 0xd4, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB2__EIM_EB2		IOMUX_PAD(0x468, 0xd4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB2__FEC_MDIO		IOMUX_PAD(0x468, 0xd4, 3, 0x0954, 0, 0)
+#define _MX51_PAD_EIM_EB2__GPIO2_22		IOMUX_PAD(0x468, 0xd4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB2__GPT_CMPOUT1		IOMUX_PAD(0x468, 0xd4, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB3__AUD5_RXC		IOMUX_PAD(0x46c, 0xd8, 6, 0x08dc, 0, 0)
+#define _MX51_PAD_EIM_EB3__CSI1_D3		IOMUX_PAD(0x46c, 0xd8, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB3__EIM_EB3		IOMUX_PAD(0x46c, 0xd8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB3__FEC_RDATA1		IOMUX_PAD(0x46c, 0xd8, 3, 0x095c, 0, 0)
+#define _MX51_PAD_EIM_EB3__GPIO2_23		IOMUX_PAD(0x46c, 0xd8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_EB3__GPT_CMPOUT2		IOMUX_PAD(0x46c, 0xd8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_OE__EIM_OE		IOMUX_PAD(0x470, 0xdc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_OE__GPIO2_24		IOMUX_PAD(0x470, 0xdc, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS0__EIM_CS0		IOMUX_PAD(0x474, 0xe0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS0__GPIO2_25		IOMUX_PAD(0x474, 0xe0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS1__EIM_CS1		IOMUX_PAD(0x478, 0xe4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS1__GPIO2_26		IOMUX_PAD(0x478, 0xe4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS2__AUD5_TXD		IOMUX_PAD(0x47c, 0xe8, 6, 0x08d8, 1, 0)
+#define _MX51_PAD_EIM_CS2__CSI1_D4		IOMUX_PAD(0x47c, 0xe8, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS2__EIM_CS2		IOMUX_PAD(0x47c, 0xe8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS2__FEC_RDATA2		IOMUX_PAD(0x47c, 0xe8, 3, 0x0960, 0, 0)
+#define _MX51_PAD_EIM_CS2__GPIO2_27		IOMUX_PAD(0x47c, 0xe8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS2__USBOTG_STP		IOMUX_PAD(0x47c, 0xe8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS3__AUD5_RXD		IOMUX_PAD(0x480, 0xec, 6, 0x08d4, 1, 0)
+#define _MX51_PAD_EIM_CS3__CSI1_D5		IOMUX_PAD(0x480, 0xec, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS3__EIM_CS3		IOMUX_PAD(0x480, 0xec, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS3__FEC_RDATA3		IOMUX_PAD(0x480, 0xec, 3, 0x0964, 0, 0)
+#define _MX51_PAD_EIM_CS3__GPIO2_28		IOMUX_PAD(0x480, 0xec, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS3__USBOTG_NXT		IOMUX_PAD(0x480, 0xec, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS4__AUD5_TXC		IOMUX_PAD(0x484, 0xf0, 6, 0x08e4, 1, 0)
+#define _MX51_PAD_EIM_CS4__CSI1_D6		IOMUX_PAD(0x484, 0xf0, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS4__EIM_CS4		IOMUX_PAD(0x484, 0xf0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS4__FEC_RX_ER		IOMUX_PAD(0x484, 0xf0, 3, 0x0970, 0, 0)
+#define _MX51_PAD_EIM_CS4__GPIO2_29		IOMUX_PAD(0x484, 0xf0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS4__USBOTG_CLK		IOMUX_PAD(0x484, 0xf0, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS5__AUD5_TXFS		IOMUX_PAD(0x488, 0xf4, 6, 0x08e8, 1, 0)
+#define _MX51_PAD_EIM_CS5__CSI1_D7		IOMUX_PAD(0x488, 0xf4, 5, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS5__DISP1_EXT_CLK	IOMUX_PAD(0x488, 0xf4, 4, 0x0904, 0, 0)
+#define _MX51_PAD_EIM_CS5__EIM_CS5		IOMUX_PAD(0x488, 0xf4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS5__FEC_CRS		IOMUX_PAD(0x488, 0xf4, 3, 0x0950, 0, 0)
+#define _MX51_PAD_EIM_CS5__GPIO2_30		IOMUX_PAD(0x488, 0xf4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CS5__USBOTG_DIR		IOMUX_PAD(0x488, 0xf4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DTACK__EIM_DTACK		IOMUX_PAD(0x48c, 0xf8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DTACK__GPIO2_31		IOMUX_PAD(0x48c, 0xf8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_LBA__EIM_LBA		IOMUX_PAD(0x494, 0xfc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_LBA__GPIO3_1		IOMUX_PAD(0x494, 0xfc, 1, 0x0978, 0, 0)
+#define _MX51_PAD_EIM_CRE__EIM_CRE		IOMUX_PAD(0x4a0, 0x100, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_CRE__GPIO3_2		IOMUX_PAD(0x4a0, 0x100, 1, 0x097c, 0, 0)
+#define _MX51_PAD_DRAM_CS1__DRAM_CS1		IOMUX_PAD(0x4d0, 0x104, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WE_B__GPIO3_3		IOMUX_PAD(0x4e4, 0x108, 3, 0x0980, 0, 0)
+#define _MX51_PAD_NANDF_WE_B__NANDF_WE_B	IOMUX_PAD(0x4e4, 0x108, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WE_B__PATA_DIOW		IOMUX_PAD(0x4e4, 0x108, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WE_B__SD3_DATA0		IOMUX_PAD(0x4e4, 0x108, 2, 0x093c, 0, 0)
+#define _MX51_PAD_NANDF_RE_B__GPIO3_4		IOMUX_PAD(0x4e8, 0x10c, 3, 0x0984, 0, 0)
+#define _MX51_PAD_NANDF_RE_B__NANDF_RE_B	IOMUX_PAD(0x4e8, 0x10c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RE_B__PATA_DIOR		IOMUX_PAD(0x4e8, 0x10c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RE_B__SD3_DATA1		IOMUX_PAD(0x4e8, 0x10c, 2, 0x0940, 0, 0)
+#define _MX51_PAD_NANDF_ALE__GPIO3_5		IOMUX_PAD(0x4ec, 0x110, 3, 0x0988, 0, 0)
+#define _MX51_PAD_NANDF_ALE__NANDF_ALE		IOMUX_PAD(0x4ec, 0x110, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_ALE__PATA_BUFFER_EN	IOMUX_PAD(0x4ec, 0x110, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CLE__GPIO3_6		IOMUX_PAD(0x4f0, 0x114, 3, 0x098c, 0, 0)
+#define _MX51_PAD_NANDF_CLE__NANDF_CLE		IOMUX_PAD(0x4f0, 0x114, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CLE__PATA_RESET_B	IOMUX_PAD(0x4f0, 0x114, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WP_B__GPIO3_7		IOMUX_PAD(0x4f4, 0x118, 3, 0x0990, 0, 0)
+#define _MX51_PAD_NANDF_WP_B__NANDF_WP_B	IOMUX_PAD(0x4f4, 0x118, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WP_B__PATA_DMACK	IOMUX_PAD(0x4f4, 0x118, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_WP_B__SD3_DATA2		IOMUX_PAD(0x4f4, 0x118, 2, 0x0944, 0, 0)
+#define _MX51_PAD_NANDF_RB0__ECSPI2_SS1		IOMUX_PAD(0x4f8, 0x11c, 5, 0x0930, 0, 0)
+#define _MX51_PAD_NANDF_RB0__GPIO3_8		IOMUX_PAD(0x4f8, 0x11c, 3, 0x0994, 0, 0)
+#define _MX51_PAD_NANDF_RB0__NANDF_RB0		IOMUX_PAD(0x4f8, 0x11c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB0__PATA_DMARQ		IOMUX_PAD(0x4f8, 0x11c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB0__SD3_DATA3		IOMUX_PAD(0x4f8, 0x11c, 2, 0x0948, 0, 0)
+#define _MX51_PAD_NANDF_RB1__CSPI_MOSI		IOMUX_PAD(0x4fc, 0x120, 6, 0x091c, 0, 0)
+#define _MX51_PAD_NANDF_RB1__ECSPI2_RDY		IOMUX_PAD(0x4fc, 0x120, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB1__GPIO3_9		IOMUX_PAD(0x4fc, 0x120, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB1__NANDF_RB1		IOMUX_PAD(0x4fc, 0x120, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB1__PATA_IORDY		IOMUX_PAD(0x4fc, 0x120, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB1__SD4_CMD		IOMUX_PAD(0x4fc, 0x120, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB2__DISP2_WAIT		IOMUX_PAD(0x500, 0x124, 5, 0x09a8, 0, 0)
+#define _MX51_PAD_NANDF_RB2__ECSPI2_SCLK	IOMUX_PAD(0x500, 0x124, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB2__FEC_COL		IOMUX_PAD(0x500, 0x124, 1, 0x094c, 0, 0)
+#define _MX51_PAD_NANDF_RB2__GPIO3_10		IOMUX_PAD(0x500, 0x124, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB2__NANDF_RB2		IOMUX_PAD(0x500, 0x124, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB2__USBH3_H3_DP	IOMUX_PAD(0x500, 0x124, 7, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB2__USBH3_NXT		IOMUX_PAD(0x500, 0x124, 6, 0x0a20, 0, 0)
+#define _MX51_PAD_NANDF_RB3__DISP1_WAIT		IOMUX_PAD(0x504, 0x128, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB3__ECSPI2_MISO	IOMUX_PAD(0x504, 0x128, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB3__FEC_RX_CLK		IOMUX_PAD(0x504, 0x128, 1, 0x0968, 0, 0)
+#define _MX51_PAD_NANDF_RB3__GPIO3_11		IOMUX_PAD(0x504, 0x128, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB3__NANDF_RB3		IOMUX_PAD(0x504, 0x128, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RB3__USBH3_CLK		IOMUX_PAD(0x504, 0x128, 6, 0x09f8, 0, 0)
+#define _MX51_PAD_NANDF_RB3__USBH3_H3_DM	IOMUX_PAD(0x504, 0x128, 7, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO_NAND__GPIO_NAND		IOMUX_PAD(0x514, 0x12c, 0, 0x0998, 0, 0)
+#define _MX51_PAD_GPIO_NAND__PATA_INTRQ		IOMUX_PAD(0x514, 0x12c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS0__GPIO3_16		IOMUX_PAD(0x518, 0x130, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS0__NANDF_CS0		IOMUX_PAD(0x518, 0x130, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS1__GPIO3_17		IOMUX_PAD(0x51c, 0x134, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS1__NANDF_CS1		IOMUX_PAD(0x51c, 0x134, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__CSPI_SCLK		IOMUX_PAD(0x520, 0x138, 6, 0x0914, 0, 0)
+#define _MX51_PAD_NANDF_CS2__FEC_TX_ER		IOMUX_PAD(0x520, 0x138, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__GPIO3_18		IOMUX_PAD(0x520, 0x138, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__NANDF_CS2		IOMUX_PAD(0x520, 0x138, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__PATA_CS_0		IOMUX_PAD(0x520, 0x138, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__SD4_CLK		IOMUX_PAD(0x520, 0x138, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS2__USBH3_H1_DP	IOMUX_PAD(0x520, 0x138, 7, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__FEC_MDC		IOMUX_PAD(0x524, 0x13c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__GPIO3_19		IOMUX_PAD(0x524, 0x13c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__NANDF_CS3		IOMUX_PAD(0x524, 0x13c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__PATA_CS_1		IOMUX_PAD(0x524, 0x13c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__SD4_DAT0		IOMUX_PAD(0x524, 0x13c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS3__USBH3_H1_DM	IOMUX_PAD(0x524, 0x13c, 7, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__FEC_TDATA1		IOMUX_PAD(0x528, 0x140, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__GPIO3_20		IOMUX_PAD(0x528, 0x140, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__NANDF_CS4		IOMUX_PAD(0x528, 0x140, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__PATA_DA_0		IOMUX_PAD(0x528, 0x140, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__SD4_DAT1		IOMUX_PAD(0x528, 0x140, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS4__USBH3_STP		IOMUX_PAD(0x528, 0x140, 7, 0x0a24, 0, 0)
+#define _MX51_PAD_NANDF_CS5__FEC_TDATA2		IOMUX_PAD(0x52c, 0x144, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS5__GPIO3_21		IOMUX_PAD(0x52c, 0x144, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS5__NANDF_CS5		IOMUX_PAD(0x52c, 0x144, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS5__PATA_DA_1		IOMUX_PAD(0x52c, 0x144, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS5__SD4_DAT2		IOMUX_PAD(0x52c, 0x144, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS5__USBH3_DIR		IOMUX_PAD(0x52c, 0x144, 7, 0x0a1c, 0, 0)
+#define _MX51_PAD_NANDF_CS6__CSPI_SS3		IOMUX_PAD(0x530, 0x148, 7, 0x0928, 0, 0)
+#define _MX51_PAD_NANDF_CS6__FEC_TDATA3		IOMUX_PAD(0x530, 0x148, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS6__GPIO3_22		IOMUX_PAD(0x530, 0x148, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS6__NANDF_CS6		IOMUX_PAD(0x530, 0x148, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS6__PATA_DA_2		IOMUX_PAD(0x530, 0x148, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS6__SD4_DAT3		IOMUX_PAD(0x530, 0x148, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS7__FEC_TX_EN		IOMUX_PAD(0x534, 0x14c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS7__GPIO3_23		IOMUX_PAD(0x534, 0x14c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS7__NANDF_CS7		IOMUX_PAD(0x534, 0x14c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_CS7__SD3_CLK		IOMUX_PAD(0x534, 0x14c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0	IOMUX_PAD(0x538, 0x150, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	IOMUX_PAD(0x538, 0x150, 1, 0x0974, 0, 0)
+#define _MX51_PAD_NANDF_RDY_INT__GPIO3_24	IOMUX_PAD(0x538, 0x150, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT	IOMUX_PAD(0x538, 0x150, 0, 0x0938, 0, 0)
+#define _MX51_PAD_NANDF_RDY_INT__SD3_CMD	IOMUX_PAD(0x538, 0x150, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D15__ECSPI2_MOSI	IOMUX_PAD(0x53c, 0x154, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D15__GPIO3_25		IOMUX_PAD(0x53c, 0x154, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D15__NANDF_D15		IOMUX_PAD(0x53c, 0x154, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D15__PATA_DATA15	IOMUX_PAD(0x53c, 0x154, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D15__SD3_DAT7		IOMUX_PAD(0x53c, 0x154, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D14__ECSPI2_SS3		IOMUX_PAD(0x540, 0x158, 2, 0x0934, 0, 0)
+#define _MX51_PAD_NANDF_D14__GPIO3_26		IOMUX_PAD(0x540, 0x158, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D14__NANDF_D14		IOMUX_PAD(0x540, 0x158, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D14__PATA_DATA14	IOMUX_PAD(0x540, 0x158, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D14__SD3_DAT6		IOMUX_PAD(0x540, 0x158, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D13__ECSPI2_SS2		IOMUX_PAD(0x544, 0x15c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D13__GPIO3_27		IOMUX_PAD(0x544, 0x15c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D13__NANDF_D13		IOMUX_PAD(0x544, 0x15c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D13__PATA_DATA13	IOMUX_PAD(0x544, 0x15c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D13__SD3_DAT5		IOMUX_PAD(0x544, 0x15c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D12__ECSPI2_SS1		IOMUX_PAD(0x548, 0x160, 2, 0x0930, 1, 0)
+#define _MX51_PAD_NANDF_D12__GPIO3_28		IOMUX_PAD(0x548, 0x160, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D12__NANDF_D12		IOMUX_PAD(0x548, 0x160, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D12__PATA_DATA12	IOMUX_PAD(0x548, 0x160, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D12__SD3_DAT4		IOMUX_PAD(0x548, 0x160, 5, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D11__FEC_RX_DV		IOMUX_PAD(0x54c, 0x164, 2, 0x096c, 0, 0)
+#define _MX51_PAD_NANDF_D11__GPIO3_29		IOMUX_PAD(0x54c, 0x164, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D11__NANDF_D11		IOMUX_PAD(0x54c, 0x164, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D11__PATA_DATA11	IOMUX_PAD(0x54c, 0x164, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D11__SD3_DATA3		IOMUX_PAD(0x54c, 0x164, 5, 0x0948, 1, 0)
+#define _MX51_PAD_NANDF_D10__GPIO3_30		IOMUX_PAD(0x550, 0x168, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D10__NANDF_D10		IOMUX_PAD(0x550, 0x168, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D10__PATA_DATA10	IOMUX_PAD(0x550, 0x168, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D10__SD3_DATA2		IOMUX_PAD(0x550, 0x168, 5, 0x0944, 1, 0)
+#define _MX51_PAD_NANDF_D9__FEC_RDATA0		IOMUX_PAD(0x554, 0x16c, 0x12, 0x0958, 0, 0)
+#define _MX51_PAD_NANDF_D9__GPIO3_31		IOMUX_PAD(0x554, 0x16c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D9__NANDF_D9		IOMUX_PAD(0x554, 0x16c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D9__PATA_DATA9		IOMUX_PAD(0x554, 0x16c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D9__SD3_DATA1		IOMUX_PAD(0x554, 0x16c, 5, 0x0940, 1, 0)
+#define _MX51_PAD_NANDF_D8__FEC_TDATA0		IOMUX_PAD(0x558, 0x170, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D8__GPIO4_0		IOMUX_PAD(0x558, 0x170, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D8__NANDF_D8		IOMUX_PAD(0x558, 0x170, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D8__PATA_DATA8		IOMUX_PAD(0x558, 0x170, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D8__SD3_DATA0		IOMUX_PAD(0x558, 0x170, 5, 0x093c, 1, 0)
+#define _MX51_PAD_NANDF_D7__GPIO4_1		IOMUX_PAD(0x55c, 0x174, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D7__NANDF_D7		IOMUX_PAD(0x55c, 0x174, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D7__PATA_DATA7		IOMUX_PAD(0x55c, 0x174, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D7__USBH3_DATA0		IOMUX_PAD(0x55c, 0x174, 5, 0x09fc, 0, 0)
+#define _MX51_PAD_NANDF_D6__GPIO4_2		IOMUX_PAD(0x560, 0x178, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D6__NANDF_D6		IOMUX_PAD(0x560, 0x178, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D6__PATA_DATA6		IOMUX_PAD(0x560, 0x178, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D6__SD4_LCTL		IOMUX_PAD(0x560, 0x178, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D6__USBH3_DATA1		IOMUX_PAD(0x560, 0x178, 5, 0x0a00, 0, 0)
+#define _MX51_PAD_NANDF_D5__GPIO4_3		IOMUX_PAD(0x564, 0x17c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D5__NANDF_D5		IOMUX_PAD(0x564, 0x17c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D5__PATA_DATA5		IOMUX_PAD(0x564, 0x17c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D5__SD4_WP		IOMUX_PAD(0x564, 0x17c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D5__USBH3_DATA2		IOMUX_PAD(0x564, 0x17c, 5, 0x0a04, 0, 0)
+#define _MX51_PAD_NANDF_D4__GPIO4_4		IOMUX_PAD(0x568, 0x180, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D4__NANDF_D4		IOMUX_PAD(0x568, 0x180, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D4__PATA_DATA4		IOMUX_PAD(0x568, 0x180, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D4__SD4_CD		IOMUX_PAD(0x568, 0x180, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D4__USBH3_DATA3		IOMUX_PAD(0x568, 0x180, 5, 0x0a08, 0, 0)
+#define _MX51_PAD_NANDF_D3__GPIO4_5		IOMUX_PAD(0x56c, 0x184, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D3__NANDF_D3		IOMUX_PAD(0x56c, 0x184, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D3__PATA_DATA3		IOMUX_PAD(0x56c, 0x184, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D3__SD4_DAT4		IOMUX_PAD(0x56c, 0x184, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D3__USBH3_DATA4		IOMUX_PAD(0x56c, 0x184, 5, 0x0a0c, 0, 0)
+#define _MX51_PAD_NANDF_D2__GPIO4_6		IOMUX_PAD(0x570, 0x188, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D2__NANDF_D2		IOMUX_PAD(0x570, 0x188, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D2__PATA_DATA2		IOMUX_PAD(0x570, 0x188, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D2__SD4_DAT5		IOMUX_PAD(0x570, 0x188, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D2__USBH3_DATA5		IOMUX_PAD(0x570, 0x188, 5, 0x0a10, 0, 0)
+#define _MX51_PAD_NANDF_D1__GPIO4_7		IOMUX_PAD(0x574, 0x18c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D1__NANDF_D1		IOMUX_PAD(0x574, 0x18c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D1__PATA_DATA1		IOMUX_PAD(0x574, 0x18c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D1__SD4_DAT6		IOMUX_PAD(0x574, 0x18c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D1__USBH3_DATA6		IOMUX_PAD(0x574, 0x18c, 5, 0x0a14, 0, 0)
+#define _MX51_PAD_NANDF_D0__GPIO4_8		IOMUX_PAD(0x578, 0x190, 3, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D0__NANDF_D0		IOMUX_PAD(0x578, 0x190, 0, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D0__PATA_DATA0		IOMUX_PAD(0x578, 0x190, 1, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D0__SD4_DAT7		IOMUX_PAD(0x578, 0x190, 2, 0x0000, 0, 0)
+#define _MX51_PAD_NANDF_D0__USBH3_DATA7		IOMUX_PAD(0x578, 0x190, 5, 0x0a18, 0, 0)
+#define _MX51_PAD_CSI1_D8__CSI1_D8		IOMUX_PAD(0x57c, 0x194, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D8__GPIO3_12		IOMUX_PAD(0x57c, 0x194, 3, 0x0998, 1, 0)
+#define _MX51_PAD_CSI1_D9__CSI1_D9		IOMUX_PAD(0x580, 0x198, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D9__GPIO3_13		IOMUX_PAD(0x580, 0x198, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D10__CSI1_D10		IOMUX_PAD(0x584, 0x19c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D11__CSI1_D11		IOMUX_PAD(0x588, 0x1a0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D12__CSI1_D12		IOMUX_PAD(0x58c, 0x1a4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D13__CSI1_D13		IOMUX_PAD(0x590, 0x1a8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D14__CSI1_D14		IOMUX_PAD(0x594, 0x1ac, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D15__CSI1_D15		IOMUX_PAD(0x598, 0x1b0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D16__CSI1_D16		IOMUX_PAD(0x59c, 0x1b4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D17__CSI1_D17		IOMUX_PAD(0x5a0, 0x1b8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D18__CSI1_D18		IOMUX_PAD(0x5a4, 0x1bc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_D19__CSI1_D19		IOMUX_PAD(0x5a8, 0x1c0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_VSYNC__CSI1_VSYNC	IOMUX_PAD(0x5ac, 0x1c4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_VSYNC__GPIO3_14		IOMUX_PAD(0x5ac, 0x1c4, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_HSYNC__CSI1_HSYNC	IOMUX_PAD(0x5b0, 0x1c8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_HSYNC__GPIO3_15		IOMUX_PAD(0x5b0, 0x1c8, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK	IOMUX_PAD(0x5b4, 0x000, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI1_MCLK__CSI1_MCLK		IOMUX_PAD(0x5b8, 0x000, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D12__CSI2_D12		IOMUX_PAD(0x5bc, 0x1cc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D12__GPIO4_9		IOMUX_PAD(0x5bc, 0x1cc, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D13__CSI2_D13		IOMUX_PAD(0x5c0, 0x1d0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D13__GPIO4_10		IOMUX_PAD(0x5c0, 0x1d0, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D14__CSI2_D14		IOMUX_PAD(0x5c4, 0x1d4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D15__CSI2_D15		IOMUX_PAD(0x5c8, 0x1d8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D16__CSI2_D16		IOMUX_PAD(0x5cc, 0x1dc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D17__CSI2_D17		IOMUX_PAD(0x5d0, 0x1e0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D18__CSI2_D18		IOMUX_PAD(0x5d4, 0x1e4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D18__GPIO4_11		IOMUX_PAD(0x5d4, 0x1e4, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D19__CSI2_D19		IOMUX_PAD(0x5d8, 0x1e8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_D19__GPIO4_12		IOMUX_PAD(0x5d8, 0x1e8, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_VSYNC__CSI2_VSYNC	IOMUX_PAD(0x5dc, 0x1ec, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_VSYNC__GPIO4_13		IOMUX_PAD(0x5dc, 0x1ec, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_HSYNC__CSI2_HSYNC	IOMUX_PAD(0x5e0, 0x1f0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_HSYNC__GPIO4_14		IOMUX_PAD(0x5e0, 0x1f0, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK	IOMUX_PAD(0x5e4, 0x1f4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSI2_PIXCLK__GPIO4_15		IOMUX_PAD(0x5e4, 0x1f4, 3, 0x0000, 0, 0)
+#define _MX51_PAD_I2C1_CLK__GPIO4_16		IOMUX_PAD(0x5e8, 0x1f8, 3, 0x0000, 0, 0)
+#define _MX51_PAD_I2C1_CLK__I2C1_CLK		IOMUX_PAD(0x5e8, 0x1f8, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_I2C1_DAT__GPIO4_17		IOMUX_PAD(0x5ec, 0x1fc, 3, 0x0000, 0, 0)
+#define _MX51_PAD_I2C1_DAT__I2C1_DAT		IOMUX_PAD(0x5ec, 0x1fc, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_TXD__AUD3_TXD		IOMUX_PAD(0x5f0, 0x200, 0, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_TXD__GPIO4_18		IOMUX_PAD(0x5f0, 0x200, 3, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_RXD__AUD3_RXD		IOMUX_PAD(0x5f4, 0x204, 0, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_RXD__GPIO4_19		IOMUX_PAD(0x5f4, 0x204, 3, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_RXD__UART3_RXD	IOMUX_PAD(0x5f4, 0x204, 1, 0x09f4, 2, 0)
+#define _MX51_PAD_AUD3_BB_CK__AUD3_TXC		IOMUX_PAD(0x5f8, 0x208, 0, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_CK__GPIO4_20		IOMUX_PAD(0x5f8, 0x208, 3, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_FS__AUD3_TXFS		IOMUX_PAD(0x5fc, 0x20c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_FS__GPIO4_21		IOMUX_PAD(0x5fc, 0x20c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_AUD3_BB_FS__UART3_TXD		IOMUX_PAD(0x5fc, 0x20c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	IOMUX_PAD(0x600, 0x210, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_MOSI__GPIO4_22		IOMUX_PAD(0x600, 0x210, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_MOSI__I2C1_SDA		IOMUX_PAD(0x600, 0x210, 0x11, 0x09b4, 1, 0)
+#define _MX51_PAD_CSPI1_MISO__AUD4_RXD		IOMUX_PAD(0x604, 0x214, 1, 0x08c4, 1, 0)
+#define _MX51_PAD_CSPI1_MISO__ECSPI1_MISO	IOMUX_PAD(0x604, 0x214, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_MISO__GPIO4_23		IOMUX_PAD(0x604, 0x214, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SS0__AUD4_TXC		IOMUX_PAD(0x608, 0x218, 1, 0x08cc, 1, 0)
+#define _MX51_PAD_CSPI1_SS0__ECSPI1_SS0		IOMUX_PAD(0x608, 0x218, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SS0__GPIO4_24		IOMUX_PAD(0x608, 0x218, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SS1__AUD4_TXD		IOMUX_PAD(0x60c, 0x21c, 1, 0x08c8, 1, 0)
+#define _MX51_PAD_CSPI1_SS1__ECSPI1_SS1		IOMUX_PAD(0x60c, 0x21c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SS1__GPIO4_25		IOMUX_PAD(0x60c, 0x21c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_RDY__AUD4_TXFS		IOMUX_PAD(0x610, 0x220, 1, 0x08d0, 1, 0)
+#define _MX51_PAD_CSPI1_RDY__ECSPI1_RDY		IOMUX_PAD(0x610, 0x220, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_RDY__GPIO4_26		IOMUX_PAD(0x610, 0x220, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	IOMUX_PAD(0x614, 0x224, 0, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SCLK__GPIO4_27		IOMUX_PAD(0x614, 0x224, 3, 0x0000, 0, 0)
+#define _MX51_PAD_CSPI1_SCLK__I2C1_SCL		IOMUX_PAD(0x614, 0x224, 0x11, 0x09b0, 1, 0)
+#define _MX51_PAD_UART1_RXD__GPIO4_28		IOMUX_PAD(0x618, 0x228, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_RXD__UART1_RXD		IOMUX_PAD(0x618, 0x228, 0, 0x09e4, 0, 0)
+#define _MX51_PAD_UART1_TXD__GPIO4_29		IOMUX_PAD(0x61c, 0x22c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_TXD__PWM2_PWMO		IOMUX_PAD(0x61c, 0x22c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_TXD__UART1_TXD		IOMUX_PAD(0x61c, 0x22c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_RTS__GPIO4_30		IOMUX_PAD(0x620, 0x230, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_RTS__UART1_RTS		IOMUX_PAD(0x620, 0x230, 0, 0x09e0, 0, 0)
+#define _MX51_PAD_UART1_CTS__GPIO4_31		IOMUX_PAD(0x624, 0x234, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART1_CTS__UART1_CTS		IOMUX_PAD(0x624, 0x234, 0, 0x0000, 0, 0)
+#define _MX51_PAD_UART2_RXD__FIRI_TXD		IOMUX_PAD(0x628, 0x238, 1, 0x0000, 0, 0)
+#define _MX51_PAD_UART2_RXD__GPIO1_20		IOMUX_PAD(0x628, 0x238, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART2_RXD__UART2_RXD		IOMUX_PAD(0x628, 0x238, 0, 0x09ec, 2, 0)
+#define _MX51_PAD_UART2_TXD__FIRI_RXD		IOMUX_PAD(0x62c, 0x23c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_UART2_TXD__GPIO1_21		IOMUX_PAD(0x62c, 0x23c, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART2_TXD__UART2_TXD		IOMUX_PAD(0x62c, 0x23c, 0, 0x09ec, 3, 0)
+#define _MX51_PAD_UART3_RXD__CSI1_D0		IOMUX_PAD(0x630, 0x240, 2, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_RXD__GPIO1_22		IOMUX_PAD(0x630, 0x240, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_RXD__UART1_DTR		IOMUX_PAD(0x630, 0x240, 0, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_RXD__UART3_RXD		IOMUX_PAD(0x630, 0x240, 1, 0x09f4, 4, 0)
+#define _MX51_PAD_UART3_TXD__CSI1_D1		IOMUX_PAD(0x634, 0x244, 2, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_TXD__GPIO1_23		IOMUX_PAD(0x634, 0x244, 3, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_TXD__UART1_DSR		IOMUX_PAD(0x634, 0x244, 0, 0x0000, 0, 0)
+#define _MX51_PAD_UART3_TXD__UART3_TXD		IOMUX_PAD(0x634, 0x244, 1, 0x0000, 0, 0)
+#define _MX51_PAD_OWIRE_LINE__GPIO1_24		IOMUX_PAD(0x638, 0x248, 3, 0x0000, 0, 0)
+#define _MX51_PAD_OWIRE_LINE__OWIRE_LINE	IOMUX_PAD(0x638, 0x248, 0, 0x0000, 0, 0)
+#define _MX51_PAD_OWIRE_LINE__SPDIF_OUT		IOMUX_PAD(0x638, 0x248, 6, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_ROW0__KEY_ROW0		IOMUX_PAD(0x63c, 0x24c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_ROW1__KEY_ROW1		IOMUX_PAD(0x640, 0x250, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_ROW2__KEY_ROW2		IOMUX_PAD(0x644, 0x254, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_ROW3__KEY_ROW3		IOMUX_PAD(0x648, 0x258, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL0__KEY_COL0		IOMUX_PAD(0x64c, 0x25c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL0__PLL1_BYP		IOMUX_PAD(0x64c, 0x25c, 7, 0x090c, 0, 0)
+#define _MX51_PAD_KEY_COL1__KEY_COL1		IOMUX_PAD(0x650, 0x260, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL1__PLL2_BYP		IOMUX_PAD(0x650, 0x260, 7, 0x0910, 0, 0)
+#define _MX51_PAD_KEY_COL2__KEY_COL2		IOMUX_PAD(0x654, 0x264, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL2__PLL3_BYP		IOMUX_PAD(0x654, 0x264, 7, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL3__KEY_COL3		IOMUX_PAD(0x658, 0x268, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL4__I2C2_SCL		IOMUX_PAD(0x65c, 0x26c, 0x13, 0x09b8, 1, 0)
+#define _MX51_PAD_KEY_COL4__KEY_COL4		IOMUX_PAD(0x65c, 0x26c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL4__SPDIF_OUT1		IOMUX_PAD(0x65c, 0x26c, 6, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL4__UART1_RI		IOMUX_PAD(0x65c, 0x26c, 1, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL4__UART3_RTS		IOMUX_PAD(0x65c, 0x26c, 2, 0x09f0, 4, 0)
+#define _MX51_PAD_KEY_COL5__I2C2_SDA		IOMUX_PAD(0x660, 0x270, 0x13, 0x09bc, 1, 0)
+#define _MX51_PAD_KEY_COL5__KEY_COL5		IOMUX_PAD(0x660, 0x270, 0, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL5__UART1_DCD		IOMUX_PAD(0x660, 0x270, 1, 0x0000, 0, 0)
+#define _MX51_PAD_KEY_COL5__UART3_CTS		IOMUX_PAD(0x660, 0x270, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_CLK__CSPI_SCLK		IOMUX_PAD(0x678, 0x278, 1, 0x0914, 1, 0)
+#define _MX51_PAD_USBH1_CLK__GPIO1_25		IOMUX_PAD(0x678, 0x278, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_CLK__I2C2_SCL		IOMUX_PAD(0x678, 0x278, 0x15, 0x09b8, 2, 0)
+#define _MX51_PAD_USBH1_CLK__USBH1_CLK		IOMUX_PAD(0x678, 0x278, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DIR__CSPI_MOSI		IOMUX_PAD(0x67c, 0x27c, 1, 0x091c, 1, 0)
+#define _MX51_PAD_USBH1_DIR__GPIO1_26		IOMUX_PAD(0x67c, 0x27c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DIR__I2C2_SDA		IOMUX_PAD(0x67c, 0x27c, 0x15, 0x09bc, 2, 0)
+#define _MX51_PAD_USBH1_DIR__USBH1_DIR		IOMUX_PAD(0x67c, 0x27c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_STP__CSPI_RDY		IOMUX_PAD(0x680, 0x280, 1, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_STP__GPIO1_27		IOMUX_PAD(0x680, 0x280, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_STP__UART3_RXD		IOMUX_PAD(0x680, 0x280, 5, 0x09f4, 6, 0)
+#define _MX51_PAD_USBH1_STP__USBH1_STP		IOMUX_PAD(0x680, 0x280, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_NXT__CSPI_MISO		IOMUX_PAD(0x684, 0x284, 1, 0x0918, 0, 0)
+#define _MX51_PAD_USBH1_NXT__GPIO1_28		IOMUX_PAD(0x684, 0x284, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_NXT__UART3_TXD		IOMUX_PAD(0x684, 0x284, 5, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_NXT__USBH1_NXT		IOMUX_PAD(0x684, 0x284, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA0__GPIO1_11		IOMUX_PAD(0x688, 0x288, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA0__UART2_CTS	IOMUX_PAD(0x688, 0x288, 1, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA0__USBH1_DATA0	IOMUX_PAD(0x688, 0x288, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA1__GPIO1_12		IOMUX_PAD(0x68c, 0x28c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA1__UART2_RXD	IOMUX_PAD(0x68c, 0x28c, 1, 0x09ec, 4, 0)
+#define _MX51_PAD_USBH1_DATA1__USBH1_DATA1	IOMUX_PAD(0x68c, 0x28c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA2__GPIO1_13		IOMUX_PAD(0x690, 0x290, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA2__UART2_TXD	IOMUX_PAD(0x690, 0x290, 1, 0x09ec, 5, 0)
+#define _MX51_PAD_USBH1_DATA2__USBH1_DATA2	IOMUX_PAD(0x690, 0x290, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA3__GPIO1_14		IOMUX_PAD(0x694, 0x294, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA3__UART2_RTS	IOMUX_PAD(0x694, 0x294, 1, 0x09e8, 5, 0)
+#define _MX51_PAD_USBH1_DATA3__USBH1_DATA3	IOMUX_PAD(0x694, 0x294, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA4__CSPI_SS0		IOMUX_PAD(0x698, 0x298, 1, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA4__GPIO1_15		IOMUX_PAD(0x698, 0x298, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA4__USBH1_DATA4	IOMUX_PAD(0x698, 0x298, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA5__CSPI_SS1		IOMUX_PAD(0x69c, 0x29c, 1, 0x0920, 0, 0)
+#define _MX51_PAD_USBH1_DATA5__GPIO1_16		IOMUX_PAD(0x69c, 0x29c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA5__USBH1_DATA5	IOMUX_PAD(0x69c, 0x29c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA6__CSPI_SS3		IOMUX_PAD(0x6a0, 0x2a0, 1, 0x0928, 1, 0)
+#define _MX51_PAD_USBH1_DATA6__GPIO1_17		IOMUX_PAD(0x6a0, 0x2a0, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA6__USBH1_DATA6	IOMUX_PAD(0x6a0, 0x2a0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA7__ECSPI1_SS3	IOMUX_PAD(0x6a4, 0x2a4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA7__ECSPI2_SS3	IOMUX_PAD(0x6a4, 0x2a4, 5, 0x0934, 1, 0)
+#define _MX51_PAD_USBH1_DATA7__GPIO1_18		IOMUX_PAD(0x6a4, 0x2a4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_USBH1_DATA7__USBH1_DATA7	IOMUX_PAD(0x6a4, 0x2a4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN11__DI1_PIN11		IOMUX_PAD(0x6a8, 0x2a8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN11__ECSPI1_SS2		IOMUX_PAD(0x6a8, 0x2a8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN11__GPIO3_0		IOMUX_PAD(0x6a8, 0x2a8, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN12__DI1_PIN12		IOMUX_PAD(0x6ac, 0x2ac, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN12__GPIO3_1		IOMUX_PAD(0x6ac, 0x2ac, 4, 0x0978, 1, 0)
+#define _MX51_PAD_DI1_PIN13__DI1_PIN13		IOMUX_PAD(0x6b0, 0x2b0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN13__GPIO3_2		IOMUX_PAD(0x6b0, 0x2b0, 4, 0x097c, 1, 0)
+#define _MX51_PAD_DI1_D0_CS__DI1_D0_CS		IOMUX_PAD(0x6b4, 0x2b4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_D0_CS__GPIO3_3		IOMUX_PAD(0x6b4, 0x2b4, 4, 0x0980, 1, 0)
+#define _MX51_PAD_DI1_D1_CS__DI1_D1_CS		IOMUX_PAD(0x6b8, 0x2b8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_D1_CS__DISP1_PIN14	IOMUX_PAD(0x6b8, 0x2b8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_D1_CS__DISP1_PIN5		IOMUX_PAD(0x6b8, 0x2b8, 3, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_D1_CS__GPIO3_4		IOMUX_PAD(0x6b8, 0x2b8, 4, 0x0984, 1, 0)
+#define _MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1	IOMUX_PAD(0x6bc, 0x2bc, 2, 0x09a4, 1, 0)
+#define _MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN	IOMUX_PAD(0x6bc, 0x2bc, 0, 0x09c4, 0, 0)
+#define _MX51_PAD_DISPB2_SER_DIN__GPIO3_5	IOMUX_PAD(0x6bc, 0x2bc, 4, 0x0988, 1, 0)
+#define _MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6	IOMUX_PAD(0x6c0, 0x2c0, 3, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO	IOMUX_PAD(0x6c0, 0x2c0, 0, 0x09c4, 1, 0)
+#define _MX51_PAD_DISPB2_SER_DIO__GPIO3_6	IOMUX_PAD(0x6c0, 0x2c0, 4, 0x098c, 1, 0)
+#define _MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17	IOMUX_PAD(0x6c4, 0x2c4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7	IOMUX_PAD(0x6c4, 0x2c4, 3, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK	IOMUX_PAD(0x6c4, 0x2c4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_CLK__GPIO3_7	IOMUX_PAD(0x6c4, 0x2c4, 4, 0x0990, 1, 0)
+#define _MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK	IOMUX_PAD(0x6c8, 0x2c8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_RS__DISP1_PIN16	IOMUX_PAD(0x6c8, 0x2c8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_RS__DISP1_PIN8	IOMUX_PAD(0x6c8, 0x2c8, 3, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS	IOMUX_PAD(0x6c8, 0x2c8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS	IOMUX_PAD(0x6c8, 0x2c8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISPB2_SER_RS__GPIO3_8	IOMUX_PAD(0x6c8, 0x2c8, 4, 0x0994, 1, 0)
+#define _MX51_PAD_DISP1_DAT0__DISP1_DAT0	IOMUX_PAD(0x6cc, 0x2cc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT1__DISP1_DAT1	IOMUX_PAD(0x6d0, 0x2d0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT2__DISP1_DAT2	IOMUX_PAD(0x6d4, 0x2d4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT3__DISP1_DAT3	IOMUX_PAD(0x6d8, 0x2d8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT4__DISP1_DAT4	IOMUX_PAD(0x6dc, 0x2dc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT5__DISP1_DAT5	IOMUX_PAD(0x6e0, 0x2e0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT6__BOOT_USB_SRC	IOMUX_PAD(0x6e4, 0x2e4, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT6__DISP1_DAT6	IOMUX_PAD(0x6e4, 0x2e4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG	IOMUX_PAD(0x6e8, 0x2e8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT7__DISP1_DAT7	IOMUX_PAD(0x6e8, 0x2e8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT8__BOOT_SRC0		IOMUX_PAD(0x6ec, 0x2ec, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT8__DISP1_DAT8	IOMUX_PAD(0x6ec, 0x2ec, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT9__BOOT_SRC1		IOMUX_PAD(0x6f0, 0x2f0, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT9__DISP1_DAT9	IOMUX_PAD(0x6f0, 0x2f0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE	IOMUX_PAD(0x6f4, 0x2f4, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT10__DISP1_DAT10	IOMUX_PAD(0x6f4, 0x2f4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2	IOMUX_PAD(0x6f8, 0x2f8, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT11__DISP1_DAT11	IOMUX_PAD(0x6f8, 0x2f8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL	IOMUX_PAD(0x6fc, 0x2fc, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT12__DISP1_DAT12	IOMUX_PAD(0x6fc, 0x2fc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0	IOMUX_PAD(0x700, 0x300, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT13__DISP1_DAT13	IOMUX_PAD(0x700, 0x300, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1	IOMUX_PAD(0x704, 0x304, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT14__DISP1_DAT14	IOMUX_PAD(0x704, 0x304, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH	IOMUX_PAD(0x708, 0x308, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT15__DISP1_DAT15	IOMUX_PAD(0x708, 0x308, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0	IOMUX_PAD(0x70c, 0x30c, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT16__DISP1_DAT16	IOMUX_PAD(0x70c, 0x30c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1	IOMUX_PAD(0x710, 0x310, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT17__DISP1_DAT17	IOMUX_PAD(0x710, 0x310, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0	IOMUX_PAD(0x714, 0x314, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT18__DISP1_DAT18	IOMUX_PAD(0x714, 0x314, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT18__DISP2_PIN11	IOMUX_PAD(0x714, 0x314, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT18__DISP2_PIN5	IOMUX_PAD(0x714, 0x314, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1	IOMUX_PAD(0x718, 0x318, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT19__DISP1_DAT19	IOMUX_PAD(0x718, 0x318, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT19__DISP2_PIN12	IOMUX_PAD(0x718, 0x318, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT19__DISP2_PIN6	IOMUX_PAD(0x718, 0x318, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0	IOMUX_PAD(0x71c, 0x31c, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT20__DISP1_DAT20	IOMUX_PAD(0x71c, 0x31c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT20__DISP2_PIN13	IOMUX_PAD(0x71c, 0x31c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT20__DISP2_PIN7	IOMUX_PAD(0x71c, 0x31c, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1	IOMUX_PAD(0x720, 0x320, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT21__DISP1_DAT21	IOMUX_PAD(0x720, 0x320, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT21__DISP2_PIN14	IOMUX_PAD(0x720, 0x320, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT21__DISP2_PIN8	IOMUX_PAD(0x720, 0x320, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0	IOMUX_PAD(0x724, 0x324, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT22__DISP1_DAT22	IOMUX_PAD(0x724, 0x324, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT22__DISP2_D0_CS	IOMUX_PAD(0x724, 0x324, 6, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT22__DISP2_DAT16	IOMUX_PAD(0x724, 0x324, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1	IOMUX_PAD(0x728, 0x328, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT23__DISP1_DAT23	IOMUX_PAD(0x728, 0x328, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT23__DISP2_D1_CS	IOMUX_PAD(0x728, 0x328, 6, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT23__DISP2_DAT17	IOMUX_PAD(0x728, 0x328, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP1_DAT23__DISP2_SER_CS	IOMUX_PAD(0x728, 0x328, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN3__DI1_PIN3		IOMUX_PAD(0x72c, 0x32c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI1_PIN2__DI1_PIN2		IOMUX_PAD(0x734, 0x330, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI_GP2__DISP1_SER_CLK		IOMUX_PAD(0x740, 0x338, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI_GP2__DISP2_WAIT		IOMUX_PAD(0x740, 0x338, 2, 0x09a8, 1, 0)
+#define _MX51_PAD_DI_GP3__CSI1_DATA_EN		IOMUX_PAD(0x744, 0x33c, 3, 0x09a0, 1, 0)
+#define _MX51_PAD_DI_GP3__DISP1_SER_DIO		IOMUX_PAD(0x744, 0x33c, 0, 0x09c0, 0, 0)
+#define _MX51_PAD_DI_GP3__FEC_TX_ER		IOMUX_PAD(0x744, 0x33c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_PIN4__CSI2_DATA_EN	IOMUX_PAD(0x748, 0x340, 3, 0x099c, 1, 0)
+#define _MX51_PAD_DI2_PIN4__DI2_PIN4		IOMUX_PAD(0x748, 0x340, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_PIN4__FEC_CRS		IOMUX_PAD(0x748, 0x340, 2, 0x0950, 1, 0)
+#define _MX51_PAD_DI2_PIN2__DI2_PIN2		IOMUX_PAD(0x74c, 0x344, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_PIN2__FEC_MDC		IOMUX_PAD(0x74c, 0x344, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_PIN3__DI2_PIN3		IOMUX_PAD(0x750, 0x348, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_PIN3__FEC_MDIO		IOMUX_PAD(0x750, 0x348, 2, 0x0954, 1, 0)
+#define _MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	IOMUX_PAD(0x754, 0x34c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	IOMUX_PAD(0x754, 0x34c, 2, 0x095c, 1, 0)
+#define _MX51_PAD_DI_GP4__DI2_PIN15		IOMUX_PAD(0x758, 0x350, 4, 0x0000, 0, 0)
+#define _MX51_PAD_DI_GP4__DISP1_SER_DIN		IOMUX_PAD(0x758, 0x350, 0, 0x09c0, 1, 0)
+#define _MX51_PAD_DI_GP4__DISP2_PIN1		IOMUX_PAD(0x758, 0x350, 3, 0x0000, 0, 0)
+#define _MX51_PAD_DI_GP4__FEC_RDATA2		IOMUX_PAD(0x758, 0x350, 2, 0x0960, 1, 0)
+#define _MX51_PAD_DISP2_DAT0__DISP2_DAT0	IOMUX_PAD(0x75c, 0x354, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT0__FEC_RDATA3	IOMUX_PAD(0x75c, 0x354, 2, 0x0964, 1, 0)
+#define _MX51_PAD_DISP2_DAT0__KEY_COL6		IOMUX_PAD(0x75c, 0x354, 4, 0x09c8, 1, 0)
+#define _MX51_PAD_DISP2_DAT0__UART3_RXD		IOMUX_PAD(0x75c, 0x354, 5, 0x09f4, 8, 0)
+#define _MX51_PAD_DISP2_DAT0__USBH3_CLK		IOMUX_PAD(0x75c, 0x354, 3, 0x09f8, 1, 0)
+#define _MX51_PAD_DISP2_DAT1__DISP2_DAT1	IOMUX_PAD(0x760, 0x358, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT1__FEC_RX_ER		IOMUX_PAD(0x760, 0x358, 2, 0x0970, 1, 0)
+#define _MX51_PAD_DISP2_DAT1__KEY_COL7		IOMUX_PAD(0x760, 0x358, 4, 0x09cc, 1, 0)
+#define _MX51_PAD_DISP2_DAT1__UART3_TXD		IOMUX_PAD(0x760, 0x358, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT1__USBH3_DIR		IOMUX_PAD(0x760, 0x358, 3, 0x0a1c, 1, 0)
+#define _MX51_PAD_DISP2_DAT2__DISP2_DAT2	IOMUX_PAD(0x764, 0x35c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT3__DISP2_DAT3	IOMUX_PAD(0x768, 0x360, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT4__DISP2_DAT4	IOMUX_PAD(0x76c, 0x364, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT5__DISP2_DAT5	IOMUX_PAD(0x770, 0x368, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT6__DISP2_DAT6	IOMUX_PAD(0x774, 0x36c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT6__FEC_TDATA1	IOMUX_PAD(0x774, 0x36c, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT6__GPIO1_19		IOMUX_PAD(0x774, 0x36c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT6__KEY_ROW4		IOMUX_PAD(0x774, 0x36c, 4, 0x09d0, 1, 0)
+#define _MX51_PAD_DISP2_DAT6__USBH3_STP		IOMUX_PAD(0x774, 0x36c, 3, 0x0a24, 1, 0)
+#define _MX51_PAD_DISP2_DAT7__DISP2_DAT7	IOMUX_PAD(0x778, 0x370, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT7__FEC_TDATA2	IOMUX_PAD(0x778, 0x370, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT7__GPIO1_29		IOMUX_PAD(0x778, 0x370, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT7__KEY_ROW5		IOMUX_PAD(0x778, 0x370, 4, 0x09d4, 1, 0)
+#define _MX51_PAD_DISP2_DAT7__USBH3_NXT		IOMUX_PAD(0x778, 0x370, 3, 0x0a20, 1, 0)
+#define _MX51_PAD_DISP2_DAT8__DISP2_DAT8	IOMUX_PAD(0x77c, 0x374, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT8__FEC_TDATA3	IOMUX_PAD(0x77c, 0x374, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT8__GPIO1_30		IOMUX_PAD(0x77c, 0x374, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT8__KEY_ROW6		IOMUX_PAD(0x77c, 0x374, 4, 0x09d8, 1, 0)
+#define _MX51_PAD_DISP2_DAT8__USBH3_DATA0	IOMUX_PAD(0x77c, 0x374, 3, 0x09fc, 1, 0)
+#define _MX51_PAD_DISP2_DAT9__AUD6_RXC		IOMUX_PAD(0x780, 0x378, 4, 0x08f4, 1, 0)
+#define _MX51_PAD_DISP2_DAT9__DISP2_DAT9	IOMUX_PAD(0x780, 0x378, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT9__FEC_TX_EN		IOMUX_PAD(0x780, 0x378, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT9__GPIO1_31		IOMUX_PAD(0x780, 0x378, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT9__USBH3_DATA1	IOMUX_PAD(0x780, 0x378, 3, 0x0a00, 1, 0)
+#define _MX51_PAD_DISP2_DAT10__DISP2_DAT10	IOMUX_PAD(0x784, 0x37c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT10__DISP2_SER_CS	IOMUX_PAD(0x784, 0x37c, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT10__FEC_COL		IOMUX_PAD(0x784, 0x37c, 2, 0x094c, 1, 0)
+#define _MX51_PAD_DISP2_DAT10__KEY_ROW7		IOMUX_PAD(0x784, 0x37c, 4, 0x09dc, 1, 0)
+#define _MX51_PAD_DISP2_DAT10__USBH3_DATA2	IOMUX_PAD(0x784, 0x37c, 3, 0x0a04, 1, 0)
+#define _MX51_PAD_DISP2_DAT11__AUD6_TXD		IOMUX_PAD(0x788, 0x380, 4, 0x08f0, 1, 0)
+#define _MX51_PAD_DISP2_DAT11__DISP2_DAT11	IOMUX_PAD(0x788, 0x380, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT11__FEC_RX_CLK	IOMUX_PAD(0x788, 0x380, 2, 0x0968, 1, 0)
+#define _MX51_PAD_DISP2_DAT11__GPIO1_10		IOMUX_PAD(0x788, 0x380, 7, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT11__USBH3_DATA3	IOMUX_PAD(0x788, 0x380, 3, 0x0a08, 1, 0)
+#define _MX51_PAD_DISP2_DAT12__AUD6_RXD		IOMUX_PAD(0x78c, 0x384, 4, 0x08ec, 1, 0)
+#define _MX51_PAD_DISP2_DAT12__DISP2_DAT12	IOMUX_PAD(0x78c, 0x384, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT12__FEC_RX_DV	IOMUX_PAD(0x78c, 0x384, 2, 0x096c, 1, 0)
+#define _MX51_PAD_DISP2_DAT12__USBH3_DATA4	IOMUX_PAD(0x78c, 0x384, 3, 0x0a0c, 1, 0)
+#define _MX51_PAD_DISP2_DAT13__AUD6_TXC		IOMUX_PAD(0x790, 0x388, 4, 0x08fc, 1, 0)
+#define _MX51_PAD_DISP2_DAT13__DISP2_DAT13	IOMUX_PAD(0x790, 0x388, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT13__FEC_TX_CLK	IOMUX_PAD(0x790, 0x388, 2, 0x0974, 1, 0)
+#define _MX51_PAD_DISP2_DAT13__USBH3_DATA5	IOMUX_PAD(0x790, 0x388, 3, 0x0a10, 1, 0)
+#define _MX51_PAD_DISP2_DAT14__AUD6_TXFS	IOMUX_PAD(0x794, 0x38c, 4, 0x0900, 1, 0)
+#define _MX51_PAD_DISP2_DAT14__DISP2_DAT14	IOMUX_PAD(0x794, 0x38c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT14__FEC_RDATA0	IOMUX_PAD(0x794, 0x38c, 2, 0x0958, 1, 0)
+#define _MX51_PAD_DISP2_DAT14__USBH3_DATA6	IOMUX_PAD(0x794, 0x38c, 3, 0x0a14, 1, 0)
+#define _MX51_PAD_DISP2_DAT15__AUD6_RXFS	IOMUX_PAD(0x798, 0x390, 4, 0x08f8, 1, 0)
+#define _MX51_PAD_DISP2_DAT15__DISP1_SER_CS	IOMUX_PAD(0x798, 0x390, 5, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT15__DISP2_DAT15	IOMUX_PAD(0x798, 0x390, 0, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT15__FEC_TDATA0	IOMUX_PAD(0x798, 0x390, 2, 0x0000, 0, 0)
+#define _MX51_PAD_DISP2_DAT15__USBH3_DATA7	IOMUX_PAD(0x798, 0x390, 3, 0x0a18, 1, 0)
+#define _MX51_PAD_SD1_CMD__AUD5_RXFS		IOMUX_PAD(0x79c, 0x394, 1, 0x08e0, 1, 0)
+#define _MX51_PAD_SD1_CMD__CSPI_MOSI		IOMUX_PAD(0x79c, 0x394, 2, 0x091c, 2, 0)
+#define _MX51_PAD_SD1_CMD__SD1_CMD		IOMUX_PAD(0x79c, 0x394, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD1_CLK__AUD5_RXC		IOMUX_PAD(0x7a0, 0x398, 1, 0x08dc, 1, 0)
+#define _MX51_PAD_SD1_CLK__CSPI_SCLK		IOMUX_PAD(0x7a0, 0x398, 2, 0x0914, 2, 0)
+#define _MX51_PAD_SD1_CLK__SD1_CLK		IOMUX_PAD(0x7a0, 0x398, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD1_DATA0__AUD5_TXD		IOMUX_PAD(0x7a4, 0x39c, 1, 0x08d8, 2, 0)
+#define _MX51_PAD_SD1_DATA0__CSPI_MISO		IOMUX_PAD(0x7a4, 0x39c, 2, 0x0918, 1, 0)
+#define _MX51_PAD_SD1_DATA0__SD1_DATA0		IOMUX_PAD(0x7a4, 0x39c, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA0__EIM_DA0		IOMUX_PAD(0x000, 0x01c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA1__EIM_DA1		IOMUX_PAD(0x000, 0x020, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA2__EIM_DA2		IOMUX_PAD(0x000, 0x024, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA3__EIM_DA3		IOMUX_PAD(0x000, 0x028, 0, 0x0000, 0, 0)
+#define _MX51_PAD_SD1_DATA1__AUD5_RXD		IOMUX_PAD(0x7a8, 0x3a0, 1, 0x08d4, 2, 0)
+#define _MX51_PAD_SD1_DATA1__SD1_DATA1		IOMUX_PAD(0x7a8, 0x3a0, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA4__EIM_DA4		IOMUX_PAD(0x000, 0x02c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA5__EIM_DA5		IOMUX_PAD(0x000, 0x030, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA6__EIM_DA6		IOMUX_PAD(0x000, 0x034, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA7__EIM_DA7		IOMUX_PAD(0x000, 0x038, 0, 0x0000, 0, 0)
+#define _MX51_PAD_SD1_DATA2__AUD5_TXC		IOMUX_PAD(0x7ac, 0x3a4, 1, 0x08e4, 2, 0)
+#define _MX51_PAD_SD1_DATA2__SD1_DATA2		IOMUX_PAD(0x7ac, 0x3a4, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA10__EIM_DA10		IOMUX_PAD(0x000, 0x044, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA11__EIM_DA11		IOMUX_PAD(0x000, 0x048, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA8__EIM_DA8		IOMUX_PAD(0x000, 0x03c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA9__EIM_DA9		IOMUX_PAD(0x000, 0x040, 0, 0x0000, 0, 0)
+#define _MX51_PAD_SD1_DATA3__AUD5_TXFS		IOMUX_PAD(0x7b0, 0x3a8, 1, 0x08e8, 2, 0)
+#define _MX51_PAD_SD1_DATA3__CSPI_SS1		IOMUX_PAD(0x7b0, 0x3a8, 2, 0x0920, 1, 0)
+#define _MX51_PAD_SD1_DATA3__SD1_DATA3		IOMUX_PAD(0x7b0, 0x3a8, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_0__CSPI_SS2		IOMUX_PAD(0x7b4, 0x3ac, 2, 0x0924, 0, 0)
+#define _MX51_PAD_GPIO1_0__GPIO1_0		IOMUX_PAD(0x7b4, 0x3ac, 1, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_0__SD1_CD		IOMUX_PAD(0x7b4, 0x3ac, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_1__CSPI_MISO		IOMUX_PAD(0x7b8, 0x3b0, 2, 0x0918, 2, 0)
+#define _MX51_PAD_GPIO1_1__GPIO1_1		IOMUX_PAD(0x7b8, 0x3b0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_1__SD1_WP		IOMUX_PAD(0x7b8, 0x3b0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA12__EIM_DA12		IOMUX_PAD(0x000, 0x04c, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA13__EIM_DA13		IOMUX_PAD(0x000, 0x050, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA14__EIM_DA14		IOMUX_PAD(0x000, 0x054, 0, 0x0000, 0, 0)
+#define _MX51_PAD_EIM_DA15__EIM_DA15		IOMUX_PAD(0x000, 0x058, 0, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_CMD__CSPI_MOSI		IOMUX_PAD(0x000, 0x3b4, 2, 0x091c, 3, 0)
+#define _MX51_PAD_SD2_CMD__I2C1_SCL		IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x09b0, 2, 0)
+#define _MX51_PAD_SD2_CMD__SD2_CMD		IOMUX_PAD(0x7bc, 0x3b4, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_CLK__CSPI_SCLK		IOMUX_PAD(0x7c0, 0x3b8, 2, 0x0914, 3, 0)
+#define _MX51_PAD_SD2_CLK__I2C1_SDA		IOMUX_PAD(0x7c0, 0x3b8, 0x11, 0x09b4, 2, 0)
+#define _MX51_PAD_SD2_CLK__SD2_CLK		IOMUX_PAD(0x7c0, 0x3b8, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA0__CSPI_MISO		IOMUX_PAD(0x7c4, 0x3bc, 2, 0x0918, 3, 0)
+#define _MX51_PAD_SD2_DATA0__SD1_DAT4		IOMUX_PAD(0x7c4, 0x3bc, 1, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA0__SD2_DATA0		IOMUX_PAD(0x7c4, 0x3bc, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA1__SD1_DAT5		IOMUX_PAD(0x7c8, 0x3c0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA1__SD2_DATA1		IOMUX_PAD(0x7c8, 0x3c0, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA1__USBH3_H2_DP	IOMUX_PAD(0x7c8, 0x3c0, 2, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA2__SD1_DAT6		IOMUX_PAD(0x7cc, 0x3c4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA2__SD2_DATA2		IOMUX_PAD(0x7cc, 0x3c4, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA2__USBH3_H2_DM	IOMUX_PAD(0x7cc, 0x3c4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA3__CSPI_SS2		IOMUX_PAD(0x7d0, 0x3c8, 2, 0x0924, 1, 0)
+#define _MX51_PAD_SD2_DATA3__SD1_DAT7		IOMUX_PAD(0x7d0, 0x3c8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_SD2_DATA3__SD2_DATA3		IOMUX_PAD(0x7d0, 0x3c8, 0x10, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_2__CCM_OUT_2		IOMUX_PAD(0x7d4, 0x3cc, 5, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_2__GPIO1_2		IOMUX_PAD(0x7d4, 0x3cc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_2__I2C2_SCL		IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x09b8, 3, 0)
+#define _MX51_PAD_GPIO1_2__PLL1_BYP		IOMUX_PAD(0x7d4, 0x3cc, 7, 0x090c, 1, 0)
+#define _MX51_PAD_GPIO1_2__PWM1_PWMO		IOMUX_PAD(0x7d4, 0x3cc, 1, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_3__GPIO1_3		IOMUX_PAD(0x7d8, 0x3d0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_3__I2C2_SDA		IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x09bc, 3, 0)
+#define _MX51_PAD_GPIO1_3__PLL2_BYP		IOMUX_PAD(0x7d8, 0x3d0, 7, 0x0910, 1, 0)
+#define _MX51_PAD_GPIO1_3__PWM2_PWMO		IOMUX_PAD(0x7d8, 0x3d0, 1, 0x0000, 0, 0)
+#define _MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	IOMUX_PAD(0x7fc, 0x3d4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B	IOMUX_PAD(0x7fc, 0x3d4, 1, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_4__DISP2_EXT_CLK	IOMUX_PAD(0x804, 0x3d8, 4, 0x0908, 1, 0)
+#define _MX51_PAD_GPIO1_4__EIM_RDY		IOMUX_PAD(0x804, 0x3d8, 3, 0x0938, 1, 0)
+#define _MX51_PAD_GPIO1_4__GPIO1_4		IOMUX_PAD(0x804, 0x3d8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_4__WDOG1_WDOG_B		IOMUX_PAD(0x804, 0x3d8, 2, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_5__CSI2_MCLK		IOMUX_PAD(0x808, 0x3dc, 6, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_5__DISP2_PIN16		IOMUX_PAD(0x808, 0x3dc, 3, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_5__GPIO1_5		IOMUX_PAD(0x808, 0x3dc, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_5__WDOG2_WDOG_B		IOMUX_PAD(0x808, 0x3dc, 2, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_6__DISP2_PIN17		IOMUX_PAD(0x80c, 0x3e0, 4, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_6__GPIO1_6		IOMUX_PAD(0x80c, 0x3e0, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_6__REF_EN_B		IOMUX_PAD(0x80c, 0x3e0, 3, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_7__CCM_OUT_0		IOMUX_PAD(0x810, 0x3e4, 3, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_7__GPIO1_7		IOMUX_PAD(0x810, 0x3e4, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_7__SD2_WP		IOMUX_PAD(0x810, 0x3e4, 6, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_7__SPDIF_OUT1		IOMUX_PAD(0x810, 0x3e4, 2, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_8__CSI2_DATA_EN		IOMUX_PAD(0x814, 0x3e8, 2, 0x099c, 2, 0)
+#define _MX51_PAD_GPIO1_8__GPIO1_8		IOMUX_PAD(0x814, 0x3e8, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_8__SD2_CD		IOMUX_PAD(0x814, 0x3e8, 6, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_8__USBH3_PWR		IOMUX_PAD(0x814, 0x3e8, 1, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__CCM_OUT_1		IOMUX_PAD(0x818, 0x3ec, 3, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__DISP2_D1_CS		IOMUX_PAD(0x818, 0x3ec, 2, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__DISP2_SER_CS		IOMUX_PAD(0x818, 0x3ec, 7, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__GPIO1_9		IOMUX_PAD(0x818, 0x3ec, 0, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__SD2_LCTL		IOMUX_PAD(0x818, 0x3ec, 6, 0x0000, 0, 0)
+#define _MX51_PAD_GPIO1_9__USBH3_OC		IOMUX_PAD(0x818, 0x3ec, 1, 0x0000, 0, 0)
+
+/* The same pins as above but with the default pad control values applied */
+#define MX51_PAD_EIM_D16__AUD4_RXFS		(_MX51_PAD_EIM_D16__AUD4_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D16__AUD5_TXD		(_MX51_PAD_EIM_D16__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D16__EIM_D16		(_MX51_PAD_EIM_D16__EIM_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D16__GPIO2_0		(_MX51_PAD_EIM_D16__GPIO2_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D16__I2C1_SDA		(_MX51_PAD_EIM_D16__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_EIM_D16__UART2_CTS		(_MX51_PAD_EIM_D16__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D16__USBH2_DATA0		(_MX51_PAD_EIM_D16__USBH2_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D17__AUD5_RXD		(_MX51_PAD_EIM_D17__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D17__EIM_D17		(_MX51_PAD_EIM_D17__EIM_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D17__GPIO2_1		(_MX51_PAD_EIM_D17__GPIO2_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D17__UART2_RXD		(_MX51_PAD_EIM_D17__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D17__UART3_CTS		(_MX51_PAD_EIM_D17__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D17__USBH2_DATA1		(_MX51_PAD_EIM_D17__USBH2_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D18__AUD5_TXC		(_MX51_PAD_EIM_D18__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D18__EIM_D18		(_MX51_PAD_EIM_D18__EIM_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D18__GPIO2_2		(_MX51_PAD_EIM_D18__GPIO2_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D18__UART2_TXD		(_MX51_PAD_EIM_D18__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D18__UART3_RTS		(_MX51_PAD_EIM_D18__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D18__USBH2_DATA2		(_MX51_PAD_EIM_D18__USBH2_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D19__AUD4_RXC		(_MX51_PAD_EIM_D19__AUD4_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D19__AUD5_TXFS		(_MX51_PAD_EIM_D19__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D19__EIM_D19		(_MX51_PAD_EIM_D19__EIM_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D19__GPIO2_3		(_MX51_PAD_EIM_D19__GPIO2_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D19__I2C1_SCL		(_MX51_PAD_EIM_D19__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_EIM_D19__UART2_RTS		(_MX51_PAD_EIM_D19__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D19__USBH2_DATA3		(_MX51_PAD_EIM_D19__USBH2_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D20__AUD4_TXD		(_MX51_PAD_EIM_D20__AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D20__EIM_D20		(_MX51_PAD_EIM_D20__EIM_D20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D20__GPIO2_4		(_MX51_PAD_EIM_D20__GPIO2_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D20__SRTC_ALARM_DEB	(_MX51_PAD_EIM_D20__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D20__USBH2_DATA4		(_MX51_PAD_EIM_D20__USBH2_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D21__AUD4_RXD		(_MX51_PAD_EIM_D21__AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D21__EIM_D21		(_MX51_PAD_EIM_D21__EIM_D21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D21__GPIO2_5		(_MX51_PAD_EIM_D21__GPIO2_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D21__SRTC_ALARM_DEB	(_MX51_PAD_EIM_D21__SRTC_ALARM_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D21__USBH2_DATA5		(_MX51_PAD_EIM_D21__USBH2_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D22__AUD4_TXC		(_MX51_PAD_EIM_D22__AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D22__EIM_D22		(_MX51_PAD_EIM_D22__EIM_D22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D22__GPIO2_6		(_MX51_PAD_EIM_D22__GPIO2_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D22__USBH2_DATA6		(_MX51_PAD_EIM_D22__USBH2_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D23__AUD4_TXFS		(_MX51_PAD_EIM_D23__AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D23__EIM_D23		(_MX51_PAD_EIM_D23__EIM_D23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D23__GPIO2_7		(_MX51_PAD_EIM_D23__GPIO2_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D23__SPDIF_OUT1		(_MX51_PAD_EIM_D23__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D23__USBH2_DATA7		(_MX51_PAD_EIM_D23__USBH2_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D24__AUD6_RXFS		(_MX51_PAD_EIM_D24__AUD6_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D24__EIM_D24		(_MX51_PAD_EIM_D24__EIM_D24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D24__GPIO2_8		(_MX51_PAD_EIM_D24__GPIO2_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D24__I2C2_SDA		(_MX51_PAD_EIM_D24__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_EIM_D24__UART3_CTS		(_MX51_PAD_EIM_D24__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D24__USBOTG_DATA0		(_MX51_PAD_EIM_D24__USBOTG_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D25__EIM_D25		(_MX51_PAD_EIM_D25__EIM_D25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D25__KEY_COL6		(_MX51_PAD_EIM_D25__KEY_COL6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D25__UART2_CTS		(_MX51_PAD_EIM_D25__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D25__UART3_RXD		(_MX51_PAD_EIM_D25__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D25__USBOTG_DATA1		(_MX51_PAD_EIM_D25__USBOTG_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D26__EIM_D26		(_MX51_PAD_EIM_D26__EIM_D26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D26__KEY_COL7		(_MX51_PAD_EIM_D26__KEY_COL7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D26__UART2_RTS		(_MX51_PAD_EIM_D26__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D26__UART3_TXD		(_MX51_PAD_EIM_D26__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D26__USBOTG_DATA2		(_MX51_PAD_EIM_D26__USBOTG_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D27__AUD6_RXC		(_MX51_PAD_EIM_D27__AUD6_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D27__EIM_D27		(_MX51_PAD_EIM_D27__EIM_D27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D27__GPIO2_9		(_MX51_PAD_EIM_D27__GPIO2_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_D27__I2C2_SCL		(_MX51_PAD_EIM_D27__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_EIM_D27__UART3_RTS		(_MX51_PAD_EIM_D27__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_EIM_D27__USBOTG_DATA3		(_MX51_PAD_EIM_D27__USBOTG_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D28__AUD6_TXD		(_MX51_PAD_EIM_D28__AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D28__EIM_D28		(_MX51_PAD_EIM_D28__EIM_D28 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D28__KEY_ROW4		(_MX51_PAD_EIM_D28__KEY_ROW4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D28__USBOTG_DATA4		(_MX51_PAD_EIM_D28__USBOTG_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D29__AUD6_RXD		(_MX51_PAD_EIM_D29__AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D29__EIM_D29		(_MX51_PAD_EIM_D29__EIM_D29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D29__KEY_ROW5		(_MX51_PAD_EIM_D29__KEY_ROW5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D29__USBOTG_DATA5		(_MX51_PAD_EIM_D29__USBOTG_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D30__AUD6_TXC		(_MX51_PAD_EIM_D30__AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D30__EIM_D30		(_MX51_PAD_EIM_D30__EIM_D30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D30__KEY_ROW6		(_MX51_PAD_EIM_D30__KEY_ROW6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D30__USBOTG_DATA6		(_MX51_PAD_EIM_D30__USBOTG_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D31__AUD6_TXFS		(_MX51_PAD_EIM_D31__AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D31__EIM_D31		(_MX51_PAD_EIM_D31__EIM_D31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D31__KEY_ROW7		(_MX51_PAD_EIM_D31__KEY_ROW7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_D31__USBOTG_DATA7		(_MX51_PAD_EIM_D31__USBOTG_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A16__EIM_A16		(_MX51_PAD_EIM_A16__EIM_A16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A16__GPIO2_10		(_MX51_PAD_EIM_A16__GPIO2_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A16__OSC_FREQ_SEL0		(_MX51_PAD_EIM_A16__OSC_FREQ_SEL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A17__EIM_A17		(_MX51_PAD_EIM_A17__EIM_A17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A17__GPIO2_11		(_MX51_PAD_EIM_A17__GPIO2_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A17__OSC_FREQ_SEL1		(_MX51_PAD_EIM_A17__OSC_FREQ_SEL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A18__BOOT_LPB0		(_MX51_PAD_EIM_A18__BOOT_LPB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A18__EIM_A18		(_MX51_PAD_EIM_A18__EIM_A18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A18__GPIO2_12		(_MX51_PAD_EIM_A18__GPIO2_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A19__BOOT_LPB1		(_MX51_PAD_EIM_A19__BOOT_LPB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A19__EIM_A19		(_MX51_PAD_EIM_A19__EIM_A19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A19__GPIO2_13		(_MX51_PAD_EIM_A19__GPIO2_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A20__BOOT_UART_SRC0	(_MX51_PAD_EIM_A20__BOOT_UART_SRC0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A20__EIM_A20		(_MX51_PAD_EIM_A20__EIM_A20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A20__GPIO2_14		(_MX51_PAD_EIM_A20__GPIO2_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A21__BOOT_UART_SRC1	(_MX51_PAD_EIM_A21__BOOT_UART_SRC1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A21__EIM_A21		(_MX51_PAD_EIM_A21__EIM_A21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A21__GPIO2_15		(_MX51_PAD_EIM_A21__GPIO2_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A22__EIM_A22		(_MX51_PAD_EIM_A22__EIM_A22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A22__GPIO2_16		(_MX51_PAD_EIM_A22__GPIO2_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A23__BOOT_HPN_EN		(_MX51_PAD_EIM_A23__BOOT_HPN_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A23__EIM_A23		(_MX51_PAD_EIM_A23__EIM_A23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A23__GPIO2_17		(_MX51_PAD_EIM_A23__GPIO2_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A24__EIM_A24		(_MX51_PAD_EIM_A24__EIM_A24 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A24__GPIO2_18		(_MX51_PAD_EIM_A24__GPIO2_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A24__USBH2_CLK		(_MX51_PAD_EIM_A24__USBH2_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A25__DISP1_PIN4		(_MX51_PAD_EIM_A25__DISP1_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A25__EIM_A25		(_MX51_PAD_EIM_A25__EIM_A25 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A25__GPIO2_19		(_MX51_PAD_EIM_A25__GPIO2_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A25__USBH2_DIR		(_MX51_PAD_EIM_A25__USBH2_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A26__CSI1_DATA_EN		(_MX51_PAD_EIM_A26__CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A26__DISP2_EXT_CLK		(_MX51_PAD_EIM_A26__DISP2_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A26__EIM_A26		(_MX51_PAD_EIM_A26__EIM_A26 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A26__GPIO2_20		(_MX51_PAD_EIM_A26__GPIO2_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A26__USBH2_STP		(_MX51_PAD_EIM_A26__USBH2_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A27__CSI2_DATA_EN		(_MX51_PAD_EIM_A27__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A27__DISP1_PIN1		(_MX51_PAD_EIM_A27__DISP1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A27__EIM_A27		(_MX51_PAD_EIM_A27__EIM_A27 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_A27__GPIO2_21		(_MX51_PAD_EIM_A27__GPIO2_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_A27__USBH2_NXT		(_MX51_PAD_EIM_A27__USBH2_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB0__EIM_EB0		(_MX51_PAD_EIM_EB0__EIM_EB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB1__EIM_EB1		(_MX51_PAD_EIM_EB1__EIM_EB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__AUD5_RXFS		(_MX51_PAD_EIM_EB2__AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__CSI1_D2		(_MX51_PAD_EIM_EB2__CSI1_D2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__EIM_EB2		(_MX51_PAD_EIM_EB2__EIM_EB2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__FEC_MDIO		(_MX51_PAD_EIM_EB2__FEC_MDIO | \
+		MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP | PAD_CTL_PKE | PAD_CTL_SRE_FAST | \
+		PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS))
+#define MX51_PAD_EIM_EB2__GPIO2_22		(_MX51_PAD_EIM_EB2__GPIO2_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_EB2__GPT_CMPOUT1		(_MX51_PAD_EIM_EB2__GPT_CMPOUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__AUD5_RXC		(_MX51_PAD_EIM_EB3__AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__CSI1_D3		(_MX51_PAD_EIM_EB3__CSI1_D3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__EIM_EB3		(_MX51_PAD_EIM_EB3__EIM_EB3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__FEC_RDATA1		(_MX51_PAD_EIM_EB3__FEC_RDATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__GPIO2_23		(_MX51_PAD_EIM_EB3__GPIO2_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_EB3__GPT_CMPOUT2		(_MX51_PAD_EIM_EB3__GPT_CMPOUT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_OE__EIM_OE			(_MX51_PAD_EIM_OE__EIM_OE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_OE__GPIO2_24		(_MX51_PAD_EIM_OE__GPIO2_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS0__EIM_CS0		(_MX51_PAD_EIM_CS0__EIM_CS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS0__GPIO2_25		(_MX51_PAD_EIM_CS0__GPIO2_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS1__EIM_CS1		(_MX51_PAD_EIM_CS1__EIM_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS1__GPIO2_26		(_MX51_PAD_EIM_CS1__GPIO2_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__AUD5_TXD		(_MX51_PAD_EIM_CS2__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__CSI1_D4		(_MX51_PAD_EIM_CS2__CSI1_D4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__EIM_CS2		(_MX51_PAD_EIM_CS2__EIM_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__FEC_RDATA2		(_MX51_PAD_EIM_CS2__FEC_RDATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__GPIO2_27		(_MX51_PAD_EIM_CS2__GPIO2_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS2__USBOTG_STP		(_MX51_PAD_EIM_CS2__USBOTG_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__AUD5_RXD		(_MX51_PAD_EIM_CS3__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__CSI1_D5		(_MX51_PAD_EIM_CS3__CSI1_D5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__EIM_CS3		(_MX51_PAD_EIM_CS3__EIM_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__FEC_RDATA3		(_MX51_PAD_EIM_CS3__FEC_RDATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__GPIO2_28		(_MX51_PAD_EIM_CS3__GPIO2_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS3__USBOTG_NXT		(_MX51_PAD_EIM_CS3__USBOTG_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS4__AUD5_TXC		(_MX51_PAD_EIM_CS4__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS4__CSI1_D6		(_MX51_PAD_EIM_CS4__CSI1_D6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS4__EIM_CS4		(_MX51_PAD_EIM_CS4__EIM_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS4__FEC_RX_ER		(_MX51_PAD_EIM_CS4__FEC_RX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
+#define MX51_PAD_EIM_CS4__GPIO2_29		(_MX51_PAD_EIM_CS4__GPIO2_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS4__USBOTG_CLK		(_MX51_PAD_EIM_CS4__USBOTG_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__AUD5_TXFS		(_MX51_PAD_EIM_CS5__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__CSI1_D7		(_MX51_PAD_EIM_CS5__CSI1_D7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__DISP1_EXT_CLK		(_MX51_PAD_EIM_CS5__DISP1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__EIM_CS5		(_MX51_PAD_EIM_CS5__EIM_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__FEC_CRS		(_MX51_PAD_EIM_CS5__FEC_CRS | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
+#define MX51_PAD_EIM_CS5__GPIO2_30		(_MX51_PAD_EIM_CS5__GPIO2_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CS5__USBOTG_DIR		(_MX51_PAD_EIM_CS5__USBOTG_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DTACK__EIM_DTACK		(_MX51_PAD_EIM_DTACK__EIM_DTACK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DTACK__GPIO2_31		(_MX51_PAD_EIM_DTACK__GPIO2_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_LBA__EIM_LBA		(_MX51_PAD_EIM_LBA__EIM_LBA | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_LBA__GPIO3_1		(_MX51_PAD_EIM_LBA__GPIO3_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_EIM_CRE__EIM_CRE		(_MX51_PAD_EIM_CRE__EIM_CRE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_CRE__GPIO3_2		(_MX51_PAD_EIM_CRE__GPIO3_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DRAM_CS1__DRAM_CS1		(_MX51_PAD_DRAM_CS1__DRAM_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WE_B__GPIO3_3		(_MX51_PAD_NANDF_WE_B__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_WE_B__NANDF_WE_B		(_MX51_PAD_NANDF_WE_B__NANDF_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WE_B__PATA_DIOW		(_MX51_PAD_NANDF_WE_B__PATA_DIOW | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WE_B__SD3_DATA0		(_MX51_PAD_NANDF_WE_B__SD3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RE_B__GPIO3_4		(_MX51_PAD_NANDF_RE_B__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RE_B__NANDF_RE_B		(_MX51_PAD_NANDF_RE_B__NANDF_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RE_B__PATA_DIOR		(_MX51_PAD_NANDF_RE_B__PATA_DIOR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RE_B__SD3_DATA1		(_MX51_PAD_NANDF_RE_B__SD3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_ALE__GPIO3_5		(_MX51_PAD_NANDF_ALE__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_ALE__NANDF_ALE		(_MX51_PAD_NANDF_ALE__NANDF_ALE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_ALE__PATA_BUFFER_EN	(_MX51_PAD_NANDF_ALE__PATA_BUFFER_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CLE__GPIO3_6		(_MX51_PAD_NANDF_CLE__GPIO3_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CLE__NANDF_CLE		(_MX51_PAD_NANDF_CLE__NANDF_CLE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CLE__PATA_RESET_B	(_MX51_PAD_NANDF_CLE__PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WP_B__GPIO3_7		(_MX51_PAD_NANDF_WP_B__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_WP_B__NANDF_WP_B		(_MX51_PAD_NANDF_WP_B__NANDF_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WP_B__PATA_DMACK		(_MX51_PAD_NANDF_WP_B__PATA_DMACK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_WP_B__SD3_DATA2		(_MX51_PAD_NANDF_WP_B__SD3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__ECSPI2_SS1		(_MX51_PAD_NANDF_RB0__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__GPIO3_8		(_MX51_PAD_NANDF_RB0__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__NANDF_RB0		(_MX51_PAD_NANDF_RB0__NANDF_RB0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__PATA_DMARQ		(_MX51_PAD_NANDF_RB0__PATA_DMARQ | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB0__SD3_DATA3		(_MX51_PAD_NANDF_RB0__SD3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__CSPI_MOSI		(_MX51_PAD_NANDF_RB1__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__ECSPI2_RDY		(_MX51_PAD_NANDF_RB1__ECSPI2_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__GPIO3_9		(_MX51_PAD_NANDF_RB1__GPIO3_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__NANDF_RB1		(_MX51_PAD_NANDF_RB1__NANDF_RB1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__PATA_IORDY		(_MX51_PAD_NANDF_RB1__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB1__SD4_CMD		(_MX51_PAD_NANDF_RB1__SD4_CMD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__DISP2_WAIT		(_MX51_PAD_NANDF_RB2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__ECSPI2_SCLK		(_MX51_PAD_NANDF_RB2__ECSPI2_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__FEC_COL		(_MX51_PAD_NANDF_RB2__FEC_COL | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
+#define MX51_PAD_NANDF_RB2__GPIO3_10		(_MX51_PAD_NANDF_RB2__GPIO3_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__NANDF_RB2		(_MX51_PAD_NANDF_RB2__NANDF_RB2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__USBH3_H3_DP		(_MX51_PAD_NANDF_RB2__USBH3_H3_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB2__USBH3_NXT		(_MX51_PAD_NANDF_RB2__USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__DISP1_WAIT		(_MX51_PAD_NANDF_RB3__DISP1_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__ECSPI2_MISO		(_MX51_PAD_NANDF_RB3__ECSPI2_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__FEC_RX_CLK		(_MX51_PAD_NANDF_RB3__FEC_RX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_2))
+#define MX51_PAD_NANDF_RB3__GPIO3_11		(_MX51_PAD_NANDF_RB3__GPIO3_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__NANDF_RB3		(_MX51_PAD_NANDF_RB3__NANDF_RB3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__USBH3_CLK		(_MX51_PAD_NANDF_RB3__USBH3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RB3__USBH3_H3_DM		(_MX51_PAD_NANDF_RB3__USBH3_H3_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO_NAND__GPIO_NAND		(_MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_GPIO_NAND__PATA_INTRQ		(_MX51_PAD_GPIO_NAND__PATA_INTRQ | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS0__GPIO3_16		(_MX51_PAD_NANDF_CS0__GPIO3_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS0__NANDF_CS0		(_MX51_PAD_NANDF_CS0__NANDF_CS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS1__GPIO3_17		(_MX51_PAD_NANDF_CS1__GPIO3_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS1__NANDF_CS1		(_MX51_PAD_NANDF_CS1__NANDF_CS1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__CSPI_SCLK		(_MX51_PAD_NANDF_CS2__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__FEC_TX_ER		(_MX51_PAD_NANDF_CS2__FEC_TX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS2__GPIO3_18		(_MX51_PAD_NANDF_CS2__GPIO3_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__NANDF_CS2		(_MX51_PAD_NANDF_CS2__NANDF_CS2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__PATA_CS_0		(_MX51_PAD_NANDF_CS2__PATA_CS_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__SD4_CLK		(_MX51_PAD_NANDF_CS2__SD4_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS2__USBH3_H1_DP		(_MX51_PAD_NANDF_CS2__USBH3_H1_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__FEC_MDC		(_MX51_PAD_NANDF_CS3__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS3__GPIO3_19		(_MX51_PAD_NANDF_CS3__GPIO3_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__NANDF_CS3		(_MX51_PAD_NANDF_CS3__NANDF_CS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__PATA_CS_1		(_MX51_PAD_NANDF_CS3__PATA_CS_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__SD4_DAT0		(_MX51_PAD_NANDF_CS3__SD4_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS3__USBH3_H1_DM		(_MX51_PAD_NANDF_CS3__USBH3_H1_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__FEC_TDATA1		(_MX51_PAD_NANDF_CS4__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS4__GPIO3_20		(_MX51_PAD_NANDF_CS4__GPIO3_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__NANDF_CS4		(_MX51_PAD_NANDF_CS4__NANDF_CS4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__PATA_DA_0		(_MX51_PAD_NANDF_CS4__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__SD4_DAT1		(_MX51_PAD_NANDF_CS4__SD4_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS4__USBH3_STP		(_MX51_PAD_NANDF_CS4__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__FEC_TDATA2		(_MX51_PAD_NANDF_CS5__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS5__GPIO3_21		(_MX51_PAD_NANDF_CS5__GPIO3_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__NANDF_CS5		(_MX51_PAD_NANDF_CS5__NANDF_CS5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__PATA_DA_1		(_MX51_PAD_NANDF_CS5__PATA_DA_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__SD4_DAT2		(_MX51_PAD_NANDF_CS5__SD4_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS5__USBH3_DIR		(_MX51_PAD_NANDF_CS5__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__CSPI_SS3		(_MX51_PAD_NANDF_CS6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__FEC_TDATA3		(_MX51_PAD_NANDF_CS6__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS6__GPIO3_22		(_MX51_PAD_NANDF_CS6__GPIO3_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__NANDF_CS6		(_MX51_PAD_NANDF_CS6__NANDF_CS6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__PATA_DA_2		(_MX51_PAD_NANDF_CS6__PATA_DA_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS6__SD4_DAT3		(_MX51_PAD_NANDF_CS6__SD4_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS7__FEC_TX_EN		(_MX51_PAD_NANDF_CS7__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_CS7__GPIO3_23		(_MX51_PAD_NANDF_CS7__GPIO3_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS7__NANDF_CS7		(_MX51_PAD_NANDF_CS7__NANDF_CS7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_CS7__SD3_CLK		(_MX51_PAD_NANDF_CS7__SD3_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0	(_MX51_PAD_NANDF_RDY_INT__ECSPI2_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	(_MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
+#define MX51_PAD_NANDF_RDY_INT__GPIO3_24	(_MX51_PAD_NANDF_RDY_INT__GPIO3_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT	(_MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD		(_MX51_PAD_NANDF_RDY_INT__SD3_CMD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D15__ECSPI2_MOSI		(_MX51_PAD_NANDF_D15__ECSPI2_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_D15__GPIO3_25		(_MX51_PAD_NANDF_D15__GPIO3_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D15__NANDF_D15		(_MX51_PAD_NANDF_D15__NANDF_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D15__PATA_DATA15		(_MX51_PAD_NANDF_D15__PATA_DATA15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D15__SD3_DAT7		(_MX51_PAD_NANDF_D15__SD3_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D14__ECSPI2_SS3		(_MX51_PAD_NANDF_D14__ECSPI2_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_D14__GPIO3_26		(_MX51_PAD_NANDF_D14__GPIO3_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D14__NANDF_D14		(_MX51_PAD_NANDF_D14__NANDF_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D14__PATA_DATA14		(_MX51_PAD_NANDF_D14__PATA_DATA14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D14__SD3_DAT6		(_MX51_PAD_NANDF_D14__SD3_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D13__ECSPI2_SS2		(_MX51_PAD_NANDF_D13__ECSPI2_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_D13__GPIO3_27		(_MX51_PAD_NANDF_D13__GPIO3_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D13__NANDF_D13		(_MX51_PAD_NANDF_D13__NANDF_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D13__PATA_DATA13		(_MX51_PAD_NANDF_D13__PATA_DATA13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D13__SD3_DAT5		(_MX51_PAD_NANDF_D13__SD3_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D12__ECSPI2_SS1		(_MX51_PAD_NANDF_D12__ECSPI2_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_NANDF_D12__GPIO3_28		(_MX51_PAD_NANDF_D12__GPIO3_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D12__NANDF_D12		(_MX51_PAD_NANDF_D12__NANDF_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D12__PATA_DATA12		(_MX51_PAD_NANDF_D12__PATA_DATA12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D12__SD3_DAT4		(_MX51_PAD_NANDF_D12__SD3_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D11__FEC_RX_DV		(_MX51_PAD_NANDF_D11__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D11__GPIO3_29		(_MX51_PAD_NANDF_D11__GPIO3_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D11__NANDF_D11		(_MX51_PAD_NANDF_D11__NANDF_D11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D11__PATA_DATA11		(_MX51_PAD_NANDF_D11__PATA_DATA11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D11__SD3_DATA3		(_MX51_PAD_NANDF_D11__SD3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D10__GPIO3_30		(_MX51_PAD_NANDF_D10__GPIO3_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D10__NANDF_D10		(_MX51_PAD_NANDF_D10__NANDF_D10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D10__PATA_DATA10		(_MX51_PAD_NANDF_D10__PATA_DATA10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D10__SD3_DATA2		(_MX51_PAD_NANDF_D10__SD3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D9__FEC_RDATA0		(_MX51_PAD_NANDF_D9__FEC_RDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
+#define MX51_PAD_NANDF_D9__GPIO3_31		(_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D9__NANDF_D9		(_MX51_PAD_NANDF_D9__NANDF_D9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D9__PATA_DATA9		(_MX51_PAD_NANDF_D9__PATA_DATA9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D9__SD3_DATA1		(_MX51_PAD_NANDF_D9__SD3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D8__FEC_TDATA0		(_MX51_PAD_NANDF_D8__FEC_TDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_NANDF_D8__GPIO4_0		(_MX51_PAD_NANDF_D8__GPIO4_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D8__NANDF_D8		(_MX51_PAD_NANDF_D8__NANDF_D8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D8__PATA_DATA8		(_MX51_PAD_NANDF_D8__PATA_DATA8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D8__SD3_DATA0		(_MX51_PAD_NANDF_D8__SD3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D7__GPIO4_1		(_MX51_PAD_NANDF_D7__GPIO4_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D7__NANDF_D7		(_MX51_PAD_NANDF_D7__NANDF_D7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D7__PATA_DATA7		(_MX51_PAD_NANDF_D7__PATA_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D7__USBH3_DATA0		(_MX51_PAD_NANDF_D7__USBH3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D6__GPIO4_2		(_MX51_PAD_NANDF_D6__GPIO4_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D6__NANDF_D6		(_MX51_PAD_NANDF_D6__NANDF_D6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D6__PATA_DATA6		(_MX51_PAD_NANDF_D6__PATA_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D6__SD4_LCTL		(_MX51_PAD_NANDF_D6__SD4_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D6__USBH3_DATA1		(_MX51_PAD_NANDF_D6__USBH3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D5__GPIO4_3		(_MX51_PAD_NANDF_D5__GPIO4_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D5__NANDF_D5		(_MX51_PAD_NANDF_D5__NANDF_D5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D5__PATA_DATA5		(_MX51_PAD_NANDF_D5__PATA_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D5__SD4_WP		(_MX51_PAD_NANDF_D5__SD4_WP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D5__USBH3_DATA2		(_MX51_PAD_NANDF_D5__USBH3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D4__GPIO4_4		(_MX51_PAD_NANDF_D4__GPIO4_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D4__NANDF_D4		(_MX51_PAD_NANDF_D4__NANDF_D4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D4__PATA_DATA4		(_MX51_PAD_NANDF_D4__PATA_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D4__SD4_CD		(_MX51_PAD_NANDF_D4__SD4_CD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D4__USBH3_DATA3		(_MX51_PAD_NANDF_D4__USBH3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D3__GPIO4_5		(_MX51_PAD_NANDF_D3__GPIO4_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D3__NANDF_D3		(_MX51_PAD_NANDF_D3__NANDF_D3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D3__PATA_DATA3		(_MX51_PAD_NANDF_D3__PATA_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D3__SD4_DAT4		(_MX51_PAD_NANDF_D3__SD4_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D3__USBH3_DATA4		(_MX51_PAD_NANDF_D3__USBH3_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D2__GPIO4_6		(_MX51_PAD_NANDF_D2__GPIO4_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D2__NANDF_D2		(_MX51_PAD_NANDF_D2__NANDF_D2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D2__PATA_DATA2		(_MX51_PAD_NANDF_D2__PATA_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D2__SD4_DAT5		(_MX51_PAD_NANDF_D2__SD4_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D2__USBH3_DATA5		(_MX51_PAD_NANDF_D2__USBH3_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D1__GPIO4_7		(_MX51_PAD_NANDF_D1__GPIO4_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D1__NANDF_D1		(_MX51_PAD_NANDF_D1__NANDF_D1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D1__PATA_DATA1		(_MX51_PAD_NANDF_D1__PATA_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D1__SD4_DAT6		(_MX51_PAD_NANDF_D1__SD4_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D1__USBH3_DATA6		(_MX51_PAD_NANDF_D1__USBH3_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D0__GPIO4_8		(_MX51_PAD_NANDF_D0__GPIO4_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_NANDF_D0__NANDF_D0		(_MX51_PAD_NANDF_D0__NANDF_D0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D0__PATA_DATA0		(_MX51_PAD_NANDF_D0__PATA_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D0__SD4_DAT7		(_MX51_PAD_NANDF_D0__SD4_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_NANDF_D0__USBH3_DATA7		(_MX51_PAD_NANDF_D0__USBH3_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D8__CSI1_D8		(_MX51_PAD_CSI1_D8__CSI1_D8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D8__GPIO3_12		(_MX51_PAD_CSI1_D8__GPIO3_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI1_D9__CSI1_D9		(_MX51_PAD_CSI1_D9__CSI1_D9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D9__GPIO3_13		(_MX51_PAD_CSI1_D9__GPIO3_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI1_D10__CSI1_D10		(_MX51_PAD_CSI1_D10__CSI1_D10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D11__CSI1_D11		(_MX51_PAD_CSI1_D11__CSI1_D11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D12__CSI1_D12		(_MX51_PAD_CSI1_D12__CSI1_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D13__CSI1_D13		(_MX51_PAD_CSI1_D13__CSI1_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D14__CSI1_D14		(_MX51_PAD_CSI1_D14__CSI1_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D15__CSI1_D15		(_MX51_PAD_CSI1_D15__CSI1_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D16__CSI1_D16		(_MX51_PAD_CSI1_D16__CSI1_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D17__CSI1_D17		(_MX51_PAD_CSI1_D17__CSI1_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D18__CSI1_D18		(_MX51_PAD_CSI1_D18__CSI1_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_D19__CSI1_D19		(_MX51_PAD_CSI1_D19__CSI1_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC		(_MX51_PAD_CSI1_VSYNC__CSI1_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_VSYNC__GPIO3_14		(_MX51_PAD_CSI1_VSYNC__GPIO3_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC		(_MX51_PAD_CSI1_HSYNC__CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_HSYNC__GPIO3_15		(_MX51_PAD_CSI1_HSYNC__GPIO3_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK	(_MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI1_MCLK__CSI1_MCLK		(_MX51_PAD_CSI1_MCLK__CSI1_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D12__CSI2_D12		(_MX51_PAD_CSI2_D12__CSI2_D12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D12__GPIO4_9		(_MX51_PAD_CSI2_D12__GPIO4_9 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_D13__CSI2_D13		(_MX51_PAD_CSI2_D13__CSI2_D13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D13__GPIO4_10		(_MX51_PAD_CSI2_D13__GPIO4_10 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_D14__CSI2_D14		(_MX51_PAD_CSI2_D14__CSI2_D14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D15__CSI2_D15		(_MX51_PAD_CSI2_D15__CSI2_D15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D16__CSI2_D16		(_MX51_PAD_CSI2_D16__CSI2_D16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D17__CSI2_D17		(_MX51_PAD_CSI2_D17__CSI2_D17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D18__CSI2_D18		(_MX51_PAD_CSI2_D18__CSI2_D18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D18__GPIO4_11		(_MX51_PAD_CSI2_D18__GPIO4_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_D19__CSI2_D19		(_MX51_PAD_CSI2_D19__CSI2_D19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_D19__GPIO4_12		(_MX51_PAD_CSI2_D19__GPIO4_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_VSYNC__CSI2_VSYNC		(_MX51_PAD_CSI2_VSYNC__CSI2_VSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_VSYNC__GPIO4_13		(_MX51_PAD_CSI2_VSYNC__GPIO4_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_HSYNC__CSI2_HSYNC		(_MX51_PAD_CSI2_HSYNC__CSI2_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_HSYNC__GPIO4_14		(_MX51_PAD_CSI2_HSYNC__GPIO4_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK	(_MX51_PAD_CSI2_PIXCLK__CSI2_PIXCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSI2_PIXCLK__GPIO4_15		(_MX51_PAD_CSI2_PIXCLK__GPIO4_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_I2C1_CLK__GPIO4_16		(_MX51_PAD_I2C1_CLK__GPIO4_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_I2C1_CLK__I2C1_CLK		(_MX51_PAD_I2C1_CLK__I2C1_CLK | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_I2C1_DAT__GPIO4_17		(_MX51_PAD_I2C1_DAT__GPIO4_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_I2C1_DAT__I2C1_DAT		(_MX51_PAD_I2C1_DAT__I2C1_DAT | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_TXD__AUD3_TXD		(_MX51_PAD_AUD3_BB_TXD__AUD3_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_TXD__GPIO4_18		(_MX51_PAD_AUD3_BB_TXD__GPIO4_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_RXD__AUD3_RXD		(_MX51_PAD_AUD3_BB_RXD__AUD3_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_RXD__GPIO4_19		(_MX51_PAD_AUD3_BB_RXD__GPIO4_19 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_RXD__UART3_RXD		(_MX51_PAD_AUD3_BB_RXD__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_CK__AUD3_TXC		(_MX51_PAD_AUD3_BB_CK__AUD3_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_CK__GPIO4_20		(_MX51_PAD_AUD3_BB_CK__GPIO4_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_FS__AUD3_TXFS		(_MX51_PAD_AUD3_BB_FS__AUD3_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_FS__GPIO4_21		(_MX51_PAD_AUD3_BB_FS__GPIO4_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_AUD3_BB_FS__UART3_TXD		(_MX51_PAD_AUD3_BB_FS__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	(_MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_MOSI__GPIO4_22		(_MX51_PAD_CSPI1_MOSI__GPIO4_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_MOSI__I2C1_SDA		(_MX51_PAD_CSPI1_MOSI__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_CSPI1_MISO__AUD4_RXD		(_MX51_PAD_CSPI1_MISO__AUD4_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSPI1_MISO__ECSPI1_MISO	(_MX51_PAD_CSPI1_MISO__ECSPI1_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_MISO__GPIO4_23		(_MX51_PAD_CSPI1_MISO__GPIO4_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS0__AUD4_TXC		(_MX51_PAD_CSPI1_SS0__AUD4_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS0__ECSPI1_SS0		(_MX51_PAD_CSPI1_SS0__ECSPI1_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS0__GPIO4_24		(_MX51_PAD_CSPI1_SS0__GPIO4_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS1__AUD4_TXD		(_MX51_PAD_CSPI1_SS1__AUD4_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS1__ECSPI1_SS1		(_MX51_PAD_CSPI1_SS1__ECSPI1_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_SS1__GPIO4_25		(_MX51_PAD_CSPI1_SS1__GPIO4_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_RDY__AUD4_TXFS		(_MX51_PAD_CSPI1_RDY__AUD4_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_CSPI1_RDY__ECSPI1_RDY		(_MX51_PAD_CSPI1_RDY__ECSPI1_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_RDY__GPIO4_26		(_MX51_PAD_CSPI1_RDY__GPIO4_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	(_MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_CSPI1_SCLK__GPIO4_27		(_MX51_PAD_CSPI1_SCLK__GPIO4_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_CSPI1_SCLK__I2C1_SCL		(_MX51_PAD_CSPI1_SCLK__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_UART1_RXD__GPIO4_28		(_MX51_PAD_UART1_RXD__GPIO4_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART1_RXD__UART1_RXD		(_MX51_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART1_TXD__GPIO4_29		(_MX51_PAD_UART1_TXD__GPIO4_29 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART1_TXD__PWM2_PWMO		(_MX51_PAD_UART1_TXD__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART1_TXD__UART1_TXD		(_MX51_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART1_RTS__GPIO4_30		(_MX51_PAD_UART1_RTS__GPIO4_30 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART1_RTS__UART1_RTS		(_MX51_PAD_UART1_RTS__UART1_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART1_CTS__GPIO4_31		(_MX51_PAD_UART1_CTS__GPIO4_31 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART1_CTS__UART1_CTS		(_MX51_PAD_UART1_CTS__UART1_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART2_RXD__FIRI_TXD		(_MX51_PAD_UART2_RXD__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART2_RXD__GPIO1_20		(_MX51_PAD_UART2_RXD__GPIO1_20 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART2_RXD__UART2_RXD		(_MX51_PAD_UART2_RXD__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART2_TXD__FIRI_RXD		(_MX51_PAD_UART2_TXD__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART2_TXD__GPIO1_21		(_MX51_PAD_UART2_TXD__GPIO1_21 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART2_TXD__UART2_TXD		(_MX51_PAD_UART2_TXD__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART3_RXD__CSI1_D0		(_MX51_PAD_UART3_RXD__CSI1_D0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART3_RXD__GPIO1_22		(_MX51_PAD_UART3_RXD__GPIO1_22 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART3_RXD__UART1_DTR		(_MX51_PAD_UART3_RXD__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART3_RXD__UART3_RXD		(_MX51_PAD_UART3_RXD__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART3_TXD__CSI1_D1		(_MX51_PAD_UART3_TXD__CSI1_D1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_UART3_TXD__GPIO1_23		(_MX51_PAD_UART3_TXD__GPIO1_23 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_UART3_TXD__UART1_DSR		(_MX51_PAD_UART3_TXD__UART1_DSR | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_UART3_TXD__UART3_TXD		(_MX51_PAD_UART3_TXD__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_OWIRE_LINE__GPIO1_24		(_MX51_PAD_OWIRE_LINE__GPIO1_24 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_OWIRE_LINE__OWIRE_LINE		(_MX51_PAD_OWIRE_LINE__OWIRE_LINE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_OWIRE_LINE__SPDIF_OUT		(_MX51_PAD_OWIRE_LINE__SPDIF_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_ROW0__KEY_ROW0		(_MX51_PAD_KEY_ROW0__KEY_ROW0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_ROW1__KEY_ROW1		(_MX51_PAD_KEY_ROW1__KEY_ROW1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_ROW2__KEY_ROW2		(_MX51_PAD_KEY_ROW2__KEY_ROW2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_ROW3__KEY_ROW3		(_MX51_PAD_KEY_ROW3__KEY_ROW3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL0__KEY_COL0		(_MX51_PAD_KEY_COL0__KEY_COL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL0__PLL1_BYP		(_MX51_PAD_KEY_COL0__PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL1__KEY_COL1		(_MX51_PAD_KEY_COL1__KEY_COL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL1__PLL2_BYP		(_MX51_PAD_KEY_COL1__PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL2__KEY_COL2		(_MX51_PAD_KEY_COL2__KEY_COL2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL2__PLL3_BYP		(_MX51_PAD_KEY_COL2__PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL3__KEY_COL3		(_MX51_PAD_KEY_COL3__KEY_COL3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL4__I2C2_SCL		(_MX51_PAD_KEY_COL4__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_KEY_COL4__KEY_COL4		(_MX51_PAD_KEY_COL4__KEY_COL4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL4__SPDIF_OUT1		(_MX51_PAD_KEY_COL4__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL4__UART1_RI		(_MX51_PAD_KEY_COL4__UART1_RI | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_KEY_COL4__UART3_RTS		(_MX51_PAD_KEY_COL4__UART3_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_KEY_COL5__I2C2_SDA		(_MX51_PAD_KEY_COL5__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_KEY_COL5__KEY_COL5		(_MX51_PAD_KEY_COL5__KEY_COL5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_KEY_COL5__UART1_DCD		(_MX51_PAD_KEY_COL5__UART1_DCD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_KEY_COL5__UART3_CTS		(_MX51_PAD_KEY_COL5__UART3_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_CLK__CSPI_SCLK		(_MX51_PAD_USBH1_CLK__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_CLK__GPIO1_25		(_MX51_PAD_USBH1_CLK__GPIO1_25 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_CLK__I2C2_SCL		(_MX51_PAD_USBH1_CLK__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_USBH1_CLK__USBH1_CLK		(_MX51_PAD_USBH1_CLK__USBH1_CLK | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DIR__CSPI_MOSI		(_MX51_PAD_USBH1_DIR__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DIR__GPIO1_26		(_MX51_PAD_USBH1_DIR__GPIO1_26 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DIR__I2C2_SDA		(_MX51_PAD_USBH1_DIR__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_USBH1_DIR__USBH1_DIR		(_MX51_PAD_USBH1_DIR__USBH1_DIR | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_STP__CSPI_RDY		(_MX51_PAD_USBH1_STP__CSPI_RDY | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_STP__GPIO1_27		(_MX51_PAD_USBH1_STP__GPIO1_27 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_STP__UART3_RXD		(_MX51_PAD_USBH1_STP__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_STP__USBH1_STP		(_MX51_PAD_USBH1_STP__USBH1_STP | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_NXT__CSPI_MISO		(_MX51_PAD_USBH1_NXT__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_NXT__GPIO1_28		(_MX51_PAD_USBH1_NXT__GPIO1_28 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_NXT__UART3_TXD		(_MX51_PAD_USBH1_NXT__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_NXT__USBH1_NXT		(_MX51_PAD_USBH1_NXT__USBH1_NXT | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA0__GPIO1_11		(_MX51_PAD_USBH1_DATA0__GPIO1_11 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA0__UART2_CTS		(_MX51_PAD_USBH1_DATA0__UART2_CTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA0__USBH1_DATA0	(_MX51_PAD_USBH1_DATA0__USBH1_DATA0 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA1__GPIO1_12		(_MX51_PAD_USBH1_DATA1__GPIO1_12 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA1__UART2_RXD		(_MX51_PAD_USBH1_DATA1__UART2_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA1__USBH1_DATA1	(_MX51_PAD_USBH1_DATA1__USBH1_DATA1 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA2__GPIO1_13		(_MX51_PAD_USBH1_DATA2__GPIO1_13 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA2__UART2_TXD		(_MX51_PAD_USBH1_DATA2__UART2_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA2__USBH1_DATA2	(_MX51_PAD_USBH1_DATA2__USBH1_DATA2 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA3__GPIO1_14		(_MX51_PAD_USBH1_DATA3__GPIO1_14 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA3__UART2_RTS		(_MX51_PAD_USBH1_DATA3__UART2_RTS | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA3__USBH1_DATA3	(_MX51_PAD_USBH1_DATA3__USBH1_DATA3 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA4__CSPI_SS0		(_MX51_PAD_USBH1_DATA4__CSPI_SS0 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA4__GPIO1_15		(_MX51_PAD_USBH1_DATA4__GPIO1_15 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA4__USBH1_DATA4	(_MX51_PAD_USBH1_DATA4__USBH1_DATA4 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA5__CSPI_SS1		(_MX51_PAD_USBH1_DATA5__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA5__GPIO1_16		(_MX51_PAD_USBH1_DATA5__GPIO1_16 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA5__USBH1_DATA5	(_MX51_PAD_USBH1_DATA5__USBH1_DATA5 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA6__CSPI_SS3		(_MX51_PAD_USBH1_DATA6__CSPI_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA6__GPIO1_17		(_MX51_PAD_USBH1_DATA6__GPIO1_17 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA6__USBH1_DATA6	(_MX51_PAD_USBH1_DATA6__USBH1_DATA6 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA7__ECSPI1_SS3	(_MX51_PAD_USBH1_DATA7__ECSPI1_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA7__ECSPI2_SS3	(_MX51_PAD_USBH1_DATA7__ECSPI2_SS3 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA7__GPIO1_18		(_MX51_PAD_USBH1_DATA7__GPIO1_18 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_USBH1_DATA7__USBH1_DATA7	(_MX51_PAD_USBH1_DATA7__USBH1_DATA7 | MUX_PAD_CTRL(MX51_USBH1_PAD_CTRL))
+#define MX51_PAD_DI1_PIN11__DI1_PIN11		(_MX51_PAD_DI1_PIN11__DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN11__ECSPI1_SS2		(_MX51_PAD_DI1_PIN11__ECSPI1_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_DI1_PIN11__GPIO3_0		(_MX51_PAD_DI1_PIN11__GPIO3_0 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN12__DI1_PIN12		(_MX51_PAD_DI1_PIN12__DI1_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN12__GPIO3_1		(_MX51_PAD_DI1_PIN12__GPIO3_1 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN13__DI1_PIN13		(_MX51_PAD_DI1_PIN13__DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN13__GPIO3_2		(_MX51_PAD_DI1_PIN13__GPIO3_2 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DI1_D0_CS__DI1_D0_CS		(_MX51_PAD_DI1_D0_CS__DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_D0_CS__GPIO3_3		(_MX51_PAD_DI1_D0_CS__GPIO3_3 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DI1_D1_CS__DI1_D1_CS		(_MX51_PAD_DI1_D1_CS__DI1_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN14		(_MX51_PAD_DI1_D1_CS__DISP1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_D1_CS__DISP1_PIN5		(_MX51_PAD_DI1_D1_CS__DISP1_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_D1_CS__GPIO3_4		(_MX51_PAD_DI1_D1_CS__GPIO3_4 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1	(_MX51_PAD_DISPB2_SER_DIN__DISP1_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN	(_MX51_PAD_DISPB2_SER_DIN__DISPB2_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIN__GPIO3_5	(_MX51_PAD_DISPB2_SER_DIN__GPIO3_5 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6	(_MX51_PAD_DISPB2_SER_DIO__DISP1_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO	(_MX51_PAD_DISPB2_SER_DIO__DISPB2_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_DIO__GPIO3_6	(_MX51_PAD_DISPB2_SER_DIO__GPIO3_6 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17	(_MX51_PAD_DISPB2_SER_CLK__DISP1_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7	(_MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK	(_MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_CLK__GPIO3_7	(_MX51_PAD_DISPB2_SER_CLK__GPIO3_7 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK	(_MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16	(_MX51_PAD_DISPB2_SER_RS__DISP1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8	(_MX51_PAD_DISPB2_SER_RS__DISP1_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS	(_MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS	(_MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISPB2_SER_RS__GPIO3_8		(_MX51_PAD_DISPB2_SER_RS__GPIO3_8 | MUX_PAD_CTRL(MX51_GPIO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT0__DISP1_DAT0		(_MX51_PAD_DISP1_DAT0__DISP1_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT1__DISP1_DAT1		(_MX51_PAD_DISP1_DAT1__DISP1_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT2__DISP1_DAT2		(_MX51_PAD_DISP1_DAT2__DISP1_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT3__DISP1_DAT3		(_MX51_PAD_DISP1_DAT3__DISP1_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT4__DISP1_DAT4		(_MX51_PAD_DISP1_DAT4__DISP1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT5__DISP1_DAT5		(_MX51_PAD_DISP1_DAT5__DISP1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT6__BOOT_USB_SRC	(_MX51_PAD_DISP1_DAT6__BOOT_USB_SRC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT6__DISP1_DAT6		(_MX51_PAD_DISP1_DAT6__DISP1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG	(_MX51_PAD_DISP1_DAT7__BOOT_EEPROM_CFG | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT7__DISP1_DAT7		(_MX51_PAD_DISP1_DAT7__DISP1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT8__BOOT_SRC0		(_MX51_PAD_DISP1_DAT8__BOOT_SRC0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT8__DISP1_DAT8		(_MX51_PAD_DISP1_DAT8__DISP1_DAT8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT9__BOOT_SRC1		(_MX51_PAD_DISP1_DAT9__BOOT_SRC1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT9__DISP1_DAT9		(_MX51_PAD_DISP1_DAT9__DISP1_DAT9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE	(_MX51_PAD_DISP1_DAT10__BOOT_SPARE_SIZE | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT10__DISP1_DAT10	(_MX51_PAD_DISP1_DAT10__DISP1_DAT10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2	(_MX51_PAD_DISP1_DAT11__BOOT_LPB_FREQ2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT11__DISP1_DAT11	(_MX51_PAD_DISP1_DAT11__DISP1_DAT11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL	(_MX51_PAD_DISP1_DAT12__BOOT_MLC_SEL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT12__DISP1_DAT12	(_MX51_PAD_DISP1_DAT12__DISP1_DAT12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0	(_MX51_PAD_DISP1_DAT13__BOOT_MEM_CTL0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT13__DISP1_DAT13	(_MX51_PAD_DISP1_DAT13__DISP1_DAT13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1	(_MX51_PAD_DISP1_DAT14__BOOT_MEM_CTL1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT14__DISP1_DAT14	(_MX51_PAD_DISP1_DAT14__DISP1_DAT14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH	(_MX51_PAD_DISP1_DAT15__BOOT_BUS_WIDTH | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT15__DISP1_DAT15	(_MX51_PAD_DISP1_DAT15__DISP1_DAT15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0	(_MX51_PAD_DISP1_DAT16__BOOT_PAGE_SIZE0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT16__DISP1_DAT16	(_MX51_PAD_DISP1_DAT16__DISP1_DAT16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1	(_MX51_PAD_DISP1_DAT17__BOOT_PAGE_SIZE1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT17__DISP1_DAT17	(_MX51_PAD_DISP1_DAT17__DISP1_DAT17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0	(_MX51_PAD_DISP1_DAT18__BOOT_WEIM_MUXED0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT18__DISP1_DAT18	(_MX51_PAD_DISP1_DAT18__DISP1_DAT18 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN11	(_MX51_PAD_DISP1_DAT18__DISP2_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT18__DISP2_PIN5	(_MX51_PAD_DISP1_DAT18__DISP2_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1	(_MX51_PAD_DISP1_DAT19__BOOT_WEIM_MUXED1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT19__DISP1_DAT19	(_MX51_PAD_DISP1_DAT19__DISP1_DAT19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN12	(_MX51_PAD_DISP1_DAT19__DISP2_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT19__DISP2_PIN6	(_MX51_PAD_DISP1_DAT19__DISP2_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0	(_MX51_PAD_DISP1_DAT20__BOOT_MEM_TYPE0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT20__DISP1_DAT20	(_MX51_PAD_DISP1_DAT20__DISP1_DAT20 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN13	(_MX51_PAD_DISP1_DAT20__DISP2_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT20__DISP2_PIN7	(_MX51_PAD_DISP1_DAT20__DISP2_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1	(_MX51_PAD_DISP1_DAT21__BOOT_MEM_TYPE1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT21__DISP1_DAT21	(_MX51_PAD_DISP1_DAT21__DISP1_DAT21 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN14	(_MX51_PAD_DISP1_DAT21__DISP2_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT21__DISP2_PIN8	(_MX51_PAD_DISP1_DAT21__DISP2_PIN8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0	(_MX51_PAD_DISP1_DAT22__BOOT_LPB_FREQ0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT22__DISP1_DAT22	(_MX51_PAD_DISP1_DAT22__DISP1_DAT22 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT22__DISP2_D0_CS	(_MX51_PAD_DISP1_DAT22__DISP2_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT22__DISP2_DAT16	(_MX51_PAD_DISP1_DAT22__DISP2_DAT16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1	(_MX51_PAD_DISP1_DAT23__BOOT_LPB_FREQ1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT23__DISP1_DAT23	(_MX51_PAD_DISP1_DAT23__DISP1_DAT23 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT23__DISP2_D1_CS	(_MX51_PAD_DISP1_DAT23__DISP2_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT23__DISP2_DAT17	(_MX51_PAD_DISP1_DAT23__DISP2_DAT17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP1_DAT23__DISP2_SER_CS	(_MX51_PAD_DISP1_DAT23__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN3__DI1_PIN3		(_MX51_PAD_DI1_PIN3__DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI1_PIN2__DI1_PIN2		(_MX51_PAD_DI1_PIN2__DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP2__DISP1_SER_CLK		(_MX51_PAD_DI_GP2__DISP1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP2__DISP2_WAIT		(_MX51_PAD_DI_GP2__DISP2_WAIT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP3__CSI1_DATA_EN		(_MX51_PAD_DI_GP3__CSI1_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP3__DISP1_SER_DIO		(_MX51_PAD_DI_GP3__DISP1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP3__FEC_TX_ER		(_MX51_PAD_DI_GP3__FEC_TX_ER | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DI2_PIN4__CSI2_DATA_EN		(_MX51_PAD_DI2_PIN4__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_PIN4__DI2_PIN4		(_MX51_PAD_DI2_PIN4__DI2_PIN4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_PIN4__FEC_CRS		(_MX51_PAD_DI2_PIN4__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_PIN2__DI2_PIN2		(_MX51_PAD_DI2_PIN2__DI2_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_PIN2__FEC_MDC		(_MX51_PAD_DI2_PIN2__FEC_MDC | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DI2_PIN3__DI2_PIN3		(_MX51_PAD_DI2_PIN3__DI2_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_PIN3__FEC_MDIO		(_MX51_PAD_DI2_PIN3__FEC_MDIO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	(_MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	(_MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP4__DI2_PIN15		(_MX51_PAD_DI_GP4__DI2_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP4__DISP1_SER_DIN		(_MX51_PAD_DI_GP4__DISP1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP4__DISP2_PIN1		(_MX51_PAD_DI_GP4__DISP2_PIN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DI_GP4__FEC_RDATA2		(_MX51_PAD_DI_GP4__FEC_RDATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT0__DISP2_DAT0		(_MX51_PAD_DISP2_DAT0__DISP2_DAT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT0__FEC_RDATA3		(_MX51_PAD_DISP2_DAT0__FEC_RDATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT0__KEY_COL6		(_MX51_PAD_DISP2_DAT0__KEY_COL6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT0__UART3_RXD		(_MX51_PAD_DISP2_DAT0__UART3_RXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT0__USBH3_CLK		(_MX51_PAD_DISP2_DAT0__USBH3_CLK | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT1__DISP2_DAT1		(_MX51_PAD_DISP2_DAT1__DISP2_DAT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT1__FEC_RX_ER		(_MX51_PAD_DISP2_DAT1__FEC_RX_ER | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT1__KEY_COL7		(_MX51_PAD_DISP2_DAT1__KEY_COL7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT1__UART3_TXD		(_MX51_PAD_DISP2_DAT1__UART3_TXD | MUX_PAD_CTRL(MX51_UART_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT1__USBH3_DIR		(_MX51_PAD_DISP2_DAT1__USBH3_DIR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT2__DISP2_DAT2		(_MX51_PAD_DISP2_DAT2__DISP2_DAT2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT3__DISP2_DAT3		(_MX51_PAD_DISP2_DAT3__DISP2_DAT3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT4__DISP2_DAT4		(_MX51_PAD_DISP2_DAT4__DISP2_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT5__DISP2_DAT5		(_MX51_PAD_DISP2_DAT5__DISP2_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT6__DISP2_DAT6		(_MX51_PAD_DISP2_DAT6__DISP2_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT6__FEC_TDATA1		(_MX51_PAD_DISP2_DAT6__FEC_TDATA1 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DISP2_DAT6__GPIO1_19		(_MX51_PAD_DISP2_DAT6__GPIO1_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT6__KEY_ROW4		(_MX51_PAD_DISP2_DAT6__KEY_ROW4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT6__USBH3_STP		(_MX51_PAD_DISP2_DAT6__USBH3_STP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT7__DISP2_DAT7		(_MX51_PAD_DISP2_DAT7__DISP2_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT7__FEC_TDATA2		(_MX51_PAD_DISP2_DAT7__FEC_TDATA2 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DISP2_DAT7__GPIO1_29		(_MX51_PAD_DISP2_DAT7__GPIO1_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT7__KEY_ROW5		(_MX51_PAD_DISP2_DAT7__KEY_ROW5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT7__USBH3_NXT		(_MX51_PAD_DISP2_DAT7__USBH3_NXT | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT8__DISP2_DAT8		(_MX51_PAD_DISP2_DAT8__DISP2_DAT8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT8__FEC_TDATA3		(_MX51_PAD_DISP2_DAT8__FEC_TDATA3 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DISP2_DAT8__GPIO1_30		(_MX51_PAD_DISP2_DAT8__GPIO1_30 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT8__KEY_ROW6		(_MX51_PAD_DISP2_DAT8__KEY_ROW6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT8__USBH3_DATA0	(_MX51_PAD_DISP2_DAT8__USBH3_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT9__AUD6_RXC		(_MX51_PAD_DISP2_DAT9__AUD6_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT9__DISP2_DAT9		(_MX51_PAD_DISP2_DAT9__DISP2_DAT9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT9__FEC_TX_EN		(_MX51_PAD_DISP2_DAT9__FEC_TX_EN | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DISP2_DAT9__GPIO1_31		(_MX51_PAD_DISP2_DAT9__GPIO1_31 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT9__USBH3_DATA1	(_MX51_PAD_DISP2_DAT9__USBH3_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT10__DISP2_DAT10	(_MX51_PAD_DISP2_DAT10__DISP2_DAT10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT10__DISP2_SER_CS	(_MX51_PAD_DISP2_DAT10__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT10__FEC_COL		(_MX51_PAD_DISP2_DAT10__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT10__KEY_ROW7		(_MX51_PAD_DISP2_DAT10__KEY_ROW7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT10__USBH3_DATA2	(_MX51_PAD_DISP2_DAT10__USBH3_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT11__AUD6_TXD		(_MX51_PAD_DISP2_DAT11__AUD6_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT11__DISP2_DAT11	(_MX51_PAD_DISP2_DAT11__DISP2_DAT11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT11__FEC_RX_CLK	(_MX51_PAD_DISP2_DAT11__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT11__GPIO1_10		(_MX51_PAD_DISP2_DAT11__GPIO1_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT11__USBH3_DATA3	(_MX51_PAD_DISP2_DAT11__USBH3_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT12__AUD6_RXD		(_MX51_PAD_DISP2_DAT12__AUD6_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT12__DISP2_DAT12	(_MX51_PAD_DISP2_DAT12__DISP2_DAT12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT12__FEC_RX_DV		(_MX51_PAD_DISP2_DAT12__FEC_RX_DV | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT12__USBH3_DATA4	(_MX51_PAD_DISP2_DAT12__USBH3_DATA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT13__AUD6_TXC		(_MX51_PAD_DISP2_DAT13__AUD6_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT13__DISP2_DAT13	(_MX51_PAD_DISP2_DAT13__DISP2_DAT13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT13__FEC_TX_CLK	(_MX51_PAD_DISP2_DAT13__FEC_TX_CLK | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
+#define MX51_PAD_DISP2_DAT13__USBH3_DATA5	(_MX51_PAD_DISP2_DAT13__USBH3_DATA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT14__AUD6_TXFS		(_MX51_PAD_DISP2_DAT14__AUD6_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT14__DISP2_DAT14	(_MX51_PAD_DISP2_DAT14__DISP2_DAT14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT14__FEC_RDATA0	(_MX51_PAD_DISP2_DAT14__FEC_RDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_4))
+#define MX51_PAD_DISP2_DAT14__USBH3_DATA6	(_MX51_PAD_DISP2_DAT14__USBH3_DATA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT15__AUD6_RXFS		(_MX51_PAD_DISP2_DAT15__AUD6_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT15__DISP1_SER_CS	(_MX51_PAD_DISP2_DAT15__DISP1_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT15__DISP2_DAT15	(_MX51_PAD_DISP2_DAT15__DISP2_DAT15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_DISP2_DAT15__FEC_TDATA0	(_MX51_PAD_DISP2_DAT15__FEC_TDATA0 | MUX_PAD_CTRL(MX51_PAD_CTRL_5))
+#define MX51_PAD_DISP2_DAT15__USBH3_DATA7	(_MX51_PAD_DISP2_DAT15__USBH3_DATA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_CMD__AUD5_RXFS		(_MX51_PAD_SD1_CMD__AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_CMD__CSPI_MOSI		(_MX51_PAD_SD1_CMD__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_CMD__SD1_CMD		(_MX51_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
+#define MX51_PAD_SD1_CLK__AUD5_RXC		(_MX51_PAD_SD1_CLK__AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_CLK__CSPI_SCLK		(_MX51_PAD_SD1_CLK__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_CLK__SD1_CLK		(_MX51_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
+#define MX51_PAD_SD1_DATA0__AUD5_TXD		(_MX51_PAD_SD1_DATA0__AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA0__CSPI_MISO		(_MX51_PAD_SD1_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD1_DATA0__SD1_DATA0		(_MX51_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA0__EIM_DA0		(_MX51_PAD_EIM_DA0__EIM_DA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA1__EIM_DA1		(_MX51_PAD_EIM_DA1__EIM_DA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA2__EIM_DA2		(_MX51_PAD_EIM_DA2__EIM_DA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA3__EIM_DA3		(_MX51_PAD_EIM_DA3__EIM_DA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA1__AUD5_RXD		(_MX51_PAD_SD1_DATA1__AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA1__SD1_DATA1		(_MX51_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA4__EIM_DA4		(_MX51_PAD_EIM_DA4__EIM_DA4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA5__EIM_DA5		(_MX51_PAD_EIM_DA5__EIM_DA5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA6__EIM_DA6		(_MX51_PAD_EIM_DA6__EIM_DA6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA7__EIM_DA7		(_MX51_PAD_EIM_DA7__EIM_DA7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA2__AUD5_TXC		(_MX51_PAD_SD1_DATA2__AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA2__SD1_DATA2		(_MX51_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA10__EIM_DA10		(_MX51_PAD_EIM_DA10__EIM_DA10 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA11__EIM_DA11		(_MX51_PAD_EIM_DA11__EIM_DA11 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA8__EIM_DA8		(_MX51_PAD_EIM_DA8__EIM_DA8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA9__EIM_DA9		(_MX51_PAD_EIM_DA9__EIM_DA9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA3__AUD5_TXFS		(_MX51_PAD_SD1_DATA3__AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD1_DATA3__CSPI_SS1		(_MX51_PAD_SD1_DATA3__CSPI_SS1 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD1_DATA3__SD1_DATA3		(_MX51_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_0__CSPI_SS2		(_MX51_PAD_GPIO1_0__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_GPIO1_0__GPIO1_0		(_MX51_PAD_GPIO1_0__GPIO1_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_0__SD1_CD		(_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
+#define MX51_PAD_GPIO1_1__CSPI_MISO		(_MX51_PAD_GPIO1_1__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_GPIO1_1__GPIO1_1		(_MX51_PAD_GPIO1_1__GPIO1_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_1__SD1_WP		(_MX51_PAD_GPIO1_1__SD1_WP | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
+#define MX51_PAD_EIM_DA12__EIM_DA12		(_MX51_PAD_EIM_DA12__EIM_DA12 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA13__EIM_DA13		(_MX51_PAD_EIM_DA13__EIM_DA13 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA14__EIM_DA14		(_MX51_PAD_EIM_DA14__EIM_DA14 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_EIM_DA15__EIM_DA15		(_MX51_PAD_EIM_DA15__EIM_DA15 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_CMD__CSPI_MOSI		(_MX51_PAD_SD2_CMD__CSPI_MOSI | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD2_CMD__I2C1_SCL		(_MX51_PAD_SD2_CMD__I2C1_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_SD2_CMD__SD2_CMD		(_MX51_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL))
+#define MX51_PAD_SD2_CLK__CSPI_SCLK		(_MX51_PAD_SD2_CLK__CSPI_SCLK | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD2_CLK__I2C1_SDA		(_MX51_PAD_SD2_CLK__I2C1_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_SD2_CLK__SD2_CLK		(_MX51_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS))
+#define MX51_PAD_SD2_DATA0__CSPI_MISO		(_MX51_PAD_SD2_DATA0__CSPI_MISO | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD2_DATA0__SD1_DAT4		(_MX51_PAD_SD2_DATA0__SD1_DAT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA0__SD2_DATA0		(_MX51_PAD_SD2_DATA0__SD2_DATA0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA1__SD1_DAT5		(_MX51_PAD_SD2_DATA1__SD1_DAT5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA1__SD2_DATA1		(_MX51_PAD_SD2_DATA1__SD2_DATA1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA1__USBH3_H2_DP		(_MX51_PAD_SD2_DATA1__USBH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA2__SD1_DAT6		(_MX51_PAD_SD2_DATA2__SD1_DAT6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA2__SD2_DATA2		(_MX51_PAD_SD2_DATA2__SD2_DATA2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA2__USBH3_H2_DM		(_MX51_PAD_SD2_DATA2__USBH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA3__CSPI_SS2		(_MX51_PAD_SD2_DATA3__CSPI_SS2 | MUX_PAD_CTRL(MX51_ECSPI_PAD_CTRL))
+#define MX51_PAD_SD2_DATA3__SD1_DAT7		(_MX51_PAD_SD2_DATA3__SD1_DAT7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_SD2_DATA3__SD2_DATA3		(_MX51_PAD_SD2_DATA3__SD2_DATA3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_2__CCM_OUT_2		(_MX51_PAD_GPIO1_2__CCM_OUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_2__GPIO1_2		(_MX51_PAD_GPIO1_2__GPIO1_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_2__I2C2_SCL		(_MX51_PAD_GPIO1_2__I2C2_SCL | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_GPIO1_2__PLL1_BYP		(_MX51_PAD_GPIO1_2__PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_2__PWM1_PWMO		(_MX51_PAD_GPIO1_2__PWM1_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_3__GPIO1_3		(_MX51_PAD_GPIO1_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_3__I2C2_SDA		(_MX51_PAD_GPIO1_3__I2C2_SDA | MUX_PAD_CTRL(MX51_I2C_PAD_CTRL))
+#define MX51_PAD_GPIO1_3__PLL2_BYP		(_MX51_PAD_GPIO1_3__PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_3__PWM2_PWMO		(_MX51_PAD_GPIO1_3__PWM2_PWMO | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ	(_MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B	(_MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_4__DISP2_EXT_CLK		(_MX51_PAD_GPIO1_4__DISP2_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_4__EIM_RDY		(_MX51_PAD_GPIO1_4__EIM_RDY | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_4__GPIO1_4		(_MX51_PAD_GPIO1_4__GPIO1_4 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_4__WDOG1_WDOG_B		(_MX51_PAD_GPIO1_4__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_5__CSI2_MCLK		(_MX51_PAD_GPIO1_5__CSI2_MCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_5__DISP2_PIN16		(_MX51_PAD_GPIO1_5__DISP2_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_5__GPIO1_5		(_MX51_PAD_GPIO1_5__GPIO1_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_5__WDOG2_WDOG_B		(_MX51_PAD_GPIO1_5__WDOG2_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_6__DISP2_PIN17		(_MX51_PAD_GPIO1_6__DISP2_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_6__GPIO1_6		(_MX51_PAD_GPIO1_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_6__REF_EN_B		(_MX51_PAD_GPIO1_6__REF_EN_B | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_7__CCM_OUT_0		(_MX51_PAD_GPIO1_7__CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_7__GPIO1_7		(_MX51_PAD_GPIO1_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_7__SD2_WP		(_MX51_PAD_GPIO1_7__SD2_WP | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
+#define MX51_PAD_GPIO1_7__SPDIF_OUT1		(_MX51_PAD_GPIO1_7__SPDIF_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_8__CSI2_DATA_EN		(_MX51_PAD_GPIO1_8__CSI2_DATA_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_8__GPIO1_8		(_MX51_PAD_GPIO1_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_8__SD2_CD		(_MX51_PAD_GPIO1_8__SD2_CD | MUX_PAD_CTRL(MX51_ESDHC_PAD_CTRL))
+#define MX51_PAD_GPIO1_8__USBH3_PWR		(_MX51_PAD_GPIO1_8__USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__CCM_OUT_1		(_MX51_PAD_GPIO1_9__CCM_OUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__DISP2_D1_CS		(_MX51_PAD_GPIO1_9__DISP2_D1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__DISP2_SER_CS		(_MX51_PAD_GPIO1_9__DISP2_SER_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__GPIO1_9		(_MX51_PAD_GPIO1_9__GPIO1_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__SD2_LCTL		(_MX51_PAD_GPIO1_9__SD2_LCTL | MUX_PAD_CTRL(NO_PAD_CTRL))
+#define MX51_PAD_GPIO1_9__USBH3_OC		(_MX51_PAD_GPIO1_9__USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
 
 #endif /* __MACH_IOMUX_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
new file mode 100644
index 00000000000..5deee019c29
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -0,0 +1,323 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc..
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_IOMUX_MX53_H__
+#define __MACH_IOMUX_MX53_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * various IOMUX alternate output functions (1-7)
+ */
+typedef enum iomux_config {
+	IOMUX_CONFIG_ALT0,
+	IOMUX_CONFIG_ALT1,
+	IOMUX_CONFIG_ALT2,
+	IOMUX_CONFIG_ALT3,
+	IOMUX_CONFIG_ALT4,
+	IOMUX_CONFIG_ALT5,
+	IOMUX_CONFIG_ALT6,
+	IOMUX_CONFIG_ALT7,
+	IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
+	IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
+} iomux_pin_cfg_t;
+
+/* These 2 defines are for pins that may not have a mux register, but could
+ * have a pad setting register, and vice-versa. */
+#define NON_MUX_I	0x00
+#define NON_PAD_I	0x00
+
+#define MX53_UART_PAD_CTRL		(PAD_CTL_PKE | PAD_CTL_PUE |	\
+		PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
+/* UART1 */
+#define MX53_PAD_CSI0_D10__UART1_TXD	IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_CSI0_D11__UART1_RXD	IOMUX_PAD(0x418, 0xEC, 2, 0x878, 1, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DIOW__UART1_TXD	IOMUX_PAD(0x5F0, 0x270, 3, 0x0,	0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DMACK__UART1_RXD	IOMUX_PAD(0x5F4, 0x274, 3, 0x880, 3, MX53_UART_PAD_CTRL)
+
+/* UART2 */
+#define MX53_PAD_ATA_BUFFER_EN__UART2_RXD	IOMUX_PAD(0x5FC, 0x27C, 3, 0x880, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DMARQ__UART2_TXD	IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DIOR__UART2_RTS	IOMUX_PAD(0x604, 0x284, 3, 0x87C, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_INTRQ__UART2_CTS	IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, MX53_UART_PAD_CTRL)
+
+/* UART3 */
+#define MX53_PAD_ATA_CS_0__UART3_TXD	IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_CS_1__UART3_RXD	IOMUX_PAD(0x620, 0x2A0, 4, 0x888, 3, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DA_1__UART3_CTS	IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, MX53_UART_PAD_CTRL)
+#define MX53_PAD_ATA_DA_2__UART3_RTS	IOMUX_PAD(0x618, 0x298, 4, 0x884, 5, MX53_UART_PAD_CTRL)
+
+#define MX53_PAD_GPIO_19__GPIO_4_5		IOMUX_PAD(0x348, 0x20,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL0__GPIO_4_6		IOMUX_PAD(0x34C, 0x24,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW0__GPIO_4_7		IOMUX_PAD(0x350, 0x28,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL1__GPIO_4_8		IOMUX_PAD(0x354, 0x2C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW1__GPIO_4_9		IOMUX_PAD(0x358, 0x30,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL2__GPIO_4_10		IOMUX_PAD(0x35C, 0x34,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW2__GPIO_4_11	IOMUX_PAD(0x360, 0x38,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL3__GPIO_4_12		IOMUX_PAD(0x364, 0x3C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW3__GPIO_4_13	IOMUX_PAD(0x368, 0x40,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_COL4__GPIO_4_14		IOMUX_PAD(0x36C, 0x44,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_KEY_ROW4__GPIO_4_15	IOMUX_PAD(0x370, 0x48,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_KEYPAD__NVCC_KEYPAD	IOMUX_PAD(0x374, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_DISP_CLK__GPIO_4_16	IOMUX_PAD(0x378, 0x4C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN15__GPIO_4_17	IOMUX_PAD(0x37C, 0x50,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN2__GPIO_4_18		IOMUX_PAD(0x380, 0x54,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN3__GPIO_4_19		IOMUX_PAD(0x384, 0x58,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DI0_PIN4__GPIO_4_20		IOMUX_PAD(0x388, 0x5C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT0__GPIO_4_21	IOMUX_PAD(0x38C, 0x60,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT1__GPIO_4_22	IOMUX_PAD(0x390, 0x64,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT2__GPIO_4_23	IOMUX_PAD(0x394, 0x68,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT3__GPIO_4_24	IOMUX_PAD(0x398, 0x6C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT4__GPIO_4_25	IOMUX_PAD(0x39C, 0x70,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT5__GPIO_4_26	IOMUX_PAD(0x3A0, 0x74,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT6__GPIO_4_27	IOMUX_PAD(0x3A4, 0x78,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT7__GPIO_4_28	IOMUX_PAD(0x3A8, 0x7C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT8__GPIO_4_29	IOMUX_PAD(0x3AC, 0x80,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT9__GPIO_4_30	IOMUX_PAD(0x3B0, 0x84,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT10__GPIO_4_31	IOMUX_PAD(0x3B4, 0x88,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT11__GPIO_5_5	IOMUX_PAD(0x3B8, 0x8C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT12__GPIO_5_6	IOMUX_PAD(0x3BC, 0x90,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT13__GPIO_5_7	IOMUX_PAD(0x3C0, 0x94,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT14__GPIO_5_8	IOMUX_PAD(0x3C4, 0x98,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT15__GPIO_5_9	IOMUX_PAD(0x3C8, 0x9C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT16__GPIO_5_10	IOMUX_PAD(0x3CC, 0xA0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT17__GPIO_5_11	IOMUX_PAD(0x3D0, 0xA4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT18__GPIO_5_12	IOMUX_PAD(0x3D4, 0xA8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT19__GPIO_5_13	IOMUX_PAD(0x3D8, 0xAC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT20__GPIO_5_14	IOMUX_PAD(0x3DC, 0xB0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT21__GPIO_5_15	IOMUX_PAD(0x3E0, 0xB4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT22__GPIO_5_16	IOMUX_PAD(0x3E4, 0xB8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DISP0_DAT23__GPIO_5_17	IOMUX_PAD(0x3E8, 0xBC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_PIXCLK__GPIO_5_18	IOMUX_PAD(0x3EC, 0xC0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_MCLK__GPIO_5_19	IOMUX_PAD(0x3F0, 0xC4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_DATA_EN__GPIO_5_20	IOMUX_PAD(0x3F4, 0xC8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_VSYNC__GPIO_5_21	IOMUX_PAD(0x3F8, 0xCC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D4__GPIO_5_22		IOMUX_PAD(0x3FC, 0xD0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D5__GPIO_5_23		IOMUX_PAD(0x400, 0xD4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D6__GPIO_5_24		IOMUX_PAD(0x404, 0xD8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D7__GPIO_5_25		IOMUX_PAD(0x408, 0xDC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D8__GPIO_5_26		IOMUX_PAD(0x40C, 0xE0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D9__GPIO_5_27		IOMUX_PAD(0x410, 0xE4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D10__GPIO_5_28		IOMUX_PAD(0x414, 0xE8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D11__GPIO_5_29		IOMUX_PAD(0x418, 0xEC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D12__GPIO_5_30		IOMUX_PAD(0x41C, 0xF0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D13__GPIO_5_31		IOMUX_PAD(0x420, 0xF4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D14__GPIO_6_0		IOMUX_PAD(0x424, 0xF8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D15__GPIO_6_1		IOMUX_PAD(0x428, 0xFC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D16__GPIO_6_2		IOMUX_PAD(0x42C, 0x100,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D17__GPIO_6_3		IOMUX_PAD(0x430, 0x104,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D18__GPIO_6_4		IOMUX_PAD(0x434, 0x108,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_CSI0_D19__GPIO_6_5		IOMUX_PAD(0x438, 0x10C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_CSI0__NVCC_CSI0	IOMUX_PAD(0x43C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TMS__JTAG_TMS		IOMUX_PAD(0x440, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_MOD__JTAG_MOD		IOMUX_PAD(0x444, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TRSTB__JTAG_TRSTB	IOMUX_PAD(0x448, NON_MUX_I,IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TDI__JTAG_TDI		IOMUX_PAD(0x44C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TCK__JTAG_TCK		IOMUX_PAD(0x450, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_JTAG_TDO__JTAG_TDO		IOMUX_PAD(0x454, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A25__GPIO_5_2		IOMUX_PAD(0x458, 0x110,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB2__GPIO_2_30		IOMUX_PAD(0x45C, 0x114,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D16__GPIO_3_16		IOMUX_PAD(0x460, 0x118,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D17__GPIO_3_17		IOMUX_PAD(0x464, 0x11C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D18__GPIO_3_18		IOMUX_PAD(0x468, 0x120,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D19__GPIO_3_19		IOMUX_PAD(0x46C, 0x124,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D20__GPIO_3_20		IOMUX_PAD(0x470, 0x128,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D21__GPIO_3_21		IOMUX_PAD(0x474, 0x12C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D22__GPIO_3_22		IOMUX_PAD(0x478, 0x130,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D23__GPIO_3_23		IOMUX_PAD(0x47C, 0x134,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB3__GPIO_2_31		IOMUX_PAD(0x480, 0x138,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D24__GPIO_3_24		IOMUX_PAD(0x484, 0x13C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D25__GPIO_3_25		IOMUX_PAD(0x488, 0x140,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D26__GPIO_3_26		IOMUX_PAD(0x48C, 0x144,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D27__GPIO_3_27		IOMUX_PAD(0x490, 0x148,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D28__GPIO_3_28		IOMUX_PAD(0x494, 0x14C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D29__GPIO_3_29		IOMUX_PAD(0x498, 0x150,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D30__GPIO_3_30		IOMUX_PAD(0x49C, 0x154,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_D31__GPIO_3_31		IOMUX_PAD(0x4A0, 0x158,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_EIM1__NVCC_EIM1	IOMUX_PAD(0x4A4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A24__GPIO_5_4		IOMUX_PAD(0x4A8, 0x15C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A23__GPIO_6_6		IOMUX_PAD(0x4AC, 0x160,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A22__GPIO_2_16		IOMUX_PAD(0x4B0, 0x164,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A21__GPIO_2_17		IOMUX_PAD(0x4B4, 0x168,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A20__GPIO_2_18		IOMUX_PAD(0x4B8, 0x16C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A19__GPIO_2_19		IOMUX_PAD(0x4BC, 0x170,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A18__GPIO_2_20		IOMUX_PAD(0x4C0, 0x174,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A17__GPIO_2_21		IOMUX_PAD(0x4C4, 0x178,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_A16__GPIO_2_22		IOMUX_PAD(0x4C8, 0x17C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS0__GPIO_2_23		IOMUX_PAD(0x4CC, 0x180,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_CS1__GPIO_2_24		IOMUX_PAD(0x4D0, 0x184,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_OE__GPIO_2_25		IOMUX_PAD(0x4D4, 0x188,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_RW__GPIO_2_26		IOMUX_PAD(0x4D8, 0x18C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_LBA__GPIO_2_27		IOMUX_PAD(0x4DC, 0x190,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_EIM4__NVCC_EIM4	IOMUX_PAD(0x4E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB0__GPIO_2_28		IOMUX_PAD(0x4E4, 0x194,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_EB1__GPIO_2_29		IOMUX_PAD(0x4E8, 0x198,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA0__GPIO_3_0		IOMUX_PAD(0x4EC, 0x19C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA1__GPIO_3_1		IOMUX_PAD(0x4F0, 0x1A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA2__GPIO_3_2		IOMUX_PAD(0x4F4, 0x1A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA3__GPIO_3_3		IOMUX_PAD(0x4F8, 0x1A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA4__GPIO_3_4		IOMUX_PAD(0x4FC, 0x1AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA5__GPIO_3_5		IOMUX_PAD(0x500, 0x1B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA6__GPIO_3_6		IOMUX_PAD(0x504, 0x1B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA7__GPIO_3_7		IOMUX_PAD(0x508, 0x1B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA8__GPIO_3_8		IOMUX_PAD(0x50C, 0x1BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA9__GPIO_3_9		IOMUX_PAD(0x510, 0x1C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA10__GPIO_3_10		IOMUX_PAD(0x514, 0x1C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA11__GPIO_3_11		IOMUX_PAD(0x518, 0x1C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA12__GPIO_3_12		IOMUX_PAD(0x51C, 0x1CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA13__GPIO_3_13		IOMUX_PAD(0x520, 0x1D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA14__GPIO_3_14		IOMUX_PAD(0x524, 0x1D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_DA15__GPIO_3_15		IOMUX_PAD(0x528, 0x1D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WE_B__GPIO_6_12	IOMUX_PAD(0x52C, 0x1DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RE_B__GPIO_6_13	IOMUX_PAD(0x530, 0x1E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_WAIT__GPIO_5_0		IOMUX_PAD(0x534, 0x1E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_EIM_BCLK__EIM_BCLK		IOMUX_PAD(0x538, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_EIM7__NVCC_EIM7	IOMUX_PAD(0x53C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX3_P__GPIO_6_22	IOMUX_PAD(NON_PAD_I, 0x1EC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX2_P__GPIO_6_24	IOMUX_PAD(NON_PAD_I, 0x1F0, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_CLK_P__GPIO_6_26	IOMUX_PAD(NON_PAD_I, 0x1F4, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX1_P__GPIO_6_28	IOMUX_PAD(NON_PAD_I, 0x1F8, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS1_TX0_P__GPIO_6_30	IOMUX_PAD(NON_PAD_I, 0x1FC, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX3_P__GPIO_7_22	IOMUX_PAD(NON_PAD_I, 0x200, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_CLK_P__GPIO_7_24	IOMUX_PAD(NON_PAD_I, 0x204, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX2_P__GPIO_7_26	IOMUX_PAD(NON_PAD_I, 0x208, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX1_P__GPIO_7_28	IOMUX_PAD(NON_PAD_I, 0x20C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_LVDS0_TX0_P__GPIO_7_30	IOMUX_PAD(NON_PAD_I, 0x210, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_10__GPIO_4_0		IOMUX_PAD(0x540, 0x214, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_11__GPIO_4_1		IOMUX_PAD(0x544, 0x218, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_12__GPIO_4_2		IOMUX_PAD(0x548, 0x21C, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_13__GPIO_4_3		IOMUX_PAD(0x54C, 0x220, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_14__GPIO_4_4		IOMUX_PAD(0x550, 0x224, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM3__DRAM_DQM3	IOMUX_PAD(0x554, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS3__DRAM_SDQS3	IOMUX_PAD(0x558, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCKE1__DRAM_SDCKE1	IOMUX_PAD(0x55C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM2__DRAM_DQM2	IOMUX_PAD(0x560, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDODT1__DRAM_SDODT1	IOMUX_PAD(0x564, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS2__DRAM_SDQS2	IOMUX_PAD(0x568, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_RESET__DRAM_RESET	IOMUX_PAD(0x56C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCLK1__DRAM_SDCLK1	IOMUX_PAD(0x570, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_CAS__DRAM_CAS		IOMUX_PAD(0x574, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCLK0__DRAM_SDCLK0	IOMUX_PAD(0x578, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS0__DRAM_SDQS0	IOMUX_PAD(0x57C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDODT0__DRAM_SDODT0	IOMUX_PAD(0x580, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM0__DRAM_DQM0	IOMUX_PAD(0x584, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_RAS__DRAM_RAS		IOMUX_PAD(0x588, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDCKE0__DRAM_SDCKE0	IOMUX_PAD(0x58C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_SDQS1__DRAM_SDQS1	IOMUX_PAD(0x590, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_DRAM_DQM1__DRAM_DQM1	IOMUX_PAD(0x594, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_PMIC_ON_REQ__PMIC_ON_REQ	IOMUX_PAD(0x598, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ	IOMUX_PAD(0x59C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CLE__GPIO_6_7		IOMUX_PAD(0x5A0, 0x228,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_ALE__GPIO_6_8	IOMUX_PAD(0x5A4, 0x22C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_WP_B__GPIO_6_9	IOMUX_PAD(0x5A8, 0x230,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_RB0__GPIO_6_10	IOMUX_PAD(0x5AC, 0x234,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS0__GPIO_6_11	IOMUX_PAD(0x5B0, 0x238,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS1__GPIO_6_14	IOMUX_PAD(0x5B4, 0x23C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS2__GPIO_6_15	IOMUX_PAD(0x5B8, 0x240,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NANDF_CS3__GPIO_6_16	IOMUX_PAD(0x5BC, 0x244,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_NANDF__NVCC_NANDF	IOMUX_PAD(0x5C0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDIO__GPIO_1_22		IOMUX_PAD(0x5C4, 0x248,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_REF_CLK__GPIO_1_23	IOMUX_PAD(0x5C8, 0x24C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RX_ER__GPIO_1_24	IOMUX_PAD(0x5CC, 0x250,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_CRS_DV__GPIO_1_25	IOMUX_PAD(0x5D0, 0x254,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD1__GPIO_1_26		IOMUX_PAD(0x5D4, 0x258,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_RXD0__GPIO_1_27		IOMUX_PAD(0x5D8, 0x25C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TX_EN__GPIO_1_28	IOMUX_PAD(0x5DC, 0x260,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD1__GPIO_1_29		IOMUX_PAD(0x5E0, 0x264,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_TXD0__GPIO_1_30		IOMUX_PAD(0x5E4, 0x268,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_FEC_MDC__GPIO_1_31		IOMUX_PAD(0x5E8, 0x26C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_FEC__NVCC_FEC		IOMUX_PAD(0x5EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DIOW__GPIO_6_17	IOMUX_PAD(0x5F0, 0x270,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DMACK__GPIO_6_18	IOMUX_PAD(0x5F4, 0x274,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DMARQ__GPIO_7_0	IOMUX_PAD(0x5F8, 0x278,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_BUFFER_EN__GPIO_7_1	IOMUX_PAD(0x5FC, 0x27C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_INTRQ__GPIO_7_2		IOMUX_PAD(0x600, 0x280,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DIOR__GPIO_7_3		IOMUX_PAD(0x604, 0x284,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_RESET_B__GPIO_7_4	IOMUX_PAD(0x608, 0x288,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_IORDY__GPIO_7_5		IOMUX_PAD(0x60C, 0x28C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DA_0__GPIO_7_6		IOMUX_PAD(0x610, 0x290,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DA_1__GPIO_7_7		IOMUX_PAD(0x614, 0x294,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DA_2__GPIO_7_8		IOMUX_PAD(0x618, 0x298,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_CS_0__GPIO_7_9		IOMUX_PAD(0x61C, 0x29C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_CS_1__GPIO_7_10		IOMUX_PAD(0x620, 0x2A0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_ATA2__NVCC_ATA2	IOMUX_PAD(0x624, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA0__GPIO_2_0	IOMUX_PAD(0x628, 0x2A4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA1__GPIO_2_1	IOMUX_PAD(0x62C, 0x2A8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA2__GPIO_2_2	IOMUX_PAD(0x630, 0x2AC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA3__GPIO_2_3	IOMUX_PAD(0x634, 0x2B0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA4__GPIO_2_4	IOMUX_PAD(0x638, 0x2B4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA5__GPIO_2_5	IOMUX_PAD(0x63C, 0x2B8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA6__GPIO_2_6	IOMUX_PAD(0x640, 0x2BC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA7__GPIO_2_7	IOMUX_PAD(0x644, 0x2C0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA8__GPIO_2_8	IOMUX_PAD(0x648, 0x2C4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA9__GPIO_2_9	IOMUX_PAD(0x64C, 0x2C8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA10__GPIO_2_10	IOMUX_PAD(0x650, 0x2CC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA11__GPIO_2_11	IOMUX_PAD(0x654, 0x2D0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA12__GPIO_2_12	IOMUX_PAD(0x658, 0x2D4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA13__GPIO_2_13	IOMUX_PAD(0x65C, 0x2D8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA14__GPIO_2_14	IOMUX_PAD(0x660, 0x2DC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_ATA_DATA15__GPIO_2_15	IOMUX_PAD(0x664, 0x2E0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_ATA0__NVCC_ATA0	IOMUX_PAD(0x668, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA0__GPIO_1_16	IOMUX_PAD(0x66C, 0x2E4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA1__GPIO_1_17	IOMUX_PAD(0x670, 0x2E8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CMD__GPIO_1_18		IOMUX_PAD(0x674, 0x2EC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA2__GPIO_1_19	IOMUX_PAD(0x678, 0x2F0,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_CLK__GPIO_1_20		IOMUX_PAD(0x67C, 0x2F4,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD1_DATA3__GPIO_1_21	IOMUX_PAD(0x680, 0x2F8,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_SD1__NVCC_SD1		IOMUX_PAD(0x684, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CLK__GPIO_1_10		IOMUX_PAD(0x688, 0x2FC,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_CMD__GPIO_1_11		IOMUX_PAD(0x68C, 0x300,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA3__GPIO_1_12	IOMUX_PAD(0x690, 0x304,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA2__GPIO_1_13	IOMUX_PAD(0x694, 0x308,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA1__GPIO_1_14	IOMUX_PAD(0x698, 0x30C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_SD2_DATA0__GPIO_1_15	IOMUX_PAD(0x69C, 0x310,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_SD2__NVCC_SD2		IOMUX_PAD(0x6A0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_0__GPIO_1_0		IOMUX_PAD(0x6A4, 0x314,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_1__GPIO_1_1		IOMUX_PAD(0x6A8, 0x318,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_9__GPIO_1_9		IOMUX_PAD(0x6AC, 0x31C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_3__GPIO_1_3		IOMUX_PAD(0x6B0, 0x320,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_6__GPIO_1_6		IOMUX_PAD(0x6B4, 0x324,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_2__GPIO_1_2		IOMUX_PAD(0x6B8, 0x328,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_4__GPIO_1_4		IOMUX_PAD(0x6BC, 0x32C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_5__GPIO_1_5		IOMUX_PAD(0x6C0, 0x330,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_7__GPIO_1_7		IOMUX_PAD(0x6C4, 0x334,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__GPIO_1_8		IOMUX_PAD(0x6C8, 0x338,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_16__GPIO_7_11		IOMUX_PAD(0x6CC, 0x33C,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_17__GPIO_7_12		IOMUX_PAD(0x6D0, 0x340,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_18__GPIO_7_13		IOMUX_PAD(0x6D4, 0x344,IOMUX_CONFIG_ALT1, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_NVCC_GPIO__NVCC_GPIO	IOMUX_PAD(0x6D8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_POR_B__POR_B			IOMUX_PAD(0x6DC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_BOOT_MODE1__BOOT_MODE1	IOMUX_PAD(0x6E0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_RESET_IN_B__RESET_IN_B	IOMUX_PAD(0x6E4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_BOOT_MODE0__BOOT_MODE0	IOMUX_PAD(0x6E8, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_TEST_MODE__TEST_MODE	IOMUX_PAD(0x6EC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_ADDDS__GRP_ADDDS	IOMUX_PAD(0x6F0, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRMODE_CTL__GRP_DDRMODE_CTL	IOMUX_PAD(0x6F4, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRPKE__GRP_DDRPKE	IOMUX_PAD(0x6FC, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRPK__GRP_DDRPK	IOMUX_PAD(0x708, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_TERM_CTL3__GRP_TERM_CTL3	IOMUX_PAD(0x70C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRHYS__GRP_DDRHYS	IOMUX_PAD(0x710, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDRMODE__GRP_DDRMODE	IOMUX_PAD(0x714, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B0DS__GRP_B0DS		IOMUX_PAD(0x718, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B1DS__GRP_B1DS		IOMUX_PAD(0x71C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_CTLDS__GRP_CTLDS	IOMUX_PAD(0x720, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_DDR_TYPE__GRP_DDR_TYPE	IOMUX_PAD(0x724, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B2DS__GRP_B2DS		IOMUX_PAD(0x728, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+#define MX53_PAD_GRP_B3DS__GRP_B3DS		IOMUX_PAD(0x72C, NON_MUX_I, IOMUX_CONFIG_ALT0, 0x0, 0, NO_PAD_CTRL)
+
+#endif	/* __MACH_IOMUX_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 0880a4a1aed..2277b01c855 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -42,28 +42,44 @@
  * If <padname> or <padmode> refers to a GPIO, it is named
  * GPIO_<unit>_<num>
  *
- */
-
-struct pad_desc {
-	unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
-	unsigned mux_mode:8;
-	unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
-#define	NO_PAD_CTRL	(1 << 16)
-	unsigned pad_ctrl:17;
-	unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
-	unsigned select_input:3;
-};
-
-#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
-		_select_input, _pad_ctrl)				\
-		{							\
-			.mux_ctrl_ofs     = _mux_ctrl_ofs,		\
-			.mux_mode         = _mux_mode,			\
-			.pad_ctrl_ofs     = _pad_ctrl_ofs,		\
-			.pad_ctrl         = _pad_ctrl,			\
-			.select_input_ofs = _select_input_ofs,		\
-			.select_input     = _select_input,		\
-		}
+ * IOMUX/PAD Bit field definitions
+ *
+ * MUX_CTRL_OFS:	    0..11 (12)
+ * PAD_CTRL_OFS:	   12..23 (12)
+ * SEL_INPUT_OFS:	   24..35 (12)
+ * MUX_MODE + SION:	   36..40  (5)
+ * PAD_CTRL + NO_PAD_CTRL: 41..57 (17)
+ * SEL_INP:		   58..61  (4)
+ * reserved:		     63    (1)
+*/
+
+typedef u64 iomux_v3_cfg_t;
+
+#define MUX_CTRL_OFS_SHIFT	0
+#define MUX_CTRL_OFS_MASK	((iomux_v3_cfg_t)0xfff << MUX_CTRL_OFS_SHIFT)
+#define MUX_PAD_CTRL_OFS_SHIFT	12
+#define MUX_PAD_CTRL_OFS_MASK	((iomux_v3_cfg_t)0xfff << MUX_PAD_CTRL_OFS_SHIFT)
+#define MUX_SEL_INPUT_OFS_SHIFT	24
+#define MUX_SEL_INPUT_OFS_MASK	((iomux_v3_cfg_t)0xfff << MUX_SEL_INPUT_OFS_SHIFT)
+
+#define MUX_MODE_SHIFT		36
+#define MUX_MODE_MASK		((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
+#define MUX_PAD_CTRL_SHIFT	41
+#define MUX_PAD_CTRL_MASK	((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
+#define NO_PAD_CTRL		((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16))
+#define MUX_SEL_INPUT_SHIFT	58
+#define MUX_SEL_INPUT_MASK	((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
+
+#define MUX_PAD_CTRL(x)		((iomux_v3_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _sel_input_ofs, \
+		_sel_input, _pad_ctrl)					\
+	(((iomux_v3_cfg_t)(_mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT) |	\
+		((iomux_v3_cfg_t)(_mux_mode) << MUX_MODE_SHIFT) |	\
+		((iomux_v3_cfg_t)(_pad_ctrl_ofs) << MUX_PAD_CTRL_OFS_SHIFT) | \
+		((iomux_v3_cfg_t)(_pad_ctrl) << MUX_PAD_CTRL_SHIFT) |	\
+		((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
+		((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
 
 /*
  * Use to set PAD control
@@ -107,13 +123,13 @@ struct pad_desc {
 /*
  * setups a single pad in the iomuxer
  */
-int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
 
 /*
  * setups mutliple pads
  * convenient way to call the above function with tables
  */
-int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
 
 /*
  * Initialise the iomux controller
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 86781f7b0c0..58a49cc8379 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -23,13 +23,17 @@
 #define MXC_GPIO_IRQ_START	MXC_INTERNAL_IRQS
 
 /* these are ordered by size to support multi-SoC kernels */
-#if defined CONFIG_ARCH_MX2
+#if defined CONFIG_ARCH_MX53
+#define MXC_GPIO_IRQS		(32 * 7)
+#elif defined CONFIG_ARCH_MX2
+#define MXC_GPIO_IRQS		(32 * 6)
+#elif defined CONFIG_ARCH_MX50
 #define MXC_GPIO_IRQS		(32 * 6)
 #elif defined CONFIG_ARCH_MX1
 #define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MX25
 #define MXC_GPIO_IRQS		(32 * 4)
-#elif defined CONFIG_ARCH_MX5
+#elif defined CONFIG_ARCH_MX51
 #define MXC_GPIO_IRQS		(32 * 4)
 #elif defined CONFIG_ARCH_MXC91231
 #define MXC_GPIO_IRQS		(32 * 4)
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
index 564ec9dbc93..83861408133 100644
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -16,7 +16,9 @@
 #define MX25_PHYS_OFFSET	UL(0x80000000)
 #define MX27_PHYS_OFFSET	UL(0xa0000000)
 #define MX3x_PHYS_OFFSET	UL(0x80000000)
+#define MX50_PHYS_OFFSET	UL(0x70000000)
 #define MX51_PHYS_OFFSET	UL(0x90000000)
+#define MX53_PHYS_OFFSET	UL(0x70000000)
 #define MXC91231_PHYS_OFFSET	UL(0x90000000)
 
 #if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
@@ -32,8 +34,12 @@
 #  define PHYS_OFFSET		MX3x_PHYS_OFFSET
 # elif defined CONFIG_ARCH_MXC91231
 #  define PHYS_OFFSET		MXC91231_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX5
+# elif defined CONFIG_ARCH_MX50
+#  define PHYS_OFFSET		MX50_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX51
 #  define PHYS_OFFSET		MX51_PHYS_OFFSET
+# elif defined CONFIG_ARCH_MX53
+#  define PHYS_OFFSET		MX53_PHYS_OFFSET
 # endif
 #endif
 
diff --git a/arch/arm/plat-mxc/include/mach/mx1.h b/arch/arm/plat-mxc/include/mach/mx1.h
index 641b2461823..75d96214b83 100644
--- a/arch/arm/plat-mxc/include/mach/mx1.h
+++ b/arch/arm/plat-mxc/include/mach/mx1.h
@@ -19,7 +19,6 @@
  */
 #define MX1_IO_BASE_ADDR	0x00200000
 #define MX1_IO_SIZE		SZ_1M
-#define MX1_IO_BASE_ADDR_VIRT	VMALLOC_END
 
 #define MX1_CS0_PHYS		0x10000000
 #define MX1_CS0_SIZE		0x02000000
@@ -66,6 +65,10 @@
 #define MX1_CCM_BASE_ADDR		(0x1B000 + MX1_IO_BASE_ADDR)
 #define MX1_SCM_BASE_ADDR		(0x1B804 + MX1_IO_BASE_ADDR)
 #define MX1_GPIO_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO1_BASE_ADDR		(0x1C000 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO2_BASE_ADDR		(0x1C100 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO3_BASE_ADDR		(0x1C200 + MX1_IO_BASE_ADDR)
+#define MX1_GPIO4_BASE_ADDR		(0x1C300 + MX1_IO_BASE_ADDR)
 #define MX1_EIM_BASE_ADDR		(0x20000 + MX1_IO_BASE_ADDR)
 #define MX1_SDRAMC_BASE_ADDR		(0x21000 + MX1_IO_BASE_ADDR)
 #define MX1_MMA_BASE_ADDR		(0x22000 + MX1_IO_BASE_ADDR)
@@ -73,12 +76,12 @@
 #define MX1_CSI_BASE_ADDR		(0x24000 + MX1_IO_BASE_ADDR)
 
 /* macro to get at IO space when running virtually */
-#define MX1_IO_ADDRESS(x) (						\
-	IMX_IO_ADDRESS(x, MX1_IO))
+#define MX1_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX1_IO_ADDRESS(x)		IOMEM(MX1_IO_P2V(x))
 
 /* fixed interrput numbers */
 #define MX1_INT_SOFTINT		0
-#define MX1_CSI_INT		6
+#define MX1_INT_CSI		6
 #define MX1_DSPA_MAC_INT	7
 #define MX1_DSPA_INT		8
 #define MX1_COMP_INT		9
@@ -115,13 +118,13 @@
 #define MX1_SSI_RX_INT		44
 #define MX1_SSI_RX_ERR_INT	45
 #define MX1_TOUCH_INT		46
-#define MX1_USBD_INT0		47
-#define MX1_USBD_INT1		48
-#define MX1_USBD_INT2		49
-#define MX1_USBD_INT3		50
-#define MX1_USBD_INT4		51
-#define MX1_USBD_INT5		52
-#define MX1_USBD_INT6		53
+#define MX1_INT_USBD0		47
+#define MX1_INT_USBD1		48
+#define MX1_INT_USBD2		49
+#define MX1_INT_USBD3		50
+#define MX1_INT_USBD4		51
+#define MX1_INT_USBD5		52
+#define MX1_INT_USBD6		53
 #define MX1_BTSYS_INT		55
 #define MX1_BTTIM_INT		56
 #define MX1_BTWUI_INT		57
@@ -164,134 +167,6 @@
  * to not break drivers/usb/gadget/imx_udc.  Should go
  * away after this driver uses the new name.
  */
-#define USBD_INT0		MX1_USBD_INT0
-
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define IMX_IO_PHYS MX1_IO_BASE_ADDR
-#define IMX_IO_SIZE MX1_IO_SIZE
-#define IMX_IO_BASE MX1_IO_BASE_ADDR_VIRT
-#define IMX_CS0_PHYS MX1_CS0_PHYS
-#define IMX_CS0_SIZE MX1_CS0_SIZE
-#define IMX_CS1_PHYS MX1_CS1_PHYS
-#define IMX_CS1_SIZE MX1_CS1_SIZE
-#define IMX_CS2_PHYS MX1_CS2_PHYS
-#define IMX_CS2_SIZE MX1_CS2_SIZE
-#define IMX_CS3_PHYS MX1_CS3_PHYS
-#define IMX_CS3_SIZE MX1_CS3_SIZE
-#define IMX_CS4_PHYS MX1_CS4_PHYS
-#define IMX_CS4_SIZE MX1_CS4_SIZE
-#define IMX_CS5_PHYS MX1_CS5_PHYS
-#define IMX_CS5_SIZE MX1_CS5_SIZE
-#define AIPI1_BASE_ADDR MX1_AIPI1_BASE_ADDR
-#define WDT_BASE_ADDR MX1_WDT_BASE_ADDR
-#define TIM1_BASE_ADDR MX1_TIM1_BASE_ADDR
-#define TIM2_BASE_ADDR MX1_TIM2_BASE_ADDR
-#define RTC_BASE_ADDR MX1_RTC_BASE_ADDR
-#define LCDC_BASE_ADDR MX1_LCDC_BASE_ADDR
-#define UART1_BASE_ADDR MX1_UART1_BASE_ADDR
-#define UART2_BASE_ADDR MX1_UART2_BASE_ADDR
-#define PWM_BASE_ADDR MX1_PWM_BASE_ADDR
-#define DMA_BASE_ADDR MX1_DMA_BASE_ADDR
-#define AIPI2_BASE_ADDR MX1_AIPI2_BASE_ADDR
-#define SIM_BASE_ADDR MX1_SIM_BASE_ADDR
-#define USBD_BASE_ADDR MX1_USBD_BASE_ADDR
-#define SPI1_BASE_ADDR MX1_SPI1_BASE_ADDR
-#define MMC_BASE_ADDR MX1_MMC_BASE_ADDR
-#define ASP_BASE_ADDR MX1_ASP_BASE_ADDR
-#define BTA_BASE_ADDR MX1_BTA_BASE_ADDR
-#define I2C_BASE_ADDR MX1_I2C_BASE_ADDR
-#define SSI_BASE_ADDR MX1_SSI_BASE_ADDR
-#define SPI2_BASE_ADDR MX1_SPI2_BASE_ADDR
-#define MSHC_BASE_ADDR MX1_MSHC_BASE_ADDR
-#define CCM_BASE_ADDR MX1_CCM_BASE_ADDR
-#define SCM_BASE_ADDR MX1_SCM_BASE_ADDR
-#define GPIO_BASE_ADDR MX1_GPIO_BASE_ADDR
-#define EIM_BASE_ADDR MX1_EIM_BASE_ADDR
-#define SDRAMC_BASE_ADDR MX1_SDRAMC_BASE_ADDR
-#define MMA_BASE_ADDR MX1_MMA_BASE_ADDR
-#define AVIC_BASE_ADDR MX1_AVIC_BASE_ADDR
-#define CSI_BASE_ADDR MX1_CSI_BASE_ADDR
-#define IO_ADDRESS(x) MX1_IO_ADDRESS(x)
-#define AVIC_IO_ADDRESS(x) IO_ADDRESS(x)
-#define INT_SOFTINT MX1_INT_SOFTINT
-#define CSI_INT MX1_CSI_INT
-#define DSPA_MAC_INT MX1_DSPA_MAC_INT
-#define DSPA_INT MX1_DSPA_INT
-#define COMP_INT MX1_COMP_INT
-#define MSHC_XINT MX1_MSHC_XINT
-#define GPIO_INT_PORTA MX1_GPIO_INT_PORTA
-#define GPIO_INT_PORTB MX1_GPIO_INT_PORTB
-#define GPIO_INT_PORTC MX1_GPIO_INT_PORTC
-#define LCDC_INT MX1_LCDC_INT
-#define SIM_INT MX1_SIM_INT
-#define SIM_DATA_INT MX1_SIM_DATA_INT
-#define RTC_INT MX1_RTC_INT
-#define RTC_SAMINT MX1_RTC_SAMINT
-#define UART2_MINT_PFERR MX1_UART2_MINT_PFERR
-#define UART2_MINT_RTS MX1_UART2_MINT_RTS
-#define UART2_MINT_DTR MX1_UART2_MINT_DTR
-#define UART2_MINT_UARTC MX1_UART2_MINT_UARTC
-#define UART2_MINT_TX MX1_UART2_MINT_TX
-#define UART2_MINT_RX MX1_UART2_MINT_RX
-#define UART1_MINT_PFERR MX1_UART1_MINT_PFERR
-#define UART1_MINT_RTS MX1_UART1_MINT_RTS
-#define UART1_MINT_DTR MX1_UART1_MINT_DTR
-#define UART1_MINT_UARTC MX1_UART1_MINT_UARTC
-#define UART1_MINT_TX MX1_UART1_MINT_TX
-#define UART1_MINT_RX MX1_UART1_MINT_RX
-#define VOICE_DAC_INT MX1_VOICE_DAC_INT
-#define VOICE_ADC_INT MX1_VOICE_ADC_INT
-#define PEN_DATA_INT MX1_PEN_DATA_INT
-#define PWM_INT MX1_PWM_INT
-#define SDHC_INT MX1_SDHC_INT
-#define I2C_INT MX1_INT_I2C
-#define CSPI_INT MX1_CSPI_INT
-#define SSI_TX_INT MX1_SSI_TX_INT
-#define SSI_TX_ERR_INT MX1_SSI_TX_ERR_INT
-#define SSI_RX_INT MX1_SSI_RX_INT
-#define SSI_RX_ERR_INT MX1_SSI_RX_ERR_INT
-#define TOUCH_INT MX1_TOUCH_INT
-#define USBD_INT1 MX1_USBD_INT1
-#define USBD_INT2 MX1_USBD_INT2
-#define USBD_INT3 MX1_USBD_INT3
-#define USBD_INT4 MX1_USBD_INT4
-#define USBD_INT5 MX1_USBD_INT5
-#define USBD_INT6 MX1_USBD_INT6
-#define BTSYS_INT MX1_BTSYS_INT
-#define BTTIM_INT MX1_BTTIM_INT
-#define BTWUI_INT MX1_BTWUI_INT
-#define TIM2_INT MX1_TIM2_INT
-#define TIM1_INT MX1_TIM1_INT
-#define DMA_ERR MX1_DMA_ERR
-#define DMA_INT MX1_DMA_INT
-#define GPIO_INT_PORTD MX1_GPIO_INT_PORTD
-#define WDT_INT MX1_WDT_INT
-#define DMA_REQ_UART3_T MX1_DMA_REQ_UART3_T
-#define DMA_REQ_UART3_R MX1_DMA_REQ_UART3_R
-#define DMA_REQ_SSI2_T MX1_DMA_REQ_SSI2_T
-#define DMA_REQ_SSI2_R MX1_DMA_REQ_SSI2_R
-#define DMA_REQ_CSI_STAT MX1_DMA_REQ_CSI_STAT
-#define DMA_REQ_CSI_R MX1_DMA_REQ_CSI_R
-#define DMA_REQ_MSHC MX1_DMA_REQ_MSHC
-#define DMA_REQ_DSPA_DCT_DOUT MX1_DMA_REQ_DSPA_DCT_DOUT
-#define DMA_REQ_DSPA_DCT_DIN MX1_DMA_REQ_DSPA_DCT_DIN
-#define DMA_REQ_DSPA_MAC MX1_DMA_REQ_DSPA_MAC
-#define DMA_REQ_EXT MX1_DMA_REQ_EXT
-#define DMA_REQ_SDHC MX1_DMA_REQ_SDHC
-#define DMA_REQ_SPI1_R MX1_DMA_REQ_SPI1_R
-#define DMA_REQ_SPI1_T MX1_DMA_REQ_SPI1_T
-#define DMA_REQ_SSI_T MX1_DMA_REQ_SSI_T
-#define DMA_REQ_SSI_R MX1_DMA_REQ_SSI_R
-#define DMA_REQ_ASP_DAC MX1_DMA_REQ_ASP_DAC
-#define DMA_REQ_ASP_ADC MX1_DMA_REQ_ASP_ADC
-#define DMA_REQ_USP_EP(x) MX1_DMA_REQ_USP_EP(x)
-#define DMA_REQ_SPI2_R MX1_DMA_REQ_SPI2_R
-#define DMA_REQ_SPI2_T MX1_DMA_REQ_SPI2_T
-#define DMA_REQ_UART2_T MX1_DMA_REQ_UART2_T
-#define DMA_REQ_UART2_R MX1_DMA_REQ_UART2_R
-#define DMA_REQ_UART1_T MX1_DMA_REQ_UART1_T
-#define DMA_REQ_UART1_R MX1_DMA_REQ_UART1_R
-#endif /* ifdef IMX_NEEDS_DEPRECATED_SYMBOLS */
+#define USBD_INT0		MX1_INT_USBD0
 
 #endif /* ifndef __MACH_MX1_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 8bc59720b6e..6cd049ebbd8 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -26,7 +26,6 @@
 #define __MACH_MX21_H__
 
 #define MX21_AIPI_BASE_ADDR		0x10000000
-#define MX21_AIPI_BASE_ADDR_VIRT	0xf4000000
 #define MX21_AIPI_SIZE			SZ_1M
 #define MX21_DMA_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x01000)
 #define MX21_WDOG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x02000)
@@ -49,6 +48,12 @@
 #define MX21_SDHC1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x13000)
 #define MX21_SDHC2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x14000)
 #define MX21_GPIO_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x15000)
+#define MX21_GPIO1_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x000)
+#define MX21_GPIO2_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x100)
+#define MX21_GPIO3_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x200)
+#define MX21_GPIO4_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x300)
+#define MX21_GPIO5_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x400)
+#define MX21_GPIO6_BASE_ADDR			(MX21_GPIO_BASE_ADDR + 0x500)
 #define MX21_AUDMUX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x16000)
 #define MX21_CSPI3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x17000)
 #define MX21_LCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x21000)
@@ -64,7 +69,6 @@
 #define MX21_AVIC_BASE_ADDR		0x10040000
 
 #define MX21_SAHB1_BASE_ADDR		0x80000000
-#define MX21_SAHB1_BASE_ADDR_VIRT	0xf4100000
 #define MX21_SAHB1_SIZE			SZ_1M
 #define MX21_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
 
@@ -82,7 +86,6 @@
 
 /* NAND, SDRAM, WEIM etc controllers */
 #define MX21_X_MEMC_BASE_ADDR		0xdf000000
-#define MX21_X_MEMC_BASE_ADDR_VIRT	0xf4200000
 #define MX21_X_MEMC_SIZE		SZ_256K
 
 #define MX21_SDRAMC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x0000)
@@ -92,10 +95,8 @@
 
 #define MX21_IRAM_BASE_ADDR		0xffffe800	/* internal ram */
 
-#define MX21_IO_ADDRESS(x) (						\
-	IMX_IO_ADDRESS(x, MX21_AIPI) ?:					\
-	IMX_IO_ADDRESS(x, MX21_SAHB1) ?:				\
-	IMX_IO_ADDRESS(x, MX21_X_MEMC))
+#define MX21_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX21_IO_ADDRESS(x)		IOMEM(MX21_IO_P2V(x))
 
 /* fixed interrupt numbers */
 #define MX21_INT_CSPI3		6
@@ -184,39 +185,4 @@
 #define MX21_DMA_REQ_CSI_STAT	30
 #define MX21_DMA_REQ_CSI_RX	31
 
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
-#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
-#define CS0_BASE_ADDR MX21_CS0_BASE_ADDR
-#define CS1_BASE_ADDR MX21_CS1_BASE_ADDR
-#define CS2_BASE_ADDR MX21_CS2_BASE_ADDR
-#define CS3_BASE_ADDR MX21_CS3_BASE_ADDR
-#define CS4_BASE_ADDR MX21_CS4_BASE_ADDR
-#define PCMCIA_MEM_BASE_ADDR MX21_PCMCIA_MEM_BASE_ADDR
-#define CS5_BASE_ADDR MX21_CS5_BASE_ADDR
-#define X_MEMC_BASE_ADDR MX21_X_MEMC_BASE_ADDR
-#define X_MEMC_BASE_ADDR_VIRT MX21_X_MEMC_BASE_ADDR_VIRT
-#define X_MEMC_SIZE MX21_X_MEMC_SIZE
-#define SDRAMC_BASE_ADDR MX21_SDRAMC_BASE_ADDR
-#define EIM_BASE_ADDR MX21_EIM_BASE_ADDR
-#define PCMCIA_CTL_BASE_ADDR MX21_PCMCIA_CTL_BASE_ADDR
-#define NFC_BASE_ADDR MX21_NFC_BASE_ADDR
-#define IRAM_BASE_ADDR MX21_IRAM_BASE_ADDR
-#define MXC_INT_FIRI MX21_INT_FIRI
-#define MXC_INT_BMI MX21_INT_BMI
-#define MXC_INT_EMMAENC MX21_INT_EMMAENC
-#define MXC_INT_EMMADEC MX21_INT_EMMADEC
-#define MXC_INT_USBWKUP MX21_INT_USBWKUP
-#define MXC_INT_USBDMA MX21_INT_USBDMA
-#define MXC_INT_USBHOST MX21_INT_USBHOST
-#define MXC_INT_USBFUNC MX21_INT_USBFUNC
-#define MXC_INT_USBMNP MX21_INT_USBMNP
-#define MXC_INT_USBCTRL MX21_INT_USBCTRL
-#define MXC_INT_USBCTRL MX21_INT_USBCTRL
-#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
-#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
-#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
-#endif
-
 #endif /* ifndef __MACH_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index cf46a45b0d4..087cd7ac8d5 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -2,13 +2,10 @@
 #define __MACH_MX25_H__
 
 #define MX25_AIPS1_BASE_ADDR		0x43f00000
-#define MX25_AIPS1_BASE_ADDR_VIRT	0xfc000000
 #define MX25_AIPS1_SIZE			SZ_1M
 #define MX25_AIPS2_BASE_ADDR		0x53f00000
-#define MX25_AIPS2_BASE_ADDR_VIRT	0xfc200000
 #define MX25_AIPS2_SIZE			SZ_1M
 #define MX25_AVIC_BASE_ADDR		0x68000000
-#define MX25_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX25_AVIC_SIZE			SZ_1M
 
 #define MX25_I2C1_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0x80000)
@@ -21,20 +18,15 @@
 
 #define MX25_CRM_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x80000)
 #define MX25_GPT1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x90000)
+#define MX25_GPIO4_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0x9c000)
+#define MX25_PWM2_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xa0000)
+#define MX25_GPIO3_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xa4000)
+#define MX25_PWM3_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xa8000)
+#define MX25_PWM4_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xc8000)
+#define MX25_GPIO1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xcc000)
+#define MX25_GPIO2_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xd0000)
 #define MX25_WDOG_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xdc000)
-
-#define MX25_GPIO1_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xcc000)
-#define MX25_GPIO2_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xd0000)
-#define MX25_GPIO3_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
-#define MX25_GPIO4_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
-
-#define MX25_IO_ADDRESS(x) (					\
-	IMX_IO_ADDRESS(x, MX25_AIPS1) ?:			\
-	IMX_IO_ADDRESS(x, MX25_AIPS2) ?:			\
-	IMX_IO_ADDRESS(x, MX25_AVIC))
-
-#define MX25_AIPS1_IO_ADDRESS(x) \
-	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
+#define MX25_PWM1_BASE_ADDR		(MX25_AIPS2_BASE_ADDR + 0xe0000)
 
 #define MX25_UART1_BASE_ADDR		0x43f90000
 #define MX25_UART2_BASE_ADDR		0x43f94000
@@ -55,9 +47,19 @@
 #define MX25_LCDC_BASE_ADDR		0x53fbc000
 #define MX25_KPP_BASE_ADDR		0x43fa8000
 #define MX25_SDMA_BASE_ADDR		0x53fd4000
-#define MX25_OTG_BASE_ADDR		0x53ff4000
+#define MX25_USB_BASE_ADDR		0x53ff4000
+#define MX25_USB_OTG_BASE_ADDR			(MX25_USB_BASE_ADDR + 0x0000)
+/*
+ * The reference manual (IMX25RM, Rev. 1, 06/2009) specifies an offset of 0x200
+ * for the host controller.  Early documentation drafts specified 0x400 and
+ * Freescale internal sources confirm only the latter value to work.
+ */
+#define MX25_USB_HS_BASE_ADDR			(MX25_USB_BASE_ADDR + 0x0400)
 #define MX25_CSI_BASE_ADDR		0x53ff8000
 
+#define MX25_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX25_IO_ADDRESS(x)		IOMEM(MX25_IO_P2V(x))
+
 #define MX25_INT_CSPI3		0
 #define MX25_INT_I2C1		3
 #define MX25_INT_I2C2		4
@@ -69,18 +71,28 @@
 #define MX25_INT_SSI1		12
 #define MX25_INT_CSPI2		13
 #define MX25_INT_CSPI1		14
+#define MX25_INT_GPIO3		16
 #define MX25_INT_CSI		17
 #define MX25_INT_UART3		18
+#define MX25_INT_GPIO4		23
 #define MX25_INT_KPP		24
 #define MX25_INT_DRYICE		25
+#define MX25_INT_PWM1		26
 #define MX25_INT_UART2		32
 #define MX25_INT_NFC		33
 #define MX25_INT_SDMA		34
+#define MX25_INT_USB_HS		35
+#define MX25_INT_PWM2		36
+#define MX25_INT_USB_OTG	37
 #define MX25_INT_LCDC		39
 #define MX25_INT_UART5		40
+#define MX25_INT_PWM3		41
+#define MX25_INT_PWM4		42
 #define MX25_INT_CAN1		43
 #define MX25_INT_CAN2		44
 #define MX25_INT_UART1		45
+#define MX25_INT_GPIO2		51
+#define MX25_INT_GPIO1		52
 #define MX25_INT_FEC		57
 
 #define MX25_DMA_REQ_SSI2_RX1	22
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index 2237ba2e535..cbc43ad5ef4 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -29,7 +29,6 @@
 #endif
 
 #define MX27_AIPI_BASE_ADDR		0x10000000
-#define MX27_AIPI_BASE_ADDR_VIRT	0xf4000000
 #define MX27_AIPI_SIZE			SZ_1M
 #define MX27_DMA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x01000)
 #define MX27_WDOG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x02000)
@@ -52,6 +51,12 @@
 #define MX27_SDHC1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x13000)
 #define MX27_SDHC2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x14000)
 #define MX27_GPIO_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x15000)
+#define MX27_GPIO1_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x000)
+#define MX27_GPIO2_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x100)
+#define MX27_GPIO3_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x200)
+#define MX27_GPIO4_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x300)
+#define MX27_GPIO5_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x400)
+#define MX27_GPIO6_BASE_ADDR			(MX27_GPIO_BASE_ADDR + 0x500)
 #define MX27_AUDMUX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x16000)
 #define MX27_CSPI3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x17000)
 #define MX27_MSHC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x18000)
@@ -65,11 +70,13 @@
 #define MX27_LCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x21000)
 #define MX27_SLCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x22000)
 #define MX27_VPU_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x23000)
-#define MX27_USBOTG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x24000)
-#define MX27_OTG_BASE_ADDR			MX27_USBOTG_BASE_ADDR
+#define MX27_USB_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x24000)
+#define MX27_USB_OTG_BASE_ADDR			(MX27_USB_BASE_ADDR + 0x0000)
+#define MX27_USB_HS1_BASE_ADDR			(MX27_USB_BASE_ADDR + 0x0200)
+#define MX27_USB_HS2_BASE_ADDR			(MX27_USB_BASE_ADDR + 0x0400)
 #define MX27_SAHARA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x25000)
-#define MX27_EMMA_PP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26000)
-#define MX27_EMMA_PRP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26400)
+#define MX27_EMMAPP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26000)
+#define MX27_EMMAPRP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26400)
 #define MX27_CCM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27000)
 #define MX27_SYSCTRL_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27800)
 #define MX27_IIM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x28000)
@@ -87,7 +94,6 @@
 #define MX27_ROMP_BASE_ADDR		0x10041000
 
 #define MX27_SAHB1_BASE_ADDR		0x80000000
-#define MX27_SAHB1_BASE_ADDR_VIRT	0xf4100000
 #define MX27_SAHB1_SIZE			SZ_1M
 #define MX27_CSI_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x0000)
 #define MX27_ATA_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x1000)
@@ -105,7 +111,6 @@
 
 /* NAND, SDRAM, WEIM, M3IF, EMI controllers */
 #define MX27_X_MEMC_BASE_ADDR		0xd8000000
-#define MX27_X_MEMC_BASE_ADDR_VIRT	0xf4200000
 #define MX27_X_MEMC_SIZE		SZ_1M
 #define MX27_NFC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR)
 #define MX27_SDRAMC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x1000)
@@ -123,10 +128,8 @@
 /* IRAM */
 #define MX27_IRAM_BASE_ADDR		0xffff4c00	/* internal ram */
 
-#define MX27_IO_ADDRESS(x) (						\
-	IMX_IO_ADDRESS(x, MX27_AIPI) ?:					\
-	IMX_IO_ADDRESS(x, MX27_SAHB1) ?:				\
-	IMX_IO_ADDRESS(x, MX27_X_MEMC))
+#define MX27_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX27_IO_ADDRESS(x)		IOMEM(MX27_IO_P2V(x))
 
 #ifndef __ASSEMBLER__
 static inline void mx27_setup_weimcs(size_t cs,
@@ -192,9 +195,9 @@ static inline void mx27_setup_weimcs(size_t cs,
 #define MX27_INT_EMMAPRP	51
 #define MX27_INT_EMMAPP		52
 #define MX27_INT_VPU		53
-#define MX27_INT_USB1		54
-#define MX27_INT_USB2		55
-#define MX27_INT_USB3		56
+#define MX27_INT_USB_HS1	54
+#define MX27_INT_USB_HS2	55
+#define MX27_INT_USB_OTG	56
 #define MX27_INT_SCC_SMN	57
 #define MX27_INT_SCC_SCM	58
 #define MX27_INT_SAHARA		59
@@ -241,82 +244,8 @@ static inline void mx27_setup_weimcs(size_t cs,
 #define MX27_DMA_REQ_SDHC3	36
 #define MX27_DMA_REQ_NFC	37
 
-/* silicon revisions specific to i.MX27 */
-#define CHIP_REV_1_0		0x00
-#define CHIP_REV_2_0		0x01
-
 #ifndef __ASSEMBLY__
 extern int mx27_revision(void);
 #endif
 
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
-#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
-#define GPT4_BASE_ADDR MX27_GPT4_BASE_ADDR
-#define UART5_BASE_ADDR MX27_UART5_BASE_ADDR
-#define UART6_BASE_ADDR MX27_UART6_BASE_ADDR
-#define I2C2_BASE_ADDR MX27_I2C2_BASE_ADDR
-#define SDHC3_BASE_ADDR MX27_SDHC3_BASE_ADDR
-#define GPT6_BASE_ADDR MX27_GPT6_BASE_ADDR
-#define VPU_BASE_ADDR MX27_VPU_BASE_ADDR
-#define OTG_BASE_ADDR MX27_OTG_BASE_ADDR
-#define SAHARA_BASE_ADDR MX27_SAHARA_BASE_ADDR
-#define IIM_BASE_ADDR MX27_IIM_BASE_ADDR
-#define RTIC_BASE_ADDR MX27_RTIC_BASE_ADDR
-#define FEC_BASE_ADDR MX27_FEC_BASE_ADDR
-#define SCC_BASE_ADDR MX27_SCC_BASE_ADDR
-#define ETB_BASE_ADDR MX27_ETB_BASE_ADDR
-#define ETB_RAM_BASE_ADDR MX27_ETB_RAM_BASE_ADDR
-#define ROMP_BASE_ADDR MX27_ROMP_BASE_ADDR
-#define ATA_BASE_ADDR MX27_ATA_BASE_ADDR
-#define SDRAM_BASE_ADDR MX27_SDRAM_BASE_ADDR
-#define CSD1_BASE_ADDR MX27_CSD1_BASE_ADDR
-#define CS0_BASE_ADDR MX27_CS0_BASE_ADDR
-#define CS1_BASE_ADDR MX27_CS1_BASE_ADDR
-#define CS2_BASE_ADDR MX27_CS2_BASE_ADDR
-#define CS3_BASE_ADDR MX27_CS3_BASE_ADDR
-#define CS4_BASE_ADDR MX27_CS4_BASE_ADDR
-#define CS5_BASE_ADDR MX27_CS5_BASE_ADDR
-#define X_MEMC_BASE_ADDR MX27_X_MEMC_BASE_ADDR
-#define X_MEMC_BASE_ADDR_VIRT MX27_X_MEMC_BASE_ADDR_VIRT
-#define X_MEMC_SIZE MX27_X_MEMC_SIZE
-#define NFC_BASE_ADDR MX27_NFC_BASE_ADDR
-#define SDRAMC_BASE_ADDR MX27_SDRAMC_BASE_ADDR
-#define WEIM_BASE_ADDR MX27_WEIM_BASE_ADDR
-#define M3IF_BASE_ADDR MX27_M3IF_BASE_ADDR
-#define PCMCIA_CTL_BASE_ADDR MX27_PCMCIA_CTL_BASE_ADDR
-#define PCMCIA_MEM_BASE_ADDR MX27_PCMCIA_MEM_BASE_ADDR
-#define IRAM_BASE_ADDR MX27_IRAM_BASE_ADDR
-#define MXC_INT_I2C2 MX27_INT_I2C2
-#define MXC_INT_GPT6 MX27_INT_GPT6
-#define MXC_INT_GPT5 MX27_INT_GPT5
-#define MXC_INT_GPT4 MX27_INT_GPT4
-#define MXC_INT_RTIC MX27_INT_RTIC
-#define MXC_INT_SDHC MX27_INT_SDHC
-#define MXC_INT_SDHC3 MX27_INT_SDHC3
-#define MXC_INT_ATA MX27_INT_ATA
-#define MXC_INT_UART6 MX27_INT_UART6
-#define MXC_INT_UART5 MX27_INT_UART5
-#define MXC_INT_FEC MX27_INT_FEC
-#define MXC_INT_VPU MX27_INT_VPU
-#define MXC_INT_USB1 MX27_INT_USB1
-#define MXC_INT_USB2 MX27_INT_USB2
-#define MXC_INT_USB3 MX27_INT_USB3
-#define MXC_INT_SCC_SMN MX27_INT_SCC_SMN
-#define MXC_INT_SCC_SCM MX27_INT_SCC_SCM
-#define MXC_INT_SAHARA MX27_INT_SAHARA
-#define MXC_INT_IIM MX27_INT_IIM
-#define MXC_INT_CCM MX27_INT_CCM
-#define DMA_REQ_MSHC MX27_DMA_REQ_MSHC
-#define DMA_REQ_ATA_TX MX27_DMA_REQ_ATA_TX
-#define DMA_REQ_ATA_RCV MX27_DMA_REQ_ATA_RCV
-#define DMA_REQ_UART5_TX MX27_DMA_REQ_UART5_TX
-#define DMA_REQ_UART5_RX MX27_DMA_REQ_UART5_RX
-#define DMA_REQ_UART6_TX MX27_DMA_REQ_UART6_TX
-#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
-#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
-#define DMA_REQ_NFC MX27_DMA_REQ_NFC
-#endif
-
 #endif /* ifndef __MACH_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index afb895a0b5b..6d07839fdec 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -27,7 +27,6 @@
 
 /* Register offsets */
 #define MX2x_AIPI_BASE_ADDR		0x10000000
-#define MX2x_AIPI_BASE_ADDR_VIRT	0xf4000000
 #define MX2x_AIPI_SIZE			SZ_1M
 #define MX2x_DMA_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x01000)
 #define MX2x_WDOG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x02000)
@@ -65,43 +64,9 @@
 #define MX2x_AVIC_BASE_ADDR		0x10040000
 
 #define MX2x_SAHB1_BASE_ADDR		0x80000000
-#define MX2x_SAHB1_BASE_ADDR_VIRT	0xf4100000
 #define MX2x_SAHB1_SIZE			SZ_1M
 #define MX2x_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
 
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x)   \
-	(void __force __iomem *) \
-	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
-		AIPI_IO_ADDRESS(x) : \
-	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
-		SAHB1_IO_ADDRESS(x) : \
-	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
-		X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
-
-/* define the address mapping macros: in physical address order */
-#define AIPI_IO_ADDRESS(x)  \
-	(((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x)	AIPI_IO_ADDRESS(x)
-
-#define SAHB1_IO_ADDRESS(x)  \
-	(((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x)  \
-	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x)  \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
 /* fixed interrupt numbers */
 #define MX2x_INT_CSPI3		6
 #define MX2x_INT_GPIO		8
@@ -176,118 +141,4 @@
 #define MX2x_DMA_REQ_CSI_STAT	30
 #define MX2x_DMA_REQ_CSI_RX	31
 
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
-#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
-#define AIPI_SIZE MX2x_AIPI_SIZE
-#define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR
-#define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR
-#define GPT1_BASE_ADDR MX2x_GPT1_BASE_ADDR
-#define GPT2_BASE_ADDR MX2x_GPT2_BASE_ADDR
-#define GPT3_BASE_ADDR MX2x_GPT3_BASE_ADDR
-#define PWM_BASE_ADDR MX2x_PWM_BASE_ADDR
-#define RTC_BASE_ADDR MX2x_RTC_BASE_ADDR
-#define KPP_BASE_ADDR MX2x_KPP_BASE_ADDR
-#define OWIRE_BASE_ADDR MX2x_OWIRE_BASE_ADDR
-#define UART1_BASE_ADDR MX2x_UART1_BASE_ADDR
-#define UART2_BASE_ADDR MX2x_UART2_BASE_ADDR
-#define UART3_BASE_ADDR MX2x_UART3_BASE_ADDR
-#define UART4_BASE_ADDR MX2x_UART4_BASE_ADDR
-#define CSPI1_BASE_ADDR MX2x_CSPI1_BASE_ADDR
-#define CSPI2_BASE_ADDR MX2x_CSPI2_BASE_ADDR
-#define SSI1_BASE_ADDR MX2x_SSI1_BASE_ADDR
-#define SSI2_BASE_ADDR MX2x_SSI2_BASE_ADDR
-#define I2C_BASE_ADDR MX2x_I2C_BASE_ADDR
-#define SDHC1_BASE_ADDR MX2x_SDHC1_BASE_ADDR
-#define SDHC2_BASE_ADDR MX2x_SDHC2_BASE_ADDR
-#define GPIO_BASE_ADDR MX2x_GPIO_BASE_ADDR
-#define AUDMUX_BASE_ADDR MX2x_AUDMUX_BASE_ADDR
-#define CSPI3_BASE_ADDR MX2x_CSPI3_BASE_ADDR
-#define LCDC_BASE_ADDR MX2x_LCDC_BASE_ADDR
-#define SLCDC_BASE_ADDR MX2x_SLCDC_BASE_ADDR
-#define USBOTG_BASE_ADDR MX2x_USBOTG_BASE_ADDR
-#define EMMA_PP_BASE_ADDR MX2x_EMMA_PP_BASE_ADDR
-#define EMMA_PRP_BASE_ADDR MX2x_EMMA_PRP_BASE_ADDR
-#define CCM_BASE_ADDR MX2x_CCM_BASE_ADDR
-#define SYSCTRL_BASE_ADDR MX2x_SYSCTRL_BASE_ADDR
-#define JAM_BASE_ADDR MX2x_JAM_BASE_ADDR
-#define MAX_BASE_ADDR MX2x_MAX_BASE_ADDR
-#define AVIC_BASE_ADDR MX2x_AVIC_BASE_ADDR
-#define SAHB1_BASE_ADDR MX2x_SAHB1_BASE_ADDR
-#define SAHB1_BASE_ADDR_VIRT MX2x_SAHB1_BASE_ADDR_VIRT
-#define SAHB1_SIZE MX2x_SAHB1_SIZE
-#define CSI_BASE_ADDR MX2x_CSI_BASE_ADDR
-#define MXC_INT_CSPI3 MX2x_INT_CSPI3
-#define MXC_INT_GPIO MX2x_INT_GPIO
-#define MXC_INT_SDHC2 MX2x_INT_SDHC2
-#define MXC_INT_SDHC1 MX2x_INT_SDHC1
-#define MXC_INT_I2C MX2x_INT_I2C
-#define MXC_INT_SSI2 MX2x_INT_SSI2
-#define MXC_INT_SSI1 MX2x_INT_SSI1
-#define MXC_INT_CSPI2 MX2x_INT_CSPI2
-#define MXC_INT_CSPI1 MX2x_INT_CSPI1
-#define MXC_INT_UART4 MX2x_INT_UART4
-#define MXC_INT_UART3 MX2x_INT_UART3
-#define MXC_INT_UART2 MX2x_INT_UART2
-#define MXC_INT_UART1 MX2x_INT_UART1
-#define MXC_INT_KPP MX2x_INT_KPP
-#define MXC_INT_RTC MX2x_INT_RTC
-#define MXC_INT_PWM MX2x_INT_PWM
-#define MXC_INT_GPT3 MX2x_INT_GPT3
-#define MXC_INT_GPT2 MX2x_INT_GPT2
-#define MXC_INT_GPT1 MX2x_INT_GPT1
-#define MXC_INT_WDOG MX2x_INT_WDOG
-#define MXC_INT_PCMCIA MX2x_INT_PCMCIA
-#define MXC_INT_NANDFC MX2x_INT_NANDFC
-#define MXC_INT_CSI MX2x_INT_CSI
-#define MXC_INT_DMACH0 MX2x_INT_DMACH0
-#define MXC_INT_DMACH1 MX2x_INT_DMACH1
-#define MXC_INT_DMACH2 MX2x_INT_DMACH2
-#define MXC_INT_DMACH3 MX2x_INT_DMACH3
-#define MXC_INT_DMACH4 MX2x_INT_DMACH4
-#define MXC_INT_DMACH5 MX2x_INT_DMACH5
-#define MXC_INT_DMACH6 MX2x_INT_DMACH6
-#define MXC_INT_DMACH7 MX2x_INT_DMACH7
-#define MXC_INT_DMACH8 MX2x_INT_DMACH8
-#define MXC_INT_DMACH9 MX2x_INT_DMACH9
-#define MXC_INT_DMACH10 MX2x_INT_DMACH10
-#define MXC_INT_DMACH11 MX2x_INT_DMACH11
-#define MXC_INT_DMACH12 MX2x_INT_DMACH12
-#define MXC_INT_DMACH13 MX2x_INT_DMACH13
-#define MXC_INT_DMACH14 MX2x_INT_DMACH14
-#define MXC_INT_DMACH15 MX2x_INT_DMACH15
-#define MXC_INT_EMMAPRP MX2x_INT_EMMAPRP
-#define MXC_INT_EMMAPP MX2x_INT_EMMAPP
-#define MXC_INT_SLCDC MX2x_INT_SLCDC
-#define MXC_INT_LCDC MX2x_INT_LCDC
-#define DMA_REQ_CSPI3_RX MX2x_DMA_REQ_CSPI3_RX
-#define DMA_REQ_CSPI3_TX MX2x_DMA_REQ_CSPI3_TX
-#define DMA_REQ_EXT MX2x_DMA_REQ_EXT
-#define DMA_REQ_SDHC2 MX2x_DMA_REQ_SDHC2
-#define DMA_REQ_SDHC1 MX2x_DMA_REQ_SDHC1
-#define DMA_REQ_SSI2_RX0 MX2x_DMA_REQ_SSI2_RX0
-#define DMA_REQ_SSI2_TX0 MX2x_DMA_REQ_SSI2_TX0
-#define DMA_REQ_SSI2_RX1 MX2x_DMA_REQ_SSI2_RX1
-#define DMA_REQ_SSI2_TX1 MX2x_DMA_REQ_SSI2_TX1
-#define DMA_REQ_SSI1_RX0 MX2x_DMA_REQ_SSI1_RX0
-#define DMA_REQ_SSI1_TX0 MX2x_DMA_REQ_SSI1_TX0
-#define DMA_REQ_SSI1_RX1 MX2x_DMA_REQ_SSI1_RX1
-#define DMA_REQ_SSI1_TX1 MX2x_DMA_REQ_SSI1_TX1
-#define DMA_REQ_CSPI2_RX MX2x_DMA_REQ_CSPI2_RX
-#define DMA_REQ_CSPI2_TX MX2x_DMA_REQ_CSPI2_TX
-#define DMA_REQ_CSPI1_RX MX2x_DMA_REQ_CSPI1_RX
-#define DMA_REQ_CSPI1_TX MX2x_DMA_REQ_CSPI1_TX
-#define DMA_REQ_UART4_RX MX2x_DMA_REQ_UART4_RX
-#define DMA_REQ_UART4_TX MX2x_DMA_REQ_UART4_TX
-#define DMA_REQ_UART3_RX MX2x_DMA_REQ_UART3_RX
-#define DMA_REQ_UART3_TX MX2x_DMA_REQ_UART3_TX
-#define DMA_REQ_UART2_RX MX2x_DMA_REQ_UART2_RX
-#define DMA_REQ_UART2_TX MX2x_DMA_REQ_UART2_TX
-#define DMA_REQ_UART1_RX MX2x_DMA_REQ_UART1_RX
-#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
-#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
-#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
-#endif
-
 #endif /* ifndef __MACH_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 61cfe827498..79e7fc01bb5 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -15,7 +15,6 @@
 #define MX31_L2CC_SIZE			SZ_1M
 
 #define MX31_AIPS1_BASE_ADDR		0x43f00000
-#define MX31_AIPS1_BASE_ADDR_VIRT	0xfc000000
 #define MX31_AIPS1_SIZE			SZ_1M
 #define MX31_MAX_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x04000)
 #define MX31_EVTMON_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x08000)
@@ -25,7 +24,10 @@
 #define MX31_ECT_CTIO_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x18000)
 #define MX31_I2C1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
 #define MX31_I2C3_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x84000)
-#define MX31_OTG_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_USB_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_USB_OTG_BASE_ADDR			(MX31_USB_BASE_ADDR + 0x0000)
+#define MX31_USB_HS1_BASE_ADDR			(MX31_USB_BASE_ADDR + 0x0200)
+#define MX31_USB_HS2_BASE_ADDR			(MX31_USB_BASE_ADDR + 0x0400)
 #define MX31_ATA_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x8c000)
 #define MX31_UART1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x90000)
 #define MX31_UART2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x94000)
@@ -41,10 +43,9 @@
 #define MX31_ECT_IP2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xbc000)
 
 #define MX31_SPBA0_BASE_ADDR		0x50000000
-#define MX31_SPBA0_BASE_ADDR_VIRT	0xfc100000
 #define MX31_SPBA0_SIZE			SZ_1M
-#define MX31_MMC_SDHC1_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x04000)
-#define MX31_MMC_SDHC2_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x08000)
+#define MX31_SDHC1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x04000)
+#define MX31_SDHC2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x08000)
 #define MX31_UART3_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x0c000)
 #define MX31_CSPI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x10000)
 #define MX31_SSI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x14000)
@@ -55,7 +56,6 @@
 #define MX31_SPBA_CTRL_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x3c000)
 
 #define MX31_AIPS2_BASE_ADDR		0x53f00000
-#define MX31_AIPS2_BASE_ADDR_VIRT	0xfc200000
 #define MX31_AIPS2_SIZE			SZ_1M
 #define MX31_CCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x80000)
 #define MX31_CSPI3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x84000)
@@ -84,7 +84,6 @@
 #define MX31_ROMP_SIZE			SZ_1M
 
 #define MX31_AVIC_BASE_ADDR		0x68000000
-#define MX31_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX31_AVIC_SIZE			SZ_1M
 
 #define MX31_IPU_MEM_BASE_ADDR		0x70000000
@@ -97,15 +96,14 @@
 #define MX31_CS3_BASE_ADDR		0xb2000000
 
 #define MX31_CS4_BASE_ADDR		0xb4000000
-#define MX31_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX31_CS4_BASE_ADDR_VIRT		0xf6000000
 #define MX31_CS4_SIZE			SZ_32M
 
 #define MX31_CS5_BASE_ADDR		0xb6000000
-#define MX31_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX31_CS5_BASE_ADDR_VIRT		0xf8000000
 #define MX31_CS5_SIZE			SZ_32M
 
 #define MX31_X_MEMC_BASE_ADDR		0xb8000000
-#define MX31_X_MEMC_BASE_ADDR_VIRT	0xfc320000
 #define MX31_X_MEMC_SIZE		SZ_64K
 #define MX31_NFC_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x0000)
 #define MX31_ESDCTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x1000)
@@ -121,12 +119,8 @@
 
 #define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
-#define MX31_IO_ADDRESS(x) (						\
-	IMX_IO_ADDRESS(x, MX31_AIPS1) ?:				\
-	IMX_IO_ADDRESS(x, MX31_AIPS2) ?:				\
-	IMX_IO_ADDRESS(x, MX31_AVIC) ?:					\
-	IMX_IO_ADDRESS(x, MX31_X_MEMC) ?:				\
-	IMX_IO_ADDRESS(x, MX31_SPBA0))
+#define MX31_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX31_IO_ADDRESS(x)		IOMEM(MX31_IO_P2V(x))
 
 #ifndef __ASSEMBLER__
 static inline void mx31_setup_weimcs(size_t cs,
@@ -143,8 +137,8 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MX31_INT_MPEG4_ENCODER	5
 #define MX31_INT_RTIC		6
 #define MX31_INT_FIRI		7
-#define MX31_INT_MMC_SDHC2	8
-#define MX31_INT_MMC_SDHC1	9
+#define MX31_INT_SDHC2		8
+#define MX31_INT_SDHC1		9
 #define MX31_INT_I2C1		10
 #define MX31_INT_SSI2		11
 #define MX31_INT_SSI1		12
@@ -170,10 +164,9 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MX31_INT_UART2		32
 #define MX31_INT_NFC		33
 #define MX31_INT_SDMA		34
-#define MX31_INT_USB1		35
-#define MX31_INT_USB2		36
-#define MX31_INT_USB3		37
-#define MX31_INT_USB4		38
+#define MX31_INT_USB_HS1	35
+#define MX31_INT_USB_HS2	36
+#define MX31_INT_USB_OTG	37
 #define MX31_INT_MSHC1		39
 #define MX31_INT_MSHC2		40
 #define MX31_INT_IPU_ERR	41
@@ -197,6 +190,8 @@ static inline void mx31_setup_weimcs(size_t cs,
 #define MX31_INT_EXT_WDOG	62
 #define MX31_INT_EXT_TV		63
 
+#define MX31_DMA_REQ_SDHC1	20
+#define MX31_DMA_REQ_SDHC2	21
 #define MX31_DMA_REQ_SSI2_RX1	22
 #define MX31_DMA_REQ_SSI2_TX1	23
 #define MX31_DMA_REQ_SSI2_RX0	24
@@ -208,52 +203,4 @@ static inline void mx31_setup_weimcs(size_t cs,
 
 #define MX31_PROD_SIGNATURE		0x1	/* For MX31 */
 
-/* silicon revisions specific to i.MX31 */
-#define MX31_CHIP_REV_1_0		0x10
-#define MX31_CHIP_REV_1_1		0x11
-#define MX31_CHIP_REV_1_2		0x12
-#define MX31_CHIP_REV_1_3		0x13
-#define MX31_CHIP_REV_2_0		0x20
-#define MX31_CHIP_REV_2_1		0x21
-#define MX31_CHIP_REV_2_2		0x22
-#define MX31_CHIP_REV_2_3		0x23
-#define MX31_CHIP_REV_3_0		0x30
-#define MX31_CHIP_REV_3_1		0x31
-#define MX31_CHIP_REV_3_2		0x32
-
-#define MX31_SYSTEM_REV_MIN		MX31_CHIP_REV_1_0
-#define MX31_SYSTEM_REV_NUM		3
-
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
-#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
-#define UART5_BASE_ADDR MX31_UART5_BASE_ADDR
-#define MMC_SDHC1_BASE_ADDR MX31_MMC_SDHC1_BASE_ADDR
-#define MMC_SDHC2_BASE_ADDR MX31_MMC_SDHC2_BASE_ADDR
-#define SIM1_BASE_ADDR MX31_SIM1_BASE_ADDR
-#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR
-#define CSPI3_BASE_ADDR MX31_CSPI3_BASE_ADDR
-#define FIRI_BASE_ADDR MX31_FIRI_BASE_ADDR
-#define SCM_BASE_ADDR MX31_SCM_BASE_ADDR
-#define SMN_BASE_ADDR MX31_SMN_BASE_ADDR
-#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR
-#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER
-#define MXC_INT_FIRI MX31_INT_FIRI
-#define MXC_INT_MBX MX31_INT_MBX
-#define MXC_INT_CSPI3 MX31_INT_CSPI3
-#define MXC_INT_SIM2 MX31_INT_SIM2
-#define MXC_INT_SIM1 MX31_INT_SIM1
-#define MXC_INT_CCM_DVFS MX31_INT_CCM_DVFS
-#define MXC_INT_USB1 MX31_INT_USB1
-#define MXC_INT_USB2 MX31_INT_USB2
-#define MXC_INT_USB3 MX31_INT_USB3
-#define MXC_INT_USB4 MX31_INT_USB4
-#define MXC_INT_MSHC2 MX31_INT_MSHC2
-#define MXC_INT_UART4 MX31_INT_UART4
-#define MXC_INT_UART5 MX31_INT_UART5
-#define MXC_INT_CCM MX31_INT_CCM
-#define MXC_INT_PCMCIA MX31_INT_PCMCIA
-#endif
-
 #endif /* ifndef __MACH_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 6267cff6035..d13dbfeef08 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -11,7 +11,6 @@
 #define MX35_L2CC_SIZE			SZ_1M
 
 #define MX35_AIPS1_BASE_ADDR		0x43f00000
-#define MX35_AIPS1_BASE_ADDR_VIRT	0xfc000000
 #define MX35_AIPS1_SIZE			SZ_1M
 #define MX35_MAX_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x04000)
 #define MX35_EVTMON_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x08000)
@@ -33,7 +32,6 @@
 #define MX35_ECT_IP2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xbc000)
 
 #define MX35_SPBA0_BASE_ADDR		0x50000000
-#define MX35_SPBA0_BASE_ADDR_VIRT	0xfc100000
 #define MX35_SPBA0_SIZE			SZ_1M
 #define MX35_UART3_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x0c000)
 #define MX35_CSPI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x10000)
@@ -44,7 +42,6 @@
 #define MX35_SPBA_CTRL_BASE_ADDR		(MX35_SPBA0_BASE_ADDR + 0x3c000)
 
 #define MX35_AIPS2_BASE_ADDR		0x53f00000
-#define MX35_AIPS2_BASE_ADDR_VIRT	0xfc200000
 #define MX35_AIPS2_SIZE			SZ_1M
 #define MX35_CCM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x80000)
 #define MX35_GPT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x90000)
@@ -68,15 +65,19 @@
 #define MX35_CAN2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe8000)
 #define MX35_RTIC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xec000)
 #define MX35_IIM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xf0000)
-
-#define MX35_OTG_BASE_ADDR		0x53ff4000
+#define MX35_USB_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xf4000)
+#define MX35_USB_OTG_BASE_ADDR			(MX35_USB_BASE_ADDR + 0x0000)
+/*
+ * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for
+ * HS.  When host support was implemented only a preliminary document was
+ * available, which told 0x400.  This works fine.
+ */
+#define MX35_USB_HS_BASE_ADDR			(MX35_USB_BASE_ADDR + 0x0400)
 
 #define MX35_ROMP_BASE_ADDR		0x60000000
-#define MX35_ROMP_BASE_ADDR_VIRT	0xfc500000
 #define MX35_ROMP_SIZE			SZ_1M
 
 #define MX35_AVIC_BASE_ADDR		0x68000000
-#define MX35_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX35_AVIC_SIZE			SZ_1M
 
 /*
@@ -92,18 +93,17 @@
 #define MX35_CS3_BASE_ADDR		0xb2000000
 
 #define MX35_CS4_BASE_ADDR		0xb4000000
-#define MX35_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX35_CS4_BASE_ADDR_VIRT		0xf6000000
 #define MX35_CS4_SIZE			SZ_32M
 
 #define MX35_CS5_BASE_ADDR		0xb6000000
-#define MX35_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX35_CS5_BASE_ADDR_VIRT		0xf8000000
 #define MX35_CS5_SIZE			SZ_32M
 
 /*
  * NAND, SDRAM, WEIM, M3IF, EMI controllers
  */
 #define MX35_X_MEMC_BASE_ADDR		0xb8000000
-#define MX35_X_MEMC_BASE_ADDR_VIRT	0xfc320000
 #define MX35_X_MEMC_SIZE		SZ_64K
 #define MX35_ESDCTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x1000)
 #define MX35_WEIM_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x2000)
@@ -114,12 +114,8 @@
 #define MX35_NFC_BASE_ADDR		0xbb000000
 #define MX35_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
-#define MX35_IO_ADDRESS(x) (						\
-	IMX_IO_ADDRESS(x, MX35_AIPS1) ?:				\
-	IMX_IO_ADDRESS(x, MX35_AIPS2) ?:				\
-	IMX_IO_ADDRESS(x, MX35_AVIC) ?:					\
-	IMX_IO_ADDRESS(x, MX35_X_MEMC) ?:				\
-	IMX_IO_ADDRESS(x, MX35_SPBA0))
+#define MX35_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX35_IO_ADDRESS(x)		IOMEM(MX35_IO_P2V(x))
 
 /*
  * Interrupt numbers
@@ -153,8 +149,8 @@
 #define MX35_INT_UART2		32
 #define MX35_INT_NFC		33
 #define MX35_INT_SDMA		34
-#define MX35_INT_USBHS		35
-#define MX35_INT_USBOTG		37
+#define MX35_INT_USB_HS		35
+#define MX35_INT_USB_OTG	37
 #define MX35_INT_MSHC1		39
 #define MX35_INT_ESAI		40
 #define MX35_INT_IPU_ERR	41
@@ -190,23 +186,4 @@
 
 #define MX35_PROD_SIGNATURE		0x1	/* For MX31 */
 
-#define MX35_SYSTEM_REV_MIN		MX3x_CHIP_REV_1_0
-#define MX35_SYSTEM_REV_NUM		3
-
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
-#define MXC_INT_OWIRE MX35_INT_OWIRE
-#define MXC_INT_GPU2D MX35_INT_GPU2D
-#define MXC_INT_ASRC MX35_INT_ASRC
-#define MXC_INT_USBHS MX35_INT_USBHS
-#define MXC_INT_USBOTG MX35_INT_USBOTG
-#define MXC_INT_ESAI MX35_INT_ESAI
-#define MXC_INT_CAN1 MX35_INT_CAN1
-#define MXC_INT_CAN2 MX35_INT_CAN2
-#define MXC_INT_MLB MX35_INT_MLB
-#define MXC_INT_SPDIF MX35_INT_SPDIF
-#define MXC_INT_FEC MX35_INT_FEC
-#endif
-
 #endif /* ifndef __MACH_MX35_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index d1bd26d7b8a..388a407d72d 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -44,7 +44,6 @@
  * AIPS 1
  */
 #define MX3x_AIPS1_BASE_ADDR		0x43f00000
-#define MX3x_AIPS1_BASE_ADDR_VIRT	0xfc000000
 #define MX3x_AIPS1_SIZE			SZ_1M
 #define MX3x_MAX_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x04000)
 #define MX3x_EVTMON_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x08000)
@@ -69,7 +68,6 @@
  * SPBA global module enabled #0
  */
 #define MX3x_SPBA0_BASE_ADDR		0x50000000
-#define MX3x_SPBA0_BASE_ADDR_VIRT	0xfc100000
 #define MX3x_SPBA0_SIZE			SZ_1M
 #define MX3x_UART3_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x0c000)
 #define MX3x_CSPI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x10000)
@@ -82,7 +80,6 @@
  * AIPS 2
  */
 #define MX3x_AIPS2_BASE_ADDR		0x53f00000
-#define MX3x_AIPS2_BASE_ADDR_VIRT	0xfc200000
 #define MX3x_AIPS2_SIZE			SZ_1M
 #define MX3x_CCM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x80000)
 #define MX3x_GPT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x90000)
@@ -105,11 +102,9 @@
  * ROMP and AVIC
  */
 #define MX3x_ROMP_BASE_ADDR		0x60000000
-#define MX3x_ROMP_BASE_ADDR_VIRT	0xfc500000
 #define MX3x_ROMP_SIZE			SZ_1M
 
 #define MX3x_AVIC_BASE_ADDR		0x68000000
-#define MX3x_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX3x_AVIC_SIZE			SZ_1M
 
 /*
@@ -125,18 +120,17 @@
 #define MX3x_CS3_BASE_ADDR		0xb2000000
 
 #define MX3x_CS4_BASE_ADDR		0xb4000000
-#define MX3x_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX3x_CS4_BASE_ADDR_VIRT		0xf6000000
 #define MX3x_CS4_SIZE			SZ_32M
 
 #define MX3x_CS5_BASE_ADDR		0xb6000000
-#define MX3x_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX3x_CS5_BASE_ADDR_VIRT		0xf8000000
 #define MX3x_CS5_SIZE			SZ_32M
 
 /*
  * NAND, SDRAM, WEIM, M3IF, EMI controllers
  */
 #define MX3x_X_MEMC_BASE_ADDR		0xb8000000
-#define MX3x_X_MEMC_BASE_ADDR_VIRT	0xfc320000
 #define MX3x_X_MEMC_SIZE		SZ_64K
 #define MX3x_ESDCTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x1000)
 #define MX3x_WEIM_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x2000)
@@ -146,56 +140,6 @@
 
 #define MX3x_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
-/*!
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0xDEADBEEF
- */
-#define IO_ADDRESS(x)   \
-	(void __force __iomem *) \
-	(((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
-	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
-	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
-	((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
-	((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
-	((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
-	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
-	0xDEADBEEF)
-
-/*
- * define the address mapping macros: in physical address order
- */
-#define L2CC_IO_ADDRESS(x)  \
-	(((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
-
-#define AIPS1_IO_ADDRESS(x)  \
-	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
-
-#define SPBA0_IO_ADDRESS(x)  \
-	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
-
-#define AIPS2_IO_ADDRESS(x)  \
-	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
-
-#define ROMP_IO_ADDRESS(x)  \
-	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
-
-#define AVIC_IO_ADDRESS(x)  \
-	(((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
-
-#define CS4_IO_ADDRESS(x)  \
-	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
-
-#define CS5_IO_ADDRESS(x)  \
-	(((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
-
-#define X_MEMC_IO_ADDRESS(x)  \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
-#define PCMCIA_IO_ADDRESS(x) \
-	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
-
 /*
  * Interrupt numbers
  */
@@ -240,22 +184,6 @@
 
 #define MX3x_PROD_SIGNATURE		0x1	/* For MX31 */
 
-/* silicon revisions specific to i.MX31 and i.MX35 */
-#define MX3x_CHIP_REV_1_0		0x10
-#define MX3x_CHIP_REV_1_1		0x11
-#define MX3x_CHIP_REV_1_2		0x12
-#define MX3x_CHIP_REV_1_3		0x13
-#define MX3x_CHIP_REV_2_0		0x20
-#define MX3x_CHIP_REV_2_1		0x21
-#define MX3x_CHIP_REV_2_2		0x22
-#define MX3x_CHIP_REV_2_3		0x23
-#define MX3x_CHIP_REV_3_0		0x30
-#define MX3x_CHIP_REV_3_1		0x31
-#define MX3x_CHIP_REV_3_2		0x32
-
-#define MX3x_SYSTEM_REV_MIN		MX3x_CHIP_REV_1_0
-#define MX3x_SYSTEM_REV_NUM		3
-
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
@@ -277,126 +205,4 @@ static inline int mx35_revision(void)
 }
 #endif
 
-#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
-/* these should go away */
-#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
-#define L2CC_SIZE MX3x_L2CC_SIZE
-#define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR
-#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT
-#define AIPS1_SIZE MX3x_AIPS1_SIZE
-#define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR
-#define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR
-#define CLKCTL_BASE_ADDR MX3x_CLKCTL_BASE_ADDR
-#define ETB_SLOT4_BASE_ADDR MX3x_ETB_SLOT4_BASE_ADDR
-#define ETB_SLOT5_BASE_ADDR MX3x_ETB_SLOT5_BASE_ADDR
-#define ECT_CTIO_BASE_ADDR MX3x_ECT_CTIO_BASE_ADDR
-#define I2C_BASE_ADDR MX3x_I2C_BASE_ADDR
-#define I2C3_BASE_ADDR MX3x_I2C3_BASE_ADDR
-#define UART1_BASE_ADDR MX3x_UART1_BASE_ADDR
-#define UART2_BASE_ADDR MX3x_UART2_BASE_ADDR
-#define I2C2_BASE_ADDR MX3x_I2C2_BASE_ADDR
-#define OWIRE_BASE_ADDR MX3x_OWIRE_BASE_ADDR
-#define SSI1_BASE_ADDR MX3x_SSI1_BASE_ADDR
-#define CSPI1_BASE_ADDR MX3x_CSPI1_BASE_ADDR
-#define KPP_BASE_ADDR MX3x_KPP_BASE_ADDR
-#define IOMUXC_BASE_ADDR MX3x_IOMUXC_BASE_ADDR
-#define ECT_IP1_BASE_ADDR MX3x_ECT_IP1_BASE_ADDR
-#define ECT_IP2_BASE_ADDR MX3x_ECT_IP2_BASE_ADDR
-#define SPBA0_BASE_ADDR MX3x_SPBA0_BASE_ADDR
-#define SPBA0_BASE_ADDR_VIRT MX3x_SPBA0_BASE_ADDR_VIRT
-#define SPBA0_SIZE MX3x_SPBA0_SIZE
-#define UART3_BASE_ADDR MX3x_UART3_BASE_ADDR
-#define CSPI2_BASE_ADDR MX3x_CSPI2_BASE_ADDR
-#define SSI2_BASE_ADDR MX3x_SSI2_BASE_ADDR
-#define ATA_DMA_BASE_ADDR MX3x_ATA_DMA_BASE_ADDR
-#define MSHC1_BASE_ADDR MX3x_MSHC1_BASE_ADDR
-#define SPBA_CTRL_BASE_ADDR MX3x_SPBA_CTRL_BASE_ADDR
-#define AIPS2_BASE_ADDR MX3x_AIPS2_BASE_ADDR
-#define AIPS2_BASE_ADDR_VIRT MX3x_AIPS2_BASE_ADDR_VIRT
-#define AIPS2_SIZE MX3x_AIPS2_SIZE
-#define CCM_BASE_ADDR MX3x_CCM_BASE_ADDR
-#define GPT1_BASE_ADDR MX3x_GPT1_BASE_ADDR
-#define EPIT1_BASE_ADDR MX3x_EPIT1_BASE_ADDR
-#define EPIT2_BASE_ADDR MX3x_EPIT2_BASE_ADDR
-#define GPIO3_BASE_ADDR MX3x_GPIO3_BASE_ADDR
-#define SCC_BASE_ADDR MX3x_SCC_BASE_ADDR
-#define RNGA_BASE_ADDR MX3x_RNGA_BASE_ADDR
-#define IPU_CTRL_BASE_ADDR MX3x_IPU_CTRL_BASE_ADDR
-#define AUDMUX_BASE_ADDR MX3x_AUDMUX_BASE_ADDR
-#define GPIO1_BASE_ADDR MX3x_GPIO1_BASE_ADDR
-#define GPIO2_BASE_ADDR MX3x_GPIO2_BASE_ADDR
-#define SDMA_BASE_ADDR MX3x_SDMA_BASE_ADDR
-#define RTC_BASE_ADDR MX3x_RTC_BASE_ADDR
-#define WDOG_BASE_ADDR MX3x_WDOG_BASE_ADDR
-#define PWM_BASE_ADDR MX3x_PWM_BASE_ADDR
-#define RTIC_BASE_ADDR MX3x_RTIC_BASE_ADDR
-#define ROMP_BASE_ADDR MX3x_ROMP_BASE_ADDR
-#define ROMP_BASE_ADDR_VIRT MX3x_ROMP_BASE_ADDR_VIRT
-#define ROMP_SIZE MX3x_ROMP_SIZE
-#define AVIC_BASE_ADDR MX3x_AVIC_BASE_ADDR
-#define AVIC_BASE_ADDR_VIRT MX3x_AVIC_BASE_ADDR_VIRT
-#define AVIC_SIZE MX3x_AVIC_SIZE
-#define IPU_MEM_BASE_ADDR MX3x_IPU_MEM_BASE_ADDR
-#define CSD0_BASE_ADDR MX3x_CSD0_BASE_ADDR
-#define CSD1_BASE_ADDR MX3x_CSD1_BASE_ADDR
-#define CS0_BASE_ADDR MX3x_CS0_BASE_ADDR
-#define CS1_BASE_ADDR MX3x_CS1_BASE_ADDR
-#define CS2_BASE_ADDR MX3x_CS2_BASE_ADDR
-#define CS3_BASE_ADDR MX3x_CS3_BASE_ADDR
-#define CS4_BASE_ADDR MX3x_CS4_BASE_ADDR
-#define CS4_BASE_ADDR_VIRT MX3x_CS4_BASE_ADDR_VIRT
-#define CS4_SIZE MX3x_CS4_SIZE
-#define CS5_BASE_ADDR MX3x_CS5_BASE_ADDR
-#define CS5_BASE_ADDR_VIRT MX3x_CS5_BASE_ADDR_VIRT
-#define CS5_SIZE MX3x_CS5_SIZE
-#define X_MEMC_BASE_ADDR MX3x_X_MEMC_BASE_ADDR
-#define X_MEMC_BASE_ADDR_VIRT MX3x_X_MEMC_BASE_ADDR_VIRT
-#define X_MEMC_SIZE MX3x_X_MEMC_SIZE
-#define ESDCTL_BASE_ADDR MX3x_ESDCTL_BASE_ADDR
-#define WEIM_BASE_ADDR MX3x_WEIM_BASE_ADDR
-#define M3IF_BASE_ADDR MX3x_M3IF_BASE_ADDR
-#define EMI_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR
-#define PCMCIA_CTL_BASE_ADDR MX3x_PCMCIA_CTL_BASE_ADDR
-#define PCMCIA_MEM_BASE_ADDR MX3x_PCMCIA_MEM_BASE_ADDR
-#define MXC_INT_I2C3 MX3x_INT_I2C3
-#define MXC_INT_I2C2 MX3x_INT_I2C2
-#define MXC_INT_RTIC MX3x_INT_RTIC
-#define MXC_INT_I2C MX3x_INT_I2C
-#define MXC_INT_CSPI2 MX3x_INT_CSPI2
-#define MXC_INT_CSPI1 MX3x_INT_CSPI1
-#define MXC_INT_ATA MX3x_INT_ATA
-#define MXC_INT_UART3 MX3x_INT_UART3
-#define MXC_INT_IIM MX3x_INT_IIM
-#define MXC_INT_RNGA MX3x_INT_RNGA
-#define MXC_INT_EVTMON MX3x_INT_EVTMON
-#define MXC_INT_KPP MX3x_INT_KPP
-#define MXC_INT_RTC MX3x_INT_RTC
-#define MXC_INT_PWM MX3x_INT_PWM
-#define MXC_INT_EPIT2 MX3x_INT_EPIT2
-#define MXC_INT_EPIT1 MX3x_INT_EPIT1
-#define MXC_INT_GPT MX3x_INT_GPT
-#define MXC_INT_POWER_FAIL MX3x_INT_POWER_FAIL
-#define MXC_INT_UART2 MX3x_INT_UART2
-#define MXC_INT_NANDFC MX3x_INT_NANDFC
-#define MXC_INT_SDMA MX3x_INT_SDMA
-#define MXC_INT_MSHC1 MX3x_INT_MSHC1
-#define MXC_INT_IPU_ERR MX3x_INT_IPU_ERR
-#define MXC_INT_IPU_SYN MX3x_INT_IPU_SYN
-#define MXC_INT_UART1 MX3x_INT_UART1
-#define MXC_INT_ECT MX3x_INT_ECT
-#define MXC_INT_SCC_SCM MX3x_INT_SCC_SCM
-#define MXC_INT_SCC_SMN MX3x_INT_SCC_SMN
-#define MXC_INT_GPIO2 MX3x_INT_GPIO2
-#define MXC_INT_GPIO1 MX3x_INT_GPIO1
-#define MXC_INT_WDOG MX3x_INT_WDOG
-#define MXC_INT_GPIO3 MX3x_INT_GPIO3
-#define MXC_INT_EXT_POWER MX3x_INT_EXT_POWER
-#define MXC_INT_EXT_TEMPER MX3x_INT_EXT_TEMPER
-#define MXC_INT_EXT_SENSOR60 MX3x_INT_EXT_SENSOR60
-#define MXC_INT_EXT_SENSOR61 MX3x_INT_EXT_SENSOR61
-#define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG
-#define MXC_INT_EXT_TV MX3x_INT_EXT_TV
-#define PROD_SIGNATURE MX3x_PROD_SIGNATURE
-#endif
-
 #endif /* ifndef __MACH_MX3x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx50.h b/arch/arm/plat-mxc/include/mach/mx50.h
new file mode 100644
index 00000000000..aaec2a6e7b3
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx50.h
@@ -0,0 +1,285 @@
+#ifndef __MACH_MX50_H__
+#define __MACH_MX50_H__
+
+/*
+ * IROM
+ */
+#define MX50_IROM_BASE_ADDR		0x0
+#define MX50_IROM_SIZE			SZ_64K
+
+/* TZIC */
+#define MX50_TZIC_BASE_ADDR		0x0fffc000
+#define MX50_TZIC_SIZE			SZ_16K
+
+/*
+ * IRAM
+ */
+#define MX50_IRAM_BASE_ADDR	0xf8000000	/* internal ram */
+#define MX50_IRAM_PARTITIONS	16
+#define MX50_IRAM_SIZE		(MX50_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
+
+/*
+ * Databahn
+ */
+#define MX50_DATABAHN_BASE_ADDR			0x14000000
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX50_GPU2D_BASE_ADDR		0x20000000
+
+#define MX50_DEBUG_BASE_ADDR		0x40000000
+#define MX50_DEBUG_SIZE			SZ_1M
+#define MX50_ETB_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00001000)
+#define MX50_ETM_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00002000)
+#define MX50_TPIU_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00003000)
+#define MX50_CTI0_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00004000)
+#define MX50_CTI1_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00005000)
+#define MX50_CTI2_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00006000)
+#define MX50_CTI3_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00007000)
+#define MX50_CORTEX_DBG_BASE_ADDR	(MX50_DEBUG_BASE_ADDR + 0x00008000)
+
+#define MX50_APBHDMA_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01000000)
+#define MX50_OCOTP_CTRL_BASE_ADDR	(MX50_DEBUG_BASE_ADDR + 0x01002000)
+#define MX50_DIGCTL_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01004000)
+#define MX50_GPMI_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01006000)
+#define MX50_BCH_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01008000)
+#define MX50_ELCDIF_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100a000)
+#define MX50_EPXP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100c000)
+#define MX50_DCP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100e000)
+#define MX50_EPDC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01010000)
+#define MX50_QOSC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01012000)
+#define MX50_PERFMON_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01014000)
+#define MX50_SSP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01016000)
+#define MX50_ANATOP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01018000)
+#define MX50_NIC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x08000000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX50_SPBA0_BASE_ADDR		0x50000000
+#define MX50_SPBA0_SIZE			SZ_1M
+
+#define MX50_MMC_SDHC1_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00004000)
+#define MX50_MMC_SDHC2_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00008000)
+#define MX50_UART3_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x0000c000)
+#define MX50_CSPI1_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x00010000)
+#define MX50_SSI2_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x00014000)
+#define MX50_MMC_SDHC3_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00020000)
+#define MX50_MMC_SDHC4_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00024000)
+
+/*
+ * AIPS 1
+ */
+#define MX50_AIPS1_BASE_ADDR	0x53f00000
+#define MX50_AIPS1_SIZE		SZ_1M
+
+#define MX50_OTG_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00080000)
+#define MX50_GPIO1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00084000)
+#define MX50_GPIO2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00088000)
+#define MX50_GPIO3_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x0008c000)
+#define MX50_GPIO4_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00090000)
+#define MX50_KPP_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00094000)
+#define MX50_WDOG_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00098000)
+#define MX50_GPT1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a0000)
+#define MX50_SRTC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a4000)
+#define MX50_IOMUXC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a8000)
+#define MX50_EPIT1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000ac000)
+#define MX50_PWM1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000b4000)
+#define MX50_PWM2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000b8000)
+#define MX50_UART1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000bc000)
+#define MX50_UART2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000c0000)
+#define MX50_SRC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d0000)
+#define MX50_CCM_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d4000)
+#define MX50_GPC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d8000)
+#define MX50_GPIO5_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000dc000)
+#define MX50_GPIO6_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000e0000)
+#define MX50_I2C3_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000ec000)
+#define MX50_UART4_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f0000)
+
+#define MX50_MSHC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f4000)
+#define MX50_RNGB_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f8000)
+
+/*
+ * AIPS 2
+ */
+#define MX50_AIPS2_BASE_ADDR	0x63f00000
+#define MX50_AIPS2_SIZE		SZ_1M
+
+#define MX50_PLL1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00080000)
+#define MX50_PLL2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00084000)
+#define MX50_PLL3_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00088000)
+#define MX50_UART5_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00090000)
+#define MX50_AHBMAX_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00094000)
+#define MX50_ARM_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000a0000)
+#define MX50_OWIRE_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000a4000)
+#define MX50_CSPI2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000ac000)
+#define MX50_SDMA_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000b0000)
+#define MX50_ROMCP_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000b8000)
+#define MX50_CSPI3_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c0000)
+#define MX50_I2C2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c4000)
+#define MX50_I2C1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c8000)
+#define MX50_SSI1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000cc000)
+#define MX50_AUDMUX_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000d0000)
+#define MX50_WEIM_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000d8000)
+#define MX50_FEC_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000ec000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX50_CSD0_BASE_ADDR		0x70000000
+#define MX50_CSD1_BASE_ADDR		0xb0000000
+#define MX50_CS0_BASE_ADDR		0xf0000000
+
+#define MX50_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX50_IO_ADDRESS(x)		IOMEM(MX50_IO_P2V(x))
+
+/*
+ * defines for SPBA modules
+ */
+#define MX50_SPBA_SDHC1		0x04
+#define MX50_SPBA_SDHC2		0x08
+#define MX50_SPBA_UART3		0x0c
+#define MX50_SPBA_CSPI1		0x10
+#define MX50_SPBA_SSI2		0x14
+#define MX50_SPBA_SDHC3		0x20
+#define MX50_SPBA_SDHC4		0x24
+#define MX50_SPBA_SPDIF		0x28
+#define MX50_SPBA_ATA		0x30
+#define MX50_SPBA_SLIM		0x34
+#define MX50_SPBA_HSI2C		0x38
+#define MX50_SPBA_CTRL		0x3c
+
+/*
+ * DMA request assignments
+ */
+#define MX50_DMA_REQ_GPC		1
+#define MX50_DMA_REQ_ATA_UART4_RX	2
+#define MX50_DMA_REQ_ATA_UART4_TX	3
+#define MX50_DMA_REQ_CSPI1_RX		6
+#define MX50_DMA_REQ_CSPI1_TX		7
+#define MX50_DMA_REQ_CSPI2_RX		8
+#define MX50_DMA_REQ_CSPI2_TX		9
+#define MX50_DMA_REQ_I2C3_SDHC3		10
+#define MX50_DMA_REQ_SDHC4		11
+#define MX50_DMA_REQ_UART2_FIRI_RX	12
+#define MX50_DMA_REQ_UART2_FIRI_TX	13
+#define MX50_DMA_REQ_EXT0		14
+#define MX50_DMA_REQ_EXT1		15
+#define MX50_DMA_REQ_UART5_RX		16
+#define MX50_DMA_REQ_UART5_TX		17
+#define MX50_DMA_REQ_UART1_RX		18
+#define MX50_DMA_REQ_UART1_TX		19
+#define MX50_DMA_REQ_I2C1_SDHC1		20
+#define MX50_DMA_REQ_I2C2_SDHC2		21
+#define MX50_DMA_REQ_SSI2_RX2		22
+#define MX50_DMA_REQ_SSI2_TX2		23
+#define MX50_DMA_REQ_SSI2_RX1		24
+#define MX50_DMA_REQ_SSI2_TX1		25
+#define MX50_DMA_REQ_SSI1_RX2		26
+#define MX50_DMA_REQ_SSI1_TX2		27
+#define MX50_DMA_REQ_SSI1_RX1		28
+#define MX50_DMA_REQ_SSI1_TX1		29
+#define MX50_DMA_REQ_CSPI_RX		38
+#define MX50_DMA_REQ_CSPI_TX		39
+#define MX50_DMA_REQ_UART3_RX		42
+#define MX50_DMA_REQ_UART3_TX		43
+
+/*
+ * Interrupt numbers
+ */
+#define MX50_INT_MMC_SDHC1	1
+#define MX50_INT_MMC_SDHC2	2
+#define MX50_INT_MMC_SDHC3	3
+#define MX50_INT_MMC_SDHC4	4
+#define MX50_INT_DAP		5
+#define MX50_INT_SDMA		6
+#define MX50_INT_IOMUX		7
+#define MX50_INT_UART4		13
+#define MX50_INT_USB_H1		14
+#define MX50_INT_USB_OTG	18
+#define MX50_INT_DATABAHN	19
+#define MX50_INT_ELCDIF		20
+#define MX50_INT_EPXP		21
+#define MX50_INT_SRTC_NTZ	24
+#define MX50_INT_SRTC_TZ	25
+#define MX50_INT_EPDC		27
+#define MX50_INT_NIC		28
+#define MX50_INT_SSI1		29
+#define MX50_INT_SSI2		30
+#define MX50_INT_UART1		31
+#define MX50_INT_UART2		32
+#define MX50_INT_UART3		33
+#define MX50_INT_RESV34		34
+#define MX50_INT_RESV35		35
+#define MX50_INT_CSPI1		36
+#define MX50_INT_CSPI2		37
+#define MX50_INT_CSPI		38
+#define MX50_INT_GPT		39
+#define MX50_INT_EPIT1		40
+#define MX50_INT_GPIO1_INT7	42
+#define MX50_INT_GPIO1_INT6	43
+#define MX50_INT_GPIO1_INT5	44
+#define MX50_INT_GPIO1_INT4	45
+#define MX50_INT_GPIO1_INT3	46
+#define MX50_INT_GPIO1_INT2	47
+#define MX50_INT_GPIO1_INT1	48
+#define MX50_INT_GPIO1_INT0	49
+#define MX50_INT_GPIO1_LOW	50
+#define MX50_INT_GPIO1_HIGH	51
+#define MX50_INT_GPIO2_LOW	52
+#define MX50_INT_GPIO2_HIGH	53
+#define MX50_INT_GPIO3_LOW	54
+#define MX50_INT_GPIO3_HIGH	55
+#define MX50_INT_GPIO4_LOW	56
+#define MX50_INT_GPIO4_HIGH	57
+#define MX50_INT_WDOG1		58
+#define MX50_INT_KPP		60
+#define MX50_INT_PWM1		61
+#define MX50_INT_I2C1		62
+#define MX50_INT_I2C2		63
+#define MX50_INT_I2C3		64
+#define MX50_INT_RESV65		65
+#define MX50_INT_DCDC		66
+#define MX50_INT_THERMAL_ALARM	67
+#define MX50_INT_ANA3		68
+#define MX50_INT_ANA4		69
+#define MX50_INT_CCM1		71
+#define MX50_INT_CCM2		72
+#define MX50_INT_GPC1		73
+#define MX50_INT_GPC2		74
+#define MX50_INT_SRC		75
+#define MX50_INT_NM		76
+#define MX50_INT_PMU		77
+#define MX50_INT_CTI_IRQ	78
+#define MX50_INT_CTI1_TG0	79
+#define MX50_INT_CTI1_TG1	80
+#define MX50_INT_GPU2_IRQ	84
+#define MX50_INT_GPU2_BUSY	85
+#define MX50_INT_UART5		86
+#define MX50_INT_FEC		87
+#define MX50_INT_OWIRE		88
+#define MX50_INT_CTI1_TG2	89
+#define MX50_INT_SJC		90
+#define MX50_INT_DCP_CHAN1_3	91
+#define MX50_INT_DCP_CHAN0	92
+#define MX50_INT_PWM2		94
+#define MX50_INT_RNGB		97
+#define MX50_INT_CTI1_TG3	98
+#define MX50_INT_RAWNAND_BCH	100
+#define MX50_INT_RAWNAND_GPMI	102
+#define MX50_INT_GPIO5_LOW	103
+#define MX50_INT_GPIO5_HIGH	104
+#define MX50_INT_GPIO6_LOW	105
+#define MX50_INT_GPIO6_HIGH	106
+#define MX50_INT_MSHC		109
+#define MX50_INT_APBHDMA_CHAN0	110
+#define MX50_INT_APBHDMA_CHAN1	111
+#define MX50_INT_APBHDMA_CHAN2	112
+#define MX50_INT_APBHDMA_CHAN3	113
+#define MX50_INT_APBHDMA_CHAN4	114
+#define MX50_INT_APBHDMA_CHAN5	115
+#define MX50_INT_APBHDMA_CHAN6	116
+#define MX50_INT_APBHDMA_CHAN7	117
+
+#endif /* ifndef __MACH_MX50_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 2af7a1056fc..873807f96d7 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -2,31 +2,6 @@
 #define __MACH_MX51_H__
 
 /*
- * MX51 memory map:
- *
- *
- * Virt		Phys		Size	What
- * ---------------------------------------------------------------------------
- * fa3e0000	1ffe0000	128K	IRAM (SCCv2 RAM)
- *         	30000000	256M	GPU
- *         	40000000	512M	IPU
- * fa200000	60000000	1M	DEBUG
- * fb100000	70000000	1M	SPBA 0
- * fb000000	73f00000	1M	AIPS 1
- * fb200000	83f00000	1M	AIPS 2
- *		8fffc000	16K	TZIC (interrupt controller)
- *         	90000000	256M	CSD0 SDRAM/DDR
- *         	a0000000	256M	CSD1 SDRAM/DDR
- *         	b0000000	128M	CS0 Flash
- *         	b8000000	128M	CS1 Flash
- *         	c0000000	128M	CS2 Flash
- *         	c8000000	64M	CS3 Flash
- *         	cc000000	32M	CS4 SRAM
- *         	ce000000	32M	CS5 SRAM
- *		cfff0000	64K	NFC (NAND Flash AXI)
- */
-
-/*
  * IROM
  */
 #define MX51_IROM_BASE_ADDR		0x0
@@ -36,7 +11,6 @@
  * IRAM
  */
 #define MX51_IRAM_BASE_ADDR		0x1ffe0000	/* internal ram */
-#define MX51_IRAM_BASE_ADDR_VIRT	0xfa3e0000
 #define MX51_IRAM_PARTITIONS		16
 #define MX51_IRAM_SIZE		(MX51_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
 
@@ -45,7 +19,6 @@
 #define MX51_IPU_CTRL_BASE_ADDR		0x40000000
 
 #define MX51_DEBUG_BASE_ADDR		0x60000000
-#define MX51_DEBUG_BASE_ADDR_VIRT	0xfa200000
 #define MX51_DEBUG_SIZE			SZ_1M
 
 #define MX51_ETB_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x01000)
@@ -61,7 +34,6 @@
  * SPBA global module enabled #0
  */
 #define MX51_SPBA0_BASE_ADDR		0x70000000
-#define MX51_SPBA0_BASE_ADDR_VIRT	0xfb100000
 #define MX51_SPBA0_SIZE			SZ_1M
 
 #define MX51_ESDHC1_BASE_ADDR		(MX51_SPBA0_BASE_ADDR + 0x04000)
@@ -81,7 +53,6 @@
  * AIPS 1
  */
 #define MX51_AIPS1_BASE_ADDR		0x73f00000
-#define MX51_AIPS1_BASE_ADDR_VIRT	0xfb000000
 #define MX51_AIPS1_SIZE			SZ_1M
 
 #define MX51_OTG_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x80000)
@@ -90,7 +61,7 @@
 #define MX51_GPIO3_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x8c000)
 #define MX51_GPIO4_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x90000)
 #define MX51_KPP_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x94000)
-#define MX51_WDOG_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x98000)
+#define MX51_WDOG1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x98000)
 #define MX51_WDOG2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x9c000)
 #define MX51_GPT1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa0000)
 #define MX51_SRTC_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0xa4000)
@@ -109,7 +80,6 @@
  * AIPS 2
  */
 #define MX51_AIPS2_BASE_ADDR		0x83f00000
-#define MX51_AIPS2_BASE_ADDR_VIRT	0xfb200000
 #define MX51_AIPS2_SIZE			SZ_1M
 
 #define MX51_PLL1_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0x80000)
@@ -139,7 +109,7 @@
 #define MX51_MIPI_HSC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xdc000)
 #define MX51_ATA_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe0000)
 #define MX51_SIM_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe4000)
-#define MX51_SSI3BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe8000)
+#define MX51_SSI3_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xe8000)
 #define MX51_FEC_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xec000)
 #define MX51_TVE_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf0000)
 #define MX51_VPU_BASE_ADDR		(MX51_AIPS2_BASE_ADDR + 0xf4000)
@@ -163,16 +133,8 @@
 #define MX51_GPU2D_BASE_ADDR		0xd0000000
 #define MX51_TZIC_BASE_ADDR		0xe0000000
 
-#define MX51_IO_ADDRESS(x) (						\
-	IMX_IO_ADDRESS(x, MX51_IRAM) ?:					\
-	IMX_IO_ADDRESS(x, MX51_DEBUG) ?:				\
-	IMX_IO_ADDRESS(x, MX51_SPBA0) ?:				\
-	IMX_IO_ADDRESS(x, MX51_AIPS1) ?:				\
-	IMX_IO_ADDRESS(x, MX51_AIPS2))
-
-/* This is currently used in <mach/debug-macro.S>, but should go away */
-#define MX51_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
+#define MX51_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX51_IO_ADDRESS(x)		IOMEM(MX51_IO_P2V(x))
 
 /*
  * defines for SPBA modules
@@ -261,9 +223,9 @@
 #define MX51_DMA_REQ_EMI_WR		32
 #define MX51_DMA_REQ_CTI2_1		33
 #define MX51_DMA_REQ_EPIT2		34
-#define MX51_DMA_REQ_SSI3_RX2		35
+#define MX51_DMA_REQ_SSI3_RX1		35
 #define MX51_DMA_REQ_IPU		36
-#define MX51_DMA_REQ_SSI3_TX2		37
+#define MX51_DMA_REQ_SSI3_TX1		37
 #define MX51_DMA_REQ_CSPI_RX		38
 #define MX51_DMA_REQ_CSPI_TX		39
 #define MX51_DMA_REQ_SDHC3		40
@@ -272,8 +234,8 @@
 #define MX51_DMA_REQ_UART3_RX		43
 #define MX51_DMA_REQ_UART3_TX		44
 #define MX51_DMA_REQ_SPDIF		45
-#define MX51_DMA_REQ_SSI3_RX1		46
-#define MX51_DMA_REQ_SSI3_TX1		47
+#define MX51_DMA_REQ_SSI3_RX0		46
+#define MX51_DMA_REQ_SSI3_TX0		47
 
 /*
  * Interrupt numbers
@@ -289,8 +251,8 @@
 #define MX51_MXC_INT_IOMUX		7
 #define MX51_INT_NFC			8
 #define MX51_MXC_INT_VPU		9
-#define MX51_MXC_INT_IPU_ERR		10
-#define MX51_MXC_INT_IPU_SYN		11
+#define MX51_INT_IPU_ERR		10
+#define MX51_INT_IPU_SYN		11
 #define MX51_MXC_INT_GPU		12
 #define MX51_MXC_INT_RESV13		13
 #define MX51_MXC_INT_USB_H1		14
@@ -375,7 +337,7 @@
 #define MX51_MXC_INT_FIRI		93
 #define MX51_MXC_INT_PWM2		94
 #define MX51_MXC_INT_SLIM_EXP		95
-#define MX51_MXC_INT_SSI3		96
+#define MX51_INT_SSI3			96
 #define MX51_MXC_INT_EMI_BOOT		97
 #define MX51_MXC_INT_CTI1_TG3		98
 #define MX51_MXC_INT_SMC_RX		99
@@ -383,19 +345,6 @@
 #define MX51_MXC_INT_EMI_NFC		101
 #define MX51_MXC_INT_GPU_IDLE		102
 
-/* silicon revisions specific to i.MX51 */
-#define MX51_CHIP_REV_1_0		0x10
-#define MX51_CHIP_REV_1_1		0x11
-#define MX51_CHIP_REV_1_2		0x12
-#define MX51_CHIP_REV_1_3		0x13
-#define MX51_CHIP_REV_2_0		0x20
-#define MX51_CHIP_REV_2_1		0x21
-#define MX51_CHIP_REV_2_2		0x22
-#define MX51_CHIP_REV_2_3		0x23
-#define MX51_CHIP_REV_3_0		0x30
-#define MX51_CHIP_REV_3_1		0x31
-#define MX51_CHIP_REV_3_2		0x32
-
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 extern int mx51_revision(void);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
new file mode 100644
index 00000000000..9577cdbf7fa
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -0,0 +1,353 @@
+#ifndef __MACH_MX53_H__
+#define __MACH_MX53_H__
+
+/*
+ * IROM
+ */
+#define MX53_IROM_BASE_ADDR		0x0
+#define MX53_IROM_SIZE			SZ_64K
+
+/* TZIC */
+#define MX53_TZIC_BASE_ADDR		0x0FFFC000
+
+/*
+ * AHCI SATA
+ */
+#define MX53_SATA_BASE_ADDR		0x10000000
+
+/*
+ * NFC
+ */
+#define MX53_NFC_AXI_BASE_ADDR	0xF7FF0000	/* NAND flash AXI */
+#define MX53_NFC_AXI_SIZE		SZ_64K
+
+/*
+ * IRAM
+ */
+#define MX53_IRAM_BASE_ADDR	0xF8000000	/* internal ram */
+#define MX53_IRAM_PARTITIONS	16
+#define MX53_IRAM_SIZE		(MX53_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
+
+/*
+ * Graphics Memory of GPU
+ */
+#define MX53_IPU_CTRL_BASE_ADDR	0x18000000
+#define MX53_GPU2D_BASE_ADDR		0x20000000
+#define MX53_GPU_BASE_ADDR		0x30000000
+#define MX53_GPU_GMEM_BASE_ADDR	0xF8020000
+
+#define MX53_DEBUG_BASE_ADDR		0x40000000
+#define MX53_DEBUG_SIZE		SZ_1M
+#define MX53_ETB_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00001000)
+#define MX53_ETM_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00002000)
+#define MX53_TPIU_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00003000)
+#define MX53_CTI0_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00004000)
+#define MX53_CTI1_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00005000)
+#define MX53_CTI2_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00006000)
+#define MX53_CTI3_BASE_ADDR		(MX53_DEBUG_BASE_ADDR + 0x00007000)
+#define MX53_CORTEX_DBG_BASE_ADDR	(MX53_DEBUG_BASE_ADDR + 0x00008000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define MX53_SPBA0_BASE_ADDR		0x50000000
+#define MX53_SPBA0_SIZE		SZ_1M
+
+#define MX53_MMC_SDHC1_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00004000)
+#define MX53_MMC_SDHC2_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00008000)
+#define MX53_UART3_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x0000C000)
+#define MX53_CSPI1_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00010000)
+#define MX53_SSI2_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00014000)
+#define MX53_MMC_SDHC3_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00020000)
+#define MX53_MMC_SDHC4_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00024000)
+#define MX53_SPDIF_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x00028000)
+#define MX53_ASRC_BASE_ADDR		(MX53_SPBA0_BASE_ADDR + 0x0002C000)
+#define MX53_ATA_DMA_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00030000)
+#define MX53_SLIM_DMA_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00034000)
+#define MX53_HSI2C_DMA_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x00038000)
+#define MX53_SPBA_CTRL_BASE_ADDR	(MX53_SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 1
+ */
+#define MX53_AIPS1_BASE_ADDR	0x53F00000
+#define MX53_AIPS1_SIZE		SZ_1M
+
+#define MX53_OTG_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00080000)
+#define MX53_GPIO1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00084000)
+#define MX53_GPIO2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00088000)
+#define MX53_GPIO3_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x0008C000)
+#define MX53_GPIO4_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00090000)
+#define MX53_KPP_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00094000)
+#define MX53_WDOG_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x00098000)
+#define MX53_WDOG2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x0009C000)
+#define MX53_GPT1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000A0000)
+#define MX53_SRTC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000A4000)
+#define MX53_IOMUXC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000A8000)
+#define MX53_EPIT1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000AC000)
+#define MX53_EPIT2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000B0000)
+#define MX53_PWM1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000B4000)
+#define MX53_PWM2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000B8000)
+#define MX53_UART1_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000BC000)
+#define MX53_UART2_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000C0000)
+#define MX53_SRC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000D0000)
+#define MX53_CCM_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000D4000)
+#define MX53_GPC_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000D8000)
+#define MX53_GPIO5_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000DC000)
+#define MX53_GPIO6_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000E0000)
+#define MX53_GPIO7_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000E4000)
+#define MX53_ATA_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000E8000)
+#define MX53_I2C3_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000EC000)
+#define MX53_UART4_BASE_ADDR	(MX53_AIPS1_BASE_ADDR + 0x000F0000)
+
+/*
+ * AIPS 2
+ */
+#define MX53_AIPS2_BASE_ADDR		0x63F00000
+#define MX53_AIPS2_SIZE			SZ_1M
+
+#define MX53_PLL1_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00080000)
+#define MX53_PLL2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00084000)
+#define MX53_PLL3_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00088000)
+#define MX53_PLL4_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x0008C000)
+#define MX53_UART5_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00090000)
+#define MX53_AHBMAX_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00094000)
+#define MX53_IIM_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x00098000)
+#define MX53_CSU_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x0009C000)
+#define MX53_ARM_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A0000)
+#define MX53_OWIRE_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A4000)
+#define MX53_FIRI_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000A8000)
+#define MX53_CSPI2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000AC000)
+#define MX53_SDMA_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B0000)
+#define MX53_SCC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B4000)
+#define MX53_ROMCP_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000B8000)
+#define MX53_RTIC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000BC000)
+#define MX53_CSPI3_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C0000)
+#define MX53_I2C2_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C4000)
+#define MX53_I2C1_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000C8000)
+#define MX53_SSI1_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000CC000)
+#define MX53_AUDMUX_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000D0000)
+#define MX53_RTC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000D4000)
+#define MX53_M4IF_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000D8000)
+#define MX53_ESDCTL_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000D9000)
+#define MX53_WEIM_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000DA000)
+#define MX53_NFC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000DB000)
+#define MX53_EMI_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000DBF00)
+#define MX53_MIPI_HSC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000DC000)
+#define MX53_MLB_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000E4000)
+#define MX53_SSI3_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000E8000)
+#define MX53_MXC_FEC_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000EC000)
+#define MX53_TVE_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000F0000)
+#define MX53_VPU_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000F4000)
+#define MX53_SAHARA_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000F8000)
+#define MX53_PTP_BASE_ADDR	(MX53_AIPS2_BASE_ADDR + 0x000FC000)
+
+/*
+ * Memory regions and CS
+ */
+#define MX53_CSD0_BASE_ADDR		0x90000000
+#define MX53_CSD1_BASE_ADDR		0xA0000000
+#define MX53_CS0_BASE_ADDR		0xB0000000
+#define MX53_CS1_BASE_ADDR		0xB8000000
+#define MX53_CS2_BASE_ADDR		0xC0000000
+#define MX53_CS3_BASE_ADDR		0xC8000000
+#define MX53_CS4_BASE_ADDR		0xCC000000
+#define MX53_CS5_BASE_ADDR		0xCE000000
+
+#define MX53_IO_P2V(x)			IMX_IO_P2V(x)
+#define MX53_IO_ADDRESS(x)		IOMEM(MX53_IO_P2V(x))
+
+/*
+ * defines for SPBA modules
+ */
+#define MX53_SPBA_SDHC1	0x04
+#define MX53_SPBA_SDHC2	0x08
+#define MX53_SPBA_UART3	0x0C
+#define MX53_SPBA_CSPI1	0x10
+#define MX53_SPBA_SSI2		0x14
+#define MX53_SPBA_SDHC3	0x20
+#define MX53_SPBA_SDHC4	0x24
+#define MX53_SPBA_SPDIF	0x28
+#define MX53_SPBA_ATA		0x30
+#define MX53_SPBA_SLIM		0x34
+#define MX53_SPBA_HSI2C	0x38
+#define MX53_SPBA_CTRL		0x3C
+
+/*
+ * DMA request assignments
+ */
+#define MX53_DMA_REQ_SSI3_TX1		47
+#define MX53_DMA_REQ_SSI3_RX1		46
+#define MX53_DMA_REQ_SSI3_TX2		45
+#define MX53_DMA_REQ_SSI3_RX2		44
+#define MX53_DMA_REQ_UART3_TX	43
+#define MX53_DMA_REQ_UART3_RX	42
+#define MX53_DMA_REQ_ESAI_TX		41
+#define MX53_DMA_REQ_ESAI_RX		40
+#define MX53_DMA_REQ_CSPI_TX		39
+#define MX53_DMA_REQ_CSPI_RX		38
+#define MX53_DMA_REQ_ASRC_DMA6	37
+#define MX53_DMA_REQ_ASRC_DMA5	36
+#define MX53_DMA_REQ_ASRC_DMA4	35
+#define MX53_DMA_REQ_ASRC_DMA3	34
+#define MX53_DMA_REQ_ASRC_DMA2	33
+#define MX53_DMA_REQ_ASRC_DMA1	32
+#define MX53_DMA_REQ_EMI_WR		31
+#define MX53_DMA_REQ_EMI_RD		30
+#define MX53_DMA_REQ_SSI1_TX1		29
+#define MX53_DMA_REQ_SSI1_RX1		28
+#define MX53_DMA_REQ_SSI1_TX2		27
+#define MX53_DMA_REQ_SSI1_RX2		26
+#define MX53_DMA_REQ_SSI2_TX1		25
+#define MX53_DMA_REQ_SSI2_RX1		24
+#define MX53_DMA_REQ_SSI2_TX2		23
+#define MX53_DMA_REQ_SSI2_RX2		22
+#define MX53_DMA_REQ_I2C2_SDHC2	21
+#define MX53_DMA_REQ_I2C1_SDHC1	20
+#define MX53_DMA_REQ_UART1_TX	19
+#define MX53_DMA_REQ_UART1_RX	18
+#define MX53_DMA_REQ_UART5_TX	17
+#define MX53_DMA_REQ_UART5_RX	16
+#define MX53_DMA_REQ_SPDIF_TX		15
+#define MX53_DMA_REQ_SPDIF_RX		14
+#define MX53_DMA_REQ_UART2_FIRI_TX	13
+#define MX53_DMA_REQ_UART2_FIRI_RX	12
+#define MX53_DMA_REQ_SDHC4		11
+#define MX53_DMA_REQ_I2C3_SDHC3	10
+#define MX53_DMA_REQ_CSPI2_TX		9
+#define MX53_DMA_REQ_CSPI2_RX		8
+#define MX53_DMA_REQ_CSPI1_TX		7
+#define MX53_DMA_REQ_CSPI1_RX		6
+#define MX53_DMA_REQ_IPU		5
+#define MX53_DMA_REQ_ATA_TX_END	4
+#define MX53_DMA_REQ_ATA_UART4_TX	3
+#define MX53_DMA_REQ_ATA_UART4_RX	2
+#define MX53_DMA_REQ_GPC		1
+#define MX53_DMA_REQ_VPU		0
+
+/*
+ * Interrupt numbers
+ */
+#define MX53_INT_RESV0		0
+#define MX53_INT_MMC_SDHC1	1
+#define MX53_INT_MMC_SDHC2	2
+#define MX53_INT_MMC_SDHC3	3
+#define MX53_INT_MMC_SDHC4	4
+#define MX53_INT_RESV5	5
+#define MX53_INT_SDMA	6
+#define MX53_INT_IOMUX	7
+#define MX53_INT_NFC	8
+#define MX53_INT_VPU	9
+#define MX53_INT_IPU_ERR	10
+#define MX53_INT_IPU_SYN	11
+#define MX53_INT_GPU	12
+#define MX53_INT_RESV13	13
+#define MX53_INT_USB_H1	14
+#define MX53_INT_EMI	15
+#define MX53_INT_USB_H2	16
+#define MX53_INT_USB_H3	17
+#define MX53_INT_USB_OTG	18
+#define MX53_INT_SAHARA_H0	19
+#define MX53_INT_SAHARA_H1	20
+#define MX53_INT_SCC_SMN	21
+#define MX53_INT_SCC_STZ	22
+#define MX53_INT_SCC_SCM	23
+#define MX53_INT_SRTC_NTZ	24
+#define MX53_INT_SRTC_TZ	25
+#define MX53_INT_RTIC	26
+#define MX53_INT_CSU	27
+#define MX53_INT_SATA	28
+#define MX53_INT_SSI1	29
+#define MX53_INT_SSI2	30
+#define MX53_INT_UART1	31
+#define MX53_INT_UART2	32
+#define MX53_INT_UART3	33
+#define MX53_INT_RESV34	34
+#define MX53_INT_RESV35	35
+#define MX53_INT_CSPI1	36
+#define MX53_INT_CSPI2	37
+#define MX53_INT_CSPI	38
+#define MX53_INT_GPT	39
+#define MX53_INT_EPIT1	40
+#define MX53_INT_EPIT2	41
+#define MX53_INT_GPIO1_INT7	42
+#define MX53_INT_GPIO1_INT6	43
+#define MX53_INT_GPIO1_INT5	44
+#define MX53_INT_GPIO1_INT4	45
+#define MX53_INT_GPIO1_INT3	46
+#define MX53_INT_GPIO1_INT2	47
+#define MX53_INT_GPIO1_INT1	48
+#define MX53_INT_GPIO1_INT0	49
+#define MX53_INT_GPIO1_LOW	50
+#define MX53_INT_GPIO1_HIGH	51
+#define MX53_INT_GPIO2_LOW	52
+#define MX53_INT_GPIO2_HIGH	53
+#define MX53_INT_GPIO3_LOW	54
+#define MX53_INT_GPIO3_HIGH	55
+#define MX53_INT_GPIO4_LOW	56
+#define MX53_INT_GPIO4_HIGH	57
+#define MX53_INT_WDOG1	58
+#define MX53_INT_WDOG2	59
+#define MX53_INT_KPP	60
+#define MX53_INT_PWM1	61
+#define MX53_INT_I2C1	62
+#define MX53_INT_I2C2	63
+#define MX53_INT_I2C3	64
+#define MX53_INT_RESV65	65
+#define MX53_INT_RESV66	66
+#define MX53_INT_SPDIF	67
+#define MX53_INT_SIM_DAT	68
+#define MX53_INT_IIM	69
+#define MX53_INT_ATA	70
+#define MX53_INT_CCM1	71
+#define MX53_INT_CCM2	72
+#define MX53_INT_GPC1	73
+#define MX53_INT_GPC2	74
+#define MX53_INT_SRC	75
+#define MX53_INT_NM		76
+#define MX53_INT_PMU	77
+#define MX53_INT_CTI_IRQ	78
+#define MX53_INT_CTI1_TG0	79
+#define MX53_INT_CTI1_TG1	80
+#define MX53_INT_ESAI	81
+#define MX53_INT_CAN1	82
+#define MX53_INT_CAN2	83
+#define MX53_INT_GPU2_IRQ	84
+#define MX53_INT_GPU2_BUSY	85
+#define MX53_INT_RESV86	86
+#define MX53_INT_FEC	87
+#define MX53_INT_OWIRE	88
+#define MX53_INT_CTI1_TG2	89
+#define MX53_INT_SJC	90
+#define MX53_INT_TVE	92
+#define MX53_INT_FIRI	93
+#define MX53_INT_PWM2	94
+#define MX53_INT_SLIM_EXP	95
+#define MX53_INT_SSI3	96
+#define MX53_INT_EMI_BOOT	97
+#define MX53_INT_CTI1_TG3	98
+#define MX53_INT_SMC_RX	99
+#define MX53_INT_VPU_IDLE	100
+#define MX53_INT_EMI_NFC	101
+#define MX53_INT_GPU_IDLE	102
+#define MX53_INT_GPIO5_LOW	103
+#define MX53_INT_GPIO5_HIGH	104
+#define MX53_INT_GPIO6_LOW	105
+#define MX53_INT_GPIO6_HIGH	106
+#define MX53_INT_GPIO7_LOW	107
+#define MX53_INT_GPIO7_HIGH	108
+
+/* silicon revisions specific to i.MX53 */
+#define MX53_CHIP_REV_1_0		0x10
+#define MX53_CHIP_REV_1_1		0x11
+#define MX53_CHIP_REV_1_2		0x12
+#define MX53_CHIP_REV_1_3		0x13
+#define MX53_CHIP_REV_2_0		0x20
+#define MX53_CHIP_REV_2_1		0x21
+#define MX53_CHIP_REV_2_2		0x22
+#define MX53_CHIP_REV_2_3		0x23
+#define MX53_CHIP_REV_3_0		0x30
+#define MX53_CHIP_REV_3_1		0x31
+#define MX53_CHIP_REV_3_2		0x32
+
+#endif /* ifndef __MACH_MX53_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index a42c7207082..04c7a26b1f2 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -32,9 +32,25 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
+#define MXC_CPU_MX50		50
 #define MXC_CPU_MX51		51
+#define MXC_CPU_MX53		53
 #define MXC_CPU_MXC91231	91231
 
+#define IMX_CHIP_REVISION_1_0		0x10
+#define IMX_CHIP_REVISION_1_1		0x11
+#define IMX_CHIP_REVISION_1_2		0x12
+#define IMX_CHIP_REVISION_1_3		0x13
+#define IMX_CHIP_REVISION_2_0		0x20
+#define IMX_CHIP_REVISION_2_1		0x21
+#define IMX_CHIP_REVISION_2_2		0x22
+#define IMX_CHIP_REVISION_2_3		0x23
+#define IMX_CHIP_REVISION_3_0		0x30
+#define IMX_CHIP_REVISION_3_1		0x31
+#define IMX_CHIP_REVISION_3_2		0x32
+#define IMX_CHIP_REVISION_3_3		0x33
+#define IMX_CHIP_REVISION_UNKNOWN	0xff
+
 #ifndef __ASSEMBLY__
 extern unsigned int __mxc_cpu_type;
 #endif
@@ -111,7 +127,19 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()		(0)
 #endif
 
-#ifdef CONFIG_ARCH_MX5
+#ifdef CONFIG_ARCH_MX50
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX50
+# endif
+# define cpu_is_mx50()		(mxc_cpu_type == MXC_CPU_MX50)
+#else
+# define cpu_is_mx50()		(0)
+#endif
+
+#ifdef CONFIG_ARCH_MX51
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
@@ -123,6 +151,18 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx51()		(0)
 #endif
 
+#ifdef CONFIG_ARCH_MX53
+# ifdef mxc_cpu_type
+#  undef mxc_cpu_type
+#  define mxc_cpu_type __mxc_cpu_type
+# else
+#  define mxc_cpu_type MXC_CPU_MX53
+# endif
+# define cpu_is_mx53()		(mxc_cpu_type == MXC_CPU_MX53)
+#else
+# define cpu_is_mx53()		(0)
+#endif
+
 #ifdef CONFIG_ARCH_MXC91231
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h
index 0ca3101ebf3..765190fe633 100644
--- a/arch/arm/plat-mxc/include/mach/mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/mxc91231.h
@@ -21,14 +21,12 @@
  * L2CC
  */
 #define MXC91231_L2CC_BASE_ADDR		0x30000000
-#define MXC91231_L2CC_BASE_ADDR_VIRT	0xF9000000
 #define MXC91231_L2CC_SIZE		SZ_64K
 
 /*
  * AIPS 1
  */
 #define MXC91231_AIPS1_BASE_ADDR	0x43F00000
-#define MXC91231_AIPS1_BASE_ADDR_VIRT	0xFC000000
 #define MXC91231_AIPS1_SIZE		SZ_1M
 
 #define MXC91231_AIPS1_CTRL_BASE_ADDR	MXC91231_AIPS1_BASE_ADDR
@@ -53,7 +51,6 @@
  * AIPS 2
  */
 #define MXC91231_AIPS2_BASE_ADDR	0x53F00000
-#define MXC91231_AIPS2_BASE_ADDR_VIRT	0xFC100000
 #define MXC91231_AIPS2_SIZE		SZ_1M
 
 #define MXC91231_GEMK_BASE_ADDR		(MXC91231_AIPS2_BASE_ADDR + 0x8C000)
@@ -79,7 +76,6 @@
  * SPBA global module 0
  */
 #define MXC91231_SPBA0_BASE_ADDR	0x50000000
-#define MXC91231_SPBA0_BASE_ADDR_VIRT	0xFC200000
 #define MXC91231_SPBA0_SIZE		SZ_1M
 
 #define MXC91231_MMC_SDHC1_BASE_ADDR	(MXC91231_SPBA0_BASE_ADDR + 0x04000)
@@ -109,7 +105,6 @@
  * SPBA global module 1
  */
 #define MXC91231_SPBA1_BASE_ADDR	0x52000000
-#define MXC91231_SPBA1_BASE_ADDR_VIRT	0xFC300000
 #define MXC91231_SPBA1_SIZE		SZ_1M
 
 #define MXC91231_MQSPI_BASE_ADDR	(MXC91231_SPBA1_BASE_ADDR + 0x34000)
@@ -144,18 +139,15 @@
  * ROMP and AVIC
  */
 #define MXC91231_ROMP_BASE_ADDR		0x60000000
-#define MXC91231_ROMP_BASE_ADDR_VIRT	0xFC400000
 #define MXC91231_ROMP_SIZE		SZ_64K
 
 #define MXC91231_AVIC_BASE_ADDR		0x68000000
-#define MXC91231_AVIC_BASE_ADDR_VIRT	0xFC410000
 #define MXC91231_AVIC_SIZE		SZ_64K
 
 /*
  * NAND, SDRAM, WEIM, M3IF, EMI controllers
  */
 #define MXC91231_X_MEMC_BASE_ADDR	0xB8000000
-#define MXC91231_X_MEMC_BASE_ADDR_VIRT	0xFC420000
 #define MXC91231_X_MEMC_SIZE		SZ_64K
 
 #define MXC91231_NFC_BASE_ADDR		(MXC91231_X_MEMC_BASE_ADDR + 0x0000)
@@ -183,19 +175,10 @@
 /*
  * This macro defines the physical to virtual address mapping for all the
  * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address. If the physical address is not mapped,
- * it returns 0.
+ * and returning the virtual address.
  */
-
-#define MXC91231_IO_ADDRESS(x) (					\
-	IMX_IO_ADDRESS(x, MXC91231_L2CC) ?:				\
-	IMX_IO_ADDRESS(x, MXC91231_X_MEMC) ?:				\
-	IMX_IO_ADDRESS(x, MXC91231_ROMP) ?:				\
-	IMX_IO_ADDRESS(x, MXC91231_AVIC) ?:				\
-	IMX_IO_ADDRESS(x, MXC91231_AIPS1) ?:				\
-	IMX_IO_ADDRESS(x, MXC91231_SPBA0) ?:				\
-	IMX_IO_ADDRESS(x, MXC91231_SPBA1) ?:				\
-	IMX_IO_ADDRESS(x, MXC91231_AIPS2))
+#define MXC91231_IO_P2V(x)		IMX_IO_P2V(x)
+#define MXC91231_IO_ADDRESS(x)		IOMEM(MXC91231_IO_P2V(x))
 
 /*
  * Interrupt numbers
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index 7fc5f994619..a523a407929 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -31,6 +31,7 @@
 #define MXC_USBCTRL_OFFSET		0
 #define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
 #define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
+#define MXC_USBH2CTRL_OFFSET		0x14
 
 #define MX5_USBOTHER_REGS_OFFSET	0x800
 
diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h
index 9be112227ac..913e0432e40 100644
--- a/arch/arm/plat-mxc/include/mach/sdma.h
+++ b/arch/arm/plat-mxc/include/mach/sdma.h
@@ -2,16 +2,62 @@
 #define __MACH_MXC_SDMA_H__
 
 /**
+ * struct sdma_script_start_addrs - SDMA script start pointers
+ *
+ * start addresses of the different functions in the physical
+ * address space of the SDMA engine.
+ */
+struct sdma_script_start_addrs {
+	s32 ap_2_ap_addr;
+	s32 ap_2_bp_addr;
+	s32 ap_2_ap_fixed_addr;
+	s32 bp_2_ap_addr;
+	s32 loopback_on_dsp_side_addr;
+	s32 mcu_interrupt_only_addr;
+	s32 firi_2_per_addr;
+	s32 firi_2_mcu_addr;
+	s32 per_2_firi_addr;
+	s32 mcu_2_firi_addr;
+	s32 uart_2_per_addr;
+	s32 uart_2_mcu_addr;
+	s32 per_2_app_addr;
+	s32 mcu_2_app_addr;
+	s32 per_2_per_addr;
+	s32 uartsh_2_per_addr;
+	s32 uartsh_2_mcu_addr;
+	s32 per_2_shp_addr;
+	s32 mcu_2_shp_addr;
+	s32 ata_2_mcu_addr;
+	s32 mcu_2_ata_addr;
+	s32 app_2_per_addr;
+	s32 app_2_mcu_addr;
+	s32 shp_2_per_addr;
+	s32 shp_2_mcu_addr;
+	s32 mshc_2_mcu_addr;
+	s32 mcu_2_mshc_addr;
+	s32 spdif_2_mcu_addr;
+	s32 mcu_2_spdif_addr;
+	s32 asrc_2_mcu_addr;
+	s32 ext_mem_2_ipu_addr;
+	s32 descrambler_addr;
+	s32 dptc_dvfs_addr;
+	s32 utra_addr;
+	s32 ram_code_start_addr;
+};
+
+/**
  * struct sdma_platform_data - platform specific data for SDMA engine
  *
  * @sdma_version	The version of this SDMA engine
  * @cpu_name		used to generate the firmware name
  * @to_version		CPU Tape out version
+ * @script_addrs	SDMA scripts addresses in SDMA ROM
  */
 struct sdma_platform_data {
 	int sdma_version;
 	char *cpu_name;
 	int to_version;
+	struct sdma_script_start_addrs *script_addrs;
 };
 
 #endif /* __MACH_MXC_SDMA_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 9dd9c2085aa..3a70ebf0477 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -63,6 +63,8 @@ static inline void flush(void)
 #define MX3X_UART1_BASE_ADDR	0x43F90000
 #define MX3X_UART2_BASE_ADDR	0x43F94000
 #define MX51_UART1_BASE_ADDR	0x73fbc000
+#define MX50_UART1_BASE_ADDR	0x53fbc000
+#define MX53_UART1_BASE_ADDR	0x53fbc000
 
 static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 {
@@ -102,6 +104,12 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_EUKREA_CPUIMX51SD:
 		uart_base = MX51_UART1_BASE_ADDR;
 		break;
+	case MACH_TYPE_MX50_RDP:
+		uart_base = MX50_UART1_BASE_ADDR;
+		break;
+	case MACH_TYPE_MX53_EVK:
+		uart_base = MX53_UART1_BASE_ADDR;
+		break;
 	default:
 		break;
 	}
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index b318c6a222d..99a9cdb9d6b 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -32,31 +32,38 @@
 static void __iomem *base;
 
 /*
- * setups a single pad in the iomuxer
+ * configures a single pad in the iomuxer
  */
-int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 {
-	if (pad->mux_ctrl_ofs)
-		__raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
+	u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT;
+	u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
+	u32 sel_input_ofs = (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT;
+	u32 sel_input = (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT;
+	u32 pad_ctrl_ofs = (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
+	u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
 
-	if (pad->select_input_ofs)
-		__raw_writel(pad->select_input,
-				base + pad->select_input_ofs);
+	if (mux_ctrl_ofs)
+		__raw_writel(mux_mode, base + mux_ctrl_ofs);
+
+	if (sel_input_ofs)
+		__raw_writel(sel_input, base + sel_input_ofs);
+
+	if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs)
+		__raw_writel(pad_ctrl, base + pad_ctrl_ofs);
 
-	if (!(pad->pad_ctrl & NO_PAD_CTRL) && pad->pad_ctrl_ofs)
-		__raw_writel(pad->pad_ctrl, base + pad->pad_ctrl_ofs);
 	return 0;
 }
 EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
 
-int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
 {
-	struct pad_desc *p = pad_list;
+	iomux_v3_cfg_t *p = pad_list;
 	int i;
 	int ret;
 
 	for (i = 0; i < count; i++) {
-		ret = mxc_iomux_v3_setup_pad(p);
+		ret = mxc_iomux_v3_setup_pad(*p);
 		if (ret)
 			return ret;
 		p++;
diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c
new file mode 100644
index 00000000000..0c799ac2773
--- /dev/null
+++ b/arch/arm/plat-mxc/irq-common.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) BitBox Ltd 2010
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+
+#include "irq-common.h"
+
+int imx_irq_set_priority(unsigned char irq, unsigned char prio)
+{
+	struct mxc_irq_chip *chip;
+	struct irq_chip *base;
+	int ret;
+
+	ret = -ENOSYS;
+
+	base = get_irq_chip(irq);
+	if (base) {
+		chip = container_of(base, struct mxc_irq_chip, base);
+		if (chip->set_priority)
+			ret = chip->set_priority(irq, prio);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(imx_irq_set_priority);
+
+int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+	struct mxc_irq_chip *chip;
+	struct irq_chip *base;
+	int ret;
+
+	ret = -ENOSYS;
+
+	base = get_irq_chip(irq);
+	if (base) {
+		chip = container_of(base, struct mxc_irq_chip, base);
+		if (chip->set_irq_fiq)
+			ret = chip->set_irq_fiq(irq, type);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(mxc_set_irq_fiq);
diff --git a/arch/arm/plat-mxc/irq-common.h b/arch/arm/plat-mxc/irq-common.h
new file mode 100644
index 00000000000..7203543fb1b
--- /dev/null
+++ b/arch/arm/plat-mxc/irq-common.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) BitBox Ltd 2010
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __PLAT_MXC_IRQ_COMMON_H__
+#define __PLAT_MXC_IRQ_COMMON_H__
+
+struct mxc_irq_chip
+{
+	struct irq_chip	base;
+	int (*set_priority)(unsigned char irq, unsigned char prio);
+	int (*set_irq_fiq)(unsigned int irq, unsigned int type);
+};
+
+#endif
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 925bce4607e..3455fc0575a 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -26,6 +26,7 @@
 #include <mach/common.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
+#include <asm/mach-types.h>
 
 static void __iomem *wdog_base;
 
@@ -42,12 +43,19 @@ void arch_reset(char mode, const char *cmd)
 		return;
 	}
 #endif
+#ifdef CONFIG_MACH_MX51_EFIKAMX
+	if (machine_is_mx51_efikamx()) {
+		mx51_efikamx_reset();
+		return;
+	}
+#endif
+
 	if (cpu_is_mx1()) {
 		wcr_enable = (1 << 0);
 	} else {
 		struct clk *clk;
 
-		clk = clk_get_sys("imx-wdt.0", NULL);
+		clk = clk_get_sys("imx2-wdt.0", NULL);
 		if (!IS_ERR(clk))
 			clk_enable(clk);
 		wcr_enable = (1 << 2);
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index f9a1b059a76..9f0c2610595 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -120,7 +120,6 @@ static struct clocksource clocksource_mxc = {
 	.rating		= 200,
 	.read		= mx1_2_get_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift 		= 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -131,9 +130,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
 	if (timer_is_v2())
 		clocksource_mxc.read = v2_get_cycles;
 
-	clocksource_mxc.mult = clocksource_hz2mult(c,
-					clocksource_mxc.shift);
-	clocksource_register(&clocksource_mxc);
+	clocksource_register_hz(&clocksource_mxc, c);
 
 	return 0;
 }
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 3703ab28257..e69ed8a8c20 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -21,6 +21,8 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 
+#include "irq-common.h"
+
 /*
  *****************************************
  * TZIC Registers                        *
@@ -47,6 +49,25 @@
 
 void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
 
+#ifdef CONFIG_FIQ
+static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+	unsigned int index, mask, value;
+
+	index = irq >> 5;
+	if (unlikely(index >= 4))
+		return -EINVAL;
+	mask = 1U << (irq & 0x1F);
+
+	value = __raw_readl(tzic_base + TZIC_INTSEC0(index)) | mask;
+	if (type)
+		value &= ~mask;
+	__raw_writel(value, tzic_base + TZIC_INTSEC0(index));
+
+	return 0;
+}
+#endif
+
 /**
  * tzic_mask_irq() - Disable interrupt number "irq" in the TZIC
  *
@@ -104,12 +125,17 @@ static int tzic_set_wake_irq(unsigned int irq, unsigned int enable)
 	return 0;
 }
 
-static struct irq_chip mxc_tzic_chip = {
-	.name = "MXC_TZIC",
-	.ack = tzic_mask_irq,
-	.mask = tzic_mask_irq,
-	.unmask = tzic_unmask_irq,
-	.set_wake = tzic_set_wake_irq,
+static struct mxc_irq_chip mxc_tzic_chip = {
+	.base = {
+		.name = "MXC_TZIC",
+		.ack = tzic_mask_irq,
+		.mask = tzic_mask_irq,
+		.unmask = tzic_unmask_irq,
+		.set_wake = tzic_set_wake_irq,
+	},
+#ifdef CONFIG_FIQ
+	.set_irq_fiq = tzic_set_irq_fiq,
+#endif
 };
 
 /*
@@ -141,10 +167,16 @@ void __init tzic_init_irq(void __iomem *irqbase)
 	/* all IRQ no FIQ Warning :: No selection */
 
 	for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
-		set_irq_chip(i, &mxc_tzic_chip);
+		set_irq_chip(i, &mxc_tzic_chip.base);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID);
 	}
+
+#ifdef CONFIG_FIQ
+	/* Initialize FIQ */
+	init_FIQ();
+#endif
+
 	pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
 }
 
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
index 5da3f97c537..187f4e84bb2 100644
--- a/arch/arm/plat-nomadik/Kconfig
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -14,6 +14,7 @@ if PLAT_NOMADIK
 
 config HAS_MTU
 	bool
+	select HAVE_SCHED_CLOCK
 	help
 	  Support for Multi Timer Unit. MTU provides access
 	  to multiple interrupt generating programmable
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 85e6fd212a4..eda4e3a11a3 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -119,7 +119,7 @@ static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip,
 }
 
 static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
-			     pin_cfg_t cfg)
+			     pin_cfg_t cfg, bool sleep)
 {
 	static const char *afnames[] = {
 		[NMK_GPIO_ALT_GPIO]	= "GPIO",
@@ -145,11 +145,34 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
 	int output = PIN_DIR(cfg);
 	int val = PIN_VAL(cfg);
 
-	dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n",
-		pin, afnames[af], pullnames[pull], slpmnames[slpm],
+	dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n",
+		pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm],
 		output ? "output " : "input",
 		output ? (val ? "high" : "low") : "");
 
+	if (sleep) {
+		int slpm_pull = PIN_SLPM_PULL(cfg);
+		int slpm_output = PIN_SLPM_DIR(cfg);
+		int slpm_val = PIN_SLPM_VAL(cfg);
+
+		/*
+		 * The SLPM_* values are normal values + 1 to allow zero to
+		 * mean "same as normal".
+		 */
+		if (slpm_pull)
+			pull = slpm_pull - 1;
+		if (slpm_output)
+			output = slpm_output - 1;
+		if (slpm_val)
+			val = slpm_val - 1;
+
+		dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n",
+			pin,
+			slpm_pull ? pullnames[pull] : "same",
+			slpm_output ? (output ? "output" : "input") : "same",
+			slpm_val ? (val ? "high" : "low") : "same");
+	}
+
 	if (output)
 		__nmk_gpio_make_output(nmk_chip, offset, val);
 	else {
@@ -175,7 +198,7 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
  * side-effects.  The gpio can be manipulated later using standard GPIO API
  * calls.
  */
-int nmk_config_pin(pin_cfg_t cfg)
+int nmk_config_pin(pin_cfg_t cfg, bool sleep)
 {
 	struct nmk_gpio_chip *nmk_chip;
 	int gpio = PIN_NUM(cfg);
@@ -186,7 +209,7 @@ int nmk_config_pin(pin_cfg_t cfg)
 		return -EINVAL;
 
 	spin_lock_irqsave(&nmk_chip->lock, flags);
-	__nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg);
+	__nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg, sleep);
 	spin_unlock_irqrestore(&nmk_chip->lock, flags);
 
 	return 0;
@@ -207,7 +230,7 @@ int nmk_config_pins(pin_cfg_t *cfgs, int num)
 	int i;
 
 	for (i = 0; i < num; i++) {
-		int ret = nmk_config_pin(cfgs[i]);
+		ret = nmk_config_pin(cfgs[i], false);
 		if (ret)
 			break;
 	}
@@ -216,6 +239,21 @@ int nmk_config_pins(pin_cfg_t *cfgs, int num)
 }
 EXPORT_SYMBOL(nmk_config_pins);
 
+int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num)
+{
+	int ret = 0;
+	int i;
+
+	for (i = 0; i < num; i++) {
+		ret = nmk_config_pin(cfgs[i], true);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(nmk_config_pins_sleep);
+
 /**
  * nmk_gpio_set_slpm() - configure the sleep mode of a pin
  * @gpio: pin number
@@ -634,7 +672,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 
 	chip = &nmk_chip->chip;
 	chip->base = pdata->first_gpio;
-	chip->label = pdata->name;
+	chip->label = pdata->name ?: dev_name(&dev->dev);
 	chip->dev = &dev->dev;
 	chip->owner = THIS_MODULE;
 
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index 8c5ae3f2acf..05a3936ae6d 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -19,16 +19,22 @@
  *	bit  9..10 - Alternate Function Selection
  *	bit 11..12 - Pull up/down state
  *	bit     13 - Sleep mode behaviour
- *	bit     14 - (sleep mode) Direction
- *	bit     15 - (sleep mode) Value (if output)
+ *	bit     14 - Direction
+ *	bit     15 - Value (if output)
+ *	bit 16..18 - SLPM pull up/down state
+ *	bit 19..20 - SLPM direction
+ *	bit 21..22 - SLPM Value (if output)
  *
  * to facilitate the definition, the following macros are provided
  *
  * PIN_CFG_DEFAULT - default config (0):
  *		     pull up/down = disabled
  *		     sleep mode = input/wakeup
- *		     (sleep mode) direction = input
- *		     (sleep mode) value = low
+ *		     direction = input
+ *		     value = low
+ *		     SLPM direction = same as normal
+ *		     SLPM pull = same as normal
+ *		     SLPM value = same as normal
  *
  * PIN_CFG	   - default config with alternate function
  * PIN_CFG_PULL	   - default config with alternate function and pull up/down
@@ -75,30 +81,64 @@ typedef unsigned long pin_cfg_t;
 #define PIN_VAL_LOW		(0 << PIN_VAL_SHIFT)
 #define PIN_VAL_HIGH		(1 << PIN_VAL_SHIFT)
 
-/* Shortcuts.  Use these instead of separate DIR and VAL.  */
-#define PIN_INPUT		PIN_DIR_INPUT
+#define PIN_SLPM_PULL_SHIFT	16
+#define PIN_SLPM_PULL_MASK	(0x7 << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL(x)	\
+	(((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_NONE	\
+	((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_UP	\
+	((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_DOWN	\
+	((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
+
+#define PIN_SLPM_DIR_SHIFT	19
+#define PIN_SLPM_DIR_MASK	(0x3 << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR(x)		\
+	(((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_INPUT	((1 + 0) << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_OUTPUT	((1 + 1) << PIN_SLPM_DIR_SHIFT)
+
+#define PIN_SLPM_VAL_SHIFT	21
+#define PIN_SLPM_VAL_MASK	(0x3 << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL(x)		\
+	(((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_LOW	((1 + 0) << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_HIGH	((1 + 1) << PIN_SLPM_VAL_SHIFT)
+
+/* Shortcuts.  Use these instead of separate DIR, PULL, and VAL.  */
+#define PIN_INPUT_PULLDOWN	(PIN_DIR_INPUT | PIN_PULL_DOWN)
+#define PIN_INPUT_PULLUP	(PIN_DIR_INPUT | PIN_PULL_UP)
+#define PIN_INPUT_NOPULL	(PIN_DIR_INPUT | PIN_PULL_NONE)
 #define PIN_OUTPUT_LOW		(PIN_DIR_OUTPUT | PIN_VAL_LOW)
 #define PIN_OUTPUT_HIGH		(PIN_DIR_OUTPUT | PIN_VAL_HIGH)
 
-/*
- * These are the same as the ones above, but should make more sense to the
- * reader when seen along with a setting a pin to AF mode.
- */
-#define PIN_SLPM_INPUT		PIN_INPUT
-#define PIN_SLPM_OUTPUT_LOW	PIN_OUTPUT_LOW
-#define PIN_SLPM_OUTPUT_HIGH	PIN_OUTPUT_HIGH
+#define PIN_SLPM_INPUT_PULLDOWN	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
+#define PIN_SLPM_INPUT_PULLUP	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
+#define PIN_SLPM_INPUT_NOPULL	(PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
+#define PIN_SLPM_OUTPUT_LOW	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
+#define PIN_SLPM_OUTPUT_HIGH	(PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
 
-#define PIN_CFG_DEFAULT		(PIN_PULL_NONE | PIN_SLPM_INPUT)
+#define PIN_CFG_DEFAULT		(0)
 
 #define PIN_CFG(num, alt)		\
 	(PIN_CFG_DEFAULT |\
 	 (PIN_NUM(num) | PIN_##alt))
 
+#define PIN_CFG_INPUT(num, alt, pull)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
+
+#define PIN_CFG_OUTPUT(num, alt, val)		\
+	(PIN_CFG_DEFAULT |\
+	 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
+
 #define PIN_CFG_PULL(num, alt, pull)	\
 	((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
 	 (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
 
-extern int nmk_config_pin(pin_cfg_t cfg);
+extern int nmk_config_pin(pin_cfg_t cfg, bool sleep);
 extern int nmk_config_pins(pin_cfg_t *cfgs, int num);
+extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num);
 
 #endif
diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index aedf9c1d645..41723402006 100644
--- a/arch/arm/plat-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2008 STMicroelectronics
  * Copyright (C) 2010 Alessandro Rubini
+ * Copyright (C) 2010 Linus Walleij for ST-Ericsson
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2, as
@@ -16,11 +17,13 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/err.h>
+#include <linux/sched.h>
 #include <asm/mach/time.h>
+#include <asm/sched_clock.h>
 
 #include <plat/mtu.h>
 
-void __iomem *mtu_base; /* ssigned by machine code */
+void __iomem *mtu_base; /* Assigned by machine code */
 
 /*
  * Kernel assumes that sched_clock can be called early
@@ -48,16 +51,25 @@ static struct clocksource nmdk_clksrc = {
 /*
  * Override the global weak sched_clock symbol with this
  * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
+ * better resolution when scheduling the kernel.
  */
+static DEFINE_CLOCK_DATA(cd);
+
 unsigned long long notrace sched_clock(void)
 {
-	return clocksource_cyc2ns(nmdk_clksrc.read(
-				  &nmdk_clksrc),
-				  nmdk_clksrc.mult,
-				  nmdk_clksrc.shift);
+	u32 cyc;
+
+	if (unlikely(!mtu_base))
+		return 0;
+
+	cyc = -readl(mtu_base + MTU_VAL(0));
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
+}
+
+static void notrace nomadik_update_sched_clock(void)
+{
+	u32 cyc = -readl(mtu_base + MTU_VAL(0));
+	update_sched_clock(&cd, cyc, (u32)~0);
 }
 
 /* Clockevent device: use one-shot mode */
@@ -153,7 +165,6 @@ void __init nmdk_timer_init(void)
 	} else {
 		cr |= MTU_CRn_PRESCALE_1;
 	}
-	clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE);
 
 	/* Timer 0 is the free running clocksource */
 	writel(cr, mtu_base + MTU_CR(0));
@@ -161,13 +172,15 @@ void __init nmdk_timer_init(void)
 	writel(0, mtu_base + MTU_BGLR(0));
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 
-	/* Now the scheduling clock is ready */
+	/* Now the clock source is ready */
 	nmdk_clksrc.read = nmdk_read_timer;
 
-	if (clocksource_register(&nmdk_clksrc))
+	if (clocksource_register_hz(&nmdk_clksrc, rate))
 		pr_err("timer: failed to initialize clock source %s\n",
 		       nmdk_clksrc.name);
 
+	init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate);
+
 	/* Timer 1 is used for events */
 
 	clockevents_calc_mult_shift(&nmdk_clkevt, rate, MTU_MIN_RANGE);
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 92c5bb7909f..18fe3cb195d 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -11,13 +11,14 @@ choice
 
 config ARCH_OMAP1
 	bool "TI OMAP1"
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
 	help
 	  "Systems based on omap7xx, omap15xx or omap16xx"
 
 config ARCH_OMAP2PLUS
 	bool "TI OMAP2/3/4"
-	select COMMON_CLKDEV
+	select CLKDEV_LOOKUP
+	select OMAP_DM_TIMER
 	help
 	  "Systems based on OMAP2, OMAP3 or OMAP4"
 
@@ -35,6 +36,37 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS_CLASS
 
+config OMAP_SMARTREFLEX
+	bool "SmartReflex support"
+	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+	help
+	  Say Y if you want to enable SmartReflex.
+
+	  SmartReflex can perform continuous dynamic voltage
+	  scaling around the nominal operating point voltage
+	  according to silicon characteristics and operating
+	  conditions. Enabling SmartReflex reduces power
+	  consumption.
+
+	  Please note, that by default SmartReflex is only
+	  initialized. To enable the automatic voltage
+	  compensation for vdd mpu  and vdd core from user space,
+	  user must write 1 to
+		/debug/voltage/vdd_<X>/smartreflex/autocomp,
+	  where X is mpu or core for OMAP3.
+	  Optionallly autocompensation can be enabled in the kernel
+	  by default during system init via the enable_on_init flag
+	  which an be passed as platform data to the smartreflex driver.
+
+config OMAP_SMARTREFLEX_CLASS3
+	bool "Class 3 mode of Smartreflex Implementation"
+	depends on OMAP_SMARTREFLEX && TWL4030_CORE
+	help
+	  Say Y to enable Class 3 implementation of Smartreflex
+
+	  Class 3 implementation of Smartreflex employs continuous hardware
+	  voltage calibration.
+
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_OMAP
@@ -109,6 +141,9 @@ config OMAP_IOMMU_DEBUG
 
          Say N unless you know you need this.
 
+config OMAP_IOMMU_IVA2
+	bool
+
 choice
 	prompt "System timer"
 	default OMAP_32K_TIMER if !ARCH_OMAP15XX
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index 155fe43a672..ea4644021fb 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -15,7 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/err.h>
 #include <linux/io.h>
+#include <linux/sched.h>
+
+#include <asm/sched_clock.h>
 
 #include <plat/common.h>
 #include <plat/board.h>
@@ -44,7 +48,7 @@
 static u32 offset_32k __read_mostly;
 
 #ifdef CONFIG_ARCH_OMAP16XX
-static cycle_t omap16xx_32k_read(struct clocksource *cs)
+static cycle_t notrace omap16xx_32k_read(struct clocksource *cs)
 {
 	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
 }
@@ -53,7 +57,7 @@ static cycle_t omap16xx_32k_read(struct clocksource *cs)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2420
-static cycle_t omap2420_32k_read(struct clocksource *cs)
+static cycle_t notrace omap2420_32k_read(struct clocksource *cs)
 {
 	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
 }
@@ -62,7 +66,7 @@ static cycle_t omap2420_32k_read(struct clocksource *cs)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP2430
-static cycle_t omap2430_32k_read(struct clocksource *cs)
+static cycle_t notrace omap2430_32k_read(struct clocksource *cs)
 {
 	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
 }
@@ -71,7 +75,7 @@ static cycle_t omap2430_32k_read(struct clocksource *cs)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
-static cycle_t omap34xx_32k_read(struct clocksource *cs)
+static cycle_t notrace omap34xx_32k_read(struct clocksource *cs)
 {
 	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
 }
@@ -80,7 +84,7 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
-static cycle_t omap44xx_32k_read(struct clocksource *cs)
+static cycle_t notrace omap44xx_32k_read(struct clocksource *cs)
 {
 	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
 }
@@ -92,7 +96,7 @@ static cycle_t omap44xx_32k_read(struct clocksource *cs)
  * Kernel assumes that sched_clock can be called early but may not have
  * things ready yet.
  */
-static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+static cycle_t notrace omap_32k_read_dummy(struct clocksource *cs)
 {
 	return 0;
 }
@@ -102,7 +106,6 @@ static struct clocksource clocksource_32k = {
 	.rating		= 250,
 	.read		= omap_32k_read_dummy,
 	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 10,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -110,10 +113,25 @@ static struct clocksource clocksource_32k = {
  * Returns current time from boot in nsecs. It's OK for this to wrap
  * around for now, as it's just a relative time stamp.
  */
-unsigned long long sched_clock(void)
+static DEFINE_CLOCK_DATA(cd);
+
+/*
+ * Constants generated by clocks_calc_mult_shift(m, s, 32768, NSEC_PER_SEC, 60).
+ * This gives a resolution of about 30us and a wrap period of about 36hrs.
+ */
+#define SC_MULT		4000000000u
+#define SC_SHIFT	17
+
+unsigned long long notrace sched_clock(void)
 {
-	return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
-				  clocksource_32k.mult, clocksource_32k.shift);
+	u32 cyc = clocksource_32k.read(&clocksource_32k);
+	return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT);
+}
+
+static void notrace omap_update_sched_clock(void)
+{
+	u32 cyc = clocksource_32k.read(&clocksource_32k);
+	update_sched_clock(&cd, cyc, (u32)~0);
 }
 
 /**
@@ -164,16 +182,16 @@ static int __init omap_init_clocksource_32k(void)
 			return -ENODEV;
 
 		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
-		if (sync_32k_ick)
+		if (!IS_ERR(sync_32k_ick))
 			clk_enable(sync_32k_ick);
 
-		clocksource_32k.mult = clocksource_hz2mult(32768,
-					    clocksource_32k.shift);
-
 		offset_32k = clocksource_32k.read(&clocksource_32k);
 
-		if (clocksource_register(&clocksource_32k))
+		if (clocksource_register_hz(&clocksource_32k, 32768))
 			printk(err, clocksource_32k.name);
+
+		init_fixed_sched_clock(&cd, omap_update_sched_clock, 32,
+				       32768, SC_MULT, SC_SHIFT);
 	}
 	return 0;
 }
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 6f42a18b8aa..10245b837c1 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -232,46 +232,6 @@ static void omap_init_uwire(void)
 static inline void omap_init_uwire(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-#if	defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
-
-static struct resource wdt_resources[] = {
-	{
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_wdt_device = {
-	.name	   = "omap_wdt",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-	.resource	= wdt_resources,
-};
-
-static void omap_init_wdt(void)
-{
-	if (cpu_is_omap16xx())
-		wdt_resources[0].start = 0xfffeb000;
-	else if (cpu_is_omap2420())
-		wdt_resources[0].start = 0x48022000; /* WDT2 */
-	else if (cpu_is_omap2430())
-		wdt_resources[0].start = 0x49016000; /* WDT2 */
-	else if (cpu_is_omap343x())
-		wdt_resources[0].start = 0x48314000; /* WDT2 */
-	else if (cpu_is_omap44xx())
-		wdt_resources[0].start = 0x4a314000;
-	else
-		return;
-
-	wdt_resources[0].end = wdt_resources[0].start + 0x4f;
-
-	(void) platform_device_register(&omap_wdt_device);
-}
-#else
-static inline void omap_init_wdt(void) {}
-#endif
-
 #if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
 
 static phys_addr_t omap_dsp_phys_mempool_base;
@@ -284,12 +244,14 @@ void __init omap_dsp_reserve_sdram_memblock(void)
 	if (!size)
 		return;
 
-	paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+	paddr = memblock_alloc(size, SZ_1M);
 	if (!paddr) {
 		pr_err("%s: failed to reserve %x bytes\n",
 				__func__, size);
 		return;
 	}
+	memblock_free(paddr, size);
+	memblock_remove(paddr, size);
 
 	omap_dsp_phys_mempool_base = paddr;
 }
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index f5c5b8da9a8..c4b2b478b1a 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -15,6 +15,10 @@
  *
  * Support functions for the OMAP internal DMA channels.
  *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Converted DMA library into DMA platform driver.
+ *	- G, Manjunath Kondaiah <manjugk@ti.com>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -53,7 +57,11 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 
 #define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
 
+static struct omap_system_dma_plat_info *p;
+static struct omap_dma_dev_attr *d;
+
 static int enable_1510_mode;
+static u32 errata;
 
 static struct omap_dma_global_context_registers {
 	u32 dma_irqenable_l0;
@@ -61,27 +69,6 @@ static struct omap_dma_global_context_registers {
 	u32 dma_gcr;
 } omap_dma_global_context;
 
-struct omap_dma_lch {
-	int next_lch;
-	int dev_id;
-	u16 saved_csr;
-	u16 enabled_irqs;
-	const char *dev_name;
-	void (*callback)(int lch, u16 ch_status, void *data);
-	void *data;
-
-#ifndef CONFIG_ARCH_OMAP1
-	/* required for Dynamic chaining */
-	int prev_linked_ch;
-	int next_linked_ch;
-	int state;
-	int chain_id;
-
-	int status;
-#endif
-	long flags;
-};
-
 struct dma_link_info {
 	int *linked_dmach_q;
 	int no_of_lchs_linked;
@@ -137,15 +124,6 @@ static int omap_dma_reserve_channels;
 
 static spinlock_t dma_chan_lock;
 static struct omap_dma_lch *dma_chan;
-static void __iomem *omap_dma_base;
-
-static const u8 omap1_dma_irq[OMAP1_LOGICAL_DMA_CH_COUNT] = {
-	INT_DMA_CH0_6, INT_DMA_CH1_7, INT_DMA_CH2_8, INT_DMA_CH3,
-	INT_DMA_CH4, INT_DMA_CH5, INT_1610_DMA_CH6, INT_1610_DMA_CH7,
-	INT_1610_DMA_CH8, INT_1610_DMA_CH9, INT_1610_DMA_CH10,
-	INT_1610_DMA_CH11, INT_1610_DMA_CH12, INT_1610_DMA_CH13,
-	INT_1610_DMA_CH14, INT_1610_DMA_CH15, INT_DMA_LCD
-};
 
 static inline void disable_lnk(int lch);
 static void omap_disable_channel_irq(int lch);
@@ -154,24 +132,6 @@ static inline void omap_enable_channel_irq(int lch);
 #define REVISIT_24XX()		printk(KERN_ERR "FIXME: no %s on 24xx\n", \
 						__func__);
 
-#define dma_read(reg)							\
-({									\
-	u32 __val;							\
-	if (cpu_class_is_omap1())					\
-		__val = __raw_readw(omap_dma_base + OMAP1_DMA_##reg);	\
-	else								\
-		__val = __raw_readl(omap_dma_base + OMAP_DMA4_##reg);	\
-	__val;								\
-})
-
-#define dma_write(val, reg)						\
-({									\
-	if (cpu_class_is_omap1())					\
-		__raw_writew((u16)(val), omap_dma_base + OMAP1_DMA_##reg); \
-	else								\
-		__raw_writel((val), omap_dma_base + OMAP_DMA4_##reg);	\
-})
-
 #ifdef CONFIG_ARCH_OMAP15XX
 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
 int omap_dma_in_1510_mode(void)
@@ -206,16 +166,6 @@ static inline void set_gdma_dev(int req, int dev)
 #define set_gdma_dev(req, dev)	do {} while (0)
 #endif
 
-/* Omap1 only */
-static void clear_lch_regs(int lch)
-{
-	int i;
-	void __iomem *lch_base = omap_dma_base + OMAP1_DMA_CH_BASE(lch);
-
-	for (i = 0; i < 0x2c; i += 2)
-		__raw_writew(0, lch_base + i);
-}
-
 void omap_set_dma_priority(int lch, int dst_port, int priority)
 {
 	unsigned long reg;
@@ -248,12 +198,12 @@ void omap_set_dma_priority(int lch, int dst_port, int priority)
 	if (cpu_class_is_omap2()) {
 		u32 ccr;
 
-		ccr = dma_read(CCR(lch));
+		ccr = p->dma_read(CCR, lch);
 		if (priority)
 			ccr |= (1 << 6);
 		else
 			ccr &= ~(1 << 6);
-		dma_write(ccr, CCR(lch));
+		p->dma_write(ccr, CCR, lch);
 	}
 }
 EXPORT_SYMBOL(omap_set_dma_priority);
@@ -264,31 +214,31 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 {
 	u32 l;
 
-	l = dma_read(CSDP(lch));
+	l = p->dma_read(CSDP, lch);
 	l &= ~0x03;
 	l |= data_type;
-	dma_write(l, CSDP(lch));
+	p->dma_write(l, CSDP, lch);
 
 	if (cpu_class_is_omap1()) {
 		u16 ccr;
 
-		ccr = dma_read(CCR(lch));
+		ccr = p->dma_read(CCR, lch);
 		ccr &= ~(1 << 5);
 		if (sync_mode == OMAP_DMA_SYNC_FRAME)
 			ccr |= 1 << 5;
-		dma_write(ccr, CCR(lch));
+		p->dma_write(ccr, CCR, lch);
 
-		ccr = dma_read(CCR2(lch));
+		ccr = p->dma_read(CCR2, lch);
 		ccr &= ~(1 << 2);
 		if (sync_mode == OMAP_DMA_SYNC_BLOCK)
 			ccr |= 1 << 2;
-		dma_write(ccr, CCR2(lch));
+		p->dma_write(ccr, CCR2, lch);
 	}
 
 	if (cpu_class_is_omap2() && dma_trigger) {
 		u32 val;
 
-		val = dma_read(CCR(lch));
+		val = p->dma_read(CCR, lch);
 
 		/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
 		val &= ~((1 << 23) | (3 << 19) | 0x1f);
@@ -313,11 +263,11 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 		} else {
 			val &= ~(1 << 24);	/* dest synch */
 		}
-		dma_write(val, CCR(lch));
+		p->dma_write(val, CCR, lch);
 	}
 
-	dma_write(elem_count, CEN(lch));
-	dma_write(frame_count, CFN(lch));
+	p->dma_write(elem_count, CEN, lch);
+	p->dma_write(frame_count, CFN, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
@@ -328,7 +278,7 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 	if (cpu_class_is_omap1()) {
 		u16 w;
 
-		w = dma_read(CCR2(lch));
+		w = p->dma_read(CCR2, lch);
 		w &= ~0x03;
 
 		switch (mode) {
@@ -343,23 +293,22 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 		default:
 			BUG();
 		}
-		dma_write(w, CCR2(lch));
+		p->dma_write(w, CCR2, lch);
 
-		w = dma_read(LCH_CTRL(lch));
+		w = p->dma_read(LCH_CTRL, lch);
 		w &= ~0x0f;
 		/* Default is channel type 2D */
 		if (mode) {
-			dma_write((u16)color, COLOR_L(lch));
-			dma_write((u16)(color >> 16), COLOR_U(lch));
+			p->dma_write(color, COLOR, lch);
 			w |= 1;		/* Channel type G */
 		}
-		dma_write(w, LCH_CTRL(lch));
+		p->dma_write(w, LCH_CTRL, lch);
 	}
 
 	if (cpu_class_is_omap2()) {
 		u32 val;
 
-		val = dma_read(CCR(lch));
+		val = p->dma_read(CCR, lch);
 		val &= ~((1 << 17) | (1 << 16));
 
 		switch (mode) {
@@ -374,10 +323,10 @@ void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 		default:
 			BUG();
 		}
-		dma_write(val, CCR(lch));
+		p->dma_write(val, CCR, lch);
 
 		color &= 0xffffff;
-		dma_write(color, COLOR(lch));
+		p->dma_write(color, COLOR, lch);
 	}
 }
 EXPORT_SYMBOL(omap_set_dma_color_mode);
@@ -387,10 +336,10 @@ void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
 	if (cpu_class_is_omap2()) {
 		u32 csdp;
 
-		csdp = dma_read(CSDP(lch));
+		csdp = p->dma_read(CSDP, lch);
 		csdp &= ~(0x3 << 16);
 		csdp |= (mode << 16);
-		dma_write(csdp, CSDP(lch));
+		p->dma_write(csdp, CSDP, lch);
 	}
 }
 EXPORT_SYMBOL(omap_set_dma_write_mode);
@@ -400,10 +349,10 @@ void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
 	if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
 		u32 l;
 
-		l = dma_read(LCH_CTRL(lch));
+		l = p->dma_read(LCH_CTRL, lch);
 		l &= ~0x7;
 		l |= mode;
-		dma_write(l, LCH_CTRL(lch));
+		p->dma_write(l, LCH_CTRL, lch);
 	}
 }
 EXPORT_SYMBOL(omap_set_dma_channel_mode);
@@ -418,27 +367,21 @@ void omap_set_dma_src_params(int lch, int src_port, int src_amode,
 	if (cpu_class_is_omap1()) {
 		u16 w;
 
-		w = dma_read(CSDP(lch));
+		w = p->dma_read(CSDP, lch);
 		w &= ~(0x1f << 2);
 		w |= src_port << 2;
-		dma_write(w, CSDP(lch));
+		p->dma_write(w, CSDP, lch);
 	}
 
-	l = dma_read(CCR(lch));
+	l = p->dma_read(CCR, lch);
 	l &= ~(0x03 << 12);
 	l |= src_amode << 12;
-	dma_write(l, CCR(lch));
-
-	if (cpu_class_is_omap1()) {
-		dma_write(src_start >> 16, CSSA_U(lch));
-		dma_write((u16)src_start, CSSA_L(lch));
-	}
+	p->dma_write(l, CCR, lch);
 
-	if (cpu_class_is_omap2())
-		dma_write(src_start, CSSA(lch));
+	p->dma_write(src_start, CSSA, lch);
 
-	dma_write(src_ei, CSEI(lch));
-	dma_write(src_fi, CSFI(lch));
+	p->dma_write(src_ei, CSEI, lch);
+	p->dma_write(src_fi, CSFI, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_src_params);
 
@@ -466,8 +409,8 @@ void omap_set_dma_src_index(int lch, int eidx, int fidx)
 	if (cpu_class_is_omap2())
 		return;
 
-	dma_write(eidx, CSEI(lch));
-	dma_write(fidx, CSFI(lch));
+	p->dma_write(eidx, CSEI, lch);
+	p->dma_write(fidx, CSFI, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_src_index);
 
@@ -475,11 +418,11 @@ void omap_set_dma_src_data_pack(int lch, int enable)
 {
 	u32 l;
 
-	l = dma_read(CSDP(lch));
+	l = p->dma_read(CSDP, lch);
 	l &= ~(1 << 6);
 	if (enable)
 		l |= (1 << 6);
-	dma_write(l, CSDP(lch));
+	p->dma_write(l, CSDP, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_src_data_pack);
 
@@ -488,7 +431,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 	unsigned int burst = 0;
 	u32 l;
 
-	l = dma_read(CSDP(lch));
+	l = p->dma_read(CSDP, lch);
 	l &= ~(0x03 << 7);
 
 	switch (burst_mode) {
@@ -524,7 +467,7 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 	}
 
 	l |= (burst << 7);
-	dma_write(l, CSDP(lch));
+	p->dma_write(l, CSDP, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
 
@@ -536,27 +479,21 @@ void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
 	u32 l;
 
 	if (cpu_class_is_omap1()) {
-		l = dma_read(CSDP(lch));
+		l = p->dma_read(CSDP, lch);
 		l &= ~(0x1f << 9);
 		l |= dest_port << 9;
-		dma_write(l, CSDP(lch));
+		p->dma_write(l, CSDP, lch);
 	}
 
-	l = dma_read(CCR(lch));
+	l = p->dma_read(CCR, lch);
 	l &= ~(0x03 << 14);
 	l |= dest_amode << 14;
-	dma_write(l, CCR(lch));
-
-	if (cpu_class_is_omap1()) {
-		dma_write(dest_start >> 16, CDSA_U(lch));
-		dma_write(dest_start, CDSA_L(lch));
-	}
+	p->dma_write(l, CCR, lch);
 
-	if (cpu_class_is_omap2())
-		dma_write(dest_start, CDSA(lch));
+	p->dma_write(dest_start, CDSA, lch);
 
-	dma_write(dst_ei, CDEI(lch));
-	dma_write(dst_fi, CDFI(lch));
+	p->dma_write(dst_ei, CDEI, lch);
+	p->dma_write(dst_fi, CDFI, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_dest_params);
 
@@ -565,8 +502,8 @@ void omap_set_dma_dest_index(int lch, int eidx, int fidx)
 	if (cpu_class_is_omap2())
 		return;
 
-	dma_write(eidx, CDEI(lch));
-	dma_write(fidx, CDFI(lch));
+	p->dma_write(eidx, CDEI, lch);
+	p->dma_write(fidx, CDFI, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_dest_index);
 
@@ -574,11 +511,11 @@ void omap_set_dma_dest_data_pack(int lch, int enable)
 {
 	u32 l;
 
-	l = dma_read(CSDP(lch));
+	l = p->dma_read(CSDP, lch);
 	l &= ~(1 << 13);
 	if (enable)
 		l |= 1 << 13;
-	dma_write(l, CSDP(lch));
+	p->dma_write(l, CSDP, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
 
@@ -587,7 +524,7 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 	unsigned int burst = 0;
 	u32 l;
 
-	l = dma_read(CSDP(lch));
+	l = p->dma_read(CSDP, lch);
 	l &= ~(0x03 << 14);
 
 	switch (burst_mode) {
@@ -620,7 +557,7 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 		return;
 	}
 	l |= (burst << 14);
-	dma_write(l, CSDP(lch));
+	p->dma_write(l, CSDP, lch);
 }
 EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
 
@@ -630,18 +567,18 @@ static inline void omap_enable_channel_irq(int lch)
 
 	/* Clear CSR */
 	if (cpu_class_is_omap1())
-		status = dma_read(CSR(lch));
+		status = p->dma_read(CSR, lch);
 	else if (cpu_class_is_omap2())
-		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
+		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
 
 	/* Enable some nice interrupts. */
-	dma_write(dma_chan[lch].enabled_irqs, CICR(lch));
+	p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
 }
 
 static void omap_disable_channel_irq(int lch)
 {
 	if (cpu_class_is_omap2())
-		dma_write(0, CICR(lch));
+		p->dma_write(0, CICR, lch);
 }
 
 void omap_enable_dma_irq(int lch, u16 bits)
@@ -660,7 +597,7 @@ static inline void enable_lnk(int lch)
 {
 	u32 l;
 
-	l = dma_read(CLNK_CTRL(lch));
+	l = p->dma_read(CLNK_CTRL, lch);
 
 	if (cpu_class_is_omap1())
 		l &= ~(1 << 14);
@@ -675,18 +612,18 @@ static inline void enable_lnk(int lch)
 			l = dma_chan[lch].next_linked_ch | (1 << 15);
 #endif
 
-	dma_write(l, CLNK_CTRL(lch));
+	p->dma_write(l, CLNK_CTRL, lch);
 }
 
 static inline void disable_lnk(int lch)
 {
 	u32 l;
 
-	l = dma_read(CLNK_CTRL(lch));
+	l = p->dma_read(CLNK_CTRL, lch);
 
 	/* Disable interrupts */
 	if (cpu_class_is_omap1()) {
-		dma_write(0, CICR(lch));
+		p->dma_write(0, CICR, lch);
 		/* Set the STOP_LNK bit */
 		l |= 1 << 14;
 	}
@@ -697,7 +634,7 @@ static inline void disable_lnk(int lch)
 		l &= ~(1 << 15);
 	}
 
-	dma_write(l, CLNK_CTRL(lch));
+	p->dma_write(l, CLNK_CTRL, lch);
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 
@@ -710,9 +647,9 @@ static inline void omap2_enable_irq_lch(int lch)
 		return;
 
 	spin_lock_irqsave(&dma_chan_lock, flags);
-	val = dma_read(IRQENABLE_L0);
+	val = p->dma_read(IRQENABLE_L0, lch);
 	val |= 1 << lch;
-	dma_write(val, IRQENABLE_L0);
+	p->dma_write(val, IRQENABLE_L0, lch);
 	spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
@@ -725,9 +662,9 @@ static inline void omap2_disable_irq_lch(int lch)
 		return;
 
 	spin_lock_irqsave(&dma_chan_lock, flags);
-	val = dma_read(IRQENABLE_L0);
+	val = p->dma_read(IRQENABLE_L0, lch);
 	val &= ~(1 << lch);
-	dma_write(val, IRQENABLE_L0);
+	p->dma_write(val, IRQENABLE_L0, lch);
 	spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
@@ -754,8 +691,8 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan = dma_chan + free_ch;
 	chan->dev_id = dev_id;
 
-	if (cpu_class_is_omap1())
-		clear_lch_regs(free_ch);
+	if (p->clear_lch_regs)
+		p->clear_lch_regs(free_ch);
 
 	if (cpu_class_is_omap2())
 		omap_clear_dma(free_ch);
@@ -792,17 +729,17 @@ int omap_request_dma(int dev_id, const char *dev_name,
 		 * Disable the 1510 compatibility mode and set the sync device
 		 * id.
 		 */
-		dma_write(dev_id | (1 << 10), CCR(free_ch));
+		p->dma_write(dev_id | (1 << 10), CCR, free_ch);
 	} else if (cpu_is_omap7xx() || cpu_is_omap15xx()) {
-		dma_write(dev_id, CCR(free_ch));
+		p->dma_write(dev_id, CCR, free_ch);
 	}
 
 	if (cpu_class_is_omap2()) {
 		omap2_enable_irq_lch(free_ch);
 		omap_enable_channel_irq(free_ch);
 		/* Clear the CSR register and IRQ status register */
-		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(free_ch));
-		dma_write(1 << free_ch, IRQSTATUS_L0);
+		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, free_ch);
+		p->dma_write(1 << free_ch, IRQSTATUS_L0, 0);
 	}
 
 	*dma_ch_out = free_ch;
@@ -823,23 +760,23 @@ void omap_free_dma(int lch)
 
 	if (cpu_class_is_omap1()) {
 		/* Disable all DMA interrupts for the channel. */
-		dma_write(0, CICR(lch));
+		p->dma_write(0, CICR, lch);
 		/* Make sure the DMA transfer is stopped. */
-		dma_write(0, CCR(lch));
+		p->dma_write(0, CCR, lch);
 	}
 
 	if (cpu_class_is_omap2()) {
 		omap2_disable_irq_lch(lch);
 
 		/* Clear the CSR register and IRQ status register */
-		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
-		dma_write(1 << lch, IRQSTATUS_L0);
+		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+		p->dma_write(1 << lch, IRQSTATUS_L0, lch);
 
 		/* Disable all DMA interrupts for the channel. */
-		dma_write(0, CICR(lch));
+		p->dma_write(0, CICR, lch);
 
 		/* Make sure the DMA transfer is stopped. */
-		dma_write(0, CCR(lch));
+		p->dma_write(0, CCR, lch);
 		omap_clear_dma(lch);
 	}
 
@@ -880,7 +817,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
 	reg |= (0x3 & tparams) << 12;
 	reg |= (arb_rate & 0xff) << 16;
 
-	dma_write(reg, GCR);
+	p->dma_write(reg, GCR, 0);
 }
 EXPORT_SYMBOL(omap_dma_set_global_params);
 
@@ -903,14 +840,14 @@ omap_dma_set_prio_lch(int lch, unsigned char read_prio,
 		printk(KERN_ERR "Invalid channel id\n");
 		return -EINVAL;
 	}
-	l = dma_read(CCR(lch));
+	l = p->dma_read(CCR, lch);
 	l &= ~((1 << 6) | (1 << 26));
 	if (cpu_is_omap2430() || cpu_is_omap34xx() ||  cpu_is_omap44xx())
 		l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
 	else
 		l |= ((read_prio & 0x1) << 6);
 
-	dma_write(l, CCR(lch));
+	p->dma_write(l, CCR, lch);
 
 	return 0;
 }
@@ -925,25 +862,7 @@ void omap_clear_dma(int lch)
 	unsigned long flags;
 
 	local_irq_save(flags);
-
-	if (cpu_class_is_omap1()) {
-		u32 l;
-
-		l = dma_read(CCR(lch));
-		l &= ~OMAP_DMA_CCR_EN;
-		dma_write(l, CCR(lch));
-
-		/* Clear pending interrupts */
-		l = dma_read(CSR(lch));
-	}
-
-	if (cpu_class_is_omap2()) {
-		int i;
-		void __iomem *lch_base = omap_dma_base + OMAP_DMA4_CH_BASE(lch);
-		for (i = 0; i < 0x44; i += 4)
-			__raw_writel(0, lch_base + i);
-	}
-
+	p->clear_dma(lch);
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL(omap_clear_dma);
@@ -957,13 +876,13 @@ void omap_start_dma(int lch)
 	 * before starting dma transfer.
 	 */
 	if (cpu_is_omap15xx())
-		dma_write(0, CPC(lch));
+		p->dma_write(0, CPC, lch);
 	else
-		dma_write(0, CDAC(lch));
+		p->dma_write(0, CDAC, lch);
 
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch;
-		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
+		char dma_chan_link_map[dma_lch_count];
 
 		dma_chan_link_map[lch] = 1;
 		/* Set the link register of the first channel */
@@ -985,32 +904,18 @@ void omap_start_dma(int lch)
 
 			cur_lch = next_lch;
 		} while (next_lch != -1);
-	} else if (cpu_is_omap242x() ||
-		(cpu_is_omap243x() &&  omap_type() <= OMAP2430_REV_ES1_0)) {
-
-		/* Errata: Need to write lch even if not using chaining */
-		dma_write(lch, CLNK_CTRL(lch));
-	}
+	} else if (IS_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS))
+		p->dma_write(lch, CLNK_CTRL, lch);
 
 	omap_enable_channel_irq(lch);
 
-	l = dma_read(CCR(lch));
-
-	/*
-	 * Errata: Inter Frame DMA buffering issue (All OMAP2420 and
-	 * OMAP2430ES1.0): DMA will wrongly buffer elements if packing and
-	 * bursting is enabled. This might result in data gets stalled in
-	 * FIFO at the end of the block.
-	 * Workaround: DMA channels must have BUFFERING_DISABLED bit set to
-	 * guarantee no data will stay in the DMA FIFO in case inter frame
-	 * buffering occurs.
-	 */
-	if (cpu_is_omap2420() ||
-	    (cpu_is_omap2430() && (omap_type() == OMAP2430_REV_ES1_0)))
-		l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
+	l = p->dma_read(CCR, lch);
 
+	if (IS_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING))
+			l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
 	l |= OMAP_DMA_CCR_EN;
-	dma_write(l, CCR(lch));
+
+	p->dma_write(l, CCR, lch);
 
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 }
@@ -1022,46 +927,46 @@ void omap_stop_dma(int lch)
 
 	/* Disable all interrupts on the channel */
 	if (cpu_class_is_omap1())
-		dma_write(0, CICR(lch));
+		p->dma_write(0, CICR, lch);
 
-	l = dma_read(CCR(lch));
-	/* OMAP3 Errata i541: sDMA FIFO draining does not finish */
-	if (cpu_is_omap34xx() && (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
+	l = p->dma_read(CCR, lch);
+	if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&
+			(l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
 		int i = 0;
 		u32 sys_cf;
 
 		/* Configure No-Standby */
-		l = dma_read(OCP_SYSCONFIG);
+		l = p->dma_read(OCP_SYSCONFIG, lch);
 		sys_cf = l;
 		l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK;
 		l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE);
-		dma_write(l , OCP_SYSCONFIG);
+		p->dma_write(l , OCP_SYSCONFIG, 0);
 
-		l = dma_read(CCR(lch));
+		l = p->dma_read(CCR, lch);
 		l &= ~OMAP_DMA_CCR_EN;
-		dma_write(l, CCR(lch));
+		p->dma_write(l, CCR, lch);
 
 		/* Wait for sDMA FIFO drain */
-		l = dma_read(CCR(lch));
+		l = p->dma_read(CCR, lch);
 		while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE |
 					OMAP_DMA_CCR_WR_ACTIVE))) {
 			udelay(5);
 			i++;
-			l = dma_read(CCR(lch));
+			l = p->dma_read(CCR, lch);
 		}
 		if (i >= 100)
 			printk(KERN_ERR "DMA drain did not complete on "
 					"lch %d\n", lch);
 		/* Restore OCP_SYSCONFIG */
-		dma_write(sys_cf, OCP_SYSCONFIG);
+		p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
 	} else {
 		l &= ~OMAP_DMA_CCR_EN;
-		dma_write(l, CCR(lch));
+		p->dma_write(l, CCR, lch);
 	}
 
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
-		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
+		char dma_chan_link_map[dma_lch_count];
 
 		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
 		do {
@@ -1122,19 +1027,15 @@ dma_addr_t omap_get_dma_src_pos(int lch)
 	dma_addr_t offset = 0;
 
 	if (cpu_is_omap15xx())
-		offset = dma_read(CPC(lch));
+		offset = p->dma_read(CPC, lch);
 	else
-		offset = dma_read(CSAC(lch));
+		offset = p->dma_read(CSAC, lch);
 
-	/*
-	 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
-	 * read before the DMA controller finished disabling the channel.
-	 */
-	if (!cpu_is_omap15xx() && offset == 0)
-		offset = dma_read(CSAC(lch));
+	if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
+		offset = p->dma_read(CSAC, lch);
 
 	if (cpu_class_is_omap1())
-		offset |= (dma_read(CSSA_U(lch)) << 16);
+		offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
 
 	return offset;
 }
@@ -1153,19 +1054,19 @@ dma_addr_t omap_get_dma_dst_pos(int lch)
 	dma_addr_t offset = 0;
 
 	if (cpu_is_omap15xx())
-		offset = dma_read(CPC(lch));
+		offset = p->dma_read(CPC, lch);
 	else
-		offset = dma_read(CDAC(lch));
+		offset = p->dma_read(CDAC, lch);
 
 	/*
 	 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
 	 * read before the DMA controller finished disabling the channel.
 	 */
 	if (!cpu_is_omap15xx() && offset == 0)
-		offset = dma_read(CDAC(lch));
+		offset = p->dma_read(CDAC, lch);
 
 	if (cpu_class_is_omap1())
-		offset |= (dma_read(CDSA_U(lch)) << 16);
+		offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
 
 	return offset;
 }
@@ -1173,7 +1074,7 @@ EXPORT_SYMBOL(omap_get_dma_dst_pos);
 
 int omap_get_dma_active_status(int lch)
 {
-	return (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN) != 0;
+	return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0;
 }
 EXPORT_SYMBOL(omap_get_dma_active_status);
 
@@ -1186,7 +1087,7 @@ int omap_dma_running(void)
 			return 1;
 
 	for (lch = 0; lch < dma_chan_count; lch++)
-		if (dma_read(CCR(lch)) & OMAP_DMA_CCR_EN)
+		if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
 			return 1;
 
 	return 0;
@@ -1201,8 +1102,8 @@ void omap_dma_link_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
 		if (lch_head == lch_queue) {
-			dma_write(dma_read(CCR(lch_head)) | (3 << 8),
-								CCR(lch_head));
+			p->dma_write(p->dma_read(CCR, lch_head) | (3 << 8),
+								CCR, lch_head);
 			return;
 		}
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
@@ -1228,8 +1129,8 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
 {
 	if (omap_dma_in_1510_mode()) {
 		if (lch_head == lch_queue) {
-			dma_write(dma_read(CCR(lch_head)) & ~(3 << 8),
-								CCR(lch_head));
+			p->dma_write(p->dma_read(CCR, lch_head) & ~(3 << 8),
+								CCR, lch_head);
 			return;
 		}
 		printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
@@ -1255,8 +1156,6 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
 }
 EXPORT_SYMBOL(omap_dma_unlink_lch);
 
-/*----------------------------------------------------------------------------*/
-
 #ifndef CONFIG_ARCH_OMAP1
 /* Create chain of DMA channesls */
 static void create_dma_lch_chain(int lch_head, int lch_queue)
@@ -1281,15 +1180,15 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
 					lch_queue;
 	}
 
-	l = dma_read(CLNK_CTRL(lch_head));
+	l = p->dma_read(CLNK_CTRL, lch_head);
 	l &= ~(0x1f);
 	l |= lch_queue;
-	dma_write(l, CLNK_CTRL(lch_head));
+	p->dma_write(l, CLNK_CTRL, lch_head);
 
-	l = dma_read(CLNK_CTRL(lch_queue));
+	l = p->dma_read(CLNK_CTRL, lch_queue);
 	l &= ~(0x1f);
 	l |= (dma_chan[lch_queue].next_linked_ch);
-	dma_write(l, CLNK_CTRL(lch_queue));
+	p->dma_write(l, CLNK_CTRL, lch_queue);
 }
 
 /**
@@ -1565,13 +1464,13 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 
 	/* Set the params to the free channel */
 	if (src_start != 0)
-		dma_write(src_start, CSSA(lch));
+		p->dma_write(src_start, CSSA, lch);
 	if (dest_start != 0)
-		dma_write(dest_start, CDSA(lch));
+		p->dma_write(dest_start, CDSA, lch);
 
 	/* Write the buffer size */
-	dma_write(elem_count, CEN(lch));
-	dma_write(frame_count, CFN(lch));
+	p->dma_write(elem_count, CEN, lch);
+	p->dma_write(frame_count, CFN, lch);
 
 	/*
 	 * If the chain is dynamically linked,
@@ -1604,8 +1503,8 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 				enable_lnk(dma_chan[lch].prev_linked_ch);
 				dma_chan[lch].state = DMA_CH_QUEUED;
 				start_dma = 0;
-				if (0 == ((1 << 7) & dma_read(
-					CCR(dma_chan[lch].prev_linked_ch)))) {
+				if (0 == ((1 << 7) & p->dma_read(
+					CCR, dma_chan[lch].prev_linked_ch))) {
 					disable_lnk(dma_chan[lch].
 						    prev_linked_ch);
 					pr_debug("\n prev ch is stopped\n");
@@ -1621,7 +1520,7 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 			}
 			omap_enable_channel_irq(lch);
 
-			l = dma_read(CCR(lch));
+			l = p->dma_read(CCR, lch);
 
 			if ((0 == (l & (1 << 24))))
 				l &= ~(1 << 25);
@@ -1632,12 +1531,12 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 					l |= (1 << 7);
 					dma_chan[lch].state = DMA_CH_STARTED;
 					pr_debug("starting %d\n", lch);
-					dma_write(l, CCR(lch));
+					p->dma_write(l, CCR, lch);
 				} else
 					start_dma = 0;
 			} else {
 				if (0 == (l & (1 << 7)))
-					dma_write(l, CCR(lch));
+					p->dma_write(l, CCR, lch);
 			}
 			dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 		}
@@ -1682,7 +1581,7 @@ int omap_start_dma_chain_transfers(int chain_id)
 		omap_enable_channel_irq(channels[0]);
 	}
 
-	l = dma_read(CCR(channels[0]));
+	l = p->dma_read(CCR, channels[0]);
 	l |= (1 << 7);
 	dma_linked_lch[chain_id].chain_state = DMA_CHAIN_STARTED;
 	dma_chan[channels[0]].state = DMA_CH_STARTED;
@@ -1691,7 +1590,7 @@ int omap_start_dma_chain_transfers(int chain_id)
 		l &= ~(1 << 25);
 	else
 		l |= (1 << 25);
-	dma_write(l, CCR(channels[0]));
+	p->dma_write(l, CCR, channels[0]);
 
 	dma_chan[channels[0]].flags |= OMAP_DMA_ACTIVE;
 
@@ -1711,7 +1610,7 @@ int omap_stop_dma_chain_transfers(int chain_id)
 {
 	int *channels;
 	u32 l, i;
-	u32 sys_cf;
+	u32 sys_cf = 0;
 
 	/* Check for input params */
 	if (unlikely((chain_id < 0 || chain_id >= dma_lch_count))) {
@@ -1726,22 +1625,20 @@ int omap_stop_dma_chain_transfers(int chain_id)
 	}
 	channels = dma_linked_lch[chain_id].linked_dmach_q;
 
-	/*
-	 * DMA Errata:
-	 * Special programming model needed to disable DMA before end of block
-	 */
-	sys_cf = dma_read(OCP_SYSCONFIG);
-	l = sys_cf;
-	/* Middle mode reg set no Standby */
-	l &= ~((1 << 12)|(1 << 13));
-	dma_write(l, OCP_SYSCONFIG);
+	if (IS_DMA_ERRATA(DMA_ERRATA_i88)) {
+		sys_cf = p->dma_read(OCP_SYSCONFIG, 0);
+		l = sys_cf;
+		/* Middle mode reg set no Standby */
+		l &= ~((1 << 12)|(1 << 13));
+		p->dma_write(l, OCP_SYSCONFIG, 0);
+	}
 
 	for (i = 0; i < dma_linked_lch[chain_id].no_of_lchs_linked; i++) {
 
 		/* Stop the Channel transmission */
-		l = dma_read(CCR(channels[i]));
+		l = p->dma_read(CCR, channels[i]);
 		l &= ~(1 << 7);
-		dma_write(l, CCR(channels[i]));
+		p->dma_write(l, CCR, channels[i]);
 
 		/* Disable the link in all the channels */
 		disable_lnk(channels[i]);
@@ -1753,8 +1650,8 @@ int omap_stop_dma_chain_transfers(int chain_id)
 	/* Reset the Queue pointers */
 	OMAP_DMA_CHAIN_QINIT(chain_id);
 
-	/* Errata - put in the old value */
-	dma_write(sys_cf, OCP_SYSCONFIG);
+	if (IS_DMA_ERRATA(DMA_ERRATA_i88))
+		p->dma_write(sys_cf, OCP_SYSCONFIG, 0);
 
 	return 0;
 }
@@ -1796,8 +1693,8 @@ int omap_get_dma_chain_index(int chain_id, int *ei, int *fi)
 	/* Get the current channel */
 	lch = channels[dma_linked_lch[chain_id].q_head];
 
-	*ei = dma_read(CCEN(lch));
-	*fi = dma_read(CCFN(lch));
+	*ei = p->dma_read(CCEN, lch);
+	*fi = p->dma_read(CCFN, lch);
 
 	return 0;
 }
@@ -1834,7 +1731,7 @@ int omap_get_dma_chain_dst_pos(int chain_id)
 	/* Get the current channel */
 	lch = channels[dma_linked_lch[chain_id].q_head];
 
-	return dma_read(CDAC(lch));
+	return p->dma_read(CDAC, lch);
 }
 EXPORT_SYMBOL(omap_get_dma_chain_dst_pos);
 
@@ -1868,7 +1765,7 @@ int omap_get_dma_chain_src_pos(int chain_id)
 	/* Get the current channel */
 	lch = channels[dma_linked_lch[chain_id].q_head];
 
-	return dma_read(CSAC(lch));
+	return p->dma_read(CSAC, lch);
 }
 EXPORT_SYMBOL(omap_get_dma_chain_src_pos);
 #endif	/* ifndef CONFIG_ARCH_OMAP1 */
@@ -1885,7 +1782,7 @@ static int omap1_dma_handle_ch(int ch)
 		csr = dma_chan[ch].saved_csr;
 		dma_chan[ch].saved_csr = 0;
 	} else
-		csr = dma_read(CSR(ch));
+		csr = p->dma_read(CSR, ch);
 	if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
 		dma_chan[ch + 6].saved_csr = csr >> 7;
 		csr &= 0x7f;
@@ -1938,13 +1835,13 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 
 static int omap2_dma_handle_ch(int ch)
 {
-	u32 status = dma_read(CSR(ch));
+	u32 status = p->dma_read(CSR, ch);
 
 	if (!status) {
 		if (printk_ratelimit())
 			printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n",
 				ch);
-		dma_write(1 << ch, IRQSTATUS_L0);
+		p->dma_write(1 << ch, IRQSTATUS_L0, ch);
 		return 0;
 	}
 	if (unlikely(dma_chan[ch].dev_id == -1)) {
@@ -1960,17 +1857,12 @@ static int omap2_dma_handle_ch(int ch)
 	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
 		printk(KERN_INFO "DMA transaction error with device %d\n",
 		       dma_chan[ch].dev_id);
-		if (cpu_class_is_omap2()) {
-			/*
-			 * Errata: sDMA Channel is not disabled
-			 * after a transaction error. So we explicitely
-			 * disable the channel
-			 */
+		if (IS_DMA_ERRATA(DMA_ERRATA_i378)) {
 			u32 ccr;
 
-			ccr = dma_read(CCR(ch));
+			ccr = p->dma_read(CCR, ch);
 			ccr &= ~OMAP_DMA_CCR_EN;
-			dma_write(ccr, CCR(ch));
+			p->dma_write(ccr, CCR, ch);
 			dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
 		}
 	}
@@ -1981,14 +1873,16 @@ static int omap2_dma_handle_ch(int ch)
 		printk(KERN_INFO "DMA misaligned error with device %d\n",
 		       dma_chan[ch].dev_id);
 
-	dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
-	dma_write(1 << ch, IRQSTATUS_L0);
+	p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, ch);
+	p->dma_write(1 << ch, IRQSTATUS_L0, ch);
+	/* read back the register to flush the write */
+	p->dma_read(IRQSTATUS_L0, ch);
 
 	/* If the ch is not chained then chain_id will be -1 */
 	if (dma_chan[ch].chain_id != -1) {
 		int chain_id = dma_chan[ch].chain_id;
 		dma_chan[ch].state = DMA_CH_NOTSTARTED;
-		if (dma_read(CLNK_CTRL(ch)) & (1 << 15))
+		if (p->dma_read(CLNK_CTRL, ch) & (1 << 15))
 			dma_chan[dma_chan[ch].next_linked_ch].state =
 							DMA_CH_STARTED;
 		if (dma_linked_lch[chain_id].chain_mode ==
@@ -1998,10 +1892,10 @@ static int omap2_dma_handle_ch(int ch)
 		if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
 			OMAP_DMA_CHAIN_INCQHEAD(chain_id);
 
-		status = dma_read(CSR(ch));
+		status = p->dma_read(CSR, ch);
 	}
 
-	dma_write(status, CSR(ch));
+	p->dma_write(status, CSR, ch);
 
 	if (likely(dma_chan[ch].callback != NULL))
 		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
@@ -2015,13 +1909,13 @@ static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
 	u32 val, enable_reg;
 	int i;
 
-	val = dma_read(IRQSTATUS_L0);
+	val = p->dma_read(IRQSTATUS_L0, 0);
 	if (val == 0) {
 		if (printk_ratelimit())
 			printk(KERN_WARNING "Spurious DMA IRQ\n");
 		return IRQ_HANDLED;
 	}
-	enable_reg = dma_read(IRQENABLE_L0);
+	enable_reg = p->dma_read(IRQENABLE_L0, 0);
 	val &= enable_reg; /* Dispatch only relevant interrupts */
 	for (i = 0; i < dma_lch_count && val != 0; i++) {
 		if (val & 1)
@@ -2047,119 +1941,66 @@ static struct irqaction omap24xx_dma_irq;
 void omap_dma_global_context_save(void)
 {
 	omap_dma_global_context.dma_irqenable_l0 =
-		dma_read(IRQENABLE_L0);
+		p->dma_read(IRQENABLE_L0, 0);
 	omap_dma_global_context.dma_ocp_sysconfig =
-		dma_read(OCP_SYSCONFIG);
-	omap_dma_global_context.dma_gcr = dma_read(GCR);
+		p->dma_read(OCP_SYSCONFIG, 0);
+	omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
 }
 
 void omap_dma_global_context_restore(void)
 {
 	int ch;
 
-	dma_write(omap_dma_global_context.dma_gcr, GCR);
-	dma_write(omap_dma_global_context.dma_ocp_sysconfig,
-		OCP_SYSCONFIG);
-	dma_write(omap_dma_global_context.dma_irqenable_l0,
-		IRQENABLE_L0);
+	p->dma_write(omap_dma_global_context.dma_gcr, GCR, 0);
+	p->dma_write(omap_dma_global_context.dma_ocp_sysconfig,
+		OCP_SYSCONFIG, 0);
+	p->dma_write(omap_dma_global_context.dma_irqenable_l0,
+		IRQENABLE_L0, 0);
 
-	/*
-	 * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
-	 * after secure sram context save and restore. Hence we need to
-	 * manually clear those IRQs to avoid spurious interrupts. This
-	 * affects only secure devices.
-	 */
-	if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
-		dma_write(0x3 , IRQSTATUS_L0);
+	if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
+		p->dma_write(0x3 , IRQSTATUS_L0, 0);
 
 	for (ch = 0; ch < dma_chan_count; ch++)
 		if (dma_chan[ch].dev_id != -1)
 			omap_clear_dma(ch);
 }
 
-/*----------------------------------------------------------------------------*/
-
-static int __init omap_init_dma(void)
+static int __devinit omap_system_dma_probe(struct platform_device *pdev)
 {
-	unsigned long base;
-	int ch, r;
-
-	if (cpu_class_is_omap1()) {
-		base = OMAP1_DMA_BASE;
-		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
-	} else if (cpu_is_omap24xx()) {
-		base = OMAP24XX_DMA4_BASE;
-		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
-	} else if (cpu_is_omap34xx()) {
-		base = OMAP34XX_DMA4_BASE;
-		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
-	} else if (cpu_is_omap44xx()) {
-		base = OMAP44XX_DMA4_BASE;
-		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
-	} else {
-		pr_err("DMA init failed for unsupported omap\n");
-		return -ENODEV;
+	int ch, ret = 0;
+	int dma_irq;
+	char irq_name[4];
+	int irq_rel;
+
+	p = pdev->dev.platform_data;
+	if (!p) {
+		dev_err(&pdev->dev, "%s: System DMA initialized without"
+			"platform data\n", __func__);
+		return -EINVAL;
 	}
 
-	omap_dma_base = ioremap(base, SZ_4K);
-	BUG_ON(!omap_dma_base);
+	d			= p->dma_attr;
+	errata			= p->errata;
 
-	if (cpu_class_is_omap2() && omap_dma_reserve_channels
+	if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels
 			&& (omap_dma_reserve_channels <= dma_lch_count))
-		dma_lch_count = omap_dma_reserve_channels;
+		d->lch_count	= omap_dma_reserve_channels;
 
-	dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
-				GFP_KERNEL);
-	if (!dma_chan) {
-		r = -ENOMEM;
-		goto out_unmap;
-	}
+	dma_lch_count		= d->lch_count;
+	dma_chan_count		= dma_lch_count;
+	dma_chan		= d->chan;
+	enable_1510_mode	= d->dev_caps & ENABLE_1510_MODE;
 
 	if (cpu_class_is_omap2()) {
 		dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
 						dma_lch_count, GFP_KERNEL);
 		if (!dma_linked_lch) {
-			r = -ENOMEM;
-			goto out_free;
+			ret = -ENOMEM;
+			goto exit_dma_lch_fail;
 		}
 	}
 
-	if (cpu_is_omap15xx()) {
-		printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
-		dma_chan_count = 9;
-		enable_1510_mode = 1;
-	} else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
-		printk(KERN_INFO "OMAP DMA hardware version %d\n",
-		       dma_read(HW_ID));
-		printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
-		       (dma_read(CAPS_0_U) << 16) |
-		       dma_read(CAPS_0_L),
-		       (dma_read(CAPS_1_U) << 16) |
-		       dma_read(CAPS_1_L),
-		       dma_read(CAPS_2), dma_read(CAPS_3),
-		       dma_read(CAPS_4));
-		if (!enable_1510_mode) {
-			u16 w;
-
-			/* Disable OMAP 3.0/3.1 compatibility mode. */
-			w = dma_read(GSCR);
-			w |= 1 << 3;
-			dma_write(w, GSCR);
-			dma_chan_count = 16;
-		} else
-			dma_chan_count = 9;
-	} else if (cpu_class_is_omap2()) {
-		u8 revision = dma_read(REVISION) & 0xff;
-		printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
-		       revision >> 4, revision & 0xf);
-		dma_chan_count = dma_lch_count;
-	} else {
-		dma_chan_count = 0;
-		return 0;
-	}
-
 	spin_lock_init(&dma_chan_lock);
-
 	for (ch = 0; ch < dma_chan_count; ch++) {
 		omap_clear_dma(ch);
 		if (cpu_class_is_omap2())
@@ -2176,20 +2017,23 @@ static int __init omap_init_dma(void)
 			 * request_irq() doesn't like dev_id (ie. ch) being
 			 * zero, so we have to kludge around this.
 			 */
-			r = request_irq(omap1_dma_irq[ch],
+			sprintf(&irq_name[0], "%d", ch);
+			dma_irq = platform_get_irq_byname(pdev, irq_name);
+
+			if (dma_irq < 0) {
+				ret = dma_irq;
+				goto exit_dma_irq_fail;
+			}
+
+			/* INT_DMA_LCD is handled in lcd_dma.c */
+			if (dma_irq == INT_DMA_LCD)
+				continue;
+
+			ret = request_irq(dma_irq,
 					omap1_dma_irq_handler, 0, "DMA",
 					(void *) (ch + 1));
-			if (r != 0) {
-				int i;
-
-				printk(KERN_ERR "unable to request IRQ %d "
-				       "for DMA (error %d)\n",
-				       omap1_dma_irq[ch], r);
-				for (i = 0; i < ch; i++)
-					free_irq(omap1_dma_irq[i],
-						 (void *) (i + 1));
-				goto out_free;
-			}
+			if (ret != 0)
+				goto exit_dma_irq_fail;
 		}
 	}
 
@@ -2198,46 +2042,91 @@ static int __init omap_init_dma(void)
 				DMA_DEFAULT_FIFO_DEPTH, 0);
 
 	if (cpu_class_is_omap2()) {
-		int irq;
-		if (cpu_is_omap44xx())
-			irq = OMAP44XX_IRQ_SDMA_0;
-		else
-			irq = INT_24XX_SDMA_IRQ0;
-		setup_irq(irq, &omap24xx_dma_irq);
-	}
-
-	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		/* Enable smartidle idlemodes and autoidle */
-		u32 v = dma_read(OCP_SYSCONFIG);
-		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
-				DMA_SYSCONFIG_SIDLEMODE_MASK |
-				DMA_SYSCONFIG_AUTOIDLE);
-		v |= (DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
-			DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
-			DMA_SYSCONFIG_AUTOIDLE);
-		dma_write(v , OCP_SYSCONFIG);
-		/* reserve dma channels 0 and 1 in high security devices */
-		if (cpu_is_omap34xx() &&
-			(omap_type() != OMAP2_DEVICE_TYPE_GP)) {
-			printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
-					"HS ROM code\n");
-			dma_chan[0].dev_id = 0;
-			dma_chan[1].dev_id = 1;
+		strcpy(irq_name, "0");
+		dma_irq = platform_get_irq_byname(pdev, irq_name);
+		if (dma_irq < 0) {
+			dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
+			goto exit_dma_lch_fail;
+		}
+		ret = setup_irq(dma_irq, &omap24xx_dma_irq);
+		if (ret) {
+			dev_err(&pdev->dev, "set_up failed for IRQ %d"
+				"for DMA (error %d)\n", dma_irq, ret);
+			goto exit_dma_lch_fail;
 		}
 	}
 
+	/* reserve dma channels 0 and 1 in high security devices */
+	if (cpu_is_omap34xx() &&
+		(omap_type() != OMAP2_DEVICE_TYPE_GP)) {
+		printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
+				"HS ROM code\n");
+		dma_chan[0].dev_id = 0;
+		dma_chan[1].dev_id = 1;
+	}
+	p->show_dma_caps();
 	return 0;
 
-out_free:
+exit_dma_irq_fail:
+	dev_err(&pdev->dev, "unable to request IRQ %d"
+			"for DMA (error %d)\n", dma_irq, ret);
+	for (irq_rel = 0; irq_rel < ch;	irq_rel++) {
+		dma_irq = platform_get_irq(pdev, irq_rel);
+		free_irq(dma_irq, (void *)(irq_rel + 1));
+	}
+
+exit_dma_lch_fail:
+	kfree(p);
+	kfree(d);
 	kfree(dma_chan);
+	return ret;
+}
 
-out_unmap:
-	iounmap(omap_dma_base);
+static int __devexit omap_system_dma_remove(struct platform_device *pdev)
+{
+	int dma_irq;
 
-	return r;
+	if (cpu_class_is_omap2()) {
+		char irq_name[4];
+		strcpy(irq_name, "0");
+		dma_irq = platform_get_irq_byname(pdev, irq_name);
+		remove_irq(dma_irq, &omap24xx_dma_irq);
+	} else {
+		int irq_rel = 0;
+		for ( ; irq_rel < dma_chan_count; irq_rel++) {
+			dma_irq = platform_get_irq(pdev, irq_rel);
+			free_irq(dma_irq, (void *)(irq_rel + 1));
+		}
+	}
+	kfree(p);
+	kfree(d);
+	kfree(dma_chan);
+	return 0;
+}
+
+static struct platform_driver omap_system_dma_driver = {
+	.probe		= omap_system_dma_probe,
+	.remove		= omap_system_dma_remove,
+	.driver		= {
+		.name	= "omap_dma_system"
+	},
+};
+
+static int __init omap_system_dma_init(void)
+{
+	return platform_driver_register(&omap_system_dma_driver);
+}
+arch_initcall(omap_system_dma_init);
+
+static void __exit omap_system_dma_exit(void)
+{
+	platform_driver_unregister(&omap_system_dma_driver);
 }
 
-arch_initcall(omap_init_dma);
+MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_AUTHOR("Texas Instruments Inc");
 
 /*
  * Reserve the omap SDMA channels using cmdline bootarg
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index c05c653d167..1f98e0b9484 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -21,18 +21,18 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <asm/mach/irq.h>
-#include <plat/powerdomain.h>
 
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		0xfffce000
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -46,10 +46,6 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		0xfffbe400
-#define OMAP1610_GPIO2_BASE		0xfffbec00
-#define OMAP1610_GPIO3_BASE		0xfffbb400
-#define OMAP1610_GPIO4_BASE		0xfffbbc00
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
@@ -71,12 +67,6 @@
 /*
  * OMAP7XX specific GPIO registers
  */
-#define OMAP7XX_GPIO1_BASE		0xfffbc000
-#define OMAP7XX_GPIO2_BASE		0xfffbc800
-#define OMAP7XX_GPIO3_BASE		0xfffbd000
-#define OMAP7XX_GPIO4_BASE		0xfffbd800
-#define OMAP7XX_GPIO5_BASE		0xfffbe000
-#define OMAP7XX_GPIO6_BASE		0xfffbe800
 #define OMAP7XX_GPIO_DATA_INPUT		0x00
 #define OMAP7XX_GPIO_DATA_OUTPUT	0x04
 #define OMAP7XX_GPIO_DIR_CONTROL	0x08
@@ -84,25 +74,10 @@
 #define OMAP7XX_GPIO_INT_MASK		0x10
 #define OMAP7XX_GPIO_INT_STATUS		0x14
 
-#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
-
 /*
- * omap24xx specific GPIO registers
+ * omap2+ specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE		0x48018000
-#define OMAP242X_GPIO2_BASE		0x4801a000
-#define OMAP242X_GPIO3_BASE		0x4801c000
-#define OMAP242X_GPIO4_BASE		0x4801e000
-
-#define OMAP243X_GPIO1_BASE		0x4900C000
-#define OMAP243X_GPIO2_BASE		0x4900E000
-#define OMAP243X_GPIO3_BASE		0x49010000
-#define OMAP243X_GPIO4_BASE		0x49012000
-#define OMAP243X_GPIO5_BASE		0x480B6000
-
 #define OMAP24XX_GPIO_REVISION		0x0000
-#define OMAP24XX_GPIO_SYSCONFIG		0x0010
-#define OMAP24XX_GPIO_SYSSTATUS		0x0014
 #define OMAP24XX_GPIO_IRQSTATUS1	0x0018
 #define OMAP24XX_GPIO_IRQSTATUS2	0x0028
 #define OMAP24XX_GPIO_IRQENABLE2	0x002c
@@ -126,7 +101,6 @@
 #define OMAP24XX_GPIO_SETDATAOUT	0x0094
 
 #define OMAP4_GPIO_REVISION		0x0000
-#define OMAP4_GPIO_SYSCONFIG		0x0010
 #define OMAP4_GPIO_EOI			0x0020
 #define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
 #define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
@@ -138,7 +112,6 @@
 #define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
 #define OMAP4_GPIO_IRQWAKEN0		0x0044
 #define OMAP4_GPIO_IRQWAKEN1		0x0048
-#define OMAP4_GPIO_SYSSTATUS		0x0114
 #define OMAP4_GPIO_IRQENABLE1		0x011c
 #define OMAP4_GPIO_WAKE_EN		0x0120
 #define OMAP4_GPIO_IRQSTATUS2		0x0128
@@ -159,26 +132,6 @@
 #define OMAP4_GPIO_SETWKUENA		0x0184
 #define OMAP4_GPIO_CLEARDATAOUT		0x0190
 #define OMAP4_GPIO_SETDATAOUT		0x0194
-/*
- * omap34xx specific GPIO registers
- */
-
-#define OMAP34XX_GPIO1_BASE		0x48310000
-#define OMAP34XX_GPIO2_BASE		0x49050000
-#define OMAP34XX_GPIO3_BASE		0x49052000
-#define OMAP34XX_GPIO4_BASE		0x49054000
-#define OMAP34XX_GPIO5_BASE		0x49056000
-#define OMAP34XX_GPIO6_BASE		0x49058000
-
-/*
- * OMAP44XX  specific GPIO registers
- */
-#define OMAP44XX_GPIO1_BASE             0x4a310000
-#define OMAP44XX_GPIO2_BASE             0x48055000
-#define OMAP44XX_GPIO3_BASE             0x48057000
-#define OMAP44XX_GPIO4_BASE             0x48059000
-#define OMAP44XX_GPIO5_BASE             0x4805B000
-#define OMAP44XX_GPIO6_BASE             0x4805D000
 
 struct gpio_bank {
 	unsigned long pbase;
@@ -190,14 +143,12 @@ struct gpio_bank {
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
 #endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
 	u32 non_wakeup_gpios;
 	u32 enabled_non_wakeup_gpios;
 
 	u32 saved_datain;
 	u32 saved_fallingdetect;
 	u32 saved_risingdetect;
-#endif
 	u32 level_mask;
 	u32 toggle_mask;
 	spinlock_t lock;
@@ -205,104 +156,13 @@ struct gpio_bank {
 	struct clk *dbck;
 	u32 mod_usage;
 	u32 dbck_enable_mask;
+	struct device *dev;
+	bool dbck_flag;
+	int stride;
 };
 
-#define METHOD_MPUIO		0
-#define METHOD_GPIO_1510	1
-#define METHOD_GPIO_1610	2
-#define METHOD_GPIO_7XX		3
-#define METHOD_GPIO_24XX	5
-#define METHOD_GPIO_44XX	6
-
-#ifdef CONFIG_ARCH_OMAP16XX
-static struct gpio_bank gpio_bank_1610[5] = {
-	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
-		METHOD_MPUIO },
-	{ OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16,
-		METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32,
-		METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48,
-		METHOD_GPIO_1610 },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP15XX
-static struct gpio_bank gpio_bank_1510[2] = {
-	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
-		METHOD_MPUIO },
-	{ OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_1510 }
-};
-#endif
-
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-static struct gpio_bank gpio_bank_7xx[7] = {
-	{ OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE,
-		METHOD_MPUIO },
-	{ OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_7XX },
-	{ OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_7XX },
-	{ OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_7XX },
-	{ OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4,  IH_GPIO_BASE + 96,
-		METHOD_GPIO_7XX },
-	{ OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5,  IH_GPIO_BASE + 128,
-		METHOD_GPIO_7XX },
-	{ OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6,  IH_GPIO_BASE + 160,
-		METHOD_GPIO_7XX },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2
-
-static struct gpio_bank gpio_bank_242x[4] = {
-	{ OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
-		METHOD_GPIO_24XX },
-};
-
-static struct gpio_bank gpio_bank_243x[5] = {
-	{ OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
-		METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
-		METHOD_GPIO_24XX },
-};
-
-#endif
-
 #ifdef CONFIG_ARCH_OMAP3
-static struct gpio_bank gpio_bank_34xx[6] = {
-	{ OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
-		METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,
-		METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128,
-		METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160,
-		METHOD_GPIO_24XX },
-};
-
 struct omap3_gpio_regs {
-	u32 sysconfig;
 	u32 irqenable1;
 	u32 irqenable2;
 	u32 wake_en;
@@ -318,26 +178,16 @@ struct omap3_gpio_regs {
 static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
 #endif
 
-#ifdef CONFIG_ARCH_OMAP4
-static struct gpio_bank gpio_bank_44xx[6] = {
-	{ OMAP44XX_GPIO1_BASE, NULL, OMAP44XX_IRQ_GPIO1, IH_GPIO_BASE,
-		METHOD_GPIO_44XX },
-	{ OMAP44XX_GPIO2_BASE, NULL, OMAP44XX_IRQ_GPIO2, IH_GPIO_BASE + 32,
-		METHOD_GPIO_44XX },
-	{ OMAP44XX_GPIO3_BASE, NULL, OMAP44XX_IRQ_GPIO3, IH_GPIO_BASE + 64,
-		METHOD_GPIO_44XX },
-	{ OMAP44XX_GPIO4_BASE, NULL, OMAP44XX_IRQ_GPIO4, IH_GPIO_BASE + 96,
-		METHOD_GPIO_44XX },
-	{ OMAP44XX_GPIO5_BASE, NULL, OMAP44XX_IRQ_GPIO5, IH_GPIO_BASE + 128,
-		METHOD_GPIO_44XX },
-	{ OMAP44XX_GPIO6_BASE, NULL, OMAP44XX_IRQ_GPIO6, IH_GPIO_BASE + 160,
-		METHOD_GPIO_44XX },
-};
+/*
+ * TODO: Cleanup gpio_bank usage as it is having information
+ * related to all instances of the device
+ */
+static struct gpio_bank *gpio_bank;
 
-#endif
+static int bank_width;
 
-static struct gpio_bank *gpio_bank;
-static int gpio_bank_count;
+/* TODO: Analyze removing gpio_bank_count usage from driver code */
+int gpio_bank_count;
 
 static inline struct gpio_bank *get_gpio_bank(int gpio)
 {
@@ -417,7 +267,7 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL;
+		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -465,7 +315,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_OUTPUT;
+		reg += OMAP_MPUIO_OUTPUT / bank->stride;
 		l = __raw_readl(reg);
 		if (enable)
 			l |= 1 << gpio;
@@ -537,7 +387,7 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_INPUT_LATCH;
+		reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -583,7 +433,7 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_OUTPUT;
+		reg += OMAP_MPUIO_OUTPUT / bank->stride;
 		break;
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -642,6 +492,9 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 	u32			val;
 	u32			l;
 
+	if (!bank->dbck_flag)
+		return;
+
 	if (debounce < 32)
 		debounce = 0x01;
 	else if (debounce > 7936)
@@ -651,7 +504,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 
 	l = 1 << get_gpio_index(gpio);
 
-	if (cpu_is_omap44xx())
+	if (bank->method == METHOD_GPIO_44XX)
 		reg += OMAP4_GPIO_DEBOUNCINGTIME;
 	else
 		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
@@ -659,7 +512,7 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 	__raw_writel(debounce, reg);
 
 	reg = bank->base;
-	if (cpu_is_omap44xx())
+	if (bank->method == METHOD_GPIO_44XX)
 		reg += OMAP4_GPIO_DEBOUNCENABLE;
 	else
 		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
@@ -668,12 +521,10 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
 
 	if (debounce) {
 		val |= l;
-		if (cpu_is_omap34xx() || cpu_is_omap44xx())
-			clk_enable(bank->dbck);
+		clk_enable(bank->dbck);
 	} else {
 		val &= ~l;
-		if (cpu_is_omap34xx() || cpu_is_omap44xx())
-			clk_disable(bank->dbck);
+		clk_disable(bank->dbck);
 	}
 	bank->dbck_enable_mask = val;
 
@@ -769,7 +620,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 
 	switch (bank->method) {
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_INT_EDGE;
+		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
 		break;
 #ifdef CONFIG_ARCH_OMAP15XX
 	case METHOD_GPIO_1510:
@@ -803,7 +654,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_INT_EDGE;
+		reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
 		l = __raw_readl(reg);
 		if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 			bank->toggle_mask |= 1 << gpio;
@@ -989,7 +840,7 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_MASKIT;
+		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
 		mask = 0xffff;
 		inv = 1;
 		break;
@@ -1046,7 +897,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_GPIO_MASKIT;
+		reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
 		l = __raw_readl(reg);
 		if (enable)
 			l &= ~(gpio_mask);
@@ -1296,7 +1147,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	bank = get_irq_data(irq);
 #ifdef CONFIG_ARCH_OMAP1
 	if (bank->method == METHOD_MPUIO)
-		isr_reg = bank->base + OMAP_MPUIO_GPIO_INT;
+		isr_reg = bank->base +
+				OMAP_MPUIO_GPIO_INT / bank->stride;
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510)
@@ -1318,6 +1170,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_44XX)
 		isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
 #endif
+
+	if (WARN_ON(!isr_reg))
+		goto exit;
+
 	while(1) {
 		u32 isr_saved, level_mask = 0;
 		u32 enabled;
@@ -1377,6 +1233,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	configured, we must unmask the bank interrupt only after
 	handler(s) are executed in order to avoid spurious bank
 	interrupt */
+exit:
 	if (!unmasked)
 		desc->chip->unmask(irq);
 
@@ -1489,7 +1346,8 @@ static int omap_mpuio_suspend_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
-	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+	void __iomem		*mask_reg = bank->base +
+					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
 	unsigned long		flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
@@ -1504,7 +1362,8 @@ static int omap_mpuio_resume_noirq(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
-	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+	void __iomem		*mask_reg = bank->base +
+					OMAP_MPUIO_GPIO_MASKIT / bank->stride;
 	unsigned long		flags;
 
 	spin_lock_irqsave(&bank->lock, flags);
@@ -1540,7 +1399,8 @@ static struct platform_device omap_mpuio_device = {
 
 static inline void mpuio_init(void)
 {
-	platform_set_drvdata(&omap_mpuio_device, &gpio_bank_1610[0]);
+	struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0));
+	platform_set_drvdata(&omap_mpuio_device, bank);
 
 	if (platform_driver_register(&omap_mpuio_driver) == 0)
 		(void) platform_device_register(&omap_mpuio_device);
@@ -1583,7 +1443,7 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 
 	switch (bank->method) {
 	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL;
+		reg += OMAP_MPUIO_IO_CNTL / bank->stride;
 		break;
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_DIR_CONTROL;
@@ -1645,6 +1505,13 @@ static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
 	unsigned long flags;
 
 	bank = container_of(chip, struct gpio_bank, chip);
+
+	if (!bank->dbck) {
+		bank->dbck = clk_get(bank->dev, "dbclk");
+		if (IS_ERR(bank->dbck))
+			dev_err(bank->dev, "Could not get gpio dbck\n");
+	}
+
 	spin_lock_irqsave(&bank->lock, flags);
 	_set_gpio_debounce(bank, offset, debounce);
 	spin_unlock_irqrestore(&bank->lock, flags);
@@ -1673,34 +1540,16 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
 
 /*---------------------------------------------------------------------*/
 
-static int initialized;
-#if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP2)
-static struct clk * gpio_ick;
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2)
-static struct clk * gpio_fck;
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2430)
-static struct clk * gpio5_ick;
-static struct clk * gpio5_fck;
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
-#endif
-
-static void __init omap_gpio_show_rev(void)
+static void __init omap_gpio_show_rev(struct gpio_bank *bank)
 {
 	u32 rev;
 
-	if (cpu_is_omap16xx())
-		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
+	if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO))
+		rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION);
 	else if (cpu_is_omap24xx() || cpu_is_omap34xx())
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION);
 	else if (cpu_is_omap44xx())
-		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
+		rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION);
 	else
 		return;
 
@@ -1713,250 +1562,190 @@ static void __init omap_gpio_show_rev(void)
  */
 static struct lock_class_key gpio_lock_class;
 
-static int __init _omap_gpio_init(void)
+static inline int init_gpio_info(struct platform_device *pdev)
 {
-	int i;
-	int gpio = 0;
-	struct gpio_bank *bank;
-	int bank_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
-	char clk_name[11];
-
-	initialized = 1;
-
-#if defined(CONFIG_ARCH_OMAP1)
-	if (cpu_is_omap15xx()) {
-		gpio_ick = clk_get(NULL, "arm_gpio_ck");
-		if (IS_ERR(gpio_ick))
-			printk("Could not get arm_gpio_ck\n");
-		else
-			clk_enable(gpio_ick);
+	/* TODO: Analyze removing gpio_bank_count usage from driver code */
+	gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank),
+				GFP_KERNEL);
+	if (!gpio_bank) {
+		dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
+		return -ENOMEM;
 	}
-#endif
-#if defined(CONFIG_ARCH_OMAP2)
-	if (cpu_class_is_omap2()) {
-		gpio_ick = clk_get(NULL, "gpios_ick");
-		if (IS_ERR(gpio_ick))
-			printk("Could not get gpios_ick\n");
-		else
-			clk_enable(gpio_ick);
-		gpio_fck = clk_get(NULL, "gpios_fck");
-		if (IS_ERR(gpio_fck))
-			printk("Could not get gpios_fck\n");
-		else
-			clk_enable(gpio_fck);
+	return 0;
+}
 
-		/*
-		 * On 2430 & 3430 GPIO 5 uses CORE L4 ICLK
-		 */
-#if defined(CONFIG_ARCH_OMAP2430)
-		if (cpu_is_omap2430()) {
-			gpio5_ick = clk_get(NULL, "gpio5_ick");
-			if (IS_ERR(gpio5_ick))
-				printk("Could not get gpio5_ick\n");
-			else
-				clk_enable(gpio5_ick);
-			gpio5_fck = clk_get(NULL, "gpio5_fck");
-			if (IS_ERR(gpio5_fck))
-				printk("Could not get gpio5_fck\n");
-			else
-				clk_enable(gpio5_fck);
+/* TODO: Cleanup cpu_is_* checks */
+static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
+{
+	if (cpu_class_is_omap2()) {
+		if (cpu_is_omap44xx()) {
+			__raw_writel(0xffffffff, bank->base +
+					OMAP4_GPIO_IRQSTATUSCLR0);
+			__raw_writel(0x00000000, bank->base +
+					 OMAP4_GPIO_DEBOUNCENABLE);
+			/* Initialize interface clk ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
+		} else if (cpu_is_omap34xx()) {
+			__raw_writel(0x00000000, bank->base +
+					OMAP24XX_GPIO_IRQENABLE1);
+			__raw_writel(0xffffffff, bank->base +
+					OMAP24XX_GPIO_IRQSTATUS1);
+			__raw_writel(0x00000000, bank->base +
+					OMAP24XX_GPIO_DEBOUNCE_EN);
+
+			/* Initialize interface clk ungated, module enabled */
+			__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
+		} else if (cpu_is_omap24xx()) {
+			static const u32 non_wakeup_gpios[] = {
+				0xe203ffc0, 0x08700040
+			};
+			if (id < ARRAY_SIZE(non_wakeup_gpios))
+				bank->non_wakeup_gpios = non_wakeup_gpios[id];
 		}
-#endif
-	}
-#endif
+	} else if (cpu_class_is_omap1()) {
+		if (bank_is_mpuio(bank))
+			__raw_writew(0xffff, bank->base +
+				OMAP_MPUIO_GPIO_MASKIT / bank->stride);
+		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
+			__raw_writew(0xffff, bank->base
+						+ OMAP1510_GPIO_INT_MASK);
+			__raw_writew(0x0000, bank->base
+						+ OMAP1510_GPIO_INT_STATUS);
+		}
+		if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
+			__raw_writew(0x0000, bank->base
+						+ OMAP1610_GPIO_IRQENABLE1);
+			__raw_writew(0xffff, bank->base
+						+ OMAP1610_GPIO_IRQSTATUS1);
+			__raw_writew(0x0014, bank->base
+						+ OMAP1610_GPIO_SYSCONFIG);
 
-#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-		for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
-			sprintf(clk_name, "gpio%d_ick", i + 1);
-			gpio_iclks[i] = clk_get(NULL, clk_name);
-			if (IS_ERR(gpio_iclks[i]))
-				printk(KERN_ERR "Could not get %s\n", clk_name);
-			else
-				clk_enable(gpio_iclks[i]);
+			/*
+			 * Enable system clock for GPIO module.
+			 * The CAM_CLK_CTRL *is* really the right place.
+			 */
+			omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
+						ULPD_CAM_CLK_CTRL);
+		}
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+			__raw_writel(0xffffffff, bank->base
+						+ OMAP7XX_GPIO_INT_MASK);
+			__raw_writel(0x00000000, bank->base
+						+ OMAP7XX_GPIO_INT_STATUS);
 		}
 	}
-#endif
+}
 
+static void __init omap_gpio_chip_init(struct gpio_bank *bank)
+{
+	int j;
+	static int gpio;
 
-#ifdef CONFIG_ARCH_OMAP15XX
-	if (cpu_is_omap15xx()) {
-		gpio_bank_count = 2;
-		gpio_bank = gpio_bank_1510;
-		bank_size = SZ_2K;
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
-	if (cpu_is_omap16xx()) {
-		gpio_bank_count = 5;
-		gpio_bank = gpio_bank_1610;
-		bank_size = SZ_2K;
-	}
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
-	if (cpu_is_omap7xx()) {
-		gpio_bank_count = 7;
-		gpio_bank = gpio_bank_7xx;
-		bank_size = SZ_2K;
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP2
-	if (cpu_is_omap242x()) {
-		gpio_bank_count = 4;
-		gpio_bank = gpio_bank_242x;
-	}
-	if (cpu_is_omap243x()) {
-		gpio_bank_count = 5;
-		gpio_bank = gpio_bank_243x;
-	}
+	bank->mod_usage = 0;
+	/*
+	 * REVISIT eventually switch from OMAP-specific gpio structs
+	 * over to the generic ones
+	 */
+	bank->chip.request = omap_gpio_request;
+	bank->chip.free = omap_gpio_free;
+	bank->chip.direction_input = gpio_input;
+	bank->chip.get = gpio_get;
+	bank->chip.direction_output = gpio_output;
+	bank->chip.set_debounce = gpio_debounce;
+	bank->chip.set = gpio_set;
+	bank->chip.to_irq = gpio_2irq;
+	if (bank_is_mpuio(bank)) {
+		bank->chip.label = "mpuio";
+#ifdef CONFIG_ARCH_OMAP16XX
+		bank->chip.dev = &omap_mpuio_device.dev;
 #endif
-#ifdef CONFIG_ARCH_OMAP3
-	if (cpu_is_omap34xx()) {
-		gpio_bank_count = OMAP34XX_NR_GPIOS;
-		gpio_bank = gpio_bank_34xx;
+		bank->chip.base = OMAP_MPUIO(0);
+	} else {
+		bank->chip.label = "gpio";
+		bank->chip.base = gpio;
+		gpio += bank_width;
 	}
-#endif
-#ifdef CONFIG_ARCH_OMAP4
-	if (cpu_is_omap44xx()) {
-		gpio_bank_count = OMAP34XX_NR_GPIOS;
-		gpio_bank = gpio_bank_44xx;
+	bank->chip.ngpio = bank_width;
+
+	gpiochip_add(&bank->chip);
+
+	for (j = bank->virtual_irq_start;
+		     j < bank->virtual_irq_start + bank_width; j++) {
+		lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
+		set_irq_chip_data(j, bank);
+		if (bank_is_mpuio(bank))
+			set_irq_chip(j, &mpuio_irq_chip);
+		else
+			set_irq_chip(j, &gpio_irq_chip);
+		set_irq_handler(j, handle_simple_irq);
+		set_irq_flags(j, IRQF_VALID);
 	}
-#endif
-	for (i = 0; i < gpio_bank_count; i++) {
-		int j, gpio_count = 16;
+	set_irq_chained_handler(bank->irq, gpio_irq_handler);
+	set_irq_data(bank->irq, bank);
+}
+
+static int __devinit omap_gpio_probe(struct platform_device *pdev)
+{
+	static int gpio_init_done;
+	struct omap_gpio_platform_data *pdata;
+	struct resource *res;
+	int id;
+	struct gpio_bank *bank;
 
-		bank = &gpio_bank[i];
-		spin_lock_init(&bank->lock);
+	if (!pdev->dev.platform_data)
+		return -EINVAL;
 
-		/* Static mapping, never released */
-		bank->base = ioremap(bank->pbase, bank_size);
-		if (!bank->base) {
-			printk(KERN_ERR "Could not ioremap gpio bank%i\n", i);
-			continue;
-		}
+	pdata = pdev->dev.platform_data;
 
-		if (bank_is_mpuio(bank))
-			__raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
-		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
-			__raw_writew(0xffff, bank->base + OMAP1510_GPIO_INT_MASK);
-			__raw_writew(0x0000, bank->base + OMAP1510_GPIO_INT_STATUS);
-		}
-		if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
-			__raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1);
-			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
-			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
-		}
-		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
-			__raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK);
-			__raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS);
+	if (!gpio_init_done) {
+		int ret;
 
-			gpio_count = 32; /* 7xx has 32-bit GPIOs */
-		}
+		ret = init_gpio_info(pdev);
+		if (ret)
+			return ret;
+	}
 
-#ifdef CONFIG_ARCH_OMAP2PLUS
-		if ((bank->method == METHOD_GPIO_24XX) ||
-				(bank->method == METHOD_GPIO_44XX)) {
-			static const u32 non_wakeup_gpios[] = {
-				0xe203ffc0, 0x08700040
-			};
+	id = pdev->id;
+	bank = &gpio_bank[id];
 
-			if (cpu_is_omap44xx()) {
-				__raw_writel(0xffffffff, bank->base +
-						OMAP4_GPIO_IRQSTATUSCLR0);
-				__raw_writew(0x0015, bank->base +
-						OMAP4_GPIO_SYSCONFIG);
-				__raw_writel(0x00000000, bank->base +
-						 OMAP4_GPIO_DEBOUNCENABLE);
-				/*
-				 * Initialize interface clock ungated,
-				 * module enabled
-				 */
-				__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
-			} else {
-				__raw_writel(0x00000000, bank->base +
-						OMAP24XX_GPIO_IRQENABLE1);
-				__raw_writel(0xffffffff, bank->base +
-						OMAP24XX_GPIO_IRQSTATUS1);
-				__raw_writew(0x0015, bank->base +
-						OMAP24XX_GPIO_SYSCONFIG);
-				__raw_writel(0x00000000, bank->base +
-						OMAP24XX_GPIO_DEBOUNCE_EN);
-
-				/*
-				 * Initialize interface clock ungated,
-				 * module enabled
-				 */
-				__raw_writel(0, bank->base +
-						OMAP24XX_GPIO_CTRL);
-			}
-			if (cpu_is_omap24xx() &&
-			    i < ARRAY_SIZE(non_wakeup_gpios))
-				bank->non_wakeup_gpios = non_wakeup_gpios[i];
-			gpio_count = 32;
-		}
-#endif
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (unlikely(!res)) {
+		dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id);
+		return -ENODEV;
+	}
 
-		bank->mod_usage = 0;
-		/* REVISIT eventually switch from OMAP-specific gpio structs
-		 * over to the generic ones
-		 */
-		bank->chip.request = omap_gpio_request;
-		bank->chip.free = omap_gpio_free;
-		bank->chip.direction_input = gpio_input;
-		bank->chip.get = gpio_get;
-		bank->chip.direction_output = gpio_output;
-		bank->chip.set_debounce = gpio_debounce;
-		bank->chip.set = gpio_set;
-		bank->chip.to_irq = gpio_2irq;
-		if (bank_is_mpuio(bank)) {
-			bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP16XX
-			bank->chip.dev = &omap_mpuio_device.dev;
-#endif
-			bank->chip.base = OMAP_MPUIO(0);
-		} else {
-			bank->chip.label = "gpio";
-			bank->chip.base = gpio;
-			gpio += gpio_count;
-		}
-		bank->chip.ngpio = gpio_count;
+	bank->irq = res->start;
+	bank->virtual_irq_start = pdata->virtual_irq_start;
+	bank->method = pdata->bank_type;
+	bank->dev = &pdev->dev;
+	bank->dbck_flag = pdata->dbck_flag;
+	bank->stride = pdata->bank_stride;
+	bank_width = pdata->bank_width;
 
-		gpiochip_add(&bank->chip);
+	spin_lock_init(&bank->lock);
 
-		for (j = bank->virtual_irq_start;
-		     j < bank->virtual_irq_start + gpio_count; j++) {
-			lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
-			set_irq_chip_data(j, bank);
-			if (bank_is_mpuio(bank))
-				set_irq_chip(j, &mpuio_irq_chip);
-			else
-				set_irq_chip(j, &gpio_irq_chip);
-			set_irq_handler(j, handle_simple_irq);
-			set_irq_flags(j, IRQF_VALID);
-		}
-		set_irq_chained_handler(bank->irq, gpio_irq_handler);
-		set_irq_data(bank->irq, bank);
-
-		if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
-			sprintf(clk_name, "gpio%d_dbck", i + 1);
-			bank->dbck = clk_get(NULL, clk_name);
-			if (IS_ERR(bank->dbck))
-				printk(KERN_ERR "Could not get %s\n", clk_name);
-		}
+	/* Static mapping, never released */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(!res)) {
+		dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id);
+		return -ENODEV;
 	}
 
-	/* Enable system clock for GPIO module.
-	 * The CAM_CLK_CTRL *is* really the right place. */
-	if (cpu_is_omap16xx())
-		omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL);
+	bank->base = ioremap(res->start, resource_size(res));
+	if (!bank->base) {
+		dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id);
+		return -ENOMEM;
+	}
 
-	/* Enable autoidle for the OCP interface */
-	if (cpu_is_omap24xx())
-		omap_writel(1 << 0, 0x48019010);
-	if (cpu_is_omap34xx())
-		omap_writel(1 << 0, 0x48306814);
+	pm_runtime_enable(bank->dev);
+	pm_runtime_get_sync(bank->dev);
+
+	omap_gpio_mod_init(bank, id);
+	omap_gpio_chip_init(bank);
+	omap_gpio_show_rev(bank);
 
-	omap_gpio_show_rev();
+	if (!gpio_init_done)
+		gpio_init_done = 1;
 
 	return 0;
 }
@@ -2074,7 +1863,7 @@ static struct sys_device omap_gpio_device = {
 
 static int workaround_enabled;
 
-void omap2_gpio_prepare_for_idle(int power_state)
+void omap2_gpio_prepare_for_idle(int off_mode)
 {
 	int i, c = 0;
 	int min = 0;
@@ -2090,7 +1879,7 @@ void omap2_gpio_prepare_for_idle(int power_state)
 		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
 			clk_disable(bank->dbck);
 
-		if (power_state > PWRDM_POWER_OFF)
+		if (!off_mode)
 			continue;
 
 		/* If going to OFF, remove triggering for all
@@ -2251,8 +2040,6 @@ void omap_gpio_save_context(void)
 	/* saving banks from 2-6 only since GPIO1 is in WKUP */
 	for (i = 1; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		gpio_context[i].sysconfig =
-			__raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG);
 		gpio_context[i].irqenable1 =
 			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
 		gpio_context[i].irqenable2 =
@@ -2283,8 +2070,6 @@ void omap_gpio_restore_context(void)
 
 	for (i = 1; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
-		__raw_writel(gpio_context[i].sysconfig,
-				bank->base + OMAP24XX_GPIO_SYSCONFIG);
 		__raw_writel(gpio_context[i].irqenable1,
 				bank->base + OMAP24XX_GPIO_IRQENABLE1);
 		__raw_writel(gpio_context[i].irqenable2,
@@ -2309,25 +2094,28 @@ void omap_gpio_restore_context(void)
 }
 #endif
 
+static struct platform_driver omap_gpio_driver = {
+	.probe		= omap_gpio_probe,
+	.driver		= {
+		.name	= "omap_gpio",
+	},
+};
+
 /*
- * This may get called early from board specific init
- * for boards that have interrupts routed via FPGA.
+ * gpio driver register needs to be done before
+ * machine_init functions access gpio APIs.
+ * Hence omap_gpio_drv_reg() is a postcore_initcall.
  */
-int __init omap_gpio_init(void)
+static int __init omap_gpio_drv_reg(void)
 {
-	if (!initialized)
-		return _omap_gpio_init();
-	else
-		return 0;
+	return platform_driver_register(&omap_gpio_driver);
 }
+postcore_initcall(omap_gpio_drv_reg);
 
 static int __init omap_gpio_sysinit(void)
 {
 	int ret = 0;
 
-	if (!initialized)
-		ret = _omap_gpio_init();
-
 	mpuio_init();
 
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a5ce4f0aad3..a4f8003de66 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -27,20 +27,20 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c-omap.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <mach/irqs.h>
 #include <plat/mux.h>
 #include <plat/i2c.h>
 #include <plat/omap-pm.h>
+#include <plat/omap_device.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
-#define OMAP2_I2C_BASE1		0x48070000
-#define OMAP2_I2C_BASE2		0x48072000
-#define OMAP2_I2C_BASE3		0x48060000
-#define OMAP4_I2C_BASE4		0x48350000
 
-static const char name[] = "i2c_omap";
+static const char name[] = "omap_i2c";
 
 #define I2C_RESOURCE_BUILDER(base, irq)			\
 	{						\
@@ -55,15 +55,6 @@ static const char name[] = "i2c_omap";
 
 static struct resource i2c_resources[][2] = {
 	{ I2C_RESOURCE_BUILDER(0, 0) },
-#if	defined(CONFIG_ARCH_OMAP2PLUS)
-	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, 0) },
-#endif
-#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, 0) },
-#endif
-#if	defined(CONFIG_ARCH_OMAP4)
-	{ I2C_RESOURCE_BUILDER(OMAP4_I2C_BASE4, 0) },
-#endif
 };
 
 #define I2C_DEV_BUILDER(bus_id, res, data)		\
@@ -77,18 +68,11 @@ static struct resource i2c_resources[][2] = {
 		},					\
 	}
 
-static struct omap_i2c_bus_platform_data i2c_pdata[ARRAY_SIZE(i2c_resources)];
+#define MAX_OMAP_I2C_HWMOD_NAME_LEN	16
+#define OMAP_I2C_MAX_CONTROLLERS 4
+static struct omap_i2c_bus_platform_data i2c_pdata[OMAP_I2C_MAX_CONTROLLERS];
 static struct platform_device omap_i2c_devices[] = {
 	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-#if	defined(CONFIG_ARCH_OMAP2PLUS)
-	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_pdata[1]),
-#endif
-#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_pdata[2]),
-#endif
-#if	defined(CONFIG_ARCH_OMAP4)
-	I2C_DEV_BUILDER(4, i2c_resources[3], &i2c_pdata[3]),
-#endif
 };
 
 #define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
@@ -109,35 +93,25 @@ static int __init omap_i2c_nr_ports(void)
 	return ports;
 }
 
-/* Shared between omap2 and 3 */
-static resource_size_t omap2_i2c_irq[3] __initdata = {
-	INT_24XX_I2C1_IRQ,
-	INT_24XX_I2C2_IRQ,
-	INT_34XX_I2C3_IRQ,
-};
-
-static resource_size_t omap4_i2c_irq[4] __initdata = {
-	OMAP44XX_IRQ_I2C1,
-	OMAP44XX_IRQ_I2C2,
-	OMAP44XX_IRQ_I2C3,
-	OMAP44XX_IRQ_I2C4,
-};
-
-static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id)
+static inline int omap1_i2c_add_bus(int bus_id)
 {
-	struct omap_i2c_bus_platform_data *pd;
+	struct platform_device *pdev;
+	struct omap_i2c_bus_platform_data *pdata;
 	struct resource *res;
 
-	pd = pdev->dev.platform_data;
+	omap1_i2c_mux_pins(bus_id);
+
+	pdev = &omap_i2c_devices[bus_id - 1];
 	res = pdev->resource;
 	res[0].start = OMAP1_I2C_BASE;
 	res[0].end = res[0].start + OMAP_I2C_SIZE;
 	res[1].start = INT_I2C;
-	omap1_i2c_mux_pins(bus_id);
+	pdata = &i2c_pdata[bus_id - 1];
 
 	return platform_device_register(pdev);
 }
 
+
 /*
  * XXX This function is a temporary compatibility wrapper - only
  * needed until the I2C driver can be converted to call
@@ -148,52 +122,64 @@ static void omap_pm_set_max_mpu_wakeup_lat_compat(struct device *dev, long t)
 	omap_pm_set_max_mpu_wakeup_lat(dev, t);
 }
 
-static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
-{
-	struct resource *res;
-	resource_size_t *irq;
+static struct omap_device_pm_latency omap_i2c_latency[] = {
+	[0] = {
+		.deactivate_func	= omap_device_idle_hwmods,
+		.activate_func		= omap_device_enable_hwmods,
+		.flags			= OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+	},
+};
 
-	res = pdev->resource;
+#ifdef CONFIG_ARCH_OMAP2PLUS
+static inline int omap2_i2c_add_bus(int bus_id)
+{
+	int l;
+	struct omap_hwmod *oh;
+	struct omap_device *od;
+	char oh_name[MAX_OMAP_I2C_HWMOD_NAME_LEN];
+	struct omap_i2c_bus_platform_data *pdata;
 
-	if (!cpu_is_omap44xx())
-		irq = omap2_i2c_irq;
-	else
-		irq = omap4_i2c_irq;
+	omap2_i2c_mux_pins(bus_id);
 
-	if (bus_id == 1) {
-		res[0].start = OMAP2_I2C_BASE1;
-		res[0].end = res[0].start + OMAP_I2C_SIZE;
+	l = snprintf(oh_name, MAX_OMAP_I2C_HWMOD_NAME_LEN, "i2c%d", bus_id);
+	WARN(l >= MAX_OMAP_I2C_HWMOD_NAME_LEN,
+		"String buffer overflow in I2C%d device setup\n", bus_id);
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+			pr_err("Could not look up %s\n", oh_name);
+			return -EEXIST;
 	}
 
-	res[1].start = irq[bus_id - 1];
-	omap2_i2c_mux_pins(bus_id);
-
+	pdata = &i2c_pdata[bus_id - 1];
 	/*
 	 * When waiting for completion of a i2c transfer, we need to
 	 * set a wake up latency constraint for the MPU. This is to
 	 * ensure quick enough wakeup from idle, when transfer
 	 * completes.
+	 * Only omap3 has support for constraints
 	 */
-	if (cpu_is_omap34xx()) {
-		struct omap_i2c_bus_platform_data *pd;
-
-		pd = pdev->dev.platform_data;
-		pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
-	}
-
-	return platform_device_register(pdev);
+	if (cpu_is_omap34xx())
+		pdata->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat_compat;
+	od = omap_device_build(name, bus_id, oh, pdata,
+			sizeof(struct omap_i2c_bus_platform_data),
+			omap_i2c_latency, ARRAY_SIZE(omap_i2c_latency), 0);
+	WARN(IS_ERR(od), "Could not build omap_device for %s\n", name);
+
+	return PTR_ERR(od);
 }
+#else
+static inline int omap2_i2c_add_bus(int bus_id)
+{
+	return 0;
+}
+#endif
 
 static int __init omap_i2c_add_bus(int bus_id)
 {
-	struct platform_device *pdev;
-
-	pdev = &omap_i2c_devices[bus_id - 1];
-
 	if (cpu_class_is_omap1())
-		return omap1_i2c_add_bus(pdev, bus_id);
+		return omap1_i2c_add_bus(bus_id);
 	else
-		return omap2_i2c_add_bus(pdev, bus_id);
+		return omap2_i2c_add_bus(bus_id);
 }
 
 /**
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
index bb937f3fabe..256ab3f1ec8 100644
--- a/arch/arm/plat-omap/include/plat/clkdev_omap.h
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -8,7 +8,7 @@
 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
 #define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
 
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 
 struct omap_clk {
 	u16				cpu;
@@ -31,18 +31,18 @@ struct omap_clk {
 #define CK_1510		(1 << 2)
 #define CK_16XX		(1 << 3)	/* 16xx, 17xx, 5912 */
 #define CK_242X		(1 << 4)
-#define CK_243X		(1 << 5)
-#define CK_3XXX		(1 << 6)	/* OMAP3 + AM3 common clocks*/
-#define CK_343X		(1 << 7)	/* OMAP34xx common clocks */
-#define CK_3430ES1	(1 << 8)	/* 34xxES1 only */
-#define CK_3430ES2	(1 << 9)	/* 34xxES2, ES3, non-Sitara 35xx only */
-#define CK_3505		(1 << 10)
-#define CK_3517		(1 << 11)
-#define CK_36XX		(1 << 12)	/* OMAP36xx/37xx-specific clocks */
-#define CK_443X		(1 << 13)
+#define CK_243X		(1 << 5)	/* 243x, 253x */
+#define CK_3430ES1	(1 << 6)	/* 34xxES1 only */
+#define CK_3430ES2PLUS	(1 << 7)	/* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_3505		(1 << 8)
+#define CK_3517		(1 << 9)
+#define CK_36XX		(1 << 10)	/* 36xx/37xx-specific clocks */
+#define CK_443X		(1 << 11)
 
-#define CK_AM35XX	(CK_3505 | CK_3517)	/* all Sitara AM35xx */
 
+#define CK_34XX		(CK_3430ES1 | CK_3430ES2PLUS)
+#define CK_AM35XX	(CK_3505 | CK_3517)	/* all Sitara AM35xx */
+#define CK_3XXX		(CK_34XX | CK_AM35XX | CK_36XX)
 
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index fef4696dcf6..8eb0adab19e 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -49,13 +49,18 @@ struct clkops {
 /* struct clksel_rate.flags possibilities */
 #define RATE_IN_242X		(1 << 0)
 #define RATE_IN_243X		(1 << 1)
-#define RATE_IN_3XXX		(1 << 2)	/* rates common to all OMAP3 */
-#define RATE_IN_3430ES2		(1 << 3)	/* 3430ES2 rates only */
+#define RATE_IN_3430ES1		(1 << 2)	/* 3430ES1 rates only */
+#define RATE_IN_3430ES2PLUS	(1 << 3)	/* 3430 ES >= 2 rates only */
 #define RATE_IN_36XX		(1 << 4)
 #define RATE_IN_4430		(1 << 5)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
-#define RATE_IN_3430ES2PLUS	(RATE_IN_3430ES2 | RATE_IN_36XX)
+#define RATE_IN_34XX		(RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
+#define RATE_IN_3XXX		(RATE_IN_34XX | RATE_IN_36XX)
+
+/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
+#define RATE_IN_3430ES2PLUS_36XX	(RATE_IN_3430ES2PLUS | RATE_IN_36XX)
+
 
 /**
  * struct clksel_rate - register bitfield values corresponding to clk divisors
@@ -119,8 +124,7 @@ struct clksel {
  *
  * Possible values for @flags:
  * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
- * NO_DCO_SEL: don't program DCO (only for some J-type DPLLs)
-
+ *
  * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
  *
  * XXX Some DPLLs have multiple bypass inputs, so it's not technically
@@ -156,6 +160,8 @@ struct dpll_data {
 	u32			autoidle_mask;
 	u32			freqsel_mask;
 	u32			idlest_mask;
+	u32			dco_mask;
+	u32			sddiv_mask;
 	u8			auto_recal_bit;
 	u8			recal_en_bit;
 	u8			recal_st_bit;
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index a9d69a09920..6b8088ec74a 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -27,6 +27,8 @@
 #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
 #define __ARCH_ARM_MACH_OMAP_COMMON_H
 
+#include <linux/delay.h>
+
 #include <plat/i2c.h>
 
 struct sys_timer;
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 0cce4ca83aa..d1c916fcf77 100644
--- a/arch/arm/plat-omap/include/plat/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -21,141 +21,15 @@
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
-/* Move omap4 specific defines to dma-44xx.h */
-#include "dma-44xx.h"
+#include <linux/platform_device.h>
 
-/* Hardware registers for omap1 */
-#define OMAP1_DMA_BASE			(0xfffed800)
-
-#define OMAP1_DMA_GCR			0x400
-#define OMAP1_DMA_GSCR			0x404
-#define OMAP1_DMA_GRST			0x408
-#define OMAP1_DMA_HW_ID			0x442
-#define OMAP1_DMA_PCH2_ID		0x444
-#define OMAP1_DMA_PCH0_ID		0x446
-#define OMAP1_DMA_PCH1_ID		0x448
-#define OMAP1_DMA_PCHG_ID		0x44a
-#define OMAP1_DMA_PCHD_ID		0x44c
-#define OMAP1_DMA_CAPS_0_U		0x44e
-#define OMAP1_DMA_CAPS_0_L		0x450
-#define OMAP1_DMA_CAPS_1_U		0x452
-#define OMAP1_DMA_CAPS_1_L		0x454
-#define OMAP1_DMA_CAPS_2		0x456
-#define OMAP1_DMA_CAPS_3		0x458
-#define OMAP1_DMA_CAPS_4		0x45a
-#define OMAP1_DMA_PCH2_SR		0x460
-#define OMAP1_DMA_PCH0_SR		0x480
-#define OMAP1_DMA_PCH1_SR		0x482
-#define OMAP1_DMA_PCHD_SR		0x4c0
-
-/* Hardware registers for omap2 and omap3 */
-#define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
-#define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
-#define OMAP44XX_DMA4_BASE		(L4_44XX_BASE + 0x56000)
-
-#define OMAP_DMA4_REVISION		0x00
-#define OMAP_DMA4_GCR			0x78
-#define OMAP_DMA4_IRQSTATUS_L0		0x08
-#define OMAP_DMA4_IRQSTATUS_L1		0x0c
-#define OMAP_DMA4_IRQSTATUS_L2		0x10
-#define OMAP_DMA4_IRQSTATUS_L3		0x14
-#define OMAP_DMA4_IRQENABLE_L0		0x18
-#define OMAP_DMA4_IRQENABLE_L1		0x1c
-#define OMAP_DMA4_IRQENABLE_L2		0x20
-#define OMAP_DMA4_IRQENABLE_L3		0x24
-#define OMAP_DMA4_SYSSTATUS		0x28
-#define OMAP_DMA4_OCP_SYSCONFIG		0x2c
-#define OMAP_DMA4_CAPS_0		0x64
-#define OMAP_DMA4_CAPS_2		0x6c
-#define OMAP_DMA4_CAPS_3		0x70
-#define OMAP_DMA4_CAPS_4		0x74
-
-#define OMAP1_LOGICAL_DMA_CH_COUNT	17
-#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
-
-/* Common channel specific registers for omap1 */
-#define OMAP1_DMA_CH_BASE(n)		(0x40 * (n) + 0x00)
-#define OMAP1_DMA_CSDP(n)		(0x40 * (n) + 0x00)
-#define OMAP1_DMA_CCR(n)		(0x40 * (n) + 0x02)
-#define OMAP1_DMA_CICR(n)		(0x40 * (n) + 0x04)
-#define OMAP1_DMA_CSR(n)		(0x40 * (n) + 0x06)
-#define OMAP1_DMA_CEN(n)		(0x40 * (n) + 0x10)
-#define OMAP1_DMA_CFN(n)		(0x40 * (n) + 0x12)
-#define OMAP1_DMA_CSFI(n)		(0x40 * (n) + 0x14)
-#define OMAP1_DMA_CSEI(n)		(0x40 * (n) + 0x16)
-#define OMAP1_DMA_CPC(n)		(0x40 * (n) + 0x18)	/* 15xx only */
-#define OMAP1_DMA_CSAC(n)		(0x40 * (n) + 0x18)
-#define OMAP1_DMA_CDAC(n)		(0x40 * (n) + 0x1a)
-#define OMAP1_DMA_CDEI(n)		(0x40 * (n) + 0x1c)
-#define OMAP1_DMA_CDFI(n)		(0x40 * (n) + 0x1e)
-#define OMAP1_DMA_CLNK_CTRL(n)		(0x40 * (n) + 0x28)
-
-/* Common channel specific registers for omap2 */
-#define OMAP_DMA4_CH_BASE(n)		(0x60 * (n) + 0x80)
-#define OMAP_DMA4_CCR(n)		(0x60 * (n) + 0x80)
-#define OMAP_DMA4_CLNK_CTRL(n)		(0x60 * (n) + 0x84)
-#define OMAP_DMA4_CICR(n)		(0x60 * (n) + 0x88)
-#define OMAP_DMA4_CSR(n)		(0x60 * (n) + 0x8c)
-#define OMAP_DMA4_CSDP(n)		(0x60 * (n) + 0x90)
-#define OMAP_DMA4_CEN(n)		(0x60 * (n) + 0x94)
-#define OMAP_DMA4_CFN(n)		(0x60 * (n) + 0x98)
-#define OMAP_DMA4_CSEI(n)		(0x60 * (n) + 0xa4)
-#define OMAP_DMA4_CSFI(n)		(0x60 * (n) + 0xa8)
-#define OMAP_DMA4_CDEI(n)		(0x60 * (n) + 0xac)
-#define OMAP_DMA4_CDFI(n)		(0x60 * (n) + 0xb0)
-#define OMAP_DMA4_CSAC(n)		(0x60 * (n) + 0xb4)
-#define OMAP_DMA4_CDAC(n)		(0x60 * (n) + 0xb8)
-
-/* Channel specific registers only on omap1 */
-#define OMAP1_DMA_CSSA_L(n)		(0x40 * (n) + 0x08)
-#define OMAP1_DMA_CSSA_U(n)		(0x40 * (n) + 0x0a)
-#define OMAP1_DMA_CDSA_L(n)		(0x40 * (n) + 0x0c)
-#define OMAP1_DMA_CDSA_U(n)		(0x40 * (n) + 0x0e)
-#define OMAP1_DMA_COLOR_L(n)		(0x40 * (n) + 0x20)
-#define OMAP1_DMA_COLOR_U(n)		(0x40 * (n) + 0x22)
-#define OMAP1_DMA_CCR2(n)		(0x40 * (n) + 0x24)
-#define OMAP1_DMA_LCH_CTRL(n)		(0x40 * (n) + 0x2a)	/* not on 15xx */
-#define OMAP1_DMA_CCEN(n)		0
-#define OMAP1_DMA_CCFN(n)		0
-
-/* Channel specific registers only on omap2 */
-#define OMAP_DMA4_CSSA(n)		(0x60 * (n) + 0x9c)
-#define OMAP_DMA4_CDSA(n)		(0x60 * (n) + 0xa0)
-#define OMAP_DMA4_CCEN(n)		(0x60 * (n) + 0xbc)
-#define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
-#define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
-
-/* Additional registers available on OMAP4 */
-#define OMAP_DMA4_CDP(n)		(0x60 * (n) + 0xd0)
-#define OMAP_DMA4_CNDP(n)		(0x60 * (n) + 0xd4)
-#define OMAP_DMA4_CCDN(n)		(0x60 * (n) + 0xd8)
-
-/* Dummy defines to keep multi-omap compiles happy */
-#define OMAP1_DMA_REVISION		0
-#define OMAP1_DMA_IRQSTATUS_L0		0
-#define OMAP1_DMA_IRQENABLE_L0		0
-#define OMAP1_DMA_OCP_SYSCONFIG		0
-#define OMAP_DMA4_HW_ID			0
-#define OMAP_DMA4_CAPS_0_L		0
-#define OMAP_DMA4_CAPS_0_U		0
-#define OMAP_DMA4_CAPS_1_L		0
-#define OMAP_DMA4_CAPS_1_U		0
-#define OMAP_DMA4_GSCR			0
-#define OMAP_DMA4_CPC(n)		0
-
-#define OMAP_DMA4_LCH_CTRL(n)		0
-#define OMAP_DMA4_COLOR_L(n)		0
-#define OMAP_DMA4_COLOR_U(n)		0
-#define OMAP_DMA4_CCR2(n)		0
-#define OMAP1_DMA_CSSA(n)		0
-#define OMAP1_DMA_CDSA(n)		0
-#define OMAP_DMA4_CSSA_L(n)		0
-#define OMAP_DMA4_CSSA_U(n)		0
-#define OMAP_DMA4_CDSA_L(n)		0
-#define OMAP_DMA4_CDSA_U(n)		0
-#define OMAP1_DMA_COLOR(n)		0
+/*
+ * TODO: These dma channel defines should go away once all
+ * the omap drivers hwmod adapted.
+ */
 
-/*----------------------------------------------------------------------------*/
+/* Move omap4 specific defines to dma-44xx.h */
+#include "dma-44xx.h"
 
 /* DMA channels for omap1 */
 #define OMAP_DMA_NO_DEVICE		0
@@ -405,6 +279,63 @@
 #define DMA_CH_PRIO_HIGH		0x1
 #define DMA_CH_PRIO_LOW			0x0 /* Def */
 
+/* Errata handling */
+#define IS_DMA_ERRATA(id)		(errata & (id))
+#define SET_DMA_ERRATA(id)		(errata |= (id))
+
+#define DMA_ERRATA_IFRAME_BUFFERING	BIT(0x0)
+#define DMA_ERRATA_PARALLEL_CHANNELS	BIT(0x1)
+#define DMA_ERRATA_i378			BIT(0x2)
+#define DMA_ERRATA_i541			BIT(0x3)
+#define DMA_ERRATA_i88			BIT(0x4)
+#define DMA_ERRATA_3_3			BIT(0x5)
+#define DMA_ROMCODE_BUG			BIT(0x6)
+
+/* Attributes for OMAP DMA Contrller */
+#define DMA_LINKED_LCH			BIT(0x0)
+#define GLOBAL_PRIORITY			BIT(0x1)
+#define RESERVE_CHANNEL			BIT(0x2)
+#define IS_CSSA_32			BIT(0x3)
+#define IS_CDSA_32			BIT(0x4)
+#define IS_RW_PRIORITY			BIT(0x5)
+#define ENABLE_1510_MODE		BIT(0x6)
+#define SRC_PORT			BIT(0x7)
+#define DST_PORT			BIT(0x8)
+#define SRC_INDEX			BIT(0x9)
+#define DST_INDEX			BIT(0xA)
+#define IS_BURST_ONLY4			BIT(0xB)
+#define CLEAR_CSR_ON_READ		BIT(0xC)
+#define IS_WORD_16			BIT(0xD)
+
+enum omap_reg_offsets {
+
+GCR,		GSCR,		GRST1,		HW_ID,
+PCH2_ID,	PCH0_ID,	PCH1_ID,	PCHG_ID,
+PCHD_ID,	CAPS_0,		CAPS_1,		CAPS_2,
+CAPS_3,		CAPS_4,		PCH2_SR,	PCH0_SR,
+PCH1_SR,	PCHD_SR,	REVISION,	IRQSTATUS_L0,
+IRQSTATUS_L1,	IRQSTATUS_L2,	IRQSTATUS_L3,	IRQENABLE_L0,
+IRQENABLE_L1,	IRQENABLE_L2,	IRQENABLE_L3,	SYSSTATUS,
+OCP_SYSCONFIG,
+
+/* omap1+ specific */
+CPC, CCR2, LCH_CTRL,
+
+/* Common registers for all omap's */
+CSDP,		CCR,		CICR,		CSR,
+CEN,		CFN,		CSFI,		CSEI,
+CSAC,		CDAC,		CDEI,
+CDFI,		CLNK_CTRL,
+
+/* Channel specific registers */
+CSSA,		CDSA,		COLOR,
+CCEN,		CCFN,
+
+/* omap3630 and omap4 specific */
+CDP,		CNDP,		CCDN,
+
+};
+
 enum omap_dma_burst_mode {
 	OMAP_DMA_DATA_BURST_DIS = 0,
 	OMAP_DMA_DATA_BURST_4,
@@ -470,6 +401,41 @@ struct omap_dma_channel_params {
 #endif
 };
 
+struct omap_dma_lch {
+	int next_lch;
+	int dev_id;
+	u16 saved_csr;
+	u16 enabled_irqs;
+	const char *dev_name;
+	void (*callback)(int lch, u16 ch_status, void *data);
+	void *data;
+	long flags;
+	/* required for Dynamic chaining */
+	int prev_linked_ch;
+	int next_linked_ch;
+	int state;
+	int chain_id;
+	int status;
+};
+
+struct omap_dma_dev_attr {
+	u32 dev_caps;
+	u16 lch_count;
+	u16 chan_count;
+	struct omap_dma_lch *chan;
+};
+
+/* System DMA platform data structure */
+struct omap_system_dma_plat_info {
+	struct omap_dma_dev_attr *dma_attr;
+	u32 errata;
+	void (*disable_irq_lch)(int lch);
+	void (*show_dma_caps)(void);
+	void (*clear_lch_regs)(int lch);
+	void (*clear_dma)(int lch);
+	void (*dma_write)(u32 val, int reg, int lch);
+	u32 (*dma_read)(int reg, int lch);
+};
 
 extern void omap_set_dma_priority(int lch, int dst_port, int priority);
 extern int omap_request_dma(int dev_id, const char *dev_name,
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
index f1864a652f7..ae39bcb3f5b 100644
--- a/arch/arm/plat-omap/include/plat/fpga.h
+++ b/arch/arm/plat-omap/include/plat/fpga.h
@@ -19,11 +19,7 @@
 #ifndef __ASM_ARCH_OMAP_FPGA_H
 #define __ASM_ARCH_OMAP_FPGA_H
 
-#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
 extern void omap1510_fpga_init_irq(void);
-#else
-#define omap1510_fpga_init_irq()	(0)
-#endif
 
 #define fpga_read(reg)			__raw_readb(reg)
 #define fpga_write(val, reg)		__raw_writeb(val, reg)
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index de1c604962e..d6f9fa0f62a 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -27,26 +27,15 @@
 #define __ASM_ARCH_OMAP_GPIO_H
 
 #include <linux/io.h>
+#include <linux/platform_device.h>
 #include <mach/irqs.h>
 
 #define OMAP1_MPUIO_BASE			0xfffb5000
 
-#if (defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850))
-
-#define OMAP_MPUIO_INPUT_LATCH		0x00
-#define OMAP_MPUIO_OUTPUT		0x02
-#define OMAP_MPUIO_IO_CNTL		0x04
-#define OMAP_MPUIO_KBR_LATCH		0x08
-#define OMAP_MPUIO_KBC			0x0a
-#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
-#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
-#define OMAP_MPUIO_KBD_INT		0x10
-#define OMAP_MPUIO_GPIO_INT		0x12
-#define OMAP_MPUIO_KBD_MASKIT		0x14
-#define OMAP_MPUIO_GPIO_MASKIT		0x16
-#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
-#define OMAP_MPUIO_LATCH		0x1a
-#else
+/*
+ * These are the omap15xx/16xx offsets. The omap7xx offset are
+ * OMAP_MPUIO_ / 2 offsets below.
+ */
 #define OMAP_MPUIO_INPUT_LATCH		0x00
 #define OMAP_MPUIO_OUTPUT		0x04
 #define OMAP_MPUIO_IO_CNTL		0x08
@@ -60,7 +49,6 @@
 #define OMAP_MPUIO_GPIO_MASKIT		0x2c
 #define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
 #define OMAP_MPUIO_LATCH		0x34
-#endif
 
 #define OMAP34XX_NR_GPIOS		6
 
@@ -71,8 +59,30 @@
 				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
 				 IH_GPIO_BASE + (nr))
 
-extern int omap_gpio_init(void);	/* Call from board init only */
-extern void omap2_gpio_prepare_for_idle(int power_state);
+#define METHOD_MPUIO		0
+#define METHOD_GPIO_1510	1
+#define METHOD_GPIO_1610	2
+#define METHOD_GPIO_7XX		3
+#define METHOD_GPIO_24XX	5
+#define METHOD_GPIO_44XX	6
+
+struct omap_gpio_dev_attr {
+	int bank_width;		/* GPIO bank width */
+	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
+};
+
+struct omap_gpio_platform_data {
+	u16 virtual_irq_start;
+	int bank_type;
+	int bank_width;		/* GPIO bank width */
+	int bank_stride;	/* Only needed for omap1 MPUIO */
+	bool dbck_flag;		/* dbck required or not - True for OMAP3&4 */
+};
+
+/* TODO: Analyze removing gpio_bank_count usage from driver code */
+extern int gpio_bank_count;
+
+extern void omap2_gpio_prepare_for_idle(int off_mode);
 extern void omap2_gpio_resume_after_idle(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 9fd99b9e40a..85ded598853 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -80,12 +80,12 @@
 #define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
 
 /*
- * Note that all values in this struct are in nanoseconds, while
- * the register values are in gpmc_fck cycles.
+ * Note that all values in this struct are in nanoseconds except sync_clk
+ * (which is in picoseconds), while the register values are in gpmc_fck cycles.
  */
 struct gpmc_timings {
-	/* Minimum clock period for synchronous mode */
-	u16 sync_clk;
+	/* Minimum clock period for synchronous mode (in picoseconds) */
+	u32 sync_clk;
 
 	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
 	u16 cs_on;		/* Assertion time */
@@ -117,6 +117,7 @@ struct gpmc_timings {
 };
 
 extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
 extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
 extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
 extern unsigned long gpmc_get_fclk_period(void);
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
index 36a0befd616..878d632c409 100644
--- a/arch/arm/plat-omap/include/plat/i2c.h
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -36,6 +36,19 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
 }
 #endif
 
+/**
+ * i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
+ * @fifo_depth: total controller FIFO size (in bytes)
+ * @flags: differences in hardware support capability
+ *
+ * @fifo_depth represents what exists on the hardware, not what is
+ * actually configured at runtime by the device driver.
+ */
+struct omap_i2c_dev_attr {
+	u8	fifo_depth;
+	u8	flags;
+};
+
 void __init omap1_i2c_mux_pins(int bus_id);
 void __init omap2_i2c_mux_pins(int bus_id);
 
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index 128b549c279..ef4106c1318 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -291,11 +291,12 @@ static inline void omap44xx_map_common_io(void)
 }
 #endif
 
-extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
-				 struct omap_sdrc_params *sdrc_cs1);
+extern void omap2_init_common_infrastructure(void);
+extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+				      struct omap_sdrc_params *sdrc_cs1);
 
-#define __arch_ioremap(p,s,t)	omap_ioremap(p,s,t)
-#define __arch_iounmap(v)	omap_iounmap(v)
+#define __arch_ioremap	omap_ioremap
+#define __arch_iounmap	omap_iounmap
 
 void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
 void omap_iounmap(volatile void __iomem *addr);
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 33c7d41cb6a..69230d68553 100644
--- a/arch/arm/plat-omap/include/plat/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -50,6 +50,8 @@ struct iommu {
 	int (*isr)(struct iommu *obj);
 
 	void *ctx; /* iommu context: registres saved area */
+	u32 da_start;
+	u32 da_end;
 };
 
 struct cr_regs {
@@ -103,6 +105,8 @@ struct iommu_platform_data {
 	const char *name;
 	const char *clk_name;
 	const int nr_tlb_entries;
+	u32 da_start;
+	u32 da_end;
 };
 
 #if defined(CONFIG_ARCH_OMAP1)
@@ -152,6 +156,7 @@ extern void flush_iotlb_all(struct iommu *obj);
 extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
 extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
 
+extern int iommu_set_da_range(struct iommu *obj, u32 start, u32 end);
 extern struct iommu *iommu_get(const char *name);
 extern void iommu_put(struct iommu *obj);
 
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 65e20a68671..2910de921c5 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -77,7 +77,7 @@
 /*
  * OMAP-1610 specific IRQ numbers for interrupt handler 1
  */
-#define INT_1610_IH2_IRQ	0
+#define INT_1610_IH2_IRQ	INT_1510_IH2_IRQ
 #define INT_1610_IH2_FIQ	2
 #define INT_1610_McBSP2_TX	4
 #define INT_1610_McBSP2_RX	5
diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
index 3ae52ccc793..793ce9d5329 100644
--- a/arch/arm/plat-omap/include/plat/keypad.h
+++ b/arch/arm/plat-omap/include/plat/keypad.h
@@ -10,16 +10,18 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
 
-#warning: Please update the board to use matrix_keypad.h instead
+#ifndef CONFIG_ARCH_OMAP1
+#warning Please update the board to use matrix-keypad driver
+#endif
+#include <linux/input/matrix_keypad.h>
 
 struct omap_kp_platform_data {
 	int rows;
 	int cols;
-	int *keymap;
-	unsigned int keymapsize;
-	unsigned int rep:1;
+	const struct matrix_keymap_data *keymap_data;
+	bool rep;
 	unsigned long delay;
-	unsigned int dbounce:1;
+	bool dbounce;
 	/* specific to OMAP242x*/
 	unsigned int *row_gpios;
 	unsigned int *col_gpios;
@@ -28,18 +30,21 @@ struct omap_kp_platform_data {
 /* Group (0..3) -- when multiple keys are pressed, only the
  * keys pressed in the same group are considered as pressed. This is
  * in order to workaround certain crappy HW designs that produce ghost
- * keypresses. */
-#define GROUP_0		(0 << 16)
-#define GROUP_1		(1 << 16)
-#define GROUP_2		(2 << 16)
-#define GROUP_3		(3 << 16)
+ * keypresses. Two free bits, not used by neither row/col nor keynum,
+ * must be available for use as group bits. The below GROUP_SHIFT
+ * macro definition is based on some prior knowledge of the
+ * matrix_keypad defined KEY() macro internals.
+ */
+#define GROUP_SHIFT	14
+#define GROUP_0		(0 << GROUP_SHIFT)
+#define GROUP_1		(1 << GROUP_SHIFT)
+#define GROUP_2		(2 << GROUP_SHIFT)
+#define GROUP_3		(3 << GROUP_SHIFT)
 #define GROUP_MASK	GROUP_3
+#if KEY_MAX & GROUP_MASK
+#error Group bits in conflict with keynum bits
+#endif
 
-#define KEY_PERSISTENT		0x00800000
-#define KEYNUM_MASK		0x00EFFFFF
-#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
-						KEY_PERSISTENT)
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/plat-omap/include/plat/l4_3xxx.h
new file mode 100644
index 00000000000..5e194937542
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l4_3xxx.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+
+/* L4 CORE */
+#define OMAP3_L4_CORE_FW_I2C1_REGION				21
+#define OMAP3_L4_CORE_FW_I2C1_TA_REGION				22
+#define OMAP3_L4_CORE_FW_I2C2_REGION				23
+#define OMAP3_L4_CORE_FW_I2C2_TA_REGION				24
+#define OMAP3_L4_CORE_FW_I2C3_REGION				73
+#define OMAP3_L4_CORE_FW_I2C3_TA_REGION				74
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h
index 99765655210..cc3921e9059 100644
--- a/arch/arm/plat-omap/include/plat/mailbox.h
+++ b/arch/arm/plat-omap/include/plat/mailbox.h
@@ -46,8 +46,8 @@ struct omap_mbox_queue {
 	struct kfifo		fifo;
 	struct work_struct	work;
 	struct tasklet_struct	tasklet;
-	int	(*callback)(void *);
 	struct omap_mbox	*mbox;
+	bool full;
 };
 
 struct omap_mbox {
@@ -57,13 +57,15 @@ struct omap_mbox {
 	struct omap_mbox_ops	*ops;
 	struct device		*dev;
 	void			*priv;
+	int			use_count;
+	struct blocking_notifier_head   notifier;
 };
 
 int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
 void omap_mbox_init_seq(struct omap_mbox *);
 
-struct omap_mbox *omap_mbox_get(const char *);
-void omap_mbox_put(struct omap_mbox *);
+struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb);
+void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb);
 
 int omap_mbox_register(struct device *parent, struct omap_mbox **);
 int omap_mbox_unregister(void);
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
index d5306bee44b..f8d922fb558 100644
--- a/arch/arm/plat-omap/include/plat/memory.h
+++ b/arch/arm/plat-omap/include/plat/memory.h
@@ -61,17 +61,17 @@
 #define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
 #define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
 
-#define __arch_page_to_dma(dev, page)	\
-	({ dma_addr_t __dma = page_to_phys(page); \
+#define __arch_pfn_to_dma(dev, pfn)	\
+	({ dma_addr_t __dma = __pfn_to_phys(pfn); \
 	   if (is_lbus_device(dev)) \
 		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
 	   __dma; })
 
-#define __arch_dma_to_page(dev, addr)	\
+#define __arch_dma_to_pfn(dev, addr)	\
 	({ dma_addr_t __dma = addr;				\
 	   if (is_lbus_device(dev))				\
 		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
-	   phys_to_page(__dma);					\
+	   __phys_to_pfn(__dma);				\
 	})
 
 #define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 728fbb9dd54..c0a75205303 100644
--- a/arch/arm/plat-omap/include/plat/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -17,26 +17,7 @@
 #include <linux/device.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
-
-#include "powerdomain.h"
-
-/**
- * struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU
- * @rate: target clock rate
- * @opp_id: OPP ID
- * @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP
- *
- * Operating performance point data.  Can vary by OMAP chip and board.
- */
-struct omap_opp {
-	unsigned long rate;
-	u8 opp_id;
-	u16 min_vdd;
-};
-
-extern struct omap_opp *mpu_opps;
-extern struct omap_opp *dsp_opps;
-extern struct omap_opp *l3_opps;
+#include <linux/opp.h>
 
 /*
  * agent_id values for use with omap_pm_set_min_bus_tput():
@@ -59,9 +40,11 @@ extern struct omap_opp *l3_opps;
  * framework starts.  The "_if_" is to avoid name collisions with the
  * PM idle-loop code.
  */
-int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
-				 struct omap_opp *dsp_opp_table,
-				 struct omap_opp *l3_opp_table);
+#ifdef CONFIG_OMAP_PM_NONE
+#define omap_pm_if_early_init() 0
+#else
+int __init omap_pm_if_early_init(void);
+#endif
 
 /**
  * omap_pm_if_init - OMAP PM init code called after clock fw init
@@ -69,7 +52,11 @@ int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
  * The main initialization code.  OPP tables are passed in here.  The
  * "_if_" is to avoid name collisions with the PM idle-loop code.
  */
+#ifdef CONFIG_OMAP_PM_NONE
+#define omap_pm_if_init() 0
+#else
 int __init omap_pm_if_init(void);
+#endif
 
 /**
  * omap_pm_if_exit - OMAP PM exit code
@@ -363,9 +350,11 @@ unsigned long omap_pm_cpu_get_freq(void);
  * driver must restore device context.   If the number of context losses
  * exceeds the maximum positive integer, the function will wrap to 0 and
  * continue counting.  Returns the number of context losses for this device,
- * or -EINVAL upon error.
+ * or zero upon error.
  */
-int omap_pm_get_dev_context_loss_count(struct device *dev);
+u32 omap_pm_get_dev_context_loss_count(struct device *dev);
 
+void omap_pm_enable_off_mode(void);
+void omap_pm_disable_off_mode(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index c8dae02f070..2682043f5a5 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -22,7 +22,7 @@
 
 #include <plat/mux.h>
 
-#define DRIVER_NAME	"omap-hsuart"
+#define DRIVER_NAME	"omap_uart"
 
 /*
  * Use tty device name as ttyO, [O -> OMAP]
@@ -31,20 +31,8 @@
  */
 #define OMAP_SERIAL_NAME	"ttyO"
 
-#define OMAP_MDR1_DISABLE	0x07
-#define OMAP_MDR1_MODE13X	0x03
-#define OMAP_MDR1_MODE16X	0x00
 #define OMAP_MODE13X_SPEED	230400
 
-/*
- * LCR = 0XBF: Switch to Configuration Mode B.
- * In configuration mode b allow access
- * to EFR,DLL,DLH.
- * Reference OMAP TRM Chapter 17
- * Section: 1.4.3 Mode Selection
- */
-#define OMAP_UART_LCR_CONF_MDB	0XBF
-
 /* WER = 0x7F
  * Enable module level wakeup in WER reg
  */
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index 8b3f12ff5cb..ea2b8a6306e 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -52,5 +52,10 @@
 #define OMAP4_MMU1_BASE			0x55082000
 #define OMAP4_MMU2_BASE			0x4A066000
 
+#define OMAP44XX_USBTLL_BASE		(L4_44XX_BASE + 0x62000)
+#define OMAP44XX_UHH_CONFIG_BASE	(L4_44XX_BASE + 0x64000)
+#define OMAP44XX_HSUSB_OHCI_BASE	(L4_44XX_BASE + 0x64800)
+#define OMAP44XX_HSUSB_EHCI_BASE	(L4_44XX_BASE + 0x64C00)
+
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index 28e2d1a7843..e4c349ff9fd 100644
--- a/arch/arm/plat-omap/include/plat/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -107,6 +107,7 @@ void __iomem *omap_device_get_rt_va(struct omap_device *od);
 int omap_device_align_pm_lat(struct platform_device *pdev,
 			     u32 new_wakeup_lat_limit);
 struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+u32 omap_device_get_context_loss_count(struct platform_device *pdev);
 
 /* Other */
 
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 7eaa8edf3b1..6864a997f2c 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -23,7 +23,7 @@
  * - add pinmuxing
  * - init_conn_id_bit (CONNID_BIT_VECTOR)
  * - implement default hwmod SMS/SDRC flags?
- * - remove unused fields
+ * - move Linux-specific data ("non-ROM data") out
  *
  */
 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
@@ -32,8 +32,9 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
-#include <linux/mutex.h>
+#include <linux/spinlock.h>
 #include <plat/cpu.h>
+#include <plat/voltage.h>
 
 struct omap_device;
 
@@ -76,6 +77,20 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
 #define HWMOD_IDLEMODE_FORCE		(1 << 0)
 #define HWMOD_IDLEMODE_NO		(1 << 1)
 #define HWMOD_IDLEMODE_SMART		(1 << 2)
+/* Slave idle mode flag only */
+#define HWMOD_IDLEMODE_SMART_WKUP	(1 << 3)
+
+/**
+ * struct omap_hwmod_mux_info - hwmod specific mux configuration
+ * @pads:              array of omap_device_pad entries
+ * @nr_pads:           number of omap_device_pad entries
+ *
+ * Note that this is currently built during init as needed.
+ */
+struct omap_hwmod_mux_info {
+	int				nr_pads;
+	struct omap_device_pad		*pads;
+};
 
 /**
  * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
@@ -159,7 +174,7 @@ struct omap_hwmod_omap2_firewall {
  * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
  * ADDR_TYPE_RT: Address space contains module register target data.
  */
-#define ADDR_MAP_ON_INIT	(1 << 0)
+#define ADDR_MAP_ON_INIT	(1 << 0)	/* XXX does not belong */
 #define ADDR_TYPE_RT		(1 << 1)
 
 /**
@@ -200,8 +215,6 @@ struct omap_hwmod_addr_space {
  * @fw: interface firewall data
  * @addr_cnt: ARRAY_SIZE(@addr)
  * @width: OCP data width
- * @thread_cnt: number of threads
- * @max_burst_len: maximum burst length in @width sized words (0 if unlimited)
  * @user: initiators using this interface (see OCP_USER_* macros above)
  * @flags: OCP interface flags (see OCPIF_* macros above)
  *
@@ -221,8 +234,6 @@ struct omap_hwmod_ocp_if {
 	}				fw;
 	u8				addr_cnt;
 	u8				width;
-	u8				thread_cnt;
-	u8				max_burst_len;
 	u8				user;
 	u8				flags;
 };
@@ -231,11 +242,12 @@ struct omap_hwmod_ocp_if {
 /* Macros for use in struct omap_hwmod_sysconfig */
 
 /* Flags for use in omap_hwmod_sysconfig.idlemodes */
-#define MASTER_STANDBY_SHIFT	2
+#define MASTER_STANDBY_SHIFT	4
 #define SLAVE_IDLE_SHIFT	0
 #define SIDLE_FORCE		(HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
 #define SIDLE_NO		(HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
 #define SIDLE_SMART		(HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART_WKUP	(HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
 #define MSTANDBY_FORCE		(HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
 #define MSTANDBY_NO		(HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
 #define MSTANDBY_SMART		(HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
@@ -357,14 +369,14 @@ struct omap_hwmod_omap4_prcm {
  * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
  *     of standby, rather than relying on module smart-standby
  * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
- *     SDRAM controller, etc.
+ *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
  * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
- *     controller, etc.
+ *     controller, etc. XXX probably belongs outside the main hwmod file
  * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
  *     when module is enabled, rather than the default, which is to
  *     enable autoidle
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
- * HWMOD_NO_IDLEST : this module does not have idle status - this is the case
+ * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
  *     only for few initiator modules on OMAP2 & 3.
  * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
  *     This is needed for devices like DSS that require optional clocks enabled
@@ -415,14 +427,31 @@ struct omap_hwmod_omap4_prcm {
  * @name: name of the hwmod_class
  * @sysc: device SYSCONFIG/SYSSTATUS register data
  * @rev: revision of the IP class
+ * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
+ * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
  *
  * Represent the class of a OMAP hardware "modules" (e.g. timer,
  * smartreflex, gpio, uart...)
+ *
+ * @pre_shutdown is a function that will be run immediately before
+ * hwmod clocks are disabled, etc.  It is intended for use for hwmods
+ * like the MPU watchdog, which cannot be disabled with the standard
+ * omap_hwmod_shutdown().  The function should return 0 upon success,
+ * or some negative error upon failure.  Returning an error will cause
+ * omap_hwmod_shutdown() to abort the device shutdown and return an
+ * error.
+ *
+ * If @reset is defined, then the function it points to will be
+ * executed in place of the standard hwmod _reset() code in
+ * mach-omap2/omap_hwmod.c.  This is needed for IP blocks which have
+ * unusual reset sequences - usually processor IP blocks like the IVA.
  */
 struct omap_hwmod_class {
 	const char				*name;
 	struct omap_hwmod_class_sysconfig	*sysc;
 	u32					rev;
+	int					(*pre_shutdown)(struct omap_hwmod *oh);
+	int					(*reset)(struct omap_hwmod *oh);
 };
 
 /**
@@ -436,14 +465,14 @@ struct omap_hwmod_class {
  * @main_clk: main clock: OMAP clock name
  * @_clk: pointer to the main struct clk (filled in at runtime)
  * @opt_clks: other device clocks that drivers can request (0..*)
+ * @vdd_name: voltage domain name
+ * @voltdm: pointer to voltage domain (filled in at runtime)
  * @masters: ptr to array of OCP ifs that this hwmod can initiate on
  * @slaves: ptr to array of OCP ifs that this hwmod can respond on
  * @dev_attr: arbitrary device attributes that can be passed to the driver
  * @_sysc_cache: internal-use hwmod flags
  * @_mpu_rt_va: cached register target start address (internal use)
  * @_mpu_port_index: cached MPU register target slave ID (internal use)
- * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
- * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
  * @mpu_irqs_cnt: number of @mpu_irqs
  * @sdma_reqs_cnt: number of @sdma_reqs
  * @opt_clks_cnt: number of @opt_clks
@@ -452,9 +481,10 @@ struct omap_hwmod_class {
  * @response_lat: device OCP response latency (in interface clock cycles)
  * @_int_flags: internal-use hwmod flags
  * @_state: internal-use hwmod state
+ * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
  * @flags: hwmod flags (documented below)
  * @omap_chip: OMAP chips this hwmod is present on
- * @_mutex: mutex serializing operations on this hwmod
+ * @_lock: spinlock serializing operations on this hwmod
  * @node: list node for hwmod list (internal use)
  *
  * @main_clk refers to this module's "main clock," which for our
@@ -469,6 +499,7 @@ struct omap_hwmod {
 	const char			*name;
 	struct omap_hwmod_class		*class;
 	struct omap_device		*od;
+	struct omap_hwmod_mux_info	*mux;
 	struct omap_hwmod_irq_info	*mpu_irqs;
 	struct omap_hwmod_dma_info	*sdma_reqs;
 	struct omap_hwmod_rst_info	*rst_lines;
@@ -479,17 +510,17 @@ struct omap_hwmod {
 	const char			*main_clk;
 	struct clk			*_clk;
 	struct omap_hwmod_opt_clk	*opt_clks;
+	char				*vdd_name;
+	struct voltagedomain		*voltdm;
 	struct omap_hwmod_ocp_if	**masters; /* connect to *_IA */
 	struct omap_hwmod_ocp_if	**slaves;  /* connect to *_TA */
 	void				*dev_attr;
 	u32				_sysc_cache;
 	void __iomem			*_mpu_rt_va;
-	struct mutex			_mutex;
+	spinlock_t			_lock;
 	struct list_head		node;
 	u16				flags;
 	u8				_mpu_port_index;
-	u8				msuspendmux_reg_id;
-	u8				msuspendmux_shift;
 	u8				response_lat;
 	u8				mpu_irqs_cnt;
 	u8				sdma_reqs_cnt;
@@ -500,16 +531,15 @@ struct omap_hwmod {
 	u8				hwmods_cnt;
 	u8				_int_flags;
 	u8				_state;
+	u8				_postsetup_state;
 	const struct omap_chip_id	omap_chip;
 };
 
 int omap_hwmod_init(struct omap_hwmod **ohs);
-int omap_hwmod_register(struct omap_hwmod *oh);
-int omap_hwmod_unregister(struct omap_hwmod *oh);
 struct omap_hwmod *omap_hwmod_lookup(const char *name);
 int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
 			void *data);
-int omap_hwmod_late_init(u8 skip_setup_idle);
+int omap_hwmod_late_init(void);
 
 int omap_hwmod_enable(struct omap_hwmod *oh);
 int _omap_hwmod_enable(struct omap_hwmod *oh);
@@ -556,6 +586,9 @@ int omap_hwmod_for_each_by_class(const char *classname,
 					   void *user),
 				 void *user);
 
+int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
+u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
+
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index ab77442e42a..2fdf8c80d39 100644
--- a/arch/arm/plat-omap/include/plat/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -18,6 +18,10 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * XXX This file is deprecated.  The PRCM is an OMAP2+-only subsystem,
+ * so this file doesn't belong in plat-omap/include/plat.  Please
+ * do not add anything new to this file.
  */
 
 #ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
@@ -28,22 +32,6 @@ void omap_prcm_arch_reset(char mode, const char *cmd);
 int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
 			 const char *name);
 
-#define START_PADCONF_SAVE 0x2
-#define PADCONF_SAVE_DONE  0x1
-
-void omap3_prcm_save_context(void);
-void omap3_prcm_restore_context(void);
-
-u32 prm_read_mod_reg(s16 module, u16 idx);
-void prm_write_mod_reg(u32 val, s16 module, u16 idx);
-u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
-u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
-u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
-u32 cm_read_mod_reg(s16 module, u16 idx);
-void cm_write_mod_reg(u32 val, s16 module, u16 idx);
-u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
-
 #endif
 
 
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 19145f5c32b..cec5d56db2e 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -93,9 +93,12 @@
 			})
 
 #ifndef __ASSEMBLER__
+
+struct omap_board_data;
+
 extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
-extern void omap_serial_init_port(int port);
+extern void omap_serial_init_port(struct omap_board_data *bdata);
 extern int omap_uart_can_sleep(void);
 extern void omap_uart_check_wakeup(void);
 extern void omap_uart_prepare_suspend(void);
diff --git a/arch/arm/plat-omap/include/plat/smartreflex.h b/arch/arm/plat-omap/include/plat/smartreflex.h
new file mode 100644
index 00000000000..6568c885f37
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/smartreflex.h
@@ -0,0 +1,245 @@
+/*
+ * OMAP Smartreflex Defines and Routines
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Lesly A M <x0080970@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
+#define __ASM_ARM_OMAP_SMARTREFLEX_H
+
+#include <linux/platform_device.h>
+#include <plat/voltage.h>
+
+/*
+ * Different Smartreflex IPs version. The v1 is the 65nm version used in
+ * OMAP3430. The v2 is the update for the 45nm version of the IP
+ * used in OMAP3630 and OMAP4430
+ */
+#define SR_TYPE_V1	1
+#define SR_TYPE_V2	2
+
+/* SMART REFLEX REG ADDRESS OFFSET */
+#define SRCONFIG		0x00
+#define SRSTATUS		0x04
+#define SENVAL			0x08
+#define SENMIN			0x0C
+#define SENMAX			0x10
+#define SENAVG			0x14
+#define AVGWEIGHT		0x18
+#define NVALUERECIPROCAL	0x1c
+#define SENERROR_V1		0x20
+#define ERRCONFIG_V1		0x24
+#define IRQ_EOI			0x20
+#define IRQSTATUS_RAW		0x24
+#define IRQSTATUS		0x28
+#define IRQENABLE_SET		0x2C
+#define IRQENABLE_CLR		0x30
+#define SENERROR_V2		0x34
+#define ERRCONFIG_V2		0x38
+
+/* Bit/Shift Positions */
+
+/* SRCONFIG */
+#define SRCONFIG_ACCUMDATA_SHIFT	22
+#define SRCONFIG_SRCLKLENGTH_SHIFT	12
+#define SRCONFIG_SENNENABLE_V1_SHIFT	5
+#define SRCONFIG_SENPENABLE_V1_SHIFT	3
+#define SRCONFIG_SENNENABLE_V2_SHIFT	1
+#define SRCONFIG_SENPENABLE_V2_SHIFT	0
+#define SRCONFIG_CLKCTRL_SHIFT		0
+
+#define SRCONFIG_ACCUMDATA_MASK		(0x3ff << 22)
+
+#define SRCONFIG_SRENABLE		BIT(11)
+#define SRCONFIG_SENENABLE		BIT(10)
+#define SRCONFIG_ERRGEN_EN		BIT(9)
+#define SRCONFIG_MINMAXAVG_EN		BIT(8)
+#define SRCONFIG_DELAYCTRL		BIT(2)
+
+/* AVGWEIGHT */
+#define AVGWEIGHT_SENPAVGWEIGHT_SHIFT	2
+#define AVGWEIGHT_SENNAVGWEIGHT_SHIFT	0
+
+/* NVALUERECIPROCAL */
+#define NVALUERECIPROCAL_SENPGAIN_SHIFT	20
+#define NVALUERECIPROCAL_SENNGAIN_SHIFT	16
+#define NVALUERECIPROCAL_RNSENP_SHIFT	8
+#define NVALUERECIPROCAL_RNSENN_SHIFT	0
+
+/* ERRCONFIG */
+#define ERRCONFIG_ERRWEIGHT_SHIFT	16
+#define ERRCONFIG_ERRMAXLIMIT_SHIFT	8
+#define ERRCONFIG_ERRMINLIMIT_SHIFT	0
+
+#define SR_ERRWEIGHT_MASK		(0x07 << 16)
+#define SR_ERRMAXLIMIT_MASK		(0xff << 8)
+#define SR_ERRMINLIMIT_MASK		(0xff << 0)
+
+#define ERRCONFIG_VPBOUNDINTEN_V1	BIT(31)
+#define ERRCONFIG_VPBOUNDINTST_V1	BIT(30)
+#define	ERRCONFIG_MCUACCUMINTEN		BIT(29)
+#define ERRCONFIG_MCUACCUMINTST		BIT(28)
+#define	ERRCONFIG_MCUVALIDINTEN		BIT(27)
+#define ERRCONFIG_MCUVALIDINTST		BIT(26)
+#define ERRCONFIG_MCUBOUNDINTEN		BIT(25)
+#define	ERRCONFIG_MCUBOUNDINTST		BIT(24)
+#define	ERRCONFIG_MCUDISACKINTEN	BIT(23)
+#define ERRCONFIG_VPBOUNDINTST_V2	BIT(23)
+#define ERRCONFIG_MCUDISACKINTST	BIT(22)
+#define ERRCONFIG_VPBOUNDINTEN_V2	BIT(22)
+
+#define ERRCONFIG_STATUS_V1_MASK	(ERRCONFIG_VPBOUNDINTST_V1 | \
+					ERRCONFIG_MCUACCUMINTST | \
+					ERRCONFIG_MCUVALIDINTST | \
+					ERRCONFIG_MCUBOUNDINTST | \
+					ERRCONFIG_MCUDISACKINTST)
+/* IRQSTATUS */
+#define IRQSTATUS_MCUACCUMINT		BIT(3)
+#define IRQSTATUS_MCVALIDINT		BIT(2)
+#define IRQSTATUS_MCBOUNDSINT		BIT(1)
+#define IRQSTATUS_MCUDISABLEACKINT	BIT(0)
+
+/* IRQENABLE_SET and IRQENABLE_CLEAR */
+#define IRQENABLE_MCUACCUMINT		BIT(3)
+#define IRQENABLE_MCUVALIDINT		BIT(2)
+#define IRQENABLE_MCUBOUNDSINT		BIT(1)
+#define IRQENABLE_MCUDISABLEACKINT	BIT(0)
+
+/* Common Bit values */
+
+#define SRCLKLENGTH_12MHZ_SYSCLK	0x3c
+#define SRCLKLENGTH_13MHZ_SYSCLK	0x41
+#define SRCLKLENGTH_19MHZ_SYSCLK	0x60
+#define SRCLKLENGTH_26MHZ_SYSCLK	0x82
+#define SRCLKLENGTH_38MHZ_SYSCLK	0xC0
+
+/*
+ * 3430 specific values. Maybe these should be passed from board file or
+ * pmic structures.
+ */
+#define OMAP3430_SR_ACCUMDATA		0x1f4
+
+#define OMAP3430_SR1_SENPAVGWEIGHT	0x03
+#define OMAP3430_SR1_SENNAVGWEIGHT	0x03
+
+#define OMAP3430_SR2_SENPAVGWEIGHT	0x01
+#define OMAP3430_SR2_SENNAVGWEIGHT	0x01
+
+#define OMAP3430_SR_ERRWEIGHT		0x04
+#define OMAP3430_SR_ERRMAXLIMIT		0x02
+
+/**
+ * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
+ *				pmic specific info to smartreflex driver
+ *
+ * @sr_pmic_init:	API to initialize smartreflex on the PMIC side.
+ */
+struct omap_sr_pmic_data {
+	void (*sr_pmic_init) (void);
+};
+
+#ifdef CONFIG_OMAP_SMARTREFLEX
+/*
+ * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
+ * The smartreflex class driver should pass the class type.
+ * Should be used to populate the class_type field of the
+ * omap_smartreflex_class_data structure.
+ */
+#define SR_CLASS1	0x1
+#define SR_CLASS2	0x2
+#define SR_CLASS3	0x3
+
+/**
+ * struct omap_sr_class_data - Smartreflex class driver info
+ *
+ * @enable:		API to enable a particular class smaartreflex.
+ * @disable:		API to disable a particular class smartreflex.
+ * @configure:		API to configure a particular class smartreflex.
+ * @notify:		API to notify the class driver about an event in SR.
+ *			Not needed for class3.
+ * @notify_flags:	specify the events to be notified to the class driver
+ * @class_type:		specify which smartreflex class.
+ *			Can be used by the SR driver to take any class
+ *			based decisions.
+ */
+struct omap_sr_class_data {
+	int (*enable)(struct voltagedomain *voltdm);
+	int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
+	int (*configure)(struct voltagedomain *voltdm);
+	int (*notify)(struct voltagedomain *voltdm, u32 status);
+	u8 notify_flags;
+	u8 class_type;
+};
+
+/**
+ * struct omap_sr_nvalue_table	- Smartreflex n-target value info
+ *
+ * @efuse_offs:	The offset of the efuse where n-target values are stored.
+ * @nvalue:	The n-target value.
+ */
+struct omap_sr_nvalue_table {
+	u32 efuse_offs;
+	u32 nvalue;
+};
+
+/**
+ * struct omap_sr_data - Smartreflex platform data.
+ *
+ * @ip_type:		Smartreflex IP type.
+ * @senp_mod:		SENPENABLE value for the sr
+ * @senn_mod:		SENNENABLE value for sr
+ * @nvalue_count:	Number of distinct nvalues in the nvalue table
+ * @enable_on_init:	whether this sr module needs to enabled at
+ *			boot up or not.
+ * @nvalue_table:	table containing the  efuse offsets and nvalues
+ *			corresponding to them.
+ * @voltdm:		Pointer to the voltage domain associated with the SR
+ */
+struct omap_sr_data {
+	int				ip_type;
+	u32				senp_mod;
+	u32				senn_mod;
+	int				nvalue_count;
+	bool				enable_on_init;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+};
+
+/* Smartreflex module enable/disable interface */
+void omap_sr_enable(struct voltagedomain *voltdm);
+void omap_sr_disable(struct voltagedomain *voltdm);
+void omap_sr_disable_reset_volt(struct voltagedomain *voltdm);
+
+/* API to register the pmic specific data with the smartreflex driver. */
+void omap_sr_register_pmic(struct omap_sr_pmic_data *pmic_data);
+
+/* Smartreflex driver hooks to be called from Smartreflex class driver */
+int sr_enable(struct voltagedomain *voltdm, unsigned long volt);
+void sr_disable(struct voltagedomain *voltdm);
+int sr_configure_errgen(struct voltagedomain *voltdm);
+int sr_configure_minmax(struct voltagedomain *voltdm);
+
+/* API to register the smartreflex class driver with the smartreflex driver */
+int sr_register_class(struct omap_sr_class_data *class_data);
+#else
+static inline void omap_sr_enable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable(struct voltagedomain *voltdm) {}
+static inline void omap_sr_disable_reset_volt(
+		struct voltagedomain *voltdm) {}
+static inline void omap_sr_register_pmic(
+		struct omap_sr_pmic_data *pmic_data) {}
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index ecd6a488c49..7a10257909e 100644
--- a/arch/arm/plat-omap/include/plat/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -18,7 +18,6 @@
 #define OMAP_ARCH_SMP_H
 
 #include <asm/hardware/gic.h>
-#include <asm/smp_mpidr.h>
 
 /* Needed for secondary core boot */
 extern void omap_secondary_startup(void);
@@ -29,9 +28,9 @@ extern u32 omap_read_auxcoreboot0(void);
 /*
  * We use Soft IRQ1 as the IPI
  */
-static inline void smp_cross_call(const struct cpumask *mask)
+static inline void smp_cross_call(const struct cpumask *mask, int ipi)
 {
-	gic_raise_softirq(mask, 1);
+	gic_raise_softirq(mask, ipi);
 }
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 5905100b29a..9967d5e855c 100644
--- a/arch/arm/plat-omap/include/plat/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -11,6 +11,7 @@
 #ifndef __ARCH_ARM_OMAP_SRAM_H
 #define __ARCH_ARM_OMAP_SRAM_H
 
+#ifndef __ASSEMBLY__
 extern void * omap_sram_push(void * start, unsigned long size);
 extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
 
@@ -74,4 +75,14 @@ extern void omap_push_sram_idle(void);
 static inline void omap_push_sram_idle(void) {}
 #endif /* CONFIG_PM */
 
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA		0x40200000
+#define OMAP3_SRAM_PA           0x40200000
+#define OMAP4_SRAM_PA		0x40300000
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 9036e374e0a..ad98b85cae2 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -145,8 +145,11 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		/* omap3 based boards using UART3 */
 		DEBUG_LL_OMAP3(3, cm_t35);
 		DEBUG_LL_OMAP3(3, cm_t3517);
+		DEBUG_LL_OMAP3(3, craneboard);
+		DEBUG_LL_OMAP3(3, devkit8000);
 		DEBUG_LL_OMAP3(3, igep0020);
 		DEBUG_LL_OMAP3(3, igep0030);
+		DEBUG_LL_OMAP3(3, nokia_rm680);
 		DEBUG_LL_OMAP3(3, nokia_rx51);
 		DEBUG_LL_OMAP3(3, omap3517evm);
 		DEBUG_LL_OMAP3(3, omap3_beagle);
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 59c7fe731f2..450a332f100 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -11,6 +11,7 @@ enum ehci_hcd_omap_mode {
 	EHCI_HCD_OMAP_MODE_UNKNOWN,
 	EHCI_HCD_OMAP_MODE_PHY,
 	EHCI_HCD_OMAP_MODE_TLL,
+	EHCI_HCD_OMAP_MODE_HSIC,
 };
 
 enum ohci_omap3_port_mode {
@@ -69,6 +70,10 @@ struct omap_musb_board_data {
 	u8	mode;
 	u16	power;
 	unsigned extvbus:1;
+	void	(*set_phy_power)(u8 on);
+	void	(*clear_irq)(void);
+	void	(*set_mode)(u8 mode);
+	void	(*reset)(void);
 };
 
 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
@@ -79,6 +84,11 @@ extern void usb_ehci_init(const struct ehci_hcd_omap_platform_data *pdata);
 
 extern void usb_ohci_init(const struct ohci_hcd_omap_platform_data *pdata);
 
+extern int omap4430_phy_power(struct device *dev, int ID, int on);
+extern int omap4430_phy_set_clk(struct device *dev, int on);
+extern int omap4430_phy_init(struct device *dev);
+extern int omap4430_phy_exit(struct device *dev);
+
 #endif
 
 
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
new file mode 100644
index 00000000000..0ff123399f3
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -0,0 +1,146 @@
+/*
+ * OMAP Voltage Management Routines
+ *
+ * Author: Thara Gopinath	<thara@ti.com>
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
+#define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
+
+#define VOLTSCALE_VPFORCEUPDATE		1
+#define VOLTSCALE_VCBYPASS		2
+
+/*
+ * OMAP3 GENERIC setup times. Revisit to see if these needs to be
+ * passed from board or PMIC file
+ */
+#define OMAP3_CLKSETUP		0xff
+#define OMAP3_VOLTOFFSET	0xff
+#define OMAP3_VOLTSETUP2	0xff
+
+/* Voltage value defines */
+#define OMAP3430_VDD_MPU_OPP1_UV		975000
+#define OMAP3430_VDD_MPU_OPP2_UV		1075000
+#define OMAP3430_VDD_MPU_OPP3_UV		1200000
+#define OMAP3430_VDD_MPU_OPP4_UV		1270000
+#define OMAP3430_VDD_MPU_OPP5_UV		1350000
+
+#define OMAP3430_VDD_CORE_OPP1_UV		975000
+#define OMAP3430_VDD_CORE_OPP2_UV		1050000
+#define OMAP3430_VDD_CORE_OPP3_UV		1150000
+
+#define OMAP3630_VDD_MPU_OPP50_UV		1012500
+#define OMAP3630_VDD_MPU_OPP100_UV		1200000
+#define OMAP3630_VDD_MPU_OPP120_UV		1325000
+#define OMAP3630_VDD_MPU_OPP1G_UV		1375000
+
+#define OMAP3630_VDD_CORE_OPP50_UV		1000000
+#define OMAP3630_VDD_CORE_OPP100_UV		1200000
+
+#define OMAP4430_VDD_MPU_OPP50_UV		930000
+#define OMAP4430_VDD_MPU_OPP100_UV		1100000
+#define OMAP4430_VDD_MPU_OPPTURBO_UV		1260000
+#define OMAP4430_VDD_MPU_OPPNITRO_UV		1350000
+
+#define OMAP4430_VDD_IVA_OPP50_UV		930000
+#define OMAP4430_VDD_IVA_OPP100_UV		1100000
+#define OMAP4430_VDD_IVA_OPPTURBO_UV		1260000
+
+#define OMAP4430_VDD_CORE_OPP50_UV		930000
+#define OMAP4430_VDD_CORE_OPP100_UV		1100000
+
+/**
+ * struct voltagedomain - omap voltage domain global structure.
+ * @name:	Name of the voltage domain which can be used as a unique
+ *		identifier.
+ */
+struct voltagedomain {
+	char *name;
+};
+
+/* API to get the voltagedomain pointer */
+struct voltagedomain *omap_voltage_domain_lookup(char *name);
+
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal:	The possible voltage value in uV
+ * @sr_efuse_offs:	The offset of the efuse register(from system
+ *			control module base address) from where to read
+ *			the n-target value for the smartreflex module.
+ * @sr_errminlimit:	Error min limit value for smartreflex. This value
+ *			differs at differnet opp and thus is linked
+ *			with voltage.
+ * @vp_errorgain:	Error gain value for the voltage processor. This
+ *			field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+	u32	volt_nominal;
+	u32	sr_efuse_offs;
+	u8	sr_errminlimit;
+	u8	vp_errgain;
+};
+
+/**
+ * struct omap_volt_pmic_info - PMIC specific data required by voltage driver.
+ * @slew_rate:	PMIC slew rate (in uv/us)
+ * @step_size:	PMIC voltage step size (in uv)
+ * @vsel_to_uv:	PMIC API to convert vsel value to actual voltage in uV.
+ * @uv_to_vsel:	PMIC API to convert voltage in uV to vsel value.
+ */
+struct omap_volt_pmic_info {
+	int slew_rate;
+	int step_size;
+	u32 on_volt;
+	u32 onlp_volt;
+	u32 ret_volt;
+	u32 off_volt;
+	u16 volt_setup_time;
+	u8 vp_erroroffset;
+	u8 vp_vstepmin;
+	u8 vp_vstepmax;
+	u8 vp_vddmin;
+	u8 vp_vddmax;
+	u8 vp_timeout_us;
+	u8 i2c_slave_addr;
+	u8 pmic_reg;
+	unsigned long (*vsel_to_uv) (const u8 vsel);
+	u8 (*uv_to_vsel) (unsigned long uV);
+};
+
+unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm);
+void omap_vp_enable(struct voltagedomain *voltdm);
+void omap_vp_disable(struct voltagedomain *voltdm);
+int omap_voltage_scale_vdd(struct voltagedomain *voltdm,
+		unsigned long target_volt);
+void omap_voltage_reset(struct voltagedomain *voltdm);
+void omap_voltage_get_volttable(struct voltagedomain *voltdm,
+		struct omap_volt_data **volt_data);
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+		unsigned long volt);
+unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
+struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
+#ifdef CONFIG_PM
+int omap_voltage_register_pmic(struct voltagedomain *voltdm,
+		struct omap_volt_pmic_info *pmic_info);
+void omap_change_voltscale_method(struct voltagedomain *voltdm,
+		int voltscale_method);
+int omap_voltage_late_init(void);
+#else
+static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm,
+		struct omap_volt_pmic_info *pmic_info) {}
+static inline  void omap_change_voltscale_method(struct voltagedomain *voltdm,
+		int voltscale_method) {}
+static inline int omap_voltage_late_init(void)
+{
+	return -EINVAL;
+}
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index b0078cf9628..f1295fafcd3 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -136,61 +136,3 @@ void omap_iounmap(volatile void __iomem *addr)
 		__iounmap(addr);
 }
 EXPORT_SYMBOL(omap_iounmap);
-
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-
-u8 omap_readb(u32 pa)
-{
-	if (cpu_class_is_omap1())
-		return __raw_readb(OMAP1_IO_ADDRESS(pa));
-	else
-		return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readb);
-
-u16 omap_readw(u32 pa)
-{
-	if (cpu_class_is_omap1())
-		return __raw_readw(OMAP1_IO_ADDRESS(pa));
-	else
-		return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readw);
-
-u32 omap_readl(u32 pa)
-{
-	if (cpu_class_is_omap1())
-		return __raw_readl(OMAP1_IO_ADDRESS(pa));
-	else
-		return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readl);
-
-void omap_writeb(u8 v, u32 pa)
-{
-	if (cpu_class_is_omap1())
-		__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
-	else
-		__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writeb);
-
-void omap_writew(u16 v, u32 pa)
-{
-	if (cpu_class_is_omap1())
-		__raw_writew(v, OMAP1_IO_ADDRESS(pa));
-	else
-		__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writew);
-
-void omap_writel(u32 v, u32 pa)
-{
-	if (cpu_class_is_omap1())
-		__raw_writel(v, OMAP1_IO_ADDRESS(pa));
-	else
-		__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 6cd151b31bc..b1107c08da5 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -830,6 +830,28 @@ static int device_match_by_alias(struct device *dev, void *data)
 }
 
 /**
+ * iommu_set_da_range - Set a valid device address range
+ * @obj:		target iommu
+ * @start		Start of valid range
+ * @end			End of valid range
+ **/
+int iommu_set_da_range(struct iommu *obj, u32 start, u32 end)
+{
+
+	if (!obj)
+		return -EFAULT;
+
+	if (end < start || !PAGE_ALIGN(start | end))
+		return -EINVAL;
+
+	obj->da_start = start;
+	obj->da_end = end;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(iommu_set_da_range);
+
+/**
  * iommu_get - Get iommu handler
  * @name:	target iommu name
  **/
@@ -922,6 +944,8 @@ static int __devinit omap_iommu_probe(struct platform_device *pdev)
 	obj->name = pdata->name;
 	obj->dev = &pdev->dev;
 	obj->ctx = (void *)obj + sizeof(*obj);
+	obj->da_start = pdata->da_start;
+	obj->da_end = pdata->da_end;
 
 	mutex_init(&obj->iommu_lock);
 	mutex_init(&obj->mmap_lock);
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 8ce0de247c7..6dc1296c8c7 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -87,35 +87,43 @@ static size_t sgtable_len(const struct sg_table *sgt)
 }
 #define sgtable_ok(x)	(!!sgtable_len(x))
 
+static unsigned max_alignment(u32 addr)
+{
+	int i;
+	unsigned pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+	for (i = 0; i < ARRAY_SIZE(pagesize) && addr & (pagesize[i] - 1); i++)
+		;
+	return (i < ARRAY_SIZE(pagesize)) ? pagesize[i] : 0;
+}
+
 /*
  * calculate the optimal number sg elements from total bytes based on
  * iommu superpages
  */
-static unsigned int sgtable_nents(size_t bytes)
+static unsigned sgtable_nents(size_t bytes, u32 da, u32 pa)
 {
-	int i;
-	unsigned int nr_entries;
-	const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+	unsigned nr_entries = 0, ent_sz;
 
 	if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
 		pr_err("%s: wrong size %08x\n", __func__, bytes);
 		return 0;
 	}
 
-	nr_entries = 0;
-	for (i = 0; i < ARRAY_SIZE(pagesize); i++) {
-		if (bytes >= pagesize[i]) {
-			nr_entries += (bytes / pagesize[i]);
-			bytes %= pagesize[i];
-		}
+	while (bytes) {
+		ent_sz = max_alignment(da | pa);
+		ent_sz = min_t(unsigned, ent_sz, iopgsz_max(bytes));
+		nr_entries++;
+		da += ent_sz;
+		pa += ent_sz;
+		bytes -= ent_sz;
 	}
-	BUG_ON(bytes);
 
 	return nr_entries;
 }
 
 /* allocate and initialize sg_table header(a kind of 'superblock') */
-static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
+static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags,
+							u32 da, u32 pa)
 {
 	unsigned int nr_entries;
 	int err;
@@ -127,9 +135,8 @@ static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
 	if (!IS_ALIGNED(bytes, PAGE_SIZE))
 		return ERR_PTR(-EINVAL);
 
-	/* FIXME: IOVMF_DA_FIXED should support 'superpages' */
-	if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) {
-		nr_entries = sgtable_nents(bytes);
+	if (flags & IOVMF_LINEAR) {
+		nr_entries = sgtable_nents(bytes, da, pa);
 		if (!nr_entries)
 			return ERR_PTR(-EINVAL);
 	} else
@@ -273,13 +280,14 @@ static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
 	alignement = PAGE_SIZE;
 
 	if (flags & IOVMF_DA_ANON) {
-		/*
-		 * Reserve the first page for NULL
-		 */
-		start = PAGE_SIZE;
+		start = obj->da_start;
+
 		if (flags & IOVMF_LINEAR)
 			alignement = iopgsz_max(bytes);
 		start = roundup(start, alignement);
+	} else if (start < obj->da_start || start > obj->da_end ||
+					obj->da_end - start < bytes) {
+		return ERR_PTR(-EINVAL);
 	}
 
 	tmp = NULL;
@@ -289,19 +297,19 @@ static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
 	prev_end = 0;
 	list_for_each_entry(tmp, &obj->mmap, list) {
 
-		if (prev_end >= start)
+		if (prev_end > start)
 			break;
 
-		if (start + bytes < tmp->da_start)
+		if (tmp->da_start > start && (tmp->da_start - start) >= bytes)
 			goto found;
 
-		if (flags & IOVMF_DA_ANON)
+		if (tmp->da_end >= start && flags & IOVMF_DA_ANON)
 			start = roundup(tmp->da_end + 1, alignement);
 
 		prev_end = tmp->da_end;
 	}
 
-	if ((start > prev_end) && (ULONG_MAX - start >= bytes))
+	if ((start >= prev_end) && (obj->da_end - start >= bytes))
 		goto found;
 
 	dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
@@ -409,7 +417,8 @@ static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
 	BUG_ON(!sgt);
 }
 
-static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
+static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da,
+								size_t len)
 {
 	unsigned int i;
 	struct scatterlist *sg;
@@ -418,9 +427,10 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
 	va = phys_to_virt(pa);
 
 	for_each_sg(sgt->sgl, sg, sgt->nents, i) {
-		size_t bytes;
+		unsigned bytes;
 
-		bytes = iopgsz_max(len);
+		bytes = max_alignment(da | pa);
+		bytes = min_t(unsigned, bytes, iopgsz_max(len));
 
 		BUG_ON(!iopgsz_ok(bytes));
 
@@ -429,6 +439,7 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
 		 * 'pa' is cotinuous(linear).
 		 */
 		pa += bytes;
+		da += bytes;
 		len -= bytes;
 	}
 	BUG_ON(len);
@@ -695,18 +706,18 @@ u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
 	if (!va)
 		return -ENOMEM;
 
-	sgt = sgtable_alloc(bytes, flags);
+	flags &= IOVMF_HW_MASK;
+	flags |= IOVMF_DISCONT;
+	flags |= IOVMF_ALLOC;
+	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+	sgt = sgtable_alloc(bytes, flags, da, 0);
 	if (IS_ERR(sgt)) {
 		da = PTR_ERR(sgt);
 		goto err_sgt_alloc;
 	}
 	sgtable_fill_vmalloc(sgt, va);
 
-	flags &= IOVMF_HW_MASK;
-	flags |= IOVMF_DISCONT;
-	flags |= IOVMF_ALLOC;
-	flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
-
 	da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
 	if (IS_ERR_VALUE(da))
 		goto err_iommu_vmap;
@@ -746,11 +757,11 @@ static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
 {
 	struct sg_table *sgt;
 
-	sgt = sgtable_alloc(bytes, flags);
+	sgt = sgtable_alloc(bytes, flags, da, pa);
 	if (IS_ERR(sgt))
 		return PTR_ERR(sgt);
 
-	sgtable_fill_kmalloc(sgt, pa, bytes);
+	sgtable_fill_kmalloc(sgt, pa, da, bytes);
 
 	da = map_iommu_region(obj, da, sgt, va, bytes, flags);
 	if (IS_ERR_VALUE(da)) {
@@ -811,7 +822,7 @@ void iommu_kunmap(struct iommu *obj, u32 da)
 	struct sg_table *sgt;
 	typedef void (*func_t)(const void *);
 
-	sgt = unmap_vm_area(obj, da, (func_t)__iounmap,
+	sgt = unmap_vm_area(obj, da, (func_t)iounmap,
 			    IOVMF_LINEAR | IOVMF_MMIO);
 	if (!sgt)
 		dev_dbg(obj->dev, "%s: No sgt\n", __func__);
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index d2fafb892f7..459b319a9fa 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -28,12 +28,12 @@
 #include <linux/slab.h>
 #include <linux/kfifo.h>
 #include <linux/err.h>
+#include <linux/notifier.h>
 
 #include <plat/mailbox.h>
 
 static struct workqueue_struct *mboxd;
 static struct omap_mbox **mboxes;
-static bool rq_full;
 
 static int mbox_configured;
 static DEFINE_MUTEX(mbox_configured_lock);
@@ -93,20 +93,25 @@ int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 	struct omap_mbox_queue *mq = mbox->txq;
 	int ret = 0, len;
 
-	spin_lock(&mq->lock);
+	spin_lock_bh(&mq->lock);
 
 	if (kfifo_avail(&mq->fifo) < sizeof(msg)) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
+	if (kfifo_is_empty(&mq->fifo) && !__mbox_poll_for_space(mbox)) {
+		mbox_fifo_write(mbox, msg);
+		goto out;
+	}
+
 	len = kfifo_in(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
 	WARN_ON(len != sizeof(msg));
 
 	tasklet_schedule(&mbox->txq->tasklet);
 
 out:
-	spin_unlock(&mq->lock);
+	spin_unlock_bh(&mq->lock);
 	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_msg_send);
@@ -146,8 +151,14 @@ static void mbox_rx_work(struct work_struct *work)
 		len = kfifo_out(&mq->fifo, (unsigned char *)&msg, sizeof(msg));
 		WARN_ON(len != sizeof(msg));
 
-		if (mq->callback)
-			mq->callback((void *)msg);
+		blocking_notifier_call_chain(&mq->mbox->notifier, len,
+								(void *)msg);
+		spin_lock_irq(&mq->lock);
+		if (mq->full) {
+			mq->full = false;
+			omap_mbox_enable_irq(mq->mbox, IRQ_RX);
+		}
+		spin_unlock_irq(&mq->lock);
 	}
 }
 
@@ -170,7 +181,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 	while (!mbox_fifo_empty(mbox)) {
 		if (unlikely(kfifo_avail(&mq->fifo) < sizeof(msg))) {
 			omap_mbox_disable_irq(mbox, IRQ_RX);
-			rq_full = true;
+			mq->full = true;
 			goto nomem;
 		}
 
@@ -239,73 +250,77 @@ static int omap_mbox_startup(struct omap_mbox *mbox)
 	int ret = 0;
 	struct omap_mbox_queue *mq;
 
-	if (mbox->ops->startup) {
-		mutex_lock(&mbox_configured_lock);
-		if (!mbox_configured)
+	mutex_lock(&mbox_configured_lock);
+	if (!mbox_configured++) {
+		if (likely(mbox->ops->startup)) {
 			ret = mbox->ops->startup(mbox);
-
-		if (ret) {
-			mutex_unlock(&mbox_configured_lock);
-			return ret;
-		}
-		mbox_configured++;
-		mutex_unlock(&mbox_configured_lock);
-	}
-
-	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
-				mbox->name, mbox);
-	if (ret) {
-		printk(KERN_ERR
-			"failed to register mailbox interrupt:%d\n", ret);
-		goto fail_request_irq;
+			if (unlikely(ret))
+				goto fail_startup;
+		} else
+			goto fail_startup;
 	}
 
-	mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet);
-	if (!mq) {
-		ret = -ENOMEM;
-		goto fail_alloc_txq;
-	}
-	mbox->txq = mq;
+	if (!mbox->use_count++) {
+		ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
+							mbox->name, mbox);
+		if (unlikely(ret)) {
+			pr_err("failed to register mailbox interrupt:%d\n",
+									ret);
+			goto fail_request_irq;
+		}
+		mq = mbox_queue_alloc(mbox, NULL, mbox_tx_tasklet);
+		if (!mq) {
+			ret = -ENOMEM;
+			goto fail_alloc_txq;
+		}
+		mbox->txq = mq;
 
-	mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL);
-	if (!mq) {
-		ret = -ENOMEM;
-		goto fail_alloc_rxq;
+		mq = mbox_queue_alloc(mbox, mbox_rx_work, NULL);
+		if (!mq) {
+			ret = -ENOMEM;
+			goto fail_alloc_rxq;
+		}
+		mbox->rxq = mq;
+		mq->mbox = mbox;
 	}
-	mbox->rxq = mq;
-
+	mutex_unlock(&mbox_configured_lock);
 	return 0;
 
- fail_alloc_rxq:
+fail_alloc_rxq:
 	mbox_queue_free(mbox->txq);
- fail_alloc_txq:
+fail_alloc_txq:
 	free_irq(mbox->irq, mbox);
- fail_request_irq:
+fail_request_irq:
 	if (mbox->ops->shutdown)
 		mbox->ops->shutdown(mbox);
-
+	mbox->use_count--;
+fail_startup:
+	mbox_configured--;
+	mutex_unlock(&mbox_configured_lock);
 	return ret;
 }
 
 static void omap_mbox_fini(struct omap_mbox *mbox)
 {
-	free_irq(mbox->irq, mbox);
-	tasklet_kill(&mbox->txq->tasklet);
-	flush_work(&mbox->rxq->work);
-	mbox_queue_free(mbox->txq);
-	mbox_queue_free(mbox->rxq);
+	mutex_lock(&mbox_configured_lock);
+
+	if (!--mbox->use_count) {
+		free_irq(mbox->irq, mbox);
+		tasklet_kill(&mbox->txq->tasklet);
+		flush_work(&mbox->rxq->work);
+		mbox_queue_free(mbox->txq);
+		mbox_queue_free(mbox->rxq);
+	}
 
-	if (mbox->ops->shutdown) {
-		mutex_lock(&mbox_configured_lock);
-		if (mbox_configured > 0)
-			mbox_configured--;
-		if (!mbox_configured)
+	if (likely(mbox->ops->shutdown)) {
+		if (!--mbox_configured)
 			mbox->ops->shutdown(mbox);
-		mutex_unlock(&mbox_configured_lock);
 	}
+
+	mutex_unlock(&mbox_configured_lock);
 }
 
-struct omap_mbox *omap_mbox_get(const char *name)
+struct omap_mbox *omap_mbox_get(const char *name, struct notifier_block *nb)
 {
 	struct omap_mbox *mbox;
 	int ret;
@@ -324,12 +339,16 @@ struct omap_mbox *omap_mbox_get(const char *name)
 	if (ret)
 		return ERR_PTR(-ENODEV);
 
+	if (nb)
+		blocking_notifier_chain_register(&mbox->notifier, nb);
+
 	return mbox;
 }
 EXPORT_SYMBOL(omap_mbox_get);
 
-void omap_mbox_put(struct omap_mbox *mbox)
+void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb)
 {
+	blocking_notifier_chain_unregister(&mbox->notifier, nb);
 	omap_mbox_fini(mbox);
 }
 EXPORT_SYMBOL(omap_mbox_put);
@@ -353,6 +372,8 @@ int omap_mbox_register(struct device *parent, struct omap_mbox **list)
 			ret = PTR_ERR(mbox->dev);
 			goto err_out;
 		}
+
+		BLOCKING_INIT_NOTIFIER_HEAD(&mbox->notifier);
 	}
 	return 0;
 
@@ -391,7 +412,8 @@ static int __init omap_mbox_init(void)
 
 	/* kfifo size sanity check: alignment and minimal size */
 	mbox_kfifo_size = ALIGN(mbox_kfifo_size, sizeof(mbox_msg_t));
-	mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size, sizeof(mbox_msg_t));
+	mbox_kfifo_size = max_t(unsigned int, mbox_kfifo_size,
+							sizeof(mbox_msg_t));
 
 	return 0;
 }
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index eac4b978e9f..b5a6e178a7f 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -28,6 +28,8 @@
 #include <plat/dma.h>
 #include <plat/mcbsp.h>
 
+/* XXX These "sideways" includes are a sign that something is wrong */
+#include "../mach-omap2/cm2xxx_3xxx.h"
 #include "../mach-omap2/cm-regbits-34xx.h"
 
 struct omap_mcbsp **mcbsp_ptr;
@@ -234,9 +236,9 @@ static void omap_st_on(struct omap_mcbsp *mcbsp)
 	 * Sidetone uses McBSP ICLK - which must not idle when sidetones
 	 * are enabled or sidetones start sounding ugly.
 	 */
-	w = cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+	w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
 	w &= ~(1 << (mcbsp->id - 2));
-	cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+	omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
 
 	/* Enable McBSP Sidetone */
 	w = MCBSP_READ(mcbsp, SSELCR);
@@ -263,9 +265,9 @@ static void omap_st_off(struct omap_mcbsp *mcbsp)
 	w = MCBSP_READ(mcbsp, SSELCR);
 	MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
 
-	w = cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+	w = omap2_cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
 	w |= 1 << (mcbsp->id - 2);
-	cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+	omap2_cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
 }
 
 static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
@@ -755,7 +757,7 @@ int omap_mcbsp_request(unsigned int id)
 		goto err_kfree;
 	}
 
-	mcbsp->free = 0;
+	mcbsp->free = false;
 	mcbsp->reg_cache = reg_cache;
 	spin_unlock(&mcbsp->lock);
 
@@ -815,7 +817,7 @@ err_clk_disable:
 	clk_disable(mcbsp->iclk);
 
 	spin_lock(&mcbsp->lock);
-	mcbsp->free = 1;
+	mcbsp->free = true;
 	mcbsp->reg_cache = NULL;
 err_kfree:
 	spin_unlock(&mcbsp->lock);
@@ -858,7 +860,7 @@ void omap_mcbsp_free(unsigned int id)
 	if (mcbsp->free)
 		dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id);
 	else
-		mcbsp->free = 1;
+		mcbsp->free = true;
 	mcbsp->reg_cache = NULL;
 	spin_unlock(&mcbsp->lock);
 
@@ -1771,7 +1773,7 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
 
 	spin_lock_init(&mcbsp->lock);
 	mcbsp->id = id + 1;
-	mcbsp->free = 1;
+	mcbsp->free = true;
 	mcbsp->dma_tx_lch = -1;
 	mcbsp->dma_rx_lch = -1;
 
@@ -1836,17 +1838,11 @@ static int __devexit omap_mcbsp_remove(struct platform_device *pdev)
 
 		omap34xx_device_exit(mcbsp);
 
-		clk_disable(mcbsp->fclk);
-		clk_disable(mcbsp->iclk);
 		clk_put(mcbsp->fclk);
 		clk_put(mcbsp->iclk);
 
 		iounmap(mcbsp->io_base);
-
-		mcbsp->fclk = NULL;
-		mcbsp->iclk = NULL;
-		mcbsp->free = 0;
-		mcbsp->dev = NULL;
+		kfree(mcbsp);
 	}
 
 	return 0;
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index e129ce80c53..b0471bb2d47 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -20,15 +20,14 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 #include <linux/device.h>
+#include <linux/platform_device.h>
 
 /* Interface documentation is in mach/omap-pm.h */
 #include <plat/omap-pm.h>
+#include <plat/omap_device.h>
 
-#include <plat/powerdomain.h>
-
-struct omap_opp *dsp_opps;
-struct omap_opp *mpu_opps;
-struct omap_opp *l3_opps;
+static bool off_mode_enabled;
+static u32 dummy_context_loss_counter;
 
 /*
  * Device-driver-originated constraints (via board-*.c files)
@@ -284,37 +283,70 @@ unsigned long omap_pm_cpu_get_freq(void)
 	return 0;
 }
 
+/**
+ * omap_pm_enable_off_mode - notify OMAP PM that off-mode is enabled
+ *
+ * Intended for use only by OMAP PM core code to notify this layer
+ * that off mode has been enabled.
+ */
+void omap_pm_enable_off_mode(void)
+{
+	off_mode_enabled = true;
+}
+
+/**
+ * omap_pm_disable_off_mode - notify OMAP PM that off-mode is disabled
+ *
+ * Intended for use only by OMAP PM core code to notify this layer
+ * that off mode has been disabled.
+ */
+void omap_pm_disable_off_mode(void)
+{
+	off_mode_enabled = false;
+}
+
 /*
  * Device context loss tracking
  */
 
-int omap_pm_get_dev_context_loss_count(struct device *dev)
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+u32 omap_pm_get_dev_context_loss_count(struct device *dev)
 {
-	if (!dev) {
-		WARN_ON(1);
-		return -EINVAL;
-	};
+	struct platform_device *pdev = to_platform_device(dev);
+	u32 count;
+
+	if (WARN_ON(!dev))
+		return 0;
+
+	if (dev->parent == &omap_device_parent) {
+		count = omap_device_get_context_loss_count(pdev);
+	} else {
+		WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device",
+			  dev_name(dev));
+		if (off_mode_enabled)
+			dummy_context_loss_counter++;
+		count = dummy_context_loss_counter;
+	}
 
-	pr_debug("OMAP PM: returning context loss count for dev %s\n",
-		 dev_name(dev));
+	pr_debug("OMAP PM: context loss count for dev %s = %d\n",
+		 dev_name(dev), count);
 
-	/*
-	 * Map the device to the powerdomain.  Return the powerdomain
-	 * off counter.
-	 */
+	return count;
+}
 
-	return 0;
+#else
+
+u32 omap_pm_get_dev_context_loss_count(struct device *dev)
+{
+	return dummy_context_loss_counter;
 }
 
+#endif
 
 /* Should be called before clk framework init */
-int __init omap_pm_if_early_init(struct omap_opp *mpu_opp_table,
-				 struct omap_opp *dsp_opp_table,
-				 struct omap_opp *l3_opp_table)
+int __init omap_pm_if_early_init(void)
 {
-	mpu_opps = mpu_opp_table;
-	dsp_opps = dsp_opp_table;
-	l3_opps = l3_opp_table;
 	return 0;
 }
 
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index abe933cd8f0..57adb270767 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -280,6 +280,34 @@ static void _add_optional_clock_alias(struct omap_device *od,
 /* Public functions for use by core code */
 
 /**
+ * omap_device_get_context_loss_count - get lost context count
+ * @od: struct omap_device *
+ *
+ * Using the primary hwmod, query the context loss count for this
+ * device.
+ *
+ * Callers should consider context for this device lost any time this
+ * function returns a value different than the value the caller got
+ * the last time it called this function.
+ *
+ * If any hwmods exist for the omap_device assoiated with @pdev,
+ * return the context loss counter for that hwmod, otherwise return
+ * zero.
+ */
+u32 omap_device_get_context_loss_count(struct platform_device *pdev)
+{
+	struct omap_device *od;
+	u32 ret = 0;
+
+	od = _find_by_pdev(pdev);
+
+	if (od->hwmods_cnt)
+		ret = omap_hwmod_get_context_loss_count(od->hwmods[0]);
+
+	return ret;
+}
+
+/**
  * omap_device_count_resources - count number of struct resource entries needed
  * @od: struct omap_device *
  *
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index e2c8eebe6b3..e26e50487d6 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -33,23 +33,21 @@
 
 #include "sram.h"
 #include "fb.h"
+
+/* XXX These "sideways" includes are a sign that something is wrong */
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-# include "../mach-omap2/prm.h"
-# include "../mach-omap2/cm.h"
+# include "../mach-omap2/prm2xxx_3xxx.h"
 # include "../mach-omap2/sdrc.h"
 #endif
 
 #define OMAP1_SRAM_PA		0x20000000
 #define OMAP1_SRAM_VA		VMALLOC_END
-#define OMAP2_SRAM_PA		0x40200000
-#define OMAP2_SRAM_PUB_PA	0x4020f800
+#define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
 #define OMAP2_SRAM_VA		0xfe400000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_PA           0x40200000
 #define OMAP3_SRAM_VA           0xfe400000
-#define OMAP3_SRAM_PUB_PA       0x40208000
+#define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
 #define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_PA		0x40300000
 #define OMAP4_SRAM_VA		0xfe400000
 #define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
 #define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
@@ -166,7 +164,7 @@ static void __init omap_detect_sram(void)
 		     cpu_is_omap1710())
 			omap_sram_size = 0x4000;	/* 16K */
 		else if (cpu_is_omap1611())
-			omap_sram_size = 0x3e800;	/* 250K */
+			omap_sram_size = SZ_256K;
 		else {
 			printk(KERN_ERR "Could not detect SRAM size\n");
 			omap_sram_size = 0x4000;
@@ -270,7 +268,7 @@ void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
 	_omap_sram_reprogram_clock(dpllctl, ckctl);
 }
 
-int __init omap1_sram_init(void)
+static int __init omap1_sram_init(void)
 {
 	_omap_sram_reprogram_clock =
 			omap_sram_push(omap1_sram_reprogram_clock,
diff --git a/arch/arm/plat-orion/include/plat/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h
index 3ebfef72b4e..cc99163e73f 100644
--- a/arch/arm/plat-orion/include/plat/pcie.h
+++ b/arch/arm/plat-orion/include/plat/pcie.h
@@ -11,12 +11,15 @@
 #ifndef __PLAT_PCIE_H
 #define __PLAT_PCIE_H
 
+struct pci_bus;
+
 u32 orion_pcie_dev_id(void __iomem *base);
 u32 orion_pcie_rev(void __iomem *base);
 int orion_pcie_link_up(void __iomem *base);
 int orion_pcie_x4_mode(void __iomem *base);
 int orion_pcie_get_local_bus_nr(void __iomem *base);
 void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_reset(void __iomem *base);
 void orion_pcie_setup(void __iomem *base,
 		      struct mbus_dram_target_info *dram);
 int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index 779553a1595..af2d733c50b 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -182,11 +182,6 @@ void __init orion_pcie_setup(void __iomem *base,
 	u32 mask;
 
 	/*
-	 * soft reset PCIe unit
-	 */
-	orion_pcie_reset(base);
-
-	/*
 	 * Point PCIe unit MBUS decode windows to DRAM space.
 	 */
 	orion_pcie_setup_wins(base, dram);
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 715a30177f2..c3da2478b2a 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -13,11 +13,11 @@
 
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/cnt32_to_63.h>
 #include <linux/timer.h>
 #include <linux/clockchips.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <asm/sched_clock.h>
 #include <asm/mach/time.h>
 #include <mach/bridge-regs.h>
 #include <mach/hardware.h>
@@ -44,52 +44,26 @@ static u32 ticks_per_jiffy;
 
 /*
  * Orion's sched_clock implementation. It has a resolution of
- * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days.
- *
- * Because the hardware timer period is quite short (21 secs if
- * 200MHz TCLK) and because cnt32_to_63() needs to be called at
- * least once per half period to work properly, a kernel timer is
- * set up to ensure this requirement is always met.
+ * at least 7.5ns (133MHz TCLK).
  */
-#define TCLK2NS_SCALE_FACTOR 8
-
-static unsigned long tclk2ns_scale;
+static DEFINE_CLOCK_DATA(cd);
 
-unsigned long long sched_clock(void)
+unsigned long long notrace sched_clock(void)
 {
-	unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL));
-	return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR;
+	u32 cyc = 0xffffffff - readl(TIMER0_VAL);
+	return cyc_to_sched_clock(&cd, cyc, (u32)~0);
 }
 
-static struct timer_list cnt32_to_63_keepwarm_timer;
 
-static void cnt32_to_63_keepwarm(unsigned long data)
+static void notrace orion_update_sched_clock(void)
 {
-	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
-	(void) sched_clock();
+	u32 cyc = 0xffffffff - readl(TIMER0_VAL);
+	update_sched_clock(&cd, cyc, (u32)~0);
 }
 
 static void __init setup_sched_clock(unsigned long tclk)
 {
-	unsigned long long v;
-	unsigned long data;
-
-	v = NSEC_PER_SEC;
-	v <<= TCLK2NS_SCALE_FACTOR;
-	v += tclk/2;
-	do_div(v, tclk);
-	/*
-	 * We want an even value to automatically clear the top bit
-	 * returned by cnt32_to_63() without an additional run time
-	 * instruction. So if the LSB is 1 then round it up.
-	 */
-	if (v & 1)
-		v++;
-	tclk2ns_scale = v;
-
-	data = (0xffffffffUL / tclk / 2 - 2) * HZ;
-	setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data);
-	mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+	init_sched_clock(&cd, orion_update_sched_clock, 32, tclk);
 }
 
 /*
@@ -102,7 +76,6 @@ static cycle_t orion_clksrc_read(struct clocksource *cs)
 
 static struct clocksource orion_clksrc = {
 	.name		= "orion_clocksource",
-	.shift		= 20,
 	.rating		= 300,
 	.read		= orion_clksrc_read,
 	.mask		= CLOCKSOURCE_MASK(32),
@@ -245,8 +218,7 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk)
 	writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK);
 	u = readl(TIMER_CTRL);
 	writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL);
-	orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift);
-	clocksource_register(&orion_clksrc);
+	clocksource_register_hz(&orion_clksrc, tclk);
 
 	/*
 	 * Setup clockevent timer (interrupt-driven.)
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 4aacdd12c9c..3aca5ba0f87 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -6,6 +6,7 @@ obj-y	:= dma.o
 
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
+obj-$(CONFIG_PXA95x)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
 
 obj-$(CONFIG_HAVE_PWM)		+= pwm.o
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 9e604c80618..75f65647124 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -423,7 +423,7 @@ typedef unsigned long mfp_cfg_t;
 	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
 	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
 
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP)
 /*
  * each MFP pin will have a MFPR register, since the offset of the
  * register varies between processors, the processor specific code
@@ -470,6 +470,6 @@ void mfp_write(int mfp, unsigned long mfpr_val);
 void mfp_config(unsigned long *mfp_cfgs, int num);
 void mfp_config_run(void);
 void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */
 
 #endif /* __ASM_PLAT_MFP_H */
diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h
index e49c5b6fc4e..1ab332e37d7 100644
--- a/arch/arm/plat-pxa/include/plat/sdhci.h
+++ b/arch/arm/plat-pxa/include/plat/sdhci.h
@@ -17,6 +17,9 @@
 /* Require clock free running */
 #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0)
 
+/* Board design supports 8-bit data on SD/SDIO BUS */
+#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2)
+
 /*
  * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI
  * @max_speed: the maximum speed supported
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index c6357e554ab..58b79809d20 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -28,11 +28,11 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <plat/ssp.h>
 
 static DEFINE_MUTEX(ssp_lock);
 static LIST_HEAD(ssp_list);
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5a27b1b538f..eb105e61c74 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -8,7 +8,7 @@ config PLAT_S3C24XX
 	default y
 	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
-	select S3C_DEVICE_NAND
+	select S3C_DEV_NAND
 	select S3C_GPIO_CFG_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 76d0858c3cb..4a10c0f684b 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -88,7 +88,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= 0x32440000,
 		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
+		.map_io		= s3c2440_map_io,
 		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
@@ -97,7 +97,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= 0x32440001,
 		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
+		.map_io		= s3c2440_map_io,
 		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
@@ -106,7 +106,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= 0x32440aaa,
 		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
+		.map_io		= s3c2442_map_io,
 		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
@@ -115,7 +115,7 @@ static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= 0x32440aab,
 		.idmask		= 0xffffffff,
-		.map_io		= s3c244x_map_io,
+		.map_io		= s3c2442_map_io,
 		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 24c6f5a3059..243b6411050 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -82,8 +82,6 @@ static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = {
 struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
 	.set_config	= s3c_gpio_setcfg_s3c24xx,
 	.get_config	= s3c_gpio_getcfg_s3c24xx,
-	.set_pull	= s3c_gpio_setpull_1up,
-	.get_pull	= s3c_gpio_getpull_1up,
 };
 
 struct s3c_gpio_chip s3c24xx_gpios[] = {
diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
index 307248d1ccb..89e8d0a25f8 100644
--- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
+++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h
@@ -21,17 +21,22 @@ extern void s3c244x_init_clocks(int xtal);
 #else
 #define s3c244x_init_clocks NULL
 #define s3c244x_init_uarts NULL
-#define s3c244x_map_io NULL
 #endif
 
 #ifdef CONFIG_CPU_S3C2440
 extern  int s3c2440_init(void);
+
+extern void s3c2440_map_io(void);
 #else
 #define s3c2440_init NULL
+#define s3c2440_map_io NULL
 #endif
 
 #ifdef CONFIG_CPU_S3C2442
 extern  int s3c2442_init(void);
+
+extern void s3c2442_map_io(void);
 #else
 #define s3c2442_init NULL
+#define s3c2442_map_io NULL
 #endif
diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
index 9793544a6ac..704175b0573 100644
--- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
+++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c
@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
index db9e9e477ec..72457afd625 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c
@@ -31,8 +31,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi,
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
index 8ea663a438b..c3972b645d1 100644
--- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
+++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c
@@ -29,8 +29,8 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 	} else {
 		s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
 		s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
-		s3c_gpio_cfgpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
-		s3c_gpio_cfgpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE);
 	}
 }
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index b732b773b9a..0aa32f242ee 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -280,18 +280,17 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip,
 }
 #endif
 
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
-			 unsigned int off, s3c_gpio_pull_t pull)
+#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
+static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
+			 unsigned int off, s3c_gpio_pull_t pull,
+			 s3c_gpio_pull_t updown)
 {
 	void __iomem *reg = chip->base + 0x08;
 	u32 pup = __raw_readl(reg);
 
-	pup = __raw_readl(reg);
-
-	if (pup == S3C_GPIO_PULL_UP)
+	if (pull == updown)
 		pup &= ~(1 << off);
-	else if (pup == S3C_GPIO_PULL_NONE)
+	else if (pull == S3C_GPIO_PULL_NONE)
 		pup |= (1 << off);
 	else
 		return -EINVAL;
@@ -300,17 +299,45 @@ int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
 	return 0;
 }
 
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
-				     unsigned int off)
+static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
+				     unsigned int off, s3c_gpio_pull_t updown)
 {
 	void __iomem *reg = chip->base + 0x08;
 	u32 pup = __raw_readl(reg);
 
 	pup &= (1 << off);
-	return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP;
+	return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UP
+s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
+				     unsigned int off)
+{
+	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+			 unsigned int off, s3c_gpio_pull_t pull)
+{
+	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
 }
 #endif /* CONFIG_S3C_GPIO_PULL_UP */
 
+#ifdef CONFIG_S3C_GPIO_PULL_DOWN
+s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+				     unsigned int off)
+{
+	return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+			 unsigned int off, s3c_gpio_pull_t pull)
+{
+	return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
+
 #ifdef CONFIG_S5P_GPIO_DRVSTR
 s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
 {
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 8fd65d8b586..0d2c5703f1e 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -210,6 +210,17 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
 					    unsigned int off);
 
 /**
+ * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-down resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_1down.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+					    unsigned int off);
+
+/**
  * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
  * @chip: The gpio chip that is being configured.
  * @off: The offset for the GPIO being configured.
diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h
index 298bafc0a52..2572260f990 100644
--- a/arch/arm/plat-spear/include/plat/clock.h
+++ b/arch/arm/plat-spear/include/plat/clock.h
@@ -15,7 +15,7 @@
 #define __PLAT_CLOCK_H
 
 #include <linux/list.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <linux/types.h>
 
 /* clk structure flags */
diff --git a/arch/arm/plat-spear/include/plat/keyboard.h b/arch/arm/plat-spear/include/plat/keyboard.h
new file mode 100644
index 00000000000..68b5394fc58
--- /dev/null
+++ b/arch/arm/plat-spear/include/plat/keyboard.h
@@ -0,0 +1,141 @@
+/*
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_KEYBOARD_H
+#define __PLAT_KEYBOARD_H
+
+#include <linux/bitops.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/types.h>
+
+#define DECLARE_KEYMAP(_name) \
+int _name[] = { \
+	KEY(0, 0, KEY_ESC), \
+	KEY(0, 1, KEY_1), \
+	KEY(0, 2, KEY_2), \
+	KEY(0, 3, KEY_3), \
+	KEY(0, 4, KEY_4), \
+	KEY(0, 5, KEY_5), \
+	KEY(0, 6, KEY_6), \
+	KEY(0, 7, KEY_7), \
+	KEY(0, 8, KEY_8), \
+	KEY(1, 0, KEY_9), \
+	KEY(1, 1, KEY_MINUS), \
+	KEY(1, 2, KEY_EQUAL), \
+	KEY(1, 3, KEY_BACKSPACE), \
+	KEY(1, 4, KEY_TAB), \
+	KEY(1, 5, KEY_Q), \
+	KEY(1, 6, KEY_W), \
+	KEY(1, 7, KEY_E), \
+	KEY(1, 8, KEY_R), \
+	KEY(2, 0, KEY_T), \
+	KEY(2, 1, KEY_Y), \
+	KEY(2, 2, KEY_U), \
+	KEY(2, 3, KEY_I), \
+	KEY(2, 4, KEY_O), \
+	KEY(2, 5, KEY_P), \
+	KEY(2, 6, KEY_LEFTBRACE), \
+	KEY(2, 7, KEY_RIGHTBRACE), \
+	KEY(2, 8, KEY_ENTER), \
+	KEY(3, 0, KEY_LEFTCTRL), \
+	KEY(3, 1, KEY_A), \
+	KEY(3, 2, KEY_S), \
+	KEY(3, 3, KEY_D), \
+	KEY(3, 4, KEY_F), \
+	KEY(3, 5, KEY_G), \
+	KEY(3, 6, KEY_H), \
+	KEY(3, 7, KEY_J), \
+	KEY(3, 8, KEY_K), \
+	KEY(4, 0, KEY_L), \
+	KEY(4, 1, KEY_SEMICOLON), \
+	KEY(4, 2, KEY_APOSTROPHE), \
+	KEY(4, 3, KEY_GRAVE), \
+	KEY(4, 4, KEY_LEFTSHIFT), \
+	KEY(4, 5, KEY_BACKSLASH), \
+	KEY(4, 6, KEY_Z), \
+	KEY(4, 7, KEY_X), \
+	KEY(4, 8, KEY_C), \
+	KEY(4, 0, KEY_L), \
+	KEY(4, 1, KEY_SEMICOLON), \
+	KEY(4, 2, KEY_APOSTROPHE), \
+	KEY(4, 3, KEY_GRAVE), \
+	KEY(4, 4, KEY_LEFTSHIFT), \
+	KEY(4, 5, KEY_BACKSLASH), \
+	KEY(4, 6, KEY_Z), \
+	KEY(4, 7, KEY_X), \
+	KEY(4, 8, KEY_C), \
+	KEY(4, 0, KEY_L), \
+	KEY(4, 1, KEY_SEMICOLON), \
+	KEY(4, 2, KEY_APOSTROPHE), \
+	KEY(4, 3, KEY_GRAVE), \
+	KEY(4, 4, KEY_LEFTSHIFT), \
+	KEY(4, 5, KEY_BACKSLASH), \
+	KEY(4, 6, KEY_Z), \
+	KEY(4, 7, KEY_X), \
+	KEY(4, 8, KEY_C), \
+	KEY(5, 0, KEY_V), \
+	KEY(5, 1, KEY_B), \
+	KEY(5, 2, KEY_N), \
+	KEY(5, 3, KEY_M), \
+	KEY(5, 4, KEY_COMMA), \
+	KEY(5, 5, KEY_DOT), \
+	KEY(5, 6, KEY_SLASH), \
+	KEY(5, 7, KEY_RIGHTSHIFT), \
+	KEY(5, 8, KEY_KPASTERISK), \
+	KEY(6, 0, KEY_LEFTALT), \
+	KEY(6, 1, KEY_SPACE), \
+	KEY(6, 2, KEY_CAPSLOCK), \
+	KEY(6, 3, KEY_F1), \
+	KEY(6, 4, KEY_F2), \
+	KEY(6, 5, KEY_F3), \
+	KEY(6, 6, KEY_F4), \
+	KEY(6, 7, KEY_F5), \
+	KEY(6, 8, KEY_F6), \
+	KEY(7, 0, KEY_F7), \
+	KEY(7, 1, KEY_F8), \
+	KEY(7, 2, KEY_F9), \
+	KEY(7, 3, KEY_F10), \
+	KEY(7, 4, KEY_NUMLOCK), \
+	KEY(7, 5, KEY_SCROLLLOCK), \
+	KEY(7, 6, KEY_KP7), \
+	KEY(7, 7, KEY_KP8), \
+	KEY(7, 8, KEY_KP9), \
+	KEY(8, 0, KEY_KPMINUS), \
+	KEY(8, 1, KEY_KP4), \
+	KEY(8, 2, KEY_KP5), \
+	KEY(8, 3, KEY_KP6), \
+	KEY(8, 4, KEY_KPPLUS), \
+	KEY(8, 5, KEY_KP1), \
+	KEY(8, 6, KEY_KP2), \
+	KEY(8, 7, KEY_KP3), \
+	KEY(8, 8, KEY_KP0), \
+}
+
+/**
+ * struct kbd_platform_data - spear keyboard platform data
+ * keymap: pointer to keymap data (table and size)
+ * rep: enables key autorepeat
+ *
+ * This structure is supposed to be used by platform code to supply
+ * keymaps to drivers that implement keyboards.
+ */
+struct kbd_platform_data {
+	const struct matrix_keymap_data *keymap;
+	bool rep;
+};
+
+/* This function is used to set platform data field of pdev->dev */
+static inline void
+kbd_set_plat_data(struct platform_device *pdev, struct kbd_platform_data *data)
+{
+	pdev->dev.platform_data = data;
+}
+
+#endif /* __PLAT_KEYBOARD_H */
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index ab211652e4c..839c88df999 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -81,8 +81,6 @@ static struct clocksource clksrc = {
 	.rating = 200,		/* its a pretty decent clock */
 	.read = clocksource_read_cycles,
 	.mask = 0xFFFF,		/* 16 bits */
-	.mult = 0,		/* to be computed */
-	.shift = 0,		/* to be computed */
 	.flags = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -105,10 +103,8 @@ static void spear_clocksource_init(void)
 	val |= CTRL_ENABLE ;
 	writew(val, gpt_base + CR(CLKSRC));
 
-	clocksource_calc_mult_shift(&clksrc, tick_rate, SPEAR_MIN_RANGE);
-
 	/* register the clocksource */
-	clocksource_register(&clksrc);
+	clocksource_register_hz(&clksrc, tick_rate);
 }
 
 static struct clock_event_device clkevt = {
diff --git a/arch/arm/plat-stmp3xxx/clock.c b/arch/arm/plat-stmp3xxx/clock.c
index e593a2a801c..2e712e17ce7 100644
--- a/arch/arm/plat-stmp3xxx/clock.c
+++ b/arch/arm/plat-stmp3xxx/clock.c
@@ -25,9 +25,9 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <linux/io.h>
+#include <linux/clkdev.h>
 
 #include <asm/mach-types.h>
-#include <asm/clkdev.h>
 #include <mach/platform.h>
 #include <mach/regs-clkctrl.h>
 
diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c
index 063c7bc0e74..c395630a6ed 100644
--- a/arch/arm/plat-stmp3xxx/timer.c
+++ b/arch/arm/plat-stmp3xxx/timer.c
@@ -89,7 +89,6 @@ static struct clocksource cksrc_stmp3xxx = {
 	.rating         = 250,
 	.read           = stmp3xxx_clock_read,
 	.mask           = CLOCKSOURCE_MASK(16),
-	.shift          = 10,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -106,8 +105,6 @@ static struct irqaction stmp3xxx_timer_irq = {
  */
 static void __init stmp3xxx_init_timer(void)
 {
-	cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE,
-				cksrc_stmp3xxx.shift);
 	ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
 				ckevt_timrot.shift);
 	ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot);
@@ -140,7 +137,7 @@ static void __init stmp3xxx_init_timer(void)
 
 	setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq);
 
-	clocksource_register(&cksrc_stmp3xxx);
+	clocksource_register_hz(&cksrc_stmp3xxx, CLOCK_TICK_RATE);
 	clockevents_register_device(&ckevt_timrot);
 }
 
diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile
index 5cf88e8427b..16dde081993 100644
--- a/arch/arm/plat-versatile/Makefile
+++ b/arch/arm/plat-versatile/Makefile
@@ -1,7 +1,7 @@
 obj-y	:= clock.o
-obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
-obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o
-obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o
+ifneq ($(CONFIG_ARCH_INTEGRATOR),y)
+obj-y	+= sched-clock.o
+endif
 ifeq ($(CONFIG_LEDS_CLASS),y)
 obj-$(CONFIG_ARCH_REALVIEW) += leds.o
 obj-$(CONFIG_ARCH_VERSATILE) += leds.o
diff --git a/arch/arm/plat-versatile/include/plat/sched_clock.h b/arch/arm/plat-versatile/include/plat/sched_clock.h
new file mode 100644
index 00000000000..5c3e4fc9fa0
--- /dev/null
+++ b/arch/arm/plat-versatile/include/plat/sched_clock.h
@@ -0,0 +1,6 @@
+#ifndef ARM_PLAT_SCHED_CLOCK_H
+#define ARM_PLAT_SCHED_CLOCK_H
+
+void versatile_sched_clock_init(void __iomem *, unsigned long);
+
+#endif
diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c
index 9768cf7e83d..3d6a4c292ca 100644
--- a/arch/arm/plat-versatile/sched-clock.c
+++ b/arch/arm/plat-versatile/sched-clock.c
@@ -18,36 +18,41 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#include <linux/cnt32_to_63.h>
 #include <linux/io.h>
-#include <asm/div64.h>
+#include <linux/sched.h>
 
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include <asm/sched_clock.h>
+#include <plat/sched_clock.h>
 
-#ifdef VERSATILE_SYS_BASE
-#define REFCOUNTER	(__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET)
-#endif
-
-#ifdef REALVIEW_SYS_BASE
-#define REFCOUNTER	(__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)
-#endif
+static DEFINE_CLOCK_DATA(cd);
+static void __iomem *ctr;
 
 /*
- * This is the Realview and Versatile sched_clock implementation.  This
- * has a resolution of 41.7ns, and a maximum value of about 35583 days.
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 89 seconds between successive
- * calls to this function.
+ * Constants generated by clocks_calc_mult_shift(m, s, 24MHz, NSEC_PER_SEC, 60).
+ * This gives a resolution of about 41ns and a wrap period of about 178s.
  */
-unsigned long long sched_clock(void)
+#define SC_MULT		2796202667u
+#define SC_SHIFT	26
+
+unsigned long long notrace sched_clock(void)
 {
-	unsigned long long v = cnt32_to_63(readl(REFCOUNTER));
+	if (ctr) {
+		u32 cyc = readl(ctr);
+		return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0,
+						SC_MULT, SC_SHIFT);
+	} else
+		return 0;
+}
 
-	/* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */
-	v *= 125<<1;
-	do_div(v, 3<<1);
+static void notrace versatile_update_sched_clock(void)
+{
+	u32 cyc = readl(ctr);
+	update_sched_clock(&cd, cyc, (u32)~0);
+}
 
-	return v;
+void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate)
+{
+	ctr = reg;
+	init_fixed_sched_clock(&cd, versatile_update_sched_clock,
+			       32, rate, SC_MULT, SC_SHIFT);
 }
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 55590a4d87c..2fea897ebeb 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Sep 9 22:43:01 2010
+# Last update: Sun Dec 12 23:24:27 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2321,7 +2321,7 @@ mx31txtr		MACH_MX31TXTR		MX31TXTR		2332
 u380			MACH_U380		U380			2333
 oamp3_hualu		MACH_HUALU_BOARD	HUALU_BOARD		2334
 npcmx50			MACH_NPCMX50		NPCMX50			2335
-mx51_lange51		MACH_MX51_LANGE51	MX51_LANGE51		2336
+mx51_efikamx		MACH_MX51_EFIKAMX	MX51_EFIKAMX		2336
 mx51_lange52		MACH_MX51_LANGE52	MX51_LANGE52		2337
 riom			MACH_RIOM		RIOM			2338
 comcas			MACH_COMCAS		COMCAS			2339
@@ -2355,7 +2355,7 @@ at91sam9263cs		MACH_AT91SAM9263CS	AT91SAM9263CS		2366
 csb732			MACH_CSB732		CSB732			2367
 u8500			MACH_U8500		U8500			2368
 huqiu			MACH_HUQIU		HUQIU			2369
-mx51_kunlun		MACH_MX51_KUNLUN	MX51_KUNLUN		2370
+mx51_efikasb		MACH_MX51_EFIKASB	MX51_EFIKASB		2370
 pmt1g			MACH_PMT1G		PMT1G			2371
 htcelf			MACH_HTCELF		HTCELF			2372
 armadillo420		MACH_ARMADILLO420	ARMADILLO420		2373
@@ -2971,7 +2971,7 @@ premierwave_en		MACH_PREMIERWAVE_EN	PREMIERWAVE_EN		2985
 wasabi			MACH_WASABI		WASABI			2986
 vivow			MACH_VIVOW		VIVOW			2987
 mx50_rdp		MACH_MX50_RDP		MX50_RDP		2988
-universal		MACH_UNIVERSAL		UNIVERSAL		2989
+universal_c210		MACH_UNIVERSAL_C210	UNIVERSAL_C210		2989
 real6410		MACH_REAL6410		REAL6410		2990
 spx_sakura		MACH_SPX_SAKURA		SPX_SAKURA		2991
 ij3k_2440		MACH_IJ3K_2440		IJ3K_2440		2992
@@ -3044,3 +3044,178 @@ harvest_desoto		MACH_HARVEST_DESOTO	HARVEST_DESOTO		3059
 msm8x60_qrdc		MACH_MSM8X60_QRDC	MSM8X60_QRDC		3060
 spear900		MACH_SPEAR900		SPEAR900		3061
 pcontrol_g20		MACH_PCONTROL_G20	PCONTROL_G20		3062
+rdstor			MACH_RDSTOR		RDSTOR			3063
+usdloader		MACH_USDLOADER		USDLOADER		3064
+tsoploader		MACH_TSOPLOADER		TSOPLOADER		3065
+kronos			MACH_KRONOS		KRONOS			3066
+ffcore			MACH_FFCORE		FFCORE			3067
+mone			MACH_MONE		MONE			3068
+unit2s			MACH_UNIT2S		UNIT2S			3069
+acer_a5			MACH_ACER_A5		ACER_A5			3070
+etherpro_isp		MACH_ETHERPRO_ISP	ETHERPRO_ISP		3071
+stretchs7000		MACH_STRETCHS7000	STRETCHS7000		3072
+p87_smartsim		MACH_P87_SMARTSIM	P87_SMARTSIM		3073
+tulip			MACH_TULIP		TULIP			3074
+sunflower		MACH_SUNFLOWER		SUNFLOWER		3075
+rib			MACH_RIB		RIB			3076
+clod			MACH_CLOD		CLOD			3077
+rump			MACH_RUMP		RUMP			3078
+tenderloin		MACH_TENDERLOIN		TENDERLOIN		3079
+shortloin		MACH_SHORTLOIN		SHORTLOIN		3080
+crespo			MACH_CRESPO		CRESPO			3081
+antares			MACH_ANTARES		ANTARES			3082
+wb40n			MACH_WB40N		WB40N			3083
+herring			MACH_HERRING		HERRING			3084
+naxy400			MACH_NAXY400		NAXY400			3085
+naxy1200		MACH_NAXY1200		NAXY1200		3086
+vpr200			MACH_VPR200		VPR200			3087
+bug20			MACH_BUG20		BUG20			3088
+goflexnet		MACH_GOFLEXNET		GOFLEXNET		3089
+torbreck		MACH_TORBRECK		TORBRECK		3090
+saarb_mg1		MACH_SAARB_MG1		SAARB_MG1		3091
+callisto		MACH_CALLISTO		CALLISTO		3092
+multhsu			MACH_MULTHSU		MULTHSU			3093
+saluda			MACH_SALUDA		SALUDA			3094
+pemp_omap3_apollo	MACH_PEMP_OMAP3_APOLLO	PEMP_OMAP3_APOLLO	3095
+vc0718			MACH_VC0718		VC0718			3096
+mvblx			MACH_MVBLX		MVBLX			3097
+inhand_apeiron		MACH_INHAND_APEIRON	INHAND_APEIRON		3098
+inhand_fury		MACH_INHAND_FURY	INHAND_FURY		3099
+inhand_siren		MACH_INHAND_SIREN	INHAND_SIREN		3100
+hdnvp			MACH_HDNVP		HDNVP			3101
+softwinner		MACH_SOFTWINNER		SOFTWINNER		3102
+prima2_evb		MACH_PRIMA2_EVB		PRIMA2_EVB		3103
+nas6210			MACH_NAS6210		NAS6210			3104
+unisdev			MACH_UNISDEV		UNISDEV			3105
+sbca11			MACH_SBCA11		SBCA11			3106
+saga			MACH_SAGA		SAGA			3107
+ns_k330			MACH_NS_K330		NS_K330			3108
+tanna			MACH_TANNA		TANNA			3109
+imate8502		MACH_IMATE8502		IMATE8502		3110
+aspen			MACH_ASPEN		ASPEN			3111
+daintree_cwac		MACH_DAINTREE_CWAC	DAINTREE_CWAC		3112
+zmx25			MACH_ZMX25		ZMX25			3113
+maple1			MACH_MAPLE1		MAPLE1			3114
+qsd8x72_surf		MACH_QSD8X72_SURF	QSD8X72_SURF		3115
+qsd8x72_ffa		MACH_QSD8X72_FFA	QSD8X72_FFA		3116
+abilene			MACH_ABILENE		ABILENE			3117
+eigen_ttr		MACH_EIGEN_TTR		EIGEN_TTR		3118
+iomega_ix2_200		MACH_IOMEGA_IX2_200	IOMEGA_IX2_200		3119
+coretec_vcx7400		MACH_CORETEC_VCX7400	CORETEC_VCX7400		3120
+santiago		MACH_SANTIAGO		SANTIAGO		3121
+mx257sol		MACH_MX257SOL		MX257SOL		3122
+strasbourg		MACH_STRASBOURG		STRASBOURG		3123
+msm8x60_fluid		MACH_MSM8X60_FLUID	MSM8X60_FLUID		3124
+smartqv5		MACH_SMARTQV5		SMARTQV5		3125
+smartqv3		MACH_SMARTQV3		SMARTQV3		3126
+smartqv7		MACH_SMARTQV7		SMARTQV7		3127
+paz00			MACH_PAZ00		PAZ00			3128
+acmenetusfoxg20		MACH_ACMENETUSFOXG20	ACMENETUSFOXG20		3129
+htcwillow		MACH_HTCWILLOW		HTCWILLOW		3130
+fwbd_0404		MACH_FWBD_0404		FWBD_0404		3131
+hdgu			MACH_HDGU		HDGU			3132
+pyramid			MACH_PYRAMID		PYRAMID			3133
+epiphan			MACH_EPIPHAN		EPIPHAN			3134
+omap_bender		MACH_OMAP_BENDER	OMAP_BENDER		3135
+gurnard			MACH_GURNARD		GURNARD			3136
+gtl_it5100		MACH_GTL_IT5100		GTL_IT5100		3137
+bcm2708			MACH_BCM2708		BCM2708			3138
+mx51_ggc		MACH_MX51_GGC		MX51_GGC		3139
+sharespace		MACH_SHARESPACE		SHARESPACE		3140
+haba_knx_explorer	MACH_HABA_KNX_EXPLORER	HABA_KNX_EXPLORER	3141
+simtec_kirkmod		MACH_SIMTEC_KIRKMOD	SIMTEC_KIRKMOD		3142
+crux			MACH_CRUX		CRUX			3143
+mx51_bravo		MACH_MX51_BRAVO		MX51_BRAVO		3144
+charon			MACH_CHARON		CHARON			3145
+picocom3		MACH_PICOCOM3		PICOCOM3		3146
+picocom4		MACH_PICOCOM4		PICOCOM4		3147
+serrano			MACH_SERRANO		SERRANO			3148
+doubleshot		MACH_DOUBLESHOT		DOUBLESHOT		3149
+evsy			MACH_EVSY		EVSY			3150
+huashan			MACH_HUASHAN		HUASHAN			3151
+lausanne		MACH_LAUSANNE		LAUSANNE		3152
+emerald			MACH_EMERALD		EMERALD			3153
+tqma35			MACH_TQMA35		TQMA35			3154
+marvel			MACH_MARVEL		MARVEL			3155
+manuae			MACH_MANUAE		MANUAE			3156
+chacha			MACH_CHACHA		CHACHA			3157
+lemon			MACH_LEMON		LEMON			3158
+csc			MACH_CSC		CSC			3159
+gira_knxip_router	MACH_GIRA_KNXIP_ROUTER	GIRA_KNXIP_ROUTER	3160
+t20			MACH_T20		T20			3161
+hdmini			MACH_HDMINI		HDMINI			3162
+sciphone_g2		MACH_SCIPHONE_G2	SCIPHONE_G2		3163
+express			MACH_EXPRESS		EXPRESS			3164
+express_kt		MACH_EXPRESS_KT		EXPRESS_KT		3165
+maximasp		MACH_MAXIMASP		MAXIMASP		3166
+nitrogen_imx51		MACH_NITROGEN_IMX51	NITROGEN_IMX51		3167
+nitrogen_imx53		MACH_NITROGEN_IMX53	NITROGEN_IMX53		3168
+sunfire			MACH_SUNFIRE		SUNFIRE			3169
+arowana			MACH_AROWANA		AROWANA			3170
+tegra_daytona		MACH_TEGRA_DAYTONA	TEGRA_DAYTONA		3171
+tegra_swordfish		MACH_TEGRA_SWORDFISH	TEGRA_SWORDFISH		3172
+edison			MACH_EDISON		EDISON			3173
+svp8500v1		MACH_SVP8500V1		SVP8500V1		3174
+svp8500v2		MACH_SVP8500V2		SVP8500V2		3175
+svp5500			MACH_SVP5500		SVP5500			3176
+b5500			MACH_B5500		B5500			3177
+s5500			MACH_S5500		S5500			3178
+icon			MACH_ICON		ICON			3179
+elephant		MACH_ELEPHANT		ELEPHANT		3180
+msm8x60_fusion		MACH_MSM8X60_FUSION	MSM8X60_FUSION		3181
+shooter			MACH_SHOOTER		SHOOTER			3182
+spade_lte		MACH_SPADE_LTE		SPADE_LTE		3183
+philhwani		MACH_PHILHWANI		PHILHWANI		3184
+gsncomm			MACH_GSNCOMM		GSNCOMM			3185
+strasbourg_a2		MACH_STRASBOURG_A2	STRASBOURG_A2		3186
+mmm			MACH_MMM		MMM			3187
+davinci_dm365_bv	MACH_DAVINCI_DM365_BV	DAVINCI_DM365_BV	3188
+ag5evm			MACH_AG5EVM		AG5EVM			3189
+sc575plc		MACH_SC575PLC		SC575PLC		3190
+sc575hmi		MACH_SC575IPC		SC575IPC		3191
+omap3_tdm3730		MACH_OMAP3_TDM3730	OMAP3_TDM3730		3192
+g7			MACH_G7			G7			3193
+top9000_eval		MACH_TOP9000_EVAL	TOP9000_EVAL		3194
+top9000_su		MACH_TOP9000_SU		TOP9000_SU		3195
+utm300			MACH_UTM300		UTM300			3196
+tsunagi			MACH_TSUNAGI		TSUNAGI			3197
+ts75xx			MACH_TS75XX		TS75XX			3198
+msm8x60_fusn_ffa	MACH_MSM8X60_FUSN_FFA	MSM8X60_FUSN_FFA	3199
+ts47xx			MACH_TS47XX		TS47XX			3200
+da850_k5		MACH_DA850_K5		DA850_K5		3201
+ax502			MACH_AX502		AX502			3202
+igep0032		MACH_IGEP0032		IGEP0032		3203
+antero			MACH_ANTERO		ANTERO			3204
+synergy			MACH_SYNERGY		SYNERGY			3205
+ics_if_voip		MACH_ICS_IF_VOIP	ICS_IF_VOIP		3206
+wlf_cragg_6410		MACH_WLF_CRAGG_6410	WLF_CRAGG_6410		3207
+punica			MACH_PUNICA		PUNICA			3208
+sbc_nt250		MACH_SBC_NT250		SBC_NT250		3209
+mx27_wmultra		MACH_MX27_WMULTRA	MX27_WMULTRA		3210
+mackerel		MACH_MACKEREL		MACKEREL		3211
+fa9x27			MACH_FA9X27		FA9X27			3213
+ns2816tb		MACH_NS2816TB		NS2816TB		3214
+ns2816_ntpad		MACH_NS2816_NTPAD	NS2816_NTPAD		3215
+ns2816_ntnb		MACH_NS2816_NTNB	NS2816_NTNB		3216
+kaen			MACH_KAEN		KAEN			3217
+nv1000			MACH_NV1000		NV1000			3218
+nuc950ts		MACH_NUC950TS		NUC950TS		3219
+nokia_rm680		MACH_NOKIA_RM680	NOKIA_RM680		3220
+ast2200			MACH_AST2200		AST2200			3221
+lead			MACH_LEAD		LEAD			3222
+unino1			MACH_UNINO1		UNINO1			3223
+greeco			MACH_GREECO		GREECO			3224
+verdi			MACH_VERDI		VERDI			3225
+dm6446_adbox		MACH_DM6446_ADBOX	DM6446_ADBOX		3226
+quad_salsa		MACH_QUAD_SALSA		QUAD_SALSA		3227
+abb_gma_1_1		MACH_ABB_GMA_1_1	ABB_GMA_1_1		3228
+svcid			MACH_SVCID		SVCID			3229
+msm8960_sim		MACH_MSM8960_SIM	MSM8960_SIM		3230
+msm8960_rumi3		MACH_MSM8960_RUMI3	MSM8960_RUMI3		3231
+icon_g			MACH_ICON_G		ICON_G			3232
+mb3			MACH_MB3		MB3			3233
+gsia18s			MACH_GSIA18S		GSIA18S			3234
+pivicc			MACH_PIVICC		PIVICC			3235
+pcm048			MACH_PCM048		PCM048			3236
+dds			MACH_DDS		DDS			3237
+chalten_xa1		MACH_CHALTEN_XA1	CHALTEN_XA1		3238
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index d66cead97d2..9897dcfc16d 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -206,6 +206,7 @@ ENTRY(vfp_save_state)
 	mov	pc, lr
 ENDPROC(vfp_save_state)
 
+	.align
 last_VFP_context_address:
 	.word	last_VFP_context
 
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 8063a322c79..0797cb528b4 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -10,9 +10,12 @@
  */
 #include <linux/module.h>
 #include <linux/types.h>
+#include <linux/cpu.h>
 #include <linux/kernel.h>
+#include <linux/notifier.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
+#include <linux/smp.h>
 #include <linux/init.h>
 
 #include <asm/cputype.h>
@@ -484,7 +487,24 @@ void vfp_flush_hwstate(struct thread_info *thread)
 	put_cpu();
 }
 
-#include <linux/smp.h>
+/*
+ * VFP hardware can lose all context when a CPU goes offline.
+ * Safely clear our held state when a CPU has been killed, and
+ * re-enable access to VFP when the CPU comes back online.
+ *
+ * Both CPU_DYING and CPU_STARTING are called on the CPU which
+ * is being offlined/onlined.
+ */
+static int vfp_hotplug(struct notifier_block *b, unsigned long action,
+	void *hcpu)
+{
+	if (action == CPU_DYING || action == CPU_DYING_FROZEN) {
+		unsigned int cpu = (long)hcpu;
+		last_VFP_context[cpu] = NULL;
+	} else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
+		vfp_enable(NULL);
+	return NOTIFY_OK;
+}
 
 /*
  * VFP support code initialisation.
@@ -514,6 +534,8 @@ static int __init vfp_init(void)
 	else if (vfpsid & FPSID_NODOUBLE) {
 		printk("no double precision support\n");
 	} else {
+		hotcpu_notifier(vfp_hotplug, 0);
+
 		smp_call_function(vfp_enable, NULL, 1);
 
 		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index cd0c090ebc5..b407bc8ad91 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -7,7 +7,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/unistd.h>
 #include <linux/user.h>
 #include <linux/uaccess.h>
diff --git a/arch/blackfin/mach-bf527/boards/ad7160eval.c b/arch/blackfin/mach-bf527/boards/ad7160eval.c
index fc767ac7638..52295fff557 100644
--- a/arch/blackfin/mach-bf527/boards/ad7160eval.c
+++ b/arch/blackfin/mach-bf527/boards/ad7160eval.c
@@ -83,7 +83,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 static u64 musb_dmamask = ~(u32)0;
 
 static struct platform_device musb_device = {
-	.name		= "musb_hdrc",
+	.name		= "musb-blackfin",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &musb_dmamask,
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 2c31af7a320..50533edc399 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -82,11 +82,13 @@ static struct resource musb_resources[] = {
 		.start	= IRQ_USB_INT0,
 		.end	= IRQ_USB_INT0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= IRQ_USB_DMA,
 		.end	= IRQ_USB_DMA,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
 	},
 };
 
@@ -118,7 +120,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 static u64 musb_dmamask = ~(u32)0;
 
 static struct platform_device musb_device = {
-	.name		= "musb_hdrc",
+	.name		= "musb-blackfin",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &musb_dmamask,
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 9a736a850c5..d06177b5fe2 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -46,11 +46,13 @@ static struct resource musb_resources[] = {
 		.start	= IRQ_USB_INT0,
 		.end	= IRQ_USB_INT0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= IRQ_USB_DMA,
 		.end	= IRQ_USB_DMA,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
 	},
 };
 
@@ -82,7 +84,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 static u64 musb_dmamask = ~(u32)0;
 
 static struct platform_device musb_device = {
-	.name		= "musb_hdrc",
+	.name		= "musb-blackfin",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &musb_dmamask,
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 9222bc00bbd..35a88a5a501 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -86,11 +86,13 @@ static struct resource musb_resources[] = {
 		.start	= IRQ_USB_INT0,
 		.end	= IRQ_USB_INT0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= IRQ_USB_DMA,
 		.end	= IRQ_USB_DMA,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
 	},
 };
 
@@ -122,7 +124,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 static u64 musb_dmamask = ~(u32)0;
 
 static struct platform_device musb_device = {
-	.name		= "musb_hdrc",
+	.name		= "musb-blackfin",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &musb_dmamask,
diff --git a/arch/blackfin/mach-bf527/boards/tll6527m.c b/arch/blackfin/mach-bf527/boards/tll6527m.c
index 9ec575729e2..130861bd258 100644
--- a/arch/blackfin/mach-bf527/boards/tll6527m.c
+++ b/arch/blackfin/mach-bf527/boards/tll6527m.c
@@ -91,7 +91,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 static u64 musb_dmamask = ~(u32)0;
 
 static struct platform_device musb_device = {
-	.name		= "musb_hdrc",
+	.name		= "musb-blackfin",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &musb_dmamask,
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index f0c0eef95ba..4c2ee678909 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -482,11 +482,13 @@ static struct resource musb_resources[] = {
 		.start	= IRQ_USB_INT0,
 		.end	= IRQ_USB_INT0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= IRQ_USB_DMA,
 		.end	= IRQ_USB_DMA,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
 	},
 };
 
@@ -518,7 +520,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 static u64 musb_dmamask = ~(u32)0;
 
 static struct platform_device musb_device = {
-	.name		= "musb_hdrc",
+	.name		= "musb-blackfin",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &musb_dmamask,
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 216e26999af..4f03fbc4c9b 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -587,11 +587,13 @@ static struct resource musb_resources[] = {
 		.start	= IRQ_USB_INT0,
 		.end	= IRQ_USB_INT0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "mc"
 	},
 	[2] = {	/* DMA IRQ */
 		.start	= IRQ_USB_DMA,
 		.end	= IRQ_USB_DMA,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+		.name	= "dma"
 	},
 };
 
@@ -623,7 +625,7 @@ static struct musb_hdrc_platform_data musb_plat = {
 static u64 musb_dmamask = ~(u32)0;
 
 static struct platform_device musb_device = {
-	.name		= "musb_hdrc",
+	.name		= "musb-blackfin",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &musb_dmamask,
diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c
index 2b63b0191f5..efad12071c2 100644
--- a/arch/frv/kernel/process.c
+++ b/arch/frv/kernel/process.c
@@ -16,7 +16,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index 97478138e36..933bd388efb 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -28,7 +28,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index 3a078ad3aa4..331de723c67 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -202,7 +202,7 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
 }
 
 static int
-simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+simscsi_queuecommand_lck (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
 	unsigned int target_id = sc->device->id;
 	char fname[MAX_ROOT_LEN+16];
@@ -326,6 +326,8 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(simscsi_queuecommand)
+
 static int
 simscsi_host_reset (struct scsi_cmnd *sc)
 {
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 39e534f5a3b..f099b82703d 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -1542,7 +1542,7 @@ pfm_exit_smpl_buffer(pfm_buffer_fmt_t *fmt)
  * any operations on the root directory. However, we need a non-trivial
  * d_name - pfm: will go nicely and kill the special-casing in procfs.
  */
-static struct vfsmount *pfmfs_mnt;
+static struct vfsmount *pfmfs_mnt __read_mostly;
 
 static int __init
 init_pfm_fs(void)
@@ -2185,7 +2185,7 @@ static const struct file_operations pfm_file_ops = {
 };
 
 static int
-pfmfs_delete_dentry(struct dentry *dentry)
+pfmfs_delete_dentry(const struct dentry *dentry)
 {
 	return 1;
 }
@@ -2233,7 +2233,7 @@ pfm_alloc_file(pfm_context_t *ctx)
 	}
 	path.mnt = mntget(pfmfs_mnt);
 
-	path.dentry->d_op = &pfmfs_dentry_operations;
+	d_set_d_op(path.dentry, &pfmfs_dentry_operations);
 	d_add(path.dentry, inode);
 
 	file = alloc_file(&path, FMODE_READ, &pfm_file_ops);
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 18732ab2329..c2a1fc23dd7 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -18,7 +18,6 @@
 #include <linux/slab.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 6d3390590e5..e2a63af5d51 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -19,7 +19,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 67a2fa2caa4..0a9b5b8b2a1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -19,6 +19,8 @@ config MIPS
 	select GENERIC_ATOMIC64 if !64BIT
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
+	select HAVE_GENERIC_HARDIRQS
+	select GENERIC_IRQ_PROBE
 
 menu "Machine selection"
 
@@ -1664,6 +1666,28 @@ config PAGE_SIZE_64KB
 
 endchoice
 
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+	default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+	range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+	default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+	range 11 64
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+	  The page size is not necessarily 4KB.  Keep this in mind
+	  when choosing a value for this option.
+
 config BOARD_SCACHE
 	bool
 
@@ -1922,20 +1946,6 @@ config CPU_R4400_WORKAROUNDS
 	bool
 
 #
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config IRQ_PER_CPU
-	bool
-
-#
 # - Highmem only makes sense for the 32-bit kernel.
 # - The current highmem code will only work properly on physically indexed
 #   caches such as R3000, SB1, R7000 or those that look like they're virtually
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 3691630931d..9e7814db3d0 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -27,6 +27,7 @@
 static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
 			    unsigned int old_state)
 {
+#ifdef CONFIG_SERIAL_8250
 	switch (state) {
 	case 0:
 		if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
@@ -49,6 +50,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
 		serial8250_do_pm(port, state, old_state);
 		break;
 	}
+#endif
 }
 
 #define PORT(_base, _irq)					\
diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c
index b30df5c97ad..baeb2138505 100644
--- a/arch/mips/alchemy/devboards/prom.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -54,10 +54,9 @@ void __init prom_init(void)
 
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
+	if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
 		memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
+
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
 
diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c
index fc0e7154e8d..2ca4ada1c29 100644
--- a/arch/mips/ar7/clock.c
+++ b/arch/mips/ar7/clock.c
@@ -239,12 +239,12 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock,
 	calculate(base_clock, frequency, &prediv, &postdiv, &mul);
 
 	writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
-	msleep(1);
+	mdelay(1);
 	writel(4, &clock->pll);
 	while (readl(&clock->pll) & PLL_STATUS)
 		;
 	writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
-	msleep(75);
+	mdelay(75);
 }
 
 static void __init tnetd7300_init_clocks(void)
@@ -456,7 +456,7 @@ void clk_put(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_put);
 
-int __init ar7_init_clocks(void)
+void __init ar7_init_clocks(void)
 {
 	switch (ar7_chip_id()) {
 	case AR7_CHIP_7100:
@@ -472,7 +472,4 @@ int __init ar7_init_clocks(void)
 	}
 	/* adjust vbus clock rate */
 	vbus_clk.rate = bus_clk.rate / 2;
-
-	return 0;
 }
-arch_initcall(ar7_init_clocks);
diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c
index 5fb8a013408..22c93213b23 100644
--- a/arch/mips/ar7/time.c
+++ b/arch/mips/ar7/time.c
@@ -30,6 +30,9 @@ void __init plat_time_init(void)
 {
 	struct clk *cpu_clk;
 
+	/* Initialize ar7 clocks so the CPU clock frequency is correct */
+	ar7_init_clocks();
+
 	cpu_clk = clk_get(NULL, "cpu");
 	if (IS_ERR(cpu_clk)) {
 		printk(KERN_ERR "unable to get cpu clock\n");
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index b1aee33efd1..c95f90bf734 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -32,7 +32,6 @@
 #include <asm/reboot.h>
 #include <asm/time.h>
 #include <bcm47xx.h>
-#include <asm/fw/cfe/cfe_api.h>
 #include <asm/mach-bcm47xx/nvram.h>
 
 struct ssb_bus ssb_bcm47xx;
@@ -57,68 +56,112 @@ static void bcm47xx_machine_halt(void)
 		cpu_relax();
 }
 
-static void str2eaddr(char *str, char *dest)
-{
-	int i = 0;
+#define READ_FROM_NVRAM(_outvar, name, buf) \
+	if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+		sprom->_outvar = simple_strtoul(buf, NULL, 0);
 
-	if (str == NULL) {
-		memset(dest, 0, 6);
-		return;
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+{
+	char buf[100];
+	u32 boardflags;
+
+	memset(sprom, 0, sizeof(struct ssb_sprom));
+
+	sprom->revision = 1; /* Fallback: Old hardware does not define this. */
+	READ_FROM_NVRAM(revision, "sromrev", buf);
+	if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+		nvram_parse_macaddr(buf, sprom->il0mac);
+	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+		nvram_parse_macaddr(buf, sprom->et0mac);
+	if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+		nvram_parse_macaddr(buf, sprom->et1mac);
+	READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
+	READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
+	READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
+	READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf);
+	READ_FROM_NVRAM(board_rev, "boardrev", buf);
+	READ_FROM_NVRAM(country_code, "ccode", buf);
+	READ_FROM_NVRAM(ant_available_a, "aa5g", buf);
+	READ_FROM_NVRAM(ant_available_bg, "aa2g", buf);
+	READ_FROM_NVRAM(pa0b0, "pa0b0", buf);
+	READ_FROM_NVRAM(pa0b1, "pa0b1", buf);
+	READ_FROM_NVRAM(pa0b2, "pa0b2", buf);
+	READ_FROM_NVRAM(pa1b0, "pa1b0", buf);
+	READ_FROM_NVRAM(pa1b1, "pa1b1", buf);
+	READ_FROM_NVRAM(pa1b2, "pa1b2", buf);
+	READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf);
+	READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf);
+	READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf);
+	READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
+	READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
+	READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
+	READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
+	READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
+	READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
+	READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
+	READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
+	READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
+	READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
+	READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
+	READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
+	READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
+	READ_FROM_NVRAM(tri2g, "tri2g", buf);
+	READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
+	READ_FROM_NVRAM(tri5g, "tri5g", buf);
+	READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
+	READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
+	READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
+	READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
+	READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf);
+	READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf);
+	READ_FROM_NVRAM(bxa2g, "bxa2g", buf);
+	READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf);
+	READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf);
+	READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
+	READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
+	READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
+	READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
+	READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
+	READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
+	READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
+
+	if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
+		boardflags = simple_strtoul(buf, NULL, 0);
+		if (boardflags) {
+			sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
+			sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
+		}
 	}
-
-	for (;;) {
-		dest[i++] = (char) simple_strtoul(str, NULL, 16);
-		str += 2;
-		if (!*str++ || i == 6)
-			break;
+	if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
+		boardflags = simple_strtoul(buf, NULL, 0);
+		if (boardflags) {
+			sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
+			sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
+		}
 	}
 }
 
 static int bcm47xx_get_invariants(struct ssb_bus *bus,
 				   struct ssb_init_invariants *iv)
 {
-	char buf[100];
+	char buf[20];
 
 	/* Fill boardinfo structure */
 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
 
-	if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
-		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+	if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+		iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
+	else
+		iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
+	if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
-	if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+	if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
 		iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
 
-	/* Fill sprom structure */
-	memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
-	iv->sprom.revision = 3;
-
-	if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
-		str2eaddr(buf, iv->sprom.et0mac);
+	bcm47xx_fill_sprom(&iv->sprom);
 
-	if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
-		str2eaddr(buf, iv->sprom.et1mac);
-
-	if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
-
-	if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
-		iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
-
-	if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
-		iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-
-	if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
-	    nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
-		iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+	if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
 
 	return 0;
 }
@@ -126,12 +169,28 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus,
 void __init plat_mem_setup(void)
 {
 	int err;
+	char buf[100];
+	struct ssb_mipscore *mcore;
 
 	err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
 				      bcm47xx_get_invariants);
 	if (err)
 		panic("Failed to initialize SSB bus (err %d)\n", err);
 
+	mcore = &ssb_bcm47xx.mipscore;
+	if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+		if (strstr(buf, "console=ttyS1")) {
+			struct ssb_serial_port port;
+
+			printk(KERN_DEBUG "Swapping serial ports!\n");
+			/* swap serial ports */
+			memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+			memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
+			       sizeof(port));
+			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+		}
+	}
+
 	_machine_restart = bcm47xx_machine_restart;
 	_machine_halt = bcm47xx_machine_halt;
 	pm_power_off = bcm47xx_machine_halt;
diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 06d59dcbe24..86877539c6e 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -111,8 +111,8 @@
  * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
  */
 
-#define PRID_IMP_BMIPS4KC	0x4000
-#define PRID_IMP_BMIPS32	0x8000
+#define PRID_IMP_BMIPS32_REV4	0x4000
+#define PRID_IMP_BMIPS32_REV8	0x8000
 #define PRID_IMP_BMIPS3300	0x9000
 #define PRID_IMP_BMIPS3300_ALT	0x9100
 #define PRID_IMP_BMIPS3300_BUG	0x0000
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index fd1d39eb743..455c0ac7d4e 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -249,7 +249,8 @@ extern struct mips_abi mips_abi_n32;
 
 #define SET_PERSONALITY(ex)						\
 do {									\
-	set_personality(PER_LINUX);					\
+	if (personality(current->personality) != PER_LINUX)		\
+		set_personality(PER_LINUX);				\
 									\
 	current->thread.abi = &mips_abi;				\
 } while (0)
@@ -296,6 +297,8 @@ do {									\
 
 #define SET_PERSONALITY(ex)						\
 do {									\
+	unsigned int p;							\
+									\
 	clear_thread_flag(TIF_32BIT_REGS);				\
 	clear_thread_flag(TIF_32BIT_ADDR);				\
 									\
@@ -304,7 +307,8 @@ do {									\
 	else								\
 		current->thread.abi = &mips_abi;			\
 									\
-	if (current->personality != PER_LINUX32)			\
+	p = personality(current->personality);				\
+	if (p != PER_LINUX32 && p != PER_LINUX)				\
 		set_personality(PER_LINUX);				\
 } while (0)
 
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index c98bf514ec7..5b017f23e24 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -329,10 +329,14 @@ static inline void pfx##write##bwlq(type val,				\
 			"dsrl32	%L0, %L0, 0"			"\n\t"	\
 			"dsll32	%M0, %M0, 0"			"\n\t"	\
 			"or	%L0, %L0, %M0"			"\n\t"	\
+			".set	push"				"\n\t"	\
+			".set	noreorder"			"\n\t"	\
+			".set	nomacro"			"\n\t"	\
 			"sd	%L0, %2"			"\n\t"	\
+			".set	pop"				"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__tmp)					\
-			: "0" (__val), "m" (*__mem));			\
+			: "0" (__val), "R" (*__mem));			\
 		if (irq)						\
 			local_irq_restore(__flags);			\
 	} else								\
@@ -355,12 +359,16 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem)	\
 			local_irq_save(__flags);			\
 		__asm__ __volatile__(					\
 			".set	mips3"		"\t\t# __readq"	"\n\t"	\
+			".set	push"				"\n\t"	\
+			".set	noreorder"			"\n\t"	\
+			".set	nomacro"			"\n\t"	\
 			"ld	%L0, %1"			"\n\t"	\
+			".set	pop"				"\n\t"	\
 			"dsra32	%M0, %L0, 0"			"\n\t"	\
 			"sll	%L0, %L0, 0"			"\n\t"	\
 			".set	mips0"				"\n"	\
 			: "=r" (__val)					\
-			: "m" (*__mem));				\
+			: "R" (*__mem));				\
 		if (irq)						\
 			local_irq_restore(__flags);			\
 	} else {							\
diff --git a/arch/mips/include/asm/ioctls.h b/arch/mips/include/asm/ioctls.h
index d87cb046569..d967b899762 100644
--- a/arch/mips/include/asm/ioctls.h
+++ b/arch/mips/include/asm/ioctls.h
@@ -83,6 +83,7 @@
 #define TCSETSF2	_IOW('T', 0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T', 0x36, int)  /* Generate signal on Pty slave */
 
 /* I hope the range from 0x5480 on is free ... */
diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h
index 7919d76186b..07d3fadb244 100644
--- a/arch/mips/include/asm/mach-ar7/ar7.h
+++ b/arch/mips/include/asm/mach-ar7/ar7.h
@@ -201,7 +201,6 @@ static inline void ar7_device_off(u32 bit)
 }
 
 int __init ar7_gpio_init(void);
-
-int __init ar7_gpio_init(void);
+void __init ar7_init_clocks(void);
 
 #endif /* __AR7_H__ */
diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h
index c58ebd8bc15..9759588ba3c 100644
--- a/arch/mips/include/asm/mach-bcm47xx/nvram.h
+++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h
@@ -12,6 +12,7 @@
 #define __NVRAM_H
 
 #include <linux/types.h>
+#include <linux/kernel.h>
 
 struct nvram_header {
 	u32 magic;
@@ -36,4 +37,10 @@ struct nvram_header {
 
 extern int nvram_getenv(char *name, char *val, size_t val_len);
 
+static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
+{
+	sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
+	       &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
+}
+
 #endif
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 5742bb4d78f..5c0a3575877 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -5,7 +5,7 @@
  *
  * Copyright (c) 2009 Qi Hardware inc.,
  * Author: Xiangfu Liu <xiangfu@qi-hardware.com>
- * Copyright 2010, Lars-Petrer Clausen <lars@metafoo.de>
+ * Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 or later
@@ -235,7 +235,7 @@ static const unsigned int qi_lb60_keypad_rows[] = {
 	QI_LB60_GPIO_KEYIN(3),
 	QI_LB60_GPIO_KEYIN(4),
 	QI_LB60_GPIO_KEYIN(5),
-	QI_LB60_GPIO_KEYIN(7),
+	QI_LB60_GPIO_KEYIN(6),
 	QI_LB60_GPIO_KEYIN8,
 };
 
diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c
index 95bc2b5b14f..1cc9e544d16 100644
--- a/arch/mips/jz4740/platform.c
+++ b/arch/mips/jz4740/platform.c
@@ -208,7 +208,7 @@ struct platform_device jz4740_i2s_device = {
 
 /* PCM */
 struct platform_device jz4740_pcm_device = {
-	.name		= "jz4740-pcm",
+	.name		= "jz4740-pcm-audio",
 	.id		= -1,
 };
 
diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c
index cfeac15eb2e..4a70407f55b 100644
--- a/arch/mips/jz4740/prom.c
+++ b/arch/mips/jz4740/prom.c
@@ -23,7 +23,7 @@
 #include <asm/bootinfo.h>
 #include <asm/mach-jz4740/base.h>
 
-void jz4740_init_cmdline(int argc, char *argv[])
+static __init void jz4740_init_cmdline(int argc, char *argv[])
 {
 	unsigned int count = COMMAND_LINE_SIZE - 1;
 	int i;
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index 2f4d7a99bcc..98c5a9737c1 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -32,7 +32,7 @@ static int mips_next_event(unsigned long delta,
 	cnt = read_c0_count();
 	cnt += delta;
 	write_c0_compare(cnt);
-	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+	res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
 	return res;
 }
 
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 71620e19827..68dae7b6b5d 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -905,7 +905,8 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
 	switch (c->processor_id & 0xff00) {
-	case PRID_IMP_BMIPS32:
+	case PRID_IMP_BMIPS32_REV4:
+	case PRID_IMP_BMIPS32_REV8:
 		c->cputype = CPU_BMIPS32;
 		__cpu_name[cpu] = "Broadcom BMIPS32";
 		break;
@@ -933,10 +934,6 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 		__cpu_name[cpu] = "Broadcom BMIPS5000";
 		c->options |= MIPS_CPU_ULRI;
 		break;
-	case PRID_IMP_BMIPS4KC:
-		c->cputype = CPU_4KC;
-		__cpu_name[cpu] = "MIPS 4Kc";
-		break;
 	}
 }
 
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 6343b4a5b83..876a75cc376 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -251,14 +251,15 @@ SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz,
 
 SYSCALL_DEFINE1(32_personality, unsigned long, personality)
 {
+	unsigned int p = personality & 0xffffffff;
 	int ret;
-	personality &= 0xffffffff;
+
 	if (personality(current->personality) == PER_LINUX32 &&
-	    personality == PER_LINUX)
-		personality = PER_LINUX32;
-	ret = sys_personality(personality);
-	if (ret == PER_LINUX32)
-		ret = PER_LINUX;
+	    personality(p) == PER_LINUX)
+		p = (p & ~PER_MASK) | PER_LINUX32;
+	ret = sys_personality(p);
+	if (ret != -1 && personality(ret) == PER_LINUX32)
+		ret = (ret & ~PER_MASK) | PER_LINUX;
 	return ret;
 }
 
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 5c7c6fc0756..183e0d22666 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -1047,6 +1047,6 @@ init_hw_perf_events(void)
 
 	return 0;
 }
-arch_initcall(init_hw_perf_events);
+early_initcall(init_hw_perf_events);
 
 #endif /* defined(CONFIG_CPU_MIPS32)... */
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 99960940d4a..ae167df73dd 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -142,7 +142,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	childregs->regs[7] = 0;	/* Clear error flag */
 
 	childregs->regs[2] = 0;	/* Child gets zero as return value */
-	regs->regs[2] = p->pid;
 
 	if (childregs->cp0_status & ST0_CU0) {
 		childregs->regs[28] = (unsigned long) ti;
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index e000b278f02..9dbe5836895 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -100,7 +100,7 @@ void __init device_tree_init(void)
 		return;
 
 	base = virt_to_phys((void *)initial_boot_params);
-	size = initial_boot_params->totalsize;
+	size = be32_to_cpu(initial_boot_params->totalsize);
 
 	/* Before we do anything, lets reserve the dt blob */
 	reserve_mem_mach(base, size);
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c
index 43e7cdc5ded..c0e81418ba2 100644
--- a/arch/mips/kernel/smp-mt.c
+++ b/arch/mips/kernel/smp-mt.c
@@ -153,7 +153,7 @@ static void __cpuinit vsmp_init_secondary(void)
 {
 	extern int gic_present;
 
-	/* This is Malta specific: IPI,performance and timer inetrrupts */
+	/* This is Malta specific: IPI,performance and timer interrupts */
 	if (gic_present)
 		change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
 					 STATUSF_IP6 | STATUSF_IP7);
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 8e9fbe75894..e9710430254 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -83,7 +83,8 @@ extern asmlinkage void handle_mcheck(void);
 extern asmlinkage void handle_reserved(void);
 
 extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
-	struct mips_fpu_struct *ctx, int has_fpu);
+				    struct mips_fpu_struct *ctx, int has_fpu,
+				    void *__user *fault_addr);
 
 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
@@ -661,12 +662,36 @@ asmlinkage void do_ov(struct pt_regs *regs)
 	force_sig_info(SIGFPE, &info, current);
 }
 
+static int process_fpemu_return(int sig, void __user *fault_addr)
+{
+	if (sig == SIGSEGV || sig == SIGBUS) {
+		struct siginfo si = {0};
+		si.si_addr = fault_addr;
+		si.si_signo = sig;
+		if (sig == SIGSEGV) {
+			if (find_vma(current->mm, (unsigned long)fault_addr))
+				si.si_code = SEGV_ACCERR;
+			else
+				si.si_code = SEGV_MAPERR;
+		} else {
+			si.si_code = BUS_ADRERR;
+		}
+		force_sig_info(sig, &si, current);
+		return 1;
+	} else if (sig) {
+		force_sig(sig, current);
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
 /*
  * XXX Delayed fp exceptions when doing a lazy ctx switch XXX
  */
 asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
-	siginfo_t info;
+	siginfo_t info = {0};
 
 	if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
 	    == NOTIFY_STOP)
@@ -675,6 +700,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 
 	if (fcr31 & FPU_CSR_UNI_X) {
 		int sig;
+		void __user *fault_addr = NULL;
 
 		/*
 		 * Unimplemented operation exception.  If we've got the full
@@ -690,7 +716,8 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		lose_fpu(1);
 
 		/* Run the emulator */
-		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1);
+		sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
+					       &fault_addr);
 
 		/*
 		 * We can't allow the emulated instruction to leave any of
@@ -702,8 +729,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 		own_fpu(1);	/* Using the FPU again.  */
 
 		/* If something went wrong, signal */
-		if (sig)
-			force_sig(sig, current);
+		process_fpemu_return(sig, fault_addr);
 
 		return;
 	} else if (fcr31 & FPU_CSR_INV_X)
@@ -996,11 +1022,11 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 
 		if (!raw_cpu_has_fpu) {
 			int sig;
+			void __user *fault_addr = NULL;
 			sig = fpu_emulator_cop1Handler(regs,
-						&current->thread.fpu, 0);
-			if (sig)
-				force_sig(sig, current);
-			else
+						       &current->thread.fpu,
+						       0, &fault_addr);
+			if (!process_fpemu_return(sig, fault_addr))
 				mt_ase_fp_affinity();
 		}
 
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 3eb3cde2f66..6a1fdfef8fd 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1092,6 +1092,10 @@ static int vpe_open(struct inode *inode, struct file *filp)
 
 	/* this of-course trashes what was there before... */
 	v->pbuffer = vmalloc(P_SIZE);
+	if (!v->pbuffer) {
+		pr_warning("VPE loader: unable to allocate memory\n");
+		return -ENOMEM;
+	}
 	v->plen = P_SIZE;
 	v->load_addr = NULL;
 	v->len = 0;
@@ -1149,10 +1153,9 @@ static int vpe_release(struct inode *inode, struct file *filp)
 	if (ret < 0)
 		v->shared_ptr = NULL;
 
-	// cleanup any temp buffers
-	if (v->pbuffer)
-		vfree(v->pbuffer);
+	vfree(v->pbuffer);
 	v->plen = 0;
+
 	return ret;
 }
 
@@ -1169,11 +1172,6 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer,
 	if (v == NULL)
 		return -ENODEV;
 
-	if (v->pbuffer == NULL) {
-		printk(KERN_ERR "VPE loader: no buffer for program\n");
-		return -ENOMEM;
-	}
-
 	if ((count + v->len) > v->plen) {
 		printk(KERN_WARNING
 		       "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S
index 77dc3b20110..606c8a9efe3 100644
--- a/arch/mips/lib/memset.S
+++ b/arch/mips/lib/memset.S
@@ -161,16 +161,16 @@ FEXPORT(__bzero)
 
 .Lfwd_fixup:
 	PTR_L		t0, TI_TASK($28)
-	LONG_L		t0, THREAD_BUADDR(t0)
 	andi		a2, 0x3f
+	LONG_L		t0, THREAD_BUADDR(t0)
 	LONG_ADDU	a2, t1
 	jr		ra
 	 LONG_SUBU	a2, t0
 
 .Lpartial_fixup:
 	PTR_L		t0, TI_TASK($28)
-	LONG_L		t0, THREAD_BUADDR(t0)
 	andi		a2, LONGMASK
+	LONG_L		t0, THREAD_BUADDR(t0)
 	LONG_ADDU	a2, t1
 	jr		ra
 	 LONG_SUBU	a2, t0
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index ae4cff97a56..11b193f848f 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -29,9 +29,9 @@ unsigned long memsize, highmemsize;
 
 #define parse_even_earlier(res, option, p)				\
 do {									\
+	int ret;							\
 	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
-			strict_strtol((char *)p + strlen(option"="),	\
-					10, &res);			\
+		ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \
 } while (0)
 
 void __init prom_init_env(void)
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index b2ad1b0910f..d32cb050311 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -64,7 +64,7 @@ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *,
 
 #if __mips >= 4 && __mips != 32
 static int fpux_emu(struct pt_regs *,
-	struct mips_fpu_struct *, mips_instruction);
+	struct mips_fpu_struct *, mips_instruction, void *__user *);
 #endif
 
 /* Further private data for which no space exists in mips_fpu_struct */
@@ -208,16 +208,23 @@ static inline int cop1_64bit(struct pt_regs *xcp)
  * Two instructions if the instruction is in a branch delay slot.
  */
 
-static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
+static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
+		       void *__user *fault_addr)
 {
 	mips_instruction ir;
 	unsigned long emulpc, contpc;
 	unsigned int cond;
 
-	if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+	if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
 		MIPS_FPU_EMU_INC_STATS(errors);
+		*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
 		return SIGBUS;
 	}
+	if (__get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+		MIPS_FPU_EMU_INC_STATS(errors);
+		*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+		return SIGSEGV;
+	}
 
 	/* XXX NEC Vr54xx bug workaround */
 	if ((xcp->cp0_cause & CAUSEF_BD) && !isBranchInstr(&ir))
@@ -245,10 +252,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 #endif
 			return SIGILL;
 		}
-		if (get_user(ir, (mips_instruction __user *) emulpc)) {
+		if (!access_ok(VERIFY_READ, emulpc, sizeof(mips_instruction))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)emulpc;
 			return SIGBUS;
 		}
+		if (__get_user(ir, (mips_instruction __user *) emulpc)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)emulpc;
+			return SIGSEGV;
+		}
 		/* __compute_return_epc() will have updated cp0_epc */
 		contpc = xcp->cp0_epc;
 		/* In order not to confuse ptrace() et al, tweak context */
@@ -269,10 +282,17 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 		u64 val;
 
 		MIPS_FPU_EMU_INC_STATS(loads);
-		if (get_user(val, va)) {
+
+		if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__get_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		DITOREG(val, MIPSInst_RT(ir));
 		break;
 	}
@@ -284,10 +304,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 
 		MIPS_FPU_EMU_INC_STATS(stores);
 		DIFROMREG(val, MIPSInst_RT(ir));
-		if (put_user(val, va)) {
+		if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__put_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		break;
 	}
 
@@ -297,10 +323,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 		u32 val;
 
 		MIPS_FPU_EMU_INC_STATS(loads);
-		if (get_user(val, va)) {
+		if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__get_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		SITOREG(val, MIPSInst_RT(ir));
 		break;
 	}
@@ -312,10 +344,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 
 		MIPS_FPU_EMU_INC_STATS(stores);
 		SIFROMREG(val, MIPSInst_RT(ir));
-		if (put_user(val, va)) {
+		if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
 			return SIGBUS;
 		}
+		if (__put_user(val, va)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = va;
+			return SIGSEGV;
+		}
 		break;
 	}
 
@@ -440,11 +478,18 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 				contpc = (xcp->cp0_epc +
 					(MIPSInst_SIMM(ir) << 2));
 
-				if (get_user(ir,
-				    (mips_instruction __user *) xcp->cp0_epc)) {
+				if (!access_ok(VERIFY_READ, xcp->cp0_epc,
+					       sizeof(mips_instruction))) {
 					MIPS_FPU_EMU_INC_STATS(errors);
+					*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
 					return SIGBUS;
 				}
+				if (__get_user(ir,
+				    (mips_instruction __user *) xcp->cp0_epc)) {
+					MIPS_FPU_EMU_INC_STATS(errors);
+					*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+					return SIGSEGV;
+				}
 
 				switch (MIPSInst_OPCODE(ir)) {
 				case lwc1_op:
@@ -506,9 +551,8 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
 
 #if __mips >= 4 && __mips != 32
 	case cop1x_op:{
-		int sig;
-
-		if ((sig = fpux_emu(xcp, ctx, ir)))
+		int sig = fpux_emu(xcp, ctx, ir, fault_addr);
+		if (sig)
 			return sig;
 		break;
 	}
@@ -604,7 +648,7 @@ DEF3OP(nmadd, dp, ieee754dp_mul, ieee754dp_add, ieee754dp_neg);
 DEF3OP(nmsub, dp, ieee754dp_mul, ieee754dp_sub, ieee754dp_neg);
 
 static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
-	mips_instruction ir)
+	mips_instruction ir, void *__user *fault_addr)
 {
 	unsigned rcsr = 0;	/* resulting csr */
 
@@ -624,10 +668,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 				xcp->regs[MIPSInst_FT(ir)]);
 
 			MIPS_FPU_EMU_INC_STATS(loads);
-			if (get_user(val, va)) {
+			if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (__get_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			SITOREG(val, MIPSInst_FD(ir));
 			break;
 
@@ -638,10 +688,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			MIPS_FPU_EMU_INC_STATS(stores);
 
 			SIFROMREG(val, MIPSInst_FS(ir));
-			if (put_user(val, va)) {
+			if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (put_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			break;
 
 		case madd_s_op:
@@ -701,10 +757,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 				xcp->regs[MIPSInst_FT(ir)]);
 
 			MIPS_FPU_EMU_INC_STATS(loads);
-			if (get_user(val, va)) {
+			if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (__get_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			DITOREG(val, MIPSInst_FD(ir));
 			break;
 
@@ -714,10 +776,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 
 			MIPS_FPU_EMU_INC_STATS(stores);
 			DIFROMREG(val, MIPSInst_FS(ir));
-			if (put_user(val, va)) {
+			if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
 				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
 				return SIGBUS;
 			}
+			if (__put_user(val, va)) {
+				MIPS_FPU_EMU_INC_STATS(errors);
+				*fault_addr = va;
+				return SIGSEGV;
+			}
 			break;
 
 		case madd_d_op:
@@ -1242,7 +1310,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 }
 
 int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
-	int has_fpu)
+	int has_fpu, void *__user *fault_addr)
 {
 	unsigned long oldepc, prevepc;
 	mips_instruction insn;
@@ -1252,10 +1320,16 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 	do {
 		prevepc = xcp->cp0_epc;
 
-		if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+		if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
 			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
 			return SIGBUS;
 		}
+		if (__get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+			MIPS_FPU_EMU_INC_STATS(errors);
+			*fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+			return SIGSEGV;
+		}
 		if (insn == 0)
 			xcp->cp0_epc += 4;	/* skip nops */
 		else {
@@ -1267,7 +1341,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
 			 */
 			/* convert to ieee library modes */
 			ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
-			sig = cop1Emulate(xcp, ctx);
+			sig = cop1Emulate(xcp, ctx, fault_addr);
 			/* revert to mips rounding mode */
 			ieee754_csr.rm = mips_rm[ieee754_csr.rm];
 		}
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 4fc1a0fbe00..21ea14efb83 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -288,7 +288,7 @@ int mips_dma_supported(struct device *dev, u64 mask)
 	return plat_dma_supported(dev, mask);
 }
 
-void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 			 enum dma_data_direction direction)
 {
 	BUG_ON(direction == DMA_NONE);
@@ -298,6 +298,8 @@ void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		__dma_sync((unsigned long)vaddr, size, direction);
 }
 
+EXPORT_SYMBOL(dma_cache_sync);
+
 static struct dma_map_ops mips_default_dma_map_ops = {
 	.alloc_coherent = mips_dma_alloc_coherent,
 	.free_coherent = mips_dma_free_coherent,
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index 505fecad468..9cca8de0054 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -68,6 +68,9 @@ static struct bcache_ops mips_sc_ops = {
  */
 static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 {
+	unsigned int config2 = read_c0_config2();
+	unsigned int tmp;
+
 	/* Check the bypass bit (L2B) */
 	switch (c->cputype) {
 	case CPU_34K:
@@ -83,6 +86,7 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 		c->scache.linesz = 2 << tmp;
 	else
 		return 0;
+	return 1;
 }
 
 static inline int __init mips_sc_probe(void)
diff --git a/arch/mips/pmc-sierra/yosemite/py-console.c b/arch/mips/pmc-sierra/yosemite/py-console.c
index b7f1d9c4a8a..434d7b1a8c6 100644
--- a/arch/mips/pmc-sierra/yosemite/py-console.c
+++ b/arch/mips/pmc-sierra/yosemite/py-console.c
@@ -65,11 +65,15 @@ static unsigned char readb_outer_space(unsigned long long phys)
 
 	__asm__ __volatile__ (
 	"	.set	mips3		\n"
+	"	.set	push		\n"
+	"	.set	noreorder	\n"
+	"	.set	nomacro		\n"
 	"	ld	%0, %1		\n"
+	"	.set	pop		\n"
 	"	lbu	%0, (%0)	\n"
 	"	.set	mips0		\n"
 	: "=r" (res)
-	: "m" (vaddr));
+	: "R" (vaddr));
 
 	write_c0_status(sr);
 	ssnop_4();
@@ -89,11 +93,15 @@ static void writeb_outer_space(unsigned long long phys, unsigned char c)
 
 	__asm__ __volatile__ (
 	"	.set	mips3		\n"
+	"	.set	push		\n"
+	"	.set	noreorder	\n"
+	"	.set	nomacro		\n"
 	"	ld	%0, %1		\n"
+	"	.set	pop		\n"
 	"	sb	%2, (%0)	\n"
 	"	.set	mips0		\n"
 	: "=&r" (tmp)
-	: "m" (vaddr), "r" (c));
+	: "R" (vaddr), "r" (c));
 
 	write_c0_status(sr);
 	ssnop_4();
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index c308989fc46..41707a245de 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -82,7 +82,7 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup)
 enum swarm_rtc_type {
 	RTC_NONE,
 	RTC_XICOR,
-	RTC_M4LT81
+	RTC_M41T81,
 };
 
 enum swarm_rtc_type swarm_rtc_type;
@@ -96,7 +96,7 @@ void read_persistent_clock(struct timespec *ts)
 		sec = xicor_get_time();
 		break;
 
-	case RTC_M4LT81:
+	case RTC_M41T81:
 		sec = m41t81_get_time();
 		break;
 
@@ -115,7 +115,7 @@ int rtc_mips_set_time(unsigned long sec)
 	case RTC_XICOR:
 		return xicor_set_time(sec);
 
-	case RTC_M4LT81:
+	case RTC_M41T81:
 		return m41t81_set_time(sec);
 
 	case RTC_NONE:
@@ -141,7 +141,7 @@ void __init plat_mem_setup(void)
 	if (xicor_probe())
 		swarm_rtc_type = RTC_XICOR;
 	if (m41t81_probe())
-		swarm_rtc_type = RTC_M4LT81;
+		swarm_rtc_type = RTC_M41T81;
 
 #ifdef CONFIG_VT
 	screen_info = (struct screen_info) {
diff --git a/arch/mn10300/include/asm/syscall.h b/arch/mn10300/include/asm/syscall.h
new file mode 100644
index 00000000000..b44b0bb75a0
--- /dev/null
+++ b/arch/mn10300/include/asm/syscall.h
@@ -0,0 +1,117 @@
+/* Access to user system call parameters and results
+ *
+ * See asm-generic/syscall.h for function descriptions.
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H
+
+#include <linux/sched.h>
+#include <linux/err.h>
+
+extern const unsigned long sys_call_table[];
+
+static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+	return regs->orig_d0;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->d0 = regs->orig_d0;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	unsigned long error = regs->d0;
+	return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->d0;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	regs->d0 = (long) error ?: val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	switch (i) {
+	case 0:
+		if (!n--) break;
+		*args++ = regs->a0;
+	case 1:
+		if (!n--) break;
+		*args++ = regs->d1;
+	case 2:
+		if (!n--) break;
+		*args++ = regs->a3;
+	case 3:
+		if (!n--) break;
+		*args++ = regs->a2;
+	case 4:
+		if (!n--) break;
+		*args++ = regs->d3;
+	case 5:
+		if (!n--) break;
+		*args++ = regs->d2;
+	case 6:
+		if (!n--) break;
+	default:
+		BUG();
+		break;
+	}
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	switch (i) {
+	case 0:
+		if (!n--) break;
+		regs->a0 = *args++;
+	case 1:
+		if (!n--) break;
+		regs->d1 = *args++;
+	case 2:
+		if (!n--) break;
+		regs->a3 = *args++;
+	case 3:
+		if (!n--) break;
+		regs->a2 = *args++;
+	case 4:
+		if (!n--) break;
+		regs->d3 = *args++;
+	case 5:
+		if (!n--) break;
+		regs->d2 = *args++;
+	case 6:
+		if (!n--) break;
+	default:
+		BUG();
+		break;
+	}
+}
+
+#endif /* _ASM_SYSCALL_H */
diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c
index 0d5d63c91dc..f28dc99c6f7 100644
--- a/arch/mn10300/kernel/gdb-io-serial.c
+++ b/arch/mn10300/kernel/gdb-io-serial.c
@@ -73,7 +73,8 @@ void gdbstub_io_init(void)
 	GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
 
 	/* permit level 0 IRQs to take place */
-	local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+	arch_local_change_intr_mask_level(
+		NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
 }
 
 /*
diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c
index 97dfda23342..abdeea153c8 100644
--- a/arch/mn10300/kernel/gdb-io-ttysm.c
+++ b/arch/mn10300/kernel/gdb-io-ttysm.c
@@ -87,7 +87,8 @@ void __init gdbstub_io_init(void)
 	tmp = *gdbstub_port->_control;
 
 	/* permit level 0 IRQs only */
-	local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+	arch_local_change_intr_mask_level(
+		NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
 }
 
 /*
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index a5fc3f05309..b169d99d9f2 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -1194,7 +1194,8 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 
 	asm volatile("mov mdr,%0" : "=d"(mdr));
 	local_save_flags(epsw);
-	local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+	arch_local_change_intr_mask_level(
+		NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
 
 	gdbstub_store_fpu();
 
diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c
index c2e44597c22..ac11754ecec 100644
--- a/arch/mn10300/kernel/irq.c
+++ b/arch/mn10300/kernel/irq.c
@@ -459,7 +459,7 @@ void migrate_irqs(void)
 			tmp = CROSS_GxICR(irq, new);
 
 			x &= GxICR_LEVEL | GxICR_ENABLE;
-			if (GxICR(irq) & GxICR_REQUEST) {
+			if (GxICR(irq) & GxICR_REQUEST)
 				x |= GxICR_REQUEST | GxICR_DETECT;
 			CROSS_GxICR(irq, new) = x;
 			tmp = CROSS_GxICR(irq, new);
diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c
index 0d0f8049a17..e1b14a6ed54 100644
--- a/arch/mn10300/kernel/process.c
+++ b/arch/mn10300/kernel/process.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/stddef.h>
 #include <linux/unistd.h>
 #include <linux/ptrace.h>
diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c
index f860a340acc..75da468090b 100644
--- a/arch/mn10300/kernel/time.c
+++ b/arch/mn10300/kernel/time.c
@@ -40,21 +40,17 @@ unsigned long long sched_clock(void)
 		unsigned long long ll;
 		unsigned l[2];
 	} tsc64, result;
-	unsigned long tsc, tmp;
+	unsigned long tmp;
 	unsigned product[3]; /* 96-bit intermediate value */
 
 	/* cnt32_to_63() is not safe with preemption */
 	preempt_disable();
 
-	/* read the TSC value
-	 */
-	tsc = get_cycles();
-
-	/* expand to 64-bits.
+	/* expand the tsc to 64-bits.
 	 * - sched_clock() must be called once a minute or better or the
 	 *   following will go horribly wrong - see cnt32_to_63()
 	 */
-	tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
+	tsc64.ll = cnt32_to_63(get_cycles()) & 0x7fffffffffffffffULL;
 
 	preempt_enable();
 
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index ba430a03bc7..30394081d9b 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -28,7 +28,6 @@
 #include <linux/namei.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/utsname.h>
 #include <linux/vfs.h>
diff --git a/arch/parisc/include/asm/ioctls.h b/arch/parisc/include/asm/ioctls.h
index 4e0614456be..6ba80d03623 100644
--- a/arch/parisc/include/asm/ioctls.h
+++ b/arch/parisc/include/asm/ioctls.h
@@ -52,6 +52,7 @@
 #define TCSETSF2	_IOW('T',0x2D, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, int)  /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c
index 5024f643b3b..d7d94b845dc 100644
--- a/arch/parisc/kernel/irq.c
+++ b/arch/parisc/kernel/irq.c
@@ -75,9 +75,6 @@ static void cpu_unmask_irq(unsigned int irq)
 	smp_send_all_nop();
 }
 
-void no_ack_irq(unsigned int irq) { }
-void no_end_irq(unsigned int irq) { }
-
 void cpu_ack_irq(unsigned int irq)
 {
 	unsigned long mask = EIEM_MASK(irq);
@@ -241,7 +238,7 @@ int cpu_claim_irq(unsigned int irq, struct irq_chip *type, void *data)
 
 	/* for iosapic interrupts */
 	if (type) {
-		set_irq_chip_and_handler(irq, type, handle_level_irq);
+		set_irq_chip_and_handler(irq, type, handle_percpu_irq);
 		set_irq_chip_data(irq, data);
 		cpu_unmask_irq(irq);
 	}
@@ -392,7 +389,7 @@ static void claim_cpu_irqs(void)
 	int i;
 	for (i = CPU_IRQ_BASE; i <= CPU_IRQ_MAX; i++) {
 		set_irq_chip_and_handler(i, &cpu_interrupt_type,
-			handle_level_irq);
+					 handle_percpu_irq);
 	}
 
 	set_irq_handler(TIMER_IRQ, handle_percpu_irq);
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 66d1f17fdb9..11bdd68e576 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -92,8 +92,6 @@ static int pdc_console_setup(struct console *co, char *options)
 
 static struct timer_list pdc_console_timer;
 
-extern struct console * console_drivers;
-
 static int pdc_console_tty_open(struct tty_struct *tty, struct file *filp)
 {
 
@@ -169,11 +167,13 @@ static int __init pdc_console_tty_driver_init(void)
 	 * It is unregistered if the pdc console was not selected as the
 	 * primary console. */
 
-	struct console *tmp = console_drivers;
+	struct console *tmp;
 
-	for (tmp = console_drivers; tmp; tmp = tmp->next)
+	acquire_console_sem();
+	for_each_console(tmp)
 		if (tmp == &pdc_cons)
 			break;
+	release_console_sem();
 
 	if (!tmp) {
 		printk(KERN_INFO "PDC console driver not registered anymore, not creating %s\n", pdc_cons.name);
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 35c827e94e3..609a331878e 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -98,7 +98,6 @@ void
 sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
 {
 	struct rt_sigframe __user *frame;
-	struct siginfo si;
 	sigset_t set;
 	unsigned long usp = (regs->gr[30] & ~(0x01UL));
 	unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE;
@@ -178,13 +177,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
 
 give_sigsegv:
 	DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n");
-	si.si_signo = SIGSEGV;
-	si.si_errno = 0;
-	si.si_code = SI_KERNEL;
-	si.si_pid = task_pid_vnr(current);
-	si.si_uid = current_uid();
-	si.si_addr = &frame->uc;
-	force_sig_info(SIGSEGV, &si, current);
+	force_sig(SIGSEGV, current);
 	return;
 }
 
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 9779ece2b07..88a0ad14a9c 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -20,7 +20,6 @@
 #include <linux/times.h>
 #include <linux/time.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b6447190e1a..e625e9e034a 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -4,6 +4,10 @@ config PPC32
 	bool
 	default y if !PPC64
 
+config 32BIT
+	bool
+	default y if PPC32
+
 config 64BIT
 	bool
 	default y if PPC64
diff --git a/arch/powerpc/boot/div64.S b/arch/powerpc/boot/div64.S
index 722f360a32a..d271ab54267 100644
--- a/arch/powerpc/boot/div64.S
+++ b/arch/powerpc/boot/div64.S
@@ -33,9 +33,10 @@ __div64_32:
 	cntlzw	r0,r5		# we are shifting the dividend right
 	li	r10,-1		# to make it < 2^32, and shifting
 	srw	r10,r10,r0	# the divisor right the same amount,
-	add	r9,r4,r10	# rounding up (so the estimate cannot
+	addc	r9,r4,r10	# rounding up (so the estimate cannot
 	andc	r11,r6,r10	# ever be too large, only too small)
 	andc	r9,r9,r10
+	addze	r9,r9
 	or	r11,r5,r11
 	rotlw	r9,r9,r0
 	rotlw	r11,r11,r0
diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h
index 851920052e0..c7dc17cf84f 100644
--- a/arch/powerpc/include/asm/ioctls.h
+++ b/arch/powerpc/include/asm/ioctls.h
@@ -94,6 +94,7 @@
 #define TIOCSRS485	0x542f
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	0x5453
diff --git a/arch/powerpc/kernel/e500-pmu.c b/arch/powerpc/kernel/e500-pmu.c
index 7c07de0d894..b150b510510 100644
--- a/arch/powerpc/kernel/e500-pmu.c
+++ b/arch/powerpc/kernel/e500-pmu.c
@@ -126,4 +126,4 @@ static int init_e500_pmu(void)
 	return register_fsl_emb_pmu(&e500_pmu);
 }
 
-arch_initcall(init_e500_pmu);
+early_initcall(init_e500_pmu);
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 7a9db64f3f0..42850ee00ad 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -337,7 +337,7 @@ char *dbg_get_reg(int regno, void *mem, struct pt_regs *regs)
 		/* FP registers 32 -> 63 */
 #if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_SPE)
 		if (current)
-			memcpy(mem, current->thread.evr[regno-32],
+			memcpy(mem, &current->thread.evr[regno-32],
 					dbg_reg_def[regno].size);
 #else
 		/* fp registers not used by kernel, leave zero */
@@ -362,7 +362,7 @@ int dbg_set_reg(int regno, void *mem, struct pt_regs *regs)
 	if (regno >= 32 && regno < 64) {
 		/* FP registers 32 -> 63 */
 #if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_SPE)
-		memcpy(current->thread.evr[regno-32], mem,
+		memcpy(&current->thread.evr[regno-32], mem,
 				dbg_reg_def[regno].size);
 #else
 		/* fp registers not used by kernel, leave zero */
diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/kernel/mpc7450-pmu.c
index 09d72028f31..2cc5e0301d0 100644
--- a/arch/powerpc/kernel/mpc7450-pmu.c
+++ b/arch/powerpc/kernel/mpc7450-pmu.c
@@ -414,4 +414,4 @@ static int init_mpc7450_pmu(void)
 	return register_power_pmu(&mpc7450_pmu);
 }
 
-arch_initcall(init_mpc7450_pmu);
+early_initcall(init_mpc7450_pmu);
diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c
index 3129c855933..56748070578 100644
--- a/arch/powerpc/kernel/perf_event.c
+++ b/arch/powerpc/kernel/perf_event.c
@@ -1379,7 +1379,7 @@ int register_power_pmu(struct power_pmu *pmu)
 		freeze_events_kernel = MMCR0_FCHV;
 #endif /* CONFIG_PPC64 */
 
-	perf_pmu_register(&power_pmu);
+	perf_pmu_register(&power_pmu, "cpu", PERF_TYPE_RAW);
 	perf_cpu_notifier(power_pmu_notifier);
 
 	return 0;
diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c
index 7ecca59ddf7..4dcf5f831e9 100644
--- a/arch/powerpc/kernel/perf_event_fsl_emb.c
+++ b/arch/powerpc/kernel/perf_event_fsl_emb.c
@@ -681,7 +681,7 @@ int register_fsl_emb_pmu(struct fsl_emb_pmu *pmu)
 	pr_info("%s performance monitor hardware support registered\n",
 		pmu->name);
 
-	perf_pmu_register(&fsl_emb_pmu);
+	perf_pmu_register(&fsl_emb_pmu, "cpu", PERF_TYPE_RAW);
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/kernel/power4-pmu.c
index 2a361cdda63..ead8b3c2649 100644
--- a/arch/powerpc/kernel/power4-pmu.c
+++ b/arch/powerpc/kernel/power4-pmu.c
@@ -613,4 +613,4 @@ static int init_power4_pmu(void)
 	return register_power_pmu(&power4_pmu);
 }
 
-arch_initcall(init_power4_pmu);
+early_initcall(init_power4_pmu);
diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/kernel/power5+-pmu.c
index 199de527d41..eca0ac595cb 100644
--- a/arch/powerpc/kernel/power5+-pmu.c
+++ b/arch/powerpc/kernel/power5+-pmu.c
@@ -682,4 +682,4 @@ static int init_power5p_pmu(void)
 	return register_power_pmu(&power5p_pmu);
 }
 
-arch_initcall(init_power5p_pmu);
+early_initcall(init_power5p_pmu);
diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/kernel/power5-pmu.c
index 98b6a729a9d..d5ff0f64a5e 100644
--- a/arch/powerpc/kernel/power5-pmu.c
+++ b/arch/powerpc/kernel/power5-pmu.c
@@ -621,4 +621,4 @@ static int init_power5_pmu(void)
 	return register_power_pmu(&power5_pmu);
 }
 
-arch_initcall(init_power5_pmu);
+early_initcall(init_power5_pmu);
diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/kernel/power6-pmu.c
index 84a607bda8f..31603927e37 100644
--- a/arch/powerpc/kernel/power6-pmu.c
+++ b/arch/powerpc/kernel/power6-pmu.c
@@ -544,4 +544,4 @@ static int init_power6_pmu(void)
 	return register_power_pmu(&power6_pmu);
 }
 
-arch_initcall(init_power6_pmu);
+early_initcall(init_power6_pmu);
diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/kernel/power7-pmu.c
index 852f7b7f6b4..593740fcb79 100644
--- a/arch/powerpc/kernel/power7-pmu.c
+++ b/arch/powerpc/kernel/power7-pmu.c
@@ -369,4 +369,4 @@ static int init_power7_pmu(void)
 	return register_power_pmu(&power7_pmu);
 }
 
-arch_initcall(init_power7_pmu);
+early_initcall(init_power7_pmu);
diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/kernel/ppc970-pmu.c
index 3fee685de4d..9a6e093858f 100644
--- a/arch/powerpc/kernel/ppc970-pmu.c
+++ b/arch/powerpc/kernel/ppc970-pmu.c
@@ -494,4 +494,4 @@ static int init_ppc970_pmu(void)
 	return register_power_pmu(&ppc970_pmu);
 }
 
-arch_initcall(init_ppc970_pmu);
+early_initcall(init_ppc970_pmu);
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 2a178b0ebcd..ce6f61c6f87 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -497,9 +497,8 @@ static void __init emergency_stack_init(void)
 }
 
 /*
- * Called into from start_kernel, after lock_kernel has been called.
- * Initializes bootmem, which is unsed to manage page allocation until
- * mem_init is called.
+ * Called into from start_kernel this initializes bootmem, which is used
+ * to manage page allocation until mem_init is called.
  */
 void __init setup_arch(char **cmdline_p)
 {
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index b1b6043a56c..4e5bf1edc0f 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -23,7 +23,6 @@
 #include <linux/resource.h>
 #include <linux/times.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 83f534d862d..5e9584405c4 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -1123,7 +1123,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	else
 #endif /* CONFIG_PPC_HAS_HASH_64K */
 		rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
-				    subpage_protection(pgdir, ea));
+				    subpage_protection(mm, ea));
 
 	/* Dump some info in case of hash insertion failure, they should
 	 * never happen so it is really useful to know if/when they do
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 2c7e801ab20..6a3997f98df 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -92,7 +92,7 @@ static void pte_free_rcu_callback(struct rcu_head *head)
 
 static void pte_free_submit(struct pte_freelist_batch *batch)
 {
-	call_rcu(&batch->rcu, pte_free_rcu_callback);
+	call_rcu_sched(&batch->rcu, pte_free_rcu_callback);
 }
 
 void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index 8b04c54e596..8526bd9d2aa 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -138,8 +138,11 @@
 	cmpldi	cr0,r15,0			/* Check for user region */
 	std	r14,EX_TLB_ESR(r12)		/* write crazy -1 to frame */
 	beq	normal_tlb_miss
+
+	li	r11,_PAGE_PRESENT|_PAGE_BAP_SX	/* Base perm */
+	oris	r11,r11,_PAGE_ACCESSED@h
 	/* XXX replace the RMW cycles with immediate loads + writes */
-1:	mfspr	r10,SPRN_MAS1
+	mfspr	r10,SPRN_MAS1
 	cmpldi	cr0,r15,8			/* Check for vmalloc region */
 	rlwinm	r10,r10,0,16,1			/* Clear TID */
 	mtspr	SPRN_MAS1,r10
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 36c0c449a89..2a030d89bbc 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -585,6 +585,6 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	ppc64_rma_size = min_t(u64, first_memblock_size, 0x40000000);
 
 	/* Finally limit subsequent allocations */
-	memblock_set_current_limit(ppc64_memblock_base + ppc64_rma_size);
+	memblock_set_current_limit(first_memblock_base + ppc64_rma_size);
 }
 #endif /* CONFIG_PPC64 */
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
index fea833e18ad..e0d703c7fdf 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c
@@ -63,6 +63,7 @@
 #include <linux/of_gpio.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
+#include <linux/fs.h>
 #include <linux/watchdog.h>
 #include <linux/miscdevice.h>
 #include <linux/uaccess.h>
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 3532b92de98..856e9c39806 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -71,12 +71,18 @@ spufs_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void
-spufs_destroy_inode(struct inode *inode)
+static void spufs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(spufs_inode_cache, SPUFS_I(inode));
 }
 
+static void spufs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, spufs_i_callback);
+}
+
 static void
 spufs_init_once(void *p)
 {
@@ -159,18 +165,18 @@ static void spufs_prune_dir(struct dentry *dir)
 
 	mutex_lock(&dir->d_inode->i_mutex);
 	list_for_each_entry_safe(dentry, tmp, &dir->d_subdirs, d_u.d_child) {
-		spin_lock(&dcache_lock);
 		spin_lock(&dentry->d_lock);
 		if (!(d_unhashed(dentry)) && dentry->d_inode) {
-			dget_locked(dentry);
+			dget_dlock(dentry);
 			__d_drop(dentry);
 			spin_unlock(&dentry->d_lock);
 			simple_unlink(dir->d_inode, dentry);
-			spin_unlock(&dcache_lock);
+			/* XXX: what was dcache_lock protecting here? Other
+			 * filesystems (IB, configfs) release dcache_lock
+			 * before unlink */
 			dput(dentry);
 		} else {
 			spin_unlock(&dentry->d_lock);
-			spin_unlock(&dcache_lock);
 		}
 	}
 	shrink_dcache_parent(dir);
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index c667f0f02c3..3139814f643 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -47,6 +47,12 @@ config LPARCFG
 config PPC_PSERIES_DEBUG
 	depends on PPC_PSERIES && PPC_EARLY_DEBUG
 	bool "Enable extra debug logging in platforms/pseries"
+        help
+	  Say Y here if you want the pseries core to produce a bunch of
+	  debug messages to the system log. Select this if you are having a
+	  problem with the pseries core and want to see more of what is
+	  going on. This does not enable debugging in lpar.c, which must
+	  be manually done due to its verbosity.
 	default y
 
 config PPC_SMLPAR
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 34b7dc12e73..17a11c82e6f 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -21,8 +21,6 @@
  * Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com>
  */
 
-#undef DEBUG
-
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/list.h>
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 4b7a062dee1..5fcc92a12d3 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -25,8 +25,6 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#undef DEBUG
-
 #include <linux/pci.h>
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index e0b98e71ff4..ff19efdf6fe 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -1,13 +1,8 @@
-config SCHED_MC
-	def_bool y
-	depends on SMP
-
 config MMU
 	def_bool y
 
 config ZONE_DMA
-	def_bool y
-	depends on 64BIT
+	def_bool y if 64BIT
 
 config LOCKDEP_SUPPORT
 	def_bool y
@@ -25,12 +20,10 @@ config RWSEM_XCHGADD_ALGORITHM
 	def_bool y
 
 config ARCH_HAS_ILOG2_U32
-	bool
-	default n
+	def_bool n
 
 config ARCH_HAS_ILOG2_U64
-	bool
-	default n
+	def_bool n
 
 config GENERIC_HWEIGHT
 	def_bool y
@@ -42,9 +35,7 @@ config GENERIC_CLOCKEVENTS
 	def_bool y
 
 config GENERIC_BUG
-	bool
-	depends on BUG
-	default y
+	def_bool y if BUG
 
 config GENERIC_BUG_RELATIVE_POINTERS
 	def_bool y
@@ -59,13 +50,10 @@ config ARCH_DMA_ADDR_T_64BIT
 	def_bool 64BIT
 
 config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
+	def_bool y if SMP && PREEMPT
 
 config PGSTE
-	bool
-	default y if KVM
+	def_bool y if KVM
 
 config VIRT_CPU_ACCOUNTING
 	def_bool y
@@ -85,7 +73,6 @@ config S390
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_DEFAULT_NO_SPIN_MUTEXES
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
@@ -99,6 +86,7 @@ config S390
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
 	select HAVE_GET_USER_PAGES_FAST
+	select HAVE_ARCH_MUTEX_CPU_RELAX
 	select ARCH_INLINE_SPIN_TRYLOCK
 	select ARCH_INLINE_SPIN_TRYLOCK_BH
 	select ARCH_INLINE_SPIN_LOCK
@@ -129,8 +117,7 @@ config S390
 	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
 
 config SCHED_OMIT_FRAME_POINTER
-	bool
-	default y
+	def_bool y
 
 source "init/Kconfig"
 
@@ -143,20 +130,21 @@ comment "Processor type and features"
 source "kernel/time/Kconfig"
 
 config 64BIT
-	bool "64 bit kernel"
+	def_bool y
+	prompt "64 bit kernel"
 	help
 	  Select this option if you have an IBM z/Architecture machine
 	  and want to use the 64 bit addressing mode.
 
 config 32BIT
-	bool
-	default y if !64BIT
+	def_bool y if !64BIT
 
 config KTIME_SCALAR
 	def_bool 32BIT
 
 config SMP
-	bool "Symmetric multi-processing support"
+	def_bool y
+	prompt "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -188,10 +176,10 @@ config NR_CPUS
 	  approximately sixteen kilobytes to the kernel image.
 
 config HOTPLUG_CPU
-	bool "Support for hot-pluggable CPUs"
+	def_bool y
+	prompt "Support for hot-pluggable CPUs"
 	depends on SMP
 	select HOTPLUG
-	default n
 	help
 	  Say Y here to be able to turn CPUs off and on. CPUs
 	  can be controlled through /sys/devices/system/cpu/cpu#.
@@ -207,14 +195,16 @@ config SCHED_MC
 	  increased overhead in some places.
 
 config SCHED_BOOK
-	bool "Book scheduler support"
+	def_bool y
+	prompt "Book scheduler support"
 	depends on SMP && SCHED_MC
 	help
 	  Book scheduler support improves the CPU scheduler's decision making
 	  when dealing with machines that have several books.
 
 config MATHEMU
-	bool "IEEE FPU emulation"
+	def_bool y
+	prompt "IEEE FPU emulation"
 	depends on MARCH_G5
 	help
 	  This option is required for IEEE compliant floating point arithmetic
@@ -222,7 +212,8 @@ config MATHEMU
 	  need this.
 
 config COMPAT
-	bool "Kernel support for 31 bit emulation"
+	def_bool y
+	prompt "Kernel support for 31 bit emulation"
 	depends on 64BIT
 	select COMPAT_BINFMT_ELF
 	help
@@ -232,16 +223,14 @@ config COMPAT
 	  executing 31 bit applications.  It is safe to say "Y".
 
 config SYSVIPC_COMPAT
-	bool
-	depends on COMPAT && SYSVIPC
-	default y
+	def_bool y if COMPAT && SYSVIPC
 
 config AUDIT_ARCH
-	bool
-	default y
+	def_bool y
 
 config S390_EXEC_PROTECT
-	bool "Data execute protection"
+	def_bool y
+	prompt "Data execute protection"
 	help
 	  This option allows to enable a buffer overflow protection for user
 	  space programs and it also selects the addressing mode option above.
@@ -301,7 +290,8 @@ config MARCH_Z196
 endchoice
 
 config PACK_STACK
-	bool "Pack kernel stack"
+	def_bool y
+	prompt "Pack kernel stack"
 	help
 	  This option enables the compiler option -mkernel-backchain if it
 	  is available. If the option is available the compiler supports
@@ -314,7 +304,8 @@ config PACK_STACK
 	  Say Y if you are unsure.
 
 config SMALL_STACK
-	bool "Use 8kb for kernel stack instead of 16kb"
+	def_bool n
+	prompt "Use 8kb for kernel stack instead of 16kb"
 	depends on PACK_STACK && 64BIT && !LOCKDEP
 	help
 	  If you say Y here and the compiler supports the -mkernel-backchain
@@ -326,7 +317,8 @@ config SMALL_STACK
 	  Say N if you are unsure.
 
 config CHECK_STACK
-	bool "Detect kernel stack overflow"
+	def_bool y
+	prompt "Detect kernel stack overflow"
 	help
 	  This option enables the compiler option -mstack-guard and
 	  -mstack-size if they are available. If the compiler supports them
@@ -350,7 +342,8 @@ config STACK_GUARD
 	  512 for 64 bit.
 
 config WARN_STACK
-	bool "Emit compiler warnings for function with broken stack usage"
+	def_bool n
+	prompt "Emit compiler warnings for function with broken stack usage"
 	help
 	  This option enables the compiler options -mwarn-framesize and
 	  -mwarn-dynamicstack. If the compiler supports these options it
@@ -385,24 +378,24 @@ config ARCH_SPARSEMEM_DEFAULT
 	def_bool y
 
 config ARCH_SELECT_MEMORY_MODEL
-       def_bool y
+	def_bool y
 
 config ARCH_ENABLE_MEMORY_HOTPLUG
-	def_bool y
-	depends on SPARSEMEM
+	def_bool y if SPARSEMEM
 
 config ARCH_ENABLE_MEMORY_HOTREMOVE
 	def_bool y
 
 config ARCH_HIBERNATION_POSSIBLE
-       def_bool y if 64BIT
+	def_bool y if 64BIT
 
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
 
 config QDIO
-	tristate "QDIO support"
+	def_tristate y
+	prompt "QDIO support"
 	---help---
 	  This driver provides the Queued Direct I/O base support for
 	  IBM System z.
@@ -413,7 +406,8 @@ config QDIO
 	  If unsure, say Y.
 
 config CHSC_SCH
-	tristate "Support for CHSC subchannels"
+	def_tristate y
+	prompt "Support for CHSC subchannels"
 	help
 	  This driver allows usage of CHSC subchannels. A CHSC subchannel
 	  is usually present on LPAR only.
@@ -431,7 +425,8 @@ config CHSC_SCH
 comment "Misc"
 
 config IPL
-	bool "Builtin IPL record support"
+	def_bool y
+	prompt "Builtin IPL record support"
 	help
 	  If you want to use the produced kernel to IPL directly from a
 	  device, you have to merge a bootsector specific to the device
@@ -463,7 +458,8 @@ config FORCE_MAX_ZONEORDER
 	default "9"
 
 config PFAULT
-	bool "Pseudo page fault support"
+	def_bool y
+	prompt "Pseudo page fault support"
 	help
 	  Select this option, if you want to use PFAULT pseudo page fault
 	  handling under VM. If running native or in LPAR, this option
@@ -475,7 +471,8 @@ config PFAULT
 	  this option.
 
 config SHARED_KERNEL
-	bool "VM shared kernel support"
+	def_bool y
+	prompt "VM shared kernel support"
 	help
 	  Select this option, if you want to share the text segment of the
 	  Linux kernel between different VM guests. This reduces memory
@@ -486,7 +483,8 @@ config SHARED_KERNEL
 	  doing and want to exploit this feature.
 
 config CMM
-	tristate "Cooperative memory management"
+	def_tristate n
+	prompt "Cooperative memory management"
 	help
 	  Select this option, if you want to enable the kernel interface
 	  to reduce the memory size of the system. This is accomplished
@@ -498,14 +496,16 @@ config CMM
 	  option.
 
 config CMM_IUCV
-	bool "IUCV special message interface to cooperative memory management"
+	def_bool y
+	prompt "IUCV special message interface to cooperative memory management"
 	depends on CMM && (SMSGIUCV=y || CMM=SMSGIUCV)
 	help
 	  Select this option to enable the special message interface to
 	  the cooperative memory management.
 
 config APPLDATA_BASE
-	bool "Linux - VM Monitor Stream, base infrastructure"
+	def_bool n
+	prompt "Linux - VM Monitor Stream, base infrastructure"
 	depends on PROC_FS
 	help
 	  This provides a kernel interface for creating and updating z/VM APPLDATA
@@ -520,7 +520,8 @@ config APPLDATA_BASE
 	  The /proc entries can also be read from, showing the current settings.
 
 config APPLDATA_MEM
-	tristate "Monitor memory management statistics"
+	def_tristate m
+	prompt "Monitor memory management statistics"
 	depends on APPLDATA_BASE && VM_EVENT_COUNTERS
 	help
 	  This provides memory management related data to the Linux - VM Monitor
@@ -536,7 +537,8 @@ config APPLDATA_MEM
 	  appldata_mem.o.
 
 config APPLDATA_OS
-	tristate "Monitor OS statistics"
+	def_tristate m
+	prompt "Monitor OS statistics"
 	depends on APPLDATA_BASE
 	help
 	  This provides OS related data to the Linux - VM Monitor Stream, like
@@ -550,7 +552,8 @@ config APPLDATA_OS
 	  appldata_os.o.
 
 config APPLDATA_NET_SUM
-	tristate "Monitor overall network statistics"
+	def_tristate m
+	prompt "Monitor overall network statistics"
 	depends on APPLDATA_BASE && NET
 	help
 	  This provides network related data to the Linux - VM Monitor Stream,
@@ -567,30 +570,32 @@ config APPLDATA_NET_SUM
 source kernel/Kconfig.hz
 
 config S390_HYPFS_FS
-	bool "s390 hypervisor file system support"
+	def_bool y
+	prompt "s390 hypervisor file system support"
 	select SYS_HYPERVISOR
-	default y
 	help
 	  This is a virtual file system intended to provide accounting
 	  information in an s390 hypervisor environment.
 
 config KEXEC
-	bool "kexec system call"
+	def_bool n
+	prompt "kexec system call"
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
 	  but is independent of hardware/microcode support.
 
 config ZFCPDUMP
-	bool "zfcpdump support"
+	def_bool n
+	prompt "zfcpdump support"
 	select SMP
-	default n
 	help
 	  Select this option if you want to build an zfcpdump enabled kernel.
 	  Refer to <file:Documentation/s390/zfcpdump.txt> for more details on this.
 
 config S390_GUEST
-bool "s390 guest support for KVM (EXPERIMENTAL)"
+	def_bool y
+	prompt "s390 guest support for KVM (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
 	select VIRTIO
 	select VIRTIO_RING
@@ -602,9 +607,9 @@ bool "s390 guest support for KVM (EXPERIMENTAL)"
 	  the default console.
 
 config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
+	def_bool y
+	prompt "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
-	default y
 	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their
diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug
index 45e0c6199f3..2b380df9560 100644
--- a/arch/s390/Kconfig.debug
+++ b/arch/s390/Kconfig.debug
@@ -1,13 +1,25 @@
 menu "Kernel hacking"
 
 config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default y
+	def_bool y
 
 source "lib/Kconfig.debug"
 
+config STRICT_DEVMEM
+	def_bool y
+	prompt "Filter access to /dev/mem"
+	---help---
+	  This option restricts access to /dev/mem.  If this option is
+	  disabled, you allow userspace access to all memory, including
+	  kernel and userspace memory. Accidental memory access is likely
+	  to be disastrous.
+	  Memory access is required for experts who want to debug the kernel.
+
+	  If you are unsure, say Y.
+
 config DEBUG_STRICT_USER_COPY_CHECKS
-	bool "Strict user copy size checks"
+	def_bool n
+	prompt "Strict user copy size checks"
 	---help---
 	  Enabling this option turns a certain set of sanity checks for user
 	  copy operations into compile time warnings.
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index e40ac6ee652..d79697157ac 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -2,16 +2,12 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
+CONFIG_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_NS=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_COMPAT_BRK is not set
+CONFIG_PERF_EVENTS=y
 CONFIG_SLAB=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
@@ -20,24 +16,12 @@ CONFIG_MODVERSIONS=y
 CONFIG_DEFAULT_DEADLINE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_64BIT=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=32
-CONFIG_COMPAT=y
-CONFIG_S390_EXEC_PROTECT=y
-CONFIG_PACK_STACK=y
-CONFIG_CHECK_STACK=y
 CONFIG_PREEMPT=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_QDIO=y
-CONFIG_CHSC_SCH=m
-CONFIG_IPL=y
 CONFIG_BINFMT_MISC=m
-CONFIG_PFAULT=y
 CONFIG_HZ_100=y
 CONFIG_KEXEC=y
-CONFIG_S390_GUEST=y
 CONFIG_PM=y
 CONFIG_HIBERNATION=y
 CONFIG_PACKET=y
@@ -46,16 +30,15 @@ CONFIG_NET_KEY=y
 CONFIG_AFIUCV=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
+# CONFIG_INET_LRO is not set
 CONFIG_IPV6=y
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_PROTO_SCTP is not set
+CONFIG_NET_SCTPPROBE=m
+CONFIG_L2TP=m
+CONFIG_L2TP_DEBUGFS=m
+CONFIG_VLAN_8021Q=y
 CONFIG_NET_SCHED=y
 CONFIG_NET_SCH_CBQ=m
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=y
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -69,28 +52,14 @@ CONFIG_NET_CLS_U32=m
 CONFIG_CLS_U32_MARK=y
 CONFIG_NET_CLS_RSVP=m
 CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_NAT=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_XIP=y
-CONFIG_BLK_DEV_XPRAM=m
-CONFIG_DASD=y
-CONFIG_DASD_PROFILE=y
-CONFIG_DASD_ECKD=y
-CONFIG_DASD_FBA=y
-CONFIG_DASD_DIAG=y
-CONFIG_DASD_EER=y
-CONFIG_VIRTIO_BLK=m
+CONFIG_VIRTIO_BLK=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -102,101 +71,92 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ZFCP=y
-CONFIG_SCSI_DH=m
-CONFIG_SCSI_DH_RDAC=m
-CONFIG_SCSI_DH_HP_SW=m
-CONFIG_SCSI_DH_EMC=m
-CONFIG_SCSI_DH_ALUA=m
-CONFIG_SCSI_OSD_INITIATOR=m
-CONFIG_SCSI_OSD_ULD=m
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_BLK_DEV_DM=y
-CONFIG_DM_CRYPT=y
-CONFIG_DM_SNAPSHOT=y
-CONFIG_DM_MIRROR=y
-CONFIG_DM_ZERO=y
-CONFIG_DM_MULTIPATH=m
+CONFIG_ZFCP_DIF=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 CONFIG_EQUALIZER=m
 CONFIG_TUN=m
-CONFIG_VETH=m
 CONFIG_NET_ETHERNET=y
-CONFIG_LCS=m
-CONFIG_CTCM=m
-CONFIG_QETH=y
-CONFIG_QETH_L2=y
-CONFIG_QETH_L3=y
-CONFIG_VIRTIO_NET=m
-CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_VIRTIO_NET=y
 CONFIG_RAW_DRIVER=m
-CONFIG_TN3270=y
-CONFIG_TN3270_TTY=y
-CONFIG_TN3270_FS=m
-CONFIG_TN3270_CONSOLE=y
-CONFIG_TN3215=y
-CONFIG_TN3215_CONSOLE=y
-CONFIG_SCLP_TTY=y
-CONFIG_SCLP_CONSOLE=y
-CONFIG_SCLP_VT220_TTY=y
-CONFIG_SCLP_VT220_CONSOLE=y
-CONFIG_SCLP_CPI=m
-CONFIG_SCLP_ASYNC=m
-CONFIG_S390_TAPE=m
-CONFIG_S390_TAPE_BLOCK=y
-CONFIG_S390_TAPE_34XX=m
-CONFIG_ACCESSIBILITY=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_DLM=m
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
+CONFIG_TIMER_STATS=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
+CONFIG_LOCK_STAT=y
+CONFIG_DEBUG_LOCKDEP=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_NOTIFIERS=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+CONFIG_KPROBES_SANITY_TEST=y
+CONFIG_CPU_NOTIFIER_ERROR_INJECT=m
+CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_SAMPLES=y
-CONFIG_CRYPTO_FIPS=y
+CONFIG_DEBUG_PAGEALLOC=y
+# CONFIG_FTRACE is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_CTS=m
 CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
 CONFIG_CRYPTO_RMD256=m
 CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_ZLIB=m
 CONFIG_CRYPTO_LZO=m
 CONFIG_ZCRYPT=m
+CONFIG_CRYPTO_SHA1_S390=m
+CONFIG_CRYPTO_SHA256_S390=m
 CONFIG_CRYPTO_SHA512_S390=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC32=m
+CONFIG_CRYPTO_DES_S390=m
+CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRC7=m
-CONFIG_KVM=m
-CONFIG_VIRTIO_BALLOON=m
+CONFIG_VIRTIO_BALLOON=y
diff --git a/arch/s390/hypfs/Makefile b/arch/s390/hypfs/Makefile
index b08d2abf617..2e671d5004c 100644
--- a/arch/s390/hypfs/Makefile
+++ b/arch/s390/hypfs/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_S390_HYPFS_FS) += s390_hypfs.o
 
-s390_hypfs-objs := inode.o hypfs_diag.o hypfs_vm.o
+s390_hypfs-objs := inode.o hypfs_diag.o hypfs_vm.o hypfs_dbfs.o
diff --git a/arch/s390/hypfs/hypfs.h b/arch/s390/hypfs/hypfs.h
index fa487d4cc08..80c1526f2af 100644
--- a/arch/s390/hypfs/hypfs.h
+++ b/arch/s390/hypfs/hypfs.h
@@ -12,6 +12,8 @@
 #include <linux/fs.h>
 #include <linux/types.h>
 #include <linux/debugfs.h>
+#include <linux/workqueue.h>
+#include <linux/kref.h>
 
 #define REG_FILE_MODE    0440
 #define UPDATE_FILE_MODE 0220
@@ -38,6 +40,33 @@ extern int hypfs_vm_init(void);
 extern void hypfs_vm_exit(void);
 extern int hypfs_vm_create_files(struct super_block *sb, struct dentry *root);
 
-/* Directory for debugfs files */
-extern struct dentry *hypfs_dbfs_dir;
+/* debugfs interface */
+struct hypfs_dbfs_file;
+
+struct hypfs_dbfs_data {
+	void			*buf;
+	void			*buf_free_ptr;
+	size_t			size;
+	struct hypfs_dbfs_file	*dbfs_file;;
+	struct kref		kref;
+};
+
+struct hypfs_dbfs_file {
+	const char	*name;
+	int		(*data_create)(void **data, void **data_free_ptr,
+				       size_t *size);
+	void		(*data_free)(const void *buf_free_ptr);
+
+	/* Private data for hypfs_dbfs.c */
+	struct hypfs_dbfs_data	*data;
+	struct delayed_work	data_free_work;
+	struct mutex		lock;
+	struct dentry		*dentry;
+};
+
+extern int hypfs_dbfs_init(void);
+extern void hypfs_dbfs_exit(void);
+extern int hypfs_dbfs_create_file(struct hypfs_dbfs_file *df);
+extern void hypfs_dbfs_remove_file(struct hypfs_dbfs_file *df);
+
 #endif /* _HYPFS_H_ */
diff --git a/arch/s390/hypfs/hypfs_dbfs.c b/arch/s390/hypfs/hypfs_dbfs.c
new file mode 100644
index 00000000000..b478013b7fe
--- /dev/null
+++ b/arch/s390/hypfs/hypfs_dbfs.c
@@ -0,0 +1,116 @@
+/*
+ * Hypervisor filesystem for Linux on s390 - debugfs interface
+ *
+ * Copyright (C) IBM Corp. 2010
+ * Author(s): Michael Holzheu <holzheu@linux.vnet.ibm.com>
+ */
+
+#include <linux/slab.h>
+#include "hypfs.h"
+
+static struct dentry *dbfs_dir;
+
+static struct hypfs_dbfs_data *hypfs_dbfs_data_alloc(struct hypfs_dbfs_file *f)
+{
+	struct hypfs_dbfs_data *data;
+
+	data = kmalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return NULL;
+	kref_init(&data->kref);
+	data->dbfs_file = f;
+	return data;
+}
+
+static void hypfs_dbfs_data_free(struct kref *kref)
+{
+	struct hypfs_dbfs_data *data;
+
+	data = container_of(kref, struct hypfs_dbfs_data, kref);
+	data->dbfs_file->data_free(data->buf_free_ptr);
+	kfree(data);
+}
+
+static void data_free_delayed(struct work_struct *work)
+{
+	struct hypfs_dbfs_data *data;
+	struct hypfs_dbfs_file *df;
+
+	df = container_of(work, struct hypfs_dbfs_file, data_free_work.work);
+	mutex_lock(&df->lock);
+	data = df->data;
+	df->data = NULL;
+	mutex_unlock(&df->lock);
+	kref_put(&data->kref, hypfs_dbfs_data_free);
+}
+
+static ssize_t dbfs_read(struct file *file, char __user *buf,
+			 size_t size, loff_t *ppos)
+{
+	struct hypfs_dbfs_data *data;
+	struct hypfs_dbfs_file *df;
+	ssize_t rc;
+
+	if (*ppos != 0)
+		return 0;
+
+	df = file->f_path.dentry->d_inode->i_private;
+	mutex_lock(&df->lock);
+	if (!df->data) {
+		data = hypfs_dbfs_data_alloc(df);
+		if (!data) {
+			mutex_unlock(&df->lock);
+			return -ENOMEM;
+		}
+		rc = df->data_create(&data->buf, &data->buf_free_ptr,
+				     &data->size);
+		if (rc) {
+			mutex_unlock(&df->lock);
+			kfree(data);
+			return rc;
+		}
+		df->data = data;
+		schedule_delayed_work(&df->data_free_work, HZ);
+	}
+	data = df->data;
+	kref_get(&data->kref);
+	mutex_unlock(&df->lock);
+
+	rc = simple_read_from_buffer(buf, size, ppos, data->buf, data->size);
+	kref_put(&data->kref, hypfs_dbfs_data_free);
+	return rc;
+}
+
+static const struct file_operations dbfs_ops = {
+	.read		= dbfs_read,
+	.llseek		= no_llseek,
+};
+
+int hypfs_dbfs_create_file(struct hypfs_dbfs_file *df)
+{
+	df->dentry = debugfs_create_file(df->name, 0400, dbfs_dir, df,
+					 &dbfs_ops);
+	if (IS_ERR(df->dentry))
+		return PTR_ERR(df->dentry);
+	mutex_init(&df->lock);
+	INIT_DELAYED_WORK(&df->data_free_work, data_free_delayed);
+	return 0;
+}
+
+void hypfs_dbfs_remove_file(struct hypfs_dbfs_file *df)
+{
+	debugfs_remove(df->dentry);
+}
+
+int hypfs_dbfs_init(void)
+{
+	dbfs_dir = debugfs_create_dir("s390_hypfs", NULL);
+	if (IS_ERR(dbfs_dir))
+		return PTR_ERR(dbfs_dir);
+	return 0;
+}
+
+void hypfs_dbfs_exit(void)
+{
+	debugfs_remove(dbfs_dir);
+}
diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c
index cd4a81be9cf..6023c6dc1fb 100644
--- a/arch/s390/hypfs/hypfs_diag.c
+++ b/arch/s390/hypfs/hypfs_diag.c
@@ -555,81 +555,38 @@ struct dbfs_d204 {
 	char			buf[];	/* d204 buffer */
 } __attribute__ ((packed));
 
-struct dbfs_d204_private {
-	struct dbfs_d204	*d204;	/* Aligned d204 data with header */
-	void			*base;	/* Base pointer (needed for vfree) */
-};
-
-static int dbfs_d204_open(struct inode *inode, struct file *file)
+static int dbfs_d204_create(void **data, void **data_free_ptr, size_t *size)
 {
-	struct dbfs_d204_private *data;
 	struct dbfs_d204 *d204;
 	int rc, buf_size;
+	void *base;
 
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
 	buf_size = PAGE_SIZE * (diag204_buf_pages + 1) + sizeof(d204->hdr);
-	data->base = vmalloc(buf_size);
-	if (!data->base) {
-		rc = -ENOMEM;
-		goto fail_kfree_data;
+	base = vmalloc(buf_size);
+	if (!base)
+		return -ENOMEM;
+	memset(base, 0, buf_size);
+	d204 = page_align_ptr(base + sizeof(d204->hdr)) - sizeof(d204->hdr);
+	rc = diag204_do_store(d204->buf, diag204_buf_pages);
+	if (rc) {
+		vfree(base);
+		return rc;
 	}
-	memset(data->base, 0, buf_size);
-	d204 = page_align_ptr(data->base + sizeof(d204->hdr))
-		- sizeof(d204->hdr);
-	rc = diag204_do_store(&d204->buf, diag204_buf_pages);
-	if (rc)
-		goto fail_vfree_base;
 	d204->hdr.version = DBFS_D204_HDR_VERSION;
 	d204->hdr.len = PAGE_SIZE * diag204_buf_pages;
 	d204->hdr.sc = diag204_store_sc;
-	data->d204 = d204;
-	file->private_data = data;
-	return nonseekable_open(inode, file);
-
-fail_vfree_base:
-	vfree(data->base);
-fail_kfree_data:
-	kfree(data);
-	return rc;
-}
-
-static int dbfs_d204_release(struct inode *inode, struct file *file)
-{
-	struct dbfs_d204_private *data = file->private_data;
-
-	vfree(data->base);
-	kfree(data);
+	*data = d204;
+	*data_free_ptr = base;
+	*size = d204->hdr.len + sizeof(struct dbfs_d204_hdr);
 	return 0;
 }
 
-static ssize_t dbfs_d204_read(struct file *file, char __user *buf,
-			      size_t size, loff_t *ppos)
-{
-	struct dbfs_d204_private *data = file->private_data;
-
-	return simple_read_from_buffer(buf, size, ppos, data->d204,
-				       data->d204->hdr.len +
-				       sizeof(data->d204->hdr));
-}
-
-static const struct file_operations dbfs_d204_ops = {
-	.open		= dbfs_d204_open,
-	.read		= dbfs_d204_read,
-	.release	= dbfs_d204_release,
-	.llseek		= no_llseek,
+static struct hypfs_dbfs_file dbfs_file_d204 = {
+	.name		= "diag_204",
+	.data_create	= dbfs_d204_create,
+	.data_free	= vfree,
 };
 
-static int hypfs_dbfs_init(void)
-{
-	dbfs_d204_file = debugfs_create_file("diag_204", 0400, hypfs_dbfs_dir,
-					     NULL, &dbfs_d204_ops);
-	if (IS_ERR(dbfs_d204_file))
-		return PTR_ERR(dbfs_d204_file);
-	return 0;
-}
-
 __init int hypfs_diag_init(void)
 {
 	int rc;
@@ -639,7 +596,7 @@ __init int hypfs_diag_init(void)
 		return -ENODATA;
 	}
 	if (diag204_info_type == INFO_EXT) {
-		rc = hypfs_dbfs_init();
+		rc = hypfs_dbfs_create_file(&dbfs_file_d204);
 		if (rc)
 			return rc;
 	}
@@ -660,6 +617,7 @@ void hypfs_diag_exit(void)
 	debugfs_remove(dbfs_d204_file);
 	diag224_delete_name_table();
 	diag204_free_buffer();
+	hypfs_dbfs_remove_file(&dbfs_file_d204);
 }
 
 /*
diff --git a/arch/s390/hypfs/hypfs_vm.c b/arch/s390/hypfs/hypfs_vm.c
index 26cf177f6a3..e54796002f6 100644
--- a/arch/s390/hypfs/hypfs_vm.c
+++ b/arch/s390/hypfs/hypfs_vm.c
@@ -20,8 +20,6 @@ static char local_guest[] = "        ";
 static char all_guests[] = "*       ";
 static char *guest_query;
 
-static struct dentry *dbfs_d2fc_file;
-
 struct diag2fc_data {
 	__u32 version;
 	__u32 flags;
@@ -104,7 +102,7 @@ static void *diag2fc_store(char *query, unsigned int *count, int offset)
 	return data;
 }
 
-static void diag2fc_free(void *data)
+static void diag2fc_free(const void *data)
 {
 	vfree(data);
 }
@@ -239,43 +237,29 @@ struct dbfs_d2fc {
 	char			buf[];	/* d2fc buffer */
 } __attribute__ ((packed));
 
-static int dbfs_d2fc_open(struct inode *inode, struct file *file)
+static int dbfs_diag2fc_create(void **data, void **data_free_ptr, size_t *size)
 {
-	struct dbfs_d2fc *data;
+	struct dbfs_d2fc *d2fc;
 	unsigned int count;
 
-	data = diag2fc_store(guest_query, &count, sizeof(data->hdr));
-	if (IS_ERR(data))
-		return PTR_ERR(data);
-	get_clock_ext(data->hdr.tod_ext);
-	data->hdr.len = count * sizeof(struct diag2fc_data);
-	data->hdr.version = DBFS_D2FC_HDR_VERSION;
-	data->hdr.count = count;
-	memset(&data->hdr.reserved, 0, sizeof(data->hdr.reserved));
-	file->private_data = data;
-	return nonseekable_open(inode, file);
-}
-
-static int dbfs_d2fc_release(struct inode *inode, struct file *file)
-{
-	diag2fc_free(file->private_data);
+	d2fc = diag2fc_store(guest_query, &count, sizeof(d2fc->hdr));
+	if (IS_ERR(d2fc))
+		return PTR_ERR(d2fc);
+	get_clock_ext(d2fc->hdr.tod_ext);
+	d2fc->hdr.len = count * sizeof(struct diag2fc_data);
+	d2fc->hdr.version = DBFS_D2FC_HDR_VERSION;
+	d2fc->hdr.count = count;
+	memset(&d2fc->hdr.reserved, 0, sizeof(d2fc->hdr.reserved));
+	*data = d2fc;
+	*data_free_ptr = d2fc;
+	*size = d2fc->hdr.len + sizeof(struct dbfs_d2fc_hdr);
 	return 0;
 }
 
-static ssize_t dbfs_d2fc_read(struct file *file, char __user *buf,
-				    size_t size, loff_t *ppos)
-{
-	struct dbfs_d2fc *data = file->private_data;
-
-	return simple_read_from_buffer(buf, size, ppos, data, data->hdr.len +
-				       sizeof(struct dbfs_d2fc_hdr));
-}
-
-static const struct file_operations dbfs_d2fc_ops = {
-	.open		= dbfs_d2fc_open,
-	.read		= dbfs_d2fc_read,
-	.release	= dbfs_d2fc_release,
-	.llseek		= no_llseek,
+static struct hypfs_dbfs_file dbfs_file_2fc = {
+	.name		= "diag_2fc",
+	.data_create	= dbfs_diag2fc_create,
+	.data_free	= diag2fc_free,
 };
 
 int hypfs_vm_init(void)
@@ -288,18 +272,12 @@ int hypfs_vm_init(void)
 		guest_query = local_guest;
 	else
 		return -EACCES;
-
-	dbfs_d2fc_file = debugfs_create_file("diag_2fc", 0400, hypfs_dbfs_dir,
-					     NULL, &dbfs_d2fc_ops);
-	if (IS_ERR(dbfs_d2fc_file))
-		return PTR_ERR(dbfs_d2fc_file);
-
-	return 0;
+	return hypfs_dbfs_create_file(&dbfs_file_2fc);
 }
 
 void hypfs_vm_exit(void)
 {
 	if (!MACHINE_IS_VM)
 		return;
-	debugfs_remove(dbfs_d2fc_file);
+	hypfs_dbfs_remove_file(&dbfs_file_2fc);
 }
diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c
index 47cc446dab8..6fe874fc5f8 100644
--- a/arch/s390/hypfs/inode.c
+++ b/arch/s390/hypfs/inode.c
@@ -46,8 +46,6 @@ static const struct super_operations hypfs_s_ops;
 /* start of list of all dentries, which have to be deleted on update */
 static struct dentry *hypfs_last_dentry;
 
-struct dentry *hypfs_dbfs_dir;
-
 static void hypfs_update_update(struct super_block *sb)
 {
 	struct hypfs_sb_info *sb_info = sb->s_fs_info;
@@ -471,13 +469,12 @@ static int __init hypfs_init(void)
 {
 	int rc;
 
-	hypfs_dbfs_dir = debugfs_create_dir("s390_hypfs", NULL);
-	if (IS_ERR(hypfs_dbfs_dir))
-		return PTR_ERR(hypfs_dbfs_dir);
-
+	rc = hypfs_dbfs_init();
+	if (rc)
+		return rc;
 	if (hypfs_diag_init()) {
 		rc = -ENODATA;
-		goto fail_debugfs_remove;
+		goto fail_dbfs_exit;
 	}
 	if (hypfs_vm_init()) {
 		rc = -ENODATA;
@@ -499,9 +496,8 @@ fail_hypfs_vm_exit:
 	hypfs_vm_exit();
 fail_hypfs_diag_exit:
 	hypfs_diag_exit();
-fail_debugfs_remove:
-	debugfs_remove(hypfs_dbfs_dir);
-
+fail_dbfs_exit:
+	hypfs_dbfs_exit();
 	pr_err("Initialization of hypfs failed with rc=%i\n", rc);
 	return rc;
 }
@@ -510,7 +506,7 @@ static void __exit hypfs_exit(void)
 {
 	hypfs_diag_exit();
 	hypfs_vm_exit();
-	debugfs_remove(hypfs_dbfs_dir);
+	hypfs_dbfs_exit();
 	unregister_filesystem(&hypfs_type);
 	kobject_put(s390_kobj);
 }
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
index e8501115eca..ff6f62e0ec3 100644
--- a/arch/s390/include/asm/ccwdev.h
+++ b/arch/s390/include/asm/ccwdev.h
@@ -204,6 +204,8 @@ int ccw_device_tm_start_timeout(struct ccw_device *, struct tcw *,
 			    unsigned long, u8, int);
 int ccw_device_tm_intrg(struct ccw_device *cdev);
 
+int ccw_device_get_mdc(struct ccw_device *cdev, u8 mask);
+
 extern int ccw_device_set_online(struct ccw_device *cdev);
 extern int ccw_device_set_offline(struct ccw_device *cdev);
 
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
index 40e2ab0fa3f..08143487829 100644
--- a/arch/s390/include/asm/cputime.h
+++ b/arch/s390/include/asm/cputime.h
@@ -202,7 +202,7 @@ static inline void s390_idle_check(struct pt_regs *regs, __u64 int_clock,
 
 static inline int s390_nohz_delay(int cpu)
 {
-	return per_cpu(s390_idle, cpu).nohz_delay != 0;
+	return __get_cpu_var(s390_idle).nohz_delay != 0;
 }
 
 #define arch_needs_cpu(cpu) s390_nohz_delay(cpu)
diff --git a/arch/s390/include/asm/dasd.h b/arch/s390/include/asm/dasd.h
index b604a9186f8..0be28efe5b6 100644
--- a/arch/s390/include/asm/dasd.h
+++ b/arch/s390/include/asm/dasd.h
@@ -73,6 +73,7 @@ typedef struct dasd_information2_t {
  * 0x02: use diag discipline (diag)
  * 0x04: set the device initially online (internal use only)
  * 0x08: enable ERP related logging
+ * 0x20: give access to raw eckd data
  */
 #define DASD_FEATURE_DEFAULT	     0x00
 #define DASD_FEATURE_READONLY	     0x01
@@ -80,6 +81,8 @@ typedef struct dasd_information2_t {
 #define DASD_FEATURE_INITIAL_ONLINE  0x04
 #define DASD_FEATURE_ERPLOG	     0x08
 #define DASD_FEATURE_FAILFAST	     0x10
+#define DASD_FEATURE_FAILONSLCK      0x20
+#define DASD_FEATURE_USERAW	     0x40
 
 #define DASD_PARTN_BITS 2
 
diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h
index 96c14a9102b..3c29be4836e 100644
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -4,20 +4,17 @@
 #ifndef __ASSEMBLY__
 
 extern void _mcount(void);
-extern unsigned long ftrace_dyn_func;
 
 struct dyn_arch_ftrace { };
 
 #define MCOUNT_ADDR ((long)_mcount)
 
 #ifdef CONFIG_64BIT
-#define MCOUNT_OFFSET_RET 18
-#define MCOUNT_INSN_SIZE  24
-#define MCOUNT_OFFSET	  14
-#else
-#define MCOUNT_OFFSET_RET 26
-#define MCOUNT_INSN_SIZE  30
+#define MCOUNT_INSN_SIZE  12
 #define MCOUNT_OFFSET	   8
+#else
+#define MCOUNT_INSN_SIZE  20
+#define MCOUNT_OFFSET	   4
 #endif
 
 static inline unsigned long ftrace_call_adjust(unsigned long addr)
diff --git a/arch/s390/include/asm/hardirq.h b/arch/s390/include/asm/hardirq.h
index 881d94590ae..e4155d3eb2c 100644
--- a/arch/s390/include/asm/hardirq.h
+++ b/arch/s390/include/asm/hardirq.h
@@ -21,20 +21,4 @@
 
 #define HARDIRQ_BITS	8
 
-void clock_comparator_work(void);
-
-static inline unsigned long long local_tick_disable(void)
-{
-	unsigned long long old;
-
-	old = S390_lowcore.clock_comparator;
-	S390_lowcore.clock_comparator = -1ULL;
-	return old;
-}
-
-static inline void local_tick_enable(unsigned long long comp)
-{
-	S390_lowcore.clock_comparator = comp;
-}
-
 #endif /* __ASM_HARDIRQ_H */
diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h
index 7da991a858f..db14a311f1d 100644
--- a/arch/s390/include/asm/irq.h
+++ b/arch/s390/include/asm/irq.h
@@ -1,23 +1,33 @@
 #ifndef _ASM_IRQ_H
 #define _ASM_IRQ_H
 
-#ifdef __KERNEL__
 #include <linux/hardirq.h>
 
-/*
- * the definition of irqs has changed in 2.5.46:
- * NR_IRQS is no longer the number of i/o
- * interrupts (65536), but rather the number
- * of interrupt classes (2).
- * Only external and i/o interrupts make much sense here (CH).
- */
-
 enum interruption_class {
 	EXTERNAL_INTERRUPT,
 	IO_INTERRUPT,
-
+	EXTINT_CLK,
+	EXTINT_IPI,
+	EXTINT_TMR,
+	EXTINT_TLA,
+	EXTINT_PFL,
+	EXTINT_DSD,
+	EXTINT_VRT,
+	EXTINT_SCP,
+	EXTINT_IUC,
+	IOINT_QAI,
+	IOINT_QDI,
+	IOINT_DAS,
+	IOINT_C15,
+	IOINT_C70,
+	IOINT_TAP,
+	IOINT_VMR,
+	IOINT_LCS,
+	IOINT_CLW,
+	IOINT_CTC,
+	IOINT_APB,
+	NMI_NMI,
 	NR_IRQS,
 };
 
-#endif /* __KERNEL__ */
-#endif
+#endif /* _ASM_IRQ_H */
diff --git a/arch/s390/include/asm/kprobes.h b/arch/s390/include/asm/kprobes.h
index 330f68caffe..a231a9439c4 100644
--- a/arch/s390/include/asm/kprobes.h
+++ b/arch/s390/include/asm/kprobes.h
@@ -31,7 +31,6 @@
 #include <linux/ptrace.h>
 #include <linux/percpu.h>
 
-#define  __ARCH_WANT_KPROBES_INSN_SLOT
 struct pt_regs;
 struct kprobe;
 
@@ -58,23 +57,12 @@ typedef u16 kprobe_opcode_t;
 /* Architecture specific copy of original instruction */
 struct arch_specific_insn {
 	/* copy of original instruction */
-	kprobe_opcode_t *insn;
-	int fixup;
-	int ilen;
-	int reg;
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
 };
 
-struct ins_replace_args {
-	kprobe_opcode_t *ptr;
-	kprobe_opcode_t old;
-	kprobe_opcode_t new;
-};
 struct prev_kprobe {
 	struct kprobe *kp;
 	unsigned long status;
-	unsigned long saved_psw;
-	unsigned long kprobe_saved_imask;
-	unsigned long kprobe_saved_ctl[3];
 };
 
 /* per-cpu kprobe control block */
@@ -82,17 +70,13 @@ struct kprobe_ctlblk {
 	unsigned long kprobe_status;
 	unsigned long kprobe_saved_imask;
 	unsigned long kprobe_saved_ctl[3];
-	struct pt_regs jprobe_saved_regs;
-	unsigned long jprobe_saved_r14;
-	unsigned long jprobe_saved_r15;
 	struct prev_kprobe prev_kprobe;
+	struct pt_regs jprobe_saved_regs;
 	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
 };
 
 void arch_remove_kprobe(struct kprobe *p);
 void kretprobe_trampoline(void);
-int  is_prohibited_opcode(kprobe_opcode_t *instruction);
-void get_instruction_type(struct arch_specific_insn *ainsn);
 
 int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
 int kprobe_exceptions_notify(struct notifier_block *self,
diff --git a/arch/s390/include/asm/mutex.h b/arch/s390/include/asm/mutex.h
index 458c1f7fbc1..688271f5f2e 100644
--- a/arch/s390/include/asm/mutex.h
+++ b/arch/s390/include/asm/mutex.h
@@ -7,3 +7,5 @@
  */
 
 #include <asm-generic/mutex-dec.h>
+
+#define arch_mutex_cpu_relax()	barrier()
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
index a8729ea7e9a..3c987e9ec8d 100644
--- a/arch/s390/include/asm/page.h
+++ b/arch/s390/include/asm/page.h
@@ -130,6 +130,11 @@ struct page;
 void arch_free_page(struct page *page, int order);
 void arch_alloc_page(struct page *page, int order);
 
+static inline int devmem_is_allowed(unsigned long pfn)
+{
+	return 0;
+}
+
 #define HAVE_ARCH_FREE_PAGE
 #define HAVE_ARCH_ALLOC_PAGE
 
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index 8d6f8716957..bf3de04170a 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -32,7 +32,6 @@ static inline void get_cpu_id(struct cpuid *ptr)
 }
 
 extern void s390_adjust_jiffies(void);
-extern void print_cpu_info(void);
 extern int get_cpu_capability(unsigned int *);
 
 /*
@@ -81,7 +80,8 @@ struct thread_struct {
 	mm_segment_t mm_segment;
         unsigned long prot_addr;        /* address of protection-excep.     */
         unsigned int trap_no;
-        per_struct per_info;
+	struct per_regs per_user;	/* User specified PER registers */
+	struct per_event per_event;	/* Cause of the last PER trap */
         /* pfault_wait is used to block the process on a pfault event */
 	unsigned long pfault_wait;
 };
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index d9d42b1e46f..9ad628a8574 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -331,10 +331,60 @@ struct pt_regs
 	unsigned short ilc;
 	unsigned short svcnr;
 };
+
+/*
+ * Program event recording (PER) register set.
+ */
+struct per_regs {
+	unsigned long control;		/* PER control bits */
+	unsigned long start;		/* PER starting address */
+	unsigned long end;		/* PER ending address */
+};
+
+/*
+ * PER event contains information about the cause of the last PER exception.
+ */
+struct per_event {
+	unsigned short cause;		/* PER code, ATMID and AI */
+	unsigned long address;		/* PER address */
+	unsigned char paid;		/* PER access identification */
+};
+
+/*
+ * Simplified per_info structure used to decode the ptrace user space ABI.
+ */
+struct per_struct_kernel {
+	unsigned long cr9;		/* PER control bits */
+	unsigned long cr10;		/* PER starting address */
+	unsigned long cr11;		/* PER ending address */
+	unsigned long bits;		/* Obsolete software bits */
+	unsigned long starting_addr;	/* User specified start address */
+	unsigned long ending_addr;	/* User specified end address */
+	unsigned short perc_atmid;	/* PER trap ATMID */
+	unsigned long address;		/* PER trap instruction address */
+	unsigned char access_id;	/* PER trap access identification */
+};
+
+#define PER_EVENT_MASK			0xE9000000UL
+
+#define PER_EVENT_BRANCH		0x80000000UL
+#define PER_EVENT_IFETCH		0x40000000UL
+#define PER_EVENT_STORE			0x20000000UL
+#define PER_EVENT_STORE_REAL		0x08000000UL
+#define PER_EVENT_NULLIFICATION		0x01000000UL
+
+#define PER_CONTROL_MASK		0x00a00000UL
+
+#define PER_CONTROL_BRANCH_ADDRESS	0x00800000UL
+#define PER_CONTROL_ALTERATION		0x00200000UL
+
 #endif
 
 /*
- * Now for the program event recording (trace) definitions.
+ * Now for the user space program event recording (trace) definitions.
+ * The following structures are used only for the ptrace interface, don't
+ * touch or even look at it if you don't want to modify the user-space
+ * ptrace interface. In particular stay away from it for in-kernel PER.
  */
 typedef struct
 {
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
index 46e96bc1f5a..350e7ee5952 100644
--- a/arch/s390/include/asm/qdio.h
+++ b/arch/s390/include/asm/qdio.h
@@ -361,6 +361,7 @@ struct qdio_initialize {
 	qdio_handler_t *input_handler;
 	qdio_handler_t *output_handler;
 	void (*queue_start_poll) (struct ccw_device *, int, unsigned long);
+	int scan_threshold;
 	unsigned long int_parm;
 	void **input_sbal_addr_array;
 	void **output_sbal_addr_array;
diff --git a/arch/s390/include/asm/qeth.h b/arch/s390/include/asm/qeth.h
index 06cbd1e8c94..90efda0b137 100644
--- a/arch/s390/include/asm/qeth.h
+++ b/arch/s390/include/asm/qeth.h
@@ -28,39 +28,70 @@ struct qeth_arp_cache_entry {
 	__u8  reserved2[32];
 } __attribute__ ((packed));
 
+enum qeth_arp_ipaddrtype {
+	QETHARP_IP_ADDR_V4 = 1,
+	QETHARP_IP_ADDR_V6 = 2,
+};
+struct qeth_arp_entrytype {
+	__u8 mac;
+	__u8 ip;
+} __attribute__((packed));
+
+#define QETH_QARP_MEDIASPECIFIC_BYTES 32
+#define QETH_QARP_MACADDRTYPE_BYTES 1
 struct qeth_arp_qi_entry7 {
-	__u8 media_specific[32];
-	__u8 macaddr_type;
-	__u8 ipaddr_type;
+	__u8 media_specific[QETH_QARP_MEDIASPECIFIC_BYTES];
+	struct qeth_arp_entrytype type;
 	__u8 macaddr[6];
 	__u8 ipaddr[4];
 } __attribute__((packed));
 
+struct qeth_arp_qi_entry7_ipv6 {
+	__u8 media_specific[QETH_QARP_MEDIASPECIFIC_BYTES];
+	struct qeth_arp_entrytype type;
+	__u8 macaddr[6];
+	__u8 ipaddr[16];
+} __attribute__((packed));
+
 struct qeth_arp_qi_entry7_short {
-	__u8 macaddr_type;
-	__u8 ipaddr_type;
+	struct qeth_arp_entrytype type;
 	__u8 macaddr[6];
 	__u8 ipaddr[4];
 } __attribute__((packed));
 
+struct qeth_arp_qi_entry7_short_ipv6 {
+	struct qeth_arp_entrytype type;
+	__u8 macaddr[6];
+	__u8 ipaddr[16];
+} __attribute__((packed));
+
 struct qeth_arp_qi_entry5 {
-	__u8 media_specific[32];
-	__u8 macaddr_type;
-	__u8 ipaddr_type;
+	__u8 media_specific[QETH_QARP_MEDIASPECIFIC_BYTES];
+	struct qeth_arp_entrytype type;
 	__u8 ipaddr[4];
 } __attribute__((packed));
 
+struct qeth_arp_qi_entry5_ipv6 {
+	__u8 media_specific[QETH_QARP_MEDIASPECIFIC_BYTES];
+	struct qeth_arp_entrytype type;
+	__u8 ipaddr[16];
+} __attribute__((packed));
+
 struct qeth_arp_qi_entry5_short {
-	__u8 macaddr_type;
-	__u8 ipaddr_type;
+	struct qeth_arp_entrytype type;
 	__u8 ipaddr[4];
 } __attribute__((packed));
 
+struct qeth_arp_qi_entry5_short_ipv6 {
+	struct qeth_arp_entrytype type;
+	__u8 ipaddr[16];
+} __attribute__((packed));
 /*
  * can be set by user if no "media specific information" is wanted
  * -> saves a lot of space in user space buffer
  */
 #define QETH_QARP_STRIP_ENTRIES  0x8000
+#define QETH_QARP_WITH_IPV6	 0x4000
 #define QETH_QARP_REQUEST_MASK   0x00ff
 
 /* data sent to user space as result of query arp ioctl */
diff --git a/arch/s390/include/asm/s390_ext.h b/arch/s390/include/asm/s390_ext.h
index 1a9307e7084..080876d5f19 100644
--- a/arch/s390/include/asm/s390_ext.h
+++ b/arch/s390/include/asm/s390_ext.h
@@ -1,32 +1,17 @@
-#ifndef _S390_EXTINT_H
-#define _S390_EXTINT_H
-
 /*
- *  include/asm-s390/s390_ext.h
- *
- *  S390 version
- *    Copyright IBM Corp. 1999,2007
- *    Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *    Copyright IBM Corp. 1999,2010
+ *    Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>,
  */
 
+#ifndef _S390_EXTINT_H
+#define _S390_EXTINT_H
+
 #include <linux/types.h>
 
 typedef void (*ext_int_handler_t)(unsigned int, unsigned int, unsigned long);
 
-typedef struct ext_int_info_t {
-	struct ext_int_info_t *next;
-	ext_int_handler_t handler;
-	__u16 code;
-} ext_int_info_t;
-
-extern ext_int_info_t *ext_int_hash[];
-
 int register_external_interrupt(__u16 code, ext_int_handler_t handler);
-int register_early_external_interrupt(__u16 code, ext_int_handler_t handler,
-				      ext_int_info_t *info);
 int unregister_external_interrupt(__u16 code, ext_int_handler_t handler);
-int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler,
-					ext_int_info_t *info);
 
-#endif
+#endif /* _S390_EXTINT_H */
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index edc03cb9cd7..045e009fc16 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -20,7 +20,6 @@ extern void machine_power_off_smp(void);
 
 extern int __cpu_disable (void);
 extern void __cpu_die (unsigned int cpu);
-extern void cpu_die (void) __attribute__ ((noreturn));
 extern int __cpu_up (unsigned int cpu);
 
 extern struct mutex smp_cpu_state_mutex;
@@ -71,8 +70,10 @@ static inline void smp_switch_to_ipl_cpu(void (*func)(void *), void *data)
 
 #ifdef CONFIG_HOTPLUG_CPU
 extern int smp_rescan_cpus(void);
+extern void __noreturn cpu_die(void);
 #else
 static inline int smp_rescan_cpus(void) { return 0; }
+static inline void cpu_die(void) { }
 #endif
 
 #endif /* __ASM_SMP_H */
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
index 3ad16dbf622..6710b0eac16 100644
--- a/arch/s390/include/asm/system.h
+++ b/arch/s390/include/asm/system.h
@@ -20,6 +20,7 @@
 struct task_struct;
 
 extern struct task_struct *__switch_to(void *, void *);
+extern void update_per_regs(struct task_struct *task);
 
 static inline void save_fp_regs(s390_fp_regs *fpregs)
 {
@@ -93,6 +94,7 @@ static inline void restore_access_regs(unsigned int *acrs)
 	if (next->mm) {							\
 		restore_fp_regs(&next->thread.fp_regs);			\
 		restore_access_regs(&next->thread.acrs[0]);		\
+		update_per_regs(next);					\
 	}								\
 	prev = __switch_to(prev,next);					\
 } while (0)
@@ -101,11 +103,9 @@ extern void account_vtime(struct task_struct *, struct task_struct *);
 extern void account_tick_vtime(struct task_struct *);
 
 #ifdef CONFIG_PFAULT
-extern void pfault_irq_init(void);
 extern int pfault_init(void);
 extern void pfault_fini(void);
 #else /* CONFIG_PFAULT */
-#define pfault_irq_init()	do { } while (0)
 #define pfault_init()		({-1;})
 #define pfault_fini()		do { } while (0)
 #endif /* CONFIG_PFAULT */
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index 5baf0230b29..ebc77091466 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -74,7 +74,7 @@ struct thread_info {
 /* how to get the thread information struct from C */
 static inline struct thread_info *current_thread_info(void)
 {
-	return (struct thread_info *)(S390_lowcore.kernel_stack - THREAD_SIZE);
+	return (struct thread_info *) S390_lowcore.thread_info;
 }
 
 #define THREAD_SIZE_ORDER THREAD_ORDER
@@ -88,7 +88,7 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_SIGPENDING		2	/* signal pending */
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_RESTART_SVC		4	/* restart svc with new svc number */
-#define TIF_SINGLE_STEP		6	/* deliver sigtrap on return to user */
+#define TIF_PER_TRAP		6	/* deliver sigtrap on return to user */
 #define TIF_MCCK_PENDING	7	/* machine check handling is pending */
 #define TIF_SYSCALL_TRACE	8	/* syscall trace active */
 #define TIF_SYSCALL_AUDIT	9	/* syscall auditing active */
@@ -99,14 +99,15 @@ static inline struct thread_info *current_thread_info(void)
 #define TIF_31BIT		17	/* 32bit process */
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	19	/* restore signal mask in do_signal() */
-#define TIF_FREEZE		20	/* thread is freezing for suspend */
+#define TIF_SINGLE_STEP		20	/* This task is single stepped */
+#define TIF_FREEZE		21	/* thread is freezing for suspend */
 
 #define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
 #define _TIF_RESTART_SVC	(1<<TIF_RESTART_SVC)
-#define _TIF_SINGLE_STEP	(1<<TIF_SINGLE_STEP)
+#define _TIF_PER_TRAP		(1<<TIF_PER_TRAP)
 #define _TIF_MCCK_PENDING	(1<<TIF_MCCK_PENDING)
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
@@ -114,6 +115,7 @@ static inline struct thread_info *current_thread_info(void)
 #define _TIF_SYSCALL_TRACEPOINT	(1<<TIF_SYSCALL_TRACEPOINT)
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_31BIT		(1<<TIF_31BIT)
+#define _TIF_SINGLE_STEP	(1<<TIF_FREEZE)
 #define _TIF_FREEZE		(1<<TIF_FREEZE)
 
 #endif /* __KERNEL__ */
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index 09d345a701d..88829a40af6 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -11,6 +11,8 @@
 #ifndef _ASM_S390_TIMEX_H
 #define _ASM_S390_TIMEX_H
 
+#include <asm/lowcore.h>
+
 /* The value of the TOD clock for 1.1.1970. */
 #define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
 
@@ -49,6 +51,24 @@ static inline void store_clock_comparator(__u64 *time)
 	asm volatile("stckc %0" : "=Q" (*time));
 }
 
+void clock_comparator_work(void);
+
+static inline unsigned long long local_tick_disable(void)
+{
+	unsigned long long old;
+
+	old = S390_lowcore.clock_comparator;
+	S390_lowcore.clock_comparator = -1ULL;
+	set_clock_comparator(S390_lowcore.clock_comparator);
+	return old;
+}
+
+static inline void local_tick_enable(unsigned long long comp)
+{
+	S390_lowcore.clock_comparator = comp;
+	set_clock_comparator(S390_lowcore.clock_comparator);
+}
+
 #define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
 
 typedef unsigned long long cycles_t;
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 33982e7ce04..fe03c140002 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -23,14 +23,16 @@ int main(void)
 {
 	DEFINE(__THREAD_info, offsetof(struct task_struct, stack));
 	DEFINE(__THREAD_ksp, offsetof(struct task_struct, thread.ksp));
-	DEFINE(__THREAD_per, offsetof(struct task_struct, thread.per_info));
 	DEFINE(__THREAD_mm_segment, offsetof(struct task_struct, thread.mm_segment));
 	BLANK();
 	DEFINE(__TASK_pid, offsetof(struct task_struct, pid));
 	BLANK();
-	DEFINE(__PER_atmid, offsetof(per_struct, lowcore.words.perc_atmid));
-	DEFINE(__PER_address, offsetof(per_struct, lowcore.words.address));
-	DEFINE(__PER_access_id, offsetof(per_struct, lowcore.words.access_id));
+	DEFINE(__THREAD_per_cause,
+	       offsetof(struct task_struct, thread.per_event.cause));
+	DEFINE(__THREAD_per_address,
+	       offsetof(struct task_struct, thread.per_event.address));
+	DEFINE(__THREAD_per_paid,
+	       offsetof(struct task_struct, thread.per_event.paid));
 	BLANK();
 	DEFINE(__TI_task, offsetof(struct thread_info, task));
 	DEFINE(__TI_domain, offsetof(struct thread_info, exec_domain));
@@ -85,9 +87,9 @@ int main(void)
 	DEFINE(__LC_PGM_ILC, offsetof(struct _lowcore, pgm_ilc));
 	DEFINE(__LC_PGM_INT_CODE, offsetof(struct _lowcore, pgm_code));
 	DEFINE(__LC_TRANS_EXC_CODE, offsetof(struct _lowcore, trans_exc_code));
-	DEFINE(__LC_PER_ATMID, offsetof(struct _lowcore, per_perc_atmid));
+	DEFINE(__LC_PER_CAUSE, offsetof(struct _lowcore, per_perc_atmid));
 	DEFINE(__LC_PER_ADDRESS, offsetof(struct _lowcore, per_address));
-	DEFINE(__LC_PER_ACCESS_ID, offsetof(struct _lowcore, per_access_id));
+	DEFINE(__LC_PER_PAID, offsetof(struct _lowcore, per_access_id));
 	DEFINE(__LC_AR_MODE_ID, offsetof(struct _lowcore, ar_access_id));
 	DEFINE(__LC_SUBCHANNEL_ID, offsetof(struct _lowcore, subchannel_id));
 	DEFINE(__LC_SUBCHANNEL_NR, offsetof(struct _lowcore, subchannel_nr));
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 1e6449c79ab..53acaa86dd9 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -25,7 +25,6 @@
 #include <linux/resource.h>
 #include <linux/times.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/s390/kernel/compat_ptrace.h b/arch/s390/kernel/compat_ptrace.h
index 3141025724f..12b82383351 100644
--- a/arch/s390/kernel/compat_ptrace.h
+++ b/arch/s390/kernel/compat_ptrace.h
@@ -4,40 +4,19 @@
 #include <asm/ptrace.h>    /* needed for NUM_CR_WORDS */
 #include "compat_linux.h"  /* needed for psw_compat_t */
 
-typedef struct {
-	__u32 cr[NUM_CR_WORDS];
-} per_cr_words32;
-
-typedef struct {
-	__u16          perc_atmid;          /* 0x096 */
-	__u32          address;             /* 0x098 */
-	__u8           access_id;           /* 0x0a1 */
-} per_lowcore_words32;
-
-typedef struct {
-	union {
-		per_cr_words32   words;
-	} control_regs;
-	/*
-	 * Use these flags instead of setting em_instruction_fetch
-	 * directly they are used so that single stepping can be
-	 * switched on & off while not affecting other tracing
-	 */
-	unsigned  single_step       : 1;
-	unsigned  instruction_fetch : 1;
-	unsigned                    : 30;
-	/*
-	 * These addresses are copied into cr10 & cr11 if single
-	 * stepping is switched off
-	 */
-	__u32     starting_addr;
-	__u32     ending_addr;
-	union {
-		per_lowcore_words32 words;
-	} lowcore; 
-} per_struct32;
+struct compat_per_struct_kernel {
+	__u32 cr9;		/* PER control bits */
+	__u32 cr10;		/* PER starting address */
+	__u32 cr11;		/* PER ending address */
+	__u32 bits;		/* Obsolete software bits */
+	__u32 starting_addr;	/* User specified start address */
+	__u32 ending_addr;	/* User specified end address */
+	__u16 perc_atmid;	/* PER trap ATMID */
+	__u32 address;		/* PER trap instruction address */
+	__u8  access_id;	/* PER trap access identification */
+};
 
-struct user_regs_struct32
+struct compat_user_regs_struct
 {
 	psw_compat_t psw;
 	u32 gprs[NUM_GPRS];
@@ -50,14 +29,14 @@ struct user_regs_struct32
 	 * itself as there is no "official" ptrace interface for hardware
 	 * watchpoints. This is the way intel does it.
 	 */
-	per_struct32 per_info;
+	struct compat_per_struct_kernel per_info;
 	u32  ieee_instruction_pointer;	/* obsolete, always 0 */
 };
 
-struct user32 {
+struct compat_user {
 	/* We start with the registers, to mimic the way that "memory"
 	   is returned from the ptrace(3,...) function.  */
-	struct user_regs_struct32 regs; /* Where the registers are actually stored */
+	struct compat_user_regs_struct regs;
 	/* The rest of this junk is to help gdb figure out what goes where */
 	u32 u_tsize;		/* Text segment size (pages). */
 	u32 u_dsize;	        /* Data segment size (pages). */
@@ -79,6 +58,6 @@ typedef struct
 	__u32   len;
 	__u32   kernel_addr;
 	__u32   process_addr;
-} ptrace_area_emu31;
+} compat_ptrace_area;
 
 #endif /* _PTRACE32_H */
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 1ecc337fb67..648f64239a9 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -9,7 +9,6 @@
  *		 Heiko Carstens <heiko.carstens@de.ibm.com>
  */
 
-#include <linux/sys.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/cache.h>
@@ -49,7 +48,7 @@ SP_SVCNR     =	STACK_FRAME_OVERHEAD + __PT_SVCNR
 SP_SIZE      =	STACK_FRAME_OVERHEAD + __PT_SIZE
 
 _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
-		 _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
+		 _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_PER_TRAP )
 _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING)
 _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
@@ -110,31 +109,36 @@ STACK_SIZE  = 1 << STACK_SHIFT
 1:	stm	%r10,%r11,\lc_sum
 	.endm
 
-	.macro	SAVE_ALL_BASE savearea
+	.macro	SAVE_ALL_SVC psworg,savearea
 	stm	%r12,%r15,\savearea
 	l	%r13,__LC_SVC_NEW_PSW+4	# load &system_call to %r13
+	l	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
+	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
 	.endm
 
-	.macro	SAVE_ALL_SVC psworg,savearea
-	la	%r12,\psworg
-	l	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
+	.macro	SAVE_ALL_BASE savearea
+	stm	%r12,%r15,\savearea
+	l	%r13,__LC_SVC_NEW_PSW+4	# load &system_call to %r13
 	.endm
 
-	.macro	SAVE_ALL_SYNC psworg,savearea
-	la	%r12,\psworg
+	.macro	SAVE_ALL_PGM psworg,savearea
 	tm	\psworg+1,0x01		# test problem state bit
-	bz	BASED(2f)		# skip stack setup save
-	l	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
 #ifdef CONFIG_CHECK_STACK
-	b	BASED(3f)
-2:	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
-	bz	BASED(stack_overflow)
-3:
+	bnz	BASED(1f)
+	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
+	bnz	BASED(2f)
+	la	%r12,\psworg
+	b	BASED(stack_overflow)
+#else
+	bz	BASED(2f)
 #endif
-2:
+1:	l	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
+2:	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
 	.endm
 
 	.macro	SAVE_ALL_ASYNC psworg,savearea
+	stm	%r12,%r15,\savearea
+	l	%r13,__LC_SVC_NEW_PSW+4	# load &system_call to %r13
 	la	%r12,\psworg
 	tm	\psworg+1,0x01		# test problem state bit
 	bnz	BASED(1f)		# from user -> load async stack
@@ -149,27 +153,23 @@ STACK_SIZE  = 1 << STACK_SHIFT
 0:	l	%r14,__LC_ASYNC_STACK	# are we already on the async stack ?
 	slr	%r14,%r15
 	sra	%r14,STACK_SHIFT
-	be	BASED(2f)
-1:	l	%r15,__LC_ASYNC_STACK
 #ifdef CONFIG_CHECK_STACK
-	b	BASED(3f)
-2:	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
-	bz	BASED(stack_overflow)
-3:
+	bnz	BASED(1f)
+	tml	%r15,STACK_SIZE - CONFIG_STACK_GUARD
+	bnz	BASED(2f)
+	b	BASED(stack_overflow)
+#else
+	bz	BASED(2f)
 #endif
-2:
+1:	l	%r15,__LC_ASYNC_STACK
+2:	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
 	.endm
 
-	.macro	CREATE_STACK_FRAME psworg,savearea
-	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
-	mvc	SP_PSW(8,%r15),0(%r12)	# move user PSW to stack
+	.macro	CREATE_STACK_FRAME savearea
+	xc	__SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
 	st	%r2,SP_ORIG_R2(%r15)	# store original content of gpr 2
-	icm	%r12,12,__LC_SVC_ILC
-	stm	%r0,%r11,SP_R0(%r15)	# store gprs %r0-%r11 to kernel stack
-	st	%r12,SP_ILC(%r15)
 	mvc	SP_R12(16,%r15),\savearea # move %r12-%r15 to stack
-	la	%r12,0
-	st	%r12,__SF_BACKCHAIN(%r15)	# clear back chain
+	stm	%r0,%r11,SP_R0(%r15)	# store gprs %r0-%r11 to kernel stack
 	.endm
 
 	.macro	RESTORE_ALL psworg,sync
@@ -188,6 +188,8 @@ STACK_SIZE  = 1 << STACK_SHIFT
 	ssm	__SF_EMPTY(%r15)
 	.endm
 
+	.section .kprobes.text, "ax"
+
 /*
  * Scheduler resume function, called by switch_to
  *  gpr2 = (task_struct *) prev
@@ -198,31 +200,21 @@ STACK_SIZE  = 1 << STACK_SHIFT
 	.globl	__switch_to
 __switch_to:
 	basr	%r1,0
-__switch_to_base:
-	tm	__THREAD_per(%r3),0xe8		# new process is using per ?
-	bz	__switch_to_noper-__switch_to_base(%r1)	# if not we're fine
-	stctl	%c9,%c11,__SF_EMPTY(%r15)	# We are using per stuff
-	clc	__THREAD_per(12,%r3),__SF_EMPTY(%r15)
-	be	__switch_to_noper-__switch_to_base(%r1)	# we got away w/o bashing TLB's
-	lctl	%c9,%c11,__THREAD_per(%r3)	# Nope we didn't
-__switch_to_noper:
-	l	%r4,__THREAD_info(%r2)		# get thread_info of prev
+0:	l	%r4,__THREAD_info(%r2)		# get thread_info of prev
+	l	%r5,__THREAD_info(%r3)		# get thread_info of next
 	tm	__TI_flags+3(%r4),_TIF_MCCK_PENDING # machine check pending?
-	bz	__switch_to_no_mcck-__switch_to_base(%r1)
-	ni	__TI_flags+3(%r4),255-_TIF_MCCK_PENDING # clear flag in prev
-	l	%r4,__THREAD_info(%r3)		# get thread_info of next
-	oi	__TI_flags+3(%r4),_TIF_MCCK_PENDING # set it in next
-__switch_to_no_mcck:
-	stm	%r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task
-	st	%r15,__THREAD_ksp(%r2)	# store kernel stack to prev->tss.ksp
-	l	%r15,__THREAD_ksp(%r3)	# load kernel stack from next->tss.ksp
-	lm	%r6,%r15,__SF_GPRS(%r15)# load __switch_to registers of next task
-	st	%r3,__LC_CURRENT	# __LC_CURRENT = current task struct
-	lctl	%c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4
-	l	%r3,__THREAD_info(%r3)	# load thread_info from task struct
-	st	%r3,__LC_THREAD_INFO
-	ahi	%r3,STACK_SIZE
-	st	%r3,__LC_KERNEL_STACK	# __LC_KERNEL_STACK = new kernel stack
+	bz	1f-0b(%r1)
+	ni	__TI_flags+3(%r4),255-_TIF_MCCK_PENDING	# clear flag in prev
+	oi	__TI_flags+3(%r5),_TIF_MCCK_PENDING	# set it in next
+1:	stm	%r6,%r15,__SF_GPRS(%r15)	# store gprs of prev task
+	st	%r15,__THREAD_ksp(%r2)		# store kernel stack of prev
+	l	%r15,__THREAD_ksp(%r3)		# load kernel stack of next
+	lctl	%c4,%c4,__TASK_pid(%r3)		# load pid to control reg. 4
+	lm	%r6,%r15,__SF_GPRS(%r15)	# load gprs of next task
+	st	%r3,__LC_CURRENT		# store task struct of next
+	st	%r5,__LC_THREAD_INFO		# store thread info of next
+	ahi	%r5,STACK_SIZE			# end of kernel stack of next
+	st	%r5,__LC_KERNEL_STACK		# store end of kernel stack
 	br	%r14
 
 __critical_start:
@@ -235,10 +227,11 @@ __critical_start:
 system_call:
 	stpt	__LC_SYNC_ENTER_TIMER
 sysc_saveall:
-	SAVE_ALL_BASE __LC_SAVE_AREA
 	SAVE_ALL_SVC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
-	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
-	lh	%r7,0x8a	  # get svc number from lowcore
+	CREATE_STACK_FRAME __LC_SAVE_AREA
+	mvc	SP_PSW(8,%r15),__LC_SVC_OLD_PSW
+	mvc	SP_ILC(4,%r15),__LC_SVC_ILC
+	l	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 sysc_vtime:
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
 sysc_stime:
@@ -246,20 +239,20 @@ sysc_stime:
 sysc_update:
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
 sysc_do_svc:
-	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	ltr	%r7,%r7			# test for svc 0
+	xr	%r7,%r7
+	icm	%r7,3,SP_SVCNR(%r15)	# load svc number and test for svc 0
 	bnz	BASED(sysc_nr_ok)	# svc number > 0
 	# svc 0: system call number in %r1
 	cl	%r1,BASED(.Lnr_syscalls)
 	bnl	BASED(sysc_nr_ok)
+	sth	%r1,SP_SVCNR(%r15)
 	lr	%r7,%r1 	  # copy svc number to %r7
 sysc_nr_ok:
-	sth	%r7,SP_SVCNR(%r15)
 	sll	%r7,2		  # svc number *4
-	l	%r8,BASED(.Lsysc_table)
-	tm	__TI_flags+2(%r9),_TIF_SYSCALL
+	l	%r10,BASED(.Lsysc_table)
+	tm	__TI_flags+2(%r12),_TIF_SYSCALL
 	mvc	SP_ARGS(4,%r15),SP_R7(%r15)
-	l	%r8,0(%r7,%r8)	  # get system call addr.
+	l	%r8,0(%r7,%r10)	  # get system call addr.
 	bnz	BASED(sysc_tracesys)
 	basr	%r14,%r8	  # call sys_xxxx
 	st	%r2,SP_R2(%r15)   # store return value (change R2 on stack)
@@ -267,7 +260,7 @@ sysc_nr_ok:
 sysc_return:
 	LOCKDEP_SYS_EXIT
 sysc_tif:
-	tm	__TI_flags+3(%r9),_TIF_WORK_SVC
+	tm	__TI_flags+3(%r12),_TIF_WORK_SVC
 	bnz	BASED(sysc_work)  # there is work to do (signals etc.)
 sysc_restore:
 	RESTORE_ALL __LC_RETURN_PSW,1
@@ -284,17 +277,17 @@ sysc_work:
 # One of the work bits is on. Find out which one.
 #
 sysc_work_tif:
-	tm	__TI_flags+3(%r9),_TIF_MCCK_PENDING
+	tm	__TI_flags+3(%r12),_TIF_MCCK_PENDING
 	bo	BASED(sysc_mcck_pending)
-	tm	__TI_flags+3(%r9),_TIF_NEED_RESCHED
+	tm	__TI_flags+3(%r12),_TIF_NEED_RESCHED
 	bo	BASED(sysc_reschedule)
-	tm	__TI_flags+3(%r9),_TIF_SIGPENDING
+	tm	__TI_flags+3(%r12),_TIF_SIGPENDING
 	bo	BASED(sysc_sigpending)
-	tm	__TI_flags+3(%r9),_TIF_NOTIFY_RESUME
+	tm	__TI_flags+3(%r12),_TIF_NOTIFY_RESUME
 	bo	BASED(sysc_notify_resume)
-	tm	__TI_flags+3(%r9),_TIF_RESTART_SVC
+	tm	__TI_flags+3(%r12),_TIF_RESTART_SVC
 	bo	BASED(sysc_restart)
-	tm	__TI_flags+3(%r9),_TIF_SINGLE_STEP
+	tm	__TI_flags+3(%r12),_TIF_PER_TRAP
 	bo	BASED(sysc_singlestep)
 	b	BASED(sysc_return)	# beware of critical section cleanup
 
@@ -318,13 +311,13 @@ sysc_mcck_pending:
 # _TIF_SIGPENDING is set, call do_signal
 #
 sysc_sigpending:
-	ni	__TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
+	ni	__TI_flags+3(%r12),255-_TIF_PER_TRAP # clear TIF_PER_TRAP
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	l	%r1,BASED(.Ldo_signal)
 	basr	%r14,%r1		# call do_signal
-	tm	__TI_flags+3(%r9),_TIF_RESTART_SVC
+	tm	__TI_flags+3(%r12),_TIF_RESTART_SVC
 	bo	BASED(sysc_restart)
-	tm	__TI_flags+3(%r9),_TIF_SINGLE_STEP
+	tm	__TI_flags+3(%r12),_TIF_PER_TRAP
 	bo	BASED(sysc_singlestep)
 	b	BASED(sysc_return)
 
@@ -342,23 +335,23 @@ sysc_notify_resume:
 # _TIF_RESTART_SVC is set, set up registers and restart svc
 #
 sysc_restart:
-	ni	__TI_flags+3(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
+	ni	__TI_flags+3(%r12),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
 	l	%r7,SP_R2(%r15) 	# load new svc number
 	mvc	SP_R2(4,%r15),SP_ORIG_R2(%r15) # restore first argument
 	lm	%r2,%r6,SP_R2(%r15)	# load svc arguments
+	sth	%r7,SP_SVCNR(%r15)
 	b	BASED(sysc_nr_ok)	# restart svc
 
 #
-# _TIF_SINGLE_STEP is set, call do_single_step
+# _TIF_PER_TRAP is set, call do_per_trap
 #
 sysc_singlestep:
-	ni	__TI_flags+3(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
-	mvi	SP_SVCNR(%r15),0xff	# set trap indication to pgm check
-	mvi	SP_SVCNR+1(%r15),0xff
+	ni	__TI_flags+3(%r12),255-_TIF_PER_TRAP # clear TIF_PER_TRAP
+	xc	SP_SVCNR(2,%r15),SP_SVCNR(%r15)		# clear svc number
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	l	%r1,BASED(.Lhandle_per)	# load adr. of per handler
 	la	%r14,BASED(sysc_return)	# load adr. of system return
-	br	%r1			# branch to do_single_step
+	br	%r1			# branch to do_per_trap
 
 #
 # call tracehook_report_syscall_entry/tracehook_report_syscall_exit before
@@ -368,15 +361,15 @@ sysc_tracesys:
 	l	%r1,BASED(.Ltrace_entry)
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	la	%r3,0
-	srl	%r7,2
-	st	%r7,SP_R2(%r15)
+	xr	%r0,%r0
+	icm	%r0,3,SP_SVCNR(%r15)
+	st	%r0,SP_R2(%r15)
 	basr	%r14,%r1
 	cl	%r2,BASED(.Lnr_syscalls)
 	bnl	BASED(sysc_tracenogo)
-	l	%r8,BASED(.Lsysc_table)
 	lr	%r7,%r2
 	sll	%r7,2			# svc number *4
-	l	%r8,0(%r7,%r8)
+	l	%r8,0(%r7,%r10)
 sysc_tracego:
 	lm	%r3,%r6,SP_R3(%r15)
 	mvc	SP_ARGS(4,%r15),SP_R7(%r15)
@@ -384,7 +377,7 @@ sysc_tracego:
 	basr	%r14,%r8		# call sys_xxx
 	st	%r2,SP_R2(%r15)		# store return value
 sysc_tracenogo:
-	tm	__TI_flags+2(%r9),_TIF_SYSCALL
+	tm	__TI_flags+2(%r12),_TIF_SYSCALL
 	bz	BASED(sysc_return)
 	l	%r1,BASED(.Ltrace_exit)
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
@@ -397,7 +390,7 @@ sysc_tracenogo:
 	.globl	ret_from_fork
 ret_from_fork:
 	l	%r13,__LC_SVC_NEW_PSW+4
-	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
+	l	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	SP_PSW+1(%r15),0x01	# forking a kernel thread ?
 	bo	BASED(0f)
 	st	%r15,SP_R15(%r15)	# store stack pointer for new kthread
@@ -432,8 +425,8 @@ kernel_execve:
 0:	stnsm	__SF_EMPTY(%r15),0xfc	# disable interrupts
 	l	%r15,__LC_KERNEL_STACK	# load ksp
 	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
-	l	%r9,__LC_THREAD_INFO
 	mvc	SP_PTREGS(__PT_SIZE,%r15),0(%r12)	# copy pt_regs
+	l	%r12,__LC_THREAD_INFO
 	xc	__SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	l	%r1,BASED(.Lexecve_tail)
@@ -463,26 +456,27 @@ pgm_check_handler:
 	SAVE_ALL_BASE __LC_SAVE_AREA
 	tm	__LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception
 	bnz	BASED(pgm_per)		# got per exception -> special case
-	SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA
-	CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA
+	SAVE_ALL_PGM __LC_PGM_OLD_PSW,__LC_SAVE_AREA
+	CREATE_STACK_FRAME __LC_SAVE_AREA
+	xc	SP_ILC(4,%r15),SP_ILC(%r15)
+	mvc	SP_PSW(8,%r15),__LC_PGM_OLD_PSW
+	l	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	bz	BASED(pgm_no_vtime)
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
 pgm_no_vtime:
-	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
 	l	%r3,__LC_PGM_ILC	# load program interruption code
 	l	%r4,__LC_TRANS_EXC_CODE
 	REENABLE_IRQS
 	la	%r8,0x7f
 	nr	%r8,%r3
-pgm_do_call:
-	l	%r7,BASED(.Ljump_table)
 	sll	%r8,2
-	l	%r7,0(%r8,%r7)		# load address of handler routine
+	l	%r1,BASED(.Ljump_table)
+	l	%r1,0(%r8,%r1)		# load address of handler routine
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
-	basr	%r14,%r7		# branch to interrupt-handler
+	basr	%r14,%r1		# branch to interrupt-handler
 pgm_exit:
 	b	BASED(sysc_return)
 
@@ -503,33 +497,34 @@ pgm_per:
 # Normal per exception
 #
 pgm_per_std:
-	SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA
-	CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA
+	SAVE_ALL_PGM __LC_PGM_OLD_PSW,__LC_SAVE_AREA
+	CREATE_STACK_FRAME __LC_SAVE_AREA
+	mvc	SP_PSW(8,%r15),__LC_PGM_OLD_PSW
+	l	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	bz	BASED(pgm_no_vtime2)
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
 pgm_no_vtime2:
-	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	l	%r1,__TI_task(%r9)
+	l	%r1,__TI_task(%r12)
 	tm	SP_PSW+1(%r15),0x01	# kernel per event ?
 	bz	BASED(kernel_per)
-	mvc	__THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
-	mvc	__THREAD_per+__PER_address(4,%r1),__LC_PER_ADDRESS
-	mvc	__THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
-	oi	__TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
+	mvc	__THREAD_per_cause(2,%r1),__LC_PER_CAUSE
+	mvc	__THREAD_per_address(4,%r1),__LC_PER_ADDRESS
+	mvc	__THREAD_per_paid(1,%r1),__LC_PER_PAID
+	oi	__TI_flags+3(%r12),_TIF_PER_TRAP # set TIF_PER_TRAP
 	l	%r3,__LC_PGM_ILC	# load program interruption code
 	l	%r4,__LC_TRANS_EXC_CODE
 	REENABLE_IRQS
 	la	%r8,0x7f
 	nr	%r8,%r3 		# clear per-event-bit and ilc
 	be	BASED(pgm_exit2)	# only per or per+check ?
-	l	%r7,BASED(.Ljump_table)
 	sll	%r8,2
-	l	%r7,0(%r8,%r7)		# load address of handler routine
+	l	%r1,BASED(.Ljump_table)
+	l	%r1,0(%r8,%r1)		# load address of handler routine
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
-	basr	%r14,%r7		# branch to interrupt-handler
+	basr	%r14,%r1		# branch to interrupt-handler
 pgm_exit2:
 	b	BASED(sysc_return)
 
@@ -537,18 +532,19 @@ pgm_exit2:
 # it was a single stepped SVC that is causing all the trouble
 #
 pgm_svcper:
-	SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
-	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
+	SAVE_ALL_PGM __LC_SVC_OLD_PSW,__LC_SAVE_AREA
+	CREATE_STACK_FRAME __LC_SAVE_AREA
+	mvc	SP_PSW(8,%r15),__LC_SVC_OLD_PSW
+	mvc	SP_ILC(4,%r15),__LC_SVC_ILC
+	l	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
-	lh	%r7,0x8a		# get svc number from lowcore
-	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
-	l	%r8,__TI_task(%r9)
-	mvc	__THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID
-	mvc	__THREAD_per+__PER_address(4,%r8),__LC_PER_ADDRESS
-	mvc	__THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
-	oi	__TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
+	l	%r8,__TI_task(%r12)
+	mvc	__THREAD_per_cause(2,%r8),__LC_PER_CAUSE
+	mvc	__THREAD_per_address(4,%r8),__LC_PER_ADDRESS
+	mvc	__THREAD_per_paid(1,%r8),__LC_PER_PAID
+	oi	__TI_flags+3(%r12),_TIF_PER_TRAP # set TIF_PER_TRAP
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	lm	%r2,%r6,SP_R2(%r15)	# load svc arguments
 	b	BASED(sysc_do_svc)
@@ -558,8 +554,7 @@ pgm_svcper:
 #
 kernel_per:
 	REENABLE_IRQS
-	mvi	SP_SVCNR(%r15),0xff	# set trap indication to pgm check
-	mvi	SP_SVCNR+1(%r15),0xff
+	xc	SP_SVCNR(2,%r15),SP_SVCNR(%r15)
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	l	%r1,BASED(.Lhandle_per)	# load adr. of per handler
 	basr	%r14,%r1		# branch to do_single_step
@@ -573,9 +568,10 @@ kernel_per:
 io_int_handler:
 	stck	__LC_INT_CLOCK
 	stpt	__LC_ASYNC_ENTER_TIMER
-	SAVE_ALL_BASE __LC_SAVE_AREA+16
 	SAVE_ALL_ASYNC __LC_IO_OLD_PSW,__LC_SAVE_AREA+16
-	CREATE_STACK_FRAME __LC_IO_OLD_PSW,__LC_SAVE_AREA+16
+	CREATE_STACK_FRAME __LC_SAVE_AREA+16
+	mvc	SP_PSW(8,%r15),0(%r12)	# move user PSW to stack
+	l	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	bz	BASED(io_no_vtime)
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
@@ -583,7 +579,6 @@ io_int_handler:
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
 io_no_vtime:
 	TRACE_IRQS_OFF
-	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
 	l	%r1,BASED(.Ldo_IRQ)	# load address of do_IRQ
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	basr	%r14,%r1		# branch to standard irq handler
@@ -591,7 +586,7 @@ io_return:
 	LOCKDEP_SYS_EXIT
 	TRACE_IRQS_ON
 io_tif:
-	tm	__TI_flags+3(%r9),_TIF_WORK_INT
+	tm	__TI_flags+3(%r12),_TIF_WORK_INT
 	bnz	BASED(io_work)		# there is work to do (signals etc.)
 io_restore:
 	RESTORE_ALL __LC_RETURN_PSW,0
@@ -609,9 +604,9 @@ io_work:
 	bo	BASED(io_work_user)	# yes -> do resched & signal
 #ifdef CONFIG_PREEMPT
 	# check for preemptive scheduling
-	icm	%r0,15,__TI_precount(%r9)
+	icm	%r0,15,__TI_precount(%r12)
 	bnz	BASED(io_restore)	# preemption disabled
-	tm	__TI_flags+3(%r9),_TIF_NEED_RESCHED
+	tm	__TI_flags+3(%r12),_TIF_NEED_RESCHED
 	bno	BASED(io_restore)
 	# switch to kernel stack
 	l	%r1,SP_R15(%r15)
@@ -645,13 +640,13 @@ io_work_user:
 #		and _TIF_MCCK_PENDING
 #
 io_work_tif:
-	tm	__TI_flags+3(%r9),_TIF_MCCK_PENDING
+	tm	__TI_flags+3(%r12),_TIF_MCCK_PENDING
 	bo	BASED(io_mcck_pending)
-	tm	__TI_flags+3(%r9),_TIF_NEED_RESCHED
+	tm	__TI_flags+3(%r12),_TIF_NEED_RESCHED
 	bo	BASED(io_reschedule)
-	tm	__TI_flags+3(%r9),_TIF_SIGPENDING
+	tm	__TI_flags+3(%r12),_TIF_SIGPENDING
 	bo	BASED(io_sigpending)
-	tm	__TI_flags+3(%r9),_TIF_NOTIFY_RESUME
+	tm	__TI_flags+3(%r12),_TIF_NOTIFY_RESUME
 	bo	BASED(io_notify_resume)
 	b	BASED(io_return)	# beware of critical section cleanup
 
@@ -711,16 +706,16 @@ io_notify_resume:
 ext_int_handler:
 	stck	__LC_INT_CLOCK
 	stpt	__LC_ASYNC_ENTER_TIMER
-	SAVE_ALL_BASE __LC_SAVE_AREA+16
 	SAVE_ALL_ASYNC __LC_EXT_OLD_PSW,__LC_SAVE_AREA+16
-	CREATE_STACK_FRAME __LC_EXT_OLD_PSW,__LC_SAVE_AREA+16
+	CREATE_STACK_FRAME __LC_SAVE_AREA+16
+	mvc	SP_PSW(8,%r15),0(%r12)	# move user PSW to stack
+	l	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
 	bz	BASED(ext_no_vtime)
 	UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
 ext_no_vtime:
-	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
 	TRACE_IRQS_OFF
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	l	%r3,__LC_CPU_ADDRESS	# get cpu address + interruption code
@@ -775,7 +770,10 @@ mcck_int_main:
 	sra	%r14,PAGE_SHIFT
 	be	BASED(0f)
 	l	%r15,__LC_PANIC_STACK	# load panic stack
-0:	CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+32
+0:	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
+	CREATE_STACK_FRAME __LC_SAVE_AREA+32
+	mvc	SP_PSW(8,%r15),0(%r12)
+	l	%r12,__LC_THREAD_INFO	# load pointer to thread_info struct
 	tm	__LC_MCCK_CODE+2,0x08	# mwp of old psw valid?
 	bno	BASED(mcck_no_vtime)	# no -> skip cleanup critical
 	tm	SP_PSW+1(%r15),0x01	# interrupting from user ?
@@ -784,7 +782,6 @@ mcck_int_main:
 	UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_MCCK_ENTER_TIMER
 mcck_no_vtime:
-	l	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	l	%r1,BASED(.Ls390_mcck)
 	basr	%r14,%r1		# call machine check handler
@@ -796,7 +793,7 @@ mcck_no_vtime:
 	xc	__SF_BACKCHAIN(4,%r1),__SF_BACKCHAIN(%r1) # clear back chain
 	lr	%r15,%r1
 	stosm	__SF_EMPTY(%r15),0x04	# turn dat on
-	tm	__TI_flags+3(%r9),_TIF_MCCK_PENDING
+	tm	__TI_flags+3(%r12),_TIF_MCCK_PENDING
 	bno	BASED(mcck_return)
 	TRACE_IRQS_OFF
 	l	%r1,BASED(.Ls390_handle_mcck)
@@ -861,6 +858,8 @@ restart_crash:
 restart_go:
 #endif
 
+	.section .kprobes.text, "ax"
+
 #ifdef CONFIG_CHECK_STACK
 /*
  * The synchronous or the asynchronous stack overflowed. We are dead.
@@ -943,12 +942,13 @@ cleanup_system_call:
 	bh	BASED(0f)
 	mvc	__LC_SAVE_AREA(16),0(%r12)
 0:	st	%r13,4(%r12)
-	st	%r12,__LC_SAVE_AREA+48	# argh
-	SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
-	CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
-	l	%r12,__LC_SAVE_AREA+48	# argh
+	l	%r15,__LC_KERNEL_STACK	# problem state -> load ksp
+	s	%r15,BASED(.Lc_spsize)	# make room for registers & psw
 	st	%r15,12(%r12)
-	lh	%r7,0x8a
+	CREATE_STACK_FRAME __LC_SAVE_AREA
+	mvc	SP_PSW(8,%r15),__LC_SVC_OLD_PSW
+	mvc	SP_ILC(4,%r15),__LC_SVC_ILC
+	mvc	0(4,%r12),__LC_THREAD_INFO
 cleanup_vtime:
 	clc	__LC_RETURN_PSW+4(4),BASED(cleanup_system_call_insn+12)
 	bhe	BASED(cleanup_stime)
@@ -1046,7 +1046,7 @@ cleanup_io_restore_insn:
 .Ldo_signal:	.long	do_signal
 .Ldo_notify_resume:
 		.long	do_notify_resume
-.Lhandle_per:	.long	do_single_step
+.Lhandle_per:	.long	do_per_trap
 .Ldo_execve:	.long	do_execve
 .Lexecve_tail:	.long	execve_tail
 .Ljump_table:	.long	pgm_check_table
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index 95c1dfc4ef3..17a6f83a2d6 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -12,7 +12,7 @@ pgm_check_handler_t do_dat_exception;
 
 extern int sysctl_userprocess_debug;
 
-void do_single_step(struct pt_regs *regs);
+void do_per_trap(struct pt_regs *regs);
 void syscall_trace(struct pt_regs *regs, int entryexit);
 void kernel_stack_overflow(struct pt_regs * regs);
 void do_signal(struct pt_regs *regs);
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 8f3e802174d..9d3603d6c51 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -51,7 +51,7 @@ STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
 STACK_SIZE  = 1 << STACK_SHIFT
 
 _TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
-		 _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
+		 _TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_PER_TRAP )
 _TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_NEED_RESCHED | \
 		 _TIF_MCCK_PENDING)
 _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
@@ -197,6 +197,8 @@ _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
 	ssm	__SF_EMPTY(%r15)
 	.endm
 
+	.section .kprobes.text, "ax"
+
 /*
  * Scheduler resume function, called by switch_to
  *  gpr2 = (task_struct *) prev
@@ -206,30 +208,21 @@ _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \
  */
 	.globl	__switch_to
 __switch_to:
-	tm	__THREAD_per+4(%r3),0xe8 # is the new process using per ?
-	jz	__switch_to_noper		# if not we're fine
-	stctg	%c9,%c11,__SF_EMPTY(%r15)# We are using per stuff
-	clc	__THREAD_per(24,%r3),__SF_EMPTY(%r15)
-	je	__switch_to_noper	     # we got away without bashing TLB's
-	lctlg	%c9,%c11,__THREAD_per(%r3)	# Nope we didn't
-__switch_to_noper:
-	lg	%r4,__THREAD_info(%r2)		    # get thread_info of prev
+	lg	%r4,__THREAD_info(%r2)		# get thread_info of prev
+	lg	%r5,__THREAD_info(%r3)		# get thread_info of next
 	tm	__TI_flags+7(%r4),_TIF_MCCK_PENDING # machine check pending?
-	jz	__switch_to_no_mcck
-	ni	__TI_flags+7(%r4),255-_TIF_MCCK_PENDING # clear flag in prev
-	lg	%r4,__THREAD_info(%r3)		    # get thread_info of next
-	oi	__TI_flags+7(%r4),_TIF_MCCK_PENDING # set it in next
-__switch_to_no_mcck:
-	stmg	%r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task
-	stg	%r15,__THREAD_ksp(%r2)	# store kernel stack to prev->tss.ksp
-	lg	%r15,__THREAD_ksp(%r3)	# load kernel stack from next->tss.ksp
-	lmg	%r6,%r15,__SF_GPRS(%r15)# load __switch_to registers of next task
-	stg	%r3,__LC_CURRENT	# __LC_CURRENT = current task struct
-	lctl	%c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4
-	lg	%r3,__THREAD_info(%r3)	# load thread_info from task struct
-	stg	%r3,__LC_THREAD_INFO
-	aghi	%r3,STACK_SIZE
-	stg	%r3,__LC_KERNEL_STACK	# __LC_KERNEL_STACK = new kernel stack
+	jz	0f
+	ni	__TI_flags+7(%r4),255-_TIF_MCCK_PENDING	# clear flag in prev
+	oi	__TI_flags+7(%r5),_TIF_MCCK_PENDING	# set it in next
+0:	stmg	%r6,%r15,__SF_GPRS(%r15)	# store gprs of prev task
+	stg	%r15,__THREAD_ksp(%r2)		# store kernel stack of prev
+	lg	%r15,__THREAD_ksp(%r3)		# load kernel stack of next
+	lctl	%c4,%c4,__TASK_pid(%r3)		# load pid to control reg. 4
+	lmg	%r6,%r15,__SF_GPRS(%r15)	# load gprs of next task
+	stg	%r3,__LC_CURRENT		# store task struct of next
+	stg	%r5,__LC_THREAD_INFO		# store thread info of next
+	aghi	%r5,STACK_SIZE			# end of kernel stack of next
+	stg	%r5,__LC_KERNEL_STACK		# store end of kernel stack
 	br	%r14
 
 __critical_start:
@@ -309,7 +302,7 @@ sysc_work_tif:
 	jo	sysc_notify_resume
 	tm	__TI_flags+7(%r12),_TIF_RESTART_SVC
 	jo	sysc_restart
-	tm	__TI_flags+7(%r12),_TIF_SINGLE_STEP
+	tm	__TI_flags+7(%r12),_TIF_PER_TRAP
 	jo	sysc_singlestep
 	j	sysc_return		# beware of critical section cleanup
 
@@ -331,12 +324,12 @@ sysc_mcck_pending:
 # _TIF_SIGPENDING is set, call do_signal
 #
 sysc_sigpending:
-	ni	__TI_flags+7(%r12),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
+	ni	__TI_flags+7(%r12),255-_TIF_PER_TRAP # clear TIF_PER_TRAP
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	brasl	%r14,do_signal		# call do_signal
 	tm	__TI_flags+7(%r12),_TIF_RESTART_SVC
 	jo	sysc_restart
-	tm	__TI_flags+7(%r12),_TIF_SINGLE_STEP
+	tm	__TI_flags+7(%r12),_TIF_PER_TRAP
 	jo	sysc_singlestep
 	j	sysc_return
 
@@ -361,14 +354,14 @@ sysc_restart:
 	j	sysc_nr_ok		# restart svc
 
 #
-# _TIF_SINGLE_STEP is set, call do_single_step
+# _TIF_PER_TRAP is set, call do_per_trap
 #
 sysc_singlestep:
-	ni	__TI_flags+7(%r12),255-_TIF_SINGLE_STEP	# clear TIF_SINGLE_STEP
+	ni	__TI_flags+7(%r12),255-_TIF_PER_TRAP	# clear TIF_PER_TRAP
 	xc	SP_SVCNR(2,%r15),SP_SVCNR(%r15)		# clear svc number
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	larl	%r14,sysc_return	# load adr. of system return
-	jg	do_single_step		# branch to do_sigtrap
+	jg	do_per_trap
 
 #
 # call tracehook_report_syscall_entry/tracehook_report_syscall_exit before
@@ -524,10 +517,10 @@ pgm_no_vtime2:
 	lg	%r1,__TI_task(%r12)
 	tm	SP_PSW+1(%r15),0x01	# kernel per event ?
 	jz	kernel_per
-	mvc	__THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
-	mvc	__THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS
-	mvc	__THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
-	oi	__TI_flags+7(%r12),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
+	mvc	__THREAD_per_cause(2,%r1),__LC_PER_CAUSE
+	mvc	__THREAD_per_address(8,%r1),__LC_PER_ADDRESS
+	mvc	__THREAD_per_paid(1,%r1),__LC_PER_PAID
+	oi	__TI_flags+7(%r12),_TIF_PER_TRAP # set TIF_PER_TRAP
 	lgf	%r3,__LC_PGM_ILC	# load program interruption code
 	lg	%r4,__LC_TRANS_EXC_CODE
 	REENABLE_IRQS
@@ -556,10 +549,10 @@ pgm_svcper:
 	mvc	__LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
 	LAST_BREAK
 	lg	%r8,__TI_task(%r12)
-	mvc	__THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID
-	mvc	__THREAD_per+__PER_address(8,%r8),__LC_PER_ADDRESS
-	mvc	__THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID
-	oi	__TI_flags+7(%r12),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
+	mvc	__THREAD_per_cause(2,%r8),__LC_PER_CAUSE
+	mvc	__THREAD_per_address(8,%r8),__LC_PER_ADDRESS
+	mvc	__THREAD_per_paid(1,%r8),__LC_PER_PAID
+	oi	__TI_flags+7(%r12),_TIF_PER_TRAP # set TIF_PER_TRAP
 	stosm	__SF_EMPTY(%r15),0x03	# reenable interrupts
 	lmg	%r2,%r6,SP_R2(%r15)	# load svc arguments
 	j	sysc_do_svc
@@ -571,7 +564,7 @@ kernel_per:
 	REENABLE_IRQS
 	xc	SP_SVCNR(2,%r15),SP_SVCNR(%r15)	# clear svc number
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
-	brasl	%r14,do_single_step
+	brasl	%r14,do_per_trap
 	j	pgm_exit
 
 /*
@@ -868,6 +861,8 @@ restart_crash:
 restart_go:
 #endif
 
+	.section .kprobes.text, "ax"
+
 #ifdef CONFIG_CHECK_STACK
 /*
  * The synchronous or the asynchronous stack overflowed. We are dead.
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 6a83d058131..78bdf0e5dff 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -4,7 +4,7 @@
  * Copyright IBM Corp. 2009
  *
  *   Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
- *
+ *		Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
 #include <linux/hardirq.h>
@@ -12,176 +12,144 @@
 #include <linux/ftrace.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/kprobes.h>
 #include <trace/syscall.h>
 #include <asm/asm-offsets.h>
 
+#ifdef CONFIG_64BIT
+#define MCOUNT_OFFSET_RET 12
+#else
+#define MCOUNT_OFFSET_RET 22
+#endif
+
 #ifdef CONFIG_DYNAMIC_FTRACE
 
 void ftrace_disable_code(void);
-void ftrace_disable_return(void);
-void ftrace_call_code(void);
-void ftrace_nop_code(void);
-
-#define FTRACE_INSN_SIZE 4
+void ftrace_enable_insn(void);
 
 #ifdef CONFIG_64BIT
-
+/*
+ * The 64-bit mcount code looks like this:
+ *	stg	%r14,8(%r15)		# offset 0
+ * >	larl	%r1,<&counter>		# offset 6
+ * >	brasl	%r14,_mcount		# offset 12
+ *	lg	%r14,8(%r15)		# offset 18
+ * Total length is 24 bytes. The middle two instructions of the mcount
+ * block get overwritten by ftrace_make_nop / ftrace_make_call.
+ * The 64-bit enabled ftrace code block looks like this:
+ *	stg	%r14,8(%r15)		# offset 0
+ * >	lg	%r1,__LC_FTRACE_FUNC	# offset 6
+ * >	lgr	%r0,%r0			# offset 12
+ * >	basr	%r14,%r1		# offset 16
+ *	lg	%r14,8(%15)		# offset 18
+ * The return points of the mcount/ftrace function have the same offset 18.
+ * The 64-bit disable ftrace code block looks like this:
+ *	stg	%r14,8(%r15)		# offset 0
+ * >	jg	.+18			# offset 6
+ * >	lgr	%r0,%r0			# offset 12
+ * >	basr	%r14,%r1		# offset 16
+ *	lg	%r14,8(%15)		# offset 18
+ * The jg instruction branches to offset 24 to skip as many instructions
+ * as possible.
+ */
 asm(
 	"	.align	4\n"
 	"ftrace_disable_code:\n"
-	"	j	0f\n"
-	"	.word	0x0024\n"
-	"	lg	%r1,"__stringify(__LC_FTRACE_FUNC)"\n"
-	"	basr	%r14,%r1\n"
-	"ftrace_disable_return:\n"
-	"	lg	%r14,8(15)\n"
+	"	jg	0f\n"
 	"	lgr	%r0,%r0\n"
-	"0:\n");
-
-asm(
+	"	basr	%r14,%r1\n"
+	"0:\n"
 	"	.align	4\n"
-	"ftrace_nop_code:\n"
-	"	j	.+"__stringify(MCOUNT_INSN_SIZE)"\n");
+	"ftrace_enable_insn:\n"
+	"	lg	%r1,"__stringify(__LC_FTRACE_FUNC)"\n");
 
-asm(
-	"	.align	4\n"
-	"ftrace_call_code:\n"
-	"	stg	%r14,8(%r15)\n");
+#define FTRACE_INSN_SIZE	6
 
 #else /* CONFIG_64BIT */
-
+/*
+ * The 31-bit mcount code looks like this:
+ *	st	%r14,4(%r15)		# offset 0
+ * >	bras	%r1,0f			# offset 4
+ * >	.long	_mcount			# offset 8
+ * >	.long	<&counter>		# offset 12
+ * > 0:	l	%r14,0(%r1)		# offset 16
+ * >	l	%r1,4(%r1)		# offset 20
+ *	basr	%r14,%r14		# offset 24
+ *	l	%r14,4(%r15)		# offset 26
+ * Total length is 30 bytes. The twenty bytes starting from offset 4
+ * to offset 24 get overwritten by ftrace_make_nop / ftrace_make_call.
+ * The 31-bit enabled ftrace code block looks like this:
+ *	st	%r14,4(%r15)		# offset 0
+ * >	l	%r14,__LC_FTRACE_FUNC	# offset 4
+ * >	j	0f			# offset 8
+ * >	.fill	12,1,0x07		# offset 12
+ *   0:	basr	%r14,%r14		# offset 24
+ *	l	%r14,4(%r14)		# offset 26
+ * The return points of the mcount/ftrace function have the same offset 26.
+ * The 31-bit disabled ftrace code block looks like this:
+ *	st	%r14,4(%r15)		# offset 0
+ * >	j	.+26			# offset 4
+ * >	j	0f			# offset 8
+ * >	.fill	12,1,0x07		# offset 12
+ *   0:	basr	%r14,%r14		# offset 24
+ *	l	%r14,4(%r14)		# offset 26
+ * The j instruction branches to offset 30 to skip as many instructions
+ * as possible.
+ */
 asm(
 	"	.align	4\n"
 	"ftrace_disable_code:\n"
+	"	j	1f\n"
 	"	j	0f\n"
-	"	l	%r1,"__stringify(__LC_FTRACE_FUNC)"\n"
-	"	basr	%r14,%r1\n"
-	"ftrace_disable_return:\n"
-	"	l	%r14,4(%r15)\n"
-	"	j	0f\n"
-	"	bcr	0,%r7\n"
-	"	bcr	0,%r7\n"
-	"	bcr	0,%r7\n"
-	"	bcr	0,%r7\n"
-	"	bcr	0,%r7\n"
-	"	bcr	0,%r7\n"
-	"0:\n");
-
-asm(
+	"	.fill	12,1,0x07\n"
+	"0:	basr	%r14,%r14\n"
+	"1:\n"
 	"	.align	4\n"
-	"ftrace_nop_code:\n"
-	"	j	.+"__stringify(MCOUNT_INSN_SIZE)"\n");
+	"ftrace_enable_insn:\n"
+	"	l	%r14,"__stringify(__LC_FTRACE_FUNC)"\n");
 
-asm(
-	"	.align	4\n"
-	"ftrace_call_code:\n"
-	"	st	%r14,4(%r15)\n");
+#define FTRACE_INSN_SIZE	4
 
 #endif /* CONFIG_64BIT */
 
-static int ftrace_modify_code(unsigned long ip,
-			      void *old_code, int old_size,
-			      void *new_code, int new_size)
-{
-	unsigned char replaced[MCOUNT_INSN_SIZE];
-
-	/*
-	 * Note: Due to modules code can disappear and change.
-	 *  We need to protect against faulting as well as code
-	 *  changing. We do this by using the probe_kernel_*
-	 *  functions.
-	 *  This however is just a simple sanity check.
-	 */
-	if (probe_kernel_read(replaced, (void *)ip, old_size))
-		return -EFAULT;
-	if (memcmp(replaced, old_code, old_size) != 0)
-		return -EINVAL;
-	if (probe_kernel_write((void *)ip, new_code, new_size))
-		return -EPERM;
-	return 0;
-}
-
-static int ftrace_make_initial_nop(struct module *mod, struct dyn_ftrace *rec,
-				   unsigned long addr)
-{
-	return ftrace_modify_code(rec->ip,
-				  ftrace_call_code, FTRACE_INSN_SIZE,
-				  ftrace_disable_code, MCOUNT_INSN_SIZE);
-}
 
 int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 		    unsigned long addr)
 {
-	if (addr == MCOUNT_ADDR)
-		return ftrace_make_initial_nop(mod, rec, addr);
-	return ftrace_modify_code(rec->ip,
-				  ftrace_call_code, FTRACE_INSN_SIZE,
-				  ftrace_nop_code, FTRACE_INSN_SIZE);
+	if (probe_kernel_write((void *) rec->ip, ftrace_disable_code,
+			       MCOUNT_INSN_SIZE))
+		return -EPERM;
+	return 0;
 }
 
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
-	return ftrace_modify_code(rec->ip,
-				  ftrace_nop_code, FTRACE_INSN_SIZE,
-				  ftrace_call_code, FTRACE_INSN_SIZE);
+	if (probe_kernel_write((void *) rec->ip, ftrace_enable_insn,
+			       FTRACE_INSN_SIZE))
+		return -EPERM;
+	return 0;
 }
 
 int ftrace_update_ftrace_func(ftrace_func_t func)
 {
-	ftrace_dyn_func = (unsigned long)func;
 	return 0;
 }
 
 int __init ftrace_dyn_arch_init(void *data)
 {
-	*(unsigned long *)data = 0;
+	*(unsigned long *) data = 0;
 	return 0;
 }
 
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-#ifdef CONFIG_DYNAMIC_FTRACE
-/*
- * Patch the kernel code at ftrace_graph_caller location:
- * The instruction there is branch relative on condition. The condition mask
- * is either all ones (always branch aka disable ftrace_graph_caller) or all
- * zeroes (nop aka enable ftrace_graph_caller).
- * Instruction format for brc is a7m4xxxx where m is the condition mask.
- */
-int ftrace_enable_ftrace_graph_caller(void)
-{
-	unsigned short opcode = 0xa704;
-
-	return probe_kernel_write(ftrace_graph_caller, &opcode, sizeof(opcode));
-}
-
-int ftrace_disable_ftrace_graph_caller(void)
-{
-	unsigned short opcode = 0xa7f4;
-
-	return probe_kernel_write(ftrace_graph_caller, &opcode, sizeof(opcode));
-}
-
-static inline unsigned long ftrace_mcount_call_adjust(unsigned long addr)
-{
-	return addr - (ftrace_disable_return - ftrace_disable_code);
-}
-
-#else /* CONFIG_DYNAMIC_FTRACE */
-
-static inline unsigned long ftrace_mcount_call_adjust(unsigned long addr)
-{
-	return addr - MCOUNT_OFFSET_RET;
-}
-
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
 /*
  * Hook the return address and push it in the stack of return addresses
  * in current thread info.
  */
-unsigned long prepare_ftrace_return(unsigned long ip, unsigned long parent)
+unsigned long __kprobes prepare_ftrace_return(unsigned long parent,
+					      unsigned long ip)
 {
 	struct ftrace_graph_ent trace;
 
@@ -189,14 +157,42 @@ unsigned long prepare_ftrace_return(unsigned long ip, unsigned long parent)
 		goto out;
 	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
 		goto out;
-	trace.func = ftrace_mcount_call_adjust(ip) & PSW_ADDR_INSN;
+	trace.func = (ip & PSW_ADDR_INSN) - MCOUNT_OFFSET_RET;
 	/* Only trace if the calling function expects to. */
 	if (!ftrace_graph_entry(&trace)) {
 		current->curr_ret_stack--;
 		goto out;
 	}
-	parent = (unsigned long)return_to_handler;
+	parent = (unsigned long) return_to_handler;
 out:
 	return parent;
 }
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+/*
+ * Patch the kernel code at ftrace_graph_caller location. The instruction
+ * there is branch relative and save to prepare_ftrace_return. To disable
+ * the call to prepare_ftrace_return we patch the bras offset to point
+ * directly after the instructions. To enable the call we calculate
+ * the original offset to prepare_ftrace_return and put it back.
+ */
+int ftrace_enable_ftrace_graph_caller(void)
+{
+	unsigned short offset;
+
+	offset = ((void *) prepare_ftrace_return -
+		  (void *) ftrace_graph_caller) / 2;
+	return probe_kernel_write(ftrace_graph_caller + 2,
+				  &offset, sizeof(offset));
+}
+
+int ftrace_disable_ftrace_graph_caller(void)
+{
+	static unsigned short offset = 0x0002;
+
+	return probe_kernel_write(ftrace_graph_caller + 2,
+				  &offset, sizeof(offset));
+}
+
+#endif /* CONFIG_DYNAMIC_FTRACE */
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index 026a37a94fc..ea5099c9709 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -1,7 +1,5 @@
 /*
- *  arch/s390/kernel/irq.c
- *
- *    Copyright IBM Corp. 2004,2007
+ *    Copyright IBM Corp. 2004,2010
  *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
  *		 Thomas Spatzier (tspat@de.ibm.com)
  *
@@ -17,12 +15,42 @@
 #include <linux/proc_fs.h>
 #include <linux/profile.h>
 
+struct irq_class {
+	char *name;
+	char *desc;
+};
+
+static const struct irq_class intrclass_names[] = {
+	{.name = "EXT" },
+	{.name = "I/O" },
+	{.name = "CLK", .desc = "[EXT] Clock Comparator" },
+	{.name = "IPI", .desc = "[EXT] Signal Processor" },
+	{.name = "TMR", .desc = "[EXT] CPU Timer" },
+	{.name = "TAL", .desc = "[EXT] Timing Alert" },
+	{.name = "PFL", .desc = "[EXT] Pseudo Page Fault" },
+	{.name = "DSD", .desc = "[EXT] DASD Diag" },
+	{.name = "VRT", .desc = "[EXT] Virtio" },
+	{.name = "SCP", .desc = "[EXT] Service Call" },
+	{.name = "IUC", .desc = "[EXT] IUCV" },
+	{.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt" },
+	{.name = "QDI", .desc = "[I/O] QDIO Interrupt" },
+	{.name = "DAS", .desc = "[I/O] DASD" },
+	{.name = "C15", .desc = "[I/O] 3215" },
+	{.name = "C70", .desc = "[I/O] 3270" },
+	{.name = "TAP", .desc = "[I/O] Tape" },
+	{.name = "VMR", .desc = "[I/O] Unit Record Devices" },
+	{.name = "LCS", .desc = "[I/O] LCS" },
+	{.name = "CLW", .desc = "[I/O] CLAW" },
+	{.name = "CTC", .desc = "[I/O] CTC" },
+	{.name = "APB", .desc = "[I/O] AP Bus" },
+	{.name = "NMI", .desc = "[NMI] Machine Check" },
+};
+
 /*
  * show_interrupts is needed by /proc/interrupts.
  */
 int show_interrupts(struct seq_file *p, void *v)
 {
-	static const char *intrclass_names[] = { "EXT", "I/O", };
 	int i = *(loff_t *) v, j;
 
 	get_online_cpus();
@@ -34,15 +62,16 @@ int show_interrupts(struct seq_file *p, void *v)
 	}
 
 	if (i < NR_IRQS) {
-		seq_printf(p, "%s: ", intrclass_names[i]);
+		seq_printf(p, "%s: ", intrclass_names[i].name);
 #ifndef CONFIG_SMP
 		seq_printf(p, "%10u ", kstat_irqs(i));
 #else
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
 #endif
+		if (intrclass_names[i].desc)
+			seq_printf(p, "  %s", intrclass_names[i].desc);
                 seq_putc(p, '\n');
-
         }
 	put_online_cpus();
         return 0;
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index d60fc439851..1d05d669107 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -30,35 +30,16 @@
 #include <asm/sections.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/hardirq.h>
 
-DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
+DEFINE_PER_CPU(struct kprobe *, current_kprobe);
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
 
-struct kretprobe_blackpoint kretprobe_blacklist[] = {{NULL, NULL}};
+struct kretprobe_blackpoint kretprobe_blacklist[] = { };
 
-int __kprobes arch_prepare_kprobe(struct kprobe *p)
-{
-	/* Make sure the probe isn't going on a difficult instruction */
-	if (is_prohibited_opcode((kprobe_opcode_t *) p->addr))
-		return -EINVAL;
-
-	if ((unsigned long)p->addr & 0x01)
-		return -EINVAL;
-
-	/* Use the get_insn_slot() facility for correctness */
-	if (!(p->ainsn.insn = get_insn_slot()))
-		return -ENOMEM;
-
-	memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
-
-	get_instruction_type(&p->ainsn);
-	p->opcode = *p->addr;
-	return 0;
-}
-
-int __kprobes is_prohibited_opcode(kprobe_opcode_t *instruction)
+static int __kprobes is_prohibited_opcode(kprobe_opcode_t *insn)
 {
-	switch (*(__u8 *) instruction) {
+	switch (insn[0] >> 8) {
 	case 0x0c:	/* bassm */
 	case 0x0b:	/* bsm	 */
 	case 0x83:	/* diag  */
@@ -67,7 +48,7 @@ int __kprobes is_prohibited_opcode(kprobe_opcode_t *instruction)
 	case 0xad:	/* stosm */
 		return -EINVAL;
 	}
-	switch (*(__u16 *) instruction) {
+	switch (insn[0]) {
 	case 0x0101:	/* pr	 */
 	case 0xb25a:	/* bsa	 */
 	case 0xb240:	/* bakr  */
@@ -80,93 +61,92 @@ int __kprobes is_prohibited_opcode(kprobe_opcode_t *instruction)
 	return 0;
 }
 
-void __kprobes get_instruction_type(struct arch_specific_insn *ainsn)
+static int __kprobes get_fixup_type(kprobe_opcode_t *insn)
 {
 	/* default fixup method */
-	ainsn->fixup = FIXUP_PSW_NORMAL;
-
-	/* save r1 operand */
-	ainsn->reg = (*ainsn->insn & 0xf0) >> 4;
+	int fixup = FIXUP_PSW_NORMAL;
 
-	/* save the instruction length (pop 5-5) in bytes */
-	switch (*(__u8 *) (ainsn->insn) >> 6) {
-	case 0:
-		ainsn->ilen = 2;
-		break;
-	case 1:
-	case 2:
-		ainsn->ilen = 4;
-		break;
-	case 3:
-		ainsn->ilen = 6;
-		break;
-	}
-
-	switch (*(__u8 *) ainsn->insn) {
+	switch (insn[0] >> 8) {
 	case 0x05:	/* balr	*/
 	case 0x0d:	/* basr */
-		ainsn->fixup = FIXUP_RETURN_REGISTER;
+		fixup = FIXUP_RETURN_REGISTER;
 		/* if r2 = 0, no branch will be taken */
-		if ((*ainsn->insn & 0x0f) == 0)
-			ainsn->fixup |= FIXUP_BRANCH_NOT_TAKEN;
+		if ((insn[0] & 0x0f) == 0)
+			fixup |= FIXUP_BRANCH_NOT_TAKEN;
 		break;
 	case 0x06:	/* bctr	*/
 	case 0x07:	/* bcr	*/
-		ainsn->fixup = FIXUP_BRANCH_NOT_TAKEN;
+		fixup = FIXUP_BRANCH_NOT_TAKEN;
 		break;
 	case 0x45:	/* bal	*/
 	case 0x4d:	/* bas	*/
-		ainsn->fixup = FIXUP_RETURN_REGISTER;
+		fixup = FIXUP_RETURN_REGISTER;
 		break;
 	case 0x47:	/* bc	*/
 	case 0x46:	/* bct	*/
 	case 0x86:	/* bxh	*/
 	case 0x87:	/* bxle	*/
-		ainsn->fixup = FIXUP_BRANCH_NOT_TAKEN;
+		fixup = FIXUP_BRANCH_NOT_TAKEN;
 		break;
 	case 0x82:	/* lpsw	*/
-		ainsn->fixup = FIXUP_NOT_REQUIRED;
+		fixup = FIXUP_NOT_REQUIRED;
 		break;
 	case 0xb2:	/* lpswe */
-		if (*(((__u8 *) ainsn->insn) + 1) == 0xb2) {
-			ainsn->fixup = FIXUP_NOT_REQUIRED;
-		}
+		if ((insn[0] & 0xff) == 0xb2)
+			fixup = FIXUP_NOT_REQUIRED;
 		break;
 	case 0xa7:	/* bras	*/
-		if ((*ainsn->insn & 0x0f) == 0x05) {
-			ainsn->fixup |= FIXUP_RETURN_REGISTER;
-		}
+		if ((insn[0] & 0x0f) == 0x05)
+			fixup |= FIXUP_RETURN_REGISTER;
 		break;
 	case 0xc0:
-		if ((*ainsn->insn & 0x0f) == 0x00  /* larl  */
-			|| (*ainsn->insn & 0x0f) == 0x05) /* brasl */
-		ainsn->fixup |= FIXUP_RETURN_REGISTER;
+		if ((insn[0] & 0x0f) == 0x00 ||	/* larl  */
+		    (insn[0] & 0x0f) == 0x05)	/* brasl */
+		fixup |= FIXUP_RETURN_REGISTER;
 		break;
 	case 0xeb:
-		if (*(((__u8 *) ainsn->insn) + 5 ) == 0x44 ||	/* bxhg  */
-			*(((__u8 *) ainsn->insn) + 5) == 0x45) {/* bxleg */
-			ainsn->fixup = FIXUP_BRANCH_NOT_TAKEN;
-		}
+		if ((insn[2] & 0xff) == 0x44 ||	/* bxhg  */
+		    (insn[2] & 0xff) == 0x45)	/* bxleg */
+			fixup = FIXUP_BRANCH_NOT_TAKEN;
 		break;
 	case 0xe3:	/* bctg	*/
-		if (*(((__u8 *) ainsn->insn) + 5) == 0x46) {
-			ainsn->fixup = FIXUP_BRANCH_NOT_TAKEN;
-		}
+		if ((insn[2] & 0xff) == 0x46)
+			fixup = FIXUP_BRANCH_NOT_TAKEN;
 		break;
 	}
+	return fixup;
+}
+
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
+{
+	if ((unsigned long) p->addr & 0x01)
+		return -EINVAL;
+
+	/* Make sure the probe isn't going on a difficult instruction */
+	if (is_prohibited_opcode(p->addr))
+		return -EINVAL;
+
+	p->opcode = *p->addr;
+	memcpy(p->ainsn.insn, p->addr, ((p->opcode >> 14) + 3) & -2);
+
+	return 0;
 }
 
+struct ins_replace_args {
+	kprobe_opcode_t *ptr;
+	kprobe_opcode_t opcode;
+};
+
 static int __kprobes swap_instruction(void *aref)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 	unsigned long status = kcb->kprobe_status;
 	struct ins_replace_args *args = aref;
-	int rc;
 
 	kcb->kprobe_status = KPROBE_SWAP_INST;
-	rc = probe_kernel_write(args->ptr, &args->new, sizeof(args->new));
+	probe_kernel_write(args->ptr, &args->opcode, sizeof(args->opcode));
 	kcb->kprobe_status = status;
-	return rc;
+	return 0;
 }
 
 void __kprobes arch_arm_kprobe(struct kprobe *p)
@@ -174,8 +154,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 	struct ins_replace_args args;
 
 	args.ptr = p->addr;
-	args.old = p->opcode;
-	args.new = BREAKPOINT_INSTRUCTION;
+	args.opcode = BREAKPOINT_INSTRUCTION;
 	stop_machine(swap_instruction, &args, NULL);
 }
 
@@ -184,64 +163,69 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 	struct ins_replace_args args;
 
 	args.ptr = p->addr;
-	args.old = BREAKPOINT_INSTRUCTION;
-	args.new = p->opcode;
+	args.opcode = p->opcode;
 	stop_machine(swap_instruction, &args, NULL);
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
-	if (p->ainsn.insn) {
-		free_insn_slot(p->ainsn.insn, 0);
-		p->ainsn.insn = NULL;
-	}
 }
 
-static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes enable_singlestep(struct kprobe_ctlblk *kcb,
+					struct pt_regs *regs,
+					unsigned long ip)
 {
-	per_cr_bits kprobe_per_regs[1];
+	struct per_regs per_kprobe;
 
-	memset(kprobe_per_regs, 0, sizeof(per_cr_bits));
-	regs->psw.addr = (unsigned long)p->ainsn.insn | PSW_ADDR_AMODE;
+	/* Set up the PER control registers %cr9-%cr11 */
+	per_kprobe.control = PER_EVENT_IFETCH;
+	per_kprobe.start = ip;
+	per_kprobe.end = ip;
 
-	/* Set up the per control reg info, will pass to lctl */
-	kprobe_per_regs[0].em_instruction_fetch = 1;
-	kprobe_per_regs[0].starting_addr = (unsigned long)p->ainsn.insn;
-	kprobe_per_regs[0].ending_addr = (unsigned long)p->ainsn.insn + 1;
+	/* Save control regs and psw mask */
+	__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
+	kcb->kprobe_saved_imask = regs->psw.mask &
+		(PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT);
 
-	/* Set the PER control regs, turns on single step for this address */
-	__ctl_load(kprobe_per_regs, 9, 11);
+	/* Set PER control regs, turns on single step for the given address */
+	__ctl_load(per_kprobe, 9, 11);
 	regs->psw.mask |= PSW_MASK_PER;
-	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK);
+	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
+	regs->psw.addr = ip | PSW_ADDR_AMODE;
 }
 
-static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
+static void __kprobes disable_singlestep(struct kprobe_ctlblk *kcb,
+					 struct pt_regs *regs,
+					 unsigned long ip)
 {
-	kcb->prev_kprobe.kp = kprobe_running();
-	kcb->prev_kprobe.status = kcb->kprobe_status;
-	kcb->prev_kprobe.kprobe_saved_imask = kcb->kprobe_saved_imask;
-	memcpy(kcb->prev_kprobe.kprobe_saved_ctl, kcb->kprobe_saved_ctl,
-					sizeof(kcb->kprobe_saved_ctl));
+	/* Restore control regs and psw mask, set new psw address */
+	__ctl_load(kcb->kprobe_saved_ctl, 9, 11);
+	regs->psw.mask &= ~PSW_MASK_PER;
+	regs->psw.mask |= kcb->kprobe_saved_imask;
+	regs->psw.addr = ip | PSW_ADDR_AMODE;
 }
 
-static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
+/*
+ * Activate a kprobe by storing its pointer to current_kprobe. The
+ * previous kprobe is stored in kcb->prev_kprobe. A stack of up to
+ * two kprobes can be active, see KPROBE_REENTER.
+ */
+static void __kprobes push_kprobe(struct kprobe_ctlblk *kcb, struct kprobe *p)
 {
-	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
-	kcb->kprobe_status = kcb->prev_kprobe.status;
-	kcb->kprobe_saved_imask = kcb->prev_kprobe.kprobe_saved_imask;
-	memcpy(kcb->kprobe_saved_ctl, kcb->prev_kprobe.kprobe_saved_ctl,
-					sizeof(kcb->kprobe_saved_ctl));
+	kcb->prev_kprobe.kp = __get_cpu_var(current_kprobe);
+	kcb->prev_kprobe.status = kcb->kprobe_status;
+	__get_cpu_var(current_kprobe) = p;
 }
 
-static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
-						struct kprobe_ctlblk *kcb)
+/*
+ * Deactivate a kprobe by backing up to the previous state. If the
+ * current state is KPROBE_REENTER prev_kprobe.kp will be non-NULL,
+ * for any other state prev_kprobe.kp will be NULL.
+ */
+static void __kprobes pop_kprobe(struct kprobe_ctlblk *kcb)
 {
-	__get_cpu_var(current_kprobe) = p;
-	/* Save the interrupt and per flags */
-	kcb->kprobe_saved_imask = regs->psw.mask &
-	    (PSW_MASK_PER | PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK);
-	/* Save the control regs that govern PER */
-	__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
+	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	kcb->kprobe_status = kcb->prev_kprobe.status;
 }
 
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
@@ -250,81 +234,104 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 	ri->ret_addr = (kprobe_opcode_t *) regs->gprs[14];
 
 	/* Replace the return addr with trampoline addr */
-	regs->gprs[14] = (unsigned long)&kretprobe_trampoline;
+	regs->gprs[14] = (unsigned long) &kretprobe_trampoline;
+}
+
+static void __kprobes kprobe_reenter_check(struct kprobe_ctlblk *kcb,
+					   struct kprobe *p)
+{
+	switch (kcb->kprobe_status) {
+	case KPROBE_HIT_SSDONE:
+	case KPROBE_HIT_ACTIVE:
+		kprobes_inc_nmissed_count(p);
+		break;
+	case KPROBE_HIT_SS:
+	case KPROBE_REENTER:
+	default:
+		/*
+		 * A kprobe on the code path to single step an instruction
+		 * is a BUG. The code path resides in the .kprobes.text
+		 * section and is executed with interrupts disabled.
+		 */
+		printk(KERN_EMERG "Invalid kprobe detected at %p.\n", p->addr);
+		dump_kprobe(p);
+		BUG();
+	}
 }
 
 static int __kprobes kprobe_handler(struct pt_regs *regs)
 {
-	struct kprobe *p;
-	int ret = 0;
-	unsigned long *addr = (unsigned long *)
-		((regs->psw.addr & PSW_ADDR_INSN) - 2);
 	struct kprobe_ctlblk *kcb;
+	struct kprobe *p;
 
 	/*
-	 * We don't want to be preempted for the entire
-	 * duration of kprobe processing
+	 * We want to disable preemption for the entire duration of kprobe
+	 * processing. That includes the calls to the pre/post handlers
+	 * and single stepping the kprobe instruction.
 	 */
 	preempt_disable();
 	kcb = get_kprobe_ctlblk();
+	p = get_kprobe((void *)((regs->psw.addr & PSW_ADDR_INSN) - 2));
 
-	/* Check we're not actually recursing */
-	if (kprobe_running()) {
-		p = get_kprobe(addr);
-		if (p) {
-			if (kcb->kprobe_status == KPROBE_HIT_SS &&
-			    *p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
-				regs->psw.mask &= ~PSW_MASK_PER;
-				regs->psw.mask |= kcb->kprobe_saved_imask;
-				goto no_kprobe;
-			}
-			/* We have reentered the kprobe_handler(), since
-			 * another probe was hit while within the handler.
-			 * We here save the original kprobes variables and
-			 * just single step on the instruction of the new probe
-			 * without calling any user handlers.
+	if (p) {
+		if (kprobe_running()) {
+			/*
+			 * We have hit a kprobe while another is still
+			 * active. This can happen in the pre and post
+			 * handler. Single step the instruction of the
+			 * new probe but do not call any handler function
+			 * of this secondary kprobe.
+			 * push_kprobe and pop_kprobe saves and restores
+			 * the currently active kprobe.
 			 */
-			save_previous_kprobe(kcb);
-			set_current_kprobe(p, regs, kcb);
-			kprobes_inc_nmissed_count(p);
-			prepare_singlestep(p, regs);
+			kprobe_reenter_check(kcb, p);
+			push_kprobe(kcb, p);
 			kcb->kprobe_status = KPROBE_REENTER;
-			return 1;
 		} else {
-			p = __get_cpu_var(current_kprobe);
-			if (p->break_handler && p->break_handler(p, regs)) {
-				goto ss_probe;
-			}
+			/*
+			 * If we have no pre-handler or it returned 0, we
+			 * continue with single stepping. If we have a
+			 * pre-handler and it returned non-zero, it prepped
+			 * for calling the break_handler below on re-entry
+			 * for jprobe processing, so get out doing nothing
+			 * more here.
+			 */
+			push_kprobe(kcb, p);
+			kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+			if (p->pre_handler && p->pre_handler(p, regs))
+				return 1;
+			kcb->kprobe_status = KPROBE_HIT_SS;
 		}
-		goto no_kprobe;
-	}
-
-	p = get_kprobe(addr);
-	if (!p)
-		/*
-		 * No kprobe at this address. The fault has not been
-		 * caused by a kprobe breakpoint. The race of breakpoint
-		 * vs. kprobe remove does not exist because on s390 we
-		 * use stop_machine to arm/disarm the breakpoints.
-		 */
-		goto no_kprobe;
-
-	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-	set_current_kprobe(p, regs, kcb);
-	if (p->pre_handler && p->pre_handler(p, regs))
-		/* handler has already set things up, so skip ss setup */
+		enable_singlestep(kcb, regs, (unsigned long) p->ainsn.insn);
 		return 1;
-
-ss_probe:
-	if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
-		local_irq_disable();
-	prepare_singlestep(p, regs);
-	kcb->kprobe_status = KPROBE_HIT_SS;
-	return 1;
-
-no_kprobe:
+	} else if (kprobe_running()) {
+		p = __get_cpu_var(current_kprobe);
+		if (p->break_handler && p->break_handler(p, regs)) {
+			/*
+			 * Continuation after the jprobe completed and
+			 * caused the jprobe_return trap. The jprobe
+			 * break_handler "returns" to the original
+			 * function that still has the kprobe breakpoint
+			 * installed. We continue with single stepping.
+			 */
+			kcb->kprobe_status = KPROBE_HIT_SS;
+			enable_singlestep(kcb, regs,
+					  (unsigned long) p->ainsn.insn);
+			return 1;
+		} /* else:
+		   * No kprobe at this address and the current kprobe
+		   * has no break handler (no jprobe!). The kernel just
+		   * exploded, let the standard trap handler pick up the
+		   * pieces.
+		   */
+	} /* else:
+	   * No kprobe at this address and no active kprobe. The trap has
+	   * not been caused by a kprobe breakpoint. The race of breakpoint
+	   * vs. kprobe remove does not exist because on s390 as we use
+	   * stop_machine to arm/disarm the breakpoints.
+	   */
 	preempt_enable_no_resched();
-	return ret;
+	return 0;
 }
 
 /*
@@ -345,11 +352,12 @@ static void __used kretprobe_trampoline_holder(void)
 static int __kprobes trampoline_probe_handler(struct kprobe *p,
 					      struct pt_regs *regs)
 {
-	struct kretprobe_instance *ri = NULL;
+	struct kretprobe_instance *ri;
 	struct hlist_head *head, empty_rp;
 	struct hlist_node *node, *tmp;
-	unsigned long flags, orig_ret_address = 0;
-	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
+	unsigned long flags, orig_ret_address;
+	unsigned long trampoline_address;
+	kprobe_opcode_t *correct_ret_addr;
 
 	INIT_HLIST_HEAD(&empty_rp);
 	kretprobe_hash_lock(current, &head, &flags);
@@ -367,30 +375,55 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	 *	 real return address, and all the rest will point to
 	 *	 kretprobe_trampoline
 	 */
+	ri = NULL;
+	orig_ret_address = 0;
+	correct_ret_addr = NULL;
+	trampoline_address = (unsigned long) &kretprobe_trampoline;
 	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
 		if (ri->task != current)
 			/* another task is sharing our hash bucket */
 			continue;
 
-		if (ri->rp && ri->rp->handler)
+		orig_ret_address = (unsigned long) ri->ret_addr;
+
+		if (orig_ret_address != trampoline_address)
+			/*
+			 * This is the real return address. Any other
+			 * instances associated with this task are for
+			 * other calls deeper on the call stack
+			 */
+			break;
+	}
+
+	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
+	correct_ret_addr = ri->ret_addr;
+	hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
+		if (ri->task != current)
+			/* another task is sharing our hash bucket */
+			continue;
+
+		orig_ret_address = (unsigned long) ri->ret_addr;
+
+		if (ri->rp && ri->rp->handler) {
+			ri->ret_addr = correct_ret_addr;
 			ri->rp->handler(ri, regs);
+		}
 
-		orig_ret_address = (unsigned long)ri->ret_addr;
 		recycle_rp_inst(ri, &empty_rp);
 
-		if (orig_ret_address != trampoline_address) {
+		if (orig_ret_address != trampoline_address)
 			/*
 			 * This is the real return address. Any other
 			 * instances associated with this task are for
 			 * other calls deeper on the call stack
 			 */
 			break;
-		}
 	}
-	kretprobe_assert(ri, orig_ret_address, trampoline_address);
+
 	regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
 
-	reset_current_kprobe();
+	pop_kprobe(get_kprobe_ctlblk());
 	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
@@ -417,57 +450,42 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	unsigned long ip = regs->psw.addr & PSW_ADDR_INSN;
+	int fixup = get_fixup_type(p->ainsn.insn);
 
-	regs->psw.addr &= PSW_ADDR_INSN;
-
-	if (p->ainsn.fixup & FIXUP_PSW_NORMAL)
-		regs->psw.addr = (unsigned long)p->addr +
-				((unsigned long)regs->psw.addr -
-				 (unsigned long)p->ainsn.insn);
+	if (fixup & FIXUP_PSW_NORMAL)
+		ip += (unsigned long) p->addr - (unsigned long) p->ainsn.insn;
 
-	if (p->ainsn.fixup & FIXUP_BRANCH_NOT_TAKEN)
-		if ((unsigned long)regs->psw.addr -
-		    (unsigned long)p->ainsn.insn == p->ainsn.ilen)
-			regs->psw.addr = (unsigned long)p->addr + p->ainsn.ilen;
+	if (fixup & FIXUP_BRANCH_NOT_TAKEN) {
+		int ilen = ((p->ainsn.insn[0] >> 14) + 3) & -2;
+		if (ip - (unsigned long) p->ainsn.insn == ilen)
+			ip = (unsigned long) p->addr + ilen;
+	}
 
-	if (p->ainsn.fixup & FIXUP_RETURN_REGISTER)
-		regs->gprs[p->ainsn.reg] = ((unsigned long)p->addr +
-						(regs->gprs[p->ainsn.reg] -
-						(unsigned long)p->ainsn.insn))
-						| PSW_ADDR_AMODE;
+	if (fixup & FIXUP_RETURN_REGISTER) {
+		int reg = (p->ainsn.insn[0] & 0xf0) >> 4;
+		regs->gprs[reg] += (unsigned long) p->addr -
+				   (unsigned long) p->ainsn.insn;
+	}
 
-	regs->psw.addr |= PSW_ADDR_AMODE;
-	/* turn off PER mode */
-	regs->psw.mask &= ~PSW_MASK_PER;
-	/* Restore the original per control regs */
-	__ctl_load(kcb->kprobe_saved_ctl, 9, 11);
-	regs->psw.mask |= kcb->kprobe_saved_imask;
+	disable_singlestep(kcb, regs, ip);
 }
 
 static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 {
-	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	struct kprobe *p = kprobe_running();
 
-	if (!cur)
+	if (!p)
 		return 0;
 
-	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
+	if (kcb->kprobe_status != KPROBE_REENTER && p->post_handler) {
 		kcb->kprobe_status = KPROBE_HIT_SSDONE;
-		cur->post_handler(cur, regs, 0);
+		p->post_handler(p, regs, 0);
 	}
 
-	resume_execution(cur, regs);
-
-	/*Restore back the original saved kprobes variables and continue. */
-	if (kcb->kprobe_status == KPROBE_REENTER) {
-		restore_previous_kprobe(kcb);
-		goto out;
-	}
-	reset_current_kprobe();
-	if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
-		local_irq_enable();
-out:
+	resume_execution(p, regs);
+	pop_kprobe(kcb);
 	preempt_enable_no_resched();
 
 	/*
@@ -475,17 +493,16 @@ out:
 	 * will have PER set, in which case, continue the remaining processing
 	 * of do_single_step, as if this is not a probe hit.
 	 */
-	if (regs->psw.mask & PSW_MASK_PER) {
+	if (regs->psw.mask & PSW_MASK_PER)
 		return 0;
-	}
 
 	return 1;
 }
 
-int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+static int __kprobes kprobe_trap_handler(struct pt_regs *regs, int trapnr)
 {
-	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	struct kprobe *p = kprobe_running();
 	const struct exception_table_entry *entry;
 
 	switch(kcb->kprobe_status) {
@@ -501,16 +518,8 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 		 * and allow the page fault handler to continue as a
 		 * normal page fault.
 		 */
-		regs->psw.addr = (unsigned long)cur->addr | PSW_ADDR_AMODE;
-		regs->psw.mask &= ~PSW_MASK_PER;
-		regs->psw.mask |= kcb->kprobe_saved_imask;
-		if (kcb->kprobe_status == KPROBE_REENTER)
-			restore_previous_kprobe(kcb);
-		else {
-			reset_current_kprobe();
-			if (regs->psw.mask & (PSW_MASK_PER | PSW_MASK_IO))
-				local_irq_enable();
-		}
+		disable_singlestep(kcb, regs, (unsigned long) p->addr);
+		pop_kprobe(kcb);
 		preempt_enable_no_resched();
 		break;
 	case KPROBE_HIT_ACTIVE:
@@ -520,7 +529,7 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 		 * we can also use npre/npostfault count for accouting
 		 * these specific fault cases.
 		 */
-		kprobes_inc_nmissed_count(cur);
+		kprobes_inc_nmissed_count(p);
 
 		/*
 		 * We come here because instructions in the pre/post
@@ -529,7 +538,7 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 		 * copy_from_user(), get_user() etc. Let the
 		 * user-specified handler try to fix it first.
 		 */
-		if (cur->fault_handler && cur->fault_handler(cur, regs, trapnr))
+		if (p->fault_handler && p->fault_handler(p, regs, trapnr))
 			return 1;
 
 		/*
@@ -553,57 +562,71 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 	return 0;
 }
 
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
+{
+	int ret;
+
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_disable();
+	ret = kprobe_trap_handler(regs, trapnr);
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_restore(regs->psw.mask & ~PSW_MASK_PER);
+	return ret;
+}
+
 /*
  * Wrapper routine to for handling exceptions.
  */
 int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 				       unsigned long val, void *data)
 {
-	struct die_args *args = (struct die_args *)data;
+	struct die_args *args = (struct die_args *) data;
+	struct pt_regs *regs = args->regs;
 	int ret = NOTIFY_DONE;
 
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_disable();
+
 	switch (val) {
 	case DIE_BPT:
-		if (kprobe_handler(args->regs))
+		if (kprobe_handler(regs))
 			ret = NOTIFY_STOP;
 		break;
 	case DIE_SSTEP:
-		if (post_kprobe_handler(args->regs))
+		if (post_kprobe_handler(regs))
 			ret = NOTIFY_STOP;
 		break;
 	case DIE_TRAP:
-		/* kprobe_running() needs smp_processor_id() */
-		preempt_disable();
-		if (kprobe_running() &&
-		    kprobe_fault_handler(args->regs, args->trapnr))
+		if (!preemptible() && kprobe_running() &&
+		    kprobe_trap_handler(regs, args->trapnr))
 			ret = NOTIFY_STOP;
-		preempt_enable();
 		break;
 	default:
 		break;
 	}
+
+	if (regs->psw.mask & (PSW_MASK_IO | PSW_MASK_EXT))
+		local_irq_restore(regs->psw.mask & ~PSW_MASK_PER);
+
 	return ret;
 }
 
 int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
-	unsigned long addr;
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+	unsigned long stack;
 
 	memcpy(&kcb->jprobe_saved_regs, regs, sizeof(struct pt_regs));
 
 	/* setup return addr to the jprobe handler routine */
-	regs->psw.addr = (unsigned long)(jp->entry) | PSW_ADDR_AMODE;
+	regs->psw.addr = (unsigned long) jp->entry | PSW_ADDR_AMODE;
+	regs->psw.mask &= ~(PSW_MASK_IO | PSW_MASK_EXT);
 
-	/* r14 is the function return address */
-	kcb->jprobe_saved_r14 = (unsigned long)regs->gprs[14];
 	/* r15 is the stack pointer */
-	kcb->jprobe_saved_r15 = (unsigned long)regs->gprs[15];
-	addr = (unsigned long)kcb->jprobe_saved_r15;
+	stack = (unsigned long) regs->gprs[15];
 
-	memcpy(kcb->jprobes_stack, (kprobe_opcode_t *) addr,
-	       MIN_STACK_SIZE(addr));
+	memcpy(kcb->jprobes_stack, (void *) stack, MIN_STACK_SIZE(stack));
 	return 1;
 }
 
@@ -620,30 +643,29 @@ void __kprobes jprobe_return_end(void)
 int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
-	unsigned long stack_addr = (unsigned long)(kcb->jprobe_saved_r15);
+	unsigned long stack;
+
+	stack = (unsigned long) kcb->jprobe_saved_regs.gprs[15];
 
 	/* Put the regs back */
 	memcpy(regs, &kcb->jprobe_saved_regs, sizeof(struct pt_regs));
 	/* put the stack back */
-	memcpy((kprobe_opcode_t *) stack_addr, kcb->jprobes_stack,
-	       MIN_STACK_SIZE(stack_addr));
+	memcpy((void *) stack, kcb->jprobes_stack, MIN_STACK_SIZE(stack));
 	preempt_enable_no_resched();
 	return 1;
 }
 
-static struct kprobe trampoline_p = {
-	.addr = (kprobe_opcode_t *) & kretprobe_trampoline,
+static struct kprobe trampoline = {
+	.addr = (kprobe_opcode_t *) &kretprobe_trampoline,
 	.pre_handler = trampoline_probe_handler
 };
 
 int __init arch_init_kprobes(void)
 {
-	return register_kprobe(&trampoline_p);
+	return register_kprobe(&trampoline);
 }
 
 int __kprobes arch_trampoline_kprobe(struct kprobe *p)
 {
-	if (p->addr == (kprobe_opcode_t *) & kretprobe_trampoline)
-		return 1;
-	return 0;
+	return p->addr == (kprobe_opcode_t *) &kretprobe_trampoline;
 }
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index dfe015d7398..1e6a5579562 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -7,6 +7,8 @@
 
 #include <asm/asm-offsets.h>
 
+	.section .kprobes.text, "ax"
+
 	.globl ftrace_stub
 ftrace_stub:
 	br	%r14
@@ -16,22 +18,12 @@ _mcount:
 #ifdef CONFIG_DYNAMIC_FTRACE
 	br	%r14
 
-	.data
-	.globl	ftrace_dyn_func
-ftrace_dyn_func:
-	.long	ftrace_stub
-	.previous
-
 	.globl ftrace_caller
 ftrace_caller:
 #endif
 	stm	%r2,%r5,16(%r15)
 	bras	%r1,2f
-#ifdef CONFIG_DYNAMIC_FTRACE
-0:	.long	ftrace_dyn_func
-#else
 0:	.long	ftrace_trace_function
-#endif
 1:	.long	function_trace_stop
 2:	l	%r2,1b-0b(%r1)
 	icm	%r2,0xf,0(%r2)
@@ -47,21 +39,15 @@ ftrace_caller:
 	l	%r14,0(%r14)
 	basr	%r14,%r14
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-#ifdef CONFIG_DYNAMIC_FTRACE
+	l	%r2,100(%r15)
+	l	%r3,152(%r15)
 	.globl	ftrace_graph_caller
 ftrace_graph_caller:
-	# This unconditional branch gets runtime patched. Change only if
-	# you know what you are doing. See ftrace_enable_graph_caller().
-	j	1f
-#endif
-	bras	%r1,0f
-	.long	prepare_ftrace_return
-0:	l	%r2,152(%r15)
-	l	%r4,0(%r1)
-	l	%r3,100(%r15)
-	basr	%r14,%r4
-	st	%r2,100(%r15)
-1:
+# The bras instruction gets runtime patched to call prepare_ftrace_return.
+# See ftrace_enable_ftrace_graph_caller. The patched instruction is:
+#	bras	%r14,prepare_ftrace_return
+	bras	%r14,0f
+0:	st	%r2,100(%r15)
 #endif
 	ahi	%r15,96
 	l	%r14,56(%r15)
diff --git a/arch/s390/kernel/mcount64.S b/arch/s390/kernel/mcount64.S
index c37211c6092..e73667286ac 100644
--- a/arch/s390/kernel/mcount64.S
+++ b/arch/s390/kernel/mcount64.S
@@ -7,6 +7,8 @@
 
 #include <asm/asm-offsets.h>
 
+	.section .kprobes.text, "ax"
+
 	.globl ftrace_stub
 ftrace_stub:
 	br	%r14
@@ -16,12 +18,6 @@ _mcount:
 #ifdef CONFIG_DYNAMIC_FTRACE
 	br	%r14
 
-	.data
-	.globl	ftrace_dyn_func
-ftrace_dyn_func:
-	.quad	ftrace_stub
-	.previous
-
 	.globl ftrace_caller
 ftrace_caller:
 #endif
@@ -35,26 +31,19 @@ ftrace_caller:
 	stg	%r1,__SF_BACKCHAIN(%r15)
 	lgr	%r2,%r14
 	lg	%r3,168(%r15)
-#ifdef CONFIG_DYNAMIC_FTRACE
-	larl	%r14,ftrace_dyn_func
-#else
 	larl	%r14,ftrace_trace_function
-#endif
 	lg	%r14,0(%r14)
 	basr	%r14,%r14
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-#ifdef CONFIG_DYNAMIC_FTRACE
+	lg	%r2,168(%r15)
+	lg	%r3,272(%r15)
 	.globl	ftrace_graph_caller
 ftrace_graph_caller:
-	# This unconditional branch gets runtime patched. Change only if
-	# you know what you are doing. See ftrace_enable_graph_caller().
-	j	0f
-#endif
-	lg	%r2,272(%r15)
-	lg	%r3,168(%r15)
-	brasl	%r14,prepare_ftrace_return
-	stg	%r2,168(%r15)
-0:
+# The bras instruction gets runtime patched to call prepare_ftrace_return.
+# See ftrace_enable_ftrace_graph_caller. The patched instruction is:
+#	bras	%r14,prepare_ftrace_return
+	bras	%r14,0f
+0:	stg	%r2,168(%r15)
 #endif
 	aghi	%r15,160
 	lmg	%r2,%r5,32(%r15)
diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c
index ac151399ef3..fab88431a06 100644
--- a/arch/s390/kernel/nmi.c
+++ b/arch/s390/kernel/nmi.c
@@ -8,6 +8,7 @@
  *		 Heiko Carstens <heiko.carstens@de.ibm.com>,
  */
 
+#include <linux/kernel_stat.h>
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/hardirq.h>
@@ -95,7 +96,6 @@ EXPORT_SYMBOL_GPL(s390_handle_mcck);
 static int notrace s390_revalidate_registers(struct mci *mci)
 {
 	int kill_task;
-	u64 tmpclock;
 	u64 zero;
 	void *fpt_save_area, *fpt_creg_save_area;
 
@@ -214,11 +214,10 @@ static int notrace s390_revalidate_registers(struct mci *mci)
 			: "0", "cc");
 #endif
 	/* Revalidate clock comparator register */
-	asm volatile(
-		"	stck	0(%1)\n"
-		"	sckc	0(%1)"
-		: "=m" (tmpclock) : "a" (&(tmpclock)) : "cc", "memory");
-
+	if (S390_lowcore.clock_comparator == -1)
+		set_clock_comparator(S390_lowcore.mcck_clock);
+	else
+		set_clock_comparator(S390_lowcore.clock_comparator);
 	/* Check if old PSW is valid */
 	if (!mci->wp)
 		/*
@@ -257,7 +256,7 @@ void notrace s390_do_machine_check(struct pt_regs *regs)
 	nmi_enter();
 	s390_idle_check(regs, S390_lowcore.mcck_clock,
 			S390_lowcore.mcck_enter_timer);
-
+	kstat_cpu(smp_processor_id()).irqs[NMI_NMI]++;
 	mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
 	mcck = &__get_cpu_var(cpu_mcck);
 	umode = user_mode(regs);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index ec2e03b22ea..6ba42222b54 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -32,6 +32,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/syscalls.h>
 #include <linux/compat.h>
+#include <linux/kprobes.h>
 #include <asm/compat.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -41,6 +42,7 @@
 #include <asm/irq.h>
 #include <asm/timer.h>
 #include <asm/nmi.h>
+#include <asm/smp.h>
 #include "entry.h"
 
 asmlinkage void ret_from_fork(void) asm ("ret_from_fork");
@@ -75,13 +77,8 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
  */
 static void default_idle(void)
 {
-	/* CPU is going idle. */
-#ifdef CONFIG_HOTPLUG_CPU
-	if (cpu_is_offline(smp_processor_id())) {
-		preempt_enable_no_resched();
+	if (cpu_is_offline(smp_processor_id()))
 		cpu_die();
-	}
-#endif
 	local_irq_disable();
 	if (need_resched()) {
 		local_irq_enable();
@@ -116,15 +113,17 @@ void cpu_idle(void)
 	}
 }
 
-extern void kernel_thread_starter(void);
+extern void __kprobes kernel_thread_starter(void);
 
 asm(
-	".align 4\n"
+	".section .kprobes.text, \"ax\"\n"
+	".global kernel_thread_starter\n"
 	"kernel_thread_starter:\n"
 	"    la    2,0(10)\n"
 	"    basr  14,9\n"
 	"    la    2,0\n"
-	"    br    11\n");
+	"    br    11\n"
+	".previous\n");
 
 int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 {
@@ -214,8 +213,10 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 	/* start new process with ar4 pointing to the correct address space */
 	p->thread.mm_segment = get_fs();
 	/* Don't copy debug registers */
-	memset(&p->thread.per_info, 0, sizeof(p->thread.per_info));
+	memset(&p->thread.per_user, 0, sizeof(p->thread.per_user));
+	memset(&p->thread.per_event, 0, sizeof(p->thread.per_event));
 	clear_tsk_thread_flag(p, TIF_SINGLE_STEP);
+	clear_tsk_thread_flag(p, TIF_PER_TRAP);
 	/* Initialize per thread user and system timer values */
 	ti = task_thread_info(p);
 	ti->user_timer = 0;
diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c
index 644548e615c..311e9d71288 100644
--- a/arch/s390/kernel/processor.c
+++ b/arch/s390/kernel/processor.c
@@ -13,7 +13,7 @@
 #include <linux/smp.h>
 #include <linux/seq_file.h>
 #include <linux/delay.h>
-
+#include <linux/cpu.h>
 #include <asm/elf.h>
 #include <asm/lowcore.h>
 #include <asm/param.h>
@@ -35,17 +35,6 @@ void __cpuinit cpu_init(void)
 }
 
 /*
- * print_cpu_info - print basic information about a cpu
- */
-void __cpuinit print_cpu_info(void)
-{
-	struct cpuid *id = &per_cpu(cpu_id, smp_processor_id());
-
-	pr_info("Processor %d started, address %d, identification %06X\n",
-		S390_lowcore.cpu_nr, stap(), id->ident);
-}
-
-/*
  * show_cpuinfo - Get information on one CPU for use by procfs.
  */
 static int show_cpuinfo(struct seq_file *m, void *v)
@@ -57,9 +46,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	unsigned long n = (unsigned long) v - 1;
 	int i;
 
-	s390_adjust_jiffies();
-	preempt_disable();
 	if (!n) {
+		s390_adjust_jiffies();
 		seq_printf(m, "vendor_id       : IBM/S390\n"
 			   "# processors    : %i\n"
 			   "bogomips per cpu: %lu.%02lu\n",
@@ -71,7 +59,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 				seq_printf(m, "%s ", hwcap_str[i]);
 		seq_puts(m, "\n");
 	}
-
+	get_online_cpus();
 	if (cpu_online(n)) {
 		struct cpuid *id = &per_cpu(cpu_id, n);
 		seq_printf(m, "processor %li: "
@@ -80,7 +68,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			   "machine = %04X\n",
 			   n, id->version, id->ident, id->machine);
 	}
-	preempt_enable();
+	put_online_cpus();
 	return 0;
 }
 
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 019bb714db4..ef86ad24398 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -1,25 +1,9 @@
 /*
- *  arch/s390/kernel/ptrace.c
+ *  Ptrace user space interface.
  *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
+ *    Copyright IBM Corp. 1999,2010
+ *    Author(s): Denis Joseph Barrow
  *               Martin Schwidefsky (schwidefsky@de.ibm.com)
- *
- *  Based on PowerPC version 
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Derived from "arch/m68k/kernel/ptrace.c"
- *  Copyright (C) 1994 by Hamish Macdonald
- *  Taken from linux/kernel/ptrace.c and modified for M680x0.
- *  linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu) 
- *
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file README.legal in the main directory of
- * this archive for more details.
  */
 
 #include <linux/kernel.h>
@@ -61,76 +45,58 @@ enum s390_regset {
 	REGSET_GENERAL_EXTENDED,
 };
 
-static void
-FixPerRegisters(struct task_struct *task)
+void update_per_regs(struct task_struct *task)
 {
-	struct pt_regs *regs;
-	per_struct *per_info;
-	per_cr_words cr_words;
-
-	regs = task_pt_regs(task);
-	per_info = (per_struct *) &task->thread.per_info;
-	per_info->control_regs.bits.em_instruction_fetch =
-		per_info->single_step | per_info->instruction_fetch;
-	
-	if (per_info->single_step) {
-		per_info->control_regs.bits.starting_addr = 0;
-#ifdef CONFIG_COMPAT
-		if (is_compat_task())
-			per_info->control_regs.bits.ending_addr = 0x7fffffffUL;
-		else
-#endif
-			per_info->control_regs.bits.ending_addr = PSW_ADDR_INSN;
-	} else {
-		per_info->control_regs.bits.starting_addr =
-			per_info->starting_addr;
-		per_info->control_regs.bits.ending_addr =
-			per_info->ending_addr;
-	}
-	/*
-	 * if any of the control reg tracing bits are on 
-	 * we switch on per in the psw
-	 */
-	if (per_info->control_regs.words.cr[0] & PER_EM_MASK)
-		regs->psw.mask |= PSW_MASK_PER;
-	else
+	static const struct per_regs per_single_step = {
+		.control = PER_EVENT_IFETCH,
+		.start = 0,
+		.end = PSW_ADDR_INSN,
+	};
+	struct pt_regs *regs = task_pt_regs(task);
+	struct thread_struct *thread = &task->thread;
+	const struct per_regs *new;
+	struct per_regs old;
+
+	/* TIF_SINGLE_STEP overrides the user specified PER registers. */
+	new = test_tsk_thread_flag(task, TIF_SINGLE_STEP) ?
+		&per_single_step : &thread->per_user;
+
+	/* Take care of the PER enablement bit in the PSW. */
+	if (!(new->control & PER_EVENT_MASK)) {
 		regs->psw.mask &= ~PSW_MASK_PER;
-
-	if (per_info->control_regs.bits.em_storage_alteration)
-		per_info->control_regs.bits.storage_alt_space_ctl = 1;
-	else
-		per_info->control_regs.bits.storage_alt_space_ctl = 0;
-
-	if (task == current) {
-		__ctl_store(cr_words, 9, 11);
-		if (memcmp(&cr_words, &per_info->control_regs.words,
-			   sizeof(cr_words)) != 0)
-			__ctl_load(per_info->control_regs.words, 9, 11);
+		return;
 	}
+	regs->psw.mask |= PSW_MASK_PER;
+	__ctl_store(old, 9, 11);
+	if (memcmp(new, &old, sizeof(struct per_regs)) != 0)
+		__ctl_load(*new, 9, 11);
 }
 
 void user_enable_single_step(struct task_struct *task)
 {
-	task->thread.per_info.single_step = 1;
-	FixPerRegisters(task);
+	set_tsk_thread_flag(task, TIF_SINGLE_STEP);
+	if (task == current)
+		update_per_regs(task);
 }
 
 void user_disable_single_step(struct task_struct *task)
 {
-	task->thread.per_info.single_step = 0;
-	FixPerRegisters(task);
+	clear_tsk_thread_flag(task, TIF_SINGLE_STEP);
+	if (task == current)
+		update_per_regs(task);
 }
 
 /*
  * Called by kernel/ptrace.c when detaching..
  *
- * Make sure single step bits etc are not set.
+ * Clear all debugging related fields.
  */
-void
-ptrace_disable(struct task_struct *child)
+void ptrace_disable(struct task_struct *task)
 {
-	/* make sure the single step bit is not set. */
-	user_disable_single_step(child);
+	memset(&task->thread.per_user, 0, sizeof(task->thread.per_user));
+	memset(&task->thread.per_event, 0, sizeof(task->thread.per_event));
+	clear_tsk_thread_flag(task, TIF_SINGLE_STEP);
+	clear_tsk_thread_flag(task, TIF_PER_TRAP);
 }
 
 #ifndef CONFIG_64BIT
@@ -139,6 +105,47 @@ ptrace_disable(struct task_struct *child)
 # define __ADDR_MASK 7
 #endif
 
+static inline unsigned long __peek_user_per(struct task_struct *child,
+					    addr_t addr)
+{
+	struct per_struct_kernel *dummy = NULL;
+
+	if (addr == (addr_t) &dummy->cr9)
+		/* Control bits of the active per set. */
+		return test_thread_flag(TIF_SINGLE_STEP) ?
+			PER_EVENT_IFETCH : child->thread.per_user.control;
+	else if (addr == (addr_t) &dummy->cr10)
+		/* Start address of the active per set. */
+		return test_thread_flag(TIF_SINGLE_STEP) ?
+			0 : child->thread.per_user.start;
+	else if (addr == (addr_t) &dummy->cr11)
+		/* End address of the active per set. */
+		return test_thread_flag(TIF_SINGLE_STEP) ?
+			PSW_ADDR_INSN : child->thread.per_user.end;
+	else if (addr == (addr_t) &dummy->bits)
+		/* Single-step bit. */
+		return test_thread_flag(TIF_SINGLE_STEP) ?
+			(1UL << (BITS_PER_LONG - 1)) : 0;
+	else if (addr == (addr_t) &dummy->starting_addr)
+		/* Start address of the user specified per set. */
+		return child->thread.per_user.start;
+	else if (addr == (addr_t) &dummy->ending_addr)
+		/* End address of the user specified per set. */
+		return child->thread.per_user.end;
+	else if (addr == (addr_t) &dummy->perc_atmid)
+		/* PER code, ATMID and AI of the last PER trap */
+		return (unsigned long)
+			child->thread.per_event.cause << (BITS_PER_LONG - 16);
+	else if (addr == (addr_t) &dummy->address)
+		/* Address of the last PER trap */
+		return child->thread.per_event.address;
+	else if (addr == (addr_t) &dummy->access_id)
+		/* Access id of the last PER trap */
+		return (unsigned long)
+			child->thread.per_event.paid << (BITS_PER_LONG - 8);
+	return 0;
+}
+
 /*
  * Read the word at offset addr from the user area of a process. The
  * trouble here is that the information is littered over different
@@ -204,10 +211,10 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr)
 
 	} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
 		/*
-		 * per_info is found in the thread structure
+		 * Handle access to the per_info structure.
 		 */
-		offset = addr - (addr_t) &dummy->regs.per_info;
-		tmp = *(addr_t *)((addr_t) &child->thread.per_info + offset);
+		addr -= (addr_t) &dummy->regs.per_info;
+		tmp = __peek_user_per(child, addr);
 
 	} else
 		tmp = 0;
@@ -237,6 +244,35 @@ peek_user(struct task_struct *child, addr_t addr, addr_t data)
 	return put_user(tmp, (addr_t __user *) data);
 }
 
+static inline void __poke_user_per(struct task_struct *child,
+				   addr_t addr, addr_t data)
+{
+	struct per_struct_kernel *dummy = NULL;
+
+	/*
+	 * There are only three fields in the per_info struct that the
+	 * debugger user can write to.
+	 * 1) cr9: the debugger wants to set a new PER event mask
+	 * 2) starting_addr: the debugger wants to set a new starting
+	 *    address to use with the PER event mask.
+	 * 3) ending_addr: the debugger wants to set a new ending
+	 *    address to use with the PER event mask.
+	 * The user specified PER event mask and the start and end
+	 * addresses are used only if single stepping is not in effect.
+	 * Writes to any other field in per_info are ignored.
+	 */
+	if (addr == (addr_t) &dummy->cr9)
+		/* PER event mask of the user specified per set. */
+		child->thread.per_user.control =
+			data & (PER_EVENT_MASK | PER_CONTROL_MASK);
+	else if (addr == (addr_t) &dummy->starting_addr)
+		/* Starting address of the user specified per set. */
+		child->thread.per_user.start = data;
+	else if (addr == (addr_t) &dummy->ending_addr)
+		/* Ending address of the user specified per set. */
+		child->thread.per_user.end = data;
+}
+
 /*
  * Write a word to the user area of a process at location addr. This
  * operation does have an additional problem compared to peek_user.
@@ -311,19 +347,17 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 
 	} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
 		/*
-		 * per_info is found in the thread structure 
+		 * Handle access to the per_info structure.
 		 */
-		offset = addr - (addr_t) &dummy->regs.per_info;
-		*(addr_t *)((addr_t) &child->thread.per_info + offset) = data;
+		addr -= (addr_t) &dummy->regs.per_info;
+		__poke_user_per(child, addr, data);
 
 	}
 
-	FixPerRegisters(child);
 	return 0;
 }
 
-static int
-poke_user(struct task_struct *child, addr_t addr, addr_t data)
+static int poke_user(struct task_struct *child, addr_t addr, addr_t data)
 {
 	addr_t mask;
 
@@ -410,12 +444,53 @@ long arch_ptrace(struct task_struct *child, long request,
  */
 
 /*
+ * Same as peek_user_per but for a 31 bit program.
+ */
+static inline __u32 __peek_user_per_compat(struct task_struct *child,
+					   addr_t addr)
+{
+	struct compat_per_struct_kernel *dummy32 = NULL;
+
+	if (addr == (addr_t) &dummy32->cr9)
+		/* Control bits of the active per set. */
+		return (__u32) test_thread_flag(TIF_SINGLE_STEP) ?
+			PER_EVENT_IFETCH : child->thread.per_user.control;
+	else if (addr == (addr_t) &dummy32->cr10)
+		/* Start address of the active per set. */
+		return (__u32) test_thread_flag(TIF_SINGLE_STEP) ?
+			0 : child->thread.per_user.start;
+	else if (addr == (addr_t) &dummy32->cr11)
+		/* End address of the active per set. */
+		return test_thread_flag(TIF_SINGLE_STEP) ?
+			PSW32_ADDR_INSN : child->thread.per_user.end;
+	else if (addr == (addr_t) &dummy32->bits)
+		/* Single-step bit. */
+		return (__u32) test_thread_flag(TIF_SINGLE_STEP) ?
+			0x80000000 : 0;
+	else if (addr == (addr_t) &dummy32->starting_addr)
+		/* Start address of the user specified per set. */
+		return (__u32) child->thread.per_user.start;
+	else if (addr == (addr_t) &dummy32->ending_addr)
+		/* End address of the user specified per set. */
+		return (__u32) child->thread.per_user.end;
+	else if (addr == (addr_t) &dummy32->perc_atmid)
+		/* PER code, ATMID and AI of the last PER trap */
+		return (__u32) child->thread.per_event.cause << 16;
+	else if (addr == (addr_t) &dummy32->address)
+		/* Address of the last PER trap */
+		return (__u32) child->thread.per_event.address;
+	else if (addr == (addr_t) &dummy32->access_id)
+		/* Access id of the last PER trap */
+		return (__u32) child->thread.per_event.paid << 24;
+	return 0;
+}
+
+/*
  * Same as peek_user but for a 31 bit program.
  */
 static u32 __peek_user_compat(struct task_struct *child, addr_t addr)
 {
-	struct user32 *dummy32 = NULL;
-	per_struct32 *dummy_per32 = NULL;
+	struct compat_user *dummy32 = NULL;
 	addr_t offset;
 	__u32 tmp;
 
@@ -465,19 +540,10 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr)
 
 	} else if (addr < (addr_t) (&dummy32->regs.per_info + 1)) {
 		/*
-		 * per_info is found in the thread structure
+		 * Handle access to the per_info structure.
 		 */
-		offset = addr - (addr_t) &dummy32->regs.per_info;
-		/* This is magic. See per_struct and per_struct32. */
-		if ((offset >= (addr_t) &dummy_per32->control_regs &&
-		     offset < (addr_t) (&dummy_per32->control_regs + 1)) ||
-		    (offset >= (addr_t) &dummy_per32->starting_addr &&
-		     offset <= (addr_t) &dummy_per32->ending_addr) ||
-		    offset == (addr_t) &dummy_per32->lowcore.words.address)
-			offset = offset*2 + 4;
-		else
-			offset = offset*2;
-		tmp = *(__u32 *)((addr_t) &child->thread.per_info + offset);
+		addr -= (addr_t) &dummy32->regs.per_info;
+		tmp = __peek_user_per_compat(child, addr);
 
 	} else
 		tmp = 0;
@@ -498,13 +564,32 @@ static int peek_user_compat(struct task_struct *child,
 }
 
 /*
+ * Same as poke_user_per but for a 31 bit program.
+ */
+static inline void __poke_user_per_compat(struct task_struct *child,
+					  addr_t addr, __u32 data)
+{
+	struct compat_per_struct_kernel *dummy32 = NULL;
+
+	if (addr == (addr_t) &dummy32->cr9)
+		/* PER event mask of the user specified per set. */
+		child->thread.per_user.control =
+			data & (PER_EVENT_MASK | PER_CONTROL_MASK);
+	else if (addr == (addr_t) &dummy32->starting_addr)
+		/* Starting address of the user specified per set. */
+		child->thread.per_user.start = data;
+	else if (addr == (addr_t) &dummy32->ending_addr)
+		/* Ending address of the user specified per set. */
+		child->thread.per_user.end = data;
+}
+
+/*
  * Same as poke_user but for a 31 bit program.
  */
 static int __poke_user_compat(struct task_struct *child,
 			      addr_t addr, addr_t data)
 {
-	struct user32 *dummy32 = NULL;
-	per_struct32 *dummy_per32 = NULL;
+	struct compat_user *dummy32 = NULL;
 	__u32 tmp = (__u32) data;
 	addr_t offset;
 
@@ -561,37 +646,20 @@ static int __poke_user_compat(struct task_struct *child,
 
 	} else if (addr < (addr_t) (&dummy32->regs.per_info + 1)) {
 		/*
-		 * per_info is found in the thread structure.
-		 */
-		offset = addr - (addr_t) &dummy32->regs.per_info;
-		/*
-		 * This is magic. See per_struct and per_struct32.
-		 * By incident the offsets in per_struct are exactly
-		 * twice the offsets in per_struct32 for all fields.
-		 * The 8 byte fields need special handling though,
-		 * because the second half (bytes 4-7) is needed and
-		 * not the first half.
+		 * Handle access to the per_info structure.
 		 */
-		if ((offset >= (addr_t) &dummy_per32->control_regs &&
-		     offset < (addr_t) (&dummy_per32->control_regs + 1)) ||
-		    (offset >= (addr_t) &dummy_per32->starting_addr &&
-		     offset <= (addr_t) &dummy_per32->ending_addr) ||
-		    offset == (addr_t) &dummy_per32->lowcore.words.address)
-			offset = offset*2 + 4;
-		else
-			offset = offset*2;
-		*(__u32 *)((addr_t) &child->thread.per_info + offset) = tmp;
-
+		addr -= (addr_t) &dummy32->regs.per_info;
+		__poke_user_per_compat(child, addr, data);
 	}
 
-	FixPerRegisters(child);
 	return 0;
 }
 
 static int poke_user_compat(struct task_struct *child,
 			    addr_t addr, addr_t data)
 {
-	if (!is_compat_task() || (addr & 3) || addr > sizeof(struct user32) - 3)
+	if (!is_compat_task() || (addr & 3) ||
+	    addr > sizeof(struct compat_user) - 3)
 		return -EIO;
 
 	return __poke_user_compat(child, addr, data);
@@ -602,7 +670,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 {
 	unsigned long addr = caddr;
 	unsigned long data = cdata;
-	ptrace_area_emu31 parea; 
+	compat_ptrace_area parea;
 	int copied, ret;
 
 	switch (request) {
diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c
index bd1db508e8a..185029919c4 100644
--- a/arch/s390/kernel/s390_ext.c
+++ b/arch/s390/kernel/s390_ext.c
@@ -1,33 +1,36 @@
 /*
- *  arch/s390/kernel/s390_ext.c
- *
- *  S390 version
- *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
- *    Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com),
- *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *    Copyright IBM Corp. 1999,2010
+ *    Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>,
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>,
  */
 
+#include <linux/kernel_stat.h>
+#include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/slab.h>
 #include <linux/ftrace.h>
 #include <linux/errno.h>
-#include <linux/kernel_stat.h>
-#include <linux/interrupt.h>
-#include <asm/cputime.h>
-#include <asm/lowcore.h>
+#include <linux/slab.h>
 #include <asm/s390_ext.h>
 #include <asm/irq_regs.h>
+#include <asm/cputime.h>
+#include <asm/lowcore.h>
 #include <asm/irq.h>
 #include "entry.h"
 
+struct ext_int_info {
+	struct ext_int_info *next;
+	ext_int_handler_t handler;
+	__u16 code;
+};
+
 /*
  * ext_int_hash[index] is the start of the list for all external interrupts
  * that hash to this index. With the current set of external interrupts 
  * (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000
  * iucv and 0x2603 pfault) this is always the first element. 
  */
-ext_int_info_t *ext_int_hash[256] = { NULL, };
+static struct ext_int_info *ext_int_hash[256];
 
 static inline int ext_hash(__u16 code)
 {
@@ -36,90 +39,53 @@ static inline int ext_hash(__u16 code)
 
 int register_external_interrupt(__u16 code, ext_int_handler_t handler)
 {
-        ext_int_info_t *p;
-        int index;
-
-	p = kmalloc(sizeof(ext_int_info_t), GFP_ATOMIC);
-        if (p == NULL)
-                return -ENOMEM;
-        p->code = code;
-        p->handler = handler;
-	index = ext_hash(code);
-        p->next = ext_int_hash[index];
-        ext_int_hash[index] = p;
-        return 0;
-}
-
-int register_early_external_interrupt(__u16 code, ext_int_handler_t handler,
-				      ext_int_info_t *p)
-{
-        int index;
+	struct ext_int_info *p;
+	int index;
 
-        if (p == NULL)
-                return -EINVAL;
-        p->code = code;
-        p->handler = handler;
+	p = kmalloc(sizeof(*p), GFP_ATOMIC);
+	if (!p)
+		return -ENOMEM;
+	p->code = code;
+	p->handler = handler;
 	index = ext_hash(code);
-        p->next = ext_int_hash[index];
-        ext_int_hash[index] = p;
-        return 0;
+	p->next = ext_int_hash[index];
+	ext_int_hash[index] = p;
+	return 0;
 }
+EXPORT_SYMBOL(register_external_interrupt);
 
 int unregister_external_interrupt(__u16 code, ext_int_handler_t handler)
 {
-        ext_int_info_t *p, *q;
-        int index;
-
-	index = ext_hash(code);
-        q = NULL;
-        p = ext_int_hash[index];
-        while (p != NULL) {
-                if (p->code == code && p->handler == handler)
-                        break;
-                q = p;
-                p = p->next;
-        }
-        if (p == NULL)
-                return -ENOENT;
-        if (q != NULL)
-                q->next = p->next;
-        else
-                ext_int_hash[index] = p->next;
-	kfree(p);
-        return 0;
-}
-
-int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler,
-					ext_int_info_t *p)
-{
-	ext_int_info_t *q;
+	struct ext_int_info *p, *q;
 	int index;
 
-	if (p == NULL || p->code != code || p->handler != handler)
-		return -EINVAL;
 	index = ext_hash(code);
-	q = ext_int_hash[index];
-	if (p != q) {
-		while (q != NULL) {
-			if (q->next == p)
-				break;
-			q = q->next;
-		}
-		if (q == NULL)
-			return -ENOENT;
+	q = NULL;
+	p = ext_int_hash[index];
+	while (p) {
+		if (p->code == code && p->handler == handler)
+			break;
+		q = p;
+		p = p->next;
+	}
+	if (!p)
+		return -ENOENT;
+	if (q)
 		q->next = p->next;
-	} else
+	else
 		ext_int_hash[index] = p->next;
+	kfree(p);
 	return 0;
 }
+EXPORT_SYMBOL(unregister_external_interrupt);
 
 void __irq_entry do_extint(struct pt_regs *regs, unsigned int ext_int_code,
 			   unsigned int param32, unsigned long param64)
 {
 	struct pt_regs *old_regs;
 	unsigned short code;
-        ext_int_info_t *p;
-        int index;
+	struct ext_int_info *p;
+	int index;
 
 	code = (unsigned short) ext_int_code;
 	old_regs = set_irq_regs(regs);
@@ -132,7 +98,7 @@ void __irq_entry do_extint(struct pt_regs *regs, unsigned int ext_int_code,
 	kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++;
 	if (code != 0x1004)
 		__get_cpu_var(s390_idle).nohz_delay = 1;
-        index = ext_hash(code);
+	index = ext_hash(code);
 	for (p = ext_int_hash[index]; p; p = p->next) {
 		if (likely(p->code == code))
 			p->handler(ext_int_code, param32, param64);
@@ -140,6 +106,3 @@ void __irq_entry do_extint(struct pt_regs *regs, unsigned int ext_int_code,
 	irq_exit();
 	set_irq_regs(old_regs);
 }
-
-EXPORT_SYMBOL(register_external_interrupt);
-EXPORT_SYMBOL(unregister_external_interrupt);
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index ee7ac8b1178..abbb3c3c7aa 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -505,7 +505,7 @@ void do_signal(struct pt_regs *regs)
 			 * Let tracing know that we've done the handler setup.
 			 */
 			tracehook_signal_handler(signr, &info, &ka, regs,
-					current->thread.per_info.single_step);
+					test_thread_flag(TIF_SINGLE_STEP));
 		}
 		return;
 	}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 94cf510b8fe..63a97db83f9 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -23,6 +23,7 @@
 #define KMSG_COMPONENT "cpu"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/workqueue.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/mm.h>
@@ -161,6 +162,7 @@ static void do_ext_call_interrupt(unsigned int ext_int_code,
 {
 	unsigned long bits;
 
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_IPI]++;
 	/*
 	 * handle bit signal external calls
 	 *
@@ -469,25 +471,25 @@ int __cpuinit start_secondary(void *cpuvoid)
 	ipi_call_unlock();
 	/* Switch on interrupts */
 	local_irq_enable();
-	/* Print info about this processor */
-	print_cpu_info();
 	/* cpu_idle will call schedule for us */
 	cpu_idle();
 	return 0;
 }
 
-static void __init smp_create_idle(unsigned int cpu)
+struct create_idle {
+	struct work_struct work;
+	struct task_struct *idle;
+	struct completion done;
+	int cpu;
+};
+
+static void __cpuinit smp_fork_idle(struct work_struct *work)
 {
-	struct task_struct *p;
+	struct create_idle *c_idle;
 
-	/*
-	 *  don't care about the psw and regs settings since we'll never
-	 *  reschedule the forked task.
-	 */
-	p = fork_idle(cpu);
-	if (IS_ERR(p))
-		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
-	current_set[cpu] = p;
+	c_idle = container_of(work, struct create_idle, work);
+	c_idle->idle = fork_idle(c_idle->cpu);
+	complete(&c_idle->done);
 }
 
 static int __cpuinit smp_alloc_lowcore(int cpu)
@@ -551,6 +553,7 @@ static void smp_free_lowcore(int cpu)
 int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct _lowcore *cpu_lowcore;
+	struct create_idle c_idle;
 	struct task_struct *idle;
 	struct stack_frame *sf;
 	u32 lowcore;
@@ -558,6 +561,19 @@ int __cpuinit __cpu_up(unsigned int cpu)
 
 	if (smp_cpu_state[cpu] != CPU_STATE_CONFIGURED)
 		return -EIO;
+	idle = current_set[cpu];
+	if (!idle) {
+		c_idle.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done);
+		INIT_WORK_ONSTACK(&c_idle.work, smp_fork_idle);
+		c_idle.cpu = cpu;
+		schedule_work(&c_idle.work);
+		wait_for_completion(&c_idle.done);
+		if (IS_ERR(c_idle.idle))
+			return PTR_ERR(c_idle.idle);
+		idle = c_idle.idle;
+		current_set[cpu] = c_idle.idle;
+	}
+	init_idle(idle, cpu);
 	if (smp_alloc_lowcore(cpu))
 		return -ENOMEM;
 	do {
@@ -572,7 +588,6 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	while (sigp_p(lowcore, cpu, sigp_set_prefix) == sigp_busy)
 		udelay(10);
 
-	idle = current_set[cpu];
 	cpu_lowcore = lowcore_ptr[cpu];
 	cpu_lowcore->kernel_stack = (unsigned long)
 		task_stack_page(idle) + THREAD_SIZE;
@@ -664,7 +679,6 @@ void __cpu_die(unsigned int cpu)
 		udelay(10);
 	smp_free_lowcore(cpu);
 	atomic_dec(&init_mm.context.attach_count);
-	pr_info("Processor %d stopped\n", cpu);
 }
 
 void cpu_die(void)
@@ -684,14 +698,12 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 #endif
 	unsigned long async_stack, panic_stack;
 	struct _lowcore *lowcore;
-	unsigned int cpu;
 
 	smp_detect_cpus();
 
 	/* request the 0x1201 emergency signal external interrupt */
 	if (register_external_interrupt(0x1201, do_ext_call_interrupt) != 0)
 		panic("Couldn't request external interrupt 0x1201");
-	print_cpu_info();
 
 	/* Reallocate current lowcore, but keep its contents. */
 	lowcore = (void *) __get_free_pages(GFP_KERNEL | GFP_DMA, LC_ORDER);
@@ -719,9 +731,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	if (vdso_alloc_per_cpu(smp_processor_id(), &S390_lowcore))
 		BUG();
 #endif
-	for_each_possible_cpu(cpu)
-		if (cpu != smp_processor_id())
-			smp_create_idle(cpu);
 }
 
 void __init smp_prepare_boot_cpu(void)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index f754a6dc4f9..9e7b039458d 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -15,6 +15,7 @@
 #define KMSG_COMPONENT "time"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/kernel_stat.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -37,6 +38,7 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/gfp.h>
+#include <linux/kprobes.h>
 #include <asm/uaccess.h>
 #include <asm/delay.h>
 #include <asm/s390_ext.h>
@@ -60,7 +62,7 @@ static DEFINE_PER_CPU(struct clock_event_device, comparators);
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
-unsigned long long notrace sched_clock(void)
+unsigned long long notrace __kprobes sched_clock(void)
 {
 	return (get_clock_monotonic() * 125) >> 9;
 }
@@ -159,6 +161,7 @@ static void clock_comparator_interrupt(unsigned int ext_int_code,
 				       unsigned int param32,
 				       unsigned long param64)
 {
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_CLK]++;
 	if (S390_lowcore.clock_comparator == -1ULL)
 		set_clock_comparator(S390_lowcore.clock_comparator);
 }
@@ -169,6 +172,7 @@ static void stp_timing_alert(struct stp_irq_parm *);
 static void timing_alert_interrupt(unsigned int ext_int_code,
 				   unsigned int param32, unsigned long param64)
 {
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_TLA]++;
 	if (param32 & 0x00c40000)
 		etr_timing_alert((struct etr_irq_parm *) &param32);
 	if (param32 & 0x00038000)
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 70640822621..5eb78dd584c 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -365,12 +365,10 @@ static inline void __user *get_psw_address(struct pt_regs *regs,
 		((regs->psw.addr - (pgm_int_code >> 16)) & PSW_ADDR_INSN);
 }
 
-void __kprobes do_single_step(struct pt_regs *regs)
+void __kprobes do_per_trap(struct pt_regs *regs)
 {
-	if (notify_die(DIE_SSTEP, "sstep", regs, 0, 0,
-					SIGTRAP) == NOTIFY_STOP){
+	if (notify_die(DIE_SSTEP, "sstep", regs, 0, 0, SIGTRAP) == NOTIFY_STOP)
 		return;
-	}
 	if (tracehook_consider_fatal_signal(current, SIGTRAP))
 		force_sig(SIGTRAP, current);
 }
@@ -451,8 +449,8 @@ static inline void do_fp_trap(struct pt_regs *regs, void __user *location,
 		"floating point exception", regs, &si);
 }
 
-static void illegal_op(struct pt_regs *regs, long pgm_int_code,
-		       unsigned long trans_exc_code)
+static void __kprobes illegal_op(struct pt_regs *regs, long pgm_int_code,
+				 unsigned long trans_exc_code)
 {
 	siginfo_t info;
         __u8 opcode[6];
@@ -688,7 +686,7 @@ static void space_switch_exception(struct pt_regs *regs, long pgm_int_code,
 	do_trap(pgm_int_code, SIGILL, "space switch event", regs, &info);
 }
 
-asmlinkage void kernel_stack_overflow(struct pt_regs * regs)
+asmlinkage void __kprobes kernel_stack_overflow(struct pt_regs * regs)
 {
 	bust_spinlocks(1);
 	printk("Kernel stack overflow.\n");
@@ -733,5 +731,6 @@ void __init trap_init(void)
         pgm_check_table[0x15] = &operand_exception;
         pgm_check_table[0x1C] = &space_switch_exception;
         pgm_check_table[0x1D] = &hfp_sqrt_exception;
-	pfault_irq_init();
+	/* Enable machine checks early. */
+	local_mcck_enable();
 }
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 56c8687b29b..1ccdf4d8aa8 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -19,6 +19,8 @@
 #include <linux/kernel_stat.h>
 #include <linux/rcupdate.h>
 #include <linux/posix-timers.h>
+#include <linux/cpu.h>
+#include <linux/kprobes.h>
 
 #include <asm/s390_ext.h>
 #include <asm/timer.h>
@@ -121,7 +123,7 @@ void account_system_vtime(struct task_struct *tsk)
 }
 EXPORT_SYMBOL_GPL(account_system_vtime);
 
-void vtime_start_cpu(__u64 int_clock, __u64 enter_timer)
+void __kprobes vtime_start_cpu(__u64 int_clock, __u64 enter_timer)
 {
 	struct s390_idle_data *idle = &__get_cpu_var(s390_idle);
 	struct vtimer_queue *vq = &__get_cpu_var(virt_cpu_timer);
@@ -161,7 +163,7 @@ void vtime_start_cpu(__u64 int_clock, __u64 enter_timer)
 	idle->sequence++;
 }
 
-void vtime_stop_cpu(void)
+void __kprobes vtime_stop_cpu(void)
 {
 	struct s390_idle_data *idle = &__get_cpu_var(s390_idle);
 	struct vtimer_queue *vq = &__get_cpu_var(virt_cpu_timer);
@@ -322,6 +324,7 @@ static void do_cpu_timer_interrupt(unsigned int ext_int_code,
 	struct list_head cb_list;	/* the callback queue */
 	__u64 elapsed, next;
 
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_TMR]++;
 	INIT_LIST_HEAD(&cb_list);
 	vq = &__get_cpu_var(virt_cpu_timer);
 
@@ -566,6 +569,23 @@ void init_cpu_vtimer(void)
 	__ctl_set_bit(0,10);
 }
 
+static int __cpuinit s390_nohz_notify(struct notifier_block *self,
+				      unsigned long action, void *hcpu)
+{
+	struct s390_idle_data *idle;
+	long cpu = (long) hcpu;
+
+	idle = &per_cpu(s390_idle, cpu);
+	switch (action) {
+	case CPU_DYING:
+	case CPU_DYING_FROZEN:
+		idle->nohz_delay = 0;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
 void __init vtime_init(void)
 {
 	/* request the cpu timer external interrupt */
@@ -574,5 +594,6 @@ void __init vtime_init(void)
 
 	/* Enable cpu timer interrupts on the boot cpu. */
 	init_cpu_vtimer();
+	cpu_notifier(s390_nohz_notify, 0);
 }
 
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index a7251580891..f66a1bdbb61 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -4,8 +4,8 @@
 source "virt/kvm/Kconfig"
 
 menuconfig VIRTUALIZATION
-	bool "Virtualization"
-	default y
+	def_bool y
+	prompt "Virtualization"
 	---help---
 	  Say Y here to get to see options for using your Linux host to run other
 	  operating systems inside virtual machines (guests).
@@ -16,7 +16,8 @@ menuconfig VIRTUALIZATION
 if VIRTUALIZATION
 
 config KVM
-	tristate "Kernel-based Virtual Machine (KVM) support"
+	def_tristate y
+	prompt "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM && EXPERIMENTAL
 	select PREEMPT_NOTIFIERS
 	select ANON_INODES
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 752b362bf65..0f53110e1d0 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -29,21 +29,24 @@ static void __udelay_disabled(unsigned long long usecs)
 {
 	unsigned long mask, cr0, cr0_saved;
 	u64 clock_saved;
+	u64 end;
 
+	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+	end = get_clock() + (usecs << 12);
 	clock_saved = local_tick_disable();
-	set_clock_comparator(get_clock() + (usecs << 12));
 	__ctl_store(cr0_saved, 0, 0);
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
-	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
 	lockdep_off();
-	trace_hardirqs_on();
-	__load_psw_mask(mask);
-	local_irq_disable();
+	do {
+		set_clock_comparator(end);
+		trace_hardirqs_on();
+		__load_psw_mask(mask);
+		local_irq_disable();
+	} while (get_clock() < end);
 	lockdep_on();
 	__ctl_load(cr0_saved, 0, 0);
 	local_tick_enable(clock_saved);
-	set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
 static void __udelay_enabled(unsigned long long usecs)
@@ -66,7 +69,6 @@ static void __udelay_enabled(unsigned long long usecs)
 		if (clock_saved)
 			local_tick_enable(clock_saved);
 	} while (get_clock() < end);
-	set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
 /*
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index fe5701e9efb..2c57806c085 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -10,6 +10,7 @@
  *    Copyright (C) 1995  Linus Torvalds
  */
 
+#include <linux/kernel_stat.h>
 #include <linux/perf_event.h>
 #include <linux/signal.h>
 #include <linux/sched.h>
@@ -234,13 +235,13 @@ static noinline int signal_return(struct pt_regs *regs, long int_code,
 	rc = __get_user(instruction, (u16 __user *) regs->psw.addr);
 
 	if (!rc && instruction == 0x0a77) {
-		clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
+		clear_tsk_thread_flag(current, TIF_PER_TRAP);
 		if (is_compat_task())
 			sys32_sigreturn();
 		else
 			sys_sigreturn();
 	} else if (!rc && instruction == 0x0aad) {
-		clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
+		clear_tsk_thread_flag(current, TIF_PER_TRAP);
 		if (is_compat_task())
 			sys32_rt_sigreturn();
 		else
@@ -378,7 +379,7 @@ static inline int do_exception(struct pt_regs *regs, int access,
 	 * The instruction that caused the program check will
 	 * be repeated. Don't signal single step via SIGTRAP.
 	 */
-	clear_tsk_thread_flag(tsk, TIF_SINGLE_STEP);
+	clear_tsk_thread_flag(tsk, TIF_PER_TRAP);
 	fault = 0;
 out_up:
 	up_read(&mm->mmap_sem);
@@ -480,8 +481,7 @@ int __handle_fault(unsigned long uaddr, unsigned long pgm_int_code, int write)
 /*
  * 'pfault' pseudo page faults routines.
  */
-static ext_int_info_t ext_int_pfault;
-static int pfault_disable = 0;
+static int pfault_disable;
 
 static int __init nopfault(char *str)
 {
@@ -543,6 +543,7 @@ static void pfault_interrupt(unsigned int ext_int_code,
 	struct task_struct *tsk;
 	__u16 subcode;
 
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++;
 	/*
 	 * Get the external interruption subcode & pfault
 	 * initial/completion signal bit. VM stores this 
@@ -592,24 +593,28 @@ static void pfault_interrupt(unsigned int ext_int_code,
 	}
 }
 
-void __init pfault_irq_init(void)
+static int __init pfault_irq_init(void)
 {
-	if (!MACHINE_IS_VM)
-		return;
+	int rc;
 
+	if (!MACHINE_IS_VM)
+		return 0;
 	/*
 	 * Try to get pfault pseudo page faults going.
 	 */
-	if (register_early_external_interrupt(0x2603, pfault_interrupt,
-					      &ext_int_pfault) != 0)
-		panic("Couldn't request external interrupt 0x2603");
-
+	rc = register_external_interrupt(0x2603, pfault_interrupt);
+	if (rc) {
+		pfault_disable = 1;
+		return rc;
+	}
 	if (pfault_init() == 0)
-		return;
+		return 0;
 
 	/* Tough luck, no pfault. */
 	pfault_disable = 1;
-	unregister_early_external_interrupt(0x2603, pfault_interrupt,
-					    &ext_int_pfault);
+	unregister_external_interrupt(0x2603, pfault_interrupt);
+	return 0;
 }
+early_initcall(pfault_irq_init);
+
 #endif
diff --git a/arch/s390/mm/gup.c b/arch/s390/mm/gup.c
index 38e641cdd97..45b405ca256 100644
--- a/arch/s390/mm/gup.c
+++ b/arch/s390/mm/gup.c
@@ -20,18 +20,17 @@
 static inline int gup_pte_range(pmd_t *pmdp, pmd_t pmd, unsigned long addr,
 		unsigned long end, int write, struct page **pages, int *nr)
 {
-	unsigned long mask, result;
+	unsigned long mask;
 	pte_t *ptep, pte;
 	struct page *page;
 
-	result = write ? 0 : _PAGE_RO;
-	mask = result | _PAGE_INVALID | _PAGE_SPECIAL;
+	mask = (write ? _PAGE_RO : 0) | _PAGE_INVALID | _PAGE_SPECIAL;
 
 	ptep = ((pte_t *) pmd_deref(pmd)) + pte_index(addr);
 	do {
 		pte = *ptep;
 		barrier();
-		if ((pte_val(pte) & mask) != result)
+		if ((pte_val(pte) & mask) != 0)
 			return 0;
 		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
 		page = pte_page(pte);
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 7f217b3a50a..fff252209f6 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -1,7 +1,7 @@
 config SUPERH
 	def_bool y
 	select EMBEDDED
-	select HAVE_CLK
+	select CLKDEV_LOOKUP
 	select HAVE_IDE if HAS_IOPORT
 	select HAVE_MEMBLOCK
 	select HAVE_OPROFILE
@@ -22,7 +22,8 @@ config SUPERH
 	select HAVE_SPARSE_IRQ
 	select RTC_LIB
 	select GENERIC_ATOMIC64
-	select GENERIC_HARDIRQS_NO_DEPRECATED
+	# Support the deprecated APIs until MFD and GPIOLIB catch up.
+	select GENERIC_HARDIRQS_NO_DEPRECATED if !MFD_SUPPORT && !GPIOLIB
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -161,7 +162,8 @@ config ARCH_HAS_CPU_IDLE_WAIT
 	def_bool y
 
 config NO_IOPORT
-	bool
+	def_bool !PCI
+	depends on !SH_CAYMAN && !SH_SH4202_MICRODEV
 
 config IO_TRAPPED
 	bool
@@ -274,6 +276,7 @@ config CPU_SUBTYPE_SH7203
 	select CPU_HAS_FPU
 	select SYS_SUPPORTS_CMT
 	select SYS_SUPPORTS_MTU2
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config CPU_SUBTYPE_SH7206
 	bool "Support SH7206 processor"
@@ -345,6 +348,8 @@ config CPU_SUBTYPE_SH7720
 	select CPU_SH3
 	select CPU_HAS_DSP
 	select SYS_SUPPORTS_CMT
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select USB_ARCH_HAS_OHCI
 	help
 	  Select SH7720 if you have a SH3-DSP SH7720 CPU.
 
@@ -353,6 +358,7 @@ config CPU_SUBTYPE_SH7721
 	select CPU_SH3
 	select CPU_HAS_DSP
 	select SYS_SUPPORTS_CMT
+	select USB_ARCH_HAS_OHCI
 	help
 	  Select SH7721 if you have a SH3-DSP SH7721 CPU.
 
@@ -407,6 +413,7 @@ config CPU_SUBTYPE_SH7723
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_CMT
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Select SH7723 if you have an SH-MobileR2 CPU.
 
@@ -417,6 +424,7 @@ config CPU_SUBTYPE_SH7724
 	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_CMT
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Select SH7724 if you have an SH-MobileR2R CPU.
 
@@ -424,12 +432,14 @@ config CPU_SUBTYPE_SH7757
 	bool "Support SH7757 processor"
 	select CPU_SH4A
 	select CPU_SHX2
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Select SH7757 if you have a SH4A SH7757 CPU.
 
 config CPU_SUBTYPE_SH7763
 	bool "Support SH7763 processor"
 	select CPU_SH4A
+	select USB_ARCH_HAS_OHCI
 	help
 	  Select SH7763 if you have a SH4A SH7763(R5S77631) CPU.
 
@@ -447,6 +457,7 @@ config CPU_SUBTYPE_SH7785
 	select CPU_SHX2
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config CPU_SUBTYPE_SH7786
 	bool "Support SH7786 processor"
@@ -454,6 +465,9 @@ config CPU_SUBTYPE_SH7786
 	select CPU_SHX3
 	select CPU_HAS_PTEAEX
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select USB_ARCH_HAS_OHCI
+	select USB_ARCH_HAS_EHCI
 
 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"
@@ -478,6 +492,7 @@ config CPU_SUBTYPE_SH7722
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_CMT
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config CPU_SUBTYPE_SH7366
 	bool "Support SH7366 processor"
@@ -567,15 +582,6 @@ config SH_CLK_CPG_LEGACY
 	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
 		      !CPU_SHX3 && !CPU_SUBTYPE_SH7757
 
-config SH_CLK_MD
-	int "CPU Mode Pin Setting"
-	depends on CPU_SH2
-	default 6 if CPU_SUBTYPE_SH7206
-	default 5 if CPU_SUBTYPE_SH7619
-	default 0
-	help
-	  MD2 - MD0 pin setting.
-
 source "kernel/time/Kconfig"
 
 endmenu
diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c
index 32f875e8493..f968f17891a 100644
--- a/arch/sh/boards/board-secureedge5410.c
+++ b/arch/sh/boards/board-secureedge5410.c
@@ -29,8 +29,6 @@ unsigned short secureedge5410_ioport;
  */
 static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 {
-	ctrl_delay();	/* dummy read */
-
 	printk("SnapGear: erase switch interrupt!\n");
 
 	return IRQ_HANDLED;
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 2eaeb9e5958..f48c492a68d 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -720,32 +720,6 @@ static struct platform_device camera_devices[] = {
 };
 
 /* FSI */
-/*
- * FSI-B use external clock which came from da7210.
- * So, we should change parent of fsi
- */
-#define FCLKBCR		0xa415000c
-static void fsimck_init(struct clk *clk)
-{
-	u32 status = __raw_readl(clk->enable_reg);
-
-	/* use external clock */
-	status &= ~0x000000ff;
-	status |= 0x00000080;
-
-	__raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
-	.init = fsimck_init,
-};
-
-static struct clk fsimckb_clk = {
-	.ops		= &fsimck_clk_ops,
-	.enable_reg	= (void __iomem *)FCLKBCR,
-	.rate		= 0, /* unknown */
-};
-
 static struct sh_fsi_platform_info fsi_info = {
 	.portb_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
@@ -1264,10 +1238,10 @@ static int __init arch_setup(void)
 	/* change parent of FSI B */
 	clk = clk_get(NULL, "fsib_clk");
 	if (!IS_ERR(clk)) {
-		clk_register(&fsimckb_clk);
-		clk_set_parent(clk, &fsimckb_clk);
-		clk_set_rate(clk, 11000);
-		clk_set_rate(&fsimckb_clk, 11000);
+		/* 48kHz dummy clock was used to make sure 1/1 divide */
+		clk_set_rate(&sh7724_fsimckb_clk, 48000);
+		clk_set_parent(clk, &sh7724_fsimckb_clk);
+		clk_set_rate(clk, 48000);
 		clk_put(clk);
 	}
 
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index a5ecfbacaf3..87618c91d17 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -24,10 +24,10 @@
 #include <linux/interrupt.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/usb/m66592.h>
+#include <linux/clkdev.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <mach/highlander.h>
-#include <asm/clkdev.h>
 #include <asm/clock.h>
 #include <asm/heartbeat.h>
 #include <asm/io.h>
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index 4fa08ba1025..a8089f79d05 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -1,7 +1,7 @@
 /*
  * Renesas Technology Europe RSK+ 7203 Support.
  *
- * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,7 +12,9 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
+#include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
 #include <linux/leds.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
@@ -84,9 +86,42 @@ static struct platform_device led_device = {
 	},
 };
 
+static struct gpio_keys_button rsk7203_gpio_keys_table[] = {
+	{
+		.code		= BTN_0,
+		.gpio		= GPIO_PB0,
+		.active_low	= 1,
+		.desc		= "SW1",
+	}, {
+		.code		= BTN_1,
+		.gpio		= GPIO_PB1,
+		.active_low	= 1,
+		.desc		= "SW2",
+	}, {
+		.code		= BTN_2,
+		.gpio		= GPIO_PB2,
+		.active_low	= 1,
+		.desc		= "SW3",
+	},
+};
+
+static struct gpio_keys_platform_data rsk7203_gpio_keys_info = {
+	.buttons	= rsk7203_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(rsk7203_gpio_keys_table),
+	.poll_interval	= 50, /* default to 50ms */
+};
+
+static struct platform_device keys_device = {
+	.name		= "gpio-keys-polled",
+	.dev		= {
+		.platform_data	= &rsk7203_gpio_keys_info,
+	},
+};
+
 static struct platform_device *rsk7203_devices[] __initdata = {
 	&smsc911x_device,
 	&led_device,
+	&keys_device,
 };
 
 static int __init rsk7203_devices_setup(void)
diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile
index 23ff7d4ac49..8ae56e9560a 100644
--- a/arch/sh/boards/mach-sdk7786/Makefile
+++ b/arch/sh/boards/mach-sdk7786/Makefile
@@ -1,4 +1,4 @@
-obj-y	:= fpga.o irq.o setup.o
+obj-y	:= fpga.o irq.o nmi.o setup.o
 
 obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_HAVE_SRAM_POOL)	+= sram.o
diff --git a/arch/sh/boards/mach-sdk7786/nmi.c b/arch/sh/boards/mach-sdk7786/nmi.c
new file mode 100644
index 00000000000..edcfa1f568b
--- /dev/null
+++ b/arch/sh/boards/mach-sdk7786/nmi.c
@@ -0,0 +1,83 @@
+/*
+ * SDK7786 FPGA NMI Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <mach/fpga.h>
+
+enum {
+	NMI_MODE_MANUAL,
+	NMI_MODE_AUX,
+	NMI_MODE_MASKED,
+	NMI_MODE_ANY,
+	NMI_MODE_UNKNOWN,
+};
+
+/*
+ * Default to the manual NMI switch.
+ */
+static unsigned int __initdata nmi_mode = NMI_MODE_ANY;
+
+static int __init nmi_mode_setup(char *str)
+{
+	if (!str)
+		return 0;
+
+	if (strcmp(str, "manual") == 0)
+		nmi_mode = NMI_MODE_MANUAL;
+	else if (strcmp(str, "aux") == 0)
+		nmi_mode = NMI_MODE_AUX;
+	else if (strcmp(str, "masked") == 0)
+		nmi_mode = NMI_MODE_MASKED;
+	else if (strcmp(str, "any") == 0)
+		nmi_mode = NMI_MODE_ANY;
+	else {
+		nmi_mode = NMI_MODE_UNKNOWN;
+		pr_warning("Unknown NMI mode %s\n", str);
+	}
+
+	printk("Set NMI mode to %d\n", nmi_mode);
+	return 0;
+}
+early_param("nmi_mode", nmi_mode_setup);
+
+void __init sdk7786_nmi_init(void)
+{
+	unsigned int source, mask, tmp;
+
+	switch (nmi_mode) {
+	case NMI_MODE_MANUAL:
+		source = NMISR_MAN_NMI;
+		mask = NMIMR_MAN_NMIM;
+		break;
+	case NMI_MODE_AUX:
+		source = NMISR_AUX_NMI;
+		mask = NMIMR_AUX_NMIM;
+		break;
+	case NMI_MODE_ANY:
+		source = NMISR_MAN_NMI | NMISR_AUX_NMI;
+		mask = NMIMR_MAN_NMIM | NMIMR_AUX_NMIM;
+		break;
+	case NMI_MODE_MASKED:
+	case NMI_MODE_UNKNOWN:
+	default:
+		source = mask = 0;
+		break;
+	}
+
+	/* Set the NMI source */
+	tmp = fpga_read_reg(NMISR);
+	tmp &= ~NMISR_MASK;
+	tmp |= source;
+	fpga_write_reg(tmp, NMISR);
+
+	/* And the IRQ masking */
+	fpga_write_reg(NMIMR_MASK ^ mask, NMIMR);
+}
diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c
index 7e0c4e3878e..75e4ddbbec3 100644
--- a/arch/sh/boards/mach-sdk7786/setup.c
+++ b/arch/sh/boards/mach-sdk7786/setup.c
@@ -237,6 +237,7 @@ static void __init sdk7786_setup(char **cmdline_p)
 	pr_info("Renesas Technology Europe SDK7786 support:\n");
 
 	sdk7786_fpga_init();
+	sdk7786_nmi_init();
 
 	pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf);
 
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index d961949600f..9070d7e6070 100644
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -140,7 +140,7 @@ void __init init_se7206_IRQ(void)
 	make_se7206_irq(IRQ1_IRQ); /* ATA */
 	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
 
-	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
+	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
 
 	/* FPGA System register setup*/
 	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
index 7f4871c71a0..33039e0dc56 100644
--- a/arch/sh/boards/mach-se/7206/setup.c
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -79,6 +79,11 @@ static int __init se7206_devices_setup(void)
 }
 __initcall(se7206_devices_setup);
 
+static int se7206_mode_pins(void)
+{
+	return MODE_PIN1 | MODE_PIN2;
+}
+
 /*
  * The Machine Vector
  */
@@ -87,4 +92,5 @@ static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 256,
 	.mv_init_irq		= init_se7206_IRQ,
+	.mv_mode_pins		= se7206_mode_pins,
 };
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index c31d228fdfc..527a0cd956b 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -283,31 +283,6 @@ static struct platform_device ceu1_device = {
 };
 
 /* FSI */
-/*
- * FSI-A use external clock which came from ak464x.
- * So, we should change parent of fsi
- */
-#define FCLKACR		0xa4150008
-static void fsimck_init(struct clk *clk)
-{
-	u32 status = __raw_readl(clk->enable_reg);
-
-	/* use external clock */
-	status &= ~0x000000ff;
-	status |= 0x00000080;
-	__raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
-	.init = fsimck_init,
-};
-
-static struct clk fsimcka_clk = {
-	.ops		= &fsimck_clk_ops,
-	.enable_reg	= (void __iomem *)FCLKACR,
-	.rate		= 0, /* unknown */
-};
-
 /* change J20, J21, J22 pin to 1-2 connection to use slave mode */
 static struct sh_fsi_platform_info fsi_info = {
 	.porta_flags = SH_FSI_BRS_INV |
@@ -852,37 +827,29 @@ static int __init devices_setup(void)
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
 	/* enable FSI */
-	gpio_request(GPIO_FN_FSIMCKB,    NULL);
 	gpio_request(GPIO_FN_FSIMCKA,    NULL);
+	gpio_request(GPIO_FN_FSIIASD,    NULL);
 	gpio_request(GPIO_FN_FSIOASD,    NULL);
 	gpio_request(GPIO_FN_FSIIABCK,   NULL);
 	gpio_request(GPIO_FN_FSIIALRCK,  NULL);
 	gpio_request(GPIO_FN_FSIOABCK,   NULL);
 	gpio_request(GPIO_FN_FSIOALRCK,  NULL);
 	gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
-	gpio_request(GPIO_FN_FSIIBSD,    NULL);
-	gpio_request(GPIO_FN_FSIOBSD,    NULL);
-	gpio_request(GPIO_FN_FSIIBBCK,   NULL);
-	gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
-	gpio_request(GPIO_FN_FSIOBBCK,   NULL);
-	gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
-	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
-	gpio_request(GPIO_FN_FSIIASD,    NULL);
 
 	/* set SPU2 clock to 83.4 MHz */
 	clk = clk_get(NULL, "spu_clk");
-	if (clk) {
+	if (!IS_ERR(clk)) {
 		clk_set_rate(clk, clk_round_rate(clk, 83333333));
 		clk_put(clk);
 	}
 
 	/* change parent of FSI A */
 	clk = clk_get(NULL, "fsia_clk");
-	if (clk) {
-		clk_register(&fsimcka_clk);
-		clk_set_parent(clk, &fsimcka_clk);
-		clk_set_rate(clk, 11000);
-		clk_set_rate(&fsimcka_clk, 11000);
+	if (!IS_ERR(clk)) {
+		/* 48kHz dummy clock was used to make sure 1/1 divide */
+		clk_set_rate(&sh7724_fsimcka_clk, 48000);
+		clk_set_parent(clk, &sh7724_fsimcka_clk);
+		clk_set_rate(clk, 48000);
 		clk_put(clk);
 	}
 
diff --git a/arch/sh/boards/mach-se/board-se7619.c b/arch/sh/boards/mach-se/board-se7619.c
index 1d0ef7faa10..82b6d4a5dc0 100644
--- a/arch/sh/boards/mach-se/board-se7619.c
+++ b/arch/sh/boards/mach-se/board-se7619.c
@@ -11,6 +11,11 @@
 #include <asm/io.h>
 #include <asm/machvec.h>
 
+static int se7619_mode_pins(void)
+{
+	return MODE_PIN2 | MODE_PIN0;
+}
+
 /*
  * The Machine Vector
  */
@@ -18,4 +23,5 @@
 static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 108,
+	.mv_mode_pins		= se7619_mode_pins,
 };
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 9ad904a110d..cc61eda4492 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -54,6 +54,8 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_MIGOR=y
 # CONFIG_SERIO is not set
 CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_SH_SCI=y
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 60ee09a4e12..a09c77dd09d 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -382,14 +382,13 @@ static void __iomem *ioport_map_pci(struct pci_dev *dev,
 	struct pci_channel *chan = dev->sysdata;
 
 	if (unlikely(!chan->io_map_base)) {
-		chan->io_map_base = generic_io_base;
+		chan->io_map_base = sh_io_port_base;
 
 		if (pci_domains_supported)
 			panic("To avoid data corruption io_map_base MUST be "
 			      "set with multiple PCI domains.");
 	}
 
-
 	return (void __iomem *)(chan->io_map_base + port);
 }
 
diff --git a/arch/sh/drivers/push-switch.c b/arch/sh/drivers/push-switch.c
index 7b42c247316..afc24556572 100644
--- a/arch/sh/drivers/push-switch.c
+++ b/arch/sh/drivers/push-switch.c
@@ -107,7 +107,7 @@ static int switch_drv_remove(struct platform_device *pdev)
 		device_remove_file(&pdev->dev, &dev_attr_switch);
 
 	platform_set_drvdata(pdev, NULL);
-	flush_scheduled_work();
+	flush_work_sync(&psw->work);
 	del_timer_sync(&psw->debounce);
 	free_irq(irq, pdev);
 
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
index 1f4e562c5e8..82e1eabeac9 100644
--- a/arch/sh/include/asm/cacheflush.h
+++ b/arch/sh/include/asm/cacheflush.h
@@ -96,7 +96,7 @@ void kmap_coherent_init(void);
 void *kmap_coherent(struct page *page, unsigned long addr);
 void kunmap_coherent(void *kvaddr);
 
-#define PG_dcache_dirty	PG_arch_1
+#define PG_dcache_clean	PG_arch_1
 
 void cpu_cache_init(void);
 
diff --git a/arch/sh/include/asm/clkdev.h b/arch/sh/include/asm/clkdev.h
index 5645f358128..6ba91868201 100644
--- a/arch/sh/include/asm/clkdev.h
+++ b/arch/sh/include/asm/clkdev.h
@@ -1,9 +1,5 @@
 /*
- *  arch/sh/include/asm/clkdev.h
- *
- * Cloned from arch/arm/include/asm/clkdev.h:
- *
- *  Copyright (C) 2008 Russell King.
+ *  Copyright (C) 2010 Paul Mundt <lethal@linux-sh.org>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -11,25 +7,25 @@
  *
  * Helper for the clk API to assist looking up a struct clk.
  */
-#ifndef __ASM_CLKDEV_H
-#define __ASM_CLKDEV_H
 
-struct clk;
+#ifndef __CLKDEV__H_
+#define __CLKDEV__H_
 
-struct clk_lookup {
-	struct list_head	node;
-	const char		*dev_id;
-	const char		*con_id;
-	struct clk		*clk;
-};
+#include <linux/bootmem.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
 
-struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
-	const char *dev_fmt, ...);
+#include <asm/clock.h>
 
-void clkdev_add(struct clk_lookup *cl);
-void clkdev_drop(struct clk_lookup *cl);
+static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size)
+{
+	if (!slab_is_available())
+		return alloc_bootmem_low_pages(size);
+	else
+		return kzalloc(size, GFP_KERNEL);
+}
 
-void clkdev_add_table(struct clk_lookup *, size_t);
-int clk_add_alias(const char *, const char *, char *, struct device *);
+#define __clk_put(clk)
+#define __clk_get(clk) ({ 1; })
 
-#endif
+#endif /* __CLKDEV_H__ */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index b237d525d59..89ab2c57a4c 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -1,5 +1,6 @@
 #ifndef __ASM_SH_IO_H
 #define __ASM_SH_IO_H
+
 /*
  * Convention:
  *    read{b,w,l,q}/write{b,w,l,q} are for PCI,
@@ -15,12 +16,6 @@
  * SuperH specific I/O (raw I/O to on-chip CPU peripherals). In practice
  * these have the same semantics as the __raw variants, and as such, all
  * new code should be using the __raw versions.
- *
- * All ISA I/O routines are wrapped through the machine vector. If a
- * board does not provide overrides, a generic set that are copied in
- * from the default machine vector are used instead. These are largely
- * for old compat code for I/O offseting to SuperIOs, all of which are
- * better handled through the machvec ioport mapping routines these days.
  */
 #include <linux/errno.h>
 #include <asm/cache.h>
@@ -31,39 +26,10 @@
 #include <asm-generic/iomap.h>
 
 #ifdef __KERNEL__
-/*
- * Depending on which platform we are running on, we need different
- * I/O functions.
- */
-#define __IO_PREFIX	generic
+#define __IO_PREFIX     generic
 #include <asm/io_generic.h>
 #include <asm/io_trapped.h>
 
-#ifdef CONFIG_HAS_IOPORT
-
-#define inb(p)			sh_mv.mv_inb((p))
-#define inw(p)			sh_mv.mv_inw((p))
-#define inl(p)			sh_mv.mv_inl((p))
-#define outb(x,p)		sh_mv.mv_outb((x),(p))
-#define outw(x,p)		sh_mv.mv_outw((x),(p))
-#define outl(x,p)		sh_mv.mv_outl((x),(p))
-
-#define inb_p(p)		sh_mv.mv_inb_p((p))
-#define inw_p(p)		sh_mv.mv_inw_p((p))
-#define inl_p(p)		sh_mv.mv_inl_p((p))
-#define outb_p(x,p)		sh_mv.mv_outb_p((x),(p))
-#define outw_p(x,p)		sh_mv.mv_outw_p((x),(p))
-#define outl_p(x,p)		sh_mv.mv_outl_p((x),(p))
-
-#define insb(p,b,c)		sh_mv.mv_insb((p), (b), (c))
-#define insw(p,b,c)		sh_mv.mv_insw((p), (b), (c))
-#define insl(p,b,c)		sh_mv.mv_insl((p), (b), (c))
-#define outsb(p,b,c)		sh_mv.mv_outsb((p), (b), (c))
-#define outsw(p,b,c)		sh_mv.mv_outsw((p), (b), (c))
-#define outsl(p,b,c)		sh_mv.mv_outsl((p), (b), (c))
-
-#endif
-
 #define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile u8  __force *)(a) = (v))
 #define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile u16 __force *)(a) = (v))
 #define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile u32 __force *)(a) = (v))
@@ -74,68 +40,39 @@
 #define __raw_readl(a)		(__chk_io_ptr(a), *(volatile u32 __force *)(a))
 #define __raw_readq(a)		(__chk_io_ptr(a), *(volatile u64 __force *)(a))
 
-#define readb(a)		({ u8  r_ = __raw_readb(a); mb(); r_; })
-#define readw(a)		({ u16 r_ = __raw_readw(a); mb(); r_; })
-#define readl(a)		({ u32 r_ = __raw_readl(a); mb(); r_; })
-#define readq(a)		({ u64 r_ = __raw_readq(a); mb(); r_; })
-
-#define writeb(v,a)		({ __raw_writeb((v),(a)); mb(); })
-#define writew(v,a)		({ __raw_writew((v),(a)); mb(); })
-#define writel(v,a)		({ __raw_writel((v),(a)); mb(); })
-#define writeq(v,a)		({ __raw_writeq((v),(a)); mb(); })
-
-/*
- * Legacy SuperH on-chip I/O functions
- *
- * These are all deprecated, all new (and especially cross-platform) code
- * should be using the __raw_xxx() routines directly.
- */
-static inline u8 __deprecated ctrl_inb(unsigned long addr)
-{
-	return __raw_readb(addr);
-}
-
-static inline u16 __deprecated ctrl_inw(unsigned long addr)
-{
-	return __raw_readw(addr);
-}
-
-static inline u32 __deprecated ctrl_inl(unsigned long addr)
-{
-	return __raw_readl(addr);
-}
-
-static inline u64 __deprecated ctrl_inq(unsigned long addr)
-{
-	return __raw_readq(addr);
-}
-
-static inline void __deprecated ctrl_outb(u8 v, unsigned long addr)
-{
-	__raw_writeb(v, addr);
-}
-
-static inline void __deprecated ctrl_outw(u16 v, unsigned long addr)
-{
-	__raw_writew(v, addr);
-}
-
-static inline void __deprecated ctrl_outl(u32 v, unsigned long addr)
-{
-	__raw_writel(v, addr);
-}
-
-static inline void __deprecated ctrl_outq(u64 v, unsigned long addr)
-{
-	__raw_writeq(v, addr);
-}
-
-extern unsigned long generic_io_base;
-
-static inline void ctrl_delay(void)
-{
-	__raw_readw(generic_io_base);
-}
+#define readb_relaxed(c)	({ u8  __v = __raw_readb(c); __v; })
+#define readw_relaxed(c)	({ u16 __v = le16_to_cpu((__force __le16) \
+					__raw_readw(c)); __v; })
+#define readl_relaxed(c)	({ u32 __v = le32_to_cpu((__force __le32) \
+					__raw_readl(c)); __v; })
+#define readq_relaxed(c)	({ u64 __v = le64_to_cpu((__force __le64) \
+					__raw_readq(c)); __v; })
+
+#define writeb_relaxed(v,c)	((void)__raw_writeb(v,c))
+#define writew_relaxed(v,c)	((void)__raw_writew((__force u16) \
+					cpu_to_le16(v),c))
+#define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
+					cpu_to_le32(v),c))
+#define writeq_relaxed(v,c)	((void)__raw_writeq((__force u64) \
+					cpu_to_le64(v),c))
+
+#define readb(a)		({ u8  r_ = readb_relaxed(a); rmb(); r_; })
+#define readw(a)		({ u16 r_ = readw_relaxed(a); rmb(); r_; })
+#define readl(a)		({ u32 r_ = readl_relaxed(a); rmb(); r_; })
+#define readq(a)		({ u64 r_ = readq_relaxed(a); rmb(); r_; })
+
+#define writeb(v,a)		({ wmb(); writeb_relaxed((v),(a)); })
+#define writew(v,a)		({ wmb(); writew_relaxed((v),(a)); })
+#define writel(v,a)		({ wmb(); writel_relaxed((v),(a)); })
+#define writeq(v,a)		({ wmb(); writeq_relaxed((v),(a)); })
+
+#define readsb(p,d,l)		__raw_readsb(p,d,l)
+#define readsw(p,d,l)		__raw_readsw(p,d,l)
+#define readsl(p,d,l)		__raw_readsl(p,d,l)
+
+#define writesb(p,d,l)		__raw_writesb(p,d,l)
+#define writesw(p,d,l)		__raw_writesw(p,d,l)
+#define writesl(p,d,l)		__raw_writesl(p,d,l)
 
 #define __BUILD_UNCACHED_IO(bwlq, type)					\
 static inline type read##bwlq##_uncached(unsigned long addr)		\
@@ -159,10 +96,11 @@ __BUILD_UNCACHED_IO(w, u16)
 __BUILD_UNCACHED_IO(l, u32)
 __BUILD_UNCACHED_IO(q, u64)
 
-#define __BUILD_MEMORY_STRING(bwlq, type)				\
+#define __BUILD_MEMORY_STRING(pfx, bwlq, type)				\
 									\
-static inline void __raw_writes##bwlq(volatile void __iomem *mem,	\
-				const void *addr, unsigned int count)	\
+static inline void							\
+pfx##writes##bwlq(volatile void __iomem *mem, const void *addr,		\
+		  unsigned int count)					\
 {									\
 	const volatile type *__addr = addr;				\
 									\
@@ -172,8 +110,8 @@ static inline void __raw_writes##bwlq(volatile void __iomem *mem,	\
 	}								\
 }									\
 									\
-static inline void __raw_reads##bwlq(volatile void __iomem *mem,	\
-			       void *addr, unsigned int count)		\
+static inline void pfx##reads##bwlq(volatile void __iomem *mem,		\
+				    void *addr, unsigned int count)	\
 {									\
 	volatile type *__addr = addr;					\
 									\
@@ -183,85 +121,166 @@ static inline void __raw_reads##bwlq(volatile void __iomem *mem,	\
 	}								\
 }
 
-__BUILD_MEMORY_STRING(b, u8)
-__BUILD_MEMORY_STRING(w, u16)
+__BUILD_MEMORY_STRING(__raw_, b, u8)
+__BUILD_MEMORY_STRING(__raw_, w, u16)
 
 #ifdef CONFIG_SUPERH32
 void __raw_writesl(void __iomem *addr, const void *data, int longlen);
 void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 #else
-__BUILD_MEMORY_STRING(l, u32)
+__BUILD_MEMORY_STRING(__raw_, l, u32)
 #endif
 
-__BUILD_MEMORY_STRING(q, u64)
-
-#define writesb			__raw_writesb
-#define writesw			__raw_writesw
-#define writesl			__raw_writesl
-
-#define readsb			__raw_readsb
-#define readsw			__raw_readsw
-#define readsl			__raw_readsl
-
-#define readb_relaxed(a)	readb(a)
-#define readw_relaxed(a)	readw(a)
-#define readl_relaxed(a)	readl(a)
-#define readq_relaxed(a)	readq(a)
-
-#ifndef CONFIG_GENERIC_IOMAP
-/* Simple MMIO */
-#define ioread8(a)		__raw_readb(a)
-#define ioread16(a)		__raw_readw(a)
-#define ioread16be(a)		be16_to_cpu(__raw_readw((a)))
-#define ioread32(a)		__raw_readl(a)
-#define ioread32be(a)		be32_to_cpu(__raw_readl((a)))
-
-#define iowrite8(v,a)		__raw_writeb((v),(a))
-#define iowrite16(v,a)		__raw_writew((v),(a))
-#define iowrite16be(v,a)	__raw_writew(cpu_to_be16((v)),(a))
-#define iowrite32(v,a)		__raw_writel((v),(a))
-#define iowrite32be(v,a)	__raw_writel(cpu_to_be32((v)),(a))
-
-#define ioread8_rep(a, d, c)	__raw_readsb((a), (d), (c))
-#define ioread16_rep(a, d, c)	__raw_readsw((a), (d), (c))
-#define ioread32_rep(a, d, c)	__raw_readsl((a), (d), (c))
-
-#define iowrite8_rep(a, s, c)	__raw_writesb((a), (s), (c))
-#define iowrite16_rep(a, s, c)	__raw_writesw((a), (s), (c))
-#define iowrite32_rep(a, s, c)	__raw_writesl((a), (s), (c))
+__BUILD_MEMORY_STRING(__raw_, q, u64)
+
+#ifdef CONFIG_HAS_IOPORT
+
+/*
+ * Slowdown I/O port space accesses for antique hardware.
+ */
+#undef CONF_SLOWDOWN_IO
+
+/*
+ * On SuperH I/O ports are memory mapped, so we access them using normal
+ * load/store instructions. sh_io_port_base is the virtual address to
+ * which all ports are being mapped.
+ */
+extern const unsigned long sh_io_port_base;
+
+static inline void __set_io_port_base(unsigned long pbase)
+{
+	*(unsigned long *)&sh_io_port_base = pbase;
+	barrier();
+}
+
+#ifdef CONFIG_GENERIC_IOMAP
+#define __ioport_map ioport_map
+#else
+extern void __iomem *__ioport_map(unsigned long addr, unsigned int size);
 #endif
 
-#define mmio_insb(p,d,c)	__raw_readsb(p,d,c)
-#define mmio_insw(p,d,c)	__raw_readsw(p,d,c)
-#define mmio_insl(p,d,c)	__raw_readsl(p,d,c)
+#ifdef CONF_SLOWDOWN_IO
+#define SLOW_DOWN_IO __raw_readw(sh_io_port_base)
+#else
+#define SLOW_DOWN_IO
+#endif
 
-#define mmio_outsb(p,s,c)	__raw_writesb(p,s,c)
-#define mmio_outsw(p,s,c)	__raw_writesw(p,s,c)
-#define mmio_outsl(p,s,c)	__raw_writesl(p,s,c)
+#define __BUILD_IOPORT_SINGLE(pfx, bwlq, type, p, slow)			\
+									\
+static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
+{									\
+	volatile type *__addr;						\
+									\
+	__addr = __ioport_map(port, sizeof(type));			\
+	*__addr = val;							\
+	slow;								\
+}									\
+									\
+static inline type pfx##in##bwlq##p(unsigned long port)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = __ioport_map(port, sizeof(type));			\
+	__val = *__addr;						\
+	slow;								\
+									\
+	return __val;							\
+}
 
-/* synco on SH-4A, otherwise a nop */
-#define mmiowb()		wmb()
+#define __BUILD_IOPORT_PFX(bus, bwlq, type)				\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, ,)			\
+	__BUILD_IOPORT_SINGLE(bus, bwlq, type, _p, SLOW_DOWN_IO)
 
-#define IO_SPACE_LIMIT 0xffffffff
+#define BUILDIO_IOPORT(bwlq, type)					\
+	__BUILD_IOPORT_PFX(, bwlq, type)
 
-#ifdef CONFIG_HAS_IOPORT
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+BUILDIO_IOPORT(q, u64)
+
+#define __BUILD_IOPORT_STRING(bwlq, type)				\
+									\
+static inline void outs##bwlq(unsigned long port, const void *addr,	\
+			      unsigned int count)			\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		out##bwlq(*__addr, port);				\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void ins##bwlq(unsigned long port, void *addr,		\
+			     unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = in##bwlq(port);				\
+		__addr++;						\
+	}								\
+}
+
+__BUILD_IOPORT_STRING(b, u8)
+__BUILD_IOPORT_STRING(w, u16)
+__BUILD_IOPORT_STRING(l, u32)
+__BUILD_IOPORT_STRING(q, u64)
+
+#endif
 
 /*
- * This function provides a method for the generic case where a
- * board-specific ioport_map simply needs to return the port + some
- * arbitrary port base.
+ * Legacy SuperH on-chip I/O functions
  *
- * We use this at board setup time to implicitly set the port base, and
- * as a result, we can use the generic ioport_map.
+ * These are all deprecated, all new (and especially cross-platform) code
+ * should be using the __raw_xxx() routines directly.
  */
-static inline void __set_io_port_base(unsigned long pbase)
+static inline u8 __deprecated ctrl_inb(unsigned long addr)
 {
-	generic_io_base = pbase;
+	return __raw_readb(addr);
 }
 
-#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
+static inline u16 __deprecated ctrl_inw(unsigned long addr)
+{
+	return __raw_readw(addr);
+}
 
-#endif
+static inline u32 __deprecated ctrl_inl(unsigned long addr)
+{
+	return __raw_readl(addr);
+}
+
+static inline u64 __deprecated ctrl_inq(unsigned long addr)
+{
+	return __raw_readq(addr);
+}
+
+static inline void __deprecated ctrl_outb(u8 v, unsigned long addr)
+{
+	__raw_writeb(v, addr);
+}
+
+static inline void __deprecated ctrl_outw(u16 v, unsigned long addr)
+{
+	__raw_writew(v, addr);
+}
+
+static inline void __deprecated ctrl_outl(u32 v, unsigned long addr)
+{
+	__raw_writel(v, addr);
+}
+
+static inline void __deprecated ctrl_outq(u64 v, unsigned long addr)
+{
+	__raw_writeq(v, addr);
+}
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* synco on SH-4A, otherwise a nop */
+#define mmiowb()		wmb()
 
 /* We really want to try and get these to memcpy etc */
 void memcpy_fromio(void *, const volatile void __iomem *, unsigned long);
@@ -395,10 +414,6 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
 #define ioremap_nocache	ioremap
 #define iounmap		__iounmap
 
-#define maybebadio(port) \
-	printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
-	       __func__, __LINE__, (port), (u32)__builtin_return_address(0))
-
 /*
  * Convert a physical pointer to a virtual kernel pointer for /dev/mem
  * access
diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h
index 491df93cbf8..b5f6956f19c 100644
--- a/arch/sh/include/asm/io_generic.h
+++ b/arch/sh/include/asm/io_generic.h
@@ -11,31 +11,6 @@
 #error "Don't include this header without a valid system prefix"
 #endif
 
-u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long);
-u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long);
-u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long);
-
-void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long);
-
-u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long);
-u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long);
-u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long);
-void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long);
-void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long);
-
-void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count);
-void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count);
-
-void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size);
-void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr);
-
 void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
 void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
 void IO_CONCAT(__IO_PREFIX,mem_init)(void);
diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h
index eb6c4c68797..84e85a79263 100644
--- a/arch/sh/include/asm/ioctls.h
+++ b/arch/sh/include/asm/ioctls.h
@@ -85,6 +85,7 @@
 #define TCSETSF2	_IOW('T', 45, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	_IO('T', 83) /* 0x5453 */
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
index a0b0cf79cf8..dd5d6e5bf20 100644
--- a/arch/sh/include/asm/machvec.h
+++ b/arch/sh/include/asm/machvec.h
@@ -23,27 +23,6 @@ struct sh_machine_vector {
 	void (*mv_init_irq)(void);
 
 #ifdef CONFIG_HAS_IOPORT
-	u8 (*mv_inb)(unsigned long);
-	u16 (*mv_inw)(unsigned long);
-	u32 (*mv_inl)(unsigned long);
-	void (*mv_outb)(u8, unsigned long);
-	void (*mv_outw)(u16, unsigned long);
-	void (*mv_outl)(u32, unsigned long);
-
-	u8 (*mv_inb_p)(unsigned long);
-	u16 (*mv_inw_p)(unsigned long);
-	u32 (*mv_inl_p)(unsigned long);
-	void (*mv_outb_p)(u8, unsigned long);
-	void (*mv_outw_p)(u16, unsigned long);
-	void (*mv_outl_p)(u32, unsigned long);
-
-	void (*mv_insb)(unsigned long, void *dst, unsigned long count);
-	void (*mv_insw)(unsigned long, void *dst, unsigned long count);
-	void (*mv_insl)(unsigned long, void *dst, unsigned long count);
-	void (*mv_outsb)(unsigned long, const void *src, unsigned long count);
-	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
-	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
-
 	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
 	void (*mv_ioport_unmap)(void __iomem *);
 #endif
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
index 46d5179c9f4..e3c73cdd8c9 100644
--- a/arch/sh/include/asm/processor_32.h
+++ b/arch/sh/include/asm/processor_32.h
@@ -199,10 +199,13 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define ARCH_HAS_PREFETCHW
 static inline void prefetch(void *x)
 {
-	__asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
+	__builtin_prefetch(x, 0, 3);
 }
 
-#define prefetchw(x)	prefetch(x)
+static inline void prefetchw(void *x)
+{
+	__builtin_prefetch(x, 1, 3);
+}
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
index f6edc10aa0d..de167d3a1a8 100644
--- a/arch/sh/include/asm/ptrace.h
+++ b/arch/sh/include/asm/ptrace.h
@@ -40,8 +40,8 @@
 #include <asm/system.h>
 
 #define user_mode(regs)			(((regs)->sr & 0x40000000)==0)
-#define user_stack_pointer(regs)	((unsigned long)(regs)->regs[15])
-#define kernel_stack_pointer(regs)	((unsigned long)(regs)->regs[15])
+#define user_stack_pointer(_regs)	((unsigned long)(_regs)->regs[15])
+#define kernel_stack_pointer(_regs)	((unsigned long)(_regs)->regs[15])
 #define instruction_pointer(regs)	((unsigned long)(regs)->pc)
 
 extern void show_regs(struct pt_regs *);
diff --git a/arch/sh/include/asm/ptrace_32.h b/arch/sh/include/asm/ptrace_32.h
index 35d9e257558..6c2239cca1a 100644
--- a/arch/sh/include/asm/ptrace_32.h
+++ b/arch/sh/include/asm/ptrace_32.h
@@ -76,7 +76,7 @@ struct pt_dspregs {
 #ifdef __KERNEL__
 
 #define MAX_REG_OFFSET		offsetof(struct pt_regs, tra)
-#define regs_return_value(regs)	((regs)->regs[0])
+#define regs_return_value(_regs)	((_regs)->regs[0])
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/sh/include/asm/ptrace_64.h b/arch/sh/include/asm/ptrace_64.h
index d43c1cb0bbe..bf9be7764d6 100644
--- a/arch/sh/include/asm/ptrace_64.h
+++ b/arch/sh/include/asm/ptrace_64.h
@@ -13,7 +13,7 @@ struct pt_regs {
 #ifdef __KERNEL__
 
 #define MAX_REG_OFFSET		offsetof(struct pt_regs, tregs[7])
-#define regs_return_value(regs)	((regs)->regs[3])
+#define regs_return_value(_regs)	((_regs)->regs[3])
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/sh/include/asm/unaligned-sh4a.h b/arch/sh/include/asm/unaligned-sh4a.h
index 9f4dd252c98..c48a9c3420d 100644
--- a/arch/sh/include/asm/unaligned-sh4a.h
+++ b/arch/sh/include/asm/unaligned-sh4a.h
@@ -18,10 +18,20 @@
  * of spill registers and blowing up when building at low optimization
  * levels. See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34777.
  */
+#include <linux/unaligned/packed_struct.h>
 #include <linux/types.h>
 #include <asm/byteorder.h>
 
-static __always_inline u32 __get_unaligned_cpu32(const u8 *p)
+static inline u16 sh4a_get_unaligned_cpu16(const u8 *p)
+{
+#ifdef __LITTLE_ENDIAN
+	return p[0] | p[1] << 8;
+#else
+	return p[0] << 8 | p[1];
+#endif
+}
+
+static __always_inline u32 sh4a_get_unaligned_cpu32(const u8 *p)
 {
 	unsigned long unaligned;
 
@@ -34,218 +44,148 @@ static __always_inline u32 __get_unaligned_cpu32(const u8 *p)
 	return unaligned;
 }
 
-struct __una_u16 { u16 x __attribute__((packed)); };
-struct __una_u32 { u32 x __attribute__((packed)); };
-struct __una_u64 { u64 x __attribute__((packed)); };
-
-static inline u16 __get_unaligned_cpu16(const u8 *p)
-{
-#ifdef __LITTLE_ENDIAN
-	return p[0] | p[1] << 8;
-#else
-	return p[0] << 8 | p[1];
-#endif
-}
-
 /*
  * Even though movua.l supports auto-increment on the read side, it can
  * only store to r0 due to instruction encoding constraints, so just let
  * the compiler sort it out on its own.
  */
-static inline u64 __get_unaligned_cpu64(const u8 *p)
+static inline u64 sh4a_get_unaligned_cpu64(const u8 *p)
 {
 #ifdef __LITTLE_ENDIAN
-	return (u64)__get_unaligned_cpu32(p + 4) << 32 |
-		    __get_unaligned_cpu32(p);
+	return (u64)sh4a_get_unaligned_cpu32(p + 4) << 32 |
+		    sh4a_get_unaligned_cpu32(p);
 #else
-	return (u64)__get_unaligned_cpu32(p) << 32 |
-		    __get_unaligned_cpu32(p + 4);
+	return (u64)sh4a_get_unaligned_cpu32(p) << 32 |
+		    sh4a_get_unaligned_cpu32(p + 4);
 #endif
 }
 
 static inline u16 get_unaligned_le16(const void *p)
 {
-	return le16_to_cpu(__get_unaligned_cpu16(p));
+	return le16_to_cpu(sh4a_get_unaligned_cpu16(p));
 }
 
 static inline u32 get_unaligned_le32(const void *p)
 {
-	return le32_to_cpu(__get_unaligned_cpu32(p));
+	return le32_to_cpu(sh4a_get_unaligned_cpu32(p));
 }
 
 static inline u64 get_unaligned_le64(const void *p)
 {
-	return le64_to_cpu(__get_unaligned_cpu64(p));
+	return le64_to_cpu(sh4a_get_unaligned_cpu64(p));
 }
 
 static inline u16 get_unaligned_be16(const void *p)
 {
-	return be16_to_cpu(__get_unaligned_cpu16(p));
+	return be16_to_cpu(sh4a_get_unaligned_cpu16(p));
 }
 
 static inline u32 get_unaligned_be32(const void *p)
 {
-	return be32_to_cpu(__get_unaligned_cpu32(p));
+	return be32_to_cpu(sh4a_get_unaligned_cpu32(p));
 }
 
 static inline u64 get_unaligned_be64(const void *p)
 {
-	return be64_to_cpu(__get_unaligned_cpu64(p));
+	return be64_to_cpu(sh4a_get_unaligned_cpu64(p));
 }
 
-static inline void __put_le16_noalign(u8 *p, u16 val)
+static inline void nonnative_put_le16(u16 val, u8 *p)
 {
 	*p++ = val;
 	*p++ = val >> 8;
 }
 
-static inline void __put_le32_noalign(u8 *p, u32 val)
+static inline void nonnative_put_le32(u32 val, u8 *p)
 {
-	__put_le16_noalign(p, val);
-	__put_le16_noalign(p + 2, val >> 16);
+	nonnative_put_le16(val, p);
+	nonnative_put_le16(val >> 16, p + 2);
 }
 
-static inline void __put_le64_noalign(u8 *p, u64 val)
+static inline void nonnative_put_le64(u64 val, u8 *p)
 {
-	__put_le32_noalign(p, val);
-	__put_le32_noalign(p + 4, val >> 32);
+	nonnative_put_le32(val, p);
+	nonnative_put_le32(val >> 32, p + 4);
 }
 
-static inline void __put_be16_noalign(u8 *p, u16 val)
+static inline void nonnative_put_be16(u16 val, u8 *p)
 {
 	*p++ = val >> 8;
 	*p++ = val;
 }
 
-static inline void __put_be32_noalign(u8 *p, u32 val)
+static inline void nonnative_put_be32(u32 val, u8 *p)
 {
-	__put_be16_noalign(p, val >> 16);
-	__put_be16_noalign(p + 2, val);
+	nonnative_put_be16(val >> 16, p);
+	nonnative_put_be16(val, p + 2);
 }
 
-static inline void __put_be64_noalign(u8 *p, u64 val)
+static inline void nonnative_put_be64(u64 val, u8 *p)
 {
-	__put_be32_noalign(p, val >> 32);
-	__put_be32_noalign(p + 4, val);
+	nonnative_put_be32(val >> 32, p);
+	nonnative_put_be32(val, p + 4);
 }
 
 static inline void put_unaligned_le16(u16 val, void *p)
 {
 #ifdef __LITTLE_ENDIAN
-	((struct __una_u16 *)p)->x = val;
+	__put_unaligned_cpu16(val, p);
 #else
-	__put_le16_noalign(p, val);
+	nonnative_put_le16(val, p);
 #endif
 }
 
 static inline void put_unaligned_le32(u32 val, void *p)
 {
 #ifdef __LITTLE_ENDIAN
-	((struct __una_u32 *)p)->x = val;
+	__put_unaligned_cpu32(val, p);
 #else
-	__put_le32_noalign(p, val);
+	nonnative_put_le32(val, p);
 #endif
 }
 
 static inline void put_unaligned_le64(u64 val, void *p)
 {
 #ifdef __LITTLE_ENDIAN
-	((struct __una_u64 *)p)->x = val;
+	__put_unaligned_cpu64(val, p);
 #else
-	__put_le64_noalign(p, val);
+	nonnative_put_le64(val, p);
 #endif
 }
 
 static inline void put_unaligned_be16(u16 val, void *p)
 {
 #ifdef __BIG_ENDIAN
-	((struct __una_u16 *)p)->x = val;
+	__put_unaligned_cpu16(val, p);
 #else
-	__put_be16_noalign(p, val);
+	nonnative_put_be16(val, p);
 #endif
 }
 
 static inline void put_unaligned_be32(u32 val, void *p)
 {
 #ifdef __BIG_ENDIAN
-	((struct __una_u32 *)p)->x = val;
+	__put_unaligned_cpu32(val, p);
 #else
-	__put_be32_noalign(p, val);
+	nonnative_put_be32(val, p);
 #endif
 }
 
 static inline void put_unaligned_be64(u64 val, void *p)
 {
 #ifdef __BIG_ENDIAN
-	((struct __una_u64 *)p)->x = val;
+	__put_unaligned_cpu64(val, p);
 #else
-	__put_be64_noalign(p, val);
+	nonnative_put_be64(val, p);
 #endif
 }
 
 /*
- * Cause a link-time error if we try an unaligned access other than
- * 1,2,4 or 8 bytes long
+ * While it's a bit non-obvious, even though the generic le/be wrappers
+ * use the __get/put_xxx prefixing, they actually wrap in to the
+ * non-prefixed get/put_xxx variants as provided above.
  */
-extern void __bad_unaligned_access_size(void);
-
-#define __get_unaligned_le(ptr) ((__force typeof(*(ptr)))({			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_le16((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_le32((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_le64((ptr)),	\
-	__bad_unaligned_access_size()))));					\
-	}))
-
-#define __get_unaligned_be(ptr) ((__force typeof(*(ptr)))({			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 1, *(ptr),			\
-	__builtin_choose_expr(sizeof(*(ptr)) == 2, get_unaligned_be16((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 4, get_unaligned_be32((ptr)),	\
-	__builtin_choose_expr(sizeof(*(ptr)) == 8, get_unaligned_be64((ptr)),	\
-	__bad_unaligned_access_size()))));					\
-	}))
-
-#define __put_unaligned_le(val, ptr) ({					\
-	void *__gu_p = (ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		*(u8 *)__gu_p = (__force u8)(val);			\
-		break;							\
-	case 2:								\
-		put_unaligned_le16((__force u16)(val), __gu_p);		\
-		break;							\
-	case 4:								\
-		put_unaligned_le32((__force u32)(val), __gu_p);		\
-		break;							\
-	case 8:								\
-		put_unaligned_le64((__force u64)(val), __gu_p);		\
-		break;							\
-	default:							\
-		__bad_unaligned_access_size();				\
-		break;							\
-	}								\
-	(void)0; })
-
-#define __put_unaligned_be(val, ptr) ({					\
-	void *__gu_p = (ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		*(u8 *)__gu_p = (__force u8)(val);			\
-		break;							\
-	case 2:								\
-		put_unaligned_be16((__force u16)(val), __gu_p);		\
-		break;							\
-	case 4:								\
-		put_unaligned_be32((__force u32)(val), __gu_p);		\
-		break;							\
-	case 8:								\
-		put_unaligned_be64((__force u64)(val), __gu_p);		\
-		break;							\
-	default:							\
-		__bad_unaligned_access_size();				\
-		break;							\
-	}								\
-	(void)0; })
+#include <linux/unaligned/generic.h>
 
 #ifdef __LITTLE_ENDIAN
 # define get_unaligned __get_unaligned_le
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
index 903cd618eb7..d6741fca89a 100644
--- a/arch/sh/include/asm/unistd_32.h
+++ b/arch/sh/include/asm/unistd_32.h
@@ -368,8 +368,9 @@
 #define __NR_sendmsg		355
 #define __NR_recvmsg		356
 #define __NR_recvmmsg		357
+#define __NR_accept4		358
 
-#define NR_syscalls 358
+#define NR_syscalls 359
 
 #ifdef __KERNEL__
 
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h
index 4c27b68789b..7eb43599942 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7724.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h
@@ -303,4 +303,7 @@ enum {
 	SHDMA_SLAVE_SDHI1_RX,
 };
 
+extern struct clk sh7724_fsimcka_clk;
+extern struct clk sh7724_fsimckb_clk;
+
 #endif /* __ASM_SH7724_H__ */
diff --git a/arch/sh/include/mach-common/mach/romimage.h b/arch/sh/include/mach-common/mach/romimage.h
index 08fb42269ec..3670455faaa 100644
--- a/arch/sh/include/mach-common/mach/romimage.h
+++ b/arch/sh/include/mach-common/mach/romimage.h
@@ -4,7 +4,7 @@
 
 #else /* __ASSEMBLY__ */
 
-extern inline void mmcif_update_progress(int nr)
+static inline void mmcif_update_progress(int nr)
 {
 }
 
diff --git a/arch/sh/include/mach-ecovec24/mach/romimage.h b/arch/sh/include/mach-ecovec24/mach/romimage.h
index 1dcf5e6c8d8..d63ef51ec18 100644
--- a/arch/sh/include/mach-ecovec24/mach/romimage.h
+++ b/arch/sh/include/mach-ecovec24/mach/romimage.h
@@ -35,7 +35,7 @@
 #define HIZCRA		0xa4050158
 #define PGDR		0xa405012c
 
-extern inline void mmcif_update_progress(int nr)
+static inline void mmcif_update_progress(int nr)
 {
 	/* disable Hi-Z for LED pins */
 	__raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA);
diff --git a/arch/sh/include/mach-kfr2r09/mach/romimage.h b/arch/sh/include/mach-kfr2r09/mach/romimage.h
index 976256a323f..7a883167c84 100644
--- a/arch/sh/include/mach-kfr2r09/mach/romimage.h
+++ b/arch/sh/include/mach-kfr2r09/mach/romimage.h
@@ -23,7 +23,7 @@
 
 #else /* __ASSEMBLY__ */
 
-extern inline void mmcif_update_progress(int nr)
+static inline void mmcif_update_progress(int nr)
 {
 }
 
diff --git a/arch/sh/include/mach-sdk7786/mach/fpga.h b/arch/sh/include/mach-sdk7786/mach/fpga.h
index 40f0c2d3690..a9cdac46992 100644
--- a/arch/sh/include/mach-sdk7786/mach/fpga.h
+++ b/arch/sh/include/mach-sdk7786/mach/fpga.h
@@ -14,11 +14,16 @@
 #define INTTESTR	0x040
 #define SYSSR		0x050
 #define NRGPR		0x060
+
 #define NMISR		0x070
+#define  NMISR_MAN_NMI	BIT(0)
+#define  NMISR_AUX_NMI	BIT(1)
+#define  NMISR_MASK	(NMISR_MAN_NMI | NMISR_AUX_NMI)
 
 #define NMIMR		0x080
 #define  NMIMR_MAN_NMIM	BIT(0)	/* Manual NMI mask */
 #define  NMIMR_AUX_NMIM	BIT(1)	/* Auxiliary NMI mask */
+#define  NMIMR_MASK	(NMIMR_MAN_NMIM | NMIMR_AUX_NMIM)
 
 #define INTBSR		0x090
 #define INTBMR		0x0a0
@@ -126,6 +131,9 @@
 extern void __iomem *sdk7786_fpga_base;
 extern void sdk7786_fpga_init(void);
 
+/* arch/sh/boards/mach-sdk7786/nmi.c */
+extern void sdk7786_nmi_init(void);
+
 #define SDK7786_FPGA_REGADDR(reg)	(sdk7786_fpga_base + (reg))
 
 /*
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 8eed6a48544..77f7ae1d464 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -11,7 +11,7 @@ endif
 
 CFLAGS_REMOVE_return_address.o = -pg
 
-obj-y	:= clkdev.o debugtraps.o dma-nommu.o dumpstack.o 		\
+obj-y	:= debugtraps.o dma-nommu.o dumpstack.o 		\
 	   idle.o io.o irq.o irq_$(BITS).o kdebugfs.o			\
 	   machvec.o nmi_debug.o process.o				\
 	   process_$(BITS).o ptrace.o ptrace_$(BITS).o			\
@@ -20,6 +20,11 @@ obj-y	:= clkdev.o debugtraps.o dma-nommu.o dumpstack.o 		\
 	   syscalls_$(BITS).o time.o topology.o traps.o			\
 	   traps_$(BITS).o unwinder.o
 
+ifndef CONFIG_GENERIC_IOMAP
+obj-y				+= iomap.o
+obj-$(CONFIG_HAS_IOPORT)	+= ioport.o
+endif
+
 obj-y				+= cpu/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/
 obj-$(CONFIG_SMP)		+= smp.o
@@ -39,7 +44,6 @@ obj-$(CONFIG_DUMP_CODE)		+= disassemble.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o
 obj-$(CONFIG_DWARF_UNWINDER)	+= dwarf.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_event.o perf_callchain.o
-obj-$(CONFIG_HAS_IOPORT)	+= io_generic.o
 
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)		+= hw_breakpoint.o
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
diff --git a/arch/sh/kernel/clkdev.c b/arch/sh/kernel/clkdev.c
deleted file mode 100644
index 1f800ef4a73..00000000000
--- a/arch/sh/kernel/clkdev.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * arch/sh/kernel/clkdev.c
- *
- * Cloned from arch/arm/common/clkdev.c:
- *
- *  Copyright (C) 2008 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Helper for the clk API to assist looking up a struct clk.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-#include <linux/bootmem.h>
-#include <linux/mm.h>
-#include <asm/clock.h>
-#include <asm/clkdev.h>
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-/*
- * Find the correct struct clk for the device and connection ID.
- * We do slightly fuzzy matching here:
- *  An entry with a NULL ID is assumed to be a wildcard.
- *  If an entry has a device ID, it must match
- *  If an entry has a connection ID, it must match
- * Then we take the most specific entry - with the following
- * order of precedence: dev+con > dev only > con only.
- */
-static struct clk *clk_find(const char *dev_id, const char *con_id)
-{
-	struct clk_lookup *p;
-	struct clk *clk = NULL;
-	int match, best = 0;
-
-	list_for_each_entry(p, &clocks, node) {
-		match = 0;
-		if (p->dev_id) {
-			if (!dev_id || strcmp(p->dev_id, dev_id))
-				continue;
-			match += 2;
-		}
-		if (p->con_id) {
-			if (!con_id || strcmp(p->con_id, con_id))
-				continue;
-			match += 1;
-		}
-		if (match == 0)
-			continue;
-
-		if (match > best) {
-			clk = p->clk;
-			best = match;
-		}
-	}
-	return clk;
-}
-
-struct clk *clk_get_sys(const char *dev_id, const char *con_id)
-{
-	struct clk *clk;
-
-	mutex_lock(&clocks_mutex);
-	clk = clk_find(dev_id, con_id);
-	mutex_unlock(&clocks_mutex);
-
-	return clk ? clk : ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get_sys);
-
-void clkdev_add(struct clk_lookup *cl)
-{
-	mutex_lock(&clocks_mutex);
-	list_add_tail(&cl->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clkdev_add);
-
-void __init clkdev_add_table(struct clk_lookup *cl, size_t num)
-{
-	mutex_lock(&clocks_mutex);
-	while (num--) {
-		list_add_tail(&cl->node, &clocks);
-		cl++;
-	}
-	mutex_unlock(&clocks_mutex);
-}
-
-#define MAX_DEV_ID	20
-#define MAX_CON_ID	16
-
-struct clk_lookup_alloc {
-	struct clk_lookup cl;
-	char	dev_id[MAX_DEV_ID];
-	char	con_id[MAX_CON_ID];
-};
-
-struct clk_lookup * __init_refok
-clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...)
-{
-	struct clk_lookup_alloc *cla;
-
-	if (!slab_is_available())
-		cla = alloc_bootmem_low_pages(sizeof(*cla));
-	else
-		cla = kzalloc(sizeof(*cla), GFP_KERNEL);
-
-	if (!cla)
-		return NULL;
-
-	cla->cl.clk = clk;
-	if (con_id) {
-		strlcpy(cla->con_id, con_id, sizeof(cla->con_id));
-		cla->cl.con_id = cla->con_id;
-	}
-
-	if (dev_fmt) {
-		va_list ap;
-
-		va_start(ap, dev_fmt);
-		vscnprintf(cla->dev_id, sizeof(cla->dev_id), dev_fmt, ap);
-		cla->cl.dev_id = cla->dev_id;
-		va_end(ap);
-	}
-
-	return &cla->cl;
-}
-EXPORT_SYMBOL(clkdev_alloc);
-
-int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
-	struct device *dev)
-{
-	struct clk *r = clk_get(dev, id);
-	struct clk_lookup *l;
-
-	if (IS_ERR(r))
-		return PTR_ERR(r);
-
-	l = clkdev_alloc(r, alias, alias_dev_name);
-	clk_put(r);
-	if (!l)
-		return -ENODEV;
-	clkdev_add(l);
-	return 0;
-}
-EXPORT_SYMBOL(clk_add_alias);
-
-/*
- * clkdev_drop - remove a clock dynamically allocated
- */
-void clkdev_drop(struct clk_lookup *cl)
-{
-	struct clk_lookup_alloc *cla = container_of(cl, struct clk_lookup_alloc, cl);
-
-	mutex_lock(&clocks_mutex);
-	list_del(&cl->node);
-	mutex_unlock(&clocks_mutex);
-	kfree(cla);
-}
-EXPORT_SYMBOL(clkdev_drop);
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 4edcb60a135..d49c2135fd4 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -20,4 +20,4 @@ obj-$(CONFIG_SH_CLK_CPG_LEGACY)	+= clock-cpg.o
 obj-$(CONFIG_SH_FPU)		+= fpu.o
 obj-$(CONFIG_SH_FPU_EMU)	+= fpu.o
 
-obj-y	+= irq/ init.o clock.o hwblk.o
+obj-y	+= irq/ init.o clock.o hwblk.o proc.o
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index e2f63d68da5..dd0e0f21135 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -2,7 +2,7 @@
 #include <linux/compiler.h>
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 
 static struct clk master_clk = {
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 50f887dda56..4187cf4fe18 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -48,20 +48,4 @@ int __init clk_init(void)
 	return ret;
 }
 
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk *clk_get(struct device *dev, const char *con_id)
-{
-	const char *dev_id = dev ? dev_name(dev) : NULL;
-
-	return clk_get_sys(dev_id, con_id);
-}
-EXPORT_SYMBOL_GPL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL_GPL(clk_put);
 
diff --git a/arch/sh/kernel/cpu/proc.c b/arch/sh/kernel/cpu/proc.c
new file mode 100644
index 00000000000..e80a936f409
--- /dev/null
+++ b/arch/sh/kernel/cpu/proc.c
@@ -0,0 +1,148 @@
+#include <linux/seq_file.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/machvec.h>
+#include <asm/processor.h>
+
+static const char *cpu_name[] = {
+	[CPU_SH7201]	= "SH7201",
+	[CPU_SH7203]	= "SH7203",	[CPU_SH7263]	= "SH7263",
+	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
+	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
+	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
+	[CPU_SH7709]	= "SH7709",	[CPU_SH7710]	= "SH7710",
+	[CPU_SH7712]	= "SH7712",	[CPU_SH7720]	= "SH7720",
+	[CPU_SH7721]	= "SH7721",	[CPU_SH7729]	= "SH7729",
+	[CPU_SH7750]	= "SH7750",	[CPU_SH7750S]	= "SH7750S",
+	[CPU_SH7750R]	= "SH7750R",	[CPU_SH7751]	= "SH7751",
+	[CPU_SH7751R]	= "SH7751R",	[CPU_SH7760]	= "SH7760",
+	[CPU_SH4_202]	= "SH4-202",	[CPU_SH4_501]	= "SH4-501",
+	[CPU_SH7763]	= "SH7763",	[CPU_SH7770]	= "SH7770",
+	[CPU_SH7780]	= "SH7780",	[CPU_SH7781]	= "SH7781",
+	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
+	[CPU_SH7786]	= "SH7786",	[CPU_SH7757]	= "SH7757",
+	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
+	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
+	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
+	[CPU_SH7366]	= "SH7366",	[CPU_SH7724]	= "SH7724",
+	[CPU_SH_NONE]	= "Unknown"
+};
+
+const char *get_cpu_subtype(struct sh_cpuinfo *c)
+{
+	return cpu_name[c->type];
+}
+EXPORT_SYMBOL(get_cpu_subtype);
+
+#ifdef CONFIG_PROC_FS
+/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
+static const char *cpu_flags[] = {
+	"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
+	"ptea", "llsc", "l2", "op32", "pteaex", NULL
+};
+
+static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
+{
+	unsigned long i;
+
+	seq_printf(m, "cpu flags\t:");
+
+	if (!c->flags) {
+		seq_printf(m, " %s\n", cpu_flags[0]);
+		return;
+	}
+
+	for (i = 0; cpu_flags[i]; i++)
+		if ((c->flags & (1 << i)))
+			seq_printf(m, " %s", cpu_flags[i+1]);
+
+	seq_printf(m, "\n");
+}
+
+static void show_cacheinfo(struct seq_file *m, const char *type,
+			   struct cache_info info)
+{
+	unsigned int cache_size;
+
+	cache_size = info.ways * info.sets * info.linesz;
+
+	seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
+		   type, cache_size >> 10, info.ways);
+}
+
+/*
+ *	Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	struct sh_cpuinfo *c = v;
+	unsigned int cpu = c - cpu_data;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	if (cpu == 0)
+		seq_printf(m, "machine\t\t: %s\n", get_system_type());
+	else
+		seq_printf(m, "\n");
+
+	seq_printf(m, "processor\t: %d\n", cpu);
+	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
+	seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
+	if (c->cut_major == -1)
+		seq_printf(m, "cut\t\t: unknown\n");
+	else if (c->cut_minor == -1)
+		seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
+	else
+		seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
+
+	show_cpuflags(m, c);
+
+	seq_printf(m, "cache type\t: ");
+
+	/*
+	 * Check for what type of cache we have, we support both the
+	 * unified cache on the SH-2 and SH-3, as well as the harvard
+	 * style cache on the SH-4.
+	 */
+	if (c->icache.flags & SH_CACHE_COMBINED) {
+		seq_printf(m, "unified\n");
+		show_cacheinfo(m, "cache", c->icache);
+	} else {
+		seq_printf(m, "split (harvard)\n");
+		show_cacheinfo(m, "icache", c->icache);
+		show_cacheinfo(m, "dcache", c->dcache);
+	}
+
+	/* Optional secondary cache */
+	if (c->flags & CPU_HAS_L2_CACHE)
+		show_cacheinfo(m, "scache", c->scache);
+
+	seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits);
+
+	seq_printf(m, "bogomips\t: %lu.%02lu\n",
+		     c->loops_per_jiffy/(500000/HZ),
+		     (c->loops_per_jiffy/(5000/HZ)) % 100);
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+const struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
+#endif /* CONFIG_PROC_FS */
diff --git a/arch/sh/kernel/cpu/sh2/clock-sh7619.c b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
index 0c9f24d7a02..5b7f12e58a8 100644
--- a/arch/sh/kernel/cpu/sh2/clock-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/clock-sh7619.c
@@ -14,24 +14,18 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/io.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
-#include <asm/io.h>
+#include <asm/processor.h>
 
 static const int pll1rate[] = {1,2};
 static const int pfc_divisors[] = {1,2,0,4};
-
-#if (CONFIG_SH_CLK_MD == 1) || (CONFIG_SH_CLK_MD == 2)
-#define PLL2 (4)
-#elif (CONFIG_SH_CLK_MD == 5) || (CONFIG_SH_CLK_MD == 6)
-#define PLL2 (2)
-#else
-#error "Illigal Clock Mode!"
-#endif
+static unsigned int pll2_mult;
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
+	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 7];
 }
 
 static struct clk_ops sh7619_master_clk_ops = {
@@ -70,6 +64,14 @@ static struct clk_ops *sh7619_clk_ops[] = {
 
 void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 {
+	if (test_mode_pin(MODE_PIN2 | MODE_PIN0) ||
+	    test_mode_pin(MODE_PIN2 | MODE_PIN1))
+		pll2_mult = 2;
+	else if (test_mode_pin(MODE_PIN0) || test_mode_pin(MODE_PIN1))
+		pll2_mult = 4;
+
+	BUG_ON(!pll2_mult);
+
 	if (idx < ARRAY_SIZE(sh7619_clk_ops))
 		*ops = sh7619_clk_ops[idx];
 }
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
index b26264dc2ae..1174e2d96c0 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c
@@ -22,19 +22,12 @@ static const int pll1rate[]={1,2,3,4,6,8};
 static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
-#if (CONFIG_SH_CLK_MD == 0)
-#define PLL2 (4)
-#elif (CONFIG_SH_CLK_MD == 2)
-#define PLL2 (2)
-#elif (CONFIG_SH_CLK_MD == 3)
-#define PLL2 (1)
-#else
-#error "Illegal Clock Mode!"
-#endif
+static unsigned int pll2_mult;
 
 static void master_clk_init(struct clk *clk)
 {
-	return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+	clk->rate = 10000000 * pll2_mult *
+	       pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7201_master_clk_ops = {
@@ -80,6 +73,13 @@ static struct clk_ops *sh7201_clk_ops[] = {
 
 void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 {
+	if (test_mode_pin(MODE_PIN1 | MODE_PIN0))
+		pll2_mult = 1;
+	else if (test_mode_pin(MODE_PIN1))
+		pll2_mult = 2;
+	else
+		pll2_mult = 4;
+
 	if (idx < ARRAY_SIZE(sh7201_clk_ops))
 		*ops = sh7201_clk_ops[idx];
 }
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
index 7e75d8f7950..95a008e8b73 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c
@@ -25,21 +25,11 @@ static const int pll1rate[]={8,12,16,0};
 static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
-#if (CONFIG_SH_CLK_MD == 0)
-#define PLL2 (1)
-#elif (CONFIG_SH_CLK_MD == 1)
-#define PLL2 (2)
-#elif (CONFIG_SH_CLK_MD == 2)
-#define PLL2 (4)
-#elif (CONFIG_SH_CLK_MD == 3)
-#define PLL2 (4)
-#else
-#error "Illegal Clock Mode!"
-#endif
+static unsigned int pll2_mult;
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * PLL2 ;
+	clk->rate *= pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0003] * pll2_mult;
 }
 
 static struct clk_ops sh7203_master_clk_ops = {
@@ -79,6 +69,13 @@ static struct clk_ops *sh7203_clk_ops[] = {
 
 void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 {
+	if (test_mode_pin(MODE_PIN1))
+		pll2_mult = 4;
+	else if (test_mode_pin(MODE_PIN0))
+		pll2_mult = 2;
+	else
+		pll2_mult = 1;
+
 	if (idx < ARRAY_SIZE(sh7203_clk_ops))
 		*ops = sh7203_clk_ops[idx];
 }
diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
index b27a5e2687a..3c314d7cd6e 100644
--- a/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
+++ b/arch/sh/kernel/cpu/sh2a/clock-sh7206.c
@@ -22,19 +22,11 @@ static const int pll1rate[]={1,2,3,4,6,8};
 static const int pfc_divisors[]={1,2,3,4,6,8,12};
 #define ifc_divisors pfc_divisors
 
-#if (CONFIG_SH_CLK_MD == 2)
-#define PLL2 (4)
-#elif (CONFIG_SH_CLK_MD == 6)
-#define PLL2 (2)
-#elif (CONFIG_SH_CLK_MD == 7)
-#define PLL2 (1)
-#else
-#error "Illigal Clock Mode!"
-#endif
+static unsigned int pll2_mult;
 
 static void master_clk_init(struct clk *clk)
 {
-	clk->rate *= PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
+	clk->rate *= pll2_mult * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007];
 }
 
 static struct clk_ops sh7206_master_clk_ops = {
@@ -79,7 +71,13 @@ static struct clk_ops *sh7206_clk_ops[] = {
 
 void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
 {
+	if (test_mode_pin(MODE_PIN2 | MODE_PIN1 | MODE_PIN0))
+		pll2_mult = 1;
+	else if (test_mode_pin(MODE_PIN2 | MODE_PIN1))
+		pll2_mult = 2;
+	else if (test_mode_pin(MODE_PIN1))
+		pll2_mult = 4;
+
 	if (idx < ARRAY_SIZE(sh7206_clk_ops))
 		*ops = sh7206_clk_ops[idx];
 }
-
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
index 4eabc68cd75..3f6f8e98635 100644
--- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
@@ -81,8 +81,7 @@ static void shoc_clk_init(struct clk *clk)
 	for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
 		int divisor = frqcr3_divisors[i];
 
-		if (clk->ops->set_rate(clk, clk->parent->rate /
-						divisor, 0) == 0)
+		if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
 			break;
 	}
 
@@ -110,7 +109,7 @@ static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static int shoc_clk_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long frqcr3;
 	unsigned int tmp;
diff --git a/arch/sh/kernel/cpu/sh4/perf_event.c b/arch/sh/kernel/cpu/sh4/perf_event.c
index dbf3b4bb71f..748955df018 100644
--- a/arch/sh/kernel/cpu/sh4/perf_event.c
+++ b/arch/sh/kernel/cpu/sh4/perf_event.c
@@ -250,4 +250,4 @@ static int __init sh7750_pmu_init(void)
 
 	return register_sh_pmu(&sh7750_pmu);
 }
-arch_initcall(sh7750_pmu_init);
+early_initcall(sh7750_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
index 71291ae201b..93c646072c1 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 
 /* SH7343 registers */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
index 7ce5bbcd408..049dc0628cc 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 
 /* SH7366 registers */
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 2030f3d9fac..9d23a36f064 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/hwblk.h>
 #include <cpu/sh7722.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
index d3938f0d370..55493cd5bd8 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/hwblk.h>
 #include <cpu/sh7723.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
index 0fe2e9329cb..d08fa953c88 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/hwblk.h>
 #include <cpu/sh7724.h>
@@ -111,12 +111,21 @@ static struct clk div3_clk = {
 	.parent		= &pll_clk,
 };
 
+/* External input clock (pin name: FSIMCKA/FSIMCKB ) */
+struct clk sh7724_fsimcka_clk = {
+};
+
+struct clk sh7724_fsimckb_clk = {
+};
+
 static struct clk *main_clks[] = {
 	&r_clk,
 	&extal_clk,
 	&fll_clk,
 	&pll_clk,
 	&div3_clk,
+	&sh7724_fsimcka_clk,
+	&sh7724_fsimckb_clk,
 };
 
 static void div4_kick(struct clk *clk)
@@ -154,16 +163,38 @@ struct clk div4_clks[DIV4_NR] = {
 	[DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
 };
 
-enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
+enum { DIV6_V, DIV6_I, DIV6_S, DIV6_NR };
 
 static struct clk div6_clks[DIV6_NR] = {
 	[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
-	[DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
-	[DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),
 	[DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0),
 	[DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
 };
 
+enum { DIV6_FA, DIV6_FB, DIV6_REPARENT_NR };
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *fclkacr_parent[] = {
+	[0] = &div3_clk,
+	[1] = NULL,
+	[2] = &sh7724_fsimcka_clk,
+	[3] = NULL,
+};
+
+static struct clk *fclkbcr_parent[] = {
+	[0] = &div3_clk,
+	[1] = NULL,
+	[2] = &sh7724_fsimckb_clk,
+	[3] = NULL,
+};
+
+static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
+	[DIV6_FA] = SH_CLK_DIV6_EXT(&div3_clk, FCLKACR, 0,
+				      fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
+	[DIV6_FB] = SH_CLK_DIV6_EXT(&div3_clk, FCLKBCR, 0,
+				      fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
+};
+
 static struct clk mstp_clks[HWBLK_NR] = {
 	SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
 	SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
@@ -240,8 +271,8 @@ static struct clk_lookup lookups[] = {
 
 	/* DIV6 clocks */
 	CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
-	CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
-	CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
+	CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FA]),
+	CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FB]),
 	CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
 	CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
 
@@ -376,6 +407,9 @@ int __init arch_clk_init(void)
 		ret = sh_clk_div6_register(div6_clks, DIV6_NR);
 
 	if (!ret)
+		ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
+
+	if (!ret)
 		ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR);
 
 	return ret;
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
index ce39a2ae8c6..e073e3eb4c3 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
index 1f1df48008c..599630fc4d3 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 #include <asm/io.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
index 62d70635006..8894926479a 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 #include <asm/io.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index c3e458aaa2b..2d960247f3e 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -14,7 +14,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/cpufreq.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 #include <cpu/sh7785.h>
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
index 597c9fbe49c..42e403be907 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
index 4f70df6b616..1afdb93b8cc 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <asm/clkdev.h>
+#include <linux/clkdev.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
diff --git a/arch/sh/kernel/cpu/sh4a/perf_event.c b/arch/sh/kernel/cpu/sh4a/perf_event.c
index 58027652573..17e6bebfede 100644
--- a/arch/sh/kernel/cpu/sh4a/perf_event.c
+++ b/arch/sh/kernel/cpu/sh4a/perf_event.c
@@ -284,4 +284,4 @@ static int __init sh4a_pmu_init(void)
 
 	return register_sh_pmu(&sh4a_pmu);
 }
-arch_initcall(sh4a_pmu_init);
+early_initcall(sh4a_pmu_init);
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index c016c000471..0170dbda1d0 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -522,10 +522,37 @@ static struct platform_device dma0_device = {
 	},
 };
 
+#define USB_EHCI_START 0xffe70000
+#define USB_OHCI_START 0xffe70400
+
+static struct resource usb_ehci_resources[] = {
+	[0] = {
+		.start	= USB_EHCI_START,
+		.end	= USB_EHCI_START + 0x3ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 77,
+		.end	= 77,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_ehci_device = {
+	.name		= "sh_ehci",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &usb_ehci_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(usb_ehci_resources),
+	.resource	= usb_ehci_resources,
+};
+
 static struct resource usb_ohci_resources[] = {
 	[0] = {
-		.start	= 0xffe70400,
-		.end	= 0xffe704ff,
+		.start	= USB_OHCI_START,
+		.end	= USB_OHCI_START + 0x3ff,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -535,12 +562,11 @@ static struct resource usb_ohci_resources[] = {
 	},
 };
 
-static u64 usb_ohci_dma_mask = DMA_BIT_MASK(32);
 static struct platform_device usb_ohci_device = {
 	.name		= "sh_ohci",
 	.id		= -1,
 	.dev = {
-		.dma_mask		= &usb_ohci_dma_mask,
+		.dma_mask		= &usb_ohci_device.dev.coherent_dma_mask,
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 	.num_resources	= ARRAY_SIZE(usb_ohci_resources),
@@ -570,6 +596,7 @@ static struct platform_device *sh7786_early_devices[] __initdata = {
 
 static struct platform_device *sh7786_devices[] __initdata = {
 	&dma0_device,
+	&usb_ehci_device,
 	&usb_ohci_device,
 };
 
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
deleted file mode 100644
index 447d78f666f..00000000000
--- a/arch/sh/kernel/io_generic.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * arch/sh/kernel/io_generic.c
- *
- * Copyright (C) 2000  Niibe Yutaka
- * Copyright (C) 2005 - 2007 Paul Mundt
- *
- * Generic I/O routine. These can be used where a machine specific version
- * is not required.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/module.h>
-#include <linux/io.h>
-#include <asm/machvec.h>
-
-#ifdef CONFIG_CPU_SH3
-/* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a
- * workaround. */
-/* I'm not sure SH7709 has this kind of bug */
-#define dummy_read()	__raw_readb(0xba000000)
-#else
-#define dummy_read()
-#endif
-
-unsigned long generic_io_base = 0;
-
-u8 generic_inb(unsigned long port)
-{
-	return __raw_readb(__ioport_map(port, 1));
-}
-
-u16 generic_inw(unsigned long port)
-{
-	return __raw_readw(__ioport_map(port, 2));
-}
-
-u32 generic_inl(unsigned long port)
-{
-	return __raw_readl(__ioport_map(port, 4));
-}
-
-u8 generic_inb_p(unsigned long port)
-{
-	unsigned long v = generic_inb(port);
-
-	ctrl_delay();
-	return v;
-}
-
-u16 generic_inw_p(unsigned long port)
-{
-	unsigned long v = generic_inw(port);
-
-	ctrl_delay();
-	return v;
-}
-
-u32 generic_inl_p(unsigned long port)
-{
-	unsigned long v = generic_inl(port);
-
-	ctrl_delay();
-	return v;
-}
-
-/*
- * insb/w/l all read a series of bytes/words/longs from a fixed port
- * address. However as the port address doesn't change we only need to
- * convert the port address to real address once.
- */
-
-void generic_insb(unsigned long port, void *dst, unsigned long count)
-{
-	__raw_readsb(__ioport_map(port, 1), dst, count);
-	dummy_read();
-}
-
-void generic_insw(unsigned long port, void *dst, unsigned long count)
-{
-	__raw_readsw(__ioport_map(port, 2), dst, count);
-	dummy_read();
-}
-
-void generic_insl(unsigned long port, void *dst, unsigned long count)
-{
-	__raw_readsl(__ioport_map(port, 4), dst, count);
-	dummy_read();
-}
-
-void generic_outb(u8 b, unsigned long port)
-{
-	__raw_writeb(b, __ioport_map(port, 1));
-}
-
-void generic_outw(u16 b, unsigned long port)
-{
-	__raw_writew(b, __ioport_map(port, 2));
-}
-
-void generic_outl(u32 b, unsigned long port)
-{
-	__raw_writel(b, __ioport_map(port, 4));
-}
-
-void generic_outb_p(u8 b, unsigned long port)
-{
-	generic_outb(b, port);
-	ctrl_delay();
-}
-
-void generic_outw_p(u16 b, unsigned long port)
-{
-	generic_outw(b, port);
-	ctrl_delay();
-}
-
-void generic_outl_p(u32 b, unsigned long port)
-{
-	generic_outl(b, port);
-	ctrl_delay();
-}
-
-/*
- * outsb/w/l all write a series of bytes/words/longs to a fixed port
- * address. However as the port address doesn't change we only need to
- * convert the port address to real address once.
- */
-void generic_outsb(unsigned long port, const void *src, unsigned long count)
-{
-	__raw_writesb(__ioport_map(port, 1), src, count);
-	dummy_read();
-}
-
-void generic_outsw(unsigned long port, const void *src, unsigned long count)
-{
-	__raw_writesw(__ioport_map(port, 2), src, count);
-	dummy_read();
-}
-
-void generic_outsl(unsigned long port, const void *src, unsigned long count)
-{
-	__raw_writesl(__ioport_map(port, 4), src, count);
-	dummy_read();
-}
-
-void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
-{
-#ifdef P1SEG
-	if (PXSEG(addr) >= P1SEG)
-		return (void __iomem *)addr;
-#endif
-
-	return (void __iomem *)(addr + generic_io_base);
-}
-
-void generic_ioport_unmap(void __iomem *addr)
-{
-}
-
-#ifndef CONFIG_GENERIC_IOMAP
-void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	void __iomem *ret;
-
-	ret = __ioport_map_trapped(port, nr);
-	if (ret)
-		return ret;
-
-	return __ioport_map(port, nr);
-}
-EXPORT_SYMBOL(ioport_map);
-
-void ioport_unmap(void __iomem *addr)
-{
-	sh_mv.mv_ioport_unmap(addr);
-}
-EXPORT_SYMBOL(ioport_unmap);
-#endif /* CONFIG_GENERIC_IOMAP */
diff --git a/arch/sh/kernel/iomap.c b/arch/sh/kernel/iomap.c
new file mode 100644
index 00000000000..2e8e8b9b9ce
--- /dev/null
+++ b/arch/sh/kernel/iomap.c
@@ -0,0 +1,165 @@
+/*
+ * arch/sh/kernel/iomap.c
+ *
+ * Copyright (C) 2000  Niibe Yutaka
+ * Copyright (C) 2005 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+
+unsigned int ioread8(void __iomem *addr)
+{
+	return readb(addr);
+}
+EXPORT_SYMBOL(ioread8);
+
+unsigned int ioread16(void __iomem *addr)
+{
+	return readw(addr);
+}
+EXPORT_SYMBOL(ioread16);
+
+unsigned int ioread16be(void __iomem *addr)
+{
+	return be16_to_cpu(__raw_readw(addr));
+}
+EXPORT_SYMBOL(ioread16be);
+
+unsigned int ioread32(void __iomem *addr)
+{
+	return readl(addr);
+}
+EXPORT_SYMBOL(ioread32);
+
+unsigned int ioread32be(void __iomem *addr)
+{
+	return be32_to_cpu(__raw_readl(addr));
+}
+EXPORT_SYMBOL(ioread32be);
+
+void iowrite8(u8 val, void __iomem *addr)
+{
+	writeb(val, addr);
+}
+EXPORT_SYMBOL(iowrite8);
+
+void iowrite16(u16 val, void __iomem *addr)
+{
+	writew(val, addr);
+}
+EXPORT_SYMBOL(iowrite16);
+
+void iowrite16be(u16 val, void __iomem *addr)
+{
+	__raw_writew(cpu_to_be16(val), addr);
+}
+EXPORT_SYMBOL(iowrite16be);
+
+void iowrite32(u32 val, void __iomem *addr)
+{
+	writel(val, addr);
+}
+EXPORT_SYMBOL(iowrite32);
+
+void iowrite32be(u32 val, void __iomem *addr)
+{
+	__raw_writel(cpu_to_be32(val), addr);
+}
+EXPORT_SYMBOL(iowrite32be);
+
+/*
+ * These are the "repeat MMIO read/write" functions.
+ * Note the "__raw" accesses, since we don't want to
+ * convert to CPU byte order. We write in "IO byte
+ * order" (we also don't have IO barriers).
+ */
+static inline void mmio_insb(void __iomem *addr, u8 *dst, int count)
+{
+	while (--count >= 0) {
+		u8 data = __raw_readb(addr);
+		*dst = data;
+		dst++;
+	}
+}
+
+static inline void mmio_insw(void __iomem *addr, u16 *dst, int count)
+{
+	while (--count >= 0) {
+		u16 data = __raw_readw(addr);
+		*dst = data;
+		dst++;
+	}
+}
+
+static inline void mmio_insl(void __iomem *addr, u32 *dst, int count)
+{
+	while (--count >= 0) {
+		u32 data = __raw_readl(addr);
+		*dst = data;
+		dst++;
+	}
+}
+
+static inline void mmio_outsb(void __iomem *addr, const u8 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writeb(*src, addr);
+		src++;
+	}
+}
+
+static inline void mmio_outsw(void __iomem *addr, const u16 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writew(*src, addr);
+		src++;
+	}
+}
+
+static inline void mmio_outsl(void __iomem *addr, const u32 *src, int count)
+{
+	while (--count >= 0) {
+		__raw_writel(*src, addr);
+		src++;
+	}
+}
+
+void ioread8_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insb(addr, dst, count);
+}
+EXPORT_SYMBOL(ioread8_rep);
+
+void ioread16_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insw(addr, dst, count);
+}
+EXPORT_SYMBOL(ioread16_rep);
+
+void ioread32_rep(void __iomem *addr, void *dst, unsigned long count)
+{
+	mmio_insl(addr, dst, count);
+}
+EXPORT_SYMBOL(ioread32_rep);
+
+void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsb(addr, src, count);
+}
+EXPORT_SYMBOL(iowrite8_rep);
+
+void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsw(addr, src, count);
+}
+EXPORT_SYMBOL(iowrite16_rep);
+
+void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count)
+{
+	mmio_outsl(addr, src, count);
+}
+EXPORT_SYMBOL(iowrite32_rep);
diff --git a/arch/sh/kernel/ioport.c b/arch/sh/kernel/ioport.c
new file mode 100644
index 00000000000..e3ad6103e7c
--- /dev/null
+++ b/arch/sh/kernel/ioport.c
@@ -0,0 +1,43 @@
+/*
+ * arch/sh/kernel/ioport.c
+ *
+ * Copyright (C) 2000  Niibe Yutaka
+ * Copyright (C) 2005 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+
+const unsigned long sh_io_port_base __read_mostly = -1;
+EXPORT_SYMBOL(sh_io_port_base);
+
+void __iomem *__ioport_map(unsigned long addr, unsigned int size)
+{
+	if (sh_mv.mv_ioport_map)
+		return sh_mv.mv_ioport_map(addr, size);
+
+	return (void __iomem *)(addr + sh_io_port_base);
+}
+EXPORT_SYMBOL(__ioport_map);
+
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	void __iomem *ret;
+
+	ret = __ioport_map_trapped(port, nr);
+	if (ret)
+		return ret;
+
+	return __ioport_map(port, nr);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+	if (sh_mv.mv_ioport_unmap)
+		sh_mv.mv_ioport_unmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
diff --git a/arch/sh/kernel/machvec.c b/arch/sh/kernel/machvec.c
index 9f9bb63616a..3d722e49db0 100644
--- a/arch/sh/kernel/machvec.c
+++ b/arch/sh/kernel/machvec.c
@@ -118,28 +118,6 @@ void __init sh_mv_setup(void)
 		sh_mv.mv_##elem = generic_##elem; \
 } while (0)
 
-#ifdef CONFIG_HAS_IOPORT
-
-#ifdef P2SEG
-	__set_io_port_base(P2SEG);
-#else
-	__set_io_port_base(0);
-#endif
-
-	mv_set(inb);	mv_set(inw);	mv_set(inl);
-	mv_set(outb);	mv_set(outw);	mv_set(outl);
-
-	mv_set(inb_p);	mv_set(inw_p);	mv_set(inl_p);
-	mv_set(outb_p);	mv_set(outw_p);	mv_set(outl_p);
-
-	mv_set(insb);	mv_set(insw);	mv_set(insl);
-	mv_set(outsb);	mv_set(outsw);	mv_set(outsl);
-
-	mv_set(ioport_map);
-	mv_set(ioport_unmap);
-
-#endif
-
 	mv_set(irq_demux);
 	mv_set(mode_pins);
 	mv_set(mem_init);
diff --git a/arch/sh/kernel/perf_event.c b/arch/sh/kernel/perf_event.c
index 5a4b3343565..2ee21a47b5a 100644
--- a/arch/sh/kernel/perf_event.c
+++ b/arch/sh/kernel/perf_event.c
@@ -389,7 +389,7 @@ int __cpuinit register_sh_pmu(struct sh_pmu *_pmu)
 
 	WARN_ON(_pmu->num_events > MAX_HWEVENTS);
 
-	perf_pmu_register(&pmu);
+	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
 	perf_cpu_notifier(sh_pmu_notifier);
 	return 0;
 }
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index d6b018c7ebd..4f267160c51 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -12,7 +12,6 @@
 #include <linux/initrd.h>
 #include <linux/bootmem.h>
 #include <linux/console.h>
-#include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/utsname.h>
 #include <linux/nodemask.h>
@@ -319,146 +318,3 @@ int test_mode_pin(int pin)
 {
 	return sh_mv.mv_mode_pins() & pin;
 }
-
-static const char *cpu_name[] = {
-	[CPU_SH7201]	= "SH7201",
-	[CPU_SH7203]	= "SH7203",	[CPU_SH7263]	= "SH7263",
-	[CPU_SH7206]	= "SH7206",	[CPU_SH7619]	= "SH7619",
-	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
-	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
-	[CPU_SH7709]	= "SH7709",	[CPU_SH7710]	= "SH7710",
-	[CPU_SH7712]	= "SH7712",	[CPU_SH7720]	= "SH7720",
-	[CPU_SH7721]	= "SH7721",	[CPU_SH7729]	= "SH7729",
-	[CPU_SH7750]	= "SH7750",	[CPU_SH7750S]	= "SH7750S",
-	[CPU_SH7750R]	= "SH7750R",	[CPU_SH7751]	= "SH7751",
-	[CPU_SH7751R]	= "SH7751R",	[CPU_SH7760]	= "SH7760",
-	[CPU_SH4_202]	= "SH4-202",	[CPU_SH4_501]	= "SH4-501",
-	[CPU_SH7763]	= "SH7763",	[CPU_SH7770]	= "SH7770",
-	[CPU_SH7780]	= "SH7780",	[CPU_SH7781]	= "SH7781",
-	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
-	[CPU_SH7786]	= "SH7786",	[CPU_SH7757]	= "SH7757",
-	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
-	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
-	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
-	[CPU_SH7366]	= "SH7366",	[CPU_SH7724]	= "SH7724",
-	[CPU_SH_NONE]	= "Unknown"
-};
-
-const char *get_cpu_subtype(struct sh_cpuinfo *c)
-{
-	return cpu_name[c->type];
-}
-EXPORT_SYMBOL(get_cpu_subtype);
-
-#ifdef CONFIG_PROC_FS
-/* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
-static const char *cpu_flags[] = {
-	"none", "fpu", "p2flush", "mmuassoc", "dsp", "perfctr",
-	"ptea", "llsc", "l2", "op32", "pteaex", NULL
-};
-
-static void show_cpuflags(struct seq_file *m, struct sh_cpuinfo *c)
-{
-	unsigned long i;
-
-	seq_printf(m, "cpu flags\t:");
-
-	if (!c->flags) {
-		seq_printf(m, " %s\n", cpu_flags[0]);
-		return;
-	}
-
-	for (i = 0; cpu_flags[i]; i++)
-		if ((c->flags & (1 << i)))
-			seq_printf(m, " %s", cpu_flags[i+1]);
-
-	seq_printf(m, "\n");
-}
-
-static void show_cacheinfo(struct seq_file *m, const char *type,
-			   struct cache_info info)
-{
-	unsigned int cache_size;
-
-	cache_size = info.ways * info.sets * info.linesz;
-
-	seq_printf(m, "%s size\t: %2dKiB (%d-way)\n",
-		   type, cache_size >> 10, info.ways);
-}
-
-/*
- *	Get CPU information for use by the procfs.
- */
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-	struct sh_cpuinfo *c = v;
-	unsigned int cpu = c - cpu_data;
-
-	if (!cpu_online(cpu))
-		return 0;
-
-	if (cpu == 0)
-		seq_printf(m, "machine\t\t: %s\n", get_system_type());
-	else
-		seq_printf(m, "\n");
-
-	seq_printf(m, "processor\t: %d\n", cpu);
-	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
-	seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
-	if (c->cut_major == -1)
-		seq_printf(m, "cut\t\t: unknown\n");
-	else if (c->cut_minor == -1)
-		seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
-	else
-		seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
-
-	show_cpuflags(m, c);
-
-	seq_printf(m, "cache type\t: ");
-
-	/*
-	 * Check for what type of cache we have, we support both the
-	 * unified cache on the SH-2 and SH-3, as well as the harvard
-	 * style cache on the SH-4.
-	 */
-	if (c->icache.flags & SH_CACHE_COMBINED) {
-		seq_printf(m, "unified\n");
-		show_cacheinfo(m, "cache", c->icache);
-	} else {
-		seq_printf(m, "split (harvard)\n");
-		show_cacheinfo(m, "icache", c->icache);
-		show_cacheinfo(m, "dcache", c->dcache);
-	}
-
-	/* Optional secondary cache */
-	if (c->flags & CPU_HAS_L2_CACHE)
-		show_cacheinfo(m, "scache", c->scache);
-
-	seq_printf(m, "address sizes\t: %u bits physical\n", c->phys_bits);
-
-	seq_printf(m, "bogomips\t: %lu.%02lu\n",
-		     c->loops_per_jiffy/(500000/HZ),
-		     (c->loops_per_jiffy/(5000/HZ)) % 100);
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? cpu_data + *pos : NULL;
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-const struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= show_cpuinfo,
-};
-#endif /* CONFIG_PROC_FS */
diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 81f58371613..8c6a350df75 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -88,7 +88,7 @@ asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len, int op)
 	}
 
 	if (op & CACHEFLUSH_I)
-		flush_cache_all();
+		flush_icache_range(addr, addr+len);
 
 	up_read(&current->mm->mmap_sem);
 	return 0;
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index e872e81add8..6fc347ebe59 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -375,3 +375,4 @@ ENTRY(sys_call_table)
 	.long sys_sendmsg		/* 355 */
 	.long sys_recvmsg
 	.long sys_recvmmsg
+	.long sys_accept4
diff --git a/arch/sh/kernel/vsyscall/vsyscall-trapa.S b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
index 3b6eb34c43f..3e70f851cdc 100644
--- a/arch/sh/kernel/vsyscall/vsyscall-trapa.S
+++ b/arch/sh/kernel/vsyscall/vsyscall-trapa.S
@@ -8,9 +8,9 @@ __kernel_vsyscall:
 	 * fill out .eh_frame -- PFM. */
 .LEND_vsyscall:
 	.size __kernel_vsyscall,.-.LSTART_vsyscall
-	.previous
 
 	.section .eh_frame,"a",@progbits
+	.previous
 .LCIE:
 	.ualong	.LCIE_end - .LCIE_start
 .LCIE_start:
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 2cfae81914a..92eb98633ab 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -114,7 +114,7 @@ static void sh4_flush_dcache_page(void *arg)
 	struct address_space *mapping = page_mapping(page);
 
 	if (mapping && !mapping_mapped(mapping))
-		set_bit(PG_dcache_dirty, &page->flags);
+		clear_bit(PG_dcache_clean, &page->flags);
 	else
 #endif
 		flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
@@ -239,7 +239,7 @@ static void sh4_flush_cache_page(void *args)
 		 * another ASID than the current one.
 		 */
 		map_coherent = (current_cpu_data.dcache.n_aliases &&
-			!test_bit(PG_dcache_dirty, &page->flags) &&
+			test_bit(PG_dcache_clean, &page->flags) &&
 			page_mapped(page));
 		if (map_coherent)
 			vaddr = kmap_coherent(page, address);
diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c
index f498da1cce7..7729cca727e 100644
--- a/arch/sh/mm/cache-sh7705.c
+++ b/arch/sh/mm/cache-sh7705.c
@@ -139,7 +139,7 @@ static void sh7705_flush_dcache_page(void *arg)
 	struct address_space *mapping = page_mapping(page);
 
 	if (mapping && !mapping_mapped(mapping))
-		set_bit(PG_dcache_dirty, &page->flags);
+		clear_bit(PG_dcache_clean, &page->flags);
 	else
 		__flush_dcache_page(__pa(page_address(page)));
 }
diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c
index ba401d137bb..88d3dc3d30d 100644
--- a/arch/sh/mm/cache.c
+++ b/arch/sh/mm/cache.c
@@ -60,14 +60,14 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
 		       unsigned long len)
 {
 	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
-	    !test_bit(PG_dcache_dirty, &page->flags)) {
+	    test_bit(PG_dcache_clean, &page->flags)) {
 		void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(vto, src, len);
 		kunmap_coherent(vto);
 	} else {
 		memcpy(dst, src, len);
 		if (boot_cpu_data.dcache.n_aliases)
-			set_bit(PG_dcache_dirty, &page->flags);
+			clear_bit(PG_dcache_clean, &page->flags);
 	}
 
 	if (vma->vm_flags & VM_EXEC)
@@ -79,14 +79,14 @@ void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
 			 unsigned long len)
 {
 	if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
-	    !test_bit(PG_dcache_dirty, &page->flags)) {
+	    test_bit(PG_dcache_clean, &page->flags)) {
 		void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
 		memcpy(dst, vfrom, len);
 		kunmap_coherent(vfrom);
 	} else {
 		memcpy(dst, src, len);
 		if (boot_cpu_data.dcache.n_aliases)
-			set_bit(PG_dcache_dirty, &page->flags);
+			clear_bit(PG_dcache_clean, &page->flags);
 	}
 }
 
@@ -98,7 +98,7 @@ void copy_user_highpage(struct page *to, struct page *from,
 	vto = kmap_atomic(to, KM_USER1);
 
 	if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
-	    !test_bit(PG_dcache_dirty, &from->flags)) {
+	    test_bit(PG_dcache_clean, &from->flags)) {
 		vfrom = kmap_coherent(from, vaddr);
 		copy_page(vto, vfrom);
 		kunmap_coherent(vfrom);
@@ -141,7 +141,7 @@ void __update_cache(struct vm_area_struct *vma,
 
 	page = pfn_to_page(pfn);
 	if (pfn_valid(pfn)) {
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+		int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags);
 		if (dirty)
 			__flush_purge_region(page_address(page), PAGE_SIZE);
 	}
@@ -153,7 +153,7 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr)
 
 	if (pages_do_alias(addr, vmaddr)) {
 		if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
-		    !test_bit(PG_dcache_dirty, &page->flags)) {
+		    test_bit(PG_dcache_clean, &page->flags)) {
 			void *kaddr;
 
 			kaddr = kmap_coherent(page, vmaddr);
diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c
index 15d74ea4209..ec29e14ec5a 100644
--- a/arch/sh/mm/kmap.c
+++ b/arch/sh/mm/kmap.c
@@ -34,7 +34,7 @@ void *kmap_coherent(struct page *page, unsigned long addr)
 	enum fixed_addresses idx;
 	unsigned long vaddr;
 
-	BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
+	BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
 
 	pagefault_disable();
 
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 97e3feb9ff1..a2c5898c1ab 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -6,25 +6,24 @@
 ROOT_IMG	:= /usr/src/root.img
 ELFTOAOUT	:= elftoaout
 
-hostprogs-y	:= piggyback_32 piggyback_64 btfixupprep
+hostprogs-y	:= piggyback btfixupprep
 targets		:= tftpboot.img btfix.o btfix.S image zImage vmlinux.aout
 clean-files	:= System.map
 
 quiet_cmd_elftoaout	= ELFTOAOUT $@
       cmd_elftoaout	= $(ELFTOAOUT) $(obj)/image -o $@
+quiet_cmd_piggy		= PIGGY   $@
+      cmd_piggy		= $(obj)/piggyback $(BITS) $@ System.map $(ROOT_IMG)
+quiet_cmd_strip		= STRIP   $@
+      cmd_strip		= $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $< -o $@
 
 ifeq ($(CONFIG_SPARC32),y)
-quiet_cmd_piggy		= PIGGY   $@
-      cmd_piggy		= $(obj)/piggyback_32 $@ System.map $(ROOT_IMG)
 quiet_cmd_btfix		= BTFIX   $@
       cmd_btfix		= $(OBJDUMP) -x vmlinux | $(obj)/btfixupprep > $@
 quiet_cmd_sysmap        = SYSMAP  $(obj)/System.map
       cmd_sysmap        = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
 quiet_cmd_image = LD      $@
       cmd_image = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDFLAGS_$(@F)) -o $@
-quiet_cmd_strip = STRIP   $@
-      cmd_strip = $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $(obj)/image -o $@
-
 
 define rule_image
 	$(if $($(quiet)cmd_image),               \
@@ -57,10 +56,7 @@ $(obj)/image: $(obj)/btfix.o FORCE
 
 $(obj)/zImage: $(obj)/image
 	$(call if_changed,strip)
-
-$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_32 System.map $(ROOT_IMG) FORCE
-	$(call if_changed,elftoaout)
-	$(call if_changed,piggy)
+	@echo '  kernel: $@ is ready'
 
 $(obj)/btfix.S: $(obj)/btfixupprep vmlinux FORCE
 	$(call if_changed,btfix)
@@ -68,11 +64,6 @@ $(obj)/btfix.S: $(obj)/btfixupprep vmlinux FORCE
 endif
 
 ifeq ($(CONFIG_SPARC64),y)
-quiet_cmd_piggy     = PIGGY   $@
-      cmd_piggy     = $(obj)/piggyback_64 $@ System.map $(ROOT_IMG)
-quiet_cmd_strip     = STRIP   $@
-      cmd_strip     = $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start vmlinux -o $@
-
 
 # Actual linking
 $(obj)/image: vmlinux FORCE
@@ -81,10 +72,6 @@ $(obj)/image: vmlinux FORCE
 
 $(obj)/zImage: $(obj)/image
 	$(call if_changed,gzip)
-
-$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback_64 System.map $(ROOT_IMG) FORCE
-	$(call if_changed,elftoaout)
-	$(call if_changed,piggy)
 	@echo '  kernel: $@ is ready'
 
 $(obj)/vmlinux.aout: vmlinux FORCE
@@ -92,3 +79,6 @@ $(obj)/vmlinux.aout: vmlinux FORCE
 	@echo '  kernel: $@ is ready'
 endif
 
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback System.map $(ROOT_IMG) FORCE
+	$(call if_changed,elftoaout)
+	$(call if_changed,piggy)
diff --git a/arch/sparc/boot/piggyback.c b/arch/sparc/boot/piggyback.c
new file mode 100644
index 00000000000..c0a798fcf03
--- /dev/null
+++ b/arch/sparc/boot/piggyback.c
@@ -0,0 +1,272 @@
+/*
+   Simple utility to make a single-image install kernel with initial ramdisk
+   for Sparc tftpbooting without need to set up nfs.
+
+   Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+   Pete Zaitcev <zaitcev@yahoo.com> endian fixes for cross-compiles, 2000.
+   Copyright (C) 2011 Sam Ravnborg <sam@ravnborg.org>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#include <dirent.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <stdio.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+
+/*
+ * Note: run this on an a.out kernel (use elftoaout for it),
+ * as PROM looks for a.out image only.
+ */
+
+#define AOUT_TEXT_OFFSET   32
+
+static int is64bit = 0;
+
+/* align to power-of-two size */
+static int align(int n)
+{
+	if (is64bit)
+		return (n + 0x1fff) & ~0x1fff;
+	else
+		return (n + 0xfff) & ~0xfff;
+}
+
+/* read two bytes as big endian */
+static unsigned short ld2(char *p)
+{
+	return (p[0] << 8) | p[1];
+}
+
+/* save 4 bytes as big endian */
+static void st4(char *p, unsigned int x)
+{
+	p[0] = x >> 24;
+	p[1] = x >> 16;
+	p[2] = x >> 8;
+	p[3] = x;
+}
+
+static void die(const char *str)
+{
+	perror(str);
+	exit(1);
+}
+
+static void usage(void)
+{
+	/* fs_img.gz is an image of initial ramdisk. */
+	fprintf(stderr, "Usage: piggyback bits vmlinux.aout System.map fs_img.gz\n");
+	fprintf(stderr, "\tKernel image will be modified in place.\n");
+	exit(1);
+}
+
+static int start_line(const char *line)
+{
+	if (strcmp(line + 8, " T _start\n") == 0)
+		return 1;
+	else if (strcmp(line + 16, " T _start\n") == 0)
+		return 1;
+	return 0;
+}
+
+static int end_line(const char *line)
+{
+	if (strcmp(line + 8, " A _end\n") == 0)
+		return 1;
+	else if (strcmp (line + 16, " A _end\n") == 0)
+		return 1;
+	return 0;
+}
+
+/*
+ * Find address for start and end in System.map.
+ * The file looks like this:
+ * f0004000 T _start
+ * f0379f79 A _end
+ * 1234567890123456
+ * ^coloumn 1
+ * There is support for 64 bit addresses too.
+ *
+ * Return 0 if either start or end is not found
+ */
+static int get_start_end(const char *filename, unsigned int *start,
+                                               unsigned int *end)
+{
+	FILE *map;
+	char buffer[1024];
+
+	*start = 0;
+	*end = 0;
+	map = fopen(filename, "r");
+	if (!map)
+		die(filename);
+	while (fgets(buffer, 1024, map)) {
+		if (start_line(buffer))
+			*start = strtoul(buffer, NULL, 16);
+		else if (end_line(buffer))
+			*end = strtoul(buffer, NULL, 16);
+	}
+	fclose (map);
+
+	if (*start == 0 || *end == 0)
+		return 0;
+
+	return 1;
+}
+
+#define LOOKBACK (128 * 4)
+#define BUFSIZE 1024
+/*
+ * Find the HdrS entry from head_32/head_64.
+ * We check if it is at the beginning of the file (sparc64 case)
+ * and if not we search for it.
+ * When we search do so in steps of 4 as HdrS is on a 4-byte aligned
+ * address (it is on same alignment as sparc instructions)
+ * Return the offset to the HdrS entry (as off_t)
+ */
+static off_t get_hdrs_offset(int kernelfd, const char *filename)
+{
+	char buffer[BUFSIZE];
+	off_t offset;
+	int i;
+
+	if (lseek(kernelfd, 0, SEEK_SET) < 0)
+		die("lseek");
+	if (read(kernelfd, buffer, BUFSIZE) != BUFSIZE)
+		die(filename);
+
+	if (buffer[40] == 'H' && buffer[41] == 'd' &&
+	    buffer[42] == 'r' && buffer[43] == 'S') {
+		return 40;
+	} else {
+		/*  Find the gokernel label */
+		/* Decode offset from branch instruction */
+		offset = ld2(buffer + AOUT_TEXT_OFFSET + 2) << 2;
+		/* Go back 512 bytes so we do not miss HdrS */
+		offset -= LOOKBACK;
+		/* skip a.out header */
+		offset += AOUT_TEXT_OFFSET;
+		if (lseek(kernelfd, offset, SEEK_SET) < 0)
+			die("lseek");
+		if (read(kernelfd, buffer, BUFSIZE) != BUFSIZE)
+			die(filename);
+
+		for (i = 0; i < LOOKBACK; i += 4) {
+			if (buffer[i + 0] == 'H' && buffer[i + 1] == 'd' &&
+			    buffer[i + 2] == 'r' && buffer[i + 3] == 'S') {
+				return offset + i;
+			}
+		}
+	}
+	fprintf (stderr, "Couldn't find headers signature in %s\n", filename);
+	exit(1);
+}
+
+int main(int argc,char **argv)
+{
+	static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 };
+	char buffer[1024];
+	unsigned int i, start, end;
+	off_t offset;
+	struct stat s;
+	int image, tail;
+
+	if (argc != 5)
+		usage();
+	if (strcmp(argv[1], "64") == 0)
+		is64bit = 1;
+	if (stat (argv[4], &s) < 0)
+		die(argv[4]);
+
+	if (!get_start_end(argv[3], &start, &end)) {
+		fprintf(stderr, "Could not determine start and end from %s\n",
+		        argv[3]);
+		exit(1);
+	}
+	if ((image = open(argv[2], O_RDWR)) < 0)
+		die(argv[2]);
+	if (read(image, buffer, 512) != 512)
+		die(argv[2]);
+	if (memcmp(buffer, aout_magic, 4) != 0) {
+		fprintf (stderr, "Not a.out. Don't blame me.\n");
+		exit(1);
+	}
+	/*
+	 * We need to fill in values for
+	 * sparc_ramdisk_image + sparc_ramdisk_size
+	 * To locate these symbols search for the "HdrS" text which appear
+	 * in the image a little before the gokernel symbol.
+	 * See definition of these in init_32.S
+	 */
+
+	offset = get_hdrs_offset(image, argv[2]);
+	/* skip HdrS + LINUX_VERSION_CODE + HdrS version */
+	offset += 10;
+
+	if (lseek(image, offset, 0) < 0)
+		die("lseek");
+
+	/*
+	 * root_flags = 0
+	 * root_dev = 1 (RAMDISK_MAJOR)
+	 * ram_flags = 0
+	 * sparc_ramdisk_image = "PAGE aligned address after _end")
+	 * sparc_ramdisk_size = size of image
+	 */
+	st4(buffer, 0);
+	st4(buffer + 4, 0x01000000);
+	st4(buffer + 8, align(end + 32));
+	st4(buffer + 12, s.st_size);
+
+	if (write(image, buffer + 2, 14) != 14)
+		die(argv[2]);
+
+	/* For sparc64 update a_text and clear a_data + a_bss */
+	if (is64bit)
+	{
+		if (lseek(image, 4, 0) < 0)
+			die("lseek");
+		/* a_text */
+		st4(buffer, align(end + 32 + 8191) - (start & ~0x3fffffUL) +
+		            s.st_size);
+		/* a_data */
+		st4(buffer + 4, 0);
+		/* a_bss */
+		st4(buffer + 8, 0);
+		if (write(image, buffer, 12) != 12)
+			die(argv[2]);
+	}
+
+	/* seek page aligned boundary in the image file and add boot image */
+	if (lseek(image, AOUT_TEXT_OFFSET - start + align(end + 32), 0) < 0)
+		die("lseek");
+	if ((tail = open(argv[4], O_RDONLY)) < 0)
+		die(argv[4]);
+	while ((i = read(tail, buffer, 1024)) > 0)
+		if (write(image, buffer, i) != i)
+			die(argv[2]);
+	if (close(image) < 0)
+		die("close");
+	if (close(tail) < 0)
+		die("close");
+	return 0;
+}
diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c
deleted file mode 100644
index ac944aec730..00000000000
--- a/arch/sparc/boot/piggyback_32.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
-   Simple utility to make a single-image install kernel with initial ramdisk
-   for Sparc tftpbooting without need to set up nfs.
-
-   Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
-   Pete Zaitcev <zaitcev@yahoo.com> endian fixes for cross-compiles, 2000.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-   
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <dirent.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-/*
- * Note: run this on an a.out kernel (use elftoaout for it),
- * as PROM looks for a.out image only.
- */
-
-static unsigned short ld2(char *p)
-{
-	return (p[0] << 8) | p[1];
-}
-
-static unsigned int ld4(char *p)
-{
-	return (p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3];
-}
-
-static void st4(char *p, unsigned int x)
-{
-	p[0] = x >> 24;
-	p[1] = x >> 16;
-	p[2] = x >> 8;
-	p[3] = x;
-}
-
-static void usage(void)
-{
-	/* fs_img.gz is an image of initial ramdisk. */
-	fprintf(stderr, "Usage: piggyback vmlinux.aout System.map fs_img.gz\n");
-	fprintf(stderr, "\tKernel image will be modified in place.\n");
-	exit(1);
-}
-
-static void die(char *str)
-{
-	perror (str);
-	exit(1);
-}
-
-int main(int argc,char **argv)
-{
-	static char aout_magic[] = { 0x01, 0x03, 0x01, 0x07 };
-	char buffer[1024], *q, *r;
-	unsigned int i, j, k, start, end, offset;
-	FILE *map;
-	struct stat s;
-	int image, tail;
-
-	if (argc != 4) usage();
-	start = end = 0;
-	if (stat (argv[3], &s) < 0) die (argv[3]);
-	map = fopen (argv[2], "r");
-	if (!map) die(argv[2]);
-	while (fgets (buffer, 1024, map)) {
-		if (!strcmp (buffer + 8, " T start\n") || !strcmp (buffer + 16, " T start\n"))
-			start = strtoul (buffer, NULL, 16);
-		else if (!strcmp (buffer + 8, " A _end\n") || !strcmp (buffer + 16, " A _end\n"))
-			end = strtoul (buffer, NULL, 16);
-	}
-	fclose (map);
-	if (!start || !end) {
-		fprintf (stderr, "Could not determine start and end from System.map\n");
-		exit(1);
-	}
-	if ((image = open(argv[1],O_RDWR)) < 0) die(argv[1]);
-	if (read(image,buffer,512) != 512) die(argv[1]);
-	if (memcmp (buffer, "\177ELF", 4) == 0) {
-		q = buffer + ld4(buffer + 28);
-		i = ld4(q + 4) + ld4(buffer + 24) - ld4(q + 8);
-		if (lseek(image,i,0) < 0) die("lseek");
-		if (read(image,buffer,512) != 512) die(argv[1]);
-		j = 0;
-	} else if (memcmp(buffer, aout_magic, 4) == 0) {
-		i = j = 32;
-	} else {
-		fprintf (stderr, "Not ELF nor a.out. Don't blame me.\n");
-		exit(1);
-	}
-	k = i;
-	i += (ld2(buffer + j + 2)<<2) - 512;
-	if (lseek(image,i,0) < 0) die("lseek");
-	if (read(image,buffer,1024) != 1024) die(argv[1]);
-	for (q = buffer, r = q + 512; q < r; q += 4) {
-		if (*q == 'H' && q[1] == 'd' && q[2] == 'r' && q[3] == 'S')
-			break;
-	}
-	if (q == r) {
-		fprintf (stderr, "Couldn't find headers signature in the kernel.\n");
-		exit(1);
-	}
-	offset = i + (q - buffer) + 10;
-	if (lseek(image, offset, 0) < 0) die ("lseek");
-
-	st4(buffer, 0);
-	st4(buffer + 4, 0x01000000);
-	st4(buffer + 8, (end + 32 + 4095) & ~4095);
-	st4(buffer + 12, s.st_size);
-
-	if (write(image,buffer+2,14) != 14) die (argv[1]);
-	if (lseek(image, k - start + ((end + 32 + 4095) & ~4095), 0) < 0) die ("lseek");
-	if ((tail = open(argv[3],O_RDONLY)) < 0) die(argv[3]);
-	while ((i = read (tail,buffer,1024)) > 0)
-		if (write(image,buffer,i) != i) die (argv[1]);
-	if (close(image) < 0) die("close");
-	if (close(tail) < 0) die("close");
-    	return 0;
-}
diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c
deleted file mode 100644
index a26a686cb5a..00000000000
--- a/arch/sparc/boot/piggyback_64.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
-   Simple utility to make a single-image install kernel with initial ramdisk
-   for Sparc64 tftpbooting without need to set up nfs.
-   
-   Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
-   
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-   
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-   
-#include <stdio.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <dirent.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-
-/* Note: run this on an a.out kernel (use elftoaout for it), as PROM looks for a.out image onlly
-   usage: piggyback vmlinux System.map tail, where tail is gzipped fs of the initial ramdisk */
-
-static void die(char *str)
-{
-	perror (str);
-	exit(1);
-}
-
-int main(int argc,char **argv)
-{
-	char buffer [1024], *q, *r;
-	unsigned int i, j, k, start, end, offset;
-	FILE *map;
-	struct stat s;
-	int image, tail;
-	
-	start = end = 0;
-	if (stat (argv[3], &s) < 0) die (argv[3]);
-	map = fopen (argv[2], "r");
-	if (!map) die(argv[2]);
-	while (fgets (buffer, 1024, map)) {
-		if (!strcmp (buffer + 19, "_start\n"))
-		start = strtoul (buffer + 8, NULL, 16);
-		else if (!strcmp (buffer + 19, "_end\n"))
-		end = strtoul (buffer + 8, NULL, 16);
-	}
-	fclose (map);
-	if ((image = open(argv[1],O_RDWR)) < 0) die(argv[1]);
-	if (read(image,buffer,512) != 512) die(argv[1]);
-	if (!memcmp (buffer, "\177ELF", 4)) {
-		unsigned int *p = (unsigned int *)(buffer + *(unsigned int *)(buffer + 28));
-		
-		i = p[1] + *(unsigned int *)(buffer + 24) - p[2];
-		if (lseek(image,i,0) < 0) die("lseek");
-		if (read(image,buffer,512) != 512) die(argv[1]);
-		j = 0;
-	} else if (*(unsigned int *)buffer == 0x01030107) {
-		i = j = 32;
-	} else {
-		fprintf (stderr, "Not ELF nor a.out. Don't blame me.\n");
-		exit(1);
-	}
-	k = i;
-	if (j == 32 && buffer[40] == 'H' && buffer[41] == 'd' && buffer[42] == 'r' && buffer[43] == 'S') {
-		offset = 40 + 10;
-	} else {
-		i += ((*(unsigned short *)(buffer + j + 2))<<2) - 512;
-		if (lseek(image,i,0) < 0) die("lseek");
-		if (read(image,buffer,1024) != 1024) die(argv[1]);
-		for (q = buffer, r = q + 512; q < r; q += 4) {
-			if (*q == 'H' && q[1] == 'd' && q[2] == 'r' && q[3] == 'S')
-				break;
-		}
-		if (q == r) {
-			fprintf (stderr, "Couldn't find headers signature in the kernel.\n");
-			exit(1);
-		}
-		offset = i + (q - buffer) + 10;
-	}
-	if (lseek(image, offset, 0) < 0) die ("lseek");
-	*(unsigned *)buffer = 0;
-	*(unsigned *)(buffer + 4) = 0x01000000;
-	*(unsigned *)(buffer + 8) = ((end + 32 + 8191) & ~8191);
-	*(unsigned *)(buffer + 12) = s.st_size;
-	if (write(image,buffer+2,14) != 14) die (argv[1]);
-	if (lseek(image, 4, 0) < 0) die ("lseek");
-	*(unsigned *)buffer = ((end + 32 + 8191) & ~8191) - (start & ~0x3fffffUL) + s.st_size;
-	*(unsigned *)(buffer + 4) = 0;
-	*(unsigned *)(buffer + 8) = 0;
-	if (write(image,buffer,12) != 12) die (argv[1]);
-	if (lseek(image, k - start + ((end + 32 + 8191) & ~8191), 0) < 0) die ("lseek");
-	if ((tail = open(argv[3],O_RDONLY)) < 0) die(argv[3]);
-	while ((i = read (tail,buffer,1024)) > 0)
-		if (write(image,buffer,i) != i) die (argv[1]);
-	if (close(image) < 0) die("close");
-	if (close(tail) < 0) die("close");
-    	return 0;
-}
diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h
index 53f4ee009bd..ed3807b96bb 100644
--- a/arch/sparc/include/asm/ioctls.h
+++ b/arch/sparc/include/asm/ioctls.h
@@ -19,6 +19,7 @@
 #define TCSETS2		_IOW('T', 13, struct termios2)
 #define TCSETSW2	_IOW('T', 14, struct termios2)
 #define TCSETSF2	_IOW('T', 15, struct termios2)
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 
 /* Note that all the ioctls that are not available in Linux have a 
  * double underscore on the front to: a) avoid some programs to
diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h
index 3ea5964c43b..8580d1764f9 100644
--- a/arch/sparc/include/asm/leon.h
+++ b/arch/sparc/include/asm/leon.h
@@ -224,6 +224,18 @@ static inline void sparc_leon3_disable_cache(void)
 			  "sta %%l2, [%%g0] 2\n\t" : : : "l1", "l2");
 };
 
+static inline unsigned long sparc_leon3_asr17(void)
+{
+	u32 asr17;
+	__asm__ __volatile__ ("rd %%asr17, %0\n\t" : "=r"(asr17));
+	return asr17;
+};
+
+static inline int sparc_leon3_cpuid(void)
+{
+	return sparc_leon3_asr17() >> 28;
+}
+
 #endif /*!__ASSEMBLY__*/
 
 #ifdef CONFIG_SMP
diff --git a/arch/sparc/include/asm/leon_amba.h b/arch/sparc/include/asm/leon_amba.h
index 618e8882179..263c719e96f 100644
--- a/arch/sparc/include/asm/leon_amba.h
+++ b/arch/sparc/include/asm/leon_amba.h
@@ -100,9 +100,8 @@ struct leon3_irqctrl_regs_map {
 	u32 mpbroadcast;
 	u32 notused02;
 	u32 notused03;
-	u32 notused10;
-	u32 notused11;
-	u32 notused12;
+	u32 ampctrl;
+	u32 icsel[2];
 	u32 notused13;
 	u32 notused20;
 	u32 notused21;
@@ -112,6 +111,7 @@ struct leon3_irqctrl_regs_map {
 	u32 force[16];
 	/* Extended IRQ registers */
 	u32 intid[16];	/* 0xc0 */
+	u32 unused[(0x1000-0x100)/4];
 };
 
 struct leon3_apbuart_regs_map {
diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h
index 81cd43432dc..47eaafad15c 100644
--- a/arch/sparc/include/asm/openprom.h
+++ b/arch/sparc/include/asm/openprom.h
@@ -39,7 +39,7 @@ struct linux_dev_v2_funcs {
 	int (*v2_dev_open)(char *devpath);
 	void (*v2_dev_close)(int d);
 	int (*v2_dev_read)(int d, char *buf, int nbytes);
-	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, const char *buf, int nbytes);
 	int (*v2_dev_seek)(int d, int hi, int lo);
 
 	/* Never issued (multistage load support) */
diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
index 51296a6f500..71e5e9aeb67 100644
--- a/arch/sparc/include/asm/oplib_32.h
+++ b/arch/sparc/include/asm/oplib_32.h
@@ -48,37 +48,6 @@ extern void prom_init(struct linux_romvec *rom_ptr);
 /* Boot argument acquisition, returns the boot command line string. */
 extern char *prom_getbootargs(void);
 
-/* Device utilities. */
-
-/* Map and unmap devices in IO space at virtual addresses. Note that the
- * virtual address you pass is a request and the prom may put your mappings
- * somewhere else, so check your return value as that is where your new
- * mappings really are!
- *
- * Another note, these are only available on V2 or higher proms!
- */
-extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
-extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
-
-/* Device operations. */
-
-/* Open the device described by the passed string.  Note, that the format
- * of the string is different on V0 vs. V2->higher proms.  The caller must
- * know what he/she is doing!  Returns the device descriptor, an int.
- */
-extern int prom_devopen(char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
-		      unsigned int seek_lowval);
-
 /* Miscellaneous routines, don't really fit in any category per se. */
 
 /* Reboot the machine with the command line passed. */
@@ -95,7 +64,7 @@ extern void prom_cmdline(void);
 /* Enter the prom, with no chance of continuation for the stand-alone
  * which calls this.
  */
-extern void prom_halt(void) __attribute__ ((noreturn));
+extern void __noreturn prom_halt(void);
 
 /* Set the PROM 'sync' callback function to the passed function pointer.
  * When the user gives the 'sync' command at the prom prompt while the
@@ -121,19 +90,8 @@ extern int prom_getrev(void);
 /* Get the prom firmware revision. */
 extern int prom_getprev(void);
 
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);
 
 /* Prom's internal routines, don't use in kernel/boot code. */
 extern void prom_printf(const char *fmt, ...);
@@ -147,25 +105,6 @@ extern void prom_write(const char *buf, unsigned int len);
 extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
 			 int context, char *program_counter);
 
-/* Stop the CPU with the passed device tree node. */
-extern int prom_stopcpu(int cpunode);
-
-/* Idle the CPU with the passed device tree node. */
-extern int prom_idlecpu(int cpunode);
-
-/* Re-Start the CPU with the passed device tree node. */
-extern int prom_restartcpu(int cpunode);
-
-/* PROM memory allocation facilities... */
-
-/* Allocated at possibly the given virtual address a chunk of the
- * indicated size.
- */
-extern char *prom_alloc(char *virt_hint, unsigned int size);
-
-/* Free a previously allocated chunk. */
-extern void prom_free(char *virt_addr, unsigned int size);
-
 /* Sun4/sun4c specific memory-management startup hook. */
 
 /* Map the passed segment in the given context at the passed
@@ -174,6 +113,8 @@ extern void prom_free(char *virt_addr, unsigned int size);
 extern void prom_putsegment(int context, unsigned long virt_addr,
 			    int physical_segment);
 
+/* Initialize the memory lists based upon the prom version. */
+void prom_meminit(void);
 
 /* PROM device tree traversal functions... */
 
@@ -208,19 +149,11 @@ extern int prom_getbool(phandle node, char *prop);
 /* Acquire a string property, null string on error. */
 extern void prom_getstring(phandle node, char *prop, char *buf, int bufsize);
 
-/* Does the passed node have the given "name"? YES=1 NO=0 */
-extern int prom_nodematch(phandle thisnode, char *name);
-
 /* Search all siblings starting at the passed node for "name" matching
  * the given string.  Returns the node on success, zero on failure.
  */
 extern phandle prom_searchsiblings(phandle node_start, char *name);
 
-/* Return the first property type, as a string, for the given node.
- * Returns a null string on error.
- */
-extern char *prom_firstprop(phandle node, char *buffer);
-
 /* Returns the next property after the passed property for the given
  * node.  Returns null string on failure.
  */
@@ -229,16 +162,12 @@ extern char *prom_nextprop(phandle node, char *prev_property, char *buffer);
 /* Returns phandle of the path specified */
 extern phandle prom_finddevice(char *name);
 
-/* Returns 1 if the specified node has given property. */
-extern int prom_node_has_property(phandle node, char *property);
-
 /* Set the indicated property at the given node with the passed value.
  * Returns the number of bytes of your value that the prom took.
  */
 extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
 			int value_size);
 
-extern phandle prom_pathtoinode(char *path);
 extern phandle prom_inst2pkg(int);
 
 /* Dorking with Bus ranges... */
@@ -250,6 +179,8 @@ extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nr
 extern void prom_apply_generic_ranges(phandle node, phandle parent,
 				      struct linux_prom_registers *sbusregs, int nregs);
 
+void prom_ranges_init(void);
+
 /* CPU probing helpers.  */
 int cpu_find_by_instance(int instance, phandle *prom_node, int *mid);
 int cpu_find_by_mid(int mid, phandle *prom_node);
diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
index c9cc078e3e3..97a90475c31 100644
--- a/arch/sparc/include/asm/oplib_64.h
+++ b/arch/sparc/include/asm/oplib_64.h
@@ -18,8 +18,8 @@ extern char prom_version[];
  */
 extern phandle prom_root_node;
 
-/* PROM stdin and stdout */
-extern int prom_stdin, prom_stdout;
+/* PROM stdout */
+extern int prom_stdout;
 
 /* /chosen node of the prom device tree, this stays constant after
  * initialization is complete.
@@ -67,27 +67,6 @@ extern void prom_init(void *cif_handler, void *cif_stack);
 /* Boot argument acquisition, returns the boot command line string. */
 extern char *prom_getbootargs(void);
 
-/* Device utilities. */
-
-/* Device operations. */
-
-/* Open the device described by the passed string.  Note, that the format
- * of the string is different on V0 vs. V2->higher proms.  The caller must
- * know what he/she is doing!  Returns the device descriptor, an int.
- */
-extern int prom_devopen(const char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
-		      unsigned int seek_lowval);
-
 /* Miscellaneous routines, don't really fit in any category per se. */
 
 /* Reboot the machine with the command line passed. */
@@ -109,33 +88,14 @@ extern void prom_halt(void) __attribute__ ((noreturn));
 /* Halt and power-off the machine. */
 extern void prom_halt_power_off(void) __attribute__ ((noreturn));
 
-/* Set the PROM 'sync' callback function to the passed function pointer.
- * When the user gives the 'sync' command at the prom prompt while the
- * kernel is still active, the prom will call this routine.
- *
- */
-typedef int (*callback_func_t)(long *cmd);
-extern void prom_setcallback(callback_func_t func_ptr);
-
 /* Acquire the IDPROM of the root node in the prom device tree.  This
  * gets passed a buffer where you would like it stuffed.  The return value
  * is the format type of this idprom or 0xff on error.
  */
 extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
 
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);
 
 /* Prom's internal routines, don't use in kernel/boot code. */
 extern void prom_printf(const char *fmt, ...);
@@ -279,9 +239,7 @@ extern phandle prom_finddevice(const char *name);
 extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
 			int value_size);
 
-extern phandle prom_pathtoinode(const char *path);
 extern phandle prom_inst2pkg(int);
-extern int prom_service_exists(const char *service_name);
 extern void prom_sun4v_guest_soft_state(void);
 
 extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
diff --git a/arch/sparc/include/asm/perf_event.h b/arch/sparc/include/asm/perf_event.h
index 6e8bfa1786d..4d3dbe3703e 100644
--- a/arch/sparc/include/asm/perf_event.h
+++ b/arch/sparc/include/asm/perf_event.h
@@ -4,8 +4,6 @@
 #ifdef CONFIG_PERF_EVENTS
 #include <asm/ptrace.h>
 
-extern void init_hw_perf_events(void);
-
 #define perf_arch_fetch_caller_regs(regs, ip)		\
 do {							\
 	unsigned long _pstate, _asi, _pil, _i7, _fp;	\
@@ -26,8 +24,6 @@ do {							\
 	(regs)->u_regs[UREG_I6] = _fp;			\
 	(regs)->u_regs[UREG_I7] = _i7;			\
 } while (0)
-#else
-static inline void init_hw_perf_events(void)	{ }
 #endif
 
 #endif
diff --git a/arch/sparc/kernel/head_32.S b/arch/sparc/kernel/head_32.S
index 21bb2590d4a..59423491cef 100644
--- a/arch/sparc/kernel/head_32.S
+++ b/arch/sparc/kernel/head_32.S
@@ -73,12 +73,11 @@ sun4e_notsup:
 
 	/* The Sparc trap table, bootloader gives us control at _start. */
 	__HEAD
-	.globl	start, _stext, _start, __stext
+	.globl	_stext, _start, __stext
 	.globl  trapbase
 _start:   /* danger danger */
 __stext:
 _stext:
-start:
 trapbase:
 #ifdef CONFIG_SMP
 trapbase_cpu0:
diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c
index 2d51527d810..fdab7f854f8 100644
--- a/arch/sparc/kernel/leon_kernel.c
+++ b/arch/sparc/kernel/leon_kernel.c
@@ -23,15 +23,16 @@
 #include "prom.h"
 #include "irq.h"
 
-struct leon3_irqctrl_regs_map *leon3_irqctrl_regs; /* interrupt controller base address, initialized by amba_init() */
-struct leon3_gptimer_regs_map *leon3_gptimer_regs; /* timer controller base address, initialized by amba_init() */
+struct leon3_irqctrl_regs_map *leon3_irqctrl_regs; /* interrupt controller base address */
+struct leon3_gptimer_regs_map *leon3_gptimer_regs; /* timer controller base address */
 struct amba_apb_device leon_percpu_timer_dev[16];
 
 int leondebug_irq_disable;
 int leon_debug_irqout;
 static int dummy_master_l10_counter;
 
-unsigned long leon3_gptimer_irq; /* interrupt controller irq number, initialized by amba_init() */
+unsigned long leon3_gptimer_irq; /* interrupt controller irq number */
+unsigned long leon3_gptimer_idx; /* Timer Index (0..6) within Timer Core */
 unsigned int sparc_leon_eirq;
 #define LEON_IMASK ((&leon3_irqctrl_regs->mask[0]))
 
@@ -105,21 +106,79 @@ static void leon_disable_irq(unsigned int irq_nr)
 void __init leon_init_timers(irq_handler_t counter_fn)
 {
 	int irq;
+	struct device_node *rootnp, *np, *nnp;
+	struct property *pp;
+	int len;
+	int cpu, icsel;
+	int ampopts;
 
 	leondebug_irq_disable = 0;
 	leon_debug_irqout = 0;
 	master_l10_counter = (unsigned int *)&dummy_master_l10_counter;
 	dummy_master_l10_counter = 0;
 
-	if (leon3_gptimer_regs && leon3_irqctrl_regs) {
-		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0);
-		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld,
-				      (((1000000 / 100) - 1)));
-		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);
+	/*Find IRQMP IRQ Controller Registers base address otherwise bail out.*/
+	rootnp = of_find_node_by_path("/ambapp0");
+	if (!rootnp)
+		goto bad;
+	np = of_find_node_by_name(rootnp, "GAISLER_IRQMP");
+	if (!np) {
+		np = of_find_node_by_name(rootnp, "01_00d");
+		if (!np)
+			goto bad;
+	}
+	pp = of_find_property(np, "reg", &len);
+	if (!pp)
+		goto bad;
+	leon3_irqctrl_regs = *(struct leon3_irqctrl_regs_map **)pp->value;
+
+	/* Find GPTIMER Timer Registers base address otherwise bail out. */
+	nnp = rootnp;
+	do {
+		np = of_find_node_by_name(nnp, "GAISLER_GPTIMER");
+		if (!np) {
+			np = of_find_node_by_name(nnp, "01_011");
+			if (!np)
+				goto bad;
+		}
+
+		ampopts = 0;
+		pp = of_find_property(np, "ampopts", &len);
+		if (pp) {
+			ampopts = *(int *)pp->value;
+			if (ampopts == 0) {
+				/* Skip this instance, resource already
+				 * allocated by other OS */
+				nnp = np;
+				continue;
+			}
+		}
+
+		/* Select Timer-Instance on Timer Core. Default is zero */
+		leon3_gptimer_idx = ampopts & 0x7;
+
+		pp = of_find_property(np, "reg", &len);
+		if (pp)
+			leon3_gptimer_regs = *(struct leon3_gptimer_regs_map **)
+						pp->value;
+		pp = of_find_property(np, "interrupts", &len);
+		if (pp)
+			leon3_gptimer_irq = *(unsigned int *)pp->value;
+	} while (0);
+
+	if (leon3_gptimer_regs && leon3_irqctrl_regs && leon3_gptimer_irq) {
+		LEON3_BYPASS_STORE_PA(
+			&leon3_gptimer_regs->e[leon3_gptimer_idx].val, 0);
+		LEON3_BYPASS_STORE_PA(
+			&leon3_gptimer_regs->e[leon3_gptimer_idx].rld,
+			(((1000000 / HZ) - 1)));
+		LEON3_BYPASS_STORE_PA(
+			&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl, 0);
 
 #ifdef CONFIG_SMP
 		leon_percpu_timer_dev[0].start = (int)leon3_gptimer_regs;
-		leon_percpu_timer_dev[0].irq = leon3_gptimer_irq+1;
+		leon_percpu_timer_dev[0].irq = leon3_gptimer_irq + 1 +
+					       leon3_gptimer_idx;
 
 		if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
 		      (1<<LEON3_GPTIMER_SEPIRQ))) {
@@ -127,17 +186,33 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 			BUG();
 		}
 
-		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0);
-		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1)));
-		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0);
+		LEON3_BYPASS_STORE_PA(
+			&leon3_gptimer_regs->e[leon3_gptimer_idx+1].val, 0);
+		LEON3_BYPASS_STORE_PA(
+			&leon3_gptimer_regs->e[leon3_gptimer_idx+1].rld,
+			(((1000000/HZ) - 1)));
+		LEON3_BYPASS_STORE_PA(
+			&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl, 0);
 # endif
 
+		/*
+		 * The IRQ controller may (if implemented) consist of multiple
+		 * IRQ controllers, each mapped on a 4Kb boundary.
+		 * Each CPU may be routed to different IRQCTRLs, however
+		 * we assume that all CPUs (in SMP system) is routed to the
+		 * same IRQ Controller, and for non-SMP only one IRQCTRL is
+		 * accessed anyway.
+		 * In AMP systems, Linux must run on CPU0 for the time being.
+		 */
+		cpu = sparc_leon3_cpuid();
+		icsel = LEON3_BYPASS_LOAD_PA(&leon3_irqctrl_regs->icsel[cpu/8]);
+		icsel = (icsel >> ((7 - (cpu&0x7)) * 4)) & 0xf;
+		leon3_irqctrl_regs += icsel;
 	} else {
-		printk(KERN_ERR "No Timer/irqctrl found\n");
-		BUG();
+		goto bad;
 	}
 
-	irq = request_irq(leon3_gptimer_irq,
+	irq = request_irq(leon3_gptimer_irq+leon3_gptimer_idx,
 			  counter_fn,
 			  (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL);
 
@@ -169,13 +244,13 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 # endif
 
 	if (leon3_gptimer_regs) {
-		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl,
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl,
 				      LEON3_GPTIMER_EN |
 				      LEON3_GPTIMER_RL |
 				      LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN);
 
 #ifdef CONFIG_SMP
-		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl,
+		LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl,
 				      LEON3_GPTIMER_EN |
 				      LEON3_GPTIMER_RL |
 				      LEON3_GPTIMER_LD |
@@ -183,6 +258,11 @@ void __init leon_init_timers(irq_handler_t counter_fn)
 #endif
 
 	}
+	return;
+bad:
+	printk(KERN_ERR "No Timer/irqctrl found\n");
+	BUG();
+	return;
 }
 
 void leon_clear_clock_irq(void)
diff --git a/arch/sparc/kernel/leon_smp.c b/arch/sparc/kernel/leon_smp.c
index 7524689b03d..16582d85368 100644
--- a/arch/sparc/kernel/leon_smp.c
+++ b/arch/sparc/kernel/leon_smp.c
@@ -12,7 +12,6 @@
 #include <linux/sched.h>
 #include <linux/threads.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 #include <linux/init.h>
diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c
index a4bd7ba74c8..300f810142f 100644
--- a/arch/sparc/kernel/nmi.c
+++ b/arch/sparc/kernel/nmi.c
@@ -270,8 +270,6 @@ int __init nmi_init(void)
 			atomic_set(&nmi_active, -1);
 		}
 	}
-	if (!err)
-		init_hw_perf_events();
 
 	return err;
 }
diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c
index 0d6deb55a2a..760578687e7 100644
--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1307,20 +1307,23 @@ static bool __init supported_pmu(void)
 	return false;
 }
 
-void __init init_hw_perf_events(void)
+int __init init_hw_perf_events(void)
 {
 	pr_info("Performance events: ");
 
 	if (!supported_pmu()) {
 		pr_cont("No support for PMU type '%s'\n", sparc_pmu_type);
-		return;
+		return 0;
 	}
 
 	pr_cont("Supported PMU type is '%s'\n", sparc_pmu_type);
 
-	perf_pmu_register(&pmu);
+	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
 	register_die_notifier(&perf_event_nmi_notifier);
+
+	return 0;
 }
+early_initcall(init_hw_perf_events);
 
 void perf_callchain_kernel(struct perf_callchain_entry *entry,
 			   struct pt_regs *regs)
diff --git a/arch/sparc/kernel/prom_32.c b/arch/sparc/kernel/prom_32.c
index 0a37e8cfd16..05fb2533058 100644
--- a/arch/sparc/kernel/prom_32.c
+++ b/arch/sparc/kernel/prom_32.c
@@ -136,18 +136,29 @@ static void __init ebus_path_component(struct device_node *dp, char *tmp_buf)
 /* "name:vendor:device@irq,addrlo" */
 static void __init ambapp_path_component(struct device_node *dp, char *tmp_buf)
 {
-	struct amba_prom_registers *regs; unsigned int *intr;
-	unsigned int *device, *vendor;
+	struct amba_prom_registers *regs;
+	unsigned int *intr, *device, *vendor, reg0;
 	struct property *prop;
+	int interrupt = 0;
 
+	/* In order to get a unique ID in the device tree (multiple AMBA devices
+	 * may have the same name) the node number is printed
+	 */
 	prop = of_find_property(dp, "reg", NULL);
-	if (!prop)
-		return;
-	regs = prop->value;
+	if (!prop) {
+		reg0 = (unsigned int)dp->phandle;
+	} else {
+		regs = prop->value;
+		reg0 = regs->phys_addr;
+	}
+
+	/* Not all cores have Interrupt */
 	prop = of_find_property(dp, "interrupts", NULL);
 	if (!prop)
-		return;
-	intr = prop->value;
+		intr = &interrupt; /* IRQ0 does not exist */
+	else
+		intr = prop->value;
+
 	prop = of_find_property(dp, "vendor", NULL);
 	if (!prop)
 		return;
@@ -159,7 +170,7 @@ static void __init ambapp_path_component(struct device_node *dp, char *tmp_buf)
 
 	sprintf(tmp_buf, "%s:%d:%d@%x,%x",
 		dp->name, *vendor, *device,
-		*intr, regs->phys_addr);
+		*intr, reg0);
 }
 
 static void __init __build_path_component(struct device_node *dp, char *tmp_buf)
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index b22ce610040..648f2161b85 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -185,7 +185,6 @@ static void __init boot_flags_init(char *commands)
 
 extern void sun4c_probe_vac(void);
 extern char cputypval;
-extern unsigned long start, end;
 
 extern unsigned short root_flags;
 extern unsigned short root_dev;
@@ -210,7 +209,7 @@ void __init setup_arch(char **cmdline_p)
 	int i;
 	unsigned long highest_paddr;
 
-	sparc_ttable = (struct tt_entry *) &start;
+	sparc_ttable = (struct tt_entry *) &trapbase;
 
 	/* Initialize PROM console and command line. */
 	*cmdline_p = prom_getbootargs();
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index e6375a750d9..6db18c6927f 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -17,7 +17,6 @@
 #include <linux/resource.h>
 #include <linux/times.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/sem.h>
 #include <linux/msg.h>
 #include <linux/shm.h>
diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c
index 675c9e11ada..42b282fa611 100644
--- a/arch/sparc/kernel/sys_sparc_32.c
+++ b/arch/sparc/kernel/sys_sparc_32.c
@@ -19,7 +19,6 @@
 #include <linux/mman.h>
 #include <linux/utsname.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/ipc.h>
 
 #include <asm/uaccess.h>
diff --git a/arch/sparc/kernel/unaligned_32.c b/arch/sparc/kernel/unaligned_32.c
index 12b9f352595..4491f4cb269 100644
--- a/arch/sparc/kernel/unaligned_32.c
+++ b/arch/sparc/kernel/unaligned_32.c
@@ -16,7 +16,6 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/perf_event.h>
 
 enum direction {
diff --git a/arch/sparc/kernel/windows.c b/arch/sparc/kernel/windows.c
index b351770cbdd..3107381e576 100644
--- a/arch/sparc/kernel/windows.c
+++ b/arch/sparc/kernel/windows.c
@@ -9,7 +9,6 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index ddd0d86e508..b5137cc2aba 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -435,16 +435,14 @@ void __init sun4c_probe_memerr_reg(void)
 
 static inline void sun4c_init_ss2_cache_bug(void)
 {
-	extern unsigned long start;
-
 	if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS2)) ||
 	    (idprom->id_machtype == (SM_SUN4C | SM_4C_IPX)) ||
 	    (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC))) {
 		/* Whee.. */
 		printk("SS2 cache bug detected, uncaching trap table page\n");
-		sun4c_flush_page((unsigned int) &start);
-		sun4c_put_pte(((unsigned long) &start),
-			(sun4c_get_pte((unsigned long) &start) | _SUN4C_PAGE_NOCACHE));
+		sun4c_flush_page((unsigned int) &_start);
+		sun4c_put_pte(((unsigned long) &_start),
+			(sun4c_get_pte((unsigned long) &_start) | _SUN4C_PAGE_NOCACHE));
 	}
 }
 
diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile
index 1b8c073adb4..8287bbe8876 100644
--- a/arch/sparc/prom/Makefile
+++ b/arch/sparc/prom/Makefile
@@ -5,13 +5,10 @@ asflags := -ansi
 ccflags := -Werror
 
 lib-y                 := bootstr_$(BITS).o
-lib-$(CONFIG_SPARC32) += devmap.o
-lib-y                 += devops_$(BITS).o
 lib-y                 += init_$(BITS).o
 lib-$(CONFIG_SPARC32) += memory.o
 lib-y                 += misc_$(BITS).o
 lib-$(CONFIG_SPARC32) += mp.o
-lib-$(CONFIG_SPARC32) += palloc.o
 lib-$(CONFIG_SPARC32) += ranges.o
 lib-$(CONFIG_SPARC32) += segment.o
 lib-y                 += console_$(BITS).o
diff --git a/arch/sparc/prom/bootstr_32.c b/arch/sparc/prom/bootstr_32.c
index 916831da7e6..f5ec32e0d41 100644
--- a/arch/sparc/prom/bootstr_32.c
+++ b/arch/sparc/prom/bootstr_32.c
@@ -29,7 +29,8 @@ prom_getbootargs(void)
 		/* Start from 1 and go over fd(0,0,0)kernel */
 		for(iter = 1; iter < 8; iter++) {
 			arg = (*(romvec->pv_v0bootargs))->argv[iter];
-			if(arg == 0) break;
+			if (arg == NULL)
+				break;
 			while(*arg != 0) {
 				/* Leave place for space and null. */
 				if(cp >= barg_buf + BARG_LEN-2){
diff --git a/arch/sparc/prom/console_32.c b/arch/sparc/prom/console_32.c
index 5340264b78f..b05e3db5fa6 100644
--- a/arch/sparc/prom/console_32.c
+++ b/arch/sparc/prom/console_32.c
@@ -16,63 +16,27 @@
 
 extern void restore_current(void);
 
-/* Non blocking get character from console input device, returns -1
- * if no input was taken.  This can be used for polling.
- */
-int
-prom_nbgetchar(void)
-{
-	static char inc;
-	int i = -1;
-	unsigned long flags;
-
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		i = (*(romvec->pv_nbgetchar))();
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		if( (*(romvec->pv_v2devops).v2_dev_read)(*romvec->pv_v2bootargs.fd_stdin , &inc, 0x1) == 1) {
-			i = inc;
-		} else {
-			i = -1;
-		}
-		break;
-	default:
-		i = -1;
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-	return i; /* Ugh, we could spin forever on unsupported proms ;( */
-}
-
 /* Non blocking put character to console device, returns -1 if
  * unsuccessful.
  */
-int
-prom_nbputchar(char c)
+static int prom_nbputchar(const char *buf)
 {
-	static char outc;
 	unsigned long flags;
 	int i = -1;
 
 	spin_lock_irqsave(&prom_lock, flags);
 	switch(prom_vers) {
 	case PROM_V0:
-		i = (*(romvec->pv_nbputchar))(c);
+		if ((*(romvec->pv_nbputchar))(*buf))
+			i = 1;
 		break;
 	case PROM_V2:
 	case PROM_V3:
-		outc = c;
-		if( (*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout, &outc, 0x1) == 1)
-			i = 0;
-		else
-			i = -1;
+		if ((*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout,
+							  buf, 0x1) == 1)
+			i = 1;
 		break;
 	default:
-		i = -1;
 		break;
 	};
 	restore_current();
@@ -80,18 +44,14 @@ prom_nbputchar(char c)
 	return i; /* Ugh, we could spin forever on unsupported proms ;( */
 }
 
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
+void prom_console_write_buf(const char *buf, int len)
 {
-	int character;
-	while((character = prom_nbgetchar()) == -1) ;
-	return (char) character;
+	while (len) {
+		int n = prom_nbputchar(buf);
+		if (n < 0)
+			continue;
+		len--;
+		buf++;
+	}
 }
 
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
-{
-	while(prom_nbputchar(c) == -1) ;
-}
diff --git a/arch/sparc/prom/console_64.c b/arch/sparc/prom/console_64.c
index 10322dc2f55..9de6c8cfe04 100644
--- a/arch/sparc/prom/console_64.c
+++ b/arch/sparc/prom/console_64.c
@@ -13,87 +13,34 @@
 #include <asm/system.h>
 #include <linux/string.h>
 
-extern int prom_stdin, prom_stdout;
-
-/* Non blocking get character from console input device, returns -1
- * if no input was taken.  This can be used for polling.
- */
-inline int
-prom_nbgetchar(void)
+static int __prom_console_write_buf(const char *buf, int len)
 {
 	unsigned long args[7];
-	char inc;
-
-	args[0] = (unsigned long) "read";
-	args[1] = 3;
-	args[2] = 1;
-	args[3] = (unsigned int) prom_stdin;
-	args[4] = (unsigned long) &inc;
-	args[5] = 1;
-	args[6] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
-
-	if (args[6] == 1)
-		return inc;
-	return -1;
-}
-
-/* Non blocking put character to console device, returns -1 if
- * unsuccessful.
- */
-inline int
-prom_nbputchar(char c)
-{
-	unsigned long args[7];
-	char outc;
-	
-	outc = c;
+	int ret;
 
 	args[0] = (unsigned long) "write";
 	args[1] = 3;
 	args[2] = 1;
 	args[3] = (unsigned int) prom_stdout;
-	args[4] = (unsigned long) &outc;
-	args[5] = 1;
+	args[4] = (unsigned long) buf;
+	args[5] = (unsigned int) len;
 	args[6] = (unsigned long) -1;
 
 	p1275_cmd_direct(args);
 
-	if (args[6] == 1)
-		return 0;
-	else
+	ret = (int) args[6];
+	if (ret < 0)
 		return -1;
+	return ret;
 }
 
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
+void prom_console_write_buf(const char *buf, int len)
 {
-	int character;
-	while((character = prom_nbgetchar()) == -1) ;
-	return (char) character;
-}
-
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
-{
-	prom_nbputchar(c);
-}
-
-void
-prom_puts(const char *s, int len)
-{
-	unsigned long args[7];
-
-	args[0] = (unsigned long) "write";
-	args[1] = 3;
-	args[2] = 1;
-	args[3] = (unsigned int) prom_stdout;
-	args[4] = (unsigned long) s;
-	args[5] = len;
-	args[6] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
+	while (len) {
+		int n = __prom_console_write_buf(buf, len);
+		if (n < 0)
+			continue;
+		len -= n;
+		buf += len;
+	}
 }
diff --git a/arch/sparc/prom/devmap.c b/arch/sparc/prom/devmap.c
deleted file mode 100644
index 46157d2aba0..00000000000
--- a/arch/sparc/prom/devmap.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * promdevmap.c:  Map device/IO areas to virtual addresses.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-extern void restore_current(void);
-
-/* Just like the routines in palloc.c, these should not be used
- * by the kernel at all.  Bootloader facility mainly.  And again,
- * this is only available on V2 proms and above.
- */
-
-/* Map physical device address 'paddr' in IO space 'ios' of size
- * 'num_bytes' to a virtual address, with 'vhint' being a hint to
- * the prom as to where you would prefer the mapping.  We return
- * where the prom actually mapped it.
- */
-char *
-prom_mapio(char *vhint, int ios, unsigned int paddr, unsigned int num_bytes)
-{
-	unsigned long flags;
-	char *ret;
-
-	spin_lock_irqsave(&prom_lock, flags);
-	if((num_bytes == 0) || (paddr == 0)) ret = (char *) 0x0;
-	else
-	ret = (*(romvec->pv_v2devops.v2_dumb_mmap))(vhint, ios, paddr,
-						    num_bytes);
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-	return ret;
-}
-
-/* Unmap an IO/device area that was mapped using the above routine. */
-void
-prom_unmapio(char *vaddr, unsigned int num_bytes)
-{
-	unsigned long flags;
-
-	if(num_bytes == 0x0) return;
-	spin_lock_irqsave(&prom_lock, flags);
-	(*(romvec->pv_v2devops.v2_dumb_munmap))(vaddr, num_bytes);
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-}
diff --git a/arch/sparc/prom/devops_32.c b/arch/sparc/prom/devops_32.c
deleted file mode 100644
index 9c5d4687242..00000000000
--- a/arch/sparc/prom/devops_32.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * devops.c:  Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-extern void restore_current(void);
-
-/* Open the device described by the string 'dstr'.  Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns -1 on failure.
- */
-int
-prom_devopen(char *dstr)
-{
-	int handle;
-	unsigned long flags;
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		handle = (*(romvec->pv_v0devops.v0_devopen))(dstr);
-		if(handle == 0) handle = -1;
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		handle = (*(romvec->pv_v2devops.v2_dev_open))(dstr);
-		break;
-	default:
-		handle = -1;
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-
-	return handle;
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		(*(romvec->pv_v0devops.v0_devclose))(dhandle);
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		(*(romvec->pv_v2devops.v2_dev_close))(dhandle);
-		break;
-	default:
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-	return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-		(*(romvec->pv_v0devops.v0_seekdev))(dhandle, seekhi, seeklo);
-		break;
-	case PROM_V2:
-	case PROM_V3:
-		(*(romvec->pv_v2devops.v2_dev_seek))(dhandle, seekhi, seeklo);
-		break;
-	default:
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-}
diff --git a/arch/sparc/prom/devops_64.c b/arch/sparc/prom/devops_64.c
deleted file mode 100644
index a017119e7ef..00000000000
--- a/arch/sparc/prom/devops_64.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * devops.c:  Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-/* Open the device described by the string 'dstr'.  Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns 0 on failure.
- */
-int
-prom_devopen(const char *dstr)
-{
-	unsigned long args[5];
-
-	args[0] = (unsigned long) "open";
-	args[1] = 1;
-	args[2] = 1;
-	args[3] = (unsigned long) dstr;
-	args[4] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
-
-	return (int) args[4];
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
-	unsigned long args[4];
-
-	args[0] = (unsigned long) "close";
-	args[1] = 1;
-	args[2] = 0;
-	args[3] = (unsigned int) dhandle;
-
-	p1275_cmd_direct(args);
-
-	return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
-	unsigned long args[7];
-
-	args[0] = (unsigned long) "seek";
-	args[1] = 3;
-	args[2] = 1;
-	args[3] = (unsigned int) dhandle;
-	args[4] = seekhi;
-	args[5] = seeklo;
-	args[6] = (unsigned long) -1;
-
-	p1275_cmd_direct(args);
-}
diff --git a/arch/sparc/prom/init_64.c b/arch/sparc/prom/init_64.c
index 3ff911e7d25..9c6ac4b81de 100644
--- a/arch/sparc/prom/init_64.c
+++ b/arch/sparc/prom/init_64.c
@@ -18,7 +18,7 @@
 char prom_version[80];
 
 /* The root node of the prom device tree. */
-int prom_stdin, prom_stdout;
+int prom_stdout;
 phandle prom_chosen_node;
 
 /* You must call prom_init() before you attempt to use any of the
@@ -38,7 +38,6 @@ void __init prom_init(void *cif_handler, void *cif_stack)
 	if (!prom_chosen_node || prom_chosen_node == -1)
 		prom_halt();
 
-	prom_stdin = prom_getint(prom_chosen_node, "stdin");
 	prom_stdout = prom_getint(prom_chosen_node, "stdout");
 
 	node = prom_finddevice("/openprom");
diff --git a/arch/sparc/prom/misc_32.c b/arch/sparc/prom/misc_32.c
index 4d61c540bb3..8c278c311ba 100644
--- a/arch/sparc/prom/misc_32.c
+++ b/arch/sparc/prom/misc_32.c
@@ -70,7 +70,7 @@ prom_cmdline(void)
 /* Drop into the prom, but completely terminate the program.
  * No chance of continuing.
  */
-void
+void __noreturn
 prom_halt(void)
 {
 	unsigned long flags;
diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c
index d24bc44e361..e4f31d4d371 100644
--- a/arch/sparc/prom/misc_64.c
+++ b/arch/sparc/prom/misc_64.c
@@ -18,7 +18,7 @@
 #include <asm/system.h>
 #include <asm/ldc.h>
 
-int prom_service_exists(const char *service_name)
+static int prom_service_exists(const char *service_name)
 {
 	unsigned long args[5];
 
@@ -150,20 +150,6 @@ void prom_halt_power_off(void)
 	prom_halt();
 }
 
-/* Set prom sync handler to call function 'funcp'. */
-void prom_setcallback(callback_func_t funcp)
-{
-	unsigned long args[5];
-	if (!funcp)
-		return;
-	args[0] = (unsigned long) "set-callback";
-	args[1] = 1;
-	args[2] = 1;
-	args[3] = (unsigned long) funcp;
-	args[4] = (unsigned long) -1;
-	p1275_cmd_direct(args);
-}
-
 /* Get the idprom and stuff it into buffer 'idbuf'.  Returns the
  * format type.  'num_bytes' is the number of bytes that your idbuf
  * has space for.  Returns 0xff on error.
diff --git a/arch/sparc/prom/mp.c b/arch/sparc/prom/mp.c
index 4c4dc79f65a..97c44c9ddbc 100644
--- a/arch/sparc/prom/mp.c
+++ b/arch/sparc/prom/mp.c
@@ -41,81 +41,3 @@ prom_startcpu(int cpunode, struct linux_prom_registers *ctable_reg, int ctx, cha
 
 	return ret;
 }
-
-/* Stop CPU with device prom-tree node 'cpunode'.
- * XXX Again, what does the return value really mean? XXX
- */
-int
-prom_stopcpu(int cpunode)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-	case PROM_V2:
-	default:
-		ret = -1;
-		break;
-	case PROM_V3:
-		ret = (*(romvec->v3_cpustop))(cpunode);
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-
-	return ret;
-}
-
-/* Make CPU with device prom-tree node 'cpunode' idle.
- * XXX Return value, anyone? XXX
- */
-int
-prom_idlecpu(int cpunode)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-	case PROM_V2:
-	default:
-		ret = -1;
-		break;
-	case PROM_V3:
-		ret = (*(romvec->v3_cpuidle))(cpunode);
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-
-	return ret;
-}
-
-/* Resume the execution of CPU with nodeid 'cpunode'.
- * XXX Come on, somebody has to know... XXX
- */
-int
-prom_restartcpu(int cpunode)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&prom_lock, flags);
-	switch(prom_vers) {
-	case PROM_V0:
-	case PROM_V2:
-	default:
-		ret = -1;
-		break;
-	case PROM_V3:
-		ret = (*(romvec->v3_cpuresume))(cpunode);
-		break;
-	};
-	restore_current();
-	spin_unlock_irqrestore(&prom_lock, flags);
-
-	return ret;
-}
diff --git a/arch/sparc/prom/palloc.c b/arch/sparc/prom/palloc.c
deleted file mode 100644
index 2e2a88b211f..00000000000
--- a/arch/sparc/prom/palloc.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * palloc.c:  Memory allocation from the Sun PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-/* You should not call these routines after memory management
- * has been initialized in the kernel, if fact you should not
- * use these if at all possible in the kernel.  They are mainly
- * to be used for a bootloader for temporary allocations which
- * it will free before jumping into the kernel it has loaded.
- *
- * Also, these routines don't work on V0 proms, only V2 and later.
- */
-
-/* Allocate a chunk of memory of size 'num_bytes' giving a suggestion
- * of virtual_hint as the preferred virtual base address of this chunk.
- * There are no guarantees that you will get the allocation, or that
- * the prom will abide by your "hint".  So check your return value.
- */
-char *
-prom_alloc(char *virtual_hint, unsigned int num_bytes)
-{
-	if(prom_vers == PROM_V0) return (char *) 0x0;
-	if(num_bytes == 0x0) return (char *) 0x0;
-	return (*(romvec->pv_v2devops.v2_dumb_mem_alloc))(virtual_hint, num_bytes);
-}
-
-/* Free a previously allocated chunk back to the prom at virtual address
- * 'vaddr' of size 'num_bytes'.  NOTE: This vaddr is not the hint you
- * used for the allocation, but the virtual address the prom actually
- * returned to you.  They may be have been the same, they may have not,
- * doesn't matter.
- */
-void
-prom_free(char *vaddr, unsigned int num_bytes)
-{
-	if((prom_vers == PROM_V0) || (num_bytes == 0x0)) return;
-	(*(romvec->pv_v2devops.v2_dumb_mem_free))(vaddr, num_bytes);
-}
diff --git a/arch/sparc/prom/printf.c b/arch/sparc/prom/printf.c
index ca869266b9f..d9682f06b3b 100644
--- a/arch/sparc/prom/printf.c
+++ b/arch/sparc/prom/printf.c
@@ -15,22 +15,45 @@
 
 #include <linux/kernel.h>
 #include <linux/compiler.h>
+#include <linux/spinlock.h>
 
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 
+#define CONSOLE_WRITE_BUF_SIZE	1024
+
 static char ppbuf[1024];
+static char console_write_buf[CONSOLE_WRITE_BUF_SIZE];
+static DEFINE_RAW_SPINLOCK(console_write_lock);
 
 void notrace prom_write(const char *buf, unsigned int n)
 {
-	char ch;
+	unsigned int dest_len;
+	unsigned long flags;
+	char *dest;
+
+	dest = console_write_buf;
+	raw_spin_lock_irqsave(&console_write_lock, flags);
 
-	while (n != 0) {
-		--n;
-		if ((ch = *buf++) == '\n')
-			prom_putchar('\r');
-		prom_putchar(ch);
+	dest_len = 0;
+	while (n-- != 0) {
+		char ch = *buf++;
+		if (ch == '\n') {
+			*dest++ = '\r';
+			dest_len++;
+		}
+		*dest++ = ch;
+		dest_len++;
+		if (dest_len >= CONSOLE_WRITE_BUF_SIZE - 1) {
+			prom_console_write_buf(console_write_buf, dest_len);
+			dest = console_write_buf;
+			dest_len = 0;
+		}
 	}
+	if (dest_len)
+		prom_console_write_buf(console_write_buf, dest_len);
+
+	raw_spin_unlock_irqrestore(&console_write_lock, flags);
 }
 
 void notrace prom_printf(const char *fmt, ...)
diff --git a/arch/sparc/prom/ranges.c b/arch/sparc/prom/ranges.c
index 541fc829c20..0857aa9e839 100644
--- a/arch/sparc/prom/ranges.c
+++ b/arch/sparc/prom/ranges.c
@@ -13,8 +13,8 @@
 #include <asm/types.h>
 #include <asm/system.h>
 
-struct linux_prom_ranges promlib_obio_ranges[PROMREG_MAX];
-int num_obio_ranges;
+static struct linux_prom_ranges promlib_obio_ranges[PROMREG_MAX];
+static int num_obio_ranges;
 
 /* Adjust register values based upon the ranges parameters. */
 static void
@@ -35,7 +35,7 @@ prom_adjust_regs(struct linux_prom_registers *regp, int nregs,
 	}
 }
 
-void
+static void
 prom_adjust_ranges(struct linux_prom_ranges *ranges1, int nranges1,
 		   struct linux_prom_ranges *ranges2, int nranges2)
 {
diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c
index 63e08e14977..bc8e4cb87a6 100644
--- a/arch/sparc/prom/tree_32.c
+++ b/arch/sparc/prom/tree_32.c
@@ -20,7 +20,7 @@ extern void restore_current(void);
 static char promlib_buf[128];
 
 /* Internal version of prom_getchild that does not alter return values. */
-phandle __prom_getchild(phandle node)
+static phandle __prom_getchild(phandle node)
 {
 	unsigned long flags;
 	phandle cnode;
@@ -52,7 +52,7 @@ phandle prom_getchild(phandle node)
 EXPORT_SYMBOL(prom_getchild);
 
 /* Internal version of prom_getsibling that does not alter return values. */
-phandle __prom_getsibling(phandle node)
+static phandle __prom_getsibling(phandle node)
 {
 	unsigned long flags;
 	phandle cnode;
@@ -177,20 +177,6 @@ void prom_getstring(phandle node, char *prop, char *user_buf, int ubuf_size)
 EXPORT_SYMBOL(prom_getstring);
 
 
-/* Does the device at node 'node' have name 'name'?
- * YES = 1   NO = 0
- */
-int prom_nodematch(phandle node, char *name)
-{
-	int error;
-
-	static char namebuf[128];
-	error = prom_getproperty(node, "name", namebuf, sizeof(namebuf));
-	if (error == -1) return 0;
-	if(strcmp(namebuf, name) == 0) return 1;
-	return 0;
-}
-
 /* Search siblings at 'node_start' for a node with name
  * 'nodename'.  Return node if successful, zero if not.
  */
@@ -214,7 +200,7 @@ phandle prom_searchsiblings(phandle node_start, char *nodename)
 EXPORT_SYMBOL(prom_searchsiblings);
 
 /* Interal version of nextprop that does not alter return values. */
-char *__prom_nextprop(phandle node, char * oprop)
+static char *__prom_nextprop(phandle node, char * oprop)
 {
 	unsigned long flags;
 	char *prop;
@@ -227,17 +213,6 @@ char *__prom_nextprop(phandle node, char * oprop)
 	return prop;
 }
 
-/* Return the first property name for node 'node'. */
-/* buffer is unused argument, but as v9 uses it, we need to have the same interface */
-char *prom_firstprop(phandle node, char *bufer)
-{
-	if (node == 0 || node == -1)
-		return "";
-
-	return __prom_nextprop(node, "");
-}
-EXPORT_SYMBOL(prom_firstprop);
-
 /* Return the property type string after property type 'oprop'
  * at node 'node' .  Returns empty string if no more
  * property types for this node.
@@ -299,19 +274,6 @@ phandle prom_finddevice(char *name)
 }
 EXPORT_SYMBOL(prom_finddevice);
 
-int prom_node_has_property(phandle node, char *prop)
-{
-	char *current_property = "";
-
-	do {
-		current_property = prom_nextprop(node, current_property, NULL);
-		if(!strcmp(current_property, prop))
-		   return 1;
-	} while (*current_property);
-	return 0;
-}
-EXPORT_SYMBOL(prom_node_has_property);
-
 /* Set property 'pname' at node 'node' to value 'value' which has a length
  * of 'size' bytes.  Return the number of bytes the prom accepted.
  */
@@ -320,8 +282,10 @@ int prom_setprop(phandle node, const char *pname, char *value, int size)
 	unsigned long flags;
 	int ret;
 
-	if(size == 0) return 0;
-	if((pname == 0) || (value == 0)) return 0;
+	if (size == 0)
+		return 0;
+	if ((pname == NULL) || (value == NULL))
+		return 0;
 	spin_lock_irqsave(&prom_lock, flags);
 	ret = prom_nodeops->no_setprop(node, pname, value, size);
 	restore_current();
@@ -342,19 +306,3 @@ phandle prom_inst2pkg(int inst)
 	if (node == -1) return 0;
 	return node;
 }
-
-/* Return 'node' assigned to a particular prom 'path'
- * FIXME: Should work for v0 as well
- */
-phandle prom_pathtoinode(char *path)
-{
-	phandle node;
-	int inst;
-	
-	inst = prom_devopen (path);
-	if (inst == -1) return 0;
-	node = prom_inst2pkg (inst);
-	prom_devclose (inst);
-	if (node == -1) return 0;
-	return node;
-}
diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c
index 691be68932f..d9366004837 100644
--- a/arch/sparc/prom/tree_64.c
+++ b/arch/sparc/prom/tree_64.c
@@ -374,24 +374,6 @@ inline phandle prom_inst2pkg(int inst)
 	return node;
 }
 
-/* Return 'node' assigned to a particular prom 'path'
- * FIXME: Should work for v0 as well
- */
-phandle prom_pathtoinode(const char *path)
-{
-	phandle node;
-	int inst;
-
-	inst = prom_devopen (path);
-	if (inst == 0)
-		return 0;
-	node = prom_inst2pkg(inst);
-	prom_devclose(inst);
-	if (node == -1)
-		return 0;
-	return node;
-}
-
 int prom_ihandle2path(int handle, char *buffer, int bufsize)
 {
 	unsigned long args[7];
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 07ec8a865c1..e11b5fcb70e 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -329,6 +329,18 @@ endmenu  # Tilera-specific configuration
 
 menu "Bus options"
 
+config PCI
+	bool "PCI support"
+	default y
+	select PCI_DOMAINS
+	---help---
+	  Enable PCI root complex support, so PCIe endpoint devices can
+	  be attached to the Tile chip.  Many, but not all, PCI devices
+	  are supported under Tilera's root complex driver.
+
+config PCI_DOMAINS
+	bool
+
 config NO_IOMEM
 	def_bool !PCI
 
diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h
index c5741da4eea..14a3f8556ac 100644
--- a/arch/tile/include/asm/cacheflush.h
+++ b/arch/tile/include/asm/cacheflush.h
@@ -137,4 +137,56 @@ static inline void finv_buffer(void *buffer, size_t size)
 	mb_incoherent();
 }
 
+/*
+ * Flush & invalidate a VA range that is homed remotely on a single core,
+ * waiting until the memory controller holds the flushed values.
+ */
+static inline void finv_buffer_remote(void *buffer, size_t size)
+{
+	char *p;
+	int i;
+
+	/*
+	 * Flush and invalidate the buffer out of the local L1/L2
+	 * and request the home cache to flush and invalidate as well.
+	 */
+	__finv_buffer(buffer, size);
+
+	/*
+	 * Wait for the home cache to acknowledge that it has processed
+	 * all the flush-and-invalidate requests.  This does not mean
+	 * that the flushed data has reached the memory controller yet,
+	 * but it does mean the home cache is processing the flushes.
+	 */
+	__insn_mf();
+
+	/*
+	 * Issue a load to the last cache line, which can't complete
+	 * until all the previously-issued flushes to the same memory
+	 * controller have also completed.  If we weren't striping
+	 * memory, that one load would be sufficient, but since we may
+	 * be, we also need to back up to the last load issued to
+	 * another memory controller, which would be the point where
+	 * we crossed an 8KB boundary (the granularity of striping
+	 * across memory controllers).  Keep backing up and doing this
+	 * until we are before the beginning of the buffer, or have
+	 * hit all the controllers.
+	 */
+	for (i = 0, p = (char *)buffer + size - 1;
+	     i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer;
+	     ++i) {
+		const unsigned long STRIPE_WIDTH = 8192;
+
+		/* Force a load instruction to issue. */
+		*(volatile char *)p;
+
+		/* Jump to end of previous stripe. */
+		p -= STRIPE_WIDTH;
+		p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1));
+	}
+
+	/* Wait for the loads (and thus flushes) to have completed. */
+	__insn_mf();
+}
+
 #endif /* _ASM_TILE_CACHEFLUSH_H */
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
index ee43328713a..d3cbb9b14cb 100644
--- a/arch/tile/include/asm/io.h
+++ b/arch/tile/include/asm/io.h
@@ -55,9 +55,6 @@ extern void iounmap(volatile void __iomem *addr);
 #define ioremap_writethrough(physaddr, size)	ioremap(physaddr, size)
 #define ioremap_fullcache(physaddr, size)	ioremap(physaddr, size)
 
-void __iomem *ioport_map(unsigned long port, unsigned int len);
-extern inline void ioport_unmap(void __iomem *addr) {}
-
 #define mmiowb()
 
 /* Conversion between virtual and physical mappings.  */
@@ -189,12 +186,22 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
  * we never run, uses them unconditionally.
  */
 
-static inline int ioport_panic(void)
+static inline long ioport_panic(void)
 {
 	panic("inb/outb and friends do not exist on tile");
 	return 0;
 }
 
+static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+	return (void __iomem *) ioport_panic();
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+	ioport_panic();
+}
+
 static inline u8 inb(unsigned long addr)
 {
 	return ioport_panic();
diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h
deleted file mode 100644
index e853b0e2793..00000000000
--- a/arch/tile/include/asm/pci-bridge.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- */
-
-#ifndef _ASM_TILE_PCI_BRIDGE_H
-#define _ASM_TILE_PCI_BRIDGE_H
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-
-struct device_node;
-struct pci_controller;
-
-/*
- * pci_io_base returns the memory address at which you can access
- * the I/O space for PCI bus number `bus' (or NULL on error).
- */
-extern void __iomem *pci_bus_io_base(unsigned int bus);
-extern unsigned long pci_bus_io_base_phys(unsigned int bus);
-extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
-
-/* Allocate a new PCI host bridge structure */
-extern struct pci_controller *pcibios_alloc_controller(void);
-
-/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, unsigned long start,
-			      unsigned long end, int flags, char *name);
-
-/* Get the PCI host controller for a bus */
-extern struct pci_controller *pci_bus_to_hose(int bus);
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
-	int index;		/* PCI domain number */
-	struct pci_bus *root_bus;
-
-	int first_busno;
-	int last_busno;
-
-	int hv_cfg_fd[2];	/* config{0,1} fds for this PCIe controller */
-	int hv_mem_fd;		/* fd to Hypervisor for MMIO operations */
-
-	struct pci_ops *ops;
-
-	int irq_base;		/* Base IRQ from the Hypervisor	*/
-	int plx_gen1;		/* flag for PLX Gen 1 configuration */
-
-	/* Address ranges that are routed to this controller/bridge. */
-	struct resource mem_resources[3];
-};
-
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
-{
-	return bus->sysdata;
-}
-
-extern void setup_indirect_pci_nomap(struct pci_controller *hose,
-			       void __iomem *cfg_addr, void __iomem *cfg_data);
-extern void setup_indirect_pci(struct pci_controller *hose,
-			       u32 cfg_addr, u32 cfg_data);
-extern void setup_grackle(struct pci_controller *hose);
-
-extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
-
-/*
- *   The following code swizzles for exactly one bridge.  The routine
- *   common_swizzle below handles multiple bridges.  But there are a
- *   some boards that don't follow the PCI spec's suggestion so we
- *   break this piece out separately.
- */
-static inline unsigned char bridge_swizzle(unsigned char pin,
-		unsigned char idsel)
-{
-	return (((pin-1) + idsel) % 4) + 1;
-}
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those PPC systems that do not already have PCI
- * interrupts properly routed.
- */
-/* FIXME - double check this */
-#define PCI_IRQ_TABLE_LOOKUP ({ \
-	long _ctl_ = -1; \
-	if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
-		_ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
-	_ctl_; \
-})
-
-/*
- * Scan the buses below a given PCI host bridge and assign suitable
- * resources to all devices found.
- */
-extern int pciauto_bus_scan(struct pci_controller *, int);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	return (unsigned long)-1;
-}
-#endif
-
-#endif /* _ASM_TILE_PCI_BRIDGE_H */
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index b0c15da2d5d..c3fc458a0d3 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -15,7 +15,29 @@
 #ifndef _ASM_TILE_PCI_H
 #define _ASM_TILE_PCI_H
 
-#include <asm/pci-bridge.h>
+#include <linux/pci.h>
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	int index;		/* PCI domain number */
+	struct pci_bus *root_bus;
+
+	int first_busno;
+	int last_busno;
+
+	int hv_cfg_fd[2];	/* config{0,1} fds for this PCIe controller */
+	int hv_mem_fd;		/* fd to Hypervisor for MMIO operations */
+
+	struct pci_ops *ops;
+
+	int irq_base;		/* Base IRQ from the Hypervisor	*/
+	int plx_gen1;		/* flag for PLX Gen 1 configuration */
+
+	/* Address ranges that are routed to this controller/bridge. */
+	struct resource mem_resources[3];
+};
 
 /*
  * The hypervisor maps the entirety of CPA-space as bus addresses, so
@@ -24,56 +46,12 @@
  */
 #define PCI_DMA_BUS_IS_PHYS     1
 
-struct pci_controller *pci_bus_to_hose(int bus);
-unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
 int __init tile_pci_init(void);
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-void __devinit pcibios_fixup_bus(struct pci_bus *bus);
 
-int __devinit _tile_cfg_read(struct pci_controller *hose,
-				    int bus,
-				    int slot,
-				    int function,
-				    int offset,
-				    int size,
-				    u32 *val);
-int __devinit _tile_cfg_write(struct pci_controller *hose,
-				     int bus,
-				     int slot,
-				     int function,
-				     int offset,
-				     int size,
-				     u32 val);
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
 
-/*
- * These are used to to config reads and writes in the early stages of
- * setup before the driver infrastructure has been set up enough to be
- * able to do config reads and writes.
- */
-#define early_cfg_read(where, size, value) \
-	_tile_cfg_read(controller, \
-		       current_bus, \
-		       pci_slot, \
-		       pci_fn, \
-		       where, \
-		       size, \
-		       value)
-
-#define early_cfg_write(where, size, value) \
-	_tile_cfg_write(controller, \
-		       current_bus, \
-		       pci_slot, \
-		       pci_fn, \
-		       where, \
-		       size, \
-		       value)
-
-
-
-#define PCICFG_BYTE	1
-#define PCICFG_WORD	2
-#define PCICFG_DWORD	4
+void __devinit pcibios_fixup_bus(struct pci_bus *bus);
 
 #define	TILE_NUM_PCIE	2
 
@@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 }
 
 /*
- * I/O space is currently not supported.
+ * pcibios_assign_all_busses() tells whether or not the bus numbers
+ * should be reassigned, in case the BIOS didn't do it correctly, or
+ * in case we don't have a BIOS and we want to let Linux do it.
  */
+static inline int pcibios_assign_all_busses(void)
+{
+	return 1;
+}
 
-#define TILE_PCIE_LOWER_IO		0x0
-#define TILE_PCIE_UPPER_IO		0x10000
-#define TILE_PCIE_PCIE_IO_SIZE		0x0000FFFF
-
-#define _PAGE_NO_CACHE		0
-#define _PAGE_GUARDED		0
-
-
-#define pcibios_assign_all_busses()    pci_assign_all_buses
-extern int pci_assign_all_buses;
-
+/*
+ * No special bus mastering setup handling.
+ */
 static inline void pcibios_set_master(struct pci_dev *dev)
 {
-	/* No special bus mastering setup handling */
 }
 
 #define PCIBIOS_MIN_MEM		0
-#define PCIBIOS_MIN_IO		TILE_PCIE_LOWER_IO
+#define PCIBIOS_MIN_IO		0
 
 /*
  * This flag tells if the platform is TILEmpower that needs
  * special configuration for the PLX switch chip.
  */
-extern int blade_pci;
+extern int tile_plx_gen1;
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
 
 /* implement the pci_ DMA API in terms of the generic device dma_ one */
 #include <asm-generic/pci-dma-compat.h>
@@ -122,7 +100,4 @@ extern int blade_pci;
 /* generic pci stuff */
 #include <asm-generic/pci.h>
 
-/* Use any cpu for PCI. */
-#define cpumask_of_pcibus(bus) cpu_online_mask
-
 #endif /* _ASM_TILE_PCI_H */
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index 1747ff3946b..a9e7c876033 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -292,8 +292,18 @@ extern int kstack_hash;
 /* Are we using huge pages in the TLB for kernel data? */
 extern int kdata_huge;
 
+/* Support standard Linux prefetching. */
+#define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch(x)
 #define PREFETCH_STRIDE CHIP_L2_LINE_SIZE()
 
+/* Bring a value into the L1D, faulting the TLB if necessary. */
+#ifdef __tilegx__
+#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x))
+#else
+#define prefetch_L1(x) __insn_prefetch_L1((void *)(x))
+#endif
+
 #else /* __ASSEMBLY__ */
 
 /* Do some slow action (e.g. read a slow SPR). */
diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h
index c1ee1d61d44..81d92a45cd4 100644
--- a/arch/tile/include/asm/signal.h
+++ b/arch/tile/include/asm/signal.h
@@ -25,7 +25,7 @@
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 struct pt_regs;
-int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
+int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
 int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
 void do_signal(struct pt_regs *regs);
 #endif
diff --git a/arch/tile/include/hv/drv_xgbe_impl.h b/arch/tile/include/hv/drv_xgbe_impl.h
new file mode 100644
index 00000000000..3a73b2b4491
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_impl.h
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file drivers/xgbe/impl.h
+ * Implementation details for the NetIO library.
+ */
+
+#ifndef __DRV_XGBE_IMPL_H__
+#define __DRV_XGBE_IMPL_H__
+
+#include <hv/netio_errors.h>
+#include <hv/netio_intf.h>
+#include <hv/drv_xgbe_intf.h>
+
+
+/** How many groups we have (log2). */
+#define LOG2_NUM_GROUPS (12)
+/** How many groups we have. */
+#define NUM_GROUPS (1 << LOG2_NUM_GROUPS)
+
+/** Number of output requests we'll buffer per tile. */
+#define EPP_REQS_PER_TILE (32)
+
+/** Words used in an eDMA command without checksum acceleration. */
+#define EDMA_WDS_NO_CSUM      8
+/** Words used in an eDMA command with checksum acceleration. */
+#define EDMA_WDS_CSUM        10
+/** Total available words in the eDMA command FIFO. */
+#define EDMA_WDS_TOTAL      128
+
+
+/*
+ * FIXME: These definitions are internal and should have underscores!
+ * NOTE: The actual numeric values here are intentional and allow us to
+ * optimize the concept "if small ... else if large ... else ...", by
+ * checking for the low bit being set, and then for non-zero.
+ * These are used as array indices, so they must have the values (0, 1, 2)
+ * in some order.
+ */
+#define SIZE_SMALL (1)       /**< Small packet queue. */
+#define SIZE_LARGE (2)       /**< Large packet queue. */
+#define SIZE_JUMBO (0)       /**< Jumbo packet queue. */
+
+/** The number of "SIZE_xxx" values. */
+#define NETIO_NUM_SIZES 3
+
+
+/*
+ * Default numbers of packets for IPP drivers.  These values are chosen
+ * such that CIPP1 will not overflow its L2 cache.
+ */
+
+/** The default number of small packets. */
+#define NETIO_DEFAULT_SMALL_PACKETS 2750
+/** The default number of large packets. */
+#define NETIO_DEFAULT_LARGE_PACKETS 2500
+/** The default number of jumbo packets. */
+#define NETIO_DEFAULT_JUMBO_PACKETS 250
+
+
+/** Log2 of the size of a memory arena. */
+#define NETIO_ARENA_SHIFT      24      /* 16 MB */
+/** Size of a memory arena. */
+#define NETIO_ARENA_SIZE       (1 << NETIO_ARENA_SHIFT)
+
+
+/** A queue of packets.
+ *
+ * This structure partially defines a queue of packets waiting to be
+ * processed.  The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler.  The other part of the queue state, the read offset, is
+ * kept in user space, not in hypervisor space, so it is in a separate data
+ * structure.
+ *
+ * The read offset (__packet_receive_read in the user part of the queue
+ * structure) points to the next packet to be read. When the read offset is
+ * equal to the write offset, the queue is empty; therefore the queue must
+ * contain one more slot than the required maximum queue size.
+ *
+ * Here's an example of all 3 state variables and what they mean.  All
+ * pointers move left to right.
+ *
+ * @code
+ *   I   I   V   V   V   V   I   I   I   I
+ *   0   1   2   3   4   5   6   7   8   9  10
+ *           ^       ^       ^               ^
+ *           |               |               |
+ *           |               |               __last_packet_plus_one
+ *           |               __buffer_write
+ *           __packet_receive_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 packets (_last_packet_plus_one
+ * = 10).  The read pointer is at 2, and the write pointer is at 6; thus,
+ * there are valid, unread packets in slots 2, 3, 4, and 5.  The remaining
+ * slots are invalid (do not contain a packet).
+ */
+typedef struct {
+  /** Byte offset of the next notify packet to be written: zero for the first
+   *  packet on the queue, sizeof (netio_pkt_t) for the second packet on the
+   *  queue, etc. */
+  volatile uint32_t __packet_write;
+
+  /** Offset of the packet after the last valid packet (i.e., when any
+   *  pointer is incremented to this value, it wraps back to zero). */
+  uint32_t __last_packet_plus_one;
+}
+__netio_packet_queue_t;
+
+
+/** A queue of buffers.
+ *
+ * This structure partially defines a queue of empty buffers which have been
+ * obtained via requests to the IPP.  (The elements of the queue are packet
+ * handles, which are transformed into a full netio_pkt_t when the buffer is
+ * retrieved.)  The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler.  The other parts of the queue state, the read offset and
+ * requested write offset, are kept in user space, not in hypervisor space, so
+ * they are in a separate data structure.
+ *
+ * The read offset (__buffer_read in the user part of the queue structure)
+ * points to the next buffer to be read. When the read offset is equal to the
+ * write offset, the queue is empty; therefore the queue must contain one more
+ * slot than the required maximum queue size.
+ *
+ * The requested write offset (__buffer_requested_write in the user part of
+ * the queue structure) points to the slot which will hold the next buffer we
+ * request from the IPP, once we get around to sending such a request.  When
+ * the requested write offset is equal to the write offset, no requests for
+ * new buffers are outstanding; when the requested write offset is one greater
+ * than the read offset, no more requests may be sent.
+ *
+ * Note that, unlike the packet_queue, the buffer_queue places incoming
+ * buffers at decreasing addresses.  This makes the check for "is it time to
+ * wrap the buffer pointer" cheaper in the assembly code which receives new
+ * buffers, and means that the value which defines the queue size,
+ * __last_buffer, is different than in the packet queue.  Also, the offset
+ * used in the packet_queue is already scaled by the size of a packet; here we
+ * use unscaled slot indices for the offsets.  (These differences are
+ * historical, and in the future it's possible that the packet_queue will look
+ * more like this queue.)
+ *
+ * @code
+ * Here's an example of all 4 state variables and what they mean.  Remember:
+ * all pointers move right to left.
+ *
+ *   V   V   V   I   I   R   R   V   V   V
+ *   0   1   2   3   4   5   6   7   8   9
+ *           ^       ^       ^           ^
+ *           |       |       |           |
+ *           |       |       |           __last_buffer
+ *           |       |       __buffer_write
+ *           |       __buffer_requested_write
+ *           __buffer_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 buffers (_last_buffer = 9).
+ * The read pointer is at 2, and the write pointer is at 6; thus, there are
+ * valid, unread buffers in slots 2, 1, 0, 9, 8, and 7.  The requested write
+ * pointer is at 4; thus, requests have been made to the IPP for buffers which
+ * will be placed in slots 6 and 5 when they arrive.  Finally, the remaining
+ * slots are invalid (do not contain a buffer).
+ */
+typedef struct
+{
+  /** Ordinal number of the next buffer to be written: 0 for the first slot in
+   *  the queue, 1 for the second slot in the queue, etc. */
+  volatile uint32_t __buffer_write;
+
+  /** Ordinal number of the last buffer (i.e., when any pointer is decremented
+   *  below zero, it is reloaded with this value). */
+  uint32_t __last_buffer;
+}
+__netio_buffer_queue_t;
+
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+typedef struct __netio_queue_impl_t
+{
+  /** The queue of packets waiting to be received. */
+  __netio_packet_queue_t __packet_receive_queue;
+  /** The intr bit mask that IDs this device. */
+  unsigned int __intr_id;
+  /** Offset to queues of empty buffers, one per size. */
+  uint32_t __buffer_queue[NETIO_NUM_SIZES];
+  /** The address of the first EPP tile, or -1 if no EPP. */
+  /* ISSUE: Actually this is always "0" or "~0". */
+  uint32_t __epp_location;
+  /** The queue ID that this queue represents. */
+  unsigned int __queue_id;
+  /** Number of acknowledgements received. */
+  volatile uint32_t __acks_received;
+  /** Last completion number received for packet_sendv. */
+  volatile uint32_t __last_completion_rcv;
+  /** Number of packets allowed to be outstanding. */
+  uint32_t __max_outstanding;
+  /** First VA available for packets. */
+  void* __va_0;
+  /** First VA in second range available for packets. */
+  void* __va_1;
+  /** Padding to align the "__packets" field to the size of a netio_pkt_t. */
+  uint32_t __padding[3];
+  /** The packets themselves. */
+  netio_pkt_t __packets[0];
+}
+netio_queue_impl_t;
+
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+typedef struct __netio_queue_user_impl_t
+{
+  /** The next incoming packet to be read. */
+  uint32_t __packet_receive_read;
+  /** The next empty buffers to be read, one index per size. */
+  uint8_t __buffer_read[NETIO_NUM_SIZES];
+  /** Where the empty buffer we next request from the IPP will go, one index
+   * per size. */
+  uint8_t __buffer_requested_write[NETIO_NUM_SIZES];
+  /** PCIe interface flag. */
+  uint8_t __pcie;
+  /** Number of packets left to be received before we send a credit update. */
+  uint32_t __receive_credit_remaining;
+  /** Value placed in __receive_credit_remaining when it reaches zero. */
+  uint32_t __receive_credit_interval;
+  /** First fast I/O routine index. */
+  uint32_t __fastio_index;
+  /** Number of acknowledgements expected. */
+  uint32_t __acks_outstanding;
+  /** Last completion number requested. */
+  uint32_t __last_completion_req;
+  /** File descriptor for driver. */
+  int __fd;
+}
+netio_queue_user_impl_t;
+
+
+#define NETIO_GROUP_CHUNK_SIZE   64   /**< Max # groups in one IPP request */
+#define NETIO_BUCKET_CHUNK_SIZE  64   /**< Max # buckets in one IPP request */
+
+
+/** Internal structure used to convey packet send information to the
+ * hypervisor.  FIXME: Actually, it's not used for that anymore, but
+ * netio_packet_send() still uses it internally.
+ */
+typedef struct
+{
+  uint16_t flags;              /**< Packet flags (__NETIO_SEND_FLG_xxx) */
+  uint16_t transfer_size;      /**< Size of packet */
+  uint32_t va;                 /**< VA of start of packet */
+  __netio_pkt_handle_t handle; /**< Packet handle */
+  uint32_t csum0;              /**< First checksum word */
+  uint32_t csum1;              /**< Second checksum word */
+}
+__netio_send_cmd_t;
+
+
+/** Flags used in two contexts:
+ *  - As the "flags" member in the __netio_send_cmd_t, above; used only
+ *    for netio_pkt_send_{prepare,commit}.
+ *  - As part of the flags passed to the various send packet fast I/O calls.
+ */
+
+/** Need acknowledgement on this packet.  Note that some code in the
+ *  normal send_pkt fast I/O handler assumes that this is equal to 1. */
+#define __NETIO_SEND_FLG_ACK    0x1
+
+/** Do checksum on this packet.  (Only used with the __netio_send_cmd_t;
+ *  normal packet sends use a special fast I/O index to denote checksumming,
+ *  and multi-segment sends test the checksum descriptor.) */
+#define __NETIO_SEND_FLG_CSUM   0x2
+
+/** Get a completion on this packet.  Only used with multi-segment sends.  */
+#define __NETIO_SEND_FLG_COMPLETION 0x4
+
+/** Position of the number-of-extra-segments value in the flags word.
+    Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_XSEG_SHIFT 3
+
+/** Width of the number-of-extra-segments value in the flags word. */
+#define __NETIO_SEND_FLG_XSEG_WIDTH 2
+
+#endif /* __DRV_XGBE_IMPL_H__ */
diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h
new file mode 100644
index 00000000000..146e47d5334
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_intf.h
@@ -0,0 +1,615 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * @file drv_xgbe_intf.h
+ * Interface to the hypervisor XGBE driver.
+ */
+
+#ifndef __DRV_XGBE_INTF_H__
+#define __DRV_XGBE_INTF_H__
+
+/**
+ * An object for forwarding VAs and PAs to the hypervisor.
+ * @ingroup types
+ *
+ * This allows the supervisor to specify a number of areas of memory to
+ * store packet buffers.
+ */
+typedef struct
+{
+  /** The physical address of the memory. */
+  HV_PhysAddr pa;
+  /** Page table entry for the memory.  This is only used to derive the
+   *  memory's caching mode; the PA bits are ignored. */
+  HV_PTE pte;
+  /** The virtual address of the memory. */
+  HV_VirtAddr va;
+  /** Size (in bytes) of the memory area. */
+  int size;
+
+}
+netio_ipp_address_t;
+
+/** The various pread/pwrite offsets into the hypervisor-level driver.
+ * @ingroup types
+ */
+typedef enum
+{
+  /** Inform the Linux driver of the address of the NetIO arena memory.
+   *  This offset is actually only used to convey information from netio
+   *  to the Linux driver; it never makes it from there to the hypervisor.
+   *  Write-only; takes a uint32_t specifying the VA address. */
+  NETIO_FIXED_ADDR               = 0x5000000000000000ULL,
+
+  /** Inform the Linux driver of the size of the NetIO arena memory.
+   *  This offset is actually only used to convey information from netio
+   *  to the Linux driver; it never makes it from there to the hypervisor.
+   *  Write-only; takes a uint32_t specifying the VA size. */
+  NETIO_FIXED_SIZE               = 0x5100000000000000ULL,
+
+  /** Register current tile with IPP.  Write then read: write, takes a
+   *  netio_input_config_t, read returns a pointer to a netio_queue_impl_t. */
+  NETIO_IPP_INPUT_REGISTER_OFF   = 0x6000000000000000ULL,
+
+  /** Unregister current tile from IPP.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_UNREGISTER_OFF = 0x6100000000000000ULL,
+
+  /** Start packets flowing.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_INIT_OFF       = 0x6200000000000000ULL,
+
+  /** Stop packets flowing.  Write-only, takes a dummy argument. */
+  NETIO_IPP_INPUT_UNINIT_OFF     = 0x6300000000000000ULL,
+
+  /** Configure group (typically we group on VLAN).  Write-only: takes an
+   *  array of netio_group_t's, low 24 bits of the offset is the base group
+   *  number times the size of a netio_group_t. */
+  NETIO_IPP_INPUT_GROUP_CFG_OFF  = 0x6400000000000000ULL,
+
+  /** Configure bucket.  Write-only: takes an array of netio_bucket_t's, low
+   *  24 bits of the offset is the base bucket number times the size of a
+   *  netio_bucket_t. */
+  NETIO_IPP_INPUT_BUCKET_CFG_OFF = 0x6500000000000000ULL,
+
+  /** Get/set a parameter.  Read or write: read or write data is the parameter
+   *  value, low 32 bits of the offset is a __netio_getset_offset_t. */
+  NETIO_IPP_PARAM_OFF            = 0x6600000000000000ULL,
+
+  /** Get fast I/O index.  Read-only; returns a 4-byte base index value. */
+  NETIO_IPP_GET_FASTIO_OFF       = 0x6700000000000000ULL,
+
+  /** Configure hijack IP address.  Packets with this IPv4 dest address
+   *  go to bucket NETIO_NUM_BUCKETS - 1.  Write-only: takes an IP address
+   *  in some standard form.  FIXME: Define the form! */
+  NETIO_IPP_INPUT_HIJACK_CFG_OFF  = 0x6800000000000000ULL,
+
+  /**
+   * Offsets beyond this point are reserved for the supervisor (although that
+   * enforcement must be done by the supervisor driver itself).
+   */
+  NETIO_IPP_USER_MAX_OFF         = 0x6FFFFFFFFFFFFFFFULL,
+
+  /** Register I/O memory.  Write-only, takes a netio_ipp_address_t. */
+  NETIO_IPP_IOMEM_REGISTER_OFF   = 0x7000000000000000ULL,
+
+  /** Unregister I/O memory.  Write-only, takes a netio_ipp_address_t. */
+  NETIO_IPP_IOMEM_UNREGISTER_OFF = 0x7100000000000000ULL,
+
+  /* Offsets greater than 0x7FFFFFFF can't be used directly from Linux
+   * userspace code due to limitations in the pread/pwrite syscalls. */
+
+  /** Drain LIPP buffers. */
+  NETIO_IPP_DRAIN_OFF              = 0xFA00000000000000ULL,
+
+  /** Supply a netio_ipp_address_t to be used as shared memory for the
+   *  LEPP command queue. */
+  NETIO_EPP_SHM_OFF              = 0xFB00000000000000ULL,
+
+  /* 0xFC... is currently unused. */
+
+  /** Stop IPP/EPP tiles.  Write-only, takes a dummy argument.  */
+  NETIO_IPP_STOP_SHIM_OFF        = 0xFD00000000000000ULL,
+
+  /** Start IPP/EPP tiles.  Write-only, takes a dummy argument.  */
+  NETIO_IPP_START_SHIM_OFF       = 0xFE00000000000000ULL,
+
+  /** Supply packet arena.  Write-only, takes an array of
+    * netio_ipp_address_t values. */
+  NETIO_IPP_ADDRESS_OFF          = 0xFF00000000000000ULL,
+} netio_hv_offset_t;
+
+/** Extract the base offset from an offset */
+#define NETIO_BASE_OFFSET(off)    ((off) & 0xFF00000000000000ULL)
+/** Extract the local offset from an offset */
+#define NETIO_LOCAL_OFFSET(off)   ((off) & 0x00FFFFFFFFFFFFFFULL)
+
+
+/**
+ * Get/set offset.
+ */
+typedef union
+{
+  struct
+  {
+    uint64_t addr:48;        /**< Class-specific address */
+    unsigned int class:8;    /**< Class (e.g., NETIO_PARAM) */
+    unsigned int opcode:8;   /**< High 8 bits of NETIO_IPP_PARAM_OFF */
+  }
+  bits;                      /**< Bitfields */
+  uint64_t word;             /**< Aggregated value to use as the offset */
+}
+__netio_getset_offset_t;
+
+/**
+ * Fast I/O index offsets (must be contiguous).
+ */
+typedef enum
+{
+  NETIO_FASTIO_ALLOCATE         = 0, /**< Get empty packet buffer */
+  NETIO_FASTIO_FREE_BUFFER      = 1, /**< Give buffer back to IPP */
+  NETIO_FASTIO_RETURN_CREDITS   = 2, /**< Give credits to IPP */
+  NETIO_FASTIO_SEND_PKT_NOCK    = 3, /**< Send a packet, no checksum */
+  NETIO_FASTIO_SEND_PKT_CK      = 4, /**< Send a packet, with checksum */
+  NETIO_FASTIO_SEND_PKT_VEC     = 5, /**< Send a vector of packets */
+  NETIO_FASTIO_SENDV_PKT        = 6, /**< Sendv one packet */
+  NETIO_FASTIO_NUM_INDEX        = 7, /**< Total number of fast I/O indices */
+} netio_fastio_index_t;
+
+/** 3-word return type for Fast I/O call. */
+typedef struct
+{
+  int err;            /**< Error code. */
+  uint32_t val0;      /**< Value.  Meaning depends upon the specific call. */
+  uint32_t val1;      /**< Value.  Meaning depends upon the specific call. */
+} netio_fastio_rv3_t;
+
+/** 0-argument fast I/O call */
+int __netio_fastio0(uint32_t fastio_index);
+/** 1-argument fast I/O call */
+int __netio_fastio1(uint32_t fastio_index, uint32_t arg0);
+/** 3-argument fast I/O call, 2-word return value */
+netio_fastio_rv3_t __netio_fastio3_rv3(uint32_t fastio_index, uint32_t arg0,
+                                       uint32_t arg1, uint32_t arg2);
+/** 4-argument fast I/O call */
+int __netio_fastio4(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3);
+/** 6-argument fast I/O call */
+int __netio_fastio6(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5);
+/** 9-argument fast I/O call */
+int __netio_fastio9(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+                    uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5,
+                    uint32_t arg6, uint32_t arg7, uint32_t arg8);
+
+/** Allocate an empty packet.
+ * @param fastio_index Fast I/O index.
+ * @param size Size of the packet to allocate.
+ */
+#define __netio_fastio_allocate(fastio_index, size) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_ALLOCATE, size)
+
+/** Free a buffer.
+ * @param fastio_index Fast I/O index.
+ * @param handle Handle for the packet to free.
+ */
+#define __netio_fastio_free_buffer(fastio_index, handle) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_FREE_BUFFER, handle)
+
+/** Increment our receive credits.
+ * @param fastio_index Fast I/O index.
+ * @param credits Number of credits to add.
+ */
+#define __netio_fastio_return_credits(fastio_index, credits) \
+  __netio_fastio1((fastio_index) + NETIO_FASTIO_RETURN_CREDITS, credits)
+
+/** Send packet, no checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ */
+#define __netio_fastio_send_pkt_nock(fastio_index, ackflag, size, va, handle) \
+  __netio_fastio4((fastio_index) + NETIO_FASTIO_SEND_PKT_NOCK, ackflag, \
+                  size, va, handle)
+
+/** Send packet, calculate checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ * @param csum0 Shim checksum header.
+ * @param csum1 Checksum seed.
+ */
+#define __netio_fastio_send_pkt_ck(fastio_index, ackflag, size, va, handle, \
+                                   csum0, csum1) \
+  __netio_fastio6((fastio_index) + NETIO_FASTIO_SEND_PKT_CK, ackflag, \
+                  size, va, handle, csum0, csum1)
+
+
+/** Format for the "csum0" argument to the __netio_fastio_send routines
+ * and LEPP.  Note that this is currently exactly identical to the
+ * ShimProtocolOffloadHeader.
+ */
+typedef union
+{
+  struct
+  {
+    unsigned int start_byte:7;       /**< The first byte to be checksummed */
+    unsigned int count:14;           /**< Number of bytes to be checksummed. */
+    unsigned int destination_byte:7; /**< The byte to write the checksum to. */
+    unsigned int reserved:4;         /**< Reserved. */
+  } bits;                            /**< Decomposed method of access. */
+  unsigned int word;                 /**< To send out the IDN. */
+} __netio_checksum_header_t;
+
+
+/** Sendv packet with 1 or 2 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ *        1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment, if 2 segments.
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ *        segment, if 2 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_1_2(fastio_index, flags, confno, csum0, \
+                                     va_F, va_L, len_F_L) \
+  __netio_fastio6((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+                  csum0, va_F, va_L, len_F_L)
+
+/** Send packet on PCIe interface.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; Hard wired 0, not needed for PCIe.
+ * @param va_F Virtual address of the packet buffer.
+ * @param va_L Virtual address of last segment, if 2 segments. Hard wired 0.
+ * @param len_F_L Length of the packet buffer in low 16 bits.
+ */
+#define __netio_fastio_send_pcie_pkt(fastio_index, flags, confno, csum0, \
+                                     va_F, va_L, len_F_L) \
+  __netio_fastio6((fastio_index) + PCIE_FASTIO_SENDV_PKT, flags, confno, \
+                  csum0, va_F, va_L, len_F_L)
+
+/** Sendv packet with 3 or 4 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ *        1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment (third segment if 3 segments,
+ *        fourth segment if 4 segments).
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ *        segment in high 16 bits.
+ * @param va_M0 Virtual address of "middle 0" segment; this segment is sent
+ *        second when there are three segments, and third if there are four.
+ * @param va_M1 Virtual address of "middle 1" segment; this segment is sent
+ *        second when there are four segments.
+ * @param len_M0_M1 Length of middle 0 segment in low 16 bits; length of middle
+ *        1 segment, if 4 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_3_4(fastio_index, flags, confno, csum0, va_F, \
+                                     va_L, len_F_L, va_M0, va_M1, len_M0_M1) \
+  __netio_fastio9((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+                  csum0, va_F, va_L, len_F_L, va_M0, va_M1, len_M0_M1)
+
+/** Send vector of packets.
+ * @param fastio_index Fast I/O index.
+ * @param seqno Number of packets transmitted so far on this interface;
+ *        used to decide which packets should be acknowledged.
+ * @param nentries Number of entries in vector.
+ * @param va Virtual address of start of vector entry array.
+ * @return 3-word netio_fastio_rv3_t structure.  The structure's err member
+ *         is an error code, or zero if no error.  The val0 member is the
+ *         updated value of seqno; it has been incremented by 1 for each
+ *         packet sent.  That increment may be less than nentries if an
+ *         error occured, or if some of the entries in the vector contain
+ *         handles equal to NETIO_PKT_HANDLE_NONE.  The val1 member is the
+ *         updated value of nentries; it has been decremented by 1 for each
+ *         vector entry processed.  Again, that decrement may be less than
+ *         nentries (leaving the returned value positive) if an error
+ *         occurred.
+ */
+#define __netio_fastio_send_pkt_vec(fastio_index, seqno, nentries, va) \
+  __netio_fastio3_rv3((fastio_index) + NETIO_FASTIO_SEND_PKT_VEC, seqno, \
+                      nentries, va)
+
+
+/** An egress DMA command for LEPP. */
+typedef struct
+{
+  /** Is this a TSO transfer?
+   *
+   * NOTE: This field is always 0, to distinguish it from
+   * lepp_tso_cmd_t.  It must come first!
+   */
+  uint8_t tso               : 1;
+
+  /** Unused padding bits. */
+  uint8_t _unused           : 3;
+
+  /** Should this packet be sent directly from caches instead of DRAM,
+   * using hash-for-home to locate the packet data?
+   */
+  uint8_t hash_for_home     : 1;
+
+  /** Should we compute a checksum? */
+  uint8_t compute_checksum  : 1;
+
+  /** Is this the final buffer for this packet?
+   *
+   * A single packet can be split over several input buffers (a "gather"
+   * operation).  This flag indicates that this is the last buffer
+   * in a packet.
+   */
+  uint8_t end_of_packet     : 1;
+
+  /** Should LEPP advance 'comp_busy' when this DMA is fully finished? */
+  uint8_t send_completion   : 1;
+
+  /** High bits of Client Physical Address of the start of the buffer
+   *  to be egressed.
+   *
+   *  NOTE: Only 6 bits are actually needed here, as CPAs are
+   *  currently 38 bits.  So two bits could be scavenged from this.
+   */
+  uint8_t cpa_hi;
+
+  /** The number of bytes to be egressed. */
+  uint16_t length;
+
+  /** Low 32 bits of Client Physical Address of the start of the buffer
+   *  to be egressed.
+   */
+  uint32_t cpa_lo;
+
+  /** Checksum information (only used if 'compute_checksum'). */
+  __netio_checksum_header_t checksum_data;
+
+} lepp_cmd_t;
+
+
+/** A chunk of physical memory for a TSO egress. */
+typedef struct
+{
+  /** The low bits of the CPA. */
+  uint32_t cpa_lo;
+  /** The high bits of the CPA. */
+  uint16_t cpa_hi		: 15;
+  /** Should this packet be sent directly from caches instead of DRAM,
+   *  using hash-for-home to locate the packet data?
+   */
+  uint16_t hash_for_home	: 1;
+  /** The length in bytes. */
+  uint16_t length;
+} lepp_frag_t;
+
+
+/** An LEPP command that handles TSO. */
+typedef struct
+{
+  /** Is this a TSO transfer?
+   *
+   *  NOTE: This field is always 1, to distinguish it from
+   *  lepp_cmd_t.  It must come first!
+   */
+  uint8_t tso             : 1;
+
+  /** Unused padding bits. */
+  uint8_t _unused         : 7;
+
+  /** Size of the header[] array in bytes.  It must be in the range
+   *  [40, 127], which are the smallest header for a TCP packet over
+   *  Ethernet and the maximum possible prepend size supported by
+   *  hardware, respectively.  Note that the array storage must be
+   *  padded out to a multiple of four bytes so that the following
+   *  LEPP command is aligned properly.
+   */
+  uint8_t header_size;
+
+  /** Byte offset of the IP header in header[]. */
+  uint8_t ip_offset;
+
+  /** Byte offset of the TCP header in header[]. */
+  uint8_t tcp_offset;
+
+  /** The number of bytes to use for the payload of each packet,
+   *  except of course the last one, which may not have enough bytes.
+   *  This means that each Ethernet packet except the last will have a
+   *  size of header_size + payload_size.
+   */
+  uint16_t payload_size;
+
+  /** The length of the 'frags' array that follows this struct. */
+  uint16_t num_frags;
+
+  /** The actual frags. */
+  lepp_frag_t frags[0 /* Variable-sized; num_frags entries. */];
+
+  /*
+   * The packet header template logically follows frags[],
+   * but you can't declare that in C.
+   *
+   * uint32_t header[header_size_in_words_rounded_up];
+   */
+
+} lepp_tso_cmd_t;
+
+
+/** An LEPP completion ring entry. */
+typedef void* lepp_comp_t;
+
+
+/** Maximum number of frags for one TSO command.  This is adapted from
+ *  linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for
+ *  our page size of exactly 65536.  We add one for a "body" fragment.
+ */
+#define LEPP_MAX_FRAGS (65536 / HV_PAGE_SIZE_SMALL + 2 + 1)
+
+/** Total number of bytes needed for an lepp_tso_cmd_t. */
+#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \
+  (sizeof(lepp_tso_cmd_t) + \
+   (num_frags) * sizeof(lepp_frag_t) + \
+   (((header_size) + 3) & -4))
+
+/** The size of the lepp "cmd" queue. */
+#define LEPP_CMD_QUEUE_BYTES \
+ (((CHIP_L2_CACHE_SIZE() - 2 * CHIP_L2_LINE_SIZE()) / \
+  (sizeof(lepp_cmd_t) + sizeof(lepp_comp_t))) * sizeof(lepp_cmd_t))
+
+/** The largest possible command that can go in lepp_queue_t::cmds[]. */
+#define LEPP_MAX_CMD_SIZE LEPP_TSO_CMD_SIZE(LEPP_MAX_FRAGS, 128)
+
+/** The largest possible value of lepp_queue_t::cmd_{head, tail} (inclusive).
+ */
+#define LEPP_CMD_LIMIT \
+  (LEPP_CMD_QUEUE_BYTES - LEPP_MAX_CMD_SIZE)
+
+/** The maximum number of completions in an LEPP queue. */
+#define LEPP_COMP_QUEUE_SIZE \
+  ((LEPP_CMD_LIMIT + sizeof(lepp_cmd_t) - 1) / sizeof(lepp_cmd_t))
+
+/** Increment an index modulo the queue size. */
+#define LEPP_QINC(var) \
+  (var = __insn_mnz(var - (LEPP_COMP_QUEUE_SIZE - 1), var + 1))
+
+/** A queue used to convey egress commands from the client to LEPP. */
+typedef struct
+{
+  /** Index of first completion not yet processed by user code.
+   *  If this is equal to comp_busy, there are no such completions.
+   *
+   *  NOTE: This is only read/written by the user.
+   */
+  unsigned int comp_head;
+
+  /** Index of first completion record not yet completed.
+   *  If this is equal to comp_tail, there are no such completions.
+   *  This index gets advanced (modulo LEPP_QUEUE_SIZE) whenever
+   *  a command with the 'completion' bit set is finished.
+   *
+   *  NOTE: This is only written by LEPP, only read by the user.
+   */
+  volatile unsigned int comp_busy;
+
+  /** Index of the first empty slot in the completion ring.
+   *  Entries from this up to but not including comp_head (in ring order)
+   *  can be filled in with completion data.
+   *
+   *  NOTE: This is only read/written by the user.
+   */
+  unsigned int comp_tail;
+
+  /** Byte index of first command enqueued for LEPP but not yet processed.
+   *
+   *  This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+   *
+   *  NOTE: LEPP advances this counter as soon as it no longer needs
+   *  the cmds[] storage for this entry, but the transfer is not actually
+   *  complete (i.e. the buffer pointed to by the command is no longer
+   *  needed) until comp_busy advances.
+   *
+   *  If this is equal to cmd_tail, the ring is empty.
+   *
+   *  NOTE: This is only written by LEPP, only read by the user.
+   */
+  volatile unsigned int cmd_head;
+
+  /** Byte index of first empty slot in the command ring.  This field can
+   *  be incremented up to but not equal to cmd_head (because that would
+   *  mean the ring is empty).
+   *
+   *  This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+   *
+   *  NOTE: This is read/written by the user, only read by LEPP.
+   */
+  volatile unsigned int cmd_tail;
+
+  /** A ring of variable-sized egress DMA commands.
+   *
+   *  NOTE: Only written by the user, only read by LEPP.
+   */
+  char cmds[LEPP_CMD_QUEUE_BYTES]
+    __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+
+  /** A ring of user completion data.
+   *  NOTE: Only read/written by the user.
+   */
+  lepp_comp_t comps[LEPP_COMP_QUEUE_SIZE]
+    __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+} lepp_queue_t;
+
+
+/** An internal helper function for determining the number of entries
+ *  available in a ring buffer, given that there is one sentinel.
+ */
+static inline unsigned int
+_lepp_num_free_slots(unsigned int head, unsigned int tail)
+{
+  /*
+   * One entry is reserved for use as a sentinel, to distinguish
+   * "empty" from "full".  So we compute
+   * (head - tail - 1) % LEPP_QUEUE_SIZE, but without using a slow % operation.
+   */
+  return (head - tail - 1) + ((head <= tail) ? LEPP_COMP_QUEUE_SIZE : 0);
+}
+
+
+/** Returns how many new comp entries can be enqueued. */
+static inline unsigned int
+lepp_num_free_comp_slots(const lepp_queue_t* q)
+{
+  return _lepp_num_free_slots(q->comp_head, q->comp_tail);
+}
+
+static inline int
+lepp_qsub(int v1, int v2)
+{
+  int delta = v1 - v2;
+  return delta + ((delta >> 31) & LEPP_COMP_QUEUE_SIZE);
+}
+
+
+/** FIXME: Check this from linux, via a new "pwrite()" call. */
+#define LIPP_VERSION 1
+
+
+/** We use exactly two bytes of alignment padding. */
+#define LIPP_PACKET_PADDING 2
+
+/** The minimum size of a "small" buffer (including the padding). */
+#define LIPP_SMALL_PACKET_SIZE 128
+
+/*
+ * NOTE: The following two values should total to less than around
+ * 13582, to keep the total size used for "lipp_state_t" below 64K.
+ */
+
+/** The maximum number of "small" buffers.
+ *  This is enough for 53 network cpus with 128 credits.  Note that
+ *  if these are exhausted, we will fall back to using large buffers.
+ */
+#define LIPP_SMALL_BUFFERS 6785
+
+/** The maximum number of "large" buffers.
+ *  This is enough for 53 network cpus with 128 credits.
+ */
+#define LIPP_LARGE_BUFFERS 6785
+
+#endif /* __DRV_XGBE_INTF_H__ */
diff --git a/arch/tile/include/hv/netio_errors.h b/arch/tile/include/hv/netio_errors.h
new file mode 100644
index 00000000000..e1591bff61b
--- /dev/null
+++ b/arch/tile/include/hv/netio_errors.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * Error codes returned from NetIO routines.
+ */
+
+#ifndef __NETIO_ERRORS_H__
+#define __NETIO_ERRORS_H__
+
+/**
+ * @addtogroup error
+ *
+ * @brief The error codes returned by NetIO functions.
+ *
+ * NetIO functions return 0 (defined as ::NETIO_NO_ERROR) on success, and
+ * a negative value if an error occurs.
+ *
+ * In cases where a NetIO function failed due to a error reported by
+ * system libraries, the error code will be the negation of the
+ * system errno at the time of failure.  The @ref netio_strerror()
+ * function will deliver error strings for both NetIO and system error
+ * codes.
+ *
+ * @{
+ */
+
+/** The set of all NetIO errors. */
+typedef enum
+{
+  /** Operation successfully completed. */
+  NETIO_NO_ERROR        = 0,
+
+  /** A packet was successfully retrieved from an input queue. */
+  NETIO_PKT             = 0,
+
+  /** Largest NetIO error number. */
+  NETIO_ERR_MAX         = -701,
+
+  /** The tile is not registered with the IPP. */
+  NETIO_NOT_REGISTERED  = -701,
+
+  /** No packet was available to retrieve from the input queue. */
+  NETIO_NOPKT           = -702,
+
+  /** The requested function is not implemented. */
+  NETIO_NOT_IMPLEMENTED = -703,
+
+  /** On a registration operation, the target queue already has the maximum
+   *  number of tiles registered for it, and no more may be added.  On a
+   *  packet send operation, the output queue is full and nothing more can
+   *  be queued until some of the queued packets are actually transmitted. */
+  NETIO_QUEUE_FULL      = -704,
+
+  /** The calling process or thread is not bound to exactly one CPU. */
+  NETIO_BAD_AFFINITY    = -705,
+
+  /** Cannot allocate memory on requested controllers. */
+  NETIO_CANNOT_HOME     = -706,
+
+  /** On a registration operation, the IPP specified is not configured
+   *  to support the options requested; for instance, the application
+   *  wants a specific type of tagged headers which the configured IPP
+   *  doesn't support.  Or, the supplied configuration information is
+   *  not self-consistent, or is out of range; for instance, specifying
+   *  both NETIO_RECV and NETIO_NO_RECV, or asking for more than
+   *  NETIO_MAX_SEND_BUFFERS to be preallocated.  On a VLAN or bucket
+   *  configure operation, the number of items, or the base item, was
+   *  out of range.
+   */
+  NETIO_BAD_CONFIG      = -707,
+
+  /** Too many tiles have registered to transmit packets. */
+  NETIO_TOOMANY_XMIT    = -708,
+
+  /** Packet transmission was attempted on a queue which was registered
+      with transmit disabled. */
+  NETIO_UNREG_XMIT      = -709,
+
+  /** This tile is already registered with the IPP. */
+  NETIO_ALREADY_REGISTERED = -710,
+
+  /** The Ethernet link is down. The application should try again later. */
+  NETIO_LINK_DOWN       = -711,
+
+  /** An invalid memory buffer has been specified.  This may be an unmapped
+   * virtual address, or one which does not meet alignment requirements.
+   * For netio_input_register(), this error may be returned when multiple
+   * processes specify different memory regions to be used for NetIO
+   * buffers.  That can happen if these processes specify explicit memory
+   * regions with the ::NETIO_FIXED_BUFFER_VA flag, or if tmc_cmem_init()
+   * has not been called by a common ancestor of the processes.
+   */
+  NETIO_FAULT           = -712,
+
+  /** Cannot combine user-managed shared memory and cache coherence. */
+  NETIO_BAD_CACHE_CONFIG = -713,
+
+  /** Smallest NetIO error number. */
+  NETIO_ERR_MIN         = -713,
+
+#ifndef __DOXYGEN__
+  /** Used internally to mean that no response is needed; never returned to
+   *  an application. */
+  NETIO_NO_RESPONSE     = 1
+#endif
+} netio_error_t;
+
+/** @} */
+
+#endif /* __NETIO_ERRORS_H__ */
diff --git a/arch/tile/include/hv/netio_intf.h b/arch/tile/include/hv/netio_intf.h
new file mode 100644
index 00000000000..8d20972aba2
--- /dev/null
+++ b/arch/tile/include/hv/netio_intf.h
@@ -0,0 +1,2975 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+/**
+ * NetIO interface structures and macros.
+ */
+
+#ifndef __NETIO_INTF_H__
+#define __NETIO_INTF_H__
+
+#include <hv/netio_errors.h>
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__)
+#include <assert.h>
+#define netio_assert assert  /**< Enable assertions from macros */
+#else
+#define netio_assert(...) ((void)(0))  /**< Disable assertions from macros */
+#endif
+
+/*
+ * If none of these symbols are defined, we're building libnetio in an
+ * environment where we have pthreads, so we'll enable locking.
+ */
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__) && \
+    !defined(__NEWLIB__)
+#define _NETIO_PTHREAD       /**< Include a mutex in netio_queue_t below */
+
+/*
+ * If NETIO_UNLOCKED is defined, we don't do use per-cpu locks on
+ * per-packet NetIO operations.  We still do pthread locking on things
+ * like netio_input_register, though.  This is used for building
+ * libnetio_unlocked.
+ */
+#ifndef NETIO_UNLOCKED
+
+/* Avoid PLT overhead by using our own inlined per-cpu lock. */
+#include <sched.h>
+typedef int _netio_percpu_mutex_t;
+
+static __inline int
+_netio_percpu_mutex_init(_netio_percpu_mutex_t* lock)
+{
+  *lock = 0;
+  return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_lock(_netio_percpu_mutex_t* lock)
+{
+  while (__builtin_expect(__insn_tns(lock), 0))
+    sched_yield();
+  return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_unlock(_netio_percpu_mutex_t* lock)
+{
+  *lock = 0;
+  return 0;
+}
+
+#else /* NETIO_UNLOCKED */
+
+/* Don't do any locking for per-packet NetIO operations. */
+typedef int _netio_percpu_mutex_t;
+#define _netio_percpu_mutex_init(L)
+#define _netio_percpu_mutex_lock(L)
+#define _netio_percpu_mutex_unlock(L)
+
+#endif /* NETIO_UNLOCKED */
+#endif /* !__HV__, !__BOGUX, !__KERNEL__, !__NEWLIB__ */
+
+/** How many tiles can register for a given queue.
+ *  @ingroup setup */
+#define NETIO_MAX_TILES_PER_QUEUE  64
+
+
+/** Largest permissible queue identifier.
+ *  @ingroup setup  */
+#define NETIO_MAX_QUEUE_ID        255
+
+
+#ifndef __DOXYGEN__
+
+/* Metadata packet checksum/ethertype flags. */
+
+/** The L4 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L4_CSUM_SHIFT           0
+#define _NETIO_PKT_NO_L4_CSUM_RMASK           1
+#define _NETIO_PKT_NO_L4_CSUM_MASK \
+         (_NETIO_PKT_NO_L4_CSUM_RMASK << _NETIO_PKT_NO_L4_CSUM_SHIFT)
+
+/** The L3 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L3_CSUM_SHIFT           1
+#define _NETIO_PKT_NO_L3_CSUM_RMASK           1
+#define _NETIO_PKT_NO_L3_CSUM_MASK \
+         (_NETIO_PKT_NO_L3_CSUM_RMASK << _NETIO_PKT_NO_L3_CSUM_SHIFT)
+
+/** The L3 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L3_CSUM_SHIFT          2
+#define _NETIO_PKT_BAD_L3_CSUM_RMASK          1
+#define _NETIO_PKT_BAD_L3_CSUM_MASK \
+         (_NETIO_PKT_BAD_L3_CSUM_RMASK << _NETIO_PKT_BAD_L3_CSUM_SHIFT)
+
+/** The Ethernet packet type is unrecognized. */
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT    3
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_RMASK    1
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_MASK \
+         (_NETIO_PKT_TYPE_UNRECOGNIZED_RMASK << \
+          _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT)
+
+/* Metadata packet type flags. */
+
+/** Where the packet type bits are; this field is the index into
+ *  _netio_pkt_info. */
+#define _NETIO_PKT_TYPE_SHIFT        4
+#define _NETIO_PKT_TYPE_RMASK        0x3F
+
+/** How many VLAN tags the packet has, and, if we have two, which one we
+ *  actually grouped on.  A VLAN within a proprietary (Marvell or Broadcom)
+ *  tag is counted here. */
+#define _NETIO_PKT_VLAN_SHIFT        4
+#define _NETIO_PKT_VLAN_RMASK        0x3
+#define _NETIO_PKT_VLAN_MASK \
+         (_NETIO_PKT_VLAN_RMASK << _NETIO_PKT_VLAN_SHIFT)
+#define _NETIO_PKT_VLAN_NONE         0   /* No VLAN tag. */
+#define _NETIO_PKT_VLAN_ONE          1   /* One VLAN tag. */
+#define _NETIO_PKT_VLAN_TWO_OUTER    2   /* Two VLAN tags, outer one used. */
+#define _NETIO_PKT_VLAN_TWO_INNER    3   /* Two VLAN tags, inner one used. */
+
+/** Which proprietary tags the packet has. */
+#define _NETIO_PKT_TAG_SHIFT         6
+#define _NETIO_PKT_TAG_RMASK         0x3
+#define _NETIO_PKT_TAG_MASK \
+          (_NETIO_PKT_TAG_RMASK << _NETIO_PKT_TAG_SHIFT)
+#define _NETIO_PKT_TAG_NONE          0   /* No proprietary tags. */
+#define _NETIO_PKT_TAG_MRVL          1   /* Marvell HyperG.Stack tags. */
+#define _NETIO_PKT_TAG_MRVL_EXT      2   /* HyperG.Stack extended tags. */
+#define _NETIO_PKT_TAG_BRCM          3   /* Broadcom HiGig tags. */
+
+/** Whether a packet has an LLC + SNAP header. */
+#define _NETIO_PKT_SNAP_SHIFT        8
+#define _NETIO_PKT_SNAP_RMASK        0x1
+#define _NETIO_PKT_SNAP_MASK \
+          (_NETIO_PKT_SNAP_RMASK << _NETIO_PKT_SNAP_SHIFT)
+
+/* NOTE: Bits 9 and 10 are unused. */
+
+/** Length of any custom data before the L2 header, in words. */
+#define _NETIO_PKT_CUSTOM_LEN_SHIFT  11
+#define _NETIO_PKT_CUSTOM_LEN_RMASK  0x1F
+#define _NETIO_PKT_CUSTOM_LEN_MASK \
+          (_NETIO_PKT_CUSTOM_LEN_RMASK << _NETIO_PKT_CUSTOM_LEN_SHIFT)
+
+/** The L4 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L4_CSUM_SHIFT 16
+#define _NETIO_PKT_BAD_L4_CSUM_RMASK 0x1
+#define _NETIO_PKT_BAD_L4_CSUM_MASK \
+          (_NETIO_PKT_BAD_L4_CSUM_RMASK << _NETIO_PKT_BAD_L4_CSUM_SHIFT)
+
+/** Length of the L2 header, in words. */
+#define _NETIO_PKT_L2_LEN_SHIFT  17
+#define _NETIO_PKT_L2_LEN_RMASK  0x1F
+#define _NETIO_PKT_L2_LEN_MASK \
+          (_NETIO_PKT_L2_LEN_RMASK << _NETIO_PKT_L2_LEN_SHIFT)
+
+
+/* Flags in minimal packet metadata. */
+
+/** We need an eDMA checksum on this packet. */
+#define _NETIO_PKT_NEED_EDMA_CSUM_SHIFT            0
+#define _NETIO_PKT_NEED_EDMA_CSUM_RMASK            1
+#define _NETIO_PKT_NEED_EDMA_CSUM_MASK \
+         (_NETIO_PKT_NEED_EDMA_CSUM_RMASK << _NETIO_PKT_NEED_EDMA_CSUM_SHIFT)
+
+/* Data within the packet information table. */
+
+/* Note that, for efficiency, code which uses these fields assumes that none
+ * of the shift values below are zero.  See uses below for an explanation. */
+
+/** Offset within the L2 header of the innermost ethertype (in halfwords). */
+#define _NETIO_PKT_INFO_ETYPE_SHIFT       6
+#define _NETIO_PKT_INFO_ETYPE_RMASK    0x1F
+
+/** Offset within the L2 header of the VLAN tag (in halfwords). */
+#define _NETIO_PKT_INFO_VLAN_SHIFT       11
+#define _NETIO_PKT_INFO_VLAN_RMASK     0x1F
+
+#endif
+
+
+/** The size of a memory buffer representing a small packet.
+ *  @ingroup egress */
+#define SMALL_PACKET_SIZE 256
+
+/** The size of a memory buffer representing a large packet.
+ *  @ingroup egress */
+#define LARGE_PACKET_SIZE 2048
+
+/** The size of a memory buffer representing a jumbo packet.
+ *  @ingroup egress */
+#define JUMBO_PACKET_SIZE (12 * 1024)
+
+
+/* Common ethertypes.
+ * @ingroup ingress */
+/** @{ */
+/** The ethertype of IPv4. */
+#define ETHERTYPE_IPv4 (0x0800)
+/** The ethertype of ARP. */
+#define ETHERTYPE_ARP (0x0806)
+/** The ethertype of VLANs. */
+#define ETHERTYPE_VLAN (0x8100)
+/** The ethertype of a Q-in-Q header. */
+#define ETHERTYPE_Q_IN_Q (0x9100)
+/** The ethertype of IPv6. */
+#define ETHERTYPE_IPv6 (0x86DD)
+/** The ethertype of MPLS. */
+#define ETHERTYPE_MPLS (0x8847)
+/** @} */
+
+
+/** The possible return values of NETIO_PKT_STATUS.
+ * @ingroup ingress
+ */
+typedef enum
+{
+  /** No problems were detected with this packet. */
+  NETIO_PKT_STATUS_OK,
+  /** The packet is undersized; this is expected behavior if the packet's
+    * ethertype is unrecognized, but otherwise the packet is likely corrupt. */
+  NETIO_PKT_STATUS_UNDERSIZE,
+  /** The packet is oversized and some trailing bytes have been discarded.
+      This is expected behavior for short packets, since it's impossible to
+      precisely determine the amount of padding which may have been added to
+      them to make them meet the minimum Ethernet packet size. */
+  NETIO_PKT_STATUS_OVERSIZE,
+  /** The packet was judged to be corrupt by hardware (for instance, it had
+      a bad CRC, or part of it was discarded due to lack of buffer space in
+      the I/O shim) and should be discarded. */
+  NETIO_PKT_STATUS_BAD
+} netio_pkt_status_t;
+
+
+/** Log2 of how many buckets we have. */
+#define NETIO_LOG2_NUM_BUCKETS (10)
+
+/** How many buckets we have.
+ * @ingroup ingress */
+#define NETIO_NUM_BUCKETS (1 << NETIO_LOG2_NUM_BUCKETS)
+
+
+/**
+ * @brief A group-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given group.
+ */
+typedef union {
+  /** The header broken down into bits. */
+  struct {
+    /** Whether we should balance on L4, if available */
+    unsigned int __balance_on_l4:1;
+    /** Whether we should balance on L3, if available */
+    unsigned int __balance_on_l3:1;
+    /** Whether we should balance on L2, if available */
+    unsigned int __balance_on_l2:1;
+    /** Reserved for future use */
+    unsigned int __reserved:1;
+    /** The base bucket to use to send traffic */
+    unsigned int __bucket_base:NETIO_LOG2_NUM_BUCKETS;
+    /** The mask to apply to the balancing value. This must be one less
+     * than a power of two, e.g. 0x3 or 0xFF.
+     */
+    unsigned int __bucket_mask:NETIO_LOG2_NUM_BUCKETS;
+    /** Pad to 32 bits */
+    unsigned int __padding:(32 - 4 - 2 * NETIO_LOG2_NUM_BUCKETS);
+  } bits;
+  /** To send out the IDN. */
+  unsigned int word;
+}
+netio_group_t;
+
+
+/**
+ * @brief A VLAN-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given VLAN.
+ */
+typedef netio_group_t netio_vlan_t;
+
+
+/**
+ * A bucket-to-queue mapping.
+ * @ingroup setup
+ */
+typedef unsigned char netio_bucket_t;
+
+
+/**
+ * A packet size can always fit in a netio_size_t.
+ * @ingroup setup
+ */
+typedef unsigned int netio_size_t;
+
+
+/**
+ * @brief Ethernet standard (ingress) packet metadata.
+ *
+ * @ingroup ingress
+ *
+ * This is additional data associated with each packet.
+ * This structure is opaque and accessed through the @ref ingress.
+ *
+ * Also, the buffer population operation currently assumes that standard
+ * metadata is at least as large as minimal metadata, and will need to be
+ * modified if that is no longer the case.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  /** This structure is opaque. */
+  unsigned char opaque[24];
+#else
+  /** The overall ordinal of the packet */
+  unsigned int __packet_ordinal;
+  /** The ordinal of the packet within the group */
+  unsigned int __group_ordinal;
+  /** The best flow hash IPP could compute. */
+  unsigned int __flow_hash;
+  /** Flags pertaining to checksum calculation, packet type, etc. */
+  unsigned int __flags;
+  /** The first word of "user data". */
+  unsigned int __user_data_0;
+  /** The second word of "user data". */
+  unsigned int __user_data_1;
+#endif
+}
+netio_pkt_metadata_t;
+
+
+/** To ensure that the L3 header is aligned mod 4, the L2 header should be
+ * aligned mod 4 plus 2, since every supported L2 header is 4n + 2 bytes
+ * long.  The standard way to do this is to simply add 2 bytes of padding
+ * before the L2 header.
+ */
+#define NETIO_PACKET_PADDING 2
+
+
+
+/**
+ * @brief Ethernet minimal (egress) packet metadata.
+ *
+ * @ingroup egress
+ *
+ * This structure represents information about packets which have
+ * been processed by @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer().  This structure is opaque
+ * and accessed through the @ref egress.
+ *
+ * @internal This structure is actually copied into the memory used by
+ * standard metadata, which is assumed to be large enough.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  /** This structure is opaque. */
+  unsigned char opaque[14];
+#else
+  /** The offset of the L2 header from the start of the packet data. */
+  unsigned short l2_offset;
+  /** The offset of the L3 header from the start of the packet data. */
+  unsigned short l3_offset;
+  /** Where to write the checksum. */
+  unsigned char csum_location;
+  /** Where to start checksumming from. */
+  unsigned char csum_start;
+  /** Flags pertaining to checksum calculation etc. */
+  unsigned short flags;
+  /** The L2 length of the packet. */
+  unsigned short l2_length;
+  /** The checksum with which to seed the checksum generator. */
+  unsigned short csum_seed;
+  /** How much to checksum. */
+  unsigned short csum_length;
+#endif
+}
+netio_pkt_minimal_metadata_t;
+
+
+#ifndef __DOXYGEN__
+
+/**
+ * @brief An I/O notification header.
+ *
+ * This is the first word of data received from an I/O shim in a notification
+ * packet. It contains framing and status information.
+ */
+typedef union
+{
+  unsigned int word; /**< The whole word. */
+  /** The various fields. */
+  struct
+  {
+    unsigned int __channel:7;    /**< Resource channel. */
+    unsigned int __type:4;       /**< Type. */
+    unsigned int __ack:1;        /**< Whether an acknowledgement is needed. */
+    unsigned int __reserved:1;   /**< Reserved. */
+    unsigned int __protocol:1;   /**< A protocol-specific word is added. */
+    unsigned int __status:2;     /**< Status of the transfer. */
+    unsigned int __framing:2;    /**< Framing of the transfer. */
+    unsigned int __transfer_size:14; /**< Transfer size in bytes (total). */
+  } bits;
+}
+__netio_pkt_notif_t;
+
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_HANDLE_BASE(p) \
+  ((unsigned char*)((p).word & 0xFFFFFFC0))
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_BASE(p) \
+  _NETIO_PKT_HANDLE_BASE(p->__packet)
+
+/**
+ * @brief An I/O notification packet (second word)
+ *
+ * This is the second word of data received from an I/O shim in a notification
+ * packet.  This is the virtual address of the packet buffer, plus some flag
+ * bits.  (The virtual address of the packet is always 256-byte aligned so we
+ * have room for 8 bits' worth of flags in the low 8 bits.)
+ *
+ * @internal
+ * NOTE: The low two bits must contain "__queue", so the "packet size"
+ * (SIZE_SMALL, SIZE_LARGE, or SIZE_JUMBO) can be determined quickly.
+ *
+ * If __addr or __offset are moved, _NETIO_PKT_BASE
+ * (defined right below this) must be changed.
+ */
+typedef union
+{
+  unsigned int word; /**< The whole word. */
+  /** The various fields. */
+  struct
+  {
+    /** Which queue the packet will be returned to once it is sent back to
+        the IPP.  This is one of the SIZE_xxx values. */
+    unsigned int __queue:2;
+
+    /** The IPP handle of the sending IPP. */
+    unsigned int __ipp_handle:2;
+
+    /** Reserved for future use. */
+    unsigned int __reserved:1;
+
+    /** If 1, this packet has minimal (egress) metadata; otherwise, it
+        has standard (ingress) metadata. */
+    unsigned int __minimal:1;
+
+    /** Offset of the metadata within the packet.  This value is multiplied
+     *  by 64 and added to the base packet address to get the metadata
+     *  address.  Note that this field is aligned within the word such that
+     *  you can easily extract the metadata address with a 26-bit mask. */
+    unsigned int __offset:2;
+
+    /** The top 24 bits of the packet's virtual address. */
+    unsigned int __addr:24;
+  } bits;
+}
+__netio_pkt_handle_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/**
+ * @brief A handle for an I/O packet's storage.
+ * @ingroup ingress
+ *
+ * netio_pkt_handle_t encodes the concept of a ::netio_pkt_t with its
+ * packet metadata removed.  It is a much smaller type that exists to
+ * facilitate applications where the full ::netio_pkt_t type is too
+ * large, such as those that cache enormous numbers of packets or wish
+ * to transmit packet descriptors over the UDN.
+ *
+ * Because there is no metadata, most ::netio_pkt_t operations cannot be
+ * performed on a netio_pkt_handle_t.  It supports only
+ * netio_free_handle() (to free the buffer) and
+ * NETIO_PKT_CUSTOM_DATA_H() (to access a pointer to its contents).
+ * The application must acquire any additional metadata it wants from the
+ * original ::netio_pkt_t and record it separately.
+ *
+ * A netio_pkt_handle_t can be extracted from a ::netio_pkt_t by calling
+ * NETIO_PKT_HANDLE().  An invalid handle (analogous to NULL) can be
+ * created by assigning the value ::NETIO_PKT_HANDLE_NONE. A handle can
+ * be tested for validity with NETIO_PKT_HANDLE_IS_VALID().
+ */
+typedef struct
+{
+  unsigned int word; /**< Opaque bits. */
+} netio_pkt_handle_t;
+
+/**
+ * @brief A packet descriptor.
+ *
+ * @ingroup ingress
+ * @ingroup egress
+ *
+ * This data structure represents a packet.  The structure is manipulated
+ * through the @ref ingress and the @ref egress.
+ *
+ * While the contents of a netio_pkt_t are opaque, the structure itself is
+ * portable.  This means that it may be shared between all tiles which have
+ * done a netio_input_register() call for the interface on which the pkt_t
+ * was initially received (via netio_get_packet()) or retrieved (via
+ * netio_get_buffer()).  The contents of a netio_pkt_t can be transmitted to
+ * another tile via shared memory, or via a UDN message, or by other means.
+ * The destination tile may then use the pkt_t as if it had originally been
+ * received locally; it may read or write the packet's data, read its
+ * metadata, free the packet, send the packet, transfer the netio_pkt_t to
+ * yet another tile, and so forth.
+ *
+ * Once a netio_pkt_t has been transferred to a second tile, the first tile
+ * should not reference the original copy; in particular, if more than one
+ * tile frees or sends the same netio_pkt_t, the IPP's packet free lists will
+ * become corrupted.  Note also that each tile which reads or modifies
+ * packet data must obey the memory coherency rules outlined in @ref input.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  /** This structure is opaque. */
+  unsigned char opaque[32];
+#else
+  /** For an ingress packet (one with standard metadata), this is the
+   *  notification header we got from the I/O shim.  For an egress packet
+   *  (one with minimal metadata), this word is zero if the packet has not
+   *  been populated, and nonzero if it has. */
+  __netio_pkt_notif_t __notif_header;
+
+  /** Virtual address of the packet buffer, plus state flags. */
+  __netio_pkt_handle_t __packet;
+
+  /** Metadata associated with the packet. */
+  netio_pkt_metadata_t __metadata;
+#endif
+}
+netio_pkt_t;
+
+
+#ifndef __DOXYGEN__
+
+#define __NETIO_PKT_NOTIF_HEADER(pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE(pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_QUEUE(pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_NOTIF_HEADER_M(mda, pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE_M(mda, pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_MINIMAL(pkt) ((pkt)->__packet.bits.__minimal)
+#define __NETIO_PKT_QUEUE_M(mda, pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_FLAGS_M(mda, pkt) ((mda)->__flags)
+
+/* Packet information table, used by the attribute access functions below. */
+extern const uint16_t _netio_pkt_info[];
+
+#endif /* __DOXYGEN__ */
+
+
+#ifndef __DOXYGEN__
+/* These macros are deprecated and will disappear in a future MDE release. */
+#define NETIO_PKT_GOOD_CHECKSUM(pkt) \
+  NETIO_PKT_L4_CSUM_CORRECT(pkt)
+#define NETIO_PKT_GOOD_CHECKSUM_M(mda, pkt) \
+  NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt)
+#endif /* __DOXYGEN__ */
+
+
+/* Packet attribute access functions. */
+
+/** Return a pointer to the metadata for a packet.
+ * @ingroup ingress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_M" suffix usually improves performance.  This
+ * function must be called on an 'ingress' packet (i.e. one retrieved
+ * by @ref netio_get_packet(), on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer have not been called). Use of this
+ * function on an 'egress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_metadata_t*
+NETIO_PKT_METADATA(netio_pkt_t* pkt)
+{
+  netio_assert(!pkt->__packet.bits.__minimal);
+  return &pkt->__metadata;
+}
+
+
+/** Return a pointer to the minimal metadata for a packet.
+ * @ingroup egress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_MM" suffix usually improves performance.  This
+ * function must be called on an 'egress' packet (i.e. one on which
+ * @ref netio_populate_buffer() or @ref netio_populate_prepend_buffer()
+ * have been called, or one retrieved by @ref netio_get_buffer()). Use of
+ * this function on an 'ingress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_minimal_metadata_t*
+NETIO_PKT_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+  netio_assert(pkt->__packet.bits.__minimal);
+  return (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+}
+
+
+/** Determine whether a packet has 'minimal' metadata.
+ * @ingroup pktfuncs
+ *
+ * This function will return nonzero if the packet is an 'egress'
+ * packet (i.e. one on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer() have been called, or one
+ * retrieved by @ref netio_get_buffer()), and zero if the packet
+ * is an 'ingress' packet (i.e. one retrieved by @ref netio_get_packet(),
+ * which has not been converted into an 'egress' packet).
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet has minimal metadata.
+ */
+static __inline unsigned int
+NETIO_PKT_IS_MINIMAL(netio_pkt_t* pkt)
+{
+  return pkt->__packet.bits.__minimal;
+}
+
+
+/** Return a handle for a packet's storage.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A handle for the packet's storage.
+ */
+static __inline netio_pkt_handle_t
+NETIO_PKT_HANDLE(netio_pkt_t* pkt)
+{
+  netio_pkt_handle_t h;
+  h.word = pkt->__packet.word;
+  return h;
+}
+
+
+/** A special reserved value indicating the absence of a packet handle.
+ *
+ * @ingroup pktfuncs
+ */
+#define NETIO_PKT_HANDLE_NONE ((netio_pkt_handle_t) { 0 })
+
+
+/** Test whether a packet handle is valid.
+ *
+ * Applications may wish to use the reserved value NETIO_PKT_HANDLE_NONE
+ * to indicate no packet at all.  This function tests to see if a packet
+ * handle is a real handle, not this special reserved value.
+ *
+ * @ingroup pktfuncs
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return One if the packet handle is valid, else zero.
+ */
+static __inline unsigned int
+NETIO_PKT_HANDLE_IS_VALID(netio_pkt_handle_t handle)
+{
+  return handle.word != 0;
+}
+
+
+
+/** Return a pointer to the start of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_H(netio_pkt_handle_t handle)
+{
+  return _NETIO_PKT_HANDLE_BASE(handle) + NETIO_PACKET_PADDING;
+}
+
+
+/** Return the length of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  /*
+   * Note that we effectively need to extract a quantity from the flags word
+   * which is measured in words, and then turn it into bytes by shifting
+   * it left by 2.  We do this all at once by just shifting right two less
+   * bits, and shifting the mask up two bits.
+   */
+  return ((mda->__flags >> (_NETIO_PKT_CUSTOM_LEN_SHIFT - 2)) &
+          (_NETIO_PKT_CUSTOM_LEN_RMASK << 2));
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (__NETIO_PKT_NOTIF_HEADER(pkt).bits.__transfer_size -
+          NETIO_PACKET_PADDING);
+}
+
+
+/** Return a pointer to the start of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return NETIO_PKT_CUSTOM_DATA_H(NETIO_PKT_HANDLE(pkt));
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  /*
+   * Note that we effectively need to extract a quantity from the flags word
+   * which is measured in words, and then turn it into bytes by shifting
+   * it left by 2.  We do this all at once by just shifting right two less
+   * bits, and shifting the mask up two bits.  We then add two bytes.
+   */
+  return ((mda->__flags >> (_NETIO_PKT_L2_LEN_SHIFT - 2)) &
+          (_NETIO_PKT_L2_LEN_RMASK << 2)) + 2;
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt) -
+          NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the start of the packet's L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_CUSTOM_DATA_M(mda, pkt) +
+          NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally,
+ *  the IP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_L2_LENGTH_M(mda, pkt) -
+          NETIO_PKT_L2_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup ingress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_L2_DATA_M(mda, pkt) +
+          NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero.  (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.)  The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals.  Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__packet_ordinal;
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values.  In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.)  The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals.  Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__group_ordinal;
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value will be zero if the packet does not have a VLAN tag, or if
+ * this value was not extracted from the packet.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  int vl = (mda->__flags >> _NETIO_PKT_VLAN_SHIFT) & _NETIO_PKT_VLAN_RMASK;
+  unsigned short* pkt_p;
+  int index;
+  unsigned short val;
+
+  if (vl == _NETIO_PKT_VLAN_NONE)
+    return 0;
+
+  pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+  index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+  val = pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_VLAN_SHIFT) &
+              _NETIO_PKT_INFO_VLAN_RMASK];
+
+#ifdef __TILECC__
+  return (__insn_bytex(val) >> 16) & 0xFFF;
+#else
+  return (__builtin_bswap32(val) >> 16) & 0xFFF;
+#endif
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED_M()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  unsigned short* pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+  int index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+  unsigned short val =
+    pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_ETYPE_SHIFT) &
+          _NETIO_PKT_INFO_ETYPE_RMASK];
+
+  return __builtin_bswap32(val) >> 16;
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__flow_hash;
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__user_data_0;
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return mda->__user_data_1;
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags & _NETIO_PKT_NO_L4_CSUM_MASK);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ *  be correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags &
+           (_NETIO_PKT_BAD_L4_CSUM_MASK | _NETIO_PKT_NO_L4_CSUM_MASK));
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags & _NETIO_PKT_NO_L3_CSUM_MASK);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ *  correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags &
+           (_NETIO_PKT_BAD_L3_CSUM_MASK | _NETIO_PKT_NO_L3_CSUM_MASK));
+}
+
+
+/** Determine whether the ethertype was recognized and L3 packet data was
+ *  processed.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the ethertype was recognized and L3 packet data was
+ *   processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return !(mda->__flags & _NETIO_PKT_TYPE_UNRECOGNIZED_MASK);
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length.  Normally, applications should use
+ * @ref NETIO_PKT_BAD_M() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ *  its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return ((NETIO_PKT_STATUS_M(mda, pkt) & 1) &&
+          (NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt) ||
+           NETIO_PKT_STATUS_M(mda, pkt) == NETIO_PKT_STATUS_BAD));
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return mmd->l2_length;
+}
+
+
+/** Return the length of the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+                              netio_pkt_t* pkt)
+{
+  return mmd->l3_offset - mmd->l2_offset;
+}
+
+
+/** Return the length of the packet, starting with the L3 (IP) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return (NETIO_PKT_L2_LENGTH_MM(mmd, pkt) -
+          NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup egress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return _NETIO_PKT_BASE(pkt) + mmd->l3_offset;
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return _NETIO_PKT_BASE(pkt) + mmd->l2_offset;
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length.  Normally, applications should use
+ * @ref NETIO_PKT_BAD() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS(netio_pkt_t* pkt)
+{
+  netio_assert(!pkt->__packet.bits.__minimal);
+
+  return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ *  its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_BAD_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return  The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt);
+}
+
+
+/** Return a pointer to the packet's custom header.
+ *  A custom header may or may not be present, depending upon the IPP; its
+ *  contents and alignment are also IPP-dependent.  Currently, none of the
+ *  standard IPPs supplied by Tilera produce a custom header.  If present,
+ *  the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_CUSTOM_DATA_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt);
+  }
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return  The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L2_LENGTH_M(mda, pkt);
+  }
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L2_DATA_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L2_DATA_M(mda, pkt);
+  }
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally, the IP)
+ * header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L3_LENGTH_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L3_LENGTH_M(mda, pkt);
+  }
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup pktfuncs
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_L3_DATA_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_L3_DATA_M(mda, pkt);
+  }
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero.  (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.)  The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals.  Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values.  In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.)  The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals.  Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_GROUP_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This is usually also contained within the packet header.  If the packet
+ * does not have a VLAN tag, the VLAN ID returned by this function is zero.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_VLAN_ID_M(mda, pkt);
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_ETHERTYPE_M(mda, pkt);
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_FLOW_HASH_M(mda, pkt);
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_USER_DATA_0_M(mda, pkt);
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_USER_DATA_1_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L4_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ *  be correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L3_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ *  correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_L3_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the Ethertype was recognized and L3 packet data was
+ *  processed.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the Ethertype was recognized and L3 packet data was
+ *   processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED(netio_pkt_t* pkt)
+{
+  netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+  return NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt);
+}
+
+
+/** Set an egress packet's L2 length, using a metadata pointer to speed the
+ * computation.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt,
+                           int len)
+{
+  mmd->l2_length = len;
+}
+
+
+/** Set an egress packet's L2 length.
+ * @ingroup egress
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH(netio_pkt_t* pkt, int len)
+{
+  netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+  NETIO_PKT_SET_L2_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set an egress packet's L2 header length, using a metadata pointer to
+ *  speed the computation.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet.  It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+                                  netio_pkt_t* pkt, int len)
+{
+  mmd->l3_offset = mmd->l2_offset + len;
+}
+
+
+/** Set an egress packet's L2 header length.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet.  It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH(netio_pkt_t* pkt, int len)
+{
+  netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+  NETIO_PKT_SET_L2_HEADER_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set up an egress packet for hardware checksum computation, using a
+ *  metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ *  NetIO provides the ability to automatically calculate a standard
+ *  16-bit Internet checksum on transmitted packets.  The application
+ *  may specify the point in the packet where the checksum starts, the
+ *  number of bytes to be checksummed, and the two bytes in the packet
+ *  which will be replaced with the completed checksum.  (If the range
+ *  of bytes to be checksummed includes the bytes to be replaced, the
+ *  initial values of those bytes will be included in the checksum.)
+ *
+ *  For some protocols, the packet checksum covers data which is not present
+ *  in the packet, or is at least not contiguous to the main data payload.
+ *  For instance, the TCP checksum includes a "pseudo-header" which includes
+ *  the source and destination IP addresses of the packet.  To accommodate
+ *  this, the checksum engine may be "seeded" with an initial value, which
+ *  the application would need to compute based on the specific protocol's
+ *  requirements.  Note that the seed is given in host byte order (little-
+ *  endian), not network byte order (big-endian); code written to compute a
+ *  pseudo-header checksum in network byte order will need to byte-swap it
+ *  before use as the seed.
+ *
+ *  Note that the checksum is computed as part of the transmission process,
+ *  so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ *   the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ *   the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ *   to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ *   packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM_MM(netio_pkt_minimal_metadata_t* mmd,
+                            netio_pkt_t* pkt, int start, int length,
+                            int location, uint16_t seed)
+{
+  mmd->csum_start = start;
+  mmd->csum_length = length;
+  mmd->csum_location = location;
+  mmd->csum_seed = seed;
+  mmd->flags |= _NETIO_PKT_NEED_EDMA_CSUM_MASK;
+}
+
+
+/** Set up an egress packet for hardware checksum computation.
+ * @ingroup egress
+ *
+ *  NetIO provides the ability to automatically calculate a standard
+ *  16-bit Internet checksum on transmitted packets.  The application
+ *  may specify the point in the packet where the checksum starts, the
+ *  number of bytes to be checksummed, and the two bytes in the packet
+ *  which will be replaced with the completed checksum.  (If the range
+ *  of bytes to be checksummed includes the bytes to be replaced, the
+ *  initial values of those bytes will be included in the checksum.)
+ *
+ *  For some protocols, the packet checksum covers data which is not present
+ *  in the packet, or is at least not contiguous to the main data payload.
+ *  For instance, the TCP checksum includes a "pseudo-header" which includes
+ *  the source and destination IP addresses of the packet.  To accommodate
+ *  this, the checksum engine may be "seeded" with an initial value, which
+ *  the application would need to compute based on the specific protocol's
+ *  requirements.  Note that the seed is given in host byte order (little-
+ *  endian), not network byte order (big-endian); code written to compute a
+ *  pseudo-header checksum in network byte order will need to byte-swap it
+ *  before use as the seed.
+ *
+ *  Note that the checksum is computed as part of the transmission process,
+ *  so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ *   the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ *   the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ *   to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ *   packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM(netio_pkt_t* pkt, int start, int length,
+                         int location, uint16_t seed)
+{
+  netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+  NETIO_PKT_DO_EGRESS_CSUM_MM(mmd, pkt, start, length, location, seed);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ *  metadata pointer to speed the operation.
+ *  See @ref netio_populate_prepend_buffer() to get a full description of
+ *  prepending.
+ *
+ * @param[in,out] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+  return (pkt->__packet.bits.__offset << 6) +
+         NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ *  metadata pointer to speed the operation.
+ *  See @ref netio_populate_prepend_buffer() to get a full description of
+ *  prepending.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+  return (pkt->__packet.bits.__offset << 6) + mmd->l2_offset;
+}
+
+
+/** Return the number of bytes which could be prepended to a packet.
+ *  See @ref netio_populate_prepend_buffer() to get a full description of
+ *  prepending.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL(netio_pkt_t* pkt)
+{
+  if (NETIO_PKT_IS_MINIMAL(pkt))
+  {
+    netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+    return NETIO_PKT_PREPEND_AVAIL_MM(mmd, pkt);
+  }
+  else
+  {
+    netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+    return NETIO_PKT_PREPEND_AVAIL_M(mda, pkt);
+  }
+}
+
+
+/** Flush a packet's minimal metadata from the cache, using a metadata pointer
+ *  to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+                                    netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache, using a metadata
+ *  pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+                                  netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache,
+ *  using a metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+                                        netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache, using a metadata pointer
+ *  to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache, using a metadata
+ *  pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache,
+ *  using a metadata pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+/** Number of NUMA nodes we can distribute buffers to.
+ * @ingroup setup */
+#define NETIO_NUM_NODE_WEIGHTS  16
+
+/**
+ * @brief An object for specifying the characteristics of NetIO communication
+ * endpoint.
+ *
+ * @ingroup setup
+ *
+ * The @ref netio_input_register() function uses this structure to define
+ * how an application tile will communicate with an IPP.
+ *
+ *
+ * Future updates to NetIO may add new members to this structure,
+ * which can affect the success of the registration operation.  Thus,
+ * if dynamically initializing the structure, applications are urged to
+ * zero it out first, for example:
+ *
+ * @code
+ * netio_input_config_t config;
+ * memset(&config, 0, sizeof (config));
+ * config.flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE;
+ * config.num_receive_packets = NETIO_MAX_RECEIVE_PKTS;
+ * config.queue_id = 0;
+ *     .
+ *     .
+ *     .
+ * @endcode
+ *
+ * since that guarantees that any unused structure members, including
+ * members which did not exist when the application was first developed,
+ * will not have unexpected values.
+ *
+ * If statically initializing the structure, we strongly recommend use of
+ * C99-style named initializers, for example:
+ *
+ * @code
+ * netio_input_config_t config = {
+ *    .flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE,
+ *    .num_receive_packets = NETIO_MAX_RECEIVE_PKTS,
+ *    .queue_id = 0,
+ * },
+ * @endcode
+ *
+ * instead of the old-style structure initialization:
+ *
+ * @code
+ * // Bad example! Currently equivalent to the above, but don't do this.
+ * netio_input_config_t config = {
+ *    NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE, NETIO_MAX_RECEIVE_PKTS, 0
+ * },
+ * @endcode
+ *
+ * since the C99 style requires no changes to the code if elements of the
+ * config structure are rearranged.  (It also makes the initialization much
+ * easier to understand.)
+ *
+ * Except for items which address a particular tile's transmit or receive
+ * characteristics, such as the ::NETIO_RECV flag, applications are advised
+ * to specify the same set of configuration data on all registrations.
+ * This prevents differing results if multiple tiles happen to do their
+ * registration operations in a different order on different invocations of
+ * the application.  This is particularly important for things like link
+ * management flags, and buffer size and homing specifications.
+ *
+ * Unless the ::NETIO_FIXED_BUFFER_VA flag is specified in flags, the NetIO
+ * buffer pool is automatically created and mapped into the application's
+ * virtual address space at an address chosen by the operating system,
+ * using the common memory (cmem) facility in the Tilera Multicore
+ * Components library.  The cmem facility allows multiple processes to gain
+ * access to shared memory which is mapped into each process at an
+ * identical virtual address.  In order for this to work, the processes
+ * must have a common ancestor, which must create the common memory using
+ * tmc_cmem_init().
+ *
+ * In programs using the iLib process creation API, or in programs which use
+ * only one process (which include programs using the pthreads library),
+ * tmc_cmem_init() is called automatically.  All other applications
+ * must call it explicitly, before any child processes which might call
+ * netio_input_register() are created.
+ */
+typedef struct
+{
+  /** Registration characteristics.
+
+      This value determines several characteristics of the registration;
+      flags for different types of behavior are ORed together to make the
+      final flag value.  Generally applications should specify exactly
+      one flag from each of the following categories:
+
+      - Whether the application will be receiving packets on this queue
+        (::NETIO_RECV or ::NETIO_NO_RECV).
+
+      - Whether the application will be transmitting packets on this queue,
+        and if so, whether it will request egress checksum calculation
+        (::NETIO_XMIT, ::NETIO_XMIT_CSUM, or ::NETIO_NO_XMIT).  It is
+        legal to call netio_get_buffer() without one of the XMIT flags,
+        as long as ::NETIO_RECV is specified; in this case, the retrieved
+        buffers must be passed to another tile for transmission.
+
+      - Whether the application expects any vendor-specific tags in
+        its packets' L2 headers (::NETIO_TAG_NONE, ::NETIO_TAG_BRCM,
+        or ::NETIO_TAG_MRVL).  This must match the configuration of the
+        target IPP.
+
+      To accommodate applications written to previous versions of the NetIO
+      interface, none of the flags above are currently required; if omitted,
+      NetIO behaves more or less as if ::NETIO_RECV | ::NETIO_XMIT_CSUM |
+      ::NETIO_TAG_NONE were used.  However, explicit specification of
+      the relevant flags allows NetIO to do a better job of resource
+      allocation, allows earlier detection of certain configuration errors,
+      and may enable advanced features or higher performance in the future,
+      so their use is strongly recommended.
+
+      Note that specifying ::NETIO_NO_RECV along with ::NETIO_NO_XMIT
+      is a special case, intended primarily for use by programs which
+      retrieve network statistics or do link management operations.
+      When these flags are both specified, the resulting queue may not
+      be used with NetIO routines other than netio_get(), netio_set(),
+      and netio_input_unregister().  See @ref link for more information
+      on link management.
+
+      Other flags are optional; their use is described below.
+  */
+  int flags;
+
+  /** Interface name.  This is a string which identifies the specific
+      Ethernet controller hardware to be used.  The format of the string
+      is a device type and a device index, separated by a slash; so,
+      the first 10 Gigabit Ethernet controller is named "xgbe/0", while
+      the second 10/100/1000 Megabit Ethernet controller is named "gbe/1".
+   */
+  const char* interface;
+
+  /** Receive packet queue size.  This specifies the maximum number
+      of ingress packets that can be received on this queue without
+      being retrieved by @ref netio_get_packet().  If the IPP's distribution
+      algorithm calls for a packet to be sent to this queue, and this
+      number of packets are already pending there, the new packet
+      will either be discarded, or sent to another tile registered
+      for the same queue_id (see @ref drops).  This value must
+      be at least ::NETIO_MIN_RECEIVE_PKTS, can always be at least
+      ::NETIO_MAX_RECEIVE_PKTS, and may be larger than that on certain
+      interfaces.
+   */
+  int num_receive_packets;
+
+  /** The queue ID being requested.  Legal values for this range from 0
+      to ::NETIO_MAX_QUEUE_ID, inclusive.  ::NETIO_MAX_QUEUE_ID is always
+      greater than or equal to the number of tiles; this allows one queue
+      for each tile, plus at least one additional queue.  Some applications
+      may wish to use the additional queue as a destination for unwanted
+      packets, since packets delivered to queues for which no tiles have
+      registered are discarded.
+   */
+  unsigned int queue_id;
+
+  /** Maximum number of small send buffers to be held in the local empty
+      buffer cache.  This specifies the size of the area which holds
+      empty small egress buffers requested from the IPP but not yet
+      retrieved via @ref netio_get_buffer().  This value must be greater
+      than zero if the application will ever use @ref netio_get_buffer()
+      to allocate empty small egress buffers; it may be no larger than
+      ::NETIO_MAX_SEND_BUFFERS.  See @ref epp for more details on empty
+      buffer caching.
+   */
+  int num_send_buffers_small_total;
+
+  /** Number of small send buffers to be preallocated at registration.
+      If this value is nonzero, the specified number of empty small egress
+      buffers will be requested from the IPP during the netio_input_register
+      operation; this may speed the execution of @ref netio_get_buffer().
+      This may be no larger than @ref num_send_buffers_small_total.  See @ref
+      epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_small_prealloc;
+
+  /** Maximum number of large send buffers to be held in the local empty
+      buffer cache.  This specifies the size of the area which holds empty
+      large egress buffers requested from the IPP but not yet retrieved via
+      @ref netio_get_buffer().  This value must be greater than zero if the
+      application will ever use @ref netio_get_buffer() to allocate empty
+      large egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+      See @ref epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_large_total;
+
+  /** Number of large send buffers to be preallocated at registration.
+      If this value is nonzero, the specified number of empty large egress
+      buffers will be requested from the IPP during the netio_input_register
+      operation; this may speed the execution of @ref netio_get_buffer().
+      This may be no larger than @ref num_send_buffers_large_total.  See @ref
+      epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_large_prealloc;
+
+  /** Maximum number of jumbo send buffers to be held in the local empty
+      buffer cache.  This specifies the size of the area which holds empty
+      jumbo egress buffers requested from the IPP but not yet retrieved via
+      @ref netio_get_buffer().  This value must be greater than zero if the
+      application will ever use @ref netio_get_buffer() to allocate empty
+      jumbo egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+      See @ref epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_jumbo_total;
+
+  /** Number of jumbo send buffers to be preallocated at registration.
+      If this value is nonzero, the specified number of empty jumbo egress
+      buffers will be requested from the IPP during the netio_input_register
+      operation; this may speed the execution of @ref netio_get_buffer().
+      This may be no larger than @ref num_send_buffers_jumbo_total.  See @ref
+      epp for more details on empty buffer caching.
+   */
+  int num_send_buffers_jumbo_prealloc;
+
+  /** Total packet buffer size.  This determines the total size, in bytes,
+      of the NetIO buffer pool.  Note that the maximum number of available
+      buffers of each size is determined during hypervisor configuration
+      (see the <em>System Programmer's Guide</em> for details); this just
+      influences how much host memory is allocated for those buffers.
+
+      The buffer pool is allocated from common memory, which will be
+      automatically initialized if needed.  If your buffer pool is larger
+      than 240 MB, you might need to explicitly call @c tmc_cmem_init(),
+      as described in the Application Libraries Reference Manual (UG227).
+
+      Packet buffers are currently allocated in chunks of 16 MB; this
+      value will be rounded up to the next larger multiple of 16 MB.
+      If this value is zero, a default of 32 MB will be used; this was
+      the value used by previous versions of NetIO.  Note that taking this
+      default also affects the placement of buffers on Linux NUMA nodes.
+      See @ref buffer_node_weights for an explanation of buffer placement.
+
+      In order to successfully allocate packet buffers, Linux must have
+      available huge pages on the relevant Linux NUMA nodes.  See the
+      <em>System Programmer's Guide</em> for information on configuring
+      huge page support in Linux.
+   */
+  uint64_t total_buffer_size;
+
+  /** Buffer placement weighting factors.
+
+      This array specifies the relative amount of buffering to place
+      on each of the available Linux NUMA nodes.  This array is
+      indexed by the NUMA node, and the values in the array are
+      proportional to the amount of buffer space to allocate on that
+      node.
+
+      If memory striping is enabled in the Hypervisor, then there is
+      only one logical NUMA node (node 0). In that case, NetIO will by
+      default ignore the suggested buffer node weights, and buffers
+      will be striped across the physical memory controllers. See
+      UG209 System Programmer's Guide for a description of the
+      hypervisor option that controls memory striping.
+
+      If memory striping is disabled, then there are up to four NUMA
+      nodes, corresponding to the four DDRAM controllers in the TILE
+      processor architecture.  See UG100 Tile Processor Architecture
+      Overview for a diagram showing the location of each of the DDRAM
+      controllers relative to the tile array.
+
+      For instance, if memory striping is disabled, the following
+      configuration strucure:
+
+      @code
+      netio_input_config_t config = {
+            .
+            .
+            .
+        .total_buffer_size = 4 * 16 * 1024 * 1024;
+        .buffer_node_weights = { 1, 0, 1, 0 },
+      },
+      @endcode
+
+      would result in 32 MB of buffers being placed on controller 0, and
+      32 MB on controller 2.  (Since buffers are allocated in units of
+      16 MB, some sets of weights will not be able to be matched exactly.)
+
+      For the weights to be effective, @ref total_buffer_size must be
+      nonzero.  If @ref total_buffer_size is zero, causing the default
+      32 MB of buffer space to be used, then any specified weights will
+      be ignored, and buffers will positioned as they were in previous
+      versions of NetIO:
+
+      - For xgbe/0 and gbe/0, 16 MB of buffers will be placed on controller 1,
+        and the other 16 MB will be placed on controller 2.
+
+      - For xgbe/1 and gbe/1, 16 MB of buffers will be placed on controller 2,
+        and the other 16 MB will be placed on controller 3.
+
+      If @ref total_buffer_size is nonzero, but all weights are zero,
+      then all buffer space will be allocated on Linux NUMA node zero.
+
+      By default, the specified buffer placement is treated as a hint;
+      if sufficient free memory is not available on the specified
+      controllers, the buffers will be allocated elsewhere.  However,
+      if the ::NETIO_STRICT_HOMING flag is specified in @ref flags, then a
+      failure to allocate buffer space exactly as requested will cause the
+      registration operation to fail with an error of ::NETIO_CANNOT_HOME.
+
+      Note that maximal network performance cannot be achieved with
+      only one memory controller.
+   */
+  uint8_t buffer_node_weights[NETIO_NUM_NODE_WEIGHTS];
+
+  /** Fixed virtual address for packet buffers.  Only valid when
+      ::NETIO_FIXED_BUFFER_VA is specified in @ref flags; see the
+      description of that flag for details.
+   */
+  void* fixed_buffer_va;
+
+  /**
+      Maximum number of outstanding send packet requests.  This value is
+      only relevant when an EPP is in use; it determines the number of
+      slots in the EPP's outgoing packet queue which this tile is allowed
+      to consume, and thus the number of packets which may be sent before
+      the sending tile must wait for an acknowledgment from the EPP.
+      Modifying this value is generally only helpful when using @ref
+      netio_send_packet_vector(), where it can help improve performance by
+      allowing a single vector send operation to process more packets.
+      Typically it is not specified, and the default, which divides the
+      outgoing packet slots evenly between all tiles on the chip, is used.
+
+      If a registration asks for more outgoing packet queue slots than are
+      available, ::NETIO_TOOMANY_XMIT will be returned.  The total number
+      of packet queue slots which are available for all tiles for each EPP
+      is subject to change, but is currently ::NETIO_TOTAL_SENDS_OUTSTANDING.
+
+
+      This value is ignored if ::NETIO_XMIT is not specified in flags.
+      If you want to specify a large value here for a specific tile, you are
+      advised to specify NETIO_NO_XMIT on other, non-transmitting tiles so
+      that they do not consume a default number of packet slots.  Any tile
+      transmitting is required to have at least ::NETIO_MIN_SENDS_OUTSTANDING
+      slots allocated to it; values less than that will be silently
+      increased by the NetIO library.
+   */
+  int num_sends_outstanding;
+}
+netio_input_config_t;
+
+
+/** Registration flags; used in the @ref netio_input_config_t structure.
+ * @addtogroup setup
+ */
+/** @{ */
+
+/** Fail a registration request if we can't put packet buffers
+    on the specified memory controllers. */
+#define NETIO_STRICT_HOMING   0x00000002
+
+/** This application expects no tags on its L2 headers. */
+#define NETIO_TAG_NONE        0x00000004
+
+/** This application expects Marvell extended tags on its L2 headers. */
+#define NETIO_TAG_MRVL        0x00000008
+
+/** This application expects Broadcom tags on its L2 headers. */
+#define NETIO_TAG_BRCM        0x00000010
+
+/** This registration may call routines which receive packets. */
+#define NETIO_RECV            0x00000020
+
+/** This registration may not call routines which receive packets. */
+#define NETIO_NO_RECV         0x00000040
+
+/** This registration may call routines which transmit packets. */
+#define NETIO_XMIT            0x00000080
+
+/** This registration may call routines which transmit packets with
+    checksum acceleration. */
+#define NETIO_XMIT_CSUM       0x00000100
+
+/** This registration may not call routines which transmit packets. */
+#define NETIO_NO_XMIT         0x00000200
+
+/** This registration wants NetIO buffers mapped at an application-specified
+    virtual address.
+
+    NetIO buffers are by default created by the TMC common memory facility,
+    which must be configured by a common ancestor of all processes sharing
+    a network interface.  When this flag is specified, NetIO buffers are
+    instead mapped at an address chosen by the application (and specified
+    in @ref netio_input_config_t::fixed_buffer_va).  This allows multiple
+    unrelated but cooperating processes to share a NetIO interface.
+    All processes sharing the same interface must specify this flag,
+    and all must specify the same fixed virtual address.
+
+    @ref netio_input_config_t::fixed_buffer_va must be a
+    multiple of 16 MB, and the packet buffers will occupy @ref
+    netio_input_config_t::total_buffer_size bytes of virtual address
+    space, beginning at that address.  If any of those virtual addresses
+    are currently occupied by other memory objects, like application or
+    shared library code or data, @ref netio_input_register() will return
+    ::NETIO_FAULT.  While it is impossible to provide a fixed_buffer_va
+    which will work for all applications, a good first guess might be to
+    use 0xb0000000 minus @ref netio_input_config_t::total_buffer_size.
+    If that fails, it might be helpful to consult the running application's
+    virtual address description file (/proc/<em>pid</em>/maps) to see
+    which regions of virtual address space are available.
+ */
+#define NETIO_FIXED_BUFFER_VA 0x00000400
+
+/** This registration call will not complete unless the network link
+    is up.  The process will wait several seconds for this to happen (the
+    precise interval is link-dependent), but if the link does not come up,
+    ::NETIO_LINK_DOWN will be returned.  This flag is the default if
+    ::NETIO_NOREQUIRE_LINK_UP is not specified.  Note that this flag by
+    itself does not request that the link be brought up; that can be done
+    with the ::NETIO_AUTO_LINK_UPDN or ::NETIO_AUTO_LINK_UP flags (the
+    latter is the default if no NETIO_AUTO_LINK_xxx flags are specified),
+    or by explicitly setting the link's desired state via netio_set().
+    If the link is not brought up by one of those methods, and this flag
+    is specified, the registration operation will return ::NETIO_LINK_DOWN.
+    This flag is ignored if it is specified along with ::NETIO_NO_XMIT and
+    ::NETIO_NO_RECV.  See @ref link for more information on link
+    management.
+ */
+#define NETIO_REQUIRE_LINK_UP    0x00000800
+
+/** This registration call will complete even if the network link is not up.
+    Whenever the link is not up, packets will not be sent or received:
+    netio_get_packet() will return ::NETIO_NOPKT once all queued packets
+    have been drained, and netio_send_packet() and similar routines will
+    return NETIO_QUEUE_FULL once the outgoing packet queue in the EPP
+    or the I/O shim is full.  See @ref link for more information on link
+    management.
+ */
+#define NETIO_NOREQUIRE_LINK_UP  0x00001000
+
+#ifndef __DOXYGEN__
+/*
+ * These are part of the implementation of the NETIO_AUTO_LINK_xxx flags,
+ * but should not be used directly by applications, and are thus not
+ * documented.
+ */
+#define _NETIO_AUTO_UP        0x00002000
+#define _NETIO_AUTO_DN        0x00004000
+#define _NETIO_AUTO_PRESENT   0x00008000
+#endif
+
+/** Set the desired state of the link to up, allowing any speeds which are
+    supported by the link hardware, as part of this registration operation.
+    Do not take down the link automatically.  This is the default if
+    no other NETIO_AUTO_LINK_xxx flags are specified.  This flag is ignored
+    if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+    See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UP     (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP)
+
+/** Set the desired state of the link to up, allowing any speeds which are
+    supported by the link hardware, as part of this registration operation.
+    Set the desired state of the link to down the next time no tiles are
+    registered for packet reception or transmission.  This flag is ignored
+    if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+    See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UPDN   (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP | \
+                                _NETIO_AUTO_DN)
+
+/** Set the desired state of the link to down the next time no tiles are
+    registered for packet reception or transmission.  This flag is ignored
+    if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+    See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_DN     (_NETIO_AUTO_PRESENT | _NETIO_AUTO_DN)
+
+/** Do not bring up the link automatically as part of this registration
+    operation.  Do not take down the link automatically.  This flag
+    is ignored if it is specified along with ::NETIO_NO_XMIT and
+    ::NETIO_NO_RECV.  See @ref link for more information on link management.
+  */
+#define NETIO_AUTO_LINK_NONE   _NETIO_AUTO_PRESENT
+
+
+/** Minimum number of receive packets. */
+#define NETIO_MIN_RECEIVE_PKTS            16
+
+/** Lower bound on the maximum number of receive packets; may be higher
+    than this on some interfaces. */
+#define NETIO_MAX_RECEIVE_PKTS           128
+
+/** Maximum number of send buffers, per packet size. */
+#define NETIO_MAX_SEND_BUFFERS            16
+
+/** Number of EPP queue slots, and thus outstanding sends, per EPP. */
+#define NETIO_TOTAL_SENDS_OUTSTANDING   2015
+
+/** Minimum number of EPP queue slots, and thus outstanding sends, per
+ *  transmitting tile. */
+#define NETIO_MIN_SENDS_OUTSTANDING       16
+
+
+/**@}*/
+
+#ifndef __DOXYGEN__
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+struct __netio_queue_impl_t;
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+struct __netio_queue_user_impl_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/** A netio_queue_t describes a NetIO communications endpoint.
+ * @ingroup setup
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  uint8_t opaque[8];                 /**< This is an opaque structure. */
+#else
+  struct __netio_queue_impl_t* __system_part;    /**< The system part. */
+  struct __netio_queue_user_impl_t* __user_part; /**< The user part. */
+#ifdef _NETIO_PTHREAD
+  _netio_percpu_mutex_t lock;                    /**< Queue lock. */
+#endif
+#endif
+}
+netio_queue_t;
+
+
+/**
+ * @brief Packet send context.
+ *
+ * @ingroup egress
+ *
+ * Packet send context for use with netio_send_packet_prepare and _commit.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+  uint8_t opaque[44];   /**< This is an opaque structure. */
+#else
+  uint8_t flags;        /**< Defined below */
+  uint8_t datalen;      /**< Number of valid words pointed to by data. */
+  uint32_t request[9];  /**< Request to be sent to the EPP or shim.  Note
+                             that this is smaller than the 11-word maximum
+                             request size, since some constant values are
+                             not saved in the context. */
+  uint32_t *data;       /**< Data to be sent to the EPP or shim via IDN. */
+#endif
+}
+netio_send_pkt_context_t;
+
+
+#ifndef __DOXYGEN__
+#define SEND_PKT_CTX_USE_EPP   1  /**< We're sending to an EPP. */
+#define SEND_PKT_CTX_SEND_CSUM 2  /**< Request includes a checksum. */
+#endif
+
+/**
+ * @brief Packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * This data structure is used with netio_send_packet_vector() to send multiple
+ * packets with one NetIO call.  The structure should be initialized by
+ * calling netio_pkt_vector_set(), rather than by setting the fields
+ * directly.
+ *
+ * This structure is guaranteed to be a power of two in size, no
+ * bigger than one L2 cache line, and to be aligned modulo its size.
+ */
+typedef struct
+#ifndef __DOXYGEN__
+__attribute__((aligned(8)))
+#endif
+{
+  /** Reserved for use by the user application.  When initialized with
+   *  the netio_set_pkt_vector_entry() function, this field is guaranteed
+   *  to be visible to readers only after all other fields are already
+   *  visible.  This way it can be used as a valid flag or generation
+   *  counter. */
+  uint8_t user_data;
+
+  /* Structure members below this point should not be accessed directly by
+   * applications, as they may change in the future. */
+
+  /** Low 8 bits of the packet address to send.  The high bits are
+   *  acquired from the 'handle' field. */
+  uint8_t buffer_address_low;
+
+  /** Number of bytes to transmit. */
+  uint16_t size;
+
+  /** The raw handle from a netio_pkt_t.  If this is NETIO_PKT_HANDLE_NONE,
+   *  this vector entry will be skipped and no packet will be transmitted. */
+  netio_pkt_handle_t handle;
+}
+netio_pkt_vector_entry_t;
+
+
+/**
+ * @brief Initialize fields in a packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * @param[out] v Pointer to the vector entry to be initialized.
+ * @param[in] pkt Packet to be transmitted when the vector entry is passed to
+ *        netio_send_packet_vector().  Note that the packet's attributes
+ *        (e.g., its L2 offset and length) are captured at the time this
+ *        routine is called; subsequent changes in those attributes will not
+ *        be reflected in the packet which is actually transmitted.
+ *        Changes in the packet's contents, however, will be so reflected.
+ *        If this is NULL, no packet will be transmitted.
+ * @param[in] user_data User data to be set in the vector entry.
+ *        This function guarantees that the "user_data" field will become
+ *        visible to a reader only after all other fields have become visible.
+ *        This allows a structure in a ring buffer to be written and read
+ *        by a polling reader without any locks or other synchronization.
+ */
+static __inline void
+netio_pkt_vector_set(volatile netio_pkt_vector_entry_t* v, netio_pkt_t* pkt,
+                     uint8_t user_data)
+{
+  if (pkt)
+  {
+    if (NETIO_PKT_IS_MINIMAL(pkt))
+    {
+      netio_pkt_minimal_metadata_t* mmd =
+        (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+      v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_MM(mmd, pkt) & 0xFF;
+      v->size = NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+    }
+    else
+    {
+      netio_pkt_metadata_t* mda = &pkt->__metadata;
+      v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_M(mda, pkt) & 0xFF;
+      v->size = NETIO_PKT_L2_LENGTH_M(mda, pkt);
+    }
+    v->handle.word = pkt->__packet.word;
+  }
+  else
+  {
+    v->handle.word = 0;   /* Set handle to NETIO_PKT_HANDLE_NONE. */
+  }
+
+  __asm__("" : : : "memory");
+
+  v->user_data = user_data;
+}
+
+
+/**
+ * Flags and structures for @ref netio_get() and @ref netio_set().
+ * @ingroup config
+ */
+
+/** @{ */
+/** Parameter class; addr is a NETIO_PARAM_xxx value. */
+#define NETIO_PARAM       0
+/** Interface MAC address. This address is only valid with @ref netio_get().
+ *  The value is a 6-byte MAC address.  Depending upon the overall system
+ *  design, a MAC address may or may not be available for each interface. */
+#define NETIO_PARAM_MAC        0
+
+/** Determine whether to suspend output on the receipt of pause frames.
+ *  If the value is nonzero, the I/O shim will suspend output when a pause
+ *  frame is received.  If the value is zero, pause frames will be ignored. */
+#define NETIO_PARAM_PAUSE_IN   1
+
+/** Determine whether to send pause frames if the I/O shim packet FIFOs are
+ *  nearly full.  If the value is zero, pause frames are not sent.  If
+ *  the value is nonzero, it is the delay value which will be sent in any
+ *  pause frames which are output, in units of 512 bit times. */
+#define NETIO_PARAM_PAUSE_OUT  2
+
+/** Jumbo frame support.  The value is a 4-byte integer.  If the value is
+ *  nonzero, the MAC will accept frames of up to 10240 bytes.  If the value
+ *  is zero, the MAC will only accept frames of up to 1544 bytes. */
+#define NETIO_PARAM_JUMBO      3
+
+/** I/O shim's overflow statistics register.  The value is two 16-bit integers.
+ *  The first 16-bit value (or the low 16 bits, if the value is treated as a
+ *  32-bit number) is the count of packets which were completely dropped and
+ *  not delivered by the shim.  The second 16-bit value (or the high 16 bits,
+ *  if the value is treated as a 32-bit number) is the count of packets
+ *  which were truncated and thus only partially delivered by the shim.  This
+ *  register is automatically reset to zero after it has been read.
+ */
+#define NETIO_PARAM_OVERFLOW   4
+
+/** IPP statistics.  This address is only valid with @ref netio_get().  The
+ *  value is a netio_stat_t structure.  Unlike the I/O shim statistics, the
+ *  IPP statistics are not all reset to zero on read; see the description
+ *  of the netio_stat_t for details. */
+#define NETIO_PARAM_STAT 5
+
+/** Possible link state.  The value is a combination of "NETIO_LINK_xxx"
+ *  flags.  With @ref netio_get(), this will indicate which flags are
+ *  actually supported by the hardware.
+ *
+ *  For historical reasons, specifying this value to netio_set() will have
+ *  the same behavior as using ::NETIO_PARAM_LINK_CONFIG, but this usage is
+ *  discouraged.
+ */
+#define NETIO_PARAM_LINK_POSSIBLE_STATE 6
+
+/** Link configuration. The value is a combination of "NETIO_LINK_xxx" flags.
+ *  With @ref netio_set(), this will attempt to immediately bring up the
+ *  link using whichever of the requested flags are supported by the
+ *  hardware, or take down the link if the flags are zero; if this is
+ *  not possible, an error will be returned.  Many programs will want
+ *  to use ::NETIO_PARAM_LINK_DESIRED_STATE instead.
+ *
+ *  For historical reasons, specifying this value to netio_get() will
+ *  have the same behavior as using ::NETIO_PARAM_LINK_POSSIBLE_STATE,
+ *  but this usage is discouraged.
+ */
+#define NETIO_PARAM_LINK_CONFIG NETIO_PARAM_LINK_POSSIBLE_STATE
+
+/** Current link state. This address is only valid with @ref netio_get().
+ *  The value is zero or more of the "NETIO_LINK_xxx" flags, ORed together.
+ *  If the link is down, the value ANDed with NETIO_LINK_SPEED will be
+ *  zero; if the link is up, the value ANDed with NETIO_LINK_SPEED will
+ *  result in exactly one of the NETIO_LINK_xxx values, indicating the
+ *  current speed. */
+#define NETIO_PARAM_LINK_CURRENT_STATE 7
+
+/** Variant symbol for current state, retained for compatibility with
+ *  pre-MDE-2.1 programs. */
+#define NETIO_PARAM_LINK_STATUS NETIO_PARAM_LINK_CURRENT_STATE
+
+/** Packet Coherence protocol. This address is only valid with @ref netio_get().
+ *  The value is nonzero if the interface is configured for cache-coherent DMA.
+ */
+#define NETIO_PARAM_COHERENT 8
+
+/** Desired link state. The value is a conbination of "NETIO_LINK_xxx"
+ *  flags, which specify the desired state for the link.  With @ref
+ *  netio_set(), this will, in the background, attempt to bring up the link
+ *  using whichever of the requested flags are reasonable, or take down the
+ *  link if the flags are zero.  The actual link up or down operation may
+ *  happen after this call completes.  If the link state changes in the
+ *  future, the system will continue to try to get back to the desired link
+ *  state; for instance, if the link is brought up successfully, and then
+ *  the network cable is disconnected, the link will go down.  However, the
+ *  desired state of the link is still up, so if the cable is reconnected,
+ *  the link will be brought up again.
+ *
+ *  With @ref netio_get(), this will indicate the desired state for the
+ *  link, as set with a previous netio_set() call, or implicitly by a
+ *  netio_input_register() or netio_input_unregister() operation.  This may
+ *  not reflect the current state of the link; to get that, use
+ *  ::NETIO_PARAM_LINK_CURRENT_STATE. */
+#define NETIO_PARAM_LINK_DESIRED_STATE 9
+
+/** NetIO statistics structure.  Retrieved using the ::NETIO_PARAM_STAT
+ *  address passed to @ref netio_get(). */
+typedef struct
+{
+  /** Number of packets which have been received by the IPP and forwarded
+   *  to a tile's receive queue for processing.  This value wraps at its
+   *  maximum, and is not cleared upon read. */
+  uint32_t packets_received;
+
+  /** Number of packets which have been dropped by the IPP, because they could
+   *  not be received, or could not be forwarded to a tile.  The former happens
+   *  when the IPP does not have a free packet buffer of suitable size for an
+   *  incoming frame.  The latter happens when all potential destination tiles
+   *  for a packet, as defined by the group, bucket, and queue configuration,
+   *  have full receive queues.   This value wraps at its maximum, and is not
+   *  cleared upon read. */
+  uint32_t packets_dropped;
+
+  /*
+   * Note: the #defines after each of the following four one-byte values
+   * denote their location within the third word of the netio_stat_t.  They
+   * are intended for use only by the IPP implementation and are thus omitted
+   * from the Doxygen output.
+   */
+
+  /** Number of packets dropped because no worker was able to accept a new
+   *  packet.  This value saturates at its maximum, and is cleared upon
+   *  read. */
+  uint8_t drops_no_worker;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_WORKER   0
+#endif
+
+  /** Number of packets dropped because no small buffers were available.
+   *  This value saturates at its maximum, and is cleared upon read. */
+  uint8_t drops_no_smallbuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_SMALLBUF 1
+#endif
+
+  /** Number of packets dropped because no large buffers were available.
+   *  This value saturates at its maximum, and is cleared upon read. */
+  uint8_t drops_no_largebuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_LARGEBUF 2
+#endif
+
+  /** Number of packets dropped because no jumbo buffers were available.
+   *  This value saturates at its maximum, and is cleared upon read. */
+  uint8_t drops_no_jumbobuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_JUMBOBUF 3
+#endif
+}
+netio_stat_t;
+
+
+/** Link can run, should run, or is running at 10 Mbps. */
+#define NETIO_LINK_10M         0x01
+
+/** Link can run, should run, or is running at 100 Mbps. */
+#define NETIO_LINK_100M        0x02
+
+/** Link can run, should run, or is running at 1 Gbps. */
+#define NETIO_LINK_1G          0x04
+
+/** Link can run, should run, or is running at 10 Gbps. */
+#define NETIO_LINK_10G         0x08
+
+/** Link should run at the highest speed supported by the link and by
+ *  the device connected to the link.  Only usable as a value for
+ *  the link's desired state; never returned as a value for the current
+ *  or possible states. */
+#define NETIO_LINK_ANYSPEED    0x10
+
+/** All legal link speeds. */
+#define NETIO_LINK_SPEED  (NETIO_LINK_10M  | \
+                           NETIO_LINK_100M | \
+                           NETIO_LINK_1G   | \
+                           NETIO_LINK_10G  | \
+                           NETIO_LINK_ANYSPEED)
+
+
+/** MAC register class.  Addr is a register offset within the MAC.
+ *  Registers within the XGbE and GbE MACs are documented in the Tile
+ *  Processor I/O Device Guide (UG104). MAC registers start at address
+ *  0x4000, and do not include the MAC_INTERFACE registers. */
+#define NETIO_MAC             1
+
+/** MDIO register class (IEEE 802.3 clause 22 format).  Addr is the "addr"
+ *  member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO            2
+
+/** MDIO register class (IEEE 802.3 clause 45 format).  Addr is the "addr"
+ *  member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO_CLAUSE45   3
+
+/** NetIO MDIO address type.  Retrieved or provided using the ::NETIO_MDIO
+ *  address passed to @ref netio_get() or @ref netio_set(). */
+typedef union
+{
+  struct
+  {
+    unsigned int reg:16;  /**< MDIO register offset.  For clause 22 access,
+                               must be less than 32. */
+    unsigned int phy:5;   /**< Which MDIO PHY to access. */
+    unsigned int dev:5;   /**< Which MDIO device to access within that PHY.
+                               Applicable for clause 45 access only; ignored
+                               for clause 22 access. */
+  }
+  bits;                   /**< Container for bitfields. */
+  uint64_t addr;          /**< Value to pass to @ref netio_get() or
+                           *   @ref netio_set(). */
+}
+netio_mdio_addr_t;
+
+/** @} */
+
+#endif /* __NETIO_INTF_H__ */
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
index 112b1e248f0..b4c8e8ec45d 100644
--- a/arch/tile/kernel/Makefile
+++ b/arch/tile/kernel/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_SMP)		+= smpboot.o smp.o tlb.o
 obj-$(CONFIG_MODULES)		+= module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_PCI)		+= pci.o
diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c
index 67617a05e60..dbc213adf5e 100644
--- a/arch/tile/kernel/compat.c
+++ b/arch/tile/kernel/compat.c
@@ -21,7 +21,6 @@
 #include <linux/kdev_t.h>
 #include <linux/fs.h>
 #include <linux/fcntl.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 #include <linux/signal.h>
 #include <asm/syscalls.h>
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index fb64b99959d..dbb0dfc7bec 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -15,7 +15,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
@@ -291,12 +290,12 @@ long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
 	return ret;
 }
 
+/* The assembly shim for this function arranges to ignore the return value. */
 long compat_sys_rt_sigreturn(struct pt_regs *regs)
 {
 	struct compat_rt_sigframe __user *frame =
 		(struct compat_rt_sigframe __user *) compat_ptr(regs->sp);
 	sigset_t set;
-	long r0;
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
@@ -309,13 +308,13 @@ long compat_sys_rt_sigreturn(struct pt_regs *regs)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
 
 	if (compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
 		goto badframe;
 
-	return r0;
+	return 0;
 
 badframe:
 	force_sig(SIGSEGV, current);
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index f5821626247..5eed4a02bf6 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -1342,8 +1342,8 @@ handle_syscall:
 	lw      r20, r20
 
 	/* Jump to syscall handler. */
-	jalr    r20; .Lhandle_syscall_link:
-	FEEDBACK_REENTER(handle_syscall)
+	jalr    r20
+.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */
 
 	/*
 	 * Write our r0 onto the stack so it gets restored instead
@@ -1352,6 +1352,9 @@ handle_syscall:
 	PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
 	sw      r29, r0
 
+.Lsyscall_sigreturn_skip:
+	FEEDBACK_REENTER(handle_syscall)
+
 	/* Do syscall trace again, if requested. */
 	lw	r30, r31
 	andi    r30, r30, _TIF_SYSCALL_TRACE
@@ -1536,9 +1539,24 @@ STD_ENTRY_LOCAL(bad_intr)
 	};                                              \
 	STD_ENDPROC(_##x)
 
+/*
+ * Special-case sigreturn to not write r0 to the stack on return.
+ * This is technically more efficient, but it also avoids difficulties
+ * in the 64-bit OS when handling 32-bit compat code, since we must not
+ * sign-extend r0 for the sigreturn return-value case.
+ */
+#define PTREGS_SYSCALL_SIGRETURN(x, reg)                \
+	STD_ENTRY(_##x);                                \
+	addli   lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \
+	{                                               \
+	 PTREGS_PTR(reg, PTREGS_OFFSET_BASE);           \
+	 j      x                                       \
+	};                                              \
+	STD_ENDPROC(_##x)
+
 PTREGS_SYSCALL(sys_execve, r3)
 PTREGS_SYSCALL(sys_sigaltstack, r2)
-PTREGS_SYSCALL(sys_rt_sigreturn, r0)
+PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0)
 PTREGS_SYSCALL(sys_cmpxchg_badaddr, r1)
 
 /* Save additional callee-saves to pt_regs, put address in r4 and jump. */
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
new file mode 100644
index 00000000000..a1ee25be9ad
--- /dev/null
+++ b/arch/tile/kernel/pci.c
@@ -0,0 +1,621 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/byteorder.h>
+#include <asm/hv_driver.h>
+#include <hv/drv_pcie_rc_intf.h>
+
+
+/*
+ * Initialization flow and process
+ * -------------------------------
+ *
+ * This files containes the routines to search for PCI buses,
+ * enumerate the buses, and configure any attached devices.
+ *
+ * There are two entry points here:
+ * 1) tile_pci_init
+ *    This sets up the pci_controller structs, and opens the
+ *    FDs to the hypervisor.  This is called from setup_arch() early
+ *    in the boot process.
+ * 2) pcibios_init
+ *    This probes the PCI bus(es) for any attached hardware.  It's
+ *    called by subsys_initcall.  All of the real work is done by the
+ *    generic Linux PCI layer.
+ *
+ */
+
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+int __write_once tile_plx_gen1;
+
+static struct pci_controller controllers[TILE_NUM_PCIE];
+static int num_controllers;
+
+static struct pci_ops tile_cfg_ops;
+
+
+/*
+ * We don't need to worry about the alignment of resources.
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+			    resource_size_t size, resource_size_t align)
+{
+	return res->start;
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Open a FD to the hypervisor PCI device.
+ *
+ * controller_id is the controller number, config type is 0 or 1 for
+ * config0 or config1 operations.
+ */
+static int __init tile_pcie_open(int controller_id, int config_type)
+{
+	char filename[32];
+	int fd;
+
+	sprintf(filename, "pcie/%d/config%d", controller_id, config_type);
+
+	fd = hv_dev_open((HV_VirtAddr)filename, 0);
+
+	return fd;
+}
+
+
+/*
+ * Get the IRQ numbers from the HV and set up the handlers for them.
+ */
+static int __init tile_init_irqs(int controller_id,
+				 struct pci_controller *controller)
+{
+	char filename[32];
+	int fd;
+	int ret;
+	int x;
+	struct pcie_rc_config rc_config;
+
+	sprintf(filename, "pcie/%d/ctl", controller_id);
+	fd = hv_dev_open((HV_VirtAddr)filename, 0);
+	if (fd < 0) {
+		pr_err("PCI: hv_dev_open(%s) failed\n", filename);
+		return -1;
+	}
+	ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config),
+			   sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF);
+	hv_dev_close(fd);
+	if (ret != sizeof(rc_config)) {
+		pr_err("PCI: wanted %zd bytes, got %d\n",
+		       sizeof(rc_config), ret);
+		return -1;
+	}
+	/* Record irq_base so that we can map INTx to IRQ # later. */
+	controller->irq_base = rc_config.intr;
+
+	for (x = 0; x < 4; x++)
+		tile_irq_activate(rc_config.intr + x,
+				  TILE_IRQ_HW_CLEAR);
+
+	if (rc_config.plx_gen1)
+		controller->plx_gen1 = 1;
+
+	return 0;
+}
+
+/*
+ * First initialization entry point, called from setup_arch().
+ *
+ * Find valid controllers and fill in pci_controller structs for each
+ * of them.
+ *
+ * Returns the number of controllers discovered.
+ */
+int __init tile_pci_init(void)
+{
+	int i;
+
+	pr_info("PCI: Searching for controllers...\n");
+
+	/* Do any configuration we need before using the PCIe */
+
+	for (i = 0; i < TILE_NUM_PCIE; i++) {
+		int hv_cfg_fd0 = -1;
+		int hv_cfg_fd1 = -1;
+		int hv_mem_fd = -1;
+		char name[32];
+		struct pci_controller *controller;
+
+		/*
+		 * Open the fd to the HV.  If it fails then this
+		 * device doesn't exist.
+		 */
+		hv_cfg_fd0 = tile_pcie_open(i, 0);
+		if (hv_cfg_fd0 < 0)
+			continue;
+		hv_cfg_fd1 = tile_pcie_open(i, 1);
+		if (hv_cfg_fd1 < 0) {
+			pr_err("PCI: Couldn't open config fd to HV "
+			    "for controller %d\n", i);
+			goto err_cont;
+		}
+
+		sprintf(name, "pcie/%d/mem", i);
+		hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
+		if (hv_mem_fd < 0) {
+			pr_err("PCI: Could not open mem fd to HV!\n");
+			goto err_cont;
+		}
+
+		pr_info("PCI: Found PCI controller #%d\n", i);
+
+		controller = &controllers[num_controllers];
+
+		if (tile_init_irqs(i, controller)) {
+			pr_err("PCI: Could not initialize "
+			       "IRQs, aborting.\n");
+			goto err_cont;
+		}
+
+		controller->index = num_controllers;
+		controller->hv_cfg_fd[0] = hv_cfg_fd0;
+		controller->hv_cfg_fd[1] = hv_cfg_fd1;
+		controller->hv_mem_fd = hv_mem_fd;
+		controller->first_busno = 0;
+		controller->last_busno = 0xff;
+		controller->ops = &tile_cfg_ops;
+
+		num_controllers++;
+		continue;
+
+err_cont:
+		if (hv_cfg_fd0 >= 0)
+			hv_dev_close(hv_cfg_fd0);
+		if (hv_cfg_fd1 >= 0)
+			hv_dev_close(hv_cfg_fd1);
+		if (hv_mem_fd >= 0)
+			hv_dev_close(hv_mem_fd);
+		continue;
+	}
+
+	/*
+	 * Before using the PCIe, see if we need to do any platform-specific
+	 * configuration, such as the PLX switch Gen 1 issue on TILEmpower.
+	 */
+	for (i = 0; i < num_controllers; i++) {
+		struct pci_controller *controller = &controllers[i];
+
+		if (controller->plx_gen1)
+			tile_plx_gen1 = 1;
+	}
+
+	return num_controllers;
+}
+
+/*
+ * (pin - 1) converts from the PCI standard's [1:4] convention to
+ * a normal [0:3] range.
+ */
+static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct pci_controller *controller =
+		(struct pci_controller *)dev->sysdata;
+	return (pin - 1) + controller->irq_base;
+}
+
+
+static void __init fixup_read_and_payload_sizes(void)
+{
+	struct pci_dev *dev = NULL;
+	int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
+	int max_read_size = 0x2; /* Limit to 512 byte reads. */
+	u16 new_values;
+
+	/* Scan for the smallest maximum payload size. */
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		int pcie_caps_offset;
+		u32 devcap;
+		int max_payload;
+
+		pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+		if (pcie_caps_offset == 0)
+			continue;
+
+		pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
+				      &devcap);
+		max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
+		if (max_payload < smallest_max_payload)
+			smallest_max_payload = max_payload;
+	}
+
+	/* Now, set the max_payload_size for all devices to that value. */
+	new_values = (max_read_size << 12) | (smallest_max_payload << 5);
+	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+		int pcie_caps_offset;
+		u16 devctl;
+
+		pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+		if (pcie_caps_offset == 0)
+			continue;
+
+		pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+				     &devctl);
+		devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
+		devctl |= new_values;
+		pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+				      devctl);
+	}
+}
+
+
+/*
+ * Second PCI initialization entry point, called by subsys_initcall.
+ *
+ * The controllers have been set up by the time we get here, by a call to
+ * tile_pci_init.
+ */
+static int __init pcibios_init(void)
+{
+	int i;
+
+	pr_info("PCI: Probing PCI hardware\n");
+
+	/*
+	 * Delay a bit in case devices aren't ready.  Some devices are
+	 * known to require at least 20ms here, but we use a more
+	 * conservative value.
+	 */
+	mdelay(250);
+
+	/* Scan all of the recorded PCI controllers.  */
+	for (i = 0; i < num_controllers; i++) {
+		struct pci_controller *controller = &controllers[i];
+		struct pci_bus *bus;
+
+		pr_info("PCI: initializing controller #%d\n", i);
+
+		/*
+		 * This comes from the generic Linux PCI driver.
+		 *
+		 * It reads the PCI tree for this bus into the Linux
+		 * data structures.
+		 *
+		 * This is inlined in linux/pci.h and calls into
+		 * pci_scan_bus_parented() in probe.c.
+		 */
+		bus = pci_scan_bus(0, controller->ops, controller);
+		controller->root_bus = bus;
+		controller->last_busno = bus->subordinate;
+
+	}
+
+	/* Do machine dependent PCI interrupt routing */
+	pci_fixup_irqs(pci_common_swizzle, tile_map_irq);
+
+	/*
+	 * This comes from the generic Linux PCI driver.
+	 *
+	 * It allocates all of the resources (I/O memory, etc)
+	 * associated with the devices read in above.
+	 */
+
+	pci_assign_unassigned_resources();
+
+	/* Configure the max_read_size and max_payload_size values. */
+	fixup_read_and_payload_sizes();
+
+	/* Record the I/O resources in the PCI controller structure. */
+	for (i = 0; i < num_controllers; i++) {
+		struct pci_bus *root_bus = controllers[i].root_bus;
+		struct pci_bus *next_bus;
+		struct pci_dev *dev;
+
+		list_for_each_entry(dev, &root_bus->devices, bus_list) {
+			/* Find the PCI host controller, ie. the 1st bridge. */
+			if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+				(PCI_SLOT(dev->devfn) == 0)) {
+				next_bus = dev->subordinate;
+				controllers[i].mem_resources[0] =
+					*next_bus->resource[0];
+				controllers[i].mem_resources[1] =
+					 *next_bus->resource[1];
+				controllers[i].mem_resources[2] =
+					 *next_bus->resource[2];
+
+				break;
+			}
+		}
+
+	}
+
+	return 0;
+}
+subsys_initcall(pcibios_init);
+
+/*
+ * No bus fixups needed.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+	/* Nothing needs to be done. */
+}
+
+/*
+ * This can be called from the generic PCI layer, but doesn't need to
+ * do anything.
+ */
+char __devinit *pcibios_setup(char *str)
+{
+	/* Nothing needs to be done. */
+	return str;
+}
+
+/*
+ * This is called from the generic Linux layer.
+ */
+void __init pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/*
+ * Enable memory and/or address decoding, as appropriate, for the
+ * device described by the 'dev' struct.
+ *
+ * This is called from the generic PCI layer, and can be called
+ * for bridges or endpoints.
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	u16 cmd, old_cmd;
+	u8 header_type;
+	int i;
+	struct resource *r;
+
+	pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
+	if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+		/*
+		 * For bridges, we enable both memory and I/O decoding
+		 * in call cases.
+		 */
+		cmd |= PCI_COMMAND_IO;
+		cmd |= PCI_COMMAND_MEMORY;
+	} else {
+		/*
+		 * For endpoints, we enable memory and/or I/O decoding
+		 * only if they have a memory resource of that type.
+		 */
+		for (i = 0; i < 6; i++) {
+			r = &dev->resource[i];
+			if (r->flags & IORESOURCE_UNSET) {
+				pr_err("PCI: Device %s not available "
+				       "because of resource collisions\n",
+				       pci_name(dev));
+				return -EINVAL;
+			}
+			if (r->flags & IORESOURCE_IO)
+				cmd |= PCI_COMMAND_IO;
+			if (r->flags & IORESOURCE_MEM)
+				cmd |= PCI_COMMAND_MEMORY;
+		}
+	}
+
+	/*
+	 * We only write the command if it changed.
+	 */
+	if (cmd != old_cmd)
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	return 0;
+}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+	unsigned long start = pci_resource_start(dev, bar);
+	unsigned long len = pci_resource_len(dev, bar);
+	unsigned long flags = pci_resource_flags(dev, bar);
+
+	if (!len)
+		return NULL;
+	if (max && len > max)
+		len = max;
+
+	if (!(flags & IORESOURCE_MEM)) {
+		pr_info("PCI: Trying to map invalid resource %#lx\n", flags);
+		start = 0;
+	}
+
+	return (void __iomem *)start;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+
+/****************************************************************
+ *
+ * Tile PCI config space read/write routines
+ *
+ ****************************************************************/
+
+/*
+ * These are the normal read and write ops
+ * These are expanded with macros from  pci_bus_read_config_byte() etc.
+ *
+ * devfn is the combined PCI slot & function.
+ *
+ * offset is in bytes, from the start of config space for the
+ * specified bus & slot.
+ */
+
+static int __devinit tile_cfg_read(struct pci_bus *bus,
+				   unsigned int devfn,
+				   int offset,
+				   int size,
+				   u32 *val)
+{
+	struct pci_controller *controller = bus->sysdata;
+	int busnum = bus->number & 0xff;
+	int slot = (devfn >> 3) & 0x1f;
+	int function = devfn & 0x7;
+	u32 addr;
+	int config_mode = 1;
+
+	/*
+	 * There is no bridge between the Tile and bus 0, so we
+	 * use config0 to talk to bus 0.
+	 *
+	 * If we're talking to a bus other than zero then we
+	 * must have found a bridge.
+	 */
+	if (busnum == 0) {
+		/*
+		 * We fake an empty slot for (busnum == 0) && (slot > 0),
+		 * since there is only one slot on bus 0.
+		 */
+		if (slot) {
+			*val = 0xFFFFFFFF;
+			return 0;
+		}
+		config_mode = 0;
+	}
+
+	addr = busnum << 20;		/* Bus in 27:20 */
+	addr |= slot << 15;		/* Slot (device) in 19:15 */
+	addr |= function << 12;		/* Function is in 14:12 */
+	addr |= (offset & 0xFFF);	/* byte address in 0:11 */
+
+	return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0,
+			    (HV_VirtAddr)(val), size, addr);
+}
+
+
+/*
+ * See tile_cfg_read() for relevent comments.
+ * Note that "val" is the value to write, not a pointer to that value.
+ */
+static int __devinit tile_cfg_write(struct pci_bus *bus,
+				    unsigned int devfn,
+				    int offset,
+				    int size,
+				    u32 val)
+{
+	struct pci_controller *controller = bus->sysdata;
+	int busnum = bus->number & 0xff;
+	int slot = (devfn >> 3) & 0x1f;
+	int function = devfn & 0x7;
+	u32 addr;
+	int config_mode = 1;
+	HV_VirtAddr valp = (HV_VirtAddr)&val;
+
+	/*
+	 * For bus 0 slot 0 we use config 0 accesses.
+	 */
+	if (busnum == 0) {
+		/*
+		 * We fake an empty slot for (busnum == 0) && (slot > 0),
+		 * since there is only one slot on bus 0.
+		 */
+		if (slot)
+			return 0;
+		config_mode = 0;
+	}
+
+	addr = busnum << 20;		/* Bus in 27:20 */
+	addr |= slot << 15;		/* Slot (device) in 19:15 */
+	addr |= function << 12;		/* Function is in 14:12 */
+	addr |= (offset & 0xFFF);	/* byte address in 0:11 */
+
+#ifdef __BIG_ENDIAN
+	/* Point to the correct part of the 32-bit "val". */
+	valp += 4 - size;
+#endif
+
+	return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0,
+			     valp, size, addr);
+}
+
+
+static struct pci_ops tile_cfg_ops = {
+	.read =         tile_cfg_read,
+	.write =        tile_cfg_write,
+};
+
+
+/*
+ * In the following, each PCI controller's mem_resources[1]
+ * represents its (non-prefetchable) PCI memory resource.
+ * mem_resources[0] and mem_resources[2] refer to its PCI I/O and
+ * prefetchable PCI memory resources, respectively.
+ * For more details, see pci_setup_bridge() in setup-bus.c.
+ * By comparing the target PCI memory address against the
+ * end address of controller 0, we can determine the controller
+ * that should accept the PCI memory access.
+ */
+#define TILE_READ(size, type)						\
+type _tile_read##size(unsigned long addr)				\
+{									\
+	type val;							\
+	int idx = 0;							\
+	if (addr > controllers[0].mem_resources[1].end &&		\
+	    addr > controllers[0].mem_resources[2].end)			\
+		idx = 1;                                                \
+	if (hv_dev_pread(controllers[idx].hv_mem_fd, 0,			\
+			 (HV_VirtAddr)(&val), sizeof(type), addr))	\
+		pr_err("PCI: read %zd bytes at 0x%lX failed\n",		\
+		       sizeof(type), addr);				\
+	return val;							\
+}									\
+EXPORT_SYMBOL(_tile_read##size)
+
+TILE_READ(b, u8);
+TILE_READ(w, u16);
+TILE_READ(l, u32);
+TILE_READ(q, u64);
+
+#define TILE_WRITE(size, type)						\
+void _tile_write##size(type val, unsigned long addr)			\
+{									\
+	int idx = 0;							\
+	if (addr > controllers[0].mem_resources[1].end &&		\
+	    addr > controllers[0].mem_resources[2].end)			\
+		idx = 1;                                                \
+	if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0,		\
+			  (HV_VirtAddr)(&val), sizeof(type), addr))	\
+		pr_err("PCI: write %zd bytes at 0x%lX failed\n",	\
+		       sizeof(type), addr);				\
+}									\
+EXPORT_SYMBOL(_tile_write##size)
+
+TILE_WRITE(b, u8);
+TILE_WRITE(w, u16);
+TILE_WRITE(l, u32);
+TILE_WRITE(q, u64);
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 8430f45daea..e90eb53173b 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -212,6 +212,13 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	childregs->sp = sp;  /* override with new user stack pointer */
 
 	/*
+	 * If CLONE_SETTLS is set, set "tp" in the new task to "r4",
+	 * which is passed in as arg #5 to sys_clone().
+	 */
+	if (clone_flags & CLONE_SETTLS)
+		childregs->tp = regs->regs[4];
+
+	/*
 	 * Copy the callee-saved registers from the passed pt_regs struct
 	 * into the context-switch callee-saved registers area.
 	 * This way when we start the interrupt-return sequence, the
@@ -539,6 +546,7 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
 	return __switch_to(prev, next, next_current_ksp0(next));
 }
 
+/* Note there is an implicit fifth argument if (clone_flags & CLONE_SETTLS). */
 SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp,
 		void __user *, parent_tidptr, void __user *, child_tidptr,
 		struct pt_regs *, regs)
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index fb0b3cbeae1..f18573643ed 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -840,7 +840,7 @@ static int __init topology_init(void)
 	for_each_online_node(i)
 		register_one_node(i);
 
-	for_each_present_cpu(i)
+	for (i = 0; i < smp_height * smp_width; ++i)
 		register_cpu(&cpu_devices[i], i);
 
 	return 0;
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index 687719d4abd..1260321155f 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -16,7 +16,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/errno.h>
@@ -53,7 +52,7 @@ SYSCALL_DEFINE3(sigaltstack, const stack_t __user *, uss,
  */
 
 int restore_sigcontext(struct pt_regs *regs,
-		       struct sigcontext __user *sc, long *pr0)
+		       struct sigcontext __user *sc)
 {
 	int err = 0;
 	int i;
@@ -76,17 +75,15 @@ int restore_sigcontext(struct pt_regs *regs,
 
 	regs->faultnum = INT_SWINT_1_SIGRETURN;
 
-	err |= __get_user(*pr0, &sc->gregs[0]);
 	return err;
 }
 
-/* sigreturn() returns long since it restores r0 in the interrupted code. */
+/* The assembly shim for this function arranges to ignore the return value. */
 SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
 {
 	struct rt_sigframe __user *frame =
 		(struct rt_sigframe __user *)(regs->sp);
 	sigset_t set;
-	long r0;
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
@@ -99,13 +96,13 @@ SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
 
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+	if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
 		goto badframe;
 
 	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
 		goto badframe;
 
-	return r0;
+	return 0;
 
 badframe:
 	force_sig(SIGSEGV, current);
diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c
index 74d62d098ed..b949edcec20 100644
--- a/arch/tile/kernel/smpboot.c
+++ b/arch/tile/kernel/smpboot.c
@@ -18,7 +18,6 @@
 #include <linux/mm.h>
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
-#include <linux/smp_lock.h>
 #include <linux/bootmem.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
diff --git a/arch/tile/kernel/sys.c b/arch/tile/kernel/sys.c
index 7e764669a02..e2187d24a9b 100644
--- a/arch/tile/kernel/sys.c
+++ b/arch/tile/kernel/sys.c
@@ -20,7 +20,6 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/mman.h>
 #include <linux/file.h>
diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c
index 6235283b485..cc3d9badf03 100644
--- a/arch/tile/lib/memchr_32.c
+++ b/arch/tile/lib/memchr_32.c
@@ -18,12 +18,24 @@
 
 void *memchr(const void *s, int c, size_t n)
 {
+	const uint32_t *last_word_ptr;
+	const uint32_t *p;
+	const char *last_byte_ptr;
+	uintptr_t s_int;
+	uint32_t goal, before_mask, v, bits;
+	char *ret;
+
+	if (__builtin_expect(n == 0, 0)) {
+		/* Don't dereference any memory if the array is empty. */
+		return NULL;
+	}
+
 	/* Get an aligned pointer. */
-	const uintptr_t s_int = (uintptr_t) s;
-	const uint32_t *p = (const uint32_t *)(s_int & -4);
+	s_int = (uintptr_t) s;
+	p = (const uint32_t *)(s_int & -4);
 
 	/* Create four copies of the byte for which we are looking. */
-	const uint32_t goal = 0x01010101 * (uint8_t) c;
+	goal = 0x01010101 * (uint8_t) c;
 
 	/* Read the first word, but munge it so that bytes before the array
 	 * will not match goal.
@@ -31,23 +43,14 @@ void *memchr(const void *s, int c, size_t n)
 	 * Note that this shift count expression works because we know
 	 * shift counts are taken mod 32.
 	 */
-	const uint32_t before_mask = (1 << (s_int << 3)) - 1;
-	uint32_t v = (*p | before_mask) ^ (goal & before_mask);
+	before_mask = (1 << (s_int << 3)) - 1;
+	v = (*p | before_mask) ^ (goal & before_mask);
 
 	/* Compute the address of the last byte. */
-	const char *const last_byte_ptr = (const char *)s + n - 1;
+	last_byte_ptr = (const char *)s + n - 1;
 
 	/* Compute the address of the word containing the last byte. */
-	const uint32_t *const last_word_ptr =
-	    (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
-
-	uint32_t bits;
-	char *ret;
-
-	if (__builtin_expect(n == 0, 0)) {
-		/* Don't dereference any memory if the array is empty. */
-		return NULL;
-	}
+	last_word_ptr = (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
 
 	while ((bits = __insn_seqb(v, goal)) == 0) {
 		if (__builtin_expect(p == last_word_ptr, 0)) {
diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c
index 485e24d62c6..5cd1c4004ec 100644
--- a/arch/tile/lib/spinlock_32.c
+++ b/arch/tile/lib/spinlock_32.c
@@ -167,23 +167,30 @@ void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val)
 	 * when we compare them.
 	 */
 	u32 my_ticket_;
+	u32 iterations = 0;
 
-	/* Take out the next ticket; this will also stop would-be readers. */
-	if (val & 1)
-		val = get_rwlock(rwlock);
-	rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
+	/*
+	 * Wait until there are no readers, then bump up the next
+	 * field and capture the ticket value.
+	 */
+	for (;;) {
+		if (!(val & 1)) {
+			if ((val >> RD_COUNT_SHIFT) == 0)
+				break;
+			rwlock->lock = val;
+		}
+		delay_backoff(iterations++);
+		val = __insn_tns((int *)&rwlock->lock);
+	}
 
-	/* Extract my ticket value from the original word. */
+	/* Take out the next ticket and extract my ticket value. */
+	rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
 	my_ticket_ = val >> WR_NEXT_SHIFT;
 
-	/*
-	 * Wait until the "current" field matches our ticket, and
-	 * there are no remaining readers.
-	 */
+	/* Wait until the "current" field matches our ticket. */
 	for (;;) {
 		u32 curr_ = val >> WR_CURR_SHIFT;
-		u32 readers = val >> RD_COUNT_SHIFT;
-		u32 delta = ((my_ticket_ - curr_) & WR_MASK) + !!readers;
+		u32 delta = ((my_ticket_ - curr_) & WR_MASK);
 		if (likely(delta == 0))
 			break;
 
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
index f295b4ac941..dcebfc831cd 100644
--- a/arch/tile/mm/fault.c
+++ b/arch/tile/mm/fault.c
@@ -24,7 +24,6 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/tty.h>
diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c
index 24688b697a8..201a582c413 100644
--- a/arch/tile/mm/hugetlbpage.c
+++ b/arch/tile/mm/hugetlbpage.c
@@ -21,7 +21,6 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/sysctl.h>
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 7f7338c9078..1664cce7b0a 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -727,6 +727,9 @@ struct winch {
 
 static void free_winch(struct winch *winch, int free_irq_ok)
 {
+	if (free_irq_ok)
+		free_irq(WINCH_IRQ, winch);
+
 	list_del(&winch->list);
 
 	if (winch->pid != -1)
@@ -735,8 +738,6 @@ static void free_winch(struct winch *winch, int free_irq_ok)
 		os_close_file(winch->fd);
 	if (winch->stack != 0)
 		free_stack(winch->stack, 0);
-	if (free_irq_ok)
-		free_irq(WINCH_IRQ, winch);
 	kfree(winch);
 }
 
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index 2cd899f75a3..b7c5bab9bd7 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -38,8 +38,8 @@ struct pt_regs {
 
 struct task_struct;
 
-extern long subarch_ptrace(struct task_struct *child, long request, long addr,
-			   long data);
+extern long subarch_ptrace(struct task_struct *child, long request,
+	unsigned long addr, unsigned long data);
 extern unsigned long getreg(struct task_struct *child, int regno);
 extern int putreg(struct task_struct *child, int regno, unsigned long value);
 extern int get_fpregs(struct user_i387_struct __user *buf,
diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c
index 340268be00b..09bd7b58572 100644
--- a/arch/um/kernel/exec.c
+++ b/arch/um/kernel/exec.c
@@ -5,7 +5,6 @@
 
 #include "linux/stddef.h"
 #include "linux/fs.h"
-#include "linux/smp_lock.h"
 #include "linux/ptrace.h"
 #include "linux/sched.h"
 #include "linux/slab.h"
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index a5e33f29bbe..701b672c112 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -122,7 +122,7 @@ long arch_ptrace(struct task_struct *child, long request,
 		break;
 
 	case PTRACE_SET_THREAD_AREA:
-		ret = ptrace_set_thread_area(child, addr, datavp);
+		ret = ptrace_set_thread_area(child, addr, vp);
 		break;
 
 	case PTRACE_FAULTINFO: {
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e8327686d3c..b6fccb07123 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -21,7 +21,7 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
-	select HAVE_PERF_EVENTS if (!M386 && !M486)
+	select HAVE_PERF_EVENTS
 	select HAVE_IRQ_WORK
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
@@ -377,6 +377,18 @@ config X86_ELAN
 
 	  If unsure, choose "PC-compatible" instead.
 
+config X86_INTEL_CE
+	bool "CE4100 TV platform"
+	depends on PCI
+	depends on PCI_GODIRECT
+	depends on X86_32
+	depends on X86_EXTENDED_PLATFORM
+	select X86_REBOOTFIXUPS
+	---help---
+	  Select for the Intel CE media processor (CE4100) SOC.
+	  This option compiles in support for the CE4100 SOC for settop
+	  boxes and media devices.
+
 config X86_MRST
        bool "Moorestown MID platform"
 	depends on PCI
@@ -385,6 +397,10 @@ config X86_MRST
 	depends on X86_EXTENDED_PLATFORM
 	depends on X86_IO_APIC
 	select APB_TIMER
+	select I2C
+	select SPI
+	select INTEL_SCU_IPC
+	select X86_PLATFORM_DEVICES
 	---help---
 	  Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin
 	  Internet Device(MID) platform. Moorestown consists of two chips:
@@ -466,6 +482,19 @@ config X86_ES7000
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
 
+config X86_32_IRIS
+	tristate "Eurobraille/Iris poweroff module"
+	depends on X86_32
+	---help---
+	  The Iris machines from EuroBraille do not have APM or ACPI support
+	  to shut themselves down properly.  A special I/O sequence is
+	  needed to do so, which is what this module does at
+	  kernel shutdown.
+
+	  This is only for Iris machines from EuroBraille.
+
+	  If unused, say N.
+
 config SCHED_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
@@ -1141,16 +1170,16 @@ config NUMA
 comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
 	depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
 
-config K8_NUMA
+config AMD_NUMA
 	def_bool y
 	prompt "Old style AMD Opteron NUMA detection"
 	depends on X86_64 && NUMA && PCI
 	---help---
-	  Enable K8 NUMA node topology detection.  You should say Y here if
-	  you have a multi processor AMD K8 system. This uses an old
-	  method to read the NUMA configuration directly from the builtin
-	  Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
-	  instead, which also takes priority if both are compiled in.
+	  Enable AMD NUMA node topology detection.  You should say Y here if
+	  you have a multi processor AMD system. This uses an old method to
+	  read the NUMA configuration directly from the builtin Northbridge
+	  of Opteron. It is recommended to use X86_64_ACPI_NUMA instead,
+	  which also takes priority if both are compiled in.
 
 config X86_64_ACPI_NUMA
 	def_bool y
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 2ac9069890c..15588a0ef46 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -310,6 +310,9 @@ config X86_INTERNODE_CACHE_SHIFT
 config X86_CMPXCHG
 	def_bool X86_64 || (X86_32 && !M386)
 
+config CMPXCHG_LOCAL
+	def_bool X86_64 || (X86_32 && !M386)
+
 config X86_L1_CACHE_SHIFT
 	int
 	default "7" if MPENTIUM4 || MPSC
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index b59ee765414..45143bbcfe5 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -117,6 +117,17 @@ config DEBUG_RODATA_TEST
 	  feature as well as for the change_page_attr() infrastructure.
 	  If in doubt, say "N"
 
+config DEBUG_SET_MODULE_RONX
+	bool "Set loadable kernel module data as NX and text as RO"
+	depends on MODULES
+	---help---
+	  This option helps catch unintended modifications to loadable
+	  kernel module's text and read-only data. It also prevents execution
+	  of module data. Such protection may interfere with run-time code
+	  patching and dynamic kernel tracing - and they might also protect
+	  against certain classes of kernel exploits.
+	  If in doubt, say "N".
+
 config DEBUG_NX_TEST
 	tristate "Testcase for the NX non-executable stack feature"
 	depends on DEBUG_KERNEL && m
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 52f85a196fa..35af09d13dc 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -182,7 +182,7 @@ no_longmode:
 	hlt
 	jmp     1b
 
-#include "../../kernel/verify_cpu_64.S"
+#include "../../kernel/verify_cpu.S"
 
 	/*
 	 * Be careful here startup_64 needs to be at a predictable
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 23f315c9f21..325c05294fc 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -355,7 +355,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 	if (heap > 0x3fffffffffffUL)
 		error("Destination address too large");
 #else
-	if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
+	if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
 		error("Destination address too large");
 #endif
 #ifndef CONFIG_RELOCATABLE
diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c
index cbcc8d8ea93..7a6e68e4f74 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -10,6 +10,7 @@
  * by the Free Software Foundation.
  */
 
+#include <linux/err.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index 849813f398e..5852519b2d0 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -28,7 +28,6 @@
 #include <linux/syscalls.h>
 #include <linux/times.h>
 #include <linux/utsname.h>
-#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/uio.h>
 #include <linux/poll.h>
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 76561d20ea2..13009d1af99 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -66,6 +66,7 @@ extern void alternatives_smp_module_add(struct module *mod, char *name,
 extern void alternatives_smp_module_del(struct module *mod);
 extern void alternatives_smp_switch(int smp);
 extern int alternatives_text_reserved(void *start, void *end);
+extern bool skip_smp_alternatives;
 #else
 static inline void alternatives_smp_module_add(struct module *mod, char *name,
 					       void *locks, void *locks_end,
@@ -180,8 +181,15 @@ extern void *text_poke_early(void *addr, const void *opcode, size_t len);
  * On the local CPU you need to be protected again NMI or MCE handlers seeing an
  * inconsistent instruction while you patch.
  */
+struct text_poke_param {
+	void *addr;
+	const void *opcode;
+	size_t len;
+};
+
 extern void *text_poke(void *addr, const void *opcode, size_t len);
 extern void *text_poke_smp(void *addr, const void *opcode, size_t len);
+extern void text_poke_smp_batch(struct text_poke_param *params, int n);
 
 #if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
 #define IDEAL_NOP_SIZE_5 5
diff --git a/arch/x86/include/asm/amd_nb.h b/arch/x86/include/asm/amd_nb.h
index c8517f81b21..6aee50d655d 100644
--- a/arch/x86/include/asm/amd_nb.h
+++ b/arch/x86/include/asm/amd_nb.h
@@ -3,36 +3,53 @@
 
 #include <linux/pci.h>
 
-extern struct pci_device_id k8_nb_ids[];
+extern struct pci_device_id amd_nb_misc_ids[];
 struct bootnode;
 
-extern int early_is_k8_nb(u32 value);
-extern int cache_k8_northbridges(void);
-extern void k8_flush_garts(void);
-extern int k8_get_nodes(struct bootnode *nodes);
-extern int k8_numa_init(unsigned long start_pfn, unsigned long end_pfn);
-extern int k8_scan_nodes(void);
+extern int early_is_amd_nb(u32 value);
+extern int amd_cache_northbridges(void);
+extern void amd_flush_garts(void);
+extern int amd_get_nodes(struct bootnode *nodes);
+extern int amd_numa_init(unsigned long start_pfn, unsigned long end_pfn);
+extern int amd_scan_nodes(void);
 
-struct k8_northbridge_info {
+struct amd_northbridge {
+	struct pci_dev *misc;
+};
+
+struct amd_northbridge_info {
 	u16 num;
-	u8 gart_supported;
-	struct pci_dev **nb_misc;
+	u64 flags;
+	struct amd_northbridge *nb;
 };
-extern struct k8_northbridge_info k8_northbridges;
+extern struct amd_northbridge_info amd_northbridges;
+
+#define AMD_NB_GART			0x1
+#define AMD_NB_L3_INDEX_DISABLE		0x2
 
 #ifdef CONFIG_AMD_NB
 
-static inline struct pci_dev *node_to_k8_nb_misc(int node)
+static inline int amd_nb_num(void)
 {
-	return (node < k8_northbridges.num) ? k8_northbridges.nb_misc[node] : NULL;
+	return amd_northbridges.num;
 }
 
-#else
+static inline int amd_nb_has_feature(int feature)
+{
+	return ((amd_northbridges.flags & feature) == feature);
+}
 
-static inline struct pci_dev *node_to_k8_nb_misc(int node)
+static inline struct amd_northbridge *node_to_amd_nb(int node)
 {
-	return NULL;
+	return (node < amd_northbridges.num) ? &amd_northbridges.nb[node] : NULL;
 }
+
+#else
+
+#define amd_nb_num(x)		0
+#define amd_nb_has_feature(x)	false
+#define node_to_amd_nb(x)	NULL
+
 #endif
 
 
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 286de34b0ed..5e3969c36d7 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -141,13 +141,13 @@ static inline void native_apic_msr_write(u32 reg, u32 v)
 
 static inline u32 native_apic_msr_read(u32 reg)
 {
-	u32 low, high;
+	u64 msr;
 
 	if (reg == APIC_DFR)
 		return -1;
 
-	rdmsr(APIC_BASE_MSR + (reg >> 4), low, high);
-	return low;
+	rdmsrl(APIC_BASE_MSR + (reg >> 4), msr);
+	return (u32)msr;
 }
 
 static inline void native_x2apic_wait_icr_idle(void)
@@ -181,12 +181,12 @@ extern void enable_x2apic(void);
 extern void x2apic_icr_write(u32 low, u32 id);
 static inline int x2apic_enabled(void)
 {
-	int msr, msr2;
+	u64 msr;
 
 	if (!cpu_has_x2apic)
 		return 0;
 
-	rdmsr(MSR_IA32_APICBASE, msr, msr2);
+	rdmsrl(MSR_IA32_APICBASE, msr);
 	if (msr & X2APIC_ENABLE)
 		return 1;
 	return 0;
@@ -234,16 +234,17 @@ extern void init_bsp_APIC(void);
 extern void setup_local_APIC(void);
 extern void end_local_APIC_setup(void);
 extern void init_apic_mappings(void);
+void register_lapic_address(unsigned long address);
 extern void setup_boot_APIC_clock(void);
 extern void setup_secondary_APIC_clock(void);
 extern int APIC_init_uniprocessor(void);
 extern void enable_NMI_through_LVT0(void);
+extern int apic_force_enable(void);
 
 /*
  * On 32bit this is mach-xxx local
  */
 #ifdef CONFIG_X86_64
-extern void early_init_lapic_mapping(void);
 extern int apic_is_clustered_box(void);
 #else
 static inline int apic_is_clustered_box(void)
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index a859ca461fb..47a30ff8e51 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -145,6 +145,7 @@
 
 #ifdef CONFIG_X86_32
 # define MAX_IO_APICS 64
+# define MAX_LOCAL_APIC 256
 #else
 # define MAX_IO_APICS 128
 # define MAX_LOCAL_APIC 32768
diff --git a/arch/x86/include/asm/bootparam.h b/arch/x86/include/asm/bootparam.h
index 8e6218550e7..c8bfe63a06d 100644
--- a/arch/x86/include/asm/bootparam.h
+++ b/arch/x86/include/asm/bootparam.h
@@ -124,6 +124,7 @@ enum {
 	X86_SUBARCH_LGUEST,
 	X86_SUBARCH_XEN,
 	X86_SUBARCH_MRST,
+	X86_SUBARCH_CE4100,
 	X86_NR_SUBARCHS,
 };
 
diff --git a/arch/x86/include/asm/debugreg.h b/arch/x86/include/asm/debugreg.h
index b81002f2361..078ad0caefc 100644
--- a/arch/x86/include/asm/debugreg.h
+++ b/arch/x86/include/asm/debugreg.h
@@ -94,7 +94,7 @@ static inline void hw_breakpoint_disable(void)
 
 static inline int hw_breakpoint_active(void)
 {
-	return __get_cpu_var(cpu_dr7) & DR_GLOBAL_ENABLE_MASK;
+	return __this_cpu_read(cpu_dr7) & DR_GLOBAL_ENABLE_MASK;
 }
 
 extern void aout_dump_debugregs(struct user *dump);
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index 5be1542fbfa..e99d55d74df 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -72,6 +72,9 @@ struct e820map {
 #define BIOS_BEGIN		0x000a0000
 #define BIOS_END		0x00100000
 
+#define BIOS_ROM_BASE		0xffe00000
+#define BIOS_ROM_END		0xffffffff
+
 #ifdef __KERNEL__
 /* see comment in arch/x86/kernel/e820.c */
 extern struct e820map e820;
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 4d293dced62..0141b234406 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -117,6 +117,10 @@ enum fixed_addresses {
 	FIX_TEXT_POKE1,	/* reserve 2 pages for text_poke() */
 	FIX_TEXT_POKE0, /* first page is last, because allocation is backward */
 	__end_of_permanent_fixed_addresses,
+
+#ifdef	CONFIG_X86_MRST
+	FIX_LNW_VRTC,
+#endif
 	/*
 	 * 256 temporary boot-time mappings, used by early_ioremap(),
 	 * before ioremap() is functional.
@@ -216,8 +220,8 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
 }
 
 /* Return an pointer with offset calculated */
-static inline unsigned long __set_fixmap_offset(enum fixed_addresses idx,
-				phys_addr_t phys, pgprot_t flags)
+static __always_inline unsigned long
+__set_fixmap_offset(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
 {
 	__set_fixmap(idx, phys, flags);
 	return fix_to_virt(idx) + (phys & (PAGE_SIZE - 1));
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 4aa2bb3b242..ef328901c80 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -93,6 +93,17 @@ static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
 	int err;
 
 	/* See comment in fxsave() below. */
+#ifdef CONFIG_AS_FXSAVEQ
+	asm volatile("1:  fxrstorq %[fx]\n\t"
+		     "2:\n"
+		     ".section .fixup,\"ax\"\n"
+		     "3:  movl $-1,%[err]\n"
+		     "    jmp  2b\n"
+		     ".previous\n"
+		     _ASM_EXTABLE(1b, 3b)
+		     : [err] "=r" (err)
+		     : [fx] "m" (*fx), "0" (0));
+#else
 	asm volatile("1:  rex64/fxrstor (%[fx])\n\t"
 		     "2:\n"
 		     ".section .fixup,\"ax\"\n"
@@ -102,6 +113,7 @@ static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
 		     _ASM_EXTABLE(1b, 3b)
 		     : [err] "=r" (err)
 		     : [fx] "R" (fx), "m" (*fx), "0" (0));
+#endif
 	return err;
 }
 
@@ -119,6 +131,17 @@ static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
 		return -EFAULT;
 
 	/* See comment in fxsave() below. */
+#ifdef CONFIG_AS_FXSAVEQ
+	asm volatile("1:  fxsaveq %[fx]\n\t"
+		     "2:\n"
+		     ".section .fixup,\"ax\"\n"
+		     "3:  movl $-1,%[err]\n"
+		     "    jmp  2b\n"
+		     ".previous\n"
+		     _ASM_EXTABLE(1b, 3b)
+		     : [err] "=r" (err), [fx] "=m" (*fx)
+		     : "0" (0));
+#else
 	asm volatile("1:  rex64/fxsave (%[fx])\n\t"
 		     "2:\n"
 		     ".section .fixup,\"ax\"\n"
@@ -128,6 +151,7 @@ static inline int fxsave_user(struct i387_fxsave_struct __user *fx)
 		     _ASM_EXTABLE(1b, 3b)
 		     : [err] "=r" (err), "=m" (*fx)
 		     : [fx] "R" (fx), "0" (0));
+#endif
 	if (unlikely(err) &&
 	    __clear_user(fx, sizeof(struct i387_fxsave_struct)))
 		err = -EFAULT;
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index a6b28d017c2..f327d386d6c 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -159,7 +159,7 @@ struct io_apic_irq_attr;
 extern int io_apic_set_pci_routing(struct device *dev, int irq,
 		 struct io_apic_irq_attr *irq_attr);
 void setup_IO_APIC_irq_extra(u32 gsi);
-extern void ioapic_init_mappings(void);
+extern void ioapic_and_gsi_init(void);
 extern void ioapic_insert_resources(void);
 
 extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
@@ -168,10 +168,10 @@ extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
 extern void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
 extern int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
 
-extern void probe_nr_irqs_gsi(void);
 extern int get_nr_irqs_gsi(void);
 
 extern void setup_ioapic_ids_from_mpc(void);
+extern void setup_ioapic_ids_from_mpc_nocheck(void);
 
 struct mp_ioapic_gsi{
 	u32 gsi_base;
@@ -184,14 +184,15 @@ int mp_find_ioapic_pin(int ioapic, u32 gsi);
 void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
 extern void __init pre_init_apic_IRQ0(void);
 
+extern void mp_save_irq(struct mpc_intsrc *m);
+
 #else  /* !CONFIG_X86_IO_APIC */
 
 #define io_apic_assign_pci_irqs 0
 #define setup_ioapic_ids_from_mpc x86_init_noop
 static const int timer_through_8259 = 0;
-static inline void ioapic_init_mappings(void)	{ }
+static inline void ioapic_and_gsi_init(void) { }
 static inline void ioapic_insert_resources(void) { }
-static inline void probe_nr_irqs_gsi(void)	{ }
 #define gsi_top (NR_IRQS_LEGACY)
 static inline int mp_find_ioapic(u32 gsi) { return 0; }
 
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index 13b0ebaa512..ba870bb6dd8 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -15,10 +15,6 @@ static inline int irq_canonicalize(int irq)
 	return ((irq == 2) ? 9 : irq);
 }
 
-#ifdef CONFIG_X86_LOCAL_APIC
-# define ARCH_HAS_NMI_WATCHDOG
-#endif
-
 #ifdef CONFIG_X86_32
 extern void irq_ctx_init(int cpu);
 #else
diff --git a/arch/x86/include/asm/kdebug.h b/arch/x86/include/asm/kdebug.h
index 5bdfca86581..f23eb252846 100644
--- a/arch/x86/include/asm/kdebug.h
+++ b/arch/x86/include/asm/kdebug.h
@@ -28,7 +28,7 @@ extern void die(const char *, struct pt_regs *,long);
 extern int __must_check __die(const char *, struct pt_regs *, long);
 extern void show_registers(struct pt_regs *regs);
 extern void show_trace(struct task_struct *t, struct pt_regs *regs,
-		       unsigned long *sp, unsigned long bp);
+		       unsigned long *sp);
 extern void __show_regs(struct pt_regs *regs, int all);
 extern void show_regs(struct pt_regs *regs);
 extern unsigned long oops_begin(void);
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 9e6fe391094..f702f82aa1e 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -79,7 +79,7 @@
 #define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT)
 #define KVM_MIN_FREE_MMU_PAGES 5
 #define KVM_REFILL_PAGES 25
-#define KVM_MAX_CPUID_ENTRIES 40
+#define KVM_MAX_CPUID_ENTRIES 80
 #define KVM_NR_FIXED_MTRR_REGION 88
 #define KVM_NR_VAR_MTRR 8
 
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index c62c13cb978..eb16e94ae04 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -223,6 +223,9 @@ void intel_init_thermal(struct cpuinfo_x86 *c);
 
 void mce_log_therm_throt_event(__u64 status);
 
+/* Interrupt Handler for core thermal thresholds */
+extern int (*platform_thermal_notify)(__u64 msr_val);
+
 #ifdef CONFIG_X86_THERMAL_VECTOR
 extern void mcheck_intel_therm_init(void);
 #else
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index ef51b501e22..24215072d0e 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -48,6 +48,12 @@ static inline struct microcode_ops * __init init_intel_microcode(void)
 
 #ifdef CONFIG_MICROCODE_AMD
 extern struct microcode_ops * __init init_amd_microcode(void);
+
+static inline void get_ucode_data(void *to, const u8 *from, size_t n)
+{
+	memcpy(to, from, n);
+}
+
 #else
 static inline struct microcode_ops * __init init_amd_microcode(void)
 {
diff --git a/arch/x86/include/asm/mpspec.h b/arch/x86/include/asm/mpspec.h
index c82868e9f90..0c90dd9f050 100644
--- a/arch/x86/include/asm/mpspec.h
+++ b/arch/x86/include/asm/mpspec.h
@@ -5,8 +5,9 @@
 
 #include <asm/mpspec_def.h>
 #include <asm/x86_init.h>
+#include <asm/apicdef.h>
 
-extern int apic_version[MAX_APICS];
+extern int apic_version[];
 extern int pic_mode;
 
 #ifdef CONFIG_X86_32
@@ -107,7 +108,7 @@ extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
 				 int active_high_low);
 #endif /* CONFIG_ACPI */
 
-#define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
+#define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_LOCAL_APIC)
 
 struct physid_mask {
 	unsigned long mask[PHYSID_ARRAY_SIZE];
@@ -122,31 +123,31 @@ typedef struct physid_mask physid_mask_t;
 	test_and_set_bit(physid, (map).mask)
 
 #define physids_and(dst, src1, src2)					\
-	bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+	bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_LOCAL_APIC)
 
 #define physids_or(dst, src1, src2)					\
-	bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+	bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_LOCAL_APIC)
 
 #define physids_clear(map)					\
-	bitmap_zero((map).mask, MAX_APICS)
+	bitmap_zero((map).mask, MAX_LOCAL_APIC)
 
 #define physids_complement(dst, src)				\
-	bitmap_complement((dst).mask, (src).mask, MAX_APICS)
+	bitmap_complement((dst).mask, (src).mask, MAX_LOCAL_APIC)
 
 #define physids_empty(map)					\
-	bitmap_empty((map).mask, MAX_APICS)
+	bitmap_empty((map).mask, MAX_LOCAL_APIC)
 
 #define physids_equal(map1, map2)				\
-	bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
+	bitmap_equal((map1).mask, (map2).mask, MAX_LOCAL_APIC)
 
 #define physids_weight(map)					\
-	bitmap_weight((map).mask, MAX_APICS)
+	bitmap_weight((map).mask, MAX_LOCAL_APIC)
 
 #define physids_shift_right(d, s, n)				\
-	bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
+	bitmap_shift_right((d).mask, (s).mask, n, MAX_LOCAL_APIC)
 
 #define physids_shift_left(d, s, n)				\
-	bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
+	bitmap_shift_left((d).mask, (s).mask, n, MAX_LOCAL_APIC)
 
 static inline unsigned long physids_coerce(physid_mask_t *map)
 {
@@ -159,14 +160,6 @@ static inline void physids_promote(unsigned long physids, physid_mask_t *map)
 	map->mask[0] = physids;
 }
 
-/* Note: will create very large stack frames if physid_mask_t is big */
-#define physid_mask_of_physid(physid)					\
-	({								\
-		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
-		physid_set(physid, __physid_mask);			\
-		__physid_mask;						\
-	})
-
 static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
 {
 	physids_clear(*map);
diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h
index 4a7f96d7c18..c0a955a9a08 100644
--- a/arch/x86/include/asm/mpspec_def.h
+++ b/arch/x86/include/asm/mpspec_def.h
@@ -15,13 +15,6 @@
 
 #ifdef CONFIG_X86_32
 # define MAX_MPC_ENTRY 1024
-# define MAX_APICS      256
-#else
-# if NR_CPUS <= 255
-#  define MAX_APICS     255
-# else
-#  define MAX_APICS   32768
-# endif
 #endif
 
 /* Intel MP Floating Pointer Structure */
diff --git a/arch/x86/include/asm/mrst-vrtc.h b/arch/x86/include/asm/mrst-vrtc.h
new file mode 100644
index 00000000000..73668abdbed
--- /dev/null
+++ b/arch/x86/include/asm/mrst-vrtc.h
@@ -0,0 +1,9 @@
+#ifndef _MRST_VRTC_H
+#define _MRST_VRTC_H
+
+extern unsigned char vrtc_cmos_read(unsigned char reg);
+extern void vrtc_cmos_write(unsigned char val, unsigned char reg);
+extern unsigned long vrtc_get_time(void);
+extern int vrtc_set_mmss(unsigned long nowtime);
+
+#endif
diff --git a/arch/x86/include/asm/mrst.h b/arch/x86/include/asm/mrst.h
index 4a711a684b1..719f00b28ff 100644
--- a/arch/x86/include/asm/mrst.h
+++ b/arch/x86/include/asm/mrst.h
@@ -14,7 +14,9 @@
 #include <linux/sfi.h>
 
 extern int pci_mrst_init(void);
-int __init sfi_parse_mrtc(struct sfi_table_header *table);
+extern int __init sfi_parse_mrtc(struct sfi_table_header *table);
+extern int sfi_mrtc_num;
+extern struct sfi_rtc_table_entry sfi_mrtc_array[];
 
 /*
  * Medfield is the follow-up of Moorestown, it combines two chip solution into
@@ -50,4 +52,14 @@ extern void mrst_early_console_init(void);
 
 extern struct console early_hsu_console;
 extern void hsu_early_console_init(void);
+
+extern void intel_scu_devices_create(void);
+extern void intel_scu_devices_destroy(void);
+
+/* VRTC timer */
+#define MRST_VRTC_MAP_SZ	(1024)
+/*#define MRST_VRTC_PGOFFSET	(0xc00) */
+
+extern void mrst_rtc_init(void);
+
 #endif /* _ASM_X86_MRST_H */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 3ea3dc48704..4d0dfa0d998 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -123,12 +123,16 @@
 #define MSR_AMD64_IBSCTL		0xc001103a
 #define MSR_AMD64_IBSBRTARGET		0xc001103b
 
+/* Fam 15h MSRs */
+#define MSR_F15H_PERF_CTL		0xc0010200
+#define MSR_F15H_PERF_CTR		0xc0010201
+
 /* Fam 10h MSRs */
 #define MSR_FAM10H_MMIO_CONF_BASE	0xc0010058
 #define FAM10H_MMIO_CONF_ENABLE		(1<<0)
 #define FAM10H_MMIO_CONF_BUSRANGE_MASK	0xf
 #define FAM10H_MMIO_CONF_BUSRANGE_SHIFT 2
-#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffff
+#define FAM10H_MMIO_CONF_BASE_MASK	0xfffffffULL
 #define FAM10H_MMIO_CONF_BASE_SHIFT	20
 #define MSR_FAM10H_NODE_ID		0xc001100c
 
@@ -253,6 +257,18 @@
 #define PACKAGE_THERM_INT_LOW_ENABLE		(1 << 1)
 #define PACKAGE_THERM_INT_PLN_ENABLE		(1 << 24)
 
+/* Thermal Thresholds Support */
+#define THERM_INT_THRESHOLD0_ENABLE    (1 << 15)
+#define THERM_SHIFT_THRESHOLD0        8
+#define THERM_MASK_THRESHOLD0          (0x7f << THERM_SHIFT_THRESHOLD0)
+#define THERM_INT_THRESHOLD1_ENABLE    (1 << 23)
+#define THERM_SHIFT_THRESHOLD1        16
+#define THERM_MASK_THRESHOLD1          (0x7f << THERM_SHIFT_THRESHOLD1)
+#define THERM_STATUS_THRESHOLD0        (1 << 6)
+#define THERM_LOG_THRESHOLD0           (1 << 7)
+#define THERM_STATUS_THRESHOLD1        (1 << 8)
+#define THERM_LOG_THRESHOLD1           (1 << 9)
+
 /* MISC_ENABLE bits: architectural */
 #define MSR_IA32_MISC_ENABLE_FAST_STRING	(1ULL << 0)
 #define MSR_IA32_MISC_ENABLE_TCC		(1ULL << 1)
diff --git a/arch/x86/include/asm/nmi.h b/arch/x86/include/asm/nmi.h
index 932f0f86b4b..c4021b95351 100644
--- a/arch/x86/include/asm/nmi.h
+++ b/arch/x86/include/asm/nmi.h
@@ -5,41 +5,15 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#ifdef ARCH_HAS_NMI_WATCHDOG
-
-/**
- * do_nmi_callback
- *
- * Check to see if a callback exists and execute it.  Return 1
- * if the handler exists and was handled successfully.
- */
-int do_nmi_callback(struct pt_regs *regs, int cpu);
+#ifdef CONFIG_X86_LOCAL_APIC
 
 extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
-extern int check_nmi_watchdog(void);
-#if !defined(CONFIG_LOCKUP_DETECTOR)
-extern int nmi_watchdog_enabled;
-#endif
 extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);
 extern int reserve_perfctr_nmi(unsigned int);
 extern void release_perfctr_nmi(unsigned int);
 extern int reserve_evntsel_nmi(unsigned int);
 extern void release_evntsel_nmi(unsigned int);
 
-extern void setup_apic_nmi_watchdog(void *);
-extern void stop_apic_nmi_watchdog(void *);
-extern void disable_timer_nmi_watchdog(void);
-extern void enable_timer_nmi_watchdog(void);
-extern int nmi_watchdog_tick(struct pt_regs *regs, unsigned reason);
-extern void cpu_nmi_set_wd_enabled(void);
-
-extern atomic_t nmi_active;
-extern unsigned int nmi_watchdog;
-#define NMI_NONE	0
-#define NMI_IO_APIC	1
-#define NMI_LOCAL_APIC	2
-#define NMI_INVALID	3
-
 struct ctl_table;
 extern int proc_nmi_enabled(struct ctl_table *, int ,
 			void __user *, size_t *, loff_t *);
@@ -47,33 +21,8 @@ extern int unknown_nmi_panic;
 
 void arch_trigger_all_cpu_backtrace(void);
 #define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
-
-static inline void localise_nmi_watchdog(void)
-{
-	if (nmi_watchdog == NMI_IO_APIC)
-		nmi_watchdog = NMI_LOCAL_APIC;
-}
-
-/* check if nmi_watchdog is active (ie was specified at boot) */
-static inline int nmi_watchdog_active(void)
-{
-	/*
-	 * actually it should be:
-	 * 	return (nmi_watchdog == NMI_LOCAL_APIC ||
-	 * 		nmi_watchdog == NMI_IO_APIC)
-	 * but since they are power of two we could use a
-	 * cheaper way --cvg
-	 */
-	return nmi_watchdog & (NMI_LOCAL_APIC | NMI_IO_APIC);
-}
 #endif
 
-void lapic_watchdog_stop(void);
-int lapic_watchdog_init(unsigned nmi_hz);
-int lapic_wd_event(unsigned nmi_hz);
-unsigned lapic_adjust_nmi_hz(unsigned hz);
-void disable_lapic_nmi_watchdog(void);
-void enable_lapic_nmi_watchdog(void);
 void stop_nmi(void);
 void restart_nmi(void);
 
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 18e3b8a8709..7709c12431b 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -112,7 +112,7 @@ static inline void arch_safe_halt(void)
 
 static inline void halt(void)
 {
-	PVOP_VCALL0(pv_irq_ops.safe_halt);
+	PVOP_VCALL0(pv_irq_ops.halt);
 }
 
 static inline void wbinvd(void)
@@ -824,27 +824,27 @@ static __always_inline void arch_spin_unlock(struct arch_spinlock *lock)
 #define __PV_IS_CALLEE_SAVE(func)			\
 	((struct paravirt_callee_save) { func })
 
-static inline unsigned long arch_local_save_flags(void)
+static inline notrace unsigned long arch_local_save_flags(void)
 {
 	return PVOP_CALLEE0(unsigned long, pv_irq_ops.save_fl);
 }
 
-static inline void arch_local_irq_restore(unsigned long f)
+static inline notrace void arch_local_irq_restore(unsigned long f)
 {
 	PVOP_VCALLEE1(pv_irq_ops.restore_fl, f);
 }
 
-static inline void arch_local_irq_disable(void)
+static inline notrace void arch_local_irq_disable(void)
 {
 	PVOP_VCALLEE0(pv_irq_ops.irq_disable);
 }
 
-static inline void arch_local_irq_enable(void)
+static inline notrace void arch_local_irq_enable(void)
 {
 	PVOP_VCALLEE0(pv_irq_ops.irq_enable);
 }
 
-static inline unsigned long arch_local_irq_save(void)
+static inline notrace unsigned long arch_local_irq_save(void)
 {
 	unsigned long f;
 
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index ca0437c714b..67612922963 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -65,6 +65,7 @@ extern unsigned long pci_mem_start;
 
 #define PCIBIOS_MIN_CARDBUS_IO	0x4000
 
+extern int pcibios_enabled;
 void pcibios_config_init(void);
 struct pci_bus *pcibios_scan_root(int bus);
 
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index f899e01a8ac..8ee45167e81 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -230,6 +230,125 @@ do {									\
 })
 
 /*
+ * Add return operation
+ */
+#define percpu_add_return_op(var, val)					\
+({									\
+	typeof(var) paro_ret__ = val;					\
+	switch (sizeof(var)) {						\
+	case 1:								\
+		asm("xaddb %0, "__percpu_arg(1)				\
+			    : "+q" (paro_ret__), "+m" (var)		\
+			    : : "memory");				\
+		break;							\
+	case 2:								\
+		asm("xaddw %0, "__percpu_arg(1)				\
+			    : "+r" (paro_ret__), "+m" (var)		\
+			    : : "memory");				\
+		break;							\
+	case 4:								\
+		asm("xaddl %0, "__percpu_arg(1)				\
+			    : "+r" (paro_ret__), "+m" (var)		\
+			    : : "memory");				\
+		break;							\
+	case 8:								\
+		asm("xaddq %0, "__percpu_arg(1)				\
+			    : "+re" (paro_ret__), "+m" (var)		\
+			    : : "memory");				\
+		break;							\
+	default: __bad_percpu_size();					\
+	}								\
+	paro_ret__ += val;						\
+	paro_ret__;							\
+})
+
+/*
+ * xchg is implemented using cmpxchg without a lock prefix. xchg is
+ * expensive due to the implied lock prefix.  The processor cannot prefetch
+ * cachelines if xchg is used.
+ */
+#define percpu_xchg_op(var, nval)					\
+({									\
+	typeof(var) pxo_ret__;						\
+	typeof(var) pxo_new__ = (nval);					\
+	switch (sizeof(var)) {						\
+	case 1:								\
+		asm("\n1:mov "__percpu_arg(1)",%%al"			\
+		    "\n\tcmpxchgb %2, "__percpu_arg(1)			\
+		    "\n\tjnz 1b"					\
+			    : "=a" (pxo_ret__), "+m" (var)		\
+			    : "q" (pxo_new__)				\
+			    : "memory");				\
+		break;							\
+	case 2:								\
+		asm("\n1:mov "__percpu_arg(1)",%%ax"			\
+		    "\n\tcmpxchgw %2, "__percpu_arg(1)			\
+		    "\n\tjnz 1b"					\
+			    : "=a" (pxo_ret__), "+m" (var)		\
+			    : "r" (pxo_new__)				\
+			    : "memory");				\
+		break;							\
+	case 4:								\
+		asm("\n1:mov "__percpu_arg(1)",%%eax"			\
+		    "\n\tcmpxchgl %2, "__percpu_arg(1)			\
+		    "\n\tjnz 1b"					\
+			    : "=a" (pxo_ret__), "+m" (var)		\
+			    : "r" (pxo_new__)				\
+			    : "memory");				\
+		break;							\
+	case 8:								\
+		asm("\n1:mov "__percpu_arg(1)",%%rax"			\
+		    "\n\tcmpxchgq %2, "__percpu_arg(1)			\
+		    "\n\tjnz 1b"					\
+			    : "=a" (pxo_ret__), "+m" (var)		\
+			    : "r" (pxo_new__)				\
+			    : "memory");				\
+		break;							\
+	default: __bad_percpu_size();					\
+	}								\
+	pxo_ret__;							\
+})
+
+/*
+ * cmpxchg has no such implied lock semantics as a result it is much
+ * more efficient for cpu local operations.
+ */
+#define percpu_cmpxchg_op(var, oval, nval)				\
+({									\
+	typeof(var) pco_ret__;						\
+	typeof(var) pco_old__ = (oval);					\
+	typeof(var) pco_new__ = (nval);					\
+	switch (sizeof(var)) {						\
+	case 1:								\
+		asm("cmpxchgb %2, "__percpu_arg(1)			\
+			    : "=a" (pco_ret__), "+m" (var)		\
+			    : "q" (pco_new__), "0" (pco_old__)		\
+			    : "memory");				\
+		break;							\
+	case 2:								\
+		asm("cmpxchgw %2, "__percpu_arg(1)			\
+			    : "=a" (pco_ret__), "+m" (var)		\
+			    : "r" (pco_new__), "0" (pco_old__)		\
+			    : "memory");				\
+		break;							\
+	case 4:								\
+		asm("cmpxchgl %2, "__percpu_arg(1)			\
+			    : "=a" (pco_ret__), "+m" (var)		\
+			    : "r" (pco_new__), "0" (pco_old__)		\
+			    : "memory");				\
+		break;							\
+	case 8:								\
+		asm("cmpxchgq %2, "__percpu_arg(1)			\
+			    : "=a" (pco_ret__), "+m" (var)		\
+			    : "r" (pco_new__), "0" (pco_old__)		\
+			    : "memory");				\
+		break;							\
+	default: __bad_percpu_size();					\
+	}								\
+	pco_ret__;							\
+})
+
+/*
  * percpu_read() makes gcc load the percpu variable every time it is
  * accessed while percpu_read_stable() allows the value to be cached.
  * percpu_read_stable() is more efficient and can be used if its value
@@ -267,6 +386,12 @@ do {									\
 #define __this_cpu_xor_1(pcp, val)	percpu_to_op("xor", (pcp), val)
 #define __this_cpu_xor_2(pcp, val)	percpu_to_op("xor", (pcp), val)
 #define __this_cpu_xor_4(pcp, val)	percpu_to_op("xor", (pcp), val)
+/*
+ * Generic fallback operations for __this_cpu_xchg_[1-4] are okay and much
+ * faster than an xchg with forced lock semantics.
+ */
+#define __this_cpu_xchg_8(pcp, nval)	percpu_xchg_op(pcp, nval)
+#define __this_cpu_cmpxchg_8(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
 
 #define this_cpu_read_1(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
 #define this_cpu_read_2(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
@@ -286,6 +411,11 @@ do {									\
 #define this_cpu_xor_1(pcp, val)	percpu_to_op("xor", (pcp), val)
 #define this_cpu_xor_2(pcp, val)	percpu_to_op("xor", (pcp), val)
 #define this_cpu_xor_4(pcp, val)	percpu_to_op("xor", (pcp), val)
+#define this_cpu_xchg_1(pcp, nval)	percpu_xchg_op(pcp, nval)
+#define this_cpu_xchg_2(pcp, nval)	percpu_xchg_op(pcp, nval)
+#define this_cpu_xchg_4(pcp, nval)	percpu_xchg_op(pcp, nval)
+#define this_cpu_xchg_8(pcp, nval)	percpu_xchg_op(pcp, nval)
+#define this_cpu_cmpxchg_8(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
 
 #define irqsafe_cpu_add_1(pcp, val)	percpu_add_op((pcp), val)
 #define irqsafe_cpu_add_2(pcp, val)	percpu_add_op((pcp), val)
@@ -299,6 +429,31 @@ do {									\
 #define irqsafe_cpu_xor_1(pcp, val)	percpu_to_op("xor", (pcp), val)
 #define irqsafe_cpu_xor_2(pcp, val)	percpu_to_op("xor", (pcp), val)
 #define irqsafe_cpu_xor_4(pcp, val)	percpu_to_op("xor", (pcp), val)
+#define irqsafe_cpu_xchg_1(pcp, nval)	percpu_xchg_op(pcp, nval)
+#define irqsafe_cpu_xchg_2(pcp, nval)	percpu_xchg_op(pcp, nval)
+#define irqsafe_cpu_xchg_4(pcp, nval)	percpu_xchg_op(pcp, nval)
+#define irqsafe_cpu_xchg_8(pcp, nval)	percpu_xchg_op(pcp, nval)
+#define irqsafe_cpu_cmpxchg_8(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+
+#ifndef CONFIG_M386
+#define __this_cpu_add_return_1(pcp, val) percpu_add_return_op(pcp, val)
+#define __this_cpu_add_return_2(pcp, val) percpu_add_return_op(pcp, val)
+#define __this_cpu_add_return_4(pcp, val) percpu_add_return_op(pcp, val)
+#define __this_cpu_cmpxchg_1(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+#define __this_cpu_cmpxchg_2(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+#define __this_cpu_cmpxchg_4(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+
+#define this_cpu_add_return_1(pcp, val)	percpu_add_return_op(pcp, val)
+#define this_cpu_add_return_2(pcp, val)	percpu_add_return_op(pcp, val)
+#define this_cpu_add_return_4(pcp, val)	percpu_add_return_op(pcp, val)
+#define this_cpu_cmpxchg_1(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+#define this_cpu_cmpxchg_2(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+#define this_cpu_cmpxchg_4(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+
+#define irqsafe_cpu_cmpxchg_1(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+#define irqsafe_cpu_cmpxchg_2(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+#define irqsafe_cpu_cmpxchg_4(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+#endif /* !CONFIG_M386 */
 
 /*
  * Per cpu atomic 64 bit operations are only available under 64 bit.
@@ -311,6 +466,7 @@ do {									\
 #define __this_cpu_and_8(pcp, val)	percpu_to_op("and", (pcp), val)
 #define __this_cpu_or_8(pcp, val)	percpu_to_op("or", (pcp), val)
 #define __this_cpu_xor_8(pcp, val)	percpu_to_op("xor", (pcp), val)
+#define __this_cpu_add_return_8(pcp, val) percpu_add_return_op(pcp, val)
 
 #define this_cpu_read_8(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
 #define this_cpu_write_8(pcp, val)	percpu_to_op("mov", (pcp), val)
@@ -318,12 +474,12 @@ do {									\
 #define this_cpu_and_8(pcp, val)	percpu_to_op("and", (pcp), val)
 #define this_cpu_or_8(pcp, val)		percpu_to_op("or", (pcp), val)
 #define this_cpu_xor_8(pcp, val)	percpu_to_op("xor", (pcp), val)
+#define this_cpu_add_return_8(pcp, val)	percpu_add_return_op(pcp, val)
 
 #define irqsafe_cpu_add_8(pcp, val)	percpu_add_op((pcp), val)
 #define irqsafe_cpu_and_8(pcp, val)	percpu_to_op("and", (pcp), val)
 #define irqsafe_cpu_or_8(pcp, val)	percpu_to_op("or", (pcp), val)
 #define irqsafe_cpu_xor_8(pcp, val)	percpu_to_op("xor", (pcp), val)
-
 #endif
 
 /* This is not atomic against other CPUs -- CPU preemption needs to be off */
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 550e26b1dbb..d9d4dae305f 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -125,7 +125,6 @@ union cpuid10_edx {
 #define IBS_OP_MAX_CNT_EXT	0x007FFFFFULL	/* not a register bit mask */
 
 #ifdef CONFIG_PERF_EVENTS
-extern void init_hw_perf_events(void);
 extern void perf_events_lapic_init(void);
 
 #define PERF_EVENT_INDEX_OFFSET			0
@@ -156,7 +155,6 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs);
 }
 
 #else
-static inline void init_hw_perf_events(void)		{ }
 static inline void perf_events_lapic_init(void)	{ }
 #endif
 
diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h
index a70cd216be5..295e2ff18a6 100644
--- a/arch/x86/include/asm/perf_event_p4.h
+++ b/arch/x86/include/asm/perf_event_p4.h
@@ -744,14 +744,6 @@ enum P4_ESCR_EMASKS {
 };
 
 /*
- * P4 PEBS specifics (Replay Event only)
- *
- * Format (bits):
- *   0-6: metric from P4_PEBS_METRIC enum
- *    7 : reserved
- *    8 : reserved
- * 9-11 : reserved
- *
  * Note we have UOP and PEBS bits reserved for now
  * just in case if we will need them once
  */
@@ -788,5 +780,60 @@ enum P4_PEBS_METRIC {
 	P4_PEBS_METRIC__max
 };
 
+/*
+ * Notes on internal configuration of ESCR+CCCR tuples
+ *
+ * Since P4 has quite the different architecture of
+ * performance registers in compare with "architectural"
+ * once and we have on 64 bits to keep configuration
+ * of performance event, the following trick is used.
+ *
+ * 1) Since both ESCR and CCCR registers have only low
+ *    32 bits valuable, we pack them into a single 64 bit
+ *    configuration. Low 32 bits of such config correspond
+ *    to low 32 bits of CCCR register and high 32 bits
+ *    correspond to low 32 bits of ESCR register.
+ *
+ * 2) The meaning of every bit of such config field can
+ *    be found in Intel SDM but it should be noted that
+ *    we "borrow" some reserved bits for own usage and
+ *    clean them or set to a proper value when we do
+ *    a real write to hardware registers.
+ *
+ * 3) The format of bits of config is the following
+ *    and should be either 0 or set to some predefined
+ *    values:
+ *
+ *    Low 32 bits
+ *    -----------
+ *      0-6: P4_PEBS_METRIC enum
+ *     7-11:                    reserved
+ *       12:                    reserved (Enable)
+ *    13-15:                    reserved (ESCR select)
+ *    16-17: Active Thread
+ *       18: Compare
+ *       19: Complement
+ *    20-23: Threshold
+ *       24: Edge
+ *       25:                    reserved (FORCE_OVF)
+ *       26:                    reserved (OVF_PMI_T0)
+ *       27:                    reserved (OVF_PMI_T1)
+ *    28-29:                    reserved
+ *       30:                    reserved (Cascade)
+ *       31:                    reserved (OVF)
+ *
+ *    High 32 bits
+ *    ------------
+ *        0:                    reserved (T1_USR)
+ *        1:                    reserved (T1_OS)
+ *        2:                    reserved (T0_USR)
+ *        3:                    reserved (T0_OS)
+ *        4: Tag Enable
+ *      5-8: Tag Value
+ *     9-24: Event Mask (may use P4_ESCR_EMASK_BIT helper)
+ *    25-30: enum P4_EVENTS
+ *       31:                    reserved (HT thread)
+ */
+
 #endif /* PERF_EVENT_P4_H */
 
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index cae9c3cb95c..c6efecf85a6 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -141,10 +141,9 @@ extern __u32			cpu_caps_set[NCAPINTS];
 #ifdef CONFIG_SMP
 DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
 #define cpu_data(cpu)		per_cpu(cpu_info, cpu)
-#define current_cpu_data	__get_cpu_var(cpu_info)
 #else
+#define cpu_info		boot_cpu_data
 #define cpu_data(cpu)		boot_cpu_data
-#define current_cpu_data	boot_cpu_data
 #endif
 
 extern const struct seq_operations cpuinfo_op;
diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h
index 7f7e577a0e3..31d84acc151 100644
--- a/arch/x86/include/asm/pvclock.h
+++ b/arch/x86/include/asm/pvclock.h
@@ -11,6 +11,7 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src);
 void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
 			    struct pvclock_vcpu_time_info *vcpu,
 			    struct timespec *ts);
+void pvclock_resume(void);
 
 /*
  * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index d6763b139a8..db8aa19a08a 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -53,6 +53,12 @@ extern void x86_mrst_early_setup(void);
 static inline void x86_mrst_early_setup(void) { }
 #endif
 
+#ifdef CONFIG_X86_INTEL_CE
+extern void x86_ce4100_early_setup(void);
+#else
+static inline void x86_ce4100_early_setup(void) { }
+#endif
+
 #ifndef _SETUP
 
 /*
diff --git a/arch/x86/include/asm/smpboot_hooks.h b/arch/x86/include/asm/smpboot_hooks.h
index 1def6011490..6c22bf353f2 100644
--- a/arch/x86/include/asm/smpboot_hooks.h
+++ b/arch/x86/include/asm/smpboot_hooks.h
@@ -48,7 +48,6 @@ static inline void __init smpboot_setup_io_apic(void)
 		setup_IO_APIC();
 	else {
 		nr_ioapics = 0;
-		localise_nmi_watchdog();
 	}
 #endif
 }
diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h
index 2b16a2ad23d..52b5c7ed360 100644
--- a/arch/x86/include/asm/stacktrace.h
+++ b/arch/x86/include/asm/stacktrace.h
@@ -7,6 +7,7 @@
 #define _ASM_X86_STACKTRACE_H
 
 #include <linux/uaccess.h>
+#include <linux/ptrace.h>
 
 extern int kstack_depth_to_print;
 
@@ -46,7 +47,7 @@ struct stacktrace_ops {
 };
 
 void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp,
+		unsigned long *stack,
 		const struct stacktrace_ops *ops, void *data);
 
 #ifdef CONFIG_X86_32
@@ -57,13 +58,39 @@ void dump_trace(struct task_struct *tsk, struct pt_regs *regs,
 #define get_bp(bp) asm("movq %%rbp, %0" : "=r" (bp) :)
 #endif
 
+#ifdef CONFIG_FRAME_POINTER
+static inline unsigned long
+stack_frame(struct task_struct *task, struct pt_regs *regs)
+{
+	unsigned long bp;
+
+	if (regs)
+		return regs->bp;
+
+	if (task == current) {
+		/* Grab bp right from our regs */
+		get_bp(bp);
+		return bp;
+	}
+
+	/* bp is the last reg pushed by switch_to */
+	return *(unsigned long *)task->thread.sp;
+}
+#else
+static inline unsigned long
+stack_frame(struct task_struct *task, struct pt_regs *regs)
+{
+	return 0;
+}
+#endif
+
 extern void
 show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp, char *log_lvl);
+		   unsigned long *stack, char *log_lvl);
 
 extern void
 show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, unsigned long bp, char *log_lvl);
+		   unsigned long *sp, char *log_lvl);
 
 extern unsigned int code_bytes;
 
diff --git a/arch/x86/include/asm/timer.h b/arch/x86/include/asm/timer.h
index 5469630b27f..fa7b9176b76 100644
--- a/arch/x86/include/asm/timer.h
+++ b/arch/x86/include/asm/timer.h
@@ -10,12 +10,6 @@
 unsigned long long native_sched_clock(void);
 extern int recalibrate_cpu_khz(void);
 
-#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
-extern int timer_ack;
-#else
-# define timer_ack (0)
-#endif
-
 extern int no_timer_check;
 
 /* Accelerators for sched_clock()
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index 42d412fd8b0..ce1d54c8a43 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -26,20 +26,22 @@
  * BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512,
  * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
  *
- * We will use 31 sets, one for sending BAU messages from each of the 32
+ * We will use one set for sending BAU messages from each of the
  * cpu's on the uvhub.
  *
  * TLB shootdown will use the first of the 8 descriptors of each set.
  * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
  */
 
+#define MAX_CPUS_PER_UVHUB		64
+#define MAX_CPUS_PER_SOCKET		32
+#define UV_ADP_SIZE			64 /* hardware-provided max. */
+#define UV_CPUS_PER_ACT_STATUS		32 /* hardware-provided max. */
 #define UV_ITEMS_PER_DESCRIPTOR		8
 /* the 'throttle' to prevent the hardware stay-busy bug */
 #define MAX_BAU_CONCURRENT		3
-#define UV_CPUS_PER_ACT_STATUS		32
 #define UV_ACT_STATUS_MASK		0x3
 #define UV_ACT_STATUS_SIZE		2
-#define UV_ADP_SIZE			32
 #define UV_DISTRIBUTION_SIZE		256
 #define UV_SW_ACK_NPENDING		8
 #define UV_NET_ENDPOINT_INTD		0x38
@@ -100,7 +102,6 @@
  * number of destination side software ack resources
  */
 #define DEST_NUM_RESOURCES		8
-#define MAX_CPUS_PER_NODE		32
 /*
  * completion statuses for sending a TLB flush message
  */
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index e969f691cbf..a501741c233 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -199,6 +199,8 @@ union uvh_apicid {
 #define UVH_APICID		0x002D0E00L
 #define UV_APIC_PNODE_SHIFT	6
 
+#define UV_APICID_HIBIT_MASK	0xffff0000
+
 /* Local Bus from cpu's perspective */
 #define LOCAL_BUS_BASE		0x1c00000
 #define LOCAL_BUS_SIZE		(4 * 1024 * 1024)
@@ -491,8 +493,10 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value)
 	}
 }
 
+extern unsigned int uv_apicid_hibits;
 static unsigned long uv_hub_ipi_value(int apicid, int vector, int mode)
 {
+	apicid |= uv_apicid_hibits;
 	return (1UL << UVH_IPI_INT_SEND_SHFT) |
 			((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
 			(mode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index b2f2d2e05ce..20cafeac745 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -5,7 +5,7 @@
  *
  * SGI UV MMR definitions
  *
- * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Silicon Graphics, Inc. All rights reserved.
  */
 
 #ifndef _ASM_X86_UV_UV_MMRS_H
@@ -754,6 +754,23 @@ union uvh_lb_bau_sb_descriptor_base_u {
 };
 
 /* ========================================================================= */
+/*                   UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK                     */
+/* ========================================================================= */
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK 0x320130UL
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_32 0x009f0
+
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_SHFT 0
+#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_MASK 0x00000000ffffffffUL
+
+union uvh_lb_target_physical_apic_id_mask_u {
+	unsigned long v;
+	struct uvh_lb_target_physical_apic_id_mask_s {
+		unsigned long bit_enables : 32;  /* RW */
+		unsigned long rsvd_32_63  : 32;  /*    */
+	} s;
+};
+
+/* ========================================================================= */
 /*                               UVH_NODE_ID                                 */
 /* ========================================================================= */
 #define UVH_NODE_ID 0x0UL
@@ -806,6 +823,78 @@ union uvh_node_present_table_u {
 };
 
 /* ========================================================================= */
+/*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_0_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_overlay_config_0_mmr_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_1_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_overlay_config_1_mmr_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
+
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_MASK 0x00000000ff000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_alias210_overlay_config_2_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_overlay_config_2_mmr_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
 /*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR                  */
 /* ========================================================================= */
 #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
@@ -857,6 +946,29 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
 };
 
 /* ========================================================================= */
+/*                          UVH_RH_GAM_CONFIG_MMR                            */
+/* ========================================================================= */
+#define UVH_RH_GAM_CONFIG_MMR 0x1600000UL
+
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0
+#define UVH_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6
+#define UVH_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT 12
+#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL
+
+union uvh_rh_gam_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_config_mmr_s {
+	unsigned long	m_skt     :  6;  /* RW */
+	unsigned long	n_skt     :  4;  /* RW */
+	unsigned long	rsvd_10_11:  2;  /*    */
+	unsigned long	mmiol_cfg :  1;  /* RW */
+	unsigned long	rsvd_13_63: 51;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
 /*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
 /* ========================================================================= */
 #define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
@@ -987,97 +1099,5 @@ union uvh_rtc1_int_config_u {
     } s;
 };
 
-/* ========================================================================= */
-/*                          UVH_SI_ADDR_MAP_CONFIG                           */
-/* ========================================================================= */
-#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
-
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
-#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
-#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
-
-union uvh_si_addr_map_config_u {
-    unsigned long	v;
-    struct uvh_si_addr_map_config_s {
-	unsigned long	m_skt :  6;  /* RW */
-	unsigned long	rsvd_6_7:  2;  /*    */
-	unsigned long	n_skt :  4;  /* RW */
-	unsigned long	rsvd_12_63: 52;  /*    */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS0_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
-
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias0_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias0_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS1_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
-
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias1_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias1_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
-/* ========================================================================= */
-/*                       UVH_SI_ALIAS2_OVERLAY_CONFIG                        */
-/* ========================================================================= */
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
-
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
-#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
-
-union uvh_si_alias2_overlay_config_u {
-    unsigned long	v;
-    struct uvh_si_alias2_overlay_config_s {
-	unsigned long	rsvd_0_23: 24;  /*    */
-	unsigned long	base    :  8;  /* RW */
-	unsigned long	rsvd_32_47: 16;  /*    */
-	unsigned long	m_alias :  5;  /* RW */
-	unsigned long	rsvd_53_62: 10;  /*    */
-	unsigned long	enable  :  1;  /* RW */
-    } s;
-};
-
 
-#endif /* _ASM_X86_UV_UV_MMRS_H */
+#endif /* __ASM_UV_MMRS_X86_H__ */
diff --git a/arch/x86/include/asm/xen/interface.h b/arch/x86/include/asm/xen/interface.h
index e8506c1f0c5..1c10c88ee4e 100644
--- a/arch/x86/include/asm/xen/interface.h
+++ b/arch/x86/include/asm/xen/interface.h
@@ -61,9 +61,9 @@ DEFINE_GUEST_HANDLE(void);
 #define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
 #endif
 
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
+#define MACH2PHYS_VIRT_START  mk_unsigned_long(__MACH2PHYS_VIRT_START)
+#define MACH2PHYS_VIRT_END    mk_unsigned_long(__MACH2PHYS_VIRT_END)
+#define MACH2PHYS_NR_ENTRIES  ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>__MACH2PHYS_SHIFT)
 
 /* Maximum number of virtual CPUs in multi-processor guests. */
 #define MAX_VIRT_CPUS 32
diff --git a/arch/x86/include/asm/xen/interface_32.h b/arch/x86/include/asm/xen/interface_32.h
index 42a7e004ae5..8413688b257 100644
--- a/arch/x86/include/asm/xen/interface_32.h
+++ b/arch/x86/include/asm/xen/interface_32.h
@@ -32,6 +32,11 @@
 /* And the trap vector is... */
 #define TRAP_INSTR "int $0x82"
 
+#define __MACH2PHYS_VIRT_START 0xF5800000
+#define __MACH2PHYS_VIRT_END   0xF6800000
+
+#define __MACH2PHYS_SHIFT      2
+
 /*
  * Virtual addresses beyond this are not modifiable by guest OSes. The
  * machine->physical mapping table starts at this address, read-only.
diff --git a/arch/x86/include/asm/xen/interface_64.h b/arch/x86/include/asm/xen/interface_64.h
index 100d2662b97..839a4811cf9 100644
--- a/arch/x86/include/asm/xen/interface_64.h
+++ b/arch/x86/include/asm/xen/interface_64.h
@@ -39,18 +39,7 @@
 #define __HYPERVISOR_VIRT_END   0xFFFF880000000000
 #define __MACH2PHYS_VIRT_START  0xFFFF800000000000
 #define __MACH2PHYS_VIRT_END    0xFFFF804000000000
-
-#ifndef HYPERVISOR_VIRT_START
-#define HYPERVISOR_VIRT_START mk_unsigned_long(__HYPERVISOR_VIRT_START)
-#define HYPERVISOR_VIRT_END   mk_unsigned_long(__HYPERVISOR_VIRT_END)
-#endif
-
-#define MACH2PHYS_VIRT_START  mk_unsigned_long(__MACH2PHYS_VIRT_START)
-#define MACH2PHYS_VIRT_END    mk_unsigned_long(__MACH2PHYS_VIRT_END)
-#define MACH2PHYS_NR_ENTRIES  ((MACH2PHYS_VIRT_END-MACH2PHYS_VIRT_START)>>3)
-#ifndef machine_to_phys_mapping
-#define machine_to_phys_mapping ((unsigned long *)HYPERVISOR_VIRT_START)
-#endif
+#define __MACH2PHYS_SHIFT       3
 
 /*
  * int HYPERVISOR_set_segment_base(unsigned int which, unsigned long base)
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index dd8c1414b3d..8760cc60a21 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -5,6 +5,7 @@
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <linux/pfn.h>
+#include <linux/mm.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -35,6 +36,8 @@ typedef struct xpaddr {
 #define MAX_DOMAIN_PAGES						\
     ((unsigned long)((u64)CONFIG_XEN_MAX_DOMAIN_MEMORY * 1024 * 1024 * 1024 / PAGE_SIZE))
 
+extern unsigned long *machine_to_phys_mapping;
+extern unsigned int   machine_to_phys_order;
 
 extern unsigned long get_phys_to_machine(unsigned long pfn);
 extern bool set_phys_to_machine(unsigned long pfn, unsigned long mfn);
@@ -69,10 +72,8 @@ static inline unsigned long mfn_to_pfn(unsigned long mfn)
 	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return mfn;
 
-#if 0
 	if (unlikely((mfn >> machine_to_phys_order) != 0))
-		return max_mapnr;
-#endif
+		return ~0;
 
 	pfn = 0;
 	/*
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 9e13763b609..34244b2cd88 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -45,6 +45,7 @@ obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
 obj-y			+= alternative.o i8253.o pci-nommu.o hw_breakpoint.o
 obj-y			+= tsc.o io_delay.o rtc.o
 obj-y			+= pci-iommu_table.o
+obj-y			+= resource.o
 
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
 obj-y				+= process.o
@@ -84,7 +85,6 @@ obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_VM86)		+= vm86_32.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-obj-$(CONFIG_EARLY_PRINTK_MRST)	+= early_printk_mrst.o
 
 obj-$(CONFIG_HPET_TIMER) 	+= hpet.o
 obj-$(CONFIG_APB_TIMER)		+= apb_timer.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 71232b941b6..ec881c6bfee 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -198,6 +198,11 @@ static void __cpuinit acpi_register_lapic(int id, u8 enabled)
 {
 	unsigned int ver = 0;
 
+	if (id >= (MAX_LOCAL_APIC-1)) {
+		printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
+		return;
+	}
+
 	if (!enabled) {
 		++disabled_cpus;
 		return;
@@ -847,18 +852,6 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
  * returns 0 on success, < 0 on error
  */
 
-static void __init acpi_register_lapic_address(unsigned long address)
-{
-	mp_lapic_addr = address;
-
-	set_fixmap_nocache(FIX_APIC_BASE, address);
-	if (boot_cpu_physical_apicid == -1U) {
-		boot_cpu_physical_apicid  = read_apic_id();
-		apic_version[boot_cpu_physical_apicid] =
-			 GET_APIC_VERSION(apic_read(APIC_LVR));
-	}
-}
-
 static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
 {
 	int count;
@@ -880,7 +873,7 @@ static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
 		return count;
 	}
 
-	acpi_register_lapic_address(acpi_lapic_addr);
+	register_lapic_address(acpi_lapic_addr);
 
 	return count;
 }
@@ -907,16 +900,16 @@ static int __init acpi_parse_madt_lapic_entries(void)
 		return count;
 	}
 
-	acpi_register_lapic_address(acpi_lapic_addr);
+	register_lapic_address(acpi_lapic_addr);
 
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
-				      acpi_parse_sapic, MAX_APICS);
+				      acpi_parse_sapic, MAX_LOCAL_APIC);
 
 	if (!count) {
 		x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC,
-						acpi_parse_x2apic, MAX_APICS);
+					acpi_parse_x2apic, MAX_LOCAL_APIC);
 		count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
-					      acpi_parse_lapic, MAX_APICS);
+					acpi_parse_lapic, MAX_LOCAL_APIC);
 	}
 	if (!count && !x2count) {
 		printk(KERN_ERR PREFIX "No LAPIC entries present\n");
@@ -949,32 +942,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
 extern int es7000_plat;
 #endif
 
-static void assign_to_mp_irq(struct mpc_intsrc *m,
-				    struct mpc_intsrc *mp_irq)
-{
-	memcpy(mp_irq, m, sizeof(struct mpc_intsrc));
-}
-
-static int mp_irq_cmp(struct mpc_intsrc *mp_irq,
-				struct mpc_intsrc *m)
-{
-	return memcmp(mp_irq, m, sizeof(struct mpc_intsrc));
-}
-
-static void save_mp_irq(struct mpc_intsrc *m)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		if (!mp_irq_cmp(&mp_irqs[i], m))
-			return;
-	}
-
-	assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
-	if (++mp_irq_entries == MAX_IRQ_SOURCES)
-		panic("Max # of irq sources exceeded!!\n");
-}
-
 void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 {
 	int ioapic;
@@ -1005,7 +972,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 	mp_irq.dstapic = mp_ioapics[ioapic].apicid; /* APIC ID */
 	mp_irq.dstirq = pin;	/* INTIN# */
 
-	save_mp_irq(&mp_irq);
+	mp_save_irq(&mp_irq);
 
 	isa_irq_to_gsi[bus_irq] = gsi;
 }
@@ -1080,7 +1047,7 @@ void __init mp_config_acpi_legacy_irqs(void)
 		mp_irq.srcbusirq = i; /* Identity mapped */
 		mp_irq.dstirq = pin;
 
-		save_mp_irq(&mp_irq);
+		mp_save_irq(&mp_irq);
 	}
 }
 
@@ -1117,7 +1084,7 @@ static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
 	mp_irq.dstapic = mp_ioapics[ioapic].apicid;
 	mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
 
-	save_mp_irq(&mp_irq);
+	mp_save_irq(&mp_irq);
 #endif
 	return 0;
 }
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 5079f24c955..123608531c8 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -353,6 +353,7 @@ void __init_or_module alternatives_smp_module_del(struct module *mod)
 	mutex_unlock(&smp_alt);
 }
 
+bool skip_smp_alternatives;
 void alternatives_smp_switch(int smp)
 {
 	struct smp_alt_module *mod;
@@ -368,7 +369,7 @@ void alternatives_smp_switch(int smp)
 	printk("lockdep: fixing up alternatives.\n");
 #endif
 
-	if (noreplace_smp || smp_alt_once)
+	if (noreplace_smp || smp_alt_once || skip_smp_alternatives)
 		return;
 	BUG_ON(!smp && (num_online_cpus() > 1));
 
@@ -591,17 +592,21 @@ static atomic_t stop_machine_first;
 static int wrote_text;
 
 struct text_poke_params {
-	void *addr;
-	const void *opcode;
-	size_t len;
+	struct text_poke_param *params;
+	int nparams;
 };
 
 static int __kprobes stop_machine_text_poke(void *data)
 {
 	struct text_poke_params *tpp = data;
+	struct text_poke_param *p;
+	int i;
 
 	if (atomic_dec_and_test(&stop_machine_first)) {
-		text_poke(tpp->addr, tpp->opcode, tpp->len);
+		for (i = 0; i < tpp->nparams; i++) {
+			p = &tpp->params[i];
+			text_poke(p->addr, p->opcode, p->len);
+		}
 		smp_wmb();	/* Make sure other cpus see that this has run */
 		wrote_text = 1;
 	} else {
@@ -610,8 +615,12 @@ static int __kprobes stop_machine_text_poke(void *data)
 		smp_mb();	/* Load wrote_text before following execution */
 	}
 
-	flush_icache_range((unsigned long)tpp->addr,
-			   (unsigned long)tpp->addr + tpp->len);
+	for (i = 0; i < tpp->nparams; i++) {
+		p = &tpp->params[i];
+		flush_icache_range((unsigned long)p->addr,
+				   (unsigned long)p->addr + p->len);
+	}
+
 	return 0;
 }
 
@@ -631,10 +640,13 @@ static int __kprobes stop_machine_text_poke(void *data)
 void *__kprobes text_poke_smp(void *addr, const void *opcode, size_t len)
 {
 	struct text_poke_params tpp;
+	struct text_poke_param p;
 
-	tpp.addr = addr;
-	tpp.opcode = opcode;
-	tpp.len = len;
+	p.addr = addr;
+	p.opcode = opcode;
+	p.len = len;
+	tpp.params = &p;
+	tpp.nparams = 1;
 	atomic_set(&stop_machine_first, 1);
 	wrote_text = 0;
 	/* Use __stop_machine() because the caller already got online_cpus. */
@@ -642,6 +654,26 @@ void *__kprobes text_poke_smp(void *addr, const void *opcode, size_t len)
 	return addr;
 }
 
+/**
+ * text_poke_smp_batch - Update instructions on a live kernel on SMP
+ * @params: an array of text_poke parameters
+ * @n: the number of elements in params.
+ *
+ * Modify multi-byte instruction by using stop_machine() on SMP. Since the
+ * stop_machine() is heavy task, it is better to aggregate text_poke requests
+ * and do it once if possible.
+ *
+ * Note: Must be called under get_online_cpus() and text_mutex.
+ */
+void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n)
+{
+	struct text_poke_params tpp = {.params = params, .nparams = n};
+
+	atomic_set(&stop_machine_first, 1);
+	wrote_text = 0;
+	stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
+}
+
 #if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c
index 8f6463d8ed0..affacb5e006 100644
--- a/arch/x86/kernel/amd_nb.c
+++ b/arch/x86/kernel/amd_nb.c
@@ -12,95 +12,116 @@
 
 static u32 *flush_words;
 
-struct pci_device_id k8_nb_ids[] = {
+struct pci_device_id amd_nb_misc_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_MISC) },
 	{}
 };
-EXPORT_SYMBOL(k8_nb_ids);
+EXPORT_SYMBOL(amd_nb_misc_ids);
 
-struct k8_northbridge_info k8_northbridges;
-EXPORT_SYMBOL(k8_northbridges);
+struct amd_northbridge_info amd_northbridges;
+EXPORT_SYMBOL(amd_northbridges);
 
-static struct pci_dev *next_k8_northbridge(struct pci_dev *dev)
+static struct pci_dev *next_northbridge(struct pci_dev *dev,
+					struct pci_device_id *ids)
 {
 	do {
 		dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
 		if (!dev)
 			break;
-	} while (!pci_match_id(&k8_nb_ids[0], dev));
+	} while (!pci_match_id(ids, dev));
 	return dev;
 }
 
-int cache_k8_northbridges(void)
+int amd_cache_northbridges(void)
 {
-	int i;
-	struct pci_dev *dev;
+	int i = 0;
+	struct amd_northbridge *nb;
+	struct pci_dev *misc;
 
-	if (k8_northbridges.num)
+	if (amd_nb_num())
 		return 0;
 
-	dev = NULL;
-	while ((dev = next_k8_northbridge(dev)) != NULL)
-		k8_northbridges.num++;
+	misc = NULL;
+	while ((misc = next_northbridge(misc, amd_nb_misc_ids)) != NULL)
+		i++;
 
-	/* some CPU families (e.g. family 0x11) do not support GART */
-	if (boot_cpu_data.x86 == 0xf || boot_cpu_data.x86 == 0x10 ||
-	    boot_cpu_data.x86 == 0x15)
-		k8_northbridges.gart_supported = 1;
+	if (i == 0)
+		return 0;
 
-	k8_northbridges.nb_misc = kmalloc((k8_northbridges.num + 1) *
-					  sizeof(void *), GFP_KERNEL);
-	if (!k8_northbridges.nb_misc)
+	nb = kzalloc(i * sizeof(struct amd_northbridge), GFP_KERNEL);
+	if (!nb)
 		return -ENOMEM;
 
-	if (!k8_northbridges.num) {
-		k8_northbridges.nb_misc[0] = NULL;
-		return 0;
-	}
+	amd_northbridges.nb = nb;
+	amd_northbridges.num = i;
 
-	if (k8_northbridges.gart_supported) {
-		flush_words = kmalloc(k8_northbridges.num * sizeof(u32),
-				      GFP_KERNEL);
-		if (!flush_words) {
-			kfree(k8_northbridges.nb_misc);
-			return -ENOMEM;
-		}
-	}
+	misc = NULL;
+	for (i = 0; i != amd_nb_num(); i++) {
+		node_to_amd_nb(i)->misc = misc =
+			next_northbridge(misc, amd_nb_misc_ids);
+        }
+
+	/* some CPU families (e.g. family 0x11) do not support GART */
+	if (boot_cpu_data.x86 == 0xf || boot_cpu_data.x86 == 0x10 ||
+	    boot_cpu_data.x86 == 0x15)
+		amd_northbridges.flags |= AMD_NB_GART;
+
+	/*
+	 * Some CPU families support L3 Cache Index Disable. There are some
+	 * limitations because of E382 and E388 on family 0x10.
+	 */
+	if (boot_cpu_data.x86 == 0x10 &&
+	    boot_cpu_data.x86_model >= 0x8 &&
+	    (boot_cpu_data.x86_model > 0x9 ||
+	     boot_cpu_data.x86_mask >= 0x1))
+		amd_northbridges.flags |= AMD_NB_L3_INDEX_DISABLE;
 
-	dev = NULL;
-	i = 0;
-	while ((dev = next_k8_northbridge(dev)) != NULL) {
-		k8_northbridges.nb_misc[i] = dev;
-		if (k8_northbridges.gart_supported)
-			pci_read_config_dword(dev, 0x9c, &flush_words[i++]);
-	}
-	k8_northbridges.nb_misc[i] = NULL;
 	return 0;
 }
-EXPORT_SYMBOL_GPL(cache_k8_northbridges);
+EXPORT_SYMBOL_GPL(amd_cache_northbridges);
 
 /* Ignores subdevice/subvendor but as far as I can figure out
    they're useless anyways */
-int __init early_is_k8_nb(u32 device)
+int __init early_is_amd_nb(u32 device)
 {
 	struct pci_device_id *id;
 	u32 vendor = device & 0xffff;
 	device >>= 16;
-	for (id = k8_nb_ids; id->vendor; id++)
+	for (id = amd_nb_misc_ids; id->vendor; id++)
 		if (vendor == id->vendor && device == id->device)
 			return 1;
 	return 0;
 }
 
-void k8_flush_garts(void)
+int amd_cache_gart(void)
+{
+       int i;
+
+       if (!amd_nb_has_feature(AMD_NB_GART))
+               return 0;
+
+       flush_words = kmalloc(amd_nb_num() * sizeof(u32), GFP_KERNEL);
+       if (!flush_words) {
+               amd_northbridges.flags &= ~AMD_NB_GART;
+               return -ENOMEM;
+       }
+
+       for (i = 0; i != amd_nb_num(); i++)
+               pci_read_config_dword(node_to_amd_nb(i)->misc, 0x9c,
+                                     &flush_words[i]);
+
+       return 0;
+}
+
+void amd_flush_garts(void)
 {
 	int flushed, i;
 	unsigned long flags;
 	static DEFINE_SPINLOCK(gart_lock);
 
-	if (!k8_northbridges.gart_supported)
+	if (!amd_nb_has_feature(AMD_NB_GART))
 		return;
 
 	/* Avoid races between AGP and IOMMU. In theory it's not needed
@@ -109,16 +130,16 @@ void k8_flush_garts(void)
 	   that it doesn't matter to serialize more. -AK */
 	spin_lock_irqsave(&gart_lock, flags);
 	flushed = 0;
-	for (i = 0; i < k8_northbridges.num; i++) {
-		pci_write_config_dword(k8_northbridges.nb_misc[i], 0x9c,
-				       flush_words[i]|1);
+	for (i = 0; i < amd_nb_num(); i++) {
+		pci_write_config_dword(node_to_amd_nb(i)->misc, 0x9c,
+				       flush_words[i] | 1);
 		flushed++;
 	}
-	for (i = 0; i < k8_northbridges.num; i++) {
+	for (i = 0; i < amd_nb_num(); i++) {
 		u32 w;
 		/* Make sure the hardware actually executed the flush*/
 		for (;;) {
-			pci_read_config_dword(k8_northbridges.nb_misc[i],
+			pci_read_config_dword(node_to_amd_nb(i)->misc,
 					      0x9c, &w);
 			if (!(w & 1))
 				break;
@@ -129,19 +150,23 @@ void k8_flush_garts(void)
 	if (!flushed)
 		printk("nothing to flush?\n");
 }
-EXPORT_SYMBOL_GPL(k8_flush_garts);
+EXPORT_SYMBOL_GPL(amd_flush_garts);
 
-static __init int init_k8_nbs(void)
+static __init int init_amd_nbs(void)
 {
 	int err = 0;
 
-	err = cache_k8_northbridges();
+	err = amd_cache_northbridges();
 
 	if (err < 0)
-		printk(KERN_NOTICE "K8 NB: Cannot enumerate AMD northbridges.\n");
+		printk(KERN_NOTICE "AMD NB: Cannot enumerate AMD northbridges.\n");
+
+	if (amd_cache_gart() < 0)
+		printk(KERN_NOTICE "AMD NB: Cannot initialize GART flush words, "
+		       "GART support disabled.\n");
 
 	return err;
 }
 
 /* This has to go after the PCI subsystem */
-fs_initcall(init_k8_nbs);
+fs_initcall(init_amd_nbs);
diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c
index 92543c73cf8..7c9ab59653e 100644
--- a/arch/x86/kernel/apb_timer.c
+++ b/arch/x86/kernel/apb_timer.c
@@ -315,6 +315,7 @@ static void apbt_setup_irq(struct apbt_dev *adev)
 
 	if (system_state == SYSTEM_BOOTING) {
 		irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
+		irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
 		/* APB timer irqs are set up as mp_irqs, timer is edge type */
 		__set_irq_handler(adev->irq, handle_edge_irq, 0, "edge");
 		if (request_irq(adev->irq, apbt_interrupt_handler,
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index b3a16e8f070..dcd7c83e165 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -206,7 +206,7 @@ static u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
  * Do an PCI bus scan by hand because we're running before the PCI
  * subsystem.
  *
- * All K8 AGP bridges are AGPv3 compliant, so we can do this scan
+ * All AMD AGP bridges are AGPv3 compliant, so we can do this scan
  * generically. It's probably overkill to always scan all slots because
  * the AGP bridges should be always an own bus on the HT hierarchy,
  * but do it here for future safety.
@@ -303,7 +303,7 @@ void __init early_gart_iommu_check(void)
 		dev_limit = bus_dev_ranges[i].dev_limit;
 
 		for (slot = dev_base; slot < dev_limit; slot++) {
-			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+			if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00)))
 				continue;
 
 			ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
@@ -358,7 +358,7 @@ void __init early_gart_iommu_check(void)
 		dev_limit = bus_dev_ranges[i].dev_limit;
 
 		for (slot = dev_base; slot < dev_limit; slot++) {
-			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+			if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00)))
 				continue;
 
 			ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
@@ -400,7 +400,7 @@ int __init gart_iommu_hole_init(void)
 		dev_limit = bus_dev_ranges[i].dev_limit;
 
 		for (slot = dev_base; slot < dev_limit; slot++) {
-			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+			if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00)))
 				continue;
 
 			iommu_detected = 1;
@@ -518,7 +518,7 @@ out:
 		dev_base = bus_dev_ranges[i].dev_base;
 		dev_limit = bus_dev_ranges[i].dev_limit;
 		for (slot = dev_base; slot < dev_limit; slot++) {
-			if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+			if (!early_is_amd_nb(read_pci_config(bus, slot, 3, 0x00)))
 				continue;
 
 			write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 910f20b457c..3966b564ea4 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -3,10 +3,7 @@
 #
 
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o
-ifneq ($(CONFIG_HARDLOCKUP_DETECTOR),y)
-obj-$(CONFIG_X86_LOCAL_APIC)	+= nmi.o
-endif
-obj-$(CONFIG_HARDLOCKUP_DETECTOR)	+= hw_nmi.o
+obj-y				+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 850657d1b0e..79e6baa8aa0 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -31,7 +31,6 @@
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/dmi.h>
-#include <linux/nmi.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
 
@@ -52,7 +51,6 @@
 #include <asm/mce.h>
 #include <asm/kvm_para.h>
 #include <asm/tsc.h>
-#include <asm/atomic.h>
 
 unsigned int num_processors;
 
@@ -433,17 +431,18 @@ int setup_APIC_eilvt(u8 offset, u8 vector, u8 msg_type, u8 mask)
 	reserved = reserve_eilvt_offset(offset, new);
 
 	if (reserved != new) {
-		pr_err(FW_BUG "cpu %d, try to setup vector 0x%x, but "
-		       "vector 0x%x was already reserved by another core, "
-		       "APIC%lX=0x%x\n",
-		       smp_processor_id(), new, reserved, reg, old);
+		pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for "
+		       "vector 0x%x, but the register is already in use for "
+		       "vector 0x%x on another cpu\n",
+		       smp_processor_id(), reg, offset, new, reserved);
 		return -EINVAL;
 	}
 
 	if (!eilvt_entry_is_changeable(old, new)) {
-		pr_err(FW_BUG "cpu %d, try to setup vector 0x%x but "
-		       "register already in use, APIC%lX=0x%x\n",
-		       smp_processor_id(), new, reg, old);
+		pr_err(FW_BUG "cpu %d, try to use APIC%lX (LVT offset %d) for "
+		       "vector 0x%x, but the register is already in use for "
+		       "vector 0x%x on this cpu\n",
+		       smp_processor_id(), reg, offset, new, old);
 		return -EBUSY;
 	}
 
@@ -517,7 +516,7 @@ static void __cpuinit setup_APIC_timer(void)
 {
 	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
 
-	if (cpu_has(&current_cpu_data, X86_FEATURE_ARAT)) {
+	if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_ARAT)) {
 		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP;
 		/* Make LAPIC timer preferrable over percpu HPET */
 		lapic_clockevent.rating = 150;
@@ -800,11 +799,7 @@ void __init setup_boot_APIC_clock(void)
 	 * PIT/HPET going.  Otherwise register lapic as a dummy
 	 * device.
 	 */
-	if (nmi_watchdog != NMI_IO_APIC)
-		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-	else
-		pr_warning("APIC timer registered as dummy,"
-			" due to nmi_watchdog=%d!\n", nmi_watchdog);
+	lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
 
 	/* Setup the lapic or request the broadcast */
 	setup_APIC_timer();
@@ -1196,12 +1191,15 @@ static void __cpuinit lapic_setup_esr(void)
 			oldvalue, value);
 }
 
-
 /**
  * setup_local_APIC - setup the local APIC
+ *
+ * Used to setup local APIC while initializing BSP or bringin up APs.
+ * Always called with preemption disabled.
  */
 void __cpuinit setup_local_APIC(void)
 {
+	int cpu = smp_processor_id();
 	unsigned int value, queued;
 	int i, j, acked = 0;
 	unsigned long long tsc = 0, ntsc;
@@ -1226,8 +1224,6 @@ void __cpuinit setup_local_APIC(void)
 #endif
 	perf_events_lapic_init();
 
-	preempt_disable();
-
 	/*
 	 * Double-check whether this APIC is really registered.
 	 * This is meaningless in clustered apic mode, so we skip it.
@@ -1343,21 +1339,19 @@ void __cpuinit setup_local_APIC(void)
 	 * TODO: set up through-local-APIC from through-I/O-APIC? --macro
 	 */
 	value = apic_read(APIC_LVT0) & APIC_LVT_MASKED;
-	if (!smp_processor_id() && (pic_mode || !value)) {
+	if (!cpu && (pic_mode || !value)) {
 		value = APIC_DM_EXTINT;
-		apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n",
-				smp_processor_id());
+		apic_printk(APIC_VERBOSE, "enabled ExtINT on CPU#%d\n", cpu);
 	} else {
 		value = APIC_DM_EXTINT | APIC_LVT_MASKED;
-		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
-				smp_processor_id());
+		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n", cpu);
 	}
 	apic_write(APIC_LVT0, value);
 
 	/*
 	 * only the BP should see the LINT1 NMI signal, obviously.
 	 */
-	if (!smp_processor_id())
+	if (!cpu)
 		value = APIC_DM_NMI;
 	else
 		value = APIC_DM_NMI | APIC_LVT_MASKED;
@@ -1365,11 +1359,9 @@ void __cpuinit setup_local_APIC(void)
 		value |= APIC_LVT_LEVEL_TRIGGER;
 	apic_write(APIC_LVT1, value);
 
-	preempt_enable();
-
 #ifdef CONFIG_X86_MCE_INTEL
 	/* Recheck CMCI information after local APIC is up on CPU #0 */
-	if (smp_processor_id() == 0)
+	if (!cpu)
 		cmci_recheck();
 #endif
 }
@@ -1388,8 +1380,15 @@ void __cpuinit end_local_APIC_setup(void)
 	}
 #endif
 
-	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
+
+	/*
+	 * Now that local APIC setup is completed for BP, configure the fault
+	 * handling for interrupt remapping.
+	 */
+	if (!smp_processor_id() && intr_remapping_enabled)
+		enable_drhd_fault_handling();
+
 }
 
 #ifdef CONFIG_X86_X2APIC
@@ -1531,13 +1530,60 @@ static int __init detect_init_APIC(void)
 	return 0;
 }
 #else
+
+static int apic_verify(void)
+{
+	u32 features, h, l;
+
+	/*
+	 * The APIC feature bit should now be enabled
+	 * in `cpuid'
+	 */
+	features = cpuid_edx(1);
+	if (!(features & (1 << X86_FEATURE_APIC))) {
+		pr_warning("Could not enable APIC!\n");
+		return -1;
+	}
+	set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+	/* The BIOS may have set up the APIC at some other address */
+	rdmsr(MSR_IA32_APICBASE, l, h);
+	if (l & MSR_IA32_APICBASE_ENABLE)
+		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
+
+	pr_info("Found and enabled local APIC!\n");
+	return 0;
+}
+
+int apic_force_enable(void)
+{
+	u32 h, l;
+
+	if (disable_apic)
+		return -1;
+
+	/*
+	 * Some BIOSes disable the local APIC in the APIC_BASE
+	 * MSR. This can only be done in software for Intel P6 or later
+	 * and AMD K7 (Model > 1) or later.
+	 */
+	rdmsr(MSR_IA32_APICBASE, l, h);
+	if (!(l & MSR_IA32_APICBASE_ENABLE)) {
+		pr_info("Local APIC disabled by BIOS -- reenabling.\n");
+		l &= ~MSR_IA32_APICBASE_BASE;
+		l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
+		wrmsr(MSR_IA32_APICBASE, l, h);
+		enabled_via_apicbase = 1;
+	}
+	return apic_verify();
+}
+
 /*
  * Detect and initialize APIC
  */
 static int __init detect_init_APIC(void)
 {
-	u32 h, l, features;
-
 	/* Disabled by kernel option? */
 	if (disable_apic)
 		return -1;
@@ -1567,38 +1613,12 @@ static int __init detect_init_APIC(void)
 				"you can enable it with \"lapic\"\n");
 			return -1;
 		}
-		/*
-		 * Some BIOSes disable the local APIC in the APIC_BASE
-		 * MSR. This can only be done in software for Intel P6 or later
-		 * and AMD K7 (Model > 1) or later.
-		 */
-		rdmsr(MSR_IA32_APICBASE, l, h);
-		if (!(l & MSR_IA32_APICBASE_ENABLE)) {
-			pr_info("Local APIC disabled by BIOS -- reenabling.\n");
-			l &= ~MSR_IA32_APICBASE_BASE;
-			l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
-			wrmsr(MSR_IA32_APICBASE, l, h);
-			enabled_via_apicbase = 1;
-		}
-	}
-	/*
-	 * The APIC feature bit should now be enabled
-	 * in `cpuid'
-	 */
-	features = cpuid_edx(1);
-	if (!(features & (1 << X86_FEATURE_APIC))) {
-		pr_warning("Could not enable APIC!\n");
-		return -1;
+		if (apic_force_enable())
+			return -1;
+	} else {
+		if (apic_verify())
+			return -1;
 	}
-	set_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
-	/* The BIOS may have set up the APIC at some other address */
-	rdmsr(MSR_IA32_APICBASE, l, h);
-	if (l & MSR_IA32_APICBASE_ENABLE)
-		mp_lapic_addr = l & MSR_IA32_APICBASE_BASE;
-
-	pr_info("Found and enabled local APIC!\n");
 
 	apic_pm_activate();
 
@@ -1610,28 +1630,6 @@ no_apic:
 }
 #endif
 
-#ifdef CONFIG_X86_64
-void __init early_init_lapic_mapping(void)
-{
-	/*
-	 * If no local APIC can be found then go out
-	 * : it means there is no mpatable and MADT
-	 */
-	if (!smp_found_config)
-		return;
-
-	set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
-	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-		    APIC_BASE, mp_lapic_addr);
-
-	/*
-	 * Fetch the APIC ID of the BSP in case we have a
-	 * default configuration (or the MP table is broken).
-	 */
-	boot_cpu_physical_apicid = read_apic_id();
-}
-#endif
-
 /**
  * init_apic_mappings - initialize APIC mappings
  */
@@ -1657,10 +1655,7 @@ void __init init_apic_mappings(void)
 		 * acpi_register_lapic_address()
 		 */
 		if (!acpi_lapic && !smp_found_config)
-			set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
-
-		apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
-					APIC_BASE, apic_phys);
+			register_lapic_address(apic_phys);
 	}
 
 	/*
@@ -1682,11 +1677,27 @@ void __init init_apic_mappings(void)
 	}
 }
 
+void __init register_lapic_address(unsigned long address)
+{
+	mp_lapic_addr = address;
+
+	if (!x2apic_mode) {
+		set_fixmap_nocache(FIX_APIC_BASE, address);
+		apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
+			    APIC_BASE, mp_lapic_addr);
+	}
+	if (boot_cpu_physical_apicid == -1U) {
+		boot_cpu_physical_apicid  = read_apic_id();
+		apic_version[boot_cpu_physical_apicid] =
+			 GET_APIC_VERSION(apic_read(APIC_LVR));
+	}
+}
+
 /*
  * This initializes the IO-APIC and APIC hardware if this is
  * a UP kernel.
  */
-int apic_version[MAX_APICS];
+int apic_version[MAX_LOCAL_APIC];
 
 int __init APIC_init_uniprocessor(void)
 {
@@ -1751,17 +1762,10 @@ int __init APIC_init_uniprocessor(void)
 		setup_IO_APIC();
 	else {
 		nr_ioapics = 0;
-		localise_nmi_watchdog();
 	}
-#else
-	localise_nmi_watchdog();
 #endif
 
 	x86_init.timers.setup_percpu_clockev();
-#ifdef CONFIG_X86_64
-	check_nmi_watchdog();
-#endif
-
 	return 0;
 }
 
diff --git a/arch/x86/kernel/apic/hw_nmi.c b/arch/x86/kernel/apic/hw_nmi.c
index cefd6942f0e..72ec29e1ae0 100644
--- a/arch/x86/kernel/apic/hw_nmi.c
+++ b/arch/x86/kernel/apic/hw_nmi.c
@@ -17,19 +17,31 @@
 #include <linux/nmi.h>
 #include <linux/module.h>
 
-/* For reliability, we're prepared to waste bits here. */
-static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
-
+#ifdef CONFIG_HARDLOCKUP_DETECTOR
 u64 hw_nmi_get_sample_period(void)
 {
 	return (u64)(cpu_khz) * 1000 * 60;
 }
+#endif
+
+#ifdef arch_trigger_all_cpu_backtrace
+/* For reliability, we're prepared to waste bits here. */
+static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
+
+/* "in progress" flag of arch_trigger_all_cpu_backtrace */
+static unsigned long backtrace_flag;
 
-#ifdef ARCH_HAS_NMI_WATCHDOG
 void arch_trigger_all_cpu_backtrace(void)
 {
 	int i;
 
+	if (test_and_set_bit(0, &backtrace_flag))
+		/*
+		 * If there is already a trigger_all_cpu_backtrace() in progress
+		 * (backtrace_flag == 1), don't output double cpu dump infos.
+		 */
+		return;
+
 	cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask);
 
 	printk(KERN_INFO "sending NMI to all CPUs:\n");
@@ -41,6 +53,9 @@ void arch_trigger_all_cpu_backtrace(void)
 			break;
 		mdelay(1);
 	}
+
+	clear_bit(0, &backtrace_flag);
+	smp_mb__after_clear_bit();
 }
 
 static int __kprobes
@@ -49,7 +64,7 @@ arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self,
 {
 	struct die_args *args = __args;
 	struct pt_regs *regs;
-	int cpu = smp_processor_id();
+	int cpu;
 
 	switch (cmd) {
 	case DIE_NMI:
@@ -61,6 +76,7 @@ arch_trigger_all_cpu_backtrace_handler(struct notifier_block *self,
 	}
 
 	regs = args->regs;
+	cpu = smp_processor_id();
 
 	if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
 		static arch_spinlock_t lock = __ARCH_SPIN_LOCK_UNLOCKED;
@@ -90,18 +106,3 @@ static int __init register_trigger_all_cpu_backtrace(void)
 }
 early_initcall(register_trigger_all_cpu_backtrace);
 #endif
-
-/* STUB calls to mimic old nmi_watchdog behaviour */
-#if defined(CONFIG_X86_LOCAL_APIC)
-unsigned int nmi_watchdog = NMI_NONE;
-EXPORT_SYMBOL(nmi_watchdog);
-void acpi_nmi_enable(void) { return; }
-void acpi_nmi_disable(void) { return; }
-#endif
-atomic_t nmi_active = ATOMIC_INIT(0);           /* oprofile uses this */
-EXPORT_SYMBOL(nmi_active);
-int unknown_nmi_panic;
-void cpu_nmi_set_wd_enabled(void) { return; }
-void stop_apic_nmi_watchdog(void *unused) { return; }
-void setup_apic_nmi_watchdog(void *unused) { return; }
-int __init check_nmi_watchdog(void) { return 0; }
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 7cc0a721f62..697dc34b7b8 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -54,7 +54,6 @@
 #include <asm/dma.h>
 #include <asm/timer.h>
 #include <asm/i8259.h>
-#include <asm/nmi.h>
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
 #include <asm/setup.h>
@@ -126,6 +125,26 @@ static int __init parse_noapic(char *str)
 }
 early_param("noapic", parse_noapic);
 
+/* Will be called in mpparse/acpi/sfi codes for saving IRQ info */
+void mp_save_irq(struct mpc_intsrc *m)
+{
+	int i;
+
+	apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
+		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
+		m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus,
+		m->srcbusirq, m->dstapic, m->dstirq);
+
+	for (i = 0; i < mp_irq_entries; i++) {
+		if (!memcmp(&mp_irqs[i], m, sizeof(*m)))
+			return;
+	}
+
+	memcpy(&mp_irqs[mp_irq_entries], m, sizeof(*m));
+	if (++mp_irq_entries == MAX_IRQ_SOURCES)
+		panic("Max # of irq sources exceeded!!\n");
+}
+
 struct irq_pin_list {
 	int apic, pin;
 	struct irq_pin_list *next;
@@ -136,6 +155,7 @@ static struct irq_pin_list *alloc_irq_pin_list(int node)
 	return kzalloc_node(sizeof(struct irq_pin_list), GFP_KERNEL, node);
 }
 
+
 /* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
 #ifdef CONFIG_SPARSE_IRQ
 static struct irq_cfg irq_cfgx[NR_IRQS_LEGACY];
@@ -1934,8 +1954,7 @@ void disable_IO_APIC(void)
  *
  * by Matt Domsch <Matt_Domsch@dell.com>  Tue Dec 21 12:25:05 CST 1999
  */
-
-void __init setup_ioapic_ids_from_mpc(void)
+void __init setup_ioapic_ids_from_mpc_nocheck(void)
 {
 	union IO_APIC_reg_00 reg_00;
 	physid_mask_t phys_id_present_map;
@@ -1944,15 +1963,6 @@ void __init setup_ioapic_ids_from_mpc(void)
 	unsigned char old_id;
 	unsigned long flags;
 
-	if (acpi_ioapic)
-		return;
-	/*
-	 * Don't check I/O APIC IDs for xAPIC systems.  They have
-	 * no meaning without the serial APIC bus.
-	 */
-	if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
-		|| APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return;
 	/*
 	 * This is broken; anything with a real cpu count has to
 	 * circumvent this idiocy regardless.
@@ -2006,7 +2016,6 @@ void __init setup_ioapic_ids_from_mpc(void)
 			physids_or(phys_id_present_map, phys_id_present_map, tmp);
 		}
 
-
 		/*
 		 * We need to adjust the IRQ routing table
 		 * if the ID changed.
@@ -2018,9 +2027,12 @@ void __init setup_ioapic_ids_from_mpc(void)
 						= mp_ioapics[apic_id].apicid;
 
 		/*
-		 * Read the right value from the MPC table and
-		 * write it into the ID register.
+		 * Update the ID register according to the right value
+		 * from the MPC table if they are different.
 		 */
+		if (mp_ioapics[apic_id].apicid == reg_00.bits.ID)
+			continue;
+
 		apic_printk(APIC_VERBOSE, KERN_INFO
 			"...changing IO-APIC physical APIC ID to %d ...",
 			mp_ioapics[apic_id].apicid);
@@ -2042,6 +2054,21 @@ void __init setup_ioapic_ids_from_mpc(void)
 			apic_printk(APIC_VERBOSE, " ok.\n");
 	}
 }
+
+void __init setup_ioapic_ids_from_mpc(void)
+{
+
+	if (acpi_ioapic)
+		return;
+	/*
+	 * Don't check I/O APIC IDs for xAPIC systems.  They have
+	 * no meaning without the serial APIC bus.
+	 */
+	if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+		|| APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		return;
+	setup_ioapic_ids_from_mpc_nocheck();
+}
 #endif
 
 int no_timer_check __initdata;
@@ -2302,7 +2329,7 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void)
 		unsigned int irr;
 		struct irq_desc *desc;
 		struct irq_cfg *cfg;
-		irq = __get_cpu_var(vector_irq)[vector];
+		irq = __this_cpu_read(vector_irq[vector]);
 
 		if (irq == -1)
 			continue;
@@ -2336,7 +2363,7 @@ asmlinkage void smp_irq_move_cleanup_interrupt(void)
 			apic->send_IPI_self(IRQ_MOVE_CLEANUP_VECTOR);
 			goto unlock;
 		}
-		__get_cpu_var(vector_irq)[vector] = -1;
+		__this_cpu_write(vector_irq[vector], -1);
 unlock:
 		raw_spin_unlock(&desc->lock);
 	}
@@ -2430,13 +2457,12 @@ static void ack_apic_level(struct irq_data *data)
 {
 	struct irq_cfg *cfg = data->chip_data;
 	int i, do_unmask_irq = 0, irq = data->irq;
-	struct irq_desc *desc = irq_to_desc(irq);
 	unsigned long v;
 
 	irq_complete_move(cfg);
 #ifdef CONFIG_GENERIC_PENDING_IRQ
 	/* If we are moving the irq we need to mask it */
-	if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
+	if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
 		do_unmask_irq = 1;
 		mask_ioapic(cfg);
 	}
@@ -2643,24 +2669,6 @@ static void lapic_register_intr(int irq)
 				      "edge");
 }
 
-static void __init setup_nmi(void)
-{
-	/*
-	 * Dirty trick to enable the NMI watchdog ...
-	 * We put the 8259A master into AEOI mode and
-	 * unmask on all local APICs LVT0 as NMI.
-	 *
-	 * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire')
-	 * is from Maciej W. Rozycki - so we do not have to EOI from
-	 * the NMI handler or the timer interrupt.
-	 */
-	apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ...");
-
-	enable_NMI_through_LVT0();
-
-	apic_printk(APIC_VERBOSE, " done.\n");
-}
-
 /*
  * This looks a bit hackish but it's about the only one way of sending
  * a few INTA cycles to 8259As and any associated glue logic.  ICR does
@@ -2766,15 +2774,6 @@ static inline void __init check_timer(void)
 	 */
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	legacy_pic->init(1);
-#ifdef CONFIG_X86_32
-	{
-		unsigned int ver;
-
-		ver = apic_read(APIC_LVR);
-		ver = GET_APIC_VERSION(ver);
-		timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
-	}
-#endif
 
 	pin1  = find_isa_irq_pin(0, mp_INT);
 	apic1 = find_isa_irq_apic(0, mp_INT);
@@ -2822,10 +2821,6 @@ static inline void __init check_timer(void)
 				unmask_ioapic(cfg);
 		}
 		if (timer_irq_works()) {
-			if (nmi_watchdog == NMI_IO_APIC) {
-				setup_nmi();
-				legacy_pic->unmask(0);
-			}
 			if (disable_timer_pin_1 > 0)
 				clear_IO_APIC_pin(0, pin1);
 			goto out;
@@ -2851,11 +2846,6 @@ static inline void __init check_timer(void)
 		if (timer_irq_works()) {
 			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
 			timer_through_8259 = 1;
-			if (nmi_watchdog == NMI_IO_APIC) {
-				legacy_pic->mask(0);
-				setup_nmi();
-				legacy_pic->unmask(0);
-			}
 			goto out;
 		}
 		/*
@@ -2867,15 +2857,6 @@ static inline void __init check_timer(void)
 		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
 	}
 
-	if (nmi_watchdog == NMI_IO_APIC) {
-		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
-			    "through the IO-APIC - disabling NMI Watchdog!\n");
-		nmi_watchdog = NMI_NONE;
-	}
-#ifdef CONFIG_X86_32
-	timer_ack = 0;
-#endif
-
 	apic_printk(APIC_QUIET, KERN_INFO
 		    "...trying to set up timer as Virtual Wire IRQ...\n");
 
@@ -3413,6 +3394,7 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask,
 	msg.data |= MSI_DATA_VECTOR(cfg->vector);
 	msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
 	msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+	msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
 
 	dmar_msi_write(irq, &msg);
 
@@ -3639,7 +3621,7 @@ int __init io_apic_get_redir_entries (int ioapic)
 	return reg_01.bits.entries + 1;
 }
 
-void __init probe_nr_irqs_gsi(void)
+static void __init probe_nr_irqs_gsi(void)
 {
 	int nr;
 
@@ -3956,7 +3938,7 @@ static struct resource * __init ioapic_setup_resources(int nr_ioapics)
 	return res;
 }
 
-void __init ioapic_init_mappings(void)
+void __init ioapic_and_gsi_init(void)
 {
 	unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0;
 	struct resource *ioapic_res;
@@ -3994,6 +3976,8 @@ fake_ioapic_page:
 		ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1;
 		ioapic_res++;
 	}
+
+	probe_nr_irqs_gsi();
 }
 
 void __init ioapic_insert_resources(void)
@@ -4103,7 +4087,8 @@ void __init pre_init_apic_IRQ0(void)
 
 	printk(KERN_INFO "Early APIC setup for system timer0\n");
 #ifndef CONFIG_SMP
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	physid_set_mask_of_physid(boot_cpu_physical_apicid,
+					 &phys_cpu_present_map);
 #endif
 	/* Make sure the irq descriptor is set up */
 	cfg = alloc_irq_and_cfg_at(0, 0);
diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c
deleted file mode 100644
index c90041ccb74..00000000000
--- a/arch/x86/kernel/apic/nmi.c
+++ /dev/null
@@ -1,567 +0,0 @@
-/*
- *  NMI watchdog support on APIC systems
- *
- *  Started by Ingo Molnar <mingo@redhat.com>
- *
- *  Fixes:
- *  Mikael Pettersson	: AMD K7 support for local APIC NMI watchdog.
- *  Mikael Pettersson	: Power Management for local APIC NMI watchdog.
- *  Mikael Pettersson	: Pentium 4 support for local APIC NMI watchdog.
- *  Pavel Machek and
- *  Mikael Pettersson	: PM converted to driver model. Disable/enable API.
- */
-
-#include <asm/apic.h>
-
-#include <linux/nmi.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/sysdev.h>
-#include <linux/sysctl.h>
-#include <linux/percpu.h>
-#include <linux/kprobes.h>
-#include <linux/cpumask.h>
-#include <linux/kernel_stat.h>
-#include <linux/kdebug.h>
-#include <linux/smp.h>
-
-#include <asm/i8259.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/timer.h>
-
-#include <asm/mce.h>
-
-#include <asm/mach_traps.h>
-
-int unknown_nmi_panic;
-int nmi_watchdog_enabled;
-
-/* For reliability, we're prepared to waste bits here. */
-static DECLARE_BITMAP(backtrace_mask, NR_CPUS) __read_mostly;
-
-/* nmi_active:
- * >0: the lapic NMI watchdog is active, but can be disabled
- * <0: the lapic NMI watchdog has not been set up, and cannot
- *     be enabled
- *  0: the lapic NMI watchdog is disabled, but can be enabled
- */
-atomic_t nmi_active = ATOMIC_INIT(0);		/* oprofile uses this */
-EXPORT_SYMBOL(nmi_active);
-
-unsigned int nmi_watchdog = NMI_NONE;
-EXPORT_SYMBOL(nmi_watchdog);
-
-static int panic_on_timeout;
-
-static unsigned int nmi_hz = HZ;
-static DEFINE_PER_CPU(short, wd_enabled);
-static int endflag __initdata;
-
-static inline unsigned int get_nmi_count(int cpu)
-{
-	return per_cpu(irq_stat, cpu).__nmi_count;
-}
-
-static inline int mce_in_progress(void)
-{
-#if defined(CONFIG_X86_MCE)
-	return atomic_read(&mce_entry) > 0;
-#endif
-	return 0;
-}
-
-/*
- * Take the local apic timer and PIT/HPET into account. We don't
- * know which one is active, when we have highres/dyntick on
- */
-static inline unsigned int get_timer_irqs(int cpu)
-{
-	return per_cpu(irq_stat, cpu).apic_timer_irqs +
-		per_cpu(irq_stat, cpu).irq0_irqs;
-}
-
-#ifdef CONFIG_SMP
-/*
- * The performance counters used by NMI_LOCAL_APIC don't trigger when
- * the CPU is idle. To make sure the NMI watchdog really ticks on all
- * CPUs during the test make them busy.
- */
-static __init void nmi_cpu_busy(void *data)
-{
-	local_irq_enable_in_hardirq();
-	/*
-	 * Intentionally don't use cpu_relax here. This is
-	 * to make sure that the performance counter really ticks,
-	 * even if there is a simulator or similar that catches the
-	 * pause instruction. On a real HT machine this is fine because
-	 * all other CPUs are busy with "useless" delay loops and don't
-	 * care if they get somewhat less cycles.
-	 */
-	while (endflag == 0)
-		mb();
-}
-#endif
-
-static void report_broken_nmi(int cpu, unsigned int *prev_nmi_count)
-{
-	printk(KERN_CONT "\n");
-
-	printk(KERN_WARNING
-		"WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n",
-			cpu, prev_nmi_count[cpu], get_nmi_count(cpu));
-
-	printk(KERN_WARNING
-		"Please report this to bugzilla.kernel.org,\n");
-	printk(KERN_WARNING
-		"and attach the output of the 'dmesg' command.\n");
-
-	per_cpu(wd_enabled, cpu) = 0;
-	atomic_dec(&nmi_active);
-}
-
-static void __acpi_nmi_disable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
-}
-
-int __init check_nmi_watchdog(void)
-{
-	unsigned int *prev_nmi_count;
-	int cpu;
-
-	if (!nmi_watchdog_active() || !atomic_read(&nmi_active))
-		return 0;
-
-	prev_nmi_count = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL);
-	if (!prev_nmi_count)
-		goto error;
-
-	printk(KERN_INFO "Testing NMI watchdog ... ");
-
-#ifdef CONFIG_SMP
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
-#endif
-
-	for_each_possible_cpu(cpu)
-		prev_nmi_count[cpu] = get_nmi_count(cpu);
-	local_irq_enable();
-	mdelay((20 * 1000) / nmi_hz); /* wait 20 ticks */
-
-	for_each_online_cpu(cpu) {
-		if (!per_cpu(wd_enabled, cpu))
-			continue;
-		if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5)
-			report_broken_nmi(cpu, prev_nmi_count);
-	}
-	endflag = 1;
-	if (!atomic_read(&nmi_active)) {
-		kfree(prev_nmi_count);
-		atomic_set(&nmi_active, -1);
-		goto error;
-	}
-	printk("OK.\n");
-
-	/*
-	 * now that we know it works we can reduce NMI frequency to
-	 * something more reasonable; makes a difference in some configs
-	 */
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		nmi_hz = lapic_adjust_nmi_hz(1);
-
-	kfree(prev_nmi_count);
-	return 0;
-error:
-	if (nmi_watchdog == NMI_IO_APIC) {
-		if (!timer_through_8259)
-			legacy_pic->mask(0);
-		on_each_cpu(__acpi_nmi_disable, NULL, 1);
-	}
-
-#ifdef CONFIG_X86_32
-	timer_ack = 0;
-#endif
-	return -1;
-}
-
-static int __init setup_nmi_watchdog(char *str)
-{
-	unsigned int nmi;
-
-	if (!strncmp(str, "panic", 5)) {
-		panic_on_timeout = 1;
-		str = strchr(str, ',');
-		if (!str)
-			return 1;
-		++str;
-	}
-
-	if (!strncmp(str, "lapic", 5))
-		nmi_watchdog = NMI_LOCAL_APIC;
-	else if (!strncmp(str, "ioapic", 6))
-		nmi_watchdog = NMI_IO_APIC;
-	else {
-		get_option(&str, &nmi);
-		if (nmi >= NMI_INVALID)
-			return 0;
-		nmi_watchdog = nmi;
-	}
-
-	return 1;
-}
-__setup("nmi_watchdog=", setup_nmi_watchdog);
-
-/*
- * Suspend/resume support
- */
-#ifdef CONFIG_PM
-
-static int nmi_pm_active; /* nmi_active before suspend */
-
-static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	nmi_pm_active = atomic_read(&nmi_active);
-	stop_apic_nmi_watchdog(NULL);
-	BUG_ON(atomic_read(&nmi_active) != 0);
-	return 0;
-}
-
-static int lapic_nmi_resume(struct sys_device *dev)
-{
-	/* only CPU0 goes here, other CPUs should be offline */
-	if (nmi_pm_active > 0) {
-		setup_apic_nmi_watchdog(NULL);
-		touch_nmi_watchdog();
-	}
-	return 0;
-}
-
-static struct sysdev_class nmi_sysclass = {
-	.name		= "lapic_nmi",
-	.resume		= lapic_nmi_resume,
-	.suspend	= lapic_nmi_suspend,
-};
-
-static struct sys_device device_lapic_nmi = {
-	.id	= 0,
-	.cls	= &nmi_sysclass,
-};
-
-static int __init init_lapic_nmi_sysfs(void)
-{
-	int error;
-
-	/*
-	 * should really be a BUG_ON but b/c this is an
-	 * init call, it just doesn't work.  -dcz
-	 */
-	if (nmi_watchdog != NMI_LOCAL_APIC)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0)
-		return 0;
-
-	error = sysdev_class_register(&nmi_sysclass);
-	if (!error)
-		error = sysdev_register(&device_lapic_nmi);
-	return error;
-}
-
-/* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_sysfs);
-
-#endif	/* CONFIG_PM */
-
-static void __acpi_nmi_enable(void *__unused)
-{
-	apic_write(APIC_LVT0, APIC_DM_NMI);
-}
-
-/*
- * Enable timer based NMIs on all CPUs:
- */
-void acpi_nmi_enable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_enable, NULL, 1);
-}
-
-/*
- * Disable timer based NMIs on all CPUs:
- */
-void acpi_nmi_disable(void)
-{
-	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_disable, NULL, 1);
-}
-
-/*
- * This function is called as soon the LAPIC NMI watchdog driver has everything
- * in place and it's ready to check if the NMIs belong to the NMI watchdog
- */
-void cpu_nmi_set_wd_enabled(void)
-{
-	__get_cpu_var(wd_enabled) = 1;
-}
-
-void setup_apic_nmi_watchdog(void *unused)
-{
-	if (__get_cpu_var(wd_enabled))
-		return;
-
-	/* cheap hack to support suspend/resume */
-	/* if cpu0 is not active neither should the other cpus */
-	if (smp_processor_id() != 0 && atomic_read(&nmi_active) <= 0)
-		return;
-
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		if (lapic_watchdog_init(nmi_hz) < 0) {
-			__get_cpu_var(wd_enabled) = 0;
-			return;
-		}
-		/* FALL THROUGH */
-	case NMI_IO_APIC:
-		__get_cpu_var(wd_enabled) = 1;
-		atomic_inc(&nmi_active);
-	}
-}
-
-void stop_apic_nmi_watchdog(void *unused)
-{
-	/* only support LOCAL and IO APICs for now */
-	if (!nmi_watchdog_active())
-		return;
-	if (__get_cpu_var(wd_enabled) == 0)
-		return;
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		lapic_watchdog_stop();
-	else
-		__acpi_nmi_disable(NULL);
-	__get_cpu_var(wd_enabled) = 0;
-	atomic_dec(&nmi_active);
-}
-
-/*
- * the best way to detect whether a CPU has a 'hard lockup' problem
- * is to check it's local APIC timer IRQ counts. If they are not
- * changing then that CPU has some problem.
- *
- * as these watchdog NMI IRQs are generated on every CPU, we only
- * have to check the current processor.
- *
- * since NMIs don't listen to _any_ locks, we have to be extremely
- * careful not to rely on unsafe variables. The printk might lock
- * up though, so we have to break up any console locks first ...
- * [when there will be more tty-related locks, break them up here too!]
- */
-
-static DEFINE_PER_CPU(unsigned, last_irq_sum);
-static DEFINE_PER_CPU(long, alert_counter);
-static DEFINE_PER_CPU(int, nmi_touch);
-
-void touch_nmi_watchdog(void)
-{
-	if (nmi_watchdog_active()) {
-		unsigned cpu;
-
-		/*
-		 * Tell other CPUs to reset their alert counters. We cannot
-		 * do it ourselves because the alert count increase is not
-		 * atomic.
-		 */
-		for_each_present_cpu(cpu) {
-			if (per_cpu(nmi_touch, cpu) != 1)
-				per_cpu(nmi_touch, cpu) = 1;
-		}
-	}
-
-	/*
-	 * Tickle the softlockup detector too:
-	 */
-	touch_softlockup_watchdog();
-}
-EXPORT_SYMBOL(touch_nmi_watchdog);
-
-notrace __kprobes int
-nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
-{
-	/*
-	 * Since current_thread_info()-> is always on the stack, and we
-	 * always switch the stack NMI-atomically, it's safe to use
-	 * smp_processor_id().
-	 */
-	unsigned int sum;
-	int touched = 0;
-	int cpu = smp_processor_id();
-	int rc = 0;
-
-	sum = get_timer_irqs(cpu);
-
-	if (__get_cpu_var(nmi_touch)) {
-		__get_cpu_var(nmi_touch) = 0;
-		touched = 1;
-	}
-
-	/* We can be called before check_nmi_watchdog, hence NULL check. */
-	if (cpumask_test_cpu(cpu, to_cpumask(backtrace_mask))) {
-		static DEFINE_RAW_SPINLOCK(lock); /* Serialise the printks */
-
-		raw_spin_lock(&lock);
-		printk(KERN_WARNING "NMI backtrace for cpu %d\n", cpu);
-		show_regs(regs);
-		dump_stack();
-		raw_spin_unlock(&lock);
-		cpumask_clear_cpu(cpu, to_cpumask(backtrace_mask));
-
-		rc = 1;
-	}
-
-	/* Could check oops_in_progress here too, but it's safer not to */
-	if (mce_in_progress())
-		touched = 1;
-
-	/* if the none of the timers isn't firing, this cpu isn't doing much */
-	if (!touched && __get_cpu_var(last_irq_sum) == sum) {
-		/*
-		 * Ayiee, looks like this CPU is stuck ...
-		 * wait a few IRQs (5 seconds) before doing the oops ...
-		 */
-		__this_cpu_inc(alert_counter);
-		if (__this_cpu_read(alert_counter) == 5 * nmi_hz)
-			/*
-			 * die_nmi will return ONLY if NOTIFY_STOP happens..
-			 */
-			die_nmi("BUG: NMI Watchdog detected LOCKUP",
-				regs, panic_on_timeout);
-	} else {
-		__get_cpu_var(last_irq_sum) = sum;
-		__this_cpu_write(alert_counter, 0);
-	}
-
-	/* see if the nmi watchdog went off */
-	if (!__get_cpu_var(wd_enabled))
-		return rc;
-	switch (nmi_watchdog) {
-	case NMI_LOCAL_APIC:
-		rc |= lapic_wd_event(nmi_hz);
-		break;
-	case NMI_IO_APIC:
-		/*
-		 * don't know how to accurately check for this.
-		 * just assume it was a watchdog timer interrupt
-		 * This matches the old behaviour.
-		 */
-		rc = 1;
-		break;
-	}
-	return rc;
-}
-
-#ifdef CONFIG_SYSCTL
-
-static void enable_ioapic_nmi_watchdog_single(void *unused)
-{
-	__get_cpu_var(wd_enabled) = 1;
-	atomic_inc(&nmi_active);
-	__acpi_nmi_enable(NULL);
-}
-
-static void enable_ioapic_nmi_watchdog(void)
-{
-	on_each_cpu(enable_ioapic_nmi_watchdog_single, NULL, 1);
-	touch_nmi_watchdog();
-}
-
-static void disable_ioapic_nmi_watchdog(void)
-{
-	on_each_cpu(stop_apic_nmi_watchdog, NULL, 1);
-}
-
-static int __init setup_unknown_nmi_panic(char *str)
-{
-	unknown_nmi_panic = 1;
-	return 1;
-}
-__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
-
-static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
-{
-	unsigned char reason = get_nmi_reason();
-	char buf[64];
-
-	sprintf(buf, "NMI received for unknown reason %02x\n", reason);
-	die_nmi(buf, regs, 1); /* Always panic here */
-	return 0;
-}
-
-/*
- * proc handler for /proc/sys/kernel/nmi
- */
-int proc_nmi_enabled(struct ctl_table *table, int write,
-			void __user *buffer, size_t *length, loff_t *ppos)
-{
-	int old_state;
-
-	nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
-	old_state = nmi_watchdog_enabled;
-	proc_dointvec(table, write, buffer, length, ppos);
-	if (!!old_state == !!nmi_watchdog_enabled)
-		return 0;
-
-	if (atomic_read(&nmi_active) < 0 || !nmi_watchdog_active()) {
-		printk(KERN_WARNING
-			"NMI watchdog is permanently disabled\n");
-		return -EIO;
-	}
-
-	if (nmi_watchdog == NMI_LOCAL_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_lapic_nmi_watchdog();
-		else
-			disable_lapic_nmi_watchdog();
-	} else if (nmi_watchdog == NMI_IO_APIC) {
-		if (nmi_watchdog_enabled)
-			enable_ioapic_nmi_watchdog();
-		else
-			disable_ioapic_nmi_watchdog();
-	} else {
-		printk(KERN_WARNING
-			"NMI watchdog doesn't know what hardware to touch\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-#endif /* CONFIG_SYSCTL */
-
-int do_nmi_callback(struct pt_regs *regs, int cpu)
-{
-#ifdef CONFIG_SYSCTL
-	if (unknown_nmi_panic)
-		return unknown_nmi_panic_callback(regs, cpu);
-#endif
-	return 0;
-}
-
-void arch_trigger_all_cpu_backtrace(void)
-{
-	int i;
-
-	cpumask_copy(to_cpumask(backtrace_mask), cpu_online_mask);
-
-	printk(KERN_INFO "sending NMI to all CPUs:\n");
-	apic->send_IPI_all(NMI_VECTOR);
-
-	/* Wait for up to 10 seconds for all CPUs to do the backtrace */
-	for (i = 0; i < 10 * 1000; i++) {
-		if (cpumask_empty(to_cpumask(backtrace_mask)))
-			break;
-		mdelay(1);
-	}
-}
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index f9e4e6a5407..d8c4a6feb28 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -79,13 +79,6 @@ void __init default_setup_apic_routing(void)
 		/* need to update phys_pkg_id */
 		apic->phys_pkg_id = apicid_phys_pkg_id;
 	}
-
-	/*
-	 * Now that apic routing model is selected, configure the
-	 * fault handling for intr remapping.
-	 */
-	if (intr_remapping_enabled)
-		enable_drhd_fault_handling();
 }
 
 /* Same for both flat and physical. */
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index ed4118de249..ecca5f41ad2 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -44,8 +44,20 @@ static u64 gru_start_paddr, gru_end_paddr;
 static union uvh_apicid uvh_apicid;
 int uv_min_hub_revision_id;
 EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
+unsigned int uv_apicid_hibits;
+EXPORT_SYMBOL_GPL(uv_apicid_hibits);
 static DEFINE_SPINLOCK(uv_nmi_lock);
 
+static unsigned long __init uv_early_read_mmr(unsigned long addr)
+{
+	unsigned long val, *mmr;
+
+	mmr = early_ioremap(UV_LOCAL_MMR_BASE | addr, sizeof(*mmr));
+	val = *mmr;
+	early_iounmap(mmr, sizeof(*mmr));
+	return val;
+}
+
 static inline bool is_GRU_range(u64 start, u64 end)
 {
 	return start >= gru_start_paddr && end <= gru_end_paddr;
@@ -56,28 +68,24 @@ static bool uv_is_untracked_pat_range(u64 start, u64 end)
 	return is_ISA_range(start, end) || is_GRU_range(start, end);
 }
 
-static int early_get_nodeid(void)
+static int __init early_get_pnodeid(void)
 {
 	union uvh_node_id_u node_id;
-	unsigned long *mmr;
-
-	mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
-	node_id.v = *mmr;
-	early_iounmap(mmr, sizeof(*mmr));
+	union uvh_rh_gam_config_mmr_u  m_n_config;
+	int pnode;
 
 	/* Currently, all blades have same revision number */
+	node_id.v = uv_early_read_mmr(UVH_NODE_ID);
+	m_n_config.v = uv_early_read_mmr(UVH_RH_GAM_CONFIG_MMR);
 	uv_min_hub_revision_id = node_id.s.revision;
 
-	return node_id.s.node_id;
+	pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1);
+	return pnode;
 }
 
 static void __init early_get_apic_pnode_shift(void)
 {
-	unsigned long *mmr;
-
-	mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_APICID, sizeof(*mmr));
-	uvh_apicid.v = *mmr;
-	early_iounmap(mmr, sizeof(*mmr));
+	uvh_apicid.v = uv_early_read_mmr(UVH_APICID);
 	if (!uvh_apicid.v)
 		/*
 		 * Old bios, use default value
@@ -85,12 +93,25 @@ static void __init early_get_apic_pnode_shift(void)
 		uvh_apicid.s.pnode_shift = UV_APIC_PNODE_SHIFT;
 }
 
+/*
+ * Add an extra bit as dictated by bios to the destination apicid of
+ * interrupts potentially passing through the UV HUB.  This prevents
+ * a deadlock between interrupts and IO port operations.
+ */
+static void __init uv_set_apicid_hibit(void)
+{
+	union uvh_lb_target_physical_apic_id_mask_u apicid_mask;
+
+	apicid_mask.v = uv_early_read_mmr(UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK);
+	uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK;
+}
+
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	int nodeid;
+	int pnodeid;
 
 	if (!strcmp(oem_id, "SGI")) {
-		nodeid = early_get_nodeid();
+		pnodeid = early_get_pnodeid();
 		early_get_apic_pnode_shift();
 		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
 		x86_platform.nmi_init = uv_nmi_init;
@@ -99,9 +120,10 @@ static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 		else if (!strcmp(oem_table_id, "UVX"))
 			uv_system_type = UV_X2APIC;
 		else if (!strcmp(oem_table_id, "UVH")) {
-			__get_cpu_var(x2apic_extra_bits) =
-				nodeid << (uvh_apicid.s.pnode_shift - 1);
+			__this_cpu_write(x2apic_extra_bits,
+				pnodeid << uvh_apicid.s.pnode_shift);
 			uv_system_type = UV_NON_UNIQUE_APIC;
+			uv_set_apicid_hibit();
 			return 1;
 		}
 	}
@@ -155,6 +177,7 @@ static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_ri
 	int pnode;
 
 	pnode = uv_apicid_to_pnode(phys_apicid);
+	phys_apicid |= uv_apicid_hibits;
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	    ((start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
@@ -236,7 +259,7 @@ static unsigned int uv_cpu_mask_to_apicid(const struct cpumask *cpumask)
 	int cpu = cpumask_first(cpumask);
 
 	if ((unsigned)cpu < nr_cpu_ids)
-		return per_cpu(x86_cpu_to_apicid, cpu);
+		return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
 	else
 		return BAD_APICID;
 }
@@ -255,7 +278,7 @@ uv_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
 		if (cpumask_test_cpu(cpu, cpu_online_mask))
 			break;
 	}
-	return per_cpu(x86_cpu_to_apicid, cpu);
+	return per_cpu(x86_cpu_to_apicid, cpu) | uv_apicid_hibits;
 }
 
 static unsigned int x2apic_get_apic_id(unsigned long x)
@@ -263,7 +286,7 @@ static unsigned int x2apic_get_apic_id(unsigned long x)
 	unsigned int id;
 
 	WARN_ON(preemptible() && num_online_cpus() > 1);
-	id = x | __get_cpu_var(x2apic_extra_bits);
+	id = x | __this_cpu_read(x2apic_extra_bits);
 
 	return id;
 }
@@ -355,7 +378,7 @@ struct apic __refdata apic_x2apic_uv_x = {
 
 static __cpuinit void set_x2apic_extra_bits(int pnode)
 {
-	__get_cpu_var(x2apic_extra_bits) = (pnode << 6);
+	__this_cpu_write(x2apic_extra_bits, (pnode << 6));
 }
 
 /*
@@ -379,14 +402,14 @@ struct redir_addr {
 #define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
 
 static __initdata struct redir_addr redir_addrs[] = {
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
-	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR},
+	{UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR},
 };
 
 static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
 {
-	union uvh_si_alias0_overlay_config_u alias;
+	union uvh_rh_gam_alias210_overlay_config_2_mmr_u alias;
 	union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
 	int i;
 
@@ -660,28 +683,33 @@ void uv_nmi_init(void)
 
 void __init uv_system_init(void)
 {
-	union uvh_si_addr_map_config_u m_n_config;
+	union uvh_rh_gam_config_mmr_u  m_n_config;
+	union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh;
 	union uvh_node_id_u node_id;
 	unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
-	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
+	int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val, n_io;
 	int gnode_extra, max_pnode = 0;
 	unsigned long mmr_base, present, paddr;
-	unsigned short pnode_mask;
+	unsigned short pnode_mask, pnode_io_mask;
 
 	map_low_mmrs();
 
-	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+	m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
 	m_val = m_n_config.s.m_skt;
 	n_val = m_n_config.s.n_skt;
+	mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR);
+	n_io = mmioh.s.n_io;
 	mmr_base =
 	    uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
 	    ~UV_MMR_ENABLE;
 	pnode_mask = (1 << n_val) - 1;
+	pnode_io_mask = (1 << n_io) - 1;
+
 	node_id.v = uv_read_local_mmr(UVH_NODE_ID);
 	gnode_extra = (node_id.s.node_id & ~((1 << n_val) - 1)) >> 1;
 	gnode_upper = ((unsigned long)gnode_extra  << m_val);
-	printk(KERN_DEBUG "UV: N %d, M %d, gnode_upper 0x%lx, gnode_extra 0x%x\n",
-			n_val, m_val, gnode_upper, gnode_extra);
+	printk(KERN_INFO "UV: N %d, M %d, N_IO: %d, gnode_upper 0x%lx, gnode_extra 0x%x, pnode_mask 0x%x, pnode_io_mask 0x%x\n",
+			n_val, m_val, n_io, gnode_upper, gnode_extra, pnode_mask, pnode_io_mask);
 
 	printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
 
@@ -714,7 +742,7 @@ void __init uv_system_init(void)
 		for (j = 0; j < 64; j++) {
 			if (!test_bit(j, &present))
 				continue;
-			pnode = (i * 64 + j);
+			pnode = (i * 64 + j) & pnode_mask;
 			uv_blade_info[blade].pnode = pnode;
 			uv_blade_info[blade].nr_possible_cpus = 0;
 			uv_blade_info[blade].nr_online_cpus = 0;
@@ -735,6 +763,7 @@ void __init uv_system_init(void)
 		/*
 		 * apic_pnode_shift must be set before calling uv_apicid_to_pnode();
 		 */
+		uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
 		uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift;
 		pnode = uv_apicid_to_pnode(apicid);
 		blade = boot_pnode_to_blade(pnode);
@@ -751,7 +780,6 @@ void __init uv_system_init(void)
 		uv_cpu_hub_info(cpu)->numa_blade_id = blade;
 		uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
 		uv_cpu_hub_info(cpu)->pnode = pnode;
-		uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
 		uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1;
 		uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
 		uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
@@ -775,7 +803,7 @@ void __init uv_system_init(void)
 
 	map_gru_high(max_pnode);
 	map_mmr_high(max_pnode);
-	map_mmioh_high(max_pnode);
+	map_mmioh_high(max_pnode & pnode_io_mask);
 
 	uv_cpu_init();
 	uv_scir_register_cpu_notifier();
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 9e093f8fe78..7c7bedb83c5 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -668,7 +668,7 @@ EXPORT_SYMBOL_GPL(amd_erratum_383);
 
 bool cpu_has_amd_erratum(const int *erratum)
 {
-	struct cpuinfo_x86 *cpu = &current_cpu_data;
+	struct cpuinfo_x86 *cpu = __this_cpu_ptr(&cpu_info);
 	int osvw_id = *erratum++;
 	u32 range;
 	u32 ms;
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 4b68bda3093..1d59834396b 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -894,7 +894,6 @@ void __init identify_boot_cpu(void)
 #else
 	vgetcpu_set_mode();
 #endif
-	init_hw_perf_events();
 }
 
 void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 491977baf6c..35c7e65e59b 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -521,7 +521,7 @@ static void check_supported_cpu(void *_rc)
 
 	*rc = -ENODEV;
 
-	if (current_cpu_data.x86_vendor != X86_VENDOR_AMD)
+	if (__this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_AMD)
 		return;
 
 	eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
@@ -1377,7 +1377,7 @@ static int __devexit powernowk8_cpu_exit(struct cpufreq_policy *pol)
 static void query_values_on_cpu(void *_err)
 {
 	int *err = _err;
-	struct powernow_k8_data *data = __get_cpu_var(powernow_data);
+	struct powernow_k8_data *data = __this_cpu_read(powernow_data);
 
 	*err = query_current_values_with_pending_wait(data);
 }
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 17ad0336621..7283e98deaa 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -149,8 +149,7 @@ union _cpuid4_leaf_ecx {
 };
 
 struct amd_l3_cache {
-	struct	 pci_dev *dev;
-	bool	 can_disable;
+	struct	 amd_northbridge *nb;
 	unsigned indices;
 	u8	 subcaches[4];
 };
@@ -266,7 +265,7 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 		line_size = l2.line_size;
 		lines_per_tag = l2.lines_per_tag;
 		/* cpu_data has errata corrections for K7 applied */
-		size_in_kb = current_cpu_data.x86_cache_size;
+		size_in_kb = __this_cpu_read(cpu_info.x86_cache_size);
 		break;
 	case 3:
 		if (!l3.val)
@@ -288,7 +287,7 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
 	eax->split.type = types[leaf];
 	eax->split.level = levels[leaf];
 	eax->split.num_threads_sharing = 0;
-	eax->split.num_cores_on_die = current_cpu_data.x86_max_cores - 1;
+	eax->split.num_cores_on_die = __this_cpu_read(cpu_info.x86_max_cores) - 1;
 
 
 	if (assoc == 0xffff)
@@ -311,14 +310,12 @@ struct _cache_attr {
 /*
  * L3 cache descriptors
  */
-static struct amd_l3_cache **__cpuinitdata l3_caches;
-
 static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3)
 {
 	unsigned int sc0, sc1, sc2, sc3;
 	u32 val = 0;
 
-	pci_read_config_dword(l3->dev, 0x1C4, &val);
+	pci_read_config_dword(l3->nb->misc, 0x1C4, &val);
 
 	/* calculate subcache sizes */
 	l3->subcaches[0] = sc0 = !(val & BIT(0));
@@ -330,47 +327,14 @@ static void __cpuinit amd_calc_l3_indices(struct amd_l3_cache *l3)
 	l3->indices = (max(max3(sc0, sc1, sc2), sc3) << 10) - 1;
 }
 
-static struct amd_l3_cache * __cpuinit amd_init_l3_cache(int node)
-{
-	struct amd_l3_cache *l3;
-	struct pci_dev *dev = node_to_k8_nb_misc(node);
-
-	l3 = kzalloc(sizeof(struct amd_l3_cache), GFP_ATOMIC);
-	if (!l3) {
-		printk(KERN_WARNING "Error allocating L3 struct\n");
-		return NULL;
-	}
-
-	l3->dev = dev;
-
-	amd_calc_l3_indices(l3);
-
-	return l3;
-}
-
-static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf,
-					   int index)
+static void __cpuinit amd_init_l3_cache(struct _cpuid4_info_regs *this_leaf,
+					int index)
 {
+	static struct amd_l3_cache *__cpuinitdata l3_caches;
 	int node;
 
-	if (boot_cpu_data.x86 != 0x10)
-		return;
-
-	if (index < 3)
-		return;
-
-	/* see errata #382 and #388 */
-	if (boot_cpu_data.x86_model < 0x8)
-		return;
-
-	if ((boot_cpu_data.x86_model == 0x8 ||
-	     boot_cpu_data.x86_model == 0x9)
-		&&
-	     boot_cpu_data.x86_mask < 0x1)
-			return;
-
-	/* not in virtualized environments */
-	if (k8_northbridges.num == 0)
+	/* only for L3, and not in virtualized environments */
+	if (index < 3 || amd_nb_num() == 0)
 		return;
 
 	/*
@@ -378,7 +342,7 @@ static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf,
 	 * never freed but this is done only on shutdown so it doesn't matter.
 	 */
 	if (!l3_caches) {
-		int size = k8_northbridges.num * sizeof(struct amd_l3_cache *);
+		int size = amd_nb_num() * sizeof(struct amd_l3_cache);
 
 		l3_caches = kzalloc(size, GFP_ATOMIC);
 		if (!l3_caches)
@@ -387,14 +351,12 @@ static void __cpuinit amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf,
 
 	node = amd_get_nb_id(smp_processor_id());
 
-	if (!l3_caches[node]) {
-		l3_caches[node] = amd_init_l3_cache(node);
-		l3_caches[node]->can_disable = true;
+	if (!l3_caches[node].nb) {
+		l3_caches[node].nb = node_to_amd_nb(node);
+		amd_calc_l3_indices(&l3_caches[node]);
 	}
 
-	WARN_ON(!l3_caches[node]);
-
-	this_leaf->l3 = l3_caches[node];
+	this_leaf->l3 = &l3_caches[node];
 }
 
 /*
@@ -408,7 +370,7 @@ int amd_get_l3_disable_slot(struct amd_l3_cache *l3, unsigned slot)
 {
 	unsigned int reg = 0;
 
-	pci_read_config_dword(l3->dev, 0x1BC + slot * 4, &reg);
+	pci_read_config_dword(l3->nb->misc, 0x1BC + slot * 4, &reg);
 
 	/* check whether this slot is activated already */
 	if (reg & (3UL << 30))
@@ -422,7 +384,8 @@ static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf,
 {
 	int index;
 
-	if (!this_leaf->l3 || !this_leaf->l3->can_disable)
+	if (!this_leaf->l3 ||
+	    !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE))
 		return -EINVAL;
 
 	index = amd_get_l3_disable_slot(this_leaf->l3, slot);
@@ -457,7 +420,7 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu,
 		if (!l3->subcaches[i])
 			continue;
 
-		pci_write_config_dword(l3->dev, 0x1BC + slot * 4, reg);
+		pci_write_config_dword(l3->nb->misc, 0x1BC + slot * 4, reg);
 
 		/*
 		 * We need to WBINVD on a core on the node containing the L3
@@ -467,7 +430,7 @@ static void amd_l3_disable_index(struct amd_l3_cache *l3, int cpu,
 		wbinvd_on_cpu(cpu);
 
 		reg |= BIT(31);
-		pci_write_config_dword(l3->dev, 0x1BC + slot * 4, reg);
+		pci_write_config_dword(l3->nb->misc, 0x1BC + slot * 4, reg);
 	}
 }
 
@@ -524,7 +487,8 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	if (!this_leaf->l3 || !this_leaf->l3->can_disable)
+	if (!this_leaf->l3 ||
+	    !amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE))
 		return -EINVAL;
 
 	cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
@@ -545,7 +509,7 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
 #define STORE_CACHE_DISABLE(slot)					\
 static ssize_t								\
 store_cache_disable_##slot(struct _cpuid4_info *this_leaf,		\
-			    const char *buf, size_t count)		\
+			   const char *buf, size_t count)		\
 {									\
 	return store_cache_disable(this_leaf, buf, count, slot);	\
 }
@@ -558,10 +522,7 @@ static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
 		show_cache_disable_1, store_cache_disable_1);
 
 #else	/* CONFIG_AMD_NB */
-static void __cpuinit
-amd_check_l3_disable(struct _cpuid4_info_regs *this_leaf, int index)
-{
-};
+#define amd_init_l3_cache(x, y)
 #endif /* CONFIG_AMD_NB */
 
 static int
@@ -575,7 +536,7 @@ __cpuinit cpuid4_cache_lookup_regs(int index,
 
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
 		amd_cpuid4(index, &eax, &ebx, &ecx);
-		amd_check_l3_disable(this_leaf, index);
+		amd_init_l3_cache(this_leaf, index);
 	} else {
 		cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx);
 	}
@@ -983,30 +944,48 @@ define_one_ro(size);
 define_one_ro(shared_cpu_map);
 define_one_ro(shared_cpu_list);
 
-#define DEFAULT_SYSFS_CACHE_ATTRS	\
-	&type.attr,			\
-	&level.attr,			\
-	&coherency_line_size.attr,	\
-	&physical_line_partition.attr,	\
-	&ways_of_associativity.attr,	\
-	&number_of_sets.attr,		\
-	&size.attr,			\
-	&shared_cpu_map.attr,		\
-	&shared_cpu_list.attr
-
 static struct attribute *default_attrs[] = {
-	DEFAULT_SYSFS_CACHE_ATTRS,
+	&type.attr,
+	&level.attr,
+	&coherency_line_size.attr,
+	&physical_line_partition.attr,
+	&ways_of_associativity.attr,
+	&number_of_sets.attr,
+	&size.attr,
+	&shared_cpu_map.attr,
+	&shared_cpu_list.attr,
 	NULL
 };
 
-static struct attribute *default_l3_attrs[] = {
-	DEFAULT_SYSFS_CACHE_ATTRS,
 #ifdef CONFIG_AMD_NB
-	&cache_disable_0.attr,
-	&cache_disable_1.attr,
+static struct attribute ** __cpuinit amd_l3_attrs(void)
+{
+	static struct attribute **attrs;
+	int n;
+
+	if (attrs)
+		return attrs;
+
+	n = sizeof (default_attrs) / sizeof (struct attribute *);
+
+	if (amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE))
+		n += 2;
+
+	attrs = kzalloc(n * sizeof (struct attribute *), GFP_KERNEL);
+	if (attrs == NULL)
+		return attrs = default_attrs;
+
+	for (n = 0; default_attrs[n]; n++)
+		attrs[n] = default_attrs[n];
+
+	if (amd_nb_has_feature(AMD_NB_L3_INDEX_DISABLE)) {
+		attrs[n++] = &cache_disable_0.attr;
+		attrs[n++] = &cache_disable_1.attr;
+	}
+
+	return attrs;
+}
 #endif
-	NULL
-};
 
 static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
 {
@@ -1117,11 +1096,11 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 
 		this_leaf = CPUID4_INFO_IDX(cpu, i);
 
-		if (this_leaf->l3 && this_leaf->l3->can_disable)
-			ktype_cache.default_attrs = default_l3_attrs;
-		else
-			ktype_cache.default_attrs = default_attrs;
-
+		ktype_cache.default_attrs = default_attrs;
+#ifdef CONFIG_AMD_NB
+		if (this_leaf->l3)
+			ktype_cache.default_attrs = amd_l3_attrs();
+#endif
 		retval = kobject_init_and_add(&(this_object->kobj),
 					      &ktype_cache,
 					      per_cpu(ici_cache_kobject, cpu),
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 7a35b72d7c0..d916183b7f9 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -326,7 +326,7 @@ static void mce_panic(char *msg, struct mce *final, char *exp)
 
 static int msr_to_offset(u32 msr)
 {
-	unsigned bank = __get_cpu_var(injectm.bank);
+	unsigned bank = __this_cpu_read(injectm.bank);
 
 	if (msr == rip_msr)
 		return offsetof(struct mce, ip);
@@ -346,7 +346,7 @@ static u64 mce_rdmsrl(u32 msr)
 {
 	u64 v;
 
-	if (__get_cpu_var(injectm).finished) {
+	if (__this_cpu_read(injectm.finished)) {
 		int offset = msr_to_offset(msr);
 
 		if (offset < 0)
@@ -369,7 +369,7 @@ static u64 mce_rdmsrl(u32 msr)
 
 static void mce_wrmsrl(u32 msr, u64 v)
 {
-	if (__get_cpu_var(injectm).finished) {
+	if (__this_cpu_read(injectm.finished)) {
 		int offset = msr_to_offset(msr);
 
 		if (offset >= 0)
@@ -1159,7 +1159,7 @@ static void mce_start_timer(unsigned long data)
 
 	WARN_ON(smp_processor_id() != data);
 
-	if (mce_available(&current_cpu_data)) {
+	if (mce_available(__this_cpu_ptr(&cpu_info))) {
 		machine_check_poll(MCP_TIMESTAMP,
 				&__get_cpu_var(mce_poll_banks));
 	}
@@ -1767,7 +1767,7 @@ static int mce_shutdown(struct sys_device *dev)
 static int mce_resume(struct sys_device *dev)
 {
 	__mcheck_cpu_init_generic();
-	__mcheck_cpu_init_vendor(&current_cpu_data);
+	__mcheck_cpu_init_vendor(__this_cpu_ptr(&cpu_info));
 
 	return 0;
 }
@@ -1775,7 +1775,7 @@ static int mce_resume(struct sys_device *dev)
 static void mce_cpu_restart(void *data)
 {
 	del_timer_sync(&__get_cpu_var(mce_timer));
-	if (!mce_available(&current_cpu_data))
+	if (!mce_available(__this_cpu_ptr(&cpu_info)))
 		return;
 	__mcheck_cpu_init_generic();
 	__mcheck_cpu_init_timer();
@@ -1790,7 +1790,7 @@ static void mce_restart(void)
 /* Toggle features for corrected errors */
 static void mce_disable_ce(void *all)
 {
-	if (!mce_available(&current_cpu_data))
+	if (!mce_available(__this_cpu_ptr(&cpu_info)))
 		return;
 	if (all)
 		del_timer_sync(&__get_cpu_var(mce_timer));
@@ -1799,7 +1799,7 @@ static void mce_disable_ce(void *all)
 
 static void mce_enable_ce(void *all)
 {
-	if (!mce_available(&current_cpu_data))
+	if (!mce_available(__this_cpu_ptr(&cpu_info)))
 		return;
 	cmci_reenable();
 	cmci_recheck();
@@ -2022,7 +2022,7 @@ static void __cpuinit mce_disable_cpu(void *h)
 	unsigned long action = *(unsigned long *)h;
 	int i;
 
-	if (!mce_available(&current_cpu_data))
+	if (!mce_available(__this_cpu_ptr(&cpu_info)))
 		return;
 
 	if (!(action & CPU_TASKS_FROZEN))
@@ -2040,7 +2040,7 @@ static void __cpuinit mce_reenable_cpu(void *h)
 	unsigned long action = *(unsigned long *)h;
 	int i;
 
-	if (!mce_available(&current_cpu_data))
+	if (!mce_available(__this_cpu_ptr(&cpu_info)))
 		return;
 
 	if (!(action & CPU_TASKS_FROZEN))
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c
index 80c482382d5..5bf2fac52ac 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c
@@ -31,8 +31,6 @@
 #include <asm/mce.h>
 #include <asm/msr.h>
 
-#define PFX               "mce_threshold: "
-#define VERSION           "version 1.1.1"
 #define NR_BANKS          6
 #define NR_BLOCKS         9
 #define THRESHOLD_MAX     0xFFF
@@ -59,12 +57,6 @@ struct threshold_block {
 	struct list_head	miscj;
 };
 
-/* defaults used early on boot */
-static struct threshold_block threshold_defaults = {
-	.interrupt_enable	= 0,
-	.threshold_limit	= THRESHOLD_MAX,
-};
-
 struct threshold_bank {
 	struct kobject		*kobj;
 	struct threshold_block	*blocks;
@@ -89,50 +81,101 @@ static void amd_threshold_interrupt(void);
 struct thresh_restart {
 	struct threshold_block	*b;
 	int			reset;
+	int			set_lvt_off;
+	int			lvt_off;
 	u16			old_limit;
 };
 
+static int lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi)
+{
+	int msr = (hi & MASK_LVTOFF_HI) >> 20;
+
+	if (apic < 0) {
+		pr_err(FW_BUG "cpu %d, failed to setup threshold interrupt "
+		       "for bank %d, block %d (MSR%08X=0x%x%08x)\n", b->cpu,
+		       b->bank, b->block, b->address, hi, lo);
+		return 0;
+	}
+
+	if (apic != msr) {
+		pr_err(FW_BUG "cpu %d, invalid threshold interrupt offset %d "
+		       "for bank %d, block %d (MSR%08X=0x%x%08x)\n",
+		       b->cpu, apic, b->bank, b->block, b->address, hi, lo);
+		return 0;
+	}
+
+	return 1;
+};
+
 /* must be called with correct cpu affinity */
 /* Called via smp_call_function_single() */
 static void threshold_restart_bank(void *_tr)
 {
 	struct thresh_restart *tr = _tr;
-	u32 mci_misc_hi, mci_misc_lo;
+	u32 hi, lo;
 
-	rdmsr(tr->b->address, mci_misc_lo, mci_misc_hi);
+	rdmsr(tr->b->address, lo, hi);
 
-	if (tr->b->threshold_limit < (mci_misc_hi & THRESHOLD_MAX))
+	if (tr->b->threshold_limit < (hi & THRESHOLD_MAX))
 		tr->reset = 1;	/* limit cannot be lower than err count */
 
 	if (tr->reset) {		/* reset err count and overflow bit */
-		mci_misc_hi =
-		    (mci_misc_hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) |
+		hi =
+		    (hi & ~(MASK_ERR_COUNT_HI | MASK_OVERFLOW_HI)) |
 		    (THRESHOLD_MAX - tr->b->threshold_limit);
 	} else if (tr->old_limit) {	/* change limit w/o reset */
-		int new_count = (mci_misc_hi & THRESHOLD_MAX) +
+		int new_count = (hi & THRESHOLD_MAX) +
 		    (tr->old_limit - tr->b->threshold_limit);
 
-		mci_misc_hi = (mci_misc_hi & ~MASK_ERR_COUNT_HI) |
+		hi = (hi & ~MASK_ERR_COUNT_HI) |
 		    (new_count & THRESHOLD_MAX);
 	}
 
+	if (tr->set_lvt_off) {
+		if (lvt_off_valid(tr->b, tr->lvt_off, lo, hi)) {
+			/* set new lvt offset */
+			hi &= ~MASK_LVTOFF_HI;
+			hi |= tr->lvt_off << 20;
+		}
+	}
+
 	tr->b->interrupt_enable ?
-	    (mci_misc_hi = (mci_misc_hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) :
-	    (mci_misc_hi &= ~MASK_INT_TYPE_HI);
+	    (hi = (hi & ~MASK_INT_TYPE_HI) | INT_TYPE_APIC) :
+	    (hi &= ~MASK_INT_TYPE_HI);
 
-	mci_misc_hi |= MASK_COUNT_EN_HI;
-	wrmsr(tr->b->address, mci_misc_lo, mci_misc_hi);
+	hi |= MASK_COUNT_EN_HI;
+	wrmsr(tr->b->address, lo, hi);
+}
+
+static void mce_threshold_block_init(struct threshold_block *b, int offset)
+{
+	struct thresh_restart tr = {
+		.b			= b,
+		.set_lvt_off		= 1,
+		.lvt_off		= offset,
+	};
+
+	b->threshold_limit		= THRESHOLD_MAX;
+	threshold_restart_bank(&tr);
+};
+
+static int setup_APIC_mce(int reserved, int new)
+{
+	if (reserved < 0 && !setup_APIC_eilvt(new, THRESHOLD_APIC_VECTOR,
+					      APIC_EILVT_MSG_FIX, 0))
+		return new;
+
+	return reserved;
 }
 
 /* cpu init entry point, called from mce.c with preempt off */
 void mce_amd_feature_init(struct cpuinfo_x86 *c)
 {
+	struct threshold_block b;
 	unsigned int cpu = smp_processor_id();
 	u32 low = 0, high = 0, address = 0;
 	unsigned int bank, block;
-	struct thresh_restart tr;
-	int lvt_off = -1;
-	u8 offset;
+	int offset = -1;
 
 	for (bank = 0; bank < NR_BANKS; ++bank) {
 		for (block = 0; block < NR_BLOCKS; ++block) {
@@ -163,39 +206,16 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 			if (shared_bank[bank] && c->cpu_core_id)
 				break;
 #endif
-			offset = (high & MASK_LVTOFF_HI) >> 20;
-			if (lvt_off < 0) {
-				if (setup_APIC_eilvt(offset,
-						     THRESHOLD_APIC_VECTOR,
-						     APIC_EILVT_MSG_FIX, 0)) {
-					pr_err(FW_BUG "cpu %d, failed to "
-					       "setup threshold interrupt "
-					       "for bank %d, block %d "
-					       "(MSR%08X=0x%x%08x)",
-					       smp_processor_id(), bank, block,
-					       address, high, low);
-					continue;
-				}
-				lvt_off = offset;
-			} else if (lvt_off != offset) {
-				pr_err(FW_BUG "cpu %d, invalid threshold "
-				       "interrupt offset %d for bank %d,"
-				       "block %d (MSR%08X=0x%x%08x)",
-				       smp_processor_id(), lvt_off, bank,
-				       block, address, high, low);
-				continue;
-			}
-
-			high &= ~MASK_LVTOFF_HI;
-			high |= lvt_off << 20;
-			wrmsr(address, low, high);
+			offset = setup_APIC_mce(offset,
+						(high & MASK_LVTOFF_HI) >> 20);
 
-			threshold_defaults.address = address;
-			tr.b = &threshold_defaults;
-			tr.reset = 0;
-			tr.old_limit = 0;
-			threshold_restart_bank(&tr);
+			memset(&b, 0, sizeof(b));
+			b.cpu		= cpu;
+			b.bank		= bank;
+			b.block		= block;
+			b.address	= address;
 
+			mce_threshold_block_init(&b, offset);
 			mce_threshold_vector = amd_threshold_interrupt;
 		}
 	}
@@ -298,9 +318,8 @@ store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size)
 
 	b->interrupt_enable = !!new;
 
+	memset(&tr, 0, sizeof(tr));
 	tr.b		= b;
-	tr.reset	= 0;
-	tr.old_limit	= 0;
 
 	smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
 
@@ -321,10 +340,10 @@ store_threshold_limit(struct threshold_block *b, const char *buf, size_t size)
 	if (new < 1)
 		new = 1;
 
+	memset(&tr, 0, sizeof(tr));
 	tr.old_limit = b->threshold_limit;
 	b->threshold_limit = new;
 	tr.b = b;
-	tr.reset = 0;
 
 	smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1);
 
@@ -603,9 +622,9 @@ static __cpuinit int threshold_create_device(unsigned int cpu)
 			continue;
 		err = threshold_create_bank(cpu, bank);
 		if (err)
-			goto out;
+			return err;
 	}
-out:
+
 	return err;
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel.c b/arch/x86/kernel/cpu/mcheck/mce_intel.c
index 6fcd0936194..8694ef56459 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel.c
@@ -130,7 +130,7 @@ void cmci_recheck(void)
 	unsigned long flags;
 	int banks;
 
-	if (!mce_available(&current_cpu_data) || !cmci_supported(&banks))
+	if (!mce_available(__this_cpu_ptr(&cpu_info)) || !cmci_supported(&banks))
 		return;
 	local_irq_save(flags);
 	machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned));
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 4b683267eca..e12246ff5aa 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -53,8 +53,13 @@ struct thermal_state {
 	struct _thermal_state core_power_limit;
 	struct _thermal_state package_throttle;
 	struct _thermal_state package_power_limit;
+	struct _thermal_state core_thresh0;
+	struct _thermal_state core_thresh1;
 };
 
+/* Callback to handle core threshold interrupts */
+int (*platform_thermal_notify)(__u64 msr_val);
+
 static DEFINE_PER_CPU(struct thermal_state, thermal_state);
 
 static atomic_t therm_throt_en	= ATOMIC_INIT(0);
@@ -200,6 +205,22 @@ static int therm_throt_process(bool new_event, int event, int level)
 	return 0;
 }
 
+static int thresh_event_valid(int event)
+{
+	struct _thermal_state *state;
+	unsigned int this_cpu = smp_processor_id();
+	struct thermal_state *pstate = &per_cpu(thermal_state, this_cpu);
+	u64 now = get_jiffies_64();
+
+	state = (event == 0) ? &pstate->core_thresh0 : &pstate->core_thresh1;
+
+	if (time_before64(now, state->next_check))
+		return 0;
+
+	state->next_check = now + CHECK_INTERVAL;
+	return 1;
+}
+
 #ifdef CONFIG_SYSFS
 /* Add/Remove thermal_throttle interface for CPU device: */
 static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev,
@@ -313,6 +334,22 @@ device_initcall(thermal_throttle_init_device);
 #define PACKAGE_THROTTLED	((__u64)2 << 62)
 #define PACKAGE_POWER_LIMIT	((__u64)3 << 62)
 
+static void notify_thresholds(__u64 msr_val)
+{
+	/* check whether the interrupt handler is defined;
+	 * otherwise simply return
+	 */
+	if (!platform_thermal_notify)
+		return;
+
+	/* lower threshold reached */
+	if ((msr_val & THERM_LOG_THRESHOLD0) &&	thresh_event_valid(0))
+		platform_thermal_notify(msr_val);
+	/* higher threshold reached */
+	if ((msr_val & THERM_LOG_THRESHOLD1) && thresh_event_valid(1))
+		platform_thermal_notify(msr_val);
+}
+
 /* Thermal transition interrupt handler */
 static void intel_thermal_interrupt(void)
 {
@@ -321,6 +358,9 @@ static void intel_thermal_interrupt(void)
 
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
 
+	/* Check for violation of core thermal thresholds*/
+	notify_thresholds(msr_val);
+
 	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT,
 				THERMAL_THROTTLING_EVENT,
 				CORE_LEVEL) != 0)
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index ed6310183ef..04921017abe 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -330,9 +330,6 @@ static bool reserve_pmc_hardware(void)
 {
 	int i;
 
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		disable_lapic_nmi_watchdog();
-
 	for (i = 0; i < x86_pmu.num_counters; i++) {
 		if (!reserve_perfctr_nmi(x86_pmu.perfctr + i))
 			goto perfctr_fail;
@@ -355,9 +352,6 @@ perfctr_fail:
 	for (i--; i >= 0; i--)
 		release_perfctr_nmi(x86_pmu.perfctr + i);
 
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		enable_lapic_nmi_watchdog();
-
 	return false;
 }
 
@@ -369,9 +363,6 @@ static void release_pmc_hardware(void)
 		release_perfctr_nmi(x86_pmu.perfctr + i);
 		release_evntsel_nmi(x86_pmu.eventsel + i);
 	}
-
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		enable_lapic_nmi_watchdog();
 }
 
 #else
@@ -381,6 +372,58 @@ static void release_pmc_hardware(void) {}
 
 #endif
 
+static bool check_hw_exists(void)
+{
+	u64 val, val_new = 0;
+	int i, reg, ret = 0;
+
+	/*
+	 * Check to see if the BIOS enabled any of the counters, if so
+	 * complain and bail.
+	 */
+	for (i = 0; i < x86_pmu.num_counters; i++) {
+		reg = x86_pmu.eventsel + i;
+		ret = rdmsrl_safe(reg, &val);
+		if (ret)
+			goto msr_fail;
+		if (val & ARCH_PERFMON_EVENTSEL_ENABLE)
+			goto bios_fail;
+	}
+
+	if (x86_pmu.num_counters_fixed) {
+		reg = MSR_ARCH_PERFMON_FIXED_CTR_CTRL;
+		ret = rdmsrl_safe(reg, &val);
+		if (ret)
+			goto msr_fail;
+		for (i = 0; i < x86_pmu.num_counters_fixed; i++) {
+			if (val & (0x03 << i*4))
+				goto bios_fail;
+		}
+	}
+
+	/*
+	 * Now write a value and read it back to see if it matches,
+	 * this is needed to detect certain hardware emulators (qemu/kvm)
+	 * that don't trap on the MSR access and always return 0s.
+	 */
+	val = 0xabcdUL;
+	ret = checking_wrmsrl(x86_pmu.perfctr, val);
+	ret |= rdmsrl_safe(x86_pmu.perfctr, &val_new);
+	if (ret || val != val_new)
+		goto msr_fail;
+
+	return true;
+
+bios_fail:
+	printk(KERN_CONT "Broken BIOS detected, using software events only.\n");
+	printk(KERN_ERR FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n", reg, val);
+	return false;
+
+msr_fail:
+	printk(KERN_CONT "Broken PMU hardware detected, using software events only.\n");
+	return false;
+}
+
 static void reserve_ds_buffers(void);
 static void release_ds_buffers(void);
 
@@ -437,7 +480,7 @@ static int x86_setup_perfctr(struct perf_event *event)
 	struct hw_perf_event *hwc = &event->hw;
 	u64 config;
 
-	if (!hwc->sample_period) {
+	if (!is_sampling_event(event)) {
 		hwc->sample_period = x86_pmu.max_period;
 		hwc->last_period = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
@@ -954,8 +997,7 @@ x86_perf_event_set_period(struct perf_event *event)
 
 static void x86_pmu_enable_event(struct perf_event *event)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-	if (cpuc->enabled)
+	if (__this_cpu_read(cpu_hw_events.enabled))
 		__x86_pmu_enable_event(&event->hw,
 				       ARCH_PERFMON_EVENTSEL_ENABLE);
 }
@@ -1229,7 +1271,7 @@ perf_event_nmi_handler(struct notifier_block *self,
 		break;
 	case DIE_NMIUNKNOWN:
 		this_nmi = percpu_read(irq_stat.__nmi_count);
-		if (this_nmi != __get_cpu_var(pmu_nmi).marked)
+		if (this_nmi != __this_cpu_read(pmu_nmi.marked))
 			/* let the kernel handle the unknown nmi */
 			return NOTIFY_DONE;
 		/*
@@ -1253,8 +1295,8 @@ perf_event_nmi_handler(struct notifier_block *self,
 	this_nmi = percpu_read(irq_stat.__nmi_count);
 	if ((handled > 1) ||
 		/* the next nmi could be a back-to-back nmi */
-	    ((__get_cpu_var(pmu_nmi).marked == this_nmi) &&
-	     (__get_cpu_var(pmu_nmi).handled > 1))) {
+	    ((__this_cpu_read(pmu_nmi.marked) == this_nmi) &&
+	     (__this_cpu_read(pmu_nmi.handled) > 1))) {
 		/*
 		 * We could have two subsequent back-to-back nmis: The
 		 * first handles more than one counter, the 2nd
@@ -1265,8 +1307,8 @@ perf_event_nmi_handler(struct notifier_block *self,
 		 * handling more than one counter. We will mark the
 		 * next (3rd) and then drop it if unhandled.
 		 */
-		__get_cpu_var(pmu_nmi).marked	= this_nmi + 1;
-		__get_cpu_var(pmu_nmi).handled	= handled;
+		__this_cpu_write(pmu_nmi.marked, this_nmi + 1);
+		__this_cpu_write(pmu_nmi.handled, handled);
 	}
 
 	return NOTIFY_STOP;
@@ -1348,7 +1390,7 @@ static void __init pmu_check_apic(void)
 	pr_info("no hardware sampling interrupt available.\n");
 }
 
-void __init init_hw_perf_events(void)
+int __init init_hw_perf_events(void)
 {
 	struct event_constraint *c;
 	int err;
@@ -1363,15 +1405,19 @@ void __init init_hw_perf_events(void)
 		err = amd_pmu_init();
 		break;
 	default:
-		return;
+		return 0;
 	}
 	if (err != 0) {
 		pr_cont("no PMU driver, software events only.\n");
-		return;
+		return 0;
 	}
 
 	pmu_check_apic();
 
+	/* sanity check that the hardware exists or is emulated */
+	if (!check_hw_exists())
+		return 0;
+
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
 	if (x86_pmu.quirks)
@@ -1418,9 +1464,12 @@ void __init init_hw_perf_events(void)
 	pr_info("... fixed-purpose events:   %d\n",     x86_pmu.num_counters_fixed);
 	pr_info("... event mask:             %016Lx\n", x86_pmu.intel_ctrl);
 
-	perf_pmu_register(&pmu);
+	perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
 	perf_cpu_notifier(x86_pmu_notifier);
+
+	return 0;
 }
+early_initcall(init_hw_perf_events);
 
 static inline void x86_pmu_read(struct perf_event *event)
 {
@@ -1434,11 +1483,9 @@ static inline void x86_pmu_read(struct perf_event *event)
  */
 static void x86_pmu_start_txn(struct pmu *pmu)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
 	perf_pmu_disable(pmu);
-	cpuc->group_flag |= PERF_EVENT_TXN;
-	cpuc->n_txn = 0;
+	__this_cpu_or(cpu_hw_events.group_flag, PERF_EVENT_TXN);
+	__this_cpu_write(cpu_hw_events.n_txn, 0);
 }
 
 /*
@@ -1448,14 +1495,12 @@ static void x86_pmu_start_txn(struct pmu *pmu)
  */
 static void x86_pmu_cancel_txn(struct pmu *pmu)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
-	cpuc->group_flag &= ~PERF_EVENT_TXN;
+	__this_cpu_and(cpu_hw_events.group_flag, ~PERF_EVENT_TXN);
 	/*
 	 * Truncate the collected events.
 	 */
-	cpuc->n_added -= cpuc->n_txn;
-	cpuc->n_events -= cpuc->n_txn;
+	__this_cpu_sub(cpu_hw_events.n_added, __this_cpu_read(cpu_hw_events.n_txn));
+	__this_cpu_sub(cpu_hw_events.n_events, __this_cpu_read(cpu_hw_events.n_txn));
 	perf_pmu_enable(pmu);
 }
 
@@ -1666,7 +1711,7 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs)
 
 	perf_callchain_store(entry, regs->ip);
 
-	dump_trace(NULL, regs, NULL, regs->bp, &backtrace_ops, entry);
+	dump_trace(NULL, regs, NULL, &backtrace_ops, entry);
 }
 
 #ifdef CONFIG_COMPAT
diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c
index 46d58448c3a..67e2202a603 100644
--- a/arch/x86/kernel/cpu/perf_event_amd.c
+++ b/arch/x86/kernel/cpu/perf_event_amd.c
@@ -1,7 +1,5 @@
 #ifdef CONFIG_CPU_SUP_AMD
 
-static DEFINE_RAW_SPINLOCK(amd_nb_lock);
-
 static __initconst const u64 amd_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
 				[PERF_COUNT_HW_CACHE_OP_MAX]
@@ -275,17 +273,17 @@ done:
 	return &emptyconstraint;
 }
 
-static struct amd_nb *amd_alloc_nb(int cpu, int nb_id)
+static struct amd_nb *amd_alloc_nb(int cpu)
 {
 	struct amd_nb *nb;
 	int i;
 
-	nb = kmalloc(sizeof(struct amd_nb), GFP_KERNEL);
+	nb = kmalloc_node(sizeof(struct amd_nb), GFP_KERNEL | __GFP_ZERO,
+			  cpu_to_node(cpu));
 	if (!nb)
 		return NULL;
 
-	memset(nb, 0, sizeof(*nb));
-	nb->nb_id = nb_id;
+	nb->nb_id = -1;
 
 	/*
 	 * initialize all possible NB constraints
@@ -306,7 +304,7 @@ static int amd_pmu_cpu_prepare(int cpu)
 	if (boot_cpu_data.x86_max_cores < 2)
 		return NOTIFY_OK;
 
-	cpuc->amd_nb = amd_alloc_nb(cpu, -1);
+	cpuc->amd_nb = amd_alloc_nb(cpu);
 	if (!cpuc->amd_nb)
 		return NOTIFY_BAD;
 
@@ -325,8 +323,6 @@ static void amd_pmu_cpu_starting(int cpu)
 	nb_id = amd_get_nb_id(cpu);
 	WARN_ON_ONCE(nb_id == BAD_APICID);
 
-	raw_spin_lock(&amd_nb_lock);
-
 	for_each_online_cpu(i) {
 		nb = per_cpu(cpu_hw_events, i).amd_nb;
 		if (WARN_ON_ONCE(!nb))
@@ -341,8 +337,6 @@ static void amd_pmu_cpu_starting(int cpu)
 
 	cpuc->amd_nb->nb_id = nb_id;
 	cpuc->amd_nb->refcnt++;
-
-	raw_spin_unlock(&amd_nb_lock);
 }
 
 static void amd_pmu_cpu_dead(int cpu)
@@ -354,8 +348,6 @@ static void amd_pmu_cpu_dead(int cpu)
 
 	cpuhw = &per_cpu(cpu_hw_events, cpu);
 
-	raw_spin_lock(&amd_nb_lock);
-
 	if (cpuhw->amd_nb) {
 		struct amd_nb *nb = cpuhw->amd_nb;
 
@@ -364,8 +356,6 @@ static void amd_pmu_cpu_dead(int cpu)
 
 		cpuhw->amd_nb = NULL;
 	}
-
-	raw_spin_unlock(&amd_nb_lock);
 }
 
 static __initconst const struct x86_pmu amd_pmu = {
diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c
index c8f5c088cad..008835c1d79 100644
--- a/arch/x86/kernel/cpu/perf_event_intel.c
+++ b/arch/x86/kernel/cpu/perf_event_intel.c
@@ -649,7 +649,7 @@ static void intel_pmu_enable_event(struct perf_event *event)
 	struct hw_perf_event *hwc = &event->hw;
 
 	if (unlikely(hwc->idx == X86_PMC_IDX_FIXED_BTS)) {
-		if (!__get_cpu_var(cpu_hw_events).enabled)
+		if (!__this_cpu_read(cpu_hw_events.enabled))
 			return;
 
 		intel_pmu_enable_bts(hwc->config);
@@ -679,7 +679,7 @@ static int intel_pmu_save_and_restart(struct perf_event *event)
 
 static void intel_pmu_reset(void)
 {
-	struct debug_store *ds = __get_cpu_var(cpu_hw_events).ds;
+	struct debug_store *ds = __this_cpu_read(cpu_hw_events.ds);
 	unsigned long flags;
 	int idx;
 
@@ -816,6 +816,32 @@ static int intel_pmu_hw_config(struct perf_event *event)
 	if (ret)
 		return ret;
 
+	if (event->attr.precise_ip &&
+	    (event->hw.config & X86_RAW_EVENT_MASK) == 0x003c) {
+		/*
+		 * Use an alternative encoding for CPU_CLK_UNHALTED.THREAD_P
+		 * (0x003c) so that we can use it with PEBS.
+		 *
+		 * The regular CPU_CLK_UNHALTED.THREAD_P event (0x003c) isn't
+		 * PEBS capable. However we can use INST_RETIRED.ANY_P
+		 * (0x00c0), which is a PEBS capable event, to get the same
+		 * count.
+		 *
+		 * INST_RETIRED.ANY_P counts the number of cycles that retires
+		 * CNTMASK instructions. By setting CNTMASK to a value (16)
+		 * larger than the maximum number of instructions that can be
+		 * retired per cycle (4) and then inverting the condition, we
+		 * count all cycles that retire 16 or less instructions, which
+		 * is every cycle.
+		 *
+		 * Thereby we gain a PEBS capable cycle counter.
+		 */
+		u64 alt_config = 0x108000c0; /* INST_RETIRED.TOTAL_CYCLES */
+
+		alt_config |= (event->hw.config & ~X86_RAW_EVENT_MASK);
+		event->hw.config = alt_config;
+	}
+
 	if (event->attr.type != PERF_TYPE_RAW)
 		return 0;
 
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index d9f4ff8fcd6..d5a23661550 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -16,32 +16,12 @@
 #include <linux/kernel.h>
 #include <linux/bitops.h>
 #include <linux/smp.h>
-#include <linux/nmi.h>
+#include <asm/nmi.h>
 #include <linux/kprobes.h>
 
 #include <asm/apic.h>
 #include <asm/perf_event.h>
 
-struct nmi_watchdog_ctlblk {
-	unsigned int cccr_msr;
-	unsigned int perfctr_msr;  /* the MSR to reset in NMI handler */
-	unsigned int evntsel_msr;  /* the MSR to select the events to handle */
-};
-
-/* Interface defining a CPU specific perfctr watchdog */
-struct wd_ops {
-	int (*reserve)(void);
-	void (*unreserve)(void);
-	int (*setup)(unsigned nmi_hz);
-	void (*rearm)(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz);
-	void (*stop)(void);
-	unsigned perfctr;
-	unsigned evntsel;
-	u64 checkbit;
-};
-
-static const struct wd_ops *wd_ops;
-
 /*
  * this number is calculated from Intel's MSR_P4_CRU_ESCR5 register and it's
  * offset from MSR_P4_BSU_ESCR0.
@@ -60,8 +40,6 @@ static const struct wd_ops *wd_ops;
 static DECLARE_BITMAP(perfctr_nmi_owner, NMI_MAX_COUNTER_BITS);
 static DECLARE_BITMAP(evntsel_nmi_owner, NMI_MAX_COUNTER_BITS);
 
-static DEFINE_PER_CPU(struct nmi_watchdog_ctlblk, nmi_watchdog_ctlblk);
-
 /* converts an msr to an appropriate reservation bit */
 static inline unsigned int nmi_perfctr_msr_to_bit(unsigned int msr)
 {
@@ -172,623 +150,3 @@ void release_evntsel_nmi(unsigned int msr)
 	clear_bit(counter, evntsel_nmi_owner);
 }
 EXPORT_SYMBOL(release_evntsel_nmi);
-
-void disable_lapic_nmi_watchdog(void)
-{
-	BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
-
-	if (atomic_read(&nmi_active) <= 0)
-		return;
-
-	on_each_cpu(stop_apic_nmi_watchdog, NULL, 1);
-
-	if (wd_ops)
-		wd_ops->unreserve();
-
-	BUG_ON(atomic_read(&nmi_active) != 0);
-}
-
-void enable_lapic_nmi_watchdog(void)
-{
-	BUG_ON(nmi_watchdog != NMI_LOCAL_APIC);
-
-	/* are we already enabled */
-	if (atomic_read(&nmi_active) != 0)
-		return;
-
-	/* are we lapic aware */
-	if (!wd_ops)
-		return;
-	if (!wd_ops->reserve()) {
-		printk(KERN_ERR "NMI watchdog: cannot reserve perfctrs\n");
-		return;
-	}
-
-	on_each_cpu(setup_apic_nmi_watchdog, NULL, 1);
-	touch_nmi_watchdog();
-}
-
-/*
- * Activate the NMI watchdog via the local APIC.
- */
-
-static unsigned int adjust_for_32bit_ctr(unsigned int hz)
-{
-	u64 counter_val;
-	unsigned int retval = hz;
-
-	/*
-	 * On Intel CPUs with P6/ARCH_PERFMON only 32 bits in the counter
-	 * are writable, with higher bits sign extending from bit 31.
-	 * So, we can only program the counter with 31 bit values and
-	 * 32nd bit should be 1, for 33.. to be 1.
-	 * Find the appropriate nmi_hz
-	 */
-	counter_val = (u64)cpu_khz * 1000;
-	do_div(counter_val, retval);
-	if (counter_val > 0x7fffffffULL) {
-		u64 count = (u64)cpu_khz * 1000;
-		do_div(count, 0x7fffffffUL);
-		retval = count + 1;
-	}
-	return retval;
-}
-
-static void write_watchdog_counter(unsigned int perfctr_msr,
-				const char *descr, unsigned nmi_hz)
-{
-	u64 count = (u64)cpu_khz * 1000;
-
-	do_div(count, nmi_hz);
-	if (descr)
-		pr_debug("setting %s to -0x%08Lx\n", descr, count);
-	wrmsrl(perfctr_msr, 0 - count);
-}
-
-static void write_watchdog_counter32(unsigned int perfctr_msr,
-				const char *descr, unsigned nmi_hz)
-{
-	u64 count = (u64)cpu_khz * 1000;
-
-	do_div(count, nmi_hz);
-	if (descr)
-		pr_debug("setting %s to -0x%08Lx\n", descr, count);
-	wrmsr(perfctr_msr, (u32)(-count), 0);
-}
-
-/*
- * AMD K7/K8/Family10h/Family11h support.
- * AMD keeps this interface nicely stable so there is not much variety
- */
-#define K7_EVNTSEL_ENABLE	(1 << 22)
-#define K7_EVNTSEL_INT		(1 << 20)
-#define K7_EVNTSEL_OS		(1 << 17)
-#define K7_EVNTSEL_USR		(1 << 16)
-#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING	0x76
-#define K7_NMI_EVENT		K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
-
-static int setup_k7_watchdog(unsigned nmi_hz)
-{
-	unsigned int perfctr_msr, evntsel_msr;
-	unsigned int evntsel;
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	perfctr_msr = wd_ops->perfctr;
-	evntsel_msr = wd_ops->evntsel;
-
-	wrmsrl(perfctr_msr, 0UL);
-
-	evntsel = K7_EVNTSEL_INT
-		| K7_EVNTSEL_OS
-		| K7_EVNTSEL_USR
-		| K7_NMI_EVENT;
-
-	/* setup the timer */
-	wrmsr(evntsel_msr, evntsel, 0);
-	write_watchdog_counter(perfctr_msr, "K7_PERFCTR0", nmi_hz);
-
-	/* initialize the wd struct before enabling */
-	wd->perfctr_msr = perfctr_msr;
-	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  /* unused */
-
-	/* ok, everything is initialized, announce that we're set */
-	cpu_nmi_set_wd_enabled();
-
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= K7_EVNTSEL_ENABLE;
-	wrmsr(evntsel_msr, evntsel, 0);
-
-	return 1;
-}
-
-static void single_msr_stop_watchdog(void)
-{
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	wrmsr(wd->evntsel_msr, 0, 0);
-}
-
-static int single_msr_reserve(void)
-{
-	if (!reserve_perfctr_nmi(wd_ops->perfctr))
-		return 0;
-
-	if (!reserve_evntsel_nmi(wd_ops->evntsel)) {
-		release_perfctr_nmi(wd_ops->perfctr);
-		return 0;
-	}
-	return 1;
-}
-
-static void single_msr_unreserve(void)
-{
-	release_evntsel_nmi(wd_ops->evntsel);
-	release_perfctr_nmi(wd_ops->perfctr);
-}
-
-static void __kprobes
-single_msr_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
-{
-	/* start the cycle over again */
-	write_watchdog_counter(wd->perfctr_msr, NULL, nmi_hz);
-}
-
-static const struct wd_ops k7_wd_ops = {
-	.reserve	= single_msr_reserve,
-	.unreserve	= single_msr_unreserve,
-	.setup		= setup_k7_watchdog,
-	.rearm		= single_msr_rearm,
-	.stop		= single_msr_stop_watchdog,
-	.perfctr	= MSR_K7_PERFCTR0,
-	.evntsel	= MSR_K7_EVNTSEL0,
-	.checkbit	= 1ULL << 47,
-};
-
-/*
- * Intel Model 6 (PPro+,P2,P3,P-M,Core1)
- */
-#define P6_EVNTSEL0_ENABLE	(1 << 22)
-#define P6_EVNTSEL_INT		(1 << 20)
-#define P6_EVNTSEL_OS		(1 << 17)
-#define P6_EVNTSEL_USR		(1 << 16)
-#define P6_EVENT_CPU_CLOCKS_NOT_HALTED	0x79
-#define P6_NMI_EVENT		P6_EVENT_CPU_CLOCKS_NOT_HALTED
-
-static int setup_p6_watchdog(unsigned nmi_hz)
-{
-	unsigned int perfctr_msr, evntsel_msr;
-	unsigned int evntsel;
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	perfctr_msr = wd_ops->perfctr;
-	evntsel_msr = wd_ops->evntsel;
-
-	/* KVM doesn't implement this MSR */
-	if (wrmsr_safe(perfctr_msr, 0, 0) < 0)
-		return 0;
-
-	evntsel = P6_EVNTSEL_INT
-		| P6_EVNTSEL_OS
-		| P6_EVNTSEL_USR
-		| P6_NMI_EVENT;
-
-	/* setup the timer */
-	wrmsr(evntsel_msr, evntsel, 0);
-	nmi_hz = adjust_for_32bit_ctr(nmi_hz);
-	write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0", nmi_hz);
-
-	/* initialize the wd struct before enabling */
-	wd->perfctr_msr = perfctr_msr;
-	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  /* unused */
-
-	/* ok, everything is initialized, announce that we're set */
-	cpu_nmi_set_wd_enabled();
-
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= P6_EVNTSEL0_ENABLE;
-	wrmsr(evntsel_msr, evntsel, 0);
-
-	return 1;
-}
-
-static void __kprobes p6_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
-{
-	/*
-	 * P6 based Pentium M need to re-unmask
-	 * the apic vector but it doesn't hurt
-	 * other P6 variant.
-	 * ArchPerfom/Core Duo also needs this
-	 */
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-
-	/* P6/ARCH_PERFMON has 32 bit counter write */
-	write_watchdog_counter32(wd->perfctr_msr, NULL, nmi_hz);
-}
-
-static const struct wd_ops p6_wd_ops = {
-	.reserve	= single_msr_reserve,
-	.unreserve	= single_msr_unreserve,
-	.setup		= setup_p6_watchdog,
-	.rearm		= p6_rearm,
-	.stop		= single_msr_stop_watchdog,
-	.perfctr	= MSR_P6_PERFCTR0,
-	.evntsel	= MSR_P6_EVNTSEL0,
-	.checkbit	= 1ULL << 39,
-};
-
-/*
- * Intel P4 performance counters.
- * By far the most complicated of all.
- */
-#define MSR_P4_MISC_ENABLE_PERF_AVAIL	(1 << 7)
-#define P4_ESCR_EVENT_SELECT(N)	((N) << 25)
-#define P4_ESCR_OS		(1 << 3)
-#define P4_ESCR_USR		(1 << 2)
-#define P4_CCCR_OVF_PMI0	(1 << 26)
-#define P4_CCCR_OVF_PMI1	(1 << 27)
-#define P4_CCCR_THRESHOLD(N)	((N) << 20)
-#define P4_CCCR_COMPLEMENT	(1 << 19)
-#define P4_CCCR_COMPARE		(1 << 18)
-#define P4_CCCR_REQUIRED	(3 << 16)
-#define P4_CCCR_ESCR_SELECT(N)	((N) << 13)
-#define P4_CCCR_ENABLE		(1 << 12)
-#define P4_CCCR_OVF 		(1 << 31)
-
-#define P4_CONTROLS 18
-static unsigned int p4_controls[18] = {
-	MSR_P4_BPU_CCCR0,
-	MSR_P4_BPU_CCCR1,
-	MSR_P4_BPU_CCCR2,
-	MSR_P4_BPU_CCCR3,
-	MSR_P4_MS_CCCR0,
-	MSR_P4_MS_CCCR1,
-	MSR_P4_MS_CCCR2,
-	MSR_P4_MS_CCCR3,
-	MSR_P4_FLAME_CCCR0,
-	MSR_P4_FLAME_CCCR1,
-	MSR_P4_FLAME_CCCR2,
-	MSR_P4_FLAME_CCCR3,
-	MSR_P4_IQ_CCCR0,
-	MSR_P4_IQ_CCCR1,
-	MSR_P4_IQ_CCCR2,
-	MSR_P4_IQ_CCCR3,
-	MSR_P4_IQ_CCCR4,
-	MSR_P4_IQ_CCCR5,
-};
-/*
- * Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
- * CRU_ESCR0 (with any non-null event selector) through a complemented
- * max threshold. [IA32-Vol3, Section 14.9.9]
- */
-static int setup_p4_watchdog(unsigned nmi_hz)
-{
-	unsigned int perfctr_msr, evntsel_msr, cccr_msr;
-	unsigned int evntsel, cccr_val;
-	unsigned int misc_enable, dummy;
-	unsigned int ht_num;
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	rdmsr(MSR_IA32_MISC_ENABLE, misc_enable, dummy);
-	if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
-		return 0;
-
-#ifdef CONFIG_SMP
-	/* detect which hyperthread we are on */
-	if (smp_num_siblings == 2) {
-		unsigned int ebx, apicid;
-
-		ebx = cpuid_ebx(1);
-		apicid = (ebx >> 24) & 0xff;
-		ht_num = apicid & 1;
-	} else
-#endif
-		ht_num = 0;
-
-	/*
-	 * performance counters are shared resources
-	 * assign each hyperthread its own set
-	 * (re-use the ESCR0 register, seems safe
-	 * and keeps the cccr_val the same)
-	 */
-	if (!ht_num) {
-		/* logical cpu 0 */
-		perfctr_msr = MSR_P4_IQ_PERFCTR0;
-		evntsel_msr = MSR_P4_CRU_ESCR0;
-		cccr_msr = MSR_P4_IQ_CCCR0;
-		cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4);
-
-		/*
-		 * If we're on the kdump kernel or other situation, we may
-		 * still have other performance counter registers set to
-		 * interrupt and they'll keep interrupting forever because
-		 * of the P4_CCCR_OVF quirk. So we need to ACK all the
-		 * pending interrupts and disable all the registers here,
-		 * before reenabling the NMI delivery. Refer to p4_rearm()
-		 * about the P4_CCCR_OVF quirk.
-		 */
-		if (reset_devices) {
-			unsigned int low, high;
-			int i;
-
-			for (i = 0; i < P4_CONTROLS; i++) {
-				rdmsr(p4_controls[i], low, high);
-				low &= ~(P4_CCCR_ENABLE | P4_CCCR_OVF);
-				wrmsr(p4_controls[i], low, high);
-			}
-		}
-	} else {
-		/* logical cpu 1 */
-		perfctr_msr = MSR_P4_IQ_PERFCTR1;
-		evntsel_msr = MSR_P4_CRU_ESCR0;
-		cccr_msr = MSR_P4_IQ_CCCR1;
-
-		/* Pentium 4 D processors don't support P4_CCCR_OVF_PMI1 */
-		if (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask == 4)
-			cccr_val = P4_CCCR_OVF_PMI0;
-		else
-			cccr_val = P4_CCCR_OVF_PMI1;
-		cccr_val |= P4_CCCR_ESCR_SELECT(4);
-	}
-
-	evntsel = P4_ESCR_EVENT_SELECT(0x3F)
-		| P4_ESCR_OS
-		| P4_ESCR_USR;
-
-	cccr_val |= P4_CCCR_THRESHOLD(15)
-		 | P4_CCCR_COMPLEMENT
-		 | P4_CCCR_COMPARE
-		 | P4_CCCR_REQUIRED;
-
-	wrmsr(evntsel_msr, evntsel, 0);
-	wrmsr(cccr_msr, cccr_val, 0);
-	write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0", nmi_hz);
-
-	wd->perfctr_msr = perfctr_msr;
-	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = cccr_msr;
-
-	/* ok, everything is initialized, announce that we're set */
-	cpu_nmi_set_wd_enabled();
-
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	cccr_val |= P4_CCCR_ENABLE;
-	wrmsr(cccr_msr, cccr_val, 0);
-	return 1;
-}
-
-static void stop_p4_watchdog(void)
-{
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-	wrmsr(wd->cccr_msr, 0, 0);
-	wrmsr(wd->evntsel_msr, 0, 0);
-}
-
-static int p4_reserve(void)
-{
-	if (!reserve_perfctr_nmi(MSR_P4_IQ_PERFCTR0))
-		return 0;
-#ifdef CONFIG_SMP
-	if (smp_num_siblings > 1 && !reserve_perfctr_nmi(MSR_P4_IQ_PERFCTR1))
-		goto fail1;
-#endif
-	if (!reserve_evntsel_nmi(MSR_P4_CRU_ESCR0))
-		goto fail2;
-	/* RED-PEN why is ESCR1 not reserved here? */
-	return 1;
- fail2:
-#ifdef CONFIG_SMP
-	if (smp_num_siblings > 1)
-		release_perfctr_nmi(MSR_P4_IQ_PERFCTR1);
- fail1:
-#endif
-	release_perfctr_nmi(MSR_P4_IQ_PERFCTR0);
-	return 0;
-}
-
-static void p4_unreserve(void)
-{
-#ifdef CONFIG_SMP
-	if (smp_num_siblings > 1)
-		release_perfctr_nmi(MSR_P4_IQ_PERFCTR1);
-#endif
-	release_evntsel_nmi(MSR_P4_CRU_ESCR0);
-	release_perfctr_nmi(MSR_P4_IQ_PERFCTR0);
-}
-
-static void __kprobes p4_rearm(struct nmi_watchdog_ctlblk *wd, unsigned nmi_hz)
-{
-	unsigned dummy;
-	/*
-	 * P4 quirks:
-	 * - An overflown perfctr will assert its interrupt
-	 *   until the OVF flag in its CCCR is cleared.
-	 * - LVTPC is masked on interrupt and must be
-	 *   unmasked by the LVTPC handler.
-	 */
-	rdmsrl(wd->cccr_msr, dummy);
-	dummy &= ~P4_CCCR_OVF;
-	wrmsrl(wd->cccr_msr, dummy);
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	/* start the cycle over again */
-	write_watchdog_counter(wd->perfctr_msr, NULL, nmi_hz);
-}
-
-static const struct wd_ops p4_wd_ops = {
-	.reserve	= p4_reserve,
-	.unreserve	= p4_unreserve,
-	.setup		= setup_p4_watchdog,
-	.rearm		= p4_rearm,
-	.stop		= stop_p4_watchdog,
-	/* RED-PEN this is wrong for the other sibling */
-	.perfctr	= MSR_P4_BPU_PERFCTR0,
-	.evntsel	= MSR_P4_BSU_ESCR0,
-	.checkbit	= 1ULL << 39,
-};
-
-/*
- * Watchdog using the Intel architected PerfMon.
- * Used for Core2 and hopefully all future Intel CPUs.
- */
-#define ARCH_PERFMON_NMI_EVENT_SEL	ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
-#define ARCH_PERFMON_NMI_EVENT_UMASK	ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK
-
-static struct wd_ops intel_arch_wd_ops;
-
-static int setup_intel_arch_watchdog(unsigned nmi_hz)
-{
-	unsigned int ebx;
-	union cpuid10_eax eax;
-	unsigned int unused;
-	unsigned int perfctr_msr, evntsel_msr;
-	unsigned int evntsel;
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-
-	/*
-	 * Check whether the Architectural PerfMon supports
-	 * Unhalted Core Cycles Event or not.
-	 * NOTE: Corresponding bit = 0 in ebx indicates event present.
-	 */
-	cpuid(10, &(eax.full), &ebx, &unused, &unused);
-	if ((eax.split.mask_length <
-			(ARCH_PERFMON_UNHALTED_CORE_CYCLES_INDEX+1)) ||
-	    (ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
-		return 0;
-
-	perfctr_msr = wd_ops->perfctr;
-	evntsel_msr = wd_ops->evntsel;
-
-	wrmsrl(perfctr_msr, 0UL);
-
-	evntsel = ARCH_PERFMON_EVENTSEL_INT
-		| ARCH_PERFMON_EVENTSEL_OS
-		| ARCH_PERFMON_EVENTSEL_USR
-		| ARCH_PERFMON_NMI_EVENT_SEL
-		| ARCH_PERFMON_NMI_EVENT_UMASK;
-
-	/* setup the timer */
-	wrmsr(evntsel_msr, evntsel, 0);
-	nmi_hz = adjust_for_32bit_ctr(nmi_hz);
-	write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0", nmi_hz);
-
-	wd->perfctr_msr = perfctr_msr;
-	wd->evntsel_msr = evntsel_msr;
-	wd->cccr_msr = 0;  /* unused */
-
-	/* ok, everything is initialized, announce that we're set */
-	cpu_nmi_set_wd_enabled();
-
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-	evntsel |= ARCH_PERFMON_EVENTSEL_ENABLE;
-	wrmsr(evntsel_msr, evntsel, 0);
-	intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1);
-	return 1;
-}
-
-static struct wd_ops intel_arch_wd_ops __read_mostly = {
-	.reserve	= single_msr_reserve,
-	.unreserve	= single_msr_unreserve,
-	.setup		= setup_intel_arch_watchdog,
-	.rearm		= p6_rearm,
-	.stop		= single_msr_stop_watchdog,
-	.perfctr	= MSR_ARCH_PERFMON_PERFCTR1,
-	.evntsel	= MSR_ARCH_PERFMON_EVENTSEL1,
-};
-
-static void probe_nmi_watchdog(void)
-{
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_AMD:
-		if (boot_cpu_data.x86 == 6 ||
-		    (boot_cpu_data.x86 >= 0xf && boot_cpu_data.x86 <= 0x15))
-			wd_ops = &k7_wd_ops;
-		return;
-	case X86_VENDOR_INTEL:
-		/* Work around where perfctr1 doesn't have a working enable
-		 * bit as described in the following errata:
-		 * AE49 Core Duo and Intel Core Solo 65 nm
-		 * AN49 Intel Pentium Dual-Core
-		 * AF49 Dual-Core Intel Xeon Processor LV
-		 */
-		if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 14) ||
-		    ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 15 &&
-		     boot_cpu_data.x86_mask == 4))) {
-			intel_arch_wd_ops.perfctr = MSR_ARCH_PERFMON_PERFCTR0;
-			intel_arch_wd_ops.evntsel = MSR_ARCH_PERFMON_EVENTSEL0;
-		}
-		if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
-			wd_ops = &intel_arch_wd_ops;
-			break;
-		}
-		switch (boot_cpu_data.x86) {
-		case 6:
-			if (boot_cpu_data.x86_model > 13)
-				return;
-
-			wd_ops = &p6_wd_ops;
-			break;
-		case 15:
-			wd_ops = &p4_wd_ops;
-			break;
-		default:
-			return;
-		}
-		break;
-	}
-}
-
-/* Interface to nmi.c */
-
-int lapic_watchdog_init(unsigned nmi_hz)
-{
-	if (!wd_ops) {
-		probe_nmi_watchdog();
-		if (!wd_ops) {
-			printk(KERN_INFO "NMI watchdog: CPU not supported\n");
-			return -1;
-		}
-
-		if (!wd_ops->reserve()) {
-			printk(KERN_ERR
-				"NMI watchdog: cannot reserve perfctrs\n");
-			return -1;
-		}
-	}
-
-	if (!(wd_ops->setup(nmi_hz))) {
-		printk(KERN_ERR "Cannot setup NMI watchdog on CPU %d\n",
-		       raw_smp_processor_id());
-		return -1;
-	}
-
-	return 0;
-}
-
-void lapic_watchdog_stop(void)
-{
-	if (wd_ops)
-		wd_ops->stop();
-}
-
-unsigned lapic_adjust_nmi_hz(unsigned hz)
-{
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-	if (wd->perfctr_msr == MSR_P6_PERFCTR0 ||
-	    wd->perfctr_msr == MSR_ARCH_PERFMON_PERFCTR1)
-		hz = adjust_for_32bit_ctr(hz);
-	return hz;
-}
-
-int __kprobes lapic_wd_event(unsigned nmi_hz)
-{
-	struct nmi_watchdog_ctlblk *wd = &__get_cpu_var(nmi_watchdog_ctlblk);
-	u64 ctr;
-
-	rdmsrl(wd->perfctr_msr, ctr);
-	if (ctr & wd_ops->checkbit) /* perfctr still running? */
-		return 0;
-
-	wd_ops->rearm(wd, nmi_hz);
-	return 1;
-}
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 1b7b31ab7d8..212a6a42527 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -33,7 +33,6 @@
 #include <linux/init.h>
 #include <linux/poll.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/device.h>
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 6e8752c1bd5..8474c998cbd 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -175,21 +175,21 @@ static const struct stacktrace_ops print_trace_ops = {
 
 void
 show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp, char *log_lvl)
+		unsigned long *stack, char *log_lvl)
 {
 	printk("%sCall Trace:\n", log_lvl);
-	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
+	dump_trace(task, regs, stack, &print_trace_ops, log_lvl);
 }
 
 void show_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp)
+		unsigned long *stack)
 {
-	show_trace_log_lvl(task, regs, stack, bp, "");
+	show_trace_log_lvl(task, regs, stack, "");
 }
 
 void show_stack(struct task_struct *task, unsigned long *sp)
 {
-	show_stack_log_lvl(task, NULL, sp, 0, "");
+	show_stack_log_lvl(task, NULL, sp, "");
 }
 
 /*
@@ -210,7 +210,7 @@ void dump_stack(void)
 		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
-	show_trace(NULL, NULL, &stack, bp);
+	show_trace(NULL, NULL, &stack);
 }
 EXPORT_SYMBOL(dump_stack);
 
diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c
index 1bc7f75a5bd..74cc1eda384 100644
--- a/arch/x86/kernel/dumpstack_32.c
+++ b/arch/x86/kernel/dumpstack_32.c
@@ -17,11 +17,12 @@
 #include <asm/stacktrace.h>
 
 
-void dump_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp,
+void dump_trace(struct task_struct *task,
+		struct pt_regs *regs, unsigned long *stack,
 		const struct stacktrace_ops *ops, void *data)
 {
 	int graph = 0;
+	unsigned long bp;
 
 	if (!task)
 		task = current;
@@ -34,18 +35,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 			stack = (unsigned long *)task->thread.sp;
 	}
 
-#ifdef CONFIG_FRAME_POINTER
-	if (!bp) {
-		if (task == current) {
-			/* Grab bp right from our regs */
-			get_bp(bp);
-		} else {
-			/* bp is the last reg pushed by switch_to */
-			bp = *(unsigned long *) task->thread.sp;
-		}
-	}
-#endif
-
+	bp = stack_frame(task, regs);
 	for (;;) {
 		struct thread_info *context;
 
@@ -65,7 +55,7 @@ EXPORT_SYMBOL(dump_trace);
 
 void
 show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		   unsigned long *sp, unsigned long bp, char *log_lvl)
+		   unsigned long *sp, char *log_lvl)
 {
 	unsigned long *stack;
 	int i;
@@ -87,7 +77,7 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 		touch_nmi_watchdog();
 	}
 	printk(KERN_CONT "\n");
-	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
+	show_trace_log_lvl(task, regs, sp, log_lvl);
 }
 
 
@@ -112,8 +102,7 @@ void show_registers(struct pt_regs *regs)
 		u8 *ip;
 
 		printk(KERN_EMERG "Stack:\n");
-		show_stack_log_lvl(NULL, regs, &regs->sp,
-				0, KERN_EMERG);
+		show_stack_log_lvl(NULL, regs, &regs->sp, KERN_EMERG);
 
 		printk(KERN_EMERG "Code: ");
 
diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c
index 6a340485249..64101335de1 100644
--- a/arch/x86/kernel/dumpstack_64.c
+++ b/arch/x86/kernel/dumpstack_64.c
@@ -139,8 +139,8 @@ fixup_bp_irq_link(unsigned long bp, unsigned long *stack,
  * severe exception (double fault, nmi, stack fault, debug, mce) hardware stack
  */
 
-void dump_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp,
+void dump_trace(struct task_struct *task,
+		struct pt_regs *regs, unsigned long *stack,
 		const struct stacktrace_ops *ops, void *data)
 {
 	const unsigned cpu = get_cpu();
@@ -149,6 +149,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 	unsigned used = 0;
 	struct thread_info *tinfo;
 	int graph = 0;
+	unsigned long bp;
 
 	if (!task)
 		task = current;
@@ -160,18 +161,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 			stack = (unsigned long *)task->thread.sp;
 	}
 
-#ifdef CONFIG_FRAME_POINTER
-	if (!bp) {
-		if (task == current) {
-			/* Grab bp right from our regs */
-			get_bp(bp);
-		} else {
-			/* bp is the last reg pushed by switch_to */
-			bp = *(unsigned long *) task->thread.sp;
-		}
-	}
-#endif
-
+	bp = stack_frame(task, regs);
 	/*
 	 * Print function call entries in all stacks, starting at the
 	 * current stack address. If the stacks consist of nested
@@ -235,7 +225,7 @@ EXPORT_SYMBOL(dump_trace);
 
 void
 show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		   unsigned long *sp, unsigned long bp, char *log_lvl)
+		   unsigned long *sp, char *log_lvl)
 {
 	unsigned long *irq_stack_end;
 	unsigned long *irq_stack;
@@ -279,7 +269,7 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 	preempt_enable();
 
 	printk(KERN_CONT "\n");
-	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
+	show_trace_log_lvl(task, regs, sp, log_lvl);
 }
 
 void show_registers(struct pt_regs *regs)
@@ -308,7 +298,7 @@ void show_registers(struct pt_regs *regs)
 
 		printk(KERN_EMERG "Stack:\n");
 		show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
-				regs->bp, KERN_EMERG);
+				   KERN_EMERG);
 
 		printk(KERN_EMERG "Code: ");
 
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 4572f25f932..cd28a350f7f 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -240,7 +240,7 @@ static int __init setup_early_printk(char *buf)
 		if (!strncmp(buf, "xen", 3))
 			early_console_register(&xenboot_console, keep);
 #endif
-#ifdef CONFIG_X86_MRST_EARLY_PRINTK
+#ifdef CONFIG_EARLY_PRINTK_MRST
 		if (!strncmp(buf, "mrst", 4)) {
 			mrst_early_console_init();
 			early_console_register(&early_mrst_console, keep);
@@ -250,7 +250,6 @@ static int __init setup_early_printk(char *buf)
 			hsu_early_console_init();
 			early_console_register(&early_hsu_console, keep);
 		}
-
 #endif
 		buf++;
 	}
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 59e175e8959..591e6010427 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -395,7 +395,7 @@ sysenter_past_esp:
 	 * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
 	 * pushed above; +8 corresponds to copy_thread's esp0 setting.
 	 */
-	pushl_cfi (TI_sysenter_return-THREAD_SIZE_asm+8+4*4)(%esp)
+	pushl_cfi ((TI_sysenter_return)-THREAD_SIZE_asm+8+4*4)(%esp)
 	CFI_REL_OFFSET eip, 0
 
 	pushl_cfi %eax
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index fe2690d71c0..e3ba417e869 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -295,6 +295,7 @@ ENDPROC(native_usergs_sysret64)
 	.endm
 
 /* save partial stack frame */
+	.pushsection .kprobes.text, "ax"
 ENTRY(save_args)
 	XCPT_FRAME
 	cld
@@ -334,6 +335,7 @@ ENTRY(save_args)
 	ret
 	CFI_ENDPROC
 END(save_args)
+	.popsection
 
 ENTRY(save_rest)
 	PARTIAL_FRAME 1 REST_SKIP+8
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 3afb33f14d2..382eb2936d4 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -19,6 +19,7 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/list.h>
+#include <linux/module.h>
 
 #include <trace/syscall.h>
 
@@ -49,6 +50,7 @@ static DEFINE_PER_CPU(int, save_modifying_code);
 int ftrace_arch_code_modify_prepare(void)
 {
 	set_kernel_text_rw();
+	set_all_modules_text_rw();
 	modifying_code = 1;
 	return 0;
 }
@@ -56,6 +58,7 @@ int ftrace_arch_code_modify_prepare(void)
 int ftrace_arch_code_modify_post_process(void)
 {
 	modifying_code = 0;
+	set_all_modules_text_ro();
 	set_kernel_text_ro();
 	return 0;
 }
@@ -167,9 +170,9 @@ static void ftrace_mod_code(void)
 
 void ftrace_nmi_enter(void)
 {
-	__get_cpu_var(save_modifying_code) = modifying_code;
+	__this_cpu_write(save_modifying_code, modifying_code);
 
-	if (!__get_cpu_var(save_modifying_code))
+	if (!__this_cpu_read(save_modifying_code))
 		return;
 
 	if (atomic_inc_return(&nmi_running) & MOD_CODE_WRITE_FLAG) {
@@ -183,7 +186,7 @@ void ftrace_nmi_enter(void)
 
 void ftrace_nmi_exit(void)
 {
-	if (!__get_cpu_var(save_modifying_code))
+	if (!__this_cpu_read(save_modifying_code))
 		return;
 
 	/* Finish all executions before clearing nmi_running */
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
index 763310165fa..7f138b3c3c5 100644
--- a/arch/x86/kernel/head32.c
+++ b/arch/x86/kernel/head32.c
@@ -61,6 +61,9 @@ void __init i386_start_kernel(void)
 	case X86_SUBARCH_MRST:
 		x86_mrst_early_setup();
 		break;
+	case X86_SUBARCH_CE4100:
+		x86_ce4100_early_setup();
+		break;
 	default:
 		i386_default_early_setup();
 		break;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index bcece91dd31..9f54b209c37 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -60,16 +60,18 @@
 #define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
 #endif
 
+/* Number of possible pages in the lowmem region */
+LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
+	
 /* Enough space to fit pagetables for the low memory linear map */
-MAPPING_BEYOND_END = \
-	PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
 
 /*
  * Worst-case size of the kernel mapping we need to make:
- * the worst-case size of the kernel itself, plus the extra we need
- * to map for the linear map.
+ * a relocatable kernel can live anywhere in lowmem, so we need to be able
+ * to map all of lowmem.
  */
-KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT
+KERNEL_PAGES = LOWMEM_PAGES
 
 INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm
 RESERVE_BRK(pagetables, INIT_MAP_SIZE)
@@ -137,39 +139,6 @@ ENTRY(startup_32)
 	movl %eax, pa(olpc_ofw_pgd)
 #endif
 
-#ifdef CONFIG_PARAVIRT
-	/* This is can only trip for a broken bootloader... */
-	cmpw $0x207, pa(boot_params + BP_version)
-	jb default_entry
-
-	/* Paravirt-compatible boot parameters.  Look to see what architecture
-		we're booting under. */
-	movl pa(boot_params + BP_hardware_subarch), %eax
-	cmpl $num_subarch_entries, %eax
-	jae bad_subarch
-
-	movl pa(subarch_entries)(,%eax,4), %eax
-	subl $__PAGE_OFFSET, %eax
-	jmp *%eax
-
-bad_subarch:
-WEAK(lguest_entry)
-WEAK(xen_entry)
-	/* Unknown implementation; there's really
-	   nothing we can do at this point. */
-	ud2a
-
-	__INITDATA
-
-subarch_entries:
-	.long default_entry		/* normal x86/PC */
-	.long lguest_entry		/* lguest hypervisor */
-	.long xen_entry			/* Xen hypervisor */
-	.long default_entry		/* Moorestown MID */
-num_subarch_entries = (. - subarch_entries) / 4
-.previous
-#endif /* CONFIG_PARAVIRT */
-
 /*
  * Initialize page tables.  This creates a PDE and a set of page
  * tables, which are located immediately beyond __brk_base.  The variable
@@ -179,7 +148,6 @@ num_subarch_entries = (. - subarch_entries) / 4
  *
  * Note that the stack is not yet set up!
  */
-default_entry:
 #ifdef CONFIG_X86_PAE
 
 	/*
@@ -259,7 +227,42 @@ page_pde_offset = (__PAGE_OFFSET >> 20);
 	movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
 	movl %eax,pa(initial_page_table+0xffc)
 #endif
-	jmp 3f
+
+#ifdef CONFIG_PARAVIRT
+	/* This is can only trip for a broken bootloader... */
+	cmpw $0x207, pa(boot_params + BP_version)
+	jb default_entry
+
+	/* Paravirt-compatible boot parameters.  Look to see what architecture
+		we're booting under. */
+	movl pa(boot_params + BP_hardware_subarch), %eax
+	cmpl $num_subarch_entries, %eax
+	jae bad_subarch
+
+	movl pa(subarch_entries)(,%eax,4), %eax
+	subl $__PAGE_OFFSET, %eax
+	jmp *%eax
+
+bad_subarch:
+WEAK(lguest_entry)
+WEAK(xen_entry)
+	/* Unknown implementation; there's really
+	   nothing we can do at this point. */
+	ud2a
+
+	__INITDATA
+
+subarch_entries:
+	.long default_entry		/* normal x86/PC */
+	.long lguest_entry		/* lguest hypervisor */
+	.long xen_entry			/* Xen hypervisor */
+	.long default_entry		/* Moorestown MID */
+num_subarch_entries = (. - subarch_entries) / 4
+.previous
+#else
+	jmp default_entry
+#endif /* CONFIG_PARAVIRT */
+
 /*
  * Non-boot CPU entry point; entered from trampoline.S
  * We can't lgdt here, because lgdt itself uses a data segment, but
@@ -280,7 +283,7 @@ ENTRY(startup_32_smp)
 	movl %eax,%fs
 	movl %eax,%gs
 #endif /* CONFIG_SMP */
-3:
+default_entry:
 
 /*
  *	New page tables may be in 4Mbyte page mode and may
@@ -314,6 +317,10 @@ ENTRY(startup_32_smp)
 	subl $0x80000001, %eax
 	cmpl $(0x8000ffff-0x80000001), %eax
 	ja 6f
+
+	/* Clear bogus XD_DISABLE bits */
+	call verify_cpu
+
 	mov $0x80000001, %eax
 	cpuid
 	/* Execute Disable bit supported? */
@@ -609,6 +616,8 @@ ignore_int:
 #endif
 	iret
 
+#include "verify_cpu.S"
+
 	__REFDATA
 .align 4
 ENTRY(initial_code)
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index ae03cab4352..4ff5968f12d 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -27,6 +27,9 @@
 #define HPET_DEV_FSB_CAP		0x1000
 #define HPET_DEV_PERI_CAP		0x2000
 
+#define HPET_MIN_CYCLES			128
+#define HPET_MIN_PROG_DELTA		(HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
+
 #define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
 
 /*
@@ -299,8 +302,9 @@ static void hpet_legacy_clockevent_register(void)
 	/* Calculate the min / max delta */
 	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 							   &hpet_clockevent);
-	/* 5 usec minimum reprogramming delta. */
-	hpet_clockevent.min_delta_ns = 5000;
+	/* Setup minimum reprogramming delta. */
+	hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
+							   &hpet_clockevent);
 
 	/*
 	 * Start hpet with the boot cpu mask and make it
@@ -393,22 +397,24 @@ static int hpet_next_event(unsigned long delta,
 	 * the wraparound into account) nor a simple count down event
 	 * mode. Further the write to the comparator register is
 	 * delayed internally up to two HPET clock cycles in certain
-	 * chipsets (ATI, ICH9,10). We worked around that by reading
-	 * back the compare register, but that required another
-	 * workaround for ICH9,10 chips where the first readout after
-	 * write can return the old stale value. We already have a
-	 * minimum delta of 5us enforced, but a NMI or SMI hitting
+	 * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
+	 * longer delays. We worked around that by reading back the
+	 * compare register, but that required another workaround for
+	 * ICH9,10 chips where the first readout after write can
+	 * return the old stale value. We already had a minimum
+	 * programming delta of 5us enforced, but a NMI or SMI hitting
 	 * between the counter readout and the comparator write can
 	 * move us behind that point easily. Now instead of reading
 	 * the compare register back several times, we make the ETIME
 	 * decision based on the following: Return ETIME if the
-	 * counter value after the write is less than 8 HPET cycles
+	 * counter value after the write is less than HPET_MIN_CYCLES
 	 * away from the event or if the counter is already ahead of
-	 * the event.
+	 * the event. The minimum programming delta for the generic
+	 * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
 	 */
 	res = (s32)(cnt - hpet_readl(HPET_COUNTER));
 
-	return res < 8 ? -ETIME : 0;
+	return res < HPET_MIN_CYCLES ? -ETIME : 0;
 }
 
 static void hpet_legacy_set_mode(enum clock_event_mode mode,
diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c
index ff15c9dcc25..02f07634d26 100644
--- a/arch/x86/kernel/hw_breakpoint.c
+++ b/arch/x86/kernel/hw_breakpoint.c
@@ -122,7 +122,7 @@ int arch_install_hw_breakpoint(struct perf_event *bp)
 		return -EBUSY;
 
 	set_debugreg(info->address, i);
-	__get_cpu_var(cpu_debugreg[i]) = info->address;
+	__this_cpu_write(cpu_debugreg[i], info->address);
 
 	dr7 = &__get_cpu_var(cpu_dr7);
 	*dr7 |= encode_dr7(i, info->len, info->type);
@@ -397,12 +397,12 @@ void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
 
 void hw_breakpoint_restore(void)
 {
-	set_debugreg(__get_cpu_var(cpu_debugreg[0]), 0);
-	set_debugreg(__get_cpu_var(cpu_debugreg[1]), 1);
-	set_debugreg(__get_cpu_var(cpu_debugreg[2]), 2);
-	set_debugreg(__get_cpu_var(cpu_debugreg[3]), 3);
+	set_debugreg(__this_cpu_read(cpu_debugreg[0]), 0);
+	set_debugreg(__this_cpu_read(cpu_debugreg[1]), 1);
+	set_debugreg(__this_cpu_read(cpu_debugreg[2]), 2);
+	set_debugreg(__this_cpu_read(cpu_debugreg[3]), 3);
 	set_debugreg(current->thread.debugreg6, 6);
-	set_debugreg(__get_cpu_var(cpu_dr7), 7);
+	set_debugreg(__this_cpu_read(cpu_dr7), 7);
 }
 EXPORT_SYMBOL_GPL(hw_breakpoint_restore);
 
@@ -433,6 +433,10 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args)
 	dr6_p = (unsigned long *)ERR_PTR(args->err);
 	dr6 = *dr6_p;
 
+	/* If it's a single step, TRAP bits are random */
+	if (dr6 & DR_STEP)
+		return NOTIFY_DONE;
+
 	/* Do an early return if no trap bits are set in DR6 */
 	if ((dr6 & DR_TRAP_BITS) == 0)
 		return NOTIFY_DONE;
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 83ec0175f98..3a43caa3beb 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -234,7 +234,7 @@ unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
 	exit_idle();
 	irq_enter();
 
-	irq = __get_cpu_var(vector_irq)[vector];
+	irq = __this_cpu_read(vector_irq[vector]);
 
 	if (!handle_irq(irq, regs)) {
 		ack_APIC_irq();
@@ -350,12 +350,12 @@ void fixup_irqs(void)
 	for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) {
 		unsigned int irr;
 
-		if (__get_cpu_var(vector_irq)[vector] < 0)
+		if (__this_cpu_read(vector_irq[vector]) < 0)
 			continue;
 
 		irr = apic_read(APIC_IRR + (vector / 32 * 0x10));
 		if (irr  & (1 << (vector % 32))) {
-			irq = __get_cpu_var(vector_irq)[vector];
+			irq = __this_cpu_read(vector_irq[vector]);
 
 			data = irq_get_irq_data(irq);
 			raw_spin_lock(&desc->lock);
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 96656f20775..48ff6dcffa0 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -79,7 +79,7 @@ execute_on_irq_stack(int overflow, struct irq_desc *desc, int irq)
 	u32 *isp, arg1, arg2;
 
 	curctx = (union irq_ctx *) current_thread_info();
-	irqctx = __get_cpu_var(hardirq_ctx);
+	irqctx = __this_cpu_read(hardirq_ctx);
 
 	/*
 	 * this is where we switch to the IRQ stack. However, if we are
@@ -166,7 +166,7 @@ asmlinkage void do_softirq(void)
 
 	if (local_softirq_pending()) {
 		curctx = current_thread_info();
-		irqctx = __get_cpu_var(softirq_ctx);
+		irqctx = __this_cpu_read(softirq_ctx);
 		irqctx->tinfo.task = curctx->task;
 		irqctx->tinfo.previous_esp = current_stack_pointer;
 
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index ec592caac4b..cd21b654dec 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -315,14 +315,18 @@ static void kgdb_remove_all_hw_break(void)
 		if (!breakinfo[i].enabled)
 			continue;
 		bp = *per_cpu_ptr(breakinfo[i].pev, cpu);
-		if (bp->attr.disabled == 1)
+		if (!bp->attr.disabled) {
+			arch_uninstall_hw_breakpoint(bp);
+			bp->attr.disabled = 1;
 			continue;
+		}
 		if (dbg_is_early)
 			early_dr7 &= ~encode_dr7(i, breakinfo[i].len,
 						 breakinfo[i].type);
-		else
-			arch_uninstall_hw_breakpoint(bp);
-		bp->attr.disabled = 1;
+		else if (hw_break_release_slot(i))
+			printk(KERN_ERR "KGDB: hw bpt remove failed %lx\n",
+			       breakinfo[i].addr);
+		breakinfo[i].enabled = 0;
 	}
 }
 
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 1cbd54c0df9..d91c477b3f6 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -403,7 +403,7 @@ static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
 
 static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
 	kcb->kprobe_status = kcb->prev_kprobe.status;
 	kcb->kprobe_old_flags = kcb->prev_kprobe.old_flags;
 	kcb->kprobe_saved_flags = kcb->prev_kprobe.saved_flags;
@@ -412,7 +412,7 @@ static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 				struct kprobe_ctlblk *kcb)
 {
-	__get_cpu_var(current_kprobe) = p;
+	__this_cpu_write(current_kprobe, p);
 	kcb->kprobe_saved_flags = kcb->kprobe_old_flags
 		= (regs->flags & (X86_EFLAGS_TF | X86_EFLAGS_IF));
 	if (is_IF_modifier(p->ainsn.insn))
@@ -586,7 +586,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		preempt_enable_no_resched();
 		return 1;
 	} else if (kprobe_running()) {
-		p = __get_cpu_var(current_kprobe);
+		p = __this_cpu_read(current_kprobe);
 		if (p->break_handler && p->break_handler(p, regs)) {
 			setup_singlestep(p, regs, kcb, 0);
 			return 1;
@@ -759,11 +759,11 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 
 		orig_ret_address = (unsigned long)ri->ret_addr;
 		if (ri->rp && ri->rp->handler) {
-			__get_cpu_var(current_kprobe) = &ri->rp->kp;
+			__this_cpu_write(current_kprobe, &ri->rp->kp);
 			get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
 			ri->ret_addr = correct_ret_addr;
 			ri->rp->handler(ri, regs);
-			__get_cpu_var(current_kprobe) = NULL;
+			__this_cpu_write(current_kprobe, NULL);
 		}
 
 		recycle_rp_inst(ri, &empty_rp);
@@ -1184,6 +1184,10 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op,
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
 
+	/* This is possible if op is under delayed unoptimizing */
+	if (kprobe_disabled(&op->kp))
+		return;
+
 	preempt_disable();
 	if (kprobe_running()) {
 		kprobes_inc_nmissed_count(&op->kp);
@@ -1198,10 +1202,10 @@ static void __kprobes optimized_callback(struct optimized_kprobe *op,
 		regs->ip = (unsigned long)op->kp.addr + INT3_SIZE;
 		regs->orig_ax = ~0UL;
 
-		__get_cpu_var(current_kprobe) = &op->kp;
+		__this_cpu_write(current_kprobe, &op->kp);
 		kcb->kprobe_status = KPROBE_HIT_ACTIVE;
 		opt_pre_handler(&op->kp, regs);
-		__get_cpu_var(current_kprobe) = NULL;
+		__this_cpu_write(current_kprobe, NULL);
 	}
 	preempt_enable_no_resched();
 }
@@ -1401,10 +1405,16 @@ int __kprobes arch_prepare_optimized_kprobe(struct optimized_kprobe *op)
 	return 0;
 }
 
-/* Replace a breakpoint (int3) with a relative jump.  */
-int __kprobes arch_optimize_kprobe(struct optimized_kprobe *op)
+#define MAX_OPTIMIZE_PROBES 256
+static struct text_poke_param *jump_poke_params;
+static struct jump_poke_buffer {
+	u8 buf[RELATIVEJUMP_SIZE];
+} *jump_poke_bufs;
+
+static void __kprobes setup_optimize_kprobe(struct text_poke_param *tprm,
+					    u8 *insn_buf,
+					    struct optimized_kprobe *op)
 {
-	unsigned char jmp_code[RELATIVEJUMP_SIZE];
 	s32 rel = (s32)((long)op->optinsn.insn -
 			((long)op->kp.addr + RELATIVEJUMP_SIZE));
 
@@ -1412,16 +1422,79 @@ int __kprobes arch_optimize_kprobe(struct optimized_kprobe *op)
 	memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_SIZE,
 	       RELATIVE_ADDR_SIZE);
 
-	jmp_code[0] = RELATIVEJUMP_OPCODE;
-	*(s32 *)(&jmp_code[1]) = rel;
+	insn_buf[0] = RELATIVEJUMP_OPCODE;
+	*(s32 *)(&insn_buf[1]) = rel;
+
+	tprm->addr = op->kp.addr;
+	tprm->opcode = insn_buf;
+	tprm->len = RELATIVEJUMP_SIZE;
+}
+
+/*
+ * Replace breakpoints (int3) with relative jumps.
+ * Caller must call with locking kprobe_mutex and text_mutex.
+ */
+void __kprobes arch_optimize_kprobes(struct list_head *oplist)
+{
+	struct optimized_kprobe *op, *tmp;
+	int c = 0;
+
+	list_for_each_entry_safe(op, tmp, oplist, list) {
+		WARN_ON(kprobe_disabled(&op->kp));
+		/* Setup param */
+		setup_optimize_kprobe(&jump_poke_params[c],
+				      jump_poke_bufs[c].buf, op);
+		list_del_init(&op->list);
+		if (++c >= MAX_OPTIMIZE_PROBES)
+			break;
+	}
 
 	/*
 	 * text_poke_smp doesn't support NMI/MCE code modifying.
 	 * However, since kprobes itself also doesn't support NMI/MCE
 	 * code probing, it's not a problem.
 	 */
-	text_poke_smp(op->kp.addr, jmp_code, RELATIVEJUMP_SIZE);
-	return 0;
+	text_poke_smp_batch(jump_poke_params, c);
+}
+
+static void __kprobes setup_unoptimize_kprobe(struct text_poke_param *tprm,
+					      u8 *insn_buf,
+					      struct optimized_kprobe *op)
+{
+	/* Set int3 to first byte for kprobes */
+	insn_buf[0] = BREAKPOINT_INSTRUCTION;
+	memcpy(insn_buf + 1, op->optinsn.copied_insn, RELATIVE_ADDR_SIZE);
+
+	tprm->addr = op->kp.addr;
+	tprm->opcode = insn_buf;
+	tprm->len = RELATIVEJUMP_SIZE;
+}
+
+/*
+ * Recover original instructions and breakpoints from relative jumps.
+ * Caller must call with locking kprobe_mutex.
+ */
+extern void arch_unoptimize_kprobes(struct list_head *oplist,
+				    struct list_head *done_list)
+{
+	struct optimized_kprobe *op, *tmp;
+	int c = 0;
+
+	list_for_each_entry_safe(op, tmp, oplist, list) {
+		/* Setup param */
+		setup_unoptimize_kprobe(&jump_poke_params[c],
+					jump_poke_bufs[c].buf, op);
+		list_move(&op->list, done_list);
+		if (++c >= MAX_OPTIMIZE_PROBES)
+			break;
+	}
+
+	/*
+	 * text_poke_smp doesn't support NMI/MCE code modifying.
+	 * However, since kprobes itself also doesn't support NMI/MCE
+	 * code probing, it's not a problem.
+	 */
+	text_poke_smp_batch(jump_poke_params, c);
 }
 
 /* Replace a relative jump with a breakpoint (int3).  */
@@ -1453,11 +1526,35 @@ static int  __kprobes setup_detour_execution(struct kprobe *p,
 	}
 	return 0;
 }
+
+static int __kprobes init_poke_params(void)
+{
+	/* Allocate code buffer and parameter array */
+	jump_poke_bufs = kmalloc(sizeof(struct jump_poke_buffer) *
+				 MAX_OPTIMIZE_PROBES, GFP_KERNEL);
+	if (!jump_poke_bufs)
+		return -ENOMEM;
+
+	jump_poke_params = kmalloc(sizeof(struct text_poke_param) *
+				   MAX_OPTIMIZE_PROBES, GFP_KERNEL);
+	if (!jump_poke_params) {
+		kfree(jump_poke_bufs);
+		jump_poke_bufs = NULL;
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+#else	/* !CONFIG_OPTPROBES */
+static int __kprobes init_poke_params(void)
+{
+	return 0;
+}
 #endif
 
 int __init arch_init_kprobes(void)
 {
-	return 0;
+	return init_poke_params();
 }
 
 int __kprobes arch_trampoline_kprobe(struct kprobe *p)
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index e1af7c055c7..0fe6d1a66c3 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -155,12 +155,6 @@ static int apply_microcode_amd(int cpu)
 	return 0;
 }
 
-static int get_ucode_data(void *to, const u8 *from, size_t n)
-{
-	memcpy(to, from, n);
-	return 0;
-}
-
 static void *
 get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size)
 {
@@ -168,8 +162,7 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size)
 	u8 section_hdr[UCODE_CONTAINER_SECTION_HDR];
 	void *mc;
 
-	if (get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR))
-		return NULL;
+	get_ucode_data(section_hdr, buf, UCODE_CONTAINER_SECTION_HDR);
 
 	if (section_hdr[0] != UCODE_UCODE_TYPE) {
 		pr_err("error: invalid type field in container file section header\n");
@@ -183,16 +176,13 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size)
 		return NULL;
 	}
 
-	mc = vmalloc(UCODE_MAX_SIZE);
-	if (mc) {
-		memset(mc, 0, UCODE_MAX_SIZE);
-		if (get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR,
-				   total_size)) {
-			vfree(mc);
-			mc = NULL;
-		} else
-			*mc_size = total_size + UCODE_CONTAINER_SECTION_HDR;
-	}
+	mc = vzalloc(UCODE_MAX_SIZE);
+	if (!mc)
+		return NULL;
+
+	get_ucode_data(mc, buf + UCODE_CONTAINER_SECTION_HDR, total_size);
+	*mc_size = total_size + UCODE_CONTAINER_SECTION_HDR;
+
 	return mc;
 }
 
@@ -202,8 +192,7 @@ static int install_equiv_cpu_table(const u8 *buf)
 	unsigned int *buf_pos = (unsigned int *)container_hdr;
 	unsigned long size;
 
-	if (get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE))
-		return 0;
+	get_ucode_data(&container_hdr, buf, UCODE_CONTAINER_HEADER_SIZE);
 
 	size = buf_pos[2];
 
@@ -212,17 +201,14 @@ static int install_equiv_cpu_table(const u8 *buf)
 		return 0;
 	}
 
-	equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
+	equiv_cpu_table = vmalloc(size);
 	if (!equiv_cpu_table) {
 		pr_err("failed to allocate equivalent CPU table\n");
 		return 0;
 	}
 
 	buf += UCODE_CONTAINER_HEADER_SIZE;
-	if (get_ucode_data(equiv_cpu_table, buf, size)) {
-		vfree(equiv_cpu_table);
-		return 0;
-	}
+	get_ucode_data(equiv_cpu_table, buf, size);
 
 	return size + UCODE_CONTAINER_HEADER_SIZE; /* add header length */
 }
diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c
index dcb65cc0a05..1a1b606d3e9 100644
--- a/arch/x86/kernel/microcode_intel.c
+++ b/arch/x86/kernel/microcode_intel.c
@@ -364,8 +364,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 
 		/* For performance reasons, reuse mc area when possible */
 		if (!mc || mc_size > curr_mc_size) {
-			if (mc)
-				vfree(mc);
+			vfree(mc);
 			mc = vmalloc(mc_size);
 			if (!mc)
 				break;
@@ -374,13 +373,11 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 
 		if (get_ucode_data(mc, ucode_ptr, mc_size) ||
 		    microcode_sanity_check(mc) < 0) {
-			vfree(mc);
 			break;
 		}
 
 		if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
-			if (new_mc)
-				vfree(new_mc);
+			vfree(new_mc);
 			new_rev = mc_header.rev;
 			new_mc  = mc;
 			mc = NULL;	/* trigger new vmalloc */
@@ -390,12 +387,10 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 		leftover  -= mc_size;
 	}
 
-	if (mc)
-		vfree(mc);
+	vfree(mc);
 
 	if (leftover) {
-		if (new_mc)
-			vfree(new_mc);
+		vfree(new_mc);
 		state = UCODE_ERROR;
 		goto out;
 	}
@@ -405,8 +400,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
 		goto out;
 	}
 
-	if (uci->mc)
-		vfree(uci->mc);
+	vfree(uci->mc);
 	uci->mc = (struct microcode_intel *)new_mc;
 
 	pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c
index 71825806cd4..ac861b8348e 100644
--- a/arch/x86/kernel/mmconf-fam10h_64.c
+++ b/arch/x86/kernel/mmconf-fam10h_64.c
@@ -25,7 +25,6 @@ struct pci_hostbridge_probe {
 };
 
 static u64 __cpuinitdata fam10h_pci_mmconf_base;
-static int __cpuinitdata fam10h_pci_mmconf_base_status;
 
 static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = {
 	{ 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 },
@@ -44,10 +43,12 @@ static int __cpuinit cmp_range(const void *x1, const void *x2)
 	return start1 - start2;
 }
 
-/*[47:0] */
-/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */
+#define MMCONF_UNIT (1ULL << FAM10H_MMIO_CONF_BASE_SHIFT)
+#define MMCONF_MASK (~(MMCONF_UNIT - 1))
+#define MMCONF_SIZE (MMCONF_UNIT << 8)
+/* need to avoid (0xfd<<32), (0xfe<<32), and (0xff<<32), ht used space */
 #define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32)
-#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32)))
+#define BASE_VALID(b) ((b) + MMCONF_SIZE <= (0xfdULL<<32) || (b) >= (1ULL<<40))
 static void __cpuinit get_fam10h_pci_mmconf_base(void)
 {
 	int i;
@@ -64,12 +65,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 	struct range range[8];
 
 	/* only try to get setting from BSP */
-	/* -1 or 1 */
-	if (fam10h_pci_mmconf_base_status)
+	if (fam10h_pci_mmconf_base)
 		return;
 
 	if (!early_pci_allowed())
-		goto fail;
+		return;
 
 	found = 0;
 	for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
@@ -91,7 +91,7 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 	}
 
 	if (!found)
-		goto fail;
+		return;
 
 	/* SYS_CFG */
 	address = MSR_K8_SYSCFG;
@@ -99,16 +99,16 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 
 	/* TOP_MEM2 is not enabled? */
 	if (!(val & (1<<21))) {
-		tom2 = 0;
+		tom2 = 1ULL << 32;
 	} else {
 		/* TOP_MEM2 */
 		address = MSR_K8_TOP_MEM2;
 		rdmsrl(address, val);
-		tom2 = val & (0xffffULL<<32);
+		tom2 = max(val & 0xffffff800000ULL, 1ULL << 32);
 	}
 
 	if (base <= tom2)
-		base = tom2 + (1ULL<<32);
+		base = (tom2 + 2 * MMCONF_UNIT - 1) & MMCONF_MASK;
 
 	/*
 	 * need to check if the range is in the high mmio range that is
@@ -123,11 +123,11 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 		if (!(reg & 3))
 			continue;
 
-		start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+		start = (u64)(reg & 0xffffff00) << 8; /* 39:16 on 31:8*/
 		reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3));
-		end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/
+		end = ((u64)(reg & 0xffffff00) << 8) | 0xffff; /* 39:16 on 31:8*/
 
-		if (!end)
+		if (end < tom2)
 			continue;
 
 		range[hi_mmio_num].start = start;
@@ -143,32 +143,27 @@ static void __cpuinit get_fam10h_pci_mmconf_base(void)
 
 	if (range[hi_mmio_num - 1].end < base)
 		goto out;
-	if (range[0].start > base)
+	if (range[0].start > base + MMCONF_SIZE)
 		goto out;
 
 	/* need to find one window */
-	base = range[0].start - (1ULL << 32);
+	base = (range[0].start & MMCONF_MASK) - MMCONF_UNIT;
 	if ((base > tom2) && BASE_VALID(base))
 		goto out;
-	base = range[hi_mmio_num - 1].end + (1ULL << 32);
-	if ((base > tom2) && BASE_VALID(base))
+	base = (range[hi_mmio_num - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+	if (BASE_VALID(base))
 		goto out;
 	/* need to find window between ranges */
-	if (hi_mmio_num > 1)
-	for (i = 0; i < hi_mmio_num - 1; i++) {
-		if (range[i + 1].start > (range[i].end + (1ULL << 32))) {
-			base = range[i].end + (1ULL << 32);
-			if ((base > tom2) && BASE_VALID(base))
-				goto out;
-		}
+	for (i = 1; i < hi_mmio_num; i++) {
+		base = (range[i - 1].end + MMCONF_UNIT) & MMCONF_MASK;
+		val = range[i].start & MMCONF_MASK;
+		if (val >= base + MMCONF_SIZE && BASE_VALID(base))
+			goto out;
 	}
-
-fail:
-	fam10h_pci_mmconf_base_status = -1;
 	return;
+
 out:
 	fam10h_pci_mmconf_base = base;
-	fam10h_pci_mmconf_base_status = 1;
 }
 
 void __cpuinit fam10h_check_enable_mmcfg(void)
@@ -190,11 +185,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
 
 		/* only trust the one handle 256 buses, if acpi=off */
 		if (!acpi_pci_disabled || busnbits >= 8) {
-			u64 base;
-			base = val & (0xffffULL << 32);
-			if (fam10h_pci_mmconf_base_status <= 0) {
+			u64 base = val & MMCONF_MASK;
+
+			if (!fam10h_pci_mmconf_base) {
 				fam10h_pci_mmconf_base = base;
-				fam10h_pci_mmconf_base_status = 1;
 				return;
 			} else if (fam10h_pci_mmconf_base ==  base)
 				return;
@@ -206,8 +200,10 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
 	 * with 256 buses
 	 */
 	get_fam10h_pci_mmconf_base();
-	if (fam10h_pci_mmconf_base_status <= 0)
+	if (!fam10h_pci_mmconf_base) {
+		pci_probe &= ~PCI_CHECK_ENABLE_AMD_MMCONF;
 		return;
+	}
 
 	printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n");
 	val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) |
@@ -217,13 +213,13 @@ void __cpuinit fam10h_check_enable_mmcfg(void)
 	wrmsrl(address, val);
 }
 
-static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d)
+static int __init set_check_enable_amd_mmconf(const struct dmi_system_id *d)
 {
         pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
         return 0;
 }
 
-static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
+static const struct dmi_system_id __initconst mmconf_dmi_table[] = {
         {
                 .callback = set_check_enable_amd_mmconf,
                 .ident = "Sun Microsystems Machine",
@@ -234,7 +230,8 @@ static const struct dmi_system_id __cpuinitconst mmconf_dmi_table[] = {
 	{}
 };
 
-void __cpuinit check_enable_amd_mmconf_dmi(void)
+/* Called from a __cpuinit function, but only on the BSP. */
+void __ref check_enable_amd_mmconf_dmi(void)
 {
 	dmi_check_system(mmconf_dmi_table);
 }
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 9af64d9c4b6..01b0f6d0645 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -118,21 +118,8 @@ static void __init MP_bus_info(struct mpc_bus *m)
 
 static void __init MP_ioapic_info(struct mpc_ioapic *m)
 {
-	if (!(m->flags & MPC_APIC_USABLE))
-		return;
-
-	printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
-	       m->apicid, m->apicver, m->apicaddr);
-
-	mp_register_ioapic(m->apicid, m->apicaddr, gsi_top);
-}
-
-static void print_MP_intsrc_info(struct mpc_intsrc *m)
-{
-	apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x,"
-		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
-		m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus,
-		m->srcbusirq, m->dstapic, m->dstirq);
+	if (m->flags & MPC_APIC_USABLE)
+		mp_register_ioapic(m->apicid, m->apicaddr, gsi_top);
 }
 
 static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
@@ -144,73 +131,11 @@ static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
 		mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq);
 }
 
-static void __init assign_to_mp_irq(struct mpc_intsrc *m,
-				    struct mpc_intsrc *mp_irq)
-{
-	mp_irq->dstapic = m->dstapic;
-	mp_irq->type = m->type;
-	mp_irq->irqtype = m->irqtype;
-	mp_irq->irqflag = m->irqflag;
-	mp_irq->srcbus = m->srcbus;
-	mp_irq->srcbusirq = m->srcbusirq;
-	mp_irq->dstirq = m->dstirq;
-}
-
-static void __init assign_to_mpc_intsrc(struct mpc_intsrc *mp_irq,
-					struct mpc_intsrc *m)
-{
-	m->dstapic = mp_irq->dstapic;
-	m->type = mp_irq->type;
-	m->irqtype = mp_irq->irqtype;
-	m->irqflag = mp_irq->irqflag;
-	m->srcbus = mp_irq->srcbus;
-	m->srcbusirq = mp_irq->srcbusirq;
-	m->dstirq = mp_irq->dstirq;
-}
-
-static int __init mp_irq_mpc_intsrc_cmp(struct mpc_intsrc *mp_irq,
-					struct mpc_intsrc *m)
-{
-	if (mp_irq->dstapic != m->dstapic)
-		return 1;
-	if (mp_irq->type != m->type)
-		return 2;
-	if (mp_irq->irqtype != m->irqtype)
-		return 3;
-	if (mp_irq->irqflag != m->irqflag)
-		return 4;
-	if (mp_irq->srcbus != m->srcbus)
-		return 5;
-	if (mp_irq->srcbusirq != m->srcbusirq)
-		return 6;
-	if (mp_irq->dstirq != m->dstirq)
-		return 7;
-
-	return 0;
-}
-
-static void __init MP_intsrc_info(struct mpc_intsrc *m)
-{
-	int i;
-
-	print_MP_intsrc_info(m);
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		if (!mp_irq_mpc_intsrc_cmp(&mp_irqs[i], m))
-			return;
-	}
-
-	assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
-	if (++mp_irq_entries == MAX_IRQ_SOURCES)
-		panic("Max # of irq sources exceeded!!\n");
-}
 #else /* CONFIG_X86_IO_APIC */
 static inline void __init MP_bus_info(struct mpc_bus *m) {}
 static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {}
-static inline void __init MP_intsrc_info(struct mpc_intsrc *m) {}
 #endif /* CONFIG_X86_IO_APIC */
 
-
 static void __init MP_lintsrc_info(struct mpc_lintsrc *m)
 {
 	apic_printk(APIC_VERBOSE, "Lint: type %d, pol %d, trig %d, bus %02x,"
@@ -222,7 +147,6 @@ static void __init MP_lintsrc_info(struct mpc_lintsrc *m)
 /*
  * Read/parse the MPC
  */
-
 static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str)
 {
 
@@ -275,18 +199,6 @@ static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt)
 
 void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { }
 
-static void __init smp_register_lapic_address(unsigned long address)
-{
-	mp_lapic_addr = address;
-
-	set_fixmap_nocache(FIX_APIC_BASE, address);
-	if (boot_cpu_physical_apicid == -1U) {
-		boot_cpu_physical_apicid  = read_apic_id();
-		apic_version[boot_cpu_physical_apicid] =
-			 GET_APIC_VERSION(apic_read(APIC_LVR));
-	}
-}
-
 static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 {
 	char str[16];
@@ -301,17 +213,13 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 #ifdef CONFIG_X86_32
 	generic_mps_oem_check(mpc, oem, str);
 #endif
-	/* save the local APIC address, it might be non-default */
+	/* Initialize the lapic mapping */
 	if (!acpi_lapic)
-		mp_lapic_addr = mpc->lapic;
+		register_lapic_address(mpc->lapic);
 
 	if (early)
 		return 1;
 
-	/* Initialize the lapic mapping */
-	if (!acpi_lapic)
-		smp_register_lapic_address(mpc->lapic);
-
 	if (mpc->oemptr)
 		x86_init.mpparse.smp_read_mpc_oem(mpc);
 
@@ -337,7 +245,7 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 			skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
 			break;
 		case MP_INTSRC:
-			MP_intsrc_info((struct mpc_intsrc *)mpt);
+			mp_save_irq((struct mpc_intsrc *)mpt);
 			skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
 			break;
 		case MP_LINTSRC:
@@ -429,13 +337,13 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 
 		intsrc.srcbusirq = i;
 		intsrc.dstirq = i ? i : 2;	/* IRQ0 to INTIN2 */
-		MP_intsrc_info(&intsrc);
+		mp_save_irq(&intsrc);
 	}
 
 	intsrc.irqtype = mp_ExtINT;
 	intsrc.srcbusirq = 0;
 	intsrc.dstirq = 0;	/* 8259A to INTIN0 */
-	MP_intsrc_info(&intsrc);
+	mp_save_irq(&intsrc);
 }
 
 
@@ -784,11 +692,11 @@ static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
 	int i;
 
 	apic_printk(APIC_VERBOSE, "OLD ");
-	print_MP_intsrc_info(m);
+	print_mp_irq_info(m);
 
 	i = get_MP_intsrc_index(m);
 	if (i > 0) {
-		assign_to_mpc_intsrc(&mp_irqs[i], m);
+		memcpy(m, &mp_irqs[i], sizeof(*m));
 		apic_printk(APIC_VERBOSE, "NEW ");
 		print_mp_irq_info(&mp_irqs[i]);
 		return;
@@ -875,14 +783,14 @@ static int  __init replace_intsrc_all(struct mpc_table *mpc,
 		if (nr_m_spare > 0) {
 			apic_printk(APIC_VERBOSE, "*NEW* found\n");
 			nr_m_spare--;
-			assign_to_mpc_intsrc(&mp_irqs[i], m_spare[nr_m_spare]);
+			memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i]));
 			m_spare[nr_m_spare] = NULL;
 		} else {
 			struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
 			count += sizeof(struct mpc_intsrc);
 			if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
 				goto out;
-			assign_to_mpc_intsrc(&mp_irqs[i], m);
+			memcpy(m, &mp_irqs[i], sizeof(*m));
 			mpc->length = count;
 			mpt += sizeof(struct mpc_intsrc);
 		}
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 7bf2dc4c8f7..12fcbe2c143 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -30,7 +30,6 @@
 #include <linux/init.h>
 #include <linux/poll.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/device.h>
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index ba0f0ca9f28..c01ffa5b9b8 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -143,7 +143,7 @@ static void flush_gart(void)
 
 	spin_lock_irqsave(&iommu_bitmap_lock, flags);
 	if (need_flush) {
-		k8_flush_garts();
+		amd_flush_garts();
 		need_flush = false;
 	}
 	spin_unlock_irqrestore(&iommu_bitmap_lock, flags);
@@ -561,17 +561,17 @@ static void enable_gart_translations(void)
 {
 	int i;
 
-	if (!k8_northbridges.gart_supported)
+	if (!amd_nb_has_feature(AMD_NB_GART))
 		return;
 
-	for (i = 0; i < k8_northbridges.num; i++) {
-		struct pci_dev *dev = k8_northbridges.nb_misc[i];
+	for (i = 0; i < amd_nb_num(); i++) {
+		struct pci_dev *dev = node_to_amd_nb(i)->misc;
 
 		enable_gart_translation(dev, __pa(agp_gatt_table));
 	}
 
 	/* Flush the GART-TLB to remove stale entries */
-	k8_flush_garts();
+	amd_flush_garts();
 }
 
 /*
@@ -596,13 +596,13 @@ static void gart_fixup_northbridges(struct sys_device *dev)
 	if (!fix_up_north_bridges)
 		return;
 
-	if (!k8_northbridges.gart_supported)
+	if (!amd_nb_has_feature(AMD_NB_GART))
 		return;
 
 	pr_info("PCI-DMA: Restoring GART aperture settings\n");
 
-	for (i = 0; i < k8_northbridges.num; i++) {
-		struct pci_dev *dev = k8_northbridges.nb_misc[i];
+	for (i = 0; i < amd_nb_num(); i++) {
+		struct pci_dev *dev = node_to_amd_nb(i)->misc;
 
 		/*
 		 * Don't enable translations just yet.  That is the next
@@ -644,7 +644,7 @@ static struct sys_device device_gart = {
  * Private Northbridge GATT initialization in case we cannot use the
  * AGP driver for some reason.
  */
-static __init int init_k8_gatt(struct agp_kern_info *info)
+static __init int init_amd_gatt(struct agp_kern_info *info)
 {
 	unsigned aper_size, gatt_size, new_aper_size;
 	unsigned aper_base, new_aper_base;
@@ -656,8 +656,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 	aper_size = aper_base = info->aper_size = 0;
 	dev = NULL;
-	for (i = 0; i < k8_northbridges.num; i++) {
-		dev = k8_northbridges.nb_misc[i];
+	for (i = 0; i < amd_nb_num(); i++) {
+		dev = node_to_amd_nb(i)->misc;
 		new_aper_base = read_aperture(dev, &new_aper_size);
 		if (!new_aper_base)
 			goto nommu;
@@ -725,13 +725,13 @@ static void gart_iommu_shutdown(void)
 	if (!no_agp)
 		return;
 
-	if (!k8_northbridges.gart_supported)
+	if (!amd_nb_has_feature(AMD_NB_GART))
 		return;
 
-	for (i = 0; i < k8_northbridges.num; i++) {
+	for (i = 0; i < amd_nb_num(); i++) {
 		u32 ctl;
 
-		dev = k8_northbridges.nb_misc[i];
+		dev = node_to_amd_nb(i)->misc;
 		pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
 
 		ctl &= ~GARTEN;
@@ -749,14 +749,14 @@ int __init gart_iommu_init(void)
 	unsigned long scratch;
 	long i;
 
-	if (!k8_northbridges.gart_supported)
+	if (!amd_nb_has_feature(AMD_NB_GART))
 		return 0;
 
 #ifndef CONFIG_AGP_AMD64
 	no_agp = 1;
 #else
 	/* Makefile puts PCI initialization via subsys_initcall first. */
-	/* Add other K8 AGP bridge drivers here */
+	/* Add other AMD AGP bridge drivers here */
 	no_agp = no_agp ||
 		(agp_amd64_init() < 0) ||
 		(agp_copy_info(agp_bridge, &info) < 0);
@@ -765,7 +765,7 @@ int __init gart_iommu_init(void)
 	if (no_iommu ||
 	    (!force_iommu && max_pfn <= MAX_DMA32_PFN) ||
 	    !gart_iommu_aperture ||
-	    (no_agp && init_k8_gatt(&info) < 0)) {
+	    (no_agp && init_amd_gatt(&info) < 0)) {
 		if (max_pfn > MAX_DMA32_PFN) {
 			pr_warning("More than 4GB of memory but GART IOMMU not available.\n");
 			pr_warning("falling back to iommu=soft.\n");
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 57d1868a86a..09c08a1c706 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -91,8 +91,7 @@ void exit_thread(void)
 void show_regs(struct pt_regs *regs)
 {
 	show_registers(regs);
-	show_trace(NULL, regs, (unsigned long *)kernel_stack_pointer(regs),
-		   regs->bp);
+	show_trace(NULL, regs, (unsigned long *)kernel_stack_pointer(regs));
 }
 
 void show_regs_common(void)
@@ -374,6 +373,7 @@ void default_idle(void)
 {
 	if (hlt_use_halt()) {
 		trace_power_start(POWER_CSTATE, 1, smp_processor_id());
+		trace_cpu_idle(1, smp_processor_id());
 		current_thread_info()->status &= ~TS_POLLING;
 		/*
 		 * TS_POLLING-cleared state must be visible before we
@@ -444,8 +444,9 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait);
 void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
 {
 	trace_power_start(POWER_CSTATE, (ax>>4)+1, smp_processor_id());
+	trace_cpu_idle((ax>>4)+1, smp_processor_id());
 	if (!need_resched()) {
-		if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
+		if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR))
 			clflush((void *)&current_thread_info()->flags);
 
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
@@ -460,7 +461,8 @@ static void mwait_idle(void)
 {
 	if (!need_resched()) {
 		trace_power_start(POWER_CSTATE, 1, smp_processor_id());
-		if (cpu_has(&current_cpu_data, X86_FEATURE_CLFLUSH_MONITOR))
+		trace_cpu_idle(1, smp_processor_id());
+		if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLUSH_MONITOR))
 			clflush((void *)&current_thread_info()->flags);
 
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
@@ -481,10 +483,12 @@ static void mwait_idle(void)
 static void poll_idle(void)
 {
 	trace_power_start(POWER_CSTATE, 0, smp_processor_id());
+	trace_cpu_idle(0, smp_processor_id());
 	local_irq_enable();
 	while (!need_resched())
 		cpu_relax();
-	trace_power_end(0);
+	trace_power_end(smp_processor_id());
+	trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
 }
 
 /*
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 96586c3cbbb..4b9befa0e34 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -113,8 +113,8 @@ void cpu_idle(void)
 			stop_critical_timings();
 			pm_idle();
 			start_critical_timings();
-
 			trace_power_end(smp_processor_id());
+			trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
 		}
 		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index b3d7a3a04f3..4c818a73839 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -142,6 +142,8 @@ void cpu_idle(void)
 			start_critical_timings();
 
 			trace_power_end(smp_processor_id());
+			trace_cpu_idle(PWR_EVENT_EXIT,
+				       smp_processor_id());
 
 			/* In many cases the interrupt that ended idle
 			   has already called exit_idle. But some idle
diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c
index bab3b9e6f66..42eb3300dfc 100644
--- a/arch/x86/kernel/pvclock.c
+++ b/arch/x86/kernel/pvclock.c
@@ -41,44 +41,6 @@ void pvclock_set_flags(u8 flags)
 	valid_flags = flags;
 }
 
-/*
- * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
- * yielding a 64-bit result.
- */
-static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
-{
-	u64 product;
-#ifdef __i386__
-	u32 tmp1, tmp2;
-#endif
-
-	if (shift < 0)
-		delta >>= -shift;
-	else
-		delta <<= shift;
-
-#ifdef __i386__
-	__asm__ (
-		"mul  %5       ; "
-		"mov  %4,%%eax ; "
-		"mov  %%edx,%4 ; "
-		"mul  %5       ; "
-		"xor  %5,%5    ; "
-		"add  %4,%%eax ; "
-		"adc  %5,%%edx ; "
-		: "=A" (product), "=r" (tmp1), "=r" (tmp2)
-		: "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#elif defined(__x86_64__)
-	__asm__ (
-		"mul %%rdx ; shrd $32,%%rdx,%%rax"
-		: "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-#else
-#error implement me!
-#endif
-
-	return product;
-}
-
 static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow)
 {
 	u64 delta = native_read_tsc() - shadow->tsc_timestamp;
@@ -121,6 +83,11 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src)
 
 static atomic64_t last_value = ATOMIC64_INIT(0);
 
+void pvclock_resume(void)
+{
+	atomic64_set(&last_value, 0);
+}
+
 cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
 {
 	struct pvclock_shadow_time shadow;
diff --git a/arch/x86/kernel/reboot_fixups_32.c b/arch/x86/kernel/reboot_fixups_32.c
index fda313ebbb0..c8e41e90f59 100644
--- a/arch/x86/kernel/reboot_fixups_32.c
+++ b/arch/x86/kernel/reboot_fixups_32.c
@@ -43,17 +43,33 @@ static void rdc321x_reset(struct pci_dev *dev)
 	outb(1, 0x92);
 }
 
+static void ce4100_reset(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < 10; i++) {
+		outb(0x2, 0xcf9);
+		udelay(50);
+	}
+}
+
 struct device_fixup {
 	unsigned int vendor;
 	unsigned int device;
 	void (*reboot_fixup)(struct pci_dev *);
 };
 
+/*
+ * PCI ids solely used for fixups_table go here
+ */
+#define PCI_DEVICE_ID_INTEL_CE4100	0x0708
+
 static const struct device_fixup fixups_table[] = {
 { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
 { PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
 { PCI_VENDOR_ID_RDC, PCI_DEVICE_ID_RDC_R6030, rdc321x_reset },
+{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100, ce4100_reset },
 };
 
 /*
diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
new file mode 100644
index 00000000000..2a26819bb6a
--- /dev/null
+++ b/arch/x86/kernel/resource.c
@@ -0,0 +1,48 @@
+#include <linux/ioport.h>
+#include <asm/e820.h>
+
+static void resource_clip(struct resource *res, resource_size_t start,
+			  resource_size_t end)
+{
+	resource_size_t low = 0, high = 0;
+
+	if (res->end < start || res->start > end)
+		return;		/* no conflict */
+
+	if (res->start < start)
+		low = start - res->start;
+
+	if (res->end > end)
+		high = res->end - end;
+
+	/* Keep the area above or below the conflict, whichever is larger */
+	if (low > high)
+		res->end = start - 1;
+	else
+		res->start = end + 1;
+}
+
+static void remove_e820_regions(struct resource *avail)
+{
+	int i;
+	struct e820entry *entry;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		entry = &e820.map[i];
+
+		resource_clip(avail, entry->addr,
+			      entry->addr + entry->size - 1);
+	}
+}
+
+void arch_remove_reservations(struct resource *avail)
+{
+	/* Trim out BIOS areas (low 1MB and high 2MB) and E820 regions */
+	if (avail->flags & IORESOURCE_MEM) {
+		if (avail->start < BIOS_END)
+			avail->start = BIOS_END;
+		resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
+
+		remove_e820_regions(avail);
+	}
+}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 21c6746338a..d3cfe26c025 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -501,7 +501,18 @@ static inline unsigned long long get_total_mem(void)
 	return total << PAGE_SHIFT;
 }
 
-#define DEFAULT_BZIMAGE_ADDR_MAX 0x37FFFFFF
+/*
+ * Keep the crash kernel below this limit.  On 32 bits earlier kernels
+ * would limit the kernel to the low 512 MiB due to mapping restrictions.
+ * On 64 bits, kexec-tools currently limits us to 896 MiB; increase this
+ * limit once kexec-tools are fixed.
+ */
+#ifdef CONFIG_X86_32
+# define CRASH_KERNEL_ADDR_MAX	(512 << 20)
+#else
+# define CRASH_KERNEL_ADDR_MAX	(896 << 20)
+#endif
+
 static void __init reserve_crashkernel(void)
 {
 	unsigned long long total_mem;
@@ -520,10 +531,10 @@ static void __init reserve_crashkernel(void)
 		const unsigned long long alignment = 16<<20;	/* 16M */
 
 		/*
-		 *  kexec want bzImage is below DEFAULT_BZIMAGE_ADDR_MAX
+		 *  kexec want bzImage is below CRASH_KERNEL_ADDR_MAX
 		 */
 		crash_base = memblock_find_in_range(alignment,
-			       DEFAULT_BZIMAGE_ADDR_MAX, crash_size, alignment);
+			       CRASH_KERNEL_ADDR_MAX, crash_size, alignment);
 
 		if (crash_base == MEMBLOCK_ERROR) {
 			pr_info("crashkernel reservation failed - No suitable area found.\n");
@@ -694,7 +705,7 @@ static u64 __init get_max_mapped(void)
 void __init setup_arch(char **cmdline_p)
 {
 	int acpi = 0;
-	int k8 = 0;
+	int amd = 0;
 	unsigned long flags;
 
 #ifdef CONFIG_X86_32
@@ -769,7 +780,6 @@ void __init setup_arch(char **cmdline_p)
 
 	x86_init.oem.arch_setup();
 
-	resource_alloc_from_bottom = 0;
 	iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
 	setup_memory_map();
 	parse_setup_data();
@@ -981,12 +991,12 @@ void __init setup_arch(char **cmdline_p)
 	acpi = acpi_numa_init();
 #endif
 
-#ifdef CONFIG_K8_NUMA
+#ifdef CONFIG_AMD_NUMA
 	if (!acpi)
-		k8 = !k8_numa_init(0, max_pfn);
+		amd = !amd_numa_init(0, max_pfn);
 #endif
 
-	initmem_init(0, max_pfn, acpi, k8);
+	initmem_init(0, max_pfn, acpi, amd);
 	memblock_find_dma_reserve();
 	dma32_reserve_bootmem();
 
@@ -1035,10 +1045,7 @@ void __init setup_arch(char **cmdline_p)
 #endif
 
 	init_apic_mappings();
-	ioapic_init_mappings();
-
-	/* need to wait for io_apic is mapped */
-	probe_nr_irqs_gsi();
+	ioapic_and_gsi_init();
 
 	kvm_guest_init();
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 083e99d1b7d..c7149c96d07 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -281,6 +281,13 @@ static void __cpuinit smp_callin(void)
 	 */
 	smp_store_cpu_info(cpuid);
 
+	/*
+	 * This must be done before setting cpu_online_mask
+	 * or calling notify_cpu_starting.
+	 */
+	set_cpu_sibling_map(raw_smp_processor_id());
+	wmb();
+
 	notify_cpu_starting(cpuid);
 
 	/*
@@ -316,16 +323,6 @@ notrace static void __cpuinit start_secondary(void *unused)
 	 */
 	check_tsc_sync_target();
 
-	if (nmi_watchdog == NMI_IO_APIC) {
-		legacy_pic->mask(0);
-		enable_NMI_through_LVT0();
-		legacy_pic->unmask(0);
-	}
-
-	/* This must be done before setting cpu_online_mask */
-	set_cpu_sibling_map(raw_smp_processor_id());
-	wmb();
-
 	/*
 	 * We need to hold call_lock, so there is no inconsistency
 	 * between the time smp_call_function() determines number of
@@ -430,7 +427,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 
 	cpumask_set_cpu(cpu, c->llc_shared_map);
 
-	if (current_cpu_data.x86_max_cores == 1) {
+	if (__this_cpu_read(cpu_info.x86_max_cores) == 1) {
 		cpumask_copy(cpu_core_mask(cpu), cpu_sibling_mask(cpu));
 		c->booted_cores = 1;
 		return;
@@ -1061,8 +1058,6 @@ static int __init smp_sanity_check(unsigned max_cpus)
 		printk(KERN_INFO "SMP mode deactivated.\n");
 		smpboot_clear_io_apic();
 
-		localise_nmi_watchdog();
-
 		connect_bsp_APIC();
 		setup_local_APIC();
 		end_local_APIC_setup();
@@ -1094,7 +1089,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 
 	preempt_disable();
 	smp_cpu_index_default();
-	current_cpu_data = boot_cpu_data;
+	memcpy(__this_cpu_ptr(&cpu_info), &boot_cpu_data, sizeof(cpu_info));
 	cpumask_copy(cpu_callin_mask, cpumask_of(0));
 	mb();
 	/*
@@ -1166,6 +1161,20 @@ out:
 	preempt_enable();
 }
 
+void arch_disable_nonboot_cpus_begin(void)
+{
+	/*
+	 * Avoid the smp alternatives switch during the disable_nonboot_cpus().
+	 * In the suspend path, we will be back in the SMP mode shortly anyways.
+	 */
+	skip_smp_alternatives = true;
+}
+
+void arch_disable_nonboot_cpus_end(void)
+{
+	skip_smp_alternatives = false;
+}
+
 void arch_enable_nonboot_cpus_begin(void)
 {
 	set_mtrr_aps_delayed_init();
@@ -1196,7 +1205,6 @@ void __init native_smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_X86_IO_APIC
 	setup_ioapic_dest();
 #endif
-	check_nmi_watchdog();
 	mtrr_aps_init();
 }
 
@@ -1341,8 +1349,6 @@ int native_cpu_disable(void)
 	if (cpu == 0)
 		return -EBUSY;
 
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		stop_apic_nmi_watchdog(NULL);
 	clear_local_APIC();
 
 	cpu_disable_common();
@@ -1377,7 +1383,7 @@ void play_dead_common(void)
 
 	mb();
 	/* Ack it */
-	__get_cpu_var(cpu_state) = CPU_DEAD;
+	__this_cpu_write(cpu_state, CPU_DEAD);
 
 	/*
 	 * With physical CPU hotplug, we should halt the cpu
@@ -1397,11 +1403,11 @@ static inline void mwait_play_dead(void)
 	int i;
 	void *mwait_ptr;
 
-	if (!cpu_has(&current_cpu_data, X86_FEATURE_MWAIT))
+	if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_MWAIT))
 		return;
-	if (!cpu_has(&current_cpu_data, X86_FEATURE_CLFLSH))
+	if (!cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_CLFLSH))
 		return;
-	if (current_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
+	if (__this_cpu_read(cpu_info.cpuid_level) < CPUID_MWAIT_LEAF)
 		return;
 
 	eax = CPUID_MWAIT_LEAF;
@@ -1452,7 +1458,7 @@ static inline void mwait_play_dead(void)
 
 static inline void hlt_play_dead(void)
 {
-	if (current_cpu_data.x86 >= 4)
+	if (__this_cpu_read(cpu_info.x86) >= 4)
 		wbinvd();
 
 	while (1) {
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index b53c525368a..938c8e10a19 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -73,22 +73,22 @@ static const struct stacktrace_ops save_stack_ops_nosched = {
  */
 void save_stack_trace(struct stack_trace *trace)
 {
-	dump_trace(current, NULL, NULL, 0, &save_stack_ops, trace);
+	dump_trace(current, NULL, NULL, &save_stack_ops, trace);
 	if (trace->nr_entries < trace->max_entries)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 EXPORT_SYMBOL_GPL(save_stack_trace);
 
-void save_stack_trace_bp(struct stack_trace *trace, unsigned long bp)
+void save_stack_trace_regs(struct stack_trace *trace, struct pt_regs *regs)
 {
-	dump_trace(current, NULL, NULL, bp, &save_stack_ops, trace);
+	dump_trace(current, regs, NULL, &save_stack_ops, trace);
 	if (trace->nr_entries < trace->max_entries)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
-	dump_trace(tsk, NULL, NULL, 0, &save_stack_ops_nosched, trace);
+	dump_trace(tsk, NULL, NULL, &save_stack_ops_nosched, trace);
 	if (trace->nr_entries < trace->max_entries)
 		trace->entries[trace->nr_entries++] = ULONG_MAX;
 }
diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c
index fb5cc5e14cf..25a28a24593 100644
--- a/arch/x86/kernel/time.c
+++ b/arch/x86/kernel/time.c
@@ -22,10 +22,6 @@
 #include <asm/hpet.h>
 #include <asm/time.h>
 
-#if defined(CONFIG_X86_32) && defined(CONFIG_X86_IO_APIC)
-int timer_ack;
-#endif
-
 #ifdef CONFIG_X86_64
 volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES;
 #endif
@@ -63,20 +59,6 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 	/* Keep nmi watchdog up to date */
 	inc_irq_stat(irq0_irqs);
 
-	/* Optimized out for !IO_APIC and x86_64 */
-	if (timer_ack) {
-		/*
-		 * Subtle, when I/O APICs are used we have to ack timer IRQ
-		 * manually to deassert NMI lines for the watchdog if run
-		 * on an 82489DX-based system.
-		 */
-		raw_spin_lock(&i8259A_lock);
-		outb(0x0c, PIC_MASTER_OCW3);
-		/* Ack the IRQ; AEOI will end it automatically. */
-		inb(PIC_MASTER_POLL);
-		raw_spin_unlock(&i8259A_lock);
-	}
-
 	global_clock_event->event_handler(global_clock_event);
 
 	/* MCA bus quirk: Acknowledge irq0 by setting bit 7 in port 0x61 */
diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
index 3af2dff58b2..075d130efcf 100644
--- a/arch/x86/kernel/trampoline_64.S
+++ b/arch/x86/kernel/trampoline_64.S
@@ -127,7 +127,7 @@ startup_64:
 no_longmode:
 	hlt
 	jmp no_longmode
-#include "verify_cpu_64.S"
+#include "verify_cpu.S"
 
 	# Careful these need to be in the same 64K segment as the above;
 tidt:
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index cb838ca42c9..c76aaca5694 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -83,6 +83,8 @@ EXPORT_SYMBOL_GPL(used_vectors);
 
 static int ignore_nmis;
 
+int unknown_nmi_panic;
+
 static inline void conditional_sti(struct pt_regs *regs)
 {
 	if (regs->flags & X86_EFLAGS_IF)
@@ -300,6 +302,13 @@ gp_in_kernel:
 	die("general protection fault", regs, error_code);
 }
 
+static int __init setup_unknown_nmi_panic(char *str)
+{
+	unknown_nmi_panic = 1;
+	return 1;
+}
+__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
+
 static notrace __kprobes void
 mem_parity_error(unsigned char reason, struct pt_regs *regs)
 {
@@ -342,9 +351,11 @@ io_check_error(unsigned char reason, struct pt_regs *regs)
 	reason = (reason & 0xf) | 8;
 	outb(reason, 0x61);
 
-	i = 2000;
-	while (--i)
-		udelay(1000);
+	i = 20000;
+	while (--i) {
+		touch_nmi_watchdog();
+		udelay(100);
+	}
 
 	reason &= ~8;
 	outb(reason, 0x61);
@@ -371,7 +382,7 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
 			reason, smp_processor_id());
 
 	printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
-	if (panic_on_unrecovered_nmi)
+	if (unknown_nmi_panic || panic_on_unrecovered_nmi)
 		panic("NMI: Not continuing");
 
 	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
@@ -397,20 +408,8 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 		if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT)
 							== NOTIFY_STOP)
 			return;
-
-#ifndef CONFIG_LOCKUP_DETECTOR
-		/*
-		 * Ok, so this is none of the documented NMI sources,
-		 * so it must be the NMI watchdog.
-		 */
-		if (nmi_watchdog_tick(regs, reason))
-			return;
-		if (!do_nmi_callback(regs, cpu))
-#endif /* !CONFIG_LOCKUP_DETECTOR */
-			unknown_nmi_error(reason, regs);
-#else
-		unknown_nmi_error(reason, regs);
 #endif
+		unknown_nmi_error(reason, regs);
 
 		return;
 	}
@@ -446,14 +445,12 @@ do_nmi(struct pt_regs *regs, long error_code)
 
 void stop_nmi(void)
 {
-	acpi_nmi_disable();
 	ignore_nmis++;
 }
 
 void restart_nmi(void)
 {
 	ignore_nmis--;
-	acpi_nmi_enable();
 }
 
 /* May run on IST stack. */
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 0c40d8b7241..03d2ea82f35 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -659,7 +659,7 @@ void restore_sched_clock_state(void)
 
 	local_irq_save(flags);
 
-	__get_cpu_var(cyc2ns_offset) = 0;
+	__this_cpu_write(cyc2ns_offset, 0);
 	offset = cyc2ns_suspend - sched_clock();
 
 	for_each_possible_cpu(cpu)
@@ -872,6 +872,9 @@ __cpuinit int unsynchronized_tsc(void)
 
 	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
 		return 0;
+
+	if (tsc_clocksource_reliable)
+		return 0;
 	/*
 	 * Intel systems are normally all synchronized.
 	 * Exceptions must mark TSC as unstable:
@@ -879,14 +882,92 @@ __cpuinit int unsynchronized_tsc(void)
 	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
 		/* assume multi socket systems are not synchronized: */
 		if (num_possible_cpus() > 1)
-			tsc_unstable = 1;
+			return 1;
 	}
 
-	return tsc_unstable;
+	return 0;
+}
+
+
+static void tsc_refine_calibration_work(struct work_struct *work);
+static DECLARE_DELAYED_WORK(tsc_irqwork, tsc_refine_calibration_work);
+/**
+ * tsc_refine_calibration_work - Further refine tsc freq calibration
+ * @work - ignored.
+ *
+ * This functions uses delayed work over a period of a
+ * second to further refine the TSC freq value. Since this is
+ * timer based, instead of loop based, we don't block the boot
+ * process while this longer calibration is done.
+ *
+ * If there are any calibration anomolies (too many SMIs, etc),
+ * or the refined calibration is off by 1% of the fast early
+ * calibration, we throw out the new calibration and use the
+ * early calibration.
+ */
+static void tsc_refine_calibration_work(struct work_struct *work)
+{
+	static u64 tsc_start = -1, ref_start;
+	static int hpet;
+	u64 tsc_stop, ref_stop, delta;
+	unsigned long freq;
+
+	/* Don't bother refining TSC on unstable systems */
+	if (check_tsc_unstable())
+		goto out;
+
+	/*
+	 * Since the work is started early in boot, we may be
+	 * delayed the first time we expire. So set the workqueue
+	 * again once we know timers are working.
+	 */
+	if (tsc_start == -1) {
+		/*
+		 * Only set hpet once, to avoid mixing hardware
+		 * if the hpet becomes enabled later.
+		 */
+		hpet = is_hpet_enabled();
+		schedule_delayed_work(&tsc_irqwork, HZ);
+		tsc_start = tsc_read_refs(&ref_start, hpet);
+		return;
+	}
+
+	tsc_stop = tsc_read_refs(&ref_stop, hpet);
+
+	/* hpet or pmtimer available ? */
+	if (!hpet && !ref_start && !ref_stop)
+		goto out;
+
+	/* Check, whether the sampling was disturbed by an SMI */
+	if (tsc_start == ULLONG_MAX || tsc_stop == ULLONG_MAX)
+		goto out;
+
+	delta = tsc_stop - tsc_start;
+	delta *= 1000000LL;
+	if (hpet)
+		freq = calc_hpet_ref(delta, ref_start, ref_stop);
+	else
+		freq = calc_pmtimer_ref(delta, ref_start, ref_stop);
+
+	/* Make sure we're within 1% */
+	if (abs(tsc_khz - freq) > tsc_khz/100)
+		goto out;
+
+	tsc_khz = freq;
+	printk(KERN_INFO "Refined TSC clocksource calibration: "
+		"%lu.%03lu MHz.\n", (unsigned long)tsc_khz / 1000,
+					(unsigned long)tsc_khz % 1000);
+
+out:
+	clocksource_register_khz(&clocksource_tsc, tsc_khz);
 }
 
-static void __init init_tsc_clocksource(void)
+
+static int __init init_tsc_clocksource(void)
 {
+	if (!cpu_has_tsc || tsc_disabled > 0)
+		return 0;
+
 	if (tsc_clocksource_reliable)
 		clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
 	/* lower the rating if we already know its unstable: */
@@ -894,8 +975,14 @@ static void __init init_tsc_clocksource(void)
 		clocksource_tsc.rating = 0;
 		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
 	}
-	clocksource_register_khz(&clocksource_tsc, tsc_khz);
+	schedule_delayed_work(&tsc_irqwork, 0);
+	return 0;
 }
+/*
+ * We use device_initcall here, to ensure we run after the hpet
+ * is fully initialized, which may occur at fs_initcall time.
+ */
+device_initcall(init_tsc_clocksource);
 
 void __init tsc_init(void)
 {
@@ -949,6 +1036,5 @@ void __init tsc_init(void)
 		mark_tsc_unstable("TSCs unsynchronized");
 
 	check_system_tsc_reliable();
-	init_tsc_clocksource();
 }
 
diff --git a/arch/x86/kernel/verify_cpu_64.S b/arch/x86/kernel/verify_cpu.S
index 56a8c2a867d..0edefc19a11 100644
--- a/arch/x86/kernel/verify_cpu_64.S
+++ b/arch/x86/kernel/verify_cpu.S
@@ -7,6 +7,7 @@
  *	Copyright (c) 2007  Andi Kleen (ak@suse.de)
  *	Copyright (c) 2007  Eric Biederman (ebiederm@xmission.com)
  *	Copyright (c) 2007  Vivek Goyal (vgoyal@in.ibm.com)
+ *	Copyright (c) 2010  Kees Cook (kees.cook@canonical.com)
  *
  * 	This source code is licensed under the GNU General Public License,
  * 	Version 2.  See the file COPYING for more details.
@@ -14,18 +15,17 @@
  *	This is a common code for verification whether CPU supports
  * 	long mode and SSE or not. It is not called directly instead this
  *	file is included at various places and compiled in that context.
- * 	Following are the current usage.
+ *	This file is expected to run in 32bit code.  Currently:
  *
- * 	This file is included by both 16bit and 32bit code.
+ *	arch/x86/boot/compressed/head_64.S: Boot cpu verification
+ *	arch/x86/kernel/trampoline_64.S: secondary processor verfication
+ *	arch/x86/kernel/head_32.S: processor startup
  *
- *	arch/x86_64/boot/setup.S : Boot cpu verification (16bit)
- *	arch/x86_64/boot/compressed/head.S: Boot cpu verification (32bit)
- *	arch/x86_64/kernel/trampoline.S: secondary processor verfication (16bit)
- *	arch/x86_64/kernel/acpi/wakeup.S:Verfication at resume (16bit)
- *
- *	verify_cpu, returns the status of cpu check in register %eax.
+ *	verify_cpu, returns the status of longmode and SSE in register %eax.
  *		0: Success    1: Failure
  *
+ *	On Intel, the XD_DISABLE flag will be cleared as a side-effect.
+ *
  * 	The caller needs to check for the error code and take the action
  * 	appropriately. Either display a message or halt.
  */
@@ -62,8 +62,41 @@ verify_cpu:
 	cmpl	$0x444d4163,%ecx
 	jnz	verify_cpu_noamd
 	mov	$1,%di			# cpu is from AMD
+	jmp	verify_cpu_check
 
 verify_cpu_noamd:
+	cmpl	$0x756e6547,%ebx        # GenuineIntel?
+	jnz	verify_cpu_check
+	cmpl	$0x49656e69,%edx
+	jnz	verify_cpu_check
+	cmpl	$0x6c65746e,%ecx
+	jnz	verify_cpu_check
+
+	# only call IA32_MISC_ENABLE when:
+	# family > 6 || (family == 6 && model >= 0xd)
+	movl	$0x1, %eax		# check CPU family and model
+	cpuid
+	movl	%eax, %ecx
+
+	andl	$0x0ff00f00, %eax	# mask family and extended family
+	shrl	$8, %eax
+	cmpl	$6, %eax
+	ja	verify_cpu_clear_xd	# family > 6, ok
+	jb	verify_cpu_check	# family < 6, skip
+
+	andl	$0x000f00f0, %ecx	# mask model and extended model
+	shrl	$4, %ecx
+	cmpl	$0xd, %ecx
+	jb	verify_cpu_check	# family == 6, model < 0xd, skip
+
+verify_cpu_clear_xd:
+	movl	$MSR_IA32_MISC_ENABLE, %ecx
+	rdmsr
+	btrl	$2, %edx		# clear MSR_IA32_MISC_ENABLE_XD_DISABLE
+	jnc	verify_cpu_check	# only write MSR if bit was changed
+	wrmsr
+
+verify_cpu_check:
 	movl    $0x1,%eax		# Does the cpu have what it takes
 	cpuid
 	andl	$REQUIRED_MASK0,%edx
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index e03530aebfd..bf470075518 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -69,7 +69,7 @@ jiffies_64 = jiffies;
 
 PHDRS {
 	text PT_LOAD FLAGS(5);          /* R_E */
-	data PT_LOAD FLAGS(7);          /* RWE */
+	data PT_LOAD FLAGS(6);          /* RW_ */
 #ifdef CONFIG_X86_64
 	user PT_LOAD FLAGS(5);          /* R_E */
 #ifdef CONFIG_SMP
@@ -116,6 +116,10 @@ SECTIONS
 
 	EXCEPTION_TABLE(16) :text = 0x9090
 
+#if defined(CONFIG_DEBUG_RODATA)
+	/* .text should occupy whole number of pages */
+	. = ALIGN(PAGE_SIZE);
+#endif
 	X64_ALIGN_DEBUG_RODATA_BEGIN
 	RO_DATA(PAGE_SIZE)
 	X64_ALIGN_DEBUG_RODATA_END
@@ -335,7 +339,7 @@ SECTIONS
 		__bss_start = .;
 		*(.bss..page_aligned)
 		*(.bss)
-		. = ALIGN(4);
+		. = ALIGN(PAGE_SIZE);
 		__bss_stop = .;
 	}
 
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index 9c253bd65e2..547128546cc 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -394,7 +394,8 @@ static void __init setup_xstate_init(void)
 	 * Setup init_xstate_buf to represent the init state of
 	 * all the features managed by the xsave
 	 */
-	init_xstate_buf = alloc_bootmem(xstate_size);
+	init_xstate_buf = alloc_bootmem_align(xstate_size,
+					      __alignof__(struct xsave_struct));
 	init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
 
 	clts();
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index f628234fbec..3cece05e4ac 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -575,6 +575,8 @@ struct kvm_pic *kvm_create_pic(struct kvm *kvm)
 	s->pics[1].elcr_mask = 0xde;
 	s->pics[0].pics_state = s;
 	s->pics[1].pics_state = s;
+	s->pics[0].isr_ack = 0xff;
+	s->pics[1].isr_ack = 0xff;
 
 	/*
 	 * Initialize PIO device
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index fb8b376bf28..fbb04aee830 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -2394,7 +2394,8 @@ static int mmu_alloc_direct_roots(struct kvm_vcpu *vcpu)
 			ASSERT(!VALID_PAGE(root));
 			spin_lock(&vcpu->kvm->mmu_lock);
 			kvm_mmu_free_some_pages(vcpu);
-			sp = kvm_mmu_get_page(vcpu, i << 30, i << 30,
+			sp = kvm_mmu_get_page(vcpu, i << (30 - PAGE_SHIFT),
+					      i << 30,
 					      PT32_ROOT_LEVEL, 1, ACC_ALL,
 					      NULL);
 			root = __pa(sp->spt);
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 82e144a4e51..b81a9b7c2ca 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -3395,6 +3395,7 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	vcpu->arch.regs[VCPU_REGS_RIP] = svm->vmcb->save.rip;
 
 	load_host_msrs(vcpu);
+	kvm_load_ldt(ldt_selector);
 	loadsegment(fs, fs_selector);
 #ifdef CONFIG_X86_64
 	load_gs_index(gs_selector);
@@ -3402,7 +3403,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 #else
 	loadsegment(gs, gs_selector);
 #endif
-	kvm_load_ldt(ldt_selector);
 
 	reload_tss(vcpu);
 
@@ -3494,6 +3494,10 @@ static void svm_cpuid_update(struct kvm_vcpu *vcpu)
 static void svm_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
 {
 	switch (func) {
+	case 0x00000001:
+		/* Mask out xsave bit as long as it is not supported by SVM */
+		entry->ecx &= ~(bit(X86_FEATURE_XSAVE));
+		break;
 	case 0x80000001:
 		if (nested)
 			entry->ecx |= (1 << 2); /* Set SVM bit */
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 8da0e45ff7c..81fcbe9515c 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -821,10 +821,9 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 #endif
 
 #ifdef CONFIG_X86_64
-	if (is_long_mode(&vmx->vcpu)) {
-		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+	rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
+	if (is_long_mode(&vmx->vcpu))
 		wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
-	}
 #endif
 	for (i = 0; i < vmx->save_nmsrs; ++i)
 		kvm_set_shared_msr(vmx->guest_msrs[i].index,
@@ -839,23 +838,23 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 
 	++vmx->vcpu.stat.host_state_reload;
 	vmx->host_state.loaded = 0;
-	if (vmx->host_state.fs_reload_needed)
-		loadsegment(fs, vmx->host_state.fs_sel);
+#ifdef CONFIG_X86_64
+	if (is_long_mode(&vmx->vcpu))
+		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
+#endif
 	if (vmx->host_state.gs_ldt_reload_needed) {
 		kvm_load_ldt(vmx->host_state.ldt_sel);
 #ifdef CONFIG_X86_64
 		load_gs_index(vmx->host_state.gs_sel);
-		wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs);
 #else
 		loadsegment(gs, vmx->host_state.gs_sel);
 #endif
 	}
+	if (vmx->host_state.fs_reload_needed)
+		loadsegment(fs, vmx->host_state.fs_sel);
 	reload_tss();
 #ifdef CONFIG_X86_64
-	if (is_long_mode(&vmx->vcpu)) {
-		rdmsrl(MSR_KERNEL_GS_BASE, vmx->msr_guest_kernel_gs_base);
-		wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
-	}
+	wrmsrl(MSR_KERNEL_GS_BASE, vmx->msr_host_kernel_gs_base);
 #endif
 	if (current_thread_info()->status & TS_USEDFPU)
 		clts();
@@ -4228,11 +4227,6 @@ static int vmx_get_lpage_level(void)
 		return PT_PDPE_LEVEL;
 }
 
-static inline u32 bit(int bitno)
-{
-	return 1 << (bitno & 31);
-}
-
 static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpuid_entry2 *best;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index cdac9e592aa..46a368cb651 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -155,11 +155,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 
 u64 __read_mostly host_xcr0;
 
-static inline u32 bit(int bitno)
-{
-	return 1 << (bitno & 31);
-}
-
 static void kvm_on_user_return(struct user_return_notifier *urn)
 {
 	unsigned slot;
@@ -981,7 +976,7 @@ static inline u64 nsec_to_cycles(u64 nsec)
 	if (kvm_tsc_changes_freq())
 		printk_once(KERN_WARNING
 		 "kvm: unreliable cycle conversion on adjustable rate TSC\n");
-	ret = nsec * __get_cpu_var(cpu_tsc_khz);
+	ret = nsec * __this_cpu_read(cpu_tsc_khz);
 	do_div(ret, USEC_PER_SEC);
 	return ret;
 }
@@ -1066,7 +1061,7 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	local_irq_save(flags);
 	kvm_get_msr(v, MSR_IA32_TSC, &tsc_timestamp);
 	kernel_ns = get_kernel_ns();
-	this_tsc_khz = __get_cpu_var(cpu_tsc_khz);
+	this_tsc_khz = __this_cpu_read(cpu_tsc_khz);
 
 	if (unlikely(this_tsc_khz == 0)) {
 		local_irq_restore(flags);
@@ -4432,7 +4427,7 @@ EXPORT_SYMBOL_GPL(kvm_fast_pio_out);
 
 static void tsc_bad(void *info)
 {
-	__get_cpu_var(cpu_tsc_khz) = 0;
+	__this_cpu_write(cpu_tsc_khz, 0);
 }
 
 static void tsc_khz_changed(void *data)
@@ -4446,7 +4441,7 @@ static void tsc_khz_changed(void *data)
 		khz = cpufreq_quick_get(raw_smp_processor_id());
 	if (!khz)
 		khz = tsc_khz;
-	__get_cpu_var(cpu_tsc_khz) = khz;
+	__this_cpu_write(cpu_tsc_khz, khz);
 }
 
 static int kvmclock_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
@@ -4569,9 +4564,11 @@ static void kvm_timer_init(void)
 #ifdef CONFIG_CPU_FREQ
 		struct cpufreq_policy policy;
 		memset(&policy, 0, sizeof(policy));
-		cpufreq_get_policy(&policy, get_cpu());
+		cpu = get_cpu();
+		cpufreq_get_policy(&policy, cpu);
 		if (policy.cpuinfo.max_freq)
 			max_tsc_khz = policy.cpuinfo.max_freq;
+		put_cpu();
 #endif
 		cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
 					  CPUFREQ_TRANSITION_NOTIFIER);
@@ -5522,6 +5519,8 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 
 	mmu_reset_needed |= kvm_read_cr4(vcpu) != sregs->cr4;
 	kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
+	if (sregs->cr4 & X86_CR4_OSXSAVE)
+		update_cpuid(vcpu);
 	if (!is_long_mode(vcpu) && is_pae(vcpu)) {
 		load_pdptrs(vcpu, vcpu->arch.walk_mmu, vcpu->arch.cr3);
 		mmu_reset_needed = 1;
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 2cea414489f..c600da830ce 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -70,6 +70,11 @@ static inline int is_paging(struct kvm_vcpu *vcpu)
 	return kvm_read_cr0_bits(vcpu, X86_CR0_PG);
 }
 
+static inline u32 bit(int bitno)
+{
+	return 1 << (bitno & 31);
+}
+
 void kvm_before_handle_nmi(struct kvm_vcpu *vcpu);
 void kvm_after_handle_nmi(struct kvm_vcpu *vcpu);
 int kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq);
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 73b1e1a1f48..4996cf5f73a 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -531,7 +531,10 @@ static void lguest_write_cr3(unsigned long cr3)
 {
 	lguest_data.pgdir = cr3;
 	lazy_hcall1(LHCALL_NEW_PGTABLE, cr3);
-	cr3_changed = true;
+
+	/* These two page tables are simple, linear, and used during boot */
+	if (cr3 != __pa(swapper_pg_dir) && cr3 != __pa(initial_page_table))
+		cr3_changed = true;
 }
 
 static unsigned long lguest_read_cr3(void)
@@ -703,9 +706,9 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
  * to forget all of them.  Fortunately, this is very rare.
  *
  * ... except in early boot when the kernel sets up the initial pagetables,
- * which makes booting astonishingly slow: 1.83 seconds!  So we don't even tell
- * the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds.
+ * which makes booting astonishingly slow: 48 seconds!  So we don't even tell
+ * the Host anything changed until we've done the first real page table switch,
+ * which brings boot back to 4.3 seconds.
  */
 static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 {
@@ -1002,7 +1005,7 @@ static void lguest_time_init(void)
 	clockevents_register_device(&lguest_clockevent);
 
 	/* Finally, we unblock the timer interrupt. */
-	enable_lguest_irq(0);
+	clear_bit(0, lguest_data.blocked_interrupts);
 }
 
 /*
@@ -1349,9 +1352,6 @@ __init void lguest_init(void)
 	 */
 	switch_to_new_gdt(0);
 
-	/* We actually boot with all memory mapped, but let's say 128MB. */
-	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
-
 	/*
 	 * The Host<->Guest Switcher lives at the top of our address space, and
 	 * the Host told us how big it is when we made LGUEST_INIT hypercall:
diff --git a/arch/x86/lib/delay.c b/arch/x86/lib/delay.c
index ff485d36118..fc45ba887d0 100644
--- a/arch/x86/lib/delay.c
+++ b/arch/x86/lib/delay.c
@@ -121,7 +121,7 @@ inline void __const_udelay(unsigned long xloops)
 	asm("mull %%edx"
 		:"=d" (xloops), "=&a" (d0)
 		:"1" (xloops), "0"
-		(cpu_data(raw_smp_processor_id()).loops_per_jiffy * (HZ/4)));
+		(this_cpu_read(cpu_info.loops_per_jiffy) * (HZ/4)));
 
 	__delay(++xloops);
 }
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 55543397a8a..09df2f9a3d6 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -23,7 +23,7 @@ mmiotrace-y			:= kmmio.o pf_in.o mmio-mod.o
 obj-$(CONFIG_MMIOTRACE_TEST)	+= testmmiotrace.o
 
 obj-$(CONFIG_NUMA)		+= numa.o numa_$(BITS).o
-obj-$(CONFIG_K8_NUMA)		+= k8topology_64.o
+obj-$(CONFIG_AMD_NUMA)		+= amdtopology_64.o
 obj-$(CONFIG_ACPI_NUMA)		+= srat_$(BITS).o
 
 obj-$(CONFIG_HAVE_MEMBLOCK)		+= memblock.o
diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/amdtopology_64.c
index 804a3b6c6e1..08a0069b87a 100644
--- a/arch/x86/mm/k8topology_64.c
+++ b/arch/x86/mm/amdtopology_64.c
@@ -1,8 +1,8 @@
 /*
- * AMD K8 NUMA support.
+ * AMD NUMA support.
  * Discover the memory map and associated nodes.
  *
- * This version reads it directly from the K8 northbridge.
+ * This version reads it directly from the AMD northbridge.
  *
  * Copyright 2002,2003 Andi Kleen, SuSE Labs.
  */
@@ -57,7 +57,7 @@ static __init void early_get_boot_cpu_id(void)
 {
 	/*
 	 * need to get the APIC ID of the BSP so can use that to
-	 * create apicid_to_node in k8_scan_nodes()
+	 * create apicid_to_node in amd_scan_nodes()
 	 */
 #ifdef CONFIG_X86_MPPARSE
 	/*
@@ -66,10 +66,9 @@ static __init void early_get_boot_cpu_id(void)
 	if (smp_found_config)
 		early_get_smp_config();
 #endif
-	early_init_lapic_mapping();
 }
 
-int __init k8_get_nodes(struct bootnode *physnodes)
+int __init amd_get_nodes(struct bootnode *physnodes)
 {
 	int i;
 	int ret = 0;
@@ -82,7 +81,7 @@ int __init k8_get_nodes(struct bootnode *physnodes)
 	return ret;
 }
 
-int __init k8_numa_init(unsigned long start_pfn, unsigned long end_pfn)
+int __init amd_numa_init(unsigned long start_pfn, unsigned long end_pfn)
 {
 	unsigned long start = PFN_PHYS(start_pfn);
 	unsigned long end = PFN_PHYS(end_pfn);
@@ -194,7 +193,7 @@ int __init k8_numa_init(unsigned long start_pfn, unsigned long end_pfn)
 	return 0;
 }
 
-int __init k8_scan_nodes(void)
+int __init amd_scan_nodes(void)
 {
 	unsigned int bits;
 	unsigned int cores;
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index c0e28a13de7..947f42abe82 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -364,8 +364,9 @@ void free_init_pages(char *what, unsigned long begin, unsigned long end)
 	/*
 	 * We just marked the kernel text read only above, now that
 	 * we are going to free part of that, we need to make that
-	 * writeable first.
+	 * writeable and non-executable first.
 	 */
+	set_memory_nx(begin, (end - begin) >> PAGE_SHIFT);
 	set_memory_rw(begin, (end - begin) >> PAGE_SHIFT);
 
 	printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10);
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 0e969f9f401..f89b5bb4e93 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -226,7 +226,7 @@ page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd_base)
 
 static inline int is_kernel_text(unsigned long addr)
 {
-	if (addr >= PAGE_OFFSET && addr <= (unsigned long)__init_end)
+	if (addr >= (unsigned long)_text && addr <= (unsigned long)__init_end)
 		return 1;
 	return 0;
 }
@@ -912,6 +912,23 @@ void set_kernel_text_ro(void)
 	set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
 }
 
+static void mark_nxdata_nx(void)
+{
+	/*
+	 * When this called, init has already been executed and released,
+	 * so everything past _etext sould be NX.
+	 */
+	unsigned long start = PFN_ALIGN(_etext);
+	/*
+	 * This comes from is_kernel_text upper limit. Also HPAGE where used:
+	 */
+	unsigned long size = (((unsigned long)__init_end + HPAGE_SIZE) & HPAGE_MASK) - start;
+
+	if (__supported_pte_mask & _PAGE_NX)
+		printk(KERN_INFO "NX-protecting the kernel data: %luk\n", size >> 10);
+	set_pages_nx(virt_to_page(start), size >> PAGE_SHIFT);
+}
+
 void mark_rodata_ro(void)
 {
 	unsigned long start = PFN_ALIGN(_text);
@@ -946,6 +963,7 @@ void mark_rodata_ro(void)
 	printk(KERN_INFO "Testing CPA: write protecting again\n");
 	set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
 #endif
+	mark_nxdata_nx();
 }
 #endif
 
diff --git a/arch/x86/mm/kmemcheck/error.c b/arch/x86/mm/kmemcheck/error.c
index af3b6c8a436..704a37ceddd 100644
--- a/arch/x86/mm/kmemcheck/error.c
+++ b/arch/x86/mm/kmemcheck/error.c
@@ -185,7 +185,7 @@ void kmemcheck_error_save(enum kmemcheck_shadow state,
 	e->trace.entries = e->trace_entries;
 	e->trace.max_entries = ARRAY_SIZE(e->trace_entries);
 	e->trace.skip = 0;
-	save_stack_trace_bp(&e->trace, regs->bp);
+	save_stack_trace_regs(&e->trace, regs);
 
 	/* Round address down to nearest 16 bytes */
 	shadow_copy = kmemcheck_shadow_lookup(address
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 7ffc9b727ef..7762a517d69 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -264,7 +264,7 @@ static struct bootnode physnodes[MAX_NUMNODES] __initdata;
 static char *cmdline __initdata;
 
 static int __init setup_physnodes(unsigned long start, unsigned long end,
-					int acpi, int k8)
+					int acpi, int amd)
 {
 	int nr_nodes = 0;
 	int ret = 0;
@@ -274,13 +274,13 @@ static int __init setup_physnodes(unsigned long start, unsigned long end,
 	if (acpi)
 		nr_nodes = acpi_get_nodes(physnodes);
 #endif
-#ifdef CONFIG_K8_NUMA
-	if (k8)
-		nr_nodes = k8_get_nodes(physnodes);
+#ifdef CONFIG_AMD_NUMA
+	if (amd)
+		nr_nodes = amd_get_nodes(physnodes);
 #endif
 	/*
 	 * Basic sanity checking on the physical node map: there may be errors
-	 * if the SRAT or K8 incorrectly reported the topology or the mem=
+	 * if the SRAT or AMD code incorrectly reported the topology or the mem=
 	 * kernel parameter is used.
 	 */
 	for (i = 0; i < nr_nodes; i++) {
@@ -549,7 +549,7 @@ static int __init split_nodes_size_interleave(u64 addr, u64 max_addr, u64 size)
  * numa=fake command-line option.
  */
 static int __init numa_emulation(unsigned long start_pfn,
-			unsigned long last_pfn, int acpi, int k8)
+			unsigned long last_pfn, int acpi, int amd)
 {
 	u64 addr = start_pfn << PAGE_SHIFT;
 	u64 max_addr = last_pfn << PAGE_SHIFT;
@@ -557,7 +557,7 @@ static int __init numa_emulation(unsigned long start_pfn,
 	int num_nodes;
 	int i;
 
-	num_phys_nodes = setup_physnodes(addr, max_addr, acpi, k8);
+	num_phys_nodes = setup_physnodes(addr, max_addr, acpi, amd);
 	/*
 	 * If the numa=fake command-line contains a 'M' or 'G', it represents
 	 * the fixed node size.  Otherwise, if it is just a single number N,
@@ -602,7 +602,7 @@ static int __init numa_emulation(unsigned long start_pfn,
 #endif /* CONFIG_NUMA_EMU */
 
 void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn,
-				int acpi, int k8)
+				int acpi, int amd)
 {
 	int i;
 
@@ -610,7 +610,7 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn,
 	nodes_clear(node_online_map);
 
 #ifdef CONFIG_NUMA_EMU
-	if (cmdline && !numa_emulation(start_pfn, last_pfn, acpi, k8))
+	if (cmdline && !numa_emulation(start_pfn, last_pfn, acpi, amd))
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
@@ -624,8 +624,8 @@ void __init initmem_init(unsigned long start_pfn, unsigned long last_pfn,
 	nodes_clear(node_online_map);
 #endif
 
-#ifdef CONFIG_K8_NUMA
-	if (!numa_off && k8 && !k8_scan_nodes())
+#ifdef CONFIG_AMD_NUMA
+	if (!numa_off && amd && !amd_scan_nodes())
 		return;
 	nodes_clear(node_possible_map);
 	nodes_clear(node_online_map);
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 532e7933d60..8b830ca14ac 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -13,6 +13,7 @@
 #include <linux/pfn.h>
 #include <linux/percpu.h>
 #include <linux/gfp.h>
+#include <linux/pci.h>
 
 #include <asm/e820.h>
 #include <asm/processor.h>
@@ -255,13 +256,16 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
 				   unsigned long pfn)
 {
 	pgprot_t forbidden = __pgprot(0);
+	pgprot_t required = __pgprot(0);
 
 	/*
 	 * The BIOS area between 640k and 1Mb needs to be executable for
 	 * PCI BIOS based config access (CONFIG_PCI_GOBIOS) support.
 	 */
-	if (within(pfn, BIOS_BEGIN >> PAGE_SHIFT, BIOS_END >> PAGE_SHIFT))
+#ifdef CONFIG_PCI_BIOS
+	if (pcibios_enabled && within(pfn, BIOS_BEGIN >> PAGE_SHIFT, BIOS_END >> PAGE_SHIFT))
 		pgprot_val(forbidden) |= _PAGE_NX;
+#endif
 
 	/*
 	 * The kernel text needs to be executable for obvious reasons
@@ -278,6 +282,12 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
 	if (within(pfn, __pa((unsigned long)__start_rodata) >> PAGE_SHIFT,
 		   __pa((unsigned long)__end_rodata) >> PAGE_SHIFT))
 		pgprot_val(forbidden) |= _PAGE_RW;
+	/*
+	 * .data and .bss should always be writable.
+	 */
+	if (within(address, (unsigned long)_sdata, (unsigned long)_edata) ||
+	    within(address, (unsigned long)__bss_start, (unsigned long)__bss_stop))
+		pgprot_val(required) |= _PAGE_RW;
 
 #if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
 	/*
@@ -317,6 +327,7 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
 #endif
 
 	prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden));
+	prot = __pgprot(pgprot_val(prot) | pgprot_val(required));
 
 	return prot;
 }
@@ -393,7 +404,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 {
 	unsigned long nextpage_addr, numpages, pmask, psize, flags, addr, pfn;
 	pte_t new_pte, old_pte, *tmp;
-	pgprot_t old_prot, new_prot;
+	pgprot_t old_prot, new_prot, req_prot;
 	int i, do_split = 1;
 	unsigned int level;
 
@@ -438,10 +449,10 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * We are safe now. Check whether the new pgprot is the same:
 	 */
 	old_pte = *kpte;
-	old_prot = new_prot = pte_pgprot(old_pte);
+	old_prot = new_prot = req_prot = pte_pgprot(old_pte);
 
-	pgprot_val(new_prot) &= ~pgprot_val(cpa->mask_clr);
-	pgprot_val(new_prot) |= pgprot_val(cpa->mask_set);
+	pgprot_val(req_prot) &= ~pgprot_val(cpa->mask_clr);
+	pgprot_val(req_prot) |= pgprot_val(cpa->mask_set);
 
 	/*
 	 * old_pte points to the large page base address. So we need
@@ -450,17 +461,17 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	pfn = pte_pfn(old_pte) + ((address & (psize - 1)) >> PAGE_SHIFT);
 	cpa->pfn = pfn;
 
-	new_prot = static_protections(new_prot, address, pfn);
+	new_prot = static_protections(req_prot, address, pfn);
 
 	/*
 	 * We need to check the full range, whether
 	 * static_protection() requires a different pgprot for one of
 	 * the pages in the range we try to preserve:
 	 */
-	addr = address + PAGE_SIZE;
-	pfn++;
-	for (i = 1; i < cpa->numpages; i++, addr += PAGE_SIZE, pfn++) {
-		pgprot_t chk_prot = static_protections(new_prot, addr, pfn);
+	addr = address & pmask;
+	pfn = pte_pfn(old_pte);
+	for (i = 0; i < (psize >> PAGE_SHIFT); i++, addr += PAGE_SIZE, pfn++) {
+		pgprot_t chk_prot = static_protections(req_prot, addr, pfn);
 
 		if (pgprot_val(chk_prot) != pgprot_val(new_prot))
 			goto out_unlock;
@@ -483,7 +494,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * that we limited the number of possible pages already to
 	 * the number of pages in the large page.
 	 */
-	if (address == (nextpage_addr - psize) && cpa->numpages == numpages) {
+	if (address == (address & pmask) && cpa->numpages == (psize >> PAGE_SHIFT)) {
 		/*
 		 * The address is aligned and the number of pages
 		 * covers the full page.
diff --git a/arch/x86/mm/setup_nx.c b/arch/x86/mm/setup_nx.c
index a3250aa3408..410531d3c29 100644
--- a/arch/x86/mm/setup_nx.c
+++ b/arch/x86/mm/setup_nx.c
@@ -41,7 +41,7 @@ void __init x86_report_nx(void)
 {
 	if (!cpu_has_nx) {
 		printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
-		       "missing in CPU or disabled in BIOS!\n");
+		       "missing in CPU!\n");
 	} else {
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 		if (disable_nx) {
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index a17dffd136c..f16434568a5 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -92,6 +92,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity)
 	/* mark this node as "seen" in node bitmap */
 	BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo);
 
+	/* don't need to check apic_id here, because it is always 8 bits */
 	apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
 
 	printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n",
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index a35cb9d8b06..171a0aacb99 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -134,6 +134,10 @@ acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
 	}
 
 	apic_id = pa->apic_id;
+	if (apic_id >= MAX_LOCAL_APIC) {
+		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
+		return;
+	}
 	apicid_to_node[apic_id] = node;
 	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
@@ -168,6 +172,12 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 		apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
 	else
 		apic_id = pa->apic_id;
+
+	if (apic_id >= MAX_LOCAL_APIC) {
+		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
+		return;
+	}
+
 	apicid_to_node[apic_id] = node;
 	node_set(node, cpu_nodes_parsed);
 	acpi_numa = 1;
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 49358481c73..6acc724d5d8 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -223,7 +223,7 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 
 static void __cpuinit calculate_tlb_offset(void)
 {
-	int cpu, node, nr_node_vecs;
+	int cpu, node, nr_node_vecs, idx = 0;
 	/*
 	 * we are changing tlb_vector_offset for each CPU in runtime, but this
 	 * will not cause inconsistency, as the write is atomic under X86. we
@@ -239,7 +239,7 @@ static void __cpuinit calculate_tlb_offset(void)
 		nr_node_vecs = NUM_INVALIDATE_TLB_VECTORS/nr_online_nodes;
 
 	for_each_online_node(node) {
-		int node_offset = (node % NUM_INVALIDATE_TLB_VECTORS) *
+		int node_offset = (idx % NUM_INVALIDATE_TLB_VECTORS) *
 			nr_node_vecs;
 		int cpu_offset = 0;
 		for_each_cpu(cpu, cpumask_of_node(node)) {
@@ -248,10 +248,11 @@ static void __cpuinit calculate_tlb_offset(void)
 			cpu_offset++;
 			cpu_offset = cpu_offset % nr_node_vecs;
 		}
+		idx++;
 	}
 }
 
-static int tlb_cpuhp_notify(struct notifier_block *n,
+static int __cpuinit tlb_cpuhp_notify(struct notifier_block *n,
 		unsigned long action, void *hcpu)
 {
 	switch (action & 0xf) {
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index 2d49d4e19a3..72cbec14d78 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -126,7 +126,7 @@ x86_backtrace(struct pt_regs * const regs, unsigned int depth)
 	if (!user_mode_vm(regs)) {
 		unsigned long stack = kernel_stack_pointer(regs);
 		if (depth)
-			dump_trace(NULL, regs, (unsigned long *)stack, 0,
+			dump_trace(NULL, regs, (unsigned long *)stack,
 				   &backtrace_ops, &depth);
 		return;
 	}
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 4e8baad36d3..f24a8533bcd 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -143,7 +143,7 @@ static inline int has_mux(void)
 
 inline int op_x86_phys_to_virt(int phys)
 {
-	return __get_cpu_var(switch_index) + phys;
+	return __this_cpu_read(switch_index) + phys;
 }
 
 inline int op_x86_virt_to_phys(int virt)
@@ -732,6 +732,9 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 		case 0x14:
 			cpu_type = "x86-64/family14h";
 			break;
+		case 0x15:
+			cpu_type = "x86-64/family15h";
+			break;
 		default:
 			return -ENODEV;
 		}
diff --git a/arch/x86/oprofile/nmi_timer_int.c b/arch/x86/oprofile/nmi_timer_int.c
index e3ecb71b579..0636dd93cef 100644
--- a/arch/x86/oprofile/nmi_timer_int.c
+++ b/arch/x86/oprofile/nmi_timer_int.c
@@ -58,9 +58,6 @@ static void timer_stop(void)
 
 int __init op_nmi_timer_init(struct oprofile_operations *ops)
 {
-	if ((nmi_watchdog != NMI_IO_APIC) || (atomic_read(&nmi_active) <= 0))
-		return -ENODEV;
-
 	ops->start = timer_start;
 	ops->stop = timer_stop;
 	ops->cpu_type = "timer";
diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index a011bcc0f94..c3b8e24f2b1 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -29,11 +29,12 @@
 #include "op_x86_model.h"
 #include "op_counter.h"
 
-#define NUM_COUNTERS 4
+#define NUM_COUNTERS		4
+#define NUM_COUNTERS_F15H	6
 #ifdef CONFIG_OPROFILE_EVENT_MULTIPLEX
-#define NUM_VIRT_COUNTERS 32
+#define NUM_VIRT_COUNTERS	32
 #else
-#define NUM_VIRT_COUNTERS NUM_COUNTERS
+#define NUM_VIRT_COUNTERS	0
 #endif
 
 #define OP_EVENT_MASK			0x0FFF
@@ -41,7 +42,8 @@
 
 #define MSR_AMD_EVENTSEL_RESERVED	((0xFFFFFCF0ULL<<32)|(1ULL<<21))
 
-static unsigned long reset_value[NUM_VIRT_COUNTERS];
+static int num_counters;
+static unsigned long reset_value[OP_MAX_COUNTER];
 
 #define IBS_FETCH_SIZE			6
 #define IBS_OP_SIZE			12
@@ -387,7 +389,7 @@ static void op_mux_switch_ctrl(struct op_x86_model_spec const *model,
 	int i;
 
 	/* enable active counters */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		int virt = op_x86_phys_to_virt(i);
 		if (!reset_value[virt])
 			continue;
@@ -406,7 +408,7 @@ static void op_amd_shutdown(struct op_msrs const * const msrs)
 {
 	int i;
 
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (!msrs->counters[i].addr)
 			continue;
 		release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
@@ -418,7 +420,7 @@ static int op_amd_fill_in_addresses(struct op_msrs * const msrs)
 {
 	int i;
 
-	for (i = 0; i < NUM_COUNTERS; i++) {
+	for (i = 0; i < num_counters; i++) {
 		if (!reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
 			goto fail;
 		if (!reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i)) {
@@ -426,8 +428,13 @@ static int op_amd_fill_in_addresses(struct op_msrs * const msrs)
 			goto fail;
 		}
 		/* both registers must be reserved */
-		msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
-		msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
+		if (num_counters == NUM_COUNTERS_F15H) {
+			msrs->counters[i].addr = MSR_F15H_PERF_CTR + (i << 1);
+			msrs->controls[i].addr = MSR_F15H_PERF_CTL + (i << 1);
+		} else {
+			msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
+			msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
+		}
 		continue;
 	fail:
 		if (!counter_config[i].enabled)
@@ -447,7 +454,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	int i;
 
 	/* setup reset_value */
-	for (i = 0; i < NUM_VIRT_COUNTERS; ++i) {
+	for (i = 0; i < OP_MAX_COUNTER; ++i) {
 		if (counter_config[i].enabled
 		    && msrs->counters[op_x86_virt_to_phys(i)].addr)
 			reset_value[i] = counter_config[i].count;
@@ -456,7 +463,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	}
 
 	/* clear all counters */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (!msrs->controls[i].addr)
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
@@ -472,7 +479,7 @@ static void op_amd_setup_ctrs(struct op_x86_model_spec const *model,
 	}
 
 	/* enable active counters */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		int virt = op_x86_phys_to_virt(i);
 		if (!reset_value[virt])
 			continue;
@@ -503,7 +510,7 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
 	u64 val;
 	int i;
 
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		int virt = op_x86_phys_to_virt(i);
 		if (!reset_value[virt])
 			continue;
@@ -526,7 +533,7 @@ static void op_amd_start(struct op_msrs const * const msrs)
 	u64 val;
 	int i;
 
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
@@ -546,7 +553,7 @@ static void op_amd_stop(struct op_msrs const * const msrs)
 	 * Subtle: stop on all counters to avoid race with setting our
 	 * pm callback
 	 */
-	for (i = 0; i < NUM_COUNTERS; ++i) {
+	for (i = 0; i < num_counters; ++i) {
 		if (!reset_value[op_x86_phys_to_virt(i)])
 			continue;
 		rdmsrl(msrs->controls[i].addr, val);
@@ -603,6 +610,7 @@ static int force_ibs_eilvt_setup(void)
 		ret = setup_ibs_ctl(i);
 		if (ret)
 			return ret;
+		pr_err(FW_BUG "using offset %d for IBS interrupts\n", i);
 		return 0;
 	}
 
@@ -630,21 +638,29 @@ static int __init_ibs_nmi(void)
 	return 0;
 }
 
-/* initialize the APIC for the IBS interrupts if available */
+/*
+ * check and reserve APIC extended interrupt LVT offset for IBS if
+ * available
+ *
+ * init_ibs() preforms implicitly cpu-local operations, so pin this
+ * thread to its current CPU
+ */
+
 static void init_ibs(void)
 {
-	ibs_caps = get_ibs_caps();
+	preempt_disable();
 
+	ibs_caps = get_ibs_caps();
 	if (!ibs_caps)
-		return;
+		goto out;
 
-	if (__init_ibs_nmi()) {
+	if (__init_ibs_nmi() < 0)
 		ibs_caps = 0;
-		return;
-	}
+	else
+		printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps);
 
-	printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n",
-	       (unsigned)ibs_caps);
+out:
+	preempt_enable();
 }
 
 static int (*create_arch_files)(struct super_block *sb, struct dentry *root);
@@ -698,18 +714,29 @@ static int setup_ibs_files(struct super_block *sb, struct dentry *root)
 	return 0;
 }
 
+struct op_x86_model_spec op_amd_spec;
+
 static int op_amd_init(struct oprofile_operations *ops)
 {
 	init_ibs();
 	create_arch_files = ops->create_files;
 	ops->create_files = setup_ibs_files;
+
+	if (boot_cpu_data.x86 == 0x15) {
+		num_counters = NUM_COUNTERS_F15H;
+	} else {
+		num_counters = NUM_COUNTERS;
+	}
+
+	op_amd_spec.num_counters = num_counters;
+	op_amd_spec.num_controls = num_counters;
+	op_amd_spec.num_virt_counters = max(num_counters, NUM_VIRT_COUNTERS);
+
 	return 0;
 }
 
 struct op_x86_model_spec op_amd_spec = {
-	.num_counters		= NUM_COUNTERS,
-	.num_controls		= NUM_COUNTERS,
-	.num_virt_counters	= NUM_VIRT_COUNTERS,
+	/* num_counters/num_controls filled in at runtime */
 	.reserved		= MSR_AMD_EVENTSEL_RESERVED,
 	.event_mask		= OP_EVENT_MASK,
 	.init			= op_amd_init,
diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c
index 182558dd551..9fadec07414 100644
--- a/arch/x86/oprofile/op_model_p4.c
+++ b/arch/x86/oprofile/op_model_p4.c
@@ -11,7 +11,7 @@
 #include <linux/oprofile.h>
 #include <linux/smp.h>
 #include <linux/ptrace.h>
-#include <linux/nmi.h>
+#include <asm/nmi.h>
 #include <asm/msr.h>
 #include <asm/fixmap.h>
 #include <asm/apic.h>
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index d769cda5408..94b745045e4 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -95,8 +95,8 @@ static void ppro_setup_ctrs(struct op_x86_model_spec const *model,
 		 * counter width:
 		 */
 		if (!(eax.split.version_id == 0 &&
-			current_cpu_data.x86 == 6 &&
-				current_cpu_data.x86_model == 15)) {
+			__this_cpu_read(cpu_info.x86) == 6 &&
+				__this_cpu_read(cpu_info.x86_model) == 15)) {
 
 			if (counter_width < eax.split.bit_width)
 				counter_width = eax.split.bit_width;
@@ -235,8 +235,8 @@ static void arch_perfmon_setup_counters(void)
 	eax.full = cpuid_eax(0xa);
 
 	/* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */
-	if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 &&
-		current_cpu_data.x86_model == 15) {
+	if (eax.split.version_id == 0 && __this_cpu_read(cpu_info.x86) == 6 &&
+		__this_cpu_read(cpu_info.x86_model) == 15) {
 		eax.split.version_id = 2;
 		eax.split.num_counters = 2;
 		eax.split.bit_width = 40;
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index effd96e33f1..6b8759f7634 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PCI_OLPC)		+= olpc.o
 obj-$(CONFIG_PCI_XEN)		+= xen.o
 
 obj-y				+= fixup.o
+obj-$(CONFIG_X86_INTEL_CE)      += ce4100.o
 obj-$(CONFIG_ACPI)		+= acpi.o
 obj-y				+= legacy.o irq.o
 
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 15466c096ba..0972315c386 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -138,7 +138,6 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 	struct acpi_resource_address64 addr;
 	acpi_status status;
 	unsigned long flags;
-	struct resource *root, *conflict;
 	u64 start, end;
 
 	status = resource_to_addr(acpi_res, &addr);
@@ -146,12 +145,10 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 		return AE_OK;
 
 	if (addr.resource_type == ACPI_MEMORY_RANGE) {
-		root = &iomem_resource;
 		flags = IORESOURCE_MEM;
 		if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
 			flags |= IORESOURCE_PREFETCH;
 	} else if (addr.resource_type == ACPI_IO_RANGE) {
-		root = &ioport_resource;
 		flags = IORESOURCE_IO;
 	} else
 		return AE_OK;
@@ -172,25 +169,90 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
 		return AE_OK;
 	}
 
-	conflict = insert_resource_conflict(root, res);
-	if (conflict) {
-		dev_err(&info->bridge->dev,
-			"address space collision: host bridge window %pR "
-			"conflicts with %s %pR\n",
-			res, conflict->name, conflict);
-	} else {
-		pci_bus_add_resource(info->bus, res, 0);
-		info->res_num++;
-		if (addr.translation_offset)
-			dev_info(&info->bridge->dev, "host bridge window %pR "
-				 "(PCI address [%#llx-%#llx])\n",
-				 res, res->start - addr.translation_offset,
-				 res->end - addr.translation_offset);
+	info->res_num++;
+	if (addr.translation_offset)
+		dev_info(&info->bridge->dev, "host bridge window %pR "
+			 "(PCI address [%#llx-%#llx])\n",
+			 res, res->start - addr.translation_offset,
+			 res->end - addr.translation_offset);
+	else
+		dev_info(&info->bridge->dev, "host bridge window %pR\n", res);
+
+	return AE_OK;
+}
+
+static bool resource_contains(struct resource *res, resource_size_t point)
+{
+	if (res->start <= point && point <= res->end)
+		return true;
+	return false;
+}
+
+static void coalesce_windows(struct pci_root_info *info, int type)
+{
+	int i, j;
+	struct resource *res1, *res2;
+
+	for (i = 0; i < info->res_num; i++) {
+		res1 = &info->res[i];
+		if (!(res1->flags & type))
+			continue;
+
+		for (j = i + 1; j < info->res_num; j++) {
+			res2 = &info->res[j];
+			if (!(res2->flags & type))
+				continue;
+
+			/*
+			 * I don't like throwing away windows because then
+			 * our resources no longer match the ACPI _CRS, but
+			 * the kernel resource tree doesn't allow overlaps.
+			 */
+			if (resource_contains(res1, res2->start) ||
+			    resource_contains(res1, res2->end) ||
+			    resource_contains(res2, res1->start) ||
+			    resource_contains(res2, res1->end)) {
+				res1->start = min(res1->start, res2->start);
+				res1->end = max(res1->end, res2->end);
+				dev_info(&info->bridge->dev,
+					 "host bridge window expanded to %pR; %pR ignored\n",
+					 res1, res2);
+				res2->flags = 0;
+			}
+		}
+	}
+}
+
+static void add_resources(struct pci_root_info *info)
+{
+	int i;
+	struct resource *res, *root, *conflict;
+
+	if (!pci_use_crs)
+		return;
+
+	coalesce_windows(info, IORESOURCE_MEM);
+	coalesce_windows(info, IORESOURCE_IO);
+
+	for (i = 0; i < info->res_num; i++) {
+		res = &info->res[i];
+
+		if (res->flags & IORESOURCE_MEM)
+			root = &iomem_resource;
+		else if (res->flags & IORESOURCE_IO)
+			root = &ioport_resource;
 		else
-			dev_info(&info->bridge->dev,
-				 "host bridge window %pR\n", res);
+			continue;
+
+		conflict = insert_resource_conflict(root, res);
+		if (conflict)
+			dev_err(&info->bridge->dev,
+				"address space collision: host bridge window %pR "
+				"conflicts with %s %pR\n",
+				res, conflict->name, conflict);
+		else
+			pci_bus_add_resource(info->bus, res, 0);
 	}
-	return AE_OK;
 }
 
 static void
@@ -224,6 +286,7 @@ get_current_resources(struct acpi_device *device, int busnum,
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
 				&info);
 
+	add_resources(&info);
 	return;
 
 name_alloc_fail:
diff --git a/arch/x86/pci/ce4100.c b/arch/x86/pci/ce4100.c
new file mode 100644
index 00000000000..85b68ef5e80
--- /dev/null
+++ b/arch/x86/pci/ce4100.c
@@ -0,0 +1,315 @@
+/*
+ *  GPL LICENSE SUMMARY
+ *
+ *  Copyright(c) 2010 Intel Corporation. All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of version 2 of the GNU General Public License as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *  The full GNU General Public License is included in this distribution
+ *  in the file called LICENSE.GPL.
+ *
+ *  Contact Information:
+ *    Intel Corporation
+ *    2200 Mission College Blvd.
+ *    Santa Clara, CA  97052
+ *
+ * This provides access methods for PCI registers that mis-behave on
+ * the CE4100. Each register can be assigned a private init, read and
+ * write routine. The exception to this is the bridge device.  The
+ * bridge device is the only device on bus zero (0) that requires any
+ * fixup so it is a special case ATM
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/pci_x86.h>
+
+struct sim_reg {
+	u32 value;
+	u32 mask;
+};
+
+struct sim_dev_reg {
+	int dev_func;
+	int reg;
+	void (*init)(struct sim_dev_reg *reg);
+	void (*read)(struct sim_dev_reg *reg, u32 *value);
+	void (*write)(struct sim_dev_reg *reg, u32 value);
+	struct sim_reg sim_reg;
+};
+
+struct sim_reg_op {
+	void (*init)(struct sim_dev_reg *reg);
+	void (*read)(struct sim_dev_reg *reg, u32 value);
+	void (*write)(struct sim_dev_reg *reg, u32 value);
+};
+
+#define MB (1024 * 1024)
+#define KB (1024)
+#define SIZE_TO_MASK(size) (~(size - 1))
+
+#define DEFINE_REG(device, func, offset, size, init_op, read_op, write_op)\
+{ PCI_DEVFN(device, func), offset, init_op, read_op, write_op,\
+	{0, SIZE_TO_MASK(size)} },
+
+static void reg_init(struct sim_dev_reg *reg)
+{
+	pci_direct_conf1.read(0, 1, reg->dev_func, reg->reg, 4,
+			      &reg->sim_reg.value);
+}
+
+static void reg_read(struct sim_dev_reg *reg, u32 *value)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
+	*value = reg->sim_reg.value;
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
+
+static void reg_write(struct sim_dev_reg *reg, u32 value)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
+	reg->sim_reg.value = (value & reg->sim_reg.mask) |
+		(reg->sim_reg.value & ~reg->sim_reg.mask);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
+}
+
+static void sata_reg_init(struct sim_dev_reg *reg)
+{
+	pci_direct_conf1.read(0, 1, PCI_DEVFN(14, 0), 0x10, 4,
+			      &reg->sim_reg.value);
+	reg->sim_reg.value += 0x400;
+}
+
+static void ehci_reg_read(struct sim_dev_reg *reg, u32 *value)
+{
+	reg_read(reg, value);
+	if (*value != reg->sim_reg.mask)
+		*value |= 0x100;
+}
+
+void sata_revid_init(struct sim_dev_reg *reg)
+{
+	reg->sim_reg.value = 0x01060100;
+	reg->sim_reg.mask = 0;
+}
+
+static void sata_revid_read(struct sim_dev_reg *reg, u32 *value)
+{
+	reg_read(reg, value);
+}
+
+static struct sim_dev_reg bus1_fixups[] = {
+	DEFINE_REG(2, 0, 0x10, (16*MB), reg_init, reg_read, reg_write)
+	DEFINE_REG(2, 0, 0x14, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(2, 1, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(3, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(4, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(4, 1, 0x10, (128*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(6, 0, 0x10, (512*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(6, 1, 0x10, (512*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(6, 2, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(8, 0, 0x10, (1*MB), reg_init, reg_read, reg_write)
+	DEFINE_REG(8, 1, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(8, 2, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(9, 0, 0x10 , (1*MB), reg_init, reg_read, reg_write)
+	DEFINE_REG(9, 0, 0x14, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(10, 0, 0x10, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(10, 0, 0x14, (256*MB), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 0, 0x10, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 0, 0x14, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 1, 0x10, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 2, 0x10, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 2, 0x14, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 2, 0x18, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 3, 0x10, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 3, 0x14, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 4, 0x10, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 5, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 6, 0x10, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(11, 7, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(12, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(12, 0, 0x14, (256), reg_init, reg_read, reg_write)
+	DEFINE_REG(12, 1, 0x10, (1024), reg_init, reg_read, reg_write)
+	DEFINE_REG(13, 0, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write)
+	DEFINE_REG(13, 1, 0x10, (32*KB), reg_init, ehci_reg_read, reg_write)
+	DEFINE_REG(14, 0, 0x8,  0, sata_revid_init, sata_revid_read, 0)
+	DEFINE_REG(14, 0, 0x10, 0, reg_init, reg_read, reg_write)
+	DEFINE_REG(14, 0, 0x14, 0, reg_init, reg_read, reg_write)
+	DEFINE_REG(14, 0, 0x18, 0, reg_init, reg_read, reg_write)
+	DEFINE_REG(14, 0, 0x1C, 0, reg_init, reg_read, reg_write)
+	DEFINE_REG(14, 0, 0x20, 0, reg_init, reg_read, reg_write)
+	DEFINE_REG(14, 0, 0x24, (0x200), sata_reg_init, reg_read, reg_write)
+	DEFINE_REG(15, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(15, 0, 0x14, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(16, 0, 0x10, (64*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(16, 0, 0x14, (64*MB), reg_init, reg_read, reg_write)
+	DEFINE_REG(16, 0, 0x18, (64*MB), reg_init, reg_read, reg_write)
+	DEFINE_REG(17, 0, 0x10, (128*KB), reg_init, reg_read, reg_write)
+	DEFINE_REG(18, 0, 0x10, (1*KB), reg_init, reg_read, reg_write)
+};
+
+static void __init init_sim_regs(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
+		if (bus1_fixups[i].init)
+			bus1_fixups[i].init(&bus1_fixups[i]);
+	}
+}
+
+static inline void extract_bytes(u32 *value, int reg, int len)
+{
+	uint32_t mask;
+
+	*value >>= ((reg & 3) * 8);
+	mask = 0xFFFFFFFF >> ((4 - len) * 8);
+	*value &= mask;
+}
+
+int bridge_read(unsigned int devfn, int reg, int len, u32 *value)
+{
+	u32 av_bridge_base, av_bridge_limit;
+	int retval = 0;
+
+	switch (reg) {
+	/* Make BARs appear to not request any memory. */
+	case PCI_BASE_ADDRESS_0:
+	case PCI_BASE_ADDRESS_0 + 1:
+	case PCI_BASE_ADDRESS_0 + 2:
+	case PCI_BASE_ADDRESS_0 + 3:
+		*value = 0;
+		break;
+
+		/* Since subordinate bus number register is hardwired
+		 * to zero and read only, so do the simulation.
+		 */
+	case PCI_PRIMARY_BUS:
+		if (len == 4)
+			*value = 0x00010100;
+		break;
+
+	case PCI_SUBORDINATE_BUS:
+		*value = 1;
+		break;
+
+	case PCI_MEMORY_BASE:
+	case PCI_MEMORY_LIMIT:
+		/* Get the A/V bridge base address. */
+		pci_direct_conf1.read(0, 0, devfn,
+				PCI_BASE_ADDRESS_0, 4, &av_bridge_base);
+
+		av_bridge_limit = av_bridge_base + (512*MB - 1);
+		av_bridge_limit >>= 16;
+		av_bridge_limit &= 0xFFF0;
+
+		av_bridge_base >>= 16;
+		av_bridge_base &= 0xFFF0;
+
+		if (reg == PCI_MEMORY_LIMIT)
+			*value = av_bridge_limit;
+		else if (len == 2)
+			*value = av_bridge_base;
+		else
+			*value = (av_bridge_limit << 16) | av_bridge_base;
+		break;
+		/* Make prefetchable memory limit smaller than prefetchable
+		 * memory base, so not claim prefetchable memory space.
+		 */
+	case PCI_PREF_MEMORY_BASE:
+		*value = 0xFFF0;
+		break;
+	case PCI_PREF_MEMORY_LIMIT:
+		*value = 0x0;
+		break;
+		/* Make IO limit smaller than IO base, so not claim IO space. */
+	case PCI_IO_BASE:
+		*value = 0xF0;
+		break;
+	case PCI_IO_LIMIT:
+		*value = 0;
+		break;
+	default:
+		retval = 1;
+	}
+	return retval;
+}
+
+static int ce4100_conf_read(unsigned int seg, unsigned int bus,
+			    unsigned int devfn, int reg, int len, u32 *value)
+{
+	int i, retval = 1;
+
+	if (bus == 1) {
+		for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
+			if (bus1_fixups[i].dev_func == devfn &&
+			    bus1_fixups[i].reg == (reg & ~3) &&
+			    bus1_fixups[i].read) {
+				bus1_fixups[i].read(&(bus1_fixups[i]),
+						    value);
+				extract_bytes(value, reg, len);
+				return 0;
+			}
+		}
+	}
+
+	if (bus == 0 && (PCI_DEVFN(1, 0) == devfn) &&
+	    !bridge_read(devfn, reg, len, value))
+		return 0;
+
+	return pci_direct_conf1.read(seg, bus, devfn, reg, len, value);
+}
+
+static int ce4100_conf_write(unsigned int seg, unsigned int bus,
+			     unsigned int devfn, int reg, int len, u32 value)
+{
+	int i;
+
+	if (bus == 1) {
+		for (i = 0; i < ARRAY_SIZE(bus1_fixups); i++) {
+			if (bus1_fixups[i].dev_func == devfn &&
+			    bus1_fixups[i].reg == (reg & ~3) &&
+			    bus1_fixups[i].write) {
+				bus1_fixups[i].write(&(bus1_fixups[i]),
+						     value);
+				return 0;
+			}
+		}
+	}
+
+	/* Discard writes to A/V bridge BAR. */
+	if (bus == 0 && PCI_DEVFN(1, 0) == devfn &&
+	    ((reg & ~3) == PCI_BASE_ADDRESS_0))
+		return 0;
+
+	return pci_direct_conf1.write(seg, bus, devfn, reg, len, value);
+}
+
+struct pci_raw_ops ce4100_pci_conf = {
+	.read =	ce4100_conf_read,
+	.write = ce4100_conf_write,
+};
+
+static int __init ce4100_pci_init(void)
+{
+	init_sim_regs();
+	raw_pci_ops = &ce4100_pci_conf;
+	return 0;
+}
+subsys_initcall(ce4100_pci_init);
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index c4bb261c106..b1805b78842 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -65,21 +65,13 @@ pcibios_align_resource(void *data, const struct resource *res,
 			resource_size_t size, resource_size_t align)
 {
 	struct pci_dev *dev = data;
-	resource_size_t start = round_down(res->end - size + 1, align);
+	resource_size_t start = res->start;
 
 	if (res->flags & IORESOURCE_IO) {
-
-		/*
-		 * If we're avoiding ISA aliases, the largest contiguous I/O
-		 * port space is 256 bytes.  Clearing bits 9 and 10 preserves
-		 * all 256-byte and smaller alignments, so the result will
-		 * still be correctly aligned.
-		 */
-		if (!skip_isa_ioresource_align(dev))
-			start &= ~0x300;
-	} else if (res->flags & IORESOURCE_MEM) {
-		if (start < BIOS_END)
-			start = res->end;	/* fail; no space */
+		if (skip_isa_ioresource_align(dev))
+			return start;
+		if (start & 0x300)
+			start = (start + 0x3ff) & ~0x3ff;
 	}
 	return start;
 }
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 2492d165096..a5f7d0d63de 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -9,6 +9,7 @@
 #include <linux/uaccess.h>
 #include <asm/pci_x86.h>
 #include <asm/pci-functions.h>
+#include <asm/cacheflush.h>
 
 /* BIOS32 signature: "_32_" */
 #define BIOS32_SIGNATURE	(('_' << 0) + ('3' << 8) + ('2' << 16) + ('_' << 24))
@@ -25,6 +26,27 @@
 #define PCIBIOS_HW_TYPE1_SPEC		0x10
 #define PCIBIOS_HW_TYPE2_SPEC		0x20
 
+int pcibios_enabled;
+
+/* According to the BIOS specification at:
+ * http://members.datafast.net.au/dft0802/specs/bios21.pdf, we could
+ * restrict the x zone to some pages and make it ro. But this may be
+ * broken on some bios, complex to handle with static_protections.
+ * We could make the 0xe0000-0x100000 range rox, but this can break
+ * some ISA mapping.
+ *
+ * So we let's an rw and x hole when pcibios is used. This shouldn't
+ * happen for modern system with mmconfig, and if you don't want it
+ * you could disable pcibios...
+ */
+static inline void set_bios_x(void)
+{
+	pcibios_enabled = 1;
+	set_memory_x(PAGE_OFFSET + BIOS_BEGIN, (BIOS_END - BIOS_BEGIN) >> PAGE_SHIFT);
+	if (__supported_pte_mask & _PAGE_NX)
+		printk(KERN_INFO "PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.\n");
+}
+
 /*
  * This is the standard structure used to identify the entry point
  * to the BIOS32 Service Directory, as documented in
@@ -332,6 +354,7 @@ static struct pci_raw_ops * __devinit pci_find_bios(void)
 			DBG("PCI: BIOS32 Service Directory entry at 0x%lx\n",
 					bios32_entry);
 			bios32_indirect.address = bios32_entry + PAGE_OFFSET;
+			set_bios_x();
 			if (check_pcibios())
 				return &pci_bios_access;
 		}
diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c
index 117f5b8daf7..25cd4a07d09 100644
--- a/arch/x86/pci/xen.c
+++ b/arch/x86/pci/xen.c
@@ -70,6 +70,9 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi,
 struct xen_pci_frontend_ops *xen_pci_frontend;
 EXPORT_SYMBOL_GPL(xen_pci_frontend);
 
+#define XEN_PIRQ_MSI_DATA  (MSI_DATA_TRIGGER_EDGE | \
+		MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
+
 static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
 		struct msi_msg *msg)
 {
@@ -83,12 +86,7 @@ static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
 		MSI_ADDR_REDIRECTION_CPU |
 		MSI_ADDR_DEST_ID(pirq);
 
-	msg->data =
-		MSI_DATA_TRIGGER_EDGE |
-		MSI_DATA_LEVEL_ASSERT |
-		/* delivery mode reserved */
-		(3 << 8) |
-		MSI_DATA_VECTOR(0);
+	msg->data = XEN_PIRQ_MSI_DATA;
 }
 
 static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
@@ -98,8 +96,23 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	struct msi_msg msg;
 
 	list_for_each_entry(msidesc, &dev->msi_list, list) {
+		__read_msi_msg(msidesc, &msg);
+		pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) |
+			((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
+		if (xen_irq_from_pirq(pirq) >= 0 && msg.data == XEN_PIRQ_MSI_DATA) {
+			xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ?
+					"msi-x" : "msi", &irq, &pirq, XEN_ALLOC_IRQ);
+			if (irq < 0)
+				goto error;
+			ret = set_irq_msi(irq, msidesc);
+			if (ret < 0)
+				goto error_while;
+			printk(KERN_DEBUG "xen: msi already setup: msi --> irq=%d"
+					" pirq=%d\n", irq, pirq);
+			return 0;
+		}
 		xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ?
-				"msi-x" : "msi", &irq, &pirq);
+				"msi-x" : "msi", &irq, &pirq, (XEN_ALLOC_IRQ | XEN_ALLOC_PIRQ));
 		if (irq < 0 || pirq < 0)
 			goto error;
 		printk(KERN_DEBUG "xen: msi --> irq=%d, pirq=%d\n", irq, pirq);
@@ -147,8 +160,10 @@ static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 		irq = xen_allocate_pirq(v[i], 0, /* not sharable */
 			(type == PCI_CAP_ID_MSIX) ?
 			"pcifront-msi-x" : "pcifront-msi");
-		if (irq < 0)
-			return -1;
+		if (irq < 0) {
+			ret = -1;
+			goto free;
+		}
 
 		ret = set_irq_msi(irq, msidesc);
 		if (ret)
@@ -164,7 +179,7 @@ error:
 	if (ret == -ENODEV)
 		dev_err(&dev->dev, "Xen PCI frontend has not registered" \
 			" MSI/MSI-X support!\n");
-
+free:
 	kfree(v);
 	return ret;
 }
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 7bf70b812fa..021eee91c05 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -1,5 +1,7 @@
 # Platform specific code goes here
+obj-y	+= ce4100/
 obj-y	+= efi/
+obj-y	+= iris/
 obj-y	+= mrst/
 obj-y	+= olpc/
 obj-y	+= scx200/
diff --git a/arch/x86/platform/ce4100/Makefile b/arch/x86/platform/ce4100/Makefile
new file mode 100644
index 00000000000..91fc92971d9
--- /dev/null
+++ b/arch/x86/platform/ce4100/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_X86_INTEL_CE)	+= ce4100.o
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
new file mode 100644
index 00000000000..d2c0d51a717
--- /dev/null
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -0,0 +1,132 @@
+/*
+ * Intel CE4100  platform specific setup code
+ *
+ * (C) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+
+static int ce4100_i8042_detect(void)
+{
+	return 0;
+}
+
+static void __init sdv_find_smp_config(void)
+{
+}
+
+#ifdef CONFIG_SERIAL_8250
+
+
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+	offset = offset << p->regshift;
+	return readl(p->membase + offset);
+}
+
+/*
+ * The UART Tx interrupts are not set under some conditions and therefore serial
+ * transmission hangs. This is a silicon issue and has not been root caused. The
+ * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT
+ * bit of LSR register in interrupt handler to see whether at least one of these
+ * two bits is set, if so then process the transmit request. If this workaround
+ * is not applied, then the serial transmission may hang. This workaround is for
+ * errata number 9 in Errata - B step.
+*/
+
+static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset)
+{
+	unsigned int ret, ier, lsr;
+
+	if (offset == UART_IIR) {
+		offset = offset << p->regshift;
+		ret = readl(p->membase + offset);
+		if (ret & UART_IIR_NO_INT) {
+			/* see if the TX interrupt should have really set */
+			ier = mem_serial_in(p, UART_IER);
+			/* see if the UART's XMIT interrupt is enabled */
+			if (ier & UART_IER_THRI) {
+				lsr = mem_serial_in(p, UART_LSR);
+				/* now check to see if the UART should be
+				   generating an interrupt (but isn't) */
+				if (lsr & (UART_LSR_THRE | UART_LSR_TEMT))
+					ret &= ~UART_IIR_NO_INT;
+			}
+		}
+	} else
+		ret =  mem_serial_in(p, offset);
+	return ret;
+}
+
+static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value)
+{
+	offset = offset << p->regshift;
+	writel(value, p->membase + offset);
+}
+
+static void ce4100_serial_fixup(int port, struct uart_port *up,
+	unsigned short *capabilites)
+{
+#ifdef CONFIG_EARLY_PRINTK
+	/*
+	 * Over ride the legacy port configuration that comes from
+	 * asm/serial.h. Using the ioport driver then switching to the
+	 * PCI memmaped driver hangs the IOAPIC
+	 */
+	if (up->iotype !=  UPIO_MEM32) {
+		up->uartclk  = 14745600;
+		up->mapbase = 0xdffe0200;
+		set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
+				up->mapbase & PAGE_MASK);
+		up->membase =
+			(void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+		up->membase += up->mapbase & ~PAGE_MASK;
+		up->iotype   = UPIO_MEM32;
+		up->regshift = 2;
+	}
+#endif
+	up->iobase = 0;
+	up->serial_in = ce4100_mem_serial_in;
+	up->serial_out = ce4100_mem_serial_out;
+
+	*capabilites |= (1 << 12);
+}
+
+static __init void sdv_serial_fixup(void)
+{
+	serial8250_set_isa_configurator(ce4100_serial_fixup);
+}
+
+#else
+static inline void sdv_serial_fixup(void);
+#endif
+
+static void __init sdv_arch_setup(void)
+{
+	sdv_serial_fixup();
+}
+
+/*
+ * CE4100 specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_ce4100_early_setup(void)
+{
+	x86_init.oem.arch_setup = sdv_arch_setup;
+	x86_platform.i8042_detect = ce4100_i8042_detect;
+	x86_init.resources.probe_roms = x86_init_noop;
+	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+	x86_init.mpparse.find_smp_config = sdv_find_smp_config;
+}
diff --git a/arch/x86/platform/iris/Makefile b/arch/x86/platform/iris/Makefile
new file mode 100644
index 00000000000..db921983a10
--- /dev/null
+++ b/arch/x86/platform/iris/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_X86_32_IRIS)		+= iris.o
diff --git a/arch/x86/platform/iris/iris.c b/arch/x86/platform/iris/iris.c
new file mode 100644
index 00000000000..1ba7f5ed8c9
--- /dev/null
+++ b/arch/x86/platform/iris/iris.c
@@ -0,0 +1,91 @@
+/*
+ * Eurobraille/Iris power off support.
+ *
+ * Eurobraille's Iris machine is a PC with no APM or ACPI support.
+ * It is shutdown by a special I/O sequence which this module provides.
+ *
+ *  Copyright (C) Shérab <Sebastien.Hinderer@ens-lyon.org>
+ *
+ * This program is free software ; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation ; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY ; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the program ; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <asm/io.h>
+
+#define IRIS_GIO_BASE		0x340
+#define IRIS_GIO_INPUT		IRIS_GIO_BASE
+#define IRIS_GIO_OUTPUT		(IRIS_GIO_BASE + 1)
+#define IRIS_GIO_PULSE		0x80 /* First byte to send */
+#define IRIS_GIO_REST		0x00 /* Second byte to send */
+#define IRIS_GIO_NODEV		0xff /* Likely not an Iris */
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sébastien Hinderer <Sebastien.Hinderer@ens-lyon.org>");
+MODULE_DESCRIPTION("A power_off handler for Iris devices from EuroBraille");
+MODULE_SUPPORTED_DEVICE("Eurobraille/Iris");
+
+static int force;
+
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Set to one to force poweroff handler installation.");
+
+static void (*old_pm_power_off)(void);
+
+static void iris_power_off(void)
+{
+	outb(IRIS_GIO_PULSE, IRIS_GIO_OUTPUT);
+	msleep(850);
+	outb(IRIS_GIO_REST, IRIS_GIO_OUTPUT);
+}
+
+/*
+ * Before installing the power_off handler, try to make sure the OS is
+ * running on an Iris.  Since Iris does not support DMI, this is done
+ * by reading its input port and seeing whether the read value is
+ * meaningful.
+ */
+static int iris_init(void)
+{
+	unsigned char status;
+	if (force != 1) {
+		printk(KERN_ERR "The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.\n");
+		return -ENODEV;
+	}
+	status = inb(IRIS_GIO_INPUT);
+	if (status == IRIS_GIO_NODEV) {
+		printk(KERN_ERR "This machine does not seem to be an Iris. Power_off handler not installed.\n");
+		return -ENODEV;
+	}
+	old_pm_power_off = pm_power_off;
+	pm_power_off = &iris_power_off;
+	printk(KERN_INFO "Iris power_off handler installed.\n");
+
+	return 0;
+}
+
+static void iris_exit(void)
+{
+	pm_power_off = old_pm_power_off;
+	printk(KERN_INFO "Iris power_off handler uninstalled.\n");
+}
+
+module_init(iris_init);
+module_exit(iris_exit);
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
index efbbc552fa9..f61ccdd4934 100644
--- a/arch/x86/platform/mrst/Makefile
+++ b/arch/x86/platform/mrst/Makefile
@@ -1 +1,3 @@
 obj-$(CONFIG_X86_MRST)		+= mrst.o
+obj-$(CONFIG_X86_MRST)		+= vrtc.o
+obj-$(CONFIG_EARLY_PRINTK_MRST)	+= early_printk_mrst.o
diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
index 65df603622b..65df603622b 100644
--- a/arch/x86/kernel/early_printk_mrst.c
+++ b/arch/x86/platform/mrst/early_printk_mrst.c
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 79ae68154e8..ea6529e93c6 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -9,9 +9,19 @@
  * as published by the Free Software Foundation; version 2
  * of the License.
  */
+
+#define pr_fmt(fmt) "mrst: " fmt
+
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <linux/module.h>
 
@@ -23,7 +33,9 @@
 #include <asm/mrst.h>
 #include <asm/io.h>
 #include <asm/i8259.h>
+#include <asm/intel_scu_ipc.h>
 #include <asm/apb_timer.h>
+#include <asm/reboot.h>
 
 /*
  * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
@@ -59,32 +71,6 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
 EXPORT_SYMBOL_GPL(sfi_mrtc_array);
 int sfi_mrtc_num;
 
-static inline void assign_to_mp_irq(struct mpc_intsrc *m,
-				    struct mpc_intsrc *mp_irq)
-{
-	memcpy(mp_irq, m, sizeof(struct mpc_intsrc));
-}
-
-static inline int mp_irq_cmp(struct mpc_intsrc *mp_irq,
-				struct mpc_intsrc *m)
-{
-	return memcmp(mp_irq, m, sizeof(struct mpc_intsrc));
-}
-
-static void save_mp_irq(struct mpc_intsrc *m)
-{
-	int i;
-
-	for (i = 0; i < mp_irq_entries; i++) {
-		if (!mp_irq_cmp(&mp_irqs[i], m))
-			return;
-	}
-
-	assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
-	if (++mp_irq_entries == MAX_IRQ_SOURCES)
-		panic("Max # of irq sources exceeded!!\n");
-}
-
 /* parse all the mtimer info to a static mtimer array */
 static int __init sfi_parse_mtmr(struct sfi_table_header *table)
 {
@@ -102,10 +88,10 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table)
 		memcpy(sfi_mtimer_array, pentry, totallen);
 	}
 
-	printk(KERN_INFO "SFI: MTIMER info (num = %d):\n", sfi_mtimer_num);
+	pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
 	pentry = sfi_mtimer_array;
 	for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
-		printk(KERN_INFO "timer[%d]: paddr = 0x%08x, freq = %dHz,"
+		pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
 			" irq = %d\n", totallen, (u32)pentry->phys_addr,
 			pentry->freq_hz, pentry->irq);
 			if (!pentry->irq)
@@ -118,7 +104,7 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table)
 			mp_irq.srcbusirq = pentry->irq;	/* IRQ */
 			mp_irq.dstapic = MP_APIC_ALL;
 			mp_irq.dstirq = pentry->irq;
-			save_mp_irq(&mp_irq);
+			mp_save_irq(&mp_irq);
 	}
 
 	return 0;
@@ -176,19 +162,19 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
 		memcpy(sfi_mrtc_array, pentry, totallen);
 	}
 
-	printk(KERN_INFO "SFI: RTC info (num = %d):\n", sfi_mrtc_num);
+	pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
 	pentry = sfi_mrtc_array;
 	for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
-		printk(KERN_INFO "RTC[%d]: paddr = 0x%08x, irq = %d\n",
+		pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
 			totallen, (u32)pentry->phys_addr, pentry->irq);
 		mp_irq.type = MP_IOAPIC;
 		mp_irq.irqtype = mp_INT;
-		mp_irq.irqflag = 0;
+		mp_irq.irqflag = 0xf;	/* level trigger and active low */
 		mp_irq.srcbus = 0;
 		mp_irq.srcbusirq = pentry->irq;	/* IRQ */
 		mp_irq.dstapic = MP_APIC_ALL;
 		mp_irq.dstirq = pentry->irq;
-		save_mp_irq(&mp_irq);
+		mp_save_irq(&mp_irq);
 	}
 	return 0;
 }
@@ -209,6 +195,7 @@ static unsigned long __init mrst_calibrate_tsc(void)
 
 void __init mrst_time_init(void)
 {
+	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
 	switch (mrst_timer_options) {
 	case MRST_TIMER_APBT_ONLY:
 		break;
@@ -224,16 +211,10 @@ void __init mrst_time_init(void)
 		return;
 	}
 	/* we need at least one APB timer */
-	sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
 	pre_init_apic_IRQ0();
 	apbt_time_init();
 }
 
-void __init mrst_rtc_init(void)
-{
-	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
-}
-
 void __cpuinit mrst_arch_setup(void)
 {
 	if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
@@ -256,6 +237,17 @@ static int mrst_i8042_detect(void)
 	return 0;
 }
 
+/* Reboot and power off are handled by the SCU on a MID device */
+static void mrst_power_off(void)
+{
+	intel_scu_ipc_simple_command(0xf1, 1);
+}
+
+static void mrst_reboot(void)
+{
+	intel_scu_ipc_simple_command(0xf1, 0);
+}
+
 /*
  * Moorestown specific x86_init function overrides and early setup
  * calls.
@@ -281,6 +273,10 @@ void __init x86_mrst_early_setup(void)
 
 	legacy_pic = &null_legacy_pic;
 
+	/* Moorestown specific power_off/restart method */
+	pm_power_off = mrst_power_off;
+	machine_ops.emergency_restart  = mrst_reboot;
+
 	/* Avoid searching for BIOS MP tables */
 	x86_init.mpparse.find_smp_config = x86_init_noop;
 	x86_init.mpparse.get_smp_config = x86_init_uint_noop;
@@ -309,3 +305,505 @@ static inline int __init setup_x86_mrst_timer(char *arg)
 	return 0;
 }
 __setup("x86_mrst_timer=", setup_x86_mrst_timer);
+
+/*
+ * Parsing GPIO table first, since the DEVS table will need this table
+ * to map the pin name to the actual pin.
+ */
+static struct sfi_gpio_table_entry *gpio_table;
+static int gpio_num_entry;
+
+static int __init sfi_parse_gpio(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_gpio_table_entry *pentry;
+	int num, i;
+
+	if (gpio_table)
+		return 0;
+	sb = (struct sfi_table_simple *)table;
+	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
+	pentry = (struct sfi_gpio_table_entry *)sb->pentry;
+
+	gpio_table = (struct sfi_gpio_table_entry *)
+				kmalloc(num * sizeof(*pentry), GFP_KERNEL);
+	if (!gpio_table)
+		return -1;
+	memcpy(gpio_table, pentry, num * sizeof(*pentry));
+	gpio_num_entry = num;
+
+	pr_debug("GPIO pin info:\n");
+	for (i = 0; i < num; i++, pentry++)
+		pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
+		" pin = %d\n", i,
+			pentry->controller_name,
+			pentry->pin_name,
+			pentry->pin_no);
+	return 0;
+}
+
+static int get_gpio_by_name(const char *name)
+{
+	struct sfi_gpio_table_entry *pentry = gpio_table;
+	int i;
+
+	if (!pentry)
+		return -1;
+	for (i = 0; i < gpio_num_entry; i++, pentry++) {
+		if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
+			return pentry->pin_no;
+	}
+	return -1;
+}
+
+/*
+ * Here defines the array of devices platform data that IAFW would export
+ * through SFI "DEVS" table, we use name and type to match the device and
+ * its platform data.
+ */
+struct devs_id {
+	char name[SFI_NAME_LEN + 1];
+	u8 type;
+	u8 delay;
+	void *(*get_platform_data)(void *info);
+};
+
+/* the offset for the mapping of global gpio pin to irq */
+#define MRST_IRQ_OFFSET 0x100
+
+static void __init *pmic_gpio_platform_data(void *info)
+{
+	static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
+	int gpio_base = get_gpio_by_name("pmic_gpio_base");
+
+	if (gpio_base == -1)
+		gpio_base = 64;
+	pmic_gpio_pdata.gpio_base = gpio_base;
+	pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
+	pmic_gpio_pdata.gpiointr = 0xffffeff8;
+
+	return &pmic_gpio_pdata;
+}
+
+static void __init *max3111_platform_data(void *info)
+{
+	struct spi_board_info *spi_info = info;
+	int intr = get_gpio_by_name("max3111_int");
+
+	if (intr == -1)
+		return NULL;
+	spi_info->irq = intr + MRST_IRQ_OFFSET;
+	return NULL;
+}
+
+/* we have multiple max7315 on the board ... */
+#define MAX7315_NUM 2
+static void __init *max7315_platform_data(void *info)
+{
+	static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
+	static int nr;
+	struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
+	struct i2c_board_info *i2c_info = info;
+	int gpio_base, intr;
+	char base_pin_name[SFI_NAME_LEN + 1];
+	char intr_pin_name[SFI_NAME_LEN + 1];
+
+	if (nr == MAX7315_NUM) {
+		pr_err("too many max7315s, we only support %d\n",
+				MAX7315_NUM);
+		return NULL;
+	}
+	/* we have several max7315 on the board, we only need load several
+	 * instances of the same pca953x driver to cover them
+	 */
+	strcpy(i2c_info->type, "max7315");
+	if (nr++) {
+		sprintf(base_pin_name, "max7315_%d_base", nr);
+		sprintf(intr_pin_name, "max7315_%d_int", nr);
+	} else {
+		strcpy(base_pin_name, "max7315_base");
+		strcpy(intr_pin_name, "max7315_int");
+	}
+
+	gpio_base = get_gpio_by_name(base_pin_name);
+	intr = get_gpio_by_name(intr_pin_name);
+
+	if (gpio_base == -1)
+		return NULL;
+	max7315->gpio_base = gpio_base;
+	if (intr != -1) {
+		i2c_info->irq = intr + MRST_IRQ_OFFSET;
+		max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
+	} else {
+		i2c_info->irq = -1;
+		max7315->irq_base = -1;
+	}
+	return max7315;
+}
+
+static void __init *emc1403_platform_data(void *info)
+{
+	static short intr2nd_pdata;
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("thermal_int");
+	int intr2nd = get_gpio_by_name("thermal_alert");
+
+	if (intr == -1 || intr2nd == -1)
+		return NULL;
+
+	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+	return &intr2nd_pdata;
+}
+
+static void __init *lis331dl_platform_data(void *info)
+{
+	static short intr2nd_pdata;
+	struct i2c_board_info *i2c_info = info;
+	int intr = get_gpio_by_name("accel_int");
+	int intr2nd = get_gpio_by_name("accel_2");
+
+	if (intr == -1 || intr2nd == -1)
+		return NULL;
+
+	i2c_info->irq = intr + MRST_IRQ_OFFSET;
+	intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+	return &intr2nd_pdata;
+}
+
+static void __init *no_platform_data(void *info)
+{
+	return NULL;
+}
+
+static const struct devs_id __initconst device_ids[] = {
+	{"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
+	{"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
+	{"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+	{"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+	{"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
+	{"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
+	{"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+	{"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+	{},
+};
+
+#define MAX_IPCDEVS	24
+static struct platform_device *ipc_devs[MAX_IPCDEVS];
+static int ipc_next_dev;
+
+#define MAX_SCU_SPI	24
+static struct spi_board_info *spi_devs[MAX_SCU_SPI];
+static int spi_next_dev;
+
+#define MAX_SCU_I2C	24
+static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
+static int i2c_bus[MAX_SCU_I2C];
+static int i2c_next_dev;
+
+static void __init intel_scu_device_register(struct platform_device *pdev)
+{
+	if(ipc_next_dev == MAX_IPCDEVS)
+		pr_err("too many SCU IPC devices");
+	else
+		ipc_devs[ipc_next_dev++] = pdev;
+}
+
+static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
+{
+	struct spi_board_info *new_dev;
+
+	if (spi_next_dev == MAX_SCU_SPI) {
+		pr_err("too many SCU SPI devices");
+		return;
+	}
+
+	new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+	if (!new_dev) {
+		pr_err("failed to alloc mem for delayed spi dev %s\n",
+			sdev->modalias);
+		return;
+	}
+	memcpy(new_dev, sdev, sizeof(*sdev));
+
+	spi_devs[spi_next_dev++] = new_dev;
+}
+
+static void __init intel_scu_i2c_device_register(int bus,
+						struct i2c_board_info *idev)
+{
+	struct i2c_board_info *new_dev;
+
+	if (i2c_next_dev == MAX_SCU_I2C) {
+		pr_err("too many SCU I2C devices");
+		return;
+	}
+
+	new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
+	if (!new_dev) {
+		pr_err("failed to alloc mem for delayed i2c dev %s\n",
+			idev->type);
+		return;
+	}
+	memcpy(new_dev, idev, sizeof(*idev));
+
+	i2c_bus[i2c_next_dev] = bus;
+	i2c_devs[i2c_next_dev++] = new_dev;
+}
+
+/* Called by IPC driver */
+void intel_scu_devices_create(void)
+{
+	int i;
+
+	for (i = 0; i < ipc_next_dev; i++)
+		platform_device_add(ipc_devs[i]);
+
+	for (i = 0; i < spi_next_dev; i++)
+		spi_register_board_info(spi_devs[i], 1);
+
+	for (i = 0; i < i2c_next_dev; i++) {
+		struct i2c_adapter *adapter;
+		struct i2c_client *client;
+
+		adapter = i2c_get_adapter(i2c_bus[i]);
+		if (adapter) {
+			client = i2c_new_device(adapter, i2c_devs[i]);
+			if (!client)
+				pr_err("can't create i2c device %s\n",
+					i2c_devs[i]->type);
+		} else
+			i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
+	}
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_create);
+
+/* Called by IPC driver */
+void intel_scu_devices_destroy(void)
+{
+	int i;
+
+	for (i = 0; i < ipc_next_dev; i++)
+		platform_device_del(ipc_devs[i]);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
+
+static void __init install_irq_resource(struct platform_device *pdev, int irq)
+{
+	/* Single threaded */
+	static struct resource __initdata res = {
+		.name = "IRQ",
+		.flags = IORESOURCE_IRQ,
+	};
+	res.start = irq;
+	platform_device_add_resources(pdev, &res, 1);
+}
+
+static void __init sfi_handle_ipc_dev(struct platform_device *pdev)
+{
+	const struct devs_id *dev = device_ids;
+	void *pdata = NULL;
+
+	while (dev->name[0]) {
+		if (dev->type == SFI_DEV_TYPE_IPC &&
+			!strncmp(dev->name, pdev->name, SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(pdev);
+			break;
+		}
+		dev++;
+	}
+	pdev->dev.platform_data = pdata;
+	intel_scu_device_register(pdev);
+}
+
+static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
+{
+	const struct devs_id *dev = device_ids;
+	void *pdata = NULL;
+
+	while (dev->name[0]) {
+		if (dev->type == SFI_DEV_TYPE_SPI &&
+				!strncmp(dev->name, spi_info->modalias, SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(spi_info);
+			break;
+		}
+		dev++;
+	}
+	spi_info->platform_data = pdata;
+	if (dev->delay)
+		intel_scu_spi_device_register(spi_info);
+	else
+		spi_register_board_info(spi_info, 1);
+}
+
+static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
+{
+	const struct devs_id *dev = device_ids;
+	void *pdata = NULL;
+
+	while (dev->name[0]) {
+		if (dev->type == SFI_DEV_TYPE_I2C &&
+			!strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
+			pdata = dev->get_platform_data(i2c_info);
+			break;
+		}
+		dev++;
+	}
+	i2c_info->platform_data = pdata;
+
+	if (dev->delay)
+		intel_scu_i2c_device_register(bus, i2c_info);
+	else
+		i2c_register_board_info(bus, i2c_info, 1);
+ }
+
+
+static int __init sfi_parse_devs(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+	struct sfi_device_table_entry *pentry;
+	struct spi_board_info spi_info;
+	struct i2c_board_info i2c_info;
+	struct platform_device *pdev;
+	int num, i, bus;
+	int ioapic;
+	struct io_apic_irq_attr irq_attr;
+
+	sb = (struct sfi_table_simple *)table;
+	num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
+	pentry = (struct sfi_device_table_entry *)sb->pentry;
+
+	for (i = 0; i < num; i++, pentry++) {
+		if (pentry->irq != (u8)0xff) { /* native RTE case */
+			/* these SPI2 devices are not exposed to system as PCI
+			 * devices, but they have separate RTE entry in IOAPIC
+			 * so we have to enable them one by one here
+			 */
+			ioapic = mp_find_ioapic(pentry->irq);
+			irq_attr.ioapic = ioapic;
+			irq_attr.ioapic_pin = pentry->irq;
+			irq_attr.trigger = 1;
+			irq_attr.polarity = 1;
+			io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr);
+		}
+		switch (pentry->type) {
+		case SFI_DEV_TYPE_IPC:
+			/* ID as IRQ is a hack that will go away */
+			pdev = platform_device_alloc(pentry->name, pentry->irq);
+			if (pdev == NULL) {
+				pr_err("out of memory for SFI platform device '%s'.\n",
+							pentry->name);
+				continue;
+			}
+			install_irq_resource(pdev, pentry->irq);
+			pr_debug("info[%2d]: IPC bus, name = %16.16s, "
+				"irq = 0x%2x\n", i, pentry->name, pentry->irq);
+			sfi_handle_ipc_dev(pdev);
+			break;
+		case SFI_DEV_TYPE_SPI:
+			memset(&spi_info, 0, sizeof(spi_info));
+			strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+			spi_info.irq = pentry->irq;
+			spi_info.bus_num = pentry->host_num;
+			spi_info.chip_select = pentry->addr;
+			spi_info.max_speed_hz = pentry->max_freq;
+			pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
+				"irq = 0x%2x, max_freq = %d, cs = %d\n", i,
+				spi_info.bus_num,
+				spi_info.modalias,
+				spi_info.irq,
+				spi_info.max_speed_hz,
+				spi_info.chip_select);
+			sfi_handle_spi_dev(&spi_info);
+			break;
+		case SFI_DEV_TYPE_I2C:
+			memset(&i2c_info, 0, sizeof(i2c_info));
+			bus = pentry->host_num;
+			strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+			i2c_info.irq = pentry->irq;
+			i2c_info.addr = pentry->addr;
+			pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
+				"irq = 0x%2x, addr = 0x%x\n", i, bus,
+				i2c_info.type,
+				i2c_info.irq,
+				i2c_info.addr);
+			sfi_handle_i2c_dev(bus, &i2c_info);
+			break;
+		case SFI_DEV_TYPE_UART:
+		case SFI_DEV_TYPE_HSI:
+		default:
+			;
+		}
+	}
+	return 0;
+}
+
+static int __init mrst_platform_init(void)
+{
+	sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
+	sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
+	return 0;
+}
+arch_initcall(mrst_platform_init);
+
+/*
+ * we will search these buttons in SFI GPIO table (by name)
+ * and register them dynamically. Please add all possible
+ * buttons here, we will shrink them if no GPIO found.
+ */
+static struct gpio_keys_button gpio_button[] = {
+	{KEY_POWER,		-1, 1, "power_btn",	EV_KEY, 0, 3000},
+	{KEY_PROG1,		-1, 1, "prog_btn1",	EV_KEY, 0, 20},
+	{KEY_PROG2,		-1, 1, "prog_btn2",	EV_KEY, 0, 20},
+	{SW_LID,		-1, 1, "lid_switch",	EV_SW,  0, 20},
+	{KEY_VOLUMEUP,		-1, 1, "vol_up",	EV_KEY, 0, 20},
+	{KEY_VOLUMEDOWN,	-1, 1, "vol_down",	EV_KEY, 0, 20},
+	{KEY_CAMERA,		-1, 1, "camera_full",	EV_KEY, 0, 20},
+	{KEY_CAMERA_FOCUS,	-1, 1, "camera_half",	EV_KEY, 0, 20},
+	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw1",	EV_SW,  0, 20},
+	{SW_KEYPAD_SLIDE,	-1, 1, "MagSw2",	EV_SW,  0, 20},
+};
+
+static struct gpio_keys_platform_data mrst_gpio_keys = {
+	.buttons	= gpio_button,
+	.rep		= 1,
+	.nbuttons	= -1, /* will fill it after search */
+};
+
+static struct platform_device pb_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &mrst_gpio_keys,
+	},
+};
+
+/*
+ * Shrink the non-existent buttons, register the gpio button
+ * device if there is some
+ */
+static int __init pb_keys_init(void)
+{
+	struct gpio_keys_button *gb = gpio_button;
+	int i, num, good = 0;
+
+	num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
+	for (i = 0; i < num; i++) {
+		gb[i].gpio = get_gpio_by_name(gb[i].desc);
+		if (gb[i].gpio == -1)
+			continue;
+
+		if (i != good)
+			gb[good] = gb[i];
+		good++;
+	}
+
+	if (good) {
+		mrst_gpio_keys.nbuttons = good;
+		return platform_device_register(&pb_device);
+	}
+	return 0;
+}
+late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
new file mode 100644
index 00000000000..32cd7edd71a
--- /dev/null
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -0,0 +1,165 @@
+/*
+ * vrtc.c: Driver for virtual RTC device on Intel MID platform
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ * VRTC is emulated by system controller firmware, the real HW
+ * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
+ * in a memory mapped IO space that is visible to the host IA
+ * processor.
+ *
+ * This driver is based on RTC CMOS driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/platform_device.h>
+
+#include <asm/mrst.h>
+#include <asm/mrst-vrtc.h>
+#include <asm/time.h>
+#include <asm/fixmap.h>
+
+static unsigned char __iomem *vrtc_virt_base;
+
+unsigned char vrtc_cmos_read(unsigned char reg)
+{
+	unsigned char retval;
+
+	/* vRTC's registers range from 0x0 to 0xD */
+	if (reg > 0xd || !vrtc_virt_base)
+		return 0xff;
+
+	lock_cmos_prefix(reg);
+	retval = __raw_readb(vrtc_virt_base + (reg << 2));
+	lock_cmos_suffix(reg);
+	return retval;
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_read);
+
+void vrtc_cmos_write(unsigned char val, unsigned char reg)
+{
+	if (reg > 0xd || !vrtc_virt_base)
+		return;
+
+	lock_cmos_prefix(reg);
+	__raw_writeb(val, vrtc_virt_base + (reg << 2));
+	lock_cmos_suffix(reg);
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_write);
+
+unsigned long vrtc_get_time(void)
+{
+	u8 sec, min, hour, mday, mon;
+	u32 year;
+
+	while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
+		cpu_relax();
+
+	sec = vrtc_cmos_read(RTC_SECONDS);
+	min = vrtc_cmos_read(RTC_MINUTES);
+	hour = vrtc_cmos_read(RTC_HOURS);
+	mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
+	mon = vrtc_cmos_read(RTC_MONTH);
+	year = vrtc_cmos_read(RTC_YEAR);
+
+	/* vRTC YEAR reg contains the offset to 1960 */
+	year += 1960;
+
+	printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d "
+		"mon: %d year: %d\n", sec, min, hour, mday, mon, year);
+
+	return mktime(year, mon, mday, hour, min, sec);
+}
+
+/* Only care about the minutes and seconds */
+int vrtc_set_mmss(unsigned long nowtime)
+{
+	int real_sec, real_min;
+	int vrtc_min;
+
+	vrtc_min = vrtc_cmos_read(RTC_MINUTES);
+
+	real_sec = nowtime % 60;
+	real_min = nowtime / 60;
+	if (((abs(real_min - vrtc_min) + 15)/30) & 1)
+		real_min += 30;
+	real_min %= 60;
+
+	vrtc_cmos_write(real_sec, RTC_SECONDS);
+	vrtc_cmos_write(real_min, RTC_MINUTES);
+	return 0;
+}
+
+void __init mrst_rtc_init(void)
+{
+	unsigned long rtc_paddr;
+	void __iomem *virt_base;
+
+	sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
+	if (!sfi_mrtc_num)
+		return;
+
+	rtc_paddr = sfi_mrtc_array[0].phys_addr;
+
+	/* vRTC's register address may not be page aligned */
+	set_fixmap_nocache(FIX_LNW_VRTC, rtc_paddr);
+
+	virt_base = (void __iomem *)__fix_to_virt(FIX_LNW_VRTC);
+	virt_base += rtc_paddr & ~PAGE_MASK;
+	vrtc_virt_base = virt_base;
+
+	x86_platform.get_wallclock = vrtc_get_time;
+	x86_platform.set_wallclock = vrtc_set_mmss;
+}
+
+/*
+ * The Moorestown platform has a memory mapped virtual RTC device that emulates
+ * the programming interface of the RTC.
+ */
+
+static struct resource vrtc_resources[] = {
+	[0] = {
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device vrtc_device = {
+	.name		= "rtc_mrst",
+	.id		= -1,
+	.resource	= vrtc_resources,
+	.num_resources	= ARRAY_SIZE(vrtc_resources),
+};
+
+/* Register the RTC device if appropriate */
+static int __init mrst_device_create(void)
+{
+	/* No Moorestown, no device */
+	if (!mrst_identify_cpu())
+		return -ENODEV;
+	/* No timer, no device */
+	if (!sfi_mrtc_num)
+		return -ENODEV;
+
+	/* iomem resource */
+	vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr;
+	vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr +
+				MRST_VRTC_MAP_SZ;
+	/* irq resource */
+	vrtc_resources[1].start = sfi_mrtc_array[0].irq;
+	vrtc_resources[1].end = sfi_mrtc_array[0].irq;
+
+	return platform_device_register(&vrtc_device);
+}
+
+module_init(mrst_device_create);
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
index dd4c281ffe5..7785b72ecc3 100644
--- a/arch/x86/platform/sfi/sfi.c
+++ b/arch/x86/platform/sfi/sfi.c
@@ -34,23 +34,12 @@
 #ifdef CONFIG_X86_LOCAL_APIC
 static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 
-static void __init mp_sfi_register_lapic_address(unsigned long address)
-{
-	mp_lapic_addr = address;
-
-	set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
-	if (boot_cpu_physical_apicid == -1U)
-		boot_cpu_physical_apicid = read_apic_id();
-
-	pr_info("Boot CPU = %d\n", boot_cpu_physical_apicid);
-}
-
 /* All CPUs enumerated by SFI must be present and enabled */
 static void __cpuinit mp_sfi_register_lapic(u8 id)
 {
-	if (MAX_APICS - id <= 0) {
+	if (MAX_LOCAL_APIC - id <= 0) {
 		pr_warning("Processor #%d invalid (max %d)\n",
-			id, MAX_APICS);
+			id, MAX_LOCAL_APIC);
 		return;
 	}
 
@@ -110,7 +99,7 @@ static int __init sfi_parse_ioapic(struct sfi_table_header *table)
 int __init sfi_platform_init(void)
 {
 #ifdef CONFIG_X86_LOCAL_APIC
-	mp_sfi_register_lapic_address(sfi_lapic_addr);
+	register_lapic_address(sfi_lapic_addr);
 	sfi_table_parse(SFI_SIG_CPUS, NULL, NULL, sfi_parse_cpus);
 #endif
 #ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 20ea20a39e2..df58e9cad96 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1341,10 +1341,10 @@ uv_activation_descriptor_init(int node, int pnode)
 
 	/*
 	 * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
-	 * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub
+	 * per cpu; and one per cpu on the uvhub (UV_ADP_SIZE)
 	 */
-	bau_desc = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
-		UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
+	bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE
+				* UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
 	BUG_ON(!bau_desc);
 
 	pa = uv_gpa(bau_desc); /* need the real nasid*/
@@ -1402,9 +1402,9 @@ uv_payload_queue_init(int node, int pnode)
 	struct bau_payload_queue_entry *pqp_malloc;
 	struct bau_control *bcp;
 
-	pqp = (struct bau_payload_queue_entry *) kmalloc_node(
-		(DEST_Q_SIZE + 1) * sizeof(struct bau_payload_queue_entry),
-		GFP_KERNEL, node);
+	pqp = kmalloc_node((DEST_Q_SIZE + 1)
+			   * sizeof(struct bau_payload_queue_entry),
+			   GFP_KERNEL, node);
 	BUG_ON(!pqp);
 	pqp_malloc = pqp;
 
@@ -1455,7 +1455,7 @@ static void __init uv_init_uvhub(int uvhub, int vector)
 	 * the below initialization can't be in firmware because the
 	 * messaging IRQ will be determined by the OS
 	 */
-	apicid = uvhub_to_first_apicid(uvhub);
+	apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
 	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
 				      ((apicid << 32) | vector));
 }
@@ -1490,7 +1490,7 @@ calculate_destination_timeout(void)
 /*
  * initialize the bau_control structure for each cpu
  */
-static void __init uv_init_per_cpu(int nuvhubs)
+static int __init uv_init_per_cpu(int nuvhubs)
 {
 	int i;
 	int cpu;
@@ -1507,7 +1507,7 @@ static void __init uv_init_per_cpu(int nuvhubs)
 	struct bau_control *smaster = NULL;
 	struct socket_desc {
 		short num_cpus;
-		short cpu_number[16];
+		short cpu_number[MAX_CPUS_PER_SOCKET];
 	};
 	struct uvhub_desc {
 		unsigned short socket_mask;
@@ -1520,8 +1520,7 @@ static void __init uv_init_per_cpu(int nuvhubs)
 
 	timeout_us = calculate_destination_timeout();
 
-	uvhub_descs = (struct uvhub_desc *)
-		kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
+	uvhub_descs = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL);
 	memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc));
 	uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
 	for_each_present_cpu(cpu) {
@@ -1541,6 +1540,10 @@ static void __init uv_init_per_cpu(int nuvhubs)
 		sdp = &bdp->socket[socket];
 		sdp->cpu_number[sdp->num_cpus] = cpu;
 		sdp->num_cpus++;
+		if (sdp->num_cpus > MAX_CPUS_PER_SOCKET) {
+			printk(KERN_EMERG "%d cpus per socket invalid\n", sdp->num_cpus);
+			return 1;
+		}
 	}
 	for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
 		if (!(*(uvhub_mask + (uvhub/8)) & (1 << (uvhub%8))))
@@ -1571,6 +1574,12 @@ static void __init uv_init_per_cpu(int nuvhubs)
 				bcp->uvhub_master = hmaster;
 				bcp->uvhub_cpu = uv_cpu_hub_info(cpu)->
 						blade_processor_id;
+				if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) {
+					printk(KERN_EMERG
+						"%d cpus per uvhub invalid\n",
+						bcp->uvhub_cpu);
+					return 1;
+				}
 			}
 nextsocket:
 			socket++;
@@ -1596,6 +1605,7 @@ nextsocket:
 		bcp->congested_reps = congested_reps;
 		bcp->congested_period = congested_period;
 	}
+	return 0;
 }
 
 /*
@@ -1626,7 +1636,10 @@ static int __init uv_bau_init(void)
 	spin_lock_init(&disable_lock);
 	congested_cycles = microsec_2_cycles(congested_response_us);
 
-	uv_init_per_cpu(nuvhubs);
+	if (uv_init_per_cpu(nuvhubs)) {
+		nobau = 1;
+		return 0;
+	}
 
 	uv_partition_base_pnode = 0x7fffffff;
 	for (uvhub = 0; uvhub < nuvhubs; uvhub++)
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index 56e421bc379..9daf5d1af9f 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -89,6 +89,7 @@ static void uv_rtc_send_IPI(int cpu)
 
 	apicid = cpu_physical_id(cpu);
 	pnode = uv_apicid_to_pnode(apicid);
+	apicid |= uv_apicid_hibits;
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	      (apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	      (X86_PLATFORM_IPI_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
@@ -107,6 +108,7 @@ static int uv_intr_pending(int pnode)
 static int uv_setup_intr(int cpu, u64 expires)
 {
 	u64 val;
+	unsigned long apicid = cpu_physical_id(cpu) | uv_apicid_hibits;
 	int pnode = uv_cpu_to_pnode(cpu);
 
 	uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG,
@@ -117,7 +119,7 @@ static int uv_setup_intr(int cpu, u64 expires)
 		UVH_EVENT_OCCURRED0_RTC1_MASK);
 
 	val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
-		((u64)cpu_physical_id(cpu) << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
+		((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
 
 	/* Set configuration */
 	uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG, val);
diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c
index 3371bd053b8..63203767174 100644
--- a/arch/x86/platform/visws/visws_quirks.c
+++ b/arch/x86/platform/visws/visws_quirks.c
@@ -171,7 +171,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 	ver = m->apicver;
 	if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) {
 		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
-			m->apicid, MAX_APICS);
+			m->apicid, MAX_LOCAL_APIC);
 		return;
 	}
 
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 4a2afa1bac5..b6552b189bc 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -25,7 +25,7 @@ targets += vdso.so vdso.so.dbg vdso.lds $(vobjs-y)
 
 export CPPFLAGS_vdso.lds += -P -C
 
-VDSO_LDFLAGS_vdso.lds = -m elf_x86_64 -Wl,-soname=linux-vdso.so.1 \
+VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \
 		      	-Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
 
 $(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so
@@ -69,7 +69,7 @@ vdso32.so-$(VDSO32-y)		+= sysenter
 vdso32-images			= $(vdso32.so-y:%=vdso32-%.so)
 
 CPPFLAGS_vdso32.lds = $(CPPFLAGS_vdso.lds)
-VDSO_LDFLAGS_vdso32.lds = -m elf_i386 -Wl,-soname=linux-gate.so.1
+VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-soname=linux-gate.so.1
 
 # This makes sure the $(obj) subdirectory exists even though vdso32/
 # is not a kbuild sub-make subdirectory.
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 235c0f4d386..aa8c89ae54c 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -75,6 +75,11 @@ DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 enum xen_domain_type xen_domain_type = XEN_NATIVE;
 EXPORT_SYMBOL_GPL(xen_domain_type);
 
+unsigned long *machine_to_phys_mapping = (void *)MACH2PHYS_VIRT_START;
+EXPORT_SYMBOL(machine_to_phys_mapping);
+unsigned int   machine_to_phys_order;
+EXPORT_SYMBOL(machine_to_phys_order);
+
 struct start_info *xen_start_info;
 EXPORT_SYMBOL_GPL(xen_start_info);
 
@@ -569,8 +574,8 @@ static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g)
 
 	preempt_disable();
 
-	start = __get_cpu_var(idt_desc).address;
-	end = start + __get_cpu_var(idt_desc).size + 1;
+	start = __this_cpu_read(idt_desc.address);
+	end = start + __this_cpu_read(idt_desc.size) + 1;
 
 	xen_mc_flush();
 
@@ -1016,10 +1021,6 @@ static void xen_reboot(int reason)
 {
 	struct sched_shutdown r = { .reason = reason };
 
-#ifdef CONFIG_SMP
-	stop_other_cpus();
-#endif
-
 	if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r))
 		BUG();
 }
@@ -1090,6 +1091,8 @@ static void __init xen_setup_stackprotector(void)
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
 {
+	struct physdev_set_iopl set_iopl;
+	int rc;
 	pgd_t *pgd;
 
 	if (!xen_start_info)
@@ -1097,6 +1100,8 @@ asmlinkage void __init xen_start_kernel(void)
 
 	xen_domain_type = XEN_PV_DOMAIN;
 
+	xen_setup_machphys_mapping();
+
 	/* Install Xen paravirt ops */
 	pv_info = xen_info;
 	pv_init_ops = xen_init_ops;
@@ -1191,8 +1196,6 @@ asmlinkage void __init xen_start_kernel(void)
 	/* Allocate and initialize top and mid mfn levels for p2m structure */
 	xen_build_mfn_list_list();
 
-	init_mm.pgd = pgd;
-
 	/* keep using Xen gdt for now; no urgent need to change it */
 
 #ifdef CONFIG_X86_32
@@ -1202,10 +1205,18 @@ asmlinkage void __init xen_start_kernel(void)
 #else
 	pv_info.kernel_rpl = 0;
 #endif
-
 	/* set the limit of our address space */
 	xen_reserve_top();
 
+	/* We used to do this in xen_arch_setup, but that is too late on AMD
+	 * were early_cpu_init (run before ->arch_setup()) calls early_amd_init
+	 * which pokes 0xcf8 port.
+	 */
+	set_iopl.iopl = 1;
+	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
+	if (rc != 0)
+		xen_raw_printk("physdev_op failed %d\n", rc);
+
 #ifdef CONFIG_X86_32
 	/* set up basic CPUID stuff */
 	cpu_detect(&new_cpu_data);
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index c237b810b03..44924e551fd 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -2034,6 +2034,20 @@ static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
 	set_page_prot(pmd, PAGE_KERNEL_RO);
 }
 
+void __init xen_setup_machphys_mapping(void)
+{
+	struct xen_machphys_mapping mapping;
+	unsigned long machine_to_phys_nr_ents;
+
+	if (HYPERVISOR_memory_op(XENMEM_machphys_mapping, &mapping) == 0) {
+		machine_to_phys_mapping = (unsigned long *)mapping.v_start;
+		machine_to_phys_nr_ents = mapping.max_mfn + 1;
+	} else {
+		machine_to_phys_nr_ents = MACH2PHYS_NR_ENTRIES;
+	}
+	machine_to_phys_order = fls(machine_to_phys_nr_ents - 1);
+}
+
 #ifdef CONFIG_X86_64
 static void convert_pfn_mfn(void *v)
 {
@@ -2119,44 +2133,83 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 	return pgd;
 }
 #else	/* !CONFIG_X86_64 */
-static RESERVE_BRK_ARRAY(pmd_t, level2_kernel_pgt, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, initial_kernel_pmd, PTRS_PER_PMD);
+static RESERVE_BRK_ARRAY(pmd_t, swapper_kernel_pmd, PTRS_PER_PMD);
+
+static __init void xen_write_cr3_init(unsigned long cr3)
+{
+	unsigned long pfn = PFN_DOWN(__pa(swapper_pg_dir));
+
+	BUG_ON(read_cr3() != __pa(initial_page_table));
+	BUG_ON(cr3 != __pa(swapper_pg_dir));
+
+	/*
+	 * We are switching to swapper_pg_dir for the first time (from
+	 * initial_page_table) and therefore need to mark that page
+	 * read-only and then pin it.
+	 *
+	 * Xen disallows sharing of kernel PMDs for PAE
+	 * guests. Therefore we must copy the kernel PMD from
+	 * initial_page_table into a new kernel PMD to be used in
+	 * swapper_pg_dir.
+	 */
+	swapper_kernel_pmd =
+		extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
+	memcpy(swapper_kernel_pmd, initial_kernel_pmd,
+	       sizeof(pmd_t) * PTRS_PER_PMD);
+	swapper_pg_dir[KERNEL_PGD_BOUNDARY] =
+		__pgd(__pa(swapper_kernel_pmd) | _PAGE_PRESENT);
+	set_page_prot(swapper_kernel_pmd, PAGE_KERNEL_RO);
+
+	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	xen_write_cr3(cr3);
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, pfn);
+
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE,
+			  PFN_DOWN(__pa(initial_page_table)));
+	set_page_prot(initial_page_table, PAGE_KERNEL);
+	set_page_prot(initial_kernel_pmd, PAGE_KERNEL);
+
+	pv_mmu_ops.write_cr3 = &xen_write_cr3;
+}
 
 __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
 					 unsigned long max_pfn)
 {
 	pmd_t *kernel_pmd;
 
-	level2_kernel_pgt = extend_brk(sizeof(pmd_t *) * PTRS_PER_PMD, PAGE_SIZE);
+	initial_kernel_pmd =
+		extend_brk(sizeof(pmd_t) * PTRS_PER_PMD, PAGE_SIZE);
 
 	max_pfn_mapped = PFN_DOWN(__pa(xen_start_info->pt_base) +
 				  xen_start_info->nr_pt_frames * PAGE_SIZE +
 				  512*1024);
 
 	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
-	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+	memcpy(initial_kernel_pmd, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
 
-	xen_map_identity_early(level2_kernel_pgt, max_pfn);
+	xen_map_identity_early(initial_kernel_pmd, max_pfn);
 
-	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
-	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
-			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+	memcpy(initial_page_table, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+	initial_page_table[KERNEL_PGD_BOUNDARY] =
+		__pgd(__pa(initial_kernel_pmd) | _PAGE_PRESENT);
 
-	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
-	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	set_page_prot(initial_kernel_pmd, PAGE_KERNEL_RO);
+	set_page_prot(initial_page_table, PAGE_KERNEL_RO);
 	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
 
 	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
 
-	xen_write_cr3(__pa(swapper_pg_dir));
-
-	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE,
+			  PFN_DOWN(__pa(initial_page_table)));
+	xen_write_cr3(__pa(initial_page_table));
 
 	memblock_x86_reserve_range(__pa(xen_start_info->pt_base),
 		      __pa(xen_start_info->pt_base +
 			   xen_start_info->nr_pt_frames * PAGE_SIZE),
 		      "XEN PAGETABLES");
 
-	return swapper_pg_dir;
+	return initial_page_table;
 }
 #endif	/* CONFIG_X86_64 */
 
@@ -2290,7 +2343,11 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.write_cr2 = xen_write_cr2,
 
 	.read_cr3 = xen_read_cr3,
+#ifdef CONFIG_X86_32
+	.write_cr3 = xen_write_cr3_init,
+#else
 	.write_cr3 = xen_write_cr3,
+#endif
 
 	.flush_tlb_user = xen_flush_tlb,
 	.flush_tlb_kernel = xen_flush_tlb,
@@ -2358,8 +2415,6 @@ void __init xen_init_mmu_ops(void)
 	x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done;
 	pv_mmu_ops = xen_mmu_ops;
 
-	vmap_lazy_unmap = false;
-
 	memset(dummy_mapping, 0xff, PAGE_SIZE);
 }
 
@@ -2627,7 +2682,8 @@ int xen_remap_domain_mfn_range(struct vm_area_struct *vma,
 
 	prot = __pgprot(pgprot_val(prot) | _PAGE_IOMAP);
 
-	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
+	BUG_ON(!((vma->vm_flags & (VM_PFNMAP | VM_RESERVED | VM_IO)) ==
+				(VM_PFNMAP | VM_RESERVED | VM_IO)));
 
 	rmd.mfn = mfn;
 	rmd.prot = prot;
diff --git a/arch/x86/xen/multicalls.h b/arch/x86/xen/multicalls.h
index 9e565da5d1f..4ec8035e321 100644
--- a/arch/x86/xen/multicalls.h
+++ b/arch/x86/xen/multicalls.h
@@ -22,7 +22,7 @@ static inline void xen_mc_batch(void)
 	unsigned long flags;
 	/* need to disable interrupts until this entry is complete */
 	local_irq_save(flags);
-	__get_cpu_var(xen_mc_irq_flags) = flags;
+	__this_cpu_write(xen_mc_irq_flags, flags);
 }
 
 static inline struct multicall_space xen_mc_entry(size_t args)
diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c
index 0f456386cce..25c52f94a27 100644
--- a/arch/x86/xen/platform-pci-unplug.c
+++ b/arch/x86/xen/platform-pci-unplug.c
@@ -68,7 +68,7 @@ static int __init check_platform_magic(void)
 	return 0;
 }
 
-void __init xen_unplug_emulated_devices(void)
+void xen_unplug_emulated_devices(void)
 {
 	int r;
 
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index b1dbdaa23ec..b5a7f928234 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -23,7 +23,6 @@
 #include <xen/interface/callback.h>
 #include <xen/interface/memory.h>
 #include <xen/interface/physdev.h>
-#include <xen/interface/memory.h>
 #include <xen/features.h>
 
 #include "xen-ops.h"
@@ -118,16 +117,18 @@ static unsigned long __init xen_return_unused_memory(unsigned long max_pfn,
 						     const struct e820map *e820)
 {
 	phys_addr_t max_addr = PFN_PHYS(max_pfn);
-	phys_addr_t last_end = 0;
+	phys_addr_t last_end = ISA_END_ADDRESS;
 	unsigned long released = 0;
 	int i;
 
+	/* Free any unused memory above the low 1Mbyte. */
 	for (i = 0; i < e820->nr_map && last_end < max_addr; i++) {
 		phys_addr_t end = e820->map[i].addr;
 		end = min(max_addr, end);
 
-		released += xen_release_chunk(last_end, end);
-		last_end = e820->map[i].addr + e820->map[i].size;
+		if (last_end < end)
+			released += xen_release_chunk(last_end, end);
+		last_end = max(last_end, e820->map[i].addr + e820->map[i].size);
 	}
 
 	if (last_end < max_addr)
@@ -164,6 +165,7 @@ char * __init xen_memory_setup(void)
 		XENMEM_memory_map;
 	rc = HYPERVISOR_memory_op(op, &memmap);
 	if (rc == -ENOSYS) {
+		BUG_ON(xen_initial_domain());
 		memmap.nr_entries = 1;
 		map[0].addr = 0ULL;
 		map[0].size = mem_end;
@@ -179,34 +181,32 @@ char * __init xen_memory_setup(void)
 	for (i = 0; i < memmap.nr_entries; i++) {
 		unsigned long long end = map[i].addr + map[i].size;
 
-		if (map[i].type == E820_RAM) {
-			if (map[i].addr < mem_end && end > mem_end) {
-				/* Truncate region to max_mem. */
-				u64 delta = end - mem_end;
+		if (map[i].type == E820_RAM && end > mem_end) {
+			/* RAM off the end - may be partially included */
+			u64 delta = min(map[i].size, end - mem_end);
 
-				map[i].size -= delta;
-				extra_pages += PFN_DOWN(delta);
+			map[i].size -= delta;
+			end -= delta;
 
-				end = mem_end;
-			}
+			extra_pages += PFN_DOWN(delta);
 		}
 
-		if (end > xen_extra_mem_start)
+		if (map[i].size > 0 && end > xen_extra_mem_start)
 			xen_extra_mem_start = end;
 
-		/* If region is non-RAM or below mem_end, add what remains */
-		if ((map[i].type != E820_RAM || map[i].addr < mem_end) &&
-		    map[i].size > 0)
+		/* Add region if any remains */
+		if (map[i].size > 0)
 			e820_add_region(map[i].addr, map[i].size, map[i].type);
 	}
 
 	/*
-	 * Even though this is normal, usable memory under Xen, reserve
-	 * ISA memory anyway because too many things think they can poke
+	 * In domU, the ISA region is normal, usable memory, but we
+	 * reserve ISA memory anyway because too many things poke
 	 * about in there.
 	 *
-	 * In a dom0 kernel, this region is identity mapped with the
-	 * hardware ISA area, so it really is out of bounds.
+	 * In Dom0, the host E820 information can leave gaps in the
+	 * ISA range, which would cause us to release those pages.  To
+	 * avoid this, we unconditionally reserve them here.
 	 */
 	e820_add_region(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS,
 			E820_RESERVED);
@@ -244,26 +244,11 @@ char * __init xen_memory_setup(void)
 	else
 		extra_pages = 0;
 
-	if (!xen_initial_domain())
-		xen_add_extra_mem(extra_pages);
+	xen_add_extra_mem(extra_pages);
 
 	return "Xen";
 }
 
-static void xen_idle(void)
-{
-	local_irq_disable();
-
-	if (need_resched())
-		local_irq_enable();
-	else {
-		current_thread_info()->status &= ~TS_POLLING;
-		smp_mb__after_clear_bit();
-		safe_halt();
-		current_thread_info()->status |= TS_POLLING;
-	}
-}
-
 /*
  * Set the bit indicating "nosegneg" library variants should be used.
  * We only need to bother in pure 32-bit mode; compat 32-bit processes
@@ -333,9 +318,6 @@ void __cpuinit xen_enable_syscall(void)
 
 void __init xen_arch_setup(void)
 {
-	struct physdev_set_iopl set_iopl;
-	int rc;
-
 	xen_panic_handler_init();
 
 	HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
@@ -352,11 +334,6 @@ void __init xen_arch_setup(void)
 	xen_enable_sysenter();
 	xen_enable_syscall();
 
-	set_iopl.iopl = 1;
-	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
-	if (rc != 0)
-		printk(KERN_INFO "physdev_op failed %d\n", rc);
-
 #ifdef CONFIG_ACPI
 	if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
 		printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
@@ -368,7 +345,11 @@ void __init xen_arch_setup(void)
 	       MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
 	       COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
 
-	pm_idle = xen_idle;
+	/* Set up idle, making sure it calls safe_halt() pvop */
+#ifdef CONFIG_X86_32
+	boot_cpu_data.hlt_works_ok = 1;
+#endif
+	pm_idle = default_idle;
 
 	fiddle_vdso();
 }
diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c
index 23e061b9327..cc9b1e182fc 100644
--- a/arch/x86/xen/spinlock.c
+++ b/arch/x86/xen/spinlock.c
@@ -159,8 +159,8 @@ static inline struct xen_spinlock *spinning_lock(struct xen_spinlock *xl)
 {
 	struct xen_spinlock *prev;
 
-	prev = __get_cpu_var(lock_spinners);
-	__get_cpu_var(lock_spinners) = xl;
+	prev = __this_cpu_read(lock_spinners);
+	__this_cpu_write(lock_spinners, xl);
 
 	wmb();			/* set lock of interest before count */
 
@@ -179,14 +179,14 @@ static inline void unspinning_lock(struct xen_spinlock *xl, struct xen_spinlock
 	asm(LOCK_PREFIX " decw %0"
 	    : "+m" (xl->spinners) : : "memory");
 	wmb();			/* decrement count before restoring lock */
-	__get_cpu_var(lock_spinners) = prev;
+	__this_cpu_write(lock_spinners, prev);
 }
 
 static noinline int xen_spin_lock_slow(struct arch_spinlock *lock, bool irq_enable)
 {
 	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
 	struct xen_spinlock *prev;
-	int irq = __get_cpu_var(lock_kicker_irq);
+	int irq = __this_cpu_read(lock_kicker_irq);
 	int ret;
 	u64 start;
 
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 1d789d56877..9bbd63a129b 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -31,6 +31,7 @@ void xen_hvm_post_suspend(int suspend_cancelled)
 	int cpu;
 	xen_hvm_init_shared_info();
 	xen_callback_vector();
+	xen_unplug_emulated_devices();
 	if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
 		for_each_online_cpu(cpu) {
 			xen_setup_runstate_info(cpu);
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index b2bb5aa3b05..067759e3d6a 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -135,24 +135,24 @@ static void do_stolen_accounting(void)
 
 	/* Add the appropriate number of ticks of stolen time,
 	   including any left-overs from last time. */
-	stolen = runnable + offline + __get_cpu_var(xen_residual_stolen);
+	stolen = runnable + offline + __this_cpu_read(xen_residual_stolen);
 
 	if (stolen < 0)
 		stolen = 0;
 
 	ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen);
-	__get_cpu_var(xen_residual_stolen) = stolen;
+	__this_cpu_write(xen_residual_stolen, stolen);
 	account_steal_ticks(ticks);
 
 	/* Add the appropriate number of ticks of blocked time,
 	   including any left-overs from last time. */
-	blocked += __get_cpu_var(xen_residual_blocked);
+	blocked += __this_cpu_read(xen_residual_blocked);
 
 	if (blocked < 0)
 		blocked = 0;
 
 	ticks = iter_div_u64_rem(blocked, NS_PER_TICK, &blocked);
-	__get_cpu_var(xen_residual_blocked) = blocked;
+	__this_cpu_write(xen_residual_blocked, blocked);
 	account_idle_ticks(ticks);
 }
 
@@ -426,6 +426,8 @@ void xen_timer_resume(void)
 {
 	int cpu;
 
+	pvclock_resume();
+
 	if (xen_clockevent != &xen_vcpuop_clockevent)
 		return;
 
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 64044747348..9d41bf98575 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -43,7 +43,7 @@ void xen_vcpu_restore(void);
 
 void xen_callback_vector(void);
 void xen_hvm_init_shared_info(void);
-void __init xen_unplug_emulated_devices(void);
+void xen_unplug_emulated_devices(void);
 
 void __init xen_build_dynamic_phys_to_machine(void);
 
diff --git a/arch/xtensa/include/asm/ioctls.h b/arch/xtensa/include/asm/ioctls.h
index ab1800012ed..ccf1800f0b0 100644
--- a/arch/xtensa/include/asm/ioctls.h
+++ b/arch/xtensa/include/asm/ioctls.h
@@ -98,6 +98,7 @@
 #define TCSETSF2	_IOW('T', 45, struct termios2)
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T',0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TIOCSIG		_IOW('T',0x36, int)  /* Generate signal on Pty slave */
 
 #define TIOCSERCONFIG	_IO('T', 83)
diff --git a/block/blk-core.c b/block/blk-core.c
index f0834e2f572..4ce953f1b39 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1194,13 +1194,6 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 	int where = ELEVATOR_INSERT_SORT;
 	int rw_flags;
 
-	/* REQ_HARDBARRIER is no more */
-	if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER,
-		"block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) {
-		bio_endio(bio, -EOPNOTSUPP);
-		return 0;
-	}
-
 	/*
 	 * low level driver can indicate that it wants pages above a
 	 * certain limit bounced to low memory (ie for highmem, or even
@@ -1351,7 +1344,7 @@ static void handle_bad_sector(struct bio *bio)
 			bdevname(bio->bi_bdev, b),
 			bio->bi_rw,
 			(unsigned long long)bio->bi_sector + bio_sectors(bio),
-			(long long)(bio->bi_bdev->bd_inode->i_size >> 9));
+			(long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9));
 
 	set_bit(BIO_EOF, &bio->bi_flags);
 }
@@ -1404,7 +1397,7 @@ static inline int bio_check_eod(struct bio *bio, unsigned int nr_sectors)
 		return 0;
 
 	/* Test device or partition size, when known. */
-	maxsector = bio->bi_bdev->bd_inode->i_size >> 9;
+	maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9;
 	if (maxsector) {
 		sector_t sector = bio->bi_sector;
 
diff --git a/block/blk-ioc.c b/block/blk-ioc.c
index d22c4c55c40..3c7a339fe38 100644
--- a/block/blk-ioc.c
+++ b/block/blk-ioc.c
@@ -153,20 +153,6 @@ struct io_context *get_io_context(gfp_t gfp_flags, int node)
 }
 EXPORT_SYMBOL(get_io_context);
 
-void copy_io_context(struct io_context **pdst, struct io_context **psrc)
-{
-	struct io_context *src = *psrc;
-	struct io_context *dst = *pdst;
-
-	if (src) {
-		BUG_ON(atomic_long_read(&src->refcount) == 0);
-		atomic_long_inc(&src->refcount);
-		put_io_context(dst);
-		*pdst = src;
-	}
-}
-EXPORT_SYMBOL(copy_io_context);
-
 static int __init blk_ioc_init(void)
 {
 	iocontext_cachep = kmem_cache_create("blkdev_ioc",
diff --git a/block/blk-map.c b/block/blk-map.c
index d4a586d8691..e663ac2d8e6 100644
--- a/block/blk-map.c
+++ b/block/blk-map.c
@@ -201,6 +201,9 @@ int blk_rq_map_user_iov(struct request_queue *q, struct request *rq,
 	for (i = 0; i < iov_count; i++) {
 		unsigned long uaddr = (unsigned long)iov[i].iov_base;
 
+		if (!iov[i].iov_len)
+			return -EINVAL;
+
 		if (uaddr & queue_dma_alignment(q)) {
 			unaligned = 1;
 			break;
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 77b7c26df6b..74bc4a768f3 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -21,7 +21,7 @@ static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
 		return 0;
 
 	fbio = bio;
-	cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+	cluster = blk_queue_cluster(q);
 	seg_size = 0;
 	nr_phys_segs = 0;
 	for_each_bio(bio) {
@@ -87,7 +87,7 @@ EXPORT_SYMBOL(blk_recount_segments);
 static int blk_phys_contig_segment(struct request_queue *q, struct bio *bio,
 				   struct bio *nxt)
 {
-	if (!test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
+	if (!blk_queue_cluster(q))
 		return 0;
 
 	if (bio->bi_seg_back_size + nxt->bi_seg_front_size >
@@ -123,7 +123,7 @@ int blk_rq_map_sg(struct request_queue *q, struct request *rq,
 	int nsegs, cluster;
 
 	nsegs = 0;
-	cluster = test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags);
+	cluster = blk_queue_cluster(q);
 
 	/*
 	 * for each bio in rq
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 701859fb964..36c8c1f2af1 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -126,7 +126,7 @@ void blk_set_default_limits(struct queue_limits *lim)
 	lim->alignment_offset = 0;
 	lim->io_opt = 0;
 	lim->misaligned = 0;
-	lim->no_cluster = 0;
+	lim->cluster = 1;
 }
 EXPORT_SYMBOL(blk_set_default_limits);
 
@@ -229,8 +229,8 @@ void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
 EXPORT_SYMBOL(blk_queue_bounce_limit);
 
 /**
- * blk_queue_max_hw_sectors - set max sectors for a request for this queue
- * @q:  the request queue for the device
+ * blk_limits_max_hw_sectors - set hard and soft limit of max sectors for request
+ * @limits: the queue limits
  * @max_hw_sectors:  max hardware sectors in the usual 512b unit
  *
  * Description:
@@ -244,7 +244,7 @@ EXPORT_SYMBOL(blk_queue_bounce_limit);
  *    per-device basis in /sys/block/<device>/queue/max_sectors_kb.
  *    The soft limit can not exceed max_hw_sectors.
  **/
-void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
+void blk_limits_max_hw_sectors(struct queue_limits *limits, unsigned int max_hw_sectors)
 {
 	if ((max_hw_sectors << 9) < PAGE_CACHE_SIZE) {
 		max_hw_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
@@ -252,9 +252,23 @@ void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_secto
 		       __func__, max_hw_sectors);
 	}
 
-	q->limits.max_hw_sectors = max_hw_sectors;
-	q->limits.max_sectors = min_t(unsigned int, max_hw_sectors,
-				      BLK_DEF_MAX_SECTORS);
+	limits->max_hw_sectors = max_hw_sectors;
+	limits->max_sectors = min_t(unsigned int, max_hw_sectors,
+				    BLK_DEF_MAX_SECTORS);
+}
+EXPORT_SYMBOL(blk_limits_max_hw_sectors);
+
+/**
+ * blk_queue_max_hw_sectors - set max sectors for a request for this queue
+ * @q:  the request queue for the device
+ * @max_hw_sectors:  max hardware sectors in the usual 512b unit
+ *
+ * Description:
+ *    See description for blk_limits_max_hw_sectors().
+ **/
+void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_sectors)
+{
+	blk_limits_max_hw_sectors(&q->limits, max_hw_sectors);
 }
 EXPORT_SYMBOL(blk_queue_max_hw_sectors);
 
@@ -464,15 +478,6 @@ EXPORT_SYMBOL(blk_queue_io_opt);
 void blk_queue_stack_limits(struct request_queue *t, struct request_queue *b)
 {
 	blk_stack_limits(&t->limits, &b->limits, 0);
-
-	if (!t->queue_lock)
-		WARN_ON_ONCE(1);
-	else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
-		unsigned long flags;
-		spin_lock_irqsave(t->queue_lock, flags);
-		queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
-		spin_unlock_irqrestore(t->queue_lock, flags);
-	}
 }
 EXPORT_SYMBOL(blk_queue_stack_limits);
 
@@ -545,7 +550,7 @@ int blk_stack_limits(struct queue_limits *t, struct queue_limits *b,
 	t->io_min = max(t->io_min, b->io_min);
 	t->io_opt = lcm(t->io_opt, b->io_opt);
 
-	t->no_cluster |= b->no_cluster;
+	t->cluster &= b->cluster;
 	t->discard_zeroes_data &= b->discard_zeroes_data;
 
 	/* Physical block size a multiple of the logical block size? */
@@ -641,7 +646,6 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 		       sector_t offset)
 {
 	struct request_queue *t = disk->queue;
-	struct request_queue *b = bdev_get_queue(bdev);
 
 	if (bdev_stack_limits(&t->limits, bdev, offset >> 9) < 0) {
 		char top[BDEVNAME_SIZE], bottom[BDEVNAME_SIZE];
@@ -652,17 +656,6 @@ void disk_stack_limits(struct gendisk *disk, struct block_device *bdev,
 		printk(KERN_NOTICE "%s: Warning: Device %s is misaligned\n",
 		       top, bottom);
 	}
-
-	if (!t->queue_lock)
-		WARN_ON_ONCE(1);
-	else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(t->queue_lock, flags);
-		if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags))
-			queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
-		spin_unlock_irqrestore(t->queue_lock, flags);
-	}
 }
 EXPORT_SYMBOL(disk_stack_limits);
 
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 013457f47fd..41fb69150b4 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -119,7 +119,7 @@ static ssize_t queue_max_integrity_segments_show(struct request_queue *q, char *
 
 static ssize_t queue_max_segment_size_show(struct request_queue *q, char *page)
 {
-	if (test_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags))
+	if (blk_queue_cluster(q))
 		return queue_var_show(queue_max_segment_size(q), (page));
 
 	return queue_var_show(PAGE_CACHE_SIZE, (page));
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 56ad4531b41..381b09bb562 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -355,6 +355,12 @@ throtl_start_new_slice(struct throtl_data *td, struct throtl_grp *tg, bool rw)
 			tg->slice_end[rw], jiffies);
 }
 
+static inline void throtl_set_slice_end(struct throtl_data *td,
+		struct throtl_grp *tg, bool rw, unsigned long jiffy_end)
+{
+	tg->slice_end[rw] = roundup(jiffy_end, throtl_slice);
+}
+
 static inline void throtl_extend_slice(struct throtl_data *td,
 		struct throtl_grp *tg, bool rw, unsigned long jiffy_end)
 {
@@ -391,6 +397,16 @@ throtl_trim_slice(struct throtl_data *td, struct throtl_grp *tg, bool rw)
 	if (throtl_slice_used(td, tg, rw))
 		return;
 
+	/*
+	 * A bio has been dispatched. Also adjust slice_end. It might happen
+	 * that initially cgroup limit was very low resulting in high
+	 * slice_end, but later limit was bumped up and bio was dispached
+	 * sooner, then we need to reduce slice_end. A high bogus slice_end
+	 * is bad because it does not allow new slice to start.
+	 */
+
+	throtl_set_slice_end(td, tg, rw, jiffies + throtl_slice);
+
 	time_elapsed = jiffies - tg->slice_start[rw];
 
 	nr_slices = time_elapsed / throtl_slice;
@@ -645,7 +661,7 @@ static int throtl_dispatch_tg(struct throtl_data *td, struct throtl_grp *tg,
 {
 	unsigned int nr_reads = 0, nr_writes = 0;
 	unsigned int max_nr_reads = throtl_grp_quantum*3/4;
-	unsigned int max_nr_writes = throtl_grp_quantum - nr_reads;
+	unsigned int max_nr_writes = throtl_grp_quantum - max_nr_reads;
 	struct bio *bio;
 
 	/* Try to dispatch 75% READS and 25% WRITES */
@@ -709,26 +725,21 @@ static void throtl_process_limit_change(struct throtl_data *td)
 	struct throtl_grp *tg;
 	struct hlist_node *pos, *n;
 
-	/*
-	 * Make sure atomic_inc() effects from
-	 * throtl_update_blkio_group_read_bps(), group of functions are
-	 * visible.
-	 * Is this required or smp_mb__after_atomic_inc() was suffcient
-	 * after the atomic_inc().
-	 */
-	smp_rmb();
 	if (!atomic_read(&td->limits_changed))
 		return;
 
 	throtl_log(td, "limit changed =%d", atomic_read(&td->limits_changed));
 
-	hlist_for_each_entry_safe(tg, pos, n, &td->tg_list, tg_node) {
-		/*
-		 * Do I need an smp_rmb() here to make sure tg->limits_changed
-		 * update is visible. I am relying on smp_rmb() at the
-		 * beginning of function and not putting a new one here.
-		 */
+	/*
+	 * Make sure updates from throtl_update_blkio_group_read_bps() group
+	 * of functions to tg->limits_changed are visible. We do not
+	 * want update td->limits_changed to be visible but update to
+	 * tg->limits_changed not being visible yet on this cpu. Hence
+	 * the read barrier.
+	 */
+	smp_rmb();
 
+	hlist_for_each_entry_safe(tg, pos, n, &td->tg_list, tg_node) {
 		if (throtl_tg_on_rr(tg) && tg->limits_changed) {
 			throtl_log_tg(td, tg, "limit change rbps=%llu wbps=%llu"
 				" riops=%u wiops=%u", tg->bps[READ],
diff --git a/block/bsg.c b/block/bsg.c
index f20d6a789d4..0c8b64a1648 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -250,6 +250,14 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, fmode_t has_write_perm,
 	int ret, rw;
 	unsigned int dxfer_len;
 	void *dxferp = NULL;
+	struct bsg_class_device *bcd = &q->bsg_dev;
+
+	/* if the LLD has been removed then the bsg_unregister_queue will
+	 * eventually be called and the class_dev was freed, so we can no
+	 * longer use this request_queue. Return no such address.
+	 */
+	if (!bcd->class_dev)
+		return ERR_PTR(-ENXIO);
 
 	dprintk("map hdr %llx/%u %llx/%u\n", (unsigned long long) hdr->dout_xferp,
 		hdr->dout_xfer_len, (unsigned long long) hdr->din_xferp,
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index 119f07b74dc..cc3eb78e333 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -8,7 +8,6 @@
 #include <linux/hdreg.h>
 #include <linux/slab.h>
 #include <linux/syscalls.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/uaccess.h>
 
@@ -744,13 +743,13 @@ long compat_blkdev_ioctl(struct file *file, unsigned cmd, unsigned long arg)
 		bdi->ra_pages = (arg * 512) / PAGE_CACHE_SIZE;
 		return 0;
 	case BLKGETSIZE:
-		size = bdev->bd_inode->i_size;
+		size = i_size_read(bdev->bd_inode);
 		if ((size >> 9) > ~0UL)
 			return -EFBIG;
 		return compat_put_ulong(arg, size >> 9);
 
 	case BLKGETSIZE64_32:
-		return compat_put_u64(arg, bdev->bd_inode->i_size);
+		return compat_put_u64(arg, i_size_read(bdev->bd_inode));
 
 	case BLKTRACESETUP32:
 	case BLKTRACESTART: /* compatible */
diff --git a/block/elevator.c b/block/elevator.c
index 282e8308f7e..2569512830d 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -429,7 +429,7 @@ void elv_dispatch_sort(struct request_queue *q, struct request *rq)
 	q->nr_sorted--;
 
 	boundary = q->end_sector;
-	stop_flags = REQ_SOFTBARRIER | REQ_HARDBARRIER | REQ_STARTED;
+	stop_flags = REQ_SOFTBARRIER | REQ_STARTED;
 	list_for_each_prev(entry, &q->queue_head) {
 		struct request *pos = list_entry_rq(entry);
 
@@ -691,7 +691,7 @@ void elv_insert(struct request_queue *q, struct request *rq, int where)
 void __elv_add_request(struct request_queue *q, struct request *rq, int where,
 		       int plug)
 {
-	if (rq->cmd_flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
+	if (rq->cmd_flags & REQ_SOFTBARRIER) {
 		/* barriers are scheduling boundary, update end_sector */
 		if (rq->cmd_type == REQ_TYPE_FS ||
 		    (rq->cmd_flags & REQ_DISCARD)) {
diff --git a/block/ioctl.c b/block/ioctl.c
index d724ceb1d46..a9a302eba01 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -5,7 +5,6 @@
 #include <linux/hdreg.h>
 #include <linux/backing-dev.h>
 #include <linux/buffer_head.h>
-#include <linux/smp_lock.h>
 #include <linux/blktrace_api.h>
 #include <asm/uaccess.h>
 
@@ -125,7 +124,7 @@ static int blk_ioctl_discard(struct block_device *bdev, uint64_t start,
 	start >>= 9;
 	len >>= 9;
 
-	if (start + len > (bdev->bd_inode->i_size >> 9))
+	if (start + len > (i_size_read(bdev->bd_inode) >> 9))
 		return -EINVAL;
 	if (secure)
 		flags |= BLKDEV_DISCARD_SECURE;
@@ -242,6 +241,7 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 		 * We need to set the startsect first, the driver may
 		 * want to override it.
 		 */
+		memset(&geo, 0, sizeof(geo));
 		geo.start = get_start_sect(bdev);
 		ret = disk->fops->getgeo(bdev, &geo);
 		if (ret)
@@ -307,12 +307,12 @@ int blkdev_ioctl(struct block_device *bdev, fmode_t mode, unsigned cmd,
 		ret = blkdev_reread_part(bdev);
 		break;
 	case BLKGETSIZE:
-		size = bdev->bd_inode->i_size;
+		size = i_size_read(bdev->bd_inode);
 		if ((size >> 9) > ~0UL)
 			return -EFBIG;
 		return put_ulong(arg, size >> 9);
 	case BLKGETSIZE64:
-		return put_u64(arg, bdev->bd_inode->i_size);
+		return put_u64(arg, i_size_read(bdev->bd_inode));
 	case BLKTRACESTART:
 	case BLKTRACESTOP:
 	case BLKTRACESETUP:
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index a8b5a10eb5b..4f4230b79bb 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -321,33 +321,47 @@ static int sg_io(struct request_queue *q, struct gendisk *bd_disk,
 	if (hdr->iovec_count) {
 		const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
 		size_t iov_data_len;
-		struct sg_iovec *iov;
+		struct sg_iovec *sg_iov;
+		struct iovec *iov;
+		int i;
 
-		iov = kmalloc(size, GFP_KERNEL);
-		if (!iov) {
+		sg_iov = kmalloc(size, GFP_KERNEL);
+		if (!sg_iov) {
 			ret = -ENOMEM;
 			goto out;
 		}
 
-		if (copy_from_user(iov, hdr->dxferp, size)) {
-			kfree(iov);
+		if (copy_from_user(sg_iov, hdr->dxferp, size)) {
+			kfree(sg_iov);
 			ret = -EFAULT;
 			goto out;
 		}
 
+		/*
+		 * Sum up the vecs, making sure they don't overflow
+		 */
+		iov = (struct iovec *) sg_iov;
+		iov_data_len = 0;
+		for (i = 0; i < hdr->iovec_count; i++) {
+			if (iov_data_len + iov[i].iov_len < iov_data_len) {
+				kfree(sg_iov);
+				ret = -EINVAL;
+				goto out;
+			}
+			iov_data_len += iov[i].iov_len;
+		}
+
 		/* SG_IO howto says that the shorter of the two wins */
-		iov_data_len = iov_length((struct iovec *)iov,
-					  hdr->iovec_count);
 		if (hdr->dxfer_len < iov_data_len) {
-			hdr->iovec_count = iov_shorten((struct iovec *)iov,
+			hdr->iovec_count = iov_shorten(iov,
 						       hdr->iovec_count,
 						       hdr->dxfer_len);
 			iov_data_len = hdr->dxfer_len;
 		}
 
-		ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
+		ret = blk_rq_map_user_iov(q, rq, NULL, sg_iov, hdr->iovec_count,
 					  iov_data_len, GFP_KERNEL);
-		kfree(iov);
+		kfree(sg_iov);
 	} else if (hdr->dxfer_len)
 		ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
 				      GFP_KERNEL);
diff --git a/crypto/pcrypt.c b/crypto/pcrypt.c
index de3078215fe..75586f1f86e 100644
--- a/crypto/pcrypt.c
+++ b/crypto/pcrypt.c
@@ -504,7 +504,6 @@ err:
 
 static void pcrypt_fini_padata(struct padata_pcrypt *pcrypt)
 {
-	kobject_put(&pcrypt->pinst->kobj);
 	free_cpumask_var(pcrypt->cb_cpumask->mask);
 	kfree(pcrypt->cb_cpumask);
 
diff --git a/drivers/Kconfig b/drivers/Kconfig
index a2b902f4d43..3d93b3a3d63 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -111,4 +111,6 @@ source "drivers/xen/Kconfig"
 source "drivers/staging/Kconfig"
 
 source "drivers/platform/Kconfig"
+
+source "drivers/clk/Kconfig"
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index f3ebb30f1b7..bf15ce7493d 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -115,3 +115,5 @@ obj-$(CONFIG_VLYNQ)		+= vlynq/
 obj-$(CONFIG_STAGING)		+= staging/
 obj-y				+= platform/
 obj-y				+= ieee802154/
+#common clk code
+obj-y				+= clk/
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index ba9afeaa23a..25d3aaebc10 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -100,24 +100,7 @@ static const struct file_operations acpi_ac_fops = {
 	.release = single_release,
 };
 #endif
-static int get_ac_property(struct power_supply *psy,
-			   enum power_supply_property psp,
-			   union power_supply_propval *val)
-{
-	struct acpi_ac *ac = to_acpi_ac(psy);
-	switch (psp) {
-	case POWER_SUPPLY_PROP_ONLINE:
-		val->intval = ac->state;
-		break;
-	default:
-		return -EINVAL;
-	}
-	return 0;
-}
 
-static enum power_supply_property ac_props[] = {
-	POWER_SUPPLY_PROP_ONLINE,
-};
 /* --------------------------------------------------------------------------
                                AC Adapter Management
    -------------------------------------------------------------------------- */
@@ -140,6 +123,35 @@ static int acpi_ac_get_state(struct acpi_ac *ac)
 	return 0;
 }
 
+/* --------------------------------------------------------------------------
+                            sysfs I/F
+   -------------------------------------------------------------------------- */
+static int get_ac_property(struct power_supply *psy,
+			   enum power_supply_property psp,
+			   union power_supply_propval *val)
+{
+	struct acpi_ac *ac = to_acpi_ac(psy);
+
+	if (!ac)
+		return -ENODEV;
+
+	if (acpi_ac_get_state(ac))
+		return -ENODEV;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = ac->state;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
 #ifdef CONFIG_ACPI_PROCFS_POWER
 /* --------------------------------------------------------------------------
                               FS Interface (/proc)
diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c
index 2c7def95f72..4c8dea513b6 100644
--- a/drivers/acpi/acpica/evgpeinit.c
+++ b/drivers/acpi/acpica/evgpeinit.c
@@ -408,6 +408,9 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle,
 		return_ACPI_STATUS(AE_OK);
 	}
 
+	/* Disable the GPE in case it's been enabled already. */
+	(void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
+
 	/*
 	 * Add the GPE information from above to the gpe_event_info block for
 	 * use during dispatch of this GPE.
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 660a2728908..0cac7ec0d2e 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -577,9 +577,7 @@ acpi_ns_init_one_device(acpi_handle obj_handle,
 	 * as possible (without an NMI being received in the middle of
 	 * this) - so disable NMIs and initialize the device:
 	 */
-	acpi_nmi_disable();
 	status = acpi_ns_evaluate(info);
-	acpi_nmi_enable();
 
 	if (ACPI_SUCCESS(status)) {
 		walk_info->num_INI++;
diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c
index 1211c03149e..5850d320404 100644
--- a/drivers/acpi/apei/erst.c
+++ b/drivers/acpi/apei/erst.c
@@ -86,7 +86,7 @@ static struct erst_erange {
  * It is used to provide exclusive accessing for ERST Error Log
  * Address Range too.
  */
-static DEFINE_SPINLOCK(erst_lock);
+static DEFINE_RAW_SPINLOCK(erst_lock);
 
 static inline int erst_errno(int command_status)
 {
@@ -421,9 +421,9 @@ ssize_t erst_get_record_count(void)
 	if (erst_disable)
 		return -ENODEV;
 
-	spin_lock_irqsave(&erst_lock, flags);
+	raw_spin_lock_irqsave(&erst_lock, flags);
 	count = __erst_get_record_count();
-	spin_unlock_irqrestore(&erst_lock, flags);
+	raw_spin_unlock_irqrestore(&erst_lock, flags);
 
 	return count;
 }
@@ -456,9 +456,9 @@ int erst_get_next_record_id(u64 *record_id)
 	if (erst_disable)
 		return -ENODEV;
 
-	spin_lock_irqsave(&erst_lock, flags);
+	raw_spin_lock_irqsave(&erst_lock, flags);
 	rc = __erst_get_next_record_id(record_id);
-	spin_unlock_irqrestore(&erst_lock, flags);
+	raw_spin_unlock_irqrestore(&erst_lock, flags);
 
 	return rc;
 }
@@ -624,17 +624,17 @@ int erst_write(const struct cper_record_header *record)
 		return -EINVAL;
 
 	if (erst_erange.attr & ERST_RANGE_NVRAM) {
-		if (!spin_trylock_irqsave(&erst_lock, flags))
+		if (!raw_spin_trylock_irqsave(&erst_lock, flags))
 			return -EBUSY;
 		rc = __erst_write_to_nvram(record);
-		spin_unlock_irqrestore(&erst_lock, flags);
+		raw_spin_unlock_irqrestore(&erst_lock, flags);
 		return rc;
 	}
 
 	if (record->record_length > erst_erange.size)
 		return -EINVAL;
 
-	if (!spin_trylock_irqsave(&erst_lock, flags))
+	if (!raw_spin_trylock_irqsave(&erst_lock, flags))
 		return -EBUSY;
 	memcpy(erst_erange.vaddr, record, record->record_length);
 	rcd_erange = erst_erange.vaddr;
@@ -642,7 +642,7 @@ int erst_write(const struct cper_record_header *record)
 	memcpy(&rcd_erange->persistence_information, "ER", 2);
 
 	rc = __erst_write_to_storage(0);
-	spin_unlock_irqrestore(&erst_lock, flags);
+	raw_spin_unlock_irqrestore(&erst_lock, flags);
 
 	return rc;
 }
@@ -696,9 +696,9 @@ ssize_t erst_read(u64 record_id, struct cper_record_header *record,
 	if (erst_disable)
 		return -ENODEV;
 
-	spin_lock_irqsave(&erst_lock, flags);
+	raw_spin_lock_irqsave(&erst_lock, flags);
 	len = __erst_read(record_id, record, buflen);
-	spin_unlock_irqrestore(&erst_lock, flags);
+	raw_spin_unlock_irqrestore(&erst_lock, flags);
 	return len;
 }
 EXPORT_SYMBOL_GPL(erst_read);
@@ -719,20 +719,20 @@ ssize_t erst_read_next(struct cper_record_header *record, size_t buflen)
 	if (erst_disable)
 		return -ENODEV;
 
-	spin_lock_irqsave(&erst_lock, flags);
+	raw_spin_lock_irqsave(&erst_lock, flags);
 	rc = __erst_get_next_record_id(&record_id);
 	if (rc) {
-		spin_unlock_irqrestore(&erst_lock, flags);
+		raw_spin_unlock_irqrestore(&erst_lock, flags);
 		return rc;
 	}
 	/* no more record */
 	if (record_id == APEI_ERST_INVALID_RECORD_ID) {
-		spin_unlock_irqrestore(&erst_lock, flags);
+		raw_spin_unlock_irqrestore(&erst_lock, flags);
 		return 0;
 	}
 
 	len = __erst_read(record_id, record, buflen);
-	spin_unlock_irqrestore(&erst_lock, flags);
+	raw_spin_unlock_irqrestore(&erst_lock, flags);
 
 	return len;
 }
@@ -746,12 +746,12 @@ int erst_clear(u64 record_id)
 	if (erst_disable)
 		return -ENODEV;
 
-	spin_lock_irqsave(&erst_lock, flags);
+	raw_spin_lock_irqsave(&erst_lock, flags);
 	if (erst_erange.attr & ERST_RANGE_NVRAM)
 		rc = __erst_clear_from_nvram(record_id);
 	else
 		rc = __erst_clear_from_storage(record_id);
-	spin_unlock_irqrestore(&erst_lock, flags);
+	raw_spin_unlock_irqrestore(&erst_lock, flags);
 
 	return rc;
 }
diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c
index 1a3508a7fe0..daa7bc63f1d 100644
--- a/drivers/acpi/apei/hest.c
+++ b/drivers/acpi/apei/hest.c
@@ -46,9 +46,9 @@ EXPORT_SYMBOL_GPL(hest_disable);
 
 /* HEST table parsing */
 
-static struct acpi_table_hest *hest_tab;
+static struct acpi_table_hest *__read_mostly hest_tab;
 
-static int hest_esrc_len_tab[ACPI_HEST_TYPE_RESERVED] = {
+static const int hest_esrc_len_tab[ACPI_HEST_TYPE_RESERVED] = {
 	[ACPI_HEST_TYPE_IA32_CHECK] = -1,	/* need further calculation */
 	[ACPI_HEST_TYPE_IA32_CORRECTED_CHECK] = -1,
 	[ACPI_HEST_TYPE_IA32_NMI] = sizeof(struct acpi_hest_ia_nmi),
@@ -126,7 +126,7 @@ struct ghes_arr {
 	unsigned int count;
 };
 
-static int hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
+static int __init hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
 {
 	int *count = data;
 
@@ -135,7 +135,7 @@ static int hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
 	return 0;
 }
 
-static int hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
+static int __init hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
 {
 	struct platform_device *ghes_dev;
 	struct ghes_arr *ghes_arr = data;
@@ -165,7 +165,7 @@ err:
 	return rc;
 }
 
-static int hest_ghes_dev_register(unsigned int ghes_count)
+static int __init hest_ghes_dev_register(unsigned int ghes_count)
 {
 	int rc, i;
 	struct ghes_arr ghes_arr;
diff --git a/drivers/acpi/debugfs.c b/drivers/acpi/debugfs.c
index 6355b575ee5..5df67f1d6c6 100644
--- a/drivers/acpi/debugfs.c
+++ b/drivers/acpi/debugfs.c
@@ -80,7 +80,7 @@ int __init acpi_debugfs_init(void)
 	if (!acpi_dir)
 		goto err;
 
-	cm_dentry = debugfs_create_file("custom_method", S_IWUGO,
+	cm_dentry = debugfs_create_file("custom_method", S_IWUSR,
 					acpi_dir, NULL, &cm_fops);
 	if (!cm_dentry)
 		goto err;
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 372ff80b7b0..302b31ed31f 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -934,6 +934,9 @@ static struct dmi_system_id __initdata ec_dmi_table[] = {
 	ec_flag_msi, "MSI hardware", {
 	DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star")}, NULL},
 	{
+	ec_flag_msi, "MSI hardware", {
+	DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR")}, NULL},
+	{
 	ec_validate_ecdt, "ASUS hardware", {
 	DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
 	{},
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 5718566e00f..d9926afec11 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -275,13 +275,23 @@ acpi_table_parse_srat(enum acpi_srat_type id,
 int __init acpi_numa_init(void)
 {
 	int ret = 0;
+	int nr_cpu_entries = nr_cpu_ids;
+
+#ifdef CONFIG_X86
+	/*
+	 * Should not limit number with cpu num that is from NR_CPUS or nr_cpus=
+	 * SRAT cpu entries could have different order with that in MADT.
+	 * So go over all cpu entries in SRAT to get apicid to node mapping.
+	 */
+	nr_cpu_entries = MAX_LOCAL_APIC;
+#endif
 
 	/* SRAT: Static Resource Affinity Table */
 	if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
 		acpi_table_parse_srat(ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY,
-				     acpi_parse_x2apic_affinity, nr_cpu_ids);
+				     acpi_parse_x2apic_affinity, nr_cpu_entries);
 		acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
-				     acpi_parse_processor_affinity, nr_cpu_ids);
+				     acpi_parse_processor_affinity, nr_cpu_entries);
 		ret = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,
 					    acpi_parse_memory_affinity,
 					    NR_NODE_MEMBLKS);
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 966feddf6b1..055d7b701ff 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -110,9 +110,6 @@ struct acpi_ioremap {
 static LIST_HEAD(acpi_ioremaps);
 static DEFINE_SPINLOCK(acpi_ioremap_lock);
 
-#define	OSI_STRING_LENGTH_MAX 64	/* arbitrary */
-static char osi_setup_string[OSI_STRING_LENGTH_MAX];
-
 static void __init acpi_osi_setup_late(void);
 
 /*
@@ -152,8 +149,7 @@ static struct osi_linux {
 	unsigned int	enable:1;
 	unsigned int	dmi:1;
 	unsigned int	cmdline:1;
-	unsigned int	known:1;
-} osi_linux = { 0, 0, 0, 0};
+} osi_linux = {0, 0, 0};
 
 static u32 acpi_osi_handler(acpi_string interface, u32 supported)
 {
@@ -1055,13 +1051,53 @@ static int __init acpi_os_name_setup(char *str)
 
 __setup("acpi_os_name=", acpi_os_name_setup);
 
+#define	OSI_STRING_LENGTH_MAX 64	/* arbitrary */
+#define	OSI_STRING_ENTRIES_MAX 16	/* arbitrary */
+
+struct osi_setup_entry {
+	char string[OSI_STRING_LENGTH_MAX];
+	bool enable;
+};
+
+static struct osi_setup_entry __initdata osi_setup_entries[OSI_STRING_ENTRIES_MAX];
+
+void __init acpi_osi_setup(char *str)
+{
+	struct osi_setup_entry *osi;
+	bool enable = true;
+	int i;
+
+	if (!acpi_gbl_create_osi_method)
+		return;
+
+	if (str == NULL || *str == '\0') {
+		printk(KERN_INFO PREFIX "_OSI method disabled\n");
+		acpi_gbl_create_osi_method = FALSE;
+		return;
+	}
+
+	if (*str == '!') {
+		str++;
+		enable = false;
+	}
+
+	for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
+		osi = &osi_setup_entries[i];
+		if (!strcmp(osi->string, str)) {
+			osi->enable = enable;
+			break;
+		} else if (osi->string[0] == '\0') {
+			osi->enable = enable;
+			strncpy(osi->string, str, OSI_STRING_LENGTH_MAX);
+			break;
+		}
+	}
+}
+
 static void __init set_osi_linux(unsigned int enable)
 {
-	if (osi_linux.enable != enable) {
+	if (osi_linux.enable != enable)
 		osi_linux.enable = enable;
-		printk(KERN_NOTICE PREFIX "%sed _OSI(Linux)\n",
-			enable ? "Add": "Delet");
-	}
 
 	if (osi_linux.enable)
 		acpi_osi_setup("Linux");
@@ -1073,7 +1109,8 @@ static void __init set_osi_linux(unsigned int enable)
 
 static void __init acpi_cmdline_osi_linux(unsigned int enable)
 {
-	osi_linux.cmdline = 1;	/* cmdline set the default */
+	osi_linux.cmdline = 1;	/* cmdline set the default and override DMI */
+	osi_linux.dmi = 0;
 	set_osi_linux(enable);
 
 	return;
@@ -1081,15 +1118,12 @@ static void __init acpi_cmdline_osi_linux(unsigned int enable)
 
 void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d)
 {
-	osi_linux.dmi = 1;	/* DMI knows that this box asks OSI(Linux) */
-
 	printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
 
 	if (enable == -1)
 		return;
 
-	osi_linux.known = 1;	/* DMI knows which OSI(Linux) default needed */
-
+	osi_linux.dmi = 1;	/* DMI knows that this box asks OSI(Linux) */
 	set_osi_linux(enable);
 
 	return;
@@ -1104,37 +1138,44 @@ void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d)
  */
 static void __init acpi_osi_setup_late(void)
 {
-	char *str = osi_setup_string;
+	struct osi_setup_entry *osi;
+	char *str;
+	int i;
+	acpi_status status;
 
-	if (*str == '\0')
-		return;
+	for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
+		osi = &osi_setup_entries[i];
+		str = osi->string;
 
-	if (!strcmp("!Linux", str)) {
-		acpi_cmdline_osi_linux(0);	/* !enable */
-	} else if (*str == '!') {
-		if (acpi_remove_interface(++str) == AE_OK)
-			printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
-	} else if (!strcmp("Linux", str)) {
-		acpi_cmdline_osi_linux(1);	/* enable */
-	} else {
-		if (acpi_install_interface(str) == AE_OK)
-			printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
+		if (*str == '\0')
+			break;
+		if (osi->enable) {
+			status = acpi_install_interface(str);
+
+			if (ACPI_SUCCESS(status))
+				printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
+		} else {
+			status = acpi_remove_interface(str);
+
+			if (ACPI_SUCCESS(status))
+				printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
+		}
 	}
 }
 
-int __init acpi_osi_setup(char *str)
+static int __init osi_setup(char *str)
 {
-	if (str == NULL || *str == '\0') {
-		printk(KERN_INFO PREFIX "_OSI method disabled\n");
-		acpi_gbl_create_osi_method = FALSE;
-	} else {
-		strncpy(osi_setup_string, str, OSI_STRING_LENGTH_MAX);
-	}
+	if (str && !strcmp("Linux", str))
+		acpi_cmdline_osi_linux(1);
+	else if (str && !strcmp("!Linux", str))
+		acpi_cmdline_osi_linux(0);
+	else
+		acpi_osi_setup(str);
 
 	return 1;
 }
 
-__setup("acpi_osi=", acpi_osi_setup);
+__setup("acpi_osi=", osi_setup);
 
 /* enable serialization to combat AE_ALREADY_EXISTS errors */
 static int __init acpi_serialize_setup(char *str)
@@ -1530,7 +1571,7 @@ acpi_status __init acpi_os_initialize(void)
 	return AE_OK;
 }
 
-acpi_status acpi_os_initialize1(void)
+acpi_status __init acpi_os_initialize1(void)
 {
 	kacpid_wq = create_workqueue("kacpid");
 	kacpi_notify_wq = create_workqueue("kacpi_notify");
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 67dedeed144..4c9c2fb5d98 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -213,11 +213,13 @@ static int acpi_power_on(acpi_handle handle)
 				  resource->name));
 	} else {
 		result = __acpi_power_on(resource);
+		if (result)
+			resource->ref_count--;
 	}
 
 	mutex_unlock(&resource->resource_lock);
 
-	return 0;
+	return result;
 }
 
 static int acpi_power_off_device(acpi_handle handle)
@@ -465,10 +467,12 @@ int acpi_power_transition(struct acpi_device *device, int state)
 	struct acpi_handle_list *tl = NULL;	/* Target Resources */
 	int i = 0;
 
-
 	if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3))
 		return -EINVAL;
 
+	if (device->power.state == state)
+		return 0;
+
 	if ((device->power.state < ACPI_STATE_D0)
 	    || (device->power.state > ACPI_STATE_D3))
 		return -ENODEV;
@@ -488,10 +492,6 @@ int acpi_power_transition(struct acpi_device *device, int state)
 			goto end;
 	}
 
-	if (device->power.state == state) {
-		goto end;
-	}
-
 	/*
 	 * Then we dereference all power resources used in the current list.
 	 */
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index dcb38f8ddfd..a765b823aa9 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -746,7 +746,7 @@ static int acpi_idle_enter_c1(struct cpuidle_device *dev,
 	struct acpi_processor *pr;
 	struct acpi_processor_cx *cx = cpuidle_get_statedata(state);
 
-	pr = __get_cpu_var(processors);
+	pr = __this_cpu_read(processors);
 
 	if (unlikely(!pr))
 		return 0;
@@ -787,7 +787,7 @@ static int acpi_idle_enter_simple(struct cpuidle_device *dev,
 	s64 idle_time_ns;
 	s64 idle_time;
 
-	pr = __get_cpu_var(processors);
+	pr = __this_cpu_read(processors);
 
 	if (unlikely(!pr))
 		return 0;
@@ -864,7 +864,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev,
 	s64 idle_time;
 
 
-	pr = __get_cpu_var(processors);
+	pr = __this_cpu_read(processors);
 
 	if (unlikely(!pr))
 		return 0;
diff --git a/drivers/acpi/processor_thermal.c b/drivers/acpi/processor_thermal.c
index fde49b9b1d9..79cb6533289 100644
--- a/drivers/acpi/processor_thermal.c
+++ b/drivers/acpi/processor_thermal.c
@@ -156,15 +156,6 @@ static int cpufreq_set_cur_state(unsigned int cpu, int state)
 	return 0;
 }
 
-static int acpi_thermal_cpufreq_increase(unsigned int cpu)
-{
-	return -ENODEV;
-}
-static int acpi_thermal_cpufreq_decrease(unsigned int cpu)
-{
-	return -ENODEV;
-}
-
 #endif
 
 int acpi_processor_get_limit_info(struct acpi_processor *pr)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 2b6c21d86b9..29ef505c487 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -705,54 +705,85 @@ static int acpi_bus_get_perf_flags(struct acpi_device *device)
 }
 
 static acpi_status
-acpi_bus_extract_wakeup_device_power_package(struct acpi_device *device,
-					     union acpi_object *package)
+acpi_bus_extract_wakeup_device_power_package(acpi_handle handle,
+					     struct acpi_device_wakeup *wakeup)
 {
-	int i = 0;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *package = NULL;
 	union acpi_object *element = NULL;
+	acpi_status status;
+	int i = 0;
 
-	if (!device || !package || (package->package.count < 2))
+	if (!wakeup)
 		return AE_BAD_PARAMETER;
 
+	/* _PRW */
+	status = acpi_evaluate_object(handle, "_PRW", NULL, &buffer);
+	if (ACPI_FAILURE(status)) {
+		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRW"));
+		return status;
+	}
+
+	package = (union acpi_object *)buffer.pointer;
+
+	if (!package || (package->package.count < 2)) {
+		status = AE_BAD_DATA;
+		goto out;
+	}
+
 	element = &(package->package.elements[0]);
-	if (!element)
-		return AE_BAD_PARAMETER;
+	if (!element) {
+		status = AE_BAD_DATA;
+		goto out;
+	}
 	if (element->type == ACPI_TYPE_PACKAGE) {
 		if ((element->package.count < 2) ||
 		    (element->package.elements[0].type !=
 		     ACPI_TYPE_LOCAL_REFERENCE)
-		    || (element->package.elements[1].type != ACPI_TYPE_INTEGER))
-			return AE_BAD_DATA;
-		device->wakeup.gpe_device =
+		    || (element->package.elements[1].type != ACPI_TYPE_INTEGER)) {
+			status = AE_BAD_DATA;
+			goto out;
+		}
+		wakeup->gpe_device =
 		    element->package.elements[0].reference.handle;
-		device->wakeup.gpe_number =
+		wakeup->gpe_number =
 		    (u32) element->package.elements[1].integer.value;
 	} else if (element->type == ACPI_TYPE_INTEGER) {
-		device->wakeup.gpe_number = element->integer.value;
-	} else
-		return AE_BAD_DATA;
+		wakeup->gpe_device = NULL;
+		wakeup->gpe_number = element->integer.value;
+	} else {
+		status = AE_BAD_DATA;
+		goto out;
+	}
 
 	element = &(package->package.elements[1]);
 	if (element->type != ACPI_TYPE_INTEGER) {
-		return AE_BAD_DATA;
+		status = AE_BAD_DATA;
+		goto out;
 	}
-	device->wakeup.sleep_state = element->integer.value;
+	wakeup->sleep_state = element->integer.value;
 
 	if ((package->package.count - 2) > ACPI_MAX_HANDLES) {
-		return AE_NO_MEMORY;
+		status = AE_NO_MEMORY;
+		goto out;
 	}
-	device->wakeup.resources.count = package->package.count - 2;
-	for (i = 0; i < device->wakeup.resources.count; i++) {
+	wakeup->resources.count = package->package.count - 2;
+	for (i = 0; i < wakeup->resources.count; i++) {
 		element = &(package->package.elements[i + 2]);
-		if (element->type != ACPI_TYPE_LOCAL_REFERENCE)
-			return AE_BAD_DATA;
+		if (element->type != ACPI_TYPE_LOCAL_REFERENCE) {
+			status = AE_BAD_DATA;
+			goto out;
+		}
 
-		device->wakeup.resources.handles[i] = element->reference.handle;
+		wakeup->resources.handles[i] = element->reference.handle;
 	}
 
-	acpi_gpe_can_wake(device->wakeup.gpe_device, device->wakeup.gpe_number);
+	acpi_gpe_can_wake(wakeup->gpe_device, wakeup->gpe_number);
 
-	return AE_OK;
+ out:
+	kfree(buffer.pointer);
+
+	return status;
 }
 
 static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
@@ -787,26 +818,15 @@ static void acpi_bus_set_run_wake_flags(struct acpi_device *device)
 static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
 {
 	acpi_status status = 0;
-	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-	union acpi_object *package = NULL;
 	int psw_error;
 
-	/* _PRW */
-	status = acpi_evaluate_object(device->handle, "_PRW", NULL, &buffer);
-	if (ACPI_FAILURE(status)) {
-		ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PRW"));
-		goto end;
-	}
-
-	package = (union acpi_object *)buffer.pointer;
-	status = acpi_bus_extract_wakeup_device_power_package(device, package);
+	status = acpi_bus_extract_wakeup_device_power_package(device->handle,
+							      &device->wakeup);
 	if (ACPI_FAILURE(status)) {
 		ACPI_EXCEPTION((AE_INFO, status, "Extracting _PRW package"));
 		goto end;
 	}
 
-	kfree(buffer.pointer);
-
 	device->wakeup.flags.valid = 1;
 	device->wakeup.prepare_count = 0;
 	acpi_bus_set_run_wake_flags(device);
@@ -1351,6 +1371,7 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl,
 	struct acpi_bus_ops *ops = context;
 	int type;
 	unsigned long long sta;
+	struct acpi_device_wakeup wakeup;
 	struct acpi_device *device;
 	acpi_status status;
 	int result;
@@ -1360,8 +1381,10 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl,
 		return AE_OK;
 
 	if (!(sta & ACPI_STA_DEVICE_PRESENT) &&
-	    !(sta & ACPI_STA_DEVICE_FUNCTIONING))
+	    !(sta & ACPI_STA_DEVICE_FUNCTIONING)) {
+		acpi_bus_extract_wakeup_device_power_package(handle, &wakeup);
 		return AE_CTRL_DEPTH;
+	}
 
 	/*
 	 * We may already have an acpi_device from a previous enumeration.  If
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 721d93b3cee..febb153b5a6 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -27,8 +27,6 @@
 
 static u8 sleep_states[ACPI_S_STATE_COUNT];
 
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-
 static void acpi_sleep_tts_switch(u32 acpi_state)
 {
 	union acpi_object in_arg = { ACPI_TYPE_INTEGER };
@@ -81,6 +79,8 @@ static int acpi_sleep_prepare(u32 acpi_state)
 }
 
 #ifdef CONFIG_ACPI_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
 /*
  * The ACPI specification wants us to save NVS memory regions during hibernation
  * and to restore them during the subsequent resume.  Windows does that also for
@@ -427,6 +427,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
 		},
 	},
+	{
+	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-NW130D",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
+		},
+	},
 	{},
 };
 #endif /* CONFIG_SUSPEND */
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 2737b975220..e7df019d29d 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -147,6 +147,39 @@ static void amba_put_disable_pclk(struct amba_device *pcdev)
 	clk_put(pclk);
 }
 
+static int amba_get_enable_vcore(struct amba_device *pcdev)
+{
+	struct regulator *vcore = regulator_get(&pcdev->dev, "vcore");
+	int ret;
+
+	pcdev->vcore = vcore;
+
+	if (IS_ERR(vcore)) {
+		/* It is OK not to supply a vcore regulator */
+		if (PTR_ERR(vcore) == -ENODEV)
+			return 0;
+		return PTR_ERR(vcore);
+	}
+
+	ret = regulator_enable(vcore);
+	if (ret) {
+		regulator_put(vcore);
+		pcdev->vcore = ERR_PTR(-ENODEV);
+	}
+
+	return ret;
+}
+
+static void amba_put_disable_vcore(struct amba_device *pcdev)
+{
+	struct regulator *vcore = pcdev->vcore;
+
+	if (!IS_ERR(vcore)) {
+		regulator_disable(vcore);
+		regulator_put(vcore);
+	}
+}
+
 /*
  * These are the device model conversion veneers; they convert the
  * device model structures to our more specific structures.
@@ -159,6 +192,10 @@ static int amba_probe(struct device *dev)
 	int ret;
 
 	do {
+		ret = amba_get_enable_vcore(pcdev);
+		if (ret)
+			break;
+
 		ret = amba_get_enable_pclk(pcdev);
 		if (ret)
 			break;
@@ -168,6 +205,7 @@ static int amba_probe(struct device *dev)
 			break;
 
 		amba_put_disable_pclk(pcdev);
+		amba_put_disable_vcore(pcdev);
 	} while (0);
 
 	return ret;
@@ -180,6 +218,7 @@ static int amba_remove(struct device *dev)
 	int ret = drv->remove(pcdev);
 
 	amba_put_disable_pclk(pcdev);
+	amba_put_disable_vcore(pcdev);
 
 	return ret;
 }
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 11ec911016c..36e2319264b 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -128,16 +128,6 @@ config PDC_ADMA
 
 	  If unsure, say N.
 
-config PATA_MPC52xx
-	tristate "Freescale MPC52xx SoC internal IDE"
-	depends on PPC_MPC52xx && PPC_BESTCOMM
-	select PPC_BESTCOMM_ATA
-	help
-	  This option enables support for integrated IDE controller
-	  of the Freescale MPC52xx SoC.
-
-	  If unsure, say N.
-
 config PATA_OCTEON_CF
 	tristate "OCTEON Boot Bus Compact Flash support"
 	depends on CPU_CAVIUM_OCTEON
@@ -366,7 +356,7 @@ config PATA_CS5535
 
 config PATA_CS5536
 	tristate "CS5536 PATA support"
-	depends on PCI && X86 && !X86_64
+	depends on PCI
 	help
 	  This option enables support for the AMD CS5536
 	  companion chip used with the Geode LX processor family.
@@ -491,6 +481,16 @@ config PATA_MARVELL
 
 	  If unsure, say N.
 
+config PATA_MPC52xx
+	tristate "Freescale MPC52xx SoC internal IDE"
+	depends on PPC_MPC52xx && PPC_BESTCOMM
+	select PPC_BESTCOMM_ATA
+	help
+	  This option enables support for integrated IDE controller
+	  of the Freescale MPC52xx SoC.
+
+	  If unsure, say N.
+
 config PATA_NETCELL
 	tristate "NETCELL Revolution RAID support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index c501af5b12b..2b67c900a45 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 
 # SFF w/ custom DMA
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
-obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
 obj-$(CONFIG_PATA_OCTEON_CF)	+= pata_octeon_cf.o
 obj-$(CONFIG_SATA_QSTOR)	+= sata_qstor.o
 obj-$(CONFIG_SATA_SX4)		+= sata_sx4.o
@@ -52,6 +51,7 @@ obj-$(CONFIG_PATA_IT821X)	+= pata_it821x.o
 obj-$(CONFIG_PATA_JMICRON)	+= pata_jmicron.o
 obj-$(CONFIG_PATA_MACIO)	+= pata_macio.o
 obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
+obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
 obj-$(CONFIG_PATA_NETCELL)	+= pata_netcell.o
 obj-$(CONFIG_PATA_NINJA32)	+= pata_ninja32.o
 obj-$(CONFIG_PATA_NS87415)	+= pata_ns87415.o
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 7f77c67d267..0a6a943b377 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4807,9 +4807,6 @@ static void ata_verify_xfer(struct ata_queued_cmd *qc)
 {
 	struct ata_device *dev = qc->dev;
 
-	if (ata_tag_internal(qc->tag))
-		return;
-
 	if (ata_is_nodata(qc->tf.protocol))
 		return;
 
@@ -4858,14 +4855,23 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 		if (unlikely(qc->err_mask))
 			qc->flags |= ATA_QCFLAG_FAILED;
 
-		if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
-			/* always fill result TF for failed qc */
+		/*
+		 * Finish internal commands without any further processing
+		 * and always with the result TF filled.
+		 */
+		if (unlikely(ata_tag_internal(qc->tag))) {
 			fill_result_tf(qc);
+			__ata_qc_complete(qc);
+			return;
+		}
 
-			if (!ata_tag_internal(qc->tag))
-				ata_qc_schedule_eh(qc);
-			else
-				__ata_qc_complete(qc);
+		/*
+		 * Non-internal qc has failed.  Fill the result TF and
+		 * summon EH.
+		 */
+		if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
+			fill_result_tf(qc);
+			ata_qc_schedule_eh(qc);
 			return;
 		}
 
@@ -6122,7 +6128,7 @@ static void ata_port_detach(struct ata_port *ap)
 	/* it better be dead now */
 	WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED));
 
-	cancel_rearming_delayed_work(&ap->hotplug_task);
+	cancel_delayed_work_sync(&ap->hotplug_task);
 
  skip_eh:
 	if (ap->pmp_link) {
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 5e590504f3a..17a637877d0 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -3275,6 +3275,7 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 	struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
 	struct ata_eh_context *ehc = &link->eh_context;
 	struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
+	enum ata_lpm_policy old_policy = link->lpm_policy;
 	unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
 	unsigned int err_mask;
 	int rc;
@@ -3338,6 +3339,14 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 		goto fail;
 	}
 
+	/*
+	 * Low level driver acked the transition.  Issue DIPM command
+	 * with the new policy set.
+	 */
+	link->lpm_policy = policy;
+	if (ap && ap->slave_link)
+		ap->slave_link->lpm_policy = policy;
+
 	/* host config updated, enable DIPM if transitioning to MIN_POWER */
 	ata_for_each_dev(dev, link, ENABLED) {
 		if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
@@ -3353,12 +3362,14 @@ static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
 		}
 	}
 
-	link->lpm_policy = policy;
-	if (ap && ap->slave_link)
-		ap->slave_link->lpm_policy = policy;
 	return 0;
 
 fail:
+	/* restore the old policy */
+	link->lpm_policy = old_policy;
+	if (ap && ap->slave_link)
+		ap->slave_link->lpm_policy = old_policy;
+
 	/* if no device or only one more chance is left, disable LPM */
 	if (!dev || ehc->tries[dev->devno] <= 2) {
 		ata_link_printk(link, KERN_WARNING,
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index d050e073e57..66aa4bee80a 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2552,8 +2552,11 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
 		 *
 		 * If door lock fails, always clear sdev->locked to
 		 * avoid this infinite loop.
+		 *
+		 * This may happen before SCSI scan is complete.  Make
+		 * sure qc->dev->sdev isn't NULL before dereferencing.
 		 */
-		if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL)
+		if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL && qc->dev->sdev)
 			qc->dev->sdev->locked = 0;
 
 		qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
@@ -3163,8 +3166,8 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
 
 /**
  *	ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device
+ *	@shost: SCSI host of command to be sent
  *	@cmd: SCSI command to be sent
- *	@done: Completion function, called when command is complete
  *
  *	In some cases, this function translates SCSI commands into
  *	ATA taskfiles, and queues the taskfiles to be sent to
@@ -3174,37 +3177,36 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
  *	ATA and ATAPI devices appearing as SCSI devices.
  *
  *	LOCKING:
- *	Releases scsi-layer-held lock, and obtains host lock.
+ *	ATA host lock
  *
  *	RETURNS:
  *	Return value from __ata_scsi_queuecmd() if @cmd can be queued,
  *	0 otherwise.
  */
-int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
 {
 	struct ata_port *ap;
 	struct ata_device *dev;
 	struct scsi_device *scsidev = cmd->device;
-	struct Scsi_Host *shost = scsidev->host;
 	int rc = 0;
+	unsigned long irq_flags;
 
 	ap = ata_shost_to_port(shost);
 
-	spin_unlock(shost->host_lock);
-	spin_lock(ap->lock);
+	spin_lock_irqsave(ap->lock, irq_flags);
 
 	ata_scsi_dump_cdb(ap, cmd);
 
 	dev = ata_scsi_find_dev(ap, scsidev);
 	if (likely(dev))
-		rc = __ata_scsi_queuecmd(cmd, done, dev);
+		rc = __ata_scsi_queuecmd(cmd, cmd->scsi_done, dev);
 	else {
 		cmd->result = (DID_BAD_TARGET << 16);
-		done(cmd);
+		cmd->scsi_done(cmd);
 	}
 
-	spin_unlock(ap->lock);
-	spin_lock(shost->host_lock);
+	spin_unlock_irqrestore(ap->lock, irq_flags);
+
 	return rc;
 }
 
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index d05387d1e14..af6141bb1ba 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1320,7 +1320,7 @@ void ata_sff_flush_pio_task(struct ata_port *ap)
 {
 	DPRINTK("ENTER\n");
 
-	cancel_rearming_delayed_work(&ap->sff_pio_task);
+	cancel_delayed_work_sync(&ap->sff_pio_task);
 	ap->hsm_task_state = HSM_ST_IDLE;
 
 	if (ata_msg_ctl(ap))
@@ -1532,11 +1532,10 @@ static unsigned int __ata_sff_port_intr(struct ata_port *ap,
 		if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
 			return ata_sff_idle_irq(ap);
 		break;
-	case HSM_ST:
-	case HSM_ST_LAST:
-		break;
-	default:
+	case HSM_ST_IDLE:
 		return ata_sff_idle_irq(ap);
+	default:
+		break;
 	}
 
 	/* check main status, clearing INTRQ if needed */
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 21ee23f89e8..628c8fae593 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -37,10 +37,22 @@
 #include <linux/delay.h>
 #include <linux/libata.h>
 #include <scsi/scsi_host.h>
+
+#ifdef CONFIG_X86_32
 #include <asm/msr.h>
+static int use_msr;
+module_param_named(msr, use_msr, int, 0644);
+MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
+#else
+#undef rdmsr	/* avoid accidental MSR usage on, e.g. x86-64 */
+#undef wrmsr
+#define rdmsr(x, y, z) do { } while (0)
+#define wrmsr(x, y, z) do { } while (0)
+#define use_msr 0
+#endif
 
 #define DRV_NAME	"pata_cs5536"
-#define DRV_VERSION	"0.0.7"
+#define DRV_VERSION	"0.0.8"
 
 enum {
 	CFG			= 0,
@@ -75,8 +87,6 @@ enum {
 	IDE_ETC_NODMA		= 0x03,
 };
 
-static int use_msr;
-
 static const u32 msr_reg[4] = {
 	MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC,
 };
@@ -88,7 +98,7 @@ static const u8 pci_reg[4] = {
 static inline int cs5536_read(struct pci_dev *pdev, int reg, u32 *val)
 {
 	if (unlikely(use_msr)) {
-		u32 dummy;
+		u32 dummy __maybe_unused;
 
 		rdmsr(msr_reg[reg], *val, dummy);
 		return 0;
@@ -294,8 +304,6 @@ MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, cs5536);
 MODULE_VERSION(DRV_VERSION);
-module_param_named(msr, use_msr, int, 0644);
-MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
 
 module_init(cs5536_init);
 module_exit(cs5536_exit);
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index eaf194138f2..6bd9425ba5a 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -142,7 +142,7 @@ static int autospeed;		/* Chip present which snoops speed changes */
 static int pio_mask = ATA_PIO4;	/* PIO range for autospeed devices */
 static int iordy_mask = 0xFFFFFFFF;	/* Use iordy if available */
 
-#ifdef PATA_WINBOND_VLB_MODULE
+#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
 static int winbond = 1;		/* Set to probe Winbond controllers,
 					give I/O port if non standard */
 #else
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 74b82981789..fa1b95a9a7f 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -653,8 +653,6 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
 
 		ap = host->ports[i];
 		ocd = ap->dev->platform_data;
-
-		ocd = ap->dev->platform_data;
 		cf_port = ap->private_data;
 		dma_int.u64 =
 			cvmx_read_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine));
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index c21589986c6..8b677bbf2d3 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -538,7 +538,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	return 0;
 }
 
-static void svia_configure(struct pci_dev *pdev)
+static void svia_configure(struct pci_dev *pdev, int board_id)
 {
 	u8 tmp8;
 
@@ -577,7 +577,7 @@ static void svia_configure(struct pci_dev *pdev)
 	}
 
 	/*
-	 * vt6421 has problems talking to some drives.  The following
+	 * vt6420/1 has problems talking to some drives.  The following
 	 * is the fix from Joseph Chan <JosephChan@via.com.tw>.
 	 *
 	 * When host issues HOLD, device may send up to 20DW of data
@@ -596,8 +596,9 @@ static void svia_configure(struct pci_dev *pdev)
 	 *
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=15173
 	 * http://article.gmane.org/gmane.linux.ide/46352
+	 * http://thread.gmane.org/gmane.linux.kernel/1062139
 	 */
-	if (pdev->device == 0x3249) {
+	if (board_id == vt6420 || board_id == vt6421) {
 		pci_read_config_byte(pdev, 0x52, &tmp8);
 		tmp8 |= 1 << 2;
 		pci_write_config_byte(pdev, 0x52, tmp8);
@@ -652,7 +653,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	svia_configure(pdev);
+	svia_configure(pdev, board_id);
 
 	pci_set_master(pdev);
 	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
diff --git a/drivers/atm/adummy.c b/drivers/atm/adummy.c
index 46b94762125..f9b983ae687 100644
--- a/drivers/atm/adummy.c
+++ b/drivers/atm/adummy.c
@@ -154,7 +154,7 @@ static int __init adummy_init(void)
 		err = -ENOMEM;
 		goto out;
 	}
-	atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, NULL);
+	atm_dev = atm_dev_register(DEV_LABEL, NULL, &adummy_ops, -1, NULL);
 	if (!atm_dev) {
 		printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n");
 		err = -ENODEV;
diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index a33896a482e..ffe9b655292 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -2244,7 +2244,8 @@ static int __devinit amb_probe(struct pci_dev *pci_dev, const struct pci_device_
 		goto out_reset;
 	}
 
-	dev->atm_dev = atm_dev_register (DEV_LABEL, &amb_ops, -1, NULL);
+	dev->atm_dev = atm_dev_register (DEV_LABEL, &pci_dev->dev, &amb_ops, -1,
+					 NULL);
 	if (!dev->atm_dev) {
 		PRINTD (DBG_ERR, "failed to register Madge ATM adapter");
 		err = -EINVAL;
diff --git a/drivers/atm/atmtcp.c b/drivers/atm/atmtcp.c
index b9101818b47..0b0625054a8 100644
--- a/drivers/atm/atmtcp.c
+++ b/drivers/atm/atmtcp.c
@@ -366,7 +366,7 @@ static int atmtcp_create(int itf,int persist,struct atm_dev **result)
 	if (!dev_data)
 		return -ENOMEM;
 
-	dev = atm_dev_register(DEV_LABEL,&atmtcp_v_dev_ops,itf,NULL);
+	dev = atm_dev_register(DEV_LABEL,NULL,&atmtcp_v_dev_ops,itf,NULL);
 	if (!dev) {
 		kfree(dev_data);
 		return itf == -1 ? -ENOMEM : -EBUSY;
@@ -392,7 +392,10 @@ static int atmtcp_attach(struct atm_vcc *vcc,int itf)
 			atm_dev_put(dev);
 			return -EMEDIUMTYPE;
 		}
-		if (PRIV(dev)->vcc) return -EBUSY;
+		if (PRIV(dev)->vcc) {
+			atm_dev_put(dev);
+			return -EBUSY;
+		}
 	}
 	else {
 		int error;
diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 97c5898cd76..c495fae7420 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -2244,7 +2244,7 @@ static int __devinit eni_init_one(struct pci_dev *pci_dev,
 		    &zeroes);
 		if (!cpu_zeroes) goto out1;
 	}
-	dev = atm_dev_register(DEV_LABEL,&ops,-1,NULL);
+	dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
 	if (!dev) goto out2;
 	pci_set_drvdata(pci_dev, dev);
 	eni_dev->pci_dev = pci_dev;
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 5d86bb803e9..7d912baf01d 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1911,7 +1911,7 @@ static int __devinit firestream_init_one (struct pci_dev *pci_dev,
 		    fs_dev, sizeof (struct fs_dev));
 	if (!fs_dev)
 		goto err_out;
-	atm_dev = atm_dev_register("fs", &ops, -1, NULL);
+	atm_dev = atm_dev_register("fs", &pci_dev->dev, &ops, -1, NULL);
 	if (!atm_dev)
 		goto err_out_free_fs_dev;
   
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index c8fc69c85a0..44f77850777 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -92,7 +92,7 @@
 
 #define FORE200E_INDEX(virt_addr, type, index)     (&((type *)(virt_addr))[ index ])
 
-#define FORE200E_NEXT_ENTRY(index, modulo)         (index = ++(index) % (modulo))
+#define FORE200E_NEXT_ENTRY(index, modulo)         (index = ((index) + 1) % (modulo))
 
 #if 1
 #define ASSERT(expr)     if (!(expr)) { \
@@ -2567,14 +2567,14 @@ release:
 
 
 static int __devinit
-fore200e_register(struct fore200e* fore200e)
+fore200e_register(struct fore200e* fore200e, struct device *parent)
 {
     struct atm_dev* atm_dev;
 
     DPRINTK(2, "device %s being registered\n", fore200e->name);
 
-    atm_dev = atm_dev_register(fore200e->bus->proc_name, &fore200e_ops, -1,
-      NULL); 
+    atm_dev = atm_dev_register(fore200e->bus->proc_name, parent, &fore200e_ops,
+                               -1, NULL);
     if (atm_dev == NULL) {
 	printk(FORE200E "unable to register device %s\n", fore200e->name);
 	return -ENODEV;
@@ -2594,9 +2594,9 @@ fore200e_register(struct fore200e* fore200e)
 
 
 static int __devinit
-fore200e_init(struct fore200e* fore200e)
+fore200e_init(struct fore200e* fore200e, struct device *parent)
 {
-    if (fore200e_register(fore200e) < 0)
+    if (fore200e_register(fore200e, parent) < 0)
 	return -ENODEV;
     
     if (fore200e->bus->configure(fore200e) < 0)
@@ -2662,7 +2662,7 @@ static int __devinit fore200e_sba_probe(struct platform_device *op,
 
 	sprintf(fore200e->name, "%s-%d", bus->model_name, index);
 
-	err = fore200e_init(fore200e);
+	err = fore200e_init(fore200e, &op->dev);
 	if (err < 0) {
 		fore200e_shutdown(fore200e);
 		kfree(fore200e);
@@ -2740,7 +2740,7 @@ fore200e_pca_detect(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent
 
     sprintf(fore200e->name, "%s-%d", bus->model_name, index);
 
-    err = fore200e_init(fore200e);
+    err = fore200e_init(fore200e, &pci_dev->dev);
     if (err < 0) {
 	fore200e_shutdown(fore200e);
 	goto out_free;
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 801e8b6e9d1..6cf59bf281d 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -366,7 +366,7 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent)
 		goto init_one_failure;
 	}
 
-	atm_dev = atm_dev_register(DEV_LABEL, &he_ops, -1, NULL);
+	atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &he_ops, -1, NULL);
 	if (!atm_dev) {
 		err = -ENODEV;
 		goto init_one_failure;
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index a95790452a6..24761e1d664 100644
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -2733,7 +2733,8 @@ static int __devinit hrz_probe(struct pci_dev *pci_dev, const struct pci_device_
 	PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p",
 	       iobase, irq, membase);
 
-	dev->atm_dev = atm_dev_register(DEV_LABEL, &hrz_ops, -1, NULL);
+	dev->atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &hrz_ops, -1,
+					NULL);
 	if (!(dev->atm_dev)) {
 		PRINTD(DBG_ERR, "failed to register Madge ATM adapter");
 		err = -EINVAL;
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index bce57328ddd..bfb7feee040 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3698,7 +3698,8 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
 		goto err_out_iounmap;
 	}
 
-	dev = atm_dev_register("idt77252", &idt77252_ops, -1, NULL);
+	dev = atm_dev_register("idt77252", &pcidev->dev, &idt77252_ops, -1,
+			       NULL);
 	if (!dev) {
 		printk("%s: can't register atm device\n", card->name);
 		err = -EIO;
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 9309d4724e1..72925405375 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -3172,7 +3172,7 @@ static int __devinit ia_init_one(struct pci_dev *pdev,
 		ret = -ENODEV;
 		goto err_out_free_iadev;
 	}
-	dev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+	dev = atm_dev_register(DEV_LABEL, &pdev->dev, &ops, -1, NULL);
 	if (!dev) {
 		ret = -ENOMEM;
 		goto err_out_disable_dev;
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index cbe15a86c66..52880c8387d 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -2241,11 +2241,8 @@ static int __devinit lanai_dev_open(struct atm_dev *atmdev)
 	memcpy(atmdev->esi, eeprom_mac(lanai), ESI_LEN);
 	lanai_timed_poll_start(lanai);
 	printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
-	    "(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number,
-	    (int) lanai->pci->revision, (unsigned long) lanai->base,
-	    lanai->pci->irq,
-	    atmdev->esi[0], atmdev->esi[1], atmdev->esi[2],
-	    atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]);
+		"(%pMF)\n", lanai->number, (int) lanai->pci->revision,
+		(unsigned long) lanai->base, lanai->pci->irq, atmdev->esi);
 	printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
 	    "board_rev=%d\n", lanai->number,
 	    lanai->type==lanai2 ? "2" : "HB", (unsigned int) lanai->serialno,
@@ -2591,7 +2588,7 @@ static int __devinit lanai_init_one(struct pci_dev *pci,
 		return -ENOMEM;
 	}
 
-	atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+	atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL);
 	if (atmdev == NULL) {
 		printk(KERN_ERR DEV_LABEL
 		    ": couldn't register atm device!\n");
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 2f3516b7f11..6b313ee9231 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -771,7 +771,8 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev)
 	}
 
 	/* Register device */
-	card->atmdev = atm_dev_register("nicstar", &atm_ops, -1, NULL);
+	card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops,
+					-1, NULL);
 	if (card->atmdev == NULL) {
 		printk("nicstar%d: can't register device.\n", i);
 		error = 17;
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 2e08c996fd3..73fb1c4f4cd 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -166,7 +166,7 @@ static irqreturn_t solos_irq(int irq, void *dev_id);
 static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
 static int list_vccs(int vci);
 static void release_vccs(struct atm_dev *dev);
-static int atm_init(struct solos_card *);
+static int atm_init(struct solos_card *, struct device *);
 static void atm_remove(struct solos_card *);
 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
 static void solos_bh(unsigned long);
@@ -1210,7 +1210,7 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (db_firmware_upgrade)
 		flash_upgrade(card, 3);
 
-	err = atm_init(card);
+	err = atm_init(card, &dev->dev);
 	if (err)
 		goto out_free_irq;
 
@@ -1233,7 +1233,7 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	return err;
 }
 
-static int atm_init(struct solos_card *card)
+static int atm_init(struct solos_card *card, struct device *parent)
 {
 	int i;
 
@@ -1244,7 +1244,7 @@ static int atm_init(struct solos_card *card)
 		skb_queue_head_init(&card->tx_queue[i]);
 		skb_queue_head_init(&card->cli_queue[i]);
 
-		card->atmdev[i] = atm_dev_register("solos-pci", &fpga_ops, -1, NULL);
+		card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
 		if (!card->atmdev[i]) {
 			dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
 			atm_remove(card);
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 4e885d2da49..624917902b6 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -1597,7 +1597,7 @@ static int __devinit zatm_init_one(struct pci_dev *pci_dev,
 		goto out;
 	}
 
-	dev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+	dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
 	if (!dev)
 		goto out_free;
 
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 31b526661ec..ead3e79d6fc 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -475,20 +475,33 @@ End:
  */
 void dpm_resume_noirq(pm_message_t state)
 {
-	struct device *dev;
+	struct list_head list;
 	ktime_t starttime = ktime_get();
 
+	INIT_LIST_HEAD(&list);
 	mutex_lock(&dpm_list_mtx);
 	transition_started = false;
-	list_for_each_entry(dev, &dpm_list, power.entry)
+	while (!list_empty(&dpm_list)) {
+		struct device *dev = to_device(dpm_list.next);
+
+		get_device(dev);
 		if (dev->power.status > DPM_OFF) {
 			int error;
 
 			dev->power.status = DPM_OFF;
+			mutex_unlock(&dpm_list_mtx);
+
 			error = device_resume_noirq(dev, state);
+
+			mutex_lock(&dpm_list_mtx);
 			if (error)
 				pm_dev_err(dev, state, " early", error);
 		}
+		if (!list_empty(&dev->power.entry))
+			list_move_tail(&dev->power.entry, &list);
+		put_device(dev);
+	}
+	list_splice(&list, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
 	dpm_show_time(starttime, state, "early");
 	resume_device_irqs();
@@ -789,20 +802,33 @@ End:
  */
 int dpm_suspend_noirq(pm_message_t state)
 {
-	struct device *dev;
+	struct list_head list;
 	ktime_t starttime = ktime_get();
 	int error = 0;
 
+	INIT_LIST_HEAD(&list);
 	suspend_device_irqs();
 	mutex_lock(&dpm_list_mtx);
-	list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
+	while (!list_empty(&dpm_list)) {
+		struct device *dev = to_device(dpm_list.prev);
+
+		get_device(dev);
+		mutex_unlock(&dpm_list_mtx);
+
 		error = device_suspend_noirq(dev, state);
+
+		mutex_lock(&dpm_list_mtx);
 		if (error) {
 			pm_dev_err(dev, state, " late", error);
+			put_device(dev);
 			break;
 		}
 		dev->power.status = DPM_OFF_IRQ;
+		if (!list_empty(&dev->power.entry))
+			list_move(&dev->power.entry, &list);
+		put_device(dev);
 	}
+	list_splice_tail(&list, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
 	if (error)
 		dpm_resume_noirq(resume_event(state));
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index a1725e6488d..7888501ad9e 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1341,7 +1341,7 @@ static struct request *set_next_request(void)
 {
 	struct request_queue *q;
 	int cnt = FD_MAX_UNITS;
-	struct request *rq;
+	struct request *rq = NULL;
 
 	/* Find next queue we can dispatch from */
 	fdc_queue = fdc_queue + 1;
diff --git a/drivers/block/aoe/aoeblk.c b/drivers/block/aoe/aoeblk.c
index 541e1887996..528f6318ded 100644
--- a/drivers/block/aoe/aoeblk.c
+++ b/drivers/block/aoe/aoeblk.c
@@ -180,9 +180,6 @@ aoeblk_make_request(struct request_queue *q, struct bio *bio)
 		BUG();
 		bio_endio(bio, -ENXIO);
 		return 0;
-	} else if (bio->bi_rw & REQ_HARDBARRIER) {
-		bio_endio(bio, -EOPNOTSUPP);
-		return 0;
 	} else if (bio->bi_io_vec == NULL) {
 		printk(KERN_ERR "aoe: bi_io_vec is NULL\n");
 		BUG();
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 4e4cc6c828c..605a67e40bb 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1399,7 +1399,7 @@ static struct request *set_next_request(void)
 {
 	struct request_queue *q;
 	int old_pos = fdc_queue;
-	struct request *rq;
+	struct request *rq = NULL;
 
 	do {
 		q = unit[fdc_queue].disk->queue;
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 2cc4dda4627..8e0f9256eb5 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -66,6 +66,7 @@ MODULE_VERSION("3.6.26");
 MODULE_LICENSE("GPL");
 
 static DEFINE_MUTEX(cciss_mutex);
+static struct proc_dir_entry *proc_cciss;
 
 #include "cciss_cmd.h"
 #include "cciss.h"
@@ -113,6 +114,8 @@ static struct board_type products[] = {
 	{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
 	{0x40910E11, "Smart Array 6i", &SA5_access},
 	{0x3225103C, "Smart Array P600", &SA5_access},
+	{0x3223103C, "Smart Array P800", &SA5_access},
+	{0x3234103C, "Smart Array P400", &SA5_access},
 	{0x3235103C, "Smart Array P400i", &SA5_access},
 	{0x3211103C, "Smart Array E200i", &SA5_access},
 	{0x3212103C, "Smart Array E200", &SA5_access},
@@ -361,8 +364,6 @@ static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
 #define ENG_GIG_FACTOR (ENG_GIG/512)
 #define ENGAGE_SCSI	"engage scsi"
 
-static struct proc_dir_entry *proc_cciss;
-
 static void cciss_seq_show_header(struct seq_file *seq)
 {
 	ctlr_info_t *h = seq->private;
@@ -2833,6 +2834,8 @@ static int cciss_revalidate(struct gendisk *disk)
 	InquiryData_struct *inq_buff = NULL;
 
 	for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
+		if (!h->drv[logvol])
+			continue;
 		if (memcmp(h->drv[logvol]->LunID, drv->LunID,
 			sizeof(drv->LunID)) == 0) {
 			FOUND = 1;
@@ -3753,7 +3756,7 @@ static void __devinit cciss_wait_for_mode_change_ack(ctlr_info_t *h)
 	for (i = 0; i < MAX_CONFIG_WAIT; i++) {
 		if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
 			break;
-		msleep(10);
+		usleep_range(10000, 20000);
 	}
 }
 
@@ -3937,10 +3940,9 @@ static int __devinit cciss_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
 	*board_id = ((subsystem_device_id << 16) & 0xffff0000) |
 			subsystem_vendor_id;
 
-	for (i = 0; i < ARRAY_SIZE(products); i++) {
+	for (i = 0; i < ARRAY_SIZE(products); i++)
 		if (*board_id == products[i].board_id)
 			return i;
-	}
 	dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x, ignoring.\n",
 		*board_id);
 	return -ENODEV;
@@ -3971,18 +3973,31 @@ static int __devinit cciss_pci_find_memory_BAR(struct pci_dev *pdev,
 	return -ENODEV;
 }
 
-static int __devinit cciss_wait_for_board_ready(ctlr_info_t *h)
+static int __devinit cciss_wait_for_board_state(struct pci_dev *pdev,
+	void __iomem *vaddr, int wait_for_ready)
+#define BOARD_READY 1
+#define BOARD_NOT_READY 0
 {
-	int i;
+	int i, iterations;
 	u32 scratchpad;
 
-	for (i = 0; i < CCISS_BOARD_READY_ITERATIONS; i++) {
-		scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
-		if (scratchpad == CCISS_FIRMWARE_READY)
-			return 0;
+	if (wait_for_ready)
+		iterations = CCISS_BOARD_READY_ITERATIONS;
+	else
+		iterations = CCISS_BOARD_NOT_READY_ITERATIONS;
+
+	for (i = 0; i < iterations; i++) {
+		scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
+		if (wait_for_ready) {
+			if (scratchpad == CCISS_FIRMWARE_READY)
+				return 0;
+		} else {
+			if (scratchpad != CCISS_FIRMWARE_READY)
+				return 0;
+		}
 		msleep(CCISS_BOARD_READY_POLL_INTERVAL_MSECS);
 	}
-	dev_warn(&h->pdev->dev, "board not ready, timed out.\n");
+	dev_warn(&pdev->dev, "board not ready, timed out.\n");
 	return -ENODEV;
 }
 
@@ -4031,6 +4046,11 @@ static int __devinit cciss_find_cfgtables(ctlr_info_t *h)
 static void __devinit cciss_get_max_perf_mode_cmds(struct ctlr_info *h)
 {
 	h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+
+	/* Limit commands in memory limited kdump scenario. */
+	if (reset_devices && h->max_commands > 32)
+		h->max_commands = 32;
+
 	if (h->max_commands < 16) {
 		dev_warn(&h->pdev->dev, "Controller reports "
 			"max supported commands of %d, an obvious lie. "
@@ -4148,7 +4168,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *h)
 		err = -ENOMEM;
 		goto err_out_free_res;
 	}
-	err = cciss_wait_for_board_ready(h);
+	err = cciss_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
 	if (err)
 		goto err_out_free_res;
 	err = cciss_find_cfgtables(h);
@@ -4313,36 +4333,6 @@ static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, u
 #define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
 #define cciss_noop(p) cciss_message(p, 3, 0)
 
-static __devinit int cciss_reset_msi(struct pci_dev *pdev)
-{
-/* the #defines are stolen from drivers/pci/msi.h. */
-#define msi_control_reg(base)		(base + PCI_MSI_FLAGS)
-#define PCI_MSIX_FLAGS_ENABLE		(1 << 15)
-
-	int pos;
-	u16 control = 0;
-
-	pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
-	if (pos) {
-		pci_read_config_word(pdev, msi_control_reg(pos), &control);
-		if (control & PCI_MSI_FLAGS_ENABLE) {
-			dev_info(&pdev->dev, "resetting MSI\n");
-			pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
-		}
-	}
-
-	pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
-	if (pos) {
-		pci_read_config_word(pdev, msi_control_reg(pos), &control);
-		if (control & PCI_MSIX_FLAGS_ENABLE) {
-			dev_info(&pdev->dev, "resetting MSI-X\n");
-			pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
-		}
-	}
-
-	return 0;
-}
-
 static int cciss_controller_hard_reset(struct pci_dev *pdev,
 	void * __iomem vaddr, bool use_doorbell)
 {
@@ -4397,17 +4387,17 @@ static int cciss_controller_hard_reset(struct pci_dev *pdev,
  * states or using the doorbell register. */
 static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
 {
-	u16 saved_config_space[32];
 	u64 cfg_offset;
 	u32 cfg_base_addr;
 	u64 cfg_base_addr_index;
 	void __iomem *vaddr;
 	unsigned long paddr;
 	u32 misc_fw_support, active_transport;
-	int rc, i;
+	int rc;
 	CfgTable_struct __iomem *cfgtable;
 	bool use_doorbell;
 	u32 board_id;
+	u16 command_register;
 
 	/* For controllers as old a the p600, this is very nearly
 	 * the same thing as
@@ -4417,14 +4407,6 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
 	 * pci_set_power_state(pci_dev, PCI_D0);
 	 * pci_restore_state(pci_dev);
 	 *
-	 * but we can't use these nice canned kernel routines on
-	 * kexec, because they also check the MSI/MSI-X state in PCI
-	 * configuration space and do the wrong thing when it is
-	 * set/cleared.  Also, the pci_save/restore_state functions
-	 * violate the ordering requirements for restoring the
-	 * configuration space from the CCISS document (see the
-	 * comment below).  So we roll our own ....
-	 *
 	 * For controllers newer than the P600, the pci power state
 	 * method of resetting doesn't work so we have another way
 	 * using the doorbell register.
@@ -4443,8 +4425,13 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
 		return -ENODEV;
 	}
 
-	for (i = 0; i < 32; i++)
-		pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+	/* Save the PCI command register */
+	pci_read_config_word(pdev, 4, &command_register);
+	/* Turn the board off.  This is so that later pci_restore_state()
+	 * won't turn the board on before the rest of config space is ready.
+	 */
+	pci_disable_device(pdev);
+	pci_save_state(pdev);
 
 	/* find the first memory BAR, so we can find the cfg table */
 	rc = cciss_pci_find_memory_BAR(pdev, &paddr);
@@ -4479,26 +4466,32 @@ static __devinit int cciss_kdump_hard_reset_controller(struct pci_dev *pdev)
 	rc = cciss_controller_hard_reset(pdev, vaddr, use_doorbell);
 	if (rc)
 		goto unmap_cfgtable;
-
-	/* Restore the PCI configuration space.  The Open CISS
-	 * Specification says, "Restore the PCI Configuration
-	 * Registers, offsets 00h through 60h. It is important to
-	 * restore the command register, 16-bits at offset 04h,
-	 * last. Do not restore the configuration status register,
-	 * 16-bits at offset 06h."  Note that the offset is 2*i.
-	 */
-	for (i = 0; i < 32; i++) {
-		if (i == 2 || i == 3)
-			continue;
-		pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+	pci_restore_state(pdev);
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "failed to enable device.\n");
+		goto unmap_cfgtable;
 	}
-	wmb();
-	pci_write_config_word(pdev, 4, saved_config_space[2]);
+	pci_write_config_word(pdev, 4, command_register);
 
 	/* Some devices (notably the HP Smart Array 5i Controller)
 	   need a little pause here */
 	msleep(CCISS_POST_RESET_PAUSE_MSECS);
 
+	/* Wait for board to become not ready, then ready. */
+	dev_info(&pdev->dev, "Waiting for board to become ready.\n");
+	rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
+	if (rc) /* Don't bail, might be E500, etc. which can't be reset */
+		dev_warn(&pdev->dev,
+			"failed waiting for board to become not ready\n");
+	rc = cciss_wait_for_board_state(pdev, vaddr, BOARD_READY);
+	if (rc) {
+		dev_warn(&pdev->dev,
+			"failed waiting for board to become ready\n");
+		goto unmap_cfgtable;
+	}
+	dev_info(&pdev->dev, "board ready.\n");
+
 	/* Controller should be in simple mode at this point.  If it's not,
 	 * It means we're on one of those controllers which doesn't support
 	 * the doorbell reset method and on which the PCI power management reset
@@ -4539,8 +4532,6 @@ static __devinit int cciss_init_reset_devices(struct pci_dev *pdev)
 		return 0; /* just try to do the kdump anyhow. */
 	if (rc)
 		return -ENODEV;
-	if (cciss_reset_msi(pdev))
-		return -ENODEV;
 
 	/* Now try to get the controller to respond to a no-op */
 	for (i = 0; i < CCISS_POST_RESET_NOOP_RETRIES; i++) {
@@ -4936,7 +4927,8 @@ static void __exit cciss_cleanup(void)
 		}
 	}
 	kthread_stop(cciss_scan_thread);
-	remove_proc_entry("driver/cciss", NULL);
+	if (proc_cciss)
+		remove_proc_entry("driver/cciss", NULL);
 	bus_unregister(&cciss_bus_type);
 }
 
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index ae340ffc8f8..4b8933d778f 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -200,10 +200,14 @@ struct ctlr_info
  * the above.
  */
 #define CCISS_BOARD_READY_WAIT_SECS (120)
+#define CCISS_BOARD_NOT_READY_WAIT_SECS (10)
 #define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
 #define CCISS_BOARD_READY_ITERATIONS \
 	((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
 		CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
+#define CCISS_BOARD_NOT_READY_ITERATIONS \
+	((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \
+		CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
 #define CCISS_POST_RESET_PAUSE_MSECS (3000)
 #define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (1000)
 #define CCISS_POST_RESET_NOOP_RETRIES (12)
diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c
index 575495f3c4b..727d0225b7d 100644
--- a/drivers/block/cciss_scsi.c
+++ b/drivers/block/cciss_scsi.c
@@ -62,8 +62,8 @@ static int cciss_scsi_proc_info(
 		int length, 	   /* length of data in buffer */
 		int func);	   /* 0 == read, 1 == write */
 
-static int cciss_scsi_queue_command (struct scsi_cmnd *cmd,
-		void (* done)(struct scsi_cmnd *));
+static int cciss_scsi_queue_command (struct Scsi_Host *h,
+				     struct scsi_cmnd *cmd);
 static int cciss_eh_device_reset_handler(struct scsi_cmnd *);
 static int cciss_eh_abort_handler(struct scsi_cmnd *);
 
@@ -1406,7 +1406,7 @@ static void cciss_scatter_gather(ctlr_info_t *h, CommandList_struct *c,
 
 
 static int
-cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+cciss_scsi_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	ctlr_info_t *h;
 	int rc;
@@ -1504,6 +1504,8 @@ cciss_scsi_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd
 	return 0;
 }
 
+static DEF_SCSI_QCMD(cciss_scsi_queue_command)
+
 static void cciss_unregister_scsi(ctlr_info_t *h)
 {
 	struct cciss_scsi_adapter_data_t *sa;
diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c
index ac04ef97eac..ba95cba192b 100644
--- a/drivers/block/drbd/drbd_actlog.c
+++ b/drivers/block/drbd/drbd_actlog.c
@@ -78,11 +78,10 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
 	init_completion(&md_io.event);
 	md_io.error = 0;
 
-	if ((rw & WRITE) && !test_bit(MD_NO_BARRIER, &mdev->flags))
-		rw |= REQ_HARDBARRIER;
+	if ((rw & WRITE) && !test_bit(MD_NO_FUA, &mdev->flags))
+		rw |= REQ_FUA;
 	rw |= REQ_UNPLUG | REQ_SYNC;
 
- retry:
 	bio = bio_alloc(GFP_NOIO, 1);
 	bio->bi_bdev = bdev->md_bdev;
 	bio->bi_sector = sector;
@@ -100,17 +99,6 @@ static int _drbd_md_sync_page_io(struct drbd_conf *mdev,
 	wait_for_completion(&md_io.event);
 	ok = bio_flagged(bio, BIO_UPTODATE) && md_io.error == 0;
 
-	/* check for unsupported barrier op.
-	 * would rather check on EOPNOTSUPP, but that is not reliable.
-	 * don't try again for ANY return value != 0 */
-	if (unlikely((bio->bi_rw & REQ_HARDBARRIER) && !ok)) {
-		/* Try again with no barrier */
-		dev_warn(DEV, "Barriers not supported on meta data device - disabling\n");
-		set_bit(MD_NO_BARRIER, &mdev->flags);
-		rw &= ~REQ_HARDBARRIER;
-		bio_put(bio);
-		goto retry;
-	}
  out:
 	bio_put(bio);
 	return ok;
@@ -284,18 +272,32 @@ w_al_write_transaction(struct drbd_conf *mdev, struct drbd_work *w, int unused)
 	u32 xor_sum = 0;
 
 	if (!get_ldev(mdev)) {
-		dev_err(DEV, "get_ldev() failed in w_al_write_transaction\n");
+		dev_err(DEV,
+			"disk is %s, cannot start al transaction (-%d +%d)\n",
+			drbd_disk_str(mdev->state.disk), evicted, new_enr);
 		complete(&((struct update_al_work *)w)->event);
 		return 1;
 	}
 	/* do we have to do a bitmap write, first?
 	 * TODO reduce maximum latency:
 	 * submit both bios, then wait for both,
-	 * instead of doing two synchronous sector writes. */
+	 * instead of doing two synchronous sector writes.
+	 * For now, we must not write the transaction,
+	 * if we cannot write out the bitmap of the evicted extent. */
 	if (mdev->state.conn < C_CONNECTED && evicted != LC_FREE)
 		drbd_bm_write_sect(mdev, evicted/AL_EXT_PER_BM_SECT);
 
-	mutex_lock(&mdev->md_io_mutex); /* protects md_io_page, al_tr_cycle, ... */
+	/* The bitmap write may have failed, causing a state change. */
+	if (mdev->state.disk < D_INCONSISTENT) {
+		dev_err(DEV,
+			"disk is %s, cannot write al transaction (-%d +%d)\n",
+			drbd_disk_str(mdev->state.disk), evicted, new_enr);
+		complete(&((struct update_al_work *)w)->event);
+		put_ldev(mdev);
+		return 1;
+	}
+
+	mutex_lock(&mdev->md_io_mutex); /* protects md_io_buffer, al_tr_cycle, ... */
 	buffer = (struct al_transaction *)page_address(mdev->md_io_page);
 
 	buffer->magic = __constant_cpu_to_be32(DRBD_MAGIC);
@@ -739,7 +741,7 @@ void drbd_al_apply_to_bm(struct drbd_conf *mdev)
 	unsigned int enr;
 	unsigned long add = 0;
 	char ppb[10];
-	int i;
+	int i, tmp;
 
 	wait_event(mdev->al_wait, lc_try_lock(mdev->act_log));
 
@@ -747,7 +749,9 @@ void drbd_al_apply_to_bm(struct drbd_conf *mdev)
 		enr = lc_element_by_index(mdev->act_log, i)->lc_number;
 		if (enr == LC_FREE)
 			continue;
-		add += drbd_bm_ALe_set_all(mdev, enr);
+		tmp = drbd_bm_ALe_set_all(mdev, enr);
+		dynamic_dev_dbg(DEV, "AL: set %d bits in extent %u\n", tmp, enr);
+		add += tmp;
 	}
 
 	lc_unlock(mdev->act_log);
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 9bdcf4393c0..1ea1a34e78b 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -114,11 +114,11 @@ struct drbd_conf;
 #define D_ASSERT(exp)	if (!(exp)) \
 	 dev_err(DEV, "ASSERT( " #exp " ) in %s:%d\n", __FILE__, __LINE__)
 
-#define ERR_IF(exp) if (({				\
-	int _b = (exp) != 0;				\
-	if (_b) dev_err(DEV, "%s: (%s) in %s:%d\n",	\
-		__func__, #exp, __FILE__, __LINE__);	\
-	 _b;						\
+#define ERR_IF(exp) if (({						\
+	int _b = (exp) != 0;						\
+	if (_b) dev_err(DEV, "ASSERT FAILED: %s: (%s) in %s:%d\n",	\
+			__func__, #exp, __FILE__, __LINE__);		\
+	_b;								\
 	}))
 
 /* Defines to control fault insertion */
@@ -749,17 +749,12 @@ struct drbd_epoch {
 
 /* drbd_epoch flag bits */
 enum {
-	DE_BARRIER_IN_NEXT_EPOCH_ISSUED,
-	DE_BARRIER_IN_NEXT_EPOCH_DONE,
-	DE_CONTAINS_A_BARRIER,
 	DE_HAVE_BARRIER_NUMBER,
-	DE_IS_FINISHING,
 };
 
 enum epoch_event {
 	EV_PUT,
 	EV_GOT_BARRIER_NR,
-	EV_BARRIER_DONE,
 	EV_BECAME_LAST,
 	EV_CLEANUP = 32, /* used as flag */
 };
@@ -801,11 +796,6 @@ enum {
 	__EE_CALL_AL_COMPLETE_IO,
 	__EE_MAY_SET_IN_SYNC,
 
-	/* This epoch entry closes an epoch using a barrier.
-	 * On sucessful completion, the epoch is released,
-	 * and the P_BARRIER_ACK send. */
-	__EE_IS_BARRIER,
-
 	/* In case a barrier failed,
 	 * we need to resubmit without the barrier flag. */
 	__EE_RESUBMITTED,
@@ -820,7 +810,6 @@ enum {
 };
 #define EE_CALL_AL_COMPLETE_IO (1<<__EE_CALL_AL_COMPLETE_IO)
 #define EE_MAY_SET_IN_SYNC     (1<<__EE_MAY_SET_IN_SYNC)
-#define EE_IS_BARRIER          (1<<__EE_IS_BARRIER)
 #define	EE_RESUBMITTED         (1<<__EE_RESUBMITTED)
 #define EE_WAS_ERROR           (1<<__EE_WAS_ERROR)
 #define EE_HAS_DIGEST          (1<<__EE_HAS_DIGEST)
@@ -843,16 +832,15 @@ enum {
 				 * Gets cleared when the state.conn
 				 * goes into C_CONNECTED state. */
 	WRITE_BM_AFTER_RESYNC,	/* A kmalloc() during resync failed */
-	NO_BARRIER_SUPP,	/* underlying block device doesn't implement barriers */
 	CONSIDER_RESYNC,
 
-	MD_NO_BARRIER,		/* meta data device does not support barriers,
-				   so don't even try */
+	MD_NO_FUA,		/* Users wants us to not use FUA/FLUSH on meta data dev */
 	SUSPEND_IO,		/* suspend application io */
 	BITMAP_IO,		/* suspend application io;
 				   once no more io in flight, start bitmap io */
 	BITMAP_IO_QUEUED,       /* Started bitmap IO */
-	GO_DISKLESS,		/* Disk failed, local_cnt reached zero, we are going diskless */
+	GO_DISKLESS,		/* Disk is being detached, on io-error or admin request. */
+	WAS_IO_ERROR,		/* Local disk failed returned IO error */
 	RESYNC_AFTER_NEG,       /* Resync after online grow after the attach&negotiate finished. */
 	NET_CONGESTED,		/* The data socket is congested */
 
@@ -947,7 +935,6 @@ enum write_ordering_e {
 	WO_none,
 	WO_drain_io,
 	WO_bdev_flush,
-	WO_bio_barrier
 };
 
 struct fifo_buffer {
@@ -1281,6 +1268,7 @@ extern int drbd_bmio_set_n_write(struct drbd_conf *mdev);
 extern int drbd_bmio_clear_n_write(struct drbd_conf *mdev);
 extern int drbd_bitmap_io(struct drbd_conf *mdev, int (*io_fn)(struct drbd_conf *), char *why);
 extern void drbd_go_diskless(struct drbd_conf *mdev);
+extern void drbd_ldev_destroy(struct drbd_conf *mdev);
 
 
 /* Meta data layout
@@ -1798,17 +1786,17 @@ static inline void __drbd_chk_io_error_(struct drbd_conf *mdev, int forcedetach,
 	case EP_PASS_ON:
 		if (!forcedetach) {
 			if (__ratelimit(&drbd_ratelimit_state))
-				dev_err(DEV, "Local IO failed in %s."
-					     "Passing error on...\n", where);
+				dev_err(DEV, "Local IO failed in %s.\n", where);
 			break;
 		}
 		/* NOTE fall through to detach case if forcedetach set */
 	case EP_DETACH:
 	case EP_CALL_HELPER:
+		set_bit(WAS_IO_ERROR, &mdev->flags);
 		if (mdev->state.disk > D_FAILED) {
 			_drbd_set_state(_NS(mdev, disk, D_FAILED), CS_HARD, NULL);
-			dev_err(DEV, "Local IO failed in %s."
-				     "Detaching...\n", where);
+			dev_err(DEV,
+				"Local IO failed in %s. Detaching...\n", where);
 		}
 		break;
 	}
@@ -1874,7 +1862,7 @@ static inline sector_t drbd_md_last_sector(struct drbd_backing_dev *bdev)
 static inline sector_t drbd_get_capacity(struct block_device *bdev)
 {
 	/* return bdev ? get_capacity(bdev->bd_disk) : 0; */
-	return bdev ? bdev->bd_inode->i_size >> 9 : 0;
+	return bdev ? i_size_read(bdev->bd_inode) >> 9 : 0;
 }
 
 /**
@@ -2127,7 +2115,11 @@ static inline void put_ldev(struct drbd_conf *mdev)
 	__release(local);
 	D_ASSERT(i >= 0);
 	if (i == 0) {
+		if (mdev->state.disk == D_DISKLESS)
+			/* even internal references gone, safe to destroy */
+			drbd_ldev_destroy(mdev);
 		if (mdev->state.disk == D_FAILED)
+			/* all application IO references gone. */
 			drbd_go_diskless(mdev);
 		wake_up(&mdev->misc_wait);
 	}
@@ -2138,6 +2130,10 @@ static inline int _get_ldev_if_state(struct drbd_conf *mdev, enum drbd_disk_stat
 {
 	int io_allowed;
 
+	/* never get a reference while D_DISKLESS */
+	if (mdev->state.disk == D_DISKLESS)
+		return 0;
+
 	atomic_inc(&mdev->local_cnt);
 	io_allowed = (mdev->state.disk >= mins);
 	if (!io_allowed)
@@ -2406,12 +2402,12 @@ static inline void drbd_md_flush(struct drbd_conf *mdev)
 {
 	int r;
 
-	if (test_bit(MD_NO_BARRIER, &mdev->flags))
+	if (test_bit(MD_NO_FUA, &mdev->flags))
 		return;
 
 	r = blkdev_issue_flush(mdev->ldev->md_bdev, GFP_KERNEL, NULL);
 	if (r) {
-		set_bit(MD_NO_BARRIER, &mdev->flags);
+		set_bit(MD_NO_FUA, &mdev->flags);
 		dev_err(DEV, "meta data flush failed with status %d, disabling md-flushes\n", r);
 	}
 }
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index 25c7a73c506..6be5401d0e8 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -835,6 +835,15 @@ static union drbd_state sanitize_state(struct drbd_conf *mdev, union drbd_state
 	    ns.conn != C_UNCONNECTED && ns.conn != C_DISCONNECTING && ns.conn <= C_TEAR_DOWN)
 		ns.conn = os.conn;
 
+	/* we cannot fail (again) if we already detached */
+	if (ns.disk == D_FAILED && os.disk == D_DISKLESS)
+		ns.disk = D_DISKLESS;
+
+	/* if we are only D_ATTACHING yet,
+	 * we can (and should) go directly to D_DISKLESS. */
+	if (ns.disk == D_FAILED && os.disk == D_ATTACHING)
+		ns.disk = D_DISKLESS;
+
 	/* After C_DISCONNECTING only C_STANDALONE may follow */
 	if (os.conn == C_DISCONNECTING && ns.conn != C_STANDALONE)
 		ns.conn = os.conn;
@@ -1056,7 +1065,15 @@ int __drbd_set_state(struct drbd_conf *mdev,
 	    !test_and_set_bit(CONFIG_PENDING, &mdev->flags))
 		set_bit(DEVICE_DYING, &mdev->flags);
 
-	mdev->state.i = ns.i;
+	/* if we are going -> D_FAILED or D_DISKLESS, grab one extra reference
+	 * on the ldev here, to be sure the transition -> D_DISKLESS resp.
+	 * drbd_ldev_destroy() won't happen before our corresponding
+	 * after_state_ch works run, where we put_ldev again. */
+	if ((os.disk != D_FAILED && ns.disk == D_FAILED) ||
+	    (os.disk != D_DISKLESS && ns.disk == D_DISKLESS))
+		atomic_inc(&mdev->local_cnt);
+
+	mdev->state = ns;
 	wake_up(&mdev->misc_wait);
 	wake_up(&mdev->state_wait);
 
@@ -1268,7 +1285,6 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
 			if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
 				drbd_uuid_new_current(mdev);
 				clear_bit(NEW_CUR_UUID, &mdev->flags);
-				drbd_md_sync(mdev);
 			}
 			spin_lock_irq(&mdev->req_lock);
 			_drbd_set_state(_NS(mdev, susp_fen, 0), CS_VERBOSE, NULL);
@@ -1365,63 +1381,64 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
 	    os.disk > D_INCONSISTENT && ns.disk == D_INCONSISTENT)
 		drbd_queue_bitmap_io(mdev, &drbd_bmio_set_n_write, NULL, "set_n_write from invalidate");
 
-	/* first half of local IO error */
-	if (os.disk > D_FAILED && ns.disk == D_FAILED) {
-		enum drbd_io_error_p eh = EP_PASS_ON;
+	/* first half of local IO error, failure to attach,
+	 * or administrative detach */
+	if (os.disk != D_FAILED && ns.disk == D_FAILED) {
+		enum drbd_io_error_p eh;
+		int was_io_error;
+		/* corresponding get_ldev was in __drbd_set_state, to serialize
+		 * our cleanup here with the transition to D_DISKLESS,
+		 * so it is safe to dreference ldev here. */
+		eh = mdev->ldev->dc.on_io_error;
+		was_io_error = test_and_clear_bit(WAS_IO_ERROR, &mdev->flags);
+
+		/* current state still has to be D_FAILED,
+		 * there is only one way out: to D_DISKLESS,
+		 * and that may only happen after our put_ldev below. */
+		if (mdev->state.disk != D_FAILED)
+			dev_err(DEV,
+				"ASSERT FAILED: disk is %s during detach\n",
+				drbd_disk_str(mdev->state.disk));
 
 		if (drbd_send_state(mdev))
-			dev_warn(DEV, "Notified peer that my disk is broken.\n");
+			dev_warn(DEV, "Notified peer that I am detaching my disk\n");
 		else
-			dev_err(DEV, "Sending state for drbd_io_error() failed\n");
+			dev_err(DEV, "Sending state for detaching disk failed\n");
 
 		drbd_rs_cancel_all(mdev);
 
-		if (get_ldev_if_state(mdev, D_FAILED)) {
-			eh = mdev->ldev->dc.on_io_error;
-			put_ldev(mdev);
-		}
-		if (eh == EP_CALL_HELPER)
+		/* In case we want to get something to stable storage still,
+		 * this may be the last chance.
+		 * Following put_ldev may transition to D_DISKLESS. */
+		drbd_md_sync(mdev);
+		put_ldev(mdev);
+
+		if (was_io_error && eh == EP_CALL_HELPER)
 			drbd_khelper(mdev, "local-io-error");
 	}
 
+        /* second half of local IO error, failure to attach,
+         * or administrative detach,
+         * after local_cnt references have reached zero again */
+        if (os.disk != D_DISKLESS && ns.disk == D_DISKLESS) {
+                /* We must still be diskless,
+                 * re-attach has to be serialized with this! */
+                if (mdev->state.disk != D_DISKLESS)
+                        dev_err(DEV,
+                                "ASSERT FAILED: disk is %s while going diskless\n",
+                                drbd_disk_str(mdev->state.disk));
 
-	/* second half of local IO error handling,
-	 * after local_cnt references have reached zero: */
-	if (os.disk == D_FAILED && ns.disk == D_DISKLESS) {
-		mdev->rs_total = 0;
-		mdev->rs_failed = 0;
-		atomic_set(&mdev->rs_pending_cnt, 0);
-	}
-
-	if (os.disk > D_DISKLESS && ns.disk == D_DISKLESS) {
-		/* We must still be diskless,
-		 * re-attach has to be serialized with this! */
-		if (mdev->state.disk != D_DISKLESS)
-			dev_err(DEV,
-				"ASSERT FAILED: disk is %s while going diskless\n",
-				drbd_disk_str(mdev->state.disk));
+                mdev->rs_total = 0;
+                mdev->rs_failed = 0;
+                atomic_set(&mdev->rs_pending_cnt, 0);
 
-		/* we cannot assert local_cnt == 0 here, as get_ldev_if_state
-		 * will inc/dec it frequently. Since we became D_DISKLESS, no
-		 * one has touched the protected members anymore, though, so we
-		 * are safe to free them here. */
 		if (drbd_send_state(mdev))
-			dev_warn(DEV, "Notified peer that I detached my disk.\n");
+			dev_warn(DEV, "Notified peer that I'm now diskless.\n");
 		else
-			dev_err(DEV, "Sending state for detach failed\n");
-
-		lc_destroy(mdev->resync);
-		mdev->resync = NULL;
-		lc_destroy(mdev->act_log);
-		mdev->act_log = NULL;
-		__no_warn(local,
-			drbd_free_bc(mdev->ldev);
-			mdev->ldev = NULL;);
-
-		if (mdev->md_io_tmpp) {
-			__free_page(mdev->md_io_tmpp);
-			mdev->md_io_tmpp = NULL;
-		}
+			dev_err(DEV, "Sending state for being diskless failed\n");
+		/* corresponding get_ldev in __drbd_set_state
+		 * this may finaly trigger drbd_ldev_destroy. */
+		put_ldev(mdev);
 	}
 
 	/* Disks got bigger while they were detached */
@@ -2772,11 +2789,6 @@ void drbd_init_set_defaults(struct drbd_conf *mdev)
 
 	drbd_set_defaults(mdev);
 
-	/* for now, we do NOT yet support it,
-	 * even though we start some framework
-	 * to eventually support barriers */
-	set_bit(NO_BARRIER_SUPP, &mdev->flags);
-
 	atomic_set(&mdev->ap_bio_cnt, 0);
 	atomic_set(&mdev->ap_pending_cnt, 0);
 	atomic_set(&mdev->rs_pending_cnt, 0);
@@ -2842,7 +2854,7 @@ void drbd_init_set_defaults(struct drbd_conf *mdev)
 	drbd_thread_init(mdev, &mdev->asender, drbd_asender);
 
 	mdev->agreed_pro_version = PRO_VERSION_MAX;
-	mdev->write_ordering = WO_bio_barrier;
+	mdev->write_ordering = WO_bdev_flush;
 	mdev->resync_wenr = LC_FREE;
 }
 
@@ -2899,7 +2911,6 @@ void drbd_mdev_cleanup(struct drbd_conf *mdev)
 	D_ASSERT(list_empty(&mdev->resync_work.list));
 	D_ASSERT(list_empty(&mdev->unplug_work.list));
 	D_ASSERT(list_empty(&mdev->go_diskless.list));
-
 }
 
 
@@ -3660,6 +3671,8 @@ void drbd_uuid_new_current(struct drbd_conf *mdev) __must_hold(local)
 
 	get_random_bytes(&val, sizeof(u64));
 	_drbd_uuid_set(mdev, UI_CURRENT, val);
+	/* get it to stable storage _now_ */
+	drbd_md_sync(mdev);
 }
 
 void drbd_uuid_set_bm(struct drbd_conf *mdev, u64 val) __must_hold(local)
@@ -3756,19 +3769,31 @@ static int w_bitmap_io(struct drbd_conf *mdev, struct drbd_work *w, int unused)
 	return 1;
 }
 
+void drbd_ldev_destroy(struct drbd_conf *mdev)
+{
+	lc_destroy(mdev->resync);
+	mdev->resync = NULL;
+	lc_destroy(mdev->act_log);
+	mdev->act_log = NULL;
+	__no_warn(local,
+		drbd_free_bc(mdev->ldev);
+		mdev->ldev = NULL;);
+
+	if (mdev->md_io_tmpp) {
+		__free_page(mdev->md_io_tmpp);
+		mdev->md_io_tmpp = NULL;
+	}
+	clear_bit(GO_DISKLESS, &mdev->flags);
+}
+
 static int w_go_diskless(struct drbd_conf *mdev, struct drbd_work *w, int unused)
 {
 	D_ASSERT(mdev->state.disk == D_FAILED);
 	/* we cannot assert local_cnt == 0 here, as get_ldev_if_state will
 	 * inc/dec it frequently. Once we are D_DISKLESS, no one will touch
-	 * the protected members anymore, though, so in the after_state_ch work
-	 * it will be safe to free them. */
+	 * the protected members anymore, though, so once put_ldev reaches zero
+	 * again, it will be safe to free them. */
 	drbd_force_state(mdev, NS(disk, D_DISKLESS));
-	/* We need to wait for return of references checked out while we still
-	 * have been D_FAILED, though (drbd_md_sync, bitmap io). */
-	wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
-
-	clear_bit(GO_DISKLESS, &mdev->flags);
 	return 1;
 }
 
@@ -3777,9 +3802,6 @@ void drbd_go_diskless(struct drbd_conf *mdev)
 	D_ASSERT(mdev->state.disk == D_FAILED);
 	if (!test_and_set_bit(GO_DISKLESS, &mdev->flags))
 		drbd_queue_work(&mdev->data.work, &mdev->go_diskless);
-		/* don't drbd_queue_work_front,
-		 * we need to serialize with the after_state_ch work
-		 * of the -> D_FAILED transition. */
 }
 
 /**
diff --git a/drivers/block/drbd/drbd_nl.c b/drivers/block/drbd/drbd_nl.c
index 87925e97e61..29e5c70e4e2 100644
--- a/drivers/block/drbd/drbd_nl.c
+++ b/drivers/block/drbd/drbd_nl.c
@@ -870,6 +870,11 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 		retcode = ERR_DISK_CONFIGURED;
 		goto fail;
 	}
+	/* It may just now have detached because of IO error.  Make sure
+	 * drbd_ldev_destroy is done already, we may end up here very fast,
+	 * e.g. if someone calls attach from the on-io-error handler,
+	 * to realize a "hot spare" feature (not that I'd recommend that) */
+	wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
 
 	/* allocation not in the IO path, cqueue thread context */
 	nbc = kzalloc(sizeof(struct drbd_backing_dev), GFP_KERNEL);
@@ -1098,9 +1103,9 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 	/* Reset the "barriers don't work" bits here, then force meta data to
 	 * be written, to ensure we determine if barriers are supported. */
 	if (nbc->dc.no_md_flush)
-		set_bit(MD_NO_BARRIER, &mdev->flags);
+		set_bit(MD_NO_FUA, &mdev->flags);
 	else
-		clear_bit(MD_NO_BARRIER, &mdev->flags);
+		clear_bit(MD_NO_FUA, &mdev->flags);
 
 	/* Point of no return reached.
 	 * Devices and memory are no longer released by error cleanup below.
@@ -1112,8 +1117,8 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 	nbc = NULL;
 	resync_lru = NULL;
 
-	mdev->write_ordering = WO_bio_barrier;
-	drbd_bump_write_ordering(mdev, WO_bio_barrier);
+	mdev->write_ordering = WO_bdev_flush;
+	drbd_bump_write_ordering(mdev, WO_bdev_flush);
 
 	if (drbd_md_test_flag(mdev->ldev, MDF_CRASHED_PRIMARY))
 		set_bit(CRASHED_PRIMARY, &mdev->flags);
@@ -1262,7 +1267,7 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
  force_diskless_dec:
 	put_ldev(mdev);
  force_diskless:
-	drbd_force_state(mdev, NS(disk, D_DISKLESS));
+	drbd_force_state(mdev, NS(disk, D_FAILED));
 	drbd_md_sync(mdev);
  release_bdev2_fail:
 	if (nbc)
@@ -1285,10 +1290,19 @@ static int drbd_nl_disk_conf(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 	return 0;
 }
 
+/* Detaching the disk is a process in multiple stages.  First we need to lock
+ * out application IO, in-flight IO, IO stuck in drbd_al_begin_io.
+ * Then we transition to D_DISKLESS, and wait for put_ldev() to return all
+ * internal references as well.
+ * Only then we have finally detached. */
 static int drbd_nl_detach(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp,
 			  struct drbd_nl_cfg_reply *reply)
 {
+	drbd_suspend_io(mdev); /* so no-one is stuck in drbd_al_begin_io */
 	reply->ret_code = drbd_request_state(mdev, NS(disk, D_DISKLESS));
+	if (mdev->state.disk == D_DISKLESS)
+		wait_event(mdev->misc_wait, !atomic_read(&mdev->local_cnt));
+	drbd_resume_io(mdev);
 	return 0;
 }
 
@@ -1953,7 +1967,6 @@ static int drbd_nl_resume_io(struct drbd_conf *mdev, struct drbd_nl_cfg_req *nlp
 	if (test_bit(NEW_CUR_UUID, &mdev->flags)) {
 		drbd_uuid_new_current(mdev);
 		clear_bit(NEW_CUR_UUID, &mdev->flags);
-		drbd_md_sync(mdev);
 	}
 	drbd_suspend_io(mdev);
 	reply->ret_code = drbd_request_state(mdev, NS3(susp, 0, susp_nod, 0, susp_fen, 0));
diff --git a/drivers/block/drbd/drbd_proc.c b/drivers/block/drbd/drbd_proc.c
index ad325c5d0ce..7e6ac307e2d 100644
--- a/drivers/block/drbd/drbd_proc.c
+++ b/drivers/block/drbd/drbd_proc.c
@@ -158,7 +158,6 @@ static int drbd_seq_show(struct seq_file *seq, void *v)
 		[WO_none] = 'n',
 		[WO_drain_io] = 'd',
 		[WO_bdev_flush] = 'f',
-		[WO_bio_barrier] = 'b',
 	};
 
 	seq_printf(seq, "version: " REL_VERSION " (api:%d/proto:%d-%d)\n%s\n",
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index efd6169acf2..24487d4fb20 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -36,7 +36,6 @@
 #include <linux/memcontrol.h>
 #include <linux/mm_inline.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/pkt_sched.h>
 #define __KERNEL_SYSCALLS__
 #include <linux/unistd.h>
@@ -49,11 +48,6 @@
 
 #include "drbd_vli.h"
 
-struct flush_work {
-	struct drbd_work w;
-	struct drbd_epoch *epoch;
-};
-
 enum finish_epoch {
 	FE_STILL_LIVE,
 	FE_DESTROYED,
@@ -66,16 +60,6 @@ static int drbd_do_auth(struct drbd_conf *mdev);
 static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *, struct drbd_epoch *, enum epoch_event);
 static int e_end_block(struct drbd_conf *, struct drbd_work *, int);
 
-static struct drbd_epoch *previous_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
-{
-	struct drbd_epoch *prev;
-	spin_lock(&mdev->epoch_lock);
-	prev = list_entry(epoch->list.prev, struct drbd_epoch, list);
-	if (prev == epoch || prev == mdev->current_epoch)
-		prev = NULL;
-	spin_unlock(&mdev->epoch_lock);
-	return prev;
-}
 
 #define GFP_TRY	(__GFP_HIGHMEM | __GFP_NOWARN)
 
@@ -981,7 +965,7 @@ static int drbd_recv_header(struct drbd_conf *mdev, enum drbd_packets *cmd, unsi
 	return TRUE;
 }
 
-static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct drbd_epoch *epoch)
+static void drbd_flush(struct drbd_conf *mdev)
 {
 	int rv;
 
@@ -997,24 +981,6 @@ static enum finish_epoch drbd_flush_after_epoch(struct drbd_conf *mdev, struct d
 		}
 		put_ldev(mdev);
 	}
-
-	return drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
-}
-
-static int w_flush(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
-{
-	struct flush_work *fw = (struct flush_work *)w;
-	struct drbd_epoch *epoch = fw->epoch;
-
-	kfree(w);
-
-	if (!test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags))
-		drbd_flush_after_epoch(mdev, epoch);
-
-	drbd_may_finish_epoch(mdev, epoch, EV_PUT |
-			      (mdev->state.conn < C_CONNECTED ? EV_CLEANUP : 0));
-
-	return 1;
 }
 
 /**
@@ -1027,15 +993,13 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
 					       struct drbd_epoch *epoch,
 					       enum epoch_event ev)
 {
-	int finish, epoch_size;
+	int epoch_size;
 	struct drbd_epoch *next_epoch;
-	int schedule_flush = 0;
 	enum finish_epoch rv = FE_STILL_LIVE;
 
 	spin_lock(&mdev->epoch_lock);
 	do {
 		next_epoch = NULL;
-		finish = 0;
 
 		epoch_size = atomic_read(&epoch->epoch_size);
 
@@ -1045,16 +1009,6 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
 			break;
 		case EV_GOT_BARRIER_NR:
 			set_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags);
-
-			/* Special case: If we just switched from WO_bio_barrier to
-			   WO_bdev_flush we should not finish the current epoch */
-			if (test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags) && epoch_size == 1 &&
-			    mdev->write_ordering != WO_bio_barrier &&
-			    epoch == mdev->current_epoch)
-				clear_bit(DE_CONTAINS_A_BARRIER, &epoch->flags);
-			break;
-		case EV_BARRIER_DONE:
-			set_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags);
 			break;
 		case EV_BECAME_LAST:
 			/* nothing to do*/
@@ -1063,23 +1017,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
 
 		if (epoch_size != 0 &&
 		    atomic_read(&epoch->active) == 0 &&
-		    test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags) &&
-		    epoch->list.prev == &mdev->current_epoch->list &&
-		    !test_bit(DE_IS_FINISHING, &epoch->flags)) {
-			/* Nearly all conditions are met to finish that epoch... */
-			if (test_bit(DE_BARRIER_IN_NEXT_EPOCH_DONE, &epoch->flags) ||
-			    mdev->write_ordering == WO_none ||
-			    (epoch_size == 1 && test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) ||
-			    ev & EV_CLEANUP) {
-				finish = 1;
-				set_bit(DE_IS_FINISHING, &epoch->flags);
-			} else if (!test_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags) &&
-				 mdev->write_ordering == WO_bio_barrier) {
-				atomic_inc(&epoch->active);
-				schedule_flush = 1;
-			}
-		}
-		if (finish) {
+		    test_bit(DE_HAVE_BARRIER_NUMBER, &epoch->flags)) {
 			if (!(ev & EV_CLEANUP)) {
 				spin_unlock(&mdev->epoch_lock);
 				drbd_send_b_ack(mdev, epoch->barrier_nr, epoch_size);
@@ -1102,6 +1040,7 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
 				/* atomic_set(&epoch->active, 0); is already zero */
 				if (rv == FE_STILL_LIVE)
 					rv = FE_RECYCLED;
+				wake_up(&mdev->ee_wait);
 			}
 		}
 
@@ -1113,22 +1052,6 @@ static enum finish_epoch drbd_may_finish_epoch(struct drbd_conf *mdev,
 
 	spin_unlock(&mdev->epoch_lock);
 
-	if (schedule_flush) {
-		struct flush_work *fw;
-		fw = kmalloc(sizeof(*fw), GFP_ATOMIC);
-		if (fw) {
-			fw->w.cb = w_flush;
-			fw->epoch = epoch;
-			drbd_queue_work(&mdev->data.work, &fw->w);
-		} else {
-			dev_warn(DEV, "Could not kmalloc a flush_work obj\n");
-			set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
-			/* That is not a recursion, only one level */
-			drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE);
-			drbd_may_finish_epoch(mdev, epoch, EV_PUT);
-		}
-	}
-
 	return rv;
 }
 
@@ -1144,19 +1067,16 @@ void drbd_bump_write_ordering(struct drbd_conf *mdev, enum write_ordering_e wo)
 		[WO_none] = "none",
 		[WO_drain_io] = "drain",
 		[WO_bdev_flush] = "flush",
-		[WO_bio_barrier] = "barrier",
 	};
 
 	pwo = mdev->write_ordering;
 	wo = min(pwo, wo);
-	if (wo == WO_bio_barrier && mdev->ldev->dc.no_disk_barrier)
-		wo = WO_bdev_flush;
 	if (wo == WO_bdev_flush && mdev->ldev->dc.no_disk_flush)
 		wo = WO_drain_io;
 	if (wo == WO_drain_io && mdev->ldev->dc.no_disk_drain)
 		wo = WO_none;
 	mdev->write_ordering = wo;
-	if (pwo != mdev->write_ordering || wo == WO_bio_barrier)
+	if (pwo != mdev->write_ordering || wo == WO_bdev_flush)
 		dev_info(DEV, "Method to ensure write ordering: %s\n", write_ordering_str[mdev->write_ordering]);
 }
 
@@ -1192,7 +1112,7 @@ next_bio:
 	bio->bi_sector = sector;
 	bio->bi_bdev = mdev->ldev->backing_bdev;
 	/* we special case some flags in the multi-bio case, see below
-	 * (REQ_UNPLUG, REQ_HARDBARRIER) */
+	 * (REQ_UNPLUG) */
 	bio->bi_rw = rw;
 	bio->bi_private = e;
 	bio->bi_end_io = drbd_endio_sec;
@@ -1226,11 +1146,6 @@ next_bio:
 			bio->bi_rw &= ~REQ_UNPLUG;
 
 		drbd_generic_make_request(mdev, fault_type, bio);
-
-		/* strip off REQ_HARDBARRIER,
-		 * unless it is the first or last bio */
-		if (bios && bios->bi_next)
-			bios->bi_rw &= ~REQ_HARDBARRIER;
 	} while (bios);
 	maybe_kick_lo(mdev);
 	return 0;
@@ -1244,45 +1159,9 @@ fail:
 	return -ENOMEM;
 }
 
-/**
- * w_e_reissue() - Worker callback; Resubmit a bio, without REQ_HARDBARRIER set
- * @mdev:	DRBD device.
- * @w:		work object.
- * @cancel:	The connection will be closed anyways (unused in this callback)
- */
-int w_e_reissue(struct drbd_conf *mdev, struct drbd_work *w, int cancel) __releases(local)
-{
-	struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
-	/* We leave DE_CONTAINS_A_BARRIER and EE_IS_BARRIER in place,
-	   (and DE_BARRIER_IN_NEXT_EPOCH_ISSUED in the previous Epoch)
-	   so that we can finish that epoch in drbd_may_finish_epoch().
-	   That is necessary if we already have a long chain of Epochs, before
-	   we realize that REQ_HARDBARRIER is actually not supported */
-
-	/* As long as the -ENOTSUPP on the barrier is reported immediately
-	   that will never trigger. If it is reported late, we will just
-	   print that warning and continue correctly for all future requests
-	   with WO_bdev_flush */
-	if (previous_epoch(mdev, e->epoch))
-		dev_warn(DEV, "Write ordering was not enforced (one time event)\n");
-
-	/* we still have a local reference,
-	 * get_ldev was done in receive_Data. */
-
-	e->w.cb = e_end_block;
-	if (drbd_submit_ee(mdev, e, WRITE, DRBD_FAULT_DT_WR) != 0) {
-		/* drbd_submit_ee fails for one reason only:
-		 * if was not able to allocate sufficient bios.
-		 * requeue, try again later. */
-		e->w.cb = w_e_reissue;
-		drbd_queue_work(&mdev->data.work, &e->w);
-	}
-	return 1;
-}
-
 static int receive_Barrier(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned int data_size)
 {
-	int rv, issue_flush;
+	int rv;
 	struct p_barrier *p = &mdev->data.rbuf.barrier;
 	struct drbd_epoch *epoch;
 
@@ -1300,44 +1179,40 @@ static int receive_Barrier(struct drbd_conf *mdev, enum drbd_packets cmd, unsign
 	 * Therefore we must send the barrier_ack after the barrier request was
 	 * completed. */
 	switch (mdev->write_ordering) {
-	case WO_bio_barrier:
 	case WO_none:
 		if (rv == FE_RECYCLED)
 			return TRUE;
-		break;
+
+		/* receiver context, in the writeout path of the other node.
+		 * avoid potential distributed deadlock */
+		epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
+		if (epoch)
+			break;
+		else
+			dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
+			/* Fall through */
 
 	case WO_bdev_flush:
 	case WO_drain_io:
-		if (rv == FE_STILL_LIVE) {
-			set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
-			drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
-			rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
-		}
-		if (rv == FE_RECYCLED)
-			return TRUE;
-
-		/* The asender will send all the ACKs and barrier ACKs out, since
-		   all EEs moved from the active_ee to the done_ee. We need to
-		   provide a new epoch object for the EEs that come in soon */
-		break;
-	}
-
-	/* receiver context, in the writeout path of the other node.
-	 * avoid potential distributed deadlock */
-	epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
-	if (!epoch) {
-		dev_warn(DEV, "Allocation of an epoch failed, slowing down\n");
-		issue_flush = !test_and_set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &mdev->current_epoch->flags);
 		drbd_wait_ee_list_empty(mdev, &mdev->active_ee);
-		if (issue_flush) {
-			rv = drbd_flush_after_epoch(mdev, mdev->current_epoch);
-			if (rv == FE_RECYCLED)
-				return TRUE;
+		drbd_flush(mdev);
+
+		if (atomic_read(&mdev->current_epoch->epoch_size)) {
+			epoch = kmalloc(sizeof(struct drbd_epoch), GFP_NOIO);
+			if (epoch)
+				break;
 		}
 
-		drbd_wait_ee_list_empty(mdev, &mdev->done_ee);
+		epoch = mdev->current_epoch;
+		wait_event(mdev->ee_wait, atomic_read(&epoch->epoch_size) == 0);
+
+		D_ASSERT(atomic_read(&epoch->active) == 0);
+		D_ASSERT(epoch->flags == 0);
 
 		return TRUE;
+	default:
+		dev_err(DEV, "Strangeness in mdev->write_ordering %d\n", mdev->write_ordering);
+		return FALSE;
 	}
 
 	epoch->flags = 0;
@@ -1652,15 +1527,8 @@ static int e_end_block(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
 {
 	struct drbd_epoch_entry *e = (struct drbd_epoch_entry *)w;
 	sector_t sector = e->sector;
-	struct drbd_epoch *epoch;
 	int ok = 1, pcmd;
 
-	if (e->flags & EE_IS_BARRIER) {
-		epoch = previous_epoch(mdev, e->epoch);
-		if (epoch)
-			drbd_may_finish_epoch(mdev, epoch, EV_BARRIER_DONE + (cancel ? EV_CLEANUP : 0));
-	}
-
 	if (mdev->net_conf->wire_protocol == DRBD_PROT_C) {
 		if (likely((e->flags & EE_WAS_ERROR) == 0)) {
 			pcmd = (mdev->state.conn >= C_SYNC_SOURCE &&
@@ -1817,27 +1685,6 @@ static int receive_Data(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned
 	e->epoch = mdev->current_epoch;
 	atomic_inc(&e->epoch->epoch_size);
 	atomic_inc(&e->epoch->active);
-
-	if (mdev->write_ordering == WO_bio_barrier && atomic_read(&e->epoch->epoch_size) == 1) {
-		struct drbd_epoch *epoch;
-		/* Issue a barrier if we start a new epoch, and the previous epoch
-		   was not a epoch containing a single request which already was
-		   a Barrier. */
-		epoch = list_entry(e->epoch->list.prev, struct drbd_epoch, list);
-		if (epoch == e->epoch) {
-			set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
-			rw |= REQ_HARDBARRIER;
-			e->flags |= EE_IS_BARRIER;
-		} else {
-			if (atomic_read(&epoch->epoch_size) > 1 ||
-			    !test_bit(DE_CONTAINS_A_BARRIER, &epoch->flags)) {
-				set_bit(DE_BARRIER_IN_NEXT_EPOCH_ISSUED, &epoch->flags);
-				set_bit(DE_CONTAINS_A_BARRIER, &e->epoch->flags);
-				rw |= REQ_HARDBARRIER;
-				e->flags |= EE_IS_BARRIER;
-			}
-		}
-	}
 	spin_unlock(&mdev->epoch_lock);
 
 	dp_flags = be32_to_cpu(p->dp_flags);
@@ -1995,10 +1842,11 @@ static int receive_Data(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned
 		break;
 	}
 
-	if (mdev->state.pdsk == D_DISKLESS) {
+	if (mdev->state.pdsk < D_INCONSISTENT) {
 		/* In case we have the only disk of the cluster, */
 		drbd_set_out_of_sync(mdev, e->sector, e->size);
 		e->flags |= EE_CALL_AL_COMPLETE_IO;
+		e->flags &= ~EE_MAY_SET_IN_SYNC;
 		drbd_al_begin_io(mdev, e->sector);
 	}
 
@@ -3362,7 +3210,7 @@ static int receive_state(struct drbd_conf *mdev, enum drbd_packets cmd, unsigned
 		if (ns.conn == C_MASK) {
 			ns.conn = C_CONNECTED;
 			if (mdev->state.disk == D_NEGOTIATING) {
-				drbd_force_state(mdev, NS(disk, D_DISKLESS));
+				drbd_force_state(mdev, NS(disk, D_FAILED));
 			} else if (peer_state.disk == D_NEGOTIATING) {
 				dev_err(DEV, "Disk attach process on the peer node was aborted.\n");
 				peer_state.disk = D_DISKLESS;
@@ -3779,17 +3627,19 @@ static void drbdd(struct drbd_conf *mdev)
 		}
 
 		shs = drbd_cmd_handler[cmd].pkt_size - sizeof(union p_header);
-		rv = drbd_recv(mdev, &header->h80.payload, shs);
-		if (unlikely(rv != shs)) {
-			dev_err(DEV, "short read while reading sub header: rv=%d\n", rv);
-			goto err_out;
-		}
-
 		if (packet_size - shs > 0 && !drbd_cmd_handler[cmd].expect_payload) {
 			dev_err(DEV, "No payload expected %s l:%d\n", cmdname(cmd), packet_size);
 			goto err_out;
 		}
 
+		if (shs) {
+			rv = drbd_recv(mdev, &header->h80.payload, shs);
+			if (unlikely(rv != shs)) {
+				dev_err(DEV, "short read while reading sub header: rv=%d\n", rv);
+				goto err_out;
+			}
+		}
+
 		rv = drbd_cmd_handler[cmd].function(mdev, cmd, packet_size - shs);
 
 		if (unlikely(!rv)) {
diff --git a/drivers/block/drbd/drbd_req.c b/drivers/block/drbd/drbd_req.c
index 9e91a2545fc..11a75d32a2e 100644
--- a/drivers/block/drbd/drbd_req.c
+++ b/drivers/block/drbd/drbd_req.c
@@ -258,7 +258,7 @@ void _req_may_be_done(struct drbd_request *req, struct bio_and_error *m)
 		if (!hlist_unhashed(&req->colision))
 			hlist_del(&req->colision);
 		else
-			D_ASSERT((s & RQ_NET_MASK) == 0);
+			D_ASSERT((s & (RQ_NET_MASK & ~RQ_NET_DONE)) == 0);
 
 		/* for writes we need to do some extra housekeeping */
 		if (rw == WRITE)
@@ -813,7 +813,8 @@ static int drbd_make_request_common(struct drbd_conf *mdev, struct bio *bio)
 			     mdev->state.conn >= C_CONNECTED));
 
 	if (!(local || remote) && !is_susp(mdev->state)) {
-		dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
+		if (__ratelimit(&drbd_ratelimit_state))
+			dev_err(DEV, "IO ERROR: neither local nor remote disk\n");
 		goto fail_free_complete;
 	}
 
@@ -942,12 +943,21 @@ allocate_barrier:
 	if (local) {
 		req->private_bio->bi_bdev = mdev->ldev->backing_bdev;
 
-		if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
-				     : rw == READ  ? DRBD_FAULT_DT_RD
-				     :               DRBD_FAULT_DT_RA))
+		/* State may have changed since we grabbed our reference on the
+		 * mdev->ldev member. Double check, and short-circuit to endio.
+		 * In case the last activity log transaction failed to get on
+		 * stable storage, and this is a WRITE, we may not even submit
+		 * this bio. */
+		if (get_ldev(mdev)) {
+			if (FAULT_ACTIVE(mdev, rw == WRITE ? DRBD_FAULT_DT_WR
+					     : rw == READ  ? DRBD_FAULT_DT_RD
+					     :               DRBD_FAULT_DT_RA))
+				bio_endio(req->private_bio, -EIO);
+			else
+				generic_make_request(req->private_bio);
+			put_ldev(mdev);
+		} else
 			bio_endio(req->private_bio, -EIO);
-		else
-			generic_make_request(req->private_bio);
 	}
 
 	/* we need to plug ALWAYS since we possibly need to kick lo_dev.
@@ -1022,20 +1032,6 @@ int drbd_make_request_26(struct request_queue *q, struct bio *bio)
 		return 0;
 	}
 
-	/* Reject barrier requests if we know the underlying device does
-	 * not support them.
-	 * XXX: Need to get this info from peer as well some how so we
-	 * XXX: reject if EITHER side/data/metadata area does not support them.
-	 *
-	 * because of those XXX, this is not yet enabled,
-	 * i.e. in drbd_init_set_defaults we set the NO_BARRIER_SUPP bit.
-	 */
-	if (unlikely(bio->bi_rw & REQ_HARDBARRIER) && test_bit(NO_BARRIER_SUPP, &mdev->flags)) {
-		/* dev_warn(DEV, "Rejecting barrier request as underlying device does not support\n"); */
-		bio_endio(bio, -EOPNOTSUPP);
-		return 0;
-	}
-
 	/*
 	 * what we "blindly" assume:
 	 */
diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
index 181ea036482..ab2bd09d54b 100644
--- a/drivers/block/drbd/drbd_req.h
+++ b/drivers/block/drbd/drbd_req.h
@@ -339,7 +339,8 @@ static inline int _req_mod(struct drbd_request *req, enum drbd_req_event what)
 }
 
 /* completion of master bio is outside of spinlock.
- * If you need it irqsave, do it your self! */
+ * If you need it irqsave, do it your self!
+ * Which means: don't use from bio endio callback. */
 static inline int req_mod(struct drbd_request *req,
 		enum drbd_req_event what)
 {
diff --git a/drivers/block/drbd/drbd_worker.c b/drivers/block/drbd/drbd_worker.c
index 108d58015cd..34f224b018b 100644
--- a/drivers/block/drbd/drbd_worker.c
+++ b/drivers/block/drbd/drbd_worker.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/drbd.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/wait.h>
 #include <linux/mm.h>
 #include <linux/memcontrol.h>
@@ -102,12 +101,6 @@ void drbd_endio_read_sec_final(struct drbd_epoch_entry *e) __releases(local)
 	put_ldev(mdev);
 }
 
-static int is_failed_barrier(int ee_flags)
-{
-	return (ee_flags & (EE_IS_BARRIER|EE_WAS_ERROR|EE_RESUBMITTED))
-			== (EE_IS_BARRIER|EE_WAS_ERROR);
-}
-
 /* writes on behalf of the partner, or resync writes,
  * "submitted" by the receiver, final stage.  */
 static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(local)
@@ -119,21 +112,6 @@ static void drbd_endio_write_sec_final(struct drbd_epoch_entry *e) __releases(lo
 	int is_syncer_req;
 	int do_al_complete_io;
 
-	/* if this is a failed barrier request, disable use of barriers,
-	 * and schedule for resubmission */
-	if (is_failed_barrier(e->flags)) {
-		drbd_bump_write_ordering(mdev, WO_bdev_flush);
-		spin_lock_irqsave(&mdev->req_lock, flags);
-		list_del(&e->w.list);
-		e->flags = (e->flags & ~EE_WAS_ERROR) | EE_RESUBMITTED;
-		e->w.cb = w_e_reissue;
-		/* put_ldev actually happens below, once we come here again. */
-		__release(local);
-		spin_unlock_irqrestore(&mdev->req_lock, flags);
-		drbd_queue_work(&mdev->data.work, &e->w);
-		return;
-	}
-
 	D_ASSERT(e->block_id != ID_VACANT);
 
 	/* after we moved e to done_ee,
@@ -215,8 +193,10 @@ void drbd_endio_sec(struct bio *bio, int error)
  */
 void drbd_endio_pri(struct bio *bio, int error)
 {
+	unsigned long flags;
 	struct drbd_request *req = bio->bi_private;
 	struct drbd_conf *mdev = req->mdev;
+	struct bio_and_error m;
 	enum drbd_req_event what;
 	int uptodate = bio_flagged(bio, BIO_UPTODATE);
 
@@ -242,7 +222,13 @@ void drbd_endio_pri(struct bio *bio, int error)
 	bio_put(req->private_bio);
 	req->private_bio = ERR_PTR(error);
 
-	req_mod(req, what);
+	/* not req_mod(), we need irqsave here! */
+	spin_lock_irqsave(&mdev->req_lock, flags);
+	__req_mod(req, what, &m);
+	spin_unlock_irqrestore(&mdev->req_lock, flags);
+
+	if (m.bio)
+		complete_master_bio(mdev, &m);
 }
 
 int w_read_retry_remote(struct drbd_conf *mdev, struct drbd_work *w, int cancel)
@@ -925,7 +911,7 @@ out:
 	drbd_md_sync(mdev);
 
 	if (test_and_clear_bit(WRITE_BM_AFTER_RESYNC, &mdev->flags)) {
-		dev_warn(DEV, "Writing the whole bitmap, due to failed kmalloc\n");
+		dev_info(DEV, "Writing the whole bitmap\n");
 		drbd_queue_bitmap_io(mdev, &drbd_bm_write, NULL, "write from resync_finished");
 	}
 
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 3951020e494..25e4dffa0aa 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4352,7 +4352,7 @@ static int __init floppy_init(void)
 out_unreg_platform_dev:
 	platform_device_unregister(&floppy_device[drive]);
 out_flush_work:
-	flush_scheduled_work();
+	flush_work_sync(&floppy_work);
 	if (atomic_read(&usage_count))
 		floppy_release_irq_and_dma();
 out_unreg_region:
@@ -4422,7 +4422,7 @@ static int floppy_grab_irq_and_dma(void)
 	 * We might have scheduled a free_irq(), wait it to
 	 * drain first:
 	 */
-	flush_scheduled_work();
+	flush_work_sync(&floppy_work);
 
 	if (fd_request_irq()) {
 		DPRINT("Unable to grab IRQ%d for the floppy driver\n",
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 1e5284ef65f..7ea0bea2f7e 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -481,12 +481,6 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio)
 	if (bio_rw(bio) == WRITE) {
 		struct file *file = lo->lo_backing_file;
 
-		/* REQ_HARDBARRIER is deprecated */
-		if (bio->bi_rw & REQ_HARDBARRIER) {
-			ret = -EOPNOTSUPP;
-			goto out;
-		}
-
 		if (bio->bi_rw & REQ_FLUSH) {
 			ret = vfs_fsync(file, 0);
 			if (unlikely(ret && ret != -EINVAL)) {
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 6ec9d53806c..008d4a00b50 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -21,80 +21,9 @@
 
 
 
-   Instructions for use
-   --------------------
+   For usage instructions, please refer to:
 
-   1) Map a Linux block device to an existing rbd image.
-
-      Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
-
-      $ echo "192.168.0.1 name=admin rbd foo" > /sys/class/rbd/add
-
-      The snapshot name can be "-" or omitted to map the image read/write.
-
-   2) List all active blkdev<->object mappings.
-
-      In this example, we have performed step #1 twice, creating two blkdevs,
-      mapped to two separate rados objects in the rados rbd pool
-
-      $ cat /sys/class/rbd/list
-      #id     major   client_name     pool    name    snap    KB
-      0       254     client4143      rbd     foo     -      1024000
-
-      The columns, in order, are:
-      - blkdev unique id
-      - blkdev assigned major
-      - rados client id
-      - rados pool name
-      - rados block device name
-      - mapped snapshot ("-" if none)
-      - device size in KB
-
-
-   3) Create a snapshot.
-
-      Usage: <blkdev id> <snapname>
-
-      $ echo "0 mysnap" > /sys/class/rbd/snap_create
-
-
-   4) Listing a snapshot.
-
-      $ cat /sys/class/rbd/snaps_list
-      #id     snap    KB
-      0       -       1024000 (*)
-      0       foo     1024000
-
-      The columns, in order, are:
-      - blkdev unique id
-      - snapshot name, '-' means none (active read/write version)
-      - size of device at time of snapshot
-      - the (*) indicates this is the active version
-
-   5) Rollback to snapshot.
-
-      Usage: <blkdev id> <snapname>
-
-      $ echo "0 mysnap" > /sys/class/rbd/snap_rollback
-
-
-   6) Mapping an image using snapshot.
-
-      A snapshot mapping is read-only. This is being done by passing
-      snap=<snapname> to the options when adding a device.
-
-      $ echo "192.168.0.1 name=admin,snap=mysnap rbd foo" > /sys/class/rbd/add
-
-
-   7) Remove an active blkdev<->rbd image mapping.
-
-      In this example, we remove the mapping with blkdev unique id 1.
-
-      $ echo 1 > /sys/class/rbd/remove
-
-
-   NOTE:  The actual creation and deletion of rados objects is outside the scope
-   of this driver.
+                 Documentation/ABI/testing/sysfs-bus-rbd
 
  */
 
@@ -163,6 +92,14 @@ struct rbd_request {
 	u64			len;
 };
 
+struct rbd_snap {
+	struct	device		dev;
+	const char		*name;
+	size_t			size;
+	struct list_head	node;
+	u64			id;
+};
+
 /*
  * a single device
  */
@@ -193,21 +130,60 @@ struct rbd_device {
 	int read_only;
 
 	struct list_head	node;
+
+	/* list of snapshots */
+	struct list_head	snaps;
+
+	/* sysfs related */
+	struct device		dev;
+};
+
+static struct bus_type rbd_bus_type = {
+	.name		= "rbd",
 };
 
 static spinlock_t node_lock;      /* protects client get/put */
 
-static struct class *class_rbd;	  /* /sys/class/rbd */
 static DEFINE_MUTEX(ctl_mutex);	  /* Serialize open/close/setup/teardown */
 static LIST_HEAD(rbd_dev_list);    /* devices */
 static LIST_HEAD(rbd_client_list);      /* clients */
 
+static int __rbd_init_snaps_header(struct rbd_device *rbd_dev);
+static void rbd_dev_release(struct device *dev);
+static ssize_t rbd_snap_rollback(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf,
+				 size_t size);
+static ssize_t rbd_snap_add(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf,
+			    size_t count);
+static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
+				  struct rbd_snap *snap);;
+
+
+static struct rbd_device *dev_to_rbd(struct device *dev)
+{
+	return container_of(dev, struct rbd_device, dev);
+}
+
+static struct device *rbd_get_dev(struct rbd_device *rbd_dev)
+{
+	return get_device(&rbd_dev->dev);
+}
+
+static void rbd_put_dev(struct rbd_device *rbd_dev)
+{
+	put_device(&rbd_dev->dev);
+}
 
 static int rbd_open(struct block_device *bdev, fmode_t mode)
 {
 	struct gendisk *disk = bdev->bd_disk;
 	struct rbd_device *rbd_dev = disk->private_data;
 
+	rbd_get_dev(rbd_dev);
+
 	set_device_ro(bdev, rbd_dev->read_only);
 
 	if ((mode & FMODE_WRITE) && rbd_dev->read_only)
@@ -216,9 +192,19 @@ static int rbd_open(struct block_device *bdev, fmode_t mode)
 	return 0;
 }
 
+static int rbd_release(struct gendisk *disk, fmode_t mode)
+{
+	struct rbd_device *rbd_dev = disk->private_data;
+
+	rbd_put_dev(rbd_dev);
+
+	return 0;
+}
+
 static const struct block_device_operations rbd_bd_ops = {
 	.owner			= THIS_MODULE,
 	.open			= rbd_open,
+	.release		= rbd_release,
 };
 
 /*
@@ -361,7 +347,6 @@ static int rbd_header_from_disk(struct rbd_image_header *header,
 	int ret = -ENOMEM;
 
 	init_rwsem(&header->snap_rwsem);
-
 	header->snap_names_len = le64_to_cpu(ondisk->snap_names_len);
 	header->snapc = kmalloc(sizeof(struct ceph_snap_context) +
 				snap_count *
@@ -1256,10 +1241,20 @@ bad:
 	return -ERANGE;
 }
 
+static void __rbd_remove_all_snaps(struct rbd_device *rbd_dev)
+{
+	struct rbd_snap *snap;
+
+	while (!list_empty(&rbd_dev->snaps)) {
+		snap = list_first_entry(&rbd_dev->snaps, struct rbd_snap, node);
+		__rbd_remove_snap_dev(rbd_dev, snap);
+	}
+}
+
 /*
  * only read the first part of the ondisk header, without the snaps info
  */
-static int rbd_update_snaps(struct rbd_device *rbd_dev)
+static int __rbd_update_snaps(struct rbd_device *rbd_dev)
 {
 	int ret;
 	struct rbd_image_header h;
@@ -1280,12 +1275,15 @@ static int rbd_update_snaps(struct rbd_device *rbd_dev)
 	rbd_dev->header.total_snaps = h.total_snaps;
 	rbd_dev->header.snapc = h.snapc;
 	rbd_dev->header.snap_names = h.snap_names;
+	rbd_dev->header.snap_names_len = h.snap_names_len;
 	rbd_dev->header.snap_sizes = h.snap_sizes;
 	rbd_dev->header.snapc->seq = snap_seq;
 
+	ret = __rbd_init_snaps_header(rbd_dev);
+
 	up_write(&rbd_dev->header.snap_rwsem);
 
-	return 0;
+	return ret;
 }
 
 static int rbd_init_disk(struct rbd_device *rbd_dev)
@@ -1300,6 +1298,11 @@ static int rbd_init_disk(struct rbd_device *rbd_dev)
 	if (rc)
 		return rc;
 
+	/* no need to lock here, as rbd_dev is not registered yet */
+	rc = __rbd_init_snaps_header(rbd_dev);
+	if (rc)
+		return rc;
+
 	rc = rbd_header_set_snap(rbd_dev, rbd_dev->snap_name, &total_size);
 	if (rc)
 		return rc;
@@ -1343,54 +1346,360 @@ out:
 	return rc;
 }
 
-/********************************************************************
- * /sys/class/rbd/
- *                   add	map rados objects to blkdev
- *                   remove	unmap rados objects
- *                   list	show mappings
- *******************************************************************/
+/*
+  sysfs
+*/
+
+static ssize_t rbd_size_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+	return sprintf(buf, "%llu\n", (unsigned long long)rbd_dev->header.image_size);
+}
+
+static ssize_t rbd_major_show(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct rbd_device *rbd_dev = dev_to_rbd(dev);
 
-static void class_rbd_release(struct class *cls)
+	return sprintf(buf, "%d\n", rbd_dev->major);
+}
+
+static ssize_t rbd_client_id_show(struct device *dev,
+				  struct device_attribute *attr, char *buf)
 {
-	kfree(cls);
+	struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+	return sprintf(buf, "client%lld\n", ceph_client_id(rbd_dev->client));
 }
 
-static ssize_t class_rbd_list(struct class *c,
-			      struct class_attribute *attr,
-			      char *data)
+static ssize_t rbd_pool_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
 {
-	int n = 0;
-	struct list_head *tmp;
-	int max = PAGE_SIZE;
+	struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+	return sprintf(buf, "%s\n", rbd_dev->pool_name);
+}
+
+static ssize_t rbd_name_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+	return sprintf(buf, "%s\n", rbd_dev->obj);
+}
+
+static ssize_t rbd_snap_show(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+	return sprintf(buf, "%s\n", rbd_dev->snap_name);
+}
+
+static ssize_t rbd_image_refresh(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf,
+				 size_t size)
+{
+	struct rbd_device *rbd_dev = dev_to_rbd(dev);
+	int rc;
+	int ret = size;
 
 	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
 
-	n += snprintf(data, max,
-		      "#id\tmajor\tclient_name\tpool\tname\tsnap\tKB\n");
+	rc = __rbd_update_snaps(rbd_dev);
+	if (rc < 0)
+		ret = rc;
 
-	list_for_each(tmp, &rbd_dev_list) {
-		struct rbd_device *rbd_dev;
+	mutex_unlock(&ctl_mutex);
+	return ret;
+}
 
-		rbd_dev = list_entry(tmp, struct rbd_device, node);
-		n += snprintf(data+n, max-n,
-			      "%d\t%d\tclient%lld\t%s\t%s\t%s\t%lld\n",
-			      rbd_dev->id,
-			      rbd_dev->major,
-			      ceph_client_id(rbd_dev->client),
-			      rbd_dev->pool_name,
-			      rbd_dev->obj, rbd_dev->snap_name,
-			      rbd_dev->header.image_size >> 10);
-		if (n == max)
+static DEVICE_ATTR(size, S_IRUGO, rbd_size_show, NULL);
+static DEVICE_ATTR(major, S_IRUGO, rbd_major_show, NULL);
+static DEVICE_ATTR(client_id, S_IRUGO, rbd_client_id_show, NULL);
+static DEVICE_ATTR(pool, S_IRUGO, rbd_pool_show, NULL);
+static DEVICE_ATTR(name, S_IRUGO, rbd_name_show, NULL);
+static DEVICE_ATTR(refresh, S_IWUSR, NULL, rbd_image_refresh);
+static DEVICE_ATTR(current_snap, S_IRUGO, rbd_snap_show, NULL);
+static DEVICE_ATTR(create_snap, S_IWUSR, NULL, rbd_snap_add);
+static DEVICE_ATTR(rollback_snap, S_IWUSR, NULL, rbd_snap_rollback);
+
+static struct attribute *rbd_attrs[] = {
+	&dev_attr_size.attr,
+	&dev_attr_major.attr,
+	&dev_attr_client_id.attr,
+	&dev_attr_pool.attr,
+	&dev_attr_name.attr,
+	&dev_attr_current_snap.attr,
+	&dev_attr_refresh.attr,
+	&dev_attr_create_snap.attr,
+	&dev_attr_rollback_snap.attr,
+	NULL
+};
+
+static struct attribute_group rbd_attr_group = {
+	.attrs = rbd_attrs,
+};
+
+static const struct attribute_group *rbd_attr_groups[] = {
+	&rbd_attr_group,
+	NULL
+};
+
+static void rbd_sysfs_dev_release(struct device *dev)
+{
+}
+
+static struct device_type rbd_device_type = {
+	.name		= "rbd",
+	.groups		= rbd_attr_groups,
+	.release	= rbd_sysfs_dev_release,
+};
+
+
+/*
+  sysfs - snapshots
+*/
+
+static ssize_t rbd_snap_size_show(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+
+	return sprintf(buf, "%lld\n", (long long)snap->size);
+}
+
+static ssize_t rbd_snap_id_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+
+	return sprintf(buf, "%lld\n", (long long)snap->id);
+}
+
+static DEVICE_ATTR(snap_size, S_IRUGO, rbd_snap_size_show, NULL);
+static DEVICE_ATTR(snap_id, S_IRUGO, rbd_snap_id_show, NULL);
+
+static struct attribute *rbd_snap_attrs[] = {
+	&dev_attr_snap_size.attr,
+	&dev_attr_snap_id.attr,
+	NULL,
+};
+
+static struct attribute_group rbd_snap_attr_group = {
+	.attrs = rbd_snap_attrs,
+};
+
+static void rbd_snap_dev_release(struct device *dev)
+{
+	struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+	kfree(snap->name);
+	kfree(snap);
+}
+
+static const struct attribute_group *rbd_snap_attr_groups[] = {
+	&rbd_snap_attr_group,
+	NULL
+};
+
+static struct device_type rbd_snap_device_type = {
+	.groups		= rbd_snap_attr_groups,
+	.release	= rbd_snap_dev_release,
+};
+
+static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
+				  struct rbd_snap *snap)
+{
+	list_del(&snap->node);
+	device_unregister(&snap->dev);
+}
+
+static int rbd_register_snap_dev(struct rbd_device *rbd_dev,
+				  struct rbd_snap *snap,
+				  struct device *parent)
+{
+	struct device *dev = &snap->dev;
+	int ret;
+
+	dev->type = &rbd_snap_device_type;
+	dev->parent = parent;
+	dev->release = rbd_snap_dev_release;
+	dev_set_name(dev, "snap_%s", snap->name);
+	ret = device_register(dev);
+
+	return ret;
+}
+
+static int __rbd_add_snap_dev(struct rbd_device *rbd_dev,
+			      int i, const char *name,
+			      struct rbd_snap **snapp)
+{
+	int ret;
+	struct rbd_snap *snap = kzalloc(sizeof(*snap), GFP_KERNEL);
+	if (!snap)
+		return -ENOMEM;
+	snap->name = kstrdup(name, GFP_KERNEL);
+	snap->size = rbd_dev->header.snap_sizes[i];
+	snap->id = rbd_dev->header.snapc->snaps[i];
+	if (device_is_registered(&rbd_dev->dev)) {
+		ret = rbd_register_snap_dev(rbd_dev, snap,
+					     &rbd_dev->dev);
+		if (ret < 0)
+			goto err;
+	}
+	*snapp = snap;
+	return 0;
+err:
+	kfree(snap->name);
+	kfree(snap);
+	return ret;
+}
+
+/*
+ * search for the previous snap in a null delimited string list
+ */
+const char *rbd_prev_snap_name(const char *name, const char *start)
+{
+	if (name < start + 2)
+		return NULL;
+
+	name -= 2;
+	while (*name) {
+		if (name == start)
+			return start;
+		name--;
+	}
+	return name + 1;
+}
+
+/*
+ * compare the old list of snapshots that we have to what's in the header
+ * and update it accordingly. Note that the header holds the snapshots
+ * in a reverse order (from newest to oldest) and we need to go from
+ * older to new so that we don't get a duplicate snap name when
+ * doing the process (e.g., removed snapshot and recreated a new
+ * one with the same name.
+ */
+static int __rbd_init_snaps_header(struct rbd_device *rbd_dev)
+{
+	const char *name, *first_name;
+	int i = rbd_dev->header.total_snaps;
+	struct rbd_snap *snap, *old_snap = NULL;
+	int ret;
+	struct list_head *p, *n;
+
+	first_name = rbd_dev->header.snap_names;
+	name = first_name + rbd_dev->header.snap_names_len;
+
+	list_for_each_prev_safe(p, n, &rbd_dev->snaps) {
+		u64 cur_id;
+
+		old_snap = list_entry(p, struct rbd_snap, node);
+
+		if (i)
+			cur_id = rbd_dev->header.snapc->snaps[i - 1];
+
+		if (!i || old_snap->id < cur_id) {
+			/* old_snap->id was skipped, thus was removed */
+			__rbd_remove_snap_dev(rbd_dev, old_snap);
+			continue;
+		}
+		if (old_snap->id == cur_id) {
+			/* we have this snapshot already */
+			i--;
+			name = rbd_prev_snap_name(name, first_name);
+			continue;
+		}
+		for (; i > 0;
+		     i--, name = rbd_prev_snap_name(name, first_name)) {
+			if (!name) {
+				WARN_ON(1);
+				return -EINVAL;
+			}
+			cur_id = rbd_dev->header.snapc->snaps[i];
+			/* snapshot removal? handle it above */
+			if (cur_id >= old_snap->id)
+				break;
+			/* a new snapshot */
+			ret = __rbd_add_snap_dev(rbd_dev, i - 1, name, &snap);
+			if (ret < 0)
+				return ret;
+
+			/* note that we add it backward so using n and not p */
+			list_add(&snap->node, n);
+			p = &snap->node;
+		}
+	}
+	/* we're done going over the old snap list, just add what's left */
+	for (; i > 0; i--) {
+		name = rbd_prev_snap_name(name, first_name);
+		if (!name) {
+			WARN_ON(1);
+			return -EINVAL;
+		}
+		ret = __rbd_add_snap_dev(rbd_dev, i - 1, name, &snap);
+		if (ret < 0)
+			return ret;
+		list_add(&snap->node, &rbd_dev->snaps);
+	}
+
+	return 0;
+}
+
+
+static void rbd_root_dev_release(struct device *dev)
+{
+}
+
+static struct device rbd_root_dev = {
+	.init_name =    "rbd",
+	.release =      rbd_root_dev_release,
+};
+
+static int rbd_bus_add_dev(struct rbd_device *rbd_dev)
+{
+	int ret = -ENOMEM;
+	struct device *dev;
+	struct rbd_snap *snap;
+
+	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+	dev = &rbd_dev->dev;
+
+	dev->bus = &rbd_bus_type;
+	dev->type = &rbd_device_type;
+	dev->parent = &rbd_root_dev;
+	dev->release = rbd_dev_release;
+	dev_set_name(dev, "%d", rbd_dev->id);
+	ret = device_register(dev);
+	if (ret < 0)
+		goto done_free;
+
+	list_for_each_entry(snap, &rbd_dev->snaps, node) {
+		ret = rbd_register_snap_dev(rbd_dev, snap,
+					     &rbd_dev->dev);
+		if (ret < 0)
 			break;
 	}
 
 	mutex_unlock(&ctl_mutex);
-	return n;
+	return 0;
+done_free:
+	mutex_unlock(&ctl_mutex);
+	return ret;
 }
 
-static ssize_t class_rbd_add(struct class *c,
-			     struct class_attribute *attr,
-			     const char *buf, size_t count)
+static void rbd_bus_del_dev(struct rbd_device *rbd_dev)
+{
+	device_unregister(&rbd_dev->dev);
+}
+
+static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count)
 {
 	struct ceph_osd_client *osdc;
 	struct rbd_device *rbd_dev;
@@ -1419,6 +1728,7 @@ static ssize_t class_rbd_add(struct class *c,
 	/* static rbd_device initialization */
 	spin_lock_init(&rbd_dev->lock);
 	INIT_LIST_HEAD(&rbd_dev->node);
+	INIT_LIST_HEAD(&rbd_dev->snaps);
 
 	/* generate unique id: find highest unique id, add one */
 	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
@@ -1478,6 +1788,9 @@ static ssize_t class_rbd_add(struct class *c,
 	}
 	rbd_dev->major = irc;
 
+	rc = rbd_bus_add_dev(rbd_dev);
+	if (rc)
+		goto err_out_disk;
 	/* set up and announce blkdev mapping */
 	rc = rbd_init_disk(rbd_dev);
 	if (rc)
@@ -1487,6 +1800,8 @@ static ssize_t class_rbd_add(struct class *c,
 
 err_out_blkdev:
 	unregister_blkdev(rbd_dev->major, rbd_dev->name);
+err_out_disk:
+	rbd_free_disk(rbd_dev);
 err_out_client:
 	rbd_put_client(rbd_dev);
 	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
@@ -1518,35 +1833,10 @@ static struct rbd_device *__rbd_get_dev(unsigned long id)
 	return NULL;
 }
 
-static ssize_t class_rbd_remove(struct class *c,
-				struct class_attribute *attr,
-				const char *buf,
-				size_t count)
+static void rbd_dev_release(struct device *dev)
 {
-	struct rbd_device *rbd_dev = NULL;
-	int target_id, rc;
-	unsigned long ul;
-
-	rc = strict_strtoul(buf, 10, &ul);
-	if (rc)
-		return rc;
-
-	/* convert to int; abort if we lost anything in the conversion */
-	target_id = (int) ul;
-	if (target_id != ul)
-		return -EINVAL;
-
-	/* remove object from list immediately */
-	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
-	rbd_dev = __rbd_get_dev(target_id);
-	if (rbd_dev)
-		list_del_init(&rbd_dev->node);
-
-	mutex_unlock(&ctl_mutex);
-
-	if (!rbd_dev)
-		return -ENOENT;
+	struct rbd_device *rbd_dev =
+			container_of(dev, struct rbd_device, dev);
 
 	rbd_put_client(rbd_dev);
 
@@ -1557,67 +1847,11 @@ static ssize_t class_rbd_remove(struct class *c,
 
 	/* release module ref */
 	module_put(THIS_MODULE);
-
-	return count;
 }
 
-static ssize_t class_rbd_snaps_list(struct class *c,
-			      struct class_attribute *attr,
-			      char *data)
-{
-	struct rbd_device *rbd_dev = NULL;
-	struct list_head *tmp;
-	struct rbd_image_header *header;
-	int i, n = 0, max = PAGE_SIZE;
-	int ret;
-
-	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
-	n += snprintf(data, max, "#id\tsnap\tKB\n");
-
-	list_for_each(tmp, &rbd_dev_list) {
-		char *names, *p;
-		struct ceph_snap_context *snapc;
-
-		rbd_dev = list_entry(tmp, struct rbd_device, node);
-		header = &rbd_dev->header;
-
-		down_read(&header->snap_rwsem);
-
-		names = header->snap_names;
-		snapc = header->snapc;
-
-		n += snprintf(data + n, max - n, "%d\t%s\t%lld%s\n",
-			      rbd_dev->id, RBD_SNAP_HEAD_NAME,
-			      header->image_size >> 10,
-			      (!rbd_dev->cur_snap ? " (*)" : ""));
-		if (n == max)
-			break;
-
-		p = names;
-		for (i = 0; i < header->total_snaps; i++, p += strlen(p) + 1) {
-			n += snprintf(data + n, max - n, "%d\t%s\t%lld%s\n",
-			      rbd_dev->id, p, header->snap_sizes[i] >> 10,
-			      (rbd_dev->cur_snap &&
-			       (snap_index(header, i) == rbd_dev->cur_snap) ?
-			       " (*)" : ""));
-			if (n == max)
-				break;
-		}
-
-		up_read(&header->snap_rwsem);
-	}
-
-
-	ret = n;
-	mutex_unlock(&ctl_mutex);
-	return ret;
-}
-
-static ssize_t class_rbd_snaps_refresh(struct class *c,
-				struct class_attribute *attr,
-				const char *buf,
-				size_t count)
+static ssize_t rbd_remove(struct bus_type *bus,
+			  const char *buf,
+			  size_t count)
 {
 	struct rbd_device *rbd_dev = NULL;
 	int target_id, rc;
@@ -1641,95 +1875,70 @@ static ssize_t class_rbd_snaps_refresh(struct class *c,
 		goto done;
 	}
 
-	rc = rbd_update_snaps(rbd_dev);
-	if (rc < 0)
-		ret = rc;
+	list_del_init(&rbd_dev->node);
+
+	__rbd_remove_all_snaps(rbd_dev);
+	rbd_bus_del_dev(rbd_dev);
 
 done:
 	mutex_unlock(&ctl_mutex);
 	return ret;
 }
 
-static ssize_t class_rbd_snap_create(struct class *c,
-				struct class_attribute *attr,
-				const char *buf,
-				size_t count)
+static ssize_t rbd_snap_add(struct device *dev,
+			    struct device_attribute *attr,
+			    const char *buf,
+			    size_t count)
 {
-	struct rbd_device *rbd_dev = NULL;
-	int target_id, ret;
-	char *name;
-
-	name = kmalloc(RBD_MAX_SNAP_NAME_LEN + 1, GFP_KERNEL);
+	struct rbd_device *rbd_dev = dev_to_rbd(dev);
+	int ret;
+	char *name = kmalloc(count + 1, GFP_KERNEL);
 	if (!name)
 		return -ENOMEM;
 
-	/* parse snaps add command */
-	if (sscanf(buf, "%d "
-		   "%" __stringify(RBD_MAX_SNAP_NAME_LEN) "s",
-		   &target_id,
-		   name) != 2) {
-		ret = -EINVAL;
-		goto done;
-	}
+	snprintf(name, count, "%s", buf);
 
 	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
 
-	rbd_dev = __rbd_get_dev(target_id);
-	if (!rbd_dev) {
-		ret = -ENOENT;
-		goto done_unlock;
-	}
-
 	ret = rbd_header_add_snap(rbd_dev,
 				  name, GFP_KERNEL);
 	if (ret < 0)
 		goto done_unlock;
 
-	ret = rbd_update_snaps(rbd_dev);
+	ret = __rbd_update_snaps(rbd_dev);
 	if (ret < 0)
 		goto done_unlock;
 
 	ret = count;
 done_unlock:
 	mutex_unlock(&ctl_mutex);
-done:
 	kfree(name);
 	return ret;
 }
 
-static ssize_t class_rbd_rollback(struct class *c,
-				struct class_attribute *attr,
-				const char *buf,
-				size_t count)
+static ssize_t rbd_snap_rollback(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf,
+				 size_t count)
 {
-	struct rbd_device *rbd_dev = NULL;
-	int target_id, ret;
+	struct rbd_device *rbd_dev = dev_to_rbd(dev);
+	int ret;
 	u64 snapid;
-	char snap_name[RBD_MAX_SNAP_NAME_LEN];
 	u64 cur_ofs;
-	char *seg_name;
+	char *seg_name = NULL;
+	char *snap_name = kmalloc(count + 1, GFP_KERNEL);
+	ret = -ENOMEM;
+	if (!snap_name)
+		return ret;
 
 	/* parse snaps add command */
-	if (sscanf(buf, "%d "
-		   "%" __stringify(RBD_MAX_SNAP_NAME_LEN) "s",
-		   &target_id,
-		   snap_name) != 2) {
-		return -EINVAL;
-	}
-
-	ret = -ENOMEM;
+	snprintf(snap_name, count, "%s", buf);
 	seg_name = kmalloc(RBD_MAX_SEG_NAME_LEN + 1, GFP_NOIO);
 	if (!seg_name)
-		return ret;
+		goto done;
 
 	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
 
-	rbd_dev = __rbd_get_dev(target_id);
-	if (!rbd_dev) {
-		ret = -ENOENT;
-		goto done_unlock;
-	}
-
 	ret = snap_by_name(&rbd_dev->header, snap_name, &snapid, NULL);
 	if (ret < 0)
 		goto done_unlock;
@@ -1750,7 +1959,7 @@ static ssize_t class_rbd_rollback(struct class *c,
 				   seg_name, ret);
 	}
 
-	ret = rbd_update_snaps(rbd_dev);
+	ret = __rbd_update_snaps(rbd_dev);
 	if (ret < 0)
 		goto done_unlock;
 
@@ -1758,57 +1967,42 @@ static ssize_t class_rbd_rollback(struct class *c,
 
 done_unlock:
 	mutex_unlock(&ctl_mutex);
+done:
 	kfree(seg_name);
+	kfree(snap_name);
 
 	return ret;
 }
 
-static struct class_attribute class_rbd_attrs[] = {
-	__ATTR(add,		0200, NULL, class_rbd_add),
-	__ATTR(remove,		0200, NULL, class_rbd_remove),
-	__ATTR(list,		0444, class_rbd_list, NULL),
-	__ATTR(snaps_refresh,	0200, NULL, class_rbd_snaps_refresh),
-	__ATTR(snap_create,	0200, NULL, class_rbd_snap_create),
-	__ATTR(snaps_list,	0444, class_rbd_snaps_list, NULL),
-	__ATTR(snap_rollback,	0200, NULL, class_rbd_rollback),
+static struct bus_attribute rbd_bus_attrs[] = {
+	__ATTR(add, S_IWUSR, NULL, rbd_add),
+	__ATTR(remove, S_IWUSR, NULL, rbd_remove),
 	__ATTR_NULL
 };
 
 /*
  * create control files in sysfs
- * /sys/class/rbd/...
+ * /sys/bus/rbd/...
  */
 static int rbd_sysfs_init(void)
 {
-	int ret = -ENOMEM;
+	int ret;
 
-	class_rbd = kzalloc(sizeof(*class_rbd), GFP_KERNEL);
-	if (!class_rbd)
-		goto out;
+	rbd_bus_type.bus_attrs = rbd_bus_attrs;
 
-	class_rbd->name = DRV_NAME;
-	class_rbd->owner = THIS_MODULE;
-	class_rbd->class_release = class_rbd_release;
-	class_rbd->class_attrs = class_rbd_attrs;
+	ret = bus_register(&rbd_bus_type);
+	 if (ret < 0)
+		return ret;
 
-	ret = class_register(class_rbd);
-	if (ret)
-		goto out_class;
-	return 0;
+	ret = device_register(&rbd_root_dev);
 
-out_class:
-	kfree(class_rbd);
-	class_rbd = NULL;
-	pr_err(DRV_NAME ": failed to create class rbd\n");
-out:
 	return ret;
 }
 
 static void rbd_sysfs_cleanup(void)
 {
-	if (class_rbd)
-		class_destroy(class_rbd);
-	class_rbd = NULL;
+	device_unregister(&rbd_root_dev);
+	bus_unregister(&rbd_bus_type);
 }
 
 int __init rbd_init(void)
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 06e2812ba12..d7aa39e349a 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -65,14 +65,14 @@ enum blkif_state {
 
 struct blk_shadow {
 	struct blkif_request req;
-	unsigned long request;
+	struct request *request;
 	unsigned long frame[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 };
 
 static DEFINE_MUTEX(blkfront_mutex);
 static const struct block_device_operations xlvbd_block_fops;
 
-#define BLK_RING_SIZE __RING_SIZE((struct blkif_sring *)0, PAGE_SIZE)
+#define BLK_RING_SIZE __CONST_RING_SIZE(blkif, PAGE_SIZE)
 
 /*
  * We have one of these per vbd, whether ide, scsi or 'other'.  They
@@ -136,7 +136,7 @@ static void add_id_to_freelist(struct blkfront_info *info,
 			       unsigned long id)
 {
 	info->shadow[id].req.id  = info->shadow_free;
-	info->shadow[id].request = 0;
+	info->shadow[id].request = NULL;
 	info->shadow_free = id;
 }
 
@@ -245,14 +245,11 @@ static int blkif_ioctl(struct block_device *bdev, fmode_t mode,
 }
 
 /*
- * blkif_queue_request
+ * Generate a Xen blkfront IO request from a blk layer request.  Reads
+ * and writes are handled as expected.  Since we lack a loose flush
+ * request, we map flushes into a full ordered barrier.
  *
- * request block io
- *
- * id: for guest use only.
- * operation: BLKIF_OP_{READ,WRITE,PROBE}
- * buffer: buffer to read/write into. this should be a
- *   virtual address in the guest os.
+ * @req: a request struct
  */
 static int blkif_queue_request(struct request *req)
 {
@@ -281,7 +278,7 @@ static int blkif_queue_request(struct request *req)
 	/* Fill out a communications ring structure. */
 	ring_req = RING_GET_REQUEST(&info->ring, info->ring.req_prod_pvt);
 	id = get_id_from_freelist(info);
-	info->shadow[id].request = (unsigned long)req;
+	info->shadow[id].request = req;
 
 	ring_req->id = id;
 	ring_req->sector_number = (blkif_sector_t)blk_rq_pos(req);
@@ -289,8 +286,18 @@ static int blkif_queue_request(struct request *req)
 
 	ring_req->operation = rq_data_dir(req) ?
 		BLKIF_OP_WRITE : BLKIF_OP_READ;
-	if (req->cmd_flags & REQ_HARDBARRIER)
+
+	if (req->cmd_flags & (REQ_FLUSH | REQ_FUA)) {
+		/*
+		 * Ideally we could just do an unordered
+		 * flush-to-disk, but all we have is a full write
+		 * barrier at the moment.  However, a barrier write is
+		 * a superset of FUA, so we can implement it the same
+		 * way.  (It's also a FLUSH+FUA, since it is
+		 * guaranteed ordered WRT previous writes.)
+		 */
 		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
+	}
 
 	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
 	BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
@@ -540,7 +547,7 @@ static void xlvbd_release_gendisk(struct blkfront_info *info)
 	spin_unlock_irqrestore(&blkif_io_lock, flags);
 
 	/* Flush gnttab callback work. Must be done with no locks held. */
-	flush_scheduled_work();
+	flush_work_sync(&info->work);
 
 	del_gendisk(info->gd);
 
@@ -589,7 +596,7 @@ static void blkif_free(struct blkfront_info *info, int suspend)
 	spin_unlock_irq(&blkif_io_lock);
 
 	/* Flush gnttab callback work. Must be done with no locks held. */
-	flush_scheduled_work();
+	flush_work_sync(&info->work);
 
 	/* Free resources associated with old device channel. */
 	if (info->ring_ref != GRANT_INVALID_REF) {
@@ -636,7 +643,7 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 
 		bret = RING_GET_RESPONSE(&info->ring, i);
 		id   = bret->id;
-		req  = (struct request *)info->shadow[id].request;
+		req  = info->shadow[id].request;
 
 		blkif_completion(&info->shadow[id]);
 
@@ -649,6 +656,16 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
 				printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
 				       info->gd->disk_name);
 				error = -EOPNOTSUPP;
+			}
+			if (unlikely(bret->status == BLKIF_RSP_ERROR &&
+				     info->shadow[id].req.nr_segments == 0)) {
+				printk(KERN_WARNING "blkfront: %s: empty write barrier op failed\n",
+				       info->gd->disk_name);
+				error = -EOPNOTSUPP;
+			}
+			if (unlikely(error)) {
+				if (error == -EOPNOTSUPP)
+					error = 0;
 				info->feature_flush = 0;
 				xlvbd_flush(info);
 			}
@@ -901,7 +918,7 @@ static int blkif_recover(struct blkfront_info *info)
 	/* Stage 3: Find pending requests and requeue them. */
 	for (i = 0; i < BLK_RING_SIZE; i++) {
 		/* Not in use? */
-		if (copy[i].request == 0)
+		if (!copy[i].request)
 			continue;
 
 		/* Grab a request slot and copy shadow state into it. */
@@ -918,9 +935,7 @@ static int blkif_recover(struct blkfront_info *info)
 				req->seg[j].gref,
 				info->xbdev->otherend_id,
 				pfn_to_mfn(info->shadow[req->id].frame[j]),
-				rq_data_dir(
-					(struct request *)
-					info->shadow[req->id].request));
+				rq_data_dir(info->shadow[req->id].request));
 		info->shadow[req->id].req = *req;
 
 		info->ring.req_prod_pvt++;
@@ -1069,14 +1084,8 @@ static void blkfront_connect(struct blkfront_info *info)
 	 */
 	info->feature_flush = 0;
 
-	/*
-	 * The driver doesn't properly handled empty flushes, so
-	 * lets disable barrier support for now.
-	 */
-#if 0
 	if (!err && barrier)
-		info->feature_flush = REQ_FLUSH;
-#endif
+		info->feature_flush = REQ_FLUSH | REQ_FUA;
 
 	err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
 	if (err) {
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 128cae4e862..949ed09c636 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -35,6 +35,10 @@
 static struct usb_device_id ath3k_table[] = {
 	/* Atheros AR3011 */
 	{ USB_DEVICE(0x0CF3, 0x3000) },
+
+	/* Atheros AR3011 with sflash firmware*/
+	{ USB_DEVICE(0x0CF3, 0x3002) },
+
 	{ }	/* Terminating entry */
 };
 
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d120a5c1c09..1da773f899a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -68,6 +68,9 @@ static struct usb_device_id btusb_table[] = {
 	/* Apple MacBookPro6,2 */
 	{ USB_DEVICE(0x05ac, 0x8218) },
 
+	/* Apple MacBookAir3,1, MacBookAir3,2 */
+	{ USB_DEVICE(0x05ac, 0x821b) },
+
 	/* AVM BlueFRITZ! USB v2.0 */
 	{ USB_DEVICE(0x057c, 0x3800) },
 
@@ -96,6 +99,9 @@ static struct usb_device_id blacklist_table[] = {
 	/* Broadcom BCM2033 without firmware */
 	{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
 
+	/* Atheros 3011 with sflash firmware */
+	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
 	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
@@ -236,7 +242,8 @@ static void btusb_intr_complete(struct urb *urb)
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
-		BT_ERR("%s urb %p failed to resubmit (%d)",
+		if (err != -EPERM)
+			BT_ERR("%s urb %p failed to resubmit (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
 	}
@@ -320,7 +327,8 @@ static void btusb_bulk_complete(struct urb *urb)
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
-		BT_ERR("%s urb %p failed to resubmit (%d)",
+		if (err != -EPERM)
+			BT_ERR("%s urb %p failed to resubmit (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
 	}
@@ -409,7 +417,8 @@ static void btusb_isoc_complete(struct urb *urb)
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
-		BT_ERR("%s urb %p failed to resubmit (%d)",
+		if (err != -EPERM)
+			BT_ERR("%s urb %p failed to resubmit (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
 	}
@@ -1029,6 +1038,8 @@ static int btusb_probe(struct usb_interface *intf,
 
 	usb_set_intfdata(intf, data);
 
+	usb_enable_autosuspend(interface_to_usbdev(intf));
+
 	return 0;
 }
 
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 720148294e6..3c6cabcb7d8 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -311,8 +311,10 @@ static void hci_uart_tty_close(struct tty_struct *tty)
 
 		if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
 			hu->proto->close(hu);
-			hci_unregister_dev(hdev);
-			hci_free_dev(hdev);
+			if (hdev) {
+				hci_unregister_dev(hdev);
+				hci_free_dev(hdev);
+			}
 		}
 	}
 }
diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index de65915308f..64a21461c40 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -837,7 +837,7 @@ probe_fail_no_mem:
 
 static int __devexit remove_gdrom(struct platform_device *devptr)
 {
-	flush_scheduled_work();
+	flush_work_sync(&work);
 	blk_cleanup_queue(gd.gdrom_rq);
 	free_irq(HW_EVENT_GDROM_CMD, &gd);
 	free_irq(HW_EVENT_GDROM_DMA, &gd);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 43d3395325c..d4a7776f4b7 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -682,6 +682,15 @@ config HVC_UDBG
        select HVC_DRIVER
        default n
 
+config HVC_DCC
+       bool "ARM JTAG DCC console"
+       depends on ARM
+       select HVC_DRIVER
+       help
+         This console uses the JTAG DCC on ARM to create a console under the HVC
+	 driver. This console is used through a JTAG only on ARM. If you don't have
+	 a JTAG then you probably don't want this option.
+
 config VIRTIO_CONSOLE
 	tristate "Virtio console"
 	depends on VIRTIO
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index ba53ec956c9..fa0b824b7a6 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_HVC_CONSOLE)	+= hvc_vio.o hvsi.o
 obj-$(CONFIG_HVC_ISERIES)	+= hvc_iseries.o
 obj-$(CONFIG_HVC_RTAS)		+= hvc_rtas.o
 obj-$(CONFIG_HVC_TILE)		+= hvc_tile.o
+obj-$(CONFIG_HVC_DCC)		+= hvc_dcc.o
 obj-$(CONFIG_HVC_BEAT)		+= hvc_beat.o
 obj-$(CONFIG_HVC_DRIVER)	+= hvc_console.o
 obj-$(CONFIG_HVC_IRQ)		+= hvc_irq.o
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 42396df5555..9252e85706e 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -38,7 +38,7 @@ static int agp_bridges_found;
 
 static void amd64_tlbflush(struct agp_memory *temp)
 {
-	k8_flush_garts();
+	amd_flush_garts();
 }
 
 static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
@@ -124,7 +124,7 @@ static int amd64_fetch_size(void)
 	u32 temp;
 	struct aper_size_info_32 *values;
 
-	dev = k8_northbridges.nb_misc[0];
+	dev = node_to_amd_nb(0)->misc;
 	if (dev==NULL)
 		return 0;
 
@@ -181,16 +181,15 @@ static int amd_8151_configure(void)
 	unsigned long gatt_bus = virt_to_phys(agp_bridge->gatt_table_real);
 	int i;
 
-	if (!k8_northbridges.gart_supported)
+	if (!amd_nb_has_feature(AMD_NB_GART))
 		return 0;
 
 	/* Configure AGP regs in each x86-64 host bridge. */
-	for (i = 0; i < k8_northbridges.num; i++) {
+	for (i = 0; i < amd_nb_num(); i++) {
 		agp_bridge->gart_bus_addr =
-				amd64_configure(k8_northbridges.nb_misc[i],
-						gatt_bus);
+			amd64_configure(node_to_amd_nb(i)->misc, gatt_bus);
 	}
-	k8_flush_garts();
+	amd_flush_garts();
 	return 0;
 }
 
@@ -200,11 +199,11 @@ static void amd64_cleanup(void)
 	u32 tmp;
 	int i;
 
-	if (!k8_northbridges.gart_supported)
+	if (!amd_nb_has_feature(AMD_NB_GART))
 		return;
 
-	for (i = 0; i < k8_northbridges.num; i++) {
-		struct pci_dev *dev = k8_northbridges.nb_misc[i];
+	for (i = 0; i < amd_nb_num(); i++) {
+		struct pci_dev *dev = node_to_amd_nb(i)->misc;
 		/* disable gart translation */
 		pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &tmp);
 		tmp &= ~GARTEN;
@@ -331,15 +330,15 @@ static __devinit int cache_nbs(struct pci_dev *pdev, u32 cap_ptr)
 {
 	int i;
 
-	if (cache_k8_northbridges() < 0)
+	if (amd_cache_northbridges() < 0)
 		return -ENODEV;
 
-	if (!k8_northbridges.gart_supported)
+	if (!amd_nb_has_feature(AMD_NB_GART))
 		return -ENODEV;
 
 	i = 0;
-	for (i = 0; i < k8_northbridges.num; i++) {
-		struct pci_dev *dev = k8_northbridges.nb_misc[i];
+	for (i = 0; i < amd_nb_num(); i++) {
+		struct pci_dev *dev = node_to_amd_nb(i)->misc;
 		if (fix_northbridge(dev, pdev, cap_ptr) < 0) {
 			dev_err(&dev->dev, "no usable aperture found\n");
 #ifdef __x86_64__
@@ -416,7 +415,7 @@ static int __devinit uli_agp_init(struct pci_dev *pdev)
 	}
 
 	/* shadow x86-64 registers into ULi registers */
-	pci_read_config_dword (k8_northbridges.nb_misc[0], AMD64_GARTAPERTUREBASE,
+	pci_read_config_dword (node_to_amd_nb(0)->misc, AMD64_GARTAPERTUREBASE,
 			       &httfea);
 
 	/* if x86-64 aperture base is beyond 4G, exit here */
@@ -484,7 +483,7 @@ static int nforce3_agp_init(struct pci_dev *pdev)
 	pci_write_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, tmp);
 
 	/* shadow x86-64 registers into NVIDIA registers */
-	pci_read_config_dword (k8_northbridges.nb_misc[0], AMD64_GARTAPERTUREBASE,
+	pci_read_config_dword (node_to_amd_nb(0)->misc, AMD64_GARTAPERTUREBASE,
 			       &apbase);
 
 	/* if x86-64 aperture base is beyond 4G, exit here */
@@ -778,7 +777,7 @@ int __init agp_amd64_init(void)
 		}
 
 		/* First check that we have at least one AMD64 NB */
-		if (!pci_dev_present(k8_nb_ids))
+		if (!pci_dev_present(amd_nb_misc_ids))
 			return -ENODEV;
 
 		/* Look for any AGP bridge */
diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c
index 43412c03969..3cb4539a98b 100644
--- a/drivers/char/agp/frontend.c
+++ b/drivers/char/agp/frontend.c
@@ -39,7 +39,6 @@
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include "agp.h"
diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c
index 6b6760ea243..29ac6d499fa 100644
--- a/drivers/char/agp/intel-gtt.c
+++ b/drivers/char/agp/intel-gtt.c
@@ -812,8 +812,10 @@ static int intel_fake_agp_fetch_size(void)
 
 static void i830_cleanup(void)
 {
-	kunmap(intel_private.i8xx_page);
-	intel_private.i8xx_flush_page = NULL;
+	if (intel_private.i8xx_flush_page) {
+		kunmap(intel_private.i8xx_flush_page);
+		intel_private.i8xx_flush_page = NULL;
+	}
 
 	__free_page(intel_private.i8xx_page);
 	intel_private.i8xx_page = NULL;
@@ -1190,12 +1192,19 @@ static void i9xx_chipset_flush(void)
 		writel(1, intel_private.i9xx_flush_page);
 }
 
-static void i965_write_entry(dma_addr_t addr, unsigned int entry,
+static void i965_write_entry(dma_addr_t addr,
+			     unsigned int entry,
 			     unsigned int flags)
 {
+	u32 pte_flags;
+
+	pte_flags = I810_PTE_VALID;
+	if (flags == AGP_USER_CACHED_MEMORY)
+		pte_flags |= I830_PTE_SYSTEM_CACHED;
+
 	/* Shift high bits down */
 	addr |= (addr >> 28) & 0xf0;
-	writel(addr | I810_PTE_VALID, intel_private.gtt + entry);
+	writel(addr | pte_flags, intel_private.gtt + entry);
 }
 
 static bool gen6_check_flags(unsigned int flags)
@@ -1210,14 +1219,14 @@ static void gen6_write_entry(dma_addr_t addr, unsigned int entry,
 	unsigned int gfdt = flags & AGP_USER_CACHED_MEMORY_GFDT;
 	u32 pte_flags;
 
-	if (type_mask == AGP_USER_UNCACHED_MEMORY)
+	if (type_mask == AGP_USER_MEMORY)
 		pte_flags = GEN6_PTE_UNCACHED | I810_PTE_VALID;
 	else if (type_mask == AGP_USER_CACHED_MEMORY_LLC_MLC) {
-		pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
+		pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
 		if (gfdt)
 			pte_flags |= GEN6_PTE_GFDT;
 	} else { /* set 'normal'/'cached' to LLC by default */
-		pte_flags = GEN6_PTE_LLC_MLC | I810_PTE_VALID;
+		pte_flags = GEN6_PTE_LLC | I810_PTE_VALID;
 		if (gfdt)
 			pte_flags |= GEN6_PTE_GFDT;
 	}
diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index b0a70461a12..6ee3348bc3e 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -81,7 +81,6 @@ static char *serial_version = "4.30";
 #include <linux/mm.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
 #include <linux/platform_device.h>
@@ -1299,7 +1298,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 {
 	struct async_struct * info = tty->driver_data;
 	struct async_icount cprev, cnow;	/* kernel counter temps */
-	struct serial_icounter_struct icount;
 	void __user *argp = (void __user *)arg;
 	unsigned long flags;
 
diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c
index f6718f05dad..095ab90535c 100644
--- a/drivers/char/briq_panel.c
+++ b/drivers/char/briq_panel.c
@@ -6,7 +6,6 @@
 
 #include <linux/module.h>
 
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/tty.h>
diff --git a/drivers/char/hpet.c b/drivers/char/hpet.c
index 55b8667f739..7066e801b9d 100644
--- a/drivers/char/hpet.c
+++ b/drivers/char/hpet.c
@@ -14,7 +14,6 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/miscdevice.h>
 #include <linux/major.h>
diff --git a/drivers/char/hvc_dcc.c b/drivers/char/hvc_dcc.c
new file mode 100644
index 00000000000..6470f63deb4
--- /dev/null
+++ b/drivers/char/hvc_dcc.c
@@ -0,0 +1,133 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+
+#include <asm/processor.h>
+
+#include "hvc_console.h"
+
+/* DCC Status Bits */
+#define DCC_STATUS_RX		(1 << 30)
+#define DCC_STATUS_TX		(1 << 29)
+
+static inline u32 __dcc_getstatus(void)
+{
+	u32 __ret;
+
+	asm("mrc p14, 0, %0, c0, c1, 0	@ read comms ctrl reg"
+		: "=r" (__ret) : : "cc");
+
+	return __ret;
+}
+
+
+#if defined(CONFIG_CPU_V7)
+static inline char __dcc_getchar(void)
+{
+	char __c;
+
+	asm("get_wait:	mrc p14, 0, pc, c0, c1, 0                          \n\
+			bne get_wait                                       \n\
+			mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
+		: "=r" (__c) : : "cc");
+
+	return __c;
+}
+#else
+static inline char __dcc_getchar(void)
+{
+	char __c;
+
+	asm("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
+		: "=r" (__c));
+
+	return __c;
+}
+#endif
+
+#if defined(CONFIG_CPU_V7)
+static inline void __dcc_putchar(char c)
+{
+	asm("put_wait:	mrc p14, 0, pc, c0, c1, 0                 \n\
+			bcs put_wait                              \n\
+			mcr p14, 0, %0, c0, c5, 0                   "
+	: : "r" (c) : "cc");
+}
+#else
+static inline void __dcc_putchar(char c)
+{
+	asm("mcr p14, 0, %0, c0, c5, 0	@ write a char"
+		: /* no output register */
+		: "r" (c));
+}
+#endif
+
+static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
+{
+	int i;
+
+	for (i = 0; i < count; i++) {
+		while (__dcc_getstatus() & DCC_STATUS_TX)
+			cpu_relax();
+
+		__dcc_putchar((char)(buf[i] & 0xFF));
+	}
+
+	return count;
+}
+
+static int hvc_dcc_get_chars(uint32_t vt, char *buf, int count)
+{
+	int i;
+
+	for (i = 0; i < count; ++i) {
+		int c = -1;
+
+		if (__dcc_getstatus() & DCC_STATUS_RX)
+			c = __dcc_getchar();
+		if (c < 0)
+			break;
+		buf[i] = c;
+	}
+
+	return i;
+}
+
+static const struct hv_ops hvc_dcc_get_put_ops = {
+	.get_chars = hvc_dcc_get_chars,
+	.put_chars = hvc_dcc_put_chars,
+};
+
+static int __init hvc_dcc_console_init(void)
+{
+	hvc_instantiate(0, 0, &hvc_dcc_get_put_ops);
+	return 0;
+}
+console_initcall(hvc_dcc_console_init);
+
+static int __init hvc_dcc_init(void)
+{
+	hvc_alloc(0, 0, &hvc_dcc_get_put_ops, 128);
+	return 0;
+}
+device_initcall(hvc_dcc_init);
diff --git a/drivers/char/hvsi.c b/drivers/char/hvsi.c
index a2bc885ce60..67a75a502c0 100644
--- a/drivers/char/hvsi.c
+++ b/drivers/char/hvsi.c
@@ -850,8 +850,8 @@ static void hvsi_flush_output(struct hvsi_struct *hp)
 	wait_event_timeout(hp->emptyq, (hp->n_outbuf <= 0), HVSI_TIMEOUT);
 
 	/* 'writer' could still be pending if it didn't see n_outbuf = 0 yet */
-	cancel_delayed_work(&hp->writer);
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&hp->writer);
+	flush_work_sync(&hp->handshaker);
 
 	/*
 	 * it's also possible that our timeout expired and hvsi_write_worker
diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c
index 788da05190c..2016aad8520 100644
--- a/drivers/char/hw_random/core.c
+++ b/drivers/char/hw_random/core.c
@@ -37,7 +37,6 @@
 #include <linux/kernel.h>
 #include <linux/fs.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
 #include <linux/delay.h>
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index 3bc0eef8871..d72433f2d31 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -120,7 +120,7 @@ static int i8k_smm(struct smm_regs *regs)
 	int eax = regs->eax;
 
 #if defined(CONFIG_X86_64)
-	asm("pushq %%rax\n\t"
+	asm volatile("pushq %%rax\n\t"
 		"movl 0(%%rax),%%edx\n\t"
 		"pushq %%rdx\n\t"
 		"movl 4(%%rax),%%ebx\n\t"
@@ -146,7 +146,7 @@ static int i8k_smm(struct smm_regs *regs)
 		:    "a"(regs)
 		:    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
 #else
-	asm("pushl %%eax\n\t"
+	asm volatile("pushl %%eax\n\t"
 	    "movl 0(%%eax),%%edx\n\t"
 	    "push %%edx\n\t"
 	    "movl 4(%%eax),%%ebx\n\t"
@@ -167,7 +167,8 @@ static int i8k_smm(struct smm_regs *regs)
 	    "movl %%edx,0(%%eax)\n\t"
 	    "lahf\n\t"
 	    "shrl $8,%%eax\n\t"
-	    "andl $1,%%eax\n":"=a"(rc)
+	    "andl $1,%%eax\n"
+	    :"=a"(rc)
 	    :    "a"(regs)
 	    :    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
 #endif
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index fcd02baa7d6..c3a025356b8 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -3224,7 +3224,7 @@ ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned lo
 
 MODULE_LICENSE("GPL");
 
-static struct pci_device_id ip2main_pci_tbl[] __devinitdata = {
+static struct pci_device_id ip2main_pci_tbl[] __devinitdata __used = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) },
 	{ }
 };
diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c
index 667abd23ad6..7c6de4c9245 100644
--- a/drivers/char/istallion.c
+++ b/drivers/char/istallion.c
@@ -21,7 +21,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index dd3f9b1f11b..294d03e8c61 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1828,7 +1828,6 @@ static int ntty_ioctl(struct tty_struct *tty, struct file *file,
 		      unsigned int cmd, unsigned long arg)
 {
 	struct port *port = tty->driver_data;
-	void __user *argp = (void __user *)arg;
 	int rval = -ENOIOCTLCMD;
 
 	DBG1("******** IOCTL, cmd: %d", cmd);
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index d962f25dcc2..777181a2e60 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -979,8 +979,9 @@ static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count,
 		if (dev->flags0 & 1) {
 			set_bit(IS_CMM_ABSENT, &dev->flags);
 			rc = -ENODEV;
+		} else {
+			rc = -EIO;
 		}
-		rc = -EIO;
 		goto release_io;
 	}
 
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c
index 99cffdab105..0aeb5a38d29 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/char/pcmcia/ipwireless/hardware.c
@@ -1729,7 +1729,7 @@ void ipwireless_hardware_free(struct ipw_hardware *hw)
 
 	ipwireless_stop_interrupts(hw);
 
-	flush_scheduled_work();
+	flush_work_sync(&hw->work_rx);
 
 	for (i = 0; i < NL_NUM_OF_ADDRESSES; i++)
 		if (hw->packet_assembler[i] != NULL)
diff --git a/drivers/char/pcmcia/ipwireless/network.c b/drivers/char/pcmcia/ipwireless/network.c
index 9fe53834793..f7daeea598e 100644
--- a/drivers/char/pcmcia/ipwireless/network.c
+++ b/drivers/char/pcmcia/ipwireless/network.c
@@ -430,7 +430,8 @@ void ipwireless_network_free(struct ipw_network *network)
 	network->shutting_down = 1;
 
 	ipwireless_ppp_close(network);
-	flush_scheduled_work();
+	flush_work_sync(&network->work_go_online);
+	flush_work_sync(&network->work_go_offline);
 
 	ipwireless_stop_interrupts(network->hardware);
 	ipwireless_associate_network(network->hardware, NULL);
diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c
index 1a2c2c3b068..f5eb28b6cb0 100644
--- a/drivers/char/pcmcia/ipwireless/tty.c
+++ b/drivers/char/pcmcia/ipwireless/tty.c
@@ -577,7 +577,7 @@ void ipwireless_tty_free(struct ipw_tty *tty)
 				mutex_unlock(&ttyj->ipw_tty_mutex);
 				tty_hangup(ttyj->linux_tty);
 				/* Wait till the tty_hangup has completed */
-				flush_scheduled_work();
+				flush_work_sync(&ttyj->linux_tty->hangup_work);
 				/* FIXME: Exactly how is the tty object locked here
 				   against a parallel ioctl etc */
 				mutex_lock(&ttyj->ipw_tty_mutex);
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index bfc10f89d95..eaa41992fbe 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -2796,6 +2796,7 @@ static const struct tty_operations mgslpc_ops = {
 	.hangup = mgslpc_hangup,
 	.tiocmget = tiocmget,
 	.tiocmset = tiocmset,
+	.get_icount = mgslpc_get_icount,
 	.proc_fops = &mgslpc_proc_fops,
 };
 
diff --git a/drivers/char/ramoops.c b/drivers/char/ramoops.c
index 73dcb0ee41f..d3d63be2cd3 100644
--- a/drivers/char/ramoops.c
+++ b/drivers/char/ramoops.c
@@ -29,7 +29,6 @@
 #include <linux/ramoops.h>
 
 #define RAMOOPS_KERNMSG_HDR "===="
-#define RAMOOPS_HEADER_SIZE   (5 + sizeof(struct timeval))
 
 #define RECORD_SIZE 4096
 
@@ -65,8 +64,8 @@ static void ramoops_do_dump(struct kmsg_dumper *dumper,
 			struct ramoops_context, dump);
 	unsigned long s1_start, s2_start;
 	unsigned long l1_cpy, l2_cpy;
-	int res;
-	char *buf;
+	int res, hdr_size;
+	char *buf, *buf_orig;
 	struct timeval timestamp;
 
 	/* Only dump oopses if dump_oops is set */
@@ -74,6 +73,8 @@ static void ramoops_do_dump(struct kmsg_dumper *dumper,
 		return;
 
 	buf = (char *)(cxt->virt_addr + (cxt->count * RECORD_SIZE));
+	buf_orig = buf;
+
 	memset(buf, '\0', RECORD_SIZE);
 	res = sprintf(buf, "%s", RAMOOPS_KERNMSG_HDR);
 	buf += res;
@@ -81,8 +82,9 @@ static void ramoops_do_dump(struct kmsg_dumper *dumper,
 	res = sprintf(buf, "%lu.%lu\n", (long)timestamp.tv_sec, (long)timestamp.tv_usec);
 	buf += res;
 
-	l2_cpy = min(l2, (unsigned long)(RECORD_SIZE - RAMOOPS_HEADER_SIZE));
-	l1_cpy = min(l1, (unsigned long)(RECORD_SIZE - RAMOOPS_HEADER_SIZE) - l2_cpy);
+	hdr_size = buf - buf_orig;
+	l2_cpy = min(l2, (unsigned long)(RECORD_SIZE - hdr_size));
+	l1_cpy = min(l1, (unsigned long)(RECORD_SIZE - hdr_size) - l2_cpy);
 
 	s2_start = l2 - l2_cpy;
 	s1_start = l1 - l1_cpy;
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 5a1aa64f4e7..72a4fcb1774 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -626,7 +626,7 @@ static void add_timer_randomness(struct timer_rand_state *state, unsigned num)
 	preempt_disable();
 	/* if over the trickle threshold, use only 1 in 4096 samples */
 	if (input_pool.entropy_count > trickle_thresh &&
-	    (__get_cpu_var(trickle_count)++ & 0xfff))
+	    ((__this_cpu_inc_return(trickle_count) - 1) & 0xfff))
 		goto out;
 
 	sample.jiffies = jiffies;
diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
index 86308830ac4..3e4e73a0d7c 100644
--- a/drivers/char/rocket.c
+++ b/drivers/char/rocket.c
@@ -1764,7 +1764,7 @@ static void rp_flush_buffer(struct tty_struct *tty)
 
 #ifdef CONFIG_PCI
 
-static struct pci_device_id __devinitdata rocket_pci_ids[] = {
+static struct pci_device_id __devinitdata __used rocket_pci_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_RP, PCI_ANY_ID) },
 	{ }
 };
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index f646725bd56..748c3b0ecd8 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -52,7 +52,6 @@
 #include <linux/interrupt.h>
 #include <linux/serial.h>
 #include <linux/serialP.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/ptrace.h>
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 73f66d03624..79e36c878a4 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1434,7 +1434,7 @@ static int __devexit sonypi_remove(struct platform_device *dev)
 	sonypi_disable();
 
 	synchronize_irq(sonypi_device.irq);
-	flush_scheduled_work();
+	flush_work_sync(&sonypi_device.input_work);
 
 	if (useinput) {
 		input_unregister_device(sonypi_device.input_key_dev);
diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c
index 9f8495b4fc8..c2bca3f25ef 100644
--- a/drivers/char/specialix.c
+++ b/drivers/char/specialix.c
@@ -87,7 +87,6 @@
 #include <linux/tty_flip.h>
 #include <linux/mm.h>
 #include <linux/serial.h>
-#include <linux/smp_lock.h>
 #include <linux/fcntl.h>
 #include <linux/major.h>
 #include <linux/delay.h>
@@ -2356,7 +2355,7 @@ static void __exit specialix_exit_module(void)
 	func_exit();
 }
 
-static struct pci_device_id specialx_pci_tbl[] __devinitdata = {
+static struct pci_device_id specialx_pci_tbl[] __devinitdata __used = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SPECIALIX, PCI_DEVICE_ID_SPECIALIX_IO8) },
 	{ }
 };
diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c
index 4bef6ab8362..461a5a04551 100644
--- a/drivers/char/stallion.c
+++ b/drivers/char/stallion.c
@@ -40,7 +40,6 @@
 #include <linux/stallion.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/ctype.h>
diff --git a/drivers/char/sx.c b/drivers/char/sx.c
index e53f1686539..a786326cea2 100644
--- a/drivers/char/sx.c
+++ b/drivers/char/sx.c
@@ -216,7 +216,6 @@
 #include <linux/eisa.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/miscdevice.h>
 #include <linux/bitops.h>
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 7c4133582db..0b3af3fe676 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -986,7 +986,7 @@ int tpm_release(struct inode *inode, struct file *file)
 	struct tpm_chip *chip = file->private_data;
 
 	del_singleshot_timer_sync(&chip->user_read_timer);
-	flush_scheduled_work();
+	flush_work_sync(&chip->work);
 	file->private_data = NULL;
 	atomic_set(&chip->data_pending, 0);
 	kfree(chip->data_buffer);
@@ -1038,7 +1038,7 @@ ssize_t tpm_read(struct file *file, char __user *buf,
 	ssize_t ret_size;
 
 	del_singleshot_timer_sync(&chip->user_read_timer);
-	flush_scheduled_work();
+	flush_work_sync(&chip->work);
 	ret_size = atomic_read(&chip->data_pending);
 	atomic_set(&chip->data_pending, 0);
 	if (ret_size > 0) {	/* relay data */
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 1030f842013..c17a305ecb2 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -25,6 +25,7 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>
+#include <linux/acpi.h>
 #include "tpm.h"
 
 #define TPM_HEADER_SIZE 10
@@ -78,6 +79,26 @@ enum tis_defaults {
 static LIST_HEAD(tis_chips);
 static DEFINE_SPINLOCK(tis_lock);
 
+#ifdef CONFIG_ACPI
+static int is_itpm(struct pnp_dev *dev)
+{
+	struct acpi_device *acpi = pnp_acpi_device(dev);
+	struct acpi_hardware_id *id;
+
+	list_for_each_entry(id, &acpi->pnp.ids, list) {
+		if (!strcmp("INTC0102", id->id))
+			return 1;
+	}
+
+	return 0;
+}
+#else
+static int is_itpm(struct pnp_dev *dev)
+{
+	return 0;
+}
+#endif
+
 static int check_locality(struct tpm_chip *chip, int l)
 {
 	if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
@@ -472,6 +493,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 		 "1.2 TPM (device-id 0x%X, rev-id %d)\n",
 		 vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
 
+	if (is_itpm(to_pnp_dev(dev)))
+		itpm = 1;
+
 	if (itpm)
 		dev_info(dev, "Intel iTPM workaround enabled\n");
 
diff --git a/drivers/char/uv_mmtimer.c b/drivers/char/uv_mmtimer.c
index 493b47a0d51..956ebe2080a 100644
--- a/drivers/char/uv_mmtimer.c
+++ b/drivers/char/uv_mmtimer.c
@@ -23,7 +23,6 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/math64.h>
-#include <linux/smp_lock.h>
 
 #include <asm/genapic.h>
 #include <asm/uv/uv_hub.h>
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 6c1b676643a..896a2ced1d2 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1547,31 +1547,16 @@ static int init_vqs(struct ports_device *portdev)
 	nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2;
 
 	vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL);
-	if (!vqs) {
-		err = -ENOMEM;
-		goto fail;
-	}
 	io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL);
-	if (!io_callbacks) {
-		err = -ENOMEM;
-		goto free_vqs;
-	}
 	io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL);
-	if (!io_names) {
-		err = -ENOMEM;
-		goto free_callbacks;
-	}
 	portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
 				  GFP_KERNEL);
-	if (!portdev->in_vqs) {
-		err = -ENOMEM;
-		goto free_names;
-	}
 	portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *),
 				   GFP_KERNEL);
-	if (!portdev->out_vqs) {
+	if (!vqs || !io_callbacks || !io_names || !portdev->in_vqs ||
+			!portdev->out_vqs) {
 		err = -ENOMEM;
-		goto free_invqs;
+		goto free;
 	}
 
 	/*
@@ -1605,7 +1590,7 @@ static int init_vqs(struct ports_device *portdev)
 					      io_callbacks,
 					      (const char **)io_names);
 	if (err)
-		goto free_outvqs;
+		goto free;
 
 	j = 0;
 	portdev->in_vqs[0] = vqs[0];
@@ -1621,23 +1606,19 @@ static int init_vqs(struct ports_device *portdev)
 			portdev->out_vqs[i] = vqs[j + 1];
 		}
 	}
-	kfree(io_callbacks);
 	kfree(io_names);
+	kfree(io_callbacks);
 	kfree(vqs);
 
 	return 0;
 
-free_names:
-	kfree(io_names);
-free_callbacks:
-	kfree(io_callbacks);
-free_outvqs:
+free:
 	kfree(portdev->out_vqs);
-free_invqs:
 	kfree(portdev->in_vqs);
-free_vqs:
+	kfree(io_names);
+	kfree(io_callbacks);
 	kfree(vqs);
-fail:
+
 	return err;
 }
 
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
new file mode 100644
index 00000000000..4168c8896e1
--- /dev/null
+++ b/drivers/clk/Kconfig
@@ -0,0 +1,4 @@
+
+config CLKDEV_LOOKUP
+	bool
+	select HAVE_CLK
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
new file mode 100644
index 00000000000..07613fa172c
--- /dev/null
+++ b/drivers/clk/Makefile
@@ -0,0 +1,2 @@
+
+obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
diff --git a/arch/arm/common/clkdev.c b/drivers/clk/clkdev.c
index e2b2bb66e09..0fc0a79852d 100644
--- a/arch/arm/common/clkdev.c
+++ b/drivers/clk/clkdev.c
@@ -1,5 +1,5 @@
 /*
- *  arch/arm/common/clkdev.c
+ * drivers/clk/clkdev.c
  *
  *  Copyright (C) 2008 Russell King.
  *
@@ -18,10 +18,7 @@
 #include <linux/string.h>
 #include <linux/mutex.h>
 #include <linux/clk.h>
-#include <linux/slab.h>
-
-#include <asm/clkdev.h>
-#include <mach/clkdev.h>
+#include <linux/clkdev.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
@@ -120,12 +117,12 @@ struct clk_lookup_alloc {
 	char	con_id[MAX_CON_ID];
 };
 
-struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
-	const char *dev_fmt, ...)
+struct clk_lookup * __init_refok
+clkdev_alloc(struct clk *clk, const char *con_id, const char *dev_fmt, ...)
 {
 	struct clk_lookup_alloc *cla;
 
-	cla = kzalloc(sizeof(*cla), GFP_KERNEL);
+	cla = __clkdev_alloc(sizeof(*cla));
 	if (!cla)
 		return NULL;
 
diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
index d68d3aa1814..f975d24890f 100644
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
@@ -283,16 +283,21 @@ static void sh_cmt_clock_event_program_verify(struct sh_cmt_priv *p,
 	} while (delay);
 }
 
-static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
+static void __sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
 {
-	unsigned long flags;
-
 	if (delta > p->max_match_value)
 		dev_warn(&p->pdev->dev, "delta out of range\n");
 
-	spin_lock_irqsave(&p->lock, flags);
 	p->next_match_value = delta;
 	sh_cmt_clock_event_program_verify(p, 0);
+}
+
+static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&p->lock, flags);
+	__sh_cmt_set_next(p, delta);
 	spin_unlock_irqrestore(&p->lock, flags);
 }
 
@@ -359,7 +364,7 @@ static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag)
 
 	/* setup timeout if no clockevent */
 	if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT)))
-		sh_cmt_set_next(p, p->max_match_value);
+		__sh_cmt_set_next(p, p->max_match_value);
  out:
 	spin_unlock_irqrestore(&p->lock, flags);
 
@@ -381,7 +386,7 @@ static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag)
 
 	/* adjust the timeout to maximum if only clocksource left */
 	if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE))
-		sh_cmt_set_next(p, p->max_match_value);
+		__sh_cmt_set_next(p, p->max_match_value);
 
 	spin_unlock_irqrestore(&p->lock, flags);
 }
diff --git a/drivers/connector/cn_proc.c b/drivers/connector/cn_proc.c
index a7f046b0096..2b46a7efa0a 100644
--- a/drivers/connector/cn_proc.c
+++ b/drivers/connector/cn_proc.c
@@ -43,9 +43,10 @@ static DEFINE_PER_CPU(__u32, proc_event_counts) = { 0 };
 
 static inline void get_seq(__u32 *ts, int *cpu)
 {
-	*ts = get_cpu_var(proc_event_counts)++;
+	preempt_disable();
+	*ts = __this_cpu_inc_return(proc_event_counts) -1;
 	*cpu = smp_processor_id();
-	put_cpu_var(proc_event_counts);
+	preempt_enable();
 }
 
 void proc_fork_connector(struct task_struct *task)
diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c
index e16c3fa8d2e..05117f1ad86 100644
--- a/drivers/connector/connector.c
+++ b/drivers/connector/connector.c
@@ -36,6 +36,7 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
+MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_CONNECTOR);
 
 static struct cn_dev cdev;
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index c63a4382374..1109f6848a4 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -355,6 +355,7 @@ void cpufreq_notify_transition(struct cpufreq_freqs *freqs, unsigned int state)
 		dprintk("FREQ: %lu - CPU: %lu", (unsigned long)freqs->new,
 			(unsigned long)freqs->cpu);
 		trace_power_frequency(POWER_PSTATE, freqs->new, freqs->cpu);
+		trace_cpu_frequency(freqs->new, freqs->cpu);
 		srcu_notifier_call_chain(&cpufreq_transition_notifier_list,
 				CPUFREQ_POSTCHANGE, freqs);
 		if (likely(policy) && likely(policy->cpu == freqs->cpu))
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index a5071084337..386888f10df 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -49,7 +49,7 @@ static int __cpuidle_register_device(struct cpuidle_device *dev);
  */
 static void cpuidle_idle_call(void)
 {
-	struct cpuidle_device *dev = __get_cpu_var(cpuidle_devices);
+	struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
 	struct cpuidle_state *target_state;
 	int next_state;
 
@@ -107,6 +107,7 @@ static void cpuidle_idle_call(void)
 	if (cpuidle_curr_governor->reflect)
 		cpuidle_curr_governor->reflect(dev);
 	trace_power_end(smp_processor_id());
+	trace_cpu_idle(PWR_EVENT_EXIT, smp_processor_id());
 }
 
 /**
diff --git a/drivers/crypto/n2_core.c b/drivers/crypto/n2_core.c
index 88ee01510ec..76141262ea1 100644
--- a/drivers/crypto/n2_core.c
+++ b/drivers/crypto/n2_core.c
@@ -1832,7 +1832,7 @@ static int __devinit get_irq_props(struct mdesc_handle *mdesc, u64 node,
 		return -ENODEV;
 
 	ino = mdesc_get_property(mdesc, node, "ino", &ino_len);
-	if (!intr)
+	if (!ino)
 		return -ENODEV;
 
 	if (intr_len != ino_len)
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 2e992bc8015..8a515baa38f 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -286,7 +286,7 @@ static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key,
 	if (initial)
 		asm volatile (".byte 0xf3,0x0f,0xa7,0xd0"	/* rep xcryptcbc */
 			      : "+S" (input), "+D" (output), "+a" (iv)
-			      : "d" (control_word), "b" (key), "c" (count));
+			      : "d" (control_word), "b" (key), "c" (initial));
 
 	asm volatile (".byte 0xf3,0x0f,0xa7,0xd0"	/* rep xcryptcbc */
 		      : "+S" (input), "+D" (output), "+a" (iv)
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index a8a84f4587f..64b21f5cd74 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -1,8 +1,8 @@
 ifeq ($(CONFIG_DMADEVICES_DEBUG),y)
-	EXTRA_CFLAGS	+= -DDEBUG
+	ccflags-y	+= -DDEBUG
 endif
 ifeq ($(CONFIG_DMADEVICES_VDEBUG),y)
-	EXTRA_CFLAGS	+= -DVERBOSE_DEBUG
+	ccflags-y	+= -DVERBOSE_DEBUG
 endif
 
 obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index a0f3e6a06e0..ea0ee81cff5 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -722,7 +722,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 			desc->lli.daddr = mem;
 			desc->lli.ctrla = ctrla
 					| ATC_DST_WIDTH(mem_width)
-					| len >> mem_width;
+					| len >> reg_width;
 			desc->lli.ctrlb = ctrlb;
 
 			if (!first) {
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 286c3ac6bdc..e5e172d2169 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -50,9 +50,11 @@ static void dma_init(struct fsldma_chan *chan)
 		 * EIE - Error interrupt enable
 		 * EOSIE - End of segments interrupt enable (basic mode)
 		 * EOLNIE - End of links interrupt enable
+		 * BWC - Bandwidth sharing among channels
 		 */
-		DMA_OUT(chan, &chan->regs->mr, FSL_DMA_MR_EIE
-				| FSL_DMA_MR_EOLNIE | FSL_DMA_MR_EOSIE, 32);
+		DMA_OUT(chan, &chan->regs->mr, FSL_DMA_MR_BWC
+				| FSL_DMA_MR_EIE | FSL_DMA_MR_EOLNIE
+				| FSL_DMA_MR_EOSIE, 32);
 		break;
 	case FSL_DMA_IP_83XX:
 		/* Set the channel to below modes:
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index cb4d6ff5159..ba9f403c0fb 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc. All rights reserved.
  *
  * Author:
  *   Zhang Wei <wei.zhang@freescale.com>, Jul 2007
@@ -36,6 +36,13 @@
 #define FSL_DMA_MR_DAHE		0x00002000
 #define FSL_DMA_MR_SAHE		0x00001000
 
+/*
+ * Bandwidth/pause control determines how many bytes a given
+ * channel is allowed to transfer before the DMA engine pauses
+ * the current channel and switches to the next channel
+ */
+#define FSL_DMA_MR_BWC         0x08000000
+
 /* Special MR definition for MPC8349 */
 #define FSL_DMA_MR_EOTIE	0x00000080
 #define FSL_DMA_MR_PRC_RM	0x00000800
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index f629e4961af..e53d438142b 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -379,7 +379,7 @@ static int __init imxdma_probe(struct platform_device *pdev)
 	return 0;
 
 err_init:
-	while (i-- >= 0) {
+	while (--i >= 0) {
 		struct imxdma_channel *imxdmac = &imxdma->channel[i];
 		imx_dma_free(imxdmac->imxdma_channel);
 	}
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 0834323a059..d5a5d4d9c19 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -273,50 +273,6 @@ struct sdma_channel {
 #define MXC_SDMA_MIN_PRIORITY 1
 #define MXC_SDMA_MAX_PRIORITY 7
 
-/**
- * struct sdma_script_start_addrs - SDMA script start pointers
- *
- * start addresses of the different functions in the physical
- * address space of the SDMA engine.
- */
-struct sdma_script_start_addrs {
-	u32 ap_2_ap_addr;
-	u32 ap_2_bp_addr;
-	u32 ap_2_ap_fixed_addr;
-	u32 bp_2_ap_addr;
-	u32 loopback_on_dsp_side_addr;
-	u32 mcu_interrupt_only_addr;
-	u32 firi_2_per_addr;
-	u32 firi_2_mcu_addr;
-	u32 per_2_firi_addr;
-	u32 mcu_2_firi_addr;
-	u32 uart_2_per_addr;
-	u32 uart_2_mcu_addr;
-	u32 per_2_app_addr;
-	u32 mcu_2_app_addr;
-	u32 per_2_per_addr;
-	u32 uartsh_2_per_addr;
-	u32 uartsh_2_mcu_addr;
-	u32 per_2_shp_addr;
-	u32 mcu_2_shp_addr;
-	u32 ata_2_mcu_addr;
-	u32 mcu_2_ata_addr;
-	u32 app_2_per_addr;
-	u32 app_2_mcu_addr;
-	u32 shp_2_per_addr;
-	u32 shp_2_mcu_addr;
-	u32 mshc_2_mcu_addr;
-	u32 mcu_2_mshc_addr;
-	u32 spdif_2_mcu_addr;
-	u32 mcu_2_spdif_addr;
-	u32 asrc_2_mcu_addr;
-	u32 ext_mem_2_ipu_addr;
-	u32 descrambler_addr;
-	u32 dptc_dvfs_addr;
-	u32 utra_addr;
-	u32 ram_code_start_addr;
-};
-
 #define SDMA_FIRMWARE_MAGIC 0x414d4453
 
 /**
@@ -951,7 +907,7 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
 		struct sdma_buffer_descriptor *bd = &sdmac->bd[i];
 		int param;
 
-		bd->buffer_addr = sgl->dma_address;
+		bd->buffer_addr = sg->dma_address;
 
 		count = sg->length;
 
@@ -1127,8 +1083,74 @@ static void sdma_issue_pending(struct dma_chan *chan)
 	 */
 }
 
-static int __init sdma_init(struct sdma_engine *sdma,
-		void *ram_code, int ram_code_size)
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1	34
+
+static void sdma_add_scripts(struct sdma_engine *sdma,
+		const struct sdma_script_start_addrs *addr)
+{
+	s32 *addr_arr = (u32 *)addr;
+	s32 *saddr_arr = (u32 *)sdma->script_addrs;
+	int i;
+
+	for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++)
+		if (addr_arr[i] > 0)
+			saddr_arr[i] = addr_arr[i];
+}
+
+static int __init sdma_get_firmware(struct sdma_engine *sdma,
+		const char *cpu_name, int to_version)
+{
+	const struct firmware *fw;
+	char *fwname;
+	const struct sdma_firmware_header *header;
+	int ret;
+	const struct sdma_script_start_addrs *addr;
+	unsigned short *ram_code;
+
+	fwname = kasprintf(GFP_KERNEL, "sdma-%s-to%d.bin", cpu_name, to_version);
+	if (!fwname)
+		return -ENOMEM;
+
+	ret = request_firmware(&fw, fwname, sdma->dev);
+	if (ret) {
+		kfree(fwname);
+		return ret;
+	}
+	kfree(fwname);
+
+	if (fw->size < sizeof(*header))
+		goto err_firmware;
+
+	header = (struct sdma_firmware_header *)fw->data;
+
+	if (header->magic != SDMA_FIRMWARE_MAGIC)
+		goto err_firmware;
+	if (header->ram_code_start + header->ram_code_size > fw->size)
+		goto err_firmware;
+
+	addr = (void *)header + header->script_addrs_start;
+	ram_code = (void *)header + header->ram_code_start;
+
+	clk_enable(sdma->clk);
+	/* download the RAM image for SDMA */
+	sdma_load_script(sdma, ram_code,
+			header->ram_code_size,
+			sdma->script_addrs->ram_code_start_addr);
+	clk_disable(sdma->clk);
+
+	sdma_add_scripts(sdma, addr);
+
+	dev_info(sdma->dev, "loaded firmware %d.%d\n",
+			header->version_major,
+			header->version_minor);
+
+err_firmware:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int __init sdma_init(struct sdma_engine *sdma)
 {
 	int i, ret;
 	dma_addr_t ccb_phys;
@@ -1192,11 +1214,6 @@ static int __init sdma_init(struct sdma_engine *sdma,
 
 	__raw_writel(ccb_phys, sdma->regs + SDMA_H_C0PTR);
 
-	/* download the RAM image for SDMA */
-	sdma_load_script(sdma, ram_code,
-			ram_code_size,
-			sdma->script_addrs->ram_code_start_addr);
-
 	/* Set bits of CONFIG register with given context switching mode */
 	__raw_writel(SDMA_H_CONFIG_CSM, sdma->regs + SDMA_H_CONFIG);
 
@@ -1216,14 +1233,9 @@ err_dma_alloc:
 static int __init sdma_probe(struct platform_device *pdev)
 {
 	int ret;
-	const struct firmware *fw;
-	const struct sdma_firmware_header *header;
-	const struct sdma_script_start_addrs *addr;
 	int irq;
-	unsigned short *ram_code;
 	struct resource *iores;
 	struct sdma_platform_data *pdata = pdev->dev.platform_data;
-	char *fwname;
 	int i;
 	dma_cap_mask_t mask;
 	struct sdma_engine *sdma;
@@ -1262,38 +1274,9 @@ static int __init sdma_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_request_irq;
 
-	fwname = kasprintf(GFP_KERNEL, "sdma-%s-to%d.bin",
-			pdata->cpu_name, pdata->to_version);
-	if (!fwname) {
-		ret = -ENOMEM;
-		goto err_cputype;
-	}
-
-	ret = request_firmware(&fw, fwname, &pdev->dev);
-	if (ret) {
-		dev_err(&pdev->dev, "request firmware \"%s\" failed with %d\n",
-				fwname, ret);
-		kfree(fwname);
-		goto err_cputype;
-	}
-	kfree(fwname);
-
-	if (fw->size < sizeof(*header))
-		goto err_firmware;
-
-	header = (struct sdma_firmware_header *)fw->data;
-
-	if (header->magic != SDMA_FIRMWARE_MAGIC)
-		goto err_firmware;
-	if (header->ram_code_start + header->ram_code_size > fw->size)
-		goto err_firmware;
-
-	addr = (void *)header + header->script_addrs_start;
-	ram_code = (void *)header + header->ram_code_start;
-	sdma->script_addrs = kmalloc(sizeof(*addr), GFP_KERNEL);
+	sdma->script_addrs = kzalloc(sizeof(*sdma->script_addrs), GFP_KERNEL);
 	if (!sdma->script_addrs)
-		goto err_firmware;
-	memcpy(sdma->script_addrs, addr, sizeof(*addr));
+		goto err_alloc;
 
 	sdma->version = pdata->sdma_version;
 
@@ -1316,10 +1299,15 @@ static int __init sdma_probe(struct platform_device *pdev)
 		list_add_tail(&sdmac->chan.device_node, &sdma->dma_device.channels);
 	}
 
-	ret = sdma_init(sdma, ram_code, header->ram_code_size);
+	ret = sdma_init(sdma);
 	if (ret)
 		goto err_init;
 
+	if (pdata->script_addrs)
+		sdma_add_scripts(sdma, pdata->script_addrs);
+
+	sdma_get_firmware(sdma, pdata->cpu_name, pdata->to_version);
+
 	sdma->dma_device.dev = &pdev->dev;
 
 	sdma->dma_device.device_alloc_chan_resources = sdma_alloc_chan_resources;
@@ -1336,10 +1324,6 @@ static int __init sdma_probe(struct platform_device *pdev)
 		goto err_init;
 	}
 
-	dev_info(&pdev->dev, "initialized (firmware %d.%d)\n",
-			header->version_major,
-			header->version_minor);
-
 	/* request channel 0. This is an internal control channel
 	 * to the SDMA engine and not available to clients.
 	 */
@@ -1347,15 +1331,13 @@ static int __init sdma_probe(struct platform_device *pdev)
 	dma_cap_set(DMA_SLAVE, mask);
 	dma_request_channel(mask, NULL, NULL);
 
-	release_firmware(fw);
+	dev_info(sdma->dev, "initialized\n");
 
 	return 0;
 
 err_init:
 	kfree(sdma->script_addrs);
-err_firmware:
-	release_firmware(fw);
-err_cputype:
+err_alloc:
 	free_irq(irq, sdma);
 err_request_irq:
 	iounmap(sdma->regs);
@@ -1385,7 +1367,7 @@ static int __init sdma_module_init(void)
 {
 	return platform_driver_probe(&sdma_driver, sdma_probe);
 }
-subsys_initcall(sdma_module_init);
+module_init(sdma_module_init);
 
 MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>");
 MODULE_DESCRIPTION("i.MX SDMA driver");
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
index 338bc4eed1f..3109bd94bc4 100644
--- a/drivers/dma/intel_mid_dma.c
+++ b/drivers/dma/intel_mid_dma.c
@@ -1075,7 +1075,6 @@ static int mid_setup_dma(struct pci_dev *pdev)
 	if (NULL == dma->dma_pool) {
 		pr_err("ERR_MDMA:pci_pool_create failed\n");
 		err = -ENOMEM;
-		kfree(dma);
 		goto err_dma_pool;
 	}
 
@@ -1186,7 +1185,6 @@ err_engine:
 	free_irq(pdev->irq, dma);
 err_irq:
 	pci_pool_destroy(dma->dma_pool);
-	kfree(dma);
 err_dma_pool:
 	pr_err("ERR_MDMA:setup_dma failed: %d\n", err);
 	return err;
@@ -1413,7 +1411,7 @@ static const struct dev_pm_ops intel_mid_dma_pm = {
 	.runtime_idle = dma_runtime_idle,
 };
 
-static struct pci_driver intel_mid_dma_pci = {
+static struct pci_driver intel_mid_dma_pci_driver = {
 	.name		=	"Intel MID DMA",
 	.id_table	=	intel_mid_dma_ids,
 	.probe		=	intel_mid_dma_probe,
@@ -1431,13 +1429,13 @@ static int __init intel_mid_dma_init(void)
 {
 	pr_debug("INFO_MDMA: LNW DMA Driver Version %s\n",
 			INTEL_MID_DMA_DRIVER_VERSION);
-	return pci_register_driver(&intel_mid_dma_pci);
+	return pci_register_driver(&intel_mid_dma_pci_driver);
 }
 fs_initcall(intel_mid_dma_init);
 
 static void __exit intel_mid_dma_exit(void)
 {
-	pci_unregister_driver(&intel_mid_dma_pci);
+	pci_unregister_driver(&intel_mid_dma_pci_driver);
 }
 module_exit(intel_mid_dma_exit);
 
diff --git a/drivers/dma/ioat/Makefile b/drivers/dma/ioat/Makefile
index 8997d3fb905..0ff7270af25 100644
--- a/drivers/dma/ioat/Makefile
+++ b/drivers/dma/ioat/Makefile
@@ -1,2 +1,2 @@
 obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
-ioatdma-objs := pci.o dma.o dma_v2.o dma_v3.o dca.o
+ioatdma-y := pci.o dma.o dma_v2.o dma_v3.o dca.o
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 411d5bf50fc..a25f5f61e0e 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -449,7 +449,7 @@ mv_xor_slot_cleanup(struct mv_xor_chan *mv_chan)
 static void mv_xor_tasklet(unsigned long data)
 {
 	struct mv_xor_chan *chan = (struct mv_xor_chan *) data;
-	__mv_xor_slot_cleanup(chan);
+	mv_xor_slot_cleanup(chan);
 }
 
 static struct mv_xor_desc_slot *
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 92b679024fe..c064c89420d 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -259,11 +259,6 @@ static void pdc_dostart(struct pch_dma_chan *pd_chan, struct pch_dma_desc* desc)
 		return;
 	}
 
-	channel_writel(pd_chan, DEV_ADDR, desc->regs.dev_addr);
-	channel_writel(pd_chan, MEM_ADDR, desc->regs.mem_addr);
-	channel_writel(pd_chan, SIZE, desc->regs.size);
-	channel_writel(pd_chan, NEXT, desc->regs.next);
-
 	dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> dev_addr: %x\n",
 		pd_chan->chan.chan_id, desc->regs.dev_addr);
 	dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> mem_addr: %x\n",
@@ -273,10 +268,16 @@ static void pdc_dostart(struct pch_dma_chan *pd_chan, struct pch_dma_desc* desc)
 	dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> next: %x\n",
 		pd_chan->chan.chan_id, desc->regs.next);
 
-	if (list_empty(&desc->tx_list))
+	if (list_empty(&desc->tx_list)) {
+		channel_writel(pd_chan, DEV_ADDR, desc->regs.dev_addr);
+		channel_writel(pd_chan, MEM_ADDR, desc->regs.mem_addr);
+		channel_writel(pd_chan, SIZE, desc->regs.size);
+		channel_writel(pd_chan, NEXT, desc->regs.next);
 		pdc_set_mode(&pd_chan->chan, DMA_CTL0_ONESHOT);
-	else
+	} else {
+		channel_writel(pd_chan, NEXT, desc->txd.phys);
 		pdc_set_mode(&pd_chan->chan, DMA_CTL0_SG);
+	}
 
 	val = dma_readl(pd, CTL2);
 	val |= 1 << (DMA_CTL2_START_SHIFT_BITS + pd_chan->chan.chan_id);
diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
index 0d58a4a4487..cef584533ee 100644
--- a/drivers/dma/ppc4xx/adma.c
+++ b/drivers/dma/ppc4xx/adma.c
@@ -4449,9 +4449,8 @@ static int __devinit ppc440spe_adma_probe(struct platform_device *ofdev,
 
 	if (!request_mem_region(res.start, resource_size(&res),
 				dev_driver_string(&ofdev->dev))) {
-		dev_err(&ofdev->dev, "failed to request memory region "
-			"(0x%016llx-0x%016llx)\n",
-			(u64)res.start, (u64)res.end);
+		dev_err(&ofdev->dev, "failed to request memory region %pR\n",
+			&res);
 		initcode = PPC_ADMA_INIT_MEMREG;
 		ret = -EBUSY;
 		goto out;
diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index eb6b54dbb80..28720d3103c 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -27,7 +27,10 @@
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/sh_dma.h>
-
+#include <linux/notifier.h>
+#include <linux/kdebug.h>
+#include <linux/spinlock.h>
+#include <linux/rculist.h>
 #include "shdma.h"
 
 /* DMA descriptor control */
@@ -43,6 +46,13 @@ enum sh_dmae_desc_status {
 /* Default MEMCPY transfer size = 2^2 = 4 bytes */
 #define LOG2_DEFAULT_XFER_SIZE	2
 
+/*
+ * Used for write-side mutual exclusion for the global device list,
+ * read-side synchronization by way of RCU.
+ */
+static DEFINE_SPINLOCK(sh_dmae_lock);
+static LIST_HEAD(sh_dmae_devices);
+
 /* A bitmask with bits enough for enum sh_dmae_slave_chan_id */
 static unsigned long sh_dmae_slave_used[BITS_TO_LONGS(SH_DMA_SLAVE_NUMBER)];
 
@@ -817,10 +827,9 @@ static irqreturn_t sh_dmae_interrupt(int irq, void *data)
 	return ret;
 }
 
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
-static irqreturn_t sh_dmae_err(int irq, void *data)
+static unsigned int sh_dmae_reset(struct sh_dmae_device *shdev)
 {
-	struct sh_dmae_device *shdev = (struct sh_dmae_device *)data;
+	unsigned int handled = 0;
 	int i;
 
 	/* halt the dma controller */
@@ -829,25 +838,35 @@ static irqreturn_t sh_dmae_err(int irq, void *data)
 	/* We cannot detect, which channel caused the error, have to reset all */
 	for (i = 0; i < SH_DMAC_MAX_CHANNELS; i++) {
 		struct sh_dmae_chan *sh_chan = shdev->chan[i];
-		if (sh_chan) {
-			struct sh_desc *desc;
-			/* Stop the channel */
-			dmae_halt(sh_chan);
-			/* Complete all  */
-			list_for_each_entry(desc, &sh_chan->ld_queue, node) {
-				struct dma_async_tx_descriptor *tx = &desc->async_tx;
-				desc->mark = DESC_IDLE;
-				if (tx->callback)
-					tx->callback(tx->callback_param);
-			}
-			list_splice_init(&sh_chan->ld_queue, &sh_chan->ld_free);
+		struct sh_desc *desc;
+
+		if (!sh_chan)
+			continue;
+
+		/* Stop the channel */
+		dmae_halt(sh_chan);
+
+		/* Complete all  */
+		list_for_each_entry(desc, &sh_chan->ld_queue, node) {
+			struct dma_async_tx_descriptor *tx = &desc->async_tx;
+			desc->mark = DESC_IDLE;
+			if (tx->callback)
+				tx->callback(tx->callback_param);
 		}
+
+		list_splice_init(&sh_chan->ld_queue, &sh_chan->ld_free);
+		handled++;
 	}
+
 	sh_dmae_rst(shdev);
 
-	return IRQ_HANDLED;
+	return !!handled;
+}
+
+static irqreturn_t sh_dmae_err(int irq, void *data)
+{
+	return IRQ_RETVAL(sh_dmae_reset(data));
 }
-#endif
 
 static void dmae_do_tasklet(unsigned long data)
 {
@@ -876,6 +895,60 @@ static void dmae_do_tasklet(unsigned long data)
 	sh_dmae_chan_ld_cleanup(sh_chan, false);
 }
 
+static bool sh_dmae_nmi_notify(struct sh_dmae_device *shdev)
+{
+	unsigned int handled;
+
+	/* Fast path out if NMIF is not asserted for this controller */
+	if ((dmaor_read(shdev) & DMAOR_NMIF) == 0)
+		return false;
+
+	handled = sh_dmae_reset(shdev);
+	if (handled)
+		return true;
+
+	return false;
+}
+
+static int sh_dmae_nmi_handler(struct notifier_block *self,
+			       unsigned long cmd, void *data)
+{
+	struct sh_dmae_device *shdev;
+	int ret = NOTIFY_DONE;
+	bool triggered;
+
+	/*
+	 * Only concern ourselves with NMI events.
+	 *
+	 * Normally we would check the die chain value, but as this needs
+	 * to be architecture independent, check for NMI context instead.
+	 */
+	if (!in_nmi())
+		return NOTIFY_DONE;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(shdev, &sh_dmae_devices, node) {
+		/*
+		 * Only stop if one of the controllers has NMIF asserted,
+		 * we do not want to interfere with regular address error
+		 * handling or NMI events that don't concern the DMACs.
+		 */
+		triggered = sh_dmae_nmi_notify(shdev);
+		if (triggered == true)
+			ret = NOTIFY_OK;
+	}
+	rcu_read_unlock();
+
+	return ret;
+}
+
+static struct notifier_block sh_dmae_nmi_notifier __read_mostly = {
+	.notifier_call	= sh_dmae_nmi_handler,
+
+	/* Run before NMI debug handler and KGDB */
+	.priority	= 1,
+};
+
 static int __devinit sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id,
 					int irq, unsigned long flags)
 {
@@ -967,6 +1040,7 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
 	struct sh_dmae_pdata *pdata = pdev->dev.platform_data;
 	unsigned long irqflags = IRQF_DISABLED,
 		chan_flag[SH_DMAC_MAX_CHANNELS] = {};
+	unsigned long flags;
 	int errirq, chan_irq[SH_DMAC_MAX_CHANNELS];
 	int err, i, irq_cnt = 0, irqres = 0;
 	struct sh_dmae_device *shdev;
@@ -1032,6 +1106,10 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_get_sync(&pdev->dev);
 
+	spin_lock_irqsave(&sh_dmae_lock, flags);
+	list_add_tail_rcu(&shdev->node, &sh_dmae_devices);
+	spin_unlock_irqrestore(&sh_dmae_lock, flags);
+
 	/* reset dma controller */
 	err = sh_dmae_rst(shdev);
 	if (err)
@@ -1135,6 +1213,10 @@ eirqres:
 eirq_err:
 #endif
 rst_err:
+	spin_lock_irqsave(&sh_dmae_lock, flags);
+	list_del_rcu(&shdev->node);
+	spin_unlock_irqrestore(&sh_dmae_lock, flags);
+
 	pm_runtime_put(&pdev->dev);
 	if (dmars)
 		iounmap(shdev->dmars);
@@ -1155,6 +1237,7 @@ static int __exit sh_dmae_remove(struct platform_device *pdev)
 {
 	struct sh_dmae_device *shdev = platform_get_drvdata(pdev);
 	struct resource *res;
+	unsigned long flags;
 	int errirq = platform_get_irq(pdev, 0);
 
 	dma_async_device_unregister(&shdev->common);
@@ -1162,6 +1245,10 @@ static int __exit sh_dmae_remove(struct platform_device *pdev)
 	if (errirq > 0)
 		free_irq(errirq, shdev);
 
+	spin_lock_irqsave(&sh_dmae_lock, flags);
+	list_del_rcu(&shdev->node);
+	spin_unlock_irqrestore(&sh_dmae_lock, flags);
+
 	/* channel data remove */
 	sh_dmae_chan_remove(shdev);
 
@@ -1200,6 +1287,11 @@ static struct platform_driver sh_dmae_driver = {
 
 static int __init sh_dmae_init(void)
 {
+	/* Wire up NMI handling */
+	int err = register_die_notifier(&sh_dmae_nmi_notifier);
+	if (err)
+		return err;
+
 	return platform_driver_probe(&sh_dmae_driver, sh_dmae_probe);
 }
 module_init(sh_dmae_init);
@@ -1207,9 +1299,12 @@ module_init(sh_dmae_init);
 static void __exit sh_dmae_exit(void)
 {
 	platform_driver_unregister(&sh_dmae_driver);
+
+	unregister_die_notifier(&sh_dmae_nmi_notifier);
 }
 module_exit(sh_dmae_exit);
 
 MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
 MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sh-dma-engine");
diff --git a/drivers/dma/shdma.h b/drivers/dma/shdma.h
index 4021275a0a4..52e4fb17380 100644
--- a/drivers/dma/shdma.h
+++ b/drivers/dma/shdma.h
@@ -43,6 +43,7 @@ struct sh_dmae_device {
 	struct dma_device common;
 	struct sh_dmae_chan *chan[SH_DMAC_MAX_CHANNELS];
 	struct sh_dmae_pdata *pdata;
+	struct list_head node;
 	u32 __iomem *chan_reg;
 	u16 __iomem *dmars;
 };
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index f436a2fa9f3..fe70a341bd8 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -75,11 +75,11 @@ config EDAC_MCE
 	bool
 
 config EDAC_AMD64
-	tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
-	depends on EDAC_MM_EDAC && AMD_NB && X86_64 && PCI && EDAC_DECODE_MCE
+	tristate "AMD64 (Opteron, Athlon64) K8, F10h"
+	depends on EDAC_MM_EDAC && AMD_NB && X86_64 && EDAC_DECODE_MCE
 	help
-	  Support for error detection and correction on the AMD 64
-	  Families of Memory Controllers (K8, F10h and F11h)
+	  Support for error detection and correction of DRAM ECC errors on
+	  the AMD64 families of memory controllers (K8 and F10h)
 
 config EDAC_AMD64_ERROR_INJECTION
 	bool "Sysfs HW Error injection facilities"
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index b3781399b38..ba2898b3639 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -10,16 +10,16 @@ obj-$(CONFIG_EDAC)			:= edac_stub.o
 obj-$(CONFIG_EDAC_MM_EDAC)		+= edac_core.o
 obj-$(CONFIG_EDAC_MCE)			+= edac_mce.o
 
-edac_core-objs	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
-edac_core-objs	+= edac_module.o edac_device_sysfs.o
+edac_core-y	:= edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
+edac_core-y	+= edac_module.o edac_device_sysfs.o
 
 ifdef CONFIG_PCI
-edac_core-objs	+= edac_pci.o edac_pci_sysfs.o
+edac_core-y	+= edac_pci.o edac_pci_sysfs.o
 endif
 
 obj-$(CONFIG_EDAC_MCE_INJ)		+= mce_amd_inj.o
 
-edac_mce_amd-objs			:= mce_amd.o
+edac_mce_amd-y				:= mce_amd.o
 obj-$(CONFIG_EDAC_DECODE_MCE)		+= edac_mce_amd.o
 
 obj-$(CONFIG_EDAC_AMD76X)		+= amd76x_edac.o
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 8521401bbd7..4a5ecc58025 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -15,10 +15,14 @@ module_param(ecc_enable_override, int, 0644);
 
 static struct msr __percpu *msrs;
 
-/* Lookup table for all possible MC control instances */
-struct amd64_pvt;
-static struct mem_ctl_info *mci_lookup[EDAC_MAX_NUMNODES];
-static struct amd64_pvt *pvt_lookup[EDAC_MAX_NUMNODES];
+/*
+ * count successfully initialized driver instances for setup_pci_device()
+ */
+static atomic_t drv_instances = ATOMIC_INIT(0);
+
+/* Per-node driver instances */
+static struct mem_ctl_info **mcis;
+static struct ecc_settings **ecc_stngs;
 
 /*
  * Address to DRAM bank mapping: see F2x80 for K8 and F2x[1,0]80 for Fam10 and
@@ -62,7 +66,7 @@ static int ddr3_dbam[] = { [0]		= -1,
 			   [5 ... 6]	= 1024,
 			   [7 ... 8]	= 2048,
 			   [9 ... 10]	= 4096,
-			   [11]	= 8192,
+			   [11]		= 8192,
 };
 
 /*
@@ -73,7 +77,11 @@ static int ddr3_dbam[] = { [0]		= -1,
  *FIXME: Produce a better mapping/linearisation.
  */
 
-struct scrubrate scrubrates[] = {
+
+struct scrubrate {
+       u32 scrubval;           /* bit pattern for scrub rate */
+       u32 bandwidth;          /* bandwidth consumed (bytes/sec) */
+} scrubrates[] = {
 	{ 0x01, 1600000000UL},
 	{ 0x02, 800000000UL},
 	{ 0x03, 400000000UL},
@@ -117,8 +125,7 @@ struct scrubrate scrubrates[] = {
  * scan the scrub rate mapping table for a close or matching bandwidth value to
  * issue. If requested is too big, then use last maximum value found.
  */
-static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw,
-				       u32 min_scrubrate)
+static int __amd64_set_scrub_rate(struct pci_dev *ctl, u32 new_bw, u32 min_rate)
 {
 	u32 scrubval;
 	int i;
@@ -134,7 +141,7 @@ static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw,
 		 * skip scrub rates which aren't recommended
 		 * (see F10 BKDG, F3x58)
 		 */
-		if (scrubrates[i].scrubval < min_scrubrate)
+		if (scrubrates[i].scrubval < min_rate)
 			continue;
 
 		if (scrubrates[i].bandwidth <= new_bw)
@@ -148,64 +155,41 @@ static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw,
 	}
 
 	scrubval = scrubrates[i].scrubval;
-	if (scrubval)
-		edac_printk(KERN_DEBUG, EDAC_MC,
-			    "Setting scrub rate bandwidth: %u\n",
-			    scrubrates[i].bandwidth);
-	else
-		edac_printk(KERN_DEBUG, EDAC_MC, "Turning scrubbing off.\n");
 
 	pci_write_bits32(ctl, K8_SCRCTRL, scrubval, 0x001F);
 
+	if (scrubval)
+		return scrubrates[i].bandwidth;
+
 	return 0;
 }
 
-static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
+static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bw)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
-	u32 min_scrubrate = 0x0;
-
-	switch (boot_cpu_data.x86) {
-	case 0xf:
-		min_scrubrate = K8_MIN_SCRUB_RATE_BITS;
-		break;
-	case 0x10:
-		min_scrubrate = F10_MIN_SCRUB_RATE_BITS;
-		break;
-	case 0x11:
-		min_scrubrate = F11_MIN_SCRUB_RATE_BITS;
-		break;
 
-	default:
-		amd64_printk(KERN_ERR, "Unsupported family!\n");
-		return -EINVAL;
-	}
-	return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, bandwidth,
-					   min_scrubrate);
+	return __amd64_set_scrub_rate(pvt->F3, bw, pvt->min_scrubrate);
 }
 
-static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+static int amd64_get_scrub_rate(struct mem_ctl_info *mci)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
 	u32 scrubval = 0;
-	int status = -1, i;
+	int i, retval = -EINVAL;
 
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_SCRCTRL, &scrubval);
+	amd64_read_pci_cfg(pvt->F3, K8_SCRCTRL, &scrubval);
 
 	scrubval = scrubval & 0x001F;
 
-	edac_printk(KERN_DEBUG, EDAC_MC,
-		    "pci-read, sdram scrub control value: %d \n", scrubval);
+	amd64_debug("pci-read, sdram scrub control value: %d\n", scrubval);
 
 	for (i = 0; i < ARRAY_SIZE(scrubrates); i++) {
 		if (scrubrates[i].scrubval == scrubval) {
-			*bw = scrubrates[i].bandwidth;
-			status = 0;
+			retval = scrubrates[i].bandwidth;
 			break;
 		}
 	}
-
-	return status;
+	return retval;
 }
 
 /* Map from a CSROW entry to the mask entry that operates on it */
@@ -314,9 +298,7 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
 	if (unlikely((intlv_en != 0x01) &&
 		     (intlv_en != 0x03) &&
 		     (intlv_en != 0x07))) {
-		amd64_printk(KERN_WARNING, "junk value of 0x%x extracted from "
-			     "IntlvEn field of DRAM Base Register for node 0: "
-			     "this probably indicates a BIOS bug.\n", intlv_en);
+		amd64_warn("DRAM Base[IntlvEn] junk value: 0x%x, BIOS bug?\n", intlv_en);
 		return NULL;
 	}
 
@@ -332,11 +314,9 @@ static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci,
 
 	/* sanity test for sys_addr */
 	if (unlikely(!amd64_base_limit_match(pvt, sys_addr, node_id))) {
-		amd64_printk(KERN_WARNING,
-			     "%s(): sys_addr 0x%llx falls outside base/limit "
-			     "address range for node %d with node interleaving "
-			     "enabled.\n",
-			     __func__, sys_addr, node_id);
+		amd64_warn("%s: sys_addr 0x%llx falls outside base/limit address"
+			   "range for node %d with node interleaving enabled.\n",
+			   __func__, sys_addr, node_id);
 		return NULL;
 	}
 
@@ -788,9 +768,8 @@ static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr)
 	csrow = input_addr_to_csrow(mci, sys_addr_to_input_addr(mci, sys_addr));
 
 	if (csrow == -1)
-		amd64_mc_printk(mci, KERN_ERR,
-			     "Failed to translate InputAddr to csrow for "
-			     "address 0x%lx\n", (unsigned long)sys_addr);
+		amd64_mc_err(mci, "Failed to translate InputAddr to csrow for "
+				  "address 0x%lx\n", (unsigned long)sys_addr);
 	return csrow;
 }
 
@@ -801,21 +780,6 @@ static u16 extract_syndrome(struct err_regs *err)
 	return ((err->nbsh >> 15) & 0xff) | ((err->nbsl >> 16) & 0xff00);
 }
 
-static void amd64_cpu_display_info(struct amd64_pvt *pvt)
-{
-	if (boot_cpu_data.x86 == 0x11)
-		edac_printk(KERN_DEBUG, EDAC_MC, "F11h CPU detected\n");
-	else if (boot_cpu_data.x86 == 0x10)
-		edac_printk(KERN_DEBUG, EDAC_MC, "F10h CPU detected\n");
-	else if (boot_cpu_data.x86 == 0xf)
-		edac_printk(KERN_DEBUG, EDAC_MC, "%s detected\n",
-			(pvt->ext_model >= K8_REV_F) ?
-			"Rev F or later" : "Rev E or earlier");
-	else
-		/* we'll hardly ever ever get here */
-		edac_printk(KERN_ERR, EDAC_MC, "Unknown cpu!\n");
-}
-
 /*
  * Determine if the DIMMs have ECC enabled. ECC is enabled ONLY if all the DIMMs
  * are ECC capable.
@@ -893,8 +857,7 @@ static void amd64_dump_misc_regs(struct amd64_pvt *pvt)
 		return;
 	}
 
-	amd64_printk(KERN_INFO, "using %s syndromes.\n",
-		     ((pvt->syn_type == 8) ? "x8" : "x4"));
+	amd64_info("using %s syndromes.\n", ((pvt->syn_type == 8) ? "x8" : "x4"));
 
 	/* Only if NOT ganged does dclr1 have valid info */
 	if (!dct_ganging_enabled(pvt))
@@ -915,10 +878,10 @@ static void amd64_dump_misc_regs(struct amd64_pvt *pvt)
 /* Read in both of DBAM registers */
 static void amd64_read_dbam_reg(struct amd64_pvt *pvt)
 {
-	amd64_read_pci_cfg(pvt->dram_f2_ctl, DBAM0, &pvt->dbam0);
+	amd64_read_pci_cfg(pvt->F2, DBAM0, &pvt->dbam0);
 
 	if (boot_cpu_data.x86 >= 0x10)
-		amd64_read_pci_cfg(pvt->dram_f2_ctl, DBAM1, &pvt->dbam1);
+		amd64_read_pci_cfg(pvt->F2, DBAM1, &pvt->dbam1);
 }
 
 /*
@@ -965,14 +928,8 @@ static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt)
 		pvt->dcsm_mask		= REV_F_F1Xh_DCSM_MASK_BITS;
 		pvt->dcs_mask_notused	= REV_F_F1Xh_DCS_NOTUSED_BITS;
 		pvt->dcs_shift		= REV_F_F1Xh_DCS_SHIFT;
-
-		if (boot_cpu_data.x86 == 0x11) {
-			pvt->cs_count = 4;
-			pvt->num_dcsm = 2;
-		} else {
-			pvt->cs_count = 8;
-			pvt->num_dcsm = 4;
-		}
+		pvt->cs_count		= 8;
+		pvt->num_dcsm		= 4;
 	}
 }
 
@@ -987,14 +944,14 @@ static void amd64_read_dct_base_mask(struct amd64_pvt *pvt)
 
 	for (cs = 0; cs < pvt->cs_count; cs++) {
 		reg = K8_DCSB0 + (cs * 4);
-		if (!amd64_read_pci_cfg(pvt->dram_f2_ctl, reg, &pvt->dcsb0[cs]))
+		if (!amd64_read_pci_cfg(pvt->F2, reg, &pvt->dcsb0[cs]))
 			debugf0("  DCSB0[%d]=0x%08x reg: F2x%x\n",
 				cs, pvt->dcsb0[cs], reg);
 
 		/* If DCT are NOT ganged, then read in DCT1's base */
 		if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) {
 			reg = F10_DCSB1 + (cs * 4);
-			if (!amd64_read_pci_cfg(pvt->dram_f2_ctl, reg,
+			if (!amd64_read_pci_cfg(pvt->F2, reg,
 						&pvt->dcsb1[cs]))
 				debugf0("  DCSB1[%d]=0x%08x reg: F2x%x\n",
 					cs, pvt->dcsb1[cs], reg);
@@ -1005,14 +962,14 @@ static void amd64_read_dct_base_mask(struct amd64_pvt *pvt)
 
 	for (cs = 0; cs < pvt->num_dcsm; cs++) {
 		reg = K8_DCSM0 + (cs * 4);
-		if (!amd64_read_pci_cfg(pvt->dram_f2_ctl, reg, &pvt->dcsm0[cs]))
+		if (!amd64_read_pci_cfg(pvt->F2, reg, &pvt->dcsm0[cs]))
 			debugf0("    DCSM0[%d]=0x%08x reg: F2x%x\n",
 				cs, pvt->dcsm0[cs], reg);
 
 		/* If DCT are NOT ganged, then read in DCT1's mask */
 		if (boot_cpu_data.x86 >= 0x10 && !dct_ganging_enabled(pvt)) {
 			reg = F10_DCSM1 + (cs * 4);
-			if (!amd64_read_pci_cfg(pvt->dram_f2_ctl, reg,
+			if (!amd64_read_pci_cfg(pvt->F2, reg,
 						&pvt->dcsm1[cs]))
 				debugf0("    DCSM1[%d]=0x%08x reg: F2x%x\n",
 					cs, pvt->dcsm1[cs], reg);
@@ -1022,7 +979,7 @@ static void amd64_read_dct_base_mask(struct amd64_pvt *pvt)
 	}
 }
 
-static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt)
+static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt, int cs)
 {
 	enum mem_type type;
 
@@ -1035,7 +992,7 @@ static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt)
 		type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
 	}
 
-	debugf1("  Memory type is: %s\n", edac_mem_types[type]);
+	amd64_info("CS%d: %s\n", cs, edac_mem_types[type]);
 
 	return type;
 }
@@ -1053,17 +1010,16 @@ static int k8_early_channel_count(struct amd64_pvt *pvt)
 {
 	int flag, err = 0;
 
-	err = amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
+	err = amd64_read_pci_cfg(pvt->F2, F10_DCLR_0, &pvt->dclr0);
 	if (err)
 		return err;
 
-	if ((boot_cpu_data.x86_model >> 4) >= K8_REV_F) {
+	if (pvt->ext_model >= K8_REV_F)
 		/* RevF (NPT) and later */
 		flag = pvt->dclr0 & F10_WIDTH_128;
-	} else {
+	else
 		/* RevE and earlier */
 		flag = pvt->dclr0 & REVE_WIDTH_128;
-	}
 
 	/* not used */
 	pvt->dclr1 = 0;
@@ -1090,14 +1046,14 @@ static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 	u32 low;
 	u32 off = dram << 3;	/* 8 bytes between DRAM entries */
 
-	amd64_read_pci_cfg(pvt->addr_f1_ctl, K8_DRAM_BASE_LOW + off, &low);
+	amd64_read_pci_cfg(pvt->F1, K8_DRAM_BASE_LOW + off, &low);
 
 	/* Extract parts into separate data entries */
 	pvt->dram_base[dram] = ((u64) low & 0xFFFF0000) << 8;
 	pvt->dram_IntlvEn[dram] = (low >> 8) & 0x7;
 	pvt->dram_rw_en[dram] = (low & 0x3);
 
-	amd64_read_pci_cfg(pvt->addr_f1_ctl, K8_DRAM_LIMIT_LOW + off, &low);
+	amd64_read_pci_cfg(pvt->F1, K8_DRAM_LIMIT_LOW + off, &low);
 
 	/*
 	 * Extract parts into separate data entries. Limit is the HIGHEST memory
@@ -1127,9 +1083,8 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
 			 * 2 DIMMs is in error. So we need to ID 'both' of them
 			 * as suspect.
 			 */
-			amd64_mc_printk(mci, KERN_WARNING,
-					"unknown syndrome 0x%04x - possible "
-					"error reporting race\n", syndrome);
+			amd64_mc_warn(mci, "unknown syndrome 0x%04x - possible "
+					   "error reporting race\n", syndrome);
 			edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
 			return;
 		}
@@ -1151,8 +1106,7 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
 	 */
 	src_mci = find_mc_by_sys_addr(mci, sys_addr);
 	if (!src_mci) {
-		amd64_mc_printk(mci, KERN_ERR,
-			     "failed to map error address 0x%lx to a node\n",
+		amd64_mc_err(mci, "failed to map error addr 0x%lx to a node\n",
 			     (unsigned long)sys_addr);
 		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
 		return;
@@ -1220,7 +1174,7 @@ static int f10_early_channel_count(struct amd64_pvt *pvt)
 	 * both controllers since DIMMs can be placed in either one.
 	 */
 	for (i = 0; i < ARRAY_SIZE(dbams); i++) {
-		if (amd64_read_pci_cfg(pvt->dram_f2_ctl, dbams[i], &dbam))
+		if (amd64_read_pci_cfg(pvt->F2, dbams[i], &dbam))
 			goto err_reg;
 
 		for (j = 0; j < 4; j++) {
@@ -1234,7 +1188,7 @@ static int f10_early_channel_count(struct amd64_pvt *pvt)
 	if (channels > 2)
 		channels = 2;
 
-	debugf0("MCT channel count: %d\n", channels);
+	amd64_info("MCT channel count: %d\n", channels);
 
 	return channels;
 
@@ -1255,31 +1209,6 @@ static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode)
 	return dbam_map[cs_mode];
 }
 
-/* Enable extended configuration access via 0xCF8 feature */
-static void amd64_setup(struct amd64_pvt *pvt)
-{
-	u32 reg;
-
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, &reg);
-
-	pvt->flags.cf8_extcfg = !!(reg & F10_NB_CFG_LOW_ENABLE_EXT_CFG);
-	reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG;
-	pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg);
-}
-
-/* Restore the extended configuration access via 0xCF8 feature */
-static void amd64_teardown(struct amd64_pvt *pvt)
-{
-	u32 reg;
-
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, &reg);
-
-	reg &= ~F10_NB_CFG_LOW_ENABLE_EXT_CFG;
-	if (pvt->flags.cf8_extcfg)
-		reg |= F10_NB_CFG_LOW_ENABLE_EXT_CFG;
-	pci_write_config_dword(pvt->misc_f3_ctl, F10_NB_CFG_HIGH, reg);
-}
-
 static u64 f10_get_error_address(struct mem_ctl_info *mci,
 			struct err_regs *info)
 {
@@ -1301,10 +1230,8 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 	high_offset = F10_DRAM_BASE_HIGH + (dram << 3);
 
 	/* read the 'raw' DRAM BASE Address register */
-	amd64_read_pci_cfg(pvt->addr_f1_ctl, low_offset, &low_base);
-
-	/* Read from the ECS data register */
-	amd64_read_pci_cfg(pvt->addr_f1_ctl, high_offset, &high_base);
+	amd64_read_pci_cfg(pvt->F1, low_offset, &low_base);
+	amd64_read_pci_cfg(pvt->F1, high_offset, &high_base);
 
 	/* Extract parts into separate data entries */
 	pvt->dram_rw_en[dram] = (low_base & 0x3);
@@ -1321,10 +1248,8 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 	high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
 
 	/* read the 'raw' LIMIT registers */
-	amd64_read_pci_cfg(pvt->addr_f1_ctl, low_offset, &low_limit);
-
-	/* Read from the ECS data register for the HIGH portion */
-	amd64_read_pci_cfg(pvt->addr_f1_ctl, high_offset, &high_limit);
+	amd64_read_pci_cfg(pvt->F1, low_offset, &low_limit);
+	amd64_read_pci_cfg(pvt->F1, high_offset, &high_limit);
 
 	pvt->dram_DstNode[dram] = (low_limit & 0x7);
 	pvt->dram_IntlvSel[dram] = (low_limit >> 8) & 0x7;
@@ -1341,7 +1266,7 @@ static void f10_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
 {
 
-	if (!amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCTL_SEL_LOW,
+	if (!amd64_read_pci_cfg(pvt->F2, F10_DCTL_SEL_LOW,
 				&pvt->dram_ctl_select_low)) {
 		debugf0("F2x110 (DCTL Sel. Low): 0x%08x, "
 			"High range addresses at: 0x%x\n",
@@ -1367,7 +1292,7 @@ static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
 			dct_sel_interleave_addr(pvt));
 	}
 
-	amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCTL_SEL_HIGH,
+	amd64_read_pci_cfg(pvt->F2, F10_DCTL_SEL_HIGH,
 			   &pvt->dram_ctl_select_high);
 }
 
@@ -1496,7 +1421,7 @@ static int f10_lookup_addr_in_dct(u32 in_addr, u32 nid, u32 cs)
 	int cs_found = -EINVAL;
 	int csrow;
 
-	mci = mci_lookup[nid];
+	mci = mcis[nid];
 	if (!mci)
 		return cs_found;
 
@@ -1572,7 +1497,7 @@ static int f10_match_to_this_node(struct amd64_pvt *pvt, int dram_range,
 	debugf1("   HoleOffset=0x%x  HoleValid=0x%x IntlvSel=0x%x\n",
 			hole_off, hole_valid, intlv_sel);
 
-	if (intlv_en ||
+	if (intlv_en &&
 	    (intlv_sel != ((sys_addr >> 12) & intlv_en)))
 		return -EINVAL;
 
@@ -1738,28 +1663,17 @@ static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt)
 		if (dcsb[dimm*2 + 1] & K8_DCSB_CS_ENABLE)
 			size1 = pvt->ops->dbam_to_cs(pvt, DBAM_DIMM(dimm, dbam));
 
-		edac_printk(KERN_DEBUG, EDAC_MC, " %d: %5dMB %d: %5dMB\n",
-			    dimm * 2,     size0 << factor,
-			    dimm * 2 + 1, size1 << factor);
+		amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n",
+				dimm * 2,     size0 << factor,
+				dimm * 2 + 1, size1 << factor);
 	}
 }
 
-/*
- * There currently are 3 types type of MC devices for AMD Athlon/Opterons
- * (as per PCI DEVICE_IDs):
- *
- * Family K8: That is the Athlon64 and Opteron CPUs. They all have the same PCI
- * DEVICE ID, even though there is differences between the different Revisions
- * (CG,D,E,F).
- *
- * Family F10h and F11h.
- *
- */
 static struct amd64_family_type amd64_family_types[] = {
 	[K8_CPUS] = {
-		.ctl_name = "RevF",
-		.addr_f1_ctl = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
-		.misc_f3_ctl = PCI_DEVICE_ID_AMD_K8_NB_MISC,
+		.ctl_name = "K8",
+		.f1_id = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
+		.f3_id = PCI_DEVICE_ID_AMD_K8_NB_MISC,
 		.ops = {
 			.early_channel_count	= k8_early_channel_count,
 			.get_error_address	= k8_get_error_address,
@@ -1769,22 +1683,9 @@ static struct amd64_family_type amd64_family_types[] = {
 		}
 	},
 	[F10_CPUS] = {
-		.ctl_name = "Family 10h",
-		.addr_f1_ctl = PCI_DEVICE_ID_AMD_10H_NB_MAP,
-		.misc_f3_ctl = PCI_DEVICE_ID_AMD_10H_NB_MISC,
-		.ops = {
-			.early_channel_count	= f10_early_channel_count,
-			.get_error_address	= f10_get_error_address,
-			.read_dram_base_limit	= f10_read_dram_base_limit,
-			.read_dram_ctl_register	= f10_read_dram_ctl_register,
-			.map_sysaddr_to_csrow	= f10_map_sysaddr_to_csrow,
-			.dbam_to_cs		= f10_dbam_to_chip_select,
-		}
-	},
-	[F11_CPUS] = {
-		.ctl_name = "Family 11h",
-		.addr_f1_ctl = PCI_DEVICE_ID_AMD_11H_NB_MAP,
-		.misc_f3_ctl = PCI_DEVICE_ID_AMD_11H_NB_MISC,
+		.ctl_name = "F10h",
+		.f1_id = PCI_DEVICE_ID_AMD_10H_NB_MAP,
+		.f3_id = PCI_DEVICE_ID_AMD_10H_NB_MISC,
 		.ops = {
 			.early_channel_count	= f10_early_channel_count,
 			.get_error_address	= f10_get_error_address,
@@ -1970,8 +1871,7 @@ static int get_channel_from_ecc_syndrome(struct mem_ctl_info *mci, u16 syndrome)
 					  ARRAY_SIZE(x4_vectors),
 					  pvt->syn_type);
 	else {
-		amd64_printk(KERN_WARNING, "%s: Illegal syndrome type: %u\n",
-					   __func__, pvt->syn_type);
+		amd64_warn("Illegal syndrome type: %u\n", pvt->syn_type);
 		return err_sym;
 	}
 
@@ -1989,17 +1889,15 @@ static void amd64_handle_ce(struct mem_ctl_info *mci,
 	u64 sys_addr;
 
 	/* Ensure that the Error Address is VALID */
-	if ((info->nbsh & K8_NBSH_VALID_ERROR_ADDR) == 0) {
-		amd64_mc_printk(mci, KERN_ERR,
-			"HW has no ERROR_ADDRESS available\n");
+	if (!(info->nbsh & K8_NBSH_VALID_ERROR_ADDR)) {
+		amd64_mc_err(mci, "HW has no ERROR_ADDRESS available\n");
 		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
 		return;
 	}
 
 	sys_addr = pvt->ops->get_error_address(mci, info);
 
-	amd64_mc_printk(mci, KERN_ERR,
-		"CE ERROR_ADDRESS= 0x%llx\n", sys_addr);
+	amd64_mc_err(mci, "CE ERROR_ADDRESS= 0x%llx\n", sys_addr);
 
 	pvt->ops->map_sysaddr_to_csrow(mci, info, sys_addr);
 }
@@ -2016,9 +1914,8 @@ static void amd64_handle_ue(struct mem_ctl_info *mci,
 
 	log_mci = mci;
 
-	if ((info->nbsh & K8_NBSH_VALID_ERROR_ADDR) == 0) {
-		amd64_mc_printk(mci, KERN_CRIT,
-			"HW has no ERROR_ADDRESS available\n");
+	if (!(info->nbsh & K8_NBSH_VALID_ERROR_ADDR)) {
+		amd64_mc_err(mci, "HW has no ERROR_ADDRESS available\n");
 		edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR);
 		return;
 	}
@@ -2031,9 +1928,8 @@ static void amd64_handle_ue(struct mem_ctl_info *mci,
 	 */
 	src_mci = find_mc_by_sys_addr(mci, sys_addr);
 	if (!src_mci) {
-		amd64_mc_printk(mci, KERN_CRIT,
-			"ERROR ADDRESS (0x%lx) value NOT mapped to a MC\n",
-			(unsigned long)sys_addr);
+		amd64_mc_err(mci, "ERROR ADDRESS (0x%lx) NOT mapped to a MC\n",
+				  (unsigned long)sys_addr);
 		edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR);
 		return;
 	}
@@ -2042,9 +1938,8 @@ static void amd64_handle_ue(struct mem_ctl_info *mci,
 
 	csrow = sys_addr_to_csrow(log_mci, sys_addr);
 	if (csrow < 0) {
-		amd64_mc_printk(mci, KERN_CRIT,
-			"ERROR_ADDRESS (0x%lx) value NOT mapped to 'csrow'\n",
-			(unsigned long)sys_addr);
+		amd64_mc_err(mci, "ERROR_ADDRESS (0x%lx) NOT mapped to CS\n",
+				  (unsigned long)sys_addr);
 		edac_mc_handle_ue_no_info(log_mci, EDAC_MOD_STR);
 	} else {
 		error_address_to_page_and_offset(sys_addr, &page, &offset);
@@ -2055,8 +1950,8 @@ static void amd64_handle_ue(struct mem_ctl_info *mci,
 static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci,
 					    struct err_regs *info)
 {
-	u32 ec  = ERROR_CODE(info->nbsl);
-	u32 xec = EXT_ERROR_CODE(info->nbsl);
+	u16 ec = EC(info->nbsl);
+	u8 xec = XEC(info->nbsl, 0x1f);
 	int ecc_type = (info->nbsh >> 13) & 0x3;
 
 	/* Bail early out if this was an 'observed' error */
@@ -2075,7 +1970,7 @@ static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci,
 
 void amd64_decode_bus_error(int node_id, struct mce *m, u32 nbcfg)
 {
-	struct mem_ctl_info *mci = mci_lookup[node_id];
+	struct mem_ctl_info *mci = mcis[node_id];
 	struct err_regs regs;
 
 	regs.nbsl  = (u32) m->status;
@@ -2099,75 +1994,50 @@ void amd64_decode_bus_error(int node_id, struct mce *m, u32 nbcfg)
 }
 
 /*
- * Input:
- *	1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer
- *	2) AMD Family index value
- *
- * Ouput:
- *	Upon return of 0, the following filled in:
- *
- *		struct pvt->addr_f1_ctl
- *		struct pvt->misc_f3_ctl
- *
- *	Filled in with related device funcitions of 'dram_f2_ctl'
- *	These devices are "reserved" via the pci_get_device()
- *
- *	Upon return of 1 (error status):
- *
- *		Nothing reserved
+ * Use pvt->F2 which contains the F2 CPU PCI device to get the related
+ * F1 (AddrMap) and F3 (Misc) devices. Return negative value on error.
  */
-static int amd64_reserve_mc_sibling_devices(struct amd64_pvt *pvt, int mc_idx)
+static int reserve_mc_sibling_devs(struct amd64_pvt *pvt, u16 f1_id, u16 f3_id)
 {
-	const struct amd64_family_type *amd64_dev = &amd64_family_types[mc_idx];
-
 	/* Reserve the ADDRESS MAP Device */
-	pvt->addr_f1_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor,
-						    amd64_dev->addr_f1_ctl,
-						    pvt->dram_f2_ctl);
-
-	if (!pvt->addr_f1_ctl) {
-		amd64_printk(KERN_ERR, "error address map device not found: "
-			     "vendor %x device 0x%x (broken BIOS?)\n",
-			     PCI_VENDOR_ID_AMD, amd64_dev->addr_f1_ctl);
-		return 1;
+	pvt->F1 = pci_get_related_function(pvt->F2->vendor, f1_id, pvt->F2);
+	if (!pvt->F1) {
+		amd64_err("error address map device not found: "
+			  "vendor %x device 0x%x (broken BIOS?)\n",
+			  PCI_VENDOR_ID_AMD, f1_id);
+		return -ENODEV;
 	}
 
 	/* Reserve the MISC Device */
-	pvt->misc_f3_ctl = pci_get_related_function(pvt->dram_f2_ctl->vendor,
-						    amd64_dev->misc_f3_ctl,
-						    pvt->dram_f2_ctl);
+	pvt->F3 = pci_get_related_function(pvt->F2->vendor, f3_id, pvt->F2);
+	if (!pvt->F3) {
+		pci_dev_put(pvt->F1);
+		pvt->F1 = NULL;
 
-	if (!pvt->misc_f3_ctl) {
-		pci_dev_put(pvt->addr_f1_ctl);
-		pvt->addr_f1_ctl = NULL;
+		amd64_err("error F3 device not found: "
+			  "vendor %x device 0x%x (broken BIOS?)\n",
+			  PCI_VENDOR_ID_AMD, f3_id);
 
-		amd64_printk(KERN_ERR, "error miscellaneous device not found: "
-			     "vendor %x device 0x%x (broken BIOS?)\n",
-			     PCI_VENDOR_ID_AMD, amd64_dev->misc_f3_ctl);
-		return 1;
+		return -ENODEV;
 	}
-
-	debugf1("    Addr Map device PCI Bus ID:\t%s\n",
-		pci_name(pvt->addr_f1_ctl));
-	debugf1("    DRAM MEM-CTL PCI Bus ID:\t%s\n",
-		pci_name(pvt->dram_f2_ctl));
-	debugf1("    Misc device PCI Bus ID:\t%s\n",
-		pci_name(pvt->misc_f3_ctl));
+	debugf1("F1: %s\n", pci_name(pvt->F1));
+	debugf1("F2: %s\n", pci_name(pvt->F2));
+	debugf1("F3: %s\n", pci_name(pvt->F3));
 
 	return 0;
 }
 
-static void amd64_free_mc_sibling_devices(struct amd64_pvt *pvt)
+static void free_mc_sibling_devs(struct amd64_pvt *pvt)
 {
-	pci_dev_put(pvt->addr_f1_ctl);
-	pci_dev_put(pvt->misc_f3_ctl);
+	pci_dev_put(pvt->F1);
+	pci_dev_put(pvt->F3);
 }
 
 /*
  * Retrieve the hardware registers of the memory controller (this includes the
  * 'Address Map' and 'Misc' device regs)
  */
-static void amd64_read_mc_registers(struct amd64_pvt *pvt)
+static void read_mc_regs(struct amd64_pvt *pvt)
 {
 	u64 msr_val;
 	u32 tmp;
@@ -2188,9 +2058,7 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt)
 	} else
 		debugf0("  TOP_MEM2 disabled.\n");
 
-	amd64_cpu_display_info(pvt);
-
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCAP, &pvt->nbcap);
+	amd64_read_pci_cfg(pvt->F3, K8_NBCAP, &pvt->nbcap);
 
 	if (pvt->ops->read_dram_ctl_register)
 		pvt->ops->read_dram_ctl_register(pvt);
@@ -2227,21 +2095,20 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt)
 
 	amd64_read_dct_base_mask(pvt);
 
-	amd64_read_pci_cfg(pvt->addr_f1_ctl, K8_DHAR, &pvt->dhar);
+	amd64_read_pci_cfg(pvt->F1, K8_DHAR, &pvt->dhar);
 	amd64_read_dbam_reg(pvt);
 
-	amd64_read_pci_cfg(pvt->misc_f3_ctl,
-			   F10_ONLINE_SPARE, &pvt->online_spare);
+	amd64_read_pci_cfg(pvt->F3, F10_ONLINE_SPARE, &pvt->online_spare);
 
-	amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
-	amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0);
+	amd64_read_pci_cfg(pvt->F2, F10_DCLR_0, &pvt->dclr0);
+	amd64_read_pci_cfg(pvt->F2, F10_DCHR_0, &pvt->dchr0);
 
 	if (boot_cpu_data.x86 >= 0x10) {
 		if (!dct_ganging_enabled(pvt)) {
-			amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1);
-			amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_1, &pvt->dchr1);
+			amd64_read_pci_cfg(pvt->F2, F10_DCLR_1, &pvt->dclr1);
+			amd64_read_pci_cfg(pvt->F2, F10_DCHR_1, &pvt->dchr1);
 		}
-		amd64_read_pci_cfg(pvt->misc_f3_ctl, EXT_NB_MCA_CFG, &tmp);
+		amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp);
 	}
 
 	if (boot_cpu_data.x86 == 0x10 &&
@@ -2321,21 +2188,22 @@ static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt)
  * Initialize the array of csrow attribute instances, based on the values
  * from pci config hardware registers.
  */
-static int amd64_init_csrows(struct mem_ctl_info *mci)
+static int init_csrows(struct mem_ctl_info *mci)
 {
 	struct csrow_info *csrow;
-	struct amd64_pvt *pvt;
+	struct amd64_pvt *pvt = mci->pvt_info;
 	u64 input_addr_min, input_addr_max, sys_addr;
+	u32 val;
 	int i, empty = 1;
 
-	pvt = mci->pvt_info;
+	amd64_read_pci_cfg(pvt->F3, K8_NBCFG, &val);
 
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCFG, &pvt->nbcfg);
+	pvt->nbcfg = val;
+	pvt->ctl_error_info.nbcfg = val;
 
-	debugf0("NBCFG= 0x%x  CHIPKILL= %s DRAM ECC= %s\n", pvt->nbcfg,
-		(pvt->nbcfg & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled",
-		(pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"
-		);
+	debugf0("node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
+		pvt->mc_node_id, val,
+		!!(val & K8_NBCFG_CHIPKILL), !!(val & K8_NBCFG_ECC_ENABLE));
 
 	for (i = 0; i < pvt->cs_count; i++) {
 		csrow = &mci->csrows[i];
@@ -2359,7 +2227,7 @@ static int amd64_init_csrows(struct mem_ctl_info *mci)
 		csrow->page_mask = ~mask_from_dct_mask(pvt, i);
 		/* 8 bytes of resolution */
 
-		csrow->mtype = amd64_determine_memory_type(pvt);
+		csrow->mtype = amd64_determine_memory_type(pvt, i);
 
 		debugf1("  for MC node %d csrow %d:\n", pvt->mc_node_id, i);
 		debugf1("    input_addr_min: 0x%lx input_addr_max: 0x%lx\n",
@@ -2404,8 +2272,7 @@ static bool amd64_nb_mce_bank_enabled_on_node(int nid)
 	bool ret = false;
 
 	if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) {
-		amd64_printk(KERN_WARNING, "%s: error allocating mask\n",
-			     __func__);
+		amd64_warn("%s: Error allocating mask\n", __func__);
 		return false;
 	}
 
@@ -2431,18 +2298,17 @@ out:
 	return ret;
 }
 
-static int amd64_toggle_ecc_err_reporting(struct amd64_pvt *pvt, bool on)
+static int toggle_ecc_err_reporting(struct ecc_settings *s, u8 nid, bool on)
 {
 	cpumask_var_t cmask;
 	int cpu;
 
 	if (!zalloc_cpumask_var(&cmask, GFP_KERNEL)) {
-		amd64_printk(KERN_WARNING, "%s: error allocating mask\n",
-			     __func__);
+		amd64_warn("%s: error allocating mask\n", __func__);
 		return false;
 	}
 
-	get_cpus_on_this_dct_cpumask(cmask, pvt->mc_node_id);
+	get_cpus_on_this_dct_cpumask(cmask, nid);
 
 	rdmsr_on_cpus(cmask, MSR_IA32_MCG_CTL, msrs);
 
@@ -2452,14 +2318,14 @@ static int amd64_toggle_ecc_err_reporting(struct amd64_pvt *pvt, bool on)
 
 		if (on) {
 			if (reg->l & K8_MSR_MCGCTL_NBE)
-				pvt->flags.nb_mce_enable = 1;
+				s->flags.nb_mce_enable = 1;
 
 			reg->l |= K8_MSR_MCGCTL_NBE;
 		} else {
 			/*
 			 * Turn off NB MCE reporting only when it was off before
 			 */
-			if (!pvt->flags.nb_mce_enable)
+			if (!s->flags.nb_mce_enable)
 				reg->l &= ~K8_MSR_MCGCTL_NBE;
 		}
 	}
@@ -2470,92 +2336,92 @@ static int amd64_toggle_ecc_err_reporting(struct amd64_pvt *pvt, bool on)
 	return 0;
 }
 
-static void amd64_enable_ecc_error_reporting(struct mem_ctl_info *mci)
+static bool enable_ecc_error_reporting(struct ecc_settings *s, u8 nid,
+				       struct pci_dev *F3)
 {
-	struct amd64_pvt *pvt = mci->pvt_info;
+	bool ret = true;
 	u32 value, mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn;
 
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCTL, &value);
+	if (toggle_ecc_err_reporting(s, nid, ON)) {
+		amd64_warn("Error enabling ECC reporting over MCGCTL!\n");
+		return false;
+	}
+
+	amd64_read_pci_cfg(F3, K8_NBCTL, &value);
 
-	/* turn on UECCn and CECCEn bits */
-	pvt->old_nbctl = value & mask;
-	pvt->nbctl_mcgctl_saved = 1;
+	/* turn on UECCEn and CECCEn bits */
+	s->old_nbctl   = value & mask;
+	s->nbctl_valid = true;
 
 	value |= mask;
-	pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCTL, value);
-
-	if (amd64_toggle_ecc_err_reporting(pvt, ON))
-		amd64_printk(KERN_WARNING, "Error enabling ECC reporting over "
-					   "MCGCTL!\n");
+	pci_write_config_dword(F3, K8_NBCTL, value);
 
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCFG, &value);
+	amd64_read_pci_cfg(F3, K8_NBCFG, &value);
 
-	debugf0("NBCFG(1)= 0x%x  CHIPKILL= %s ECC_ENABLE= %s\n", value,
-		(value & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled",
-		(value & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled");
+	debugf0("1: node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
+		nid, value,
+		!!(value & K8_NBCFG_CHIPKILL), !!(value & K8_NBCFG_ECC_ENABLE));
 
 	if (!(value & K8_NBCFG_ECC_ENABLE)) {
-		amd64_printk(KERN_WARNING,
-			"This node reports that DRAM ECC is "
-			"currently Disabled; ENABLING now\n");
+		amd64_warn("DRAM ECC disabled on this node, enabling...\n");
 
-		pvt->flags.nb_ecc_prev = 0;
+		s->flags.nb_ecc_prev = 0;
 
 		/* Attempt to turn on DRAM ECC Enable */
 		value |= K8_NBCFG_ECC_ENABLE;
-		pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCFG, value);
+		pci_write_config_dword(F3, K8_NBCFG, value);
 
-		amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCFG, &value);
+		amd64_read_pci_cfg(F3, K8_NBCFG, &value);
 
 		if (!(value & K8_NBCFG_ECC_ENABLE)) {
-			amd64_printk(KERN_WARNING,
-				"Hardware rejects Enabling DRAM ECC checking\n"
-				"Check memory DIMM configuration\n");
+			amd64_warn("Hardware rejected DRAM ECC enable,"
+				   "check memory DIMM configuration.\n");
+			ret = false;
 		} else {
-			amd64_printk(KERN_DEBUG,
-				"Hardware accepted DRAM ECC Enable\n");
+			amd64_info("Hardware accepted DRAM ECC Enable\n");
 		}
 	} else {
-		pvt->flags.nb_ecc_prev = 1;
+		s->flags.nb_ecc_prev = 1;
 	}
 
-	debugf0("NBCFG(2)= 0x%x  CHIPKILL= %s ECC_ENABLE= %s\n", value,
-		(value & K8_NBCFG_CHIPKILL) ? "Enabled" : "Disabled",
-		(value & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled");
+	debugf0("2: node %d, NBCFG=0x%08x[ChipKillEccCap: %d|DramEccEn: %d]\n",
+		nid, value,
+		!!(value & K8_NBCFG_CHIPKILL), !!(value & K8_NBCFG_ECC_ENABLE));
 
-	pvt->ctl_error_info.nbcfg = value;
+	return ret;
 }
 
-static void amd64_restore_ecc_error_reporting(struct amd64_pvt *pvt)
+static void restore_ecc_error_reporting(struct ecc_settings *s, u8 nid,
+					struct pci_dev *F3)
 {
 	u32 value, mask = K8_NBCTL_CECCEn | K8_NBCTL_UECCEn;
 
-	if (!pvt->nbctl_mcgctl_saved)
+	if (!s->nbctl_valid)
 		return;
 
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCTL, &value);
+	amd64_read_pci_cfg(F3, K8_NBCTL, &value);
 	value &= ~mask;
-	value |= pvt->old_nbctl;
+	value |= s->old_nbctl;
 
-	pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCTL, value);
+	pci_write_config_dword(F3, K8_NBCTL, value);
 
-	/* restore previous BIOS DRAM ECC "off" setting which we force-enabled */
-	if (!pvt->flags.nb_ecc_prev) {
-		amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCFG, &value);
+	/* restore previous BIOS DRAM ECC "off" setting we force-enabled */
+	if (!s->flags.nb_ecc_prev) {
+		amd64_read_pci_cfg(F3, K8_NBCFG, &value);
 		value &= ~K8_NBCFG_ECC_ENABLE;
-		pci_write_config_dword(pvt->misc_f3_ctl, K8_NBCFG, value);
+		pci_write_config_dword(F3, K8_NBCFG, value);
 	}
 
 	/* restore the NB Enable MCGCTL bit */
-	if (amd64_toggle_ecc_err_reporting(pvt, OFF))
-		amd64_printk(KERN_WARNING, "Error restoring NB MCGCTL settings!\n");
+	if (toggle_ecc_err_reporting(s, nid, OFF))
+		amd64_warn("Error restoring NB MCGCTL settings!\n");
 }
 
 /*
- * EDAC requires that the BIOS have ECC enabled before taking over the
- * processing of ECC errors. This is because the BIOS can properly initialize
- * the memory system completely. A command line option allows to force-enable
- * hardware ECC later in amd64_enable_ecc_error_reporting().
+ * EDAC requires that the BIOS have ECC enabled before
+ * taking over the processing of ECC errors. A command line
+ * option allows to force-enable hardware ECC later in
+ * enable_ecc_error_reporting().
  */
 static const char *ecc_msg =
 	"ECC disabled in the BIOS or no ECC capability, module will not load.\n"
@@ -2563,38 +2429,28 @@ static const char *ecc_msg =
 	"'ecc_enable_override'.\n"
 	" (Note that use of the override may cause unknown side effects.)\n";
 
-static int amd64_check_ecc_enabled(struct amd64_pvt *pvt)
+static bool ecc_enabled(struct pci_dev *F3, u8 nid)
 {
 	u32 value;
-	u8 ecc_enabled = 0;
+	u8 ecc_en = 0;
 	bool nb_mce_en = false;
 
-	amd64_read_pci_cfg(pvt->misc_f3_ctl, K8_NBCFG, &value);
+	amd64_read_pci_cfg(F3, K8_NBCFG, &value);
 
-	ecc_enabled = !!(value & K8_NBCFG_ECC_ENABLE);
-	if (!ecc_enabled)
-		amd64_printk(KERN_NOTICE, "This node reports that Memory ECC "
-			     "is currently disabled, set F3x%x[22] (%s).\n",
-			     K8_NBCFG, pci_name(pvt->misc_f3_ctl));
-	else
-		amd64_printk(KERN_INFO, "ECC is enabled by BIOS.\n");
+	ecc_en = !!(value & K8_NBCFG_ECC_ENABLE);
+	amd64_info("DRAM ECC %s.\n", (ecc_en ? "enabled" : "disabled"));
 
-	nb_mce_en = amd64_nb_mce_bank_enabled_on_node(pvt->mc_node_id);
+	nb_mce_en = amd64_nb_mce_bank_enabled_on_node(nid);
 	if (!nb_mce_en)
-		amd64_printk(KERN_NOTICE, "NB MCE bank disabled, set MSR "
+		amd64_notice("NB MCE bank disabled, set MSR "
 			     "0x%08x[4] on node %d to enable.\n",
-			     MSR_IA32_MCG_CTL, pvt->mc_node_id);
+			     MSR_IA32_MCG_CTL, nid);
 
-	if (!ecc_enabled || !nb_mce_en) {
-		if (!ecc_enable_override) {
-			amd64_printk(KERN_NOTICE, "%s", ecc_msg);
-			return -ENODEV;
-		} else {
-			amd64_printk(KERN_WARNING, "Forcing ECC checking on!\n");
-		}
+	if (!ecc_en || !nb_mce_en) {
+		amd64_notice("%s", ecc_msg);
+		return false;
 	}
-
-	return 0;
+	return true;
 }
 
 struct mcidev_sysfs_attribute sysfs_attrs[ARRAY_SIZE(amd64_dbg_attrs) +
@@ -2603,22 +2459,23 @@ struct mcidev_sysfs_attribute sysfs_attrs[ARRAY_SIZE(amd64_dbg_attrs) +
 
 struct mcidev_sysfs_attribute terminator = { .attr = { .name = NULL } };
 
-static void amd64_set_mc_sysfs_attributes(struct mem_ctl_info *mci)
+static void set_mc_sysfs_attrs(struct mem_ctl_info *mci)
 {
 	unsigned int i = 0, j = 0;
 
 	for (; i < ARRAY_SIZE(amd64_dbg_attrs); i++)
 		sysfs_attrs[i] = amd64_dbg_attrs[i];
 
-	for (j = 0; j < ARRAY_SIZE(amd64_inj_attrs); j++, i++)
-		sysfs_attrs[i] = amd64_inj_attrs[j];
+	if (boot_cpu_data.x86 >= 0x10)
+		for (j = 0; j < ARRAY_SIZE(amd64_inj_attrs); j++, i++)
+			sysfs_attrs[i] = amd64_inj_attrs[j];
 
 	sysfs_attrs[i] = terminator;
 
 	mci->mc_driver_sysfs_attributes = sysfs_attrs;
 }
 
-static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
+static void setup_mci_misc_attrs(struct mem_ctl_info *mci)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
 
@@ -2634,8 +2491,8 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
 	mci->edac_cap		= amd64_determine_edac_cap(pvt);
 	mci->mod_name		= EDAC_MOD_STR;
 	mci->mod_ver		= EDAC_AMD64_VERSION;
-	mci->ctl_name		= get_amd_family_name(pvt->mc_type_index);
-	mci->dev_name		= pci_name(pvt->dram_f2_ctl);
+	mci->ctl_name		= pvt->ctl_name;
+	mci->dev_name		= pci_name(pvt->F2);
 	mci->ctl_page_to_phys	= NULL;
 
 	/* memory scrubber interface */
@@ -2644,111 +2501,94 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
 }
 
 /*
- * Init stuff for this DRAM Controller device.
- *
- * Due to a hardware feature on Fam10h CPUs, the Enable Extended Configuration
- * Space feature MUST be enabled on ALL Processors prior to actually reading
- * from the ECS registers. Since the loading of the module can occur on any
- * 'core', and cores don't 'see' all the other processors ECS data when the
- * others are NOT enabled. Our solution is to first enable ECS access in this
- * routine on all processors, gather some data in a amd64_pvt structure and
- * later come back in a finish-setup function to perform that final
- * initialization. See also amd64_init_2nd_stage() for that.
+ * returns a pointer to the family descriptor on success, NULL otherwise.
  */
-static int amd64_probe_one_instance(struct pci_dev *dram_f2_ctl,
-				    int mc_type_index)
+static struct amd64_family_type *amd64_per_family_init(struct amd64_pvt *pvt)
+{
+	u8 fam = boot_cpu_data.x86;
+	struct amd64_family_type *fam_type = NULL;
+
+	switch (fam) {
+	case 0xf:
+		fam_type		= &amd64_family_types[K8_CPUS];
+		pvt->ops		= &amd64_family_types[K8_CPUS].ops;
+		pvt->ctl_name		= fam_type->ctl_name;
+		pvt->min_scrubrate	= K8_MIN_SCRUB_RATE_BITS;
+		break;
+	case 0x10:
+		fam_type		= &amd64_family_types[F10_CPUS];
+		pvt->ops		= &amd64_family_types[F10_CPUS].ops;
+		pvt->ctl_name		= fam_type->ctl_name;
+		pvt->min_scrubrate	= F10_MIN_SCRUB_RATE_BITS;
+		break;
+
+	default:
+		amd64_err("Unsupported family!\n");
+		return NULL;
+	}
+
+	pvt->ext_model = boot_cpu_data.x86_model >> 4;
+
+	amd64_info("%s %sdetected (node %d).\n", pvt->ctl_name,
+		     (fam == 0xf ?
+				(pvt->ext_model >= K8_REV_F  ? "revF or later "
+							     : "revE or earlier ")
+				 : ""), pvt->mc_node_id);
+	return fam_type;
+}
+
+static int amd64_init_one_instance(struct pci_dev *F2)
 {
 	struct amd64_pvt *pvt = NULL;
+	struct amd64_family_type *fam_type = NULL;
+	struct mem_ctl_info *mci = NULL;
 	int err = 0, ret;
+	u8 nid = get_node_id(F2);
 
 	ret = -ENOMEM;
 	pvt = kzalloc(sizeof(struct amd64_pvt), GFP_KERNEL);
 	if (!pvt)
-		goto err_exit;
+		goto err_ret;
 
-	pvt->mc_node_id = get_node_id(dram_f2_ctl);
+	pvt->mc_node_id	= nid;
+	pvt->F2 = F2;
 
-	pvt->dram_f2_ctl	= dram_f2_ctl;
-	pvt->ext_model		= boot_cpu_data.x86_model >> 4;
-	pvt->mc_type_index	= mc_type_index;
-	pvt->ops		= family_ops(mc_type_index);
+	ret = -EINVAL;
+	fam_type = amd64_per_family_init(pvt);
+	if (!fam_type)
+		goto err_free;
 
-	/*
-	 * We have the dram_f2_ctl device as an argument, now go reserve its
-	 * sibling devices from the PCI system.
-	 */
 	ret = -ENODEV;
-	err = amd64_reserve_mc_sibling_devices(pvt, mc_type_index);
+	err = reserve_mc_sibling_devs(pvt, fam_type->f1_id, fam_type->f3_id);
 	if (err)
 		goto err_free;
 
-	ret = -EINVAL;
-	err = amd64_check_ecc_enabled(pvt);
-	if (err)
-		goto err_put;
-
-	/*
-	 * Key operation here: setup of HW prior to performing ops on it. Some
-	 * setup is required to access ECS data. After this is performed, the
-	 * 'teardown' function must be called upon error and normal exit paths.
-	 */
-	if (boot_cpu_data.x86 >= 0x10)
-		amd64_setup(pvt);
-
-	/*
-	 * Save the pointer to the private data for use in 2nd initialization
-	 * stage
-	 */
-	pvt_lookup[pvt->mc_node_id] = pvt;
-
-	return 0;
-
-err_put:
-	amd64_free_mc_sibling_devices(pvt);
-
-err_free:
-	kfree(pvt);
-
-err_exit:
-	return ret;
-}
-
-/*
- * This is the finishing stage of the init code. Needs to be performed after all
- * MCs' hardware have been prepped for accessing extended config space.
- */
-static int amd64_init_2nd_stage(struct amd64_pvt *pvt)
-{
-	int node_id = pvt->mc_node_id;
-	struct mem_ctl_info *mci;
-	int ret = -ENODEV;
-
-	amd64_read_mc_registers(pvt);
+	read_mc_regs(pvt);
 
 	/*
 	 * We need to determine how many memory channels there are. Then use
 	 * that information for calculating the size of the dynamic instance
-	 * tables in the 'mci' structure
+	 * tables in the 'mci' structure.
 	 */
+	ret = -EINVAL;
 	pvt->channel_count = pvt->ops->early_channel_count(pvt);
 	if (pvt->channel_count < 0)
-		goto err_exit;
+		goto err_siblings;
 
 	ret = -ENOMEM;
-	mci = edac_mc_alloc(0, pvt->cs_count, pvt->channel_count, node_id);
+	mci = edac_mc_alloc(0, pvt->cs_count, pvt->channel_count, nid);
 	if (!mci)
-		goto err_exit;
+		goto err_siblings;
 
 	mci->pvt_info = pvt;
+	mci->dev = &pvt->F2->dev;
 
-	mci->dev = &pvt->dram_f2_ctl->dev;
-	amd64_setup_mci_misc_attributes(mci);
+	setup_mci_misc_attrs(mci);
 
-	if (amd64_init_csrows(mci))
+	if (init_csrows(mci))
 		mci->edac_cap = EDAC_FLAG_NONE;
 
-	amd64_enable_ecc_error_reporting(mci);
-	amd64_set_mc_sysfs_attributes(mci);
+	set_mc_sysfs_attrs(mci);
 
 	ret = -ENODEV;
 	if (edac_mc_add_mc(mci)) {
@@ -2756,54 +2596,77 @@ static int amd64_init_2nd_stage(struct amd64_pvt *pvt)
 		goto err_add_mc;
 	}
 
-	mci_lookup[node_id] = mci;
-	pvt_lookup[node_id] = NULL;
-
 	/* register stuff with EDAC MCE */
 	if (report_gart_errors)
 		amd_report_gart_errors(true);
 
 	amd_register_ecc_decoder(amd64_decode_bus_error);
 
+	mcis[nid] = mci;
+
+	atomic_inc(&drv_instances);
+
 	return 0;
 
 err_add_mc:
 	edac_mc_free(mci);
 
-err_exit:
-	debugf0("failure to init 2nd stage: ret=%d\n", ret);
-
-	amd64_restore_ecc_error_reporting(pvt);
-
-	if (boot_cpu_data.x86 > 0xf)
-		amd64_teardown(pvt);
+err_siblings:
+	free_mc_sibling_devs(pvt);
 
-	amd64_free_mc_sibling_devices(pvt);
-
-	kfree(pvt_lookup[pvt->mc_node_id]);
-	pvt_lookup[node_id] = NULL;
+err_free:
+	kfree(pvt);
 
+err_ret:
 	return ret;
 }
 
-
-static int __devinit amd64_init_one_instance(struct pci_dev *pdev,
-				 const struct pci_device_id *mc_type)
+static int __devinit amd64_probe_one_instance(struct pci_dev *pdev,
+					     const struct pci_device_id *mc_type)
 {
+	u8 nid = get_node_id(pdev);
+	struct pci_dev *F3 = node_to_amd_nb(nid)->misc;
+	struct ecc_settings *s;
 	int ret = 0;
 
-	debugf0("(MC node=%d,mc_type='%s')\n", get_node_id(pdev),
-		get_amd_family_name(mc_type->driver_data));
-
 	ret = pci_enable_device(pdev);
-	if (ret < 0)
-		ret = -EIO;
-	else
-		ret = amd64_probe_one_instance(pdev, mc_type->driver_data);
-
-	if (ret < 0)
+	if (ret < 0) {
 		debugf0("ret=%d\n", ret);
+		return -EIO;
+	}
+
+	ret = -ENOMEM;
+	s = kzalloc(sizeof(struct ecc_settings), GFP_KERNEL);
+	if (!s)
+		goto err_out;
+
+	ecc_stngs[nid] = s;
+
+	if (!ecc_enabled(F3, nid)) {
+		ret = -ENODEV;
+
+		if (!ecc_enable_override)
+			goto err_enable;
+
+		amd64_warn("Forcing ECC on!\n");
+
+		if (!enable_ecc_error_reporting(s, nid, F3))
+			goto err_enable;
+	}
 
+	ret = amd64_init_one_instance(pdev);
+	if (ret < 0) {
+		amd64_err("Error probing instance: %d\n", nid);
+		restore_ecc_error_reporting(s, nid, F3);
+	}
+
+	return ret;
+
+err_enable:
+	kfree(s);
+	ecc_stngs[nid] = NULL;
+
+err_out:
 	return ret;
 }
 
@@ -2811,6 +2674,9 @@ static void __devexit amd64_remove_one_instance(struct pci_dev *pdev)
 {
 	struct mem_ctl_info *mci;
 	struct amd64_pvt *pvt;
+	u8 nid = get_node_id(pdev);
+	struct pci_dev *F3 = node_to_amd_nb(nid)->misc;
+	struct ecc_settings *s = ecc_stngs[nid];
 
 	/* Remove from EDAC CORE tracking list */
 	mci = edac_mc_del_mc(&pdev->dev);
@@ -2819,20 +2685,20 @@ static void __devexit amd64_remove_one_instance(struct pci_dev *pdev)
 
 	pvt = mci->pvt_info;
 
-	amd64_restore_ecc_error_reporting(pvt);
+	restore_ecc_error_reporting(s, nid, F3);
 
-	if (boot_cpu_data.x86 > 0xf)
-		amd64_teardown(pvt);
-
-	amd64_free_mc_sibling_devices(pvt);
+	free_mc_sibling_devs(pvt);
 
 	/* unregister from EDAC MCE */
 	amd_report_gart_errors(false);
 	amd_unregister_ecc_decoder(amd64_decode_bus_error);
 
+	kfree(ecc_stngs[nid]);
+	ecc_stngs[nid] = NULL;
+
 	/* Free the EDAC CORE resources */
 	mci->pvt_info = NULL;
-	mci_lookup[pvt->mc_node_id] = NULL;
+	mcis[nid] = NULL;
 
 	kfree(pvt);
 	edac_mc_free(mci);
@@ -2851,7 +2717,6 @@ static const struct pci_device_id amd64_pci_table[] __devinitdata = {
 		.subdevice	= PCI_ANY_ID,
 		.class		= 0,
 		.class_mask	= 0,
-		.driver_data	= K8_CPUS
 	},
 	{
 		.vendor		= PCI_VENDOR_ID_AMD,
@@ -2860,16 +2725,6 @@ static const struct pci_device_id amd64_pci_table[] __devinitdata = {
 		.subdevice	= PCI_ANY_ID,
 		.class		= 0,
 		.class_mask	= 0,
-		.driver_data	= F10_CPUS
-	},
-	{
-		.vendor		= PCI_VENDOR_ID_AMD,
-		.device		= PCI_DEVICE_ID_AMD_11H_NB_DRAM,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.class		= 0,
-		.class_mask	= 0,
-		.driver_data	= F11_CPUS
 	},
 	{0, }
 };
@@ -2877,12 +2732,12 @@ MODULE_DEVICE_TABLE(pci, amd64_pci_table);
 
 static struct pci_driver amd64_pci_driver = {
 	.name		= EDAC_MOD_STR,
-	.probe		= amd64_init_one_instance,
+	.probe		= amd64_probe_one_instance,
 	.remove		= __devexit_p(amd64_remove_one_instance),
 	.id_table	= amd64_pci_table,
 };
 
-static void amd64_setup_pci_device(void)
+static void setup_pci_device(void)
 {
 	struct mem_ctl_info *mci;
 	struct amd64_pvt *pvt;
@@ -2890,13 +2745,12 @@ static void amd64_setup_pci_device(void)
 	if (amd64_ctl_pci)
 		return;
 
-	mci = mci_lookup[0];
+	mci = mcis[0];
 	if (mci) {
 
 		pvt = mci->pvt_info;
 		amd64_ctl_pci =
-			edac_pci_create_generic_ctl(&pvt->dram_f2_ctl->dev,
-						    EDAC_MOD_STR);
+			edac_pci_create_generic_ctl(&pvt->F2->dev, EDAC_MOD_STR);
 
 		if (!amd64_ctl_pci) {
 			pr_warning("%s(): Unable to create PCI control\n",
@@ -2910,51 +2764,50 @@ static void amd64_setup_pci_device(void)
 
 static int __init amd64_edac_init(void)
 {
-	int nb, err = -ENODEV;
-	bool load_ok = false;
+	int err = -ENODEV;
 
 	edac_printk(KERN_INFO, EDAC_MOD_STR, EDAC_AMD64_VERSION "\n");
 
 	opstate_init();
 
-	if (cache_k8_northbridges() < 0)
+	if (amd_cache_northbridges() < 0)
+		goto err_ret;
+
+	err = -ENOMEM;
+	mcis	  = kzalloc(amd_nb_num() * sizeof(mcis[0]), GFP_KERNEL);
+	ecc_stngs = kzalloc(amd_nb_num() * sizeof(ecc_stngs[0]), GFP_KERNEL);
+	if (!(mcis && ecc_stngs))
 		goto err_ret;
 
 	msrs = msrs_alloc();
 	if (!msrs)
-		goto err_ret;
+		goto err_free;
 
 	err = pci_register_driver(&amd64_pci_driver);
 	if (err)
 		goto err_pci;
 
-	/*
-	 * At this point, the array 'pvt_lookup[]' contains pointers to alloc'd
-	 * amd64_pvt structs. These will be used in the 2nd stage init function
-	 * to finish initialization of the MC instances.
-	 */
 	err = -ENODEV;
-	for (nb = 0; nb < k8_northbridges.num; nb++) {
-		if (!pvt_lookup[nb])
-			continue;
-
-		err = amd64_init_2nd_stage(pvt_lookup[nb]);
-		if (err)
-			goto err_2nd_stage;
+	if (!atomic_read(&drv_instances))
+		goto err_no_instances;
 
-		load_ok = true;
-	}
-
-	if (load_ok) {
-		amd64_setup_pci_device();
-		return 0;
-	}
+	setup_pci_device();
+	return 0;
 
-err_2nd_stage:
+err_no_instances:
 	pci_unregister_driver(&amd64_pci_driver);
+
 err_pci:
 	msrs_free(msrs);
 	msrs = NULL;
+
+err_free:
+	kfree(mcis);
+	mcis = NULL;
+
+	kfree(ecc_stngs);
+	ecc_stngs = NULL;
+
 err_ret:
 	return err;
 }
@@ -2966,6 +2819,12 @@ static void __exit amd64_edac_exit(void)
 
 	pci_unregister_driver(&amd64_pci_driver);
 
+	kfree(ecc_stngs);
+	ecc_stngs = NULL;
+
+	kfree(mcis);
+	mcis = NULL;
+
 	msrs_free(msrs);
 	msrs = NULL;
 }
diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
index 044aee4f944..613ec72b0f6 100644
--- a/drivers/edac/amd64_edac.h
+++ b/drivers/edac/amd64_edac.h
@@ -74,11 +74,26 @@
 #include "edac_core.h"
 #include "mce_amd.h"
 
-#define amd64_printk(level, fmt, arg...) \
-	edac_printk(level, "amd64", fmt, ##arg)
+#define amd64_debug(fmt, arg...) \
+	edac_printk(KERN_DEBUG, "amd64", fmt, ##arg)
 
-#define amd64_mc_printk(mci, level, fmt, arg...) \
-	edac_mc_chipset_printk(mci, level, "amd64", fmt, ##arg)
+#define amd64_info(fmt, arg...) \
+	edac_printk(KERN_INFO, "amd64", fmt, ##arg)
+
+#define amd64_notice(fmt, arg...) \
+	edac_printk(KERN_NOTICE, "amd64", fmt, ##arg)
+
+#define amd64_warn(fmt, arg...) \
+	edac_printk(KERN_WARNING, "amd64", fmt, ##arg)
+
+#define amd64_err(fmt, arg...) \
+	edac_printk(KERN_ERR, "amd64", fmt, ##arg)
+
+#define amd64_mc_warn(mci, fmt, arg...) \
+	edac_mc_chipset_printk(mci, KERN_WARNING, "amd64", fmt, ##arg)
+
+#define amd64_mc_err(mci, fmt, arg...) \
+	edac_mc_chipset_printk(mci, KERN_ERR, "amd64", fmt, ##arg)
 
 /*
  * Throughout the comments in this code, the following terms are used:
@@ -129,11 +144,9 @@
  *         sections 3.5.4 and 3.5.5 for more information.
  */
 
-#define EDAC_AMD64_VERSION		" Ver: 3.3.0 " __DATE__
+#define EDAC_AMD64_VERSION		"v3.3.0"
 #define EDAC_MOD_STR			"amd64_edac"
 
-#define EDAC_MAX_NUMNODES		8
-
 /* Extended Model from CPUID, for CPU Revision numbers */
 #define K8_REV_D			1
 #define K8_REV_E			2
@@ -322,9 +335,6 @@
 #define K8_SCRCTRL			0x58
 
 #define F10_NB_CFG_LOW			0x88
-#define	F10_NB_CFG_LOW_ENABLE_EXT_CFG	BIT(14)
-
-#define F10_NB_CFG_HIGH			0x8C
 
 #define F10_ONLINE_SPARE		0xB0
 #define F10_ONLINE_SPARE_SWAPDONE0(x)	((x) & BIT(1))
@@ -373,7 +383,6 @@ static inline int get_node_id(struct pci_dev *pdev)
 enum amd64_chipset_families {
 	K8_CPUS = 0,
 	F10_CPUS,
-	F11_CPUS,
 };
 
 /* Error injection control structure */
@@ -384,16 +393,13 @@ struct error_injection {
 };
 
 struct amd64_pvt {
+	struct low_ops *ops;
+
 	/* pci_device handles which we utilize */
-	struct pci_dev *addr_f1_ctl;
-	struct pci_dev *dram_f2_ctl;
-	struct pci_dev *misc_f3_ctl;
+	struct pci_dev *F1, *F2, *F3;
 
 	int mc_node_id;		/* MC index of this MC node */
 	int ext_model;		/* extended model value of this node */
-
-	struct low_ops *ops;	/* pointer to per PCI Device ID func table */
-
 	int channel_count;
 
 	/* Raw registers */
@@ -455,27 +461,27 @@ struct amd64_pvt {
 	/* place to store error injection parameters prior to issue */
 	struct error_injection injection;
 
-	/* Save old hw registers' values before we modified them */
-	u32 nbctl_mcgctl_saved;		/* When true, following 2 are valid */
-	u32 old_nbctl;
+	/* DCT per-family scrubrate setting */
+	u32 min_scrubrate;
 
-	/* MC Type Index value: socket F vs Family 10h */
-	u32 mc_type_index;
+	/* family name this instance is running on */
+	const char *ctl_name;
+
+};
+
+/*
+ * per-node ECC settings descriptor
+ */
+struct ecc_settings {
+	u32 old_nbctl;
+	bool nbctl_valid;
 
-	/* misc settings */
 	struct flags {
-		unsigned long cf8_extcfg:1;
 		unsigned long nb_mce_enable:1;
 		unsigned long nb_ecc_prev:1;
 	} flags;
 };
 
-struct scrubrate {
-       u32 scrubval;           /* bit pattern for scrub rate */
-       u32 bandwidth;          /* bandwidth consumed (bytes/sec) */
-};
-
-extern struct scrubrate scrubrates[23];
 extern const char *tt_msgs[4];
 extern const char *ll_msgs[4];
 extern const char *rrrr_msgs[16];
@@ -517,23 +523,10 @@ struct low_ops {
 
 struct amd64_family_type {
 	const char *ctl_name;
-	u16 addr_f1_ctl;
-	u16 misc_f3_ctl;
+	u16 f1_id, f3_id;
 	struct low_ops ops;
 };
 
-static struct amd64_family_type amd64_family_types[];
-
-static inline const char *get_amd_family_name(int index)
-{
-	return amd64_family_types[index].ctl_name;
-}
-
-static inline struct low_ops *family_ops(int index)
-{
-	return &amd64_family_types[index].ops;
-}
-
 static inline int amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
 					   u32 *val, const char *func)
 {
@@ -541,8 +534,8 @@ static inline int amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
 
 	err = pci_read_config_dword(pdev, offset, val);
 	if (err)
-		amd64_printk(KERN_WARNING, "%s: error reading F%dx%x.\n",
-			     func, PCI_FUNC(pdev->devfn), offset);
+		amd64_warn("%s: error reading F%dx%x.\n",
+			   func, PCI_FUNC(pdev->devfn), offset);
 
 	return err;
 }
@@ -556,7 +549,6 @@ static inline int amd64_read_pci_cfg_dword(struct pci_dev *pdev, int offset,
  */
 #define K8_MIN_SCRUB_RATE_BITS	0x0
 #define F10_MIN_SCRUB_RATE_BITS	0x5
-#define F11_MIN_SCRUB_RATE_BITS	0x6
 
 int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
 			     u64 *hole_offset, u64 *hole_size);
diff --git a/drivers/edac/amd64_edac_inj.c b/drivers/edac/amd64_edac_inj.c
index 29f1f7a612d..688478de1cb 100644
--- a/drivers/edac/amd64_edac_inj.c
+++ b/drivers/edac/amd64_edac_inj.c
@@ -23,9 +23,7 @@ static ssize_t amd64_inject_section_store(struct mem_ctl_info *mci,
 	if (ret != -EINVAL) {
 
 		if (value > 3) {
-			amd64_printk(KERN_WARNING,
-				     "%s: invalid section 0x%lx\n",
-				     __func__, value);
+			amd64_warn("%s: invalid section 0x%lx\n", __func__, value);
 			return -EINVAL;
 		}
 
@@ -58,9 +56,7 @@ static ssize_t amd64_inject_word_store(struct mem_ctl_info *mci,
 	if (ret != -EINVAL) {
 
 		if (value > 8) {
-			amd64_printk(KERN_WARNING,
-				     "%s: invalid word 0x%lx\n",
-				     __func__, value);
+			amd64_warn("%s: invalid word 0x%lx\n", __func__, value);
 			return -EINVAL;
 		}
 
@@ -92,9 +88,8 @@ static ssize_t amd64_inject_ecc_vector_store(struct mem_ctl_info *mci,
 	if (ret != -EINVAL) {
 
 		if (value & 0xFFFF0000) {
-			amd64_printk(KERN_WARNING,
-				     "%s: invalid EccVector: 0x%lx\n",
-				     __func__, value);
+			amd64_warn("%s: invalid EccVector: 0x%lx\n",
+				   __func__, value);
 			return -EINVAL;
 		}
 
@@ -122,15 +117,13 @@ static ssize_t amd64_inject_read_store(struct mem_ctl_info *mci,
 		/* Form value to choose 16-byte section of cacheline */
 		section = F10_NB_ARRAY_DRAM_ECC |
 				SET_NB_ARRAY_ADDRESS(pvt->injection.section);
-		pci_write_config_dword(pvt->misc_f3_ctl,
-					F10_NB_ARRAY_ADDR, section);
+		pci_write_config_dword(pvt->F3, F10_NB_ARRAY_ADDR, section);
 
 		word_bits = SET_NB_DRAM_INJECTION_READ(pvt->injection.word,
 						pvt->injection.bit_map);
 
 		/* Issue 'word' and 'bit' along with the READ request */
-		pci_write_config_dword(pvt->misc_f3_ctl,
-					F10_NB_ARRAY_DATA, word_bits);
+		pci_write_config_dword(pvt->F3, F10_NB_ARRAY_DATA, word_bits);
 
 		debugf0("section=0x%x word_bits=0x%x\n", section, word_bits);
 
@@ -157,15 +150,13 @@ static ssize_t amd64_inject_write_store(struct mem_ctl_info *mci,
 		/* Form value to choose 16-byte section of cacheline */
 		section = F10_NB_ARRAY_DRAM_ECC |
 				SET_NB_ARRAY_ADDRESS(pvt->injection.section);
-		pci_write_config_dword(pvt->misc_f3_ctl,
-					F10_NB_ARRAY_ADDR, section);
+		pci_write_config_dword(pvt->F3, F10_NB_ARRAY_ADDR, section);
 
 		word_bits = SET_NB_DRAM_INJECTION_WRITE(pvt->injection.word,
 						pvt->injection.bit_map);
 
 		/* Issue 'word' and 'bit' along with the READ request */
-		pci_write_config_dword(pvt->misc_f3_ctl,
-					F10_NB_ARRAY_DATA, word_bits);
+		pci_write_config_dword(pvt->F3, F10_NB_ARRAY_DATA, word_bits);
 
 		debugf0("section=0x%x word_bits=0x%x\n", section, word_bits);
 
diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c
index 1609a19df49..b9a781c47e3 100644
--- a/drivers/edac/cpc925_edac.c
+++ b/drivers/edac/cpc925_edac.c
@@ -818,9 +818,10 @@ static void cpc925_del_edac_devices(void)
 }
 
 /* Convert current back-ground scrub rate into byte/sec bandwith */
-static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci)
 {
 	struct cpc925_mc_pdata *pdata = mci->pvt_info;
+	int bw;
 	u32 mscr;
 	u8 si;
 
@@ -832,11 +833,11 @@ static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
 	if (((mscr & MSCR_SCRUB_MOD_MASK) != MSCR_BACKGR_SCRUB) ||
 	    (si == 0)) {
 		cpc925_mc_printk(mci, KERN_INFO, "Scrub mode not enabled\n");
-		*bw = 0;
+		bw = 0;
 	} else
-		*bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si;
+		bw = CPC925_SCRUB_BLOCK_SIZE * 0xFA67 / si;
 
-	return 0;
+	return bw;
 }
 
 /* Return 0 for single channel; 1 for dual channel */
diff --git a/drivers/edac/e752x_edac.c b/drivers/edac/e752x_edac.c
index 073f5a06d23..ec302d42658 100644
--- a/drivers/edac/e752x_edac.c
+++ b/drivers/edac/e752x_edac.c
@@ -983,11 +983,11 @@ static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
 
 	pci_write_config_word(pdev, E752X_MCHSCRB, scrubrates[i].scrubval);
 
-	return 0;
+	return scrubrates[i].bandwidth;
 }
 
 /* Convert current scrub rate value into byte/sec bandwidth */
-static int get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
+static int get_sdram_scrub_rate(struct mem_ctl_info *mci)
 {
 	const struct scrubrate *scrubrates;
 	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
@@ -1013,10 +1013,8 @@ static int get_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
 			"Invalid sdram scrub control value: 0x%x\n", scrubval);
 		return -1;
 	}
+	return scrubrates[i].bandwidth;
 
-	*bw = scrubrates[i].bandwidth;
-
-	return 0;
 }
 
 /* Return 1 if dual channel mode is active.  Else return 0. */
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index d7ca43a828b..ff1eb7bb26c 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -41,10 +41,10 @@
 #define MC_PROC_NAME_MAX_LEN	7
 
 #if PAGE_SHIFT < 20
-#define PAGES_TO_MiB( pages )	( ( pages ) >> ( 20 - PAGE_SHIFT ) )
-#define MiB_TO_PAGES(mb)	((mb) >> (20 - PAGE_SHIFT))
+#define PAGES_TO_MiB(pages)	((pages) >> (20 - PAGE_SHIFT))
+#define MiB_TO_PAGES(mb)	((mb) << (20 - PAGE_SHIFT))
 #else				/* PAGE_SHIFT > 20 */
-#define PAGES_TO_MiB( pages )	( ( pages ) << ( PAGE_SHIFT - 20 ) )
+#define PAGES_TO_MiB(pages)	((pages) << (PAGE_SHIFT - 20))
 #define MiB_TO_PAGES(mb)	((mb) >> (PAGE_SHIFT - 20))
 #endif
 
@@ -68,9 +68,10 @@
 #define EDAC_PCI "PCI"
 #define EDAC_DEBUG "DEBUG"
 
+extern const char *edac_mem_types[];
+
 #ifdef CONFIG_EDAC_DEBUG
 extern int edac_debug_level;
-extern const char *edac_mem_types[];
 
 #define edac_debug_printk(level, fmt, arg...)                           \
 	do {                                                            \
@@ -386,7 +387,7 @@ struct mem_ctl_info {
 	   representation and converts it to the closest matching
 	   bandwith in bytes/sec.
 	 */
-	int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 * bw);
+	int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
 
 
 	/* pointer to edac checking routine */
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index ba6586a69cc..a4e9db2d652 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -76,6 +76,8 @@ static void edac_mc_dump_mci(struct mem_ctl_info *mci)
 	debugf3("\tpvt_info = %p\n\n", mci->pvt_info);
 }
 
+#endif				/* CONFIG_EDAC_DEBUG */
+
 /*
  * keep those in sync with the enum mem_type
  */
@@ -100,8 +102,6 @@ const char *edac_mem_types[] = {
 };
 EXPORT_SYMBOL_GPL(edac_mem_types);
 
-#endif				/* CONFIG_EDAC_DEBUG */
-
 /* 'ptr' points to a possibly unaligned item X such that sizeof(X) is 'size'.
  * Adjust 'ptr' so that its alignment is at least as stringent as what the
  * compiler would provide for X and return the aligned result.
@@ -586,14 +586,16 @@ struct mem_ctl_info *edac_mc_del_mc(struct device *dev)
 		return NULL;
 	}
 
-	/* marking MCI offline */
-	mci->op_state = OP_OFFLINE;
-
 	del_mc_from_global_list(mci);
 	mutex_unlock(&mem_ctls_mutex);
 
-	/* flush workq processes and remove sysfs */
+	/* flush workq processes */
 	edac_mc_workq_teardown(mci);
+
+	/* marking MCI offline */
+	mci->op_state = OP_OFFLINE;
+
+	/* remove from sysfs */
 	edac_remove_sysfs_mci_device(mci);
 
 	edac_printk(KERN_INFO, EDAC_MC,
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index dce61f7ba38..39d97cfdf58 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -436,56 +436,55 @@ static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci,
 	return count;
 }
 
-/* memory scrubbing */
+/* Memory scrubbing interface:
+ *
+ * A MC driver can limit the scrubbing bandwidth based on the CPU type.
+ * Therefore, ->set_sdram_scrub_rate should be made to return the actual
+ * bandwidth that is accepted or 0 when scrubbing is to be disabled.
+ *
+ * Negative value still means that an error has occurred while setting
+ * the scrub rate.
+ */
 static ssize_t mci_sdram_scrub_rate_store(struct mem_ctl_info *mci,
 					  const char *data, size_t count)
 {
 	unsigned long bandwidth = 0;
-	int err;
+	int new_bw = 0;
 
-	if (!mci->set_sdram_scrub_rate) {
-		edac_printk(KERN_WARNING, EDAC_MC,
-			    "Memory scrub rate setting not implemented!\n");
+	if (!mci->set_sdram_scrub_rate)
 		return -EINVAL;
-	}
 
 	if (strict_strtoul(data, 10, &bandwidth) < 0)
 		return -EINVAL;
 
-	err = mci->set_sdram_scrub_rate(mci, (u32)bandwidth);
-	if (err) {
-		edac_printk(KERN_DEBUG, EDAC_MC,
-			    "Failed setting scrub rate to %lu\n", bandwidth);
-		return -EINVAL;
-	}
-	else {
-		edac_printk(KERN_DEBUG, EDAC_MC,
-			    "Scrub rate set to: %lu\n", bandwidth);
+	new_bw = mci->set_sdram_scrub_rate(mci, bandwidth);
+	if (new_bw >= 0) {
+		edac_printk(KERN_DEBUG, EDAC_MC, "Scrub rate set to %d\n", new_bw);
 		return count;
 	}
+
+	edac_printk(KERN_DEBUG, EDAC_MC, "Error setting scrub rate to: %lu\n", bandwidth);
+	return -EINVAL;
 }
 
+/*
+ * ->get_sdram_scrub_rate() return value semantics same as above.
+ */
 static ssize_t mci_sdram_scrub_rate_show(struct mem_ctl_info *mci, char *data)
 {
-	u32 bandwidth = 0;
-	int err;
+	int bandwidth = 0;
 
-	if (!mci->get_sdram_scrub_rate) {
-		edac_printk(KERN_WARNING, EDAC_MC,
-			    "Memory scrub rate reading not implemented\n");
+	if (!mci->get_sdram_scrub_rate)
 		return -EINVAL;
-	}
 
-	err = mci->get_sdram_scrub_rate(mci, &bandwidth);
-	if (err) {
+	bandwidth = mci->get_sdram_scrub_rate(mci);
+	if (bandwidth < 0) {
 		edac_printk(KERN_DEBUG, EDAC_MC, "Error reading scrub rate\n");
-		return err;
-	}
-	else {
-		edac_printk(KERN_DEBUG, EDAC_MC,
-			    "Read scrub rate: %d\n", bandwidth);
-		return sprintf(data, "%d\n", bandwidth);
+		return bandwidth;
 	}
+
+	edac_printk(KERN_DEBUG, EDAC_MC, "Read scrub rate: %d\n", bandwidth);
+	return sprintf(data, "%d\n", bandwidth);
 }
 
 /* default attribute files for the MCI object */
diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index f459a6c0886..0448da0af75 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -611,20 +611,17 @@ static int i5100_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
 
 	bandwidth = 5900000 * i5100_mc_scrben(dw);
 
-	return 0;
+	return bandwidth;
 }
 
-static int i5100_get_scrub_rate(struct mem_ctl_info *mci,
-				u32 *bandwidth)
+static int i5100_get_scrub_rate(struct mem_ctl_info *mci)
 {
 	struct i5100_priv *priv = mci->pvt_info;
 	u32 dw;
 
 	pci_read_config_dword(priv->mc, I5100_MC, &dw);
 
-	*bandwidth = 5900000 * i5100_mc_scrben(dw);
-
-	return 0;
+	return 5900000 * i5100_mc_scrben(dw);
 }
 
 static struct pci_dev *pci_get_device_func(unsigned vendor,
diff --git a/drivers/edac/mce_amd.c b/drivers/edac/mce_amd.c
index c0181093b49..f6cf73d9335 100644
--- a/drivers/edac/mce_amd.c
+++ b/drivers/edac/mce_amd.c
@@ -5,6 +5,7 @@
 
 static struct amd_decoder_ops *fam_ops;
 
+static u8 xec_mask	 = 0xf;
 static u8 nb_err_cpumask = 0xf;
 
 static bool report_gart_errors;
@@ -74,57 +75,104 @@ static const char *f10h_nb_mce_desc[] = {
 	"ECC Error in the Probe Filter directory"
 };
 
-static bool f12h_dc_mce(u16 ec)
+static const char * const f15h_ic_mce_desc[] = {
+	"UC during a demand linefill from L2",
+	"Parity error during data load from IC",
+	"Parity error for IC valid bit",
+	"Main tag parity error",
+	"Parity error in prediction queue",
+	"PFB data/address parity error",
+	"Parity error in the branch status reg",
+	"PFB promotion address error",
+	"Tag error during probe/victimization",
+	"Parity error for IC probe tag valid bit",
+	"PFB non-cacheable bit parity error",
+	"PFB valid bit parity error",			/* xec = 0xd */
+	"patch RAM",					/* xec = 010 */
+	"uop queue",
+	"insn buffer",
+	"predecode buffer",
+	"fetch address FIFO"
+};
+
+static const char * const f15h_cu_mce_desc[] = {
+	"Fill ECC error on data fills",			/* xec = 0x4 */
+	"Fill parity error on insn fills",
+	"Prefetcher request FIFO parity error",
+	"PRQ address parity error",
+	"PRQ data parity error",
+	"WCC Tag ECC error",
+	"WCC Data ECC error",
+	"WCB Data parity error",
+	"VB Data/ECC error",
+	"L2 Tag ECC error",				/* xec = 0x10 */
+	"Hard L2 Tag ECC error",
+	"Multiple hits on L2 tag",
+	"XAB parity error",
+	"PRB address parity error"
+};
+
+static const char * const fr_ex_mce_desc[] = {
+	"CPU Watchdog timer expire",
+	"Wakeup array dest tag",
+	"AG payload array",
+	"EX payload array",
+	"IDRF array",
+	"Retire dispatch queue",
+	"Mapper checkpoint array",
+	"Physical register file EX0 port",
+	"Physical register file EX1 port",
+	"Physical register file AG0 port",
+	"Physical register file AG1 port",
+	"Flag register file",
+	"DE correctable error could not be corrected"
+};
+
+static bool f12h_dc_mce(u16 ec, u8 xec)
 {
 	bool ret = false;
 
 	if (MEM_ERROR(ec)) {
-		u8 ll = ec & 0x3;
+		u8 ll = LL(ec);
 		ret = true;
 
 		if (ll == LL_L2)
 			pr_cont("during L1 linefill from L2.\n");
 		else if (ll == LL_L1)
-			pr_cont("Data/Tag %s error.\n", RRRR_MSG(ec));
+			pr_cont("Data/Tag %s error.\n", R4_MSG(ec));
 		else
 			ret = false;
 	}
 	return ret;
 }
 
-static bool f10h_dc_mce(u16 ec)
+static bool f10h_dc_mce(u16 ec, u8 xec)
 {
-	u8 r4  = (ec >> 4) & 0xf;
-	u8 ll  = ec & 0x3;
-
-	if (r4 == R4_GEN && ll == LL_L1) {
+	if (R4(ec) == R4_GEN && LL(ec) == LL_L1) {
 		pr_cont("during data scrub.\n");
 		return true;
 	}
-	return f12h_dc_mce(ec);
+	return f12h_dc_mce(ec, xec);
 }
 
-static bool k8_dc_mce(u16 ec)
+static bool k8_dc_mce(u16 ec, u8 xec)
 {
 	if (BUS_ERROR(ec)) {
 		pr_cont("during system linefill.\n");
 		return true;
 	}
 
-	return f10h_dc_mce(ec);
+	return f10h_dc_mce(ec, xec);
 }
 
-static bool f14h_dc_mce(u16 ec)
+static bool f14h_dc_mce(u16 ec, u8 xec)
 {
-	u8 r4	 = (ec >> 4) & 0xf;
-	u8 ll	 = ec & 0x3;
-	u8 tt	 = (ec >> 2) & 0x3;
-	u8 ii	 = tt;
+	u8 r4	 = R4(ec);
 	bool ret = true;
 
 	if (MEM_ERROR(ec)) {
 
-		if (tt != TT_DATA || ll != LL_L1)
+		if (TT(ec) != TT_DATA || LL(ec) != LL_L1)
 			return false;
 
 		switch (r4) {
@@ -144,7 +192,7 @@ static bool f14h_dc_mce(u16 ec)
 		}
 	} else if (BUS_ERROR(ec)) {
 
-		if ((ii != II_MEM && ii != II_IO) || ll != LL_LG)
+		if ((II(ec) != II_MEM && II(ec) != II_IO) || LL(ec) != LL_LG)
 			return false;
 
 		pr_cont("System read data error on a ");
@@ -169,39 +217,78 @@ static bool f14h_dc_mce(u16 ec)
 	return ret;
 }
 
+static bool f15h_dc_mce(u16 ec, u8 xec)
+{
+	bool ret = true;
+
+	if (MEM_ERROR(ec)) {
+
+		switch (xec) {
+		case 0x0:
+			pr_cont("Data Array access error.\n");
+			break;
+
+		case 0x1:
+			pr_cont("UC error during a linefill from L2/NB.\n");
+			break;
+
+		case 0x2:
+		case 0x11:
+			pr_cont("STQ access error.\n");
+			break;
+
+		case 0x3:
+			pr_cont("SCB access error.\n");
+			break;
+
+		case 0x10:
+			pr_cont("Tag error.\n");
+			break;
+
+		case 0x12:
+			pr_cont("LDQ access error.\n");
+			break;
+
+		default:
+			ret = false;
+		}
+	} else if (BUS_ERROR(ec)) {
+
+		if (!xec)
+			pr_cont("during system linefill.\n");
+		else
+			pr_cont(" Internal %s condition.\n",
+				((xec == 1) ? "livelock" : "deadlock"));
+	} else
+		ret = false;
+
+	return ret;
+}
+
 static void amd_decode_dc_mce(struct mce *m)
 {
-	u16 ec = m->status & 0xffff;
-	u8 xec = (m->status >> 16) & 0xf;
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, xec_mask);
 
 	pr_emerg(HW_ERR "Data Cache Error: ");
 
 	/* TLB error signatures are the same across families */
 	if (TLB_ERROR(ec)) {
-		u8 tt = (ec >> 2) & 0x3;
-
-		if (tt == TT_DATA) {
+		if (TT(ec) == TT_DATA) {
 			pr_cont("%s TLB %s.\n", LL_MSG(ec),
-				(xec ? "multimatch" : "parity error"));
+				((xec == 2) ? "locked miss"
+					    : (xec ? "multimatch" : "parity")));
 			return;
 		}
-		else
-			goto wrong_dc_mce;
-	}
-
-	if (!fam_ops->dc_mce(ec))
-		goto wrong_dc_mce;
-
-	return;
-
-wrong_dc_mce:
-	pr_emerg(HW_ERR "Corrupted DC MCE info?\n");
+	} else if (fam_ops->dc_mce(ec, xec))
+		;
+	else
+		pr_emerg(HW_ERR "Corrupted DC MCE info?\n");
 }
 
-static bool k8_ic_mce(u16 ec)
+static bool k8_ic_mce(u16 ec, u8 xec)
 {
-	u8 ll	 = ec & 0x3;
-	u8 r4	 = (ec >> 4) & 0xf;
+	u8 ll	 = LL(ec);
 	bool ret = true;
 
 	if (!MEM_ERROR(ec))
@@ -210,7 +297,7 @@ static bool k8_ic_mce(u16 ec)
 	if (ll == 0x2)
 		pr_cont("during a linefill from L2.\n");
 	else if (ll == 0x1) {
-		switch (r4) {
+		switch (R4(ec)) {
 		case R4_IRD:
 			pr_cont("Parity error during data load.\n");
 			break;
@@ -233,15 +320,13 @@ static bool k8_ic_mce(u16 ec)
 	return ret;
 }
 
-static bool f14h_ic_mce(u16 ec)
+static bool f14h_ic_mce(u16 ec, u8 xec)
 {
-	u8 ll    = ec & 0x3;
-	u8 tt    = (ec >> 2) & 0x3;
-	u8 r4  = (ec >> 4) & 0xf;
+	u8 r4    = R4(ec);
 	bool ret = true;
 
 	if (MEM_ERROR(ec)) {
-		if (tt != 0 || ll != 1)
+		if (TT(ec) != 0 || LL(ec) != 1)
 			ret = false;
 
 		if (r4 == R4_IRD)
@@ -254,10 +339,36 @@ static bool f14h_ic_mce(u16 ec)
 	return ret;
 }
 
+static bool f15h_ic_mce(u16 ec, u8 xec)
+{
+	bool ret = true;
+
+	if (!MEM_ERROR(ec))
+		return false;
+
+	switch (xec) {
+	case 0x0 ... 0xa:
+		pr_cont("%s.\n", f15h_ic_mce_desc[xec]);
+		break;
+
+	case 0xd:
+		pr_cont("%s.\n", f15h_ic_mce_desc[xec-2]);
+		break;
+
+	case 0x10 ... 0x14:
+		pr_cont("Decoder %s parity error.\n", f15h_ic_mce_desc[xec-4]);
+		break;
+
+	default:
+		ret = false;
+	}
+	return ret;
+}
+
 static void amd_decode_ic_mce(struct mce *m)
 {
-	u16 ec = m->status & 0xffff;
-	u8 xec = (m->status >> 16) & 0xf;
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, xec_mask);
 
 	pr_emerg(HW_ERR "Instruction Cache Error: ");
 
@@ -268,7 +379,7 @@ static void amd_decode_ic_mce(struct mce *m)
 		bool k8 = (boot_cpu_data.x86 == 0xf && (m->status & BIT_64(58)));
 
 		pr_cont("during %s.\n", (k8 ? "system linefill" : "NB data read"));
-	} else if (fam_ops->ic_mce(ec))
+	} else if (fam_ops->ic_mce(ec, xec))
 		;
 	else
 		pr_emerg(HW_ERR "Corrupted IC MCE info?\n");
@@ -276,8 +387,8 @@ static void amd_decode_ic_mce(struct mce *m)
 
 static void amd_decode_bu_mce(struct mce *m)
 {
-	u32 ec = m->status & 0xffff;
-	u32 xec = (m->status >> 16) & 0xf;
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, xec_mask);
 
 	pr_emerg(HW_ERR "Bus Unit Error");
 
@@ -286,23 +397,23 @@ static void amd_decode_bu_mce(struct mce *m)
 	else if (xec == 0x3)
 		pr_cont(" in the victim data buffers.\n");
 	else if (xec == 0x2 && MEM_ERROR(ec))
-		pr_cont(": %s error in the L2 cache tags.\n", RRRR_MSG(ec));
+		pr_cont(": %s error in the L2 cache tags.\n", R4_MSG(ec));
 	else if (xec == 0x0) {
 		if (TLB_ERROR(ec))
 			pr_cont(": %s error in a Page Descriptor Cache or "
 				"Guest TLB.\n", TT_MSG(ec));
 		else if (BUS_ERROR(ec))
 			pr_cont(": %s/ECC error in data read from NB: %s.\n",
-				RRRR_MSG(ec), PP_MSG(ec));
+				R4_MSG(ec), PP_MSG(ec));
 		else if (MEM_ERROR(ec)) {
-			u8 rrrr = (ec >> 4) & 0xf;
+			u8 r4 = R4(ec);
 
-			if (rrrr >= 0x7)
+			if (r4 >= 0x7)
 				pr_cont(": %s error during data copyback.\n",
-					RRRR_MSG(ec));
-			else if (rrrr <= 0x1)
+					R4_MSG(ec));
+			else if (r4 <= 0x1)
 				pr_cont(": %s parity/ECC error during data "
-					"access from L2.\n", RRRR_MSG(ec));
+					"access from L2.\n", R4_MSG(ec));
 			else
 				goto wrong_bu_mce;
 		} else
@@ -316,12 +427,52 @@ wrong_bu_mce:
 	pr_emerg(HW_ERR "Corrupted BU MCE info?\n");
 }
 
+static void amd_decode_cu_mce(struct mce *m)
+{
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, xec_mask);
+
+	pr_emerg(HW_ERR "Combined Unit Error: ");
+
+	if (TLB_ERROR(ec)) {
+		if (xec == 0x0)
+			pr_cont("Data parity TLB read error.\n");
+		else if (xec == 0x1)
+			pr_cont("Poison data provided for TLB fill.\n");
+		else
+			goto wrong_cu_mce;
+	} else if (BUS_ERROR(ec)) {
+		if (xec > 2)
+			goto wrong_cu_mce;
+
+		pr_cont("Error during attempted NB data read.\n");
+	} else if (MEM_ERROR(ec)) {
+		switch (xec) {
+		case 0x4 ... 0xc:
+			pr_cont("%s.\n", f15h_cu_mce_desc[xec - 0x4]);
+			break;
+
+		case 0x10 ... 0x14:
+			pr_cont("%s.\n", f15h_cu_mce_desc[xec - 0x7]);
+			break;
+
+		default:
+			goto wrong_cu_mce;
+		}
+	}
+
+	return;
+
+wrong_cu_mce:
+	pr_emerg(HW_ERR "Corrupted CU MCE info?\n");
+}
+
 static void amd_decode_ls_mce(struct mce *m)
 {
-	u16 ec = m->status & 0xffff;
-	u8 xec = (m->status >> 16) & 0xf;
+	u16 ec = EC(m->status);
+	u8 xec = XEC(m->status, xec_mask);
 
-	if (boot_cpu_data.x86 == 0x14) {
+	if (boot_cpu_data.x86 >= 0x14) {
 		pr_emerg("You shouldn't be seeing an LS MCE on this cpu family,"
 			 " please report on LKML.\n");
 		return;
@@ -330,12 +481,12 @@ static void amd_decode_ls_mce(struct mce *m)
 	pr_emerg(HW_ERR "Load Store Error");
 
 	if (xec == 0x0) {
-		u8 r4 = (ec >> 4) & 0xf;
+		u8 r4 = R4(ec);
 
 		if (!BUS_ERROR(ec) || (r4 != R4_DRD && r4 != R4_DWR))
 			goto wrong_ls_mce;
 
-		pr_cont(" during %s.\n", RRRR_MSG(ec));
+		pr_cont(" during %s.\n", R4_MSG(ec));
 	} else
 		goto wrong_ls_mce;
 
@@ -410,6 +561,15 @@ static bool f10h_nb_mce(u16 ec, u8 xec)
 		goto out;
 		break;
 
+	case 0x19:
+		if (boot_cpu_data.x86 == 0x15)
+			pr_cont("Compute Unit Data Error.\n");
+		else
+			ret = false;
+
+		goto out;
+		break;
+
 	case 0x1c ... 0x1f:
 		offset = 24;
 		break;
@@ -434,27 +594,30 @@ static bool nb_noop_mce(u16 ec, u8 xec)
 
 void amd_decode_nb_mce(int node_id, struct mce *m, u32 nbcfg)
 {
-	u8 xec   = (m->status >> 16) & 0x1f;
-	u16 ec   = m->status & 0xffff;
+	u16 ec   = EC(m->status);
+	u8 xec   = XEC(m->status, 0x1f);
 	u32 nbsh = (u32)(m->status >> 32);
+	int core = -1;
 
-	pr_emerg(HW_ERR "Northbridge Error, node %d: ", node_id);
+	pr_emerg(HW_ERR "Northbridge Error (node %d", node_id);
 
-	/*
-	 * F10h, revD can disable ErrCpu[3:0] so check that first and also the
-	 * value encoding has changed so interpret those differently
-	 */
+	/* F10h, revD can disable ErrCpu[3:0] through ErrCpuVal */
 	if ((boot_cpu_data.x86 == 0x10) &&
 	    (boot_cpu_data.x86_model > 7)) {
 		if (nbsh & K8_NBSH_ERR_CPU_VAL)
-			pr_cont(", core: %u", (u8)(nbsh & nb_err_cpumask));
+			core = nbsh & nb_err_cpumask;
 	} else {
 		u8 assoc_cpus = nbsh & nb_err_cpumask;
 
 		if (assoc_cpus > 0)
-			pr_cont(", core: %d", fls(assoc_cpus) - 1);
+			core = fls(assoc_cpus) - 1;
 	}
 
+	if (core >= 0)
+		pr_cont(", core %d): ", core);
+	else
+		pr_cont("): ");
+
 	switch (xec) {
 	case 0x2:
 		pr_cont("Sync error (sync packets on HT link detected).\n");
@@ -496,35 +659,89 @@ EXPORT_SYMBOL_GPL(amd_decode_nb_mce);
 
 static void amd_decode_fr_mce(struct mce *m)
 {
-	if (boot_cpu_data.x86 == 0xf ||
-	    boot_cpu_data.x86 == 0x11)
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+	u8 xec = XEC(m->status, xec_mask);
+
+	if (c->x86 == 0xf || c->x86 == 0x11)
 		goto wrong_fr_mce;
 
-	/* we have only one error signature so match all fields at once. */
-	if ((m->status & 0xffff) == 0x0f0f) {
-		pr_emerg(HW_ERR "FR Error: CPU Watchdog timer expire.\n");
-		return;
-	}
+	if (c->x86 != 0x15 && xec != 0x0)
+		goto wrong_fr_mce;
+
+	pr_emerg(HW_ERR "%s Error: ",
+		 (c->x86 == 0x15 ? "Execution Unit" : "FIROB"));
+
+	if (xec == 0x0 || xec == 0xc)
+		pr_cont("%s.\n", fr_ex_mce_desc[xec]);
+	else if (xec < 0xd)
+		pr_cont("%s parity error.\n", fr_ex_mce_desc[xec]);
+	else
+		goto wrong_fr_mce;
+
+	return;
 
 wrong_fr_mce:
 	pr_emerg(HW_ERR "Corrupted FR MCE info?\n");
 }
 
+static void amd_decode_fp_mce(struct mce *m)
+{
+	u8 xec = XEC(m->status, xec_mask);
+
+	pr_emerg(HW_ERR "Floating Point Unit Error: ");
+
+	switch (xec) {
+	case 0x1:
+		pr_cont("Free List");
+		break;
+
+	case 0x2:
+		pr_cont("Physical Register File");
+		break;
+
+	case 0x3:
+		pr_cont("Retire Queue");
+		break;
+
+	case 0x4:
+		pr_cont("Scheduler table");
+		break;
+
+	case 0x5:
+		pr_cont("Status Register File");
+		break;
+
+	default:
+		goto wrong_fp_mce;
+		break;
+	}
+
+	pr_cont(" parity error.\n");
+
+	return;
+
+wrong_fp_mce:
+	pr_emerg(HW_ERR "Corrupted FP MCE info?\n");
+}
+
 static inline void amd_decode_err_code(u16 ec)
 {
-	if (TLB_ERROR(ec)) {
-		pr_emerg(HW_ERR "Transaction: %s, Cache Level: %s\n",
-			 TT_MSG(ec), LL_MSG(ec));
-	} else if (MEM_ERROR(ec)) {
-		pr_emerg(HW_ERR "Transaction: %s, Type: %s, Cache Level: %s\n",
-			 RRRR_MSG(ec), TT_MSG(ec), LL_MSG(ec));
-	} else if (BUS_ERROR(ec)) {
-		pr_emerg(HW_ERR "Transaction: %s (%s), %s, Cache Level: %s, "
-			 "Participating Processor: %s\n",
-			  RRRR_MSG(ec), II_MSG(ec), TO_MSG(ec), LL_MSG(ec),
-			  PP_MSG(ec));
-	} else
-		pr_emerg(HW_ERR "Huh? Unknown MCE error 0x%x\n", ec);
+
+	pr_emerg(HW_ERR "cache level: %s", LL_MSG(ec));
+
+	if (BUS_ERROR(ec))
+		pr_cont(", mem/io: %s", II_MSG(ec));
+	else
+		pr_cont(", tx: %s", TT_MSG(ec));
+
+	if (MEM_ERROR(ec) || BUS_ERROR(ec)) {
+		pr_cont(", mem-tx: %s", R4_MSG(ec));
+
+		if (BUS_ERROR(ec))
+			pr_cont(", part-proc: %s (%s)", PP_MSG(ec), TO_MSG(ec));
+	}
+
+	pr_cont("\n");
 }
 
 /*
@@ -546,25 +763,32 @@ static bool amd_filter_mce(struct mce *m)
 int amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data)
 {
 	struct mce *m = (struct mce *)data;
+	struct cpuinfo_x86 *c = &boot_cpu_data;
 	int node, ecc;
 
 	if (amd_filter_mce(m))
 		return NOTIFY_STOP;
 
-	pr_emerg(HW_ERR "MC%d_STATUS: ", m->bank);
+	pr_emerg(HW_ERR "MC%d_STATUS[%s|%s|%s|%s|%s",
+		m->bank,
+		((m->status & MCI_STATUS_OVER)	? "Over"  : "-"),
+		((m->status & MCI_STATUS_UC)	? "UE"	  : "CE"),
+		((m->status & MCI_STATUS_MISCV)	? "MiscV" : "-"),
+		((m->status & MCI_STATUS_PCC)	? "PCC"	  : "-"),
+		((m->status & MCI_STATUS_ADDRV)	? "AddrV" : "-"));
 
-	pr_cont("%sorrected error, other errors lost: %s, "
-		 "CPU context corrupt: %s",
-		 ((m->status & MCI_STATUS_UC) ? "Unc"  : "C"),
-		 ((m->status & MCI_STATUS_OVER) ? "yes"  : "no"),
-		 ((m->status & MCI_STATUS_PCC) ? "yes" : "no"));
+	if (c->x86 == 0x15)
+		pr_cont("|%s|%s",
+			((m->status & BIT_64(44)) ? "Deferred" : "-"),
+			((m->status & BIT_64(43)) ? "Poison"   : "-"));
 
 	/* do the two bits[14:13] together */
 	ecc = (m->status >> 45) & 0x3;
 	if (ecc)
-		pr_cont(", %sECC Error", ((ecc == 2) ? "C" : "U"));
+		pr_cont("|%sECC", ((ecc == 2) ? "C" : "U"));
+
+	pr_cont("]: 0x%016llx\n", m->status);
 
-	pr_cont("\n");
 
 	switch (m->bank) {
 	case 0:
@@ -576,7 +800,10 @@ int amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data)
 		break;
 
 	case 2:
-		amd_decode_bu_mce(m);
+		if (c->x86 == 0x15)
+			amd_decode_cu_mce(m);
+		else
+			amd_decode_bu_mce(m);
 		break;
 
 	case 3:
@@ -592,6 +819,10 @@ int amd_decode_mce(struct notifier_block *nb, unsigned long val, void *data)
 		amd_decode_fr_mce(m);
 		break;
 
+	case 6:
+		amd_decode_fp_mce(m);
+		break;
+
 	default:
 		break;
 	}
@@ -608,18 +839,21 @@ static struct notifier_block amd_mce_dec_nb = {
 
 static int __init mce_amd_init(void)
 {
-	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	if (c->x86_vendor != X86_VENDOR_AMD)
 		return 0;
 
-	if ((boot_cpu_data.x86 < 0xf || boot_cpu_data.x86 > 0x12) &&
-	    (boot_cpu_data.x86 != 0x14 || boot_cpu_data.x86_model > 0xf))
+	if ((c->x86 < 0xf || c->x86 > 0x12) &&
+	    (c->x86 != 0x14 || c->x86_model > 0xf) &&
+	    (c->x86 != 0x15 || c->x86_model > 0xf))
 		return 0;
 
 	fam_ops = kzalloc(sizeof(struct amd_decoder_ops), GFP_KERNEL);
 	if (!fam_ops)
 		return -ENOMEM;
 
-	switch (boot_cpu_data.x86) {
+	switch (c->x86) {
 	case 0xf:
 		fam_ops->dc_mce = k8_dc_mce;
 		fam_ops->ic_mce = k8_ic_mce;
@@ -651,9 +885,15 @@ static int __init mce_amd_init(void)
 		fam_ops->nb_mce = nb_noop_mce;
 		break;
 
+	case 0x15:
+		xec_mask = 0x1f;
+		fam_ops->dc_mce = f15h_dc_mce;
+		fam_ops->ic_mce = f15h_ic_mce;
+		fam_ops->nb_mce = f10h_nb_mce;
+		break;
+
 	default:
-		printk(KERN_WARNING "Huh? What family is that: %d?!\n",
-				    boot_cpu_data.x86);
+		printk(KERN_WARNING "Huh? What family is that: %d?!\n", c->x86);
 		kfree(fam_ops);
 		return -EINVAL;
 	}
diff --git a/drivers/edac/mce_amd.h b/drivers/edac/mce_amd.h
index 35f6e0e3b29..45dda47173f 100644
--- a/drivers/edac/mce_amd.h
+++ b/drivers/edac/mce_amd.h
@@ -7,8 +7,8 @@
 
 #define BIT_64(n)			(U64_C(1) << (n))
 
-#define ERROR_CODE(x)			((x) & 0xffff)
-#define EXT_ERROR_CODE(x)		(((x) >> 16) & 0x1f)
+#define EC(x)				((x) & 0xffff)
+#define XEC(x, mask)			(((x) >> 16) & mask)
 
 #define LOW_SYNDROME(x)			(((x) >> 15) & 0xff)
 #define HIGH_SYNDROME(x)		(((x) >> 24) & 0xff)
@@ -21,15 +21,15 @@
 #define TT_MSG(x)			tt_msgs[TT(x)]
 #define II(x)				(((x) >> 2) & 0x3)
 #define II_MSG(x)			ii_msgs[II(x)]
-#define LL(x)				(((x) >> 0) & 0x3)
+#define LL(x)				((x) & 0x3)
 #define LL_MSG(x)			ll_msgs[LL(x)]
 #define TO(x)				(((x) >> 8) & 0x1)
 #define TO_MSG(x)			to_msgs[TO(x)]
 #define PP(x)				(((x) >> 9) & 0x3)
 #define PP_MSG(x)			pp_msgs[PP(x)]
 
-#define RRRR(x)				(((x) >> 4) & 0xf)
-#define RRRR_MSG(x)			((RRRR(x) < 9) ?  rrrr_msgs[RRRR(x)] : "Wrong R4!")
+#define R4(x)				(((x) >> 4) & 0xf)
+#define R4_MSG(x)			((R4(x) < 9) ?  rrrr_msgs[R4(x)] : "Wrong R4!")
 
 #define K8_NBSH				0x4C
 
@@ -100,8 +100,8 @@ struct err_regs {
  * per-family decoder ops
  */
 struct amd_decoder_ops {
-	bool (*dc_mce)(u16);
-	bool (*ic_mce)(u16);
+	bool (*dc_mce)(u16, u8);
+	bool (*ic_mce)(u16, u8);
 	bool (*nb_mce)(u16, u8);
 };
 
diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
index 8d0688f36d4..733a7e7a8d6 100644
--- a/drivers/edac/mce_amd_inj.c
+++ b/drivers/edac/mce_amd_inj.c
@@ -88,10 +88,11 @@ static ssize_t edac_inject_bank_store(struct kobject *kobj,
 		return -EINVAL;
 	}
 
-	if (value > 5) {
-		printk(KERN_ERR "Non-existant MCE bank: %lu\n", value);
-		return -EINVAL;
-	}
+	if (value > 5)
+		if (boot_cpu_data.x86 != 0x15 || value > 6) {
+			printk(KERN_ERR "Non-existant MCE bank: %lu\n", value);
+			return -EINVAL;
+		}
 
 	i_mce.bank = value;
 
@@ -139,7 +140,7 @@ static int __init edac_init_mce_inject(void)
 	return 0;
 
 err_sysfs_create:
-	while (i-- >= 0)
+	while (--i >= 0)
 		sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr);
 
 	kobject_del(mce_kobj);
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 18fdd9703b4..1a467a91fb0 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/bug.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firewire.h>
 #include <linux/firewire-constants.h>
@@ -26,8 +27,14 @@
 #include <asm/unaligned.h>
 #include <net/arp.h>
 
-#define FWNET_MAX_FRAGMENTS	25	/* arbitrary limit */
-#define FWNET_ISO_PAGE_COUNT	(PAGE_SIZE < 16 * 1024 ? 4 : 2)
+/* rx limits */
+#define FWNET_MAX_FRAGMENTS		30 /* arbitrary, > TX queue depth */
+#define FWNET_ISO_PAGE_COUNT		(PAGE_SIZE < 16*1024 ? 4 : 2)
+
+/* tx limits */
+#define FWNET_MAX_QUEUED_DATAGRAMS	20 /* < 64 = number of tlabels */
+#define FWNET_MIN_QUEUED_DATAGRAMS	10 /* should keep AT DMA busy enough */
+#define FWNET_TX_QUEUE_LEN		FWNET_MAX_QUEUED_DATAGRAMS /* ? */
 
 #define IEEE1394_BROADCAST_CHANNEL	31
 #define IEEE1394_ALL_NODES		(0xffc0 | 0x003f)
@@ -169,15 +176,8 @@ struct fwnet_device {
 	struct fw_address_handler handler;
 	u64 local_fifo;
 
-	/* List of packets to be sent */
-	struct list_head packet_list;
-	/*
-	 * List of packets that were broadcasted.  When we get an ISO interrupt
-	 * one of them has been sent
-	 */
-	struct list_head broadcasted_list;
-	/* List of packets that have been sent but not yet acked */
-	struct list_head sent_list;
+	/* Number of tx datagrams that have been queued but not yet acked */
+	int queued_datagrams;
 
 	struct list_head peer_list;
 	struct fw_card *card;
@@ -195,7 +195,7 @@ struct fwnet_peer {
 	unsigned pdg_size;        /* pd_list size */
 
 	u16 datagram_label;       /* outgoing datagram label */
-	unsigned max_payload;     /* includes RFC2374_FRAG_HDR_SIZE overhead */
+	u16 max_payload;          /* includes RFC2374_FRAG_HDR_SIZE overhead */
 	int node_id;
 	int generation;
 	unsigned speed;
@@ -203,22 +203,18 @@ struct fwnet_peer {
 
 /* This is our task struct. It's used for the packet complete callback.  */
 struct fwnet_packet_task {
-	/*
-	 * ptask can actually be on dev->packet_list, dev->broadcasted_list,
-	 * or dev->sent_list depending on its current state.
-	 */
-	struct list_head pt_link;
 	struct fw_transaction transaction;
 	struct rfc2734_header hdr;
 	struct sk_buff *skb;
 	struct fwnet_device *dev;
 
 	int outstanding_pkts;
-	unsigned max_payload;
 	u64 fifo_addr;
 	u16 dest_node;
+	u16 max_payload;
 	u8 generation;
 	u8 speed;
+	u8 enqueued;
 };
 
 /*
@@ -650,8 +646,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 		net->stats.rx_packets++;
 		net->stats.rx_bytes += skb->len;
 	}
-	if (netif_queue_stopped(net))
-		netif_wake_queue(net);
 
 	return 0;
 
@@ -660,8 +654,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 	net->stats.rx_dropped++;
 
 	dev_kfree_skb_any(skb);
-	if (netif_queue_stopped(net))
-		netif_wake_queue(net);
 
 	return -ENOENT;
 }
@@ -793,15 +785,10 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len,
 	 * Datagram is not complete, we're done for the
 	 * moment.
 	 */
-	spin_unlock_irqrestore(&dev->lock, flags);
-
-	return 0;
+	retval = 0;
  fail:
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	if (netif_queue_stopped(net))
-		netif_wake_queue(net);
-
 	return retval;
 }
 
@@ -901,11 +888,19 @@ static void fwnet_free_ptask(struct fwnet_packet_task *ptask)
 	kmem_cache_free(fwnet_packet_task_cache, ptask);
 }
 
+/* Caller must hold dev->lock. */
+static void dec_queued_datagrams(struct fwnet_device *dev)
+{
+	if (--dev->queued_datagrams == FWNET_MIN_QUEUED_DATAGRAMS)
+		netif_wake_queue(dev->netdev);
+}
+
 static int fwnet_send_packet(struct fwnet_packet_task *ptask);
 
 static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 {
 	struct fwnet_device *dev = ptask->dev;
+	struct sk_buff *skb = ptask->skb;
 	unsigned long flags;
 	bool free;
 
@@ -914,10 +909,14 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 	ptask->outstanding_pkts--;
 
 	/* Check whether we or the networking TX soft-IRQ is last user. */
-	free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
+	free = (ptask->outstanding_pkts == 0 && ptask->enqueued);
+	if (free)
+		dec_queued_datagrams(dev);
 
-	if (ptask->outstanding_pkts == 0)
-		list_del(&ptask->pt_link);
+	if (ptask->outstanding_pkts == 0) {
+		dev->netdev->stats.tx_packets++;
+		dev->netdev->stats.tx_bytes += skb->len;
+	}
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -926,7 +925,6 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 		u16 fg_off;
 		u16 datagram_label;
 		u16 lf;
-		struct sk_buff *skb;
 
 		/* Update the ptask to point to the next fragment and send it */
 		lf = fwnet_get_hdr_lf(&ptask->hdr);
@@ -953,7 +951,7 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 			datagram_label = fwnet_get_hdr_dgl(&ptask->hdr);
 			break;
 		}
-		skb = ptask->skb;
+
 		skb_pull(skb, ptask->max_payload);
 		if (ptask->outstanding_pkts > 1) {
 			fwnet_make_sf_hdr(&ptask->hdr, RFC2374_HDR_INTFRAG,
@@ -970,6 +968,31 @@ static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
 		fwnet_free_ptask(ptask);
 }
 
+static void fwnet_transmit_packet_failed(struct fwnet_packet_task *ptask)
+{
+	struct fwnet_device *dev = ptask->dev;
+	unsigned long flags;
+	bool free;
+
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* One fragment failed; don't try to send remaining fragments. */
+	ptask->outstanding_pkts = 0;
+
+	/* Check whether we or the networking TX soft-IRQ is last user. */
+	free = ptask->enqueued;
+	if (free)
+		dec_queued_datagrams(dev);
+
+	dev->netdev->stats.tx_dropped++;
+	dev->netdev->stats.tx_errors++;
+
+	spin_unlock_irqrestore(&dev->lock, flags);
+
+	if (free)
+		fwnet_free_ptask(ptask);
+}
+
 static void fwnet_write_complete(struct fw_card *card, int rcode,
 				 void *payload, size_t length, void *data)
 {
@@ -977,11 +1000,12 @@ static void fwnet_write_complete(struct fw_card *card, int rcode,
 
 	ptask = data;
 
-	if (rcode == RCODE_COMPLETE)
+	if (rcode == RCODE_COMPLETE) {
 		fwnet_transmit_packet_done(ptask);
-	else
+	} else {
 		fw_error("fwnet_write_complete: failed: %x\n", rcode);
-		/* ??? error recovery */
+		fwnet_transmit_packet_failed(ptask);
+	}
 }
 
 static int fwnet_send_packet(struct fwnet_packet_task *ptask)
@@ -1039,9 +1063,11 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask)
 		spin_lock_irqsave(&dev->lock, flags);
 
 		/* If the AT tasklet already ran, we may be last user. */
-		free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+		free = (ptask->outstanding_pkts == 0 && !ptask->enqueued);
 		if (!free)
-			list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+			ptask->enqueued = true;
+		else
+			dec_queued_datagrams(dev);
 
 		spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -1056,9 +1082,11 @@ static int fwnet_send_packet(struct fwnet_packet_task *ptask)
 	spin_lock_irqsave(&dev->lock, flags);
 
 	/* If the AT tasklet already ran, we may be last user. */
-	free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+	free = (ptask->outstanding_pkts == 0 && !ptask->enqueued);
 	if (!free)
-		list_add_tail(&ptask->pt_link, &dev->sent_list);
+		ptask->enqueued = true;
+	else
+		dec_queued_datagrams(dev);
 
 	spin_unlock_irqrestore(&dev->lock, flags);
 
@@ -1224,6 +1252,15 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 	struct fwnet_peer *peer;
 	unsigned long flags;
 
+	spin_lock_irqsave(&dev->lock, flags);
+
+	/* Can this happen? */
+	if (netif_queue_stopped(dev->netdev)) {
+		spin_unlock_irqrestore(&dev->lock, flags);
+
+		return NETDEV_TX_BUSY;
+	}
+
 	ptask = kmem_cache_alloc(fwnet_packet_task_cache, GFP_ATOMIC);
 	if (ptask == NULL)
 		goto fail;
@@ -1242,9 +1279,6 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 	proto = hdr_buf.h_proto;
 	dg_size = skb->len;
 
-	/* serialize access to peer, including peer->datagram_label */
-	spin_lock_irqsave(&dev->lock, flags);
-
 	/*
 	 * Set the transmission type for the packet.  ARP packets and IP
 	 * broadcast packets are sent via GASP.
@@ -1266,7 +1300,7 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 
 		peer = fwnet_peer_find_by_guid(dev, be64_to_cpu(guid));
 		if (!peer || peer->fifo == FWNET_NO_FIFO_ADDR)
-			goto fail_unlock;
+			goto fail;
 
 		generation         = peer->generation;
 		dest_node          = peer->node_id;
@@ -1320,18 +1354,21 @@ static netdev_tx_t fwnet_tx(struct sk_buff *skb, struct net_device *net)
 		max_payload += RFC2374_FRAG_HDR_SIZE;
 	}
 
+	if (++dev->queued_datagrams == FWNET_MAX_QUEUED_DATAGRAMS)
+		netif_stop_queue(dev->netdev);
+
 	spin_unlock_irqrestore(&dev->lock, flags);
 
 	ptask->max_payload = max_payload;
-	INIT_LIST_HEAD(&ptask->pt_link);
+	ptask->enqueued    = 0;
 
 	fwnet_send_packet(ptask);
 
 	return NETDEV_TX_OK;
 
- fail_unlock:
-	spin_unlock_irqrestore(&dev->lock, flags);
  fail:
+	spin_unlock_irqrestore(&dev->lock, flags);
+
 	if (ptask)
 		kmem_cache_free(fwnet_packet_task_cache, ptask);
 
@@ -1377,7 +1414,7 @@ static void fwnet_init_dev(struct net_device *net)
 	net->addr_len		= FWNET_ALEN;
 	net->hard_header_len	= FWNET_HLEN;
 	net->type		= ARPHRD_IEEE1394;
-	net->tx_queue_len	= 10;
+	net->tx_queue_len	= FWNET_TX_QUEUE_LEN;
 }
 
 /* caller must hold fwnet_device_mutex */
@@ -1457,14 +1494,9 @@ static int fwnet_probe(struct device *_dev)
 	dev->broadcast_rcv_context = NULL;
 	dev->broadcast_xmt_max_payload = 0;
 	dev->broadcast_xmt_datagramlabel = 0;
-
 	dev->local_fifo = FWNET_NO_FIFO_ADDR;
-
-	INIT_LIST_HEAD(&dev->packet_list);
-	INIT_LIST_HEAD(&dev->broadcasted_list);
-	INIT_LIST_HEAD(&dev->sent_list);
+	dev->queued_datagrams = 0;
 	INIT_LIST_HEAD(&dev->peer_list);
-
 	dev->card = card;
 	dev->netdev = net;
 
@@ -1522,7 +1554,7 @@ static int fwnet_remove(struct device *_dev)
 	struct fwnet_peer *peer = dev_get_drvdata(_dev);
 	struct fwnet_device *dev = peer->dev;
 	struct net_device *net;
-	struct fwnet_packet_task *ptask, *pt_next;
+	int i;
 
 	mutex_lock(&fwnet_device_mutex);
 
@@ -1540,21 +1572,9 @@ static int fwnet_remove(struct device *_dev)
 					      dev->card);
 			fw_iso_context_destroy(dev->broadcast_rcv_context);
 		}
-		list_for_each_entry_safe(ptask, pt_next,
-					 &dev->packet_list, pt_link) {
-			dev_kfree_skb_any(ptask->skb);
-			kmem_cache_free(fwnet_packet_task_cache, ptask);
-		}
-		list_for_each_entry_safe(ptask, pt_next,
-					 &dev->broadcasted_list, pt_link) {
-			dev_kfree_skb_any(ptask->skb);
-			kmem_cache_free(fwnet_packet_task_cache, ptask);
-		}
-		list_for_each_entry_safe(ptask, pt_next,
-					 &dev->sent_list, pt_link) {
-			dev_kfree_skb_any(ptask->skb);
-			kmem_cache_free(fwnet_packet_task_cache, ptask);
-		}
+		for (i = 0; dev->queued_datagrams && i < 5; i++)
+			ssleep(1);
+		WARN_ON(dev->queued_datagrams);
 		list_del(&dev->dev_link);
 
 		free_netdev(net);
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 84eb607d6c0..e3c8b60bd86 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -242,6 +242,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card)
 
 static char ohci_driver_name[] = KBUILD_MODNAME;
 
+#define PCI_DEVICE_ID_AGERE_FW643	0x5901
 #define PCI_DEVICE_ID_JMICRON_JMB38X_FW	0x2380
 #define PCI_DEVICE_ID_TI_TSB12LV22	0x8009
 
@@ -253,18 +254,34 @@ static char ohci_driver_name[] = KBUILD_MODNAME;
 
 /* In case of multiple matches in ohci_quirks[], only the first one is used. */
 static const struct {
-	unsigned short vendor, device, flags;
+	unsigned short vendor, device, revision, flags;
 } ohci_quirks[] = {
-	{PCI_VENDOR_ID_TI,	PCI_DEVICE_ID_TI_TSB12LV22, QUIRK_CYCLE_TIMER |
-							    QUIRK_RESET_PACKET |
-							    QUIRK_NO_1394A},
-	{PCI_VENDOR_ID_TI,	PCI_ANY_ID,	QUIRK_RESET_PACKET},
-	{PCI_VENDOR_ID_AL,	PCI_ANY_ID,	QUIRK_CYCLE_TIMER},
-	{PCI_VENDOR_ID_JMICRON,	PCI_DEVICE_ID_JMICRON_JMB38X_FW, QUIRK_NO_MSI},
-	{PCI_VENDOR_ID_NEC,	PCI_ANY_ID,	QUIRK_CYCLE_TIMER},
-	{PCI_VENDOR_ID_VIA,	PCI_ANY_ID,	QUIRK_CYCLE_TIMER},
-	{PCI_VENDOR_ID_RICOH,	PCI_ANY_ID,	QUIRK_CYCLE_TIMER},
-	{PCI_VENDOR_ID_APPLE,	PCI_DEVICE_ID_APPLE_UNI_N_FW, QUIRK_BE_HEADERS},
+	{PCI_VENDOR_ID_AL, PCI_ANY_ID, PCI_ANY_ID,
+		QUIRK_CYCLE_TIMER},
+
+	{PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, PCI_ANY_ID,
+		QUIRK_BE_HEADERS},
+
+	{PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6,
+		QUIRK_NO_MSI},
+
+	{PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID,
+		QUIRK_NO_MSI},
+
+	{PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID,
+		QUIRK_CYCLE_TIMER},
+
+	{PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
+		QUIRK_CYCLE_TIMER},
+
+	{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID,
+		QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A},
+
+	{PCI_VENDOR_ID_TI, PCI_ANY_ID, PCI_ANY_ID,
+		QUIRK_RESET_PACKET},
+
+	{PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_ANY_ID,
+		QUIRK_CYCLE_TIMER | QUIRK_NO_MSI},
 };
 
 /* This overrides anything that was found in ohci_quirks[]. */
@@ -2927,9 +2944,11 @@ static int __devinit pci_probe(struct pci_dev *dev,
 	}
 
 	for (i = 0; i < ARRAY_SIZE(ohci_quirks); i++)
-		if (ohci_quirks[i].vendor == dev->vendor &&
-		    (ohci_quirks[i].device == dev->device ||
-		     ohci_quirks[i].device == (unsigned short)PCI_ANY_ID)) {
+		if ((ohci_quirks[i].vendor == dev->vendor) &&
+		    (ohci_quirks[i].device == (unsigned short)PCI_ANY_ID ||
+		     ohci_quirks[i].device == dev->device) &&
+		    (ohci_quirks[i].revision == (unsigned short)PCI_ANY_ID ||
+		     ohci_quirks[i].revision >= dev->revision)) {
 			ohci->quirks = ohci_quirks[i].flags;
 			break;
 		}
diff --git a/drivers/firewire/sbp2.c b/drivers/firewire/sbp2.c
index bfae4b30979..afa576a75a8 100644
--- a/drivers/firewire/sbp2.c
+++ b/drivers/firewire/sbp2.c
@@ -1468,7 +1468,7 @@ static int sbp2_map_scatterlist(struct sbp2_command_orb *orb,
 
 /* SCSI stack integration */
 
-static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
+static int sbp2_scsi_queuecommand_lck(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 {
 	struct sbp2_logical_unit *lu = cmd->device->hostdata;
 	struct fw_device *device = target_device(lu->tgt);
@@ -1534,6 +1534,8 @@ static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
 	return retval;
 }
 
+static DEF_SCSI_QCMD(sbp2_scsi_queuecommand)
+
 static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
 {
 	struct sbp2_logical_unit *lu = sdev->hostdata;
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 3143ac795eb..082495bb08a 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -230,11 +230,11 @@ config GPIO_STMPE
 	  This enables support for the GPIOs found on the STMPE I/O
 	  Expanders.
 
-config GPIO_TC35892
-	bool "TC35892 GPIOs"
-	depends on MFD_TC35892
+config GPIO_TC3589X
+	bool "TC3589X GPIOs"
+	depends on MFD_TC3589X
 	help
-	  This enables support for the GPIOs found on the TC35892
+	  This enables support for the GPIOs found on the TC3589X
 	  I/O Expander.
 
 config GPIO_TWL4030
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index bdf3ddec065..39bfd7a3765 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -24,7 +24,7 @@ obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= pch_gpio.o
 obj-$(CONFIG_GPIO_PL061)	+= pl061.o
 obj-$(CONFIG_GPIO_STMPE)	+= stmpe-gpio.o
-obj-$(CONFIG_GPIO_TC35892)	+= tc35892-gpio.o
+obj-$(CONFIG_GPIO_TC3589X)	+= tc3589x-gpio.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= timbgpio.o
 obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
 obj-$(CONFIG_GPIO_UCB1400)	+= ucb1400_gpio.o
diff --git a/drivers/gpio/cs5535-gpio.c b/drivers/gpio/cs5535-gpio.c
index e23c06893d1..d3e55a0ae92 100644
--- a/drivers/gpio/cs5535-gpio.c
+++ b/drivers/gpio/cs5535-gpio.c
@@ -56,6 +56,29 @@ static struct cs5535_gpio_chip {
  * registers, see include/linux/cs5535.h.
  */
 
+static void errata_outl(struct cs5535_gpio_chip *chip, u32 val,
+		unsigned int reg)
+{
+	unsigned long addr = chip->base + 0x80 + reg;
+
+	/*
+	 * According to the CS5536 errata (#36), after suspend
+	 * a write to the high bank GPIO register will clear all
+	 * non-selected bits; the recommended workaround is a
+	 * read-modify-write operation.
+	 *
+	 * Don't apply this errata to the edge status GPIOs, as writing
+	 * to their lower bits will clear them.
+	 */
+	if (reg != GPIO_POSITIVE_EDGE_STS && reg != GPIO_NEGATIVE_EDGE_STS) {
+		if (val & 0xffff)
+			val |= (inl(addr) & 0xffff); /* ignore the high bits */
+		else
+			val |= (inl(addr) ^ (val >> 16));
+	}
+	outl(val, addr);
+}
+
 static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
 		unsigned int reg)
 {
@@ -64,7 +87,7 @@ static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
 		outl(1 << offset, chip->base + reg);
 	else
 		/* high bank register */
-		outl(1 << (offset - 16), chip->base + 0x80 + reg);
+		errata_outl(chip, 1 << (offset - 16), reg);
 }
 
 void cs5535_gpio_set(unsigned offset, unsigned int reg)
@@ -86,7 +109,7 @@ static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
 		outl(1 << (offset + 16), chip->base + reg);
 	else
 		/* high bank register */
-		outl(1 << offset, chip->base + 0x80 + reg);
+		errata_outl(chip, 1 << offset, reg);
 }
 
 void cs5535_gpio_clear(unsigned offset, unsigned int reg)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 21da9c19a0c..649550e2cae 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1281,6 +1281,9 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
 		err = gpio_direction_output(gpio,
 				(flags & GPIOF_INIT_HIGH) ? 1 : 0);
 
+	if (err)
+		gpio_free(gpio);
+
 	return err;
 }
 EXPORT_SYMBOL_GPL(gpio_request_one);
diff --git a/drivers/gpio/rdc321x-gpio.c b/drivers/gpio/rdc321x-gpio.c
index 2762698e020..897e0577e65 100644
--- a/drivers/gpio/rdc321x-gpio.c
+++ b/drivers/gpio/rdc321x-gpio.c
@@ -135,7 +135,7 @@ static int __devinit rdc321x_gpio_probe(struct platform_device *pdev)
 	struct rdc321x_gpio *rdc321x_gpio_dev;
 	struct rdc321x_gpio_pdata *pdata;
 
-	pdata = pdev->dev.platform_data;
+	pdata = platform_get_drvdata(pdev);
 	if (!pdata) {
 		dev_err(&pdev->dev, "no platform data supplied\n");
 		return -ENODEV;
diff --git a/drivers/gpio/tc35892-gpio.c b/drivers/gpio/tc35892-gpio.c
deleted file mode 100644
index 7e10c935a04..00000000000
--- a/drivers/gpio/tc35892-gpio.c
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License, version 2
- * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/tc35892.h>
-
-/*
- * These registers are modified under the irq bus lock and cached to avoid
- * unnecessary writes in bus_sync_unlock.
- */
-enum { REG_IBE, REG_IEV, REG_IS, REG_IE };
-
-#define CACHE_NR_REGS	4
-#define CACHE_NR_BANKS	3
-
-struct tc35892_gpio {
-	struct gpio_chip chip;
-	struct tc35892 *tc35892;
-	struct device *dev;
-	struct mutex irq_lock;
-
-	int irq_base;
-
-	/* Caches of interrupt control registers for bus_lock */
-	u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
-	u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
-};
-
-static inline struct tc35892_gpio *to_tc35892_gpio(struct gpio_chip *chip)
-{
-	return container_of(chip, struct tc35892_gpio, chip);
-}
-
-static int tc35892_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
-	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
-	u8 reg = TC35892_GPIODATA0 + (offset / 8) * 2;
-	u8 mask = 1 << (offset % 8);
-	int ret;
-
-	ret = tc35892_reg_read(tc35892, reg);
-	if (ret < 0)
-		return ret;
-
-	return ret & mask;
-}
-
-static void tc35892_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
-{
-	struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
-	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
-	u8 reg = TC35892_GPIODATA0 + (offset / 8) * 2;
-	unsigned pos = offset % 8;
-	u8 data[] = {!!val << pos, 1 << pos};
-
-	tc35892_block_write(tc35892, reg, ARRAY_SIZE(data), data);
-}
-
-static int tc35892_gpio_direction_output(struct gpio_chip *chip,
-					 unsigned offset, int val)
-{
-	struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
-	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
-	u8 reg = TC35892_GPIODIR0 + offset / 8;
-	unsigned pos = offset % 8;
-
-	tc35892_gpio_set(chip, offset, val);
-
-	return tc35892_set_bits(tc35892, reg, 1 << pos, 1 << pos);
-}
-
-static int tc35892_gpio_direction_input(struct gpio_chip *chip,
-					unsigned offset)
-{
-	struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
-	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
-	u8 reg = TC35892_GPIODIR0 + offset / 8;
-	unsigned pos = offset % 8;
-
-	return tc35892_set_bits(tc35892, reg, 1 << pos, 0);
-}
-
-static int tc35892_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct tc35892_gpio *tc35892_gpio = to_tc35892_gpio(chip);
-
-	return tc35892_gpio->irq_base + offset;
-}
-
-static struct gpio_chip template_chip = {
-	.label			= "tc35892",
-	.owner			= THIS_MODULE,
-	.direction_input	= tc35892_gpio_direction_input,
-	.get			= tc35892_gpio_get,
-	.direction_output	= tc35892_gpio_direction_output,
-	.set			= tc35892_gpio_set,
-	.to_irq			= tc35892_gpio_to_irq,
-	.can_sleep		= 1,
-};
-
-static int tc35892_gpio_irq_set_type(unsigned int irq, unsigned int type)
-{
-	struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
-	int offset = irq - tc35892_gpio->irq_base;
-	int regoffset = offset / 8;
-	int mask = 1 << (offset % 8);
-
-	if (type == IRQ_TYPE_EDGE_BOTH) {
-		tc35892_gpio->regs[REG_IBE][regoffset] |= mask;
-		return 0;
-	}
-
-	tc35892_gpio->regs[REG_IBE][regoffset] &= ~mask;
-
-	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
-		tc35892_gpio->regs[REG_IS][regoffset] |= mask;
-	else
-		tc35892_gpio->regs[REG_IS][regoffset] &= ~mask;
-
-	if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH)
-		tc35892_gpio->regs[REG_IEV][regoffset] |= mask;
-	else
-		tc35892_gpio->regs[REG_IEV][regoffset] &= ~mask;
-
-	return 0;
-}
-
-static void tc35892_gpio_irq_lock(unsigned int irq)
-{
-	struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
-
-	mutex_lock(&tc35892_gpio->irq_lock);
-}
-
-static void tc35892_gpio_irq_sync_unlock(unsigned int irq)
-{
-	struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
-	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
-	static const u8 regmap[] = {
-		[REG_IBE]	= TC35892_GPIOIBE0,
-		[REG_IEV]	= TC35892_GPIOIEV0,
-		[REG_IS]	= TC35892_GPIOIS0,
-		[REG_IE]	= TC35892_GPIOIE0,
-	};
-	int i, j;
-
-	for (i = 0; i < CACHE_NR_REGS; i++) {
-		for (j = 0; j < CACHE_NR_BANKS; j++) {
-			u8 old = tc35892_gpio->oldregs[i][j];
-			u8 new = tc35892_gpio->regs[i][j];
-
-			if (new == old)
-				continue;
-
-			tc35892_gpio->oldregs[i][j] = new;
-			tc35892_reg_write(tc35892, regmap[i] + j * 8, new);
-		}
-	}
-
-	mutex_unlock(&tc35892_gpio->irq_lock);
-}
-
-static void tc35892_gpio_irq_mask(unsigned int irq)
-{
-	struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
-	int offset = irq - tc35892_gpio->irq_base;
-	int regoffset = offset / 8;
-	int mask = 1 << (offset % 8);
-
-	tc35892_gpio->regs[REG_IE][regoffset] &= ~mask;
-}
-
-static void tc35892_gpio_irq_unmask(unsigned int irq)
-{
-	struct tc35892_gpio *tc35892_gpio = get_irq_chip_data(irq);
-	int offset = irq - tc35892_gpio->irq_base;
-	int regoffset = offset / 8;
-	int mask = 1 << (offset % 8);
-
-	tc35892_gpio->regs[REG_IE][regoffset] |= mask;
-}
-
-static struct irq_chip tc35892_gpio_irq_chip = {
-	.name			= "tc35892-gpio",
-	.bus_lock		= tc35892_gpio_irq_lock,
-	.bus_sync_unlock	= tc35892_gpio_irq_sync_unlock,
-	.mask			= tc35892_gpio_irq_mask,
-	.unmask			= tc35892_gpio_irq_unmask,
-	.set_type		= tc35892_gpio_irq_set_type,
-};
-
-static irqreturn_t tc35892_gpio_irq(int irq, void *dev)
-{
-	struct tc35892_gpio *tc35892_gpio = dev;
-	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
-	u8 status[CACHE_NR_BANKS];
-	int ret;
-	int i;
-
-	ret = tc35892_block_read(tc35892, TC35892_GPIOMIS0,
-				 ARRAY_SIZE(status), status);
-	if (ret < 0)
-		return IRQ_NONE;
-
-	for (i = 0; i < ARRAY_SIZE(status); i++) {
-		unsigned int stat = status[i];
-		if (!stat)
-			continue;
-
-		while (stat) {
-			int bit = __ffs(stat);
-			int line = i * 8 + bit;
-
-			handle_nested_irq(tc35892_gpio->irq_base + line);
-			stat &= ~(1 << bit);
-		}
-
-		tc35892_reg_write(tc35892, TC35892_GPIOIC0 + i, status[i]);
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int tc35892_gpio_irq_init(struct tc35892_gpio *tc35892_gpio)
-{
-	int base = tc35892_gpio->irq_base;
-	int irq;
-
-	for (irq = base; irq < base + tc35892_gpio->chip.ngpio; irq++) {
-		set_irq_chip_data(irq, tc35892_gpio);
-		set_irq_chip_and_handler(irq, &tc35892_gpio_irq_chip,
-					 handle_simple_irq);
-		set_irq_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, IRQF_VALID);
-#else
-		set_irq_noprobe(irq);
-#endif
-	}
-
-	return 0;
-}
-
-static void tc35892_gpio_irq_remove(struct tc35892_gpio *tc35892_gpio)
-{
-	int base = tc35892_gpio->irq_base;
-	int irq;
-
-	for (irq = base; irq < base + tc35892_gpio->chip.ngpio; irq++) {
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, 0);
-#endif
-		set_irq_chip_and_handler(irq, NULL, NULL);
-		set_irq_chip_data(irq, NULL);
-	}
-}
-
-static int __devinit tc35892_gpio_probe(struct platform_device *pdev)
-{
-	struct tc35892 *tc35892 = dev_get_drvdata(pdev->dev.parent);
-	struct tc35892_gpio_platform_data *pdata;
-	struct tc35892_gpio *tc35892_gpio;
-	int ret;
-	int irq;
-
-	pdata = tc35892->pdata->gpio;
-	if (!pdata)
-		return -ENODEV;
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
-
-	tc35892_gpio = kzalloc(sizeof(struct tc35892_gpio), GFP_KERNEL);
-	if (!tc35892_gpio)
-		return -ENOMEM;
-
-	mutex_init(&tc35892_gpio->irq_lock);
-
-	tc35892_gpio->dev = &pdev->dev;
-	tc35892_gpio->tc35892 = tc35892;
-
-	tc35892_gpio->chip = template_chip;
-	tc35892_gpio->chip.ngpio = tc35892->num_gpio;
-	tc35892_gpio->chip.dev = &pdev->dev;
-	tc35892_gpio->chip.base = pdata->gpio_base;
-
-	tc35892_gpio->irq_base = tc35892->irq_base + TC35892_INT_GPIO(0);
-
-	/* Bring the GPIO module out of reset */
-	ret = tc35892_set_bits(tc35892, TC35892_RSTCTRL,
-			       TC35892_RSTCTRL_GPIRST, 0);
-	if (ret < 0)
-		goto out_free;
-
-	ret = tc35892_gpio_irq_init(tc35892_gpio);
-	if (ret)
-		goto out_free;
-
-	ret = request_threaded_irq(irq, NULL, tc35892_gpio_irq, IRQF_ONESHOT,
-				   "tc35892-gpio", tc35892_gpio);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
-		goto out_removeirq;
-	}
-
-	ret = gpiochip_add(&tc35892_gpio->chip);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
-		goto out_freeirq;
-	}
-
-	if (pdata->setup)
-		pdata->setup(tc35892, tc35892_gpio->chip.base);
-
-	platform_set_drvdata(pdev, tc35892_gpio);
-
-	return 0;
-
-out_freeirq:
-	free_irq(irq, tc35892_gpio);
-out_removeirq:
-	tc35892_gpio_irq_remove(tc35892_gpio);
-out_free:
-	kfree(tc35892_gpio);
-	return ret;
-}
-
-static int __devexit tc35892_gpio_remove(struct platform_device *pdev)
-{
-	struct tc35892_gpio *tc35892_gpio = platform_get_drvdata(pdev);
-	struct tc35892 *tc35892 = tc35892_gpio->tc35892;
-	struct tc35892_gpio_platform_data *pdata = tc35892->pdata->gpio;
-	int irq = platform_get_irq(pdev, 0);
-	int ret;
-
-	if (pdata->remove)
-		pdata->remove(tc35892, tc35892_gpio->chip.base);
-
-	ret = gpiochip_remove(&tc35892_gpio->chip);
-	if (ret < 0) {
-		dev_err(tc35892_gpio->dev,
-			"unable to remove gpiochip: %d\n", ret);
-		return ret;
-	}
-
-	free_irq(irq, tc35892_gpio);
-	tc35892_gpio_irq_remove(tc35892_gpio);
-
-	platform_set_drvdata(pdev, NULL);
-	kfree(tc35892_gpio);
-
-	return 0;
-}
-
-static struct platform_driver tc35892_gpio_driver = {
-	.driver.name	= "tc35892-gpio",
-	.driver.owner	= THIS_MODULE,
-	.probe		= tc35892_gpio_probe,
-	.remove		= __devexit_p(tc35892_gpio_remove),
-};
-
-static int __init tc35892_gpio_init(void)
-{
-	return platform_driver_register(&tc35892_gpio_driver);
-}
-subsys_initcall(tc35892_gpio_init);
-
-static void __exit tc35892_gpio_exit(void)
-{
-	platform_driver_unregister(&tc35892_gpio_driver);
-}
-module_exit(tc35892_gpio_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("TC35892 GPIO driver");
-MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/gpio/tc3589x-gpio.c b/drivers/gpio/tc3589x-gpio.c
new file mode 100644
index 00000000000..180d584454f
--- /dev/null
+++ b/drivers/gpio/tc3589x-gpio.c
@@ -0,0 +1,389 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/tc3589x.h>
+
+/*
+ * These registers are modified under the irq bus lock and cached to avoid
+ * unnecessary writes in bus_sync_unlock.
+ */
+enum { REG_IBE, REG_IEV, REG_IS, REG_IE };
+
+#define CACHE_NR_REGS	4
+#define CACHE_NR_BANKS	3
+
+struct tc3589x_gpio {
+	struct gpio_chip chip;
+	struct tc3589x *tc3589x;
+	struct device *dev;
+	struct mutex irq_lock;
+
+	int irq_base;
+
+	/* Caches of interrupt control registers for bus_lock */
+	u8 regs[CACHE_NR_REGS][CACHE_NR_BANKS];
+	u8 oldregs[CACHE_NR_REGS][CACHE_NR_BANKS];
+};
+
+static inline struct tc3589x_gpio *to_tc3589x_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct tc3589x_gpio, chip);
+}
+
+static int tc3589x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 reg = TC3589x_GPIODATA0 + (offset / 8) * 2;
+	u8 mask = 1 << (offset % 8);
+	int ret;
+
+	ret = tc3589x_reg_read(tc3589x, reg);
+	if (ret < 0)
+		return ret;
+
+	return ret & mask;
+}
+
+static void tc3589x_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 reg = TC3589x_GPIODATA0 + (offset / 8) * 2;
+	unsigned pos = offset % 8;
+	u8 data[] = {!!val << pos, 1 << pos};
+
+	tc3589x_block_write(tc3589x, reg, ARRAY_SIZE(data), data);
+}
+
+static int tc3589x_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned offset, int val)
+{
+	struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 reg = TC3589x_GPIODIR0 + offset / 8;
+	unsigned pos = offset % 8;
+
+	tc3589x_gpio_set(chip, offset, val);
+
+	return tc3589x_set_bits(tc3589x, reg, 1 << pos, 1 << pos);
+}
+
+static int tc3589x_gpio_direction_input(struct gpio_chip *chip,
+					unsigned offset)
+{
+	struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 reg = TC3589x_GPIODIR0 + offset / 8;
+	unsigned pos = offset % 8;
+
+	return tc3589x_set_bits(tc3589x, reg, 1 << pos, 0);
+}
+
+static int tc3589x_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	struct tc3589x_gpio *tc3589x_gpio = to_tc3589x_gpio(chip);
+
+	return tc3589x_gpio->irq_base + offset;
+}
+
+static struct gpio_chip template_chip = {
+	.label			= "tc3589x",
+	.owner			= THIS_MODULE,
+	.direction_input	= tc3589x_gpio_direction_input,
+	.get			= tc3589x_gpio_get,
+	.direction_output	= tc3589x_gpio_direction_output,
+	.set			= tc3589x_gpio_set,
+	.to_irq			= tc3589x_gpio_to_irq,
+	.can_sleep		= 1,
+};
+
+static int tc3589x_gpio_irq_set_type(unsigned int irq, unsigned int type)
+{
+	struct tc3589x_gpio *tc3589x_gpio = get_irq_chip_data(irq);
+	int offset = irq - tc3589x_gpio->irq_base;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	if (type == IRQ_TYPE_EDGE_BOTH) {
+		tc3589x_gpio->regs[REG_IBE][regoffset] |= mask;
+		return 0;
+	}
+
+	tc3589x_gpio->regs[REG_IBE][regoffset] &= ~mask;
+
+	if (type == IRQ_TYPE_LEVEL_LOW || type == IRQ_TYPE_LEVEL_HIGH)
+		tc3589x_gpio->regs[REG_IS][regoffset] |= mask;
+	else
+		tc3589x_gpio->regs[REG_IS][regoffset] &= ~mask;
+
+	if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH)
+		tc3589x_gpio->regs[REG_IEV][regoffset] |= mask;
+	else
+		tc3589x_gpio->regs[REG_IEV][regoffset] &= ~mask;
+
+	return 0;
+}
+
+static void tc3589x_gpio_irq_lock(unsigned int irq)
+{
+	struct tc3589x_gpio *tc3589x_gpio = get_irq_chip_data(irq);
+
+	mutex_lock(&tc3589x_gpio->irq_lock);
+}
+
+static void tc3589x_gpio_irq_sync_unlock(unsigned int irq)
+{
+	struct tc3589x_gpio *tc3589x_gpio = get_irq_chip_data(irq);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	static const u8 regmap[] = {
+		[REG_IBE]	= TC3589x_GPIOIBE0,
+		[REG_IEV]	= TC3589x_GPIOIEV0,
+		[REG_IS]	= TC3589x_GPIOIS0,
+		[REG_IE]	= TC3589x_GPIOIE0,
+	};
+	int i, j;
+
+	for (i = 0; i < CACHE_NR_REGS; i++) {
+		for (j = 0; j < CACHE_NR_BANKS; j++) {
+			u8 old = tc3589x_gpio->oldregs[i][j];
+			u8 new = tc3589x_gpio->regs[i][j];
+
+			if (new == old)
+				continue;
+
+			tc3589x_gpio->oldregs[i][j] = new;
+			tc3589x_reg_write(tc3589x, regmap[i] + j * 8, new);
+		}
+	}
+
+	mutex_unlock(&tc3589x_gpio->irq_lock);
+}
+
+static void tc3589x_gpio_irq_mask(unsigned int irq)
+{
+	struct tc3589x_gpio *tc3589x_gpio = get_irq_chip_data(irq);
+	int offset = irq - tc3589x_gpio->irq_base;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	tc3589x_gpio->regs[REG_IE][regoffset] &= ~mask;
+}
+
+static void tc3589x_gpio_irq_unmask(unsigned int irq)
+{
+	struct tc3589x_gpio *tc3589x_gpio = get_irq_chip_data(irq);
+	int offset = irq - tc3589x_gpio->irq_base;
+	int regoffset = offset / 8;
+	int mask = 1 << (offset % 8);
+
+	tc3589x_gpio->regs[REG_IE][regoffset] |= mask;
+}
+
+static struct irq_chip tc3589x_gpio_irq_chip = {
+	.name			= "tc3589x-gpio",
+	.bus_lock		= tc3589x_gpio_irq_lock,
+	.bus_sync_unlock	= tc3589x_gpio_irq_sync_unlock,
+	.mask			= tc3589x_gpio_irq_mask,
+	.unmask			= tc3589x_gpio_irq_unmask,
+	.set_type		= tc3589x_gpio_irq_set_type,
+};
+
+static irqreturn_t tc3589x_gpio_irq(int irq, void *dev)
+{
+	struct tc3589x_gpio *tc3589x_gpio = dev;
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	u8 status[CACHE_NR_BANKS];
+	int ret;
+	int i;
+
+	ret = tc3589x_block_read(tc3589x, TC3589x_GPIOMIS0,
+				 ARRAY_SIZE(status), status);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < ARRAY_SIZE(status); i++) {
+		unsigned int stat = status[i];
+		if (!stat)
+			continue;
+
+		while (stat) {
+			int bit = __ffs(stat);
+			int line = i * 8 + bit;
+
+			handle_nested_irq(tc3589x_gpio->irq_base + line);
+			stat &= ~(1 << bit);
+		}
+
+		tc3589x_reg_write(tc3589x, TC3589x_GPIOIC0 + i, status[i]);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int tc3589x_gpio_irq_init(struct tc3589x_gpio *tc3589x_gpio)
+{
+	int base = tc3589x_gpio->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + tc3589x_gpio->chip.ngpio; irq++) {
+		set_irq_chip_data(irq, tc3589x_gpio);
+		set_irq_chip_and_handler(irq, &tc3589x_gpio_irq_chip,
+					 handle_simple_irq);
+		set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		set_irq_noprobe(irq);
+#endif
+	}
+
+	return 0;
+}
+
+static void tc3589x_gpio_irq_remove(struct tc3589x_gpio *tc3589x_gpio)
+{
+	int base = tc3589x_gpio->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + tc3589x_gpio->chip.ngpio; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip_and_handler(irq, NULL, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+static int __devinit tc3589x_gpio_probe(struct platform_device *pdev)
+{
+	struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
+	struct tc3589x_gpio_platform_data *pdata;
+	struct tc3589x_gpio *tc3589x_gpio;
+	int ret;
+	int irq;
+
+	pdata = tc3589x->pdata->gpio;
+	if (!pdata)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	tc3589x_gpio = kzalloc(sizeof(struct tc3589x_gpio), GFP_KERNEL);
+	if (!tc3589x_gpio)
+		return -ENOMEM;
+
+	mutex_init(&tc3589x_gpio->irq_lock);
+
+	tc3589x_gpio->dev = &pdev->dev;
+	tc3589x_gpio->tc3589x = tc3589x;
+
+	tc3589x_gpio->chip = template_chip;
+	tc3589x_gpio->chip.ngpio = tc3589x->num_gpio;
+	tc3589x_gpio->chip.dev = &pdev->dev;
+	tc3589x_gpio->chip.base = pdata->gpio_base;
+
+	tc3589x_gpio->irq_base = tc3589x->irq_base + TC3589x_INT_GPIO(0);
+
+	/* Bring the GPIO module out of reset */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL,
+			       TC3589x_RSTCTRL_GPIRST, 0);
+	if (ret < 0)
+		goto out_free;
+
+	ret = tc3589x_gpio_irq_init(tc3589x_gpio);
+	if (ret)
+		goto out_free;
+
+	ret = request_threaded_irq(irq, NULL, tc3589x_gpio_irq, IRQF_ONESHOT,
+				   "tc3589x-gpio", tc3589x_gpio);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+		goto out_removeirq;
+	}
+
+	ret = gpiochip_add(&tc3589x_gpio->chip);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret);
+		goto out_freeirq;
+	}
+
+	if (pdata->setup)
+		pdata->setup(tc3589x, tc3589x_gpio->chip.base);
+
+	platform_set_drvdata(pdev, tc3589x_gpio);
+
+	return 0;
+
+out_freeirq:
+	free_irq(irq, tc3589x_gpio);
+out_removeirq:
+	tc3589x_gpio_irq_remove(tc3589x_gpio);
+out_free:
+	kfree(tc3589x_gpio);
+	return ret;
+}
+
+static int __devexit tc3589x_gpio_remove(struct platform_device *pdev)
+{
+	struct tc3589x_gpio *tc3589x_gpio = platform_get_drvdata(pdev);
+	struct tc3589x *tc3589x = tc3589x_gpio->tc3589x;
+	struct tc3589x_gpio_platform_data *pdata = tc3589x->pdata->gpio;
+	int irq = platform_get_irq(pdev, 0);
+	int ret;
+
+	if (pdata->remove)
+		pdata->remove(tc3589x, tc3589x_gpio->chip.base);
+
+	ret = gpiochip_remove(&tc3589x_gpio->chip);
+	if (ret < 0) {
+		dev_err(tc3589x_gpio->dev,
+			"unable to remove gpiochip: %d\n", ret);
+		return ret;
+	}
+
+	free_irq(irq, tc3589x_gpio);
+	tc3589x_gpio_irq_remove(tc3589x_gpio);
+
+	platform_set_drvdata(pdev, NULL);
+	kfree(tc3589x_gpio);
+
+	return 0;
+}
+
+static struct platform_driver tc3589x_gpio_driver = {
+	.driver.name	= "tc3589x-gpio",
+	.driver.owner	= THIS_MODULE,
+	.probe		= tc3589x_gpio_probe,
+	.remove		= __devexit_p(tc3589x_gpio_remove),
+};
+
+static int __init tc3589x_gpio_init(void)
+{
+	return platform_driver_register(&tc3589x_gpio_driver);
+}
+subsys_initcall(tc3589x_gpio_init);
+
+static void __exit tc3589x_gpio_exit(void)
+{
+	platform_driver_unregister(&tc3589x_gpio_driver);
+}
+module_exit(tc3589x_gpio_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TC3589x GPIO driver");
+MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 6985cb1da72..2baa6708e44 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -156,12 +156,12 @@ static struct drm_conn_prop_enum_list drm_connector_enum_list[] =
 	{ DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO", 0 },
 	{ DRM_MODE_CONNECTOR_LVDS, "LVDS", 0 },
 	{ DRM_MODE_CONNECTOR_Component, "Component", 0 },
-	{ DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN", 0 },
-	{ DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort", 0 },
-	{ DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A", 0 },
-	{ DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B", 0 },
+	{ DRM_MODE_CONNECTOR_9PinDIN, "DIN", 0 },
+	{ DRM_MODE_CONNECTOR_DisplayPort, "DP", 0 },
+	{ DRM_MODE_CONNECTOR_HDMIA, "HDMI-A", 0 },
+	{ DRM_MODE_CONNECTOR_HDMIB, "HDMI-B", 0 },
 	{ DRM_MODE_CONNECTOR_TV, "TV", 0 },
-	{ DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort", 0 },
+	{ DRM_MODE_CONNECTOR_eDP, "eDP", 0 },
 };
 
 static struct drm_prop_enum_list drm_encoder_enum_list[] =
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index dcbeb98f195..2d4e17a004d 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -276,7 +276,7 @@ static bool drm_encoder_crtc_ok(struct drm_encoder *encoder,
 	struct drm_crtc *tmp;
 	int crtc_mask = 1;
 
-	WARN(!crtc, "checking null crtc?");
+	WARN(!crtc, "checking null crtc?\n");
 
 	dev = crtc->dev;
 
@@ -471,6 +471,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 	int count = 0, ro, fail = 0;
 	struct drm_crtc_helper_funcs *crtc_funcs;
 	int ret = 0;
+	int i;
 
 	DRM_DEBUG_KMS("\n");
 
@@ -666,6 +667,12 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
 		if (ret != 0)
 			goto fail;
 	}
+	DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
+	for (i = 0; i < set->num_connectors; i++) {
+		DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
+			      drm_get_connector_name(set->connectors[i]));
+		set->connectors[i]->dpms = DRM_MODE_DPMS_ON;
+	}
 
 	kfree(save_connectors);
 	kfree(save_encoders);
@@ -841,7 +848,7 @@ static void output_poll_execute(struct work_struct *work)
 	struct delayed_work *delayed_work = to_delayed_work(work);
 	struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
 	struct drm_connector *connector;
-	enum drm_connector_status old_status, status;
+	enum drm_connector_status old_status;
 	bool repoll = false, changed = false;
 
 	if (!drm_kms_helper_poll)
@@ -866,8 +873,12 @@ static void output_poll_execute(struct work_struct *work)
 		    !(connector->polled & DRM_CONNECTOR_POLL_HPD))
 			continue;
 
-		status = connector->funcs->detect(connector, false);
-		if (old_status != status)
+		connector->status = connector->funcs->detect(connector, false);
+		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %d to %d\n",
+			      connector->base.id,
+			      drm_get_connector_name(connector),
+			      old_status, connector->status);
+		if (old_status != connector->status)
 			changed = true;
 	}
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index c1a26217a53..a245d17165a 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -240,7 +240,7 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
 			.addr	= DDC_ADDR,
 			.flags	= I2C_M_RD,
 			.len	= len,
-			.buf	= buf + start,
+			.buf	= buf,
 		}
 	};
 
@@ -253,7 +253,7 @@ drm_do_probe_ddc_edid(struct i2c_adapter *adapter, unsigned char *buf,
 static u8 *
 drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
 {
-	int i, j = 0;
+	int i, j = 0, valid_extensions = 0;
 	u8 *block, *new;
 
 	if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
@@ -280,14 +280,28 @@ drm_do_get_edid(struct drm_connector *connector, struct i2c_adapter *adapter)
 
 	for (j = 1; j <= block[0x7e]; j++) {
 		for (i = 0; i < 4; i++) {
-			if (drm_do_probe_ddc_edid(adapter, block, j,
-						  EDID_LENGTH))
+			if (drm_do_probe_ddc_edid(adapter,
+				  block + (valid_extensions + 1) * EDID_LENGTH,
+				  j, EDID_LENGTH))
 				goto out;
-			if (drm_edid_block_valid(block + j * EDID_LENGTH))
+			if (drm_edid_block_valid(block + (valid_extensions + 1) * EDID_LENGTH)) {
+				valid_extensions++;
 				break;
+			}
 		}
 		if (i == 4)
-			goto carp;
+			dev_warn(connector->dev->dev,
+			 "%s: Ignoring invalid EDID block %d.\n",
+			 drm_get_connector_name(connector), j);
+	}
+
+	if (valid_extensions != block[0x7e]) {
+		block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
+		block[0x7e] = valid_extensions;
+		new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
+		if (!new)
+			goto out;
+		block = new;
 	}
 
 	return block;
diff --git a/drivers/gpu/drm/drm_fops.c b/drivers/gpu/drm/drm_fops.c
index b744dad5c23..a39794bac04 100644
--- a/drivers/gpu/drm/drm_fops.c
+++ b/drivers/gpu/drm/drm_fops.c
@@ -37,7 +37,6 @@
 #include "drmP.h"
 #include <linux/poll.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 
 /* from BKL pushdown: note that nothing else serializes idr_find() */
 DEFINE_MUTEX(drm_global_mutex);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 9d3a5030b6e..16d5155edad 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -585,10 +585,13 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
 	struct timeval now;
 	unsigned long flags;
 	unsigned int seq;
+	int ret;
 
 	e = kzalloc(sizeof *e, GFP_KERNEL);
-	if (e == NULL)
-		return -ENOMEM;
+	if (e == NULL) {
+		ret = -ENOMEM;
+		goto err_put;
+	}
 
 	e->pipe = pipe;
 	e->base.pid = current->pid;
@@ -603,9 +606,8 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
 	spin_lock_irqsave(&dev->event_lock, flags);
 
 	if (file_priv->event_space < sizeof e->event) {
-		spin_unlock_irqrestore(&dev->event_lock, flags);
-		kfree(e);
-		return -ENOMEM;
+		ret = -EBUSY;
+		goto err_unlock;
 	}
 
 	file_priv->event_space -= sizeof e->event;
@@ -626,7 +628,7 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
 	if ((seq - vblwait->request.sequence) <= (1 << 23)) {
 		e->event.tv_sec = now.tv_sec;
 		e->event.tv_usec = now.tv_usec;
-		drm_vblank_put(dev, e->pipe);
+		drm_vblank_put(dev, pipe);
 		list_add_tail(&e->base.link, &e->base.file_priv->event_list);
 		wake_up_interruptible(&e->base.file_priv->event_wait);
 		trace_drm_vblank_event_delivered(current->pid, pipe,
@@ -638,6 +640,13 @@ static int drm_queue_vblank_event(struct drm_device *dev, int pipe,
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 
 	return 0;
+
+err_unlock:
+	spin_unlock_irqrestore(&dev->event_lock, flags);
+	kfree(e);
+err_put:
+	drm_vblank_put(dev, pipe);
+	return ret;
 }
 
 /**
diff --git a/drivers/gpu/drm/i915/dvo_ch7017.c b/drivers/gpu/drm/i915/dvo_ch7017.c
index af70337567c..d3e8c540f77 100644
--- a/drivers/gpu/drm/i915/dvo_ch7017.c
+++ b/drivers/gpu/drm/i915/dvo_ch7017.c
@@ -242,7 +242,7 @@ fail:
 
 static enum drm_connector_status ch7017_detect(struct intel_dvo_device *dvo)
 {
-	return connector_status_unknown;
+	return connector_status_connected;
 }
 
 static enum drm_mode_status ch7017_mode_valid(struct intel_dvo_device *dvo,
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 7a26f4dd21a..cb900dc83d9 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -34,6 +34,7 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 #include "i915_trace.h"
+#include "../../../platform/x86/intel_ips.h"
 #include <linux/pci.h>
 #include <linux/vgaarb.h>
 #include <linux/acpi.h>
@@ -767,6 +768,9 @@ static int i915_getparam(struct drm_device *dev, void *data,
 	case I915_PARAM_HAS_BLT:
 		value = HAS_BLT(dev);
 		break;
+	case I915_PARAM_HAS_COHERENT_RINGS:
+		value = 1;
+		break;
 	default:
 		DRM_DEBUG_DRIVER("Unknown parameter %d\n",
 				 param->param);
@@ -1868,6 +1872,26 @@ out_unlock:
 EXPORT_SYMBOL_GPL(i915_gpu_turbo_disable);
 
 /**
+ * Tells the intel_ips driver that the i915 driver is now loaded, if
+ * IPS got loaded first.
+ *
+ * This awkward dance is so that neither module has to depend on the
+ * other in order for IPS to do the appropriate communication of
+ * GPU turbo limits to i915.
+ */
+static void
+ips_ping_for_i915_load(void)
+{
+	void (*link)(void);
+
+	link = symbol_get(ips_link_to_i915_driver);
+	if (link) {
+		link();
+		symbol_put(ips_link_to_i915_driver);
+	}
+}
+
+/**
  * i915_driver_load - setup chip and create an initial config
  * @dev: DRM device
  * @flags: startup flags
@@ -2072,6 +2096,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
 	dev_priv->mchdev_lock = &mchdev_lock;
 	spin_unlock(&mchdev_lock);
 
+	ips_ping_for_i915_load();
+
 	return 0;
 
 out_workqueue_free:
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 3467dd42076..f737960712e 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -44,7 +44,7 @@ unsigned int i915_fbpercrtc = 0;
 module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
 
 unsigned int i915_powersave = 1;
-module_param_named(powersave, i915_powersave, int, 0400);
+module_param_named(powersave, i915_powersave, int, 0600);
 
 unsigned int i915_lvds_downclock = 0;
 module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
@@ -150,7 +150,8 @@ static const struct intel_device_info intel_ironlake_d_info = {
 
 static const struct intel_device_info intel_ironlake_m_info = {
 	.gen = 5, .is_mobile = 1,
-	.need_gfx_hws = 1, .has_fbc = 1, .has_rc6 = 1, .has_hotplug = 1,
+	.need_gfx_hws = 1, .has_rc6 = 1, .has_hotplug = 1,
+	.has_fbc = 0, /* disabled due to buggy hardware */
 	.has_bsd_ring = 1,
 };
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 2c2c19b6285..409826da309 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1045,6 +1045,8 @@ void i915_gem_clflush_object(struct drm_gem_object *obj);
 int i915_gem_object_set_domain(struct drm_gem_object *obj,
 			       uint32_t read_domains,
 			       uint32_t write_domain);
+int i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj,
+			      bool interruptible);
 int i915_gem_init_ringbuffer(struct drm_device *dev);
 void i915_gem_cleanup_ringbuffer(struct drm_device *dev);
 int i915_gem_do_init(struct drm_device *dev, unsigned long start,
@@ -1321,6 +1323,7 @@ static inline void i915_write(struct drm_i915_private *dev_priv, u32 reg,
 
 #define INTEL_PCH_TYPE(dev) (((struct drm_i915_private *)(dev)->dev_private)->pch_type)
 #define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
+#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
 
 #define PRIMARY_RINGBUFFER_SIZE         (128*1024)
 
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 8eb8453208b..275ec6ed43a 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -38,8 +38,7 @@
 
 static uint32_t i915_gem_get_gtt_alignment(struct drm_gem_object *obj);
 
-static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj,
-						  bool pipelined);
+static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
 static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
 static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
 static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
@@ -547,6 +546,19 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 	struct drm_i915_gem_object *obj_priv;
 	int ret = 0;
 
+	if (args->size == 0)
+		return 0;
+
+	if (!access_ok(VERIFY_WRITE,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size))
+		return -EFAULT;
+
+	ret = fault_in_pages_writeable((char __user *)(uintptr_t)args->data_ptr,
+				       args->size);
+	if (ret)
+		return -EFAULT;
+
 	ret = i915_mutex_lock_interruptible(dev);
 	if (ret)
 		return ret;
@@ -564,23 +576,6 @@ i915_gem_pread_ioctl(struct drm_device *dev, void *data,
 		goto out;
 	}
 
-	if (args->size == 0)
-		goto out;
-
-	if (!access_ok(VERIFY_WRITE,
-		       (char __user *)(uintptr_t)args->data_ptr,
-		       args->size)) {
-		ret = -EFAULT;
-		goto out;
-	}
-
-	ret = fault_in_pages_writeable((char __user *)(uintptr_t)args->data_ptr,
-				       args->size);
-	if (ret) {
-		ret = -EFAULT;
-		goto out;
-	}
-
 	ret = i915_gem_object_get_pages_or_evict(obj);
 	if (ret)
 		goto out;
@@ -981,7 +976,20 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 	struct drm_i915_gem_pwrite *args = data;
 	struct drm_gem_object *obj;
 	struct drm_i915_gem_object *obj_priv;
-	int ret = 0;
+	int ret;
+
+	if (args->size == 0)
+		return 0;
+
+	if (!access_ok(VERIFY_READ,
+		       (char __user *)(uintptr_t)args->data_ptr,
+		       args->size))
+		return -EFAULT;
+
+	ret = fault_in_pages_readable((char __user *)(uintptr_t)args->data_ptr,
+				      args->size);
+	if (ret)
+		return -EFAULT;
 
 	ret = i915_mutex_lock_interruptible(dev);
 	if (ret)
@@ -994,30 +1002,12 @@ i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
 	}
 	obj_priv = to_intel_bo(obj);
 
-
 	/* Bounds check destination. */
 	if (args->offset > obj->size || args->size > obj->size - args->offset) {
 		ret = -EINVAL;
 		goto out;
 	}
 
-	if (args->size == 0)
-		goto out;
-
-	if (!access_ok(VERIFY_READ,
-		       (char __user *)(uintptr_t)args->data_ptr,
-		       args->size)) {
-		ret = -EFAULT;
-		goto out;
-	}
-
-	ret = fault_in_pages_readable((char __user *)(uintptr_t)args->data_ptr,
-				      args->size);
-	if (ret) {
-		ret = -EFAULT;
-		goto out;
-	}
-
 	/* We can only do the GTT pwrite on untiled buffers, as otherwise
 	 * it would end up going through the fenced access, and we'll get
 	 * different detiling behavior between reading and writing.
@@ -2172,7 +2162,7 @@ i915_gem_object_unbind(struct drm_gem_object *obj)
 static int i915_ring_idle(struct drm_device *dev,
 			  struct intel_ring_buffer *ring)
 {
-	if (list_empty(&ring->gpu_write_list))
+	if (list_empty(&ring->gpu_write_list) && list_empty(&ring->active_list))
 		return 0;
 
 	i915_gem_flush_ring(dev, NULL, ring,
@@ -2190,9 +2180,7 @@ i915_gpu_idle(struct drm_device *dev)
 	int ret;
 
 	lists_empty = (list_empty(&dev_priv->mm.flushing_list) &&
-		       list_empty(&dev_priv->render_ring.active_list) &&
-		       list_empty(&dev_priv->bsd_ring.active_list) &&
-		       list_empty(&dev_priv->blt_ring.active_list));
+		       list_empty(&dev_priv->mm.active_list));
 	if (lists_empty)
 		return 0;
 
@@ -2605,7 +2593,7 @@ i915_gem_object_put_fence_reg(struct drm_gem_object *obj,
 	if (reg->gpu) {
 		int ret;
 
-		ret = i915_gem_object_flush_gpu_write_domain(obj, true);
+		ret = i915_gem_object_flush_gpu_write_domain(obj);
 		if (ret)
 			return ret;
 
@@ -2753,8 +2741,7 @@ i915_gem_clflush_object(struct drm_gem_object *obj)
 
 /** Flushes any GPU write domain for the object if it's dirty. */
 static int
-i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj,
-				       bool pipelined)
+i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
 {
 	struct drm_device *dev = obj->dev;
 	uint32_t old_write_domain;
@@ -2773,10 +2760,7 @@ i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj,
 					    obj->read_domains,
 					    old_write_domain);
 
-	if (pipelined)
-		return 0;
-
-	return i915_gem_object_wait_rendering(obj, true);
+	return 0;
 }
 
 /** Flushes the GTT write domain for the object if it's dirty. */
@@ -2837,18 +2821,15 @@ i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
 	if (obj_priv->gtt_space == NULL)
 		return -EINVAL;
 
-	ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
 	if (ret != 0)
 		return ret;
+	ret = i915_gem_object_wait_rendering(obj, true);
+	if (ret)
+		return ret;
 
 	i915_gem_object_flush_cpu_write_domain(obj);
 
-	if (write) {
-		ret = i915_gem_object_wait_rendering(obj, true);
-		if (ret)
-			return ret;
-	}
-
 	old_write_domain = obj->write_domain;
 	old_read_domains = obj->read_domains;
 
@@ -2886,7 +2867,7 @@ i915_gem_object_set_to_display_plane(struct drm_gem_object *obj,
 	if (obj_priv->gtt_space == NULL)
 		return -EINVAL;
 
-	ret = i915_gem_object_flush_gpu_write_domain(obj, true);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
 	if (ret)
 		return ret;
 
@@ -2909,6 +2890,20 @@ i915_gem_object_set_to_display_plane(struct drm_gem_object *obj,
 	return 0;
 }
 
+int
+i915_gem_object_flush_gpu(struct drm_i915_gem_object *obj,
+			  bool interruptible)
+{
+	if (!obj->active)
+		return 0;
+
+	if (obj->base.write_domain & I915_GEM_GPU_DOMAINS)
+		i915_gem_flush_ring(obj->base.dev, NULL, obj->ring,
+				    0, obj->base.write_domain);
+
+	return i915_gem_object_wait_rendering(&obj->base, interruptible);
+}
+
 /**
  * Moves a single object to the CPU read, and possibly write domain.
  *
@@ -2921,9 +2916,12 @@ i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write)
 	uint32_t old_write_domain, old_read_domains;
 	int ret;
 
-	ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
 	if (ret != 0)
 		return ret;
+	ret = i915_gem_object_wait_rendering(obj, true);
+	if (ret)
+		return ret;
 
 	i915_gem_object_flush_gtt_write_domain(obj);
 
@@ -2932,12 +2930,6 @@ i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write)
 	 */
 	i915_gem_object_set_to_full_cpu_read_domain(obj);
 
-	if (write) {
-		ret = i915_gem_object_wait_rendering(obj, true);
-		if (ret)
-			return ret;
-	}
-
 	old_write_domain = obj->write_domain;
 	old_read_domains = obj->read_domains;
 
@@ -3108,7 +3100,8 @@ i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj,
 	 * write domain
 	 */
 	if (obj->write_domain &&
-	    obj->write_domain != obj->pending_read_domains) {
+	    (obj->write_domain != obj->pending_read_domains ||
+	     obj_priv->ring != ring)) {
 		flush_domains |= obj->write_domain;
 		invalidate_domains |=
 			obj->pending_read_domains & ~obj->write_domain;
@@ -3201,9 +3194,13 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
 	if (offset == 0 && size == obj->size)
 		return i915_gem_object_set_to_cpu_domain(obj, 0);
 
-	ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+	ret = i915_gem_object_flush_gpu_write_domain(obj);
 	if (ret != 0)
 		return ret;
+	ret = i915_gem_object_wait_rendering(obj, true);
+	if (ret)
+		return ret;
+
 	i915_gem_object_flush_gtt_write_domain(obj);
 
 	/* If we're already fully in the CPU read domain, we're done. */
@@ -3250,192 +3247,230 @@ i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj,
 	return 0;
 }
 
-/**
- * Pin an object to the GTT and evaluate the relocations landing in it.
- */
 static int
-i915_gem_execbuffer_relocate(struct drm_i915_gem_object *obj,
-			     struct drm_file *file_priv,
-			     struct drm_i915_gem_exec_object2 *entry)
+i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
+				   struct drm_file *file_priv,
+				   struct drm_i915_gem_exec_object2 *entry,
+				   struct drm_i915_gem_relocation_entry *reloc)
 {
 	struct drm_device *dev = obj->base.dev;
-	drm_i915_private_t *dev_priv = dev->dev_private;
-	struct drm_i915_gem_relocation_entry __user *user_relocs;
-	struct drm_gem_object *target_obj = NULL;
-	uint32_t target_handle = 0;
-	int i, ret = 0;
+	struct drm_gem_object *target_obj;
+	uint32_t target_offset;
+	int ret = -EINVAL;
 
-	user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
-	for (i = 0; i < entry->relocation_count; i++) {
-		struct drm_i915_gem_relocation_entry reloc;
-		uint32_t target_offset;
+	target_obj = drm_gem_object_lookup(dev, file_priv,
+					   reloc->target_handle);
+	if (target_obj == NULL)
+		return -ENOENT;
 
-		if (__copy_from_user_inatomic(&reloc,
-					      user_relocs+i,
-					      sizeof(reloc))) {
-			ret = -EFAULT;
-			break;
-		}
+	target_offset = to_intel_bo(target_obj)->gtt_offset;
 
-		if (reloc.target_handle != target_handle) {
-			drm_gem_object_unreference(target_obj);
+#if WATCH_RELOC
+	DRM_INFO("%s: obj %p offset %08x target %d "
+		 "read %08x write %08x gtt %08x "
+		 "presumed %08x delta %08x\n",
+		 __func__,
+		 obj,
+		 (int) reloc->offset,
+		 (int) reloc->target_handle,
+		 (int) reloc->read_domains,
+		 (int) reloc->write_domain,
+		 (int) target_offset,
+		 (int) reloc->presumed_offset,
+		 reloc->delta);
+#endif
 
-			target_obj = drm_gem_object_lookup(dev, file_priv,
-							   reloc.target_handle);
-			if (target_obj == NULL) {
-				ret = -ENOENT;
-				break;
-			}
+	/* The target buffer should have appeared before us in the
+	 * exec_object list, so it should have a GTT space bound by now.
+	 */
+	if (target_offset == 0) {
+		DRM_ERROR("No GTT space found for object %d\n",
+			  reloc->target_handle);
+		goto err;
+	}
 
-			target_handle = reloc.target_handle;
-		}
-		target_offset = to_intel_bo(target_obj)->gtt_offset;
+	/* Validate that the target is in a valid r/w GPU domain */
+	if (reloc->write_domain & (reloc->write_domain - 1)) {
+		DRM_ERROR("reloc with multiple write domains: "
+			  "obj %p target %d offset %d "
+			  "read %08x write %08x",
+			  obj, reloc->target_handle,
+			  (int) reloc->offset,
+			  reloc->read_domains,
+			  reloc->write_domain);
+		goto err;
+	}
+	if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||
+	    reloc->read_domains & I915_GEM_DOMAIN_CPU) {
+		DRM_ERROR("reloc with read/write CPU domains: "
+			  "obj %p target %d offset %d "
+			  "read %08x write %08x",
+			  obj, reloc->target_handle,
+			  (int) reloc->offset,
+			  reloc->read_domains,
+			  reloc->write_domain);
+		goto err;
+	}
+	if (reloc->write_domain && target_obj->pending_write_domain &&
+	    reloc->write_domain != target_obj->pending_write_domain) {
+		DRM_ERROR("Write domain conflict: "
+			  "obj %p target %d offset %d "
+			  "new %08x old %08x\n",
+			  obj, reloc->target_handle,
+			  (int) reloc->offset,
+			  reloc->write_domain,
+			  target_obj->pending_write_domain);
+		goto err;
+	}
 
-#if WATCH_RELOC
-		DRM_INFO("%s: obj %p offset %08x target %d "
-			 "read %08x write %08x gtt %08x "
-			 "presumed %08x delta %08x\n",
-			 __func__,
-			 obj,
-			 (int) reloc.offset,
-			 (int) reloc.target_handle,
-			 (int) reloc.read_domains,
-			 (int) reloc.write_domain,
-			 (int) target_offset,
-			 (int) reloc.presumed_offset,
-			 reloc.delta);
-#endif
+	target_obj->pending_read_domains |= reloc->read_domains;
+	target_obj->pending_write_domain |= reloc->write_domain;
 
-		/* The target buffer should have appeared before us in the
-		 * exec_object list, so it should have a GTT space bound by now.
-		 */
-		if (target_offset == 0) {
-			DRM_ERROR("No GTT space found for object %d\n",
-				  reloc.target_handle);
-			ret = -EINVAL;
-			break;
-		}
+	/* If the relocation already has the right value in it, no
+	 * more work needs to be done.
+	 */
+	if (target_offset == reloc->presumed_offset)
+		goto out;
 
-		/* Validate that the target is in a valid r/w GPU domain */
-		if (reloc.write_domain & (reloc.write_domain - 1)) {
-			DRM_ERROR("reloc with multiple write domains: "
-				  "obj %p target %d offset %d "
-				  "read %08x write %08x",
-				  obj, reloc.target_handle,
-				  (int) reloc.offset,
-				  reloc.read_domains,
-				  reloc.write_domain);
-			ret = -EINVAL;
-			break;
-		}
-		if (reloc.write_domain & I915_GEM_DOMAIN_CPU ||
-		    reloc.read_domains & I915_GEM_DOMAIN_CPU) {
-			DRM_ERROR("reloc with read/write CPU domains: "
-				  "obj %p target %d offset %d "
-				  "read %08x write %08x",
-				  obj, reloc.target_handle,
-				  (int) reloc.offset,
-				  reloc.read_domains,
-				  reloc.write_domain);
-			ret = -EINVAL;
-			break;
-		}
-		if (reloc.write_domain && target_obj->pending_write_domain &&
-		    reloc.write_domain != target_obj->pending_write_domain) {
-			DRM_ERROR("Write domain conflict: "
-				  "obj %p target %d offset %d "
-				  "new %08x old %08x\n",
-				  obj, reloc.target_handle,
-				  (int) reloc.offset,
-				  reloc.write_domain,
-				  target_obj->pending_write_domain);
-			ret = -EINVAL;
-			break;
-		}
+	/* Check that the relocation address is valid... */
+	if (reloc->offset > obj->base.size - 4) {
+		DRM_ERROR("Relocation beyond object bounds: "
+			  "obj %p target %d offset %d size %d.\n",
+			  obj, reloc->target_handle,
+			  (int) reloc->offset,
+			  (int) obj->base.size);
+		goto err;
+	}
+	if (reloc->offset & 3) {
+		DRM_ERROR("Relocation not 4-byte aligned: "
+			  "obj %p target %d offset %d.\n",
+			  obj, reloc->target_handle,
+			  (int) reloc->offset);
+		goto err;
+	}
 
-		target_obj->pending_read_domains |= reloc.read_domains;
-		target_obj->pending_write_domain |= reloc.write_domain;
+	/* and points to somewhere within the target object. */
+	if (reloc->delta >= target_obj->size) {
+		DRM_ERROR("Relocation beyond target object bounds: "
+			  "obj %p target %d delta %d size %d.\n",
+			  obj, reloc->target_handle,
+			  (int) reloc->delta,
+			  (int) target_obj->size);
+		goto err;
+	}
 
-		/* If the relocation already has the right value in it, no
-		 * more work needs to be done.
-		 */
-		if (target_offset == reloc.presumed_offset)
-			continue;
+	reloc->delta += target_offset;
+	if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
+		uint32_t page_offset = reloc->offset & ~PAGE_MASK;
+		char *vaddr;
 
-		/* Check that the relocation address is valid... */
-		if (reloc.offset > obj->base.size - 4) {
-			DRM_ERROR("Relocation beyond object bounds: "
-				  "obj %p target %d offset %d size %d.\n",
-				  obj, reloc.target_handle,
-				  (int) reloc.offset, (int) obj->base.size);
-			ret = -EINVAL;
-			break;
-		}
-		if (reloc.offset & 3) {
-			DRM_ERROR("Relocation not 4-byte aligned: "
-				  "obj %p target %d offset %d.\n",
-				  obj, reloc.target_handle,
-				  (int) reloc.offset);
-			ret = -EINVAL;
-			break;
-		}
+		vaddr = kmap_atomic(obj->pages[reloc->offset >> PAGE_SHIFT]);
+		*(uint32_t *)(vaddr + page_offset) = reloc->delta;
+		kunmap_atomic(vaddr);
+	} else {
+		struct drm_i915_private *dev_priv = dev->dev_private;
+		uint32_t __iomem *reloc_entry;
+		void __iomem *reloc_page;
 
-		/* and points to somewhere within the target object. */
-		if (reloc.delta >= target_obj->size) {
-			DRM_ERROR("Relocation beyond target object bounds: "
-				  "obj %p target %d delta %d size %d.\n",
-				  obj, reloc.target_handle,
-				  (int) reloc.delta, (int) target_obj->size);
-			ret = -EINVAL;
-			break;
-		}
+		ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1);
+		if (ret)
+			goto err;
 
-		reloc.delta += target_offset;
-		if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
-			uint32_t page_offset = reloc.offset & ~PAGE_MASK;
-			char *vaddr;
+		/* Map the page containing the relocation we're going to perform.  */
+		reloc->offset += obj->gtt_offset;
+		reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
+						      reloc->offset & PAGE_MASK);
+		reloc_entry = (uint32_t __iomem *)
+			(reloc_page + (reloc->offset & ~PAGE_MASK));
+		iowrite32(reloc->delta, reloc_entry);
+		io_mapping_unmap_atomic(reloc_page);
+	}
 
-			vaddr = kmap_atomic(obj->pages[reloc.offset >> PAGE_SHIFT]);
-			*(uint32_t *)(vaddr + page_offset) = reloc.delta;
-			kunmap_atomic(vaddr);
-		} else {
-			uint32_t __iomem *reloc_entry;
-			void __iomem *reloc_page;
+	/* and update the user's relocation entry */
+	reloc->presumed_offset = target_offset;
 
-			ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1);
-			if (ret)
-				break;
+out:
+	ret = 0;
+err:
+	drm_gem_object_unreference(target_obj);
+	return ret;
+}
 
-			/* Map the page containing the relocation we're going to perform.  */
-			reloc.offset += obj->gtt_offset;
-			reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
-							      reloc.offset & PAGE_MASK);
-			reloc_entry = (uint32_t __iomem *)
-				(reloc_page + (reloc.offset & ~PAGE_MASK));
-			iowrite32(reloc.delta, reloc_entry);
-			io_mapping_unmap_atomic(reloc_page);
-		}
+static int
+i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
+				    struct drm_file *file_priv,
+				    struct drm_i915_gem_exec_object2 *entry)
+{
+	struct drm_i915_gem_relocation_entry __user *user_relocs;
+	int i, ret;
+
+	user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
+	for (i = 0; i < entry->relocation_count; i++) {
+		struct drm_i915_gem_relocation_entry reloc;
+
+		if (__copy_from_user_inatomic(&reloc,
+					      user_relocs+i,
+					      sizeof(reloc)))
+			return -EFAULT;
+
+		ret = i915_gem_execbuffer_relocate_entry(obj, file_priv, entry, &reloc);
+		if (ret)
+			return ret;
 
-		/* and update the user's relocation entry */
-		reloc.presumed_offset = target_offset;
 		if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset,
-					      &reloc.presumed_offset,
-					      sizeof(reloc.presumed_offset))) {
-		    ret = -EFAULT;
-		    break;
-		}
+					    &reloc.presumed_offset,
+					    sizeof(reloc.presumed_offset)))
+			return -EFAULT;
 	}
 
-	drm_gem_object_unreference(target_obj);
-	return ret;
+	return 0;
+}
+
+static int
+i915_gem_execbuffer_relocate_object_slow(struct drm_i915_gem_object *obj,
+					 struct drm_file *file_priv,
+					 struct drm_i915_gem_exec_object2 *entry,
+					 struct drm_i915_gem_relocation_entry *relocs)
+{
+	int i, ret;
+
+	for (i = 0; i < entry->relocation_count; i++) {
+		ret = i915_gem_execbuffer_relocate_entry(obj, file_priv, entry, &relocs[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int
-i915_gem_execbuffer_pin(struct drm_device *dev,
-			struct drm_file *file,
-			struct drm_gem_object **object_list,
-			struct drm_i915_gem_exec_object2 *exec_list,
-			int count)
+i915_gem_execbuffer_relocate(struct drm_device *dev,
+			     struct drm_file *file,
+			     struct drm_gem_object **object_list,
+			     struct drm_i915_gem_exec_object2 *exec_list,
+			     int count)
+{
+	int i, ret;
+
+	for (i = 0; i < count; i++) {
+		struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+		obj->base.pending_read_domains = 0;
+		obj->base.pending_write_domain = 0;
+		ret = i915_gem_execbuffer_relocate_object(obj, file,
+							  &exec_list[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int
+i915_gem_execbuffer_reserve(struct drm_device *dev,
+			    struct drm_file *file,
+			    struct drm_gem_object **object_list,
+			    struct drm_i915_gem_exec_object2 *exec_list,
+			    int count)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	int ret, i, retry;
@@ -3497,6 +3532,133 @@ i915_gem_execbuffer_pin(struct drm_device *dev,
 	return 0;
 }
 
+static int
+i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
+				  struct drm_file *file,
+				  struct drm_gem_object **object_list,
+				  struct drm_i915_gem_exec_object2 *exec_list,
+				  int count)
+{
+	struct drm_i915_gem_relocation_entry *reloc;
+	int i, total, ret;
+
+	for (i = 0; i < count; i++) {
+		struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+		obj->in_execbuffer = false;
+	}
+
+	mutex_unlock(&dev->struct_mutex);
+
+	total = 0;
+	for (i = 0; i < count; i++)
+		total += exec_list[i].relocation_count;
+
+	reloc = drm_malloc_ab(total, sizeof(*reloc));
+	if (reloc == NULL) {
+		mutex_lock(&dev->struct_mutex);
+		return -ENOMEM;
+	}
+
+	total = 0;
+	for (i = 0; i < count; i++) {
+		struct drm_i915_gem_relocation_entry __user *user_relocs;
+
+		user_relocs = (void __user *)(uintptr_t)exec_list[i].relocs_ptr;
+
+		if (copy_from_user(reloc+total, user_relocs,
+				   exec_list[i].relocation_count *
+				   sizeof(*reloc))) {
+			ret = -EFAULT;
+			mutex_lock(&dev->struct_mutex);
+			goto err;
+		}
+
+		total += exec_list[i].relocation_count;
+	}
+
+	ret = i915_mutex_lock_interruptible(dev);
+	if (ret) {
+		mutex_lock(&dev->struct_mutex);
+		goto err;
+	}
+
+	ret = i915_gem_execbuffer_reserve(dev, file,
+					  object_list, exec_list,
+					  count);
+	if (ret)
+		goto err;
+
+	total = 0;
+	for (i = 0; i < count; i++) {
+		struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+		obj->base.pending_read_domains = 0;
+		obj->base.pending_write_domain = 0;
+		ret = i915_gem_execbuffer_relocate_object_slow(obj, file,
+							       &exec_list[i],
+							       reloc + total);
+		if (ret)
+			goto err;
+
+		total += exec_list[i].relocation_count;
+	}
+
+	/* Leave the user relocations as are, this is the painfully slow path,
+	 * and we want to avoid the complication of dropping the lock whilst
+	 * having buffers reserved in the aperture and so causing spurious
+	 * ENOSPC for random operations.
+	 */
+
+err:
+	drm_free_large(reloc);
+	return ret;
+}
+
+static int
+i915_gem_execbuffer_move_to_gpu(struct drm_device *dev,
+				struct drm_file *file,
+				struct intel_ring_buffer *ring,
+				struct drm_gem_object **objects,
+				int count)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int ret, i;
+
+	/* Zero the global flush/invalidate flags. These
+	 * will be modified as new domains are computed
+	 * for each object
+	 */
+	dev->invalidate_domains = 0;
+	dev->flush_domains = 0;
+	dev_priv->mm.flush_rings = 0;
+	for (i = 0; i < count; i++)
+		i915_gem_object_set_to_gpu_domain(objects[i], ring);
+
+	if (dev->invalidate_domains | dev->flush_domains) {
+#if WATCH_EXEC
+		DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
+			  __func__,
+			 dev->invalidate_domains,
+			 dev->flush_domains);
+#endif
+		i915_gem_flush(dev, file,
+			       dev->invalidate_domains,
+			       dev->flush_domains,
+			       dev_priv->mm.flush_rings);
+	}
+
+	for (i = 0; i < count; i++) {
+		struct drm_i915_gem_object *obj = to_intel_bo(objects[i]);
+		/* XXX replace with semaphores */
+		if (obj->ring && ring != obj->ring) {
+			ret = i915_gem_object_wait_rendering(&obj->base, true);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
 /* Throttle our rendering by waiting until the ring has completed our requests
  * emitted over 20 msec ago.
  *
@@ -3580,8 +3742,15 @@ validate_exec_list(struct drm_i915_gem_exec_object2 *exec,
 
 	for (i = 0; i < count; i++) {
 		char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr;
-		size_t length = exec[i].relocation_count * sizeof(struct drm_i915_gem_relocation_entry);
+		int length; /* limited by fault_in_pages_readable() */
+
+		/* First check for malicious input causing overflow */
+		if (exec[i].relocation_count >
+		    INT_MAX / sizeof(struct drm_i915_gem_relocation_entry))
+			return -EINVAL;
 
+		length = exec[i].relocation_count *
+			sizeof(struct drm_i915_gem_relocation_entry);
 		if (!access_ok(VERIFY_READ, ptr, length))
 			return -EFAULT;
 
@@ -3724,18 +3893,24 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 	}
 
 	/* Move the objects en-masse into the GTT, evicting if necessary. */
-	ret = i915_gem_execbuffer_pin(dev, file,
-				      object_list, exec_list,
-				      args->buffer_count);
+	ret = i915_gem_execbuffer_reserve(dev, file,
+					  object_list, exec_list,
+					  args->buffer_count);
 	if (ret)
 		goto err;
 
 	/* The objects are in their final locations, apply the relocations. */
-	for (i = 0; i < args->buffer_count; i++) {
-		struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
-		obj->base.pending_read_domains = 0;
-		obj->base.pending_write_domain = 0;
-		ret = i915_gem_execbuffer_relocate(obj, file, &exec_list[i]);
+	ret = i915_gem_execbuffer_relocate(dev, file,
+					   object_list, exec_list,
+					   args->buffer_count);
+	if (ret) {
+		if (ret == -EFAULT) {
+			ret = i915_gem_execbuffer_relocate_slow(dev, file,
+								object_list,
+								exec_list,
+								args->buffer_count);
+			BUG_ON(!mutex_is_locked(&dev->struct_mutex));
+		}
 		if (ret)
 			goto err;
 	}
@@ -3757,33 +3932,10 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 		goto err;
 	}
 
-	/* Zero the global flush/invalidate flags. These
-	 * will be modified as new domains are computed
-	 * for each object
-	 */
-	dev->invalidate_domains = 0;
-	dev->flush_domains = 0;
-	dev_priv->mm.flush_rings = 0;
-
-	for (i = 0; i < args->buffer_count; i++) {
-		struct drm_gem_object *obj = object_list[i];
-
-		/* Compute new gpu domains and update invalidate/flush */
-		i915_gem_object_set_to_gpu_domain(obj, ring);
-	}
-
-	if (dev->invalidate_domains | dev->flush_domains) {
-#if WATCH_EXEC
-		DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n",
-			  __func__,
-			 dev->invalidate_domains,
-			 dev->flush_domains);
-#endif
-		i915_gem_flush(dev, file,
-			       dev->invalidate_domains,
-			       dev->flush_domains,
-			       dev_priv->mm.flush_rings);
-	}
+	ret = i915_gem_execbuffer_move_to_gpu(dev, file, ring,
+					      object_list, args->buffer_count);
+	if (ret)
+		goto err;
 
 	for (i = 0; i < args->buffer_count; i++) {
 		struct drm_gem_object *obj = object_list[i];
@@ -4043,8 +4195,7 @@ i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment)
 			alignment = i915_gem_get_gtt_alignment(obj);
 		if (obj_priv->gtt_offset & (alignment - 1)) {
 			WARN(obj_priv->pin_count,
-			     "bo is already pinned with incorrect alignment:"
-			     " offset=%x, req.alignment=%x\n",
+			     "bo is already pinned with incorrect alignment: offset=%x, req.alignment=%x\n",
 			     obj_priv->gtt_offset, alignment);
 			ret = i915_gem_object_unbind(obj);
 			if (ret)
@@ -4223,10 +4374,20 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data,
 		 * use this buffer rather sooner than later, so issuing the required
 		 * flush earlier is beneficial.
 		 */
-		if (obj->write_domain & I915_GEM_GPU_DOMAINS)
+		if (obj->write_domain & I915_GEM_GPU_DOMAINS) {
 			i915_gem_flush_ring(dev, file_priv,
 					    obj_priv->ring,
 					    0, obj->write_domain);
+		} else if (obj_priv->ring->outstanding_lazy_request) {
+			/* This ring is not being cleared by active usage,
+			 * so emit a request to do so.
+			 */
+			u32 seqno = i915_add_request(dev,
+						     NULL, NULL,
+						     obj_priv->ring);
+			if (seqno == 0)
+				ret = -ENOMEM;
+		}
 
 		/* Update the active list for the hardware's current position.
 		 * Otherwise this only updates on a delayed timer or when irqs
@@ -4856,17 +5017,24 @@ i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
 		     struct drm_file *file_priv)
 {
 	struct drm_i915_gem_object *obj_priv = to_intel_bo(obj);
-	void *obj_addr;
-	int ret;
-	char __user *user_data;
+	void *vaddr = obj_priv->phys_obj->handle->vaddr + args->offset;
+	char __user *user_data = (char __user *) (uintptr_t) args->data_ptr;
 
-	user_data = (char __user *) (uintptr_t) args->data_ptr;
-	obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset;
+	DRM_DEBUG_DRIVER("vaddr %p, %lld\n", vaddr, args->size);
 
-	DRM_DEBUG_DRIVER("obj_addr %p, %lld\n", obj_addr, args->size);
-	ret = copy_from_user(obj_addr, user_data, args->size);
-	if (ret)
-		return -EFAULT;
+	if (__copy_from_user_inatomic_nocache(vaddr, user_data, args->size)) {
+		unsigned long unwritten;
+
+		/* The physical object once assigned is fixed for the lifetime
+		 * of the obj, so we can safely drop the lock and continue
+		 * to access vaddr.
+		 */
+		mutex_unlock(&dev->struct_mutex);
+		unwritten = copy_from_user(vaddr, user_data, args->size);
+		mutex_lock(&dev->struct_mutex);
+		if (unwritten)
+			return -EFAULT;
+	}
 
 	drm_agp_chipset_flush(dev);
 	return 0;
@@ -4900,9 +5068,7 @@ i915_gpu_is_active(struct drm_device *dev)
 	int lists_empty;
 
 	lists_empty = list_empty(&dev_priv->mm.flushing_list) &&
-		      list_empty(&dev_priv->render_ring.active_list) &&
-		      list_empty(&dev_priv->bsd_ring.active_list) &&
-		      list_empty(&dev_priv->blt_ring.active_list);
+		      list_empty(&dev_priv->mm.active_list);
 
 	return !lists_empty;
 }
diff --git a/drivers/gpu/drm/i915/i915_gem_evict.c b/drivers/gpu/drm/i915/i915_gem_evict.c
index 43a4013f53f..d8ae7d1d0cc 100644
--- a/drivers/gpu/drm/i915/i915_gem_evict.c
+++ b/drivers/gpu/drm/i915/i915_gem_evict.c
@@ -165,9 +165,7 @@ i915_gem_evict_everything(struct drm_device *dev)
 
 	lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
 		       list_empty(&dev_priv->mm.flushing_list) &&
-		       list_empty(&dev_priv->render_ring.active_list) &&
-		       list_empty(&dev_priv->bsd_ring.active_list) &&
-		       list_empty(&dev_priv->blt_ring.active_list));
+		       list_empty(&dev_priv->mm.active_list));
 	if (lists_empty)
 		return -ENOSPC;
 
@@ -184,9 +182,7 @@ i915_gem_evict_everything(struct drm_device *dev)
 
 	lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
 		       list_empty(&dev_priv->mm.flushing_list) &&
-		       list_empty(&dev_priv->render_ring.active_list) &&
-		       list_empty(&dev_priv->bsd_ring.active_list) &&
-		       list_empty(&dev_priv->blt_ring.active_list));
+		       list_empty(&dev_priv->mm.active_list));
 	BUG_ON(!lists_empty);
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 25ed911a311..cb8f4342927 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2471,6 +2471,9 @@
 # define MARIUNIT_CLOCK_GATE_DISABLE		(1 << 18)
 # define SVSMUNIT_CLOCK_GATE_DISABLE		(1 << 1)
 
+#define PCH_3DCGDIS1		0x46024
+# define VFMUNIT_CLOCK_GATE_DISABLE		(1 << 11)
+
 #define FDI_PLL_FREQ_CTL        0x46030
 #define  FDI_PLL_FREQ_CHANGE_REQUEST    (1<<24)
 #define  FDI_PLL_FREQ_LOCK_LIMIT_MASK   0xfff00
@@ -2588,6 +2591,13 @@
 #define ILK_DISPLAY_CHICKEN2	0x42004
 #define  ILK_DPARB_GATE	(1<<22)
 #define  ILK_VSDPFD_FULL	(1<<21)
+#define ILK_DISPLAY_CHICKEN_FUSES	0x42014
+#define  ILK_INTERNAL_GRAPHICS_DISABLE	(1<<31)
+#define  ILK_INTERNAL_DISPLAY_DISABLE	(1<<30)
+#define  ILK_DISPLAY_DEBUG_DISABLE	(1<<29)
+#define  ILK_HDCP_DISABLE		(1<<25)
+#define  ILK_eDP_A_DISABLE		(1<<24)
+#define  ILK_DESKTOP			(1<<23)
 #define ILK_DSPCLK_GATE		0x42020
 #define  ILK_DPARB_CLK_GATE	(1<<5)
 /* According to spec this bit 7/8/9 of 0x42020 should be set to enable FBC */
@@ -3033,6 +3043,7 @@
 #define  TRANS_DP_10BPC		(1<<9)
 #define  TRANS_DP_6BPC		(2<<9)
 #define  TRANS_DP_12BPC		(3<<9)
+#define  TRANS_DP_BPC_MASK	(3<<9)
 #define  TRANS_DP_VSYNC_ACTIVE_HIGH	(1<<4)
 #define  TRANS_DP_VSYNC_ACTIVE_LOW	0
 #define  TRANS_DP_HSYNC_ACTIVE_HIGH	(1<<3)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 989c19d2d95..42729d25da5 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -239,6 +239,16 @@ static void i915_save_modeset_reg(struct drm_device *dev)
 	if (drm_core_check_feature(dev, DRIVER_MODESET))
 		return;
 
+	/* Cursor state */
+	dev_priv->saveCURACNTR = I915_READ(CURACNTR);
+	dev_priv->saveCURAPOS = I915_READ(CURAPOS);
+	dev_priv->saveCURABASE = I915_READ(CURABASE);
+	dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
+	dev_priv->saveCURBPOS = I915_READ(CURBPOS);
+	dev_priv->saveCURBBASE = I915_READ(CURBBASE);
+	if (IS_GEN2(dev))
+		dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
 	if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL);
 		dev_priv->saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL);
@@ -529,6 +539,16 @@ static void i915_restore_modeset_reg(struct drm_device *dev)
 	I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
 	I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
 
+	/* Cursor state */
+	I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
+	I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
+	I915_WRITE(CURABASE, dev_priv->saveCURABASE);
+	I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
+	I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
+	I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
+	if (IS_GEN2(dev))
+		I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
+
 	return;
 }
 
@@ -543,16 +563,6 @@ void i915_save_display(struct drm_device *dev)
 	/* Don't save them in KMS mode */
 	i915_save_modeset_reg(dev);
 
-	/* Cursor state */
-	dev_priv->saveCURACNTR = I915_READ(CURACNTR);
-	dev_priv->saveCURAPOS = I915_READ(CURAPOS);
-	dev_priv->saveCURABASE = I915_READ(CURABASE);
-	dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
-	dev_priv->saveCURBPOS = I915_READ(CURBPOS);
-	dev_priv->saveCURBBASE = I915_READ(CURBBASE);
-	if (IS_GEN2(dev))
-		dev_priv->saveCURSIZE = I915_READ(CURSIZE);
-
 	/* CRT state */
 	if (HAS_PCH_SPLIT(dev)) {
 		dev_priv->saveADPA = I915_READ(PCH_ADPA);
@@ -657,16 +667,6 @@ void i915_restore_display(struct drm_device *dev)
 	/* Don't restore them in KMS mode */
 	i915_restore_modeset_reg(dev);
 
-	/* Cursor state */
-	I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
-	I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
-	I915_WRITE(CURABASE, dev_priv->saveCURABASE);
-	I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
-	I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
-	I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
-	if (IS_GEN2(dev))
-		I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
-
 	/* CRT state */
 	if (HAS_PCH_SPLIT(dev))
 		I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
@@ -862,8 +862,10 @@ int i915_restore_state(struct drm_device *dev)
 	/* Clock gating state */
 	intel_init_clock_gating(dev);
 
-	if (HAS_PCH_SPLIT(dev))
+	if (HAS_PCH_SPLIT(dev)) {
 		ironlake_enable_drps(dev);
+		intel_init_emon(dev);
+	}
 
 	/* Cache mode state */
 	I915_WRITE (CACHE_MODE_0, dev_priv->saveCACHE_MODE_0 | 0xffff0000);
diff --git a/drivers/gpu/drm/i915/intel_acpi.c b/drivers/gpu/drm/i915/intel_acpi.c
index 65c88f9ba12..2cb8e0b9f1e 100644
--- a/drivers/gpu/drm/i915/intel_acpi.c
+++ b/drivers/gpu/drm/i915/intel_acpi.c
@@ -190,37 +190,6 @@ out:
 	kfree(output.pointer);
 }
 
-static int intel_dsm_switchto(enum vga_switcheroo_client_id id)
-{
-	return 0;
-}
-
-static int intel_dsm_power_state(enum vga_switcheroo_client_id id,
-				 enum vga_switcheroo_state state)
-{
-	return 0;
-}
-
-static int intel_dsm_init(void)
-{
-	return 0;
-}
-
-static int intel_dsm_get_client_id(struct pci_dev *pdev)
-{
-	if (intel_dsm_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev))
-		return VGA_SWITCHEROO_IGD;
-	else
-		return VGA_SWITCHEROO_DIS;
-}
-
-static struct vga_switcheroo_handler intel_dsm_handler = {
-	.switchto = intel_dsm_switchto,
-	.power_state = intel_dsm_power_state,
-	.init = intel_dsm_init,
-	.get_client_id = intel_dsm_get_client_id,
-};
-
 static bool intel_dsm_pci_probe(struct pci_dev *pdev)
 {
 	acpi_handle dhandle, intel_handle;
@@ -276,11 +245,8 @@ void intel_register_dsm_handler(void)
 {
 	if (!intel_dsm_detect())
 		return;
-
-	vga_switcheroo_register_handler(&intel_dsm_handler);
 }
 
 void intel_unregister_dsm_handler(void)
 {
-	vga_switcheroo_unregister_handler();
 }
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index c55c7704335..8df57431606 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -34,6 +34,25 @@
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+/* Here's the desired hotplug mode */
+#define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |		\
+			   ADPA_CRT_HOTPLUG_WARMUP_10MS |		\
+			   ADPA_CRT_HOTPLUG_SAMPLE_4S |			\
+			   ADPA_CRT_HOTPLUG_VOLTAGE_50 |		\
+			   ADPA_CRT_HOTPLUG_VOLREF_325MV |		\
+			   ADPA_CRT_HOTPLUG_ENABLE)
+
+struct intel_crt {
+	struct intel_encoder base;
+	bool force_hotplug_required;
+};
+
+static struct intel_crt *intel_attached_crt(struct drm_connector *connector)
+{
+	return container_of(intel_attached_encoder(connector),
+			    struct intel_crt, base);
+}
+
 static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
@@ -129,7 +148,7 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 			   dpll_md & ~DPLL_MD_UDI_MULTIPLIER_MASK);
 	}
 
-	adpa = 0;
+	adpa = ADPA_HOTPLUG_BITS;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
@@ -157,53 +176,44 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
+	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 adpa, temp;
+	u32 adpa;
 	bool ret;
-	bool turn_off_dac = false;
 
-	temp = adpa = I915_READ(PCH_ADPA);
+	/* The first time through, trigger an explicit detection cycle */
+	if (crt->force_hotplug_required) {
+		bool turn_off_dac = HAS_PCH_SPLIT(dev);
+		u32 save_adpa;
 
-	if (HAS_PCH_SPLIT(dev))
-		turn_off_dac = true;
-
-	adpa &= ~ADPA_CRT_HOTPLUG_MASK;
-	if (turn_off_dac)
-		adpa &= ~ADPA_DAC_ENABLE;
-
-	/* disable HPD first */
-	I915_WRITE(PCH_ADPA, adpa);
-	(void)I915_READ(PCH_ADPA);
-
-	adpa |= (ADPA_CRT_HOTPLUG_PERIOD_128 |
-			ADPA_CRT_HOTPLUG_WARMUP_10MS |
-			ADPA_CRT_HOTPLUG_SAMPLE_4S |
-			ADPA_CRT_HOTPLUG_VOLTAGE_50 | /* default */
-			ADPA_CRT_HOTPLUG_VOLREF_325MV |
-			ADPA_CRT_HOTPLUG_ENABLE |
-			ADPA_CRT_HOTPLUG_FORCE_TRIGGER);
-
-	DRM_DEBUG_KMS("pch crt adpa 0x%x", adpa);
-	I915_WRITE(PCH_ADPA, adpa);
-
-	if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
-		     1000))
-		DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
-
-	if (turn_off_dac) {
-		/* Make sure hotplug is enabled */
-		I915_WRITE(PCH_ADPA, temp | ADPA_CRT_HOTPLUG_ENABLE);
-		(void)I915_READ(PCH_ADPA);
+		crt->force_hotplug_required = 0;
+
+		save_adpa = adpa = I915_READ(PCH_ADPA);
+		DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
+
+		adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
+		if (turn_off_dac)
+			adpa &= ~ADPA_DAC_ENABLE;
+
+		I915_WRITE(PCH_ADPA, adpa);
+
+		if (wait_for((I915_READ(PCH_ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+			     1000))
+			DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+
+		if (turn_off_dac) {
+			I915_WRITE(PCH_ADPA, save_adpa);
+			POSTING_READ(PCH_ADPA);
+		}
 	}
 
 	/* Check the status to see if both blue and green are on now */
 	adpa = I915_READ(PCH_ADPA);
-	adpa &= ADPA_CRT_HOTPLUG_MONITOR_MASK;
-	if ((adpa == ADPA_CRT_HOTPLUG_MONITOR_COLOR) ||
-		(adpa == ADPA_CRT_HOTPLUG_MONITOR_MONO))
+	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 		ret = true;
 	else
 		ret = false;
+	DRM_DEBUG_KMS("ironlake hotplug adpa=0x%x, result %d\n", adpa, ret);
 
 	return ret;
 }
@@ -277,13 +287,12 @@ static bool intel_crt_ddc_probe(struct drm_i915_private *dev_priv, int ddc_bus)
 	return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 1) == 1;
 }
 
-static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
+static bool intel_crt_detect_ddc(struct intel_crt *crt)
 {
-	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
-	struct drm_i915_private *dev_priv = encoder->dev->dev_private;
+	struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
 
 	/* CRT should always be at 0, but check anyway */
-	if (intel_encoder->type != INTEL_OUTPUT_ANALOG)
+	if (crt->base.type != INTEL_OUTPUT_ANALOG)
 		return false;
 
 	if (intel_crt_ddc_probe(dev_priv, dev_priv->crt_ddc_pin)) {
@@ -291,7 +300,7 @@ static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
 		return true;
 	}
 
-	if (intel_ddc_probe(intel_encoder, dev_priv->crt_ddc_pin)) {
+	if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
 		DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
 		return true;
 	}
@@ -300,9 +309,9 @@ static bool intel_crt_detect_ddc(struct drm_encoder *encoder)
 }
 
 static enum drm_connector_status
-intel_crt_load_detect(struct drm_crtc *crtc, struct intel_encoder *intel_encoder)
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_crt *crt)
 {
-	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_encoder *encoder = &crt->base.base;
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -434,7 +443,7 @@ static enum drm_connector_status
 intel_crt_detect(struct drm_connector *connector, bool force)
 {
 	struct drm_device *dev = connector->dev;
-	struct intel_encoder *encoder = intel_attached_encoder(connector);
+	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_crtc *crtc;
 	int dpms_mode;
 	enum drm_connector_status status;
@@ -443,28 +452,31 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 		if (intel_crt_detect_hotplug(connector)) {
 			DRM_DEBUG_KMS("CRT detected via hotplug\n");
 			return connector_status_connected;
-		} else
+		} else {
+			DRM_DEBUG_KMS("CRT not detected via hotplug\n");
 			return connector_status_disconnected;
+		}
 	}
 
-	if (intel_crt_detect_ddc(&encoder->base))
+	if (intel_crt_detect_ddc(crt))
 		return connector_status_connected;
 
 	if (!force)
 		return connector->status;
 
 	/* for pre-945g platforms use load detect */
-	if (encoder->base.crtc && encoder->base.crtc->enabled) {
-		status = intel_crt_load_detect(encoder->base.crtc, encoder);
+	crtc = crt->base.base.crtc;
+	if (crtc && crtc->enabled) {
+		status = intel_crt_load_detect(crtc, crt);
 	} else {
-		crtc = intel_get_load_detect_pipe(encoder, connector,
+		crtc = intel_get_load_detect_pipe(&crt->base, connector,
 						  NULL, &dpms_mode);
 		if (crtc) {
-			if (intel_crt_detect_ddc(&encoder->base))
+			if (intel_crt_detect_ddc(crt))
 				status = connector_status_connected;
 			else
-				status = intel_crt_load_detect(crtc, encoder);
-			intel_release_load_detect_pipe(encoder,
+				status = intel_crt_load_detect(crtc, crt);
+			intel_release_load_detect_pipe(&crt->base,
 						       connector, dpms_mode);
 		} else
 			status = connector_status_unknown;
@@ -536,17 +548,17 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = {
 void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
-	struct intel_encoder *intel_encoder;
+	struct intel_crt *crt;
 	struct intel_connector *intel_connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
-	intel_encoder = kzalloc(sizeof(struct intel_encoder), GFP_KERNEL);
-	if (!intel_encoder)
+	crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
+	if (!crt)
 		return;
 
 	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
 	if (!intel_connector) {
-		kfree(intel_encoder);
+		kfree(crt);
 		return;
 	}
 
@@ -554,20 +566,20 @@ void intel_crt_init(struct drm_device *dev)
 	drm_connector_init(dev, &intel_connector->base,
 			   &intel_crt_connector_funcs, DRM_MODE_CONNECTOR_VGA);
 
-	drm_encoder_init(dev, &intel_encoder->base, &intel_crt_enc_funcs,
+	drm_encoder_init(dev, &crt->base.base, &intel_crt_enc_funcs,
 			 DRM_MODE_ENCODER_DAC);
 
-	intel_connector_attach_encoder(intel_connector, intel_encoder);
+	intel_connector_attach_encoder(intel_connector, &crt->base);
 
-	intel_encoder->type = INTEL_OUTPUT_ANALOG;
-	intel_encoder->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
-				   (1 << INTEL_ANALOG_CLONE_BIT) |
-				   (1 << INTEL_SDVO_LVDS_CLONE_BIT);
-	intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+	crt->base.type = INTEL_OUTPUT_ANALOG;
+	crt->base.clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT |
+				1 << INTEL_ANALOG_CLONE_BIT |
+				1 << INTEL_SDVO_LVDS_CLONE_BIT);
+	crt->base.crtc_mask = (1 << 0) | (1 << 1);
 	connector->interlace_allowed = 1;
 	connector->doublescan_allowed = 0;
 
-	drm_encoder_helper_add(&intel_encoder->base, &intel_crt_helper_funcs);
+	drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
 	drm_sysfs_connector_add(connector);
@@ -577,5 +589,22 @@ void intel_crt_init(struct drm_device *dev)
 	else
 		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
+	/*
+	 * Configure the automatic hotplug detection stuff
+	 */
+	crt->force_hotplug_required = 0;
+	if (HAS_PCH_SPLIT(dev)) {
+		u32 adpa;
+
+		adpa = I915_READ(PCH_ADPA);
+		adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+		adpa |= ADPA_HOTPLUG_BITS;
+		I915_WRITE(PCH_ADPA, adpa);
+		POSTING_READ(PCH_ADPA);
+
+		DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
+		crt->force_hotplug_required = 1;
+	}
+
 	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
 }
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 990f065374b..fca523288ac 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1611,6 +1611,18 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
 
 		wait_event(dev_priv->pending_flip_queue,
 			   atomic_read(&obj_priv->pending_flip) == 0);
+
+		/* Big Hammer, we also need to ensure that any pending
+		 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
+		 * current scanout is retired before unpinning the old
+		 * framebuffer.
+		 */
+		ret = i915_gem_object_flush_gpu(obj_priv, false);
+		if (ret) {
+			i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
+			mutex_unlock(&dev->struct_mutex);
+			return ret;
+		}
 	}
 
 	ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
@@ -1681,6 +1693,37 @@ static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
 	udelay(500);
 }
 
+static void intel_fdi_normal_train(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	u32 reg, temp;
+
+	/* enable normal train */
+	reg = FDI_TX_CTL(pipe);
+	temp = I915_READ(reg);
+	temp &= ~FDI_LINK_TRAIN_NONE;
+	temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
+	I915_WRITE(reg, temp);
+
+	reg = FDI_RX_CTL(pipe);
+	temp = I915_READ(reg);
+	if (HAS_PCH_CPT(dev)) {
+		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+		temp |= FDI_LINK_TRAIN_NORMAL_CPT;
+	} else {
+		temp &= ~FDI_LINK_TRAIN_NONE;
+		temp |= FDI_LINK_TRAIN_NONE;
+	}
+	I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
+
+	/* wait one idle pattern time */
+	POSTING_READ(reg);
+	udelay(1000);
+}
+
 /* The FDI link training functions for ILK/Ibexpeak. */
 static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 {
@@ -1767,27 +1810,6 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc)
 
 	DRM_DEBUG_KMS("FDI train done\n");
 
-	/* enable normal train */
-	reg = FDI_TX_CTL(pipe);
-	temp = I915_READ(reg);
-	temp &= ~FDI_LINK_TRAIN_NONE;
-	temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
-	I915_WRITE(reg, temp);
-
-	reg = FDI_RX_CTL(pipe);
-	temp = I915_READ(reg);
-	if (HAS_PCH_CPT(dev)) {
-		temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
-		temp |= FDI_LINK_TRAIN_NORMAL_CPT;
-	} else {
-		temp &= ~FDI_LINK_TRAIN_NONE;
-		temp |= FDI_LINK_TRAIN_NONE;
-	}
-	I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
-
-	/* wait one idle pattern time */
-	POSTING_READ(reg);
-	udelay(1000);
 }
 
 static const int const snb_b_fdi_train_param [] = {
@@ -2090,15 +2112,19 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
 	I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe)));
 	I915_WRITE(TRANS_VSYNC(pipe),  I915_READ(VSYNC(pipe)));
 
+	intel_fdi_normal_train(crtc);
+
 	/* For PCH DP, enable TRANS_DP_CTL */
 	if (HAS_PCH_CPT(dev) &&
 	    intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
 		reg = TRANS_DP_CTL(pipe);
 		temp = I915_READ(reg);
 		temp &= ~(TRANS_DP_PORT_SEL_MASK |
-			  TRANS_DP_SYNC_MASK);
+			  TRANS_DP_SYNC_MASK |
+			  TRANS_DP_BPC_MASK);
 		temp |= (TRANS_DP_OUTPUT_ENABLE |
 			 TRANS_DP_ENH_FRAMING);
+		temp |= TRANS_DP_8BPC;
 
 		if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
 			temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
@@ -2200,9 +2226,10 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
 	udelay(100);
 
 	/* Ironlake workaround, disable clock pointer after downing FDI */
-	I915_WRITE(FDI_RX_CHICKEN(pipe),
-		   I915_READ(FDI_RX_CHICKEN(pipe) &
-			     ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
+	if (HAS_PCH_IBX(dev))
+		I915_WRITE(FDI_RX_CHICKEN(pipe),
+			   I915_READ(FDI_RX_CHICKEN(pipe) &
+				     ~FDI_RX_PHASE_SYNC_POINTER_ENABLE));
 
 	/* still set train pattern 1 */
 	reg = FDI_TX_CTL(pipe);
@@ -2687,27 +2714,19 @@ fdi_reduce_ratio(u32 *num, u32 *den)
 	}
 }
 
-#define DATA_N 0x800000
-#define LINK_N 0x80000
-
 static void
 ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
 		     int link_clock, struct fdi_m_n *m_n)
 {
-	u64 temp;
-
 	m_n->tu = 64; /* default size */
 
-	temp = (u64) DATA_N * pixel_clock;
-	temp = div_u64(temp, link_clock);
-	m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
-	m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
-	m_n->gmch_n = DATA_N;
+	/* BUG_ON(pixel_clock > INT_MAX / 36); */
+	m_n->gmch_m = bits_per_pixel * pixel_clock;
+	m_n->gmch_n = link_clock * nlanes * 8;
 	fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
 
-	temp = (u64) LINK_N * pixel_clock;
-	m_n->link_m = div_u64(temp, link_clock);
-	m_n->link_n = LINK_N;
+	m_n->link_m = pixel_clock;
+	m_n->link_n = link_clock;
 	fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
 }
 
@@ -3691,6 +3710,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 	/* FDI link */
 	if (HAS_PCH_SPLIT(dev)) {
+		int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
 		int lane = 0, link_bw, bpp;
 		/* CPU eDP doesn't require FDI link, so just set DP M/N
 		   according to current link config */
@@ -3774,6 +3794,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc,
 
 		intel_crtc->fdi_lanes = lane;
 
+		if (pixel_multiplier > 1)
+			link_bw *= pixel_multiplier;
 		ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
 	}
 
@@ -5211,6 +5233,55 @@ static const struct drm_crtc_funcs intel_crtc_funcs = {
 	.page_flip = intel_crtc_page_flip,
 };
 
+static void intel_sanitize_modesetting(struct drm_device *dev,
+				       int pipe, int plane)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 reg, val;
+
+	if (HAS_PCH_SPLIT(dev))
+		return;
+
+	/* Who knows what state these registers were left in by the BIOS or
+	 * grub?
+	 *
+	 * If we leave the registers in a conflicting state (e.g. with the
+	 * display plane reading from the other pipe than the one we intend
+	 * to use) then when we attempt to teardown the active mode, we will
+	 * not disable the pipes and planes in the correct order -- leaving
+	 * a plane reading from a disabled pipe and possibly leading to
+	 * undefined behaviour.
+	 */
+
+	reg = DSPCNTR(plane);
+	val = I915_READ(reg);
+
+	if ((val & DISPLAY_PLANE_ENABLE) == 0)
+		return;
+	if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
+		return;
+
+	/* This display plane is active and attached to the other CPU pipe. */
+	pipe = !pipe;
+
+	/* Disable the plane and wait for it to stop reading from the pipe. */
+	I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
+	intel_flush_display_plane(dev, plane);
+
+	if (IS_GEN2(dev))
+		intel_wait_for_vblank(dev, pipe);
+
+	if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+		return;
+
+	/* Switch off the pipe. */
+	reg = PIPECONF(pipe);
+	val = I915_READ(reg);
+	if (val & PIPECONF_ENABLE) {
+		I915_WRITE(reg, val & ~PIPECONF_ENABLE);
+		intel_wait_for_pipe_off(dev, pipe);
+	}
+}
 
 static void intel_crtc_init(struct drm_device *dev, int pipe)
 {
@@ -5262,6 +5333,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
 
 	setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
 		    (unsigned long)intel_crtc);
+
+	intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
 }
 
 int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
@@ -5306,19 +5379,41 @@ static int intel_encoder_clones(struct drm_device *dev, int type_mask)
 	return index_mask;
 }
 
+static bool has_edp_a(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	if (!IS_MOBILE(dev))
+		return false;
+
+	if ((I915_READ(DP_A) & DP_DETECTED) == 0)
+		return false;
+
+	if (IS_GEN5(dev) &&
+	    (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE))
+		return false;
+
+	return true;
+}
+
 static void intel_setup_outputs(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_encoder *encoder;
 	bool dpd_is_edp = false;
+	bool has_lvds = false;
 
 	if (IS_MOBILE(dev) && !IS_I830(dev))
-		intel_lvds_init(dev);
+		has_lvds = intel_lvds_init(dev);
+	if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
+		/* disable the panel fitter on everything but LVDS */
+		I915_WRITE(PFIT_CONTROL, 0);
+	}
 
 	if (HAS_PCH_SPLIT(dev)) {
 		dpd_is_edp = intel_dpd_is_edp(dev);
 
-		if (IS_MOBILE(dev) && (I915_READ(DP_A) & DP_DETECTED))
+		if (has_edp_a(dev))
 			intel_dp_init(dev, DP_A);
 
 		if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED))
@@ -5581,20 +5676,19 @@ void ironlake_enable_drps(struct drm_device *dev)
 	fmin = (rgvmodectl & MEMMODE_FMIN_MASK);
 	fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >>
 		MEMMODE_FSTART_SHIFT;
-	fstart = fmax;
 
 	vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >>
 		PXVFREQ_PX_SHIFT;
 
-	dev_priv->fmax = fstart; /* IPS callback will increase this */
+	dev_priv->fmax = fmax; /* IPS callback will increase this */
 	dev_priv->fstart = fstart;
 
-	dev_priv->max_delay = fmax;
+	dev_priv->max_delay = fstart;
 	dev_priv->min_delay = fmin;
 	dev_priv->cur_delay = fstart;
 
-	DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin,
-			 fstart);
+	DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n",
+			 fmax, fmin, fstart);
 
 	I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN);
 
@@ -5748,6 +5842,8 @@ void intel_init_clock_gating(struct drm_device *dev)
 			I915_WRITE(PCH_3DCGDIS0,
 				   MARIUNIT_CLOCK_GATE_DISABLE |
 				   SVSMUNIT_CLOCK_GATE_DISABLE);
+			I915_WRITE(PCH_3DCGDIS1,
+				   VFMUNIT_CLOCK_GATE_DISABLE);
 		}
 
 		I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate);
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 891f4f1d63b..864417cffe9 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -479,6 +479,7 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
 	uint16_t address = algo_data->address;
 	uint8_t msg[5];
 	uint8_t reply[2];
+	unsigned retry;
 	int msg_bytes;
 	int reply_bytes;
 	int ret;
@@ -513,14 +514,33 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
 		break;
 	}
 
-	for (;;) {
-	  ret = intel_dp_aux_ch(intel_dp,
-				msg, msg_bytes,
-				reply, reply_bytes);
+	for (retry = 0; retry < 5; retry++) {
+		ret = intel_dp_aux_ch(intel_dp,
+				      msg, msg_bytes,
+				      reply, reply_bytes);
 		if (ret < 0) {
 			DRM_DEBUG_KMS("aux_ch failed %d\n", ret);
 			return ret;
 		}
+
+		switch (reply[0] & AUX_NATIVE_REPLY_MASK) {
+		case AUX_NATIVE_REPLY_ACK:
+			/* I2C-over-AUX Reply field is only valid
+			 * when paired with AUX ACK.
+			 */
+			break;
+		case AUX_NATIVE_REPLY_NACK:
+			DRM_DEBUG_KMS("aux_ch native nack\n");
+			return -EREMOTEIO;
+		case AUX_NATIVE_REPLY_DEFER:
+			udelay(100);
+			continue;
+		default:
+			DRM_ERROR("aux_ch invalid native reply 0x%02x\n",
+				  reply[0]);
+			return -EREMOTEIO;
+		}
+
 		switch (reply[0] & AUX_I2C_REPLY_MASK) {
 		case AUX_I2C_REPLY_ACK:
 			if (mode == MODE_I2C_READ) {
@@ -528,17 +548,20 @@ intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode,
 			}
 			return reply_bytes - 1;
 		case AUX_I2C_REPLY_NACK:
-			DRM_DEBUG_KMS("aux_ch nack\n");
+			DRM_DEBUG_KMS("aux_i2c nack\n");
 			return -EREMOTEIO;
 		case AUX_I2C_REPLY_DEFER:
-			DRM_DEBUG_KMS("aux_ch defer\n");
+			DRM_DEBUG_KMS("aux_i2c defer\n");
 			udelay(100);
 			break;
 		default:
-			DRM_ERROR("aux_ch invalid reply 0x%02x\n", reply[0]);
+			DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]);
 			return -EREMOTEIO;
 		}
 	}
+
+	DRM_ERROR("too many retries, giving up\n");
+	return -EREMOTEIO;
 }
 
 static int
@@ -584,17 +607,6 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		mode->clock = dev_priv->panel_fixed_mode->clock;
 	}
 
-	/* Just use VBT values for eDP */
-	if (is_edp(intel_dp)) {
-		intel_dp->lane_count = dev_priv->edp.lanes;
-		intel_dp->link_bw = dev_priv->edp.rate;
-		adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
-		DRM_DEBUG_KMS("eDP link bw %02x lane count %d clock %d\n",
-			      intel_dp->link_bw, intel_dp->lane_count,
-			      adjusted_mode->clock);
-		return true;
-	}
-
 	for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
 		for (clock = 0; clock <= max_clock; clock++) {
 			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
@@ -613,6 +625,19 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		}
 	}
 
+	if (is_edp(intel_dp)) {
+		/* okay we failed just pick the highest */
+		intel_dp->lane_count = max_lane_count;
+		intel_dp->link_bw = bws[max_clock];
+		adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
+		DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
+			      "count %d clock %d\n",
+			      intel_dp->link_bw, intel_dp->lane_count,
+			      adjusted_mode->clock);
+
+		return true;
+	}
+
 	return false;
 }
 
@@ -1087,21 +1112,11 @@ intel_get_adjust_train(struct intel_dp *intel_dp)
 }
 
 static uint32_t
-intel_dp_signal_levels(struct intel_dp *intel_dp)
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
 {
-	struct drm_device *dev = intel_dp->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t signal_levels = 0;
-	u8 train_set = intel_dp->train_set[0];
-	u32 vswing = train_set & DP_TRAIN_VOLTAGE_SWING_MASK;
-	u32 preemphasis = train_set & DP_TRAIN_PRE_EMPHASIS_MASK;
-
-	if (is_edp(intel_dp)) {
-		vswing = dev_priv->edp.vswing;
-		preemphasis = dev_priv->edp.preemphasis;
-	}
+	uint32_t	signal_levels = 0;
 
-	switch (vswing) {
+	switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
 	case DP_TRAIN_VOLTAGE_SWING_400:
 	default:
 		signal_levels |= DP_VOLTAGE_0_4;
@@ -1116,7 +1131,7 @@ intel_dp_signal_levels(struct intel_dp *intel_dp)
 		signal_levels |= DP_VOLTAGE_1_2;
 		break;
 	}
-	switch (preemphasis) {
+	switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
 	case DP_TRAIN_PRE_EMPHASIS_0:
 	default:
 		signal_levels |= DP_PRE_EMPHASIS_0;
@@ -1203,18 +1218,6 @@ intel_channel_eq_ok(struct intel_dp *intel_dp)
 }
 
 static bool
-intel_dp_aux_handshake_required(struct intel_dp *intel_dp)
-{
-	struct drm_device *dev = intel_dp->base.base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	if (is_edp(intel_dp) && dev_priv->no_aux_handshake)
-		return false;
-
-	return true;
-}
-
-static bool
 intel_dp_set_link_train(struct intel_dp *intel_dp,
 			uint32_t dp_reg_value,
 			uint8_t dp_train_pat)
@@ -1226,9 +1229,6 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
 	I915_WRITE(intel_dp->output_reg, dp_reg_value);
 	POSTING_READ(intel_dp->output_reg);
 
-	if (!intel_dp_aux_handshake_required(intel_dp))
-		return true;
-
 	intel_dp_aux_native_write_1(intel_dp,
 				    DP_TRAINING_PATTERN_SET,
 				    dp_train_pat);
@@ -1261,11 +1261,10 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 	POSTING_READ(intel_dp->output_reg);
 	intel_wait_for_vblank(dev, intel_crtc->pipe);
 
-	if (intel_dp_aux_handshake_required(intel_dp))
-		/* Write the link configuration data */
-		intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
-					  intel_dp->link_configuration,
-					  DP_LINK_CONFIGURATION_SIZE);
+	/* Write the link configuration data */
+	intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
+				  intel_dp->link_configuration,
+				  DP_LINK_CONFIGURATION_SIZE);
 
 	DP |= DP_PORT_EN;
 	if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
@@ -1283,7 +1282,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
 		} else {
-			signal_levels = intel_dp_signal_levels(intel_dp);
+			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
 			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
 		}
 
@@ -1297,37 +1296,33 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 			break;
 		/* Set training pattern 1 */
 
-		udelay(500);
-		if (intel_dp_aux_handshake_required(intel_dp)) {
+		udelay(100);
+		if (!intel_dp_get_link_status(intel_dp))
 			break;
-		} else {
-			if (!intel_dp_get_link_status(intel_dp))
-				break;
 
-			if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
-				clock_recovery = true;
-				break;
-			}
+		if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+			clock_recovery = true;
+			break;
+		}
 
-			/* Check to see if we've tried the max voltage */
-			for (i = 0; i < intel_dp->lane_count; i++)
-				if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
-					break;
-			if (i == intel_dp->lane_count)
+		/* Check to see if we've tried the max voltage */
+		for (i = 0; i < intel_dp->lane_count; i++)
+			if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
 				break;
+		if (i == intel_dp->lane_count)
+			break;
 
-			/* Check to see if we've tried the same voltage 5 times */
-			if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
-				++tries;
-				if (tries == 5)
-					break;
-			} else
-				tries = 0;
-			voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
+		/* Check to see if we've tried the same voltage 5 times */
+		if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+			++tries;
+			if (tries == 5)
+				break;
+		} else
+			tries = 0;
+		voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
 
-			/* Compute new intel_dp->train_set as requested by target */
-			intel_get_adjust_train(intel_dp);
-		}
+		/* Compute new intel_dp->train_set as requested by target */
+		intel_get_adjust_train(intel_dp);
 	}
 
 	intel_dp->DP = DP;
@@ -1354,7 +1349,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
 		} else {
-			signal_levels = intel_dp_signal_levels(intel_dp);
+			signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
 			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
 		}
 
@@ -1368,28 +1363,24 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 					     DP_TRAINING_PATTERN_2))
 			break;
 
-		udelay(500);
-
-		if (!intel_dp_aux_handshake_required(intel_dp)) {
+		udelay(400);
+		if (!intel_dp_get_link_status(intel_dp))
 			break;
-		} else {
-			if (!intel_dp_get_link_status(intel_dp))
-				break;
 
-			if (intel_channel_eq_ok(intel_dp)) {
-				channel_eq = true;
-				break;
-			}
+		if (intel_channel_eq_ok(intel_dp)) {
+			channel_eq = true;
+			break;
+		}
 
-			/* Try 5 times */
-			if (tries > 5)
-				break;
+		/* Try 5 times */
+		if (tries > 5)
+			break;
 
-			/* Compute new intel_dp->train_set as requested by target */
-			intel_get_adjust_train(intel_dp);
-			++tries;
-		}
+		/* Compute new intel_dp->train_set as requested by target */
+		intel_get_adjust_train(intel_dp);
+		++tries;
 	}
+
 	if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
 		reg = DP | DP_LINK_TRAIN_OFF_CPT;
 	else
@@ -1408,6 +1399,9 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	uint32_t DP = intel_dp->DP;
 
+	if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
+		return;
+
 	DRM_DEBUG_KMS("\n");
 
 	if (is_edp(intel_dp)) {
@@ -1430,6 +1424,28 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 
 	if (is_edp(intel_dp))
 		DP |= DP_LINK_TRAIN_OFF;
+
+	if (!HAS_PCH_CPT(dev) &&
+	    I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
+		struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+		/* Hardware workaround: leaving our transcoder select
+		 * set to transcoder B while it's off will prevent the
+		 * corresponding HDMI output on transcoder A.
+		 *
+		 * Combine this with another hardware workaround:
+		 * transcoder select bit can only be cleared while the
+		 * port is enabled.
+		 */
+		DP &= ~DP_PIPEB_SELECT;
+		I915_WRITE(intel_dp->output_reg, DP);
+
+		/* Changes to enable or select take place the vblank
+		 * after being written.
+		 */
+		intel_wait_for_vblank(intel_dp->base.base.dev,
+				      intel_crtc->pipe);
+	}
+
 	I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
 	POSTING_READ(intel_dp->output_reg);
 }
@@ -1517,7 +1533,7 @@ g4x_dp_detect(struct intel_dp *intel_dp)
 			status = connector_status_connected;
 	}
 
-	return bit;
+	return status;
 }
 
 /**
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 9af9f86a876..e52c6125bb1 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -237,7 +237,7 @@ extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
 extern void intel_dvo_init(struct drm_device *dev);
 extern void intel_tv_init(struct drm_device *dev);
 extern void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj);
-extern void intel_lvds_init(struct drm_device *dev);
+extern bool intel_lvds_init(struct drm_device *dev);
 extern void intel_dp_init(struct drm_device *dev, int dp_reg);
 void
 intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
@@ -296,6 +296,7 @@ extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
 extern void intel_init_clock_gating(struct drm_device *dev);
 extern void ironlake_enable_drps(struct drm_device *dev);
 extern void ironlake_disable_drps(struct drm_device *dev);
+extern void intel_init_emon(struct drm_device *dev);
 
 extern int intel_pin_and_fence_fb_obj(struct drm_device *dev,
 				      struct drm_gem_object *obj,
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 2be4f728ed0..3dba086e7ee 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -160,7 +160,7 @@ intel_gpio_create(struct drm_i915_private *dev_priv, u32 pin)
 	};
 	struct intel_gpio *gpio;
 
-	if (pin < 1 || pin > 7)
+	if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin])
 		return NULL;
 
 	gpio = kzalloc(sizeof(struct intel_gpio), GFP_KERNEL);
@@ -172,7 +172,8 @@ intel_gpio_create(struct drm_i915_private *dev_priv, u32 pin)
 		gpio->reg += PCH_GPIOA - GPIOA;
 	gpio->dev_priv = dev_priv;
 
-	snprintf(gpio->adapter.name, I2C_NAME_SIZE, "GPIO%c", "?BACDEF?"[pin]);
+	snprintf(gpio->adapter.name, sizeof(gpio->adapter.name),
+		 "i915 GPIO%c", "?BACDE?F"[pin]);
 	gpio->adapter.owner = THIS_MODULE;
 	gpio->adapter.algo_data	= &gpio->algo;
 	gpio->adapter.dev.parent = &dev_priv->dev->pdev->dev;
@@ -349,7 +350,7 @@ int intel_setup_gmbus(struct drm_device *dev)
 		"panel",
 		"dpc",
 		"dpb",
-		"reserved"
+		"reserved",
 		"dpd",
 	};
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -366,8 +367,8 @@ int intel_setup_gmbus(struct drm_device *dev)
 		bus->adapter.owner = THIS_MODULE;
 		bus->adapter.class = I2C_CLASS_DDC;
 		snprintf(bus->adapter.name,
-			 I2C_NAME_SIZE,
-			 "gmbus %s",
+			 sizeof(bus->adapter.name),
+			 "i915 gmbus %s",
 			 names[i]);
 
 		bus->adapter.dev.parent = &dev->pdev->dev;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index f1a649990ea..25bcedf386f 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -68,7 +68,7 @@ static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector)
 /**
  * Sets the power state for the panel.
  */
-static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on)
+static void intel_lvds_enable(struct intel_lvds *intel_lvds)
 {
 	struct drm_device *dev = intel_lvds->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -82,26 +82,61 @@ static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on)
 		lvds_reg = LVDS;
 	}
 
-	if (on) {
-		I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
-		I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
-		intel_panel_set_backlight(dev, dev_priv->backlight_level);
-	} else {
-		dev_priv->backlight_level = intel_panel_get_backlight(dev);
-
-		intel_panel_set_backlight(dev, 0);
-		I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+	I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
 
-		if (intel_lvds->pfit_control) {
-			if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
-				DRM_ERROR("timed out waiting for panel to power off\n");
-			I915_WRITE(PFIT_CONTROL, 0);
-			intel_lvds->pfit_control = 0;
+	if (intel_lvds->pfit_dirty) {
+		/*
+		 * Enable automatic panel scaling so that non-native modes
+		 * fill the screen.  The panel fitter should only be
+		 * adjusted whilst the pipe is disabled, according to
+		 * register description and PRM.
+		 */
+		DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+			      intel_lvds->pfit_control,
+			      intel_lvds->pfit_pgm_ratios);
+		if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) {
+			DRM_ERROR("timed out waiting for panel to power off\n");
+		} else {
+			I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
+			I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
 			intel_lvds->pfit_dirty = false;
 		}
+	}
+
+	I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+	POSTING_READ(lvds_reg);
+
+	intel_panel_set_backlight(dev, dev_priv->backlight_level);
+}
+
+static void intel_lvds_disable(struct intel_lvds *intel_lvds)
+{
+	struct drm_device *dev = intel_lvds->base.base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 ctl_reg, lvds_reg;
+
+	if (HAS_PCH_SPLIT(dev)) {
+		ctl_reg = PCH_PP_CONTROL;
+		lvds_reg = PCH_LVDS;
+	} else {
+		ctl_reg = PP_CONTROL;
+		lvds_reg = LVDS;
+	}
+
+	dev_priv->backlight_level = intel_panel_get_backlight(dev);
+	intel_panel_set_backlight(dev, 0);
 
-		I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
+	I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+
+	if (intel_lvds->pfit_control) {
+		if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
+			DRM_ERROR("timed out waiting for panel to power off\n");
+
+		I915_WRITE(PFIT_CONTROL, 0);
+		intel_lvds->pfit_dirty = true;
 	}
+
+	I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
 	POSTING_READ(lvds_reg);
 }
 
@@ -110,9 +145,9 @@ static void intel_lvds_dpms(struct drm_encoder *encoder, int mode)
 	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
 
 	if (mode == DRM_MODE_DPMS_ON)
-		intel_lvds_set_power(intel_lvds, true);
+		intel_lvds_enable(intel_lvds);
 	else
-		intel_lvds_set_power(intel_lvds, false);
+		intel_lvds_disable(intel_lvds);
 
 	/* XXX: We never power down the LVDS pairs. */
 }
@@ -411,43 +446,18 @@ static void intel_lvds_commit(struct drm_encoder *encoder)
 	/* Always do a full power on as we do not know what state
 	 * we were left in.
 	 */
-	intel_lvds_set_power(intel_lvds, true);
+	intel_lvds_enable(intel_lvds);
 }
 
 static void intel_lvds_mode_set(struct drm_encoder *encoder,
 				struct drm_display_mode *mode,
 				struct drm_display_mode *adjusted_mode)
 {
-	struct drm_device *dev = encoder->dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-
 	/*
 	 * The LVDS pin pair will already have been turned on in the
 	 * intel_crtc_mode_set since it has a large impact on the DPLL
 	 * settings.
 	 */
-
-	if (HAS_PCH_SPLIT(dev))
-		return;
-
-	if (!intel_lvds->pfit_dirty)
-		return;
-
-	/*
-	 * Enable automatic panel scaling so that non-native modes fill the
-	 * screen.  Should be enabled before the pipe is enabled, according to
-	 * register description and PRM.
-	 */
-	DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
-		      intel_lvds->pfit_control,
-		      intel_lvds->pfit_pgm_ratios);
-	if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
-		DRM_ERROR("timed out waiting for panel to power off\n");
-
-	I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
-	I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
-	intel_lvds->pfit_dirty = false;
 }
 
 /**
@@ -481,11 +491,8 @@ static int intel_lvds_get_modes(struct drm_connector *connector)
 	struct drm_device *dev = connector->dev;
 	struct drm_display_mode *mode;
 
-	if (intel_lvds->edid) {
-		drm_mode_connector_update_edid_property(connector,
-							intel_lvds->edid);
+	if (intel_lvds->edid)
 		return drm_add_edid_modes(connector, intel_lvds->edid);
-	}
 
 	mode = drm_mode_duplicate(dev, intel_lvds->fixed_mode);
 	if (mode == 0)
@@ -840,7 +847,7 @@ static bool intel_lvds_ddc_probe(struct drm_device *dev, u8 pin)
  * Create the connector, register the LVDS DDC bus, and try to figure out what
  * modes we can display on the LVDS panel (if present).
  */
-void intel_lvds_init(struct drm_device *dev)
+bool intel_lvds_init(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_lvds *intel_lvds;
@@ -856,37 +863,37 @@ void intel_lvds_init(struct drm_device *dev)
 
 	/* Skip init on machines we know falsely report LVDS */
 	if (dmi_check_system(intel_no_lvds))
-		return;
+		return false;
 
 	pin = GMBUS_PORT_PANEL;
 	if (!lvds_is_present_in_vbt(dev, &pin)) {
 		DRM_DEBUG_KMS("LVDS is not present in VBT\n");
-		return;
+		return false;
 	}
 
 	if (HAS_PCH_SPLIT(dev)) {
 		if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
-			return;
+			return false;
 		if (dev_priv->edp.support) {
 			DRM_DEBUG_KMS("disable LVDS for eDP support\n");
-			return;
+			return false;
 		}
 	}
 
 	if (!intel_lvds_ddc_probe(dev, pin)) {
 		DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n");
-		return;
+		return false;
 	}
 
 	intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL);
 	if (!intel_lvds) {
-		return;
+		return false;
 	}
 
 	intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
 	if (!intel_connector) {
 		kfree(intel_lvds);
-		return;
+		return false;
 	}
 
 	if (!HAS_PCH_SPLIT(dev)) {
@@ -939,7 +946,16 @@ void intel_lvds_init(struct drm_device *dev)
 	 */
 	intel_lvds->edid = drm_get_edid(connector,
 					&dev_priv->gmbus[pin].adapter);
-
+	if (intel_lvds->edid) {
+		if (drm_add_edid_modes(connector,
+				       intel_lvds->edid)) {
+			drm_mode_connector_update_edid_property(connector,
+								intel_lvds->edid);
+		} else {
+			kfree(intel_lvds->edid);
+			intel_lvds->edid = NULL;
+		}
+	}
 	if (!intel_lvds->edid) {
 		/* Didn't get an EDID, so
 		 * Set wide sync ranges so we get all modes
@@ -1020,7 +1036,7 @@ out:
 	/* keep the LVDS connector */
 	dev_priv->int_lvds_connector = connector;
 	drm_sysfs_connector_add(connector);
-	return;
+	return true;
 
 failed:
 	DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
@@ -1028,4 +1044,5 @@ failed:
 	drm_encoder_cleanup(encoder);
 	kfree(intel_lvds);
 	kfree(intel_connector);
+	return false;
 }
diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c
index 917c7dc3cd6..9b0d9a867ae 100644
--- a/drivers/gpu/drm/i915/intel_opregion.c
+++ b/drivers/gpu/drm/i915/intel_opregion.c
@@ -512,6 +512,6 @@ int intel_opregion_setup(struct drm_device *dev)
 	return 0;
 
 err_out:
-	iounmap(opregion->header);
+	iounmap(base);
 	return err;
 }
diff --git a/drivers/gpu/drm/i915/intel_overlay.c b/drivers/gpu/drm/i915/intel_overlay.c
index afb96d25219..02ff0a481f4 100644
--- a/drivers/gpu/drm/i915/intel_overlay.c
+++ b/drivers/gpu/drm/i915/intel_overlay.c
@@ -946,7 +946,9 @@ static int check_overlay_src(struct drm_device *dev,
 {
 	int uv_hscale = uv_hsubsampling(rec->flags);
 	int uv_vscale = uv_vsubsampling(rec->flags);
-	u32 stride_mask, depth, tmp;
+	u32 stride_mask;
+	int depth;
+	u32 tmp;
 
 	/* check src dimensions */
 	if (IS_845G(dev) || IS_I830(dev)) {
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index 09f2dc353ae..31cd7e33e82 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -156,28 +156,30 @@ static int init_ring_common(struct drm_device *dev,
 
 	/* G45 ring initialization fails to reset head to zero */
 	if (head != 0) {
-		DRM_ERROR("%s head not reset to zero "
-				"ctl %08x head %08x tail %08x start %08x\n",
-				ring->name,
-				I915_READ_CTL(ring),
-				I915_READ_HEAD(ring),
-				I915_READ_TAIL(ring),
-				I915_READ_START(ring));
+		DRM_DEBUG_KMS("%s head not reset to zero "
+			      "ctl %08x head %08x tail %08x start %08x\n",
+			      ring->name,
+			      I915_READ_CTL(ring),
+			      I915_READ_HEAD(ring),
+			      I915_READ_TAIL(ring),
+			      I915_READ_START(ring));
 
 		I915_WRITE_HEAD(ring, 0);
 
-		DRM_ERROR("%s head forced to zero "
-				"ctl %08x head %08x tail %08x start %08x\n",
-				ring->name,
-				I915_READ_CTL(ring),
-				I915_READ_HEAD(ring),
-				I915_READ_TAIL(ring),
-				I915_READ_START(ring));
+		if (I915_READ_HEAD(ring) & HEAD_ADDR) {
+			DRM_ERROR("failed to set %s head to zero "
+				  "ctl %08x head %08x tail %08x start %08x\n",
+				  ring->name,
+				  I915_READ_CTL(ring),
+				  I915_READ_HEAD(ring),
+				  I915_READ_TAIL(ring),
+				  I915_READ_START(ring));
+		}
 	}
 
 	I915_WRITE_CTL(ring,
 			((ring->gem_object->size - PAGE_SIZE) & RING_NR_PAGES)
-			| RING_NO_REPORT | RING_VALID);
+			| RING_REPORT_64K | RING_VALID);
 
 	head = I915_READ_HEAD(ring) & HEAD_ADDR;
 	/* If the head is still not zero, the ring is dead */
@@ -654,6 +656,10 @@ void intel_cleanup_ring_buffer(struct drm_device *dev,
 	i915_gem_object_unpin(ring->gem_object);
 	drm_gem_object_unreference(ring->gem_object);
 	ring->gem_object = NULL;
+
+	if (ring->cleanup)
+		ring->cleanup(ring);
+
 	cleanup_status_page(dev, ring);
 }
 
@@ -688,11 +694,19 @@ int intel_wait_ring_buffer(struct drm_device *dev,
 {
 	unsigned long end;
 	drm_i915_private_t *dev_priv = dev->dev_private;
+	u32 head;
 
 	trace_i915_ring_wait_begin (dev);
 	end = jiffies + 3 * HZ;
 	do {
-		ring->head = I915_READ_HEAD(ring) & HEAD_ADDR;
+		/* If the reported head position has wrapped or hasn't advanced,
+		 * fallback to the slow and accurate path.
+		 */
+		head = intel_read_status_page(ring, 4);
+		if (head < ring->actual_head)
+			head = I915_READ_HEAD(ring);
+		ring->actual_head = head;
+		ring->head = head & HEAD_ADDR;
 		ring->space = ring->head - (ring->tail + 8);
 		if (ring->space < 0)
 			ring->space += ring->size;
@@ -854,19 +868,125 @@ blt_ring_put_user_irq(struct drm_device *dev,
 	/* do nothing */
 }
 
+
+/* Workaround for some stepping of SNB,
+ * each time when BLT engine ring tail moved,
+ * the first command in the ring to be parsed
+ * should be MI_BATCH_BUFFER_START
+ */
+#define NEED_BLT_WORKAROUND(dev) \
+	(IS_GEN6(dev) && (dev->pdev->revision < 8))
+
+static inline struct drm_i915_gem_object *
+to_blt_workaround(struct intel_ring_buffer *ring)
+{
+	return ring->private;
+}
+
+static int blt_ring_init(struct drm_device *dev,
+			 struct intel_ring_buffer *ring)
+{
+	if (NEED_BLT_WORKAROUND(dev)) {
+		struct drm_i915_gem_object *obj;
+		u32 __iomem *ptr;
+		int ret;
+
+		obj = to_intel_bo(i915_gem_alloc_object(dev, 4096));
+		if (obj == NULL)
+			return -ENOMEM;
+
+		ret = i915_gem_object_pin(&obj->base, 4096);
+		if (ret) {
+			drm_gem_object_unreference(&obj->base);
+			return ret;
+		}
+
+		ptr = kmap(obj->pages[0]);
+		iowrite32(MI_BATCH_BUFFER_END, ptr);
+		iowrite32(MI_NOOP, ptr+1);
+		kunmap(obj->pages[0]);
+
+		ret = i915_gem_object_set_to_gtt_domain(&obj->base, false);
+		if (ret) {
+			i915_gem_object_unpin(&obj->base);
+			drm_gem_object_unreference(&obj->base);
+			return ret;
+		}
+
+		ring->private = obj;
+	}
+
+	return init_ring_common(dev, ring);
+}
+
+static void blt_ring_begin(struct drm_device *dev,
+			   struct intel_ring_buffer *ring,
+			  int num_dwords)
+{
+	if (ring->private) {
+		intel_ring_begin(dev, ring, num_dwords+2);
+		intel_ring_emit(dev, ring, MI_BATCH_BUFFER_START);
+		intel_ring_emit(dev, ring, to_blt_workaround(ring)->gtt_offset);
+	} else
+		intel_ring_begin(dev, ring, 4);
+}
+
+static void blt_ring_flush(struct drm_device *dev,
+			   struct intel_ring_buffer *ring,
+			   u32 invalidate_domains,
+			   u32 flush_domains)
+{
+	blt_ring_begin(dev, ring, 4);
+	intel_ring_emit(dev, ring, MI_FLUSH_DW);
+	intel_ring_emit(dev, ring, 0);
+	intel_ring_emit(dev, ring, 0);
+	intel_ring_emit(dev, ring, 0);
+	intel_ring_advance(dev, ring);
+}
+
+static u32
+blt_ring_add_request(struct drm_device *dev,
+		     struct intel_ring_buffer *ring,
+		     u32 flush_domains)
+{
+	u32 seqno = i915_gem_get_seqno(dev);
+
+	blt_ring_begin(dev, ring, 4);
+	intel_ring_emit(dev, ring, MI_STORE_DWORD_INDEX);
+	intel_ring_emit(dev, ring,
+			I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT);
+	intel_ring_emit(dev, ring, seqno);
+	intel_ring_emit(dev, ring, MI_USER_INTERRUPT);
+	intel_ring_advance(dev, ring);
+
+	DRM_DEBUG_DRIVER("%s %d\n", ring->name, seqno);
+	return seqno;
+}
+
+static void blt_ring_cleanup(struct intel_ring_buffer *ring)
+{
+	if (!ring->private)
+		return;
+
+	i915_gem_object_unpin(ring->private);
+	drm_gem_object_unreference(ring->private);
+	ring->private = NULL;
+}
+
 static const struct intel_ring_buffer gen6_blt_ring = {
        .name			= "blt ring",
        .id			= RING_BLT,
        .mmio_base		= BLT_RING_BASE,
        .size			= 32 * PAGE_SIZE,
-       .init			= init_ring_common,
+       .init			= blt_ring_init,
        .write_tail		= ring_write_tail,
-       .flush			= gen6_ring_flush,
-       .add_request		= ring_add_request,
+       .flush			= blt_ring_flush,
+       .add_request		= blt_ring_add_request,
        .get_seqno		= ring_status_page_get_seqno,
        .user_irq_get		= blt_ring_get_user_irq,
        .user_irq_put		= blt_ring_put_user_irq,
        .dispatch_gem_execbuffer	= gen6_ring_dispatch_gem_execbuffer,
+       .cleanup			= blt_ring_cleanup,
 };
 
 int intel_init_render_ring_buffer(struct drm_device *dev)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index a05aff0e576..d2cd0f1efee 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -30,8 +30,9 @@ struct  intel_ring_buffer {
 	struct		drm_device *dev;
 	struct		drm_gem_object *gem_object;
 
-	unsigned int	head;
-	unsigned int	tail;
+	u32		actual_head;
+	u32		head;
+	u32		tail;
 	int		space;
 	struct intel_hw_status_page status_page;
 
@@ -63,6 +64,7 @@ struct  intel_ring_buffer {
 			struct drm_i915_gem_execbuffer2 *exec,
 			struct drm_clip_rect *cliprects,
 			uint64_t exec_offset);
+	void		(*cleanup)(struct intel_ring_buffer *ring);
 
 	/**
 	 * List of objects currently involved in rendering from the
@@ -98,6 +100,8 @@ struct  intel_ring_buffer {
 
 	wait_queue_head_t irq_queue;
 	drm_local_map_t map;
+
+	void *private;
 };
 
 static inline u32
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index de158b76bcd..6bc42fa2a6e 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -107,7 +107,8 @@ struct intel_sdvo {
 	 * This is set if we treat the device as HDMI, instead of DVI.
 	 */
 	bool is_hdmi;
-	bool has_audio;
+	bool has_hdmi_monitor;
+	bool has_hdmi_audio;
 
 	/**
 	 * This is set if we detect output of sdvo device as LVDS and
@@ -1023,7 +1024,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 	if (!intel_sdvo_set_target_input(intel_sdvo))
 		return;
 
-	if (intel_sdvo->is_hdmi &&
+	if (intel_sdvo->has_hdmi_monitor &&
 	    !intel_sdvo_set_avi_infoframe(intel_sdvo))
 		return;
 
@@ -1063,7 +1064,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 	}
 	if (intel_crtc->pipe == 1)
 		sdvox |= SDVO_PIPE_B_SELECT;
-	if (intel_sdvo->has_audio)
+	if (intel_sdvo->has_hdmi_audio)
 		sdvox |= SDVO_AUDIO_ENABLE;
 
 	if (INTEL_INFO(dev)->gen >= 4) {
@@ -1295,55 +1296,14 @@ intel_sdvo_get_edid(struct drm_connector *connector)
 	return drm_get_edid(connector, &sdvo->ddc);
 }
 
-static struct drm_connector *
-intel_find_analog_connector(struct drm_device *dev)
-{
-	struct drm_connector *connector;
-	struct intel_sdvo *encoder;
-
-	list_for_each_entry(encoder,
-			    &dev->mode_config.encoder_list,
-			    base.base.head) {
-		if (encoder->base.type == INTEL_OUTPUT_ANALOG) {
-			list_for_each_entry(connector,
-					    &dev->mode_config.connector_list,
-					    head) {
-				if (&encoder->base ==
-				    intel_attached_encoder(connector))
-					return connector;
-			}
-		}
-	}
-
-	return NULL;
-}
-
-static int
-intel_analog_is_connected(struct drm_device *dev)
-{
-	struct drm_connector *analog_connector;
-
-	analog_connector = intel_find_analog_connector(dev);
-	if (!analog_connector)
-		return false;
-
-	if (analog_connector->funcs->detect(analog_connector, false) ==
-			connector_status_disconnected)
-		return false;
-
-	return true;
-}
-
 /* Mac mini hack -- use the same DDC as the analog connector */
 static struct edid *
 intel_sdvo_get_analog_edid(struct drm_connector *connector)
 {
 	struct drm_i915_private *dev_priv = connector->dev->dev_private;
 
-	if (!intel_analog_is_connected(connector->dev))
-		return NULL;
-
-	return drm_get_edid(connector, &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+	return drm_get_edid(connector,
+			    &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
 }
 
 enum drm_connector_status
@@ -1388,8 +1348,10 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
 		/* DDC bus is shared, match EDID to connector type */
 		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
 			status = connector_status_connected;
-			intel_sdvo->is_hdmi = drm_detect_hdmi_monitor(edid);
-			intel_sdvo->has_audio = drm_detect_monitor_audio(edid);
+			if (intel_sdvo->is_hdmi) {
+				intel_sdvo->has_hdmi_monitor = drm_detect_hdmi_monitor(edid);
+				intel_sdvo->has_hdmi_audio = drm_detect_monitor_audio(edid);
+			}
 		}
 		connector->display_info.raw_edid = NULL;
 		kfree(edid);
@@ -1398,7 +1360,7 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
 	if (status == connector_status_connected) {
 		struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
 		if (intel_sdvo_connector->force_audio)
-			intel_sdvo->has_audio = intel_sdvo_connector->force_audio > 0;
+			intel_sdvo->has_hdmi_audio = intel_sdvo_connector->force_audio > 0;
 	}
 
 	return status;
@@ -1415,10 +1377,12 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
 	if (!intel_sdvo_write_cmd(intel_sdvo,
 				  SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0))
 		return connector_status_unknown;
-	if (intel_sdvo->is_tv) {
-		/* add 30ms delay when the output type is SDVO-TV */
+
+	/* add 30ms delay when the output type might be TV */
+	if (intel_sdvo->caps.output_flags &
+	    (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_CVBS0))
 		mdelay(30);
-	}
+
 	if (!intel_sdvo_read_response(intel_sdvo, &response, 2))
 		return connector_status_unknown;
 
@@ -1472,8 +1436,10 @@ static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
 		edid = intel_sdvo_get_analog_edid(connector);
 
 	if (edid != NULL) {
-		drm_mode_connector_update_edid_property(connector, edid);
-		drm_add_edid_modes(connector, edid);
+		if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+			drm_mode_connector_update_edid_property(connector, edid);
+			drm_add_edid_modes(connector, edid);
+		}
 		connector->display_info.raw_edid = NULL;
 		kfree(edid);
 	}
@@ -1713,12 +1679,12 @@ intel_sdvo_set_property(struct drm_connector *connector,
 
 		intel_sdvo_connector->force_audio = val;
 
-		if (val > 0 && intel_sdvo->has_audio)
+		if (val > 0 && intel_sdvo->has_hdmi_audio)
 			return 0;
-		if (val < 0 && !intel_sdvo->has_audio)
+		if (val < 0 && !intel_sdvo->has_hdmi_audio)
 			return 0;
 
-		intel_sdvo->has_audio = val > 0;
+		intel_sdvo->has_hdmi_audio = val > 0;
 		goto done;
 	}
 
@@ -1942,9 +1908,12 @@ intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv,
 		speed = mapping->i2c_speed;
 	}
 
-	sdvo->i2c = &dev_priv->gmbus[pin].adapter;
-	intel_gmbus_set_speed(sdvo->i2c, speed);
-	intel_gmbus_force_bit(sdvo->i2c, true);
+	if (pin < GMBUS_NUM_PORTS) {
+		sdvo->i2c = &dev_priv->gmbus[pin].adapter;
+		intel_gmbus_set_speed(sdvo->i2c, speed);
+		intel_gmbus_force_bit(sdvo->i2c, true);
+	} else
+		sdvo->i2c = &dev_priv->gmbus[GMBUS_PORT_DPB].adapter;
 }
 
 static bool
@@ -2070,14 +2039,15 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
 		intel_sdvo_set_colorimetry(intel_sdvo,
 					   SDVO_COLORIMETRY_RGB256);
 		connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+
 		intel_sdvo->is_hdmi = true;
 	}
 	intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
 				       (1 << INTEL_ANALOG_CLONE_BIT));
 
 	intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
-
-	intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
+	if (intel_sdvo->is_hdmi)
+		intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
 
 	return true;
 }
diff --git a/drivers/gpu/drm/nouveau/nouveau_backlight.c b/drivers/gpu/drm/nouveau/nouveau_backlight.c
index 406228f4a2a..b14c8111057 100644
--- a/drivers/gpu/drm/nouveau/nouveau_backlight.c
+++ b/drivers/gpu/drm/nouveau/nouveau_backlight.c
@@ -31,6 +31,7 @@
  */
 
 #include <linux/backlight.h>
+#include <linux/acpi.h>
 
 #include "drmP.h"
 #include "nouveau_drv.h"
@@ -136,6 +137,14 @@ int nouveau_backlight_init(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 
+#ifdef CONFIG_ACPI
+	if (acpi_video_backlight_support()) {
+		NV_INFO(dev, "ACPI backlight interface available, "
+			     "not registering our own\n");
+		return 0;
+	}
+#endif
+
 	switch (dev_priv->card_type) {
 	case NV_40:
 		return nouveau_nv40_backlight_init(dev);
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c
index 5f21030a293..b2293576f27 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bios.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bios.c
@@ -6829,7 +6829,7 @@ nouveau_bios_posted(struct drm_device *dev)
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	unsigned htotal;
 
-	if (dev_priv->chipset >= NV_50) {
+	if (dev_priv->card_type >= NV_50) {
 		if (NVReadVgaCrtc(dev, 0, 0x00) == 0 &&
 		    NVReadVgaCrtc(dev, 0, 0x1a) == 0)
 			return false;
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 80353e2b840..c41e1c200ef 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -143,8 +143,10 @@ nouveau_bo_new(struct drm_device *dev, struct nouveau_channel *chan,
 	nvbo->no_vm = no_vm;
 	nvbo->tile_mode = tile_mode;
 	nvbo->tile_flags = tile_flags;
+	nvbo->bo.bdev = &dev_priv->ttm.bdev;
 
-	nouveau_bo_fixup_align(dev, tile_mode, tile_flags, &align, &size);
+	nouveau_bo_fixup_align(dev, tile_mode, nouveau_bo_tile_layout(nvbo),
+			       &align, &size);
 	align >>= PAGE_SHIFT;
 
 	nouveau_bo_placement_set(nvbo, flags, 0);
@@ -176,6 +178,31 @@ set_placement_list(uint32_t *pl, unsigned *n, uint32_t type, uint32_t flags)
 		pl[(*n)++] = TTM_PL_FLAG_SYSTEM | flags;
 }
 
+static void
+set_placement_range(struct nouveau_bo *nvbo, uint32_t type)
+{
+	struct drm_nouveau_private *dev_priv = nouveau_bdev(nvbo->bo.bdev);
+
+	if (dev_priv->card_type == NV_10 &&
+	    nvbo->tile_mode && (type & TTM_PL_FLAG_VRAM)) {
+		/*
+		 * Make sure that the color and depth buffers are handled
+		 * by independent memory controller units. Up to a 9x
+		 * speed up when alpha-blending and depth-test are enabled
+		 * at the same time.
+		 */
+		int vram_pages = dev_priv->vram_size >> PAGE_SHIFT;
+
+		if (nvbo->tile_flags & NOUVEAU_GEM_TILE_ZETA) {
+			nvbo->placement.fpfn = vram_pages / 2;
+			nvbo->placement.lpfn = ~0;
+		} else {
+			nvbo->placement.fpfn = 0;
+			nvbo->placement.lpfn = vram_pages / 2;
+		}
+	}
+}
+
 void
 nouveau_bo_placement_set(struct nouveau_bo *nvbo, uint32_t type, uint32_t busy)
 {
@@ -190,6 +217,8 @@ nouveau_bo_placement_set(struct nouveau_bo *nvbo, uint32_t type, uint32_t busy)
 	pl->busy_placement = nvbo->busy_placements;
 	set_placement_list(nvbo->busy_placements, &pl->num_busy_placement,
 			   type | busy, flags);
+
+	set_placement_range(nvbo, type);
 }
 
 int
@@ -525,7 +554,8 @@ nv50_bo_move_m2mf(struct nouveau_channel *chan, struct ttm_buffer_object *bo,
 		stride  = 16 * 4;
 		height  = amount / stride;
 
-		if (new_mem->mem_type == TTM_PL_VRAM && nvbo->tile_flags) {
+		if (new_mem->mem_type == TTM_PL_VRAM &&
+		    nouveau_bo_tile_layout(nvbo)) {
 			ret = RING_SPACE(chan, 8);
 			if (ret)
 				return ret;
@@ -546,7 +576,8 @@ nv50_bo_move_m2mf(struct nouveau_channel *chan, struct ttm_buffer_object *bo,
 			BEGIN_RING(chan, NvSubM2MF, 0x0200, 1);
 			OUT_RING  (chan, 1);
 		}
-		if (old_mem->mem_type == TTM_PL_VRAM && nvbo->tile_flags) {
+		if (old_mem->mem_type == TTM_PL_VRAM &&
+		    nouveau_bo_tile_layout(nvbo)) {
 			ret = RING_SPACE(chan, 8);
 			if (ret)
 				return ret;
@@ -753,7 +784,8 @@ nouveau_bo_vm_bind(struct ttm_buffer_object *bo, struct ttm_mem_reg *new_mem,
 	if (dev_priv->card_type == NV_50) {
 		ret = nv50_mem_vm_bind_linear(dev,
 					      offset + dev_priv->vm_vram_base,
-					      new_mem->size, nvbo->tile_flags,
+					      new_mem->size,
+					      nouveau_bo_tile_layout(nvbo),
 					      offset);
 		if (ret)
 			return ret;
@@ -894,7 +926,8 @@ nouveau_ttm_fault_reserve_notify(struct ttm_buffer_object *bo)
 	 * nothing to do here.
 	 */
 	if (bo->mem.mem_type != TTM_PL_VRAM) {
-		if (dev_priv->card_type < NV_50 || !nvbo->tile_flags)
+		if (dev_priv->card_type < NV_50 ||
+		    !nouveau_bo_tile_layout(nvbo))
 			return 0;
 	}
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 0871495096f..52c356e9a3d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -281,7 +281,7 @@ detect_analog:
 	nv_encoder = find_encoder_by_type(connector, OUTPUT_ANALOG);
 	if (!nv_encoder && !nouveau_tv_disable)
 		nv_encoder = find_encoder_by_type(connector, OUTPUT_TV);
-	if (nv_encoder) {
+	if (nv_encoder && force) {
 		struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
 		struct drm_encoder_helper_funcs *helper =
 						encoder->helper_private;
@@ -641,11 +641,28 @@ nouveau_connector_get_modes(struct drm_connector *connector)
 	return ret;
 }
 
+static unsigned
+get_tmds_link_bandwidth(struct drm_connector *connector)
+{
+	struct nouveau_connector *nv_connector = nouveau_connector(connector);
+	struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
+	struct dcb_entry *dcb = nv_connector->detected_encoder->dcb;
+
+	if (dcb->location != DCB_LOC_ON_CHIP ||
+	    dev_priv->chipset >= 0x46)
+		return 165000;
+	else if (dev_priv->chipset >= 0x40)
+		return 155000;
+	else if (dev_priv->chipset >= 0x18)
+		return 135000;
+	else
+		return 112000;
+}
+
 static int
 nouveau_connector_mode_valid(struct drm_connector *connector,
 			     struct drm_display_mode *mode)
 {
-	struct drm_nouveau_private *dev_priv = connector->dev->dev_private;
 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
 	struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
@@ -663,11 +680,9 @@ nouveau_connector_mode_valid(struct drm_connector *connector,
 		max_clock = 400000;
 		break;
 	case OUTPUT_TMDS:
-		if ((dev_priv->card_type >= NV_50 && !nouveau_duallink) ||
-		    !nv_encoder->dcb->duallink_possible)
-			max_clock = 165000;
-		else
-			max_clock = 330000;
+		max_clock = get_tmds_link_bandwidth(connector);
+		if (nouveau_duallink && nv_encoder->dcb->duallink_possible)
+			max_clock *= 2;
 		break;
 	case OUTPUT_ANALOG:
 		max_clock = nv_encoder->dcb->crtconf.maxfreq;
@@ -709,44 +724,6 @@ nouveau_connector_best_encoder(struct drm_connector *connector)
 	return NULL;
 }
 
-void
-nouveau_connector_set_polling(struct drm_connector *connector)
-{
-	struct drm_device *dev = connector->dev;
-	struct drm_nouveau_private *dev_priv = dev->dev_private;
-	struct drm_crtc *crtc;
-	bool spare_crtc = false;
-
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
-		spare_crtc |= !crtc->enabled;
-
-	connector->polled = 0;
-
-	switch (connector->connector_type) {
-	case DRM_MODE_CONNECTOR_VGA:
-	case DRM_MODE_CONNECTOR_TV:
-		if (dev_priv->card_type >= NV_50 ||
-		    (nv_gf4_disp_arch(dev) && spare_crtc))
-			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
-		break;
-
-	case DRM_MODE_CONNECTOR_DVII:
-	case DRM_MODE_CONNECTOR_DVID:
-	case DRM_MODE_CONNECTOR_HDMIA:
-	case DRM_MODE_CONNECTOR_DisplayPort:
-	case DRM_MODE_CONNECTOR_eDP:
-		if (dev_priv->card_type >= NV_50)
-			connector->polled = DRM_CONNECTOR_POLL_HPD;
-		else if (connector->connector_type == DRM_MODE_CONNECTOR_DVID ||
-			 spare_crtc)
-			connector->polled = DRM_CONNECTOR_POLL_CONNECT;
-		break;
-
-	default:
-		break;
-	}
-}
-
 static const struct drm_connector_helper_funcs
 nouveau_connector_helper_funcs = {
 	.get_modes = nouveau_connector_get_modes,
@@ -872,6 +849,7 @@ nouveau_connector_create(struct drm_device *dev, int index)
 					dev->mode_config.scaling_mode_property,
 					nv_connector->scaling_mode);
 		}
+		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 		/* fall-through */
 	case DCB_CONNECTOR_TV_0:
 	case DCB_CONNECTOR_TV_1:
@@ -888,11 +866,16 @@ nouveau_connector_create(struct drm_device *dev, int index)
 				dev->mode_config.dithering_mode_property,
 				nv_connector->use_dithering ?
 				DRM_MODE_DITHERING_ON : DRM_MODE_DITHERING_OFF);
+
+		if (dcb->type != DCB_CONNECTOR_LVDS) {
+			if (dev_priv->card_type >= NV_50)
+				connector->polled = DRM_CONNECTOR_POLL_HPD;
+			else
+				connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+		}
 		break;
 	}
 
-	nouveau_connector_set_polling(connector);
-
 	drm_sysfs_connector_add(connector);
 	dcb->drm = connector;
 	return dcb->drm;
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.h b/drivers/gpu/drm/nouveau/nouveau_connector.h
index c21ed6b16f8..711b1e9203a 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.h
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.h
@@ -52,9 +52,6 @@ static inline struct nouveau_connector *nouveau_connector(
 struct drm_connector *
 nouveau_connector_create(struct drm_device *, int index);
 
-void
-nouveau_connector_set_polling(struct drm_connector *);
-
 int
 nouveau_connector_bpp(struct drm_connector *);
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index 3a07e580d27..1c7db64c03b 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -100,6 +100,9 @@ struct nouveau_bo {
 	int pin_refcnt;
 };
 
+#define nouveau_bo_tile_layout(nvbo)				\
+	((nvbo)->tile_flags & NOUVEAU_GEM_TILE_LAYOUT_MASK)
+
 static inline struct nouveau_bo *
 nouveau_bo(struct ttm_buffer_object *bo)
 {
@@ -304,6 +307,7 @@ struct nouveau_fifo_engine {
 	void (*destroy_context)(struct nouveau_channel *);
 	int  (*load_context)(struct nouveau_channel *);
 	int  (*unload_context)(struct drm_device *);
+	void (*tlb_flush)(struct drm_device *dev);
 };
 
 struct nouveau_pgraph_object_method {
@@ -336,6 +340,7 @@ struct nouveau_pgraph_engine {
 	void (*destroy_context)(struct nouveau_channel *);
 	int  (*load_context)(struct nouveau_channel *);
 	int  (*unload_context)(struct drm_device *);
+	void (*tlb_flush)(struct drm_device *dev);
 
 	void (*set_region_tiling)(struct drm_device *dev, int i, uint32_t addr,
 				  uint32_t size, uint32_t pitch);
@@ -485,13 +490,13 @@ enum nv04_fp_display_regs {
 };
 
 struct nv04_crtc_reg {
-	unsigned char MiscOutReg;     /* */
+	unsigned char MiscOutReg;
 	uint8_t CRTC[0xa0];
 	uint8_t CR58[0x10];
 	uint8_t Sequencer[5];
 	uint8_t Graphics[9];
 	uint8_t Attribute[21];
-	unsigned char DAC[768];       /* Internal Colorlookuptable */
+	unsigned char DAC[768];
 
 	/* PCRTC regs */
 	uint32_t fb_start;
@@ -539,43 +544,9 @@ struct nv04_output_reg {
 };
 
 struct nv04_mode_state {
-	uint32_t bpp;
-	uint32_t width;
-	uint32_t height;
-	uint32_t interlace;
-	uint32_t repaint0;
-	uint32_t repaint1;
-	uint32_t screen;
-	uint32_t scale;
-	uint32_t dither;
-	uint32_t extra;
-	uint32_t fifo;
-	uint32_t pixel;
-	uint32_t horiz;
-	int arbitration0;
-	int arbitration1;
-	uint32_t pll;
-	uint32_t pllB;
-	uint32_t vpll;
-	uint32_t vpll2;
-	uint32_t vpllB;
-	uint32_t vpll2B;
+	struct nv04_crtc_reg crtc_reg[2];
 	uint32_t pllsel;
 	uint32_t sel_clk;
-	uint32_t general;
-	uint32_t crtcOwner;
-	uint32_t head;
-	uint32_t head2;
-	uint32_t cursorConfig;
-	uint32_t cursor0;
-	uint32_t cursor1;
-	uint32_t cursor2;
-	uint32_t timingH;
-	uint32_t timingV;
-	uint32_t displayV;
-	uint32_t crtcSync;
-
-	struct nv04_crtc_reg crtc_reg[2];
 };
 
 enum nouveau_card_type {
@@ -613,6 +584,12 @@ struct drm_nouveau_private {
 	struct work_struct irq_work;
 	struct work_struct hpd_work;
 
+	struct {
+		spinlock_t lock;
+		uint32_t hpd0_bits;
+		uint32_t hpd1_bits;
+	} hpd_state;
+
 	struct list_head vbl_waiting;
 
 	struct {
@@ -1045,6 +1022,7 @@ extern int  nv50_fifo_create_context(struct nouveau_channel *);
 extern void nv50_fifo_destroy_context(struct nouveau_channel *);
 extern int  nv50_fifo_load_context(struct nouveau_channel *);
 extern int  nv50_fifo_unload_context(struct drm_device *);
+extern void nv50_fifo_tlb_flush(struct drm_device *dev);
 
 /* nvc0_fifo.c */
 extern int  nvc0_fifo_init(struct drm_device *);
@@ -1122,6 +1100,8 @@ extern int  nv50_graph_load_context(struct nouveau_channel *);
 extern int  nv50_graph_unload_context(struct drm_device *);
 extern void nv50_graph_context_switch(struct drm_device *);
 extern int  nv50_grctx_init(struct nouveau_grctx *);
+extern void nv50_graph_tlb_flush(struct drm_device *dev);
+extern void nv86_graph_tlb_flush(struct drm_device *dev);
 
 /* nvc0_graph.c */
 extern int  nvc0_graph_init(struct drm_device *);
@@ -1239,7 +1219,6 @@ extern u16 nouveau_bo_rd16(struct nouveau_bo *nvbo, unsigned index);
 extern void nouveau_bo_wr16(struct nouveau_bo *nvbo, unsigned index, u16 val);
 extern u32 nouveau_bo_rd32(struct nouveau_bo *nvbo, unsigned index);
 extern void nouveau_bo_wr32(struct nouveau_bo *nvbo, unsigned index, u32 val);
-extern int nouveau_bo_sync_gpu(struct nouveau_bo *, struct nouveau_channel *);
 
 /* nouveau_fence.c */
 struct nouveau_fence;
diff --git a/drivers/gpu/drm/nouveau/nouveau_fence.c b/drivers/gpu/drm/nouveau/nouveau_fence.c
index 441b12420bb..ab1bbfbf266 100644
--- a/drivers/gpu/drm/nouveau/nouveau_fence.c
+++ b/drivers/gpu/drm/nouveau/nouveau_fence.c
@@ -249,6 +249,7 @@ alloc_semaphore(struct drm_device *dev)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_semaphore *sema;
+	int ret;
 
 	if (!USE_SEMA(dev))
 		return NULL;
@@ -257,10 +258,14 @@ alloc_semaphore(struct drm_device *dev)
 	if (!sema)
 		goto fail;
 
+	ret = drm_mm_pre_get(&dev_priv->fence.heap);
+	if (ret)
+		goto fail;
+
 	spin_lock(&dev_priv->fence.lock);
 	sema->mem = drm_mm_search_free(&dev_priv->fence.heap, 4, 0, 0);
 	if (sema->mem)
-		sema->mem = drm_mm_get_block(sema->mem, 4, 0);
+		sema->mem = drm_mm_get_block_atomic(sema->mem, 4, 0);
 	spin_unlock(&dev_priv->fence.lock);
 
 	if (!sema->mem)
diff --git a/drivers/gpu/drm/nouveau/nouveau_gem.c b/drivers/gpu/drm/nouveau/nouveau_gem.c
index 5c4c929d7f7..9a1fdcf400c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_gem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_gem.c
@@ -107,23 +107,29 @@ nouveau_gem_info(struct drm_gem_object *gem, struct drm_nouveau_gem_info *rep)
 }
 
 static bool
-nouveau_gem_tile_flags_valid(struct drm_device *dev, uint32_t tile_flags) {
-	switch (tile_flags) {
-	case 0x0000:
-	case 0x1800:
-	case 0x2800:
-	case 0x4800:
-	case 0x7000:
-	case 0x7400:
-	case 0x7a00:
-	case 0xe000:
-		break;
-	default:
-		NV_ERROR(dev, "bad page flags: 0x%08x\n", tile_flags);
-		return false;
+nouveau_gem_tile_flags_valid(struct drm_device *dev, uint32_t tile_flags)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+	if (dev_priv->card_type >= NV_50) {
+		switch (tile_flags & NOUVEAU_GEM_TILE_LAYOUT_MASK) {
+		case 0x0000:
+		case 0x1800:
+		case 0x2800:
+		case 0x4800:
+		case 0x7000:
+		case 0x7400:
+		case 0x7a00:
+		case 0xe000:
+			return true;
+		}
+	} else {
+		if (!(tile_flags & NOUVEAU_GEM_TILE_LAYOUT_MASK))
+			return true;
 	}
 
-	return true;
+	NV_ERROR(dev, "bad page flags: 0x%08x\n", tile_flags);
+	return false;
 }
 
 int
diff --git a/drivers/gpu/drm/nouveau/nouveau_hw.c b/drivers/gpu/drm/nouveau/nouveau_hw.c
index bed669a54a2..b9672a05c41 100644
--- a/drivers/gpu/drm/nouveau/nouveau_hw.c
+++ b/drivers/gpu/drm/nouveau/nouveau_hw.c
@@ -519,11 +519,11 @@ nouveau_hw_fix_bad_vpll(struct drm_device *dev, int head)
 
 	struct pll_lims pll_lim;
 	struct nouveau_pll_vals pv;
-	uint32_t pllreg = head ? NV_RAMDAC_VPLL2 : NV_PRAMDAC_VPLL_COEFF;
+	enum pll_types pll = head ? PLL_VPLL1 : PLL_VPLL0;
 
-	if (get_pll_limits(dev, pllreg, &pll_lim))
+	if (get_pll_limits(dev, pll, &pll_lim))
 		return;
-	nouveau_hw_get_pllvals(dev, pllreg, &pv);
+	nouveau_hw_get_pllvals(dev, pll, &pv);
 
 	if (pv.M1 >= pll_lim.vco1.min_m && pv.M1 <= pll_lim.vco1.max_m &&
 	    pv.N1 >= pll_lim.vco1.min_n && pv.N1 <= pll_lim.vco1.max_n &&
@@ -536,7 +536,7 @@ nouveau_hw_fix_bad_vpll(struct drm_device *dev, int head)
 	pv.M1 = pll_lim.vco1.max_m;
 	pv.N1 = pll_lim.vco1.min_n;
 	pv.log2P = pll_lim.max_usable_log2p;
-	nouveau_hw_setpll(dev, pllreg, &pv);
+	nouveau_hw_setpll(dev, pll_lim.reg, &pv);
 }
 
 /*
diff --git a/drivers/gpu/drm/nouveau/nouveau_hw.h b/drivers/gpu/drm/nouveau/nouveau_hw.h
index 869130f8360..2989090b943 100644
--- a/drivers/gpu/drm/nouveau/nouveau_hw.h
+++ b/drivers/gpu/drm/nouveau/nouveau_hw.h
@@ -416,6 +416,25 @@ nv_fix_nv40_hw_cursor(struct drm_device *dev, int head)
 }
 
 static inline void
+nv_set_crtc_base(struct drm_device *dev, int head, uint32_t offset)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+
+	NVWriteCRTC(dev, head, NV_PCRTC_START, offset);
+
+	if (dev_priv->card_type == NV_04) {
+		/*
+		 * Hilarious, the 24th bit doesn't want to stick to
+		 * PCRTC_START...
+		 */
+		int cre_heb = NVReadVgaCrtc(dev, head, NV_CIO_CRE_HEB__INDEX);
+
+		NVWriteVgaCrtc(dev, head, NV_CIO_CRE_HEB__INDEX,
+			       (cre_heb & ~0x40) | ((offset >> 18) & 0x40));
+	}
+}
+
+static inline void
 nv_show_cursor(struct drm_device *dev, int head, bool show)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
diff --git a/drivers/gpu/drm/nouveau/nouveau_i2c.c b/drivers/gpu/drm/nouveau/nouveau_i2c.c
index fdd7e3de79c..cb389d01432 100644
--- a/drivers/gpu/drm/nouveau/nouveau_i2c.c
+++ b/drivers/gpu/drm/nouveau/nouveau_i2c.c
@@ -256,7 +256,7 @@ nouveau_i2c_find(struct drm_device *dev, int index)
 	if (index >= DCB_MAX_NUM_I2C_ENTRIES)
 		return NULL;
 
-	if (dev_priv->chipset >= NV_50 && (i2c->entry & 0x00000100)) {
+	if (dev_priv->card_type >= NV_50 && (i2c->entry & 0x00000100)) {
 		uint32_t reg = 0xe500, val;
 
 		if (i2c->port_type == 6) {
diff --git a/drivers/gpu/drm/nouveau/nouveau_irq.c b/drivers/gpu/drm/nouveau/nouveau_irq.c
index 6fd51a51c60..7bfd9e6c9d6 100644
--- a/drivers/gpu/drm/nouveau/nouveau_irq.c
+++ b/drivers/gpu/drm/nouveau/nouveau_irq.c
@@ -42,6 +42,13 @@
 #include "nouveau_connector.h"
 #include "nv50_display.h"
 
+static DEFINE_RATELIMIT_STATE(nouveau_ratelimit_state, 3 * HZ, 20);
+
+static int nouveau_ratelimit(void)
+{
+	return __ratelimit(&nouveau_ratelimit_state);
+}
+
 void
 nouveau_irq_preinstall(struct drm_device *dev)
 {
@@ -53,6 +60,7 @@ nouveau_irq_preinstall(struct drm_device *dev)
 	if (dev_priv->card_type >= NV_50) {
 		INIT_WORK(&dev_priv->irq_work, nv50_display_irq_handler_bh);
 		INIT_WORK(&dev_priv->hpd_work, nv50_display_irq_hotplug_bh);
+		spin_lock_init(&dev_priv->hpd_state.lock);
 		INIT_LIST_HEAD(&dev_priv->vbl_waiting);
 	}
 }
@@ -202,8 +210,8 @@ nouveau_fifo_irq_handler(struct drm_device *dev)
 		}
 
 		if (status & NV_PFIFO_INTR_DMA_PUSHER) {
-			u32 get = nv_rd32(dev, 0x003244);
-			u32 put = nv_rd32(dev, 0x003240);
+			u32 dma_get = nv_rd32(dev, 0x003244);
+			u32 dma_put = nv_rd32(dev, 0x003240);
 			u32 push = nv_rd32(dev, 0x003220);
 			u32 state = nv_rd32(dev, 0x003228);
 
@@ -213,16 +221,18 @@ nouveau_fifo_irq_handler(struct drm_device *dev)
 				u32 ib_get = nv_rd32(dev, 0x003334);
 				u32 ib_put = nv_rd32(dev, 0x003330);
 
-				NV_INFO(dev, "PFIFO_DMA_PUSHER - Ch %d Get 0x%02x%08x "
+				if (nouveau_ratelimit())
+					NV_INFO(dev, "PFIFO_DMA_PUSHER - Ch %d Get 0x%02x%08x "
 					     "Put 0x%02x%08x IbGet 0x%08x IbPut 0x%08x "
 					     "State 0x%08x Push 0x%08x\n",
-					chid, ho_get, get, ho_put, put, ib_get, ib_put,
-					state, push);
+						chid, ho_get, dma_get, ho_put,
+						dma_put, ib_get, ib_put, state,
+						push);
 
 				/* METHOD_COUNT, in DMA_STATE on earlier chipsets */
 				nv_wr32(dev, 0x003364, 0x00000000);
-				if (get != put || ho_get != ho_put) {
-					nv_wr32(dev, 0x003244, put);
+				if (dma_get != dma_put || ho_get != ho_put) {
+					nv_wr32(dev, 0x003244, dma_put);
 					nv_wr32(dev, 0x003328, ho_put);
 				} else
 				if (ib_get != ib_put) {
@@ -231,10 +241,10 @@ nouveau_fifo_irq_handler(struct drm_device *dev)
 			} else {
 				NV_INFO(dev, "PFIFO_DMA_PUSHER - Ch %d Get 0x%08x "
 					     "Put 0x%08x State 0x%08x Push 0x%08x\n",
-					chid, get, put, state, push);
+					chid, dma_get, dma_put, state, push);
 
-				if (get != put)
-					nv_wr32(dev, 0x003244, put);
+				if (dma_get != dma_put)
+					nv_wr32(dev, 0x003244, dma_put);
 			}
 
 			nv_wr32(dev, 0x003228, 0x00000000);
@@ -266,8 +276,9 @@ nouveau_fifo_irq_handler(struct drm_device *dev)
 		}
 
 		if (status) {
-			NV_INFO(dev, "PFIFO_INTR 0x%08x - Ch %d\n",
-				status, chid);
+			if (nouveau_ratelimit())
+				NV_INFO(dev, "PFIFO_INTR 0x%08x - Ch %d\n",
+					status, chid);
 			nv_wr32(dev, NV03_PFIFO_INTR_0, status);
 			status = 0;
 		}
@@ -544,13 +555,6 @@ nouveau_pgraph_intr_notify(struct drm_device *dev, uint32_t nsource)
 		nouveau_graph_dump_trap_info(dev, "PGRAPH_NOTIFY", &trap);
 }
 
-static DEFINE_RATELIMIT_STATE(nouveau_ratelimit_state, 3 * HZ, 20);
-
-static int nouveau_ratelimit(void)
-{
-	return __ratelimit(&nouveau_ratelimit_state);
-}
-
 
 static inline void
 nouveau_pgraph_intr_error(struct drm_device *dev, uint32_t nsource)
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index a163c7c612e..fe4a30dc4b4 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -33,9 +33,9 @@
 #include "drmP.h"
 #include "drm.h"
 #include "drm_sarea.h"
-#include "nouveau_drv.h"
 
-#define MIN(a,b) a < b ? a : b
+#include "nouveau_drv.h"
+#include "nouveau_pm.h"
 
 /*
  * NV10-NV40 tiling helpers
@@ -175,11 +175,10 @@ nv50_mem_vm_bind_linear(struct drm_device *dev, uint64_t virt, uint32_t size,
 			}
 		}
 	}
-	dev_priv->engine.instmem.flush(dev);
 
-	nv50_vm_flush(dev, 5);
-	nv50_vm_flush(dev, 0);
-	nv50_vm_flush(dev, 4);
+	dev_priv->engine.instmem.flush(dev);
+	dev_priv->engine.fifo.tlb_flush(dev);
+	dev_priv->engine.graph.tlb_flush(dev);
 	nv50_vm_flush(dev, 6);
 	return 0;
 }
@@ -209,11 +208,10 @@ nv50_mem_vm_unbind(struct drm_device *dev, uint64_t virt, uint32_t size)
 			pte++;
 		}
 	}
-	dev_priv->engine.instmem.flush(dev);
 
-	nv50_vm_flush(dev, 5);
-	nv50_vm_flush(dev, 0);
-	nv50_vm_flush(dev, 4);
+	dev_priv->engine.instmem.flush(dev);
+	dev_priv->engine.fifo.tlb_flush(dev);
+	dev_priv->engine.graph.tlb_flush(dev);
 	nv50_vm_flush(dev, 6);
 }
 
@@ -653,6 +651,7 @@ nouveau_mem_gart_init(struct drm_device *dev)
 void
 nouveau_mem_timing_init(struct drm_device *dev)
 {
+	/* cards < NVC0 only */
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
 	struct nouveau_pm_memtimings *memtimings = &pm->memtimings;
@@ -719,14 +718,14 @@ nouveau_mem_timing_init(struct drm_device *dev)
 		tUNK_19 = 1;
 		tUNK_20 = 0;
 		tUNK_21 = 0;
-		switch (MIN(recordlen,21)) {
-		case 21:
+		switch (min(recordlen, 22)) {
+		case 22:
 			tUNK_21 = entry[21];
-		case 20:
+		case 21:
 			tUNK_20 = entry[20];
-		case 19:
+		case 20:
 			tUNK_19 = entry[19];
-		case 18:
+		case 19:
 			tUNK_18 = entry[18];
 		default:
 			tUNK_0  = entry[0];
@@ -756,24 +755,30 @@ nouveau_mem_timing_init(struct drm_device *dev)
 		timing->reg_100228 = (tUNK_12 << 16 | tUNK_11 << 8 | tUNK_10);
 		if(recordlen > 19) {
 			timing->reg_100228 += (tUNK_19 - 1) << 24;
-		} else {
+		}/* I cannot back-up this else-statement right now
+			 else {
 			timing->reg_100228 += tUNK_12 << 24;
-		}
+		}*/
 
 		/* XXX: reg_10022c */
+		timing->reg_10022c = tUNK_2 - 1;
 
 		timing->reg_100230 = (tUNK_20 << 24 | tUNK_21 << 16 |
 				      tUNK_13 << 8  | tUNK_13);
 
 		/* XXX: +6? */
 		timing->reg_100234 = (tRAS << 24 | (tUNK_19 + 6) << 8 | tRC);
-		if(tUNK_10 > tUNK_11) {
-			timing->reg_100234 += tUNK_10 << 16;
-		} else {
-			timing->reg_100234 += tUNK_11 << 16;
+		timing->reg_100234 += max(tUNK_10,tUNK_11) << 16;
+
+		/* XXX; reg_100238, reg_10023c
+		 * reg: 0x00??????
+		 * reg_10023c:
+		 *      0 for pre-NV50 cards
+		 *      0x????0202 for NV50+ cards (empirical evidence) */
+		if(dev_priv->card_type >= NV_50) {
+			timing->reg_10023c = 0x202;
 		}
 
-		/* XXX; reg_100238, reg_10023c */
 		NV_DEBUG(dev, "Entry %d: 220: %08x %08x %08x %08x\n", i,
 			 timing->reg_100220, timing->reg_100224,
 			 timing->reg_100228, timing->reg_10022c);
diff --git a/drivers/gpu/drm/nouveau/nouveau_object.c b/drivers/gpu/drm/nouveau/nouveau_object.c
index 896cf863414..dd572adca02 100644
--- a/drivers/gpu/drm/nouveau/nouveau_object.c
+++ b/drivers/gpu/drm/nouveau/nouveau_object.c
@@ -129,7 +129,7 @@ nouveau_gpuobj_new(struct drm_device *dev, struct nouveau_channel *chan,
 			if (ramin == NULL) {
 				spin_unlock(&dev_priv->ramin_lock);
 				nouveau_gpuobj_ref(NULL, &gpuobj);
-				return ret;
+				return -ENOMEM;
 			}
 
 			ramin = drm_mm_get_block_atomic(ramin, size, align);
diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c
index 1c99c55d6d4..9f7b158f582 100644
--- a/drivers/gpu/drm/nouveau/nouveau_pm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_pm.c
@@ -284,6 +284,7 @@ nouveau_sysfs_fini(struct drm_device *dev)
 	}
 }
 
+#ifdef CONFIG_HWMON
 static ssize_t
 nouveau_hwmon_show_temp(struct device *d, struct device_attribute *a, char *buf)
 {
@@ -395,10 +396,12 @@ static struct attribute *hwmon_attributes[] = {
 static const struct attribute_group hwmon_attrgroup = {
 	.attrs = hwmon_attributes,
 };
+#endif
 
 static int
 nouveau_hwmon_init(struct drm_device *dev)
 {
+#ifdef CONFIG_HWMON
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
 	struct device *hwmon_dev;
@@ -425,13 +428,14 @@ nouveau_hwmon_init(struct drm_device *dev)
 	}
 
 	pm->hwmon = hwmon_dev;
-
+#endif
 	return 0;
 }
 
 static void
 nouveau_hwmon_fini(struct drm_device *dev)
 {
+#ifdef CONFIG_HWMON
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
 
@@ -439,6 +443,7 @@ nouveau_hwmon_fini(struct drm_device *dev)
 		sysfs_remove_group(&pm->hwmon->kobj, &hwmon_attrgroup);
 		hwmon_device_unregister(pm->hwmon);
 	}
+#endif
 }
 
 int
diff --git a/drivers/gpu/drm/nouveau/nouveau_ramht.c b/drivers/gpu/drm/nouveau/nouveau_ramht.c
index 7f16697cc96..2d8580927ca 100644
--- a/drivers/gpu/drm/nouveau/nouveau_ramht.c
+++ b/drivers/gpu/drm/nouveau/nouveau_ramht.c
@@ -153,26 +153,42 @@ nouveau_ramht_insert(struct nouveau_channel *chan, u32 handle,
 	return -ENOMEM;
 }
 
+static struct nouveau_ramht_entry *
+nouveau_ramht_remove_entry(struct nouveau_channel *chan, u32 handle)
+{
+	struct nouveau_ramht *ramht = chan ? chan->ramht : NULL;
+	struct nouveau_ramht_entry *entry;
+	unsigned long flags;
+
+	if (!ramht)
+		return NULL;
+
+	spin_lock_irqsave(&ramht->lock, flags);
+	list_for_each_entry(entry, &ramht->entries, head) {
+		if (entry->channel == chan &&
+		    (!handle || entry->handle == handle)) {
+			list_del(&entry->head);
+			spin_unlock_irqrestore(&ramht->lock, flags);
+
+			return entry;
+		}
+	}
+	spin_unlock_irqrestore(&ramht->lock, flags);
+
+	return NULL;
+}
+
 static void
-nouveau_ramht_remove_locked(struct nouveau_channel *chan, u32 handle)
+nouveau_ramht_remove_hash(struct nouveau_channel *chan, u32 handle)
 {
 	struct drm_device *dev = chan->dev;
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_instmem_engine *instmem = &dev_priv->engine.instmem;
 	struct nouveau_gpuobj *ramht = chan->ramht->gpuobj;
-	struct nouveau_ramht_entry *entry, *tmp;
+	unsigned long flags;
 	u32 co, ho;
 
-	list_for_each_entry_safe(entry, tmp, &chan->ramht->entries, head) {
-		if (entry->channel != chan || entry->handle != handle)
-			continue;
-
-		nouveau_gpuobj_ref(NULL, &entry->gpuobj);
-		list_del(&entry->head);
-		kfree(entry);
-		break;
-	}
-
+	spin_lock_irqsave(&chan->ramht->lock, flags);
 	co = ho = nouveau_ramht_hash_handle(chan, handle);
 	do {
 		if (nouveau_ramht_entry_valid(dev, ramht, co) &&
@@ -184,7 +200,7 @@ nouveau_ramht_remove_locked(struct nouveau_channel *chan, u32 handle)
 			nv_wo32(ramht, co + 0, 0x00000000);
 			nv_wo32(ramht, co + 4, 0x00000000);
 			instmem->flush(dev);
-			return;
+			goto out;
 		}
 
 		co += 8;
@@ -194,17 +210,22 @@ nouveau_ramht_remove_locked(struct nouveau_channel *chan, u32 handle)
 
 	NV_ERROR(dev, "RAMHT entry not found. ch=%d, handle=0x%08x\n",
 		 chan->id, handle);
+out:
+	spin_unlock_irqrestore(&chan->ramht->lock, flags);
 }
 
 void
 nouveau_ramht_remove(struct nouveau_channel *chan, u32 handle)
 {
-	struct nouveau_ramht *ramht = chan->ramht;
-	unsigned long flags;
+	struct nouveau_ramht_entry *entry;
 
-	spin_lock_irqsave(&ramht->lock, flags);
-	nouveau_ramht_remove_locked(chan, handle);
-	spin_unlock_irqrestore(&ramht->lock, flags);
+	entry = nouveau_ramht_remove_entry(chan, handle);
+	if (!entry)
+		return;
+
+	nouveau_ramht_remove_hash(chan, entry->handle);
+	nouveau_gpuobj_ref(NULL, &entry->gpuobj);
+	kfree(entry);
 }
 
 struct nouveau_gpuobj *
@@ -265,23 +286,19 @@ void
 nouveau_ramht_ref(struct nouveau_ramht *ref, struct nouveau_ramht **ptr,
 		  struct nouveau_channel *chan)
 {
-	struct nouveau_ramht_entry *entry, *tmp;
+	struct nouveau_ramht_entry *entry;
 	struct nouveau_ramht *ramht;
-	unsigned long flags;
 
 	if (ref)
 		kref_get(&ref->refcount);
 
 	ramht = *ptr;
 	if (ramht) {
-		spin_lock_irqsave(&ramht->lock, flags);
-		list_for_each_entry_safe(entry, tmp, &ramht->entries, head) {
-			if (entry->channel != chan)
-				continue;
-
-			nouveau_ramht_remove_locked(chan, entry->handle);
+		while ((entry = nouveau_ramht_remove_entry(chan, 0))) {
+			nouveau_ramht_remove_hash(chan, entry->handle);
+			nouveau_gpuobj_ref(NULL, &entry->gpuobj);
+			kfree(entry);
 		}
-		spin_unlock_irqrestore(&ramht->lock, flags);
 
 		kref_put(&ramht->refcount, nouveau_ramht_del);
 	}
diff --git a/drivers/gpu/drm/nouveau/nouveau_sgdma.c b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
index 288bacac7e5..d4ac9700703 100644
--- a/drivers/gpu/drm/nouveau/nouveau_sgdma.c
+++ b/drivers/gpu/drm/nouveau/nouveau_sgdma.c
@@ -120,8 +120,8 @@ nouveau_sgdma_bind(struct ttm_backend *be, struct ttm_mem_reg *mem)
 	dev_priv->engine.instmem.flush(nvbe->dev);
 
 	if (dev_priv->card_type == NV_50) {
-		nv50_vm_flush(dev, 5); /* PGRAPH */
-		nv50_vm_flush(dev, 0); /* PFIFO */
+		dev_priv->engine.fifo.tlb_flush(dev);
+		dev_priv->engine.graph.tlb_flush(dev);
 	}
 
 	nvbe->bound = true;
@@ -162,8 +162,8 @@ nouveau_sgdma_unbind(struct ttm_backend *be)
 	dev_priv->engine.instmem.flush(nvbe->dev);
 
 	if (dev_priv->card_type == NV_50) {
-		nv50_vm_flush(dev, 5);
-		nv50_vm_flush(dev, 0);
+		dev_priv->engine.fifo.tlb_flush(dev);
+		dev_priv->engine.graph.tlb_flush(dev);
 	}
 
 	nvbe->bound = false;
@@ -224,7 +224,11 @@ nouveau_sgdma_init(struct drm_device *dev)
 	int i, ret;
 
 	if (dev_priv->card_type < NV_50) {
-		aper_size = (64 * 1024 * 1024);
+		if(dev_priv->ramin_rsvd_vram < 2 * 1024 * 1024)
+			aper_size = 64 * 1024 * 1024;
+		else
+			aper_size = 512 * 1024 * 1024;
+
 		obj_size  = (aper_size >> NV_CTXDMA_PAGE_SHIFT) * 4;
 		obj_size += 8; /* ctxdma header */
 	} else {
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index ed7757f1408..049f755567e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -354,6 +354,15 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->graph.destroy_context	= nv50_graph_destroy_context;
 		engine->graph.load_context	= nv50_graph_load_context;
 		engine->graph.unload_context	= nv50_graph_unload_context;
+		if (dev_priv->chipset != 0x86)
+			engine->graph.tlb_flush	= nv50_graph_tlb_flush;
+		else {
+			/* from what i can see nvidia do this on every
+			 * pre-NVA3 board except NVAC, but, we've only
+			 * ever seen problems on NV86
+			 */
+			engine->graph.tlb_flush	= nv86_graph_tlb_flush;
+		}
 		engine->fifo.channels		= 128;
 		engine->fifo.init		= nv50_fifo_init;
 		engine->fifo.takedown		= nv50_fifo_takedown;
@@ -365,6 +374,7 @@ static int nouveau_init_engine_ptrs(struct drm_device *dev)
 		engine->fifo.destroy_context	= nv50_fifo_destroy_context;
 		engine->fifo.load_context	= nv50_fifo_load_context;
 		engine->fifo.unload_context	= nv50_fifo_unload_context;
+		engine->fifo.tlb_flush		= nv50_fifo_tlb_flush;
 		engine->display.early_init	= nv50_display_early_init;
 		engine->display.late_takedown	= nv50_display_late_takedown;
 		engine->display.create		= nv50_display_create;
@@ -1041,6 +1051,9 @@ int nouveau_ioctl_getparam(struct drm_device *dev, void *data,
 	case NOUVEAU_GETPARAM_PTIMER_TIME:
 		getparam->value = dev_priv->engine.timer.read(dev);
 		break;
+	case NOUVEAU_GETPARAM_HAS_BO_USAGE:
+		getparam->value = 1;
+		break;
 	case NOUVEAU_GETPARAM_GRAPH_UNITS:
 		/* NV40 and NV50 versions are quite different, but register
 		 * address is the same. User is supposed to know the card
@@ -1051,7 +1064,7 @@ int nouveau_ioctl_getparam(struct drm_device *dev, void *data,
 		}
 		/* FALLTHRU */
 	default:
-		NV_ERROR(dev, "unknown parameter %lld\n", getparam->param);
+		NV_DEBUG(dev, "unknown parameter %lld\n", getparam->param);
 		return -EINVAL;
 	}
 
@@ -1066,7 +1079,7 @@ nouveau_ioctl_setparam(struct drm_device *dev, void *data,
 
 	switch (setparam->param) {
 	default:
-		NV_ERROR(dev, "unknown parameter %lld\n", setparam->param);
+		NV_DEBUG(dev, "unknown parameter %lld\n", setparam->param);
 		return -EINVAL;
 	}
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_temp.c b/drivers/gpu/drm/nouveau/nouveau_temp.c
index 16bbbf1eff6..7ecc4adc1e4 100644
--- a/drivers/gpu/drm/nouveau/nouveau_temp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_temp.c
@@ -191,7 +191,7 @@ nv40_temp_get(struct drm_device *dev)
 	int offset = sensor->offset_mult / sensor->offset_div;
 	int core_temp;
 
-	if (dev_priv->chipset >= 0x50) {
+	if (dev_priv->card_type >= NV_50) {
 		core_temp = nv_rd32(dev, 0x20008);
 	} else {
 		core_temp = nv_rd32(dev, 0x0015b4) & 0x1fff;
diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c
index c71abc2a34d..40e18074162 100644
--- a/drivers/gpu/drm/nouveau/nv04_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv04_crtc.c
@@ -158,7 +158,6 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode)
 {
 	struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
 	struct drm_device *dev = crtc->dev;
-	struct drm_connector *connector;
 	unsigned char seq1 = 0, crtc17 = 0;
 	unsigned char crtc1A;
 
@@ -213,10 +212,6 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode)
 	NVVgaSeqReset(dev, nv_crtc->index, false);
 
 	NVWriteVgaCrtc(dev, nv_crtc->index, NV_CIO_CRE_RPC1_INDEX, crtc1A);
-
-	/* Update connector polling modes */
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
-		nouveau_connector_set_polling(connector);
 }
 
 static bool
@@ -831,7 +826,7 @@ nv04_crtc_do_mode_set_base(struct drm_crtc *crtc,
 	/* Update the framebuffer location. */
 	regp->fb_start = nv_crtc->fb.offset & ~3;
 	regp->fb_start += (y * drm_fb->pitch) + (x * drm_fb->bits_per_pixel / 8);
-	NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_START, regp->fb_start);
+	nv_set_crtc_base(dev, nv_crtc->index, regp->fb_start);
 
 	/* Update the arbitration parameters. */
 	nouveau_calc_arb(dev, crtc->mode.clock, drm_fb->bits_per_pixel,
diff --git a/drivers/gpu/drm/nouveau/nv04_dfp.c b/drivers/gpu/drm/nouveau/nv04_dfp.c
index c936403b26e..ef23550407b 100644
--- a/drivers/gpu/drm/nouveau/nv04_dfp.c
+++ b/drivers/gpu/drm/nouveau/nv04_dfp.c
@@ -185,14 +185,15 @@ static bool nv04_dfp_mode_fixup(struct drm_encoder *encoder,
 	struct nouveau_encoder *nv_encoder = nouveau_encoder(encoder);
 	struct nouveau_connector *nv_connector = nouveau_encoder_connector_get(nv_encoder);
 
-	/* For internal panels and gpu scaling on DVI we need the native mode */
-	if (nv_connector->scaling_mode != DRM_MODE_SCALE_NONE) {
-		if (!nv_connector->native_mode)
-			return false;
+	if (!nv_connector->native_mode ||
+	    nv_connector->scaling_mode == DRM_MODE_SCALE_NONE ||
+	    mode->hdisplay > nv_connector->native_mode->hdisplay ||
+	    mode->vdisplay > nv_connector->native_mode->vdisplay) {
+		nv_encoder->mode = *adjusted_mode;
+
+	} else {
 		nv_encoder->mode = *nv_connector->native_mode;
 		adjusted_mode->clock = nv_connector->native_mode->clock;
-	} else {
-		nv_encoder->mode = *adjusted_mode;
 	}
 
 	return true;
diff --git a/drivers/gpu/drm/nouveau/nv04_pm.c b/drivers/gpu/drm/nouveau/nv04_pm.c
index 6a6eb697d38..eb1c70dd82e 100644
--- a/drivers/gpu/drm/nouveau/nv04_pm.c
+++ b/drivers/gpu/drm/nouveau/nv04_pm.c
@@ -76,6 +76,15 @@ nv04_pm_clock_set(struct drm_device *dev, void *pre_state)
 		reg += 4;
 
 	nouveau_hw_setpll(dev, reg, &state->calc);
+
+	if (dev_priv->card_type < NV_30 && reg == NV_PRAMDAC_MPLL_COEFF) {
+		if (dev_priv->card_type == NV_20)
+			nv_mask(dev, 0x1002c4, 0, 1 << 20);
+
+		/* Reset the DLLs */
+		nv_mask(dev, 0x1002c0, 0, 1 << 8);
+	}
+
 	kfree(state);
 }
 
diff --git a/drivers/gpu/drm/nouveau/nv50_calc.c b/drivers/gpu/drm/nouveau/nv50_calc.c
index 2cdc2bfe717..de81151648f 100644
--- a/drivers/gpu/drm/nouveau/nv50_calc.c
+++ b/drivers/gpu/drm/nouveau/nv50_calc.c
@@ -51,24 +51,28 @@ nv50_calc_pll2(struct drm_device *dev, struct pll_lims *pll, int clk,
 	       int *N, int *fN, int *M, int *P)
 {
 	fixed20_12 fb_div, a, b;
+	u32 refclk = pll->refclk / 10;
+	u32 max_vco_freq = pll->vco1.maxfreq / 10;
+	u32 max_vco_inputfreq = pll->vco1.max_inputfreq / 10;
+	clk /= 10;
 
-	*P = pll->vco1.maxfreq / clk;
+	*P = max_vco_freq / clk;
 	if (*P > pll->max_p)
 		*P = pll->max_p;
 	if (*P < pll->min_p)
 		*P = pll->min_p;
 
-	/* *M = ceil(refclk / pll->vco.max_inputfreq); */
-	a.full = dfixed_const(pll->refclk);
-	b.full = dfixed_const(pll->vco1.max_inputfreq);
+	/* *M = floor((refclk + max_vco_inputfreq) / max_vco_inputfreq); */
+	a.full = dfixed_const(refclk + max_vco_inputfreq);
+	b.full = dfixed_const(max_vco_inputfreq);
 	a.full = dfixed_div(a, b);
-	a.full = dfixed_ceil(a);
+	a.full = dfixed_floor(a);
 	*M = dfixed_trunc(a);
 
 	/* fb_div = (vco * *M) / refclk; */
 	fb_div.full = dfixed_const(clk * *P);
 	fb_div.full = dfixed_mul(fb_div, a);
-	a.full = dfixed_const(pll->refclk);
+	a.full = dfixed_const(refclk);
 	fb_div.full = dfixed_div(fb_div, a);
 
 	/* *N = floor(fb_div); */
diff --git a/drivers/gpu/drm/nouveau/nv50_crtc.c b/drivers/gpu/drm/nouveau/nv50_crtc.c
index 16380d52cd8..56476d0c6de 100644
--- a/drivers/gpu/drm/nouveau/nv50_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv50_crtc.c
@@ -546,7 +546,7 @@ nv50_crtc_do_mode_set_base(struct drm_crtc *crtc,
 	}
 
 	nv_crtc->fb.offset = fb->nvbo->bo.offset - dev_priv->vm_vram_base;
-	nv_crtc->fb.tile_flags = fb->nvbo->tile_flags;
+	nv_crtc->fb.tile_flags = nouveau_bo_tile_layout(fb->nvbo);
 	nv_crtc->fb.cpp = drm_fb->bits_per_pixel / 8;
 	if (!nv_crtc->fb.blanked && dev_priv->chipset != 0x50) {
 		ret = RING_SPACE(evo, 2);
@@ -578,7 +578,7 @@ nv50_crtc_do_mode_set_base(struct drm_crtc *crtc,
 				  fb->nvbo->tile_mode);
 	}
 	if (dev_priv->chipset == 0x50)
-		OUT_RING(evo, (fb->nvbo->tile_flags << 8) | format);
+		OUT_RING(evo, (nv_crtc->fb.tile_flags << 8) | format);
 	else
 		OUT_RING(evo, format);
 
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index 55c9663ef2b..f624c611dde 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -1032,11 +1032,18 @@ nv50_display_irq_hotplug_bh(struct work_struct *work)
 	struct drm_connector *connector;
 	const uint32_t gpio_reg[4] = { 0xe104, 0xe108, 0xe280, 0xe284 };
 	uint32_t unplug_mask, plug_mask, change_mask;
-	uint32_t hpd0, hpd1 = 0;
+	uint32_t hpd0, hpd1;
 
-	hpd0 = nv_rd32(dev, 0xe054) & nv_rd32(dev, 0xe050);
+	spin_lock_irq(&dev_priv->hpd_state.lock);
+	hpd0 = dev_priv->hpd_state.hpd0_bits;
+	dev_priv->hpd_state.hpd0_bits = 0;
+	hpd1 = dev_priv->hpd_state.hpd1_bits;
+	dev_priv->hpd_state.hpd1_bits = 0;
+	spin_unlock_irq(&dev_priv->hpd_state.lock);
+
+	hpd0 &= nv_rd32(dev, 0xe050);
 	if (dev_priv->chipset >= 0x90)
-		hpd1 = nv_rd32(dev, 0xe074) & nv_rd32(dev, 0xe070);
+		hpd1 &= nv_rd32(dev, 0xe070);
 
 	plug_mask   = (hpd0 & 0x0000ffff) | (hpd1 << 16);
 	unplug_mask = (hpd0 >> 16) | (hpd1 & 0xffff0000);
@@ -1078,10 +1085,6 @@ nv50_display_irq_hotplug_bh(struct work_struct *work)
 			helper->dpms(connector->encoder, DRM_MODE_DPMS_OFF);
 	}
 
-	nv_wr32(dev, 0xe054, nv_rd32(dev, 0xe054));
-	if (dev_priv->chipset >= 0x90)
-		nv_wr32(dev, 0xe074, nv_rd32(dev, 0xe074));
-
 	drm_helper_hpd_irq_event(dev);
 }
 
@@ -1092,8 +1095,22 @@ nv50_display_irq_handler(struct drm_device *dev)
 	uint32_t delayed = 0;
 
 	if (nv_rd32(dev, NV50_PMC_INTR_0) & NV50_PMC_INTR_0_HOTPLUG) {
-		if (!work_pending(&dev_priv->hpd_work))
-			queue_work(dev_priv->wq, &dev_priv->hpd_work);
+		uint32_t hpd0_bits, hpd1_bits = 0;
+
+		hpd0_bits = nv_rd32(dev, 0xe054);
+		nv_wr32(dev, 0xe054, hpd0_bits);
+
+		if (dev_priv->chipset >= 0x90) {
+			hpd1_bits = nv_rd32(dev, 0xe074);
+			nv_wr32(dev, 0xe074, hpd1_bits);
+		}
+
+		spin_lock(&dev_priv->hpd_state.lock);
+		dev_priv->hpd_state.hpd0_bits |= hpd0_bits;
+		dev_priv->hpd_state.hpd1_bits |= hpd1_bits;
+		spin_unlock(&dev_priv->hpd_state.lock);
+
+		queue_work(dev_priv->wq, &dev_priv->hpd_work);
 	}
 
 	while (nv_rd32(dev, NV50_PMC_INTR_0) & NV50_PMC_INTR_0_DISPLAY) {
diff --git a/drivers/gpu/drm/nouveau/nv50_fifo.c b/drivers/gpu/drm/nouveau/nv50_fifo.c
index a46a961102f..1da65bd60c1 100644
--- a/drivers/gpu/drm/nouveau/nv50_fifo.c
+++ b/drivers/gpu/drm/nouveau/nv50_fifo.c
@@ -464,3 +464,8 @@ nv50_fifo_unload_context(struct drm_device *dev)
 	return 0;
 }
 
+void
+nv50_fifo_tlb_flush(struct drm_device *dev)
+{
+	nv50_vm_flush(dev, 5);
+}
diff --git a/drivers/gpu/drm/nouveau/nv50_graph.c b/drivers/gpu/drm/nouveau/nv50_graph.c
index cbf5ae2f67d..8b669d0af61 100644
--- a/drivers/gpu/drm/nouveau/nv50_graph.c
+++ b/drivers/gpu/drm/nouveau/nv50_graph.c
@@ -402,3 +402,55 @@ struct nouveau_pgraph_object_class nv50_graph_grclass[] = {
 	{ 0x8597, false, NULL }, /* tesla (nva3, nva5, nva8) */
 	{}
 };
+
+void
+nv50_graph_tlb_flush(struct drm_device *dev)
+{
+	nv50_vm_flush(dev, 0);
+}
+
+void
+nv86_graph_tlb_flush(struct drm_device *dev)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_timer_engine *ptimer = &dev_priv->engine.timer;
+	bool idle, timeout = false;
+	unsigned long flags;
+	u64 start;
+	u32 tmp;
+
+	spin_lock_irqsave(&dev_priv->context_switch_lock, flags);
+	nv_mask(dev, 0x400500, 0x00000001, 0x00000000);
+
+	start = ptimer->read(dev);
+	do {
+		idle = true;
+
+		for (tmp = nv_rd32(dev, 0x400380); tmp && idle; tmp >>= 3) {
+			if ((tmp & 7) == 1)
+				idle = false;
+		}
+
+		for (tmp = nv_rd32(dev, 0x400384); tmp && idle; tmp >>= 3) {
+			if ((tmp & 7) == 1)
+				idle = false;
+		}
+
+		for (tmp = nv_rd32(dev, 0x400388); tmp && idle; tmp >>= 3) {
+			if ((tmp & 7) == 1)
+				idle = false;
+		}
+	} while (!idle && !(timeout = ptimer->read(dev) - start > 2000000000));
+
+	if (timeout) {
+		NV_ERROR(dev, "PGRAPH TLB flush idle timeout fail: "
+			      "0x%08x 0x%08x 0x%08x 0x%08x\n",
+			 nv_rd32(dev, 0x400700), nv_rd32(dev, 0x400380),
+			 nv_rd32(dev, 0x400384), nv_rd32(dev, 0x400388));
+	}
+
+	nv50_vm_flush(dev, 0);
+
+	nv_mask(dev, 0x400500, 0x00000001, 0x00000001);
+	spin_unlock_irqrestore(&dev_priv->context_switch_lock, flags);
+}
diff --git a/drivers/gpu/drm/nouveau/nv50_instmem.c b/drivers/gpu/drm/nouveau/nv50_instmem.c
index a53fc974332..b773229b764 100644
--- a/drivers/gpu/drm/nouveau/nv50_instmem.c
+++ b/drivers/gpu/drm/nouveau/nv50_instmem.c
@@ -402,7 +402,6 @@ nv50_instmem_bind(struct drm_device *dev, struct nouveau_gpuobj *gpuobj)
 	}
 	dev_priv->engine.instmem.flush(dev);
 
-	nv50_vm_flush(dev, 4);
 	nv50_vm_flush(dev, 6);
 
 	gpuobj->im_bound = 1;
diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c
index 8e421f644a5..05efb5b9f13 100644
--- a/drivers/gpu/drm/radeon/atom.c
+++ b/drivers/gpu/drm/radeon/atom.c
@@ -112,6 +112,7 @@ static uint32_t atom_iio_execute(struct atom_context *ctx, int base,
 			base += 3;
 			break;
 		case ATOM_IIO_WRITE:
+			(void)ctx->card->ioreg_read(ctx->card, CU16(base + 1));
 			ctx->card->ioreg_write(ctx->card, CU16(base + 1), temp);
 			base += 3;
 			break;
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index df2b6f2b35f..9fbabaa6ee4 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -253,7 +253,8 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode)
 	case DRM_MODE_DPMS_SUSPEND:
 	case DRM_MODE_DPMS_OFF:
 		drm_vblank_pre_modeset(dev, radeon_crtc->crtc_id);
-		atombios_blank_crtc(crtc, ATOM_ENABLE);
+		if (radeon_crtc->enabled)
+			atombios_blank_crtc(crtc, ATOM_ENABLE);
 		if (ASIC_IS_DCE3(rdev))
 			atombios_enable_crtc_memreq(crtc, ATOM_DISABLE);
 		atombios_enable_crtc(crtc, ATOM_DISABLE);
@@ -530,7 +531,7 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 					dp_clock = dig_connector->dp_clock;
 				}
 			}
-
+#if 0 /* doesn't work properly on some laptops */
 			/* use recommended ref_div for ss */
 			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
 				if (ss_enabled) {
@@ -540,7 +541,7 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc,
 					}
 				}
 			}
-
+#endif
 			if (ASIC_IS_AVIVO(rdev)) {
 				/* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */
 				if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index f12a5b3ec05..7b337c361a1 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -748,6 +748,8 @@ void evergreen_pcie_gart_tlb_flush(struct radeon_device *rdev)
 	unsigned i;
 	u32 tmp;
 
+	WREG32(HDP_MEM_COHERENCY_FLUSH_CNTL, 0x1);
+
 	WREG32(VM_CONTEXT0_REQUEST_RESPONSE, REQUEST_TYPE(1));
 	for (i = 0; i < rdev->usec_timeout; i++) {
 		/* read MC_STATUS */
@@ -1650,7 +1652,36 @@ static void evergreen_gpu_init(struct radeon_device *rdev)
 		}
 	}
 
-	rdev->config.evergreen.tile_config = gb_addr_config;
+	/* setup tiling info dword.  gb_addr_config is not adequate since it does
+	 * not have bank info, so create a custom tiling dword.
+	 * bits 3:0   num_pipes
+	 * bits 7:4   num_banks
+	 * bits 11:8  group_size
+	 * bits 15:12 row_size
+	 */
+	rdev->config.evergreen.tile_config = 0;
+	switch (rdev->config.evergreen.max_tile_pipes) {
+	case 1:
+	default:
+		rdev->config.evergreen.tile_config |= (0 << 0);
+		break;
+	case 2:
+		rdev->config.evergreen.tile_config |= (1 << 0);
+		break;
+	case 4:
+		rdev->config.evergreen.tile_config |= (2 << 0);
+		break;
+	case 8:
+		rdev->config.evergreen.tile_config |= (3 << 0);
+		break;
+	}
+	rdev->config.evergreen.tile_config |=
+		((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT) << 4;
+	rdev->config.evergreen.tile_config |=
+		((mc_arb_ramcfg & BURSTLENGTH_MASK) >> BURSTLENGTH_SHIFT) << 8;
+	rdev->config.evergreen.tile_config |=
+		((gb_addr_config & 0x30000000) >> 28) << 12;
+
 	WREG32(GB_BACKEND_MAP, gb_backend_map);
 	WREG32(GB_ADDR_CONFIG, gb_addr_config);
 	WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
@@ -1893,7 +1924,6 @@ bool evergreen_gpu_is_lockup(struct radeon_device *rdev)
 static int evergreen_gpu_soft_reset(struct radeon_device *rdev)
 {
 	struct evergreen_mc_save save;
-	u32 srbm_reset = 0;
 	u32 grbm_reset = 0;
 
 	dev_info(rdev->dev, "GPU softreset \n");
@@ -1932,16 +1962,6 @@ static int evergreen_gpu_soft_reset(struct radeon_device *rdev)
 	udelay(50);
 	WREG32(GRBM_SOFT_RESET, 0);
 	(void)RREG32(GRBM_SOFT_RESET);
-
-	/* reset all the system blocks */
-	srbm_reset = SRBM_SOFT_RESET_ALL_MASK;
-
-	dev_info(rdev->dev, "  SRBM_SOFT_RESET=0x%08X\n", srbm_reset);
-	WREG32(SRBM_SOFT_RESET, srbm_reset);
-	(void)RREG32(SRBM_SOFT_RESET);
-	udelay(50);
-	WREG32(SRBM_SOFT_RESET, 0);
-	(void)RREG32(SRBM_SOFT_RESET);
 	/* Wait a little for things to settle down */
 	udelay(50);
 	dev_info(rdev->dev, "  GRBM_STATUS=0x%08X\n",
@@ -1952,10 +1972,6 @@ static int evergreen_gpu_soft_reset(struct radeon_device *rdev)
 		RREG32(GRBM_STATUS_SE1));
 	dev_info(rdev->dev, "  SRBM_STATUS=0x%08X\n",
 		RREG32(SRBM_STATUS));
-	/* After reset we need to reinit the asic as GPU often endup in an
-	 * incoherent state.
-	 */
-	atom_asic_init(rdev->mode_info.atom_context);
 	evergreen_mc_resume(rdev, &save);
 	return 0;
 }
@@ -2033,7 +2049,7 @@ int evergreen_irq_set(struct radeon_device *rdev)
 	u32 grbm_int_cntl = 0;
 
 	if (!rdev->irq.installed) {
-		WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+		WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
 		return -EINVAL;
 	}
 	/* don't enable anything if the ih is disabled */
@@ -2295,6 +2311,7 @@ restart_ih:
 			case 0: /* D1 vblank */
 				if (disp_int & LB_D1_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 0);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int &= ~LB_D1_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D1 vblank\n");
@@ -2316,6 +2333,7 @@ restart_ih:
 			case 0: /* D2 vblank */
 				if (disp_int_cont & LB_D2_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 1);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int_cont &= ~LB_D2_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D2 vblank\n");
@@ -2337,6 +2355,7 @@ restart_ih:
 			case 0: /* D3 vblank */
 				if (disp_int_cont2 & LB_D3_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 2);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int_cont2 &= ~LB_D3_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D3 vblank\n");
@@ -2358,6 +2377,7 @@ restart_ih:
 			case 0: /* D4 vblank */
 				if (disp_int_cont3 & LB_D4_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 3);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int_cont3 &= ~LB_D4_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D4 vblank\n");
@@ -2379,6 +2399,7 @@ restart_ih:
 			case 0: /* D5 vblank */
 				if (disp_int_cont4 & LB_D5_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 4);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int_cont4 &= ~LB_D5_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D5 vblank\n");
@@ -2400,6 +2421,7 @@ restart_ih:
 			case 0: /* D6 vblank */
 				if (disp_int_cont5 & LB_D6_VBLANK_INTERRUPT) {
 					drm_handle_vblank(rdev->ddev, 5);
+					rdev->pm.vblank_sync = true;
 					wake_up(&rdev->irq.vblank_queue);
 					disp_int_cont5 &= ~LB_D6_VBLANK_INTERRUPT;
 					DRM_DEBUG("IH: D6 vblank\n");
@@ -2561,6 +2583,11 @@ int evergreen_resume(struct radeon_device *rdev)
 {
 	int r;
 
+	/* reset the asic, the gfx blocks are often in a bad state
+	 * after the driver is unloaded or after a resume
+	 */
+	if (radeon_asic_reset(rdev))
+		dev_warn(rdev->dev, "GPU reset failed !\n");
 	/* Do not reset GPU before posting, on rv770 hw unlike on r500 hw,
 	 * posting will perform necessary task to bring back GPU into good
 	 * shape.
@@ -2677,6 +2704,11 @@ int evergreen_init(struct radeon_device *rdev)
 	r = radeon_atombios_init(rdev);
 	if (r)
 		return r;
+	/* reset the asic, the gfx blocks are often in a bad state
+	 * after the driver is unloaded or after a resume
+	 */
+	if (radeon_asic_reset(rdev))
+		dev_warn(rdev->dev, "GPU reset failed !\n");
 	/* Post card if necessary */
 	if (!evergreen_card_posted(rdev)) {
 		if (!rdev->bios) {
diff --git a/drivers/gpu/drm/radeon/evergreen_blit_kms.c b/drivers/gpu/drm/radeon/evergreen_blit_kms.c
index ac3b6dde23d..e0e590110dd 100644
--- a/drivers/gpu/drm/radeon/evergreen_blit_kms.c
+++ b/drivers/gpu/drm/radeon/evergreen_blit_kms.c
@@ -459,7 +459,7 @@ int evergreen_blit_init(struct radeon_device *rdev)
 	obj_size += evergreen_ps_size * 4;
 	obj_size = ALIGN(obj_size, 256);
 
-	r = radeon_bo_create(rdev, NULL, obj_size, true, RADEON_GEM_DOMAIN_VRAM,
+	r = radeon_bo_create(rdev, NULL, obj_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
 				&rdev->r600_blit.shader_obj);
 	if (r) {
 		DRM_ERROR("evergreen failed to allocate shader\n");
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index 113c70cc8b3..a73b53c4435 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -174,6 +174,7 @@
 #define	HDP_NONSURFACE_BASE				0x2C04
 #define	HDP_NONSURFACE_INFO				0x2C08
 #define	HDP_NONSURFACE_SIZE				0x2C0C
+#define HDP_MEM_COHERENCY_FLUSH_CNTL			0x5480
 #define HDP_REG_COHERENCY_FLUSH_CNTL			0x54A0
 #define	HDP_TILING_CONFIG				0x2F3C
 
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index 0e8f28a6892..8e10aa9f74b 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -442,7 +442,7 @@ int r100_pci_gart_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->gart.table.ram.ptr) {
-		WARN(1, "R100 PCI GART already initialized.\n");
+		WARN(1, "R100 PCI GART already initialized\n");
 		return 0;
 	}
 	/* Initialize common gart structure */
@@ -516,7 +516,7 @@ int r100_irq_set(struct radeon_device *rdev)
 	uint32_t tmp = 0;
 
 	if (!rdev->irq.installed) {
-		WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+		WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
 		WREG32(R_000040_GEN_INT_CNTL, 0);
 		return -EINVAL;
 	}
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 34527e600fe..cde1d3480d9 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -91,7 +91,7 @@ int rv370_pcie_gart_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->gart.table.vram.robj) {
-		WARN(1, "RV370 PCIE GART already initialized.\n");
+		WARN(1, "RV370 PCIE GART already initialized\n");
 		return 0;
 	}
 	/* Initialize common gart structure */
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 33952a12f0a..9c92db7c896 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -97,14 +97,8 @@ u32 rv6xx_get_temp(struct radeon_device *rdev)
 {
 	u32 temp = (RREG32(CG_THERMAL_STATUS) & ASIC_T_MASK) >>
 		ASIC_T_SHIFT;
-	u32 actual_temp = 0;
 
-	if ((temp >> 7) & 1)
-		actual_temp = 0;
-	else
-		actual_temp = (temp >> 1) & 0xff;
-
-	return actual_temp * 1000;
+	return temp * 1000;
 }
 
 void r600_pm_get_dynpm_state(struct radeon_device *rdev)
@@ -884,12 +878,15 @@ void r600_pcie_gart_tlb_flush(struct radeon_device *rdev)
 	u32 tmp;
 
 	/* flush hdp cache so updates hit vram */
-	if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) {
+	if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
+	    !(rdev->flags & RADEON_IS_AGP)) {
 		void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
 		u32 tmp;
 
 		/* r7xx hw bug.  write to HDP_DEBUG1 followed by fb read
 		 * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
+		 * This seems to cause problems on some AGP cards. Just use the old
+		 * method for them.
 		 */
 		WREG32(HDP_DEBUG1, 0);
 		tmp = readl((void __iomem *)ptr);
@@ -919,7 +916,7 @@ int r600_pcie_gart_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->gart.table.vram.robj) {
-		WARN(1, "R600 PCIE GART already initialized.\n");
+		WARN(1, "R600 PCIE GART already initialized\n");
 		return 0;
 	}
 	/* Initialize common gart structure */
@@ -1201,8 +1198,10 @@ void r600_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
 				mc->vram_end, mc->real_vram_size >> 20);
 	} else {
 		u64 base = 0;
-		if (rdev->flags & RADEON_IS_IGP)
-			base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
+		if (rdev->flags & RADEON_IS_IGP) {
+			base = RREG32(MC_VM_FB_LOCATION) & 0xFFFF;
+			base <<= 24;
+		}
 		radeon_vram_location(rdev, &rdev->mc, base);
 		rdev->mc.gtt_base_align = 0;
 		radeon_gtt_location(rdev, mc);
@@ -1343,13 +1342,19 @@ bool r600_gpu_is_lockup(struct radeon_device *rdev)
 	u32 srbm_status;
 	u32 grbm_status;
 	u32 grbm_status2;
+	struct r100_gpu_lockup *lockup;
 	int r;
 
+	if (rdev->family >= CHIP_RV770)
+		lockup = &rdev->config.rv770.lockup;
+	else
+		lockup = &rdev->config.r600.lockup;
+
 	srbm_status = RREG32(R_000E50_SRBM_STATUS);
 	grbm_status = RREG32(R_008010_GRBM_STATUS);
 	grbm_status2 = RREG32(R_008014_GRBM_STATUS2);
 	if (!G_008010_GUI_ACTIVE(grbm_status)) {
-		r100_gpu_lockup_update(&rdev->config.r300.lockup, &rdev->cp);
+		r100_gpu_lockup_update(lockup, &rdev->cp);
 		return false;
 	}
 	/* force CP activities */
@@ -1361,7 +1366,7 @@ bool r600_gpu_is_lockup(struct radeon_device *rdev)
 		radeon_ring_unlock_commit(rdev);
 	}
 	rdev->cp.rptr = RREG32(R600_CP_RB_RPTR);
-	return r100_gpu_cp_is_lockup(rdev, &rdev->config.r300.lockup, &rdev->cp);
+	return r100_gpu_cp_is_lockup(rdev, lockup, &rdev->cp);
 }
 
 int r600_asic_reset(struct radeon_device *rdev)
@@ -2724,7 +2729,7 @@ static int r600_ih_ring_alloc(struct radeon_device *rdev)
 	/* Allocate ring buffer */
 	if (rdev->ih.ring_obj == NULL) {
 		r = radeon_bo_create(rdev, NULL, rdev->ih.ring_size,
-				     true,
+				     PAGE_SIZE, true,
 				     RADEON_GEM_DOMAIN_GTT,
 				     &rdev->ih.ring_obj);
 		if (r) {
@@ -2995,7 +3000,7 @@ int r600_irq_set(struct radeon_device *rdev)
 	u32 hdmi1, hdmi2;
 
 	if (!rdev->irq.installed) {
-		WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+		WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
 		return -EINVAL;
 	}
 	/* don't enable anything if the ih is disabled */
@@ -3489,10 +3494,12 @@ int r600_debugfs_mc_info_init(struct radeon_device *rdev)
 void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo)
 {
 	/* r7xx hw bug.  write to HDP_DEBUG1 followed by fb read
-	 * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
+	 * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL.
+	 * This seems to cause problems on some AGP cards. Just use the old
+	 * method for them.
 	 */
 	if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
-	    rdev->vram_scratch.ptr) {
+	    rdev->vram_scratch.ptr && !(rdev->flags & RADEON_IS_AGP)) {
 		void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
 		u32 tmp;
 
diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c
index 8362974ef41..86e5aa07f0d 100644
--- a/drivers/gpu/drm/radeon/r600_blit_kms.c
+++ b/drivers/gpu/drm/radeon/r600_blit_kms.c
@@ -501,7 +501,7 @@ int r600_blit_init(struct radeon_device *rdev)
 	obj_size += r6xx_ps_size * 4;
 	obj_size = ALIGN(obj_size, 256);
 
-	r = radeon_bo_create(rdev, NULL, obj_size, true, RADEON_GEM_DOMAIN_VRAM,
+	r = radeon_bo_create(rdev, NULL, obj_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
 				&rdev->r600_blit.shader_obj);
 	if (r) {
 		DRM_ERROR("r600 failed to allocate shader\n");
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 37cc2aa9f92..7831e089021 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -50,6 +50,7 @@ struct r600_cs_track {
 	u32			nsamples;
 	u32			cb_color_base_last[8];
 	struct radeon_bo	*cb_color_bo[8];
+	u64			cb_color_bo_mc[8];
 	u32			cb_color_bo_offset[8];
 	struct radeon_bo	*cb_color_frag_bo[8];
 	struct radeon_bo	*cb_color_tile_bo[8];
@@ -67,6 +68,7 @@ struct r600_cs_track {
 	u32			db_depth_size;
 	u32			db_offset;
 	struct radeon_bo	*db_bo;
+	u64			db_bo_mc;
 };
 
 static inline int r600_bpe_from_format(u32 *bpe, u32 format)
@@ -140,6 +142,68 @@ static inline int r600_bpe_from_format(u32 *bpe, u32 format)
 	return 0;
 }
 
+struct array_mode_checker {
+	int array_mode;
+	u32 group_size;
+	u32 nbanks;
+	u32 npipes;
+	u32 nsamples;
+	u32 bpe;
+};
+
+/* returns alignment in pixels for pitch/height/depth and bytes for base */
+static inline int r600_get_array_mode_alignment(struct array_mode_checker *values,
+						u32 *pitch_align,
+						u32 *height_align,
+						u32 *depth_align,
+						u64 *base_align)
+{
+	u32 tile_width = 8;
+	u32 tile_height = 8;
+	u32 macro_tile_width = values->nbanks;
+	u32 macro_tile_height = values->npipes;
+	u32 tile_bytes = tile_width * tile_height * values->bpe * values->nsamples;
+	u32 macro_tile_bytes = macro_tile_width * macro_tile_height * tile_bytes;
+
+	switch (values->array_mode) {
+	case ARRAY_LINEAR_GENERAL:
+		/* technically tile_width/_height for pitch/height */
+		*pitch_align = 1; /* tile_width */
+		*height_align = 1; /* tile_height */
+		*depth_align = 1;
+		*base_align = 1;
+		break;
+	case ARRAY_LINEAR_ALIGNED:
+		*pitch_align = max((u32)64, (u32)(values->group_size / values->bpe));
+		*height_align = tile_height;
+		*depth_align = 1;
+		*base_align = values->group_size;
+		break;
+	case ARRAY_1D_TILED_THIN1:
+		*pitch_align = max((u32)tile_width,
+				   (u32)(values->group_size /
+					 (tile_height * values->bpe * values->nsamples)));
+		*height_align = tile_height;
+		*depth_align = 1;
+		*base_align = values->group_size;
+		break;
+	case ARRAY_2D_TILED_THIN1:
+		*pitch_align = max((u32)macro_tile_width,
+				  (u32)(((values->group_size / tile_height) /
+					 (values->bpe * values->nsamples)) *
+					values->nbanks)) * tile_width;
+		*height_align = macro_tile_height * tile_height;
+		*depth_align = 1;
+		*base_align = max(macro_tile_bytes,
+				  (*pitch_align) * values->bpe * (*height_align) * values->nsamples);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static void r600_cs_track_init(struct r600_cs_track *track)
 {
 	int i;
@@ -153,10 +217,12 @@ static void r600_cs_track_init(struct r600_cs_track *track)
 		track->cb_color_info[i] = 0;
 		track->cb_color_bo[i] = NULL;
 		track->cb_color_bo_offset[i] = 0xFFFFFFFF;
+		track->cb_color_bo_mc[i] = 0xFFFFFFFF;
 	}
 	track->cb_target_mask = 0xFFFFFFFF;
 	track->cb_shader_mask = 0xFFFFFFFF;
 	track->db_bo = NULL;
+	track->db_bo_mc = 0xFFFFFFFF;
 	/* assume the biggest format and that htile is enabled */
 	track->db_depth_info = 7 | (1 << 25);
 	track->db_depth_view = 0xFFFFC000;
@@ -168,7 +234,10 @@ static void r600_cs_track_init(struct r600_cs_track *track)
 static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 {
 	struct r600_cs_track *track = p->track;
-	u32 bpe = 0, pitch, slice_tile_max, size, tmp, height, pitch_align;
+	u32 bpe = 0, slice_tile_max, size, tmp;
+	u32 height, height_align, pitch, pitch_align, depth_align;
+	u64 base_offset, base_align;
+	struct array_mode_checker array_check;
 	volatile u32 *ib = p->ib->ptr;
 	unsigned array_mode;
 
@@ -183,60 +252,40 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 			i, track->cb_color_info[i]);
 		return -EINVAL;
 	}
-	/* pitch is the number of 8x8 tiles per row */
-	pitch = G_028060_PITCH_TILE_MAX(track->cb_color_size[i]) + 1;
+	/* pitch in pixels */
+	pitch = (G_028060_PITCH_TILE_MAX(track->cb_color_size[i]) + 1) * 8;
 	slice_tile_max = G_028060_SLICE_TILE_MAX(track->cb_color_size[i]) + 1;
 	slice_tile_max *= 64;
-	height = slice_tile_max / (pitch * 8);
+	height = slice_tile_max / pitch;
 	if (height > 8192)
 		height = 8192;
 	array_mode = G_0280A0_ARRAY_MODE(track->cb_color_info[i]);
+
+	base_offset = track->cb_color_bo_mc[i] + track->cb_color_bo_offset[i];
+	array_check.array_mode = array_mode;
+	array_check.group_size = track->group_size;
+	array_check.nbanks = track->nbanks;
+	array_check.npipes = track->npipes;
+	array_check.nsamples = track->nsamples;
+	array_check.bpe = bpe;
+	if (r600_get_array_mode_alignment(&array_check,
+					  &pitch_align, &height_align, &depth_align, &base_align)) {
+		dev_warn(p->dev, "%s invalid tiling %d for %d (0x%08X)\n", __func__,
+			 G_0280A0_ARRAY_MODE(track->cb_color_info[i]), i,
+			 track->cb_color_info[i]);
+		return -EINVAL;
+	}
 	switch (array_mode) {
 	case V_0280A0_ARRAY_LINEAR_GENERAL:
-		/* technically height & 0x7 */
 		break;
 	case V_0280A0_ARRAY_LINEAR_ALIGNED:
-		pitch_align = max((u32)64, (u32)(track->group_size / bpe)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		if (!IS_ALIGNED(height, 8)) {
-			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
-				 __func__, __LINE__, height);
-			return -EINVAL;
-		}
 		break;
 	case V_0280A0_ARRAY_1D_TILED_THIN1:
-		pitch_align = max((u32)8, (u32)(track->group_size / (8 * bpe * track->nsamples))) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
 		/* avoid breaking userspace */
 		if (height > 7)
 			height &= ~0x7;
-		if (!IS_ALIGNED(height, 8)) {
-			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
-				 __func__, __LINE__, height);
-			return -EINVAL;
-		}
 		break;
 	case V_0280A0_ARRAY_2D_TILED_THIN1:
-		pitch_align = max((u32)track->nbanks,
-				  (u32)(((track->group_size / 8) / (bpe * track->nsamples)) * track->nbanks)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
-				__func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		if (!IS_ALIGNED((height / 8), track->npipes)) {
-			dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
-				 __func__, __LINE__, height);
-			return -EINVAL;
-		}
 		break;
 	default:
 		dev_warn(p->dev, "%s invalid tiling %d for %d (0x%08X)\n", __func__,
@@ -244,31 +293,42 @@ static inline int r600_cs_track_validate_cb(struct radeon_cs_parser *p, int i)
 			track->cb_color_info[i]);
 		return -EINVAL;
 	}
+
+	if (!IS_ALIGNED(pitch, pitch_align)) {
+		dev_warn(p->dev, "%s:%d cb pitch (%d) invalid\n",
+			 __func__, __LINE__, pitch);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(height, height_align)) {
+		dev_warn(p->dev, "%s:%d cb height (%d) invalid\n",
+			 __func__, __LINE__, height);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(base_offset, base_align)) {
+		dev_warn(p->dev, "%s offset[%d] 0x%llx not aligned\n", __func__, i, base_offset);
+		return -EINVAL;
+	}
+
 	/* check offset */
-	tmp = height * pitch * 8 * bpe;
+	tmp = height * pitch * bpe;
 	if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) {
 		if (array_mode == V_0280A0_ARRAY_LINEAR_GENERAL) {
 			/* the initial DDX does bad things with the CB size occasionally */
 			/* it rounds up height too far for slice tile max but the BO is smaller */
-			tmp = (height - 7) * 8 * bpe;
-			if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) {
-				dev_warn(p->dev, "%s offset[%d] %d %d %lu too big\n", __func__, i, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i]));
-				return -EINVAL;
-			}
+			/* r600c,g also seem to flush at bad times in some apps resulting in
+			 * bogus values here. So for linear just allow anything to avoid breaking
+			 * broken userspace.
+			 */
 		} else {
 			dev_warn(p->dev, "%s offset[%d] %d %d %lu too big\n", __func__, i, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i]));
 			return -EINVAL;
 		}
 	}
-	if (!IS_ALIGNED(track->cb_color_bo_offset[i], track->group_size)) {
-		dev_warn(p->dev, "%s offset[%d] %d not aligned\n", __func__, i, track->cb_color_bo_offset[i]);
-		return -EINVAL;
-	}
 	/* limit max tile */
-	tmp = (height * pitch * 8) >> 6;
+	tmp = (height * pitch) >> 6;
 	if (tmp < slice_tile_max)
 		slice_tile_max = tmp;
-	tmp = S_028060_PITCH_TILE_MAX(pitch - 1) |
+	tmp = S_028060_PITCH_TILE_MAX((pitch / 8) - 1) |
 		S_028060_SLICE_TILE_MAX(slice_tile_max - 1);
 	ib[track->cb_color_size_idx[i]] = tmp;
 	return 0;
@@ -310,7 +370,12 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 	/* Check depth buffer */
 	if (G_028800_STENCIL_ENABLE(track->db_depth_control) ||
 		G_028800_Z_ENABLE(track->db_depth_control)) {
-		u32 nviews, bpe, ntiles, pitch, pitch_align, height, size, slice_tile_max;
+		u32 nviews, bpe, ntiles, size, slice_tile_max;
+		u32 height, height_align, pitch, pitch_align, depth_align;
+		u64 base_offset, base_align;
+		struct array_mode_checker array_check;
+		int array_mode;
+
 		if (track->db_bo == NULL) {
 			dev_warn(p->dev, "z/stencil with no depth buffer\n");
 			return -EINVAL;
@@ -353,41 +418,34 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 			ib[track->db_depth_size_idx] = S_028000_SLICE_TILE_MAX(tmp - 1) | (track->db_depth_size & 0x3FF);
 		} else {
 			size = radeon_bo_size(track->db_bo);
-			pitch = G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1;
+			/* pitch in pixels */
+			pitch = (G_028000_PITCH_TILE_MAX(track->db_depth_size) + 1) * 8;
 			slice_tile_max = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1;
 			slice_tile_max *= 64;
-			height = slice_tile_max / (pitch * 8);
+			height = slice_tile_max / pitch;
 			if (height > 8192)
 				height = 8192;
-			switch (G_028010_ARRAY_MODE(track->db_depth_info)) {
+			base_offset = track->db_bo_mc + track->db_offset;
+			array_mode = G_028010_ARRAY_MODE(track->db_depth_info);
+			array_check.array_mode = array_mode;
+			array_check.group_size = track->group_size;
+			array_check.nbanks = track->nbanks;
+			array_check.npipes = track->npipes;
+			array_check.nsamples = track->nsamples;
+			array_check.bpe = bpe;
+			if (r600_get_array_mode_alignment(&array_check,
+							  &pitch_align, &height_align, &depth_align, &base_align)) {
+				dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
+					 G_028010_ARRAY_MODE(track->db_depth_info),
+					 track->db_depth_info);
+				return -EINVAL;
+			}
+			switch (array_mode) {
 			case V_028010_ARRAY_1D_TILED_THIN1:
-				pitch_align = (max((u32)8, (u32)(track->group_size / (8 * bpe))) / 8);
-				if (!IS_ALIGNED(pitch, pitch_align)) {
-					dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
-						 __func__, __LINE__, pitch);
-					return -EINVAL;
-				}
 				/* don't break userspace */
 				height &= ~0x7;
-				if (!IS_ALIGNED(height, 8)) {
-					dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
-						 __func__, __LINE__, height);
-					return -EINVAL;
-				}
 				break;
 			case V_028010_ARRAY_2D_TILED_THIN1:
-				pitch_align = max((u32)track->nbanks,
-						  (u32)(((track->group_size / 8) / bpe) * track->nbanks)) / 8;
-				if (!IS_ALIGNED(pitch, pitch_align)) {
-					dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
-						 __func__, __LINE__, pitch);
-					return -EINVAL;
-				}
-				if (!IS_ALIGNED((height / 8), track->npipes)) {
-					dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
-						 __func__, __LINE__, height);
-					return -EINVAL;
-				}
 				break;
 			default:
 				dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
@@ -395,15 +453,27 @@ static int r600_cs_track_check(struct radeon_cs_parser *p)
 					 track->db_depth_info);
 				return -EINVAL;
 			}
-			if (!IS_ALIGNED(track->db_offset, track->group_size)) {
-				dev_warn(p->dev, "%s offset[%d] %d not aligned\n", __func__, i, track->db_offset);
+
+			if (!IS_ALIGNED(pitch, pitch_align)) {
+				dev_warn(p->dev, "%s:%d db pitch (%d) invalid\n",
+					 __func__, __LINE__, pitch);
+				return -EINVAL;
+			}
+			if (!IS_ALIGNED(height, height_align)) {
+				dev_warn(p->dev, "%s:%d db height (%d) invalid\n",
+					 __func__, __LINE__, height);
 				return -EINVAL;
 			}
+			if (!IS_ALIGNED(base_offset, base_align)) {
+				dev_warn(p->dev, "%s offset[%d] 0x%llx not aligned\n", __func__, i, base_offset);
+				return -EINVAL;
+			}
+
 			ntiles = G_028000_SLICE_TILE_MAX(track->db_depth_size) + 1;
 			nviews = G_028004_SLICE_MAX(track->db_depth_view) + 1;
 			tmp = ntiles * bpe * 64 * nviews;
 			if ((tmp + track->db_offset) > radeon_bo_size(track->db_bo)) {
-				dev_warn(p->dev, "z/stencil buffer too small (0x%08X %d %d %d -> %d have %ld)\n",
+				dev_warn(p->dev, "z/stencil buffer too small (0x%08X %d %d %d -> %u have %lu)\n",
 						track->db_depth_size, ntiles, nviews, bpe, tmp + track->db_offset,
 						radeon_bo_size(track->db_bo));
 				return -EINVAL;
@@ -954,6 +1024,7 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx
 		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 		track->cb_color_base_last[tmp] = ib[idx];
 		track->cb_color_bo[tmp] = reloc->robj;
+		track->cb_color_bo_mc[tmp] = reloc->lobj.gpu_offset;
 		break;
 	case DB_DEPTH_BASE:
 		r = r600_cs_packet_next_reloc(p, &reloc);
@@ -965,6 +1036,7 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx
 		track->db_offset = radeon_get_ib_value(p, idx) << 8;
 		ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 		track->db_bo = reloc->robj;
+		track->db_bo_mc = reloc->lobj.gpu_offset;
 		break;
 	case DB_HTILE_DATA_BASE:
 	case SQ_PGM_START_FS:
@@ -1086,16 +1158,25 @@ static void r600_texture_size(unsigned nfaces, unsigned blevel, unsigned nlevels
 static inline int r600_check_texture_resource(struct radeon_cs_parser *p,  u32 idx,
 					      struct radeon_bo *texture,
 					      struct radeon_bo *mipmap,
+					      u64 base_offset,
+					      u64 mip_offset,
 					      u32 tiling_flags)
 {
 	struct r600_cs_track *track = p->track;
 	u32 nfaces, nlevels, blevel, w0, h0, d0, bpe = 0;
-	u32 word0, word1, l0_size, mipmap_size, pitch, pitch_align;
+	u32 word0, word1, l0_size, mipmap_size;
+	u32 height_align, pitch, pitch_align, depth_align;
+	u64 base_align;
+	struct array_mode_checker array_check;
 
 	/* on legacy kernel we don't perform advanced check */
 	if (p->rdev == NULL)
 		return 0;
 
+	/* convert to bytes */
+	base_offset <<= 8;
+	mip_offset <<= 8;
+
 	word0 = radeon_get_ib_value(p, idx + 0);
 	if (tiling_flags & RADEON_TILING_MACRO)
 		word0 |= S_038000_TILE_MODE(V_038000_ARRAY_2D_TILED_THIN1);
@@ -1128,46 +1209,38 @@ static inline int r600_check_texture_resource(struct radeon_cs_parser *p,  u32 i
 		return -EINVAL;
 	}
 
-	pitch = G_038000_PITCH(word0) + 1;
-	switch (G_038000_TILE_MODE(word0)) {
-	case V_038000_ARRAY_LINEAR_GENERAL:
-		pitch_align = 1;
-		/* XXX check height align */
-		break;
-	case V_038000_ARRAY_LINEAR_ALIGNED:
-		pitch_align = max((u32)64, (u32)(track->group_size / bpe)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		/* XXX check height align */
-		break;
-	case V_038000_ARRAY_1D_TILED_THIN1:
-		pitch_align = max((u32)8, (u32)(track->group_size / (8 * bpe))) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
-				 __func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		/* XXX check height align */
-		break;
-	case V_038000_ARRAY_2D_TILED_THIN1:
-		pitch_align = max((u32)track->nbanks,
-				  (u32)(((track->group_size / 8) / bpe) * track->nbanks)) / 8;
-		if (!IS_ALIGNED(pitch, pitch_align)) {
-			dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
-				__func__, __LINE__, pitch);
-			return -EINVAL;
-		}
-		/* XXX check height align */
-		break;
-	default:
-		dev_warn(p->dev, "%s invalid tiling %d (0x%08X)\n", __func__,
-			 G_038000_TILE_MODE(word0), word0);
+	/* pitch in texels */
+	pitch = (G_038000_PITCH(word0) + 1) * 8;
+	array_check.array_mode = G_038000_TILE_MODE(word0);
+	array_check.group_size = track->group_size;
+	array_check.nbanks = track->nbanks;
+	array_check.npipes = track->npipes;
+	array_check.nsamples = 1;
+	array_check.bpe = bpe;
+	if (r600_get_array_mode_alignment(&array_check,
+					  &pitch_align, &height_align, &depth_align, &base_align)) {
+		dev_warn(p->dev, "%s:%d tex array mode (%d) invalid\n",
+			 __func__, __LINE__, G_038000_TILE_MODE(word0));
+		return -EINVAL;
+	}
+
+	/* XXX check height as well... */
+
+	if (!IS_ALIGNED(pitch, pitch_align)) {
+		dev_warn(p->dev, "%s:%d tex pitch (%d) invalid\n",
+			 __func__, __LINE__, pitch);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(base_offset, base_align)) {
+		dev_warn(p->dev, "%s:%d tex base offset (0x%llx) invalid\n",
+			 __func__, __LINE__, base_offset);
+		return -EINVAL;
+	}
+	if (!IS_ALIGNED(mip_offset, base_align)) {
+		dev_warn(p->dev, "%s:%d tex mip offset (0x%llx) invalid\n",
+			 __func__, __LINE__, mip_offset);
 		return -EINVAL;
 	}
-	/* XXX check offset align */
 
 	word0 = radeon_get_ib_value(p, idx + 4);
 	word1 = radeon_get_ib_value(p, idx + 5);
@@ -1402,7 +1475,10 @@ static int r600_packet3_check(struct radeon_cs_parser *p,
 				mip_offset = (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
 				mipmap = reloc->robj;
 				r = r600_check_texture_resource(p,  idx+(i*7)+1,
-								texture, mipmap, reloc->lobj.tiling_flags);
+								texture, mipmap,
+								base_offset + radeon_get_ib_value(p, idx+1+(i*7)+2),
+								mip_offset + radeon_get_ib_value(p, idx+1+(i*7)+3),
+								reloc->lobj.tiling_flags);
 				if (r)
 					return r;
 				ib[idx+1+(i*7)+2] += base_offset;
diff --git a/drivers/gpu/drm/radeon/r600_reg.h b/drivers/gpu/drm/radeon/r600_reg.h
index d84612ae47e..33cda016b08 100644
--- a/drivers/gpu/drm/radeon/r600_reg.h
+++ b/drivers/gpu/drm/radeon/r600_reg.h
@@ -86,6 +86,7 @@
 #define R600_HDP_NONSURFACE_BASE                                0x2c04
 
 #define R600_BUS_CNTL                                           0x5420
+#       define R600_BIOS_ROM_DIS                                (1 << 1)
 #define R600_CONFIG_CNTL                                        0x5424
 #define R600_CONFIG_MEMSIZE                                     0x5428
 #define R600_CONFIG_F0_BASE                                     0x542C
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 966a793e225..bff4dc4f410 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -51,6 +51,12 @@
 #define PTE_READABLE				(1 << 5)
 #define PTE_WRITEABLE				(1 << 6)
 
+/* tiling bits */
+#define     ARRAY_LINEAR_GENERAL              0x00000000
+#define     ARRAY_LINEAR_ALIGNED              0x00000001
+#define     ARRAY_1D_TILED_THIN1              0x00000002
+#define     ARRAY_2D_TILED_THIN1              0x00000004
+
 /* Registers */
 #define	ARB_POP						0x2418
 #define 	ENABLE_TC128					(1 << 30)
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 73f600d39ad..3a7095743d4 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1262,6 +1262,10 @@ void r100_pll_errata_after_index(struct radeon_device *rdev);
 		(rdev->family == CHIP_RS400) ||			\
 		(rdev->family == CHIP_RS480))
 #define ASIC_IS_AVIVO(rdev) ((rdev->family >= CHIP_RS600))
+#define ASIC_IS_DCE2(rdev) ((rdev->family == CHIP_RS600)  ||	\
+			    (rdev->family == CHIP_RS690)  ||	\
+			    (rdev->family == CHIP_RS740)  ||	\
+			    (rdev->family >= CHIP_R600))
 #define ASIC_IS_DCE3(rdev) ((rdev->family >= CHIP_RV620))
 #define ASIC_IS_DCE32(rdev) ((rdev->family >= CHIP_RV730))
 #define ASIC_IS_DCE4(rdev) ((rdev->family >= CHIP_CEDAR))
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 04cac7ec903..bc5a2c3382d 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -98,6 +98,14 @@ static inline struct radeon_i2c_bus_rec radeon_lookup_i2c_gpio(struct radeon_dev
 				}
 			}
 
+			/* some DCE3 boards have bad data for this entry */
+			if (ASIC_IS_DCE3(rdev)) {
+				if ((i == 4) &&
+				    (gpio->usClkMaskRegisterIndex == 0x1fda) &&
+				    (gpio->sucI2cId.ucAccess == 0x94))
+					gpio->sucI2cId.ucAccess = 0x14;
+			}
+
 			if (gpio->sucI2cId.ucAccess == id) {
 				i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
 				i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
@@ -174,6 +182,14 @@ void radeon_atombios_i2c_init(struct radeon_device *rdev)
 				}
 			}
 
+			/* some DCE3 boards have bad data for this entry */
+			if (ASIC_IS_DCE3(rdev)) {
+				if ((i == 4) &&
+				    (gpio->usClkMaskRegisterIndex == 0x1fda) &&
+				    (gpio->sucI2cId.ucAccess == 0x94))
+					gpio->sucI2cId.ucAccess = 0x14;
+			}
+
 			i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
 			i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
 			i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
@@ -526,8 +542,6 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 	if (crev < 2)
 		return false;
 
-	router.valid = false;
-
 	obj_header = (ATOM_OBJECT_HEADER *) (ctx->bios + data_offset);
 	path_obj = (ATOM_DISPLAY_OBJECT_PATH_TABLE *)
 	    (ctx->bios + data_offset +
@@ -624,6 +638,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 			if (connector_type == DRM_MODE_CONNECTOR_Unknown)
 				continue;
 
+			router.ddc_valid = false;
+			router.cd_valid = false;
 			for (j = 0; j < ((le16_to_cpu(path->usSize) - 8) / 2); j++) {
 				uint8_t grph_obj_id, grph_obj_num, grph_obj_type;
 
@@ -647,9 +663,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 								 usDeviceTag));
 
 				} else if (grph_obj_type == GRAPH_OBJECT_TYPE_ROUTER) {
-					router.valid = false;
 					for (k = 0; k < router_obj->ucNumberOfObjects; k++) {
-						u16 router_obj_id = le16_to_cpu(router_obj->asObjects[j].usObjectID);
+						u16 router_obj_id = le16_to_cpu(router_obj->asObjects[k].usObjectID);
 						if (le16_to_cpu(path->usGraphicObjIds[j]) == router_obj_id) {
 							ATOM_COMMON_RECORD_HEADER *record = (ATOM_COMMON_RECORD_HEADER *)
 								(ctx->bios + data_offset +
@@ -657,6 +672,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 							ATOM_I2C_RECORD *i2c_record;
 							ATOM_I2C_ID_CONFIG_ACCESS *i2c_config;
 							ATOM_ROUTER_DDC_PATH_SELECT_RECORD *ddc_path;
+							ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *cd_path;
 							ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *router_src_dst_table =
 								(ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT *)
 								(ctx->bios + data_offset +
@@ -690,10 +706,18 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev)
 								case ATOM_ROUTER_DDC_PATH_SELECT_RECORD_TYPE:
 									ddc_path = (ATOM_ROUTER_DDC_PATH_SELECT_RECORD *)
 										record;
-									router.valid = true;
-									router.mux_type = ddc_path->ucMuxType;
-									router.mux_control_pin = ddc_path->ucMuxControlPin;
-									router.mux_state = ddc_path->ucMuxState[enum_id];
+									router.ddc_valid = true;
+									router.ddc_mux_type = ddc_path->ucMuxType;
+									router.ddc_mux_control_pin = ddc_path->ucMuxControlPin;
+									router.ddc_mux_state = ddc_path->ucMuxState[enum_id];
+									break;
+								case ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD_TYPE:
+									cd_path = (ATOM_ROUTER_DATA_CLOCK_PATH_SELECT_RECORD *)
+										record;
+									router.cd_valid = true;
+									router.cd_mux_type = cd_path->ucMuxType;
+									router.cd_mux_control_pin = cd_path->ucMuxControlPin;
+									router.cd_mux_state = cd_path->ucMuxState[enum_id];
 									break;
 								}
 								record = (ATOM_COMMON_RECORD_HEADER *)
@@ -860,7 +884,8 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct
 	size_t bc_size = sizeof(*bios_connectors) * ATOM_MAX_SUPPORTED_DEVICE;
 	struct radeon_router router;
 
-	router.valid = false;
+	router.ddc_valid = false;
+	router.cd_valid = false;
 
 	bios_connectors = kzalloc(bc_size, GFP_KERNEL);
 	if (!bios_connectors)
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
index 7932dc4d6b9..c558685cc63 100644
--- a/drivers/gpu/drm/radeon/radeon_benchmark.c
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -41,7 +41,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
 
 	size = bsize;
 	n = 1024;
-	r = radeon_bo_create(rdev, NULL, size, true, sdomain, &sobj);
+	r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true, sdomain, &sobj);
 	if (r) {
 		goto out_cleanup;
 	}
@@ -53,7 +53,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
 	if (r) {
 		goto out_cleanup;
 	}
-	r = radeon_bo_create(rdev, NULL, size, true, ddomain, &dobj);
+	r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true, ddomain, &dobj);
 	if (r) {
 		goto out_cleanup;
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c
index 654787ec43f..8f2c7b50dcf 100644
--- a/drivers/gpu/drm/radeon/radeon_bios.c
+++ b/drivers/gpu/drm/radeon/radeon_bios.c
@@ -130,6 +130,7 @@ static bool radeon_atrm_get_bios(struct radeon_device *rdev)
 	}
 	return true;
 }
+
 static bool r700_read_disabled_bios(struct radeon_device *rdev)
 {
 	uint32_t viph_control;
@@ -143,7 +144,7 @@ static bool r700_read_disabled_bios(struct radeon_device *rdev)
 	bool r;
 
 	viph_control = RREG32(RADEON_VIPH_CONTROL);
-	bus_cntl = RREG32(RADEON_BUS_CNTL);
+	bus_cntl = RREG32(R600_BUS_CNTL);
 	d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
 	d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
 	vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
@@ -152,7 +153,7 @@ static bool r700_read_disabled_bios(struct radeon_device *rdev)
 	/* disable VIP */
 	WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
 	/* enable the rom */
-	WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+	WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS));
 	/* Disable VGA mode */
 	WREG32(AVIVO_D1VGA_CONTROL,
 	       (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
@@ -191,7 +192,7 @@ static bool r700_read_disabled_bios(struct radeon_device *rdev)
 			cg_spll_status = RREG32(R600_CG_SPLL_STATUS);
 	}
 	WREG32(RADEON_VIPH_CONTROL, viph_control);
-	WREG32(RADEON_BUS_CNTL, bus_cntl);
+	WREG32(R600_BUS_CNTL, bus_cntl);
 	WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
 	WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
 	WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
@@ -216,7 +217,7 @@ static bool r600_read_disabled_bios(struct radeon_device *rdev)
 	bool r;
 
 	viph_control = RREG32(RADEON_VIPH_CONTROL);
-	bus_cntl = RREG32(RADEON_BUS_CNTL);
+	bus_cntl = RREG32(R600_BUS_CNTL);
 	d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
 	d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
 	vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
@@ -231,7 +232,7 @@ static bool r600_read_disabled_bios(struct radeon_device *rdev)
 	/* disable VIP */
 	WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
 	/* enable the rom */
-	WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+	WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS));
 	/* Disable VGA mode */
 	WREG32(AVIVO_D1VGA_CONTROL,
 	       (d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
@@ -262,7 +263,7 @@ static bool r600_read_disabled_bios(struct radeon_device *rdev)
 
 	/* restore regs */
 	WREG32(RADEON_VIPH_CONTROL, viph_control);
-	WREG32(RADEON_BUS_CNTL, bus_cntl);
+	WREG32(R600_BUS_CNTL, bus_cntl);
 	WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
 	WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
 	WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c
index 7b7ea269549..137b8075f6e 100644
--- a/drivers/gpu/drm/radeon/radeon_combios.c
+++ b/drivers/gpu/drm/radeon/radeon_combios.c
@@ -571,6 +571,7 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
 	}
 
 	if (clk_mask && data_mask) {
+		/* system specific masks */
 		i2c.mask_clk_mask = clk_mask;
 		i2c.mask_data_mask = data_mask;
 		i2c.a_clk_mask = clk_mask;
@@ -579,7 +580,19 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
 		i2c.en_data_mask = data_mask;
 		i2c.y_clk_mask = clk_mask;
 		i2c.y_data_mask = data_mask;
+	} else if ((ddc_line == RADEON_GPIOPAD_MASK) ||
+		   (ddc_line == RADEON_MDGPIO_MASK)) {
+		/* default gpiopad masks */
+		i2c.mask_clk_mask = (0x20 << 8);
+		i2c.mask_data_mask = 0x80;
+		i2c.a_clk_mask = (0x20 << 8);
+		i2c.a_data_mask = 0x80;
+		i2c.en_clk_mask = (0x20 << 8);
+		i2c.en_data_mask = 0x80;
+		i2c.y_clk_mask = (0x20 << 8);
+		i2c.y_data_mask = 0x80;
 	} else {
+		/* default masks for ddc pads */
 		i2c.mask_clk_mask = RADEON_GPIO_EN_1;
 		i2c.mask_data_mask = RADEON_GPIO_EN_0;
 		i2c.a_clk_mask = RADEON_GPIO_A_1;
@@ -716,7 +729,7 @@ void radeon_combios_i2c_init(struct radeon_device *rdev)
 					clk = RBIOS8(offset + 3 + (i * 5) + 3);
 					data = RBIOS8(offset + 3 + (i * 5) + 4);
 					i2c = combios_setup_i2c_bus(rdev, DDC_MONID,
-								    clk, data);
+								    (1 << clk), (1 << data));
 					rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK");
 					break;
 				}
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 4dac4b0a02e..8afaf7a7459 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -183,13 +183,13 @@ radeon_connector_analog_encoder_conflict_solve(struct drm_connector *connector,
 					continue;
 
 				if (priority == true) {
-					DRM_INFO("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
-					DRM_INFO("in favor of %s\n", drm_get_connector_name(connector));
+					DRM_DEBUG_KMS("1: conflicting encoders switching off %s\n", drm_get_connector_name(conflict));
+					DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(connector));
 					conflict->status = connector_status_disconnected;
 					radeon_connector_update_scratch_regs(conflict, connector_status_disconnected);
 				} else {
-					DRM_INFO("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector));
-					DRM_INFO("in favor of %s\n", drm_get_connector_name(conflict));
+					DRM_DEBUG_KMS("2: conflicting encoders switching off %s\n", drm_get_connector_name(connector));
+					DRM_DEBUG_KMS("in favor of %s\n", drm_get_connector_name(conflict));
 					current_status = connector_status_disconnected;
 				}
 				break;
@@ -432,13 +432,13 @@ static void radeon_fixup_lvds_native_mode(struct drm_encoder *encoder,
 			    mode->vdisplay == native_mode->vdisplay) {
 				*native_mode = *mode;
 				drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V);
-				DRM_INFO("Determined LVDS native mode details from EDID\n");
+				DRM_DEBUG_KMS("Determined LVDS native mode details from EDID\n");
 				break;
 			}
 		}
 	}
 	if (!native_mode->clock) {
-		DRM_INFO("No LVDS native mode details, disabling RMX\n");
+		DRM_DEBUG_KMS("No LVDS native mode details, disabling RMX\n");
 		radeon_encoder->rmx_type = RMX_OFF;
 	}
 }
@@ -1008,9 +1008,21 @@ static void radeon_dp_connector_destroy(struct drm_connector *connector)
 static int radeon_dp_get_modes(struct drm_connector *connector)
 {
 	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	struct radeon_connector_atom_dig *radeon_dig_connector = radeon_connector->con_priv;
 	int ret;
 
+	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		if (!radeon_dig_connector->edp_on)
+			atombios_set_edp_panel_power(connector,
+						     ATOM_TRANSMITTER_ACTION_POWER_ON);
+	}
 	ret = radeon_ddc_get_modes(radeon_connector);
+	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
+		if (!radeon_dig_connector->edp_on)
+			atombios_set_edp_panel_power(connector,
+						     ATOM_TRANSMITTER_ACTION_POWER_OFF);
+	}
+
 	return ret;
 }
 
@@ -1029,8 +1041,14 @@ radeon_dp_detect(struct drm_connector *connector, bool force)
 	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
 		/* eDP is always DP */
 		radeon_dig_connector->dp_sink_type = CONNECTOR_OBJECT_ID_DISPLAYPORT;
+		if (!radeon_dig_connector->edp_on)
+			atombios_set_edp_panel_power(connector,
+						     ATOM_TRANSMITTER_ACTION_POWER_ON);
 		if (radeon_dp_getdpcd(radeon_connector))
 			ret = connector_status_connected;
+		if (!radeon_dig_connector->edp_on)
+			atombios_set_edp_panel_power(connector,
+						     ATOM_TRANSMITTER_ACTION_POWER_OFF);
 	} else {
 		radeon_dig_connector->dp_sink_type = radeon_dp_getsinktype(radeon_connector);
 		if (radeon_dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) {
@@ -1116,7 +1134,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 				radeon_connector->shared_ddc = true;
 				shared_ddc = true;
 			}
-			if (radeon_connector->router_bus && router->valid &&
+			if (radeon_connector->router_bus && router->ddc_valid &&
 			    (radeon_connector->router.router_id == router->router_id)) {
 				radeon_connector->shared_ddc = false;
 				shared_ddc = false;
@@ -1136,7 +1154,7 @@ radeon_add_atom_connector(struct drm_device *dev,
 	radeon_connector->connector_object_id = connector_object_id;
 	radeon_connector->hpd = *hpd;
 	radeon_connector->router = *router;
-	if (router->valid) {
+	if (router->ddc_valid || router->cd_valid) {
 		radeon_connector->router_bus = radeon_i2c_lookup(rdev, &router->i2c_info);
 		if (!radeon_connector->router_bus)
 			goto failed;
@@ -1157,6 +1175,8 @@ radeon_add_atom_connector(struct drm_device *dev,
 		/* no HPD on analog connectors */
 		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
 		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+		connector->interlace_allowed = true;
+		connector->doublescan_allowed = true;
 		break;
 	case DRM_MODE_CONNECTOR_DVIA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
@@ -1172,6 +1192,8 @@ radeon_add_atom_connector(struct drm_device *dev,
 					      1);
 		/* no HPD on analog connectors */
 		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+		connector->interlace_allowed = true;
+		connector->doublescan_allowed = true;
 		break;
 	case DRM_MODE_CONNECTOR_DVII:
 	case DRM_MODE_CONNECTOR_DVID:
@@ -1208,6 +1230,11 @@ radeon_add_atom_connector(struct drm_device *dev,
 						      rdev->mode_info.load_detect_property,
 						      1);
 		}
+		connector->interlace_allowed = true;
+		if (connector_type == DRM_MODE_CONNECTOR_DVII)
+			connector->doublescan_allowed = true;
+		else
+			connector->doublescan_allowed = false;
 		break;
 	case DRM_MODE_CONNECTOR_HDMIA:
 	case DRM_MODE_CONNECTOR_HDMIB:
@@ -1238,6 +1265,11 @@ radeon_add_atom_connector(struct drm_device *dev,
 						      0);
 		}
 		subpixel_order = SubPixelHorizontalRGB;
+		connector->interlace_allowed = true;
+		if (connector_type == DRM_MODE_CONNECTOR_HDMIB)
+			connector->doublescan_allowed = true;
+		else
+			connector->doublescan_allowed = false;
 		break;
 	case DRM_MODE_CONNECTOR_DisplayPort:
 	case DRM_MODE_CONNECTOR_eDP:
@@ -1275,6 +1307,9 @@ radeon_add_atom_connector(struct drm_device *dev,
 						      rdev->mode_info.underscan_vborder_property,
 						      0);
 		}
+		connector->interlace_allowed = true;
+		/* in theory with a DP to VGA converter... */
+		connector->doublescan_allowed = false;
 		break;
 	case DRM_MODE_CONNECTOR_SVIDEO:
 	case DRM_MODE_CONNECTOR_Composite:
@@ -1290,6 +1325,8 @@ radeon_add_atom_connector(struct drm_device *dev,
 					      radeon_atombios_get_tv_info(rdev));
 		/* no HPD on analog connectors */
 		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+		connector->interlace_allowed = false;
+		connector->doublescan_allowed = false;
 		break;
 	case DRM_MODE_CONNECTOR_LVDS:
 		radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
@@ -1308,6 +1345,8 @@ radeon_add_atom_connector(struct drm_device *dev,
 					      dev->mode_config.scaling_mode_property,
 					      DRM_MODE_SCALE_FULLSCREEN);
 		subpixel_order = SubPixelHorizontalRGB;
+		connector->interlace_allowed = false;
+		connector->doublescan_allowed = false;
 		break;
 	}
 
@@ -1385,6 +1424,8 @@ radeon_add_legacy_connector(struct drm_device *dev,
 		/* no HPD on analog connectors */
 		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
 		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+		connector->interlace_allowed = true;
+		connector->doublescan_allowed = true;
 		break;
 	case DRM_MODE_CONNECTOR_DVIA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
@@ -1400,6 +1441,8 @@ radeon_add_legacy_connector(struct drm_device *dev,
 					      1);
 		/* no HPD on analog connectors */
 		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+		connector->interlace_allowed = true;
+		connector->doublescan_allowed = true;
 		break;
 	case DRM_MODE_CONNECTOR_DVII:
 	case DRM_MODE_CONNECTOR_DVID:
@@ -1417,6 +1460,11 @@ radeon_add_legacy_connector(struct drm_device *dev,
 						      1);
 		}
 		subpixel_order = SubPixelHorizontalRGB;
+		connector->interlace_allowed = true;
+		if (connector_type == DRM_MODE_CONNECTOR_DVII)
+			connector->doublescan_allowed = true;
+		else
+			connector->doublescan_allowed = false;
 		break;
 	case DRM_MODE_CONNECTOR_SVIDEO:
 	case DRM_MODE_CONNECTOR_Composite:
@@ -1439,6 +1487,8 @@ radeon_add_legacy_connector(struct drm_device *dev,
 					      radeon_combios_get_tv_info(rdev));
 		/* no HPD on analog connectors */
 		radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+		connector->interlace_allowed = false;
+		connector->doublescan_allowed = false;
 		break;
 	case DRM_MODE_CONNECTOR_LVDS:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
@@ -1452,6 +1502,8 @@ radeon_add_legacy_connector(struct drm_device *dev,
 					      dev->mode_config.scaling_mode_property,
 					      DRM_MODE_SCALE_FULLSCREEN);
 		subpixel_order = SubPixelHorizontalRGB;
+		connector->interlace_allowed = false;
+		connector->doublescan_allowed = false;
 		break;
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 8adfedfe547..501966a13f4 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -180,7 +180,7 @@ int radeon_wb_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->wb.wb_obj == NULL) {
-		r = radeon_bo_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true,
+		r = radeon_bo_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, PAGE_SIZE, true,
 				RADEON_GEM_DOMAIN_GTT, &rdev->wb.wb_obj);
 		if (r) {
 			dev_warn(rdev->dev, "(%d) create WB bo failed\n", r);
@@ -286,7 +286,7 @@ void radeon_vram_location(struct radeon_device *rdev, struct radeon_mc *mc, u64
 		mc->mc_vram_size = mc->aper_size;
 	}
 	mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
-	dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n",
+	dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n",
 			mc->mc_vram_size >> 20, mc->vram_start,
 			mc->vram_end, mc->real_vram_size >> 20);
 }
@@ -323,7 +323,7 @@ void radeon_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
 		mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
 	}
 	mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
-	dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
+	dev_info(rdev->dev, "GTT: %lluM 0x%016llX - 0x%016llX\n",
 			mc->gtt_size >> 20, mc->gtt_start, mc->gtt_end);
 }
 
@@ -910,11 +910,6 @@ int radeon_resume_kms(struct drm_device *dev)
 	radeon_pm_resume(rdev);
 	radeon_restore_bios_scratch_regs(rdev);
 
-	/* turn on display hw */
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
-	}
-
 	radeon_fbdev_set_suspend(rdev, 0);
 	release_console_sem();
 
@@ -922,6 +917,10 @@ int radeon_resume_kms(struct drm_device *dev)
 	radeon_hpd_init(rdev);
 	/* blat the mode back in */
 	drm_helper_resume_force_mode(dev);
+	/* turn on display hw */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
+	}
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 0383631da69..1df4dc6c063 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -315,10 +315,14 @@ static void radeon_print_display_setup(struct drm_device *dev)
 				 radeon_connector->ddc_bus->rec.en_data_reg,
 				 radeon_connector->ddc_bus->rec.y_clk_reg,
 				 radeon_connector->ddc_bus->rec.y_data_reg);
-			if (radeon_connector->router_bus)
+			if (radeon_connector->router.ddc_valid)
 				DRM_INFO("  DDC Router 0x%x/0x%x\n",
-					 radeon_connector->router.mux_control_pin,
-					 radeon_connector->router.mux_state);
+					 radeon_connector->router.ddc_mux_control_pin,
+					 radeon_connector->router.ddc_mux_state);
+			if (radeon_connector->router.cd_valid)
+				DRM_INFO("  Clock/Data Router 0x%x/0x%x\n",
+					 radeon_connector->router.cd_mux_control_pin,
+					 radeon_connector->router.cd_mux_state);
 		} else {
 			if (connector->connector_type == DRM_MODE_CONNECTOR_VGA ||
 			    connector->connector_type == DRM_MODE_CONNECTOR_DVII ||
@@ -398,8 +402,8 @@ int radeon_ddc_get_modes(struct radeon_connector *radeon_connector)
 	int ret = 0;
 
 	/* on hw with routers, select right port */
-	if (radeon_connector->router.valid)
-		radeon_router_select_port(radeon_connector);
+	if (radeon_connector->router.ddc_valid)
+		radeon_router_select_ddc_port(radeon_connector);
 
 	if ((radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_DisplayPort) ||
 	    (radeon_connector->base.connector_type == DRM_MODE_CONNECTOR_eDP)) {
@@ -432,8 +436,8 @@ static int radeon_ddc_dump(struct drm_connector *connector)
 	int ret = 0;
 
 	/* on hw with routers, select right port */
-	if (radeon_connector->router.valid)
-		radeon_router_select_port(radeon_connector);
+	if (radeon_connector->router.ddc_valid)
+		radeon_router_select_ddc_port(radeon_connector);
 
 	if (!radeon_connector->ddc_bus)
 		return -1;
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 88e4ea92590..60e689f2d04 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -232,9 +232,28 @@ static struct drm_driver driver_old = {
 
 static struct drm_driver kms_driver;
 
+static void radeon_kick_out_firmware_fb(struct pci_dev *pdev)
+{
+	struct apertures_struct *ap;
+	bool primary = false;
+
+	ap = alloc_apertures(1);
+	ap->ranges[0].base = pci_resource_start(pdev, 0);
+	ap->ranges[0].size = pci_resource_len(pdev, 0);
+
+#ifdef CONFIG_X86
+	primary = pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
+#endif
+	remove_conflicting_framebuffers(ap, "radeondrmfb", primary);
+	kfree(ap);
+}
+
 static int __devinit
 radeon_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
+	/* Get rid of things like offb */
+	radeon_kick_out_firmware_fb(pdev);
+
 	return drm_get_pci_dev(pdev, ent, &kms_driver);
 }
 
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index ae58b6849a2..041943df966 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -176,6 +176,7 @@ static inline bool radeon_encoder_is_digital(struct drm_encoder *encoder)
 		return false;
 	}
 }
+
 void
 radeon_link_encoder_connector(struct drm_device *dev)
 {
@@ -228,6 +229,27 @@ radeon_get_connector_for_encoder(struct drm_encoder *encoder)
 	return NULL;
 }
 
+struct drm_encoder *radeon_atom_get_external_encoder(struct drm_encoder *encoder)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *other_encoder;
+	struct radeon_encoder *other_radeon_encoder;
+
+	if (radeon_encoder->is_ext_encoder)
+		return NULL;
+
+	list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
+		if (other_encoder == encoder)
+			continue;
+		other_radeon_encoder = to_radeon_encoder(other_encoder);
+		if (other_radeon_encoder->is_ext_encoder &&
+		    (radeon_encoder->devices & other_radeon_encoder->devices))
+			return other_encoder;
+	}
+	return NULL;
+}
+
 void radeon_panel_mode_fixup(struct drm_encoder *encoder,
 			     struct drm_display_mode *adjusted_mode)
 {
@@ -426,52 +448,49 @@ atombios_tv_setup(struct drm_encoder *encoder, int action)
 
 }
 
-void
-atombios_external_tmds_setup(struct drm_encoder *encoder, int action)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION args;
-	int index = 0;
-
-	memset(&args, 0, sizeof(args));
-
-	index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
-
-	args.sXTmdsEncoder.ucEnable = action;
-
-	if (radeon_encoder->pixel_clock > 165000)
-		args.sXTmdsEncoder.ucMisc = PANEL_ENCODER_MISC_DUAL;
-
-	/*if (pScrn->rgbBits == 8)*/
-	args.sXTmdsEncoder.ucMisc |= (1 << 1);
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
+union dvo_encoder_control {
+	ENABLE_EXTERNAL_TMDS_ENCODER_PS_ALLOCATION ext_tmds;
+	DVO_ENCODER_CONTROL_PS_ALLOCATION dvo;
+	DVO_ENCODER_CONTROL_PS_ALLOCATION_V3 dvo_v3;
+};
 
-static void
-atombios_ddia_setup(struct drm_encoder *encoder, int action)
+void
+atombios_dvo_setup(struct drm_encoder *encoder, int action)
 {
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	DVO_ENCODER_CONTROL_PS_ALLOCATION args;
-	int index = 0;
+	union dvo_encoder_control args;
+	int index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
 
 	memset(&args, 0, sizeof(args));
 
-	index = GetIndexIntoMasterTable(COMMAND, DVOEncoderControl);
+	if (ASIC_IS_DCE3(rdev)) {
+		/* DCE3+ */
+		args.dvo_v3.ucAction = action;
+		args.dvo_v3.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+		args.dvo_v3.ucDVOConfig = 0; /* XXX */
+	} else if (ASIC_IS_DCE2(rdev)) {
+		/* DCE2 (pre-DCE3 R6xx, RS600/690/740 */
+		args.dvo.sDVOEncoder.ucAction = action;
+		args.dvo.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+		/* DFP1, CRT1, TV1 depending on the type of port */
+		args.dvo.sDVOEncoder.ucDeviceType = ATOM_DEVICE_DFP1_INDEX;
+
+		if (radeon_encoder->pixel_clock > 165000)
+			args.dvo.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute |= PANEL_ENCODER_MISC_DUAL;
+	} else {
+		/* R4xx, R5xx */
+		args.ext_tmds.sXTmdsEncoder.ucEnable = action;
 
-	args.sDVOEncoder.ucAction = action;
-	args.sDVOEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+		if (radeon_encoder->pixel_clock > 165000)
+			args.ext_tmds.sXTmdsEncoder.ucMisc |= PANEL_ENCODER_MISC_DUAL;
 
-	if (radeon_encoder->pixel_clock > 165000)
-		args.sDVOEncoder.usDevAttr.sDigAttrib.ucAttribute = PANEL_ENCODER_MISC_DUAL;
+		/*if (pScrn->rgbBits == 8)*/
+		args.ext_tmds.sXTmdsEncoder.ucMisc |= ATOM_PANEL_MISC_888RGB;
+	}
 
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
 }
 
 union lvds_encoder_control {
@@ -532,14 +551,14 @@ atombios_digital_setup(struct drm_encoder *encoder, int action)
 				if (dig->lcd_misc & ATOM_PANEL_MISC_DUAL)
 					args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
 				if (dig->lcd_misc & ATOM_PANEL_MISC_888RGB)
-					args.v1.ucMisc |= (1 << 1);
+					args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
 			} else {
 				if (dig->linkb)
 					args.v1.ucMisc |= PANEL_ENCODER_MISC_TMDS_LINKB;
 				if (radeon_encoder->pixel_clock > 165000)
 					args.v1.ucMisc |= PANEL_ENCODER_MISC_DUAL;
 				/*if (pScrn->rgbBits == 8) */
-				args.v1.ucMisc |= (1 << 1);
+				args.v1.ucMisc |= ATOM_PANEL_MISC_888RGB;
 			}
 			break;
 		case 2:
@@ -595,6 +614,7 @@ atombios_digital_setup(struct drm_encoder *encoder, int action)
 int
 atombios_get_encoder_mode(struct drm_encoder *encoder)
 {
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct drm_connector *connector;
@@ -602,9 +622,20 @@ atombios_get_encoder_mode(struct drm_encoder *encoder)
 	struct radeon_connector_atom_dig *dig_connector;
 
 	connector = radeon_get_connector_for_encoder(encoder);
-	if (!connector)
-		return 0;
-
+	if (!connector) {
+		switch (radeon_encoder->encoder_id) {
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
+		case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_LVTMA:
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+			return ATOM_ENCODER_MODE_DVI;
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
+		case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2:
+		default:
+			return ATOM_ENCODER_MODE_CRT;
+		}
+	}
 	radeon_connector = to_radeon_connector(connector);
 
 	switch (connector->connector_type) {
@@ -834,6 +865,9 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t
 	memset(&args, 0, sizeof(args));
 
 	switch (radeon_encoder->encoder_id) {
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+		break;
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY:
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY1:
 	case ENCODER_OBJECT_ID_INTERNAL_UNIPHY2:
@@ -978,6 +1012,105 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action, uint8_t
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
+void
+atombios_set_edp_panel_power(struct drm_connector *connector, int action)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	struct drm_device *dev = radeon_connector->base.dev;
+	struct radeon_device *rdev = dev->dev_private;
+	union dig_transmitter_control args;
+	int index = GetIndexIntoMasterTable(COMMAND, UNIPHYTransmitterControl);
+	uint8_t frev, crev;
+
+	if (connector->connector_type != DRM_MODE_CONNECTOR_eDP)
+		return;
+
+	if (!ASIC_IS_DCE4(rdev))
+		return;
+
+	if ((action != ATOM_TRANSMITTER_ACTION_POWER_ON) ||
+	    (action != ATOM_TRANSMITTER_ACTION_POWER_OFF))
+		return;
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	memset(&args, 0, sizeof(args));
+
+	args.v1.ucAction = action;
+
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
+union external_encoder_control {
+	EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION v1;
+};
+
+static void
+atombios_external_encoder_setup(struct drm_encoder *encoder,
+				struct drm_encoder *ext_encoder,
+				int action)
+{
+	struct drm_device *dev = encoder->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	union external_encoder_control args;
+	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+	int index = GetIndexIntoMasterTable(COMMAND, ExternalEncoderControl);
+	u8 frev, crev;
+	int dp_clock = 0;
+	int dp_lane_count = 0;
+	int connector_object_id = 0;
+
+	if (connector) {
+		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+		struct radeon_connector_atom_dig *dig_connector =
+			radeon_connector->con_priv;
+
+		dp_clock = dig_connector->dp_clock;
+		dp_lane_count = dig_connector->dp_lane_count;
+		connector_object_id =
+			(radeon_connector->connector_object_id & OBJECT_ID_MASK) >> OBJECT_ID_SHIFT;
+	}
+
+	memset(&args, 0, sizeof(args));
+
+	if (!atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev))
+		return;
+
+	switch (frev) {
+	case 1:
+		/* no params on frev 1 */
+		break;
+	case 2:
+		switch (crev) {
+		case 1:
+		case 2:
+			args.v1.sDigEncoder.ucAction = action;
+			args.v1.sDigEncoder.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10);
+			args.v1.sDigEncoder.ucEncoderMode = atombios_get_encoder_mode(encoder);
+
+			if (args.v1.sDigEncoder.ucEncoderMode == ATOM_ENCODER_MODE_DP) {
+				if (dp_clock == 270000)
+					args.v1.sDigEncoder.ucConfig |= ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ;
+				args.v1.sDigEncoder.ucLaneNum = dp_lane_count;
+			} else if (radeon_encoder->pixel_clock > 165000)
+				args.v1.sDigEncoder.ucLaneNum = 8;
+			else
+				args.v1.sDigEncoder.ucLaneNum = 4;
+			break;
+		default:
+			DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+			return;
+		}
+		break;
+	default:
+		DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
+		return;
+	}
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+}
+
 static void
 atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
 {
@@ -1021,6 +1154,7 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
 	DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args;
 	int index = 0;
 	bool is_dig = false;
@@ -1043,9 +1177,14 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
 	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
 		index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
 		break;
+	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
+		if (ASIC_IS_DCE3(rdev))
+			is_dig = true;
+		else
+			index = GetIndexIntoMasterTable(COMMAND, DVOOutputControl);
+		break;
 	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
 		index = GetIndexIntoMasterTable(COMMAND, LCD1OutputControl);
 		break;
@@ -1082,34 +1221,85 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 			if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
 				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
 
+				if (connector &&
+				    (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+					struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+					struct radeon_connector_atom_dig *radeon_dig_connector =
+						radeon_connector->con_priv;
+					atombios_set_edp_panel_power(connector,
+								     ATOM_TRANSMITTER_ACTION_POWER_ON);
+					radeon_dig_connector->edp_on = true;
+				}
 				dp_link_train(encoder, connector);
 				if (ASIC_IS_DCE4(rdev))
 					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_ON);
 			}
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLON, 0, 0);
 			break;
 		case DRM_MODE_DPMS_STANDBY:
 		case DRM_MODE_DPMS_SUSPEND:
 		case DRM_MODE_DPMS_OFF:
 			atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_DISABLE_OUTPUT, 0, 0);
 			if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_DP) {
+				struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
+
 				if (ASIC_IS_DCE4(rdev))
 					atombios_dig_encoder_setup(encoder, ATOM_ENCODER_CMD_DP_VIDEO_OFF);
+				if (connector &&
+				    (connector->connector_type == DRM_MODE_CONNECTOR_eDP)) {
+					struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+					struct radeon_connector_atom_dig *radeon_dig_connector =
+						radeon_connector->con_priv;
+					atombios_set_edp_panel_power(connector,
+								     ATOM_TRANSMITTER_ACTION_POWER_OFF);
+					radeon_dig_connector->edp_on = false;
+				}
 			}
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+				atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_LCD_BLOFF, 0, 0);
 			break;
 		}
 	} else {
 		switch (mode) {
 		case DRM_MODE_DPMS_ON:
 			args.ucAction = ATOM_ENABLE;
+			atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+				args.ucAction = ATOM_LCD_BLON;
+				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+			}
 			break;
 		case DRM_MODE_DPMS_STANDBY:
 		case DRM_MODE_DPMS_SUSPEND:
 		case DRM_MODE_DPMS_OFF:
 			args.ucAction = ATOM_DISABLE;
+			atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
+				args.ucAction = ATOM_LCD_BLOFF;
+				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+			}
 			break;
 		}
-		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 	}
+
+	if (ext_encoder) {
+		int action;
+
+		switch (mode) {
+		case DRM_MODE_DPMS_ON:
+		default:
+			action = ATOM_ENABLE;
+			break;
+		case DRM_MODE_DPMS_STANDBY:
+		case DRM_MODE_DPMS_SUSPEND:
+		case DRM_MODE_DPMS_OFF:
+			action = ATOM_DISABLE;
+			break;
+		}
+		atombios_external_encoder_setup(encoder, ext_encoder, action);
+	}
+
 	radeon_atombios_encoder_dpms_scratch_regs(encoder, (mode == DRM_MODE_DPMS_ON) ? true : false);
 
 }
@@ -1242,7 +1432,7 @@ atombios_set_encoder_crtc_source(struct drm_encoder *encoder)
 		break;
 	default:
 		DRM_ERROR("Unknown table version: %d, %d\n", frev, crev);
-		break;
+		return;
 	}
 
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
@@ -1357,6 +1547,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 	struct drm_device *dev = encoder->dev;
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_encoder *ext_encoder = radeon_atom_get_external_encoder(encoder);
 
 	radeon_encoder->pixel_clock = adjusted_mode->clock;
 
@@ -1400,11 +1591,9 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 		}
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-		atombios_ddia_setup(encoder, ATOM_ENABLE);
-		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-		atombios_external_tmds_setup(encoder, ATOM_ENABLE);
+		atombios_dvo_setup(encoder, ATOM_ENABLE);
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
@@ -1419,6 +1608,11 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 		}
 		break;
 	}
+
+	if (ext_encoder) {
+		atombios_external_encoder_setup(encoder, ext_encoder, ATOM_ENABLE);
+	}
+
 	atombios_apply_encoder_quirks(encoder, adjusted_mode);
 
 	if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
@@ -1520,6 +1714,7 @@ radeon_atom_dac_detect(struct drm_encoder *encoder, struct drm_connector *connec
 static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
 {
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
+	struct drm_connector *connector = radeon_get_connector_for_encoder(encoder);
 
 	if (radeon_encoder->active_device &
 	    (ATOM_DEVICE_DFP_SUPPORT | ATOM_DEVICE_LCD_SUPPORT)) {
@@ -1531,6 +1726,13 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder)
 	radeon_atom_output_lock(encoder, true);
 	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
 
+	/* select the clock/data port if it uses a router */
+	if (connector) {
+		struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+		if (radeon_connector->router.cd_valid)
+			radeon_router_select_cd_port(radeon_connector);
+	}
+
 	/* this is needed for the pll/ss setup to work correctly in some cases */
 	atombios_set_encoder_crtc_source(encoder);
 }
@@ -1547,6 +1749,23 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
 	struct radeon_device *rdev = dev->dev_private;
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 	struct radeon_encoder_atom_dig *dig;
+
+	/* check for pre-DCE3 cards with shared encoders;
+	 * can't really use the links individually, so don't disable
+	 * the encoder if it's in use by another connector
+	 */
+	if (!ASIC_IS_DCE3(rdev)) {
+		struct drm_encoder *other_encoder;
+		struct radeon_encoder *other_radeon_encoder;
+
+		list_for_each_entry(other_encoder, &dev->mode_config.encoder_list, head) {
+			other_radeon_encoder = to_radeon_encoder(other_encoder);
+			if ((radeon_encoder->encoder_id == other_radeon_encoder->encoder_id) &&
+			    drm_helper_encoder_in_use(other_encoder))
+				goto disable_done;
+		}
+	}
+
 	radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
 
 	switch (radeon_encoder->encoder_id) {
@@ -1570,11 +1789,9 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
 		}
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DDI:
-		atombios_ddia_setup(encoder, ATOM_DISABLE);
-		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DVO1:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1:
-		atombios_external_tmds_setup(encoder, ATOM_DISABLE);
+		atombios_dvo_setup(encoder, ATOM_DISABLE);
 		break;
 	case ENCODER_OBJECT_ID_INTERNAL_DAC1:
 	case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1:
@@ -1586,6 +1803,7 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
 		break;
 	}
 
+disable_done:
 	if (radeon_encoder_is_digital(encoder)) {
 		if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI)
 			r600_hdmi_disable(encoder);
@@ -1595,6 +1813,53 @@ static void radeon_atom_encoder_disable(struct drm_encoder *encoder)
 	radeon_encoder->active_device = 0;
 }
 
+/* these are handled by the primary encoders */
+static void radeon_atom_ext_prepare(struct drm_encoder *encoder)
+{
+
+}
+
+static void radeon_atom_ext_commit(struct drm_encoder *encoder)
+{
+
+}
+
+static void
+radeon_atom_ext_mode_set(struct drm_encoder *encoder,
+			 struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode)
+{
+
+}
+
+static void radeon_atom_ext_disable(struct drm_encoder *encoder)
+{
+
+}
+
+static void
+radeon_atom_ext_dpms(struct drm_encoder *encoder, int mode)
+{
+
+}
+
+static bool radeon_atom_ext_mode_fixup(struct drm_encoder *encoder,
+				       struct drm_display_mode *mode,
+				       struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+static const struct drm_encoder_helper_funcs radeon_atom_ext_helper_funcs = {
+	.dpms = radeon_atom_ext_dpms,
+	.mode_fixup = radeon_atom_ext_mode_fixup,
+	.prepare = radeon_atom_ext_prepare,
+	.mode_set = radeon_atom_ext_mode_set,
+	.commit = radeon_atom_ext_commit,
+	.disable = radeon_atom_ext_disable,
+	/* no detect for TMDS/LVDS yet */
+};
+
 static const struct drm_encoder_helper_funcs radeon_atom_dig_helper_funcs = {
 	.dpms = radeon_atom_encoder_dpms,
 	.mode_fixup = radeon_atom_mode_fixup,
@@ -1704,6 +1969,7 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_enum, uint32_t
 	radeon_encoder->devices = supported_device;
 	radeon_encoder->rmx_type = RMX_OFF;
 	radeon_encoder->underscan_type = UNDERSCAN_OFF;
+	radeon_encoder->is_ext_encoder = false;
 
 	switch (radeon_encoder->encoder_id) {
 	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
@@ -1745,6 +2011,9 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_enum, uint32_t
 			radeon_encoder->rmx_type = RMX_FULL;
 			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
 			radeon_encoder->enc_priv = radeon_atombios_get_lvds_info(radeon_encoder);
+		} else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT)) {
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
 		} else {
 			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
 			radeon_encoder->enc_priv = radeon_atombios_set_dig_info(radeon_encoder);
@@ -1753,5 +2022,22 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_enum, uint32_t
 		}
 		drm_encoder_helper_add(encoder, &radeon_atom_dig_helper_funcs);
 		break;
+	case ENCODER_OBJECT_ID_SI170B:
+	case ENCODER_OBJECT_ID_CH7303:
+	case ENCODER_OBJECT_ID_EXTERNAL_SDVOA:
+	case ENCODER_OBJECT_ID_EXTERNAL_SDVOB:
+	case ENCODER_OBJECT_ID_TITFP513:
+	case ENCODER_OBJECT_ID_VT1623:
+	case ENCODER_OBJECT_ID_HDMI_SI1930:
+		/* these are handled by the primary encoders */
+		radeon_encoder->is_ext_encoder = true;
+		if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT))
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_LVDS);
+		else if (radeon_encoder->devices & (ATOM_DEVICE_CRT_SUPPORT))
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_DAC);
+		else
+			drm_encoder_init(dev, encoder, &radeon_atom_enc_funcs, DRM_MODE_ENCODER_TMDS);
+		drm_encoder_helper_add(encoder, &radeon_atom_ext_helper_funcs);
+		break;
 	}
 }
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index efa211898fe..6abea32be5e 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -245,7 +245,7 @@ static int radeonfb_create(struct radeon_fbdev *rfbdev,
 		goto out_unref;
 	}
 	info->apertures->ranges[0].base = rdev->ddev->mode_config.fb_base;
-	info->apertures->ranges[0].size = rdev->mc.real_vram_size;
+	info->apertures->ranges[0].size = rdev->mc.aper_size;
 
 	info->fix.mmio_start = 0;
 	info->fix.mmio_len = 0;
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 216392d0353..daacb281dfa 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -240,7 +240,8 @@ retry:
 		 */
 		if (seq == rdev->fence_drv.last_seq && radeon_gpu_is_lockup(rdev)) {
 			/* good news we believe it's a lockup */
-			WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n", fence->seq, seq);
+			WARN(1, "GPU lockup (waiting for 0x%08X last fence id 0x%08X)\n",
+			     fence->seq, seq);
 			/* FIXME: what should we do ? marking everyone
 			 * as signaled for now
 			 */
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index e65b90317fa..65016117d95 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -79,8 +79,8 @@ int radeon_gart_table_vram_alloc(struct radeon_device *rdev)
 
 	if (rdev->gart.table.vram.robj == NULL) {
 		r = radeon_bo_create(rdev, NULL, rdev->gart.table_size,
-					true, RADEON_GEM_DOMAIN_VRAM,
-					&rdev->gart.table.vram.robj);
+				     PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
+				     &rdev->gart.table.vram.robj);
 		if (r) {
 			return r;
 		}
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index d1e595d9172..df95eb83dac 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -67,7 +67,7 @@ int radeon_gem_object_create(struct radeon_device *rdev, int size,
 	if (alignment < PAGE_SIZE) {
 		alignment = PAGE_SIZE;
 	}
-	r = radeon_bo_create(rdev, gobj, size, kernel, initial_domain, &robj);
+	r = radeon_bo_create(rdev, gobj, size, alignment, kernel, initial_domain, &robj);
 	if (r) {
 		if (r != -ERESTARTSYS)
 			DRM_ERROR("Failed to allocate GEM object (%d, %d, %u, %d)\n",
diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 6a13ee38a5b..ded2a45bc95 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -53,8 +53,8 @@ bool radeon_ddc_probe(struct radeon_connector *radeon_connector)
 	};
 
 	/* on hw with routers, select right port */
-	if (radeon_connector->router.valid)
-		radeon_router_select_port(radeon_connector);
+	if (radeon_connector->router.ddc_valid)
+		radeon_router_select_ddc_port(radeon_connector);
 
 	ret = i2c_transfer(&radeon_connector->ddc_bus->adapter, msgs, 2);
 	if (ret == 2)
@@ -896,7 +896,8 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
 	     ((rdev->family <= CHIP_RS480) ||
 	      ((rdev->family >= CHIP_RV515) && (rdev->family <= CHIP_R580))))) {
 		/* set the radeon hw i2c adapter */
-		sprintf(i2c->adapter.name, "Radeon i2c hw bus %s", name);
+		snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
+			 "Radeon i2c hw bus %s", name);
 		i2c->adapter.algo = &radeon_i2c_algo;
 		ret = i2c_add_adapter(&i2c->adapter);
 		if (ret) {
@@ -905,7 +906,8 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
 		}
 	} else {
 		/* set the radeon bit adapter */
-		sprintf(i2c->adapter.name, "Radeon i2c bit bus %s", name);
+		snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
+			 "Radeon i2c bit bus %s", name);
 		i2c->adapter.algo_data = &i2c->algo.bit;
 		i2c->algo.bit.pre_xfer = pre_xfer;
 		i2c->algo.bit.post_xfer = post_xfer;
@@ -946,6 +948,8 @@ struct radeon_i2c_chan *radeon_i2c_create_dp(struct drm_device *dev,
 	i2c->rec = *rec;
 	i2c->adapter.owner = THIS_MODULE;
 	i2c->dev = dev;
+	snprintf(i2c->adapter.name, sizeof(i2c->adapter.name),
+		 "Radeon aux bus %s", name);
 	i2c_set_adapdata(&i2c->adapter, i2c);
 	i2c->adapter.algo_data = &i2c->algo.dp;
 	i2c->algo.dp.aux_ch = radeon_dp_i2c_aux_ch;
@@ -1084,26 +1088,51 @@ void radeon_i2c_put_byte(struct radeon_i2c_chan *i2c_bus,
 			  addr, val);
 }
 
-/* router switching */
-void radeon_router_select_port(struct radeon_connector *radeon_connector)
+/* ddc router switching */
+void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector)
 {
 	u8 val;
 
-	if (!radeon_connector->router.valid)
+	if (!radeon_connector->router.ddc_valid)
 		return;
 
 	radeon_i2c_get_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x3, &val);
-	val &= radeon_connector->router.mux_control_pin;
+	val &= ~radeon_connector->router.ddc_mux_control_pin;
 	radeon_i2c_put_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x3, val);
 	radeon_i2c_get_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x1, &val);
-	val &= radeon_connector->router.mux_control_pin;
-	val |= radeon_connector->router.mux_state;
+	val &= ~radeon_connector->router.ddc_mux_control_pin;
+	val |= radeon_connector->router.ddc_mux_state;
+	radeon_i2c_put_byte(radeon_connector->router_bus,
+			    radeon_connector->router.i2c_addr,
+			    0x1, val);
+}
+
+/* clock/data router switching */
+void radeon_router_select_cd_port(struct radeon_connector *radeon_connector)
+{
+	u8 val;
+
+	if (!radeon_connector->router.cd_valid)
+		return;
+
+	radeon_i2c_get_byte(radeon_connector->router_bus,
+			    radeon_connector->router.i2c_addr,
+			    0x3, &val);
+	val &= ~radeon_connector->router.cd_mux_control_pin;
+	radeon_i2c_put_byte(radeon_connector->router_bus,
+			    radeon_connector->router.i2c_addr,
+			    0x3, val);
+	radeon_i2c_get_byte(radeon_connector->router_bus,
+			    radeon_connector->router.i2c_addr,
+			    0x1, &val);
+	val &= ~radeon_connector->router.cd_mux_control_pin;
+	val |= radeon_connector->router.cd_mux_state;
 	radeon_i2c_put_byte(radeon_connector->router_bus,
 			    radeon_connector->router.i2c_addr,
 			    0x1, val);
diff --git a/drivers/gpu/drm/radeon/radeon_irq.c b/drivers/gpu/drm/radeon/radeon_irq.c
index 2f349a30019..465746bd51b 100644
--- a/drivers/gpu/drm/radeon/radeon_irq.c
+++ b/drivers/gpu/drm/radeon/radeon_irq.c
@@ -76,7 +76,7 @@ int radeon_enable_vblank(struct drm_device *dev, int crtc)
 		default:
 			DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
 				  crtc);
-			return EINVAL;
+			return -EINVAL;
 		}
 	} else {
 		switch (crtc) {
@@ -89,7 +89,7 @@ int radeon_enable_vblank(struct drm_device *dev, int crtc)
 		default:
 			DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
 				  crtc);
-			return EINVAL;
+			return -EINVAL;
 		}
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 0b8397000f4..59f834ba283 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -670,7 +670,7 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder,
 
 	if (rdev->is_atom_bios) {
 		radeon_encoder->pixel_clock = adjusted_mode->clock;
-		atombios_external_tmds_setup(encoder, ATOM_ENABLE);
+		atombios_dvo_setup(encoder, ATOM_ENABLE);
 		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
 	} else {
 		fp2_gen_cntl = RREG32(RADEON_FP2_GEN_CNTL);
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 92457163d07..e301c6f9e05 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -375,6 +375,7 @@ struct radeon_encoder {
 	int hdmi_config_offset;
 	int hdmi_audio_workaround;
 	int hdmi_buffer_status;
+	bool is_ext_encoder;
 };
 
 struct radeon_connector_atom_dig {
@@ -385,6 +386,7 @@ struct radeon_connector_atom_dig {
 	u8 dp_sink_type;
 	int dp_clock;
 	int dp_lane_count;
+	bool edp_on;
 };
 
 struct radeon_gpio_rec {
@@ -401,13 +403,19 @@ struct radeon_hpd {
 };
 
 struct radeon_router {
-	bool valid;
 	u32 router_id;
 	struct radeon_i2c_bus_rec i2c_info;
 	u8 i2c_addr;
-	u8 mux_type;
-	u8 mux_control_pin;
-	u8 mux_state;
+	/* i2c mux */
+	bool ddc_valid;
+	u8 ddc_mux_type;
+	u8 ddc_mux_control_pin;
+	u8 ddc_mux_state;
+	/* clock/data mux */
+	bool cd_valid;
+	u8 cd_mux_type;
+	u8 cd_mux_control_pin;
+	u8 cd_mux_state;
 };
 
 struct radeon_connector {
@@ -488,7 +496,8 @@ extern void radeon_i2c_put_byte(struct radeon_i2c_chan *i2c,
 				u8 slave_addr,
 				u8 addr,
 				u8 val);
-extern void radeon_router_select_port(struct radeon_connector *radeon_connector);
+extern void radeon_router_select_ddc_port(struct radeon_connector *radeon_connector);
+extern void radeon_router_select_cd_port(struct radeon_connector *radeon_connector);
 extern bool radeon_ddc_probe(struct radeon_connector *radeon_connector);
 extern int radeon_ddc_get_modes(struct radeon_connector *radeon_connector);
 
@@ -516,9 +525,10 @@ struct drm_encoder *radeon_encoder_legacy_primary_dac_add(struct drm_device *dev
 struct drm_encoder *radeon_encoder_legacy_tv_dac_add(struct drm_device *dev, int bios_index, int with_tv);
 struct drm_encoder *radeon_encoder_legacy_tmds_int_add(struct drm_device *dev, int bios_index);
 struct drm_encoder *radeon_encoder_legacy_tmds_ext_add(struct drm_device *dev, int bios_index);
-extern void atombios_external_tmds_setup(struct drm_encoder *encoder, int action);
+extern void atombios_dvo_setup(struct drm_encoder *encoder, int action);
 extern void atombios_digital_setup(struct drm_encoder *encoder, int action);
 extern int atombios_get_encoder_mode(struct drm_encoder *encoder);
+extern void atombios_set_edp_panel_power(struct drm_connector *connector, int action);
 extern void radeon_encoder_set_active_device(struct drm_encoder *encoder);
 
 extern void radeon_crtc_load_lut(struct drm_crtc *crtc);
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index d7ab9141641..a598d0049aa 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -69,7 +69,7 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain)
 	u32 c = 0;
 
 	rbo->placement.fpfn = 0;
-	rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
+	rbo->placement.lpfn = 0;
 	rbo->placement.placement = rbo->placements;
 	rbo->placement.busy_placement = rbo->placements;
 	if (domain & RADEON_GEM_DOMAIN_VRAM)
@@ -86,11 +86,13 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain)
 }
 
 int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
-			unsigned long size, bool kernel, u32 domain,
-			struct radeon_bo **bo_ptr)
+		     unsigned long size, int byte_align, bool kernel, u32 domain,
+		     struct radeon_bo **bo_ptr)
 {
 	struct radeon_bo *bo;
 	enum ttm_bo_type type;
+	unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
+	unsigned long max_size = 0;
 	int r;
 
 	if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) {
@@ -102,6 +104,16 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
 		type = ttm_bo_type_device;
 	}
 	*bo_ptr = NULL;
+
+	/* maximun bo size is the minimun btw visible vram and gtt size */
+	max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size);
+	if ((page_align << PAGE_SHIFT) >= max_size) {
+		printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n",
+			__func__, __LINE__, page_align  >> (20 - PAGE_SHIFT), max_size >> 20);
+		return -ENOMEM;
+	}
+
+retry:
 	bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
 	if (bo == NULL)
 		return -ENOMEM;
@@ -109,13 +121,11 @@ int radeon_bo_create(struct radeon_device *rdev, struct drm_gem_object *gobj,
 	bo->gobj = gobj;
 	bo->surface_reg = -1;
 	INIT_LIST_HEAD(&bo->list);
-
-retry:
 	radeon_ttm_placement_from_domain(bo, domain);
 	/* Kernel allocation are uninterruptible */
 	mutex_lock(&rdev->vram_mutex);
 	r = ttm_bo_init(&rdev->mman.bdev, &bo->tbo, size, type,
-			&bo->placement, 0, 0, !kernel, NULL, size,
+			&bo->placement, page_align, 0, !kernel, NULL, size,
 			&radeon_ttm_bo_destroy);
 	mutex_unlock(&rdev->vram_mutex);
 	if (unlikely(r != 0)) {
diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h
index 3481bc7f6f5..d143702b244 100644
--- a/drivers/gpu/drm/radeon/radeon_object.h
+++ b/drivers/gpu/drm/radeon/radeon_object.h
@@ -137,9 +137,10 @@ static inline int radeon_bo_wait(struct radeon_bo *bo, u32 *mem_type,
 }
 
 extern int radeon_bo_create(struct radeon_device *rdev,
-				struct drm_gem_object *gobj, unsigned long size,
-				bool kernel, u32 domain,
-				struct radeon_bo **bo_ptr);
+			    struct drm_gem_object *gobj, unsigned long size,
+			    int byte_align,
+			    bool kernel, u32 domain,
+			    struct radeon_bo **bo_ptr);
 extern int radeon_bo_kmap(struct radeon_bo *bo, void **ptr);
 extern void radeon_bo_kunmap(struct radeon_bo *bo);
 extern void radeon_bo_unref(struct radeon_bo **bo);
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index 6ea798ce821..06e79822a2b 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -176,8 +176,8 @@ int radeon_ib_pool_init(struct radeon_device *rdev)
 	INIT_LIST_HEAD(&rdev->ib_pool.bogus_ib);
 	/* Allocate 1M object buffer */
 	r = radeon_bo_create(rdev, NULL,  RADEON_IB_POOL_SIZE*64*1024,
-				true, RADEON_GEM_DOMAIN_GTT,
-				&rdev->ib_pool.robj);
+			     PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT,
+			     &rdev->ib_pool.robj);
 	if (r) {
 		DRM_ERROR("radeon: failed to ib pool (%d).\n", r);
 		return r;
@@ -332,7 +332,7 @@ int radeon_ring_init(struct radeon_device *rdev, unsigned ring_size)
 	rdev->cp.ring_size = ring_size;
 	/* Allocate ring buffer */
 	if (rdev->cp.ring_obj == NULL) {
-		r = radeon_bo_create(rdev, NULL, rdev->cp.ring_size, true,
+		r = radeon_bo_create(rdev, NULL, rdev->cp.ring_size, PAGE_SIZE, true,
 					RADEON_GEM_DOMAIN_GTT,
 					&rdev->cp.ring_obj);
 		if (r) {
diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c
index 313c96bc09d..5b44f652145 100644
--- a/drivers/gpu/drm/radeon/radeon_test.c
+++ b/drivers/gpu/drm/radeon/radeon_test.c
@@ -52,7 +52,7 @@ void radeon_test_moves(struct radeon_device *rdev)
 		goto out_cleanup;
 	}
 
-	r = radeon_bo_create(rdev, NULL, size, true, RADEON_GEM_DOMAIN_VRAM,
+	r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
 				&vram_obj);
 	if (r) {
 		DRM_ERROR("Failed to create VRAM object\n");
@@ -71,7 +71,7 @@ void radeon_test_moves(struct radeon_device *rdev)
 		void **gtt_start, **gtt_end;
 		void **vram_start, **vram_end;
 
-		r = radeon_bo_create(rdev, NULL, size, true,
+		r = radeon_bo_create(rdev, NULL, size, PAGE_SIZE, true,
 					 RADEON_GEM_DOMAIN_GTT, gtt_obj + i);
 		if (r) {
 			DRM_ERROR("Failed to create GTT object %d\n", i);
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index fe95bb35317..1272e4b6a1d 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -529,7 +529,7 @@ int radeon_ttm_init(struct radeon_device *rdev)
 		DRM_ERROR("Failed initializing VRAM heap.\n");
 		return r;
 	}
-	r = radeon_bo_create(rdev, NULL, 256 * 1024, true,
+	r = radeon_bo_create(rdev, NULL, 256 * 1024, PAGE_SIZE, true,
 				RADEON_GEM_DOMAIN_VRAM,
 				&rdev->stollen_vga_memory);
 	if (r) {
@@ -689,7 +689,8 @@ static int radeon_ttm_backend_bind(struct ttm_backend *backend,
 	gtt = container_of(backend, struct radeon_ttm_backend, backend);
 	gtt->offset = bo_mem->start << PAGE_SHIFT;
 	if (!gtt->num_pages) {
-		WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n", gtt->num_pages, bo_mem, backend);
+		WARN(1, "nothing to bind %lu pages for mreg %p back %p!\n",
+		     gtt->num_pages, bo_mem, backend);
 	}
 	r = radeon_gart_bind(gtt->rdev, gtt->offset,
 			     gtt->num_pages, gtt->pages);
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index f683e51a2a0..5512e4e5e63 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -78,7 +78,7 @@ int rs400_gart_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->gart.table.ram.ptr) {
-		WARN(1, "RS400 GART already initialized.\n");
+		WARN(1, "RS400 GART already initialized\n");
 		return 0;
 	}
 	/* Check gart size */
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index b091a1f6fa4..f1c6e02c2e6 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -375,7 +375,7 @@ int rs600_gart_init(struct radeon_device *rdev)
 	int r;
 
 	if (rdev->gart.table.vram.robj) {
-		WARN(1, "RS600 GART already initialized.\n");
+		WARN(1, "RS600 GART already initialized\n");
 		return 0;
 	}
 	/* Initialize common gart structure */
@@ -505,7 +505,7 @@ int rs600_irq_set(struct radeon_device *rdev)
 		~S_007D18_DC_HOT_PLUG_DETECT2_INT_EN(1);
 
 	if (!rdev->irq.installed) {
-		WARN(1, "Can't enable IRQ/MSI because no handler is installed.\n");
+		WARN(1, "Can't enable IRQ/MSI because no handler is installed\n");
 		WREG32(R_000040_GEN_INT_CNTL, 0);
 		return -EINVAL;
 	}
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 245374e2b77..4dfead8cee3 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -915,8 +915,8 @@ static int rv770_vram_scratch_init(struct radeon_device *rdev)
 
 	if (rdev->vram_scratch.robj == NULL) {
 		r = radeon_bo_create(rdev, NULL, RADEON_GPU_PAGE_SIZE,
-					true, RADEON_GEM_DOMAIN_VRAM,
-					&rdev->vram_scratch.robj);
+				     PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM,
+				     &rdev->vram_scratch.robj);
 		if (r) {
 			return r;
 		}
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index a1cb783c713..934a96a7854 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -27,14 +27,6 @@
 /*
  * Authors: Thomas Hellstrom <thellstrom-at-vmware-dot-com>
  */
-/* Notes:
- *
- * We store bo pointer in drm_mm_node struct so we know which bo own a
- * specific node. There is no protection on the pointer, thus to make
- * sure things don't go berserk you have to access this pointer while
- * holding the global lru lock and make sure anytime you free a node you
- * reset the pointer to NULL.
- */
 
 #include "ttm/ttm_module.h"
 #include "ttm/ttm_bo_driver.h"
@@ -45,6 +37,7 @@
 #include <linux/mm.h>
 #include <linux/file.h>
 #include <linux/module.h>
+#include <asm/atomic.h>
 
 #define TTM_ASSERT_LOCKED(param)
 #define TTM_DEBUG(fmt, arg...)
@@ -231,6 +224,9 @@ int ttm_bo_reserve_locked(struct ttm_buffer_object *bo,
 	int ret;
 
 	while (unlikely(atomic_cmpxchg(&bo->reserved, 0, 1) != 0)) {
+		/**
+		 * Deadlock avoidance for multi-bo reserving.
+		 */
 		if (use_sequence && bo->seq_valid &&
 			(sequence - bo->val_seq < (1 << 31))) {
 			return -EAGAIN;
@@ -248,6 +244,14 @@ int ttm_bo_reserve_locked(struct ttm_buffer_object *bo,
 	}
 
 	if (use_sequence) {
+		/**
+		 * Wake up waiters that may need to recheck for deadlock,
+		 * if we decreased the sequence number.
+		 */
+		if (unlikely((bo->val_seq - sequence < (1 << 31))
+			     || !bo->seq_valid))
+			wake_up_all(&bo->event_queue);
+
 		bo->val_seq = sequence;
 		bo->seq_valid = true;
 	} else {
@@ -452,6 +456,11 @@ static void ttm_bo_cleanup_memtype_use(struct ttm_buffer_object *bo)
 	ttm_bo_mem_put(bo, &bo->mem);
 
 	atomic_set(&bo->reserved, 0);
+
+	/*
+	 * Make processes trying to reserve really pick it up.
+	 */
+	smp_mb__after_atomic_dec();
 	wake_up_all(&bo->event_queue);
 }
 
@@ -460,7 +469,7 @@ static void ttm_bo_cleanup_refs_or_queue(struct ttm_buffer_object *bo)
 	struct ttm_bo_device *bdev = bo->bdev;
 	struct ttm_bo_global *glob = bo->glob;
 	struct ttm_bo_driver *driver;
-	void *sync_obj;
+	void *sync_obj = NULL;
 	void *sync_obj_arg;
 	int put_count;
 	int ret;
@@ -495,17 +504,20 @@ static void ttm_bo_cleanup_refs_or_queue(struct ttm_buffer_object *bo)
 		spin_lock(&glob->lru_lock);
 	}
 queue:
-	sync_obj = bo->sync_obj;
-	sync_obj_arg = bo->sync_obj_arg;
 	driver = bdev->driver;
+	if (bo->sync_obj)
+		sync_obj = driver->sync_obj_ref(bo->sync_obj);
+	sync_obj_arg = bo->sync_obj_arg;
 
 	kref_get(&bo->list_kref);
 	list_add_tail(&bo->ddestroy, &bdev->ddestroy);
 	spin_unlock(&glob->lru_lock);
 	spin_unlock(&bo->lock);
 
-	if (sync_obj)
+	if (sync_obj) {
 		driver->sync_obj_flush(sync_obj, sync_obj_arg);
+		driver->sync_obj_unref(&sync_obj);
+	}
 	schedule_delayed_work(&bdev->wq,
 			      ((HZ / 100) < 1) ? 1 : HZ / 100);
 }
@@ -822,7 +834,6 @@ static int ttm_bo_mem_force_space(struct ttm_buffer_object *bo,
 					bool no_wait_gpu)
 {
 	struct ttm_bo_device *bdev = bo->bdev;
-	struct ttm_bo_global *glob = bdev->glob;
 	struct ttm_mem_type_manager *man = &bdev->man[mem_type];
 	int ret;
 
@@ -832,12 +843,6 @@ static int ttm_bo_mem_force_space(struct ttm_buffer_object *bo,
 			return ret;
 		if (mem->mm_node)
 			break;
-		spin_lock(&glob->lru_lock);
-		if (list_empty(&man->lru)) {
-			spin_unlock(&glob->lru_lock);
-			break;
-		}
-		spin_unlock(&glob->lru_lock);
 		ret = ttm_mem_evict_first(bdev, mem_type, interruptible,
 						no_wait_reserve, no_wait_gpu);
 		if (unlikely(ret != 0))
@@ -1125,35 +1130,9 @@ EXPORT_SYMBOL(ttm_bo_validate);
 int ttm_bo_check_placement(struct ttm_buffer_object *bo,
 				struct ttm_placement *placement)
 {
-	int i;
+	BUG_ON((placement->fpfn || placement->lpfn) &&
+	       (bo->mem.num_pages > (placement->lpfn - placement->fpfn)));
 
-	if (placement->fpfn || placement->lpfn) {
-		if (bo->mem.num_pages > (placement->lpfn - placement->fpfn)) {
-			printk(KERN_ERR TTM_PFX "Page number range to small "
-				"Need %lu pages, range is [%u, %u]\n",
-				bo->mem.num_pages, placement->fpfn,
-				placement->lpfn);
-			return -EINVAL;
-		}
-	}
-	for (i = 0; i < placement->num_placement; i++) {
-		if (!capable(CAP_SYS_ADMIN)) {
-			if (placement->placement[i] & TTM_PL_FLAG_NO_EVICT) {
-				printk(KERN_ERR TTM_PFX "Need to be root to "
-					"modify NO_EVICT status.\n");
-				return -EINVAL;
-			}
-		}
-	}
-	for (i = 0; i < placement->num_busy_placement; i++) {
-		if (!capable(CAP_SYS_ADMIN)) {
-			if (placement->busy_placement[i] & TTM_PL_FLAG_NO_EVICT) {
-				printk(KERN_ERR TTM_PFX "Need to be root to "
-					"modify NO_EVICT status.\n");
-				return -EINVAL;
-			}
-		}
-	}
 	return 0;
 }
 
@@ -1176,6 +1155,10 @@ int ttm_bo_init(struct ttm_bo_device *bdev,
 	num_pages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	if (num_pages == 0) {
 		printk(KERN_ERR TTM_PFX "Illegal buffer object size.\n");
+		if (destroy)
+			(*destroy)(bo);
+		else
+			kfree(bo);
 		return -EINVAL;
 	}
 	bo->destroy = destroy;
@@ -1369,18 +1352,9 @@ int ttm_bo_init_mm(struct ttm_bo_device *bdev, unsigned type,
 	int ret = -EINVAL;
 	struct ttm_mem_type_manager *man;
 
-	if (type >= TTM_NUM_MEM_TYPES) {
-		printk(KERN_ERR TTM_PFX "Illegal memory type %d\n", type);
-		return ret;
-	}
-
+	BUG_ON(type >= TTM_NUM_MEM_TYPES);
 	man = &bdev->man[type];
-	if (man->has_type) {
-		printk(KERN_ERR TTM_PFX
-		       "Memory manager already initialized for type %d\n",
-		       type);
-		return ret;
-	}
+	BUG_ON(man->has_type);
 
 	ret = bdev->driver->init_mem_type(bdev, type, man);
 	if (ret)
@@ -1389,13 +1363,6 @@ int ttm_bo_init_mm(struct ttm_bo_device *bdev, unsigned type,
 
 	ret = 0;
 	if (type != TTM_PL_SYSTEM) {
-		if (!p_size) {
-			printk(KERN_ERR TTM_PFX
-			       "Zero size memory manager type %d\n",
-			       type);
-			return ret;
-		}
-
 		ret = (*man->func->init)(man, p_size);
 		if (ret)
 			return ret;
@@ -1505,8 +1472,7 @@ int ttm_bo_device_release(struct ttm_bo_device *bdev)
 	list_del(&bdev->device_list);
 	mutex_unlock(&glob->device_list_mutex);
 
-	if (!cancel_delayed_work(&bdev->wq))
-		flush_scheduled_work();
+	cancel_delayed_work_sync(&bdev->wq);
 
 	while (ttm_bo_delayed_delete(bdev, true))
 		;
diff --git a/drivers/gpu/drm/ttm/ttm_bo_manager.c b/drivers/gpu/drm/ttm/ttm_bo_manager.c
index 7410c190c89..038e947d00f 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_manager.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_manager.c
@@ -1,6 +1,6 @@
 /**************************************************************************
  *
- * Copyright (c) 2007-2009 VMware, Inc., Palo Alto, CA., USA
+ * Copyright (c) 2007-2010 VMware, Inc., Palo Alto, CA., USA
  * All Rights Reserved.
  *
  * Permission is hereby granted, free of charge, to any person obtaining a
@@ -31,20 +31,29 @@
 #include "ttm/ttm_module.h"
 #include "ttm/ttm_bo_driver.h"
 #include "ttm/ttm_placement.h"
-#include <linux/jiffies.h>
+#include "drm_mm.h"
 #include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/file.h>
+#include <linux/spinlock.h>
 #include <linux/module.h>
 
+/**
+ * Currently we use a spinlock for the lock, but a mutex *may* be
+ * more appropriate to reduce scheduling latency if the range manager
+ * ends up with very fragmented allocation patterns.
+ */
+
+struct ttm_range_manager {
+	struct drm_mm mm;
+	spinlock_t lock;
+};
+
 static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man,
 			       struct ttm_buffer_object *bo,
 			       struct ttm_placement *placement,
 			       struct ttm_mem_reg *mem)
 {
-	struct ttm_bo_global *glob = man->bdev->glob;
-	struct drm_mm *mm = man->priv;
+	struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
+	struct drm_mm *mm = &rman->mm;
 	struct drm_mm_node *node = NULL;
 	unsigned long lpfn;
 	int ret;
@@ -57,19 +66,19 @@ static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man,
 		if (unlikely(ret))
 			return ret;
 
-		spin_lock(&glob->lru_lock);
+		spin_lock(&rman->lock);
 		node = drm_mm_search_free_in_range(mm,
 					mem->num_pages, mem->page_alignment,
 					placement->fpfn, lpfn, 1);
 		if (unlikely(node == NULL)) {
-			spin_unlock(&glob->lru_lock);
+			spin_unlock(&rman->lock);
 			return 0;
 		}
 		node = drm_mm_get_block_atomic_range(node, mem->num_pages,
-							mem->page_alignment,
-							placement->fpfn,
-							lpfn);
-		spin_unlock(&glob->lru_lock);
+						     mem->page_alignment,
+						     placement->fpfn,
+						     lpfn);
+		spin_unlock(&rman->lock);
 	} while (node == NULL);
 
 	mem->mm_node = node;
@@ -80,12 +89,12 @@ static int ttm_bo_man_get_node(struct ttm_mem_type_manager *man,
 static void ttm_bo_man_put_node(struct ttm_mem_type_manager *man,
 				struct ttm_mem_reg *mem)
 {
-	struct ttm_bo_global *glob = man->bdev->glob;
+	struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
 
 	if (mem->mm_node) {
-		spin_lock(&glob->lru_lock);
+		spin_lock(&rman->lock);
 		drm_mm_put_block(mem->mm_node);
-		spin_unlock(&glob->lru_lock);
+		spin_unlock(&rman->lock);
 		mem->mm_node = NULL;
 	}
 }
@@ -93,49 +102,49 @@ static void ttm_bo_man_put_node(struct ttm_mem_type_manager *man,
 static int ttm_bo_man_init(struct ttm_mem_type_manager *man,
 			   unsigned long p_size)
 {
-	struct drm_mm *mm;
+	struct ttm_range_manager *rman;
 	int ret;
 
-	mm = kzalloc(sizeof(*mm), GFP_KERNEL);
-	if (!mm)
+	rman = kzalloc(sizeof(*rman), GFP_KERNEL);
+	if (!rman)
 		return -ENOMEM;
 
-	ret = drm_mm_init(mm, 0, p_size);
+	ret = drm_mm_init(&rman->mm, 0, p_size);
 	if (ret) {
-		kfree(mm);
+		kfree(rman);
 		return ret;
 	}
 
-	man->priv = mm;
+	spin_lock_init(&rman->lock);
+	man->priv = rman;
 	return 0;
 }
 
 static int ttm_bo_man_takedown(struct ttm_mem_type_manager *man)
 {
-	struct ttm_bo_global *glob = man->bdev->glob;
-	struct drm_mm *mm = man->priv;
-	int ret = 0;
+	struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
+	struct drm_mm *mm = &rman->mm;
 
-	spin_lock(&glob->lru_lock);
+	spin_lock(&rman->lock);
 	if (drm_mm_clean(mm)) {
 		drm_mm_takedown(mm);
-		kfree(mm);
+		spin_unlock(&rman->lock);
+		kfree(rman);
 		man->priv = NULL;
-	} else
-		ret = -EBUSY;
-	spin_unlock(&glob->lru_lock);
-	return ret;
+		return 0;
+	}
+	spin_unlock(&rman->lock);
+	return -EBUSY;
 }
 
 static void ttm_bo_man_debug(struct ttm_mem_type_manager *man,
 			     const char *prefix)
 {
-	struct ttm_bo_global *glob = man->bdev->glob;
-	struct drm_mm *mm = man->priv;
+	struct ttm_range_manager *rman = (struct ttm_range_manager *) man->priv;
 
-	spin_lock(&glob->lru_lock);
-	drm_mm_debug_table(mm, prefix);
-	spin_unlock(&glob->lru_lock);
+	spin_lock(&rman->lock);
+	drm_mm_debug_table(&rman->mm, prefix);
+	spin_unlock(&rman->lock);
 }
 
 const struct ttm_mem_type_manager_func ttm_bo_manager_func = {
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index a7bab87a548..af789dc869b 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -440,10 +440,8 @@ int ttm_tt_bind(struct ttm_tt *ttm, struct ttm_mem_reg *bo_mem)
 		return ret;
 
 	ret = be->func->bind(be, bo_mem);
-	if (ret) {
-		printk(KERN_ERR TTM_PFX "Couldn't bind backend.\n");
+	if (unlikely(ret != 0))
 		return ret;
-	}
 
 	ttm->state = tt_bound;
 
diff --git a/drivers/gpu/drm/via/via_dmablit.c b/drivers/gpu/drm/via/via_dmablit.c
index 9b5b4d9dd62..3e038a394c5 100644
--- a/drivers/gpu/drm/via/via_dmablit.c
+++ b/drivers/gpu/drm/via/via_dmablit.c
@@ -235,9 +235,9 @@ via_lock_all_dma_pages(drm_via_sg_info_t *vsg,  drm_via_dmablit_t *xfer)
 	vsg->num_pages = VIA_PFN(xfer->mem_addr + (xfer->num_lines * xfer->mem_stride - 1)) -
 		first_pfn + 1;
 
-	if (NULL == (vsg->pages = vmalloc(sizeof(struct page *) * vsg->num_pages)))
+	vsg->pages = vzalloc(sizeof(struct page *) * vsg->num_pages);
+	if (NULL == vsg->pages)
 		return -ENOMEM;
-	memset(vsg->pages, 0, sizeof(struct page *) * vsg->num_pages);
 	down_read(&current->mm->mmap_sem);
 	ret = get_user_pages(current, current->mm,
 			     (unsigned long)xfer->mem_addr,
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
index 51d9f9f1d7f..76954e3528c 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -691,6 +691,7 @@ int vmw_execbuf_ioctl(struct drm_device *dev, void *data,
 
 	fence_rep.error = ret;
 	fence_rep.fence_seq = (uint64_t) sequence;
+	fence_rep.pad64 = 0;
 
 	user_fence_rep = (struct drm_vmw_fence_rep __user *)
 	    (unsigned long)arg->fence_rep;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
index 41d9a5b73c0..fe096a7cc0d 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
@@ -659,7 +659,7 @@ int vmw_fb_off(struct vmw_private *vmw_priv)
 	par->dirty.active = false;
 	spin_unlock_irqrestore(&par->dirty.lock, flags);
 
-	flush_scheduled_work();
+	flush_delayed_work_sync(&info->deferred_work);
 
 	par->bo_ptr = NULL;
 	ttm_bo_kunmap(&par->map);
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index 87c6e6156d7..cceeb42789b 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -720,6 +720,8 @@ static int vmw_surface_dmabuf_pin(struct vmw_framebuffer *vfb)
 			       &vmw_vram_ne_placement,
 			       false, &vmw_dmabuf_bo_free);
 	vmw_overlay_resume_all(dev_priv);
+	if (unlikely(ret != 0))
+		vfbs->buffer = NULL;
 
 	return ret;
 }
@@ -730,6 +732,9 @@ static int vmw_surface_dmabuf_unpin(struct vmw_framebuffer *vfb)
 	struct vmw_framebuffer_surface *vfbs =
 		vmw_framebuffer_to_vfbs(&vfb->base);
 
+	if (unlikely(vfbs->buffer == NULL))
+		return 0;
+
 	bo = &vfbs->buffer->base;
 	ttm_bo_unref(&bo);
 	vfbs->buffer = NULL;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
index a01c47ddb5b..29113c9b26a 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c
@@ -557,7 +557,7 @@ int vmw_kms_init_legacy_display_system(struct vmw_private *dev_priv)
 		return -EINVAL;
 	}
 
-	dev_priv->ldu_priv = kmalloc(GFP_KERNEL, sizeof(*dev_priv->ldu_priv));
+	dev_priv->ldu_priv = kmalloc(sizeof(*dev_priv->ldu_priv), GFP_KERNEL);
 
 	if (!dev_priv->ldu_priv)
 		return -ENOMEM;
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
index df2036ed18d..f1a52f9e729 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_overlay.c
@@ -585,7 +585,7 @@ int vmw_overlay_init(struct vmw_private *dev_priv)
 		return -ENOSYS;
 	}
 
-	overlay = kmalloc(GFP_KERNEL, sizeof(*overlay));
+	overlay = kmalloc(sizeof(*overlay), GFP_KERNEL);
 	if (!overlay)
 		return -ENOMEM;
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
index 36e129f0023..5408b1b7996 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c
@@ -862,7 +862,7 @@ int vmw_dmabuf_alloc_ioctl(struct drm_device *dev, void *data,
 			      &vmw_vram_sys_placement, true,
 			      &vmw_user_dmabuf_destroy);
 	if (unlikely(ret != 0))
-		return ret;
+		goto out_no_dmabuf;
 
 	tmp = ttm_bo_reference(&vmw_user_bo->dma.base);
 	ret = ttm_base_object_init(vmw_fpriv(file_priv)->tfile,
@@ -870,19 +870,21 @@ int vmw_dmabuf_alloc_ioctl(struct drm_device *dev, void *data,
 				   false,
 				   ttm_buffer_type,
 				   &vmw_user_dmabuf_release, NULL);
-	if (unlikely(ret != 0)) {
-		ttm_bo_unref(&tmp);
-	} else {
+	if (unlikely(ret != 0))
+		goto out_no_base_object;
+	else {
 		rep->handle = vmw_user_bo->base.hash.key;
 		rep->map_handle = vmw_user_bo->dma.base.addr_space_offset;
 		rep->cur_gmr_id = vmw_user_bo->base.hash.key;
 		rep->cur_gmr_offset = 0;
 	}
-	ttm_bo_unref(&tmp);
 
+out_no_base_object:
+	ttm_bo_unref(&tmp);
+out_no_dmabuf:
 	ttm_read_unlock(&vmaster->lock);
 
-	return 0;
+	return ret;
 }
 
 int vmw_dmabuf_unref_ioctl(struct drm_device *dev, void *data,
diff --git a/drivers/gpu/stub/Kconfig b/drivers/gpu/stub/Kconfig
index 742c423567c..0e1edd7311f 100644
--- a/drivers/gpu/stub/Kconfig
+++ b/drivers/gpu/stub/Kconfig
@@ -3,6 +3,9 @@ config STUB_POULSBO
 	depends on PCI
 	# Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled
 	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
+	select VIDEO_OUTPUT_CONTROL if ACPI
+	select BACKLIGHT_CLASS_DEVICE if ACPI
+	select INPUT if ACPI
 	select ACPI_VIDEO if ACPI
 	help
 	  Choose this option if you have a system that has Intel GMA500
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig
index 3052e2969ad..401acecc7f3 100644
--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -154,7 +154,8 @@ config HID_EGALAX
 	tristate "eGalax multi-touch panel"
 	depends on USB_HID
 	---help---
-	Support for the eGalax dual-touch panel.
+	Support for the eGalax dual-touch panels, including the
+	Joojoo and Wetab tablets.
 
 config HID_ELECOM
 	tristate "ELECOM BM084 bluetooth mouse"
diff --git a/drivers/hid/hid-3m-pct.c b/drivers/hid/hid-3m-pct.c
index 02d8cd3b1b1..4fb7c7528d1 100644
--- a/drivers/hid/hid-3m-pct.c
+++ b/drivers/hid/hid-3m-pct.c
@@ -19,6 +19,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
+#include <linux/input/mt.h>
 
 MODULE_AUTHOR("Stephane Chatty <chatty@enac.fr>");
 MODULE_DESCRIPTION("3M PCT multitouch panels");
@@ -27,8 +28,6 @@ MODULE_LICENSE("GPL");
 #include "hid-ids.h"
 
 #define MAX_SLOTS		60
-#define MAX_TRKID		USHRT_MAX
-#define MAX_EVENTS		360
 
 /* estimated signal-to-noise ratios */
 #define SN_MOVE			2048
@@ -36,14 +35,11 @@ MODULE_LICENSE("GPL");
 
 struct mmm_finger {
 	__s32 x, y, w, h;
-	__u16 id;
-	bool prev_touch;
 	bool touch, valid;
 };
 
 struct mmm_data {
 	struct mmm_finger f[MAX_SLOTS];
-	__u16 id;
 	__u8 curid;
 	__u8 nexp, nreal;
 	bool touch, valid;
@@ -117,14 +113,7 @@ static int mmm_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 					0, 1, 0, 0);
 			return 1;
 		case HID_DG_CONTACTID:
-			field->logical_maximum = MAX_TRKID;
-			hid_map_usage(hi, usage, bit, max,
-					EV_ABS, ABS_MT_TRACKING_ID);
-			input_set_abs_params(hi->input, ABS_MT_TRACKING_ID,
-					     0, MAX_TRKID, 0, 0);
-			if (!hi->input->mt)
-				input_mt_create_slots(hi->input, MAX_SLOTS);
-			input_set_events_per_packet(hi->input, MAX_EVENTS);
+			input_mt_init_slots(hi->input, MAX_SLOTS);
 			return 1;
 		}
 		/* let hid-input decide for the others */
@@ -154,7 +143,6 @@ static int mmm_input_mapped(struct hid_device *hdev, struct hid_input *hi,
  */
 static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
 {
-	struct mmm_finger *oldest = 0;
 	int i;
 	for (i = 0; i < MAX_SLOTS; ++i) {
 		struct mmm_finger *f = &md->f[i];
@@ -163,6 +151,7 @@ static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
 			continue;
 		}
 		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, f->touch);
 		if (f->touch) {
 			/* this finger is on the screen */
 			int wide = (f->w > f->h);
@@ -170,33 +159,16 @@ static void mmm_filter_event(struct mmm_data *md, struct input_dev *input)
 			int major = max(f->w, f->h) >> 1;
 			int minor = min(f->w, f->h) >> 1;
 
-			if (!f->prev_touch)
-				f->id = md->id++;
-			input_event(input, EV_ABS, ABS_MT_TRACKING_ID, f->id);
 			input_event(input, EV_ABS, ABS_MT_POSITION_X, f->x);
 			input_event(input, EV_ABS, ABS_MT_POSITION_Y, f->y);
 			input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
 			input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
 			input_event(input, EV_ABS, ABS_MT_TOUCH_MINOR, minor);
-			/* touchscreen emulation: pick the oldest contact */
-			if (!oldest || ((f->id - oldest->id) & (SHRT_MAX + 1)))
-				oldest = f;
-		} else {
-			/* this finger took off the screen */
-			input_event(input, EV_ABS, ABS_MT_TRACKING_ID, -1);
 		}
-		f->prev_touch = f->touch;
 		f->valid = 0;
 	}
 
-	/* touchscreen emulation */
-	if (oldest) {
-		input_event(input, EV_KEY, BTN_TOUCH, 1);
-		input_event(input, EV_ABS, ABS_X, oldest->x);
-		input_event(input, EV_ABS, ABS_Y, oldest->y);
-	} else {
-		input_event(input, EV_KEY, BTN_TOUCH, 0);
-	}
+	input_mt_report_pointer_emulation(input, true);
 	input_sync(input);
 }
 
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 515345b11ac..3f9673d94da 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1300,6 +1300,9 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV, USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ELECOM, USB_DEVICE_ID_ELECOM_BM084) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
@@ -1386,6 +1389,7 @@ static const struct hid_device_id hid_blacklist[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
@@ -1603,6 +1607,7 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DEALEXTREAME, USB_DEVICE_ID_DEALEXTREAME_RADIO_SI4701) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, 0x0004) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
diff --git a/drivers/hid/hid-egalax.c b/drivers/hid/hid-egalax.c
index 54b017ad258..8fbff2358eb 100644
--- a/drivers/hid/hid-egalax.c
+++ b/drivers/hid/hid-egalax.c
@@ -2,6 +2,8 @@
  *  HID driver for eGalax dual-touch panels
  *
  *  Copyright (c) 2010 Stephane Chatty <chatty@enac.fr>
+ *  Copyright (c) 2010 Henrik Rydberg <rydberg@euromail.se>
+ *  Copyright (c) 2010 Canonical, Ltd.
  *
  */
 
@@ -16,6 +18,7 @@
 #include <linux/hid.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/input/mt.h>
 #include <linux/slab.h>
 #include "usbhid/usbhid.h"
 
@@ -25,38 +28,53 @@ MODULE_LICENSE("GPL");
 
 #include "hid-ids.h"
 
+#define MAX_SLOTS		2
+
+/* estimated signal-to-noise ratios */
+#define SN_MOVE			4096
+#define SN_PRESSURE		32
+
 struct egalax_data {
-	__u16 x, y, z;
-	__u8 id;
-	bool first;		/* is this the first finger in the frame? */
-	bool valid;		/* valid finger data, or just placeholder? */
-	bool activity;		/* at least one active finger previously? */
-	__u16 lastx, lasty, lastz;	/* latest valid (x, y, z) in the frame */
+	int valid;
+	int slot;
+	int touch;
+	int x, y, z;
 };
 
+static void set_abs(struct input_dev *input, unsigned int code,
+		    struct hid_field *field, int snratio)
+{
+	int fmin = field->logical_minimum;
+	int fmax = field->logical_maximum;
+	int fuzz = snratio ? (fmax - fmin) / snratio : 0;
+	input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
+}
+
 static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
+	struct input_dev *input = hi->input;
+
 	switch (usage->hid & HID_USAGE_PAGE) {
 
 	case HID_UP_GENDESK:
 		switch (usage->hid) {
 		case HID_GD_X:
+			field->logical_maximum = 32760;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_POSITION_X);
+			set_abs(input, ABS_MT_POSITION_X, field, SN_MOVE);
 			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_X,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
+			set_abs(input, ABS_X, field, SN_MOVE);
 			return 1;
 		case HID_GD_Y:
+			field->logical_maximum = 32760;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_POSITION_Y);
+			set_abs(input, ABS_MT_POSITION_Y, field, SN_MOVE);
 			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_Y,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
+			set_abs(input, ABS_Y, field, SN_MOVE);
 			return 1;
 		}
 		return 0;
@@ -66,6 +84,7 @@ static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		case HID_DG_TIPSWITCH:
 			/* touchscreen emulation */
 			hid_map_usage(hi, usage, bit, max, EV_KEY, BTN_TOUCH);
+			input_set_capability(input, EV_KEY, BTN_TOUCH);
 			return 1;
 		case HID_DG_INRANGE:
 		case HID_DG_CONFIDENCE:
@@ -73,16 +92,15 @@ static int egalax_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 		case HID_DG_CONTACTMAX:
 			return -1;
 		case HID_DG_CONTACTID:
-			hid_map_usage(hi, usage, bit, max,
-					EV_ABS, ABS_MT_TRACKING_ID);
+			input_mt_init_slots(input, MAX_SLOTS);
 			return 1;
 		case HID_DG_TIPPRESSURE:
+			field->logical_minimum = 0;
 			hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_PRESSURE);
+			set_abs(input, ABS_MT_PRESSURE, field, SN_PRESSURE);
 			/* touchscreen emulation */
-			input_set_abs_params(hi->input, ABS_PRESSURE,
-						field->logical_minimum,
-						field->logical_maximum, 0, 0);
+			set_abs(input, ABS_PRESSURE, field, SN_PRESSURE);
 			return 1;
 		}
 		return 0;
@@ -96,10 +114,10 @@ static int egalax_input_mapped(struct hid_device *hdev, struct hid_input *hi,
 		struct hid_field *field, struct hid_usage *usage,
 		unsigned long **bit, int *max)
 {
+	/* tell hid-input to skip setup of these event types */
 	if (usage->type == EV_KEY || usage->type == EV_ABS)
-		clear_bit(usage->code, *bit);
-
-	return 0;
+		set_bit(usage->type, hi->input->evbit);
+	return -1;
 }
 
 /*
@@ -108,58 +126,16 @@ static int egalax_input_mapped(struct hid_device *hdev, struct hid_input *hi,
  */
 static void egalax_filter_event(struct egalax_data *td, struct input_dev *input)
 {
-	td->first = !td->first; /* touchscreen emulation */
-
-	if (td->valid) {
-		/* emit multitouch events */
-		input_event(input, EV_ABS, ABS_MT_TRACKING_ID, td->id);
-		input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x >> 3);
-		input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y >> 3);
+	input_mt_slot(input, td->slot);
+	input_mt_report_slot_state(input, MT_TOOL_FINGER, td->touch);
+	if (td->touch) {
+		input_event(input, EV_ABS, ABS_MT_POSITION_X, td->x);
+		input_event(input, EV_ABS, ABS_MT_POSITION_Y, td->y);
 		input_event(input, EV_ABS, ABS_MT_PRESSURE, td->z);
-
-		input_mt_sync(input);
-
-		/*
-		 * touchscreen emulation: store (x, y) as
-		 * the last valid values in this frame
-		 */
-		td->lastx = td->x;
-		td->lasty = td->y;
-		td->lastz = td->z;
-	}
-
-	/*
-	 * touchscreen emulation: if this is the second finger and at least
-	 * one in this frame is valid, the latest valid in the frame is
-	 * the oldest on the panel, the one we want for single touch
-	 */
-	if (!td->first && td->activity) {
-		input_event(input, EV_ABS, ABS_X, td->lastx >> 3);
-		input_event(input, EV_ABS, ABS_Y, td->lasty >> 3);
- 		input_event(input, EV_ABS, ABS_PRESSURE, td->lastz);
-	}
-
-	if (!td->valid) {
-		/*
-		 * touchscreen emulation: if the first finger is invalid
-		 * and there previously was finger activity, this is a release
-		 */ 
-		if (td->first && td->activity) {
-			input_event(input, EV_KEY, BTN_TOUCH, 0);
-			td->activity = false;
-		}
-		return;
-	}
-
-
-	/* touchscreen emulation: if no previous activity, emit touch event */
-	if (!td->activity) {
-		input_event(input, EV_KEY, BTN_TOUCH, 1);
-		td->activity = true;
 	}
+	input_mt_report_pointer_emulation(input, true);
 }
 
-
 static int egalax_event(struct hid_device *hid, struct hid_field *field,
 				struct hid_usage *usage, __s32 value)
 {
@@ -169,25 +145,26 @@ static int egalax_event(struct hid_device *hid, struct hid_field *field,
 	 * uses a standard parallel multitouch protocol (product ID ==
 	 * 48xx).  The second is capacitive and uses an unusual "serial"
 	 * protocol with a different message for each multitouch finger
-	 * (product ID == 72xx).  We do not yet generate a correct event
-	 * sequence for the capacitive/serial protocol.
+	 * (product ID == 72xx).
 	 */
 	if (hid->claimed & HID_CLAIMED_INPUT) {
 		struct input_dev *input = field->hidinput->input;
 
 		switch (usage->hid) {
 		case HID_DG_INRANGE:
+			td->valid = value;
+			break;
 		case HID_DG_CONFIDENCE:
 			/* avoid interference from generic hidinput handling */
 			break;
 		case HID_DG_TIPSWITCH:
-			td->valid = value;
+			td->touch = value;
 			break;
 		case HID_DG_TIPPRESSURE:
 			td->z = value;
 			break;
 		case HID_DG_CONTACTID:
-			td->id = value;
+			td->slot = clamp_val(value, 0, MAX_SLOTS - 1);
 			break;
 		case HID_GD_X:
 			td->x = value;
@@ -195,11 +172,11 @@ static int egalax_event(struct hid_device *hid, struct hid_field *field,
 		case HID_GD_Y:
 			td->y = value;
 			/* this is the last field in a finger */
-			egalax_filter_event(td, input);
+			if (td->valid)
+				egalax_filter_event(td, input);
 			break;
 		case HID_DG_CONTACTCOUNT:
 			/* touch emulation: this is the last field in a frame */
-			td->first = false;
 			break;
 
 		default:
@@ -221,7 +198,7 @@ static int egalax_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	struct egalax_data *td;
 	struct hid_report *report;
 
-	td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL);
+	td = kzalloc(sizeof(struct egalax_data), GFP_KERNEL);
 	if (!td) {
 		dev_err(&hdev->dev, "cannot allocate eGalax data\n");
 		return -ENOMEM;
@@ -261,6 +238,12 @@ static const struct hid_device_id egalax_devices[] = {
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
 			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_DWAV,
+			USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, egalax_devices);
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 3341baa86a3..8e11af86b01 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -196,10 +196,15 @@
 #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER	0x0001
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH	0x480d
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH1	0x720c
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH2	0x72a1
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH3	0x480e
+#define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH4	0x726b
 
 #define USB_VENDOR_ID_ELECOM		0x056e
 #define USB_DEVICE_ID_ELECOM_BM084	0x0061
 
+#define USB_VENDOR_ID_DREAM_CHEEKY	0x1d34
+
 #define USB_VENDOR_ID_ELO		0x04E7
 #define USB_DEVICE_ID_ELO_TS2700	0x0020
 
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index bb0b3659437..d8d372bae3c 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -174,7 +174,7 @@ static int hidinput_setkeycode(struct input_dev *dev,
 
 		clear_bit(*old_keycode, dev->keybit);
 		set_bit(usage->code, dev->keybit);
-		dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n",
+		dbg_hid("Assigned keycode %d to HID usage code %x\n",
 			usage->code, usage->hid);
 
 		/*
@@ -203,8 +203,8 @@ static int hidinput_setkeycode(struct input_dev *dev,
  *
  * as seen in the HID specification v1.11 6.2.2.7 Global Items.
  *
- * Only exponent 1 length units are processed. Centimeters are converted to
- * inches. Degrees are converted to radians.
+ * Only exponent 1 length units are processed. Centimeters and inches are
+ * converted to millimeters. Degrees are converted to radians.
  */
 static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 {
@@ -225,13 +225,16 @@ static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 	 */
 	if (code == ABS_X || code == ABS_Y || code == ABS_Z) {
 		if (field->unit == 0x11) {		/* If centimeters */
-			/* Convert to inches */
-			prev = logical_extents;
-			logical_extents *= 254;
-			if (logical_extents < prev)
+			/* Convert to millimeters */
+			unit_exponent += 1;
+		} else if (field->unit == 0x13) {	/* If inches */
+			/* Convert to millimeters */
+			prev = physical_extents;
+			physical_extents *= 254;
+			if (physical_extents < prev)
 				return 0;
-			unit_exponent += 2;
-		} else if (field->unit != 0x13) {	/* If not inches */
+			unit_exponent -= 1;
+		} else {
 			return 0;
 		}
 	} else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) {
diff --git a/drivers/hid/hid-tmff.c b/drivers/hid/hid-tmff.c
index 15434c81479..25be4e1461b 100644
--- a/drivers/hid/hid-tmff.c
+++ b/drivers/hid/hid-tmff.c
@@ -256,6 +256,8 @@ static const struct hid_device_id tm_devices[] = {
 		.driver_data = (unsigned long)ff_joystick },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654),	/* FGT Force Feedback Wheel */
 		.driver_data = (unsigned long)ff_joystick },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a),	/* F430 Force Feedback Wheel */
+		.driver_data = (unsigned long)ff_joystick },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, tm_devices);
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 8a4b32dca9f..e1f07483691 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -32,7 +32,6 @@
 #include <linux/hid.h>
 #include <linux/mutex.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 
 #include <linux/hidraw.h>
 
diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c
index fedd88df9a1..984feb351a5 100644
--- a/drivers/hid/usbhid/hiddev.c
+++ b/drivers/hid/usbhid/hiddev.c
@@ -29,7 +29,6 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/hid.h>
diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c
index 1e4c21fc1a8..86d822aa9bb 100644
--- a/drivers/hwmon/ad7414.c
+++ b/drivers/hwmon/ad7414.c
@@ -178,11 +178,13 @@ static int ad7414_probe(struct i2c_client *client,
 {
 	struct ad7414_data *data;
 	int conf;
-	int err = 0;
+	int err;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
-				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+				     I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+		err = -EOPNOTSUPP;
 		goto exit;
+	}
 
 	data = kzalloc(sizeof(struct ad7414_data), GFP_KERNEL);
 	if (!data) {
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index 4bf969c0a32..be0fdd58aa2 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -916,27 +916,27 @@ static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
 	int nr = sensor_attr->index;
 	struct i2c_client *client = to_i2c_client(dev);
 	struct adm1026_data *data = i2c_get_clientdata(client);
-	int val, orig_div, new_div, shift;
+	int val, orig_div, new_div;
 
 	val = simple_strtol(buf, NULL, 10);
 	new_div = DIV_TO_REG(val);
-	if (new_div == 0) {
-		return -EINVAL;
-	}
+
 	mutex_lock(&data->update_lock);
 	orig_div = data->fan_div[nr];
 	data->fan_div[nr] = DIV_FROM_REG(new_div);
 
 	if (nr < 4) { /* 0 <= nr < 4 */
-		shift = 2 * nr;
 		adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3,
-			((DIV_TO_REG(orig_div) & (~(0x03 << shift))) |
-			(new_div << shift)));
+				    (DIV_TO_REG(data->fan_div[0]) << 0) |
+				    (DIV_TO_REG(data->fan_div[1]) << 2) |
+				    (DIV_TO_REG(data->fan_div[2]) << 4) |
+				    (DIV_TO_REG(data->fan_div[3]) << 6));
 	} else { /* 3 < nr < 8 */
-		shift = 2 * (nr - 4);
 		adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7,
-			((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) |
-			(new_div << shift)));
+				    (DIV_TO_REG(data->fan_div[4]) << 0) |
+				    (DIV_TO_REG(data->fan_div[5]) << 2) |
+				    (DIV_TO_REG(data->fan_div[6]) << 4) |
+				    (DIV_TO_REG(data->fan_div[7]) << 6));
 	}
 
 	if (data->fan_div[nr] != orig_div) {
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 9e775717abb..87d92a56a93 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -1286,8 +1286,10 @@ static int adt7470_probe(struct i2c_client *client,
 	init_completion(&data->auto_update_stop);
 	data->auto_update = kthread_run(adt7470_update_thread, client,
 					dev_name(data->hwmon_dev));
-	if (IS_ERR(data->auto_update))
+	if (IS_ERR(data->auto_update)) {
+		err = PTR_ERR(data->auto_update);
 		goto exit_unregister;
+	}
 
 	return 0;
 
diff --git a/drivers/hwmon/amc6821.c b/drivers/hwmon/amc6821.c
index fa9708c2d72..4033974d1bb 100644
--- a/drivers/hwmon/amc6821.c
+++ b/drivers/hwmon/amc6821.c
@@ -4,7 +4,7 @@
 	Copyright (C) 2009 T. Mertelj <tomaz.mertelj@guest.arnes.si>
 
 	Based on max6650.c:
-	Copyright (C) 2007 Hans J. Koch <hjk@linutronix.de>
+	Copyright (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
 
 	This program is free software; you can redistribute it and/or modify
 	it under the terms of the GNU General Public License as published by
diff --git a/drivers/hwmon/gpio-fan.c b/drivers/hwmon/gpio-fan.c
index aa701a18370..f141a1de519 100644
--- a/drivers/hwmon/gpio-fan.c
+++ b/drivers/hwmon/gpio-fan.c
@@ -376,10 +376,6 @@ static int fan_ctrl_init(struct gpio_fan_data *fan_data,
 		}
 	}
 
-	err = sysfs_create_group(&pdev->dev.kobj, &gpio_fan_ctrl_group);
-	if (err)
-		goto err_free_gpio;
-
 	fan_data->num_ctrl = num_ctrl;
 	fan_data->ctrl = ctrl;
 	fan_data->num_speed = pdata->num_speed;
@@ -391,6 +387,10 @@ static int fan_ctrl_init(struct gpio_fan_data *fan_data,
 		goto err_free_gpio;
 	}
 
+	err = sysfs_create_group(&pdev->dev.kobj, &gpio_fan_ctrl_group);
+	if (err)
+		goto err_free_gpio;
+
 	return 0;
 
 err_free_gpio:
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index 937983407e2..c4c40be0edb 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -497,12 +497,14 @@ static unsigned long chipset_ids[] = {
 	0
 };
 
+#ifdef MODULE
 static struct pci_device_id i5k_amb_ids[] __devinitdata = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5400_ERR) },
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, i5k_amb_ids);
+#endif
 
 static int __devinit i5k_amb_probe(struct platform_device *pdev)
 {
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 14a5d981be7..a428a926419 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -187,6 +187,7 @@ static const u8 IT87_REG_FANX_MIN[]	= { 0x1b, 0x1c, 0x1d, 0x85, 0x87 };
 #define IT87_REG_FAN_MAIN_CTRL 0x13
 #define IT87_REG_FAN_CTL       0x14
 #define IT87_REG_PWM(nr)       (0x15 + (nr))
+#define IT87_REG_PWM_DUTY(nr)  (0x63 + (nr) * 8)
 
 #define IT87_REG_VIN(nr)       (0x20 + (nr))
 #define IT87_REG_TEMP(nr)      (0x29 + (nr))
@@ -251,12 +252,16 @@ struct it87_data {
 	u8 fan_main_ctrl;	/* Register value */
 	u8 fan_ctl;		/* Register value */
 
-	/* The following 3 arrays correspond to the same registers. The
-	 * meaning of bits 6-0 depends on the value of bit 7, and we want
-	 * to preserve settings on mode changes, so we have to track all
-	 * values separately. */
+	/* The following 3 arrays correspond to the same registers up to
+	 * the IT8720F. The meaning of bits 6-0 depends on the value of bit
+	 * 7, and we want to preserve settings on mode changes, so we have
+	 * to track all values separately.
+	 * Starting with the IT8721F, the manual PWM duty cycles are stored
+	 * in separate registers (8-bit values), so the separate tracking
+	 * is no longer needed, but it is still done to keep the driver
+	 * simple. */
 	u8 pwm_ctrl[3];		/* Register value */
-	u8 pwm_duty[3];		/* Manual PWM value set by user (bit 6-0) */
+	u8 pwm_duty[3];		/* Manual PWM value set by user */
 	u8 pwm_temp_map[3];	/* PWM to temp. chan. mapping (bits 1-0) */
 
 	/* Automatic fan speed control registers */
@@ -832,7 +837,9 @@ static ssize_t set_pwm_enable(struct device *dev,
 				 data->fan_main_ctrl);
 	} else {
 		if (val == 1)				/* Manual mode */
-			data->pwm_ctrl[nr] = data->pwm_duty[nr];
+			data->pwm_ctrl[nr] = data->type == it8721 ?
+					     data->pwm_temp_map[nr] :
+					     data->pwm_duty[nr];
 		else					/* Automatic mode */
 			data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
 		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
@@ -858,12 +865,25 @@ static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
-	data->pwm_duty[nr] = pwm_to_reg(data, val);
-	/* If we are in manual mode, write the duty cycle immediately;
-	 * otherwise, just store it for later use. */
-	if (!(data->pwm_ctrl[nr] & 0x80)) {
-		data->pwm_ctrl[nr] = data->pwm_duty[nr];
-		it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+	if (data->type == it8721) {
+		/* If we are in automatic mode, the PWM duty cycle register
+		 * is read-only so we can't write the value */
+		if (data->pwm_ctrl[nr] & 0x80) {
+			mutex_unlock(&data->update_lock);
+			return -EBUSY;
+		}
+		data->pwm_duty[nr] = pwm_to_reg(data, val);
+		it87_write_value(data, IT87_REG_PWM_DUTY(nr),
+				 data->pwm_duty[nr]);
+	} else {
+		data->pwm_duty[nr] = pwm_to_reg(data, val);
+		/* If we are in manual mode, write the duty cycle immediately;
+		 * otherwise, just store it for later use. */
+		if (!(data->pwm_ctrl[nr] & 0x80)) {
+			data->pwm_ctrl[nr] = data->pwm_duty[nr];
+			it87_write_value(data, IT87_REG_PWM(nr),
+					 data->pwm_ctrl[nr]);
+		}
 	}
 	mutex_unlock(&data->update_lock);
 	return count;
@@ -1958,7 +1978,10 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 	 *   channels to use when later setting to automatic mode later.
 	 *   Use a 1:1 mapping by default (we are clueless.)
 	 * In both cases, the value can (and should) be changed by the user
-	 * prior to switching to a different mode. */
+	 * prior to switching to a different mode.
+	 * Note that this is no longer needed for the IT8721F and later, as
+	 * these have separate registers for the temperature mapping and the
+	 * manual duty cycle. */
 	for (i = 0; i < 3; i++) {
 		data->pwm_temp_map[i] = i;
 		data->pwm_duty[i] = 0x7f;	/* Full speed */
@@ -2034,10 +2057,16 @@ static void __devinit it87_init_device(struct platform_device *pdev)
 static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
 {
 	data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
-	if (data->pwm_ctrl[nr] & 0x80)	/* Automatic mode */
+	if (data->type == it8721) {
 		data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
-	else				/* Manual mode */
-		data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+		data->pwm_duty[nr] = it87_read_value(data,
+						     IT87_REG_PWM_DUTY(nr));
+	} else {
+		if (data->pwm_ctrl[nr] & 0x80)	/* Automatic mode */
+			data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+		else				/* Manual mode */
+			data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+	}
 
 	if (has_old_autopwm(data)) {
 		int i;
diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
index 9f4bae07f71..8853afce85c 100644
--- a/drivers/hwmon/lis3lv02d_i2c.c
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -186,7 +186,7 @@ static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int lis3lv02d_i2c_suspend(struct device *dev)
 {
 	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -213,12 +213,9 @@ static int lis3lv02d_i2c_resume(struct device *dev)
 
 	return 0;
 }
-#else
-#define lis3lv02d_i2c_suspend	NULL
-#define lis3lv02d_i2c_resume	NULL
-#define lis3lv02d_i2c_shutdown	NULL
-#endif
+#endif /* CONFIG_PM_SLEEP */
 
+#ifdef CONFIG_PM_RUNTIME
 static int lis3_i2c_runtime_suspend(struct device *dev)
 {
 	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
@@ -236,6 +233,7 @@ static int lis3_i2c_runtime_resume(struct device *dev)
 	lis3lv02d_poweron(lis3);
 	return 0;
 }
+#endif /* CONFIG_PM_RUNTIME */
 
 static const struct i2c_device_id lis3lv02d_id[] = {
 	{"lis3lv02d", 0 },
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index 6669255aadc..c9ed14eba5a 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -20,7 +20,7 @@
     Adapted to 2.6.20 by Carsten Emde <cbe@osadl.org>
         Copyright (c) 2006 Carsten Emde, Open Source Automation Development Lab
 
-    Modified for mainline integration by Hans J. Koch <hjk@linutronix.de>
+    Modified for mainline integration by Hans J. Koch <hjk@hansjkoch.de>
         Copyright (c) 2007 Hans J. Koch, Linutronix GmbH
 
     This program is free software; you can redistribute it and/or modify
@@ -2629,7 +2629,7 @@ static void __exit lm93_exit(void)
 }
 
 MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>, "
-		"Hans J. Koch <hjk@linutronix.de");
+		"Hans J. Koch <hjk@hansjkoch.de>");
 MODULE_DESCRIPTION("LM93 driver");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/hwmon/lm95241.c b/drivers/hwmon/lm95241.c
index 464340f2549..4546d82f024 100644
--- a/drivers/hwmon/lm95241.c
+++ b/drivers/hwmon/lm95241.c
@@ -128,9 +128,12 @@ static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm95241_data *data = i2c_get_clientdata(client);
+	unsigned long val;
 
-	strict_strtol(buf, 10, &data->interval);
-	data->interval = data->interval * HZ / 1000;
+	if (strict_strtoul(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	data->interval = val * HZ / 1000;
 
 	return count;
 }
@@ -188,7 +191,9 @@ static ssize_t set_type##flag(struct device *dev, \
 	struct lm95241_data *data = i2c_get_clientdata(client); \
 \
 	long val; \
-	strict_strtol(buf, 10, &val); \
+\
+	if (strict_strtol(buf, 10, &val) < 0) \
+		return -EINVAL; \
 \
 	if ((val == 1) || (val == 2)) { \
 \
@@ -227,7 +232,9 @@ static ssize_t set_min##flag(struct device *dev, \
 	struct lm95241_data *data = i2c_get_clientdata(client); \
 \
 	long val; \
-	strict_strtol(buf, 10, &val); \
+\
+	if (strict_strtol(buf, 10, &val) < 0) \
+		return -EINVAL;\
 \
 	mutex_lock(&data->update_lock); \
 \
@@ -256,7 +263,9 @@ static ssize_t set_max##flag(struct device *dev, \
 	struct lm95241_data *data = i2c_get_clientdata(client); \
 \
 	long val; \
-	strict_strtol(buf, 10, &val); \
+\
+	if (strict_strtol(buf, 10, &val) < 0) \
+		return -EINVAL; \
 \
 	mutex_lock(&data->update_lock); \
 \
diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 00d975eb5b8..c7e6d8e8165 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -205,7 +205,6 @@ LTC4215_ALARM(curr1_max_alarm,	(1 << 2),	LTC4215_STATUS);
 
 /* Power (virtual) */
 LTC4215_POWER(power1_input);
-LTC4215_ALARM(power1_alarm,	(1 << 3),	LTC4215_STATUS);
 
 /* Input Voltage */
 LTC4215_VOLTAGE(in1_input,			LTC4215_ADIN);
@@ -214,6 +213,7 @@ LTC4215_ALARM(in1_min_alarm,	(1 << 1),	LTC4215_STATUS);
 
 /* Output Voltage */
 LTC4215_VOLTAGE(in2_input,			LTC4215_SOURCE);
+LTC4215_ALARM(in2_min_alarm,	(1 << 3),	LTC4215_STATUS);
 
 /* Finally, construct an array of pointers to members of the above objects,
  * as required for sysfs_create_group()
@@ -223,13 +223,13 @@ static struct attribute *ltc4215_attributes[] = {
 	&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_power1_input.dev_attr.attr,
-	&sensor_dev_attr_power1_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_in1_input.dev_attr.attr,
 	&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
 	&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
 
 	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min_alarm.dev_attr.attr,
 
 	NULL,
 };
diff --git a/drivers/hwmon/max6650.c b/drivers/hwmon/max6650.c
index a0160ee5cae..9a11532ecae 100644
--- a/drivers/hwmon/max6650.c
+++ b/drivers/hwmon/max6650.c
@@ -2,7 +2,7 @@
  * max6650.c - Part of lm_sensors, Linux kernel modules for hardware
  *             monitoring.
  *
- * (C) 2007 by Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
  *
  * based on code written by John Morris <john.morris@spirentcom.com>
  * Copyright (c) 2003 Spirent Communications
diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c
index 05248f2d758..92b42db43bc 100644
--- a/drivers/hwmon/s3c-hwmon.c
+++ b/drivers/hwmon/s3c-hwmon.c
@@ -234,7 +234,6 @@ static int s3c_hwmon_create_attr(struct device *dev,
 	attr->index = channel;
 	attr->dev_attr.attr.name  = attrs->in_name;
 	attr->dev_attr.attr.mode  = S_IRUGO;
-	attr->dev_attr.attr.owner = THIS_MODULE;
 	attr->dev_attr.show = s3c_hwmon_ch_show;
 
 	ret =  device_create_file(dev, &attr->dev_attr);
@@ -252,7 +251,6 @@ static int s3c_hwmon_create_attr(struct device *dev,
 		attr->index = channel;
 		attr->dev_attr.attr.name  = attrs->label_name;
 		attr->dev_attr.attr.mode  = S_IRUGO;
-		attr->dev_attr.attr.owner = THIS_MODULE;
 		attr->dev_attr.show = s3c_hwmon_label_show;
 
 		ret = device_create_file(dev, &attr->dev_attr);
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 1d840aa8378..cdbc7448491 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -165,10 +165,14 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 
 #define W83795_REG_VID_CTRL		0x6A
 
+#define W83795_REG_ALARM_CTRL		0x40
+#define ALARM_CTRL_RTSACS		(1 << 7)
 #define W83795_REG_ALARM(index)		(0x41 + (index))
+#define W83795_REG_CLR_CHASSIS		0x4D
 #define W83795_REG_BEEP(index)		(0x50 + (index))
 
-#define W83795_REG_CLR_CHASSIS		0x4D
+#define W83795_REG_OVT_CFG		0x58
+#define OVT_CFG_SEL			(1 << 7)
 
 
 #define W83795_REG_FCMS1		0x201
@@ -178,6 +182,14 @@ static const u8 IN_LSB_SHIFT_IDX[][2] = {
 
 #define W83795_REG_TSS(index)		(0x209 + (index))
 
+#define TSS_MAP_RESERVED		0xff
+static const u8 tss_map[4][6] = {
+	{ 0,  1,  2,  3,  4,  5},
+	{ 6,  7,  8,  9,  0,  1},
+	{10, 11, 12, 13,  2,  3},
+	{ 4,  5,  4,  5, TSS_MAP_RESERVED, TSS_MAP_RESERVED},
+};
+
 #define PWM_OUTPUT			0
 #define PWM_FREQ			1
 #define PWM_START			2
@@ -369,6 +381,7 @@ struct w83795_data {
 	u8 setup_pwm[3];	/* Register value */
 
 	u8 alarms[6];		/* Register value */
+	u8 enable_beep;
 	u8 beeps[6];		/* Register value */
 
 	char valid;
@@ -499,8 +512,11 @@ static void w83795_update_limits(struct i2c_client *client)
 	}
 
 	/* Read beep settings */
-	for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
-		data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
+			data->beeps[i] =
+				w83795_read(client, W83795_REG_BEEP(i));
+	}
 
 	data->valid_limits = 1;
 }
@@ -577,6 +593,7 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct w83795_data *data = i2c_get_clientdata(client);
 	u16 tmp;
+	u8 intrusion;
 	int i;
 
 	mutex_lock(&data->update_lock);
@@ -648,9 +665,24 @@ static struct w83795_data *w83795_update_device(struct device *dev)
 		    w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
 	}
 
-	/* update alarm */
+	/* Update intrusion and alarms
+	 * It is important to read intrusion first, because reading from
+	 * register SMI STS6 clears the interrupt status temporarily. */
+	tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
+	/* Switch to interrupt status for intrusion if needed */
+	if (tmp & ALARM_CTRL_RTSACS)
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
+	intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6);
+	/* Switch to real-time alarms */
+	w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS);
 	for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
 		data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
+	data->alarms[5] |= intrusion;
+	/* Restore original configuration if needed */
+	if (!(tmp & ALARM_CTRL_RTSACS))
+		w83795_write(client, W83795_REG_ALARM_CTRL,
+			     tmp & ~ALARM_CTRL_RTSACS);
 
 	data->last_updated = jiffies;
 	data->valid = 1;
@@ -730,6 +762,10 @@ store_chassis_clear(struct device *dev,
 	val = w83795_read(client, W83795_REG_CLR_CHASSIS);
 	val |= 0x80;
 	w83795_write(client, W83795_REG_CLR_CHASSIS, val);
+
+	/* Clear status and force cache refresh */
+	w83795_read(client, W83795_REG_ALARM(5));
+	data->valid = 0;
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -857,20 +893,20 @@ show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
 	int index = sensor_attr->index;
 	u8 tmp;
 
-	if (1 == (data->pwm_fcms[0] & (1 << index))) {
+	/* Speed cruise mode */
+	if (data->pwm_fcms[0] & (1 << index)) {
 		tmp = 2;
 		goto out;
 	}
+	/* Thermal cruise or SmartFan IV mode */
 	for (tmp = 0; tmp < 6; tmp++) {
 		if (data->pwm_tfmr[tmp] & (1 << index)) {
 			tmp = 3;
 			goto out;
 		}
 	}
-	if (data->pwm_fomc & (1 << index))
-		tmp = 0;
-	else
-		tmp = 1;
+	/* Manual mode */
+	tmp = 1;
 
 out:
 	return sprintf(buf, "%u\n", tmp);
@@ -890,23 +926,21 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 
 	if (strict_strtoul(buf, 10, &val) < 0)
 		return -EINVAL;
-	if (val > 2)
+	if (val < 1 || val > 2)
 		return -EINVAL;
 
 	mutex_lock(&data->update_lock);
 	switch (val) {
-	case 0:
 	case 1:
+		/* Clear speed cruise mode bits */
 		data->pwm_fcms[0] &= ~(1 << index);
 		w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
+		/* Clear thermal cruise mode bits */
 		for (i = 0; i < 6; i++) {
 			data->pwm_tfmr[i] &= ~(1 << index);
 			w83795_write(client, W83795_REG_TFMR(i),
 				data->pwm_tfmr[i]);
 		}
-		data->pwm_fomc |= 1 << index;
-		data->pwm_fomc ^= val << index;
-		w83795_write(client, W83795_REG_FOMC, data->pwm_fomc);
 		break;
 	case 2:
 		data->pwm_fcms[0] |= (1 << index);
@@ -918,23 +952,60 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
+show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct w83795_data *data = w83795_update_pwm_config(dev);
+	int index = to_sensor_dev_attr_2(attr)->index;
+	unsigned int mode;
+
+	if (data->pwm_fomc & (1 << index))
+		mode = 0;	/* DC */
+	else
+		mode = 1;	/* PWM */
+
+	return sprintf(buf, "%u\n", mode);
+}
+
+/*
+ * Check whether a given temperature source can ever be useful.
+ * Returns the number of selectable temperature channels which are
+ * enabled.
+ */
+static int w83795_tss_useful(const struct w83795_data *data, int tsrc)
+{
+	int useful = 0, i;
+
+	for (i = 0; i < 4; i++) {
+		if (tss_map[i][tsrc] == TSS_MAP_RESERVED)
+			continue;
+		if (tss_map[i][tsrc] < 6)	/* Analog */
+			useful += (data->has_temp >> tss_map[i][tsrc]) & 1;
+		else				/* Digital */
+			useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1;
+	}
+
+	return useful;
+}
+
+static ssize_t
 show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct sensor_device_attribute_2 *sensor_attr =
 	    to_sensor_dev_attr_2(attr);
 	struct w83795_data *data = w83795_update_pwm_config(dev);
 	int index = sensor_attr->index;
-	u8 val = index / 2;
-	u8 tmp = data->temp_src[val];
+	u8 tmp = data->temp_src[index / 2];
 
 	if (index & 1)
-		val = 4;
+		tmp >>= 4;	/* Pick high nibble */
 	else
-		val = 0;
-	tmp >>= val;
-	tmp &= 0x0f;
+		tmp &= 0x0f;	/* Pick low nibble */
 
-	return sprintf(buf, "%u\n", tmp);
+	/* Look-up the actual temperature channel number */
+	if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED)
+		return -EINVAL;		/* Shouldn't happen */
+
+	return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1);
 }
 
 static ssize_t
@@ -946,12 +1017,21 @@ store_temp_src(struct device *dev, struct device_attribute *attr,
 	struct sensor_device_attribute_2 *sensor_attr =
 	    to_sensor_dev_attr_2(attr);
 	int index = sensor_attr->index;
-	unsigned long tmp;
+	int tmp;
+	unsigned long channel;
 	u8 val = index / 2;
 
-	if (strict_strtoul(buf, 10, &tmp) < 0)
+	if (strict_strtoul(buf, 10, &channel) < 0 ||
+	    channel < 1 || channel > 14)
+		return -EINVAL;
+
+	/* Check if request can be fulfilled */
+	for (tmp = 0; tmp < 4; tmp++) {
+		if (tss_map[tmp][index] == channel - 1)
+			break;
+	}
+	if (tmp == 4)	/* No match */
 		return -EINVAL;
-	tmp = SENSORS_LIMIT(tmp, 0, 15);
 
 	mutex_lock(&data->update_lock);
 	if (index & 1) {
@@ -1515,7 +1595,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 
 #define NOT_USED			-1
 
-/* Don't change the attribute order, _max and _min are accessed by index
+/* Don't change the attribute order, _max, _min and _beep are accessed by index
  * somewhere else in the code */
 #define SENSOR_ATTR_IN(index) {						\
 	SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL,	\
@@ -1530,6 +1610,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + ((index > 14) ? 1 : 0)) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_FAN(index) {					\
 	SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan,		\
 		NULL, FAN_INPUT, index - 1), \
@@ -1553,9 +1635,13 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 		show_pwm, store_pwm, PWM_FREQ, index - 1),	 \
 	SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO,		\
 		show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
+	SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO,			\
+		show_pwm_mode, NULL, NOT_USED, index - 1),		\
 	SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
 		show_fanin, store_fanin, FANIN_TARGET, index - 1) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_DTS(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO ,		\
 		show_dts_mode, NULL, NOT_USED, index - 7),	\
@@ -1574,6 +1660,8 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
 
+/* Don't change the attribute order, _beep is accessed by index
+ * somewhere else in the code */
 #define SENSOR_ATTR_TEMP(index) {					\
 	SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
 		show_temp_mode, store_temp_mode, NOT_USED, index - 1),	\
@@ -1593,8 +1681,6 @@ store_sf_setup(struct device *dev, struct device_attribute *attr,
 	SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO,		\
 		show_alarm_beep, store_beep, BEEP_ENABLE,		\
 		index + (index > 4 ? 11 : 17)),				\
-	SENSOR_ATTR_2(temp##index##_source_sel, S_IWUSR | S_IRUGO,	\
-		show_temp_src, store_temp_src, NOT_USED, index - 1),	\
 	SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO,	\
 		show_temp_pwm_enable, store_temp_pwm_enable,		\
 		TEMP_PWM_ENABLE, index - 1),				\
@@ -1680,7 +1766,7 @@ static const struct sensor_device_attribute_2 w83795_fan[][4] = {
 	SENSOR_ATTR_FAN(14),
 };
 
-static const struct sensor_device_attribute_2 w83795_temp[][29] = {
+static const struct sensor_device_attribute_2 w83795_temp[][28] = {
 	SENSOR_ATTR_TEMP(1),
 	SENSOR_ATTR_TEMP(2),
 	SENSOR_ATTR_TEMP(3),
@@ -1700,7 +1786,7 @@ static const struct sensor_device_attribute_2 w83795_dts[][8] = {
 	SENSOR_ATTR_DTS(14),
 };
 
-static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
+static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
 	SENSOR_ATTR_PWM(1),
 	SENSOR_ATTR_PWM(2),
 	SENSOR_ATTR_PWM(3),
@@ -1711,13 +1797,24 @@ static const struct sensor_device_attribute_2 w83795_pwm[][7] = {
 	SENSOR_ATTR_PWM(8),
 };
 
+static const struct sensor_device_attribute_2 w83795_tss[6] = {
+	SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 0),
+	SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 1),
+	SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 2),
+	SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 3),
+	SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 4),
+	SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO,
+		      show_temp_src, store_temp_src, NOT_USED, 5),
+};
+
 static const struct sensor_device_attribute_2 sda_single_files[] = {
 	SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
 		      store_chassis_clear, ALARM_STATUS, 46),
-	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
-		      store_beep, BEEP_ENABLE, 46),
-	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
-		      store_beep, BEEP_ENABLE, 47),
 #ifdef CONFIG_SENSORS_W83795_FANCTRL
 	SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
 		store_fanin, FANIN_TOL, NOT_USED),
@@ -1730,6 +1827,13 @@ static const struct sensor_device_attribute_2 sda_single_files[] = {
 #endif
 };
 
+static const struct sensor_device_attribute_2 sda_beep_files[] = {
+	SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 46),
+	SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
+		      store_beep, BEEP_ENABLE, 47),
+};
+
 /*
  * Driver interface
  */
@@ -1859,6 +1963,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		if (!(data->has_in & (1 << i)))
 			continue;
 		for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
+			if (j == 4 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_in[i][j].dev_attr);
 			if (err)
 				return err;
@@ -1869,18 +1975,37 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 		if (!(data->has_fan & (1 << i)))
 			continue;
 		for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
+			if (j == 3 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_fan[i][j].dev_attr);
 			if (err)
 				return err;
 		}
 	}
 
+	for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) {
+		j = w83795_tss_useful(data, i);
+		if (!j)
+			continue;
+		err = fn(dev, &w83795_tss[i].dev_attr);
+		if (err)
+			return err;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
 		err = fn(dev, &sda_single_files[i].dev_attr);
 		if (err)
 			return err;
 	}
 
+	if (data->enable_beep) {
+		for (i = 0; i < ARRAY_SIZE(sda_beep_files); i++) {
+			err = fn(dev, &sda_beep_files[i].dev_attr);
+			if (err)
+				return err;
+		}
+	}
+
 #ifdef CONFIG_SENSORS_W83795_FANCTRL
 	for (i = 0; i < data->has_pwm; i++) {
 		for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
@@ -1899,6 +2024,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 #else
 		for (j = 0; j < 8; j++) {
 #endif
+			if (j == 7 && !data->enable_beep)
+				continue;
 			err = fn(dev, &w83795_temp[i][j].dev_attr);
 			if (err)
 				return err;
@@ -1910,6 +2037,8 @@ static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
 			if (!(data->has_dts & (1 << i)))
 				continue;
 			for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
+				if (j == 7 && !data->enable_beep)
+					continue;
 				err = fn(dev, &w83795_dts[i][j].dev_attr);
 				if (err)
 					return err;
@@ -2049,6 +2178,18 @@ static int w83795_probe(struct i2c_client *client,
 	else
 		data->has_pwm = 2;
 
+	/* Check if BEEP pin is available */
+	if (data->chip_type == w83795g) {
+		/* The W83795G has a dedicated BEEP pin */
+		data->enable_beep = 1;
+	} else {
+		/* The W83795ADG has a shared pin for OVT# and BEEP, so you
+		 * can't have both */
+		tmp = w83795_read(client, W83795_REG_OVT_CFG);
+		if ((tmp & OVT_CFG_SEL) == 0)
+			data->enable_beep = 1;
+	}
+
 	err = w83795_handle_files(dev, device_create_file);
 	if (err)
 		goto exit_remove;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index b923074b2cb..30f06e956bf 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -75,8 +75,7 @@ config I2C_HELPER_AUTO
 	  In doubt, say Y.
 
 config I2C_SMBUS
-	tristate
-	prompt "SMBus-specific protocols" if !I2C_HELPER_AUTO
+	tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
 	help
 	  Say Y here if you want support for SMBus extensions to the I2C
 	  specification. At the moment, the only supported extension is
diff --git a/drivers/i2c/algos/Kconfig b/drivers/i2c/algos/Kconfig
index 3998dd620a0..f1cfe7e5508 100644
--- a/drivers/i2c/algos/Kconfig
+++ b/drivers/i2c/algos/Kconfig
@@ -3,7 +3,7 @@
 #
 
 menu "I2C Algorithms"
-	depends on !I2C_HELPER_AUTO
+	visible if !I2C_HELPER_AUTO
 
 config I2C_ALGOBIT
 	tristate "I2C bit-banging interfaces"
@@ -15,15 +15,3 @@ config I2C_ALGOPCA
 	tristate "I2C PCA 9564 interfaces"
 
 endmenu
-
-# In automatic configuration mode, we still have to define the
-# symbols to avoid unmet dependencies.
-
-if I2C_HELPER_AUTO
-config I2C_ALGOBIT
-	tristate
-config I2C_ALGOPCF
-	tristate
-config I2C_ALGOPCA
-	tristate
-endif
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
index 80f70d3a744..c71492782bb 100644
--- a/drivers/i2c/busses/i2c-intel-mid.c
+++ b/drivers/i2c/busses/i2c-intel-mid.c
@@ -999,7 +999,7 @@ static int __devinit intel_mid_i2c_probe(struct pci_dev *dev,
 
 	/* Initialize struct members */
 	snprintf(mrst->adap.name, sizeof(mrst->adap.name),
-		"MRST/Medfield I2C at %lx", start);
+		"Intel MID I2C at %lx", start);
 	mrst->adap.owner = THIS_MODULE;
 	mrst->adap.algo = &intel_mid_i2c_algorithm;
 	mrst->adap.dev.parent = &dev->dev;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index b33c78586bf..9d090833e24 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -39,6 +39,7 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/i2c-omap.h>
+#include <linux/pm_runtime.h>
 
 /* I2C controller revisions */
 #define OMAP_I2C_REV_2			0x20
@@ -175,8 +176,6 @@ struct omap_i2c_dev {
 	void __iomem		*base;		/* virtual */
 	int			irq;
 	int			reg_shift;      /* bit shift for I2C register addresses */
-	struct clk		*iclk;		/* Interface clock */
-	struct clk		*fclk;		/* Functional clock */
 	struct completion	cmd_complete;
 	struct resource		*ioarea;
 	u32			latency;	/* maximum mpu wkup latency */
@@ -265,45 +264,18 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
-static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
+static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 {
-	int ret;
+	struct platform_device *pdev;
+	struct omap_i2c_bus_platform_data *pdata;
 
-	dev->iclk = clk_get(dev->dev, "ick");
-	if (IS_ERR(dev->iclk)) {
-		ret = PTR_ERR(dev->iclk);
-		dev->iclk = NULL;
-		return ret;
-	}
+	WARN_ON(!dev->idle);
 
-	dev->fclk = clk_get(dev->dev, "fck");
-	if (IS_ERR(dev->fclk)) {
-		ret = PTR_ERR(dev->fclk);
-		if (dev->iclk != NULL) {
-			clk_put(dev->iclk);
-			dev->iclk = NULL;
-		}
-		dev->fclk = NULL;
-		return ret;
-	}
+	pdev = to_platform_device(dev->dev);
+	pdata = pdev->dev.platform_data;
 
-	return 0;
-}
+	pm_runtime_get_sync(&pdev->dev);
 
-static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
-{
-	clk_put(dev->fclk);
-	dev->fclk = NULL;
-	clk_put(dev->iclk);
-	dev->iclk = NULL;
-}
-
-static void omap_i2c_unidle(struct omap_i2c_dev *dev)
-{
-	WARN_ON(!dev->idle);
-
-	clk_enable(dev->iclk);
-	clk_enable(dev->fclk);
 	if (cpu_is_omap34xx()) {
 		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 		omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
@@ -326,10 +298,15 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
 
 static void omap_i2c_idle(struct omap_i2c_dev *dev)
 {
+	struct platform_device *pdev;
+	struct omap_i2c_bus_platform_data *pdata;
 	u16 iv;
 
 	WARN_ON(dev->idle);
 
+	pdev = to_platform_device(dev->dev);
+	pdata = pdev->dev.platform_data;
+
 	dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
 	if (dev->rev >= OMAP_I2C_REV_ON_4430)
 		omap_i2c_write_reg(dev, OMAP_I2C_IRQENABLE_CLR, 1);
@@ -345,8 +322,8 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
 		omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
 	}
 	dev->idle = 1;
-	clk_disable(dev->fclk);
-	clk_disable(dev->iclk);
+
+	pm_runtime_put_sync(&pdev->dev);
 }
 
 static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -356,6 +333,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 	unsigned long fclk_rate = 12000000;
 	unsigned long timeout;
 	unsigned long internal_clk = 0;
+	struct clk *fclk;
 
 	if (dev->rev >= OMAP_I2C_REV_2) {
 		/* Disable I2C controller before soft reset */
@@ -414,7 +392,9 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 		 * always returns 12MHz for the functional clock, we can
 		 * do this bit unconditionally.
 		 */
-		fclk_rate = clk_get_rate(dev->fclk);
+		fclk = clk_get(dev->dev, "fck");
+		fclk_rate = clk_get_rate(fclk);
+		clk_put(fclk);
 
 		/* TRM for 5912 says the I2C clock must be prescaled to be
 		 * between 7 - 12 MHz. The XOR input clock is typically
@@ -443,7 +423,9 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
 			internal_clk = 9600;
 		else
 			internal_clk = 4000;
-		fclk_rate = clk_get_rate(dev->fclk) / 1000;
+		fclk = clk_get(dev->dev, "fck");
+		fclk_rate = clk_get_rate(fclk) / 1000;
+		clk_put(fclk);
 
 		/* Compute prescaler divisor */
 		psc = fclk_rate / internal_clk;
@@ -1048,14 +1030,12 @@ omap_i2c_probe(struct platform_device *pdev)
 	else
 		dev->reg_shift = 2;
 
-	if ((r = omap_i2c_get_clocks(dev)) != 0)
-		goto err_iounmap;
-
 	if (cpu_is_omap44xx())
 		dev->regs = (u8 *) omap4_reg_map;
 	else
 		dev->regs = (u8 *) reg_map;
 
+	pm_runtime_enable(&pdev->dev);
 	omap_i2c_unidle(dev);
 
 	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
@@ -1127,8 +1107,6 @@ err_free_irq:
 err_unuse_clocks:
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
 	omap_i2c_idle(dev);
-	omap_i2c_put_clocks(dev);
-err_iounmap:
 	iounmap(dev->base);
 err_free_mem:
 	platform_set_drvdata(pdev, NULL);
@@ -1150,7 +1128,6 @@ omap_i2c_remove(struct platform_device *pdev)
 	free_irq(dev->irq, dev);
 	i2c_del_adapter(&dev->adapter);
 	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
-	omap_i2c_put_clocks(dev);
 	iounmap(dev->base);
 	kfree(dev);
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1162,7 +1139,7 @@ static struct platform_driver omap_i2c_driver = {
 	.probe		= omap_i2c_probe,
 	.remove		= omap_i2c_remove,
 	.driver		= {
-		.name	= "i2c_omap",
+		.name	= "omap_i2c",
 		.owner	= THIS_MODULE,
 	},
 };
@@ -1184,4 +1161,4 @@ module_exit(omap_i2c_exit_driver);
 MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
 MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:i2c_omap");
+MODULE_ALIAS("platform:omap_i2c");
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index d231f683f57..6b4cc567645 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -848,6 +848,18 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 		goto out_list;
 	}
 
+	/* Sanity checks */
+	if (unlikely(adap->name[0] == '\0')) {
+		pr_err("i2c-core: Attempt to register an adapter with "
+		       "no name!\n");
+		return -EINVAL;
+	}
+	if (unlikely(!adap->algo)) {
+		pr_err("i2c-core: Attempt to register adapter '%s' with "
+		       "no algo!\n", adap->name);
+		return -EINVAL;
+	}
+
 	rt_mutex_init(&adap->bus_lock);
 	mutex_init(&adap->userspace_clients_lock);
 	INIT_LIST_HEAD(&adap->userspace_clients);
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index d32a4843fc3..d7a4833be41 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -120,7 +120,6 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
 	snprintf(priv->adap.name, sizeof(priv->adap.name),
 		 "i2c-%d-mux (chan_id %d)", i2c_adapter_id(parent), chan_id);
 	priv->adap.owner = THIS_MODULE;
-	priv->adap.id = parent->id;
 	priv->adap.algo = &priv->algo;
 	priv->adap.algo_data = priv;
 	priv->adap.dev.parent = &parent->dev;
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 41665d2f9f9..56ac09d6c93 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -220,9 +220,8 @@ static int intel_idle(struct cpuidle_device *dev, struct cpuidle_state *state)
 	kt_before = ktime_get_real();
 
 	stop_critical_timings();
-#ifndef MODULE
 	trace_power_start(POWER_CSTATE, (eax >> 4) + 1, cpu);
-#endif
+	trace_cpu_idle((eax >> 4) + 1, cpu);
 	if (!need_resched()) {
 
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
@@ -273,8 +272,6 @@ static int intel_idle_probe(void)
 
 	pr_debug(PREFIX "MWAIT substates: 0x%x\n", mwait_substates);
 
-	if (boot_cpu_has(X86_FEATURE_ARAT))	/* Always Reliable APIC Timer */
-		lapic_timer_reliable_states = 0xFFFFFFFF;
 
 	if (boot_cpu_data.x86 != 6)	/* family 6 */
 		return -ENODEV;
@@ -286,8 +283,6 @@ static int intel_idle_probe(void)
 	case 0x1F:	/* Core i7 and i5 Processor - Nehalem */
 	case 0x2E:	/* Nehalem-EX Xeon */
 	case 0x2F:	/* Westmere-EX Xeon */
-		lapic_timer_reliable_states = (1 << 1);	 /* C1 */
-
 	case 0x25:	/* Westmere */
 	case 0x2C:	/* Westmere */
 		cpuidle_state_table = nehalem_cstates;
@@ -295,7 +290,6 @@ static int intel_idle_probe(void)
 
 	case 0x1C:	/* 28 - Atom Processor */
 	case 0x26:	/* 38 - Lincroft Atom Processor */
-		lapic_timer_reliable_states = (1 << 1); /* C1 */
 		cpuidle_state_table = atom_cstates;
 		break;
 
@@ -303,10 +297,6 @@ static int intel_idle_probe(void)
 	case 0x2D:	/* SNB Xeon */
 		cpuidle_state_table = snb_cstates;
 		break;
-#ifdef FUTURE_USE
-	case 0x17:	/* 23 - Core 2 Duo */
-		lapic_timer_reliable_states = (1 << 2) | (1 << 1); /* C2, C1 */
-#endif
 
 	default:
 		pr_debug(PREFIX "does not run on family %d model %d\n",
@@ -314,6 +304,9 @@ static int intel_idle_probe(void)
 		return -ENODEV;
 	}
 
+	if (boot_cpu_has(X86_FEATURE_ARAT))	/* Always Reliable APIC Timer */
+		lapic_timer_reliable_states = 0xFFFFFFFF;
+
 	pr_debug(PREFIX "v" INTEL_IDLE_VERSION
 		" model 0x%X\n", boot_cpu_data.x86_model);
 
diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c
index c15fd2ea56c..8aba0ba57de 100644
--- a/drivers/infiniband/core/addr.c
+++ b/drivers/infiniband/core/addr.c
@@ -130,8 +130,8 @@ int rdma_translate_ip(struct sockaddr *addr, struct rdma_dev_addr *dev_addr)
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 	case AF_INET6:
-		read_lock(&dev_base_lock);
-		for_each_netdev(&init_net, dev) {
+		rcu_read_lock();
+		for_each_netdev_rcu(&init_net, dev) {
 			if (ipv6_chk_addr(&init_net,
 					  &((struct sockaddr_in6 *) addr)->sin6_addr,
 					  dev, 1)) {
@@ -139,7 +139,7 @@ int rdma_translate_ip(struct sockaddr *addr, struct rdma_dev_addr *dev_addr)
 				break;
 			}
 		}
-		read_unlock(&dev_base_lock);
+		rcu_read_unlock();
 		break;
 #endif
 	}
diff --git a/drivers/infiniband/core/ud_header.c b/drivers/infiniband/core/ud_header.c
index bb7e1928082..9b737ff133e 100644
--- a/drivers/infiniband/core/ud_header.c
+++ b/drivers/infiniband/core/ud_header.c
@@ -278,36 +278,6 @@ void ib_ud_header_init(int     		    payload_bytes,
 EXPORT_SYMBOL(ib_ud_header_init);
 
 /**
- * ib_lrh_header_pack - Pack LRH header struct into wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_pack() packs the LRH header structure @lrh into
- * wire format in the buffer @buf.
- */
-int ib_lrh_header_pack(struct ib_unpacked_lrh *lrh, void *buf)
-{
-	ib_pack(lrh_table, ARRAY_SIZE(lrh_table), lrh, buf);
-	return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_pack);
-
-/**
- * ib_lrh_header_unpack - Unpack LRH structure from wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_unpack() unpacks the LRH header structure from
- * wire format (in buf) into @lrh.
- */
-int ib_lrh_header_unpack(void *buf, struct ib_unpacked_lrh *lrh)
-{
-	ib_unpack(lrh_table, ARRAY_SIZE(lrh_table), buf, lrh);
-	return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_unpack);
-
-/**
  * ib_ud_header_pack - Pack UD header struct into wire format
  * @header:UD header struct
  * @buf:Buffer to pack into
diff --git a/drivers/infiniband/core/uverbs_cmd.c b/drivers/infiniband/core/uverbs_cmd.c
index b342248aec0..c42699285f8 100644
--- a/drivers/infiniband/core/uverbs_cmd.c
+++ b/drivers/infiniband/core/uverbs_cmd.c
@@ -893,68 +893,81 @@ out:
 	return ret ? ret : in_len;
 }
 
+static int copy_wc_to_user(void __user *dest, struct ib_wc *wc)
+{
+	struct ib_uverbs_wc tmp;
+
+	tmp.wr_id		= wc->wr_id;
+	tmp.status		= wc->status;
+	tmp.opcode		= wc->opcode;
+	tmp.vendor_err		= wc->vendor_err;
+	tmp.byte_len		= wc->byte_len;
+	tmp.ex.imm_data		= (__u32 __force) wc->ex.imm_data;
+	tmp.qp_num		= wc->qp->qp_num;
+	tmp.src_qp		= wc->src_qp;
+	tmp.wc_flags		= wc->wc_flags;
+	tmp.pkey_index		= wc->pkey_index;
+	tmp.slid		= wc->slid;
+	tmp.sl			= wc->sl;
+	tmp.dlid_path_bits	= wc->dlid_path_bits;
+	tmp.port_num		= wc->port_num;
+	tmp.reserved		= 0;
+
+	if (copy_to_user(dest, &tmp, sizeof tmp))
+		return -EFAULT;
+
+	return 0;
+}
+
 ssize_t ib_uverbs_poll_cq(struct ib_uverbs_file *file,
 			  const char __user *buf, int in_len,
 			  int out_len)
 {
 	struct ib_uverbs_poll_cq       cmd;
-	struct ib_uverbs_poll_cq_resp *resp;
+	struct ib_uverbs_poll_cq_resp  resp;
+	u8 __user                     *header_ptr;
+	u8 __user                     *data_ptr;
 	struct ib_cq                  *cq;
-	struct ib_wc                  *wc;
-	int                            ret = 0;
-	int                            i;
-	int                            rsize;
+	struct ib_wc                   wc;
+	int                            ret;
 
 	if (copy_from_user(&cmd, buf, sizeof cmd))
 		return -EFAULT;
 
-	wc = kmalloc(cmd.ne * sizeof *wc, GFP_KERNEL);
-	if (!wc)
-		return -ENOMEM;
-
-	rsize = sizeof *resp + cmd.ne * sizeof(struct ib_uverbs_wc);
-	resp = kmalloc(rsize, GFP_KERNEL);
-	if (!resp) {
-		ret = -ENOMEM;
-		goto out_wc;
-	}
-
 	cq = idr_read_cq(cmd.cq_handle, file->ucontext, 0);
-	if (!cq) {
-		ret = -EINVAL;
-		goto out;
-	}
+	if (!cq)
+		return -EINVAL;
 
-	resp->count = ib_poll_cq(cq, cmd.ne, wc);
+	/* we copy a struct ib_uverbs_poll_cq_resp to user space */
+	header_ptr = (void __user *)(unsigned long) cmd.response;
+	data_ptr = header_ptr + sizeof resp;
 
-	put_cq_read(cq);
+	memset(&resp, 0, sizeof resp);
+	while (resp.count < cmd.ne) {
+		ret = ib_poll_cq(cq, 1, &wc);
+		if (ret < 0)
+			goto out_put;
+		if (!ret)
+			break;
+
+		ret = copy_wc_to_user(data_ptr, &wc);
+		if (ret)
+			goto out_put;
 
-	for (i = 0; i < resp->count; i++) {
-		resp->wc[i].wr_id 	   = wc[i].wr_id;
-		resp->wc[i].status 	   = wc[i].status;
-		resp->wc[i].opcode 	   = wc[i].opcode;
-		resp->wc[i].vendor_err 	   = wc[i].vendor_err;
-		resp->wc[i].byte_len 	   = wc[i].byte_len;
-		resp->wc[i].ex.imm_data    = (__u32 __force) wc[i].ex.imm_data;
-		resp->wc[i].qp_num 	   = wc[i].qp->qp_num;
-		resp->wc[i].src_qp 	   = wc[i].src_qp;
-		resp->wc[i].wc_flags 	   = wc[i].wc_flags;
-		resp->wc[i].pkey_index 	   = wc[i].pkey_index;
-		resp->wc[i].slid 	   = wc[i].slid;
-		resp->wc[i].sl 		   = wc[i].sl;
-		resp->wc[i].dlid_path_bits = wc[i].dlid_path_bits;
-		resp->wc[i].port_num 	   = wc[i].port_num;
+		data_ptr += sizeof(struct ib_uverbs_wc);
+		++resp.count;
 	}
 
-	if (copy_to_user((void __user *) (unsigned long) cmd.response, resp, rsize))
+	if (copy_to_user(header_ptr, &resp, sizeof resp)) {
 		ret = -EFAULT;
+		goto out_put;
+	}
 
-out:
-	kfree(resp);
+	ret = in_len;
 
-out_wc:
-	kfree(wc);
-	return ret ? ret : in_len;
+out_put:
+	put_cq_read(cq);
+	return ret;
 }
 
 ssize_t ib_uverbs_req_notify_cq(struct ib_uverbs_file *file,
diff --git a/drivers/infiniband/core/uverbs_marshall.c b/drivers/infiniband/core/uverbs_marshall.c
index 5440da0e59b..1b1146f8712 100644
--- a/drivers/infiniband/core/uverbs_marshall.c
+++ b/drivers/infiniband/core/uverbs_marshall.c
@@ -40,18 +40,21 @@ void ib_copy_ah_attr_to_user(struct ib_uverbs_ah_attr *dst,
 	dst->grh.sgid_index        = src->grh.sgid_index;
 	dst->grh.hop_limit         = src->grh.hop_limit;
 	dst->grh.traffic_class     = src->grh.traffic_class;
+	memset(&dst->grh.reserved, 0, sizeof(dst->grh.reserved));
 	dst->dlid 	    	   = src->dlid;
 	dst->sl   	    	   = src->sl;
 	dst->src_path_bits 	   = src->src_path_bits;
 	dst->static_rate   	   = src->static_rate;
 	dst->is_global             = src->ah_flags & IB_AH_GRH ? 1 : 0;
 	dst->port_num 	    	   = src->port_num;
+	dst->reserved 		   = 0;
 }
 EXPORT_SYMBOL(ib_copy_ah_attr_to_user);
 
 void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
 			     struct ib_qp_attr *src)
 {
+	dst->qp_state	        = src->qp_state;
 	dst->cur_qp_state	= src->cur_qp_state;
 	dst->path_mtu		= src->path_mtu;
 	dst->path_mig_state	= src->path_mig_state;
@@ -83,6 +86,7 @@ void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
 	dst->rnr_retry		= src->rnr_retry;
 	dst->alt_port_num	= src->alt_port_num;
 	dst->alt_timeout	= src->alt_timeout;
+	memset(dst->reserved, 0, sizeof(dst->reserved));
 }
 EXPORT_SYMBOL(ib_copy_qp_attr_to_user);
 
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 6078992da3f..9292a15ad7c 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -40,7 +40,6 @@
 #include <linux/highmem.h>
 #include <linux/io.h>
 #include <linux/jiffies.h>
-#include <linux/smp_lock.h>
 #include <asm/pgtable.h>
 
 #include "ipath_kernel.h"
diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index 8c8afc716b9..31ae1b108ae 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -277,18 +277,14 @@ static int remove_file(struct dentry *parent, char *name)
 		goto bail;
 	}
 
-	spin_lock(&dcache_lock);
 	spin_lock(&tmp->d_lock);
 	if (!(d_unhashed(tmp) && tmp->d_inode)) {
-		dget_locked(tmp);
+		dget_dlock(tmp);
 		__d_drop(tmp);
 		spin_unlock(&tmp->d_lock);
-		spin_unlock(&dcache_lock);
 		simple_unlink(parent->d_inode, tmp);
-	} else {
+	} else
 		spin_unlock(&tmp->d_lock);
-		spin_unlock(&dcache_lock);
-	}
 
 	ret = 0;
 bail:
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index bf3e20cd029..4c85224aeaa 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -219,7 +219,7 @@ static int eth_link_query_port(struct ib_device *ibdev, u8 port,
 	struct net_device *ndev;
 	enum ib_mtu tmp;
 
-	props->active_width	= IB_WIDTH_4X;
+	props->active_width	= IB_WIDTH_1X;
 	props->active_speed	= 4;
 	props->port_cap_flags	= IB_PORT_CM_SUP;
 	props->gid_tbl_len	= to_mdev(ibdev)->dev->caps.gid_table_len[port];
@@ -242,7 +242,7 @@ static int eth_link_query_port(struct ib_device *ibdev, u8 port,
 	tmp = iboe_get_mtu(ndev->mtu);
 	props->active_mtu = tmp ? min(props->max_mtu, tmp) : IB_MTU_256;
 
-	props->state		= netif_running(ndev) &&  netif_oper_up(ndev) ?
+	props->state		= (netif_running(ndev) && netif_carrier_ok(ndev)) ?
 					IB_PORT_ACTIVE : IB_PORT_DOWN;
 	props->phys_state	= state_to_phys_state(props->state);
 
@@ -848,8 +848,8 @@ static int update_ipv6_gids(struct mlx4_ib_dev *dev, int port, int clear)
 		goto out;
 	}
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, tmp) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, tmp) {
 		if (ndev && (tmp == ndev || rdma_vlan_dev_real_dev(tmp) == ndev)) {
 			gid.global.subnet_prefix = cpu_to_be64(0xfe80000000000000LL);
 			vid = rdma_vlan_dev_vlan_id(tmp);
@@ -884,7 +884,7 @@ static int update_ipv6_gids(struct mlx4_ib_dev *dev, int port, int clear)
 			}
 		}
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	for (i = 0; i < 128; ++i)
 		if (!hits[i]) {
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 9a7794ac34c..2001f20a436 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1816,6 +1816,11 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
 				    MLX4_WQE_CTRL_FENCE : 0) | size;
 
+		if (be16_to_cpu(vlan) < 0x1000) {
+			ctrl->ins_vlan = 1 << 6;
+			ctrl->vlan_tag = vlan;
+		}
+
 		/*
 		 * Make sure descriptor is fully written before
 		 * setting ownership bit (because HW can start
@@ -1831,11 +1836,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
 			(ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh;
 
-		if (be16_to_cpu(vlan) < 0x1000) {
-			ctrl->ins_vlan = 1 << 6;
-			ctrl->vlan_tag = vlan;
-		}
-
 		stamp = ind + qp->sq_spare_wqes;
 		ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);
 
diff --git a/drivers/infiniband/hw/qib/qib_fs.c b/drivers/infiniband/hw/qib/qib_fs.c
index f99bddc0171..df7fa251dcd 100644
--- a/drivers/infiniband/hw/qib/qib_fs.c
+++ b/drivers/infiniband/hw/qib/qib_fs.c
@@ -453,17 +453,14 @@ static int remove_file(struct dentry *parent, char *name)
 		goto bail;
 	}
 
-	spin_lock(&dcache_lock);
 	spin_lock(&tmp->d_lock);
 	if (!(d_unhashed(tmp) && tmp->d_inode)) {
-		dget_locked(tmp);
+		dget_dlock(tmp);
 		__d_drop(tmp);
 		spin_unlock(&tmp->d_lock);
-		spin_unlock(&dcache_lock);
 		simple_unlink(parent->d_inode, tmp);
 	} else {
 		spin_unlock(&tmp->d_lock);
-		spin_unlock(&dcache_lock);
 	}
 
 	ret = 0;
diff --git a/drivers/infiniband/ulp/srp/ib_srp.c b/drivers/infiniband/ulp/srp/ib_srp.c
index cfc1d65c457..1e1e347a771 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -1123,7 +1123,7 @@ static void srp_send_completion(struct ib_cq *cq, void *target_ptr)
 	}
 }
 
-static int srp_queuecommand(struct scsi_cmnd *scmnd,
+static int srp_queuecommand_lck(struct scsi_cmnd *scmnd,
 			    void (*done)(struct scsi_cmnd *))
 {
 	struct srp_target_port *target = host_to_target(scmnd->device->host);
@@ -1196,6 +1196,8 @@ err:
 	return SCSI_MLQUEUE_HOST_BUSY;
 }
 
+static DEF_SCSI_QCMD(srp_queuecommand)
+
 static int srp_alloc_iu_bufs(struct srp_target_port *target)
 {
 	int i;
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 7ad212d31f9..09614ce7496 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -5,7 +5,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_INPUT)		+= input-core.o
-input-core-objs := input.o input-compat.o ff-core.o
+input-core-y := input.o input-compat.o input-mt.o ff-core.o
 
 obj-$(CONFIG_INPUT_FF_MEMLESS)	+= ff-memless.o
 obj-$(CONFIG_INPUT_POLLDEV)	+= input-polldev.o
diff --git a/drivers/input/apm-power.c b/drivers/input/apm-power.c
index 7d61a966080..e90ee3d3061 100644
--- a/drivers/input/apm-power.c
+++ b/drivers/input/apm-power.c
@@ -9,6 +9,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/input.h>
 #include <linux/slab.h>
@@ -23,8 +25,7 @@ static void system_power_event(unsigned int keycode)
 	switch (keycode) {
 	case KEY_SUSPEND:
 		apm_queue_event(APM_USER_SUSPEND);
-
-		printk(KERN_INFO "apm-power: Requesting system suspend...\n");
+		pr_info("Requesting system suspend...\n");
 		break;
 	default:
 		break;
@@ -65,18 +66,15 @@ static int apmpower_connect(struct input_handler *handler,
 
 	error = input_register_handle(handle);
 	if (error) {
-		printk(KERN_ERR
-			"apm-power: Failed to register input power handler, "
-			"error %d\n", error);
+		pr_err("Failed to register input power handler, error %d\n",
+		       error);
 		kfree(handle);
 		return error;
 	}
 
 	error = input_open_device(handle);
 	if (error) {
-		printk(KERN_ERR
-			"apm-power: Failed to open input power device, "
-			"error %d\n", error);
+		pr_err("Failed to open input power device, error %d\n", error);
 		input_unregister_handle(handle);
 		kfree(handle);
 		return error;
diff --git a/drivers/input/evbug.c b/drivers/input/evbug.c
index f7c5c14ec12..cd4e6679d61 100644
--- a/drivers/input/evbug.c
+++ b/drivers/input/evbug.c
@@ -26,6 +26,8 @@
  * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/input.h>
@@ -38,8 +40,8 @@ MODULE_LICENSE("GPL");
 
 static void evbug_event(struct input_handle *handle, unsigned int type, unsigned int code, int value)
 {
-	printk(KERN_DEBUG "evbug.c: Event. Dev: %s, Type: %d, Code: %d, Value: %d\n",
-		dev_name(&handle->dev->dev), type, code, value);
+	printk(KERN_DEBUG pr_fmt("Event. Dev: %s, Type: %d, Code: %d, Value: %d\n"),
+	       dev_name(&handle->dev->dev), type, code, value);
 }
 
 static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
@@ -64,10 +66,10 @@ static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
 	if (error)
 		goto err_unregister_handle;
 
-	printk(KERN_DEBUG "evbug.c: Connected device: %s (%s at %s)\n",
-		dev_name(&dev->dev),
-		dev->name ?: "unknown",
-		dev->phys ?: "unknown");
+	printk(KERN_DEBUG pr_fmt("Connected device: %s (%s at %s)\n"),
+	       dev_name(&dev->dev),
+	       dev->name ?: "unknown",
+	       dev->phys ?: "unknown");
 
 	return 0;
 
@@ -80,8 +82,8 @@ static int evbug_connect(struct input_handler *handler, struct input_dev *dev,
 
 static void evbug_disconnect(struct input_handle *handle)
 {
-	printk(KERN_DEBUG "evbug.c: Disconnected device: %s\n",
-		dev_name(&handle->dev->dev));
+	printk(KERN_DEBUG pr_fmt("Disconnected device: %s\n"),
+	       dev_name(&handle->dev->dev));
 
 	input_close_device(handle);
 	input_unregister_handle(handle);
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index e3f7fc6f956..c8471a2552e 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -8,6 +8,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define EVDEV_MINOR_BASE	64
 #define EVDEV_MINORS		32
 #define EVDEV_MIN_BUFFER_SIZE	64U
@@ -522,88 +524,84 @@ static int handle_eviocgbit(struct input_dev *dev,
 	if (type == EV_KEY && size == OLD_KEY_MAX) {
 		len = OLD_KEY_MAX;
 		if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
-			printk(KERN_WARNING
-				"evdev.c(EVIOCGBIT): Suspicious buffer size %u, "
-				"limiting output to %zu bytes. See "
-				"http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
-				OLD_KEY_MAX,
-				BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
+			pr_warning("(EVIOCGBIT): Suspicious buffer size %u, "
+				   "limiting output to %zu bytes. See "
+				   "http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
+				   OLD_KEY_MAX,
+				   BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
 	}
 
 	return bits_to_user(bits, len, size, p, compat_mode);
 }
 #undef OLD_KEY_MAX
 
-static int evdev_handle_get_keycode(struct input_dev *dev,
-				    void __user *p, size_t size)
+static int evdev_handle_get_keycode(struct input_dev *dev, void __user *p)
 {
-	struct input_keymap_entry ke;
+	struct input_keymap_entry ke = {
+		.len	= sizeof(unsigned int),
+		.flags	= 0,
+	};
+	int __user *ip = (int __user *)p;
 	int error;
 
-	memset(&ke, 0, sizeof(ke));
+	/* legacy case */
+	if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+		return -EFAULT;
 
-	if (size == sizeof(unsigned int[2])) {
-		/* legacy case */
-		int __user *ip = (int __user *)p;
-
-		if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
-			return -EFAULT;
+	error = input_get_keycode(dev, &ke);
+	if (error)
+		return error;
 
-		ke.len = sizeof(unsigned int);
-		ke.flags = 0;
+	if (put_user(ke.keycode, ip + 1))
+		return -EFAULT;
 
-		error = input_get_keycode(dev, &ke);
-		if (error)
-			return error;
+	return 0;
+}
 
-		if (put_user(ke.keycode, ip + 1))
-			return -EFAULT;
+static int evdev_handle_get_keycode_v2(struct input_dev *dev, void __user *p)
+{
+	struct input_keymap_entry ke;
+	int error;
 
-	} else {
-		size = min(size, sizeof(ke));
+	if (copy_from_user(&ke, p, sizeof(ke)))
+		return -EFAULT;
 
-		if (copy_from_user(&ke, p, size))
-			return -EFAULT;
+	error = input_get_keycode(dev, &ke);
+	if (error)
+		return error;
 
-		error = input_get_keycode(dev, &ke);
-		if (error)
-			return error;
+	if (copy_to_user(p, &ke, sizeof(ke)))
+		return -EFAULT;
 
-		if (copy_to_user(p, &ke, size))
-			return -EFAULT;
-	}
 	return 0;
 }
 
-static int evdev_handle_set_keycode(struct input_dev *dev,
-				    void __user *p, size_t size)
+static int evdev_handle_set_keycode(struct input_dev *dev, void __user *p)
 {
-	struct input_keymap_entry ke;
-
-	memset(&ke, 0, sizeof(ke));
+	struct input_keymap_entry ke = {
+		.len	= sizeof(unsigned int),
+		.flags	= 0,
+	};
+	int __user *ip = (int __user *)p;
 
-	if (size == sizeof(unsigned int[2])) {
-		/* legacy case */
-		int __user *ip = (int __user *)p;
+	if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+		return -EFAULT;
 
-		if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
-			return -EFAULT;
-
-		if (get_user(ke.keycode, ip + 1))
-			return -EFAULT;
+	if (get_user(ke.keycode, ip + 1))
+		return -EFAULT;
 
-		ke.len = sizeof(unsigned int);
-		ke.flags = 0;
+	return input_set_keycode(dev, &ke);
+}
 
-	} else {
-		size = min(size, sizeof(ke));
+static int evdev_handle_set_keycode_v2(struct input_dev *dev, void __user *p)
+{
+	struct input_keymap_entry ke;
 
-		if (copy_from_user(&ke, p, size))
-			return -EFAULT;
+	if (copy_from_user(&ke, p, sizeof(ke)))
+		return -EFAULT;
 
-		if (ke.len > sizeof(ke.scancode))
-			return -EINVAL;
-	}
+	if (ke.len > sizeof(ke.scancode))
+		return -EINVAL;
 
 	return input_set_keycode(dev, &ke);
 }
@@ -669,6 +667,18 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 			return evdev_grab(evdev, client);
 		else
 			return evdev_ungrab(evdev, client);
+
+	case EVIOCGKEYCODE:
+		return evdev_handle_get_keycode(dev, p);
+
+	case EVIOCSKEYCODE:
+		return evdev_handle_set_keycode(dev, p);
+
+	case EVIOCGKEYCODE_V2:
+		return evdev_handle_get_keycode_v2(dev, p);
+
+	case EVIOCSKEYCODE_V2:
+		return evdev_handle_set_keycode_v2(dev, p);
 	}
 
 	size = _IOC_SIZE(cmd);
@@ -677,6 +687,10 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 #define EVIOC_MASK_SIZE(nr)	((nr) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT))
 	switch (EVIOC_MASK_SIZE(cmd)) {
 
+	case EVIOCGPROP(0):
+		return bits_to_user(dev->propbit, INPUT_PROP_MAX,
+				    size, p, compat_mode);
+
 	case EVIOCGKEY(0):
 		return bits_to_user(dev->key, KEY_MAX, size, p, compat_mode);
 
@@ -708,12 +722,6 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 			return -EFAULT;
 
 		return error;
-
-	case EVIOC_MASK_SIZE(EVIOCGKEYCODE):
-		return evdev_handle_get_keycode(dev, p, size);
-
-	case EVIOC_MASK_SIZE(EVIOCSKEYCODE):
-		return evdev_handle_set_keycode(dev, p, size);
 	}
 
 	/* Multi-number variable-length handlers */
@@ -894,7 +902,7 @@ static int evdev_connect(struct input_handler *handler, struct input_dev *dev,
 			break;
 
 	if (minor == EVDEV_MINORS) {
-		printk(KERN_ERR "evdev: no more free evdev devices\n");
+		pr_err("no more free evdev devices\n");
 		return -ENFILE;
 	}
 
diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c
index 03078c08309..3367f760d75 100644
--- a/drivers/input/ff-core.c
+++ b/drivers/input/ff-core.c
@@ -23,7 +23,7 @@
 
 /* #define DEBUG */
 
-#define debug(format, arg...) pr_debug("ff-core: " format "\n", ## arg)
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
 
 #include <linux/input.h>
 #include <linux/module.h>
@@ -116,7 +116,7 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect,
 
 	if (effect->type < FF_EFFECT_MIN || effect->type > FF_EFFECT_MAX ||
 	    !test_bit(effect->type, dev->ffbit)) {
-		debug("invalid or not supported effect type in upload");
+		pr_debug("invalid or not supported effect type in upload\n");
 		return -EINVAL;
 	}
 
@@ -124,7 +124,7 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect,
 	    (effect->u.periodic.waveform < FF_WAVEFORM_MIN ||
 	     effect->u.periodic.waveform > FF_WAVEFORM_MAX ||
 	     !test_bit(effect->u.periodic.waveform, dev->ffbit))) {
-		debug("invalid or not supported wave form in upload");
+		pr_debug("invalid or not supported wave form in upload\n");
 		return -EINVAL;
 	}
 
@@ -246,7 +246,7 @@ static int flush_effects(struct input_dev *dev, struct file *file)
 	struct ff_device *ff = dev->ff;
 	int i;
 
-	debug("flushing now");
+	pr_debug("flushing now\n");
 
 	mutex_lock(&ff->mutex);
 
@@ -315,8 +315,7 @@ int input_ff_create(struct input_dev *dev, int max_effects)
 	int i;
 
 	if (!max_effects) {
-		printk(KERN_ERR
-		       "ff-core: cannot allocate device without any effects\n");
+		pr_err("cannot allocate device without any effects\n");
 		return -EINVAL;
 	}
 
diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index 1d881c96ba8..117a59aaa70 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -23,7 +23,7 @@
 
 /* #define DEBUG */
 
-#define debug(format, arg...) pr_debug("ff-memless: " format "\n", ## arg)
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/slab.h>
 #include <linux/input.h>
@@ -129,7 +129,7 @@ static void ml_schedule_timer(struct ml_device *ml)
 	int events = 0;
 	int i;
 
-	debug("calculating next timer");
+	pr_debug("calculating next timer\n");
 
 	for (i = 0; i < FF_MEMLESS_EFFECTS; i++) {
 
@@ -149,10 +149,10 @@ static void ml_schedule_timer(struct ml_device *ml)
 	}
 
 	if (!events) {
-		debug("no actions");
+		pr_debug("no actions\n");
 		del_timer(&ml->timer);
 	} else {
-		debug("timer set");
+		pr_debug("timer set\n");
 		mod_timer(&ml->timer, earliest);
 	}
 }
@@ -173,8 +173,8 @@ static int apply_envelope(struct ml_effect_state *state, int value,
 	if (envelope->attack_length &&
 	    time_before(now,
 			state->play_at + msecs_to_jiffies(envelope->attack_length))) {
-		debug("value = 0x%x, attack_level = 0x%x", value,
-		      envelope->attack_level);
+		pr_debug("value = 0x%x, attack_level = 0x%x\n",
+			 value, envelope->attack_level);
 		time_from_level = jiffies_to_msecs(now - state->play_at);
 		time_of_envelope = envelope->attack_length;
 		envelope_level = min_t(__s16, envelope->attack_level, 0x7fff);
@@ -191,13 +191,13 @@ static int apply_envelope(struct ml_effect_state *state, int value,
 
 	difference = abs(value) - envelope_level;
 
-	debug("difference = %d", difference);
-	debug("time_from_level = 0x%x", time_from_level);
-	debug("time_of_envelope = 0x%x", time_of_envelope);
+	pr_debug("difference = %d\n", difference);
+	pr_debug("time_from_level = 0x%x\n", time_from_level);
+	pr_debug("time_of_envelope = 0x%x\n", time_of_envelope);
 
 	difference = difference * time_from_level / time_of_envelope;
 
-	debug("difference = %d", difference);
+	pr_debug("difference = %d\n", difference);
 
 	return value < 0 ?
 		-(difference + envelope_level) : (difference + envelope_level);
@@ -215,8 +215,7 @@ static int get_compatible_type(struct ff_device *ff, int effect_type)
 	if (effect_type == FF_PERIODIC && test_bit(FF_RUMBLE, ff->ffbit))
 		return FF_RUMBLE;
 
-	printk(KERN_ERR
-	       "ff-memless: invalid type in get_compatible_type()\n");
+	pr_err("invalid type in get_compatible_type()\n");
 
 	return 0;
 }
@@ -312,7 +311,7 @@ static void ml_combine_effects(struct ff_effect *effect,
 		break;
 
 	default:
-		printk(KERN_ERR "ff-memless: invalid type in ml_combine_effects()\n");
+		pr_err("invalid type in ml_combine_effects()\n");
 		break;
 	}
 
@@ -406,7 +405,7 @@ static void ml_effect_timer(unsigned long timer_data)
 	struct ml_device *ml = dev->ff->private;
 	unsigned long flags;
 
-	debug("timer: updating effects");
+	pr_debug("timer: updating effects\n");
 
 	spin_lock_irqsave(&dev->event_lock, flags);
 	ml_play_effects(ml);
@@ -438,7 +437,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
 	struct ml_effect_state *state = &ml->states[effect_id];
 
 	if (value > 0) {
-		debug("initiated play");
+		pr_debug("initiated play\n");
 
 		__set_bit(FF_EFFECT_STARTED, &state->flags);
 		state->count = value;
@@ -449,7 +448,7 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value)
 		state->adj_at = state->play_at;
 
 	} else {
-		debug("initiated stop");
+		pr_debug("initiated stop\n");
 
 		if (test_bit(FF_EFFECT_PLAYING, &state->flags))
 			__set_bit(FF_EFFECT_ABORTING, &state->flags);
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index 46239e47a26..23cf8fc933e 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -18,13 +18,11 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/gameport.h>
-#include <linux/wait.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-#include <linux/kthread.h>
+#include <linux/workqueue.h>
 #include <linux/sched.h>	/* HZ */
 #include <linux/mutex.h>
-#include <linux/freezer.h>
 
 /*#include <asm/io.h>*/
 
@@ -123,7 +121,7 @@ static int gameport_measure_speed(struct gameport *gameport)
 	}
 
 	gameport_close(gameport);
-	return (cpu_data(raw_smp_processor_id()).loops_per_jiffy *
+	return (this_cpu_read(cpu_info.loops_per_jiffy) *
 		(unsigned long)HZ / (1000 / 50)) / (tx < 1 ? 1 : tx);
 
 #else
@@ -234,58 +232,22 @@ struct gameport_event {
 
 static DEFINE_SPINLOCK(gameport_event_lock);	/* protects gameport_event_list */
 static LIST_HEAD(gameport_event_list);
-static DECLARE_WAIT_QUEUE_HEAD(gameport_wait);
-static struct task_struct *gameport_task;
 
-static int gameport_queue_event(void *object, struct module *owner,
-				enum gameport_event_type event_type)
+static struct gameport_event *gameport_get_event(void)
 {
+	struct gameport_event *event = NULL;
 	unsigned long flags;
-	struct gameport_event *event;
-	int retval = 0;
 
 	spin_lock_irqsave(&gameport_event_lock, flags);
 
-	/*
-	 * Scan event list for the other events for the same gameport port,
-	 * starting with the most recent one. If event is the same we
-	 * do not need add new one. If event is of different type we
-	 * need to add this event and should not look further because
-	 * we need to preseve sequence of distinct events.
-	 */
-	list_for_each_entry_reverse(event, &gameport_event_list, node) {
-		if (event->object == object) {
-			if (event->type == event_type)
-				goto out;
-			break;
-		}
-	}
-
-	event = kmalloc(sizeof(struct gameport_event), GFP_ATOMIC);
-	if (!event) {
-		pr_err("Not enough memory to queue event %d\n", event_type);
-		retval = -ENOMEM;
-		goto out;
-	}
-
-	if (!try_module_get(owner)) {
-		pr_warning("Can't get module reference, dropping event %d\n",
-			   event_type);
-		kfree(event);
-		retval = -EINVAL;
-		goto out;
+	if (!list_empty(&gameport_event_list)) {
+		event = list_first_entry(&gameport_event_list,
+					 struct gameport_event, node);
+		list_del_init(&event->node);
 	}
 
-	event->type = event_type;
-	event->object = object;
-	event->owner = owner;
-
-	list_add_tail(&event->node, &gameport_event_list);
-	wake_up(&gameport_wait);
-
-out:
 	spin_unlock_irqrestore(&gameport_event_lock, flags);
-	return retval;
+	return event;
 }
 
 static void gameport_free_event(struct gameport_event *event)
@@ -319,24 +281,8 @@ static void gameport_remove_duplicate_events(struct gameport_event *event)
 	spin_unlock_irqrestore(&gameport_event_lock, flags);
 }
 
-static struct gameport_event *gameport_get_event(void)
-{
-	struct gameport_event *event = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&gameport_event_lock, flags);
-
-	if (!list_empty(&gameport_event_list)) {
-		event = list_first_entry(&gameport_event_list,
-					 struct gameport_event, node);
-		list_del_init(&event->node);
-	}
-
-	spin_unlock_irqrestore(&gameport_event_lock, flags);
-	return event;
-}
 
-static void gameport_handle_event(void)
+static void gameport_handle_events(struct work_struct *work)
 {
 	struct gameport_event *event;
 
@@ -368,6 +314,59 @@ static void gameport_handle_event(void)
 	mutex_unlock(&gameport_mutex);
 }
 
+static DECLARE_WORK(gameport_event_work, gameport_handle_events);
+
+static int gameport_queue_event(void *object, struct module *owner,
+				enum gameport_event_type event_type)
+{
+	unsigned long flags;
+	struct gameport_event *event;
+	int retval = 0;
+
+	spin_lock_irqsave(&gameport_event_lock, flags);
+
+	/*
+	 * Scan event list for the other events for the same gameport port,
+	 * starting with the most recent one. If event is the same we
+	 * do not need add new one. If event is of different type we
+	 * need to add this event and should not look further because
+	 * we need to preserve sequence of distinct events.
+	 */
+	list_for_each_entry_reverse(event, &gameport_event_list, node) {
+		if (event->object == object) {
+			if (event->type == event_type)
+				goto out;
+			break;
+		}
+	}
+
+	event = kmalloc(sizeof(struct gameport_event), GFP_ATOMIC);
+	if (!event) {
+		pr_err("Not enough memory to queue event %d\n", event_type);
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	if (!try_module_get(owner)) {
+		pr_warning("Can't get module reference, dropping event %d\n",
+			   event_type);
+		kfree(event);
+		retval = -EINVAL;
+		goto out;
+	}
+
+	event->type = event_type;
+	event->object = object;
+	event->owner = owner;
+
+	list_add_tail(&event->node, &gameport_event_list);
+	schedule_work(&gameport_event_work);
+
+out:
+	spin_unlock_irqrestore(&gameport_event_lock, flags);
+	return retval;
+}
+
 /*
  * Remove all events that have been submitted for a given object,
  * be it a gameport port or a driver.
@@ -419,19 +418,6 @@ static struct gameport *gameport_get_pending_child(struct gameport *parent)
 	return child;
 }
 
-static int gameport_thread(void *nothing)
-{
-	set_freezable();
-	do {
-		gameport_handle_event();
-		wait_event_freezable(gameport_wait,
-			kthread_should_stop() || !list_empty(&gameport_event_list));
-	} while (!kthread_should_stop());
-
-	return 0;
-}
-
-
 /*
  * Gameport port operations
  */
@@ -814,13 +800,6 @@ static int __init gameport_init(void)
 		return error;
 	}
 
-	gameport_task = kthread_run(gameport_thread, NULL, "kgameportd");
-	if (IS_ERR(gameport_task)) {
-		bus_unregister(&gameport_bus);
-		error = PTR_ERR(gameport_task);
-		pr_err("Failed to start kgameportd, error: %d\n", error);
-		return error;
-	}
 
 	return 0;
 }
@@ -828,7 +807,12 @@ static int __init gameport_init(void)
 static void __exit gameport_exit(void)
 {
 	bus_unregister(&gameport_bus);
-	kthread_stop(gameport_task);
+
+	/*
+	 * There should not be any outstanding events but work may
+	 * still be scheduled so simply cancel it.
+	 */
+	cancel_work_sync(&gameport_event_work);
 }
 
 subsys_initcall(gameport_init);
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
new file mode 100644
index 00000000000..c48c81f0308
--- /dev/null
+++ b/drivers/input/input-mt.c
@@ -0,0 +1,170 @@
+/*
+ * Input Multitouch Library
+ *
+ * Copyright (c) 2008-2010 Henrik Rydberg
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/input/mt.h>
+#include <linux/slab.h>
+
+#define TRKID_SGN	((TRKID_MAX + 1) >> 1)
+
+/**
+ * input_mt_init_slots() - initialize MT input slots
+ * @dev: input device supporting MT events and finger tracking
+ * @num_slots: number of slots used by the device
+ *
+ * This function allocates all necessary memory for MT slot handling
+ * in the input device, prepares the ABS_MT_SLOT and
+ * ABS_MT_TRACKING_ID events for use and sets up appropriate buffers.
+ * May be called repeatedly. Returns -EINVAL if attempting to
+ * reinitialize with a different number of slots.
+ */
+int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots)
+{
+	int i;
+
+	if (!num_slots)
+		return 0;
+	if (dev->mt)
+		return dev->mtsize != num_slots ? -EINVAL : 0;
+
+	dev->mt = kcalloc(num_slots, sizeof(struct input_mt_slot), GFP_KERNEL);
+	if (!dev->mt)
+		return -ENOMEM;
+
+	dev->mtsize = num_slots;
+	input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0);
+	input_set_abs_params(dev, ABS_MT_TRACKING_ID, 0, TRKID_MAX, 0, 0);
+	input_set_events_per_packet(dev, 6 * num_slots);
+
+	/* Mark slots as 'unused' */
+	for (i = 0; i < num_slots; i++)
+		input_mt_set_value(&dev->mt[i], ABS_MT_TRACKING_ID, -1);
+
+	return 0;
+}
+EXPORT_SYMBOL(input_mt_init_slots);
+
+/**
+ * input_mt_destroy_slots() - frees the MT slots of the input device
+ * @dev: input device with allocated MT slots
+ *
+ * This function is only needed in error path as the input core will
+ * automatically free the MT slots when the device is destroyed.
+ */
+void input_mt_destroy_slots(struct input_dev *dev)
+{
+	kfree(dev->mt);
+	dev->mt = NULL;
+	dev->mtsize = 0;
+	dev->slot = 0;
+	dev->trkid = 0;
+}
+EXPORT_SYMBOL(input_mt_destroy_slots);
+
+/**
+ * input_mt_report_slot_state() - report contact state
+ * @dev: input device with allocated MT slots
+ * @tool_type: the tool type to use in this slot
+ * @active: true if contact is active, false otherwise
+ *
+ * Reports a contact via ABS_MT_TRACKING_ID, and optionally
+ * ABS_MT_TOOL_TYPE. If active is true and the slot is currently
+ * inactive, or if the tool type is changed, a new tracking id is
+ * assigned to the slot. The tool type is only reported if the
+ * corresponding absbit field is set.
+ */
+void input_mt_report_slot_state(struct input_dev *dev,
+				unsigned int tool_type, bool active)
+{
+	struct input_mt_slot *mt;
+	int id;
+
+	if (!dev->mt || !active) {
+		input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);
+		return;
+	}
+
+	mt = &dev->mt[dev->slot];
+	id = input_mt_get_value(mt, ABS_MT_TRACKING_ID);
+	if (id < 0 || input_mt_get_value(mt, ABS_MT_TOOL_TYPE) != tool_type)
+		id = input_mt_new_trkid(dev);
+
+	input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, id);
+	input_event(dev, EV_ABS, ABS_MT_TOOL_TYPE, tool_type);
+}
+EXPORT_SYMBOL(input_mt_report_slot_state);
+
+/**
+ * input_mt_report_finger_count() - report contact count
+ * @dev: input device with allocated MT slots
+ * @count: the number of contacts
+ *
+ * Reports the contact count via BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP,
+ * BTN_TOOL_TRIPLETAP and BTN_TOOL_QUADTAP.
+ *
+ * The input core ensures only the KEY events already setup for
+ * this device will produce output.
+ */
+void input_mt_report_finger_count(struct input_dev *dev, int count)
+{
+	input_event(dev, EV_KEY, BTN_TOOL_FINGER, count == 1);
+	input_event(dev, EV_KEY, BTN_TOOL_DOUBLETAP, count == 2);
+	input_event(dev, EV_KEY, BTN_TOOL_TRIPLETAP, count == 3);
+	input_event(dev, EV_KEY, BTN_TOOL_QUADTAP, count == 4);
+}
+EXPORT_SYMBOL(input_mt_report_finger_count);
+
+/**
+ * input_mt_report_pointer_emulation() - common pointer emulation
+ * @dev: input device with allocated MT slots
+ * @use_count: report number of active contacts as finger count
+ *
+ * Performs legacy pointer emulation via BTN_TOUCH, ABS_X, ABS_Y and
+ * ABS_PRESSURE. Touchpad finger count is emulated if use_count is true.
+ *
+ * The input core ensures only the KEY and ABS axes already setup for
+ * this device will produce output.
+ */
+void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count)
+{
+	struct input_mt_slot *oldest = 0;
+	int oldid = dev->trkid;
+	int count = 0;
+	int i;
+
+	for (i = 0; i < dev->mtsize; ++i) {
+		struct input_mt_slot *ps = &dev->mt[i];
+		int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID);
+
+		if (id < 0)
+			continue;
+		if ((id - oldid) & TRKID_SGN) {
+			oldest = ps;
+			oldid = id;
+		}
+		count++;
+	}
+
+	input_event(dev, EV_KEY, BTN_TOUCH, count > 0);
+	if (use_count)
+		input_mt_report_finger_count(dev, count);
+
+	if (oldest) {
+		int x = input_mt_get_value(oldest, ABS_MT_POSITION_X);
+		int y = input_mt_get_value(oldest, ABS_MT_POSITION_Y);
+		int p = input_mt_get_value(oldest, ABS_MT_PRESSURE);
+
+		input_event(dev, EV_ABS, ABS_X, x);
+		input_event(dev, EV_ABS, ABS_Y, y);
+		input_event(dev, EV_ABS, ABS_PRESSURE, p);
+	} else {
+		input_event(dev, EV_ABS, ABS_PRESSURE, 0);
+	}
+}
+EXPORT_SYMBOL(input_mt_report_pointer_emulation);
diff --git a/drivers/input/input-polldev.c b/drivers/input/input-polldev.c
index 10c9b0a845f..0559e309bac 100644
--- a/drivers/input/input-polldev.c
+++ b/drivers/input/input-polldev.c
@@ -8,6 +8,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/jiffies.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
@@ -33,8 +35,7 @@ static int input_polldev_start_workqueue(void)
 	if (!polldev_users) {
 		polldev_wq = create_singlethread_workqueue("ipolldevd");
 		if (!polldev_wq) {
-			printk(KERN_ERR "input-polldev: failed to create "
-				"ipolldevd workqueue\n");
+			pr_err("failed to create ipolldevd workqueue\n");
 			retval = -ENOMEM;
 			goto out;
 		}
diff --git a/drivers/input/input.c b/drivers/input/input.c
index d092ef9291d..7985114beac 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -10,9 +10,11 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_BASENAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/types.h>
-#include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/random.h>
@@ -24,7 +26,6 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/rcupdate.h>
-#include <linux/smp_lock.h>
 #include "input-compat.h"
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>");
@@ -74,6 +75,7 @@ static int input_defuzz_abs_event(int value, int old_val, int fuzz)
  * dev->event_lock held and interrupts disabled.
  */
 static void input_pass_event(struct input_dev *dev,
+			     struct input_handler *src_handler,
 			     unsigned int type, unsigned int code, int value)
 {
 	struct input_handler *handler;
@@ -92,6 +94,15 @@ static void input_pass_event(struct input_dev *dev,
 				continue;
 
 			handler = handle->handler;
+
+			/*
+			 * If this is the handler that injected this
+			 * particular event we want to skip it to avoid
+			 * filters firing again and again.
+			 */
+			if (handler == src_handler)
+				continue;
+
 			if (!handler->filter) {
 				if (filtered)
 					break;
@@ -121,7 +132,7 @@ static void input_repeat_key(unsigned long data)
 	if (test_bit(dev->repeat_key, dev->key) &&
 	    is_event_supported(dev->repeat_key, dev->keybit, KEY_MAX)) {
 
-		input_pass_event(dev, EV_KEY, dev->repeat_key, 2);
+		input_pass_event(dev, NULL, EV_KEY, dev->repeat_key, 2);
 
 		if (dev->sync) {
 			/*
@@ -130,7 +141,7 @@ static void input_repeat_key(unsigned long data)
 			 * Otherwise assume that the driver will send
 			 * SYN_REPORT once it's done.
 			 */
-			input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+			input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
 		}
 
 		if (dev->rep[REP_PERIOD])
@@ -163,6 +174,7 @@ static void input_stop_autorepeat(struct input_dev *dev)
 #define INPUT_PASS_TO_ALL	(INPUT_PASS_TO_HANDLERS | INPUT_PASS_TO_DEVICE)
 
 static int input_handle_abs_event(struct input_dev *dev,
+				  struct input_handler *src_handler,
 				  unsigned int code, int *pval)
 {
 	bool is_mt_event;
@@ -206,13 +218,15 @@ static int input_handle_abs_event(struct input_dev *dev,
 	/* Flush pending "slot" event */
 	if (is_mt_event && dev->slot != input_abs_get_val(dev, ABS_MT_SLOT)) {
 		input_abs_set_val(dev, ABS_MT_SLOT, dev->slot);
-		input_pass_event(dev, EV_ABS, ABS_MT_SLOT, dev->slot);
+		input_pass_event(dev, src_handler,
+				 EV_ABS, ABS_MT_SLOT, dev->slot);
 	}
 
 	return INPUT_PASS_TO_HANDLERS;
 }
 
 static void input_handle_event(struct input_dev *dev,
+			       struct input_handler *src_handler,
 			       unsigned int type, unsigned int code, int value)
 {
 	int disposition = INPUT_IGNORE_EVENT;
@@ -265,7 +279,8 @@ static void input_handle_event(struct input_dev *dev,
 
 	case EV_ABS:
 		if (is_event_supported(code, dev->absbit, ABS_MAX))
-			disposition = input_handle_abs_event(dev, code, &value);
+			disposition = input_handle_abs_event(dev, src_handler,
+							     code, &value);
 
 		break;
 
@@ -323,7 +338,7 @@ static void input_handle_event(struct input_dev *dev,
 		dev->event(dev, type, code, value);
 
 	if (disposition & INPUT_PASS_TO_HANDLERS)
-		input_pass_event(dev, type, code, value);
+		input_pass_event(dev, src_handler, type, code, value);
 }
 
 /**
@@ -352,7 +367,7 @@ void input_event(struct input_dev *dev,
 
 		spin_lock_irqsave(&dev->event_lock, flags);
 		add_input_randomness(type, code, value);
-		input_handle_event(dev, type, code, value);
+		input_handle_event(dev, NULL, type, code, value);
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 	}
 }
@@ -382,7 +397,8 @@ void input_inject_event(struct input_handle *handle,
 		rcu_read_lock();
 		grab = rcu_dereference(dev->grab);
 		if (!grab || grab == handle)
-			input_handle_event(dev, type, code, value);
+			input_handle_event(dev, handle->handler,
+					   type, code, value);
 		rcu_read_unlock();
 
 		spin_unlock_irqrestore(&dev->event_lock, flags);
@@ -595,10 +611,10 @@ static void input_dev_release_keys(struct input_dev *dev)
 		for (code = 0; code <= KEY_MAX; code++) {
 			if (is_event_supported(code, dev->keybit, KEY_MAX) &&
 			    __test_and_clear_bit(code, dev->key)) {
-				input_pass_event(dev, EV_KEY, code, 0);
+				input_pass_event(dev, NULL, EV_KEY, code, 0);
 			}
 		}
-		input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+		input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
 	}
 }
 
@@ -738,7 +754,7 @@ static int input_default_setkeycode(struct input_dev *dev,
 	if (index >= dev->keycodemax)
 		return -EINVAL;
 
-	if (dev->keycodesize < sizeof(dev->keycode) &&
+	if (dev->keycodesize < sizeof(ke->keycode) &&
 			(ke->keycode >> (dev->keycodesize * 8)))
 		return -EINVAL;
 
@@ -873,9 +889,9 @@ int input_set_keycode(struct input_dev *dev,
 	    !is_event_supported(old_keycode, dev->keybit, KEY_MAX) &&
 	    __test_and_clear_bit(old_keycode, dev->key)) {
 
-		input_pass_event(dev, EV_KEY, old_keycode, 0);
+		input_pass_event(dev, NULL, EV_KEY, old_keycode, 0);
 		if (dev->sync)
-			input_pass_event(dev, EV_SYN, SYN_REPORT, 1);
+			input_pass_event(dev, NULL, EV_SYN, SYN_REPORT, 1);
 	}
 
  out:
@@ -944,10 +960,8 @@ static int input_attach_handler(struct input_dev *dev, struct input_handler *han
 
 	error = handler->connect(handler, dev, id);
 	if (error && error != -ENODEV)
-		printk(KERN_ERR
-			"input: failed to attach handler %s to device %s, "
-			"error: %d\n",
-			handler->name, kobject_name(&dev->dev.kobj), error);
+		pr_err("failed to attach handler %s to device %s, error: %d\n",
+		       handler->name, kobject_name(&dev->dev.kobj), error);
 
 	return error;
 }
@@ -1095,6 +1109,8 @@ static int input_devices_seq_show(struct seq_file *seq, void *v)
 		seq_printf(seq, "%s ", handle->name);
 	seq_putc(seq, '\n');
 
+	input_seq_print_bitmap(seq, "PROP", dev->propbit, INPUT_PROP_MAX);
+
 	input_seq_print_bitmap(seq, "EV", dev->evbit, EV_MAX);
 	if (test_bit(EV_KEY, dev->evbit))
 		input_seq_print_bitmap(seq, "KEY", dev->keybit, KEY_MAX);
@@ -1318,11 +1334,26 @@ static ssize_t input_dev_show_modalias(struct device *dev,
 }
 static DEVICE_ATTR(modalias, S_IRUGO, input_dev_show_modalias, NULL);
 
+static int input_print_bitmap(char *buf, int buf_size, unsigned long *bitmap,
+			      int max, int add_cr);
+
+static ssize_t input_dev_show_properties(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct input_dev *input_dev = to_input_dev(dev);
+	int len = input_print_bitmap(buf, PAGE_SIZE, input_dev->propbit,
+				     INPUT_PROP_MAX, true);
+	return min_t(int, len, PAGE_SIZE);
+}
+static DEVICE_ATTR(properties, S_IRUGO, input_dev_show_properties, NULL);
+
 static struct attribute *input_dev_attrs[] = {
 	&dev_attr_name.attr,
 	&dev_attr_phys.attr,
 	&dev_attr_uniq.attr,
 	&dev_attr_modalias.attr,
+	&dev_attr_properties.attr,
 	NULL
 };
 
@@ -1456,7 +1487,7 @@ static int input_add_uevent_bm_var(struct kobj_uevent_env *env,
 {
 	int len;
 
-	if (add_uevent_var(env, "%s=", name))
+	if (add_uevent_var(env, "%s", name))
 		return -ENOMEM;
 
 	len = input_print_bitmap(&env->buf[env->buflen - 1],
@@ -1522,6 +1553,8 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 	if (dev->uniq)
 		INPUT_ADD_HOTPLUG_VAR("UNIQ=\"%s\"", dev->uniq);
 
+	INPUT_ADD_HOTPLUG_BM_VAR("PROP=", dev->propbit, INPUT_PROP_MAX);
+
 	INPUT_ADD_HOTPLUG_BM_VAR("EV=", dev->evbit, EV_MAX);
 	if (test_bit(EV_KEY, dev->evbit))
 		INPUT_ADD_HOTPLUG_BM_VAR("KEY=", dev->keybit, KEY_MAX);
@@ -1565,8 +1598,7 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 		}							\
 	} while (0)
 
-#ifdef CONFIG_PM
-static void input_dev_reset(struct input_dev *dev, bool activate)
+static void input_dev_toggle(struct input_dev *dev, bool activate)
 {
 	if (!dev->event)
 		return;
@@ -1580,12 +1612,44 @@ static void input_dev_reset(struct input_dev *dev, bool activate)
 	}
 }
 
+/**
+ * input_reset_device() - reset/restore the state of input device
+ * @dev: input device whose state needs to be reset
+ *
+ * This function tries to reset the state of an opened input device and
+ * bring internal state and state if the hardware in sync with each other.
+ * We mark all keys as released, restore LED state, repeat rate, etc.
+ */
+void input_reset_device(struct input_dev *dev)
+{
+	mutex_lock(&dev->mutex);
+
+	if (dev->users) {
+		input_dev_toggle(dev, true);
+
+		/*
+		 * Keys that have been pressed at suspend time are unlikely
+		 * to be still pressed when we resume.
+		 */
+		spin_lock_irq(&dev->event_lock);
+		input_dev_release_keys(dev);
+		spin_unlock_irq(&dev->event_lock);
+	}
+
+	mutex_unlock(&dev->mutex);
+}
+EXPORT_SYMBOL(input_reset_device);
+
+#ifdef CONFIG_PM
 static int input_dev_suspend(struct device *dev)
 {
 	struct input_dev *input_dev = to_input_dev(dev);
 
 	mutex_lock(&input_dev->mutex);
-	input_dev_reset(input_dev, false);
+
+	if (input_dev->users)
+		input_dev_toggle(input_dev, false);
+
 	mutex_unlock(&input_dev->mutex);
 
 	return 0;
@@ -1595,18 +1659,7 @@ static int input_dev_resume(struct device *dev)
 {
 	struct input_dev *input_dev = to_input_dev(dev);
 
-	mutex_lock(&input_dev->mutex);
-	input_dev_reset(input_dev, true);
-
-	/*
-	 * Keys that have been pressed at suspend time are unlikely
-	 * to be still pressed when we resume.
-	 */
-	spin_lock_irq(&input_dev->event_lock);
-	input_dev_release_keys(input_dev);
-	spin_unlock_irq(&input_dev->event_lock);
-
-	mutex_unlock(&input_dev->mutex);
+	input_reset_device(input_dev);
 
 	return 0;
 }
@@ -1691,52 +1744,6 @@ void input_free_device(struct input_dev *dev)
 EXPORT_SYMBOL(input_free_device);
 
 /**
- * input_mt_create_slots() - create MT input slots
- * @dev: input device supporting MT events and finger tracking
- * @num_slots: number of slots used by the device
- *
- * This function allocates all necessary memory for MT slot handling in the
- * input device, and adds ABS_MT_SLOT to the device capabilities. All slots
- * are initially marked as unused by setting ABS_MT_TRACKING_ID to -1.
- */
-int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots)
-{
-	int i;
-
-	if (!num_slots)
-		return 0;
-
-	dev->mt = kcalloc(num_slots, sizeof(struct input_mt_slot), GFP_KERNEL);
-	if (!dev->mt)
-		return -ENOMEM;
-
-	dev->mtsize = num_slots;
-	input_set_abs_params(dev, ABS_MT_SLOT, 0, num_slots - 1, 0, 0);
-
-	/* Mark slots as 'unused' */
-	for (i = 0; i < num_slots; i++)
-		dev->mt[i].abs[ABS_MT_TRACKING_ID - ABS_MT_FIRST] = -1;
-
-	return 0;
-}
-EXPORT_SYMBOL(input_mt_create_slots);
-
-/**
- * input_mt_destroy_slots() - frees the MT slots of the input device
- * @dev: input device with allocated MT slots
- *
- * This function is only needed in error path as the input core will
- * automatically free the MT slots when the device is destroyed.
- */
-void input_mt_destroy_slots(struct input_dev *dev)
-{
-	kfree(dev->mt);
-	dev->mt = NULL;
-	dev->mtsize = 0;
-}
-EXPORT_SYMBOL(input_mt_destroy_slots);
-
-/**
  * input_set_capability - mark device as capable of a certain event
  * @dev: device that is capable of emitting or accepting event
  * @type: type of the event (EV_KEY, EV_REL, etc...)
@@ -1785,9 +1792,8 @@ void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int
 		break;
 
 	default:
-		printk(KERN_ERR
-			"input_set_capability: unknown type %u (code %u)\n",
-			type, code);
+		pr_err("input_set_capability: unknown type %u (code %u)\n",
+		       type, code);
 		dump_stack();
 		return;
 	}
@@ -1869,8 +1875,9 @@ int input_register_device(struct input_dev *dev)
 		return error;
 
 	path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
-	printk(KERN_INFO "input: %s as %s\n",
-		dev->name ? dev->name : "Unspecified device", path ? path : "N/A");
+	pr_info("%s as %s\n",
+		dev->name ? dev->name : "Unspecified device",
+		path ? path : "N/A");
 	kfree(path);
 
 	error = mutex_lock_interruptible(&input_mutex);
@@ -2152,7 +2159,7 @@ static int __init input_init(void)
 
 	err = class_register(&input_class);
 	if (err) {
-		printk(KERN_ERR "input: unable to register input_dev class\n");
+		pr_err("unable to register input_dev class\n");
 		return err;
 	}
 
@@ -2162,7 +2169,7 @@ static int __init input_init(void)
 
 	err = register_chrdev(INPUT_MAJOR, "input", &input_fops);
 	if (err) {
-		printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR);
+		pr_err("unable to register char major %d", INPUT_MAJOR);
 		goto fail2;
 	}
 
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 9d424cebfd2..3182c9cd1b0 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -10,6 +10,8 @@
  * (at your option) any later version.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <asm/io.h>
 #include <asm/system.h>
 #include <linux/delay.h>
@@ -806,7 +808,7 @@ static int joydev_connect(struct input_handler *handler, struct input_dev *dev,
 			break;
 
 	if (minor == JOYDEV_MINORS) {
-		printk(KERN_ERR "joydev: no more free joydev devices\n");
+		pr_err("no more free joydev devices\n");
 		return -ENFILE;
 	}
 
diff --git a/drivers/input/joystick/iforce/Makefile b/drivers/input/joystick/iforce/Makefile
index 74daff49ab6..bc5bda22f15 100644
--- a/drivers/input/joystick/iforce/Makefile
+++ b/drivers/input/joystick/iforce/Makefile
@@ -4,17 +4,8 @@
 # By Johann Deneux <johann.deneux@gmail.com>
 #
 
-# Goal definition
-iforce-objs	:= iforce-ff.o iforce-main.o iforce-packets.o
-
 obj-$(CONFIG_JOYSTICK_IFORCE)	+= iforce.o
 
-ifeq ($(CONFIG_JOYSTICK_IFORCE_232),y)
-	iforce-objs += iforce-serio.o
-endif
-
-ifeq ($(CONFIG_JOYSTICK_IFORCE_USB),y)
-	iforce-objs += iforce-usb.o
-endif
-
-EXTRA_CFLAGS = -Werror-implicit-function-declaration
+iforce-y := iforce-ff.o iforce-main.o iforce-packets.o
+iforce-$(CONFIG_JOYSTICK_IFORCE_232)	+= iforce-serio.o
+iforce-$(CONFIG_JOYSTICK_IFORCE_USB)	+= iforce-usb.o
diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index d53b9e90023..27b6a3ce18c 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -245,6 +245,7 @@ static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
 		goto err_free_tgfx;
         }
 
+	parport_put_port(pp);
 	return tgfx;
 
  err_free_dev:
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index f9fb7fa10af..56abf3d0e91 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -543,21 +543,25 @@ exit:
 static int xpad_init_output(struct usb_interface *intf, struct usb_xpad *xpad)
 {
 	struct usb_endpoint_descriptor *ep_irq_out;
-	int error = -ENOMEM;
+	int error;
 
 	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX)
 		return 0;
 
 	xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
 					 GFP_KERNEL, &xpad->odata_dma);
-	if (!xpad->odata)
+	if (!xpad->odata) {
+		error = -ENOMEM;
 		goto fail1;
+	}
 
 	mutex_init(&xpad->odata_mutex);
 
 	xpad->irq_out = usb_alloc_urb(0, GFP_KERNEL);
-	if (!xpad->irq_out)
+	if (!xpad->irq_out) {
+		error = -ENOMEM;
 		goto fail2;
+	}
 
 	ep_irq_out = &intf->cur_altsetting->endpoint[1].desc;
 	usb_fill_int_urb(xpad->irq_out, xpad->udev,
@@ -728,7 +732,7 @@ static void xpad_led_disconnect(struct usb_xpad *xpad)
 
 	if (xpad_led) {
 		led_classdev_unregister(&xpad_led->led_cdev);
-		kfree(xpad_led->name);
+		kfree(xpad_led);
 	}
 }
 #else
@@ -756,8 +760,9 @@ static void xpad_close(struct input_dev *dev)
 {
 	struct usb_xpad *xpad = input_get_drvdata(dev);
 
-	if(xpad->xtype != XTYPE_XBOX360W)
+	if (xpad->xtype != XTYPE_XBOX360W)
 		usb_kill_urb(xpad->irq_in);
+
 	xpad_stop_output(xpad);
 }
 
@@ -789,8 +794,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_xpad *xpad;
 	struct input_dev *input_dev;
 	struct usb_endpoint_descriptor *ep_irq_in;
-	int i;
-	int error = -ENOMEM;
+	int i, error;
 
 	for (i = 0; xpad_device[i].idVendor; i++) {
 		if ((le16_to_cpu(udev->descriptor.idVendor) == xpad_device[i].idVendor) &&
@@ -800,17 +804,23 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	xpad = kzalloc(sizeof(struct usb_xpad), GFP_KERNEL);
 	input_dev = input_allocate_device();
-	if (!xpad || !input_dev)
+	if (!xpad || !input_dev) {
+		error = -ENOMEM;
 		goto fail1;
+	}
 
 	xpad->idata = usb_alloc_coherent(udev, XPAD_PKT_LEN,
 					 GFP_KERNEL, &xpad->idata_dma);
-	if (!xpad->idata)
+	if (!xpad->idata) {
+		error = -ENOMEM;
 		goto fail1;
+	}
 
 	xpad->irq_in = usb_alloc_urb(0, GFP_KERNEL);
-	if (!xpad->irq_in)
+	if (!xpad->irq_in) {
+		error = -ENOMEM;
 		goto fail2;
+	}
 
 	xpad->udev = udev;
 	xpad->mapping = xpad_device[i].mapping;
@@ -887,15 +897,15 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	error = xpad_init_output(intf, xpad);
 	if (error)
-		goto fail2;
+		goto fail3;
 
 	error = xpad_init_ff(xpad);
 	if (error)
-		goto fail3;
+		goto fail4;
 
 	error = xpad_led_probe(xpad);
 	if (error)
-		goto fail3;
+		goto fail5;
 
 	ep_irq_in = &intf->cur_altsetting->endpoint[0].desc;
 	usb_fill_int_urb(xpad->irq_in, udev,
@@ -907,34 +917,26 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 
 	error = input_register_device(xpad->dev);
 	if (error)
-		goto fail4;
+		goto fail6;
 
 	usb_set_intfdata(intf, xpad);
 
-	/*
-	 * Submit the int URB immediatly rather than waiting for open
-	 * because we get status messages from the device whether
-	 * or not any controllers are attached.  In fact, it's
-	 * exactly the message that a controller has arrived that
-	 * we're waiting for.
-	 */
 	if (xpad->xtype == XTYPE_XBOX360W) {
-		xpad->irq_in->dev = xpad->udev;
-		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
-		if (error)
-			goto fail4;
-
 		/*
 		 * Setup the message to set the LEDs on the
 		 * controller when it shows up
 		 */
 		xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
-		if(!xpad->bulk_out)
-			goto fail5;
+		if (!xpad->bulk_out) {
+			error = -ENOMEM;
+			goto fail7;
+		}
 
 		xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
-		if(!xpad->bdata)
-			goto fail6;
+		if (!xpad->bdata) {
+			error = -ENOMEM;
+			goto fail8;
+		}
 
 		xpad->bdata[2] = 0x08;
 		switch (intf->cur_altsetting->desc.bInterfaceNumber) {
@@ -955,14 +957,31 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id
 		usb_fill_bulk_urb(xpad->bulk_out, udev,
 				usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
 				xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+
+		/*
+		 * Submit the int URB immediately rather than waiting for open
+		 * because we get status messages from the device whether
+		 * or not any controllers are attached.  In fact, it's
+		 * exactly the message that a controller has arrived that
+		 * we're waiting for.
+		 */
+		xpad->irq_in->dev = xpad->udev;
+		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
+		if (error)
+			goto fail9;
 	}
 
 	return 0;
 
- fail6:	usb_free_urb(xpad->bulk_out);
- fail5:	usb_kill_urb(xpad->irq_in);
- fail4:	usb_free_urb(xpad->irq_in);
- fail3:	xpad_deinit_output(xpad);
+ fail9:	kfree(xpad->bdata);
+ fail8:	usb_free_urb(xpad->bulk_out);
+ fail7:	input_unregister_device(input_dev);
+	input_dev = NULL;
+ fail6:	xpad_led_disconnect(xpad);
+ fail5:	if (input_dev)
+		input_ff_destroy(input_dev);
+ fail4:	xpad_deinit_output(xpad);
+ fail3:	usb_free_urb(xpad->irq_in);
  fail2:	usb_free_coherent(udev, XPAD_PKT_LEN, xpad->idata, xpad->idata_dma);
  fail1:	input_free_device(input_dev);
 	kfree(xpad);
@@ -974,21 +993,24 @@ static void xpad_disconnect(struct usb_interface *intf)
 {
 	struct usb_xpad *xpad = usb_get_intfdata (intf);
 
-	usb_set_intfdata(intf, NULL);
-	if (xpad) {
-		xpad_led_disconnect(xpad);
-		input_unregister_device(xpad->dev);
-		xpad_deinit_output(xpad);
-		if (xpad->xtype == XTYPE_XBOX360W) {
-			usb_kill_urb(xpad->bulk_out);
-			usb_free_urb(xpad->bulk_out);
-			usb_kill_urb(xpad->irq_in);
-		}
-		usb_free_urb(xpad->irq_in);
-		usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
-				xpad->idata, xpad->idata_dma);
-		kfree(xpad);
+	xpad_led_disconnect(xpad);
+	input_unregister_device(xpad->dev);
+	xpad_deinit_output(xpad);
+
+	if (xpad->xtype == XTYPE_XBOX360W) {
+		usb_kill_urb(xpad->bulk_out);
+		usb_free_urb(xpad->bulk_out);
+		usb_kill_urb(xpad->irq_in);
 	}
+
+	usb_free_urb(xpad->irq_in);
+	usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
+			xpad->idata, xpad->idata_dma);
+
+	kfree(xpad->bdata);
+	kfree(xpad);
+
+	usb_set_intfdata(intf, NULL);
 }
 
 static struct usb_driver xpad_driver = {
@@ -1000,10 +1022,7 @@ static struct usb_driver xpad_driver = {
 
 static int __init usb_xpad_init(void)
 {
-	int result = usb_register(&xpad_driver);
-	if (result == 0)
-		printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
-	return result;
+	return usb_register(&xpad_driver);
 }
 
 static void __exit usb_xpad_exit(void)
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b8c51b9781d..f829998fabe 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -179,21 +179,39 @@ config KEYBOARD_GPIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio_keys.
 
+config KEYBOARD_GPIO_POLLED
+	tristate "Polled GPIO buttons"
+	depends on GENERIC_GPIO
+	select INPUT_POLLDEV
+	help
+	  This driver implements support for buttons connected
+	  to GPIO pins that are not capable of generating interrupts.
+
+	  Say Y here if your device has buttons connected
+	  directly to such GPIO pins.  Your board-specific
+	  setup logic must also provide a platform device,
+	  with configuration data saying which GPIOs are used.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gpio_keys_polled.
+
 config KEYBOARD_TCA6416
-	tristate "TCA6416 Keypad Support"
+	tristate "TCA6416/TCA6408A Keypad Support"
 	depends on I2C
 	help
 	  This driver implements basic keypad functionality
-	  for keys connected through TCA6416 IO expander
+	  for keys connected through TCA6416/TCA6408A IO expanders.
 
 	  Say Y here if your device has keys connected to
-	  TCA6416 IO expander. Your board-specific setup logic
+	  TCA6416/TCA6408A IO expander. Your board-specific setup logic
 	  must also provide pin-mask details(of which TCA6416 pins
 	  are used for keypad).
 
-	  If enabled the complete TCA6416 device will be managed through
+	  If enabled the entire TCA6416 device will be managed through
 	  this driver.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called tca6416_keypad.
 
 config KEYBOARD_MATRIX
 	tristate "GPIO driven matrix keypad support"
@@ -443,6 +461,25 @@ config KEYBOARD_OMAP4
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap4-keypad.
 
+config KEYBOARD_SPEAR
+	tristate "ST SPEAR keyboard support"
+	depends on PLAT_SPEAR
+	help
+	  Say Y here if you want to use the SPEAR keyboard.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called spear-keboard.
+
+config KEYBOARD_TC3589X
+	tristate "TC3589X Keypad support"
+	depends on MFD_TC3589X
+	help
+	  Say Y here if you want to use the keypad controller on
+	  TC35892/3 I/O expander.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tc3589x-keypad.
+
 config KEYBOARD_TNETV107X
 	tristate "TI TNETV107X keypad support"
 	depends on ARCH_DAVINCI_TNETV107X
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index a34452e8ebe..8933e9ca938 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
 obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
 obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
+obj-$(CONFIG_KEYBOARD_GPIO_POLLED)	+= gpio_keys_polled.o
 obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
@@ -37,9 +38,11 @@ obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
+obj-$(CONFIG_KEYBOARD_SPEAR)		+= spear-keyboard.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
+obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
 obj-$(CONFIG_KEYBOARD_TNETV107X)	+= tnetv107x-keypad.o
 obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
 obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index b92d1cd5cba..af45d275f68 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -4,7 +4,7 @@
  *		 I2C QWERTY Keypad and IO Expander
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2008-2009 Analog Devices Inc.
+ * Copyright (C) 2008-2010 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -24,29 +24,6 @@
 
 #include <linux/i2c/adp5588.h>
 
- /* Configuration Register1 */
-#define AUTO_INC	(1 << 7)
-#define GPIEM_CFG	(1 << 6)
-#define OVR_FLOW_M	(1 << 5)
-#define INT_CFG		(1 << 4)
-#define OVR_FLOW_IEN	(1 << 3)
-#define K_LCK_IM	(1 << 2)
-#define GPI_IEN		(1 << 1)
-#define KE_IEN		(1 << 0)
-
-/* Interrupt Status Register */
-#define CMP2_INT	(1 << 5)
-#define CMP1_INT	(1 << 4)
-#define OVR_FLOW_INT	(1 << 3)
-#define K_LCK_INT	(1 << 2)
-#define GPI_INT		(1 << 1)
-#define KE_INT		(1 << 0)
-
-/* Key Lock and Event Counter Register */
-#define K_LCK_EN	(1 << 6)
-#define LCK21		0x30
-#define KEC		0xF
-
 /* Key Event Register xy */
 #define KEY_EV_PRESSED		(1 << 7)
 #define KEY_EV_MASK		(0x7F)
@@ -55,10 +32,6 @@
 
 #define KEYP_MAX_EVENT		10
 
-#define MAXGPIO			18
-#define ADP_BANK(offs)		((offs) >> 3)
-#define ADP_BIT(offs)		(1u << ((offs) & 0x7))
-
 /*
  * Early pre 4.0 Silicon required to delay readout by at least 25ms,
  * since the Event Counter Register updated 25ms after the interrupt
@@ -75,7 +48,7 @@ struct adp5588_kpad {
 	const struct adp5588_gpi_map *gpimap;
 	unsigned short gpimapsize;
 #ifdef CONFIG_GPIOLIB
-	unsigned char gpiomap[MAXGPIO];
+	unsigned char gpiomap[ADP5588_MAXGPIO];
 	bool export_gpio;
 	struct gpio_chip gc;
 	struct mutex gpio_lock;	/* Protect cached dir, dat_out */
@@ -103,8 +76,8 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
 static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
 {
 	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
-	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
-	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 
 	return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
 }
@@ -113,8 +86,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip,
 				   unsigned off, int val)
 {
 	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
-	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
-	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 
 	mutex_lock(&kpad->gpio_lock);
 
@@ -132,8 +105,8 @@ static void adp5588_gpio_set_value(struct gpio_chip *chip,
 static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
 {
 	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
-	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
-	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 	int ret;
 
 	mutex_lock(&kpad->gpio_lock);
@@ -150,8 +123,8 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
 					 unsigned off, int val)
 {
 	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
-	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
-	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	unsigned int bank = ADP5588_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP5588_BIT(kpad->gpiomap[off]);
 	int ret;
 
 	mutex_lock(&kpad->gpio_lock);
@@ -176,7 +149,7 @@ static int adp5588_gpio_direction_output(struct gpio_chip *chip,
 static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
 				const struct adp5588_kpad_platform_data *pdata)
 {
-	bool pin_used[MAXGPIO];
+	bool pin_used[ADP5588_MAXGPIO];
 	int n_unused = 0;
 	int i;
 
@@ -191,7 +164,7 @@ static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
 	for (i = 0; i < kpad->gpimapsize; i++)
 		pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
 
-	for (i = 0; i < MAXGPIO; i++)
+	for (i = 0; i < ADP5588_MAXGPIO; i++)
 		if (!pin_used[i])
 			kpad->gpiomap[n_unused++] = i;
 
@@ -234,7 +207,7 @@ static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
 		return error;
 	}
 
-	for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+	for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
 		kpad->dat_out[i] = adp5588_read(kpad->client,
 						GPIO_DAT_OUT1 + i);
 		kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
@@ -318,11 +291,11 @@ static void adp5588_work(struct work_struct *work)
 
 	status = adp5588_read(client, INT_STAT);
 
-	if (status & OVR_FLOW_INT)	/* Unlikely and should never happen */
+	if (status & ADP5588_OVR_FLOW_INT)	/* Unlikely and should never happen */
 		dev_err(&client->dev, "Event Overflow Error\n");
 
-	if (status & KE_INT) {
-		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
+	if (status & ADP5588_KE_INT) {
+		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & ADP5588_KEC;
 		if (ev_cnt) {
 			adp5588_report_events(kpad, ev_cnt);
 			input_sync(kpad->input);
@@ -360,7 +333,7 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 	if (pdata->en_keylock) {
 		ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
 		ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
-		ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN);
+		ret |= adp5588_write(client, KEY_LCK_EC_STAT, ADP5588_K_LCK_EN);
 	}
 
 	for (i = 0; i < KEYP_MAX_EVENT; i++)
@@ -384,7 +357,7 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 	}
 
 	if (gpio_data) {
-		for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+		for (i = 0; i <= ADP5588_BANK(ADP5588_MAXGPIO); i++) {
 			int pull_mask = gpio_data->pullup_dis_mask;
 
 			ret |= adp5588_write(client, GPIO_PULL1 + i,
@@ -392,11 +365,14 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 		}
 	}
 
-	ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
-					OVR_FLOW_INT | K_LCK_INT |
-					GPI_INT | KE_INT); /* Status is W1C */
+	ret |= adp5588_write(client, INT_STAT,
+				ADP5588_CMP2_INT | ADP5588_CMP1_INT |
+				ADP5588_OVR_FLOW_INT | ADP5588_K_LCK_INT |
+				ADP5588_GPI_INT | ADP5588_KE_INT); /* Status is W1C */
 
-	ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN);
+	ret |= adp5588_write(client, CFG, ADP5588_INT_CFG |
+					  ADP5588_OVR_FLOW_IEN |
+					  ADP5588_KE_IEN);
 
 	if (ret < 0) {
 		dev_err(&client->dev, "Write Error\n");
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index d358ef8623f..11478eb2c27 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -63,6 +63,10 @@ static bool atkbd_extra;
 module_param_named(extra, atkbd_extra, bool, 0);
 MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards");
 
+static bool atkbd_terminal;
+module_param_named(terminal, atkbd_terminal, bool, 0);
+MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2");
+
 /*
  * Scancode to keycode tables. These are just the default setting, and
  * are loadable via a userland utility.
@@ -136,7 +140,8 @@ static const unsigned short atkbd_unxlate_table[128] = {
 #define ATKBD_CMD_ENABLE	0x00f4
 #define ATKBD_CMD_RESET_DIS	0x00f5	/* Reset to defaults and disable */
 #define ATKBD_CMD_RESET_DEF	0x00f6	/* Reset to defaults */
-#define ATKBD_CMD_SETALL_MBR	0x00fa
+#define ATKBD_CMD_SETALL_MB	0x00f8	/* Set all keys to give break codes */
+#define ATKBD_CMD_SETALL_MBR	0x00fa  /* ... and repeat */
 #define ATKBD_CMD_RESET_BAT	0x02ff
 #define ATKBD_CMD_RESEND	0x00fe
 #define ATKBD_CMD_EX_ENABLE	0x10ea
@@ -764,6 +769,11 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
 		}
 	}
 
+	if (atkbd_terminal) {
+		ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB);
+		return 3;
+	}
+
 	if (target_set != 3)
 		return 2;
 
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
new file mode 100644
index 00000000000..4c17aff2065
--- /dev/null
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -0,0 +1,261 @@
+/*
+ *  Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ *  This file was based on: /drivers/input/misc/cobalt_btns.c
+ *	Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  also was based on: /drivers/input/keyboard/gpio_keys.c
+ *	Copyright 2005 Phil Blundell
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+
+#define DRV_NAME	"gpio-keys-polled"
+
+struct gpio_keys_button_data {
+	int last_state;
+	int count;
+	int threshold;
+	int can_sleep;
+};
+
+struct gpio_keys_polled_dev {
+	struct input_polled_dev *poll_dev;
+	struct device *dev;
+	struct gpio_keys_platform_data *pdata;
+	struct gpio_keys_button_data data[0];
+};
+
+static void gpio_keys_polled_check_state(struct input_dev *input,
+					 struct gpio_keys_button *button,
+					 struct gpio_keys_button_data *bdata)
+{
+	int state;
+
+	if (bdata->can_sleep)
+		state = !!gpio_get_value_cansleep(button->gpio);
+	else
+		state = !!gpio_get_value(button->gpio);
+
+	if (state != bdata->last_state) {
+		unsigned int type = button->type ?: EV_KEY;
+
+		input_event(input, type, button->code,
+			    !!(state ^ button->active_low));
+		input_sync(input);
+		bdata->count = 0;
+		bdata->last_state = state;
+	}
+}
+
+static void gpio_keys_polled_poll(struct input_polled_dev *dev)
+{
+	struct gpio_keys_polled_dev *bdev = dev->private;
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+	struct input_dev *input = dev->input;
+	int i;
+
+	for (i = 0; i < bdev->pdata->nbuttons; i++) {
+		struct gpio_keys_button_data *bdata = &bdev->data[i];
+
+		if (bdata->count < bdata->threshold)
+			bdata->count++;
+		else
+			gpio_keys_polled_check_state(input, &pdata->buttons[i],
+						     bdata);
+	}
+}
+
+static void gpio_keys_polled_open(struct input_polled_dev *dev)
+{
+	struct gpio_keys_polled_dev *bdev = dev->private;
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+	if (pdata->enable)
+		pdata->enable(bdev->dev);
+}
+
+static void gpio_keys_polled_close(struct input_polled_dev *dev)
+{
+	struct gpio_keys_polled_dev *bdev = dev->private;
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+	if (pdata->disable)
+		pdata->disable(bdev->dev);
+}
+
+static int __devinit gpio_keys_polled_probe(struct platform_device *pdev)
+{
+	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct gpio_keys_polled_dev *bdev;
+	struct input_polled_dev *poll_dev;
+	struct input_dev *input;
+	int error;
+	int i;
+
+	if (!pdata || !pdata->poll_interval)
+		return -EINVAL;
+
+	bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) +
+		       pdata->nbuttons * sizeof(struct gpio_keys_button_data),
+		       GFP_KERNEL);
+	if (!bdev) {
+		dev_err(dev, "no memory for private data\n");
+		return -ENOMEM;
+	}
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		dev_err(dev, "no memory for polled device\n");
+		error = -ENOMEM;
+		goto err_free_bdev;
+	}
+
+	poll_dev->private = bdev;
+	poll_dev->poll = gpio_keys_polled_poll;
+	poll_dev->poll_interval = pdata->poll_interval;
+	poll_dev->open = gpio_keys_polled_open;
+	poll_dev->close = gpio_keys_polled_close;
+
+	input = poll_dev->input;
+
+	input->evbit[0] = BIT(EV_KEY);
+	input->name = pdev->name;
+	input->phys = DRV_NAME"/input0";
+	input->dev.parent = &pdev->dev;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		struct gpio_keys_button *button = &pdata->buttons[i];
+		struct gpio_keys_button_data *bdata = &bdev->data[i];
+		unsigned int gpio = button->gpio;
+		unsigned int type = button->type ?: EV_KEY;
+
+		if (button->wakeup) {
+			dev_err(dev, DRV_NAME " does not support wakeup\n");
+			error = -EINVAL;
+			goto err_free_gpio;
+		}
+
+		error = gpio_request(gpio,
+				     button->desc ? button->desc : DRV_NAME);
+		if (error) {
+			dev_err(dev, "unable to claim gpio %u, err=%d\n",
+				gpio, error);
+			goto err_free_gpio;
+		}
+
+		error = gpio_direction_input(gpio);
+		if (error) {
+			dev_err(dev,
+				"unable to set direction on gpio %u, err=%d\n",
+				gpio, error);
+			goto err_free_gpio;
+		}
+
+		bdata->can_sleep = gpio_cansleep(gpio);
+		bdata->last_state = -1;
+		bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
+						pdata->poll_interval);
+
+		input_set_capability(input, type, button->code);
+	}
+
+	bdev->poll_dev = poll_dev;
+	bdev->dev = dev;
+	bdev->pdata = pdata;
+	platform_set_drvdata(pdev, bdev);
+
+	error = input_register_polled_device(poll_dev);
+	if (error) {
+		dev_err(dev, "unable to register polled device, err=%d\n",
+			error);
+		goto err_free_gpio;
+	}
+
+	/* report initial state of the buttons */
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_keys_polled_check_state(input, &pdata->buttons[i],
+					 &bdev->data[i]);
+
+	return 0;
+
+err_free_gpio:
+	while (--i >= 0)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(poll_dev);
+
+err_free_bdev:
+	kfree(bdev);
+
+	platform_set_drvdata(pdev, NULL);
+	return error;
+}
+
+static int __devexit gpio_keys_polled_remove(struct platform_device *pdev)
+{
+	struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev);
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+	int i;
+
+	input_unregister_polled_device(bdev->poll_dev);
+
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(bdev->poll_dev);
+
+	kfree(bdev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver gpio_keys_polled_driver = {
+	.probe	= gpio_keys_polled_probe,
+	.remove	= __devexit_p(gpio_keys_polled_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init gpio_keys_polled_init(void)
+{
+	return platform_driver_register(&gpio_keys_polled_driver);
+}
+
+static void __exit gpio_keys_polled_exit(void)
+{
+	platform_driver_unregister(&gpio_keys_polled_driver);
+}
+
+module_init(gpio_keys_polled_init);
+module_exit(gpio_keys_polled_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Polled GPIO Buttons driver");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index a72e61ddca9..0e2a19cb43d 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -65,7 +65,6 @@ struct omap_kp {
 
 static DECLARE_TASKLET_DISABLED(kp_tasklet, omap_kp_tasklet, 0);
 
-static int *keymap;
 static unsigned int *row_gpios;
 static unsigned int *col_gpios;
 
@@ -162,20 +161,11 @@ static void omap_kp_scan_keypad(struct omap_kp *omap_kp, unsigned char *state)
 	}
 }
 
-static inline int omap_kp_find_key(int col, int row)
-{
-	int i, key;
-
-	key = KEY(col, row, 0);
-	for (i = 0; keymap[i] != 0; i++)
-		if ((keymap[i] & 0xff000000) == key)
-			return keymap[i] & 0x00ffffff;
-	return -1;
-}
-
 static void omap_kp_tasklet(unsigned long data)
 {
 	struct omap_kp *omap_kp_data = (struct omap_kp *) data;
+	unsigned short *keycodes = omap_kp_data->input->keycode;
+	unsigned int row_shift = get_count_order(omap_kp_data->cols);
 	unsigned char new_state[8], changed, key_down = 0;
 	int col, row;
 	int spurious = 0;
@@ -199,7 +189,7 @@ static void omap_kp_tasklet(unsigned long data)
 			       row, (new_state[col] & (1 << row)) ?
 			       "pressed" : "released");
 #else
-			key = omap_kp_find_key(col, row);
+			key = keycodes[MATRIX_SCAN_CODE(row, col, row_shift)];
 			if (key < 0) {
 				printk(KERN_WARNING
 				      "omap-keypad: Spurious key event %d-%d\n",
@@ -298,13 +288,18 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	struct input_dev *input_dev;
 	struct omap_kp_platform_data *pdata =  pdev->dev.platform_data;
 	int i, col_idx, row_idx, irq_idx, ret;
+	unsigned int row_shift, keycodemax;
 
-	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
-		printk(KERN_ERR "No rows, cols or keymap from pdata\n");
+	if (!pdata->rows || !pdata->cols || !pdata->keymap_data) {
+		printk(KERN_ERR "No rows, cols or keymap_data from pdata\n");
 		return -EINVAL;
 	}
 
-	omap_kp = kzalloc(sizeof(struct omap_kp), GFP_KERNEL);
+	row_shift = get_count_order(pdata->cols);
+	keycodemax = pdata->rows << row_shift;
+
+	omap_kp = kzalloc(sizeof(struct omap_kp) +
+			keycodemax * sizeof(unsigned short), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!omap_kp || !input_dev) {
 		kfree(omap_kp);
@@ -320,7 +315,9 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	if (!cpu_is_omap24xx())
 		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
 
-	keymap = pdata->keymap;
+	input_dev->keycode      = &omap_kp[1];
+	input_dev->keycodesize  = sizeof(unsigned short);
+	input_dev->keycodemax   = keycodemax;
 
 	if (pdata->rep)
 		__set_bit(EV_REP, input_dev->evbit);
@@ -374,8 +371,8 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 
 	/* setup input device */
 	__set_bit(EV_KEY, input_dev->evbit);
-	for (i = 0; keymap[i] != 0; i++)
-		__set_bit(keymap[i] & KEY_MAX, input_dev->keybit);
+	matrix_keypad_build_keymap(pdata->keymap_data, row_shift,
+			input_dev->keycode, input_dev->keybit);
 	input_dev->name = "omap-keypad";
 	input_dev->phys = "omap-keypad/input0";
 	input_dev->dev.parent = &pdev->dev;
@@ -416,7 +413,7 @@ static int __devinit omap_kp_probe(struct platform_device *pdev)
 	return 0;
 err5:
 	for (i = irq_idx - 1; i >=0; i--)
-		free_irq(row_gpios[i], 0);
+		free_irq(row_gpios[i], NULL);
 err4:
 	input_unregister_device(omap_kp->input);
 	input_dev = NULL;
@@ -447,11 +444,11 @@ static int __devexit omap_kp_remove(struct platform_device *pdev)
 			gpio_free(col_gpios[i]);
 		for (i = 0; i < omap_kp->rows; i++) {
 			gpio_free(row_gpios[i]);
-			free_irq(gpio_to_irq(row_gpios[i]), 0);
+			free_irq(gpio_to_irq(row_gpios[i]), NULL);
 		}
 	} else {
 		omap_writew(1, OMAP1_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
-		free_irq(omap_kp->irq, 0);
+		free_irq(omap_kp->irq, NULL);
 	}
 
 	del_timer_sync(&omap_kp->timer);
diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c
new file mode 100644
index 00000000000..bee03d64c45
--- /dev/null
+++ b/drivers/input/keyboard/spear-keyboard.c
@@ -0,0 +1,344 @@
+/*
+ * SPEAr Keyboard Driver
+ * Based on omap-keypad driver
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Rajeev Kumar<rajeev-dlh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeup.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <plat/keyboard.h>
+
+/* Keyboard Registers */
+#define MODE_REG	0x00	/* 16 bit reg */
+#define STATUS_REG	0x0C	/* 2 bit reg */
+#define DATA_REG	0x10	/* 8 bit reg */
+#define INTR_MASK	0x54
+
+/* Register Values */
+/*
+ * pclk freq mask = (APB FEQ -1)= 82 MHZ.Programme bit 15-9 in mode
+ * control register as 1010010(82MHZ)
+ */
+#define PCLK_FREQ_MSK	0xA400	/* 82 MHz */
+#define START_SCAN	0x0100
+#define SCAN_RATE_10	0x0000
+#define SCAN_RATE_20	0x0004
+#define SCAN_RATE_40	0x0008
+#define SCAN_RATE_80	0x000C
+#define MODE_KEYBOARD	0x0002
+#define DATA_AVAIL	0x2
+
+#define KEY_MASK	0xFF000000
+#define KEY_VALUE	0x00FFFFFF
+#define ROW_MASK	0xF0
+#define COLUMN_MASK	0x0F
+#define ROW_SHIFT	4
+
+struct spear_kbd {
+	struct input_dev *input;
+	struct resource *res;
+	void __iomem *io_base;
+	struct clk *clk;
+	unsigned int irq;
+	unsigned short last_key;
+	unsigned short keycodes[256];
+};
+
+static irqreturn_t spear_kbd_interrupt(int irq, void *dev_id)
+{
+	struct spear_kbd *kbd = dev_id;
+	struct input_dev *input = kbd->input;
+	unsigned int key;
+	u8 sts, val;
+
+	sts = readb(kbd->io_base + STATUS_REG);
+	if (sts & DATA_AVAIL)
+		return IRQ_NONE;
+
+	if (kbd->last_key != KEY_RESERVED) {
+		input_report_key(input, kbd->last_key, 0);
+		kbd->last_key = KEY_RESERVED;
+	}
+
+	/* following reads active (row, col) pair */
+	val = readb(kbd->io_base + DATA_REG);
+	key = kbd->keycodes[val];
+
+	input_event(input, EV_MSC, MSC_SCAN, val);
+	input_report_key(input, key, 1);
+	input_sync(input);
+
+	kbd->last_key = key;
+
+	/* clear interrupt */
+	writeb(0, kbd->io_base + STATUS_REG);
+
+	return IRQ_HANDLED;
+}
+
+static int spear_kbd_open(struct input_dev *dev)
+{
+	struct spear_kbd *kbd = input_get_drvdata(dev);
+	int error;
+	u16 val;
+
+	kbd->last_key = KEY_RESERVED;
+
+	error = clk_enable(kbd->clk);
+	if (error)
+		return error;
+
+	/* program keyboard */
+	val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK;
+	writew(val, kbd->io_base + MODE_REG);
+	writeb(1, kbd->io_base + STATUS_REG);
+
+	/* start key scan */
+	val = readw(kbd->io_base + MODE_REG);
+	val |= START_SCAN;
+	writew(val, kbd->io_base + MODE_REG);
+
+	return 0;
+}
+
+static void spear_kbd_close(struct input_dev *dev)
+{
+	struct spear_kbd *kbd = input_get_drvdata(dev);
+	u16 val;
+
+	/* stop key scan */
+	val = readw(kbd->io_base + MODE_REG);
+	val &= ~START_SCAN;
+	writew(val, kbd->io_base + MODE_REG);
+
+	clk_disable(kbd->clk);
+
+	kbd->last_key = KEY_RESERVED;
+}
+
+static int __devinit spear_kbd_probe(struct platform_device *pdev)
+{
+	const struct kbd_platform_data *pdata = pdev->dev.platform_data;
+	const struct matrix_keymap_data *keymap;
+	struct spear_kbd *kbd;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int irq;
+	int error;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "Invalid platform data\n");
+		return -EINVAL;
+	}
+
+	keymap = pdata->keymap;
+	if (!keymap) {
+		dev_err(&pdev->dev, "no keymap defined\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "no keyboard resource defined\n");
+		return -EBUSY;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "not able to get irq for the device\n");
+		return irq;
+	}
+
+	kbd = kzalloc(sizeof(*kbd), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!kbd || !input_dev) {
+		dev_err(&pdev->dev, "out of memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	kbd->input = input_dev;
+	kbd->irq = irq;
+	kbd->res = request_mem_region(res->start, resource_size(res),
+				      pdev->name);
+	if (!kbd->res) {
+		dev_err(&pdev->dev, "keyboard region already claimed\n");
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	kbd->io_base = ioremap(res->start, resource_size(res));
+	if (!kbd->io_base) {
+		dev_err(&pdev->dev, "ioremap failed for kbd_region\n");
+		error = -ENOMEM;
+		goto err_release_mem_region;
+	}
+
+	kbd->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(kbd->clk)) {
+		error = PTR_ERR(kbd->clk);
+		goto err_iounmap;
+	}
+
+	input_dev->name = "Spear Keyboard";
+	input_dev->phys = "keyboard/input0";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->open = spear_kbd_open;
+	input_dev->close = spear_kbd_close;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	if (pdata->rep)
+		__set_bit(EV_REP, input_dev->evbit);
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	input_dev->keycode = kbd->keycodes;
+	input_dev->keycodesize = sizeof(kbd->keycodes[0]);
+	input_dev->keycodemax = ARRAY_SIZE(kbd->keycodes);
+
+	matrix_keypad_build_keymap(keymap, ROW_SHIFT,
+			input_dev->keycode, input_dev->keybit);
+
+	input_set_drvdata(input_dev, kbd);
+
+	error = request_irq(irq, spear_kbd_interrupt, 0, "keyboard", kbd);
+	if (error) {
+		dev_err(&pdev->dev, "request_irq fail\n");
+		goto err_put_clk;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "Unable to register keyboard device\n");
+		goto err_free_irq;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+	platform_set_drvdata(pdev, kbd);
+
+	return 0;
+
+err_free_irq:
+	free_irq(kbd->irq, kbd);
+err_put_clk:
+	clk_put(kbd->clk);
+err_iounmap:
+	iounmap(kbd->io_base);
+err_release_mem_region:
+	release_mem_region(res->start, resource_size(res));
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(kbd);
+
+	return error;
+}
+
+static int __devexit spear_kbd_remove(struct platform_device *pdev)
+{
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+
+	free_irq(kbd->irq, kbd);
+	input_unregister_device(kbd->input);
+	clk_put(kbd->clk);
+	iounmap(kbd->io_base);
+	release_mem_region(kbd->res->start, resource_size(kbd->res));
+	kfree(kbd);
+
+	device_init_wakeup(&pdev->dev, 1);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int spear_kbd_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		clk_enable(kbd->clk);
+
+	if (device_may_wakeup(&pdev->dev))
+		enable_irq_wake(kbd->irq);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int spear_kbd_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct spear_kbd *kbd = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = kbd->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (device_may_wakeup(&pdev->dev))
+		disable_irq_wake(kbd->irq);
+
+	if (input_dev->users)
+		clk_enable(kbd->clk);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops spear_kbd_pm_ops = {
+	.suspend	= spear_kbd_suspend,
+	.resume		= spear_kbd_resume,
+};
+#endif
+
+static struct platform_driver spear_kbd_driver = {
+	.probe		= spear_kbd_probe,
+	.remove		= __devexit_p(spear_kbd_remove),
+	.driver		= {
+		.name	= "keyboard",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &spear_kbd_pm_ops,
+#endif
+	},
+};
+
+static int __init spear_kbd_init(void)
+{
+	return platform_driver_register(&spear_kbd_driver);
+}
+module_init(spear_kbd_init);
+
+static void __exit spear_kbd_exit(void)
+{
+	platform_driver_unregister(&spear_kbd_driver);
+}
+module_exit(spear_kbd_exit);
+
+MODULE_AUTHOR("Rajeev Kumar");
+MODULE_DESCRIPTION("SPEAr Keyboard Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
new file mode 100644
index 00000000000..dbbe761778d
--- /dev/null
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -0,0 +1,472 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Jayeeta Banerjee <jayeeta.banerjee@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * License Terms: GNU General Public License, version 2
+ *
+ * TC35893 MFD Keypad Controller driver
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mfd/tc3589x.h>
+
+/* Maximum supported keypad matrix row/columns size */
+#define TC3589x_MAX_KPROW               8
+#define TC3589x_MAX_KPCOL               12
+
+/* keypad related Constants */
+#define TC3589x_MAX_DEBOUNCE_SETTLE     0xFF
+#define DEDICATED_KEY_VAL		0xFF
+
+/* Pull up/down masks */
+#define TC3589x_NO_PULL_MASK		0x0
+#define TC3589x_PULL_DOWN_MASK		0x1
+#define TC3589x_PULL_UP_MASK		0x2
+#define TC3589x_PULLUP_ALL_MASK		0xAA
+#define TC3589x_IO_PULL_VAL(index, mask)	((mask)<<((index)%4)*2))
+
+/* Bit masks for IOCFG register */
+#define IOCFG_BALLCFG		0x01
+#define IOCFG_IG		0x08
+
+#define KP_EVCODE_COL_MASK	0x0F
+#define KP_EVCODE_ROW_MASK	0x70
+#define KP_RELEASE_EVT_MASK	0x80
+
+#define KP_ROW_SHIFT		4
+
+#define KP_NO_VALID_KEY_MASK	0x7F
+
+/* bit masks for RESTCTRL register */
+#define TC3589x_KBDRST		0x2
+#define TC3589x_IRQRST		0x10
+#define TC3589x_RESET_ALL	0x1B
+
+/* KBDMFS register bit mask */
+#define TC3589x_KBDMFS_EN	0x1
+
+/* CLKEN register bitmask */
+#define KPD_CLK_EN		0x1
+
+/* RSTINTCLR register bit mask */
+#define IRQ_CLEAR		0x1
+
+/* bit masks for keyboard interrupts*/
+#define TC3589x_EVT_LOSS_INT	0x8
+#define TC3589x_EVT_INT		0x4
+#define TC3589x_KBD_LOSS_INT	0x2
+#define TC3589x_KBD_INT		0x1
+
+/* bit masks for keyboard interrupt clear*/
+#define TC3589x_EVT_INT_CLR	0x2
+#define TC3589x_KBD_INT_CLR	0x1
+
+#define TC3589x_KBD_KEYMAP_SIZE     64
+
+/**
+ * struct tc_keypad - data structure used by keypad driver
+ * @input:      pointer to input device object
+ * @board:      keypad platform device
+ * @krow:	number of rows
+ * @kcol:	number of coloumns
+ * @keymap:     matrix scan code table for keycodes
+ */
+struct tc_keypad {
+	struct tc3589x *tc3589x;
+	struct input_dev *input;
+	const struct tc3589x_keypad_platform_data *board;
+	unsigned int krow;
+	unsigned int kcol;
+	unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE];
+	bool keypad_stopped;
+};
+
+static int __devinit tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
+{
+	int ret;
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	u8 settle_time = keypad->board->settle_time;
+	u8 dbounce_period = keypad->board->debounce_period;
+	u8 rows = keypad->board->krow & 0xf;	/* mask out the nibble */
+	u8 column = keypad->board->kcol & 0xf;	/* mask out the nibble */
+
+	/* validate platform configurations */
+	if (keypad->board->kcol > TC3589x_MAX_KPCOL ||
+	    keypad->board->krow > TC3589x_MAX_KPROW ||
+	    keypad->board->debounce_period > TC3589x_MAX_DEBOUNCE_SETTLE ||
+	    keypad->board->settle_time > TC3589x_MAX_DEBOUNCE_SETTLE)
+		return -EINVAL;
+
+	/* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE,
+			(rows << KP_ROW_SHIFT) | column);
+	if (ret < 0)
+		return ret;
+
+	/* configure dedicated key config, no dedicated key selected */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_LSB, DEDICATED_KEY_VAL);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_MSB, DEDICATED_KEY_VAL);
+	if (ret < 0)
+		return ret;
+
+	/* Configure settle time */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, settle_time);
+	if (ret < 0)
+		return ret;
+
+	/* Configure debounce time */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, dbounce_period);
+	if (ret < 0)
+		return ret;
+
+	/* Start of initialise keypad GPIOs */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_IOCFG, 0x0, IOCFG_IG);
+	if (ret < 0)
+		return ret;
+
+	/* Configure pull-up resistors for all row GPIOs */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_LSB,
+					TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_MSB,
+					TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	/* Configure pull-up resistors for all column GPIOs */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_LSB,
+			TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_MSB,
+			TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG2_LSB,
+			TC3589x_PULLUP_ALL_MASK);
+
+	return ret;
+}
+
+#define TC35893_DATA_REGS		4
+#define TC35893_KEYCODE_FIFO_EMPTY	0x7f
+#define TC35893_KEYCODE_FIFO_CLEAR	0xff
+#define TC35893_KEYPAD_ROW_SHIFT	0x3
+
+static irqreturn_t tc3589x_keypad_irq(int irq, void *dev)
+{
+	struct tc_keypad *keypad = dev;
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	u8 i, row_index, col_index, kbd_code, up;
+	u8 code;
+
+	for (i = 0; i < TC35893_DATA_REGS * 2; i++) {
+		kbd_code = tc3589x_reg_read(tc3589x, TC3589x_EVTCODE_FIFO);
+
+		/* loop till fifo is empty and no more keys are pressed */
+		if (kbd_code == TC35893_KEYCODE_FIFO_EMPTY ||
+				kbd_code == TC35893_KEYCODE_FIFO_CLEAR)
+			continue;
+
+		/* valid key is found */
+		col_index = kbd_code & KP_EVCODE_COL_MASK;
+		row_index = (kbd_code & KP_EVCODE_ROW_MASK) >> KP_ROW_SHIFT;
+		code = MATRIX_SCAN_CODE(row_index, col_index,
+						TC35893_KEYPAD_ROW_SHIFT);
+		up = kbd_code & KP_RELEASE_EVT_MASK;
+
+		input_event(keypad->input, EV_MSC, MSC_SCAN, code);
+		input_report_key(keypad->input, keypad->keymap[code], !up);
+		input_sync(keypad->input);
+	}
+
+	/* clear IRQ */
+	tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+			0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+	/* enable IRQ */
+	tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+			0x0, TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+
+	return IRQ_HANDLED;
+}
+
+static int tc3589x_keypad_enable(struct tc_keypad *keypad)
+{
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	int ret;
+
+	/* pull the keypad module out of reset */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* configure KBDMFS */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMFS, 0x0, TC3589x_KBDMFS_EN);
+	if (ret < 0)
+		return ret;
+
+	/* enable the keypad clock */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x0, KPD_CLK_EN);
+	if (ret < 0)
+		return ret;
+
+	/* clear pending IRQs */
+	ret =  tc3589x_set_bits(tc3589x, TC3589x_RSTINTCLR, 0x0, 0x1);
+	if (ret < 0)
+		return ret;
+
+	/* enable the IRQs */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, 0x0,
+					TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+	if (ret < 0)
+		return ret;
+
+	keypad->keypad_stopped = false;
+
+	return ret;
+}
+
+static int tc3589x_keypad_disable(struct tc_keypad *keypad)
+{
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	int ret;
+
+	/* clear IRQ */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+			0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+	if (ret < 0)
+		return ret;
+
+	/* disable all interrupts */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+			~(TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT), 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* disable the keypad module */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x1, 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* put the keypad module into reset */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x1);
+
+	keypad->keypad_stopped = true;
+
+	return ret;
+}
+
+static int tc3589x_keypad_open(struct input_dev *input)
+{
+	int error;
+	struct tc_keypad *keypad = input_get_drvdata(input);
+
+	/* enable the keypad module */
+	error = tc3589x_keypad_enable(keypad);
+	if (error < 0) {
+		dev_err(&input->dev, "failed to enable keypad module\n");
+		return error;
+	}
+
+	error = tc3589x_keypad_init_key_hardware(keypad);
+	if (error < 0) {
+		dev_err(&input->dev, "failed to configure keypad module\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static void tc3589x_keypad_close(struct input_dev *input)
+{
+	struct tc_keypad *keypad = input_get_drvdata(input);
+
+	/* disable the keypad module */
+	tc3589x_keypad_disable(keypad);
+}
+
+static int __devinit tc3589x_keypad_probe(struct platform_device *pdev)
+{
+	struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
+	struct tc_keypad *keypad;
+	struct input_dev *input;
+	const struct tc3589x_keypad_platform_data *plat;
+	int error, irq;
+
+	plat = tc3589x->pdata->keypad;
+	if (!plat) {
+		dev_err(&pdev->dev, "invalid keypad platform data\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	keypad = kzalloc(sizeof(struct tc_keypad), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!keypad || !input) {
+		dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	keypad->board = plat;
+	keypad->input = input;
+	keypad->tc3589x = tc3589x;
+
+	input->id.bustype = BUS_I2C;
+	input->name = pdev->name;
+	input->dev.parent = &pdev->dev;
+
+	input->keycode = keypad->keymap;
+	input->keycodesize = sizeof(keypad->keymap[0]);
+	input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+	input->open = tc3589x_keypad_open;
+	input->close = tc3589x_keypad_close;
+
+	input_set_drvdata(input, keypad);
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	__set_bit(EV_KEY, input->evbit);
+	if (!plat->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	matrix_keypad_build_keymap(plat->keymap_data, 0x3,
+			input->keycode, input->keybit);
+
+	error = request_threaded_irq(irq, NULL,
+			tc3589x_keypad_irq, plat->irqtype,
+			"tc3589x-keypad", keypad);
+	if (error < 0) {
+		dev_err(&pdev->dev,
+				"Could not allocate irq %d,error %d\n",
+				irq, error);
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "Could not register input device\n");
+		goto err_free_irq;
+	}
+
+	/* let platform decide if keypad is a wakeup source or not */
+	device_init_wakeup(&pdev->dev, plat->enable_wakeup);
+	device_set_wakeup_capable(&pdev->dev, plat->enable_wakeup);
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+err_free_irq:
+	free_irq(irq, keypad);
+err_free_mem:
+	input_free_device(input);
+	kfree(keypad);
+	return error;
+}
+
+static int __devexit tc3589x_keypad_remove(struct platform_device *pdev)
+{
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (!keypad->keypad_stopped)
+		tc3589x_keypad_disable(keypad);
+
+	free_irq(irq, keypad);
+
+	input_unregister_device(keypad->input);
+
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tc3589x_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	/* keypad is already off; we do nothing */
+	if (keypad->keypad_stopped)
+		return 0;
+
+	/* if device is not a wakeup source, disable it for powersave */
+	if (!device_may_wakeup(&pdev->dev))
+		tc3589x_keypad_disable(keypad);
+	else
+		enable_irq_wake(irq);
+
+	return 0;
+}
+
+static int tc3589x_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (!keypad->keypad_stopped)
+		return 0;
+
+	/* enable the device to resume normal operations */
+	if (!device_may_wakeup(&pdev->dev))
+		tc3589x_keypad_enable(keypad);
+	else
+		disable_irq_wake(irq);
+
+	return 0;
+}
+
+static const SIMPLE_DEV_PM_OPS(tc3589x_keypad_dev_pm_ops,
+			       tc3589x_keypad_suspend, tc3589x_keypad_resume);
+#endif
+
+static struct platform_driver tc3589x_keypad_driver = {
+	.driver.name  = "tc3589x-keypad",
+	.driver.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+	.driver.pm = &tc3589x_keypad_dev_pm_ops,
+#endif
+	.probe = tc3589x_keypad_probe,
+	.remove = __devexit_p(tc3589x_keypad_remove),
+};
+
+static int __init tc3589x_keypad_init(void)
+{
+	return platform_driver_register(&tc3589x_keypad_driver);
+}
+module_init(tc3589x_keypad_init);
+
+static void __exit tc3589x_keypad_exit(void)
+{
+	return platform_driver_unregister(&tc3589x_keypad_driver);
+}
+module_exit(tc3589x_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jayeeta Banerjee/Sundar Iyer");
+MODULE_DESCRIPTION("TC35893 Keypad Driver");
+MODULE_ALIAS("platform:tc3589x-keypad");
diff --git a/drivers/input/keyboard/tca6416-keypad.c b/drivers/input/keyboard/tca6416-keypad.c
index 00137bebcf9..800fbccf1f0 100644
--- a/drivers/input/keyboard/tca6416-keypad.c
+++ b/drivers/input/keyboard/tca6416-keypad.c
@@ -29,6 +29,7 @@
 
 static const struct i2c_device_id tca6416_id[] = {
 	{ "tca6416-keys", 16, },
+	{ "tca6408-keys", 8, },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tca6416_id);
@@ -46,8 +47,9 @@ struct tca6416_keypad_chip {
 	struct i2c_client *client;
 	struct input_dev *input;
 	struct delayed_work dwork;
-	u16 pinmask;
+	int io_size;
 	int irqnum;
+	u16 pinmask;
 	bool use_polling;
 	struct tca6416_button buttons[0];
 };
@@ -56,7 +58,9 @@ static int tca6416_write_reg(struct tca6416_keypad_chip *chip, int reg, u16 val)
 {
 	int error;
 
-	error = i2c_smbus_write_word_data(chip->client, reg << 1, val);
+	error = chip->io_size > 8 ?
+		i2c_smbus_write_word_data(chip->client, reg << 1, val) :
+		i2c_smbus_write_byte_data(chip->client, reg, val);
 	if (error < 0) {
 		dev_err(&chip->client->dev,
 			"%s failed, reg: %d, val: %d, error: %d\n",
@@ -71,7 +75,9 @@ static int tca6416_read_reg(struct tca6416_keypad_chip *chip, int reg, u16 *val)
 {
 	int retval;
 
-	retval = i2c_smbus_read_word_data(chip->client, reg << 1);
+	retval = chip->io_size > 8 ?
+		 i2c_smbus_read_word_data(chip->client, reg << 1) :
+		 i2c_smbus_read_byte_data(chip->client, reg);
 	if (retval < 0) {
 		dev_err(&chip->client->dev, "%s failed, reg: %d, error: %d\n",
 			__func__, reg, retval);
@@ -224,6 +230,7 @@ static int __devinit tca6416_keypad_probe(struct i2c_client *client,
 
 	chip->client = client;
 	chip->input = input;
+	chip->io_size = id->driver_data;
 	chip->pinmask = pdata->pinmask;
 	chip->use_polling = pdata->use_polling;
 
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index b99b8cbde02..b0c6772851a 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -294,24 +294,6 @@ config INPUT_SGI_BTNS
 	  To compile this driver as a module, choose M here: the
 	  module will be called sgi_btns.
 
-config INPUT_WINBOND_CIR
-	tristate "Winbond IR remote control"
-	depends on X86 && PNP
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_TRIGGERS
-	select BITREVERSE
-	help
-	  Say Y here if you want to use the IR remote functionality found
-	  in some Winbond SuperI/O chips. Currently only the WPCD376I
-	  chip is supported (included in some Intel Media series motherboards).
-
-	  IR Receive and wake-on-IR from suspend and power-off is currently
-	  supported.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called winbond_cir.
-
 config HP_SDC_RTC
 	tristate "HP SDC Real Time Clock"
 	depends on (GSC || HP300) && SERIO
@@ -448,4 +430,28 @@ config INPUT_ADXL34X_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called adxl34x-spi.
 
+config INPUT_CMA3000
+	tristate "VTI CMA3000 Tri-axis accelerometer"
+	help
+	  Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+	  driver
+
+	  This driver currently only supports I2C interface to the
+	  controller. Also select the I2C method.
+
+	  If unsure, say N
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cma3000_d0x.
+
+config INPUT_CMA3000_I2C
+	tristate "Support I2C bus connection"
+	depends on INPUT_CMA3000 && I2C
+	help
+	  Say Y here if you want to use VTI CMA3000_D0x Accelerometer
+	  through I2C interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cma3000_d0x_i2c.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 1fe1f6c8b73..9b4797112c9 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -18,6 +18,8 @@ obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
 obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
 obj-$(CONFIG_INPUT_CM109)		+= cm109.o
+obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
+obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
@@ -38,7 +40,6 @@ obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
-obj-$(CONFIG_INPUT_WINBOND_CIR)		+= winbond-cir.o
 obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
 obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
new file mode 100644
index 00000000000..1633b634226
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -0,0 +1,398 @@
+/*
+ * VTI CMA3000_D0x Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input/cma3000.h>
+
+#include "cma3000_d0x.h"
+
+#define CMA3000_WHOAMI      0x00
+#define CMA3000_REVID       0x01
+#define CMA3000_CTRL        0x02
+#define CMA3000_STATUS      0x03
+#define CMA3000_RSTR        0x04
+#define CMA3000_INTSTATUS   0x05
+#define CMA3000_DOUTX       0x06
+#define CMA3000_DOUTY       0x07
+#define CMA3000_DOUTZ       0x08
+#define CMA3000_MDTHR       0x09
+#define CMA3000_MDFFTMR     0x0A
+#define CMA3000_FFTHR       0x0B
+
+#define CMA3000_RANGE2G    (1 << 7)
+#define CMA3000_RANGE8G    (0 << 7)
+#define CMA3000_BUSI2C     (0 << 4)
+#define CMA3000_MODEMASK   (7 << 1)
+#define CMA3000_GRANGEMASK (1 << 7)
+
+#define CMA3000_STATUS_PERR    1
+#define CMA3000_INTSTATUS_FFDET (1 << 2)
+
+/* Settling time delay in ms */
+#define CMA3000_SETDELAY    30
+
+/* Delay for clearing interrupt in us */
+#define CMA3000_INTDELAY    44
+
+
+/*
+ * Bit weights in mg for bit 0, other bits need
+ * multipy factor 2^n. Eight bit is the sign bit.
+ */
+#define BIT_TO_2G  18
+#define BIT_TO_8G  71
+
+struct cma3000_accl_data {
+	const struct cma3000_bus_ops *bus_ops;
+	const struct cma3000_platform_data *pdata;
+
+	struct device *dev;
+	struct input_dev *input_dev;
+
+	int bit_to_mg;
+	int irq;
+
+	int g_range;
+	u8 mode;
+
+	struct mutex mutex;
+	bool opened;
+	bool suspended;
+};
+
+#define CMA3000_READ(data, reg, msg) \
+	(data->bus_ops->read(data->dev, reg, msg))
+#define CMA3000_SET(data, reg, val, msg) \
+	((data)->bus_ops->write(data->dev, reg, val, msg))
+
+/*
+ * Conversion for each of the eight modes to g, depending
+ * on G range i.e 2G or 8G. Some modes always operate in
+ * 8G.
+ */
+
+static int mode_to_mg[8][2] = {
+	{ 0, 0 },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_8G },
+	{ BIT_TO_8G, BIT_TO_8G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ 0, 0},
+};
+
+static void decode_mg(struct cma3000_accl_data *data, int *datax,
+				int *datay, int *dataz)
+{
+	/* Data in 2's complement, convert to mg */
+	*datax = ((s8)*datax) * data->bit_to_mg;
+	*datay = ((s8)*datay) * data->bit_to_mg;
+	*dataz = ((s8)*dataz) * data->bit_to_mg;
+}
+
+static irqreturn_t cma3000_thread_irq(int irq, void *dev_id)
+{
+	struct cma3000_accl_data *data = dev_id;
+	int datax, datay, dataz;
+	u8 ctrl, mode, range, intr_status;
+
+	intr_status = CMA3000_READ(data, CMA3000_INTSTATUS, "interrupt status");
+	if (intr_status < 0)
+		return IRQ_NONE;
+
+	/* Check if free fall is detected, report immediately */
+	if (intr_status & CMA3000_INTSTATUS_FFDET) {
+		input_report_abs(data->input_dev, ABS_MISC, 1);
+		input_sync(data->input_dev);
+	} else {
+		input_report_abs(data->input_dev, ABS_MISC, 0);
+	}
+
+	datax = CMA3000_READ(data, CMA3000_DOUTX, "X");
+	datay = CMA3000_READ(data, CMA3000_DOUTY, "Y");
+	dataz = CMA3000_READ(data, CMA3000_DOUTZ, "Z");
+
+	ctrl = CMA3000_READ(data, CMA3000_CTRL, "ctrl");
+	mode = (ctrl & CMA3000_MODEMASK) >> 1;
+	range = (ctrl & CMA3000_GRANGEMASK) >> 7;
+
+	data->bit_to_mg = mode_to_mg[mode][range];
+
+	/* Interrupt not for this device */
+	if (data->bit_to_mg == 0)
+		return IRQ_NONE;
+
+	/* Decode register values to milli g */
+	decode_mg(data, &datax, &datay, &dataz);
+
+	input_report_abs(data->input_dev, ABS_X, datax);
+	input_report_abs(data->input_dev, ABS_Y, datay);
+	input_report_abs(data->input_dev, ABS_Z, dataz);
+	input_sync(data->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int cma3000_reset(struct cma3000_accl_data *data)
+{
+	int val;
+
+	/* Reset sequence */
+	CMA3000_SET(data, CMA3000_RSTR, 0x02, "Reset");
+	CMA3000_SET(data, CMA3000_RSTR, 0x0A, "Reset");
+	CMA3000_SET(data, CMA3000_RSTR, 0x04, "Reset");
+
+	/* Settling time delay */
+	mdelay(10);
+
+	val = CMA3000_READ(data, CMA3000_STATUS, "Status");
+	if (val < 0) {
+		dev_err(data->dev, "Reset failed\n");
+		return val;
+	}
+
+	if (val & CMA3000_STATUS_PERR) {
+		dev_err(data->dev, "Parity Error\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cma3000_poweron(struct cma3000_accl_data *data)
+{
+	const struct cma3000_platform_data *pdata = data->pdata;
+	u8 ctrl = 0;
+	int ret;
+
+	if (data->g_range == CMARANGE_2G) {
+		ctrl = (data->mode << 1) | CMA3000_RANGE2G;
+	} else if (data->g_range == CMARANGE_8G) {
+		ctrl = (data->mode << 1) | CMA3000_RANGE8G;
+	} else {
+		dev_info(data->dev,
+			 "Invalid G range specified, assuming 8G\n");
+		ctrl = (data->mode << 1) | CMA3000_RANGE8G;
+	}
+
+	ctrl |= data->bus_ops->ctrl_mod;
+
+	CMA3000_SET(data, CMA3000_MDTHR, pdata->mdthr,
+		    "Motion Detect Threshold");
+	CMA3000_SET(data, CMA3000_MDFFTMR, pdata->mdfftmr,
+		    "Time register");
+	CMA3000_SET(data, CMA3000_FFTHR, pdata->ffthr,
+		    "Free fall threshold");
+	ret = CMA3000_SET(data, CMA3000_CTRL, ctrl, "Mode setting");
+	if (ret < 0)
+		return -EIO;
+
+	msleep(CMA3000_SETDELAY);
+
+	return 0;
+}
+
+static int cma3000_poweroff(struct cma3000_accl_data *data)
+{
+	int ret;
+
+	ret = CMA3000_SET(data, CMA3000_CTRL, CMAMODE_POFF, "Mode setting");
+	msleep(CMA3000_SETDELAY);
+
+	return ret;
+}
+
+static int cma3000_open(struct input_dev *input_dev)
+{
+	struct cma3000_accl_data *data = input_get_drvdata(input_dev);
+
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended)
+		cma3000_poweron(data);
+
+	data->opened = true;
+
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static void cma3000_close(struct input_dev *input_dev)
+{
+	struct cma3000_accl_data *data = input_get_drvdata(input_dev);
+
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended)
+		cma3000_poweroff(data);
+
+	data->opened = false;
+
+	mutex_unlock(&data->mutex);
+}
+
+void cma3000_suspend(struct cma3000_accl_data *data)
+{
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended && data->opened)
+		cma3000_poweroff(data);
+
+	data->suspended = true;
+
+	mutex_unlock(&data->mutex);
+}
+EXPORT_SYMBOL(cma3000_suspend);
+
+
+void cma3000_resume(struct cma3000_accl_data *data)
+{
+	mutex_lock(&data->mutex);
+
+	if (data->suspended && data->opened)
+		cma3000_poweron(data);
+
+	data->suspended = false;
+
+	mutex_unlock(&data->mutex);
+}
+EXPORT_SYMBOL(cma3000_resume);
+
+struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
+				       const struct cma3000_bus_ops *bops)
+{
+	const struct cma3000_platform_data *pdata = dev->platform_data;
+	struct cma3000_accl_data *data;
+	struct input_dev *input_dev;
+	int rev;
+	int error;
+
+	if (!pdata) {
+		dev_err(dev, "platform data not found\n");
+		error = -EINVAL;
+		goto err_out;
+	}
+
+
+	/* if no IRQ return error */
+	if (irq == 0) {
+		error = -EINVAL;
+		goto err_out;
+	}
+
+	data = kzalloc(sizeof(struct cma3000_accl_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->dev = dev;
+	data->input_dev = input_dev;
+	data->bus_ops = bops;
+	data->pdata = pdata;
+	data->irq = irq;
+	mutex_init(&data->mutex);
+
+	data->mode = pdata->mode;
+	if (data->mode < CMAMODE_DEFAULT || data->mode > CMAMODE_POFF) {
+		data->mode = CMAMODE_MOTDET;
+		dev_warn(dev,
+			 "Invalid mode specified, assuming Motion Detect\n");
+	}
+
+	data->g_range = pdata->g_range;
+	if (data->g_range != CMARANGE_2G && data->g_range != CMARANGE_8G) {
+		dev_info(dev,
+			 "Invalid G range specified, assuming 8G\n");
+		data->g_range = CMARANGE_8G;
+	}
+
+	input_dev->name = "cma3000-accelerometer";
+	input_dev->id.bustype = bops->bustype;
+	input_dev->open = cma3000_open;
+	input_dev->close = cma3000_close;
+
+	 __set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_X,
+			-data->g_range, data->g_range, pdata->fuzz_x, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			-data->g_range, data->g_range, pdata->fuzz_y, 0);
+	input_set_abs_params(input_dev, ABS_Z,
+			-data->g_range, data->g_range, pdata->fuzz_z, 0);
+	input_set_abs_params(input_dev, ABS_MISC, 0, 1, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+
+	error = cma3000_reset(data);
+	if (error)
+		goto err_free_mem;
+
+	rev = CMA3000_READ(data, CMA3000_REVID, "Revid");
+	if (rev < 0) {
+		error = rev;
+		goto err_free_mem;
+	}
+
+	pr_info("CMA3000 Accelerometer: Revision %x\n", rev);
+
+	error = request_threaded_irq(irq, NULL, cma3000_thread_irq,
+				     pdata->irqflags | IRQF_ONESHOT,
+				     "cma3000_d0x", data);
+	if (error) {
+		dev_err(dev, "request_threaded_irq failed\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(data->input_dev);
+	if (error) {
+		dev_err(dev, "Unable to register input device\n");
+		goto err_free_irq;
+	}
+
+	return data;
+
+err_free_irq:
+	free_irq(irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL(cma3000_init);
+
+void cma3000_exit(struct cma3000_accl_data *data)
+{
+	free_irq(data->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+}
+EXPORT_SYMBOL(cma3000_exit);
+
+MODULE_DESCRIPTION("CMA3000-D0x Accelerometer Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");
diff --git a/drivers/input/misc/cma3000_d0x.h b/drivers/input/misc/cma3000_d0x.h
new file mode 100644
index 00000000000..2304ce306e1
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x.h
@@ -0,0 +1,42 @@
+/*
+ * VTI CMA3000_D0x Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _INPUT_CMA3000_H
+#define _INPUT_CMA3000_H
+
+#include <linux/types.h>
+#include <linux/input.h>
+
+struct device;
+struct cma3000_accl_data;
+
+struct cma3000_bus_ops {
+	u16 bustype;
+	u8 ctrl_mod;
+	int (*read)(struct device *, u8, char *);
+	int (*write)(struct device *, u8, u8, char *);
+};
+
+struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
+					const struct cma3000_bus_ops *bops);
+void cma3000_exit(struct cma3000_accl_data *);
+void cma3000_suspend(struct cma3000_accl_data *);
+void cma3000_resume(struct cma3000_accl_data *);
+
+#endif
diff --git a/drivers/input/misc/cma3000_d0x_i2c.c b/drivers/input/misc/cma3000_d0x_i2c.c
new file mode 100644
index 00000000000..d100cc5c578
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x_i2c.c
@@ -0,0 +1,143 @@
+/*
+ * Implements I2C interface for VTI CMA300_D0x Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/input/cma3000.h>
+#include "cma3000_d0x.h"
+
+static int cma3000_i2c_set(struct device *dev,
+			   u8 reg, u8 val, char *msg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, reg, val);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"%s failed (%s, %d)\n", __func__, msg, ret);
+	return ret;
+}
+
+static int cma3000_i2c_read(struct device *dev, u8 reg, char *msg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0)
+		dev_err(&client->dev,
+			"%s failed (%s, %d)\n", __func__, msg, ret);
+	return ret;
+}
+
+static const struct cma3000_bus_ops cma3000_i2c_bops = {
+	.bustype	= BUS_I2C,
+#define CMA3000_BUSI2C     (0 << 4)
+	.ctrl_mod	= CMA3000_BUSI2C,
+	.read		= cma3000_i2c_read,
+	.write		= cma3000_i2c_set,
+};
+
+static int __devinit cma3000_i2c_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct cma3000_accl_data *data;
+
+	data = cma3000_init(&client->dev, client->irq, &cma3000_i2c_bops);
+	if (IS_ERR(data))
+		return PTR_ERR(data);
+
+	i2c_set_clientdata(client, data);
+
+	return 0;
+}
+
+static int __devexit cma3000_i2c_remove(struct i2c_client *client)
+{
+	struct cma3000_accl_data *data = i2c_get_clientdata(client);
+
+	cma3000_exit(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int cma3000_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cma3000_accl_data *data = i2c_get_clientdata(client);
+
+	cma3000_suspend(data);
+
+	return 0;
+}
+
+static int cma3000_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cma3000_accl_data *data = i2c_get_clientdata(client);
+
+	cma3000_resume(data);
+
+	return 0;
+}
+
+static const struct dev_pm_ops cma3000_i2c_pm_ops = {
+	.suspend	= cma3000_i2c_suspend,
+	.resume		= cma3000_i2c_resume,
+};
+#endif
+
+static const struct i2c_device_id cma3000_i2c_id[] = {
+	{ "cma3000_d01", 0 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, cma3000_i2c_id);
+
+static struct i2c_driver cma3000_i2c_driver = {
+	.probe		= cma3000_i2c_probe,
+	.remove		= __devexit_p(cma3000_i2c_remove),
+	.id_table	= cma3000_i2c_id,
+	.driver = {
+		.name	= "cma3000_i2c_accl",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &cma3000_i2c_pm_ops,
+#endif
+	},
+};
+
+static int __init cma3000_i2c_init(void)
+{
+	return i2c_add_driver(&cma3000_i2c_driver);
+}
+
+static void __exit cma3000_i2c_exit(void)
+{
+	i2c_del_driver(&cma3000_i2c_driver);
+}
+
+module_init(cma3000_i2c_init);
+module_exit(cma3000_i2c_exit);
+
+MODULE_DESCRIPTION("CMA3000-D0x Accelerometer I2C Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");
diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c
index 4b42ffc0532..08be1a35595 100644
--- a/drivers/input/misc/pcf8574_keypad.c
+++ b/drivers/input/misc/pcf8574_keypad.c
@@ -127,14 +127,6 @@ static int __devinit pcf8574_kp_probe(struct i2c_client *client, const struct i2
 	idev->id.product = 0x0001;
 	idev->id.version = 0x0100;
 
-	input_set_drvdata(idev, lp);
-
-	ret = input_register_device(idev);
-	if (ret) {
-		dev_err(&client->dev, "input_register_device() failed\n");
-		goto fail_register;
-	}
-
 	lp->laststate = read_state(lp);
 
 	ret = request_threaded_irq(client->irq, NULL, pcf8574_kp_irq_handler,
@@ -142,16 +134,21 @@ static int __devinit pcf8574_kp_probe(struct i2c_client *client, const struct i2
 				   DRV_NAME, lp);
 	if (ret) {
 		dev_err(&client->dev, "IRQ %d is not free\n", client->irq);
-		goto fail_irq;
+		goto fail_free_device;
+	}
+
+	ret = input_register_device(idev);
+	if (ret) {
+		dev_err(&client->dev, "input_register_device() failed\n");
+		goto fail_free_irq;
 	}
 
 	i2c_set_clientdata(client, lp);
 	return 0;
 
- fail_irq:
-	input_unregister_device(idev);
- fail_register:
-	input_set_drvdata(idev, NULL);
+ fail_free_irq:
+	free_irq(client->irq, lp);
+ fail_free_device:
 	input_free_device(idev);
  fail_allocate:
 	kfree(lp);
@@ -172,19 +169,29 @@ static int __devexit pcf8574_kp_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int pcf8574_kp_resume(struct i2c_client *client)
+static int pcf8574_kp_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
+
 	enable_irq(client->irq);
 
 	return 0;
 }
 
-static int pcf8574_kp_suspend(struct i2c_client *client, pm_message_t mesg)
+static int pcf8574_kp_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
+
 	disable_irq(client->irq);
 
 	return 0;
 }
+
+static const struct dev_pm_ops pcf8574_kp_pm_ops = {
+	.suspend	= pcf8574_kp_suspend,
+	.resume		= pcf8574_kp_resume,
+};
+
 #else
 # define pcf8574_kp_resume  NULL
 # define pcf8574_kp_suspend NULL
@@ -200,11 +207,12 @@ static struct i2c_driver pcf8574_kp_driver = {
 	.driver = {
 		.name  = DRV_NAME,
 		.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm = &pcf8574_kp_pm_ops,
+#endif
 	},
 	.probe    = pcf8574_kp_probe,
 	.remove   = __devexit_p(pcf8574_kp_remove),
-	.suspend  = pcf8574_kp_suspend,
-	.resume   = pcf8574_kp_resume,
 	.id_table = pcf8574_kp_id,
 };
 
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index b9410784e6a..82542a1c109 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -37,6 +37,7 @@
 #include <linux/fs.h>
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
+#include <linux/input/mt.h>
 #include "../input-compat.h"
 
 static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
@@ -406,8 +407,7 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu
 			goto exit;
 		if (test_bit(ABS_MT_SLOT, dev->absbit)) {
 			int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1;
-			input_mt_create_slots(dev, nslot);
-			input_set_events_per_packet(dev, 6 * nslot);
+			input_mt_init_slots(dev, nslot);
 		} else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) {
 			input_set_events_per_packet(dev, 60);
 		}
@@ -680,6 +680,10 @@ static long uinput_ioctl_handler(struct file *file, unsigned int cmd,
 			retval = uinput_set_bit(arg, swbit, SW_MAX);
 			break;
 
+		case UI_SET_PROPBIT:
+			retval = uinput_set_bit(arg, propbit, INPUT_PROP_MAX);
+			break;
+
 		case UI_SET_PHYS:
 			if (udev->state == UIST_CREATED) {
 				retval = -EINVAL;
diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c
index 1d2205b2480..95577c15ae5 100644
--- a/drivers/input/mouse/hgpk.c
+++ b/drivers/input/mouse/hgpk.c
@@ -40,6 +40,8 @@
 #include "psmouse.h"
 #include "hgpk.h"
 
+#define ILLEGAL_XY 999999
+
 static bool tpdebug;
 module_param(tpdebug, bool, 0644);
 MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG.");
@@ -47,48 +49,150 @@ MODULE_PARM_DESC(tpdebug, "enable debugging, dumping packets to KERN_DEBUG.");
 static int recalib_delta = 100;
 module_param(recalib_delta, int, 0644);
 MODULE_PARM_DESC(recalib_delta,
-	"packets containing a delta this large will cause a recalibration.");
+	"packets containing a delta this large will be discarded, and a "
+	"recalibration may be scheduled.");
 
-static int jumpy_delay = 1000;
+static int jumpy_delay = 20;
 module_param(jumpy_delay, int, 0644);
 MODULE_PARM_DESC(jumpy_delay,
 	"delay (ms) before recal after jumpiness detected");
 
-static int spew_delay = 1000;
+static int spew_delay = 1;
 module_param(spew_delay, int, 0644);
 MODULE_PARM_DESC(spew_delay,
 	"delay (ms) before recal after packet spew detected");
 
-static int recal_guard_time = 2000;
+static int recal_guard_time;
 module_param(recal_guard_time, int, 0644);
 MODULE_PARM_DESC(recal_guard_time,
 	"interval (ms) during which recal will be restarted if packet received");
 
-static int post_interrupt_delay = 1000;
+static int post_interrupt_delay = 40;
 module_param(post_interrupt_delay, int, 0644);
 MODULE_PARM_DESC(post_interrupt_delay,
 	"delay (ms) before recal after recal interrupt detected");
 
+static bool autorecal = true;
+module_param(autorecal, bool, 0644);
+MODULE_PARM_DESC(autorecal, "enable recalibration in the driver");
+
+static char hgpk_mode_name[16];
+module_param_string(hgpk_mode, hgpk_mode_name, sizeof(hgpk_mode_name), 0644);
+MODULE_PARM_DESC(hgpk_mode,
+	"default hgpk mode: mouse, glidesensor or pentablet");
+
+static int hgpk_default_mode = HGPK_MODE_MOUSE;
+
+static const char * const hgpk_mode_names[] = {
+	[HGPK_MODE_MOUSE] = "Mouse",
+	[HGPK_MODE_GLIDESENSOR] = "GlideSensor",
+	[HGPK_MODE_PENTABLET] = "PenTablet",
+};
+
+static int hgpk_mode_from_name(const char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(hgpk_mode_names); i++) {
+		const char *name = hgpk_mode_names[i];
+		if (strlen(name) == len && !strncasecmp(name, buf, len))
+			return i;
+	}
+
+	return HGPK_MODE_INVALID;
+}
+
+/*
+ * see if new value is within 20% of half of old value
+ */
+static int approx_half(int curr, int prev)
+{
+	int belowhalf, abovehalf;
+
+	if (curr < 5 || prev < 5)
+		return 0;
+
+	belowhalf = (prev * 8) / 20;
+	abovehalf = (prev * 12) / 20;
+
+	return belowhalf < curr && curr <= abovehalf;
+}
+
 /*
- * When the touchpad gets ultra-sensitive, one can keep their finger 1/2"
- * above the pad and still have it send packets.  This causes a jump cursor
- * when one places their finger on the pad.  We can probably detect the
- * jump as we see a large deltas (>= 100px).  In mouse mode, I've been
- * unable to even come close to 100px deltas during normal usage, so I think
- * this threshold is safe.  If a large delta occurs, trigger a recalibration.
+ * Throw out oddly large delta packets, and any that immediately follow whose
+ * values are each approximately half of the previous.  It seems that the ALPS
+ * firmware emits errant packets, and they get averaged out slowly.
  */
-static void hgpk_jumpy_hack(struct psmouse *psmouse, int x, int y)
+static int hgpk_discard_decay_hack(struct psmouse *psmouse, int x, int y)
 {
 	struct hgpk_data *priv = psmouse->private;
+	int avx, avy;
+	bool do_recal = false;
+
+	avx = abs(x);
+	avy = abs(y);
+
+	/* discard if too big, or half that but > 4 times the prev delta */
+	if (avx > recalib_delta ||
+		(avx > recalib_delta / 2 && ((avx / 4) > priv->xlast))) {
+		hgpk_err(psmouse, "detected %dpx jump in x\n", x);
+		priv->xbigj = avx;
+	} else if (approx_half(avx, priv->xbigj)) {
+		hgpk_err(psmouse, "detected secondary %dpx jump in x\n", x);
+		priv->xbigj = avx;
+		priv->xsaw_secondary++;
+	} else {
+		if (priv->xbigj && priv->xsaw_secondary > 1)
+			do_recal = true;
+		priv->xbigj = 0;
+		priv->xsaw_secondary = 0;
+	}
+
+	if (avy > recalib_delta ||
+		(avy > recalib_delta / 2 && ((avy / 4) > priv->ylast))) {
+		hgpk_err(psmouse, "detected %dpx jump in y\n", y);
+		priv->ybigj = avy;
+	} else if (approx_half(avy, priv->ybigj)) {
+		hgpk_err(psmouse, "detected secondary %dpx jump in y\n", y);
+		priv->ybigj = avy;
+		priv->ysaw_secondary++;
+	} else {
+		if (priv->ybigj && priv->ysaw_secondary > 1)
+			do_recal = true;
+		priv->ybigj = 0;
+		priv->ysaw_secondary = 0;
+	}
 
-	if (abs(x) > recalib_delta || abs(y) > recalib_delta) {
-		hgpk_err(psmouse, ">%dpx jump detected (%d,%d)\n",
-				recalib_delta, x, y);
-		/* My car gets forty rods to the hogshead and that's the
-		 * way I likes it! */
+	priv->xlast = avx;
+	priv->ylast = avy;
+
+	if (do_recal && jumpy_delay) {
+		hgpk_err(psmouse, "scheduling recalibration\n");
 		psmouse_queue_work(psmouse, &priv->recalib_wq,
 				msecs_to_jiffies(jumpy_delay));
 	}
+
+	return priv->xbigj || priv->ybigj;
+}
+
+static void hgpk_reset_spew_detection(struct hgpk_data *priv)
+{
+	priv->spew_count = 0;
+	priv->dupe_count = 0;
+	priv->x_tally = 0;
+	priv->y_tally = 0;
+	priv->spew_flag = NO_SPEW;
+}
+
+static void hgpk_reset_hack_state(struct psmouse *psmouse)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	priv->abs_x = priv->abs_y = -1;
+	priv->xlast = priv->ylast = ILLEGAL_XY;
+	priv->xbigj = priv->ybigj = 0;
+	priv->xsaw_secondary = priv->ysaw_secondary = 0;
+	hgpk_reset_spew_detection(priv);
 }
 
 /*
@@ -116,20 +220,57 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
 	if (l || r)
 		return;
 
+	/* don't track spew if the workaround feature has been turned off */
+	if (!spew_delay)
+		return;
+
+	if (abs(x) > 3 || abs(y) > 3) {
+		/* no spew, or spew ended */
+		hgpk_reset_spew_detection(priv);
+		return;
+	}
+
+	/* Keep a tally of the overall delta to the cursor position caused by
+	 * the spew */
 	priv->x_tally += x;
 	priv->y_tally += y;
 
-	if (++priv->count > 100) {
+	switch (priv->spew_flag) {
+	case NO_SPEW:
+		/* we're not spewing, but this packet might be the start */
+		priv->spew_flag = MAYBE_SPEWING;
+
+		/* fall-through */
+
+	case MAYBE_SPEWING:
+		priv->spew_count++;
+
+		if (priv->spew_count < SPEW_WATCH_COUNT)
+			break;
+
+		/* excessive spew detected, request recalibration */
+		priv->spew_flag = SPEW_DETECTED;
+
+		/* fall-through */
+
+	case SPEW_DETECTED:
+		/* only recalibrate when the overall delta to the cursor
+		 * is really small. if the spew is causing significant cursor
+		 * movement, it is probably a case of the user moving the
+		 * cursor very slowly across the screen. */
 		if (abs(priv->x_tally) < 3 && abs(priv->y_tally) < 3) {
-			hgpk_dbg(psmouse, "packet spew detected (%d,%d)\n",
+			hgpk_err(psmouse, "packet spew detected (%d,%d)\n",
 				 priv->x_tally, priv->y_tally);
+			priv->spew_flag = RECALIBRATING;
 			psmouse_queue_work(psmouse, &priv->recalib_wq,
 					   msecs_to_jiffies(spew_delay));
 		}
-		/* reset every 100 packets */
-		priv->count = 0;
-		priv->x_tally = 0;
-		priv->y_tally = 0;
+
+		break;
+	case RECALIBRATING:
+		/* we already detected a spew and requested a recalibration,
+		 * just wait for the queue to kick into action. */
+		break;
 	}
 }
 
@@ -143,25 +284,168 @@ static void hgpk_spewing_hack(struct psmouse *psmouse,
  * swr/swl are the left/right buttons.
  * x-neg/y-neg are the x and y delta negative bits
  * x-over/y-over are the x and y overflow bits
+ *
+ * ---
+ *
+ * HGPK Advanced Mode - single-mode format
+ *
+ * byte 0(PT):  1    1    0    0    1    1     1     1
+ * byte 0(GS):  1    1    1    1    1    1     1     1
+ * byte 1:      0   x6   x5   x4   x3   x2    x1    x0
+ * byte 2(PT):  0    0   x9   x8   x7    ? pt-dsw    0
+ * byte 2(GS):  0  x10   x9   x8   x7    ? gs-dsw pt-dsw
+ * byte 3:      0   y9   y8   y7    1    0   swr   swl
+ * byte 4:      0   y6   y5   y4   y3   y2    y1    y0
+ * byte 5:      0   z6   z5   z4   z3   z2    z1    z0
+ *
+ * ?'s are not defined in the protocol spec, may vary between models.
+ *
+ * swr/swl are the left/right buttons.
+ *
+ * pt-dsw/gs-dsw indicate that the pt/gs sensor is detecting a
+ * pen/finger
  */
-static int hgpk_validate_byte(unsigned char *packet)
+static bool hgpk_is_byte_valid(struct psmouse *psmouse, unsigned char *packet)
 {
-	return (packet[0] & 0x0C) != 0x08;
+	struct hgpk_data *priv = psmouse->private;
+	int pktcnt = psmouse->pktcnt;
+	bool valid;
+
+	switch (priv->mode) {
+	case HGPK_MODE_MOUSE:
+		valid = (packet[0] & 0x0C) == 0x08;
+		break;
+
+	case HGPK_MODE_GLIDESENSOR:
+		valid = pktcnt == 1 ?
+			packet[0] == HGPK_GS : !(packet[pktcnt - 1] & 0x80);
+		break;
+
+	case HGPK_MODE_PENTABLET:
+		valid = pktcnt == 1 ?
+			packet[0] == HGPK_PT : !(packet[pktcnt - 1] & 0x80);
+		break;
+
+	default:
+		valid = false;
+		break;
+	}
+
+	if (!valid)
+		hgpk_dbg(psmouse,
+			 "bad data, mode %d (%d) %02x %02x %02x %02x %02x %02x\n",
+			 priv->mode, pktcnt,
+			 psmouse->packet[0], psmouse->packet[1],
+			 psmouse->packet[2], psmouse->packet[3],
+			 psmouse->packet[4], psmouse->packet[5]);
+
+	return valid;
 }
 
-static void hgpk_process_packet(struct psmouse *psmouse)
+static void hgpk_process_advanced_packet(struct psmouse *psmouse)
 {
-	struct input_dev *dev = psmouse->dev;
+	struct hgpk_data *priv = psmouse->private;
+	struct input_dev *idev = psmouse->dev;
 	unsigned char *packet = psmouse->packet;
-	int x, y, left, right;
+	int down = !!(packet[2] & 2);
+	int left = !!(packet[3] & 1);
+	int right = !!(packet[3] & 2);
+	int x = packet[1] | ((packet[2] & 0x78) << 4);
+	int y = packet[4] | ((packet[3] & 0x70) << 3);
+
+	if (priv->mode == HGPK_MODE_GLIDESENSOR) {
+		int pt_down = !!(packet[2] & 1);
+		int finger_down = !!(packet[2] & 2);
+		int z = packet[5];
+
+		input_report_abs(idev, ABS_PRESSURE, z);
+		if (tpdebug)
+			hgpk_dbg(psmouse, "pd=%d fd=%d z=%d",
+				 pt_down, finger_down, z);
+	} else {
+		/*
+		 * PenTablet mode does not report pressure, so we don't
+		 * report it here
+		 */
+		if (tpdebug)
+			hgpk_dbg(psmouse, "pd=%d ", down);
+	}
+
+	if (tpdebug)
+		hgpk_dbg(psmouse, "l=%d r=%d x=%d y=%d\n", left, right, x, y);
+
+	input_report_key(idev, BTN_TOUCH, down);
+	input_report_key(idev, BTN_LEFT, left);
+	input_report_key(idev, BTN_RIGHT, right);
+
+	/*
+	 * If this packet says that the finger was removed, reset our position
+	 * tracking so that we don't erroneously detect a jump on next press.
+	 */
+	if (!down) {
+		hgpk_reset_hack_state(psmouse);
+		goto done;
+	}
+
+	/*
+	 * Weed out duplicate packets (we get quite a few, and they mess up
+	 * our jump detection)
+	 */
+	if (x == priv->abs_x && y == priv->abs_y) {
+		if (++priv->dupe_count > SPEW_WATCH_COUNT) {
+			if (tpdebug)
+				hgpk_dbg(psmouse, "hard spew detected\n");
+			priv->spew_flag = RECALIBRATING;
+			psmouse_queue_work(psmouse, &priv->recalib_wq,
+					   msecs_to_jiffies(spew_delay));
+		}
+		goto done;
+	}
 
-	left = packet[0] & 1;
-	right = (packet[0] >> 1) & 1;
+	/* not a duplicate, continue with position reporting */
+	priv->dupe_count = 0;
+
+	/* Don't apply hacks in PT mode, it seems reliable */
+	if (priv->mode != HGPK_MODE_PENTABLET && priv->abs_x != -1) {
+		int x_diff = priv->abs_x - x;
+		int y_diff = priv->abs_y - y;
+		if (hgpk_discard_decay_hack(psmouse, x_diff, y_diff)) {
+			if (tpdebug)
+				hgpk_dbg(psmouse, "discarding\n");
+			goto done;
+		}
+		hgpk_spewing_hack(psmouse, left, right, x_diff, y_diff);
+	}
 
-	x = packet[1] - ((packet[0] << 4) & 0x100);
-	y = ((packet[0] << 3) & 0x100) - packet[2];
+	input_report_abs(idev, ABS_X, x);
+	input_report_abs(idev, ABS_Y, y);
+	priv->abs_x = x;
+	priv->abs_y = y;
+
+done:
+	input_sync(idev);
+}
+
+static void hgpk_process_simple_packet(struct psmouse *psmouse)
+{
+	struct input_dev *dev = psmouse->dev;
+	unsigned char *packet = psmouse->packet;
+	int left = packet[0] & 1;
+	int right = (packet[0] >> 1) & 1;
+	int x = packet[1] - ((packet[0] << 4) & 0x100);
+	int y = ((packet[0] << 3) & 0x100) - packet[2];
+
+	if (packet[0] & 0xc0)
+		hgpk_dbg(psmouse,
+			 "overflow -- 0x%02x 0x%02x 0x%02x\n",
+			 packet[0], packet[1], packet[2]);
+
+	if (hgpk_discard_decay_hack(psmouse, x, y)) {
+		if (tpdebug)
+			hgpk_dbg(psmouse, "discarding\n");
+		return;
+	}
 
-	hgpk_jumpy_hack(psmouse, x, y);
 	hgpk_spewing_hack(psmouse, left, right, x, y);
 
 	if (tpdebug)
@@ -180,15 +464,14 @@ static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
 {
 	struct hgpk_data *priv = psmouse->private;
 
-	if (hgpk_validate_byte(psmouse->packet)) {
-		hgpk_dbg(psmouse, "%s: (%d) %02x %02x %02x\n",
-				__func__, psmouse->pktcnt, psmouse->packet[0],
-				psmouse->packet[1], psmouse->packet[2]);
+	if (!hgpk_is_byte_valid(psmouse, psmouse->packet))
 		return PSMOUSE_BAD_DATA;
-	}
 
 	if (psmouse->pktcnt >= psmouse->pktsize) {
-		hgpk_process_packet(psmouse);
+		if (priv->mode == HGPK_MODE_MOUSE)
+			hgpk_process_simple_packet(psmouse);
+		else
+			hgpk_process_advanced_packet(psmouse);
 		return PSMOUSE_FULL_PACKET;
 	}
 
@@ -210,33 +493,176 @@ static psmouse_ret_t hgpk_process_byte(struct psmouse *psmouse)
 	return PSMOUSE_GOOD_DATA;
 }
 
+static int hgpk_select_mode(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	struct hgpk_data *priv = psmouse->private;
+	int i;
+	int cmd;
+
+	/*
+	 * 4 disables to enable advanced mode
+	 * then 3 0xf2 bytes as the preamble for GS/PT selection
+	 */
+	const int advanced_init[] = {
+		PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE,
+		PSMOUSE_CMD_DISABLE, PSMOUSE_CMD_DISABLE,
+		0xf2, 0xf2, 0xf2,
+	};
+
+	switch (priv->mode) {
+	case HGPK_MODE_MOUSE:
+		psmouse->pktsize = 3;
+		break;
+
+	case HGPK_MODE_GLIDESENSOR:
+	case HGPK_MODE_PENTABLET:
+		psmouse->pktsize = 6;
+
+		/* Switch to 'Advanced mode.', four disables in a row. */
+		for (i = 0; i < ARRAY_SIZE(advanced_init); i++)
+			if (ps2_command(ps2dev, NULL, advanced_init[i]))
+				return -EIO;
+
+		/* select between GlideSensor (mouse) or PenTablet */
+		cmd = priv->mode == HGPK_MODE_GLIDESENSOR ?
+			PSMOUSE_CMD_SETSCALE11 : PSMOUSE_CMD_SETSCALE21;
+
+		if (ps2_command(ps2dev, NULL, cmd))
+			return -EIO;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void hgpk_setup_input_device(struct input_dev *input,
+				    struct input_dev *old_input,
+				    enum hgpk_mode mode)
+{
+	if (old_input) {
+		input->name = old_input->name;
+		input->phys = old_input->phys;
+		input->id = old_input->id;
+		input->dev.parent = old_input->dev.parent;
+	}
+
+	memset(input->evbit, 0, sizeof(input->evbit));
+	memset(input->relbit, 0, sizeof(input->relbit));
+	memset(input->keybit, 0, sizeof(input->keybit));
+
+	/* All modes report left and right buttons */
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(BTN_LEFT, input->keybit);
+	__set_bit(BTN_RIGHT, input->keybit);
+
+	switch (mode) {
+	case HGPK_MODE_MOUSE:
+		__set_bit(EV_REL, input->evbit);
+		__set_bit(REL_X, input->relbit);
+		__set_bit(REL_Y, input->relbit);
+		break;
+
+	case HGPK_MODE_GLIDESENSOR:
+		__set_bit(BTN_TOUCH, input->keybit);
+		__set_bit(BTN_TOOL_FINGER, input->keybit);
+
+		__set_bit(EV_ABS, input->evbit);
+
+		/* GlideSensor has pressure sensor, PenTablet does not */
+		input_set_abs_params(input, ABS_PRESSURE, 0, 15, 0, 0);
+
+		/* From device specs */
+		input_set_abs_params(input, ABS_X, 0, 399, 0, 0);
+		input_set_abs_params(input, ABS_Y, 0, 290, 0, 0);
+
+		/* Calculated by hand based on usable size (52mm x 38mm) */
+		input_abs_set_res(input, ABS_X, 8);
+		input_abs_set_res(input, ABS_Y, 8);
+		break;
+
+	case HGPK_MODE_PENTABLET:
+		__set_bit(BTN_TOUCH, input->keybit);
+		__set_bit(BTN_TOOL_FINGER, input->keybit);
+
+		__set_bit(EV_ABS, input->evbit);
+
+		/* From device specs */
+		input_set_abs_params(input, ABS_X, 0, 999, 0, 0);
+		input_set_abs_params(input, ABS_Y, 5, 239, 0, 0);
+
+		/* Calculated by hand based on usable size (156mm x 38mm) */
+		input_abs_set_res(input, ABS_X, 6);
+		input_abs_set_res(input, ABS_Y, 8);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+static int hgpk_reset_device(struct psmouse *psmouse, bool recalibrate)
+{
+	int err;
+
+	psmouse_reset(psmouse);
+
+	if (recalibrate) {
+		struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+		/* send the recalibrate request */
+		if (ps2_command(ps2dev, NULL, 0xf5) ||
+		    ps2_command(ps2dev, NULL, 0xf5) ||
+		    ps2_command(ps2dev, NULL, 0xe6) ||
+		    ps2_command(ps2dev, NULL, 0xf5)) {
+			return -1;
+		}
+
+		/* according to ALPS, 150mS is required for recalibration */
+		msleep(150);
+	}
+
+	err = hgpk_select_mode(psmouse);
+	if (err) {
+		hgpk_err(psmouse, "failed to select mode\n");
+		return err;
+	}
+
+	hgpk_reset_hack_state(psmouse);
+
+	return 0;
+}
+
 static int hgpk_force_recalibrate(struct psmouse *psmouse)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	struct hgpk_data *priv = psmouse->private;
+	int err;
 
 	/* C-series touchpads added the recalibrate command */
 	if (psmouse->model < HGPK_MODEL_C)
 		return 0;
 
+	if (!autorecal) {
+		hgpk_dbg(psmouse, "recalibrations disabled, ignoring\n");
+		return 0;
+	}
+
+	hgpk_dbg(psmouse, "recalibrating touchpad..\n");
+
 	/* we don't want to race with the irq handler, nor with resyncs */
 	psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
 
 	/* start by resetting the device */
-	psmouse_reset(psmouse);
-
-	/* send the recalibrate request */
-	if (ps2_command(ps2dev, NULL, 0xf5) ||
-	    ps2_command(ps2dev, NULL, 0xf5) ||
-	    ps2_command(ps2dev, NULL, 0xe6) ||
-	    ps2_command(ps2dev, NULL, 0xf5)) {
-		return -1;
-	}
-
-	/* according to ALPS, 150mS is required for recalibration */
-	msleep(150);
+	err = hgpk_reset_device(psmouse, true);
+	if (err)
+		return err;
 
-	/* XXX: If a finger is down during this delay, recalibration will
+	/*
+	 * XXX: If a finger is down during this delay, recalibration will
 	 * detect capacitance incorrectly.  This is a hardware bug, and
 	 * we don't have a good way to deal with it.  The 2s window stuff
 	 * (below) is our best option for now.
@@ -247,25 +673,35 @@ static int hgpk_force_recalibrate(struct psmouse *psmouse)
 
 	psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
 
-	/* After we recalibrate, we shouldn't get any packets for 2s.  If
-	 * we do, it's likely that someone's finger was on the touchpad.
-	 * If someone's finger *was* on the touchpad, it's probably
-	 * miscalibrated.  So, we should schedule another recalibration
+	if (tpdebug)
+		hgpk_dbg(psmouse, "touchpad reactivated\n");
+
+	/*
+	 * If we get packets right away after recalibrating, it's likely
+	 * that a finger was on the touchpad.  If so, it's probably
+	 * miscalibrated, so we optionally schedule another.
 	 */
-	priv->recalib_window = jiffies +  msecs_to_jiffies(recal_guard_time);
+	if (recal_guard_time)
+		priv->recalib_window = jiffies +
+			msecs_to_jiffies(recal_guard_time);
 
 	return 0;
 }
 
 /*
- * This kills power to the touchpad; according to ALPS, current consumption
- * goes down to 50uA after running this.  To turn power back on, we drive
- * MS-DAT low.
+ * This puts the touchpad in a power saving mode; according to ALPS, current
+ * consumption goes down to 50uA after running this.  To turn power back on,
+ * we drive MS-DAT low.  Measuring with a 1mA resolution ammeter says that
+ * the current on the SUS_3.3V rail drops from 3mA or 4mA to 0 when we do this.
+ *
+ * We have no formal spec that details this operation -- the low-power
+ * sequence came from a long-lost email trail.
  */
-static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
+static int hgpk_toggle_powersave(struct psmouse *psmouse, int enable)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	int timeo;
+	int err;
 
 	/* Added on D-series touchpads */
 	if (psmouse->model < HGPK_MODEL_D)
@@ -279,24 +715,27 @@ static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
 		 * the controller.  Once we get an ACK back from it, it
 		 * means we can continue with the touchpad re-init.  ALPS
 		 * tells us that 1s should be long enough, so set that as
-		 * the upper bound.
+		 * the upper bound. (in practice, it takes about 3 loops.)
 		 */
 		for (timeo = 20; timeo > 0; timeo--) {
 			if (!ps2_sendbyte(&psmouse->ps2dev,
 					PSMOUSE_CMD_DISABLE, 20))
 				break;
-			msleep(50);
+			msleep(25);
 		}
 
-		psmouse_reset(psmouse);
+		err = hgpk_reset_device(psmouse, false);
+		if (err) {
+			hgpk_err(psmouse, "Failed to reset device!\n");
+			return err;
+		}
 
 		/* should be all set, enable the touchpad */
 		ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
 		psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
-
+		hgpk_dbg(psmouse, "Touchpad powered up.\n");
 	} else {
 		hgpk_dbg(psmouse, "Powering off touchpad.\n");
-		psmouse_set_state(psmouse, PSMOUSE_IGNORE);
 
 		if (ps2_command(ps2dev, NULL, 0xec) ||
 		    ps2_command(ps2dev, NULL, 0xec) ||
@@ -304,6 +743,8 @@ static int hgpk_toggle_power(struct psmouse *psmouse, int enable)
 			return -1;
 		}
 
+		psmouse_set_state(psmouse, PSMOUSE_IGNORE);
+
 		/* probably won't see an ACK, the touchpad will be off */
 		ps2_sendbyte(&psmouse->ps2dev, 0xec, 20);
 	}
@@ -319,17 +760,20 @@ static int hgpk_poll(struct psmouse *psmouse)
 
 static int hgpk_reconnect(struct psmouse *psmouse)
 {
-	/* During suspend/resume the ps2 rails remain powered.  We don't want
+	struct hgpk_data *priv = psmouse->private;
+
+	/*
+	 * During suspend/resume the ps2 rails remain powered.  We don't want
 	 * to do a reset because it's flush data out of buffers; however,
-	 * earlier prototypes (B1) had some brokenness that required a reset. */
+	 * earlier prototypes (B1) had some brokenness that required a reset.
+	 */
 	if (olpc_board_at_least(olpc_board(0xb2)))
 		if (psmouse->ps2dev.serio->dev.power.power_state.event !=
 				PM_EVENT_ON)
 			return 0;
 
-	psmouse_reset(psmouse);
-
-	return 0;
+	priv->powered = 1;
+	return hgpk_reset_device(psmouse, false);
 }
 
 static ssize_t hgpk_show_powered(struct psmouse *psmouse, void *data, char *buf)
@@ -355,7 +799,7 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data,
 		 * hgpk_toggle_power will deal w/ state so
 		 * we're not racing w/ irq
 		 */
-		err = hgpk_toggle_power(psmouse, value);
+		err = hgpk_toggle_powersave(psmouse, value);
 		if (!err)
 			priv->powered = value;
 	}
@@ -366,6 +810,65 @@ static ssize_t hgpk_set_powered(struct psmouse *psmouse, void *data,
 __PSMOUSE_DEFINE_ATTR(powered, S_IWUSR | S_IRUGO, NULL,
 		      hgpk_show_powered, hgpk_set_powered, false);
 
+static ssize_t attr_show_mode(struct psmouse *psmouse, void *data, char *buf)
+{
+	struct hgpk_data *priv = psmouse->private;
+
+	return sprintf(buf, "%s\n", hgpk_mode_names[priv->mode]);
+}
+
+static ssize_t attr_set_mode(struct psmouse *psmouse, void *data,
+			     const char *buf, size_t len)
+{
+	struct hgpk_data *priv = psmouse->private;
+	enum hgpk_mode old_mode = priv->mode;
+	enum hgpk_mode new_mode = hgpk_mode_from_name(buf, len);
+	struct input_dev *old_dev = psmouse->dev;
+	struct input_dev *new_dev;
+	int err;
+
+	if (new_mode == HGPK_MODE_INVALID)
+		return -EINVAL;
+
+	if (old_mode == new_mode)
+		return len;
+
+	new_dev = input_allocate_device();
+	if (!new_dev)
+		return -ENOMEM;
+
+	psmouse_set_state(psmouse, PSMOUSE_INITIALIZING);
+
+	/* Switch device into the new mode */
+	priv->mode = new_mode;
+	err = hgpk_reset_device(psmouse, false);
+	if (err)
+		goto err_try_restore;
+
+	hgpk_setup_input_device(new_dev, old_dev, new_mode);
+
+	psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
+
+	err = input_register_device(new_dev);
+	if (err)
+		goto err_try_restore;
+
+	psmouse->dev = new_dev;
+	input_unregister_device(old_dev);
+
+	return len;
+
+err_try_restore:
+	input_free_device(new_dev);
+	priv->mode = old_mode;
+	hgpk_reset_device(psmouse, false);
+
+	return err;
+}
+
+PSMOUSE_DEFINE_ATTR(hgpk_mode, S_IWUSR | S_IRUGO, NULL,
+		    attr_show_mode, attr_set_mode);
+
 static ssize_t hgpk_trigger_recal_show(struct psmouse *psmouse,
 		void *data, char *buf)
 {
@@ -401,6 +904,8 @@ static void hgpk_disconnect(struct psmouse *psmouse)
 
 	device_remove_file(&psmouse->ps2dev.serio->dev,
 			   &psmouse_attr_powered.dattr);
+	device_remove_file(&psmouse->ps2dev.serio->dev,
+			   &psmouse_attr_hgpk_mode.dattr);
 
 	if (psmouse->model >= HGPK_MODEL_C)
 		device_remove_file(&psmouse->ps2dev.serio->dev,
@@ -416,14 +921,13 @@ static void hgpk_recalib_work(struct work_struct *work)
 	struct hgpk_data *priv = container_of(w, struct hgpk_data, recalib_wq);
 	struct psmouse *psmouse = priv->psmouse;
 
-	hgpk_dbg(psmouse, "recalibrating touchpad..\n");
-
 	if (hgpk_force_recalibrate(psmouse))
 		hgpk_err(psmouse, "recalibration failed!\n");
 }
 
 static int hgpk_register(struct psmouse *psmouse)
 {
+	struct hgpk_data *priv = psmouse->private;
 	int err;
 
 	/* register handlers */
@@ -431,13 +935,14 @@ static int hgpk_register(struct psmouse *psmouse)
 	psmouse->poll = hgpk_poll;
 	psmouse->disconnect = hgpk_disconnect;
 	psmouse->reconnect = hgpk_reconnect;
-	psmouse->pktsize = 3;
 
 	/* Disable the idle resync. */
 	psmouse->resync_time = 0;
 	/* Reset after a lot of bad bytes. */
 	psmouse->resetafter = 1024;
 
+	hgpk_setup_input_device(psmouse->dev, NULL, priv->mode);
+
 	err = device_create_file(&psmouse->ps2dev.serio->dev,
 				 &psmouse_attr_powered.dattr);
 	if (err) {
@@ -445,6 +950,13 @@ static int hgpk_register(struct psmouse *psmouse)
 		return err;
 	}
 
+	err = device_create_file(&psmouse->ps2dev.serio->dev,
+				 &psmouse_attr_hgpk_mode.dattr);
+	if (err) {
+		hgpk_err(psmouse, "Failed creating 'hgpk_mode' sysfs node\n");
+		goto err_remove_powered;
+	}
+
 	/* C-series touchpads added the recalibrate command */
 	if (psmouse->model >= HGPK_MODEL_C) {
 		err = device_create_file(&psmouse->ps2dev.serio->dev,
@@ -452,30 +964,40 @@ static int hgpk_register(struct psmouse *psmouse)
 		if (err) {
 			hgpk_err(psmouse,
 				"Failed creating 'recalibrate' sysfs node\n");
-			device_remove_file(&psmouse->ps2dev.serio->dev,
-					&psmouse_attr_powered.dattr);
-			return err;
+			goto err_remove_mode;
 		}
 	}
 
 	return 0;
+
+err_remove_mode:
+	device_remove_file(&psmouse->ps2dev.serio->dev,
+			   &psmouse_attr_hgpk_mode.dattr);
+err_remove_powered:
+	device_remove_file(&psmouse->ps2dev.serio->dev,
+			   &psmouse_attr_powered.dattr);
+	return err;
 }
 
 int hgpk_init(struct psmouse *psmouse)
 {
 	struct hgpk_data *priv;
-	int err = -ENOMEM;
+	int err;
 
 	priv = kzalloc(sizeof(struct hgpk_data), GFP_KERNEL);
-	if (!priv)
+	if (!priv) {
+		err = -ENOMEM;
 		goto alloc_fail;
+	}
 
 	psmouse->private = priv;
+
 	priv->psmouse = psmouse;
 	priv->powered = true;
+	priv->mode = hgpk_default_mode;
 	INIT_DELAYED_WORK(&priv->recalib_wq, hgpk_recalib_work);
 
-	err = psmouse_reset(psmouse);
+	err = hgpk_reset_device(psmouse, false);
 	if (err)
 		goto init_fail;
 
@@ -531,3 +1053,14 @@ int hgpk_detect(struct psmouse *psmouse, bool set_properties)
 
 	return 0;
 }
+
+void hgpk_module_init(void)
+{
+	hgpk_default_mode = hgpk_mode_from_name(hgpk_mode_name,
+						strlen(hgpk_mode_name));
+	if (hgpk_default_mode == HGPK_MODE_INVALID) {
+		hgpk_default_mode = HGPK_MODE_MOUSE;
+		strlcpy(hgpk_mode_name, hgpk_mode_names[HGPK_MODE_MOUSE],
+			sizeof(hgpk_mode_name));
+	}
+}
diff --git a/drivers/input/mouse/hgpk.h b/drivers/input/mouse/hgpk.h
index d61cfd3ee9c..311c0e87fcb 100644
--- a/drivers/input/mouse/hgpk.h
+++ b/drivers/input/mouse/hgpk.h
@@ -5,6 +5,9 @@
 #ifndef _HGPK_H
 #define _HGPK_H
 
+#define HGPK_GS		0xff       /* The GlideSensor */
+#define HGPK_PT		0xcf       /* The PenTablet */
+
 enum hgpk_model_t {
 	HGPK_MODEL_PREA = 0x0a,	/* pre-B1s */
 	HGPK_MODEL_A = 0x14,	/* found on B1s, PT disabled in hardware */
@@ -13,12 +16,34 @@ enum hgpk_model_t {
 	HGPK_MODEL_D = 0x50,	/* C1, mass production */
 };
 
+enum hgpk_spew_flag {
+	NO_SPEW,
+	MAYBE_SPEWING,
+	SPEW_DETECTED,
+	RECALIBRATING,
+};
+
+#define SPEW_WATCH_COUNT 42  /* at 12ms/packet, this is 1/2 second */
+
+enum hgpk_mode {
+	HGPK_MODE_MOUSE,
+	HGPK_MODE_GLIDESENSOR,
+	HGPK_MODE_PENTABLET,
+	HGPK_MODE_INVALID
+};
+
 struct hgpk_data {
 	struct psmouse *psmouse;
+	enum hgpk_mode mode;
 	bool powered;
-	int count, x_tally, y_tally;	/* hardware workaround stuff */
+	enum hgpk_spew_flag spew_flag;
+	int spew_count, x_tally, y_tally;	/* spew detection */
 	unsigned long recalib_window;
 	struct delayed_work recalib_wq;
+	int abs_x, abs_y;
+	int dupe_count;
+	int xbigj, ybigj, xlast, ylast; /* jumpiness detection */
+	int xsaw_secondary, ysaw_secondary; /* jumpiness detection */
 };
 
 #define hgpk_dbg(psmouse, format, arg...)		\
@@ -33,9 +58,13 @@ struct hgpk_data {
 	dev_notice(&(psmouse)->ps2dev.serio->dev, format, ## arg)
 
 #ifdef CONFIG_MOUSE_PS2_OLPC
+void hgpk_module_init(void);
 int hgpk_detect(struct psmouse *psmouse, bool set_properties);
 int hgpk_init(struct psmouse *psmouse);
 #else
+static inline void hgpk_module_init(void)
+{
+}
 static inline int hgpk_detect(struct psmouse *psmouse, bool set_properties)
 {
 	return -ENODEV;
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index cd9d0c97e42..3f74baee102 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -1711,6 +1711,7 @@ static int __init psmouse_init(void)
 
 	lifebook_module_init();
 	synaptics_module_init();
+	hgpk_module_init();
 
 	kpsmoused_wq = create_singlethread_workqueue("kpsmoused");
 	if (!kpsmoused_wq) {
diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index 2e300a46055..da392c22fc6 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -25,7 +25,7 @@
 
 #include <linux/module.h>
 #include <linux/dmi.h>
-#include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/serio.h>
 #include <linux/libps2.h>
 #include <linux/slab.h>
@@ -279,6 +279,25 @@ static void synaptics_set_rate(struct psmouse *psmouse, unsigned int rate)
 	synaptics_mode_cmd(psmouse, priv->mode);
 }
 
+static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse)
+{
+	static unsigned char param = 0xc8;
+	struct synaptics_data *priv = psmouse->private;
+
+	if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
+		return 0;
+
+	if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL))
+		return -1;
+	if (ps2_command(&psmouse->ps2dev, &param, PSMOUSE_CMD_SETRATE))
+		return -1;
+
+	/* Advanced gesture mode also sends multi finger data */
+	priv->capabilities |= BIT(1);
+
+	return 0;
+}
+
 /*****************************************************************************
  *	Synaptics pass-through PS/2 port support
  ****************************************************************************/
@@ -380,7 +399,9 @@ static void synaptics_pt_create(struct psmouse *psmouse)
  *	Functions to interpret the absolute mode packets
  ****************************************************************************/
 
-static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data *priv, struct synaptics_hw_state *hw)
+static int synaptics_parse_hw_state(const unsigned char buf[],
+				    struct synaptics_data *priv,
+				    struct synaptics_hw_state *hw)
 {
 	memset(hw, 0, sizeof(struct synaptics_hw_state));
 
@@ -397,6 +418,14 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data
 			 ((buf[0] & 0x04) >> 1) |
 			 ((buf[3] & 0x04) >> 2));
 
+		if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) && hw->w == 2) {
+			/* Gesture packet: (x, y, z) at half resolution */
+			priv->mt.x = (((buf[4] & 0x0f) << 8) | buf[1]) << 1;
+			priv->mt.y = (((buf[4] & 0xf0) << 4) | buf[2]) << 1;
+			priv->mt.z = ((buf[3] & 0x30) | (buf[5] & 0x0f)) << 1;
+			return 1;
+		}
+
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 
@@ -452,6 +481,36 @@ static void synaptics_parse_hw_state(unsigned char buf[], struct synaptics_data
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 	}
+
+	return 0;
+}
+
+static void set_slot(struct input_dev *dev, int slot, bool active, int x, int y)
+{
+	input_mt_slot(dev, slot);
+	input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
+	if (active) {
+		input_report_abs(dev, ABS_MT_POSITION_X, x);
+		input_report_abs(dev, ABS_MT_POSITION_Y,
+				 YMAX_NOMINAL + YMIN_NOMINAL - y);
+	}
+}
+
+static void synaptics_report_semi_mt_data(struct input_dev *dev,
+					  const struct synaptics_hw_state *a,
+					  const struct synaptics_hw_state *b,
+					  int num_fingers)
+{
+	if (num_fingers >= 2) {
+		set_slot(dev, 0, true, min(a->x, b->x), min(a->y, b->y));
+		set_slot(dev, 1, true, max(a->x, b->x), max(a->y, b->y));
+	} else if (num_fingers == 1) {
+		set_slot(dev, 0, true, a->x, a->y);
+		set_slot(dev, 1, false, 0, 0);
+	} else {
+		set_slot(dev, 0, false, 0, 0);
+		set_slot(dev, 1, false, 0, 0);
+	}
 }
 
 /*
@@ -466,7 +525,8 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 	int finger_width;
 	int i;
 
-	synaptics_parse_hw_state(psmouse->packet, priv, &hw);
+	if (synaptics_parse_hw_state(psmouse->packet, priv, &hw))
+		return;
 
 	if (hw.scroll) {
 		priv->scroll += hw.scroll;
@@ -488,7 +548,7 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 		return;
 	}
 
-	if (hw.z > 0) {
+	if (hw.z > 0 && hw.x > 1) {
 		num_fingers = 1;
 		finger_width = 5;
 		if (SYN_CAP_EXTENDED(priv->capabilities)) {
@@ -512,6 +572,9 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 		finger_width = 0;
 	}
 
+	if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c))
+		synaptics_report_semi_mt_data(dev, &hw, &priv->mt, num_fingers);
+
 	/* Post events
 	 * BTN_TOUCH has to be first as mousedev relies on it when doing
 	 * absolute -> relative conversion
@@ -519,7 +582,7 @@ static void synaptics_process_packet(struct psmouse *psmouse)
 	if (hw.z > 30) input_report_key(dev, BTN_TOUCH, 1);
 	if (hw.z < 25) input_report_key(dev, BTN_TOUCH, 0);
 
-	if (hw.z > 0) {
+	if (num_fingers > 0) {
 		input_report_abs(dev, ABS_X, hw.x);
 		input_report_abs(dev, ABS_Y, YMAX_NOMINAL + YMIN_NOMINAL - hw.y);
 	}
@@ -622,6 +685,8 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 {
 	int i;
 
+	__set_bit(INPUT_PROP_POINTER, dev->propbit);
+
 	__set_bit(EV_ABS, dev->evbit);
 	input_set_abs_params(dev, ABS_X,
 			     XMIN_NOMINAL, priv->x_max ?: XMAX_NOMINAL, 0, 0);
@@ -629,6 +694,15 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 			     YMIN_NOMINAL, priv->y_max ?: YMAX_NOMINAL, 0, 0);
 	input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
 
+	if (SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) {
+		__set_bit(INPUT_PROP_SEMI_MT, dev->propbit);
+		input_mt_init_slots(dev, 2);
+		input_set_abs_params(dev, ABS_MT_POSITION_X, XMIN_NOMINAL,
+				     priv->x_max ?: XMAX_NOMINAL, 0, 0);
+		input_set_abs_params(dev, ABS_MT_POSITION_Y, YMIN_NOMINAL,
+				     priv->y_max ?: YMAX_NOMINAL, 0, 0);
+	}
+
 	if (SYN_CAP_PALMDETECT(priv->capabilities))
 		input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
 
@@ -663,6 +737,7 @@ static void set_input_params(struct input_dev *dev, struct synaptics_data *priv)
 	input_abs_set_res(dev, ABS_Y, priv->y_res);
 
 	if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+		__set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
 		/* Clickpads report only left button */
 		__clear_bit(BTN_RIGHT, dev->keybit);
 		__clear_bit(BTN_MIDDLE, dev->keybit);
@@ -702,6 +777,11 @@ static int synaptics_reconnect(struct psmouse *psmouse)
 		return -1;
 	}
 
+	if (synaptics_set_advanced_gesture_mode(psmouse)) {
+		printk(KERN_ERR "Advanced gesture mode reconnect failed.\n");
+		return -1;
+	}
+
 	return 0;
 }
 
@@ -744,15 +824,45 @@ static const struct dmi_system_id __initconst toshiba_dmi_table[] = {
 #endif
 };
 
+static bool broken_olpc_ec;
+
+static const struct dmi_system_id __initconst olpc_dmi_table[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_OLPC)
+	{
+		/* OLPC XO-1 or XO-1.5 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "OLPC"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "XO"),
+		},
+	},
+	{ }
+#endif
+};
+
 void __init synaptics_module_init(void)
 {
 	impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table);
+	broken_olpc_ec = dmi_check_system(olpc_dmi_table);
 }
 
 int synaptics_init(struct psmouse *psmouse)
 {
 	struct synaptics_data *priv;
 
+	/*
+	 * The OLPC XO has issues with Synaptics' absolute mode; similarly to
+	 * the HGPK, it quickly degrades and the hardware becomes jumpy and
+	 * overly sensitive.  Not only that, but the constant packet spew
+	 * (even at a lowered 40pps rate) overloads the EC such that key
+	 * presses on the keyboard are missed.  Given all of that, don't
+	 * even attempt to use Synaptics mode.  Relative mode seems to work
+	 * just fine.
+	 */
+	if (broken_olpc_ec) {
+		printk(KERN_INFO "synaptics: OLPC XO detected, not enabling Synaptics protocol.\n");
+		return -ENODEV;
+	}
+
 	psmouse->private = priv = kzalloc(sizeof(struct synaptics_data), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
@@ -769,6 +879,11 @@ int synaptics_init(struct psmouse *psmouse)
 		goto init_fail;
 	}
 
+	if (synaptics_set_advanced_gesture_mode(psmouse)) {
+		printk(KERN_ERR "Advanced gesture mode init failed.\n");
+		goto init_fail;
+	}
+
 	priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
 
 	printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
@@ -802,8 +917,8 @@ int synaptics_init(struct psmouse *psmouse)
 
 	/*
 	 * Toshiba's KBC seems to have trouble handling data from
-	 * Synaptics as full rate, switch to lower rate which is roughly
-	 * thye same as rate of standard PS/2 mouse.
+	 * Synaptics at full rate.  Switch to a lower rate (roughly
+	 * the same rate as a standard PS/2 mouse).
 	 */
 	if (psmouse->rate >= 80 && impaired_toshiba_kbc) {
 		printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 613a3652f98..25e5d042a72 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -51,8 +51,10 @@
 #define SYN_EXT_CAP_REQUESTS(c)		(((c) & 0x700000) >> 20)
 #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
 #define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
-#define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100100)
+#define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100000) /* 1-button ClickPad */
+#define SYN_CAP_CLICKPAD2BTN(ex0c)	((ex0c) & 0x000100) /* 2-button ClickPad */
 #define SYN_CAP_MAX_DIMENSIONS(ex0c)	((ex0c) & 0x020000)
+#define SYN_CAP_ADV_GESTURE(ex0c)	((ex0c) & 0x080000)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
@@ -112,6 +114,8 @@ struct synaptics_data {
 	int scroll;
 
 	struct serio *pt_port;			/* Pass-through serio port */
+
+	struct synaptics_hw_state mt;		/* current gesture packet */
 };
 
 void synaptics_module_init(void);
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 2a00ddf4f23..7630273e947 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -9,6 +9,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define MOUSEDEV_MINOR_BASE	32
 #define MOUSEDEV_MINORS		32
 #define MOUSEDEV_MIX		31
@@ -977,7 +979,7 @@ static int mousedev_connect(struct input_handler *handler,
 			break;
 
 	if (minor == MOUSEDEV_MINORS) {
-		printk(KERN_ERR "mousedev: no more free mousedev devices\n");
+		pr_err("no more free mousedev devices\n");
 		return -ENFILE;
 	}
 
@@ -1087,13 +1089,13 @@ static int __init mousedev_init(void)
 #ifdef CONFIG_INPUT_MOUSEDEV_PSAUX
 	error = misc_register(&psaux_mouse);
 	if (error)
-		printk(KERN_WARNING "mice: could not register psaux device, "
-			"error: %d\n", error);
+		pr_warning("could not register psaux device, error: %d\n",
+			   error);
 	else
 		psaux_registered = 1;
 #endif
 
-	printk(KERN_INFO "mice: PS/2 mouse device common for all mice\n");
+	pr_info("PS/2 mouse device common for all mice\n");
 
 	return 0;
 }
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index 6256233d2bf..bcb1fdedb59 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -214,7 +214,6 @@ config SERIO_AMS_DELTA
 	tristate "Amstrad Delta (E3) mailboard support"
 	depends on MACH_AMS_DELTA
 	default y
-	select AMS_DELTA_FIQ
 	---help---
 	  Say Y here if you have an E3 and want to use its mailboard,
 	  or any standard AT keyboard connected to the mailboard port.
diff --git a/drivers/input/serio/ams_delta_serio.c b/drivers/input/serio/ams_delta_serio.c
index 8f1770e1e08..ebe95532567 100644
--- a/drivers/input/serio/ams_delta_serio.c
+++ b/drivers/input/serio/ams_delta_serio.c
@@ -172,6 +172,5 @@ static void __exit ams_delta_serio_exit(void)
 	free_irq(OMAP_GPIO_IRQ(AMS_DELTA_GPIO_PIN_KEYBRD_CLK), 0);
 	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_CLK);
 	gpio_free(AMS_DELTA_GPIO_PIN_KEYBRD_DATA);
-	kfree(ams_delta_serio);
 }
 module_exit(ams_delta_serio_exit);
diff --git a/drivers/input/serio/ct82c710.c b/drivers/input/serio/ct82c710.c
index 4a3084695c0..448c7724beb 100644
--- a/drivers/input/serio/ct82c710.c
+++ b/drivers/input/serio/ct82c710.c
@@ -191,6 +191,9 @@ static int __devinit ct82c710_probe(struct platform_device *dev)
 
 	serio_register_port(ct82c710_port);
 
+	printk(KERN_INFO "serio: C&T 82c710 mouse port at %#llx irq %d\n",
+		(unsigned long long)CT82C710_DATA, CT82C710_IRQ);
+
 	return 0;
 }
 
@@ -237,11 +240,6 @@ static int __init ct82c710_init(void)
 	if (error)
 		goto err_free_device;
 
-	serio_register_port(ct82c710_port);
-
-	printk(KERN_INFO "serio: C&T 82c710 mouse port at %#llx irq %d\n",
-		(unsigned long long)CT82C710_DATA, CT82C710_IRQ);
-
 	return 0;
 
  err_free_device:
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 3c287dd879d..4225f5d6b15 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -358,7 +358,7 @@ static int __devinit gscps2_probe(struct parisc_device *dev)
 	gscps2_reset(ps2port);
 	ps2port->id = readb(ps2port->addr + GSC_ID) & 0x0f;
 
-	snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
+	snprintf(serio->name, sizeof(serio->name), "gsc-ps2-%s",
 		 (ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
 	strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
 	serio->id.type		= SERIO_8042;
diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
index e5624d8f170..bfd3865d886 100644
--- a/drivers/input/serio/hil_mlc.c
+++ b/drivers/input/serio/hil_mlc.c
@@ -932,6 +932,11 @@ int hil_mlc_register(hil_mlc *mlc)
 		hil_mlc_copy_di_scratch(mlc, i);
 		mlc_serio = kzalloc(sizeof(*mlc_serio), GFP_KERNEL);
 		mlc->serio[i] = mlc_serio;
+		if (!mlc->serio[i]) {
+			for (; i >= 0; i--)
+				kfree(mlc->serio[i]);
+			return -ENOMEM;
+		}
 		snprintf(mlc_serio->name, sizeof(mlc_serio->name)-1, "HIL_SERIO%d", i);
 		snprintf(mlc_serio->phys, sizeof(mlc_serio->phys)-1, "HIL%d", i);
 		mlc_serio->id			= hil_mlc_serio_id;
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index 7d2b820ef58..d50f0678bf4 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -305,6 +305,7 @@ static void hp_sdc_mlc_out(hil_mlc *mlc)
 static int __init hp_sdc_mlc_init(void)
 {
 	hil_mlc *mlc = &hp_sdc_mlc;
+	int err;
 
 #ifdef __mc68000__
 	if (!MACH_IS_HP300)
@@ -323,22 +324,21 @@ static int __init hp_sdc_mlc_init(void)
 	mlc->out = &hp_sdc_mlc_out;
 	mlc->priv = &hp_sdc_mlc_priv;
 
-	if (hil_mlc_register(mlc)) {
+	err = hil_mlc_register(mlc);
+	if (err) {
 		printk(KERN_WARNING PREFIX "Failed to register MLC structure with hil_mlc\n");
-		goto err0;
+		return err;
 	}
 
 	if (hp_sdc_request_hil_irq(&hp_sdc_mlc_isr)) {
 		printk(KERN_WARNING PREFIX "Request for raw HIL ISR hook denied\n");
-		goto err1;
+		if (hil_mlc_unregister(mlc))
+			printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
+				"This is bad.  Could cause an oops.\n");
+		return -EBUSY;
 	}
+
 	return 0;
- err1:
-	if (hil_mlc_unregister(mlc))
-		printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
-			"This is bad.  Could cause an oops.\n");
- err0:
-	return -EBUSY;
 }
 
 static void __exit hp_sdc_mlc_exit(void)
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index ed7ad7416b2..5ae0fc4578f 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -351,6 +351,17 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 		},
 	},
 	{
+		/*
+		 * Most (all?) VAIOs do not have external PS/2 ports nor
+		 * they implement active multiplexing properly, and
+		 * MUX discovery usually messes up keyboard/touchpad.
+		 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+			DMI_MATCH(DMI_BOARD_NAME, "VAIO"),
+		},
+	},
+	{
 		/* Amoi M636/A737 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."),
@@ -542,6 +553,13 @@ static const struct dmi_system_id __initconst i8042_dmi_laptop_table[] = {
  */
 static const struct dmi_system_id __initconst i8042_dmi_dritek_table[] = {
 	{
+		/* Acer Aspire 5100 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5100"),
+		},
+	},
+	{
 		/* Acer Aspire 5610 */
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
@@ -741,7 +759,7 @@ static int __init i8042_pnp_init(void)
 #endif
 
 	if (i8042_nopnp) {
-		printk(KERN_INFO "i8042: PNP detection disabled\n");
+		pr_info("PNP detection disabled\n");
 		return 0;
 	}
 
@@ -758,7 +776,7 @@ static int __init i8042_pnp_init(void)
 #if defined(__ia64__)
 		return -ENODEV;
 #else
-		printk(KERN_INFO "PNP: No PS/2 controller found. Probing ports directly.\n");
+		pr_info("PNP: No PS/2 controller found. Probing ports directly.\n");
 		return 0;
 #endif
 	}
@@ -770,7 +788,7 @@ static int __init i8042_pnp_init(void)
 		snprintf(aux_irq_str, sizeof(aux_irq_str),
 			"%d", i8042_pnp_aux_irq);
 
-	printk(KERN_INFO "PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n",
+	pr_info("PNP: PS/2 Controller [%s%s%s] at %#x,%#x irq %s%s%s\n",
 		i8042_pnp_kbd_name, (i8042_pnp_kbd_devices && i8042_pnp_aux_devices) ? "," : "",
 		i8042_pnp_aux_name,
 		i8042_pnp_data_reg, i8042_pnp_command_reg,
@@ -787,9 +805,7 @@ static int __init i8042_pnp_init(void)
 	if (((i8042_pnp_data_reg & ~0xf) == (i8042_data_reg & ~0xf) &&
 	      i8042_pnp_data_reg != i8042_data_reg) ||
 	    !i8042_pnp_data_reg) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller has invalid data port %#x; "
-			"using default %#x\n",
+		pr_warn("PNP: PS/2 controller has invalid data port %#x; using default %#x\n",
 			i8042_pnp_data_reg, i8042_data_reg);
 		i8042_pnp_data_reg = i8042_data_reg;
 		pnp_data_busted = true;
@@ -798,33 +814,27 @@ static int __init i8042_pnp_init(void)
 	if (((i8042_pnp_command_reg & ~0xf) == (i8042_command_reg & ~0xf) &&
 	      i8042_pnp_command_reg != i8042_command_reg) ||
 	    !i8042_pnp_command_reg) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller has invalid command port %#x; "
-			"using default %#x\n",
+		pr_warn("PNP: PS/2 controller has invalid command port %#x; using default %#x\n",
 			i8042_pnp_command_reg, i8042_command_reg);
 		i8042_pnp_command_reg = i8042_command_reg;
 		pnp_data_busted = true;
 	}
 
 	if (!i8042_nokbd && !i8042_pnp_kbd_irq) {
-		printk(KERN_WARNING
-			"PNP: PS/2 controller doesn't have KBD irq; "
-			"using default %d\n", i8042_kbd_irq);
+		pr_warn("PNP: PS/2 controller doesn't have KBD irq; using default %d\n",
+			i8042_kbd_irq);
 		i8042_pnp_kbd_irq = i8042_kbd_irq;
 		pnp_data_busted = true;
 	}
 
 	if (!i8042_noaux && !i8042_pnp_aux_irq) {
 		if (!pnp_data_busted && i8042_pnp_kbd_irq) {
-			printk(KERN_WARNING
-				"PNP: PS/2 appears to have AUX port disabled, "
-				"if this is incorrect please boot with "
-				"i8042.nopnp\n");
+			pr_warn("PNP: PS/2 appears to have AUX port disabled, "
+				"if this is incorrect please boot with i8042.nopnp\n");
 			i8042_noaux = true;
 		} else {
-			printk(KERN_WARNING
-				"PNP: PS/2 controller doesn't have AUX irq; "
-				"using default %d\n", i8042_aux_irq);
+			pr_warn("PNP: PS/2 controller doesn't have AUX irq; using default %d\n",
+				i8042_aux_irq);
 			i8042_pnp_aux_irq = i8042_aux_irq;
 		}
 	}
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 18db5a8c747..c04ff00a366 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -10,6 +10,8 @@
  * the Free Software Foundation.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/types.h>
 #include <linux/delay.h>
 #include <linux/module.h>
@@ -225,8 +227,8 @@ static int i8042_flush(void)
 		udelay(50);
 		data = i8042_read_data();
 		i++;
-		dbg("%02x <- i8042 (flush, %s)", data,
-			str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (flush, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 	}
 
 	spin_unlock_irqrestore(&i8042_lock, flags);
@@ -253,32 +255,32 @@ static int __i8042_command(unsigned char *param, int command)
 	if (error)
 		return error;
 
-	dbg("%02x -> i8042 (command)", command & 0xff);
+	dbg("%02x -> i8042 (command)\n", command & 0xff);
 	i8042_write_command(command & 0xff);
 
 	for (i = 0; i < ((command >> 12) & 0xf); i++) {
 		error = i8042_wait_write();
 		if (error)
 			return error;
-		dbg("%02x -> i8042 (parameter)", param[i]);
+		dbg("%02x -> i8042 (parameter)\n", param[i]);
 		i8042_write_data(param[i]);
 	}
 
 	for (i = 0; i < ((command >> 8) & 0xf); i++) {
 		error = i8042_wait_read();
 		if (error) {
-			dbg("     -- i8042 (timeout)");
+			dbg("     -- i8042 (timeout)\n");
 			return error;
 		}
 
 		if (command == I8042_CMD_AUX_LOOP &&
 		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
-			dbg("     -- i8042 (auxerr)");
+			dbg("     -- i8042 (auxerr)\n");
 			return -1;
 		}
 
 		param[i] = i8042_read_data();
-		dbg("%02x <- i8042 (return)", param[i]);
+		dbg("%02x <- i8042 (return)\n", param[i]);
 	}
 
 	return 0;
@@ -309,7 +311,7 @@ static int i8042_kbd_write(struct serio *port, unsigned char c)
 	spin_lock_irqsave(&i8042_lock, flags);
 
 	if (!(retval = i8042_wait_write())) {
-		dbg("%02x -> i8042 (kbd-data)", c);
+		dbg("%02x -> i8042 (kbd-data)\n", c);
 		i8042_write_data(c);
 	}
 
@@ -355,17 +357,14 @@ static void i8042_port_close(struct serio *serio)
 
 	i8042_ctr &= ~irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING
-			"i8042.c: Can't write CTR while closing %s port.\n",
-			port_name);
+		pr_warn("Can't write CTR while closing %s port\n", port_name);
 
 	udelay(50);
 
 	i8042_ctr &= ~disable_bit;
 	i8042_ctr |= irq_bit;
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_ERR "i8042.c: Can't reactivate %s port.\n",
-			port_name);
+		pr_err("Can't reactivate %s port\n", port_name);
 
 	/*
 	 * See if there is any data appeared while we were messing with
@@ -456,7 +455,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (unlikely(~str & I8042_STR_OBF)) {
 		spin_unlock_irqrestore(&i8042_lock, flags);
-		if (irq) dbg("Interrupt %d, without any data", irq);
+		if (irq)
+			dbg("Interrupt %d, without any data\n", irq);
 		ret = 0;
 		goto out;
 	}
@@ -469,7 +469,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 
 		dfl = 0;
 		if (str & I8042_STR_MUXERR) {
-			dbg("MUX error, status is %02x, data is %02x", str, data);
+			dbg("MUX error, status is %02x, data is %02x\n",
+			    str, data);
 /*
  * When MUXERR condition is signalled the data register can only contain
  * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
@@ -512,7 +513,7 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
 	port = &i8042_ports[port_no];
 	serio = port->exists ? port->serio : NULL;
 
-	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
+	dbg("%02x <- i8042 (interrupt, %d, %d%s%s)\n",
 	    data, port_no, irq,
 	    dfl & SERIO_PARITY ? ", bad parity" : "",
 	    dfl & SERIO_TIMEOUT ? ", timeout" : "");
@@ -540,7 +541,7 @@ static int i8042_enable_kbd_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_KBDINT;
 		i8042_ctr |= I8042_CTR_KBDDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable KBD port.\n");
+		pr_err("Failed to enable KBD port\n");
 		return -EIO;
 	}
 
@@ -559,7 +560,7 @@ static int i8042_enable_aux_port(void)
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
 		i8042_ctr &= ~I8042_CTR_AUXINT;
 		i8042_ctr |= I8042_CTR_AUXDIS;
-		printk(KERN_ERR "i8042.c: Failed to enable AUX port.\n");
+		pr_err("Failed to enable AUX port\n");
 		return -EIO;
 	}
 
@@ -641,7 +642,7 @@ static int __init i8042_check_mux(void)
 	if (i8042_set_mux_mode(true, &mux_version))
 		return -1;
 
-	printk(KERN_INFO "i8042.c: Detected active multiplexing controller, rev %d.%d.\n",
+	pr_info("Detected active multiplexing controller, rev %d.%d\n",
 		(mux_version >> 4) & 0xf, mux_version & 0xf);
 
 /*
@@ -651,7 +652,7 @@ static int __init i8042_check_mux(void)
 	i8042_ctr &= ~I8042_CTR_AUXINT;
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Failed to disable AUX port, can't use MUX.\n");
+		pr_err("Failed to disable AUX port, can't use MUX\n");
 		return -EIO;
 	}
 
@@ -676,8 +677,8 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (str & I8042_STR_OBF) {
 		data = i8042_read_data();
-		dbg("%02x <- i8042 (aux_test_irq, %s)",
-			data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
+		dbg("%02x <- i8042 (aux_test_irq, %s)\n",
+		    data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 		if (i8042_irq_being_tested &&
 		    data == 0xa5 && (str & I8042_STR_AUXDATA))
 			complete(&i8042_aux_irq_delivered);
@@ -770,8 +771,8 @@ static int __init i8042_check_aux(void)
  */
 
 	if (i8042_toggle_aux(false)) {
-		printk(KERN_WARNING "Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
-		printk(KERN_WARNING "If AUX port is really absent please use the 'i8042.noaux' option.\n");
+		pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");
+		pr_warn("If AUX port is really absent please use the 'i8042.noaux' option\n");
 	}
 
 	if (i8042_toggle_aux(true))
@@ -819,7 +820,7 @@ static int __init i8042_check_aux(void)
  * AUX IRQ was never delivered so we need to flush the controller to
  * get rid of the byte we put there; otherwise keyboard may not work.
  */
-		dbg("     -- i8042 (aux irq test timeout)");
+		dbg("     -- i8042 (aux irq test timeout)\n");
 		i8042_flush();
 		retval = -1;
 	}
@@ -845,7 +846,7 @@ static int __init i8042_check_aux(void)
 static int i8042_controller_check(void)
 {
 	if (i8042_flush() == I8042_BUFFER_SIZE) {
-		printk(KERN_ERR "i8042.c: No controller found.\n");
+		pr_err("No controller found\n");
 		return -ENODEV;
 	}
 
@@ -864,15 +865,15 @@ static int i8042_controller_selftest(void)
 	do {
 
 		if (i8042_command(&param, I8042_CMD_CTL_TEST)) {
-			printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+			pr_err("i8042 controller self test timeout\n");
 			return -ENODEV;
 		}
 
 		if (param == I8042_RET_CTL_TEST)
 			return 0;
 
-		printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
-			param, I8042_RET_CTL_TEST);
+		pr_err("i8042 controller selftest failed. (%#x != %#x)\n",
+		       param, I8042_RET_CTL_TEST);
 		msleep(50);
 	} while (i++ < 5);
 
@@ -883,8 +884,7 @@ static int i8042_controller_selftest(void)
 	 * and user will still get a working keyboard. This is especially
 	 * important on netbooks. On other arches we trust hardware more.
 	 */
-	printk(KERN_INFO
-		"i8042: giving up on controller selftest, continuing anyway...\n");
+	pr_info("giving up on controller selftest, continuing anyway...\n");
 	return 0;
 #else
 	return -EIO;
@@ -909,8 +909,7 @@ static int i8042_controller_init(void)
 
 	do {
 		if (n >= 10) {
-			printk(KERN_ERR
-				"i8042.c: Unable to get stable CTR read.\n");
+			pr_err("Unable to get stable CTR read\n");
 			return -EIO;
 		}
 
@@ -918,8 +917,7 @@ static int i8042_controller_init(void)
 			udelay(50);
 
 		if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
-			printk(KERN_ERR
-				"i8042.c: Can't read CTR while initializing i8042.\n");
+			pr_err("Can't read CTR while initializing i8042\n");
 			return -EIO;
 		}
 
@@ -943,7 +941,7 @@ static int i8042_controller_init(void)
 		if (i8042_unlock)
 			i8042_ctr |= I8042_CTR_IGNKEYLOCK;
 		else
-			printk(KERN_WARNING "i8042.c: Warning: Keylock active.\n");
+			pr_warn("Warning: Keylock active\n");
 	}
 	spin_unlock_irqrestore(&i8042_lock, flags);
 
@@ -970,7 +968,7 @@ static int i8042_controller_init(void)
  */
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_ERR "i8042.c: Can't write CTR while initializing i8042.\n");
+		pr_err("Can't write CTR while initializing i8042\n");
 		return -EIO;
 	}
 
@@ -1000,7 +998,7 @@ static void i8042_controller_reset(void)
 	i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
 
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
+		pr_warn("Can't write CTR while resetting\n");
 
 /*
  * Disable MUX mode if present.
@@ -1021,7 +1019,7 @@ static void i8042_controller_reset(void)
  */
 
 	if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
-		printk(KERN_WARNING "i8042.c: Can't restore CTR.\n");
+		pr_warn("Can't restore CTR\n");
 }
 
 
@@ -1045,14 +1043,14 @@ static long i8042_panic_blink(int state)
 	led = (state) ? 0x01 | 0x04 : 0;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
-	dbg("%02x -> i8042 (panic blink)", 0xed);
+	dbg("%02x -> i8042 (panic blink)\n", 0xed);
 	i8042_suppress_kbd_ack = 2;
 	i8042_write_data(0xed); /* set leds */
 	DELAY;
 	while (i8042_read_status() & I8042_STR_IBF)
 		DELAY;
 	DELAY;
-	dbg("%02x -> i8042 (panic blink)", led);
+	dbg("%02x -> i8042 (panic blink)\n", led);
 	i8042_write_data(led);
 	DELAY;
 	return delay;
@@ -1068,9 +1066,7 @@ static void i8042_dritek_enable(void)
 
 	error = i8042_command(&param, 0x1059);
 	if (error)
-		printk(KERN_WARNING
-			"Failed to enable DRITEK extension: %d\n",
-			error);
+		pr_warn("Failed to enable DRITEK extension: %d\n", error);
 }
 #endif
 
@@ -1105,10 +1101,10 @@ static int i8042_controller_resume(bool force_reset)
 	i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS;
 	i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT);
 	if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-		printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n");
+		pr_warn("Can't write CTR to resume, retrying...\n");
 		msleep(50);
 		if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) {
-			printk(KERN_ERR "i8042: CTR write retry failed\n");
+			pr_err("CTR write retry failed\n");
 			return -EIO;
 		}
 	}
@@ -1121,9 +1117,7 @@ static int i8042_controller_resume(bool force_reset)
 
 	if (i8042_mux_present) {
 		if (i8042_set_mux_mode(true, NULL) || i8042_enable_mux_ports())
-			printk(KERN_WARNING
-				"i8042: failed to resume active multiplexor, "
-				"mouse won't work.\n");
+			pr_warn("failed to resume active multiplexor, mouse won't work\n");
 	} else if (i8042_ports[I8042_AUX_PORT_NO].serio)
 		i8042_enable_aux_port();
 
diff --git a/drivers/input/serio/i8042.h b/drivers/input/serio/i8042.h
index cbc1beb6657..ac1d759d0f5 100644
--- a/drivers/input/serio/i8042.h
+++ b/drivers/input/serio/i8042.h
@@ -89,15 +89,19 @@
 #ifdef DEBUG
 static unsigned long i8042_start_time;
 #define dbg_init() do { i8042_start_time = jiffies; } while (0)
-#define dbg(format, arg...) 							\
-	do { 									\
+#define dbg(format, arg...)							\
+	do {									\
 		if (i8042_debug)						\
-			printk(KERN_DEBUG __FILE__ ": " format " [%d]\n" ,	\
-	 			## arg, (int) (jiffies - i8042_start_time));	\
+			printk(KERN_DEBUG KBUILD_MODNAME ": [%d] " format,	\
+			       (int) (jiffies - i8042_start_time), ##arg);	\
 	} while (0)
 #else
 #define dbg_init() do { } while (0)
-#define dbg(format, arg...) do {} while (0)
+#define dbg(format, arg...)							\
+	do {									\
+		if (0)								\
+			printk(KERN_DEBUG pr_fmt(format), ##arg);		\
+	} while (0)
 #endif
 
 #endif /* _I8042_H */
diff --git a/drivers/input/serio/ps2mult.c b/drivers/input/serio/ps2mult.c
index 6bce22e4e49..15aa81c9f1f 100644
--- a/drivers/input/serio/ps2mult.c
+++ b/drivers/input/serio/ps2mult.c
@@ -207,7 +207,7 @@ static int ps2mult_connect(struct serio *serio, struct serio_driver *drv)
 err_out:
 	while (--i >= 0)
 		kfree(psm->ports[i].serio);
-	kfree(serio);
+	kfree(psm);
 	return error;
 }
 
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index 405bf214527..db5b0bca1a1 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -32,10 +32,9 @@
 #include <linux/module.h>
 #include <linux/serio.h>
 #include <linux/errno.h>
-#include <linux/wait.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/kthread.h>
+#include <linux/workqueue.h>
 #include <linux/mutex.h>
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
@@ -44,7 +43,7 @@ MODULE_LICENSE("GPL");
 
 /*
  * serio_mutex protects entire serio subsystem and is taken every time
- * serio port or driver registrered or unregistered.
+ * serio port or driver registered or unregistered.
  */
 static DEFINE_MUTEX(serio_mutex);
 
@@ -165,58 +164,22 @@ struct serio_event {
 
 static DEFINE_SPINLOCK(serio_event_lock);	/* protects serio_event_list */
 static LIST_HEAD(serio_event_list);
-static DECLARE_WAIT_QUEUE_HEAD(serio_wait);
-static struct task_struct *serio_task;
 
-static int serio_queue_event(void *object, struct module *owner,
-			     enum serio_event_type event_type)
+static struct serio_event *serio_get_event(void)
 {
+	struct serio_event *event = NULL;
 	unsigned long flags;
-	struct serio_event *event;
-	int retval = 0;
 
 	spin_lock_irqsave(&serio_event_lock, flags);
 
-	/*
-	 * Scan event list for the other events for the same serio port,
-	 * starting with the most recent one. If event is the same we
-	 * do not need add new one. If event is of different type we
-	 * need to add this event and should not look further because
-	 * we need to preseve sequence of distinct events.
-	 */
-	list_for_each_entry_reverse(event, &serio_event_list, node) {
-		if (event->object == object) {
-			if (event->type == event_type)
-				goto out;
-			break;
-		}
-	}
-
-	event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC);
-	if (!event) {
-		pr_err("Not enough memory to queue event %d\n", event_type);
-		retval = -ENOMEM;
-		goto out;
-	}
-
-	if (!try_module_get(owner)) {
-		pr_warning("Can't get module reference, dropping event %d\n",
-			   event_type);
-		kfree(event);
-		retval = -EINVAL;
-		goto out;
+	if (!list_empty(&serio_event_list)) {
+		event = list_first_entry(&serio_event_list,
+					 struct serio_event, node);
+		list_del_init(&event->node);
 	}
 
-	event->type = event_type;
-	event->object = object;
-	event->owner = owner;
-
-	list_add_tail(&event->node, &serio_event_list);
-	wake_up(&serio_wait);
-
-out:
 	spin_unlock_irqrestore(&serio_event_lock, flags);
-	return retval;
+	return event;
 }
 
 static void serio_free_event(struct serio_event *event)
@@ -250,25 +213,7 @@ static void serio_remove_duplicate_events(struct serio_event *event)
 	spin_unlock_irqrestore(&serio_event_lock, flags);
 }
 
-
-static struct serio_event *serio_get_event(void)
-{
-	struct serio_event *event = NULL;
-	unsigned long flags;
-
-	spin_lock_irqsave(&serio_event_lock, flags);
-
-	if (!list_empty(&serio_event_list)) {
-		event = list_first_entry(&serio_event_list,
-					 struct serio_event, node);
-		list_del_init(&event->node);
-	}
-
-	spin_unlock_irqrestore(&serio_event_lock, flags);
-	return event;
-}
-
-static void serio_handle_event(void)
+static void serio_handle_event(struct work_struct *work)
 {
 	struct serio_event *event;
 
@@ -307,6 +252,59 @@ static void serio_handle_event(void)
 	mutex_unlock(&serio_mutex);
 }
 
+static DECLARE_WORK(serio_event_work, serio_handle_event);
+
+static int serio_queue_event(void *object, struct module *owner,
+			     enum serio_event_type event_type)
+{
+	unsigned long flags;
+	struct serio_event *event;
+	int retval = 0;
+
+	spin_lock_irqsave(&serio_event_lock, flags);
+
+	/*
+	 * Scan event list for the other events for the same serio port,
+	 * starting with the most recent one. If event is the same we
+	 * do not need add new one. If event is of different type we
+	 * need to add this event and should not look further because
+	 * we need to preseve sequence of distinct events.
+	 */
+	list_for_each_entry_reverse(event, &serio_event_list, node) {
+		if (event->object == object) {
+			if (event->type == event_type)
+				goto out;
+			break;
+		}
+	}
+
+	event = kmalloc(sizeof(struct serio_event), GFP_ATOMIC);
+	if (!event) {
+		pr_err("Not enough memory to queue event %d\n", event_type);
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	if (!try_module_get(owner)) {
+		pr_warning("Can't get module reference, dropping event %d\n",
+			   event_type);
+		kfree(event);
+		retval = -EINVAL;
+		goto out;
+	}
+
+	event->type = event_type;
+	event->object = object;
+	event->owner = owner;
+
+	list_add_tail(&event->node, &serio_event_list);
+	schedule_work(&serio_event_work);
+
+out:
+	spin_unlock_irqrestore(&serio_event_lock, flags);
+	return retval;
+}
+
 /*
  * Remove all events that have been submitted for a given
  * object, be it serio port or driver.
@@ -356,18 +354,6 @@ static struct serio *serio_get_pending_child(struct serio *parent)
 	return child;
 }
 
-static int serio_thread(void *nothing)
-{
-	do {
-		serio_handle_event();
-		wait_event_interruptible(serio_wait,
-			kthread_should_stop() || !list_empty(&serio_event_list));
-	} while (!kthread_should_stop());
-
-	return 0;
-}
-
-
 /*
  * Serio port operations
  */
@@ -1040,21 +1026,18 @@ static int __init serio_init(void)
 		return error;
 	}
 
-	serio_task = kthread_run(serio_thread, NULL, "kseriod");
-	if (IS_ERR(serio_task)) {
-		bus_unregister(&serio_bus);
-		error = PTR_ERR(serio_task);
-		pr_err("Failed to start kseriod, error: %d\n", error);
-		return error;
-	}
-
 	return 0;
 }
 
 static void __exit serio_exit(void)
 {
 	bus_unregister(&serio_bus);
-	kthread_stop(serio_task);
+
+	/*
+	 * There should not be any outstanding events but work may
+	 * still be scheduled so simply cancel it.
+	 */
+	cancel_work_sync(&serio_event_work);
 }
 
 subsys_initcall(serio_init);
diff --git a/drivers/input/serio/serio_raw.c b/drivers/input/serio/serio_raw.c
index cd82bb12591..b7ba4597f7f 100644
--- a/drivers/input/serio/serio_raw.c
+++ b/drivers/input/serio/serio_raw.c
@@ -11,7 +11,6 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/module.h>
 #include <linux/serio.h>
diff --git a/drivers/input/tablet/acecad.c b/drivers/input/tablet/acecad.c
index aea9a9399a3..d94f7e9aa99 100644
--- a/drivers/input/tablet/acecad.c
+++ b/drivers/input/tablet/acecad.c
@@ -229,12 +229,13 @@ static int usb_acecad_probe(struct usb_interface *intf, const struct usb_device_
 
 	err = input_register_device(acecad->input);
 	if (err)
-		goto fail2;
+		goto fail3;
 
 	usb_set_intfdata(intf, acecad);
 
 	return 0;
 
+ fail3:	usb_free_urb(acecad->irq);
  fail2:	usb_free_coherent(dev, 8, acecad->data, acecad->data_dma);
  fail1: input_free_device(input_dev);
 	kfree(acecad);
diff --git a/drivers/input/tablet/aiptek.c b/drivers/input/tablet/aiptek.c
index 57b25b84d1f..0a619c558bf 100644
--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1097,7 +1097,7 @@ store_tabletPointerMode(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(pointer_mode,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletPointerMode, store_tabletPointerMode);
 
 /***********************************************************************
@@ -1134,7 +1134,7 @@ store_tabletCoordinateMode(struct device *dev, struct device_attribute *attr, co
 }
 
 static DEVICE_ATTR(coordinate_mode,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletCoordinateMode, store_tabletCoordinateMode);
 
 /***********************************************************************
@@ -1176,7 +1176,7 @@ store_tabletToolMode(struct device *dev, struct device_attribute *attr, const ch
 }
 
 static DEVICE_ATTR(tool_mode,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletToolMode, store_tabletToolMode);
 
 /***********************************************************************
@@ -1219,7 +1219,7 @@ store_tabletXtilt(struct device *dev, struct device_attribute *attr, const char
 }
 
 static DEVICE_ATTR(xtilt,
-		   S_IRUGO | S_IWUGO, show_tabletXtilt, store_tabletXtilt);
+		   S_IRUGO | S_IWUSR, show_tabletXtilt, store_tabletXtilt);
 
 /***********************************************************************
  * support routines for the 'ytilt' file. Note that this file
@@ -1261,7 +1261,7 @@ store_tabletYtilt(struct device *dev, struct device_attribute *attr, const char
 }
 
 static DEVICE_ATTR(ytilt,
-		   S_IRUGO | S_IWUGO, show_tabletYtilt, store_tabletYtilt);
+		   S_IRUGO | S_IWUSR, show_tabletYtilt, store_tabletYtilt);
 
 /***********************************************************************
  * support routines for the 'jitter' file. Note that this file
@@ -1288,7 +1288,7 @@ store_tabletJitterDelay(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(jitter,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletJitterDelay, store_tabletJitterDelay);
 
 /***********************************************************************
@@ -1317,7 +1317,7 @@ store_tabletProgrammableDelay(struct device *dev, struct device_attribute *attr,
 }
 
 static DEVICE_ATTR(delay,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletProgrammableDelay, store_tabletProgrammableDelay);
 
 /***********************************************************************
@@ -1406,7 +1406,7 @@ store_tabletStylusUpper(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(stylus_upper,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletStylusUpper, store_tabletStylusUpper);
 
 /***********************************************************************
@@ -1437,7 +1437,7 @@ store_tabletStylusLower(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(stylus_lower,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletStylusLower, store_tabletStylusLower);
 
 /***********************************************************************
@@ -1475,7 +1475,7 @@ store_tabletMouseLeft(struct device *dev, struct device_attribute *attr, const c
 }
 
 static DEVICE_ATTR(mouse_left,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletMouseLeft, store_tabletMouseLeft);
 
 /***********************************************************************
@@ -1505,7 +1505,7 @@ store_tabletMouseMiddle(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(mouse_middle,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletMouseMiddle, store_tabletMouseMiddle);
 
 /***********************************************************************
@@ -1535,7 +1535,7 @@ store_tabletMouseRight(struct device *dev, struct device_attribute *attr, const
 }
 
 static DEVICE_ATTR(mouse_right,
-		   S_IRUGO | S_IWUGO,
+		   S_IRUGO | S_IWUSR,
 		   show_tabletMouseRight, store_tabletMouseRight);
 
 /***********************************************************************
@@ -1567,7 +1567,7 @@ store_tabletWheel(struct device *dev, struct device_attribute *attr, const char
 }
 
 static DEVICE_ATTR(wheel,
-		   S_IRUGO | S_IWUGO, show_tabletWheel, store_tabletWheel);
+		   S_IRUGO | S_IWUSR, show_tabletWheel, store_tabletWheel);
 
 /***********************************************************************
  * support routines for the 'execute' file. Note that this file
@@ -1600,7 +1600,7 @@ store_tabletExecute(struct device *dev, struct device_attribute *attr, const cha
 }
 
 static DEVICE_ATTR(execute,
-		   S_IRUGO | S_IWUGO, show_tabletExecute, store_tabletExecute);
+		   S_IRUGO | S_IWUSR, show_tabletExecute, store_tabletExecute);
 
 /***********************************************************************
  * support routines for the 'odm_code' file. Note that this file
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index de5adb10903..23317bd09c8 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -103,6 +103,7 @@ MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE(DRIVER_LICENSE);
 
 #define USB_VENDOR_ID_WACOM	0x056a
+#define USB_VENDOR_ID_LENOVO	0x17ef
 
 struct wacom {
 	dma_addr_t data_dma;
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index b3252ef1e27..518782999fe 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -14,6 +14,7 @@
 
 #include "wacom_wac.h"
 #include "wacom.h"
+#include <linux/input/mt.h>
 
 static int wacom_penpartner_irq(struct wacom_wac *wacom)
 {
@@ -862,19 +863,21 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
 	struct wacom_features *features = &wacom->features;
 	struct input_dev *input = wacom->input;
 	unsigned char *data = wacom->data;
-	int sp = 0, sx = 0, sy = 0, count = 0;
 	int i;
 
 	for (i = 0; i < 2; i++) {
 		int p = data[9 * i + 2];
+		bool touch = p && !wacom->shared->stylus_in_proximity;
+
 		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
 		/*
 		 * Touch events need to be disabled while stylus is
 		 * in proximity because user's hand is resting on touchpad
 		 * and sending unwanted events.  User expects tablet buttons
 		 * to continue working though.
 		 */
-		if (p && !wacom->shared->stylus_in_proximity) {
+		if (touch) {
 			int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff;
 			int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff;
 			if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
@@ -884,23 +887,10 @@ static int wacom_bpt_touch(struct wacom_wac *wacom)
 			input_report_abs(input, ABS_MT_PRESSURE, p);
 			input_report_abs(input, ABS_MT_POSITION_X, x);
 			input_report_abs(input, ABS_MT_POSITION_Y, y);
-			if (wacom->id[i] < 0)
-				wacom->id[i] = wacom->trk_id++ & MAX_TRACKING_ID;
-			if (!count++)
-				sp = p, sx = x, sy = y;
-		} else {
-			wacom->id[i] = -1;
 		}
-		input_report_abs(input, ABS_MT_TRACKING_ID, wacom->id[i]);
 	}
 
-	input_report_key(input, BTN_TOUCH, count > 0);
-	input_report_key(input, BTN_TOOL_FINGER, count == 1);
-	input_report_key(input, BTN_TOOL_DOUBLETAP, count == 2);
-
-	input_report_abs(input, ABS_PRESSURE, sp);
-	input_report_abs(input, ABS_X, sx);
-	input_report_abs(input, ABS_Y, sy);
+	input_mt_report_pointer_emulation(input, true);
 
 	input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
 	input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
@@ -1272,7 +1262,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 			__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 			__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
 
-			input_mt_create_slots(input_dev, 2);
+			input_mt_init_slots(input_dev, 2);
 			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
 					     0, features->x_max,
 					     features->x_fuzz, 0);
@@ -1282,8 +1272,6 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
 			input_set_abs_params(input_dev, ABS_MT_PRESSURE,
 					     0, features->pressure_max,
 					     features->pressure_fuzz, 0);
-			input_set_abs_params(input_dev, ABS_MT_TRACKING_ID, 0,
-					     MAX_TRACKING_ID, 0, 0);
 		} else if (features->device_type == BTN_TOOL_PEN) {
 			__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
 			__set_bit(BTN_TOOL_PEN, input_dev->keybit);
@@ -1436,11 +1424,25 @@ static struct wacom_features wacom_features_0xD2 =
 	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
 static struct wacom_features wacom_features_0xD3 =
 	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13530, 1023, 63, BAMBOO_PT };
+static const struct wacom_features wacom_features_0xD4 =
+	{ "Wacom Bamboo Pen",     WACOM_PKGLEN_BBFUN,     14720,  9200,  255, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD8 =
+	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDA =
+	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDB =
+	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13530, 1023, 63, BAMBOO_PT };
+static const struct wacom_features wacom_features_0x6004 =
+	{ "ISD-V4",               WACOM_PKGLEN_GRAPHIRE,  12800, 8000, 255, 0, TABLETPC };
 
 #define USB_DEVICE_WACOM(prod)					\
 	USB_DEVICE(USB_VENDOR_ID_WACOM, prod),			\
 	.driver_info = (kernel_ulong_t)&wacom_features_##prod
 
+#define USB_DEVICE_LENOVO(prod)					\
+	USB_DEVICE(USB_VENDOR_ID_LENOVO, prod),			\
+	.driver_info = (kernel_ulong_t)&wacom_features_##prod
+
 const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0x00) },
 	{ USB_DEVICE_WACOM(0x10) },
@@ -1504,6 +1506,10 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xD1) },
 	{ USB_DEVICE_WACOM(0xD2) },
 	{ USB_DEVICE_WACOM(0xD3) },
+	{ USB_DEVICE_WACOM(0xD4) },
+	{ USB_DEVICE_WACOM(0xD8) },
+	{ USB_DEVICE_WACOM(0xDA) },
+	{ USB_DEVICE_WACOM(0xDB) },
 	{ USB_DEVICE_WACOM(0xF0) },
 	{ USB_DEVICE_WACOM(0xCC) },
 	{ USB_DEVICE_WACOM(0x90) },
@@ -1513,6 +1519,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xE2) },
 	{ USB_DEVICE_WACOM(0xE3) },
 	{ USB_DEVICE_WACOM(0x47) },
+	{ USB_DEVICE_LENOVO(0x6004) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, wacom_ids);
diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h
index 00ca01541d8..b1310ec9720 100644
--- a/drivers/input/tablet/wacom_wac.h
+++ b/drivers/input/tablet/wacom_wac.h
@@ -42,9 +42,6 @@
 #define WACOM_QUIRK_MULTI_INPUT		0x0001
 #define WACOM_QUIRK_BBTOUCH_LOWRES	0x0002
 
-/* largest reported tracking id */
-#define MAX_TRACKING_ID			0xfff
-
 enum {
 	PENPARTNER = 0,
 	GRAPHIRE,
@@ -100,7 +97,6 @@ struct wacom_wac {
 	int id[3];
 	__u32 serial[2];
 	int last_finger;
-	int trk_id;
 	struct wacom_features features;
 	struct wacom_shared *shared;
 	struct input_dev *input;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 06ea8da95c6..07ac77d393a 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -659,17 +659,17 @@ config TOUCHSCREEN_PCAP
 	  To compile this driver as a module, choose M here: the
 	  module will be called pcap_ts.
 
-config TOUCHSCREEN_TPS6507X
-	tristate "TPS6507x based touchscreens"
+config TOUCHSCREEN_ST1232
+	tristate "Sitronix ST1232 touchscreen controllers"
 	depends on I2C
 	help
-	  Say Y here if you have a TPS6507x based touchscreen
-	  controller.
+	  Say Y here if you want to support Sitronix ST1232
+	  touchscreen controller.
 
 	  If unsure, say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called tps6507x_ts.
+	  module will be called st1232_ts.
 
 config TOUCHSCREEN_STMPE
 	tristate "STMicroelectronics STMPE touchscreens"
@@ -681,4 +681,16 @@ config TOUCHSCREEN_STMPE
 	  To compile this driver as a module, choose M here: the
 	  module will be called stmpe-ts.
 
+config TOUCHSCREEN_TPS6507X
+	tristate "TPS6507x based touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a TPS6507x based touchscreen
+	  controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tps6507x_ts.
+
 endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 7cc1b4f4b67..718bcc81495 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
 obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
 obj-$(CONFIG_TOUCHSCREEN_QT602240)	+= qt602240_ts.o
 obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
+obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
 obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TNETV107X)	+= tnetv107x-ts.o
 obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
index 2ca9e5d6646..f7fa9ef4cd6 100644
--- a/drivers/input/touchscreen/bu21013_ts.c
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -365,7 +365,7 @@ static int bu21013_init_chip(struct bu21013_ts_data *data)
 	}
 
 	retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_OFF_REG,
-				BU21013_TH_OFF_4 || BU21013_TH_OFF_3);
+				BU21013_TH_OFF_4 | BU21013_TH_OFF_3);
 	if (retval < 0) {
 		dev_err(&i2c->dev, "BU21013_TH_OFF reg write failed\n");
 		return retval;
diff --git a/drivers/input/touchscreen/qt602240_ts.c b/drivers/input/touchscreen/qt602240_ts.c
index 66b26ad3032..4dcb0e872f6 100644
--- a/drivers/input/touchscreen/qt602240_ts.c
+++ b/drivers/input/touchscreen/qt602240_ts.c
@@ -969,7 +969,7 @@ static int qt602240_initialize(struct qt602240_data *data)
 		return error;
 
 	data->object_table = kcalloc(info->object_num,
-				     sizeof(struct qt602240_data),
+				     sizeof(struct qt602240_object),
 				     GFP_KERNEL);
 	if (!data->object_table) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
@@ -1324,8 +1324,9 @@ static int __devexit qt602240_remove(struct i2c_client *client)
 }
 
 #ifdef CONFIG_PM
-static int qt602240_suspend(struct i2c_client *client, pm_message_t mesg)
+static int qt602240_suspend(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct qt602240_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
@@ -1339,8 +1340,9 @@ static int qt602240_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int qt602240_resume(struct i2c_client *client)
+static int qt602240_resume(struct device *dev)
 {
+	struct i2c_client *client = to_i2c_client(dev);
 	struct qt602240_data *data = i2c_get_clientdata(client);
 	struct input_dev *input_dev = data->input_dev;
 
@@ -1359,9 +1361,11 @@ static int qt602240_resume(struct i2c_client *client)
 
 	return 0;
 }
-#else
-#define qt602240_suspend	NULL
-#define qt602240_resume		NULL
+
+static const struct dev_pm_ops qt602240_pm_ops = {
+	.suspend	= qt602240_suspend,
+	.resume		= qt602240_resume,
+};
 #endif
 
 static const struct i2c_device_id qt602240_id[] = {
@@ -1374,11 +1378,12 @@ static struct i2c_driver qt602240_driver = {
 	.driver = {
 		.name	= "qt602240_ts",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &qt602240_pm_ops,
+#endif
 	},
 	.probe		= qt602240_probe,
 	.remove		= __devexit_p(qt602240_remove),
-	.suspend	= qt602240_suspend,
-	.resume		= qt602240_resume,
 	.id_table	= qt602240_id,
 };
 
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
new file mode 100644
index 00000000000..4ab371358b3
--- /dev/null
+++ b/drivers/input/touchscreen/st1232.c
@@ -0,0 +1,274 @@
+/*
+ * ST1232 Touchscreen Controller Driver
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *	Tony SIM <chinyeow.sim.xt@renesas.com>
+ *
+ * Using code from:
+ *  - android.git.kernel.org: projects/kernel/common.git: synaptics_i2c_rmi.c
+ *	Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define ST1232_TS_NAME	"st1232-ts"
+
+#define MIN_X		0x00
+#define MIN_Y		0x00
+#define MAX_X		0x31f	/* (800 - 1) */
+#define MAX_Y		0x1df	/* (480 - 1) */
+#define MAX_AREA	0xff
+#define MAX_FINGERS	2
+
+struct st1232_ts_finger {
+	u16 x;
+	u16 y;
+	u8 t;
+	bool is_valid;
+};
+
+struct st1232_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct st1232_ts_finger finger[MAX_FINGERS];
+};
+
+static int st1232_ts_read_data(struct st1232_ts_data *ts)
+{
+	struct st1232_ts_finger *finger = ts->finger;
+	struct i2c_client *client = ts->client;
+	struct i2c_msg msg[2];
+	int error;
+	u8 start_reg;
+	u8 buf[10];
+
+	/* read touchscreen data from ST1232 */
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = &start_reg;
+	start_reg = 0x10;
+
+	msg[1].addr = ts->client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = sizeof(buf);
+	msg[1].buf = buf;
+
+	error = i2c_transfer(client->adapter, msg, 2);
+	if (error < 0)
+		return error;
+
+	/* get "valid" bits */
+	finger[0].is_valid = buf[2] >> 7;
+	finger[1].is_valid = buf[5] >> 7;
+
+	/* get xy coordinate */
+	if (finger[0].is_valid) {
+		finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3];
+		finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4];
+		finger[0].t = buf[8];
+	}
+
+	if (finger[1].is_valid) {
+		finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6];
+		finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7];
+		finger[1].t = buf[9];
+	}
+
+	return 0;
+}
+
+static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
+{
+	struct st1232_ts_data *ts = dev_id;
+	struct st1232_ts_finger *finger = ts->finger;
+	struct input_dev *input_dev = ts->input_dev;
+	int count = 0;
+	int i, ret;
+
+	ret = st1232_ts_read_data(ts);
+	if (ret < 0)
+		goto end;
+
+	/* multi touch protocol */
+	for (i = 0; i < MAX_FINGERS; i++) {
+		if (!finger[i].is_valid)
+			continue;
+
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y);
+		input_mt_sync(input_dev);
+		count++;
+	}
+
+	/* SYN_MT_REPORT only if no contact */
+	if (!count)
+		input_mt_sync(input_dev);
+
+	/* SYN_REPORT */
+	input_sync(input_dev);
+
+end:
+	return IRQ_HANDLED;
+}
+
+static int __devinit st1232_ts_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct st1232_ts_data *ts;
+	struct input_dev *input_dev;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "need I2C_FUNC_I2C\n");
+		return -EIO;
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "no IRQ?\n");
+		return -EINVAL;
+	}
+
+
+	ts = kzalloc(sizeof(struct st1232_ts_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->client = client;
+	ts->input_dev = input_dev;
+
+	input_dev->name = "st1232-touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_SYN, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0);
+
+	error = request_threaded_irq(client->irq, NULL, st1232_ts_irq_handler,
+				     IRQF_ONESHOT, client->name, ts);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(ts->input_dev);
+	if (error) {
+		dev_err(&client->dev, "Unable to register %s input device\n",
+			input_dev->name);
+		goto err_free_irq;
+	}
+
+	i2c_set_clientdata(client, ts);
+	device_init_wakeup(&client->dev, 1);
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, ts);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+	return error;
+}
+
+static int __devexit st1232_ts_remove(struct i2c_client *client)
+{
+	struct st1232_ts_data *ts = i2c_get_clientdata(client);
+
+	device_init_wakeup(&client->dev, 0);
+	free_irq(client->irq, ts);
+	input_unregister_device(ts->input_dev);
+	kfree(ts);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int st1232_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+	else
+		disable_irq(client->irq);
+
+	return 0;
+}
+
+static int st1232_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+	else
+		enable_irq(client->irq);
+
+	return 0;
+}
+
+static const struct dev_pm_ops st1232_ts_pm_ops = {
+	.suspend	= st1232_ts_suspend,
+	.resume		= st1232_ts_resume,
+};
+#endif
+
+static const struct i2c_device_id st1232_ts_id[] = {
+	{ ST1232_TS_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
+
+static struct i2c_driver st1232_ts_driver = {
+	.probe		= st1232_ts_probe,
+	.remove		= __devexit_p(st1232_ts_remove),
+	.id_table	= st1232_ts_id,
+	.driver = {
+		.name	= ST1232_TS_NAME,
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &st1232_ts_pm_ops,
+#endif
+	},
+};
+
+static int __init st1232_ts_init(void)
+{
+	return i2c_add_driver(&st1232_ts_driver);
+}
+module_init(st1232_ts_init);
+
+static void __exit st1232_ts_exit(void)
+{
+	i2c_del_driver(&st1232_ts_driver);
+}
+module_exit(st1232_ts_exit);
+
+MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>");
+MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index f45f80f6d33..73fd6642b68 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -178,6 +178,7 @@ static const struct usb_device_id usbtouch_devices[] = {
 
 #ifdef CONFIG_TOUCHSCREEN_USB_ITM
 	{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+	{USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM},
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 9ae4c7b16ba..8ed53aded2d 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -15,10 +15,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/serio.h>
 #include <linux/init.h>
 #include <linux/ctype.h>
+#include <linux/delay.h>
 
 #define DRIVER_DESC	"Wacom W8001 serial touchscreen driver"
 
@@ -37,6 +38,7 @@ MODULE_LICENSE("GPL");
 
 #define W8001_QUERY_PACKET	0x20
 
+#define W8001_CMD_STOP		'0'
 #define W8001_CMD_START		'1'
 #define W8001_CMD_QUERY		'*'
 #define W8001_CMD_TOUCHQUERY	'%'
@@ -48,8 +50,6 @@ MODULE_LICENSE("GPL");
 #define W8001_PKTLEN_TPCCTL	11	/* control packet */
 #define W8001_PKTLEN_TOUCH2FG	13
 
-#define MAX_TRACKING_ID		0xFF	/* arbitrarily chosen */
-
 struct w8001_coord {
 	u8 rdy;
 	u8 tsw;
@@ -87,7 +87,6 @@ struct w8001 {
 	char phys[32];
 	int type;
 	unsigned int pktlen;
-	int trkid[2];
 };
 
 static void parse_data(u8 *data, struct w8001_coord *coord)
@@ -116,28 +115,23 @@ static void parse_data(u8 *data, struct w8001_coord *coord)
 
 static void parse_touch(struct w8001 *w8001)
 {
-	static int trkid;
 	struct input_dev *dev = w8001->dev;
 	unsigned char *data = w8001->data;
 	int i;
 
 	for (i = 0; i < 2; i++) {
-		input_mt_slot(dev, i);
+		bool touch = data[0] & (1 << i);
 
-		if (data[0] & (1 << i)) {
+		input_mt_slot(dev, i);
+		input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
+		if (touch) {
 			int x = (data[6 * i + 1] << 7) | (data[6 * i + 2]);
 			int y = (data[6 * i + 3] << 7) | (data[6 * i + 4]);
 			/* data[5,6] and [11,12] is finger capacity */
 
 			input_report_abs(dev, ABS_MT_POSITION_X, x);
 			input_report_abs(dev, ABS_MT_POSITION_Y, y);
-			input_report_abs(dev, ABS_MT_TOOL_TYPE, MT_TOOL_FINGER);
-			if (w8001->trkid[i] < 0)
-				w8001->trkid[i] = trkid++ & MAX_TRACKING_ID;
-		} else {
-			w8001->trkid[i] = -1;
 		}
-		input_report_abs(dev, ABS_MT_TRACKING_ID, w8001->trkid[i]);
 	}
 
 	input_sync(dev);
@@ -287,24 +281,46 @@ static int w8001_setup(struct w8001 *w8001)
 	struct w8001_coord coord;
 	int error;
 
-	error = w8001_command(w8001, W8001_CMD_QUERY, true);
+	error = w8001_command(w8001, W8001_CMD_STOP, false);
 	if (error)
 		return error;
 
-	parse_data(w8001->response, &coord);
+	msleep(250);	/* wait 250ms before querying the device */
 
-	input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
-	input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
-	input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
-	input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
-	input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+	/* penabled? */
+	error = w8001_command(w8001, W8001_CMD_QUERY, true);
+	if (!error) {
+		__set_bit(BTN_TOOL_PEN, dev->keybit);
+		__set_bit(BTN_TOOL_RUBBER, dev->keybit);
+		__set_bit(BTN_STYLUS, dev->keybit);
+		__set_bit(BTN_STYLUS2, dev->keybit);
+		parse_data(w8001->response, &coord);
+
+		input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+		input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
+		if (coord.tilt_x && coord.tilt_y) {
+			input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
+			input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+		}
+	}
 
+	/* Touch enabled? */
 	error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
-	if (!error) {
+
+	/*
+	 * Some non-touch devices may reply to the touch query. But their
+	 * second byte is empty, which indicates touch is not supported.
+	 */
+	if (!error && w8001->response[1]) {
 		struct w8001_touch_query touch;
 
 		parse_touchquery(w8001->response, &touch);
 
+		input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+		__set_bit(BTN_TOOL_FINGER, dev->keybit);
+
 		switch (touch.sensor_id) {
 		case 0:
 		case 2:
@@ -318,15 +334,13 @@ static int w8001_setup(struct w8001 *w8001)
 		case 5:
 			w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
 
-			input_mt_create_slots(dev, 2);
-			input_set_abs_params(dev, ABS_MT_TRACKING_ID,
-						0, MAX_TRACKING_ID, 0, 0);
+			input_mt_init_slots(dev, 2);
 			input_set_abs_params(dev, ABS_MT_POSITION_X,
 						0, touch.x, 0, 0);
 			input_set_abs_params(dev, ABS_MT_POSITION_Y,
 						0, touch.y, 0, 0);
 			input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
-						0, 0, 0, 0);
+						0, MT_TOOL_MAX, 0, 0);
 			break;
 		}
 	}
@@ -372,7 +386,6 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 	w8001->serio = serio;
 	w8001->id = serio->id.id;
 	w8001->dev = input_dev;
-	w8001->trkid[0] = w8001->trkid[1] = -1;
 	init_completion(&w8001->cmd_done);
 	snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
 
@@ -385,11 +398,7 @@ static int w8001_connect(struct serio *serio, struct serio_driver *drv)
 	input_dev->dev.parent = &serio->dev;
 
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
-	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
-	input_dev->keybit[BIT_WORD(BTN_TOOL_PEN)] |= BIT_MASK(BTN_TOOL_PEN);
-	input_dev->keybit[BIT_WORD(BTN_TOOL_RUBBER)] |= BIT_MASK(BTN_TOOL_RUBBER);
-	input_dev->keybit[BIT_WORD(BTN_STYLUS)] |= BIT_MASK(BTN_STYLUS);
-	input_dev->keybit[BIT_WORD(BTN_STYLUS2)] |= BIT_MASK(BTN_STYLUS2);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
 
 	serio_set_drvdata(serio, w8001);
 	err = serio_open(serio, drv);
diff --git a/drivers/input/xen-kbdfront.c b/drivers/input/xen-kbdfront.c
index e0c024db2ca..7f85a862ad1 100644
--- a/drivers/input/xen-kbdfront.c
+++ b/drivers/input/xen-kbdfront.c
@@ -17,6 +17,8 @@
  * Switch to grant tables together with xen-fbfront.c.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/module.h>
@@ -84,9 +86,8 @@ static irqreturn_t input_handler(int rq, void *dev_id)
 				input_report_key(dev, event->key.keycode,
 						 event->key.pressed);
 			else
-				printk(KERN_WARNING
-				       "xenkbd: unhandled keycode 0x%x\n",
-				       event->key.keycode);
+				pr_warning("unhandled keycode 0x%x\n",
+					   event->key.keycode);
 			break;
 		case XENKBD_TYPE_POS:
 			input_report_abs(dev, ABS_X, event->pos.abs_x);
@@ -292,8 +293,7 @@ InitWait:
 			ret = xenbus_printf(XBT_NIL, info->xbdev->nodename,
 					    "request-abs-pointer", "1");
 			if (ret)
-				printk(KERN_WARNING
-				       "xenkbd: can't request abs-pointer");
+				pr_warning("can't request abs-pointer\n");
 		}
 		xenbus_switch_state(dev, XenbusStateConnected);
 		break;
diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c
index e54e79d4e2c..92607ed25e2 100644
--- a/drivers/isdn/capi/capidrv.c
+++ b/drivers/isdn/capi/capidrv.c
@@ -2297,6 +2297,7 @@ static int __init capidrv_init(void)
 
 	errcode = capi20_get_profile(0, &profile);
 	if (errcode != CAPI_NOERROR) {
+		unregister_capictr_notifier(&capictr_nb);
 		capi20_release(&global.ap);
 		return -EIO;
 	}
diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c
index 3acf94cc5ac..2b33b2627fc 100644
--- a/drivers/isdn/capi/kcapi.c
+++ b/drivers/isdn/capi/kcapi.c
@@ -38,6 +38,7 @@
 #include <linux/rcupdate.h>
 
 static int showcapimsgs = 0;
+static struct workqueue_struct *kcapi_wq;
 
 MODULE_DESCRIPTION("CAPI4Linux: kernel CAPI layer");
 MODULE_AUTHOR("Carsten Paeth");
@@ -291,7 +292,7 @@ static int notify_push(unsigned int event_type, u32 controller)
 	event->type = event_type;
 	event->controller = controller;
 
-	schedule_work(&event->work);
+	queue_work(kcapi_wq, &event->work);
 	return 0;
 }
 
@@ -408,7 +409,7 @@ void capi_ctr_handle_message(struct capi_ctr *ctr, u16 appl,
 		goto error;
 	}
 	skb_queue_tail(&ap->recv_queue, skb);
-	schedule_work(&ap->recv_work);
+	queue_work(kcapi_wq, &ap->recv_work);
 	rcu_read_unlock();
 
 	return;
@@ -743,7 +744,7 @@ u16 capi20_release(struct capi20_appl *ap)
 
 	mutex_unlock(&capi_controller_lock);
 
-	flush_scheduled_work();
+	flush_workqueue(kcapi_wq);
 	skb_queue_purge(&ap->recv_queue);
 
 	if (showcapimsgs & 1) {
@@ -1285,21 +1286,30 @@ static int __init kcapi_init(void)
 {
 	int err;
 
+	kcapi_wq = alloc_workqueue("kcapi", 0, 0);
+	if (!kcapi_wq)
+		return -ENOMEM;
+
 	register_capictr_notifier(&capictr_nb);
 
 	err = cdebug_init();
-	if (!err)
-		kcapi_proc_init();
-	return err;
+	if (err) {
+		unregister_capictr_notifier(&capictr_nb);
+		destroy_workqueue(kcapi_wq);
+		return err;
+	}
+
+	kcapi_proc_init();
+	return 0;
 }
 
 static void __exit kcapi_exit(void)
 {
         kcapi_proc_exit();
 
-	/* make sure all notifiers are finished */
-	flush_scheduled_work();
+	unregister_capictr_notifier(&capictr_nb);
 	cdebug_exit();
+	destroy_workqueue(kcapi_wq);
 }
 
 module_init(kcapi_init);
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
index bcc174e4f3b..658e75f18d0 100644
--- a/drivers/isdn/gigaset/capi.c
+++ b/drivers/isdn/gigaset/capi.c
@@ -1900,6 +1900,7 @@ static void do_disconnect_req(struct gigaset_capi_ctr *iif,
 		if (b3skb == NULL) {
 			dev_err(cs->dev, "%s: out of memory\n", __func__);
 			send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+			kfree(b3cmsg);
 			return;
 		}
 		capi_cmsg2message(b3cmsg,
diff --git a/drivers/isdn/hardware/mISDN/mISDNinfineon.c b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
index e90db8870b6..bc0529ac88a 100644
--- a/drivers/isdn/hardware/mISDN/mISDNinfineon.c
+++ b/drivers/isdn/hardware/mISDN/mISDNinfineon.c
@@ -420,7 +420,7 @@ enable_hwirq(struct inf_hw *hw)
 		break;
 	case INF_NICCY:
 		val = inl((u32)hw->cfg.start + NICCY_IRQ_CTRL_REG);
-		val |= NICCY_IRQ_ENABLE;;
+		val |= NICCY_IRQ_ENABLE;
 		outl(val, (u32)hw->cfg.start + NICCY_IRQ_CTRL_REG);
 		break;
 	case INF_SCT_1:
@@ -924,7 +924,7 @@ setup_instance(struct inf_hw *card)
 		mISDNipac_init(&card->ipac, card);
 
 	if (card->ipac.isac.dch.dev.Bprotocols == 0)
-		goto error_setup;;
+		goto error_setup;
 
 	err = mISDN_register_device(&card->ipac.isac.dch.dev,
 		&card->pdev->dev, card->name);
diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c
index 38eb31439a7..d13fa5b119f 100644
--- a/drivers/isdn/hardware/mISDN/mISDNisar.c
+++ b/drivers/isdn/hardware/mISDN/mISDNisar.c
@@ -264,7 +264,7 @@ load_firmware(struct isar_hw *isar, const u8 *buf, int size)
 			while (noc) {
 				val = le16_to_cpu(*sp++);
 				*mp++ = val >> 8;
-				*mp++ = val & 0xFF;;
+				*mp++ = val & 0xFF;
 				noc--;
 			}
 			spin_lock_irqsave(isar->hwlock, flags);
diff --git a/drivers/isdn/hisax/avm_pci.c b/drivers/isdn/hisax/avm_pci.c
index fcf4ed1cb4b..0e66af1decd 100644
--- a/drivers/isdn/hisax/avm_pci.c
+++ b/drivers/isdn/hisax/avm_pci.c
@@ -314,7 +314,7 @@ hdlc_fill_fifo(struct BCState *bcs)
 			bcs->hw.hdlc.ctrl.sr.cmd |= HDLC_CMD_XME;
 	}
 	if ((cs->debug & L1_DEB_HSCX) && !(cs->debug & L1_DEB_HSCX_FIFO))
-		debugl1(cs, "hdlc_fill_fifo %d/%ld", count, bcs->tx_skb->len);
+		debugl1(cs, "hdlc_fill_fifo %d/%u", count, bcs->tx_skb->len);
 	p = bcs->tx_skb->data;
 	ptr = (u_int *)p;
 	skb_pull(bcs->tx_skb, count);
diff --git a/drivers/isdn/hisax/callc.c b/drivers/isdn/hisax/callc.c
index f150330b5a2..37e685eafd2 100644
--- a/drivers/isdn/hisax/callc.c
+++ b/drivers/isdn/hisax/callc.c
@@ -65,7 +65,7 @@ hisax_findcard(int driverid)
 	return (struct IsdnCardState *) 0;
 }
 
-static void
+static __attribute__((format(printf, 3, 4))) void
 link_debug(struct Channel *chanp, int direction, char *fmt, ...)
 {
 	va_list args;
@@ -1068,7 +1068,7 @@ init_d_st(struct Channel *chanp)
 	return 0;
 }
 
-static void
+static __attribute__((format(printf, 2, 3))) void
 callc_debug(struct FsmInst *fi, char *fmt, ...)
 {
 	va_list args;
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index b133378d4dc..c110f8679ba 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -1917,7 +1917,7 @@ static void EChannel_proc_rcv(struct hisax_d_if *d_if)
 #ifdef CONFIG_PCI
 #include <linux/pci.h>
 
-static struct pci_device_id hisax_pci_tbl[] __devinitdata = {
+static struct pci_device_id hisax_pci_tbl[] __devinitdata __used = {
 #ifdef CONFIG_HISAX_FRITZPCI
 	{PCI_VDEVICE(AVM,      PCI_DEVICE_ID_AVM_A1)			},
 #endif
diff --git a/drivers/isdn/hisax/hfc_2bds0.c b/drivers/isdn/hisax/hfc_2bds0.c
index 7250f56a524..a16459a1332 100644
--- a/drivers/isdn/hisax/hfc_2bds0.c
+++ b/drivers/isdn/hisax/hfc_2bds0.c
@@ -292,7 +292,7 @@ hfc_fill_fifo(struct BCState *bcs)
 	}
 	count = GetFreeFifoBytes_B(bcs);
 	if (cs->debug & L1_DEB_HSCX)
-		debugl1(cs, "hfc_fill_fifo %d count(%ld/%d),%lx",
+		debugl1(cs, "hfc_fill_fifo %d count(%u/%d),%lx",
 			bcs->channel, bcs->tx_skb->len,
 			count, current->state);
 	if (count < bcs->tx_skb->len) {
@@ -719,7 +719,7 @@ hfc_fill_dfifo(struct IsdnCardState *cs)
 	}
 	count = GetFreeFifoBytes_D(cs);
 	if (cs->debug & L1_DEB_ISAC)
-		debugl1(cs, "hfc_fill_Dfifo count(%ld/%d)",
+		debugl1(cs, "hfc_fill_Dfifo count(%u/%d)",
 			cs->tx_skb->len, count);
 	if (count < cs->tx_skb->len) {
 		if (cs->debug & L1_DEB_ISAC)
diff --git a/drivers/isdn/hisax/hfc_2bs0.c b/drivers/isdn/hisax/hfc_2bs0.c
index b1f6481e119..626f85df302 100644
--- a/drivers/isdn/hisax/hfc_2bs0.c
+++ b/drivers/isdn/hisax/hfc_2bs0.c
@@ -282,7 +282,7 @@ hfc_fill_fifo(struct BCState *bcs)
 	    count += cs->hw.hfc.fifosize; 
 	} /* L1_MODE_TRANS */
 	if (cs->debug & L1_DEB_HSCX)
-		debugl1(cs, "hfc_fill_fifo %d count(%ld/%d)",
+		debugl1(cs, "hfc_fill_fifo %d count(%u/%d)",
 			bcs->channel, bcs->tx_skb->len,
 			count);
 	if (count < bcs->tx_skb->len) {
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 917cc84065b..3147020d188 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -550,7 +550,7 @@ hfcpci_fill_dfifo(struct IsdnCardState *cs)
 		count += D_FIFO_SIZE;	/* count now contains available bytes */
 
 	if (cs->debug & L1_DEB_ISAC)
-		debugl1(cs, "hfcpci_fill_Dfifo count(%ld/%d)",
+		debugl1(cs, "hfcpci_fill_Dfifo count(%u/%d)",
 			cs->tx_skb->len, count);
 	if (count < cs->tx_skb->len) {
 		if (cs->debug & L1_DEB_ISAC)
@@ -681,7 +681,7 @@ hfcpci_fill_fifo(struct BCState *bcs)
 		count += B_FIFO_SIZE;	/* count now contains available bytes */
 
 	if (cs->debug & L1_DEB_HSCX)
-		debugl1(cs, "hfcpci_fill_fifo %d count(%ld/%d),%lx",
+		debugl1(cs, "hfcpci_fill_fifo %d count(%u/%d),%lx",
 			bcs->channel, bcs->tx_skb->len,
 			count, current->state);
 
diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c
index 5aa138eb0b3..1235b7131ae 100644
--- a/drivers/isdn/hisax/hfc_sx.c
+++ b/drivers/isdn/hisax/hfc_sx.c
@@ -179,7 +179,7 @@ write_fifo(struct IsdnCardState *cs, struct sk_buff *skb, u_char fifo, int trans
 	  count += fifo_size;	/* count now contains available bytes */
 
 	if (cs->debug & L1_DEB_ISAC_FIFO)
-	  debugl1(cs, "hfcsx_write_fifo %d count(%ld/%d)",
+	  debugl1(cs, "hfcsx_write_fifo %d count(%u/%d)",
 		  fifo, skb->len, count);
 	if (count < skb->len) {
 	  if (cs->debug & L1_DEB_ISAC_FIFO)
@@ -265,7 +265,7 @@ read_fifo(struct IsdnCardState *cs, u_char fifo, int trans_max)
 	  count++;
 
 	  if (cs->debug & L1_DEB_ISAC_FIFO)
-	    debugl1(cs, "hfcsx_read_fifo %d count %ld)",
+	    debugl1(cs, "hfcsx_read_fifo %d count %u)",
 		    fifo, count);
 
 	  if ((count > fifo_size) || (count < 4)) {
@@ -986,7 +986,7 @@ HFCSX_l1hw(struct PStack *st, int pr, void *arg)
 				default:
 					spin_unlock_irqrestore(&cs->lock, flags);
 					if (cs->debug & L1_DEB_WARN)
-						debugl1(cs, "hfcsx_l1hw loop invalid %4lx", arg);
+						debugl1(cs, "hfcsx_l1hw loop invalid %4lx", (unsigned long)arg);
 					return;
 			}
 			cs->hw.hfcsx.trm |= 0x80;	/* enable IOM-loop */
diff --git a/drivers/isdn/hisax/hisax.h b/drivers/isdn/hisax/hisax.h
index 32ab3924aa7..de1c669c7b1 100644
--- a/drivers/isdn/hisax/hisax.h
+++ b/drivers/isdn/hisax/hisax.h
@@ -1286,7 +1286,9 @@ int jiftime(char *s, long mark);
 
 int HiSax_command(isdn_ctrl * ic);
 int HiSax_writebuf_skb(int id, int chan, int ack, struct sk_buff *skb);
+__attribute__((format(printf, 3, 4)))
 void HiSax_putstatus(struct IsdnCardState *cs, char *head, char *fmt, ...);
+__attribute__((format(printf, 3, 0)))
 void VHiSax_putstatus(struct IsdnCardState *cs, char *head, char *fmt, va_list args);
 void HiSax_reportcard(int cardnr, int sel);
 int QuickHex(char *txt, u_char * p, int cnt);
diff --git a/drivers/isdn/hisax/ipacx.c b/drivers/isdn/hisax/ipacx.c
index 751b25f2ff5..332104103e1 100644
--- a/drivers/isdn/hisax/ipacx.c
+++ b/drivers/isdn/hisax/ipacx.c
@@ -717,7 +717,7 @@ bch_mode(struct BCState *bcs, int mode, int bc)
 
         bc = bc ? 1 : 0;  // in case bc is greater than 1
 	if (cs->debug & L1_DEB_HSCX)
-		debugl1(cs, "mode_bch() switch B-% mode %d chan %d", hscx, mode, bc);
+		debugl1(cs, "mode_bch() switch B-%d mode %d chan %d", hscx, mode, bc);
 	bcs->mode = mode;
 	bcs->channel = bc;
   
diff --git a/drivers/isdn/hisax/isar.c b/drivers/isdn/hisax/isar.c
index 2e72227bd07..d4cce337add 100644
--- a/drivers/isdn/hisax/isar.c
+++ b/drivers/isdn/hisax/isar.c
@@ -189,7 +189,7 @@ ISARVersion(struct IsdnCardState *cs, char *s)
 static int
 isar_load_firmware(struct IsdnCardState *cs, u_char __user *buf)
 {
-	int ret, size, cnt, debug;
+	int cfu_ret, ret, size, cnt, debug;
 	u_char len, nom, noc;
 	u_short sadr, left, *sp;
 	u_char __user *p = buf;
@@ -212,9 +212,10 @@ isar_load_firmware(struct IsdnCardState *cs, u_char __user *buf)
 	cs->debug &= ~(L1_DEB_HSCX | L1_DEB_HSCX_FIFO);
 #endif
 	
-	if ((ret = copy_from_user(&size, p, sizeof(int)))) {
-		printk(KERN_ERR"isar_load_firmware copy_from_user ret %d\n", ret);
-		return ret;
+	cfu_ret = copy_from_user(&size, p, sizeof(int));
+	if (cfu_ret) {
+		printk(KERN_ERR"isar_load_firmware copy_from_user ret %d\n", cfu_ret);
+		return -EFAULT;
 	}
 	p += sizeof(int);
 	printk(KERN_DEBUG"isar_load_firmware size: %d\n", size);
@@ -953,7 +954,7 @@ isar_pump_statev_modem(struct BCState *bcs, u_char devt) {
 			break;
 		case PSEV_GSTN_CLR:
 			if (cs->debug & L1_DEB_HSCX)
-				debugl1(cs, "pump stev GSTN CLEAR", devt);
+				debugl1(cs, "pump stev GSTN CLEAR");
 			break;
 		default:
 			if (cs->debug & L1_DEB_HSCX)
@@ -1268,7 +1269,7 @@ isar_int_main(struct IsdnCardState *cs)
 static void
 ftimer_handler(struct BCState *bcs) {
 	if (bcs->cs->debug)
-		debugl1(bcs->cs, "ftimer flags %04x",
+		debugl1(bcs->cs, "ftimer flags %04lx",
 			bcs->Flag);
 	test_and_clear_bit(BC_FLG_FTI_RUN, &bcs->Flag);
 	if (test_and_clear_bit(BC_FLG_LL_CONN, &bcs->Flag)) {
@@ -1748,7 +1749,7 @@ isar_auxcmd(struct IsdnCardState *cs, isdn_ctrl *ic) {
 	struct BCState *bcs;
 
 	if (cs->debug & L1_DEB_HSCX)
-		debugl1(cs, "isar_auxcmd cmd/ch %x/%d", ic->command, ic->arg);
+		debugl1(cs, "isar_auxcmd cmd/ch %x/%ld", ic->command, ic->arg);
 	switch (ic->command) {
 		case (ISDN_CMD_FAXCMD):
 			bcs = cs->channel[ic->arg].bcs;
diff --git a/drivers/isdn/hisax/isdnl1.h b/drivers/isdn/hisax/isdnl1.h
index 172ad4c8c96..425d86116f2 100644
--- a/drivers/isdn/hisax/isdnl1.h
+++ b/drivers/isdn/hisax/isdnl1.h
@@ -21,6 +21,7 @@
 #define B_XMTBUFREADY	1
 #define B_ACKPENDING	2
 
+__attribute__((format(printf, 2, 3)))
 void debugl1(struct IsdnCardState *cs, char *fmt, ...);
 void DChannel_proc_xmt(struct IsdnCardState *cs);
 void DChannel_proc_rcv(struct IsdnCardState *cs);
diff --git a/drivers/isdn/hisax/isdnl3.c b/drivers/isdn/hisax/isdnl3.c
index fd0b643ab74..ad291f21b20 100644
--- a/drivers/isdn/hisax/isdnl3.c
+++ b/drivers/isdn/hisax/isdnl3.c
@@ -66,7 +66,7 @@ static char *strL3Event[] =
 	"EV_TIMEOUT",
 };
 
-static void
+static __attribute__((format(printf, 2, 3))) void
 l3m_debug(struct FsmInst *fi, char *fmt, ...)
 {
 	va_list args;
diff --git a/drivers/isdn/hisax/netjet.c b/drivers/isdn/hisax/netjet.c
index 5d7f0f2ff9b..644891efc26 100644
--- a/drivers/isdn/hisax/netjet.c
+++ b/drivers/isdn/hisax/netjet.c
@@ -254,7 +254,7 @@ static int make_raw_data(struct BCState *bcs) {
 		val >>= 1;
 	}
 	if (bcs->cs->debug & L1_DEB_HSCX)
-		debugl1(bcs->cs,"tiger make_raw: in %ld out %d.%d",
+		debugl1(bcs->cs,"tiger make_raw: in %u out %d.%d",
 			bcs->tx_skb->len, s_cnt, bitcnt);
 	if (bitcnt) {
 		while (8>bitcnt++) {
@@ -361,7 +361,7 @@ static int make_raw_data_56k(struct BCState *bcs) {
 		val >>= 1;
 	}
 	if (bcs->cs->debug & L1_DEB_HSCX)
-		debugl1(bcs->cs,"tiger make_raw_56k: in %ld out %d.%d",
+		debugl1(bcs->cs,"tiger make_raw_56k: in %u out %d.%d",
 			bcs->tx_skb->len, s_cnt, bitcnt);
 	if (bitcnt) {
 		while (8>bitcnt++) {
@@ -612,7 +612,7 @@ void netjet_fill_dma(struct BCState *bcs)
 	if (!bcs->tx_skb)
 		return;
 	if (bcs->cs->debug & L1_DEB_HSCX)
-		debugl1(bcs->cs,"tiger fill_dma1: c%d %4x", bcs->channel,
+		debugl1(bcs->cs,"tiger fill_dma1: c%d %4lx", bcs->channel,
 			bcs->Flag);
 	if (test_and_set_bit(BC_FLG_BUSY, &bcs->Flag))
 		return;
@@ -625,7 +625,7 @@ void netjet_fill_dma(struct BCState *bcs)
 			return;		
 	};
 	if (bcs->cs->debug & L1_DEB_HSCX)
-		debugl1(bcs->cs,"tiger fill_dma2: c%d %4x", bcs->channel,
+		debugl1(bcs->cs,"tiger fill_dma2: c%d %4lx", bcs->channel,
 			bcs->Flag);
 	if (test_and_clear_bit(BC_FLG_NOFRAME, &bcs->Flag)) {
 		write_raw(bcs, bcs->hw.tiger.sendp, bcs->hw.tiger.free);
@@ -667,7 +667,7 @@ void netjet_fill_dma(struct BCState *bcs)
 		write_raw(bcs, p, cnt);
 	}
 	if (bcs->cs->debug & L1_DEB_HSCX)
-		debugl1(bcs->cs,"tiger fill_dma3: c%d %4x", bcs->channel,
+		debugl1(bcs->cs,"tiger fill_dma3: c%d %4lx", bcs->channel,
 			bcs->Flag);
 }
 
diff --git a/drivers/isdn/hisax/st5481_d.c b/drivers/isdn/hisax/st5481_d.c
index b7876b19fe7..44082637a09 100644
--- a/drivers/isdn/hisax/st5481_d.c
+++ b/drivers/isdn/hisax/st5481_d.c
@@ -167,7 +167,8 @@ static struct FsmNode L1FnList[] __initdata =
 	{ST_L1_F8, EV_IND_RSY,           l1_ignore},
 };
 
-static void l1m_debug(struct FsmInst *fi, char *fmt, ...)
+static __attribute__((format(printf, 2, 3)))
+void l1m_debug(struct FsmInst *fi, char *fmt, ...)
 {
 	va_list args;
 	char buf[256];
@@ -269,7 +270,8 @@ static char *strDoutEvent[] =
 	"EV_DOUT_UNDERRUN",
 };
 
-static void dout_debug(struct FsmInst *fi, char *fmt, ...)
+static __attribute__((format(printf, 2, 3)))
+void dout_debug(struct FsmInst *fi, char *fmt, ...)
 {
 	va_list args;
 	char buf[256];
diff --git a/drivers/isdn/i4l/isdn_concap.c b/drivers/isdn/i4l/isdn_concap.c
index 46048e55f24..d568689669f 100644
--- a/drivers/isdn/i4l/isdn_concap.c
+++ b/drivers/isdn/i4l/isdn_concap.c
@@ -61,7 +61,7 @@ static int isdn_concap_dl_data_req(struct concap_proto *concap, struct sk_buff *
 static int isdn_concap_dl_connect_req(struct concap_proto *concap)
 {
 	struct net_device *ndev = concap -> net_dev;
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(ndev);
+	isdn_net_local *lp = netdev_priv(ndev);
 	int ret;
 	IX25DEBUG( "isdn_concap_dl_connect_req: %s \n", ndev -> name);
 
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index 26d44c3ca1d..afeede7ee29 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -827,7 +827,7 @@ isdn_net_dial(void)
 void
 isdn_net_hangup(struct net_device *d)
 {
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(d);
+	isdn_net_local *lp = netdev_priv(d);
 	isdn_ctrl cmd;
 #ifdef CONFIG_ISDN_X25
 	struct concap_proto *cprot = lp->netdev->cprot;
@@ -1052,7 +1052,7 @@ isdn_net_xmit(struct net_device *ndev, struct sk_buff *skb)
 {
 	isdn_net_dev *nd;
 	isdn_net_local *slp;
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(ndev);
+	isdn_net_local *lp = netdev_priv(ndev);
 	int retv = NETDEV_TX_OK;
 
 	if (((isdn_net_local *) netdev_priv(ndev))->master) {
@@ -1116,7 +1116,7 @@ isdn_net_xmit(struct net_device *ndev, struct sk_buff *skb)
 static void
 isdn_net_adjust_hdr(struct sk_buff *skb, struct net_device *dev)
 {
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(dev);
+	isdn_net_local *lp = netdev_priv(dev);
 	if (!skb)
 		return;
 	if (lp->p_encap == ISDN_NET_ENCAP_ETHER) {
@@ -1131,7 +1131,7 @@ isdn_net_adjust_hdr(struct sk_buff *skb, struct net_device *dev)
 
 static void isdn_net_tx_timeout(struct net_device * ndev)
 {
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(ndev);
+	isdn_net_local *lp = netdev_priv(ndev);
 
 	printk(KERN_WARNING "isdn_tx_timeout dev %s dialstate %d\n", ndev->name, lp->dialstate);
 	if (!lp->dialstate){
@@ -1165,7 +1165,7 @@ static void isdn_net_tx_timeout(struct net_device * ndev)
 static netdev_tx_t
 isdn_net_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(ndev);
+	isdn_net_local *lp = netdev_priv(ndev);
 #ifdef CONFIG_ISDN_X25
 	struct concap_proto * cprot = lp -> netdev -> cprot;
 /* At this point hard_start_xmit() passes control to the encapsulation
@@ -1347,7 +1347,7 @@ isdn_net_close(struct net_device *dev)
 static struct net_device_stats *
 isdn_net_get_stats(struct net_device *dev)
 {
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(dev);
+	isdn_net_local *lp = netdev_priv(dev);
 	return &lp->stats;
 }
 
@@ -1426,7 +1426,7 @@ isdn_net_ciscohdlck_alloc_skb(isdn_net_local *lp, int len)
 static int
 isdn_ciscohdlck_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(dev);
+	isdn_net_local *lp = netdev_priv(dev);
 	unsigned long len = 0;
 	unsigned long expires = 0;
 	int tmp = 0;
@@ -1493,7 +1493,7 @@ isdn_ciscohdlck_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 static int isdn_net_ioctl(struct net_device *dev,
 			  struct ifreq *ifr, int cmd)
 {
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(dev);
+	isdn_net_local *lp = netdev_priv(dev);
 
 	switch (lp->p_encap) {
 #ifdef CONFIG_ISDN_PPP
@@ -1786,7 +1786,7 @@ isdn_net_ciscohdlck_receive(isdn_net_local *lp, struct sk_buff *skb)
 static void
 isdn_net_receive(struct net_device *ndev, struct sk_buff *skb)
 {
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(ndev);
+	isdn_net_local *lp = netdev_priv(ndev);
 	isdn_net_local *olp = lp;	/* original 'lp' */
 #ifdef CONFIG_ISDN_X25
 	struct concap_proto *cprot = lp -> netdev -> cprot;
@@ -1800,7 +1800,7 @@ isdn_net_receive(struct net_device *ndev, struct sk_buff *skb)
 		 * handle master's statistics and hangup-timeout
 		 */
 		ndev = lp->master;
-		lp = (isdn_net_local *) netdev_priv(ndev);
+		lp = netdev_priv(ndev);
 		lp->stats.rx_packets++;
 		lp->stats.rx_bytes += skb->len;
 	}
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index fe824e0cbb2..9e8162c80bb 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -1147,15 +1147,14 @@ isdn_ppp_push_higher(isdn_net_dev * net_dev, isdn_net_local * lp, struct sk_buff
 	}
 
 	if (is->pass_filter
-	    && sk_run_filter(skb, is->pass_filter, is->pass_len) == 0) {
+	    && sk_run_filter(skb, is->pass_filter) == 0) {
 		if (is->debug & 0x2)
 			printk(KERN_DEBUG "IPPP: inbound frame filtered.\n");
 		kfree_skb(skb);
 		return;
 	}
 	if (!(is->active_filter
-	      && sk_run_filter(skb, is->active_filter,
-	                       is->active_len) == 0)) {
+	      && sk_run_filter(skb, is->active_filter) == 0)) {
 		if (is->debug & 0x2)
 			printk(KERN_DEBUG "IPPP: link-active filter: reseting huptimer.\n");
 		lp->huptimer = 0;
@@ -1221,7 +1220,7 @@ isdn_ppp_xmit(struct sk_buff *skb, struct net_device *netdev)
 	struct ippp_struct *ipt,*ipts;
 	int slot, retval = NETDEV_TX_OK;
 
-	mlp = (isdn_net_local *) netdev_priv(netdev);
+	mlp = netdev_priv(netdev);
 	nd = mlp->netdev;       /* get master lp */
 
 	slot = mlp->ppp_slot;
@@ -1294,15 +1293,14 @@ isdn_ppp_xmit(struct sk_buff *skb, struct net_device *netdev)
 	}
 
 	if (ipt->pass_filter
-	    && sk_run_filter(skb, ipt->pass_filter, ipt->pass_len) == 0) {
+	    && sk_run_filter(skb, ipt->pass_filter) == 0) {
 		if (ipt->debug & 0x4)
 			printk(KERN_DEBUG "IPPP: outbound frame filtered.\n");
 		kfree_skb(skb);
 		goto unlock;
 	}
 	if (!(ipt->active_filter
-	      && sk_run_filter(skb, ipt->active_filter,
-		               ipt->active_len) == 0)) {
+	      && sk_run_filter(skb, ipt->active_filter) == 0)) {
 		if (ipt->debug & 0x4)
 			printk(KERN_DEBUG "IPPP: link-active filter: reseting huptimer.\n");
 		lp->huptimer = 0;
@@ -1492,9 +1490,9 @@ int isdn_ppp_autodial_filter(struct sk_buff *skb, isdn_net_local *lp)
 	}
 	
 	drop |= is->pass_filter
-	        && sk_run_filter(skb, is->pass_filter, is->pass_len) == 0;
+	        && sk_run_filter(skb, is->pass_filter) == 0;
 	drop |= is->active_filter
-	        && sk_run_filter(skb, is->active_filter, is->active_len) == 0;
+	        && sk_run_filter(skb, is->active_filter) == 0;
 	
 	skb_push(skb, IPPP_MAX_HEADER - 4);
 	return drop;
@@ -1985,7 +1983,7 @@ isdn_ppp_dev_ioctl_stats(int slot, struct ifreq *ifr, struct net_device *dev)
 {
 	struct ppp_stats __user *res = ifr->ifr_data;
 	struct ppp_stats t;
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(dev);
+	isdn_net_local *lp = netdev_priv(dev);
 
 	if (!access_ok(VERIFY_WRITE, res, sizeof(struct ppp_stats)))
 		return -EFAULT;
@@ -2024,7 +2022,7 @@ isdn_ppp_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
 	int error=0;
 	int len;
-	isdn_net_local *lp = (isdn_net_local *) netdev_priv(dev);
+	isdn_net_local *lp = netdev_priv(dev);
 
 
 	if (lp->p_encap != ISDN_NET_ENCAP_SYNCPPP)
@@ -2091,7 +2089,7 @@ isdn_ppp_dial_slave(char *name)
 
 	sdev = lp->slave;
 	while (sdev) {
-		isdn_net_local *mlp = (isdn_net_local *) netdev_priv(sdev);
+		isdn_net_local *mlp = netdev_priv(sdev);
 		if (!(mlp->flags & ISDN_NET_CONNECTED))
 			break;
 		sdev = mlp->slave;
@@ -2099,7 +2097,7 @@ isdn_ppp_dial_slave(char *name)
 	if (!sdev)
 		return 2;
 
-	isdn_net_dial_req((isdn_net_local *) netdev_priv(sdev));
+	isdn_net_dial_req(netdev_priv(sdev));
 	return 0;
 #else
 	return -1;
@@ -2122,7 +2120,7 @@ isdn_ppp_hangup_slave(char *name)
 
 	sdev = lp->slave;
 	while (sdev) {
-		isdn_net_local *mlp = (isdn_net_local *) netdev_priv(sdev);
+		isdn_net_local *mlp = netdev_priv(sdev);
 
 		if (mlp->slave) { /* find last connected link in chain */
 			isdn_net_local *nlp = ISDN_SLAVE_PRIV(mlp);
diff --git a/drivers/isdn/icn/icn.c b/drivers/isdn/icn/icn.c
index 2e847a90bad..f2b5bab5e6a 100644
--- a/drivers/isdn/icn/icn.c
+++ b/drivers/isdn/icn/icn.c
@@ -1627,7 +1627,7 @@ __setup("icn=", icn_setup);
 static int __init icn_init(void)
 {
 	char *p;
-	char rev[10];
+	char rev[20];
 
 	memset(&dev, 0, sizeof(icn_dev));
 	dev.memaddr = (membase & 0x0ffc000);
@@ -1637,9 +1637,10 @@ static int __init icn_init(void)
 	spin_lock_init(&dev.devlock);
 
 	if ((p = strchr(revision, ':'))) {
-		strcpy(rev, p + 1);
+		strncpy(rev, p + 1, 20);
 		p = strchr(rev, '$');
-		*p = 0;
+		if (p)
+			*p = 0;
 	} else
 		strcpy(rev, " ??? ");
 	printk(KERN_NOTICE "ICN-ISDN-driver Rev%smem=0x%08lx\n", rev,
diff --git a/drivers/isdn/mISDN/hwchannel.c b/drivers/isdn/mISDN/hwchannel.c
index 307bd6e8988..199f374cf9d 100644
--- a/drivers/isdn/mISDN/hwchannel.c
+++ b/drivers/isdn/mISDN/hwchannel.c
@@ -110,7 +110,7 @@ mISDN_freedchannel(struct dchannel *ch)
 	}
 	skb_queue_purge(&ch->squeue);
 	skb_queue_purge(&ch->rqueue);
-	flush_scheduled_work();
+	flush_work_sync(&ch->workq);
 	return 0;
 }
 EXPORT_SYMBOL(mISDN_freedchannel);
@@ -143,7 +143,7 @@ mISDN_freebchannel(struct bchannel *ch)
 	mISDN_clear_bchannel(ch);
 	skb_queue_purge(&ch->rqueue);
 	ch->rcount = 0;
-	flush_scheduled_work();
+	flush_work_sync(&ch->workq);
 	return 0;
 }
 EXPORT_SYMBOL(mISDN_freebchannel);
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index 5b59796ed25..bd526f664a3 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -1269,6 +1269,8 @@ release_card(struct l1oip *hc)
 	if (timer_pending(&hc->timeout_tl))
 		del_timer(&hc->timeout_tl);
 
+	cancel_work_sync(&hc->workq);
+
 	if (hc->socket_thread)
 		l1oip_socket_close(hc);
 
diff --git a/drivers/isdn/mISDN/layer1.c b/drivers/isdn/mISDN/layer1.c
index ac4aa18c632..5cc7c001c52 100644
--- a/drivers/isdn/mISDN/layer1.c
+++ b/drivers/isdn/mISDN/layer1.c
@@ -99,12 +99,16 @@ static void
 l1m_debug(struct FsmInst *fi, char *fmt, ...)
 {
 	struct layer1 *l1 = fi->userdata;
+	struct va_format vaf;
 	va_list va;
 
 	va_start(va, fmt);
-	printk(KERN_DEBUG "%s: ", dev_name(&l1->dch->dev.dev));
-	vprintk(fmt, va);
-	printk("\n");
+
+	vaf.fmt = fmt;
+	vaf.va = &va;
+
+	printk(KERN_DEBUG "%s: %pV\n", dev_name(&l1->dch->dev.dev), &vaf);
+
 	va_end(va);
 }
 
diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
index c9737178876..4ae75053c9d 100644
--- a/drivers/isdn/mISDN/layer2.c
+++ b/drivers/isdn/mISDN/layer2.c
@@ -95,14 +95,20 @@ static void
 l2m_debug(struct FsmInst *fi, char *fmt, ...)
 {
 	struct layer2 *l2 = fi->userdata;
+	struct va_format vaf;
 	va_list va;
 
 	if (!(*debug & DEBUG_L2_FSM))
 		return;
+
 	va_start(va, fmt);
-	printk(KERN_DEBUG "l2 (sapi %d tei %d): ", l2->sapi, l2->tei);
-	vprintk(fmt, va);
-	printk("\n");
+
+	vaf.fmt = fmt;
+	vaf.va = &va;
+
+	printk(KERN_DEBUG "l2 (sapi %d tei %d): %pV\n",
+	       l2->sapi, l2->tei, &vaf);
+
 	va_end(va);
 }
 
diff --git a/drivers/isdn/mISDN/tei.c b/drivers/isdn/mISDN/tei.c
index 1b85d9d2749..687c9b6264a 100644
--- a/drivers/isdn/mISDN/tei.c
+++ b/drivers/isdn/mISDN/tei.c
@@ -79,14 +79,19 @@ static void
 da_debug(struct FsmInst *fi, char *fmt, ...)
 {
 	struct manager	*mgr = fi->userdata;
+	struct va_format vaf;
 	va_list va;
 
 	if (!(*debug & DEBUG_L2_TEIFSM))
 		return;
+
 	va_start(va, fmt);
-	printk(KERN_DEBUG "mgr(%d): ", mgr->ch.st->dev->id);
-	vprintk(fmt, va);
-	printk("\n");
+
+	vaf.fmt = fmt;
+	vaf.va = &va;
+
+	printk(KERN_DEBUG "mgr(%d): %pV\n", mgr->ch.st->dev->id, &vaf);
+
 	va_end(va);
 }
 
@@ -223,14 +228,20 @@ static void
 tei_debug(struct FsmInst *fi, char *fmt, ...)
 {
 	struct teimgr	*tm = fi->userdata;
+	struct va_format vaf;
 	va_list va;
 
 	if (!(*debug & DEBUG_L2_TEIFSM))
 		return;
+
 	va_start(va, fmt);
-	printk(KERN_DEBUG "sapi(%d) tei(%d): ", tm->l2->sapi, tm->l2->tei);
-	vprintk(fmt, va);
-	printk("\n");
+
+	vaf.fmt = fmt;
+	vaf.va = &va;
+
+	printk(KERN_DEBUG "sapi(%d) tei(%d): %pV\n",
+	       tm->l2->sapi, tm->l2->tei, &vaf);
+
 	va_end(va);
 }
 
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index cc2a88d5192..6f190f4cdbc 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -7,20 +7,20 @@ menuconfig NEW_LEDS
 	  This is not related to standard keyboard LEDs which are controlled
 	  via the input system.
 
-if NEW_LEDS
-
 config LEDS_CLASS
-	tristate "LED Class Support"
+	bool "LED Class Support"
+	depends on NEW_LEDS
 	help
 	  This option enables the led sysfs class in /sys/class/leds.  You'll
 	  need this to do anything useful with LEDs.  If unsure, say N.
 
-if LEDS_CLASS
+if NEW_LEDS
 
 comment "LED drivers"
 
 config LEDS_88PM860X
 	tristate "LED Support for Marvell 88PM860x PMIC"
+	depends on LEDS_CLASS
 	depends on MFD_88PM860X
 	help
 	  This option enables support for on-chip LED drivers found on Marvell
@@ -28,6 +28,7 @@ config LEDS_88PM860X
 
 config LEDS_ATMEL_PWM
 	tristate "LED Support using Atmel PWM outputs"
+	depends on LEDS_CLASS
 	depends on ATMEL_PWM
 	help
 	  This option enables support for LEDs driven using outputs
@@ -35,6 +36,7 @@ config LEDS_ATMEL_PWM
 
 config LEDS_LOCOMO
 	tristate "LED Support for Locomo device"
+	depends on LEDS_CLASS
 	depends on SHARP_LOCOMO
 	help
 	  This option enables support for the LEDs on Sharp Locomo.
@@ -42,6 +44,7 @@ config LEDS_LOCOMO
 
 config LEDS_MIKROTIK_RB532
 	tristate "LED Support for Mikrotik Routerboard 532"
+	depends on LEDS_CLASS
 	depends on MIKROTIK_RB532
 	help
 	  This option enables support for the so called "User LED" of
@@ -49,6 +52,7 @@ config LEDS_MIKROTIK_RB532
 
 config LEDS_S3C24XX
 	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
+	depends on LEDS_CLASS
 	depends on ARCH_S3C2410
 	help
 	  This option enables support for LEDs connected to GPIO lines
@@ -56,12 +60,14 @@ config LEDS_S3C24XX
 
 config LEDS_AMS_DELTA
 	tristate "LED Support for the Amstrad Delta (E3)"
+	depends on LEDS_CLASS
 	depends on MACH_AMS_DELTA
 	help
 	  This option enables support for the LEDs on Amstrad Delta (E3).
 
 config LEDS_NET48XX
 	tristate "LED Support for Soekris net48xx series Error LED"
+	depends on LEDS_CLASS
 	depends on SCx200_GPIO
 	help
 	  This option enables support for the Soekris net4801 and net4826 error
@@ -79,18 +85,21 @@ config LEDS_NET5501
 
 config LEDS_FSG
 	tristate "LED Support for the Freecom FSG-3"
+	depends on LEDS_CLASS
 	depends on MACH_FSG
 	help
 	  This option enables support for the LEDs on the Freecom FSG-3.
 
 config LEDS_WRAP
 	tristate "LED Support for the WRAP series LEDs"
+	depends on LEDS_CLASS
 	depends on SCx200_GPIO
 	help
 	  This option enables support for the PCEngines WRAP programmable LEDs.
 
 config LEDS_ALIX2
 	tristate "LED Support for ALIX.2 and ALIX.3 series"
+	depends on LEDS_CLASS
 	depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
 	help
 	  This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
@@ -98,12 +107,14 @@ config LEDS_ALIX2
 
 config LEDS_H1940
 	tristate "LED Support for iPAQ H1940 device"
+	depends on LEDS_CLASS
 	depends on ARCH_H1940
 	help
 	  This option enables support for the LEDs on the h1940.
 
 config LEDS_COBALT_QUBE
 	tristate "LED Support for the Cobalt Qube series front LED"
+	depends on LEDS_CLASS
 	depends on MIPS_COBALT
 	help
 	  This option enables support for the front LED on Cobalt Qube series
@@ -117,6 +128,7 @@ config LEDS_COBALT_RAQ
 
 config LEDS_SUNFIRE
 	tristate "LED support for SunFire servers."
+	depends on LEDS_CLASS
 	depends on SPARC64
 	select LEDS_TRIGGERS
 	help
@@ -125,6 +137,7 @@ config LEDS_SUNFIRE
 
 config LEDS_HP6XX
 	tristate "LED Support for the HP Jornada 6xx"
+	depends on LEDS_CLASS
 	depends on SH_HP6XX
 	help
 	  This option enables LED support for the handheld
@@ -132,6 +145,7 @@ config LEDS_HP6XX
 
 config LEDS_PCA9532
 	tristate "LED driver for PCA9532 dimmer"
+	depends on LEDS_CLASS
 	depends on I2C && INPUT && EXPERIMENTAL
 	help
 	  This option enables support for NXP pca9532
@@ -140,6 +154,7 @@ config LEDS_PCA9532
 
 config LEDS_GPIO
 	tristate "LED Support for GPIO connected LEDs"
+	depends on LEDS_CLASS
 	depends on GENERIC_GPIO
 	help
 	  This option enables support for the LEDs connected to GPIO
@@ -167,6 +182,7 @@ config LEDS_GPIO_OF
 
 config LEDS_LP3944
 	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
+	depends on LEDS_CLASS
 	depends on I2C
 	help
 	  This option enables support for LEDs connected to the National
@@ -176,8 +192,27 @@ config LEDS_LP3944
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-lp3944.
 
+config LEDS_LP5521
+	tristate "LED Support for N.S. LP5521 LED driver chip"
+	depends on LEDS_CLASS && I2C
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LP5521 LED driver. It is 3 channel chip with programmable engines.
+	  Driver provides direct control via LED class and interface for
+	  programming the engines.
+
+config LEDS_LP5523
+	tristate "LED Support for N.S. LP5523 LED driver chip"
+	depends on LEDS_CLASS && I2C
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LP5523 LED driver. It is 9 channel chip with programmable engines.
+	  Driver provides direct control via LED class and interface for
+	  programming the engines.
+
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook"
+	depends on LEDS_CLASS
 	depends on X86 && SERIO_I8042 && DMI
 	help
 	  This driver makes the mail LED accessible from userspace
@@ -208,6 +243,7 @@ config LEDS_CLEVO_MAIL
 
 config LEDS_PCA955X
 	tristate "LED Support for PCA955x I2C chips"
+	depends on LEDS_CLASS
 	depends on I2C
 	help
 	  This option enables support for LEDs connected to PCA955x
@@ -216,6 +252,7 @@ config LEDS_PCA955X
 
 config LEDS_WM831X_STATUS
 	tristate "LED support for status LEDs on WM831x PMICs"
+	depends on LEDS_CLASS
 	depends on MFD_WM831X
 	help
 	  This option enables support for the status LEDs of the WM831x
@@ -223,6 +260,7 @@ config LEDS_WM831X_STATUS
 
 config LEDS_WM8350
 	tristate "LED Support for WM8350 AudioPlus PMIC"
+	depends on LEDS_CLASS
 	depends on MFD_WM8350
 	help
 	  This option enables support for LEDs driven by the Wolfson
@@ -230,6 +268,7 @@ config LEDS_WM8350
 
 config LEDS_DA903X
 	tristate "LED Support for DA9030/DA9034 PMIC"
+	depends on LEDS_CLASS
 	depends on PMIC_DA903X
 	help
 	  This option enables support for on-chip LED drivers found
@@ -237,6 +276,7 @@ config LEDS_DA903X
 
 config LEDS_DAC124S085
 	tristate "LED Support for DAC124S085 SPI DAC"
+	depends on LEDS_CLASS
 	depends on SPI
 	help
 	  This option enables support for DAC124S085 SPI DAC from NatSemi,
@@ -244,18 +284,21 @@ config LEDS_DAC124S085
 
 config LEDS_PWM
 	tristate "PWM driven LED Support"
+	depends on LEDS_CLASS
 	depends on HAVE_PWM
 	help
 	  This option enables support for pwm driven LEDs
 
 config LEDS_REGULATOR
 	tristate "REGULATOR driven LED support"
+	depends on LEDS_CLASS
 	depends on REGULATOR
 	help
 	  This option enables support for regulator driven LEDs.
 
 config LEDS_BD2802
 	tristate "LED driver for BD2802 RGB LED"
+	depends on LEDS_CLASS
 	depends on I2C
 	help
 	  This option enables support for BD2802GU RGB LED driver chips
@@ -263,6 +306,7 @@ config LEDS_BD2802
 
 config LEDS_INTEL_SS4200
 	tristate "LED driver for Intel NAS SS4200 series"
+	depends on LEDS_CLASS
 	depends on PCI && DMI
 	help
 	  This option enables support for the Intel SS4200 series of
@@ -272,6 +316,7 @@ config LEDS_INTEL_SS4200
 
 config LEDS_LT3593
 	tristate "LED driver for LT3593 controllers"
+	depends on LEDS_CLASS
 	depends on GENERIC_GPIO
 	help
 	  This option enables support for LEDs driven by a Linear Technology
@@ -280,6 +325,7 @@ config LEDS_LT3593
 
 config LEDS_ADP5520
 	tristate "LED Support for ADP5520/ADP5501 PMIC"
+	depends on LEDS_CLASS
 	depends on PMIC_ADP5520
 	help
 	  This option enables support for on-chip LED drivers found
@@ -290,6 +336,7 @@ config LEDS_ADP5520
 
 config LEDS_DELL_NETBOOKS
 	tristate "External LED on Dell Business Netbooks"
+	depends on LEDS_CLASS
 	depends on X86 && ACPI_WMI
 	help
 	  This adds support for the Latitude 2100 and similar
@@ -297,6 +344,7 @@ config LEDS_DELL_NETBOOKS
 
 config LEDS_MC13783
 	tristate "LED Support for MC13783 PMIC"
+	depends on LEDS_CLASS
 	depends on MFD_MC13783
 	help
 	  This option enable support for on-chip LED drivers found
@@ -304,6 +352,7 @@ config LEDS_MC13783
 
 config LEDS_NS2
 	tristate "LED support for Network Space v2 GPIO LEDs"
+	depends on LEDS_CLASS
 	depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
 	default y
 	help
@@ -322,17 +371,17 @@ config LEDS_NETXBIG
 
 config LEDS_TRIGGERS
 	bool "LED Trigger support"
+	depends on LEDS_CLASS
 	help
 	  This option enables trigger support for the leds class.
 	  These triggers allow kernel events to drive the LEDs and can
 	  be configured via sysfs. If unsure, say Y.
 
-if LEDS_TRIGGERS
-
 comment "LED Triggers"
 
 config LEDS_TRIGGER_TIMER
 	tristate "LED Timer Trigger"
+	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by a programmable timer
 	  via sysfs. Some LED hardware can be programmed to start
@@ -344,12 +393,14 @@ config LEDS_TRIGGER_TIMER
 config LEDS_TRIGGER_IDE_DISK
 	bool "LED IDE Disk Trigger"
 	depends on IDE_GD_ATA
+	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by IDE disk activity.
 	  If unsure, say Y.
 
 config LEDS_TRIGGER_HEARTBEAT
 	tristate "LED Heartbeat Trigger"
+	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled by a CPU load average.
 	  The flash frequency is a hyperbolic function of the 1-minute
@@ -358,6 +409,7 @@ config LEDS_TRIGGER_HEARTBEAT
 
 config LEDS_TRIGGER_BACKLIGHT
 	tristate "LED backlight Trigger"
+	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be controlled as a backlight device: they
 	  turn off and on when the display is blanked and unblanked.
@@ -366,6 +418,7 @@ config LEDS_TRIGGER_BACKLIGHT
 
 config LEDS_TRIGGER_GPIO
 	tristate "LED GPIO Trigger"
+	depends on LEDS_TRIGGERS
 	depends on GPIOLIB
 	help
 	  This allows LEDs to be controlled by gpio events. It's good
@@ -378,6 +431,7 @@ config LEDS_TRIGGER_GPIO
 
 config LEDS_TRIGGER_DEFAULT_ON
 	tristate "LED Default ON Trigger"
+	depends on LEDS_TRIGGERS
 	help
 	  This allows LEDs to be initialised in the ON state.
 	  If unsure, say Y.
@@ -385,8 +439,4 @@ config LEDS_TRIGGER_DEFAULT_ON
 comment "iptables trigger is under Netfilter config (LED target)"
 	depends on LEDS_TRIGGERS
 
-endif # LEDS_TRIGGERS
-
-endif # LEDS_CLASS
-
 endif # NEW_LEDS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 9c96db40ef6..aae6989ff6b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -23,6 +23,8 @@ obj-$(CONFIG_LEDS_SUNFIRE)		+= leds-sunfire.o
 obj-$(CONFIG_LEDS_PCA9532)		+= leds-pca9532.o
 obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
 obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
+obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
+obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index 26066007650..d5a4ade8899 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -81,6 +81,79 @@ static struct device_attribute led_class_attrs[] = {
 	__ATTR_NULL,
 };
 
+static void led_timer_function(unsigned long data)
+{
+	struct led_classdev *led_cdev = (void *)data;
+	unsigned long brightness;
+	unsigned long delay;
+
+	if (!led_cdev->blink_delay_on || !led_cdev->blink_delay_off) {
+		led_set_brightness(led_cdev, LED_OFF);
+		return;
+	}
+
+	brightness = led_get_brightness(led_cdev);
+	if (!brightness) {
+		/* Time to switch the LED on. */
+		brightness = led_cdev->blink_brightness;
+		delay = led_cdev->blink_delay_on;
+	} else {
+		/* Store the current brightness value to be able
+		 * to restore it when the delay_off period is over.
+		 */
+		led_cdev->blink_brightness = brightness;
+		brightness = LED_OFF;
+		delay = led_cdev->blink_delay_off;
+	}
+
+	led_set_brightness(led_cdev, brightness);
+
+	mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay));
+}
+
+static void led_stop_software_blink(struct led_classdev *led_cdev)
+{
+	/* deactivate previous settings */
+	del_timer_sync(&led_cdev->blink_timer);
+	led_cdev->blink_delay_on = 0;
+	led_cdev->blink_delay_off = 0;
+}
+
+static void led_set_software_blink(struct led_classdev *led_cdev,
+				   unsigned long delay_on,
+				   unsigned long delay_off)
+{
+	int current_brightness;
+
+	current_brightness = led_get_brightness(led_cdev);
+	if (current_brightness)
+		led_cdev->blink_brightness = current_brightness;
+	if (!led_cdev->blink_brightness)
+		led_cdev->blink_brightness = led_cdev->max_brightness;
+
+	if (delay_on == led_cdev->blink_delay_on &&
+	    delay_off == led_cdev->blink_delay_off)
+		return;
+
+	led_stop_software_blink(led_cdev);
+
+	led_cdev->blink_delay_on = delay_on;
+	led_cdev->blink_delay_off = delay_off;
+
+	/* never on - don't blink */
+	if (!delay_on)
+		return;
+
+	/* never off - just set to brightness */
+	if (!delay_off) {
+		led_set_brightness(led_cdev, led_cdev->blink_brightness);
+		return;
+	}
+
+	mod_timer(&led_cdev->blink_timer, jiffies + 1);
+}
+
+
 /**
  * led_classdev_suspend - suspend an led_classdev.
  * @led_cdev: the led_classdev to suspend.
@@ -148,6 +221,10 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 
 	led_update_brightness(led_cdev);
 
+	init_timer(&led_cdev->blink_timer);
+	led_cdev->blink_timer.function = led_timer_function;
+	led_cdev->blink_timer.data = (unsigned long)led_cdev;
+
 #ifdef CONFIG_LEDS_TRIGGERS
 	led_trigger_set_default(led_cdev);
 #endif
@@ -157,7 +234,6 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 
 	return 0;
 }
-
 EXPORT_SYMBOL_GPL(led_classdev_register);
 
 /**
@@ -175,6 +251,9 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
 	up_write(&led_cdev->trigger_lock);
 #endif
 
+	/* Stop blinking */
+	led_brightness_set(led_cdev, LED_OFF);
+
 	device_unregister(led_cdev->dev);
 
 	down_write(&leds_list_lock);
@@ -183,6 +262,30 @@ void led_classdev_unregister(struct led_classdev *led_cdev)
 }
 EXPORT_SYMBOL_GPL(led_classdev_unregister);
 
+void led_blink_set(struct led_classdev *led_cdev,
+		   unsigned long *delay_on,
+		   unsigned long *delay_off)
+{
+	if (led_cdev->blink_set &&
+	    !led_cdev->blink_set(led_cdev, delay_on, delay_off))
+		return;
+
+	/* blink with 1 Hz as default if nothing specified */
+	if (!*delay_on && !*delay_off)
+		*delay_on = *delay_off = 500;
+
+	led_set_software_blink(led_cdev, *delay_on, *delay_off);
+}
+EXPORT_SYMBOL(led_blink_set);
+
+void led_brightness_set(struct led_classdev *led_cdev,
+			enum led_brightness brightness)
+{
+	led_stop_software_blink(led_cdev);
+	led_cdev->brightness_set(led_cdev, brightness);
+}
+EXPORT_SYMBOL(led_brightness_set);
+
 static int __init leds_init(void)
 {
 	leds_class = class_create(THIS_MODULE, "leds");
diff --git a/drivers/leds/led-triggers.c b/drivers/leds/led-triggers.c
index f1c00db88b5..c41eb6180c9 100644
--- a/drivers/leds/led-triggers.c
+++ b/drivers/leds/led-triggers.c
@@ -113,7 +113,7 @@ void led_trigger_set(struct led_classdev *led_cdev, struct led_trigger *trigger)
 		if (led_cdev->trigger->deactivate)
 			led_cdev->trigger->deactivate(led_cdev);
 		led_cdev->trigger = NULL;
-		led_set_brightness(led_cdev, LED_OFF);
+		led_brightness_set(led_cdev, LED_OFF);
 	}
 	if (trigger) {
 		write_lock_irqsave(&trigger->leddev_list_lock, flags);
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index ea57e05d08f..4d9fa38d9ff 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -316,7 +316,7 @@ static struct of_platform_driver of_gpio_leds_driver = {
 
 static int __init gpio_led_init(void)
 {
-	int ret;
+	int ret = 0;
 
 #ifdef CONFIG_LEDS_GPIO_PLATFORM	
 	ret = platform_driver_register(&gpio_led_driver);
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
new file mode 100644
index 00000000000..33facd0c45d
--- /dev/null
+++ b/drivers/leds/leds-lp5521.c
@@ -0,0 +1,837 @@
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5521.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5521_PROGRAM_LENGTH		32	/* in bytes */
+
+#define LP5521_MAX_LEDS			3	/* Maximum number of LEDs */
+#define LP5521_MAX_ENGINES		3	/* Maximum number of engines */
+
+#define LP5521_ENG_MASK_BASE		0x30	/* 00110000 */
+#define LP5521_ENG_STATUS_MASK		0x07	/* 00000111 */
+
+#define LP5521_CMD_LOAD			0x15	/* 00010101 */
+#define LP5521_CMD_RUN			0x2a	/* 00101010 */
+#define LP5521_CMD_DIRECT		0x3f	/* 00111111 */
+#define LP5521_CMD_DISABLED		0x00	/* 00000000 */
+
+/* Registers */
+#define LP5521_REG_ENABLE		0x00
+#define LP5521_REG_OP_MODE		0x01
+#define LP5521_REG_R_PWM		0x02
+#define LP5521_REG_G_PWM		0x03
+#define LP5521_REG_B_PWM		0x04
+#define LP5521_REG_R_CURRENT		0x05
+#define LP5521_REG_G_CURRENT		0x06
+#define LP5521_REG_B_CURRENT		0x07
+#define LP5521_REG_CONFIG		0x08
+#define LP5521_REG_R_CHANNEL_PC		0x09
+#define LP5521_REG_G_CHANNEL_PC		0x0A
+#define LP5521_REG_B_CHANNEL_PC		0x0B
+#define LP5521_REG_STATUS		0x0C
+#define LP5521_REG_RESET		0x0D
+#define LP5521_REG_GPO			0x0E
+#define LP5521_REG_R_PROG_MEM		0x10
+#define LP5521_REG_G_PROG_MEM		0x30
+#define LP5521_REG_B_PROG_MEM		0x50
+
+#define LP5521_PROG_MEM_BASE		LP5521_REG_R_PROG_MEM
+#define LP5521_PROG_MEM_SIZE		0x20
+
+/* Base register to set LED current */
+#define LP5521_REG_LED_CURRENT_BASE	LP5521_REG_R_CURRENT
+
+/* Base register to set the brightness */
+#define LP5521_REG_LED_PWM_BASE		LP5521_REG_R_PWM
+
+/* Bits in ENABLE register */
+#define LP5521_MASTER_ENABLE		0x40	/* Chip master enable */
+#define LP5521_LOGARITHMIC_PWM		0x80	/* Logarithmic PWM adjustment */
+#define LP5521_EXEC_RUN			0x2A
+
+/* Bits in CONFIG register */
+#define LP5521_PWM_HF			0x40	/* PWM: 0 = 256Hz, 1 = 558Hz */
+#define LP5521_PWRSAVE_EN		0x20	/* 1 = Power save mode */
+#define LP5521_CP_MODE_OFF		0	/* Charge pump (CP) off */
+#define LP5521_CP_MODE_BYPASS		8	/* CP forced to bypass mode */
+#define LP5521_CP_MODE_1X5		0x10	/* CP forced to 1.5x mode */
+#define LP5521_CP_MODE_AUTO		0x18	/* Automatic mode selection */
+#define LP5521_R_TO_BATT		4	/* R out: 0 = CP, 1 = Vbat */
+#define LP5521_CLK_SRC_EXT		0	/* Ext-clk source (CLK_32K) */
+#define LP5521_CLK_INT			1	/* Internal clock */
+#define LP5521_CLK_AUTO			2	/* Automatic clock selection */
+
+/* Status */
+#define LP5521_EXT_CLK_USED		0x08
+
+struct lp5521_engine {
+	const struct attribute_group *attributes;
+	int		id;
+	u8		mode;
+	u8		prog_page;
+	u8		engine_mask;
+};
+
+struct lp5521_led {
+	int			id;
+	u8			chan_nr;
+	u8			led_current;
+	u8			max_current;
+	struct led_classdev	cdev;
+	struct work_struct	brightness_work;
+	u8			brightness;
+};
+
+struct lp5521_chip {
+	struct lp5521_platform_data *pdata;
+	struct mutex		lock; /* Serialize control */
+	struct i2c_client	*client;
+	struct lp5521_engine	engines[LP5521_MAX_ENGINES];
+	struct lp5521_led	leds[LP5521_MAX_LEDS];
+	u8			num_channels;
+	u8			num_leds;
+};
+
+static inline struct lp5521_led *cdev_to_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct lp5521_led, cdev);
+}
+
+static inline struct lp5521_chip *engine_to_lp5521(struct lp5521_engine *engine)
+{
+	return container_of(engine, struct lp5521_chip,
+			    engines[engine->id - 1]);
+}
+
+static inline struct lp5521_chip *led_to_lp5521(struct lp5521_led *led)
+{
+	return container_of(led, struct lp5521_chip,
+			    leds[led->id]);
+}
+
+static void lp5521_led_brightness_work(struct work_struct *work);
+
+static inline int lp5521_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5521_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_byte_data(client, reg);
+	if (ret < 0)
+		return -EIO;
+
+	*buf = ret;
+	return 0;
+}
+
+static int lp5521_set_engine_mode(struct lp5521_engine *engine, u8 mode)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(engine);
+	struct i2c_client *client = chip->client;
+	int ret;
+	u8 engine_state;
+
+	/* Only transition between RUN and DIRECT mode are handled here */
+	if (mode == LP5521_CMD_LOAD)
+		return 0;
+
+	if (mode == LP5521_CMD_DISABLED)
+		mode = LP5521_CMD_DIRECT;
+
+	ret = lp5521_read(client, LP5521_REG_OP_MODE, &engine_state);
+
+	/* set mode only for this engine */
+	engine_state &= ~(engine->engine_mask);
+	mode &= engine->engine_mask;
+	engine_state |= mode;
+	ret |= lp5521_write(client, LP5521_REG_OP_MODE, engine_state);
+
+	return ret;
+}
+
+static int lp5521_load_program(struct lp5521_engine *eng, const u8 *pattern)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(eng);
+	struct i2c_client *client = chip->client;
+	int ret;
+	int addr;
+	u8 mode;
+
+	/* move current engine to direct mode and remember the state */
+	ret = lp5521_set_engine_mode(eng, LP5521_CMD_DIRECT);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
+	ret |= lp5521_read(client, LP5521_REG_OP_MODE, &mode);
+
+	/* For loading, all the engines to load mode */
+	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
+	lp5521_write(client, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
+	/* Mode change requires min 500 us delay. 1 - 2 ms  with margin */
+	usleep_range(1000, 2000);
+
+	addr = LP5521_PROG_MEM_BASE + eng->prog_page * LP5521_PROG_MEM_SIZE;
+	i2c_smbus_write_i2c_block_data(client,
+				addr,
+				LP5521_PROG_MEM_SIZE,
+				pattern);
+
+	ret |= lp5521_write(client, LP5521_REG_OP_MODE, mode);
+	return ret;
+}
+
+static int lp5521_set_led_current(struct lp5521_chip *chip, int led, u8 curr)
+{
+	return lp5521_write(chip->client,
+		    LP5521_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+		    curr);
+}
+
+static void lp5521_init_engine(struct lp5521_chip *chip,
+			const struct attribute_group *attr_group)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+		chip->engines[i].id = i + 1;
+		chip->engines[i].engine_mask = LP5521_ENG_MASK_BASE >> (i * 2);
+		chip->engines[i].prog_page = i;
+		chip->engines[i].attributes = &attr_group[i];
+	}
+}
+
+static int lp5521_configure(struct i2c_client *client,
+			const struct attribute_group *attr_group)
+{
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	int ret;
+
+	lp5521_init_engine(chip, attr_group);
+
+	/* Set all PWMs to direct control mode */
+	ret = lp5521_write(client, LP5521_REG_OP_MODE, 0x3F);
+
+	/* Enable auto-powersave, set charge pump to auto, red to battery */
+	ret |= lp5521_write(client, LP5521_REG_CONFIG,
+		LP5521_PWRSAVE_EN | LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT);
+
+	/* Initialize all channels PWM to zero -> leds off */
+	ret |= lp5521_write(client, LP5521_REG_R_PWM, 0);
+	ret |= lp5521_write(client, LP5521_REG_G_PWM, 0);
+	ret |= lp5521_write(client, LP5521_REG_B_PWM, 0);
+
+	/* Set engines are set to run state when OP_MODE enables engines */
+	ret |= lp5521_write(client, LP5521_REG_ENABLE,
+			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
+			LP5521_EXEC_RUN);
+	/* enable takes 500us. 1 - 2 ms leaves some margin */
+	usleep_range(1000, 2000);
+
+	return ret;
+}
+
+static int lp5521_run_selftest(struct lp5521_chip *chip, char *buf)
+{
+	int ret;
+	u8 status;
+
+	ret = lp5521_read(chip->client, LP5521_REG_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	/* Check that ext clock is really in use if requested */
+	if (chip->pdata && chip->pdata->clock_mode == LP5521_CLOCK_EXT)
+		if  ((status & LP5521_EXT_CLK_USED) == 0)
+			return -EIO;
+	return 0;
+}
+
+static void lp5521_set_brightness(struct led_classdev *cdev,
+			     enum led_brightness brightness)
+{
+	struct lp5521_led *led = cdev_to_led(cdev);
+	led->brightness = (u8)brightness;
+	schedule_work(&led->brightness_work);
+}
+
+static void lp5521_led_brightness_work(struct work_struct *work)
+{
+	struct lp5521_led *led = container_of(work,
+					      struct lp5521_led,
+					      brightness_work);
+	struct lp5521_chip *chip = led_to_lp5521(led);
+	struct i2c_client *client = chip->client;
+
+	mutex_lock(&chip->lock);
+	lp5521_write(client, LP5521_REG_LED_PWM_BASE + led->chan_nr,
+		led->brightness);
+	mutex_unlock(&chip->lock);
+}
+
+/* Detect the chip by setting its ENABLE register and reading it back. */
+static int lp5521_detect(struct i2c_client *client)
+{
+	int ret;
+	u8 buf;
+
+	ret = lp5521_write(client, LP5521_REG_ENABLE,
+			LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
+	if (ret)
+		return ret;
+	/* enable takes 500us. 1 - 2 ms leaves some margin */
+	usleep_range(1000, 2000);
+	ret = lp5521_read(client, LP5521_REG_ENABLE, &buf);
+	if (ret)
+		return ret;
+	if (buf != (LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM))
+		return -ENODEV;
+
+	return 0;
+}
+
+/* Set engine mode and create appropriate sysfs attributes, if required. */
+static int lp5521_set_mode(struct lp5521_engine *engine, u8 mode)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(engine);
+	struct i2c_client *client = chip->client;
+	struct device *dev = &client->dev;
+	int ret = 0;
+
+	/* if in that mode already do nothing, except for run */
+	if (mode == engine->mode && mode != LP5521_CMD_RUN)
+		return 0;
+
+	if (mode == LP5521_CMD_RUN) {
+		ret = lp5521_set_engine_mode(engine, LP5521_CMD_RUN);
+	} else if (mode == LP5521_CMD_LOAD) {
+		lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+		lp5521_set_engine_mode(engine, LP5521_CMD_LOAD);
+
+		ret = sysfs_create_group(&dev->kobj, engine->attributes);
+		if (ret)
+			return ret;
+	} else if (mode == LP5521_CMD_DISABLED) {
+		lp5521_set_engine_mode(engine, LP5521_CMD_DISABLED);
+	}
+
+	/* remove load attribute from sysfs if not in load mode */
+	if (engine->mode == LP5521_CMD_LOAD && mode != LP5521_CMD_LOAD)
+		sysfs_remove_group(&dev->kobj, engine->attributes);
+
+	engine->mode = mode;
+
+	return ret;
+}
+
+static int lp5521_do_store_load(struct lp5521_engine *engine,
+				const char *buf, size_t len)
+{
+	struct lp5521_chip *chip = engine_to_lp5521(engine);
+	struct i2c_client *client = chip->client;
+	int  ret, nrchars, offset = 0, i = 0;
+	char c[3];
+	unsigned cmd;
+	u8 pattern[LP5521_PROGRAM_LENGTH] = {0};
+
+	while ((offset < len - 1) && (i < LP5521_PROGRAM_LENGTH)) {
+		/* separate sscanfs because length is working only for %s */
+		ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+		ret = sscanf(c, "%2x", &cmd);
+		if (ret != 1)
+			goto fail;
+		pattern[i] = (u8)cmd;
+
+		offset += nrchars;
+		i++;
+	}
+
+	/* Each instruction is 16bit long. Check that length is even */
+	if (i % 2)
+		goto fail;
+
+	mutex_lock(&chip->lock);
+	ret = lp5521_load_program(engine, pattern);
+	mutex_unlock(&chip->lock);
+
+	if (ret) {
+		dev_err(&client->dev, "failed loading pattern\n");
+		return ret;
+	}
+
+	return len;
+fail:
+	dev_err(&client->dev, "wrong pattern format\n");
+	return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	return lp5521_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr)							\
+static ssize_t store_engine##nr##_load(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_load(dev, attr, buf, len, nr);		\
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+				struct device_attribute *attr,
+				char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	switch (chip->engines[nr - 1].mode) {
+	case LP5521_CMD_RUN:
+		return sprintf(buf, "run\n");
+	case LP5521_CMD_LOAD:
+		return sprintf(buf, "load\n");
+	case LP5521_CMD_DISABLED:
+		return sprintf(buf, "disabled\n");
+	default:
+		return sprintf(buf, "disabled\n");
+	}
+}
+
+#define show_mode(nr)							\
+static ssize_t show_engine##nr##_mode(struct device *dev,		\
+				    struct device_attribute *attr,	\
+				    char *buf)				\
+{									\
+	return show_engine_mode(dev, attr, buf, nr);			\
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	struct lp5521_engine *engine = &chip->engines[nr - 1];
+	mutex_lock(&chip->lock);
+
+	if (!strncmp(buf, "run", 3))
+		lp5521_set_mode(engine, LP5521_CMD_RUN);
+	else if (!strncmp(buf, "load", 4))
+		lp5521_set_mode(engine, LP5521_CMD_LOAD);
+	else if (!strncmp(buf, "disabled", 8))
+		lp5521_set_mode(engine, LP5521_CMD_DISABLED);
+
+	mutex_unlock(&chip->lock);
+	return len;
+}
+
+#define store_mode(nr)							\
+static ssize_t store_engine##nr##_mode(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_mode(dev, attr, buf, len, nr);		\
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5521_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5521_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5521_led *led = cdev_to_led(led_cdev);
+	struct lp5521_chip *chip = led_to_lp5521(led);
+	ssize_t ret;
+	unsigned long curr;
+
+	if (strict_strtoul(buf, 0, &curr))
+		return -EINVAL;
+
+	if (curr > led->max_current)
+		return -EINVAL;
+
+	mutex_lock(&chip->lock);
+	ret = lp5521_set_led_current(chip, led->id, curr);
+	mutex_unlock(&chip->lock);
+
+	if (ret < 0)
+		return ret;
+
+	led->led_current = (u8)curr;
+
+	return len;
+}
+
+static ssize_t lp5521_selftest(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = lp5521_run_selftest(chip, buf);
+	mutex_unlock(&chip->lock);
+	return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5521_led_attributes[] = {
+	&dev_attr_led_current.attr,
+	&dev_attr_max_current.attr,
+	NULL,
+};
+
+static struct attribute_group lp5521_led_attribute_group = {
+	.attrs = lp5521_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
+		   show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
+		   show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
+		   show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL);
+
+static struct attribute *lp5521_attributes[] = {
+	&dev_attr_engine1_mode.attr,
+	&dev_attr_engine2_mode.attr,
+	&dev_attr_engine3_mode.attr,
+	&dev_attr_selftest.attr,
+	NULL
+};
+
+static struct attribute *lp5521_engine1_attributes[] = {
+	&dev_attr_engine1_load.attr,
+	NULL
+};
+
+static struct attribute *lp5521_engine2_attributes[] = {
+	&dev_attr_engine2_load.attr,
+	NULL
+};
+
+static struct attribute *lp5521_engine3_attributes[] = {
+	&dev_attr_engine3_load.attr,
+	NULL
+};
+
+static const struct attribute_group lp5521_group = {
+	.attrs = lp5521_attributes,
+};
+
+static const struct attribute_group lp5521_engine_group[] = {
+	{.attrs = lp5521_engine1_attributes },
+	{.attrs = lp5521_engine2_attributes },
+	{.attrs = lp5521_engine3_attributes },
+};
+
+static int lp5521_register_sysfs(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	return sysfs_create_group(&dev->kobj, &lp5521_group);
+}
+
+static void lp5521_unregister_sysfs(struct i2c_client *client)
+{
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
+	int i;
+
+	sysfs_remove_group(&dev->kobj, &lp5521_group);
+
+	for (i = 0; i <  ARRAY_SIZE(chip->engines); i++) {
+		if (chip->engines[i].mode == LP5521_CMD_LOAD)
+			sysfs_remove_group(&dev->kobj,
+					chip->engines[i].attributes);
+	}
+
+	for (i = 0; i < chip->num_leds; i++)
+		sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+				&lp5521_led_attribute_group);
+}
+
+static int __init lp5521_init_led(struct lp5521_led *led,
+				struct i2c_client *client,
+				int chan, struct lp5521_platform_data *pdata)
+{
+	struct device *dev = &client->dev;
+	char name[32];
+	int res;
+
+	if (chan >= LP5521_MAX_LEDS)
+		return -EINVAL;
+
+	if (pdata->led_config[chan].led_current == 0)
+		return 0;
+
+	led->led_current = pdata->led_config[chan].led_current;
+	led->max_current = pdata->led_config[chan].max_current;
+	led->chan_nr = pdata->led_config[chan].chan_nr;
+
+	if (led->chan_nr >= LP5521_MAX_LEDS) {
+		dev_err(dev, "Use channel numbers between 0 and %d\n",
+			LP5521_MAX_LEDS - 1);
+		return -EINVAL;
+	}
+
+	snprintf(name, sizeof(name), "%s:channel%d", client->name, chan);
+	led->cdev.brightness_set = lp5521_set_brightness;
+	led->cdev.name = name;
+	res = led_classdev_register(dev, &led->cdev);
+	if (res < 0) {
+		dev_err(dev, "couldn't register led on channel %d\n", chan);
+		return res;
+	}
+
+	res = sysfs_create_group(&led->cdev.dev->kobj,
+			&lp5521_led_attribute_group);
+	if (res < 0) {
+		dev_err(dev, "couldn't register current attribute\n");
+		led_classdev_unregister(&led->cdev);
+		return res;
+	}
+	return 0;
+}
+
+static int lp5521_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct lp5521_chip		*chip;
+	struct lp5521_platform_data	*pdata;
+	int ret, i, led;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+	chip->client = client;
+
+	pdata = client->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data\n");
+		ret = -EINVAL;
+		goto fail1;
+	}
+
+	mutex_init(&chip->lock);
+
+	chip->pdata   = pdata;
+
+	if (pdata->setup_resources) {
+		ret = pdata->setup_resources();
+		if (ret < 0)
+			goto fail1;
+	}
+
+	if (pdata->enable) {
+		pdata->enable(0);
+		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
+		pdata->enable(1);
+		usleep_range(1000, 2000); /* 500us abs min. */
+	}
+
+	lp5521_write(client, LP5521_REG_RESET, 0xff);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
+	ret = lp5521_detect(client);
+
+	if (ret) {
+		dev_err(&client->dev, "Chip not found\n");
+		goto fail2;
+	}
+
+	dev_info(&client->dev, "%s programmable led chip found\n", id->name);
+
+	ret = lp5521_configure(client, lp5521_engine_group);
+	if (ret < 0) {
+		dev_err(&client->dev, "error configuring chip\n");
+		goto fail2;
+	}
+
+	/* Initialize leds */
+	chip->num_channels = pdata->num_channels;
+	chip->num_leds = 0;
+	led = 0;
+	for (i = 0; i < pdata->num_channels; i++) {
+		/* Do not initialize channels that are not connected */
+		if (pdata->led_config[i].led_current == 0)
+			continue;
+
+		ret = lp5521_init_led(&chip->leds[led], client, i, pdata);
+		if (ret) {
+			dev_err(&client->dev, "error initializing leds\n");
+			goto fail3;
+		}
+		chip->num_leds++;
+
+		chip->leds[led].id = led;
+		/* Set initial LED current */
+		lp5521_set_led_current(chip, led,
+				chip->leds[led].led_current);
+
+		INIT_WORK(&(chip->leds[led].brightness_work),
+			lp5521_led_brightness_work);
+
+		led++;
+	}
+
+	ret = lp5521_register_sysfs(client);
+	if (ret) {
+		dev_err(&client->dev, "registering sysfs failed\n");
+		goto fail3;
+	}
+	return ret;
+fail3:
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+fail2:
+	if (pdata->enable)
+		pdata->enable(0);
+	if (pdata->release_resources)
+		pdata->release_resources();
+fail1:
+	kfree(chip);
+	return ret;
+}
+
+static int lp5521_remove(struct i2c_client *client)
+{
+	struct lp5521_chip *chip = i2c_get_clientdata(client);
+	int i;
+
+	lp5521_unregister_sysfs(client);
+
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+
+	if (chip->pdata->enable)
+		chip->pdata->enable(0);
+	if (chip->pdata->release_resources)
+		chip->pdata->release_resources();
+	kfree(chip);
+	return 0;
+}
+
+static const struct i2c_device_id lp5521_id[] = {
+	{ "lp5521", 0 }, /* Three channel chip */
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lp5521_id);
+
+static struct i2c_driver lp5521_driver = {
+	.driver = {
+		.name	= "lp5521",
+	},
+	.probe		= lp5521_probe,
+	.remove		= lp5521_remove,
+	.id_table	= lp5521_id,
+};
+
+static int __init lp5521_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&lp5521_driver);
+
+	if (ret < 0)
+		printk(KERN_ALERT "Adding lp5521 driver failed\n");
+
+	return ret;
+}
+
+static void __exit lp5521_exit(void)
+{
+	i2c_del_driver(&lp5521_driver);
+}
+
+module_init(lp5521_init);
+module_exit(lp5521_exit);
+
+MODULE_AUTHOR("Mathias Nyman, Yuri Zaporozhets, Samu Onkalo");
+MODULE_DESCRIPTION("LP5521 LED engine");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
new file mode 100644
index 00000000000..0cc4ead2fd8
--- /dev/null
+++ b/drivers/leds/leds-lp5523.c
@@ -0,0 +1,1069 @@
+/*
+ * lp5523.c - LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/leds.h>
+#include <linux/leds-lp5523.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#define LP5523_REG_ENABLE		0x00
+#define LP5523_REG_OP_MODE		0x01
+#define LP5523_REG_RATIOMETRIC_MSB	0x02
+#define LP5523_REG_RATIOMETRIC_LSB	0x03
+#define LP5523_REG_ENABLE_LEDS_MSB	0x04
+#define LP5523_REG_ENABLE_LEDS_LSB	0x05
+#define LP5523_REG_LED_CNTRL_BASE	0x06
+#define LP5523_REG_LED_PWM_BASE		0x16
+#define LP5523_REG_LED_CURRENT_BASE	0x26
+#define LP5523_REG_CONFIG		0x36
+#define LP5523_REG_CHANNEL1_PC		0x37
+#define LP5523_REG_CHANNEL2_PC		0x38
+#define LP5523_REG_CHANNEL3_PC		0x39
+#define LP5523_REG_STATUS		0x3a
+#define LP5523_REG_GPO			0x3b
+#define LP5523_REG_VARIABLE		0x3c
+#define LP5523_REG_RESET		0x3d
+#define LP5523_REG_TEMP_CTRL		0x3e
+#define LP5523_REG_TEMP_READ		0x3f
+#define LP5523_REG_TEMP_WRITE		0x40
+#define LP5523_REG_LED_TEST_CTRL	0x41
+#define LP5523_REG_LED_TEST_ADC		0x42
+#define LP5523_REG_ENG1_VARIABLE	0x45
+#define LP5523_REG_ENG2_VARIABLE	0x46
+#define LP5523_REG_ENG3_VARIABLE	0x47
+#define LP5523_REG_MASTER_FADER1	0x48
+#define LP5523_REG_MASTER_FADER2	0x49
+#define LP5523_REG_MASTER_FADER3	0x4a
+#define LP5523_REG_CH1_PROG_START	0x4c
+#define LP5523_REG_CH2_PROG_START	0x4d
+#define LP5523_REG_CH3_PROG_START	0x4e
+#define LP5523_REG_PROG_PAGE_SEL	0x4f
+#define LP5523_REG_PROG_MEM		0x50
+
+#define LP5523_CMD_LOAD			0x15 /* 00010101 */
+#define LP5523_CMD_RUN			0x2a /* 00101010 */
+#define LP5523_CMD_DISABLED		0x00 /* 00000000 */
+
+#define LP5523_ENABLE			0x40
+#define LP5523_AUTO_INC			0x40
+#define LP5523_PWR_SAVE			0x20
+#define LP5523_PWM_PWR_SAVE		0x04
+#define LP5523_CP_1			0x08
+#define LP5523_CP_1_5			0x10
+#define LP5523_CP_AUTO			0x18
+#define LP5523_INT_CLK			0x01
+#define LP5523_AUTO_CLK			0x02
+#define LP5523_EN_LEDTEST		0x80
+#define LP5523_LEDTEST_DONE		0x80
+
+#define LP5523_DEFAULT_CURRENT		50 /* microAmps */
+#define LP5523_PROGRAM_LENGTH		32 /* in bytes */
+#define LP5523_PROGRAM_PAGES		6
+#define LP5523_ADC_SHORTCIRC_LIM	80
+
+#define LP5523_LEDS			9
+#define LP5523_ENGINES			3
+
+#define LP5523_ENG_MASK_BASE		0x30 /* 00110000 */
+
+#define LP5523_ENG_STATUS_MASK          0x07 /* 00000111 */
+
+#define LP5523_IRQ_FLAGS                IRQF_TRIGGER_FALLING
+
+#define LP5523_EXT_CLK_USED		0x08
+
+#define LED_ACTIVE(mux, led)		(!!(mux & (0x0001 << led)))
+#define SHIFT_MASK(id)			(((id) - 1) * 2)
+
+struct lp5523_engine {
+	const struct attribute_group *attributes;
+	int		id;
+	u8		mode;
+	u8		prog_page;
+	u8		mux_page;
+	u16		led_mux;
+	u8		engine_mask;
+};
+
+struct lp5523_led {
+	int			id;
+	u8			chan_nr;
+	u8			led_current;
+	u8			max_current;
+	struct led_classdev     cdev;
+	struct work_struct	brightness_work;
+	u8			brightness;
+};
+
+struct lp5523_chip {
+	struct mutex		lock; /* Serialize control */
+	struct i2c_client	*client;
+	struct lp5523_engine	engines[LP5523_ENGINES];
+	struct lp5523_led	leds[LP5523_LEDS];
+	struct lp5523_platform_data *pdata;
+	u8			num_channels;
+	u8			num_leds;
+};
+
+static inline struct lp5523_led *cdev_to_led(struct led_classdev *cdev)
+{
+	return container_of(cdev, struct lp5523_led, cdev);
+}
+
+static inline struct lp5523_chip *engine_to_lp5523(struct lp5523_engine *engine)
+{
+	return container_of(engine, struct lp5523_chip,
+			    engines[engine->id - 1]);
+}
+
+static inline struct lp5523_chip *led_to_lp5523(struct lp5523_led *led)
+{
+	return container_of(led, struct lp5523_chip,
+			    leds[led->id]);
+}
+
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode);
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern);
+
+static void lp5523_led_brightness_work(struct work_struct *work);
+
+static int lp5523_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static int lp5523_read(struct i2c_client *client, u8 reg, u8 *buf)
+{
+	s32 ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		return -EIO;
+
+	*buf = ret;
+	return 0;
+}
+
+static int lp5523_detect(struct i2c_client *client)
+{
+	int ret;
+	u8 buf;
+
+	ret = lp5523_write(client, LP5523_REG_ENABLE, 0x40);
+	if (ret)
+		return ret;
+	ret = lp5523_read(client, LP5523_REG_ENABLE, &buf);
+	if (ret)
+		return ret;
+	if (buf == 0x40)
+		return 0;
+	else
+		return -ENODEV;
+}
+
+static int lp5523_configure(struct i2c_client *client)
+{
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	int ret = 0;
+	u8 status;
+
+	/* one pattern per engine setting led mux start and stop addresses */
+	u8 pattern[][LP5523_PROGRAM_LENGTH] =  {
+		{ 0x9c, 0x30, 0x9c, 0xb0, 0x9d, 0x80, 0xd8, 0x00, 0},
+		{ 0x9c, 0x40, 0x9c, 0xc0, 0x9d, 0x80, 0xd8, 0x00, 0},
+		{ 0x9c, 0x50, 0x9c, 0xd0, 0x9d, 0x80, 0xd8, 0x00, 0},
+	};
+
+	ret |= lp5523_write(client, LP5523_REG_ENABLE, LP5523_ENABLE);
+	/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
+	usleep_range(1000, 2000);
+
+	ret |= lp5523_write(client, LP5523_REG_CONFIG,
+			    LP5523_AUTO_INC | LP5523_PWR_SAVE |
+			    LP5523_CP_AUTO | LP5523_AUTO_CLK |
+			    LP5523_PWM_PWR_SAVE);
+
+	/* turn on all leds */
+	ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_MSB, 0x01);
+	ret |= lp5523_write(client, LP5523_REG_ENABLE_LEDS_LSB, 0xff);
+
+	/* hardcode 32 bytes of memory for each engine from program memory */
+	ret |= lp5523_write(client, LP5523_REG_CH1_PROG_START, 0x00);
+	ret |= lp5523_write(client, LP5523_REG_CH2_PROG_START, 0x10);
+	ret |= lp5523_write(client, LP5523_REG_CH3_PROG_START, 0x20);
+
+	/* write led mux address space for each channel */
+	ret |= lp5523_load_program(&chip->engines[0], pattern[0]);
+	ret |= lp5523_load_program(&chip->engines[1], pattern[1]);
+	ret |= lp5523_load_program(&chip->engines[2], pattern[2]);
+
+	if (ret) {
+		dev_err(&client->dev, "could not load mux programs\n");
+		return -1;
+	}
+
+	/* set all engines exec state and mode to run 00101010 */
+	ret |= lp5523_write(client, LP5523_REG_ENABLE,
+			    (LP5523_CMD_RUN | LP5523_ENABLE));
+
+	ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_RUN);
+
+	if (ret) {
+		dev_err(&client->dev, "could not start mux programs\n");
+		return -1;
+	}
+
+	/* Let the programs run for couple of ms and check the engine status */
+	usleep_range(3000, 6000);
+	lp5523_read(client, LP5523_REG_STATUS, &status);
+	status &= LP5523_ENG_STATUS_MASK;
+
+	if (status == LP5523_ENG_STATUS_MASK) {
+		dev_dbg(&client->dev, "all engines configured\n");
+	} else {
+		dev_info(&client->dev, "status == %x\n", status);
+		dev_err(&client->dev, "cound not configure LED engine\n");
+		return -1;
+	}
+
+	dev_info(&client->dev, "disabling engines\n");
+
+	ret |= lp5523_write(client, LP5523_REG_OP_MODE, LP5523_CMD_DISABLED);
+
+	return ret;
+}
+
+static int lp5523_set_engine_mode(struct lp5523_engine *engine, u8 mode)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int ret;
+	u8 engine_state;
+
+	ret = lp5523_read(client, LP5523_REG_OP_MODE, &engine_state);
+	if (ret)
+		goto fail;
+
+	engine_state &= ~(engine->engine_mask);
+
+	/* set mode only for this engine */
+	mode &= engine->engine_mask;
+
+	engine_state |= mode;
+
+	ret |= lp5523_write(client, LP5523_REG_OP_MODE, engine_state);
+fail:
+	return ret;
+}
+
+static int lp5523_load_mux(struct lp5523_engine *engine, u16 mux)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int ret = 0;
+
+	ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+	ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL, engine->mux_page);
+	ret |= lp5523_write(client, LP5523_REG_PROG_MEM,
+			    (u8)(mux >> 8));
+	ret |= lp5523_write(client, LP5523_REG_PROG_MEM + 1, (u8)(mux));
+	engine->led_mux = mux;
+
+	return ret;
+}
+
+static int lp5523_load_program(struct lp5523_engine *engine, u8 *pattern)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+
+	int ret = 0;
+
+	ret |= lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+	ret |= lp5523_write(client, LP5523_REG_PROG_PAGE_SEL,
+			    engine->prog_page);
+	ret |= i2c_smbus_write_i2c_block_data(client, LP5523_REG_PROG_MEM,
+					      LP5523_PROGRAM_LENGTH, pattern);
+
+	return ret;
+}
+
+static int lp5523_run_program(struct lp5523_engine *engine)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = lp5523_write(client, LP5523_REG_ENABLE,
+					LP5523_CMD_RUN | LP5523_ENABLE);
+	if (ret)
+		goto fail;
+
+	ret = lp5523_set_engine_mode(engine, LP5523_CMD_RUN);
+fail:
+	return ret;
+}
+
+static int lp5523_mux_parse(const char *buf, u16 *mux, size_t len)
+{
+	int i;
+	u16 tmp_mux = 0;
+	len = len < LP5523_LEDS ? len : LP5523_LEDS;
+	for (i = 0; i < len; i++) {
+		switch (buf[i]) {
+		case '1':
+			tmp_mux |= (1 << i);
+			break;
+		case '0':
+			break;
+		case '\n':
+			i = len;
+			break;
+		default:
+			return -1;
+		}
+	}
+	*mux = tmp_mux;
+
+	return 0;
+}
+
+static void lp5523_mux_to_array(u16 led_mux, char *array)
+{
+	int i, pos = 0;
+	for (i = 0; i < LP5523_LEDS; i++)
+		pos += sprintf(array + pos, "%x", LED_ACTIVE(led_mux, i));
+
+	array[pos] = '\0';
+}
+
+/*--------------------------------------------------------------*/
+/*			Sysfs interface				*/
+/*--------------------------------------------------------------*/
+
+static ssize_t show_engine_leds(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	char mux[LP5523_LEDS + 1];
+
+	lp5523_mux_to_array(chip->engines[nr - 1].led_mux, mux);
+
+	return sprintf(buf, "%s\n", mux);
+}
+
+#define show_leds(nr)							\
+static ssize_t show_engine##nr##_leds(struct device *dev,		\
+			    struct device_attribute *attr,		\
+			    char *buf)					\
+{									\
+	return show_engine_leds(dev, attr, buf, nr);			\
+}
+show_leds(1)
+show_leds(2)
+show_leds(3)
+
+static ssize_t store_engine_leds(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	u16 mux = 0;
+
+	if (lp5523_mux_parse(buf, &mux, len))
+		return -EINVAL;
+
+	if (lp5523_load_mux(&chip->engines[nr - 1], mux))
+		return -EINVAL;
+
+	return len;
+}
+
+#define store_leds(nr)						\
+static ssize_t store_engine##nr##_leds(struct device *dev,	\
+			     struct device_attribute *attr,	\
+			     const char *buf, size_t len)	\
+{								\
+	return store_engine_leds(dev, attr, buf, len, nr);	\
+}
+store_leds(1)
+store_leds(2)
+store_leds(3)
+
+static ssize_t lp5523_selftest(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	int i, ret, pos = 0;
+	int led = 0;
+	u8 status, adc, vdd;
+
+	mutex_lock(&chip->lock);
+
+	ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+	if (ret < 0)
+		goto fail;
+
+	/* Check that ext clock is really in use if requested */
+	if ((chip->pdata) && (chip->pdata->clock_mode == LP5523_CLOCK_EXT))
+		if  ((status & LP5523_EXT_CLK_USED) == 0)
+			goto fail;
+
+	/* Measure VDD (i.e. VBAT) first (channel 16 corresponds to VDD) */
+	lp5523_write(chip->client, LP5523_REG_LED_TEST_CTRL,
+				    LP5523_EN_LEDTEST | 16);
+	usleep_range(3000, 6000); /* ADC conversion time is typically 2.7 ms */
+	ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+	if (!(status & LP5523_LEDTEST_DONE))
+		usleep_range(3000, 6000); /* Was not ready. Wait little bit */
+
+	ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &vdd);
+	vdd--;	/* There may be some fluctuation in measurement */
+
+	for (i = 0; i < LP5523_LEDS; i++) {
+		/* Skip non-existing channels */
+		if (chip->pdata->led_config[i].led_current == 0)
+			continue;
+
+		/* Set default current */
+		lp5523_write(chip->client,
+			LP5523_REG_LED_CURRENT_BASE + i,
+			chip->pdata->led_config[i].led_current);
+
+		lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0xff);
+		/* let current stabilize 2 - 4ms before measurements start */
+		usleep_range(2000, 4000);
+		lp5523_write(chip->client,
+			     LP5523_REG_LED_TEST_CTRL,
+			     LP5523_EN_LEDTEST | i);
+		/* ADC conversion time is 2.7 ms typically */
+		usleep_range(3000, 6000);
+		ret = lp5523_read(chip->client, LP5523_REG_STATUS, &status);
+		if (!(status & LP5523_LEDTEST_DONE))
+			usleep_range(3000, 6000);/* Was not ready. Wait. */
+		ret |= lp5523_read(chip->client, LP5523_REG_LED_TEST_ADC, &adc);
+
+		if (adc >= vdd || adc < LP5523_ADC_SHORTCIRC_LIM)
+			pos += sprintf(buf + pos, "LED %d FAIL\n", i);
+
+		lp5523_write(chip->client, LP5523_REG_LED_PWM_BASE + i, 0x00);
+
+		/* Restore current */
+		lp5523_write(chip->client,
+			LP5523_REG_LED_CURRENT_BASE + i,
+			chip->leds[led].led_current);
+		led++;
+	}
+	if (pos == 0)
+		pos = sprintf(buf, "OK\n");
+	goto release_lock;
+fail:
+	pos = sprintf(buf, "FAIL\n");
+
+release_lock:
+	mutex_unlock(&chip->lock);
+
+	return pos;
+}
+
+static void lp5523_set_brightness(struct led_classdev *cdev,
+			     enum led_brightness brightness)
+{
+	struct lp5523_led *led = cdev_to_led(cdev);
+
+	led->brightness = (u8)brightness;
+
+	schedule_work(&led->brightness_work);
+}
+
+static void lp5523_led_brightness_work(struct work_struct *work)
+{
+	struct lp5523_led *led = container_of(work,
+					      struct lp5523_led,
+					      brightness_work);
+	struct lp5523_chip *chip = led_to_lp5523(led);
+	struct i2c_client *client = chip->client;
+
+	mutex_lock(&chip->lock);
+
+	lp5523_write(client, LP5523_REG_LED_PWM_BASE + led->chan_nr,
+		     led->brightness);
+
+	mutex_unlock(&chip->lock);
+}
+
+static int lp5523_do_store_load(struct lp5523_engine *engine,
+				const char *buf, size_t len)
+{
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	int  ret, nrchars, offset = 0, i = 0;
+	char c[3];
+	unsigned cmd;
+	u8 pattern[LP5523_PROGRAM_LENGTH] = {0};
+
+	while ((offset < len - 1) && (i < LP5523_PROGRAM_LENGTH)) {
+		/* separate sscanfs because length is working only for %s */
+		ret = sscanf(buf + offset, "%2s%n ", c, &nrchars);
+		ret = sscanf(c, "%2x", &cmd);
+		if (ret != 1)
+			goto fail;
+		pattern[i] = (u8)cmd;
+
+		offset += nrchars;
+		i++;
+	}
+
+	/* Each instruction is 16bit long. Check that length is even */
+	if (i % 2)
+		goto fail;
+
+	mutex_lock(&chip->lock);
+
+	ret = lp5523_load_program(engine, pattern);
+	mutex_unlock(&chip->lock);
+
+	if (ret) {
+		dev_err(&client->dev, "failed loading pattern\n");
+		return ret;
+	}
+
+	return len;
+fail:
+	dev_err(&client->dev, "wrong pattern format\n");
+	return -EINVAL;
+}
+
+static ssize_t store_engine_load(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	return lp5523_do_store_load(&chip->engines[nr - 1], buf, len);
+}
+
+#define store_load(nr)							\
+static ssize_t store_engine##nr##_load(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_load(dev, attr, buf, len, nr);		\
+}
+store_load(1)
+store_load(2)
+store_load(3)
+
+static ssize_t show_engine_mode(struct device *dev,
+				struct device_attribute *attr,
+				char *buf, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	switch (chip->engines[nr - 1].mode) {
+	case LP5523_CMD_RUN:
+		return sprintf(buf, "run\n");
+	case LP5523_CMD_LOAD:
+		return sprintf(buf, "load\n");
+	case LP5523_CMD_DISABLED:
+		return sprintf(buf, "disabled\n");
+	default:
+		return sprintf(buf, "disabled\n");
+	}
+}
+
+#define show_mode(nr)							\
+static ssize_t show_engine##nr##_mode(struct device *dev,		\
+				    struct device_attribute *attr,	\
+				    char *buf)				\
+{									\
+	return show_engine_mode(dev, attr, buf, nr);			\
+}
+show_mode(1)
+show_mode(2)
+show_mode(3)
+
+static ssize_t store_engine_mode(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t len, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	struct lp5523_engine *engine = &chip->engines[nr - 1];
+	mutex_lock(&chip->lock);
+
+	if (!strncmp(buf, "run", 3))
+		lp5523_set_mode(engine, LP5523_CMD_RUN);
+	else if (!strncmp(buf, "load", 4))
+		lp5523_set_mode(engine, LP5523_CMD_LOAD);
+	else if (!strncmp(buf, "disabled", 8))
+		lp5523_set_mode(engine, LP5523_CMD_DISABLED);
+
+	mutex_unlock(&chip->lock);
+	return len;
+}
+
+#define store_mode(nr)							\
+static ssize_t store_engine##nr##_mode(struct device *dev,		\
+				     struct device_attribute *attr,	\
+				     const char *buf, size_t len)	\
+{									\
+	return store_engine_mode(dev, attr, buf, len, nr);		\
+}
+store_mode(1)
+store_mode(2)
+store_mode(3)
+
+static ssize_t show_max_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5523_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->max_current);
+}
+
+static ssize_t show_current(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5523_led *led = cdev_to_led(led_cdev);
+
+	return sprintf(buf, "%d\n", led->led_current);
+}
+
+static ssize_t store_current(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t len)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct lp5523_led *led = cdev_to_led(led_cdev);
+	struct lp5523_chip *chip = led_to_lp5523(led);
+	ssize_t ret;
+	unsigned long curr;
+
+	if (strict_strtoul(buf, 0, &curr))
+		return -EINVAL;
+
+	if (curr > led->max_current)
+		return -EINVAL;
+
+	mutex_lock(&chip->lock);
+	ret = lp5523_write(chip->client,
+			LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
+			(u8)curr);
+	mutex_unlock(&chip->lock);
+
+	if (ret < 0)
+		return ret;
+
+	led->led_current = (u8)curr;
+
+	return len;
+}
+
+/* led class device attributes */
+static DEVICE_ATTR(led_current, S_IRUGO | S_IWUGO, show_current, store_current);
+static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
+
+static struct attribute *lp5523_led_attributes[] = {
+	&dev_attr_led_current.attr,
+	&dev_attr_max_current.attr,
+	NULL,
+};
+
+static struct attribute_group lp5523_led_attribute_group = {
+	.attrs = lp5523_led_attributes
+};
+
+/* device attributes */
+static DEVICE_ATTR(engine1_mode, S_IRUGO | S_IWUGO,
+		   show_engine1_mode, store_engine1_mode);
+static DEVICE_ATTR(engine2_mode, S_IRUGO | S_IWUGO,
+		   show_engine2_mode, store_engine2_mode);
+static DEVICE_ATTR(engine3_mode, S_IRUGO | S_IWUGO,
+		   show_engine3_mode, store_engine3_mode);
+static DEVICE_ATTR(engine1_leds, S_IRUGO | S_IWUGO,
+		   show_engine1_leds, store_engine1_leds);
+static DEVICE_ATTR(engine2_leds, S_IRUGO | S_IWUGO,
+		   show_engine2_leds, store_engine2_leds);
+static DEVICE_ATTR(engine3_leds, S_IRUGO | S_IWUGO,
+		   show_engine3_leds, store_engine3_leds);
+static DEVICE_ATTR(engine1_load, S_IWUGO, NULL, store_engine1_load);
+static DEVICE_ATTR(engine2_load, S_IWUGO, NULL, store_engine2_load);
+static DEVICE_ATTR(engine3_load, S_IWUGO, NULL, store_engine3_load);
+static DEVICE_ATTR(selftest, S_IRUGO, lp5523_selftest, NULL);
+
+static struct attribute *lp5523_attributes[] = {
+	&dev_attr_engine1_mode.attr,
+	&dev_attr_engine2_mode.attr,
+	&dev_attr_engine3_mode.attr,
+	&dev_attr_selftest.attr,
+	NULL
+};
+
+static struct attribute *lp5523_engine1_attributes[] = {
+	&dev_attr_engine1_load.attr,
+	&dev_attr_engine1_leds.attr,
+	NULL
+};
+
+static struct attribute *lp5523_engine2_attributes[] = {
+	&dev_attr_engine2_load.attr,
+	&dev_attr_engine2_leds.attr,
+	NULL
+};
+
+static struct attribute *lp5523_engine3_attributes[] = {
+	&dev_attr_engine3_load.attr,
+	&dev_attr_engine3_leds.attr,
+	NULL
+};
+
+static const struct attribute_group lp5523_group = {
+	.attrs = lp5523_attributes,
+};
+
+static const struct attribute_group lp5523_engine_group[] = {
+	{.attrs = lp5523_engine1_attributes },
+	{.attrs = lp5523_engine2_attributes },
+	{.attrs = lp5523_engine3_attributes },
+};
+
+static int lp5523_register_sysfs(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	int ret;
+
+	ret = sysfs_create_group(&dev->kobj, &lp5523_group);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static void lp5523_unregister_sysfs(struct i2c_client *client)
+{
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	struct device *dev = &client->dev;
+	int i;
+
+	sysfs_remove_group(&dev->kobj, &lp5523_group);
+
+	for (i = 0; i < ARRAY_SIZE(chip->engines); i++)
+		if (chip->engines[i].mode == LP5523_CMD_LOAD)
+			sysfs_remove_group(&dev->kobj, &lp5523_engine_group[i]);
+
+	for (i = 0; i < chip->num_leds; i++)
+		sysfs_remove_group(&chip->leds[i].cdev.dev->kobj,
+				&lp5523_led_attribute_group);
+}
+
+/*--------------------------------------------------------------*/
+/*			Set chip operating mode			*/
+/*--------------------------------------------------------------*/
+static int lp5523_set_mode(struct lp5523_engine *engine, u8 mode)
+{
+	/*  engine to chip */
+	struct lp5523_chip *chip = engine_to_lp5523(engine);
+	struct i2c_client *client = chip->client;
+	struct device *dev = &client->dev;
+	int ret = 0;
+
+	/* if in that mode already do nothing, except for run */
+	if (mode == engine->mode && mode != LP5523_CMD_RUN)
+		return 0;
+
+	if (mode == LP5523_CMD_RUN) {
+		ret = lp5523_run_program(engine);
+	} else if (mode == LP5523_CMD_LOAD) {
+		lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+		lp5523_set_engine_mode(engine, LP5523_CMD_LOAD);
+
+		ret = sysfs_create_group(&dev->kobj, engine->attributes);
+		if (ret)
+			return ret;
+	} else if (mode == LP5523_CMD_DISABLED) {
+		lp5523_set_engine_mode(engine, LP5523_CMD_DISABLED);
+	}
+
+	/* remove load attribute from sysfs if not in load mode */
+	if (engine->mode == LP5523_CMD_LOAD && mode != LP5523_CMD_LOAD)
+		sysfs_remove_group(&dev->kobj, engine->attributes);
+
+	engine->mode = mode;
+
+	return ret;
+}
+
+/*--------------------------------------------------------------*/
+/*			Probe, Attach, Remove			*/
+/*--------------------------------------------------------------*/
+static int __init lp5523_init_engine(struct lp5523_engine *engine, int id)
+{
+	if (id < 1 || id > LP5523_ENGINES)
+		return -1;
+	engine->id = id;
+	engine->engine_mask = LP5523_ENG_MASK_BASE >> SHIFT_MASK(id);
+	engine->prog_page = id - 1;
+	engine->mux_page = id + 2;
+	engine->attributes = &lp5523_engine_group[id - 1];
+
+	return 0;
+}
+
+static int __init lp5523_init_led(struct lp5523_led *led, struct device *dev,
+			   int chan, struct lp5523_platform_data *pdata)
+{
+	char name[32];
+	int res;
+
+	if (chan >= LP5523_LEDS)
+		return -EINVAL;
+
+	if (pdata->led_config[chan].led_current) {
+		led->led_current = pdata->led_config[chan].led_current;
+		led->max_current = pdata->led_config[chan].max_current;
+		led->chan_nr = pdata->led_config[chan].chan_nr;
+
+		if (led->chan_nr >= LP5523_LEDS) {
+			dev_err(dev, "Use channel numbers between 0 and %d\n",
+				LP5523_LEDS - 1);
+			return -EINVAL;
+		}
+
+		snprintf(name, 32, "lp5523:channel%d", chan);
+
+		led->cdev.name = name;
+		led->cdev.brightness_set = lp5523_set_brightness;
+		res = led_classdev_register(dev, &led->cdev);
+		if (res < 0) {
+			dev_err(dev, "couldn't register led on channel %d\n",
+				chan);
+			return res;
+		}
+		res = sysfs_create_group(&led->cdev.dev->kobj,
+				&lp5523_led_attribute_group);
+		if (res < 0) {
+			dev_err(dev, "couldn't register current attribute\n");
+			led_classdev_unregister(&led->cdev);
+			return res;
+		}
+	} else {
+		led->led_current = 0;
+	}
+	return 0;
+}
+
+static struct i2c_driver lp5523_driver;
+
+static int lp5523_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct lp5523_chip		*chip;
+	struct lp5523_platform_data	*pdata;
+	int ret, i, led;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, chip);
+	chip->client = client;
+
+	pdata = client->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data\n");
+		ret = -EINVAL;
+		goto fail1;
+	}
+
+	mutex_init(&chip->lock);
+
+	chip->pdata   = pdata;
+
+	if (pdata->setup_resources) {
+		ret = pdata->setup_resources();
+		if (ret < 0)
+			goto fail1;
+	}
+
+	if (pdata->enable) {
+		pdata->enable(0);
+		usleep_range(1000, 2000); /* Keep enable down at least 1ms */
+		pdata->enable(1);
+		usleep_range(1000, 2000); /* 500us abs min. */
+	}
+
+	lp5523_write(client, LP5523_REG_RESET, 0xff);
+	usleep_range(10000, 20000); /*
+				     * Exact value is not available. 10 - 20ms
+				     * appears to be enough for reset.
+				     */
+	ret = lp5523_detect(client);
+	if (ret)
+		goto fail2;
+
+	dev_info(&client->dev, "LP5523 Programmable led chip found\n");
+
+	/* Initialize engines */
+	for (i = 0; i < ARRAY_SIZE(chip->engines); i++) {
+		ret = lp5523_init_engine(&chip->engines[i], i + 1);
+		if (ret) {
+			dev_err(&client->dev, "error initializing engine\n");
+			goto fail2;
+		}
+	}
+	ret = lp5523_configure(client);
+	if (ret < 0) {
+		dev_err(&client->dev, "error configuring chip\n");
+		goto fail2;
+	}
+
+	/* Initialize leds */
+	chip->num_channels = pdata->num_channels;
+	chip->num_leds = 0;
+	led = 0;
+	for (i = 0; i < pdata->num_channels; i++) {
+		/* Do not initialize channels that are not connected */
+		if (pdata->led_config[i].led_current == 0)
+			continue;
+
+		ret = lp5523_init_led(&chip->leds[led], &client->dev, i, pdata);
+		if (ret) {
+			dev_err(&client->dev, "error initializing leds\n");
+			goto fail3;
+		}
+		chip->num_leds++;
+
+		chip->leds[led].id = led;
+		/* Set LED current */
+		lp5523_write(client,
+			  LP5523_REG_LED_CURRENT_BASE + chip->leds[led].chan_nr,
+			  chip->leds[led].led_current);
+
+		INIT_WORK(&(chip->leds[led].brightness_work),
+			lp5523_led_brightness_work);
+
+		led++;
+	}
+
+	ret = lp5523_register_sysfs(client);
+	if (ret) {
+		dev_err(&client->dev, "registering sysfs failed\n");
+		goto fail3;
+	}
+	return ret;
+fail3:
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+fail2:
+	if (pdata->enable)
+		pdata->enable(0);
+	if (pdata->release_resources)
+		pdata->release_resources();
+fail1:
+	kfree(chip);
+	return ret;
+}
+
+static int lp5523_remove(struct i2c_client *client)
+{
+	struct lp5523_chip *chip = i2c_get_clientdata(client);
+	int i;
+
+	lp5523_unregister_sysfs(client);
+
+	for (i = 0; i < chip->num_leds; i++) {
+		led_classdev_unregister(&chip->leds[i].cdev);
+		cancel_work_sync(&chip->leds[i].brightness_work);
+	}
+
+	if (chip->pdata->enable)
+		chip->pdata->enable(0);
+	if (chip->pdata->release_resources)
+		chip->pdata->release_resources();
+	kfree(chip);
+	return 0;
+}
+
+static const struct i2c_device_id lp5523_id[] = {
+	{ "lp5523", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, lp5523_id);
+
+static struct i2c_driver lp5523_driver = {
+	.driver = {
+		.name	= "lp5523",
+	},
+	.probe		= lp5523_probe,
+	.remove		= lp5523_remove,
+	.id_table	= lp5523_id,
+};
+
+static int __init lp5523_init(void)
+{
+	int ret;
+
+	ret = i2c_add_driver(&lp5523_driver);
+
+	if (ret < 0)
+		printk(KERN_ALERT "Adding lp5523 driver failed\n");
+
+	return ret;
+}
+
+static void __exit lp5523_exit(void)
+{
+	i2c_del_driver(&lp5523_driver);
+}
+
+module_init(lp5523_init);
+module_exit(lp5523_exit);
+
+MODULE_AUTHOR("Mathias Nyman <mathias.nyman@nokia.com>");
+MODULE_DESCRIPTION("LP5523 LED engine");
+MODULE_LICENSE("GPL");
diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
index a688293abd0..614ebebaaa2 100644
--- a/drivers/leds/leds-ss4200.c
+++ b/drivers/leds/leds-ss4200.c
@@ -102,6 +102,7 @@ static struct dmi_system_id __initdata nas_led_whitelist[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "1.00.00")
 		}
 	},
+	{}
 };
 
 /*
diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c
index 5aab32ce4f4..a0452327328 100644
--- a/drivers/leds/leds-wm8350.c
+++ b/drivers/leds/leds-wm8350.c
@@ -276,7 +276,7 @@ static int wm8350_led_remove(struct platform_device *pdev)
 	struct wm8350_led *led = platform_get_drvdata(pdev);
 
 	led_classdev_unregister(&led->cdev);
-	flush_scheduled_work();
+	flush_work_sync(&led->work);
 	wm8350_led_disable(led);
 	regulator_put(led->dcdc);
 	regulator_put(led->isink);
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index 82b77bd482f..b09bcbeade9 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -12,73 +12,25 @@
  */
 
 #include <linux/module.h>
-#include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
 #include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/timer.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include <linux/slab.h>
 #include "leds.h"
 
-struct timer_trig_data {
-	int brightness_on;		/* LED brightness during "on" period.
-					 * (LED_OFF < brightness_on <= LED_FULL)
-					 */
-	unsigned long delay_on;		/* milliseconds on */
-	unsigned long delay_off;	/* milliseconds off */
-	struct timer_list timer;
-};
-
-static void led_timer_function(unsigned long data)
-{
-	struct led_classdev *led_cdev = (struct led_classdev *) data;
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
-	unsigned long brightness;
-	unsigned long delay;
-
-	if (!timer_data->delay_on || !timer_data->delay_off) {
-		led_set_brightness(led_cdev, LED_OFF);
-		return;
-	}
-
-	brightness = led_get_brightness(led_cdev);
-	if (!brightness) {
-		/* Time to switch the LED on. */
-		brightness = timer_data->brightness_on;
-		delay = timer_data->delay_on;
-	} else {
-		/* Store the current brightness value to be able
-		 * to restore it when the delay_off period is over.
-		 */
-		timer_data->brightness_on = brightness;
-		brightness = LED_OFF;
-		delay = timer_data->delay_off;
-	}
-
-	led_set_brightness(led_cdev, brightness);
-
-	mod_timer(&timer_data->timer, jiffies + msecs_to_jiffies(delay));
-}
-
 static ssize_t led_delay_on_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
 
-	return sprintf(buf, "%lu\n", timer_data->delay_on);
+	return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
 }
 
 static ssize_t led_delay_on_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t size)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
@@ -88,21 +40,7 @@ static ssize_t led_delay_on_store(struct device *dev,
 		count++;
 
 	if (count == size) {
-		if (timer_data->delay_on != state) {
-			/* the new value differs from the previous */
-			timer_data->delay_on = state;
-
-			/* deactivate previous settings */
-			del_timer_sync(&timer_data->timer);
-
-			/* try to activate hardware acceleration, if any */
-			if (!led_cdev->blink_set ||
-			    led_cdev->blink_set(led_cdev,
-			      &timer_data->delay_on, &timer_data->delay_off)) {
-				/* no hardware acceleration, blink via timer */
-				mod_timer(&timer_data->timer, jiffies + 1);
-			}
-		}
+		led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off);
 		ret = count;
 	}
 
@@ -113,16 +51,14 @@ static ssize_t led_delay_off_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
 
-	return sprintf(buf, "%lu\n", timer_data->delay_off);
+	return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
 }
 
 static ssize_t led_delay_off_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t size)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
 	int ret = -EINVAL;
 	char *after;
 	unsigned long state = simple_strtoul(buf, &after, 10);
@@ -132,21 +68,7 @@ static ssize_t led_delay_off_store(struct device *dev,
 		count++;
 
 	if (count == size) {
-		if (timer_data->delay_off != state) {
-			/* the new value differs from the previous */
-			timer_data->delay_off = state;
-
-			/* deactivate previous settings */
-			del_timer_sync(&timer_data->timer);
-
-			/* try to activate hardware acceleration, if any */
-			if (!led_cdev->blink_set ||
-			    led_cdev->blink_set(led_cdev,
-			      &timer_data->delay_on, &timer_data->delay_off)) {
-				/* no hardware acceleration, blink via timer */
-				mod_timer(&timer_data->timer, jiffies + 1);
-			}
-		}
+		led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state);
 		ret = count;
 	}
 
@@ -158,60 +80,34 @@ static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store);
 
 static void timer_trig_activate(struct led_classdev *led_cdev)
 {
-	struct timer_trig_data *timer_data;
 	int rc;
 
-	timer_data = kzalloc(sizeof(struct timer_trig_data), GFP_KERNEL);
-	if (!timer_data)
-		return;
-
-	timer_data->brightness_on = led_get_brightness(led_cdev);
-	if (timer_data->brightness_on == LED_OFF)
-		timer_data->brightness_on = led_cdev->max_brightness;
-	led_cdev->trigger_data = timer_data;
-
-	init_timer(&timer_data->timer);
-	timer_data->timer.function = led_timer_function;
-	timer_data->timer.data = (unsigned long) led_cdev;
+	led_cdev->trigger_data = NULL;
 
 	rc = device_create_file(led_cdev->dev, &dev_attr_delay_on);
 	if (rc)
-		goto err_out;
+		return;
 	rc = device_create_file(led_cdev->dev, &dev_attr_delay_off);
 	if (rc)
 		goto err_out_delayon;
 
-	/* If there is hardware support for blinking, start one
-	 * user friendly blink rate chosen by the driver.
-	 */
-	if (led_cdev->blink_set)
-		led_cdev->blink_set(led_cdev,
-			&timer_data->delay_on, &timer_data->delay_off);
+	led_cdev->trigger_data = (void *)1;
 
 	return;
 
 err_out_delayon:
 	device_remove_file(led_cdev->dev, &dev_attr_delay_on);
-err_out:
-	led_cdev->trigger_data = NULL;
-	kfree(timer_data);
 }
 
 static void timer_trig_deactivate(struct led_classdev *led_cdev)
 {
-	struct timer_trig_data *timer_data = led_cdev->trigger_data;
-	unsigned long on = 0, off = 0;
-
-	if (timer_data) {
+	if (led_cdev->trigger_data) {
 		device_remove_file(led_cdev->dev, &dev_attr_delay_on);
 		device_remove_file(led_cdev->dev, &dev_attr_delay_off);
-		del_timer_sync(&timer_data->timer);
-		kfree(timer_data);
 	}
 
-	/* If there is hardware support for blinking, stop it */
-	if (led_cdev->blink_set)
-		led_cdev->blink_set(led_cdev, &on, &off);
+	/* Stop blinking */
+	led_brightness_set(led_cdev, LED_OFF);
 }
 
 static struct led_trigger timer_led_trigger = {
diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig
index 3d7355ff730..fa51af11c6f 100644
--- a/drivers/macintosh/Kconfig
+++ b/drivers/macintosh/Kconfig
@@ -102,6 +102,7 @@ config ADB_PMU_LED
 config ADB_PMU_LED_IDE
 	bool "Use front LED as IDE LED by default"
 	depends on ADB_PMU_LED
+	depends on LEDS_CLASS
 	select LEDS_TRIGGERS
 	select LEDS_TRIGGER_IDE_DISK
 	help
diff --git a/drivers/macintosh/adb-iop.c b/drivers/macintosh/adb-iop.c
index 44469662517..f5f4da3d0b6 100644
--- a/drivers/macintosh/adb-iop.c
+++ b/drivers/macintosh/adb-iop.c
@@ -80,7 +80,7 @@ static void adb_iop_end_req(struct adb_request *req, int state)
 static void adb_iop_complete(struct iop_msg *msg)
 {
 	struct adb_request *req;
-	uint flags;
+	unsigned long flags;
 
 	local_irq_save(flags);
 
@@ -103,7 +103,7 @@ static void adb_iop_listen(struct iop_msg *msg)
 {
 	struct adb_iopmsg *amsg = (struct adb_iopmsg *) msg->message;
 	struct adb_request *req;
-	uint flags;
+	unsigned long flags;
 #ifdef DEBUG_ADB_IOP
 	int i;
 #endif
diff --git a/drivers/macintosh/ams/ams-core.c b/drivers/macintosh/ams/ams-core.c
index 2ad62c339cd..399beb1638d 100644
--- a/drivers/macintosh/ams/ams-core.c
+++ b/drivers/macintosh/ams/ams-core.c
@@ -226,7 +226,7 @@ void ams_sensor_detach(void)
 	 * We do this after ams_info.exit(), because an interrupt might
 	 * have arrived before disabling them.
 	 */
-	flush_scheduled_work();
+	flush_work_sync(&ams_info.worker);
 
 	/* Remove device */
 	of_device_unregister(ams_info.of_dev);
diff --git a/drivers/macintosh/mac_hid.c b/drivers/macintosh/mac_hid.c
index 067f9962f49..6a82388505f 100644
--- a/drivers/macintosh/mac_hid.c
+++ b/drivers/macintosh/mac_hid.c
@@ -23,6 +23,8 @@ static int mouse_button3_keycode = KEY_RIGHTALT;	/* right option key */
 
 static struct input_dev *mac_hid_emumouse_dev;
 
+static DEFINE_MUTEX(mac_hid_emumouse_mutex);
+
 static int mac_hid_create_emumouse(void)
 {
 	static struct lock_class_key mac_hid_emumouse_dev_event_class;
@@ -187,6 +189,10 @@ static int mac_hid_toggle_emumouse(ctl_table *table, int write,
 	int old_val = *valp;
 	int rc;
 
+	rc = mutex_lock_killable(&mac_hid_emumouse_mutex);
+	if (rc)
+		return rc;
+
 	rc = proc_dointvec(table, write, buffer, lenp, ppos);
 
 	if (rc == 0 && write && *valp != old_val) {
@@ -202,6 +208,8 @@ static int mac_hid_toggle_emumouse(ctl_table *table, int write,
 	if (rc)
 		*valp = old_val;
 
+	mutex_unlock(&mac_hid_emumouse_mutex);
+
 	return rc;
 }
 
diff --git a/drivers/macintosh/rack-meter.c b/drivers/macintosh/rack-meter.c
index 53cce3a5da2..39f660b2a60 100644
--- a/drivers/macintosh/rack-meter.c
+++ b/drivers/macintosh/rack-meter.c
@@ -285,8 +285,8 @@ static void __devinit rackmeter_init_cpu_sniffer(struct rackmeter *rm)
 
 static void __devexit rackmeter_stop_cpu_sniffer(struct rackmeter *rm)
 {
-	cancel_rearming_delayed_work(&rm->cpu[0].sniffer);
-	cancel_rearming_delayed_work(&rm->cpu[1].sniffer);
+	cancel_delayed_work_sync(&rm->cpu[0].sniffer);
+	cancel_delayed_work_sync(&rm->cpu[1].sniffer);
 }
 
 static int __devinit rackmeter_setup(struct rackmeter *rm)
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 90267f8d64e..4d705cea0f8 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -517,9 +517,8 @@ int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
 	 */
 
 	if (q->merge_bvec_fn && !ti->type->merge)
-		limits->max_sectors =
-			min_not_zero(limits->max_sectors,
-				     (unsigned int) (PAGE_SIZE >> 9));
+		blk_limits_max_hw_sectors(limits,
+					  (unsigned int) (PAGE_SIZE >> 9));
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dm_set_device_limits);
@@ -1131,11 +1130,6 @@ void dm_table_set_restrictions(struct dm_table *t, struct request_queue *q,
 	 */
 	q->limits = *limits;
 
-	if (limits->no_cluster)
-		queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
-	else
-		queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, q);
-
 	if (!dm_table_supports_discards(t))
 		queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
 	else
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 4e957f3140a..175c424f201 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -371,10 +371,15 @@ static void md_end_flush(struct bio *bio, int err)
 	bio_put(bio);
 }
 
-static void submit_flushes(mddev_t *mddev)
+static void md_submit_flush_data(struct work_struct *ws);
+
+static void submit_flushes(struct work_struct *ws)
 {
+	mddev_t *mddev = container_of(ws, mddev_t, flush_work);
 	mdk_rdev_t *rdev;
 
+	INIT_WORK(&mddev->flush_work, md_submit_flush_data);
+	atomic_set(&mddev->flush_pending, 1);
 	rcu_read_lock();
 	list_for_each_entry_rcu(rdev, &mddev->disks, same_set)
 		if (rdev->raid_disk >= 0 &&
@@ -397,6 +402,8 @@ static void submit_flushes(mddev_t *mddev)
 			rdev_dec_pending(rdev, mddev);
 		}
 	rcu_read_unlock();
+	if (atomic_dec_and_test(&mddev->flush_pending))
+		queue_work(md_wq, &mddev->flush_work);
 }
 
 static void md_submit_flush_data(struct work_struct *ws)
@@ -404,8 +411,6 @@ static void md_submit_flush_data(struct work_struct *ws)
 	mddev_t *mddev = container_of(ws, mddev_t, flush_work);
 	struct bio *bio = mddev->flush_bio;
 
-	atomic_set(&mddev->flush_pending, 1);
-
 	if (bio->bi_size == 0)
 		/* an empty barrier - all done */
 		bio_endio(bio, 0);
@@ -414,10 +419,9 @@ static void md_submit_flush_data(struct work_struct *ws)
 		if (mddev->pers->make_request(mddev, bio))
 			generic_make_request(bio);
 	}
-	if (atomic_dec_and_test(&mddev->flush_pending)) {
-		mddev->flush_bio = NULL;
-		wake_up(&mddev->sb_wait);
-	}
+
+	mddev->flush_bio = NULL;
+	wake_up(&mddev->sb_wait);
 }
 
 void md_flush_request(mddev_t *mddev, struct bio *bio)
@@ -429,13 +433,8 @@ void md_flush_request(mddev_t *mddev, struct bio *bio)
 	mddev->flush_bio = bio;
 	spin_unlock_irq(&mddev->write_lock);
 
-	atomic_set(&mddev->flush_pending, 1);
-	INIT_WORK(&mddev->flush_work, md_submit_flush_data);
-
-	submit_flushes(mddev);
-
-	if (atomic_dec_and_test(&mddev->flush_pending))
-		queue_work(md_wq, &mddev->flush_work);
+	INIT_WORK(&mddev->flush_work, submit_flushes);
+	queue_work(md_wq, &mddev->flush_work);
 }
 EXPORT_SYMBOL(md_flush_request);
 
@@ -706,7 +705,7 @@ static struct mdk_personality *find_pers(int level, char *clevel)
 /* return the offset of the super block in 512byte sectors */
 static inline sector_t calc_dev_sboffset(struct block_device *bdev)
 {
-	sector_t num_sectors = bdev->bd_inode->i_size / 512;
+	sector_t num_sectors = i_size_read(bdev->bd_inode) / 512;
 	return MD_NEW_SIZE_SECTORS(num_sectors);
 }
 
@@ -1337,7 +1336,7 @@ super_90_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors)
 	md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
 		       rdev->sb_page);
 	md_super_wait(rdev->mddev);
-	return num_sectors / 2; /* kB for sysfs */
+	return num_sectors;
 }
 
 
@@ -1386,7 +1385,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 	 */
 	switch(minor_version) {
 	case 0:
-		sb_start = rdev->bdev->bd_inode->i_size >> 9;
+		sb_start = i_size_read(rdev->bdev->bd_inode) >> 9;
 		sb_start -= 8*2;
 		sb_start &= ~(sector_t)(4*2-1);
 		break;
@@ -1472,7 +1471,7 @@ static int super_1_load(mdk_rdev_t *rdev, mdk_rdev_t *refdev, int minor_version)
 			ret = 0;
 	}
 	if (minor_version)
-		rdev->sectors = (rdev->bdev->bd_inode->i_size >> 9) -
+		rdev->sectors = (i_size_read(rdev->bdev->bd_inode) >> 9) -
 			le64_to_cpu(sb->data_offset);
 	else
 		rdev->sectors = rdev->sb_start;
@@ -1680,7 +1679,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors)
 		return 0; /* component must fit device */
 	if (rdev->sb_start < rdev->data_offset) {
 		/* minor versions 1 and 2; superblock before data */
-		max_sectors = rdev->bdev->bd_inode->i_size >> 9;
+		max_sectors = i_size_read(rdev->bdev->bd_inode) >> 9;
 		max_sectors -= rdev->data_offset;
 		if (!num_sectors || num_sectors > max_sectors)
 			num_sectors = max_sectors;
@@ -1690,7 +1689,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors)
 	} else {
 		/* minor version 0; superblock after data */
 		sector_t sb_start;
-		sb_start = (rdev->bdev->bd_inode->i_size >> 9) - 8*2;
+		sb_start = (i_size_read(rdev->bdev->bd_inode) >> 9) - 8*2;
 		sb_start &= ~(sector_t)(4*2 - 1);
 		max_sectors = rdev->sectors + sb_start - rdev->sb_start;
 		if (!num_sectors || num_sectors > max_sectors)
@@ -1704,7 +1703,7 @@ super_1_rdev_size_change(mdk_rdev_t *rdev, sector_t num_sectors)
 	md_super_write(rdev->mddev, rdev, rdev->sb_start, rdev->sb_size,
 		       rdev->sb_page);
 	md_super_wait(rdev->mddev);
-	return num_sectors / 2; /* kB for sysfs */
+	return num_sectors;
 }
 
 static struct super_type super_types[] = {
@@ -2584,7 +2583,7 @@ rdev_size_store(mdk_rdev_t *rdev, const char *buf, size_t len)
 			if (!sectors)
 				return -EBUSY;
 		} else if (!sectors)
-			sectors = (rdev->bdev->bd_inode->i_size >> 9) -
+			sectors = (i_size_read(rdev->bdev->bd_inode) >> 9) -
 				rdev->data_offset;
 	}
 	if (sectors < my_mddev->dev_sectors)
@@ -2797,7 +2796,7 @@ static mdk_rdev_t *md_import_device(dev_t newdev, int super_format, int super_mi
 
 	kobject_init(&rdev->kobj, &rdev_ktype);
 
-	size = rdev->bdev->bd_inode->i_size >> BLOCK_SIZE_BITS;
+	size = i_size_read(rdev->bdev->bd_inode) >> BLOCK_SIZE_BITS;
 	if (!size) {
 		printk(KERN_WARNING 
 			"md: %s has zero or unknown size, marking faulty!\n",
@@ -4296,9 +4295,6 @@ static int md_alloc(dev_t dev, char *name)
 		goto abort;
 	mddev->queue->queuedata = mddev;
 
-	/* Can be unlocked because the queue is new: no concurrency */
-	queue_flag_set_unlocked(QUEUE_FLAG_CLUSTER, mddev->queue);
-
 	blk_queue_make_request(mddev->queue, md_make_request);
 
 	disk = alloc_disk(1 << shift);
@@ -4338,6 +4334,8 @@ static int md_alloc(dev_t dev, char *name)
 	if (mddev->kobj.sd &&
 	    sysfs_create_group(&mddev->kobj, &md_bitmap_group))
 		printk(KERN_DEBUG "pointless warning\n");
+
+	blk_queue_flush(mddev->queue, REQ_FLUSH | REQ_FUA);
  abort:
 	mutex_unlock(&disks_mutex);
 	if (!error && mddev->kobj.sd) {
@@ -5158,7 +5156,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info)
 				PTR_ERR(rdev));
 			return PTR_ERR(rdev);
 		}
-		/* set save_raid_disk if appropriate */
+		/* set saved_raid_disk if appropriate */
 		if (!mddev->persistent) {
 			if (info->state & (1<<MD_DISK_SYNC)  &&
 			    info->raid_disk < mddev->raid_disks)
@@ -5168,7 +5166,10 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info)
 		} else
 			super_types[mddev->major_version].
 				validate_super(mddev, rdev);
-		rdev->saved_raid_disk = rdev->raid_disk;
+		if (test_bit(In_sync, &rdev->flags))
+			rdev->saved_raid_disk = rdev->raid_disk;
+		else
+			rdev->saved_raid_disk = -1;
 
 		clear_bit(In_sync, &rdev->flags); /* just to be sure */
 		if (info->state & (1<<MD_DISK_WRITEMOSTLY))
@@ -5235,8 +5236,8 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info)
 
 		if (!mddev->persistent) {
 			printk(KERN_INFO "md: nonpersistent superblock ...\n");
-			rdev->sb_start = rdev->bdev->bd_inode->i_size / 512;
-		} else 
+			rdev->sb_start = i_size_read(rdev->bdev->bd_inode) / 512;
+		} else
 			rdev->sb_start = calc_dev_sboffset(rdev->bdev);
 		rdev->sectors = rdev->sb_start;
 
@@ -5306,7 +5307,7 @@ static int hot_add_disk(mddev_t * mddev, dev_t dev)
 	if (mddev->persistent)
 		rdev->sb_start = calc_dev_sboffset(rdev->bdev);
 	else
-		rdev->sb_start = rdev->bdev->bd_inode->i_size / 512;
+		rdev->sb_start = i_size_read(rdev->bdev->bd_inode) / 512;
 
 	rdev->sectors = rdev->sb_start;
 
@@ -6040,9 +6041,8 @@ static int md_thread(void * arg)
 			 || kthread_should_stop(),
 			 thread->timeout);
 
-		clear_bit(THREAD_WAKEUP, &thread->flags);
-
-		thread->run(thread->mddev);
+		if (test_and_clear_bit(THREAD_WAKEUP, &thread->flags))
+			thread->run(thread->mddev);
 	}
 
 	return 0;
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 45f8324196e..845cf95b612 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -1161,6 +1161,7 @@ static int raid1_remove_disk(mddev_t *mddev, int number)
 		 * is not possible.
 		 */
 		if (!test_bit(Faulty, &rdev->flags) &&
+		    !mddev->recovery_disabled &&
 		    mddev->degraded < conf->raid_disks) {
 			err = -EBUSY;
 			goto abort;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index c67aa54694a..0641674827f 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -2397,13 +2397,13 @@ static int run(mddev_t *mddev)
 	return 0;
 
 out_free_conf:
+	md_unregister_thread(mddev->thread);
 	if (conf->r10bio_pool)
 		mempool_destroy(conf->r10bio_pool);
 	safe_put_page(conf->tmppage);
 	kfree(conf->mirrors);
 	kfree(conf);
 	mddev->private = NULL;
-	md_unregister_thread(mddev->thread);
 out:
 	return -EIO;
 }
diff --git a/drivers/media/IR/ir-functions.c b/drivers/media/IR/ir-functions.c
deleted file mode 100644
index db591e42188..00000000000
--- a/drivers/media/IR/ir-functions.c
+++ /dev/null
@@ -1,356 +0,0 @@
-/*
- *
- * some common structs and functions to handle infrared remotes via
- * input layer ...
- *
- * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/jiffies.h>
-#include <media/ir-common.h>
-#include "ir-core-priv.h"
-
-/* -------------------------------------------------------------------------- */
-
-MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
-MODULE_LICENSE("GPL");
-
-static int repeat = 1;
-module_param(repeat, int, 0444);
-MODULE_PARM_DESC(repeat,"auto-repeat for IR keys (default: on)");
-
-/* -------------------------------------------------------------------------- */
-
-static void ir_input_key_event(struct input_dev *dev, struct ir_input_state *ir)
-{
-	if (KEY_RESERVED == ir->keycode) {
-		printk(KERN_INFO "%s: unknown key: key=0x%02x down=%d\n",
-		       dev->name, ir->ir_key, ir->keypressed);
-		return;
-	}
-	IR_dprintk(1,"%s: key event code=%d down=%d\n",
-		dev->name,ir->keycode,ir->keypressed);
-	input_report_key(dev,ir->keycode,ir->keypressed);
-	input_sync(dev);
-}
-
-/* -------------------------------------------------------------------------- */
-
-int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
-		  const u64 ir_type)
-{
-	ir->ir_type = ir_type;
-
-	if (repeat)
-		set_bit(EV_REP, dev->evbit);
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_input_init);
-
-
-void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir)
-{
-	if (ir->keypressed) {
-		ir->keypressed = 0;
-		ir_input_key_event(dev,ir);
-	}
-}
-EXPORT_SYMBOL_GPL(ir_input_nokey);
-
-void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
-		      u32 ir_key)
-{
-	u32 keycode = ir_g_keycode_from_table(dev, ir_key);
-
-	if (ir->keypressed && ir->keycode != keycode) {
-		ir->keypressed = 0;
-		ir_input_key_event(dev,ir);
-	}
-	if (!ir->keypressed) {
-		ir->ir_key  = ir_key;
-		ir->keycode = keycode;
-		ir->keypressed = 1;
-		ir_input_key_event(dev,ir);
-	}
-}
-EXPORT_SYMBOL_GPL(ir_input_keydown);
-
-/* -------------------------------------------------------------------------- */
-/* extract mask bits out of data and pack them into the result */
-u32 ir_extract_bits(u32 data, u32 mask)
-{
-	u32 vbit = 1, value = 0;
-
-	do {
-	    if (mask&1) {
-		if (data&1)
-			value |= vbit;
-		vbit<<=1;
-	    }
-	    data>>=1;
-	} while (mask>>=1);
-
-	return value;
-}
-EXPORT_SYMBOL_GPL(ir_extract_bits);
-
-static int inline getbit(u32 *samples, int bit)
-{
-	return (samples[bit/32] & (1 << (31-(bit%32)))) ? 1 : 0;
-}
-
-/* sump raw samples for visual debugging ;) */
-int ir_dump_samples(u32 *samples, int count)
-{
-	int i, bit, start;
-
-	printk(KERN_DEBUG "ir samples: ");
-	start = 0;
-	for (i = 0; i < count * 32; i++) {
-		bit = getbit(samples,i);
-		if (bit)
-			start = 1;
-		if (0 == start)
-			continue;
-		printk("%s", bit ? "#" : "_");
-	}
-	printk("\n");
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_dump_samples);
-
-/* decode raw samples, pulse distance coding used by NEC remotes */
-int ir_decode_pulsedistance(u32 *samples, int count, int low, int high)
-{
-	int i,last,bit,len;
-	u32 curBit;
-	u32 value;
-
-	/* find start burst */
-	for (i = len = 0; i < count * 32; i++) {
-		bit = getbit(samples,i);
-		if (bit) {
-			len++;
-		} else {
-			if (len >= 29)
-				break;
-			len = 0;
-		}
-	}
-
-	/* start burst to short */
-	if (len < 29)
-		return 0xffffffff;
-
-	/* find start silence */
-	for (len = 0; i < count * 32; i++) {
-		bit = getbit(samples,i);
-		if (bit) {
-			break;
-		} else {
-			len++;
-		}
-	}
-
-	/* silence to short */
-	if (len < 7)
-		return 0xffffffff;
-
-	/* go decoding */
-	len   = 0;
-	last = 1;
-	value = 0; curBit = 1;
-	for (; i < count * 32; i++) {
-		bit  = getbit(samples,i);
-		if (last) {
-			if(bit) {
-				continue;
-			} else {
-				len = 1;
-			}
-		} else {
-			if (bit) {
-				if (len > (low + high) /2)
-					value |= curBit;
-				curBit <<= 1;
-				if (curBit == 1)
-					break;
-			} else {
-				len++;
-			}
-		}
-		last = bit;
-	}
-
-	return value;
-}
-EXPORT_SYMBOL_GPL(ir_decode_pulsedistance);
-
-/* decode raw samples, biphase coding, used by rc5 for example */
-int ir_decode_biphase(u32 *samples, int count, int low, int high)
-{
-	int i,last,bit,len,flips;
-	u32 value;
-
-	/* find start bit (1) */
-	for (i = 0; i < 32; i++) {
-		bit = getbit(samples,i);
-		if (bit)
-			break;
-	}
-
-	/* go decoding */
-	len   = 0;
-	flips = 0;
-	value = 1;
-	for (; i < count * 32; i++) {
-		if (len > high)
-			break;
-		if (flips > 1)
-			break;
-		last = bit;
-		bit  = getbit(samples,i);
-		if (last == bit) {
-			len++;
-			continue;
-		}
-		if (len < low) {
-			len++;
-			flips++;
-			continue;
-		}
-		value <<= 1;
-		value |= bit;
-		flips = 0;
-		len   = 1;
-	}
-	return value;
-}
-EXPORT_SYMBOL_GPL(ir_decode_biphase);
-
-/* RC5 decoding stuff, moved from bttv-input.c to share it with
- * saa7134 */
-
-/* decode raw bit pattern to RC5 code */
-u32 ir_rc5_decode(unsigned int code)
-{
-	unsigned int org_code = code;
-	unsigned int pair;
-	unsigned int rc5 = 0;
-	int i;
-
-	for (i = 0; i < 14; ++i) {
-		pair = code & 0x3;
-		code >>= 2;
-
-		rc5 <<= 1;
-		switch (pair) {
-		case 0:
-		case 2:
-			break;
-		case 1:
-			rc5 |= 1;
-			break;
-		case 3:
-			IR_dprintk(1, "ir-common: ir_rc5_decode(%x) bad code\n", org_code);
-			return 0;
-		}
-	}
-	IR_dprintk(1, "ir-common: code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
-		"instr=%x\n", rc5, org_code, RC5_START(rc5),
-		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
-	return rc5;
-}
-EXPORT_SYMBOL_GPL(ir_rc5_decode);
-
-void ir_rc5_timer_end(unsigned long data)
-{
-	struct card_ir *ir = (struct card_ir *)data;
-	struct timeval tv;
-	unsigned long current_jiffies, timeout;
-	u32 gap;
-	u32 rc5 = 0;
-
-	/* get time */
-	current_jiffies = jiffies;
-	do_gettimeofday(&tv);
-
-	/* avoid overflow with gap >1s */
-	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
-		gap = 200000;
-	} else {
-		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-		    tv.tv_usec - ir->base_time.tv_usec;
-	}
-
-	/* signal we're ready to start a new code */
-	ir->active = 0;
-
-	/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
-	if (gap < 28000) {
-		IR_dprintk(1, "ir-common: spurious timer_end\n");
-		return;
-	}
-
-	if (ir->last_bit < 20) {
-		/* ignore spurious codes (caused by light/other remotes) */
-		IR_dprintk(1, "ir-common: short code: %x\n", ir->code);
-	} else {
-		ir->code = (ir->code << ir->shift_by) | 1;
-		rc5 = ir_rc5_decode(ir->code);
-
-		/* two start bits? */
-		if (RC5_START(rc5) != ir->start) {
-			IR_dprintk(1, "ir-common: rc5 start bits invalid: %u\n", RC5_START(rc5));
-
-			/* right address? */
-		} else if (RC5_ADDR(rc5) == ir->addr) {
-			u32 toggle = RC5_TOGGLE(rc5);
-			u32 instr = RC5_INSTR(rc5);
-
-			/* Good code, decide if repeat/repress */
-			if (toggle != RC5_TOGGLE(ir->last_rc5) ||
-			    instr != RC5_INSTR(ir->last_rc5)) {
-				IR_dprintk(1, "ir-common: instruction %x, toggle %x\n", instr,
-					toggle);
-				ir_input_nokey(ir->dev, &ir->ir);
-				ir_input_keydown(ir->dev, &ir->ir, instr);
-			}
-
-			/* Set/reset key-up timer */
-			timeout = current_jiffies +
-				  msecs_to_jiffies(ir->rc5_key_timeout);
-			mod_timer(&ir->timer_keyup, timeout);
-
-			/* Save code for repeat test */
-			ir->last_rc5 = rc5;
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(ir_rc5_timer_end);
-
-void ir_rc5_timer_keyup(unsigned long data)
-{
-	struct card_ir *ir = (struct card_ir *)data;
-
-	IR_dprintk(1, "ir-common: key released\n");
-	ir_input_nokey(ir->dev, &ir->ir);
-}
-EXPORT_SYMBOL_GPL(ir_rc5_timer_keyup);
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
deleted file mode 100644
index f60107c3b09..00000000000
--- a/drivers/media/IR/ir-keytable.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/* ir-keytable.c - handle IR scancode->keycode tables
- *
- * Copyright (C) 2009 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-
-#include <linux/input.h>
-#include <linux/slab.h>
-#include "ir-core-priv.h"
-
-/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
-#define IR_TAB_MIN_SIZE	256
-#define IR_TAB_MAX_SIZE	8192
-
-/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
-#define IR_KEYPRESS_TIMEOUT 250
-
-/**
- * ir_create_table() - initializes a scancode table
- * @rc_tab:	the ir_scancode_table to initialize
- * @name:	name to assign to the table
- * @ir_type:	ir type to assign to the new table
- * @size:	initial size of the table
- * @return:	zero on success or a negative error code
- *
- * This routine will initialize the ir_scancode_table and will allocate
- * memory to hold at least the specified number elements.
- */
-static int ir_create_table(struct ir_scancode_table *rc_tab,
-			   const char *name, u64 ir_type, size_t size)
-{
-	rc_tab->name = name;
-	rc_tab->ir_type = ir_type;
-	rc_tab->alloc = roundup_pow_of_two(size * sizeof(struct ir_scancode));
-	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
-	rc_tab->scan = kmalloc(rc_tab->alloc, GFP_KERNEL);
-	if (!rc_tab->scan)
-		return -ENOMEM;
-
-	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
-		   rc_tab->size, rc_tab->alloc);
-	return 0;
-}
-
-/**
- * ir_free_table() - frees memory allocated by a scancode table
- * @rc_tab:	the table whose mappings need to be freed
- *
- * This routine will free memory alloctaed for key mappings used by given
- * scancode table.
- */
-static void ir_free_table(struct ir_scancode_table *rc_tab)
-{
-	rc_tab->size = 0;
-	kfree(rc_tab->scan);
-	rc_tab->scan = NULL;
-}
-
-/**
- * ir_resize_table() - resizes a scancode table if necessary
- * @rc_tab:	the ir_scancode_table to resize
- * @gfp_flags:	gfp flags to use when allocating memory
- * @return:	zero on success or a negative error code
- *
- * This routine will shrink the ir_scancode_table if it has lots of
- * unused entries and grow it if it is full.
- */
-static int ir_resize_table(struct ir_scancode_table *rc_tab, gfp_t gfp_flags)
-{
-	unsigned int oldalloc = rc_tab->alloc;
-	unsigned int newalloc = oldalloc;
-	struct ir_scancode *oldscan = rc_tab->scan;
-	struct ir_scancode *newscan;
-
-	if (rc_tab->size == rc_tab->len) {
-		/* All entries in use -> grow keytable */
-		if (rc_tab->alloc >= IR_TAB_MAX_SIZE)
-			return -ENOMEM;
-
-		newalloc *= 2;
-		IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
-	}
-
-	if ((rc_tab->len * 3 < rc_tab->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
-		/* Less than 1/3 of entries in use -> shrink keytable */
-		newalloc /= 2;
-		IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
-	}
-
-	if (newalloc == oldalloc)
-		return 0;
-
-	newscan = kmalloc(newalloc, gfp_flags);
-	if (!newscan) {
-		IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
-		return -ENOMEM;
-	}
-
-	memcpy(newscan, rc_tab->scan, rc_tab->len * sizeof(struct ir_scancode));
-	rc_tab->scan = newscan;
-	rc_tab->alloc = newalloc;
-	rc_tab->size = rc_tab->alloc / sizeof(struct ir_scancode);
-	kfree(oldscan);
-	return 0;
-}
-
-/**
- * ir_update_mapping() - set a keycode in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @rc_tab:	scancode table to be adjusted
- * @index:	index of the mapping that needs to be updated
- * @keycode:	the desired keycode
- * @return:	previous keycode assigned to the mapping
- *
- * This routine is used to update scancode->keycopde mapping at given
- * position.
- */
-static unsigned int ir_update_mapping(struct input_dev *dev,
-				      struct ir_scancode_table *rc_tab,
-				      unsigned int index,
-				      unsigned int new_keycode)
-{
-	int old_keycode = rc_tab->scan[index].keycode;
-	int i;
-
-	/* Did the user wish to remove the mapping? */
-	if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
-		IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
-			   index, rc_tab->scan[index].scancode);
-		rc_tab->len--;
-		memmove(&rc_tab->scan[index], &rc_tab->scan[index+ 1],
-			(rc_tab->len - index) * sizeof(struct ir_scancode));
-	} else {
-		IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
-			   index,
-			   old_keycode == KEY_RESERVED ? "New" : "Replacing",
-			   rc_tab->scan[index].scancode, new_keycode);
-		rc_tab->scan[index].keycode = new_keycode;
-		__set_bit(new_keycode, dev->keybit);
-	}
-
-	if (old_keycode != KEY_RESERVED) {
-		/* A previous mapping was updated... */
-		__clear_bit(old_keycode, dev->keybit);
-		/* ... but another scancode might use the same keycode */
-		for (i = 0; i < rc_tab->len; i++) {
-			if (rc_tab->scan[i].keycode == old_keycode) {
-				__set_bit(old_keycode, dev->keybit);
-				break;
-			}
-		}
-
-		/* Possibly shrink the keytable, failure is not a problem */
-		ir_resize_table(rc_tab, GFP_ATOMIC);
-	}
-
-	return old_keycode;
-}
-
-/**
- * ir_locate_scancode() - set a keycode in the scancode->keycode table
- * @ir_dev:	the struct ir_input_dev device descriptor
- * @rc_tab:	scancode table to be searched
- * @scancode:	the desired scancode
- * @resize:	controls whether we allowed to resize the table to
- *		accomodate not yet present scancodes
- * @return:	index of the mapping containing scancode in question
- *		or -1U in case of failure.
- *
- * This routine is used to locate given scancode in ir_scancode_table.
- * If scancode is not yet present the routine will allocate a new slot
- * for it.
- */
-static unsigned int ir_establish_scancode(struct ir_input_dev *ir_dev,
-					  struct ir_scancode_table *rc_tab,
-					  unsigned int scancode,
-					  bool resize)
-{
-	unsigned int i;
-
-	/*
-	 * Unfortunately, some hardware-based IR decoders don't provide
-	 * all bits for the complete IR code. In general, they provide only
-	 * the command part of the IR code. Yet, as it is possible to replace
-	 * the provided IR with another one, it is needed to allow loading
-	 * IR tables from other remotes. So,
-	 */
-	if (ir_dev->props && ir_dev->props->scanmask)
-		scancode &= ir_dev->props->scanmask;
-
-	/* First check if we already have a mapping for this ir command */
-	for (i = 0; i < rc_tab->len; i++) {
-		if (rc_tab->scan[i].scancode == scancode)
-			return i;
-
-		/* Keytable is sorted from lowest to highest scancode */
-		if (rc_tab->scan[i].scancode >= scancode)
-			break;
-	}
-
-	/* No previous mapping found, we might need to grow the table */
-	if (rc_tab->size == rc_tab->len) {
-		if (!resize || ir_resize_table(rc_tab, GFP_ATOMIC))
-			return -1U;
-	}
-
-	/* i is the proper index to insert our new keycode */
-	if (i < rc_tab->len)
-		memmove(&rc_tab->scan[i + 1], &rc_tab->scan[i],
-			(rc_tab->len - i) * sizeof(struct ir_scancode));
-	rc_tab->scan[i].scancode = scancode;
-	rc_tab->scan[i].keycode = KEY_RESERVED;
-	rc_tab->len++;
-
-	return i;
-}
-
-/**
- * ir_setkeycode() - set a keycode in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @scancode:	the desired scancode
- * @keycode:	result
- * @return:	-EINVAL if the keycode could not be inserted, otherwise zero.
- *
- * This routine is used to handle evdev EVIOCSKEY ioctl.
- */
-static int ir_setkeycode(struct input_dev *dev,
-			 const struct input_keymap_entry *ke,
-			 unsigned int *old_keycode)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	unsigned int index;
-	unsigned int scancode;
-	int retval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rc_tab->lock, flags);
-
-	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
-		index = ke->index;
-		if (index >= rc_tab->len) {
-			retval = -EINVAL;
-			goto out;
-		}
-	} else {
-		retval = input_scancode_to_scalar(ke, &scancode);
-		if (retval)
-			goto out;
-
-		index = ir_establish_scancode(ir_dev, rc_tab, scancode, true);
-		if (index >= rc_tab->len) {
-			retval = -ENOMEM;
-			goto out;
-		}
-	}
-
-	*old_keycode = ir_update_mapping(dev, rc_tab, index, ke->keycode);
-
-out:
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
-	return retval;
-}
-
-/**
- * ir_setkeytable() - sets several entries in the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @to:		the struct ir_scancode_table to copy entries to
- * @from:	the struct ir_scancode_table to copy entries from
- * @return:	-ENOMEM if all keycodes could not be inserted, otherwise zero.
- *
- * This routine is used to handle table initialization.
- */
-static int ir_setkeytable(struct ir_input_dev *ir_dev,
-			  const struct ir_scancode_table *from)
-{
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	unsigned int i, index;
-	int rc;
-
-	rc = ir_create_table(&ir_dev->rc_tab,
-			     from->name, from->ir_type, from->size);
-	if (rc)
-		return rc;
-
-	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
-		   rc_tab->size, rc_tab->alloc);
-
-	for (i = 0; i < from->size; i++) {
-		index = ir_establish_scancode(ir_dev, rc_tab,
-					      from->scan[i].scancode, false);
-		if (index >= rc_tab->len) {
-			rc = -ENOMEM;
-			break;
-		}
-
-		ir_update_mapping(ir_dev->input_dev, rc_tab, index,
-				  from->scan[i].keycode);
-	}
-
-	if (rc)
-		ir_free_table(rc_tab);
-
-	return rc;
-}
-
-/**
- * ir_lookup_by_scancode() - locate mapping by scancode
- * @rc_tab:	the &struct ir_scancode_table to search
- * @scancode:	scancode to look for in the table
- * @return:	index in the table, -1U if not found
- *
- * This routine performs binary search in RC keykeymap table for
- * given scancode.
- */
-static unsigned int ir_lookup_by_scancode(const struct ir_scancode_table *rc_tab,
-					  unsigned int scancode)
-{
-	int start = 0;
-	int end = rc_tab->len - 1;
-	int mid;
-
-	while (start <= end) {
-		mid = (start + end) / 2;
-		if (rc_tab->scan[mid].scancode < scancode)
-			start = mid + 1;
-		else if (rc_tab->scan[mid].scancode > scancode)
-			end = mid - 1;
-		else
-			return mid;
-	}
-
-	return -1U;
-}
-
-/**
- * ir_getkeycode() - get a keycode from the scancode->keycode table
- * @dev:	the struct input_dev device descriptor
- * @scancode:	the desired scancode
- * @keycode:	used to return the keycode, if found, or KEY_RESERVED
- * @return:	always returns zero.
- *
- * This routine is used to handle evdev EVIOCGKEY ioctl.
- */
-static int ir_getkeycode(struct input_dev *dev,
-			 struct input_keymap_entry *ke)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	struct ir_scancode *entry;
-	unsigned long flags;
-	unsigned int index;
-	unsigned int scancode;
-	int retval;
-
-	spin_lock_irqsave(&rc_tab->lock, flags);
-
-	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
-		index = ke->index;
-	} else {
-		retval = input_scancode_to_scalar(ke, &scancode);
-		if (retval)
-			goto out;
-
-		index = ir_lookup_by_scancode(rc_tab, scancode);
-	}
-
-	if (index >= rc_tab->len) {
-		if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
-			IR_dprintk(1, "unknown key for scancode 0x%04x\n",
-				   scancode);
-		retval = -EINVAL;
-		goto out;
-	}
-
-	entry = &rc_tab->scan[index];
-
-	ke->index = index;
-	ke->keycode = entry->keycode;
-	ke->len = sizeof(entry->scancode);
-	memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
-
-	retval = 0;
-
-out:
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
-	return retval;
-}
-
-/**
- * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
- * @input_dev:	the struct input_dev descriptor of the device
- * @scancode:	the scancode that we're seeking
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. The scancode is received and needs to be converted into a keycode.
- * If the key is not found, it returns KEY_RESERVED. Otherwise, returns the
- * corresponding keycode from the table.
- */
-u32 ir_g_keycode_from_table(struct input_dev *dev, u32 scancode)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(dev);
-	struct ir_scancode_table *rc_tab = &ir_dev->rc_tab;
-	unsigned int keycode;
-	unsigned int index;
-	unsigned long flags;
-
-	spin_lock_irqsave(&rc_tab->lock, flags);
-
-	index = ir_lookup_by_scancode(rc_tab, scancode);
-	keycode = index < rc_tab->len ?
-			rc_tab->scan[index].keycode : KEY_RESERVED;
-
-	spin_unlock_irqrestore(&rc_tab->lock, flags);
-
-	if (keycode != KEY_RESERVED)
-		IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
-			   dev->name, scancode, keycode);
-
-	return keycode;
-}
-EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
-
-/**
- * ir_keyup() - generates input event to cleanup a key press
- * @ir:         the struct ir_input_dev descriptor of the device
- *
- * This routine is used to signal that a key has been released on the
- * remote control. It reports a keyup input event via input_report_key().
- */
-void ir_keyup(struct ir_input_dev *ir)
-{
-	if (!ir->keypressed)
-		return;
-
-	IR_dprintk(1, "keyup key 0x%04x\n", ir->last_keycode);
-	input_report_key(ir->input_dev, ir->last_keycode, 0);
-	input_sync(ir->input_dev);
-	ir->keypressed = false;
-}
-EXPORT_SYMBOL_GPL(ir_keyup);
-
-/**
- * ir_timer_keyup() - generates a keyup event after a timeout
- * @cookie:     a pointer to struct ir_input_dev passed to setup_timer()
- *
- * This routine will generate a keyup event some time after a keydown event
- * is generated when no further activity has been detected.
- */
-static void ir_timer_keyup(unsigned long cookie)
-{
-	struct ir_input_dev *ir = (struct ir_input_dev *)cookie;
-	unsigned long flags;
-
-	/*
-	 * ir->keyup_jiffies is used to prevent a race condition if a
-	 * hardware interrupt occurs at this point and the keyup timer
-	 * event is moved further into the future as a result.
-	 *
-	 * The timer will then be reactivated and this function called
-	 * again in the future. We need to exit gracefully in that case
-	 * to allow the input subsystem to do its auto-repeat magic or
-	 * a keyup event might follow immediately after the keydown.
-	 */
-	spin_lock_irqsave(&ir->keylock, flags);
-	if (time_is_before_eq_jiffies(ir->keyup_jiffies))
-		ir_keyup(ir);
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-
-/**
- * ir_repeat() - notifies the IR core that a key is still pressed
- * @dev:        the struct input_dev descriptor of the device
- *
- * This routine is used by IR decoders when a repeat message which does
- * not include the necessary bits to reproduce the scancode has been
- * received.
- */
-void ir_repeat(struct input_dev *dev)
-{
-	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-
-	input_event(dev, EV_MSC, MSC_SCAN, ir->last_scancode);
-
-	if (!ir->keypressed)
-		goto out;
-
-	ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-	mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
-
-out:
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_repeat);
-
-/**
- * ir_keydown() - generates input event for a key press
- * @dev:        the struct input_dev descriptor of the device
- * @scancode:   the scancode that we're seeking
- * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
- *              support toggle values, this should be set to zero)
- *
- * This routine is used by the input routines when a key is pressed at the
- * IR. It gets the keycode for a scancode and reports an input event via
- * input_report_key().
- */
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle)
-{
-	unsigned long flags;
-	struct ir_input_dev *ir = input_get_drvdata(dev);
-
-	u32 keycode = ir_g_keycode_from_table(dev, scancode);
-
-	spin_lock_irqsave(&ir->keylock, flags);
-
-	input_event(dev, EV_MSC, MSC_SCAN, scancode);
-
-	/* Repeat event? */
-	if (ir->keypressed &&
-	    ir->last_scancode == scancode &&
-	    ir->last_toggle == toggle)
-		goto set_timer;
-
-	/* Release old keypress */
-	ir_keyup(ir);
-
-	ir->last_scancode = scancode;
-	ir->last_toggle = toggle;
-	ir->last_keycode = keycode;
-
-
-	if (keycode == KEY_RESERVED)
-		goto out;
-
-
-	/* Register a keypress */
-	ir->keypressed = true;
-	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
-		   dev->name, keycode, scancode);
-	input_report_key(dev, ir->last_keycode, 1);
-	input_sync(dev);
-
-set_timer:
-	ir->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-	mod_timer(&ir->timer_keyup, ir->keyup_jiffies);
-out:
-	spin_unlock_irqrestore(&ir->keylock, flags);
-}
-EXPORT_SYMBOL_GPL(ir_keydown);
-
-static int ir_open(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	return ir_dev->props->open(ir_dev->props->priv);
-}
-
-static void ir_close(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	ir_dev->props->close(ir_dev->props->priv);
-}
-
-/**
- * __ir_input_register() - sets the IR keycode table and add the handlers
- *			    for keymap table get/set
- * @input_dev:	the struct input_dev descriptor of the device
- * @rc_tab:	the struct ir_scancode_table table of scancode/keymap
- *
- * This routine is used to initialize the input infrastructure
- * to work with an IR.
- * It will register the input/evdev interface for the device and
- * register the syfs code for IR class
- */
-int __ir_input_register(struct input_dev *input_dev,
-		      const struct ir_scancode_table *rc_tab,
-		      struct ir_dev_props *props,
-		      const char *driver_name)
-{
-	struct ir_input_dev *ir_dev;
-	int rc;
-
-	if (rc_tab->scan == NULL || !rc_tab->size)
-		return -EINVAL;
-
-	ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
-	if (!ir_dev)
-		return -ENOMEM;
-
-	ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
-	if (!ir_dev->driver_name) {
-		rc = -ENOMEM;
-		goto out_dev;
-	}
-
-	input_dev->getkeycode_new = ir_getkeycode;
-	input_dev->setkeycode_new = ir_setkeycode;
-	input_set_drvdata(input_dev, ir_dev);
-	ir_dev->input_dev = input_dev;
-
-	spin_lock_init(&ir_dev->rc_tab.lock);
-	spin_lock_init(&ir_dev->keylock);
-	setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
-
-	if (props) {
-		ir_dev->props = props;
-		if (props->open)
-			input_dev->open = ir_open;
-		if (props->close)
-			input_dev->close = ir_close;
-	}
-
-	set_bit(EV_KEY, input_dev->evbit);
-	set_bit(EV_REP, input_dev->evbit);
-	set_bit(EV_MSC, input_dev->evbit);
-	set_bit(MSC_SCAN, input_dev->mscbit);
-
-	rc = ir_setkeytable(ir_dev, rc_tab);
-	if (rc)
-		goto out_name;
-
-	rc = ir_register_class(input_dev);
-	if (rc < 0)
-		goto out_table;
-
-	if (ir_dev->props)
-		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
-			rc = ir_raw_event_register(input_dev);
-			if (rc < 0)
-				goto out_event;
-		}
-
-	rc = ir_register_input(input_dev);
-	if (rc < 0)
-		goto out_event;
-
-	IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
-		   driver_name, rc_tab->name,
-		   (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
-			" in raw mode" : "");
-
-	/*
-	 * Default delay of 250ms is too short for some protocols, expecially
-	 * since the timeout is currently set to 250ms. Increase it to 500ms,
-	 * to avoid wrong repetition of the keycodes.
-	 */
-	input_dev->rep[REP_DELAY] = 500;
-
-	return 0;
-
-out_event:
-	ir_unregister_class(input_dev);
-out_table:
-	ir_free_table(&ir_dev->rc_tab);
-out_name:
-	kfree(ir_dev->driver_name);
-out_dev:
-	kfree(ir_dev);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(__ir_input_register);
-
-/**
- * ir_input_unregister() - unregisters IR and frees resources
- * @input_dev:	the struct input_dev descriptor of the device
-
- * This routine is used to free memory and de-register interfaces.
- */
-void ir_input_unregister(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	if (!ir_dev)
-		return;
-
-	IR_dprintk(1, "Freed keycode table\n");
-
-	del_timer_sync(&ir_dev->timer_keyup);
-	if (ir_dev->props)
-		if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
-			ir_raw_event_unregister(input_dev);
-
-	ir_free_table(&ir_dev->rc_tab);
-
-	ir_unregister_class(input_dev);
-
-	kfree(ir_dev->driver_name);
-	kfree(ir_dev);
-}
-EXPORT_SYMBOL_GPL(ir_input_unregister);
-
-int ir_core_debug;    /* ir_debug level (0,1,2) */
-EXPORT_SYMBOL_GPL(ir_core_debug);
-module_param_named(debug, ir_core_debug, int, 0644);
-
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c
deleted file mode 100644
index 38423a8da87..00000000000
--- a/drivers/media/IR/ir-sysfs.c
+++ /dev/null
@@ -1,362 +0,0 @@
-/* ir-sysfs.c - sysfs interface for RC devices (/sys/class/rc)
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <linux/slab.h>
-#include <linux/input.h>
-#include <linux/device.h>
-#include "ir-core-priv.h"
-
-#define IRRCV_NUM_DEVICES	256
-
-/* bit array to represent IR sysfs device number */
-static unsigned long ir_core_dev_number;
-
-/* class for /sys/class/rc */
-static char *ir_devnode(struct device *dev, mode_t *mode)
-{
-	return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
-}
-
-static struct class ir_input_class = {
-	.name		= "rc",
-	.devnode	= ir_devnode,
-};
-
-static struct {
-	u64	type;
-	char	*name;
-} proto_names[] = {
-	{ IR_TYPE_UNKNOWN,	"unknown"	},
-	{ IR_TYPE_RC5,		"rc-5"		},
-	{ IR_TYPE_NEC,		"nec"		},
-	{ IR_TYPE_RC6,		"rc-6"		},
-	{ IR_TYPE_JVC,		"jvc"		},
-	{ IR_TYPE_SONY,		"sony"		},
-	{ IR_TYPE_RC5_SZ,	"rc-5-sz"	},
-	{ IR_TYPE_LIRC,		"lirc"		},
-};
-
-#define PROTO_NONE	"none"
-
-/**
- * show_protocols() - shows the current IR protocol(s)
- * @d:		the device descriptor
- * @mattr:	the device attribute struct (unused)
- * @buf:	a pointer to the output buffer
- *
- * This routine is a callback routine for input read the IR protocol type(s).
- * it is trigged by reading /sys/class/rc/rc?/protocols.
- * It returns the protocol names of supported protocols.
- * Enabled protocols are printed in brackets.
- */
-static ssize_t show_protocols(struct device *d,
-			      struct device_attribute *mattr, char *buf)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	u64 allowed, enabled;
-	char *tmp = buf;
-	int i;
-
-	/* Device is being removed */
-	if (!ir_dev)
-		return -EINVAL;
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
-		enabled = ir_dev->rc_tab.ir_type;
-		allowed = ir_dev->props->allowed_protos;
-	} else if (ir_dev->raw) {
-		enabled = ir_dev->raw->enabled_protocols;
-		allowed = ir_raw_get_allowed_protocols();
-	} else
-		return sprintf(tmp, "[builtin]\n");
-
-	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
-		   (long long)allowed,
-		   (long long)enabled);
-
-	for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
-		if (allowed & enabled & proto_names[i].type)
-			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
-		else if (allowed & proto_names[i].type)
-			tmp += sprintf(tmp, "%s ", proto_names[i].name);
-	}
-
-	if (tmp != buf)
-		tmp--;
-	*tmp = '\n';
-	return tmp + 1 - buf;
-}
-
-/**
- * store_protocols() - changes the current IR protocol(s)
- * @d:		the device descriptor
- * @mattr:	the device attribute struct (unused)
- * @buf:	a pointer to the input buffer
- * @len:	length of the input buffer
- *
- * This routine is a callback routine for changing the IR protocol type.
- * It is trigged by writing to /sys/class/rc/rc?/protocols.
- * Writing "+proto" will add a protocol to the list of enabled protocols.
- * Writing "-proto" will remove a protocol from the list of enabled protocols.
- * Writing "proto" will enable only "proto".
- * Writing "none" will disable all protocols.
- * Returns -EINVAL if an invalid protocol combination or unknown protocol name
- * is used, otherwise @len.
- */
-static ssize_t store_protocols(struct device *d,
-			       struct device_attribute *mattr,
-			       const char *data,
-			       size_t len)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(d);
-	bool enable, disable;
-	const char *tmp;
-	u64 type;
-	u64 mask;
-	int rc, i, count = 0;
-	unsigned long flags;
-
-	/* Device is being removed */
-	if (!ir_dev)
-		return -EINVAL;
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE)
-		type = ir_dev->rc_tab.ir_type;
-	else if (ir_dev->raw)
-		type = ir_dev->raw->enabled_protocols;
-	else {
-		IR_dprintk(1, "Protocol switching not supported\n");
-		return -EINVAL;
-	}
-
-	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
-		if (!*tmp)
-			break;
-
-		if (*tmp == '+') {
-			enable = true;
-			disable = false;
-			tmp++;
-		} else if (*tmp == '-') {
-			enable = false;
-			disable = true;
-			tmp++;
-		} else {
-			enable = false;
-			disable = false;
-		}
-
-		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
-			tmp += sizeof(PROTO_NONE);
-			mask = 0;
-			count++;
-		} else {
-			for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
-				if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
-					tmp += strlen(proto_names[i].name);
-					mask = proto_names[i].type;
-					break;
-				}
-			}
-			if (i == ARRAY_SIZE(proto_names)) {
-				IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
-				return -EINVAL;
-			}
-			count++;
-		}
-
-		if (enable)
-			type |= mask;
-		else if (disable)
-			type &= ~mask;
-		else
-			type = mask;
-	}
-
-	if (!count) {
-		IR_dprintk(1, "Protocol not specified\n");
-		return -EINVAL;
-	}
-
-	if (ir_dev->props && ir_dev->props->change_protocol) {
-		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
-						    type);
-		if (rc < 0) {
-			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
-				   (long long)type);
-			return -EINVAL;
-		}
-	}
-
-	if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) {
-		spin_lock_irqsave(&ir_dev->rc_tab.lock, flags);
-		ir_dev->rc_tab.ir_type = type;
-		spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags);
-	} else {
-		ir_dev->raw->enabled_protocols = type;
-	}
-
-	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
-		   (long long)type);
-
-	return len;
-}
-
-#define ADD_HOTPLUG_VAR(fmt, val...)					\
-	do {								\
-		int err = add_uevent_var(env, fmt, val);		\
-		if (err)						\
-			return err;					\
-	} while (0)
-
-static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
-{
-	struct ir_input_dev *ir_dev = dev_get_drvdata(device);
-
-	if (ir_dev->rc_tab.name)
-		ADD_HOTPLUG_VAR("NAME=%s", ir_dev->rc_tab.name);
-	if (ir_dev->driver_name)
-		ADD_HOTPLUG_VAR("DRV_NAME=%s", ir_dev->driver_name);
-
-	return 0;
-}
-
-/*
- * Static device attribute struct with the sysfs attributes for IR's
- */
-static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
-		   show_protocols, store_protocols);
-
-static struct attribute *rc_dev_attrs[] = {
-	&dev_attr_protocols.attr,
-	NULL,
-};
-
-static struct attribute_group rc_dev_attr_grp = {
-	.attrs	= rc_dev_attrs,
-};
-
-static const struct attribute_group *rc_dev_attr_groups[] = {
-	&rc_dev_attr_grp,
-	NULL
-};
-
-static struct device_type rc_dev_type = {
-	.groups		= rc_dev_attr_groups,
-	.uevent		= rc_dev_uevent,
-};
-
-/**
- * ir_register_class() - creates the sysfs for /sys/class/rc/rc?
- * @input_dev:	the struct input_dev descriptor of the device
- *
- * This routine is used to register the syfs code for IR class
- */
-int ir_register_class(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	int devno = find_first_zero_bit(&ir_core_dev_number,
-					IRRCV_NUM_DEVICES);
-
-	if (unlikely(devno < 0))
-		return devno;
-
-	ir_dev->dev.type = &rc_dev_type;
-	ir_dev->devno = devno;
-
-	ir_dev->dev.class = &ir_input_class;
-	ir_dev->dev.parent = input_dev->dev.parent;
-	input_dev->dev.parent = &ir_dev->dev;
-	dev_set_name(&ir_dev->dev, "rc%d", devno);
-	dev_set_drvdata(&ir_dev->dev, ir_dev);
-	return  device_register(&ir_dev->dev);
-};
-
-/**
- * ir_register_input - registers ir input device with input subsystem
- * @input_dev:	the struct input_dev descriptor of the device
- */
-
-int ir_register_input(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	int rc;
-	const char *path;
-
-
-	rc = input_register_device(input_dev);
-	if (rc < 0) {
-		device_del(&ir_dev->dev);
-		return rc;
-	}
-
-	__module_get(THIS_MODULE);
-
-	path = kobject_get_path(&ir_dev->dev.kobj, GFP_KERNEL);
-	printk(KERN_INFO "%s: %s as %s\n",
-		dev_name(&ir_dev->dev),
-		input_dev->name ? input_dev->name : "Unspecified device",
-		path ? path : "N/A");
-	kfree(path);
-
-	set_bit(ir_dev->devno, &ir_core_dev_number);
-	return 0;
-}
-
-/**
- * ir_unregister_class() - removes the sysfs for sysfs for
- *			   /sys/class/rc/rc?
- * @input_dev:	the struct input_dev descriptor of the device
- *
- * This routine is used to unregister the syfs code for IR class
- */
-void ir_unregister_class(struct input_dev *input_dev)
-{
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-
-	input_set_drvdata(input_dev, NULL);
-	clear_bit(ir_dev->devno, &ir_core_dev_number);
-	input_unregister_device(input_dev);
-	device_del(&ir_dev->dev);
-
-	module_put(THIS_MODULE);
-}
-
-/*
- * Init/exit code for the module. Basically, creates/removes /sys/class/rc
- */
-
-static int __init ir_core_init(void)
-{
-	int rc = class_register(&ir_input_class);
-	if (rc) {
-		printk(KERN_ERR "ir_core: unable to register rc class\n");
-		return rc;
-	}
-
-	/* Initialize/load the decoders/keymap code that will be used */
-	ir_raw_init();
-	ir_rcmap_init();
-
-	return 0;
-}
-
-static void __exit ir_core_exit(void)
-{
-	class_unregister(&ir_input_class);
-	ir_rcmap_cleanup();
-}
-
-module_init(ir_core_init);
-module_exit(ir_core_exit);
diff --git a/drivers/media/IR/keymaps/rc-tbs-nec.c b/drivers/media/IR/keymaps/rc-tbs-nec.c
deleted file mode 100644
index 3309631e6f8..00000000000
--- a/drivers/media/IR/keymaps/rc-tbs-nec.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/* tbs-nec.h - Keytable for tbs_nec Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-static struct ir_scancode tbs_nec[] = {
-	{ 0x04, KEY_POWER2},	/*power*/
-	{ 0x14, KEY_MUTE},	/*mute*/
-	{ 0x07, KEY_1},
-	{ 0x06, KEY_2},
-	{ 0x05, KEY_3},
-	{ 0x0b, KEY_4},
-	{ 0x0a, KEY_5},
-	{ 0x09, KEY_6},
-	{ 0x0f, KEY_7},
-	{ 0x0e, KEY_8},
-	{ 0x0d, KEY_9},
-	{ 0x12, KEY_0},
-	{ 0x16, KEY_CHANNELUP},	/*ch+*/
-	{ 0x11, KEY_CHANNELDOWN},/*ch-*/
-	{ 0x13, KEY_VOLUMEUP},	/*vol+*/
-	{ 0x0c, KEY_VOLUMEDOWN},/*vol-*/
-	{ 0x03, KEY_RECORD},	/*rec*/
-	{ 0x18, KEY_PAUSE},	/*pause*/
-	{ 0x19, KEY_OK},	/*ok*/
-	{ 0x1a, KEY_CAMERA},	/* snapshot */
-	{ 0x01, KEY_UP},
-	{ 0x10, KEY_LEFT},
-	{ 0x02, KEY_RIGHT},
-	{ 0x08, KEY_DOWN},
-	{ 0x15, KEY_FAVORITES},
-	{ 0x17, KEY_SUBTITLE},
-	{ 0x1d, KEY_ZOOM},
-	{ 0x1f, KEY_EXIT},
-	{ 0x1e, KEY_MENU},
-	{ 0x1c, KEY_EPG},
-	{ 0x00, KEY_PREVIOUS},
-	{ 0x1b, KEY_MODE},
-};
-
-static struct rc_keymap tbs_nec_map = {
-	.map = {
-		.scan    = tbs_nec,
-		.size    = ARRAY_SIZE(tbs_nec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_TBS_NEC,
-	}
-};
-
-static int __init init_rc_map_tbs_nec(void)
-{
-	return ir_register_map(&tbs_nec_map);
-}
-
-static void __exit exit_rc_map_tbs_nec(void)
-{
-	ir_unregister_map(&tbs_nec_map);
-}
-
-module_init(init_rc_map_tbs_nec)
-module_exit(exit_rc_map_tbs_nec)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-tt-1500.c b/drivers/media/IR/keymaps/rc-tt-1500.c
deleted file mode 100644
index bc88de011d5..00000000000
--- a/drivers/media/IR/keymaps/rc-tt-1500.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/* tt-1500.h - Keytable for tt_1500 Remote Controller
- *
- * keymap imported from ir-keymaps.c
- *
- * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <media/rc-map.h>
-
-/* for the Technotrend 1500 bundled remotes (grey and black): */
-
-static struct ir_scancode tt_1500[] = {
-	{ 0x01, KEY_POWER },
-	{ 0x02, KEY_SHUFFLE },		/* ? double-arrow key */
-	{ 0x03, KEY_1 },
-	{ 0x04, KEY_2 },
-	{ 0x05, KEY_3 },
-	{ 0x06, KEY_4 },
-	{ 0x07, KEY_5 },
-	{ 0x08, KEY_6 },
-	{ 0x09, KEY_7 },
-	{ 0x0a, KEY_8 },
-	{ 0x0b, KEY_9 },
-	{ 0x0c, KEY_0 },
-	{ 0x0d, KEY_UP },
-	{ 0x0e, KEY_LEFT },
-	{ 0x0f, KEY_OK },
-	{ 0x10, KEY_RIGHT },
-	{ 0x11, KEY_DOWN },
-	{ 0x12, KEY_INFO },
-	{ 0x13, KEY_EXIT },
-	{ 0x14, KEY_RED },
-	{ 0x15, KEY_GREEN },
-	{ 0x16, KEY_YELLOW },
-	{ 0x17, KEY_BLUE },
-	{ 0x18, KEY_MUTE },
-	{ 0x19, KEY_TEXT },
-	{ 0x1a, KEY_MODE },		/* ? TV/Radio */
-	{ 0x21, KEY_OPTION },
-	{ 0x22, KEY_EPG },
-	{ 0x23, KEY_CHANNELUP },
-	{ 0x24, KEY_CHANNELDOWN },
-	{ 0x25, KEY_VOLUMEUP },
-	{ 0x26, KEY_VOLUMEDOWN },
-	{ 0x27, KEY_SETUP },
-	{ 0x3a, KEY_RECORD },		/* these keys are only in the black remote */
-	{ 0x3b, KEY_PLAY },
-	{ 0x3c, KEY_STOP },
-	{ 0x3d, KEY_REWIND },
-	{ 0x3e, KEY_PAUSE },
-	{ 0x3f, KEY_FORWARD },
-};
-
-static struct rc_keymap tt_1500_map = {
-	.map = {
-		.scan    = tt_1500,
-		.size    = ARRAY_SIZE(tt_1500),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_TT_1500,
-	}
-};
-
-static int __init init_rc_map_tt_1500(void)
-{
-	return ir_register_map(&tt_1500_map);
-}
-
-static void __exit exit_rc_map_tt_1500(void)
-{
-	ir_unregister_map(&tt_1500_map);
-}
-
-module_init(init_rc_map_tt_1500)
-module_exit(exit_rc_map_tt_1500)
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/rc-map.c b/drivers/media/IR/rc-map.c
deleted file mode 100644
index 689143f2fff..00000000000
--- a/drivers/media/IR/rc-map.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/* ir-raw-event.c - handle IR Pulse/Space event
- *
- * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#include <media/ir-core.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-
-/* Used to handle IR raw handler extensions */
-static LIST_HEAD(rc_map_list);
-static DEFINE_SPINLOCK(rc_map_lock);
-
-static struct rc_keymap *seek_rc_map(const char *name)
-{
-	struct rc_keymap *map = NULL;
-
-	spin_lock(&rc_map_lock);
-	list_for_each_entry(map, &rc_map_list, list) {
-		if (!strcmp(name, map->map.name)) {
-			spin_unlock(&rc_map_lock);
-			return map;
-		}
-	}
-	spin_unlock(&rc_map_lock);
-
-	return NULL;
-}
-
-struct ir_scancode_table *get_rc_map(const char *name)
-{
-
-	struct rc_keymap *map;
-
-	map = seek_rc_map(name);
-#ifdef MODULE
-	if (!map) {
-		int rc = request_module(name);
-		if (rc < 0) {
-			printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
-			return NULL;
-		}
-		msleep(20);	/* Give some time for IR to register */
-
-		map = seek_rc_map(name);
-	}
-#endif
-	if (!map) {
-		printk(KERN_ERR "IR keymap %s not found\n", name);
-		return NULL;
-	}
-
-	printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
-
-	return &map->map;
-}
-EXPORT_SYMBOL_GPL(get_rc_map);
-
-int ir_register_map(struct rc_keymap *map)
-{
-	spin_lock(&rc_map_lock);
-	list_add_tail(&map->list, &rc_map_list);
-	spin_unlock(&rc_map_lock);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(ir_register_map);
-
-void ir_unregister_map(struct rc_keymap *map)
-{
-	spin_lock(&rc_map_lock);
-	list_del(&map->list);
-	spin_unlock(&rc_map_lock);
-}
-EXPORT_SYMBOL_GPL(ir_unregister_map);
-
-
-static struct ir_scancode empty[] = {
-	{ 0x2a, KEY_COFFEE },
-};
-
-static struct rc_keymap empty_map = {
-	.map = {
-		.scan    = empty,
-		.size    = ARRAY_SIZE(empty),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
-		.name    = RC_MAP_EMPTY,
-	}
-};
-
-int ir_rcmap_init(void)
-{
-	return ir_register_map(&empty_map);
-}
-
-void ir_rcmap_cleanup(void)
-{
-	ir_unregister_map(&empty_map);
-}
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index bad2cedb8d9..81b3ba83cc6 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -19,7 +19,6 @@ comment "Multimedia core support"
 
 config VIDEO_DEV
 	tristate "Video For Linux"
-	depends on BKL # used in many drivers for ioctl handling, need to kill
 	---help---
 	  V4L core support for video capture and overlay devices, webcams and
 	  AM/FM radio cards.
@@ -41,35 +40,6 @@ config VIDEO_V4L2_COMMON
 	depends on (I2C || I2C=n) && VIDEO_DEV
 	default (I2C || I2C=n) && VIDEO_DEV
 
-config VIDEO_ALLOW_V4L1
-	bool "Enable Video For Linux API 1 (DEPRECATED)"
-	depends on VIDEO_DEV && VIDEO_V4L2_COMMON
-	default VIDEO_DEV && VIDEO_V4L2_COMMON
-	---help---
-	  Enables drivers based on the legacy V4L1 API.
-
-	  This api were developed to be used at Kernel 2.2 and 2.4, but
-	  lacks support for several video standards. There are several
-	  drivers at kernel that still depends on it.
-
-	  If you are unsure as to whether this is required, answer Y.
-
-config VIDEO_V4L1_COMPAT
-	bool "Enable Video For Linux API 1 compatible Layer" if !VIDEO_ALLOW_V4L1
-	depends on VIDEO_DEV
-	default y
-	---help---
-	  Enables a compatibility API used by most V4L2 devices to allow
-	  its usage with legacy applications that supports only V4L1 api.
-
-	  Documentation for the original API is included in the file
-	  <Documentation/video4linux/API.html>.
-
-	  User tools for this are available from
-	  <ftp://ftp.uk.linux.org/pub/linux/video4linux/>.
-
-	  If you are unsure as to whether this is required, answer Y.
-
 #
 # DVB Core
 #
@@ -100,7 +70,7 @@ config VIDEO_MEDIA
 comment "Multimedia drivers"
 
 source "drivers/media/common/Kconfig"
-source "drivers/media/IR/Kconfig"
+source "drivers/media/rc/Kconfig"
 
 #
 # Tuner drivers for DVB and V4L
@@ -122,26 +92,4 @@ source "drivers/media/radio/Kconfig"
 
 source "drivers/media/dvb/Kconfig"
 
-config DAB
-	boolean "DAB adapters"
-	---help---
-	  Allow selecting support for Digital Audio Broadcasting (DAB)
-	  Receiver adapters.
-
-if DAB
-config USB_DABUSB
-	tristate "DABUSB driver"
-	depends on USB
-	---help---
-	  A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
-	  brought to you by the DAB-Team
-	  <http://wwwbode.cs.tum.edu/Par/arch/dab/>.  This driver can be taken
-	  as an example for URB-based bulk, control, and isochronous
-	  transactions. URB's are explained in
-	  <Documentation/usb/URB.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called dabusb.
-endif # DAB
-
 endif # MEDIA_SUPPORT
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index 499b0810d01..b603ea645ed 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
-obj-y += common/ IR/ video/
+obj-y += common/ rc/ video/
 
 obj-$(CONFIG_VIDEO_DEV) += radio/
 obj-$(CONFIG_DVB_CORE)  += dvb/
diff --git a/drivers/media/common/saa7146_hlp.c b/drivers/media/common/saa7146_hlp.c
index 05bde9ccb77..1d1d8d20075 100644
--- a/drivers/media/common/saa7146_hlp.c
+++ b/drivers/media/common/saa7146_hlp.c
@@ -558,7 +558,7 @@ static void saa7146_set_window(struct saa7146_dev *dev, int width, int height, e
 static void saa7146_set_position(struct saa7146_dev *dev, int w_x, int w_y, int w_height, enum v4l2_field field, u32 pixelformat)
 {
 	struct saa7146_vv *vv = dev->vv_data;
-	struct saa7146_format *sfmt = format_by_fourcc(dev, pixelformat);
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev, pixelformat);
 
 	int b_depth = vv->ov_fmt->depth;
 	int b_bpl = vv->ov_fb.fmt.bytesperline;
@@ -702,7 +702,7 @@ static int calculate_video_dma_grab_packed(struct saa7146_dev* dev, struct saa71
 	struct saa7146_vv *vv = dev->vv_data;
 	struct saa7146_video_dma vdma1;
 
-	struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 
 	int width = buf->fmt->width;
 	int height = buf->fmt->height;
@@ -827,7 +827,7 @@ static int calculate_video_dma_grab_planar(struct saa7146_dev* dev, struct saa71
 	struct saa7146_video_dma vdma2;
 	struct saa7146_video_dma vdma3;
 
-	struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 
 	int width = buf->fmt->width;
 	int height = buf->fmt->height;
@@ -994,7 +994,7 @@ static void program_capture_engine(struct saa7146_dev *dev, int planar)
 
 void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
 {
-	struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 	struct saa7146_vv *vv = dev->vv_data;
 	u32 vdma1_prot_addr;
 
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 3d88542612e..74ee172b5bc 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -391,7 +391,6 @@ static int saa7146_i2c_xfer(struct i2c_adapter* adapter, struct i2c_msg *msg, in
 
 /*****************************************************************************/
 /* i2c-adapter helper functions                                              */
-#include <linux/i2c-id.h>
 
 /* exported algorithm data */
 static struct i2c_algorithm saa7146_algo = {
diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index 741c5732b43..0ac5c619aec 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -84,7 +84,7 @@ static struct saa7146_format formats[] = {
 
 static int NUM_FORMATS = sizeof(formats)/sizeof(struct saa7146_format);
 
-struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc)
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc)
 {
 	int i, j = NUM_FORMATS;
 
@@ -266,7 +266,7 @@ static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *bu
 	struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
 	struct scatterlist *list = dma->sglist;
 	int length = dma->sglen;
-	struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+	struct saa7146_format *sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 
 	DEB_EE(("dev:%p, buf:%p, sg_len:%d\n",dev,buf,length));
 
@@ -408,7 +408,7 @@ static int video_begin(struct saa7146_fh *fh)
 		}
 	}
 
-	fmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+	fmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
 	/* we need to have a valid format set here */
 	BUG_ON(NULL == fmt);
 
@@ -460,7 +460,7 @@ static int video_end(struct saa7146_fh *fh, struct file *file)
 		return -EBUSY;
 	}
 
-	fmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+	fmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
 	/* we need to have a valid format set here */
 	BUG_ON(NULL == fmt);
 
@@ -536,7 +536,7 @@ static int vidioc_s_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *f
 		return -EPERM;
 
 	/* check args */
-	fmt = format_by_fourcc(dev, fb->fmt.pixelformat);
+	fmt = saa7146_format_by_fourcc(dev, fb->fmt.pixelformat);
 	if (NULL == fmt)
 		return -EINVAL;
 
@@ -760,7 +760,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *fh, struct v4l2_forma
 
 	DEB_EE(("V4L2_BUF_TYPE_VIDEO_CAPTURE: dev:%p, fh:%p\n", dev, fh));
 
-	fmt = format_by_fourcc(dev, f->fmt.pix.pixelformat);
+	fmt = saa7146_format_by_fourcc(dev, f->fmt.pix.pixelformat);
 	if (NULL == fmt)
 		return -EINVAL;
 
@@ -1129,35 +1129,6 @@ static int vidioc_g_chip_ident(struct file *file, void *__fh,
 			core, g_chip_ident, chip);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *__fh, struct video_mbuf *mbuf)
-{
-	struct saa7146_fh *fh = __fh;
-	struct videobuf_queue *q = &fh->video_q;
-	int err, i;
-
-	/* fixme: number of capture buffers and sizes for v4l apps */
-	int gbuffers = 2;
-	int gbufsize = 768 * 576 * 4;
-
-	DEB_D(("VIDIOCGMBUF \n"));
-
-	q = &fh->video_q;
-	err = videobuf_mmap_setup(q, gbuffers, gbufsize,
-			V4L2_MEMORY_MMAP);
-	if (err < 0)
-		return err;
-
-	gbuffers = err;
-	memset(mbuf, 0, sizeof(*mbuf));
-	mbuf->frames = gbuffers;
-	mbuf->size   = gbuffers * gbufsize;
-	for (i = 0; i < gbuffers; i++)
-		mbuf->offsets[i] = i * gbufsize;
-	return 0;
-}
-#endif
-
 const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
 	.vidioc_querycap             = vidioc_querycap,
 	.vidioc_enum_fmt_vid_cap     = vidioc_enum_fmt_vid_cap,
@@ -1186,9 +1157,6 @@ const struct v4l2_ioctl_ops saa7146_video_ioctl_ops = {
 	.vidioc_streamon             = vidioc_streamon,
 	.vidioc_streamoff            = vidioc_streamoff,
 	.vidioc_g_parm 		     = vidioc_g_parm,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf                 = vidiocgmbuf,
-#endif
 };
 
 /*********************************************************************************/
@@ -1264,7 +1232,7 @@ static int buffer_prepare(struct videobuf_queue *q,
 		buf->fmt       = &fh->video_fmt;
 		buf->vb.field  = fh->video_fmt.field;
 
-		sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
+		sfmt = saa7146_format_by_fourcc(dev,buf->fmt->pixelformat);
 
 		release_all_pagetables(dev, buf);
 		if( 0 != IS_PLANAR(sfmt->trans)) {
@@ -1378,7 +1346,7 @@ static int video_open(struct saa7146_dev *dev, struct file *file)
 	fh->video_fmt.pixelformat = V4L2_PIX_FMT_BGR24;
 	fh->video_fmt.bytesperline = 0;
 	fh->video_fmt.field = V4L2_FIELD_ANY;
-	sfmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
+	sfmt = saa7146_format_by_fourcc(dev,fh->video_fmt.pixelformat);
 	fh->video_fmt.sizeimage = (fh->video_fmt.width * fh->video_fmt.height * sfmt->depth)/8;
 
 	videobuf_queue_sg_init(&fh->video_q, &video_qops,
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 2385e6cca63..78b089526e0 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -31,7 +31,7 @@ config MEDIA_TUNER
 	select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE
 
-menuconfig MEDIA_TUNER_CUSTOMISE
+config MEDIA_TUNER_CUSTOMISE
 	bool "Customize analog and hybrid tuner modules to build"
 	depends on MEDIA_TUNER
 	default y if EMBEDDED
@@ -44,7 +44,8 @@ menuconfig MEDIA_TUNER_CUSTOMISE
 
 	  If unsure say N.
 
-if MEDIA_TUNER_CUSTOMISE
+menu "Customize TV tuners"
+	visible if MEDIA_TUNER_CUSTOMISE
 
 config MEDIA_TUNER_SIMPLE
 	tristate "Simple tuner support"
@@ -185,5 +186,4 @@ config MEDIA_TUNER_TDA18218
 	default m if MEDIA_TUNER_CUSTOMISE
 	help
 	  NXP TDA18218 silicon tuner driver.
-
-endif # MEDIA_TUNER_CUSTOMISE
+endmenu
diff --git a/drivers/media/common/tuners/max2165.c b/drivers/media/common/tuners/max2165.c
index 937e4b00d7e..9883617b786 100644
--- a/drivers/media/common/tuners/max2165.c
+++ b/drivers/media/common/tuners/max2165.c
@@ -52,13 +52,12 @@ static int max2165_write_reg(struct max2165_priv *priv, u8 reg, u8 data)
 	msg.addr = priv->config->i2c_address;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg, 1);
 
 	if (ret != 1)
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, data=0x%x, ret=%i\n",
+		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
 			__func__, reg, data, ret);
 
 	return (ret != 1) ? -EIO : 0;
@@ -78,14 +77,13 @@ static int max2165_read_reg(struct max2165_priv *priv, u8 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, msg, 2);
 	if (ret != 2) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret);
 		return -EIO;
 	}
 
 	*p_data = b1[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
+		dprintk("%s: reg=0x%02X, data=0x%02X\n",
 			__func__, reg, b1[0]);
 	return 0;
 }
diff --git a/drivers/media/common/tuners/tda18218.c b/drivers/media/common/tuners/tda18218.c
index 8da1fdeddaa..aacfe2387e2 100644
--- a/drivers/media/common/tuners/tda18218.c
+++ b/drivers/media/common/tuners/tda18218.c
@@ -28,7 +28,7 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
 /* write multiple registers */
 static int tda18218_wr_regs(struct tda18218_priv *priv, u8 reg, u8 *val, u8 len)
 {
-	int ret;
+	int ret = 0;
 	u8 buf[1+len], quotient, remainder, i, msg_len, msg_len_max;
 	struct i2c_msg msg[1] = {
 		{
diff --git a/drivers/media/dvb/dm1105/Kconfig b/drivers/media/dvb/dm1105/Kconfig
index a6ceb08f118..f3de0a4d63f 100644
--- a/drivers/media/dvb/dm1105/Kconfig
+++ b/drivers/media/dvb/dm1105/Kconfig
@@ -1,7 +1,6 @@
 config DVB_DM1105
 	tristate "SDMC DM1105 based PCI cards"
 	depends on DVB_CORE && PCI && I2C
-	depends on INPUT
 	select DVB_PLL if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
 	select DVB_STV0288 if !DVB_FE_CUSTOMISE
@@ -9,7 +8,7 @@ config DVB_DM1105
 	select DVB_CX24116 if !DVB_FE_CUSTOMISE
 	select DVB_SI21XX if !DVB_FE_CUSTOMISE
 	select DVB_DS3000 if !DVB_FE_CUSTOMISE
-	depends on VIDEO_IR
+	depends on RC_CORE
 	help
 	  Support for cards based on the SDMC DM1105 PCI chip like
 	  DvbWorld 2002
diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c
index 5d404f1bf03..2d8b4044be3 100644
--- a/drivers/media/dvb/dm1105/dm1105.c
+++ b/drivers/media/dvb/dm1105/dm1105.c
@@ -26,9 +26,8 @@
 #include <linux/proc_fs.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
-#include <linux/input.h>
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "demux.h"
 #include "dmxdev.h"
@@ -266,7 +265,7 @@ static void dm1105_card_list(struct pci_dev *pci)
 
 /* infrared remote control */
 struct infrared {
-	struct input_dev	*input_dev;
+	struct rc_dev		*dev;
 	char			input_phys[32];
 	struct work_struct	work;
 	u32			ir_command;
@@ -532,7 +531,7 @@ static void dm1105_emit_key(struct work_struct *work)
 
 	data = (ircom >> 8) & 0x7f;
 
-	ir_keydown(ir->input_dev, data, 0);
+	rc_keydown(ir->dev, data, 0);
 }
 
 /* work handler */
@@ -593,46 +592,47 @@ static irqreturn_t dm1105_irq(int irq, void *dev_id)
 
 int __devinit dm1105_ir_init(struct dm1105_dev *dm1105)
 {
-	struct input_dev *input_dev;
-	char *ir_codes = RC_MAP_DM1105_NEC;
+	struct rc_dev *dev;
 	int err = -ENOMEM;
 
-	input_dev = input_allocate_device();
-	if (!input_dev)
+	dev = rc_allocate_device();
+	if (!dev)
 		return -ENOMEM;
 
-	dm1105->ir.input_dev = input_dev;
 	snprintf(dm1105->ir.input_phys, sizeof(dm1105->ir.input_phys),
 		"pci-%s/ir0", pci_name(dm1105->pdev));
 
-	input_dev->name = "DVB on-card IR receiver";
-	input_dev->phys = dm1105->ir.input_phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	dev->driver_name = MODULE_NAME;
+	dev->map_name = RC_MAP_DM1105_NEC;
+	dev->driver_type = RC_DRIVER_SCANCODE;
+	dev->input_name = "DVB on-card IR receiver";
+	dev->input_phys = dm1105->ir.input_phys;
+	dev->input_id.bustype = BUS_PCI;
+	dev->input_id.version = 1;
 	if (dm1105->pdev->subsystem_vendor) {
-		input_dev->id.vendor = dm1105->pdev->subsystem_vendor;
-		input_dev->id.product = dm1105->pdev->subsystem_device;
+		dev->input_id.vendor = dm1105->pdev->subsystem_vendor;
+		dev->input_id.product = dm1105->pdev->subsystem_device;
 	} else {
-		input_dev->id.vendor = dm1105->pdev->vendor;
-		input_dev->id.product = dm1105->pdev->device;
+		dev->input_id.vendor = dm1105->pdev->vendor;
+		dev->input_id.product = dm1105->pdev->device;
 	}
-
-	input_dev->dev.parent = &dm1105->pdev->dev;
+	dev->dev.parent = &dm1105->pdev->dev;
 
 	INIT_WORK(&dm1105->ir.work, dm1105_emit_key);
 
-	err = ir_input_register(input_dev, ir_codes, NULL, MODULE_NAME);
+	err = rc_register_device(dev);
 	if (err < 0) {
-		input_free_device(input_dev);
+		rc_free_device(dev);
 		return err;
 	}
 
+	dm1105->ir.dev = dev;
 	return 0;
 }
 
 void __devexit dm1105_ir_exit(struct dm1105_dev *dm1105)
 {
-	ir_input_unregister(dm1105->ir.input_dev);
+	rc_unregister_device(dm1105->ir.dev);
 }
 
 static int __devinit dm1105_hw_init(struct dm1105_dev *dev)
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index ad1f61d301e..e4b5c03ae51 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -572,13 +572,13 @@ static int dvb_dmxdev_start_feed(struct dmxdev *dmxdev,
 	dmx_output_t otype;
 	int ret;
 	int ts_type;
-	enum dmx_ts_pes ts_pes;
+	dmx_pes_type_t ts_pes;
 	struct dmx_ts_feed *tsfeed;
 
 	feed->ts = NULL;
 	otype = para->output;
 
-	ts_pes = (enum dmx_ts_pes)para->pes_type;
+	ts_pes = para->pes_type;
 
 	if (ts_pes < DMX_PES_OTHER)
 		ts_type = TS_DECODER;
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index 4d0646da608..7ea517b7e18 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -36,7 +36,6 @@
 #include <linux/delay.h>
 #include <linux/spinlock.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/kthread.h>
 
 #include "dvb_ca_en50221.h"
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 1589d5a5cb4..cad6634610e 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -36,7 +36,6 @@
 #include <linux/list.h>
 #include <linux/freezer.h>
 #include <linux/jiffies.h>
-#include <linux/smp_lock.h>
 #include <linux/kthread.h>
 #include <asm/processor.h>
 
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 4df42aaae7f..51752a9ef7a 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -1329,7 +1329,8 @@ static int dvb_net_remove_if(struct dvb_net *dvbnet, unsigned long num)
 		return -EBUSY;
 
 	dvb_net_stop(net);
-	flush_scheduled_work();
+	flush_work_sync(&priv->set_multicast_list_wq);
+	flush_work_sync(&priv->restart_net_feed_wq);
 	printk("dvb_net: removed network interface %s\n", net->name);
 	unregister_netdev(net);
 	dvbnet->state[num]=0;
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 2525d3b3c88..3d48ba01934 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
 config DVB_USB
 	tristate "Support for various USB DVB devices"
-	depends on DVB_CORE && USB && I2C && IR_CORE
+	depends on DVB_CORE && USB && I2C && RC_CORE
 	help
 	  By enabling this you will be able to choose the various supported
 	  USB1.1 and USB2.0 DVB devices.
diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c
index a5c36372713..53b93a4b6f8 100644
--- a/drivers/media/dvb/dvb-usb/a800.c
+++ b/drivers/media/dvb/dvb-usb/a800.c
@@ -37,7 +37,7 @@ static int a800_identify_state(struct usb_device *udev, struct dvb_usb_device_pr
 	return 0;
 }
 
-static struct ir_scancode ir_codes_a800_table[] = {
+static struct rc_map_table rc_map_a800_table[] = {
 	{ 0x0201, KEY_PROG1 },       /* SOURCE */
 	{ 0x0200, KEY_POWER },       /* POWER */
 	{ 0x0205, KEY_1 },           /* 1 */
@@ -148,8 +148,8 @@ static struct dvb_usb_device_properties a800_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_a800_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_a800_table),
+		.rc_map_table     = rc_map_a800_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_a800_table),
 		.rc_query         = a800_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/af9005-remote.c b/drivers/media/dvb/dvb-usb/af9005-remote.c
index 696207fe37e..c3bc64ed405 100644
--- a/drivers/media/dvb/dvb-usb/af9005-remote.c
+++ b/drivers/media/dvb/dvb-usb/af9005-remote.c
@@ -33,7 +33,7 @@ MODULE_PARM_DESC(debug,
 
 #define deb_decode(args...)   dprintk(dvb_usb_af9005_remote_debug,0x01,args)
 
-struct ir_scancode ir_codes_af9005_table[] = {
+struct rc_map_table rc_map_af9005_table[] = {
 
 	{0x01b7, KEY_POWER},
 	{0x01a7, KEY_VOLUMEUP},
@@ -74,7 +74,7 @@ struct ir_scancode ir_codes_af9005_table[] = {
 	{0x00d5, KEY_GOTO},	/* marked jump on the remote */
 };
 
-int ir_codes_af9005_table_size = ARRAY_SIZE(ir_codes_af9005_table);
+int rc_map_af9005_table_size = ARRAY_SIZE(rc_map_af9005_table);
 
 static int repeatable_keys[] = {
 	KEY_VOLUMEUP,
@@ -130,10 +130,10 @@ int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len, u32 * event,
 				deb_decode("code != inverted code\n");
 				return 0;
 			}
-			for (i = 0; i < ir_codes_af9005_table_size; i++) {
-				if (rc5_custom(&ir_codes_af9005_table[i]) == cust
-				    && rc5_data(&ir_codes_af9005_table[i]) == dat) {
-					*event = ir_codes_af9005_table[i].keycode;
+			for (i = 0; i < rc_map_af9005_table_size; i++) {
+				if (rc5_custom(&rc_map_af9005_table[i]) == cust
+				    && rc5_data(&rc_map_af9005_table[i]) == dat) {
+					*event = rc_map_af9005_table[i].keycode;
 					*state = REMOTE_KEY_PRESSED;
 					deb_decode
 					    ("key pressed, event %x\n", *event);
@@ -146,8 +146,8 @@ int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len, u32 * event,
 	return 0;
 }
 
-EXPORT_SYMBOL(ir_codes_af9005_table);
-EXPORT_SYMBOL(ir_codes_af9005_table_size);
+EXPORT_SYMBOL(rc_map_af9005_table);
+EXPORT_SYMBOL(rc_map_af9005_table_size);
 EXPORT_SYMBOL(af9005_rc_decode);
 
 MODULE_AUTHOR("Luca Olivetti <luca@ventoso.org>");
diff --git a/drivers/media/dvb/dvb-usb/af9005.c b/drivers/media/dvb/dvb-usb/af9005.c
index 8ecba8848bc..51f6439dcfd 100644
--- a/drivers/media/dvb/dvb-usb/af9005.c
+++ b/drivers/media/dvb/dvb-usb/af9005.c
@@ -1027,8 +1027,8 @@ static struct dvb_usb_device_properties af9005_properties = {
 
 	.rc.legacy = {
 		.rc_interval = 200,
-		.rc_key_map = NULL,
-		.rc_key_map_size = 0,
+		.rc_map_table = NULL,
+		.rc_map_size = 0,
 		.rc_query = af9005_rc_query,
 	},
 
@@ -1070,14 +1070,14 @@ static int __init af9005_usb_module_init(void)
 		return result;
 	}
 	rc_decode = symbol_request(af9005_rc_decode);
-	rc_keys = symbol_request(ir_codes_af9005_table);
-	rc_keys_size = symbol_request(ir_codes_af9005_table_size);
+	rc_keys = symbol_request(rc_map_af9005_table);
+	rc_keys_size = symbol_request(rc_map_af9005_table_size);
 	if (rc_decode == NULL || rc_keys == NULL || rc_keys_size == NULL) {
 		err("af9005_rc_decode function not found, disabling remote");
 		af9005_properties.rc.legacy.rc_query = NULL;
 	} else {
-		af9005_properties.rc.legacy.rc_key_map = rc_keys;
-		af9005_properties.rc.legacy.rc_key_map_size = *rc_keys_size;
+		af9005_properties.rc.legacy.rc_map_table = rc_keys;
+		af9005_properties.rc.legacy.rc_map_size = *rc_keys_size;
 	}
 
 	return 0;
@@ -1089,9 +1089,9 @@ static void __exit af9005_usb_module_exit(void)
 	if (rc_decode != NULL)
 		symbol_put(af9005_rc_decode);
 	if (rc_keys != NULL)
-		symbol_put(ir_codes_af9005_table);
+		symbol_put(rc_map_af9005_table);
 	if (rc_keys_size != NULL)
-		symbol_put(ir_codes_af9005_table_size);
+		symbol_put(rc_map_af9005_table_size);
 	/* deregister this driver from the USB subsystem */
 	usb_deregister(&af9005_usb_driver);
 }
diff --git a/drivers/media/dvb/dvb-usb/af9005.h b/drivers/media/dvb/dvb-usb/af9005.h
index 3c1fbd1c5d6..c71c77bd7f4 100644
--- a/drivers/media/dvb/dvb-usb/af9005.h
+++ b/drivers/media/dvb/dvb-usb/af9005.h
@@ -3490,7 +3490,7 @@ extern u8 regmask[8];
 /* remote control decoder */
 extern int af9005_rc_decode(struct dvb_usb_device *d, u8 * data, int len,
 			    u32 * event, int *state);
-extern struct ir_scancode ir_codes_af9005_table[];
-extern int ir_codes_af9005_table_size;
+extern struct rc_map_table rc_map_af9005_table[];
+extern int rc_map_af9005_table_size;
 
 #endif
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 31c0a0ed39f..8671ca362c8 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -1041,13 +1041,13 @@ static int af9015_rc_query(struct dvb_usb_device *d)
 				priv->rc_keycode = buf[12] << 16 |
 					buf[13] << 8 | buf[14];
 			}
-			ir_keydown(d->rc_input_dev, priv->rc_keycode, 0);
+			rc_keydown(d->rc_dev, priv->rc_keycode, 0);
 		} else {
 			priv->rc_keycode = 0; /* clear just for sure */
 		}
 	} else if (priv->rc_repeat != buf[6] || buf[0]) {
 		deb_rc("%s: key repeated\n", __func__);
-		ir_keydown(d->rc_input_dev, priv->rc_keycode, 0);
+		rc_keydown(d->rc_dev, priv->rc_keycode, 0);
 	} else {
 		deb_rc("%s: no key press\n", __func__);
 	}
@@ -1344,13 +1344,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 		.identify_state = af9015_identify_state,
 
 		.rc.core = {
-			.protocol         = IR_TYPE_NEC,
+			.protocol         = RC_TYPE_NEC,
 			.module_name      = "af9015",
 			.rc_query         = af9015_rc_query,
 			.rc_interval      = AF9015_RC_INTERVAL,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_NEC,
-			},
+			.allowed_protos   = RC_TYPE_NEC,
 		},
 
 		.i2c_algo = &af9015_i2c_algo,
@@ -1474,13 +1472,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 		.identify_state = af9015_identify_state,
 
 		.rc.core = {
-			.protocol         = IR_TYPE_NEC,
+			.protocol         = RC_TYPE_NEC,
 			.module_name      = "af9015",
 			.rc_query         = af9015_rc_query,
 			.rc_interval      = AF9015_RC_INTERVAL,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_NEC,
-			},
+			.allowed_protos   = RC_TYPE_NEC,
 		},
 
 		.i2c_algo = &af9015_i2c_algo,
@@ -1588,13 +1584,11 @@ static struct dvb_usb_device_properties af9015_properties[] = {
 		.identify_state = af9015_identify_state,
 
 		.rc.core = {
-			.protocol         = IR_TYPE_NEC,
+			.protocol         = RC_TYPE_NEC,
 			.module_name      = "af9015",
 			.rc_query         = af9015_rc_query,
 			.rc_interval      = AF9015_RC_INTERVAL,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_NEC,
-			},
+			.allowed_protos   = RC_TYPE_NEC,
 		},
 
 		.i2c_algo = &af9015_i2c_algo,
diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c
index 1759d26bca4..6b402e94353 100644
--- a/drivers/media/dvb/dvb-usb/anysee.c
+++ b/drivers/media/dvb/dvb-usb/anysee.c
@@ -394,7 +394,7 @@ static int anysee_rc_query(struct dvb_usb_device *d)
 
 	if (ircode[0]) {
 		deb_rc("%s: key pressed %02x\n", __func__, ircode[1]);
-		ir_keydown(d->rc_input_dev, 0x08 << 8 | ircode[1], 0);
+		rc_keydown(d->rc_dev, 0x08 << 8 | ircode[1], 0);
 	}
 
 	return 0;
@@ -476,7 +476,7 @@ static struct dvb_usb_device_properties anysee_properties = {
 
 	.rc.core = {
 		.rc_codes         = RC_MAP_ANYSEE,
-		.protocol         = IR_TYPE_OTHER,
+		.protocol         = RC_TYPE_OTHER,
 		.module_name      = "anysee",
 		.rc_query         = anysee_rc_query,
 		.rc_interval      = 250,  /* windows driver uses 500ms */
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
index 62c58288469..57e2444d51a 100644
--- a/drivers/media/dvb/dvb-usb/az6027.c
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -386,7 +386,7 @@ static int az6027_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 }
 
 /* keys for the enclosed remote control */
-static struct ir_scancode ir_codes_az6027_table[] = {
+static struct rc_map_table rc_map_az6027_table[] = {
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
 };
@@ -1089,6 +1089,7 @@ static struct usb_device_id az6027_usb_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,  USB_PID_TERRATEC_DVBS2CI_V2) },
 	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V1) },
 	{ USB_DEVICE(USB_VID_TECHNISAT, USB_PID_TECHNISAT_USB2_HDCI_V2) },
+	{ USB_DEVICE(USB_VID_ELGATO, USB_PID_ELGATO_EYETV_SAT) },
 	{ },
 };
 
@@ -1126,15 +1127,15 @@ static struct dvb_usb_device_properties az6027_properties = {
 	.read_mac_address = az6027_read_mac_addr,
  */
 	.rc.legacy = {
-		.rc_key_map       = ir_codes_az6027_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_az6027_table),
+		.rc_map_table     = rc_map_az6027_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_az6027_table),
 		.rc_interval      = 400,
 		.rc_query         = az6027_rc_query,
 	},
 
 	.i2c_algo         = &az6027_i2c_algo,
 
-	.num_device_descs = 5,
+	.num_device_descs = 6,
 	.devices = {
 		{
 			.name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)",
@@ -1156,6 +1157,10 @@ static struct dvb_usb_device_properties az6027_properties = {
 			.name = "Technisat SkyStar USB 2 HD CI",
 			.cold_ids = { &az6027_usb_table[4], NULL },
 			.warm_ids = { NULL },
+		}, {
+			.name = "Elgato EyeTV Sat",
+			.cold_ids = { &az6027_usb_table[5], NULL },
+			.warm_ids = { NULL },
 		},
 		{ NULL },
 	}
diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-core.c b/drivers/media/dvb/dvb-usb/cinergyT2-core.c
index 4f5aa83fc1f..16f2ce2bc15 100644
--- a/drivers/media/dvb/dvb-usb/cinergyT2-core.c
+++ b/drivers/media/dvb/dvb-usb/cinergyT2-core.c
@@ -84,7 +84,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static struct ir_scancode ir_codes_cinergyt2_table[] = {
+static struct rc_map_table rc_map_cinergyt2_table[] = {
 	{ 0x0401, KEY_POWER },
 	{ 0x0402, KEY_1 },
 	{ 0x0403, KEY_2 },
@@ -219,8 +219,8 @@ static struct dvb_usb_device_properties cinergyt2_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 50,
-		.rc_key_map       = ir_codes_cinergyt2_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_cinergyt2_table),
+		.rc_map_table     = rc_map_cinergyt2_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_cinergyt2_table),
 		.rc_query         = cinergyt2_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index cd9f362c37b..acb5fb2d2e7 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -385,7 +385,7 @@ static int cxusb_d680_dmb_streaming_ctrl(
 
 static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	u8 ircode[4];
 	int i;
 
@@ -394,7 +394,7 @@ static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == ircode[2] &&
 		    rc5_data(&keymap[i]) == ircode[3]) {
 			*event = keymap[i].keycode;
@@ -410,7 +410,7 @@ static int cxusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
 				    int *state)
 {
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	u8 ircode[4];
 	int i;
 	struct i2c_msg msg = { .addr = 0x6b, .flags = I2C_M_RD,
@@ -422,7 +422,7 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
 	if (cxusb_i2c_xfer(&d->i2c_adap, &msg, 1) != 1)
 		return 0;
 
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == ircode[1] &&
 		    rc5_data(&keymap[i]) == ircode[2]) {
 			*event = keymap[i].keycode;
@@ -438,7 +438,7 @@ static int cxusb_bluebird2_rc_query(struct dvb_usb_device *d, u32 *event,
 static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
 		int *state)
 {
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	u8 ircode[2];
 	int i;
 
@@ -448,7 +448,7 @@ static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
 	if (cxusb_ctrl_msg(d, 0x10, NULL, 0, ircode, 2) < 0)
 		return 0;
 
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
 		if (rc5_custom(&keymap[i]) == ircode[0] &&
 		    rc5_data(&keymap[i]) == ircode[1]) {
 			*event = keymap[i].keycode;
@@ -461,7 +461,7 @@ static int cxusb_d680_dmb_rc_query(struct dvb_usb_device *d, u32 *event,
 	return 0;
 }
 
-static struct ir_scancode ir_codes_dvico_mce_table[] = {
+static struct rc_map_table rc_map_dvico_mce_table[] = {
 	{ 0xfe02, KEY_TV },
 	{ 0xfe0e, KEY_MP3 },
 	{ 0xfe1a, KEY_DVD },
@@ -509,7 +509,7 @@ static struct ir_scancode ir_codes_dvico_mce_table[] = {
 	{ 0xfe4e, KEY_POWER },
 };
 
-static struct ir_scancode ir_codes_dvico_portable_table[] = {
+static struct rc_map_table rc_map_dvico_portable_table[] = {
 	{ 0xfc02, KEY_SETUP },       /* Profile */
 	{ 0xfc43, KEY_POWER2 },
 	{ 0xfc06, KEY_EPG },
@@ -548,7 +548,7 @@ static struct ir_scancode ir_codes_dvico_portable_table[] = {
 	{ 0xfc00, KEY_UNKNOWN },    /* HD */
 };
 
-static struct ir_scancode ir_codes_d680_dmb_table[] = {
+static struct rc_map_table rc_map_d680_dmb_table[] = {
 	{ 0x0038, KEY_UNKNOWN },	/* TV/AV */
 	{ 0x080c, KEY_ZOOM },
 	{ 0x0800, KEY_0 },
@@ -923,7 +923,7 @@ static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap)
 		return -EIO;
 
 	/* try to determine if there is no IR decoder on the I2C bus */
-	for (i = 0; adap->dev->props.rc.legacy.rc_key_map != NULL && i < 5; i++) {
+	for (i = 0; adap->dev->props.rc.legacy.rc_map_table != NULL && i < 5; i++) {
 		msleep(20);
 		if (cxusb_i2c_xfer(&adap->dev->i2c_adap, &msg, 1) != 1)
 			goto no_IR;
@@ -931,7 +931,7 @@ static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap)
 			continue;
 		if (ircode[2] + ircode[3] != 0xff) {
 no_IR:
-			adap->dev->props.rc.legacy.rc_key_map = NULL;
+			adap->dev->props.rc.legacy.rc_map_table = NULL;
 			info("No IR receiver detected on this device.");
 			break;
 		}
@@ -1453,8 +1453,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgh064f_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_portable_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_map_table     = rc_map_dvico_portable_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1506,8 +1506,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_dee1601_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 150,
-		.rc_key_map       = ir_codes_dvico_mce_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
+		.rc_map_table     = rc_map_dvico_mce_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_mce_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1567,8 +1567,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_lgz201_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_portable_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_map_table     = rc_map_dvico_portable_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1619,8 +1619,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_dtt7579_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_portable_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_map_table     = rc_map_dvico_portable_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1670,8 +1670,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_dualdig4_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_mce_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
+		.rc_map_table     = rc_map_dvico_mce_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_mce_table),
 		.rc_query         = cxusb_bluebird2_rc_query,
 	},
 
@@ -1720,8 +1720,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_portable_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_map_table     = rc_map_dvico_portable_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
 		.rc_query         = cxusb_bluebird2_rc_query,
 	},
 
@@ -1772,8 +1772,8 @@ static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_prope
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_portable_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_portable_table),
+		.rc_map_table     = rc_map_dvico_portable_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_portable_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1865,8 +1865,8 @@ struct dvb_usb_device_properties cxusb_bluebird_dualdig4_rev2_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_dvico_mce_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_dvico_mce_table),
+		.rc_map_table     = rc_map_dvico_mce_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_dvico_mce_table),
 		.rc_query         = cxusb_rc_query,
 	},
 
@@ -1915,8 +1915,8 @@ static struct dvb_usb_device_properties cxusb_d680_dmb_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_d680_dmb_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_d680_dmb_table),
+		.rc_map_table     = rc_map_d680_dmb_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_d680_dmb_table),
 		.rc_query         = cxusb_d680_dmb_rc_query,
 	},
 
@@ -1966,8 +1966,8 @@ static struct dvb_usb_device_properties cxusb_mygica_d689_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_d680_dmb_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_d680_dmb_table),
+		.rc_map_table     = rc_map_d680_dmb_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_d680_dmb_table),
 		.rc_query         = cxusb_d680_dmb_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/dib0700.h b/drivers/media/dvb/dvb-usb/dib0700.h
index c2c9d236ec7..3537d65c04b 100644
--- a/drivers/media/dvb/dvb-usb/dib0700.h
+++ b/drivers/media/dvb/dvb-usb/dib0700.h
@@ -60,7 +60,7 @@ extern int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
 extern struct i2c_algorithm dib0700_i2c_algo;
 extern int dib0700_identify_state(struct usb_device *udev, struct dvb_usb_device_properties *props,
 			struct dvb_usb_device_description **desc, int *cold);
-extern int dib0700_change_protocol(void *priv, u64 ir_type);
+extern int dib0700_change_protocol(struct rc_dev *dev, u64 rc_type);
 
 extern int dib0700_device_count;
 extern int dvb_usb_dib0700_ir_proto;
diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 48397f103d3..8ca48f76dfa 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -471,19 +471,19 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	return dib0700_ctrl_wr(adap->dev, b, 4);
 }
 
-int dib0700_change_protocol(void *priv, u64 ir_type)
+int dib0700_change_protocol(struct rc_dev *rc, u64 rc_type)
 {
-	struct dvb_usb_device *d = priv;
+	struct dvb_usb_device *d = rc->priv;
 	struct dib0700_state *st = d->priv;
 	u8 rc_setup[3] = { REQUEST_SET_RC, 0, 0 };
 	int new_proto, ret;
 
 	/* Set the IR mode */
-	if (ir_type == IR_TYPE_RC5)
+	if (rc_type == RC_TYPE_RC5)
 		new_proto = 1;
-	else if (ir_type == IR_TYPE_NEC)
+	else if (rc_type == RC_TYPE_NEC)
 		new_proto = 0;
-	else if (ir_type == IR_TYPE_RC6) {
+	else if (rc_type == RC_TYPE_RC6) {
 		if (st->fw_version < 0x10200)
 			return -EINVAL;
 
@@ -499,7 +499,7 @@ int dib0700_change_protocol(void *priv, u64 ir_type)
 		return ret;
 	}
 
-	d->props.rc.core.protocol = ir_type;
+	d->props.rc.core.protocol = rc_type;
 
 	return ret;
 }
@@ -535,7 +535,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 	if (d == NULL)
 		return;
 
-	if (d->rc_input_dev == NULL) {
+	if (d->rc_dev == NULL) {
 		/* This will occur if disable_rc_polling=1 */
 		usb_free_urb(purb);
 		return;
@@ -562,7 +562,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		 purb->actual_length);
 
 	switch (d->props.rc.core.protocol) {
-	case IR_TYPE_NEC:
+	case RC_TYPE_NEC:
 		toggle = 0;
 
 		/* NEC protocol sends repeat code as 0 0 0 FF */
@@ -600,7 +600,7 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		goto resubmit;
 	}
 
-	ir_keydown(d->rc_input_dev, keycode, toggle);
+	rc_keydown(d->rc_dev, keycode, toggle);
 
 resubmit:
 	/* Clean the buffer before we requeue */
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index e06acd1fecb..defd83964ce 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -510,7 +510,7 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 
 	d->last_event = 0;
 	switch (d->props.rc.core.protocol) {
-	case IR_TYPE_NEC:
+	case RC_TYPE_NEC:
 		/* NEC protocol sends repeat code as 0 0 0 FF */
 		if ((key[3-2] == 0x00) && (key[3-3] == 0x00) &&
 		    (key[3] == 0xff))
@@ -520,13 +520,13 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d)
 			d->last_event = keycode;
 		}
 
-		ir_keydown(d->rc_input_dev, keycode, 0);
+		rc_keydown(d->rc_dev, keycode, 0);
 		break;
 	default:
 		/* RC-5 protocol changes toggle bit on new keypress */
 		keycode = key[3-2] << 8 | key[3-3];
 		toggle = key[3-1];
-		ir_keydown(d->rc_input_dev, keycode, toggle);
+		rc_keydown(d->rc_dev, keycode, toggle);
 
 		break;
 	}
@@ -1924,12 +1924,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -1960,12 +1958,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2021,12 +2017,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_interval      = DEFAULT_RC_INTERVAL,
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2065,12 +2059,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2143,12 +2135,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2189,12 +2179,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2259,12 +2247,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2308,12 +2294,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 
@@ -2379,12 +2363,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
@@ -2417,12 +2399,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
@@ -2487,12 +2467,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
@@ -2533,12 +2511,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_NEC_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 2,
@@ -2584,12 +2560,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
 		.num_adapters = 1,
@@ -2623,12 +2597,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			.rc_codes         = RC_MAP_DIB0700_RC5_TABLE,
 			.module_name	  = "dib0700",
 			.rc_query         = dib0700_rc_query_old_firmware,
-			.rc_props = {
-				.allowed_protos = IR_TYPE_RC5 |
-						  IR_TYPE_RC6 |
-						  IR_TYPE_NEC,
-				.change_protocol = dib0700_change_protocol,
-			},
+			.allowed_protos   = RC_TYPE_RC5 |
+					    RC_TYPE_RC6 |
+					    RC_TYPE_NEC,
+			.change_protocol  = dib0700_change_protocol,
 		},
 	},
 };
diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c
index ba991aa21af..956f7ae2e51 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-common.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-common.c
@@ -327,7 +327,7 @@ EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach);
 /*
  * common remote control stuff
  */
-struct ir_scancode ir_codes_dibusb_table[] = {
+struct rc_map_table rc_map_dibusb_table[] = {
 	/* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */
 	{ 0x0016, KEY_POWER },
 	{ 0x0010, KEY_MUTE },
@@ -456,7 +456,7 @@ struct ir_scancode ir_codes_dibusb_table[] = {
 	{ 0x804e, KEY_ENTER },
 	{ 0x804f, KEY_VOLUMEDOWN },
 };
-EXPORT_SYMBOL(ir_codes_dibusb_table);
+EXPORT_SYMBOL(rc_map_dibusb_table);
 
 int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c
index 8e3c0d2cce1..04d91bdd356 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mb.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c
@@ -213,8 +213,8 @@ static struct dvb_usb_device_properties dibusb1_1_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dibusb_table,
-		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_map_table     = rc_map_dibusb_table,
+		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 		.rc_query         = dibusb_rc_query,
 	},
 
@@ -299,8 +299,8 @@ static struct dvb_usb_device_properties dibusb1_1_an2235_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dibusb_table,
-		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_map_table     = rc_map_dibusb_table,
+		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 		.rc_query         = dibusb_rc_query,
 	},
 
@@ -365,8 +365,8 @@ static struct dvb_usb_device_properties dibusb2_0b_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dibusb_table,
-		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_map_table     = rc_map_dibusb_table,
+		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 		.rc_query         = dibusb_rc_query,
 	},
 
@@ -424,8 +424,8 @@ static struct dvb_usb_device_properties artec_t1_usb2_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dibusb_table,
-		.rc_key_map_size  = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
+		.rc_map_table     = rc_map_dibusb_table,
+		.rc_map_size      = 111, /* wow, that is ugly ... I want to load it to the driver dynamically */
 		.rc_query         = dibusb_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c
index 1cbc41cb4e8..c1d9094b61e 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mc.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c
@@ -83,8 +83,8 @@ static struct dvb_usb_device_properties dibusb_mc_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = DEFAULT_RC_INTERVAL,
-		.rc_key_map       = ir_codes_dibusb_table,
-		.rc_key_map_size  = 111, /* FIXME */
+		.rc_map_table     = rc_map_dibusb_table,
+		.rc_map_size      = 111, /* FIXME */
 		.rc_query         = dibusb_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/dibusb.h b/drivers/media/dvb/dvb-usb/dibusb.h
index 61a6bf38947..e47c321b3ff 100644
--- a/drivers/media/dvb/dvb-usb/dibusb.h
+++ b/drivers/media/dvb/dvb-usb/dibusb.h
@@ -124,7 +124,7 @@ extern int dibusb2_0_power_ctrl(struct dvb_usb_device *, int);
 #define DEFAULT_RC_INTERVAL 150
 //#define DEFAULT_RC_INTERVAL 100000
 
-extern struct ir_scancode ir_codes_dibusb_table[];
+extern struct rc_map_table rc_map_dibusb_table[];
 extern int dibusb_rc_query(struct dvb_usb_device *, u32 *, int *);
 extern int dibusb_read_eeprom_byte(struct dvb_usb_device *, u8, u8 *);
 
diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c
index 13d006bb19d..f2dbce7edb3 100644
--- a/drivers/media/dvb/dvb-usb/digitv.c
+++ b/drivers/media/dvb/dvb-usb/digitv.c
@@ -161,7 +161,7 @@ static int digitv_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static struct ir_scancode ir_codes_digitv_table[] = {
+static struct rc_map_table rc_map_digitv_table[] = {
 	{ 0x5f55, KEY_0 },
 	{ 0x6f55, KEY_1 },
 	{ 0x9f55, KEY_2 },
@@ -237,10 +237,10 @@ static int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	/* if something is inside the buffer, simulate key press */
 	if (key[1] != 0)
 	{
-		  for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
-			if (rc5_custom(&d->props.rc.legacy.rc_key_map[i]) == key[1] &&
-			    rc5_data(&d->props.rc.legacy.rc_key_map[i]) == key[2]) {
-				*event = d->props.rc.legacy.rc_key_map[i].keycode;
+		  for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
+			if (rc5_custom(&d->props.rc.legacy.rc_map_table[i]) == key[1] &&
+			    rc5_data(&d->props.rc.legacy.rc_map_table[i]) == key[2]) {
+				*event = d->props.rc.legacy.rc_map_table[i].keycode;
 				*state = REMOTE_KEY_PRESSED;
 				return 0;
 			}
@@ -312,8 +312,8 @@ static struct dvb_usb_device_properties digitv_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 1000,
-		.rc_key_map       = ir_codes_digitv_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_digitv_table),
+		.rc_map_table     = rc_map_digitv_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_digitv_table),
 		.rc_query         = digitv_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c
index ca495e07f35..ecd86eca254 100644
--- a/drivers/media/dvb/dvb-usb/dtt200u.c
+++ b/drivers/media/dvb/dvb-usb/dtt200u.c
@@ -57,7 +57,7 @@ static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
 
 /* remote control */
 /* key list for the tiny remote control (Yakumo, don't know about the others) */
-static struct ir_scancode ir_codes_dtt200u_table[] = {
+static struct rc_map_table rc_map_dtt200u_table[] = {
 	{ 0x8001, KEY_MUTE },
 	{ 0x8002, KEY_CHANNELDOWN },
 	{ 0x8003, KEY_VOLUMEDOWN },
@@ -163,8 +163,8 @@ static struct dvb_usb_device_properties dtt200u_properties = {
 
 	.rc.legacy = {
 		.rc_interval     = 300,
-		.rc_key_map      = ir_codes_dtt200u_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_map_table    = rc_map_dtt200u_table,
+		.rc_map_size     = ARRAY_SIZE(rc_map_dtt200u_table),
 		.rc_query        = dtt200u_rc_query,
 	},
 
@@ -210,8 +210,8 @@ static struct dvb_usb_device_properties wt220u_properties = {
 
 	.rc.legacy = {
 		.rc_interval     = 300,
-		.rc_key_map      = ir_codes_dtt200u_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_map_table      = rc_map_dtt200u_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_dtt200u_table),
 		.rc_query        = dtt200u_rc_query,
 	},
 
@@ -257,8 +257,8 @@ static struct dvb_usb_device_properties wt220u_fc_properties = {
 
 	.rc.legacy = {
 		.rc_interval     = 300,
-		.rc_key_map      = ir_codes_dtt200u_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_map_table    = rc_map_dtt200u_table,
+		.rc_map_size     = ARRAY_SIZE(rc_map_dtt200u_table),
 		.rc_query        = dtt200u_rc_query,
 	},
 
@@ -304,8 +304,8 @@ static struct dvb_usb_device_properties wt220u_zl0353_properties = {
 
 	.rc.legacy = {
 		.rc_interval     = 300,
-		.rc_key_map      = ir_codes_dtt200u_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dtt200u_table),
+		.rc_map_table    = rc_map_dtt200u_table,
+		.rc_map_size     = ARRAY_SIZE(rc_map_dtt200u_table),
 		.rc_query        = dtt200u_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 192a40ce583..1a6310b6192 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -301,6 +301,7 @@
 #define USB_PID_ELGATO_EYETV_DIVERSITY			0x0011
 #define USB_PID_ELGATO_EYETV_DTT			0x0021
 #define USB_PID_ELGATO_EYETV_DTT_Dlx			0x0020
+#define USB_PID_ELGATO_EYETV_SAT			0x002a
 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD		0x5000
 #define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM		0x5001
 #define USB_PID_FRIIO_WHITE				0x0001
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
index b579fed3ab3..23005b3cf30 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c
@@ -13,11 +13,11 @@ static int legacy_dvb_usb_getkeycode(struct input_dev *dev,
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	int i;
 
 	/* See if we can match the raw key code. */
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 		if (keymap[i].scancode == scancode) {
 			*keycode = keymap[i].keycode;
 			return 0;
@@ -28,7 +28,7 @@ static int legacy_dvb_usb_getkeycode(struct input_dev *dev,
 	 * otherwise, input core won't let legacy_dvb_usb_setkeycode
 	 * to work
 	 */
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 		if (keymap[i].keycode == KEY_RESERVED ||
 		    keymap[i].keycode == KEY_UNKNOWN) {
 			*keycode = KEY_RESERVED;
@@ -43,18 +43,18 @@ static int legacy_dvb_usb_setkeycode(struct input_dev *dev,
 {
 	struct dvb_usb_device *d = input_get_drvdata(dev);
 
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	int i;
 
 	/* Search if it is replacing an existing keycode */
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 		if (keymap[i].scancode == scancode) {
 			keymap[i].keycode = keycode;
 			return 0;
 		}
 
 	/* Search if is there a clean entry. If so, use it */
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 		if (keymap[i].keycode == KEY_RESERVED ||
 		    keymap[i].keycode == KEY_UNKNOWN) {
 			keymap[i].scancode = scancode;
@@ -106,10 +106,10 @@ static void legacy_dvb_usb_read_remote_control(struct work_struct *work)
 			d->last_event = event;
 		case REMOTE_KEY_REPEAT:
 			deb_rc("key repeated\n");
-			input_event(d->rc_input_dev, EV_KEY, event, 1);
-			input_sync(d->rc_input_dev);
-			input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
-			input_sync(d->rc_input_dev);
+			input_event(d->input_dev, EV_KEY, event, 1);
+			input_sync(d->input_dev);
+			input_event(d->input_dev, EV_KEY, d->last_event, 0);
+			input_sync(d->input_dev);
 			break;
 		default:
 			break;
@@ -154,20 +154,32 @@ schedule:
 	schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc.legacy.rc_interval));
 }
 
-static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d,
-				      struct input_dev *input_dev)
+static int legacy_dvb_usb_remote_init(struct dvb_usb_device *d)
 {
 	int i, err, rc_interval;
+	struct input_dev *input_dev;
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		return -ENOMEM;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	input_dev->name = "IR-receiver inside an USB DVB receiver";
+	input_dev->phys = d->rc_phys;
+	usb_to_input_id(d->udev, &input_dev->id);
+	input_dev->dev.parent = &d->udev->dev;
+	d->input_dev = input_dev;
+	d->rc_dev = NULL;
 
 	input_dev->getkeycode = legacy_dvb_usb_getkeycode;
 	input_dev->setkeycode = legacy_dvb_usb_setkeycode;
 
 	/* set the bits for the keys */
-	deb_rc("key map size: %d\n", d->props.rc.legacy.rc_key_map_size);
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++) {
+	deb_rc("key map size: %d\n", d->props.rc.legacy.rc_map_size);
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++) {
 		deb_rc("setting bit for event %d item %d\n",
-			d->props.rc.legacy.rc_key_map[i].keycode, i);
-		set_bit(d->props.rc.legacy.rc_key_map[i].keycode, input_dev->keybit);
+			d->props.rc.legacy.rc_map_table[i].keycode, i);
+		set_bit(d->props.rc.legacy.rc_map_table[i].keycode, input_dev->keybit);
 	}
 
 	/* setting these two values to non-zero, we have to manage key repeats */
@@ -221,18 +233,34 @@ static void dvb_usb_read_remote_control(struct work_struct *work)
 			      msecs_to_jiffies(d->props.rc.core.rc_interval));
 }
 
-static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d,
-				       struct input_dev *input_dev)
+static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
 {
 	int err, rc_interval;
+	struct rc_dev *dev;
+
+	dev = rc_allocate_device();
+	if (!dev)
+		return -ENOMEM;
 
-	d->props.rc.core.rc_props.priv = d;
-	err = ir_input_register(input_dev,
-				 d->props.rc.core.rc_codes,
-				 &d->props.rc.core.rc_props,
-				 d->props.rc.core.module_name);
-	if (err < 0)
+	dev->driver_name = d->props.rc.core.module_name;
+	dev->map_name = d->props.rc.core.rc_codes;
+	dev->change_protocol = d->props.rc.core.change_protocol;
+	dev->allowed_protos = d->props.rc.core.allowed_protos;
+	dev->driver_type = RC_DRIVER_SCANCODE;
+	usb_to_input_id(d->udev, &dev->input_id);
+	dev->input_name = "IR-receiver inside an USB DVB receiver";
+	dev->input_phys = d->rc_phys;
+	dev->dev.parent = &d->udev->dev;
+	dev->priv = d;
+
+	err = rc_register_device(dev);
+	if (err < 0) {
+		rc_free_device(dev);
 		return err;
+	}
+
+	d->input_dev = NULL;
+	d->rc_dev = dev;
 
 	if (!d->props.rc.core.rc_query || d->props.rc.core.bulk_mode)
 		return 0;
@@ -251,13 +279,12 @@ static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d,
 
 int dvb_usb_remote_init(struct dvb_usb_device *d)
 {
-	struct input_dev *input_dev;
 	int err;
 
 	if (dvb_usb_disable_rc_polling)
 		return 0;
 
-	if (d->props.rc.legacy.rc_key_map && d->props.rc.legacy.rc_query)
+	if (d->props.rc.legacy.rc_map_table && d->props.rc.legacy.rc_query)
 		d->props.rc.mode = DVB_RC_LEGACY;
 	else if (d->props.rc.core.rc_codes)
 		d->props.rc.mode = DVB_RC_CORE;
@@ -267,26 +294,14 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
 	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
 	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
 
-	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->name = "IR-receiver inside an USB DVB receiver";
-	input_dev->phys = d->rc_phys;
-	usb_to_input_id(d->udev, &input_dev->id);
-	input_dev->dev.parent = &d->udev->dev;
-
 	/* Start the remote-control polling. */
 	if (d->props.rc.legacy.rc_interval < 40)
 		d->props.rc.legacy.rc_interval = 100; /* default */
 
-	d->rc_input_dev = input_dev;
-
 	if (d->props.rc.mode == DVB_RC_LEGACY)
-		err = legacy_dvb_usb_remote_init(d, input_dev);
+		err = legacy_dvb_usb_remote_init(d);
 	else
-		err = rc_core_dvb_usb_remote_init(d, input_dev);
+		err = rc_core_dvb_usb_remote_init(d);
 	if (err)
 		return err;
 
@@ -298,12 +313,11 @@ int dvb_usb_remote_init(struct dvb_usb_device *d)
 int dvb_usb_remote_exit(struct dvb_usb_device *d)
 {
 	if (d->state & DVB_USB_STATE_REMOTE) {
-		cancel_rearming_delayed_work(&d->rc_query_work);
-		flush_scheduled_work();
+		cancel_delayed_work_sync(&d->rc_query_work);
 		if (d->props.rc.mode == DVB_RC_LEGACY)
-			input_unregister_device(d->rc_input_dev);
+			input_unregister_device(d->input_dev);
 		else
-			ir_input_unregister(d->rc_input_dev);
+			rc_unregister_device(d->rc_dev);
 	}
 	d->state &= ~DVB_USB_STATE_REMOTE;
 	return 0;
@@ -316,7 +330,7 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d,
 		u8 keybuf[5], u32 *event, int *state)
 {
 	int i;
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
 	*event = 0;
 	*state = REMOTE_NO_KEY_PRESSED;
 	switch (keybuf[0]) {
@@ -329,7 +343,7 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d,
 				break;
 			}
 			/* See if we can match the raw key code. */
-			for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
+			for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
 				if (rc5_custom(&keymap[i]) == keybuf[1] &&
 					rc5_data(&keymap[i]) == keybuf[3]) {
 					*event = keymap[i].keycode;
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h
index 34f7b3ba8cc..65fa9268e7f 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb.h
@@ -14,7 +14,7 @@
 #include <linux/usb.h>
 #include <linux/firmware.h>
 #include <linux/mutex.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "dvb_frontend.h"
 #include "dvb_demux.h"
@@ -75,17 +75,17 @@ struct dvb_usb_device_description {
 	struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM];
 };
 
-static inline u8 rc5_custom(struct ir_scancode *key)
+static inline u8 rc5_custom(struct rc_map_table *key)
 {
 	return (key->scancode >> 8) & 0xff;
 }
 
-static inline u8 rc5_data(struct ir_scancode *key)
+static inline u8 rc5_data(struct rc_map_table *key)
 {
 	return key->scancode & 0xff;
 }
 
-static inline u8 rc5_scan(struct ir_scancode *key)
+static inline u8 rc5_scan(struct rc_map_table *key)
 {
 	return key->scancode & 0xffff;
 }
@@ -159,9 +159,9 @@ struct dvb_usb_adapter_properties {
 
 /**
  * struct dvb_rc_legacy - old properties of remote controller
- * @rc_key_map: a hard-wired array of struct ir_scancode (NULL to disable
+ * @rc_map_table: a hard-wired array of struct rc_map_table (NULL to disable
  *  remote control handling).
- * @rc_key_map_size: number of items in @rc_key_map.
+ * @rc_map_size: number of items in @rc_map_table.
  * @rc_query: called to query an event event.
  * @rc_interval: time in ms between two queries.
  */
@@ -170,8 +170,8 @@ struct dvb_rc_legacy {
 #define REMOTE_NO_KEY_PRESSED      0x00
 #define REMOTE_KEY_PRESSED         0x01
 #define REMOTE_KEY_REPEAT          0x02
-	struct ir_scancode  *rc_key_map;
-	int rc_key_map_size;
+	struct rc_map_table  *rc_map_table;
+	int rc_map_size;
 	int (*rc_query) (struct dvb_usb_device *, u32 *, int *);
 	int rc_interval;
 };
@@ -180,18 +180,20 @@ struct dvb_rc_legacy {
  * struct dvb_rc properties of remote controller, using rc-core
  * @rc_codes: name of rc codes table
  * @protocol: type of protocol(s) currently used by the driver
+ * @allowed_protos: protocol(s) supported by the driver
+ * @change_protocol: callback to change protocol
  * @rc_query: called to query an event event.
  * @rc_interval: time in ms between two queries.
- * @rc_props: remote controller properties
  * @bulk_mode: device supports bulk mode for RC (disable polling mode)
  */
 struct dvb_rc {
 	char *rc_codes;
 	u64 protocol;
+	u64 allowed_protos;
+	int (*change_protocol)(struct rc_dev *dev, u64 rc_type);
 	char *module_name;
 	int (*rc_query) (struct dvb_usb_device *d);
 	int rc_interval;
-	struct ir_dev_props rc_props;
 	bool bulk_mode;				/* uses bulk mode */
 };
 
@@ -385,7 +387,8 @@ struct dvb_usb_adapter {
  *
  * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB
  *
- * @rc_input_dev: input device for the remote control.
+ * @rc_dev: rc device for the remote control (rc-core mode)
+ * @input_dev: input device for the remote control (legacy mode)
  * @rc_query_work: struct work_struct frequent rc queries
  * @last_event: last triggered event
  * @last_state: last state (no, pressed, repeat)
@@ -418,7 +421,8 @@ struct dvb_usb_device {
 	struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE];
 
 	/* remote control */
-	struct input_dev *rc_input_dev;
+	struct rc_dev *rc_dev;
+	struct input_dev *input_dev;
 	char rc_phys[64];
 	struct delayed_work rc_query_work;
 	u32 last_event;
diff --git a/drivers/media/dvb/dvb-usb/dw2102.c b/drivers/media/dvb/dvb-usb/dw2102.c
index 774df88dc6e..2c307ba0d28 100644
--- a/drivers/media/dvb/dvb-usb/dw2102.c
+++ b/drivers/media/dvb/dvb-usb/dw2102.c
@@ -73,8 +73,8 @@
 		"Please see linux/Documentation/dvb/ for more details " \
 		"on firmware-problems."
 
-struct ir_codes_dvb_usb_table_table {
-	struct ir_scancode *rc_keys;
+struct rc_map_dvb_usb_table_table {
+	struct rc_map_table *rc_keys;
 	int rc_keys_size;
 };
 
@@ -948,7 +948,7 @@ static int dw3101_tuner_attach(struct dvb_usb_adapter *adap)
 	return 0;
 }
 
-static struct ir_scancode ir_codes_dw210x_table[] = {
+static struct rc_map_table rc_map_dw210x_table[] = {
 	{ 0xf80a, KEY_Q },		/*power*/
 	{ 0xf80c, KEY_M },		/*mute*/
 	{ 0xf811, KEY_1 },
@@ -982,7 +982,7 @@ static struct ir_scancode ir_codes_dw210x_table[] = {
 	{ 0xf81b, KEY_B },		/*recall*/
 };
 
-static struct ir_scancode ir_codes_tevii_table[] = {
+static struct rc_map_table rc_map_tevii_table[] = {
 	{ 0xf80a, KEY_POWER },
 	{ 0xf80c, KEY_MUTE },
 	{ 0xf811, KEY_1 },
@@ -1032,7 +1032,7 @@ static struct ir_scancode ir_codes_tevii_table[] = {
 	{ 0xf858, KEY_SWITCHVIDEOMODE },
 };
 
-static struct ir_scancode ir_codes_tbs_table[] = {
+static struct rc_map_table rc_map_tbs_table[] = {
 	{ 0xf884, KEY_POWER },
 	{ 0xf894, KEY_MUTE },
 	{ 0xf887, KEY_1 },
@@ -1067,16 +1067,16 @@ static struct ir_scancode ir_codes_tbs_table[] = {
 	{ 0xf89b, KEY_MODE }
 };
 
-static struct ir_codes_dvb_usb_table_table keys_tables[] = {
-	{ ir_codes_dw210x_table, ARRAY_SIZE(ir_codes_dw210x_table) },
-	{ ir_codes_tevii_table, ARRAY_SIZE(ir_codes_tevii_table) },
-	{ ir_codes_tbs_table, ARRAY_SIZE(ir_codes_tbs_table) },
+static struct rc_map_dvb_usb_table_table keys_tables[] = {
+	{ rc_map_dw210x_table, ARRAY_SIZE(rc_map_dw210x_table) },
+	{ rc_map_tevii_table, ARRAY_SIZE(rc_map_tevii_table) },
+	{ rc_map_tbs_table, ARRAY_SIZE(rc_map_tbs_table) },
 };
 
 static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 {
-	struct ir_scancode *keymap = d->props.rc.legacy.rc_key_map;
-	int keymap_size = d->props.rc.legacy.rc_key_map_size;
+	struct rc_map_table *keymap = d->props.rc.legacy.rc_map_table;
+	int keymap_size = d->props.rc.legacy.rc_map_size;
 	u8 key[2];
 	struct i2c_msg msg = {
 		.addr = DW2102_RC_QUERY,
@@ -1185,14 +1185,14 @@ static int dw2102_load_firmware(struct usb_device *dev,
 		/* init registers */
 		switch (dev->descriptor.idProduct) {
 		case USB_PID_PROF_1100:
-			s6x0_properties.rc.legacy.rc_key_map = ir_codes_tbs_table;
-			s6x0_properties.rc.legacy.rc_key_map_size =
-					ARRAY_SIZE(ir_codes_tbs_table);
+			s6x0_properties.rc.legacy.rc_map_table = rc_map_tbs_table;
+			s6x0_properties.rc.legacy.rc_map_size =
+					ARRAY_SIZE(rc_map_tbs_table);
 			break;
 		case USB_PID_TEVII_S650:
-			dw2104_properties.rc.legacy.rc_key_map = ir_codes_tevii_table;
-			dw2104_properties.rc.legacy.rc_key_map_size =
-					ARRAY_SIZE(ir_codes_tevii_table);
+			dw2104_properties.rc.legacy.rc_map_table = rc_map_tevii_table;
+			dw2104_properties.rc.legacy.rc_map_size =
+					ARRAY_SIZE(rc_map_tevii_table);
 		case USB_PID_DW2104:
 			reset = 1;
 			dw210x_op_rw(dev, 0xc4, 0x0000, 0, &reset, 1,
@@ -1257,8 +1257,8 @@ static struct dvb_usb_device_properties dw2102_properties = {
 	.i2c_algo = &dw2102_serit_i2c_algo,
 
 	.rc.legacy = {
-		.rc_key_map = ir_codes_dw210x_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
+		.rc_map_table = rc_map_dw210x_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_dw210x_table),
 		.rc_interval = 150,
 		.rc_query = dw2102_rc_query,
 	},
@@ -1310,8 +1310,8 @@ static struct dvb_usb_device_properties dw2104_properties = {
 
 	.i2c_algo = &dw2104_i2c_algo,
 	.rc.legacy = {
-		.rc_key_map = ir_codes_dw210x_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
+		.rc_map_table = rc_map_dw210x_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_dw210x_table),
 		.rc_interval = 150,
 		.rc_query = dw2102_rc_query,
 	},
@@ -1359,8 +1359,8 @@ static struct dvb_usb_device_properties dw3101_properties = {
 
 	.i2c_algo = &dw3101_i2c_algo,
 	.rc.legacy = {
-		.rc_key_map = ir_codes_dw210x_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_dw210x_table),
+		.rc_map_table = rc_map_dw210x_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_dw210x_table),
 		.rc_interval = 150,
 		.rc_query = dw2102_rc_query,
 	},
@@ -1404,8 +1404,8 @@ static struct dvb_usb_device_properties s6x0_properties = {
 
 	.i2c_algo = &s6x0_i2c_algo,
 	.rc.legacy = {
-		.rc_key_map = ir_codes_tevii_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_tevii_table),
+		.rc_map_table = rc_map_tevii_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_tevii_table),
 		.rc_interval = 150,
 		.rc_query = dw2102_rc_query,
 	},
@@ -1468,8 +1468,8 @@ static int dw2102_probe(struct usb_interface *intf,
 	/* fill only different fields */
 	p7500->firmware = "dvb-usb-p7500.fw";
 	p7500->devices[0] = d7500;
-	p7500->rc.legacy.rc_key_map = ir_codes_tbs_table;
-	p7500->rc.legacy.rc_key_map_size = ARRAY_SIZE(ir_codes_tbs_table);
+	p7500->rc.legacy.rc_map_table = rc_map_tbs_table;
+	p7500->rc.legacy.rc_map_size = ARRAY_SIZE(rc_map_tbs_table);
 	p7500->adapter->frontend_attach = prof_7500_frontend_attach;
 
 	if (0 == dvb_usb_device_init(intf, &dw2102_properties,
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
index c821293dbc2..1cb3d9a66e0 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -24,6 +24,33 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DV
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
+static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers)
+{
+	return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6));
+}
+
+static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers)
+{
+	return (gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1));
+}
+
+static void gp8psk_info(struct dvb_usb_device *d)
+{
+	u8 fpga_vers, fw_vers[6];
+
+	if (!gp8psk_get_fw_version(d, fw_vers))
+		info("FW Version = %i.%02i.%i (0x%x)  Build %4i/%02i/%02i",
+		fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers),
+		2000 + fw_vers[5], fw_vers[4], fw_vers[3]);
+	else
+		info("failed to get FW version");
+
+	if (!gp8psk_get_fpga_version(d, &fpga_vers))
+		info("FPGA Version = %i", fpga_vers);
+	else
+		info("failed to get FPGA version");
+}
+
 int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
 {
 	int ret = 0,try = 0;
@@ -146,6 +173,7 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
 				gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);
 			if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
 				return -EINVAL;
+			gp8psk_info(d);
 		}
 
 		if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.h b/drivers/media/dvb/dvb-usb/gp8psk.h
index e83a57506cf..831749a518c 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.h
+++ b/drivers/media/dvb/dvb-usb/gp8psk.h
@@ -25,7 +25,6 @@ extern int dvb_usb_gp8psk_debug;
 #define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args)
 #define deb_rc(args...)   dprintk(dvb_usb_gp8psk_debug,0x04,args)
 #define deb_fe(args...)   dprintk(dvb_usb_gp8psk_debug,0x08,args)
-/* gp8psk commands */
 
 /* Twinhan Vendor requests */
 #define TH_COMMAND_IN                     0xC0
@@ -49,8 +48,10 @@ extern int dvb_usb_gp8psk_debug;
 #define SET_DVB_MODE                    0x8E
 #define SET_DN_SWITCH                   0x8F
 #define GET_SIGNAL_LOCK                 0x90    /* in */
+#define GET_FW_VERS			0x92
 #define GET_SERIAL_NUMBER               0x93    /* in */
 #define USE_EXTRA_VOLT                  0x94
+#define GET_FPGA_VERS			0x95
 #define CW3K_INIT			0x9d
 
 /* PSK_configuration bits */
@@ -88,6 +89,11 @@ extern int dvb_usb_gp8psk_debug;
 #define PRODUCT_STRING_READ               0x0D
 #define FW_BCD_VERSION_READ               0x14
 
+/* firmware revision id's */
+#define GP8PSK_FW_REV1			0x020604
+#define GP8PSK_FW_REV2			0x020704
+#define GP8PSK_FW_VERS(_fw_vers)	((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0])
+
 extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d);
 extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen);
 extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index d939fbbf9fe..9eea4188303 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -61,7 +61,7 @@
 #define DVB_USB_LOG_PREFIX "LME2510(C)"
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "dvb-usb.h"
 #include "lmedm04.h"
@@ -112,7 +112,6 @@ struct lme2510_state {
 	u8 i2c_tuner_gate_r;
 	u8 i2c_tuner_addr;
 	u8 stream_on;
-	u8 one_tune;
 	void *buffer;
 	struct urb *lme_urb;
 	void *usb_buffer;
@@ -125,7 +124,7 @@ static int lme2510_bulk_write(struct usb_device *dev,
 	int ret, actual_l;
 
 	ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
-				snd, len , &actual_l, 500);
+				snd, len , &actual_l, 100);
 	return ret;
 }
 
@@ -135,7 +134,7 @@ static int lme2510_bulk_read(struct usb_device *dev,
 	int ret, actual_l;
 
 	ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
-				 rev, len , &actual_l, 500);
+				 rev, len , &actual_l, 200);
 	return ret;
 }
 
@@ -167,7 +166,7 @@ static int lme2510_usb_talk(struct dvb_usb_device *d,
 
 	ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01);
 
-	msleep(12);
+	msleep(10);
 
 	ret |= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x01));
 
@@ -182,15 +181,13 @@ static int lme2510_usb_talk(struct dvb_usb_device *d,
 	return (ret < 0) ? -ENODEV : 0;
 }
 
-static int lme2510_usb_talk_restart(struct dvb_usb_device *d,
-		u8 *wbuf, int wlen, u8 *rbuf, int rlen) {
+static int lme2510_stream_restart(struct dvb_usb_device *d)
+{
 	static u8 stream_on[] = LME_ST_ON_W;
 	int ret;
 	u8 rbuff[10];
-	/*Send Normal Command*/
-	ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
 	/*Restart Stream Command*/
-	ret |= lme2510_usb_talk(d, stream_on, sizeof(stream_on),
+	ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on),
 			rbuff, sizeof(rbuff));
 	return ret;
 }
@@ -201,7 +198,7 @@ static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u16 keypress)
 	deb_info(1, "INT Key Keypress =%04x", keypress);
 
 	if (keypress > 0)
-		ir_keydown(d->rc_input_dev, keypress, 0);
+		rc_keydown(d->rc_dev, keypress, 0);
 
 	return 0;
 }
@@ -254,11 +251,16 @@ static void lme2510_int_response(struct urb *lme_urb)
 			case TUNER_S7395:
 				/* Tweak for earlier firmware*/
 				if (ibuf[1] == 0x03) {
+					if (ibuf[2] > 1)
+						st->signal_lock = ibuf[2];
 					st->signal_level = ibuf[3];
 					st->signal_sn = ibuf[4];
 				} else {
 					st->signal_level = ibuf[4];
 					st->signal_sn = ibuf[5];
+					st->signal_lock =
+						(st->signal_lock & 0xf7) +
+						((ibuf[2] & 0x01) << 0x03);
 				}
 				break;
 			default:
@@ -341,11 +343,10 @@ static int lme2510_msg(struct dvb_usb_device *d,
 					st->signal_lock = rbuf[1];
 					if ((st->stream_on & 1) &&
 						(st->signal_lock & 0x10)) {
-						lme2510_usb_talk_restart(d,
-							wbuf, wlen, rbuf, rlen);
+						lme2510_stream_restart(d);
 						st->i2c_talk_onoff = 0;
 					}
-				msleep(80);
+					msleep(80);
 				}
 			}
 			break;
@@ -355,15 +356,12 @@ static int lme2510_msg(struct dvb_usb_device *d,
 					st->signal_lock = rbuf[1];
 					if ((st->stream_on & 1) &&
 						(st->signal_lock & 0x8)) {
-						lme2510_usb_talk_restart(d,
-							wbuf, wlen, rbuf, rlen);
+						lme2510_stream_restart(d);
 						st->i2c_talk_onoff = 0;
 					}
 				}
 				if ((wbuf[3] != 0x6) & (wbuf[3] != 0x5))
 					msleep(5);
-
-
 			}
 			break;
 		default:
@@ -385,18 +383,16 @@ static int lme2510_msg(struct dvb_usb_device *d,
 				rbuf[0] = 0x55;
 				rbuf[1] = st->signal_sn;
 				break;
-			/*DiSEqC functions as per TDA10086*/
-			case 0x36:
-			case 0x48:
-			case 0x49:
-			case 0x4a:
-			case 0x4b:
-			case 0x4c:
-			case 0x4d:
-			if (wbuf[2] == 0x1c)
-					lme2510_usb_talk_restart(d,
-						wbuf, wlen, rbuf, rlen);
+			case 0x15:
+			case 0x16:
+			case 0x17:
+			case 0x18:
+				rbuf[0] = 0x55;
+				rbuf[1] = 0x00;
+				break;
 			default:
+				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+				st->i2c_talk_onoff = 1;
 				break;
 			}
 			break;
@@ -413,39 +409,22 @@ static int lme2510_msg(struct dvb_usb_device *d,
 				break;
 			case 0x24:
 				rbuf[0] = 0x55;
-				rbuf[1] = (st->signal_level & 0x80)
-						? 0 : st->signal_lock;
-				break;
-			case 0x6:
-				if (wbuf[2] == 0xd0)
-					lme2510_usb_talk(d,
-						wbuf, wlen, rbuf, rlen);
-				break;
-			case 0x1:
-				if (st->one_tune > 0)
-					break;
-				st->one_tune++;
-				st->i2c_talk_onoff = 1;
-			/*DiSEqC functions as per STV0288*/
-			case 0x5:
-			case 0x7:
-			case 0x8:
-			case 0x9:
-			case 0xa:
-			case 0xb:
-				if (wbuf[2] == 0xd0)
-					lme2510_usb_talk_restart(d,
-						wbuf, wlen, rbuf, rlen);
+				rbuf[1] = st->signal_lock;
 				break;
-			default:
+			case 0x2e:
+			case 0x26:
+			case 0x27:
 				rbuf[0] = 0x55;
 				rbuf[1] = 0x00;
 				break;
+			default:
+				lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+				st->i2c_talk_onoff = 1;
+				break;
 			}
 			break;
 		default:
 			break;
-
 		}
 
 		deb_info(4, "I2C From Interupt Message out(%02x) in(%02x)",
@@ -548,35 +527,26 @@ static int lme2510_identify_state(struct usb_device *udev,
 static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 {
 	struct lme2510_state *st = adap->dev->priv;
-	static u8 stream_on[] = LME_ST_ON_W;
 	static u8 clear_reg_3[] =  LME_CLEAR_PID;
 	static u8 rbuf[1];
-	static u8 timeout;
-	int ret = 0, len = 2, rlen = sizeof(rbuf);
+	int ret = 0, rlen = sizeof(rbuf);
 
 	deb_info(1, "STM  (%02x)", onoff);
 
-	if (onoff == 1)	{
-		st->i2c_talk_onoff = 0;
-		timeout = 0;
-		/* wait for i2C to be free */
-		while (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) {
-			timeout++;
-			if (timeout > 5)
-				return -ENODEV;
-		}
-		msleep(100);
-		ret |= lme2510_usb_talk(adap->dev,
-				 stream_on,  len, rbuf, rlen);
+	/* Streaming is started by FE_HAS_LOCK */
+	if (onoff == 1)
 		st->stream_on = 1;
-		st->one_tune = 0;
-		mutex_unlock(&adap->dev->i2c_mutex);
-	} else {
+	else {
 		deb_info(1, "STM Steam Off");
+		/* mutex is here only to avoid collision with I2C */
+		ret = mutex_lock_interruptible(&adap->dev->i2c_mutex);
+
 		ret |= lme2510_usb_talk(adap->dev, clear_reg_3,
 				sizeof(clear_reg_3), rbuf, rlen);
 		st->stream_on = 0;
 		st->i2c_talk_onoff = 1;
+
+		mutex_unlock(&adap->dev->i2c_mutex);
 	}
 
 	return (ret < 0) ? -ENODEV : 0;
@@ -585,41 +555,40 @@ static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 static int lme2510_int_service(struct dvb_usb_adapter *adap)
 {
 	struct dvb_usb_device *d = adap->dev;
-	struct input_dev *input_dev;
-	char *ir_codes = RC_MAP_LME2510;
-	int ret = 0;
+	struct rc_dev *rc;
+	int ret;
 
 	info("STA Configuring Remote");
 
-	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
-
-	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
-
-	input_dev = input_allocate_device();
-	if (!input_dev)
+	rc = rc_allocate_device();
+	if (!rc)
 		return -ENOMEM;
 
-	input_dev->name = "LME2510 Remote Control";
-	input_dev->phys = d->rc_phys;
-
-	usb_to_input_id(d->udev, &input_dev->id);
+	usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
+	strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
 
-	ret |= ir_input_register(input_dev, ir_codes, NULL, "LME 2510");
+	rc->input_name = "LME2510 Remote Control";
+	rc->input_phys = d->rc_phys;
+	rc->map_name = RC_MAP_LME2510;
+	rc->driver_name = "LME 2510";
+	usb_to_input_id(d->udev, &rc->input_id);
 
+	ret = rc_register_device(rc);
 	if (ret) {
-		input_free_device(input_dev);
+		rc_free_device(rc);
 		return ret;
 	}
+	d->rc_dev = rc;
 
-	d->rc_input_dev = input_dev;
 	/* Start the Interupt */
 	ret = lme2510_int_read(adap);
-
 	if (ret < 0) {
-		ir_input_unregister(input_dev);
-		input_free_device(input_dev);
+		rc_unregister_device(rc);
+		info("INT Unable to start Interupt Service");
+		return -ENODEV;
 	}
-	return (ret < 0) ? -ENODEV : 0;
+
+	return 0;
 }
 
 static u8 check_sum(u8 *p, u8 len)
@@ -668,6 +637,7 @@ static int lme2510_download_firmware(struct usb_device *dev,
 		ret |= (data[0] == 0x88) ? 0 : -1;
 		}
 	}
+
 	usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 			0x06, 0x80, 0x0200, 0x00, data, 0x0109, 1000);
 
@@ -701,10 +671,11 @@ static void lme_coldreset(struct usb_device *dev)
 	info("FRM Firmware Cold Reset");
 	ret |= lme2510_bulk_write(dev, data , len_in, 1); /*Cold Resetting*/
 	ret |= lme2510_bulk_read(dev, data, len_in, 1);
+
 	return;
 }
 
-static void lme_firmware_switch(struct usb_device *udev, int cold)
+static int lme_firmware_switch(struct usb_device *udev, int cold)
 {
 	const struct firmware *fw = NULL;
 	char lme2510c_s7395[] = "dvb-usb-lme2510c-s7395.fw";
@@ -712,8 +683,10 @@ static void lme_firmware_switch(struct usb_device *udev, int cold)
 	char *firm_msg[] = {"Loading", "Switching to"};
 	int ret;
 
+	cold = (cold > 0) ? (cold & 1) : 0;
+
 	if (udev->descriptor.idProduct == 0x1122)
-		return;
+		return 0;
 
 	switch (dvb_usb_lme2510_firmware) {
 	case 0:
@@ -740,22 +713,28 @@ static void lme_firmware_switch(struct usb_device *udev, int cold)
 		cold = 0;
 		break;
 	}
+
 	release_firmware(fw);
-	if (cold)
+
+	if (cold) {
 		lme_coldreset(udev);
-	return;
+		return -ENODEV;
+	}
+
+	return ret;
 }
 
 static int lme2510_kill_urb(struct usb_data_stream *stream)
 {
 	int i;
+
 	for (i = 0; i < stream->urbs_submitted; i++) {
 		deb_info(3, "killing URB no. %d.", i);
-
 		/* stop the URB */
 		usb_kill_urb(stream->urb_list[i]);
 	}
 	stream->urbs_submitted = 0;
+
 	return 0;
 }
 
@@ -783,18 +762,13 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
 					fe_sec_voltage_t voltage)
 {
 	struct dvb_usb_adapter *adap = fe->dvb->priv;
-	struct lme2510_state *st = adap->dev->priv;
 	static u8 voltage_low[]	= LME_VOLTAGE_L;
 	static u8 voltage_high[] = LME_VOLTAGE_H;
-	static u8 lnb_on[] = LNB_ON;
-	static u8 lnb_off[] = LNB_OFF;
 	static u8 rbuf[1];
 	int ret = 0, len = 3, rlen = 1;
 
-	if (st->stream_on == 1)
-		return 0;
-
-	ret |= lme2510_usb_talk(adap->dev, lnb_on, len, rbuf, rlen);
+	if (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0)
+			return -EAGAIN;
 
 	switch (voltage) {
 	case SEC_VOLTAGE_18:
@@ -803,94 +777,143 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
 		break;
 
 	case SEC_VOLTAGE_OFF:
-		ret |= lme2510_usb_talk(adap->dev,
-					lnb_off, len, rbuf, rlen);
 	case SEC_VOLTAGE_13:
 	default:
 		ret |= lme2510_usb_talk(adap->dev,
 				voltage_low, len, rbuf, rlen);
 		break;
+	}
 
+	mutex_unlock(&adap->dev->i2c_mutex);
 
-	};
-	st->i2c_talk_onoff = 1;
 	return (ret < 0) ? -ENODEV : 0;
 }
 
+static int lme_name(struct dvb_usb_adapter *adap)
+{
+	struct lme2510_state *st = adap->dev->priv;
+	const char *desc = adap->dev->desc->name;
+	char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395"};
+	char *name = adap->fe->ops.info.name;
+
+	strlcpy(name, desc, 128);
+	strlcat(name, fe_name[st->tuner_config], 128);
+
+	return 0;
+}
+
 static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
 {
-	int ret = 0;
 	struct lme2510_state *st = adap->dev->priv;
 
-	/* Interupt Start  */
-	ret = lme2510_int_service(adap);
-	if (ret < 0) {
-		info("INT Unable to start Interupt Service");
-		return -ENODEV;
-	}
+	int ret = 0;
 
 	st->i2c_talk_onoff = 1;
-	st->i2c_gate = 4;
 
+	st->i2c_gate = 4;
 	adap->fe = dvb_attach(tda10086_attach, &tda10086_config,
 		&adap->dev->i2c_adap);
 
 	if (adap->fe) {
 		info("TUN Found Frontend TDA10086");
-		memcpy(&adap->fe->ops.info.name,
-				&"DM04_LG_TDQY-P001F DVB-S", 24);
-		adap->fe->ops.set_voltage = dm04_lme2510_set_voltage;
 		st->i2c_tuner_gate_w = 4;
 		st->i2c_tuner_gate_r = 4;
 		st->i2c_tuner_addr = 0xc0;
-		if (dvb_attach(tda826x_attach, adap->fe, 0xc0,
-			&adap->dev->i2c_adap, 1)) {
-			info("TUN TDA8263 Found");
-			st->tuner_config = TUNER_LG;
-			if (dvb_usb_lme2510_firmware != 1) {
-				dvb_usb_lme2510_firmware = 1;
-				lme_firmware_switch(adap->dev->udev, 1);
-			}
-			return 0;
-		}
-		kfree(adap->fe);
-		adap->fe = NULL;
+		st->tuner_config = TUNER_LG;
+		if (dvb_usb_lme2510_firmware != 1) {
+			dvb_usb_lme2510_firmware = 1;
+			ret = lme_firmware_switch(adap->dev->udev, 1);
+		} else /*stops LG/Sharp multi tuner problems*/
+			dvb_usb_lme2510_firmware = 0;
+		goto end;
 	}
+
 	st->i2c_gate = 5;
 	adap->fe = dvb_attach(stv0288_attach, &lme_config,
 			&adap->dev->i2c_adap);
 
 	if (adap->fe) {
 		info("FE Found Stv0288");
-		memcpy(&adap->fe->ops.info.name,
-				&"DM04_SHARP:BS2F7HZ7395", 22);
-		adap->fe->ops.set_voltage = dm04_lme2510_set_voltage;
 		st->i2c_tuner_gate_w = 4;
 		st->i2c_tuner_gate_r = 5;
 		st->i2c_tuner_addr = 0xc0;
-		if (dvb_attach(ix2505v_attach , adap->fe, &lme_tuner,
-					&adap->dev->i2c_adap)) {
-			st->tuner_config = TUNER_S7395;
-			info("TUN Sharp IX2505V silicon tuner");
-			if (dvb_usb_lme2510_firmware != 0) {
-				dvb_usb_lme2510_firmware = 0;
-				lme_firmware_switch(adap->dev->udev, 1);
-			}
-			return 0;
+		st->tuner_config = TUNER_S7395;
+		if (dvb_usb_lme2510_firmware != 0) {
+			dvb_usb_lme2510_firmware = 0;
+			ret = lme_firmware_switch(adap->dev->udev, 1);
 		}
+	} else {
+		info("DM04 Not Supported");
+		return -ENODEV;
+	}
+
+end:	if (ret) {
 		kfree(adap->fe);
 		adap->fe = NULL;
+		return -ENODEV;
 	}
 
-	info("DM04 Not Supported");
-	return -ENODEV;
+	adap->fe->ops.set_voltage = dm04_lme2510_set_voltage;
+	ret = lme_name(adap);
+
+	return ret;
+}
+
+static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
+{
+	struct lme2510_state *st = adap->dev->priv;
+	char *tun_msg[] = {"", "TDA8263", "IX2505V"};
+	int ret = 0;
+
+	switch (st->tuner_config) {
+	case TUNER_LG:
+		if (dvb_attach(tda826x_attach, adap->fe, 0xc0,
+			&adap->dev->i2c_adap, 1))
+			ret = st->tuner_config;
+		break;
+	case TUNER_S7395:
+		if (dvb_attach(ix2505v_attach , adap->fe, &lme_tuner,
+			&adap->dev->i2c_adap))
+			ret = st->tuner_config;
+		break;
+	default:
+		break;
+	}
+
+	if (ret)
+		info("TUN Found %s tuner", tun_msg[ret]);
+	else {
+		info("TUN No tuner found --- reseting device");
+		lme_coldreset(adap->dev->udev);
+		return -ENODEV;
+	}
+
+	/* Start the Interupt & Remote*/
+	ret = lme2510_int_service(adap);
+
+	return ret;
 }
 
 static int lme2510_powerup(struct dvb_usb_device *d, int onoff)
 {
 	struct lme2510_state *st = d->priv;
+	static u8 lnb_on[] = LNB_ON;
+	static u8 lnb_off[] = LNB_OFF;
+	static u8 rbuf[1];
+	int ret, len = 3, rlen = 1;
+
+	ret = mutex_lock_interruptible(&d->i2c_mutex);
+
+	if (onoff)
+		ret |= lme2510_usb_talk(d, lnb_on, len, rbuf, rlen);
+	else
+		ret |= lme2510_usb_talk(d, lnb_off, len, rbuf, rlen);
+
 	st->i2c_talk_onoff = 1;
-	return 0;
+
+	mutex_unlock(&d->i2c_mutex);
+
+	return ret;
 }
 
 /* DVB USB Driver stuff */
@@ -951,6 +974,7 @@ static struct dvb_usb_device_properties lme2510_properties = {
 		{
 			.streaming_ctrl   = lme2510_streaming_ctrl,
 			.frontend_attach  = dm04_lme2510_frontend_attach,
+			.tuner_attach = dm04_lme2510_tuner,
 			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
@@ -971,7 +995,7 @@ static struct dvb_usb_device_properties lme2510_properties = {
 	.generic_bulk_ctrl_endpoint = 0,
 	.num_device_descs = 1,
 	.devices = {
-		{   "DM04 LME2510 DVB-S USB 2.0",
+		{   "DM04_LME2510_DVB-S",
 			{ &lme2510_table[0], NULL },
 			},
 
@@ -989,6 +1013,7 @@ static struct dvb_usb_device_properties lme2510c_properties = {
 		{
 			.streaming_ctrl   = lme2510_streaming_ctrl,
 			.frontend_attach  = dm04_lme2510_frontend_attach,
+			.tuner_attach = dm04_lme2510_tuner,
 			/* parameter for the MPEG2-data transfer */
 			.stream = {
 				.type = USB_BULK,
@@ -1009,7 +1034,7 @@ static struct dvb_usb_device_properties lme2510c_properties = {
 	.generic_bulk_ctrl_endpoint = 0,
 	.num_device_descs = 1,
 	.devices = {
-		{   "DM04 LME2510C USB2.0",
+		{   "DM04_LME2510C_DVB-S",
 			{ &lme2510_table[1], NULL },
 			},
 	}
@@ -1036,7 +1061,7 @@ void *lme2510_exit_int(struct dvb_usb_device *d)
 		usb_free_coherent(d->udev, 5000, st->buffer,
 				  st->lme_urb->transfer_dma);
 		info("Interupt Service Stopped");
-		ir_input_unregister(d->rc_input_dev);
+		rc_unregister_device(d->rc_dev);
 		info("Remote Stopped");
 	}
 	return buffer;
@@ -1055,7 +1080,7 @@ void lme2510_exit(struct usb_interface *intf)
 }
 
 static struct usb_driver lme2510_driver = {
-	.name		= "LME2510C_DVBS",
+	.name		= "LME2510C_DVB-S",
 	.probe		= lme2510_probe,
 	.disconnect	= lme2510_exit,
 	.id_table	= lme2510_table,
@@ -1083,6 +1108,6 @@ module_init(lme2510_module_init);
 module_exit(lme2510_module_exit);
 
 MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
-MODULE_DESCRIPTION("LM2510(C) DVB-S USB2.0");
-MODULE_VERSION("1.60");
+MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
+MODULE_VERSION("1.74");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index bdef1a18b66..da9dc91ce91 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -142,9 +142,9 @@ static int m920x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 	if ((ret = m920x_read(d->udev, M9206_CORE, 0x0, M9206_RC_KEY, rc_state + 1, 1)) != 0)
 		goto unlock;
 
-	for (i = 0; i < d->props.rc.legacy.rc_key_map_size; i++)
-		if (rc5_data(&d->props.rc.legacy.rc_key_map[i]) == rc_state[1]) {
-			*event = d->props.rc.legacy.rc_key_map[i].keycode;
+	for (i = 0; i < d->props.rc.legacy.rc_map_size; i++)
+		if (rc5_data(&d->props.rc.legacy.rc_map_table[i]) == rc_state[1]) {
+			*event = d->props.rc.legacy.rc_map_table[i].keycode;
 
 			switch(rc_state[0]) {
 			case 0x80:
@@ -589,7 +589,7 @@ static struct m920x_inits pinnacle310e_init[] = {
 };
 
 /* ir keymaps */
-static struct ir_scancode ir_codes_megasky_table[] = {
+static struct rc_map_table rc_map_megasky_table[] = {
 	{ 0x0012, KEY_POWER },
 	{ 0x001e, KEY_CYCLEWINDOWS }, /* min/max */
 	{ 0x0002, KEY_CHANNELUP },
@@ -608,7 +608,7 @@ static struct ir_scancode ir_codes_megasky_table[] = {
 	{ 0x000e, KEY_COFFEE }, /* "MTS" */
 };
 
-static struct ir_scancode ir_codes_tvwalkertwin_table[] = {
+static struct rc_map_table rc_map_tvwalkertwin_table[] = {
 	{ 0x0001, KEY_ZOOM }, /* Full Screen */
 	{ 0x0002, KEY_CAMERA }, /* snapshot */
 	{ 0x0003, KEY_MUTE },
@@ -628,7 +628,7 @@ static struct ir_scancode ir_codes_tvwalkertwin_table[] = {
 	{ 0x001e, KEY_VOLUMEUP },
 };
 
-static struct ir_scancode ir_codes_pinnacle310e_table[] = {
+static struct rc_map_table rc_map_pinnacle310e_table[] = {
 	{ 0x16, KEY_POWER },
 	{ 0x17, KEY_FAVORITES },
 	{ 0x0f, KEY_TEXT },
@@ -786,8 +786,8 @@ static struct dvb_usb_device_properties megasky_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_megasky_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_megasky_table),
+		.rc_map_table     = rc_map_megasky_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_megasky_table),
 		.rc_query         = m920x_rc_query,
 	},
 
@@ -889,8 +889,8 @@ static struct dvb_usb_device_properties tvwalkertwin_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_tvwalkertwin_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_tvwalkertwin_table),
+		.rc_map_table     = rc_map_tvwalkertwin_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_tvwalkertwin_table),
 		.rc_query         = m920x_rc_query,
 	},
 
@@ -998,8 +998,8 @@ static struct dvb_usb_device_properties pinnacle_pctv310e_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_pinnacle310e_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_pinnacle310e_table),
+		.rc_map_table     = rc_map_pinnacle310e_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_pinnacle310e_table),
 		.rc_query         = m920x_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
index 181f36a12e2..9d3cd2de46f 100644
--- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c
+++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c
@@ -21,7 +21,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 #define deb_ee(args...) dprintk(debug,0x02,args)
 
 /* Hauppauge NOVA-T USB2 keys */
-static struct ir_scancode ir_codes_haupp_table[] = {
+static struct rc_map_table rc_map_haupp_table[] = {
 	{ 0x1e00, KEY_0 },
 	{ 0x1e01, KEY_1 },
 	{ 0x1e02, KEY_2 },
@@ -91,14 +91,14 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 
 			deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle);
 
-			for (i = 0; i < ARRAY_SIZE(ir_codes_haupp_table); i++) {
-				if (rc5_data(&ir_codes_haupp_table[i]) == data &&
-					rc5_custom(&ir_codes_haupp_table[i]) == custom) {
+			for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) {
+				if (rc5_data(&rc_map_haupp_table[i]) == data &&
+					rc5_custom(&rc_map_haupp_table[i]) == custom) {
 
-					deb_rc("c: %x, d: %x\n", rc5_data(&ir_codes_haupp_table[i]),
-								 rc5_custom(&ir_codes_haupp_table[i]));
+					deb_rc("c: %x, d: %x\n", rc5_data(&rc_map_haupp_table[i]),
+								 rc5_custom(&rc_map_haupp_table[i]));
 
-					*event = ir_codes_haupp_table[i].keycode;
+					*event = rc_map_haupp_table[i].keycode;
 					*state = REMOTE_KEY_PRESSED;
 					if (st->old_toggle == toggle) {
 						if (st->last_repeat_count++ < 2)
@@ -197,8 +197,8 @@ static struct dvb_usb_device_properties nova_t_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 100,
-		.rc_key_map       = ir_codes_haupp_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_haupp_table),
+		.rc_map_table     = rc_map_haupp_table,
+		.rc_map_size      = ARRAY_SIZE(rc_map_haupp_table),
 		.rc_query         = nova_t_rc_query,
 	},
 
diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c
index f896337b453..1f1b7d6980a 100644
--- a/drivers/media/dvb/dvb-usb/opera1.c
+++ b/drivers/media/dvb/dvb-usb/opera1.c
@@ -35,7 +35,7 @@
 struct opera1_state {
 	u32 last_key_pressed;
 };
-struct ir_codes_opera_table {
+struct rc_map_opera_table {
 	u32 keycode;
 	u32 event;
 };
@@ -331,7 +331,7 @@ static int opera1_pid_filter_control(struct dvb_usb_adapter *adap, int onoff)
 	return 0;
 }
 
-static struct ir_scancode ir_codes_opera1_table[] = {
+static struct rc_map_table rc_map_opera1_table[] = {
 	{0x5fa0, KEY_1},
 	{0x51af, KEY_2},
 	{0x5da2, KEY_3},
@@ -404,12 +404,12 @@ static int opera1_rc_query(struct dvb_usb_device *dev, u32 * event, int *state)
 
 		send_key = (send_key & 0xffff) | 0x0100;
 
-		for (i = 0; i < ARRAY_SIZE(ir_codes_opera1_table); i++) {
-			if (rc5_scan(&ir_codes_opera1_table[i]) == (send_key & 0xffff)) {
+		for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) {
+			if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) {
 				*state = REMOTE_KEY_PRESSED;
-				*event = ir_codes_opera1_table[i].keycode;
+				*event = rc_map_opera1_table[i].keycode;
 				opst->last_key_pressed =
-					ir_codes_opera1_table[i].keycode;
+					rc_map_opera1_table[i].keycode;
 				break;
 			}
 			opst->last_key_pressed = 0;
@@ -497,8 +497,8 @@ static struct dvb_usb_device_properties opera1_properties = {
 	.i2c_algo = &opera1_i2c_algo,
 
 	.rc.legacy = {
-		.rc_key_map = ir_codes_opera1_table,
-		.rc_key_map_size = ARRAY_SIZE(ir_codes_opera1_table),
+		.rc_map_table = rc_map_opera1_table,
+		.rc_map_size = ARRAY_SIZE(rc_map_opera1_table),
 		.rc_interval = 200,
 		.rc_query = opera1_rc_query,
 	},
diff --git a/drivers/media/dvb/dvb-usb/ttusb2.c b/drivers/media/dvb/dvb-usb/ttusb2.c
index a6de489a6a3..0d4709ff9cb 100644
--- a/drivers/media/dvb/dvb-usb/ttusb2.c
+++ b/drivers/media/dvb/dvb-usb/ttusb2.c
@@ -43,6 +43,7 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 struct ttusb2_state {
 	u8 id;
+	u16 last_rc_key;
 };
 
 static int ttusb2_msg(struct dvb_usb_device *d, u8 cmd,
@@ -128,6 +129,33 @@ static struct i2c_algorithm ttusb2_i2c_algo = {
 	.functionality = ttusb2_i2c_func,
 };
 
+/* command to poll IR receiver (copied from pctv452e.c) */
+#define CMD_GET_IR_CODE     0x1b
+
+/* IR */
+static int tt3650_rc_query(struct dvb_usb_device *d)
+{
+	int ret;
+	u8 rx[9]; /* A CMD_GET_IR_CODE reply is 9 bytes long */
+	struct ttusb2_state *st = d->priv;
+	ret = ttusb2_msg(d, CMD_GET_IR_CODE, NULL, 0, rx, sizeof(rx));
+	if (ret != 0)
+		return ret;
+
+	if (rx[8] & 0x01) {
+		/* got a "press" event */
+		st->last_rc_key = (rx[3] << 8) | rx[2];
+		deb_info("%s: cmd=0x%02x sys=0x%02x\n", __func__, rx[2], rx[3]);
+		rc_keydown(d->rc_dev, st->last_rc_key, 0);
+	} else if (st->last_rc_key) {
+		rc_keyup(d->rc_dev);
+		st->last_rc_key = 0;
+	}
+
+	return 0;
+}
+
+
 /* Callbacks for DVB USB */
 static int ttusb2_identify_state (struct usb_device *udev, struct
 		dvb_usb_device_properties *props, struct dvb_usb_device_description **desc,
@@ -345,6 +373,13 @@ static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
 
 	.size_of_priv = sizeof(struct ttusb2_state),
 
+	.rc.core = {
+		.rc_interval      = 150, /* Less than IR_KEYPRESS_TIMEOUT */
+		.rc_codes         = RC_MAP_TT_1500,
+		.rc_query         = tt3650_rc_query,
+		.allowed_protos   = RC_TYPE_UNKNOWN,
+	},
+
 	.num_adapters = 1,
 	.adapter = {
 		{
diff --git a/drivers/media/dvb/dvb-usb/vp702x.c b/drivers/media/dvb/dvb-usb/vp702x.c
index 5c9f3275aaa..7890e75600d 100644
--- a/drivers/media/dvb/dvb-usb/vp702x.c
+++ b/drivers/media/dvb/dvb-usb/vp702x.c
@@ -174,7 +174,7 @@ static int vp702x_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 }
 
 /* keys for the enclosed remote control */
-static struct ir_scancode ir_codes_vp702x_table[] = {
+static struct rc_map_table rc_map_vp702x_table[] = {
 	{ 0x0001, KEY_1 },
 	{ 0x0002, KEY_2 },
 };
@@ -197,10 +197,10 @@ static int vp702x_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 		return 0;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(ir_codes_vp702x_table); i++)
-		if (rc5_custom(&ir_codes_vp702x_table[i]) == key[1]) {
+	for (i = 0; i < ARRAY_SIZE(rc_map_vp702x_table); i++)
+		if (rc5_custom(&rc_map_vp702x_table[i]) == key[1]) {
 			*state = REMOTE_KEY_PRESSED;
-			*event = ir_codes_vp702x_table[i].keycode;
+			*event = rc_map_vp702x_table[i].keycode;
 			break;
 		}
 	return 0;
@@ -284,8 +284,8 @@ static struct dvb_usb_device_properties vp702x_properties = {
 	.read_mac_address = vp702x_read_mac_addr,
 
 	.rc.legacy = {
-		.rc_key_map       = ir_codes_vp702x_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_vp702x_table),
+		.rc_map_table       = rc_map_vp702x_table,
+		.rc_map_size  = ARRAY_SIZE(rc_map_vp702x_table),
 		.rc_interval      = 400,
 		.rc_query         = vp702x_rc_query,
 	},
diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c
index f13791ca599..ab0ab3c35e8 100644
--- a/drivers/media/dvb/dvb-usb/vp7045.c
+++ b/drivers/media/dvb/dvb-usb/vp7045.c
@@ -99,7 +99,7 @@ static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff)
 
 /* The keymapping struct. Somehow this should be loaded to the driver, but
  * currently it is hardcoded. */
-static struct ir_scancode ir_codes_vp7045_table[] = {
+static struct rc_map_table rc_map_vp7045_table[] = {
 	{ 0x0016, KEY_POWER },
 	{ 0x0010, KEY_MUTE },
 	{ 0x0003, KEY_1 },
@@ -165,10 +165,10 @@ static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
 		return 0;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(ir_codes_vp7045_table); i++)
-		if (rc5_data(&ir_codes_vp7045_table[i]) == key) {
+	for (i = 0; i < ARRAY_SIZE(rc_map_vp7045_table); i++)
+		if (rc5_data(&rc_map_vp7045_table[i]) == key) {
 			*state = REMOTE_KEY_PRESSED;
-			*event = ir_codes_vp7045_table[i].keycode;
+			*event = rc_map_vp7045_table[i].keycode;
 			break;
 		}
 	return 0;
@@ -261,8 +261,8 @@ static struct dvb_usb_device_properties vp7045_properties = {
 
 	.rc.legacy = {
 		.rc_interval      = 400,
-		.rc_key_map       = ir_codes_vp7045_table,
-		.rc_key_map_size  = ARRAY_SIZE(ir_codes_vp7045_table),
+		.rc_map_table       = rc_map_vp7045_table,
+		.rc_map_size  = ARRAY_SIZE(rc_map_vp7045_table),
 		.rc_query         = vp7045_rc_query,
 	},
 
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index e9062b08a48..ef3e43a0319 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -12,9 +12,8 @@ config DVB_FE_CUSTOMISE
 
 	  If unsure say N.
 
-if DVB_FE_CUSTOMISE
-
 menu "Customise DVB Frontends"
+	visible if DVB_FE_CUSTOMISE
 
 comment "Multistandard (satellite) frontends"
 	depends on DVB_CORE
@@ -498,7 +497,7 @@ comment "ISDB-T (terrestrial) frontends"
 	depends on DVB_CORE
 
 config DVB_S921
-	tristate "Sharp S921 tuner"
+	tristate "Sharp S921 frontend"
 	depends on DVB_CORE && I2C
 	default m if DVB_FE_CUSTOMISE
 	help
@@ -513,6 +512,14 @@ config DVB_DIB8000
 	  A driver for DiBcom's DiB8000 ISDB-T/ISDB-Tsb demodulator.
 	  Say Y when you want to support this frontend.
 
+config DVB_MB86A20S
+	tristate "Fujitsu mb86a20s"
+	depends on DVB_CORE && I2C
+	default m if DVB_FE_CUSTOMISE
+	help
+	  A driver for Fujitsu mb86a20s ISDB-T/ISDB-Tsb demodulator.
+	  Say Y when you want to support this frontend.
+
 comment "Digital terrestrial only tuners/PLL"
 	depends on DVB_CORE
 
@@ -619,5 +626,3 @@ config DVB_DUMMY_FE
 	tristate "Dummy frontend driver"
 	default n
 endmenu
-
-endif
diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile
index 9a31985c0df..b1d9525aa7e 100644
--- a/drivers/media/dvb/frontends/Makefile
+++ b/drivers/media/dvb/frontends/Makefile
@@ -5,7 +5,6 @@
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/
 EXTRA_CFLAGS += -Idrivers/media/common/tuners/
 
-s921-objs := s921_module.o s921_core.o
 stb0899-objs = stb0899_drv.o stb0899_algo.o
 stv0900-objs = stv0900_core.o stv0900_sw.o
 au8522-objs = au8522_dig.o au8522_decoder.o
@@ -82,4 +81,5 @@ obj-$(CONFIG_DVB_ISL6423) += isl6423.o
 obj-$(CONFIG_DVB_EC100) += ec100.o
 obj-$(CONFIG_DVB_DS3000) += ds3000.o
 obj-$(CONFIG_DVB_MB86A16) += mb86a16.o
+obj-$(CONFIG_DVB_MB86A20S) += mb86a20s.o
 obj-$(CONFIG_DVB_IX2505V) += ix2505v.o
diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
index e2a95c07bab..ce222055526 100644
--- a/drivers/media/dvb/frontends/af9013.c
+++ b/drivers/media/dvb/frontends/af9013.c
@@ -964,7 +964,7 @@ error:
 static int af9013_update_signal_strength(struct dvb_frontend *fe)
 {
 	struct af9013_state *state = fe->demodulator_priv;
-	int ret;
+	int ret = 0;
 	u8 rf_gain, if_gain;
 	int signal_strength;
 
diff --git a/drivers/media/dvb/frontends/atbm8830.c b/drivers/media/dvb/frontends/atbm8830.c
index 43aac2f85c2..1539ea1f81a 100644
--- a/drivers/media/dvb/frontends/atbm8830.c
+++ b/drivers/media/dvb/frontends/atbm8830.c
@@ -50,8 +50,7 @@ static int atbm8830_write_reg(struct atbm_state *priv, u16 reg, u8 data)
 	msg2.addr = dev_addr;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%04X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%04X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg1, 1);
 	if (ret != 1)
@@ -77,8 +76,7 @@ static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, &msg1, 1);
 	if (ret != 1) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%04x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%04x, ret=%i\n", __func__, reg, ret);
 		return -EIO;
 	}
 
@@ -88,7 +86,7 @@ static int atbm8830_read_reg(struct atbm_state *priv, u16 reg, u8 *p_data)
 
 	*p_data = buf2[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%04X, data=0x%02X\n",
+		dprintk("%s: reg=0x%04X, data=0x%02X\n",
 			__func__, reg, buf2[0]);
 
 	return 0;
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c
index 6d9c5943eb3..b537891a4cc 100644
--- a/drivers/media/dvb/frontends/au8522_decoder.c
+++ b/drivers/media/dvb/frontends/au8522_decoder.c
@@ -278,10 +278,18 @@ static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode)
 			AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS);
 	au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR3_REG06BH,
 			AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
-			AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS);
-	au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
-			AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS);
+	if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 ||
+	    input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) {
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
+				AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO);
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
+				AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO);
+	} else {
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH,
+				AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS);
+		au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH,
+				AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS);
+	}
 	au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH,
 			AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS);
 	au8522_writereg(state, AU8522_TVDEC_UV_SEP_THR_REG06FH,
@@ -347,9 +355,11 @@ static void au8522_setup_cvbs_mode(struct au8522_state *state)
 	au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
 			AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
 
+	/* PGA in automatic mode */
 	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
-	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e);
-	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10);
+
+	/* Enable clamping control */
+	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
 
 	au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
 			AU8522_INPUT_CONTROL_REG081H_CVBS_CH1);
@@ -366,14 +376,14 @@ static void au8522_setup_cvbs_tuner_mode(struct au8522_state *state)
 	au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H,
 			AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS);
 
-	/* It's not clear why they turn off the PGA before enabling the clamp
-	   control, but the Windows trace does it so we will too... */
+	/* It's not clear why we have to have the PGA in automatic mode while
+	   enabling clamp control, but it's what Windows does */
 	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
 
 	/* Enable clamping control */
 	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e);
 
-	/* Turn on the PGA */
+	/* Disable automatic PGA (since the CVBS is coming from the tuner) */
 	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10);
 
 	/* Set input mode to CVBS on channel 4 with SIF audio input enabled */
@@ -396,7 +406,10 @@ static void au8522_setup_svideo_mode(struct au8522_state *state)
 	au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H,
 			AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13);
 
-	/* Disable clamping control (required for S-video) */
+	/* PGA in automatic mode */
+	au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00);
+
+	/* Enable clamping control */
 	au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00);
 
 	setup_decoder_defaults(state,
@@ -410,29 +423,15 @@ static void au8522_setup_svideo_mode(struct au8522_state *state)
 
 static void disable_audio_input(struct au8522_state *state)
 {
-	/* This can probably be optimized */
 	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00);
 	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00);
 	au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00);
-	au8522_writereg(state, AU8522_I2C_CONTROL_REG1_REG091H, 0x80);
-	au8522_writereg(state, AU8522_I2C_CONTROL_REG0_REG090H, 0x84);
-
-	au8522_writereg(state, AU8522_ENA_USB_REG101H, 0x00);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F);
-	au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F);
-	au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO);
-	au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x40);
-
-	au8522_writereg(state, AU8522_GPIO_DATA_REG0E2H, 0x11);
-	msleep(5);
-	au8522_writereg(state, AU8522_GPIO_DATA_REG0E2H, 0x00);
 
 	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x04);
-	au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03);
 	au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0x02);
 
 	au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H,
-			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS);
+			AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO);
 }
 
 /* 0=disable, 1=SIF */
@@ -622,7 +621,7 @@ static int au8522_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
 		return v4l2_ctrl_query_fill(qc, 0, 255, 1,
 					    AU8522_TVDEC_CONTRAST_REG00BH_CVBS);
 	case V4L2_CID_BRIGHTNESS:
-		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
+		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 109);
 	case V4L2_CID_SATURATION:
 		return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
 	case V4L2_CID_HUE:
diff --git a/drivers/media/dvb/frontends/au8522_priv.h b/drivers/media/dvb/frontends/au8522_priv.h
index 609cf04bc31..751e17d692a 100644
--- a/drivers/media/dvb/frontends/au8522_priv.h
+++ b/drivers/media/dvb/frontends/au8522_priv.h
@@ -397,7 +397,9 @@ void au8522_release_state(struct au8522_state *state);
 #define AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS		0x0A
 #define AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS		0x32
 #define AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS		0x34
+#define AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO		0x2a
 #define AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS		0x05
+#define AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO		0x15
 #define AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS		0x6E
 #define AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS			0x0F
 #define AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS		0x80
diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c
index 0f09fd31cb2..c7f5ccf54aa 100644
--- a/drivers/media/dvb/frontends/dib7000m.c
+++ b/drivers/media/dvb/frontends/dib7000m.c
@@ -805,7 +805,7 @@ static void dib7000m_set_channel(struct dib7000m_state *state, struct dvb_fronte
 	value = 0;
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
-		case /* 4K MODE */ 255: value |= (2 << 7); break;
+		case TRANSMISSION_MODE_4K: value |= (2 << 7); break;
 		default:
 		case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
 	}
@@ -866,7 +866,7 @@ static void dib7000m_set_channel(struct dib7000m_state *state, struct dvb_fronte
 	/* P_dvsy_sync_wait */
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_8K: value = 256; break;
-		case /* 4K MODE */ 255: value = 128; break;
+		case TRANSMISSION_MODE_4K: value = 128; break;
 		case TRANSMISSION_MODE_2K:
 		default: value = 64; break;
 	}
@@ -1020,7 +1020,7 @@ static int dib7000m_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	value = (6 << 8) | 0x80;
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: value |= (7 << 12); break;
-		case /* 4K MODE */ 255: value |= (8 << 12); break;
+		case TRANSMISSION_MODE_4K: value |= (8 << 12); break;
 		default:
 		case TRANSMISSION_MODE_8K: value |= (9 << 12); break;
 	}
@@ -1030,7 +1030,7 @@ static int dib7000m_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	value = (0 << 4);
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: value |= 0x6; break;
-		case /* 4K MODE */ 255: value |= 0x7; break;
+		case TRANSMISSION_MODE_4K: value |= 0x7; break;
 		default:
 		case TRANSMISSION_MODE_8K: value |= 0x8; break;
 	}
@@ -1040,7 +1040,7 @@ static int dib7000m_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	value = (0 << 4);
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: value |= 0x6; break;
-		case /* 4K MODE */ 255: value |= 0x7; break;
+		case TRANSMISSION_MODE_4K: value |= 0x7; break;
 		default:
 		case TRANSMISSION_MODE_8K: value |= 0x8; break;
 	}
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 3aed0d43392..6aa02cb8073 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -717,7 +717,7 @@ static void dib7000p_set_channel(struct dib7000p_state *state, struct dvb_fronte
 	value = 0;
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: value |= (0 << 7); break;
-		case /* 4K MODE */ 255: value |= (2 << 7); break;
+		case TRANSMISSION_MODE_4K: value |= (2 << 7); break;
 		default:
 		case TRANSMISSION_MODE_8K: value |= (1 << 7); break;
 	}
@@ -770,7 +770,7 @@ static void dib7000p_set_channel(struct dib7000p_state *state, struct dvb_fronte
 	/* P_dvsy_sync_wait */
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_8K: value = 256; break;
-		case /* 4K MODE */ 255: value = 128; break;
+		case TRANSMISSION_MODE_4K: value = 128; break;
 		case TRANSMISSION_MODE_2K:
 		default: value = 64; break;
 	}
@@ -994,7 +994,7 @@ static int dib7000p_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	tmp = (6 << 8) | 0x80;
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: tmp |= (7 << 12); break;
-		case /* 4K MODE */ 255: tmp |= (8 << 12); break;
+		case TRANSMISSION_MODE_4K: tmp |= (8 << 12); break;
 		default:
 		case TRANSMISSION_MODE_8K: tmp |= (9 << 12); break;
 	}
@@ -1004,7 +1004,7 @@ static int dib7000p_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	tmp = (0 << 4);
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: tmp |= 0x6; break;
-		case /* 4K MODE */ 255: tmp |= 0x7; break;
+		case TRANSMISSION_MODE_4K: tmp |= 0x7; break;
 		default:
 		case TRANSMISSION_MODE_8K: tmp |= 0x8; break;
 	}
@@ -1014,7 +1014,7 @@ static int dib7000p_tune(struct dvb_frontend *demod, struct dvb_frontend_paramet
 	tmp = (0 << 4);
 	switch (ch->u.ofdm.transmission_mode) {
 		case TRANSMISSION_MODE_2K: tmp |= 0x6; break;
-		case /* 4K MODE */ 255: tmp |= 0x7; break;
+		case TRANSMISSION_MODE_4K: tmp |= 0x7; break;
 		default:
 		case TRANSMISSION_MODE_8K: tmp |= 0x8; break;
 	}
diff --git a/drivers/media/dvb/frontends/dibx000_common.c b/drivers/media/dvb/frontends/dibx000_common.c
index a4991026254..2311c0a3406 100644
--- a/drivers/media/dvb/frontends/dibx000_common.c
+++ b/drivers/media/dvb/frontends/dibx000_common.c
@@ -130,6 +130,7 @@ static int i2c_adapter_init(struct i2c_adapter *i2c_adap,
 			    struct dibx000_i2c_master *mst)
 {
 	strncpy(i2c_adap->name, name, sizeof(i2c_adap->name));
+	i2c_adap->algo = algo;
 	i2c_adap->algo_data = NULL;
 	i2c_set_adapdata(i2c_adap, mst);
 	if (i2c_add_adapter(i2c_adap) < 0)
diff --git a/drivers/media/dvb/frontends/ix2505v.c b/drivers/media/dvb/frontends/ix2505v.c
index 55f2eba7bc9..6360c681ded 100644
--- a/drivers/media/dvb/frontends/ix2505v.c
+++ b/drivers/media/dvb/frontends/ix2505v.c
@@ -72,7 +72,7 @@ static int ix2505v_read_status_reg(struct ix2505v_state *state)
 	ret = i2c_transfer(state->i2c, msg, 1);
 	deb_i2c("Read %s ", __func__);
 
-	return (ret = 1) ? (int) b2[0] : -1;
+	return (ret == 1) ? (int) b2[0] : -1;
 }
 
 static int ix2505v_write(struct ix2505v_state *state, u8 buf[], u8 count)
diff --git a/drivers/media/dvb/frontends/lgs8gxx.c b/drivers/media/dvb/frontends/lgs8gxx.c
index 0fcddc4569d..1172b54689f 100644
--- a/drivers/media/dvb/frontends/lgs8gxx.c
+++ b/drivers/media/dvb/frontends/lgs8gxx.c
@@ -60,13 +60,12 @@ static int lgs8gxx_write_reg(struct lgs8gxx_state *priv, u8 reg, u8 data)
 		msg.addr += 0x02;
 
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, data);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, data);
 
 	ret = i2c_transfer(priv->i2c, &msg, 1);
 
 	if (ret != 1)
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, data=0x%x, ret=%i\n",
+		dprintk("%s: error reg=0x%x, data=0x%x, ret=%i\n",
 			__func__, reg, data, ret);
 
 	return (ret != 1) ? -1 : 0;
@@ -91,15 +90,13 @@ static int lgs8gxx_read_reg(struct lgs8gxx_state *priv, u8 reg, u8 *p_data)
 
 	ret = i2c_transfer(priv->i2c, msg, 2);
 	if (ret != 2) {
-		dprintk(KERN_DEBUG "%s: error reg=0x%x, ret=%i\n",
-			__func__, reg, ret);
+		dprintk("%s: error reg=0x%x, ret=%i\n", __func__, reg, ret);
 		return -1;
 	}
 
 	*p_data = b1[0];
 	if (debug >= 2)
-		printk(KERN_DEBUG "%s: reg=0x%02X, data=0x%02X\n",
-			__func__, reg, b1[0]);
+		dprintk("%s: reg=0x%02X, data=0x%02X\n", __func__, reg, b1[0]);
 	return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c
new file mode 100644
index 00000000000..d3ad3e75a35
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a20s.c
@@ -0,0 +1,615 @@
+/*
+ *   Fujitu mb86a20s ISDB-T/ISDB-Tsb Module driver
+ *
+ *   Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *   Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com>
+ *
+ *   FIXME: Need to port to DVB v5.2 API
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License as
+ *   published by the Free Software Foundation version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *   General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+#include "mb86a20s.h"
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+#define rc(args...)  do {						\
+	printk(KERN_ERR  "mb86a20s: " args);				\
+} while (0)
+
+#define dprintk(args...)						\
+	do {								\
+		if (debug) {						\
+			printk(KERN_DEBUG "mb86a20s: %s: ", __func__);	\
+			printk(args);					\
+		}							\
+	} while (0)
+
+struct mb86a20s_state {
+	struct i2c_adapter *i2c;
+	const struct mb86a20s_config *config;
+
+	struct dvb_frontend frontend;
+};
+
+struct regdata {
+	u8 reg;
+	u8 data;
+};
+
+/*
+ * Initialization sequence: Use whatevere default values that PV SBTVD
+ * does on its initialisation, obtained via USB snoop
+ */
+static struct regdata mb86a20s_init[] = {
+	{ 0x70, 0x0f },
+	{ 0x70, 0xff },
+	{ 0x08, 0x01 },
+	{ 0x09, 0x3e },
+	{ 0x50, 0xd1 },
+	{ 0x51, 0x22 },
+	{ 0x39, 0x01 },
+	{ 0x71, 0x00 },
+	{ 0x28, 0x2a },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0xff },
+	{ 0x2b, 0x80 },
+	{ 0x28, 0x20 },
+	{ 0x29, 0x33 },
+	{ 0x2a, 0xdf },
+	{ 0x2b, 0xa9 },
+	{ 0x3b, 0x21 },
+	{ 0x3c, 0x3a },
+	{ 0x01, 0x0d },
+	{ 0x04, 0x08 },
+	{ 0x05, 0x05 },
+	{ 0x04, 0x0e },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x0f },
+	{ 0x05, 0x14 },
+	{ 0x04, 0x0b },
+	{ 0x05, 0x8c },
+	{ 0x04, 0x00 },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x01 },
+	{ 0x05, 0x07 },
+	{ 0x04, 0x02 },
+	{ 0x05, 0x0f },
+	{ 0x04, 0x03 },
+	{ 0x05, 0xa0 },
+	{ 0x04, 0x09 },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x0a },
+	{ 0x05, 0xff },
+	{ 0x04, 0x27 },
+	{ 0x05, 0x64 },
+	{ 0x04, 0x28 },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x1e },
+	{ 0x05, 0xff },
+	{ 0x04, 0x29 },
+	{ 0x05, 0x0a },
+	{ 0x04, 0x32 },
+	{ 0x05, 0x0a },
+	{ 0x04, 0x14 },
+	{ 0x05, 0x02 },
+	{ 0x04, 0x04 },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x05 },
+	{ 0x05, 0x22 },
+	{ 0x04, 0x06 },
+	{ 0x05, 0x0e },
+	{ 0x04, 0x07 },
+	{ 0x05, 0xd8 },
+	{ 0x04, 0x12 },
+	{ 0x05, 0x00 },
+	{ 0x04, 0x13 },
+	{ 0x05, 0xff },
+	{ 0x52, 0x01 },
+	{ 0x50, 0xa7 },
+	{ 0x51, 0x00 },
+	{ 0x50, 0xa8 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xa9 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xaa },
+	{ 0x51, 0x00 },
+	{ 0x50, 0xab },
+	{ 0x51, 0xff },
+	{ 0x50, 0xac },
+	{ 0x51, 0xff },
+	{ 0x50, 0xad },
+	{ 0x51, 0x00 },
+	{ 0x50, 0xae },
+	{ 0x51, 0xff },
+	{ 0x50, 0xaf },
+	{ 0x51, 0xff },
+	{ 0x5e, 0x07 },
+	{ 0x50, 0xdc },
+	{ 0x51, 0x01 },
+	{ 0x50, 0xdd },
+	{ 0x51, 0xf4 },
+	{ 0x50, 0xde },
+	{ 0x51, 0x01 },
+	{ 0x50, 0xdf },
+	{ 0x51, 0xf4 },
+	{ 0x50, 0xe0 },
+	{ 0x51, 0x01 },
+	{ 0x50, 0xe1 },
+	{ 0x51, 0xf4 },
+	{ 0x50, 0xb0 },
+	{ 0x51, 0x07 },
+	{ 0x50, 0xb2 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xb3 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xb4 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xb5 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xb6 },
+	{ 0x51, 0xff },
+	{ 0x50, 0xb7 },
+	{ 0x51, 0xff },
+	{ 0x50, 0x50 },
+	{ 0x51, 0x02 },
+	{ 0x50, 0x51 },
+	{ 0x51, 0x04 },
+	{ 0x45, 0x04 },
+	{ 0x48, 0x04 },
+	{ 0x50, 0xd5 },
+	{ 0x51, 0x01 },		/* Serial */
+	{ 0x50, 0xd6 },
+	{ 0x51, 0x1f },
+	{ 0x50, 0xd2 },
+	{ 0x51, 0x03 },
+	{ 0x50, 0xd7 },
+	{ 0x51, 0x3f },
+	{ 0x1c, 0x01 },
+	{ 0x28, 0x06 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x03 },
+	{ 0x28, 0x07 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x0d },
+	{ 0x28, 0x08 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x02 },
+	{ 0x28, 0x09 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x01 },
+	{ 0x28, 0x0a },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x21 },
+	{ 0x28, 0x0b },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x29 },
+	{ 0x28, 0x0c },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x16 },
+	{ 0x28, 0x0d },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x31 },
+	{ 0x28, 0x0e },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x0e },
+	{ 0x28, 0x0f },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x4e },
+	{ 0x28, 0x10 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x46 },
+	{ 0x28, 0x11 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x0f },
+	{ 0x28, 0x12 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x56 },
+	{ 0x28, 0x13 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x35 },
+	{ 0x28, 0x14 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x01 },
+	{ 0x2b, 0xbe },
+	{ 0x28, 0x15 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x01 },
+	{ 0x2b, 0x84 },
+	{ 0x28, 0x16 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x03 },
+	{ 0x2b, 0xee },
+	{ 0x28, 0x17 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x98 },
+	{ 0x28, 0x18 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x00 },
+	{ 0x2b, 0x9f },
+	{ 0x28, 0x19 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x07 },
+	{ 0x2b, 0xb2 },
+	{ 0x28, 0x1a },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x06 },
+	{ 0x2b, 0xc2 },
+	{ 0x28, 0x1b },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x07 },
+	{ 0x2b, 0x4a },
+	{ 0x28, 0x1c },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x01 },
+	{ 0x2b, 0xbc },
+	{ 0x28, 0x1d },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x04 },
+	{ 0x2b, 0xba },
+	{ 0x28, 0x1e },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x06 },
+	{ 0x2b, 0x14 },
+	{ 0x50, 0x1e },
+	{ 0x51, 0x5d },
+	{ 0x50, 0x22 },
+	{ 0x51, 0x00 },
+	{ 0x50, 0x23 },
+	{ 0x51, 0xc8 },
+	{ 0x50, 0x24 },
+	{ 0x51, 0x00 },
+	{ 0x50, 0x25 },
+	{ 0x51, 0xf0 },
+	{ 0x50, 0x26 },
+	{ 0x51, 0x00 },
+	{ 0x50, 0x27 },
+	{ 0x51, 0xc3 },
+	{ 0x50, 0x39 },
+	{ 0x51, 0x02 },
+	{ 0x50, 0xd5 },
+	{ 0x51, 0x01 },
+	{ 0xd0, 0x00 },
+};
+
+static struct regdata mb86a20s_reset_reception[] = {
+	{ 0x70, 0xf0 },
+	{ 0x70, 0xff },
+	{ 0x08, 0x01 },
+	{ 0x08, 0x00 },
+};
+
+static int mb86a20s_i2c_writereg(struct mb86a20s_state *state,
+			     u8 i2c_addr, int reg, int data)
+{
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = {
+		.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
+	};
+	int rc;
+
+	rc = i2c_transfer(state->i2c, &msg, 1);
+	if (rc != 1) {
+		printk("%s: writereg rcor(rc == %i, reg == 0x%02x,"
+			 " data == 0x%02x)\n", __func__, rc, reg, data);
+		return rc;
+	}
+
+	return 0;
+}
+
+static int mb86a20s_i2c_writeregdata(struct mb86a20s_state *state,
+				     u8 i2c_addr, struct regdata *rd, int size)
+{
+	int i, rc;
+
+	for (i = 0; i < size; i++) {
+		rc = mb86a20s_i2c_writereg(state, i2c_addr, rd[i].reg,
+					   rd[i].data);
+		if (rc < 0)
+			return rc;
+	}
+	return 0;
+}
+
+static int mb86a20s_i2c_readreg(struct mb86a20s_state *state,
+				u8 i2c_addr, u8 reg)
+{
+	u8 val;
+	int rc;
+	struct i2c_msg msg[] = {
+		{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
+		{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
+	};
+
+	rc = i2c_transfer(state->i2c, msg, 2);
+
+	if (rc != 2) {
+		rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc);
+		return rc;
+	}
+
+	return val;
+}
+
+#define mb86a20s_readreg(state, reg) \
+	mb86a20s_i2c_readreg(state, state->config->demod_address, reg)
+#define mb86a20s_writereg(state, reg, val) \
+	mb86a20s_i2c_writereg(state, state->config->demod_address, reg, val)
+#define mb86a20s_writeregdata(state, regdata) \
+	mb86a20s_i2c_writeregdata(state, state->config->demod_address, \
+	regdata, ARRAY_SIZE(regdata))
+
+static int mb86a20s_initfe(struct dvb_frontend *fe)
+{
+	struct mb86a20s_state *state = fe->demodulator_priv;
+	int rc;
+	u8  regD5 = 1;
+
+	dprintk("\n");
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	/* Initialize the frontend */
+	rc = mb86a20s_writeregdata(state, mb86a20s_init);
+	if (rc < 0)
+		return rc;
+
+	if (!state->config->is_serial) {
+		regD5 &= ~1;
+
+		rc = mb86a20s_writereg(state, 0x50, 0xd5);
+		if (rc < 0)
+			return rc;
+		rc = mb86a20s_writereg(state, 0x51, regD5);
+		if (rc < 0)
+			return rc;
+	}
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	return 0;
+}
+
+static int mb86a20s_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	struct mb86a20s_state *state = fe->demodulator_priv;
+	unsigned rf_max, rf_min, rf;
+	u8	 val;
+
+	dprintk("\n");
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+
+	/* Does a binary search to get RF strength */
+	rf_max = 0xfff;
+	rf_min = 0;
+	do {
+		rf = (rf_max + rf_min) / 2;
+		mb86a20s_writereg(state, 0x04, 0x1f);
+		mb86a20s_writereg(state, 0x05, rf >> 8);
+		mb86a20s_writereg(state, 0x04, 0x20);
+		mb86a20s_writereg(state, 0x04, rf);
+
+		val = mb86a20s_readreg(state, 0x02);
+		if (val & 0x08)
+			rf_min = (rf_max + rf_min) / 2;
+		else
+			rf_max = (rf_max + rf_min) / 2;
+		if (rf_max - rf_min < 4) {
+			*strength = (((rf_max + rf_min) / 2) * 65535) / 4095;
+			break;
+		}
+	} while (1);
+
+	dprintk("signal strength = %d\n", *strength);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	return 0;
+}
+
+static int mb86a20s_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct mb86a20s_state *state = fe->demodulator_priv;
+	u8 val;
+
+	dprintk("\n");
+	*status = 0;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+	val = mb86a20s_readreg(state, 0x0a) & 0xf;
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	if (val >= 2)
+		*status |= FE_HAS_SIGNAL;
+
+	if (val >= 4)
+		*status |= FE_HAS_CARRIER;
+
+	if (val >= 5)
+		*status |= FE_HAS_VITERBI;
+
+	if (val >= 7)
+		*status |= FE_HAS_SYNC;
+
+	if (val >= 8)				/* Maybe 9? */
+		*status |= FE_HAS_LOCK;
+
+	dprintk("val = %d, status = 0x%02x\n", val, *status);
+
+	return 0;
+}
+
+static int mb86a20s_set_frontend(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *p)
+{
+	struct mb86a20s_state *state = fe->demodulator_priv;
+	int rc;
+
+	dprintk("\n");
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	fe->ops.tuner_ops.set_params(fe, p);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0);
+	rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception);
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	return rc;
+}
+
+static int mb86a20s_get_frontend(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *p)
+{
+
+	/* FIXME: For now, it does nothing */
+
+	fe->dtv_property_cache.bandwidth_hz = 6000000;
+	fe->dtv_property_cache.transmission_mode = TRANSMISSION_MODE_AUTO;
+	fe->dtv_property_cache.guard_interval = GUARD_INTERVAL_AUTO;
+	fe->dtv_property_cache.isdbt_partial_reception = 0;
+
+	return 0;
+}
+
+static int mb86a20s_tune(struct dvb_frontend *fe,
+			struct dvb_frontend_parameters *params,
+			unsigned int mode_flags,
+			unsigned int *delay,
+			fe_status_t *status)
+{
+	int rc = 0;
+
+	dprintk("\n");
+
+	if (params != NULL)
+		rc = mb86a20s_set_frontend(fe, params);
+
+	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
+		mb86a20s_read_status(fe, status);
+
+	return rc;
+}
+
+static void mb86a20s_release(struct dvb_frontend *fe)
+{
+	struct mb86a20s_state *state = fe->demodulator_priv;
+
+	dprintk("\n");
+
+	kfree(state);
+}
+
+static struct dvb_frontend_ops mb86a20s_ops;
+
+struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,
+				    struct i2c_adapter *i2c)
+{
+	u8	rev;
+
+	/* allocate memory for the internal state */
+	struct mb86a20s_state *state =
+		kzalloc(sizeof(struct mb86a20s_state), GFP_KERNEL);
+
+	dprintk("\n");
+	if (state == NULL) {
+		rc("Unable to kzalloc\n");
+		goto error;
+	}
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &mb86a20s_ops,
+		sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+
+	/* Check if it is a mb86a20s frontend */
+	rev = mb86a20s_readreg(state, 0);
+
+	if (rev == 0x13) {
+		printk(KERN_INFO "Detected a Fujitsu mb86a20s frontend\n");
+	} else {
+		printk(KERN_ERR "Frontend revision %d is unknown - aborting.\n",
+		       rev);
+		goto error;
+	}
+
+	return &state->frontend;
+
+error:
+	kfree(state);
+	return NULL;
+}
+EXPORT_SYMBOL(mb86a20s_attach);
+
+static struct dvb_frontend_ops mb86a20s_ops = {
+	/* Use dib8000 values per default */
+	.info = {
+		.name = "Fujitsu mb86A20s",
+		.type = FE_OFDM,
+		.caps = FE_CAN_INVERSION_AUTO | FE_CAN_RECOVER |
+			FE_CAN_FEC_1_2  | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			FE_CAN_FEC_5_6  | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			FE_CAN_QPSK     | FE_CAN_QAM_16  | FE_CAN_QAM_64 |
+			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_QAM_AUTO |
+			FE_CAN_GUARD_INTERVAL_AUTO    | FE_CAN_HIERARCHY_AUTO,
+		/* Actually, those values depend on the used tuner */
+		.frequency_min = 45000000,
+		.frequency_max = 864000000,
+		.frequency_stepsize = 62500,
+	},
+
+	.release = mb86a20s_release,
+
+	.init = mb86a20s_initfe,
+	.set_frontend = mb86a20s_set_frontend,
+	.get_frontend = mb86a20s_get_frontend,
+	.read_status = mb86a20s_read_status,
+	.read_signal_strength = mb86a20s_read_signal_strength,
+	.tune = mb86a20s_tune,
+};
+
+MODULE_DESCRIPTION("DVB Frontend module for Fujitsu mb86A20s hardware");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/mb86a20s.h b/drivers/media/dvb/frontends/mb86a20s.h
new file mode 100644
index 00000000000..bf22e77888b
--- /dev/null
+++ b/drivers/media/dvb/frontends/mb86a20s.h
@@ -0,0 +1,52 @@
+/*
+ *   Fujitsu mb86a20s driver
+ *
+ *   Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License as
+ *   published by the Free Software Foundation version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *   General Public License for more details.
+ */
+
+#ifndef MB86A20S_H
+#define MB86A20S_H
+
+#include <linux/dvb/frontend.h>
+
+/**
+ * struct mb86a20s_config - Define the per-device attributes of the frontend
+ *
+ * @demod_address:	the demodulator's i2c address
+ */
+
+struct mb86a20s_config {
+	u8 demod_address;
+	bool is_serial;
+};
+
+#if defined(CONFIG_DVB_MB86A20S) || (defined(CONFIG_DVB_MB86A20S_MODULE) \
+	&& defined(MODULE))
+extern struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,
+					   struct i2c_adapter *i2c);
+extern struct i2c_adapter *mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *);
+#else
+static inline struct dvb_frontend *mb86a20s_attach(
+	const struct mb86a20s_config *config, struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+static struct i2c_adapter *
+	mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *fe)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif /* MB86A20S */
diff --git a/drivers/media/dvb/frontends/s921.c b/drivers/media/dvb/frontends/s921.c
new file mode 100644
index 00000000000..ca0103d5f14
--- /dev/null
+++ b/drivers/media/dvb/frontends/s921.c
@@ -0,0 +1,548 @@
+/*
+ *   Sharp VA3A5JZ921 One Seg Broadcast Module driver
+ *   This device is labeled as just S. 921 at the top of the frontend can
+ *
+ *   Copyright (C) 2009-2010 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *   Copyright (C) 2009-2010 Douglas Landgraf <dougsland@redhat.com>
+ *
+ *   Developed for Leadership SBTVD 1seg device sold in Brazil
+ *
+ *   Frontend module based on cx24123 driver, getting some info from
+ *	the old s921 driver.
+ *
+ *   FIXME: Need to port to DVB v5.2 API
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License as
+ *   published by the Free Software Foundation version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *   General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <asm/div64.h>
+
+#include "dvb_frontend.h"
+#include "s921.h"
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");
+
+#define rc(args...)  do {						\
+	printk(KERN_ERR  "s921: " args);				\
+} while (0)
+
+#define dprintk(args...)						\
+	do {								\
+		if (debug) {						\
+			printk(KERN_DEBUG "s921: %s: ", __func__);	\
+			printk(args);					\
+		}							\
+	} while (0)
+
+struct s921_state {
+	struct i2c_adapter *i2c;
+	const struct s921_config *config;
+
+	struct dvb_frontend frontend;
+
+	/* The Demod can't easily provide these, we cache them */
+	u32 currentfreq;
+};
+
+/*
+ * Various tuner defaults need to be established for a given frequency kHz.
+ * fixme: The bounds on the bands do not match the doc in real life.
+ * fixme: Some of them have been moved, other might need adjustment.
+ */
+static struct s921_bandselect_val {
+	u32 freq_low;
+	u8  band_reg;
+} s921_bandselect[] = {
+	{         0, 0x7b },
+	{ 485140000, 0x5b },
+	{ 515140000, 0x3b },
+	{ 545140000, 0x1b },
+	{ 599140000, 0xfb },
+	{ 623140000, 0xdb },
+	{ 659140000, 0xbb },
+	{ 713140000, 0x9b },
+};
+
+struct regdata {
+	u8 reg;
+	u8 data;
+};
+
+static struct regdata s921_init[] = {
+	{ 0x01, 0x80 },		/* Probably, a reset sequence */
+	{ 0x01, 0x40 },
+	{ 0x01, 0x80 },
+	{ 0x01, 0x40 },
+
+	{ 0x02, 0x00 },
+	{ 0x03, 0x40 },
+	{ 0x04, 0x01 },
+	{ 0x05, 0x00 },
+	{ 0x06, 0x00 },
+	{ 0x07, 0x00 },
+	{ 0x08, 0x00 },
+	{ 0x09, 0x00 },
+	{ 0x0a, 0x00 },
+	{ 0x0b, 0x5a },
+	{ 0x0c, 0x00 },
+	{ 0x0d, 0x00 },
+	{ 0x0f, 0x00 },
+	{ 0x13, 0x1b },
+	{ 0x14, 0x80 },
+	{ 0x15, 0x40 },
+	{ 0x17, 0x70 },
+	{ 0x18, 0x01 },
+	{ 0x19, 0x12 },
+	{ 0x1a, 0x01 },
+	{ 0x1b, 0x12 },
+	{ 0x1c, 0xa0 },
+	{ 0x1d, 0x00 },
+	{ 0x1e, 0x0a },
+	{ 0x1f, 0x08 },
+	{ 0x20, 0x40 },
+	{ 0x21, 0xff },
+	{ 0x22, 0x4c },
+	{ 0x23, 0x4e },
+	{ 0x24, 0x4c },
+	{ 0x25, 0x00 },
+	{ 0x26, 0x00 },
+	{ 0x27, 0xf4 },
+	{ 0x28, 0x60 },
+	{ 0x29, 0x88 },
+	{ 0x2a, 0x40 },
+	{ 0x2b, 0x40 },
+	{ 0x2c, 0xff },
+	{ 0x2d, 0x00 },
+	{ 0x2e, 0xff },
+	{ 0x2f, 0x00 },
+	{ 0x30, 0x20 },
+	{ 0x31, 0x06 },
+	{ 0x32, 0x0c },
+	{ 0x34, 0x0f },
+	{ 0x37, 0xfe },
+	{ 0x38, 0x00 },
+	{ 0x39, 0x63 },
+	{ 0x3a, 0x10 },
+	{ 0x3b, 0x10 },
+	{ 0x47, 0x00 },
+	{ 0x49, 0xe5 },
+	{ 0x4b, 0x00 },
+	{ 0x50, 0xc0 },
+	{ 0x52, 0x20 },
+	{ 0x54, 0x5a },
+	{ 0x55, 0x5b },
+	{ 0x56, 0x40 },
+	{ 0x57, 0x70 },
+	{ 0x5c, 0x50 },
+	{ 0x5d, 0x00 },
+	{ 0x62, 0x17 },
+	{ 0x63, 0x2f },
+	{ 0x64, 0x6f },
+	{ 0x68, 0x00 },
+	{ 0x69, 0x89 },
+	{ 0x6a, 0x00 },
+	{ 0x6b, 0x00 },
+	{ 0x6c, 0x00 },
+	{ 0x6d, 0x00 },
+	{ 0x6e, 0x00 },
+	{ 0x70, 0x10 },
+	{ 0x71, 0x00 },
+	{ 0x75, 0x00 },
+	{ 0x76, 0x30 },
+	{ 0x77, 0x01 },
+	{ 0xaf, 0x00 },
+	{ 0xb0, 0xa0 },
+	{ 0xb2, 0x3d },
+	{ 0xb3, 0x25 },
+	{ 0xb4, 0x8b },
+	{ 0xb5, 0x4b },
+	{ 0xb6, 0x3f },
+	{ 0xb7, 0xff },
+	{ 0xb8, 0xff },
+	{ 0xb9, 0xfc },
+	{ 0xba, 0x00 },
+	{ 0xbb, 0x00 },
+	{ 0xbc, 0x00 },
+	{ 0xd0, 0x30 },
+	{ 0xe4, 0x84 },
+	{ 0xf0, 0x48 },
+	{ 0xf1, 0x19 },
+	{ 0xf2, 0x5a },
+	{ 0xf3, 0x8e },
+	{ 0xf4, 0x2d },
+	{ 0xf5, 0x07 },
+	{ 0xf6, 0x5a },
+	{ 0xf7, 0xba },
+	{ 0xf8, 0xd7 },
+};
+
+static struct regdata s921_prefreq[] = {
+	{ 0x47, 0x60 },
+	{ 0x68, 0x00 },
+	{ 0x69, 0x89 },
+	{ 0xf0, 0x48 },
+	{ 0xf1, 0x19 },
+};
+
+static struct regdata s921_postfreq[] = {
+	{ 0xf5, 0xae },
+	{ 0xf6, 0xb7 },
+	{ 0xf7, 0xba },
+	{ 0xf8, 0xd7 },
+	{ 0x68, 0x0a },
+	{ 0x69, 0x09 },
+};
+
+static int s921_i2c_writereg(struct s921_state *state,
+			     u8 i2c_addr, int reg, int data)
+{
+	u8 buf[] = { reg, data };
+	struct i2c_msg msg = {
+		.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
+	};
+	int rc;
+
+	rc = i2c_transfer(state->i2c, &msg, 1);
+	if (rc != 1) {
+		printk("%s: writereg rcor(rc == %i, reg == 0x%02x,"
+			 " data == 0x%02x)\n", __func__, rc, reg, data);
+		return rc;
+	}
+
+	return 0;
+}
+
+static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr,
+				 struct regdata *rd, int size)
+{
+	int i, rc;
+
+	for (i = 0; i < size; i++) {
+		rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data);
+		if (rc < 0)
+			return rc;
+	}
+	return 0;
+}
+
+static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg)
+{
+	u8 val;
+	int rc;
+	struct i2c_msg msg[] = {
+		{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
+		{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
+	};
+
+	rc = i2c_transfer(state->i2c, msg, 2);
+
+	if (rc != 2) {
+		rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc);
+		return rc;
+	}
+
+	return val;
+}
+
+#define s921_readreg(state, reg) \
+	s921_i2c_readreg(state, state->config->demod_address, reg)
+#define s921_writereg(state, reg, val) \
+	s921_i2c_writereg(state, state->config->demod_address, reg, val)
+#define s921_writeregdata(state, regdata) \
+	s921_i2c_writeregdata(state, state->config->demod_address, \
+	regdata, ARRAY_SIZE(regdata))
+
+static int s921_pll_tune(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *p)
+{
+	struct s921_state *state = fe->demodulator_priv;
+	int band, rc, i;
+	unsigned long f_offset;
+	u8 f_switch;
+	u64 offset;
+
+	dprintk("frequency=%i\n", p->frequency);
+
+	for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++)
+		if (p->frequency < s921_bandselect[band].freq_low)
+			break;
+	band--;
+
+	if (band < 0) {
+		rc("%s: frequency out of range\n", __func__);
+		return -EINVAL;
+	}
+
+	f_switch = s921_bandselect[band].band_reg;
+
+	offset = ((u64)p->frequency) * 258;
+	do_div(offset, 6000000);
+	f_offset = ((unsigned long)offset) + 2321;
+
+	rc = s921_writeregdata(state, s921_prefreq);
+	if (rc < 0)
+		return rc;
+
+	rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff);
+	if (rc < 0)
+		return rc;
+
+	rc = s921_writereg(state, 0xf3, f_offset & 0xff);
+	if (rc < 0)
+		return rc;
+
+	rc = s921_writereg(state, 0xf4, f_switch);
+	if (rc < 0)
+		return rc;
+
+	rc = s921_writeregdata(state, s921_postfreq);
+	if (rc < 0)
+		return rc;
+
+	for (i = 0 ; i < 6; i++) {
+		rc = s921_readreg(state, 0x80);
+		dprintk("status 0x80: %02x\n", rc);
+	}
+	rc = s921_writereg(state, 0x01, 0x40);
+	if (rc < 0)
+		return rc;
+
+	rc = s921_readreg(state, 0x01);
+	dprintk("status 0x01: %02x\n", rc);
+
+	rc = s921_readreg(state, 0x80);
+	dprintk("status 0x80: %02x\n", rc);
+
+	rc = s921_readreg(state, 0x80);
+	dprintk("status 0x80: %02x\n", rc);
+
+	rc = s921_readreg(state, 0x32);
+	dprintk("status 0x32: %02x\n", rc);
+
+	dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset);
+
+	return 0;
+}
+
+static int s921_initfe(struct dvb_frontend *fe)
+{
+	struct s921_state *state = fe->demodulator_priv;
+	int rc;
+
+	dprintk("\n");
+
+	rc = s921_writeregdata(state, s921_init);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+static int s921_read_status(struct dvb_frontend *fe, fe_status_t *status)
+{
+	struct s921_state *state = fe->demodulator_priv;
+	int regstatus, rc;
+
+	*status = 0;
+
+	rc = s921_readreg(state, 0x81);
+	if (rc < 0)
+		return rc;
+
+	regstatus = rc << 8;
+
+	rc = s921_readreg(state, 0x82);
+	if (rc < 0)
+		return rc;
+
+	regstatus |= rc;
+
+	dprintk("status = %04x\n", regstatus);
+
+	/* Full Sync - We don't know what each bit means on regs 0x81/0x82 */
+	if ((regstatus & 0xff) == 0x40) {
+		*status = FE_HAS_SIGNAL  |
+			  FE_HAS_CARRIER |
+			  FE_HAS_VITERBI |
+			  FE_HAS_SYNC    |
+			  FE_HAS_LOCK;
+	} else if (regstatus & 0x40) {
+		/* This is close to Full Sync, but not enough to get useful info */
+		*status = FE_HAS_SIGNAL  |
+			  FE_HAS_CARRIER |
+			  FE_HAS_VITERBI |
+			  FE_HAS_SYNC;
+	}
+
+	return 0;
+}
+
+static int s921_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
+{
+	fe_status_t	status;
+	struct s921_state *state = fe->demodulator_priv;
+	int rc;
+
+	/* FIXME: Use the proper register for it... 0x80? */
+	rc = s921_read_status(fe, &status);
+	if (rc < 0)
+		return rc;
+
+	*strength = (status & FE_HAS_LOCK) ? 0xffff : 0;
+
+	dprintk("strength = 0x%04x\n", *strength);
+
+	rc = s921_readreg(state, 0x01);
+	dprintk("status 0x01: %02x\n", rc);
+
+	rc = s921_readreg(state, 0x80);
+	dprintk("status 0x80: %02x\n", rc);
+
+	rc = s921_readreg(state, 0x32);
+	dprintk("status 0x32: %02x\n", rc);
+
+	return 0;
+}
+
+static int s921_set_frontend(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *p)
+{
+	struct s921_state *state = fe->demodulator_priv;
+	int rc;
+
+	dprintk("\n");
+
+	/* FIXME: We don't know how to use non-auto mode */
+
+	rc = s921_pll_tune(fe, p);
+	if (rc < 0)
+		return rc;
+
+	state->currentfreq = p->frequency;
+
+	return 0;
+}
+
+static int s921_get_frontend(struct dvb_frontend *fe,
+	struct dvb_frontend_parameters *p)
+{
+	struct s921_state *state = fe->demodulator_priv;
+
+	/* FIXME: Probably it is possible to get it from regs f1 and f2 */
+	p->frequency = state->currentfreq;
+
+	return 0;
+}
+
+static int s921_tune(struct dvb_frontend *fe,
+			struct dvb_frontend_parameters *params,
+			unsigned int mode_flags,
+			unsigned int *delay,
+			fe_status_t *status)
+{
+	int rc = 0;
+
+	dprintk("\n");
+
+	if (params != NULL)
+		rc = s921_set_frontend(fe, params);
+
+	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
+		s921_read_status(fe, status);
+
+	return rc;
+}
+
+static int s921_get_algo(struct dvb_frontend *fe)
+{
+	return 1; /* FE_ALGO_HW */
+}
+
+static void s921_release(struct dvb_frontend *fe)
+{
+	struct s921_state *state = fe->demodulator_priv;
+
+	dprintk("\n");
+	kfree(state);
+}
+
+static struct dvb_frontend_ops s921_ops;
+
+struct dvb_frontend *s921_attach(const struct s921_config *config,
+				    struct i2c_adapter *i2c)
+{
+	/* allocate memory for the internal state */
+	struct s921_state *state =
+		kzalloc(sizeof(struct s921_state), GFP_KERNEL);
+
+	dprintk("\n");
+	if (state == NULL) {
+		rc("Unable to kzalloc\n");
+		goto rcor;
+	}
+
+	/* setup the state */
+	state->config = config;
+	state->i2c = i2c;
+
+	/* create dvb_frontend */
+	memcpy(&state->frontend.ops, &s921_ops,
+		sizeof(struct dvb_frontend_ops));
+	state->frontend.demodulator_priv = state;
+
+	return &state->frontend;
+
+rcor:
+	kfree(state);
+
+	return NULL;
+}
+EXPORT_SYMBOL(s921_attach);
+
+static struct dvb_frontend_ops s921_ops = {
+	/* Use dib8000 values per default */
+	.info = {
+		.name = "Sharp S921",
+		.type = FE_OFDM,
+		.frequency_min = 470000000,
+		/*
+		 * Max should be 770MHz instead, according with Sharp docs,
+		 * but Leadership doc says it works up to 806 MHz. This is
+		 * required to get channel 69, used in Brazil
+		 */
+		.frequency_max = 806000000,
+		.frequency_tolerance = 0,
+		 .caps = FE_CAN_INVERSION_AUTO |
+			 FE_CAN_FEC_1_2  | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
+			 FE_CAN_FEC_5_6  | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
+			 FE_CAN_QPSK     | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
+			 FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
+			 FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER |
+			 FE_CAN_HIERARCHY_AUTO,
+	},
+
+	.release = s921_release,
+
+	.init = s921_initfe,
+	.set_frontend = s921_set_frontend,
+	.get_frontend = s921_get_frontend,
+	.read_status = s921_read_status,
+	.read_signal_strength = s921_read_signal_strength,
+	.tune = s921_tune,
+	.get_frontend_algo = s921_get_algo,
+};
+
+MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Douglas Landgraf <dougsland@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/s921.h b/drivers/media/dvb/frontends/s921.h
new file mode 100644
index 00000000000..f220d8299c8
--- /dev/null
+++ b/drivers/media/dvb/frontends/s921.h
@@ -0,0 +1,47 @@
+/*
+ *   Sharp s921 driver
+ *
+ *   Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *   Copyright (C) 2009 Douglas Landgraf <dougsland@redhat.com>
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License as
+ *   published by the Free Software Foundation version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *   General Public License for more details.
+ */
+
+#ifndef S921_H
+#define S921_H
+
+#include <linux/dvb/frontend.h>
+
+struct s921_config {
+	/* the demodulator's i2c address */
+	u8 demod_address;
+};
+
+#if defined(CONFIG_DVB_S921) || (defined(CONFIG_DVB_S921_MODULE) \
+	&& defined(MODULE))
+extern struct dvb_frontend *s921_attach(const struct s921_config *config,
+					   struct i2c_adapter *i2c);
+extern struct i2c_adapter *s921_get_tuner_i2c_adapter(struct dvb_frontend *);
+#else
+static inline struct dvb_frontend *s921_attach(
+	const struct s921_config *config, struct i2c_adapter *i2c)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+static struct i2c_adapter *
+	s921_get_tuner_i2c_adapter(struct dvb_frontend *fe)
+{
+	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+	return NULL;
+}
+#endif
+
+#endif /* S921_H */
diff --git a/drivers/media/dvb/frontends/s921_core.c b/drivers/media/dvb/frontends/s921_core.c
deleted file mode 100644
index 974b52be9ae..00000000000
--- a/drivers/media/dvb/frontends/s921_core.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * Driver for Sharp s921 driver
- *
- * Copyright (C) 2008 Markus Rechberger <mrechberger@sundtek.de>
- *
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include "s921_core.h"
-
-static int s921_isdb_init(struct s921_isdb_t *dev);
-static int s921_isdb_set_parameters(struct s921_isdb_t *dev, struct s921_isdb_t_transmission_mode_params *params);
-static int s921_isdb_tune(struct s921_isdb_t *dev, struct s921_isdb_t_tune_params *params);
-static int s921_isdb_get_status(struct s921_isdb_t *dev, void *data);
-
-static u8 init_table[]={ 0x01, 0x40, 0x02, 0x00, 0x03, 0x40, 0x04, 0x01,
-			 0x05, 0x00, 0x06, 0x00, 0x07, 0x00, 0x08, 0x00,
-			 0x09, 0x00, 0x0a, 0x00, 0x0b, 0x5a, 0x0c, 0x00,
-			 0x0d, 0x00, 0x0f, 0x00, 0x13, 0x1b, 0x14, 0x80,
-			 0x15, 0x40, 0x17, 0x70, 0x18, 0x01, 0x19, 0x12,
-			 0x1a, 0x01, 0x1b, 0x12, 0x1c, 0xa0, 0x1d, 0x00,
-			 0x1e, 0x0a, 0x1f, 0x08, 0x20, 0x40, 0x21, 0xff,
-			 0x22, 0x4c, 0x23, 0x4e, 0x24, 0x4c, 0x25, 0x00,
-			 0x26, 0x00, 0x27, 0xf4, 0x28, 0x60, 0x29, 0x88,
-			 0x2a, 0x40, 0x2b, 0x40, 0x2c, 0xff, 0x2d, 0x00,
-			 0x2e, 0xff, 0x2f, 0x00, 0x30, 0x20, 0x31, 0x06,
-			 0x32, 0x0c, 0x34, 0x0f, 0x37, 0xfe, 0x38, 0x00,
-			 0x39, 0x63, 0x3a, 0x10, 0x3b, 0x10, 0x47, 0x00,
-			 0x49, 0xe5, 0x4b, 0x00, 0x50, 0xc0, 0x52, 0x20,
-			 0x54, 0x5a, 0x55, 0x5b, 0x56, 0x40, 0x57, 0x70,
-			 0x5c, 0x50, 0x5d, 0x00, 0x62, 0x17, 0x63, 0x2f,
-			 0x64, 0x6f, 0x68, 0x00, 0x69, 0x89, 0x6a, 0x00,
-			 0x6b, 0x00, 0x6c, 0x00, 0x6d, 0x00, 0x6e, 0x00,
-			 0x70, 0x00, 0x71, 0x00, 0x75, 0x00, 0x76, 0x30,
-			 0x77, 0x01, 0xaf, 0x00, 0xb0, 0xa0, 0xb2, 0x3d,
-			 0xb3, 0x25, 0xb4, 0x8b, 0xb5, 0x4b, 0xb6, 0x3f,
-			 0xb7, 0xff, 0xb8, 0xff, 0xb9, 0xfc, 0xba, 0x00,
-			 0xbb, 0x00, 0xbc, 0x00, 0xd0, 0x30, 0xe4, 0x84,
-			 0xf0, 0x48, 0xf1, 0x19, 0xf2, 0x5a, 0xf3, 0x8e,
-			 0xf4, 0x2d, 0xf5, 0x07, 0xf6, 0x5a, 0xf7, 0xba,
-			 0xf8, 0xd7 };
-
-static u8 c_table[]={ 0x58, 0x8a, 0x7b, 0x59, 0x8c, 0x7b, 0x5a, 0x8e, 0x5b,
-		      0x5b, 0x90, 0x5b, 0x5c, 0x92, 0x5b, 0x5d, 0x94, 0x5b,
-		      0x5e, 0x96, 0x5b, 0x5f, 0x98, 0x3b, 0x60, 0x9a, 0x3b,
-		      0x61, 0x9c, 0x3b, 0x62, 0x9e, 0x3b, 0x63, 0xa0, 0x3b,
-		      0x64, 0xa2, 0x1b, 0x65, 0xa4, 0x1b, 0x66, 0xa6, 0x1b,
-		      0x67, 0xa8, 0x1b, 0x68, 0xaa, 0x1b, 0x69, 0xac, 0x1b,
-		      0x6a, 0xae, 0x1b, 0x6b, 0xb0, 0x1b, 0x6c, 0xb2, 0x1b,
-		      0x6d, 0xb4, 0xfb, 0x6e, 0xb6, 0xfb, 0x6f, 0xb8, 0xfb,
-		      0x70, 0xba, 0xfb, 0x71, 0xbc, 0xdb, 0x72, 0xbe, 0xdb,
-		      0x73, 0xc0, 0xdb, 0x74, 0xc2, 0xdb, 0x75, 0xc4, 0xdb,
-		      0x76, 0xc6, 0xdb, 0x77, 0xc8, 0xbb, 0x78, 0xca, 0xbb,
-		      0x79, 0xcc, 0xbb, 0x7a, 0xce, 0xbb, 0x7b, 0xd0, 0xbb,
-		      0x7c, 0xd2, 0xbb, 0x7d, 0xd4, 0xbb, 0x7e, 0xd6, 0xbb,
-		      0x7f, 0xd8, 0xbb, 0x80, 0xda, 0x9b, 0x81, 0xdc, 0x9b,
-		      0x82, 0xde, 0x9b, 0x83, 0xe0, 0x9b, 0x84, 0xe2, 0x9b,
-		      0x85, 0xe4, 0x9b, 0x86, 0xe6, 0x9b, 0x87, 0xe8, 0x9b,
-		      0x88, 0xea, 0x9b, 0x89, 0xec, 0x9b };
-
-int s921_isdb_cmd(struct s921_isdb_t *dev, u32 cmd, void *data) {
-	switch(cmd) {
-	case ISDB_T_CMD_INIT:
-		s921_isdb_init(dev);
-		break;
-	case ISDB_T_CMD_SET_PARAM:
-		s921_isdb_set_parameters(dev, data);
-		break;
-	case ISDB_T_CMD_TUNE:
-		s921_isdb_tune(dev, data);
-		break;
-	case ISDB_T_CMD_GET_STATUS:
-		s921_isdb_get_status(dev, data);
-		break;
-	default:
-		printk("unhandled command\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-static int s921_isdb_init(struct s921_isdb_t *dev) {
-	unsigned int i;
-	unsigned int ret;
-	printk("isdb_init\n");
-	for (i = 0; i < sizeof(init_table); i+=2) {
-		ret = dev->i2c_write(dev->priv_dev, init_table[i], init_table[i+1]);
-		if (ret != 0) {
-			printk("i2c write failed\n");
-			return ret;
-		}
-	}
-	return 0;
-}
-
-static int s921_isdb_set_parameters(struct s921_isdb_t *dev, struct s921_isdb_t_transmission_mode_params *params) {
-
-	int ret;
-	/* auto is sufficient for now, lateron this should be reflected in an extra interface */
-
-
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb0, 0xa0); //mod_b2);
-	ret = dev->i2c_write(dev->priv_dev, 0xb2, 0x3d); //mod_b2);
-
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb3, 0x25); //mod_b3);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb4, 0x8b); //mod_b4);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb5, 0x4b); //mod_b5);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb6, 0x3f); //mod_b6);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xb7, 0x3f); //mod_b7);
-	if (ret < 0)
-		return -EINVAL;
-
-	return E_OK;
-}
-
-static int s921_isdb_tune(struct s921_isdb_t *dev, struct s921_isdb_t_tune_params *params) {
-
-	int ret;
-	int index;
-
-	index = (params->frequency - 473143000)/6000000;
-
-	if (index > 48) {
-		return -EINVAL;
-	}
-
-	dev->i2c_write(dev->priv_dev, 0x47, 0x60);
-
-	ret = dev->i2c_write(dev->priv_dev, 0x68, 0x00);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0x69, 0x89);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf0, 0x48);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf1, 0x19);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf2, c_table[index*3]);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf3, c_table[index*3+1]);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf4, c_table[index*3+2]);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf5, 0xae);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf6, 0xb7);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf7, 0xba);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0xf8, 0xd7);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0x68, 0x0a);
-	if (ret < 0)
-		return -EINVAL;
-
-	ret = dev->i2c_write(dev->priv_dev, 0x69, 0x09);
-	if (ret < 0)
-		return -EINVAL;
-
-	dev->i2c_write(dev->priv_dev, 0x01, 0x40);
-	return 0;
-}
-
-static int s921_isdb_get_status(struct s921_isdb_t *dev, void *data) {
-	unsigned int *ret = (unsigned int*)data;
-	u8 ifagc_dt;
-	u8 rfagc_dt;
-
-	mdelay(10);
-	ifagc_dt = dev->i2c_read(dev->priv_dev, 0x81);
-	rfagc_dt = dev->i2c_read(dev->priv_dev, 0x82);
-	if (rfagc_dt == 0x40) {
-		*ret = 1;
-	}
-	return 0;
-}
diff --git a/drivers/media/dvb/frontends/s921_core.h b/drivers/media/dvb/frontends/s921_core.h
deleted file mode 100644
index de2f10a44e7..00000000000
--- a/drivers/media/dvb/frontends/s921_core.h
+++ /dev/null
@@ -1,114 +0,0 @@
-#ifndef _S921_CORE_H
-#define _S921_CORE_H
-//#define u8 unsigned int
-//#define u32 unsigned int
-
-
-
-//#define EINVAL -1
-#define E_OK 0
-
-struct s921_isdb_t {
-	void *priv_dev;
-	int (*i2c_write)(void *dev, u8 reg, u8 val);
-	int (*i2c_read)(void *dev, u8 reg);
-};
-
-#define ISDB_T_CMD_INIT       0
-#define ISDB_T_CMD_SET_PARAM  1
-#define ISDB_T_CMD_TUNE       2
-#define ISDB_T_CMD_GET_STATUS 3
-
-struct s921_isdb_t_tune_params {
-	u32 frequency;
-};
-
-struct s921_isdb_t_status {
-};
-
-struct s921_isdb_t_transmission_mode_params {
-	u8 mode;
-	u8 layer_a_mode;
-#define ISDB_T_LA_MODE_1 0
-#define ISDB_T_LA_MODE_2 1
-#define ISDB_T_LA_MODE_3 2
-	u8 layer_a_carrier_modulation;
-#define ISDB_T_LA_CM_DQPSK 0
-#define ISDB_T_LA_CM_QPSK  1
-#define ISDB_T_LA_CM_16QAM 2
-#define ISDB_T_LA_CM_64QAM 3
-#define ISDB_T_LA_CM_NOLAYER 4
-	u8 layer_a_code_rate;
-#define ISDB_T_LA_CR_1_2   0
-#define ISDB_T_LA_CR_2_3   1
-#define ISDB_T_LA_CR_3_4   2
-#define ISDB_T_LA_CR_5_6   4
-#define ISDB_T_LA_CR_7_8   8
-#define ISDB_T_LA_CR_NOLAYER   16
-	u8 layer_a_time_interleave;
-#define ISDB_T_LA_TI_0  0
-#define ISDB_T_LA_TI_1  1
-#define ISDB_T_LA_TI_2  2
-#define ISDB_T_LA_TI_4  4
-#define ISDB_T_LA_TI_8  8
-#define ISDB_T_LA_TI_16 16
-#define ISDB_T_LA_TI_32 32
-	u8 layer_a_nseg;
-
-	u8 layer_b_mode;
-#define ISDB_T_LB_MODE_1 0
-#define ISDB_T_LB_MODE_2 1
-#define ISDB_T_LB_MODE_3 2
-	u8 layer_b_carrier_modulation;
-#define ISDB_T_LB_CM_DQPSK 0
-#define ISDB_T_LB_CM_QPSK  1
-#define ISDB_T_LB_CM_16QAM 2
-#define ISDB_T_LB_CM_64QAM 3
-#define ISDB_T_LB_CM_NOLAYER 4
-	u8 layer_b_code_rate;
-#define ISDB_T_LB_CR_1_2   0
-#define ISDB_T_LB_CR_2_3   1
-#define ISDB_T_LB_CR_3_4   2
-#define ISDB_T_LB_CR_5_6   4
-#define ISDB_T_LB_CR_7_8   8
-#define ISDB_T_LB_CR_NOLAYER   16
-	u8 layer_b_time_interleave;
-#define ISDB_T_LB_TI_0  0
-#define ISDB_T_LB_TI_1  1
-#define ISDB_T_LB_TI_2  2
-#define ISDB_T_LB_TI_4  4
-#define ISDB_T_LB_TI_8  8
-#define ISDB_T_LB_TI_16 16
-#define ISDB_T_LB_TI_32 32
-	u8 layer_b_nseg;
-
-	u8 layer_c_mode;
-#define ISDB_T_LC_MODE_1 0
-#define ISDB_T_LC_MODE_2 1
-#define ISDB_T_LC_MODE_3 2
-	u8 layer_c_carrier_modulation;
-#define ISDB_T_LC_CM_DQPSK 0
-#define ISDB_T_LC_CM_QPSK  1
-#define ISDB_T_LC_CM_16QAM 2
-#define ISDB_T_LC_CM_64QAM 3
-#define ISDB_T_LC_CM_NOLAYER 4
-	u8 layer_c_code_rate;
-#define ISDB_T_LC_CR_1_2   0
-#define ISDB_T_LC_CR_2_3   1
-#define ISDB_T_LC_CR_3_4   2
-#define ISDB_T_LC_CR_5_6   4
-#define ISDB_T_LC_CR_7_8   8
-#define ISDB_T_LC_CR_NOLAYER   16
-	u8 layer_c_time_interleave;
-#define ISDB_T_LC_TI_0  0
-#define ISDB_T_LC_TI_1  1
-#define ISDB_T_LC_TI_2  2
-#define ISDB_T_LC_TI_4  4
-#define ISDB_T_LC_TI_8  8
-#define ISDB_T_LC_TI_16 16
-#define ISDB_T_LC_TI_32 32
-	u8 layer_c_nseg;
-};
-
-int s921_isdb_cmd(struct s921_isdb_t *dev, u32 cmd, void *data);
-#endif
diff --git a/drivers/media/dvb/frontends/s921_module.c b/drivers/media/dvb/frontends/s921_module.c
deleted file mode 100644
index 0eefff61cc5..00000000000
--- a/drivers/media/dvb/frontends/s921_module.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * Driver for Sharp s921 driver
- *
- * Copyright (C) 2008 Markus Rechberger <mrechberger@sundtek.de>
- *
- * All rights reserved.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include "dvb_frontend.h"
-#include "s921_module.h"
-#include "s921_core.h"
-
-static  unsigned int debug = 0;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug,"s921 debugging (default off)");
-
-#define dprintk(fmt, args...) if (debug) do {\
-			printk("s921 debug: " fmt, ##args); } while (0)
-
-struct s921_state
-{
-	struct dvb_frontend frontend;
-	fe_modulation_t current_modulation;
-	__u32 snr;
-	__u32 current_frequency;
-	__u8 addr;
-	struct s921_isdb_t dev;
-	struct i2c_adapter *i2c;
-};
-
-static int s921_set_parameters(struct dvb_frontend *fe, struct dvb_frontend_parameters *param) {
-	struct s921_state *state = (struct s921_state *)fe->demodulator_priv;
-	struct s921_isdb_t_transmission_mode_params params;
-	struct s921_isdb_t_tune_params tune_params;
-
-	tune_params.frequency = param->frequency;
-	s921_isdb_cmd(&state->dev, ISDB_T_CMD_SET_PARAM, &params);
-	s921_isdb_cmd(&state->dev, ISDB_T_CMD_TUNE, &tune_params);
-	mdelay(100);
-	return 0;
-}
-
-static int s921_init(struct dvb_frontend *fe) {
-	printk("s921 init\n");
-	return 0;
-}
-
-static int s921_sleep(struct dvb_frontend *fe) {
-	printk("s921 sleep\n");
-	return 0;
-}
-
-static int s921_read_status(struct dvb_frontend *fe, fe_status_t *status)
-{
-	struct s921_state *state = (struct s921_state *)fe->demodulator_priv;
-	unsigned int ret;
-	mdelay(5);
-	s921_isdb_cmd(&state->dev, ISDB_T_CMD_GET_STATUS, &ret);
-	*status = 0;
-
-	printk("status: %02x\n", ret);
-	if (ret == 1) {
-		*status |= FE_HAS_CARRIER;
-		*status |= FE_HAS_VITERBI;
-		*status |= FE_HAS_LOCK;
-		*status |= FE_HAS_SYNC;
-		*status |= FE_HAS_SIGNAL;
-	}
-
-	return 0;
-}
-
-static int s921_read_ber(struct dvb_frontend *fe, __u32 *ber)
-{
-	dprintk("read ber\n");
-	return 0;
-}
-
-static int s921_read_snr(struct dvb_frontend *fe, __u16 *snr)
-{
-	dprintk("read snr\n");
-	return 0;
-}
-
-static int s921_read_ucblocks(struct dvb_frontend *fe, __u32 *ucblocks)
-{
-	dprintk("read ucblocks\n");
-	return 0;
-}
-
-static void s921_release(struct dvb_frontend *fe)
-{
-	struct s921_state *state = (struct s921_state *)fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops demod_s921={
-	.info = {
-		.name			= "SHARP S921",
-		.type			= FE_OFDM,
-		.frequency_min		= 473143000,
-		.frequency_max		= 767143000,
-		.frequency_stepsize	=   6000000,
-		.frequency_tolerance	= 0,
-		.caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-			FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
-			FE_CAN_FEC_AUTO |
-			FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-			FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_GUARD_INTERVAL_AUTO |
-			FE_CAN_HIERARCHY_AUTO | FE_CAN_RECOVER |
-			FE_CAN_MUTE_TS
-	},
-	.init = s921_init,
-	.sleep = s921_sleep,
-	.set_frontend = s921_set_parameters,
-	.read_snr = s921_read_snr,
-	.read_ber = s921_read_ber,
-	.read_status = s921_read_status,
-	.read_ucblocks = s921_read_ucblocks,
-	.release = s921_release,
-};
-
-static int s921_write(void *dev, u8 reg, u8 val) {
-	struct s921_state *state = dev;
-	char buf[2]={reg,val};
-	int err;
-	struct i2c_msg i2cmsgs = {
-		.addr = state->addr,
-		.flags = 0,
-		.len = 2,
-		.buf = buf
-	};
-
-	if((err = i2c_transfer(state->i2c, &i2cmsgs, 1))<0) {
-		printk("%s i2c_transfer error %d\n", __func__, err);
-		if (err < 0)
-			return err;
-		else
-			return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int s921_read(void *dev, u8 reg) {
-	struct s921_state *state = dev;
-	u8 b1;
-	int ret;
-	struct i2c_msg msg[2] = { { .addr = state->addr,
-				    .flags = 0,
-				    .buf = &reg, .len = 1 },
-				  { .addr = state->addr,
-				    .flags = I2C_M_RD,
-				    .buf = &b1, .len = 1 } };
-
-	ret = i2c_transfer(state->i2c, msg, 2);
-	if (ret != 2)
-		return ret;
-	return b1;
-}
-
-struct dvb_frontend* s921_attach(const struct s921_config *config,
-					   struct i2c_adapter *i2c)
-{
-
-	struct s921_state *state;
-	state = kzalloc(sizeof(struct s921_state), GFP_KERNEL);
-	if (state == NULL)
-		return NULL;
-
-	state->addr = config->i2c_address;
-	state->i2c = i2c;
-	state->dev.i2c_write = &s921_write;
-	state->dev.i2c_read = &s921_read;
-	state->dev.priv_dev = state;
-
-	s921_isdb_cmd(&state->dev, ISDB_T_CMD_INIT, NULL);
-
-	memcpy(&state->frontend.ops, &demod_s921, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-}
-
-EXPORT_SYMBOL_GPL(s921_attach);
-MODULE_AUTHOR("Markus Rechberger <mrechberger@empiatech.com>");
-MODULE_DESCRIPTION("Sharp S921 ISDB-T 1Seg");
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/s921_module.h b/drivers/media/dvb/frontends/s921_module.h
deleted file mode 100644
index 78660424ba9..00000000000
--- a/drivers/media/dvb/frontends/s921_module.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- *  Driver for DVB-T s921 demodulator
- *
- *  Copyright (C) 2008 Markus Rechberger <mrechberger@sundtek.de>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.=
- */
-
-#ifndef S921_MODULE_H
-#define S921_MODULE_H
-
-#include <linux/dvb/frontend.h>
-#include "s921_core.h"
-
-int s921_isdb_init(struct s921_isdb_t *dev);
-int s921_isdb_cmd(struct s921_isdb_t *dev, u32 cmd, void *data);
-
-struct s921_config
-{
-	/* demodulator's I2C address */
-	u8 i2c_address;
-};
-
-#if defined(CONFIG_DVB_S921) || (defined(CONFIG_DVB_S921_MODULE) && defined(MODULE))
-extern struct dvb_frontend* s921_attach(const struct s921_config *config,
-					   struct i2c_adapter *i2c);
-#else
-static inline struct dvb_frontend* s921_attach(const struct s921_config *config,
-					   struct i2c_adapter *i2c)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
-#endif /* CONFIG_DVB_S921 */
-
-#endif /* S921_H */
diff --git a/drivers/media/dvb/frontends/stb0899_drv.c b/drivers/media/dvb/frontends/stb0899_drv.c
index 8e38fcee564..37a222d9ddb 100644
--- a/drivers/media/dvb/frontends/stb0899_drv.c
+++ b/drivers/media/dvb/frontends/stb0899_drv.c
@@ -714,7 +714,7 @@ static int stb0899_send_diseqc_msg(struct dvb_frontend *fe, struct dvb_diseqc_ma
 	reg = stb0899_read_reg(state, STB0899_DISCNTRL1);
 	STB0899_SETFIELD_VAL(DISPRECHARGE, reg, 0);
 	stb0899_write_reg(state, STB0899_DISCNTRL1, reg);
-
+	msleep(100);
 	return 0;
 }
 
diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c
index 80a9e4cba63..64673b8b64a 100644
--- a/drivers/media/dvb/frontends/stb6100.c
+++ b/drivers/media/dvb/frontends/stb6100.c
@@ -51,7 +51,7 @@ module_param(verbose, int, 0644);
 		if (x > y)								\
 			printk(format, ##arg);						\
 	}										\
-} while(0)
+} while (0)
 
 struct stb6100_lkup {
 	u32 val_low;
@@ -117,7 +117,10 @@ static const struct stb6100_regmask stb6100_template[] = {
 	[STB6100_TEST3]		= { 0x00, 0xde },
 };
 
-static void stb6100_normalise_regs(u8 regs[])
+/*
+ * Currently unused. Some boards might need it in the future
+ */
+static inline void stb6100_normalise_regs(u8 regs[])
 {
 	int i;
 
@@ -157,13 +160,25 @@ static int stb6100_read_reg(struct stb6100_state *state, u8 reg)
 	u8 regs[STB6100_NUMREGS];
 	int rc;
 
+	struct i2c_msg msg = {
+		.addr	= state->config->tuner_address + reg,
+		.flags	= I2C_M_RD,
+		.buf	= regs,
+		.len	= 1
+	};
+
+	rc = i2c_transfer(state->i2c, &msg, 1);
+
 	if (unlikely(reg >= STB6100_NUMREGS)) {
 		dprintk(verbose, FE_ERROR, 1, "Invalid register offset 0x%x", reg);
 		return -EINVAL;
 	}
-	if ((rc = stb6100_read_regs(state, regs)) < 0)
-		return rc;
-	return (unsigned int)regs[reg];
+	if (unlikely(verbose > FE_DEBUG)) {
+		dprintk(verbose, FE_DEBUG, 1, "    Read from 0x%02x", state->config->tuner_address);
+		dprintk(verbose, FE_DEBUG, 1, "        %s: 0x%02x", stb6100_regnames[reg], regs[0]);
+	}
+
+	return (unsigned int)regs[0];
 }
 
 static int stb6100_write_reg_range(struct stb6100_state *state, u8 buf[], int start, int len)
@@ -211,20 +226,17 @@ static int stb6100_write_reg(struct stb6100_state *state, u8 reg, u8 data)
 	return stb6100_write_reg_range(state, &data, reg, 1);
 }
 
-static int stb6100_write_regs(struct stb6100_state *state, u8 regs[])
-{
-	stb6100_normalise_regs(regs);
-	return stb6100_write_reg_range(state, &regs[1], 1, STB6100_NUMREGS - 1);
-}
 
 static int stb6100_get_status(struct dvb_frontend *fe, u32 *status)
 {
 	int rc;
 	struct stb6100_state *state = fe->tuner_priv;
 
-	if ((rc = stb6100_read_reg(state, STB6100_LD)) < 0)
+	rc = stb6100_read_reg(state, STB6100_LD);
+	if (rc < 0) {
+		dprintk(verbose, FE_ERROR, 1, "%s failed", __func__);
 		return rc;
-
+	}
 	return (rc & STB6100_LD_LOCK) ? TUNER_STATUS_LOCKED : 0;
 }
 
@@ -234,7 +246,8 @@ static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 	u8 f;
 	struct stb6100_state *state = fe->tuner_priv;
 
-	if ((rc = stb6100_read_reg(state, STB6100_F)) < 0)
+	rc = stb6100_read_reg(state, STB6100_F);
+	if (rc < 0)
 		return rc;
 	f = rc & STB6100_F_F;
 
@@ -265,14 +278,21 @@ static int stb6100_set_bandwidth(struct dvb_frontend *fe, u32 bandwidth)
 	/* Turn on LPF bandwidth setting clock control,
 	 * set bandwidth, wait 10ms, turn off.
 	 */
-	if ((rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK)) < 0)
+	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d | STB6100_FCCK_FCCK);
+	if (rc < 0)
 		return rc;
-	if ((rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp)) < 0)
+	rc = stb6100_write_reg(state, STB6100_F, 0xc0 | tmp);
+	if (rc < 0)
 		return rc;
-	msleep(1);
-	if ((rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d)) < 0)
+
+	msleep(5);  /*  This is dangerous as another (related) thread may start */
+
+	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
+	if (rc < 0)
 		return rc;
 
+	msleep(10);  /*  This is dangerous as another (related) thread may start */
+
 	return 0;
 }
 
@@ -284,7 +304,8 @@ static int stb6100_get_frequency(struct dvb_frontend *fe, u32 *frequency)
 	struct stb6100_state *state = fe->tuner_priv;
 	u8 regs[STB6100_NUMREGS];
 
-	if ((rc = stb6100_read_regs(state, regs)) < 0)
+	rc = stb6100_read_regs(state, regs);
+	if (rc < 0)
 		return rc;
 
 	odiv = (regs[STB6100_VCO] & STB6100_VCO_ODIV) >> STB6100_VCO_ODIV_SHIFT;
@@ -312,8 +333,7 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
 	u8 regs[STB6100_NUMREGS];
 	u8 g, psd2, odiv;
 
-	if ((rc = stb6100_read_regs(state, regs)) < 0)
-		return rc;
+	dprintk(verbose, FE_DEBUG, 1, "Version 2010-8-14 13:51");
 
 	if (fe->ops.get_frontend) {
 		dprintk(verbose, FE_DEBUG, 1, "Get frontend parameters");
@@ -321,96 +341,140 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
 	}
 	srate = p.u.qpsk.symbol_rate;
 
-	regs[STB6100_DLB] = 0xdc;
-	/* Disable LPEN */
-	regs[STB6100_LPEN] &= ~STB6100_LPEN_LPEN; /* PLL Loop disabled */
+	/* Set up tuner cleanly, LPF calibration on */
+	rc = stb6100_write_reg(state, STB6100_FCCK, 0x4d | STB6100_FCCK_FCCK);
+	if (rc < 0)
+		return rc;  /* allow LPF calibration */
 
-	if ((rc = stb6100_write_regs(state, regs)) < 0)
+	/* PLL Loop disabled, bias on, VCO on, synth on */
+	regs[STB6100_LPEN] = 0xeb;
+	rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
+	if (rc < 0)
 		return rc;
 
-	/* Baseband gain.	*/
-	if (srate >= 15000000)
-		g = 9;  //  +4 dB
-	else if (srate >= 5000000)
-		g = 11; //  +8 dB
-	else
-		g = 14; // +14 dB
-
-	regs[STB6100_G] = (regs[STB6100_G] & ~STB6100_G_G) | g;
-	regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */
-	regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */
+	/* Program the registers with their data values */
 
 	/* VCO divide ratio (LO divide ratio, VCO prescaler enable).	*/
 	if (frequency <= 1075000)
 		odiv = 1;
 	else
 		odiv = 0;
-	regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_ODIV) | (odiv << STB6100_VCO_ODIV_SHIFT);
 
-	if ((frequency > 1075000) && (frequency <= 1325000))
-		psd2 = 0;
-	else
-		psd2 = 1;
-	regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT);
+	/* VCO enabled, seach clock off as per LL3.7, 3.4.1 */
+	regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);
 
 	/* OSM	*/
 	for (ptr = lkup;
 	     (ptr->val_high != 0) && !CHKRANGE(frequency, ptr->val_low, ptr->val_high);
 	     ptr++);
+
 	if (ptr->val_high == 0) {
 		printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency);
 		return -EINVAL;
 	}
 	regs[STB6100_VCO] = (regs[STB6100_VCO] & ~STB6100_VCO_OSM) | ptr->reg;
+	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
+	if (rc < 0)
+		return rc;
 
+	if ((frequency > 1075000) && (frequency <= 1325000))
+		psd2 = 0;
+	else
+		psd2 = 1;
 	/* F(VCO) = F(LO) * (ODIV == 0 ? 2 : 4)			*/
 	fvco = frequency << (1 + odiv);
 	/* N(I) = floor(f(VCO) / (f(XTAL) * (PSD2 ? 2 : 1)))	*/
 	nint = fvco / (state->reference << psd2);
 	/* N(F) = round(f(VCO) / f(XTAL) * (PSD2 ? 2 : 1) - N(I)) * 2 ^ 9	*/
 	nfrac = DIV_ROUND_CLOSEST((fvco - (nint * state->reference << psd2))
-					 << (9 - psd2),
-				  state->reference);
+					 << (9 - psd2), state->reference);
+
+	/* NI */
+	regs[STB6100_NI] = nint;
+	rc = stb6100_write_reg(state, STB6100_NI, regs[STB6100_NI]);
+	if (rc < 0)
+		return rc;
+
+	/* NF */
+	regs[STB6100_NF_LSB] = nfrac;
+	rc = stb6100_write_reg(state, STB6100_NF_LSB, regs[STB6100_NF_LSB]);
+	if (rc < 0)
+		return rc;
+
+	/* K */
+	regs[STB6100_K] = (0x38 & ~STB6100_K_PSD2) | (psd2 << STB6100_K_PSD2_SHIFT);
+	regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB);
+	rc = stb6100_write_reg(state, STB6100_K, regs[STB6100_K]);
+	if (rc < 0)
+		return rc;
+
+	/* G Baseband gain. */
+	if (srate >= 15000000)
+		g = 9;  /*  +4 dB */
+	else if (srate >= 5000000)
+		g = 11; /*  +8 dB */
+	else
+		g = 14; /* +14 dB */
+
+	regs[STB6100_G] = (0x10 & ~STB6100_G_G) | g;
+	regs[STB6100_G] &= ~STB6100_G_GCT; /* mask GCT */
+	regs[STB6100_G] |= (1 << 5); /* 2Vp-p Mode */
+	rc = stb6100_write_reg(state, STB6100_G, regs[STB6100_G]);
+	if (rc < 0)
+		return rc;
+
+	/* F we don't write as it is set up in BW set */
+
+	/* DLB set DC servo loop BW to 160Hz (LLA 3.8 / 2.1) */
+	regs[STB6100_DLB] = 0xcc;
+	rc = stb6100_write_reg(state, STB6100_DLB, regs[STB6100_DLB]);
+	if (rc < 0)
+		return rc;
+
 	dprintk(verbose, FE_DEBUG, 1,
 		"frequency = %u, srate = %u, g = %u, odiv = %u, psd2 = %u, fxtal = %u, osm = %u, fvco = %u, N(I) = %u, N(F) = %u",
 		frequency, srate, (unsigned int)g, (unsigned int)odiv,
 		(unsigned int)psd2, state->reference,
 		ptr->reg, fvco, nint, nfrac);
-	regs[STB6100_NI] = nint;
-	regs[STB6100_NF_LSB] = nfrac;
-	regs[STB6100_K] = (regs[STB6100_K] & ~STB6100_K_NF_MSB) | ((nfrac >> 8) & STB6100_K_NF_MSB);
-	regs[STB6100_VCO] |= STB6100_VCO_OSCH;		/* VCO search enabled		*/
-	regs[STB6100_VCO] |= STB6100_VCO_OCK;		/* VCO search clock off		*/
-	regs[STB6100_FCCK] |= STB6100_FCCK_FCCK;	/* LPF BW setting clock enabled	*/
-	regs[STB6100_LPEN] &= ~STB6100_LPEN_LPEN;	/* PLL loop disabled		*/
-	/* Power up. */
-	regs[STB6100_LPEN] |= STB6100_LPEN_SYNP	| STB6100_LPEN_OSCP | STB6100_LPEN_BEN;
 
-	msleep(2);
-	if ((rc = stb6100_write_regs(state, regs)) < 0)
+	/* Set up the test registers */
+	regs[STB6100_TEST1] = 0x8f;
+	rc = stb6100_write_reg(state, STB6100_TEST1, regs[STB6100_TEST1]);
+	if (rc < 0)
+		return rc;
+	regs[STB6100_TEST3] = 0xde;
+	rc = stb6100_write_reg(state, STB6100_TEST3, regs[STB6100_TEST3]);
+	if (rc < 0)
 		return rc;
 
-	msleep(2);
-	regs[STB6100_LPEN] |= STB6100_LPEN_LPEN;	/* PLL loop enabled		*/
-	if ((rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN])) < 0)
+	/* Bring up tuner according to LLA 3.7 3.4.1, step 2 */
+	regs[STB6100_LPEN] = 0xfb; /* PLL Loop enabled, bias on, VCO on, synth on */
+	rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN]);
+	if (rc < 0)
 		return rc;
 
+	msleep(2);
+
+	/* Bring up tuner according to LLA 3.7 3.4.1, step 3 */
 	regs[STB6100_VCO] &= ~STB6100_VCO_OCK;		/* VCO fast search		*/
-	if ((rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO])) < 0)
+	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
+	if (rc < 0)
 		return rc;
 
-	msleep(10);					/* wait for LO to lock		*/
+	msleep(10);  /*  This is dangerous as another (related) thread may start */ /* wait for LO to lock */
+
 	regs[STB6100_VCO] &= ~STB6100_VCO_OSCH;		/* vco search disabled		*/
 	regs[STB6100_VCO] |= STB6100_VCO_OCK;		/* search clock off		*/
-	if ((rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO])) < 0)
-		return rc;
-	regs[STB6100_FCCK] &= ~STB6100_FCCK_FCCK;       /* LPF BW clock disabled	*/
-	stb6100_normalise_regs(regs);
-	if ((rc = stb6100_write_reg_range(state, &regs[1], 1, STB6100_NUMREGS - 3)) < 0)
+	rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO]);
+	if (rc < 0)
 		return rc;
 
-	msleep(100);
+	rc = stb6100_write_reg(state, STB6100_FCCK, 0x0d);
+	if (rc < 0)
+		return rc;  /* Stop LPF calibration */
 
+	msleep(10);  /*  This is dangerous as another (related) thread may start */
+		     /* wait for stabilisation, (should not be necessary)		*/
 	return 0;
 }
 
@@ -433,8 +497,8 @@ static int stb6100_init(struct dvb_frontend *fe)
 	state->bandwidth	= status->bandwidth * 1000;	/* Hz	*/
 	state->reference	= status->refclock / 1000;	/* kHz	*/
 
-	/* Set default bandwidth.	*/
-	return stb6100_set_bandwidth(fe, state->bandwidth);
+	/* Set default bandwidth. Modified, PN 13-May-10	*/
+	return 0;
 }
 
 static int stb6100_get_state(struct dvb_frontend *fe,
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 425e7a43ae1..4e0fc2c8a41 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -1483,8 +1483,8 @@ static int stv090x_start_search(struct stv090x_state *state)
 		if (STV090x_WRITE_DEMOD(state, FFECFG, 0x41) < 0)
 			goto err;
 
-		if ((state->search_mode == STV090x_DVBS1)	||
-			(state->search_mode == STV090x_DSS)	||
+		if ((state->search_mode == STV090x_SEARCH_DVBS1)	||
+			(state->search_mode == STV090x_SEARCH_DSS)	||
 			(state->search_mode == STV090x_SEARCH_AUTO)) {
 
 			if (STV090x_WRITE_DEMOD(state, VITSCALE, 0x82) < 0)
@@ -2940,7 +2940,7 @@ static int stv090x_optimize_track(struct stv090x_state *state)
 		STV090x_WRITE_DEMOD(state, ERRCTRL1, 0x67); /* PER */
 		break;
 
-	case STV090x_UNKNOWN:
+	case STV090x_ERROR:
 	default:
 		reg = STV090x_READ_DEMOD(state, DMDCFGMD);
 		STV090x_SETFIELD_Px(reg, DVBS1_ENABLE_FIELD, 1);
diff --git a/drivers/media/dvb/mantis/Kconfig b/drivers/media/dvb/mantis/Kconfig
index fd0830ed10d..a13a5050313 100644
--- a/drivers/media/dvb/mantis/Kconfig
+++ b/drivers/media/dvb/mantis/Kconfig
@@ -1,6 +1,6 @@
 config MANTIS_CORE
 	tristate "Mantis/Hopper PCI bridge based devices"
-	depends on PCI && I2C && INPUT && IR_CORE
+	depends on PCI && I2C && INPUT && RC_CORE
 
 	help
 	  Support for PCI cards based on the Mantis and Hopper PCi bridge.
diff --git a/drivers/media/dvb/mantis/hopper_cards.c b/drivers/media/dvb/mantis/hopper_cards.c
index 09e9fc78518..70e73afefb3 100644
--- a/drivers/media/dvb/mantis/hopper_cards.c
+++ b/drivers/media/dvb/mantis/hopper_cards.c
@@ -251,6 +251,8 @@ static struct pci_device_id hopper_pci_table[] = {
 	{ }
 };
 
+MODULE_DEVICE_TABLE(pci, hopper_pci_table);
+
 static struct pci_driver hopper_pci_driver = {
 	.name		= DRIVER_NAME,
 	.id_table	= hopper_pci_table,
diff --git a/drivers/media/dvb/mantis/hopper_vp3028.c b/drivers/media/dvb/mantis/hopper_vp3028.c
index 96674c78e86..68a29f8bdf7 100644
--- a/drivers/media/dvb/mantis/hopper_vp3028.c
+++ b/drivers/media/dvb/mantis/hopper_vp3028.c
@@ -47,17 +47,17 @@ static int vp3028_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	struct mantis_hwconfig *config	= mantis->hwconfig;
 	int err = 0;
 
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
 	err = mantis_frontend_power(mantis, POWER_ON);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 
 	err = mantis_frontend_power(mantis, POWER_ON);
 	if (err == 0) {
 		msleep(250);
 		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
-		fe = zl10353_attach(&hopper_vp3028_config, adapter);
+		fe = dvb_attach(zl10353_attach, &hopper_vp3028_config, adapter);
 
 		if (!fe)
 			return -1;
diff --git a/drivers/media/dvb/mantis/mantis_cards.c b/drivers/media/dvb/mantis/mantis_cards.c
index cf4b39ffdaa..40da225098c 100644
--- a/drivers/media/dvb/mantis/mantis_cards.c
+++ b/drivers/media/dvb/mantis/mantis_cards.c
@@ -281,6 +281,8 @@ static struct pci_device_id mantis_pci_table[] = {
 	{ }
 };
 
+MODULE_DEVICE_TABLE(pci, mantis_pci_table);
+
 static struct pci_driver mantis_pci_driver = {
 	.name		= DRIVER_NAME,
 	.id_table	= mantis_pci_table,
diff --git a/drivers/media/dvb/mantis/mantis_common.h b/drivers/media/dvb/mantis/mantis_common.h
index d0b645a483c..bd400d21b81 100644
--- a/drivers/media/dvb/mantis/mantis_common.h
+++ b/drivers/media/dvb/mantis/mantis_common.h
@@ -171,7 +171,9 @@ struct mantis_pci {
 	struct work_struct	uart_work;
 	spinlock_t		uart_lock;
 
-	struct input_dev	*rc;
+	struct rc_dev		*rc;
+	char			input_name[80];
+	char			input_phys[80];
 };
 
 #define MANTIS_HIF_STATUS	(mantis->gpio_status)
diff --git a/drivers/media/dvb/mantis/mantis_dvb.c b/drivers/media/dvb/mantis/mantis_dvb.c
index 99d82eec3b0..e5180e45d31 100644
--- a/drivers/media/dvb/mantis/mantis_dvb.c
+++ b/drivers/media/dvb/mantis/mantis_dvb.c
@@ -47,15 +47,15 @@ int mantis_frontend_power(struct mantis_pci *mantis, enum mantis_power power)
 	switch (power) {
 	case POWER_ON:
 		dprintk(MANTIS_DEBUG, 1, "Power ON");
-		gpio_set_bits(mantis, config->power, POWER_ON);
+		mantis_gpio_set_bits(mantis, config->power, POWER_ON);
 		msleep(100);
-		gpio_set_bits(mantis, config->power, POWER_ON);
+		mantis_gpio_set_bits(mantis, config->power, POWER_ON);
 		msleep(100);
 		break;
 
 	case POWER_OFF:
 		dprintk(MANTIS_DEBUG, 1, "Power OFF");
-		gpio_set_bits(mantis, config->power, POWER_OFF);
+		mantis_gpio_set_bits(mantis, config->power, POWER_OFF);
 		msleep(100);
 		break;
 
@@ -73,13 +73,13 @@ void mantis_frontend_soft_reset(struct mantis_pci *mantis)
 	struct mantis_hwconfig *config = mantis->hwconfig;
 
 	dprintk(MANTIS_DEBUG, 1, "Frontend RESET");
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 	msleep(100);
 
 	return;
@@ -117,6 +117,7 @@ static int mantis_dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
 	if (mantis->feeds == 1)	 {
 		dprintk(MANTIS_DEBUG, 1, "mantis start feed & dma");
 		mantis_dma_start(mantis);
+		tasklet_enable(&mantis->tasklet);
 	}
 
 	return mantis->feeds;
@@ -136,6 +137,7 @@ static int mantis_dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
 	mantis->feeds--;
 	if (mantis->feeds == 0) {
 		dprintk(MANTIS_DEBUG, 1, "mantis stop feed and dma");
+		tasklet_disable(&mantis->tasklet);
 		mantis_dma_stop(mantis);
 	}
 
@@ -216,6 +218,7 @@ int __devinit mantis_dvb_init(struct mantis_pci *mantis)
 
 	dvb_net_init(&mantis->dvb_adapter, &mantis->dvbnet, &mantis->demux.dmx);
 	tasklet_init(&mantis->tasklet, mantis_dma_xfer, (unsigned long) mantis);
+	tasklet_disable(&mantis->tasklet);
 	if (mantis->hwconfig) {
 		result = config->frontend_init(mantis, mantis->fe);
 		if (result < 0) {
diff --git a/drivers/media/dvb/mantis/mantis_evm.c b/drivers/media/dvb/mantis/mantis_evm.c
index a7b369a439d..9f73c2cfc9e 100644
--- a/drivers/media/dvb/mantis/mantis_evm.c
+++ b/drivers/media/dvb/mantis/mantis_evm.c
@@ -111,7 +111,7 @@ void mantis_evmgr_exit(struct mantis_ca *ca)
 	struct mantis_pci *mantis = ca->ca_priv;
 
 	dprintk(MANTIS_DEBUG, 1, "Mantis Host I/F Event manager exiting");
-	flush_scheduled_work();
+	flush_work_sync(&ca->hif_evm_work);
 	mantis_hif_exit(ca);
 	mantis_pcmcia_exit(ca);
 }
diff --git a/drivers/media/dvb/mantis/mantis_input.c b/drivers/media/dvb/mantis/mantis_input.c
index a99489b8418..db6d54d3fec 100644
--- a/drivers/media/dvb/mantis/mantis_input.c
+++ b/drivers/media/dvb/mantis/mantis_input.c
@@ -18,8 +18,7 @@
 	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
 
-#include <linux/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <linux/pci.h>
 
 #include "dmxdev.h"
@@ -33,8 +32,9 @@
 #include "mantis_uart.h"
 
 #define MODULE_NAME "mantis_core"
+#define RC_MAP_MANTIS "rc-mantis"
 
-static struct ir_scancode mantis_ir_table[] = {
+static struct rc_map_table mantis_ir_table[] = {
 	{ 0x29, KEY_POWER	},
 	{ 0x28, KEY_FAVORITES	},
 	{ 0x30, KEY_TEXT	},
@@ -95,53 +95,65 @@ static struct ir_scancode mantis_ir_table[] = {
 	{ 0x00, KEY_BLUE	},
 };
 
-struct ir_scancode_table ir_mantis = {
-	.scan = mantis_ir_table,
-	.size = ARRAY_SIZE(mantis_ir_table),
+static struct rc_map_list ir_mantis_map = {
+	.map = {
+		.scan = mantis_ir_table,
+		.size = ARRAY_SIZE(mantis_ir_table),
+		.rc_type = RC_TYPE_UNKNOWN,
+		.name = RC_MAP_MANTIS,
+	}
 };
-EXPORT_SYMBOL_GPL(ir_mantis);
 
 int mantis_input_init(struct mantis_pci *mantis)
 {
-	struct input_dev *rc;
-	char name[80], dev[80];
+	struct rc_dev *dev;
 	int err;
 
-	rc = input_allocate_device();
-	if (!rc) {
-		dprintk(MANTIS_ERROR, 1, "Input device allocate failed");
-		return -ENOMEM;
-	}
+	err = rc_map_register(&ir_mantis_map);
+	if (err)
+		goto out;
 
-	sprintf(name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
-	sprintf(dev, "pci-%s/ir0", pci_name(mantis->pdev));
+	dev = rc_allocate_device();
+	if (!dev) {
+		dprintk(MANTIS_ERROR, 1, "Remote device allocation failed");
+		err = -ENOMEM;
+		goto out_map;
+	}
 
-	rc->name = name;
-	rc->phys = dev;
+	sprintf(mantis->input_name, "Mantis %s IR receiver", mantis->hwconfig->model_name);
+	sprintf(mantis->input_phys, "pci-%s/ir0", pci_name(mantis->pdev));
 
-	rc->id.bustype	= BUS_PCI;
-	rc->id.vendor	= mantis->vendor_id;
-	rc->id.product	= mantis->device_id;
-	rc->id.version	= 1;
-	rc->dev		= mantis->pdev->dev;
+	dev->input_name         = mantis->input_name;
+	dev->input_phys         = mantis->input_phys;
+	dev->input_id.bustype   = BUS_PCI;
+	dev->input_id.vendor    = mantis->vendor_id;
+	dev->input_id.product   = mantis->device_id;
+	dev->input_id.version   = 1;
+	dev->driver_name        = MODULE_NAME;
+	dev->map_name           = RC_MAP_MANTIS;
+	dev->dev.parent         = &mantis->pdev->dev;
 
-	err = __ir_input_register(rc, &ir_mantis, NULL, MODULE_NAME);
+	err = rc_register_device(dev);
 	if (err) {
 		dprintk(MANTIS_ERROR, 1, "IR device registration failed, ret = %d", err);
-		input_free_device(rc);
-		return -ENODEV;
+		goto out_dev;
 	}
 
-	mantis->rc = rc;
-
+	mantis->rc = dev;
 	return 0;
+
+out_dev:
+	rc_free_device(dev);
+out_map:
+	rc_map_unregister(&ir_mantis_map);
+out:
+	return err;
 }
 
 int mantis_exit(struct mantis_pci *mantis)
 {
-	struct input_dev *rc = mantis->rc;
-
-	ir_input_unregister(rc);
-
+	rc_unregister_device(mantis->rc);
+	rc_map_unregister(&ir_mantis_map);
 	return 0;
 }
+
diff --git a/drivers/media/dvb/mantis/mantis_ioc.c b/drivers/media/dvb/mantis/mantis_ioc.c
index fe31cfb0b15..479086dbb9a 100644
--- a/drivers/media/dvb/mantis/mantis_ioc.c
+++ b/drivers/media/dvb/mantis/mantis_ioc.c
@@ -75,7 +75,7 @@ int mantis_get_mac(struct mantis_pci *mantis)
 EXPORT_SYMBOL_GPL(mantis_get_mac);
 
 /* Turn the given bit on or off. */
-void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
+void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
 {
 	u32 cur;
 
@@ -90,7 +90,7 @@ void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
 	mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
 	mmwrite(0x00, MANTIS_GPIF_DOUT);
 }
-EXPORT_SYMBOL_GPL(gpio_set_bits);
+EXPORT_SYMBOL_GPL(mantis_gpio_set_bits);
 
 int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl)
 {
diff --git a/drivers/media/dvb/mantis/mantis_ioc.h b/drivers/media/dvb/mantis/mantis_ioc.h
index 188fe5a8161..d56e002b295 100644
--- a/drivers/media/dvb/mantis/mantis_ioc.h
+++ b/drivers/media/dvb/mantis/mantis_ioc.h
@@ -44,7 +44,7 @@ enum mantis_stream_control {
 };
 
 extern int mantis_get_mac(struct mantis_pci *mantis);
-extern void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
+extern void mantis_gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value);
 
 extern int mantis_stream_control(struct mantis_pci *mantis, enum mantis_stream_control stream_ctl);
 
diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c
index 7d2f2398fa8..97b889e8a34 100644
--- a/drivers/media/dvb/mantis/mantis_uart.c
+++ b/drivers/media/dvb/mantis/mantis_uart.c
@@ -182,5 +182,6 @@ void mantis_uart_exit(struct mantis_pci *mantis)
 {
 	/* disable interrupt */
 	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
+	flush_work_sync(&mantis->uart_work);
 }
 EXPORT_SYMBOL_GPL(mantis_uart_exit);
diff --git a/drivers/media/dvb/mantis/mantis_vp1033.c b/drivers/media/dvb/mantis/mantis_vp1033.c
index 4a723bda003..deec927c7f7 100644
--- a/drivers/media/dvb/mantis/mantis_vp1033.c
+++ b/drivers/media/dvb/mantis/mantis_vp1033.c
@@ -173,7 +173,7 @@ static int vp1033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 		msleep(250);
 
 		dprintk(MANTIS_ERROR, 1, "Probing for STV0299 (DVB-S)");
-		fe = stv0299_attach(&lgtdqcs001f_config, adapter);
+		fe = dvb_attach(stv0299_attach, &lgtdqcs001f_config, adapter);
 
 		if (fe) {
 			fe->ops.tuner_ops.set_params = lgtdqcs001f_tuner_set;
diff --git a/drivers/media/dvb/mantis/mantis_vp1034.c b/drivers/media/dvb/mantis/mantis_vp1034.c
index 8e6ae558ee5..26bc0cbe84d 100644
--- a/drivers/media/dvb/mantis/mantis_vp1034.c
+++ b/drivers/media/dvb/mantis/mantis_vp1034.c
@@ -50,13 +50,13 @@ int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 	switch (voltage) {
 	case SEC_VOLTAGE_13:
 		dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
-		gpio_set_bits(mantis, 13, 1);
-		gpio_set_bits(mantis, 14, 0);
+		mantis_gpio_set_bits(mantis, 13, 1);
+		mantis_gpio_set_bits(mantis, 14, 0);
 		break;
 	case SEC_VOLTAGE_18:
 		dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
-		gpio_set_bits(mantis, 13, 1);
-		gpio_set_bits(mantis, 14, 1);
+		mantis_gpio_set_bits(mantis, 13, 1);
+		mantis_gpio_set_bits(mantis, 14, 1);
 		break;
 	case SEC_VOLTAGE_OFF:
 		dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
@@ -82,7 +82,7 @@ static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 		msleep(250);
 
 		dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
-		fe = mb86a16_attach(&vp1034_mb86a16_config, adapter);
+		fe = dvb_attach(mb86a16_attach, &vp1034_mb86a16_config, adapter);
 		if (fe) {
 			dprintk(MANTIS_ERROR, 1,
 			"found MB86A16 DVB-S/DSS frontend @0x%02x",
diff --git a/drivers/media/dvb/mantis/mantis_vp1041.c b/drivers/media/dvb/mantis/mantis_vp1041.c
index d1aa2bc0c15..38a436ca2fd 100644
--- a/drivers/media/dvb/mantis/mantis_vp1041.c
+++ b/drivers/media/dvb/mantis/mantis_vp1041.c
@@ -316,14 +316,14 @@ static int vp1041_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	if (err == 0) {
 		mantis_frontend_soft_reset(mantis);
 		msleep(250);
-		mantis->fe = stb0899_attach(&vp1041_stb0899_config, adapter);
+		mantis->fe = dvb_attach(stb0899_attach, &vp1041_stb0899_config, adapter);
 		if (mantis->fe) {
 			dprintk(MANTIS_ERROR, 1,
 				"found STB0899 DVB-S/DVB-S2 frontend @0x%02x",
 				vp1041_stb0899_config.demod_address);
 
-			if (stb6100_attach(mantis->fe, &vp1041_stb6100_config, adapter)) {
-				if (!lnbp21_attach(mantis->fe, adapter, 0, 0))
+			if (dvb_attach(stb6100_attach, mantis->fe, &vp1041_stb6100_config, adapter)) {
+				if (!dvb_attach(lnbp21_attach, mantis->fe, adapter, 0, 0))
 					dprintk(MANTIS_ERROR, 1, "No LNBP21 found!");
 			}
 		} else {
diff --git a/drivers/media/dvb/mantis/mantis_vp2033.c b/drivers/media/dvb/mantis/mantis_vp2033.c
index 10ce81790a8..06da0ddf05a 100644
--- a/drivers/media/dvb/mantis/mantis_vp2033.c
+++ b/drivers/media/dvb/mantis/mantis_vp2033.c
@@ -132,7 +132,7 @@ static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 		msleep(250);
 
 		dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
-		fe = tda10021_attach(&vp2033_tda1002x_cu1216_config,
+		fe = dvb_attach(tda10021_attach, &vp2033_tda1002x_cu1216_config,
 				     adapter,
 				     read_pwm(mantis));
 
@@ -141,7 +141,7 @@ static int vp2033_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 				"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
 				vp2033_tda1002x_cu1216_config.demod_address);
 		} else {
-			fe = tda10023_attach(&vp2033_tda10023_cu1216_config,
+			fe = dvb_attach(tda10023_attach, &vp2033_tda10023_cu1216_config,
 					     adapter,
 					     read_pwm(mantis));
 
diff --git a/drivers/media/dvb/mantis/mantis_vp2040.c b/drivers/media/dvb/mantis/mantis_vp2040.c
index a7ca233e800..f72b137b765 100644
--- a/drivers/media/dvb/mantis/mantis_vp2040.c
+++ b/drivers/media/dvb/mantis/mantis_vp2040.c
@@ -132,7 +132,7 @@ static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 		msleep(250);
 
 		dprintk(MANTIS_ERROR, 1, "Probing for CU1216 (DVB-C)");
-		fe = tda10021_attach(&vp2040_tda1002x_cu1216_config,
+		fe = dvb_attach(tda10021_attach, &vp2040_tda1002x_cu1216_config,
 				     adapter,
 				     read_pwm(mantis));
 
@@ -141,7 +141,7 @@ static int vp2040_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 				"found Philips CU1216 DVB-C frontend (TDA10021) @ 0x%02x",
 				vp2040_tda1002x_cu1216_config.demod_address);
 		} else {
-			fe = tda10023_attach(&vp2040_tda10023_cu1216_config,
+			fe = dvb_attach(tda10023_attach, &vp2040_tda10023_cu1216_config,
 					     adapter,
 					     read_pwm(mantis));
 
diff --git a/drivers/media/dvb/mantis/mantis_vp3030.c b/drivers/media/dvb/mantis/mantis_vp3030.c
index 1f433421495..c09308cd3ac 100644
--- a/drivers/media/dvb/mantis/mantis_vp3030.c
+++ b/drivers/media/dvb/mantis/mantis_vp3030.c
@@ -59,21 +59,21 @@ static int vp3030_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *
 	struct mantis_hwconfig *config	= mantis->hwconfig;
 	int err = 0;
 
-	gpio_set_bits(mantis, config->reset, 0);
+	mantis_gpio_set_bits(mantis, config->reset, 0);
 	msleep(100);
 	err = mantis_frontend_power(mantis, POWER_ON);
 	msleep(100);
-	gpio_set_bits(mantis, config->reset, 1);
+	mantis_gpio_set_bits(mantis, config->reset, 1);
 
 	if (err == 0) {
 		msleep(250);
 		dprintk(MANTIS_ERROR, 1, "Probing for 10353 (DVB-T)");
-		fe = zl10353_attach(&mantis_vp3030_config, adapter);
+		fe = dvb_attach(zl10353_attach, &mantis_vp3030_config, adapter);
 
 		if (!fe)
 			return -1;
 
-		tda665x_attach(fe, &env57h12d5_config, adapter);
+		dvb_attach(tda665x_attach, fe, &env57h12d5_config, adapter);
 	} else {
 		dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
 			adapter->name,
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index 4caeb163a66..dc073bdc623 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -34,7 +34,6 @@
 #include <linux/io.h>
 #include <asm/div64.h>
 #include <linux/pci.h>
-#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <linux/byteorder/generic.h>
 #include <linux/firmware.h>
@@ -1305,7 +1304,6 @@ static void ngene_stop(struct ngene *dev)
 static int ngene_start(struct ngene *dev)
 {
 	int stat;
-	unsigned long flags;
 	int i;
 
 	pci_set_master(dev->pci_dev);
@@ -1338,6 +1336,8 @@ static int ngene_start(struct ngene *dev)
 #ifdef CONFIG_PCI_MSI
 	/* enable MSI if kernel and card support it */
 	if (pci_msi_enabled() && dev->card_info->msi_supported) {
+		unsigned long flags;
+
 		ngwritel(0, NGENE_INT_ENABLE);
 		free_irq(dev->pci_dev->irq, dev);
 		stat = pci_enable_msi(dev->pci_dev);
@@ -1516,7 +1516,7 @@ static int init_channels(struct ngene *dev)
 
 void __devexit ngene_remove(struct pci_dev *pdev)
 {
-	struct ngene *dev = (struct ngene *)pci_get_drvdata(pdev);
+	struct ngene *dev = pci_get_drvdata(pdev);
 	int i;
 
 	tasklet_kill(&dev->event_tasklet);
@@ -1537,12 +1537,11 @@ int __devinit ngene_probe(struct pci_dev *pci_dev,
 	if (pci_enable_device(pci_dev) < 0)
 		return -ENODEV;
 
-	dev = vmalloc(sizeof(struct ngene));
+	dev = vzalloc(sizeof(struct ngene));
 	if (dev == NULL) {
 		stat = -ENOMEM;
 		goto fail0;
 	}
-	memset(dev, 0, sizeof(struct ngene));
 
 	dev->pci_dev = pci_dev;
 	dev->card_info = (struct ngene_info *)id->driver_data;
diff --git a/drivers/media/dvb/ngene/ngene-dvb.c b/drivers/media/dvb/ngene/ngene-dvb.c
index 48f980b21d6..3832e5983c1 100644
--- a/drivers/media/dvb/ngene/ngene-dvb.c
+++ b/drivers/media/dvb/ngene/ngene-dvb.c
@@ -35,7 +35,6 @@
 #include <linux/io.h>
 #include <asm/div64.h>
 #include <linux/pci.h>
-#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <linux/byteorder/generic.h>
 #include <linux/firmware.h>
diff --git a/drivers/media/dvb/ngene/ngene-i2c.c b/drivers/media/dvb/ngene/ngene-i2c.c
index c3ae956714e..d28554f8ce9 100644
--- a/drivers/media/dvb/ngene/ngene-i2c.c
+++ b/drivers/media/dvb/ngene/ngene-i2c.c
@@ -37,7 +37,6 @@
 #include <asm/div64.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
-#include <linux/smp_lock.h>
 #include <linux/timer.h>
 #include <linux/byteorder/generic.h>
 #include <linux/firmware.h>
diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig
index e520bceee0a..bc6456eb2c4 100644
--- a/drivers/media/dvb/siano/Kconfig
+++ b/drivers/media/dvb/siano/Kconfig
@@ -4,7 +4,7 @@
 
 config SMS_SIANO_MDTV
 	tristate "Siano SMS1xxx based MDTV receiver"
-	depends on DVB_CORE && IR_CORE && HAS_DMA
+	depends on DVB_CORE && RC_CORE && HAS_DMA
 	---help---
 	  Choose Y or M here if you have MDTV receiver with a Siano chipset.
 
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index 135e45bd00c..78765ed2806 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -438,7 +438,7 @@ static int smscore_init_ir(struct smscore_device_t *coredev)
 	int rc;
 	void *buffer;
 
-	coredev->ir.input_dev = NULL;
+	coredev->ir.dev = NULL;
 	ir_io = sms_get_board(smscore_get_board_id(coredev))->board_cfg.ir;
 	if (ir_io) {/* only if IR port exist we use IR sub-module */
 		sms_info("IR loading");
diff --git a/drivers/media/dvb/siano/smsir.c b/drivers/media/dvb/siano/smsir.c
index a27c44a8af5..37bc5c4b8ad 100644
--- a/drivers/media/dvb/siano/smsir.c
+++ b/drivers/media/dvb/siano/smsir.c
@@ -45,25 +45,24 @@ void sms_ir_event(struct smscore_device_t *coredev, const char *buf, int len)
 		ev.duration = abs(samples[i]) * 1000; /* Convert to ns */
 		ev.pulse = (samples[i] > 0) ? false : true;
 
-		ir_raw_event_store(coredev->ir.input_dev, &ev);
+		ir_raw_event_store(coredev->ir.dev, &ev);
 	}
-	ir_raw_event_handle(coredev->ir.input_dev);
+	ir_raw_event_handle(coredev->ir.dev);
 }
 
 int sms_ir_init(struct smscore_device_t *coredev)
 {
-	struct input_dev *input_dev;
+	int err;
 	int board_id = smscore_get_board_id(coredev);
+	struct rc_dev *dev;
 
-	sms_log("Allocating input device");
-	input_dev = input_allocate_device();
-	if (!input_dev)	{
+	sms_log("Allocating rc device");
+	dev = rc_allocate_device();
+	if (!dev) {
 		sms_err("Not enough memory");
 		return -ENOMEM;
 	}
 
-	coredev->ir.input_dev = input_dev;
-
 	coredev->ir.controller = 0;	/* Todo: vega/nova SPI number */
 	coredev->ir.timeout = IR_DEFAULT_TIMEOUT;
 	sms_log("IR port %d, timeout %d ms",
@@ -75,38 +74,41 @@ int sms_ir_init(struct smscore_device_t *coredev)
 	strlcpy(coredev->ir.phys, coredev->devpath, sizeof(coredev->ir.phys));
 	strlcat(coredev->ir.phys, "/ir0", sizeof(coredev->ir.phys));
 
-	input_dev->name = coredev->ir.name;
-	input_dev->phys = coredev->ir.phys;
-	input_dev->dev.parent = coredev->device;
+	dev->input_name = coredev->ir.name;
+	dev->input_phys = coredev->ir.phys;
+	dev->dev.parent = coredev->device;
 
 #if 0
 	/* TODO: properly initialize the parameters bellow */
-	input_dev->id.bustype = BUS_USB;
-	input_dev->id.version = 1;
-	input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
-	input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+	dev->input_id.bustype = BUS_USB;
+	dev->input_id.version = 1;
+	dev->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	dev->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
 #endif
 
-	coredev->ir.props.priv = coredev;
-	coredev->ir.props.driver_type = RC_DRIVER_IR_RAW;
-	coredev->ir.props.allowed_protos = IR_TYPE_ALL;
+	dev->priv = coredev;
+	dev->driver_type = RC_DRIVER_IR_RAW;
+	dev->allowed_protos = RC_TYPE_ALL;
+	dev->map_name = sms_get_board(board_id)->rc_codes;
+	dev->driver_name = MODULE_NAME;
 
-	sms_log("Input device (IR) %s is set for key events", input_dev->name);
+	sms_log("Input device (IR) %s is set for key events", dev->input_name);
 
-	if (ir_input_register(input_dev, sms_get_board(board_id)->rc_codes,
-			      &coredev->ir.props, MODULE_NAME)) {
+	err = rc_register_device(dev);
+	if (err < 0) {
 		sms_err("Failed to register device");
-		input_free_device(input_dev);
-		return -EACCES;
+		rc_free_device(dev);
+		return err;
 	}
 
+	coredev->ir.dev = dev;
 	return 0;
 }
 
 void sms_ir_exit(struct smscore_device_t *coredev)
 {
-	if (coredev->ir.input_dev)
-		ir_input_unregister(coredev->ir.input_dev);
+	if (coredev->ir.dev)
+		rc_unregister_device(coredev->ir.dev);
 
 	sms_log("");
 }
diff --git a/drivers/media/dvb/siano/smsir.h b/drivers/media/dvb/siano/smsir.h
index 926e247523b..ae92b3a8587 100644
--- a/drivers/media/dvb/siano/smsir.h
+++ b/drivers/media/dvb/siano/smsir.h
@@ -28,20 +28,19 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define __SMS_IR_H__
 
 #include <linux/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #define IR_DEFAULT_TIMEOUT		100
 
 struct smscore_device_t;
 
 struct ir_t {
-	struct input_dev *input_dev;
+	struct rc_dev *dev;
 	char name[40];
 	char phys[32];
 
 	char *rc_codes;
 	u64 protocol;
-	struct ir_dev_props props;
 
 	u32 timeout;
 	u32 controller;
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index 50d4338610e..0b8da57cf4c 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -288,8 +288,7 @@ static int smsusb1_setmode(void *context, int mode)
 
 static void smsusb_term_device(struct usb_interface *intf)
 {
-	struct smsusb_device_t *dev =
-		(struct smsusb_device_t *) usb_get_intfdata(intf);
+	struct smsusb_device_t *dev = usb_get_intfdata(intf);
 
 	if (dev) {
 		smsusb_stop_streaming(dev);
@@ -445,8 +444,7 @@ static void smsusb_disconnect(struct usb_interface *intf)
 
 static int smsusb_suspend(struct usb_interface *intf, pm_message_t msg)
 {
-	struct smsusb_device_t *dev =
-		(struct smsusb_device_t *)usb_get_intfdata(intf);
+	struct smsusb_device_t *dev = usb_get_intfdata(intf);
 	printk(KERN_INFO "%s: Entering status %d.\n", __func__, msg.event);
 	smsusb_stop_streaming(dev);
 	return 0;
@@ -455,8 +453,7 @@ static int smsusb_suspend(struct usb_interface *intf, pm_message_t msg)
 static int smsusb_resume(struct usb_interface *intf)
 {
 	int rc, i;
-	struct smsusb_device_t *dev =
-		(struct smsusb_device_t *)usb_get_intfdata(intf);
+	struct smsusb_device_t *dev = usb_get_intfdata(intf);
 	struct usb_device *udev = interface_to_usbdev(intf);
 
 	printk(KERN_INFO "%s: Entering.\n", __func__);
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index debea8d1d31..44afab2fdc2 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -89,7 +89,6 @@ config DVB_BUDGET
 config DVB_BUDGET_CI
 	tristate "Budget cards with onboard CI connector"
 	depends on DVB_BUDGET_CORE && I2C
-	depends on INPUT # due to IR
 	select DVB_STV0297 if !DVB_FE_CUSTOMISE
 	select DVB_STV0299 if !DVB_FE_CUSTOMISE
 	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
@@ -98,7 +97,7 @@ config DVB_BUDGET_CI
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_TDA827X if !MEDIA_TUNER_CUSTOMISE
-	depends on VIDEO_IR
+	depends on RC_CORE
 	help
 	  Support for simple SAA7146 based DVB cards
 	  (so called Budget- or Nova-PCI cards) without onboard
diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c
index ac20c5bbfa4..cdd31cae46c 100644
--- a/drivers/media/dvb/ttpci/av7110_v4l.c
+++ b/drivers/media/dvb/ttpci/av7110_v4l.c
@@ -100,6 +100,7 @@ static struct v4l2_input inputs[4] = {
 		.tuner		= 0, /* ignored */
 		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
 		.status		= 0,
+		.capabilities	= V4L2_IN_CAP_STD,
 	}, {
 		.index		= 1,
 		.name		= "Television",
@@ -108,6 +109,7 @@ static struct v4l2_input inputs[4] = {
 		.tuner		= 0,
 		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
 		.status		= 0,
+		.capabilities	= V4L2_IN_CAP_STD,
 	}, {
 		.index		= 2,
 		.name		= "Video",
@@ -116,6 +118,7 @@ static struct v4l2_input inputs[4] = {
 		.tuner		= 0,
 		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
 		.status		= 0,
+		.capabilities	= V4L2_IN_CAP_STD,
 	}, {
 		.index		= 3,
 		.name		= "Y/C",
@@ -124,6 +127,7 @@ static struct v4l2_input inputs[4] = {
 		.tuner		= 0,
 		.std		= V4L2_STD_PAL_BG|V4L2_STD_NTSC_M,
 		.status		= 0,
+		.capabilities	= V4L2_IN_CAP_STD,
 	}
 };
 
diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c
index 97afc01f60d..e957d7690bc 100644
--- a/drivers/media/dvb/ttpci/budget-av.c
+++ b/drivers/media/dvb/ttpci/budget-av.c
@@ -1406,8 +1406,10 @@ static int budget_av_detach(struct saa7146_dev *dev)
 
 #define KNC1_INPUTS 2
 static struct v4l2_input knc1_inputs[KNC1_INPUTS] = {
-	{0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
-	{1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0, V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0},
+	{ 0, "Composite", V4L2_INPUT_TYPE_TUNER, 1, 0,
+		V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 1, "S-Video", V4L2_INPUT_TYPE_CAMERA, 2, 0,
+		V4L2_STD_PAL_BG | V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
 };
 
 static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i)
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c
index a9c2c326df4..b82756db5bd 100644
--- a/drivers/media/dvb/ttpci/budget-ci.c
+++ b/drivers/media/dvb/ttpci/budget-ci.c
@@ -33,9 +33,8 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
-#include <linux/input.h>
 #include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "budget.h"
 
@@ -96,7 +95,7 @@ MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 struct budget_ci_ir {
-	struct input_dev *dev;
+	struct rc_dev *dev;
 	struct tasklet_struct msp430_irq_tasklet;
 	char name[72]; /* 40 + 32 for (struct saa7146_dev).name */
 	char phys[32];
@@ -118,7 +117,7 @@ struct budget_ci {
 static void msp430_ir_interrupt(unsigned long data)
 {
 	struct budget_ci *budget_ci = (struct budget_ci *) data;
-	struct input_dev *dev = budget_ci->ir.dev;
+	struct rc_dev *dev = budget_ci->ir.dev;
 	u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8;
 
 	/*
@@ -160,19 +159,17 @@ static void msp430_ir_interrupt(unsigned long data)
 	    budget_ci->ir.rc5_device != (command & 0x1f))
 		return;
 
-	ir_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0);
+	rc_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0);
 }
 
 static int msp430_ir_init(struct budget_ci *budget_ci)
 {
 	struct saa7146_dev *saa = budget_ci->budget.dev;
-	struct input_dev *input_dev = budget_ci->ir.dev;
+	struct rc_dev *dev;
 	int error;
-	char *ir_codes = NULL;
 
-
-	budget_ci->ir.dev = input_dev = input_allocate_device();
-	if (!input_dev) {
+	dev = rc_allocate_device();
+	if (!dev) {
 		printk(KERN_ERR "budget_ci: IR interface initialisation failed\n");
 		return -ENOMEM;
 	}
@@ -182,19 +179,20 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 	snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys),
 		 "pci-%s/ir0", pci_name(saa->pci));
 
-	input_dev->name = budget_ci->ir.name;
-
-	input_dev->phys = budget_ci->ir.phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	dev->driver_name = MODULE_NAME;
+	dev->input_name = budget_ci->ir.name;
+	dev->input_phys = budget_ci->ir.phys;
+	dev->input_id.bustype = BUS_PCI;
+	dev->input_id.version = 1;
+	dev->scanmask = 0xff;
 	if (saa->pci->subsystem_vendor) {
-		input_dev->id.vendor = saa->pci->subsystem_vendor;
-		input_dev->id.product = saa->pci->subsystem_device;
+		dev->input_id.vendor = saa->pci->subsystem_vendor;
+		dev->input_id.product = saa->pci->subsystem_device;
 	} else {
-		input_dev->id.vendor = saa->pci->vendor;
-		input_dev->id.product = saa->pci->device;
+		dev->input_id.vendor = saa->pci->vendor;
+		dev->input_id.product = saa->pci->device;
 	}
-	input_dev->dev.parent = &saa->pci->dev;
+	dev->dev.parent = &saa->pci->dev;
 
 	if (rc5_device < 0)
 		budget_ci->ir.rc5_device = IR_DEVICE_ANY;
@@ -208,7 +206,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 	case 0x1011:
 	case 0x1012:
 		/* The hauppauge keymap is a superset of these remotes */
-		ir_codes = RC_MAP_HAUPPAUGE_NEW;
+		dev->map_name = RC_MAP_HAUPPAUGE_NEW;
 
 		if (rc5_device < 0)
 			budget_ci->ir.rc5_device = 0x1f;
@@ -218,23 +216,22 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 	case 0x1019:
 	case 0x101a:
 		/* for the Technotrend 1500 bundled remote */
-		ir_codes = RC_MAP_TT_1500;
+		dev->map_name = RC_MAP_TT_1500;
 		break;
 	default:
 		/* unknown remote */
-		ir_codes = RC_MAP_BUDGET_CI_OLD;
+		dev->map_name = RC_MAP_BUDGET_CI_OLD;
 		break;
 	}
 
-	error = ir_input_register(input_dev, ir_codes, NULL, MODULE_NAME);
+	error = rc_register_device(dev);
 	if (error) {
 		printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error);
+		rc_free_device(dev);
 		return error;
 	}
 
-	/* note: these must be after input_register_device */
-	input_dev->rep[REP_DELAY] = 400;
-	input_dev->rep[REP_PERIOD] = 250;
+	budget_ci->ir.dev = dev;
 
 	tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt,
 		     (unsigned long) budget_ci);
@@ -248,13 +245,12 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
 static void msp430_ir_deinit(struct budget_ci *budget_ci)
 {
 	struct saa7146_dev *saa = budget_ci->budget.dev;
-	struct input_dev *dev = budget_ci->ir.dev;
 
 	SAA7146_IER_DISABLE(saa, MASK_06);
 	saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT);
 	tasklet_kill(&budget_ci->ir.msp430_irq_tasklet);
 
-	ir_input_unregister(dev);
+	rc_unregister_device(budget_ci->ir.dev);
 }
 
 static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address)
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index 83567b898d0..3c5a4739ed7 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -452,4 +452,20 @@ config RADIO_TIMBERDALE
 	  found behind the Timberdale FPGA on the Russellville board.
 	  Enabling this driver will automatically select the DSP and tuner.
 
+config RADIO_WL1273
+	tristate "Texas Instruments WL1273 I2C FM Radio"
+	depends on I2C && VIDEO_V4L2
+	select MFD_WL1273_CORE
+	select FW_LOADER
+	---help---
+	  Choose Y here if you have this FM radio chip.
+
+	  In order to control your radio card, you will need to use programs
+	  that are compatible with the Video For Linux 2 API.  Information on
+	  this API and pointers to "v4l2" programs may be found at
+	  <file:Documentation/video4linux/API.html>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called radio-wl1273.
+
 endif # RADIO_ADAPTERS
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index f615583b483..d2970748a69 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -26,5 +26,6 @@ obj-$(CONFIG_RADIO_TEA5764) += radio-tea5764.o
 obj-$(CONFIG_RADIO_SAA7706H) += saa7706h.o
 obj-$(CONFIG_RADIO_TEF6862) += tef6862.o
 obj-$(CONFIG_RADIO_TIMBERDALE) += radio-timb.o
+obj-$(CONFIG_RADIO_WL1273) += radio-wl1273.o
 
 EXTRA_CFLAGS += -Isound
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index 5bf4985daed..6cc5d130fbc 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -31,7 +31,6 @@
 #include <linux/module.h>	/* Modules 			*/
 #include <linux/init.h>		/* Initdata			*/
 #include <linux/ioport.h>	/* request_region		*/
-#include <linux/delay.h>	/* udelay			*/
 #include <linux/videodev2.h>	/* kernel radio structs		*/
 #include <linux/version.h>	/* for KERNEL_VERSION MACRO	*/
 #include <linux/io.h>		/* outb, outb_p			*/
@@ -71,27 +70,17 @@ static struct rtrack rtrack_card;
 
 /* local things */
 
-static void sleep_delay(long n)
-{
-	/* Sleep nicely for 'n' uS */
-	int d = n / msecs_to_jiffies(1000);
-	if (!d)
-		udelay(n);
-	else
-		msleep(jiffies_to_msecs(d));
-}
-
 static void rt_decvol(struct rtrack *rt)
 {
 	outb(0x58, rt->io);		/* volume down + sigstr + on	*/
-	sleep_delay(100000);
+	msleep(100);
 	outb(0xd8, rt->io);		/* volume steady + sigstr + on	*/
 }
 
 static void rt_incvol(struct rtrack *rt)
 {
 	outb(0x98, rt->io);		/* volume up + sigstr + on	*/
-	sleep_delay(100000);
+	msleep(100);
 	outb(0xd8, rt->io);		/* volume steady + sigstr + on	*/
 }
 
@@ -120,7 +109,7 @@ static int rt_setvol(struct rtrack *rt, int vol)
 
 	if (vol == 0) {			/* volume = 0 means mute the card */
 		outb(0x48, rt->io);	/* volume down but still "on"	*/
-		sleep_delay(2000000);	/* make sure it's totally down	*/
+		msleep(2000);	/* make sure it's totally down	*/
 		outb(0xd0, rt->io);	/* volume steady, off		*/
 		rt->curvol = 0;		/* track the volume state!	*/
 		mutex_unlock(&rt->lock);
@@ -155,7 +144,7 @@ static void send_0_byte(struct rtrack *rt)
 		outb_p(128+64+16+8+  1, rt->io);  /* on + wr-enable + data low */
 		outb_p(128+64+16+8+2+1, rt->io);  /* clock */
 	}
-	sleep_delay(1000);
+	msleep(1);
 }
 
 static void send_1_byte(struct rtrack *rt)
@@ -169,7 +158,7 @@ static void send_1_byte(struct rtrack *rt)
 		outb_p(128+64+16+8+4+2+1, rt->io); /* clock */
 	}
 
-	sleep_delay(1000);
+	msleep(1);
 }
 
 static int rt_setfreq(struct rtrack *rt, unsigned long freq)
@@ -361,7 +350,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations rtrack_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops rtrack_ioctl_ops = {
@@ -412,13 +401,6 @@ static int __init rtrack_init(void)
 	rt->vdev.release = video_device_release_empty;
 	video_set_drvdata(&rt->vdev, rt);
 
-	if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(&rt->v4l2_dev);
-		release_region(rt->io, 2);
-		return -EINVAL;
-	}
-	v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
-
 	/* Set up the I/O locking */
 
 	mutex_init(&rt->lock);
@@ -427,9 +409,16 @@ static int __init rtrack_init(void)
 
 	/* this ensures that the volume is all the way down  */
 	outb(0x48, rt->io);		/* volume down but still "on"	*/
-	sleep_delay(2000000);	/* make sure it's totally down	*/
+	msleep(2000);	/* make sure it's totally down	*/
 	outb(0xc0, rt->io);		/* steady volume, mute card	*/
 
+	if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_device_unregister(&rt->v4l2_dev);
+		release_region(rt->io, 2);
+		return -EINVAL;
+	}
+	v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
+
 	return 0;
 }
 
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
index c2231139362..dd8a6ab0d43 100644
--- a/drivers/media/radio/radio-aztech.c
+++ b/drivers/media/radio/radio-aztech.c
@@ -324,7 +324,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 
 static const struct v4l2_file_operations aztech_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops aztech_ioctl_ops = {
@@ -375,6 +375,8 @@ static int __init aztech_init(void)
 	az->vdev.ioctl_ops = &aztech_ioctl_ops;
 	az->vdev.release = video_device_release_empty;
 	video_set_drvdata(&az->vdev, az);
+	/* mute card - prevents noisy bootups */
+	outb(0, az->io);
 
 	if (video_register_device(&az->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(v4l2_dev);
@@ -383,8 +385,6 @@ static int __init aztech_init(void)
 	}
 
 	v4l2_info(v4l2_dev, "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n");
-	/* mute card - prevents noisy bootups */
-	outb(0, az->io);
 	return 0;
 }
 
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index b701ea6e7c7..bc9ad0897c5 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -328,11 +328,10 @@ static ssize_t cadet_read(struct file *file, char __user *data, size_t count, lo
 	unsigned char readbuf[RDS_BUFFER];
 	int i = 0;
 
+	mutex_lock(&dev->lock);
 	if (dev->rdsstat == 0) {
-		mutex_lock(&dev->lock);
 		dev->rdsstat = 1;
 		outb(0x80, dev->io);        /* Select RDS fifo */
-		mutex_unlock(&dev->lock);
 		init_timer(&dev->readtimer);
 		dev->readtimer.function = cadet_handler;
 		dev->readtimer.data = (unsigned long)dev;
@@ -340,12 +339,15 @@ static ssize_t cadet_read(struct file *file, char __user *data, size_t count, lo
 		add_timer(&dev->readtimer);
 	}
 	if (dev->rdsin == dev->rdsout) {
+		mutex_unlock(&dev->lock);
 		if (file->f_flags & O_NONBLOCK)
 			return -EWOULDBLOCK;
 		interruptible_sleep_on(&dev->read_queue);
+		mutex_lock(&dev->lock);
 	}
 	while (i < count && dev->rdsin != dev->rdsout)
 		readbuf[i++] = dev->rdsbuf[dev->rdsout++];
+	mutex_unlock(&dev->lock);
 
 	if (copy_to_user(data, readbuf, i))
 		return -EFAULT;
@@ -525,9 +527,11 @@ static int cadet_open(struct file *file)
 {
 	struct cadet *dev = video_drvdata(file);
 
+	mutex_lock(&dev->lock);
 	dev->users++;
 	if (1 == dev->users)
 		init_waitqueue_head(&dev->read_queue);
+	mutex_unlock(&dev->lock);
 	return 0;
 }
 
@@ -535,11 +539,13 @@ static int cadet_release(struct file *file)
 {
 	struct cadet *dev = video_drvdata(file);
 
+	mutex_lock(&dev->lock);
 	dev->users--;
 	if (0 == dev->users) {
 		del_timer_sync(&dev->readtimer);
 		dev->rdsstat = 0;
 	}
+	mutex_unlock(&dev->lock);
 	return 0;
 }
 
@@ -559,7 +565,7 @@ static const struct v4l2_file_operations cadet_fops = {
 	.open		= cadet_open,
 	.release       	= cadet_release,
 	.read		= cadet_read,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.poll		= cadet_poll,
 };
 
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index 79039674a0e..28fa85ba208 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -361,7 +361,7 @@ MODULE_DEVICE_TABLE(pci, gemtek_pci_id);
 
 static const struct v4l2_file_operations gemtek_pci_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = {
@@ -422,11 +422,11 @@ static int __devinit gemtek_pci_probe(struct pci_dev *pdev, const struct pci_dev
 	card->vdev.release = video_device_release_empty;
 	video_set_drvdata(&card->vdev, card);
 
+	gemtek_pci_mute(card);
+
 	if (video_register_device(&card->vdev, VFL_TYPE_RADIO, nr_radio) < 0)
 		goto err_video;
 
-	gemtek_pci_mute(card);
-
 	v4l2_info(v4l2_dev, "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
 		pdev->revision, card->iobase, card->iobase + card->length - 1);
 
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index 73985f641f0..259936422e4 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -378,7 +378,7 @@ static int gemtek_probe(struct gemtek *gt)
 
 static const struct v4l2_file_operations gemtek_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static int vidioc_querycap(struct file *file, void *priv,
@@ -577,12 +577,6 @@ static int __init gemtek_init(void)
 	gt->vdev.release = video_device_release_empty;
 	video_set_drvdata(&gt->vdev, gt);
 
-	if (video_register_device(&gt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(v4l2_dev);
-		release_region(gt->io, 1);
-		return -EBUSY;
-	}
-
 	/* Set defaults */
 	gt->lastfreq = GEMTEK_LOWFREQ;
 	gt->bu2614data = 0;
@@ -590,6 +584,12 @@ static int __init gemtek_init(void)
 	if (initmute)
 		gemtek_mute(gt);
 
+	if (video_register_device(&gt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_device_unregister(v4l2_dev);
+		release_region(gt->io, 1);
+		return -EBUSY;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c
index 08f1051979c..6af61bfeb17 100644
--- a/drivers/media/radio/radio-maestro.c
+++ b/drivers/media/radio/radio-maestro.c
@@ -299,7 +299,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations maestro_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops maestro_ioctl_ops = {
@@ -383,22 +383,20 @@ static int __devinit maestro_probe(struct pci_dev *pdev,
 	dev->vdev.release = video_device_release_empty;
 	video_set_drvdata(&dev->vdev, dev);
 
+	if (!radio_power_on(dev)) {
+		retval = -EIO;
+		goto errfr1;
+	}
+
 	retval = video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr);
 	if (retval) {
 		v4l2_err(v4l2_dev, "can't register video device!\n");
 		goto errfr1;
 	}
 
-	if (!radio_power_on(dev)) {
-		retval = -EIO;
-		goto errunr;
-	}
-
 	v4l2_info(v4l2_dev, "version " DRIVER_VERSION "\n");
 
 	return 0;
-errunr:
-	video_unregister_device(&dev->vdev);
 errfr1:
 	v4l2_device_unregister(v4l2_dev);
 errfr:
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 255d40df4b4..6459a220b0d 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -346,7 +346,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 
 static const struct v4l2_file_operations maxiradio_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl          = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = {
diff --git a/drivers/media/radio/radio-miropcm20.c b/drivers/media/radio/radio-miropcm20.c
index 4ff885445fd..3fb76e3834c 100644
--- a/drivers/media/radio/radio-miropcm20.c
+++ b/drivers/media/radio/radio-miropcm20.c
@@ -33,6 +33,7 @@ struct pcm20 {
 	unsigned long freq;
 	int muted;
 	struct snd_miro_aci *aci;
+	struct mutex lock;
 };
 
 static struct pcm20 pcm20_card = {
@@ -72,7 +73,7 @@ static int pcm20_setfreq(struct pcm20 *dev, unsigned long freq)
 
 static const struct v4l2_file_operations pcm20_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static int vidioc_querycap(struct file *file, void *priv,
@@ -229,7 +230,7 @@ static int __init pcm20_init(void)
 		return -ENODEV;
 	}
 	strlcpy(v4l2_dev->name, "miropcm20", sizeof(v4l2_dev->name));
-
+	mutex_init(&dev->lock);
 
 	res = v4l2_device_register(NULL, v4l2_dev);
 	if (res < 0) {
@@ -242,6 +243,7 @@ static int __init pcm20_init(void)
 	dev->vdev.fops = &pcm20_fops;
 	dev->vdev.ioctl_ops = &pcm20_ioctl_ops;
 	dev->vdev.release = video_device_release_empty;
+	dev->vdev.lock = &dev->lock;
 	video_set_drvdata(&dev->vdev, dev);
 
 	if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0)
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index b540e8072e9..e6b2d085a44 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -58,7 +58,6 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c
index a79296aac9a..8d6ea591bd1 100644
--- a/drivers/media/radio/radio-rtrack2.c
+++ b/drivers/media/radio/radio-rtrack2.c
@@ -266,7 +266,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations rtrack2_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops rtrack2_ioctl_ops = {
@@ -315,6 +315,10 @@ static int __init rtrack2_init(void)
 	dev->vdev.release = video_device_release_empty;
 	video_set_drvdata(&dev->vdev, dev);
 
+	/* mute card - prevents noisy bootups */
+	outb(1, dev->io);
+	dev->muted = 1;
+
 	mutex_init(&dev->lock);
 	if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(v4l2_dev);
@@ -324,10 +328,6 @@ static int __init rtrack2_init(void)
 
 	v4l2_info(v4l2_dev, "AIMSlab Radiotrack II card driver.\n");
 
-	/* mute card - prevents noisy bootups */
-	outb(1, dev->io);
-	dev->muted = 1;
-
 	return 0;
 }
 
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index 985359d18aa..b5a5f89e238 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -260,7 +260,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations fmi_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
@@ -382,6 +382,9 @@ static int __init fmi_init(void)
 
 	mutex_init(&fmi->lock);
 
+	/* mute card - prevents noisy bootups */
+	fmi_mute(fmi);
+
 	if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(v4l2_dev);
 		release_region(fmi->io, 2);
@@ -391,8 +394,6 @@ static int __init fmi_init(void)
 	}
 
 	v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io);
-	/* mute card - prevents noisy bootups */
-	fmi_mute(fmi);
 	return 0;
 }
 
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index 52c7bbb32b8..dc3f04c52d5 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -376,7 +376,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations fmr2_fops = {
 	.owner          = THIS_MODULE,
-	.ioctl          = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
@@ -424,6 +424,10 @@ static int __init fmr2_init(void)
 	fmr2->vdev.release = video_device_release_empty;
 	video_set_drvdata(&fmr2->vdev, fmr2);
 
+	/* mute card - prevents noisy bootups */
+	fmr2_mute(fmr2->io);
+	fmr2_product_info(fmr2);
+
 	if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(v4l2_dev);
 		release_region(fmr2->io, 2);
@@ -431,11 +435,6 @@ static int __init fmr2_init(void)
 	}
 
 	v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io);
-	/* mute card - prevents noisy bootups */
-	mutex_lock(&fmr2->lock);
-	fmr2_mute(fmr2->io);
-	fmr2_product_info(fmr2);
-	mutex_unlock(&fmr2->lock);
 	debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type));
 	return 0;
 }
diff --git a/drivers/media/radio/radio-si4713.c b/drivers/media/radio/radio-si4713.c
index 6a435786b63..726d367ad8d 100644
--- a/drivers/media/radio/radio-si4713.c
+++ b/drivers/media/radio/radio-si4713.c
@@ -53,7 +53,8 @@ struct radio_si4713_device {
 /* radio_si4713_fops - file operations interface */
 static const struct v4l2_file_operations radio_si4713_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	/* Note: locking is done at the subdev level in the i2c driver. */
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 /* Video4Linux Interface */
@@ -291,7 +292,7 @@ static int radio_si4713_pdriver_probe(struct platform_device *pdev)
 		goto unregister_v4l2_dev;
 	}
 
-	sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter, NULL,
+	sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter,
 					pdata->subdev_board_info, NULL);
 	if (!sd) {
 		dev_err(&pdev->dev, "Cannot get v4l2 subdevice\n");
diff --git a/drivers/media/radio/radio-tea5764.c b/drivers/media/radio/radio-tea5764.c
index 789d2ec66e1..0e71d816c72 100644
--- a/drivers/media/radio/radio-tea5764.c
+++ b/drivers/media/radio/radio-tea5764.c
@@ -142,7 +142,6 @@ struct tea5764_device {
 	struct video_device		*videodev;
 	struct tea5764_regs		regs;
 	struct mutex			mutex;
-	int				users;
 };
 
 /* I2C code related */
@@ -458,41 +457,10 @@ static int vidioc_s_audio(struct file *file, void *priv,
 	return 0;
 }
 
-static int tea5764_open(struct file *file)
-{
-	/* Currently we support only one device */
-	struct tea5764_device *radio = video_drvdata(file);
-
-	mutex_lock(&radio->mutex);
-	/* Only exclusive access */
-	if (radio->users) {
-		mutex_unlock(&radio->mutex);
-		return -EBUSY;
-	}
-	radio->users++;
-	mutex_unlock(&radio->mutex);
-	file->private_data = radio;
-	return 0;
-}
-
-static int tea5764_close(struct file *file)
-{
-	struct tea5764_device *radio = video_drvdata(file);
-
-	if (!radio)
-		return -ENODEV;
-	mutex_lock(&radio->mutex);
-	radio->users--;
-	mutex_unlock(&radio->mutex);
-	return 0;
-}
-
 /* File system interface */
 static const struct v4l2_file_operations tea5764_fops = {
 	.owner		= THIS_MODULE,
-	.open           = tea5764_open,
-	.release        = tea5764_close,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops tea5764_ioctl_ops = {
@@ -527,7 +495,7 @@ static int __devinit tea5764_i2c_probe(struct i2c_client *client,
 	int ret;
 
 	PDEBUG("probe");
-	radio = kmalloc(sizeof(struct tea5764_device), GFP_KERNEL);
+	radio = kzalloc(sizeof(struct tea5764_device), GFP_KERNEL);
 	if (!radio)
 		return -ENOMEM;
 
@@ -555,12 +523,7 @@ static int __devinit tea5764_i2c_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, radio);
 	video_set_drvdata(radio->videodev, radio);
-
-	ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
-	if (ret < 0) {
-		PWARN("Could not register video device!");
-		goto errrel;
-	}
+	radio->videodev->lock = &radio->mutex;
 
 	/* initialize and power off the chip */
 	tea5764_i2c_read(radio);
@@ -568,6 +531,12 @@ static int __devinit tea5764_i2c_probe(struct i2c_client *client,
 	tea5764_mute(radio, 1);
 	tea5764_power_down(radio);
 
+	ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+	if (ret < 0) {
+		PWARN("Could not register video device!");
+		goto errrel;
+	}
+
 	PINFO("registered.");
 	return 0;
 errrel:
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
index fc1c860fd43..a3266391705 100644
--- a/drivers/media/radio/radio-terratec.c
+++ b/drivers/media/radio/radio-terratec.c
@@ -338,7 +338,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations terratec_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops terratec_ioctl_ops = {
@@ -389,6 +389,9 @@ static int __init terratec_init(void)
 
 	mutex_init(&tt->lock);
 
+	/* mute card - prevents noisy bootups */
+	tt_write_vol(tt, 0);
+
 	if (video_register_device(&tt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(&tt->v4l2_dev);
 		release_region(tt->io, 2);
@@ -396,9 +399,6 @@ static int __init terratec_init(void)
 	}
 
 	v4l2_info(v4l2_dev, "TERRATEC ActivRadio Standalone card driver.\n");
-
-	/* mute card - prevents noisy bootups */
-	tt_write_vol(tt, 0);
 	return 0;
 }
 
diff --git a/drivers/media/radio/radio-timb.c b/drivers/media/radio/radio-timb.c
index b8bb3ef47df..a185610b376 100644
--- a/drivers/media/radio/radio-timb.c
+++ b/drivers/media/radio/radio-timb.c
@@ -34,6 +34,7 @@ struct timbradio {
 	struct v4l2_subdev	*sd_dsp;
 	struct video_device	video_dev;
 	struct v4l2_device	v4l2_dev;
+	struct mutex		lock;
 };
 
 
@@ -142,7 +143,7 @@ static const struct v4l2_ioctl_ops timbradio_ioctl_ops = {
 
 static const struct v4l2_file_operations timbradio_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static int __devinit timbradio_probe(struct platform_device *pdev)
@@ -164,6 +165,7 @@ static int __devinit timbradio_probe(struct platform_device *pdev)
 	}
 
 	tr->pdata = *pdata;
+	mutex_init(&tr->lock);
 
 	strlcpy(tr->video_dev.name, "Timberdale Radio",
 		sizeof(tr->video_dev.name));
@@ -171,6 +173,7 @@ static int __devinit timbradio_probe(struct platform_device *pdev)
 	tr->video_dev.ioctl_ops = &timbradio_ioctl_ops;
 	tr->video_dev.release = video_device_release_empty;
 	tr->video_dev.minor = -1;
+	tr->video_dev.lock = &tr->lock;
 
 	strlcpy(tr->v4l2_dev.name, DRIVER_NAME, sizeof(tr->v4l2_dev.name));
 	err = v4l2_device_register(NULL, &tr->v4l2_dev);
diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c
index 9d6dcf8af5b..22fa9cc28ab 100644
--- a/drivers/media/radio/radio-trust.c
+++ b/drivers/media/radio/radio-trust.c
@@ -344,7 +344,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations trust_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops trust_ioctl_ops = {
@@ -396,14 +396,6 @@ static int __init trust_init(void)
 	tr->vdev.release = video_device_release_empty;
 	video_set_drvdata(&tr->vdev, tr);
 
-	if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(v4l2_dev);
-		release_region(tr->io, 2);
-		return -EINVAL;
-	}
-
-	v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n");
-
 	write_i2c(tr, 2, TDA7318_ADDR, 0x80);	/* speaker att. LF = 0 dB */
 	write_i2c(tr, 2, TDA7318_ADDR, 0xa0);	/* speaker att. RF = 0 dB */
 	write_i2c(tr, 2, TDA7318_ADDR, 0xc0);	/* speaker att. LR = 0 dB */
@@ -418,6 +410,14 @@ static int __init trust_init(void)
 	/* mute card - prevents noisy bootups */
 	tr_setmute(tr, 1);
 
+	if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_device_unregister(v4l2_dev);
+		release_region(tr->io, 2);
+		return -EINVAL;
+	}
+
+	v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n");
+
 	return 0;
 }
 
diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c
index b1f630527dc..8dbbf08f220 100644
--- a/drivers/media/radio/radio-typhoon.c
+++ b/drivers/media/radio/radio-typhoon.c
@@ -317,7 +317,7 @@ static int vidioc_log_status(struct file *file, void *priv)
 
 static const struct v4l2_file_operations typhoon_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
@@ -344,18 +344,18 @@ static int __init typhoon_init(void)
 
 	strlcpy(v4l2_dev->name, "typhoon", sizeof(v4l2_dev->name));
 	dev->io = io;
-	dev->curfreq = dev->mutefreq = mutefreq;
 
 	if (dev->io == -1) {
 		v4l2_err(v4l2_dev, "You must set an I/O address with io=0x316 or io=0x336\n");
 		return -EINVAL;
 	}
 
-	if (dev->mutefreq < 87000 || dev->mutefreq > 108500) {
+	if (mutefreq < 87000 || mutefreq > 108500) {
 		v4l2_err(v4l2_dev, "You must set a frequency (in kHz) used when muting the card,\n");
 		v4l2_err(v4l2_dev, "e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n");
 		return -EINVAL;
 	}
+	dev->curfreq = dev->mutefreq = mutefreq << 4;
 
 	mutex_init(&dev->lock);
 	if (!request_region(dev->io, 8, "typhoon")) {
@@ -378,17 +378,17 @@ static int __init typhoon_init(void)
 	dev->vdev.ioctl_ops = &typhoon_ioctl_ops;
 	dev->vdev.release = video_device_release_empty;
 	video_set_drvdata(&dev->vdev, dev);
+
+	/* mute card - prevents noisy bootups */
+	typhoon_mute(dev);
+
 	if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(&dev->v4l2_dev);
 		release_region(dev->io, 8);
 		return -EINVAL;
 	}
 	v4l2_info(v4l2_dev, "port 0x%x.\n", dev->io);
-	v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", dev->mutefreq);
-	dev->mutefreq <<= 4;
-
-	/* mute card - prevents noisy bootups */
-	typhoon_mute(dev);
+	v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", mutefreq);
 
 	return 0;
 }
diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c
new file mode 100644
index 00000000000..dd6bd364efa
--- /dev/null
+++ b/drivers/media/radio/radio-wl1273.c
@@ -0,0 +1,2330 @@
+/*
+ * Driver for the Texas Instruments WL1273 FM radio.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Author: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/wl1273-core.h>
+#include <linux/slab.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-ioctl.h>
+
+#define DRIVER_DESC "Wl1273 FM Radio"
+
+#define WL1273_POWER_SET_OFF		0
+#define WL1273_POWER_SET_FM		BIT(0)
+#define WL1273_POWER_SET_RDS		BIT(1)
+#define WL1273_POWER_SET_RETENTION	BIT(4)
+
+#define WL1273_PUPD_SET_OFF		0x00
+#define WL1273_PUPD_SET_ON		0x01
+#define WL1273_PUPD_SET_RETENTION	0x10
+
+#define WL1273_FREQ(x)		(x * 10000 / 625)
+#define WL1273_INV_FREQ(x)	(x * 625 / 10000)
+
+/*
+ * static int radio_nr - The number of the radio device
+ *
+ * The default is 0.
+ */
+static int radio_nr;
+module_param(radio_nr, int, 0);
+MODULE_PARM_DESC(radio_nr, "The number of the radio device. Default = 0");
+
+struct wl1273_device {
+	char *bus_type;
+
+	u8 forbidden;
+	unsigned int preemphasis;
+	unsigned int spacing;
+	unsigned int tx_power;
+	unsigned int rx_frequency;
+	unsigned int tx_frequency;
+	unsigned int rangelow;
+	unsigned int rangehigh;
+	unsigned int band;
+	bool stereo;
+
+	/* RDS */
+	unsigned int rds_on;
+	struct delayed_work work;
+
+	wait_queue_head_t read_queue;
+	struct mutex lock; /* for serializing fm radio operations */
+	struct completion busy;
+
+	unsigned char *buffer;
+	unsigned int buf_size;
+	unsigned int rd_index;
+	unsigned int wr_index;
+
+	/* Selected interrupts */
+	u16 irq_flags;
+	u16 irq_received;
+
+	struct v4l2_ctrl_handler ctrl_handler;
+	struct v4l2_device v4l2dev;
+	struct video_device videodev;
+	struct device *dev;
+	struct wl1273_core *core;
+	struct file *owner;
+	char *write_buf;
+	unsigned int rds_users;
+};
+
+#define WL1273_IRQ_MASK	 (WL1273_FR_EVENT		|	\
+			  WL1273_POW_ENB_EVENT)
+
+/*
+ * static unsigned int rds_buf - the number of RDS buffer blocks used.
+ *
+ * The default number is 100.
+ */
+static unsigned int rds_buf = 100;
+module_param(rds_buf, uint, 0);
+MODULE_PARM_DESC(rds_buf, "Number of RDS buffer entries. Default = 100");
+
+static int wl1273_fm_read_reg(struct wl1273_core *core, u8 reg, u16 *value)
+{
+	struct i2c_client *client = core->client;
+	u8 b[2];
+	int r;
+
+	r = i2c_smbus_read_i2c_block_data(client, reg, sizeof(b), b);
+	if (r != 2) {
+		dev_err(&client->dev, "%s: Read: %d fails.\n", __func__, reg);
+		return -EREMOTEIO;
+	}
+
+	*value = (u16)b[0] << 8 | b[1];
+
+	return 0;
+}
+
+static int wl1273_fm_write_cmd(struct wl1273_core *core, u8 cmd, u16 param)
+{
+	struct i2c_client *client = core->client;
+	u8 buf[] = { (param >> 8) & 0xff, param & 0xff };
+	int r;
+
+	r = i2c_smbus_write_i2c_block_data(client, cmd, sizeof(buf), buf);
+	if (r) {
+		dev_err(&client->dev, "%s: Cmd: %d fails.\n", __func__, cmd);
+		return r;
+	}
+
+	return 0;
+}
+
+static int wl1273_fm_write_data(struct wl1273_core *core, u8 *data, u16 len)
+{
+	struct i2c_client *client = core->client;
+	struct i2c_msg msg;
+	int r;
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+	msg.buf = data;
+	msg.len = len;
+
+	r = i2c_transfer(client->adapter, &msg, 1);
+	if (r != 1) {
+		dev_err(&client->dev, "%s: write error.\n", __func__);
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static int wl1273_fm_write_fw(struct wl1273_core *core,
+			      __u8 *fw, int len)
+{
+	struct i2c_client *client = core->client;
+	struct i2c_msg msg;
+	int i, r = 0;
+
+	msg.addr = client->addr;
+	msg.flags = 0;
+
+	for (i = 0; i <= len; i++) {
+		msg.len = fw[0];
+		msg.buf = fw + 1;
+
+		fw += msg.len + 1;
+		dev_dbg(&client->dev, "%s:len[%d]: %d\n", __func__, i, msg.len);
+
+		r = i2c_transfer(client->adapter, &msg, 1);
+		if (r < 0 && i < len + 1)
+			break;
+	}
+
+	dev_dbg(&client->dev, "%s: i: %d\n", __func__, i);
+	dev_dbg(&client->dev, "%s: len + 1: %d\n", __func__, len + 1);
+
+	/* Last transfer always fails. */
+	if (i == len || r == 1)
+		r = 0;
+
+	return r;
+}
+
+/**
+ * wl1273_fm_set_audio() -	Set audio mode.
+ * @core:			A pointer to the device struct.
+ * @new_mode:			The new audio mode.
+ *
+ * Audio modes are WL1273_AUDIO_DIGITAL and WL1273_AUDIO_ANALOG.
+ */
+static int wl1273_fm_set_audio(struct wl1273_core *core, unsigned int new_mode)
+{
+	int r = 0;
+
+	if (core->mode == WL1273_MODE_OFF ||
+	    core->mode == WL1273_MODE_SUSPENDED)
+		return -EPERM;
+
+	if (core->mode == WL1273_MODE_RX && new_mode == WL1273_AUDIO_DIGITAL) {
+		r = wl1273_fm_write_cmd(core, WL1273_PCM_MODE_SET,
+					WL1273_PCM_DEF_MODE);
+		if (r)
+			goto out;
+
+		r = wl1273_fm_write_cmd(core, WL1273_I2S_MODE_CONFIG_SET,
+					core->i2s_mode);
+		if (r)
+			goto out;
+
+		r = wl1273_fm_write_cmd(core, WL1273_AUDIO_ENABLE,
+					WL1273_AUDIO_ENABLE_I2S);
+		if (r)
+			goto out;
+
+	} else if (core->mode == WL1273_MODE_RX &&
+		   new_mode == WL1273_AUDIO_ANALOG) {
+		r = wl1273_fm_write_cmd(core, WL1273_AUDIO_ENABLE,
+					WL1273_AUDIO_ENABLE_ANALOG);
+		if (r)
+			goto out;
+
+	} else if (core->mode == WL1273_MODE_TX &&
+		   new_mode == WL1273_AUDIO_DIGITAL) {
+		r = wl1273_fm_write_cmd(core, WL1273_I2S_MODE_CONFIG_SET,
+					core->i2s_mode);
+		if (r)
+			goto out;
+
+		r = wl1273_fm_write_cmd(core, WL1273_AUDIO_IO_SET,
+					WL1273_AUDIO_IO_SET_I2S);
+		if (r)
+			goto out;
+
+	} else if (core->mode == WL1273_MODE_TX &&
+		   new_mode == WL1273_AUDIO_ANALOG) {
+		r = wl1273_fm_write_cmd(core, WL1273_AUDIO_IO_SET,
+					WL1273_AUDIO_IO_SET_ANALOG);
+		if (r)
+			goto out;
+	}
+
+	core->audio_mode = new_mode;
+out:
+	return r;
+}
+
+/**
+ * wl1273_fm_set_volume() -	Set volume.
+ * @core:			A pointer to the device struct.
+ * @volume:			The new volume value.
+ */
+static int wl1273_fm_set_volume(struct wl1273_core *core, unsigned int volume)
+{
+	u16 val;
+	int r;
+
+	if (volume > WL1273_MAX_VOLUME)
+		return -EINVAL;
+
+	if (core->volume == volume)
+		return 0;
+
+	val = volume;
+	r = wl1273_fm_read_reg(core, WL1273_VOLUME_SET, &val);
+	if (r)
+		return r;
+
+	core->volume = volume;
+	return 0;
+}
+
+#define WL1273_FIFO_HAS_DATA(status)	(1 << 5 & status)
+#define WL1273_RDS_CORRECTABLE_ERROR	(1 << 3)
+#define WL1273_RDS_UNCORRECTABLE_ERROR	(1 << 4)
+
+static int wl1273_fm_rds(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	struct i2c_client *client = core->client;
+	u16 val;
+	u8 b0 = WL1273_RDS_DATA_GET, status;
+	struct v4l2_rds_data rds = { 0, 0, 0 };
+	struct i2c_msg msg[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.buf = &b0,
+			.len = 1,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.buf = (u8 *) &rds,
+			.len = sizeof(rds),
+		}
+	};
+	int r;
+
+	if (core->mode != WL1273_MODE_RX)
+		return 0;
+
+	r = wl1273_fm_read_reg(core, WL1273_RDS_SYNC_GET, &val);
+	if (r)
+		return r;
+
+	if ((val & 0x01) == 0) {
+		/* RDS decoder not synchronized */
+		return -EAGAIN;
+	}
+
+	/* copy all four RDS blocks to internal buffer */
+	do {
+		r = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+		if (r != ARRAY_SIZE(msg)) {
+			dev_err(radio->dev, WL1273_FM_DRIVER_NAME
+				": %s: read_rds error r == %i)\n",
+				__func__, r);
+		}
+
+		status = rds.block;
+
+		if (!WL1273_FIFO_HAS_DATA(status))
+			break;
+
+		/* copy bits 0-2 (the block ID) to bits 3-5 */
+		rds.block = V4L2_RDS_BLOCK_MSK & status;
+		rds.block |= rds.block << 3;
+
+		/* copy the error bits to standard positions */
+		if (WL1273_RDS_UNCORRECTABLE_ERROR & status) {
+			rds.block |= V4L2_RDS_BLOCK_ERROR;
+			rds.block &= ~V4L2_RDS_BLOCK_CORRECTED;
+		} else if  (WL1273_RDS_CORRECTABLE_ERROR & status) {
+			rds.block &= ~V4L2_RDS_BLOCK_ERROR;
+			rds.block |= V4L2_RDS_BLOCK_CORRECTED;
+		}
+
+		/* copy RDS block to internal buffer */
+		memcpy(&radio->buffer[radio->wr_index], &rds, RDS_BLOCK_SIZE);
+		radio->wr_index += 3;
+
+		/* wrap write pointer */
+		if (radio->wr_index >= radio->buf_size)
+			radio->wr_index = 0;
+
+		/* check for overflow & start over */
+		if (radio->wr_index == radio->rd_index) {
+			dev_dbg(radio->dev, "RDS OVERFLOW");
+
+			radio->rd_index = 0;
+			radio->wr_index = 0;
+			break;
+		}
+	} while (WL1273_FIFO_HAS_DATA(status));
+
+	/* wake up read queue */
+	if (radio->wr_index != radio->rd_index)
+		wake_up_interruptible(&radio->read_queue);
+
+	return 0;
+}
+
+static irqreturn_t wl1273_fm_irq_thread_handler(int irq, void *dev_id)
+{
+	struct wl1273_device *radio = dev_id;
+	struct wl1273_core *core = radio->core;
+	u16 flags;
+	int r;
+
+	r = wl1273_fm_read_reg(core, WL1273_FLAG_GET, &flags);
+	if (r)
+		goto out;
+
+	if (flags & WL1273_BL_EVENT) {
+		radio->irq_received = flags;
+		dev_dbg(radio->dev, "IRQ: BL\n");
+	}
+
+	if (flags & WL1273_RDS_EVENT) {
+		msleep(200);
+
+		wl1273_fm_rds(radio);
+	}
+
+	if (flags & WL1273_BBLK_EVENT)
+		dev_dbg(radio->dev, "IRQ: BBLK\n");
+
+	if (flags & WL1273_LSYNC_EVENT)
+		dev_dbg(radio->dev, "IRQ: LSYNC\n");
+
+	if (flags & WL1273_LEV_EVENT) {
+		u16 level;
+
+		r = wl1273_fm_read_reg(core, WL1273_RSSI_LVL_GET, &level);
+		if (r)
+			goto out;
+
+		if (level > 14)
+			dev_dbg(radio->dev, "IRQ: LEV: 0x%x04\n", level);
+	}
+
+	if (flags & WL1273_IFFR_EVENT)
+		dev_dbg(radio->dev, "IRQ: IFFR\n");
+
+	if (flags & WL1273_PI_EVENT)
+		dev_dbg(radio->dev, "IRQ: PI\n");
+
+	if (flags & WL1273_PD_EVENT)
+		dev_dbg(radio->dev, "IRQ: PD\n");
+
+	if (flags & WL1273_STIC_EVENT)
+		dev_dbg(radio->dev, "IRQ: STIC\n");
+
+	if (flags & WL1273_MAL_EVENT)
+		dev_dbg(radio->dev, "IRQ: MAL\n");
+
+	if (flags & WL1273_POW_ENB_EVENT) {
+		complete(&radio->busy);
+		dev_dbg(radio->dev, "NOT BUSY\n");
+		dev_dbg(radio->dev, "IRQ: POW_ENB\n");
+	}
+
+	if (flags & WL1273_SCAN_OVER_EVENT)
+		dev_dbg(radio->dev, "IRQ: SCAN_OVER\n");
+
+	if (flags & WL1273_ERROR_EVENT)
+		dev_dbg(radio->dev, "IRQ: ERROR\n");
+
+	if (flags & WL1273_FR_EVENT) {
+		u16 freq;
+
+		dev_dbg(radio->dev, "IRQ: FR:\n");
+
+		if (core->mode == WL1273_MODE_RX) {
+			r = wl1273_fm_write_cmd(core, WL1273_TUNER_MODE_SET,
+						TUNER_MODE_STOP_SEARCH);
+			if (r) {
+				dev_err(radio->dev,
+					"%s: TUNER_MODE_SET fails: %d\n",
+					__func__, r);
+				goto out;
+			}
+
+			r = wl1273_fm_read_reg(core, WL1273_FREQ_SET, &freq);
+			if (r)
+				goto out;
+
+			if (radio->band == WL1273_BAND_JAPAN)
+				radio->rx_frequency = WL1273_BAND_JAPAN_LOW +
+					freq * 50;
+			else
+				radio->rx_frequency = WL1273_BAND_OTHER_LOW +
+					freq * 50;
+			/*
+			 *  The driver works better with this msleep,
+			 *  the documentation doesn't mention it.
+			 */
+			usleep_range(10000, 15000);
+
+			dev_dbg(radio->dev, "%dkHz\n", radio->rx_frequency);
+
+		} else {
+			r = wl1273_fm_read_reg(core, WL1273_CHANL_SET, &freq);
+			if (r)
+				goto out;
+
+			dev_dbg(radio->dev, "%dkHz\n", freq);
+		}
+		dev_dbg(radio->dev, "%s: NOT BUSY\n", __func__);
+	}
+
+out:
+	wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET,
+			    radio->irq_flags);
+	complete(&radio->busy);
+
+	return IRQ_HANDLED;
+}
+
+static int wl1273_fm_set_tx_freq(struct wl1273_device *radio, unsigned int freq)
+{
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	if (freq < WL1273_BAND_TX_LOW) {
+		dev_err(radio->dev,
+			"Frequency out of range: %d < %d\n", freq,
+			WL1273_BAND_TX_LOW);
+		return -ERANGE;
+	}
+
+	if (freq > WL1273_BAND_TX_HIGH) {
+		dev_err(radio->dev,
+			"Frequency out of range: %d > %d\n", freq,
+			WL1273_BAND_TX_HIGH);
+		return -ERANGE;
+	}
+
+	/*
+	 *  The driver works better with this sleep,
+	 *  the documentation doesn't mention it.
+	 */
+	usleep_range(5000, 10000);
+
+	dev_dbg(radio->dev, "%s: freq: %d kHz\n", __func__, freq);
+
+	/* Set the current tx channel */
+	r = wl1273_fm_write_cmd(core, WL1273_CHANL_SET, freq / 10);
+	if (r)
+		return r;
+
+	INIT_COMPLETION(radio->busy);
+
+	/* wait for the FR IRQ */
+	r = wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(2000));
+	if (!r)
+		return -ETIMEDOUT;
+
+	dev_dbg(radio->dev, "WL1273_CHANL_SET: %d\n", r);
+
+	/* Enable the output power */
+	r = wl1273_fm_write_cmd(core, WL1273_POWER_ENB_SET, 1);
+	if (r)
+		return r;
+
+	INIT_COMPLETION(radio->busy);
+
+	/* wait for the POWER_ENB IRQ */
+	r = wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
+	if (!r)
+		return -ETIMEDOUT;
+
+	radio->tx_frequency = freq;
+	dev_dbg(radio->dev, "WL1273_POWER_ENB_SET: %d\n", r);
+
+	return	0;
+}
+
+static int wl1273_fm_set_rx_freq(struct wl1273_device *radio, unsigned int freq)
+{
+	struct wl1273_core *core = radio->core;
+	int r, f;
+
+	if (freq < radio->rangelow) {
+		dev_err(radio->dev,
+			"Frequency out of range: %d < %d\n", freq,
+			radio->rangelow);
+		r = -ERANGE;
+		goto err;
+	}
+
+	if (freq > radio->rangehigh) {
+		dev_err(radio->dev,
+			"Frequency out of range: %d > %d\n", freq,
+			radio->rangehigh);
+		r = -ERANGE;
+		goto err;
+	}
+
+	dev_dbg(radio->dev, "%s: %dkHz\n", __func__, freq);
+
+	wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET, radio->irq_flags);
+
+	if (radio->band == WL1273_BAND_JAPAN)
+		f = (freq - WL1273_BAND_JAPAN_LOW) / 50;
+	else
+		f = (freq - WL1273_BAND_OTHER_LOW) / 50;
+
+	r = wl1273_fm_write_cmd(core, WL1273_FREQ_SET, f);
+	if (r) {
+		dev_err(radio->dev, "FREQ_SET fails\n");
+		goto err;
+	}
+
+	r = wl1273_fm_write_cmd(core, WL1273_TUNER_MODE_SET, TUNER_MODE_PRESET);
+	if (r) {
+		dev_err(radio->dev, "TUNER_MODE_SET fails\n");
+		goto err;
+	}
+
+	INIT_COMPLETION(radio->busy);
+
+	r = wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(2000));
+	if (!r) {
+		dev_err(radio->dev, "%s: TIMEOUT\n", __func__);
+		return -ETIMEDOUT;
+	}
+
+	radio->rd_index = 0;
+	radio->wr_index = 0;
+	radio->rx_frequency = freq;
+	return 0;
+err:
+	return r;
+}
+
+static int wl1273_fm_get_freq(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	unsigned int freq;
+	u16 f;
+	int r;
+
+	if (core->mode == WL1273_MODE_RX) {
+		r = wl1273_fm_read_reg(core, WL1273_FREQ_SET, &f);
+		if (r)
+			return r;
+
+		dev_dbg(radio->dev, "Freq get: 0x%04x\n", f);
+		if (radio->band == WL1273_BAND_JAPAN)
+			freq = WL1273_BAND_JAPAN_LOW + 50 * f;
+		else
+			freq = WL1273_BAND_OTHER_LOW + 50 * f;
+	} else {
+		r = wl1273_fm_read_reg(core, WL1273_CHANL_SET, &f);
+		if (r)
+			return r;
+
+		freq = f * 10;
+	}
+
+	return freq;
+}
+
+/**
+ * wl1273_fm_upload_firmware_patch() -	Upload the firmware.
+ * @radio:				A pointer to the device struct.
+ *
+ * The firmware file consists of arrays of bytes where the first byte
+ * gives the array length. The first byte in the file gives the
+ * number of these arrays.
+ */
+static int wl1273_fm_upload_firmware_patch(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	unsigned int packet_num;
+	const struct firmware *fw_p;
+	const char *fw_name = "radio-wl1273-fw.bin";
+	struct device *dev = radio->dev;
+	__u8 *ptr;
+	int r;
+
+	dev_dbg(dev, "%s:\n", __func__);
+
+	/*
+	 * Uploading the firmware patch is not always necessary,
+	 * so we only print an info message.
+	 */
+	if (request_firmware(&fw_p, fw_name, dev)) {
+		dev_info(dev, "%s - %s not found\n", __func__, fw_name);
+
+		return 0;
+	}
+
+	ptr = (__u8 *) fw_p->data;
+	packet_num = ptr[0];
+	dev_dbg(dev, "%s: packets: %d\n", __func__, packet_num);
+
+	r = wl1273_fm_write_fw(core, ptr + 1, packet_num);
+	if (r) {
+		dev_err(dev, "FW upload error: %d\n", r);
+		goto out;
+	}
+
+	/* ignore possible error here */
+	wl1273_fm_write_cmd(core, WL1273_RESET, 0);
+
+	dev_dbg(dev, "%s - download OK, r: %d\n", __func__, r);
+out:
+	release_firmware(fw_p);
+	return r;
+}
+
+static int wl1273_fm_stop(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+
+	if (core->mode == WL1273_MODE_RX) {
+		int r = wl1273_fm_write_cmd(core, WL1273_POWER_SET,
+				    WL1273_POWER_SET_OFF);
+		if (r)
+			dev_err(radio->dev, "%s: POWER_SET fails: %d\n",
+				__func__, r);
+	} else if (core->mode == WL1273_MODE_TX) {
+		int r = wl1273_fm_write_cmd(core, WL1273_PUPD_SET,
+					    WL1273_PUPD_SET_OFF);
+		if (r)
+			dev_err(radio->dev,
+				"%s: PUPD_SET fails: %d\n", __func__, r);
+	}
+
+	if (core->pdata->disable) {
+		core->pdata->disable();
+		dev_dbg(radio->dev, "Back to reset\n");
+	}
+
+	return 0;
+}
+
+static int wl1273_fm_start(struct wl1273_device *radio, int new_mode)
+{
+	struct wl1273_core *core = radio->core;
+	struct wl1273_fm_platform_data *pdata = core->pdata;
+	struct device *dev = radio->dev;
+	int r = -EINVAL;
+
+	if (pdata->enable && core->mode == WL1273_MODE_OFF) {
+		dev_dbg(radio->dev, "Out of reset\n");
+
+		pdata->enable();
+		msleep(250);
+	}
+
+	if (new_mode == WL1273_MODE_RX) {
+		u16 val = WL1273_POWER_SET_FM;
+
+		if (radio->rds_on)
+			val |= WL1273_POWER_SET_RDS;
+
+		/* If this fails try again */
+		r = wl1273_fm_write_cmd(core, WL1273_POWER_SET, val);
+		if (r) {
+			msleep(100);
+
+			r = wl1273_fm_write_cmd(core, WL1273_POWER_SET, val);
+			if (r) {
+				dev_err(dev, "%s: POWER_SET fails\n", __func__);
+				goto fail;
+			}
+		}
+
+		/* rds buffer configuration */
+		radio->wr_index = 0;
+		radio->rd_index = 0;
+
+	} else if (new_mode == WL1273_MODE_TX) {
+		/* If this fails try again once */
+		r = wl1273_fm_write_cmd(core, WL1273_PUPD_SET,
+					WL1273_PUPD_SET_ON);
+		if (r) {
+			msleep(100);
+			r = wl1273_fm_write_cmd(core, WL1273_PUPD_SET,
+					WL1273_PUPD_SET_ON);
+			if (r) {
+				dev_err(dev, "%s: PUPD_SET fails\n", __func__);
+				goto fail;
+			}
+		}
+
+		if (radio->rds_on)
+			r = wl1273_fm_write_cmd(core, WL1273_RDS_DATA_ENB, 1);
+		else
+			r = wl1273_fm_write_cmd(core, WL1273_RDS_DATA_ENB, 0);
+	} else {
+		dev_warn(dev, "%s: Illegal mode.\n", __func__);
+	}
+
+	if (core->mode == WL1273_MODE_OFF) {
+		r = wl1273_fm_upload_firmware_patch(radio);
+		if (r)
+			dev_warn(dev, "Firmware upload failed.\n");
+
+		/*
+		 * Sometimes the chip is in a wrong power state at this point.
+		 * So we set the power once again.
+		 */
+		if (new_mode == WL1273_MODE_RX) {
+			u16 val = WL1273_POWER_SET_FM;
+
+			if (radio->rds_on)
+				val |= WL1273_POWER_SET_RDS;
+
+			r = wl1273_fm_write_cmd(core, WL1273_POWER_SET, val);
+			if (r) {
+				dev_err(dev, "%s: POWER_SET fails\n", __func__);
+				goto fail;
+			}
+		} else if (new_mode == WL1273_MODE_TX) {
+			r = wl1273_fm_write_cmd(core, WL1273_PUPD_SET,
+						WL1273_PUPD_SET_ON);
+			if (r) {
+				dev_err(dev, "%s: PUPD_SET fails\n", __func__);
+				goto fail;
+			}
+		}
+	}
+
+	return 0;
+fail:
+	if (pdata->disable)
+		pdata->disable();
+
+	dev_dbg(dev, "%s: return: %d\n", __func__, r);
+	return r;
+}
+
+static int wl1273_fm_suspend(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	/* Cannot go from OFF to SUSPENDED */
+	if (core->mode == WL1273_MODE_RX)
+		r = wl1273_fm_write_cmd(core, WL1273_POWER_SET,
+				WL1273_POWER_SET_RETENTION);
+	else if (core->mode == WL1273_MODE_TX)
+		r = wl1273_fm_write_cmd(core, WL1273_PUPD_SET,
+				WL1273_PUPD_SET_RETENTION);
+	else
+		r = -EINVAL;
+
+	if (r) {
+		dev_err(radio->dev, "%s: POWER_SET fails: %d\n", __func__, r);
+		goto out;
+	}
+
+out:
+	return r;
+}
+
+static int wl1273_fm_set_mode(struct wl1273_device *radio, int mode)
+{
+	struct wl1273_core *core = radio->core;
+	struct device *dev = radio->dev;
+	int old_mode;
+	int r;
+
+	dev_dbg(dev, "%s\n", __func__);
+	dev_dbg(dev, "Forbidden modes: 0x%02x\n", radio->forbidden);
+
+	old_mode = core->mode;
+	if (mode & radio->forbidden) {
+		r = -EPERM;
+		goto out;
+	}
+
+	switch (mode) {
+	case WL1273_MODE_RX:
+	case WL1273_MODE_TX:
+		r = wl1273_fm_start(radio, mode);
+		if (r) {
+			dev_err(dev, "%s: Cannot start.\n", __func__);
+			wl1273_fm_stop(radio);
+			goto out;
+		}
+
+		core->mode = mode;
+		r = wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET,
+					radio->irq_flags);
+		if (r) {
+			dev_err(dev, "INT_MASK_SET fails.\n");
+			goto out;
+		}
+
+		/* remember previous settings */
+		if (mode == WL1273_MODE_RX) {
+			r = wl1273_fm_set_rx_freq(radio, radio->rx_frequency);
+			if (r) {
+				dev_err(dev, "set freq fails: %d.\n", r);
+				goto out;
+			}
+
+			r = core->set_volume(core, core->volume);
+			if (r) {
+				dev_err(dev, "set volume fails: %d.\n", r);
+				goto out;
+			}
+
+			dev_dbg(dev, "%s: Set vol: %d.\n", __func__,
+				core->volume);
+		} else {
+			r = wl1273_fm_set_tx_freq(radio, radio->tx_frequency);
+			if (r) {
+				dev_err(dev, "set freq fails: %d.\n", r);
+				goto out;
+			}
+		}
+
+		dev_dbg(radio->dev, "%s: Set audio mode.\n", __func__);
+
+		r = core->set_audio(core, core->audio_mode);
+		if (r)
+			dev_err(dev, "Cannot set audio mode.\n");
+		break;
+
+	case WL1273_MODE_OFF:
+		r = wl1273_fm_stop(radio);
+		if (r)
+			dev_err(dev, "%s: Off fails: %d\n", __func__, r);
+		else
+			core->mode = WL1273_MODE_OFF;
+
+		break;
+
+	case WL1273_MODE_SUSPENDED:
+		r = wl1273_fm_suspend(radio);
+		if (r)
+			dev_err(dev, "%s: Suspend fails: %d\n", __func__, r);
+		else
+			core->mode = WL1273_MODE_SUSPENDED;
+
+		break;
+
+	default:
+		dev_err(dev, "%s: Unknown mode: %d\n", __func__, mode);
+		r = -EINVAL;
+		break;
+	}
+out:
+	if (r)
+		core->mode = old_mode;
+
+	return r;
+}
+
+static int wl1273_fm_set_seek(struct wl1273_device *radio,
+			      unsigned int wrap_around,
+			      unsigned int seek_upward,
+			      int level)
+{
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+	unsigned int dir = (seek_upward == 0) ? 0 : 1;
+	unsigned int f;
+
+	f = radio->rx_frequency;
+	dev_dbg(radio->dev, "rx_frequency: %d\n", f);
+
+	if (dir && f + radio->spacing <= radio->rangehigh)
+		r = wl1273_fm_set_rx_freq(radio, f + radio->spacing);
+	else if (dir && wrap_around)
+		r = wl1273_fm_set_rx_freq(radio, radio->rangelow);
+	else if (f - radio->spacing >= radio->rangelow)
+		r = wl1273_fm_set_rx_freq(radio, f - radio->spacing);
+	else if (wrap_around)
+		r = wl1273_fm_set_rx_freq(radio, radio->rangehigh);
+
+	if (r)
+		goto out;
+
+	if (level < SCHAR_MIN || level > SCHAR_MAX)
+		return -EINVAL;
+
+	INIT_COMPLETION(radio->busy);
+	dev_dbg(radio->dev, "%s: BUSY\n", __func__);
+
+	r = wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET, radio->irq_flags);
+	if (r)
+		goto out;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	r = wl1273_fm_write_cmd(core, WL1273_SEARCH_LVL_SET, level);
+	if (r)
+		goto out;
+
+	r = wl1273_fm_write_cmd(core, WL1273_SEARCH_DIR_SET, dir);
+	if (r)
+		goto out;
+
+	r = wl1273_fm_write_cmd(core, WL1273_TUNER_MODE_SET,
+				TUNER_MODE_AUTO_SEEK);
+	if (r)
+		goto out;
+
+	wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
+	if (!(radio->irq_received & WL1273_BL_EVENT))
+		goto out;
+
+	radio->irq_received &= ~WL1273_BL_EVENT;
+
+	if (!wrap_around)
+		goto out;
+
+	/* Wrap around */
+	dev_dbg(radio->dev, "Wrap around in HW seek.\n");
+
+	if (seek_upward)
+		f = radio->rangelow;
+	else
+		f = radio->rangehigh;
+
+	r = wl1273_fm_set_rx_freq(radio, f);
+	if (r)
+		goto out;
+
+	INIT_COMPLETION(radio->busy);
+	dev_dbg(radio->dev, "%s: BUSY\n", __func__);
+
+	r = wl1273_fm_write_cmd(core, WL1273_TUNER_MODE_SET,
+				TUNER_MODE_AUTO_SEEK);
+	if (r)
+		goto out;
+
+	wait_for_completion_timeout(&radio->busy, msecs_to_jiffies(1000));
+out:
+	dev_dbg(radio->dev, "%s: Err: %d\n", __func__, r);
+	return r;
+}
+
+/**
+ * wl1273_fm_get_tx_ctune() -	Get the TX tuning capacitor value.
+ * @radio:			A pointer to the device struct.
+ */
+static unsigned int wl1273_fm_get_tx_ctune(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	struct device *dev = radio->dev;
+	u16 val;
+	int r;
+
+	if (core->mode == WL1273_MODE_OFF ||
+	    core->mode == WL1273_MODE_SUSPENDED)
+		return -EPERM;
+
+	r = wl1273_fm_read_reg(core, WL1273_READ_FMANT_TUNE_VALUE, &val);
+	if (r) {
+		dev_err(dev, "%s: read error: %d\n", __func__, r);
+		goto out;
+	}
+
+out:
+	return val;
+}
+
+/**
+ * wl1273_fm_set_preemphasis() - Set the TX pre-emphasis value.
+ * @radio:			 A pointer to the device struct.
+ * @preemphasis:		 The new pre-amphasis value.
+ *
+ * Possible pre-emphasis values are: V4L2_PREEMPHASIS_DISABLED,
+ * V4L2_PREEMPHASIS_50_uS and V4L2_PREEMPHASIS_75_uS.
+ */
+static int wl1273_fm_set_preemphasis(struct wl1273_device *radio,
+				     unsigned int preemphasis)
+{
+	struct wl1273_core *core = radio->core;
+	int r;
+	u16 em;
+
+	if (core->mode == WL1273_MODE_OFF ||
+	    core->mode == WL1273_MODE_SUSPENDED)
+		return -EPERM;
+
+	mutex_lock(&core->lock);
+
+	switch (preemphasis) {
+	case V4L2_PREEMPHASIS_DISABLED:
+		em = 1;
+		break;
+	case V4L2_PREEMPHASIS_50_uS:
+		em = 0;
+		break;
+	case V4L2_PREEMPHASIS_75_uS:
+		em = 2;
+		break;
+	default:
+		r = -EINVAL;
+		goto out;
+	}
+
+	r = wl1273_fm_write_cmd(core, WL1273_PREMPH_SET, em);
+	if (r)
+		goto out;
+
+	radio->preemphasis = preemphasis;
+
+out:
+	mutex_unlock(&core->lock);
+	return r;
+}
+
+static int wl1273_fm_rds_on(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	int r;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+	if (radio->rds_on)
+		return 0;
+
+	r = wl1273_fm_write_cmd(core, WL1273_POWER_SET,
+			WL1273_POWER_SET_FM | WL1273_POWER_SET_RDS);
+	if (r)
+		goto out;
+
+	r = wl1273_fm_set_rx_freq(radio, radio->rx_frequency);
+	if (r)
+		dev_err(radio->dev, "set freq fails: %d.\n", r);
+out:
+	return r;
+}
+
+static int wl1273_fm_rds_off(struct wl1273_device *radio)
+{
+	struct wl1273_core *core = radio->core;
+	int r;
+
+	if (!radio->rds_on)
+		return 0;
+
+	radio->irq_flags &= ~WL1273_RDS_EVENT;
+
+	r = wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET, radio->irq_flags);
+	if (r)
+		goto out;
+
+	/* stop rds reception */
+	cancel_delayed_work(&radio->work);
+
+	/* Service pending read */
+	wake_up_interruptible(&radio->read_queue);
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	r = wl1273_fm_write_cmd(core, WL1273_POWER_SET, WL1273_POWER_SET_FM);
+	if (r)
+		goto out;
+
+	r = wl1273_fm_set_rx_freq(radio, radio->rx_frequency);
+	if (r)
+		dev_err(radio->dev, "set freq fails: %d.\n", r);
+out:
+	dev_dbg(radio->dev, "%s: exiting...\n", __func__);
+
+	return r;
+}
+
+static int wl1273_fm_set_rds(struct wl1273_device *radio, unsigned int new_mode)
+{
+	int r = 0;
+	struct wl1273_core *core = radio->core;
+
+	if (core->mode == WL1273_MODE_OFF ||
+	    core->mode == WL1273_MODE_SUSPENDED)
+		return -EPERM;
+
+	if (new_mode == WL1273_RDS_RESET) {
+		r = wl1273_fm_write_cmd(core, WL1273_RDS_CNTRL_SET, 1);
+		return r;
+	}
+
+	if (core->mode == WL1273_MODE_TX && new_mode == WL1273_RDS_OFF) {
+		r = wl1273_fm_write_cmd(core, WL1273_RDS_DATA_ENB, 0);
+	} else if (core->mode == WL1273_MODE_TX && new_mode == WL1273_RDS_ON) {
+		r = wl1273_fm_write_cmd(core, WL1273_RDS_DATA_ENB, 1);
+	} else if (core->mode == WL1273_MODE_RX && new_mode == WL1273_RDS_OFF) {
+		r = wl1273_fm_rds_off(radio);
+	} else if (core->mode == WL1273_MODE_RX && new_mode == WL1273_RDS_ON) {
+		r = wl1273_fm_rds_on(radio);
+	} else {
+		dev_err(radio->dev, "%s: Unknown mode: %d\n",
+			__func__, new_mode);
+		r = -EINVAL;
+	}
+
+	if (!r)
+		radio->rds_on = (new_mode == WL1273_RDS_ON) ? true : false;
+
+	return r;
+}
+
+static ssize_t wl1273_fm_fops_write(struct file *file, const char __user *buf,
+				    size_t count, loff_t *ppos)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	u16 val;
+	int r;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (radio->core->mode != WL1273_MODE_TX)
+		return count;
+
+	if (radio->rds_users == 0) {
+		dev_warn(radio->dev, "%s: RDS not on.\n", __func__);
+		return 0;
+	}
+
+	if (mutex_lock_interruptible(&radio->core->lock))
+		return -EINTR;
+	/*
+	 * Multiple processes can open the device, but only
+	 * one gets to write to it.
+	 */
+	if (radio->owner && radio->owner != file) {
+		r = -EBUSY;
+		goto out;
+	}
+	radio->owner = file;
+
+	/* Manual Mode */
+	if (count > 255)
+		val = 255;
+	else
+		val = count;
+
+	wl1273_fm_write_cmd(radio->core, WL1273_RDS_CONFIG_DATA_SET, val);
+
+	if (copy_from_user(radio->write_buf + 1, buf, val)) {
+		r = -EFAULT;
+		goto out;
+	}
+
+	dev_dbg(radio->dev, "Count: %d\n", val);
+	dev_dbg(radio->dev, "From user: \"%s\"\n", radio->write_buf);
+
+	radio->write_buf[0] = WL1273_RDS_DATA_SET;
+	wl1273_fm_write_data(radio->core, radio->write_buf, val + 1);
+
+	r = val;
+out:
+	mutex_unlock(&radio->core->lock);
+
+	return r;
+}
+
+static unsigned int wl1273_fm_fops_poll(struct file *file,
+					struct poll_table_struct *pts)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+
+	if (radio->owner && radio->owner != file)
+		return -EBUSY;
+
+	radio->owner = file;
+
+	if (core->mode == WL1273_MODE_RX) {
+		poll_wait(file, &radio->read_queue, pts);
+
+		if (radio->rd_index != radio->wr_index)
+			return POLLIN | POLLRDNORM;
+
+	} else if (core->mode == WL1273_MODE_TX) {
+		return POLLOUT | POLLWRNORM;
+	}
+
+	return 0;
+}
+
+static int wl1273_fm_fops_open(struct file *file)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (core->mode == WL1273_MODE_RX && radio->rds_on &&
+	    !radio->rds_users) {
+		dev_dbg(radio->dev, "%s: Mode: %d\n", __func__, core->mode);
+
+		if (mutex_lock_interruptible(&core->lock))
+			return -EINTR;
+
+		radio->irq_flags |= WL1273_RDS_EVENT;
+
+		r = wl1273_fm_write_cmd(core, WL1273_INT_MASK_SET,
+					radio->irq_flags);
+		if (r) {
+			mutex_unlock(&core->lock);
+			goto out;
+		}
+
+		radio->rds_users++;
+
+		mutex_unlock(&core->lock);
+	}
+out:
+	return r;
+}
+
+static int wl1273_fm_fops_release(struct file *file)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (radio->rds_users > 0) {
+		radio->rds_users--;
+		if (radio->rds_users == 0) {
+			if (mutex_lock_interruptible(&core->lock))
+				return -EINTR;
+
+			radio->irq_flags &= ~WL1273_RDS_EVENT;
+
+			if (core->mode == WL1273_MODE_RX) {
+				r = wl1273_fm_write_cmd(core,
+							WL1273_INT_MASK_SET,
+							radio->irq_flags);
+				if (r) {
+					mutex_unlock(&core->lock);
+					goto out;
+				}
+			}
+			mutex_unlock(&core->lock);
+		}
+	}
+
+	if (file == radio->owner)
+		radio->owner = NULL;
+out:
+	return r;
+}
+
+static ssize_t wl1273_fm_fops_read(struct file *file, char __user *buf,
+				   size_t count, loff_t *ppos)
+{
+	int r = 0;
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	unsigned int block_count = 0;
+	u16 val;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (radio->core->mode != WL1273_MODE_RX)
+		return 0;
+
+	if (radio->rds_users == 0) {
+		dev_warn(radio->dev, "%s: RDS not on.\n", __func__);
+		return 0;
+	}
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	/*
+	 * Multiple processes can open the device, but only
+	 * one at a time gets read access.
+	 */
+	if (radio->owner && radio->owner != file) {
+		r = -EBUSY;
+		goto out;
+	}
+	radio->owner = file;
+
+	r = wl1273_fm_read_reg(core, WL1273_RDS_SYNC_GET, &val);
+	if (r) {
+		dev_err(radio->dev, "%s: Get RDS_SYNC fails.\n", __func__);
+		goto out;
+	} else if (val == 0) {
+		dev_info(radio->dev, "RDS_SYNC: Not synchronized\n");
+		r = -ENODATA;
+		goto out;
+	}
+
+	/* block if no new data available */
+	while (radio->wr_index == radio->rd_index) {
+		if (file->f_flags & O_NONBLOCK) {
+			r = -EWOULDBLOCK;
+			goto out;
+		}
+
+		dev_dbg(radio->dev, "%s: Wait for RDS data.\n", __func__);
+		if (wait_event_interruptible(radio->read_queue,
+					     radio->wr_index !=
+					     radio->rd_index) < 0) {
+			r = -EINTR;
+			goto out;
+		}
+	}
+
+	/* calculate block count from byte count */
+	count /= RDS_BLOCK_SIZE;
+
+	/* copy RDS blocks from the internal buffer and to user buffer */
+	while (block_count < count) {
+		if (radio->rd_index == radio->wr_index)
+			break;
+
+		/* always transfer complete RDS blocks */
+		if (copy_to_user(buf, &radio->buffer[radio->rd_index],
+				 RDS_BLOCK_SIZE))
+			break;
+
+		/* increment and wrap the read pointer */
+		radio->rd_index += RDS_BLOCK_SIZE;
+		if (radio->rd_index >= radio->buf_size)
+			radio->rd_index = 0;
+
+		/* increment counters */
+		block_count++;
+		buf += RDS_BLOCK_SIZE;
+		r += RDS_BLOCK_SIZE;
+	}
+
+out:
+	dev_dbg(radio->dev, "%s: exit\n", __func__);
+	mutex_unlock(&core->lock);
+
+	return r;
+}
+
+static const struct v4l2_file_operations wl1273_fops = {
+	.owner		= THIS_MODULE,
+	.read		= wl1273_fm_fops_read,
+	.write		= wl1273_fm_fops_write,
+	.poll		= wl1273_fm_fops_poll,
+	.ioctl		= video_ioctl2,
+	.open		= wl1273_fm_fops_open,
+	.release	= wl1273_fm_fops_release,
+};
+
+static int wl1273_fm_vidioc_querycap(struct file *file, void *priv,
+				     struct v4l2_capability *capability)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	strlcpy(capability->driver, WL1273_FM_DRIVER_NAME,
+		sizeof(capability->driver));
+	strlcpy(capability->card, "Texas Instruments Wl1273 FM Radio",
+		sizeof(capability->card));
+	strlcpy(capability->bus_info, radio->bus_type,
+		sizeof(capability->bus_info));
+
+	capability->capabilities = V4L2_CAP_HW_FREQ_SEEK |
+		V4L2_CAP_TUNER | V4L2_CAP_RADIO | V4L2_CAP_AUDIO |
+		V4L2_CAP_RDS_CAPTURE | V4L2_CAP_MODULATOR |
+		V4L2_CAP_RDS_OUTPUT;
+
+	return 0;
+}
+
+static int wl1273_fm_vidioc_g_input(struct file *file, void *priv,
+				    unsigned int *i)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	*i = 0;
+
+	return 0;
+}
+
+static int wl1273_fm_vidioc_s_input(struct file *file, void *priv,
+				    unsigned int i)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (i != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+/**
+ * wl1273_fm_set_tx_power() -	Set the transmission power value.
+ * @core:			A pointer to the device struct.
+ * @power:			The new power value.
+ */
+static int wl1273_fm_set_tx_power(struct wl1273_device *radio, u16 power)
+{
+	int r;
+
+	if (radio->core->mode == WL1273_MODE_OFF ||
+	    radio->core->mode == WL1273_MODE_SUSPENDED)
+		return -EPERM;
+
+	mutex_lock(&radio->core->lock);
+
+	/* Convert the dBuV value to chip presentation */
+	r = wl1273_fm_write_cmd(radio->core, WL1273_POWER_LEV_SET, 122 - power);
+	if (r)
+		goto out;
+
+	radio->tx_power = power;
+
+out:
+	mutex_unlock(&radio->core->lock);
+	return r;
+}
+
+#define WL1273_SPACING_50kHz	1
+#define WL1273_SPACING_100kHz	2
+#define WL1273_SPACING_200kHz	4
+
+static int wl1273_fm_tx_set_spacing(struct wl1273_device *radio,
+				    unsigned int spacing)
+{
+	int r;
+
+	if (spacing == 0) {
+		r = wl1273_fm_write_cmd(radio->core, WL1273_SCAN_SPACING_SET,
+					WL1273_SPACING_100kHz);
+		radio->spacing = 100;
+	} else if (spacing - 50000 < 25000) {
+		r = wl1273_fm_write_cmd(radio->core, WL1273_SCAN_SPACING_SET,
+					WL1273_SPACING_50kHz);
+		radio->spacing = 50;
+	} else if (spacing - 100000 < 50000) {
+		r = wl1273_fm_write_cmd(radio->core, WL1273_SCAN_SPACING_SET,
+					WL1273_SPACING_100kHz);
+		radio->spacing = 100;
+	} else {
+		r = wl1273_fm_write_cmd(radio->core, WL1273_SCAN_SPACING_SET,
+					WL1273_SPACING_200kHz);
+		radio->spacing = 200;
+	}
+
+	return r;
+}
+
+static int wl1273_fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct wl1273_device *radio = ctrl->priv;
+	struct wl1273_core *core = radio->core;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	switch (ctrl->id) {
+	case  V4L2_CID_TUNE_ANTENNA_CAPACITOR:
+		ctrl->val = wl1273_fm_get_tx_ctune(radio);
+		break;
+
+	default:
+		dev_warn(radio->dev, "%s: Unknown IOCTL: %d\n",
+			 __func__, ctrl->id);
+		break;
+	}
+
+	mutex_unlock(&core->lock);
+
+	return 0;
+}
+
+#define WL1273_MUTE_SOFT_ENABLE    (1 << 0)
+#define WL1273_MUTE_AC             (1 << 1)
+#define WL1273_MUTE_HARD_LEFT      (1 << 2)
+#define WL1273_MUTE_HARD_RIGHT     (1 << 3)
+#define WL1273_MUTE_SOFT_FORCE     (1 << 4)
+
+static inline struct wl1273_device *to_radio(struct v4l2_ctrl *ctrl)
+{
+	return container_of(ctrl->handler, struct wl1273_device, ctrl_handler);
+}
+
+static int wl1273_fm_vidioc_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct wl1273_device *radio = to_radio(ctrl);
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_MUTE:
+		if (mutex_lock_interruptible(&core->lock))
+			return -EINTR;
+
+		if (core->mode == WL1273_MODE_RX && ctrl->val)
+			r = wl1273_fm_write_cmd(core,
+						WL1273_MUTE_STATUS_SET,
+						WL1273_MUTE_HARD_LEFT |
+						WL1273_MUTE_HARD_RIGHT);
+		else if (core->mode == WL1273_MODE_RX)
+			r = wl1273_fm_write_cmd(core,
+						WL1273_MUTE_STATUS_SET, 0x0);
+		else if (core->mode == WL1273_MODE_TX && ctrl->val)
+			r = wl1273_fm_write_cmd(core, WL1273_MUTE, 1);
+		else if (core->mode == WL1273_MODE_TX)
+			r = wl1273_fm_write_cmd(core, WL1273_MUTE, 0);
+
+		mutex_unlock(&core->lock);
+		break;
+
+	case V4L2_CID_AUDIO_VOLUME:
+		if (ctrl->val == 0)
+			r = wl1273_fm_set_mode(radio, WL1273_MODE_OFF);
+		else
+			r =  core->set_volume(core, core->volume);
+		break;
+
+	case V4L2_CID_TUNE_PREEMPHASIS:
+		r = wl1273_fm_set_preemphasis(radio, ctrl->val);
+		break;
+
+	case V4L2_CID_TUNE_POWER_LEVEL:
+		r = wl1273_fm_set_tx_power(radio, ctrl->val);
+		break;
+
+	default:
+		dev_warn(radio->dev, "%s: Unknown IOCTL: %d\n",
+			 __func__, ctrl->id);
+		break;
+	}
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+	return r;
+}
+
+static int wl1273_fm_vidioc_g_audio(struct file *file, void *priv,
+				    struct v4l2_audio *audio)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (audio->index > 1)
+		return -EINVAL;
+
+	strlcpy(audio->name, "Radio", sizeof(audio->name));
+	audio->capability = V4L2_AUDCAP_STEREO;
+
+	return 0;
+}
+
+static int wl1273_fm_vidioc_s_audio(struct file *file, void *priv,
+				    struct v4l2_audio *audio)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (audio->index != 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+#define WL1273_RDS_NOT_SYNCHRONIZED 0
+#define WL1273_RDS_SYNCHRONIZED 1
+
+static int wl1273_fm_vidioc_g_tuner(struct file *file, void *priv,
+				    struct v4l2_tuner *tuner)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	u16 val;
+	int r;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (tuner->index > 0)
+		return -EINVAL;
+
+	strlcpy(tuner->name, WL1273_FM_DRIVER_NAME, sizeof(tuner->name));
+	tuner->type = V4L2_TUNER_RADIO;
+
+	tuner->rangelow	= WL1273_FREQ(WL1273_BAND_JAPAN_LOW);
+	tuner->rangehigh = WL1273_FREQ(WL1273_BAND_OTHER_HIGH);
+
+	tuner->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_RDS |
+		V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS_BLOCK_IO;
+
+	if (radio->stereo)
+		tuner->audmode = V4L2_TUNER_MODE_STEREO;
+	else
+		tuner->audmode = V4L2_TUNER_MODE_MONO;
+
+	if (core->mode != WL1273_MODE_RX)
+		return 0;
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	r = wl1273_fm_read_reg(core, WL1273_STEREO_GET, &val);
+	if (r)
+		goto out;
+
+	if (val == 1)
+		tuner->rxsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		tuner->rxsubchans = V4L2_TUNER_SUB_MONO;
+
+	r = wl1273_fm_read_reg(core, WL1273_RSSI_LVL_GET, &val);
+	if (r)
+		goto out;
+
+	tuner->signal = (s16) val;
+	dev_dbg(radio->dev, "Signal: %d\n", tuner->signal);
+
+	tuner->afc = 0;
+
+	r = wl1273_fm_read_reg(core, WL1273_RDS_SYNC_GET, &val);
+	if (r)
+		goto out;
+
+	if (val == WL1273_RDS_SYNCHRONIZED)
+		tuner->rxsubchans |= V4L2_TUNER_SUB_RDS;
+out:
+	mutex_unlock(&core->lock);
+
+	return r;
+}
+
+static int wl1273_fm_vidioc_s_tuner(struct file *file, void *priv,
+				    struct v4l2_tuner *tuner)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+	dev_dbg(radio->dev, "tuner->index: %d\n", tuner->index);
+	dev_dbg(radio->dev, "tuner->name: %s\n", tuner->name);
+	dev_dbg(radio->dev, "tuner->capability: 0x%04x\n", tuner->capability);
+	dev_dbg(radio->dev, "tuner->rxsubchans: 0x%04x\n", tuner->rxsubchans);
+	dev_dbg(radio->dev, "tuner->rangelow: %d\n", tuner->rangelow);
+	dev_dbg(radio->dev, "tuner->rangehigh: %d\n", tuner->rangehigh);
+
+	if (tuner->index > 0)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	r = wl1273_fm_set_mode(radio, WL1273_MODE_RX);
+	if (r)
+		goto out;
+
+	if (tuner->rxsubchans & V4L2_TUNER_SUB_RDS)
+		r = wl1273_fm_set_rds(radio, WL1273_RDS_ON);
+	else
+		r = wl1273_fm_set_rds(radio, WL1273_RDS_OFF);
+
+	if (r)
+		dev_warn(radio->dev, "%s: RDS fails: %d\n", __func__, r);
+
+	if (tuner->audmode == V4L2_TUNER_MODE_MONO) {
+		r = wl1273_fm_write_cmd(core, WL1273_MOST_MODE_SET,
+					WL1273_RX_MONO);
+		if (r < 0) {
+			dev_warn(radio->dev, "%s: MOST_MODE fails: %d\n",
+				 __func__, r);
+			goto out;
+		}
+		radio->stereo = false;
+	} else if (tuner->audmode == V4L2_TUNER_MODE_STEREO) {
+		r = wl1273_fm_write_cmd(core, WL1273_MOST_MODE_SET,
+					WL1273_RX_STEREO);
+		if (r < 0) {
+			dev_warn(radio->dev, "%s: MOST_MODE fails: %d\n",
+				 __func__, r);
+			goto out;
+		}
+		radio->stereo = true;
+	} else {
+		dev_err(radio->dev, "%s: tuner->audmode: %d\n",
+			 __func__, tuner->audmode);
+		r = -EINVAL;
+		goto out;
+	}
+
+out:
+	mutex_unlock(&core->lock);
+
+	return r;
+}
+
+static int wl1273_fm_vidioc_g_frequency(struct file *file, void *priv,
+					struct v4l2_frequency *freq)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	freq->type = V4L2_TUNER_RADIO;
+	freq->frequency = WL1273_FREQ(wl1273_fm_get_freq(radio));
+
+	mutex_unlock(&core->lock);
+
+	return 0;
+}
+
+static int wl1273_fm_vidioc_s_frequency(struct file *file, void *priv,
+					struct v4l2_frequency *freq)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r;
+
+	dev_dbg(radio->dev, "%s: %d\n", __func__, freq->frequency);
+
+	if (freq->type != V4L2_TUNER_RADIO) {
+		dev_dbg(radio->dev,
+			"freq->type != V4L2_TUNER_RADIO: %d\n", freq->type);
+		return -EINVAL;
+	}
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	if (core->mode == WL1273_MODE_RX) {
+		dev_dbg(radio->dev, "freq: %d\n", freq->frequency);
+
+		r = wl1273_fm_set_rx_freq(radio,
+					  WL1273_INV_FREQ(freq->frequency));
+		if (r)
+			dev_warn(radio->dev, WL1273_FM_DRIVER_NAME
+				 ": set frequency failed with %d\n", r);
+	} else {
+		r = wl1273_fm_set_tx_freq(radio,
+					  WL1273_INV_FREQ(freq->frequency));
+		if (r)
+			dev_warn(radio->dev, WL1273_FM_DRIVER_NAME
+				 ": set frequency failed with %d\n", r);
+	}
+
+	mutex_unlock(&core->lock);
+
+	dev_dbg(radio->dev, "wl1273_vidioc_s_frequency: DONE\n");
+	return r;
+}
+
+#define WL1273_DEFAULT_SEEK_LEVEL	7
+
+static int wl1273_fm_vidioc_s_hw_freq_seek(struct file *file, void *priv,
+					   struct v4l2_hw_freq_seek *seek)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (seek->tuner != 0 || seek->type != V4L2_TUNER_RADIO)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	r = wl1273_fm_set_mode(radio, WL1273_MODE_RX);
+	if (r)
+		goto out;
+
+	r = wl1273_fm_tx_set_spacing(radio, seek->spacing);
+	if (r)
+		dev_warn(radio->dev, "HW seek failed: %d\n", r);
+
+	r = wl1273_fm_set_seek(radio, seek->wrap_around, seek->seek_upward,
+			       WL1273_DEFAULT_SEEK_LEVEL);
+	if (r)
+		dev_warn(radio->dev, "HW seek failed: %d\n", r);
+
+out:
+	mutex_unlock(&core->lock);
+	return r;
+}
+
+static int wl1273_fm_vidioc_s_modulator(struct file *file, void *priv,
+					struct v4l2_modulator *modulator)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	int r = 0;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	if (modulator->index > 0)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	r = wl1273_fm_set_mode(radio, WL1273_MODE_TX);
+	if (r)
+		goto out;
+
+	if (modulator->txsubchans & V4L2_TUNER_SUB_RDS)
+		r = wl1273_fm_set_rds(radio, WL1273_RDS_ON);
+	else
+		r = wl1273_fm_set_rds(radio, WL1273_RDS_OFF);
+
+	if (modulator->txsubchans & V4L2_TUNER_SUB_MONO)
+		r = wl1273_fm_write_cmd(core, WL1273_MONO_SET, WL1273_TX_MONO);
+	else
+		r = wl1273_fm_write_cmd(core, WL1273_MONO_SET,
+					WL1273_RX_STEREO);
+	if (r < 0)
+		dev_warn(radio->dev, WL1273_FM_DRIVER_NAME
+			 "MONO_SET fails: %d\n", r);
+out:
+	mutex_unlock(&core->lock);
+
+	return r;
+}
+
+static int wl1273_fm_vidioc_g_modulator(struct file *file, void *priv,
+					struct v4l2_modulator *modulator)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	u16 val;
+	int r;
+
+	dev_dbg(radio->dev, "%s\n", __func__);
+
+	strlcpy(modulator->name, WL1273_FM_DRIVER_NAME,
+		sizeof(modulator->name));
+
+	modulator->rangelow = WL1273_FREQ(WL1273_BAND_JAPAN_LOW);
+	modulator->rangehigh = WL1273_FREQ(WL1273_BAND_OTHER_HIGH);
+
+	modulator->capability =  V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_RDS |
+		V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_RDS_BLOCK_IO;
+
+	if (core->mode != WL1273_MODE_TX)
+		return 0;
+
+	if (mutex_lock_interruptible(&core->lock))
+		return -EINTR;
+
+	r = wl1273_fm_read_reg(core, WL1273_MONO_SET, &val);
+	if (r)
+		goto out;
+
+	if (val == WL1273_TX_STEREO)
+		modulator->txsubchans = V4L2_TUNER_SUB_STEREO;
+	else
+		modulator->txsubchans = V4L2_TUNER_SUB_MONO;
+
+	if (radio->rds_on)
+		modulator->txsubchans |= V4L2_TUNER_SUB_RDS;
+out:
+	mutex_unlock(&core->lock);
+
+	return 0;
+}
+
+static int wl1273_fm_vidioc_log_status(struct file *file, void *priv)
+{
+	struct wl1273_device *radio = video_get_drvdata(video_devdata(file));
+	struct wl1273_core *core = radio->core;
+	struct device *dev = radio->dev;
+	u16 val;
+	int r;
+
+	dev_info(dev, DRIVER_DESC);
+
+	if (core->mode == WL1273_MODE_OFF) {
+		dev_info(dev, "Mode: Off\n");
+		return 0;
+	}
+
+	if (core->mode == WL1273_MODE_SUSPENDED) {
+		dev_info(dev, "Mode: Suspended\n");
+		return 0;
+	}
+
+	r = wl1273_fm_read_reg(core, WL1273_ASIC_ID_GET, &val);
+	if (r)
+		dev_err(dev, "%s: Get ASIC_ID fails.\n", __func__);
+	else
+		dev_info(dev, "ASIC_ID: 0x%04x\n", val);
+
+	r = wl1273_fm_read_reg(core, WL1273_ASIC_VER_GET, &val);
+	if (r)
+		dev_err(dev, "%s: Get ASIC_VER fails.\n", __func__);
+	else
+		dev_info(dev, "ASIC Version: 0x%04x\n", val);
+
+	r = wl1273_fm_read_reg(core, WL1273_FIRM_VER_GET, &val);
+	if (r)
+		dev_err(dev, "%s: Get FIRM_VER fails.\n", __func__);
+	else
+		dev_info(dev, "FW version: %d(0x%04x)\n", val, val);
+
+	r = wl1273_fm_read_reg(core, WL1273_BAND_SET, &val);
+	if (r)
+		dev_err(dev, "%s: Get BAND fails.\n", __func__);
+	else
+		dev_info(dev, "BAND: %d\n", val);
+
+	if (core->mode == WL1273_MODE_TX) {
+		r = wl1273_fm_read_reg(core, WL1273_PUPD_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get PUPD fails.\n", __func__);
+		else
+			dev_info(dev, "PUPD: 0x%04x\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_CHANL_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get CHANL fails.\n", __func__);
+		else
+			dev_info(dev, "Tx frequency: %dkHz\n", val*10);
+	} else if (core->mode == WL1273_MODE_RX) {
+		int bf = radio->rangelow;
+
+		r = wl1273_fm_read_reg(core, WL1273_FREQ_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get FREQ fails.\n", __func__);
+		else
+			dev_info(dev, "RX Frequency: %dkHz\n", bf + val*50);
+
+		r = wl1273_fm_read_reg(core, WL1273_MOST_MODE_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get MOST_MODE fails.\n",
+				__func__);
+		else if (val == 0)
+			dev_info(dev, "MOST_MODE: Stereo according to blend\n");
+		else if (val == 1)
+			dev_info(dev, "MOST_MODE: Force mono output\n");
+		else
+			dev_info(dev, "MOST_MODE: Unexpected value: %d\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_MOST_BLEND_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get MOST_BLEND fails.\n", __func__);
+		else if (val == 0)
+			dev_info(dev,
+				 "MOST_BLEND: Switched blend & hysteresis.\n");
+		else if (val == 1)
+			dev_info(dev, "MOST_BLEND: Soft blend.\n");
+		else
+			dev_info(dev, "MOST_BLEND: Unexpected val: %d\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_STEREO_GET, &val);
+		if (r)
+			dev_err(dev, "%s: Get STEREO fails.\n", __func__);
+		else if (val == 0)
+			dev_info(dev, "STEREO: Not detected\n");
+		else if (val == 1)
+			dev_info(dev, "STEREO: Detected\n");
+		else
+			dev_info(dev, "STEREO: Unexpected value: %d\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_RSSI_LVL_GET, &val);
+		if (r)
+			dev_err(dev, "%s: Get RSSI_LVL fails.\n", __func__);
+		else
+			dev_info(dev, "RX signal strength: %d\n", (s16) val);
+
+		r = wl1273_fm_read_reg(core, WL1273_POWER_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get POWER fails.\n", __func__);
+		else
+			dev_info(dev, "POWER: 0x%04x\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_INT_MASK_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get INT_MASK fails.\n", __func__);
+		else
+			dev_info(dev, "INT_MASK: 0x%04x\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_RDS_SYNC_GET, &val);
+		if (r)
+			dev_err(dev, "%s: Get RDS_SYNC fails.\n",
+				__func__);
+		else if (val == 0)
+			dev_info(dev, "RDS_SYNC: Not synchronized\n");
+
+		else if (val == 1)
+			dev_info(dev, "RDS_SYNC: Synchronized\n");
+		else
+			dev_info(dev, "RDS_SYNC: Unexpected value: %d\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_I2S_MODE_CONFIG_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get I2S_MODE_CONFIG fails.\n",
+				__func__);
+		else
+			dev_info(dev, "I2S_MODE_CONFIG: 0x%04x\n", val);
+
+		r = wl1273_fm_read_reg(core, WL1273_VOLUME_SET, &val);
+		if (r)
+			dev_err(dev, "%s: Get VOLUME fails.\n", __func__);
+		else
+			dev_info(dev, "VOLUME: 0x%04x\n", val);
+	}
+
+	return 0;
+}
+
+static void wl1273_vdev_release(struct video_device *dev)
+{
+}
+
+static const struct v4l2_ctrl_ops wl1273_ctrl_ops = {
+	.s_ctrl = wl1273_fm_vidioc_s_ctrl,
+	.g_volatile_ctrl = wl1273_fm_g_volatile_ctrl,
+};
+
+static const struct v4l2_ioctl_ops wl1273_ioctl_ops = {
+	.vidioc_querycap	= wl1273_fm_vidioc_querycap,
+	.vidioc_g_input		= wl1273_fm_vidioc_g_input,
+	.vidioc_s_input		= wl1273_fm_vidioc_s_input,
+	.vidioc_g_audio		= wl1273_fm_vidioc_g_audio,
+	.vidioc_s_audio		= wl1273_fm_vidioc_s_audio,
+	.vidioc_g_tuner		= wl1273_fm_vidioc_g_tuner,
+	.vidioc_s_tuner		= wl1273_fm_vidioc_s_tuner,
+	.vidioc_g_frequency	= wl1273_fm_vidioc_g_frequency,
+	.vidioc_s_frequency	= wl1273_fm_vidioc_s_frequency,
+	.vidioc_s_hw_freq_seek	= wl1273_fm_vidioc_s_hw_freq_seek,
+	.vidioc_g_modulator	= wl1273_fm_vidioc_g_modulator,
+	.vidioc_s_modulator	= wl1273_fm_vidioc_s_modulator,
+	.vidioc_log_status      = wl1273_fm_vidioc_log_status,
+};
+
+static struct video_device wl1273_viddev_template = {
+	.fops			= &wl1273_fops,
+	.ioctl_ops		= &wl1273_ioctl_ops,
+	.name			= WL1273_FM_DRIVER_NAME,
+	.release		= wl1273_vdev_release,
+};
+
+static int wl1273_fm_radio_remove(struct platform_device *pdev)
+{
+	struct wl1273_device *radio = platform_get_drvdata(pdev);
+	struct wl1273_core *core = radio->core;
+
+	dev_info(&pdev->dev, "%s.\n", __func__);
+
+	free_irq(core->client->irq, radio);
+	core->pdata->free_resources();
+
+	v4l2_ctrl_handler_free(&radio->ctrl_handler);
+	video_unregister_device(&radio->videodev);
+	v4l2_device_unregister(&radio->v4l2dev);
+	kfree(radio->buffer);
+	kfree(radio->write_buf);
+	kfree(radio);
+
+	return 0;
+}
+
+static int __devinit wl1273_fm_radio_probe(struct platform_device *pdev)
+{
+	struct wl1273_core **core = pdev->dev.platform_data;
+	struct wl1273_device *radio;
+	struct v4l2_ctrl *ctrl;
+	int r = 0;
+
+	pr_debug("%s\n", __func__);
+
+	if (!core) {
+		dev_err(&pdev->dev, "No platform data.\n");
+		r = -EINVAL;
+		goto pdata_err;
+	}
+
+	radio = kzalloc(sizeof(*radio), GFP_KERNEL);
+	if (!radio) {
+		r = -ENOMEM;
+		goto pdata_err;
+	}
+
+	/* RDS buffer allocation */
+	radio->buf_size = rds_buf * RDS_BLOCK_SIZE;
+	radio->buffer = kmalloc(radio->buf_size, GFP_KERNEL);
+	if (!radio->buffer) {
+		pr_err("Cannot allocate memory for RDS buffer.\n");
+		r = -ENOMEM;
+		goto err_kmalloc;
+	}
+
+	radio->core = *core;
+	radio->irq_flags = WL1273_IRQ_MASK;
+	radio->dev = &radio->core->client->dev;
+	radio->rds_on = false;
+	radio->core->mode = WL1273_MODE_OFF;
+	radio->tx_power = 118;
+	radio->core->audio_mode = WL1273_AUDIO_ANALOG;
+	radio->band = WL1273_BAND_OTHER;
+	radio->core->i2s_mode = WL1273_I2S_DEF_MODE;
+	radio->core->channel_number = 2;
+	radio->core->volume = WL1273_DEFAULT_VOLUME;
+	radio->rx_frequency = WL1273_BAND_OTHER_LOW;
+	radio->tx_frequency = WL1273_BAND_OTHER_HIGH;
+	radio->rangelow = WL1273_BAND_OTHER_LOW;
+	radio->rangehigh = WL1273_BAND_OTHER_HIGH;
+	radio->stereo = true;
+	radio->bus_type = "I2C";
+
+	radio->core->write = wl1273_fm_write_cmd;
+	radio->core->set_audio = wl1273_fm_set_audio;
+	radio->core->set_volume = wl1273_fm_set_volume;
+
+	if (radio->core->pdata->request_resources) {
+		r = radio->core->pdata->request_resources(radio->core->client);
+		if (r) {
+			dev_err(radio->dev, WL1273_FM_DRIVER_NAME
+				": Cannot get platform data\n");
+			goto err_resources;
+		}
+
+		dev_dbg(radio->dev, "irq: %d\n", radio->core->client->irq);
+
+		r = request_threaded_irq(radio->core->client->irq, NULL,
+					 wl1273_fm_irq_thread_handler,
+					 IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
+					 "wl1273-fm", radio);
+		if (r < 0) {
+			dev_err(radio->dev, WL1273_FM_DRIVER_NAME
+				": Unable to register IRQ handler: %d\n", r);
+			goto err_request_irq;
+		}
+	} else {
+		dev_err(radio->dev, WL1273_FM_DRIVER_NAME ": Core WL1273 IRQ"
+			" not configured");
+		r = -EINVAL;
+		goto err_resources;
+	}
+
+	init_completion(&radio->busy);
+	init_waitqueue_head(&radio->read_queue);
+
+	radio->write_buf = kmalloc(256, GFP_KERNEL);
+	if (!radio->write_buf) {
+		r = -ENOMEM;
+		goto write_buf_err;
+	}
+
+	radio->dev = &pdev->dev;
+	radio->v4l2dev.ctrl_handler = &radio->ctrl_handler;
+	radio->rds_users = 0;
+
+	r = v4l2_device_register(&pdev->dev, &radio->v4l2dev);
+	if (r) {
+		dev_err(&pdev->dev, "Cannot register v4l2_device.\n");
+		goto device_register_err;
+	}
+
+	/* V4L2 configuration */
+	memcpy(&radio->videodev, &wl1273_viddev_template,
+	       sizeof(wl1273_viddev_template));
+
+	radio->videodev.v4l2_dev = &radio->v4l2dev;
+
+	v4l2_ctrl_handler_init(&radio->ctrl_handler, 6);
+
+	/* add in ascending ID order */
+	v4l2_ctrl_new_std(&radio->ctrl_handler, &wl1273_ctrl_ops,
+			  V4L2_CID_AUDIO_VOLUME, 0, WL1273_MAX_VOLUME, 1,
+			  WL1273_DEFAULT_VOLUME);
+
+	v4l2_ctrl_new_std(&radio->ctrl_handler, &wl1273_ctrl_ops,
+			  V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+
+	v4l2_ctrl_new_std_menu(&radio->ctrl_handler, &wl1273_ctrl_ops,
+			       V4L2_CID_TUNE_PREEMPHASIS,
+			       V4L2_PREEMPHASIS_75_uS, 0x03,
+			       V4L2_PREEMPHASIS_50_uS);
+
+	v4l2_ctrl_new_std(&radio->ctrl_handler, &wl1273_ctrl_ops,
+			  V4L2_CID_TUNE_POWER_LEVEL, 91, 122, 1, 118);
+
+	ctrl = v4l2_ctrl_new_std(&radio->ctrl_handler, &wl1273_ctrl_ops,
+				 V4L2_CID_TUNE_ANTENNA_CAPACITOR,
+				 0, 255, 1, 255);
+	if (ctrl)
+		ctrl->is_volatile = 1;
+
+	if (radio->ctrl_handler.error) {
+		r = radio->ctrl_handler.error;
+		dev_err(&pdev->dev, "Ctrl handler error: %d\n", r);
+		goto handler_init_err;
+	}
+
+	video_set_drvdata(&radio->videodev, radio);
+	platform_set_drvdata(pdev, radio);
+
+	/* register video device */
+	r = video_register_device(&radio->videodev, VFL_TYPE_RADIO, radio_nr);
+	if (r) {
+		dev_err(&pdev->dev, WL1273_FM_DRIVER_NAME
+			": Could not register video device\n");
+		goto handler_init_err;
+	}
+
+	return 0;
+
+handler_init_err:
+	v4l2_ctrl_handler_free(&radio->ctrl_handler);
+	v4l2_device_unregister(&radio->v4l2dev);
+device_register_err:
+	kfree(radio->write_buf);
+write_buf_err:
+	free_irq(radio->core->client->irq, radio);
+err_request_irq:
+	radio->core->pdata->free_resources();
+err_resources:
+	kfree(radio->buffer);
+err_kmalloc:
+	kfree(radio);
+pdata_err:
+	return r;
+}
+
+MODULE_ALIAS("platform:wl1273_fm_radio");
+
+static struct platform_driver wl1273_fm_radio_driver = {
+	.probe		= wl1273_fm_radio_probe,
+	.remove		= __devexit_p(wl1273_fm_radio_remove),
+	.driver		= {
+		.name	= "wl1273_fm_radio",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init wl1273_fm_module_init(void)
+{
+	pr_info("%s\n", __func__);
+	return platform_driver_register(&wl1273_fm_radio_driver);
+}
+module_init(wl1273_fm_module_init);
+
+static void __exit wl1273_fm_module_exit(void)
+{
+	flush_scheduled_work();
+	platform_driver_unregister(&wl1273_fm_radio_driver);
+	pr_info(DRIVER_DESC ", Exiting.\n");
+}
+module_exit(wl1273_fm_module_exit);
+
+MODULE_AUTHOR("Matti Aaltonen <matti.j.aaltonen@nokia.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
index f31eab99c94..af99c5bd88c 100644
--- a/drivers/media/radio/radio-zoltrix.c
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -377,7 +377,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 static const struct v4l2_file_operations zoltrix_fops =
 {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops zoltrix_ioctl_ops = {
@@ -424,20 +424,6 @@ static int __init zoltrix_init(void)
 		return res;
 	}
 
-	strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name));
-	zol->vdev.v4l2_dev = v4l2_dev;
-	zol->vdev.fops = &zoltrix_fops;
-	zol->vdev.ioctl_ops = &zoltrix_ioctl_ops;
-	zol->vdev.release = video_device_release_empty;
-	video_set_drvdata(&zol->vdev, zol);
-
-	if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(v4l2_dev);
-		release_region(zol->io, 2);
-		return -EINVAL;
-	}
-	v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n");
-
 	mutex_init(&zol->lock);
 
 	/* mute card - prevents noisy bootups */
@@ -452,6 +438,20 @@ static int __init zoltrix_init(void)
 	zol->curvol = 0;
 	zol->stereo = 1;
 
+	strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name));
+	zol->vdev.v4l2_dev = v4l2_dev;
+	zol->vdev.fops = &zoltrix_fops;
+	zol->vdev.ioctl_ops = &zoltrix_ioctl_ops;
+	zol->vdev.release = video_device_release_empty;
+	video_set_drvdata(&zol->vdev, zol);
+
+	if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_device_unregister(v4l2_dev);
+		release_region(zol->io, 2);
+		return -EINVAL;
+	}
+	v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n");
+
 	return 0;
 }
 
diff --git a/drivers/media/radio/si470x/radio-si470x.h b/drivers/media/radio/si470x/radio-si470x.h
index ea12782359a..4a4e908db04 100644
--- a/drivers/media/radio/si470x/radio-si470x.h
+++ b/drivers/media/radio/si470x/radio-si470x.h
@@ -31,14 +31,12 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/input.h>
 #include <linux/version.h>
 #include <linux/videodev2.h>
 #include <linux/mutex.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
-#include <media/rds.h>
 #include <asm/unaligned.h>
 
 
diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c
index a6e6f1987a3..0fab6f8f7e2 100644
--- a/drivers/media/radio/si4713-i2c.c
+++ b/drivers/media/radio/si4713-i2c.c
@@ -27,6 +27,8 @@
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-common.h>
@@ -43,6 +45,11 @@ MODULE_AUTHOR("Eduardo Valentin <eduardo.valentin@nokia.com>");
 MODULE_DESCRIPTION("I2C driver for Si4713 FM Radio Transmitter");
 MODULE_VERSION("0.0.1");
 
+static const char *si4713_supply_names[SI4713_NUM_SUPPLIES] = {
+	"vio",
+	"vdd",
+};
+
 #define DEFAULT_RDS_PI			0x00
 #define DEFAULT_RDS_PTY			0x00
 #define DEFAULT_RDS_PS_NAME		""
@@ -369,7 +376,17 @@ static int si4713_powerup(struct si4713_device *sdev)
 	if (sdev->power_state)
 		return 0;
 
-	sdev->platform_data->set_power(1);
+	err = regulator_bulk_enable(ARRAY_SIZE(sdev->supplies),
+				    sdev->supplies);
+	if (err) {
+		v4l2_err(&sdev->sd, "Failed to enable supplies: %d\n", err);
+		return err;
+	}
+	if (gpio_is_valid(sdev->gpio_reset)) {
+		udelay(50);
+		gpio_set_value(sdev->gpio_reset, 1);
+	}
+
 	err = si4713_send_command(sdev, SI4713_CMD_POWER_UP,
 					args, ARRAY_SIZE(args),
 					resp, ARRAY_SIZE(resp),
@@ -384,7 +401,13 @@ static int si4713_powerup(struct si4713_device *sdev)
 		err = si4713_write_property(sdev, SI4713_GPO_IEN,
 						SI4713_STC_INT | SI4713_CTS);
 	} else {
-		sdev->platform_data->set_power(0);
+		if (gpio_is_valid(sdev->gpio_reset))
+			gpio_set_value(sdev->gpio_reset, 0);
+		err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
+					     sdev->supplies);
+		if (err)
+			v4l2_err(&sdev->sd,
+				 "Failed to disable supplies: %d\n", err);
 	}
 
 	return err;
@@ -411,7 +434,13 @@ static int si4713_powerdown(struct si4713_device *sdev)
 		v4l2_dbg(1, debug, &sdev->sd, "Power down response: 0x%02x\n",
 				resp[0]);
 		v4l2_dbg(1, debug, &sdev->sd, "Device in reset mode\n");
-		sdev->platform_data->set_power(0);
+		if (gpio_is_valid(sdev->gpio_reset))
+			gpio_set_value(sdev->gpio_reset, 0);
+		err = regulator_bulk_disable(ARRAY_SIZE(sdev->supplies),
+					     sdev->supplies);
+		if (err)
+			v4l2_err(&sdev->sd,
+				 "Failed to disable supplies: %d\n", err);
 		sdev->power_state = POWER_OFF;
 	}
 
@@ -1967,7 +1996,8 @@ static int si4713_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	struct si4713_device *sdev;
-	int rval;
+	struct si4713_platform_data *pdata = client->dev.platform_data;
+	int rval, i;
 
 	sdev = kzalloc(sizeof *sdev, GFP_KERNEL);
 	if (!sdev) {
@@ -1976,11 +2006,26 @@ static int si4713_probe(struct i2c_client *client,
 		goto exit;
 	}
 
-	sdev->platform_data = client->dev.platform_data;
-	if (!sdev->platform_data) {
-		v4l2_err(&sdev->sd, "No platform data registered.\n");
-		rval = -ENODEV;
-		goto free_sdev;
+	sdev->gpio_reset = -1;
+	if (pdata && gpio_is_valid(pdata->gpio_reset)) {
+		rval = gpio_request(pdata->gpio_reset, "si4713 reset");
+		if (rval) {
+			dev_err(&client->dev,
+				"Failed to request gpio: %d\n", rval);
+			goto free_sdev;
+		}
+		sdev->gpio_reset = pdata->gpio_reset;
+		gpio_direction_output(sdev->gpio_reset, 0);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sdev->supplies); i++)
+		sdev->supplies[i].supply = si4713_supply_names[i];
+
+	rval = regulator_bulk_get(&client->dev, ARRAY_SIZE(sdev->supplies),
+				  sdev->supplies);
+	if (rval) {
+		dev_err(&client->dev, "Cannot get regulators: %d\n", rval);
+		goto free_gpio;
 	}
 
 	v4l2_i2c_subdev_init(&sdev->sd, client, &si4713_subdev_ops);
@@ -1994,7 +2039,7 @@ static int si4713_probe(struct i2c_client *client,
 			client->name, sdev);
 		if (rval < 0) {
 			v4l2_err(&sdev->sd, "Could not request IRQ\n");
-			goto free_sdev;
+			goto put_reg;
 		}
 		v4l2_dbg(1, debug, &sdev->sd, "IRQ requested.\n");
 	} else {
@@ -2012,6 +2057,11 @@ static int si4713_probe(struct i2c_client *client,
 free_irq:
 	if (client->irq)
 		free_irq(client->irq, sdev);
+put_reg:
+	regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies);
+free_gpio:
+	if (gpio_is_valid(sdev->gpio_reset))
+		gpio_free(sdev->gpio_reset);
 free_sdev:
 	kfree(sdev);
 exit:
@@ -2031,7 +2081,9 @@ static int si4713_remove(struct i2c_client *client)
 		free_irq(client->irq, sdev);
 
 	v4l2_device_unregister_subdev(sd);
-
+	regulator_bulk_free(ARRAY_SIZE(sdev->supplies), sdev->supplies);
+	if (gpio_is_valid(sdev->gpio_reset))
+		gpio_free(sdev->gpio_reset);
 	kfree(sdev);
 
 	return 0;
diff --git a/drivers/media/radio/si4713-i2c.h b/drivers/media/radio/si4713-i2c.h
index faf8cff124f..c6dfa7fb101 100644
--- a/drivers/media/radio/si4713-i2c.h
+++ b/drivers/media/radio/si4713-i2c.h
@@ -211,6 +211,8 @@ struct acomp_info {
 	u32 enabled;
 };
 
+#define SI4713_NUM_SUPPLIES		2
+
 /*
  * si4713_device - private data
  */
@@ -220,11 +222,12 @@ struct si4713_device {
 	/* private data structures */
 	struct mutex mutex;
 	struct completion work;
-	struct si4713_platform_data *platform_data;
 	struct rds_info rds_info;
 	struct limiter_info limiter_info;
 	struct pilot_info pilot_info;
 	struct acomp_info acomp_info;
+	struct regulator_bulk_data supplies[SI4713_NUM_SUPPLIES];
+	int gpio_reset;
 	u32 frequency;
 	u32 preemphasis;
 	u32 mute;
diff --git a/drivers/media/IR/Kconfig b/drivers/media/rc/Kconfig
index aa4163eb7a8..3785162f928 100644
--- a/drivers/media/IR/Kconfig
+++ b/drivers/media/rc/Kconfig
@@ -1,21 +1,17 @@
-menuconfig IR_CORE
-	tristate "Infrared remote controller adapters"
+menuconfig RC_CORE
+	tristate "Remote Controller adapters"
 	depends on INPUT
 	default INPUT
 	---help---
 	  Enable support for Remote Controllers on Linux. This is
 	  needed in order to support several video capture adapters.
+	  Currently, all supported devices use InfraRed.
 
 	  Enable this option if you have a video capture board even
 	  if you don't need IR, as otherwise, you may not be able to
 	  compile the driver for your adapter.
 
-config VIDEO_IR
-	tristate
-	depends on IR_CORE
-	default IR_CORE
-
-if IR_CORE
+if RC_CORE
 
 config LIRC
 	tristate
@@ -28,11 +24,11 @@ config LIRC
 	   LIRC daemon handles protocol decoding for IR reception and
 	   encoding for IR transmitting (aka "blasting").
 
-source "drivers/media/IR/keymaps/Kconfig"
+source "drivers/media/rc/keymaps/Kconfig"
 
 config IR_NEC_DECODER
 	tristate "Enable IR raw decoder for the NEC protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -42,7 +38,7 @@ config IR_NEC_DECODER
 
 config IR_RC5_DECODER
 	tristate "Enable IR raw decoder for the RC-5 protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -52,7 +48,7 @@ config IR_RC5_DECODER
 
 config IR_RC6_DECODER
 	tristate "Enable IR raw decoder for the RC6 protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -62,7 +58,7 @@ config IR_RC6_DECODER
 
 config IR_JVC_DECODER
 	tristate "Enable IR raw decoder for the JVC protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -72,7 +68,7 @@ config IR_JVC_DECODER
 
 config IR_SONY_DECODER
 	tristate "Enable IR raw decoder for the Sony protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	default y
 
 	---help---
@@ -81,7 +77,7 @@ config IR_SONY_DECODER
 
 config IR_RC5_SZ_DECODER
 	tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
-	depends on IR_CORE
+	depends on RC_CORE
 	select BITREVERSE
 	default y
 
@@ -93,7 +89,7 @@ config IR_RC5_SZ_DECODER
 
 config IR_LIRC_CODEC
 	tristate "Enable IR to LIRC bridge"
-	depends on IR_CORE
+	depends on RC_CORE
 	depends on LIRC
 	default y
 
@@ -104,7 +100,7 @@ config IR_LIRC_CODEC
 config IR_ENE
 	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
 	depends on PNP
-	depends on IR_CORE
+	depends on RC_CORE
 	---help---
 	   Say Y here to enable support for integrated infrared receiver
 	   /transceiver made by ENE.
@@ -118,7 +114,7 @@ config IR_ENE
 config IR_IMON
 	tristate "SoundGraph iMON Receiver and Display"
 	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
+	depends on RC_CORE
 	select USB
 	---help---
 	   Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
@@ -130,7 +126,7 @@ config IR_IMON
 config IR_MCEUSB
 	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
 	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
+	depends on RC_CORE
 	select USB
 	---help---
 	   Say Y here if you want to use a Windows Media Center Edition
@@ -142,7 +138,7 @@ config IR_MCEUSB
 config IR_NUVOTON
 	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
 	depends on PNP
-	depends on IR_CORE
+	depends on RC_CORE
 	---help---
 	   Say Y here to enable support for integrated infrared receiver
 	   /transciever made by Nuvoton (formerly Winbond). This chip is
@@ -155,7 +151,7 @@ config IR_NUVOTON
 config IR_STREAMZAP
 	tristate "Streamzap PC Remote IR Receiver"
 	depends on USB_ARCH_HAS_HCD
-	depends on IR_CORE
+	depends on RC_CORE
 	select USB
 	---help---
 	   Say Y here if you want to use a Streamzap PC Remote
@@ -164,4 +160,34 @@ config IR_STREAMZAP
 	   To compile this driver as a module, choose M here: the
 	   module will be called streamzap.
 
-endif #IR_CORE
+config IR_WINBOND_CIR
+        tristate "Winbond IR remote control"
+        depends on X86 && PNP
+	depends on RC_CORE
+        select NEW_LEDS
+        select LEDS_CLASS
+        select LEDS_TRIGGERS
+        select BITREVERSE
+	---help---
+           Say Y here if you want to use the IR remote functionality found
+           in some Winbond SuperI/O chips. Currently only the WPCD376I
+           chip is supported (included in some Intel Media series
+	   motherboards).
+
+           To compile this driver as a module, choose M here: the module will
+	   be called winbond_cir.
+
+config RC_LOOPBACK
+	tristate "Remote Control Loopback Driver"
+	depends on RC_CORE
+	---help---
+	   Say Y here if you want support for the remote control loopback
+	   driver which allows TX data to be sent back as RX data.
+	   This is mostly useful for debugging purposes.
+
+	   If you're not sure, select N here.
+
+	   To compile this driver as a module, choose M here: the module will
+	   be called rc_loopback.
+
+endif #RC_CORE
diff --git a/drivers/media/IR/Makefile b/drivers/media/rc/Makefile
index f9574adab82..67b4f7fe257 100644
--- a/drivers/media/IR/Makefile
+++ b/drivers/media/rc/Makefile
@@ -1,10 +1,8 @@
-ir-common-objs  := ir-functions.o
-ir-core-objs	:= ir-keytable.o ir-sysfs.o ir-raw-event.o rc-map.o
+rc-core-objs	:= rc-main.o ir-raw.o
 
 obj-y += keymaps/
 
-obj-$(CONFIG_IR_CORE) += ir-core.o
-obj-$(CONFIG_VIDEO_IR) += ir-common.o
+obj-$(CONFIG_RC_CORE) += rc-core.o
 obj-$(CONFIG_LIRC) += lirc_dev.o
 obj-$(CONFIG_IR_NEC_DECODER) += ir-nec-decoder.o
 obj-$(CONFIG_IR_RC5_DECODER) += ir-rc5-decoder.o
@@ -20,3 +18,5 @@ obj-$(CONFIG_IR_MCEUSB) += mceusb.o
 obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o
 obj-$(CONFIG_IR_ENE) += ene_ir.o
 obj-$(CONFIG_IR_STREAMZAP) += streamzap.o
+obj-$(CONFIG_IR_WINBOND_CIR) += winbond-cir.o
+obj-$(CONFIG_RC_LOOPBACK) += rc-loopback.o
diff --git a/drivers/media/IR/ene_ir.c b/drivers/media/rc/ene_ir.c
index 7637babcd26..80b3c319f69 100644
--- a/drivers/media/IR/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -37,9 +37,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/input.h>
-#include <media/ir-core.h>
-#include <media/ir-common.h>
+#include <media/rc-core.h>
 #include "ene_ir.h"
 
 static int sample_period;
@@ -357,7 +355,7 @@ void ene_rx_sense_carrier(struct ene_device *dev)
 		ev.carrier_report = true;
 		ev.carrier = carrier;
 		ev.duty_cycle = duty_cycle;
-		ir_raw_event_store(dev->idev, &ev);
+		ir_raw_event_store(dev->rdev, &ev);
 	}
 }
 
@@ -448,32 +446,32 @@ static void ene_rx_setup(struct ene_device *dev)
 
 select_timeout:
 	if (dev->rx_fan_input_inuse) {
-		dev->props->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
+		dev->rdev->rx_resolution = MS_TO_NS(ENE_FW_SAMPLE_PERIOD_FAN);
 
 		/* Fan input doesn't support timeouts, it just ends the
 			input with a maximum sample */
-		dev->props->min_timeout = dev->props->max_timeout =
+		dev->rdev->min_timeout = dev->rdev->max_timeout =
 			MS_TO_NS(ENE_FW_SMPL_BUF_FAN_MSK *
 				ENE_FW_SAMPLE_PERIOD_FAN);
 	} else {
-		dev->props->rx_resolution = MS_TO_NS(sample_period);
+		dev->rdev->rx_resolution = MS_TO_NS(sample_period);
 
 		/* Theoreticly timeout is unlimited, but we cap it
 		 * because it was seen that on one device, it
 		 * would stop sending spaces after around 250 msec.
 		 * Besides, this is close to 2^32 anyway and timeout is u32.
 		 */
-		dev->props->min_timeout = MS_TO_NS(127 * sample_period);
-		dev->props->max_timeout = MS_TO_NS(200000);
+		dev->rdev->min_timeout = MS_TO_NS(127 * sample_period);
+		dev->rdev->max_timeout = MS_TO_NS(200000);
 	}
 
 	if (dev->hw_learning_and_tx_capable)
-		dev->props->tx_resolution = MS_TO_NS(sample_period);
+		dev->rdev->tx_resolution = MS_TO_NS(sample_period);
 
-	if (dev->props->timeout > dev->props->max_timeout)
-		dev->props->timeout = dev->props->max_timeout;
-	if (dev->props->timeout < dev->props->min_timeout)
-		dev->props->timeout = dev->props->min_timeout;
+	if (dev->rdev->timeout > dev->rdev->max_timeout)
+		dev->rdev->timeout = dev->rdev->max_timeout;
+	if (dev->rdev->timeout < dev->rdev->min_timeout)
+		dev->rdev->timeout = dev->rdev->min_timeout;
 }
 
 /* Enable the device for receive */
@@ -504,7 +502,7 @@ static void ene_rx_enable(struct ene_device *dev)
 	ene_set_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
 
 	/* enter idle mode */
-	ir_raw_event_set_idle(dev->idev, true);
+	ir_raw_event_set_idle(dev->rdev, true);
 	dev->rx_enabled = true;
 }
 
@@ -518,7 +516,7 @@ static void ene_rx_disable(struct ene_device *dev)
 	/* disable hardware IRQ and firmware flag */
 	ene_clear_reg_mask(dev, ENE_FW1, ENE_FW1_ENABLE | ENE_FW1_IRQ);
 
-	ir_raw_event_set_idle(dev->idev, true);
+	ir_raw_event_set_idle(dev->rdev, true);
 	dev->rx_enabled = false;
 }
 
@@ -805,10 +803,10 @@ static irqreturn_t ene_isr(int irq, void *data)
 
 		ev.duration = MS_TO_NS(hw_sample);
 		ev.pulse = pulse;
-		ir_raw_event_store_with_filter(dev->idev, &ev);
+		ir_raw_event_store_with_filter(dev->rdev, &ev);
 	}
 
-	ir_raw_event_handle(dev->idev);
+	ir_raw_event_handle(dev->rdev);
 unlock:
 	spin_unlock_irqrestore(&dev->hw_lock, flags);
 	return retval;
@@ -823,7 +821,7 @@ static void ene_setup_default_settings(struct ene_device *dev)
 	dev->learning_mode_enabled = learning_mode_force;
 
 	/* Set reasonable default timeout */
-	dev->props->timeout = MS_TO_NS(150000);
+	dev->rdev->timeout = MS_TO_NS(150000);
 }
 
 /* Upload all hardware settings at once. Used at load and resume time */
@@ -838,9 +836,9 @@ static void ene_setup_hw_settings(struct ene_device *dev)
 }
 
 /* outside interface: called on first open*/
-static int ene_open(void *data)
+static int ene_open(struct rc_dev *rdev)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dev->hw_lock, flags);
@@ -850,9 +848,9 @@ static int ene_open(void *data)
 }
 
 /* outside interface: called on device close*/
-static void ene_close(void *data)
+static void ene_close(struct rc_dev *rdev)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 	spin_lock_irqsave(&dev->hw_lock, flags);
 
@@ -861,9 +859,9 @@ static void ene_close(void *data)
 }
 
 /* outside interface: set transmitter mask */
-static int ene_set_tx_mask(void *data, u32 tx_mask)
+static int ene_set_tx_mask(struct rc_dev *rdev, u32 tx_mask)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	dbg("TX: attempt to set transmitter mask %02x", tx_mask);
 
 	/* invalid txmask */
@@ -879,9 +877,9 @@ static int ene_set_tx_mask(void *data, u32 tx_mask)
 }
 
 /* outside interface : set tx carrier */
-static int ene_set_tx_carrier(void *data, u32 carrier)
+static int ene_set_tx_carrier(struct rc_dev *rdev, u32 carrier)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	u32 period = 2000000 / carrier;
 
 	dbg("TX: attempt to set tx carrier to %d kHz", carrier);
@@ -900,9 +898,9 @@ static int ene_set_tx_carrier(void *data, u32 carrier)
 }
 
 /*outside interface : set tx duty cycle */
-static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle)
+static int ene_set_tx_duty_cycle(struct rc_dev *rdev, u32 duty_cycle)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	dbg("TX: setting duty cycle to %d%%", duty_cycle);
 	dev->tx_duty_cycle = duty_cycle;
 	ene_tx_set_carrier(dev);
@@ -910,9 +908,9 @@ static int ene_set_tx_duty_cycle(void *data, u32 duty_cycle)
 }
 
 /* outside interface: enable learning mode */
-static int ene_set_learning_mode(void *data, int enable)
+static int ene_set_learning_mode(struct rc_dev *rdev, int enable)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 	if (enable == dev->learning_mode_enabled)
 		return 0;
@@ -926,9 +924,9 @@ static int ene_set_learning_mode(void *data, int enable)
 	return 0;
 }
 
-static int ene_set_carrier_report(void *data, int enable)
+static int ene_set_carrier_report(struct rc_dev *rdev, int enable)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 
 	if (enable == dev->carrier_detect_enabled)
@@ -944,18 +942,20 @@ static int ene_set_carrier_report(void *data, int enable)
 }
 
 /* outside interface: enable or disable idle mode */
-static void ene_set_idle(void *data, bool idle)
+static void ene_set_idle(struct rc_dev *rdev, bool idle)
 {
+	struct ene_device *dev = rdev->priv;
+
 	if (idle) {
-		ene_rx_reset((struct ene_device *)data);
+		ene_rx_reset(dev);
 		dbg("RX: end of data");
 	}
 }
 
 /* outside interface: transmit */
-static int ene_transmit(void *data, int *buf, u32 n)
+static int ene_transmit(struct rc_dev *rdev, int *buf, u32 n)
 {
-	struct ene_device *dev = (struct ene_device *)data;
+	struct ene_device *dev = rdev->priv;
 	unsigned long flags;
 
 	dev->tx_buffer = buf;
@@ -992,16 +992,13 @@ static int ene_transmit(void *data, int *buf, u32 n)
 static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 {
 	int error = -ENOMEM;
-	struct ir_dev_props *ir_props;
-	struct input_dev *input_dev;
+	struct rc_dev *rdev;
 	struct ene_device *dev;
 
 	/* allocate memory */
-	input_dev = input_allocate_device();
-	ir_props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
 	dev = kzalloc(sizeof(struct ene_device), GFP_KERNEL);
-
-	if (!input_dev || !ir_props || !dev)
+	rdev = rc_allocate_device();
+	if (!dev || !rdev)
 		goto error1;
 
 	/* validate resources */
@@ -1054,24 +1051,25 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 	if (!dev->hw_learning_and_tx_capable)
 		learning_mode_force = false;
 
-	ir_props->driver_type = RC_DRIVER_IR_RAW;
-	ir_props->allowed_protos = IR_TYPE_ALL;
-	ir_props->priv = dev;
-	ir_props->open = ene_open;
-	ir_props->close = ene_close;
-	ir_props->s_idle = ene_set_idle;
-
-	dev->props = ir_props;
-	dev->idev = input_dev;
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+	rdev->allowed_protos = RC_TYPE_ALL;
+	rdev->priv = dev;
+	rdev->open = ene_open;
+	rdev->close = ene_close;
+	rdev->s_idle = ene_set_idle;
+	rdev->driver_name = ENE_DRIVER_NAME;
+	rdev->map_name = RC_MAP_RC6_MCE;
+	rdev->input_name = "ENE eHome Infrared Remote Receiver";
 
 	if (dev->hw_learning_and_tx_capable) {
-		ir_props->s_learning_mode = ene_set_learning_mode;
+		rdev->s_learning_mode = ene_set_learning_mode;
 		init_completion(&dev->tx_complete);
-		ir_props->tx_ir = ene_transmit;
-		ir_props->s_tx_mask = ene_set_tx_mask;
-		ir_props->s_tx_carrier = ene_set_tx_carrier;
-		ir_props->s_tx_duty_cycle = ene_set_tx_duty_cycle;
-		ir_props->s_carrier_report = ene_set_carrier_report;
+		rdev->tx_ir = ene_transmit;
+		rdev->s_tx_mask = ene_set_tx_mask;
+		rdev->s_tx_carrier = ene_set_tx_carrier;
+		rdev->s_tx_duty_cycle = ene_set_tx_duty_cycle;
+		rdev->s_carrier_report = ene_set_carrier_report;
+		rdev->input_name = "ENE eHome Infrared Remote Transceiver";
 	}
 
 	ene_rx_setup_hw_buffer(dev);
@@ -1081,16 +1079,11 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
 	device_set_wakeup_capable(&pnp_dev->dev, true);
 	device_set_wakeup_enable(&pnp_dev->dev, true);
 
-	if (dev->hw_learning_and_tx_capable)
-		input_dev->name = "ENE eHome Infrared Remote Transceiver";
-	else
-		input_dev->name = "ENE eHome Infrared Remote Receiver";
-
-	error = -ENODEV;
-	if (ir_input_register(input_dev, RC_MAP_RC6_MCE, ir_props,
-							ENE_DRIVER_NAME))
+	error = rc_register_device(rdev);
+	if (error < 0)
 		goto error;
 
+	dev->rdev = rdev;
 	ene_notice("driver has been succesfully loaded");
 	return 0;
 error:
@@ -1099,8 +1092,7 @@ error:
 	if (dev && dev->hw_io >= 0)
 		release_region(dev->hw_io, ENE_IO_SIZE);
 error1:
-	input_free_device(input_dev);
-	kfree(ir_props);
+	rc_free_device(rdev);
 	kfree(dev);
 	return error;
 }
@@ -1118,8 +1110,7 @@ static void ene_remove(struct pnp_dev *pnp_dev)
 
 	free_irq(dev->irq, dev);
 	release_region(dev->hw_io, ENE_IO_SIZE);
-	ir_input_unregister(dev->idev);
-	kfree(dev->props);
+	rc_unregister_device(dev->rdev);
 	kfree(dev);
 }
 
diff --git a/drivers/media/IR/ene_ir.h b/drivers/media/rc/ene_ir.h
index f5870667a43..c179baf34cb 100644
--- a/drivers/media/IR/ene_ir.h
+++ b/drivers/media/rc/ene_ir.h
@@ -205,8 +205,7 @@
 
 struct ene_device {
 	struct pnp_dev *pnp_dev;
-	struct input_dev *idev;
-	struct ir_dev_props *props;
+	struct rc_dev *rdev;
 
 	/* hw IO settings */
 	long hw_io;
diff --git a/drivers/media/IR/imon.c b/drivers/media/rc/imon.c
index bc118066bc3..6811512b4e8 100644
--- a/drivers/media/IR/imon.c
+++ b/drivers/media/rc/imon.c
@@ -38,7 +38,7 @@
 #include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/usb/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include <linux/time.h>
 #include <linux/timer.h>
@@ -88,7 +88,6 @@ static ssize_t lcd_write(struct file *file, const char *buf,
 
 struct imon_context {
 	struct device *dev;
-	struct ir_dev_props *props;
 	/* Newer devices have two interfaces */
 	struct usb_device *usbdev_intf0;
 	struct usb_device *usbdev_intf1;
@@ -123,7 +122,7 @@ struct imon_context {
 	u16 vendor;			/* usb vendor ID */
 	u16 product;			/* usb product ID */
 
-	struct input_dev *rdev;		/* input device for remote */
+	struct rc_dev *rdev;		/* rc-core device for remote */
 	struct input_dev *idev;		/* input device for panel & IR mouse */
 	struct input_dev *touch;	/* input device for touchscreen */
 
@@ -132,7 +131,7 @@ struct imon_context {
 	u32 last_keycode;		/* last reported input keycode */
 	u32 rc_scancode;		/* the computed remote scancode */
 	u8 rc_toggle;			/* the computed remote toggle bit */
-	u64 ir_type;			/* iMON or MCE (RC6) IR protocol? */
+	u64 rc_type;			/* iMON or MCE (RC6) IR protocol? */
 	bool release_code;		/* some keys send a release code */
 
 	u8 display_type;		/* store the display type */
@@ -984,27 +983,27 @@ static void imon_touch_display_timeout(unsigned long data)
  * really just RC-6), but only one or the other at a time, as the signals
  * are decoded onboard the receiver.
  */
-int imon_ir_change_protocol(void *priv, u64 ir_type)
+static int imon_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 {
 	int retval;
-	struct imon_context *ictx = priv;
+	struct imon_context *ictx = rc->priv;
 	struct device *dev = ictx->dev;
 	bool pad_mouse;
 	unsigned char ir_proto_packet[] = {
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x86 };
 
-	if (ir_type && !(ir_type & ictx->props->allowed_protos))
+	if (rc_type && !(rc_type & rc->allowed_protos))
 		dev_warn(dev, "Looks like you're trying to use an IR protocol "
 			 "this device does not support\n");
 
-	switch (ir_type) {
-	case IR_TYPE_RC6:
+	switch (rc_type) {
+	case RC_TYPE_RC6:
 		dev_dbg(dev, "Configuring IR receiver for MCE protocol\n");
 		ir_proto_packet[0] = 0x01;
 		pad_mouse = false;
 		break;
-	case IR_TYPE_UNKNOWN:
-	case IR_TYPE_OTHER:
+	case RC_TYPE_UNKNOWN:
+	case RC_TYPE_OTHER:
 		dev_dbg(dev, "Configuring IR receiver for iMON protocol\n");
 		if (pad_stabilize && !nomouse)
 			pad_mouse = true;
@@ -1013,7 +1012,7 @@ int imon_ir_change_protocol(void *priv, u64 ir_type)
 			pad_mouse = false;
 		}
 		/* ir_proto_packet[0] = 0x00; // already the default */
-		ir_type = IR_TYPE_OTHER;
+		rc_type = RC_TYPE_OTHER;
 		break;
 	default:
 		dev_warn(dev, "Unsupported IR protocol specified, overriding "
@@ -1025,7 +1024,7 @@ int imon_ir_change_protocol(void *priv, u64 ir_type)
 			pad_mouse = false;
 		}
 		/* ir_proto_packet[0] = 0x00; // already the default */
-		ir_type = IR_TYPE_OTHER;
+		rc_type = RC_TYPE_OTHER;
 		break;
 	}
 
@@ -1035,7 +1034,7 @@ int imon_ir_change_protocol(void *priv, u64 ir_type)
 	if (retval)
 		goto out;
 
-	ictx->ir_type = ir_type;
+	ictx->rc_type = rc_type;
 	ictx->pad_mouse = pad_mouse;
 
 out:
@@ -1147,14 +1146,14 @@ static u32 imon_remote_key_lookup(struct imon_context *ictx, u32 scancode)
 	bool is_release_code = false;
 
 	/* Look for the initial press of a button */
-	keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+	keycode = rc_g_keycode_from_table(ictx->rdev, scancode);
 	ictx->rc_toggle = 0x0;
 	ictx->rc_scancode = scancode;
 
 	/* Look for the release of a button */
 	if (keycode == KEY_RESERVED) {
 		release = scancode & ~0x4000;
-		keycode = ir_g_keycode_from_table(ictx->rdev, release);
+		keycode = rc_g_keycode_from_table(ictx->rdev, release);
 		if (keycode != KEY_RESERVED)
 			is_release_code = true;
 	}
@@ -1183,7 +1182,7 @@ static u32 imon_mce_key_lookup(struct imon_context *ictx, u32 scancode)
 		scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT;
 
 	ictx->rc_scancode = scancode;
-	keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+	keycode = rc_g_keycode_from_table(ictx->rdev, scancode);
 
 	/* not used in mce mode, but make sure we know its false */
 	ictx->release_code = false;
@@ -1307,7 +1306,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
 		rel_x = buf[2];
 		rel_y = buf[3];
 
-		if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
+		if (ictx->rc_type == RC_TYPE_OTHER && pad_stabilize) {
 			if ((buf[1] == 0) && ((rel_x != 0) || (rel_y != 0))) {
 				dir = stabilize((int)rel_x, (int)rel_y,
 						timeout, threshold);
@@ -1374,7 +1373,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
 		buf[0] = 0x01;
 		buf[1] = buf[4] = buf[5] = buf[6] = buf[7] = 0;
 
-		if (ictx->ir_type == IR_TYPE_OTHER && pad_stabilize) {
+		if (ictx->rc_type == RC_TYPE_OTHER && pad_stabilize) {
 			dir = stabilize((int)rel_x, (int)rel_y,
 					timeout, threshold);
 			if (!dir) {
@@ -1479,17 +1478,12 @@ static void imon_incoming_packet(struct imon_context *ictx,
 	bool norelease = false;
 	int i;
 	u64 scancode;
-	struct input_dev *rdev = NULL;
-	struct ir_input_dev *irdev = NULL;
 	int press_type = 0;
 	int msec;
 	struct timeval t;
 	static struct timeval prev_time = { 0, 0 };
 	u8 ktype;
 
-	rdev = ictx->rdev;
-	irdev = input_get_drvdata(rdev);
-
 	/* filter out junk data on the older 0xffdc imon devices */
 	if ((buf[0] == 0xff) && (buf[1] == 0xff) && (buf[2] == 0xff))
 		return;
@@ -1501,7 +1495,7 @@ static void imon_incoming_packet(struct imon_context *ictx,
 		kc = imon_panel_key_lookup(scancode);
 	} else {
 		scancode = be32_to_cpu(*((u32 *)buf));
-		if (ictx->ir_type == IR_TYPE_RC6) {
+		if (ictx->rc_type == RC_TYPE_RC6) {
 			ktype = IMON_KEY_IMON;
 			if (buf[0] == 0x80)
 				ktype = IMON_KEY_MCE;
@@ -1570,9 +1564,9 @@ static void imon_incoming_packet(struct imon_context *ictx,
 
 	if (ktype != IMON_KEY_PANEL) {
 		if (press_type == 0)
-			ir_keyup(irdev);
+			rc_keyup(ictx->rdev);
 		else {
-			ir_keydown(rdev, ictx->rc_scancode, ictx->rc_toggle);
+			rc_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
 			spin_lock_irqsave(&ictx->kc_lock, flags);
 			ictx->last_keycode = ictx->kc;
 			spin_unlock_irqrestore(&ictx->kc_lock, flags);
@@ -1715,7 +1709,7 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 {
 	u8 ffdc_cfg_byte = ictx->usb_rx_buf[6];
 	u8 detected_display_type = IMON_DISPLAY_TYPE_NONE;
-	u64 allowed_protos = IR_TYPE_OTHER;
+	u64 allowed_protos = RC_TYPE_OTHER;
 
 	switch (ffdc_cfg_byte) {
 	/* iMON Knob, no display, iMON IR + vol knob */
@@ -1744,13 +1738,13 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 	case 0x9e:
 		dev_info(ictx->dev, "0xffdc iMON VFD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_VFD;
-		allowed_protos = IR_TYPE_RC6;
+		allowed_protos = RC_TYPE_RC6;
 		break;
 	/* iMON LCD, MCE IR */
 	case 0x9f:
 		dev_info(ictx->dev, "0xffdc iMON LCD, MCE IR");
 		detected_display_type = IMON_DISPLAY_TYPE_LCD;
-		allowed_protos = IR_TYPE_RC6;
+		allowed_protos = RC_TYPE_RC6;
 		break;
 	default:
 		dev_info(ictx->dev, "Unknown 0xffdc device, "
@@ -1762,8 +1756,8 @@ static void imon_get_ffdc_type(struct imon_context *ictx)
 	printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte);
 
 	ictx->display_type = detected_display_type;
-	ictx->props->allowed_protos = allowed_protos;
-	ictx->ir_type = allowed_protos;
+	ictx->rdev->allowed_protos = allowed_protos;
+	ictx->rc_type = allowed_protos;
 }
 
 static void imon_set_display_type(struct imon_context *ictx)
@@ -1816,18 +1810,15 @@ static void imon_set_display_type(struct imon_context *ictx)
 	ictx->display_type = configured_display_type;
 }
 
-static struct input_dev *imon_init_rdev(struct imon_context *ictx)
+static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
 {
-	struct input_dev *rdev;
-	struct ir_dev_props *props;
+	struct rc_dev *rdev;
 	int ret;
-	char *ir_codes = NULL;
 	const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
 					    0x00, 0x00, 0x00, 0x88 };
 
-	rdev = input_allocate_device();
-	props = kzalloc(sizeof(*props), GFP_KERNEL);
-	if (!rdev || !props) {
+	rdev = rc_allocate_device();
+	if (!rdev) {
 		dev_err(ictx->dev, "remote control dev allocation failed\n");
 		goto out;
 	}
@@ -1838,18 +1829,20 @@ static struct input_dev *imon_init_rdev(struct imon_context *ictx)
 		      sizeof(ictx->phys_rdev));
 	strlcat(ictx->phys_rdev, "/input0", sizeof(ictx->phys_rdev));
 
-	rdev->name = ictx->name_rdev;
-	rdev->phys = ictx->phys_rdev;
-	usb_to_input_id(ictx->usbdev_intf0, &rdev->id);
+	rdev->input_name = ictx->name_rdev;
+	rdev->input_phys = ictx->phys_rdev;
+	usb_to_input_id(ictx->usbdev_intf0, &rdev->input_id);
 	rdev->dev.parent = ictx->dev;
-	rdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-	input_set_drvdata(rdev, ictx);
 
-	props->priv = ictx;
-	props->driver_type = RC_DRIVER_SCANCODE;
-	props->allowed_protos = IR_TYPE_OTHER | IR_TYPE_RC6; /* iMON PAD or MCE */
-	props->change_protocol = imon_ir_change_protocol;
-	ictx->props = props;
+	rdev->priv = ictx;
+	rdev->driver_type = RC_DRIVER_SCANCODE;
+	rdev->allowed_protos = RC_TYPE_OTHER | RC_TYPE_RC6; /* iMON PAD or MCE */
+	rdev->change_protocol = imon_ir_change_protocol;
+	rdev->driver_name = MOD_NAME;
+	if (ictx->rc_type == RC_TYPE_RC6)
+		rdev->map_name = RC_MAP_IMON_MCE;
+	else
+		rdev->map_name = RC_MAP_IMON_PAD;
 
 	/* Enable front-panel buttons and/or knobs */
 	memcpy(ictx->usb_tx_buf, &fp_packet, sizeof(fp_packet));
@@ -1863,12 +1856,7 @@ static struct input_dev *imon_init_rdev(struct imon_context *ictx)
 
 	imon_set_display_type(ictx);
 
-	if (ictx->ir_type == IR_TYPE_RC6)
-		ir_codes = RC_MAP_IMON_MCE;
-	else
-		ir_codes = RC_MAP_IMON_PAD;
-
-	ret = ir_input_register(rdev, ir_codes, props, MOD_NAME);
+	ret = rc_register_device(rdev);
 	if (ret < 0) {
 		dev_err(ictx->dev, "remote input dev register failed\n");
 		goto out;
@@ -1877,8 +1865,7 @@ static struct input_dev *imon_init_rdev(struct imon_context *ictx)
 	return rdev;
 
 out:
-	kfree(props);
-	input_free_device(rdev);
+	rc_free_device(rdev);
 	return NULL;
 }
 
@@ -2149,7 +2136,7 @@ static struct imon_context *imon_init_intf0(struct usb_interface *intf)
 	return ictx;
 
 urb_submit_failed:
-	ir_input_unregister(ictx->rdev);
+	rc_unregister_device(ictx->rdev);
 rdev_setup_failed:
 	input_unregister_device(ictx->idev);
 idev_setup_failed:
@@ -2287,7 +2274,7 @@ static int __devinit imon_probe(struct usb_interface *interface,
 	mutex_lock(&driver_lock);
 
 	first_if = usb_ifnum_to_if(usbdev, 0);
-	first_if_ctx = (struct imon_context *)usb_get_intfdata(first_if);
+	first_if_ctx = usb_get_intfdata(first_if);
 
 	if (ifnum == 0) {
 		ictx = imon_init_intf0(interface);
@@ -2376,7 +2363,7 @@ static void __devexit imon_disconnect(struct usb_interface *interface)
 		ictx->dev_present_intf0 = false;
 		usb_kill_urb(ictx->rx_urb_intf0);
 		input_unregister_device(ictx->idev);
-		ir_input_unregister(ictx->rdev);
+		rc_unregister_device(ictx->rdev);
 		if (ictx->display_supported) {
 			if (ictx->display_type == IMON_DISPLAY_TYPE_LCD)
 				usb_deregister_dev(interface, &imon_lcd_class);
diff --git a/drivers/media/IR/ir-jvc-decoder.c b/drivers/media/rc/ir-jvc-decoder.c
index 63dca6e5458..624449afaa6 100644
--- a/drivers/media/IR/ir-jvc-decoder.c
+++ b/drivers/media/rc/ir-jvc-decoder.c
@@ -13,7 +13,7 @@
  */
 
 #include <linux/bitrev.h>
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define JVC_NBITS		16		/* dev(8) + func(8) */
 #define JVC_UNIT		525000		/* ns */
@@ -37,17 +37,16 @@ enum jvc_state {
 
 /**
  * ir_jvc_decode() - Decode one JVC pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @duration:   the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_jvc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_jvc_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct jvc_dec *data = &ir_dev->raw->jvc;
+	struct jvc_dec *data = &dev->raw->jvc;
 
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_JVC))
+	if (!(dev->raw->enabled_protocols & RC_TYPE_JVC))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -140,12 +139,12 @@ again:
 			scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
 				   (bitrev8((data->bits >> 0) & 0xff) << 0);
 			IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
-			ir_keydown(input_dev, scancode, data->toggle);
+			rc_keydown(dev, scancode, data->toggle);
 			data->first = false;
 			data->old_bits = data->bits;
 		} else if (data->bits == data->old_bits) {
 			IR_dprintk(1, "JVC repeat\n");
-			ir_repeat(input_dev);
+			rc_repeat(dev);
 		} else {
 			IR_dprintk(1, "JVC invalid repeat msg\n");
 			break;
@@ -174,7 +173,7 @@ out:
 }
 
 static struct ir_raw_handler jvc_handler = {
-	.protocols	= IR_TYPE_JVC,
+	.protocols	= RC_TYPE_JVC,
 	.decode		= ir_jvc_decode,
 };
 
diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c
index 9fc0db9d344..f011c5d9dea 100644
--- a/drivers/media/IR/ir-lirc-codec.c
+++ b/drivers/media/rc/ir-lirc-codec.c
@@ -16,29 +16,28 @@
 #include <linux/wait.h>
 #include <media/lirc.h>
 #include <media/lirc_dev.h>
-#include <media/ir-core.h>
-#include "ir-core-priv.h"
+#include <media/rc-core.h>
+#include "rc-core-priv.h"
 
 #define LIRCBUF_SIZE 256
 
 /**
  * ir_lirc_decode() - Send raw IR data to lirc_dev to be relayed to the
  *		      lircd userspace daemon for decoding.
- * @input_dev:	the struct input_dev descriptor of the device
+ * @input_dev:	the struct rc_dev descriptor of the device
  * @duration:	the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the lirc interfaces aren't wired up.
  */
-static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_lirc_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct lirc_codec *lirc = &ir_dev->raw->lirc;
+	struct lirc_codec *lirc = &dev->raw->lirc;
 	int sample;
 
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_LIRC))
+	if (!(dev->raw->enabled_protocols & RC_TYPE_LIRC))
 		return 0;
 
-	if (!ir_dev->raw->lirc.drv || !ir_dev->raw->lirc.drv->rbuf)
+	if (!dev->raw->lirc.drv || !dev->raw->lirc.drv->rbuf)
 		return -EINVAL;
 
 	/* Packet start */
@@ -79,7 +78,7 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 							(u64)LIRC_VALUE_MASK);
 
 			gap_sample = LIRC_SPACE(lirc->gap_duration);
-			lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+			lirc_buffer_write(dev->raw->lirc.drv->rbuf,
 						(unsigned char *) &gap_sample);
 			lirc->gap = false;
 		}
@@ -88,9 +87,9 @@ static int ir_lirc_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 					LIRC_SPACE(ev.duration / 1000);
 	}
 
-	lirc_buffer_write(ir_dev->raw->lirc.drv->rbuf,
+	lirc_buffer_write(dev->raw->lirc.drv->rbuf,
 			  (unsigned char *) &sample);
-	wake_up(&ir_dev->raw->lirc.drv->rbuf->wait_poll);
+	wake_up(&dev->raw->lirc.drv->rbuf->wait_poll);
 
 	return 0;
 }
@@ -99,9 +98,10 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
 				   size_t n, loff_t *ppos)
 {
 	struct lirc_codec *lirc;
-	struct ir_input_dev *ir_dev;
+	struct rc_dev *dev;
 	int *txbuf; /* buffer with values to transmit */
-	int ret = 0, count;
+	int ret = 0;
+	size_t count;
 
 	lirc = lirc_get_pdata(file);
 	if (!lirc)
@@ -111,21 +111,21 @@ static ssize_t ir_lirc_transmit_ir(struct file *file, const char *buf,
 		return -EINVAL;
 
 	count = n / sizeof(int);
-	if (count > LIRCBUF_SIZE || count % 2 == 0)
+	if (count > LIRCBUF_SIZE || count % 2 == 0 || n % sizeof(int) != 0)
 		return -EINVAL;
 
 	txbuf = memdup_user(buf, n);
 	if (IS_ERR(txbuf))
 		return PTR_ERR(txbuf);
 
-	ir_dev = lirc->ir_dev;
-	if (!ir_dev) {
+	dev = lirc->dev;
+	if (!dev) {
 		ret = -EFAULT;
 		goto out;
 	}
 
-	if (ir_dev->props && ir_dev->props->tx_ir)
-		ret = ir_dev->props->tx_ir(ir_dev->props->priv, txbuf, (u32)n);
+	if (dev->tx_ir)
+		ret = dev->tx_ir(dev, txbuf, (u32)n);
 
 out:
 	kfree(txbuf);
@@ -136,21 +136,18 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 			unsigned long __user arg)
 {
 	struct lirc_codec *lirc;
-	struct ir_input_dev *ir_dev;
+	struct rc_dev *dev;
 	int ret = 0;
-	void *drv_data;
 	__u32 val = 0, tmp;
 
 	lirc = lirc_get_pdata(filep);
 	if (!lirc)
 		return -EFAULT;
 
-	ir_dev = lirc->ir_dev;
-	if (!ir_dev || !ir_dev->props || !ir_dev->props->priv)
+	dev = lirc->dev;
+	if (!dev)
 		return -EFAULT;
 
-	drv_data = ir_dev->props->priv;
-
 	if (_IOC_DIR(cmd) & _IOC_WRITE) {
 		ret = get_user(val, (__u32 *)arg);
 		if (ret)
@@ -171,84 +168,85 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 
 	/* TX settings */
 	case LIRC_SET_TRANSMITTER_MASK:
-		if (!ir_dev->props->s_tx_mask)
+		if (!dev->s_tx_mask)
 			return -EINVAL;
 
-		return ir_dev->props->s_tx_mask(drv_data, val);
+		return dev->s_tx_mask(dev, val);
 
 	case LIRC_SET_SEND_CARRIER:
-		if (!ir_dev->props->s_tx_carrier)
+		if (!dev->s_tx_carrier)
 			return -EINVAL;
 
-		return ir_dev->props->s_tx_carrier(drv_data, val);
+		return dev->s_tx_carrier(dev, val);
 
 	case LIRC_SET_SEND_DUTY_CYCLE:
-		if (!ir_dev->props->s_tx_duty_cycle)
+		if (!dev->s_tx_duty_cycle)
 			return -ENOSYS;
 
 		if (val <= 0 || val >= 100)
 			return -EINVAL;
 
-		return ir_dev->props->s_tx_duty_cycle(drv_data, val);
+		return dev->s_tx_duty_cycle(dev, val);
 
 	/* RX settings */
 	case LIRC_SET_REC_CARRIER:
-		if (!ir_dev->props->s_rx_carrier_range)
+		if (!dev->s_rx_carrier_range)
 			return -ENOSYS;
 
 		if (val <= 0)
 			return -EINVAL;
 
-		return ir_dev->props->s_rx_carrier_range(drv_data,
-			ir_dev->raw->lirc.carrier_low, val);
+		return dev->s_rx_carrier_range(dev,
+					       dev->raw->lirc.carrier_low,
+					       val);
 
 	case LIRC_SET_REC_CARRIER_RANGE:
 		if (val <= 0)
 			return -EINVAL;
 
-		ir_dev->raw->lirc.carrier_low = val;
+		dev->raw->lirc.carrier_low = val;
 		return 0;
 
 	case LIRC_GET_REC_RESOLUTION:
-		val = ir_dev->props->rx_resolution;
+		val = dev->rx_resolution;
 		break;
 
 	case LIRC_SET_WIDEBAND_RECEIVER:
-		if (!ir_dev->props->s_learning_mode)
+		if (!dev->s_learning_mode)
 			return -ENOSYS;
 
-		return ir_dev->props->s_learning_mode(drv_data, !!val);
+		return dev->s_learning_mode(dev, !!val);
 
 	case LIRC_SET_MEASURE_CARRIER_MODE:
-		if (!ir_dev->props->s_carrier_report)
+		if (!dev->s_carrier_report)
 			return -ENOSYS;
 
-		return ir_dev->props->s_carrier_report(drv_data, !!val);
+		return dev->s_carrier_report(dev, !!val);
 
 	/* Generic timeout support */
 	case LIRC_GET_MIN_TIMEOUT:
-		if (!ir_dev->props->max_timeout)
+		if (!dev->max_timeout)
 			return -ENOSYS;
-		val = ir_dev->props->min_timeout / 1000;
+		val = dev->min_timeout / 1000;
 		break;
 
 	case LIRC_GET_MAX_TIMEOUT:
-		if (!ir_dev->props->max_timeout)
+		if (!dev->max_timeout)
 			return -ENOSYS;
-		val = ir_dev->props->max_timeout / 1000;
+		val = dev->max_timeout / 1000;
 		break;
 
 	case LIRC_SET_REC_TIMEOUT:
-		if (!ir_dev->props->max_timeout)
+		if (!dev->max_timeout)
 			return -ENOSYS;
 
 		tmp = val * 1000;
 
-		if (tmp < ir_dev->props->min_timeout ||
-			tmp > ir_dev->props->max_timeout)
+		if (tmp < dev->min_timeout ||
+		    tmp > dev->max_timeout)
 				return -EINVAL;
 
-		ir_dev->props->timeout = tmp;
+		dev->timeout = tmp;
 		break;
 
 	case LIRC_SET_REC_TIMEOUT_REPORTS:
@@ -289,9 +287,8 @@ static struct file_operations lirc_fops = {
 	.llseek		= no_llseek,
 };
 
-static int ir_lirc_register(struct input_dev *input_dev)
+static int ir_lirc_register(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
 	struct lirc_driver *drv;
 	struct lirc_buffer *rbuf;
 	int rc = -ENOMEM;
@@ -310,44 +307,40 @@ static int ir_lirc_register(struct input_dev *input_dev)
 		goto rbuf_init_failed;
 
 	features = LIRC_CAN_REC_MODE2;
-	if (ir_dev->props->tx_ir) {
-
+	if (dev->tx_ir) {
 		features |= LIRC_CAN_SEND_PULSE;
-		if (ir_dev->props->s_tx_mask)
+		if (dev->s_tx_mask)
 			features |= LIRC_CAN_SET_TRANSMITTER_MASK;
-		if (ir_dev->props->s_tx_carrier)
+		if (dev->s_tx_carrier)
 			features |= LIRC_CAN_SET_SEND_CARRIER;
-
-		if (ir_dev->props->s_tx_duty_cycle)
+		if (dev->s_tx_duty_cycle)
 			features |= LIRC_CAN_SET_SEND_DUTY_CYCLE;
 	}
 
-	if (ir_dev->props->s_rx_carrier_range)
+	if (dev->s_rx_carrier_range)
 		features |= LIRC_CAN_SET_REC_CARRIER |
 			LIRC_CAN_SET_REC_CARRIER_RANGE;
 
-	if (ir_dev->props->s_learning_mode)
+	if (dev->s_learning_mode)
 		features |= LIRC_CAN_USE_WIDEBAND_RECEIVER;
 
-	if (ir_dev->props->s_carrier_report)
+	if (dev->s_carrier_report)
 		features |= LIRC_CAN_MEASURE_CARRIER;
 
-
-	if (ir_dev->props->max_timeout)
+	if (dev->max_timeout)
 		features |= LIRC_CAN_SET_REC_TIMEOUT;
 
-
 	snprintf(drv->name, sizeof(drv->name), "ir-lirc-codec (%s)",
-		 ir_dev->driver_name);
+		 dev->driver_name);
 	drv->minor = -1;
 	drv->features = features;
-	drv->data = &ir_dev->raw->lirc;
+	drv->data = &dev->raw->lirc;
 	drv->rbuf = rbuf;
 	drv->set_use_inc = &ir_lirc_open;
 	drv->set_use_dec = &ir_lirc_close;
 	drv->code_length = sizeof(struct ir_raw_event) * 8;
 	drv->fops = &lirc_fops;
-	drv->dev = &ir_dev->dev;
+	drv->dev = &dev->dev;
 	drv->owner = THIS_MODULE;
 
 	drv->minor = lirc_register_driver(drv);
@@ -356,8 +349,8 @@ static int ir_lirc_register(struct input_dev *input_dev)
 		goto lirc_register_failed;
 	}
 
-	ir_dev->raw->lirc.drv = drv;
-	ir_dev->raw->lirc.ir_dev = ir_dev;
+	dev->raw->lirc.drv = drv;
+	dev->raw->lirc.dev = dev;
 	return 0;
 
 lirc_register_failed:
@@ -369,10 +362,9 @@ rbuf_alloc_failed:
 	return rc;
 }
 
-static int ir_lirc_unregister(struct input_dev *input_dev)
+static int ir_lirc_unregister(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct lirc_codec *lirc = &ir_dev->raw->lirc;
+	struct lirc_codec *lirc = &dev->raw->lirc;
 
 	lirc_unregister_driver(lirc->drv->minor);
 	lirc_buffer_free(lirc->drv->rbuf);
@@ -382,7 +374,7 @@ static int ir_lirc_unregister(struct input_dev *input_dev)
 }
 
 static struct ir_raw_handler lirc_handler = {
-	.protocols	= IR_TYPE_LIRC,
+	.protocols	= RC_TYPE_LIRC,
 	.decode		= ir_lirc_decode,
 	.raw_register	= ir_lirc_register,
 	.raw_unregister	= ir_lirc_unregister,
diff --git a/drivers/media/IR/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index 70993f79c8a..7b58b4a1729 100644
--- a/drivers/media/IR/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -13,7 +13,7 @@
  */
 
 #include <linux/bitrev.h>
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define NEC_NBITS		32
 #define NEC_UNIT		562500  /* ns */
@@ -39,19 +39,18 @@ enum nec_state {
 
 /**
  * ir_nec_decode() - Decode one NEC pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @duration:	the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct nec_dec *data = &ir_dev->raw->nec;
+	struct nec_dec *data = &dev->raw->nec;
 	u32 scancode;
 	u8 address, not_address, command, not_command;
 
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_NEC))
+	if (!(dev->raw->enabled_protocols & RC_TYPE_NEC))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -89,9 +88,13 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 			data->state = STATE_BIT_PULSE;
 			return 0;
 		} else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
-			ir_repeat(input_dev);
-			IR_dprintk(1, "Repeat last key\n");
-			data->state = STATE_TRAILER_PULSE;
+			if (!dev->keypressed) {
+				IR_dprintk(1, "Discarding last key repeat: event after key up\n");
+			} else {
+				rc_repeat(dev);
+				IR_dprintk(1, "Repeat last key\n");
+				data->state = STATE_TRAILER_PULSE;
+			}
 			return 0;
 		}
 
@@ -115,7 +118,7 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 			geq_margin(ev.duration,
 			NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
 				IR_dprintk(1, "Repeat last key\n");
-				ir_repeat(input_dev);
+				rc_repeat(dev);
 				data->state = STATE_INACTIVE;
 				return 0;
 
@@ -179,7 +182,7 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 		if (data->is_nec_x)
 			data->necx_repeat = true;
 
-		ir_keydown(input_dev, scancode, 0);
+		rc_keydown(dev, scancode, 0);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
@@ -191,7 +194,7 @@ static int ir_nec_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 }
 
 static struct ir_raw_handler nec_handler = {
-	.protocols	= IR_TYPE_NEC,
+	.protocols	= RC_TYPE_NEC,
 	.decode		= ir_nec_decode,
 };
 
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/rc/ir-raw.c
index a06a07e4e0b..185baddcbf1 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/rc/ir-raw.c
@@ -1,4 +1,4 @@
-/* ir-raw-event.c - handle IR Pulse/Space event
+/* ir-raw.c - handle IR pulse/space events
  *
  * Copyright (C) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
  *
@@ -16,7 +16,7 @@
 #include <linux/mutex.h>
 #include <linux/sched.h>
 #include <linux/freezer.h>
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 /* Define the max number of pulse/space transitions to buffer */
 #define MAX_IR_EVENT_SIZE      512
@@ -64,7 +64,7 @@ static int ir_raw_event_thread(void *data)
 
 		mutex_lock(&ir_raw_handler_lock);
 		list_for_each_entry(handler, &ir_raw_handler_list, list)
-			handler->decode(raw->input_dev, ev);
+			handler->decode(raw->dev, ev);
 		raw->prev_ev = ev;
 		mutex_unlock(&ir_raw_handler_lock);
 	}
@@ -74,7 +74,7 @@ static int ir_raw_event_thread(void *data)
 
 /**
  * ir_raw_event_store() - pass a pulse/space duration to the raw ir decoders
- * @input_dev:	the struct input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  * @ev:		the struct ir_raw_event descriptor of the pulse/space
  *
  * This routine (which may be called from an interrupt context) stores a
@@ -82,17 +82,15 @@ static int ir_raw_event_thread(void *data)
  * signalled as positive values and spaces as negative values. A zero value
  * will reset the decoding state machines.
  */
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev)
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-
-	if (!ir->raw)
+	if (!dev->raw)
 		return -EINVAL;
 
 	IR_dprintk(2, "sample: (%05dus %s)\n",
-		TO_US(ev->duration), TO_STR(ev->pulse));
+		   TO_US(ev->duration), TO_STR(ev->pulse));
 
-	if (kfifo_in(&ir->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
+	if (kfifo_in(&dev->raw->kfifo, ev, sizeof(*ev)) != sizeof(*ev))
 		return -ENOMEM;
 
 	return 0;
@@ -101,7 +99,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store);
 
 /**
  * ir_raw_event_store_edge() - notify raw ir decoders of the start of a pulse/space
- * @input_dev:	the struct input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  * @type:	the type of the event that has occurred
  *
  * This routine (which may be called from an interrupt context) is used to
@@ -110,50 +108,49 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store);
  * hardware which does not provide durations directly but only interrupts
  * (or similar events) on state change.
  */
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type)
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type)
 {
-	struct ir_input_dev	*ir = input_get_drvdata(input_dev);
 	ktime_t			now;
 	s64			delta; /* ns */
 	struct ir_raw_event	ev;
 	int			rc = 0;
 
-	if (!ir->raw)
+	if (!dev->raw)
 		return -EINVAL;
 
 	now = ktime_get();
-	delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+	delta = ktime_to_ns(ktime_sub(now, dev->raw->last_event));
 
 	/* Check for a long duration since last event or if we're
 	 * being called for the first time, note that delta can't
 	 * possibly be negative.
 	 */
 	ev.duration = 0;
-	if (delta > IR_MAX_DURATION || !ir->raw->last_type)
+	if (delta > IR_MAX_DURATION || !dev->raw->last_type)
 		type |= IR_START_EVENT;
 	else
 		ev.duration = delta;
 
 	if (type & IR_START_EVENT)
-		ir_raw_event_reset(input_dev);
-	else if (ir->raw->last_type & IR_SPACE) {
+		ir_raw_event_reset(dev);
+	else if (dev->raw->last_type & IR_SPACE) {
 		ev.pulse = false;
-		rc = ir_raw_event_store(input_dev, &ev);
-	} else if (ir->raw->last_type & IR_PULSE) {
+		rc = ir_raw_event_store(dev, &ev);
+	} else if (dev->raw->last_type & IR_PULSE) {
 		ev.pulse = true;
-		rc = ir_raw_event_store(input_dev, &ev);
+		rc = ir_raw_event_store(dev, &ev);
 	} else
 		return 0;
 
-	ir->raw->last_event = now;
-	ir->raw->last_type = type;
+	dev->raw->last_event = now;
+	dev->raw->last_type = type;
 	return rc;
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
 
 /**
  * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
- * @input_dev:	the struct input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  * @type:	the type of the event that has occurred
  *
  * This routine (which may be called from an interrupt context) works
@@ -161,84 +158,76 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
  * This routine is intended for devices with limited internal buffer
  * It automerges samples of same type, and handles timeouts
  */
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
-						struct ir_raw_event *ev)
+int ir_raw_event_store_with_filter(struct rc_dev *dev, struct ir_raw_event *ev)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	struct ir_raw_event_ctrl *raw = ir->raw;
-
-	if (!raw || !ir->props)
+	if (!dev->raw)
 		return -EINVAL;
 
 	/* Ignore spaces in idle mode */
-	if (ir->idle && !ev->pulse)
+	if (dev->idle && !ev->pulse)
 		return 0;
-	else if (ir->idle)
-		ir_raw_event_set_idle(input_dev, false);
-
-	if (!raw->this_ev.duration) {
-		raw->this_ev = *ev;
-	} else if (ev->pulse == raw->this_ev.pulse) {
-		raw->this_ev.duration += ev->duration;
-	} else {
-		ir_raw_event_store(input_dev, &raw->this_ev);
-		raw->this_ev = *ev;
+	else if (dev->idle)
+		ir_raw_event_set_idle(dev, false);
+
+	if (!dev->raw->this_ev.duration)
+		dev->raw->this_ev = *ev;
+	else if (ev->pulse == dev->raw->this_ev.pulse)
+		dev->raw->this_ev.duration += ev->duration;
+	else {
+		ir_raw_event_store(dev, &dev->raw->this_ev);
+		dev->raw->this_ev = *ev;
 	}
 
 	/* Enter idle mode if nessesary */
-	if (!ev->pulse && ir->props->timeout &&
-		raw->this_ev.duration >= ir->props->timeout) {
-		ir_raw_event_set_idle(input_dev, true);
-	}
+	if (!ev->pulse && dev->timeout &&
+	    dev->raw->this_ev.duration >= dev->timeout)
+		ir_raw_event_set_idle(dev, true);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
 
 /**
- * ir_raw_event_set_idle() - hint the ir core if device is receiving
- * IR data or not
- * @input_dev: the struct input_dev device descriptor
- * @idle: the hint value
+ * ir_raw_event_set_idle() - provide hint to rc-core when the device is idle or not
+ * @dev:	the struct rc_dev device descriptor
+ * @idle:	whether the device is idle or not
  */
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle)
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
-	struct ir_raw_event_ctrl *raw = ir->raw;
-
-	if (!ir->props || !ir->raw)
+	if (!dev->raw)
 		return;
 
 	IR_dprintk(2, "%s idle mode\n", idle ? "enter" : "leave");
 
 	if (idle) {
-		raw->this_ev.timeout = true;
-		ir_raw_event_store(input_dev, &raw->this_ev);
-		init_ir_raw_event(&raw->this_ev);
+		dev->raw->this_ev.timeout = true;
+		ir_raw_event_store(dev, &dev->raw->this_ev);
+		init_ir_raw_event(&dev->raw->this_ev);
 	}
 
-	if (ir->props->s_idle)
-		ir->props->s_idle(ir->props->priv, idle);
-	ir->idle = idle;
+	if (dev->s_idle)
+		dev->s_idle(dev, idle);
+
+	dev->idle = idle;
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
 
 /**
  * ir_raw_event_handle() - schedules the decoding of stored ir data
- * @input_dev:	the struct input_dev device descriptor
+ * @dev:	the struct rc_dev device descriptor
  *
- * This routine will signal the workqueue to start decoding stored ir data.
+ * This routine will tell rc-core to start decoding stored ir data.
  */
-void ir_raw_event_handle(struct input_dev *input_dev)
+void ir_raw_event_handle(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
 	unsigned long flags;
 
-	if (!ir->raw)
+	if (!dev->raw)
 		return;
 
-	spin_lock_irqsave(&ir->raw->lock, flags);
-	wake_up_process(ir->raw->thread);
-	spin_unlock_irqrestore(&ir->raw->lock, flags);
+	spin_lock_irqsave(&dev->raw->lock, flags);
+	wake_up_process(dev->raw->thread);
+	spin_unlock_irqrestore(&dev->raw->lock, flags);
 }
 EXPORT_SYMBOL_GPL(ir_raw_event_handle);
 
@@ -256,69 +245,69 @@ ir_raw_get_allowed_protocols()
 /*
  * Used to (un)register raw event clients
  */
-int ir_raw_event_register(struct input_dev *input_dev)
+int ir_raw_event_register(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
 	int rc;
 	struct ir_raw_handler *handler;
 
-	ir->raw = kzalloc(sizeof(*ir->raw), GFP_KERNEL);
-	if (!ir->raw)
-		return -ENOMEM;
+	if (!dev)
+		return -EINVAL;
 
-	ir->raw->input_dev = input_dev;
+	dev->raw = kzalloc(sizeof(*dev->raw), GFP_KERNEL);
+	if (!dev->raw)
+		return -ENOMEM;
 
-	ir->raw->enabled_protocols = ~0;
-	rc = kfifo_alloc(&ir->raw->kfifo, sizeof(s64) * MAX_IR_EVENT_SIZE,
+	dev->raw->dev = dev;
+	dev->raw->enabled_protocols = ~0;
+	rc = kfifo_alloc(&dev->raw->kfifo,
+			 sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
 			 GFP_KERNEL);
-	if (rc < 0) {
-		kfree(ir->raw);
-		ir->raw = NULL;
-		return rc;
-	}
+	if (rc < 0)
+		goto out;
 
-	spin_lock_init(&ir->raw->lock);
-	ir->raw->thread = kthread_run(ir_raw_event_thread, ir->raw,
-			"rc%u",  (unsigned int)ir->devno);
+	spin_lock_init(&dev->raw->lock);
+	dev->raw->thread = kthread_run(ir_raw_event_thread, dev->raw,
+				       "rc%ld", dev->devno);
 
-	if (IS_ERR(ir->raw->thread)) {
-		int ret = PTR_ERR(ir->raw->thread);
-
-		kfree(ir->raw);
-		ir->raw = NULL;
-		return ret;
+	if (IS_ERR(dev->raw->thread)) {
+		rc = PTR_ERR(dev->raw->thread);
+		goto out;
 	}
 
 	mutex_lock(&ir_raw_handler_lock);
-	list_add_tail(&ir->raw->list, &ir_raw_client_list);
+	list_add_tail(&dev->raw->list, &ir_raw_client_list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_register)
-			handler->raw_register(ir->raw->input_dev);
+			handler->raw_register(dev);
 	mutex_unlock(&ir_raw_handler_lock);
 
 	return 0;
+
+out:
+	kfree(dev->raw);
+	dev->raw = NULL;
+	return rc;
 }
 
-void ir_raw_event_unregister(struct input_dev *input_dev)
+void ir_raw_event_unregister(struct rc_dev *dev)
 {
-	struct ir_input_dev *ir = input_get_drvdata(input_dev);
 	struct ir_raw_handler *handler;
 
-	if (!ir->raw)
+	if (!dev || !dev->raw)
 		return;
 
-	kthread_stop(ir->raw->thread);
+	kthread_stop(dev->raw->thread);
 
 	mutex_lock(&ir_raw_handler_lock);
-	list_del(&ir->raw->list);
+	list_del(&dev->raw->list);
 	list_for_each_entry(handler, &ir_raw_handler_list, list)
 		if (handler->raw_unregister)
-			handler->raw_unregister(ir->raw->input_dev);
+			handler->raw_unregister(dev);
 	mutex_unlock(&ir_raw_handler_lock);
 
-	kfifo_free(&ir->raw->kfifo);
-	kfree(ir->raw);
-	ir->raw = NULL;
+	kfifo_free(&dev->raw->kfifo);
+	kfree(dev->raw);
+	dev->raw = NULL;
 }
 
 /*
@@ -333,7 +322,7 @@ int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler)
 	list_add_tail(&ir_raw_handler->list, &ir_raw_handler_list);
 	if (ir_raw_handler->raw_register)
 		list_for_each_entry(raw, &ir_raw_client_list, list)
-			ir_raw_handler->raw_register(raw->input_dev);
+			ir_raw_handler->raw_register(raw->dev);
 	available_protocols |= ir_raw_handler->protocols;
 	mutex_unlock(&ir_raw_handler_lock);
 
@@ -349,7 +338,7 @@ void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler)
 	list_del(&ir_raw_handler->list);
 	if (ir_raw_handler->raw_unregister)
 		list_for_each_entry(raw, &ir_raw_client_list, list)
-			ir_raw_handler->raw_unregister(raw->input_dev);
+			ir_raw_handler->raw_unregister(raw->dev);
 	available_protocols &= ~ir_raw_handler->protocols;
 	mutex_unlock(&ir_raw_handler_lock);
 }
@@ -368,7 +357,7 @@ static void init_decoders(struct work_struct *work)
 	load_lirc_codec();
 
 	/* If needed, we may later add some init code. In this case,
-	   it is needed to change the CONFIG_MODULE test at ir-core.h
+	   it is needed to change the CONFIG_MODULE test at rc-core.h
 	 */
 }
 #endif
diff --git a/drivers/media/IR/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
index 572ed4ca8c6..ebdba553991 100644
--- a/drivers/media/IR/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -20,7 +20,7 @@
  * the first two bits are start bits, and a third one is a filing bit
  */
 
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define RC5_NBITS		14
 #define RC5X_NBITS		20
@@ -40,19 +40,18 @@ enum rc5_state {
 
 /**
  * ir_rc5_decode() - Decode one RC-5 pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @ev:		the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_rc5_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct rc5_dec *data = &ir_dev->raw->rc5;
+	struct rc5_dec *data = &dev->raw->rc5;
 	u8 toggle;
 	u32 scancode;
 
-        if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5))
+        if (!(dev->raw->enabled_protocols & RC_TYPE_RC5))
                 return 0;
 
 	if (!is_timing_event(ev)) {
@@ -96,7 +95,7 @@ again:
 		return 0;
 
 	case STATE_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+		if (!is_transition(&ev, &dev->raw->prev_ev))
 			break;
 
 		if (data->count == data->wanted_bits)
@@ -151,7 +150,7 @@ again:
 				   scancode, toggle);
 		}
 
-		ir_keydown(input_dev, scancode, toggle);
+		rc_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
@@ -164,7 +163,7 @@ out:
 }
 
 static struct ir_raw_handler rc5_handler = {
-	.protocols	= IR_TYPE_RC5,
+	.protocols	= RC_TYPE_RC5,
 	.decode		= ir_rc5_decode,
 };
 
diff --git a/drivers/media/IR/ir-rc5-sz-decoder.c b/drivers/media/rc/ir-rc5-sz-decoder.c
index 7c413501a3f..90aa8868629 100644
--- a/drivers/media/IR/ir-rc5-sz-decoder.c
+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
@@ -20,7 +20,7 @@
  * the first two bits are start bits, and a third one is a filing bit
  */
 
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define RC5_SZ_NBITS		15
 #define RC5_UNIT		888888 /* ns */
@@ -36,19 +36,18 @@ enum rc5_sz_state {
 
 /**
  * ir_rc5_sz_decode() - Decode one RC-5 Streamzap pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @ev:		the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_rc5_sz_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_rc5_sz_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct rc5_sz_dec *data = &ir_dev->raw->rc5_sz;
+	struct rc5_sz_dec *data = &dev->raw->rc5_sz;
 	u8 toggle, command, system;
 	u32 scancode;
 
-        if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC5_SZ))
+        if (!(dev->raw->enabled_protocols & RC_TYPE_RC5_SZ))
                 return 0;
 
 	if (!is_timing_event(ev)) {
@@ -91,7 +90,7 @@ again:
 		return 0;
 
 	case STATE_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+		if (!is_transition(&ev, &dev->raw->prev_ev))
 			break;
 
 		if (data->count == data->wanted_bits)
@@ -115,7 +114,7 @@ again:
 		IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
 			   scancode, toggle);
 
-		ir_keydown(input_dev, scancode, toggle);
+		rc_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
@@ -128,7 +127,7 @@ out:
 }
 
 static struct ir_raw_handler rc5_sz_handler = {
-	.protocols	= IR_TYPE_RC5_SZ,
+	.protocols	= RC_TYPE_RC5_SZ,
 	.decode		= ir_rc5_sz_decode,
 };
 
diff --git a/drivers/media/IR/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
index d25da91f44f..755dafa3871 100644
--- a/drivers/media/IR/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -12,7 +12,7 @@
  * GNU General Public License for more details.
  */
 
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 /*
  * This decoder currently supports:
@@ -70,19 +70,18 @@ static enum rc6_mode rc6_mode(struct rc6_dec *data)
 
 /**
  * ir_rc6_decode() - Decode one RC6 pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @ev:		the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_rc6_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct rc6_dec *data = &ir_dev->raw->rc6;
+	struct rc6_dec *data = &dev->raw->rc6;
 	u32 scancode;
 	u8 toggle;
 
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC6))
+	if (!(dev->raw->enabled_protocols & RC_TYPE_RC6))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -139,7 +138,7 @@ again:
 		return 0;
 
 	case STATE_HEADER_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+		if (!is_transition(&ev, &dev->raw->prev_ev))
 			break;
 
 		if (data->count == RC6_HEADER_NBITS)
@@ -159,7 +158,7 @@ again:
 		return 0;
 
 	case STATE_TOGGLE_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev) ||
+		if (!is_transition(&ev, &dev->raw->prev_ev) ||
 		    !geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
 			break;
 
@@ -204,7 +203,7 @@ again:
 		return 0;
 
 	case STATE_BODY_BIT_END:
-		if (!is_transition(&ev, &ir_dev->raw->prev_ev))
+		if (!is_transition(&ev, &dev->raw->prev_ev))
 			break;
 
 		if (data->count == data->wanted_bits)
@@ -243,7 +242,7 @@ again:
 			goto out;
 		}
 
-		ir_keydown(input_dev, scancode, toggle);
+		rc_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
@@ -256,7 +255,7 @@ out:
 }
 
 static struct ir_raw_handler rc6_handler = {
-	.protocols	= IR_TYPE_RC6,
+	.protocols	= RC_TYPE_RC6,
 	.decode		= ir_rc6_decode,
 };
 
diff --git a/drivers/media/IR/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c
index 2d15730822b..a92de80c48d 100644
--- a/drivers/media/IR/ir-sony-decoder.c
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -13,7 +13,7 @@
  */
 
 #include <linux/bitrev.h>
-#include "ir-core-priv.h"
+#include "rc-core-priv.h"
 
 #define SONY_UNIT		600000 /* ns */
 #define SONY_HEADER_PULSE	(4 * SONY_UNIT)
@@ -33,19 +33,18 @@ enum sony_state {
 
 /**
  * ir_sony_decode() - Decode one Sony pulse or space
- * @input_dev:	the struct input_dev descriptor of the device
+ * @dev:	the struct rc_dev descriptor of the device
  * @ev:         the struct ir_raw_event descriptor of the pulse/space
  *
  * This function returns -EINVAL if the pulse violates the state machine
  */
-static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
+static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
 {
-	struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
-	struct sony_dec *data = &ir_dev->raw->sony;
+	struct sony_dec *data = &dev->raw->sony;
 	u32 scancode;
 	u8 device, subdevice, function;
 
-	if (!(ir_dev->raw->enabled_protocols & IR_TYPE_SONY))
+	if (!(dev->raw->enabled_protocols & RC_TYPE_SONY))
 		return 0;
 
 	if (!is_timing_event(ev)) {
@@ -144,7 +143,7 @@ static int ir_sony_decode(struct input_dev *input_dev, struct ir_raw_event ev)
 
 		scancode = device << 16 | subdevice << 8 | function;
 		IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
-		ir_keydown(input_dev, scancode, 0);
+		rc_keydown(dev, scancode, 0);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
@@ -157,7 +156,7 @@ out:
 }
 
 static struct ir_raw_handler sony_handler = {
-	.protocols	= IR_TYPE_SONY,
+	.protocols	= RC_TYPE_SONY,
 	.decode		= ir_sony_decode,
 };
 
diff --git a/drivers/media/IR/keymaps/Kconfig b/drivers/media/rc/keymaps/Kconfig
index 14b22f58f82..8e615fd5585 100644
--- a/drivers/media/IR/keymaps/Kconfig
+++ b/drivers/media/rc/keymaps/Kconfig
@@ -1,6 +1,6 @@
 config RC_MAP
 	tristate "Compile Remote Controller keymap modules"
-	depends on IR_CORE
+	depends on RC_CORE
 	default y
 
 	---help---
diff --git a/drivers/media/IR/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile
index 3194d391bbd..0659e9f5014 100644
--- a/drivers/media/IR/keymaps/Makefile
+++ b/drivers/media/rc/keymaps/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-pinnacle-pctv-hd.o \
 			rc-pixelview.o \
 			rc-pixelview-mk12.o \
+			rc-pixelview-002t.o \
 			rc-pixelview-new.o \
 			rc-powercolor-real-angel.o \
 			rc-proteus-2309.o \
@@ -80,6 +81,7 @@ obj-$(CONFIG_RC_MAP) += rc-adstech-dvb-t-pci.o \
 			rc-trekstor.o \
 			rc-tt-1500.o \
 			rc-twinhan1027.o \
+			rc-videomate-m1f.o \
 			rc-videomate-s350.o \
 			rc-videomate-tv-pvr.o \
 			rc-winfast.o \
diff --git a/drivers/media/IR/keymaps/rc-adstech-dvb-t-pci.c b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
index b17283176ec..136d3952ded 100644
--- a/drivers/media/IR/keymaps/rc-adstech-dvb-t-pci.c
+++ b/drivers/media/rc/keymaps/rc-adstech-dvb-t-pci.c
@@ -14,7 +14,7 @@
 
 /* ADS Tech Instant TV DVB-T PCI Remote */
 
-static struct ir_scancode adstech_dvb_t_pci[] = {
+static struct rc_map_table adstech_dvb_t_pci[] = {
 	/* Keys 0 to 9 */
 	{ 0x4d, KEY_0 },
 	{ 0x57, KEY_1 },
@@ -63,23 +63,23 @@ static struct ir_scancode adstech_dvb_t_pci[] = {
 	{ 0x1c, KEY_VOLUMEDOWN },
 };
 
-static struct rc_keymap adstech_dvb_t_pci_map = {
+static struct rc_map_list adstech_dvb_t_pci_map = {
 	.map = {
 		.scan    = adstech_dvb_t_pci,
 		.size    = ARRAY_SIZE(adstech_dvb_t_pci),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_ADSTECH_DVB_T_PCI,
 	}
 };
 
 static int __init init_rc_map_adstech_dvb_t_pci(void)
 {
-	return ir_register_map(&adstech_dvb_t_pci_map);
+	return rc_map_register(&adstech_dvb_t_pci_map);
 }
 
 static void __exit exit_rc_map_adstech_dvb_t_pci(void)
 {
-	ir_unregister_map(&adstech_dvb_t_pci_map);
+	rc_map_unregister(&adstech_dvb_t_pci_map);
 }
 
 module_init(init_rc_map_adstech_dvb_t_pci)
diff --git a/drivers/media/IR/keymaps/rc-alink-dtu-m.c b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
index ddfee7f8093..fe652e928dc 100644
--- a/drivers/media/IR/keymaps/rc-alink-dtu-m.c
+++ b/drivers/media/rc/keymaps/rc-alink-dtu-m.c
@@ -21,7 +21,7 @@
 #include <media/rc-map.h>
 
 /* A-Link DTU(m) slim remote, 6 rows, 3 columns. */
-static struct ir_scancode alink_dtu_m[] = {
+static struct rc_map_table alink_dtu_m[] = {
 	{ 0x0800, KEY_VOLUMEUP },
 	{ 0x0801, KEY_1 },
 	{ 0x0802, KEY_3 },
@@ -42,23 +42,23 @@ static struct ir_scancode alink_dtu_m[] = {
 	{ 0x081d, KEY_CHANNELDOWN },
 };
 
-static struct rc_keymap alink_dtu_m_map = {
+static struct rc_map_list alink_dtu_m_map = {
 	.map = {
 		.scan    = alink_dtu_m,
 		.size    = ARRAY_SIZE(alink_dtu_m),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_ALINK_DTU_M,
 	}
 };
 
 static int __init init_rc_map_alink_dtu_m(void)
 {
-	return ir_register_map(&alink_dtu_m_map);
+	return rc_map_register(&alink_dtu_m_map);
 }
 
 static void __exit exit_rc_map_alink_dtu_m(void)
 {
-	ir_unregister_map(&alink_dtu_m_map);
+	rc_map_unregister(&alink_dtu_m_map);
 }
 
 module_init(init_rc_map_alink_dtu_m)
diff --git a/drivers/media/IR/keymaps/rc-anysee.c b/drivers/media/rc/keymaps/rc-anysee.c
index 30d70498cfe..884f1b51a8e 100644
--- a/drivers/media/IR/keymaps/rc-anysee.c
+++ b/drivers/media/rc/keymaps/rc-anysee.c
@@ -20,7 +20,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode anysee[] = {
+static struct rc_map_table anysee[] = {
 	{ 0x0800, KEY_0 },
 	{ 0x0801, KEY_1 },
 	{ 0x0802, KEY_2 },
@@ -67,23 +67,23 @@ static struct ir_scancode anysee[] = {
 	{ 0x0851, KEY_PAUSE },
 };
 
-static struct rc_keymap anysee_map = {
+static struct rc_map_list anysee_map = {
 	.map = {
 		.scan    = anysee,
 		.size    = ARRAY_SIZE(anysee),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_ANYSEE,
 	}
 };
 
 static int __init init_rc_map_anysee(void)
 {
-	return ir_register_map(&anysee_map);
+	return rc_map_register(&anysee_map);
 }
 
 static void __exit exit_rc_map_anysee(void)
 {
-	ir_unregister_map(&anysee_map);
+	rc_map_unregister(&anysee_map);
 }
 
 module_init(init_rc_map_anysee)
diff --git a/drivers/media/IR/keymaps/rc-apac-viewcomp.c b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
index 0ef2b562baf..7af188209ff 100644
--- a/drivers/media/IR/keymaps/rc-apac-viewcomp.c
+++ b/drivers/media/rc/keymaps/rc-apac-viewcomp.c
@@ -14,7 +14,7 @@
 
 /* Attila Kondoros <attila.kondoros@chello.hu> */
 
-static struct ir_scancode apac_viewcomp[] = {
+static struct rc_map_table apac_viewcomp[] = {
 
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
@@ -54,23 +54,23 @@ static struct ir_scancode apac_viewcomp[] = {
 	{ 0x18, KEY_KPMINUS },		/* fine tune <<<< */
 };
 
-static struct rc_keymap apac_viewcomp_map = {
+static struct rc_map_list apac_viewcomp_map = {
 	.map = {
 		.scan    = apac_viewcomp,
 		.size    = ARRAY_SIZE(apac_viewcomp),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_APAC_VIEWCOMP,
 	}
 };
 
 static int __init init_rc_map_apac_viewcomp(void)
 {
-	return ir_register_map(&apac_viewcomp_map);
+	return rc_map_register(&apac_viewcomp_map);
 }
 
 static void __exit exit_rc_map_apac_viewcomp(void)
 {
-	ir_unregister_map(&apac_viewcomp_map);
+	rc_map_unregister(&apac_viewcomp_map);
 }
 
 module_init(init_rc_map_apac_viewcomp)
diff --git a/drivers/media/IR/keymaps/rc-asus-pc39.c b/drivers/media/rc/keymaps/rc-asus-pc39.c
index 2996e0a3b8d..b2481154491 100644
--- a/drivers/media/IR/keymaps/rc-asus-pc39.c
+++ b/drivers/media/rc/keymaps/rc-asus-pc39.c
@@ -18,7 +18,7 @@
  * which has a label saying is "Model PC-39"
  */
 
-static struct ir_scancode asus_pc39[] = {
+static struct rc_map_table asus_pc39[] = {
 	/* Keys 0 to 9 */
 	{ 0x082a, KEY_0 },
 	{ 0x0816, KEY_1 },
@@ -65,23 +65,23 @@ static struct ir_scancode asus_pc39[] = {
 	{ 0x083e, KEY_DVD },		/* dvd */
 };
 
-static struct rc_keymap asus_pc39_map = {
+static struct rc_map_list asus_pc39_map = {
 	.map = {
 		.scan    = asus_pc39,
 		.size    = ARRAY_SIZE(asus_pc39),
-		.ir_type = IR_TYPE_RC5,
+		.rc_type = RC_TYPE_RC5,
 		.name    = RC_MAP_ASUS_PC39,
 	}
 };
 
 static int __init init_rc_map_asus_pc39(void)
 {
-	return ir_register_map(&asus_pc39_map);
+	return rc_map_register(&asus_pc39_map);
 }
 
 static void __exit exit_rc_map_asus_pc39(void)
 {
-	ir_unregister_map(&asus_pc39_map);
+	rc_map_unregister(&asus_pc39_map);
 }
 
 module_init(init_rc_map_asus_pc39)
diff --git a/drivers/media/IR/keymaps/rc-ati-tv-wonder-hd-600.c b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
index 8edfd293d01..f766b24b015 100644
--- a/drivers/media/IR/keymaps/rc-ati-tv-wonder-hd-600.c
+++ b/drivers/media/rc/keymaps/rc-ati-tv-wonder-hd-600.c
@@ -16,7 +16,7 @@
    Devin Heitmueller <devin.heitmueller@gmail.com>
  */
 
-static struct ir_scancode ati_tv_wonder_hd_600[] = {
+static struct rc_map_table ati_tv_wonder_hd_600[] = {
 	{ 0x00, KEY_RECORD},		/* Row 1 */
 	{ 0x01, KEY_PLAYPAUSE},
 	{ 0x02, KEY_STOP},
@@ -43,23 +43,23 @@ static struct ir_scancode ati_tv_wonder_hd_600[] = {
 	{ 0x17, KEY_VOLUMEDOWN},
 };
 
-static struct rc_keymap ati_tv_wonder_hd_600_map = {
+static struct rc_map_list ati_tv_wonder_hd_600_map = {
 	.map = {
 		.scan    = ati_tv_wonder_hd_600,
 		.size    = ARRAY_SIZE(ati_tv_wonder_hd_600),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_ATI_TV_WONDER_HD_600,
 	}
 };
 
 static int __init init_rc_map_ati_tv_wonder_hd_600(void)
 {
-	return ir_register_map(&ati_tv_wonder_hd_600_map);
+	return rc_map_register(&ati_tv_wonder_hd_600_map);
 }
 
 static void __exit exit_rc_map_ati_tv_wonder_hd_600(void)
 {
-	ir_unregister_map(&ati_tv_wonder_hd_600_map);
+	rc_map_unregister(&ati_tv_wonder_hd_600_map);
 }
 
 module_init(init_rc_map_ati_tv_wonder_hd_600)
diff --git a/drivers/media/IR/keymaps/rc-avermedia-a16d.c b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
index 12f043587f2..ec9beeebd41 100644
--- a/drivers/media/IR/keymaps/rc-avermedia-a16d.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-a16d.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode avermedia_a16d[] = {
+static struct rc_map_table avermedia_a16d[] = {
 	{ 0x20, KEY_LIST},
 	{ 0x00, KEY_POWER},
 	{ 0x28, KEY_1},
@@ -49,23 +49,23 @@ static struct ir_scancode avermedia_a16d[] = {
 	{ 0x2a, KEY_MENU},
 };
 
-static struct rc_keymap avermedia_a16d_map = {
+static struct rc_map_list avermedia_a16d_map = {
 	.map = {
 		.scan    = avermedia_a16d,
 		.size    = ARRAY_SIZE(avermedia_a16d),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_AVERMEDIA_A16D,
 	}
 };
 
 static int __init init_rc_map_avermedia_a16d(void)
 {
-	return ir_register_map(&avermedia_a16d_map);
+	return rc_map_register(&avermedia_a16d_map);
 }
 
 static void __exit exit_rc_map_avermedia_a16d(void)
 {
-	ir_unregister_map(&avermedia_a16d_map);
+	rc_map_unregister(&avermedia_a16d_map);
 }
 
 module_init(init_rc_map_avermedia_a16d)
diff --git a/drivers/media/IR/keymaps/rc-avermedia-cardbus.c b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
index 2a945b02e8c..bdf97b74cf9 100644
--- a/drivers/media/IR/keymaps/rc-avermedia-cardbus.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-cardbus.c
@@ -14,7 +14,7 @@
 
 /* Oldrich Jedlicka <oldium.pro@seznam.cz> */
 
-static struct ir_scancode avermedia_cardbus[] = {
+static struct rc_map_table avermedia_cardbus[] = {
 	{ 0x00, KEY_POWER },
 	{ 0x01, KEY_TUNER },		/* TV/FM */
 	{ 0x03, KEY_TEXT },		/* Teletext */
@@ -71,23 +71,23 @@ static struct ir_scancode avermedia_cardbus[] = {
 	{ 0x43, KEY_CHANNELUP },	/* Channel up */
 };
 
-static struct rc_keymap avermedia_cardbus_map = {
+static struct rc_map_list avermedia_cardbus_map = {
 	.map = {
 		.scan    = avermedia_cardbus,
 		.size    = ARRAY_SIZE(avermedia_cardbus),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_AVERMEDIA_CARDBUS,
 	}
 };
 
 static int __init init_rc_map_avermedia_cardbus(void)
 {
-	return ir_register_map(&avermedia_cardbus_map);
+	return rc_map_register(&avermedia_cardbus_map);
 }
 
 static void __exit exit_rc_map_avermedia_cardbus(void)
 {
-	ir_unregister_map(&avermedia_cardbus_map);
+	rc_map_unregister(&avermedia_cardbus_map);
 }
 
 module_init(init_rc_map_avermedia_cardbus)
diff --git a/drivers/media/IR/keymaps/rc-avermedia-dvbt.c b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
index 39dde622287..3ddb41bc075 100644
--- a/drivers/media/IR/keymaps/rc-avermedia-dvbt.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-dvbt.c
@@ -14,7 +14,7 @@
 
 /* Matt Jesson <dvb@jesson.eclipse.co.uk */
 
-static struct ir_scancode avermedia_dvbt[] = {
+static struct rc_map_table avermedia_dvbt[] = {
 	{ 0x28, KEY_0 },		/* '0' / 'enter' */
 	{ 0x22, KEY_1 },		/* '1' */
 	{ 0x12, KEY_2 },		/* '2' / 'up arrow' */
@@ -52,23 +52,23 @@ static struct ir_scancode avermedia_dvbt[] = {
 	{ 0x3e, KEY_VOLUMEUP },		/* 'volume +' */
 };
 
-static struct rc_keymap avermedia_dvbt_map = {
+static struct rc_map_list avermedia_dvbt_map = {
 	.map = {
 		.scan    = avermedia_dvbt,
 		.size    = ARRAY_SIZE(avermedia_dvbt),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_AVERMEDIA_DVBT,
 	}
 };
 
 static int __init init_rc_map_avermedia_dvbt(void)
 {
-	return ir_register_map(&avermedia_dvbt_map);
+	return rc_map_register(&avermedia_dvbt_map);
 }
 
 static void __exit exit_rc_map_avermedia_dvbt(void)
 {
-	ir_unregister_map(&avermedia_dvbt_map);
+	rc_map_unregister(&avermedia_dvbt_map);
 }
 
 module_init(init_rc_map_avermedia_dvbt)
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m135a.c b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
index e4471fb2ad1..357fea58a46 100644
--- a/drivers/media/IR/keymaps/rc-avermedia-m135a.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m135a.c
@@ -22,7 +22,7 @@
  * codes added by Herton Ronaldo Krzesinski <herton@mandriva.com.br>
  */
 
-static struct ir_scancode avermedia_m135a[] = {
+static struct rc_map_table avermedia_m135a[] = {
 	/* RM-JX */
 	{ 0x0200, KEY_POWER2 },
 	{ 0x022e, KEY_DOT },		/* '.' */
@@ -121,23 +121,23 @@ static struct ir_scancode avermedia_m135a[] = {
 	{ 0x041e, KEY_NEXT },
 };
 
-static struct rc_keymap avermedia_m135a_map = {
+static struct rc_map_list avermedia_m135a_map = {
 	.map = {
 		.scan    = avermedia_m135a,
 		.size    = ARRAY_SIZE(avermedia_m135a),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_AVERMEDIA_M135A,
 	}
 };
 
 static int __init init_rc_map_avermedia_m135a(void)
 {
-	return ir_register_map(&avermedia_m135a_map);
+	return rc_map_register(&avermedia_m135a_map);
 }
 
 static void __exit exit_rc_map_avermedia_m135a(void)
 {
-	ir_unregister_map(&avermedia_m135a_map);
+	rc_map_unregister(&avermedia_m135a_map);
 }
 
 module_init(init_rc_map_avermedia_m135a)
diff --git a/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
index cf8d45717cb..e694e6eac37 100644
--- a/drivers/media/IR/keymaps/rc-avermedia-m733a-rm-k6.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-m733a-rm-k6.c
@@ -16,7 +16,7 @@
  * Herton Ronaldo Krzesinski <herton@mandriva.com.br>
  */
 
-static struct ir_scancode avermedia_m733a_rm_k6[] = {
+static struct rc_map_table avermedia_m733a_rm_k6[] = {
 	{ 0x0401, KEY_POWER2 },
 	{ 0x0406, KEY_MUTE },
 	{ 0x0408, KEY_MODE },     /* TV/FM */
@@ -69,23 +69,23 @@ static struct ir_scancode avermedia_m733a_rm_k6[] = {
 	{ 0x041e, KEY_NEXT },
 };
 
-static struct rc_keymap avermedia_m733a_rm_k6_map = {
+static struct rc_map_list avermedia_m733a_rm_k6_map = {
 	.map = {
 		.scan    = avermedia_m733a_rm_k6,
 		.size    = ARRAY_SIZE(avermedia_m733a_rm_k6),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_AVERMEDIA_M733A_RM_K6,
 	}
 };
 
 static int __init init_rc_map_avermedia_m733a_rm_k6(void)
 {
-	return ir_register_map(&avermedia_m733a_rm_k6_map);
+	return rc_map_register(&avermedia_m733a_rm_k6_map);
 }
 
 static void __exit exit_rc_map_avermedia_m733a_rm_k6(void)
 {
-	ir_unregister_map(&avermedia_m733a_rm_k6_map);
+	rc_map_unregister(&avermedia_m733a_rm_k6_map);
 }
 
 module_init(init_rc_map_avermedia_m733a_rm_k6)
diff --git a/drivers/media/IR/keymaps/rc-avermedia-rm-ks.c b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
index 9ee60906c86..f4ca1fff455 100644
--- a/drivers/media/IR/keymaps/rc-avermedia-rm-ks.c
+++ b/drivers/media/rc/keymaps/rc-avermedia-rm-ks.c
@@ -23,7 +23,7 @@
 /* Initial keytable is from Jose Alberto Reguero <jareguero@telefonica.net>
    and Felipe Morales Moreno <felipe.morales.moreno@gmail.com> */
 /* FIXME: mappings are not 100% correct? */
-static struct ir_scancode avermedia_rm_ks[] = {
+static struct rc_map_table avermedia_rm_ks[] = {
 	{ 0x0501, KEY_POWER2 },
 	{ 0x0502, KEY_CHANNELUP },
 	{ 0x0503, KEY_CHANNELDOWN },
@@ -53,23 +53,23 @@ static struct ir_scancode avermedia_rm_ks[] = {
 	{ 0x0556, KEY_ZOOM },
 };
 
-static struct rc_keymap avermedia_rm_ks_map = {
+static struct rc_map_list avermedia_rm_ks_map = {
 	.map = {
 		.scan    = avermedia_rm_ks,
 		.size    = ARRAY_SIZE(avermedia_rm_ks),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_AVERMEDIA_RM_KS,
 	}
 };
 
 static int __init init_rc_map_avermedia_rm_ks(void)
 {
-	return ir_register_map(&avermedia_rm_ks_map);
+	return rc_map_register(&avermedia_rm_ks_map);
 }
 
 static void __exit exit_rc_map_avermedia_rm_ks(void)
 {
-	ir_unregister_map(&avermedia_rm_ks_map);
+	rc_map_unregister(&avermedia_rm_ks_map);
 }
 
 module_init(init_rc_map_avermedia_rm_ks)
diff --git a/drivers/media/IR/keymaps/rc-avermedia.c b/drivers/media/rc/keymaps/rc-avermedia.c
index 21effd5bfb0..edfa71506d3 100644
--- a/drivers/media/IR/keymaps/rc-avermedia.c
+++ b/drivers/media/rc/keymaps/rc-avermedia.c
@@ -14,7 +14,7 @@
 
 /* Alex Hermann <gaaf@gmx.net> */
 
-static struct ir_scancode avermedia[] = {
+static struct rc_map_table avermedia[] = {
 	{ 0x28, KEY_1 },
 	{ 0x18, KEY_2 },
 	{ 0x38, KEY_3 },
@@ -60,23 +60,23 @@ static struct ir_scancode avermedia[] = {
 	{ 0x31, KEY_CHANNELUP }		/* CHANNEL/PAGE+ */
 };
 
-static struct rc_keymap avermedia_map = {
+static struct rc_map_list avermedia_map = {
 	.map = {
 		.scan    = avermedia,
 		.size    = ARRAY_SIZE(avermedia),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_AVERMEDIA,
 	}
 };
 
 static int __init init_rc_map_avermedia(void)
 {
-	return ir_register_map(&avermedia_map);
+	return rc_map_register(&avermedia_map);
 }
 
 static void __exit exit_rc_map_avermedia(void)
 {
-	ir_unregister_map(&avermedia_map);
+	rc_map_unregister(&avermedia_map);
 }
 
 module_init(init_rc_map_avermedia)
diff --git a/drivers/media/IR/keymaps/rc-avertv-303.c b/drivers/media/rc/keymaps/rc-avertv-303.c
index 971c59d6f9d..32e94988dc9 100644
--- a/drivers/media/IR/keymaps/rc-avertv-303.c
+++ b/drivers/media/rc/keymaps/rc-avertv-303.c
@@ -14,7 +14,7 @@
 
 /* AVERTV STUDIO 303 Remote */
 
-static struct ir_scancode avertv_303[] = {
+static struct rc_map_table avertv_303[] = {
 	{ 0x2a, KEY_1 },
 	{ 0x32, KEY_2 },
 	{ 0x3a, KEY_3 },
@@ -59,23 +59,23 @@ static struct ir_scancode avertv_303[] = {
 	{ 0x1b, KEY_UP },
 };
 
-static struct rc_keymap avertv_303_map = {
+static struct rc_map_list avertv_303_map = {
 	.map = {
 		.scan    = avertv_303,
 		.size    = ARRAY_SIZE(avertv_303),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_AVERTV_303,
 	}
 };
 
 static int __init init_rc_map_avertv_303(void)
 {
-	return ir_register_map(&avertv_303_map);
+	return rc_map_register(&avertv_303_map);
 }
 
 static void __exit exit_rc_map_avertv_303(void)
 {
-	ir_unregister_map(&avertv_303_map);
+	rc_map_unregister(&avertv_303_map);
 }
 
 module_init(init_rc_map_avertv_303)
diff --git a/drivers/media/IR/keymaps/rc-azurewave-ad-tu700.c b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
index e0876147d47..c3f6d62ac89 100644
--- a/drivers/media/IR/keymaps/rc-azurewave-ad-tu700.c
+++ b/drivers/media/rc/keymaps/rc-azurewave-ad-tu700.c
@@ -20,7 +20,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode azurewave_ad_tu700[] = {
+static struct rc_map_table azurewave_ad_tu700[] = {
 	{ 0x0000, KEY_TAB },             /* Tab */
 	{ 0x0001, KEY_2 },
 	{ 0x0002, KEY_CHANNELDOWN },
@@ -76,23 +76,23 @@ static struct ir_scancode azurewave_ad_tu700[] = {
 	{ 0x005f, KEY_BLUE },
 };
 
-static struct rc_keymap azurewave_ad_tu700_map = {
+static struct rc_map_list azurewave_ad_tu700_map = {
 	.map = {
 		.scan    = azurewave_ad_tu700,
 		.size    = ARRAY_SIZE(azurewave_ad_tu700),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_AZUREWAVE_AD_TU700,
 	}
 };
 
 static int __init init_rc_map_azurewave_ad_tu700(void)
 {
-	return ir_register_map(&azurewave_ad_tu700_map);
+	return rc_map_register(&azurewave_ad_tu700_map);
 }
 
 static void __exit exit_rc_map_azurewave_ad_tu700(void)
 {
-	ir_unregister_map(&azurewave_ad_tu700_map);
+	rc_map_unregister(&azurewave_ad_tu700_map);
 }
 
 module_init(init_rc_map_azurewave_ad_tu700)
diff --git a/drivers/media/IR/keymaps/rc-behold-columbus.c b/drivers/media/rc/keymaps/rc-behold-columbus.c
index 9f56c98fef5..4b787fa94f0 100644
--- a/drivers/media/IR/keymaps/rc-behold-columbus.c
+++ b/drivers/media/rc/keymaps/rc-behold-columbus.c
@@ -21,7 +21,7 @@
  * helps to descide which keycodes to assign to the buttons.
  */
 
-static struct ir_scancode behold_columbus[] = {
+static struct rc_map_table behold_columbus[] = {
 
 	/*  0x13   0x11   0x1C   0x12  *
 	 *  Mute  Source  TV/FM  Power *
@@ -82,23 +82,23 @@ static struct ir_scancode behold_columbus[] = {
 
 };
 
-static struct rc_keymap behold_columbus_map = {
+static struct rc_map_list behold_columbus_map = {
 	.map = {
 		.scan    = behold_columbus,
 		.size    = ARRAY_SIZE(behold_columbus),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_BEHOLD_COLUMBUS,
 	}
 };
 
 static int __init init_rc_map_behold_columbus(void)
 {
-	return ir_register_map(&behold_columbus_map);
+	return rc_map_register(&behold_columbus_map);
 }
 
 static void __exit exit_rc_map_behold_columbus(void)
 {
-	ir_unregister_map(&behold_columbus_map);
+	rc_map_unregister(&behold_columbus_map);
 }
 
 module_init(init_rc_map_behold_columbus)
diff --git a/drivers/media/IR/keymaps/rc-behold.c b/drivers/media/rc/keymaps/rc-behold.c
index abc140b2098..0ee1f149364 100644
--- a/drivers/media/IR/keymaps/rc-behold.c
+++ b/drivers/media/rc/keymaps/rc-behold.c
@@ -24,13 +24,13 @@
  * helps to descide which keycodes to assign to the buttons.
  */
 
-static struct ir_scancode behold[] = {
+static struct rc_map_table behold[] = {
 
 	/*  0x1c            0x12  *
 	 *  TV/FM          POWER  *
 	 *                        */
-	{ 0x1c, KEY_TUNER },	/* XXX KEY_TV / KEY_RADIO */
-	{ 0x12, KEY_POWER },
+	{ 0x6b861c, KEY_TUNER },	/* XXX KEY_TV / KEY_RADIO */
+	{ 0x6b8612, KEY_POWER },
 
 	/*  0x01    0x02    0x03  *
 	 *   1       2       3    *
@@ -41,28 +41,28 @@ static struct ir_scancode behold[] = {
 	 *  0x07    0x08    0x09  *
 	 *   7       8       9    *
 	 *                        */
-	{ 0x01, KEY_1 },
-	{ 0x02, KEY_2 },
-	{ 0x03, KEY_3 },
-	{ 0x04, KEY_4 },
-	{ 0x05, KEY_5 },
-	{ 0x06, KEY_6 },
-	{ 0x07, KEY_7 },
-	{ 0x08, KEY_8 },
-	{ 0x09, KEY_9 },
+	{ 0x6b8601, KEY_1 },
+	{ 0x6b8602, KEY_2 },
+	{ 0x6b8603, KEY_3 },
+	{ 0x6b8604, KEY_4 },
+	{ 0x6b8605, KEY_5 },
+	{ 0x6b8606, KEY_6 },
+	{ 0x6b8607, KEY_7 },
+	{ 0x6b8608, KEY_8 },
+	{ 0x6b8609, KEY_9 },
 
 	/*  0x0a    0x00    0x17  *
 	 * RECALL    0      MODE  *
 	 *                        */
-	{ 0x0a, KEY_AGAIN },
-	{ 0x00, KEY_0 },
-	{ 0x17, KEY_MODE },
+	{ 0x6b860a, KEY_AGAIN },
+	{ 0x6b8600, KEY_0 },
+	{ 0x6b8617, KEY_MODE },
 
 	/*  0x14          0x10    *
 	 * ASPECT      FULLSCREEN *
 	 *                        */
-	{ 0x14, KEY_SCREEN },
-	{ 0x10, KEY_ZOOM },
+	{ 0x6b8614, KEY_SCREEN },
+	{ 0x6b8610, KEY_ZOOM },
 
 	/*          0x0b          *
 	 *           Up           *
@@ -73,17 +73,17 @@ static struct ir_scancode behold[] = {
 	 *         0x015          *
 	 *         Down           *
 	 *                        */
-	{ 0x0b, KEY_CHANNELUP },
-	{ 0x18, KEY_VOLUMEDOWN },
-	{ 0x16, KEY_OK },		/* XXX KEY_ENTER */
-	{ 0x0c, KEY_VOLUMEUP },
-	{ 0x15, KEY_CHANNELDOWN },
+	{ 0x6b860b, KEY_CHANNELUP },
+	{ 0x6b8618, KEY_VOLUMEDOWN },
+	{ 0x6b8616, KEY_OK },		/* XXX KEY_ENTER */
+	{ 0x6b860c, KEY_VOLUMEUP },
+	{ 0x6b8615, KEY_CHANNELDOWN },
 
 	/*  0x11            0x0d  *
 	 *  MUTE            INFO  *
 	 *                        */
-	{ 0x11, KEY_MUTE },
-	{ 0x0d, KEY_INFO },
+	{ 0x6b8611, KEY_MUTE },
+	{ 0x6b860d, KEY_INFO },
 
 	/*  0x0f    0x1b    0x1a  *
 	 * RECORD PLAY/PAUSE STOP *
@@ -92,46 +92,46 @@ static struct ir_scancode behold[] = {
 	 *TELETEXT  AUDIO  SOURCE *
 	 *           RED   YELLOW *
 	 *                        */
-	{ 0x0f, KEY_RECORD },
-	{ 0x1b, KEY_PLAYPAUSE },
-	{ 0x1a, KEY_STOP },
-	{ 0x0e, KEY_TEXT },
-	{ 0x1f, KEY_RED },	/*XXX KEY_AUDIO	*/
-	{ 0x1e, KEY_YELLOW },	/*XXX KEY_SOURCE	*/
+	{ 0x6b860f, KEY_RECORD },
+	{ 0x6b861b, KEY_PLAYPAUSE },
+	{ 0x6b861a, KEY_STOP },
+	{ 0x6b860e, KEY_TEXT },
+	{ 0x6b861f, KEY_RED },	/*XXX KEY_AUDIO	*/
+	{ 0x6b861e, KEY_YELLOW },	/*XXX KEY_SOURCE	*/
 
 	/*  0x1d   0x13     0x19  *
 	 * SLEEP  PREVIEW   DVB   *
 	 *         GREEN    BLUE  *
 	 *                        */
-	{ 0x1d, KEY_SLEEP },
-	{ 0x13, KEY_GREEN },
-	{ 0x19, KEY_BLUE },	/* XXX KEY_SAT	*/
+	{ 0x6b861d, KEY_SLEEP },
+	{ 0x6b8613, KEY_GREEN },
+	{ 0x6b8619, KEY_BLUE },	/* XXX KEY_SAT	*/
 
 	/*  0x58           0x5c   *
 	 * FREEZE        SNAPSHOT *
 	 *                        */
-	{ 0x58, KEY_SLOW },
-	{ 0x5c, KEY_CAMERA },
+	{ 0x6b8658, KEY_SLOW },
+	{ 0x6b865c, KEY_CAMERA },
 
 };
 
-static struct rc_keymap behold_map = {
+static struct rc_map_list behold_map = {
 	.map = {
 		.scan    = behold,
 		.size    = ARRAY_SIZE(behold),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_BEHOLD,
 	}
 };
 
 static int __init init_rc_map_behold(void)
 {
-	return ir_register_map(&behold_map);
+	return rc_map_register(&behold_map);
 }
 
 static void __exit exit_rc_map_behold(void)
 {
-	ir_unregister_map(&behold_map);
+	rc_map_unregister(&behold_map);
 }
 
 module_init(init_rc_map_behold)
diff --git a/drivers/media/IR/keymaps/rc-budget-ci-old.c b/drivers/media/rc/keymaps/rc-budget-ci-old.c
index 64c2ac91333..97fc3862f60 100644
--- a/drivers/media/IR/keymaps/rc-budget-ci-old.c
+++ b/drivers/media/rc/keymaps/rc-budget-ci-old.c
@@ -18,7 +18,7 @@
  * This is a "middle of the road" approach, differences are noted
  */
 
-static struct ir_scancode budget_ci_old[] = {
+static struct rc_map_table budget_ci_old[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
@@ -66,23 +66,23 @@ static struct ir_scancode budget_ci_old[] = {
 	{ 0x3e, KEY_TUNER },
 };
 
-static struct rc_keymap budget_ci_old_map = {
+static struct rc_map_list budget_ci_old_map = {
 	.map = {
 		.scan    = budget_ci_old,
 		.size    = ARRAY_SIZE(budget_ci_old),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_BUDGET_CI_OLD,
 	}
 };
 
 static int __init init_rc_map_budget_ci_old(void)
 {
-	return ir_register_map(&budget_ci_old_map);
+	return rc_map_register(&budget_ci_old_map);
 }
 
 static void __exit exit_rc_map_budget_ci_old(void)
 {
-	ir_unregister_map(&budget_ci_old_map);
+	rc_map_unregister(&budget_ci_old_map);
 }
 
 module_init(init_rc_map_budget_ci_old)
diff --git a/drivers/media/IR/keymaps/rc-cinergy-1400.c b/drivers/media/rc/keymaps/rc-cinergy-1400.c
index 074f2c2c2c6..284534b67e7 100644
--- a/drivers/media/IR/keymaps/rc-cinergy-1400.c
+++ b/drivers/media/rc/keymaps/rc-cinergy-1400.c
@@ -14,7 +14,7 @@
 
 /* Cinergy 1400 DVB-T */
 
-static struct ir_scancode cinergy_1400[] = {
+static struct rc_map_table cinergy_1400[] = {
 	{ 0x01, KEY_POWER },
 	{ 0x02, KEY_1 },
 	{ 0x03, KEY_2 },
@@ -58,23 +58,23 @@ static struct ir_scancode cinergy_1400[] = {
 	{ 0x5c, KEY_NEXT },
 };
 
-static struct rc_keymap cinergy_1400_map = {
+static struct rc_map_list cinergy_1400_map = {
 	.map = {
 		.scan    = cinergy_1400,
 		.size    = ARRAY_SIZE(cinergy_1400),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_CINERGY_1400,
 	}
 };
 
 static int __init init_rc_map_cinergy_1400(void)
 {
-	return ir_register_map(&cinergy_1400_map);
+	return rc_map_register(&cinergy_1400_map);
 }
 
 static void __exit exit_rc_map_cinergy_1400(void)
 {
-	ir_unregister_map(&cinergy_1400_map);
+	rc_map_unregister(&cinergy_1400_map);
 }
 
 module_init(init_rc_map_cinergy_1400)
diff --git a/drivers/media/IR/keymaps/rc-cinergy.c b/drivers/media/rc/keymaps/rc-cinergy.c
index cf84c3dba74..99520ff65b6 100644
--- a/drivers/media/IR/keymaps/rc-cinergy.c
+++ b/drivers/media/rc/keymaps/rc-cinergy.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode cinergy[] = {
+static struct rc_map_table cinergy[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
@@ -52,23 +52,23 @@ static struct ir_scancode cinergy[] = {
 	{ 0x23, KEY_STOP },
 };
 
-static struct rc_keymap cinergy_map = {
+static struct rc_map_list cinergy_map = {
 	.map = {
 		.scan    = cinergy,
 		.size    = ARRAY_SIZE(cinergy),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_CINERGY,
 	}
 };
 
 static int __init init_rc_map_cinergy(void)
 {
-	return ir_register_map(&cinergy_map);
+	return rc_map_register(&cinergy_map);
 }
 
 static void __exit exit_rc_map_cinergy(void)
 {
-	ir_unregister_map(&cinergy_map);
+	rc_map_unregister(&cinergy_map);
 }
 
 module_init(init_rc_map_cinergy)
diff --git a/drivers/media/IR/keymaps/rc-dib0700-nec.c b/drivers/media/rc/keymaps/rc-dib0700-nec.c
index ae1832038fb..c59851b203d 100644
--- a/drivers/media/IR/keymaps/rc-dib0700-nec.c
+++ b/drivers/media/rc/keymaps/rc-dib0700-nec.c
@@ -17,7 +17,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode dib0700_nec_table[] = {
+static struct rc_map_table dib0700_nec_table[] = {
 	/* Key codes for the Pixelview SBTVD remote */
 	{ 0x8613, KEY_MUTE },
 	{ 0x8612, KEY_POWER },
@@ -98,23 +98,23 @@ static struct ir_scancode dib0700_nec_table[] = {
 	{ 0x4542, KEY_SELECT }, /* Select video input, 'Select' for Teletext */
 };
 
-static struct rc_keymap dib0700_nec_map = {
+static struct rc_map_list dib0700_nec_map = {
 	.map = {
 		.scan    = dib0700_nec_table,
 		.size    = ARRAY_SIZE(dib0700_nec_table),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_DIB0700_NEC_TABLE,
 	}
 };
 
 static int __init init_rc_map(void)
 {
-	return ir_register_map(&dib0700_nec_map);
+	return rc_map_register(&dib0700_nec_map);
 }
 
 static void __exit exit_rc_map(void)
 {
-	ir_unregister_map(&dib0700_nec_map);
+	rc_map_unregister(&dib0700_nec_map);
 }
 
 module_init(init_rc_map)
diff --git a/drivers/media/IR/keymaps/rc-dib0700-rc5.c b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
index 4a4797cfd77..4af12e45dfb 100644
--- a/drivers/media/IR/keymaps/rc-dib0700-rc5.c
+++ b/drivers/media/rc/keymaps/rc-dib0700-rc5.c
@@ -17,7 +17,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode dib0700_rc5_table[] = {
+static struct rc_map_table dib0700_rc5_table[] = {
 	/* Key codes for the tiny Pinnacle remote*/
 	{ 0x0700, KEY_MUTE },
 	{ 0x0701, KEY_MENU }, /* Pinnacle logo */
@@ -209,23 +209,23 @@ static struct ir_scancode dib0700_rc5_table[] = {
 	{ 0x1d3d, KEY_POWER },
 };
 
-static struct rc_keymap dib0700_rc5_map = {
+static struct rc_map_list dib0700_rc5_map = {
 	.map = {
 		.scan    = dib0700_rc5_table,
 		.size    = ARRAY_SIZE(dib0700_rc5_table),
-		.ir_type = IR_TYPE_RC5,
+		.rc_type = RC_TYPE_RC5,
 		.name    = RC_MAP_DIB0700_RC5_TABLE,
 	}
 };
 
 static int __init init_rc_map(void)
 {
-	return ir_register_map(&dib0700_rc5_map);
+	return rc_map_register(&dib0700_rc5_map);
 }
 
 static void __exit exit_rc_map(void)
 {
-	ir_unregister_map(&dib0700_rc5_map);
+	rc_map_unregister(&dib0700_rc5_map);
 }
 
 module_init(init_rc_map)
diff --git a/drivers/media/IR/keymaps/rc-digitalnow-tinytwin.c b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
index 63e469e2dd2..f68b450f559 100644
--- a/drivers/media/IR/keymaps/rc-digitalnow-tinytwin.c
+++ b/drivers/media/rc/keymaps/rc-digitalnow-tinytwin.c
@@ -20,7 +20,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode digitalnow_tinytwin[] = {
+static struct rc_map_table digitalnow_tinytwin[] = {
 	{ 0x0000, KEY_MUTE },            /* [symbol speaker] */
 	{ 0x0001, KEY_VOLUMEUP },
 	{ 0x0002, KEY_POWER2 },          /* TV [power button] */
@@ -72,23 +72,23 @@ static struct ir_scancode digitalnow_tinytwin[] = {
 	{ 0x005a, KEY_PREVIOUS },        /* REPLAY */
 };
 
-static struct rc_keymap digitalnow_tinytwin_map = {
+static struct rc_map_list digitalnow_tinytwin_map = {
 	.map = {
 		.scan    = digitalnow_tinytwin,
 		.size    = ARRAY_SIZE(digitalnow_tinytwin),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_DIGITALNOW_TINYTWIN,
 	}
 };
 
 static int __init init_rc_map_digitalnow_tinytwin(void)
 {
-	return ir_register_map(&digitalnow_tinytwin_map);
+	return rc_map_register(&digitalnow_tinytwin_map);
 }
 
 static void __exit exit_rc_map_digitalnow_tinytwin(void)
 {
-	ir_unregister_map(&digitalnow_tinytwin_map);
+	rc_map_unregister(&digitalnow_tinytwin_map);
 }
 
 module_init(init_rc_map_digitalnow_tinytwin)
diff --git a/drivers/media/IR/keymaps/rc-digittrade.c b/drivers/media/rc/keymaps/rc-digittrade.c
index 5dece78e19c..21d49871f2a 100644
--- a/drivers/media/IR/keymaps/rc-digittrade.c
+++ b/drivers/media/rc/keymaps/rc-digittrade.c
@@ -25,7 +25,7 @@
    Initial keytable was from Alain Kalker <miki@dds.nl> */
 
 /* Digittrade DVB-T USB Stick */
-static struct ir_scancode digittrade[] = {
+static struct rc_map_table digittrade[] = {
 	{ 0x0000, KEY_9 },
 	{ 0x0001, KEY_EPG },             /* EPG */
 	{ 0x0002, KEY_VOLUMEDOWN },      /* Vol Dn */
@@ -56,23 +56,23 @@ static struct ir_scancode digittrade[] = {
 	{ 0x0054, KEY_0 },
 };
 
-static struct rc_keymap digittrade_map = {
+static struct rc_map_list digittrade_map = {
 	.map = {
 		.scan    = digittrade,
 		.size    = ARRAY_SIZE(digittrade),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_DIGITTRADE,
 	}
 };
 
 static int __init init_rc_map_digittrade(void)
 {
-	return ir_register_map(&digittrade_map);
+	return rc_map_register(&digittrade_map);
 }
 
 static void __exit exit_rc_map_digittrade(void)
 {
-	ir_unregister_map(&digittrade_map);
+	rc_map_unregister(&digittrade_map);
 }
 
 module_init(init_rc_map_digittrade)
diff --git a/drivers/media/IR/keymaps/rc-dm1105-nec.c b/drivers/media/rc/keymaps/rc-dm1105-nec.c
index 90684d0efea..d024fbf88bc 100644
--- a/drivers/media/IR/keymaps/rc-dm1105-nec.c
+++ b/drivers/media/rc/keymaps/rc-dm1105-nec.c
@@ -16,7 +16,7 @@
    Igor M. Liplianin <liplianin@me.by>
  */
 
-static struct ir_scancode dm1105_nec[] = {
+static struct rc_map_table dm1105_nec[] = {
 	{ 0x0a, KEY_POWER2},		/* power */
 	{ 0x0c, KEY_MUTE},		/* mute */
 	{ 0x11, KEY_1},
@@ -50,23 +50,23 @@ static struct ir_scancode dm1105_nec[] = {
 	{ 0x1b, KEY_B},			/* recall */
 };
 
-static struct rc_keymap dm1105_nec_map = {
+static struct rc_map_list dm1105_nec_map = {
 	.map = {
 		.scan    = dm1105_nec,
 		.size    = ARRAY_SIZE(dm1105_nec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_DM1105_NEC,
 	}
 };
 
 static int __init init_rc_map_dm1105_nec(void)
 {
-	return ir_register_map(&dm1105_nec_map);
+	return rc_map_register(&dm1105_nec_map);
 }
 
 static void __exit exit_rc_map_dm1105_nec(void)
 {
-	ir_unregister_map(&dm1105_nec_map);
+	rc_map_unregister(&dm1105_nec_map);
 }
 
 module_init(init_rc_map_dm1105_nec)
diff --git a/drivers/media/IR/keymaps/rc-dntv-live-dvb-t.c b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
index 8a4027af964..43912bd02a9 100644
--- a/drivers/media/IR/keymaps/rc-dntv-live-dvb-t.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvb-t.c
@@ -14,7 +14,7 @@
 
 /* DigitalNow DNTV Live DVB-T Remote */
 
-static struct ir_scancode dntv_live_dvb_t[] = {
+static struct rc_map_table dntv_live_dvb_t[] = {
 	{ 0x00, KEY_ESC },		/* 'go up a level?' */
 	/* Keys 0 to 9 */
 	{ 0x0a, KEY_0 },
@@ -52,23 +52,23 @@ static struct ir_scancode dntv_live_dvb_t[] = {
 	{ 0x1f, KEY_VOLUMEDOWN },
 };
 
-static struct rc_keymap dntv_live_dvb_t_map = {
+static struct rc_map_list dntv_live_dvb_t_map = {
 	.map = {
 		.scan    = dntv_live_dvb_t,
 		.size    = ARRAY_SIZE(dntv_live_dvb_t),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_DNTV_LIVE_DVB_T,
 	}
 };
 
 static int __init init_rc_map_dntv_live_dvb_t(void)
 {
-	return ir_register_map(&dntv_live_dvb_t_map);
+	return rc_map_register(&dntv_live_dvb_t_map);
 }
 
 static void __exit exit_rc_map_dntv_live_dvb_t(void)
 {
-	ir_unregister_map(&dntv_live_dvb_t_map);
+	rc_map_unregister(&dntv_live_dvb_t_map);
 }
 
 module_init(init_rc_map_dntv_live_dvb_t)
diff --git a/drivers/media/IR/keymaps/rc-dntv-live-dvbt-pro.c b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
index 6f4d60764d5..015e99de06d 100644
--- a/drivers/media/IR/keymaps/rc-dntv-live-dvbt-pro.c
+++ b/drivers/media/rc/keymaps/rc-dntv-live-dvbt-pro.c
@@ -14,7 +14,7 @@
 
 /* DigitalNow DNTV Live! DVB-T Pro Remote */
 
-static struct ir_scancode dntv_live_dvbt_pro[] = {
+static struct rc_map_table dntv_live_dvbt_pro[] = {
 	{ 0x16, KEY_POWER },
 	{ 0x5b, KEY_HOME },
 
@@ -71,23 +71,23 @@ static struct ir_scancode dntv_live_dvbt_pro[] = {
 	{ 0x5d, KEY_BLUE },
 };
 
-static struct rc_keymap dntv_live_dvbt_pro_map = {
+static struct rc_map_list dntv_live_dvbt_pro_map = {
 	.map = {
 		.scan    = dntv_live_dvbt_pro,
 		.size    = ARRAY_SIZE(dntv_live_dvbt_pro),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_DNTV_LIVE_DVBT_PRO,
 	}
 };
 
 static int __init init_rc_map_dntv_live_dvbt_pro(void)
 {
-	return ir_register_map(&dntv_live_dvbt_pro_map);
+	return rc_map_register(&dntv_live_dvbt_pro_map);
 }
 
 static void __exit exit_rc_map_dntv_live_dvbt_pro(void)
 {
-	ir_unregister_map(&dntv_live_dvbt_pro_map);
+	rc_map_unregister(&dntv_live_dvbt_pro_map);
 }
 
 module_init(init_rc_map_dntv_live_dvbt_pro)
diff --git a/drivers/media/IR/keymaps/rc-em-terratec.c b/drivers/media/rc/keymaps/rc-em-terratec.c
index 3130c9c29e6..269d4299da3 100644
--- a/drivers/media/IR/keymaps/rc-em-terratec.c
+++ b/drivers/media/rc/keymaps/rc-em-terratec.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode em_terratec[] = {
+static struct rc_map_table em_terratec[] = {
 	{ 0x01, KEY_CHANNEL },
 	{ 0x02, KEY_SELECT },
 	{ 0x03, KEY_MUTE },
@@ -43,23 +43,23 @@ static struct ir_scancode em_terratec[] = {
 	{ 0x40, KEY_ZOOM },
 };
 
-static struct rc_keymap em_terratec_map = {
+static struct rc_map_list em_terratec_map = {
 	.map = {
 		.scan    = em_terratec,
 		.size    = ARRAY_SIZE(em_terratec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_EM_TERRATEC,
 	}
 };
 
 static int __init init_rc_map_em_terratec(void)
 {
-	return ir_register_map(&em_terratec_map);
+	return rc_map_register(&em_terratec_map);
 }
 
 static void __exit exit_rc_map_em_terratec(void)
 {
-	ir_unregister_map(&em_terratec_map);
+	rc_map_unregister(&em_terratec_map);
 }
 
 module_init(init_rc_map_em_terratec)
diff --git a/drivers/media/IR/keymaps/rc-encore-enltv-fm53.c b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
index 4b816967877..e388698a069 100644
--- a/drivers/media/IR/keymaps/rc-encore-enltv-fm53.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv-fm53.c
@@ -16,7 +16,7 @@
    Mauro Carvalho Chehab <mchehab@infradead.org>
  */
 
-static struct ir_scancode encore_enltv_fm53[] = {
+static struct rc_map_table encore_enltv_fm53[] = {
 	{ 0x10, KEY_POWER2},
 	{ 0x06, KEY_MUTE},
 
@@ -55,23 +55,23 @@ static struct ir_scancode encore_enltv_fm53[] = {
 	{ 0x47, KEY_SLEEP},		/* shutdown */
 };
 
-static struct rc_keymap encore_enltv_fm53_map = {
+static struct rc_map_list encore_enltv_fm53_map = {
 	.map = {
 		.scan    = encore_enltv_fm53,
 		.size    = ARRAY_SIZE(encore_enltv_fm53),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_ENCORE_ENLTV_FM53,
 	}
 };
 
 static int __init init_rc_map_encore_enltv_fm53(void)
 {
-	return ir_register_map(&encore_enltv_fm53_map);
+	return rc_map_register(&encore_enltv_fm53_map);
 }
 
 static void __exit exit_rc_map_encore_enltv_fm53(void)
 {
-	ir_unregister_map(&encore_enltv_fm53_map);
+	rc_map_unregister(&encore_enltv_fm53_map);
 }
 
 module_init(init_rc_map_encore_enltv_fm53)
diff --git a/drivers/media/IR/keymaps/rc-encore-enltv.c b/drivers/media/rc/keymaps/rc-encore-enltv.c
index 9fabffd28cc..afa4e92284e 100644
--- a/drivers/media/IR/keymaps/rc-encore-enltv.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv.c
@@ -15,7 +15,7 @@
 /* Encore ENLTV-FM  - black plastic, white front cover with white glowing buttons
     Juan Pablo Sormani <sorman@gmail.com> */
 
-static struct ir_scancode encore_enltv[] = {
+static struct rc_map_table encore_enltv[] = {
 
 	/* Power button does nothing, neither in Windows app,
 	 although it sends data (used for BIOS wakeup?) */
@@ -86,23 +86,23 @@ static struct ir_scancode encore_enltv[] = {
 	{ 0x57, KEY_BLUE },		/* AP4 */
 };
 
-static struct rc_keymap encore_enltv_map = {
+static struct rc_map_list encore_enltv_map = {
 	.map = {
 		.scan    = encore_enltv,
 		.size    = ARRAY_SIZE(encore_enltv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_ENCORE_ENLTV,
 	}
 };
 
 static int __init init_rc_map_encore_enltv(void)
 {
-	return ir_register_map(&encore_enltv_map);
+	return rc_map_register(&encore_enltv_map);
 }
 
 static void __exit exit_rc_map_encore_enltv(void)
 {
-	ir_unregister_map(&encore_enltv_map);
+	rc_map_unregister(&encore_enltv_map);
 }
 
 module_init(init_rc_map_encore_enltv)
diff --git a/drivers/media/IR/keymaps/rc-encore-enltv2.c b/drivers/media/rc/keymaps/rc-encore-enltv2.c
index efefd516661..7d5b00ed4ff 100644
--- a/drivers/media/IR/keymaps/rc-encore-enltv2.c
+++ b/drivers/media/rc/keymaps/rc-encore-enltv2.c
@@ -15,7 +15,7 @@
 /* Encore ENLTV2-FM  - silver plastic - "Wand Media" written at the botton
     Mauro Carvalho Chehab <mchehab@infradead.org> */
 
-static struct ir_scancode encore_enltv2[] = {
+static struct rc_map_table encore_enltv2[] = {
 	{ 0x4c, KEY_POWER2 },
 	{ 0x4a, KEY_TUNER },
 	{ 0x40, KEY_1 },
@@ -64,23 +64,23 @@ static struct ir_scancode encore_enltv2[] = {
 	{ 0x79, KEY_STOP },
 };
 
-static struct rc_keymap encore_enltv2_map = {
+static struct rc_map_list encore_enltv2_map = {
 	.map = {
 		.scan    = encore_enltv2,
 		.size    = ARRAY_SIZE(encore_enltv2),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_ENCORE_ENLTV2,
 	}
 };
 
 static int __init init_rc_map_encore_enltv2(void)
 {
-	return ir_register_map(&encore_enltv2_map);
+	return rc_map_register(&encore_enltv2_map);
 }
 
 static void __exit exit_rc_map_encore_enltv2(void)
 {
-	ir_unregister_map(&encore_enltv2_map);
+	rc_map_unregister(&encore_enltv2_map);
 }
 
 module_init(init_rc_map_encore_enltv2)
diff --git a/drivers/media/IR/keymaps/rc-evga-indtube.c b/drivers/media/rc/keymaps/rc-evga-indtube.c
index 3f3fb13813b..a2bf24f6dfb 100644
--- a/drivers/media/IR/keymaps/rc-evga-indtube.c
+++ b/drivers/media/rc/keymaps/rc-evga-indtube.c
@@ -16,7 +16,7 @@
    Devin Heitmueller <devin.heitmueller@gmail.com>
  */
 
-static struct ir_scancode evga_indtube[] = {
+static struct rc_map_table evga_indtube[] = {
 	{ 0x12, KEY_POWER},
 	{ 0x02, KEY_MODE},	/* TV */
 	{ 0x14, KEY_MUTE},
@@ -35,23 +35,23 @@ static struct ir_scancode evga_indtube[] = {
 	{ 0x13, KEY_CAMERA},
 };
 
-static struct rc_keymap evga_indtube_map = {
+static struct rc_map_list evga_indtube_map = {
 	.map = {
 		.scan    = evga_indtube,
 		.size    = ARRAY_SIZE(evga_indtube),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_EVGA_INDTUBE,
 	}
 };
 
 static int __init init_rc_map_evga_indtube(void)
 {
-	return ir_register_map(&evga_indtube_map);
+	return rc_map_register(&evga_indtube_map);
 }
 
 static void __exit exit_rc_map_evga_indtube(void)
 {
-	ir_unregister_map(&evga_indtube_map);
+	rc_map_unregister(&evga_indtube_map);
 }
 
 module_init(init_rc_map_evga_indtube)
diff --git a/drivers/media/IR/keymaps/rc-eztv.c b/drivers/media/rc/keymaps/rc-eztv.c
index 660907a78db..1e8e5b2d6e3 100644
--- a/drivers/media/IR/keymaps/rc-eztv.c
+++ b/drivers/media/rc/keymaps/rc-eztv.c
@@ -15,7 +15,7 @@
 /* Alfons Geser <a.geser@cox.net>
  * updates from Job D. R. Borges <jobdrb@ig.com.br> */
 
-static struct ir_scancode eztv[] = {
+static struct rc_map_table eztv[] = {
 	{ 0x12, KEY_POWER },
 	{ 0x01, KEY_TV },	/* DVR */
 	{ 0x15, KEY_DVD },	/* DVD */
@@ -70,23 +70,23 @@ static struct ir_scancode eztv[] = {
 	{ 0x21, KEY_DOT },	/* . (decimal dot) */
 };
 
-static struct rc_keymap eztv_map = {
+static struct rc_map_list eztv_map = {
 	.map = {
 		.scan    = eztv,
 		.size    = ARRAY_SIZE(eztv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_EZTV,
 	}
 };
 
 static int __init init_rc_map_eztv(void)
 {
-	return ir_register_map(&eztv_map);
+	return rc_map_register(&eztv_map);
 }
 
 static void __exit exit_rc_map_eztv(void)
 {
-	ir_unregister_map(&eztv_map);
+	rc_map_unregister(&eztv_map);
 }
 
 module_init(init_rc_map_eztv)
diff --git a/drivers/media/IR/keymaps/rc-flydvb.c b/drivers/media/rc/keymaps/rc-flydvb.c
index a173c81035f..aea2f4acf7d 100644
--- a/drivers/media/IR/keymaps/rc-flydvb.c
+++ b/drivers/media/rc/keymaps/rc-flydvb.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode flydvb[] = {
+static struct rc_map_table flydvb[] = {
 	{ 0x01, KEY_ZOOM },		/* Full Screen */
 	{ 0x00, KEY_POWER },		/* Power */
 
@@ -51,23 +51,23 @@ static struct ir_scancode flydvb[] = {
 	{ 0x0e, KEY_NEXT },		/* End >>| */
 };
 
-static struct rc_keymap flydvb_map = {
+static struct rc_map_list flydvb_map = {
 	.map = {
 		.scan    = flydvb,
 		.size    = ARRAY_SIZE(flydvb),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_FLYDVB,
 	}
 };
 
 static int __init init_rc_map_flydvb(void)
 {
-	return ir_register_map(&flydvb_map);
+	return rc_map_register(&flydvb_map);
 }
 
 static void __exit exit_rc_map_flydvb(void)
 {
-	ir_unregister_map(&flydvb_map);
+	rc_map_unregister(&flydvb_map);
 }
 
 module_init(init_rc_map_flydvb)
diff --git a/drivers/media/IR/keymaps/rc-flyvideo.c b/drivers/media/rc/keymaps/rc-flyvideo.c
index 9c73043cbdb..5bbe6837175 100644
--- a/drivers/media/IR/keymaps/rc-flyvideo.c
+++ b/drivers/media/rc/keymaps/rc-flyvideo.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode flyvideo[] = {
+static struct rc_map_table flyvideo[] = {
 	{ 0x0f, KEY_0 },
 	{ 0x03, KEY_1 },
 	{ 0x04, KEY_2 },
@@ -44,23 +44,23 @@ static struct ir_scancode flyvideo[] = {
 	{ 0x0a, KEY_ANGLE },	/* no label, may be used as the PAUSE button */
 };
 
-static struct rc_keymap flyvideo_map = {
+static struct rc_map_list flyvideo_map = {
 	.map = {
 		.scan    = flyvideo,
 		.size    = ARRAY_SIZE(flyvideo),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_FLYVIDEO,
 	}
 };
 
 static int __init init_rc_map_flyvideo(void)
 {
-	return ir_register_map(&flyvideo_map);
+	return rc_map_register(&flyvideo_map);
 }
 
 static void __exit exit_rc_map_flyvideo(void)
 {
-	ir_unregister_map(&flyvideo_map);
+	rc_map_unregister(&flyvideo_map);
 }
 
 module_init(init_rc_map_flyvideo)
diff --git a/drivers/media/IR/keymaps/rc-fusionhdtv-mce.c b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
index cdb10389b10..c80b25c65b5 100644
--- a/drivers/media/IR/keymaps/rc-fusionhdtv-mce.c
+++ b/drivers/media/rc/keymaps/rc-fusionhdtv-mce.c
@@ -14,7 +14,7 @@
 
 /* DViCO FUSION HDTV MCE remote */
 
-static struct ir_scancode fusionhdtv_mce[] = {
+static struct rc_map_table fusionhdtv_mce[] = {
 
 	{ 0x0b, KEY_1 },
 	{ 0x17, KEY_2 },
@@ -72,23 +72,23 @@ static struct ir_scancode fusionhdtv_mce[] = {
 	{ 0x4e, KEY_POWER },
 };
 
-static struct rc_keymap fusionhdtv_mce_map = {
+static struct rc_map_list fusionhdtv_mce_map = {
 	.map = {
 		.scan    = fusionhdtv_mce,
 		.size    = ARRAY_SIZE(fusionhdtv_mce),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_FUSIONHDTV_MCE,
 	}
 };
 
 static int __init init_rc_map_fusionhdtv_mce(void)
 {
-	return ir_register_map(&fusionhdtv_mce_map);
+	return rc_map_register(&fusionhdtv_mce_map);
 }
 
 static void __exit exit_rc_map_fusionhdtv_mce(void)
 {
-	ir_unregister_map(&fusionhdtv_mce_map);
+	rc_map_unregister(&fusionhdtv_mce_map);
 }
 
 module_init(init_rc_map_fusionhdtv_mce)
diff --git a/drivers/media/IR/keymaps/rc-gadmei-rm008z.c b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
index c16c0d1263a..068c9ead98d 100644
--- a/drivers/media/IR/keymaps/rc-gadmei-rm008z.c
+++ b/drivers/media/rc/keymaps/rc-gadmei-rm008z.c
@@ -16,7 +16,7 @@
    Shine Liu <shinel@foxmail.com>
  */
 
-static struct ir_scancode gadmei_rm008z[] = {
+static struct rc_map_table gadmei_rm008z[] = {
 	{ 0x14, KEY_POWER2},		/* POWER OFF */
 	{ 0x0c, KEY_MUTE},		/* MUTE */
 
@@ -55,23 +55,23 @@ static struct ir_scancode gadmei_rm008z[] = {
 	{ 0x15, KEY_ENTER},		/* OK */
 };
 
-static struct rc_keymap gadmei_rm008z_map = {
+static struct rc_map_list gadmei_rm008z_map = {
 	.map = {
 		.scan    = gadmei_rm008z,
 		.size    = ARRAY_SIZE(gadmei_rm008z),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_GADMEI_RM008Z,
 	}
 };
 
 static int __init init_rc_map_gadmei_rm008z(void)
 {
-	return ir_register_map(&gadmei_rm008z_map);
+	return rc_map_register(&gadmei_rm008z_map);
 }
 
 static void __exit exit_rc_map_gadmei_rm008z(void)
 {
-	ir_unregister_map(&gadmei_rm008z_map);
+	rc_map_unregister(&gadmei_rm008z_map);
 }
 
 module_init(init_rc_map_gadmei_rm008z)
diff --git a/drivers/media/IR/keymaps/rc-genius-tvgo-a11mce.c b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
index 89f8e384e52..cdbbed46792 100644
--- a/drivers/media/IR/keymaps/rc-genius-tvgo-a11mce.c
+++ b/drivers/media/rc/keymaps/rc-genius-tvgo-a11mce.c
@@ -17,7 +17,7 @@
  * Adrian Pardini <pardo.bsso@gmail.com>
  */
 
-static struct ir_scancode genius_tvgo_a11mce[] = {
+static struct rc_map_table genius_tvgo_a11mce[] = {
 	/* Keys 0 to 9 */
 	{ 0x48, KEY_0 },
 	{ 0x09, KEY_1 },
@@ -58,23 +58,23 @@ static struct ir_scancode genius_tvgo_a11mce[] = {
 	{ 0x50, KEY_BLUE },
 };
 
-static struct rc_keymap genius_tvgo_a11mce_map = {
+static struct rc_map_list genius_tvgo_a11mce_map = {
 	.map = {
 		.scan    = genius_tvgo_a11mce,
 		.size    = ARRAY_SIZE(genius_tvgo_a11mce),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_GENIUS_TVGO_A11MCE,
 	}
 };
 
 static int __init init_rc_map_genius_tvgo_a11mce(void)
 {
-	return ir_register_map(&genius_tvgo_a11mce_map);
+	return rc_map_register(&genius_tvgo_a11mce_map);
 }
 
 static void __exit exit_rc_map_genius_tvgo_a11mce(void)
 {
-	ir_unregister_map(&genius_tvgo_a11mce_map);
+	rc_map_unregister(&genius_tvgo_a11mce_map);
 }
 
 module_init(init_rc_map_genius_tvgo_a11mce)
diff --git a/drivers/media/IR/keymaps/rc-gotview7135.c b/drivers/media/rc/keymaps/rc-gotview7135.c
index 52f025bb35f..a38bdde8c14 100644
--- a/drivers/media/IR/keymaps/rc-gotview7135.c
+++ b/drivers/media/rc/keymaps/rc-gotview7135.c
@@ -14,7 +14,7 @@
 
 /* Mike Baikov <mike@baikov.com> */
 
-static struct ir_scancode gotview7135[] = {
+static struct rc_map_table gotview7135[] = {
 
 	{ 0x11, KEY_POWER },
 	{ 0x35, KEY_TV },
@@ -53,23 +53,23 @@ static struct ir_scancode gotview7135[] = {
 	{ 0x38, KEY_F24 },	/* NORMAL TIMESHIFT */
 };
 
-static struct rc_keymap gotview7135_map = {
+static struct rc_map_list gotview7135_map = {
 	.map = {
 		.scan    = gotview7135,
 		.size    = ARRAY_SIZE(gotview7135),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_GOTVIEW7135,
 	}
 };
 
 static int __init init_rc_map_gotview7135(void)
 {
-	return ir_register_map(&gotview7135_map);
+	return rc_map_register(&gotview7135_map);
 }
 
 static void __exit exit_rc_map_gotview7135(void)
 {
-	ir_unregister_map(&gotview7135_map);
+	rc_map_unregister(&gotview7135_map);
 }
 
 module_init(init_rc_map_gotview7135)
diff --git a/drivers/media/IR/keymaps/rc-hauppauge-new.c b/drivers/media/rc/keymaps/rc-hauppauge-new.c
index c6f8cd7c518..bd11da46e56 100644
--- a/drivers/media/IR/keymaps/rc-hauppauge-new.c
+++ b/drivers/media/rc/keymaps/rc-hauppauge-new.c
@@ -16,7 +16,7 @@
  * slightly different versions), shipped with cx88+ivtv cards.
  * almost rc5 coding, but some non-standard keys */
 
-static struct ir_scancode hauppauge_new[] = {
+static struct rc_map_table hauppauge_new[] = {
 	/* Keys 0 to 9 */
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
@@ -74,23 +74,23 @@ static struct ir_scancode hauppauge_new[] = {
 	{ 0x3d, KEY_POWER },		/* system power (green button) */
 };
 
-static struct rc_keymap hauppauge_new_map = {
+static struct rc_map_list hauppauge_new_map = {
 	.map = {
 		.scan    = hauppauge_new,
 		.size    = ARRAY_SIZE(hauppauge_new),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_HAUPPAUGE_NEW,
 	}
 };
 
 static int __init init_rc_map_hauppauge_new(void)
 {
-	return ir_register_map(&hauppauge_new_map);
+	return rc_map_register(&hauppauge_new_map);
 }
 
 static void __exit exit_rc_map_hauppauge_new(void)
 {
-	ir_unregister_map(&hauppauge_new_map);
+	rc_map_unregister(&hauppauge_new_map);
 }
 
 module_init(init_rc_map_hauppauge_new)
diff --git a/drivers/media/IR/keymaps/rc-imon-mce.c b/drivers/media/rc/keymaps/rc-imon-mce.c
index e49f350e3a0..cb67184e015 100644
--- a/drivers/media/IR/keymaps/rc-imon-mce.c
+++ b/drivers/media/rc/keymaps/rc-imon-mce.c
@@ -12,7 +12,7 @@
 #include <media/rc-map.h>
 
 /* mce-mode imon mce remote key table */
-static struct ir_scancode imon_mce[] = {
+static struct rc_map_table imon_mce[] = {
 	/* keys sorted mostly by frequency of use to optimize lookups */
 	{ 0x800ff415, KEY_REWIND },
 	{ 0x800ff414, KEY_FASTFORWARD },
@@ -115,24 +115,24 @@ static struct ir_scancode imon_mce[] = {
 
 };
 
-static struct rc_keymap imon_mce_map = {
+static struct rc_map_list imon_mce_map = {
 	.map = {
 		.scan    = imon_mce,
 		.size    = ARRAY_SIZE(imon_mce),
 		/* its RC6, but w/a hardware decoder */
-		.ir_type = IR_TYPE_RC6,
+		.rc_type = RC_TYPE_RC6,
 		.name    = RC_MAP_IMON_MCE,
 	}
 };
 
 static int __init init_rc_map_imon_mce(void)
 {
-	return ir_register_map(&imon_mce_map);
+	return rc_map_register(&imon_mce_map);
 }
 
 static void __exit exit_rc_map_imon_mce(void)
 {
-	ir_unregister_map(&imon_mce_map);
+	rc_map_unregister(&imon_mce_map);
 }
 
 module_init(init_rc_map_imon_mce)
diff --git a/drivers/media/IR/keymaps/rc-imon-pad.c b/drivers/media/rc/keymaps/rc-imon-pad.c
index bc4db72f02e..eef46b73ca7 100644
--- a/drivers/media/IR/keymaps/rc-imon-pad.c
+++ b/drivers/media/rc/keymaps/rc-imon-pad.c
@@ -17,7 +17,7 @@
  * same remote to different hex codes, and the silkscreened names
  * vary a bit between the SoundGraph and Antec remotes... ugh.
  */
-static struct ir_scancode imon_pad[] = {
+static struct rc_map_table imon_pad[] = {
 	/* keys sorted mostly by frequency of use to optimize lookups */
 	{ 0x2a8195b7, KEY_REWIND },
 	{ 0x298315b7, KEY_REWIND },
@@ -129,24 +129,24 @@ static struct ir_scancode imon_pad[] = {
 	{ 0x29b715b7, KEY_DASHBOARD }, /* AppLauncher */
 };
 
-static struct rc_keymap imon_pad_map = {
+static struct rc_map_list imon_pad_map = {
 	.map = {
 		.scan    = imon_pad,
 		.size    = ARRAY_SIZE(imon_pad),
 		/* actual protocol details unknown, hardware decoder */
-		.ir_type = IR_TYPE_OTHER,
+		.rc_type = RC_TYPE_OTHER,
 		.name    = RC_MAP_IMON_PAD,
 	}
 };
 
 static int __init init_rc_map_imon_pad(void)
 {
-	return ir_register_map(&imon_pad_map);
+	return rc_map_register(&imon_pad_map);
 }
 
 static void __exit exit_rc_map_imon_pad(void)
 {
-	ir_unregister_map(&imon_pad_map);
+	rc_map_unregister(&imon_pad_map);
 }
 
 module_init(init_rc_map_imon_pad)
diff --git a/drivers/media/IR/keymaps/rc-iodata-bctv7e.c b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
index ef6600259fc..1f59e163f75 100644
--- a/drivers/media/IR/keymaps/rc-iodata-bctv7e.c
+++ b/drivers/media/rc/keymaps/rc-iodata-bctv7e.c
@@ -14,7 +14,7 @@
 
 /* IO-DATA BCTV7E Remote */
 
-static struct ir_scancode iodata_bctv7e[] = {
+static struct rc_map_table iodata_bctv7e[] = {
 	{ 0x40, KEY_TV },
 	{ 0x20, KEY_RADIO },		/* FM */
 	{ 0x60, KEY_EPG },
@@ -62,23 +62,23 @@ static struct ir_scancode iodata_bctv7e[] = {
 	{ 0x01, KEY_NEXT },		/* skip >| */
 };
 
-static struct rc_keymap iodata_bctv7e_map = {
+static struct rc_map_list iodata_bctv7e_map = {
 	.map = {
 		.scan    = iodata_bctv7e,
 		.size    = ARRAY_SIZE(iodata_bctv7e),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_IODATA_BCTV7E,
 	}
 };
 
 static int __init init_rc_map_iodata_bctv7e(void)
 {
-	return ir_register_map(&iodata_bctv7e_map);
+	return rc_map_register(&iodata_bctv7e_map);
 }
 
 static void __exit exit_rc_map_iodata_bctv7e(void)
 {
-	ir_unregister_map(&iodata_bctv7e_map);
+	rc_map_unregister(&iodata_bctv7e_map);
 }
 
 module_init(init_rc_map_iodata_bctv7e)
diff --git a/drivers/media/IR/keymaps/rc-kaiomy.c b/drivers/media/rc/keymaps/rc-kaiomy.c
index 4c7883ba0f1..f31dc5c1ad9 100644
--- a/drivers/media/IR/keymaps/rc-kaiomy.c
+++ b/drivers/media/rc/keymaps/rc-kaiomy.c
@@ -16,7 +16,7 @@
    Mauro Carvalho Chehab <mchehab@infradead.org>
  */
 
-static struct ir_scancode kaiomy[] = {
+static struct rc_map_table kaiomy[] = {
 	{ 0x43, KEY_POWER2},
 	{ 0x01, KEY_LIST},
 	{ 0x0b, KEY_ZOOM},
@@ -61,23 +61,23 @@ static struct ir_scancode kaiomy[] = {
 	{ 0x1f, KEY_BLUE},
 };
 
-static struct rc_keymap kaiomy_map = {
+static struct rc_map_list kaiomy_map = {
 	.map = {
 		.scan    = kaiomy,
 		.size    = ARRAY_SIZE(kaiomy),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_KAIOMY,
 	}
 };
 
 static int __init init_rc_map_kaiomy(void)
 {
-	return ir_register_map(&kaiomy_map);
+	return rc_map_register(&kaiomy_map);
 }
 
 static void __exit exit_rc_map_kaiomy(void)
 {
-	ir_unregister_map(&kaiomy_map);
+	rc_map_unregister(&kaiomy_map);
 }
 
 module_init(init_rc_map_kaiomy)
diff --git a/drivers/media/IR/keymaps/rc-kworld-315u.c b/drivers/media/rc/keymaps/rc-kworld-315u.c
index 618c817374e..3ce6ef79fc3 100644
--- a/drivers/media/IR/keymaps/rc-kworld-315u.c
+++ b/drivers/media/rc/keymaps/rc-kworld-315u.c
@@ -15,7 +15,7 @@
 /* Kworld 315U
  */
 
-static struct ir_scancode kworld_315u[] = {
+static struct rc_map_table kworld_315u[] = {
 	{ 0x6143, KEY_POWER },
 	{ 0x6101, KEY_TUNER },		/* source */
 	{ 0x610b, KEY_ZOOM },
@@ -57,23 +57,23 @@ static struct ir_scancode kworld_315u[] = {
 	{ 0x611f, KEY_BLUE },
 };
 
-static struct rc_keymap kworld_315u_map = {
+static struct rc_map_list kworld_315u_map = {
 	.map = {
 		.scan    = kworld_315u,
 		.size    = ARRAY_SIZE(kworld_315u),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_KWORLD_315U,
 	}
 };
 
 static int __init init_rc_map_kworld_315u(void)
 {
-	return ir_register_map(&kworld_315u_map);
+	return rc_map_register(&kworld_315u_map);
 }
 
 static void __exit exit_rc_map_kworld_315u(void)
 {
-	ir_unregister_map(&kworld_315u_map);
+	rc_map_unregister(&kworld_315u_map);
 }
 
 module_init(init_rc_map_kworld_315u)
diff --git a/drivers/media/IR/keymaps/rc-kworld-plus-tv-analog.c b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
index 366732f1f7b..e45f0b8759d 100644
--- a/drivers/media/IR/keymaps/rc-kworld-plus-tv-analog.c
+++ b/drivers/media/rc/keymaps/rc-kworld-plus-tv-analog.c
@@ -16,7 +16,7 @@
    Mauro Carvalho Chehab <mchehab@infradead.org>
  */
 
-static struct ir_scancode kworld_plus_tv_analog[] = {
+static struct rc_map_table kworld_plus_tv_analog[] = {
 	{ 0x0c, KEY_PROG1 },		/* Kworld key */
 	{ 0x16, KEY_CLOSECD },		/* -> ) */
 	{ 0x1d, KEY_POWER2 },
@@ -73,23 +73,23 @@ static struct ir_scancode kworld_plus_tv_analog[] = {
 	{ 0x23, KEY_GREEN},		/* C */
 };
 
-static struct rc_keymap kworld_plus_tv_analog_map = {
+static struct rc_map_list kworld_plus_tv_analog_map = {
 	.map = {
 		.scan    = kworld_plus_tv_analog,
 		.size    = ARRAY_SIZE(kworld_plus_tv_analog),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_KWORLD_PLUS_TV_ANALOG,
 	}
 };
 
 static int __init init_rc_map_kworld_plus_tv_analog(void)
 {
-	return ir_register_map(&kworld_plus_tv_analog_map);
+	return rc_map_register(&kworld_plus_tv_analog_map);
 }
 
 static void __exit exit_rc_map_kworld_plus_tv_analog(void)
 {
-	ir_unregister_map(&kworld_plus_tv_analog_map);
+	rc_map_unregister(&kworld_plus_tv_analog_map);
 }
 
 module_init(init_rc_map_kworld_plus_tv_analog)
diff --git a/drivers/media/IR/keymaps/rc-leadtek-y04g0051.c b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
index 7521315fd87..8faa54ff16e 100644
--- a/drivers/media/IR/keymaps/rc-leadtek-y04g0051.c
+++ b/drivers/media/rc/keymaps/rc-leadtek-y04g0051.c
@@ -20,7 +20,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode leadtek_y04g0051[] = {
+static struct rc_map_table leadtek_y04g0051[] = {
 	{ 0x0300, KEY_POWER2 },
 	{ 0x0303, KEY_SCREEN },
 	{ 0x0304, KEY_RIGHT },
@@ -73,23 +73,23 @@ static struct ir_scancode leadtek_y04g0051[] = {
 	{ 0x035f, KEY_CHANNELDOWN },
 };
 
-static struct rc_keymap leadtek_y04g0051_map = {
+static struct rc_map_list leadtek_y04g0051_map = {
 	.map = {
 		.scan    = leadtek_y04g0051,
 		.size    = ARRAY_SIZE(leadtek_y04g0051),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_LEADTEK_Y04G0051,
 	}
 };
 
 static int __init init_rc_map_leadtek_y04g0051(void)
 {
-	return ir_register_map(&leadtek_y04g0051_map);
+	return rc_map_register(&leadtek_y04g0051_map);
 }
 
 static void __exit exit_rc_map_leadtek_y04g0051(void)
 {
-	ir_unregister_map(&leadtek_y04g0051_map);
+	rc_map_unregister(&leadtek_y04g0051_map);
 }
 
 module_init(init_rc_map_leadtek_y04g0051)
diff --git a/drivers/media/IR/keymaps/rc-lirc.c b/drivers/media/rc/keymaps/rc-lirc.c
index 43fcf903508..e8e23e233c3 100644
--- a/drivers/media/IR/keymaps/rc-lirc.c
+++ b/drivers/media/rc/keymaps/rc-lirc.c
@@ -9,29 +9,29 @@
  * (at your option) any later version.
  */
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
-static struct ir_scancode lirc[] = {
+static struct rc_map_table lirc[] = {
 	{ },
 };
 
-static struct rc_keymap lirc_map = {
+static struct rc_map_list lirc_map = {
 	.map = {
 		.scan    = lirc,
 		.size    = ARRAY_SIZE(lirc),
-		.ir_type = IR_TYPE_LIRC,
+		.rc_type = RC_TYPE_LIRC,
 		.name    = RC_MAP_LIRC,
 	}
 };
 
 static int __init init_rc_map_lirc(void)
 {
-	return ir_register_map(&lirc_map);
+	return rc_map_register(&lirc_map);
 }
 
 static void __exit exit_rc_map_lirc(void)
 {
-	ir_unregister_map(&lirc_map);
+	rc_map_unregister(&lirc_map);
 }
 
 module_init(init_rc_map_lirc)
diff --git a/drivers/media/IR/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c
index 40dcf0b4e21..875cd81477c 100644
--- a/drivers/media/IR/keymaps/rc-lme2510.c
+++ b/drivers/media/rc/keymaps/rc-lme2510.c
@@ -12,7 +12,7 @@
 #include <media/rc-map.h>
 
 
-static struct ir_scancode lme2510_rc[] = {
+static struct rc_map_table lme2510_rc[] = {
 	{ 0xba45, KEY_0 },
 	{ 0xa05f, KEY_1 },
 	{ 0xaf50, KEY_2 },
@@ -42,23 +42,23 @@ static struct ir_scancode lme2510_rc[] = {
 
 };
 
-static struct rc_keymap lme2510_map = {
+static struct rc_map_list lme2510_map = {
 	.map = {
 		.scan    = lme2510_rc,
 		.size    = ARRAY_SIZE(lme2510_rc),
-		.ir_type = IR_TYPE_UNKNOWN,
+		.rc_type = RC_TYPE_UNKNOWN,
 		.name    = RC_MAP_LME2510,
 	}
 };
 
 static int __init init_rc_lme2510_map(void)
 {
-	return ir_register_map(&lme2510_map);
+	return rc_map_register(&lme2510_map);
 }
 
 static void __exit exit_rc_lme2510_map(void)
 {
-	ir_unregister_map(&lme2510_map);
+	rc_map_unregister(&lme2510_map);
 }
 
 module_init(init_rc_lme2510_map)
diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/rc/keymaps/rc-manli.c
index 0f590b3d01c..23b2d04e7a9 100644
--- a/drivers/media/IR/keymaps/rc-manli.c
+++ b/drivers/media/rc/keymaps/rc-manli.c
@@ -21,7 +21,7 @@
    helps to descide which keycodes to assign to the buttons.
  */
 
-static struct ir_scancode manli[] = {
+static struct rc_map_table manli[] = {
 
 	/*  0x1c            0x12  *
 	 * FUNCTION         POWER *
@@ -108,23 +108,23 @@ static struct ir_scancode manli[] = {
 	/* 0x1d unused ? */
 };
 
-static struct rc_keymap manli_map = {
+static struct rc_map_list manli_map = {
 	.map = {
 		.scan    = manli,
 		.size    = ARRAY_SIZE(manli),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_MANLI,
 	}
 };
 
 static int __init init_rc_map_manli(void)
 {
-	return ir_register_map(&manli_map);
+	return rc_map_register(&manli_map);
 }
 
 static void __exit exit_rc_map_manli(void)
 {
-	ir_unregister_map(&manli_map);
+	rc_map_unregister(&manli_map);
 }
 
 module_init(init_rc_map_manli)
diff --git a/drivers/media/IR/keymaps/rc-msi-digivox-ii.c b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
index 67237fbf9e4..7b9a01b6e4c 100644
--- a/drivers/media/IR/keymaps/rc-msi-digivox-ii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-ii.c
@@ -20,7 +20,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode msi_digivox_ii[] = {
+static struct rc_map_table msi_digivox_ii[] = {
 	{ 0x0002, KEY_2 },
 	{ 0x0003, KEY_UP },              /* up */
 	{ 0x0004, KEY_3 },
@@ -41,23 +41,23 @@ static struct ir_scancode msi_digivox_ii[] = {
 	{ 0x001f, KEY_VOLUMEDOWN },
 };
 
-static struct rc_keymap msi_digivox_ii_map = {
+static struct rc_map_list msi_digivox_ii_map = {
 	.map = {
 		.scan    = msi_digivox_ii,
 		.size    = ARRAY_SIZE(msi_digivox_ii),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_MSI_DIGIVOX_II,
 	}
 };
 
 static int __init init_rc_map_msi_digivox_ii(void)
 {
-	return ir_register_map(&msi_digivox_ii_map);
+	return rc_map_register(&msi_digivox_ii_map);
 }
 
 static void __exit exit_rc_map_msi_digivox_ii(void)
 {
-	ir_unregister_map(&msi_digivox_ii_map);
+	rc_map_unregister(&msi_digivox_ii_map);
 }
 
 module_init(init_rc_map_msi_digivox_ii)
diff --git a/drivers/media/IR/keymaps/rc-msi-digivox-iii.c b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
index 882056e52ef..ae9d06b3915 100644
--- a/drivers/media/IR/keymaps/rc-msi-digivox-iii.c
+++ b/drivers/media/rc/keymaps/rc-msi-digivox-iii.c
@@ -24,7 +24,7 @@
 /* Uses NEC extended 0x61d6. */
 /* This remote seems to be same as rc-kworld-315u.c. Anyhow, add new remote
    since rc-kworld-315u.c lacks NEC extended address byte. */
-static struct ir_scancode msi_digivox_iii[] = {
+static struct rc_map_table msi_digivox_iii[] = {
 	{ 0x61d601, KEY_VIDEO },           /* Source */
 	{ 0x61d602, KEY_3 },
 	{ 0x61d603, KEY_POWER },           /* ShutDown */
@@ -59,23 +59,23 @@ static struct ir_scancode msi_digivox_iii[] = {
 	{ 0x61d643, KEY_POWER2 },          /* [red power button] */
 };
 
-static struct rc_keymap msi_digivox_iii_map = {
+static struct rc_map_list msi_digivox_iii_map = {
 	.map = {
 		.scan    = msi_digivox_iii,
 		.size    = ARRAY_SIZE(msi_digivox_iii),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_MSI_DIGIVOX_III,
 	}
 };
 
 static int __init init_rc_map_msi_digivox_iii(void)
 {
-	return ir_register_map(&msi_digivox_iii_map);
+	return rc_map_register(&msi_digivox_iii_map);
 }
 
 static void __exit exit_rc_map_msi_digivox_iii(void)
 {
-	ir_unregister_map(&msi_digivox_iii_map);
+	rc_map_unregister(&msi_digivox_iii_map);
 }
 
 module_init(init_rc_map_msi_digivox_iii)
diff --git a/drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
index eb8e42c18ff..fa8fd0ab94c 100644
--- a/drivers/media/IR/keymaps/rc-msi-tvanywhere-plus.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere-plus.c
@@ -26,7 +26,7 @@
   Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
 */
 
-static struct ir_scancode msi_tvanywhere_plus[] = {
+static struct rc_map_table msi_tvanywhere_plus[] = {
 
 /*  ---- Remote Button Layout ----
 
@@ -97,23 +97,23 @@ static struct ir_scancode msi_tvanywhere_plus[] = {
 	{ 0x1d, KEY_RESTART },		/* Reset */
 };
 
-static struct rc_keymap msi_tvanywhere_plus_map = {
+static struct rc_map_list msi_tvanywhere_plus_map = {
 	.map = {
 		.scan    = msi_tvanywhere_plus,
 		.size    = ARRAY_SIZE(msi_tvanywhere_plus),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_MSI_TVANYWHERE_PLUS,
 	}
 };
 
 static int __init init_rc_map_msi_tvanywhere_plus(void)
 {
-	return ir_register_map(&msi_tvanywhere_plus_map);
+	return rc_map_register(&msi_tvanywhere_plus_map);
 }
 
 static void __exit exit_rc_map_msi_tvanywhere_plus(void)
 {
-	ir_unregister_map(&msi_tvanywhere_plus_map);
+	rc_map_unregister(&msi_tvanywhere_plus_map);
 }
 
 module_init(init_rc_map_msi_tvanywhere_plus)
diff --git a/drivers/media/IR/keymaps/rc-msi-tvanywhere.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
index ef411854f06..18b37facb0d 100644
--- a/drivers/media/IR/keymaps/rc-msi-tvanywhere.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
@@ -14,7 +14,7 @@
 
 /* MSI TV@nywhere MASTER remote */
 
-static struct ir_scancode msi_tvanywhere[] = {
+static struct rc_map_table msi_tvanywhere[] = {
 	/* Keys 0 to 9 */
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
@@ -43,23 +43,23 @@ static struct ir_scancode msi_tvanywhere[] = {
 	{ 0x1f, KEY_VOLUMEDOWN },
 };
 
-static struct rc_keymap msi_tvanywhere_map = {
+static struct rc_map_list msi_tvanywhere_map = {
 	.map = {
 		.scan    = msi_tvanywhere,
 		.size    = ARRAY_SIZE(msi_tvanywhere),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_MSI_TVANYWHERE,
 	}
 };
 
 static int __init init_rc_map_msi_tvanywhere(void)
 {
-	return ir_register_map(&msi_tvanywhere_map);
+	return rc_map_register(&msi_tvanywhere_map);
 }
 
 static void __exit exit_rc_map_msi_tvanywhere(void)
 {
-	ir_unregister_map(&msi_tvanywhere_map);
+	rc_map_unregister(&msi_tvanywhere_map);
 }
 
 module_init(init_rc_map_msi_tvanywhere)
diff --git a/drivers/media/IR/keymaps/rc-nebula.c b/drivers/media/rc/keymaps/rc-nebula.c
index ccc50eb402e..3e6f077eb70 100644
--- a/drivers/media/IR/keymaps/rc-nebula.c
+++ b/drivers/media/rc/keymaps/rc-nebula.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode nebula[] = {
+static struct rc_map_table nebula[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
@@ -70,23 +70,23 @@ static struct ir_scancode nebula[] = {
 	{ 0x36, KEY_PC },
 };
 
-static struct rc_keymap nebula_map = {
+static struct rc_map_list nebula_map = {
 	.map = {
 		.scan    = nebula,
 		.size    = ARRAY_SIZE(nebula),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_NEBULA,
 	}
 };
 
 static int __init init_rc_map_nebula(void)
 {
-	return ir_register_map(&nebula_map);
+	return rc_map_register(&nebula_map);
 }
 
 static void __exit exit_rc_map_nebula(void)
 {
-	ir_unregister_map(&nebula_map);
+	rc_map_unregister(&nebula_map);
 }
 
 module_init(init_rc_map_nebula)
diff --git a/drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
index e1b54d20db6..26f114c5c0d 100644
--- a/drivers/media/IR/keymaps/rc-nec-terratec-cinergy-xs.c
+++ b/drivers/media/rc/keymaps/rc-nec-terratec-cinergy-xs.c
@@ -16,7 +16,7 @@
    Mauro Carvalho Chehab <mchehab@redhat.com>
  */
 
-static struct ir_scancode nec_terratec_cinergy_xs[] = {
+static struct rc_map_table nec_terratec_cinergy_xs[] = {
 	{ 0x1441, KEY_HOME},
 	{ 0x1401, KEY_POWER2},
 
@@ -79,23 +79,23 @@ static struct ir_scancode nec_terratec_cinergy_xs[] = {
 	{ 0x145c, KEY_NEXT},
 };
 
-static struct rc_keymap nec_terratec_cinergy_xs_map = {
+static struct rc_map_list nec_terratec_cinergy_xs_map = {
 	.map = {
 		.scan    = nec_terratec_cinergy_xs,
 		.size    = ARRAY_SIZE(nec_terratec_cinergy_xs),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 	}
 };
 
 static int __init init_rc_map_nec_terratec_cinergy_xs(void)
 {
-	return ir_register_map(&nec_terratec_cinergy_xs_map);
+	return rc_map_register(&nec_terratec_cinergy_xs_map);
 }
 
 static void __exit exit_rc_map_nec_terratec_cinergy_xs(void)
 {
-	ir_unregister_map(&nec_terratec_cinergy_xs_map);
+	rc_map_unregister(&nec_terratec_cinergy_xs_map);
 }
 
 module_init(init_rc_map_nec_terratec_cinergy_xs)
diff --git a/drivers/media/IR/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c
index e5849a6b3f0..629ee9d8453 100644
--- a/drivers/media/IR/keymaps/rc-norwood.c
+++ b/drivers/media/rc/keymaps/rc-norwood.c
@@ -16,7 +16,7 @@
    By Peter Naulls <peter@chocky.org>
    Key comments are the functions given in the manual */
 
-static struct ir_scancode norwood[] = {
+static struct rc_map_table norwood[] = {
 	/* Keys 0 to 9 */
 	{ 0x20, KEY_0 },
 	{ 0x21, KEY_1 },
@@ -59,23 +59,23 @@ static struct ir_scancode norwood[] = {
 	{ 0x65, KEY_POWER },		/* Computer power      */
 };
 
-static struct rc_keymap norwood_map = {
+static struct rc_map_list norwood_map = {
 	.map = {
 		.scan    = norwood,
 		.size    = ARRAY_SIZE(norwood),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_NORWOOD,
 	}
 };
 
 static int __init init_rc_map_norwood(void)
 {
-	return ir_register_map(&norwood_map);
+	return rc_map_register(&norwood_map);
 }
 
 static void __exit exit_rc_map_norwood(void)
 {
-	ir_unregister_map(&norwood_map);
+	rc_map_unregister(&norwood_map);
 }
 
 module_init(init_rc_map_norwood)
diff --git a/drivers/media/IR/keymaps/rc-npgtech.c b/drivers/media/rc/keymaps/rc-npgtech.c
index b9ece1e9029..4aa588bf6d6 100644
--- a/drivers/media/IR/keymaps/rc-npgtech.c
+++ b/drivers/media/rc/keymaps/rc-npgtech.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode npgtech[] = {
+static struct rc_map_table npgtech[] = {
 	{ 0x1d, KEY_SWITCHVIDEOMODE },	/* switch inputs */
 	{ 0x2a, KEY_FRONT },
 
@@ -54,23 +54,23 @@ static struct ir_scancode npgtech[] = {
 
 };
 
-static struct rc_keymap npgtech_map = {
+static struct rc_map_list npgtech_map = {
 	.map = {
 		.scan    = npgtech,
 		.size    = ARRAY_SIZE(npgtech),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_NPGTECH,
 	}
 };
 
 static int __init init_rc_map_npgtech(void)
 {
-	return ir_register_map(&npgtech_map);
+	return rc_map_register(&npgtech_map);
 }
 
 static void __exit exit_rc_map_npgtech(void)
 {
-	ir_unregister_map(&npgtech_map);
+	rc_map_unregister(&npgtech_map);
 }
 
 module_init(init_rc_map_npgtech)
diff --git a/drivers/media/IR/keymaps/rc-pctv-sedna.c b/drivers/media/rc/keymaps/rc-pctv-sedna.c
index 4129bb44a25..fa5ae5981eb 100644
--- a/drivers/media/IR/keymaps/rc-pctv-sedna.c
+++ b/drivers/media/rc/keymaps/rc-pctv-sedna.c
@@ -17,7 +17,7 @@
    Pavel Mihaylov <bin@bash.info>
    Also for the remote bundled with Kozumi KTV-01C card */
 
-static struct ir_scancode pctv_sedna[] = {
+static struct rc_map_table pctv_sedna[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
@@ -54,23 +54,23 @@ static struct ir_scancode pctv_sedna[] = {
 	{ 0x1f, KEY_PLAY },	/* Play */
 };
 
-static struct rc_keymap pctv_sedna_map = {
+static struct rc_map_list pctv_sedna_map = {
 	.map = {
 		.scan    = pctv_sedna,
 		.size    = ARRAY_SIZE(pctv_sedna),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PCTV_SEDNA,
 	}
 };
 
 static int __init init_rc_map_pctv_sedna(void)
 {
-	return ir_register_map(&pctv_sedna_map);
+	return rc_map_register(&pctv_sedna_map);
 }
 
 static void __exit exit_rc_map_pctv_sedna(void)
 {
-	ir_unregister_map(&pctv_sedna_map);
+	rc_map_unregister(&pctv_sedna_map);
 }
 
 module_init(init_rc_map_pctv_sedna)
diff --git a/drivers/media/IR/keymaps/rc-pinnacle-color.c b/drivers/media/rc/keymaps/rc-pinnacle-color.c
index 326e023ce12..23b8c505c6a 100644
--- a/drivers/media/IR/keymaps/rc-pinnacle-color.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-color.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode pinnacle_color[] = {
+static struct rc_map_table pinnacle_color[] = {
 	{ 0x59, KEY_MUTE },
 	{ 0x4a, KEY_POWER },
 
@@ -68,23 +68,23 @@ static struct ir_scancode pinnacle_color[] = {
 	{ 0x0a, KEY_BACKSPACE },
 };
 
-static struct rc_keymap pinnacle_color_map = {
+static struct rc_map_list pinnacle_color_map = {
 	.map = {
 		.scan    = pinnacle_color,
 		.size    = ARRAY_SIZE(pinnacle_color),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PINNACLE_COLOR,
 	}
 };
 
 static int __init init_rc_map_pinnacle_color(void)
 {
-	return ir_register_map(&pinnacle_color_map);
+	return rc_map_register(&pinnacle_color_map);
 }
 
 static void __exit exit_rc_map_pinnacle_color(void)
 {
-	ir_unregister_map(&pinnacle_color_map);
+	rc_map_unregister(&pinnacle_color_map);
 }
 
 module_init(init_rc_map_pinnacle_color)
diff --git a/drivers/media/IR/keymaps/rc-pinnacle-grey.c b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
index 14cb772515c..6ba8c368d10 100644
--- a/drivers/media/IR/keymaps/rc-pinnacle-grey.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-grey.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode pinnacle_grey[] = {
+static struct rc_map_table pinnacle_grey[] = {
 	{ 0x3a, KEY_0 },
 	{ 0x31, KEY_1 },
 	{ 0x32, KEY_2 },
@@ -63,23 +63,23 @@ static struct ir_scancode pinnacle_grey[] = {
 	{ 0x18, KEY_EPG },
 };
 
-static struct rc_keymap pinnacle_grey_map = {
+static struct rc_map_list pinnacle_grey_map = {
 	.map = {
 		.scan    = pinnacle_grey,
 		.size    = ARRAY_SIZE(pinnacle_grey),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PINNACLE_GREY,
 	}
 };
 
 static int __init init_rc_map_pinnacle_grey(void)
 {
-	return ir_register_map(&pinnacle_grey_map);
+	return rc_map_register(&pinnacle_grey_map);
 }
 
 static void __exit exit_rc_map_pinnacle_grey(void)
 {
-	ir_unregister_map(&pinnacle_grey_map);
+	rc_map_unregister(&pinnacle_grey_map);
 }
 
 module_init(init_rc_map_pinnacle_grey)
diff --git a/drivers/media/IR/keymaps/rc-pinnacle-pctv-hd.c b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
index 835bf4ef8de..bb10ffe086b 100644
--- a/drivers/media/IR/keymaps/rc-pinnacle-pctv-hd.c
+++ b/drivers/media/rc/keymaps/rc-pinnacle-pctv-hd.c
@@ -14,7 +14,7 @@
 
 /* Pinnacle PCTV HD 800i mini remote */
 
-static struct ir_scancode pinnacle_pctv_hd[] = {
+static struct rc_map_table pinnacle_pctv_hd[] = {
 
 	{ 0x0f, KEY_1 },
 	{ 0x15, KEY_2 },
@@ -47,23 +47,23 @@ static struct ir_scancode pinnacle_pctv_hd[] = {
 	{ 0x3f, KEY_EPG },	/* Labeled "?" */
 };
 
-static struct rc_keymap pinnacle_pctv_hd_map = {
+static struct rc_map_list pinnacle_pctv_hd_map = {
 	.map = {
 		.scan    = pinnacle_pctv_hd,
 		.size    = ARRAY_SIZE(pinnacle_pctv_hd),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PINNACLE_PCTV_HD,
 	}
 };
 
 static int __init init_rc_map_pinnacle_pctv_hd(void)
 {
-	return ir_register_map(&pinnacle_pctv_hd_map);
+	return rc_map_register(&pinnacle_pctv_hd_map);
 }
 
 static void __exit exit_rc_map_pinnacle_pctv_hd(void)
 {
-	ir_unregister_map(&pinnacle_pctv_hd_map);
+	rc_map_unregister(&pinnacle_pctv_hd_map);
 }
 
 module_init(init_rc_map_pinnacle_pctv_hd)
diff --git a/drivers/media/rc/keymaps/rc-pixelview-002t.c b/drivers/media/rc/keymaps/rc-pixelview-002t.c
new file mode 100644
index 00000000000..e5ab071f635
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-pixelview-002t.c
@@ -0,0 +1,77 @@
+/* rc-pixelview-mk12.h - Keytable for pixelview Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/*
+ * Keytable for 002-T IR remote provided together with Pixelview
+ * SBTVD Hybrid Remote Controller. Uses NEC extended format.
+ */
+static struct rc_map_table pixelview_002t[] = {
+	{ 0x866b13, KEY_MUTE },
+	{ 0x866b12, KEY_POWER2 },	/* power */
+
+	{ 0x866b01, KEY_1 },
+	{ 0x866b02, KEY_2 },
+	{ 0x866b03, KEY_3 },
+	{ 0x866b04, KEY_4 },
+	{ 0x866b05, KEY_5 },
+	{ 0x866b06, KEY_6 },
+	{ 0x866b07, KEY_7 },
+	{ 0x866b08, KEY_8 },
+	{ 0x866b09, KEY_9 },
+	{ 0x866b00, KEY_0 },
+
+	{ 0x866b0d, KEY_CHANNELUP },
+	{ 0x866b19, KEY_CHANNELDOWN },
+	{ 0x866b10, KEY_VOLUMEUP },	/* vol + */
+	{ 0x866b0c, KEY_VOLUMEDOWN },	/* vol - */
+
+	{ 0x866b0a, KEY_CAMERA },	/* snapshot */
+	{ 0x866b0b, KEY_ZOOM },		/* zoom */
+
+	{ 0x866b1b, KEY_BACKSPACE },
+	{ 0x866b15, KEY_ENTER },
+
+	{ 0x866b1d, KEY_UP },
+	{ 0x866b1e, KEY_DOWN },
+	{ 0x866b0e, KEY_LEFT },
+	{ 0x866b0f, KEY_RIGHT },
+
+	{ 0x866b18, KEY_RECORD },
+	{ 0x866b1a, KEY_STOP },
+};
+
+static struct rc_map_list pixelview_map = {
+	.map = {
+		.scan    = pixelview_002t,
+		.size    = ARRAY_SIZE(pixelview_002t),
+		.rc_type = RC_TYPE_NEC,
+		.name    = RC_MAP_PIXELVIEW_002T,
+	}
+};
+
+static int __init init_rc_map_pixelview(void)
+{
+	return rc_map_register(&pixelview_map);
+}
+
+static void __exit exit_rc_map_pixelview(void)
+{
+	rc_map_unregister(&pixelview_map);
+}
+
+module_init(init_rc_map_pixelview)
+module_exit(exit_rc_map_pixelview)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-pixelview-mk12.c b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
index 5a735d569a8..8d9f664e0a2 100644
--- a/drivers/media/IR/keymaps/rc-pixelview-mk12.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-mk12.c
@@ -16,7 +16,7 @@
  * Keytable for MK-F12 IR remote provided together with Pixelview
  * Ultra Pro Remote Controller. Uses NEC extended format.
  */
-static struct ir_scancode pixelview_mk12[] = {
+static struct rc_map_table pixelview_mk12[] = {
 	{ 0x866b03, KEY_TUNER },	/* Timeshift */
 	{ 0x866b1e, KEY_POWER2 },	/* power */
 
@@ -57,23 +57,23 @@ static struct ir_scancode pixelview_mk12[] = {
 	{ 0x866b07, KEY_RADIO },	/* FM */
 };
 
-static struct rc_keymap pixelview_map = {
+static struct rc_map_list pixelview_map = {
 	.map = {
 		.scan    = pixelview_mk12,
 		.size    = ARRAY_SIZE(pixelview_mk12),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_PIXELVIEW_MK12,
 	}
 };
 
 static int __init init_rc_map_pixelview(void)
 {
-	return ir_register_map(&pixelview_map);
+	return rc_map_register(&pixelview_map);
 }
 
 static void __exit exit_rc_map_pixelview(void)
 {
-	ir_unregister_map(&pixelview_map);
+	rc_map_unregister(&pixelview_map);
 }
 
 module_init(init_rc_map_pixelview)
diff --git a/drivers/media/IR/keymaps/rc-pixelview-new.c b/drivers/media/rc/keymaps/rc-pixelview-new.c
index 7bbbbf5735e..777a70076be 100644
--- a/drivers/media/IR/keymaps/rc-pixelview-new.c
+++ b/drivers/media/rc/keymaps/rc-pixelview-new.c
@@ -17,7 +17,7 @@
    present on PV MPEG 8000GT
  */
 
-static struct ir_scancode pixelview_new[] = {
+static struct rc_map_table pixelview_new[] = {
 	{ 0x3c, KEY_TIME },		/* Timeshift */
 	{ 0x12, KEY_POWER },
 
@@ -57,23 +57,23 @@ static struct ir_scancode pixelview_new[] = {
 	{ 0x34, KEY_RADIO },
 };
 
-static struct rc_keymap pixelview_new_map = {
+static struct rc_map_list pixelview_new_map = {
 	.map = {
 		.scan    = pixelview_new,
 		.size    = ARRAY_SIZE(pixelview_new),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PIXELVIEW_NEW,
 	}
 };
 
 static int __init init_rc_map_pixelview_new(void)
 {
-	return ir_register_map(&pixelview_new_map);
+	return rc_map_register(&pixelview_new_map);
 }
 
 static void __exit exit_rc_map_pixelview_new(void)
 {
-	ir_unregister_map(&pixelview_new_map);
+	rc_map_unregister(&pixelview_new_map);
 }
 
 module_init(init_rc_map_pixelview_new)
diff --git a/drivers/media/IR/keymaps/rc-pixelview.c b/drivers/media/rc/keymaps/rc-pixelview.c
index 82ff12e182a..0ec5988916b 100644
--- a/drivers/media/IR/keymaps/rc-pixelview.c
+++ b/drivers/media/rc/keymaps/rc-pixelview.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode pixelview[] = {
+static struct rc_map_table pixelview[] = {
 
 	{ 0x1e, KEY_POWER },	/* power */
 	{ 0x07, KEY_MEDIA },	/* source */
@@ -56,23 +56,23 @@ static struct ir_scancode pixelview[] = {
 	{ 0x18, KEY_MUTE },		/* mute/unmute */
 };
 
-static struct rc_keymap pixelview_map = {
+static struct rc_map_list pixelview_map = {
 	.map = {
 		.scan    = pixelview,
 		.size    = ARRAY_SIZE(pixelview),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PIXELVIEW,
 	}
 };
 
 static int __init init_rc_map_pixelview(void)
 {
-	return ir_register_map(&pixelview_map);
+	return rc_map_register(&pixelview_map);
 }
 
 static void __exit exit_rc_map_pixelview(void)
 {
-	ir_unregister_map(&pixelview_map);
+	rc_map_unregister(&pixelview_map);
 }
 
 module_init(init_rc_map_pixelview)
diff --git a/drivers/media/IR/keymaps/rc-powercolor-real-angel.c b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
index 7cef8190a22..5f9d546a86c 100644
--- a/drivers/media/IR/keymaps/rc-powercolor-real-angel.c
+++ b/drivers/media/rc/keymaps/rc-powercolor-real-angel.c
@@ -17,7 +17,7 @@
  * Daniel Fraga <fragabr@gmail.com>
  */
 
-static struct ir_scancode powercolor_real_angel[] = {
+static struct rc_map_table powercolor_real_angel[] = {
 	{ 0x38, KEY_SWITCHVIDEOMODE },	/* switch inputs */
 	{ 0x0c, KEY_MEDIA },		/* Turn ON/OFF App */
 	{ 0x00, KEY_0 },
@@ -55,23 +55,23 @@ static struct ir_scancode powercolor_real_angel[] = {
 	{ 0x25, KEY_POWER },		/* power */
 };
 
-static struct rc_keymap powercolor_real_angel_map = {
+static struct rc_map_list powercolor_real_angel_map = {
 	.map = {
 		.scan    = powercolor_real_angel,
 		.size    = ARRAY_SIZE(powercolor_real_angel),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_POWERCOLOR_REAL_ANGEL,
 	}
 };
 
 static int __init init_rc_map_powercolor_real_angel(void)
 {
-	return ir_register_map(&powercolor_real_angel_map);
+	return rc_map_register(&powercolor_real_angel_map);
 }
 
 static void __exit exit_rc_map_powercolor_real_angel(void)
 {
-	ir_unregister_map(&powercolor_real_angel_map);
+	rc_map_unregister(&powercolor_real_angel_map);
 }
 
 module_init(init_rc_map_powercolor_real_angel)
diff --git a/drivers/media/IR/keymaps/rc-proteus-2309.c b/drivers/media/rc/keymaps/rc-proteus-2309.c
index 22e92d39dee..8a3a643879d 100644
--- a/drivers/media/IR/keymaps/rc-proteus-2309.c
+++ b/drivers/media/rc/keymaps/rc-proteus-2309.c
@@ -14,7 +14,7 @@
 
 /* Michal Majchrowicz <mmajchrowicz@gmail.com> */
 
-static struct ir_scancode proteus_2309[] = {
+static struct rc_map_table proteus_2309[] = {
 	/* numeric */
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
@@ -43,23 +43,23 @@ static struct ir_scancode proteus_2309[] = {
 	{ 0x14, KEY_F1 },
 };
 
-static struct rc_keymap proteus_2309_map = {
+static struct rc_map_list proteus_2309_map = {
 	.map = {
 		.scan    = proteus_2309,
 		.size    = ARRAY_SIZE(proteus_2309),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PROTEUS_2309,
 	}
 };
 
 static int __init init_rc_map_proteus_2309(void)
 {
-	return ir_register_map(&proteus_2309_map);
+	return rc_map_register(&proteus_2309_map);
 }
 
 static void __exit exit_rc_map_proteus_2309(void)
 {
-	ir_unregister_map(&proteus_2309_map);
+	rc_map_unregister(&proteus_2309_map);
 }
 
 module_init(init_rc_map_proteus_2309)
diff --git a/drivers/media/IR/keymaps/rc-purpletv.c b/drivers/media/rc/keymaps/rc-purpletv.c
index 4e20fc2269f..ef90296bfd6 100644
--- a/drivers/media/IR/keymaps/rc-purpletv.c
+++ b/drivers/media/rc/keymaps/rc-purpletv.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode purpletv[] = {
+static struct rc_map_table purpletv[] = {
 	{ 0x03, KEY_POWER },
 	{ 0x6f, KEY_MUTE },
 	{ 0x10, KEY_BACKSPACE },	/* Recall */
@@ -55,23 +55,23 @@ static struct ir_scancode purpletv[] = {
 
 };
 
-static struct rc_keymap purpletv_map = {
+static struct rc_map_list purpletv_map = {
 	.map = {
 		.scan    = purpletv,
 		.size    = ARRAY_SIZE(purpletv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PURPLETV,
 	}
 };
 
 static int __init init_rc_map_purpletv(void)
 {
-	return ir_register_map(&purpletv_map);
+	return rc_map_register(&purpletv_map);
 }
 
 static void __exit exit_rc_map_purpletv(void)
 {
-	ir_unregister_map(&purpletv_map);
+	rc_map_unregister(&purpletv_map);
 }
 
 module_init(init_rc_map_purpletv)
diff --git a/drivers/media/IR/keymaps/rc-pv951.c b/drivers/media/rc/keymaps/rc-pv951.c
index 36679e706cf..83a418de12c 100644
--- a/drivers/media/IR/keymaps/rc-pv951.c
+++ b/drivers/media/rc/keymaps/rc-pv951.c
@@ -14,7 +14,7 @@
 
 /* Mark Phalan <phalanm@o2.ie> */
 
-static struct ir_scancode pv951[] = {
+static struct rc_map_table pv951[] = {
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
 	{ 0x02, KEY_2 },
@@ -52,23 +52,23 @@ static struct ir_scancode pv951[] = {
 	{ 0x1c, KEY_MEDIA },		/* PC/TV */
 };
 
-static struct rc_keymap pv951_map = {
+static struct rc_map_list pv951_map = {
 	.map = {
 		.scan    = pv951,
 		.size    = ARRAY_SIZE(pv951),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_PV951,
 	}
 };
 
 static int __init init_rc_map_pv951(void)
 {
-	return ir_register_map(&pv951_map);
+	return rc_map_register(&pv951_map);
 }
 
 static void __exit exit_rc_map_pv951(void)
 {
-	ir_unregister_map(&pv951_map);
+	rc_map_unregister(&pv951_map);
 }
 
 module_init(init_rc_map_pv951)
diff --git a/drivers/media/IR/keymaps/rc-rc5-hauppauge-new.c b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
index cc6b8f54874..dfc9b15f43a 100644
--- a/drivers/media/IR/keymaps/rc-rc5-hauppauge-new.c
+++ b/drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c
@@ -19,7 +19,7 @@
  * This table contains the complete RC5 code, instead of just the data part
  */
 
-static struct ir_scancode rc5_hauppauge_new[] = {
+static struct rc_map_table rc5_hauppauge_new[] = {
 	/* Keys 0 to 9 */
 	{ 0x1e00, KEY_0 },
 	{ 0x1e01, KEY_1 },
@@ -75,25 +75,63 @@ static struct ir_scancode rc5_hauppauge_new[] = {
 	{ 0x1e3b, KEY_SELECT },		/* top right button */
 	{ 0x1e3c, KEY_ZOOM },		/* full */
 	{ 0x1e3d, KEY_POWER },		/* system power (green button) */
+
+	/* Keycodes for DSR-0112 remote bundled with Haupauge MiniStick */
+	{ 0x1d00, KEY_0 },
+	{ 0x1d01, KEY_1 },
+	{ 0x1d02, KEY_2 },
+	{ 0x1d03, KEY_3 },
+	{ 0x1d04, KEY_4 },
+	{ 0x1d05, KEY_5 },
+	{ 0x1d06, KEY_6 },
+	{ 0x1d07, KEY_7 },
+	{ 0x1d08, KEY_8 },
+	{ 0x1d09, KEY_9 },
+	{ 0x1d0a, KEY_TEXT },
+	{ 0x1d0d, KEY_MENU },
+	{ 0x1d0f, KEY_MUTE },
+	{ 0x1d10, KEY_VOLUMEUP },
+	{ 0x1d11, KEY_VOLUMEDOWN },
+	{ 0x1d12, KEY_PREVIOUS },        /* Prev.Ch .. ??? */
+	{ 0x1d14, KEY_UP },
+	{ 0x1d15, KEY_DOWN },
+	{ 0x1d16, KEY_LEFT },
+	{ 0x1d17, KEY_RIGHT },
+	{ 0x1d1c, KEY_TV },
+	{ 0x1d1e, KEY_NEXT },           /* >|             */
+	{ 0x1d1f, KEY_EXIT },
+	{ 0x1d20, KEY_CHANNELUP },
+	{ 0x1d21, KEY_CHANNELDOWN },
+	{ 0x1d24, KEY_LAST },           /* <|             */
+	{ 0x1d25, KEY_OK },
+	{ 0x1d30, KEY_PAUSE },
+	{ 0x1d32, KEY_REWIND },
+	{ 0x1d34, KEY_FASTFORWARD },
+	{ 0x1d35, KEY_PLAY },
+	{ 0x1d36, KEY_STOP },
+	{ 0x1d37, KEY_RECORD },
+	{ 0x1d3b, KEY_GOTO },
+	{ 0x1d3d, KEY_POWER },
+	{ 0x1d3f, KEY_HOME },
 };
 
-static struct rc_keymap rc5_hauppauge_new_map = {
+static struct rc_map_list rc5_hauppauge_new_map = {
 	.map = {
 		.scan    = rc5_hauppauge_new,
 		.size    = ARRAY_SIZE(rc5_hauppauge_new),
-		.ir_type = IR_TYPE_RC5,
+		.rc_type = RC_TYPE_RC5,
 		.name    = RC_MAP_RC5_HAUPPAUGE_NEW,
 	}
 };
 
 static int __init init_rc_map_rc5_hauppauge_new(void)
 {
-	return ir_register_map(&rc5_hauppauge_new_map);
+	return rc_map_register(&rc5_hauppauge_new_map);
 }
 
 static void __exit exit_rc_map_rc5_hauppauge_new(void)
 {
-	ir_unregister_map(&rc5_hauppauge_new_map);
+	rc_map_unregister(&rc5_hauppauge_new_map);
 }
 
 module_init(init_rc_map_rc5_hauppauge_new)
diff --git a/drivers/media/IR/keymaps/rc-rc5-tv.c b/drivers/media/rc/keymaps/rc-rc5-tv.c
index 73cce2f8ddf..4fcef9f1f72 100644
--- a/drivers/media/IR/keymaps/rc-rc5-tv.c
+++ b/drivers/media/rc/keymaps/rc-rc5-tv.c
@@ -16,7 +16,7 @@
 /* see http://users.pandora.be/nenya/electronics/rc5/codes00.htm */
 /* used by old (black) Hauppauge remotes                         */
 
-static struct ir_scancode rc5_tv[] = {
+static struct rc_map_table rc5_tv[] = {
 	/* Keys 0 to 9 */
 	{ 0x00, KEY_0 },
 	{ 0x01, KEY_1 },
@@ -55,23 +55,23 @@ static struct ir_scancode rc5_tv[] = {
 
 };
 
-static struct rc_keymap rc5_tv_map = {
+static struct rc_map_list rc5_tv_map = {
 	.map = {
 		.scan    = rc5_tv,
 		.size    = ARRAY_SIZE(rc5_tv),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_RC5_TV,
 	}
 };
 
 static int __init init_rc_map_rc5_tv(void)
 {
-	return ir_register_map(&rc5_tv_map);
+	return rc_map_register(&rc5_tv_map);
 }
 
 static void __exit exit_rc_map_rc5_tv(void)
 {
-	ir_unregister_map(&rc5_tv_map);
+	rc_map_unregister(&rc5_tv_map);
 }
 
 module_init(init_rc_map_rc5_tv)
diff --git a/drivers/media/IR/keymaps/rc-rc6-mce.c b/drivers/media/rc/keymaps/rc-rc6-mce.c
index 1b7adabbcee..3bf3337875d 100644
--- a/drivers/media/IR/keymaps/rc-rc6-mce.c
+++ b/drivers/media/rc/keymaps/rc-rc6-mce.c
@@ -11,7 +11,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode rc6_mce[] = {
+static struct rc_map_table rc6_mce[] = {
 
 	{ 0x800f0400, KEY_NUMERIC_0 },
 	{ 0x800f0401, KEY_NUMERIC_1 },
@@ -26,8 +26,8 @@ static struct ir_scancode rc6_mce[] = {
 
 	{ 0x800f040a, KEY_DELETE },
 	{ 0x800f040b, KEY_ENTER },
-	{ 0x800f040c, KEY_POWER },
-	{ 0x800f040d, KEY_PROG1 }, 		/* Windows MCE button */
+	{ 0x800f040c, KEY_POWER },		/* PC Power */
+	{ 0x800f040d, KEY_PROG1 },		/* Windows MCE button */
 	{ 0x800f040e, KEY_MUTE },
 	{ 0x800f040f, KEY_INFO },
 
@@ -56,53 +56,54 @@ static struct ir_scancode rc6_mce[] = {
 	{ 0x800f0422, KEY_OK },
 	{ 0x800f0423, KEY_EXIT },
 	{ 0x800f0424, KEY_DVD },
-	{ 0x800f0425, KEY_TUNER }, 		/* LiveTV */
-	{ 0x800f0426, KEY_EPG }, 		/* Guide */
-	{ 0x800f0427, KEY_ZOOM }, 		/* Aspect */
+	{ 0x800f0425, KEY_TUNER },		/* LiveTV */
+	{ 0x800f0426, KEY_EPG },		/* Guide */
+	{ 0x800f0427, KEY_ZOOM },		/* Aspect */
 
 	{ 0x800f043a, KEY_BRIGHTNESSUP },
 
 	{ 0x800f0446, KEY_TV },
-	{ 0x800f0447, KEY_AUDIO }, 		/* My Music */
-	{ 0x800f0448, KEY_PVR }, 		/* RecordedTV */
+	{ 0x800f0447, KEY_AUDIO },		/* My Music */
+	{ 0x800f0448, KEY_PVR },		/* RecordedTV */
 	{ 0x800f0449, KEY_CAMERA },
 	{ 0x800f044a, KEY_VIDEO },
 	{ 0x800f044c, KEY_LANGUAGE },
 	{ 0x800f044d, KEY_TITLE },
-	{ 0x800f044e, KEY_PRINT }, 	/* Print - HP OEM version of remote */
+	{ 0x800f044e, KEY_PRINT },	/* Print - HP OEM version of remote */
 
 	{ 0x800f0450, KEY_RADIO },
 
-	{ 0x800f045a, KEY_SUBTITLE }, 		/* Caption/Teletext */
+	{ 0x800f045a, KEY_SUBTITLE },		/* Caption/Teletext */
 	{ 0x800f045b, KEY_RED },
 	{ 0x800f045c, KEY_GREEN },
 	{ 0x800f045d, KEY_YELLOW },
 	{ 0x800f045e, KEY_BLUE },
 
+	{ 0x800f0465, KEY_POWER2 },	/* TV Power */
 	{ 0x800f046e, KEY_PLAYPAUSE },
-	{ 0x800f046f, KEY_MEDIA }, 	/* Start media application (NEW) */
+	{ 0x800f046f, KEY_MEDIA },	/* Start media application (NEW) */
 
 	{ 0x800f0480, KEY_BRIGHTNESSDOWN },
 	{ 0x800f0481, KEY_PLAYPAUSE },
 };
 
-static struct rc_keymap rc6_mce_map = {
+static struct rc_map_list rc6_mce_map = {
 	.map = {
 		.scan    = rc6_mce,
 		.size    = ARRAY_SIZE(rc6_mce),
-		.ir_type = IR_TYPE_RC6,
+		.rc_type = RC_TYPE_RC6,
 		.name    = RC_MAP_RC6_MCE,
 	}
 };
 
 static int __init init_rc_map_rc6_mce(void)
 {
-	return ir_register_map(&rc6_mce_map);
+	return rc_map_register(&rc6_mce_map);
 }
 
 static void __exit exit_rc_map_rc6_mce(void)
 {
-	ir_unregister_map(&rc6_mce_map);
+	rc_map_unregister(&rc6_mce_map);
 }
 
 module_init(init_rc_map_rc6_mce)
diff --git a/drivers/media/IR/keymaps/rc-real-audio-220-32-keys.c b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
index ab1a6d2baf7..2d14598592d 100644
--- a/drivers/media/IR/keymaps/rc-real-audio-220-32-keys.c
+++ b/drivers/media/rc/keymaps/rc-real-audio-220-32-keys.c
@@ -14,7 +14,7 @@
 
 /* Zogis Real Audio 220 - 32 keys IR */
 
-static struct ir_scancode real_audio_220_32_keys[] = {
+static struct rc_map_table real_audio_220_32_keys[] = {
 	{ 0x1c, KEY_RADIO},
 	{ 0x12, KEY_POWER2},
 
@@ -52,23 +52,23 @@ static struct ir_scancode real_audio_220_32_keys[] = {
 
 };
 
-static struct rc_keymap real_audio_220_32_keys_map = {
+static struct rc_map_list real_audio_220_32_keys_map = {
 	.map = {
 		.scan    = real_audio_220_32_keys,
 		.size    = ARRAY_SIZE(real_audio_220_32_keys),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_REAL_AUDIO_220_32_KEYS,
 	}
 };
 
 static int __init init_rc_map_real_audio_220_32_keys(void)
 {
-	return ir_register_map(&real_audio_220_32_keys_map);
+	return rc_map_register(&real_audio_220_32_keys_map);
 }
 
 static void __exit exit_rc_map_real_audio_220_32_keys(void)
 {
-	ir_unregister_map(&real_audio_220_32_keys_map);
+	rc_map_unregister(&real_audio_220_32_keys_map);
 }
 
 module_init(init_rc_map_real_audio_220_32_keys)
diff --git a/drivers/media/IR/keymaps/rc-streamzap.c b/drivers/media/rc/keymaps/rc-streamzap.c
index df32013a321..92cc10d2f9c 100644
--- a/drivers/media/IR/keymaps/rc-streamzap.c
+++ b/drivers/media/rc/keymaps/rc-streamzap.c
@@ -11,7 +11,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode streamzap[] = {
+static struct rc_map_table streamzap[] = {
 /*
  * The Streamzap remote is almost, but not quite, RC-5, as it has an extra
  * bit in it, which throws the in-kernel RC-5 decoder for a loop. Currently,
@@ -56,23 +56,23 @@ static struct ir_scancode streamzap[] = {
 
 };
 
-static struct rc_keymap streamzap_map = {
+static struct rc_map_list streamzap_map = {
 	.map = {
 		.scan    = streamzap,
 		.size    = ARRAY_SIZE(streamzap),
-		.ir_type = IR_TYPE_RC5_SZ,
+		.rc_type = RC_TYPE_RC5_SZ,
 		.name    = RC_MAP_STREAMZAP,
 	}
 };
 
 static int __init init_rc_map_streamzap(void)
 {
-	return ir_register_map(&streamzap_map);
+	return rc_map_register(&streamzap_map);
 }
 
 static void __exit exit_rc_map_streamzap(void)
 {
-	ir_unregister_map(&streamzap_map);
+	rc_map_unregister(&streamzap_map);
 }
 
 module_init(init_rc_map_streamzap)
diff --git a/drivers/media/rc/keymaps/rc-tbs-nec.c b/drivers/media/rc/keymaps/rc-tbs-nec.c
new file mode 100644
index 00000000000..7242ee66f6e
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-tbs-nec.c
@@ -0,0 +1,75 @@
+/* tbs-nec.h - Keytable for tbs_nec Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table tbs_nec[] = {
+	{ 0x84, KEY_POWER2},		/* power */
+	{ 0x94, KEY_MUTE},		/* mute */
+	{ 0x87, KEY_1},
+	{ 0x86, KEY_2},
+	{ 0x85, KEY_3},
+	{ 0x8b, KEY_4},
+	{ 0x8a, KEY_5},
+	{ 0x89, KEY_6},
+	{ 0x8f, KEY_7},
+	{ 0x8e, KEY_8},
+	{ 0x8d, KEY_9},
+	{ 0x92, KEY_0},
+	{ 0xc0, KEY_10CHANNELSUP},	/* 10+ */
+	{ 0xd0, KEY_10CHANNELSDOWN},	/* 10- */
+	{ 0x96, KEY_CHANNELUP},		/* ch+ */
+	{ 0x91, KEY_CHANNELDOWN},	/* ch- */
+	{ 0x93, KEY_VOLUMEUP},		/* vol+ */
+	{ 0x8c, KEY_VOLUMEDOWN},	/* vol- */
+	{ 0x83, KEY_RECORD},		/* rec */
+	{ 0x98, KEY_PAUSE},		/* pause, yellow */
+	{ 0x99, KEY_OK},		/* ok */
+	{ 0x9a, KEY_CAMERA},		/* snapshot */
+	{ 0x81, KEY_UP},
+	{ 0x90, KEY_LEFT},
+	{ 0x82, KEY_RIGHT},
+	{ 0x88, KEY_DOWN},
+	{ 0x95, KEY_FAVORITES},		/* blue */
+	{ 0x97, KEY_SUBTITLE},		/* green */
+	{ 0x9d, KEY_ZOOM},
+	{ 0x9f, KEY_EXIT},
+	{ 0x9e, KEY_MENU},
+	{ 0x9c, KEY_EPG},
+	{ 0x80, KEY_PREVIOUS},		/* red */
+	{ 0x9b, KEY_MODE},
+};
+
+static struct rc_map_list tbs_nec_map = {
+	.map = {
+		.scan    = tbs_nec,
+		.size    = ARRAY_SIZE(tbs_nec),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TBS_NEC,
+	}
+};
+
+static int __init init_rc_map_tbs_nec(void)
+{
+	return rc_map_register(&tbs_nec_map);
+}
+
+static void __exit exit_rc_map_tbs_nec(void)
+{
+	rc_map_unregister(&tbs_nec_map);
+}
+
+module_init(init_rc_map_tbs_nec)
+module_exit(exit_rc_map_tbs_nec)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-terratec-cinergy-xs.c b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
index 5326a0b444c..bc38e34b9fd 100644
--- a/drivers/media/IR/keymaps/rc-terratec-cinergy-xs.c
+++ b/drivers/media/rc/keymaps/rc-terratec-cinergy-xs.c
@@ -16,7 +16,7 @@
    Devin Heitmueller <dheitmueller@linuxtv.org>
  */
 
-static struct ir_scancode terratec_cinergy_xs[] = {
+static struct rc_map_table terratec_cinergy_xs[] = {
 	{ 0x41, KEY_HOME},
 	{ 0x01, KEY_POWER},
 	{ 0x42, KEY_MENU},
@@ -66,23 +66,23 @@ static struct ir_scancode terratec_cinergy_xs[] = {
 	{ 0x5c, KEY_NEXT},
 };
 
-static struct rc_keymap terratec_cinergy_xs_map = {
+static struct rc_map_list terratec_cinergy_xs_map = {
 	.map = {
 		.scan    = terratec_cinergy_xs,
 		.size    = ARRAY_SIZE(terratec_cinergy_xs),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_TERRATEC_CINERGY_XS,
 	}
 };
 
 static int __init init_rc_map_terratec_cinergy_xs(void)
 {
-	return ir_register_map(&terratec_cinergy_xs_map);
+	return rc_map_register(&terratec_cinergy_xs_map);
 }
 
 static void __exit exit_rc_map_terratec_cinergy_xs(void)
 {
-	ir_unregister_map(&terratec_cinergy_xs_map);
+	rc_map_unregister(&terratec_cinergy_xs_map);
 }
 
 module_init(init_rc_map_terratec_cinergy_xs)
diff --git a/drivers/media/IR/keymaps/rc-terratec-slim.c b/drivers/media/rc/keymaps/rc-terratec-slim.c
index 10dee4c1def..1abafa5fd30 100644
--- a/drivers/media/IR/keymaps/rc-terratec-slim.c
+++ b/drivers/media/rc/keymaps/rc-terratec-slim.c
@@ -22,7 +22,7 @@
 
 /* TerraTec slim remote, 7 rows, 4 columns. */
 /* Uses NEC extended 0x02bd. */
-static struct ir_scancode terratec_slim[] = {
+static struct rc_map_table terratec_slim[] = {
 	{ 0x02bd00, KEY_1 },
 	{ 0x02bd01, KEY_2 },
 	{ 0x02bd02, KEY_3 },
@@ -53,23 +53,23 @@ static struct ir_scancode terratec_slim[] = {
 	{ 0x02bd45, KEY_POWER2 },          /* [red power button] */
 };
 
-static struct rc_keymap terratec_slim_map = {
+static struct rc_map_list terratec_slim_map = {
 	.map = {
 		.scan    = terratec_slim,
 		.size    = ARRAY_SIZE(terratec_slim),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_TERRATEC_SLIM,
 	}
 };
 
 static int __init init_rc_map_terratec_slim(void)
 {
-	return ir_register_map(&terratec_slim_map);
+	return rc_map_register(&terratec_slim_map);
 }
 
 static void __exit exit_rc_map_terratec_slim(void)
 {
-	ir_unregister_map(&terratec_slim_map);
+	rc_map_unregister(&terratec_slim_map);
 }
 
 module_init(init_rc_map_terratec_slim)
diff --git a/drivers/media/IR/keymaps/rc-tevii-nec.c b/drivers/media/rc/keymaps/rc-tevii-nec.c
index e30d411c07b..ef5ba3f3273 100644
--- a/drivers/media/IR/keymaps/rc-tevii-nec.c
+++ b/drivers/media/rc/keymaps/rc-tevii-nec.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode tevii_nec[] = {
+static struct rc_map_table tevii_nec[] = {
 	{ 0x0a, KEY_POWER2},
 	{ 0x0c, KEY_MUTE},
 	{ 0x11, KEY_1},
@@ -62,23 +62,23 @@ static struct ir_scancode tevii_nec[] = {
 	{ 0x58, KEY_SWITCHVIDEOMODE},
 };
 
-static struct rc_keymap tevii_nec_map = {
+static struct rc_map_list tevii_nec_map = {
 	.map = {
 		.scan    = tevii_nec,
 		.size    = ARRAY_SIZE(tevii_nec),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_TEVII_NEC,
 	}
 };
 
 static int __init init_rc_map_tevii_nec(void)
 {
-	return ir_register_map(&tevii_nec_map);
+	return rc_map_register(&tevii_nec_map);
 }
 
 static void __exit exit_rc_map_tevii_nec(void)
 {
-	ir_unregister_map(&tevii_nec_map);
+	rc_map_unregister(&tevii_nec_map);
 }
 
 module_init(init_rc_map_tevii_nec)
diff --git a/drivers/media/IR/keymaps/rc-total-media-in-hand.c b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
index fd198576378..20ac4e19fb3 100644
--- a/drivers/media/IR/keymaps/rc-total-media-in-hand.c
+++ b/drivers/media/rc/keymaps/rc-total-media-in-hand.c
@@ -21,7 +21,7 @@
 #include <media/rc-map.h>
 
 /* Uses NEC extended 0x02bd */
-static struct ir_scancode total_media_in_hand[] = {
+static struct rc_map_table total_media_in_hand[] = {
 	{ 0x02bd00, KEY_1 },
 	{ 0x02bd01, KEY_2 },
 	{ 0x02bd02, KEY_3 },
@@ -59,23 +59,23 @@ static struct ir_scancode total_media_in_hand[] = {
 	{ 0x02bd45, KEY_INFO },            /* [red (I)] */
 };
 
-static struct rc_keymap total_media_in_hand_map = {
+static struct rc_map_list total_media_in_hand_map = {
 	.map = {
 		.scan    = total_media_in_hand,
 		.size    = ARRAY_SIZE(total_media_in_hand),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_TOTAL_MEDIA_IN_HAND,
 	}
 };
 
 static int __init init_rc_map_total_media_in_hand(void)
 {
-	return ir_register_map(&total_media_in_hand_map);
+	return rc_map_register(&total_media_in_hand_map);
 }
 
 static void __exit exit_rc_map_total_media_in_hand(void)
 {
-	ir_unregister_map(&total_media_in_hand_map);
+	rc_map_unregister(&total_media_in_hand_map);
 }
 
 module_init(init_rc_map_total_media_in_hand)
diff --git a/drivers/media/IR/keymaps/rc-trekstor.c b/drivers/media/rc/keymaps/rc-trekstor.c
index 91092caca45..f8190ead2e3 100644
--- a/drivers/media/IR/keymaps/rc-trekstor.c
+++ b/drivers/media/rc/keymaps/rc-trekstor.c
@@ -23,7 +23,7 @@
 /* TrekStor DVB-T USB Stick remote controller. */
 /* Imported from af9015.h.
    Initial keytable was from Marc Schneider <macke@macke.org> */
-static struct ir_scancode trekstor[] = {
+static struct rc_map_table trekstor[] = {
 	{ 0x0084, KEY_0 },
 	{ 0x0085, KEY_MUTE },            /* Mute */
 	{ 0x0086, KEY_HOMEPAGE },        /* Home */
@@ -54,23 +54,23 @@ static struct ir_scancode trekstor[] = {
 	{ 0x009f, KEY_LEFT },            /* Left */
 };
 
-static struct rc_keymap trekstor_map = {
+static struct rc_map_list trekstor_map = {
 	.map = {
 		.scan    = trekstor,
 		.size    = ARRAY_SIZE(trekstor),
-		.ir_type = IR_TYPE_NEC,
+		.rc_type = RC_TYPE_NEC,
 		.name    = RC_MAP_TREKSTOR,
 	}
 };
 
 static int __init init_rc_map_trekstor(void)
 {
-	return ir_register_map(&trekstor_map);
+	return rc_map_register(&trekstor_map);
 }
 
 static void __exit exit_rc_map_trekstor(void)
 {
-	ir_unregister_map(&trekstor_map);
+	rc_map_unregister(&trekstor_map);
 }
 
 module_init(init_rc_map_trekstor)
diff --git a/drivers/media/rc/keymaps/rc-tt-1500.c b/drivers/media/rc/keymaps/rc-tt-1500.c
new file mode 100644
index 00000000000..295f3738e30
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-tt-1500.c
@@ -0,0 +1,82 @@
+/* tt-1500.h - Keytable for tt_1500 Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+/* for the Technotrend 1500 bundled remotes (grey and black): */
+
+static struct rc_map_table tt_1500[] = {
+	{ 0x1501, KEY_POWER },
+	{ 0x1502, KEY_SHUFFLE },		/* ? double-arrow key */
+	{ 0x1503, KEY_1 },
+	{ 0x1504, KEY_2 },
+	{ 0x1505, KEY_3 },
+	{ 0x1506, KEY_4 },
+	{ 0x1507, KEY_5 },
+	{ 0x1508, KEY_6 },
+	{ 0x1509, KEY_7 },
+	{ 0x150a, KEY_8 },
+	{ 0x150b, KEY_9 },
+	{ 0x150c, KEY_0 },
+	{ 0x150d, KEY_UP },
+	{ 0x150e, KEY_LEFT },
+	{ 0x150f, KEY_OK },
+	{ 0x1510, KEY_RIGHT },
+	{ 0x1511, KEY_DOWN },
+	{ 0x1512, KEY_INFO },
+	{ 0x1513, KEY_EXIT },
+	{ 0x1514, KEY_RED },
+	{ 0x1515, KEY_GREEN },
+	{ 0x1516, KEY_YELLOW },
+	{ 0x1517, KEY_BLUE },
+	{ 0x1518, KEY_MUTE },
+	{ 0x1519, KEY_TEXT },
+	{ 0x151a, KEY_MODE },		/* ? TV/Radio */
+	{ 0x1521, KEY_OPTION },
+	{ 0x1522, KEY_EPG },
+	{ 0x1523, KEY_CHANNELUP },
+	{ 0x1524, KEY_CHANNELDOWN },
+	{ 0x1525, KEY_VOLUMEUP },
+	{ 0x1526, KEY_VOLUMEDOWN },
+	{ 0x1527, KEY_SETUP },
+	{ 0x153a, KEY_RECORD },		/* these keys are only in the black remote */
+	{ 0x153b, KEY_PLAY },
+	{ 0x153c, KEY_STOP },
+	{ 0x153d, KEY_REWIND },
+	{ 0x153e, KEY_PAUSE },
+	{ 0x153f, KEY_FORWARD },
+};
+
+static struct rc_map_list tt_1500_map = {
+	.map = {
+		.scan    = tt_1500,
+		.size    = ARRAY_SIZE(tt_1500),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_TT_1500,
+	}
+};
+
+static int __init init_rc_map_tt_1500(void)
+{
+	return rc_map_register(&tt_1500_map);
+}
+
+static void __exit exit_rc_map_tt_1500(void)
+{
+	rc_map_unregister(&tt_1500_map);
+}
+
+module_init(init_rc_map_tt_1500)
+module_exit(exit_rc_map_tt_1500)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
diff --git a/drivers/media/IR/keymaps/rc-twinhan1027.c b/drivers/media/rc/keymaps/rc-twinhan1027.c
index 0b5d356c2d8..8bf8df64b08 100644
--- a/drivers/media/IR/keymaps/rc-twinhan1027.c
+++ b/drivers/media/rc/keymaps/rc-twinhan1027.c
@@ -1,6 +1,6 @@
 #include <media/rc-map.h>
 
-static struct ir_scancode twinhan_vp1027[] = {
+static struct rc_map_table twinhan_vp1027[] = {
 	{ 0x16, KEY_POWER2 },
 	{ 0x17, KEY_FAVORITES },
 	{ 0x0f, KEY_TEXT },
@@ -61,23 +61,23 @@ static struct ir_scancode twinhan_vp1027[] = {
 	{ 0x5f, KEY_BLUE },
 };
 
-static struct rc_keymap twinhan_vp1027_map = {
+static struct rc_map_list twinhan_vp1027_map = {
 	.map = {
 		.scan    = twinhan_vp1027,
 		.size    = ARRAY_SIZE(twinhan_vp1027),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_TWINHAN_VP1027_DVBS,
 	}
 };
 
 static int __init init_rc_map_twinhan_vp1027(void)
 {
-	return ir_register_map(&twinhan_vp1027_map);
+	return rc_map_register(&twinhan_vp1027_map);
 }
 
 static void __exit exit_rc_map_twinhan_vp1027(void)
 {
-	ir_unregister_map(&twinhan_vp1027_map);
+	rc_map_unregister(&twinhan_vp1027_map);
 }
 
 module_init(init_rc_map_twinhan_vp1027)
diff --git a/drivers/media/rc/keymaps/rc-videomate-m1f.c b/drivers/media/rc/keymaps/rc-videomate-m1f.c
new file mode 100644
index 00000000000..4994d405c0a
--- /dev/null
+++ b/drivers/media/rc/keymaps/rc-videomate-m1f.c
@@ -0,0 +1,92 @@
+/* videomate-m1f.h - Keytable for videomate_m1f Remote Controller
+ *
+ * keymap imported from ir-keymaps.c
+ *
+ * Copyright (c) 2010 by Pavel Osnova <pvosnova@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <media/rc-map.h>
+
+static struct rc_map_table videomate_m1f[] = {
+	{ 0x01, KEY_POWER },
+	{ 0x31, KEY_TUNER },
+	{ 0x33, KEY_VIDEO },
+	{ 0x2f, KEY_RADIO },
+	{ 0x30, KEY_CAMERA },
+	{ 0x2d, KEY_NEW }, /* TV record button */
+	{ 0x17, KEY_CYCLEWINDOWS },
+	{ 0x2c, KEY_ANGLE },
+	{ 0x2b, KEY_LANGUAGE },
+	{ 0x32, KEY_SEARCH }, /* '...' button */
+	{ 0x11, KEY_UP },
+	{ 0x13, KEY_LEFT },
+	{ 0x15, KEY_OK },
+	{ 0x14, KEY_RIGHT },
+	{ 0x12, KEY_DOWN },
+	{ 0x16, KEY_BACKSPACE },
+	{ 0x02, KEY_ZOOM }, /* WIN key */
+	{ 0x04, KEY_INFO },
+	{ 0x05, KEY_VOLUMEUP },
+	{ 0x03, KEY_MUTE },
+	{ 0x07, KEY_CHANNELUP },
+	{ 0x06, KEY_VOLUMEDOWN },
+	{ 0x08, KEY_CHANNELDOWN },
+	{ 0x0c, KEY_RECORD },
+	{ 0x0e, KEY_STOP },
+	{ 0x0a, KEY_BACK },
+	{ 0x0b, KEY_PLAY },
+	{ 0x09, KEY_FORWARD },
+	{ 0x10, KEY_PREVIOUS },
+	{ 0x0d, KEY_PAUSE },
+	{ 0x0f, KEY_NEXT },
+	{ 0x1e, KEY_1 },
+	{ 0x1f, KEY_2 },
+	{ 0x20, KEY_3 },
+	{ 0x21, KEY_4 },
+	{ 0x22, KEY_5 },
+	{ 0x23, KEY_6 },
+	{ 0x24, KEY_7 },
+	{ 0x25, KEY_8 },
+	{ 0x26, KEY_9 },
+	{ 0x2a, KEY_NUMERIC_STAR }, /* * key */
+	{ 0x1d, KEY_0 },
+	{ 0x29, KEY_SUBTITLE }, /* # key */
+	{ 0x27, KEY_CLEAR },
+	{ 0x34, KEY_SCREEN },
+	{ 0x28, KEY_ENTER },
+	{ 0x19, KEY_RED },
+	{ 0x1a, KEY_GREEN },
+	{ 0x1b, KEY_YELLOW },
+	{ 0x1c, KEY_BLUE },
+	{ 0x18, KEY_TEXT },
+};
+
+static struct rc_map_list videomate_m1f_map = {
+	.map = {
+		.scan    = videomate_m1f,
+		.size    = ARRAY_SIZE(videomate_m1f),
+		.rc_type = RC_TYPE_UNKNOWN,     /* Legacy IR type */
+		.name    = RC_MAP_VIDEOMATE_M1F,
+	}
+};
+
+static int __init init_rc_map_videomate_m1f(void)
+{
+	return rc_map_register(&videomate_m1f_map);
+}
+
+static void __exit exit_rc_map_videomate_m1f(void)
+{
+	rc_map_unregister(&videomate_m1f_map);
+}
+
+module_init(init_rc_map_videomate_m1f)
+module_exit(exit_rc_map_videomate_m1f)
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Pavel Osnova <pvosnova@gmail.com>");
diff --git a/drivers/media/IR/keymaps/rc-videomate-s350.c b/drivers/media/rc/keymaps/rc-videomate-s350.c
index 4df7fcd1d2f..9e474a6024e 100644
--- a/drivers/media/IR/keymaps/rc-videomate-s350.c
+++ b/drivers/media/rc/keymaps/rc-videomate-s350.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode videomate_s350[] = {
+static struct rc_map_table videomate_s350[] = {
 	{ 0x00, KEY_TV},
 	{ 0x01, KEY_DVD},
 	{ 0x04, KEY_RECORD},
@@ -59,23 +59,23 @@ static struct ir_scancode videomate_s350[] = {
 	{ 0x20, KEY_TEXT},
 };
 
-static struct rc_keymap videomate_s350_map = {
+static struct rc_map_list videomate_s350_map = {
 	.map = {
 		.scan    = videomate_s350,
 		.size    = ARRAY_SIZE(videomate_s350),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_VIDEOMATE_S350,
 	}
 };
 
 static int __init init_rc_map_videomate_s350(void)
 {
-	return ir_register_map(&videomate_s350_map);
+	return rc_map_register(&videomate_s350_map);
 }
 
 static void __exit exit_rc_map_videomate_s350(void)
 {
-	ir_unregister_map(&videomate_s350_map);
+	rc_map_unregister(&videomate_s350_map);
 }
 
 module_init(init_rc_map_videomate_s350)
diff --git a/drivers/media/IR/keymaps/rc-videomate-tv-pvr.c b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
index 776b0a638d8..5f2a46e1f8f 100644
--- a/drivers/media/IR/keymaps/rc-videomate-tv-pvr.c
+++ b/drivers/media/rc/keymaps/rc-videomate-tv-pvr.c
@@ -12,7 +12,7 @@
 
 #include <media/rc-map.h>
 
-static struct ir_scancode videomate_tv_pvr[] = {
+static struct rc_map_table videomate_tv_pvr[] = {
 	{ 0x14, KEY_MUTE },
 	{ 0x24, KEY_ZOOM },
 
@@ -61,23 +61,23 @@ static struct ir_scancode videomate_tv_pvr[] = {
 	{ 0x21, KEY_SLEEP },
 };
 
-static struct rc_keymap videomate_tv_pvr_map = {
+static struct rc_map_list videomate_tv_pvr_map = {
 	.map = {
 		.scan    = videomate_tv_pvr,
 		.size    = ARRAY_SIZE(videomate_tv_pvr),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_VIDEOMATE_TV_PVR,
 	}
 };
 
 static int __init init_rc_map_videomate_tv_pvr(void)
 {
-	return ir_register_map(&videomate_tv_pvr_map);
+	return rc_map_register(&videomate_tv_pvr_map);
 }
 
 static void __exit exit_rc_map_videomate_tv_pvr(void)
 {
-	ir_unregister_map(&videomate_tv_pvr_map);
+	rc_map_unregister(&videomate_tv_pvr_map);
 }
 
 module_init(init_rc_map_videomate_tv_pvr)
diff --git a/drivers/media/IR/keymaps/rc-winfast-usbii-deluxe.c b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
index 9d2d550aaa9..bd8d021f40a 100644
--- a/drivers/media/IR/keymaps/rc-winfast-usbii-deluxe.c
+++ b/drivers/media/rc/keymaps/rc-winfast-usbii-deluxe.c
@@ -16,7 +16,7 @@
    Magnus Alm <magnus.alm@gmail.com>
  */
 
-static struct ir_scancode winfast_usbii_deluxe[] = {
+static struct rc_map_table winfast_usbii_deluxe[] = {
 	{ 0x62, KEY_0},
 	{ 0x75, KEY_1},
 	{ 0x76, KEY_2},
@@ -56,23 +56,23 @@ static struct ir_scancode winfast_usbii_deluxe[] = {
 
 };
 
-static struct rc_keymap winfast_usbii_deluxe_map = {
+static struct rc_map_list winfast_usbii_deluxe_map = {
 	.map = {
 		.scan    = winfast_usbii_deluxe,
 		.size    = ARRAY_SIZE(winfast_usbii_deluxe),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_WINFAST_USBII_DELUXE,
 	}
 };
 
 static int __init init_rc_map_winfast_usbii_deluxe(void)
 {
-	return ir_register_map(&winfast_usbii_deluxe_map);
+	return rc_map_register(&winfast_usbii_deluxe_map);
 }
 
 static void __exit exit_rc_map_winfast_usbii_deluxe(void)
 {
-	ir_unregister_map(&winfast_usbii_deluxe_map);
+	rc_map_unregister(&winfast_usbii_deluxe_map);
 }
 
 module_init(init_rc_map_winfast_usbii_deluxe)
diff --git a/drivers/media/IR/keymaps/rc-winfast.c b/drivers/media/rc/keymaps/rc-winfast.c
index 0e90a3bd949..2747db43b70 100644
--- a/drivers/media/IR/keymaps/rc-winfast.c
+++ b/drivers/media/rc/keymaps/rc-winfast.c
@@ -14,7 +14,7 @@
 
 /* Table for Leadtek Winfast Remote Controls - used by both bttv and cx88 */
 
-static struct ir_scancode winfast[] = {
+static struct rc_map_table winfast[] = {
 	/* Keys 0 to 9 */
 	{ 0x12, KEY_0 },
 	{ 0x05, KEY_1 },
@@ -76,23 +76,23 @@ static struct ir_scancode winfast[] = {
 	{ 0x3f, KEY_F24 }		/* MCE -CH,  on Y04G0033 */
 };
 
-static struct rc_keymap winfast_map = {
+static struct rc_map_list winfast_map = {
 	.map = {
 		.scan    = winfast,
 		.size    = ARRAY_SIZE(winfast),
-		.ir_type = IR_TYPE_UNKNOWN,	/* Legacy IR type */
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
 		.name    = RC_MAP_WINFAST,
 	}
 };
 
 static int __init init_rc_map_winfast(void)
 {
-	return ir_register_map(&winfast_map);
+	return rc_map_register(&winfast_map);
 }
 
 static void __exit exit_rc_map_winfast(void)
 {
-	ir_unregister_map(&winfast_map);
+	rc_map_unregister(&winfast_map);
 }
 
 module_init(init_rc_map_winfast)
diff --git a/drivers/media/IR/lirc_dev.c b/drivers/media/rc/lirc_dev.c
index 8418b14ee4d..fd237ab120b 100644
--- a/drivers/media/IR/lirc_dev.c
+++ b/drivers/media/rc/lirc_dev.c
@@ -178,7 +178,9 @@ static int lirc_cdev_add(struct irctl *ir)
 		cdev_init(cdev, &lirc_dev_fops);
 		cdev->owner = THIS_MODULE;
 	}
-	kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
+	retval = kobject_set_name(&cdev->kobj, "lirc%d", d->minor);
+	if (retval)
+		return retval;
 
 	retval = cdev_add(cdev, MKDEV(MAJOR(lirc_base_dev), d->minor), 1);
 	if (retval)
@@ -522,10 +524,8 @@ unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait)
 
 	dev_dbg(ir->d.dev, LOGHEAD "poll called\n", ir->d.name, ir->d.minor);
 
-	if (!ir->attached) {
-		mutex_unlock(&ir->irctl_lock);
+	if (!ir->attached)
 		return POLLERR;
-	}
 
 	poll_wait(file, &ir->buf->wait_poll, wait);
 
@@ -629,7 +629,7 @@ long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 EXPORT_SYMBOL(lirc_dev_fop_ioctl);
 
 ssize_t lirc_dev_fop_read(struct file *file,
-			  char *buffer,
+			  char __user *buffer,
 			  size_t length,
 			  loff_t *ppos)
 {
@@ -649,18 +649,18 @@ ssize_t lirc_dev_fop_read(struct file *file,
 	if (!buf)
 		return -ENOMEM;
 
-	if (mutex_lock_interruptible(&ir->irctl_lock))
-		return -ERESTARTSYS;
+	if (mutex_lock_interruptible(&ir->irctl_lock)) {
+		ret = -ERESTARTSYS;
+		goto out_unlocked;
+	}
 	if (!ir->attached) {
-		mutex_unlock(&ir->irctl_lock);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto out_locked;
 	}
 
 	if (length % ir->chunk_size) {
-		dev_dbg(ir->d.dev, LOGHEAD "read result = -EINVAL\n",
-			ir->d.name, ir->d.minor);
-		mutex_unlock(&ir->irctl_lock);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out_locked;
 	}
 
 	/*
@@ -711,18 +711,23 @@ ssize_t lirc_dev_fop_read(struct file *file,
 			lirc_buffer_read(ir->buf, buf);
 			ret = copy_to_user((void *)buffer+written, buf,
 					   ir->buf->chunk_size);
-			written += ir->buf->chunk_size;
+			if (!ret)
+				written += ir->buf->chunk_size;
+			else
+				ret = -EFAULT;
 		}
 	}
 
 	remove_wait_queue(&ir->buf->wait_poll, &wait);
 	set_current_state(TASK_RUNNING);
+
+out_locked:
 	mutex_unlock(&ir->irctl_lock);
 
 out_unlocked:
 	kfree(buf);
 	dev_dbg(ir->d.dev, LOGHEAD "read result = %s (%d)\n",
-		ir->d.name, ir->d.minor, ret ? "-EFAULT" : "OK", ret);
+		ir->d.name, ir->d.minor, ret ? "<fail>" : "<ok>", ret);
 
 	return ret ? ret : written;
 }
@@ -744,7 +749,7 @@ void *lirc_get_pdata(struct file *file)
 EXPORT_SYMBOL(lirc_get_pdata);
 
 
-ssize_t lirc_dev_fop_write(struct file *file, const char *buffer,
+ssize_t lirc_dev_fop_write(struct file *file, const char __user *buffer,
 			   size_t length, loff_t *ppos)
 {
 	struct irctl *ir = irctls[iminor(file->f_dentry->d_inode)];
diff --git a/drivers/media/IR/mceusb.c b/drivers/media/rc/mceusb.c
index 9dce684fd23..0fef6efad53 100644
--- a/drivers/media/IR/mceusb.c
+++ b/drivers/media/rc/mceusb.c
@@ -36,9 +36,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
-#include <linux/input.h>
-#include <media/ir-core.h>
-#include <media/ir-common.h>
+#include <linux/usb/input.h>
+#include <media/rc-core.h>
 
 #define DRIVER_VERSION	"1.91"
 #define DRIVER_AUTHOR	"Jarod Wilson <jarod@wilsonet.com>"
@@ -49,6 +48,7 @@
 #define USB_BUFLEN		32 /* USB reception buffer length */
 #define USB_CTRL_MSG_SZ		2  /* Size of usb ctrl msg on gen1 hw */
 #define MCE_G1_INIT_MSGS	40 /* Init messages on gen1 hw to throw out */
+#define MS_TO_NS(msec)		((msec) * 1000)
 
 /* MCE constants */
 #define MCE_CMDBUF_SIZE		384  /* MCE Command buffer length */
@@ -74,6 +74,7 @@
 #define MCE_PACKET_LENGTH_MASK	0x1f /* Packet length mask */
 
 /* Sub-commands, which follow MCE_COMMAND_HEADER or MCE_HW_CMD_HEADER */
+#define MCE_CMD_SIG_END		0x01	/* End of signal */
 #define MCE_CMD_PING		0x03	/* Ping device */
 #define MCE_CMD_UNKNOWN		0x04	/* Unknown */
 #define MCE_CMD_UNKNOWN2	0x05	/* Unknown */
@@ -91,6 +92,7 @@
 #define MCE_CMD_G_TXMASK	0x13	/* Set TX port bitmask */
 #define MCE_CMD_S_RXSENSOR	0x14	/* Set RX sensor (std/learning) */
 #define MCE_CMD_G_RXSENSOR	0x15	/* Get RX sensor (std/learning) */
+#define MCE_RSP_PULSE_COUNT	0x15	/* RX pulse count (only if learning) */
 #define MCE_CMD_TX_PORTS	0x16	/* Get number of TX ports */
 #define MCE_CMD_G_WAKESRC	0x17	/* Get wake source */
 #define MCE_CMD_UNKNOWN7	0x18	/* Unknown */
@@ -146,14 +148,16 @@ enum mceusb_model_type {
 	MCE_GEN3,
 	MCE_GEN2_TX_INV,
 	POLARIS_EVK,
+	CX_HYBRID_TV,
 };
 
 struct mceusb_model {
 	u32 mce_gen1:1;
 	u32 mce_gen2:1;
 	u32 mce_gen3:1;
-	u32 tx_mask_inverted:1;
+	u32 tx_mask_normal:1;
 	u32 is_polaris:1;
+	u32 no_tx:1;
 
 	const char *rc_map;	/* Allow specify a per-board map */
 	const char *name;	/* per-board name */
@@ -162,18 +166,18 @@ struct mceusb_model {
 static const struct mceusb_model mceusb_model[] = {
 	[MCE_GEN1] = {
 		.mce_gen1 = 1,
-		.tx_mask_inverted = 1,
+		.tx_mask_normal = 1,
 	},
 	[MCE_GEN2] = {
 		.mce_gen2 = 1,
 	},
 	[MCE_GEN2_TX_INV] = {
 		.mce_gen2 = 1,
-		.tx_mask_inverted = 1,
+		.tx_mask_normal = 1,
 	},
 	[MCE_GEN3] = {
 		.mce_gen3 = 1,
-		.tx_mask_inverted = 1,
+		.tx_mask_normal = 1,
 	},
 	[POLARIS_EVK] = {
 		.is_polaris = 1,
@@ -183,7 +187,12 @@ static const struct mceusb_model mceusb_model[] = {
 		 * to allow testing it
 		 */
 		.rc_map = RC_MAP_RC5_HAUPPAUGE_NEW,
-		.name = "cx231xx MCE IR",
+		.name = "Conexant Hybrid TV (cx231xx) MCE IR",
+	},
+	[CX_HYBRID_TV] = {
+		.is_polaris = 1,
+		.no_tx = 1, /* tx isn't wired up at all */
+		.name = "Conexant Hybrid TV (cx231xx) MCE IR",
 	},
 };
 
@@ -273,6 +282,8 @@ static struct usb_device_id mceusb_dev_table[] = {
 	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03c) },
 	/* Formosa Industrial Computing */
 	{ USB_DEVICE(VENDOR_FORMOSA, 0xe03e) },
+	/* Fintek eHome Infrared Transceiver (HP branded) */
+	{ USB_DEVICE(VENDOR_FINTEK, 0x5168) },
 	/* Fintek eHome Infrared Transceiver */
 	{ USB_DEVICE(VENDOR_FINTEK, 0x0602) },
 	/* Fintek eHome Infrared Transceiver (in the AOpen MP45) */
@@ -292,9 +303,12 @@ static struct usb_device_id mceusb_dev_table[] = {
 	{ USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) },
 	/* TiVo PC IR Receiver */
 	{ USB_DEVICE(VENDOR_TIVO, 0x2000) },
-	/* Conexant SDK */
+	/* Conexant Hybrid TV "Shelby" Polaris SDK */
 	{ USB_DEVICE(VENDOR_CONEXANT, 0x58a1),
 	  .driver_info = POLARIS_EVK },
+	/* Conexant Hybrid TV RDU253S Polaris */
+	{ USB_DEVICE(VENDOR_CONEXANT, 0x58a5),
+	  .driver_info = CX_HYBRID_TV },
 	/* Terminating entry */
 	{ }
 };
@@ -302,12 +316,14 @@ static struct usb_device_id mceusb_dev_table[] = {
 /* data structure for each usb transceiver */
 struct mceusb_dev {
 	/* ir-core bits */
-	struct ir_dev_props *props;
-	struct ir_raw_event rawir;
+	struct rc_dev *rc;
+
+	/* optional features we can enable */
+	bool carrier_report_enabled;
+	bool learning_enabled;
 
 	/* core device bits */
 	struct device *dev;
-	struct input_dev *idev;
 
 	/* usb */
 	struct usb_device *usbdev;
@@ -318,6 +334,8 @@ struct mceusb_dev {
 	/* buffers and dma */
 	unsigned char *buf_in;
 	unsigned int len_in;
+	dma_addr_t dma_in;
+	dma_addr_t dma_out;
 
 	enum {
 		CMD_HEADER = 0,
@@ -325,15 +343,14 @@ struct mceusb_dev {
 		CMD_DATA,
 		PARSE_IRDATA,
 	} parser_state;
-	u8 cmd, rem;		/* Remaining IR data bytes in packet */
 
-	dma_addr_t dma_in;
-	dma_addr_t dma_out;
+	u8 cmd, rem;		/* Remaining IR data bytes in packet */
 
 	struct {
 		u32 connected:1;
-		u32 tx_mask_inverted:1;
+		u32 tx_mask_normal:1;
 		u32 microsoft_gen1:1;
+		u32 no_tx:1;
 	} flags;
 
 	/* transmit support */
@@ -408,9 +425,10 @@ static int mceusb_cmdsize(u8 cmd, u8 subcmd)
 		case MCE_CMD_UNKNOWN:
 		case MCE_CMD_S_CARRIER:
 		case MCE_CMD_S_TIMEOUT:
-		case MCE_CMD_G_RXSENSOR:
+		case MCE_RSP_PULSE_COUNT:
 			datasize = 2;
 			break;
+		case MCE_CMD_SIG_END:
 		case MCE_CMD_S_TXMASK:
 		case MCE_CMD_S_RXSENSOR:
 			datasize = 1;
@@ -433,7 +451,7 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
 		return;
 
 	/* skip meaningless 0xb1 0x60 header bytes on orig receiver */
-	if (ir->flags.microsoft_gen1 && !out)
+	if (ir->flags.microsoft_gen1 && !out && !offset)
 		skip = 2;
 
 	if (len <= skip)
@@ -491,6 +509,9 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
 		break;
 	case MCE_COMMAND_HEADER:
 		switch (subcmd) {
+		case MCE_CMD_SIG_END:
+			dev_info(dev, "End of signal\n");
+			break;
 		case MCE_CMD_PING:
 			dev_info(dev, "Ping\n");
 			break;
@@ -525,10 +546,11 @@ static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf,
 				 inout, data1 == 0x02 ? "short" : "long");
 			break;
 		case MCE_CMD_G_RXSENSOR:
-			if (len == 2)
+		/* aka MCE_RSP_PULSE_COUNT */
+			if (out)
 				dev_info(dev, "Get receive sensor\n");
-			else
-				dev_info(dev, "Received pulse count is %d\n",
+			else if (ir->learning_enabled)
+				dev_info(dev, "RX pulse count: %d\n",
 					 ((data1 << 8) | data2));
 			break;
 		case MCE_RSP_CMD_INVALID:
@@ -639,9 +661,9 @@ static void mce_sync_in(struct mceusb_dev *ir, unsigned char *data, int size)
 }
 
 /* Send data out the IR blaster port(s) */
-static int mceusb_tx_ir(void *priv, int *txbuf, u32 n)
+static int mceusb_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
 {
-	struct mceusb_dev *ir = priv;
+	struct mceusb_dev *ir = dev->priv;
 	int i, ret = 0;
 	int count, cmdcount = 0;
 	unsigned char *cmdbuf; /* MCE command buffer */
@@ -724,24 +746,24 @@ out:
 	return ret ? ret : n;
 }
 
-/* Sets active IR outputs -- mce devices typically (all?) have two */
-static int mceusb_set_tx_mask(void *priv, u32 mask)
+/* Sets active IR outputs -- mce devices typically have two */
+static int mceusb_set_tx_mask(struct rc_dev *dev, u32 mask)
 {
-	struct mceusb_dev *ir = priv;
+	struct mceusb_dev *ir = dev->priv;
 
-	if (ir->flags.tx_mask_inverted)
+	if (ir->flags.tx_mask_normal)
+		ir->tx_mask = mask;
+	else
 		ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ?
 				mask ^ MCE_DEFAULT_TX_MASK : mask) << 1;
-	else
-		ir->tx_mask = mask;
 
 	return 0;
 }
 
 /* Sets the send carrier frequency and mode */
-static int mceusb_set_tx_carrier(void *priv, u32 carrier)
+static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 {
-	struct mceusb_dev *ir = priv;
+	struct mceusb_dev *ir = dev->priv;
 	int clk = 10000000;
 	int prescaler = 0, divisor = 0;
 	unsigned char cmdbuf[4] = { MCE_COMMAND_HEADER,
@@ -752,7 +774,7 @@ static int mceusb_set_tx_carrier(void *priv, u32 carrier)
 
 		if (carrier == 0) {
 			ir->carrier = carrier;
-			cmdbuf[2] = 0x01;
+			cmdbuf[2] = MCE_CMD_SIG_END;
 			cmdbuf[3] = MCE_IRDATA_TRAILER;
 			dev_dbg(ir->dev, "%s: disabling carrier "
 				"modulation\n", __func__);
@@ -782,6 +804,34 @@ static int mceusb_set_tx_carrier(void *priv, u32 carrier)
 	return carrier;
 }
 
+/*
+ * We don't do anything but print debug spew for many of the command bits
+ * we receive from the hardware, but some of them are useful information
+ * we want to store so that we can use them.
+ */
+static void mceusb_handle_command(struct mceusb_dev *ir, int index)
+{
+	u8 hi = ir->buf_in[index + 1] & 0xff;
+	u8 lo = ir->buf_in[index + 2] & 0xff;
+
+	switch (ir->buf_in[index]) {
+	/* 2-byte return value commands */
+	case MCE_CMD_S_TIMEOUT:
+		ir->rc->timeout = MS_TO_NS((hi << 8 | lo) / 2);
+		break;
+
+	/* 1-byte return value commands */
+	case MCE_CMD_S_TXMASK:
+		ir->tx_mask = hi;
+		break;
+	case MCE_CMD_S_RXSENSOR:
+		ir->learning_enabled = (hi == 0x02);
+		break;
+	default:
+		break;
+	}
+}
+
 static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 {
 	DEFINE_IR_RAW_EVENT(rawir);
@@ -791,39 +841,30 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 	if (ir->flags.microsoft_gen1)
 		i = 2;
 
+	/* if there's no data, just return now */
+	if (buf_len <= i)
+		return;
+
 	for (; i < buf_len; i++) {
 		switch (ir->parser_state) {
 		case SUBCMD:
 			ir->rem = mceusb_cmdsize(ir->cmd, ir->buf_in[i]);
 			mceusb_dev_printdata(ir, ir->buf_in, i - 1,
 					     ir->rem + 2, false);
+			mceusb_handle_command(ir, i);
 			ir->parser_state = CMD_DATA;
 			break;
 		case PARSE_IRDATA:
 			ir->rem--;
 			rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0);
 			rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK)
-					 * MCE_TIME_UNIT * 1000;
-
-			if ((ir->buf_in[i] & MCE_PULSE_MASK) == 0x7f) {
-				if (ir->rawir.pulse == rawir.pulse) {
-					ir->rawir.duration += rawir.duration;
-				} else {
-					ir->rawir.duration = rawir.duration;
-					ir->rawir.pulse = rawir.pulse;
-				}
-				if (ir->rem)
-					break;
-			}
-			rawir.duration += ir->rawir.duration;
-			ir->rawir.duration = 0;
-			ir->rawir.pulse = rawir.pulse;
+					 * MS_TO_NS(MCE_TIME_UNIT);
 
 			dev_dbg(ir->dev, "Storing %s with duration %d\n",
 				rawir.pulse ? "pulse" : "space",
 				rawir.duration);
 
-			ir_raw_event_store(ir->idev, &rawir);
+			ir_raw_event_store_with_filter(ir->rc, &rawir);
 			break;
 		case CMD_DATA:
 			ir->rem--;
@@ -839,17 +880,10 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 				continue;
 			}
 			ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK);
-			mceusb_dev_printdata(ir, ir->buf_in, i, ir->rem + 1, false);
-			if (ir->rem) {
+			mceusb_dev_printdata(ir, ir->buf_in,
+					     i, ir->rem + 1, false);
+			if (ir->rem)
 				ir->parser_state = PARSE_IRDATA;
-				break;
-			}
-			/*
-			 * a package with len=0 (e. g. 0x80) means end of
-			 * data. We could use it to do the call to
-			 * ir_raw_event_handle(). For now, we don't need to
-			 * use it.
-			 */
 			break;
 		}
 
@@ -857,7 +891,7 @@ static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len)
 			ir->parser_state = CMD_HEADER;
 	}
 	dev_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n");
-	ir_raw_event_handle(ir->idev);
+	ir_raw_event_handle(ir->rc);
 }
 
 static void mceusb_dev_recv(struct urb *urb, struct pt_regs *regs)
@@ -984,9 +1018,11 @@ static void mceusb_get_parameters(struct mceusb_dev *ir)
 	mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ));
 	mce_sync_in(ir, NULL, maxp);
 
-	/* get the transmitter bitmask */
-	mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
-	mce_sync_in(ir, NULL, maxp);
+	if (!ir->flags.no_tx) {
+		/* get the transmitter bitmask */
+		mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK));
+		mce_sync_in(ir, NULL, maxp);
+	}
 
 	/* get receiver timeout value */
 	mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT));
@@ -997,66 +1033,54 @@ static void mceusb_get_parameters(struct mceusb_dev *ir)
 	mce_sync_in(ir, NULL, maxp);
 }
 
-static struct input_dev *mceusb_init_input_dev(struct mceusb_dev *ir)
+static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
 {
-	struct input_dev *idev;
-	struct ir_dev_props *props;
 	struct device *dev = ir->dev;
-	const char *rc_map = RC_MAP_RC6_MCE;
-	const char *name = "Media Center Ed. eHome Infrared Remote Transceiver";
-	int ret = -ENODEV;
-
-	idev = input_allocate_device();
-	if (!idev) {
-		dev_err(dev, "remote input dev allocation failed\n");
-		goto idev_alloc_failed;
-	}
+	struct rc_dev *rc;
+	int ret;
 
-	ret = -ENOMEM;
-	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	if (!props) {
-		dev_err(dev, "remote ir dev props allocation failed\n");
-		goto props_alloc_failed;
+	rc = rc_allocate_device();
+	if (!rc) {
+		dev_err(dev, "remote dev allocation failed\n");
+		goto out;
 	}
 
-	if (mceusb_model[ir->model].name)
-		name = mceusb_model[ir->model].name;
-
 	snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)",
-		 name,
+		 mceusb_model[ir->model].name ?
+			mceusb_model[ir->model].name :
+			"Media Center Ed. eHome Infrared Remote Transceiver",
 		 le16_to_cpu(ir->usbdev->descriptor.idVendor),
 		 le16_to_cpu(ir->usbdev->descriptor.idProduct));
 
-	idev->name = ir->name;
 	usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
-	strlcat(ir->phys, "/input0", sizeof(ir->phys));
-	idev->phys = ir->phys;
-
-	props->priv = ir;
-	props->driver_type = RC_DRIVER_IR_RAW;
-	props->allowed_protos = IR_TYPE_ALL;
-	props->s_tx_mask = mceusb_set_tx_mask;
-	props->s_tx_carrier = mceusb_set_tx_carrier;
-	props->tx_ir = mceusb_tx_ir;
 
-	ir->props = props;
-
-	if (mceusb_model[ir->model].rc_map)
-		rc_map = mceusb_model[ir->model].rc_map;
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	usb_to_input_id(ir->usbdev, &rc->input_id);
+	rc->dev.parent = dev;
+	rc->priv = ir;
+	rc->driver_type = RC_DRIVER_IR_RAW;
+	rc->allowed_protos = RC_TYPE_ALL;
+	rc->timeout = MS_TO_NS(1000);
+	if (!ir->flags.no_tx) {
+		rc->s_tx_mask = mceusb_set_tx_mask;
+		rc->s_tx_carrier = mceusb_set_tx_carrier;
+		rc->tx_ir = mceusb_tx_ir;
+	}
+	rc->driver_name = DRIVER_NAME;
+	rc->map_name = mceusb_model[ir->model].rc_map ?
+			mceusb_model[ir->model].rc_map : RC_MAP_RC6_MCE;
 
-	ret = ir_input_register(idev, rc_map, props, DRIVER_NAME);
+	ret = rc_register_device(rc);
 	if (ret < 0) {
-		dev_err(dev, "remote input device register failed\n");
-		goto irdev_failed;
+		dev_err(dev, "remote dev registration failed\n");
+		goto out;
 	}
 
-	return idev;
+	return rc;
 
-irdev_failed:
-	kfree(props);
-props_alloc_failed:
-	input_free_device(idev);
-idev_alloc_failed:
+out:
+	rc_free_device(rc);
 	return NULL;
 }
 
@@ -1074,16 +1098,16 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	enum mceusb_model_type model = id->driver_info;
 	bool is_gen3;
 	bool is_microsoft_gen1;
-	bool tx_mask_inverted;
+	bool tx_mask_normal;
 	bool is_polaris;
 
-	dev_dbg(&intf->dev, ": %s called\n", __func__);
+	dev_dbg(&intf->dev, "%s called\n", __func__);
 
 	idesc  = intf->cur_altsetting;
 
 	is_gen3 = mceusb_model[model].mce_gen3;
 	is_microsoft_gen1 = mceusb_model[model].mce_gen1;
-	tx_mask_inverted = mceusb_model[model].tx_mask_inverted;
+	tx_mask_normal = mceusb_model[model].tx_mask_normal;
 	is_polaris = mceusb_model[model].is_polaris;
 
 	if (is_polaris) {
@@ -1107,7 +1131,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 			ep_in = ep;
 			ep_in->bmAttributes = USB_ENDPOINT_XFER_INT;
 			ep_in->bInterval = 1;
-			dev_dbg(&intf->dev, ": acceptable inbound endpoint "
+			dev_dbg(&intf->dev, "acceptable inbound endpoint "
 				"found\n");
 		}
 
@@ -1122,12 +1146,12 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 			ep_out = ep;
 			ep_out->bmAttributes = USB_ENDPOINT_XFER_INT;
 			ep_out->bInterval = 1;
-			dev_dbg(&intf->dev, ": acceptable outbound endpoint "
+			dev_dbg(&intf->dev, "acceptable outbound endpoint "
 				"found\n");
 		}
 	}
 	if (ep_in == NULL) {
-		dev_dbg(&intf->dev, ": inbound and/or endpoint not found\n");
+		dev_dbg(&intf->dev, "inbound and/or endpoint not found\n");
 		return -ENODEV;
 	}
 
@@ -1150,11 +1174,10 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	ir->dev = &intf->dev;
 	ir->len_in = maxp;
 	ir->flags.microsoft_gen1 = is_microsoft_gen1;
-	ir->flags.tx_mask_inverted = tx_mask_inverted;
+	ir->flags.tx_mask_normal = tx_mask_normal;
+	ir->flags.no_tx = mceusb_model[model].no_tx;
 	ir->model = model;
 
-	init_ir_raw_event(&ir->rawir);
-
 	/* Saving usb interface data for use by the transmitter routine */
 	ir->usb_ep_in = ep_in;
 	ir->usb_ep_out = ep_out;
@@ -1169,9 +1192,9 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 		snprintf(name + strlen(name), sizeof(name) - strlen(name),
 			 " %s", buf);
 
-	ir->idev = mceusb_init_input_dev(ir);
-	if (!ir->idev)
-		goto input_dev_fail;
+	ir->rc = mceusb_init_rc_dev(ir);
+	if (!ir->rc)
+		goto rc_dev_fail;
 
 	/* flush buffers on the device */
 	mce_sync_in(ir, NULL, maxp);
@@ -1191,7 +1214,8 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 
 	mceusb_get_parameters(ir);
 
-	mceusb_set_tx_mask(ir, MCE_DEFAULT_TX_MASK);
+	if (!ir->flags.no_tx)
+		mceusb_set_tx_mask(ir->rc, MCE_DEFAULT_TX_MASK);
 
 	usb_set_intfdata(intf, ir);
 
@@ -1201,7 +1225,7 @@ static int __devinit mceusb_dev_probe(struct usb_interface *intf,
 	return 0;
 
 	/* Error-handling path */
-input_dev_fail:
+rc_dev_fail:
 	usb_free_urb(ir->urb_in);
 urb_in_alloc_fail:
 	usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in);
@@ -1225,7 +1249,7 @@ static void __devexit mceusb_dev_disconnect(struct usb_interface *intf)
 		return;
 
 	ir->usbdev = NULL;
-	ir_input_unregister(ir->idev);
+	rc_unregister_device(ir->rc);
 	usb_kill_urb(ir->urb_in);
 	usb_free_urb(ir->urb_in);
 	usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in);
diff --git a/drivers/media/IR/nuvoton-cir.c b/drivers/media/rc/nuvoton-cir.c
index 301be53aee8..dd4caf8ef80 100644
--- a/drivers/media/IR/nuvoton-cir.c
+++ b/drivers/media/rc/nuvoton-cir.c
@@ -32,8 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/input.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <linux/pci_ids.h>
 
 #include "nuvoton-cir.h"
@@ -249,9 +248,12 @@ static int nvt_hw_detect(struct nvt_dev *nvt)
 	chip_minor = nvt_cr_read(nvt, CR_CHIP_ID_LO);
 	nvt_dbg("%s: chip id: 0x%02x 0x%02x", chip_id, chip_major, chip_minor);
 
-	if (chip_major != CHIP_ID_HIGH &&
-	    (chip_minor != CHIP_ID_LOW || chip_minor != CHIP_ID_LOW2))
+	if (chip_major != CHIP_ID_HIGH ||
+	    (chip_minor != CHIP_ID_LOW && chip_minor != CHIP_ID_LOW2)) {
+		nvt_pr(KERN_ERR, "%s: unsupported chip, id: 0x%02x 0x%02x",
+		       chip_id, chip_major, chip_minor);
 		ret = -ENODEV;
+	}
 
 	nvt_efm_disable(nvt);
 
@@ -476,9 +478,9 @@ static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt)
  * always set CP as 0x81
  * set CC by SPEC, CC = 3MHz/carrier - 1
  */
-static int nvt_set_tx_carrier(void *data, u32 carrier)
+static int nvt_set_tx_carrier(struct rc_dev *dev, u32 carrier)
 {
-	struct nvt_dev *nvt = data;
+	struct nvt_dev *nvt = dev->priv;
 	u16 val;
 
 	nvt_cir_reg_write(nvt, 1, CIR_CP);
@@ -509,9 +511,9 @@ static int nvt_set_tx_carrier(void *data, u32 carrier)
  * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to
  * set TXFCONT as 0xff, until buf_count less than 0xff.
  */
-static int nvt_tx_ir(void *priv, int *txbuf, u32 n)
+static int nvt_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
 {
-	struct nvt_dev *nvt = priv;
+	struct nvt_dev *nvt = dev->priv;
 	unsigned long flags;
 	size_t cur_count;
 	unsigned int i;
@@ -603,6 +605,8 @@ static void nvt_process_rx_ir_data(struct nvt_dev *nvt)
 	count = nvt->pkts;
 	nvt_dbg_verbose("Processing buffer of len %d", count);
 
+	init_ir_raw_event(&rawir);
+
 	for (i = 0; i < count; i++) {
 		nvt->pkts--;
 		sample = nvt->buf[i];
@@ -643,11 +647,15 @@ static void nvt_process_rx_ir_data(struct nvt_dev *nvt)
 		 * indicates end of IR signal, but new data incoming. In both
 		 * cases, it means we're ready to call ir_raw_event_handle
 		 */
-		if (sample == BUF_PULSE_BIT || ((sample != BUF_LEN_MASK) &&
-		    (sample & BUF_REPEAT_MASK) == BUF_REPEAT_BYTE))
+		if ((sample == BUF_PULSE_BIT) && nvt->pkts) {
+			nvt_dbg("Calling ir_raw_event_handle (signal end)\n");
 			ir_raw_event_handle(nvt->rdev);
+		}
 	}
 
+	nvt_dbg("Calling ir_raw_event_handle (buffer empty)\n");
+	ir_raw_event_handle(nvt->rdev);
+
 	if (nvt->pkts) {
 		nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts);
 		nvt->pkts = 0;
@@ -942,9 +950,9 @@ static void nvt_disable_cir(struct nvt_dev *nvt)
 	nvt_efm_disable(nvt);
 }
 
-static int nvt_open(void *data)
+static int nvt_open(struct rc_dev *dev)
 {
-	struct nvt_dev *nvt = (struct nvt_dev *)data;
+	struct nvt_dev *nvt = dev->priv;
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
@@ -955,9 +963,9 @@ static int nvt_open(void *data)
 	return 0;
 }
 
-static void nvt_close(void *data)
+static void nvt_close(struct rc_dev *dev)
 {
-	struct nvt_dev *nvt = (struct nvt_dev *)data;
+	struct nvt_dev *nvt = dev->priv;
 	unsigned long flags;
 
 	spin_lock_irqsave(&nvt->nvt_lock, flags);
@@ -969,21 +977,16 @@ static void nvt_close(void *data)
 /* Allocate memory, probe hardware, and initialize everything */
 static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
 {
-	struct nvt_dev *nvt = NULL;
-	struct input_dev *rdev = NULL;
-	struct ir_dev_props *props = NULL;
+	struct nvt_dev *nvt;
+	struct rc_dev *rdev;
 	int ret = -ENOMEM;
 
 	nvt = kzalloc(sizeof(struct nvt_dev), GFP_KERNEL);
 	if (!nvt)
 		return ret;
 
-	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	if (!props)
-		goto failure;
-
 	/* input device for IR remote (and tx) */
-	rdev = input_allocate_device();
+	rdev = rc_allocate_device();
 	if (!rdev)
 		goto failure;
 
@@ -1057,41 +1060,38 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
 	nvt_cir_regs_init(nvt);
 	nvt_cir_wake_regs_init(nvt);
 
-	/* Set up ir-core props */
-	props->priv = nvt;
-	props->driver_type = RC_DRIVER_IR_RAW;
-	props->allowed_protos = IR_TYPE_ALL;
-	props->open = nvt_open;
-	props->close = nvt_close;
+	/* Set up the rc device */
+	rdev->priv = nvt;
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+	rdev->allowed_protos = RC_TYPE_ALL;
+	rdev->open = nvt_open;
+	rdev->close = nvt_close;
+	rdev->tx_ir = nvt_tx_ir;
+	rdev->s_tx_carrier = nvt_set_tx_carrier;
+	rdev->input_name = "Nuvoton w836x7hg Infrared Remote Transceiver";
+	rdev->input_id.bustype = BUS_HOST;
+	rdev->input_id.vendor = PCI_VENDOR_ID_WINBOND2;
+	rdev->input_id.product = nvt->chip_major;
+	rdev->input_id.version = nvt->chip_minor;
+	rdev->driver_name = NVT_DRIVER_NAME;
+	rdev->map_name = RC_MAP_RC6_MCE;
 #if 0
-	props->min_timeout = XYZ;
-	props->max_timeout = XYZ;
-	props->timeout = XYZ;
+	rdev->min_timeout = XYZ;
+	rdev->max_timeout = XYZ;
+	rdev->timeout = XYZ;
 	/* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */
-	props->rx_resolution = XYZ;
-
+	rdev->rx_resolution = XYZ;
 	/* tx bits */
-	props->tx_resolution = XYZ;
+	rdev->tx_resolution = XYZ;
 #endif
-	props->tx_ir = nvt_tx_ir;
-	props->s_tx_carrier = nvt_set_tx_carrier;
-
-	rdev->name = "Nuvoton w836x7hg Infrared Remote Transceiver";
-	rdev->id.bustype = BUS_HOST;
-	rdev->id.vendor = PCI_VENDOR_ID_WINBOND2;
-	rdev->id.product = nvt->chip_major;
-	rdev->id.version = nvt->chip_minor;
 
-	nvt->props = props;
-	nvt->rdev = rdev;
-
-	device_set_wakeup_capable(&pdev->dev, 1);
-	device_set_wakeup_enable(&pdev->dev, 1);
-
-	ret = ir_input_register(rdev, RC_MAP_RC6_MCE, props, NVT_DRIVER_NAME);
+	ret = rc_register_device(rdev);
 	if (ret)
 		goto failure;
 
+	device_set_wakeup_capable(&pdev->dev, 1);
+	device_set_wakeup_enable(&pdev->dev, 1);
+	nvt->rdev = rdev;
 	nvt_pr(KERN_NOTICE, "driver has been successfully loaded\n");
 	if (debug) {
 		cir_dump_regs(nvt);
@@ -1111,8 +1111,7 @@ failure:
 	if (nvt->cir_wake_addr)
 		release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
 
-	input_free_device(rdev);
-	kfree(props);
+	rc_free_device(rdev);
 	kfree(nvt);
 
 	return ret;
@@ -1137,9 +1136,8 @@ static void __devexit nvt_remove(struct pnp_dev *pdev)
 	release_region(nvt->cir_addr, CIR_IOREG_LENGTH);
 	release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH);
 
-	ir_input_unregister(nvt->rdev);
+	rc_unregister_device(nvt->rdev);
 
-	kfree(nvt->props);
 	kfree(nvt);
 }
 
diff --git a/drivers/media/IR/nuvoton-cir.h b/drivers/media/rc/nuvoton-cir.h
index 62dc53017c8..1df82351cb0 100644
--- a/drivers/media/IR/nuvoton-cir.h
+++ b/drivers/media/rc/nuvoton-cir.h
@@ -66,8 +66,7 @@ static int debug;
 
 struct nvt_dev {
 	struct pnp_dev *pdev;
-	struct input_dev *rdev;
-	struct ir_dev_props *props;
+	struct rc_dev *rdev;
 	struct ir_raw_event rawir;
 
 	spinlock_t nvt_lock;
diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/rc/rc-core-priv.h
index 81c936bd793..873b3878975 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/rc/rc-core-priv.h
@@ -13,22 +13,22 @@
  *  GNU General Public License for more details.
  */
 
-#ifndef _IR_RAW_EVENT
-#define _IR_RAW_EVENT
+#ifndef _RC_CORE_PRIV
+#define _RC_CORE_PRIV
 
 #include <linux/slab.h>
 #include <linux/spinlock.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 struct ir_raw_handler {
 	struct list_head list;
 
 	u64 protocols; /* which are handled by this handler */
-	int (*decode)(struct input_dev *input_dev, struct ir_raw_event event);
+	int (*decode)(struct rc_dev *dev, struct ir_raw_event event);
 
 	/* These two should only be used by the lirc decoder */
-	int (*raw_register)(struct input_dev *input_dev);
-	int (*raw_unregister)(struct input_dev *input_dev);
+	int (*raw_register)(struct rc_dev *dev);
+	int (*raw_unregister)(struct rc_dev *dev);
 };
 
 struct ir_raw_event_ctrl {
@@ -38,7 +38,7 @@ struct ir_raw_event_ctrl {
 	struct kfifo			kfifo;		/* fifo for the pulse/space durations */
 	ktime_t				last_event;	/* when last event occurred */
 	enum raw_event_type		last_type;	/* last event type */
-	struct input_dev		*input_dev;	/* pointer to the parent input_dev */
+	struct rc_dev			*dev;		/* pointer to the parent rc_dev */
 	u64				enabled_protocols; /* enabled raw protocol decoders */
 
 	/* raw decoder state follows */
@@ -85,7 +85,7 @@ struct ir_raw_event_ctrl {
 		unsigned wanted_bits;
 	} rc5_sz;
 	struct lirc_codec {
-		struct ir_input_dev *ir_dev;
+		struct rc_dev *dev;
 		struct lirc_driver *drv;
 		int carrier_low;
 
@@ -129,27 +129,17 @@ static inline bool is_timing_event(struct ir_raw_event ev)
 
 #define TO_US(duration)			DIV_ROUND_CLOSEST((duration), 1000)
 #define TO_STR(is_pulse)		((is_pulse) ? "pulse" : "space")
-/*
- * Routines from ir-sysfs.c - Meant to be called only internally inside
- * ir-core
- */
-int ir_register_input(struct input_dev *input_dev);
-
-int ir_register_class(struct input_dev *input_dev);
-void ir_unregister_class(struct input_dev *input_dev);
 
 /*
- * Routines from ir-raw-event.c to be used internally and by decoders
+ * Routines from rc-raw.c to be used internally and by decoders
  */
 u64 ir_raw_get_allowed_protocols(void);
-int ir_raw_event_register(struct input_dev *input_dev);
-void ir_raw_event_unregister(struct input_dev *input_dev);
+int ir_raw_event_register(struct rc_dev *dev);
+void ir_raw_event_unregister(struct rc_dev *dev);
 int ir_raw_handler_register(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_handler_unregister(struct ir_raw_handler *ir_raw_handler);
 void ir_raw_init(void);
 
-int ir_rcmap_init(void);
-void ir_rcmap_cleanup(void);
 /*
  * Decoder initialization code
  *
@@ -200,4 +190,4 @@ void ir_rcmap_cleanup(void);
 #endif
 
 
-#endif /* _IR_RAW_EVENT */
+#endif /* _RC_CORE_PRIV */
diff --git a/drivers/media/rc/rc-loopback.c b/drivers/media/rc/rc-loopback.c
new file mode 100644
index 00000000000..49cee61d79c
--- /dev/null
+++ b/drivers/media/rc/rc-loopback.c
@@ -0,0 +1,260 @@
+/*
+ * Loopback driver for rc-core,
+ *
+ * Copyright (c) 2010 David Härdeman <david@hardeman.nu>
+ *
+ * This driver receives TX data and passes it back as RX data,
+ * which is useful for (scripted) debugging of rc-core without
+ * having to use actual hardware.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <media/rc-core.h>
+
+#define DRIVER_NAME	"rc-loopback"
+#define dprintk(x...)	if (debug) printk(KERN_INFO DRIVER_NAME ": " x)
+#define RXMASK_REGULAR	0x1
+#define RXMASK_LEARNING	0x2
+
+static bool debug;
+
+struct loopback_dev {
+	struct rc_dev *dev;
+	u32 txmask;
+	u32 txcarrier;
+	u32 txduty;
+	bool idle;
+	bool learning;
+	bool carrierreport;
+	u32 rxcarriermin;
+	u32 rxcarriermax;
+};
+
+static struct loopback_dev loopdev;
+
+static int loop_set_tx_mask(struct rc_dev *dev, u32 mask)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if ((mask & (RXMASK_REGULAR | RXMASK_LEARNING)) != mask) {
+		dprintk("invalid tx mask: %u\n", mask);
+		return -EINVAL;
+	}
+
+	dprintk("setting tx mask: %u\n", mask);
+	lodev->txmask = mask;
+	return 0;
+}
+
+static int loop_set_tx_carrier(struct rc_dev *dev, u32 carrier)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	dprintk("setting tx carrier: %u\n", carrier);
+	lodev->txcarrier = carrier;
+	return 0;
+}
+
+static int loop_set_tx_duty_cycle(struct rc_dev *dev, u32 duty_cycle)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if (duty_cycle < 1 || duty_cycle > 99) {
+		dprintk("invalid duty cycle: %u\n", duty_cycle);
+		return -EINVAL;
+	}
+
+	dprintk("setting duty cycle: %u\n", duty_cycle);
+	lodev->txduty = duty_cycle;
+	return 0;
+}
+
+static int loop_set_rx_carrier_range(struct rc_dev *dev, u32 min, u32 max)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if (min < 1 || min > max) {
+		dprintk("invalid rx carrier range %u to %u\n", min, max);
+		return -EINVAL;
+	}
+
+	dprintk("setting rx carrier range %u to %u\n", min, max);
+	lodev->rxcarriermin = min;
+	lodev->rxcarriermax = max;
+	return 0;
+}
+
+static int loop_tx_ir(struct rc_dev *dev, int *txbuf, u32 n)
+{
+	struct loopback_dev *lodev = dev->priv;
+	u32 rxmask;
+	unsigned count;
+	unsigned total_duration = 0;
+	unsigned i;
+	DEFINE_IR_RAW_EVENT(rawir);
+
+	if (n == 0 || n % sizeof(int)) {
+		dprintk("invalid tx buffer size\n");
+		return -EINVAL;
+	}
+
+	count = n / sizeof(int);
+	for (i = 0; i < count; i++)
+		total_duration += abs(txbuf[i]);
+
+	if (total_duration == 0) {
+		dprintk("invalid tx data, total duration zero\n");
+		return -EINVAL;
+	}
+
+	if (lodev->txcarrier < lodev->rxcarriermin ||
+	    lodev->txcarrier > lodev->rxcarriermax) {
+		dprintk("ignoring tx, carrier out of range\n");
+		goto out;
+	}
+
+	if (lodev->learning)
+		rxmask = RXMASK_LEARNING;
+	else
+		rxmask = RXMASK_REGULAR;
+
+	if (!(rxmask & lodev->txmask)) {
+		dprintk("ignoring tx, rx mask mismatch\n");
+		goto out;
+	}
+
+	for (i = 0; i < count; i++) {
+		rawir.pulse = i % 2 ? false : true;
+		rawir.duration = abs(txbuf[i]) * 1000;
+		if (rawir.duration)
+			ir_raw_event_store_with_filter(dev, &rawir);
+	}
+	ir_raw_event_handle(dev);
+
+out:
+	/* Lirc expects this function to take as long as the total duration */
+	set_current_state(TASK_INTERRUPTIBLE);
+	schedule_timeout(usecs_to_jiffies(total_duration));
+	return n;
+}
+
+static void loop_set_idle(struct rc_dev *dev, bool enable)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if (lodev->idle != enable) {
+		dprintk("%sing idle mode\n", enable ? "enter" : "exit");
+		lodev->idle = enable;
+	}
+}
+
+static int loop_set_learning_mode(struct rc_dev *dev, int enable)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if (lodev->learning != enable) {
+		dprintk("%sing learning mode\n", enable ? "enter" : "exit");
+		lodev->learning = !!enable;
+	}
+
+	return 0;
+}
+
+static int loop_set_carrier_report(struct rc_dev *dev, int enable)
+{
+	struct loopback_dev *lodev = dev->priv;
+
+	if (lodev->carrierreport != enable) {
+		dprintk("%sabling carrier reports\n", enable ? "en" : "dis");
+		lodev->carrierreport = !!enable;
+	}
+
+	return 0;
+}
+
+static int __init loop_init(void)
+{
+	struct rc_dev *rc;
+	int ret;
+
+	rc = rc_allocate_device();
+	if (!rc) {
+		printk(KERN_ERR DRIVER_NAME ": rc_dev allocation failed\n");
+		return -ENOMEM;
+	}
+
+	rc->input_name		= "rc-core loopback device";
+	rc->input_phys		= "rc-core/virtual";
+	rc->input_id.bustype	= BUS_VIRTUAL;
+	rc->input_id.version	= 1;
+	rc->driver_name		= DRIVER_NAME;
+	rc->map_name		= RC_MAP_EMPTY;
+	rc->priv		= &loopdev;
+	rc->driver_type		= RC_DRIVER_IR_RAW;
+	rc->allowed_protos	= RC_TYPE_ALL;
+	rc->timeout		= 100 * 1000 * 1000; /* 100 ms */
+	rc->min_timeout		= 1;
+	rc->max_timeout		= UINT_MAX;
+	rc->rx_resolution	= 1000;
+	rc->tx_resolution	= 1000;
+	rc->s_tx_mask		= loop_set_tx_mask;
+	rc->s_tx_carrier	= loop_set_tx_carrier;
+	rc->s_tx_duty_cycle	= loop_set_tx_duty_cycle;
+	rc->s_rx_carrier_range	= loop_set_rx_carrier_range;
+	rc->tx_ir		= loop_tx_ir;
+	rc->s_idle		= loop_set_idle;
+	rc->s_learning_mode	= loop_set_learning_mode;
+	rc->s_carrier_report	= loop_set_carrier_report;
+	rc->priv		= &loopdev;
+
+	loopdev.txmask		= RXMASK_REGULAR;
+	loopdev.txcarrier	= 36000;
+	loopdev.txduty		= 50;
+	loopdev.rxcarriermin	= 1;
+	loopdev.rxcarriermax	= ~0;
+	loopdev.idle		= true;
+	loopdev.learning	= false;
+	loopdev.carrierreport	= false;
+
+	ret = rc_register_device(rc);
+	if (ret < 0) {
+		printk(KERN_ERR DRIVER_NAME ": rc_dev registration failed\n");
+		rc_free_device(rc);
+		return ret;
+	}
+
+	loopdev.dev = rc;
+	return 0;
+}
+
+static void __exit loop_exit(void)
+{
+	rc_unregister_device(loopdev.dev);
+}
+
+module_init(loop_init);
+module_exit(loop_exit);
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable debug messages");
+
+MODULE_DESCRIPTION("Loopback device for rc-core debugging");
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
new file mode 100644
index 00000000000..72be8a02118
--- /dev/null
+++ b/drivers/media/rc/rc-main.c
@@ -0,0 +1,1135 @@
+/* rc-main.c - Remote Controller core module
+ *
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#include <media/rc-core.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include "rc-core-priv.h"
+
+/* Sizes are in bytes, 256 bytes allows for 32 entries on x64 */
+#define IR_TAB_MIN_SIZE	256
+#define IR_TAB_MAX_SIZE	8192
+
+/* FIXME: IR_KEYPRESS_TIMEOUT should be protocol specific */
+#define IR_KEYPRESS_TIMEOUT 250
+
+/* Used to keep track of known keymaps */
+static LIST_HEAD(rc_map_list);
+static DEFINE_SPINLOCK(rc_map_lock);
+
+static struct rc_map_list *seek_rc_map(const char *name)
+{
+	struct rc_map_list *map = NULL;
+
+	spin_lock(&rc_map_lock);
+	list_for_each_entry(map, &rc_map_list, list) {
+		if (!strcmp(name, map->map.name)) {
+			spin_unlock(&rc_map_lock);
+			return map;
+		}
+	}
+	spin_unlock(&rc_map_lock);
+
+	return NULL;
+}
+
+struct rc_map *rc_map_get(const char *name)
+{
+
+	struct rc_map_list *map;
+
+	map = seek_rc_map(name);
+#ifdef MODULE
+	if (!map) {
+		int rc = request_module(name);
+		if (rc < 0) {
+			printk(KERN_ERR "Couldn't load IR keymap %s\n", name);
+			return NULL;
+		}
+		msleep(20);	/* Give some time for IR to register */
+
+		map = seek_rc_map(name);
+	}
+#endif
+	if (!map) {
+		printk(KERN_ERR "IR keymap %s not found\n", name);
+		return NULL;
+	}
+
+	printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
+
+	return &map->map;
+}
+EXPORT_SYMBOL_GPL(rc_map_get);
+
+int rc_map_register(struct rc_map_list *map)
+{
+	spin_lock(&rc_map_lock);
+	list_add_tail(&map->list, &rc_map_list);
+	spin_unlock(&rc_map_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rc_map_register);
+
+void rc_map_unregister(struct rc_map_list *map)
+{
+	spin_lock(&rc_map_lock);
+	list_del(&map->list);
+	spin_unlock(&rc_map_lock);
+}
+EXPORT_SYMBOL_GPL(rc_map_unregister);
+
+
+static struct rc_map_table empty[] = {
+	{ 0x2a, KEY_COFFEE },
+};
+
+static struct rc_map_list empty_map = {
+	.map = {
+		.scan    = empty,
+		.size    = ARRAY_SIZE(empty),
+		.rc_type = RC_TYPE_UNKNOWN,	/* Legacy IR type */
+		.name    = RC_MAP_EMPTY,
+	}
+};
+
+/**
+ * ir_create_table() - initializes a scancode table
+ * @rc_map:	the rc_map to initialize
+ * @name:	name to assign to the table
+ * @rc_type:	ir type to assign to the new table
+ * @size:	initial size of the table
+ * @return:	zero on success or a negative error code
+ *
+ * This routine will initialize the rc_map and will allocate
+ * memory to hold at least the specified number of elements.
+ */
+static int ir_create_table(struct rc_map *rc_map,
+			   const char *name, u64 rc_type, size_t size)
+{
+	rc_map->name = name;
+	rc_map->rc_type = rc_type;
+	rc_map->alloc = roundup_pow_of_two(size * sizeof(struct rc_map_table));
+	rc_map->size = rc_map->alloc / sizeof(struct rc_map_table);
+	rc_map->scan = kmalloc(rc_map->alloc, GFP_KERNEL);
+	if (!rc_map->scan)
+		return -ENOMEM;
+
+	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+		   rc_map->size, rc_map->alloc);
+	return 0;
+}
+
+/**
+ * ir_free_table() - frees memory allocated by a scancode table
+ * @rc_map:	the table whose mappings need to be freed
+ *
+ * This routine will free memory alloctaed for key mappings used by given
+ * scancode table.
+ */
+static void ir_free_table(struct rc_map *rc_map)
+{
+	rc_map->size = 0;
+	kfree(rc_map->scan);
+	rc_map->scan = NULL;
+}
+
+/**
+ * ir_resize_table() - resizes a scancode table if necessary
+ * @rc_map:	the rc_map to resize
+ * @gfp_flags:	gfp flags to use when allocating memory
+ * @return:	zero on success or a negative error code
+ *
+ * This routine will shrink the rc_map if it has lots of
+ * unused entries and grow it if it is full.
+ */
+static int ir_resize_table(struct rc_map *rc_map, gfp_t gfp_flags)
+{
+	unsigned int oldalloc = rc_map->alloc;
+	unsigned int newalloc = oldalloc;
+	struct rc_map_table *oldscan = rc_map->scan;
+	struct rc_map_table *newscan;
+
+	if (rc_map->size == rc_map->len) {
+		/* All entries in use -> grow keytable */
+		if (rc_map->alloc >= IR_TAB_MAX_SIZE)
+			return -ENOMEM;
+
+		newalloc *= 2;
+		IR_dprintk(1, "Growing table to %u bytes\n", newalloc);
+	}
+
+	if ((rc_map->len * 3 < rc_map->size) && (oldalloc > IR_TAB_MIN_SIZE)) {
+		/* Less than 1/3 of entries in use -> shrink keytable */
+		newalloc /= 2;
+		IR_dprintk(1, "Shrinking table to %u bytes\n", newalloc);
+	}
+
+	if (newalloc == oldalloc)
+		return 0;
+
+	newscan = kmalloc(newalloc, gfp_flags);
+	if (!newscan) {
+		IR_dprintk(1, "Failed to kmalloc %u bytes\n", newalloc);
+		return -ENOMEM;
+	}
+
+	memcpy(newscan, rc_map->scan, rc_map->len * sizeof(struct rc_map_table));
+	rc_map->scan = newscan;
+	rc_map->alloc = newalloc;
+	rc_map->size = rc_map->alloc / sizeof(struct rc_map_table);
+	kfree(oldscan);
+	return 0;
+}
+
+/**
+ * ir_update_mapping() - set a keycode in the scancode->keycode table
+ * @dev:	the struct rc_dev device descriptor
+ * @rc_map:	scancode table to be adjusted
+ * @index:	index of the mapping that needs to be updated
+ * @keycode:	the desired keycode
+ * @return:	previous keycode assigned to the mapping
+ *
+ * This routine is used to update scancode->keycode mapping at given
+ * position.
+ */
+static unsigned int ir_update_mapping(struct rc_dev *dev,
+				      struct rc_map *rc_map,
+				      unsigned int index,
+				      unsigned int new_keycode)
+{
+	int old_keycode = rc_map->scan[index].keycode;
+	int i;
+
+	/* Did the user wish to remove the mapping? */
+	if (new_keycode == KEY_RESERVED || new_keycode == KEY_UNKNOWN) {
+		IR_dprintk(1, "#%d: Deleting scan 0x%04x\n",
+			   index, rc_map->scan[index].scancode);
+		rc_map->len--;
+		memmove(&rc_map->scan[index], &rc_map->scan[index+ 1],
+			(rc_map->len - index) * sizeof(struct rc_map_table));
+	} else {
+		IR_dprintk(1, "#%d: %s scan 0x%04x with key 0x%04x\n",
+			   index,
+			   old_keycode == KEY_RESERVED ? "New" : "Replacing",
+			   rc_map->scan[index].scancode, new_keycode);
+		rc_map->scan[index].keycode = new_keycode;
+		__set_bit(new_keycode, dev->input_dev->keybit);
+	}
+
+	if (old_keycode != KEY_RESERVED) {
+		/* A previous mapping was updated... */
+		__clear_bit(old_keycode, dev->input_dev->keybit);
+		/* ... but another scancode might use the same keycode */
+		for (i = 0; i < rc_map->len; i++) {
+			if (rc_map->scan[i].keycode == old_keycode) {
+				__set_bit(old_keycode, dev->input_dev->keybit);
+				break;
+			}
+		}
+
+		/* Possibly shrink the keytable, failure is not a problem */
+		ir_resize_table(rc_map, GFP_ATOMIC);
+	}
+
+	return old_keycode;
+}
+
+/**
+ * ir_establish_scancode() - set a keycode in the scancode->keycode table
+ * @dev:	the struct rc_dev device descriptor
+ * @rc_map:	scancode table to be searched
+ * @scancode:	the desired scancode
+ * @resize:	controls whether we allowed to resize the table to
+ *		accomodate not yet present scancodes
+ * @return:	index of the mapping containing scancode in question
+ *		or -1U in case of failure.
+ *
+ * This routine is used to locate given scancode in rc_map.
+ * If scancode is not yet present the routine will allocate a new slot
+ * for it.
+ */
+static unsigned int ir_establish_scancode(struct rc_dev *dev,
+					  struct rc_map *rc_map,
+					  unsigned int scancode,
+					  bool resize)
+{
+	unsigned int i;
+
+	/*
+	 * Unfortunately, some hardware-based IR decoders don't provide
+	 * all bits for the complete IR code. In general, they provide only
+	 * the command part of the IR code. Yet, as it is possible to replace
+	 * the provided IR with another one, it is needed to allow loading
+	 * IR tables from other remotes. So, we support specifying a mask to
+	 * indicate the valid bits of the scancodes.
+	 */
+	if (dev->scanmask)
+		scancode &= dev->scanmask;
+
+	/* First check if we already have a mapping for this ir command */
+	for (i = 0; i < rc_map->len; i++) {
+		if (rc_map->scan[i].scancode == scancode)
+			return i;
+
+		/* Keytable is sorted from lowest to highest scancode */
+		if (rc_map->scan[i].scancode >= scancode)
+			break;
+	}
+
+	/* No previous mapping found, we might need to grow the table */
+	if (rc_map->size == rc_map->len) {
+		if (!resize || ir_resize_table(rc_map, GFP_ATOMIC))
+			return -1U;
+	}
+
+	/* i is the proper index to insert our new keycode */
+	if (i < rc_map->len)
+		memmove(&rc_map->scan[i + 1], &rc_map->scan[i],
+			(rc_map->len - i) * sizeof(struct rc_map_table));
+	rc_map->scan[i].scancode = scancode;
+	rc_map->scan[i].keycode = KEY_RESERVED;
+	rc_map->len++;
+
+	return i;
+}
+
+/**
+ * ir_setkeycode() - set a keycode in the scancode->keycode table
+ * @idev:	the struct input_dev device descriptor
+ * @scancode:	the desired scancode
+ * @keycode:	result
+ * @return:	-EINVAL if the keycode could not be inserted, otherwise zero.
+ *
+ * This routine is used to handle evdev EVIOCSKEY ioctl.
+ */
+static int ir_setkeycode(struct input_dev *idev,
+			 const struct input_keymap_entry *ke,
+			 unsigned int *old_keycode)
+{
+	struct rc_dev *rdev = input_get_drvdata(idev);
+	struct rc_map *rc_map = &rdev->rc_map;
+	unsigned int index;
+	unsigned int scancode;
+	int retval = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc_map->lock, flags);
+
+	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+		index = ke->index;
+		if (index >= rc_map->len) {
+			retval = -EINVAL;
+			goto out;
+		}
+	} else {
+		retval = input_scancode_to_scalar(ke, &scancode);
+		if (retval)
+			goto out;
+
+		index = ir_establish_scancode(rdev, rc_map, scancode, true);
+		if (index >= rc_map->len) {
+			retval = -ENOMEM;
+			goto out;
+		}
+	}
+
+	*old_keycode = ir_update_mapping(rdev, rc_map, index, ke->keycode);
+
+out:
+	spin_unlock_irqrestore(&rc_map->lock, flags);
+	return retval;
+}
+
+/**
+ * ir_setkeytable() - sets several entries in the scancode->keycode table
+ * @dev:	the struct rc_dev device descriptor
+ * @to:		the struct rc_map to copy entries to
+ * @from:	the struct rc_map to copy entries from
+ * @return:	-ENOMEM if all keycodes could not be inserted, otherwise zero.
+ *
+ * This routine is used to handle table initialization.
+ */
+static int ir_setkeytable(struct rc_dev *dev,
+			  const struct rc_map *from)
+{
+	struct rc_map *rc_map = &dev->rc_map;
+	unsigned int i, index;
+	int rc;
+
+	rc = ir_create_table(rc_map, from->name,
+			     from->rc_type, from->size);
+	if (rc)
+		return rc;
+
+	IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
+		   rc_map->size, rc_map->alloc);
+
+	for (i = 0; i < from->size; i++) {
+		index = ir_establish_scancode(dev, rc_map,
+					      from->scan[i].scancode, false);
+		if (index >= rc_map->len) {
+			rc = -ENOMEM;
+			break;
+		}
+
+		ir_update_mapping(dev, rc_map, index,
+				  from->scan[i].keycode);
+	}
+
+	if (rc)
+		ir_free_table(rc_map);
+
+	return rc;
+}
+
+/**
+ * ir_lookup_by_scancode() - locate mapping by scancode
+ * @rc_map:	the struct rc_map to search
+ * @scancode:	scancode to look for in the table
+ * @return:	index in the table, -1U if not found
+ *
+ * This routine performs binary search in RC keykeymap table for
+ * given scancode.
+ */
+static unsigned int ir_lookup_by_scancode(const struct rc_map *rc_map,
+					  unsigned int scancode)
+{
+	int start = 0;
+	int end = rc_map->len - 1;
+	int mid;
+
+	while (start <= end) {
+		mid = (start + end) / 2;
+		if (rc_map->scan[mid].scancode < scancode)
+			start = mid + 1;
+		else if (rc_map->scan[mid].scancode > scancode)
+			end = mid - 1;
+		else
+			return mid;
+	}
+
+	return -1U;
+}
+
+/**
+ * ir_getkeycode() - get a keycode from the scancode->keycode table
+ * @idev:	the struct input_dev device descriptor
+ * @scancode:	the desired scancode
+ * @keycode:	used to return the keycode, if found, or KEY_RESERVED
+ * @return:	always returns zero.
+ *
+ * This routine is used to handle evdev EVIOCGKEY ioctl.
+ */
+static int ir_getkeycode(struct input_dev *idev,
+			 struct input_keymap_entry *ke)
+{
+	struct rc_dev *rdev = input_get_drvdata(idev);
+	struct rc_map *rc_map = &rdev->rc_map;
+	struct rc_map_table *entry;
+	unsigned long flags;
+	unsigned int index;
+	unsigned int scancode;
+	int retval;
+
+	spin_lock_irqsave(&rc_map->lock, flags);
+
+	if (ke->flags & INPUT_KEYMAP_BY_INDEX) {
+		index = ke->index;
+	} else {
+		retval = input_scancode_to_scalar(ke, &scancode);
+		if (retval)
+			goto out;
+
+		index = ir_lookup_by_scancode(rc_map, scancode);
+	}
+
+	if (index >= rc_map->len) {
+		if (!(ke->flags & INPUT_KEYMAP_BY_INDEX))
+			IR_dprintk(1, "unknown key for scancode 0x%04x\n",
+				   scancode);
+		retval = -EINVAL;
+		goto out;
+	}
+
+	entry = &rc_map->scan[index];
+
+	ke->index = index;
+	ke->keycode = entry->keycode;
+	ke->len = sizeof(entry->scancode);
+	memcpy(ke->scancode, &entry->scancode, sizeof(entry->scancode));
+
+	retval = 0;
+
+out:
+	spin_unlock_irqrestore(&rc_map->lock, flags);
+	return retval;
+}
+
+/**
+ * rc_g_keycode_from_table() - gets the keycode that corresponds to a scancode
+ * @dev:	the struct rc_dev descriptor of the device
+ * @scancode:	the scancode to look for
+ * @return:	the corresponding keycode, or KEY_RESERVED
+ *
+ * This routine is used by drivers which need to convert a scancode to a
+ * keycode. Normally it should not be used since drivers should have no
+ * interest in keycodes.
+ */
+u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
+{
+	struct rc_map *rc_map = &dev->rc_map;
+	unsigned int keycode;
+	unsigned int index;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rc_map->lock, flags);
+
+	index = ir_lookup_by_scancode(rc_map, scancode);
+	keycode = index < rc_map->len ?
+			rc_map->scan[index].keycode : KEY_RESERVED;
+
+	spin_unlock_irqrestore(&rc_map->lock, flags);
+
+	if (keycode != KEY_RESERVED)
+		IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
+			   dev->input_name, scancode, keycode);
+
+	return keycode;
+}
+EXPORT_SYMBOL_GPL(rc_g_keycode_from_table);
+
+/**
+ * ir_do_keyup() - internal function to signal the release of a keypress
+ * @dev:	the struct rc_dev descriptor of the device
+ *
+ * This function is used internally to release a keypress, it must be
+ * called with keylock held.
+ */
+static void ir_do_keyup(struct rc_dev *dev)
+{
+	if (!dev->keypressed)
+		return;
+
+	IR_dprintk(1, "keyup key 0x%04x\n", dev->last_keycode);
+	input_report_key(dev->input_dev, dev->last_keycode, 0);
+	input_sync(dev->input_dev);
+	dev->keypressed = false;
+}
+
+/**
+ * rc_keyup() - signals the release of a keypress
+ * @dev:	the struct rc_dev descriptor of the device
+ *
+ * This routine is used to signal that a key has been released on the
+ * remote control.
+ */
+void rc_keyup(struct rc_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->keylock, flags);
+	ir_do_keyup(dev);
+	spin_unlock_irqrestore(&dev->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(rc_keyup);
+
+/**
+ * ir_timer_keyup() - generates a keyup event after a timeout
+ * @cookie:	a pointer to the struct rc_dev for the device
+ *
+ * This routine will generate a keyup event some time after a keydown event
+ * is generated when no further activity has been detected.
+ */
+static void ir_timer_keyup(unsigned long cookie)
+{
+	struct rc_dev *dev = (struct rc_dev *)cookie;
+	unsigned long flags;
+
+	/*
+	 * ir->keyup_jiffies is used to prevent a race condition if a
+	 * hardware interrupt occurs at this point and the keyup timer
+	 * event is moved further into the future as a result.
+	 *
+	 * The timer will then be reactivated and this function called
+	 * again in the future. We need to exit gracefully in that case
+	 * to allow the input subsystem to do its auto-repeat magic or
+	 * a keyup event might follow immediately after the keydown.
+	 */
+	spin_lock_irqsave(&dev->keylock, flags);
+	if (time_is_before_eq_jiffies(dev->keyup_jiffies))
+		ir_do_keyup(dev);
+	spin_unlock_irqrestore(&dev->keylock, flags);
+}
+
+/**
+ * rc_repeat() - signals that a key is still pressed
+ * @dev:	the struct rc_dev descriptor of the device
+ *
+ * This routine is used by IR decoders when a repeat message which does
+ * not include the necessary bits to reproduce the scancode has been
+ * received.
+ */
+void rc_repeat(struct rc_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->keylock, flags);
+
+	input_event(dev->input_dev, EV_MSC, MSC_SCAN, dev->last_scancode);
+
+	if (!dev->keypressed)
+		goto out;
+
+	dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+	mod_timer(&dev->timer_keyup, dev->keyup_jiffies);
+
+out:
+	spin_unlock_irqrestore(&dev->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(rc_repeat);
+
+/**
+ * ir_do_keydown() - internal function to process a keypress
+ * @dev:	the struct rc_dev descriptor of the device
+ * @scancode:   the scancode of the keypress
+ * @keycode:    the keycode of the keypress
+ * @toggle:     the toggle value of the keypress
+ *
+ * This function is used internally to register a keypress, it must be
+ * called with keylock held.
+ */
+static void ir_do_keydown(struct rc_dev *dev, int scancode,
+			  u32 keycode, u8 toggle)
+{
+	input_event(dev->input_dev, EV_MSC, MSC_SCAN, scancode);
+
+	/* Repeat event? */
+	if (dev->keypressed &&
+	    dev->last_scancode == scancode &&
+	    dev->last_toggle == toggle)
+		return;
+
+	/* Release old keypress */
+	ir_do_keyup(dev);
+
+	dev->last_scancode = scancode;
+	dev->last_toggle = toggle;
+	dev->last_keycode = keycode;
+
+	if (keycode == KEY_RESERVED)
+		return;
+
+	/* Register a keypress */
+	dev->keypressed = true;
+	IR_dprintk(1, "%s: key down event, key 0x%04x, scancode 0x%04x\n",
+		   dev->input_name, keycode, scancode);
+	input_report_key(dev->input_dev, dev->last_keycode, 1);
+	input_sync(dev->input_dev);
+}
+
+/**
+ * rc_keydown() - generates input event for a key press
+ * @dev:	the struct rc_dev descriptor of the device
+ * @scancode:   the scancode that we're seeking
+ * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
+ *              support toggle values, this should be set to zero)
+ *
+ * This routine is used to signal that a key has been pressed on the
+ * remote control.
+ */
+void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle)
+{
+	unsigned long flags;
+	u32 keycode = rc_g_keycode_from_table(dev, scancode);
+
+	spin_lock_irqsave(&dev->keylock, flags);
+	ir_do_keydown(dev, scancode, keycode, toggle);
+
+	if (dev->keypressed) {
+		dev->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
+		mod_timer(&dev->timer_keyup, dev->keyup_jiffies);
+	}
+	spin_unlock_irqrestore(&dev->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(rc_keydown);
+
+/**
+ * rc_keydown_notimeout() - generates input event for a key press without
+ *                          an automatic keyup event at a later time
+ * @dev:	the struct rc_dev descriptor of the device
+ * @scancode:   the scancode that we're seeking
+ * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
+ *              support toggle values, this should be set to zero)
+ *
+ * This routine is used to signal that a key has been pressed on the
+ * remote control. The driver must manually call rc_keyup() at a later stage.
+ */
+void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
+{
+	unsigned long flags;
+	u32 keycode = rc_g_keycode_from_table(dev, scancode);
+
+	spin_lock_irqsave(&dev->keylock, flags);
+	ir_do_keydown(dev, scancode, keycode, toggle);
+	spin_unlock_irqrestore(&dev->keylock, flags);
+}
+EXPORT_SYMBOL_GPL(rc_keydown_notimeout);
+
+static int ir_open(struct input_dev *idev)
+{
+	struct rc_dev *rdev = input_get_drvdata(idev);
+
+	return rdev->open(rdev);
+}
+
+static void ir_close(struct input_dev *idev)
+{
+	struct rc_dev *rdev = input_get_drvdata(idev);
+
+	rdev->close(rdev);
+}
+
+/* class for /sys/class/rc */
+static char *ir_devnode(struct device *dev, mode_t *mode)
+{
+	return kasprintf(GFP_KERNEL, "rc/%s", dev_name(dev));
+}
+
+static struct class ir_input_class = {
+	.name		= "rc",
+	.devnode	= ir_devnode,
+};
+
+static struct {
+	u64	type;
+	char	*name;
+} proto_names[] = {
+	{ RC_TYPE_UNKNOWN,	"unknown"	},
+	{ RC_TYPE_RC5,		"rc-5"		},
+	{ RC_TYPE_NEC,		"nec"		},
+	{ RC_TYPE_RC6,		"rc-6"		},
+	{ RC_TYPE_JVC,		"jvc"		},
+	{ RC_TYPE_SONY,		"sony"		},
+	{ RC_TYPE_RC5_SZ,	"rc-5-sz"	},
+	{ RC_TYPE_LIRC,		"lirc"		},
+};
+
+#define PROTO_NONE	"none"
+
+/**
+ * show_protocols() - shows the current IR protocol(s)
+ * @device:	the device descriptor
+ * @mattr:	the device attribute struct (unused)
+ * @buf:	a pointer to the output buffer
+ *
+ * This routine is a callback routine for input read the IR protocol type(s).
+ * it is trigged by reading /sys/class/rc/rc?/protocols.
+ * It returns the protocol names of supported protocols.
+ * Enabled protocols are printed in brackets.
+ */
+static ssize_t show_protocols(struct device *device,
+			      struct device_attribute *mattr, char *buf)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+	u64 allowed, enabled;
+	char *tmp = buf;
+	int i;
+
+	/* Device is being removed */
+	if (!dev)
+		return -EINVAL;
+
+	if (dev->driver_type == RC_DRIVER_SCANCODE) {
+		enabled = dev->rc_map.rc_type;
+		allowed = dev->allowed_protos;
+	} else {
+		enabled = dev->raw->enabled_protocols;
+		allowed = ir_raw_get_allowed_protocols();
+	}
+
+	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
+		   (long long)allowed,
+		   (long long)enabled);
+
+	for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+		if (allowed & enabled & proto_names[i].type)
+			tmp += sprintf(tmp, "[%s] ", proto_names[i].name);
+		else if (allowed & proto_names[i].type)
+			tmp += sprintf(tmp, "%s ", proto_names[i].name);
+	}
+
+	if (tmp != buf)
+		tmp--;
+	*tmp = '\n';
+	return tmp + 1 - buf;
+}
+
+/**
+ * store_protocols() - changes the current IR protocol(s)
+ * @device:	the device descriptor
+ * @mattr:	the device attribute struct (unused)
+ * @buf:	a pointer to the input buffer
+ * @len:	length of the input buffer
+ *
+ * This routine is for changing the IR protocol type.
+ * It is trigged by writing to /sys/class/rc/rc?/protocols.
+ * Writing "+proto" will add a protocol to the list of enabled protocols.
+ * Writing "-proto" will remove a protocol from the list of enabled protocols.
+ * Writing "proto" will enable only "proto".
+ * Writing "none" will disable all protocols.
+ * Returns -EINVAL if an invalid protocol combination or unknown protocol name
+ * is used, otherwise @len.
+ */
+static ssize_t store_protocols(struct device *device,
+			       struct device_attribute *mattr,
+			       const char *data,
+			       size_t len)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+	bool enable, disable;
+	const char *tmp;
+	u64 type;
+	u64 mask;
+	int rc, i, count = 0;
+	unsigned long flags;
+
+	/* Device is being removed */
+	if (!dev)
+		return -EINVAL;
+
+	if (dev->driver_type == RC_DRIVER_SCANCODE)
+		type = dev->rc_map.rc_type;
+	else if (dev->raw)
+		type = dev->raw->enabled_protocols;
+	else {
+		IR_dprintk(1, "Protocol switching not supported\n");
+		return -EINVAL;
+	}
+
+	while ((tmp = strsep((char **) &data, " \n")) != NULL) {
+		if (!*tmp)
+			break;
+
+		if (*tmp == '+') {
+			enable = true;
+			disable = false;
+			tmp++;
+		} else if (*tmp == '-') {
+			enable = false;
+			disable = true;
+			tmp++;
+		} else {
+			enable = false;
+			disable = false;
+		}
+
+		if (!enable && !disable && !strncasecmp(tmp, PROTO_NONE, sizeof(PROTO_NONE))) {
+			tmp += sizeof(PROTO_NONE);
+			mask = 0;
+			count++;
+		} else {
+			for (i = 0; i < ARRAY_SIZE(proto_names); i++) {
+				if (!strncasecmp(tmp, proto_names[i].name, strlen(proto_names[i].name))) {
+					tmp += strlen(proto_names[i].name);
+					mask = proto_names[i].type;
+					break;
+				}
+			}
+			if (i == ARRAY_SIZE(proto_names)) {
+				IR_dprintk(1, "Unknown protocol: '%s'\n", tmp);
+				return -EINVAL;
+			}
+			count++;
+		}
+
+		if (enable)
+			type |= mask;
+		else if (disable)
+			type &= ~mask;
+		else
+			type = mask;
+	}
+
+	if (!count) {
+		IR_dprintk(1, "Protocol not specified\n");
+		return -EINVAL;
+	}
+
+	if (dev->change_protocol) {
+		rc = dev->change_protocol(dev, type);
+		if (rc < 0) {
+			IR_dprintk(1, "Error setting protocols to 0x%llx\n",
+				   (long long)type);
+			return -EINVAL;
+		}
+	}
+
+	if (dev->driver_type == RC_DRIVER_SCANCODE) {
+		spin_lock_irqsave(&dev->rc_map.lock, flags);
+		dev->rc_map.rc_type = type;
+		spin_unlock_irqrestore(&dev->rc_map.lock, flags);
+	} else {
+		dev->raw->enabled_protocols = type;
+	}
+
+	IR_dprintk(1, "Current protocol(s): 0x%llx\n",
+		   (long long)type);
+
+	return len;
+}
+
+static void rc_dev_release(struct device *device)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+
+	kfree(dev);
+	module_put(THIS_MODULE);
+}
+
+#define ADD_HOTPLUG_VAR(fmt, val...)					\
+	do {								\
+		int err = add_uevent_var(env, fmt, val);		\
+		if (err)						\
+			return err;					\
+	} while (0)
+
+static int rc_dev_uevent(struct device *device, struct kobj_uevent_env *env)
+{
+	struct rc_dev *dev = to_rc_dev(device);
+
+	if (dev->rc_map.name)
+		ADD_HOTPLUG_VAR("NAME=%s", dev->rc_map.name);
+	if (dev->driver_name)
+		ADD_HOTPLUG_VAR("DRV_NAME=%s", dev->driver_name);
+
+	return 0;
+}
+
+/*
+ * Static device attribute struct with the sysfs attributes for IR's
+ */
+static DEVICE_ATTR(protocols, S_IRUGO | S_IWUSR,
+		   show_protocols, store_protocols);
+
+static struct attribute *rc_dev_attrs[] = {
+	&dev_attr_protocols.attr,
+	NULL,
+};
+
+static struct attribute_group rc_dev_attr_grp = {
+	.attrs	= rc_dev_attrs,
+};
+
+static const struct attribute_group *rc_dev_attr_groups[] = {
+	&rc_dev_attr_grp,
+	NULL
+};
+
+static struct device_type rc_dev_type = {
+	.groups		= rc_dev_attr_groups,
+	.release	= rc_dev_release,
+	.uevent		= rc_dev_uevent,
+};
+
+struct rc_dev *rc_allocate_device(void)
+{
+	struct rc_dev *dev;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	dev->input_dev = input_allocate_device();
+	if (!dev->input_dev) {
+		kfree(dev);
+		return NULL;
+	}
+
+	dev->input_dev->getkeycode_new = ir_getkeycode;
+	dev->input_dev->setkeycode_new = ir_setkeycode;
+	input_set_drvdata(dev->input_dev, dev);
+
+	spin_lock_init(&dev->rc_map.lock);
+	spin_lock_init(&dev->keylock);
+	setup_timer(&dev->timer_keyup, ir_timer_keyup, (unsigned long)dev);
+
+	dev->dev.type = &rc_dev_type;
+	dev->dev.class = &ir_input_class;
+	device_initialize(&dev->dev);
+
+	__module_get(THIS_MODULE);
+	return dev;
+}
+EXPORT_SYMBOL_GPL(rc_allocate_device);
+
+void rc_free_device(struct rc_dev *dev)
+{
+	if (dev) {
+		input_free_device(dev->input_dev);
+		put_device(&dev->dev);
+	}
+}
+EXPORT_SYMBOL_GPL(rc_free_device);
+
+int rc_register_device(struct rc_dev *dev)
+{
+	static atomic_t devno = ATOMIC_INIT(0);
+	struct rc_map *rc_map;
+	const char *path;
+	int rc;
+
+	if (!dev || !dev->map_name)
+		return -EINVAL;
+
+	rc_map = rc_map_get(dev->map_name);
+	if (!rc_map)
+		rc_map = rc_map_get(RC_MAP_EMPTY);
+	if (!rc_map || !rc_map->scan || rc_map->size == 0)
+		return -EINVAL;
+
+	set_bit(EV_KEY, dev->input_dev->evbit);
+	set_bit(EV_REP, dev->input_dev->evbit);
+	set_bit(EV_MSC, dev->input_dev->evbit);
+	set_bit(MSC_SCAN, dev->input_dev->mscbit);
+	if (dev->open)
+		dev->input_dev->open = ir_open;
+	if (dev->close)
+		dev->input_dev->close = ir_close;
+
+	dev->devno = (unsigned long)(atomic_inc_return(&devno) - 1);
+	dev_set_name(&dev->dev, "rc%ld", dev->devno);
+	dev_set_drvdata(&dev->dev, dev);
+	rc = device_add(&dev->dev);
+	if (rc)
+		return rc;
+
+	rc = ir_setkeytable(dev, rc_map);
+	if (rc)
+		goto out_dev;
+
+	dev->input_dev->dev.parent = &dev->dev;
+	memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
+	dev->input_dev->phys = dev->input_phys;
+	dev->input_dev->name = dev->input_name;
+	rc = input_register_device(dev->input_dev);
+	if (rc)
+		goto out_table;
+
+	/*
+	 * Default delay of 250ms is too short for some protocols, expecially
+	 * since the timeout is currently set to 250ms. Increase it to 500ms,
+	 * to avoid wrong repetition of the keycodes. Note that this must be
+	 * set after the call to input_register_device().
+	 */
+	dev->input_dev->rep[REP_DELAY] = 500;
+
+	path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
+	printk(KERN_INFO "%s: %s as %s\n",
+		dev_name(&dev->dev),
+		dev->input_name ? dev->input_name : "Unspecified device",
+		path ? path : "N/A");
+	kfree(path);
+
+	if (dev->driver_type == RC_DRIVER_IR_RAW) {
+		rc = ir_raw_event_register(dev);
+		if (rc < 0)
+			goto out_input;
+	}
+
+	if (dev->change_protocol) {
+		rc = dev->change_protocol(dev, rc_map->rc_type);
+		if (rc < 0)
+			goto out_raw;
+	}
+
+	IR_dprintk(1, "Registered rc%ld (driver: %s, remote: %s, mode %s)\n",
+		   dev->devno,
+		   dev->driver_name ? dev->driver_name : "unknown",
+		   rc_map->name ? rc_map->name : "unknown",
+		   dev->driver_type == RC_DRIVER_IR_RAW ? "raw" : "cooked");
+
+	return 0;
+
+out_raw:
+	if (dev->driver_type == RC_DRIVER_IR_RAW)
+		ir_raw_event_unregister(dev);
+out_input:
+	input_unregister_device(dev->input_dev);
+	dev->input_dev = NULL;
+out_table:
+	ir_free_table(&dev->rc_map);
+out_dev:
+	device_del(&dev->dev);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(rc_register_device);
+
+void rc_unregister_device(struct rc_dev *dev)
+{
+	if (!dev)
+		return;
+
+	del_timer_sync(&dev->timer_keyup);
+
+	if (dev->driver_type == RC_DRIVER_IR_RAW)
+		ir_raw_event_unregister(dev);
+
+	input_unregister_device(dev->input_dev);
+	dev->input_dev = NULL;
+
+	ir_free_table(&dev->rc_map);
+	IR_dprintk(1, "Freed keycode table\n");
+
+	device_unregister(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(rc_unregister_device);
+
+/*
+ * Init/exit code for the module. Basically, creates/removes /sys/class/rc
+ */
+
+static int __init rc_core_init(void)
+{
+	int rc = class_register(&ir_input_class);
+	if (rc) {
+		printk(KERN_ERR "rc_core: unable to register rc class\n");
+		return rc;
+	}
+
+	/* Initialize/load the decoders/keymap code that will be used */
+	ir_raw_init();
+	rc_map_register(&empty_map);
+
+	return 0;
+}
+
+static void __exit rc_core_exit(void)
+{
+	class_unregister(&ir_input_class);
+	rc_map_unregister(&empty_map);
+}
+
+module_init(rc_core_init);
+module_exit(rc_core_exit);
+
+int rc_core_debug;    /* ir_debug level (0,1,2) */
+EXPORT_SYMBOL_GPL(rc_core_debug);
+module_param_named(debug, rc_core_debug, int, 0644);
+
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/IR/streamzap.c b/drivers/media/rc/streamzap.c
index 548381c35bf..6e2911c2abf 100644
--- a/drivers/media/IR/streamzap.c
+++ b/drivers/media/rc/streamzap.c
@@ -35,8 +35,8 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/usb.h>
-#include <linux/input.h>
-#include <media/ir-core.h>
+#include <linux/usb/input.h>
+#include <media/rc-core.h>
 
 #define DRIVER_VERSION	"1.61"
 #define DRIVER_NAME	"streamzap"
@@ -73,7 +73,7 @@ MODULE_DEVICE_TABLE(usb, streamzap_table);
 #ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
 #define load_rc5_sz_decode()    request_module("ir-rc5-sz-decoder")
 #else
-#define load_rc5_sz_decode()    0
+#define load_rc5_sz_decode()    {}
 #endif
 
 enum StreamzapDecoderState {
@@ -85,13 +85,11 @@ enum StreamzapDecoderState {
 
 /* structure to hold our device specific stuff */
 struct streamzap_ir {
-
 	/* ir-core */
-	struct ir_dev_props *props;
+	struct rc_dev *rdev;
 
 	/* core device info */
 	struct device *dev;
-	struct input_dev *idev;
 
 	/* usb */
 	struct usb_device	*usbdev;
@@ -140,7 +138,9 @@ static struct usb_driver streamzap_driver = {
 
 static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
 {
-	ir_raw_event_store(sz->idev, &rawir);
+	dev_dbg(sz->dev, "Storing %s with duration %u us\n",
+		(rawir.pulse ? "pulse" : "space"), rawir.duration);
+	ir_raw_event_store_with_filter(sz->rdev, &rawir);
 }
 
 static void sz_push_full_pulse(struct streamzap_ir *sz,
@@ -167,7 +167,6 @@ static void sz_push_full_pulse(struct streamzap_ir *sz,
 			rawir.duration *= 1000;
 			rawir.duration &= IR_MAX_DURATION;
 		}
-		dev_dbg(sz->dev, "ls %u\n", rawir.duration);
 		sz_push(sz, rawir);
 
 		sz->idle = false;
@@ -180,7 +179,6 @@ static void sz_push_full_pulse(struct streamzap_ir *sz,
 	sz->sum += rawir.duration;
 	rawir.duration *= 1000;
 	rawir.duration &= IR_MAX_DURATION;
-	dev_dbg(sz->dev, "p %u\n", rawir.duration);
 	sz_push(sz, rawir);
 }
 
@@ -200,7 +198,6 @@ static void sz_push_full_space(struct streamzap_ir *sz,
 	rawir.duration += SZ_RESOLUTION / 2;
 	sz->sum += rawir.duration;
 	rawir.duration *= 1000;
-	dev_dbg(sz->dev, "s %u\n", rawir.duration);
 	sz_push(sz, rawir);
 }
 
@@ -221,8 +218,6 @@ static void streamzap_callback(struct urb *urb)
 	struct streamzap_ir *sz;
 	unsigned int i;
 	int len;
-	static int timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
-				IR_MAX_DURATION) | 0x03000000);
 
 	if (!urb)
 		return;
@@ -246,7 +241,7 @@ static void streamzap_callback(struct urb *urb)
 
 	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
 	for (i = 0; i < len; i++) {
-		dev_dbg(sz->dev, "sz idx %d: %x\n",
+		dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
 			i, (unsigned char)sz->buf_in[i]);
 		switch (sz->decoder_state) {
 		case PulseSpace:
@@ -273,11 +268,11 @@ static void streamzap_callback(struct urb *urb)
 				DEFINE_IR_RAW_EVENT(rawir);
 
 				rawir.pulse = false;
-				rawir.duration = timeout;
+				rawir.duration = sz->rdev->timeout;
 				sz->idle = true;
 				if (sz->timeout_enabled)
 					sz_push(sz, rawir);
-				ir_raw_event_handle(sz->idev);
+				ir_raw_event_handle(sz->rdev);
 			} else {
 				sz_push_full_space(sz, sz->buf_in[i]);
 			}
@@ -300,54 +295,45 @@ static void streamzap_callback(struct urb *urb)
 	return;
 }
 
-static struct input_dev *streamzap_init_input_dev(struct streamzap_ir *sz)
+static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
 {
-	struct input_dev *idev;
-	struct ir_dev_props *props;
+	struct rc_dev *rdev;
 	struct device *dev = sz->dev;
 	int ret;
 
-	idev = input_allocate_device();
-	if (!idev) {
-		dev_err(dev, "remote input dev allocation failed\n");
-		goto idev_alloc_failed;
-	}
-
-	props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL);
-	if (!props) {
-		dev_err(dev, "remote ir dev props allocation failed\n");
-		goto props_alloc_failed;
+	rdev = rc_allocate_device();
+	if (!rdev) {
+		dev_err(dev, "remote dev allocation failed\n");
+		goto out;
 	}
 
 	snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
 		 "Receiver (%04x:%04x)",
 		 le16_to_cpu(sz->usbdev->descriptor.idVendor),
 		 le16_to_cpu(sz->usbdev->descriptor.idProduct));
-
-	idev->name = sz->name;
 	usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
 	strlcat(sz->phys, "/input0", sizeof(sz->phys));
-	idev->phys = sz->phys;
-
-	props->priv = sz;
-	props->driver_type = RC_DRIVER_IR_RAW;
-	props->allowed_protos = IR_TYPE_ALL;
 
-	sz->props = props;
-
-	ret = ir_input_register(idev, RC_MAP_STREAMZAP, props, DRIVER_NAME);
+	rdev->input_name = sz->name;
+	rdev->input_phys = sz->phys;
+	usb_to_input_id(sz->usbdev, &rdev->input_id);
+	rdev->dev.parent = dev;
+	rdev->priv = sz;
+	rdev->driver_type = RC_DRIVER_IR_RAW;
+	rdev->allowed_protos = RC_TYPE_ALL;
+	rdev->driver_name = DRIVER_NAME;
+	rdev->map_name = RC_MAP_STREAMZAP;
+
+	ret = rc_register_device(rdev);
 	if (ret < 0) {
 		dev_err(dev, "remote input device register failed\n");
-		goto irdev_failed;
+		goto out;
 	}
 
-	return idev;
+	return rdev;
 
-irdev_failed:
-	kfree(props);
-props_alloc_failed:
-	input_free_device(idev);
-idev_alloc_failed:
+out:
+	rc_free_device(rdev);
 	return NULL;
 }
 
@@ -436,14 +422,16 @@ static int __devinit streamzap_probe(struct usb_interface *intf,
 		snprintf(name + strlen(name), sizeof(name) - strlen(name),
 			 " %s", buf);
 
-	sz->idev = streamzap_init_input_dev(sz);
-	if (!sz->idev)
-		goto input_dev_fail;
+	sz->rdev = streamzap_init_rc_dev(sz);
+	if (!sz->rdev)
+		goto rc_dev_fail;
 
 	sz->idle = true;
 	sz->decoder_state = PulseSpace;
 	/* FIXME: don't yet have a way to set this */
 	sz->timeout_enabled = true;
+	sz->rdev->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) &
+				IR_MAX_DURATION) | 0x03000000);
 	#if 0
 	/* not yet supported, depends on patches from maxim */
 	/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
@@ -473,7 +461,7 @@ static int __devinit streamzap_probe(struct usb_interface *intf,
 
 	return 0;
 
-input_dev_fail:
+rc_dev_fail:
 	usb_free_urb(sz->urb_in);
 free_buf_in:
 	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
@@ -504,7 +492,7 @@ static void streamzap_disconnect(struct usb_interface *interface)
 		return;
 
 	sz->usbdev = NULL;
-	ir_input_unregister(sz->idev);
+	rc_unregister_device(sz->rdev);
 	usb_kill_urb(sz->urb_in);
 	usb_free_urb(sz->urb_in);
 	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
diff --git a/drivers/input/misc/winbond-cir.c b/drivers/media/rc/winbond-cir.c
index 64f1de7960c..186de552200 100644
--- a/drivers/input/misc/winbond-cir.c
+++ b/drivers/media/rc/winbond-cir.c
@@ -7,10 +7,10 @@
  *  with minor modifications.
  *
  *  Original Author: David Härdeman <david@hardeman.nu>
- *     Copyright (C) 2009 David Härdeman <david@hardeman.nu>
+ *     Copyright (C) 2009 - 2010 David Härdeman <david@hardeman.nu>
  *
- *  Dedicated to Matilda, my newborn daughter, without whose loving attention
- *  this driver would have been finished in half the time and with a fraction
+ *  Dedicated to my daughter Matilda, without whose loving attention this
+ *  driver would have been finished in half the time and with a fraction
  *  of the bugs.
  *
  *  Written using:
@@ -19,15 +19,11 @@
  *    o DSDT dumps
  *
  *  Supported features:
- *    o RC6
  *    o Wake-On-CIR functionality
  *
  *  To do:
- *    o Test NEC and RC5
- *
- *  Left as an exercise for the reader:
- *    o Learning (I have neither the hardware, nor the need)
- *    o IR Transmit (ibid)
+ *    o Learning
+ *    o IR Transmit
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -48,15 +44,13 @@
 #include <linux/pnp.h>
 #include <linux/interrupt.h>
 #include <linux/timer.h>
-#include <linux/input.h>
 #include <linux/leds.h>
-#include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/pci_ids.h>
 #include <linux/io.h>
 #include <linux/bitrev.h>
-#include <linux/bitops.h>
 #include <linux/slab.h>
+#include <media/rc-core.h>
 
 #define DRVNAME "winbond-cir"
 
@@ -108,7 +102,7 @@
 #define WBCIR_REG_SP3_IRCR2	0x04 /* Infrared Control 2		*/
 				      /* Bank 6				*/
 #define WBCIR_REG_SP3_IRCR3	0x00 /* Infrared Control 3		*/
-#define WBCIR_REG_SP3_SIR_PW	0x02 /* SIR Pulse Width		*/
+#define WBCIR_REG_SP3_SIR_PW	0x02 /* SIR Pulse Width			*/
 				      /* Bank 7				*/
 #define WBCIR_REG_SP3_IRRXDC	0x00 /* IR RX Demod Control		*/
 #define WBCIR_REG_SP3_IRTXMC	0x01 /* IR TX Mod Control		*/
@@ -153,7 +147,7 @@ enum wbcir_bank {
 	WBCIR_BANK_7          = 0xF4,
 };
 
-/* Supported IR Protocols */
+/* Supported power-on IR Protocols */
 enum wbcir_protocol {
 	IR_PROTOCOL_RC5          = 0x0,
 	IR_PROTOCOL_NEC          = 0x1,
@@ -164,113 +158,35 @@ enum wbcir_protocol {
 #define WBCIR_NAME	"Winbond CIR"
 #define WBCIR_ID_FAMILY          0xF1 /* Family ID for the WPCD376I	*/
 #define	WBCIR_ID_CHIP            0x04 /* Chip ID for the WPCD376I	*/
-#define IR_KEYPRESS_TIMEOUT       250 /* FIXME: should be per-protocol? */
 #define INVALID_SCANCODE   0x7FFFFFFF /* Invalid with all protos	*/
 #define WAKEUP_IOMEM_LEN         0x10 /* Wake-Up I/O Reg Len		*/
 #define EHFUNC_IOMEM_LEN         0x10 /* Enhanced Func I/O Reg Len	*/
 #define SP_IOMEM_LEN             0x08 /* Serial Port 3 (IR) Reg Len	*/
-#define WBCIR_MAX_IDLE_BYTES       10
-
-static DEFINE_SPINLOCK(wbcir_lock);
-static DEFINE_RWLOCK(keytable_lock);
 
-struct wbcir_key {
-	u32 scancode;
-	unsigned int keycode;
-};
-
-struct wbcir_keyentry {
-	struct wbcir_key key;
-	struct list_head list;
-};
-
-static struct wbcir_key rc6_def_keymap[] = {
-	{ 0x800F0400, KEY_NUMERIC_0		},
-	{ 0x800F0401, KEY_NUMERIC_1		},
-	{ 0x800F0402, KEY_NUMERIC_2		},
-	{ 0x800F0403, KEY_NUMERIC_3		},
-	{ 0x800F0404, KEY_NUMERIC_4		},
-	{ 0x800F0405, KEY_NUMERIC_5		},
-	{ 0x800F0406, KEY_NUMERIC_6		},
-	{ 0x800F0407, KEY_NUMERIC_7		},
-	{ 0x800F0408, KEY_NUMERIC_8		},
-	{ 0x800F0409, KEY_NUMERIC_9		},
-	{ 0x800F041D, KEY_NUMERIC_STAR		},
-	{ 0x800F041C, KEY_NUMERIC_POUND		},
-	{ 0x800F0410, KEY_VOLUMEUP		},
-	{ 0x800F0411, KEY_VOLUMEDOWN		},
-	{ 0x800F0412, KEY_CHANNELUP		},
-	{ 0x800F0413, KEY_CHANNELDOWN		},
-	{ 0x800F040E, KEY_MUTE			},
-	{ 0x800F040D, KEY_VENDOR		}, /* Vista Logo Key */
-	{ 0x800F041E, KEY_UP			},
-	{ 0x800F041F, KEY_DOWN			},
-	{ 0x800F0420, KEY_LEFT			},
-	{ 0x800F0421, KEY_RIGHT			},
-	{ 0x800F0422, KEY_OK			},
-	{ 0x800F0423, KEY_ESC			},
-	{ 0x800F040F, KEY_INFO			},
-	{ 0x800F040A, KEY_CLEAR			},
-	{ 0x800F040B, KEY_ENTER			},
-	{ 0x800F045B, KEY_RED			},
-	{ 0x800F045C, KEY_GREEN			},
-	{ 0x800F045D, KEY_YELLOW		},
-	{ 0x800F045E, KEY_BLUE			},
-	{ 0x800F045A, KEY_TEXT			},
-	{ 0x800F0427, KEY_SWITCHVIDEOMODE	},
-	{ 0x800F040C, KEY_POWER			},
-	{ 0x800F0450, KEY_RADIO			},
-	{ 0x800F0448, KEY_PVR			},
-	{ 0x800F0447, KEY_AUDIO			},
-	{ 0x800F0426, KEY_EPG			},
-	{ 0x800F0449, KEY_CAMERA		},
-	{ 0x800F0425, KEY_TV			},
-	{ 0x800F044A, KEY_VIDEO			},
-	{ 0x800F0424, KEY_DVD			},
-	{ 0x800F0416, KEY_PLAY			},
-	{ 0x800F0418, KEY_PAUSE			},
-	{ 0x800F0419, KEY_STOP			},
-	{ 0x800F0414, KEY_FASTFORWARD		},
-	{ 0x800F041A, KEY_NEXT			},
-	{ 0x800F041B, KEY_PREVIOUS		},
-	{ 0x800F0415, KEY_REWIND		},
-	{ 0x800F0417, KEY_RECORD		},
-};
-
-/* Registers and other state is protected by wbcir_lock */
+/* Per-device data */
 struct wbcir_data {
+	spinlock_t spinlock;
+
 	unsigned long wbase;        /* Wake-Up Baseaddr		*/
 	unsigned long ebase;        /* Enhanced Func. Baseaddr	*/
 	unsigned long sbase;        /* Serial Port Baseaddr	*/
 	unsigned int  irq;          /* Serial Port IRQ		*/
 
-	struct input_dev *input_dev;
-	struct timer_list timer_keyup;
+	struct rc_dev *dev;
+
 	struct led_trigger *rxtrigger;
 	struct led_trigger *txtrigger;
 	struct led_classdev led;
 
-	u32 last_scancode;
-	unsigned int last_keycode;
-	u8 last_toggle;
-	u8 keypressed;
-	unsigned long keyup_jiffies;
-	unsigned int idle_count;
-
-	/* RX irdata and parsing state */
-	unsigned long irdata[30];
-	unsigned int irdata_count;
-	unsigned int irdata_idle;
-	unsigned int irdata_off;
-	unsigned int irdata_error;
-
-	/* Protected by keytable_lock */
-	struct list_head keytable;
+	/* RX irdata state */
+	bool irdata_active;
+	bool irdata_error;
+	struct ir_raw_event ev;
 };
 
 static enum wbcir_protocol protocol = IR_PROTOCOL_RC6;
 module_param(protocol, uint, 0444);
-MODULE_PARM_DESC(protocol, "IR protocol to use "
+MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command "
 		 "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
 
 static int invert; /* default = 0 */
@@ -327,7 +243,7 @@ wbcir_led_brightness_get(struct led_classdev *led_cdev)
 
 static void
 wbcir_led_brightness_set(struct led_classdev *led_cdev,
-			    enum led_brightness brightness)
+			 enum led_brightness brightness)
 {
 	struct wbcir_data *data = container_of(led_cdev,
 					       struct wbcir_data,
@@ -338,7 +254,7 @@ wbcir_led_brightness_set(struct led_classdev *led_cdev,
 		       WBCIR_LED_ENABLE);
 }
 
-/* Manchester encodes bits to RC6 message cells (see wbcir_parse_rc6) */
+/* Manchester encodes bits to RC6 message cells (see wbcir_shutdown) */
 static u8
 wbcir_to_rc6cells(u8 val)
 {
@@ -357,579 +273,6 @@ wbcir_to_rc6cells(u8 val)
 	return coded;
 }
 
-
-
-/*****************************************************************************
- *
- * INPUT FUNCTIONS
- *
- *****************************************************************************/
-
-static unsigned int
-wbcir_do_getkeycode(struct wbcir_data *data, u32 scancode)
-{
-	struct wbcir_keyentry *keyentry;
-	unsigned int keycode = KEY_RESERVED;
-	unsigned long flags;
-
-	read_lock_irqsave(&keytable_lock, flags);
-
-	list_for_each_entry(keyentry, &data->keytable, list) {
-		if (keyentry->key.scancode == scancode) {
-			keycode = keyentry->key.keycode;
-			break;
-		}
-	}
-
-	read_unlock_irqrestore(&keytable_lock, flags);
-	return keycode;
-}
-
-static int
-wbcir_getkeycode(struct input_dev *dev,
-		 unsigned int scancode, unsigned int *keycode)
-{
-	struct wbcir_data *data = input_get_drvdata(dev);
-
-	*keycode = wbcir_do_getkeycode(data, scancode);
-	return 0;
-}
-
-static int
-wbcir_setkeycode(struct input_dev *dev,
-		 unsigned int scancode, unsigned int keycode)
-{
-	struct wbcir_data *data = input_get_drvdata(dev);
-	struct wbcir_keyentry *keyentry;
-	struct wbcir_keyentry *new_keyentry;
-	unsigned long flags;
-	unsigned int old_keycode = KEY_RESERVED;
-
-	new_keyentry = kmalloc(sizeof(*new_keyentry), GFP_KERNEL);
-	if (!new_keyentry)
-		return -ENOMEM;
-
-	write_lock_irqsave(&keytable_lock, flags);
-
-	list_for_each_entry(keyentry, &data->keytable, list) {
-		if (keyentry->key.scancode != scancode)
-			continue;
-
-		old_keycode = keyentry->key.keycode;
-		keyentry->key.keycode = keycode;
-
-		if (keyentry->key.keycode == KEY_RESERVED) {
-			list_del(&keyentry->list);
-			kfree(keyentry);
-		}
-
-		break;
-	}
-
-	set_bit(keycode, dev->keybit);
-
-	if (old_keycode == KEY_RESERVED) {
-		new_keyentry->key.scancode = scancode;
-		new_keyentry->key.keycode = keycode;
-		list_add(&new_keyentry->list, &data->keytable);
-	} else {
-		kfree(new_keyentry);
-		clear_bit(old_keycode, dev->keybit);
-		list_for_each_entry(keyentry, &data->keytable, list) {
-			if (keyentry->key.keycode == old_keycode) {
-				set_bit(old_keycode, dev->keybit);
-				break;
-			}
-		}
-	}
-
-	write_unlock_irqrestore(&keytable_lock, flags);
-	return 0;
-}
-
-/*
- * Timer function to report keyup event some time after keydown is
- * reported by the ISR.
- */
-static void
-wbcir_keyup(unsigned long cookie)
-{
-	struct wbcir_data *data = (struct wbcir_data *)cookie;
-	unsigned long flags;
-
-	/*
-	 * data->keyup_jiffies is used to prevent a race condition if a
-	 * hardware interrupt occurs at this point and the keyup timer
-	 * event is moved further into the future as a result.
-	 *
-	 * The timer will then be reactivated and this function called
-	 * again in the future. We need to exit gracefully in that case
-	 * to allow the input subsystem to do its auto-repeat magic or
-	 * a keyup event might follow immediately after the keydown.
-	 */
-
-	spin_lock_irqsave(&wbcir_lock, flags);
-
-	if (time_is_after_eq_jiffies(data->keyup_jiffies) && data->keypressed) {
-		data->keypressed = 0;
-		led_trigger_event(data->rxtrigger, LED_OFF);
-		input_report_key(data->input_dev, data->last_keycode, 0);
-		input_sync(data->input_dev);
-	}
-
-	spin_unlock_irqrestore(&wbcir_lock, flags);
-}
-
-static void
-wbcir_keydown(struct wbcir_data *data, u32 scancode, u8 toggle)
-{
-	unsigned int keycode;
-
-	/* Repeat? */
-	if (data->last_scancode == scancode &&
-	    data->last_toggle == toggle &&
-	    data->keypressed)
-		goto set_timer;
-	data->last_scancode = scancode;
-
-	/* Do we need to release an old keypress? */
-	if (data->keypressed) {
-		input_report_key(data->input_dev, data->last_keycode, 0);
-		input_sync(data->input_dev);
-		data->keypressed = 0;
-	}
-
-	/* Report scancode */
-	input_event(data->input_dev, EV_MSC, MSC_SCAN, (int)scancode);
-
-	/* Do we know this scancode? */
-	keycode = wbcir_do_getkeycode(data, scancode);
-	if (keycode == KEY_RESERVED)
-		goto set_timer;
-
-	/* Register a keypress */
-	input_report_key(data->input_dev, keycode, 1);
-	data->keypressed = 1;
-	data->last_keycode = keycode;
-	data->last_toggle = toggle;
-
-set_timer:
-	input_sync(data->input_dev);
-	led_trigger_event(data->rxtrigger,
-			  data->keypressed ? LED_FULL : LED_OFF);
-	data->keyup_jiffies = jiffies + msecs_to_jiffies(IR_KEYPRESS_TIMEOUT);
-	mod_timer(&data->timer_keyup, data->keyup_jiffies);
-}
-
-
-
-/*****************************************************************************
- *
- * IR PARSING FUNCTIONS
- *
- *****************************************************************************/
-
-/* Resets all irdata */
-static void
-wbcir_reset_irdata(struct wbcir_data *data)
-{
-	memset(data->irdata, 0, sizeof(data->irdata));
-	data->irdata_count = 0;
-	data->irdata_off = 0;
-	data->irdata_error = 0;
-	data->idle_count = 0;
-}
-
-/* Adds one bit of irdata */
-static void
-add_irdata_bit(struct wbcir_data *data, int set)
-{
-	if (data->irdata_count >= sizeof(data->irdata) * 8) {
-		data->irdata_error = 1;
-		return;
-	}
-
-	if (set)
-		__set_bit(data->irdata_count, data->irdata);
-	data->irdata_count++;
-}
-
-/* Gets count bits of irdata */
-static u16
-get_bits(struct wbcir_data *data, int count)
-{
-	u16 val = 0x0;
-
-	if (data->irdata_count - data->irdata_off < count) {
-		data->irdata_error = 1;
-		return 0x0;
-	}
-
-	while (count > 0) {
-		val <<= 1;
-		if (test_bit(data->irdata_off, data->irdata))
-			val |= 0x1;
-		count--;
-		data->irdata_off++;
-	}
-
-	return val;
-}
-
-/* Reads 16 cells and converts them to a byte */
-static u8
-wbcir_rc6cells_to_byte(struct wbcir_data *data)
-{
-	u16 raw = get_bits(data, 16);
-	u8 val = 0x00;
-	int bit;
-
-	for (bit = 0; bit < 8; bit++) {
-		switch (raw & 0x03) {
-		case 0x01:
-			break;
-		case 0x02:
-			val |= (0x01 << bit);
-			break;
-		default:
-			data->irdata_error = 1;
-			break;
-		}
-		raw >>= 2;
-	}
-
-	return val;
-}
-
-/* Decodes a number of bits from raw RC5 data */
-static u8
-wbcir_get_rc5bits(struct wbcir_data *data, unsigned int count)
-{
-	u16 raw = get_bits(data, count * 2);
-	u8 val = 0x00;
-	int bit;
-
-	for (bit = 0; bit < count; bit++) {
-		switch (raw & 0x03) {
-		case 0x01:
-			val |= (0x01 << bit);
-			break;
-		case 0x02:
-			break;
-		default:
-			data->irdata_error = 1;
-			break;
-		}
-		raw >>= 2;
-	}
-
-	return val;
-}
-
-static void
-wbcir_parse_rc6(struct device *dev, struct wbcir_data *data)
-{
-	/*
-	 * Normal bits are manchester coded as follows:
-	 * cell0 + cell1 = logic "0"
-	 * cell1 + cell0 = logic "1"
-	 *
-	 * The IR pulse has the following components:
-	 *
-	 * Leader		- 6 * cell1 - discarded
-	 * Gap    		- 2 * cell0 - discarded
-	 * Start bit		- Normal Coding - always "1"
-	 * Mode Bit 2 - 0	- Normal Coding
-	 * Toggle bit		- Normal Coding with double bit time,
-	 *			  e.g. cell0 + cell0 + cell1 + cell1
-	 *			  means logic "0".
-	 *
-	 * The rest depends on the mode, the following modes are known:
-	 *
-	 * MODE 0:
-	 *  Address Bit 7 - 0	- Normal Coding
-	 *  Command Bit 7 - 0	- Normal Coding
-	 *
-	 * MODE 6:
-	 *  The above Toggle Bit is used as a submode bit, 0 = A, 1 = B.
-	 *  Submode B is for pointing devices, only remotes using submode A
-	 *  are supported.
-	 *
-	 *  Customer range bit	- 0 => Customer = 7 bits, 0...127
-	 *                        1 => Customer = 15 bits, 32768...65535
-	 *  Customer Bits	- Normal Coding
-	 *
-	 *  Customer codes are allocated by Philips. The rest of the bits
-	 *  are customer dependent. The following is commonly used (and the
-	 *  only supported config):
-	 *
-	 *  Toggle Bit		- Normal Coding
-	 *  Address Bit 6 - 0	- Normal Coding
-	 *  Command Bit 7 - 0	- Normal Coding
-	 *
-	 * All modes are followed by at least 6 * cell0.
-	 *
-	 * MODE 0 msglen:
-	 *  1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (toggle) +
-	 *  8 * 2 (address) + 8 * 2 (command) =
-	 *  44 cells
-	 *
-	 * MODE 6A msglen:
-	 *  1 * 2 (start bit) + 3 * 2 (mode) + 2 * 2 (submode) +
-	 *  1 * 2 (customer range bit) + 7/15 * 2 (customer bits) +
-	 *  1 * 2 (toggle bit) + 7 * 2 (address) + 8 * 2 (command) =
-	 *  60 - 76 cells
-	 */
-	u8 mode;
-	u8 toggle;
-	u16 customer = 0x0;
-	u8 address;
-	u8 command;
-	u32 scancode;
-
-	/* Leader mark */
-	while (get_bits(data, 1) && !data->irdata_error)
-		/* Do nothing */;
-
-	/* Leader space */
-	if (get_bits(data, 1)) {
-		dev_dbg(dev, "RC6 - Invalid leader space\n");
-		return;
-	}
-
-	/* Start bit */
-	if (get_bits(data, 2) != 0x02) {
-		dev_dbg(dev, "RC6 - Invalid start bit\n");
-		return;
-	}
-
-	/* Mode */
-	mode = get_bits(data, 6);
-	switch (mode) {
-	case 0x15: /* 010101 = b000 */
-		mode = 0;
-		break;
-	case 0x29: /* 101001 = b110 */
-		mode = 6;
-		break;
-	default:
-		dev_dbg(dev, "RC6 - Invalid mode\n");
-		return;
-	}
-
-	/* Toggle bit / Submode bit */
-	toggle = get_bits(data, 4);
-	switch (toggle) {
-	case 0x03:
-		toggle = 0;
-		break;
-	case 0x0C:
-		toggle = 1;
-		break;
-	default:
-		dev_dbg(dev, "RC6 - Toggle bit error\n");
-		break;
-	}
-
-	/* Customer */
-	if (mode == 6) {
-		if (toggle != 0) {
-			dev_dbg(dev, "RC6B - Not Supported\n");
-			return;
-		}
-
-		customer = wbcir_rc6cells_to_byte(data);
-
-		if (customer & 0x80) {
-			/* 15 bit customer value */
-			customer <<= 8;
-			customer |= wbcir_rc6cells_to_byte(data);
-		}
-	}
-
-	/* Address */
-	address = wbcir_rc6cells_to_byte(data);
-	if (mode == 6) {
-		toggle = address >> 7;
-		address &= 0x7F;
-	}
-
-	/* Command */
-	command = wbcir_rc6cells_to_byte(data);
-
-	/* Create scancode */
-	scancode =  command;
-	scancode |= address << 8;
-	scancode |= customer << 16;
-
-	/* Last sanity check */
-	if (data->irdata_error) {
-		dev_dbg(dev, "RC6 - Cell error(s)\n");
-		return;
-	}
-
-	dev_dbg(dev, "IR-RC6 ad 0x%02X cm 0x%02X cu 0x%04X "
-		"toggle %u mode %u scan 0x%08X\n",
-		address,
-		command,
-		customer,
-		(unsigned int)toggle,
-		(unsigned int)mode,
-		scancode);
-
-	wbcir_keydown(data, scancode, toggle);
-}
-
-static void
-wbcir_parse_rc5(struct device *dev, struct wbcir_data *data)
-{
-	/*
-	 * Bits are manchester coded as follows:
-	 * cell1 + cell0 = logic "0"
-	 * cell0 + cell1 = logic "1"
-	 * (i.e. the reverse of RC6)
-	 *
-	 * Start bit 1		- "1" - discarded
-	 * Start bit 2		- Must be inverted to get command bit 6
-	 * Toggle bit
-	 * Address Bit 4 - 0
-	 * Command Bit 5 - 0
-	 */
-	u8 toggle;
-	u8 address;
-	u8 command;
-	u32 scancode;
-
-	/* Start bit 1 */
-	if (!get_bits(data, 1)) {
-		dev_dbg(dev, "RC5 - Invalid start bit\n");
-		return;
-	}
-
-	/* Start bit 2 */
-	if (!wbcir_get_rc5bits(data, 1))
-		command = 0x40;
-	else
-		command = 0x00;
-
-	toggle   = wbcir_get_rc5bits(data, 1);
-	address  = wbcir_get_rc5bits(data, 5);
-	command |= wbcir_get_rc5bits(data, 6);
-	scancode = address << 7 | command;
-
-	/* Last sanity check */
-	if (data->irdata_error) {
-		dev_dbg(dev, "RC5 - Invalid message\n");
-		return;
-	}
-
-	dev_dbg(dev, "IR-RC5 ad %u cm %u t %u s %u\n",
-		(unsigned int)address,
-		(unsigned int)command,
-		(unsigned int)toggle,
-		(unsigned int)scancode);
-
-	wbcir_keydown(data, scancode, toggle);
-}
-
-static void
-wbcir_parse_nec(struct device *dev, struct wbcir_data *data)
-{
-	/*
-	 * Each bit represents 560 us.
-	 *
-	 * Leader		- 9 ms burst
-	 * Gap			- 4.5 ms silence
-	 * Address1 bit 0 - 7	- Address 1
-	 * Address2 bit 0 - 7	- Address 2
-	 * Command1 bit 0 - 7	- Command 1
-	 * Command2 bit 0 - 7	- Command 2
-	 *
-	 * Note the bit order!
-	 *
-	 * With the old NEC protocol, Address2 was the inverse of Address1
-	 * and Command2 was the inverse of Command1 and were used as
-	 * an error check.
-	 *
-	 * With NEC extended, Address1 is the LSB of the Address and
-	 * Address2 is the MSB, Command parsing remains unchanged.
-	 *
-	 * A repeat message is coded as:
-	 * Leader		- 9 ms burst
-	 * Gap			- 2.25 ms silence
-	 * Repeat		- 560 us active
-	 */
-	u8 address1;
-	u8 address2;
-	u8 command1;
-	u8 command2;
-	u16 address;
-	u32 scancode;
-
-	/* Leader mark */
-	while (get_bits(data, 1) && !data->irdata_error)
-		/* Do nothing */;
-
-	/* Leader space */
-	if (get_bits(data, 4)) {
-		dev_dbg(dev, "NEC - Invalid leader space\n");
-		return;
-	}
-
-	/* Repeat? */
-	if (get_bits(data, 1)) {
-		if (!data->keypressed) {
-			dev_dbg(dev, "NEC - Stray repeat message\n");
-			return;
-		}
-
-		dev_dbg(dev, "IR-NEC repeat s %u\n",
-			(unsigned int)data->last_scancode);
-
-		wbcir_keydown(data, data->last_scancode, data->last_toggle);
-		return;
-	}
-
-	/* Remaining leader space */
-	if (get_bits(data, 3)) {
-		dev_dbg(dev, "NEC - Invalid leader space\n");
-		return;
-	}
-
-	address1  = bitrev8(get_bits(data, 8));
-	address2  = bitrev8(get_bits(data, 8));
-	command1  = bitrev8(get_bits(data, 8));
-	command2  = bitrev8(get_bits(data, 8));
-
-	/* Sanity check */
-	if (data->irdata_error) {
-		dev_dbg(dev, "NEC - Invalid message\n");
-		return;
-	}
-
-	/* Check command validity */
-	if (command1 != ~command2) {
-		dev_dbg(dev, "NEC - Command bytes mismatch\n");
-		return;
-	}
-
-	/* Check for extended NEC protocol */
-	address = address1;
-	if (address1 != ~address2)
-		address |= address2 << 8;
-
-	scancode = address << 8 | command1;
-
-	dev_dbg(dev, "IR-NEC ad %u cm %u s %u\n",
-		(unsigned int)address,
-		(unsigned int)command1,
-		(unsigned int)scancode);
-
-	wbcir_keydown(data, scancode, !data->last_toggle);
-}
-
-
-
 /*****************************************************************************
  *
  * INTERRUPT FUNCTIONS
@@ -941,75 +284,88 @@ wbcir_irq_handler(int irqno, void *cookie)
 {
 	struct pnp_dev *device = cookie;
 	struct wbcir_data *data = pnp_get_drvdata(device);
-	struct device *dev = &device->dev;
-	u8 status;
 	unsigned long flags;
 	u8 irdata[8];
+	u8 disable = true;
+	u8 status;
 	int i;
-	unsigned int hw;
 
-	spin_lock_irqsave(&wbcir_lock, flags);
+	spin_lock_irqsave(&data->spinlock, flags);
 
 	wbcir_select_bank(data, WBCIR_BANK_0);
 
 	status = inb(data->sbase + WBCIR_REG_SP3_EIR);
 
 	if (!(status & (WBCIR_IRQ_RX | WBCIR_IRQ_ERR))) {
-		spin_unlock_irqrestore(&wbcir_lock, flags);
+		spin_unlock_irqrestore(&data->spinlock, flags);
 		return IRQ_NONE;
 	}
 
-	if (status & WBCIR_IRQ_ERR)
-		data->irdata_error = 1;
+	/* Check for e.g. buffer overflow */
+	if (status & WBCIR_IRQ_ERR) {
+		data->irdata_error = true;
+		ir_raw_event_reset(data->dev);
+	}
 
 	if (!(status & WBCIR_IRQ_RX))
 		goto out;
 
+	if (!data->irdata_active) {
+		data->irdata_active = true;
+		led_trigger_event(data->rxtrigger, LED_FULL);
+	}
+
 	/* Since RXHDLEV is set, at least 8 bytes are in the FIFO */
 	insb(data->sbase + WBCIR_REG_SP3_RXDATA, &irdata[0], 8);
 
-	for (i = 0; i < sizeof(irdata); i++) {
-		hw = hweight8(irdata[i]);
-		if (hw > 4)
-			add_irdata_bit(data, 0);
-		else
-			add_irdata_bit(data, 1);
+	for (i = 0; i < 8; i++) {
+		u8 pulse;
+		u32 duration;
 
-		if (hw == 8)
-			data->idle_count++;
-		else
-			data->idle_count = 0;
+		if (irdata[i] != 0xFF && irdata[i] != 0x00)
+			disable = false;
+
+		if (data->irdata_error)
+			continue;
+
+		pulse = irdata[i] & 0x80 ? false : true;
+		duration = (irdata[i] & 0x7F) * 10000; /* ns */
+
+		if (data->ev.pulse != pulse) {
+			if (data->ev.duration != 0) {
+				ir_raw_event_store(data->dev, &data->ev);
+				data->ev.duration = 0;
+			}
+
+			data->ev.pulse = pulse;
+		}
+
+		data->ev.duration += duration;
 	}
 
-	if (data->idle_count > WBCIR_MAX_IDLE_BYTES) {
-		/* Set RXINACTIVE... */
+	if (disable) {
+		if (data->ev.duration != 0 && !data->irdata_error) {
+			ir_raw_event_store(data->dev, &data->ev);
+			data->ev.duration = 0;
+		}
+
+		/* Set RXINACTIVE */
 		outb(WBCIR_RX_DISABLE, data->sbase + WBCIR_REG_SP3_ASCR);
 
-		/* ...and drain the FIFO */
+		/* Drain the FIFO */
 		while (inb(data->sbase + WBCIR_REG_SP3_LSR) & WBCIR_RX_AVAIL)
 			inb(data->sbase + WBCIR_REG_SP3_RXDATA);
 
-		dev_dbg(dev, "IRDATA:\n");
-		for (i = 0; i < data->irdata_count; i += BITS_PER_LONG)
-			dev_dbg(dev, "0x%08lX\n", data->irdata[i/BITS_PER_LONG]);
-
-		switch (protocol) {
-		case IR_PROTOCOL_RC5:
-			wbcir_parse_rc5(dev, data);
-			break;
-		case IR_PROTOCOL_RC6:
-			wbcir_parse_rc6(dev, data);
-			break;
-		case IR_PROTOCOL_NEC:
-			wbcir_parse_nec(dev, data);
-			break;
-		}
-
-		wbcir_reset_irdata(data);
+		ir_raw_event_reset(data->dev);
+		data->irdata_error = false;
+		data->irdata_active = false;
+		led_trigger_event(data->rxtrigger, LED_OFF);
 	}
 
+	ir_raw_event_handle(data->dev);
+
 out:
-	spin_unlock_irqrestore(&wbcir_lock, flags);
+	spin_unlock_irqrestore(&data->spinlock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -1199,6 +555,10 @@ finish:
 	wbcir_select_bank(data, WBCIR_BANK_0);
 	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
 
+	/* Disable LED */
+	data->irdata_active = false;
+	led_trigger_event(data->rxtrigger, LED_OFF);
+
 	/*
 	 * ACPI will set the HW disable bit for SP3 which means that the
 	 * output signals are left in an undefined state which may cause
@@ -1323,8 +683,15 @@ wbcir_init_hw(struct wbcir_data *data)
 	/* Clear AUX status bits */
 	outb(0xE0, data->sbase + WBCIR_REG_SP3_ASCR);
 
+	/* Clear IR decoding state */
+	data->irdata_active = false;
+	led_trigger_event(data->rxtrigger, LED_OFF);
+	data->irdata_error = false;
+	data->ev.duration = 0;
+	ir_raw_event_reset(data->dev);
+	ir_raw_event_handle(data->dev);
+
 	/* Enable interrupts */
-	wbcir_reset_irdata(data);
 	outb(WBCIR_IRQ_RX | WBCIR_IRQ_ERR, data->sbase + WBCIR_REG_SP3_IER);
 }
 
@@ -1361,6 +728,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
 
 	pnp_set_drvdata(device, data);
 
+	spin_lock_init(&data->spinlock);
 	data->ebase = pnp_port_start(device, 0);
 	data->wbase = pnp_port_start(device, 1);
 	data->sbase = pnp_port_start(device, 2);
@@ -1426,43 +794,25 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
 	if (err)
 		goto exit_unregister_rxtrigger;
 
-	data->input_dev = input_allocate_device();
-	if (!data->input_dev) {
+	data->dev = rc_allocate_device();
+	if (!data->dev) {
 		err = -ENOMEM;
 		goto exit_unregister_led;
 	}
 
-	data->input_dev->evbit[0] = BIT(EV_KEY);
-	data->input_dev->name = WBCIR_NAME;
-	data->input_dev->phys = "wbcir/cir0";
-	data->input_dev->id.bustype = BUS_HOST;
-	data->input_dev->id.vendor  = PCI_VENDOR_ID_WINBOND;
-	data->input_dev->id.product = WBCIR_ID_FAMILY;
-	data->input_dev->id.version = WBCIR_ID_CHIP;
-	data->input_dev->getkeycode = wbcir_getkeycode;
-	data->input_dev->setkeycode = wbcir_setkeycode;
-	input_set_capability(data->input_dev, EV_MSC, MSC_SCAN);
-	input_set_drvdata(data->input_dev, data);
-
-	err = input_register_device(data->input_dev);
+	data->dev->driver_name = WBCIR_NAME;
+	data->dev->input_name = WBCIR_NAME;
+	data->dev->input_phys = "wbcir/cir0";
+	data->dev->input_id.bustype = BUS_HOST;
+	data->dev->input_id.vendor = PCI_VENDOR_ID_WINBOND;
+	data->dev->input_id.product = WBCIR_ID_FAMILY;
+	data->dev->input_id.version = WBCIR_ID_CHIP;
+	data->dev->priv = data;
+	data->dev->dev.parent = &device->dev;
+
+	err = rc_register_device(data->dev);
 	if (err)
-		goto exit_free_input;
-
-	data->last_scancode = INVALID_SCANCODE;
-	INIT_LIST_HEAD(&data->keytable);
-	setup_timer(&data->timer_keyup, wbcir_keyup, (unsigned long)data);
-
-	/* Load default keymaps */
-	if (protocol == IR_PROTOCOL_RC6) {
-		int i;
-		for (i = 0; i < ARRAY_SIZE(rc6_def_keymap); i++) {
-			err = wbcir_setkeycode(data->input_dev,
-					       (int)rc6_def_keymap[i].scancode,
-					       (int)rc6_def_keymap[i].keycode);
-			if (err)
-				goto exit_unregister_keys;
-		}
-	}
+		goto exit_free_rc;
 
 	device_init_wakeup(&device->dev, 1);
 
@@ -1470,21 +820,8 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
 
 	return 0;
 
-exit_unregister_keys:
-	if (!list_empty(&data->keytable)) {
-		struct wbcir_keyentry *key;
-		struct wbcir_keyentry *keytmp;
-
-		list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
-			list_del(&key->list);
-			kfree(key);
-		}
-	}
-	input_unregister_device(data->input_dev);
-	/* Can't call input_free_device on an unregistered device */
-	data->input_dev = NULL;
-exit_free_input:
-	input_free_device(data->input_dev);
+exit_free_rc:
+	rc_free_device(data->dev);
 exit_unregister_led:
 	led_classdev_unregister(&data->led);
 exit_unregister_rxtrigger:
@@ -1510,15 +847,11 @@ static void __devexit
 wbcir_remove(struct pnp_dev *device)
 {
 	struct wbcir_data *data = pnp_get_drvdata(device);
-	struct wbcir_keyentry *key;
-	struct wbcir_keyentry *keytmp;
 
 	/* Disable interrupts */
 	wbcir_select_bank(data, WBCIR_BANK_0);
 	outb(WBCIR_IRQ_NONE, data->sbase + WBCIR_REG_SP3_IER);
 
-	del_timer_sync(&data->timer_keyup);
-
 	free_irq(data->irq, device);
 
 	/* Clear status bits NEC_REP, BUFF, MSG_END, MATCH */
@@ -1530,8 +863,7 @@ wbcir_remove(struct pnp_dev *device)
 	/* Clear BUFF_EN, END_EN, MATCH_EN */
 	wbcir_set_bits(data->wbase + WBCIR_REG_WCEIR_EV_EN, 0x00, 0x07);
 
-	/* This will generate a keyup event if necessary */
-	input_unregister_device(data->input_dev);
+	rc_unregister_device(data->dev);
 
 	led_trigger_unregister_simple(data->rxtrigger);
 	led_trigger_unregister_simple(data->txtrigger);
@@ -1544,11 +876,6 @@ wbcir_remove(struct pnp_dev *device)
 	release_region(data->ebase, EHFUNC_IOMEM_LEN);
 	release_region(data->sbase, SP_IOMEM_LEN);
 
-	list_for_each_entry_safe(key, keytmp, &data->keytable, list) {
-		list_del(&key->list);
-		kfree(key);
-	}
-
 	kfree(data);
 
 	pnp_set_drvdata(device, NULL);
@@ -1581,8 +908,7 @@ wbcir_init(void)
 	case IR_PROTOCOL_RC6:
 		break;
 	default:
-		printk(KERN_ERR DRVNAME ": Invalid protocol argument\n");
-		return -EINVAL;
+		printk(KERN_ERR DRVNAME ": Invalid power-on protocol\n");
 	}
 
 	ret = pnp_register_driver(&wbcir_driver);
@@ -1598,11 +924,9 @@ wbcir_exit(void)
 	pnp_unregister_driver(&wbcir_driver);
 }
 
-MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
-MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver");
-MODULE_LICENSE("GPL");
-
 module_init(wbcir_init);
 module_exit(wbcir_exit);
 
-
+MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
+MODULE_DESCRIPTION("Winbond SuperI/O Consumer IR Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index ac16e815e27..eb875af05e7 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -7,11 +7,6 @@ config VIDEO_V4L2
 	depends on VIDEO_DEV && VIDEO_V4L2_COMMON
 	default VIDEO_DEV && VIDEO_V4L2_COMMON
 
-config VIDEO_V4L1
-	tristate
-	depends on VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
-	default VIDEO_DEV && VIDEO_V4L2_COMMON && VIDEO_ALLOW_V4L1
-
 config VIDEOBUF_GEN
 	tristate
 
@@ -96,7 +91,7 @@ config VIDEO_HELPER_CHIPS_AUTO
 
 config VIDEO_IR_I2C
 	tristate "I2C module for IR" if !VIDEO_HELPER_CHIPS_AUTO
-	depends on I2C && VIDEO_IR
+	depends on I2C && RC_CORE
 	default y
 	---help---
 	  Most boards have an IR chip directly connected via GPIO. However,
@@ -112,7 +107,7 @@ config VIDEO_IR_I2C
 #
 
 menu "Encoders/decoders and other helper chips"
-	depends on !VIDEO_HELPER_CHIPS_AUTO
+	visible if !VIDEO_HELPER_CHIPS_AUTO
 
 comment "Audio decoders"
 
@@ -666,6 +661,16 @@ config VIDEO_HEXIUM_GEMINI
 	  To compile this driver as a module, choose M here: the
 	  module will be called hexium_gemini.
 
+config VIDEO_TIMBERDALE
+	tristate "Support for timberdale Video In/LogiWIN"
+	depends on VIDEO_V4L2 && I2C
+	select DMA_ENGINE
+	select TIMB_DMA
+	select VIDEO_ADV7180
+	select VIDEOBUF_DMA_CONTIG
+	---help---
+	Add support for the Video In peripherial of the timberdale FPGA.
+
 source "drivers/media/video/cx88/Kconfig"
 
 source "drivers/media/video/cx23885/Kconfig"
@@ -789,6 +794,12 @@ config SOC_CAMERA_PLATFORM
 	help
 	  This is a generic SoC camera platform driver, useful for testing
 
+config SOC_CAMERA_OV2640
+	tristate "ov2640 camera support"
+	depends on SOC_CAMERA && I2C
+	help
+	  This is a ov2640 camera driver
+
 config SOC_CAMERA_OV6650
 	tristate "ov6650 sensor support"
 	depends on SOC_CAMERA && I2C
@@ -905,21 +916,8 @@ source "drivers/media/video/cx231xx/Kconfig"
 
 source "drivers/media/video/usbvision/Kconfig"
 
-source "drivers/media/video/usbvideo/Kconfig"
-
 source "drivers/media/video/et61x251/Kconfig"
 
-config USB_SE401
-	tristate "USB SE401 Camera support"
-	depends on VIDEO_V4L1
-	---help---
-	  Say Y here if you want to connect this type of camera to your
-	  computer's USB port. See <file:Documentation/video4linux/se401.txt>
-	  for more information and for a list of supported cameras.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called se401.
-
 source "drivers/media/video/sn9c102/Kconfig"
 
 source "drivers/media/video/pwc/Kconfig"
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index af79d476a4c..81e38cb0b84 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -22,10 +22,6 @@ endif
 
 obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o
 
-ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
-  obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
-endif
-
 # All i2c modules must come first:
 
 obj-$(CONFIG_VIDEO_TUNER) += tuner.o
@@ -79,6 +75,7 @@ obj-$(CONFIG_SOC_CAMERA_MT9M111)	+= mt9m111.o
 obj-$(CONFIG_SOC_CAMERA_MT9T031)	+= mt9t031.o
 obj-$(CONFIG_SOC_CAMERA_MT9T112)	+= mt9t112.o
 obj-$(CONFIG_SOC_CAMERA_MT9V022)	+= mt9v022.o
+obj-$(CONFIG_SOC_CAMERA_OV2640)		+= ov2640.o
 obj-$(CONFIG_SOC_CAMERA_OV6650)		+= ov6650.o
 obj-$(CONFIG_SOC_CAMERA_OV772X)		+= ov772x.o
 obj-$(CONFIG_SOC_CAMERA_OV9640)		+= ov9640.o
@@ -106,6 +103,7 @@ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
 obj-$(CONFIG_VIDEO_MXB) += mxb.o
 obj-$(CONFIG_VIDEO_HEXIUM_ORION) += hexium_orion.o
 obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
+obj-$(CONFIG_VIDEO_TIMBERDALE)	+= timblogiw.o
 
 obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
 obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
@@ -124,8 +122,6 @@ obj-$(CONFIG_VIDEO_CAFE_CCIC) += cafe_ccic.o
 
 obj-$(CONFIG_VIDEO_VIA_CAMERA) += via-camera.o
 
-obj-$(CONFIG_USB_DABUSB)        += dabusb.o
-obj-$(CONFIG_USB_SE401)         += se401.o
 obj-$(CONFIG_USB_ZR364XX)       += zr364xx.o
 obj-$(CONFIG_USB_STKWEBCAM)     += stkwebcam.o
 
@@ -136,10 +132,6 @@ obj-$(CONFIG_USB_GSPCA)         += gspca/
 
 obj-$(CONFIG_VIDEO_HDPVR)	+= hdpvr/
 
-obj-$(CONFIG_USB_IBMCAM)        += usbvideo/
-obj-$(CONFIG_USB_KONICAWC)      += usbvideo/
-obj-$(CONFIG_USB_VICAM)         += usbvideo/
-obj-$(CONFIG_USB_QUICKCAM_MESSENGER)	+= usbvideo/
 obj-$(CONFIG_USB_S2255)		+= s2255drv.o
 
 obj-$(CONFIG_VIDEO_IVTV) += ivtv/
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index 31e7a123d19..f989f2820d8 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -712,7 +712,7 @@ static int ar_initialize(struct ar *ar)
 static const struct v4l2_file_operations ar_fops = {
 	.owner		= THIS_MODULE,
 	.read		= ar_read,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops ar_ioctl_ops = {
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 0453816d4ec..01be89fa5c7 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -212,7 +212,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 		   be abstracted out if we ever need to support a different
 		   demod) */
 		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				NULL, "au8522", 0x8e >> 1, NULL);
+				"au8522", 0x8e >> 1, NULL);
 		if (sd == NULL)
 			printk(KERN_ERR "analog subdev registration failed\n");
 	}
@@ -221,7 +221,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 	if (dev->board.tuner_type != TUNER_ABSENT) {
 		/* Load the tuner module, which does the attach */
 		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				NULL, "tuner", dev->board.tuner_addr, NULL);
+				"tuner", dev->board.tuner_addr, NULL);
 		if (sd == NULL)
 			printk(KERN_ERR "tuner subdev registration fail\n");
 
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 162fd5f9d44..e41e4ad5cc4 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -122,6 +122,7 @@ static void au0828_irq_callback(struct urb *urb)
 {
 	struct au0828_dmaqueue  *dma_q = urb->context;
 	struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq);
+	unsigned long flags = 0;
 	int rc, i;
 
 	switch (urb->status) {
@@ -139,9 +140,9 @@ static void au0828_irq_callback(struct urb *urb)
 	}
 
 	/* Copy data from URB */
-	spin_lock(&dev->slock);
+	spin_lock_irqsave(&dev->slock, flags);
 	rc = dev->isoc_ctl.isoc_copy(dev, urb);
-	spin_unlock(&dev->slock);
+	spin_unlock_irqrestore(&dev->slock, flags);
 
 	/* Reset urb buffers */
 	for (i = 0; i < urb->number_of_packets; i++) {
@@ -576,7 +577,7 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
 			p += 4;
 			au0828_isocdbg("Video frame %s\n",
 				       (fbyte & 0x40) ? "odd" : "even");
-			if (!(fbyte & 0x40)) {
+			if (fbyte & 0x40) {
 				/* VBI */
 				if (vbi_buf != NULL)
 					vbi_buffer_filled(dev,
@@ -597,6 +598,15 @@ static inline int au0828_isoc_copy(struct au0828_dev *dev, struct urb *urb)
 					outp = NULL;
 				else
 					outp = videobuf_to_vmalloc(&buf->vb);
+
+				/* As long as isoc traffic is arriving, keep
+				   resetting the timer */
+				if (dev->vid_timeout_running)
+					mod_timer(&dev->vid_timeout,
+						  jiffies + (HZ / 10));
+				if (dev->vbi_timeout_running)
+					mod_timer(&dev->vbi_timeout,
+						  jiffies + (HZ / 10));
 			}
 
 			if (buf != NULL) {
@@ -907,6 +917,57 @@ static int get_ressource(struct au0828_fh *fh)
 	}
 }
 
+/* This function ensures that video frames continue to be delivered even if
+   the ITU-656 input isn't receiving any data (thereby preventing applications
+   such as tvtime from hanging) */
+void au0828_vid_buffer_timeout(unsigned long data)
+{
+	struct au0828_dev *dev = (struct au0828_dev *) data;
+	struct au0828_dmaqueue *dma_q = &dev->vidq;
+	struct au0828_buffer *buf;
+	unsigned char *vid_data;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&dev->slock, flags);
+
+	buf = dev->isoc_ctl.buf;
+	if (buf != NULL) {
+		vid_data = videobuf_to_vmalloc(&buf->vb);
+		memset(vid_data, 0x00, buf->vb.size); /* Blank green frame */
+		buffer_filled(dev, dma_q, buf);
+	}
+	get_next_buf(dma_q, &buf);
+
+	if (dev->vid_timeout_running == 1)
+		mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
+
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+void au0828_vbi_buffer_timeout(unsigned long data)
+{
+	struct au0828_dev *dev = (struct au0828_dev *) data;
+	struct au0828_dmaqueue *dma_q = &dev->vbiq;
+	struct au0828_buffer *buf;
+	unsigned char *vbi_data;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(&dev->slock, flags);
+
+	buf = dev->isoc_ctl.vbi_buf;
+	if (buf != NULL) {
+		vbi_data = videobuf_to_vmalloc(&buf->vb);
+		memset(vbi_data, 0x00, buf->vb.size);
+		vbi_buffer_filled(dev, dma_q, buf);
+	}
+	vbi_get_next_buf(dma_q, &buf);
+
+	if (dev->vbi_timeout_running == 1)
+		mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+
 static int au0828_v4l2_open(struct file *filp)
 {
 	int ret = 0;
@@ -976,7 +1037,6 @@ static int au0828_v4l2_open(struct file *filp)
 				    V4L2_FIELD_SEQ_TB,
 				    sizeof(struct au0828_buffer), fh, NULL);
 
-
 	return ret;
 }
 
@@ -987,11 +1047,19 @@ static int au0828_v4l2_close(struct file *filp)
 	struct au0828_dev *dev = fh->dev;
 
 	if (res_check(fh, AU0828_RESOURCE_VIDEO)) {
+		/* Cancel timeout thread in case they didn't call streamoff */
+		dev->vid_timeout_running = 0;
+		del_timer_sync(&dev->vid_timeout);
+
 		videobuf_stop(&fh->vb_vidq);
 		res_free(fh, AU0828_RESOURCE_VIDEO);
 	}
 
 	if (res_check(fh, AU0828_RESOURCE_VBI)) {
+		/* Cancel timeout thread in case they didn't call streamoff */
+		dev->vbi_timeout_running = 0;
+		del_timer_sync(&dev->vbi_timeout);
+
 		videobuf_stop(&fh->vb_vbiq);
 		res_free(fh, AU0828_RESOURCE_VBI);
 	}
@@ -1048,6 +1116,13 @@ static ssize_t au0828_v4l2_read(struct file *filp, char __user *buf,
 		if (!res_get(fh, AU0828_RESOURCE_VBI))
 			return -EBUSY;
 
+		if (dev->vbi_timeout_running == 0) {
+			/* Handle case where caller tries to read without
+			   calling streamon first */
+			dev->vbi_timeout_running = 1;
+			mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
+		}
+
 		return videobuf_read_stream(&fh->vb_vbiq, buf, count, pos, 0,
 					    filp->f_flags & O_NONBLOCK);
 	}
@@ -1577,10 +1652,15 @@ static int vidioc_streamon(struct file *file, void *priv,
 		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 1);
 	}
 
-	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
 		rc = videobuf_streamon(&fh->vb_vidq);
-	else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE)
+		dev->vid_timeout_running = 1;
+		mod_timer(&dev->vid_timeout, jiffies + (HZ / 10));
+	} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
 		rc = videobuf_streamon(&fh->vb_vbiq);
+		dev->vbi_timeout_running = 1;
+		mod_timer(&dev->vbi_timeout, jiffies + (HZ / 10));
+	}
 
 	return rc;
 }
@@ -1607,6 +1687,9 @@ static int vidioc_streamoff(struct file *file, void *priv,
 		fh, type, fh->resources, dev->resources);
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		dev->vid_timeout_running = 0;
+		del_timer_sync(&dev->vid_timeout);
+
 		v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_stream, 0);
 		rc = au0828_stream_interrupt(dev);
 		if (rc != 0)
@@ -1621,6 +1704,9 @@ static int vidioc_streamoff(struct file *file, void *priv,
 		videobuf_streamoff(&fh->vb_vidq);
 		res_free(fh, AU0828_RESOURCE_VIDEO);
 	} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
+		dev->vbi_timeout_running = 0;
+		del_timer_sync(&dev->vbi_timeout);
+
 		videobuf_streamoff(&fh->vb_vbiq);
 		res_free(fh, AU0828_RESOURCE_VBI);
 	}
@@ -1723,15 +1809,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 	return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct au0828_fh *fh = priv;
-
-	return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
-}
-#endif
-
 static struct v4l2_file_operations au0828_v4l_fops = {
 	.owner      = THIS_MODULE,
 	.open       = au0828_v4l2_open,
@@ -1775,9 +1852,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_s_register          = vidioc_s_register,
 #endif
 	.vidioc_g_chip_ident        = vidioc_g_chip_ident,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf                = vidiocgmbuf,
-#endif
 };
 
 static const struct video_device au0828_video_template = {
@@ -1840,6 +1914,14 @@ int au0828_analog_register(struct au0828_dev *dev,
 	INIT_LIST_HEAD(&dev->vbiq.active);
 	INIT_LIST_HEAD(&dev->vbiq.queued);
 
+	dev->vid_timeout.function = au0828_vid_buffer_timeout;
+	dev->vid_timeout.data = (unsigned long) dev;
+	init_timer(&dev->vid_timeout);
+
+	dev->vbi_timeout.function = au0828_vbi_buffer_timeout;
+	dev->vbi_timeout.data = (unsigned long) dev;
+	init_timer(&dev->vbi_timeout);
+
 	dev->width = NTSC_STD_W;
 	dev->height = NTSC_STD_H;
 	dev->field_size = dev->width * dev->height;
diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h
index 9905bc4f5f5..9cde3532182 100644
--- a/drivers/media/video/au0828/au0828.h
+++ b/drivers/media/video/au0828/au0828.h
@@ -53,7 +53,7 @@
 
 /* Defination for AU0828 USB transfer */
 #define AU0828_MAX_ISO_BUFS    12  /* maybe resize this value in the future */
-#define AU0828_ISO_PACKETS_PER_URB      10
+#define AU0828_ISO_PACKETS_PER_URB      128
 
 #define AU0828_MIN_BUF 4
 #define AU0828_DEF_BUF 8
@@ -204,6 +204,10 @@ struct au0828_dev {
 	unsigned int resources;	/* resources in use */
 	struct video_device *vdev;
 	struct video_device *vbi_dev;
+	struct timer_list vid_timeout;
+	int vid_timeout_running;
+	struct timer_list vbi_timeout;
+	int vbi_timeout_running;
 	int width;
 	int height;
 	int vbi_width;
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 1a4a89fdf76..7da5c2e1fc1 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,10 +1,10 @@
 config VIDEO_BT848
 	tristate "BT848 Video For Linux"
-	depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT
+	depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
-	depends on VIDEO_IR
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 87d8b006ef7..49efcf660ba 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -3529,7 +3529,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		struct v4l2_subdev *sd;
 
 		sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, NULL, "saa6588", 0, addrs);
+			&btv->c.i2c_adap, "saa6588", 0, addrs);
 		btv->has_saa6588 = (sd != NULL);
 	}
 
@@ -3554,7 +3554,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		};
 
 		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, NULL, "msp3400", 0, addrs);
+			&btv->c.i2c_adap, "msp3400", 0, addrs);
 		if (btv->sd_msp34xx)
 			return;
 		goto no_audio;
@@ -3568,7 +3568,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		};
 
 		if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, NULL, "tda7432", 0, addrs))
+				&btv->c.i2c_adap, "tda7432", 0, addrs))
 			return;
 		goto no_audio;
 	}
@@ -3576,7 +3576,7 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	case 3: {
 		/* The user specified that we should probe for tvaudio */
 		btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, NULL, "tvaudio", 0, tvaudio_addrs());
+			&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
 		if (btv->sd_tvaudio)
 			return;
 		goto no_audio;
@@ -3596,11 +3596,11 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	   found is really something else (e.g. a tea6300). */
 	if (!bttv_tvcards[btv->c.type].no_msp34xx) {
 		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, NULL, "msp3400",
+			&btv->c.i2c_adap, "msp3400",
 			0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
 	} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
 		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-			&btv->c.i2c_adap, NULL, "msp3400",
+			&btv->c.i2c_adap, "msp3400",
 			0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
 	}
 
@@ -3616,13 +3616,13 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		};
 
 		if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, NULL, "tda7432", 0, addrs))
+				&btv->c.i2c_adap, "tda7432", 0, addrs))
 			return;
 	}
 
 	/* Now see if we can find one of the tvaudio devices. */
 	btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-		&btv->c.i2c_adap, NULL, "tvaudio", 0, tvaudio_addrs());
+		&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
 	if (btv->sd_tvaudio)
 		return;
 
@@ -3646,13 +3646,13 @@ void __devinit bttv_init_tuner(struct bttv *btv)
 		/* Load tuner module before issuing tuner config call! */
 		if (bttv_tvcards[btv->c.type].has_radio)
 			v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, NULL, "tuner",
+				&btv->c.i2c_adap, "tuner",
 				0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
 		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, NULL, "tuner",
+				&btv->c.i2c_adap, "tuner",
 				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, NULL, "tuner",
+				&btv->c.i2c_adap, "tuner",
 				0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
 
 		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 3da6e80e104..91399c94cd1 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -42,7 +42,6 @@
 #include <linux/fs.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/kdev_t.h>
 #include "bttvp.h"
@@ -56,7 +55,7 @@
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
-#include <media/rds.h>
+#include <media/saa6588.h>
 
 
 unsigned int bttv_num;			/* number of Bt848s in use */
@@ -190,8 +189,14 @@ static void request_modules(struct bttv *dev)
 	INIT_WORK(&dev->request_module_wk, request_module_async);
 	schedule_work(&dev->request_module_wk);
 }
+
+static void flush_request_modules(struct bttv *dev)
+{
+	flush_work_sync(&dev->request_module_wk);
+}
 #else
 #define request_modules(dev)
+#define flush_request_modules(dev)
 #endif /* CONFIG_MODULES */
 
 
@@ -855,7 +860,6 @@ int check_alloc_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bit)
 		xbits |= RESOURCE_VIDEO_READ | RESOURCE_VIDEO_STREAM;
 
 	/* is it free? */
-	mutex_lock(&btv->lock);
 	if (btv->resources & xbits) {
 		/* no, someone else uses it */
 		goto fail;
@@ -885,11 +889,9 @@ int check_alloc_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bit)
 	/* it's free, grab it */
 	fh->resources  |= bit;
 	btv->resources |= bit;
-	mutex_unlock(&btv->lock);
 	return 1;
 
  fail:
-	mutex_unlock(&btv->lock);
 	return 0;
 }
 
@@ -941,7 +943,6 @@ void free_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bits)
 		/* trying to free ressources not allocated by us ... */
 		printk("bttv: BUG! (btres)\n");
 	}
-	mutex_lock(&btv->lock);
 	fh->resources  &= ~bits;
 	btv->resources &= ~bits;
 
@@ -952,8 +953,6 @@ void free_btres_lock(struct bttv *btv, struct bttv_fh *fh, int bits)
 
 	if (0 == (bits & VBI_RESOURCES))
 		disclaim_vbi_lines(btv);
-
-	mutex_unlock(&btv->lock);
 }
 
 /* ----------------------------------------------------------------------- */
@@ -1714,28 +1713,20 @@ static int bttv_prepare_buffer(struct videobuf_queue *q,struct bttv *btv,
 
 		/* Make sure tvnorm and vbi_end remain consistent
 		   until we're done. */
-		mutex_lock(&btv->lock);
 
 		norm = btv->tvnorm;
 
 		/* In this mode capturing always starts at defrect.top
 		   (default VDELAY), ignoring cropping parameters. */
 		if (btv->vbi_end > bttv_tvnorms[norm].cropcap.defrect.top) {
-			mutex_unlock(&btv->lock);
 			return -EINVAL;
 		}
 
-		mutex_unlock(&btv->lock);
-
 		c.rect = bttv_tvnorms[norm].cropcap.defrect;
 	} else {
-		mutex_lock(&btv->lock);
-
 		norm = btv->tvnorm;
 		c = btv->crop[!!fh->do_crop];
 
-		mutex_unlock(&btv->lock);
-
 		if (width < c.min_scaled_width ||
 		    width > c.max_scaled_width ||
 		    height < c.min_scaled_height)
@@ -1859,7 +1850,6 @@ static int bttv_s_std(struct file *file, void *priv, v4l2_std_id *id)
 	unsigned int i;
 	int err;
 
-	mutex_lock(&btv->lock);
 	err = v4l2_prio_check(&btv->prio, fh->prio);
 	if (err)
 		goto err;
@@ -1875,7 +1865,6 @@ static int bttv_s_std(struct file *file, void *priv, v4l2_std_id *id)
 	set_tvnorm(btv, i);
 
 err:
-	mutex_unlock(&btv->lock);
 
 	return err;
 }
@@ -1899,7 +1888,6 @@ static int bttv_enum_input(struct file *file, void *priv,
 	struct bttv *btv = fh->btv;
 	int rc = 0;
 
-	mutex_lock(&btv->lock);
 	if (i->index >= bttv_tvcards[btv->c.type].video_inputs) {
 		rc = -EINVAL;
 		goto err;
@@ -1929,7 +1917,6 @@ static int bttv_enum_input(struct file *file, void *priv,
 	i->std = BTTV_NORMS;
 
 err:
-	mutex_unlock(&btv->lock);
 
 	return rc;
 }
@@ -1939,9 +1926,7 @@ static int bttv_g_input(struct file *file, void *priv, unsigned int *i)
 	struct bttv_fh *fh = priv;
 	struct bttv *btv = fh->btv;
 
-	mutex_lock(&btv->lock);
 	*i = btv->input;
-	mutex_unlock(&btv->lock);
 
 	return 0;
 }
@@ -1953,7 +1938,6 @@ static int bttv_s_input(struct file *file, void *priv, unsigned int i)
 
 	int err;
 
-	mutex_lock(&btv->lock);
 	err = v4l2_prio_check(&btv->prio, fh->prio);
 	if (unlikely(err))
 		goto err;
@@ -1966,7 +1950,6 @@ static int bttv_s_input(struct file *file, void *priv, unsigned int i)
 	set_input(btv, i, btv->tvnorm);
 
 err:
-	mutex_unlock(&btv->lock);
 	return 0;
 }
 
@@ -1980,7 +1963,6 @@ static int bttv_s_tuner(struct file *file, void *priv,
 	if (unlikely(0 != t->index))
 		return -EINVAL;
 
-	mutex_lock(&btv->lock);
 	if (unlikely(btv->tuner_type == TUNER_ABSENT)) {
 		err = -EINVAL;
 		goto err;
@@ -1996,7 +1978,6 @@ static int bttv_s_tuner(struct file *file, void *priv,
 		btv->audio_mode_gpio(btv, t, 1);
 
 err:
-	mutex_unlock(&btv->lock);
 
 	return 0;
 }
@@ -2007,10 +1988,8 @@ static int bttv_g_frequency(struct file *file, void *priv,
 	struct bttv_fh *fh  = priv;
 	struct bttv *btv = fh->btv;
 
-	mutex_lock(&btv->lock);
 	f->type = btv->radio_user ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
 	f->frequency = btv->freq;
-	mutex_unlock(&btv->lock);
 
 	return 0;
 }
@@ -2025,7 +2004,6 @@ static int bttv_s_frequency(struct file *file, void *priv,
 	if (unlikely(f->tuner != 0))
 		return -EINVAL;
 
-	mutex_lock(&btv->lock);
 	err = v4l2_prio_check(&btv->prio, fh->prio);
 	if (unlikely(err))
 		goto err;
@@ -2040,7 +2018,6 @@ static int bttv_s_frequency(struct file *file, void *priv,
 	if (btv->has_matchbox && btv->radio_user)
 		tea5757_set_freq(btv, btv->freq);
 err:
-	mutex_unlock(&btv->lock);
 
 	return 0;
 }
@@ -2173,7 +2150,6 @@ limit_scaled_size_lock       (struct bttv_fh *               fh,
 
 	/* Make sure tvnorm, vbi_end and the current cropping parameters
 	   remain consistent until we're done. */
-	mutex_lock(&btv->lock);
 
 	b = &bttv_tvnorms[btv->tvnorm].cropcap.bounds;
 
@@ -2251,7 +2227,6 @@ limit_scaled_size_lock       (struct bttv_fh *               fh,
 	rc = 0; /* success */
 
  fail:
-	mutex_unlock(&btv->lock);
 
 	return rc;
 }
@@ -2283,9 +2258,7 @@ verify_window_lock		(struct bttv_fh *               fh,
 	if (V4L2_FIELD_ANY == field) {
 		__s32 height2;
 
-		mutex_lock(&fh->btv->lock);
 		height2 = fh->btv->crop[!!fh->do_crop].rect.height >> 1;
-		mutex_unlock(&fh->btv->lock);
 		field = (win->w.height > height2)
 			? V4L2_FIELD_INTERLACED
 			: V4L2_FIELD_TOP;
@@ -2361,7 +2334,6 @@ static int setup_window_lock(struct bttv_fh *fh, struct bttv *btv,
 		}
 	}
 
-	mutex_lock(&fh->cap.vb_lock);
 	/* clip against screen */
 	if (NULL != btv->fbuf.base)
 		n = btcx_screen_clips(btv->fbuf.fmt.width, btv->fbuf.fmt.height,
@@ -2392,13 +2364,6 @@ static int setup_window_lock(struct bttv_fh *fh, struct bttv *btv,
 	fh->ov.field    = win->field;
 	fh->ov.setup_ok = 1;
 
-	/*
-	 * FIXME: btv is protected by btv->lock mutex, while btv->init
-	 *	  is protected by fh->cap.vb_lock. This seems to open the
-	 *	  possibility for some race situations. Maybe the better would
-	 *	  be to unify those locks or to use another way to store the
-	 *	  init values that will be consumed by videobuf callbacks
-	 */
 	btv->init.ov.w.width   = win->w.width;
 	btv->init.ov.w.height  = win->w.height;
 	btv->init.ov.field     = win->field;
@@ -2413,7 +2378,6 @@ static int setup_window_lock(struct bttv_fh *fh, struct bttv *btv,
 		bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new);
 		retval = bttv_switch_overlay(btv,fh,new);
 	}
-	mutex_unlock(&fh->cap.vb_lock);
 	return retval;
 }
 
@@ -2527,9 +2491,7 @@ static int bttv_try_fmt_vid_cap(struct file *file, void *priv,
 	if (V4L2_FIELD_ANY == field) {
 		__s32 height2;
 
-		mutex_lock(&btv->lock);
 		height2 = btv->crop[!!fh->do_crop].rect.height >> 1;
-		mutex_unlock(&btv->lock);
 		field = (f->fmt.pix.height > height2)
 			? V4L2_FIELD_INTERLACED
 			: V4L2_FIELD_BOTTOM;
@@ -2615,7 +2577,6 @@ static int bttv_s_fmt_vid_cap(struct file *file, void *priv,
 	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
 
 	/* update our state informations */
-	mutex_lock(&fh->cap.vb_lock);
 	fh->fmt              = fmt;
 	fh->cap.field        = f->fmt.pix.field;
 	fh->cap.last         = V4L2_FIELD_NONE;
@@ -2624,7 +2585,6 @@ static int bttv_s_fmt_vid_cap(struct file *file, void *priv,
 	btv->init.fmt        = fmt;
 	btv->init.width      = f->fmt.pix.width;
 	btv->init.height     = f->fmt.pix.height;
-	mutex_unlock(&fh->cap.vb_lock);
 
 	return 0;
 }
@@ -2643,34 +2603,6 @@ static int bttv_s_fmt_vid_overlay(struct file *file, void *priv,
 	return setup_window_lock(fh, btv, &f->fmt.win, 1);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	int retval;
-	unsigned int i;
-	struct bttv_fh *fh = priv;
-
-	mutex_lock(&fh->cap.vb_lock);
-	retval = __videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
-				     V4L2_MEMORY_MMAP);
-	if (retval < 0) {
-		mutex_unlock(&fh->cap.vb_lock);
-		return retval;
-	}
-
-	gbuffers = retval;
-	memset(mbuf, 0, sizeof(*mbuf));
-	mbuf->frames = gbuffers;
-	mbuf->size   = gbuffers * gbufsize;
-
-	for (i = 0; i < gbuffers; i++)
-		mbuf->offsets[i] = i * gbufsize;
-
-	mutex_unlock(&fh->cap.vb_lock);
-	return 0;
-}
-#endif
-
 static int bttv_querycap(struct file *file, void  *priv,
 				struct v4l2_capability *cap)
 {
@@ -2776,10 +2708,8 @@ static int bttv_overlay(struct file *file, void *f, unsigned int on)
 	int retval = 0;
 
 	if (on) {
-		mutex_lock(&fh->cap.vb_lock);
 		/* verify args */
 		if (unlikely(!btv->fbuf.base)) {
-			mutex_unlock(&fh->cap.vb_lock);
 			return -EINVAL;
 		}
 		if (unlikely(!fh->ov.setup_ok)) {
@@ -2788,13 +2718,11 @@ static int bttv_overlay(struct file *file, void *f, unsigned int on)
 		}
 		if (retval)
 			return retval;
-		mutex_unlock(&fh->cap.vb_lock);
 	}
 
 	if (!check_alloc_btres_lock(btv, fh, RESOURCE_OVERLAY))
 		return -EBUSY;
 
-	mutex_lock(&fh->cap.vb_lock);
 	if (on) {
 		fh->ov.tvnorm = btv->tvnorm;
 		new = videobuf_sg_alloc(sizeof(*new));
@@ -2806,7 +2734,6 @@ static int bttv_overlay(struct file *file, void *f, unsigned int on)
 
 	/* switch over */
 	retval = bttv_switch_overlay(btv, fh, new);
-	mutex_unlock(&fh->cap.vb_lock);
 	return retval;
 }
 
@@ -2845,7 +2772,6 @@ static int bttv_s_fbuf(struct file *file, void *f,
 	}
 
 	/* ok, accept it */
-	mutex_lock(&fh->cap.vb_lock);
 	btv->fbuf.base       = fb->base;
 	btv->fbuf.fmt.width  = fb->fmt.width;
 	btv->fbuf.fmt.height = fb->fmt.height;
@@ -2877,7 +2803,6 @@ static int bttv_s_fbuf(struct file *file, void *f,
 			retval = bttv_switch_overlay(btv, fh, new);
 		}
 	}
-	mutex_unlock(&fh->cap.vb_lock);
 	return retval;
 }
 
@@ -2956,7 +2881,6 @@ static int bttv_queryctrl(struct file *file, void *priv,
 	     c->id >= V4L2_CID_PRIVATE_LASTP1))
 		return -EINVAL;
 
-	mutex_lock(&btv->lock);
 	if (!btv->volume_gpio && (c->id == V4L2_CID_AUDIO_VOLUME))
 		*c = no_ctl;
 	else {
@@ -2964,7 +2888,6 @@ static int bttv_queryctrl(struct file *file, void *priv,
 
 		*c = (NULL != ctrl) ? *ctrl : no_ctl;
 	}
-	mutex_unlock(&btv->lock);
 
 	return 0;
 }
@@ -2975,10 +2898,8 @@ static int bttv_g_parm(struct file *file, void *f,
 	struct bttv_fh *fh = f;
 	struct bttv *btv = fh->btv;
 
-	mutex_lock(&btv->lock);
 	v4l2_video_std_frame_period(bttv_tvnorms[btv->tvnorm].v4l2_id,
 				    &parm->parm.capture.timeperframe);
-	mutex_unlock(&btv->lock);
 
 	return 0;
 }
@@ -2994,7 +2915,6 @@ static int bttv_g_tuner(struct file *file, void *priv,
 	if (0 != t->index)
 		return -EINVAL;
 
-	mutex_lock(&btv->lock);
 	t->rxsubchans = V4L2_TUNER_SUB_MONO;
 	bttv_call_all(btv, tuner, g_tuner, t);
 	strcpy(t->name, "Television");
@@ -3006,7 +2926,6 @@ static int bttv_g_tuner(struct file *file, void *priv,
 	if (btv->audio_mode_gpio)
 		btv->audio_mode_gpio(btv, t, 0);
 
-	mutex_unlock(&btv->lock);
 	return 0;
 }
 
@@ -3015,9 +2934,7 @@ static int bttv_g_priority(struct file *file, void *f, enum v4l2_priority *p)
 	struct bttv_fh *fh = f;
 	struct bttv *btv = fh->btv;
 
-	mutex_lock(&btv->lock);
 	*p = v4l2_prio_max(&btv->prio);
-	mutex_unlock(&btv->lock);
 
 	return 0;
 }
@@ -3029,9 +2946,7 @@ static int bttv_s_priority(struct file *file, void *f,
 	struct bttv *btv = fh->btv;
 	int	rc;
 
-	mutex_lock(&btv->lock);
 	rc = v4l2_prio_change(&btv->prio, &fh->prio, prio);
-	mutex_unlock(&btv->lock);
 
 	return rc;
 }
@@ -3046,9 +2961,7 @@ static int bttv_cropcap(struct file *file, void *priv,
 	    cap->type != V4L2_BUF_TYPE_VIDEO_OVERLAY)
 		return -EINVAL;
 
-	mutex_lock(&btv->lock);
 	*cap = bttv_tvnorms[btv->tvnorm].cropcap;
-	mutex_unlock(&btv->lock);
 
 	return 0;
 }
@@ -3066,9 +2979,7 @@ static int bttv_g_crop(struct file *file, void *f, struct v4l2_crop *crop)
 	   inconsistent with fh->width or fh->height and apps
 	   do not expect a change here. */
 
-	mutex_lock(&btv->lock);
 	crop->c = btv->crop[!!fh->do_crop].rect;
-	mutex_unlock(&btv->lock);
 
 	return 0;
 }
@@ -3092,17 +3003,14 @@ static int bttv_s_crop(struct file *file, void *f, struct v4l2_crop *crop)
 	/* Make sure tvnorm, vbi_end and the current cropping
 	   parameters remain consistent until we're done. Note
 	   read() may change vbi_end in check_alloc_btres_lock(). */
-	mutex_lock(&btv->lock);
 	retval = v4l2_prio_check(&btv->prio, fh->prio);
 	if (0 != retval) {
-		mutex_unlock(&btv->lock);
 		return retval;
 	}
 
 	retval = -EBUSY;
 
 	if (locked_btres(fh->btv, VIDEO_RESOURCES)) {
-		mutex_unlock(&btv->lock);
 		return retval;
 	}
 
@@ -3114,7 +3022,6 @@ static int bttv_s_crop(struct file *file, void *f, struct v4l2_crop *crop)
 
 	b_top = max(b->top, btv->vbi_end);
 	if (b_top + 32 >= b_bottom) {
-		mutex_unlock(&btv->lock);
 		return retval;
 	}
 
@@ -3137,12 +3044,8 @@ static int bttv_s_crop(struct file *file, void *f, struct v4l2_crop *crop)
 
 	btv->crop[1] = c;
 
-	mutex_unlock(&btv->lock);
-
 	fh->do_crop = 1;
 
-	mutex_lock(&fh->cap.vb_lock);
-
 	if (fh->width < c.min_scaled_width) {
 		fh->width = c.min_scaled_width;
 		btv->init.width = c.min_scaled_width;
@@ -3159,8 +3062,6 @@ static int bttv_s_crop(struct file *file, void *f, struct v4l2_crop *crop)
 		btv->init.height = c.max_scaled_height;
 	}
 
-	mutex_unlock(&fh->cap.vb_lock);
-
 	return 0;
 }
 
@@ -3228,7 +3129,6 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait)
 		return videobuf_poll_stream(file, &fh->vbi, wait);
 	}
 
-	mutex_lock(&fh->cap.vb_lock);
 	if (check_btres(fh,RESOURCE_VIDEO_STREAM)) {
 		/* streaming capture */
 		if (list_empty(&fh->cap.stream))
@@ -3263,7 +3163,6 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait)
 	else
 		rc = 0;
 err:
-	mutex_unlock(&fh->cap.vb_lock);
 	return rc;
 }
 
@@ -3294,23 +3193,11 @@ static int bttv_open(struct file *file)
 		return -ENOMEM;
 	file->private_data = fh;
 
-	/*
-	 * btv is protected by btv->lock mutex, while btv->init and other
-	 * streaming vars are protected by fh->cap.vb_lock. We need to take
-	 * care of both locks to avoid troubles. However, vb_lock is used also
-	 * inside videobuf, without calling buf->lock. So, it is a very bad
-	 * idea to hold both locks at the same time.
-	 * Let's first copy btv->init at fh, holding cap.vb_lock, and then work
-	 * with the rest of init, holding btv->lock.
-	 */
-	mutex_lock(&fh->cap.vb_lock);
 	*fh = btv->init;
-	mutex_unlock(&fh->cap.vb_lock);
 
 	fh->type = type;
 	fh->ov.setup_ok = 0;
 
-	mutex_lock(&btv->lock);
 	v4l2_prio_open(&btv->prio, &fh->prio);
 
 	videobuf_queue_sg_init(&fh->cap, &bttv_video_qops,
@@ -3318,13 +3205,13 @@ static int bttv_open(struct file *file)
 			    V4L2_BUF_TYPE_VIDEO_CAPTURE,
 			    V4L2_FIELD_INTERLACED,
 			    sizeof(struct bttv_buffer),
-			    fh, NULL);
+			    fh, &btv->lock);
 	videobuf_queue_sg_init(&fh->vbi, &bttv_vbi_qops,
 			    &btv->c.pci->dev, &btv->s_lock,
 			    V4L2_BUF_TYPE_VBI_CAPTURE,
 			    V4L2_FIELD_SEQ_TB,
 			    sizeof(struct bttv_buffer),
-			    fh, NULL);
+			    fh, &btv->lock);
 	set_tvnorm(btv,btv->tvnorm);
 	set_input(btv, btv->input, btv->tvnorm);
 
@@ -3347,7 +3234,6 @@ static int bttv_open(struct file *file)
 	bttv_vbi_fmt_reset(&fh->vbi_fmt, btv->tvnorm);
 
 	bttv_field_count(btv);
-	mutex_unlock(&btv->lock);
 	return 0;
 }
 
@@ -3356,7 +3242,6 @@ static int bttv_release(struct file *file)
 	struct bttv_fh *fh = file->private_data;
 	struct bttv *btv = fh->btv;
 
-	mutex_lock(&btv->lock);
 	/* turn off overlay */
 	if (check_btres(fh, RESOURCE_OVERLAY))
 		bttv_switch_overlay(btv,fh,NULL);
@@ -3382,14 +3267,8 @@ static int bttv_release(struct file *file)
 
 	/* free stuff */
 
-	/*
-	 * videobuf uses cap.vb_lock - we should avoid holding btv->lock,
-	 * otherwise we may have dead lock conditions
-	 */
-	mutex_unlock(&btv->lock);
 	videobuf_mmap_free(&fh->cap);
 	videobuf_mmap_free(&fh->vbi);
-	mutex_lock(&btv->lock);
 	v4l2_prio_close(&btv->prio, fh->prio);
 	file->private_data = NULL;
 	kfree(fh);
@@ -3399,7 +3278,6 @@ static int bttv_release(struct file *file)
 
 	if (!btv->users)
 		audio_mute(btv, 1);
-	mutex_unlock(&btv->lock);
 
 	return 0;
 }
@@ -3457,9 +3335,6 @@ static const struct v4l2_ioctl_ops bttv_ioctl_ops = {
 	.vidioc_streamoff               = bttv_streamoff,
 	.vidioc_g_tuner                 = bttv_g_tuner,
 	.vidioc_s_tuner                 = bttv_s_tuner,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf                    = vidiocgmbuf,
-#endif
 	.vidioc_g_crop                  = bttv_g_crop,
 	.vidioc_s_crop                  = bttv_s_crop,
 	.vidioc_g_fbuf                  = bttv_g_fbuf,
@@ -3503,11 +3378,8 @@ static int radio_open(struct file *file)
 	if (unlikely(!fh))
 		return -ENOMEM;
 	file->private_data = fh;
-	mutex_lock(&fh->cap.vb_lock);
 	*fh = btv->init;
-	mutex_unlock(&fh->cap.vb_lock);
 
-	mutex_lock(&btv->lock);
 	v4l2_prio_open(&btv->prio, &fh->prio);
 
 	btv->radio_user++;
@@ -3515,7 +3387,6 @@ static int radio_open(struct file *file)
 	bttv_call_all(btv, tuner, s_radio);
 	audio_input(btv,TVAUDIO_INPUT_RADIO);
 
-	mutex_unlock(&btv->lock);
 	return 0;
 }
 
@@ -3523,17 +3394,15 @@ static int radio_release(struct file *file)
 {
 	struct bttv_fh *fh = file->private_data;
 	struct bttv *btv = fh->btv;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 
-	mutex_lock(&btv->lock);
 	v4l2_prio_close(&btv->prio, fh->prio);
 	file->private_data = NULL;
 	kfree(fh);
 
 	btv->radio_user--;
 
-	bttv_call_all(btv, core, ioctl, RDS_CMD_CLOSE, &cmd);
-	mutex_unlock(&btv->lock);
+	bttv_call_all(btv, core, ioctl, SAA6588_CMD_CLOSE, &cmd);
 
 	return 0;
 }
@@ -3562,7 +3431,6 @@ static int radio_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t)
 		return -EINVAL;
 	if (0 != t->index)
 		return -EINVAL;
-	mutex_lock(&btv->lock);
 	strcpy(t->name, "Radio");
 	t->type = V4L2_TUNER_RADIO;
 
@@ -3571,8 +3439,6 @@ static int radio_g_tuner(struct file *file, void *priv, struct v4l2_tuner *t)
 	if (btv->audio_mode_gpio)
 		btv->audio_mode_gpio(btv, t, 0);
 
-	mutex_unlock(&btv->lock);
-
 	return 0;
 }
 
@@ -3663,13 +3529,13 @@ static ssize_t radio_read(struct file *file, char __user *data,
 {
 	struct bttv_fh *fh = file->private_data;
 	struct bttv *btv = fh->btv;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 	cmd.block_count = count/3;
 	cmd.buffer = data;
 	cmd.instance = file;
 	cmd.result = -ENODEV;
 
-	bttv_call_all(btv, core, ioctl, RDS_CMD_READ, &cmd);
+	bttv_call_all(btv, core, ioctl, SAA6588_CMD_READ, &cmd);
 
 	return cmd.result;
 }
@@ -3678,11 +3544,11 @@ static unsigned int radio_poll(struct file *file, poll_table *wait)
 {
 	struct bttv_fh *fh = file->private_data;
 	struct bttv *btv = fh->btv;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 	cmd.instance = file;
 	cmd.event_list = wait;
 	cmd.result = -ENODEV;
-	bttv_call_all(btv, core, ioctl, RDS_CMD_POLL, &cmd);
+	bttv_call_all(btv, core, ioctl, SAA6588_CMD_POLL, &cmd);
 
 	return cmd.result;
 }
@@ -3693,7 +3559,7 @@ static const struct v4l2_file_operations radio_fops =
 	.open	  = radio_open,
 	.read     = radio_read,
 	.release  = radio_release,
-	.ioctl	  = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 	.poll     = radio_poll,
 };
 
@@ -4153,9 +4019,6 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)
 
 	btv=(struct bttv *)dev_id;
 
-	if (btv->custom_irq)
-		handled = btv->custom_irq(btv);
-
 	count=0;
 	while (1) {
 		/* get/clear interrupt status bits */
@@ -4191,7 +4054,6 @@ static irqreturn_t bttv_irq(int irq, void *dev_id)
 			btv->field_count++;
 
 		if ((astat & BT848_INT_GPINT) && btv->remote) {
-			wake_up(&btv->gpioq);
 			bttv_input_irq(btv);
 		}
 
@@ -4396,7 +4258,6 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 	mutex_init(&btv->lock);
 	spin_lock_init(&btv->s_lock);
 	spin_lock_init(&btv->gpio_lock);
-	init_waitqueue_head(&btv->gpioq);
 	init_waitqueue_head(&btv->i2c_queue);
 	INIT_LIST_HEAD(&btv->c.subs);
 	INIT_LIST_HEAD(&btv->capture);
@@ -4574,6 +4435,9 @@ static void __devexit bttv_remove(struct pci_dev *pci_dev)
 	if (bttv_verbose)
 		printk("bttv%d: unloading\n",btv->c.nr);
 
+	if (bttv_tvcards[btv->c.type].has_dvb)
+		flush_request_modules(btv);
+
 	/* shutdown everything (DMA+IRQs) */
 	btand(~15, BT848_GPIO_DMA_CTL);
 	btwrite(0, BT848_INT_MASK);
@@ -4584,7 +4448,6 @@ static void __devexit bttv_remove(struct pci_dev *pci_dev)
 
 	/* tell gpio modules we are leaving ... */
 	btv->shutdown=1;
-	wake_up(&btv->gpioq);
 	bttv_input_fini(btv);
 	bttv_sub_del_devices(&btv->c);
 
diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c
index 6bf05a7dc5f..e8b64bca9db 100644
--- a/drivers/media/video/bt8xx/bttv-input.c
+++ b/drivers/media/video/bt8xx/bttv-input.c
@@ -31,15 +31,9 @@
 
 static int ir_debug;
 module_param(ir_debug, int, 0644);
-static int repeat_delay = 500;
-module_param(repeat_delay, int, 0644);
-static int repeat_period = 33;
-module_param(repeat_period, int, 0644);
 
 static int ir_rc5_remote_gap = 885;
 module_param(ir_rc5_remote_gap, int, 0644);
-static int ir_rc5_key_timeout = 200;
-module_param(ir_rc5_key_timeout, int, 0644);
 
 #undef dprintk
 #define dprintk(arg...) do {	\
@@ -55,7 +49,7 @@ module_param(ir_rc5_key_timeout, int, 0644);
 
 static void ir_handle_key(struct bttv *btv)
 {
-	struct card_ir *ir = btv->remote;
+	struct bttv_ir *ir = btv->remote;
 	u32 gpio,data;
 
 	/* read gpio value */
@@ -74,23 +68,22 @@ static void ir_handle_key(struct bttv *btv)
 		(gpio & ir->mask_keydown) ? " down" : "",
 		(gpio & ir->mask_keyup)   ? " up"   : "");
 
-	if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
-	    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
-		ir_input_keydown(ir->dev, &ir->ir, data);
+	if ((ir->mask_keydown && (gpio & ir->mask_keydown)) ||
+	    (ir->mask_keyup   && !(gpio & ir->mask_keyup))) {
+		rc_keydown_notimeout(ir->dev, data, 0);
 	} else {
 		/* HACK: Probably, ir->mask_keydown is missing
 		   for this board */
 		if (btv->c.type == BTTV_BOARD_WINFAST2000)
-			ir_input_keydown(ir->dev, &ir->ir, data);
+			rc_keydown_notimeout(ir->dev, data, 0);
 
-		ir_input_nokey(ir->dev,&ir->ir);
+		rc_keyup(ir->dev);
 	}
-
 }
 
 static void ir_enltv_handle_key(struct bttv *btv)
 {
-	struct card_ir *ir = btv->remote;
+	struct bttv_ir *ir = btv->remote;
 	u32 gpio, data, keyup;
 
 	/* read gpio value */
@@ -107,9 +100,9 @@ static void ir_enltv_handle_key(struct bttv *btv)
 			gpio, data,
 			(gpio & ir->mask_keyup) ? " up" : "up/down");
 
-		ir_input_keydown(ir->dev, &ir->ir, data);
+		rc_keydown_notimeout(ir->dev, data, 0);
 		if (keyup)
-			ir_input_nokey(ir->dev, &ir->ir);
+			rc_keyup(ir->dev);
 	} else {
 		if ((ir->last_gpio & 1 << 31) == keyup)
 			return;
@@ -119,26 +112,30 @@ static void ir_enltv_handle_key(struct bttv *btv)
 			(gpio & ir->mask_keyup) ? " up" : "down");
 
 		if (keyup)
-			ir_input_nokey(ir->dev, &ir->ir);
+			rc_keyup(ir->dev);
 		else
-			ir_input_keydown(ir->dev, &ir->ir, data);
+			rc_keydown_notimeout(ir->dev, data, 0);
 	}
 
 	ir->last_gpio = data | keyup;
 }
 
+static int bttv_rc5_irq(struct bttv *btv);
+
 void bttv_input_irq(struct bttv *btv)
 {
-	struct card_ir *ir = btv->remote;
+	struct bttv_ir *ir = btv->remote;
 
-	if (!ir->polling)
+	if (ir->rc5_gpio)
+		bttv_rc5_irq(btv);
+	else if (!ir->polling)
 		ir_handle_key(btv);
 }
 
 static void bttv_input_timer(unsigned long data)
 {
 	struct bttv *btv = (struct bttv*)data;
-	struct card_ir *ir = btv->remote;
+	struct bttv_ir *ir = btv->remote;
 
 	if (btv->c.type == BTTV_BOARD_ENLTV_FM_2)
 		ir_enltv_handle_key(btv);
@@ -147,11 +144,109 @@ static void bttv_input_timer(unsigned long data)
 	mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
 }
 
-/* ---------------------------------------------------------------*/
+/*
+ * FIXME: Nebula digi uses the legacy way to decode RC5, instead of relying
+ * on the rc-core way. As we need to be sure that both IRQ transitions are
+ * properly triggered, Better to touch it only with this hardware for
+ * testing.
+ */
+
+#define RC5_START(x)	(((x) >> 12) & 3)
+#define RC5_TOGGLE(x)	(((x) >> 11) & 1)
+#define RC5_ADDR(x)	(((x) >> 6) & 31)
+#define RC5_INSTR(x)	((x) & 63)
+
+/* decode raw bit pattern to RC5 code */
+static u32 bttv_rc5_decode(unsigned int code)
+{
+	unsigned int org_code = code;
+	unsigned int pair;
+	unsigned int rc5 = 0;
+	int i;
+
+	for (i = 0; i < 14; ++i) {
+		pair = code & 0x3;
+		code >>= 2;
+
+		rc5 <<= 1;
+		switch (pair) {
+		case 0:
+		case 2:
+			break;
+		case 1:
+			rc5 |= 1;
+		break;
+		case 3:
+			dprintk(KERN_INFO DEVNAME ":rc5_decode(%x) bad code\n",
+				org_code);
+			return 0;
+		}
+	}
+	dprintk(KERN_INFO DEVNAME ":"
+		"code=%x, rc5=%x, start=%x, toggle=%x, address=%x, "
+		"instr=%x\n", rc5, org_code, RC5_START(rc5),
+		RC5_TOGGLE(rc5), RC5_ADDR(rc5), RC5_INSTR(rc5));
+	return rc5;
+}
+
+static void bttv_rc5_timer_end(unsigned long data)
+{
+	struct bttv_ir *ir = (struct bttv_ir *)data;
+	struct timeval tv;
+	unsigned long current_jiffies;
+	u32 gap;
+	u32 rc5 = 0;
+
+	/* get time */
+	current_jiffies = jiffies;
+	do_gettimeofday(&tv);
+
+	/* avoid overflow with gap >1s */
+	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
+		gap = 200000;
+	} else {
+		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
+		    tv.tv_usec - ir->base_time.tv_usec;
+	}
+
+	/* signal we're ready to start a new code */
+	ir->active = false;
+
+	/* Allow some timer jitter (RC5 is ~24ms anyway so this is ok) */
+	if (gap < 28000) {
+		dprintk(KERN_INFO DEVNAME ": spurious timer_end\n");
+		return;
+	}
+
+	if (ir->last_bit < 20) {
+		/* ignore spurious codes (caused by light/other remotes) */
+		dprintk(KERN_INFO DEVNAME ": short code: %x\n", ir->code);
+	} else {
+		ir->code = (ir->code << ir->shift_by) | 1;
+		rc5 = bttv_rc5_decode(ir->code);
+
+		/* two start bits? */
+		if (RC5_START(rc5) != ir->start) {
+			printk(KERN_INFO DEVNAME ":"
+			       " rc5 start bits invalid: %u\n", RC5_START(rc5));
+
+			/* right address? */
+		} else if (RC5_ADDR(rc5) == ir->addr) {
+			u32 toggle = RC5_TOGGLE(rc5);
+			u32 instr = RC5_INSTR(rc5);
+
+			/* Good code */
+			rc_keydown(ir->dev, instr, toggle);
+			dprintk(KERN_INFO DEVNAME ":"
+				" instruction %x, toggle %x\n",
+				instr, toggle);
+		}
+	}
+}
 
 static int bttv_rc5_irq(struct bttv *btv)
 {
-	struct card_ir *ir = btv->remote;
+	struct bttv_ir *ir = btv->remote;
 	struct timeval tv;
 	u32 gpio;
 	u32 gap;
@@ -160,10 +255,6 @@ static int bttv_rc5_irq(struct bttv *btv)
 	/* read gpio port */
 	gpio = bttv_gpio_read(&btv->c);
 
-	/* remote IRQ? */
-	if (!(gpio & 0x20))
-		return 0;
-
 	/* get time of bit */
 	current_jiffies = jiffies;
 	do_gettimeofday(&tv);
@@ -176,6 +267,13 @@ static int bttv_rc5_irq(struct bttv *btv)
 		    tv.tv_usec - ir->base_time.tv_usec;
 	}
 
+	dprintk(KERN_INFO DEVNAME ": RC5 IRQ: gap %d us for %s\n",
+		gap, (gpio & 0x20) ? "mark" : "space");
+
+	/* remote IRQ? */
+	if (!(gpio & 0x20))
+		return 0;
+
 	/* active code => add bit */
 	if (ir->active) {
 		/* only if in the code (otherwise spurious IRQ or timer
@@ -187,13 +285,12 @@ static int bttv_rc5_irq(struct bttv *btv)
 		}
 		/* starting new code */
 	} else {
-		ir->active = 1;
+		ir->active = true;
 		ir->code = 0;
 		ir->base_time = tv;
 		ir->last_bit = 0;
 
-		mod_timer(&ir->timer_end,
-			  current_jiffies + msecs_to_jiffies(30));
+		mod_timer(&ir->timer, current_jiffies + msecs_to_jiffies(30));
 	}
 
 	/* toggle GPIO pin 4 to reset the irq */
@@ -204,7 +301,7 @@ static int bttv_rc5_irq(struct bttv *btv)
 
 /* ---------------------------------------------------------------------- */
 
-static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
+static void bttv_ir_start(struct bttv *btv, struct bttv_ir *ir)
 {
 	if (ir->polling) {
 		setup_timer(&ir->timer, bttv_input_timer, (unsigned long)btv);
@@ -212,33 +309,23 @@ static void bttv_ir_start(struct bttv *btv, struct card_ir *ir)
 		add_timer(&ir->timer);
 	} else if (ir->rc5_gpio) {
 		/* set timer_end for code completion */
-		init_timer(&ir->timer_end);
-		ir->timer_end.function = ir_rc5_timer_end;
-		ir->timer_end.data = (unsigned long)ir;
-
-		init_timer(&ir->timer_keyup);
-		ir->timer_keyup.function = ir_rc5_timer_keyup;
-		ir->timer_keyup.data = (unsigned long)ir;
+		setup_timer(&ir->timer, bttv_rc5_timer_end, (unsigned long)ir);
 		ir->shift_by = 1;
 		ir->start = 3;
 		ir->addr = 0x0;
-		ir->rc5_key_timeout = ir_rc5_key_timeout;
 		ir->rc5_remote_gap = ir_rc5_remote_gap;
 	}
 }
 
 static void bttv_ir_stop(struct bttv *btv)
 {
-	if (btv->remote->polling) {
+	if (btv->remote->polling)
 		del_timer_sync(&btv->remote->timer);
-		flush_scheduled_work();
-	}
 
 	if (btv->remote->rc5_gpio) {
 		u32 gpio;
 
-		del_timer_sync(&btv->remote->timer_end);
-		flush_scheduled_work();
+		del_timer_sync(&btv->remote->timer);
 
 		gpio = bttv_gpio_read(&btv->c);
 		bttv_gpio_write(&btv->c, gpio & ~(1 << 4));
@@ -264,6 +351,18 @@ static int get_key_pv951(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 		return 0;
 	dprintk(KERN_INFO DEVNAME ": key %02x\n", b);
 
+	/*
+	 * NOTE:
+	 * lirc_i2c maps the pv951 code as:
+	 *	addr = 0x61D6
+	 * 	cmd = bit_reverse (b)
+	 * So, it seems that this device uses NEC extended
+	 * I decided to not fix the table, due to two reasons:
+	 * 	1) Without the actual device, this is only a guess;
+	 * 	2) As the addr is not reported via I2C, nor can be changed,
+	 * 	   the device is bound to the vendor-provided RC.
+	 */
+
 	*ir_key = b;
 	*ir_raw = b;
 	return 1;
@@ -290,16 +389,15 @@ void __devinit init_bttv_i2c_ir(struct bttv *btv)
 		btv->init_data.name = "PV951";
 		btv->init_data.get_key = get_key_pv951;
 		btv->init_data.ir_codes = RC_MAP_PV951;
-		btv->init_data.type = IR_TYPE_OTHER;
 		info.addr = 0x4b;
 		break;
 	default:
 		/*
 		 * The external IR receiver is at i2c address 0x34 (0x35 for
-                 * reads).  Future Hauppauge cards will have an internal
-                 * receiver at 0x30 (0x31 for reads).  In theory, both can be
-                 * fitted, and Hauppauge suggest an external overrides an
-                 * internal.
+		 * reads).  Future Hauppauge cards will have an internal
+		 * receiver at 0x30 (0x31 for reads).  In theory, both can be
+		 * fitted, and Hauppauge suggest an external overrides an
+		 * internal.
 		 * That's why we probe 0x1a (~0x34) first. CB
 		 */
 
@@ -324,18 +422,17 @@ int __devexit fini_bttv_i2c(struct bttv *btv)
 
 int bttv_input_init(struct bttv *btv)
 {
-	struct card_ir *ir;
+	struct bttv_ir *ir;
 	char *ir_codes = NULL;
-	struct input_dev *input_dev;
-	u64 ir_type = IR_TYPE_OTHER;
+	struct rc_dev *rc;
 	int err = -ENOMEM;
 
 	if (!btv->has_remote)
 		return -ENODEV;
 
 	ir = kzalloc(sizeof(*ir),GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev)
+	rc = rc_allocate_device();
+	if (!ir || !rc)
 		goto err_out_free;
 
 	/* detect & configure */
@@ -398,8 +495,7 @@ int bttv_input_init(struct bttv *btv)
 		break;
 	case BTTV_BOARD_NEBULA_DIGITV:
 		ir_codes = RC_MAP_NEBULA;
-		btv->custom_irq = bttv_rc5_irq;
-		ir->rc5_gpio = 1;
+		ir->rc5_gpio = true;
 		break;
 	case BTTV_BOARD_MACHTV_MAGICTV:
 		ir_codes         = RC_MAP_APAC_VIEWCOMP;
@@ -441,48 +537,43 @@ int bttv_input_init(struct bttv *btv)
 	}
 
 	/* init input device */
-	ir->dev = input_dev;
+	ir->dev = rc;
 
 	snprintf(ir->name, sizeof(ir->name), "bttv IR (card=%d)",
 		 btv->c.type);
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
 		 pci_name(btv->c.pci));
 
-	err = ir_input_init(input_dev, &ir->ir, ir_type);
-	if (err < 0)
-		goto err_out_free;
-
-	input_dev->name = ir->name;
-	input_dev->phys = ir->phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	rc->input_id.bustype = BUS_PCI;
+	rc->input_id.version = 1;
 	if (btv->c.pci->subsystem_vendor) {
-		input_dev->id.vendor  = btv->c.pci->subsystem_vendor;
-		input_dev->id.product = btv->c.pci->subsystem_device;
+		rc->input_id.vendor  = btv->c.pci->subsystem_vendor;
+		rc->input_id.product = btv->c.pci->subsystem_device;
 	} else {
-		input_dev->id.vendor  = btv->c.pci->vendor;
-		input_dev->id.product = btv->c.pci->device;
+		rc->input_id.vendor  = btv->c.pci->vendor;
+		rc->input_id.product = btv->c.pci->device;
 	}
-	input_dev->dev.parent = &btv->c.pci->dev;
+	rc->dev.parent = &btv->c.pci->dev;
+	rc->map_name = ir_codes;
+	rc->driver_name = MODULE_NAME;
 
 	btv->remote = ir;
 	bttv_ir_start(btv, ir);
 
 	/* all done */
-	err = ir_input_register(btv->remote->dev, ir_codes, NULL, MODULE_NAME);
+	err = rc_register_device(rc);
 	if (err)
 		goto err_out_stop;
 
-	/* the remote isn't as bouncy as a keyboard */
-	ir->dev->rep[REP_DELAY] = repeat_delay;
-	ir->dev->rep[REP_PERIOD] = repeat_period;
-
 	return 0;
 
  err_out_stop:
 	bttv_ir_stop(btv);
 	btv->remote = NULL;
  err_out_free:
+	rc_free_device(rc);
 	kfree(ir);
 	return err;
 }
@@ -493,7 +584,7 @@ void bttv_input_fini(struct bttv *btv)
 		return;
 
 	bttv_ir_stop(btv);
-	ir_input_unregister(btv->remote->dev);
+	rc_unregister_device(btv->remote->dev);
 	kfree(btv->remote);
 	btv->remote = NULL;
 }
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index 6fd2a8ebda1..fd62bf15d77 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -17,7 +17,6 @@
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 #include <media/v4l2-device.h>
-#include <media/ir-common.h>
 #include <media/i2c-addr.h>
 #include <media/tuner.h>
 
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index d1e26a448ed..9b776faf074 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -41,7 +41,7 @@
 #include <linux/device.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/tveeprom.h>
-#include <media/ir-common.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 
 #include "bt848.h"
@@ -120,6 +120,33 @@ struct bttv_format {
 	int  hshift,vshift;   /* for planar modes   */
 };
 
+struct bttv_ir {
+	struct rc_dev           *dev;
+	struct timer_list       timer;
+
+	char                    name[32];
+	char                    phys[32];
+
+	/* Usual gpio signalling */
+	u32                     mask_keycode;
+	u32                     mask_keydown;
+	u32                     mask_keyup;
+	u32                     polling;
+	u32                     last_gpio;
+	int                     shift_by;
+	int                     start; // What should RC5_START() be
+	int                     addr; // What RC5_ADDR() should be.
+	int                     rc5_remote_gap;
+
+	/* RC5 gpio */
+	bool			rc5_gpio;   /* Is RC5 legacy GPIO enabled? */
+	u32                     last_bit;   /* last raw bit seen */
+	u32                     code;       /* raw code under construction */
+	struct timeval          base_time;  /* time of last seen code */
+	bool                    active;     /* building raw code */
+};
+
+
 /* ---------------------------------------------------------- */
 
 struct bttv_geometry {
@@ -305,7 +332,6 @@ struct bttv_pll_info {
 /* for gpio-connected remote control */
 struct bttv_input {
 	struct input_dev      *dev;
-	struct ir_input_state ir;
 	char                  name[32];
 	char                  phys[32];
 	u32                   mask_keycode;
@@ -338,12 +364,10 @@ struct bttv {
 	struct bttv_pll_info pll;
 	int triton1;
 	int gpioirq;
-	int (*custom_irq)(struct bttv *btv);
 
 	int use_i2c_hw;
 
 	/* old gpio interface */
-	wait_queue_head_t gpioq;
 	int shutdown;
 
 	void (*volume_gpio)(struct bttv *btv, __u16 volume);
@@ -368,7 +392,7 @@ struct bttv {
 
 	/* infrared remote */
 	int has_remote;
-	struct card_ir *remote;
+	struct bttv_ir *remote;
 
 	/* I2C remote data */
 	struct IR_i2c_init_data    init_data;
diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index 935e0c9a967..c1193506131 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -860,7 +860,7 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 
 static const struct v4l2_file_operations qcam_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl          = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 	.read		= qcam_read,
 };
 
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index 6e4b19698c1..24fc00965a1 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -718,7 +718,7 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 
 static const struct v4l2_file_operations qcam_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.read		= qcam_read,
 };
 
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 2934770dacc..789087cd6a9 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -859,8 +859,6 @@ static int cafe_cam_configure(struct cafe_camera *cam)
 	struct v4l2_mbus_framefmt mbus_fmt;
 	int ret;
 
-	if (cam->state != S_IDLE)
-		return -EINVAL;
 	v4l2_fill_mbus_format(&mbus_fmt, &cam->pix_format, cam->mbus_code);
 	ret = sensor_call(cam, core, init, 0);
 	if (ret == 0)
@@ -1775,7 +1773,7 @@ static const struct v4l2_file_operations cafe_v4l_fops = {
 	.read = cafe_v4l_read,
 	.poll = cafe_v4l_poll,
 	.mmap = cafe_v4l_mmap,
-	.ioctl = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops cafe_v4l_ioctl_ops = {
@@ -2065,8 +2063,8 @@ static int cafe_pci_probe(struct pci_dev *pdev,
 		sensor_cfg.clock_speed = 45;
 
 	cam->sensor_addr = 0x42;
-	cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, &cam->i2c_adapter,
-			NULL, "ov7670", cam->sensor_addr, NULL);
+	cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter,
+			"ov7670", 0, &sensor_cfg, cam->sensor_addr, NULL);
 	if (cam->sensor == NULL) {
 		ret = -ENODEV;
 		goto out_smbus;
@@ -2196,12 +2194,13 @@ static int cafe_pci_resume(struct pci_dev *pdev)
 		return ret;
 	}
 	cafe_ctlr_init(cam);
-	cafe_ctlr_power_down(cam);
 
 	mutex_lock(&cam->s_mutex);
 	if (cam->users > 0) {
 		cafe_ctlr_power_up(cam);
 		__cafe_cam_reset(cam);
+	} else {
+		cafe_ctlr_power_down(cam);
 	}
 	mutex_unlock(&cam->s_mutex);
 
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 46b433bbf2c..7edf80b0d01 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -419,28 +419,6 @@ static int sync(struct camera_data *cam, int frame_nr)
 
 /******************************************************************************
  *
- *  ioctl_get_mbuf
- *
- *****************************************************************************/
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int ioctl_get_mbuf(void *arg, struct camera_data *cam)
-{
-	struct video_mbuf *vm;
-	int i;
-	vm = arg;
-
-	memset(vm, 0, sizeof(*vm));
-	vm->size = cam->frame_size*cam->num_frames;
-	vm->frames = cam->num_frames;
-	for (i = 0; i < cam->num_frames; i++)
-		vm->offsets[i] = cam->frame_size * i;
-
-	return 0;
-}
-#endif
-
-/******************************************************************************
- *
  *  ioctl_set_gpio
  *
  *****************************************************************************/
@@ -1380,17 +1358,6 @@ static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		}
 		break;
 	}
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCGMBUF:
-	{
-		struct cpia2_fh *fh = file->private_data;
-		if(fh->prio != V4L2_PRIORITY_RECORD) {
-			mutex_unlock(&cam->busy_lock);
-			return -EBUSY;
-		}
-		break;
-	}
-#endif
 	default:
 		break;
 	}
@@ -1400,11 +1367,6 @@ static long cpia2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	case CPIA2_IOC_SET_GPIO:
 		retval = ioctl_set_gpio(arg, cam);
 		break;
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCGMBUF:	/* mmap interface */
-		retval = ioctl_get_mbuf(arg, cam);
-		break;
-#endif
 	case VIDIOC_QUERYCAP:
 		retval = ioctl_querycap(arg,cam);
 		break;
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index 76c054d1eef..d9d2f6ad6ff 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -1,9 +1,8 @@
 config VIDEO_CX18
 	tristate "Conexant cx23418 MPEG encoder support"
 	depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
-	depends on INPUT	# due to VIDEO_IR
 	select I2C_ALGOBIT
-	depends on VIDEO_IR
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
diff --git a/drivers/media/video/cx18/cx18-alsa-pcm.c b/drivers/media/video/cx18/cx18-alsa-pcm.c
index 8f55692db36..82d195be919 100644
--- a/drivers/media/video/cx18/cx18-alsa-pcm.c
+++ b/drivers/media/video/cx18/cx18-alsa-pcm.c
@@ -218,7 +218,13 @@ static int snd_cx18_pcm_capture_close(struct snd_pcm_substream *substream)
 static int snd_cx18_pcm_ioctl(struct snd_pcm_substream *substream,
 		     unsigned int cmd, void *arg)
 {
-	return snd_pcm_lib_ioctl(substream, cmd, arg);
+	struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+	int ret;
+
+	snd_cx18_lock(cxsc);
+	ret = snd_pcm_lib_ioctl(substream, cmd, arg);
+	snd_cx18_unlock(cxsc);
+	return ret;
 }
 
 
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index fe1090940b0..87177733cf9 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = {
 	.tv    = { 0x61, 0x60, I2C_CLIENT_END },
 };
 
-/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ 
+/* Please add new PCI IDs to: http://pci-ids.ucw.cz/
    This keeps the PCI ID database up to date. Note that the entries
    must be added under vendor 0x4444 (Conexant) as subsystem IDs.
    New vendor IDs should still be added to the vendor ID list. */
@@ -251,6 +251,66 @@ static const struct cx18_card cx18_card_mpc718 = {
 
 /* ------------------------------------------------------------------------- */
 
+/* GoTView PCI */
+
+static const struct cx18_card_pci_info cx18_pci_gotview_dvd3[] = {
+	{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_GOTVIEW, 0x3343 },
+	{ 0, 0, 0 }
+};
+
+static const struct cx18_card cx18_card_gotview_dvd3 = {
+	.type = CX18_CARD_GOTVIEW_PCI_DVD3,
+	.name = "GoTView PCI DVD3 Hybrid",
+	.comment = "Experimenters needed for device to work well.\n"
+		  "\tTo help, mail the ivtv-devel list (www.ivtvdriver.org).\n",
+	.v4l2_capabilities = CX18_CAP_ENCODER,
+	.hw_audio_ctrl = CX18_HW_418_AV,
+	.hw_muxer = CX18_HW_GPIO_MUX,
+	.hw_all = CX18_HW_TVEEPROM | CX18_HW_418_AV | CX18_HW_TUNER |
+		  CX18_HW_GPIO_MUX | CX18_HW_DVB | CX18_HW_GPIO_RESET_CTRL,
+	.video_inputs = {
+		{ CX18_CARD_INPUT_VID_TUNER,  0, CX18_AV_COMPOSITE2 },
+		{ CX18_CARD_INPUT_SVIDEO1,    1,
+				CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 },
+		{ CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 },
+		{ CX18_CARD_INPUT_SVIDEO2,    2,
+				CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 },
+		{ CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 },
+	},
+	.audio_inputs = {
+		{ CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5,        0 },
+		{ CX18_CARD_INPUT_LINE_IN1,  CX18_AV_AUDIO_SERIAL1, 1 },
+		{ CX18_CARD_INPUT_LINE_IN2,  CX18_AV_AUDIO_SERIAL2, 1 },
+	},
+	.tuners = {
+		/* XC3028 tuner */
+		{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
+	},
+	/* FIXME - the FM radio is just a guess and driver doesn't use SIF */
+	.radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 2 },
+	.ddr = {
+		/* Hynix HY5DU283222B DDR RAM */
+		.chip_config = 0x303,
+		.refresh = 0x3bd,
+		.timing1 = 0x36320966,
+		.timing2 = 0x1f,
+		.tune_lane = 0,
+		.initial_emrs = 2,
+	},
+	.gpio_init.initial_value = 0x1,
+	.gpio_init.direction = 0x3,
+
+	.gpio_audio_input = { .mask   = 0x3,
+			      .tuner  = 0x1,
+			      .linein = 0x2,
+			      .radio  = 0x1 },
+	.xceive_pin = 0,
+	.pci_list = cx18_pci_gotview_dvd3,
+	.i2c = &cx18_i2c_std,
+};
+
+/* ------------------------------------------------------------------------- */
+
 /* Conexant Raptor PAL/SECAM: note that this card is analog only! */
 
 static const struct cx18_card_pci_info cx18_pci_cnxt_raptor_pal[] = {
@@ -463,6 +523,7 @@ static const struct cx18_card *cx18_card_list[] = {
 	&cx18_card_toshiba_qosmio_dvbt,
 	&cx18_card_leadtek_pvr2100,
 	&cx18_card_leadtek_dvr3100h,
+	&cx18_card_gotview_dvd3
 };
 
 const struct cx18_card *cx18_get_card(u16 index)
@@ -485,7 +546,6 @@ int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input)
 		"Component 1"
 	};
 
-	memset(input, 0, sizeof(*input));
 	if (index >= cx->nof_inputs)
 		return -EINVAL;
 	input->index = index;
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 67043c7b452..97d7b7e100a 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -108,7 +108,7 @@ static int cx18_try_ctrl(struct file *file, void *fh,
 					struct v4l2_ext_control *vctrl)
 {
 	struct v4l2_queryctrl qctrl;
-	const char **menu_items = NULL;
+	const char * const *menu_items = NULL;
 	int err;
 
 	qctrl.id = vctrl->id;
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index df60f27337c..133ec2bac18 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -156,6 +156,7 @@ MODULE_PARM_DESC(cardtype,
 		 "\t\t\t 6 = Toshiba Qosmio DVB-T/Analog\n"
 		 "\t\t\t 7 = Leadtek WinFast PVR2100\n"
 		 "\t\t\t 8 = Leadtek WinFast DVR3100 H\n"
+		 "\t\t\t 9 = GoTView PCI DVD3 Hybrid\n"
 		 "\t\t\t 0 = Autodetect (default)\n"
 		 "\t\t\t-1 = Ignore this card\n\t\t");
 MODULE_PARM_DESC(pal, "Set PAL standard: B, G, H, D, K, I, M, N, Nc, 60");
@@ -266,8 +267,14 @@ static void request_modules(struct cx18 *dev)
 	INIT_WORK(&dev->request_module_wk, request_module_async);
 	schedule_work(&dev->request_module_wk);
 }
+
+static void flush_request_modules(struct cx18 *dev)
+{
+	flush_work_sync(&dev->request_module_wk);
+}
 #else
 #define request_modules(dev)
+#define flush_request_modules(dev)
 #endif /* CONFIG_MODULES */
 
 /* Generic utility functions */
@@ -333,6 +340,7 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv)
 		tveeprom_hauppauge_analog(&c, tv, eedata);
 		break;
 	case CX18_CARD_YUAN_MPC718:
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
 		tv->model = 0x718;
 		cx18_eeprom_dump(cx, eedata, sizeof(eedata));
 		CX18_INFO("eeprom PCI ID: %02x%02x:%02x%02x\n",
@@ -923,8 +931,13 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev,
 	cx->enc_mem = ioremap_nocache(cx->base_addr + CX18_MEM_OFFSET,
 				       CX18_MEM_SIZE);
 	if (!cx->enc_mem) {
-		CX18_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
-		CX18_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
+		CX18_ERR("ioremap failed. Can't get a window into CX23418 "
+			 "memory and register space\n");
+		CX18_ERR("Each capture card with a CX23418 needs 64 MB of "
+			 "vmalloc address space for the window\n");
+		CX18_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
+		CX18_ERR("Use the vmalloc= kernel command line option to set "
+			 "VmallocTotal to a larger value\n");
 		retval = -ENOMEM;
 		goto free_mem;
 	}
@@ -1226,6 +1239,8 @@ static void cx18_remove(struct pci_dev *pci_dev)
 
 	CX18_DEBUG_INFO("Removing Card\n");
 
+	flush_request_modules(cx);
+
 	/* Stop all captures */
 	CX18_DEBUG_INFO("Stopping all streams\n");
 	if (atomic_read(&cx->tot_capturing) > 0)
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 77be58c1096..f6f3e50d4bd 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -84,7 +84,8 @@
 #define CX18_CARD_TOSHIBA_QOSMIO_DVBT 5 /* Toshiba Qosmio Interal DVB-T/Analog*/
 #define CX18_CARD_LEADTEK_PVR2100     6 /* Leadtek WinFast PVR2100 */
 #define CX18_CARD_LEADTEK_DVR3100H    7 /* Leadtek WinFast DVR3100 H */
-#define CX18_CARD_LAST 		      7
+#define CX18_CARD_GOTVIEW_PCI_DVD3    8 /* GoTView PCI DVD3 Hybrid */
+#define CX18_CARD_LAST		      8
 
 #define CX18_ENC_STREAM_TYPE_MPG  0
 #define CX18_ENC_STREAM_TYPE_TS   1
@@ -106,6 +107,7 @@
 #define CX18_PCI_ID_CONEXANT		0x14f1
 #define CX18_PCI_ID_TOSHIBA		0x1179
 #define CX18_PCI_ID_LEADTEK		0x107D
+#define CX18_PCI_ID_GOTVIEW		0x5854
 
 /* ======================================================================== */
 /* ========================== START USER SETTABLE DMA VARIABLES =========== */
@@ -323,7 +325,10 @@ struct cx18_queue {
 	spinlock_t lock;
 };
 
+struct cx18_stream; /* forward reference */
+
 struct cx18_dvb {
+	struct cx18_stream *stream;
 	struct dmx_frontend hw_frontend;
 	struct dmx_frontend mem_frontend;
 	struct dmxdev dmxdev;
@@ -363,9 +368,10 @@ struct cx18_in_work_order {
 #define CX18_INVALID_TASK_HANDLE 0xffffffff
 
 struct cx18_stream {
-	/* These first four fields are always set, even if the stream
+	/* These first five fields are always set, even if the stream
 	   is not actually created. */
 	struct video_device *video_dev;	/* NULL when stream not created */
+	struct cx18_dvb *dvb;		/* DVB / Digital Transport */
 	struct cx18 *cx; 		/* for ease of use */
 	const char *name;		/* name of the stream */
 	int type;			/* stream type */
@@ -395,9 +401,6 @@ struct cx18_stream {
 	struct cx18_queue q_idle;	/* idle - not in rotation */
 
 	struct work_struct out_work_order;
-
-	/* DVB / Digital Transport */
-	struct cx18_dvb dvb;
 };
 
 struct cx18_open_id {
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 6d19f040d70..f0381d62518 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -137,7 +137,7 @@ static int yuan_mpc718_mt352_init(struct dvb_frontend *fe)
 {
 	struct cx18_dvb *dvb = container_of(fe->dvb,
 					    struct cx18_dvb, dvb_adapter);
-	struct cx18_stream *stream = container_of(dvb, struct cx18_stream, dvb);
+	struct cx18_stream *stream = dvb->stream;
 	const struct firmware *fw = NULL;
 	int ret;
 	int i;
@@ -203,6 +203,14 @@ static struct zl10353_config yuan_mpc718_zl10353_demod = {
 	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
 };
 
+static struct zl10353_config gotview_dvd3_zl10353_demod = {
+	.demod_address         = 0x1e >> 1, /* Datasheet suggested straps */
+	.if2                   = 45600,     /* 4.560 MHz IF from the XC3028 */
+	.parallel_ts           = 1,         /* Not a serial TS */
+	.no_tuner              = 1,         /* XC3028 is not behind the gate */
+	.disable_i2c_gate_ctrl = 1,         /* Disable the I2C gate */
+};
+
 static int dvb_register(struct cx18_stream *stream);
 
 /* Kernel DVB framework calls this when the feed needs to start.
@@ -247,6 +255,7 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
 
 	case CX18_CARD_LEADTEK_DVR3100H:
 	case CX18_CARD_YUAN_MPC718:
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
 	default:
 		/* Assumption - Parallel transport - Signalling
 		 * undefined or default.
@@ -257,22 +266,22 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
 	if (!demux->dmx.frontend)
 		return -EINVAL;
 
-	mutex_lock(&stream->dvb.feedlock);
-	if (stream->dvb.feeding++ == 0) {
+	mutex_lock(&stream->dvb->feedlock);
+	if (stream->dvb->feeding++ == 0) {
 		CX18_DEBUG_INFO("Starting Transport DMA\n");
 		mutex_lock(&cx->serialize_lock);
 		set_bit(CX18_F_S_STREAMING, &stream->s_flags);
 		ret = cx18_start_v4l2_encode_stream(stream);
 		if (ret < 0) {
 			CX18_DEBUG_INFO("Failed to start Transport DMA\n");
-			stream->dvb.feeding--;
-			if (stream->dvb.feeding == 0)
+			stream->dvb->feeding--;
+			if (stream->dvb->feeding == 0)
 				clear_bit(CX18_F_S_STREAMING, &stream->s_flags);
 		}
 		mutex_unlock(&cx->serialize_lock);
 	} else
 		ret = 0;
-	mutex_unlock(&stream->dvb.feedlock);
+	mutex_unlock(&stream->dvb->feedlock);
 
 	return ret;
 }
@@ -290,15 +299,15 @@ static int cx18_dvb_stop_feed(struct dvb_demux_feed *feed)
 		CX18_DEBUG_INFO("Stop feed: pid = 0x%x index = %d\n",
 				feed->pid, feed->index);
 
-		mutex_lock(&stream->dvb.feedlock);
-		if (--stream->dvb.feeding == 0) {
+		mutex_lock(&stream->dvb->feedlock);
+		if (--stream->dvb->feeding == 0) {
 			CX18_DEBUG_INFO("Stopping Transport DMA\n");
 			mutex_lock(&cx->serialize_lock);
 			ret = cx18_stop_v4l2_encode_stream(stream, 0);
 			mutex_unlock(&cx->serialize_lock);
 		} else
 			ret = 0;
-		mutex_unlock(&stream->dvb.feedlock);
+		mutex_unlock(&stream->dvb->feedlock);
 	}
 
 	return ret;
@@ -307,7 +316,7 @@ static int cx18_dvb_stop_feed(struct dvb_demux_feed *feed)
 int cx18_dvb_register(struct cx18_stream *stream)
 {
 	struct cx18 *cx = stream->cx;
-	struct cx18_dvb *dvb = &stream->dvb;
+	struct cx18_dvb *dvb = stream->dvb;
 	struct dvb_adapter *dvb_adapter;
 	struct dvb_demux *dvbdemux;
 	struct dmx_demux *dmx;
@@ -316,6 +325,9 @@ int cx18_dvb_register(struct cx18_stream *stream)
 	if (!dvb)
 		return -EINVAL;
 
+	dvb->enabled = 0;
+	dvb->stream = stream;
+
 	ret = dvb_register_adapter(&dvb->dvb_adapter,
 			CX18_DRIVER_NAME,
 			THIS_MODULE, &cx->pci_dev->dev, adapter_nr);
@@ -369,7 +381,7 @@ int cx18_dvb_register(struct cx18_stream *stream)
 
 	CX18_INFO("DVB Frontend registered\n");
 	CX18_INFO("Registered DVB adapter%d for %s (%d x %d.%02d kB)\n",
-		  stream->dvb.dvb_adapter.num, stream->name,
+		  stream->dvb->dvb_adapter.num, stream->name,
 		  stream->buffers, stream->buf_size/1024,
 		  (stream->buf_size * 100 / 1024) % 100);
 
@@ -396,13 +408,16 @@ err_out:
 void cx18_dvb_unregister(struct cx18_stream *stream)
 {
 	struct cx18 *cx = stream->cx;
-	struct cx18_dvb *dvb = &stream->dvb;
+	struct cx18_dvb *dvb = stream->dvb;
 	struct dvb_adapter *dvb_adapter;
 	struct dvb_demux *dvbdemux;
 	struct dmx_demux *dmx;
 
 	CX18_INFO("unregister DVB\n");
 
+	if (dvb == NULL || !dvb->enabled)
+		return;
+
 	dvb_adapter = &dvb->dvb_adapter;
 	dvbdemux = &dvb->demux;
 	dmx = &dvbdemux->dmx;
@@ -423,7 +438,7 @@ void cx18_dvb_unregister(struct cx18_stream *stream)
  */
 static int dvb_register(struct cx18_stream *stream)
 {
-	struct cx18_dvb *dvb = &stream->dvb;
+	struct cx18_dvb *dvb = stream->dvb;
 	struct cx18 *cx = stream->cx;
 	int ret = 0;
 
@@ -495,6 +510,29 @@ static int dvb_register(struct cx18_stream *stream)
 				fe->ops.tuner_ops.set_config(fe, &ctrl);
 		}
 		break;
+	case CX18_CARD_GOTVIEW_PCI_DVD3:
+			dvb->fe = dvb_attach(zl10353_attach,
+					     &gotview_dvd3_zl10353_demod,
+					     &cx->i2c_adap[1]);
+		if (dvb->fe != NULL) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap = &cx->i2c_adap[1],
+				.i2c_addr = 0xc2 >> 1,
+				.ctrl = NULL,
+			};
+			static struct xc2028_ctrl ctrl = {
+				.fname   = XC2028_DEFAULT_FIRMWARE,
+				.max_len = 64,
+				.demod   = XC3028_FE_ZARLINK456,
+				.type    = XC2028_AUTO,
+			};
+
+			fe = dvb_attach(xc2028_attach, dvb->fe, &cfg);
+			if (fe != NULL && fe->ops.tuner_ops.set_config != NULL)
+				fe->ops.tuner_ops.set_config(fe, &ctrl);
+		}
+		break;
 	default:
 		/* No Digital Tv Support */
 		break;
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index a09caf88317..c330fb917b5 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -98,7 +98,7 @@ static int cx18_i2c_new_ir(struct cx18 *cx, struct i2c_adapter *adap, u32 hw,
 	case CX18_HW_Z8F0811_IR_RX_HAUP:
 		init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-		init_data->type = IR_TYPE_RC5;
+		init_data->type = RC_TYPE_RC5;
 		init_data->name = cx->card_name;
 		info.platform_data = init_data;
 		break;
@@ -122,15 +122,15 @@ int cx18_i2c_register(struct cx18 *cx, unsigned idx)
 	if (hw == CX18_HW_TUNER) {
 		/* special tuner group handling */
 		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
-				adap, NULL, type, 0, cx->card_i2c->radio);
+				adap, type, 0, cx->card_i2c->radio);
 		if (sd != NULL)
 			sd->grp_id = hw;
 		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
-				adap, NULL, type, 0, cx->card_i2c->demod);
+				adap, type, 0, cx->card_i2c->demod);
 		if (sd != NULL)
 			sd->grp_id = hw;
 		sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
-				adap, NULL, type, 0, cx->card_i2c->tv);
+				adap, type, 0, cx->card_i2c->tv);
 		if (sd != NULL)
 			sd->grp_id = hw;
 		return sd != NULL ? 0 : -1;
@@ -144,7 +144,7 @@ int cx18_i2c_register(struct cx18 *cx, unsigned idx)
 		return -1;
 
 	/* It's an I2C device other than an analog tuner or IR chip */
-	sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, NULL, type, hw_addrs[idx],
+	sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, type, hw_addrs[idx],
 				 NULL);
 	if (sd != NULL)
 		sd->grp_id = hw;
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 956aa190ecc..c545f3beef7 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -136,7 +136,7 @@ static void cx18_mdl_send_to_dvb(struct cx18_stream *s, struct cx18_mdl *mdl)
 {
 	struct cx18_buffer *buf;
 
-	if (!s->dvb.enabled || mdl->bytesused == 0)
+	if (s->dvb == NULL || !s->dvb->enabled || mdl->bytesused == 0)
 		return;
 
 	/* We ignore mdl and buf readpos accounting here - it doesn't matter */
@@ -146,7 +146,7 @@ static void cx18_mdl_send_to_dvb(struct cx18_stream *s, struct cx18_mdl *mdl)
 		buf = list_first_entry(&mdl->buf_list, struct cx18_buffer,
 				       list);
 		if (buf->bytesused)
-			dvb_dmx_swfilter(&s->dvb.demux,
+			dvb_dmx_swfilter(&s->dvb->demux,
 					 buf->buf, buf->bytesused);
 		return;
 	}
@@ -154,7 +154,7 @@ static void cx18_mdl_send_to_dvb(struct cx18_stream *s, struct cx18_mdl *mdl)
 	list_for_each_entry(buf, &mdl->buf_list, list) {
 		if (buf->bytesused == 0)
 			break;
-		dvb_dmx_swfilter(&s->dvb.demux, buf->buf, buf->bytesused);
+		dvb_dmx_swfilter(&s->dvb->demux, buf->buf, buf->bytesused);
 	}
 }
 
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 9045f1ece0e..94f5d7967c5 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -41,7 +41,7 @@ static struct v4l2_file_operations cx18_v4l2_enc_fops = {
 	.read = cx18_v4l2_read,
 	.open = cx18_v4l2_open,
 	/* FIXME change to video_ioctl2 if serialization lock can be removed */
-	.ioctl = cx18_v4l2_ioctl,
+	.unlocked_ioctl = cx18_v4l2_ioctl,
 	.release = cx18_v4l2_close,
 	.poll = cx18_v4l2_enc_poll,
 };
@@ -107,6 +107,7 @@ static void cx18_stream_init(struct cx18 *cx, int type)
 	s->video_dev = video_dev;
 
 	/* initialize cx18_stream fields */
+	s->dvb = NULL;
 	s->cx = cx;
 	s->type = type;
 	s->name = cx18_stream_info[type].name;
@@ -140,10 +141,15 @@ static int cx18_prep_dev(struct cx18 *cx, int type)
 	int num_offset = cx18_stream_info[type].num_offset;
 	int num = cx->instance + cx18_first_minor + num_offset;
 
-	/* These four fields are always initialized. If video_dev == NULL, then
-	   this stream is not in use. In that case no other fields but these
-	   four can be used. */
+	/*
+	 * These five fields are always initialized.
+	 * For analog capture related streams, if video_dev == NULL then the
+	 * stream is not in use.
+	 * For the TS stream, if dvb == NULL then the stream is not in use.
+	 * In those cases no other fields but these four can be used.
+	 */
 	s->video_dev = NULL;
+	s->dvb = NULL;
 	s->cx = cx;
 	s->type = type;
 	s->name = cx18_stream_info[type].name;
@@ -167,6 +173,21 @@ static int cx18_prep_dev(struct cx18 *cx, int type)
 
 	cx18_stream_init(cx, type);
 
+	/* Allocate the cx18_dvb struct only for the TS on cards with DTV */
+	if (type == CX18_ENC_STREAM_TYPE_TS) {
+		if (cx->card->hw_all & CX18_HW_DVB) {
+			s->dvb = kzalloc(sizeof(struct cx18_dvb), GFP_KERNEL);
+			if (s->dvb == NULL) {
+				CX18_ERR("Couldn't allocate cx18_dvb structure"
+					 " for %s\n", s->name);
+				return -ENOMEM;
+			}
+		} else {
+			/* Don't need buffers for the TS, if there is no DVB */
+			s->buffers = 0;
+		}
+	}
+
 	if (num_offset == -1)
 		return 0;
 
@@ -222,13 +243,7 @@ static int cx18_reg_dev(struct cx18 *cx, int type)
 	const char *name;
 	int num, ret;
 
-	/* TODO: Shouldn't this be a VFL_TYPE_TRANSPORT or something?
-	 * We need a VFL_TYPE_TS defined.
-	 */
-	if (strcmp("TS", s->name) == 0) {
-		/* just return if no DVB is supported */
-		if ((cx->card->hw_all & CX18_HW_DVB) == 0)
-			return 0;
+	if (type == CX18_ENC_STREAM_TYPE_TS && s->dvb != NULL) {
 		ret = cx18_dvb_register(s);
 		if (ret < 0) {
 			CX18_ERR("DVB failed to register\n");
@@ -320,11 +335,13 @@ void cx18_streams_cleanup(struct cx18 *cx, int unregister)
 	/* Teardown all streams */
 	for (type = 0; type < CX18_MAX_STREAMS; type++) {
 
-		/* No struct video_device, but can have buffers allocated */
+		/* The TS has a cx18_dvb structure, not a video_device */
 		if (type == CX18_ENC_STREAM_TYPE_TS) {
-			if (cx->streams[type].dvb.enabled) {
-				cx18_dvb_unregister(&cx->streams[type]);
-				cx->streams[type].dvb.enabled = false;
+			if (cx->streams[type].dvb != NULL) {
+				if (unregister)
+					cx18_dvb_unregister(&cx->streams[type]);
+				kfree(cx->streams[type].dvb);
+				cx->streams[type].dvb = NULL;
 				cx18_stream_free(&cx->streams[type]);
 			}
 			continue;
diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h
index 77412bee596..51765eb12d3 100644
--- a/drivers/media/video/cx18/cx18-streams.h
+++ b/drivers/media/video/cx18/cx18-streams.h
@@ -33,7 +33,8 @@ void cx18_stream_rotate_idx_mdls(struct cx18 *cx);
 
 static inline bool cx18_stream_enabled(struct cx18_stream *s)
 {
-	return s->video_dev || s->dvb.enabled ||
+	return s->video_dev ||
+	       (s->dvb && s->dvb->enabled) ||
 	       (s->type == CX18_ENC_STREAM_TYPE_IDX &&
 		s->cx->stream_buffers[CX18_ENC_STREAM_TYPE_IDX] != 0);
 }
diff --git a/drivers/media/video/cx231xx/Kconfig b/drivers/media/video/cx231xx/Kconfig
index bb04914983f..ae85a7a7bd7 100644
--- a/drivers/media/video/cx231xx/Kconfig
+++ b/drivers/media/video/cx231xx/Kconfig
@@ -1,9 +1,9 @@
 config VIDEO_CX231XX
 	tristate "Conexant cx231xx USB video capture support"
-	depends on VIDEO_DEV && I2C && INPUT
+	depends on VIDEO_DEV && I2C
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on VIDEO_IR
+	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select VIDEO_CX25840
 	select VIDEO_CX2341X
@@ -14,6 +14,19 @@ config VIDEO_CX231XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called cx231xx
 
+config VIDEO_CX231XX_RC
+	bool "Conexant cx231xx Remote Controller additional support"
+	depends on RC_CORE
+	depends on VIDEO_CX231XX
+	default y
+	---help---
+	  cx231xx hardware has a builtin RX/TX support. However, a few
+	  designs opted to not use it, but, instead, some other hardware.
+	  This module enables the usage of those other hardware, like the
+	  ones used with ISDB-T boards.
+
+	  On most cases, all you need for IR is mceusb module.
+
 config VIDEO_CX231XX_ALSA
 	tristate "Conexant Cx231xx ALSA audio module"
 	depends on VIDEO_CX231XX && SND
@@ -30,6 +43,8 @@ config VIDEO_CX231XX_DVB
 	depends on VIDEO_CX231XX && DVB_CORE
 	select VIDEOBUF_DVB
 	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_NXP18271 if !DVB_FE_CUSTOMISE
+	select DVB_MB86A20S if !DVB_FE_CUSTOMISE
 
 	---help---
 	  This adds support for DVB cards based on the
diff --git a/drivers/media/video/cx231xx/Makefile b/drivers/media/video/cx231xx/Makefile
index a6bc4cc5467..2c248435544 100644
--- a/drivers/media/video/cx231xx/Makefile
+++ b/drivers/media/video/cx231xx/Makefile
@@ -1,5 +1,6 @@
-cx231xx-objs     := cx231xx-video.o cx231xx-i2c.o cx231xx-cards.o cx231xx-core.o \
-		    cx231xx-avcore.o cx231xx-417.o cx231xx-pcb-cfg.o cx231xx-vbi.o
+cx231xx-y += cx231xx-video.o cx231xx-i2c.o cx231xx-cards.o cx231xx-core.o
+cx231xx-y += cx231xx-avcore.o cx231xx-417.o cx231xx-pcb-cfg.o cx231xx-vbi.o
+cx231xx-$(CONFIG_VIDEO_CX231XX_RC) += cx231xx-input.o
 
 cx231xx-alsa-objs := cx231xx-audio.o
 
diff --git a/drivers/media/video/cx231xx/cx231xx-417.c b/drivers/media/video/cx231xx/cx231xx-417.c
index aab21f3ce47..fc9526a5b74 100644
--- a/drivers/media/video/cx231xx/cx231xx-417.c
+++ b/drivers/media/video/cx231xx/cx231xx-417.c
@@ -31,7 +31,6 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
-#include <linux/smp_lock.h>
 #include <linux/vmalloc.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
@@ -941,14 +940,14 @@ static int cx231xx_load_firmware(struct cx231xx *dev)
 	u16 _buffer_size = 4096;
 	u8 *p_buffer;
 
-	p_current_fw = (u32 *)vmalloc(1884180*4);
+	p_current_fw = vmalloc(1884180 * 4);
 	p_fw = p_current_fw;
 	if (p_current_fw == 0) {
 		dprintk(2, "FAIL!!!\n");
 		return -1;
 	}
 
-	p_buffer = (u8 *)vmalloc(4096);
+	p_buffer = vmalloc(4096);
 	if (p_buffer == 0) {
 		dprintk(2, "FAIL!!!\n");
 		return -1;
@@ -1927,10 +1926,9 @@ static int mpeg_open(struct file *file)
 			dev = h;
 	}
 
-	if (dev == NULL) {
-		unlock_kernel();
+	if (dev == NULL)
 		return -ENODEV;
-	}
+
 	mutex_lock(&dev->lock);
 
 	/* allocate + initialize per filehandle data */
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index cf50fafa8ab..c53e97295a0 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -274,7 +274,7 @@ int cx231xx_afe_set_input_mux(struct cx231xx *dev, u32 input_mux)
 
 	if (ch1_setting != 0) {
 		status = afe_read_byte(dev, ADC_INPUT_CH1, &value);
-		value &= (!INPUT_SEL_MASK);
+		value &= ~INPUT_SEL_MASK;
 		value |= (ch1_setting - 1) << 4;
 		value &= 0xff;
 		status = afe_write_byte(dev, ADC_INPUT_CH1, value);
@@ -282,7 +282,7 @@ int cx231xx_afe_set_input_mux(struct cx231xx *dev, u32 input_mux)
 
 	if (ch2_setting != 0) {
 		status = afe_read_byte(dev, ADC_INPUT_CH2, &value);
-		value &= (!INPUT_SEL_MASK);
+		value &= ~INPUT_SEL_MASK;
 		value |= (ch2_setting - 1) << 4;
 		value &= 0xff;
 		status = afe_write_byte(dev, ADC_INPUT_CH2, value);
@@ -292,7 +292,7 @@ int cx231xx_afe_set_input_mux(struct cx231xx *dev, u32 input_mux)
 	   7 less than the input number */
 	if (ch3_setting != 0) {
 		status = afe_read_byte(dev, ADC_INPUT_CH3, &value);
-		value &= (!INPUT_SEL_MASK);
+		value &= ~INPUT_SEL_MASK;
 		value |= (ch3_setting - 1) << 4;
 		value &= 0xff;
 		status = afe_write_byte(dev, ADC_INPUT_CH3, value);
@@ -354,6 +354,7 @@ int cx231xx_afe_update_power_control(struct cx231xx *dev,
 	case CX231XX_BOARD_CNXT_VIDEO_GRABBER:
 	case CX231XX_BOARD_HAUPPAUGE_EXETER:
 	case CX231XX_BOARD_HAUPPAUGE_USBLIVE2:
+	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 		if (avmode == POLARIS_AVMODE_ANALOGT_TV) {
 			while (afe_power_status != (FLD_PWRDN_TUNING_BIAS |
 						FLD_PWRDN_ENABLE_PLL)) {
diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c
index 56c2d8195ac..588f3e8f028 100644
--- a/drivers/media/video/cx231xx/cx231xx-cards.c
+++ b/drivers/media/video/cx231xx/cx231xx-cards.c
@@ -34,6 +34,7 @@
 #include <media/cx25840.h>
 #include "dvb-usb-ids.h"
 #include "xc5000.h"
+#include "tda18271.h"
 
 #include "cx231xx.h"
 
@@ -395,6 +396,45 @@ struct cx231xx_board cx231xx_boards[] = {
 			.gpio = 0,
 		} },
 	},
+	[CX231XX_BOARD_PV_PLAYTV_USB_HYBRID] = {
+		.name = "Pixelview PlayTV USB Hybrid",
+		.tuner_type = TUNER_NXP_TDA18271,
+		.tuner_addr = 0x60,
+		.decoder = CX231XX_AVDECODER,
+		.output_mode = OUT_MODE_VIP11,
+		.demod_xfer_mode = 0,
+		.ctl_pin_status_mask = 0xFFFFFFC4,
+		.agc_analog_digital_select_gpio = 0x00,	/* According with PV cxPolaris.inf file */
+		.tuner_sif_gpio = -1,
+		.tuner_scl_gpio = -1,
+		.tuner_sda_gpio = -1,
+		.gpio_pin_status_mask = 0x4001000,
+		.tuner_i2c_master = 2,
+		.demod_i2c_master = 1,
+		.ir_i2c_master = 2,
+		.rc_map_name = RC_MAP_PIXELVIEW_002T,
+		.has_dvb = 1,
+		.demod_addr = 0x10,
+		.norm = V4L2_STD_PAL_M,
+		.input = {{
+			.type = CX231XX_VMUX_TELEVISION,
+			.vmux = CX231XX_VIN_3_1,
+			.amux = CX231XX_AMUX_VIDEO,
+			.gpio = 0,
+		}, {
+			.type = CX231XX_VMUX_COMPOSITE1,
+			.vmux = CX231XX_VIN_2_1,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = 0,
+		}, {
+			.type = CX231XX_VMUX_SVIDEO,
+			.vmux = CX231XX_VIN_1_1 |
+				(CX231XX_VIN_1_2 << 8) |
+				CX25840_SVIDEO_ON,
+			.amux = CX231XX_AMUX_LINE_IN,
+			.gpio = 0,
+		} },
+	},
 };
 const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
 
@@ -402,8 +442,6 @@ const unsigned int cx231xx_bcount = ARRAY_SIZE(cx231xx_boards);
 struct usb_device_id cx231xx_id_table[] = {
 	{USB_DEVICE(0x0572, 0x5A3C),
 	 .driver_info = CX231XX_BOARD_UNKNOWN},
-	{USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000,0x4fff),
-	 .driver_info = CX231XX_BOARD_UNKNOWN},
 	{USB_DEVICE(0x0572, 0x58A2),
 	 .driver_info = CX231XX_BOARD_CNXT_CARRAERA},
 	{USB_DEVICE(0x0572, 0x58A1),
@@ -424,6 +462,8 @@ struct usb_device_id cx231xx_id_table[] = {
 	 .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER},
 	{USB_DEVICE(0x2040, 0xc200),
 	 .driver_info = CX231XX_BOARD_HAUPPAUGE_USBLIVE2},
+	{USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000, 0x4001),
+	 .driver_info = CX231XX_BOARD_PV_PLAYTV_USB_HYBRID},
 	{},
 };
 
@@ -453,6 +493,16 @@ int cx231xx_tuner_callback(void *ptr, int component, int command, int arg)
 					       1);
 			msleep(10);
 		}
+	} else if (dev->tuner_type == TUNER_NXP_TDA18271) {
+		switch (command) {
+		case TDA18271_CALLBACK_CMD_AGC_ENABLE:
+			if (dev->model == CX231XX_BOARD_PV_PLAYTV_USB_HYBRID)
+				rc = cx231xx_set_agc_analog_digital_mux_select(dev, arg);
+			break;
+		default:
+			rc = -EINVAL;
+			break;
+		}
 	}
 	return rc;
 }
@@ -560,7 +610,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
 	if (dev->board.decoder == CX231XX_AVDECODER) {
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 					&dev->i2c_bus[0].i2c_adap,
-					NULL, "cx25840", 0x88 >> 1, NULL);
+					"cx25840", 0x88 >> 1, NULL);
 		if (dev->sd_cx25840 == NULL)
 			cx231xx_info("cx25840 subdev registration failure\n");
 		cx25840_call(dev, core, load_fw);
@@ -571,7 +621,7 @@ void cx231xx_card_setup(struct cx231xx *dev)
 	if (dev->board.tuner_type != TUNER_ABSENT) {
 		dev->sd_tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 						    &dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
-						    NULL, "tuner",
+						    "tuner",
 						    dev->tuner_addr, NULL);
 		if (dev->sd_tuner == NULL)
 			cx231xx_info("tuner subdev registration failure\n");
@@ -615,8 +665,11 @@ void cx231xx_release_resources(struct cx231xx *dev)
 
 	cx231xx_remove_from_devlist(dev);
 
+	/* Release I2C buses */
 	cx231xx_dev_uninit(dev);
 
+	cx231xx_ir_exit(dev);
+
 	usb_put_dev(dev->udev);
 
 	/* Mark device as unused */
@@ -731,16 +784,14 @@ static int cx231xx_init_dev(struct cx231xx **devhandle, struct usb_device *udev,
 	retval = cx231xx_register_analog_devices(dev);
 	if (retval < 0) {
 		cx231xx_release_resources(dev);
-		goto fail_reg_devices;
+		return retval;
 	}
 
+	cx231xx_ir_init(dev);
+
 	cx231xx_init_extension(dev);
 
 	return 0;
-
-fail_reg_devices:
-	mutex_unlock(&dev->lock);
-	return retval;
 }
 
 #if defined(CONFIG_MODULES) && defined(MODULE)
@@ -762,8 +813,14 @@ static void request_modules(struct cx231xx *dev)
 	INIT_WORK(&dev->request_module_wk, request_module_async);
 	schedule_work(&dev->request_module_wk);
 }
+
+static void flush_request_modules(struct cx231xx *dev)
+{
+	flush_work_sync(&dev->request_module_wk);
+}
 #else
 #define request_modules(dev)
+#define flush_request_modules(dev)
 #endif /* CONFIG_MODULES */
 
 /*
@@ -1096,6 +1153,8 @@ static void cx231xx_usb_disconnect(struct usb_interface *interface)
 	if (!dev->udev)
 		return;
 
+	flush_request_modules(dev);
+
 	/* delete v4l2 device */
 	v4l2_device_unregister(&dev->v4l2_dev);
 
diff --git a/drivers/media/video/cx231xx/cx231xx-core.c b/drivers/media/video/cx231xx/cx231xx-core.c
index 4af46fca9b0..7d62d58617f 100644
--- a/drivers/media/video/cx231xx/cx231xx-core.c
+++ b/drivers/media/video/cx231xx/cx231xx-core.c
@@ -740,6 +740,7 @@ int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode)
 		case CX231XX_BOARD_CNXT_RDE_253S:
 		case CX231XX_BOARD_CNXT_RDU_253S:
 		case CX231XX_BOARD_HAUPPAUGE_EXETER:
+		case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 		errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 			break;
 		default:
@@ -1288,7 +1289,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
 	/* Internal Master 3 Bus */
 	dev->i2c_bus[2].nr = 2;
 	dev->i2c_bus[2].dev = dev;
-	dev->i2c_bus[2].i2c_period = I2C_SPEED_400K;	/* 400kHz */
+	dev->i2c_bus[2].i2c_period = I2C_SPEED_100K;	/* 100kHz */
 	dev->i2c_bus[2].i2c_nostop = 0;
 	dev->i2c_bus[2].i2c_reserve = 0;
 
@@ -1381,6 +1382,7 @@ int cx231xx_dev_init(struct cx231xx *dev)
 	case CX231XX_BOARD_CNXT_RDE_253S:
 	case CX231XX_BOARD_CNXT_RDU_253S:
 	case CX231XX_BOARD_HAUPPAUGE_EXETER:
+	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
 	errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0);
 		break;
 	default:
@@ -1513,7 +1515,7 @@ int cx231xx_read_i2c_master(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 
 	if (saddr_len == 0)
 		saddr = 0;
-	else if (saddr_len == 0)
+	else if (saddr_len == 1)
 		saddr &= 0xff;
 
 	/* prepare xfer_data struct */
@@ -1564,7 +1566,7 @@ int cx231xx_write_i2c_master(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 
 	if (saddr_len == 0)
 		saddr = 0;
-	else if (saddr_len == 0)
+	else if (saddr_len == 1)
 		saddr &= 0xff;
 
 	/* prepare xfer_data struct */
@@ -1598,7 +1600,7 @@ int cx231xx_read_i2c_data(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 
 	if (saddr_len == 0)
 		saddr = 0;
-	else if (saddr_len == 0)
+	else if (saddr_len == 1)
 		saddr &= 0xff;
 
 	/* prepare xfer_data struct */
@@ -1639,7 +1641,7 @@ int cx231xx_write_i2c_data(struct cx231xx *dev, u8 dev_addr, u16 saddr,
 
 	if (saddr_len == 0)
 		saddr = 0;
-	else if (saddr_len == 0)
+	else if (saddr_len == 1)
 		saddr &= 0xff;
 
 	/* prepare xfer_data struct */
diff --git a/drivers/media/video/cx231xx/cx231xx-dvb.c b/drivers/media/video/cx231xx/cx231xx-dvb.c
index 5feb3ee640d..fe59a1c3f06 100644
--- a/drivers/media/video/cx231xx/cx231xx-dvb.c
+++ b/drivers/media/video/cx231xx/cx231xx-dvb.c
@@ -33,6 +33,7 @@
 #include "tda18271.h"
 #include "s5h1411.h"
 #include "lgdt3305.h"
+#include "mb86a20s.h"
 
 MODULE_DESCRIPTION("driver for cx231xx based DVB cards");
 MODULE_AUTHOR("Srinivasa Deevi <srinivasa.deevi@conexant.com>");
@@ -88,6 +89,11 @@ static struct tda18271_std_map cnxt_rde253s_tda18271_std_map = {
 		      .if_lvl = 1, .rfagc_top = 0x37, },
 };
 
+static struct tda18271_std_map mb86a20s_tda18271_config = {
+	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+		      .if_lvl = 7, .rfagc_top = 0x37, },
+};
+
 static struct tda18271_config cnxt_rde253s_tunerconfig = {
 	.std_map = &cnxt_rde253s_tda18271_std_map,
 	.gate    = TDA18271_GATE_ANALOG,
@@ -135,6 +141,17 @@ static struct tda18271_config hcw_tda18271_config = {
 	.gate    = TDA18271_GATE_DIGITAL,
 };
 
+static const struct mb86a20s_config pv_mb86a20s_config = {
+	.demod_address = 0x10,
+	.is_serial = true,
+};
+
+static struct tda18271_config pv_tda18271_config = {
+	.std_map = &mb86a20s_tda18271_config,
+	.gate    = TDA18271_GATE_DIGITAL,
+	.small_i2c = TDA18271_03_BYTE_CHUNK_INIT,
+};
+
 static inline void print_err_status(struct cx231xx *dev, int packet, int status)
 {
 	char *errmsg = "Unknown";
@@ -687,6 +704,29 @@ static int dvb_init(struct cx231xx *dev)
 			   &hcw_tda18271_config);
 		break;
 
+	case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID:
+
+		printk(KERN_INFO "%s: looking for demod on i2c bus: %d\n",
+		       __func__, i2c_adapter_id(&dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap));
+
+		dev->dvb->frontend = dvb_attach(mb86a20s_attach,
+						&pv_mb86a20s_config,
+						&dev->i2c_bus[dev->board.demod_i2c_master].i2c_adap);
+
+		if (dev->dvb->frontend == NULL) {
+			printk(DRIVER_NAME
+			       ": Failed to attach mb86a20s demod\n");
+			result = -EINVAL;
+			goto out_free;
+		}
+
+		/* define general-purpose callback pointer */
+		dvb->frontend->callback = cx231xx_tuner_callback;
+
+		dvb_attach(tda18271_attach, dev->dvb->frontend,
+			   0x60, &dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
+			   &pv_tda18271_config);
+		break;
 
 	default:
 		printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card"
diff --git a/drivers/media/video/cx231xx/cx231xx-input.c b/drivers/media/video/cx231xx/cx231xx-input.c
new file mode 100644
index 00000000000..45e14cac462
--- /dev/null
+++ b/drivers/media/video/cx231xx/cx231xx-input.c
@@ -0,0 +1,112 @@
+/*
+ *   cx231xx IR glue driver
+ *
+ *   Copyright (C) 2010 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ *   Polaris (cx231xx) has its support for IR's with a design close to MCE.
+ *   however, a few designs are using an external I2C chip for IR, instead
+ *   of using the one provided by the chip.
+ *   This driver provides support for those extra devices
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License as
+ *   published by the Free Software Foundation version 2.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *   General Public License for more details.
+ */
+
+#include "cx231xx.h"
+#include <linux/usb.h>
+#include <linux/slab.h>
+
+#define MODULE_NAME "cx231xx-input"
+
+static int get_key_isdbt(struct IR_i2c *ir, u32 *ir_key,
+			 u32 *ir_raw)
+{
+	u8	cmd, scancode;
+
+	dev_dbg(&ir->rc->input_dev->dev, "%s\n", __func__);
+
+		/* poll IR chip */
+	if (1 != i2c_master_recv(ir->c, &cmd, 1))
+		return -EIO;
+
+	/* it seems that 0xFE indicates that a button is still hold
+	   down, while 0xff indicates that no button is hold
+	   down. 0xfe sequences are sometimes interrupted by 0xFF */
+
+	if (cmd == 0xff)
+		return 0;
+
+	scancode =
+		 ((cmd & 0x01) ? 0x80 : 0) |
+		 ((cmd & 0x02) ? 0x40 : 0) |
+		 ((cmd & 0x04) ? 0x20 : 0) |
+		 ((cmd & 0x08) ? 0x10 : 0) |
+		 ((cmd & 0x10) ? 0x08 : 0) |
+		 ((cmd & 0x20) ? 0x04 : 0) |
+		 ((cmd & 0x40) ? 0x02 : 0) |
+		 ((cmd & 0x80) ? 0x01 : 0);
+
+	dev_dbg(&ir->rc->input_dev->dev, "cmd %02x, scan = %02x\n",
+		cmd, scancode);
+
+	*ir_key = scancode;
+	*ir_raw = scancode;
+	return 1;
+}
+
+int cx231xx_ir_init(struct cx231xx *dev)
+{
+	struct i2c_board_info info;
+	u8 ir_i2c_bus;
+
+	dev_dbg(&dev->udev->dev, "%s\n", __func__);
+
+	/* Only initialize if a rc keycode map is defined */
+	if (!cx231xx_boards[dev->model].rc_map_name)
+		return -ENODEV;
+
+	request_module("ir-kbd-i2c");
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	memset(&dev->init_data, 0, sizeof(dev->init_data));
+	dev->init_data.rc_dev = rc_allocate_device();
+	if (!dev->init_data.rc_dev)
+		return -ENOMEM;
+
+	dev->init_data.name = cx231xx_boards[dev->model].name;
+
+	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
+	info.platform_data = &dev->init_data;
+
+	/*
+	 * Board-dependent values
+	 *
+	 * For now, there's just one type of hardware design using
+	 * an i2c device.
+	 */
+	dev->init_data.get_key = get_key_isdbt;
+	dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map_name;
+	/* The i2c micro-controller only outputs the cmd part of NEC protocol */
+	dev->init_data.rc_dev->scanmask = 0xff;
+	dev->init_data.rc_dev->driver_name = "cx231xx";
+	dev->init_data.type = RC_TYPE_NEC;
+	info.addr = 0x30;
+
+	/* Load and bind ir-kbd-i2c */
+	ir_i2c_bus = cx231xx_boards[dev->model].ir_i2c_master;
+	dev_dbg(&dev->udev->dev, "Trying to bind ir at bus %d, addr 0x%02x\n",
+		ir_i2c_bus, info.addr);
+	i2c_new_device(&dev->i2c_bus[ir_i2c_bus].i2c_adap, &info);
+
+	return 0;
+}
+
+void cx231xx_ir_exit(struct cx231xx *dev)
+{
+}
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index b13b69fb2af..7e3e8c4f19b 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -2044,15 +2044,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 	return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct cx231xx_fh *fh = priv;
-
-	return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
-}
-#endif
-
 /* ----------------------------------------------------------- */
 /* RADIO ESPECIFIC IOCTLS                                      */
 /* ----------------------------------------------------------- */
@@ -2507,9 +2498,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_g_register             = vidioc_g_register,
 	.vidioc_s_register             = vidioc_s_register,
 #endif
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf                   = vidiocgmbuf,
-#endif
 };
 
 static struct video_device cx231xx_vbi_template;
diff --git a/drivers/media/video/cx231xx/cx231xx.h b/drivers/media/video/cx231xx/cx231xx.h
index d067df9b81e..72bbea2bcd5 100644
--- a/drivers/media/video/cx231xx/cx231xx.h
+++ b/drivers/media/video/cx231xx/cx231xx.h
@@ -34,7 +34,8 @@
 
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-device.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
+#include <media/ir-kbd-i2c.h>
 #include <media/videobuf-dvb.h>
 
 #include "cx231xx-reg.h"
@@ -62,6 +63,7 @@
 #define CX231XX_BOARD_CNXT_RDU_250	7
 #define CX231XX_BOARD_HAUPPAUGE_EXETER  8
 #define CX231XX_BOARD_HAUPPAUGE_USBLIVE2 9
+#define CX231XX_BOARD_PV_PLAYTV_USB_HYBRID 10
 
 /* Limits minimum and default number of buffers */
 #define CX231XX_MIN_BUF                 4
@@ -344,6 +346,10 @@ struct cx231xx_board {
 	/* i2c masters */
 	u8 tuner_i2c_master;
 	u8 demod_i2c_master;
+	u8 ir_i2c_master;
+
+	/* for devices with I2C chips for IR */
+	char *rc_map_name;
 
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
@@ -356,7 +362,7 @@ struct cx231xx_board {
 
 	struct cx231xx_input input[MAX_CX231XX_INPUT];
 	struct cx231xx_input radio;
-	struct ir_scancode_table *ir_codes;
+	struct rc_map *ir_codes;
 };
 
 /* device states */
@@ -605,6 +611,9 @@ struct cx231xx {
 
 	struct cx231xx_board board;
 
+	/* For I2C IR support */
+	struct IR_i2c_init_data    init_data;
+
 	unsigned int stream_on:1;	/* Locks streams */
 	unsigned int vbi_stream_on:1;	/* Locks streams for VBI */
 	unsigned int has_audio_class:1;
@@ -616,8 +625,6 @@ struct cx231xx {
 	struct v4l2_subdev *sd_cx25840;
 	struct v4l2_subdev *sd_tuner;
 
-	struct cx231xx_IR *ir;
-
 	struct work_struct wq_trigger;		/* Trigger to start/stop audio for alsa module */
 	atomic_t	   stream_started;	/* stream should be running if true */
 
@@ -954,6 +961,17 @@ int cx231xx_tuner_callback(void *ptr, int component, int command, int arg);
 extern int cx231xx_417_register(struct cx231xx *dev);
 extern void cx231xx_417_unregister(struct cx231xx *dev);
 
+/* cx23885-input.c                                             */
+
+#if defined(CONFIG_VIDEO_CX231XX_RC)
+int cx231xx_ir_init(struct cx231xx *dev);
+void cx231xx_ir_exit(struct cx231xx *dev);
+#else
+#define cx231xx_ir_init(dev)	(0)
+#define cx231xx_ir_exit(dev)	(0)
+#endif
+
+
 /* printk macros */
 
 #define cx231xx_err(fmt, arg...) do {\
diff --git a/drivers/media/video/cx2341x.c b/drivers/media/video/cx2341x.c
index e5c3c8da4be..103ef6bad2e 100644
--- a/drivers/media/video/cx2341x.c
+++ b/drivers/media/video/cx2341x.c
@@ -853,9 +853,9 @@ int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
 }
 EXPORT_SYMBOL(cx2341x_ctrl_query);
 
-const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id)
+const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id)
 {
-	static const char *mpeg_stream_type_without_ts[] = {
+	static const char * const mpeg_stream_type_without_ts[] = {
 		"MPEG-2 Program Stream",
 		"",
 		"MPEG-1 System Stream",
@@ -952,7 +952,7 @@ int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
 	for (i = 0; i < ctrls->count; i++) {
 		struct v4l2_ext_control *ctrl = ctrls->controls + i;
 		struct v4l2_queryctrl qctrl;
-		const char **menu_items = NULL;
+		const char * const *menu_items = NULL;
 
 		qctrl.id = ctrl->id;
 		err = cx2341x_ctrl_query(params, &qctrl);
@@ -1135,7 +1135,7 @@ EXPORT_SYMBOL(cx2341x_update);
 
 static const char *cx2341x_menu_item(const struct cx2341x_mpeg_params *p, u32 id)
 {
-	const char **menu = cx2341x_ctrl_get_menu(p, id);
+	const char * const *menu = cx2341x_ctrl_get_menu(p, id);
 	struct v4l2_ext_control ctrl;
 
 	if (menu == NULL)
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index e1367b35647..6b4a516addf 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -5,7 +5,7 @@ config VIDEO_CX23885
 	select VIDEO_BTCX
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on IR_CORE
+	depends on RC_CORE
 	select VIDEOBUF_DVB
 	select VIDEOBUF_DMA_SG
 	select VIDEO_CX25840
diff --git a/drivers/media/video/cx23885/cimax2.c b/drivers/media/video/cx23885/cimax2.c
index c95e7bc1474..209b971bd26 100644
--- a/drivers/media/video/cx23885/cimax2.c
+++ b/drivers/media/video/cx23885/cimax2.c
@@ -368,7 +368,7 @@ static void netup_read_ci_status(struct work_struct *work)
 				DVB_CA_EN50221_POLL_CAM_READY;
 		else
 			state->status = 0;
-	};
+	}
 }
 
 /* CI irq handler */
@@ -377,16 +377,24 @@ int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status)
 	struct cx23885_tsport *port = NULL;
 	struct netup_ci_state *state = NULL;
 
-	if (pci_status & PCI_MSK_GPIO0)
-		port = &dev->ts1;
-	else if (pci_status & PCI_MSK_GPIO1)
-		port = &dev->ts2;
-	else /* who calls ? */
+	ci_dbg_print("%s:\n", __func__);
+
+	if (0 == (pci_status & (PCI_MSK_GPIO0 | PCI_MSK_GPIO1)))
 		return 0;
 
-	state = port->port_priv;
+	if (pci_status & PCI_MSK_GPIO0) {
+		port = &dev->ts1;
+		state = port->port_priv;
+		schedule_work(&state->work);
+		ci_dbg_print("%s: Wakeup CI0\n", __func__);
+	}
 
-	schedule_work(&state->work);
+	if (pci_status & PCI_MSK_GPIO1) {
+		port = &dev->ts2;
+		state = port->port_priv;
+		schedule_work(&state->work);
+		ci_dbg_print("%s: Wakeup CI1\n", __func__);
+	}
 
 	return 1;
 }
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index a6cc12f8736..9a98dc55f65 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -31,7 +31,6 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
@@ -1576,12 +1575,8 @@ static int mpeg_open(struct file *file)
 
 	/* allocate + initialize per filehandle data */
 	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
-	if (NULL == fh) {
-		unlock_kernel();
+	if (!fh)
 		return -ENOMEM;
-	}
-
-	lock_kernel();
 
 	file->private_data = fh;
 	fh->dev      = dev;
@@ -1592,8 +1587,6 @@ static int mpeg_open(struct file *file)
 			    V4L2_FIELD_INTERLACED,
 			    sizeof(struct cx23885_buffer),
 			    fh, NULL);
-	unlock_kernel();
-
 	return 0;
 }
 
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index db054004e46..b298b730943 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -309,6 +309,26 @@ struct cx23885_board cx23885_boards[] = {
 				  CX25840_COMPONENT_ON,
 		} },
 	},
+	[CX23885_BOARD_GOTVIEW_X5_3D_HYBRID] = {
+		.name		= "GoTView X5 3D Hybrid",
+		.tuner_type	= TUNER_XC5000,
+		.tuner_addr	= 0x64,
+		.porta		= CX23885_ANALOG_VIDEO,
+		.portb		= CX23885_MPEG_DVB,
+		.input          = {{
+			.type   = CX23885_VMUX_TELEVISION,
+			.vmux   = CX25840_VIN2_CH1 |
+				  CX25840_VIN5_CH2,
+			.gpio0	= 0x02,
+		}, {
+			.type   = CX23885_VMUX_COMPOSITE1,
+			.vmux   = CX23885_VMUX_COMPOSITE1,
+		}, {
+			.type   = CX23885_VMUX_SVIDEO,
+			.vmux   = CX25840_SVIDEO_LUMA3 |
+				  CX25840_SVIDEO_CHROMA4,
+		} },
+	},
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -496,6 +516,10 @@ struct cx23885_subid cx23885_subids[] = {
 		.subvendor = 0x107d,
 		.subdevice = 0x6f22,
 		.card      = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200,
+	}, {
+		.subvendor = 0x5654,
+		.subdevice = 0x2390,
+		.card      = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID,
 	},
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -712,6 +736,10 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
 		else if (port->nr == 2)
 			bitmask = 0x04;
 		break;
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+		/* Tuner Reset Command */
+		bitmask = 0x02;
+		break;
 	}
 
 	if (bitmask) {
@@ -967,6 +995,9 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
 		/* CX24228 GPIO */
 		/* Connected to IF / Mux */
 		break;
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
+		cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
+		break;
 	}
 }
 
@@ -1218,6 +1249,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
 	default:
 		ts2->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
@@ -1245,9 +1277,10 @@ void cx23885_card_setup(struct cx23885_dev *dev)
 	case CX23885_BOARD_MAGICPRO_PROHDTVE2:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
+	case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
 		dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[2].i2c_adap,
-				NULL, "cx25840", 0x88 >> 1, NULL);
+				"cx25840", 0x88 >> 1, NULL);
 		if (dev->sd_cx25840) {
 			dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
 			v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
diff --git a/drivers/media/video/cx23885/cx23885-input.c b/drivers/media/video/cx23885/cx23885-input.c
index bb61870b8d6..199b9964bbe 100644
--- a/drivers/media/video/cx23885/cx23885-input.c
+++ b/drivers/media/video/cx23885/cx23885-input.c
@@ -35,9 +35,8 @@
  *  02110-1301, USA.
  */
 
-#include <linux/input.h>
 #include <linux/slab.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/v4l2-subdev.h>
 
 #include "cx23885.h"
@@ -62,16 +61,16 @@ static void cx23885_input_process_measurements(struct cx23885_dev *dev,
 		count = num / sizeof(struct ir_raw_event);
 
 		for (i = 0; i < count; i++) {
-			ir_raw_event_store(kernel_ir->inp_dev,
+			ir_raw_event_store(kernel_ir->rc,
 					   &ir_core_event[i]);
 			handle = true;
 		}
 	} while (num != 0);
 
 	if (overrun)
-		ir_raw_event_reset(kernel_ir->inp_dev);
+		ir_raw_event_reset(kernel_ir->rc);
 	else if (handle)
-		ir_raw_event_handle(kernel_ir->inp_dev);
+		ir_raw_event_handle(kernel_ir->rc);
 }
 
 void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
@@ -197,9 +196,9 @@ static int cx23885_input_ir_start(struct cx23885_dev *dev)
 	return 0;
 }
 
-static int cx23885_input_ir_open(void *priv)
+static int cx23885_input_ir_open(struct rc_dev *rc)
 {
-	struct cx23885_kernel_ir *kernel_ir = priv;
+	struct cx23885_kernel_ir *kernel_ir = rc->priv;
 
 	if (kernel_ir->cx == NULL)
 		return -ENODEV;
@@ -230,13 +229,11 @@ static void cx23885_input_ir_stop(struct cx23885_dev *dev)
 		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
 		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
 	}
-
-	flush_scheduled_work();
 }
 
-static void cx23885_input_ir_close(void *priv)
+static void cx23885_input_ir_close(struct rc_dev *rc)
 {
-	struct cx23885_kernel_ir *kernel_ir = priv;
+	struct cx23885_kernel_ir *kernel_ir = rc->priv;
 
 	if (kernel_ir->cx != NULL)
 		cx23885_input_ir_stop(kernel_ir->cx);
@@ -245,9 +242,7 @@ static void cx23885_input_ir_close(void *priv)
 int cx23885_input_init(struct cx23885_dev *dev)
 {
 	struct cx23885_kernel_ir *kernel_ir;
-	struct input_dev *inp_dev;
-	struct ir_dev_props *props;
-
+	struct rc_dev *rc;
 	char *rc_map;
 	enum rc_driver_type driver_type;
 	unsigned long allowed_protos;
@@ -267,14 +262,14 @@ int cx23885_input_init(struct cx23885_dev *dev)
 	case CX23885_BOARD_HAUPPAUGE_HVR1250:
 		/* Integrated CX2388[58] IR controller */
 		driver_type = RC_DRIVER_IR_RAW;
-		allowed_protos = IR_TYPE_ALL;
+		allowed_protos = RC_TYPE_ALL;
 		/* The grey Hauppauge RC-5 remote */
 		rc_map = RC_MAP_RC5_HAUPPAUGE_NEW;
 		break;
 	case CX23885_BOARD_TEVII_S470:
 		/* Integrated CX23885 IR controller */
 		driver_type = RC_DRIVER_IR_RAW;
-		allowed_protos = IR_TYPE_ALL;
+		allowed_protos = RC_TYPE_ALL;
 		/* A guess at the remote */
 		rc_map = RC_MAP_TEVII_NEC;
 		break;
@@ -294,37 +289,36 @@ int cx23885_input_init(struct cx23885_dev *dev)
 				    pci_name(dev->pci));
 
 	/* input device */
-	inp_dev = input_allocate_device();
-	if (inp_dev == NULL) {
+	rc = rc_allocate_device();
+	if (!rc) {
 		ret = -ENOMEM;
 		goto err_out_free;
 	}
 
-	kernel_ir->inp_dev = inp_dev;
-	inp_dev->name = kernel_ir->name;
-	inp_dev->phys = kernel_ir->phys;
-	inp_dev->id.bustype = BUS_PCI;
-	inp_dev->id.version = 1;
+	kernel_ir->rc = rc;
+	rc->input_name = kernel_ir->name;
+	rc->input_phys = kernel_ir->phys;
+	rc->input_id.bustype = BUS_PCI;
+	rc->input_id.version = 1;
 	if (dev->pci->subsystem_vendor) {
-		inp_dev->id.vendor  = dev->pci->subsystem_vendor;
-		inp_dev->id.product = dev->pci->subsystem_device;
+		rc->input_id.vendor  = dev->pci->subsystem_vendor;
+		rc->input_id.product = dev->pci->subsystem_device;
 	} else {
-		inp_dev->id.vendor  = dev->pci->vendor;
-		inp_dev->id.product = dev->pci->device;
+		rc->input_id.vendor  = dev->pci->vendor;
+		rc->input_id.product = dev->pci->device;
 	}
-	inp_dev->dev.parent = &dev->pci->dev;
-
-	/* kernel ir device properties */
-	props = &kernel_ir->props;
-	props->driver_type = driver_type;
-	props->allowed_protos = allowed_protos;
-	props->priv = kernel_ir;
-	props->open = cx23885_input_ir_open;
-	props->close = cx23885_input_ir_close;
+	rc->dev.parent = &dev->pci->dev;
+	rc->driver_type = driver_type;
+	rc->allowed_protos = allowed_protos;
+	rc->priv = kernel_ir;
+	rc->open = cx23885_input_ir_open;
+	rc->close = cx23885_input_ir_close;
+	rc->map_name = rc_map;
+	rc->driver_name = MODULE_NAME;
 
 	/* Go */
 	dev->kernel_ir = kernel_ir;
-	ret = ir_input_register(inp_dev, rc_map, props, MODULE_NAME);
+	ret = rc_register_device(rc);
 	if (ret)
 		goto err_out_stop;
 
@@ -333,7 +327,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
 err_out_stop:
 	cx23885_input_ir_stop(dev);
 	dev->kernel_ir = NULL;
-	/* TODO: double check clean-up of kernel_ir->inp_dev */
+	rc_free_device(rc);
 err_out_free:
 	kfree(kernel_ir->phys);
 	kfree(kernel_ir->name);
@@ -348,7 +342,7 @@ void cx23885_input_fini(struct cx23885_dev *dev)
 
 	if (dev->kernel_ir == NULL)
 		return;
-	ir_input_unregister(dev->kernel_ir->inp_dev);
+	rc_unregister_device(dev->kernel_ir->rc);
 	kfree(dev->kernel_ir->phys);
 	kfree(dev->kernel_ir->name);
 	kfree(dev->kernel_ir);
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index 93af9c65b48..644fcb808c0 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -26,7 +26,6 @@
 #include <linux/kmod.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/kthread.h>
@@ -743,8 +742,6 @@ static int video_open(struct file *file)
 	if (NULL == fh)
 		return -ENOMEM;
 
-	lock_kernel();
-
 	file->private_data = fh;
 	fh->dev      = dev;
 	fh->radio    = radio;
@@ -762,8 +759,6 @@ static int video_open(struct file *file)
 
 	dprintk(1, "post videobuf_queue_init()\n");
 
-	unlock_kernel();
-
 	return 0;
 }
 
@@ -1029,35 +1024,6 @@ static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
 	return 0;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv,
-	struct video_mbuf *mbuf)
-{
-	struct cx23885_fh *fh = priv;
-	struct videobuf_queue *q;
-	struct v4l2_requestbuffers req;
-	unsigned int i;
-	int err;
-
-	q = get_queue(fh);
-	memset(&req, 0, sizeof(req));
-	req.type   = q->type;
-	req.count  = 8;
-	req.memory = V4L2_MEMORY_MMAP;
-	err = videobuf_reqbufs(q, &req);
-	if (err < 0)
-		return err;
-
-	mbuf->frames = req.count;
-	mbuf->size   = 0;
-	for (i = 0; i < mbuf->frames; i++) {
-		mbuf->offsets[i]  = q->bufs[i]->boff;
-		mbuf->size       += q->bufs[i]->bsize;
-	}
-	return 0;
-}
-#endif
-
 static int vidioc_reqbufs(struct file *file, void *priv,
 	struct v4l2_requestbuffers *p)
 {
@@ -1160,7 +1126,6 @@ static int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i)
 	if (0 == INPUT(n)->type)
 		return -EINVAL;
 
-	memset(i, 0, sizeof(*i));
 	i->index = n;
 	i->type  = V4L2_INPUT_TYPE_CAMERA;
 	strcpy(i->name, iname[INPUT(n)->type]);
@@ -1432,9 +1397,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
 	.vidioc_streamon      = vidioc_streamon,
 	.vidioc_streamoff     = vidioc_streamoff,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf          = vidiocgmbuf,
-#endif
 	.vidioc_g_tuner       = vidioc_g_tuner,
 	.vidioc_s_tuner       = vidioc_s_tuner,
 	.vidioc_g_frequency   = vidioc_g_frequency,
@@ -1512,10 +1474,10 @@ int cx23885_video_register(struct cx23885_dev *dev)
 		if (dev->tuner_addr)
 			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
 				&dev->i2c_bus[1].i2c_adap,
-				NULL, "tuner", dev->tuner_addr, NULL);
+				"tuner", dev->tuner_addr, NULL);
 		else
 			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
-				&dev->i2c_bus[1].i2c_adap, NULL,
+				&dev->i2c_bus[1].i2c_adap,
 				"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV));
 		if (sd) {
 			struct tuner_setup tun_setup;
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index ed94b17dd8a..62e41ab6581 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -30,7 +30,7 @@
 #include <media/tveeprom.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/videobuf-dvb.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "btcx-risc.h"
 #include "cx23885-reg.h"
@@ -84,6 +84,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1290        26
 #define CX23885_BOARD_MYGICA_X8558PRO          27
 #define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28
+#define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID     29
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002
@@ -310,8 +311,7 @@ struct cx23885_kernel_ir {
 	char			*name;
 	char			*phys;
 
-	struct input_dev	*inp_dev;
-	struct ir_dev_props	props;
+	struct rc_dev		*rc;
 };
 
 struct cx23885_dev {
diff --git a/drivers/media/video/cx23885/cx23888-ir.c b/drivers/media/video/cx23885/cx23888-ir.c
index e78e3e4c811..e37be6fcf67 100644
--- a/drivers/media/video/cx23885/cx23888-ir.c
+++ b/drivers/media/video/cx23885/cx23888-ir.c
@@ -26,7 +26,7 @@
 
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "cx23885.h"
 
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index dfb198d0415..f16461844c5 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1989,8 +1989,23 @@ static int cx25840_probe(struct i2c_client *client,
 	v4l2_ctrl_new_std(&state->hdl, &cx25840_ctrl_ops,
 			V4L2_CID_HUE, -128, 127, 1, 0);
 	if (!is_cx2583x(state)) {
-		default_volume = 228 - cx25840_read(client, 0x8d4);
-		default_volume = ((default_volume / 2) + 23) << 9;
+		default_volume = cx25840_read(client, 0x8d4);
+		/*
+		 * Enforce the legacy PVR-350/MSP3400 to PVR-150/CX25843 volume
+		 * scale mapping limits to avoid -ERANGE errors when
+		 * initializing the volume control
+		 */
+		if (default_volume > 228) {
+			/* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */
+			default_volume = 228;
+			cx25840_write(client, 0x8d4, 228);
+		}
+		else if (default_volume < 20) {
+			/* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */
+			default_volume = 20;
+			cx25840_write(client, 0x8d4, 20);
+		}
+		default_volume = (((228 - default_volume) >> 1) + 23) << 9;
 
 		state->volume = v4l2_ctrl_new_std(&state->hdl,
 			&cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME,
diff --git a/drivers/media/video/cx25840/cx25840-ir.c b/drivers/media/video/cx25840/cx25840-ir.c
index 97a4e9b25fe..627926f6bde 100644
--- a/drivers/media/video/cx25840/cx25840-ir.c
+++ b/drivers/media/video/cx25840/cx25840-ir.c
@@ -24,7 +24,7 @@
 #include <linux/slab.h>
 #include <linux/kfifo.h>
 #include <media/cx25840.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 
 #include "cx25840-core.h"
 
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 0fa85cbefbb..5c42abdf422 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -1,12 +1,11 @@
 config VIDEO_CX88
 	tristate "Conexant 2388x (bt878 successor) support"
-	depends on VIDEO_DEV && PCI && I2C && INPUT
+	depends on VIDEO_DEV && PCI && I2C && RC_CORE
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on VIDEO_IR
 	select VIDEO_WM8775 if VIDEO_HELPER_CHIPS_AUTO
 	---help---
 	  This is a video4linux driver for Conexant 2388x based
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 4aaa47c0eab..54b7fcd469a 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -40,7 +40,6 @@
 #include <sound/control.h>
 #include <sound/initval.h>
 #include <sound/tlv.h>
-#include <media/wm8775.h>
 
 #include "cx88.h"
 #include "cx88-reg.h"
@@ -587,47 +586,26 @@ static int snd_cx88_volume_put(struct snd_kcontrol *kcontrol,
 	int left, right, v, b;
 	int changed = 0;
 	u32 old;
-	struct v4l2_control client_ctl;
-
-	/* Pass volume & balance onto any WM8775 */
-	if (value->value.integer.value[0] >= value->value.integer.value[1]) {
-		v = value->value.integer.value[0] << 10;
-		b = value->value.integer.value[0] ?
-			(0x8000 * value->value.integer.value[1]) / value->value.integer.value[0] :
-			0x8000;
-	} else {
-		v = value->value.integer.value[1] << 10;
-		b = value->value.integer.value[1] ?
-		0xffff - (0x8000 * value->value.integer.value[0]) / value->value.integer.value[1] :
-		0x8000;
-	}
-	client_ctl.value = v;
-	client_ctl.id = V4L2_CID_AUDIO_VOLUME;
-	call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
-	client_ctl.value = b;
-	client_ctl.id = V4L2_CID_AUDIO_BALANCE;
-	call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
 
 	left = value->value.integer.value[0] & 0x3f;
 	right = value->value.integer.value[1] & 0x3f;
 	b = right - left;
 	if (b < 0) {
-		v = 0x3f - left;
-		b = (-b) | 0x40;
+	    v = 0x3f - left;
+	    b = (-b) | 0x40;
 	} else {
-		v = 0x3f - right;
+	    v = 0x3f - right;
 	}
 	/* Do we really know this will always be called with IRQs on? */
 	spin_lock_irq(&chip->reg_lock);
 	old = cx_read(AUD_VOL_CTL);
 	if (v != (old & 0x3f)) {
-		cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, (old & ~0x3f) | v);
-		changed = 1;
+	    cx_write(AUD_VOL_CTL, (old & ~0x3f) | v);
+	    changed = 1;
 	}
-	if ((cx_read(AUD_BAL_CTL) & 0x7f) != b) {
-		cx_write(AUD_BAL_CTL, b);
-		changed = 1;
+	if (cx_read(AUD_BAL_CTL) != b) {
+	    cx_write(AUD_BAL_CTL, b);
+	    changed = 1;
 	}
 	spin_unlock_irq(&chip->reg_lock);
 
@@ -640,7 +618,7 @@ static const struct snd_kcontrol_new snd_cx88_volume = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
 		  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
-	.name = "Analog-TV Volume",
+	.name = "Playback Volume",
 	.info = snd_cx88_volume_info,
 	.get = snd_cx88_volume_get,
 	.put = snd_cx88_volume_put,
@@ -671,14 +649,7 @@ static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol,
 	vol = cx_read(AUD_VOL_CTL);
 	if (value->value.integer.value[0] != !(vol & bit)) {
 		vol ^= bit;
-		cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol);
-		/* Pass mute onto any WM8775 */
-		if ((1<<6) == bit) {
-			struct v4l2_control client_ctl;
-			client_ctl.value = 0 != (vol & bit);
-			client_ctl.id = V4L2_CID_AUDIO_MUTE;
-			call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-		}
+		cx_write(AUD_VOL_CTL, vol);
 		ret = 1;
 	}
 	spin_unlock_irq(&chip->reg_lock);
@@ -687,7 +658,7 @@ static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol,
 
 static const struct snd_kcontrol_new snd_cx88_dac_switch = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name = "Audio-Out Switch",
+	.name = "Playback Switch",
 	.info = snd_ctl_boolean_mono_info,
 	.get = snd_cx88_switch_get,
 	.put = snd_cx88_switch_put,
@@ -696,49 +667,13 @@ static const struct snd_kcontrol_new snd_cx88_dac_switch = {
 
 static const struct snd_kcontrol_new snd_cx88_source_switch = {
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name = "Analog-TV Switch",
+	.name = "Capture Switch",
 	.info = snd_ctl_boolean_mono_info,
 	.get = snd_cx88_switch_get,
 	.put = snd_cx88_switch_put,
 	.private_value = (1<<6),
 };
 
-static int snd_cx88_alc_get(struct snd_kcontrol *kcontrol,
-			       struct snd_ctl_elem_value *value)
-{
-	snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
-	struct cx88_core *core = chip->core;
-	struct v4l2_control client_ctl;
-
-	client_ctl.id = V4L2_CID_AUDIO_LOUDNESS;
-	call_hw(core, WM8775_GID, core, g_ctrl, &client_ctl);
-	value->value.integer.value[0] = client_ctl.value ? 1 : 0;
-
-	return 0;
-}
-
-static int snd_cx88_alc_put(struct snd_kcontrol *kcontrol,
-				       struct snd_ctl_elem_value *value)
-{
-	snd_cx88_card_t *chip = snd_kcontrol_chip(kcontrol);
-	struct cx88_core *core = chip->core;
-	struct v4l2_control client_ctl;
-
-	client_ctl.value = 0 != value->value.integer.value[0];
-	client_ctl.id = V4L2_CID_AUDIO_LOUDNESS;
-	call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
-	return 0;
-}
-
-static struct snd_kcontrol_new snd_cx88_alc_switch = {
-	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
-	.name = "Line-In ALC Switch",
-	.info = snd_ctl_boolean_mono_info,
-	.get = snd_cx88_alc_get,
-	.put = snd_cx88_alc_put,
-};
-
 /****************************************************************************
 			Basic Flow for Sound Devices
  ****************************************************************************/
@@ -860,7 +795,6 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci,
 {
 	struct snd_card  *card;
 	snd_cx88_card_t  *chip;
-	struct v4l2_subdev *sd;
 	int              err;
 
 	if (devno >= SNDRV_CARDS)
@@ -896,15 +830,6 @@ static int __devinit cx88_audio_initdev(struct pci_dev *pci,
 	if (err < 0)
 		goto error;
 
-	/* If there's a wm8775 then add a Line-In ALC switch */
-	list_for_each_entry(sd, &chip->core->v4l2_dev.subdevs, list) {
-		if (WM8775_GID == sd->grp_id) {
-			snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch,
-						       chip));
-			break;
-		}
-	}
-
 	strcpy (card->driver, "CX88x");
 	sprintf(card->shortname, "Conexant CX%x", pci->device);
 	sprintf(card->longname, "%s at %#llx",
diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c
index 417d1d5c73c..bca307eb1e2 100644
--- a/drivers/media/video/cx88/cx88-blackbird.c
+++ b/drivers/media/video/cx88/cx88-blackbird.c
@@ -33,7 +33,6 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/firmware.h>
-#include <linux/smp_lock.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/cx2341x.h>
@@ -1065,7 +1064,7 @@ static int mpeg_open(struct file *file)
 		err = drv->request_acquire(drv);
 		if(err != 0) {
 			dprintk(1,"%s: Unable to acquire hardware, %d\n", __func__, err);
-			mutex_unlock(&dev->core->lock);;
+			mutex_unlock(&dev->core->lock);
 			return err;
 		}
 	}
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index b26fcba8600..4e6ee5584cb 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -47,7 +47,7 @@ MODULE_PARM_DESC(latency,"pci latency timer");
 
 static int disable_ir;
 module_param(disable_ir, int, 0444);
-MODULE_PARM_DESC(latency, "Disable IR support");
+MODULE_PARM_DESC(disable_ir, "Disable IR support");
 
 #define info_printk(core, fmt, arg...) \
 	printk(KERN_INFO "%s: " fmt, core->name , ## arg)
@@ -1007,15 +1007,22 @@ static const struct cx88_board cx88_boards[] = {
 		.radio_type	= UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
+		.audio_chip = V4L2_IDENT_WM8775,
 		.input		= {{
 			.type	= CX88_VMUX_DVB,
 			.vmux	= 0,
+			/* 2: Line-In */
+			.audioroute = 2,
 		},{
 			.type	= CX88_VMUX_COMPOSITE1,
 			.vmux	= 1,
+			/* 2: Line-In */
+			.audioroute = 2,
 		},{
 			.type	= CX88_VMUX_SVIDEO,
 			.vmux	= 2,
+			/* 2: Line-In */
+			.audioroute = 2,
 		}},
 		.mpeg           = CX88_MPEG_DVB,
 	},
@@ -3515,19 +3522,18 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
 		   later code configures a tea5767.
 		 */
 		v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
-				NULL, "tuner",
-				0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+				"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
 		if (has_demod)
 			v4l2_i2c_new_subdev(&core->v4l2_dev,
-				&core->i2c_adap, NULL, "tuner",
+				&core->i2c_adap, "tuner",
 				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		if (core->board.tuner_addr == ADDR_UNSET) {
 			v4l2_i2c_new_subdev(&core->v4l2_dev,
-				&core->i2c_adap, NULL, "tuner",
+				&core->i2c_adap, "tuner",
 				0, has_demod ? tv_addrs + 4 : tv_addrs);
 		} else {
 			v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
-				NULL, "tuner", core->board.tuner_addr, NULL);
+				"tuner", core->board.tuner_addr, NULL);
 		}
 	}
 
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 367a653f4c9..90717ee944e 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -67,6 +67,10 @@ static unsigned int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug,"enable debug messages [dvb]");
 
+static unsigned int dvb_buf_tscnt = 32;
+module_param(dvb_buf_tscnt, int, 0644);
+MODULE_PARM_DESC(dvb_buf_tscnt, "DVB Buffer TS count [dvb]");
+
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 #define dprintk(level,fmt, arg...)	if (debug >= level) \
@@ -80,10 +84,10 @@ static int dvb_buf_setup(struct videobuf_queue *q,
 	struct cx8802_dev *dev = q->priv_data;
 
 	dev->ts_packet_size  = 188 * 4;
-	dev->ts_packet_count = 32;
+	dev->ts_packet_count = dvb_buf_tscnt;
 
 	*size  = dev->ts_packet_size * dev->ts_packet_count;
-	*count = 32;
+	*count = dvb_buf_tscnt;
 	return 0;
 }
 
diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c
index f53836bb6a5..a1fe0abb6e4 100644
--- a/drivers/media/video/cx88/cx88-i2c.c
+++ b/drivers/media/video/cx88/cx88-i2c.c
@@ -146,7 +146,6 @@ int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
 	core->i2c_adap.dev.parent = &pci->dev;
 	strlcpy(core->i2c_adap.name,core->name,sizeof(core->i2c_adap.name));
 	core->i2c_adap.owner = THIS_MODULE;
-	core->i2c_adap.id = I2C_HW_B_CX2388x;
 	core->i2c_algo.udelay = i2c_udelay;
 	core->i2c_algo.data = core;
 	i2c_set_adapdata(&core->i2c_adap, &core->v4l2_dev);
diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c
index fc777bc6e71..06f7d1d0094 100644
--- a/drivers/media/video/cx88/cx88-input.c
+++ b/drivers/media/video/cx88/cx88-input.c
@@ -24,14 +24,12 @@
 
 #include <linux/init.h>
 #include <linux/hrtimer.h>
-#include <linux/input.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 
 #include "cx88.h"
-#include <media/ir-core.h>
-#include <media/ir-common.h>
+#include <media/rc-core.h>
 
 #define MODULE_NAME "cx88xx"
 
@@ -39,9 +37,7 @@
 
 struct cx88_IR {
 	struct cx88_core *core;
-	struct input_dev *input;
-	struct ir_dev_props props;
-	u64 ir_type;
+	struct rc_dev *dev;
 
 	int users;
 
@@ -50,8 +46,6 @@ struct cx88_IR {
 
 	/* sample from gpio pin 16 */
 	u32 sampling;
-	u32 samples[16];
-	int scount;
 
 	/* poll external decoder */
 	int polling;
@@ -63,6 +57,10 @@ struct cx88_IR {
 	u32 mask_keyup;
 };
 
+static unsigned ir_samplerate = 4;
+module_param(ir_samplerate, uint, 0444);
+MODULE_PARM_DESC(ir_samplerate, "IR samplerate in kHz, 1 - 20, default 4");
+
 static int ir_debug;
 module_param(ir_debug, int, 0644);	/* debug level [IR] */
 MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
@@ -70,6 +68,9 @@ MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
 #define ir_dprintk(fmt, arg...)	if (ir_debug) \
 	printk(KERN_DEBUG "%s IR: " fmt , ir->core->name , ##arg)
 
+#define dprintk(fmt, arg...)	if (ir_debug) \
+	printk(KERN_DEBUG "cx88 IR: " fmt , ##arg)
+
 /* ---------------------------------------------------------------------- */
 
 static void cx88_ir_handle_key(struct cx88_IR *ir)
@@ -125,21 +126,26 @@ static void cx88_ir_handle_key(struct cx88_IR *ir)
 
 		data = (data << 4) | ((gpio_key & 0xf0) >> 4);
 
-		ir_keydown(ir->input, data, 0);
+		rc_keydown(ir->dev, data, 0);
 
 	} else if (ir->mask_keydown) {
 		/* bit set on keydown */
 		if (gpio & ir->mask_keydown)
-			ir_keydown(ir->input, data, 0);
+			rc_keydown_notimeout(ir->dev, data, 0);
+		else
+			rc_keyup(ir->dev);
 
 	} else if (ir->mask_keyup) {
 		/* bit cleared on keydown */
 		if (0 == (gpio & ir->mask_keyup))
-			ir_keydown(ir->input, data, 0);
+			rc_keydown_notimeout(ir->dev, data, 0);
+		else
+			rc_keyup(ir->dev);
 
 	} else {
 		/* can't distinguish keydown/up :-/ */
-		ir_keydown(ir->input, data, 0);
+		rc_keydown_notimeout(ir->dev, data, 0);
+		rc_keyup(ir->dev);
 	}
 }
 
@@ -176,8 +182,8 @@ static int __cx88_ir_start(void *priv)
 	}
 	if (ir->sampling) {
 		core->pci_irqmask |= PCI_INT_IR_SMPINT;
-		cx_write(MO_DDS_IO, 0xa80a80);	/* 4 kHz sample rate */
-		cx_write(MO_DDSCFG_IO, 0x5);	/* enable */
+		cx_write(MO_DDS_IO, 0x33F286 * ir_samplerate); /* samplerate */
+		cx_write(MO_DDSCFG_IO, 0x5); /* enable */
 	}
 	return 0;
 }
@@ -214,17 +220,17 @@ void cx88_ir_stop(struct cx88_core *core)
 		__cx88_ir_stop(core);
 }
 
-static int cx88_ir_open(void *priv)
+static int cx88_ir_open(struct rc_dev *rc)
 {
-	struct cx88_core *core = priv;
+	struct cx88_core *core = rc->priv;
 
 	core->ir->users++;
 	return __cx88_ir_start(core);
 }
 
-static void cx88_ir_close(void *priv)
+static void cx88_ir_close(struct rc_dev *rc)
 {
-	struct cx88_core *core = priv;
+	struct cx88_core *core = rc->priv;
 
 	core->ir->users--;
 	if (!core->ir->users)
@@ -236,20 +242,20 @@ static void cx88_ir_close(void *priv)
 int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 {
 	struct cx88_IR *ir;
-	struct input_dev *input_dev;
+	struct rc_dev *dev;
 	char *ir_codes = NULL;
-	u64 ir_type = IR_TYPE_OTHER;
+	u64 rc_type = RC_TYPE_OTHER;
 	int err = -ENOMEM;
 	u32 hardware_mask = 0;	/* For devices with a hardware mask, when
 				 * used with a full-code IR table
 				 */
 
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev)
+	dev = rc_allocate_device();
+	if (!ir || !dev)
 		goto err_out_free;
 
-	ir->input = input_dev;
+	ir->dev = dev;
 
 	/* detect & configure */
 	switch (core->boardnr) {
@@ -264,7 +270,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
 		ir_codes = RC_MAP_CINERGY_1400;
-		ir_type = IR_TYPE_NEC;
 		ir->sampling = 0xeb04; /* address */
 		break;
 	case CX88_BOARD_HAUPPAUGE:
@@ -279,7 +284,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	case CX88_BOARD_PCHDTV_HD5500:
 	case CX88_BOARD_HAUPPAUGE_IRONLY:
 		ir_codes = RC_MAP_HAUPPAUGE_NEW;
-		ir_type = IR_TYPE_RC5;
 		ir->sampling = 1;
 		break;
 	case CX88_BOARD_WINFAST_DTV2000H:
@@ -367,18 +371,15 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	case CX88_BOARD_PROF_7301:
 	case CX88_BOARD_PROF_6200:
 		ir_codes = RC_MAP_TBS_NEC;
-		ir_type = IR_TYPE_NEC;
 		ir->sampling = 0xff00; /* address */
 		break;
 	case CX88_BOARD_TEVII_S460:
 	case CX88_BOARD_TEVII_S420:
 		ir_codes = RC_MAP_TEVII_NEC;
-		ir_type = IR_TYPE_NEC;
 		ir->sampling = 0xff00; /* address */
 		break;
 	case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
 		ir_codes         = RC_MAP_DNTV_LIVE_DVBT_PRO;
-		ir_type          = IR_TYPE_NEC;
 		ir->sampling     = 0xff00; /* address */
 		break;
 	case CX88_BOARD_NORWOOD_MICRO:
@@ -396,7 +397,6 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 		ir_codes         = RC_MAP_PINNACLE_PCTV_HD;
-		ir_type          = IR_TYPE_RC5;
 		ir->sampling     = 1;
 		break;
 	case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
@@ -407,12 +407,12 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 		break;
 	case CX88_BOARD_TWINHAN_VP1027_DVBS:
 		ir_codes         = RC_MAP_TWINHAN_VP1027_DVBS;
-		ir_type          = IR_TYPE_NEC;
+		rc_type          = RC_TYPE_NEC;
 		ir->sampling     = 0xff00; /* address */
 		break;
 	}
 
-	if (NULL == ir_codes) {
+	if (!ir_codes) {
 		err = -ENODEV;
 		goto err_out_free;
 	}
@@ -436,37 +436,45 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
 	snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
 
-	ir->ir_type = ir_type;
-
-	input_dev->name = ir->name;
-	input_dev->phys = ir->phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	dev->input_name = ir->name;
+	dev->input_phys = ir->phys;
+	dev->input_id.bustype = BUS_PCI;
+	dev->input_id.version = 1;
 	if (pci->subsystem_vendor) {
-		input_dev->id.vendor = pci->subsystem_vendor;
-		input_dev->id.product = pci->subsystem_device;
+		dev->input_id.vendor = pci->subsystem_vendor;
+		dev->input_id.product = pci->subsystem_device;
 	} else {
-		input_dev->id.vendor = pci->vendor;
-		input_dev->id.product = pci->device;
+		dev->input_id.vendor = pci->vendor;
+		dev->input_id.product = pci->device;
 	}
-	input_dev->dev.parent = &pci->dev;
-	/* record handles to ourself */
+	dev->dev.parent = &pci->dev;
+	dev->map_name = ir_codes;
+	dev->driver_name = MODULE_NAME;
+	dev->priv = core;
+	dev->open = cx88_ir_open;
+	dev->close = cx88_ir_close;
+	dev->scanmask = hardware_mask;
+
+	if (ir->sampling) {
+		dev->driver_type = RC_DRIVER_IR_RAW;
+		dev->timeout = 10 * 1000 * 1000; /* 10 ms */
+	} else {
+		dev->driver_type = RC_DRIVER_SCANCODE;
+		dev->allowed_protos = rc_type;
+	}
+
 	ir->core = core;
 	core->ir = ir;
 
-	ir->props.priv = core;
-	ir->props.open = cx88_ir_open;
-	ir->props.close = cx88_ir_close;
-	ir->props.scanmask = hardware_mask;
-
 	/* all done */
-	err = ir_input_register(ir->input, ir_codes, &ir->props, MODULE_NAME);
+	err = rc_register_device(dev);
 	if (err)
 		goto err_out_free;
 
 	return 0;
 
- err_out_free:
+err_out_free:
+	rc_free_device(dev);
 	core->ir = NULL;
 	kfree(ir);
 	return err;
@@ -481,7 +489,7 @@ int cx88_ir_fini(struct cx88_core *core)
 		return 0;
 
 	cx88_ir_stop(core);
-	ir_input_unregister(ir->input);
+	rc_unregister_device(ir->dev);
 	kfree(ir);
 
 	/* done */
@@ -494,135 +502,75 @@ int cx88_ir_fini(struct cx88_core *core)
 void cx88_ir_irq(struct cx88_core *core)
 {
 	struct cx88_IR *ir = core->ir;
-	u32 samples, ircode;
-	int i, start, range, toggle, dev, code;
+	u32 samples;
+	unsigned todo, bits;
+	struct ir_raw_event ev;
 
-	if (NULL == ir)
-		return;
-	if (!ir->sampling)
+	if (!ir || !ir->sampling)
 		return;
 
+	/*
+	 * Samples are stored in a 32 bit register, oldest sample in
+	 * the msb. A set bit represents space and an unset bit
+	 * represents a pulse.
+	 */
 	samples = cx_read(MO_SAMPLE_IO);
-	if (0 != samples && 0xffffffff != samples) {
-		/* record sample data */
-		if (ir->scount < ARRAY_SIZE(ir->samples))
-			ir->samples[ir->scount++] = samples;
-		return;
-	}
-	if (!ir->scount) {
-		/* nothing to sample */
-		return;
-	}
-
-	/* have a complete sample */
-	if (ir->scount < ARRAY_SIZE(ir->samples))
-		ir->samples[ir->scount++] = samples;
-	for (i = 0; i < ir->scount; i++)
-		ir->samples[i] = ~ir->samples[i];
-	if (ir_debug)
-		ir_dump_samples(ir->samples, ir->scount);
 
-	/* decode it */
-	switch (core->boardnr) {
-	case CX88_BOARD_TEVII_S460:
-	case CX88_BOARD_TEVII_S420:
-	case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
-	case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
-	case CX88_BOARD_OMICOM_SS4_PCI:
-	case CX88_BOARD_SATTRADE_ST4200:
-	case CX88_BOARD_TBS_8920:
-	case CX88_BOARD_TBS_8910:
-	case CX88_BOARD_PROF_7300:
-	case CX88_BOARD_PROF_7301:
-	case CX88_BOARD_PROF_6200:
-	case CX88_BOARD_TWINHAN_VP1027_DVBS:
-		ircode = ir_decode_pulsedistance(ir->samples, ir->scount, 1, 4);
-
-		if (ircode == 0xffffffff) { /* decoding error */
-			ir_dprintk("pulse distance decoding error\n");
-			break;
-		}
-
-		ir_dprintk("pulse distance decoded: %x\n", ircode);
+	if (samples == 0xff && ir->dev->idle)
+		return;
 
-		if (ircode == 0) { /* key still pressed */
-			ir_dprintk("pulse distance decoded repeat code\n");
-			ir_repeat(ir->input);
-			break;
-		}
+	init_ir_raw_event(&ev);
+	for (todo = 32; todo > 0; todo -= bits) {
+		ev.pulse = samples & 0x80000000 ? false : true;
+		bits = min(todo, 32U - fls(ev.pulse ? samples : ~samples));
+		ev.duration = (bits * NSEC_PER_SEC) / (1000 * ir_samplerate);
+		ir_raw_event_store_with_filter(ir->dev, &ev);
+		samples <<= bits;
+	}
+	ir_raw_event_handle(ir->dev);
+}
 
-		if ((ircode & 0xffff) != (ir->sampling & 0xffff)) { /* wrong address */
-			ir_dprintk("pulse distance decoded wrong address\n");
-			break;
-		}
+static int get_key_pvr2000(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+	int flags, code;
 
-		if (((~ircode >> 24) & 0xff) != ((ircode >> 16) & 0xff)) { /* wrong checksum */
-			ir_dprintk("pulse distance decoded wrong check sum\n");
-			break;
-		}
+	/* poll IR chip */
+	flags = i2c_smbus_read_byte_data(ir->c, 0x10);
+	if (flags < 0) {
+		dprintk("read error\n");
+		return 0;
+	}
+	/* key pressed ? */
+	if (0 == (flags & 0x80))
+		return 0;
 
-		ir_dprintk("Key Code: %x\n", (ircode >> 16) & 0xff);
-		ir_keydown(ir->input, (ircode >> 16) & 0xff, 0);
-		break;
-	case CX88_BOARD_HAUPPAUGE:
-	case CX88_BOARD_HAUPPAUGE_DVB_T1:
-	case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
-	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
-	case CX88_BOARD_HAUPPAUGE_HVR1100:
-	case CX88_BOARD_HAUPPAUGE_HVR3000:
-	case CX88_BOARD_HAUPPAUGE_HVR4000:
-	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
-	case CX88_BOARD_PCHDTV_HD3000:
-	case CX88_BOARD_PCHDTV_HD5500:
-	case CX88_BOARD_HAUPPAUGE_IRONLY:
-		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
-		ir_dprintk("biphase decoded: %x\n", ircode);
-		/*
-		 * RC5 has an extension bit which adds a new range
-		 * of available codes, this is detected here. Also
-		 * hauppauge remotes (black/silver) always use
-		 * specific device ids. If we do not filter the
-		 * device ids then messages destined for devices
-		 * such as TVs (id=0) will get through to the
-		 * device causing mis-fired events.
-		 */
-		/* split rc5 data block ... */
-		start = (ircode & 0x2000) >> 13;
-		range = (ircode & 0x1000) >> 12;
-		toggle= (ircode & 0x0800) >> 11;
-		dev   = (ircode & 0x07c0) >> 6;
-		code  = (ircode & 0x003f) | ((range << 6) ^ 0x0040);
-		if( start != 1)
-			/* no key pressed */
-			break;
-		if ( dev != 0x1e && dev != 0x1f )
-			/* not a hauppauge remote */
-			break;
-		ir_keydown(ir->input, code, toggle);
-		break;
-	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
-		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
-		ir_dprintk("biphase decoded: %x\n", ircode);
-		if ((ircode & 0xfffff000) != 0x3000)
-			break;
-		/* Note: bit 0x800 being the toggle is assumed, not checked
-		   with real hardware  */
-		ir_keydown(ir->input, ircode & 0x3f, ircode & 0x0800 ? 1 : 0);
-		break;
+	/* read actual key code */
+	code = i2c_smbus_read_byte_data(ir->c, 0x00);
+	if (code < 0) {
+		dprintk("read error\n");
+		return 0;
 	}
 
-	ir->scount = 0;
-	return;
-}
+	dprintk("IR Key/Flags: (0x%02x/0x%02x)\n",
+		   code & 0xff, flags & 0xff);
 
+	*ir_key = code & 0xff;
+	*ir_raw = code;
+	return 1;
+}
 
 void cx88_i2c_init_ir(struct cx88_core *core)
 {
 	struct i2c_board_info info;
-	const unsigned short addr_list[] = {
+	const unsigned short default_addr_list[] = {
 		0x18, 0x6b, 0x71,
 		I2C_CLIENT_END
 	};
+	const unsigned short pvr2000_addr_list[] = {
+		0x18, 0x1a,
+		I2C_CLIENT_END
+	};
+	const unsigned short *addr_list = default_addr_list;
 	const unsigned short *addrp;
 	/* Instantiate the IR receiver device, if present */
 	if (0 != core->i2c_rc)
@@ -631,6 +579,16 @@ void cx88_i2c_init_ir(struct cx88_core *core)
 	memset(&info, 0, sizeof(struct i2c_board_info));
 	strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
 
+	switch (core->boardnr) {
+	case CX88_BOARD_LEADTEK_PVR2000:
+		addr_list = pvr2000_addr_list;
+		core->init_data.name = "cx88 Leadtek PVR 2000 remote";
+		core->init_data.type = RC_TYPE_UNKNOWN;
+		core->init_data.get_key = get_key_pvr2000;
+		core->init_data.ir_codes = RC_MAP_EMPTY;
+		break;
+	}
+
 	/*
 	 * We can't call i2c_new_probed_device() because it uses
 	 * quick writes for probing and at least some RC receiver
@@ -646,7 +604,7 @@ void cx88_i2c_init_ir(struct cx88_core *core)
 			/* Hauppauge XVR */
 			core->init_data.name = "cx88 Hauppauge XVR remote";
 			core->init_data.ir_codes = RC_MAP_HAUPPAUGE_NEW;
-			core->init_data.type = IR_TYPE_RC5;
+			core->init_data.type = RC_TYPE_RC5;
 			core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
 
 			info.platform_data = &core->init_data;
diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c
index f7d71acbb07..addf9545e9b 100644
--- a/drivers/media/video/cx88/cx88-mpeg.c
+++ b/drivers/media/video/cx88/cx88-mpeg.c
@@ -66,8 +66,14 @@ static void request_modules(struct cx8802_dev *dev)
 	INIT_WORK(&dev->request_module_wk, request_module_async);
 	schedule_work(&dev->request_module_wk);
 }
+
+static void flush_request_modules(struct cx8802_dev *dev)
+{
+	flush_work_sync(&dev->request_module_wk);
+}
 #else
 #define request_modules(dev)
+#define flush_request_modules(dev)
 #endif /* CONFIG_MODULES */
 
 
@@ -819,6 +825,8 @@ static void __devexit cx8802_remove(struct pci_dev *pci_dev)
 
 	dprintk( 1, "%s\n", __func__);
 
+	flush_request_modules(dev);
+
 	if (!list_empty(&dev->drvlist)) {
 		struct cx8802_driver *drv, *tmp;
 		int err;
diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c
index d2f159daa8b..508dabbed98 100644
--- a/drivers/media/video/cx88/cx88-video.c
+++ b/drivers/media/video/cx88/cx88-video.c
@@ -31,7 +31,6 @@
 #include <linux/kmod.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/interrupt.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
@@ -41,7 +40,6 @@
 #include "cx88.h"
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
-#include <media/wm8775.h>
 
 MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
@@ -978,7 +976,6 @@ int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl)
 	const struct cx88_ctrl *c = NULL;
 	u32 value,mask;
 	int i;
-	struct v4l2_control client_ctl;
 
 	for (i = 0; i < CX8800_CTLS; i++) {
 		if (cx8800_ctls[i].v.id == ctl->id) {
@@ -992,27 +989,6 @@ int cx88_set_control(struct cx88_core *core, struct v4l2_control *ctl)
 		ctl->value = c->v.minimum;
 	if (ctl->value > c->v.maximum)
 		ctl->value = c->v.maximum;
-
-	/* Pass changes onto any WM8775 */
-	client_ctl.id = ctl->id;
-	switch (ctl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		client_ctl.value = ctl->value;
-		break;
-	case V4L2_CID_AUDIO_VOLUME:
-		client_ctl.value = (ctl->value) ?
-			(0x90 + ctl->value) << 8 : 0;
-		break;
-	case V4L2_CID_AUDIO_BALANCE:
-		client_ctl.value = ctl->value << 9;
-		break;
-	default:
-		client_ctl.id = 0;
-		break;
-	}
-	if (client_ctl.id)
-		call_hw(core, WM8775_GID, core, s_ctrl, &client_ctl);
-
 	mask=c->mask;
 	switch (ctl->id) {
 	case V4L2_CID_AUDIO_BALANCE:
@@ -1180,15 +1156,6 @@ static int vidioc_enum_fmt_vid_cap (struct file *file, void  *priv,
 	return 0;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf (struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct cx8800_fh           *fh  = priv;
-
-	return videobuf_cgmbuf (get_queue(fh), mbuf, 8);
-}
-#endif
-
 static int vidioc_reqbufs (struct file *file, void *priv, struct v4l2_requestbuffers *p)
 {
 	struct cx8800_fh  *fh   = priv;
@@ -1559,9 +1526,7 @@ static int radio_queryctrl (struct file *file, void *priv,
 	if (c->id <  V4L2_CID_BASE ||
 		c->id >= V4L2_CID_LASTP1)
 		return -EINVAL;
-	if (c->id == V4L2_CID_AUDIO_MUTE ||
-		c->id == V4L2_CID_AUDIO_VOLUME ||
-		c->id == V4L2_CID_AUDIO_BALANCE) {
+	if (c->id == V4L2_CID_AUDIO_MUTE) {
 		for (i = 0; i < CX8800_CTLS; i++) {
 			if (cx8800_ctls[i].v.id == c->id)
 				break;
@@ -1732,9 +1697,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
 	.vidioc_streamon      = vidioc_streamon,
 	.vidioc_streamoff     = vidioc_streamoff,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf          = vidiocgmbuf,
-#endif
 	.vidioc_g_tuner       = vidioc_g_tuner,
 	.vidioc_s_tuner       = vidioc_s_tuner,
 	.vidioc_g_frequency   = vidioc_g_frequency,
@@ -1896,14 +1858,13 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev,
 
 	if (core->board.audio_chip == V4L2_IDENT_WM8775)
 		v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
-				NULL, "wm8775", 0x36 >> 1, NULL);
+				"wm8775", 0x36 >> 1, NULL);
 
 	if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) {
 		/* This probes for a tda9874 as is used on some
 		   Pixelview Ultra boards. */
-		v4l2_i2c_new_subdev(&core->v4l2_dev,
-				&core->i2c_adap,
-				NULL, "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
+		v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
+				"tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
 	}
 
 	switch (core->boardnr) {
diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/video/cx88/cx88-vp3054-i2c.c
index ec5476d8b10..d77f8ecab9d 100644
--- a/drivers/media/video/cx88/cx88-vp3054-i2c.c
+++ b/drivers/media/video/cx88/cx88-vp3054-i2c.c
@@ -125,7 +125,6 @@ int vp3054_i2c_probe(struct cx8802_dev *dev)
 	strlcpy(vp3054_i2c->adap.name, core->name,
 		sizeof(vp3054_i2c->adap.name));
 	vp3054_i2c->adap.owner = THIS_MODULE;
-	vp3054_i2c->adap.id = I2C_HW_B_CX2388x;
 	vp3054_i2c->algo.data = dev;
 	i2c_set_adapdata(&vp3054_i2c->adap, dev);
 	vp3054_i2c->adap.algo_data = &vp3054_i2c->algo;
diff --git a/drivers/media/video/cx88/cx88.h b/drivers/media/video/cx88/cx88.h
index e8c732e7ae4..c9981e77416 100644
--- a/drivers/media/video/cx88/cx88.h
+++ b/drivers/media/video/cx88/cx88.h
@@ -398,19 +398,17 @@ static inline struct cx88_core *to_core(struct v4l2_device *v4l2_dev)
 	return container_of(v4l2_dev, struct cx88_core, v4l2_dev);
 }
 
-#define call_hw(core, grpid, o, f, args...) \
+#define call_all(core, o, f, args...) 				\
 	do {							\
 		if (!core->i2c_rc) {				\
 			if (core->gate_ctrl)			\
 				core->gate_ctrl(core, 1);	\
-			v4l2_device_call_all(&core->v4l2_dev, grpid, o, f, ##args); \
+			v4l2_device_call_all(&core->v4l2_dev, 0, o, f, ##args); \
 			if (core->gate_ctrl)			\
 				core->gate_ctrl(core, 0);	\
 		}						\
 	} while (0)
 
-#define call_all(core, o, f, args...) call_hw(core, 0, o, f, ##args)
-
 struct cx8800_dev;
 struct cx8802_dev;
 
diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
index d8e38cc4ec4..353eadaa823 100644
--- a/drivers/media/video/davinci/vpfe_capture.c
+++ b/drivers/media/video/davinci/vpfe_capture.c
@@ -1276,7 +1276,7 @@ static int vpfe_videobuf_prepare(struct videobuf_queue *vq,
 		vb->size = vpfe_dev->fmt.fmt.pix.sizeimage;
 		vb->field = field;
 
-		ret = videobuf_iolock(vq, vb, NULL);;
+		ret = videobuf_iolock(vq, vb, NULL);
 		if (ret < 0)
 			return ret;
 
@@ -1986,7 +1986,6 @@ static __init int vpfe_probe(struct platform_device *pdev)
 		vpfe_dev->sd[i] =
 			v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
 						  i2c_adap,
-						  NULL,
 						  &sdinfo->board_info,
 						  NULL);
 		if (vpfe_dev->sd[i]) {
diff --git a/drivers/media/video/davinci/vpif_capture.c b/drivers/media/video/davinci/vpif_capture.c
index 6ac6acd1635..193abab6b35 100644
--- a/drivers/media/video/davinci/vpif_capture.c
+++ b/drivers/media/video/davinci/vpif_capture.c
@@ -2013,7 +2013,6 @@ static __init int vpif_probe(struct platform_device *pdev)
 		vpif_obj.sd[i] =
 			v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
 						  i2c_adap,
-						  NULL,
 						  &subdevdata->board_info,
 						  NULL);
 
diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c
index 685f6a6ee60..412c65d54fe 100644
--- a/drivers/media/video/davinci/vpif_display.c
+++ b/drivers/media/video/davinci/vpif_display.c
@@ -1553,7 +1553,7 @@ static __init int vpif_probe(struct platform_device *pdev)
 
 	for (i = 0; i < subdev_count; i++) {
 		vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
-						i2c_adap, NULL,
+						i2c_adap,
 						&subdevdata[i].board_info,
 						NULL);
 		if (!vpif_obj.sd[i]) {
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 66aefd6eef5..985100ea17a 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,9 +1,9 @@
 config VIDEO_EM28XX
 	tristate "Empia EM28xx USB video capture support"
-	depends on VIDEO_DEV && I2C && INPUT
+	depends on VIDEO_DEV && I2C
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on VIDEO_IR
+	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
@@ -37,6 +37,7 @@ config VIDEO_EM28XX_DVB
 	select DVB_LGDT330X if !DVB_FE_CUSTOMISE
 	select DVB_ZL10353 if !DVB_FE_CUSTOMISE
 	select DVB_TDA10023 if !DVB_FE_CUSTOMISE
+	select DVB_S921 if !DVB_FE_CUSTOMISE
 	select VIDEOBUF_DVB
 	---help---
 	  This adds support for DVB cards based on the
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 54859233f31..099d5df8c57 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -268,6 +268,20 @@ static struct em28xx_reg_seq dikom_dk300_digital[] = {
 };
 
 
+/* Reset for the most [digital] boards */
+static struct em28xx_reg_seq leadership_digital[] = {
+	{EM2874_R80_GPIO,	0x70,	0xff,	10},
+	{	-1,		-1,	-1,	-1},
+};
+
+static struct em28xx_reg_seq leadership_reset[] = {
+	{EM2874_R80_GPIO,	0xf0,	0xff,	10},
+	{EM2874_R80_GPIO,	0xb0,	0xff,	10},
+	{EM2874_R80_GPIO,	0xf0,	0xff,	10},
+	{	-1,		-1,	-1,	-1},
+};
+
+
 /*
  *  Board definitions
  */
@@ -1224,6 +1238,19 @@ struct em28xx_board em28xx_boards[] = {
 			.vmux     = SAA7115_COMPOSITE0,
 		} },
 	},
+
+	[EM2874_LEADERSHIP_ISDBT] = {
+		.i2c_speed      = EM2874_I2C_SECONDARY_BUS_SELECT |
+				  EM28XX_I2C_CLK_WAIT_ENABLE |
+				  EM28XX_I2C_FREQ_100_KHZ,
+		.xclk		= EM28XX_XCLK_FREQUENCY_10MHZ,
+		.name		= "EM2874 Leadership ISDBT",
+		.tuner_type	= TUNER_ABSENT,
+		.tuner_gpio     = leadership_reset,
+		.dvb_gpio       = leadership_digital,
+		.has_dvb	= 1,
+	},
+
 	[EM2880_BOARD_MSI_DIGIVOX_AD] = {
 		.name         = "MSI DigiVox A/D",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
@@ -1469,7 +1496,7 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 	[EM2882_BOARD_TERRATEC_HYBRID_XS] = {
-		.name         = "Terratec Hybrid XS (em2882)",
+		.name         = "Terratec Cinnergy Hybrid T USB XS (em2882)",
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.mts_firmware = 1,
@@ -1633,11 +1660,11 @@ struct em28xx_board em28xx_boards[] = {
 		.input           = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = SAA7115_COMPOSITE0,
-			.amux     = EM28XX_AMUX_VIDEO2,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = SAA7115_SVIDEO3,
-			.amux     = EM28XX_AMUX_VIDEO2,
+			.amux     = EM28XX_AMUX_LINE_IN,
 		} },
 	},
 	[EM2860_BOARD_TERRATEC_AV350] = {
@@ -1754,6 +1781,8 @@ struct usb_device_id em28xx_id_table[] = {
 			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0x2868),
 			.driver_info = EM2820_BOARD_UNKNOWN },
+	{ USB_DEVICE(0xeb1a, 0x2875),
+			.driver_info = EM2820_BOARD_UNKNOWN },
 	{ USB_DEVICE(0xeb1a, 0xe300),
 			.driver_info = EM2861_BOARD_KWORLD_PVRTV_300U },
 	{ USB_DEVICE(0xeb1a, 0xe303),
@@ -1791,7 +1820,7 @@ struct usb_device_id em28xx_id_table[] = {
 	{ USB_DEVICE(0x0ccd, 0x005e),
 			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
 	{ USB_DEVICE(0x0ccd, 0x0042),
-			.driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
+			.driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS },
 	{ USB_DEVICE(0x0ccd, 0x0043),
 			.driver_info = EM2870_BOARD_TERRATEC_XS },
 	{ USB_DEVICE(0x0ccd, 0x0047),
@@ -1873,6 +1902,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
 	{0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT},
 	{0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC},
 	{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
+	{0x6b800080, EM2874_LEADERSHIP_ISDBT, TUNER_ABSENT},
 };
 
 /* I2C possible address to saa7115, tvp5150, msp3400, tvaudio */
@@ -2408,7 +2438,7 @@ void em28xx_register_i2c_ir(struct em28xx *dev)
 		dev->init_data.get_key = em28xx_get_key_em_haup;
 		dev->init_data.name = "i2c IR (EM2840 Hauppauge)";
 	case EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE:
-		dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;;
+		dev->init_data.ir_codes = RC_MAP_WINFAST_USBII_DELUXE;
 		dev->init_data.get_key = em28xx_get_key_winfast_usbii_deluxe;
 		dev->init_data.name = "i2c IR (EM2820 Winfast TV USBII Deluxe)";
 		break;
@@ -2430,8 +2460,36 @@ void em28xx_card_setup(struct em28xx *dev)
 			dev->board.is_webcam = 0;
 		else
 			dev->progressive = 1;
-	} else
-		em28xx_set_model(dev);
+	}
+
+	if (!dev->board.is_webcam) {
+		switch (dev->model) {
+		case EM2820_BOARD_UNKNOWN:
+		case EM2800_BOARD_UNKNOWN:
+		/*
+		 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD.
+		 *
+		 * This occurs because they share identical USB vendor and
+		 * product IDs.
+		 *
+		 * What we do here is look up the EEPROM hash of the K-WORLD
+		 * and if it is found then we decide that we do not have
+		 * a DIGIVOX and reset the device to the K-WORLD instead.
+		 *
+		 * This solution is only valid if they do not share eeprom
+		 * hash identities which has not been determined as yet.
+		 */
+		if (em28xx_hint_board(dev) < 0)
+			em28xx_errdev("Board not discovered\n");
+		else {
+			em28xx_set_model(dev);
+			em28xx_pre_card_setup(dev);
+		}
+		break;
+		default:
+			em28xx_set_model(dev);
+		}
+	}
 
 	em28xx_info("Identified as %s (card=%d)\n",
 		    dev->board.name, dev->model);
@@ -2554,39 +2612,39 @@ void em28xx_card_setup(struct em28xx *dev)
 	/* request some modules */
 	if (dev->board.has_msp34xx)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			NULL, "msp3400", 0, msp3400_addrs);
+			"msp3400", 0, msp3400_addrs);
 
 	if (dev->board.decoder == EM28XX_SAA711X)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			NULL, "saa7115_auto", 0, saa711x_addrs);
+			"saa7115_auto", 0, saa711x_addrs);
 
 	if (dev->board.decoder == EM28XX_TVP5150)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			NULL, "tvp5150", 0, tvp5150_addrs);
+			"tvp5150", 0, tvp5150_addrs);
 
 	if (dev->em28xx_sensor == EM28XX_MT9V011) {
 		struct v4l2_subdev *sd;
 
 		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
-			 &dev->i2c_adap, NULL, "mt9v011", 0, mt9v011_addrs);
+			 &dev->i2c_adap, "mt9v011", 0, mt9v011_addrs);
 		v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
 	}
 
 
 	if (dev->board.adecoder == EM28XX_TVAUDIO)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			NULL, "tvaudio", dev->board.tvaudio_addr, NULL);
+			"tvaudio", dev->board.tvaudio_addr, NULL);
 
 	if (dev->board.tuner_type != TUNER_ABSENT) {
 		int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
 
 		if (dev->board.radio.type)
 			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				NULL, "tuner", dev->board.radio_addr, NULL);
+				"tuner", dev->board.radio_addr, NULL);
 
 		if (has_demod)
 			v4l2_i2c_new_subdev(&dev->v4l2_dev,
-				&dev->i2c_adap, NULL, "tuner",
+				&dev->i2c_adap, "tuner",
 				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		if (dev->tuner_addr == 0) {
 			enum v4l2_i2c_tuner_type type =
@@ -2594,14 +2652,14 @@ void em28xx_card_setup(struct em28xx *dev)
 			struct v4l2_subdev *sd;
 
 			sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
-				&dev->i2c_adap, NULL, "tuner",
+				&dev->i2c_adap, "tuner",
 				0, v4l2_i2c_tuner_addrs(type));
 
 			if (sd)
 				dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
 		} else {
 			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				NULL, "tuner", dev->tuner_addr, NULL);
+				"tuner", dev->tuner_addr, NULL);
 		}
 	}
 
@@ -2632,8 +2690,14 @@ static void request_modules(struct em28xx *dev)
 	INIT_WORK(&dev->request_module_wk, request_module_async);
 	schedule_work(&dev->request_module_wk);
 }
+
+static void flush_request_modules(struct em28xx *dev)
+{
+	flush_work_sync(&dev->request_module_wk);
+}
 #else
 #define request_modules(dev)
+#define flush_request_modules(dev)
 #endif /* CONFIG_MODULES */
 
 /*
@@ -2749,8 +2813,8 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 	em28xx_pre_card_setup(dev);
 
 	if (!dev->board.is_em2800) {
-		/* Sets I2C speed to 100 KHz */
-		retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40);
+		/* Resets I2C speed */
+		em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed);
 		if (retval < 0) {
 			em28xx_errdev("%s: em28xx_write_regs_req failed!"
 				      " retval [%d]\n",
@@ -3060,6 +3124,8 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
 
 	em28xx_info("disconnecting %s\n", dev->vdev->name);
 
+	flush_request_modules(dev);
+
 	/* wait until all current v4l2 io is finished then deallocate
 	   resources */
 	mutex_lock(&dev->lock);
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 3ac8d3025fe..c7c04bf712a 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -37,6 +37,7 @@
 #include "mt352_priv.h" /* FIXME */
 #include "tda1002x.h"
 #include "tda18271.h"
+#include "s921.h"
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -245,6 +246,10 @@ static struct lgdt3305_config em2870_lgdt3304_dev = {
 	.qam_if_khz         = 4000,
 };
 
+static struct s921_config sharp_isdbt = {
+	.demod_address = 0x30 >> 1
+};
+
 static struct zl10353_config em28xx_zl10353_with_xc3028 = {
 	.demod_address = (0x1e >> 1),
 	.no_tuner = 1,
@@ -481,6 +486,7 @@ static int dvb_init(struct em28xx *dev)
 
 	if (!dev->board.has_dvb) {
 		/* This device does not support the extension */
+		printk(KERN_INFO "em28xx_dvb: This device does not support the extension\n");
 		return 0;
 	}
 
@@ -496,6 +502,16 @@ static int dvb_init(struct em28xx *dev)
 	em28xx_set_mode(dev, EM28XX_DIGITAL_MODE);
 	/* init frontend */
 	switch (dev->model) {
+	case EM2874_LEADERSHIP_ISDBT:
+		dvb->frontend = dvb_attach(s921_attach,
+				&sharp_isdbt, &dev->i2c_adap);
+
+		if (!dvb->frontend) {
+			result = -EINVAL;
+			goto out_free;
+		}
+
+		break;
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850:
 	case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950:
 	case EM2880_BOARD_PINNACLE_PCTV_HD_PRO:
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 6759cd5570d..ba1ba8648c8 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/input.h>
 #include <linux/usb.h>
 #include <linux/slab.h>
 
@@ -64,7 +63,7 @@ struct em28xx_ir_poll_result {
 
 struct em28xx_IR {
 	struct em28xx *dev;
-	struct input_dev *input;
+	struct rc_dev *rc;
 	char name[32];
 	char phys[32];
 
@@ -75,10 +74,6 @@ struct em28xx_IR {
 	unsigned int last_readcount;
 
 	int  (*get_key)(struct em28xx_IR *, struct em28xx_ir_poll_result *);
-
-	/* IR device properties */
-
-	struct ir_dev_props props;
 };
 
 /**********************************************************
@@ -302,12 +297,12 @@ static void em28xx_ir_handle_key(struct em28xx_IR *ir)
 			poll_result.toggle_bit, poll_result.read_count,
 			poll_result.rc_address, poll_result.rc_data[0]);
 		if (ir->full_code)
-			ir_keydown(ir->input,
+			rc_keydown(ir->rc,
 				   poll_result.rc_address << 8 |
 				   poll_result.rc_data[0],
 				   poll_result.toggle_bit);
 		else
-			ir_keydown(ir->input,
+			rc_keydown(ir->rc,
 				   poll_result.rc_data[0],
 				   poll_result.toggle_bit);
 
@@ -331,9 +326,9 @@ static void em28xx_ir_work(struct work_struct *work)
 	schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
 }
 
-static int em28xx_ir_start(void *priv)
+static int em28xx_ir_start(struct rc_dev *rc)
 {
-	struct em28xx_IR *ir = priv;
+	struct em28xx_IR *ir = rc->priv;
 
 	INIT_DELAYED_WORK(&ir->work, em28xx_ir_work);
 	schedule_delayed_work(&ir->work, 0);
@@ -341,30 +336,30 @@ static int em28xx_ir_start(void *priv)
 	return 0;
 }
 
-static void em28xx_ir_stop(void *priv)
+static void em28xx_ir_stop(struct rc_dev *rc)
 {
-	struct em28xx_IR *ir = priv;
+	struct em28xx_IR *ir = rc->priv;
 
 	cancel_delayed_work_sync(&ir->work);
 }
 
-int em28xx_ir_change_protocol(void *priv, u64 ir_type)
+int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 rc_type)
 {
 	int rc = 0;
-	struct em28xx_IR *ir = priv;
+	struct em28xx_IR *ir = rc_dev->priv;
 	struct em28xx *dev = ir->dev;
 	u8 ir_config = EM2874_IR_RC5;
 
 	/* Adjust xclk based o IR table for RC5/NEC tables */
 
-	if (ir_type == IR_TYPE_RC5) {
+	if (rc_type == RC_TYPE_RC5) {
 		dev->board.xclk |= EM28XX_XCLK_IR_RC5_MODE;
 		ir->full_code = 1;
-	} else if (ir_type == IR_TYPE_NEC) {
+	} else if (rc_type == RC_TYPE_NEC) {
 		dev->board.xclk &= ~EM28XX_XCLK_IR_RC5_MODE;
 		ir_config = EM2874_IR_NEC;
 		ir->full_code = 1;
-	} else if (ir_type != IR_TYPE_UNKNOWN)
+	} else if (rc_type != RC_TYPE_UNKNOWN)
 		rc = -EINVAL;
 
 	em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, dev->board.xclk,
@@ -391,7 +386,7 @@ int em28xx_ir_change_protocol(void *priv, u64 ir_type)
 int em28xx_ir_init(struct em28xx *dev)
 {
 	struct em28xx_IR *ir;
-	struct input_dev *input_dev;
+	struct rc_dev *rc;
 	int err = -ENOMEM;
 
 	if (dev->board.ir_codes == NULL) {
@@ -400,28 +395,27 @@ int em28xx_ir_init(struct em28xx *dev)
 	}
 
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev)
+	rc = rc_allocate_device();
+	if (!ir || !rc)
 		goto err_out_free;
 
 	/* record handles to ourself */
 	ir->dev = dev;
 	dev->ir = ir;
-
-	ir->input = input_dev;
+	ir->rc = rc;
 
 	/*
 	 * em2874 supports more protocols. For now, let's just announce
 	 * the two protocols that were already tested
 	 */
-	ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
-	ir->props.priv = ir;
-	ir->props.change_protocol = em28xx_ir_change_protocol;
-	ir->props.open = em28xx_ir_start;
-	ir->props.close = em28xx_ir_stop;
+	rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
+	rc->priv = ir;
+	rc->change_protocol = em28xx_ir_change_protocol;
+	rc->open = em28xx_ir_start;
+	rc->close = em28xx_ir_stop;
 
 	/* By default, keep protocol field untouched */
-	err = em28xx_ir_change_protocol(ir, IR_TYPE_UNKNOWN);
+	err = em28xx_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
 	if (err)
 		goto err_out_free;
 
@@ -435,27 +429,27 @@ int em28xx_ir_init(struct em28xx *dev)
 	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
 	strlcat(ir->phys, "/input0", sizeof(ir->phys));
 
-	input_dev->name = ir->name;
-	input_dev->phys = ir->phys;
-	input_dev->id.bustype = BUS_USB;
-	input_dev->id.version = 1;
-	input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
-	input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
-
-	input_dev->dev.parent = &dev->udev->dev;
-
-
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	rc->input_id.bustype = BUS_USB;
+	rc->input_id.version = 1;
+	rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+	rc->dev.parent = &dev->udev->dev;
+	rc->map_name = dev->board.ir_codes;
+	rc->driver_name = MODULE_NAME;
 
 	/* all done */
-	err = ir_input_register(ir->input, dev->board.ir_codes,
-				&ir->props, MODULE_NAME);
+	err = rc_register_device(rc);
 	if (err)
 		goto err_out_stop;
 
 	return 0;
+
  err_out_stop:
 	dev->ir = NULL;
  err_out_free:
+	rc_free_device(rc);
 	kfree(ir);
 	return err;
 }
@@ -468,8 +462,8 @@ int em28xx_ir_fini(struct em28xx *dev)
 	if (!ir)
 		return 0;
 
-	em28xx_ir_stop(ir);
-	ir_input_unregister(ir->input);
+	em28xx_ir_stop(ir->rc);
+	rc_unregister_device(ir->rc);
 	kfree(ir);
 
 	/* done */
@@ -557,7 +551,7 @@ void em28xx_deregister_snapshot_button(struct em28xx *dev)
 {
 	if (dev->sbutton_input_dev != NULL) {
 		em28xx_info("Deregistering snapshot button\n");
-		cancel_rearming_delayed_work(&dev->sbutton_query_work);
+		cancel_delayed_work_sync(&dev->sbutton_query_work);
 		input_unregister_device(dev->sbutton_input_dev);
 		dev->sbutton_input_dev = NULL;
 	}
diff --git a/drivers/media/video/em28xx/em28xx-vbi.c b/drivers/media/video/em28xx/em28xx-vbi.c
index 7f1c4a2173b..2b4c9cba2d6 100644
--- a/drivers/media/video/em28xx/em28xx-vbi.c
+++ b/drivers/media/video/em28xx/em28xx-vbi.c
@@ -23,6 +23,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/hardirq.h>
 #include <linux/init.h>
 
 #include "em28xx.h"
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 908e3bc8830..f34d524ccb0 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1434,7 +1434,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 
 	/* It isn't an AC97 control. Sends it to the v4l2 dev interface */
 	if (rc == 1) {
-		v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_ctrl, ctrl);
+		rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0, core, s_ctrl, ctrl);
 
 		/*
 		 * In the case of non-AC97 volume controls, we still need
@@ -1708,11 +1708,15 @@ static int vidioc_streamoff(struct file *file, void *priv,
 			fh, type, fh->resources, dev->resources);
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		videobuf_streamoff(&fh->vb_vidq);
-		res_free(fh, EM28XX_RESOURCE_VIDEO);
+		if (res_check(fh, EM28XX_RESOURCE_VIDEO)) {
+			videobuf_streamoff(&fh->vb_vidq);
+			res_free(fh, EM28XX_RESOURCE_VIDEO);
+		}
 	} else if (fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
-		videobuf_streamoff(&fh->vb_vbiq);
-		res_free(fh, EM28XX_RESOURCE_VBI);
+		if (res_check(fh, EM28XX_RESOURCE_VBI)) {
+			videobuf_streamoff(&fh->vb_vbiq);
+			res_free(fh, EM28XX_RESOURCE_VBI);
+		}
 	}
 
 	return 0;
@@ -1934,19 +1938,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b)
 				      O_NONBLOCK);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct em28xx_fh  *fh = priv;
-
-	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
-	else
-		return videobuf_cgmbuf(&fh->vb_vbiq, mbuf, 8);
-}
-#endif
-
-
 /* ----------------------------------------------------------- */
 /* RADIO ESPECIFIC IOCTLS                                      */
 /* ----------------------------------------------------------- */
@@ -2359,9 +2350,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_s_register          = vidioc_s_register,
 	.vidioc_g_chip_ident        = vidioc_g_chip_ident,
 #endif
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf                = vidiocgmbuf,
-#endif
 };
 
 static const struct video_device em28xx_video_template = {
@@ -2377,7 +2365,7 @@ static const struct v4l2_file_operations radio_fops = {
 	.owner         = THIS_MODULE,
 	.open          = em28xx_v4l2_open,
 	.release       = em28xx_v4l2_close,
-	.ioctl	       = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops radio_ioctl_ops = {
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 6a75e6a4fc2..6f2795a3d4b 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -33,7 +33,7 @@
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-device.h>
 #include <media/ir-kbd-i2c.h>
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE)
 #include <media/videobuf-dvb.h>
 #endif
@@ -117,6 +117,8 @@
 #define EM2800_BOARD_VC211A			  74
 #define EM2882_BOARD_DIKOM_DK300		  75
 #define EM2870_BOARD_KWORLD_A340		  76
+#define EM2874_LEADERSHIP_ISDBT			  77
+
 
 /* Limits minimum and default number of buffers */
 #define EM28XX_MIN_BUF 4
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index a5cfc76b40b..a982750dcef 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -1610,6 +1610,7 @@ et61x251_vidioc_enuminput(struct et61x251_device* cam, void __user * arg)
 	memset(&i, 0, sizeof(i));
 	strcpy(i.name, "Camera");
 	i.type = V4L2_INPUT_TYPE_CAMERA;
+	i.capabilities = V4L2_IN_CAP_STD;
 
 	if (copy_to_user(arg, &i, sizeof(i)))
 		return -EFAULT;
@@ -2530,7 +2531,7 @@ static const struct v4l2_file_operations et61x251_fops = {
 	.owner = THIS_MODULE,
 	.open =    et61x251_open,
 	.release = et61x251_release,
-	.ioctl =   et61x251_ioctl,
+	.unlocked_ioctl =   et61x251_ioctl,
 	.read =    et61x251_read,
 	.poll =    et61x251_poll,
 	.mmap =    et61x251_mmap,
diff --git a/drivers/media/video/fsl-viu.c b/drivers/media/video/fsl-viu.c
index 9a075d83dd1..e4bba88254c 100644
--- a/drivers/media/video/fsl-viu.c
+++ b/drivers/media/video/fsl-viu.c
@@ -194,6 +194,8 @@ struct viu_dev {
 
 	/* decoder */
 	struct v4l2_subdev	*decoder;
+
+	v4l2_std_id		std;
 };
 
 struct viu_fh {
@@ -915,6 +917,8 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 	if (fh->type != i)
 		return -EINVAL;
 
+	viu_start_dma(fh->dev);
+
 	return videobuf_streamon(&fh->vb_vidq);
 }
 
@@ -927,20 +931,39 @@ static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i)
 	if (fh->type != i)
 		return -EINVAL;
 
+	viu_stop_dma(fh->dev);
+
 	return videobuf_streamoff(&fh->vb_vidq);
 }
 
 #define decoder_call(viu, o, f, args...) \
 	v4l2_subdev_call(viu->decoder, o, f, ##args)
 
+static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct viu_fh *fh = priv;
+
+	decoder_call(fh->dev, video, querystd, std_id);
+	return 0;
+}
+
 static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id)
 {
 	struct viu_fh *fh = priv;
 
+	fh->dev->std = *id;
 	decoder_call(fh->dev, core, s_std, *id);
 	return 0;
 }
 
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std_id)
+{
+	struct viu_fh *fh = priv;
+
+	*std_id = fh->dev->std;
+	return 0;
+}
+
 /* only one input in this driver */
 static int vidioc_enum_input(struct file *file, void *priv,
 					struct v4l2_input *inp)
@@ -1331,6 +1354,7 @@ static int viu_release(struct file *file)
 
 	viu_stop_dma(dev);
 	videobuf_stop(&fh->vb_vidq);
+	videobuf_mmap_free(&fh->vb_vidq);
 
 	kfree(fh);
 
@@ -1397,7 +1421,9 @@ static const struct v4l2_ioctl_ops viu_ioctl_ops = {
 	.vidioc_querybuf      = vidioc_querybuf,
 	.vidioc_qbuf          = vidioc_qbuf,
 	.vidioc_dqbuf         = vidioc_dqbuf,
+	.vidioc_g_std         = vidioc_g_std,
 	.vidioc_s_std         = vidioc_s_std,
+	.vidioc_querystd      = vidioc_querystd,
 	.vidioc_enum_input    = vidioc_enum_input,
 	.vidioc_g_input       = vidioc_g_input,
 	.vidioc_s_input       = vidioc_s_input,
@@ -1486,7 +1512,7 @@ static int __devinit viu_of_probe(struct platform_device *op,
 
 	ad = i2c_get_adapter(0);
 	viu_dev->decoder = v4l2_i2c_new_subdev(&viu_dev->v4l2_dev, ad,
-			NULL, "saa7113", VIU_VIDEO_DECODER_ADDR, NULL);
+			"saa7113", VIU_VIDEO_DECODER_ADDR, NULL);
 
 	viu_dev->vidq.timeout.function = viu_vid_timeout;
 	viu_dev->vidq.timeout.data     = (unsigned long)viu_dev;
diff --git a/drivers/media/video/gspca/cpia1.c b/drivers/media/video/gspca/cpia1.c
index 9b121681d13..c1ae05f4661 100644
--- a/drivers/media/video/gspca/cpia1.c
+++ b/drivers/media/video/gspca/cpia1.c
@@ -37,7 +37,7 @@ MODULE_LICENSE("GPL");
 /* constant value's */
 #define MAGIC_0		0x19
 #define MAGIC_1		0x68
-#define DATA_IN		0xC0
+#define DATA_IN		0xc0
 #define DATA_OUT	0x40
 #define VIDEOSIZE_QCIF	0	/* 176x144 */
 #define VIDEOSIZE_CIF	1	/* 352x288 */
@@ -660,9 +660,9 @@ static int do_command(struct gspca_dev *gspca_dev, u16 command,
 		if (sd->params.qx3.button) {
 			/* button pressed - unlock the latch */
 			do_command(gspca_dev, CPIA_COMMAND_WriteMCPort,
-				   3, 0xDF, 0xDF, 0);
+				   3, 0xdf, 0xdf, 0);
 			do_command(gspca_dev, CPIA_COMMAND_WriteMCPort,
-				   3, 0xFF, 0xFF, 0);
+				   3, 0xff, 0xff, 0);
 		}
 
 		/* test whether microscope is cradled */
@@ -829,7 +829,7 @@ static int goto_low_power(struct gspca_dev *gspca_dev)
 	if (ret)
 		return ret;
 
-	do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0);
+	ret = do_command(gspca_dev, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0);
 	if (ret)
 		return ret;
 
@@ -1110,12 +1110,12 @@ static int command_setlights(struct gspca_dev *gspca_dev)
 	p2 = (sd->params.qx3.toplight == 0) << 3;
 
 	ret = do_command(gspca_dev, CPIA_COMMAND_WriteVCReg,
-			 0x90, 0x8F, 0x50, 0);
+			 0x90, 0x8f, 0x50, 0);
 	if (ret)
 		return ret;
 
 	return do_command(gspca_dev, CPIA_COMMAND_WriteMCPort, 2, 0,
-			  p1 | p2 | 0xE0, 0);
+			  p1 | p2 | 0xe0, 0);
 }
 
 static int set_flicker(struct gspca_dev *gspca_dev, int on, int apply)
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 8fe8fb486d6..442970073e8 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -55,7 +55,7 @@ MODULE_AUTHOR("Jean-François Moine <http://moinejf.free.fr>");
 MODULE_DESCRIPTION("GSPCA USB Camera Driver");
 MODULE_LICENSE("GPL");
 
-#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 10, 0)
+#define DRIVER_VERSION_NUMBER	KERNEL_VERSION(2, 11, 0)
 
 #ifdef GSPCA_DEBUG
 int gspca_debug = D_ERR | D_PROBE;
@@ -224,12 +224,12 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev,
 		buffer, buffer_len,
 		int_irq, (void *)gspca_dev, interval);
 	urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-	gspca_dev->int_urb = urb;
 	ret = usb_submit_urb(urb, GFP_KERNEL);
 	if (ret < 0) {
 		PDEBUG(D_ERR, "submit int URB failed with error %i", ret);
 		goto error_submit;
 	}
+	gspca_dev->int_urb = urb;
 	return ret;
 
 error_submit:
@@ -318,14 +318,9 @@ static void fill_frame(struct gspca_dev *gspca_dev,
 	}
 	pkt_scan = gspca_dev->sd_desc->pkt_scan;
 	for (i = 0; i < urb->number_of_packets; i++) {
+		len = urb->iso_frame_desc[i].actual_length;
 
 		/* check the packet status and length */
-		len = urb->iso_frame_desc[i].actual_length;
-		if (len == 0) {
-			if (gspca_dev->empty_packet == 0)
-				gspca_dev->empty_packet = 1;
-			continue;
-		}
 		st = urb->iso_frame_desc[i].status;
 		if (st) {
 			err("ISOC data error: [%d] len=%d, status=%d",
@@ -333,6 +328,11 @@ static void fill_frame(struct gspca_dev *gspca_dev,
 			gspca_dev->last_packet_type = DISCARD_PACKET;
 			continue;
 		}
+		if (len == 0) {
+			if (gspca_dev->empty_packet == 0)
+				gspca_dev->empty_packet = 1;
+			continue;
+		}
 
 		/* let the packet be analyzed by the subdriver */
 		PDEBUG(D_PACK, "packet [%d] o:%d l:%d",
@@ -652,16 +652,12 @@ static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev)
 				   : USB_ENDPOINT_XFER_ISOC;
 	i = gspca_dev->alt;			/* previous alt setting */
 	if (gspca_dev->cam.reverse_alts) {
-		if (gspca_dev->audio && i < gspca_dev->nbalt - 2)
-			i++;
 		while (++i < gspca_dev->nbalt) {
 			ep = alt_xfer(&intf->altsetting[i], xfer);
 			if (ep)
 				break;
 		}
 	} else {
-		if (gspca_dev->audio && i > 1)
-			i--;
 		while (--i >= 0) {
 			ep = alt_xfer(&intf->altsetting[i], xfer);
 			if (ep)
@@ -676,13 +672,11 @@ static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev)
 			i, ep->desc.bEndpointAddress);
 	gspca_dev->alt = i;		/* memorize the current alt setting */
 	if (gspca_dev->nbalt > 1) {
-		gspca_input_destroy_urb(gspca_dev);
 		ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i);
 		if (ret < 0) {
 			err("set alt %d err %d", i, ret);
 			ep = NULL;
 		}
-		gspca_input_create_urb(gspca_dev);
 	}
 	return ep;
 }
@@ -759,7 +753,7 @@ static int create_urbs(struct gspca_dev *gspca_dev,
 			}
 		} else {		/* bulk */
 			urb->pipe = usb_rcvbulkpipe(gspca_dev->dev,
-						ep->desc.bEndpointAddress),
+						ep->desc.bEndpointAddress);
 			urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
 			urb->complete = bulk_irq;
 		}
@@ -781,7 +775,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 
 	if (!gspca_dev->present) {
 		ret = -ENODEV;
-		goto out;
+		goto unlock;
 	}
 
 	/* reset the streaming variables */
@@ -802,8 +796,10 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 	if (gspca_dev->sd_desc->isoc_init) {
 		ret = gspca_dev->sd_desc->isoc_init(gspca_dev);
 		if (ret < 0)
-			goto out;
+			goto unlock;
 	}
+
+	gspca_input_destroy_urb(gspca_dev);
 	ep = get_ep(gspca_dev);
 	if (ep == NULL) {
 		ret = -EIO;
@@ -873,6 +869,8 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
 		}
 	}
 out:
+	gspca_input_create_urb(gspca_dev);
+unlock:
 	mutex_unlock(&gspca_dev->usb_lock);
 	return ret;
 }
@@ -1299,17 +1297,19 @@ static int vidioc_querycap(struct file *file, void  *priv,
 		ret = -ENODEV;
 		goto out;
 	}
-	strncpy(cap->driver, gspca_dev->sd_desc->name, sizeof cap->driver);
+	strncpy((char *) cap->driver, gspca_dev->sd_desc->name,
+			sizeof cap->driver);
 	if (gspca_dev->dev->product != NULL) {
-		strncpy(cap->card, gspca_dev->dev->product,
+		strncpy((char *) cap->card, gspca_dev->dev->product,
 			sizeof cap->card);
 	} else {
-		snprintf(cap->card, sizeof cap->card,
+		snprintf((char *) cap->card, sizeof cap->card,
 			"USB Camera (%04x:%04x)",
 			le16_to_cpu(gspca_dev->dev->descriptor.idVendor),
 			le16_to_cpu(gspca_dev->dev->descriptor.idProduct));
 	}
-	usb_make_path(gspca_dev->dev, cap->bus_info, sizeof(cap->bus_info));
+	usb_make_path(gspca_dev->dev, (char *) cap->bus_info,
+			sizeof(cap->bus_info));
 	cap->version = DRIVER_VERSION_NUMBER;
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
 			  | V4L2_CAP_STREAMING
@@ -1710,12 +1710,13 @@ static int vidioc_g_parm(struct file *filp, void *priv,
 
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 			return -ERESTARTSYS;
-		gspca_dev->usb_err = 0;
-		if (gspca_dev->present)
-			ret = gspca_dev->sd_desc->get_streamparm(gspca_dev,
-								 parm);
-		else
+		if (gspca_dev->present) {
+			gspca_dev->usb_err = 0;
+			gspca_dev->sd_desc->get_streamparm(gspca_dev, parm);
+			ret = gspca_dev->usb_err;
+		} else {
 			ret = -ENODEV;
+		}
 		mutex_unlock(&gspca_dev->usb_lock);
 		return ret;
 	}
@@ -1740,12 +1741,13 @@ static int vidioc_s_parm(struct file *filp, void *priv,
 
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 			return -ERESTARTSYS;
-		gspca_dev->usb_err = 0;
-		if (gspca_dev->present)
-			ret = gspca_dev->sd_desc->set_streamparm(gspca_dev,
-								 parm);
-		else
+		if (gspca_dev->present) {
+			gspca_dev->usb_err = 0;
+			gspca_dev->sd_desc->set_streamparm(gspca_dev, parm);
+			ret = gspca_dev->usb_err;
+		} else {
 			ret = -ENODEV;
+		}
 		mutex_unlock(&gspca_dev->usb_lock);
 		return ret;
 	}
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index d4d210b56b4..97b77a26a2e 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -62,7 +62,7 @@ struct gspca_ctrl {
 /* device information - set at probe time */
 struct cam {
 	const struct v4l2_pix_format *cam_mode;	/* size nmodes */
-	const struct framerates *mode_framerates; /* must have size nmode,
+	const struct framerates *mode_framerates; /* must have size nmodes,
 						   * just like cam_mode */
 	struct gspca_ctrl *ctrls;	/* control table - size nctrls */
 					/* may be NULL */
@@ -93,7 +93,7 @@ typedef int (*cam_reg_op) (struct gspca_dev *,
 				struct v4l2_dbg_register *);
 typedef int (*cam_ident_op) (struct gspca_dev *,
 				struct v4l2_dbg_chip_ident *);
-typedef int (*cam_streamparm_op) (struct gspca_dev *,
+typedef void (*cam_streamparm_op) (struct gspca_dev *,
 				  struct v4l2_streamparm *);
 typedef int (*cam_qmnu_op) (struct gspca_dev *,
 			struct v4l2_querymenu *);
diff --git a/drivers/media/video/gspca/m5602/m5602_ov9650.c b/drivers/media/video/gspca/m5602/m5602_ov9650.c
index 8ded8b10057..703d48670a2 100644
--- a/drivers/media/video/gspca/m5602/m5602_ov9650.c
+++ b/drivers/media/video/gspca/m5602/m5602_ov9650.c
@@ -624,7 +624,7 @@ static int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val)
 
 	/* Mask away all uninteresting bits */
 	i2c_data = ((val & 0x0300) >> 2) |
-			(i2c_data & 0x3F);
+			(i2c_data & 0x3f);
 	err = m5602_write_sensor(sd, OV9650_VREF, &i2c_data, 1);
 	if (err < 0)
 		return err;
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 6cf6855aa50..e1c3b9328ac 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -75,14 +75,14 @@ struct sd {
 
 	struct gspca_ctrl ctrls[NCTRL];
 
-	__u8 packet_nr;
+	u8 packet_nr;
 
 	char bridge;
 #define BRIDGE_OV511		0
 #define BRIDGE_OV511PLUS	1
 #define BRIDGE_OV518		2
 #define BRIDGE_OV518PLUS	3
-#define BRIDGE_OV519		4
+#define BRIDGE_OV519		4		/* = ov530 */
 #define BRIDGE_OVFX2		5
 #define BRIDGE_W9968CF		6
 #define BRIDGE_MASK		7
@@ -94,42 +94,44 @@ struct sd {
 	char snapshot_needs_reset;
 
 	/* Determined by sensor type */
-	__u8 sif;
+	u8 sif;
 
-	__u8 quality;
+	u8 quality;
 #define QUALITY_MIN 50
 #define QUALITY_MAX 70
 #define QUALITY_DEF 50
 
-	__u8 stopped;		/* Streaming is temporarily paused */
-	__u8 first_frame;
-
-	__u8 frame_rate;	/* current Framerate */
-	__u8 clockdiv;		/* clockdiv override */
-
-	char sensor;		/* Type of image sensor chip (SEN_*) */
-#define SEN_UNKNOWN 0
-#define SEN_OV2610 1
-#define SEN_OV3610 2
-#define SEN_OV6620 3
-#define SEN_OV6630 4
-#define SEN_OV66308AF 5
-#define SEN_OV7610 6
-#define SEN_OV7620 7
-#define SEN_OV7620AE 8
-#define SEN_OV7640 9
-#define SEN_OV7648 10
-#define SEN_OV7670 11
-#define SEN_OV76BE 12
-#define SEN_OV8610 13
+	u8 stopped;		/* Streaming is temporarily paused */
+	u8 first_frame;
+
+	u8 frame_rate;		/* current Framerate */
+	u8 clockdiv;		/* clockdiv override */
+
+	s8 sensor;		/* Type of image sensor chip (SEN_*) */
 
 	u8 sensor_addr;
-	int sensor_width;
-	int sensor_height;
-	int sensor_reg_cache[256];
+	u16 sensor_width;
+	u16 sensor_height;
+	s16 sensor_reg_cache[256];
 
 	u8 jpeg_hdr[JPEG_HDR_SZ];
 };
+enum sensors {
+	SEN_OV2610,
+	SEN_OV3610,
+	SEN_OV6620,
+	SEN_OV6630,
+	SEN_OV66308AF,
+	SEN_OV7610,
+	SEN_OV7620,
+	SEN_OV7620AE,
+	SEN_OV7640,
+	SEN_OV7648,
+	SEN_OV7660,
+	SEN_OV7670,
+	SEN_OV76BE,
+	SEN_OV8610,
+};
 
 /* Note this is a bit of a hack, but the w9968cf driver needs the code for all
    the ov sensors which is already present here. When we have the time we
@@ -182,7 +184,7 @@ static const struct ctrl sd_ctrls[] = {
 	    },
 	    .set_control = setcolors,
 	},
-/* The flip controls work with ov7670 only */
+/* The flip controls work for sensors ov7660 and ov7670 only */
 [HFLIP] = {
 	    {
 		.id      = V4L2_CID_HFLIP,
@@ -225,7 +227,7 @@ static const struct ctrl sd_ctrls[] = {
 		.type    = V4L2_CTRL_TYPE_MENU,
 		.name    = "Light frequency filter",
 		.minimum = 0,
-		.maximum = 2,	/* 0: 0, 1: 50Hz, 2:60Hz */
+		.maximum = 2,	/* 0: no flicker, 1: 50Hz, 2:60Hz, 3: auto */
 		.step    = 1,
 		.default_value = 0,
 	    },
@@ -233,6 +235,53 @@ static const struct ctrl sd_ctrls[] = {
 	},
 };
 
+/* table of the disabled controls */
+static const unsigned ctrl_dis[] = {
+[SEN_OV2610] =		(1 << NCTRL) - 1,	/* no control */
+
+[SEN_OV3610] =		(1 << NCTRL) - 1,	/* no control */
+
+[SEN_OV6620] =		(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV6630] =		(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV66308AF] =	(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV7610] =		(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV7620] =		(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV7620AE] =	(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV7640] =		(1 << HFLIP) |
+			(1 << VFLIP) |
+			(1 << AUTOBRIGHT) |
+			(1 << CONTRAST),
+
+[SEN_OV7648] =		(1 << HFLIP) |
+			(1 << VFLIP) |
+			(1 << AUTOBRIGHT) |
+			(1 << CONTRAST),
+
+[SEN_OV7660] =		(1 << AUTOBRIGHT),
+
+[SEN_OV7670] =		(1 << COLORS) |
+			(1 << AUTOBRIGHT),
+
+[SEN_OV76BE] =		(1 << HFLIP) |
+			(1 << VFLIP),
+
+[SEN_OV8610] =		(1 << HFLIP) |
+			(1 << VFLIP) |
+			(1 << FREQ),
+};
+
 static const struct v4l2_pix_format ov519_vga_mode[] = {
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
@@ -412,7 +461,6 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 		.priv = 0},
 };
 
-
 /* Registers common to OV511 / OV518 */
 #define R51x_FIFO_PSIZE			0x30	/* 2 bytes wide w/ OV518(+) */
 #define R51x_SYS_RESET			0x50
@@ -420,7 +468,7 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 	#define	OV511_RESET_OMNICE	0x08
 #define R51x_SYS_INIT			0x53
 #define R51x_SYS_SNAP			0x52
-#define R51x_SYS_CUST_ID		0x5F
+#define R51x_SYS_CUST_ID		0x5f
 #define R51x_COMP_LUT_BEGIN		0x80
 
 /* OV511 Camera interface register numbers */
@@ -435,13 +483,13 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 #define R511_CAM_OPTS			0x18
 
 #define R511_SNAP_FRAME			0x19
-#define R511_SNAP_PXCNT			0x1A
-#define R511_SNAP_LNCNT			0x1B
-#define R511_SNAP_PXDIV			0x1C
-#define R511_SNAP_LNDIV			0x1D
-#define R511_SNAP_UV_EN			0x1E
-#define R511_SNAP_UV_EN			0x1E
-#define R511_SNAP_OPTS			0x1F
+#define R511_SNAP_PXCNT			0x1a
+#define R511_SNAP_LNCNT			0x1b
+#define R511_SNAP_PXDIV			0x1c
+#define R511_SNAP_LNDIV			0x1d
+#define R511_SNAP_UV_EN			0x1e
+#define R511_SNAP_UV_EN			0x1e
+#define R511_SNAP_OPTS			0x1f
 
 #define R511_DRAM_FLOW_CTL		0x20
 #define R511_FIFO_OPTS			0x31
@@ -466,13 +514,14 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 #define OV519_R25_FORMAT		0x25
 
 /* OV519 System Controller register numbers */
-#define OV519_SYS_RESET1 0x51
-#define OV519_SYS_EN_CLK1 0x54
+#define OV519_R51_RESET1		0x51
+#define OV519_R54_EN_CLK1		0x54
+#define OV519_R57_SNAPSHOT		0x57
 
 #define OV519_GPIO_DATA_OUT0		0x71
 #define OV519_GPIO_IO_CTRL0		0x72
 
-#define OV511_ENDPOINT_ADDRESS  1	/* Isoc endpoint number */
+/*#define OV511_ENDPOINT_ADDRESS 1	 * Isoc endpoint number */
 
 /*
  * The FX2 chip does not give us a zero length read at end of frame.
@@ -526,80 +575,81 @@ static const struct v4l2_pix_format ovfx2_ov3610_mode[] = {
 #define OV7610_REG_ID_LOW	0x1d	/* manufacturer ID LSB */
 #define OV7610_REG_COM_I	0x29	/* misc settings */
 
-/* OV7670 registers */
-#define OV7670_REG_GAIN        0x00    /* Gain lower 8 bits (rest in vref) */
-#define OV7670_REG_BLUE        0x01    /* blue gain */
-#define OV7670_REG_RED         0x02    /* red gain */
-#define OV7670_REG_VREF        0x03    /* Pieces of GAIN, VSTART, VSTOP */
-#define OV7670_REG_COM1        0x04    /* Control 1 */
-#define OV7670_REG_AECHH       0x07    /* AEC MS 5 bits */
-#define OV7670_REG_COM3        0x0c    /* Control 3 */
-#define OV7670_REG_COM4        0x0d    /* Control 4 */
-#define OV7670_REG_COM5        0x0e    /* All "reserved" */
-#define OV7670_REG_COM6        0x0f    /* Control 6 */
-#define OV7670_REG_AECH        0x10    /* More bits of AEC value */
-#define OV7670_REG_CLKRC       0x11    /* Clock control */
-#define OV7670_REG_COM7        0x12    /* Control 7 */
-#define   OV7670_COM7_FMT_VGA    0x00
-#define   OV7670_COM7_YUV        0x00    /* YUV */
-#define   OV7670_COM7_FMT_QVGA   0x10    /* QVGA format */
-#define   OV7670_COM7_FMT_MASK   0x38
-#define   OV7670_COM7_RESET      0x80    /* Register reset */
-#define OV7670_REG_COM8        0x13    /* Control 8 */
-#define   OV7670_COM8_AEC        0x01    /* Auto exposure enable */
-#define   OV7670_COM8_AWB        0x02    /* White balance enable */
-#define   OV7670_COM8_AGC        0x04    /* Auto gain enable */
-#define   OV7670_COM8_BFILT      0x20    /* Band filter enable */
-#define   OV7670_COM8_AECSTEP    0x40    /* Unlimited AEC step size */
-#define   OV7670_COM8_FASTAEC    0x80    /* Enable fast AGC/AEC */
-#define OV7670_REG_COM9        0x14    /* Control 9  - gain ceiling */
-#define OV7670_REG_COM10       0x15    /* Control 10 */
-#define OV7670_REG_HSTART      0x17    /* Horiz start high bits */
-#define OV7670_REG_HSTOP       0x18    /* Horiz stop high bits */
-#define OV7670_REG_VSTART      0x19    /* Vert start high bits */
-#define OV7670_REG_VSTOP       0x1a    /* Vert stop high bits */
-#define OV7670_REG_MVFP        0x1e    /* Mirror / vflip */
-#define   OV7670_MVFP_VFLIP	 0x10    /* vertical flip */
-#define   OV7670_MVFP_MIRROR     0x20    /* Mirror image */
-#define OV7670_REG_AEW         0x24    /* AGC upper limit */
-#define OV7670_REG_AEB         0x25    /* AGC lower limit */
-#define OV7670_REG_VPT         0x26    /* AGC/AEC fast mode op region */
-#define OV7670_REG_HREF        0x32    /* HREF pieces */
-#define OV7670_REG_TSLB        0x3a    /* lots of stuff */
-#define OV7670_REG_COM11       0x3b    /* Control 11 */
-#define   OV7670_COM11_EXP       0x02
-#define   OV7670_COM11_HZAUTO    0x10    /* Auto detect 50/60 Hz */
-#define OV7670_REG_COM12       0x3c    /* Control 12 */
-#define OV7670_REG_COM13       0x3d    /* Control 13 */
-#define   OV7670_COM13_GAMMA     0x80    /* Gamma enable */
-#define   OV7670_COM13_UVSAT     0x40    /* UV saturation auto adjustment */
-#define OV7670_REG_COM14       0x3e    /* Control 14 */
-#define OV7670_REG_EDGE        0x3f    /* Edge enhancement factor */
-#define OV7670_REG_COM15       0x40    /* Control 15 */
-#define   OV7670_COM15_R00FF     0xc0    /*            00 to FF */
-#define OV7670_REG_COM16       0x41    /* Control 16 */
-#define   OV7670_COM16_AWBGAIN   0x08    /* AWB gain enable */
-#define OV7670_REG_BRIGHT      0x55    /* Brightness */
-#define OV7670_REG_CONTRAS     0x56    /* Contrast control */
-#define OV7670_REG_GFIX        0x69    /* Fix gain control */
-#define OV7670_REG_RGB444      0x8c    /* RGB 444 control */
-#define OV7670_REG_HAECC1      0x9f    /* Hist AEC/AGC control 1 */
-#define OV7670_REG_HAECC2      0xa0    /* Hist AEC/AGC control 2 */
-#define OV7670_REG_BD50MAX     0xa5    /* 50hz banding step limit */
-#define OV7670_REG_HAECC3      0xa6    /* Hist AEC/AGC control 3 */
-#define OV7670_REG_HAECC4      0xa7    /* Hist AEC/AGC control 4 */
-#define OV7670_REG_HAECC5      0xa8    /* Hist AEC/AGC control 5 */
-#define OV7670_REG_HAECC6      0xa9    /* Hist AEC/AGC control 6 */
-#define OV7670_REG_HAECC7      0xaa    /* Hist AEC/AGC control 7 */
-#define OV7670_REG_BD60MAX     0xab    /* 60hz banding step limit */
+/* OV7660 and OV7670 registers */
+#define OV7670_R00_GAIN		0x00	/* Gain lower 8 bits (rest in vref) */
+#define OV7670_R01_BLUE		0x01	/* blue gain */
+#define OV7670_R02_RED		0x02	/* red gain */
+#define OV7670_R03_VREF		0x03	/* Pieces of GAIN, VSTART, VSTOP */
+#define OV7670_R04_COM1		0x04	/* Control 1 */
+/*#define OV7670_R07_AECHH	0x07	 * AEC MS 5 bits */
+#define OV7670_R0C_COM3		0x0c	/* Control 3 */
+#define OV7670_R0D_COM4		0x0d	/* Control 4 */
+#define OV7670_R0E_COM5		0x0e	/* All "reserved" */
+#define OV7670_R0F_COM6		0x0f	/* Control 6 */
+#define OV7670_R10_AECH		0x10	/* More bits of AEC value */
+#define OV7670_R11_CLKRC	0x11	/* Clock control */
+#define OV7670_R12_COM7		0x12	/* Control 7 */
+#define   OV7670_COM7_FMT_VGA	 0x00
+/*#define   OV7670_COM7_YUV	 0x00	 * YUV */
+#define   OV7670_COM7_FMT_QVGA	 0x10	/* QVGA format */
+#define   OV7670_COM7_FMT_MASK	 0x38
+#define   OV7670_COM7_RESET	 0x80	/* Register reset */
+#define OV7670_R13_COM8		0x13	/* Control 8 */
+#define   OV7670_COM8_AEC	 0x01	/* Auto exposure enable */
+#define   OV7670_COM8_AWB	 0x02	/* White balance enable */
+#define   OV7670_COM8_AGC	 0x04	/* Auto gain enable */
+#define   OV7670_COM8_BFILT	 0x20	/* Band filter enable */
+#define   OV7670_COM8_AECSTEP	 0x40	/* Unlimited AEC step size */
+#define   OV7670_COM8_FASTAEC	 0x80	/* Enable fast AGC/AEC */
+#define OV7670_R14_COM9		0x14	/* Control 9 - gain ceiling */
+#define OV7670_R15_COM10	0x15	/* Control 10 */
+#define OV7670_R17_HSTART	0x17	/* Horiz start high bits */
+#define OV7670_R18_HSTOP	0x18	/* Horiz stop high bits */
+#define OV7670_R19_VSTART	0x19	/* Vert start high bits */
+#define OV7670_R1A_VSTOP	0x1a	/* Vert stop high bits */
+#define OV7670_R1E_MVFP		0x1e	/* Mirror / vflip */
+#define   OV7670_MVFP_VFLIP	 0x10	/* vertical flip */
+#define   OV7670_MVFP_MIRROR	 0x20	/* Mirror image */
+#define OV7670_R24_AEW		0x24	/* AGC upper limit */
+#define OV7670_R25_AEB		0x25	/* AGC lower limit */
+#define OV7670_R26_VPT		0x26	/* AGC/AEC fast mode op region */
+#define OV7670_R32_HREF		0x32	/* HREF pieces */
+#define OV7670_R3A_TSLB		0x3a	/* lots of stuff */
+#define OV7670_R3B_COM11	0x3b	/* Control 11 */
+#define   OV7670_COM11_EXP	 0x02
+#define   OV7670_COM11_HZAUTO	 0x10	/* Auto detect 50/60 Hz */
+#define OV7670_R3C_COM12	0x3c	/* Control 12 */
+#define OV7670_R3D_COM13	0x3d	/* Control 13 */
+#define   OV7670_COM13_GAMMA	 0x80	/* Gamma enable */
+#define   OV7670_COM13_UVSAT	 0x40	/* UV saturation auto adjustment */
+#define OV7670_R3E_COM14	0x3e	/* Control 14 */
+#define OV7670_R3F_EDGE		0x3f	/* Edge enhancement factor */
+#define OV7670_R40_COM15	0x40	/* Control 15 */
+/*#define   OV7670_COM15_R00FF	 0xc0	 *	00 to FF */
+#define OV7670_R41_COM16	0x41	/* Control 16 */
+#define   OV7670_COM16_AWBGAIN	 0x08	/* AWB gain enable */
+/* end of ov7660 common registers */
+#define OV7670_R55_BRIGHT	0x55	/* Brightness */
+#define OV7670_R56_CONTRAS	0x56	/* Contrast control */
+#define OV7670_R69_GFIX		0x69	/* Fix gain control */
+/*#define OV7670_R8C_RGB444	0x8c	 * RGB 444 control */
+#define OV7670_R9F_HAECC1	0x9f	/* Hist AEC/AGC control 1 */
+#define OV7670_RA0_HAECC2	0xa0	/* Hist AEC/AGC control 2 */
+#define OV7670_RA5_BD50MAX	0xa5	/* 50hz banding step limit */
+#define OV7670_RA6_HAECC3	0xa6	/* Hist AEC/AGC control 3 */
+#define OV7670_RA7_HAECC4	0xa7	/* Hist AEC/AGC control 4 */
+#define OV7670_RA8_HAECC5	0xa8	/* Hist AEC/AGC control 5 */
+#define OV7670_RA9_HAECC6	0xa9	/* Hist AEC/AGC control 6 */
+#define OV7670_RAA_HAECC7	0xaa	/* Hist AEC/AGC control 7 */
+#define OV7670_RAB_BD60MAX	0xab	/* 60hz banding step limit */
 
 struct ov_regvals {
-	__u8 reg;
-	__u8 val;
+	u8 reg;
+	u8 val;
 };
 struct ov_i2c_regvals {
-	__u8 reg;
-	__u8 val;
+	u8 reg;
+	u8 val;
 };
 
 /* Settings for OV2610 camera chip */
@@ -617,7 +667,6 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 * "wait 4096 external clock ... to make sure the sensor is
 	 * stable and ready to access registers" i.e. 160us at 24MHz
 	 */
-
 	{ 0x12, 0x80 }, /* COMH reset */
 	{ 0x12, 0x00 }, /* QXGA, master */
 
@@ -650,7 +699,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    COMI[0] "Exposure control"
 	 *                  =   0 (0x00) .......0 "Manual"
 	 */
-	{ 0x13, 0xC0 },
+	{ 0x13, 0xc0 },
 
 	/*
 	 * 09 COMC "Common Control C"
@@ -706,7 +755,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    COME[0] "Auto zero circuit select"
 	 *                  =   1 (0x01) .......1 "On"
 	 */
-	{ 0x0d, 0xA1 },
+	{ 0x0d, 0xa1 },
 
 	/*
 	 * 0E COMF "Common Control F"
@@ -770,7 +819,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    COMJ[0] "Reserved"
 	 *                  =   0 (0x00) .......0
 	 */
-	{ 0x14, 0xC6 },
+	{ 0x14, 0xc6 },
 
 	/*
 	 * 15 COMK "Common Control K"
@@ -876,7 +925,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    FVOPT[7:0] "Range"
 	 *                  =  31 (0x1F) 00011111
 	 */
-	{ 0x3c, 0x1F },
+	{ 0x3c, 0x1f },
 
 	/*
 	 * 44 Undocumented  =   0 (0x00) 00000000
@@ -925,7 +974,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    48[7:0] "It's a secret"
 	 *                  = 192 (0xC0) 11000000
 	 */
-	{ 0x48, 0xC0 },
+	{ 0x48, 0xc0 },
 
 	/*
 	 * 49 Undocumented  =  25 (0x19) 00011001
@@ -939,18 +988,18 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    4B[7:0] "It's a secret"
 	 *                  = 128 (0x80) 10000000
 	 */
-	{ 0x4B, 0x80 },
+	{ 0x4b, 0x80 },
 
 	/*
 	 * 4D Undocumented  = 196 (0xC4) 11000100
 	 *    4D[7:0] "It's a secret"
 	 *                  = 196 (0xC4) 11000100
 	 */
-	{ 0x4D, 0xC4 },
+	{ 0x4d, 0xc4 },
 
 	/*
 	 * 35 VREF "Reference Voltage Control"
-	 *                  =  76 (0x4C) 01001100
+	 *                  =  76 (0x4c) 01001100
 	 *    VREF[7:5] "Column high reference control"
 	 *                  =   2 (0x02) 010..... "higher voltage"
 	 *    VREF[4:2] "Column low reference control"
@@ -958,21 +1007,21 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    VREF[1:0] "Reserved"
 	 *                  =   0 (0x00) ......00
 	 */
-	{ 0x35, 0x4C },
+	{ 0x35, 0x4c },
 
 	/*
 	 * 3D Undocumented  =   0 (0x00) 00000000
 	 *    3D[7:0] "It's a secret"
 	 *                  =   0 (0x00) 00000000
 	 */
-	{ 0x3D, 0x00 },
+	{ 0x3d, 0x00 },
 
 	/*
 	 * 3E Undocumented  =   0 (0x00) 00000000
 	 *    3E[7:0] "It's a secret"
 	 *                  =   0 (0x00) 00000000
 	 */
-	{ 0x3E, 0x00 },
+	{ 0x3e, 0x00 },
 
 	/*
 	 * 3B FREFB "Internal Reference Adjustment"
@@ -1012,7 +1061,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    VBLM[3:0] "Sensor current control"
 	 *                  =  10 (0x0A) ....1010
 	 */
-	{ 0x34, 0x5A },
+	{ 0x34, 0x5a },
 
 	/*
 	 * 3B FREFB "Internal Reference Adjustment"
@@ -1078,7 +1127,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    HREFST[7:0] "Horizontal window start, 8 MSBs"
 	 *                  =  31 (0x1F) 00011111
 	 */
-	{ 0x17, 0x1F },
+	{ 0x17, 0x1f },
 
 	/*
 	 * 18 HREFEND "Horizontal window end"
@@ -1086,7 +1135,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    HREFEND[7:0] "Horizontal Window End, 8 MSBs"
 	 *                  =  95 (0x5F) 01011111
 	 */
-	{ 0x18, 0x5F },
+	{ 0x18, 0x5f },
 
 	/*
 	 * 19 VSTRT "Vertical window start"
@@ -1126,7 +1175,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    COMA[1:0] "Vertical window start line control 2 LSBs"
 	 *                  =   2 (0x02) ......10
 	 */
-	{ 0x03, 0x4A },
+	{ 0x03, 0x4a },
 
 	/*
 	 * 11 CLKRC "Clock Rate Control"
@@ -1183,7 +1232,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    HREFST[7:0] "Horizontal window start, 8 MSBs"
 	 *                  =  31 (0x1F) 00011111
 	 */
-	{ 0x17, 0x1F },
+	{ 0x17, 0x1f },
 
 	/*
 	 * 18 HREFEND "Horizontal window end"
@@ -1191,7 +1240,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    HREFEND[7:0] "Horizontal Window End, 8 MSBs"
 	 *                  =  95 (0x5F) 01011111
 	 */
-	{ 0x18, 0x5F },
+	{ 0x18, 0x5f },
 
 	/*
 	 * 19 VSTRT "Vertical window start"
@@ -1231,7 +1280,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    COMA[1:0] "Vertical window start line control 2 LSBs"
 	 *                  =   2 (0x02) ......10
 	 */
-	{ 0x03, 0x4A },
+	{ 0x03, 0x4a },
 
 	/*
 	 * 02 RED "Red Gain Control"
@@ -1241,7 +1290,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    RED[6:0] "Value"
 	 *                  =  47 (0x2F) .0101111
 	 */
-	{ 0x02, 0xAF },
+	{ 0x02, 0xaf },
 
 	/*
 	 * 2D ADDVSL "VSYNC Pulse Width"
@@ -1249,7 +1298,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    ADDVSL[7:0] "VSYNC pulse width, LSB"
 	 *                  = 210 (0xD2) 11010010
 	 */
-	{ 0x2d, 0xD2 },
+	{ 0x2d, 0xd2 },
 
 	/*
 	 * 00 GAIN          =  24 (0x18) 00011000
@@ -1272,7 +1321,7 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    BLUE[6:0] "Value"
 	 *                  = 112 (0x70) .1110000
 	 */
-	{ 0x01, 0xF0 },
+	{ 0x01, 0xf0 },
 
 	/*
 	 * 10 AEC "Automatic Exposure Control"
@@ -1280,14 +1329,14 @@ static const struct ov_i2c_regvals norm_3620b[] = {
 	 *    AEC[7:0] "Automatic Exposure Control, 8 MSBs"
 	 *                  =  10 (0x0A) 00001010
 	 */
-	{ 0x10, 0x0A },
-
-	{ 0xE1, 0x67 },
-	{ 0xE3, 0x03 },
-	{ 0xE4, 0x26 },
-	{ 0xE5, 0x3E },
-	{ 0xF8, 0x01 },
-	{ 0xFF, 0x01 },
+	{ 0x10, 0x0a },
+
+	{ 0xe1, 0x67 },
+	{ 0xe3, 0x03 },
+	{ 0xe4, 0x26 },
+	{ 0xe5, 0x3e },
+	{ 0xf8, 0x01 },
+	{ 0xff, 0x01 },
 };
 
 static const struct ov_i2c_regvals norm_6x20[] = {
@@ -1296,7 +1345,7 @@ static const struct ov_i2c_regvals norm_6x20[] = {
 	{ 0x03, 0x60 },
 	{ 0x05, 0x7f }, /* For when autoadjust is off */
 	{ 0x07, 0xa8 },
-	/* The ratio of 0x0c and 0x0d  controls the white point */
+	/* The ratio of 0x0c and 0x0d controls the white point */
 	{ 0x0c, 0x24 },
 	{ 0x0d, 0x24 },
 	{ 0x0f, 0x15 }, /* COMS */
@@ -1464,7 +1513,7 @@ static const struct ov_i2c_regvals norm_7620[] = {
 	{ 0x00, 0x00 },		/* gain */
 	{ 0x01, 0x80 },		/* blue gain */
 	{ 0x02, 0x80 },		/* red gain */
-	{ 0x03, 0xc0 },		/* OV7670_REG_VREF */
+	{ 0x03, 0xc0 },		/* OV7670_R03_VREF */
 	{ 0x06, 0x60 },
 	{ 0x07, 0x00 },
 	{ 0x0c, 0x24 },
@@ -1532,33 +1581,177 @@ static const struct ov_i2c_regvals norm_7640[] = {
 	{ 0x12, 0x14 },
 };
 
+static const struct ov_regvals init_519_ov7660[] = {
+	{ 0x5d,	0x03 }, /* Turn off suspend mode */
+	{ 0x53,	0x9b }, /* 0x9f enables the (unused) microcontroller */
+	{ 0x54,	0x0f }, /* bit2 (jpeg enable) */
+	{ 0xa2,	0x20 }, /* a2-a5 are undocumented */
+	{ 0xa3,	0x18 },
+	{ 0xa4,	0x04 },
+	{ 0xa5,	0x28 },
+	{ 0x37,	0x00 },	/* SetUsbInit */
+	{ 0x55,	0x02 }, /* 4.096 Mhz audio clock */
+	/* Enable both fields, YUV Input, disable defect comp (why?) */
+	{ 0x20,	0x0c },	/* 0x0d does U <-> V swap */
+	{ 0x21,	0x38 },
+	{ 0x22,	0x1d },
+	{ 0x17,	0x50 }, /* undocumented */
+	{ 0x37,	0x00 }, /* undocumented */
+	{ 0x40,	0xff }, /* I2C timeout counter */
+	{ 0x46,	0x00 }, /* I2C clock prescaler */
+};
+static const struct ov_i2c_regvals norm_7660[] = {
+	{OV7670_R12_COM7, OV7670_COM7_RESET},
+	{OV7670_R11_CLKRC, 0x81},
+	{0x92, 0x00},			/* DM_LNL */
+	{0x93, 0x00},			/* DM_LNH */
+	{0x9d, 0x4c},			/* BD50ST */
+	{0x9e, 0x3f},			/* BD60ST */
+	{OV7670_R3B_COM11, 0x02},
+	{OV7670_R13_COM8, 0xf5},
+	{OV7670_R10_AECH, 0x00},
+	{OV7670_R00_GAIN, 0x00},
+	{OV7670_R01_BLUE, 0x7c},
+	{OV7670_R02_RED, 0x9d},
+	{OV7670_R12_COM7, 0x00},
+	{OV7670_R04_COM1, 00},
+	{OV7670_R18_HSTOP, 0x01},
+	{OV7670_R17_HSTART, 0x13},
+	{OV7670_R32_HREF, 0x92},
+	{OV7670_R19_VSTART, 0x02},
+	{OV7670_R1A_VSTOP, 0x7a},
+	{OV7670_R03_VREF, 0x00},
+	{OV7670_R0E_COM5, 0x04},
+	{OV7670_R0F_COM6, 0x62},
+	{OV7670_R15_COM10, 0x00},
+	{0x16, 0x02},			/* RSVD */
+	{0x1b, 0x00},			/* PSHFT */
+	{OV7670_R1E_MVFP, 0x01},
+	{0x29, 0x3c},			/* RSVD */
+	{0x33, 0x00},			/* CHLF */
+	{0x34, 0x07},			/* ARBLM */
+	{0x35, 0x84},			/* RSVD */
+	{0x36, 0x00},			/* RSVD */
+	{0x37, 0x04},			/* ADC */
+	{0x39, 0x43},			/* OFON */
+	{OV7670_R3A_TSLB, 0x00},
+	{OV7670_R3C_COM12, 0x6c},
+	{OV7670_R3D_COM13, 0x98},
+	{OV7670_R3F_EDGE, 0x23},
+	{OV7670_R40_COM15, 0xc1},
+	{OV7670_R41_COM16, 0x22},
+	{0x6b, 0x0a},			/* DBLV */
+	{0xa1, 0x08},			/* RSVD */
+	{0x69, 0x80},			/* HV */
+	{0x43, 0xf0},			/* RSVD.. */
+	{0x44, 0x10},
+	{0x45, 0x78},
+	{0x46, 0xa8},
+	{0x47, 0x60},
+	{0x48, 0x80},
+	{0x59, 0xba},
+	{0x5a, 0x9a},
+	{0x5b, 0x22},
+	{0x5c, 0xb9},
+	{0x5d, 0x9b},
+	{0x5e, 0x10},
+	{0x5f, 0xe0},
+	{0x60, 0x85},
+	{0x61, 0x60},
+	{0x9f, 0x9d},			/* RSVD */
+	{0xa0, 0xa0},			/* DSPC2 */
+	{0x4f, 0x60},			/* matrix */
+	{0x50, 0x64},
+	{0x51, 0x04},
+	{0x52, 0x18},
+	{0x53, 0x3c},
+	{0x54, 0x54},
+	{0x55, 0x40},
+	{0x56, 0x40},
+	{0x57, 0x40},
+	{0x58, 0x0d},			/* matrix sign */
+	{0x8b, 0xcc},			/* RSVD */
+	{0x8c, 0xcc},
+	{0x8d, 0xcf},
+	{0x6c, 0x40},			/* gamma curve */
+	{0x6d, 0xe0},
+	{0x6e, 0xa0},
+	{0x6f, 0x80},
+	{0x70, 0x70},
+	{0x71, 0x80},
+	{0x72, 0x60},
+	{0x73, 0x60},
+	{0x74, 0x50},
+	{0x75, 0x40},
+	{0x76, 0x38},
+	{0x77, 0x3c},
+	{0x78, 0x32},
+	{0x79, 0x1a},
+	{0x7a, 0x28},
+	{0x7b, 0x24},
+	{0x7c, 0x04},			/* gamma curve */
+	{0x7d, 0x12},
+	{0x7e, 0x26},
+	{0x7f, 0x46},
+	{0x80, 0x54},
+	{0x81, 0x64},
+	{0x82, 0x70},
+	{0x83, 0x7c},
+	{0x84, 0x86},
+	{0x85, 0x8e},
+	{0x86, 0x9c},
+	{0x87, 0xab},
+	{0x88, 0xc4},
+	{0x89, 0xd1},
+	{0x8a, 0xe5},
+	{OV7670_R14_COM9, 0x1e},
+	{OV7670_R24_AEW, 0x80},
+	{OV7670_R25_AEB, 0x72},
+	{OV7670_R26_VPT, 0xb3},
+	{0x62, 0x80},			/* LCC1 */
+	{0x63, 0x80},			/* LCC2 */
+	{0x64, 0x06},			/* LCC3 */
+	{0x65, 0x00},			/* LCC4 */
+	{0x66, 0x01},			/* LCC5 */
+	{0x94, 0x0e},			/* RSVD.. */
+	{0x95, 0x14},
+	{OV7670_R13_COM8, OV7670_COM8_FASTAEC
+			| OV7670_COM8_AECSTEP
+			| OV7670_COM8_BFILT
+			| 0x10
+			| OV7670_COM8_AGC
+			| OV7670_COM8_AWB
+			| OV7670_COM8_AEC},
+	{0xa1, 0xc8}
+};
+
 /* 7670. Defaults taken from OmniVision provided data,
 *  as provided by Jonathan Corbet of OLPC		*/
 static const struct ov_i2c_regvals norm_7670[] = {
-	{ OV7670_REG_COM7, OV7670_COM7_RESET },
-	{ OV7670_REG_TSLB, 0x04 },		/* OV */
-	{ OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
-	{ OV7670_REG_CLKRC, 0x01 },
+	{ OV7670_R12_COM7, OV7670_COM7_RESET },
+	{ OV7670_R3A_TSLB, 0x04 },		/* OV */
+	{ OV7670_R12_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
+	{ OV7670_R11_CLKRC, 0x01 },
 /*
  * Set the hardware window.  These values from OV don't entirely
  * make sense - hstop is less than hstart.  But they work...
  */
-	{ OV7670_REG_HSTART, 0x13 },
-	{ OV7670_REG_HSTOP, 0x01 },
-	{ OV7670_REG_HREF, 0xb6 },
-	{ OV7670_REG_VSTART, 0x02 },
-	{ OV7670_REG_VSTOP, 0x7a },
-	{ OV7670_REG_VREF, 0x0a },
-
-	{ OV7670_REG_COM3, 0x00 },
-	{ OV7670_REG_COM14, 0x00 },
+	{ OV7670_R17_HSTART, 0x13 },
+	{ OV7670_R18_HSTOP, 0x01 },
+	{ OV7670_R32_HREF, 0xb6 },
+	{ OV7670_R19_VSTART, 0x02 },
+	{ OV7670_R1A_VSTOP, 0x7a },
+	{ OV7670_R03_VREF, 0x0a },
+
+	{ OV7670_R0C_COM3, 0x00 },
+	{ OV7670_R3E_COM14, 0x00 },
 /* Mystery scaling numbers */
 	{ 0x70, 0x3a },
 	{ 0x71, 0x35 },
 	{ 0x72, 0x11 },
 	{ 0x73, 0xf0 },
 	{ 0xa2, 0x02 },
-/*	{ OV7670_REG_COM10, 0x0 }, */
+/*	{ OV7670_R15_COM10, 0x0 }, */
 
 /* Gamma curve values */
 	{ 0x7a, 0x20 },
@@ -1580,37 +1773,37 @@ static const struct ov_i2c_regvals norm_7670[] = {
 
 /* AGC and AEC parameters.  Note we start by disabling those features,
    then turn them only after tweaking the values. */
-	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+	{ OV7670_R13_COM8, OV7670_COM8_FASTAEC
 			 | OV7670_COM8_AECSTEP
 			 | OV7670_COM8_BFILT },
-	{ OV7670_REG_GAIN, 0x00 },
-	{ OV7670_REG_AECH, 0x00 },
-	{ OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
-	{ OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
-	{ OV7670_REG_BD50MAX, 0x05 },
-	{ OV7670_REG_BD60MAX, 0x07 },
-	{ OV7670_REG_AEW, 0x95 },
-	{ OV7670_REG_AEB, 0x33 },
-	{ OV7670_REG_VPT, 0xe3 },
-	{ OV7670_REG_HAECC1, 0x78 },
-	{ OV7670_REG_HAECC2, 0x68 },
+	{ OV7670_R00_GAIN, 0x00 },
+	{ OV7670_R10_AECH, 0x00 },
+	{ OV7670_R0D_COM4, 0x40 }, /* magic reserved bit */
+	{ OV7670_R14_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
+	{ OV7670_RA5_BD50MAX, 0x05 },
+	{ OV7670_RAB_BD60MAX, 0x07 },
+	{ OV7670_R24_AEW, 0x95 },
+	{ OV7670_R25_AEB, 0x33 },
+	{ OV7670_R26_VPT, 0xe3 },
+	{ OV7670_R9F_HAECC1, 0x78 },
+	{ OV7670_RA0_HAECC2, 0x68 },
 	{ 0xa1, 0x03 }, /* magic */
-	{ OV7670_REG_HAECC3, 0xd8 },
-	{ OV7670_REG_HAECC4, 0xd8 },
-	{ OV7670_REG_HAECC5, 0xf0 },
-	{ OV7670_REG_HAECC6, 0x90 },
-	{ OV7670_REG_HAECC7, 0x94 },
-	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+	{ OV7670_RA6_HAECC3, 0xd8 },
+	{ OV7670_RA7_HAECC4, 0xd8 },
+	{ OV7670_RA8_HAECC5, 0xf0 },
+	{ OV7670_RA9_HAECC6, 0x90 },
+	{ OV7670_RAA_HAECC7, 0x94 },
+	{ OV7670_R13_COM8, OV7670_COM8_FASTAEC
 			| OV7670_COM8_AECSTEP
 			| OV7670_COM8_BFILT
 			| OV7670_COM8_AGC
 			| OV7670_COM8_AEC },
 
 /* Almost all of these are magic "reserved" values.  */
-	{ OV7670_REG_COM5, 0x61 },
-	{ OV7670_REG_COM6, 0x4b },
+	{ OV7670_R0E_COM5, 0x61 },
+	{ OV7670_R0F_COM6, 0x4b },
 	{ 0x16, 0x02 },
-	{ OV7670_REG_MVFP, 0x07 },
+	{ OV7670_R1E_MVFP, 0x07 },
 	{ 0x21, 0x02 },
 	{ 0x22, 0x91 },
 	{ 0x29, 0x07 },
@@ -1619,10 +1812,10 @@ static const struct ov_i2c_regvals norm_7670[] = {
 	{ 0x37, 0x1d },
 	{ 0x38, 0x71 },
 	{ 0x39, 0x2a },
-	{ OV7670_REG_COM12, 0x78 },
+	{ OV7670_R3C_COM12, 0x78 },
 	{ 0x4d, 0x40 },
 	{ 0x4e, 0x20 },
-	{ OV7670_REG_GFIX, 0x00 },
+	{ OV7670_R69_GFIX, 0x00 },
 	{ 0x6b, 0x4a },
 	{ 0x74, 0x10 },
 	{ 0x8d, 0x4f },
@@ -1657,9 +1850,9 @@ static const struct ov_i2c_regvals norm_7670[] = {
 	{ 0x6f, 0x9f },
 					/* "9e for advance AWB" */
 	{ 0x6a, 0x40 },
-	{ OV7670_REG_BLUE, 0x40 },
-	{ OV7670_REG_RED, 0x60 },
-	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+	{ OV7670_R01_BLUE, 0x40 },
+	{ OV7670_R02_RED, 0x60 },
+	{ OV7670_R13_COM8, OV7670_COM8_FASTAEC
 			| OV7670_COM8_AECSTEP
 			| OV7670_COM8_BFILT
 			| OV7670_COM8_AGC
@@ -1675,22 +1868,22 @@ static const struct ov_i2c_regvals norm_7670[] = {
 	{ 0x54, 0x80 },
 	{ 0x58, 0x9e },
 
-	{ OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
-	{ OV7670_REG_EDGE, 0x00 },
+	{ OV7670_R41_COM16, OV7670_COM16_AWBGAIN },
+	{ OV7670_R3F_EDGE, 0x00 },
 	{ 0x75, 0x05 },
 	{ 0x76, 0xe1 },
 	{ 0x4c, 0x00 },
 	{ 0x77, 0x01 },
-	{ OV7670_REG_COM13, OV7670_COM13_GAMMA
+	{ OV7670_R3D_COM13, OV7670_COM13_GAMMA
 			  | OV7670_COM13_UVSAT
 			  | 2},		/* was 3 */
 	{ 0x4b, 0x09 },
 	{ 0xc9, 0x60 },
-	{ OV7670_REG_COM16, 0x38 },
+	{ OV7670_R41_COM16, 0x38 },
 	{ 0x56, 0x40 },
 
 	{ 0x34, 0x11 },
-	{ OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
+	{ OV7670_R3B_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
 	{ 0xa4, 0x88 },
 	{ 0x96, 0x00 },
 	{ 0x97, 0x30 },
@@ -1825,10 +2018,13 @@ static unsigned char ov7670_abs_to_sm(unsigned char v)
 }
 
 /* Write a OV519 register */
-static int reg_w(struct sd *sd, __u16 index, __u16 value)
+static void reg_w(struct sd *sd, u16 index, u16 value)
 {
 	int ret, req = 0;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return;
+
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
@@ -1838,6 +2034,8 @@ static int reg_w(struct sd *sd, __u16 index, __u16 value)
 		req = 0x0a;
 		/* fall through */
 	case BRIDGE_W9968CF:
+		PDEBUG(D_USBO, "SET %02x %04x %04x",
+				req, value, index);
 		ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
 			req,
@@ -1848,6 +2046,8 @@ static int reg_w(struct sd *sd, __u16 index, __u16 value)
 		req = 1;
 	}
 
+	PDEBUG(D_USBO, "SET %02x 0000 %04x %02x",
+			req, index, value);
 	sd->gspca_dev.usb_buf[0] = value;
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
@@ -1857,22 +2057,22 @@ static int reg_w(struct sd *sd, __u16 index, __u16 value)
 			sd->gspca_dev.usb_buf, 1, 500);
 leave:
 	if (ret < 0) {
-		err("Write reg 0x%04x -> [0x%02x] failed",
-		       value, index);
-		return ret;
+		err("reg_w %02x failed %d", index, ret);
+		sd->gspca_dev.usb_err = ret;
+		return;
 	}
-
-	PDEBUG(D_USBO, "Write reg 0x%04x -> [0x%02x]", value, index);
-	return 0;
 }
 
 /* Read from a OV519 register, note not valid for the w9968cf!! */
 /* returns: negative is error, pos or zero is data */
-static int reg_r(struct sd *sd, __u16 index)
+static int reg_r(struct sd *sd, u16 index)
 {
 	int ret;
 	int req;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return -1;
+
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
@@ -1893,29 +2093,37 @@ static int reg_r(struct sd *sd, __u16 index)
 
 	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
-		PDEBUG(D_USBI, "Read reg [0x%02X] -> 0x%04X", index, ret);
-	} else
-		err("Read reg [0x%02x] failed", index);
+		PDEBUG(D_USBI, "GET %02x 0000 %04x %02x",
+			req, index, ret);
+	} else {
+		err("reg_r %02x failed %d", index, ret);
+		sd->gspca_dev.usb_err = ret;
+	}
 
 	return ret;
 }
 
 /* Read 8 values from a OV519 register */
 static int reg_r8(struct sd *sd,
-		  __u16 index)
+		  u16 index)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return -1;
+
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
 			1,			/* REQ_IO */
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0, index, sd->gspca_dev.usb_buf, 8, 500);
 
-	if (ret >= 0)
+	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
-	else
-		err("Read reg 8 [0x%02x] failed", index);
+	} else {
+		err("reg_r8 %02x failed %d", index, ret);
+		sd->gspca_dev.usb_err = ret;
+	}
 
 	return ret;
 }
@@ -1926,34 +2134,37 @@ static int reg_r8(struct sd *sd,
  * that are in the same position as 0's in "mask" are preserved, regardless
  * of their respective state in "value".
  */
-static int reg_w_mask(struct sd *sd,
-			__u16 index,
-			__u8 value,
-			__u8 mask)
+static void reg_w_mask(struct sd *sd,
+			u16 index,
+			u8 value,
+			u8 mask)
 {
 	int ret;
-	__u8 oldval;
+	u8 oldval;
 
 	if (mask != 0xff) {
 		value &= mask;			/* Enforce mask on value */
 		ret = reg_r(sd, index);
 		if (ret < 0)
-			return ret;
+			return;
 
 		oldval = ret & ~mask;		/* Clear the masked bits */
 		value |= oldval;		/* Set the desired bits */
 	}
-	return reg_w(sd, index, value);
+	reg_w(sd, index, value);
 }
 
 /*
  * Writes multiple (n) byte value to a single register. Only valid with certain
  * registers (0x30 and 0xc4 - 0xce).
  */
-static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n)
+static void ov518_reg_w32(struct sd *sd, u16 index, u32 value, int n)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return;
+
 	*((__le32 *) sd->gspca_dev.usb_buf) = __cpu_to_le32(value);
 
 	ret = usb_control_msg(sd->gspca_dev.dev,
@@ -1963,69 +2174,55 @@ static int ov518_reg_w32(struct sd *sd, __u16 index, u32 value, int n)
 			0, index,
 			sd->gspca_dev.usb_buf, n, 500);
 	if (ret < 0) {
-		err("Write reg32 [%02x] %08x failed", index, value);
-		return ret;
+		err("reg_w32 %02x failed %d", index, ret);
+		sd->gspca_dev.usb_err = ret;
 	}
-
-	return 0;
 }
 
-static int ov511_i2c_w(struct sd *sd, __u8 reg, __u8 value)
+static void ov511_i2c_w(struct sd *sd, u8 reg, u8 value)
 {
 	int rc, retries;
 
-	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+	PDEBUG(D_USBO, "ov511_i2c_w %02x %02x", reg, value);
 
 	/* Three byte write cycle */
 	for (retries = 6; ; ) {
 		/* Select camera register */
-		rc = reg_w(sd, R51x_I2C_SADDR_3, reg);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R51x_I2C_SADDR_3, reg);
 
 		/* Write "value" to I2C data port of OV511 */
-		rc = reg_w(sd, R51x_I2C_DATA, value);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R51x_I2C_DATA, value);
 
 		/* Initiate 3-byte write cycle */
-		rc = reg_w(sd, R511_I2C_CTL, 0x01);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R511_I2C_CTL, 0x01);
 
 		do {
 			rc = reg_r(sd, R511_I2C_CTL);
 		} while (rc > 0 && ((rc & 1) == 0)); /* Retry until idle */
 
 		if (rc < 0)
-			return rc;
+			return;
 
 		if ((rc & 2) == 0) /* Ack? */
 			break;
 		if (--retries < 0) {
 			PDEBUG(D_USBO, "i2c write retries exhausted");
-			return -1;
+			return;
 		}
 	}
-
-	return 0;
 }
 
-static int ov511_i2c_r(struct sd *sd, __u8 reg)
+static int ov511_i2c_r(struct sd *sd, u8 reg)
 {
 	int rc, value, retries;
 
 	/* Two byte write cycle */
 	for (retries = 6; ; ) {
 		/* Select camera register */
-		rc = reg_w(sd, R51x_I2C_SADDR_2, reg);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R51x_I2C_SADDR_2, reg);
 
 		/* Initiate 2-byte write cycle */
-		rc = reg_w(sd, R511_I2C_CTL, 0x03);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R511_I2C_CTL, 0x03);
 
 		do {
 			rc = reg_r(sd, R511_I2C_CTL);
@@ -2049,9 +2246,7 @@ static int ov511_i2c_r(struct sd *sd, __u8 reg)
 	/* Two byte read cycle */
 	for (retries = 6; ; ) {
 		/* Initiate 2-byte read cycle */
-		rc = reg_w(sd, R511_I2C_CTL, 0x05);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R511_I2C_CTL, 0x05);
 
 		do {
 			rc = reg_r(sd, R511_I2C_CTL);
@@ -2064,9 +2259,7 @@ static int ov511_i2c_r(struct sd *sd, __u8 reg)
 			break;
 
 		/* I2C abort */
-		rc = reg_w(sd, R511_I2C_CTL, 0x10);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, R511_I2C_CTL, 0x10);
 
 		if (--retries < 0) {
 			PDEBUG(D_USBI, "i2c read retries exhausted");
@@ -2076,12 +2269,10 @@ static int ov511_i2c_r(struct sd *sd, __u8 reg)
 
 	value = reg_r(sd, R51x_I2C_DATA);
 
-	PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
+	PDEBUG(D_USBI, "ov511_i2c_r %02x %02x", reg, value);
 
 	/* This is needed to make i2c_w() work */
-	rc = reg_w(sd, R511_I2C_CTL, 0x05);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R511_I2C_CTL, 0x05);
 
 	return value;
 }
@@ -2091,32 +2282,24 @@ static int ov511_i2c_r(struct sd *sd, __u8 reg)
  * This is normally only called from i2c_w(). Note that this function
  * always succeeds regardless of whether the sensor is present and working.
  */
-static int ov518_i2c_w(struct sd *sd,
-		__u8 reg,
-		__u8 value)
+static void ov518_i2c_w(struct sd *sd,
+		u8 reg,
+		u8 value)
 {
-	int rc;
-
-	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
+	PDEBUG(D_USBO, "ov518_i2c_w %02x %02x", reg, value);
 
 	/* Select camera register */
-	rc = reg_w(sd, R51x_I2C_SADDR_3, reg);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R51x_I2C_SADDR_3, reg);
 
 	/* Write "value" to I2C data port of OV511 */
-	rc = reg_w(sd, R51x_I2C_DATA, value);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R51x_I2C_DATA, value);
 
 	/* Initiate 3-byte write cycle */
-	rc = reg_w(sd, R518_I2C_CTL, 0x01);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R518_I2C_CTL, 0x01);
 
 	/* wait for write complete */
 	msleep(4);
-	return reg_r8(sd, R518_I2C_CTL);
+	reg_r8(sd, R518_I2C_CTL);
 }
 
 /*
@@ -2126,105 +2309,102 @@ static int ov518_i2c_w(struct sd *sd,
  * This is normally only called from i2c_r(). Note that this function
  * always succeeds regardless of whether the sensor is present and working.
  */
-static int ov518_i2c_r(struct sd *sd, __u8 reg)
+static int ov518_i2c_r(struct sd *sd, u8 reg)
 {
-	int rc, value;
+	int value;
 
 	/* Select camera register */
-	rc = reg_w(sd, R51x_I2C_SADDR_2, reg);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R51x_I2C_SADDR_2, reg);
 
 	/* Initiate 2-byte write cycle */
-	rc = reg_w(sd, R518_I2C_CTL, 0x03);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R518_I2C_CTL, 0x03);
 
 	/* Initiate 2-byte read cycle */
-	rc = reg_w(sd, R518_I2C_CTL, 0x05);
-	if (rc < 0)
-		return rc;
+	reg_w(sd, R518_I2C_CTL, 0x05);
 	value = reg_r(sd, R51x_I2C_DATA);
-	PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
+	PDEBUG(D_USBI, "ov518_i2c_r %02x %02x", reg, value);
 	return value;
 }
 
-static int ovfx2_i2c_w(struct sd *sd, __u8 reg, __u8 value)
+static void ovfx2_i2c_w(struct sd *sd, u8 reg, u8 value)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return;
+
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_sndctrlpipe(sd->gspca_dev.dev, 0),
 			0x02,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			(__u16)value, (__u16)reg, NULL, 0, 500);
+			(u16) value, (u16) reg, NULL, 0, 500);
 
 	if (ret < 0) {
-		err("i2c 0x%02x -> [0x%02x] failed", value, reg);
-		return ret;
+		err("ovfx2_i2c_w %02x failed %d", reg, ret);
+		sd->gspca_dev.usb_err = ret;
 	}
 
-	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
-	return 0;
+	PDEBUG(D_USBO, "ovfx2_i2c_w %02x %02x", reg, value);
 }
 
-static int ovfx2_i2c_r(struct sd *sd, __u8 reg)
+static int ovfx2_i2c_r(struct sd *sd, u8 reg)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return -1;
+
 	ret = usb_control_msg(sd->gspca_dev.dev,
 			usb_rcvctrlpipe(sd->gspca_dev.dev, 0),
 			0x03,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			0, (__u16)reg, sd->gspca_dev.usb_buf, 1, 500);
+			0, (u16) reg, sd->gspca_dev.usb_buf, 1, 500);
 
 	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0];
-		PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, ret);
-	} else
-		err("i2c read [0x%02x] failed", reg);
+		PDEBUG(D_USBI, "ovfx2_i2c_r %02x %02x", reg, ret);
+	} else {
+		err("ovfx2_i2c_r %02x failed %d", reg, ret);
+		sd->gspca_dev.usb_err = ret;
+	}
 
 	return ret;
 }
 
-static int i2c_w(struct sd *sd, __u8 reg, __u8 value)
+static void i2c_w(struct sd *sd, u8 reg, u8 value)
 {
-	int ret = -1;
-
 	if (sd->sensor_reg_cache[reg] == value)
-		return 0;
+		return;
 
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		ret = ov511_i2c_w(sd, reg, value);
+		ov511_i2c_w(sd, reg, value);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
 	case BRIDGE_OV519:
-		ret = ov518_i2c_w(sd, reg, value);
+		ov518_i2c_w(sd, reg, value);
 		break;
 	case BRIDGE_OVFX2:
-		ret = ovfx2_i2c_w(sd, reg, value);
+		ovfx2_i2c_w(sd, reg, value);
 		break;
 	case BRIDGE_W9968CF:
-		ret = w9968cf_i2c_w(sd, reg, value);
+		w9968cf_i2c_w(sd, reg, value);
 		break;
 	}
 
-	if (ret >= 0) {
+	if (sd->gspca_dev.usb_err >= 0) {
 		/* Up on sensor reset empty the register cache */
 		if (reg == 0x12 && (value & 0x80))
 			memset(sd->sensor_reg_cache, -1,
-			       sizeof(sd->sensor_reg_cache));
+				sizeof(sd->sensor_reg_cache));
 		else
 			sd->sensor_reg_cache[reg] = value;
 	}
-
-	return ret;
 }
 
-static int i2c_r(struct sd *sd, __u8 reg)
+static int i2c_r(struct sd *sd, u8 reg)
 {
 	int ret = -1;
 
@@ -2260,95 +2440,99 @@ static int i2c_r(struct sd *sd, __u8 reg)
  * that are in the same position as 0's in "mask" are preserved, regardless
  * of their respective state in "value".
  */
-static int i2c_w_mask(struct sd *sd,
-		   __u8 reg,
-		   __u8 value,
-		   __u8 mask)
+static void i2c_w_mask(struct sd *sd,
+			u8 reg,
+			u8 value,
+			u8 mask)
 {
 	int rc;
-	__u8 oldval;
+	u8 oldval;
 
 	value &= mask;			/* Enforce mask on value */
 	rc = i2c_r(sd, reg);
 	if (rc < 0)
-		return rc;
+		return;
 	oldval = rc & ~mask;		/* Clear the masked bits */
 	value |= oldval;		/* Set the desired bits */
-	return i2c_w(sd, reg, value);
+	i2c_w(sd, reg, value);
 }
 
 /* Temporarily stops OV511 from functioning. Must do this before changing
  * registers while the camera is streaming */
-static inline int ov51x_stop(struct sd *sd)
+static inline void ov51x_stop(struct sd *sd)
 {
 	PDEBUG(D_STREAM, "stopping");
 	sd->stopped = 1;
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		return reg_w(sd, R51x_SYS_RESET, 0x3d);
+		reg_w(sd, R51x_SYS_RESET, 0x3d);
+		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		return reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a);
+		reg_w_mask(sd, R51x_SYS_RESET, 0x3a, 0x3a);
+		break;
 	case BRIDGE_OV519:
-		return reg_w(sd, OV519_SYS_RESET1, 0x0f);
+		reg_w(sd, OV519_R51_RESET1, 0x0f);
+		reg_w(sd, OV519_R51_RESET1, 0x00);
+		reg_w(sd, 0x22, 0x00);		/* FRAR */
+		break;
 	case BRIDGE_OVFX2:
-		return reg_w_mask(sd, 0x0f, 0x00, 0x02);
+		reg_w_mask(sd, 0x0f, 0x00, 0x02);
+		break;
 	case BRIDGE_W9968CF:
-		return reg_w(sd, 0x3c, 0x0a05); /* stop USB transfer */
+		reg_w(sd, 0x3c, 0x0a05); /* stop USB transfer */
+		break;
 	}
-
-	return 0;
 }
 
 /* Restarts OV511 after ov511_stop() is called. Has no effect if it is not
  * actually stopped (for performance). */
-static inline int ov51x_restart(struct sd *sd)
+static inline void ov51x_restart(struct sd *sd)
 {
-	int rc;
-
 	PDEBUG(D_STREAM, "restarting");
 	if (!sd->stopped)
-		return 0;
+		return;
 	sd->stopped = 0;
 
 	/* Reinitialize the stream */
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		return reg_w(sd, R51x_SYS_RESET, 0x00);
+		reg_w(sd, R51x_SYS_RESET, 0x00);
+		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		rc = reg_w(sd, 0x2f, 0x80);
-		if (rc < 0)
-			return rc;
-		return reg_w(sd, R51x_SYS_RESET, 0x00);
+		reg_w(sd, 0x2f, 0x80);
+		reg_w(sd, R51x_SYS_RESET, 0x00);
+		break;
 	case BRIDGE_OV519:
-		return reg_w(sd, OV519_SYS_RESET1, 0x00);
+		reg_w(sd, OV519_R51_RESET1, 0x0f);
+		reg_w(sd, OV519_R51_RESET1, 0x00);
+		reg_w(sd, 0x22, 0x1d);		/* FRAR */
+		break;
 	case BRIDGE_OVFX2:
-		return reg_w_mask(sd, 0x0f, 0x02, 0x02);
+		reg_w_mask(sd, 0x0f, 0x02, 0x02);
+		break;
 	case BRIDGE_W9968CF:
-		return reg_w(sd, 0x3c, 0x8a05); /* USB FIFO enable */
+		reg_w(sd, 0x3c, 0x8a05); /* USB FIFO enable */
+		break;
 	}
-
-	return 0;
 }
 
-static int ov51x_set_slave_ids(struct sd *sd, __u8 slave);
+static void ov51x_set_slave_ids(struct sd *sd, u8 slave);
 
 /* This does an initial reset of an OmniVision sensor and ensures that I2C
  * is synchronized. Returns <0 on failure.
  */
-static int init_ov_sensor(struct sd *sd, __u8 slave)
+static int init_ov_sensor(struct sd *sd, u8 slave)
 {
 	int i;
 
-	if (ov51x_set_slave_ids(sd, slave) < 0)
-		return -EIO;
+	ov51x_set_slave_ids(sd, slave);
 
 	/* Reset the sensor */
-	if (i2c_w(sd, 0x12, 0x80) < 0)
-		return -EIO;
+	i2c_w(sd, 0x12, 0x80);
 
 	/* Wait for it to initialize */
 	msleep(150);
@@ -2361,15 +2545,16 @@ static int init_ov_sensor(struct sd *sd, __u8 slave)
 		}
 
 		/* Reset the sensor */
-		if (i2c_w(sd, 0x12, 0x80) < 0)
-			return -EIO;
+		i2c_w(sd, 0x12, 0x80);
+
 		/* Wait for it to initialize */
 		msleep(150);
+
 		/* Dummy read to sync I2C */
 		if (i2c_r(sd, 0x00) < 0)
-			return -EIO;
+			return -1;
 	}
-	return -EIO;
+	return -1;
 }
 
 /* Set the read and write slave IDs. The "slave" argument is the write slave,
@@ -2377,53 +2562,40 @@ static int init_ov_sensor(struct sd *sd, __u8 slave)
  * This should not be called from outside the i2c I/O functions.
  * Sets I2C read and write slave IDs. Returns <0 for error
  */
-static int ov51x_set_slave_ids(struct sd *sd,
-				__u8 slave)
+static void ov51x_set_slave_ids(struct sd *sd,
+				u8 slave)
 {
-	int rc;
-
 	switch (sd->bridge) {
 	case BRIDGE_OVFX2:
-		return reg_w(sd, OVFX2_I2C_ADDR, slave);
+		reg_w(sd, OVFX2_I2C_ADDR, slave);
+		return;
 	case BRIDGE_W9968CF:
 		sd->sensor_addr = slave;
-		return 0;
+		return;
 	}
 
-	rc = reg_w(sd, R51x_I2C_W_SID, slave);
-	if (rc < 0)
-		return rc;
-	return reg_w(sd, R51x_I2C_R_SID, slave + 1);
+	reg_w(sd, R51x_I2C_W_SID, slave);
+	reg_w(sd, R51x_I2C_R_SID, slave + 1);
 }
 
-static int write_regvals(struct sd *sd,
+static void write_regvals(struct sd *sd,
 			 const struct ov_regvals *regvals,
 			 int n)
 {
-	int rc;
-
 	while (--n >= 0) {
-		rc = reg_w(sd, regvals->reg, regvals->val);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, regvals->reg, regvals->val);
 		regvals++;
 	}
-	return 0;
 }
 
-static int write_i2c_regvals(struct sd *sd,
-			     const struct ov_i2c_regvals *regvals,
-			     int n)
+static void write_i2c_regvals(struct sd *sd,
+			const struct ov_i2c_regvals *regvals,
+			int n)
 {
-	int rc;
-
 	while (--n >= 0) {
-		rc = i2c_w(sd, regvals->reg, regvals->val);
-		if (rc < 0)
-			return rc;
+		i2c_w(sd, regvals->reg, regvals->val);
 		regvals++;
 	}
-	return 0;
 }
 
 /****************************************************************************
@@ -2433,13 +2605,13 @@ static int write_i2c_regvals(struct sd *sd,
  ***************************************************************************/
 
 /* This initializes the OV2x10 / OV3610 / OV3620 */
-static int ov_hires_configure(struct sd *sd)
+static void ov_hires_configure(struct sd *sd)
 {
 	int high, low;
 
 	if (sd->bridge != BRIDGE_OVFX2) {
 		err("error hires sensors only supported with ovfx2");
-		return -1;
+		return;
 	}
 
 	PDEBUG(D_PROBE, "starting ov hires configuration");
@@ -2455,20 +2627,15 @@ static int ov_hires_configure(struct sd *sd)
 		PDEBUG(D_PROBE, "Sensor is an OV3610");
 		sd->sensor = SEN_OV3610;
 	} else {
-		err("Error unknown sensor type: 0x%02x%02x",
-		       high, low);
-		return -1;
+		err("Error unknown sensor type: %02x%02x",
+			high, low);
 	}
-
-	/* Set sensor-specific vars */
-	return 0;
 }
 
-
 /* This initializes the OV8110, OV8610 sensor. The OV8110 uses
  * the same register settings as the OV8610, since they are very similar.
  */
-static int ov8xx0_configure(struct sd *sd)
+static void ov8xx0_configure(struct sd *sd)
 {
 	int rc;
 
@@ -2478,27 +2645,21 @@ static int ov8xx0_configure(struct sd *sd)
 	rc = i2c_r(sd, OV7610_REG_COM_I);
 	if (rc < 0) {
 		PDEBUG(D_ERR, "Error detecting sensor type");
-		return -1;
+		return;
 	}
-	if ((rc & 3) == 1) {
+	if ((rc & 3) == 1)
 		sd->sensor = SEN_OV8610;
-	} else {
+	else
 		err("Unknown image sensor version: %d", rc & 3);
-		return -1;
-	}
-
-	/* Set sensor-specific vars */
-	return 0;
 }
 
 /* This initializes the OV7610, OV7620, or OV76BE sensor. The OV76BE uses
  * the same register settings as the OV7610, since they are very similar.
  */
-static int ov7xx0_configure(struct sd *sd)
+static void ov7xx0_configure(struct sd *sd)
 {
 	int rc, high, low;
 
-
 	PDEBUG(D_PROBE, "starting OV7xx0 configuration");
 
 	/* Detect sensor (sub)type */
@@ -2508,15 +2669,15 @@ static int ov7xx0_configure(struct sd *sd)
 	 * it appears to be wrongly detected as a 7610 by default */
 	if (rc < 0) {
 		PDEBUG(D_ERR, "Error detecting sensor type");
-		return -1;
+		return;
 	}
 	if ((rc & 3) == 3) {
 		/* quick hack to make OV7670s work */
 		high = i2c_r(sd, 0x0a);
 		low = i2c_r(sd, 0x0b);
 		/* info("%x, %x", high, low); */
-		if (high == 0x76 && low == 0x73) {
-			PDEBUG(D_PROBE, "Sensor is an OV7670");
+		if (high == 0x76 && (low & 0xf0) == 0x70) {
+			PDEBUG(D_PROBE, "Sensor is an OV76%02x", low);
 			sd->sensor = SEN_OV7670;
 		} else {
 			PDEBUG(D_PROBE, "Sensor is an OV7610");
@@ -2536,19 +2697,19 @@ static int ov7xx0_configure(struct sd *sd)
 		high = i2c_r(sd, 0x0a);
 		if (high < 0) {
 			PDEBUG(D_ERR, "Error detecting camera chip PID");
-			return high;
+			return;
 		}
 		low = i2c_r(sd, 0x0b);
 		if (low < 0) {
 			PDEBUG(D_ERR, "Error detecting camera chip VER");
-			return low;
+			return;
 		}
 		if (high == 0x76) {
 			switch (low) {
 			case 0x30:
 				err("Sensor is an OV7630/OV7635");
 				err("7630 is not supported by this driver");
-				return -1;
+				return;
 			case 0x40:
 				PDEBUG(D_PROBE, "Sensor is an OV7645");
 				sd->sensor = SEN_OV7640; /* FIXME */
@@ -2561,9 +2722,14 @@ static int ov7xx0_configure(struct sd *sd)
 				PDEBUG(D_PROBE, "Sensor is an OV7648");
 				sd->sensor = SEN_OV7648;
 				break;
+			case 0x60:
+				PDEBUG(D_PROBE, "Sensor is a OV7660");
+				sd->sensor = SEN_OV7660;
+				sd->invert_led = 0;
+				break;
 			default:
 				PDEBUG(D_PROBE, "Unknown sensor: 0x76%x", low);
-				return -1;
+				return;
 			}
 		} else {
 			PDEBUG(D_PROBE, "Sensor is an OV7620");
@@ -2571,15 +2737,11 @@ static int ov7xx0_configure(struct sd *sd)
 		}
 	} else {
 		err("Unknown image sensor version: %d", rc & 3);
-		return -1;
 	}
-
-	/* Set sensor-specific vars */
-	return 0;
 }
 
 /* This initializes the OV6620, OV6630, OV6630AE, or OV6630AF sensor. */
-static int ov6xx0_configure(struct sd *sd)
+static void ov6xx0_configure(struct sd *sd)
 {
 	int rc;
 	PDEBUG(D_PROBE, "starting OV6xx0 configuration");
@@ -2588,7 +2750,7 @@ static int ov6xx0_configure(struct sd *sd)
 	rc = i2c_r(sd, OV7610_REG_COM_I);
 	if (rc < 0) {
 		PDEBUG(D_ERR, "Error detecting sensor type");
-		return -1;
+		return;
 	}
 
 	/* Ugh. The first two bits are the version bits, but
@@ -2619,13 +2781,11 @@ static int ov6xx0_configure(struct sd *sd)
 		break;
 	default:
 		err("FATAL: Unknown sensor version: 0x%02x", rc);
-		return -1;
+		return;
 	}
 
 	/* Set sensor-specific vars */
 	sd->sif = 1;
-
-	return 0;
 }
 
 /* Turns on or off the LED. Only has an effect with OV511+/OV518(+)/OV519 */
@@ -2637,14 +2797,14 @@ static void ov51x_led_control(struct sd *sd, int on)
 	switch (sd->bridge) {
 	/* OV511 has no LED control */
 	case BRIDGE_OV511PLUS:
-		reg_w(sd, R511_SYS_LED_CTL, on ? 1 : 0);
+		reg_w(sd, R511_SYS_LED_CTL, on);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		reg_w_mask(sd, R518_GPIO_OUT, on ? 0x02 : 0x00, 0x02);
+		reg_w_mask(sd, R518_GPIO_OUT, 0x02 * on, 0x02);
 		break;
 	case BRIDGE_OV519:
-		reg_w_mask(sd, OV519_GPIO_DATA_OUT0, !on, 1);	/* 0 / 1 */
+		reg_w_mask(sd, OV519_GPIO_DATA_OUT0, on, 1);
 		break;
 	}
 }
@@ -2679,7 +2839,7 @@ static void sd_reset_snapshot(struct gspca_dev *gspca_dev)
 	}
 }
 
-static int ov51x_upload_quan_tables(struct sd *sd)
+static void ov51x_upload_quan_tables(struct sd *sd)
 {
 	const unsigned char yQuanTable511[] = {
 		0, 1, 1, 2, 2, 3, 3, 4,
@@ -2710,7 +2870,6 @@ static int ov51x_upload_quan_tables(struct sd *sd)
 		6, 6, 6, 6, 7, 7, 7, 8,
 		7, 7, 6, 7, 7, 7, 8, 8
 	};
-
 	const unsigned char uvQuanTable518[] = {
 		6, 6, 6, 7, 7, 7, 7, 7,
 		6, 6, 6, 7, 7, 7, 7, 7,
@@ -2720,18 +2879,18 @@ static int ov51x_upload_quan_tables(struct sd *sd)
 
 	const unsigned char *pYTable, *pUVTable;
 	unsigned char val0, val1;
-	int i, size, rc, reg = R51x_COMP_LUT_BEGIN;
+	int i, size, reg = R51x_COMP_LUT_BEGIN;
 
 	PDEBUG(D_PROBE, "Uploading quantization tables");
 
 	if (sd->bridge == BRIDGE_OV511 || sd->bridge == BRIDGE_OV511PLUS) {
 		pYTable = yQuanTable511;
 		pUVTable = uvQuanTable511;
-		size  = 32;
+		size = 32;
 	} else {
 		pYTable = yQuanTable518;
 		pUVTable = uvQuanTable518;
-		size  = 16;
+		size = 16;
 	}
 
 	for (i = 0; i < size; i++) {
@@ -2740,30 +2899,23 @@ static int ov51x_upload_quan_tables(struct sd *sd)
 		val0 &= 0x0f;
 		val1 &= 0x0f;
 		val0 |= val1 << 4;
-		rc = reg_w(sd, reg, val0);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, reg, val0);
 
 		val0 = *pUVTable++;
 		val1 = *pUVTable++;
 		val0 &= 0x0f;
 		val1 &= 0x0f;
 		val0 |= val1 << 4;
-		rc = reg_w(sd, reg + size, val0);
-		if (rc < 0)
-			return rc;
+		reg_w(sd, reg + size, val0);
 
 		reg++;
 	}
-
-	return 0;
 }
 
 /* This initializes the OV511/OV511+ and the sensor */
-static int ov511_configure(struct gspca_dev *gspca_dev)
+static void ov511_configure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int rc;
 
 	/* For 511 and 511+ */
 	const struct ov_regvals init_511[] = {
@@ -2809,42 +2961,27 @@ static int ov511_configure(struct gspca_dev *gspca_dev)
 
 	PDEBUG(D_PROBE, "Device custom id %x", reg_r(sd, R51x_SYS_CUST_ID));
 
-	rc = write_regvals(sd, init_511, ARRAY_SIZE(init_511));
-	if (rc < 0)
-		return rc;
+	write_regvals(sd, init_511, ARRAY_SIZE(init_511));
 
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
-		rc = write_regvals(sd, norm_511, ARRAY_SIZE(norm_511));
-		if (rc < 0)
-			return rc;
+		write_regvals(sd, norm_511, ARRAY_SIZE(norm_511));
 		break;
 	case BRIDGE_OV511PLUS:
-		rc = write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p));
-		if (rc < 0)
-			return rc;
+		write_regvals(sd, norm_511_p, ARRAY_SIZE(norm_511_p));
 		break;
 	}
 
 	/* Init compression */
-	rc = write_regvals(sd, compress_511, ARRAY_SIZE(compress_511));
-	if (rc < 0)
-		return rc;
-
-	rc = ov51x_upload_quan_tables(sd);
-	if (rc < 0) {
-		PDEBUG(D_ERR, "Error uploading quantization tables");
-		return rc;
-	}
+	write_regvals(sd, compress_511, ARRAY_SIZE(compress_511));
 
-	return 0;
+	ov51x_upload_quan_tables(sd);
 }
 
 /* This initializes the OV518/OV518+ and the sensor */
-static int ov518_configure(struct gspca_dev *gspca_dev)
+static void ov518_configure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int rc;
 
 	/* For 518 and 518+ */
 	const struct ov_regvals init_518[] = {
@@ -2892,65 +3029,49 @@ static int ov518_configure(struct gspca_dev *gspca_dev)
 
 	/* First 5 bits of custom ID reg are a revision ID on OV518 */
 	PDEBUG(D_PROBE, "Device revision %d",
-	       0x1F & reg_r(sd, R51x_SYS_CUST_ID));
+		0x1f & reg_r(sd, R51x_SYS_CUST_ID));
 
-	rc = write_regvals(sd, init_518, ARRAY_SIZE(init_518));
-	if (rc < 0)
-		return rc;
+	write_regvals(sd, init_518, ARRAY_SIZE(init_518));
 
 	/* Set LED GPIO pin to output mode */
-	rc = reg_w_mask(sd, R518_GPIO_CTL, 0x00, 0x02);
-	if (rc < 0)
-		return rc;
+	reg_w_mask(sd, R518_GPIO_CTL, 0x00, 0x02);
 
 	switch (sd->bridge) {
 	case BRIDGE_OV518:
-		rc = write_regvals(sd, norm_518, ARRAY_SIZE(norm_518));
-		if (rc < 0)
-			return rc;
+		write_regvals(sd, norm_518, ARRAY_SIZE(norm_518));
 		break;
 	case BRIDGE_OV518PLUS:
-		rc = write_regvals(sd, norm_518_p, ARRAY_SIZE(norm_518_p));
-		if (rc < 0)
-			return rc;
+		write_regvals(sd, norm_518_p, ARRAY_SIZE(norm_518_p));
 		break;
 	}
 
-	rc = ov51x_upload_quan_tables(sd);
-	if (rc < 0) {
-		PDEBUG(D_ERR, "Error uploading quantization tables");
-		return rc;
-	}
+	ov51x_upload_quan_tables(sd);
 
-	rc = reg_w(sd, 0x2f, 0x80);
-	if (rc < 0)
-		return rc;
-
-	return 0;
+	reg_w(sd, 0x2f, 0x80);
 }
 
-static int ov519_configure(struct sd *sd)
+static void ov519_configure(struct sd *sd)
 {
 	static const struct ov_regvals init_519[] = {
-		{ 0x5a,  0x6d }, /* EnableSystem */
-		{ 0x53,  0x9b },
-		{ 0x54,  0xff }, /* set bit2 to enable jpeg */
-		{ 0x5d,  0x03 },
-		{ 0x49,  0x01 },
-		{ 0x48,  0x00 },
+		{ 0x5a, 0x6d }, /* EnableSystem */
+		{ 0x53, 0x9b },
+		{ OV519_R54_EN_CLK1, 0xff }, /* set bit2 to enable jpeg */
+		{ 0x5d, 0x03 },
+		{ 0x49, 0x01 },
+		{ 0x48, 0x00 },
 		/* Set LED pin to output mode. Bit 4 must be cleared or sensor
 		 * detection will fail. This deserves further investigation. */
 		{ OV519_GPIO_IO_CTRL0,   0xee },
-		{ 0x51,  0x0f }, /* SetUsbInit */
-		{ 0x51,  0x00 },
-		{ 0x22,  0x00 },
+		{ OV519_R51_RESET1, 0x0f },
+		{ OV519_R51_RESET1, 0x00 },
+		{ 0x22, 0x00 },
 		/* windows reads 0x55 at this point*/
 	};
 
-	return write_regvals(sd, init_519, ARRAY_SIZE(init_519));
+	write_regvals(sd, init_519, ARRAY_SIZE(init_519));
 }
 
-static int ovfx2_configure(struct sd *sd)
+static void ovfx2_configure(struct sd *sd)
 {
 	static const struct ov_regvals init_fx2[] = {
 		{ 0x00, 0x60 },
@@ -2964,7 +3085,92 @@ static int ovfx2_configure(struct sd *sd)
 
 	sd->stopped = 1;
 
-	return write_regvals(sd, init_fx2, ARRAY_SIZE(init_fx2));
+	write_regvals(sd, init_fx2, ARRAY_SIZE(init_fx2));
+}
+
+/* set the mode */
+/* This function works for ov7660 only */
+static void ov519_set_mode(struct sd *sd)
+{
+	static const struct ov_regvals bridge_ov7660[2][10] = {
+		{{0x10, 0x14}, {0x11, 0x1e}, {0x12, 0x00}, {0x13, 0x00},
+		 {0x14, 0x00}, {0x15, 0x00}, {0x16, 0x00}, {0x20, 0x0c},
+		 {0x25, 0x01}, {0x26, 0x00}},
+		{{0x10, 0x28}, {0x11, 0x3c}, {0x12, 0x00}, {0x13, 0x00},
+		 {0x14, 0x00}, {0x15, 0x00}, {0x16, 0x00}, {0x20, 0x0c},
+		 {0x25, 0x03}, {0x26, 0x00}}
+	};
+	static const struct ov_i2c_regvals sensor_ov7660[2][3] = {
+		{{0x12, 0x00}, {0x24, 0x00}, {0x0c, 0x0c}},
+		{{0x12, 0x00}, {0x04, 0x00}, {0x0c, 0x00}}
+	};
+	static const struct ov_i2c_regvals sensor_ov7660_2[] = {
+		{OV7670_R17_HSTART, 0x13},
+		{OV7670_R18_HSTOP, 0x01},
+		{OV7670_R32_HREF, 0x92},
+		{OV7670_R19_VSTART, 0x02},
+		{OV7670_R1A_VSTOP, 0x7a},
+		{OV7670_R03_VREF, 0x00},
+/*		{0x33, 0x00}, */
+/*		{0x34, 0x07}, */
+/*		{0x36, 0x00}, */
+/*		{0x6b, 0x0a}, */
+	};
+
+	write_regvals(sd, bridge_ov7660[sd->gspca_dev.curr_mode],
+			ARRAY_SIZE(bridge_ov7660[0]));
+	write_i2c_regvals(sd, sensor_ov7660[sd->gspca_dev.curr_mode],
+			ARRAY_SIZE(sensor_ov7660[0]));
+	write_i2c_regvals(sd, sensor_ov7660_2,
+			ARRAY_SIZE(sensor_ov7660_2));
+}
+
+/* set the frame rate */
+/* This function works for sensors ov7640, ov7648 ov7660 and ov7670 only */
+static void ov519_set_fr(struct sd *sd)
+{
+	int fr;
+	u8 clock;
+	/* frame rate table with indices:
+	 *	- mode = 0: 320x240, 1: 640x480
+	 *	- fr rate = 0: 30, 1: 25, 2: 20, 3: 15, 4: 10, 5: 5
+	 *	- reg = 0: bridge a4, 1: bridge 23, 2: sensor 11 (clock)
+	 */
+	static const u8 fr_tb[2][6][3] = {
+		{{0x04, 0xff, 0x00},
+		 {0x04, 0x1f, 0x00},
+		 {0x04, 0x1b, 0x00},
+		 {0x04, 0x15, 0x00},
+		 {0x04, 0x09, 0x00},
+		 {0x04, 0x01, 0x00}},
+		{{0x0c, 0xff, 0x00},
+		 {0x0c, 0x1f, 0x00},
+		 {0x0c, 0x1b, 0x00},
+		 {0x04, 0xff, 0x01},
+		 {0x04, 0x1f, 0x01},
+		 {0x04, 0x1b, 0x01}},
+	};
+
+	if (frame_rate > 0)
+		sd->frame_rate = frame_rate;
+	if (sd->frame_rate >= 30)
+		fr = 0;
+	else if (sd->frame_rate >= 25)
+		fr = 1;
+	else if (sd->frame_rate >= 20)
+		fr = 2;
+	else if (sd->frame_rate >= 15)
+		fr = 3;
+	else if (sd->frame_rate >= 10)
+		fr = 4;
+	else
+		fr = 5;
+	reg_w(sd, 0xa4, fr_tb[sd->gspca_dev.curr_mode][fr][0]);
+	reg_w(sd, 0x23, fr_tb[sd->gspca_dev.curr_mode][fr][1]);
+	clock = fr_tb[sd->gspca_dev.curr_mode][fr][2];
+	if (sd->sensor == SEN_OV7660)
+		clock |= 0x80;		/* enable double clock */
+	ov518_i2c_w(sd, OV7670_R11_CLKRC, clock);
 }
 
 /* this function is called at probe time */
@@ -2973,99 +3179,119 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam = &gspca_dev->cam;
-	int ret = 0;
 
 	sd->bridge = id->driver_info & BRIDGE_MASK;
-	sd->invert_led = id->driver_info & BRIDGE_INVERT_LED;
+	sd->invert_led = (id->driver_info & BRIDGE_INVERT_LED) != 0;
 
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		ret = ov511_configure(gspca_dev);
+		cam->cam_mode = ov511_vga_mode;
+		cam->nmodes = ARRAY_SIZE(ov511_vga_mode);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		ret = ov518_configure(gspca_dev);
+		cam->cam_mode = ov518_vga_mode;
+		cam->nmodes = ARRAY_SIZE(ov518_vga_mode);
 		break;
 	case BRIDGE_OV519:
-		ret = ov519_configure(sd);
+		cam->cam_mode = ov519_vga_mode;
+		cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
+		sd->invert_led = !sd->invert_led;
 		break;
 	case BRIDGE_OVFX2:
-		ret = ovfx2_configure(sd);
+		cam->cam_mode = ov519_vga_mode;
+		cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
 		cam->bulk_size = OVFX2_BULK_SIZE;
 		cam->bulk_nurbs = MAX_NURBS;
 		cam->bulk = 1;
 		break;
 	case BRIDGE_W9968CF:
-		ret = w9968cf_configure(sd);
+		cam->cam_mode = w9968cf_vga_mode;
+		cam->nmodes = ARRAY_SIZE(w9968cf_vga_mode);
 		cam->reverse_alts = 1;
 		break;
 	}
 
-	if (ret)
-		goto error;
+	gspca_dev->cam.ctrls = sd->ctrls;
+	sd->quality = QUALITY_DEF;
 
-	ov51x_led_control(sd, 0);	/* turn LED off */
+	return 0;
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
+
+	switch (sd->bridge) {
+	case BRIDGE_OV511:
+	case BRIDGE_OV511PLUS:
+		ov511_configure(gspca_dev);
+		break;
+	case BRIDGE_OV518:
+	case BRIDGE_OV518PLUS:
+		ov518_configure(gspca_dev);
+		break;
+	case BRIDGE_OV519:
+		ov519_configure(sd);
+		break;
+	case BRIDGE_OVFX2:
+		ovfx2_configure(sd);
+		break;
+	case BRIDGE_W9968CF:
+		w9968cf_configure(sd);
+		break;
+	}
 
 	/* The OV519 must be more aggressive about sensor detection since
 	 * I2C write will never fail if the sensor is not present. We have
 	 * to try to initialize the sensor to detect its presence */
+	sd->sensor = -1;
 
 	/* Test for 76xx */
 	if (init_ov_sensor(sd, OV7xx0_SID) >= 0) {
-		if (ov7xx0_configure(sd) < 0) {
-			PDEBUG(D_ERR, "Failed to configure OV7xx0");
-			goto error;
-		}
+		ov7xx0_configure(sd);
+
 	/* Test for 6xx0 */
 	} else if (init_ov_sensor(sd, OV6xx0_SID) >= 0) {
-		if (ov6xx0_configure(sd) < 0) {
-			PDEBUG(D_ERR, "Failed to configure OV6xx0");
-			goto error;
-		}
+		ov6xx0_configure(sd);
+
 	/* Test for 8xx0 */
 	} else if (init_ov_sensor(sd, OV8xx0_SID) >= 0) {
-		if (ov8xx0_configure(sd) < 0) {
-			PDEBUG(D_ERR, "Failed to configure OV8xx0");
-			goto error;
-		}
+		ov8xx0_configure(sd);
+
 	/* Test for 3xxx / 2xxx */
 	} else if (init_ov_sensor(sd, OV_HIRES_SID) >= 0) {
-		if (ov_hires_configure(sd) < 0) {
-			PDEBUG(D_ERR, "Failed to configure high res OV");
-			goto error;
-		}
+		ov_hires_configure(sd);
 	} else {
 		err("Can't determine sensor slave IDs");
 		goto error;
 	}
 
+	if (sd->sensor < 0)
+		goto error;
+
+	ov51x_led_control(sd, 0);	/* turn LED off */
+
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		if (!sd->sif) {
-			cam->cam_mode = ov511_vga_mode;
-			cam->nmodes = ARRAY_SIZE(ov511_vga_mode);
-		} else {
+		if (sd->sif) {
 			cam->cam_mode = ov511_sif_mode;
 			cam->nmodes = ARRAY_SIZE(ov511_sif_mode);
 		}
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		if (!sd->sif) {
-			cam->cam_mode = ov518_vga_mode;
-			cam->nmodes = ARRAY_SIZE(ov518_vga_mode);
-		} else {
+		if (sd->sif) {
 			cam->cam_mode = ov518_sif_mode;
 			cam->nmodes = ARRAY_SIZE(ov518_sif_mode);
 		}
 		break;
 	case BRIDGE_OV519:
-		if (!sd->sif) {
-			cam->cam_mode = ov519_vga_mode;
-			cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
-		} else {
+		if (sd->sif) {
 			cam->cam_mode = ov519_sif_mode;
 			cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
 		}
@@ -3077,118 +3303,107 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		} else if (sd->sensor == SEN_OV3610) {
 			cam->cam_mode = ovfx2_ov3610_mode;
 			cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode);
-		} else if (!sd->sif) {
-			cam->cam_mode = ov519_vga_mode;
-			cam->nmodes = ARRAY_SIZE(ov519_vga_mode);
-		} else {
+		} else if (sd->sif) {
 			cam->cam_mode = ov519_sif_mode;
 			cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
 		}
 		break;
 	case BRIDGE_W9968CF:
-		cam->cam_mode = w9968cf_vga_mode;
-		cam->nmodes = ARRAY_SIZE(w9968cf_vga_mode);
 		if (sd->sif)
-			cam->nmodes--;
+			cam->nmodes = ARRAY_SIZE(w9968cf_vga_mode) - 1;
 
 		/* w9968cf needs initialisation once the sensor is known */
-		if (w9968cf_init(sd) < 0)
-			goto error;
+		w9968cf_init(sd);
 		break;
 	}
-	gspca_dev->cam.ctrls = sd->ctrls;
-	if (sd->sensor == SEN_OV7670)
-		gspca_dev->ctrl_dis = 1 << COLORS;
-	else
-		gspca_dev->ctrl_dis = (1 << HFLIP) | (1 << VFLIP);
-	sd->quality = QUALITY_DEF;
-	if (sd->sensor == SEN_OV7640 ||
-	    sd->sensor == SEN_OV7648)
-		gspca_dev->ctrl_dis |= (1 << AUTOBRIGHT) | (1 << CONTRAST);
-	if (sd->sensor == SEN_OV7670)
-		gspca_dev->ctrl_dis |= 1 << AUTOBRIGHT;
-	/* OV8610 Frequency filter control should work but needs testing */
-	if (sd->sensor == SEN_OV8610)
-		gspca_dev->ctrl_dis |= 1 << FREQ;
-	/* No controls for the OV2610/OV3610 */
-	if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
-		gspca_dev->ctrl_dis |= (1 << NCTRL) - 1;
 
-	return 0;
-error:
-	PDEBUG(D_ERR, "OV519 Config failed");
-	return -EBUSY;
-}
-
-/* this function is called at probe and resume time */
-static int sd_init(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
+	gspca_dev->ctrl_dis = ctrl_dis[sd->sensor];
 
 	/* initialize the sensor */
 	switch (sd->sensor) {
 	case SEN_OV2610:
-		if (write_i2c_regvals(sd, norm_2610, ARRAY_SIZE(norm_2610)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_2610, ARRAY_SIZE(norm_2610));
+
 		/* Enable autogain, autoexpo, awb, bandfilter */
-		if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0)
-			return -EIO;
+		i2c_w_mask(sd, 0x13, 0x27, 0x27);
 		break;
 	case SEN_OV3610:
-		if (write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b));
+
 		/* Enable autogain, autoexpo, awb, bandfilter */
-		if (i2c_w_mask(sd, 0x13, 0x27, 0x27) < 0)
-			return -EIO;
+		i2c_w_mask(sd, 0x13, 0x27, 0x27);
 		break;
 	case SEN_OV6620:
-		if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20));
 		break;
 	case SEN_OV6630:
 	case SEN_OV66308AF:
 		sd->ctrls[CONTRAST].def = 200;
 				 /* The default is too low for the ov6630 */
-		if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30));
 		break;
 	default:
 /*	case SEN_OV7610: */
 /*	case SEN_OV76BE: */
-		if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
-			return -EIO;
-		if (i2c_w_mask(sd, 0x0e, 0x00, 0x40))
-			return -EIO;
+		write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610));
+		i2c_w_mask(sd, 0x0e, 0x00, 0x40);
 		break;
 	case SEN_OV7620:
 	case SEN_OV7620AE:
-		if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620));
 		break;
 	case SEN_OV7640:
 	case SEN_OV7648:
-		if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640));
+		break;
+	case SEN_OV7660:
+		i2c_w(sd, OV7670_R12_COM7, OV7670_COM7_RESET);
+		msleep(14);
+		reg_w(sd, OV519_R57_SNAPSHOT, 0x23);
+		write_regvals(sd, init_519_ov7660,
+				ARRAY_SIZE(init_519_ov7660));
+		write_i2c_regvals(sd, norm_7660, ARRAY_SIZE(norm_7660));
+		sd->gspca_dev.curr_mode = 1;	/* 640x480 */
+		sd->frame_rate = 15;
+		ov519_set_mode(sd);
+		ov519_set_fr(sd);
+		sd->ctrls[COLORS].max = 4;	/* 0..4 */
+		sd->ctrls[COLORS].val =
+			sd->ctrls[COLORS].def = 2;
+		setcolors(gspca_dev);
+		sd->ctrls[CONTRAST].max = 6;	/* 0..6 */
+		sd->ctrls[CONTRAST].val =
+			sd->ctrls[CONTRAST].def = 3;
+		setcontrast(gspca_dev);
+		sd->ctrls[BRIGHTNESS].max = 6;	/* 0..6 */
+		sd->ctrls[BRIGHTNESS].val =
+			sd->ctrls[BRIGHTNESS].def = 3;
+		setbrightness(gspca_dev);
+		sd_reset_snapshot(gspca_dev);
+		ov51x_restart(sd);
+		ov51x_stop(sd);			/* not in win traces */
+		ov51x_led_control(sd, 0);
 		break;
 	case SEN_OV7670:
 		sd->ctrls[FREQ].max = 3;	/* auto */
 		sd->ctrls[FREQ].def = 3;
-		if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670));
 		break;
 	case SEN_OV8610:
-		if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
-			return -EIO;
+		write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610));
 		break;
 	}
-	return 0;
+	return gspca_dev->usb_err;
+error:
+	PDEBUG(D_ERR, "OV519 Config failed");
+	return -EINVAL;
 }
 
 /* Set up the OV511/OV511+ with the given image parameters.
  *
  * Do not put any sensor-specific code in here (including I2C I/O functions)
  */
-static int ov511_mode_init_regs(struct sd *sd)
+static void ov511_mode_init_regs(struct sd *sd)
 {
 	int hsegs, vsegs, packet_size, fps, needed;
 	int interlaced = 0;
@@ -3199,7 +3414,8 @@ static int ov511_mode_init_regs(struct sd *sd)
 	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
 	if (!alt) {
 		err("Couldn't get altsetting");
-		return -EIO;
+		sd->gspca_dev.usb_err = -EIO;
+		return;
 	}
 
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
@@ -3302,8 +3518,6 @@ static int ov511_mode_init_regs(struct sd *sd)
 
 	reg_w(sd, R51x_SYS_RESET, OV511_RESET_OMNICE);
 	reg_w(sd, R51x_SYS_RESET, 0);
-
-	return 0;
 }
 
 /* Sets up the OV518/OV518+ with the given image parameters
@@ -3313,7 +3527,7 @@ static int ov511_mode_init_regs(struct sd *sd)
  *
  * Do not put any sensor-specific code in here (including I2C I/O functions)
  */
-static int ov518_mode_init_regs(struct sd *sd)
+static void ov518_mode_init_regs(struct sd *sd)
 {
 	int hsegs, vsegs, packet_size;
 	struct usb_host_interface *alt;
@@ -3323,14 +3537,14 @@ static int ov518_mode_init_regs(struct sd *sd)
 	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
 	if (!alt) {
 		err("Couldn't get altsetting");
-		return -EIO;
+		sd->gspca_dev.usb_err = -EIO;
+		return;
 	}
 
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
 	ov518_reg_w32(sd, R51x_FIFO_PSIZE, packet_size & ~7, 2);
 
 	/******** Set the mode ********/
-
 	reg_w(sd, 0x2b, 0);
 	reg_w(sd, 0x2c, 0);
 	reg_w(sd, 0x2d, 0);
@@ -3364,7 +3578,7 @@ static int ov518_mode_init_regs(struct sd *sd)
 	/* Windows driver does this here; who knows why */
 	reg_w(sd, 0x2f, 0x80);
 
-	/******** Set the framerate  ********/
+	/******** Set the framerate ********/
 	sd->clockdiv = 1;
 
 	/* Mode independent, but framerate dependent, regs */
@@ -3427,11 +3641,8 @@ static int ov518_mode_init_regs(struct sd *sd)
 	}
 
 	reg_w(sd, 0x2f, 0x80);
-
-	return 0;
 }
 
-
 /* Sets up the OV519 with the given image parameters
  *
  * OV519 needs a completely different approach, until we can figure out what
@@ -3439,12 +3650,12 @@ static int ov518_mode_init_regs(struct sd *sd)
  *
  * Do not put any sensor-specific code in here (including I2C I/O functions)
  */
-static int ov519_mode_init_regs(struct sd *sd)
+static void ov519_mode_init_regs(struct sd *sd)
 {
 	static const struct ov_regvals mode_init_519_ov7670[] = {
 		{ 0x5d,	0x03 }, /* Turn off suspend mode */
 		{ 0x53,	0x9f }, /* was 9b in 1.65-1.08 */
-		{ 0x54,	0x0f }, /* bit2 (jpeg enable) */
+		{ OV519_R54_EN_CLK1, 0x0f }, /* bit2 (jpeg enable) */
 		{ 0xa2,	0x20 }, /* a2-a5 are undocumented */
 		{ 0xa3,	0x18 },
 		{ 0xa4,	0x04 },
@@ -3467,7 +3678,7 @@ static int ov519_mode_init_regs(struct sd *sd)
 	static const struct ov_regvals mode_init_519[] = {
 		{ 0x5d,	0x03 }, /* Turn off suspend mode */
 		{ 0x53,	0x9f }, /* was 9b in 1.65-1.08 */
-		{ 0x54,	0x0f }, /* bit2 (jpeg enable) */
+		{ OV519_R54_EN_CLK1, 0x0f }, /* bit2 (jpeg enable) */
 		{ 0xa2,	0x20 }, /* a2-a5 are undocumented */
 		{ 0xa3,	0x18 },
 		{ 0xa4,	0x04 },
@@ -3486,19 +3697,21 @@ static int ov519_mode_init_regs(struct sd *sd)
 	};
 
 	/******** Set the mode ********/
-	if (sd->sensor != SEN_OV7670) {
-		if (write_regvals(sd, mode_init_519,
-				  ARRAY_SIZE(mode_init_519)))
-			return -EIO;
+	switch (sd->sensor) {
+	default:
+		write_regvals(sd, mode_init_519, ARRAY_SIZE(mode_init_519));
 		if (sd->sensor == SEN_OV7640 ||
 		    sd->sensor == SEN_OV7648) {
 			/* Select 8-bit input mode */
 			reg_w_mask(sd, OV519_R20_DFR, 0x10, 0x10);
 		}
-	} else {
-		if (write_regvals(sd, mode_init_519_ov7670,
-				  ARRAY_SIZE(mode_init_519_ov7670)))
-			return -EIO;
+		break;
+	case SEN_OV7660:
+		return;		/* done by ov519_set_mode/fr() */
+	case SEN_OV7670:
+		write_regvals(sd, mode_init_519_ov7670,
+				ARRAY_SIZE(mode_init_519_ov7670));
+		break;
 	}
 
 	reg_w(sd, OV519_R10_H_SIZE,	sd->gspca_dev.width >> 4);
@@ -3594,17 +3807,16 @@ static int ov519_mode_init_regs(struct sd *sd)
 		}
 		break;
 	}
-	return 0;
 }
 
-static int mode_init_ov_sensor_regs(struct sd *sd)
+static void mode_init_ov_sensor_regs(struct sd *sd)
 {
 	struct gspca_dev *gspca_dev;
 	int qvga, xstart, xend, ystart, yend;
-	__u8 v;
+	u8 v;
 
 	gspca_dev = &sd->gspca_dev;
-	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
+	qvga = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 1;
 
 	/******** Mode (VGA/QVGA) and sensor specific regs ********/
 	switch (sd->sensor) {
@@ -3616,7 +3828,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w_mask(sd, 0x2d, qvga ? 0x40 : 0x00, 0x40);
 		i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
 		i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
-		return 0;
+		return;
 	case SEN_OV3610:
 		if (qvga) {
 			xstart = (1040 - gspca_dev->width) / 2 + (0x1f << 4);
@@ -3640,7 +3852,7 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w(sd, 0x18, xend >> 4);
 		i2c_w(sd, 0x19, ystart >> 3);
 		i2c_w(sd, 0x1a, yend >> 3);
-		return 0;
+		return;
 	case SEN_OV8610:
 		/* For OV8610 qvga means qsvga */
 		i2c_w_mask(sd, OV7610_REG_COM_C, qvga ? (1 << 5) : 0, 1 << 5);
@@ -3687,11 +3899,11 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		/* set COM7_FMT_VGA or COM7_FMT_QVGA
 		 * do we need to set anything else?
 		 *	HSTART etc are set in set_ov_sensor_window itself */
-		i2c_w_mask(sd, OV7670_REG_COM7,
+		i2c_w_mask(sd, OV7670_R12_COM7,
 			 qvga ? OV7670_COM7_FMT_QVGA : OV7670_COM7_FMT_VGA,
 			 OV7670_COM7_FMT_MASK);
 		i2c_w_mask(sd, 0x13, 0x00, 0x20); /* Select 16 bit data bus */
-		i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_AWB,
+		i2c_w_mask(sd, OV7670_R13_COM8, OV7670_COM8_AWB,
 				OV7670_COM8_AWB);
 		if (qvga) {		/* QVGA from ov7670.c by
 					 * Jonathan Corbet */
@@ -3707,21 +3919,21 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		}
 		/* OV7670 hardware window registers are split across
 		 * multiple locations */
-		i2c_w(sd, OV7670_REG_HSTART, xstart >> 3);
-		i2c_w(sd, OV7670_REG_HSTOP, xend >> 3);
-		v = i2c_r(sd, OV7670_REG_HREF);
+		i2c_w(sd, OV7670_R17_HSTART, xstart >> 3);
+		i2c_w(sd, OV7670_R18_HSTOP, xend >> 3);
+		v = i2c_r(sd, OV7670_R32_HREF);
 		v = (v & 0xc0) | ((xend & 0x7) << 3) | (xstart & 0x07);
 		msleep(10);	/* need to sleep between read and write to
 				 * same reg! */
-		i2c_w(sd, OV7670_REG_HREF, v);
+		i2c_w(sd, OV7670_R32_HREF, v);
 
-		i2c_w(sd, OV7670_REG_VSTART, ystart >> 2);
-		i2c_w(sd, OV7670_REG_VSTOP, yend >> 2);
-		v = i2c_r(sd, OV7670_REG_VREF);
+		i2c_w(sd, OV7670_R19_VSTART, ystart >> 2);
+		i2c_w(sd, OV7670_R1A_VSTOP, yend >> 2);
+		v = i2c_r(sd, OV7670_R03_VREF);
 		v = (v & 0xc0) | ((yend & 0x3) << 2) | (ystart & 0x03);
 		msleep(10);	/* need to sleep between read and write to
 				 * same reg! */
-		i2c_w(sd, OV7670_REG_VREF, v);
+		i2c_w(sd, OV7670_R03_VREF, v);
 		break;
 	case SEN_OV6620:
 		i2c_w_mask(sd, 0x14, qvga ? 0x20 : 0x00, 0x20);
@@ -3734,46 +3946,50 @@ static int mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w_mask(sd, 0x12, 0x04, 0x06); /* AWB: 1 Test pattern: 0 */
 		break;
 	default:
-		return -EINVAL;
+		return;
 	}
 
 	/******** Clock programming ********/
 	i2c_w(sd, 0x11, sd->clockdiv);
-
-	return 0;
 }
 
+/* this function works for bridge ov519 and sensors ov7660 and ov7670 only */
 static void sethvflip(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (sd->sensor != SEN_OV7670)
-		return;
 	if (sd->gspca_dev.streaming)
-		ov51x_stop(sd);
-	i2c_w_mask(sd, OV7670_REG_MVFP,
+		reg_w(sd, OV519_R51_RESET1, 0x0f);	/* block stream */
+	i2c_w_mask(sd, OV7670_R1E_MVFP,
 		OV7670_MVFP_MIRROR * sd->ctrls[HFLIP].val
 			| OV7670_MVFP_VFLIP * sd->ctrls[VFLIP].val,
 		OV7670_MVFP_MIRROR | OV7670_MVFP_VFLIP);
 	if (sd->gspca_dev.streaming)
-		ov51x_restart(sd);
+		reg_w(sd, OV519_R51_RESET1, 0x00);	/* restart stream */
 }
 
-static int set_ov_sensor_window(struct sd *sd)
+static void set_ov_sensor_window(struct sd *sd)
 {
 	struct gspca_dev *gspca_dev;
 	int qvga, crop;
 	int hwsbase, hwebase, vwsbase, vwebase, hwscale, vwscale;
-	int ret;
 
 	/* mode setup is fully handled in mode_init_ov_sensor_regs for these */
-	if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610 ||
-	    sd->sensor == SEN_OV7670)
-		return mode_init_ov_sensor_regs(sd);
+	switch (sd->sensor) {
+	case SEN_OV2610:
+	case SEN_OV3610:
+	case SEN_OV7670:
+		mode_init_ov_sensor_regs(sd);
+		return;
+	case SEN_OV7660:
+		ov519_set_mode(sd);
+		ov519_set_fr(sd);
+		return;
+	}
 
 	gspca_dev = &sd->gspca_dev;
-	qvga = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 1;
-	crop = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 2;
+	qvga = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 1;
+	crop = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & 2;
 
 	/* The different sensor ICs handle setting up of window differently.
 	 * IF YOU SET IT WRONG, YOU WILL GET ALL ZERO ISOC DATA FROM OV51x!! */
@@ -3820,7 +4036,7 @@ static int set_ov_sensor_window(struct sd *sd)
 		vwsbase = vwebase = 0x03;
 		break;
 	default:
-		return -EINVAL;
+		return;
 	}
 
 	switch (sd->sensor) {
@@ -3855,23 +4071,18 @@ static int set_ov_sensor_window(struct sd *sd)
 		}
 	}
 
-	ret = mode_init_ov_sensor_regs(sd);
-	if (ret < 0)
-		return ret;
+	mode_init_ov_sensor_regs(sd);
 
 	i2c_w(sd, 0x17, hwsbase);
 	i2c_w(sd, 0x18, hwebase + (sd->sensor_width >> hwscale));
 	i2c_w(sd, 0x19, vwsbase);
 	i2c_w(sd, 0x1a, vwebase + (sd->sensor_height >> vwscale));
-
-	return 0;
 }
 
 /* -- start the camera -- */
 static int sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int ret = 0;
 
 	/* Default for most bridges, allow bridge_mode_init_regs to override */
 	sd->sensor_width = sd->gspca_dev.width;
@@ -3880,50 +4091,46 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	switch (sd->bridge) {
 	case BRIDGE_OV511:
 	case BRIDGE_OV511PLUS:
-		ret = ov511_mode_init_regs(sd);
+		ov511_mode_init_regs(sd);
 		break;
 	case BRIDGE_OV518:
 	case BRIDGE_OV518PLUS:
-		ret = ov518_mode_init_regs(sd);
+		ov518_mode_init_regs(sd);
 		break;
 	case BRIDGE_OV519:
-		ret = ov519_mode_init_regs(sd);
+		ov519_mode_init_regs(sd);
 		break;
 	/* case BRIDGE_OVFX2: nothing to do */
 	case BRIDGE_W9968CF:
-		ret = w9968cf_mode_init_regs(sd);
+		w9968cf_mode_init_regs(sd);
 		break;
 	}
-	if (ret < 0)
-		goto out;
-
-	ret = set_ov_sensor_window(sd);
-	if (ret < 0)
-		goto out;
-
-	setcontrast(gspca_dev);
-	setbrightness(gspca_dev);
-	setcolors(gspca_dev);
-	sethvflip(gspca_dev);
-	setautobright(gspca_dev);
-	setfreq_i(sd);
+
+	set_ov_sensor_window(sd);
+
+	if (!(sd->gspca_dev.ctrl_dis & (1 << CONTRAST)))
+		setcontrast(gspca_dev);
+	if (!(sd->gspca_dev.ctrl_dis & (1 << BRIGHTNESS)))
+		setbrightness(gspca_dev);
+	if (!(sd->gspca_dev.ctrl_dis & (1 << COLORS)))
+		setcolors(gspca_dev);
+	if (!(sd->gspca_dev.ctrl_dis & ((1 << HFLIP) | (1 << VFLIP))))
+		sethvflip(gspca_dev);
+	if (!(sd->gspca_dev.ctrl_dis & (1 << AUTOBRIGHT)))
+		setautobright(gspca_dev);
+	if (!(sd->gspca_dev.ctrl_dis & (1 << FREQ)))
+		setfreq_i(sd);
 
 	/* Force clear snapshot state in case the snapshot button was
 	   pressed while we weren't streaming */
 	sd->snapshot_needs_reset = 1;
 	sd_reset_snapshot(gspca_dev);
-	sd->snapshot_pressed = 0;
 
 	sd->first_frame = 3;
 
-	ret = ov51x_restart(sd);
-	if (ret < 0)
-		goto out;
+	ov51x_restart(sd);
 	ov51x_led_control(sd, 1);
-	return 0;
-out:
-	PDEBUG(D_ERR, "camera start error:%d", ret);
-	return ret;
+	return gspca_dev->usb_err;
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
@@ -3938,8 +4145,21 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (!sd->gspca_dev.present)
+		return;
 	if (sd->bridge == BRIDGE_W9968CF)
 		w9968cf_stop0(sd);
+
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	/* If the last button state is pressed, release it now! */
+	if (sd->snapshot_pressed) {
+		input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+		input_sync(gspca_dev->input_dev);
+		sd->snapshot_pressed = 0;
+	}
+#endif
+	if (sd->bridge == BRIDGE_OV519)
+		reg_w(sd, OV519_R57_SNAPSHOT, 0x23);
 }
 
 static void ov51x_handle_button(struct gspca_dev *gspca_dev, u8 state)
@@ -4160,6 +4380,22 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
+	static const struct ov_i2c_regvals brit_7660[][7] = {
+		{{0x0f, 0x6a}, {0x24, 0x40}, {0x25, 0x2b}, {0x26, 0x90},
+			{0x27, 0xe0}, {0x28, 0xe0}, {0x2c, 0xe0}},
+		{{0x0f, 0x6a}, {0x24, 0x50}, {0x25, 0x40}, {0x26, 0xa1},
+			{0x27, 0xc0}, {0x28, 0xc0}, {0x2c, 0xc0}},
+		{{0x0f, 0x6a}, {0x24, 0x68}, {0x25, 0x58}, {0x26, 0xc2},
+			{0x27, 0xa0}, {0x28, 0xa0}, {0x2c, 0xa0}},
+		{{0x0f, 0x6a}, {0x24, 0x70}, {0x25, 0x68}, {0x26, 0xd3},
+			{0x27, 0x80}, {0x28, 0x80}, {0x2c, 0x80}},
+		{{0x0f, 0x6a}, {0x24, 0x80}, {0x25, 0x70}, {0x26, 0xd3},
+			{0x27, 0x20}, {0x28, 0x20}, {0x2c, 0x20}},
+		{{0x0f, 0x6a}, {0x24, 0x88}, {0x25, 0x78}, {0x26, 0xd3},
+			{0x27, 0x40}, {0x28, 0x40}, {0x2c, 0x40}},
+		{{0x0f, 0x6a}, {0x24, 0x90}, {0x25, 0x80}, {0x26, 0xd4},
+			{0x27, 0x60}, {0x28, 0x60}, {0x2c, 0x60}}
+	};
 
 	val = sd->ctrls[BRIGHTNESS].val;
 	switch (sd->sensor) {
@@ -4179,10 +4415,14 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 		if (!sd->ctrls[AUTOBRIGHT].val)
 			i2c_w(sd, OV7610_REG_BRT, val);
 		break;
+	case SEN_OV7660:
+		write_i2c_regvals(sd, brit_7660[val],
+				ARRAY_SIZE(brit_7660[0]));
+		break;
 	case SEN_OV7670:
 /*win trace
- *		i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_AEC); */
-		i2c_w(sd, OV7670_REG_BRIGHT, ov7670_abs_to_sm(val));
+ *		i2c_w_mask(sd, OV7670_R13_COM8, 0, OV7670_COM8_AEC); */
+		i2c_w(sd, OV7670_R55_BRIGHT, ov7670_abs_to_sm(val));
 		break;
 	}
 }
@@ -4191,6 +4431,64 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
+	static const struct ov_i2c_regvals contrast_7660[][31] = {
+		{{0x6c, 0xf0}, {0x6d, 0xf0}, {0x6e, 0xf8}, {0x6f, 0xa0},
+		 {0x70, 0x58}, {0x71, 0x38}, {0x72, 0x30}, {0x73, 0x30},
+		 {0x74, 0x28}, {0x75, 0x28}, {0x76, 0x24}, {0x77, 0x24},
+		 {0x78, 0x22}, {0x79, 0x28}, {0x7a, 0x2a}, {0x7b, 0x34},
+		 {0x7c, 0x0f}, {0x7d, 0x1e}, {0x7e, 0x3d}, {0x7f, 0x65},
+		 {0x80, 0x70}, {0x81, 0x77}, {0x82, 0x7d}, {0x83, 0x83},
+		 {0x84, 0x88}, {0x85, 0x8d}, {0x86, 0x96}, {0x87, 0x9f},
+		 {0x88, 0xb0}, {0x89, 0xc4}, {0x8a, 0xd9}},
+		{{0x6c, 0xf0}, {0x6d, 0xf0}, {0x6e, 0xf8}, {0x6f, 0x94},
+		 {0x70, 0x58}, {0x71, 0x40}, {0x72, 0x30}, {0x73, 0x30},
+		 {0x74, 0x30}, {0x75, 0x30}, {0x76, 0x2c}, {0x77, 0x24},
+		 {0x78, 0x22}, {0x79, 0x28}, {0x7a, 0x2a}, {0x7b, 0x31},
+		 {0x7c, 0x0f}, {0x7d, 0x1e}, {0x7e, 0x3d}, {0x7f, 0x62},
+		 {0x80, 0x6d}, {0x81, 0x75}, {0x82, 0x7b}, {0x83, 0x81},
+		 {0x84, 0x87}, {0x85, 0x8d}, {0x86, 0x98}, {0x87, 0xa1},
+		 {0x88, 0xb2}, {0x89, 0xc6}, {0x8a, 0xdb}},
+		{{0x6c, 0xf0}, {0x6d, 0xf0}, {0x6e, 0xf0}, {0x6f, 0x84},
+		 {0x70, 0x58}, {0x71, 0x48}, {0x72, 0x40}, {0x73, 0x40},
+		 {0x74, 0x28}, {0x75, 0x28}, {0x76, 0x28}, {0x77, 0x24},
+		 {0x78, 0x26}, {0x79, 0x28}, {0x7a, 0x28}, {0x7b, 0x34},
+		 {0x7c, 0x0f}, {0x7d, 0x1e}, {0x7e, 0x3c}, {0x7f, 0x5d},
+		 {0x80, 0x68}, {0x81, 0x71}, {0x82, 0x79}, {0x83, 0x81},
+		 {0x84, 0x86}, {0x85, 0x8b}, {0x86, 0x95}, {0x87, 0x9e},
+		 {0x88, 0xb1}, {0x89, 0xc5}, {0x8a, 0xd9}},
+		{{0x6c, 0xf0}, {0x6d, 0xf0}, {0x6e, 0xf0}, {0x6f, 0x70},
+		 {0x70, 0x58}, {0x71, 0x58}, {0x72, 0x48}, {0x73, 0x48},
+		 {0x74, 0x38}, {0x75, 0x40}, {0x76, 0x34}, {0x77, 0x34},
+		 {0x78, 0x2e}, {0x79, 0x28}, {0x7a, 0x24}, {0x7b, 0x22},
+		 {0x7c, 0x0f}, {0x7d, 0x1e}, {0x7e, 0x3c}, {0x7f, 0x58},
+		 {0x80, 0x63}, {0x81, 0x6e}, {0x82, 0x77}, {0x83, 0x80},
+		 {0x84, 0x87}, {0x85, 0x8f}, {0x86, 0x9c}, {0x87, 0xa9},
+		 {0x88, 0xc0}, {0x89, 0xd4}, {0x8a, 0xe6}},
+		{{0x6c, 0xa0}, {0x6d, 0xf0}, {0x6e, 0x90}, {0x6f, 0x80},
+		 {0x70, 0x70}, {0x71, 0x80}, {0x72, 0x60}, {0x73, 0x60},
+		 {0x74, 0x58}, {0x75, 0x60}, {0x76, 0x4c}, {0x77, 0x38},
+		 {0x78, 0x38}, {0x79, 0x2a}, {0x7a, 0x20}, {0x7b, 0x0e},
+		 {0x7c, 0x0a}, {0x7d, 0x14}, {0x7e, 0x26}, {0x7f, 0x46},
+		 {0x80, 0x54}, {0x81, 0x64}, {0x82, 0x70}, {0x83, 0x7c},
+		 {0x84, 0x87}, {0x85, 0x93}, {0x86, 0xa6}, {0x87, 0xb4},
+		 {0x88, 0xd0}, {0x89, 0xe5}, {0x8a, 0xf5}},
+		{{0x6c, 0x60}, {0x6d, 0x80}, {0x6e, 0x60}, {0x6f, 0x80},
+		 {0x70, 0x80}, {0x71, 0x80}, {0x72, 0x88}, {0x73, 0x30},
+		 {0x74, 0x70}, {0x75, 0x68}, {0x76, 0x64}, {0x77, 0x50},
+		 {0x78, 0x3c}, {0x79, 0x22}, {0x7a, 0x10}, {0x7b, 0x08},
+		 {0x7c, 0x06}, {0x7d, 0x0e}, {0x7e, 0x1a}, {0x7f, 0x3a},
+		 {0x80, 0x4a}, {0x81, 0x5a}, {0x82, 0x6b}, {0x83, 0x7b},
+		 {0x84, 0x89}, {0x85, 0x96}, {0x86, 0xaf}, {0x87, 0xc3},
+		 {0x88, 0xe1}, {0x89, 0xf2}, {0x8a, 0xfa}},
+		{{0x6c, 0x20}, {0x6d, 0x40}, {0x6e, 0x20}, {0x6f, 0x60},
+		 {0x70, 0x88}, {0x71, 0xc8}, {0x72, 0xc0}, {0x73, 0xb8},
+		 {0x74, 0xa8}, {0x75, 0xb8}, {0x76, 0x80}, {0x77, 0x5c},
+		 {0x78, 0x26}, {0x79, 0x10}, {0x7a, 0x08}, {0x7b, 0x04},
+		 {0x7c, 0x02}, {0x7d, 0x06}, {0x7e, 0x0a}, {0x7f, 0x22},
+		 {0x80, 0x33}, {0x81, 0x4c}, {0x82, 0x64}, {0x83, 0x7b},
+		 {0x84, 0x90}, {0x85, 0xa7}, {0x86, 0xc7}, {0x87, 0xde},
+		 {0x88, 0xf1}, {0x89, 0xf9}, {0x8a, 0xfd}},
+	};
 
 	val = sd->ctrls[CONTRAST].val;
 	switch (sd->sensor) {
@@ -4203,7 +4501,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		i2c_w_mask(sd, OV7610_REG_CNT, val >> 4, 0x0f);
 		break;
 	case SEN_OV8610: {
-		static const __u8 ctab[] = {
+		static const u8 ctab[] = {
 			0x03, 0x09, 0x0b, 0x0f, 0x53, 0x6f, 0x35, 0x7f
 		};
 
@@ -4213,7 +4511,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	    }
 	case SEN_OV7620:
 	case SEN_OV7620AE: {
-		static const __u8 ctab[] = {
+		static const u8 ctab[] = {
 			0x01, 0x05, 0x09, 0x11, 0x15, 0x35, 0x37, 0x57,
 			0x5b, 0xa5, 0xa7, 0xc7, 0xc9, 0xcf, 0xef, 0xff
 		};
@@ -4222,9 +4520,13 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		i2c_w(sd, 0x64, ctab[val >> 4]);
 		break;
 	    }
+	case SEN_OV7660:
+		write_i2c_regvals(sd, contrast_7660[val],
+					ARRAY_SIZE(contrast_7660[0]));
+		break;
 	case SEN_OV7670:
 		/* check that this isn't just the same as ov7610 */
-		i2c_w(sd, OV7670_REG_CONTRAS, val >> 1);
+		i2c_w(sd, OV7670_R56_CONTRAS, val >> 1);
 		break;
 	}
 }
@@ -4233,6 +4535,18 @@ static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int val;
+	static const struct ov_i2c_regvals colors_7660[][6] = {
+		{{0x4f, 0x28}, {0x50, 0x2a}, {0x51, 0x02}, {0x52, 0x0a},
+		 {0x53, 0x19}, {0x54, 0x23}},
+		{{0x4f, 0x47}, {0x50, 0x4a}, {0x51, 0x03}, {0x52, 0x11},
+		 {0x53, 0x2c}, {0x54, 0x3e}},
+		{{0x4f, 0x66}, {0x50, 0x6b}, {0x51, 0x05}, {0x52, 0x19},
+		 {0x53, 0x40}, {0x54, 0x59}},
+		{{0x4f, 0x84}, {0x50, 0x8b}, {0x51, 0x06}, {0x52, 0x20},
+		 {0x53, 0x53}, {0x54, 0x73}},
+		{{0x4f, 0xa3}, {0x50, 0xab}, {0x51, 0x08}, {0x52, 0x28},
+		 {0x53, 0x66}, {0x54, 0x8e}},
+	};
 
 	val = sd->ctrls[COLORS].val;
 	switch (sd->sensor) {
@@ -4256,6 +4570,10 @@ static void setcolors(struct gspca_dev *gspca_dev)
 	case SEN_OV7648:
 		i2c_w(sd, OV7610_REG_SAT, val & 0xf0);
 		break;
+	case SEN_OV7660:
+		write_i2c_regvals(sd, colors_7660[val],
+					ARRAY_SIZE(colors_7660[0]));
+		break;
 	case SEN_OV7670:
 		/* supported later once I work out how to do it
 		 * transparently fail now! */
@@ -4268,38 +4586,31 @@ static void setautobright(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (sd->sensor == SEN_OV7640 || sd->sensor == SEN_OV7648 ||
-	    sd->sensor == SEN_OV7670 ||
-	    sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
-		return;
-
 	i2c_w_mask(sd, 0x2d, sd->ctrls[AUTOBRIGHT].val ? 0x10 : 0x00, 0x10);
 }
 
 static void setfreq_i(struct sd *sd)
 {
-	if (sd->sensor == SEN_OV2610 || sd->sensor == SEN_OV3610)
-		return;
-
-	if (sd->sensor == SEN_OV7670) {
+	if (sd->sensor == SEN_OV7660
+	 || sd->sensor == SEN_OV7670) {
 		switch (sd->ctrls[FREQ].val) {
 		case 0: /* Banding filter disabled */
-			i2c_w_mask(sd, OV7670_REG_COM8, 0, OV7670_COM8_BFILT);
+			i2c_w_mask(sd, OV7670_R13_COM8, 0, OV7670_COM8_BFILT);
 			break;
 		case 1: /* 50 hz */
-			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+			i2c_w_mask(sd, OV7670_R13_COM8, OV7670_COM8_BFILT,
 				   OV7670_COM8_BFILT);
-			i2c_w_mask(sd, OV7670_REG_COM11, 0x08, 0x18);
+			i2c_w_mask(sd, OV7670_R3B_COM11, 0x08, 0x18);
 			break;
 		case 2: /* 60 hz */
-			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+			i2c_w_mask(sd, OV7670_R13_COM8, OV7670_COM8_BFILT,
 				   OV7670_COM8_BFILT);
-			i2c_w_mask(sd, OV7670_REG_COM11, 0x00, 0x18);
+			i2c_w_mask(sd, OV7670_R3B_COM11, 0x00, 0x18);
 			break;
-		case 3: /* Auto hz */
-			i2c_w_mask(sd, OV7670_REG_COM8, OV7670_COM8_BFILT,
+		case 3: /* Auto hz - ov7670 only */
+			i2c_w_mask(sd, OV7670_R13_COM8, OV7670_COM8_BFILT,
 				   OV7670_COM8_BFILT);
-			i2c_w_mask(sd, OV7670_REG_COM11, OV7670_COM11_HZAUTO,
+			i2c_w_mask(sd, OV7670_R3B_COM11, OV7670_COM11_HZAUTO,
 				   0x18);
 			break;
 		}
@@ -4443,14 +4754,14 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x4060), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4061), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4064),
-	 .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+		.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
 	{USB_DEVICE(0x041e, 0x4067), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x041e, 0x4068),
-	 .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+		.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
 	{USB_DEVICE(0x045e, 0x028c), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x054c, 0x0154), .driver_info = BRIDGE_OV519 },
 	{USB_DEVICE(0x054c, 0x0155),
-	 .driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
+		.driver_info = BRIDGE_OV519 | BRIDGE_INVERT_LED },
 	{USB_DEVICE(0x05a9, 0x0511), .driver_info = BRIDGE_OV511 },
 	{USB_DEVICE(0x05a9, 0x0518), .driver_info = BRIDGE_OV518 },
 	{USB_DEVICE(0x05a9, 0x0519), .driver_info = BRIDGE_OV519 },
@@ -4464,7 +4775,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0b62, 0x0059), .driver_info = BRIDGE_OVFX2 },
 	{USB_DEVICE(0x0e96, 0xc001), .driver_info = BRIDGE_OVFX2 },
 	{USB_DEVICE(0x1046, 0x9967), .driver_info = BRIDGE_W9968CF },
-	{USB_DEVICE(0x8020, 0xEF04), .driver_info = BRIDGE_OVFX2 },
+	{USB_DEVICE(0x8020, 0xef04), .driver_info = BRIDGE_OVFX2 },
 	{}
 };
 
diff --git a/drivers/media/video/gspca/ov534.c b/drivers/media/video/gspca/ov534.c
index 88ef03f6235..0edf93973b1 100644
--- a/drivers/media/video/gspca/ov534.c
+++ b/drivers/media/video/gspca/ov534.c
@@ -1243,34 +1243,26 @@ static int sd_querymenu(struct gspca_dev *gspca_dev,
 }
 
 /* get stream parameters (framerate) */
-static int sd_get_streamparm(struct gspca_dev *gspca_dev,
+static void sd_get_streamparm(struct gspca_dev *gspca_dev,
 			     struct v4l2_streamparm *parm)
 {
 	struct v4l2_captureparm *cp = &parm->parm.capture;
 	struct v4l2_fract *tpf = &cp->timeperframe;
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
 	cp->capability |= V4L2_CAP_TIMEPERFRAME;
 	tpf->numerator = 1;
 	tpf->denominator = sd->frame_rate;
-
-	return 0;
 }
 
 /* set stream parameters (framerate) */
-static int sd_set_streamparm(struct gspca_dev *gspca_dev,
+static void sd_set_streamparm(struct gspca_dev *gspca_dev,
 			     struct v4l2_streamparm *parm)
 {
 	struct v4l2_captureparm *cp = &parm->parm.capture;
 	struct v4l2_fract *tpf = &cp->timeperframe;
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-
 	/* Set requested framerate */
 	sd->frame_rate = tpf->denominator / tpf->numerator;
 	if (gspca_dev->streaming)
@@ -1279,8 +1271,6 @@ static int sd_set_streamparm(struct gspca_dev *gspca_dev,
 	/* Return the actual framerate */
 	tpf->numerator = 1;
 	tpf->denominator = sd->frame_rate;
-
-	return 0;
 }
 
 /* sub-driver description */
diff --git a/drivers/media/video/gspca/ov534_9.c b/drivers/media/video/gspca/ov534_9.c
index e831f0d280e..c5244b4b477 100644
--- a/drivers/media/video/gspca/ov534_9.c
+++ b/drivers/media/video/gspca/ov534_9.c
@@ -945,7 +945,6 @@ static void setautogain(struct gspca_dev *gspca_dev)
 	u8 val;
 
 /*fixme: should adjust agc/awb/aec by different controls */
-	val = sd->autogain;
 	val = sccb_read(gspca_dev, 0x13);		/* com8 */
 	sccb_write(gspca_dev, 0xff, 0x00);
 	if (sd->autogain)
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index 15e97fa4c33..96f9986305b 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -162,7 +162,7 @@ static const __u8 pac207_sensor_init[][8] = {
 	{0x10, 0x12, 0x0d, 0x12, 0x0c, 0x01, 0x29, 0x84},
 	{0x49, 0x64, 0x64, 0x64, 0x04, 0x10, 0xf0, 0x30},
 	{0x00, 0x00, 0x00, 0x70, 0xa0, 0xf8, 0x00, 0x00},
-	{0x32, 0x00, 0x96, 0x00, 0xA2, 0x02, 0xaf, 0x00},
+	{0x32, 0x00, 0x96, 0x00, 0xa2, 0x02, 0xaf, 0x00},
 };
 
 static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index,
@@ -228,7 +228,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	idreg[0] = pac207_read_reg(gspca_dev, 0x0000);
 	idreg[1] = pac207_read_reg(gspca_dev, 0x0001);
-	idreg[0] = ((idreg[0] & 0x0F) << 4) | ((idreg[1] & 0xf0) >> 4);
+	idreg[0] = ((idreg[0] & 0x0f) << 4) | ((idreg[1] & 0xf0) >> 4);
 	idreg[1] = idreg[1] & 0x0f;
 	PDEBUG(D_PROBE, "Pixart Sensor ID 0x%02X Chips ID 0x%02X",
 		idreg[0], idreg[1]);
diff --git a/drivers/media/video/gspca/pac7302.c b/drivers/media/video/gspca/pac7302.c
index 55fbea7381b..2700975abce 100644
--- a/drivers/media/video/gspca/pac7302.c
+++ b/drivers/media/video/gspca/pac7302.c
@@ -393,7 +393,7 @@ static const __u8 page3_7302[] = {
 
 static void reg_w_buf(struct gspca_dev *gspca_dev,
 		  __u8 index,
-		  const char *buffer, int len)
+		  const u8 *buffer, int len)
 {
 	int ret;
 
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 7657b43b320..6820f5d58b1 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -261,7 +261,7 @@ static const __u8 page4_7311[] = {
 
 static void reg_w_buf(struct gspca_dev *gspca_dev,
 		  __u8 index,
-		  const char *buffer, int len)
+		  const u8 *buffer, int len)
 {
 	int ret;
 
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
index 6b155ae3a74..cb08d00d0a3 100644
--- a/drivers/media/video/gspca/sn9c20x.c
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -33,6 +33,14 @@ MODULE_LICENSE("GPL");
 
 #define MODULE_NAME "sn9c20x"
 
+/*
+ * Pixel format private data
+ */
+#define SCALE_MASK	0x0f
+#define SCALE_160x120	0
+#define SCALE_320x240	1
+#define SCALE_640x480	2
+#define SCALE_1280x1024	3
 #define MODE_RAW	0x10
 #define MODE_JPEG	0x20
 #define MODE_SXGA	0x80
@@ -348,47 +356,47 @@ static const struct v4l2_pix_format vga_mode[] = {
 		.bytesperline = 160,
 		.sizeimage = 160 * 120 * 4 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 0 | MODE_JPEG},
+		.priv = SCALE_160x120 | MODE_JPEG},
 	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 160 * 120,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 0 | MODE_RAW},
+		.priv = SCALE_160x120 | MODE_RAW},
 	{160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 240 * 120,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 0},
+		.priv = SCALE_160x120},
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 1 | MODE_JPEG},
+		.priv = SCALE_320x240 | MODE_JPEG},
 	{320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 ,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 1 | MODE_RAW},
+		.priv = SCALE_320x240 | MODE_RAW},
 	{320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 480 * 240 ,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 1},
+		.priv = SCALE_320x240},
 	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 2 | MODE_JPEG},
+		.priv = SCALE_640x480 | MODE_JPEG},
 	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 2 | MODE_RAW},
+		.priv = SCALE_640x480 | MODE_RAW},
 	{640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 960 * 480,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 2},
+		.priv = SCALE_640x480},
 };
 
 static const struct v4l2_pix_format sxga_mode[] = {
@@ -396,52 +404,75 @@ static const struct v4l2_pix_format sxga_mode[] = {
 		.bytesperline = 160,
 		.sizeimage = 160 * 120 * 4 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 0 | MODE_JPEG},
+		.priv = SCALE_160x120 | MODE_JPEG},
 	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 160 * 120,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 0 | MODE_RAW},
+		.priv = SCALE_160x120 | MODE_RAW},
 	{160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 240 * 120,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 0},
+		.priv = SCALE_160x120},
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 1 | MODE_JPEG},
+		.priv = SCALE_320x240 | MODE_JPEG},
 	{320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 ,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 1 | MODE_RAW},
+		.priv = SCALE_320x240 | MODE_RAW},
 	{320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 480 * 240 ,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 1},
+		.priv = SCALE_320x240},
 	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
-		.priv = 2 | MODE_JPEG},
+		.priv = SCALE_640x480 | MODE_JPEG},
 	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 2 | MODE_RAW},
+		.priv = SCALE_640x480 | MODE_RAW},
 	{640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 960 * 480,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 2},
+		.priv = SCALE_640x480},
 	{1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 1280,
 		.sizeimage = 1280 * 1024,
 		.colorspace = V4L2_COLORSPACE_SRGB,
-		.priv = 3 | MODE_RAW | MODE_SXGA},
+		.priv = SCALE_1280x1024 | MODE_RAW | MODE_SXGA},
+};
+
+static const struct v4l2_pix_format mono_mode[] = {
+	{160, 120, V4L2_PIX_FMT_GREY, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = SCALE_160x120 | MODE_RAW},
+	{320, 240, V4L2_PIX_FMT_GREY, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 ,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = SCALE_320x240 | MODE_RAW},
+	{640, 480, V4L2_PIX_FMT_GREY, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = SCALE_640x480 | MODE_RAW},
+	{1280, 1024, V4L2_PIX_FMT_GREY, V4L2_FIELD_NONE,
+		.bytesperline = 1280,
+		.sizeimage = 1280 * 1024,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = SCALE_1280x1024 | MODE_RAW | MODE_SXGA},
 };
 
 static const s16 hsv_red_x[] = {
@@ -1029,16 +1060,19 @@ static struct i2c_reg_u16 mt9v011_init[] = {
 };
 
 static struct i2c_reg_u16 mt9m001_init[] = {
-	{0x0d, 0x0001}, {0x0d, 0x0000}, {0x01, 0x000e},
-	{0x02, 0x0014}, {0x03, 0x03c1}, {0x04, 0x0501},
-	{0x05, 0x0083}, {0x06, 0x0006}, {0x0d, 0x0002},
-	{0x0a, 0x0000}, {0x0c, 0x0000}, {0x11, 0x0000},
-	{0x1e, 0x8000}, {0x5f, 0x8904}, {0x60, 0x0000},
-	{0x61, 0x0000}, {0x62, 0x0498}, {0x63, 0x0000},
-	{0x64, 0x0000}, {0x20, 0x111d}, {0x06, 0x00f2},
-	{0x05, 0x0013}, {0x09, 0x10f2}, {0x07, 0x0003},
-	{0x2b, 0x002a}, {0x2d, 0x002a}, {0x2c, 0x002a},
-	{0x2e, 0x0029}, {0x07, 0x0002},
+	{0x0d, 0x0001},
+	{0x0d, 0x0000},
+	{0x04, 0x0500},		/* hres = 1280 */
+	{0x03, 0x0400},		/* vres = 1024 */
+	{0x20, 0x1100},
+	{0x06, 0x0010},
+	{0x2b, 0x0024},
+	{0x2e, 0x0024},
+	{0x35, 0x0024},
+	{0x2d, 0x0020},
+	{0x2c, 0x0020},
+	{0x09, 0x0ad4},
+	{0x35, 0x0057},
 };
 
 static struct i2c_reg_u16 mt9m111_init[] = {
@@ -1224,8 +1258,17 @@ static int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val)
 static int ov9650_init_sensor(struct gspca_dev *gspca_dev)
 {
 	int i;
+	u16 id;
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (i2c_r2(gspca_dev, 0x1c, &id) < 0)
+		return -EINVAL;
+
+	if (id != 0x7fa2) {
+		err("sensor id for ov9650 doesn't match (0x%04x)", id);
+		return -ENODEV;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) {
 		if (i2c_w1(gspca_dev, ov9650_init[i].reg,
 				ov9650_init[i].val) < 0) {
@@ -1425,6 +1468,25 @@ static int mt9m001_init_sensor(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i;
+	u16 id;
+
+	if (i2c_r2(gspca_dev, 0x00, &id) < 0)
+		return -EINVAL;
+
+	/* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */
+	switch (id) {
+	case 0x8411:
+	case 0x8421:
+		info("MT9M001 color sensor detected");
+		break;
+	case 0x8431:
+		info("MT9M001 mono sensor detected");
+		break;
+	default:
+		err("No MT9M001 chip detected, ID = %x\n", id);
+		return -ENODEV;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) {
 		if (i2c_w2(gspca_dev, mt9m001_init[i].reg,
 				mt9m001_init[i].val) < 0) {
@@ -1434,8 +1496,8 @@ static int mt9m001_init_sensor(struct gspca_dev *gspca_dev)
 	}
 	/* disable hflip and vflip */
 	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
-	sd->hstart = 2;
-	sd->vstart = 2;
+	sd->hstart = 1;
+	sd->vstart = 1;
 	return 0;
 }
 
@@ -1977,6 +2039,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->cam_mode = sxga_mode;
 		cam->nmodes = ARRAY_SIZE(sxga_mode);
 		break;
+	case SENSOR_MT9M001:
+		cam->cam_mode = mono_mode;
+		cam->nmodes = ARRAY_SIZE(mono_mode);
+		break;
 	default:
 		cam->cam_mode = vga_mode;
 		cam->nmodes = ARRAY_SIZE(vga_mode);
@@ -2075,7 +2141,6 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	case SENSOR_MT9M001:
 		if (mt9m001_init_sensor(gspca_dev) < 0)
 			return -ENODEV;
-		info("MT9M001 sensor detected");
 		break;
 	case SENSOR_HV7131R:
 		if (hv7131r_init_sensor(gspca_dev) < 0)
@@ -2173,22 +2238,22 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	else if (mode & MODE_JPEG)
 		fmt = 0x2c;
 	else
-		fmt = 0x2f;
+		fmt = 0x2f;	/* YUV 420 */
 
-	switch (mode & 0x0f) {
-	case 3:
+	switch (mode & SCALE_MASK) {
+	case SCALE_1280x1024:
 		scale = 0xc0;
 		info("Set 1280x1024");
 		break;
-	case 2:
+	case SCALE_640x480:
 		scale = 0x80;
 		info("Set 640x480");
 		break;
-	case 1:
+	case SCALE_320x240:
 		scale = 0x90;
 		info("Set 320x240");
 		break;
-	case 0:
+	case SCALE_160x120:
 		scale = 0xa0;
 		info("Set 160x120");
 		break;
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 706f96f9265..73504a3f87b 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -56,6 +56,8 @@ struct sd {
 	int prev_avg_lum;
 	int exp_too_low_cnt;
 	int exp_too_high_cnt;
+	int header_read;
+	u8 header[12]; /* Header without sof marker */
 
 	unsigned short exposure;
 	unsigned char gain;
@@ -71,14 +73,15 @@ struct sd {
 #define BRIDGE_103 1
 
 	__u8 sensor;			/* Type of image sensor chip */
-#define SENSOR_HV7131R 0
-#define SENSOR_OV6650 1
-#define SENSOR_OV7630 2
-#define SENSOR_PAS106 3
-#define SENSOR_PAS202 4
-#define SENSOR_TAS5110C 5
-#define SENSOR_TAS5110D 6
-#define SENSOR_TAS5130CXX 7
+#define SENSOR_HV7131D 0
+#define SENSOR_HV7131R 1
+#define SENSOR_OV6650 2
+#define SENSOR_OV7630 3
+#define SENSOR_PAS106 4
+#define SENSOR_PAS202 5
+#define SENSOR_TAS5110C 6
+#define SENSOR_TAS5110D 7
+#define SENSOR_TAS5130CXX 8
 	__u8 reg11;
 };
 
@@ -303,14 +306,29 @@ static const struct v4l2_pix_format sif_mode[] = {
 		.priv = 0},
 };
 
-static const __u8 initHv7131[] = {
+static const __u8 initHv7131d[] = {
+	0x04, 0x03, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00,
+	0x00, 0x00,
+	0x00, 0x00, 0x00, 0x02, 0x02, 0x00,
+	0x28, 0x1e, 0x60, 0x8e, 0x42,
+	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c
+};
+static const __u8 hv7131d_sensor_init[][8] = {
+	{0xa0, 0x11, 0x01, 0x04, 0x00, 0x00, 0x00, 0x17},
+	{0xa0, 0x11, 0x02, 0x00, 0x00, 0x00, 0x00, 0x17},
+	{0xa0, 0x11, 0x28, 0x00, 0x00, 0x00, 0x00, 0x17},
+	{0xa0, 0x11, 0x30, 0x30, 0x00, 0x00, 0x00, 0x17}, /* reset level */
+	{0xa0, 0x11, 0x34, 0x02, 0x00, 0x00, 0x00, 0x17}, /* pixel bias volt */
+};
+
+static const __u8 initHv7131r[] = {
 	0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00,
 	0x00, 0x00,
 	0x00, 0x00, 0x00, 0x02, 0x01, 0x00,
 	0x28, 0x1e, 0x60, 0x8a, 0x20,
 	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c
 };
-static const __u8 hv7131_sensor_init[][8] = {
+static const __u8 hv7131r_sensor_init[][8] = {
 	{0xc0, 0x11, 0x31, 0x38, 0x2a, 0x2e, 0x00, 0x10},
 	{0xa0, 0x11, 0x01, 0x08, 0x2a, 0x2e, 0x00, 0x10},
 	{0xb0, 0x11, 0x20, 0x00, 0xd0, 0x2e, 0x00, 0x10},
@@ -340,7 +358,7 @@ static const __u8 ov6650_sensor_init[][8] = {
 		 * but blue wont be there. Avoid this data ... */
 	{0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10}, /* format out? */
 	{0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10},
-	{0xa0, 0x60, 0x30, 0x3d, 0x0A, 0xd8, 0xa4, 0x10},
+	{0xa0, 0x60, 0x30, 0x3d, 0x0a, 0xd8, 0xa4, 0x10},
 	/* Enable rgb brightness control */
 	{0xa0, 0x60, 0x61, 0x08, 0x00, 0x00, 0x00, 0x10},
 	/* HDG: Note windows uses the line below, which sets both register 0x60
@@ -505,7 +523,7 @@ static const __u8 pas202_sensor_init[][8] = {
 	{0xa0, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x10},
 	{0xd0, 0x40, 0x04, 0x07, 0x34, 0x00, 0x09, 0x10},
 	{0xd0, 0x40, 0x08, 0x01, 0x00, 0x00, 0x01, 0x10},
-	{0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x01, 0x32, 0x10},
+	{0xd0, 0x40, 0x0c, 0x00, 0x0c, 0x01, 0x32, 0x10},
 	{0xd0, 0x40, 0x10, 0x00, 0x01, 0x00, 0x63, 0x10},
 	{0xa0, 0x40, 0x15, 0x70, 0x01, 0x00, 0x63, 0x10},
 	{0xa0, 0x40, 0x18, 0x00, 0x01, 0x00, 0x63, 0x10},
@@ -551,7 +569,8 @@ static const __u8 tas5130_sensor_init[][8] = {
 };
 
 static struct sensor_data sensor_data[] = {
-SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
+SENS(initHv7131d, NULL, hv7131d_sensor_init, NULL, NULL, F_GAIN, NO_BRIGHTNESS|NO_FREQ, 0),
+SENS(initHv7131r, NULL, hv7131r_sensor_init, NULL, NULL, 0, NO_BRIGHTNESS|NO_EXPO|NO_FREQ, 0),
 SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
 SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
 	F_GAIN, 0, 0x21),
@@ -701,7 +720,18 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
 	unsigned char gain = sd->gain;
 
 	switch (sd->sensor) {
+	case SENSOR_HV7131D: {
+		__u8 i2c[] =
+			{0xc0, 0x11, 0x31, 0x00, 0x00, 0x00, 0x00, 0x17};
 
+		i2c[3] = 0x3f - (sd->gain / 4);
+		i2c[4] = 0x3f - (sd->gain / 4);
+		i2c[5] = 0x3f - (sd->gain / 4);
+
+		if (i2c_w(gspca_dev, i2c) < 0)
+			goto err;
+		break;
+	    }
 	case SENSOR_TAS5110C:
 	case SENSOR_TAS5110D: {
 		__u8 i2c[] =
@@ -788,6 +818,23 @@ static void setexposure(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	switch (sd->sensor) {
+	case SENSOR_HV7131D: {
+		/* Note the datasheet wrongly says line mode exposure uses reg
+		   0x26 and 0x27, testing has shown 0x25 + 0x26 */
+		__u8 i2c[] = {0xc0, 0x11, 0x25, 0x00, 0x00, 0x00, 0x00, 0x17};
+		/* The HV7131D's exposure goes from 0 - 65535, we scale our
+		   exposure of 0-1023 to 0-6138. There are 2 reasons for this:
+		   1) This puts our exposure knee of 200 at approx the point
+		      where the framerate starts dropping
+		   2) At 6138 the framerate has already dropped to 2 fps,
+		      going any lower makes little sense */
+		__u16 reg = sd->exposure * 6;
+		i2c[3] = reg >> 8;
+		i2c[4] = reg & 0xff;
+		if (i2c_w(gspca_dev, i2c) != 0)
+			goto err;
+		break;
+	    }
 	case SENSOR_TAS5110C:
 	case SENSOR_TAS5110D: {
 		/* register 19's high nibble contains the sn9c10x clock divider
@@ -1177,13 +1224,10 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	sd_init(gspca_dev);
 }
 
-static void sd_pkt_scan(struct gspca_dev *gspca_dev,
-			u8 *data,			/* isoc packet */
-			int len)			/* iso packet length */
+static u8* find_sof(struct gspca_dev *gspca_dev, u8 *data, int len)
 {
-	int i;
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct cam *cam = &gspca_dev->cam;
+	int i, header_size = (sd->bridge == BRIDGE_103) ? 18 : 12;
 
 	/* frames start with:
 	 *	ff ff 00 c4 c4 96	synchro
@@ -1194,58 +1238,84 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	 *	ll mm		brightness sum outside auto exposure
 	 *	(xx xx xx xx xx)	audio values for snc103
 	 */
-	if (len > 6 && len < 24) {
-		for (i = 0; i < len - 6; i++) {
-			if (data[0 + i] == 0xff
-			    && data[1 + i] == 0xff
-			    && data[2 + i] == 0x00
-			    && data[3 + i] == 0xc4
-			    && data[4 + i] == 0xc4
-			    && data[5 + i] == 0x96) {	/* start of frame */
-				int lum = -1;
-				int pkt_type = LAST_PACKET;
-				int fr_h_sz = (sd->bridge == BRIDGE_103) ?
-					18 : 12;
-
-				if (len - i < fr_h_sz) {
-					PDEBUG(D_STREAM, "packet too short to"
-						" get avg brightness");
-				} else if (sd->bridge == BRIDGE_103) {
-					lum = data[i + 9] +
-						(data[i + 10] << 8);
-				} else {
-					lum = data[i + 8] + (data[i + 9] << 8);
-				}
-				/* When exposure changes midway a frame we
-				   get a lum of 0 in this case drop 2 frames
-				   as the frames directly after an exposure
-				   change have an unstable image. Sometimes lum
-				   *really* is 0 (cam used in low light with
-				   low exposure setting), so do not drop frames
-				   if the previous lum was 0 too. */
-				if (lum == 0 && sd->prev_avg_lum != 0) {
-					lum = -1;
-					sd->frames_to_drop = 2;
-					sd->prev_avg_lum = 0;
-				} else
-					sd->prev_avg_lum = lum;
-				atomic_set(&sd->avg_lum, lum);
-
-				if (sd->frames_to_drop) {
-					sd->frames_to_drop--;
-					pkt_type = DISCARD_PACKET;
-				}
-
-				gspca_frame_add(gspca_dev, pkt_type,
-						NULL, 0);
-				data += i + fr_h_sz;
-				len -= i + fr_h_sz;
-				gspca_frame_add(gspca_dev, FIRST_PACKET,
-						data, len);
-				return;
+	for (i = 0; i < len; i++) {
+		switch (sd->header_read) {
+		case 0:
+			if (data[i] == 0xff)
+				sd->header_read++;
+			break;
+		case 1:
+			if (data[i] == 0xff)
+				sd->header_read++;
+			else
+				sd->header_read = 0;
+			break;
+		case 2:
+			if (data[i] == 0x00)
+				sd->header_read++;
+			else if (data[i] != 0xff)
+				sd->header_read = 0;
+			break;
+		case 3:
+			if (data[i] == 0xc4)
+				sd->header_read++;
+			else if (data[i] == 0xff)
+				sd->header_read = 1;
+			else
+				sd->header_read = 0;
+			break;
+		case 4:
+			if (data[i] == 0xc4)
+				sd->header_read++;
+			else if (data[i] == 0xff)
+				sd->header_read = 1;
+			else
+				sd->header_read = 0;
+			break;
+		case 5:
+			if (data[i] == 0x96)
+				sd->header_read++;
+			else if (data[i] == 0xff)
+				sd->header_read = 1;
+			else
+				sd->header_read = 0;
+			break;
+		default:
+			sd->header[sd->header_read - 6] = data[i];
+			sd->header_read++;
+			if (sd->header_read == header_size) {
+				sd->header_read = 0;
+				return data + i + 1;
 			}
 		}
 	}
+	return NULL;
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	int fr_h_sz = 0, lum_offset = 0, len_after_sof = 0;
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
+	u8 *sof;
+
+	sof = find_sof(gspca_dev, data, len);
+	if (sof) {
+		if (sd->bridge == BRIDGE_103) {
+			fr_h_sz = 18;
+			lum_offset = 3;
+		} else {
+			fr_h_sz = 12;
+			lum_offset = 2;
+		}
+
+		len_after_sof = len - (sof - data);
+		len = (sof - data) - fr_h_sz;
+		if (len < 0)
+			len = 0;
+	}
 
 	if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) {
 		/* In raw mode we sometimes get some garbage after the frame
@@ -1259,6 +1329,33 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	}
 
 	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
+
+	if (sof) {
+		int  lum = sd->header[lum_offset] +
+			  (sd->header[lum_offset + 1] << 8);
+
+		/* When exposure changes midway a frame we
+		   get a lum of 0 in this case drop 2 frames
+		   as the frames directly after an exposure
+		   change have an unstable image. Sometimes lum
+		   *really* is 0 (cam used in low light with
+		   low exposure setting), so do not drop frames
+		   if the previous lum was 0 too. */
+		if (lum == 0 && sd->prev_avg_lum != 0) {
+			lum = -1;
+			sd->frames_to_drop = 2;
+			sd->prev_avg_lum = 0;
+		} else
+			sd->prev_avg_lum = lum;
+		atomic_set(&sd->avg_lum, lum);
+
+		if (sd->frames_to_drop)
+			sd->frames_to_drop--;
+		else
+			gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0);
+
+		gspca_frame_add(gspca_dev, FIRST_PACKET, sof, len_after_sof);
+	}
 }
 
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
@@ -1431,9 +1528,7 @@ static const struct sd_desc sd_desc = {
 static const struct usb_device_id device_table[] __devinitconst = {
 	{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110C, 102)}, /* TAS5110C1B */
 	{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110C, 101)}, /* TAS5110C1B */
-#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110D, 101)}, /* TAS5110D */
-#endif
 	{USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
 	{USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
 	{USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)},
@@ -1444,9 +1539,12 @@ static const struct usb_device_id device_table[] __devinitconst = {
 #endif
 	{USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)},
 	{USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
+	{USB_DEVICE(0x0c45, 0x602a), SB(HV7131D, 102)},
+	/* {USB_DEVICE(0x0c45, 0x602b), SB(MI0343, 102)}, */
 	{USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
 	{USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
 	{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
+	/* {USB_DEVICE(0x0c45, 0x602b), SB(MI03XX, 102)}, */ /* MI0343 MI0360 MI0330 */
 	{USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 330dadc0010..2d0bb17a30a 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -63,7 +63,10 @@ struct sd {
 #define QUALITY_DEF 80
 	u8 jpegqual;			/* webcam quality */
 
+	u8 reg01;
+	u8 reg17;
 	u8 reg18;
+	u8 flags;
 
 	s8 ag_cnt;
 #define AG_CNT_START 13
@@ -96,6 +99,22 @@ enum sensors {
 	SENSOR_SP80708,
 };
 
+/* device flags */
+#define PDN_INV	1		/* inverse pin S_PWR_DN / sn_xxx tables */
+
+/* sn9c1xx definitions */
+/* register 0x01 */
+#define S_PWR_DN	0x01	/* sensor power down */
+#define S_PDN_INV	0x02	/* inverse pin S_PWR_DN */
+#define V_TX_EN		0x04	/* video transfer enable */
+#define LED		0x08	/* output to pin LED */
+#define SCL_SEL_OD	0x20	/* open-drain mode */
+#define SYS_SEL_48M	0x40	/* system clock 0: 24MHz, 1: 48MHz */
+/* register 0x17 */
+#define MCK_SIZE_MASK	0x1f	/* sensor master clock */
+#define SEN_CLK_EN	0x20	/* enable sensor clock */
+#define DEF_EN		0x80	/* defect pixel by 0: soft, 1: hard */
+
 /* V4L2 controls supported by the driver */
 static void setbrightness(struct gspca_dev *gspca_dev);
 static void setcontrast(struct gspca_dev *gspca_dev);
@@ -1579,22 +1598,22 @@ static void i2c_w_seq(struct gspca_dev *gspca_dev,
 	}
 }
 
+/* check the ID of the hv7131 sensor */
+/* this sequence is needed because it activates the sensor */
 static void hv7131r_probe(struct gspca_dev *gspca_dev)
 {
-	i2c_w1(gspca_dev, 0x02, 0);			/* sensor wakeup */
+	i2c_w1(gspca_dev, 0x02, 0);		/* sensor wakeup */
 	msleep(10);
-	reg_w1(gspca_dev, 0x02, 0x66);			/* Gpio on */
+	reg_w1(gspca_dev, 0x02, 0x66);		/* Gpio on */
 	msleep(10);
-	i2c_r(gspca_dev, 0, 5);				/* read sensor id */
-	if (gspca_dev->usb_buf[0] == 0x02
+	i2c_r(gspca_dev, 0, 5);			/* read sensor id */
+	if (gspca_dev->usb_buf[0] == 0x02	/* chip ID (02 is R) */
 	    && gspca_dev->usb_buf[1] == 0x09
-	    && gspca_dev->usb_buf[2] == 0x01
-	    && gspca_dev->usb_buf[3] == 0x00
-	    && gspca_dev->usb_buf[4] == 0x00) {
-		PDEBUG(D_PROBE, "Sensor sn9c102P HV7131R found");
+	    && gspca_dev->usb_buf[2] == 0x01) {
+		PDEBUG(D_PROBE, "Sensor HV7131R found");
 		return;
 	}
-	PDEBUG(D_PROBE, "Sensor 0x%02x 0x%02x 0x%02x - sn9c102P not found",
+	warn("Erroneous HV7131R ID 0x%02x 0x%02x 0x%02x",
 		gspca_dev->usb_buf[0], gspca_dev->usb_buf[1],
 		gspca_dev->usb_buf[2]);
 }
@@ -1755,141 +1774,6 @@ static void po2030n_probe(struct gspca_dev *gspca_dev)
 	}
 }
 
-static void bridge_init(struct gspca_dev *gspca_dev,
-			  const u8 *sn9c1xx)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	u8 reg0102[2];
-	const u8 *reg9a;
-	static const u8 reg9a_def[] =
-		{0x00, 0x40, 0x20, 0x00, 0x00, 0x00};
-	static const u8 reg9a_spec[] =
-		{0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
-	static const u8 regd4[] = {0x60, 0x00, 0x00};
-
-	/* sensor clock already enabled in sd_init */
-	/* reg_w1(gspca_dev, 0xf1, 0x00); */
-	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
-
-	/* configure gpio */
-	reg0102[0] = sn9c1xx[1];
-	reg0102[1] = sn9c1xx[2];
-	if (gspca_dev->audio)
-		reg0102[1] |= 0x04;	/* keep the audio connection */
-	reg_w(gspca_dev, 0x01, reg0102, 2);
-	reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
-	reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);
-	switch (sd->sensor) {
-	case SENSOR_GC0307:
-	case SENSOR_OV7660:
-	case SENSOR_PO1030:
-	case SENSOR_PO2030N:
-	case SENSOR_SOI768:
-	case SENSOR_SP80708:
-		reg9a = reg9a_spec;
-		break;
-	default:
-		reg9a = reg9a_def;
-		break;
-	}
-	reg_w(gspca_dev, 0x9a, reg9a, 6);
-
-	reg_w(gspca_dev, 0xd4, regd4, sizeof regd4);
-
-	reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
-
-	switch (sd->sensor) {
-	case SENSOR_ADCM1700:
-		reg_w1(gspca_dev, 0x01, 0x43);
-		reg_w1(gspca_dev, 0x17, 0x62);
-		reg_w1(gspca_dev, 0x01, 0x42);
-		reg_w1(gspca_dev, 0x01, 0x42);
-		break;
-	case SENSOR_GC0307:
-		msleep(50);
-		reg_w1(gspca_dev, 0x01, 0x61);
-		reg_w1(gspca_dev, 0x17, 0x22);
-		reg_w1(gspca_dev, 0x01, 0x60);
-		reg_w1(gspca_dev, 0x01, 0x40);
-		msleep(50);
-		break;
-	case SENSOR_MI0360B:
-		reg_w1(gspca_dev, 0x01, 0x61);
-		reg_w1(gspca_dev, 0x17, 0x60);
-		reg_w1(gspca_dev, 0x01, 0x60);
-		reg_w1(gspca_dev, 0x01, 0x40);
-		break;
-	case SENSOR_MT9V111:
-		reg_w1(gspca_dev, 0x01, 0x61);
-		reg_w1(gspca_dev, 0x17, 0x61);
-		reg_w1(gspca_dev, 0x01, 0x60);
-		reg_w1(gspca_dev, 0x01, 0x40);
-		break;
-	case SENSOR_OM6802:
-		msleep(10);
-		reg_w1(gspca_dev, 0x02, 0x73);
-		reg_w1(gspca_dev, 0x17, 0x60);
-		reg_w1(gspca_dev, 0x01, 0x22);
-		msleep(100);
-		reg_w1(gspca_dev, 0x01, 0x62);
-		reg_w1(gspca_dev, 0x17, 0x64);
-		reg_w1(gspca_dev, 0x17, 0x64);
-		reg_w1(gspca_dev, 0x01, 0x42);
-		msleep(10);
-		reg_w1(gspca_dev, 0x01, 0x42);
-		i2c_w8(gspca_dev, om6802_init0[0]);
-		i2c_w8(gspca_dev, om6802_init0[1]);
-		msleep(15);
-		reg_w1(gspca_dev, 0x02, 0x71);
-		msleep(150);
-		break;
-	case SENSOR_OV7630:
-		reg_w1(gspca_dev, 0x01, 0x61);
-		reg_w1(gspca_dev, 0x17, 0xe2);
-		reg_w1(gspca_dev, 0x01, 0x60);
-		reg_w1(gspca_dev, 0x01, 0x40);
-		break;
-	case SENSOR_OV7648:
-		reg_w1(gspca_dev, 0x01, 0x63);
-		reg_w1(gspca_dev, 0x17, 0x20);
-		reg_w1(gspca_dev, 0x01, 0x62);
-		reg_w1(gspca_dev, 0x01, 0x42);
-		break;
-	case SENSOR_PO1030:
-	case SENSOR_SOI768:
-		reg_w1(gspca_dev, 0x01, 0x61);
-		reg_w1(gspca_dev, 0x17, 0x20);
-		reg_w1(gspca_dev, 0x01, 0x60);
-		reg_w1(gspca_dev, 0x01, 0x40);
-		break;
-	case SENSOR_PO2030N:
-	case SENSOR_OV7660:
-		reg_w1(gspca_dev, 0x01, 0x63);
-		reg_w1(gspca_dev, 0x17, 0x20);
-		reg_w1(gspca_dev, 0x01, 0x62);
-		reg_w1(gspca_dev, 0x01, 0x42);
-		break;
-	case SENSOR_SP80708:
-		reg_w1(gspca_dev, 0x01, 0x63);
-		reg_w1(gspca_dev, 0x17, 0x20);
-		reg_w1(gspca_dev, 0x01, 0x62);
-		reg_w1(gspca_dev, 0x01, 0x42);
-		msleep(100);
-		reg_w1(gspca_dev, 0x02, 0x62);
-		break;
-	default:
-/*	case SENSOR_HV7131R: */
-/*	case SENSOR_MI0360: */
-/*	case SENSOR_MO4000: */
-		reg_w1(gspca_dev, 0x01, 0x43);
-		reg_w1(gspca_dev, 0x17, 0x61);
-		reg_w1(gspca_dev, 0x01, 0x42);
-		if (sd->sensor == SENSOR_HV7131R)
-			hv7131r_probe(gspca_dev);
-		break;
-	}
-}
-
 /* this function is called at probe time */
 static int sd_config(struct gspca_dev *gspca_dev,
 			const struct usb_device_id *id)
@@ -1898,7 +1782,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct cam *cam;
 
 	sd->bridge = id->driver_info >> 16;
-	sd->sensor = id->driver_info;
+	sd->sensor = id->driver_info >> 8;
+	sd->flags = id->driver_info;
 
 	cam = &gspca_dev->cam;
 	if (sd->sensor == SENSOR_ADCM1700) {
@@ -1929,7 +1814,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	/* setup a selector by bridge */
 	reg_w1(gspca_dev, 0xf1, 0x01);
 	reg_r(gspca_dev, 0x00, 1);
-	reg_w1(gspca_dev, 0xf1, gspca_dev->usb_buf[0]);
+	reg_w1(gspca_dev, 0xf1, 0x00);
 	reg_r(gspca_dev, 0x00, 1);		/* get sonix chip id */
 	regF1 = gspca_dev->usb_buf[0];
 	if (gspca_dev->usb_err < 0)
@@ -2423,10 +2308,17 @@ static int sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i;
-	u8 reg1, reg17;
+	u8 reg01, reg17;
+	u8 reg0102[2];
 	const u8 *sn9c1xx;
 	const u8 (*init)[8];
+	const u8 *reg9a;
 	int mode;
+	static const u8 reg9a_def[] =
+		{0x00, 0x40, 0x20, 0x00, 0x00, 0x00};
+	static const u8 reg9a_spec[] =
+		{0x00, 0x40, 0x38, 0x30, 0x00, 0x20};
+	static const u8 regd4[] = {0x60, 0x00, 0x00};
 	static const u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
 	static const u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
 	static const u8 CA_adcm1700[] =
@@ -2448,7 +2340,85 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* initialize the bridge */
 	sn9c1xx = sn_tb[sd->sensor];
-	bridge_init(gspca_dev, sn9c1xx);
+
+	/* sensor clock already enabled in sd_init */
+	/* reg_w1(gspca_dev, 0xf1, 0x00); */
+	reg01 = sn9c1xx[1];
+	if (sd->flags & PDN_INV)
+		reg01 ^= S_PDN_INV;		/* power down inverted */
+	reg_w1(gspca_dev, 0x01, reg01);
+
+	/* configure gpio */
+	reg0102[0] = reg01;
+	reg0102[1] = sn9c1xx[2];
+	if (gspca_dev->audio)
+		reg0102[1] |= 0x04;	/* keep the audio connection */
+	reg_w(gspca_dev, 0x01, reg0102, 2);
+	reg_w(gspca_dev, 0x08, &sn9c1xx[8], 2);
+	reg_w(gspca_dev, 0x17, &sn9c1xx[0x17], 5);
+	switch (sd->sensor) {
+	case SENSOR_GC0307:
+	case SENSOR_OV7660:
+	case SENSOR_PO1030:
+	case SENSOR_PO2030N:
+	case SENSOR_SOI768:
+	case SENSOR_SP80708:
+		reg9a = reg9a_spec;
+		break;
+	default:
+		reg9a = reg9a_def;
+		break;
+	}
+	reg_w(gspca_dev, 0x9a, reg9a, 6);
+
+	reg_w(gspca_dev, 0xd4, regd4, sizeof regd4);
+
+	reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
+
+	reg17 = sn9c1xx[0x17];
+	switch (sd->sensor) {
+	case SENSOR_GC0307:
+		msleep(50);		/*fixme: is it useful? */
+		break;
+	case SENSOR_OM6802:
+		msleep(10);
+		reg_w1(gspca_dev, 0x02, 0x73);
+		reg17 |= SEN_CLK_EN;
+		reg_w1(gspca_dev, 0x17, reg17);
+		reg_w1(gspca_dev, 0x01, 0x22);
+		msleep(100);
+		reg01 = SCL_SEL_OD | S_PDN_INV;
+		reg17 &= MCK_SIZE_MASK;
+		reg17 |= 0x04;		/* clock / 4 */
+		break;
+	}
+	reg01 |= SYS_SEL_48M;
+	reg_w1(gspca_dev, 0x01, reg01);
+	reg17 |= SEN_CLK_EN;
+	reg_w1(gspca_dev, 0x17, reg17);
+	reg01 &= ~S_PWR_DN;		/* sensor power on */
+	reg_w1(gspca_dev, 0x01, reg01);
+	reg01 &= ~SYS_SEL_48M;
+	reg_w1(gspca_dev, 0x01, reg01);
+
+	switch (sd->sensor) {
+	case SENSOR_HV7131R:
+		hv7131r_probe(gspca_dev);	/*fixme: is it useful? */
+		break;
+	case SENSOR_OM6802:
+		msleep(10);
+		reg_w1(gspca_dev, 0x01, reg01);
+		i2c_w8(gspca_dev, om6802_init0[0]);
+		i2c_w8(gspca_dev, om6802_init0[1]);
+		msleep(15);
+		reg_w1(gspca_dev, 0x02, 0x71);
+		msleep(150);
+		break;
+	case SENSOR_SP80708:
+		msleep(100);
+		reg_w1(gspca_dev, 0x02, 0x62);
+		break;
+	}
 
 	/* initialize the sensor */
 	i2c_w_seq(gspca_dev, sensor_init[sd->sensor]);
@@ -2476,30 +2446,11 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	}
 	reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
 	switch (sd->sensor) {
-	case SENSOR_GC0307:
-		reg17 = 0xa2;
-		break;
-	case SENSOR_MT9V111:
-	case SENSOR_MI0360B:
-		reg17 = 0xe0;
-		break;
-	case SENSOR_ADCM1700:
-	case SENSOR_OV7630:
-		reg17 = 0xe2;
-		break;
-	case SENSOR_OV7648:
-		reg17 = 0x20;
-		break;
-	case SENSOR_OV7660:
-	case SENSOR_SOI768:
-		reg17 = 0xa0;
-		break;
-	case SENSOR_PO1030:
-	case SENSOR_PO2030N:
-		reg17 = 0xa0;
+	case SENSOR_OM6802:
+/*	case SENSOR_OV7648:		* fixme: sometimes */
 		break;
 	default:
-		reg17 = 0x60;
+		reg17 |= DEF_EN;
 		break;
 	}
 	reg_w1(gspca_dev, 0x17, reg17);
@@ -2546,95 +2497,67 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	init = NULL;
 	mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
-	if (mode)
-		reg1 = 0x46;	/* 320x240: clk 48Mhz, video trf enable */
-	else
-		reg1 = 0x06;	/* 640x480: clk 24Mhz, video trf enable */
-	reg17 = 0x61;		/* 0x:20: enable sensor clock */
+	reg01 |= SYS_SEL_48M | V_TX_EN;
+	reg17 &= ~MCK_SIZE_MASK;
+	reg17 |= 0x02;			/* clock / 2 */
 	switch (sd->sensor) {
 	case SENSOR_ADCM1700:
 		init = adcm1700_sensor_param1;
-		reg1 = 0x46;
-		reg17 = 0xe2;
 		break;
 	case SENSOR_GC0307:
 		init = gc0307_sensor_param1;
-		reg17 = 0xa2;
-		reg1 = 0x44;
+		break;
+	case SENSOR_HV7131R:
+	case SENSOR_MI0360:
+		if (mode)
+			reg01 |= SYS_SEL_48M;	/* 320x240: clk 48Mhz */
+		else
+			reg01 &= ~SYS_SEL_48M;	/* 640x480: clk 24Mhz */
+		reg17 &= ~MCK_SIZE_MASK;
+		reg17 |= 0x01;			/* clock / 1 */
 		break;
 	case SENSOR_MI0360B:
 		init = mi0360b_sensor_param1;
-		reg1 &= ~0x02;		/* don't inverse pin S_PWR_DN */
-		reg17 = 0xe2;
 		break;
 	case SENSOR_MO4000:
-		if (mode) {
-/*			reg1 = 0x46;	 * 320 clk 48Mhz 60fp/s */
-			reg1 = 0x06;	/* clk 24Mz */
-		} else {
-			reg17 = 0x22;	/* 640 MCKSIZE */
-/*			reg1 = 0x06;	 * 640 clk 24Mz (done) */
+		if (mode) {			/* if 320x240 */
+			reg01 &= ~SYS_SEL_48M;	/* clk 24Mz */
+			reg17 &= ~MCK_SIZE_MASK;
+			reg17 |= 0x01;		/* clock / 1 */
 		}
 		break;
 	case SENSOR_MT9V111:
 		init = mt9v111_sensor_param1;
-		if (mode) {
-			reg1 = 0x04;	/* 320 clk 48Mhz */
-		} else {
-/*			reg1 = 0x06;	 * 640 clk 24Mz (done) */
-			reg17 = 0xc2;
-		}
 		break;
 	case SENSOR_OM6802:
 		init = om6802_sensor_param1;
-		reg17 = 0x64;		/* 640 MCKSIZE */
+		if (!mode) {			/* if 640x480 */
+			reg17 &= ~MCK_SIZE_MASK;
+			reg17 |= 0x04;		/* clock / 4 */
+		}
 		break;
 	case SENSOR_OV7630:
 		init = ov7630_sensor_param1;
-		reg17 = 0xe2;
-		reg1 = 0x44;
 		break;
 	case SENSOR_OV7648:
 		init = ov7648_sensor_param1;
-		reg17 = 0x21;
-/*		reg1 = 0x42;		 * 42 - 46? */
+		reg17 &= ~MCK_SIZE_MASK;
+		reg17 |= 0x01;			/* clock / 1 */
 		break;
 	case SENSOR_OV7660:
 		init = ov7660_sensor_param1;
-		if (sd->bridge == BRIDGE_SN9C120) {
-			if (mode) {		/* 320x240 - 160x120 */
-				reg17 = 0xa2;
-				reg1 = 0x44;	/* 48 Mhz, video trf eneble */
-			}
-		} else {
-			reg17 = 0x22;
-			reg1 = 0x06;	/* 24 Mhz, video trf eneble
-					 * inverse power down */
-		}
 		break;
 	case SENSOR_PO1030:
 		init = po1030_sensor_param1;
-		reg17 = 0xa2;
-		reg1 = 0x44;
 		break;
 	case SENSOR_PO2030N:
 		init = po2030n_sensor_param1;
-		reg1 = 0x46;
-		reg17 = 0xa2;
 		break;
 	case SENSOR_SOI768:
 		init = soi768_sensor_param1;
-		reg1 = 0x44;
-		reg17 = 0xa2;
 		break;
 	case SENSOR_SP80708:
 		init = sp80708_sensor_param1;
-		if (mode) {
-/*??			reg1 = 0x04;	 * 320 clk 48Mhz */
-		} else {
-			reg1 = 0x46;	 /* 640 clk 48Mz */
-			reg17 = 0xa2;
-		}
 		break;
 	}
 
@@ -2684,7 +2607,9 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	setjpegqual(gspca_dev);
 
 	reg_w1(gspca_dev, 0x17, reg17);
-	reg_w1(gspca_dev, 0x01, reg1);
+	reg_w1(gspca_dev, 0x01, reg01);
+	sd->reg01 = reg01;
+	sd->reg17 = reg17;
 
 	sethvflip(gspca_dev);
 	setbrightness(gspca_dev);
@@ -2706,41 +2631,64 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		{ 0xa1, 0x21, 0x76, 0x20, 0x00, 0x00, 0x00, 0x10 };
 	static const u8 stopsoi768[] =
 		{ 0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10 };
-	u8 data;
-	const u8 *sn9c1xx;
+	u8 reg01;
+	u8 reg17;
 
-	data = 0x0b;
+	reg01 = sd->reg01;
+	reg17 = sd->reg17 & ~SEN_CLK_EN;
 	switch (sd->sensor) {
+	case SENSOR_ADCM1700:
 	case SENSOR_GC0307:
-		data = 0x29;
+	case SENSOR_PO2030N:
+	case SENSOR_SP80708:
+		reg01 |= LED;
+		reg_w1(gspca_dev, 0x01, reg01);
+		reg01 &= ~(LED | V_TX_EN);
+		reg_w1(gspca_dev, 0x01, reg01);
+/*		reg_w1(gspca_dev, 0x02, 0x??);	 * LED off ? */
 		break;
 	case SENSOR_HV7131R:
+		reg01 &= ~V_TX_EN;
+		reg_w1(gspca_dev, 0x01, reg01);
 		i2c_w8(gspca_dev, stophv7131);
-		data = 0x2b;
 		break;
 	case SENSOR_MI0360:
 	case SENSOR_MI0360B:
+		reg01 &= ~V_TX_EN;
+		reg_w1(gspca_dev, 0x01, reg01);
+/*		reg_w1(gspca_dev, 0x02, 0x40);	  * LED off ? */
 		i2c_w8(gspca_dev, stopmi0360);
-		data = 0x29;
 		break;
-	case SENSOR_OV7648:
-		i2c_w8(gspca_dev, stopov7648);
-		/* fall thru */
 	case SENSOR_MT9V111:
-	case SENSOR_OV7630:
+	case SENSOR_OM6802:
 	case SENSOR_PO1030:
-		data = 0x29;
+		reg01 &= ~V_TX_EN;
+		reg_w1(gspca_dev, 0x01, reg01);
+		break;
+	case SENSOR_OV7630:
+	case SENSOR_OV7648:
+		reg01 &= ~V_TX_EN;
+		reg_w1(gspca_dev, 0x01, reg01);
+		i2c_w8(gspca_dev, stopov7648);
+		break;
+	case SENSOR_OV7660:
+		reg01 &= ~V_TX_EN;
+		reg_w1(gspca_dev, 0x01, reg01);
 		break;
 	case SENSOR_SOI768:
 		i2c_w8(gspca_dev, stopsoi768);
-		data = 0x29;
 		break;
 	}
-	sn9c1xx = sn_tb[sd->sensor];
-	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
-	reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
-	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
-	reg_w1(gspca_dev, 0x01, data);
+
+	reg01 |= SCL_SEL_OD;
+	reg_w1(gspca_dev, 0x01, reg01);
+	reg01 |= S_PWR_DN;		/* sensor power down */
+	reg_w1(gspca_dev, 0x01, reg01);
+	reg_w1(gspca_dev, 0x17, reg17);
+	reg01 &= ~SYS_SEL_48M;		/* clock 24MHz */
+	reg_w1(gspca_dev, 0x01, reg01);
+	reg01 |= LED;
+	reg_w1(gspca_dev, 0x01, reg01);
 	/* Don't disable sensor clock as that disables the button on the cam */
 	/* reg_w1(gspca_dev, 0xf1, 0x01); */
 }
@@ -2954,14 +2902,18 @@ static const struct sd_desc sd_desc = {
 /* -- module initialisation -- */
 #define BS(bridge, sensor) \
 	.driver_info = (BRIDGE_ ## bridge << 16) \
-			| SENSOR_ ## sensor
+			| (SENSOR_ ## sensor << 8)
+#define BSF(bridge, sensor, flags) \
+	.driver_info = (BRIDGE_ ## bridge << 16) \
+			| (SENSOR_ ## sensor << 8) \
+			| (flags)
 static const __devinitdata struct usb_device_id device_table[] = {
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0458, 0x7025), BS(SN9C120, MI0360)},
 	{USB_DEVICE(0x0458, 0x702e), BS(SN9C120, OV7660)},
 #endif
-	{USB_DEVICE(0x045e, 0x00f5), BS(SN9C105, OV7660)},
-	{USB_DEVICE(0x045e, 0x00f7), BS(SN9C105, OV7660)},
+	{USB_DEVICE(0x045e, 0x00f5), BSF(SN9C105, OV7660, PDN_INV)},
+	{USB_DEVICE(0x045e, 0x00f7), BSF(SN9C105, OV7660, PDN_INV)},
 	{USB_DEVICE(0x0471, 0x0327), BS(SN9C105, MI0360)},
 	{USB_DEVICE(0x0471, 0x0328), BS(SN9C105, MI0360)},
 	{USB_DEVICE(0x0471, 0x0330), BS(SN9C105, MI0360)},
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index ad73f4812c0..3a162c6d546 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -597,7 +597,7 @@ static void setgain(struct gspca_dev *gspca_dev)
 	else if (sd->gain < 128)
 		gspca_dev->usb_buf[0] = (sd->gain / 2) | 0x40;
 	else
-		gspca_dev->usb_buf[0] = (sd->gain / 4) | 0xC0;
+		gspca_dev->usb_buf[0] = (sd->gain / 4) | 0xc0;
 
 	gspca_dev->usb_buf[1] = 0;
 	reg_w_buf(gspca_dev, 0x8335, 2);
diff --git a/drivers/media/video/gspca/sq905c.c b/drivers/media/video/gspca/sq905c.c
index c2e88b5303c..8ba19954385 100644
--- a/drivers/media/video/gspca/sq905c.c
+++ b/drivers/media/video/gspca/sq905c.c
@@ -301,6 +301,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x2770, 0x905c)},
 	{USB_DEVICE(0x2770, 0x9050)},
+	{USB_DEVICE(0x2770, 0x9051)},
 	{USB_DEVICE(0x2770, 0x9052)},
 	{USB_DEVICE(0x2770, 0x913d)},
 	{}
diff --git a/drivers/media/video/gspca/sq930x.c b/drivers/media/video/gspca/sq930x.c
index 3e4b0b94c70..a4a98811b9e 100644
--- a/drivers/media/video/gspca/sq930x.c
+++ b/drivers/media/video/gspca/sq930x.c
@@ -687,10 +687,19 @@ static void cmos_probe(struct gspca_dev *gspca_dev)
 		if (gspca_dev->usb_buf[0] != 0)
 			break;
 	}
-	if (i >= ARRAY_SIZE(probe_order))
+	if (i >= ARRAY_SIZE(probe_order)) {
 		err("Unknown sensor");
-	else
-		sd->sensor = probe_order[i];
+		gspca_dev->usb_err = -EINVAL;
+		return;
+	}
+	sd->sensor = probe_order[i];
+	switch (sd->sensor) {
+	case SENSOR_OV7660:
+	case SENSOR_OV9630:
+		err("Sensor %s not yet treated", sensor_tb[sd->sensor].name);
+		gspca_dev->usb_err = -EINVAL;
+		break;
+	}
 }
 
 static void mt9v111_init(struct gspca_dev *gspca_dev)
@@ -867,6 +876,9 @@ static int sd_init(struct gspca_dev *gspca_dev)
  */
 
 	reg_r(gspca_dev, SQ930_CTRL_GET_DEV_INFO, 8);
+	if (gspca_dev->usb_err < 0)
+		return gspca_dev->usb_err;
+
 /* it returns:
  * 03 00 12 93 0b f6 c9 00	live! ultra
  * 03 00 07 93 0b f6 ca 00	live! ultra for notebook
@@ -900,15 +912,15 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	if (sd->sensor == SENSOR_MI0360) {
 
 		/* no sensor probe for icam tracer */
-		if (gspca_dev->usb_buf[5] == 0xf6)	/* if CMOS */
+		if (gspca_dev->usb_buf[5] == 0xf6)	/* if ccd */
 			sd->sensor = SENSOR_ICX098BQ;
 		else
 			cmos_probe(gspca_dev);
 	}
-
-	PDEBUG(D_PROBE, "Sensor %s", sensor_tb[sd->sensor].name);
-
-	global_init(sd, 1);
+	if (gspca_dev->usb_err >= 0) {
+		PDEBUG(D_PROBE, "Sensor %s", sensor_tb[sd->sensor].name);
+		global_init(sd, 1);
+	}
 	return gspca_dev->usb_err;
 }
 
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c
index 086de44a6e5..28ea4175b80 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx.c
@@ -263,7 +263,21 @@ static int stv06xx_init(struct gspca_dev *gspca_dev)
 static int stv06xx_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int err;
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
+	int err, packet_size;
+
+	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+	if (!alt) {
+		PDEBUG(D_ERR, "Couldn't get altsetting");
+		return -EIO;
+	}
+
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+	err = stv06xx_write_bridge(sd, STV_ISO_SIZE_L, packet_size);
+	if (err < 0)
+		return err;
 
 	/* Prepare the sensor for start */
 	err = sd->sensor->start(sd);
@@ -282,6 +296,43 @@ out:
 	return (err < 0) ? err : 0;
 }
 
+static int stv06xx_isoc_init(struct gspca_dev *gspca_dev)
+{
+	struct usb_host_interface *alt;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
+	alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1];
+	alt->endpoint[0].desc.wMaxPacketSize =
+		cpu_to_le16(sd->sensor->max_packet_size[gspca_dev->curr_mode]);
+
+	return 0;
+}
+
+static int stv06xx_isoc_nego(struct gspca_dev *gspca_dev)
+{
+	int ret, packet_size, min_packet_size;
+	struct usb_host_interface *alt;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1];
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+	min_packet_size = sd->sensor->min_packet_size[gspca_dev->curr_mode];
+	if (packet_size <= min_packet_size)
+		return -EIO;
+
+	packet_size -= 100;
+	if (packet_size < min_packet_size)
+		packet_size = min_packet_size;
+	alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(packet_size);
+
+	ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 1);
+	if (ret < 0)
+		PDEBUG(D_ERR|D_STREAM, "set alt 1 err %d", ret);
+
+	return ret;
+}
+
 static void stv06xx_stopN(struct gspca_dev *gspca_dev)
 {
 	int err;
@@ -349,7 +400,7 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
 		}
 
 		/* First byte seem to be 02=data 2nd byte is unknown??? */
-		if (sd->bridge == BRIDGE_ST6422 && (id & 0xFF00) == 0x0200)
+		if (sd->bridge == BRIDGE_ST6422 && (id & 0xff00) == 0x0200)
 			goto frame_data;
 
 		switch (id) {
@@ -462,6 +513,8 @@ static const struct sd_desc sd_desc = {
 	.start = stv06xx_start,
 	.stopN = stv06xx_stopN,
 	.pkt_scan = stv06xx_pkt_scan,
+	.isoc_init = stv06xx_isoc_init,
+	.isoc_nego = stv06xx_isoc_nego,
 #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
 	.int_pkt_scan = sd_int_pkt_scan,
 #endif
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
index cf3d0ccc112..b538dce96f7 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h
@@ -146,6 +146,11 @@ const struct stv06xx_sensor stv06xx_sensor_hdcs1x00 = {
 	.i2c_addr = (0x55 << 1),
 	.i2c_len = 1,
 
+	/* FIXME (see if we can lower min_packet_size, needs testing, and also
+	   adjusting framerate when the bandwidth gets lower) */
+	.min_packet_size = { 847 },
+	.max_packet_size = { 847 },
+
 	.init = hdcs_init,
 	.probe = hdcs_probe_1x00,
 	.start = hdcs_start,
@@ -160,6 +165,11 @@ const struct stv06xx_sensor stv06xx_sensor_hdcs1020 = {
 	.i2c_addr = (0x55 << 1),
 	.i2c_len = 1,
 
+	/* FIXME (see if we can lower min_packet_size, needs testing, and also
+	   adjusting framerate when the bandwidthm gets lower) */
+	.min_packet_size = { 847 },
+	.max_packet_size = { 847 },
+
 	.init = hdcs_init,
 	.probe = hdcs_probe_1020,
 	.start = hdcs_start,
@@ -177,7 +187,6 @@ static const u16 stv_bridge_init[][2] = {
 	{STV_REG04, 0x07},
 
 	{STV_SCAN_RATE, 0x20},
-	{STV_ISO_SIZE_L, 847},
 	{STV_Y_CTRL, 0x01},
 	{STV_X_CTRL, 0x0a}
 };
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c
index 285221e6b39..ac47b4c9438 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.c
@@ -208,11 +208,24 @@ static int pb0100_probe(struct sd *sd)
 
 static int pb0100_start(struct sd *sd)
 {
-	int err;
+	int err, packet_size, max_packet_size;
+	struct usb_host_interface *alt;
+	struct usb_interface *intf;
 	struct cam *cam = &sd->gspca_dev.cam;
 	s32 *sensor_settings = sd->sensor_priv;
 	u32 mode = cam->cam_mode[sd->gspca_dev.curr_mode].priv;
 
+	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
+	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
+	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
+
+	/* If we don't have enough bandwidth use a lower framerate */
+	max_packet_size = sd->sensor->max_packet_size[sd->gspca_dev.curr_mode];
+	if (packet_size < max_packet_size)
+		stv06xx_write_sensor(sd, PB_ROWSPEED, BIT(4)|BIT(3)|BIT(1));
+	else
+		stv06xx_write_sensor(sd, PB_ROWSPEED, BIT(5)|BIT(3)|BIT(1));
+
 	/* Setup sensor window */
 	if (mode & PB0100_CROP_TO_VGA) {
 		stv06xx_write_sensor(sd, PB_RSTART, 30);
@@ -328,9 +341,6 @@ static int pb0100_init(struct sd *sd)
 	stv06xx_write_bridge(sd, STV_REG03, 0x45);
 	stv06xx_write_bridge(sd, STV_REG04, 0x07);
 
-	/* ISO-Size (0x27b: 635... why? - HDCS uses 847) */
-	stv06xx_write_bridge(sd, STV_ISO_SIZE_L, 847);
-
 	/* Scan/timing for the sensor */
 	stv06xx_write_sensor(sd, PB_ROWSPEED, BIT(4)|BIT(3)|BIT(1));
 	stv06xx_write_sensor(sd, PB_CFILLIN, 14);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h
index 4de4fa5ebc5..757de246dc7 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_pb0100.h
@@ -138,6 +138,9 @@ const struct stv06xx_sensor stv06xx_sensor_pb0100 = {
 	.i2c_addr = 0xba,
 	.i2c_len = 2,
 
+	.min_packet_size = { 635, 847 },
+	.max_packet_size = { 847, 923 },
+
 	.init = pb0100_init,
 	.probe = pb0100_probe,
 	.start = pb0100_start,
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
index 934b9cebc1a..fb229d8ded5 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_sensor.h
@@ -53,6 +53,10 @@ struct stv06xx_sensor {
 	/* length of an i2c word */
 	u8 i2c_len;
 
+	/* Isoc packet size (per mode) */
+	int min_packet_size[4];
+	int max_packet_size[4];
+
 	/* Probes if the sensor is connected */
 	int (*probe)(struct sd *sd);
 
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
index 3af53264a36..8a456de4970 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.c
@@ -28,6 +28,20 @@
 
 #include "stv06xx_st6422.h"
 
+/* controls */
+enum e_ctrl {
+	BRIGHTNESS,
+	CONTRAST,
+	GAIN,
+	EXPOSURE,
+	NCTRLS		/* number of controls */
+};
+
+/* sensor settings */
+struct st6422_settings {
+	struct gspca_ctrl ctrls[NCTRLS];
+};
+
 static struct v4l2_pix_format st6422_mode[] = {
 	/* Note we actually get 124 lines of data, of which we skip the 4st
 	   4 as they are garbage */
@@ -57,9 +71,14 @@ static struct v4l2_pix_format st6422_mode[] = {
 	},
 };
 
-static const struct ctrl st6422_ctrl[] = {
-#define BRIGHTNESS_IDX 0
-	{
+/* V4L2 controls supported by the driver */
+static void st6422_set_brightness(struct gspca_dev *gspca_dev);
+static void st6422_set_contrast(struct gspca_dev *gspca_dev);
+static void st6422_set_gain(struct gspca_dev *gspca_dev);
+static void st6422_set_exposure(struct gspca_dev *gspca_dev);
+
+static const struct ctrl st6422_ctrl[NCTRLS] = {
+[BRIGHTNESS] = {
 		{
 			.id		= V4L2_CID_BRIGHTNESS,
 			.type		= V4L2_CTRL_TYPE_INTEGER,
@@ -69,11 +88,9 @@ static const struct ctrl st6422_ctrl[] = {
 			.step		= 1,
 			.default_value  = 3
 		},
-		.set = st6422_set_brightness,
-		.get = st6422_get_brightness
+		.set_control = st6422_set_brightness
 	},
-#define CONTRAST_IDX 1
-	{
+[CONTRAST] = {
 		{
 			.id		= V4L2_CID_CONTRAST,
 			.type		= V4L2_CTRL_TYPE_INTEGER,
@@ -83,11 +100,9 @@ static const struct ctrl st6422_ctrl[] = {
 			.step		= 1,
 			.default_value  = 11
 		},
-		.set = st6422_set_contrast,
-		.get = st6422_get_contrast
+		.set_control = st6422_set_contrast
 	},
-#define GAIN_IDX 2
-	{
+[GAIN] = {
 		{
 			.id		= V4L2_CID_GAIN,
 			.type		= V4L2_CTRL_TYPE_INTEGER,
@@ -97,49 +112,43 @@ static const struct ctrl st6422_ctrl[] = {
 			.step		= 1,
 			.default_value  = 64
 		},
-		.set = st6422_set_gain,
-		.get = st6422_get_gain
+		.set_control = st6422_set_gain
 	},
-#define EXPOSURE_IDX 3
-	{
+[EXPOSURE] = {
 		{
 			.id		= V4L2_CID_EXPOSURE,
 			.type		= V4L2_CTRL_TYPE_INTEGER,
 			.name		= "Exposure",
 			.minimum	= 0,
-			.maximum	= 1023,
+#define EXPOSURE_MAX 1023
+			.maximum	= EXPOSURE_MAX,
 			.step		= 1,
 			.default_value  = 256
 		},
-		.set = st6422_set_exposure,
-		.get = st6422_get_exposure
+		.set_control = st6422_set_exposure
 	},
 };
 
 static int st6422_probe(struct sd *sd)
 {
-	int i;
-	s32 *sensor_settings;
+	struct st6422_settings *sensor_settings;
 
 	if (sd->bridge != BRIDGE_ST6422)
 		return -ENODEV;
 
 	info("st6422 sensor detected");
 
-	sensor_settings = kmalloc(ARRAY_SIZE(st6422_ctrl) * sizeof(s32),
-				  GFP_KERNEL);
+	sensor_settings = kmalloc(sizeof *sensor_settings, GFP_KERNEL);
 	if (!sensor_settings)
 		return -ENOMEM;
 
 	sd->gspca_dev.cam.cam_mode = st6422_mode;
 	sd->gspca_dev.cam.nmodes = ARRAY_SIZE(st6422_mode);
+	sd->gspca_dev.cam.ctrls = sensor_settings->ctrls;
 	sd->desc.ctrls = st6422_ctrl;
 	sd->desc.nctrls = ARRAY_SIZE(st6422_ctrl);
 	sd->sensor_priv = sensor_settings;
 
-	for (i = 0; i < sd->desc.nctrls; i++)
-		sensor_settings[i] = st6422_ctrl[i].qctrl.default_value;
-
 	return 0;
 }
 
@@ -151,11 +160,11 @@ static int st6422_init(struct sd *sd)
 		{ STV_ISO_ENABLE, 0x00 }, /* disable capture */
 		{ 0x1436, 0x00 },
 		{ 0x1432, 0x03 },	/* 0x00-0x1F brightness */
-		{ 0x143a, 0xF9 },	/* 0x00-0x0F contrast */
+		{ 0x143a, 0xf9 },	/* 0x00-0x0F contrast */
 		{ 0x0509, 0x38 },	/* R */
 		{ 0x050a, 0x38 },	/* G */
 		{ 0x050b, 0x38 },	/* B */
-		{ 0x050c, 0x2A },
+		{ 0x050c, 0x2a },
 		{ 0x050d, 0x01 },
 
 
@@ -213,7 +222,6 @@ static int st6422_init(struct sd *sd)
 		{ 0x150e, 0x8e },
 		{ 0x150f, 0x37 },
 		{ 0x15c0, 0x00 },
-		{ 0x15c1, 1023 }, /* 160x120, ISOC_PACKET_SIZE */
 		{ 0x15c3, 0x08 },	/* 0x04/0x14 ... test pictures ??? */
 
 
@@ -235,91 +243,92 @@ static void st6422_disconnect(struct sd *sd)
 	kfree(sd->sensor_priv);
 }
 
-static int st6422_start(struct sd *sd)
+static int setbrightness(struct sd *sd)
 {
-	int err, packet_size;
-	struct cam *cam = &sd->gspca_dev.cam;
-	s32 *sensor_settings = sd->sensor_priv;
-	struct usb_host_interface *alt;
-	struct usb_interface *intf;
-
-	intf = usb_ifnum_to_if(sd->gspca_dev.dev, sd->gspca_dev.iface);
-	alt = usb_altnum_to_altsetting(intf, sd->gspca_dev.alt);
-	if (!alt) {
-		err("Couldn't get altsetting");
-		return -EIO;
-	}
+	struct st6422_settings *sensor_settings = sd->sensor_priv;
 
-	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
-	err = stv06xx_write_bridge(sd, 0x15c1, packet_size);
-	if (err < 0)
-		return err;
+	/* val goes from 0 -> 31 */
+	return stv06xx_write_bridge(sd, 0x1432,
+			sensor_settings->ctrls[BRIGHTNESS].val);
+}
 
-	if (cam->cam_mode[sd->gspca_dev.curr_mode].priv)
-		err = stv06xx_write_bridge(sd, 0x1505, 0x0f);
-	else
-		err = stv06xx_write_bridge(sd, 0x1505, 0x02);
-	if (err < 0)
-		return err;
+static int setcontrast(struct sd *sd)
+{
+	struct st6422_settings *sensor_settings = sd->sensor_priv;
+
+	/* Val goes from 0 -> 15 */
+	return stv06xx_write_bridge(sd, 0x143a,
+			sensor_settings->ctrls[CONTRAST].val | 0xf0);
+}
+
+static int setgain(struct sd *sd)
+{
+	struct st6422_settings *sensor_settings = sd->sensor_priv;
+	u8 gain;
+	int err;
+
+	gain = sensor_settings->ctrls[GAIN].val;
 
-	err = st6422_set_brightness(&sd->gspca_dev,
-				    sensor_settings[BRIGHTNESS_IDX]);
+	/* Set red, green, blue, gain */
+	err = stv06xx_write_bridge(sd, 0x0509, gain);
 	if (err < 0)
 		return err;
 
-	err = st6422_set_contrast(&sd->gspca_dev,
-				  sensor_settings[CONTRAST_IDX]);
+	err = stv06xx_write_bridge(sd, 0x050a, gain);
 	if (err < 0)
 		return err;
 
-	err = st6422_set_exposure(&sd->gspca_dev,
-				  sensor_settings[EXPOSURE_IDX]);
+	err = stv06xx_write_bridge(sd, 0x050b, gain);
 	if (err < 0)
 		return err;
 
-	err = st6422_set_gain(&sd->gspca_dev,
-			      sensor_settings[GAIN_IDX]);
+	/* 2 mystery writes */
+	err = stv06xx_write_bridge(sd, 0x050c, 0x2a);
 	if (err < 0)
 		return err;
 
-	PDEBUG(D_STREAM, "Starting stream");
-
-	return 0;
+	return stv06xx_write_bridge(sd, 0x050d, 0x01);
 }
 
-static int st6422_stop(struct sd *sd)
+static int setexposure(struct sd *sd)
 {
-	PDEBUG(D_STREAM, "Halting stream");
-
-	return 0;
-}
-
-static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	*val = sensor_settings[BRIGHTNESS_IDX];
+	struct st6422_settings *sensor_settings = sd->sensor_priv;
+	u16 expo;
+	int err;
 
-	PDEBUG(D_V4L2, "Read brightness %d", *val);
+	expo = sensor_settings->ctrls[EXPOSURE].val;
+	err = stv06xx_write_bridge(sd, 0x143d, expo & 0xff);
+	if (err < 0)
+		return err;
 
-	return 0;
+	return stv06xx_write_bridge(sd, 0x143e, expo >> 8);
 }
 
-static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
+static int st6422_start(struct sd *sd)
 {
 	int err;
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
+	struct cam *cam = &sd->gspca_dev.cam;
 
-	sensor_settings[BRIGHTNESS_IDX] = val;
+	if (cam->cam_mode[sd->gspca_dev.curr_mode].priv)
+		err = stv06xx_write_bridge(sd, 0x1505, 0x0f);
+	else
+		err = stv06xx_write_bridge(sd, 0x1505, 0x02);
+	if (err < 0)
+		return err;
 
-	if (!gspca_dev->streaming)
-		return 0;
+	err = setbrightness(sd);
+	if (err < 0)
+		return err;
 
-	/* val goes from 0 -> 31 */
-	PDEBUG(D_V4L2, "Set brightness to %d", val);
-	err = stv06xx_write_bridge(sd, 0x1432, val);
+	err = setcontrast(sd);
+	if (err < 0)
+		return err;
+
+	err = setexposure(sd);
+	if (err < 0)
+		return err;
+
+	err = setgain(sd);
 	if (err < 0)
 		return err;
 
@@ -328,125 +337,65 @@ static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val)
 	return (err < 0) ? err : 0;
 }
 
-static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val)
+static int st6422_stop(struct sd *sd)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	*val = sensor_settings[CONTRAST_IDX];
-
-	PDEBUG(D_V4L2, "Read contrast %d", *val);
+	PDEBUG(D_STREAM, "Halting stream");
 
 	return 0;
 }
 
-static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val)
+static void st6422_set_brightness(struct gspca_dev *gspca_dev)
 {
 	int err;
 	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	sensor_settings[CONTRAST_IDX] = val;
 
-	if (!gspca_dev->streaming)
-		return 0;
-
-	/* Val goes from 0 -> 15 */
-	PDEBUG(D_V4L2, "Set contrast to %d\n", val);
-	err = stv06xx_write_bridge(sd, 0x143a, 0xf0 | val);
-	if (err < 0)
-		return err;
+	err = setbrightness(sd);
 
 	/* commit settings */
-	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
-	return (err < 0) ? err : 0;
-}
-
-static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	*val = sensor_settings[GAIN_IDX];
-
-	PDEBUG(D_V4L2, "Read gain %d", *val);
+	if (err >= 0)
+		err = stv06xx_write_bridge(sd, 0x143f, 0x01);
 
-	return 0;
+	gspca_dev->usb_err = err;
 }
 
-static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val)
+static void st6422_set_contrast(struct gspca_dev *gspca_dev)
 {
 	int err;
 	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	sensor_settings[GAIN_IDX] = val;
-
-	if (!gspca_dev->streaming)
-		return 0;
-
-	PDEBUG(D_V4L2, "Set gain to %d", val);
 
-	/* Set red, green, blue, gain */
-	err = stv06xx_write_bridge(sd, 0x0509, val);
-	if (err < 0)
-		return err;
-
-	err = stv06xx_write_bridge(sd, 0x050a, val);
-	if (err < 0)
-		return err;
-
-	err = stv06xx_write_bridge(sd, 0x050b, val);
-	if (err < 0)
-		return err;
-
-	/* 2 mystery writes */
-	err = stv06xx_write_bridge(sd, 0x050c, 0x2a);
-	if (err < 0)
-		return err;
-
-	err = stv06xx_write_bridge(sd, 0x050d, 0x01);
-	if (err < 0)
-		return err;
+	err = setcontrast(sd);
 
 	/* commit settings */
-	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
-	return (err < 0) ? err : 0;
+	if (err >= 0)
+		err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+
+	gspca_dev->usb_err = err;
 }
 
-static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val)
+static void st6422_set_gain(struct gspca_dev *gspca_dev)
 {
+	int err;
 	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
 
-	*val = sensor_settings[EXPOSURE_IDX];
+	err = setgain(sd);
 
-	PDEBUG(D_V4L2, "Read exposure %d", *val);
+	/* commit settings */
+	if (err >= 0)
+		err = stv06xx_write_bridge(sd, 0x143f, 0x01);
 
-	return 0;
+	gspca_dev->usb_err = err;
 }
 
-static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val)
+static void st6422_set_exposure(struct gspca_dev *gspca_dev)
 {
 	int err;
 	struct sd *sd = (struct sd *) gspca_dev;
-	s32 *sensor_settings = sd->sensor_priv;
-
-	sensor_settings[EXPOSURE_IDX] = val;
 
-	if (!gspca_dev->streaming)
-		return 0;
-
-	PDEBUG(D_V4L2, "Set exposure to %d\n", val);
-	err = stv06xx_write_bridge(sd, 0x143d, val & 0xff);
-	if (err < 0)
-		return err;
-
-	err = stv06xx_write_bridge(sd, 0x143e, val >> 8);
-	if (err < 0)
-		return err;
+	err = setexposure(sd);
 
 	/* commit settings */
-	err = stv06xx_write_bridge(sd, 0x143f, 0x01);
-	return (err < 0) ? err : 0;
+	if (err >= 0)
+		err = stv06xx_write_bridge(sd, 0x143f, 0x01);
+
+	gspca_dev->usb_err = err;
 }
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
index b2d45fe5052..d7498e06432 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_st6422.h
@@ -37,18 +37,11 @@ static int st6422_init(struct sd *sd);
 static int st6422_stop(struct sd *sd);
 static void st6422_disconnect(struct sd *sd);
 
-/* V4L2 controls supported by the driver */
-static int st6422_get_brightness(struct gspca_dev *gspca_dev, __s32 *val);
-static int st6422_set_brightness(struct gspca_dev *gspca_dev, __s32 val);
-static int st6422_get_contrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int st6422_set_contrast(struct gspca_dev *gspca_dev, __s32 val);
-static int st6422_get_gain(struct gspca_dev *gspca_dev, __s32 *val);
-static int st6422_set_gain(struct gspca_dev *gspca_dev, __s32 val);
-static int st6422_get_exposure(struct gspca_dev *gspca_dev, __s32 *val);
-static int st6422_set_exposure(struct gspca_dev *gspca_dev, __s32 val);
-
 const struct stv06xx_sensor stv06xx_sensor_st6422 = {
 	.name = "ST6422",
+	/* No known way to lower framerate in case of less bandwidth */
+	.min_packet_size = { 300, 847 },
+	.max_packet_size = { 300, 847 },
 	.init = st6422_init,
 	.probe = st6422_probe,
 	.start = st6422_start,
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
index b3b5508473b..7fe3587f5f7 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_vv6410.h
@@ -197,6 +197,10 @@ const struct stv06xx_sensor stv06xx_sensor_vv6410 = {
 	.i2c_flush = 5,
 	.i2c_addr = 0x20,
 	.i2c_len = 1,
+	/* FIXME (see if we can lower packet_size-s, needs testing, and also
+	   adjusting framerate when the bandwidth gets lower) */
+	.min_packet_size = { 1023 },
+	.max_packet_size = { 1023 },
 	.init = vv6410_init,
 	.probe = vv6410_probe,
 	.start = vv6410_start,
@@ -220,10 +224,6 @@ static const u8 x1536[] = {	/* 0x1536 - 0x153b */
 	0x02, 0x00, 0x60, 0x01, 0x20, 0x01
 };
 
-static const u8 x15c1[] = {	/* 0x15c1 - 0x15c2 */
-	0xff, 0x03 /* Output word 0x03ff = 1023 (ISO size) */
-};
-
 static const struct stv_init stv_bridge_init[] = {
 	/* This reg is written twice. Some kind of reset? */
 	{NULL,  0x1620, 0x80},
@@ -232,7 +232,6 @@ static const struct stv_init stv_bridge_init[] = {
 	{NULL,  0x1423, 0x04},
 	{x1500, 0x1500, ARRAY_SIZE(x1500)},
 	{x1536, 0x1536, ARRAY_SIZE(x1536)},
-	{x15c1, 0x15c1, ARRAY_SIZE(x15c1)}
 };
 
 static const u8 vv6410_sensor_init[][2] = {
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index b45f4d0f399..8f0c33116e0 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -487,7 +487,7 @@ static const u8 gamma_table[GAMMA_MAX][17] = {
 	{0x00, 0x02, 0x07, 0x0f, 0x18, 0x24, 0x30, 0x3f,	/* 3 */
 	 0x4f, 0x61, 0x73, 0x88, 0x9d, 0xb4, 0xcd, 0xe6,
 	 0xff},
-	{0x00, 0x04, 0x0B, 0x15, 0x20, 0x2d, 0x3b, 0x4a,	/* 4 */
+	{0x00, 0x04, 0x0b, 0x15, 0x20, 0x2d, 0x3b, 0x4a,	/* 4 */
 	 0x5b, 0x6c, 0x7f, 0x92, 0xa7, 0xbc, 0xd2, 0xe9,
 	 0xff},
 	{0x00, 0x07, 0x11, 0x15, 0x20, 0x2d, 0x48, 0x58,	/* 5 */
diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c
index d9e3c605078..38c22f0a426 100644
--- a/drivers/media/video/gspca/tv8532.c
+++ b/drivers/media/video/gspca/tv8532.c
@@ -132,7 +132,7 @@ static const struct v4l2_pix_format sif_mode[] = {
 #define R36_PID		0x36
 #define R37_PIDH	0x37
 #define R39_Test1	0x39		/* GPIO */
-#define R3B_Test3	0x3B		/* GPIO */
+#define R3B_Test3	0x3b		/* GPIO */
 #define R83_AD_IDH	0x83
 #define R91_AD_SLOPEREG 0x91
 #define R94_AD_BITCONTROL 0x94
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 38a6efe1a5f..9b2ae1b6cc7 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -47,24 +47,29 @@ struct sd {
 	u8 image_offset;
 
 	u8 bridge;
-#define BRIDGE_VC0321 0
-#define BRIDGE_VC0323 1
 	u8 sensor;
-#define SENSOR_HV7131R 0
-#define SENSOR_MI0360 1
-#define SENSOR_MI1310_SOC 2
-#define SENSOR_MI1320 3
-#define SENSOR_MI1320_SOC 4
-#define SENSOR_OV7660 5
-#define SENSOR_OV7670 6
-#define SENSOR_PO1200 7
-#define SENSOR_PO3130NC 8
-#define SENSOR_POxxxx 9
 	u8 flags;
 #define FL_SAMSUNG 0x01		/* SamsungQ1 (2 sensors) */
 #define FL_HFLIP 0x02		/* mirrored by default */
 #define FL_VFLIP 0x04		/* vertical flipped by default */
 };
+enum bridges {
+	BRIDGE_VC0321,
+	BRIDGE_VC0323,
+};
+enum sensors {
+	SENSOR_HV7131R,
+	SENSOR_MI0360,
+	SENSOR_MI1310_SOC,
+	SENSOR_MI1320,
+	SENSOR_MI1320_SOC,
+	SENSOR_OV7660,
+	SENSOR_OV7670,
+	SENSOR_PO1200,
+	SENSOR_PO3130NC,
+	SENSOR_POxxxx,
+	NSENSORS
+};
 
 /* V4L2 controls supported by the driver */
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
@@ -260,56 +265,56 @@ static const struct ctrl sd_ctrls[] = {
 };
 
 /* table of the disabled controls */
-static u32 ctrl_dis[] = {
-/* SENSOR_HV7131R 0 */
+static u32 ctrl_dis[NSENSORS] = {
+    [SENSOR_HV7131R] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
 		| (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_MI0360 1 */
+    [SENSOR_MI0360] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
 		| (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_MI1310_SOC 2 */
+    [SENSOR_MI1310_SOC] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_MI1320 3 */
+    [SENSOR_MI1320] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_MI1320_SOC 4 */
+    [SENSOR_MI1320_SOC] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_OV7660 5 */
+    [SENSOR_OV7660] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << LIGHTFREQ_IDX) | (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_OV7670 6 */
+    [SENSOR_OV7670] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_PO1200 7 */
+    [SENSOR_PO1200] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << LIGHTFREQ_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_PO3130NC 8 */
+    [SENSOR_PO3130NC] =
 	(1 << BRIGHTNESS_IDX) | (1 << CONTRAST_IDX) | (1 << COLORS_IDX)
 		| (1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX)
 		| (1 << SHARPNESS_IDX)
 		| (1 << GAIN_IDX) | (1 << EXPOSURE_IDX)
 		| (1 << AUTOGAIN_IDX) | (1 << BACKLIGHT_IDX),
-/* SENSOR_POxxxx 9 */
+    [SENSOR_POxxxx] =
 	(1 << HFLIP_IDX) | (1 << VFLIP_IDX) | (1 << LIGHTFREQ_IDX),
 };
 
@@ -3420,17 +3425,18 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 	int sensor;
-	static u8 npkt[] = {	/* number of packets per ISOC message */
-		64,		/* HV7131R 0 */
-		32,		/* MI0360 1 */
-		32,		/* MI1310_SOC 2 */
-		64,		/* MI1320 3 */
-		128,		/* MI1320_SOC 4 */
-		32,		/* OV7660 5 */
-		64,		/* OV7670 6 */
-		128,		/* PO1200 7 */
-		128,		/* PO3130NC 8 */
-		128,		/* POxxxx 9 */
+	/* number of packets per ISOC message */
+	static u8 npkt[NSENSORS] = {
+		[SENSOR_HV7131R] =	64,
+		[SENSOR_MI0360] =	32,
+		[SENSOR_MI1310_SOC] =	32,
+		[SENSOR_MI1320] =	64,
+		[SENSOR_MI1320_SOC] =	128,
+		[SENSOR_OV7660] =	32,
+		[SENSOR_OV7670] =	64,
+		[SENSOR_PO1200] =	128,
+		[SENSOR_PO3130NC] =	128,
+		[SENSOR_POxxxx] =	128,
 	};
 
 	if (sd->sensor != SENSOR_POxxxx)
diff --git a/drivers/media/video/gspca/w996Xcf.c b/drivers/media/video/gspca/w996Xcf.c
index 4066ac8c45a..4a9e622e5e1 100644
--- a/drivers/media/video/gspca/w996Xcf.c
+++ b/drivers/media/video/gspca/w996Xcf.c
@@ -59,18 +59,21 @@ static const struct v4l2_pix_format w9968cf_vga_mode[] = {
 		.colorspace = V4L2_COLORSPACE_JPEG},
 };
 
-static int reg_w(struct sd *sd, __u16 index, __u16 value);
+static void reg_w(struct sd *sd, u16 index, u16 value);
 
 /*--------------------------------------------------------------------------
   Write 64-bit data to the fast serial bus registers.
   Return 0 on success, -1 otherwise.
   --------------------------------------------------------------------------*/
-static int w9968cf_write_fsb(struct sd *sd, u16* data)
+static void w9968cf_write_fsb(struct sd *sd, u16* data)
 {
 	struct usb_device *udev = sd->gspca_dev.dev;
 	u16 value;
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return;
+
 	value = *data++;
 	memcpy(sd->gspca_dev.usb_buf, data, 6);
 
@@ -79,20 +82,21 @@ static int w9968cf_write_fsb(struct sd *sd, u16* data)
 			      value, 0x06, sd->gspca_dev.usb_buf, 6, 500);
 	if (ret < 0) {
 		err("Write FSB registers failed (%d)", ret);
-		return ret;
+		sd->gspca_dev.usb_err = ret;
 	}
-
-	return 0;
 }
 
 /*--------------------------------------------------------------------------
   Write data to the serial bus control register.
   Return 0 on success, a negative number otherwise.
   --------------------------------------------------------------------------*/
-static int w9968cf_write_sb(struct sd *sd, u16 value)
+static void w9968cf_write_sb(struct sd *sd, u16 value)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return;
+
 	/* We don't use reg_w here, as that would cause all writes when
 	   bitbanging i2c to be logged, making the logs impossible to read */
 	ret = usb_control_msg(sd->gspca_dev.dev,
@@ -105,10 +109,8 @@ static int w9968cf_write_sb(struct sd *sd, u16 value)
 
 	if (ret < 0) {
 		err("Write SB reg [01] %04x failed", value);
-		return ret;
+		sd->gspca_dev.usb_err = ret;
 	}
-
-	return 0;
 }
 
 /*--------------------------------------------------------------------------
@@ -119,6 +121,9 @@ static int w9968cf_read_sb(struct sd *sd)
 {
 	int ret;
 
+	if (sd->gspca_dev.usb_err < 0)
+		return -1;
+
 	/* We don't use reg_r here, as the w9968cf is special and has 16
 	   bit registers instead of 8 bit */
 	ret = usb_control_msg(sd->gspca_dev.dev,
@@ -126,11 +131,13 @@ static int w9968cf_read_sb(struct sd *sd)
 			1,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0, 0x01, sd->gspca_dev.usb_buf, 2, 500);
-	if (ret >= 0)
+	if (ret >= 0) {
 		ret = sd->gspca_dev.usb_buf[0] |
 		      (sd->gspca_dev.usb_buf[1] << 8);
-	else
+	} else {
 		err("Read SB reg [01] failed");
+		sd->gspca_dev.usb_err = ret;
+	}
 
 	udelay(W9968CF_I2C_BUS_DELAY);
 
@@ -142,22 +149,20 @@ static int w9968cf_read_sb(struct sd *sd)
   This function is called by w9968cf_start_transfer().
   Return 0 on success, a negative number otherwise.
   --------------------------------------------------------------------------*/
-static int w9968cf_upload_quantizationtables(struct sd *sd)
+static void w9968cf_upload_quantizationtables(struct sd *sd)
 {
 	u16 a, b;
-	int ret = 0, i, j;
+	int i, j;
 
-	ret += reg_w(sd, 0x39, 0x0010); /* JPEG clock enable */
+	reg_w(sd, 0x39, 0x0010); /* JPEG clock enable */
 
 	for (i = 0, j = 0; i < 32; i++, j += 2) {
-		a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j+1]) << 8);
-		b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j+1]) << 8);
-		ret += reg_w(sd, 0x40+i, a);
-		ret += reg_w(sd, 0x60+i, b);
+		a = Y_QUANTABLE[j] | ((unsigned)(Y_QUANTABLE[j + 1]) << 8);
+		b = UV_QUANTABLE[j] | ((unsigned)(UV_QUANTABLE[j + 1]) << 8);
+		reg_w(sd, 0x40 + i, a);
+		reg_w(sd, 0x60 + i, b);
 	}
-	ret += reg_w(sd, 0x39, 0x0012); /* JPEG encoder enable */
-
-	return ret;
+	reg_w(sd, 0x39, 0x0012); /* JPEG encoder enable */
 }
 
 /****************************************************************************
@@ -168,50 +173,39 @@ static int w9968cf_upload_quantizationtables(struct sd *sd)
  * i2c_adap_read_byte()                                                     *
  ****************************************************************************/
 
-static int w9968cf_smbus_start(struct sd *sd)
+static void w9968cf_smbus_start(struct sd *sd)
 {
-	int ret = 0;
-
-	ret += w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
-	ret += w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
-
-	return ret;
+	w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+	w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
 }
 
-static int w9968cf_smbus_stop(struct sd *sd)
+static void w9968cf_smbus_stop(struct sd *sd)
 {
-	int ret = 0;
-
-	ret += w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
-	ret += w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
-	ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
-
-	return ret;
+	w9968cf_write_sb(sd, 0x0010); /* SDE=1, SDA=0, SCL=0 */
+	w9968cf_write_sb(sd, 0x0011); /* SDE=1, SDA=0, SCL=1 */
+	w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
 }
 
-static int w9968cf_smbus_write_byte(struct sd *sd, u8 v)
+static void w9968cf_smbus_write_byte(struct sd *sd, u8 v)
 {
 	u8 bit;
-	int ret = 0, sda;
+	int sda;
 
 	for (bit = 0 ; bit < 8 ; bit++) {
 		sda = (v & 0x80) ? 2 : 0;
 		v <<= 1;
 		/* SDE=1, SDA=sda, SCL=0 */
-		ret += w9968cf_write_sb(sd, 0x10 | sda);
+		w9968cf_write_sb(sd, 0x10 | sda);
 		/* SDE=1, SDA=sda, SCL=1 */
-		ret += w9968cf_write_sb(sd, 0x11 | sda);
+		w9968cf_write_sb(sd, 0x11 | sda);
 		/* SDE=1, SDA=sda, SCL=0 */
-		ret += w9968cf_write_sb(sd, 0x10 | sda);
+		w9968cf_write_sb(sd, 0x10 | sda);
 	}
-
-	return ret;
 }
 
-static int w9968cf_smbus_read_byte(struct sd *sd, u8* v)
+static void w9968cf_smbus_read_byte(struct sd *sd, u8 *v)
 {
 	u8 bit;
-	int ret = 0;
 
 	/* No need to ensure SDA is high as we are always called after
 	   read_ack which ends with SDA high */
@@ -219,51 +213,40 @@ static int w9968cf_smbus_read_byte(struct sd *sd, u8* v)
 	for (bit = 0 ; bit < 8 ; bit++) {
 		*v <<= 1;
 		/* SDE=1, SDA=1, SCL=1 */
-		ret += w9968cf_write_sb(sd, 0x0013);
+		w9968cf_write_sb(sd, 0x0013);
 		*v |= (w9968cf_read_sb(sd) & 0x0008) ? 1 : 0;
 		/* SDE=1, SDA=1, SCL=0 */
-		ret += w9968cf_write_sb(sd, 0x0012);
+		w9968cf_write_sb(sd, 0x0012);
 	}
-
-	return ret;
 }
 
-static int w9968cf_smbus_write_nack(struct sd *sd)
+static void w9968cf_smbus_write_nack(struct sd *sd)
 {
-	int ret = 0;
-
 	/* No need to ensure SDA is high as we are always called after
 	   read_byte which ends with SDA high */
-	ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
-	ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
-
-	return ret;
+	w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+	w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
 }
 
-static int w9968cf_smbus_read_ack(struct sd *sd)
+static void w9968cf_smbus_read_ack(struct sd *sd)
 {
-	int ret = 0, sda;
+	int sda;
 
 	/* Ensure SDA is high before raising clock to avoid a spurious stop */
-	ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
-	ret += w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
+	w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
+	w9968cf_write_sb(sd, 0x0013); /* SDE=1, SDA=1, SCL=1 */
 	sda = w9968cf_read_sb(sd);
-	ret += w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
-	if (sda < 0)
-		ret += sda;
-	else if (sda & 0x08) {
+	w9968cf_write_sb(sd, 0x0012); /* SDE=1, SDA=1, SCL=0 */
+	if (sda >= 0 && (sda & 0x08)) {
 		PDEBUG(D_USBI, "Did not receive i2c ACK");
-		ret += -1;
+		sd->gspca_dev.usb_err = -EIO;
 	}
-
-	return ret;
 }
 
 /* SMBus protocol: S Addr Wr [A] Subaddr [A] Value [A] P */
-static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
+static void w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
 {
 	u16* data = (u16 *)sd->gspca_dev.usb_buf;
-	int ret = 0;
 
 	data[0] = 0x082f | ((sd->sensor_addr & 0x80) ? 0x1500 : 0x0);
 	data[0] |= (sd->sensor_addr & 0x40) ? 0x4000 : 0x0;
@@ -276,7 +259,7 @@ static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
 	data[3] = 0x1d20 | ((sd->sensor_addr & 0x02) ? 0x0001 : 0x0);
 	data[3] |= (sd->sensor_addr & 0x01) ? 0x0054 : 0x0;
 
-	ret += w9968cf_write_fsb(sd, data);
+	w9968cf_write_fsb(sd, data);
 
 	data[0] = 0x8208 | ((reg & 0x80) ? 0x0015 : 0x0);
 	data[0] |= (reg & 0x40) ? 0x0540 : 0x0;
@@ -290,7 +273,7 @@ static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
 	data[2] |= (reg & 0x01) ? 0x5400 : 0x0;
 	data[3] = 0x001d;
 
-	ret += w9968cf_write_fsb(sd, data);
+	w9968cf_write_fsb(sd, data);
 
 	data[0] = 0x8208 | ((value & 0x80) ? 0x0015 : 0x0);
 	data[0] |= (value & 0x40) ? 0x0540 : 0x0;
@@ -304,14 +287,9 @@ static int w9968cf_i2c_w(struct sd *sd, u8 reg, u8 value)
 	data[2] |= (value & 0x01) ? 0x5400 : 0x0;
 	data[3] = 0xfe1d;
 
-	ret += w9968cf_write_fsb(sd, data);
+	w9968cf_write_fsb(sd, data);
 
-	if (!ret)
-		PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
-	else
-		PDEBUG(D_ERR, "i2c 0x%02x -> [0x%02x] failed", value, reg);
-
-	return ret;
+	PDEBUG(D_USBO, "i2c 0x%02x -> [0x%02x]", value, reg);
 }
 
 /* SMBus protocol: S Addr Wr [A] Subaddr [A] P S Addr+1 Rd [A] [Value] NA P */
@@ -321,28 +299,28 @@ static int w9968cf_i2c_r(struct sd *sd, u8 reg)
 	u8 value;
 
 	/* Fast serial bus data control disable */
-	ret += w9968cf_write_sb(sd, 0x0013); /* don't change ! */
-
-	ret += w9968cf_smbus_start(sd);
-	ret += w9968cf_smbus_write_byte(sd, sd->sensor_addr);
-	ret += w9968cf_smbus_read_ack(sd);
-	ret += w9968cf_smbus_write_byte(sd, reg);
-	ret += w9968cf_smbus_read_ack(sd);
-	ret += w9968cf_smbus_stop(sd);
-	ret += w9968cf_smbus_start(sd);
-	ret += w9968cf_smbus_write_byte(sd, sd->sensor_addr + 1);
-	ret += w9968cf_smbus_read_ack(sd);
-	ret += w9968cf_smbus_read_byte(sd, &value);
+	w9968cf_write_sb(sd, 0x0013); /* don't change ! */
+
+	w9968cf_smbus_start(sd);
+	w9968cf_smbus_write_byte(sd, sd->sensor_addr);
+	w9968cf_smbus_read_ack(sd);
+	w9968cf_smbus_write_byte(sd, reg);
+	w9968cf_smbus_read_ack(sd);
+	w9968cf_smbus_stop(sd);
+	w9968cf_smbus_start(sd);
+	w9968cf_smbus_write_byte(sd, sd->sensor_addr + 1);
+	w9968cf_smbus_read_ack(sd);
+	w9968cf_smbus_read_byte(sd, &value);
 	/* signal we don't want to read anymore, the v4l1 driver used to
 	   send an ack here which is very wrong! (and then fixed
 	   the issues this gave by retrying reads) */
-	ret += w9968cf_smbus_write_nack(sd);
-	ret += w9968cf_smbus_stop(sd);
+	w9968cf_smbus_write_nack(sd);
+	w9968cf_smbus_stop(sd);
 
 	/* Fast serial bus data control re-enable */
-	ret += w9968cf_write_sb(sd, 0x0030);
+	w9968cf_write_sb(sd, 0x0030);
 
-	if (!ret) {
+	if (sd->gspca_dev.usb_err >= 0) {
 		ret = value;
 		PDEBUG(D_USBI, "i2c [0x%02X] -> 0x%02X", reg, value);
 	} else
@@ -351,79 +329,68 @@ static int w9968cf_i2c_r(struct sd *sd, u8 reg)
 	return ret;
 }
 
-
 /*--------------------------------------------------------------------------
   Turn on the LED on some webcams. A beep should be heard too.
   Return 0 on success, a negative number otherwise.
   --------------------------------------------------------------------------*/
-static int w9968cf_configure(struct sd *sd)
+static void w9968cf_configure(struct sd *sd)
 {
-	int ret = 0;
-
-	ret += reg_w(sd, 0x00, 0xff00); /* power-down */
-	ret += reg_w(sd, 0x00, 0xbf17); /* reset everything */
-	ret += reg_w(sd, 0x00, 0xbf10); /* normal operation */
-	ret += reg_w(sd, 0x01, 0x0010); /* serial bus, SDS high */
-	ret += reg_w(sd, 0x01, 0x0000); /* serial bus, SDS low */
-	ret += reg_w(sd, 0x01, 0x0010); /* ..high 'beep-beep' */
-	ret += reg_w(sd, 0x01, 0x0030); /* Set sda scl to FSB mode */
-
-	if (ret)
-		PDEBUG(D_ERR, "Couldn't turn on the LED");
+	reg_w(sd, 0x00, 0xff00); /* power-down */
+	reg_w(sd, 0x00, 0xbf17); /* reset everything */
+	reg_w(sd, 0x00, 0xbf10); /* normal operation */
+	reg_w(sd, 0x01, 0x0010); /* serial bus, SDS high */
+	reg_w(sd, 0x01, 0x0000); /* serial bus, SDS low */
+	reg_w(sd, 0x01, 0x0010); /* ..high 'beep-beep' */
+	reg_w(sd, 0x01, 0x0030); /* Set sda scl to FSB mode */
 
 	sd->stopped = 1;
-
-	return ret;
 }
 
-static int w9968cf_init(struct sd *sd)
+static void w9968cf_init(struct sd *sd)
 {
-	int ret = 0;
 	unsigned long hw_bufsize = sd->sif ? (352 * 288 * 2) : (640 * 480 * 2),
 		      y0 = 0x0000,
-		      u0 = y0 + hw_bufsize/2,
-		      v0 = u0 + hw_bufsize/4,
-		      y1 = v0 + hw_bufsize/4,
-		      u1 = y1 + hw_bufsize/2,
-		      v1 = u1 + hw_bufsize/4;
-
-	ret += reg_w(sd, 0x00, 0xff00); /* power off */
-	ret += reg_w(sd, 0x00, 0xbf10); /* power on */
-
-	ret += reg_w(sd, 0x03, 0x405d); /* DRAM timings */
-	ret += reg_w(sd, 0x04, 0x0030); /* SDRAM timings */
-
-	ret += reg_w(sd, 0x20, y0 & 0xffff); /* Y buf.0, low */
-	ret += reg_w(sd, 0x21, y0 >> 16);    /* Y buf.0, high */
-	ret += reg_w(sd, 0x24, u0 & 0xffff); /* U buf.0, low */
-	ret += reg_w(sd, 0x25, u0 >> 16);    /* U buf.0, high */
-	ret += reg_w(sd, 0x28, v0 & 0xffff); /* V buf.0, low */
-	ret += reg_w(sd, 0x29, v0 >> 16);    /* V buf.0, high */
-
-	ret += reg_w(sd, 0x22, y1 & 0xffff); /* Y buf.1, low */
-	ret += reg_w(sd, 0x23, y1 >> 16);    /* Y buf.1, high */
-	ret += reg_w(sd, 0x26, u1 & 0xffff); /* U buf.1, low */
-	ret += reg_w(sd, 0x27, u1 >> 16);    /* U buf.1, high */
-	ret += reg_w(sd, 0x2a, v1 & 0xffff); /* V buf.1, low */
-	ret += reg_w(sd, 0x2b, v1 >> 16);    /* V buf.1, high */
-
-	ret += reg_w(sd, 0x32, y1 & 0xffff); /* JPEG buf 0 low */
-	ret += reg_w(sd, 0x33, y1 >> 16);    /* JPEG buf 0 high */
-
-	ret += reg_w(sd, 0x34, y1 & 0xffff); /* JPEG buf 1 low */
-	ret += reg_w(sd, 0x35, y1 >> 16);    /* JPEG bug 1 high */
-
-	ret += reg_w(sd, 0x36, 0x0000);/* JPEG restart interval */
-	ret += reg_w(sd, 0x37, 0x0804);/*JPEG VLE FIFO threshold*/
-	ret += reg_w(sd, 0x38, 0x0000);/* disable hw up-scaling */
-	ret += reg_w(sd, 0x3f, 0x0000); /* JPEG/MCTL test data */
-
-	return ret;
+		      u0 = y0 + hw_bufsize / 2,
+		      v0 = u0 + hw_bufsize / 4,
+		      y1 = v0 + hw_bufsize / 4,
+		      u1 = y1 + hw_bufsize / 2,
+		      v1 = u1 + hw_bufsize / 4;
+
+	reg_w(sd, 0x00, 0xff00); /* power off */
+	reg_w(sd, 0x00, 0xbf10); /* power on */
+
+	reg_w(sd, 0x03, 0x405d); /* DRAM timings */
+	reg_w(sd, 0x04, 0x0030); /* SDRAM timings */
+
+	reg_w(sd, 0x20, y0 & 0xffff); /* Y buf.0, low */
+	reg_w(sd, 0x21, y0 >> 16);    /* Y buf.0, high */
+	reg_w(sd, 0x24, u0 & 0xffff); /* U buf.0, low */
+	reg_w(sd, 0x25, u0 >> 16);    /* U buf.0, high */
+	reg_w(sd, 0x28, v0 & 0xffff); /* V buf.0, low */
+	reg_w(sd, 0x29, v0 >> 16);    /* V buf.0, high */
+
+	reg_w(sd, 0x22, y1 & 0xffff); /* Y buf.1, low */
+	reg_w(sd, 0x23, y1 >> 16);    /* Y buf.1, high */
+	reg_w(sd, 0x26, u1 & 0xffff); /* U buf.1, low */
+	reg_w(sd, 0x27, u1 >> 16);    /* U buf.1, high */
+	reg_w(sd, 0x2a, v1 & 0xffff); /* V buf.1, low */
+	reg_w(sd, 0x2b, v1 >> 16);    /* V buf.1, high */
+
+	reg_w(sd, 0x32, y1 & 0xffff); /* JPEG buf 0 low */
+	reg_w(sd, 0x33, y1 >> 16);    /* JPEG buf 0 high */
+
+	reg_w(sd, 0x34, y1 & 0xffff); /* JPEG buf 1 low */
+	reg_w(sd, 0x35, y1 >> 16);    /* JPEG bug 1 high */
+
+	reg_w(sd, 0x36, 0x0000);/* JPEG restart interval */
+	reg_w(sd, 0x37, 0x0804);/*JPEG VLE FIFO threshold*/
+	reg_w(sd, 0x38, 0x0000);/* disable hw up-scaling */
+	reg_w(sd, 0x3f, 0x0000); /* JPEG/MCTL test data */
 }
 
-static int w9968cf_set_crop_window(struct sd *sd)
+static void w9968cf_set_crop_window(struct sd *sd)
 {
-	int ret = 0, start_cropx, start_cropy,  x, y, fw, fh, cw, ch,
+	int start_cropx, start_cropy,  x, y, fw, fh, cw, ch,
 	    max_width, max_height;
 
 	if (sd->sif) {
@@ -456,8 +423,8 @@ static int w9968cf_set_crop_window(struct sd *sd)
 	fw = SC(sd->gspca_dev.width) / max_width;
 	fh = SC(sd->gspca_dev.height) / max_height;
 
-	cw = (fw >= fh) ? max_width : SC(sd->gspca_dev.width)/fh;
-	ch = (fw >= fh) ? SC(sd->gspca_dev.height)/fw : max_height;
+	cw = (fw >= fh) ? max_width : SC(sd->gspca_dev.width) / fh;
+	ch = (fw >= fh) ? SC(sd->gspca_dev.height) / fw : max_height;
 
 	sd->sensor_width = max_width;
 	sd->sensor_height = max_height;
@@ -465,42 +432,40 @@ static int w9968cf_set_crop_window(struct sd *sd)
 	x = (max_width - cw) / 2;
 	y = (max_height - ch) / 2;
 
-	ret += reg_w(sd, 0x10, start_cropx + x);
-	ret += reg_w(sd, 0x11, start_cropy + y);
-	ret += reg_w(sd, 0x12, start_cropx + x + cw);
-	ret += reg_w(sd, 0x13, start_cropy + y + ch);
-
-	return ret;
+	reg_w(sd, 0x10, start_cropx + x);
+	reg_w(sd, 0x11, start_cropy + y);
+	reg_w(sd, 0x12, start_cropx + x + cw);
+	reg_w(sd, 0x13, start_cropy + y + ch);
 }
 
-static int w9968cf_mode_init_regs(struct sd *sd)
+static void w9968cf_mode_init_regs(struct sd *sd)
 {
-	int ret = 0, val, vs_polarity, hs_polarity;
+	int val, vs_polarity, hs_polarity;
 
-	ret += w9968cf_set_crop_window(sd);
+	w9968cf_set_crop_window(sd);
 
-	ret += reg_w(sd, 0x14, sd->gspca_dev.width);
-	ret += reg_w(sd, 0x15, sd->gspca_dev.height);
+	reg_w(sd, 0x14, sd->gspca_dev.width);
+	reg_w(sd, 0x15, sd->gspca_dev.height);
 
 	/* JPEG width & height */
-	ret += reg_w(sd, 0x30, sd->gspca_dev.width);
-	ret += reg_w(sd, 0x31, sd->gspca_dev.height);
+	reg_w(sd, 0x30, sd->gspca_dev.width);
+	reg_w(sd, 0x31, sd->gspca_dev.height);
 
 	/* Y & UV frame buffer strides (in WORD) */
 	if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
 	    V4L2_PIX_FMT_JPEG) {
-		ret += reg_w(sd, 0x2c, sd->gspca_dev.width/2);
-		ret += reg_w(sd, 0x2d, sd->gspca_dev.width/4);
+		reg_w(sd, 0x2c, sd->gspca_dev.width / 2);
+		reg_w(sd, 0x2d, sd->gspca_dev.width / 4);
 	} else
-		ret += reg_w(sd, 0x2c, sd->gspca_dev.width);
+		reg_w(sd, 0x2c, sd->gspca_dev.width);
 
-	ret += reg_w(sd, 0x00, 0xbf17); /* reset everything */
-	ret += reg_w(sd, 0x00, 0xbf10); /* normal operation */
+	reg_w(sd, 0x00, 0xbf17); /* reset everything */
+	reg_w(sd, 0x00, 0xbf10); /* normal operation */
 
 	/* Transfer size in WORDS (for UYVY format only) */
 	val = sd->gspca_dev.width * sd->gspca_dev.height;
-	ret += reg_w(sd, 0x3d, val & 0xffff); /* low bits */
-	ret += reg_w(sd, 0x3e, val >> 16);    /* high bits */
+	reg_w(sd, 0x3d, val & 0xffff); /* low bits */
+	reg_w(sd, 0x3e, val >> 16);    /* high bits */
 
 	if (w9968cf_vga_mode[sd->gspca_dev.curr_mode].pixelformat ==
 	    V4L2_PIX_FMT_JPEG) {
@@ -508,7 +473,7 @@ static int w9968cf_mode_init_regs(struct sd *sd)
 		jpeg_define(sd->jpeg_hdr, sd->gspca_dev.height,
 			    sd->gspca_dev.width, 0x22); /* JPEG 420 */
 		jpeg_set_qual(sd->jpeg_hdr, sd->quality);
-		ret += w9968cf_upload_quantizationtables(sd);
+		w9968cf_upload_quantizationtables(sd);
 	}
 
 	/* Video Capture Control Register */
@@ -540,19 +505,15 @@ static int w9968cf_mode_init_regs(struct sd *sd)
 
 	val |= 0x8000; /* capt. enable */
 
-	ret += reg_w(sd, 0x16, val);
+	reg_w(sd, 0x16, val);
 
 	sd->gspca_dev.empty_packet = 0;
-
-	return ret;
 }
 
 static void w9968cf_stop0(struct sd *sd)
 {
-	if (sd->gspca_dev.present) {
-		reg_w(sd, 0x39, 0x0000); /* disable JPEG encoder */
-		reg_w(sd, 0x16, 0x0000); /* stop video capture */
-	}
+	reg_w(sd, 0x39, 0x0000); /* disable JPEG encoder */
+	reg_w(sd, 0x16, 0x0000); /* stop video capture */
 }
 
 /* The w9968cf docs say that a 0 sized packet means EOF (and also SOF
diff --git a/drivers/media/video/gspca/xirlink_cit.c b/drivers/media/video/gspca/xirlink_cit.c
index 8715577bc2d..5b5039a0203 100644
--- a/drivers/media/video/gspca/xirlink_cit.c
+++ b/drivers/media/video/gspca/xirlink_cit.c
@@ -29,6 +29,7 @@
 
 #define MODULE_NAME "xirlink-cit"
 
+#include <linux/input.h>
 #include "gspca.h"
 
 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
@@ -58,6 +59,7 @@ struct sd {
 #define CIT_MODEL4 4
 #define CIT_IBM_NETCAM_PRO 5
 	u8 input_index;
+	u8 button_state;
 	u8 stop_on_control_change;
 	u8 sof_read;
 	u8 sof_len;
@@ -185,60 +187,60 @@ static const struct ctrl sd_ctrls[] = {
 static const struct v4l2_pix_format cif_yuv_mode[] = {
 	{176, 144, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144 * 3 / 2,
+		.sizeimage = 176 * 144 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{352, 288, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 352,
-		.sizeimage = 352 * 288 * 3 / 2,
+		.sizeimage = 352 * 288 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 };
 
 static const struct v4l2_pix_format vga_yuv_mode[] = {
 	{160, 120, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 3 / 2,
+		.sizeimage = 160 * 120 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{320, 240, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240 * 3 / 2,
+		.sizeimage = 320 * 240 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{640, 480, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 640,
-		.sizeimage = 640 * 480 * 3 / 2,
+		.sizeimage = 640 * 480 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 };
 
 static const struct v4l2_pix_format model0_mode[] = {
 	{160, 120, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 3 / 2,
+		.sizeimage = 160 * 120 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{176, 144, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144 * 3 / 2,
+		.sizeimage = 176 * 144 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{320, 240, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240 * 3 / 2,
+		.sizeimage = 320 * 240 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 };
 
 static const struct v4l2_pix_format model2_mode[] = {
 	{160, 120, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 3 / 2,
+		.sizeimage = 160 * 120 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{176, 144, V4L2_PIX_FMT_CIT_YYVYUY, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144 * 3 / 2,
+		.sizeimage = 176 * 144 * 3 / 2 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{320, 240, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240,
+		.sizeimage = 320 * 240 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 	{352, 288, V4L2_PIX_FMT_SGRBG8, V4L2_FIELD_NONE,
 		.bytesperline = 352,
-		.sizeimage = 352 * 288,
+		.sizeimage = 352 * 288 + 4,
 		.colorspace = V4L2_COLORSPACE_SRGB},
 };
 
@@ -804,7 +806,7 @@ static int cit_write_reg(struct gspca_dev *gspca_dev, u16 value, u16 index)
 	return 0;
 }
 
-static int cit_read_reg(struct gspca_dev *gspca_dev, u16 index)
+static int cit_read_reg(struct gspca_dev *gspca_dev, u16 index, int verbose)
 {
 	struct usb_device *udev = gspca_dev->dev;
 	__u8 *buf = gspca_dev->usb_buf;
@@ -819,10 +821,8 @@ static int cit_read_reg(struct gspca_dev *gspca_dev, u16 index)
 		return res;
 	}
 
-	PDEBUG(D_PROBE,
-	       "Register %04x value: %02x %02x %02x %02x %02x %02x %02x %02x",
-	       index,
-	       buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
+	if (verbose)
+		PDEBUG(D_PROBE, "Register %04x value: %02x", index, buf[0]);
 
 	return 0;
 }
@@ -907,7 +907,7 @@ static void cit_Packet_Format1(struct gspca_dev *gspca_dev, u16 fkey, u16 val)
 	cit_send_x_00_05(gspca_dev, 0x0089);
 	cit_send_x_00(gspca_dev, fkey);
 	cit_send_00_04_06(gspca_dev);
-	cit_read_reg(gspca_dev, 0x0126);
+	cit_read_reg(gspca_dev, 0x0126, 0);
 	cit_send_FF_04_02(gspca_dev);
 }
 
@@ -1074,12 +1074,12 @@ static int cit_init_model0(struct gspca_dev *gspca_dev)
 
 static int cit_init_ibm_netcam_pro(struct gspca_dev *gspca_dev)
 {
-	cit_read_reg(gspca_dev, 0x128);
+	cit_read_reg(gspca_dev, 0x128, 1);
 	cit_write_reg(gspca_dev, 0x0003, 0x0133);
 	cit_write_reg(gspca_dev, 0x0000, 0x0117);
 	cit_write_reg(gspca_dev, 0x0008, 0x0123);
 	cit_write_reg(gspca_dev, 0x0000, 0x0100);
-	cit_read_reg(gspca_dev, 0x0116);
+	cit_read_reg(gspca_dev, 0x0116, 0);
 	cit_write_reg(gspca_dev, 0x0060, 0x0116);
 	cit_write_reg(gspca_dev, 0x0002, 0x0112);
 	cit_write_reg(gspca_dev, 0x0000, 0x0133);
@@ -1098,7 +1098,7 @@ static int cit_init_ibm_netcam_pro(struct gspca_dev *gspca_dev)
 	cit_write_reg(gspca_dev, 0x00ff, 0x0130);
 	cit_write_reg(gspca_dev, 0xcd41, 0x0124);
 	cit_write_reg(gspca_dev, 0xfffa, 0x0124);
-	cit_read_reg(gspca_dev, 0x0126);
+	cit_read_reg(gspca_dev, 0x0126, 1);
 
 	cit_model3_Packet1(gspca_dev, 0x0000, 0x0000);
 	cit_model3_Packet1(gspca_dev, 0x0000, 0x0001);
@@ -1557,18 +1557,20 @@ static int cit_restart_stream(struct gspca_dev *gspca_dev)
 	switch (sd->model) {
 	case CIT_MODEL0:
 	case CIT_MODEL1:
-	case CIT_MODEL3:
-	case CIT_IBM_NETCAM_PRO:
 		cit_write_reg(gspca_dev, 0x0001, 0x0114);
 		/* Fall through */
 	case CIT_MODEL2:
 	case CIT_MODEL4:
 		cit_write_reg(gspca_dev, 0x00c0, 0x010c); /* Go! */
 		usb_clear_halt(gspca_dev->dev, gspca_dev->urb[0]->pipe);
-		/* This happens repeatedly while streaming with the ibm netcam
-		   pro and the ibmcam driver did it for model3 after changing
-		   settings, but it does not seem to have any effect. */
-		/* cit_write_reg(gspca_dev, 0x0001, 0x0113); */
+		break;
+	case CIT_MODEL3:
+	case CIT_IBM_NETCAM_PRO:
+		cit_write_reg(gspca_dev, 0x0001, 0x0114);
+		cit_write_reg(gspca_dev, 0x00c0, 0x010c); /* Go! */
+		usb_clear_halt(gspca_dev->dev, gspca_dev->urb[0]->pipe);
+		/* Clear button events from while we were not streaming */
+		cit_write_reg(gspca_dev, 0x0001, 0x0113);
 		break;
 	}
 
@@ -1680,23 +1682,23 @@ static int cit_start_model1(struct gspca_dev *gspca_dev)
 	if (clock_div < 0)
 		return clock_div;
 
-	cit_read_reg(gspca_dev, 0x0128);
-	cit_read_reg(gspca_dev, 0x0100);
+	cit_read_reg(gspca_dev, 0x0128, 1);
+	cit_read_reg(gspca_dev, 0x0100, 0);
 	cit_write_reg(gspca_dev, 0x01, 0x0100);	/* LED On  */
-	cit_read_reg(gspca_dev, 0x0100);
+	cit_read_reg(gspca_dev, 0x0100, 0);
 	cit_write_reg(gspca_dev, 0x81, 0x0100);	/* LED Off */
-	cit_read_reg(gspca_dev, 0x0100);
+	cit_read_reg(gspca_dev, 0x0100, 0);
 	cit_write_reg(gspca_dev, 0x01, 0x0100);	/* LED On  */
 	cit_write_reg(gspca_dev, 0x01, 0x0108);
 
 	cit_write_reg(gspca_dev, 0x03, 0x0112);
-	cit_read_reg(gspca_dev, 0x0115);
+	cit_read_reg(gspca_dev, 0x0115, 0);
 	cit_write_reg(gspca_dev, 0x06, 0x0115);
-	cit_read_reg(gspca_dev, 0x0116);
+	cit_read_reg(gspca_dev, 0x0116, 0);
 	cit_write_reg(gspca_dev, 0x44, 0x0116);
-	cit_read_reg(gspca_dev, 0x0116);
+	cit_read_reg(gspca_dev, 0x0116, 0);
 	cit_write_reg(gspca_dev, 0x40, 0x0116);
-	cit_read_reg(gspca_dev, 0x0115);
+	cit_read_reg(gspca_dev, 0x0115, 0);
 	cit_write_reg(gspca_dev, 0x0e, 0x0115);
 	cit_write_reg(gspca_dev, 0x19, 0x012c);
 
@@ -1878,7 +1880,7 @@ static int cit_start_model2(struct gspca_dev *gspca_dev)
 	int clock_div = 0;
 
 	cit_write_reg(gspca_dev, 0x0000, 0x0100);	/* LED on */
-	cit_read_reg(gspca_dev, 0x0116);
+	cit_read_reg(gspca_dev, 0x0116, 0);
 	cit_write_reg(gspca_dev, 0x0060, 0x0116);
 	cit_write_reg(gspca_dev, 0x0002, 0x0112);
 	cit_write_reg(gspca_dev, 0x00bc, 0x012c);
@@ -2070,10 +2072,10 @@ static int cit_start_model3(struct gspca_dev *gspca_dev)
 
 	/* HDG not in ibmcam driver, added to see if it helps with
 	   auto-detecting between model3 and ibm netcamera pro */
-	cit_read_reg(gspca_dev, 0x128);
+	cit_read_reg(gspca_dev, 0x128, 1);
 
 	cit_write_reg(gspca_dev, 0x0000, 0x0100);
-	cit_read_reg(gspca_dev, 0x0116);
+	cit_read_reg(gspca_dev, 0x0116, 0);
 	cit_write_reg(gspca_dev, 0x0060, 0x0116);
 	cit_write_reg(gspca_dev, 0x0002, 0x0112);
 	cit_write_reg(gspca_dev, 0x0000, 0x0123);
@@ -2083,7 +2085,7 @@ static int cit_start_model3(struct gspca_dev *gspca_dev)
 	cit_write_reg(gspca_dev, 0x0060, 0x0116);
 	cit_write_reg(gspca_dev, 0x0002, 0x0115);
 	cit_write_reg(gspca_dev, 0x0003, 0x0115);
-	cit_read_reg(gspca_dev, 0x0115);
+	cit_read_reg(gspca_dev, 0x0115, 0);
 	cit_write_reg(gspca_dev, 0x000b, 0x0115);
 
 	/* TESTME HDG not in ibmcam driver, added to see if it helps with
@@ -2096,7 +2098,7 @@ static int cit_start_model3(struct gspca_dev *gspca_dev)
 		cit_write_reg(gspca_dev, 0x00ff, 0x0130);
 		cit_write_reg(gspca_dev, 0xcd41, 0x0124);
 		cit_write_reg(gspca_dev, 0xfffa, 0x0124);
-		cit_read_reg(gspca_dev, 0x0126);
+		cit_read_reg(gspca_dev, 0x0126, 1);
 	}
 
 	cit_model3_Packet1(gspca_dev, 0x000a, 0x0040);
@@ -2293,7 +2295,7 @@ static int cit_start_model3(struct gspca_dev *gspca_dev)
 	if (rca_input) {
 		for (i = 0; i < ARRAY_SIZE(rca_initdata); i++) {
 			if (rca_initdata[i][0])
-				cit_read_reg(gspca_dev, rca_initdata[i][2]);
+				cit_read_reg(gspca_dev, rca_initdata[i][2], 0);
 			else
 				cit_write_reg(gspca_dev, rca_initdata[i][1],
 					      rca_initdata[i][2]);
@@ -2712,7 +2714,7 @@ static int cit_start_ibm_netcam_pro(struct gspca_dev *gspca_dev)
 	if (rca_input) {
 		for (i = 0; i < ARRAY_SIZE(rca_initdata); i++) {
 			if (rca_initdata[i][0])
-				cit_read_reg(gspca_dev, rca_initdata[i][2]);
+				cit_read_reg(gspca_dev, rca_initdata[i][2], 0);
 			else
 				cit_write_reg(gspca_dev, rca_initdata[i][1],
 					      rca_initdata[i][2]);
@@ -2769,16 +2771,55 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
+static int sd_isoc_init(struct gspca_dev *gspca_dev)
+{
+	struct usb_host_interface *alt;
+	int max_packet_size;
+
+	switch (gspca_dev->width) {
+	case 160:
+		max_packet_size = 450;
+		break;
+	case 176:
+		max_packet_size = 600;
+		break;
+	default:
+		max_packet_size = 1022;
+		break;
+	}
+
+	/* Start isoc bandwidth "negotiation" at max isoc bandwidth */
+	alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1];
+	alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(max_packet_size);
+
+	return 0;
+}
+
 static int sd_isoc_nego(struct gspca_dev *gspca_dev)
 {
-	int ret, packet_size;
+	int ret, packet_size, min_packet_size;
 	struct usb_host_interface *alt;
 
+	switch (gspca_dev->width) {
+	case 160:
+		min_packet_size = 200;
+		break;
+	case 176:
+		min_packet_size = 266;
+		break;
+	default:
+		min_packet_size = 400;
+		break;
+	}
+
 	alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1];
 	packet_size = le16_to_cpu(alt->endpoint[0].desc.wMaxPacketSize);
-	packet_size -= 100;
-	if (packet_size < 300)
+	if (packet_size <= min_packet_size)
 		return -EIO;
+
+	packet_size -= 100;
+	if (packet_size < min_packet_size)
+		packet_size = min_packet_size;
 	alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(packet_size);
 
 	ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, 1);
@@ -2796,15 +2837,12 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_host_interface *alt;
 
 	/* We cannot use gspca_dev->present here as that is not set when
 	   sd_init gets called and we get called from sd_init */
 	if (!gspca_dev->dev)
 		return;
 
-	alt = &gspca_dev->dev->config->intf_cache[0]->altsetting[1];
-
 	switch (sd->model) {
 	case CIT_MODEL0:
 		/* HDG windows does this, but it causes the cams autogain to
@@ -2815,7 +2853,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 		break;
 	case CIT_MODEL1:
 		cit_send_FF_04_02(gspca_dev);
-		cit_read_reg(gspca_dev, 0x0100);
+		cit_read_reg(gspca_dev, 0x0100, 0);
 		cit_write_reg(gspca_dev, 0x81, 0x0100);	/* LED Off */
 		break;
 	case CIT_MODEL2:
@@ -2834,9 +2872,9 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	case CIT_MODEL3:
 		cit_write_reg(gspca_dev, 0x0006, 0x012c);
 		cit_model3_Packet1(gspca_dev, 0x0046, 0x0000);
-		cit_read_reg(gspca_dev, 0x0116);
+		cit_read_reg(gspca_dev, 0x0116, 0);
 		cit_write_reg(gspca_dev, 0x0064, 0x0116);
-		cit_read_reg(gspca_dev, 0x0115);
+		cit_read_reg(gspca_dev, 0x0115, 0);
 		cit_write_reg(gspca_dev, 0x0003, 0x0115);
 		cit_write_reg(gspca_dev, 0x0008, 0x0123);
 		cit_write_reg(gspca_dev, 0x0000, 0x0117);
@@ -2859,12 +2897,17 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 		   restarting the stream after this */
 		/* cit_write_reg(gspca_dev, 0x0000, 0x0112); */
 		cit_write_reg(gspca_dev, 0x00c0, 0x0100);
-
-		/* Start isoc bandwidth "negotiation" at max isoc bandwith
-		   next stream start */
-		alt->endpoint[0].desc.wMaxPacketSize = cpu_to_le16(1022);
 		break;
 	}
+
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	/* If the last button state is pressed, release it now! */
+	if (sd->button_state) {
+		input_report_key(gspca_dev->input_dev, KEY_CAMERA, 0);
+		input_sync(gspca_dev->input_dev);
+		sd->button_state = 0;
+	}
+#endif
 }
 
 static u8 *cit_find_sof(struct gspca_dev *gspca_dev, u8 *data, int len)
@@ -3158,6 +3201,38 @@ static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+static void cit_check_button(struct gspca_dev *gspca_dev)
+{
+	int new_button_state;
+	struct sd *sd = (struct sd *)gspca_dev;
+
+	switch (sd->model) {
+	case CIT_MODEL3:
+	case CIT_IBM_NETCAM_PRO:
+		break;
+	default: /* TEST ME unknown if this works on other models too */
+		return;
+	}
+
+	/* Read the button state */
+	cit_read_reg(gspca_dev, 0x0113, 0);
+	new_button_state = !gspca_dev->usb_buf[0];
+
+	/* Tell the cam we've seen the button press, notice that this
+	   is a nop (iow the cam keeps reporting pressed) until the
+	   button is actually released. */
+	if (new_button_state)
+		cit_write_reg(gspca_dev, 0x01, 0x0113);
+
+	if (sd->button_state != new_button_state) {
+		input_report_key(gspca_dev->input_dev, KEY_CAMERA,
+				 new_button_state);
+		input_sync(gspca_dev->input_dev);
+		sd->button_state = new_button_state;
+	}
+}
+#endif
 
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
@@ -3170,6 +3245,10 @@ static const struct sd_desc sd_desc = {
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
 	.pkt_scan = sd_pkt_scan,
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	.dq_callback = cit_check_button,
+	.other_input = 1,
+#endif
 };
 
 static const struct sd_desc sd_desc_isoc_nego = {
@@ -3179,10 +3258,15 @@ static const struct sd_desc sd_desc_isoc_nego = {
 	.config = sd_config,
 	.init = sd_init,
 	.start = sd_start,
+	.isoc_init = sd_isoc_init,
 	.isoc_nego = sd_isoc_nego,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
 	.pkt_scan = sd_pkt_scan,
+#if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
+	.dq_callback = cit_check_button,
+	.other_input = 1,
+#endif
 };
 
 /* -- module initialisation -- */
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index c7e1970ca28..14b85d48316 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -35,16 +35,23 @@ static int force_sensor = -1;
 #define QUANT_VAL 1		/* quantization table */
 #include "zc3xx-reg.h"
 
+/* controls */
+enum e_ctrl {
+	BRIGHTNESS,
+	CONTRAST,
+	GAMMA,
+	AUTOGAIN,
+	LIGHTFREQ,
+	SHARPNESS,
+	NCTRLS		/* number of controls */
+};
+
 /* specific webcam descriptor */
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 
-	u8 brightness;
-	u8 contrast;
-	u8 gamma;
-	u8 autogain;
-	u8 lightfreq;
-	u8 sharpness;
+	struct gspca_ctrl ctrls[NCTRLS];
+
 	u8 quality;			/* image quality */
 #define QUALITY_MIN 50
 #define QUALITY_MAX 80
@@ -64,6 +71,7 @@ enum sensors {
 	SENSOR_ADCM2700,
 	SENSOR_CS2102,
 	SENSOR_CS2102K,
+	SENSOR_GC0303,
 	SENSOR_GC0305,
 	SENSOR_HDCS2020b,
 	SENSOR_HV7131B,
@@ -79,26 +87,17 @@ enum sensors {
 	SENSOR_PB0330,
 	SENSOR_PO2030,
 	SENSOR_TAS5130C,
-	SENSOR_TAS5130C_VF0250,
 	SENSOR_MAX
 };
 
 /* V4L2 controls supported by the driver */
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setgamma(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getgamma(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
-
-static const struct ctrl sd_ctrls[] = {
-	{
+static void setcontrast(struct gspca_dev *gspca_dev);
+static void setautogain(struct gspca_dev *gspca_dev);
+static void setlightfreq(struct gspca_dev *gspca_dev);
+static void setsharpness(struct gspca_dev *gspca_dev);
+
+static const struct ctrl sd_ctrls[NCTRLS] = {
+[BRIGHTNESS] = {
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
@@ -106,13 +105,11 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
-#define BRIGHTNESS_DEF 128
-		.default_value = BRIGHTNESS_DEF,
+		.default_value = 128,
 	    },
-	    .set = sd_setbrightness,
-	    .get = sd_getbrightness,
+	    .set_control = setcontrast
 	},
-	{
+[CONTRAST] = {
 	    {
 		.id      = V4L2_CID_CONTRAST,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
@@ -120,13 +117,11 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
-#define CONTRAST_DEF 128
-		.default_value = CONTRAST_DEF,
+		.default_value = 128,
 	    },
-	    .set = sd_setcontrast,
-	    .get = sd_getcontrast,
+	    .set_control = setcontrast
 	},
-	{
+[GAMMA] = {
 	    {
 		.id      = V4L2_CID_GAMMA,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
@@ -136,10 +131,9 @@ static const struct ctrl sd_ctrls[] = {
 		.step    = 1,
 		.default_value = 4,
 	    },
-	    .set = sd_setgamma,
-	    .get = sd_getgamma,
+	    .set_control = setcontrast
 	},
-	{
+[AUTOGAIN] = {
 	    {
 		.id      = V4L2_CID_AUTOGAIN,
 		.type    = V4L2_CTRL_TYPE_BOOLEAN,
@@ -147,14 +141,11 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 1,
 		.step    = 1,
-#define AUTOGAIN_DEF 1
-		.default_value = AUTOGAIN_DEF,
+		.default_value = 1,
 	    },
-	    .set = sd_setautogain,
-	    .get = sd_getautogain,
+	    .set_control = setautogain
 	},
-#define LIGHTFREQ_IDX 4
-	{
+[LIGHTFREQ] = {
 	    {
 		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
 		.type    = V4L2_CTRL_TYPE_MENU,
@@ -162,13 +153,11 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 2,	/* 0: 0, 1: 50Hz, 2:60Hz */
 		.step    = 1,
-#define FREQ_DEF 0
-		.default_value = FREQ_DEF,
+		.default_value = 0,
 	    },
-	    .set = sd_setfreq,
-	    .get = sd_getfreq,
+	    .set_control = setlightfreq
 	},
-	{
+[SHARPNESS] = {
 	    {
 		.id	 = V4L2_CID_SHARPNESS,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
@@ -176,11 +165,9 @@ static const struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 3,
 		.step    = 1,
-#define SHARPNESS_DEF 2
-		.default_value = SHARPNESS_DEF,
+		.default_value = 2,
 	    },
-	    .set = sd_setsharpness,
-	    .get = sd_getsharpness,
+	    .set_control = setsharpness
 	},
 };
 
@@ -4499,7 +4486,7 @@ static const struct usb_action mt9v111_3_Initial[] = {
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},
 	{0xa0, 0x03, ZC3XX_R008_CLOCKSETTING},
 	{0xa0, 0x0a, ZC3XX_R010_CMOSSENSORSELECT},
-	{0xa0, 0x04, ZC3XX_R002_CLOCKSELECT},
+	{0xa0, 0x00, ZC3XX_R002_CLOCKSELECT},
 	{0xa0, 0x02, ZC3XX_R003_FRAMEWIDTHHIGH},
 	{0xa0, 0x80, ZC3XX_R004_FRAMEWIDTHLOW},
 	{0xa0, 0x01, ZC3XX_R005_FRAMEHEIGHTHIGH},
@@ -5406,7 +5393,7 @@ static const struct usb_action tas5130c_NoFlikerScale[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_InitialScale[] = {
+static const struct usb_action gc0303_InitialScale[] = {
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},		/* 00,00,01,cc, */
 	{0xa0, 0x02, ZC3XX_R008_CLOCKSETTING},		/* 00,08,02,cc, */
 	{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT},	/* 00,10,01,cc, */
@@ -5473,7 +5460,7 @@ static const struct usb_action tas5130c_vf0250_InitialScale[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_Initial[] = {
+static const struct usb_action gc0303_Initial[] = {
 	{0xa0, 0x01, ZC3XX_R000_SYSTEMCONTROL},		/* 00,00,01,cc, */
 	{0xa0, 0x02, ZC3XX_R008_CLOCKSETTING},		/* 00,08,02,cc, */
 	{0xa0, 0x01, ZC3XX_R010_CMOSSENSORSELECT},	/* 00,10,01,cc, */
@@ -5538,7 +5525,7 @@ static const struct usb_action tas5130c_vf0250_Initial[] = {
 	{0xa0, 0x65, ZC3XX_R118_BGAIN},		/* 01,18,65,cc */
 	{}
 };
-static const struct usb_action tas5130c_vf0250_50HZScale[] = {
+static const struct usb_action gc0303_50HZScale[] = {
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0001},		/* 00,83,01,aa */
 	{0xaa, 0x84, 0x00aa},		/* 00,84,aa,aa */
@@ -5562,7 +5549,7 @@ static const struct usb_action tas5130c_vf0250_50HZScale[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_50HZ[] = {
+static const struct usb_action gc0303_50HZ[] = {
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0003},		/* 00,83,03,aa */
 	{0xaa, 0x84, 0x0054},		/* 00,84,54,aa */
@@ -5586,7 +5573,7 @@ static const struct usb_action tas5130c_vf0250_50HZ[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_60HZScale[] = {
+static const struct usb_action gc0303_60HZScale[] = {
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0001},		/* 00,83,01,aa */
 	{0xaa, 0x84, 0x0062},		/* 00,84,62,aa */
@@ -5610,7 +5597,7 @@ static const struct usb_action tas5130c_vf0250_60HZScale[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_60HZ[] = {
+static const struct usb_action gc0303_60HZ[] = {
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0002},		/* 00,83,02,aa */
 	{0xaa, 0x84, 0x00c4},		/* 00,84,c4,aa */
@@ -5634,7 +5621,7 @@ static const struct usb_action tas5130c_vf0250_60HZ[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_NoFlikerScale[] = {
+static const struct usb_action gc0303_NoFlikerScale[] = {
 	{0xa0, 0x0c, ZC3XX_R100_OPERATIONMODE},		/* 01,00,0c,cc, */
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0000},		/* 00,83,00,aa */
@@ -5656,7 +5643,7 @@ static const struct usb_action tas5130c_vf0250_NoFlikerScale[] = {
 	{}
 };
 
-static const struct usb_action tas5130c_vf0250_NoFliker[] = {
+static const struct usb_action gc0303_NoFliker[] = {
 	{0xa0, 0x0c, ZC3XX_R100_OPERATIONMODE},		/* 01,00,0c,cc, */
 	{0xaa, 0x82, 0x0000},		/* 00,82,00,aa */
 	{0xaa, 0x83, 0x0000},		/* 00,83,00,aa */
@@ -5833,12 +5820,13 @@ static void setmatrix(struct gspca_dev *gspca_dev)
 		{0x60, 0xf0, 0xf0, 0xf0, 0x60, 0xf0, 0xf0, 0xf0, 0x60};
 	static const u8 tas5130c_matrix[9] =
 		{0x68, 0xec, 0xec, 0xec, 0x68, 0xec, 0xec, 0xec, 0x68};
-	static const u8 vf0250_matrix[9] =
+	static const u8 gc0303_matrix[9] =
 		{0x7b, 0xea, 0xea, 0xea, 0x7b, 0xea, 0xea, 0xea, 0x7b};
 	static const u8 *matrix_tb[SENSOR_MAX] = {
 		[SENSOR_ADCM2700] =	adcm2700_matrix,
 		[SENSOR_CS2102] =	ov7620_matrix,
 		[SENSOR_CS2102K] =	NULL,
+		[SENSOR_GC0303] =	gc0303_matrix,
 		[SENSOR_GC0305] =	gc0305_matrix,
 		[SENSOR_HDCS2020b] =	NULL,
 		[SENSOR_HV7131B] =	NULL,
@@ -5854,7 +5842,6 @@ static void setmatrix(struct gspca_dev *gspca_dev)
 		[SENSOR_PB0330] =	gc0305_matrix,
 		[SENSOR_PO2030] =	po2030_matrix,
 		[SENSOR_TAS5130C] =	tas5130c_matrix,
-		[SENSOR_TAS5130C_VF0250] = vf0250_matrix,
 	};
 
 	matrix = matrix_tb[sd->sensor];
@@ -5875,7 +5862,7 @@ static void setsharpness(struct gspca_dev *gspca_dev)
 		{0x10, 0x1e}
 	};
 
-	sharpness = sd->sharpness;
+	sharpness = sd->ctrls[SHARPNESS].val;
 	reg_w(gspca_dev, sharpness_tb[sharpness][0], 0x01c6);
 	reg_r(gspca_dev, 0x01c8);
 	reg_r(gspca_dev, 0x01c9);
@@ -5910,10 +5897,10 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		 0xe0, 0xeb, 0xf4, 0xff, 0xff, 0xff, 0xff, 0xff},
 	};
 
-	Tgamma = gamma_tb[sd->gamma - 1];
+	Tgamma = gamma_tb[sd->ctrls[GAMMA].val - 1];
 
-	contrast = ((int) sd->contrast - 128);		/* -128 / 127 */
-	brightness = ((int) sd->brightness - 128);	/* -128 / 92 */
+	contrast = ((int) sd->ctrls[CONTRAST].val - 128); /* -128 / 127 */
+	brightness = ((int) sd->ctrls[BRIGHTNESS].val - 128); /* -128 / 92 */
 	adj = 0;
 	gp1 = gp2 = 0;
 	for (i = 0; i < 16; i++) {
@@ -5994,6 +5981,10 @@ static void setlightfreq(struct gspca_dev *gspca_dev)
 		{cs2102_NoFliker, cs2102_NoFlikerScale,
 		 NULL, NULL, /* currently disabled */
 		 NULL, NULL},
+	[SENSOR_GC0303] =
+		{gc0303_NoFliker, gc0303_NoFlikerScale,
+		 gc0303_50HZ, gc0303_50HZScale,
+		 gc0303_60HZ, gc0303_60HZScale},
 	[SENSOR_GC0305] =
 		{gc0305_NoFliker, gc0305_NoFliker,
 		 gc0305_50HZ, gc0305_50HZ,
@@ -6054,14 +6045,10 @@ static void setlightfreq(struct gspca_dev *gspca_dev)
 		{tas5130c_NoFliker, tas5130c_NoFlikerScale,
 		 tas5130c_50HZ, tas5130c_50HZScale,
 		 tas5130c_60HZ, tas5130c_60HZScale},
-	[SENSOR_TAS5130C_VF0250] =
-		{tas5130c_vf0250_NoFliker, tas5130c_vf0250_NoFlikerScale,
-		 tas5130c_vf0250_50HZ, tas5130c_vf0250_50HZScale,
-		 tas5130c_vf0250_60HZ, tas5130c_vf0250_60HZScale},
 	};
 
-	i = sd->lightfreq * 2;
-	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	i = sd->ctrls[LIGHTFREQ].val * 2;
+	mode = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv;
 	if (mode)
 		i++;			/* 320x240 */
 	zc3_freq = freq_tb[sd->sensor][i];
@@ -6070,14 +6057,14 @@ static void setlightfreq(struct gspca_dev *gspca_dev)
 	usb_exchange(gspca_dev, zc3_freq);
 	switch (sd->sensor) {
 	case SENSOR_GC0305:
-		if (mode			/* if 320x240 */
-		    && sd->lightfreq == 1)	/* and 50Hz */
+		if (mode				/* if 320x240 */
+		    && sd->ctrls[LIGHTFREQ].val == 1)	/* and 50Hz */
 			reg_w(gspca_dev, 0x85, 0x018d);
 					/* win: 0x80, 0x018d */
 		break;
 	case SENSOR_OV7620:
-		if (!mode) {			/* if 640x480 */
-			if (sd->lightfreq != 0)	/* and 50 or 60 Hz */
+		if (!mode) {				/* if 640x480 */
+			if (sd->ctrls[LIGHTFREQ].val != 0) /* and filter */
 				reg_w(gspca_dev, 0x40, 0x0002);
 			else
 				reg_w(gspca_dev, 0x44, 0x0002);
@@ -6094,7 +6081,7 @@ static void setautogain(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	u8 autoval;
 
-	if (sd->autogain)
+	if (sd->ctrls[AUTOGAIN].val)
 		autoval = 0x42;
 	else
 		autoval = 0x02;
@@ -6330,8 +6317,8 @@ static int vga_3wr_probe(struct gspca_dev *gspca_dev)
 	retword = i2c_read(gspca_dev, 0x00);
 	if (retword != 0) {
 		PDEBUG(D_PROBE, "probe 3wr vga type %02x", retword);
-		if (retword == 0x0011)			/* VF0250 */
-			return 0x0250;
+		if (retword == 0x0011)			/* gc0303 */
+			return 0x0303;
 		if (retword == 0x0029)			/* gc0305 */
 			send_unknown(gspca_dev, SENSOR_GC0305);
 		return retword;
@@ -6392,7 +6379,7 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev)
 	switch (sd->sensor) {
 	case SENSOR_MC501CB:
 		return -1;		/* don't probe */
-	case SENSOR_TAS5130C_VF0250:
+	case SENSOR_GC0303:
 			/* may probe but with no write in reg 0x0010 */
 		return -1;		/* don't probe */
 	case SENSOR_PAS106:
@@ -6421,11 +6408,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	/* define some sensors from the vendor/product */
 	sd->sensor = id->driver_info;
 
-	sd->sharpness = SHARPNESS_DEF;
-	sd->brightness = BRIGHTNESS_DEF;
-	sd->contrast = CONTRAST_DEF;
-	sd->autogain = AUTOGAIN_DEF;
-	sd->lightfreq = FREQ_DEF;
+	gspca_dev->cam.ctrls = sd->ctrls;
 	sd->quality = QUALITY_DEF;
 
 	return 0;
@@ -6441,6 +6424,7 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		[SENSOR_ADCM2700] =	4,
 		[SENSOR_CS2102] =	4,
 		[SENSOR_CS2102K] =	5,
+		[SENSOR_GC0303] =	3,
 		[SENSOR_GC0305] =	4,
 		[SENSOR_HDCS2020b] =	4,
 		[SENSOR_HV7131B] =	4,
@@ -6456,12 +6440,12 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		[SENSOR_PB0330] =	4,
 		[SENSOR_PO2030] =	4,
 		[SENSOR_TAS5130C] =	3,
-		[SENSOR_TAS5130C_VF0250] = 3,
 	};
 	static const u8 mode_tb[SENSOR_MAX] = {
 		[SENSOR_ADCM2700] =	2,
 		[SENSOR_CS2102] =	1,
 		[SENSOR_CS2102K] =	1,
+		[SENSOR_GC0303] =	1,
 		[SENSOR_GC0305] =	1,
 		[SENSOR_HDCS2020b] =	1,
 		[SENSOR_HV7131B] =	1,
@@ -6477,7 +6461,6 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		[SENSOR_PB0330] =	1,
 		[SENSOR_PO2030] =	1,
 		[SENSOR_TAS5130C] =	1,
-		[SENSOR_TAS5130C_VF0250] = 1,
 	};
 
 	sensor = zcxx_probeSensor(gspca_dev);
@@ -6493,8 +6476,8 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			case SENSOR_MC501CB:
 				PDEBUG(D_PROBE, "Sensor MC501CB");
 				break;
-			case SENSOR_TAS5130C_VF0250:
-				PDEBUG(D_PROBE, "Sensor Tas5130 (VF0250)");
+			case SENSOR_GC0303:
+				PDEBUG(D_PROBE, "Sensor GC0303");
 				break;
 			default:
 				warn("Unknown sensor - set to TAS5130C");
@@ -6581,14 +6564,14 @@ static int sd_init(struct gspca_dev *gspca_dev)
 			PDEBUG(D_PROBE, "Find Sensor GC0305");
 			sd->sensor = SENSOR_GC0305;
 			break;
-		case 0x0250:
-			PDEBUG(D_PROBE, "Sensor Tas5130 (VF0250)");
-			sd->sensor =  SENSOR_TAS5130C_VF0250;
+		case 0x0303:
+			PDEBUG(D_PROBE, "Sensor GC0303");
+			sd->sensor =  SENSOR_GC0303;
 			break;
 		case 0x2030:
 			PDEBUG(D_PROBE, "Find Sensor PO2030");
 			sd->sensor = SENSOR_PO2030;
-			sd->sharpness = 0;		/* from win traces */
+			sd->ctrls[SHARPNESS].def = 0;	/* from win traces */
 			break;
 		case 0x7620:
 			PDEBUG(D_PROBE, "Find Sensor OV7620");
@@ -6629,11 +6612,12 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		cam->nmodes = ARRAY_SIZE(broken_vga_mode);
 		break;
 	}
-	sd->gamma = gamma[sd->sensor];
+
+	sd->ctrls[GAMMA].def = gamma[sd->sensor];
 
 	switch (sd->sensor) {
 	case SENSOR_OV7630C:
-		gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
+		gspca_dev->ctrl_dis = (1 << LIGHTFREQ);
 		break;
 	}
 
@@ -6653,6 +6637,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 			{cs2102_Initial, cs2102_InitialScale},
 	[SENSOR_CS2102K] =
 			{cs2102K_Initial, cs2102K_InitialScale},
+	[SENSOR_GC0303] =
+		{gc0303_Initial, gc0303_InitialScale},
 	[SENSOR_GC0305] =
 			{gc0305_Initial, gc0305_InitialScale},
 	[SENSOR_HDCS2020b] =
@@ -6683,8 +6669,6 @@ static int sd_start(struct gspca_dev *gspca_dev)
 			{po2030_Initial, po2030_InitialScale},
 	[SENSOR_TAS5130C] =
 			{tas5130c_Initial, tas5130c_InitialScale},
-	[SENSOR_TAS5130C_VF0250] =
-		{tas5130c_vf0250_Initial, tas5130c_vf0250_InitialScale},
 	};
 
 	/* create the JPEG header */
@@ -6709,7 +6693,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_OV7620:
 	case SENSOR_PO2030:
 	case SENSOR_TAS5130C:
-	case SENSOR_TAS5130C_VF0250:
+	case SENSOR_GC0303:
 /*		msleep(100);			 * ?? */
 		reg_r(gspca_dev, 0x0002);	/* --> 0x40 */
 		reg_w(gspca_dev, 0x09, 0x01ad);	/* (from win traces) */
@@ -6843,114 +6827,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	gspca_frame_add(gspca_dev, INTER_PACKET, data, len);
 }
 
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->brightness = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->brightness;
-	return 0;
-}
-
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->contrast = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->contrast;
-	return 0;
-}
-
-static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->autogain = val;
-	if (gspca_dev->streaming)
-		setautogain(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->autogain;
-	return 0;
-}
-
-static int sd_setgamma(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->gamma = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getgamma(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->gamma;
-	return 0;
-}
-
-static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->lightfreq = val;
-	if (gspca_dev->streaming)
-		setlightfreq(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->lightfreq;
-	return 0;
-}
-
-static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	sd->sharpness = val;
-	if (gspca_dev->streaming)
-		setsharpness(gspca_dev);
-	return gspca_dev->usb_err;
-}
-
-static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	*val = sd->sharpness;
-	return 0;
-}
-
 static int sd_querymenu(struct gspca_dev *gspca_dev,
 			struct v4l2_querymenu *menu)
 {
@@ -7045,8 +6921,8 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x4036)},
 	{USB_DEVICE(0x041e, 0x403a)},
-	{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
-	{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
+	{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_GC0303},
+	{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_GC0303},
 	{USB_DEVICE(0x0458, 0x7007)},
 	{USB_DEVICE(0x0458, 0x700c)},
 	{USB_DEVICE(0x0458, 0x700f)},
@@ -7066,8 +6942,8 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x046d, 0x08af)},
 	{USB_DEVICE(0x046d, 0x08b9)},
 	{USB_DEVICE(0x046d, 0x08d7)},
-	{USB_DEVICE(0x046d, 0x08d9)},
 	{USB_DEVICE(0x046d, 0x08d8)},
+	{USB_DEVICE(0x046d, 0x08d9)},
 	{USB_DEVICE(0x046d, 0x08da)},
 	{USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
 	{USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106},
diff --git a/drivers/media/video/hdpvr/hdpvr-core.c b/drivers/media/video/hdpvr/hdpvr-core.c
index b70d6afc9fe..f7d1ee55185 100644
--- a/drivers/media/video/hdpvr/hdpvr-core.c
+++ b/drivers/media/video/hdpvr/hdpvr-core.c
@@ -385,6 +385,11 @@ static int hdpvr_probe(struct usb_interface *interface,
 		v4l2_err(&dev->v4l2_dev, "registering i2c adapter failed\n");
 		goto error;
 	}
+
+	/* until i2c is working properly */
+	retval = 0; /* hdpvr_register_i2c_ir(dev); */
+	if (retval < 0)
+		v4l2_err(&dev->v4l2_dev, "registering i2c IR devices failed\n");
 #endif /* CONFIG_I2C */
 
 	/* let the user know what node this device is now attached to */
diff --git a/drivers/media/video/hdpvr/hdpvr-i2c.c b/drivers/media/video/hdpvr/hdpvr-i2c.c
index 409de11096d..24966aa02a7 100644
--- a/drivers/media/video/hdpvr/hdpvr-i2c.c
+++ b/drivers/media/video/hdpvr/hdpvr-i2c.c
@@ -4,6 +4,9 @@
  *
  * Copyright (C) 2008      Janne Grunau (j@jannau.net)
  *
+ * IR device registration code is
+ * Copyright (C) 2010	Andy Walls <awalls@md.metrocast.net>
+ *
  *	This program is free software; you can redistribute it and/or
  *	modify it under the terms of the GNU General Public License as
  *	published by the Free Software Foundation, version 2.
@@ -22,6 +25,56 @@
 #define REQTYPE_I2C_WRITE	0xb0
 #define REQTYPE_I2C_WRITE_STATT	0xd0
 
+#define Z8F0811_IR_TX_I2C_ADDR	0x70
+#define Z8F0811_IR_RX_I2C_ADDR	0x71
+
+static const u8 ir_i2c_addrs[] = {
+	Z8F0811_IR_TX_I2C_ADDR,
+	Z8F0811_IR_RX_I2C_ADDR,
+};
+
+static const char * const ir_devicenames[] = {
+	"ir_tx_z8f0811_hdpvr",
+	"ir_rx_z8f0811_hdpvr",
+};
+
+static int hdpvr_new_i2c_ir(struct hdpvr_device *dev, struct i2c_adapter *adap,
+			    const char *type, u8 addr)
+{
+	struct i2c_board_info info;
+	struct IR_i2c_init_data *init_data = &dev->ir_i2c_init_data;
+	unsigned short addr_list[2] = { addr, I2C_CLIENT_END };
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strlcpy(info.type, type, I2C_NAME_SIZE);
+
+	/* Our default information for ir-kbd-i2c.c to use */
+	switch (addr) {
+	case Z8F0811_IR_RX_I2C_ADDR:
+		init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
+		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
+		init_data->type = RC_TYPE_RC5;
+		init_data->name = "HD PVR";
+		info.platform_data = init_data;
+		break;
+	}
+
+	return i2c_new_probed_device(adap, &info, addr_list, NULL) == NULL ?
+	       -1 : 0;
+}
+
+int hdpvr_register_i2c_ir(struct hdpvr_device *dev)
+{
+	int i;
+	int ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(ir_i2c_addrs); i++)
+		ret += hdpvr_new_i2c_ir(dev, dev->i2c_adapter,
+					ir_devicenames[i], ir_i2c_addrs[i]);
+
+	return ret;
+}
+
 static int hdpvr_i2c_read(struct hdpvr_device *dev, unsigned char addr,
 			  char *data, int len)
 {
diff --git a/drivers/media/video/hdpvr/hdpvr.h b/drivers/media/video/hdpvr/hdpvr.h
index 5efc963f916..37f1e4c7675 100644
--- a/drivers/media/video/hdpvr/hdpvr.h
+++ b/drivers/media/video/hdpvr/hdpvr.h
@@ -16,6 +16,7 @@
 #include <linux/videodev2.h>
 
 #include <media/v4l2-device.h>
+#include <media/ir-kbd-i2c.h>
 
 #define HDPVR_MAJOR_VERSION 0
 #define HDPVR_MINOR_VERSION 2
@@ -109,6 +110,9 @@ struct hdpvr_device {
 	/* I2C lock */
 	struct mutex		i2c_mutex;
 
+	/* For passing data to ir-kbd-i2c */
+	struct IR_i2c_init_data	ir_i2c_init_data;
+
 	/* usb control transfer buffer and lock */
 	struct mutex		usbc_mutex;
 	u8			*usbc_buf;
@@ -306,6 +310,8 @@ int hdpvr_cancel_queue(struct hdpvr_device *dev);
 /* i2c adapter registration */
 int hdpvr_register_i2c_adapter(struct hdpvr_device *dev);
 
+int hdpvr_register_i2c_ir(struct hdpvr_device *dev);
+
 /*========================================================================*/
 /* buffer management */
 int hdpvr_free_buffers(struct hdpvr_device *dev);
diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c
index 7ae96367b3a..cdf8b191f71 100644
--- a/drivers/media/video/hexium_gemini.c
+++ b/drivers/media/video/hexium_gemini.c
@@ -37,15 +37,15 @@ static int hexium_num;
 
 #define HEXIUM_INPUTS	9
 static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = {
-	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
 };
 
 #define HEXIUM_AUDIOS	0
diff --git a/drivers/media/video/hexium_orion.c b/drivers/media/video/hexium_orion.c
index b72d0f0b831..6ad7e1c8b92 100644
--- a/drivers/media/video/hexium_orion.c
+++ b/drivers/media/video/hexium_orion.c
@@ -38,15 +38,15 @@ static int hexium_num;
 
 #define HEXIUM_INPUTS	9
 static struct v4l2_input hexium_inputs[HEXIUM_INPUTS] = {
-	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+	{ 0, "CVBS 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 1, "CVBS 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 2, "CVBS 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 3, "CVBS 4",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 4, "CVBS 5",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 5, "CVBS 6",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 6, "Y/C 1",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 7, "Y/C 2",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ 8, "Y/C 3",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
 };
 
 #define HEXIUM_AUDIOS	0
diff --git a/drivers/media/video/imx074.c b/drivers/media/video/imx074.c
index 380e459f899..1a116911571 100644
--- a/drivers/media/video/imx074.c
+++ b/drivers/media/video/imx074.c
@@ -451,7 +451,6 @@ static int imx074_probe(struct i2c_client *client,
 	ret = imx074_video_probe(icd, client);
 	if (ret < 0) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(priv);
 		return ret;
 	}
@@ -468,8 +467,6 @@ static int imx074_remove(struct i2c_client *client)
 	icd->ops = NULL;
 	if (icl->free_bus)
 		icl->free_bus(icl);
-	i2c_set_clientdata(client, NULL);
-	client->driver = NULL;
 	kfree(priv);
 
 	return 0;
diff --git a/drivers/media/video/ir-kbd-i2c.c b/drivers/media/video/ir-kbd-i2c.c
index 5a000c65ae9..c87b6bc4555 100644
--- a/drivers/media/video/ir-kbd-i2c.c
+++ b/drivers/media/video/ir-kbd-i2c.c
@@ -44,10 +44,9 @@
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
-#include <linux/i2c-id.h>
 #include <linux/workqueue.h>
 
-#include <media/ir-core.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 
 /* ----------------------------------------------------------------------- */
@@ -253,7 +252,7 @@ static void ir_key_poll(struct IR_i2c *ir)
 	}
 
 	if (rc)
-		ir_keydown(ir->input, ir_key, 0);
+		rc_keydown(ir->rc, ir_key, 0);
 }
 
 static void ir_work(struct work_struct *work)
@@ -270,22 +269,18 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	char *ir_codes = NULL;
 	const char *name = NULL;
-	u64 ir_type = 0;
+	u64 rc_type = RC_TYPE_UNKNOWN;
 	struct IR_i2c *ir;
-	struct input_dev *input_dev;
+	struct rc_dev *rc = NULL;
 	struct i2c_adapter *adap = client->adapter;
 	unsigned short addr = client->addr;
 	int err;
 
-	ir = kzalloc(sizeof(struct IR_i2c),GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev) {
-		err = -ENOMEM;
-		goto err_out_free;
-	}
+	ir = kzalloc(sizeof(struct IR_i2c), GFP_KERNEL);
+	if (!ir)
+		return -ENOMEM;
 
 	ir->c = client;
-	ir->input = input_dev;
 	ir->polling_interval = DEFAULT_POLLING_INTERVAL;
 	i2c_set_clientdata(client, ir);
 
@@ -293,7 +288,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	case 0x64:
 		name        = "Pixelview";
 		ir->get_key = get_key_pixelview;
-		ir_type     = IR_TYPE_OTHER;
+		rc_type     = RC_TYPE_OTHER;
 		ir_codes    = RC_MAP_EMPTY;
 		break;
 	case 0x18:
@@ -301,7 +296,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	case 0x1a:
 		name        = "Hauppauge";
 		ir->get_key = get_key_haup;
-		ir_type     = IR_TYPE_RC5;
+		rc_type     = RC_TYPE_RC5;
 		if (hauppauge == 1) {
 			ir_codes    = RC_MAP_HAUPPAUGE_NEW;
 		} else {
@@ -311,19 +306,19 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	case 0x30:
 		name        = "KNC One";
 		ir->get_key = get_key_knc1;
-		ir_type     = IR_TYPE_OTHER;
+		rc_type     = RC_TYPE_OTHER;
 		ir_codes    = RC_MAP_EMPTY;
 		break;
 	case 0x6b:
 		name        = "FusionHDTV";
 		ir->get_key = get_key_fusionhdtv;
-		ir_type     = IR_TYPE_RC5;
+		rc_type     = RC_TYPE_RC5;
 		ir_codes    = RC_MAP_FUSIONHDTV_MCE;
 		break;
 	case 0x40:
 		name        = "AVerMedia Cardbus remote";
 		ir->get_key = get_key_avermedia_cardbus;
-		ir_type     = IR_TYPE_OTHER;
+		rc_type     = RC_TYPE_OTHER;
 		ir_codes    = RC_MAP_AVERMEDIA_CARDBUS;
 		break;
 	}
@@ -334,9 +329,11 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 						client->dev.platform_data;
 
 		ir_codes = init_data->ir_codes;
+		rc = init_data->rc_dev;
+
 		name = init_data->name;
 		if (init_data->type)
-			ir_type = init_data->type;
+			rc_type = init_data->type;
 
 		if (init_data->polling_interval)
 			ir->polling_interval = init_data->polling_interval;
@@ -367,8 +364,21 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		}
 	}
 
+	if (!rc) {
+		/*
+		 * If platform_data doesn't specify rc_dev, initilize it
+		 * internally
+		 */
+		rc = rc_allocate_device();
+		if (!rc) {
+			err = -ENOMEM;
+			goto err_out_free;
+		}
+	}
+	ir->rc = rc;
+
 	/* Make sure we are all setup before going on */
-	if (!name || !ir->get_key || !ir_type || !ir_codes) {
+	if (!name || !ir->get_key || !rc_type || !ir_codes) {
 		dprintk(1, ": Unsupported device at address 0x%02x\n",
 			addr);
 		err = -ENODEV;
@@ -383,18 +393,28 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		 dev_name(&adap->dev),
 		 dev_name(&client->dev));
 
-	/* init + register input device */
-	ir->ir_type = ir_type;
-	input_dev->id.bustype = BUS_I2C;
-	input_dev->name       = ir->name;
-	input_dev->phys       = ir->phys;
+	/*
+	 * Initialize input_dev fields
+	 * It doesn't make sense to allow overriding them via platform_data
+	 */
+	rc->input_id.bustype = BUS_I2C;
+	rc->input_phys       = ir->phys;
+	rc->input_name	     = ir->name;
+
+	/*
+	 * Initialize the other fields of rc_dev
+	 */
+	rc->map_name       = ir->ir_codes;
+	rc->allowed_protos = rc_type;
+	if (!rc->driver_name)
+		rc->driver_name = MODULE_NAME;
 
-	err = ir_input_register(ir->input, ir->ir_codes, NULL, MODULE_NAME);
+	err = rc_register_device(rc);
 	if (err)
 		goto err_out_free;
 
 	printk(MODULE_NAME ": %s detected at %s [%s]\n",
-	       ir->input->name, ir->input->phys, adap->name);
+	       ir->name, ir->phys, adap->name);
 
 	/* start polling via eventd */
 	INIT_DELAYED_WORK(&ir->work, ir_work);
@@ -403,6 +423,8 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	return 0;
 
  err_out_free:
+	/* Only frees rc if it were allocated internally */
+	rc_free_device(rc);
 	kfree(ir);
 	return err;
 }
@@ -415,7 +437,7 @@ static int ir_remove(struct i2c_client *client)
 	cancel_delayed_work_sync(&ir->work);
 
 	/* unregister device */
-	ir_input_unregister(ir->input);
+	rc_unregister_device(ir->rc);
 
 	/* free memory */
 	kfree(ir);
@@ -427,6 +449,7 @@ static const struct i2c_device_id ir_kbd_id[] = {
 	{ "ir_video", 0 },
 	/* IR device specific entries should be added here */
 	{ "ir_rx_z8f0811_haup", 0 },
+	{ "ir_rx_z8f0811_hdpvr", 0 },
 	{ }
 };
 
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index be4af1fa557..89f65914cc8 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -1,9 +1,8 @@
 config VIDEO_IVTV
 	tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
 	depends on VIDEO_V4L2 && PCI && I2C
-	depends on INPUT   # due to VIDEO_IR
 	select I2C_ALGOBIT
-	depends on VIDEO_IR
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c
index 87afbbee206..145e4749a69 100644
--- a/drivers/media/video/ivtv/ivtv-cards.c
+++ b/drivers/media/video/ivtv/ivtv-cards.c
@@ -405,7 +405,8 @@ static const struct ivtv_card ivtv_card_avc2410 = {
 	.hw_audio_ctrl = IVTV_HW_MSP34XX,
 	.hw_muxer = IVTV_HW_CS53L32A,
 	.hw_all = IVTV_HW_MSP34XX | IVTV_HW_CS53L32A |
-		  IVTV_HW_SAA7115 | IVTV_HW_TUNER,
+		  IVTV_HW_SAA7115 | IVTV_HW_TUNER |
+		  IVTV_HW_I2C_IR_RX_ADAPTEC,
 	.video_inputs = {
 		{ IVTV_CARD_INPUT_VID_TUNER,  0, IVTV_SAA71XX_COMPOSITE4 },
 		{ IVTV_CARD_INPUT_SVIDEO1,    1, IVTV_SAA71XX_SVIDEO0    },
@@ -1313,7 +1314,6 @@ int ivtv_get_input(struct ivtv *itv, u16 index, struct v4l2_input *input)
 		"Composite 3"
 	};
 
-	memset(input, 0, sizeof(*input));
 	if (index >= itv->nof_inputs)
 		return -EINVAL;
 	input->index = index;
@@ -1331,7 +1331,6 @@ int ivtv_get_output(struct ivtv *itv, u16 index, struct v4l2_output *output)
 {
 	const struct ivtv_card_output *card_output = itv->card->video_outputs + index;
 
-	memset(output, 0, sizeof(*output));
 	if (index >= itv->card->nof_outputs)
 		return -EINVAL;
 	output->index = index;
diff --git a/drivers/media/video/ivtv/ivtv-cards.h b/drivers/media/video/ivtv/ivtv-cards.h
index 78eca992e1f..e6f5c02981f 100644
--- a/drivers/media/video/ivtv/ivtv-cards.h
+++ b/drivers/media/video/ivtv/ivtv-cards.h
@@ -111,6 +111,7 @@
 #define IVTV_HW_I2C_IR_RX_HAUP_INT	(1 << 18)
 #define IVTV_HW_Z8F0811_IR_TX_HAUP	(1 << 19)
 #define IVTV_HW_Z8F0811_IR_RX_HAUP	(1 << 20)
+#define IVTV_HW_I2C_IR_RX_ADAPTEC	(1 << 21)
 
 #define IVTV_HW_Z8F0811_IR_HAUP	(IVTV_HW_Z8F0811_IR_RX_HAUP | \
 				 IVTV_HW_Z8F0811_IR_TX_HAUP)
@@ -120,7 +121,8 @@
 #define IVTV_HW_IR_RX_ANY (IVTV_HW_I2C_IR_RX_AVER | \
 			   IVTV_HW_I2C_IR_RX_HAUP_EXT | \
 			   IVTV_HW_I2C_IR_RX_HAUP_INT | \
-			   IVTV_HW_Z8F0811_IR_RX_HAUP)
+			   IVTV_HW_Z8F0811_IR_RX_HAUP | \
+			   IVTV_HW_I2C_IR_RX_ADAPTEC)
 
 #define IVTV_HW_IR_TX_ANY (IVTV_HW_Z8F0811_IR_TX_HAUP)
 
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index e421d15b0f5..39946420b30 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -1029,8 +1029,13 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
 	itv->enc_mem = ioremap_nocache(itv->base_addr + IVTV_ENCODER_OFFSET,
 				       IVTV_ENCODER_SIZE);
 	if (!itv->enc_mem) {
-		IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
-		IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
+		IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
+			 "encoder memory\n");
+		IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of "
+			 "vmalloc address space for this window\n");
+		IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
+		IVTV_ERR("Use the vmalloc= kernel command line option to set "
+			 "VmallocTotal to a larger value\n");
 		retval = -ENOMEM;
 		goto free_mem;
 	}
@@ -1041,8 +1046,14 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
 		itv->dec_mem = ioremap_nocache(itv->base_addr + IVTV_DECODER_OFFSET,
 				IVTV_DECODER_SIZE);
 		if (!itv->dec_mem) {
-			IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
-			IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
+			IVTV_ERR("ioremap failed. Can't get a window into "
+				 "CX23415 decoder memory\n");
+			IVTV_ERR("Each capture card with a CX23415 needs 8 MB "
+				 "of vmalloc address space for this window\n");
+			IVTV_ERR("Check the output of 'grep Vmalloc "
+				 "/proc/meminfo'\n");
+			IVTV_ERR("Use the vmalloc= kernel command line option "
+				 "to set VmallocTotal to a larger value\n");
 			retval = -ENOMEM;
 			goto free_mem;
 		}
@@ -1057,8 +1068,13 @@ static int __devinit ivtv_probe(struct pci_dev *pdev,
 	itv->reg_mem =
 	    ioremap_nocache(itv->base_addr + IVTV_REG_OFFSET, IVTV_REG_SIZE);
 	if (!itv->reg_mem) {
-		IVTV_ERR("ioremap failed, perhaps increasing __VMALLOC_RESERVE in page.h\n");
-		IVTV_ERR("or disabling CONFIG_HIGHMEM4G into the kernel would help\n");
+		IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
+			 "register space\n");
+		IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of "
+			 "vmalloc address space for this window\n");
+		IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
+		IVTV_ERR("Use the vmalloc= kernel command line option to set "
+			 "VmallocTotal to a larger value\n");
 		retval = -ENOMEM;
 		goto free_io;
 	}
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index d727485da88..c57a58523ca 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -570,8 +570,8 @@ ssize_t ivtv_v4l2_write(struct file *filp, const char __user *user_buf, size_t c
 		int elems = count / sizeof(struct v4l2_sliced_vbi_data);
 
 		set_bit(IVTV_F_S_APPL_IO, &s->s_flags);
-		ivtv_write_vbi(itv, (const struct v4l2_sliced_vbi_data *)user_buf, elems);
-		return elems * sizeof(struct v4l2_sliced_vbi_data);
+		return ivtv_write_vbi_from_user(itv,
+		   (const struct v4l2_sliced_vbi_data __user *)user_buf, elems);
 	}
 
 	mode = s->type == IVTV_DEC_STREAM_TYPE_MPG ? OUT_MPG : OUT_YUV;
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 9e8039ac909..e103b8fc745 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -94,6 +94,7 @@
 #define IVTV_HAUP_INT_IR_RX_I2C_ADDR 	0x18
 #define IVTV_Z8F0811_IR_TX_I2C_ADDR	0x70
 #define IVTV_Z8F0811_IR_RX_I2C_ADDR	0x71
+#define IVTV_ADAPTEC_IR_ADDR		0x6b
 
 /* This array should match the IVTV_HW_ defines */
 static const u8 hw_addrs[] = {
@@ -118,6 +119,7 @@ static const u8 hw_addrs[] = {
 	IVTV_HAUP_INT_IR_RX_I2C_ADDR,	/* IVTV_HW_I2C_IR_RX_HAUP_INT */
 	IVTV_Z8F0811_IR_TX_I2C_ADDR,	/* IVTV_HW_Z8F0811_IR_TX_HAUP */
 	IVTV_Z8F0811_IR_RX_I2C_ADDR,	/* IVTV_HW_Z8F0811_IR_RX_HAUP */
+	IVTV_ADAPTEC_IR_ADDR,		/* IVTV_HW_I2C_IR_RX_ADAPTEC */
 };
 
 /* This array should match the IVTV_HW_ defines */
@@ -143,8 +145,34 @@ static const char * const hw_devicenames[] = {
 	"ir_video",		/* IVTV_HW_I2C_IR_RX_HAUP_INT */
 	"ir_tx_z8f0811_haup",	/* IVTV_HW_Z8F0811_IR_TX_HAUP */
 	"ir_rx_z8f0811_haup",	/* IVTV_HW_Z8F0811_IR_RX_HAUP */
+	"ir_video",		/* IVTV_HW_I2C_IR_RX_ADAPTEC */
 };
 
+static int get_key_adaptec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+	unsigned char keybuf[4];
+
+	keybuf[0] = 0x00;
+	i2c_master_send(ir->c, keybuf, 1);
+	/* poll IR chip */
+	if (i2c_master_recv(ir->c, keybuf, sizeof(keybuf)) != sizeof(keybuf)) {
+		return 0;
+	}
+
+	/* key pressed ? */
+	if (keybuf[2] == 0xff)
+		return 0;
+
+	/* remove repeat bit */
+	keybuf[2] &= 0x7f;
+	keybuf[3] |= 0x80;
+
+	*ir_key = keybuf[3] | keybuf[2] << 8 | keybuf[1] << 16 |keybuf[0] << 24;
+	*ir_raw = *ir_key;
+
+	return 1;
+}
+
 static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
 {
 	struct i2c_board_info info;
@@ -172,7 +200,7 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
 		init_data->ir_codes = RC_MAP_AVERMEDIA_CARDBUS;
 		init_data->internal_get_key_func =
 					IR_KBD_GET_KEY_AVERMEDIA_CARDBUS;
-		init_data->type = IR_TYPE_OTHER;
+		init_data->type = RC_TYPE_OTHER;
 		init_data->name = "AVerMedia AVerTV card";
 		break;
 	case IVTV_HW_I2C_IR_RX_HAUP_EXT:
@@ -180,15 +208,22 @@ static int ivtv_i2c_new_ir(struct ivtv *itv, u32 hw, const char *type, u8 addr)
 		/* Default to old black remote */
 		init_data->ir_codes = RC_MAP_RC5_TV;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP;
-		init_data->type = IR_TYPE_RC5;
+		init_data->type = RC_TYPE_RC5;
 		init_data->name = itv->card_name;
 		break;
 	case IVTV_HW_Z8F0811_IR_RX_HAUP:
 		/* Default to grey remote */
 		init_data->ir_codes = RC_MAP_HAUPPAUGE_NEW;
 		init_data->internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
-		init_data->type = IR_TYPE_RC5;
+		init_data->type = RC_TYPE_RC5;
+		init_data->name = itv->card_name;
+		break;
+	case IVTV_HW_I2C_IR_RX_ADAPTEC:
+		init_data->get_key = get_key_adaptec;
 		init_data->name = itv->card_name;
+		/* FIXME: The protocol and RC_MAP needs to be corrected */
+		init_data->ir_codes = RC_MAP_EMPTY;
+		init_data->type = RC_TYPE_UNKNOWN;
 		break;
 	}
 
@@ -218,8 +253,6 @@ struct i2c_client *ivtv_i2c_new_ir_legacy(struct ivtv *itv)
 	const unsigned short addr_list[] = {
 		0x1a,	/* Hauppauge IR external - collides with WM8739 */
 		0x18,	/* Hauppauge IR internal */
-		0x71,	/* Hauppauge IR (PVR150) */
-		0x6b,	/* Adaptec IR */
 		I2C_CLIENT_END
 	};
 
@@ -239,19 +272,16 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
 		return -1;
 	if (hw == IVTV_HW_TUNER) {
 		/* special tuner handling */
-		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
-				adap, NULL, type,
-				0, itv->card_i2c->radio);
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+				itv->card_i2c->radio);
 		if (sd)
 			sd->grp_id = 1 << idx;
-		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
-				adap, NULL, type,
-				0, itv->card_i2c->demod);
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+				itv->card_i2c->demod);
 		if (sd)
 			sd->grp_id = 1 << idx;
-		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
-				adap, NULL, type,
-				0, itv->card_i2c->tv);
+		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+				itv->card_i2c->tv);
 		if (sd)
 			sd->grp_id = 1 << idx;
 		return sd ? 0 : -1;
@@ -267,17 +297,16 @@ int ivtv_i2c_register(struct ivtv *itv, unsigned idx)
 	/* It's an I2C device other than an analog tuner or IR chip */
 	if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
 		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
-				adap, NULL, type, 0, I2C_ADDRS(hw_addrs[idx]));
+				adap, type, 0, I2C_ADDRS(hw_addrs[idx]));
 	} else if (hw == IVTV_HW_CX25840) {
 		struct cx25840_platform_data pdata;
 
 		pdata.pvr150_workaround = itv->pvr150_workaround;
 		sd = v4l2_i2c_new_subdev_cfg(&itv->v4l2_dev,
-				adap, NULL, type, 0, &pdata, hw_addrs[idx],
-				NULL);
+				adap, type, 0, &pdata, hw_addrs[idx], NULL);
 	} else {
 		sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
-				adap, NULL, type, hw_addrs[idx], NULL);
+				adap, type, hw_addrs[idx], NULL);
 	}
 	if (sd)
 		sd->grp_id = 1 << idx;
diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c
index e1c347e5ebd..2dfa957b0fd 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.c
+++ b/drivers/media/video/ivtv/ivtv-vbi.c
@@ -92,54 +92,97 @@ static int odd_parity(u8 c)
 	return c & 1;
 }
 
-void ivtv_write_vbi(struct ivtv *itv, const struct v4l2_sliced_vbi_data *sliced, size_t cnt)
+static void ivtv_write_vbi_line(struct ivtv *itv,
+				const struct v4l2_sliced_vbi_data *d,
+				struct vbi_cc *cc, int *found_cc)
 {
 	struct vbi_info *vi = &itv->vbi;
-	struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } };
-	int found_cc = 0;
-	size_t i;
-
-	for (i = 0; i < cnt; i++) {
-		const struct v4l2_sliced_vbi_data *d = sliced + i;
 
-		if (d->id == V4L2_SLICED_CAPTION_525 && d->line == 21) {
-			if (d->field) {
-				cc.even[0] = d->data[0];
-				cc.even[1] = d->data[1];
-			} else {
-				cc.odd[0] = d->data[0];
-				cc.odd[1] = d->data[1];
-			}
-			found_cc = 1;
+	if (d->id == V4L2_SLICED_CAPTION_525 && d->line == 21) {
+		if (d->field) {
+			cc->even[0] = d->data[0];
+			cc->even[1] = d->data[1];
+		} else {
+			cc->odd[0] = d->data[0];
+			cc->odd[1] = d->data[1];
 		}
-		else if (d->id == V4L2_SLICED_VPS && d->line == 16 && d->field == 0) {
-			struct vbi_vps vps;
-
-			vps.data[0] = d->data[2];
-			vps.data[1] = d->data[8];
-			vps.data[2] = d->data[9];
-			vps.data[3] = d->data[10];
-			vps.data[4] = d->data[11];
-			if (memcmp(&vps, &vi->vps_payload, sizeof(vps))) {
-				vi->vps_payload = vps;
-				set_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags);
-			}
+		*found_cc = 1;
+	} else if (d->id == V4L2_SLICED_VPS && d->line == 16 && d->field == 0) {
+		struct vbi_vps vps;
+
+		vps.data[0] = d->data[2];
+		vps.data[1] = d->data[8];
+		vps.data[2] = d->data[9];
+		vps.data[3] = d->data[10];
+		vps.data[4] = d->data[11];
+		if (memcmp(&vps, &vi->vps_payload, sizeof(vps))) {
+			vi->vps_payload = vps;
+			set_bit(IVTV_F_I_UPDATE_VPS, &itv->i_flags);
 		}
-		else if (d->id == V4L2_SLICED_WSS_625 && d->line == 23 && d->field == 0) {
-			int wss = d->data[0] | d->data[1] << 8;
+	} else if (d->id == V4L2_SLICED_WSS_625 &&
+		   d->line == 23 && d->field == 0) {
+		int wss = d->data[0] | d->data[1] << 8;
 
-			if (vi->wss_payload != wss) {
-				vi->wss_payload = wss;
-				set_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags);
-			}
+		if (vi->wss_payload != wss) {
+			vi->wss_payload = wss;
+			set_bit(IVTV_F_I_UPDATE_WSS, &itv->i_flags);
 		}
 	}
-	if (found_cc && vi->cc_payload_idx < ARRAY_SIZE(vi->cc_payload)) {
-		vi->cc_payload[vi->cc_payload_idx++] = cc;
+}
+
+static void ivtv_write_vbi_cc_lines(struct ivtv *itv, const struct vbi_cc *cc)
+{
+	struct vbi_info *vi = &itv->vbi;
+
+	if (vi->cc_payload_idx < ARRAY_SIZE(vi->cc_payload)) {
+		memcpy(&vi->cc_payload[vi->cc_payload_idx], cc,
+		       sizeof(struct vbi_cc));
+		vi->cc_payload_idx++;
 		set_bit(IVTV_F_I_UPDATE_CC, &itv->i_flags);
 	}
 }
 
+static void ivtv_write_vbi(struct ivtv *itv,
+			   const struct v4l2_sliced_vbi_data *sliced,
+			   size_t cnt)
+{
+	struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } };
+	int found_cc = 0;
+	size_t i;
+
+	for (i = 0; i < cnt; i++)
+		ivtv_write_vbi_line(itv, sliced + i, &cc, &found_cc);
+
+	if (found_cc)
+		ivtv_write_vbi_cc_lines(itv, &cc);
+}
+
+ssize_t
+ivtv_write_vbi_from_user(struct ivtv *itv,
+			 const struct v4l2_sliced_vbi_data __user *sliced,
+			 size_t cnt)
+{
+	struct vbi_cc cc = { .odd = { 0x80, 0x80 }, .even = { 0x80, 0x80 } };
+	int found_cc = 0;
+	size_t i;
+	struct v4l2_sliced_vbi_data d;
+	ssize_t ret = cnt * sizeof(struct v4l2_sliced_vbi_data);
+
+	for (i = 0; i < cnt; i++) {
+		if (copy_from_user(&d, sliced + i,
+				   sizeof(struct v4l2_sliced_vbi_data))) {
+			ret = -EFAULT;
+			break;
+		}
+		ivtv_write_vbi_line(itv, sliced + i, &cc, &found_cc);
+	}
+
+	if (found_cc)
+		ivtv_write_vbi_cc_lines(itv, &cc);
+
+	return ret;
+}
+
 static void copy_vbi_data(struct ivtv *itv, int lines, u32 pts_stamp)
 {
 	int line = 0;
diff --git a/drivers/media/video/ivtv/ivtv-vbi.h b/drivers/media/video/ivtv/ivtv-vbi.h
index 970567b9194..166dd0b75d0 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.h
+++ b/drivers/media/video/ivtv/ivtv-vbi.h
@@ -20,7 +20,10 @@
 #ifndef IVTV_VBI_H
 #define IVTV_VBI_H
 
-void ivtv_write_vbi(struct ivtv *itv, const struct v4l2_sliced_vbi_data *sliced, size_t count);
+ssize_t
+ivtv_write_vbi_from_user(struct ivtv *itv,
+			 const struct v4l2_sliced_vbi_data __user *sliced,
+			 size_t count);
 void ivtv_process_vbi_data(struct ivtv *itv, struct ivtv_buffer *buf,
 			   u64 pts_stamp, int streamtype);
 int ivtv_used_line(struct ivtv *itv, int line, int field);
diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c
index 3b19f5b25a7..c179041d91f 100644
--- a/drivers/media/video/mem2mem_testdev.c
+++ b/drivers/media/video/mem2mem_testdev.c
@@ -524,7 +524,6 @@ static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f)
 {
 	struct m2mtest_q_data *q_data;
 	struct videobuf_queue *vq;
-	int ret = 0;
 
 	vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
 	if (!vq)
@@ -534,12 +533,9 @@ static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f)
 	if (!q_data)
 		return -EINVAL;
 
-	mutex_lock(&vq->vb_lock);
-
 	if (videobuf_queue_is_busy(vq)) {
 		v4l2_err(&ctx->dev->v4l2_dev, "%s queue busy\n", __func__);
-		ret = -EBUSY;
-		goto out;
+		return -EBUSY;
 	}
 
 	q_data->fmt		= find_format(f);
@@ -553,9 +549,7 @@ static int vidioc_s_fmt(struct m2mtest_ctx *ctx, struct v4l2_format *f)
 		"Setting format for type %d, wxh: %dx%d, fmt: %d\n",
 		f->type, q_data->width, q_data->height, q_data->fmt->fourcc);
 
-out:
-	mutex_unlock(&vq->vb_lock);
-	return ret;
+	return 0;
 }
 
 static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
@@ -845,10 +839,12 @@ static void queue_init(void *priv, struct videobuf_queue *vq,
 		       enum v4l2_buf_type type)
 {
 	struct m2mtest_ctx *ctx = priv;
+	struct m2mtest_dev *dev = ctx->dev;
 
-	videobuf_queue_vmalloc_init(vq, &m2mtest_qops, ctx->dev->v4l2_dev.dev,
-				    &ctx->dev->irqlock, type, V4L2_FIELD_NONE,
-				    sizeof(struct m2mtest_buffer), priv, NULL);
+	videobuf_queue_vmalloc_init(vq, &m2mtest_qops, dev->v4l2_dev.dev,
+				    &dev->irqlock, type, V4L2_FIELD_NONE,
+				    sizeof(struct m2mtest_buffer), priv,
+				    &dev->dev_mutex);
 }
 
 
@@ -920,7 +916,7 @@ static const struct v4l2_file_operations m2mtest_fops = {
 	.open		= m2mtest_open,
 	.release	= m2mtest_release,
 	.poll		= m2mtest_poll,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.mmap		= m2mtest_mmap,
 };
 
@@ -965,6 +961,7 @@ static int m2mtest_probe(struct platform_device *pdev)
 	}
 
 	*vfd = m2mtest_videodev;
+	vfd->lock = &dev->dev_mutex;
 
 	ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
 	if (ret) {
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 2be23bccd3c..48d2c2419c1 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -1659,7 +1659,7 @@ static const struct v4l2_file_operations meye_fops = {
 	.open		= meye_open,
 	.release	= meye_release,
 	.mmap		= meye_mmap,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.poll		= meye_poll,
 };
 
@@ -1831,12 +1831,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 	msleep(1);
 	mchip_set(MCHIP_MM_INTA, MCHIP_MM_INTA_HIC_1_MASK);
 
-	if (video_register_device(meye.vdev, VFL_TYPE_GRABBER,
-				  video_nr) < 0) {
-		v4l2_err(v4l2_dev, "video_register_device failed\n");
-		goto outvideoreg;
-	}
-
 	mutex_init(&meye.lock);
 	init_waitqueue_head(&meye.proc_list);
 	meye.brightness = 32 << 10;
@@ -1858,6 +1852,12 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 	sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, 0);
 	sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, 48);
 
+	if (video_register_device(meye.vdev, VFL_TYPE_GRABBER,
+				  video_nr) < 0) {
+		v4l2_err(v4l2_dev, "video_register_device failed\n");
+		goto outvideoreg;
+	}
+
 	v4l2_info(v4l2_dev, "Motion Eye Camera Driver v%s.\n",
 	       MEYE_DRIVER_VERSION);
 	v4l2_info(v4l2_dev, "mchip KL5A72002 rev. %d, base %lx, irq %d\n",
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index fcb4cd94185..f7fc88d240e 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -798,7 +798,6 @@ static int mt9m001_remove(struct i2c_client *client)
 
 	icd->ops = NULL;
 	mt9m001_video_remove(icd);
-	client->driver = NULL;
 	kfree(mt9m001);
 
 	return 0;
diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c
index 525a16e7328..53fa2a7bf15 100644
--- a/drivers/media/video/mt9m111.c
+++ b/drivers/media/video/mt9m111.c
@@ -1092,7 +1092,6 @@ static int mt9m111_remove(struct i2c_client *client)
 	struct soc_camera_device *icd = client->dev.platform_data;
 
 	icd->ops = NULL;
-	client->driver = NULL;
 	kfree(mt9m111);
 
 	return 0;
diff --git a/drivers/media/video/mt9t031.c b/drivers/media/video/mt9t031.c
index 9bd44a816ea..7ce279c3751 100644
--- a/drivers/media/video/mt9t031.c
+++ b/drivers/media/video/mt9t031.c
@@ -896,7 +896,6 @@ static int mt9t031_remove(struct i2c_client *client)
 
 	if (icd)
 		icd->ops = NULL;
-	client->driver = NULL;
 	kfree(mt9t031);
 
 	return 0;
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index b96171cc79f..6a784c87e5f 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -930,7 +930,6 @@ static int mt9v022_remove(struct i2c_client *client)
 
 	icd->ops = NULL;
 	mt9v022_video_remove(icd);
-	client->driver = NULL;
 	kfree(mt9v022);
 
 	return 0;
diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c
index 5e486a88ad7..bc0c23a1009 100644
--- a/drivers/media/video/mx1_camera.c
+++ b/drivers/media/video/mx1_camera.c
@@ -382,10 +382,9 @@ static void mx1_camera_init_videobuf(struct videobuf_queue *q,
 	struct mx1_camera_dev *pcdev = ici->priv;
 
 	videobuf_queue_dma_contig_init(q, &mx1_videobuf_ops, icd->dev.parent,
-					&pcdev->lock,
-					V4L2_BUF_TYPE_VIDEO_CAPTURE,
-					V4L2_FIELD_NONE,
-					sizeof(struct mx1_buffer), icd, NULL);
+				&pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
+				V4L2_FIELD_NONE,
+				sizeof(struct mx1_buffer), icd, &icd->video_lock);
 }
 
 static int mclk_get_divisor(struct mx1_camera_dev *pcdev)
diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c
index 4a27862da30..4eab1c62031 100644
--- a/drivers/media/video/mx2_camera.c
+++ b/drivers/media/video/mx2_camera.c
@@ -31,6 +31,7 @@
 
 #include <media/v4l2-common.h>
 #include <media/v4l2-dev.h>
+#include <media/videobuf-core.h>
 #include <media/videobuf-dma-contig.h>
 #include <media/soc_camera.h>
 #include <media/soc_mediabus.h>
@@ -682,7 +683,8 @@ static void mx2_camera_init_videobuf(struct videobuf_queue *q,
 
 	videobuf_queue_dma_contig_init(q, &mx2_videobuf_ops, pcdev->dev,
 			&pcdev->lock, V4L2_BUF_TYPE_VIDEO_CAPTURE,
-			V4L2_FIELD_NONE, sizeof(struct mx2_buffer), icd, NULL);
+			V4L2_FIELD_NONE, sizeof(struct mx2_buffer),
+			icd, &icd->video_lock);
 }
 
 #define MX2_BUS_FLAGS	(SOCAM_DATAWIDTH_8 | \
@@ -806,8 +808,6 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd,
 
 	if (common_flags & SOCAM_PCLK_SAMPLE_RISING)
 		csicr1 |= CSICR1_REDGE;
-	if (common_flags & SOCAM_PCLK_SAMPLE_FALLING)
-		csicr1 |= CSICR1_INV_PCLK;
 	if (common_flags & SOCAM_VSYNC_ACTIVE_HIGH)
 		csicr1 |= CSICR1_SOF_POL;
 	if (common_flags & SOCAM_HSYNC_ACTIVE_HIGH)
@@ -903,8 +903,6 @@ static int mx2_camera_set_crop(struct soc_camera_device *icd,
 static int mx2_camera_set_fmt(struct soc_camera_device *icd,
 			       struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct mx2_camera_dev *pcdev = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
@@ -943,8 +941,6 @@ static int mx2_camera_set_fmt(struct soc_camera_device *icd,
 static int mx2_camera_try_fmt(struct soc_camera_device *icd,
 				  struct v4l2_format *f)
 {
-	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
-	struct mx2_camera_dev *pcdev = ici->priv;
 	struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
 	const struct soc_camera_format_xlate *xlate;
 	struct v4l2_pix_format *pix = &f->fmt.pix;
@@ -1024,13 +1020,13 @@ static int mx2_camera_querycap(struct soc_camera_host *ici,
 	return 0;
 }
 
-static int mx2_camera_reqbufs(struct soc_camera_file *icf,
+static int mx2_camera_reqbufs(struct soc_camera_device *icd,
 			      struct v4l2_requestbuffers *p)
 {
 	int i;
 
 	for (i = 0; i < p->count; i++) {
-		struct mx2_buffer *buf = container_of(icf->vb_vidq.bufs[i],
+		struct mx2_buffer *buf = container_of(icd->vb_vidq.bufs[i],
 						      struct mx2_buffer, vb);
 		INIT_LIST_HEAD(&buf->vb.queue);
 	}
@@ -1151,9 +1147,9 @@ err_out:
 
 static unsigned int mx2_camera_poll(struct file *file, poll_table *pt)
 {
-	struct soc_camera_file *icf = file->private_data;
+	struct soc_camera_device *icd = file->private_data;
 
-	return videobuf_poll_stream(file, &icf->vb_vidq, pt);
+	return videobuf_poll_stream(file, &icd->vb_vidq, pt);
 }
 
 static struct soc_camera_host_ops mx2_soc_camera_host_ops = {
diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c
index 29c5fc34813..b9cb4a43695 100644
--- a/drivers/media/video/mx3_camera.c
+++ b/drivers/media/video/mx3_camera.c
@@ -27,6 +27,7 @@
 
 #include <mach/ipu.h>
 #include <mach/mx3_camera.h>
+#include <mach/dma.h>
 
 #define MX3_CAM_DRV_NAME "mx3-camera"
 
@@ -442,7 +443,7 @@ static void mx3_camera_init_videobuf(struct videobuf_queue *q,
 				       V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				       V4L2_FIELD_NONE,
 				       sizeof(struct mx3_camera_buffer), icd,
-				       NULL);
+				       &icd->video_lock);
 }
 
 /* First part of ipu_csi_init_interface() */
@@ -638,6 +639,9 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
 	struct dma_chan_request *rq = arg;
 	struct mx3_camera_pdata *pdata;
 
+	if (!imx_dma_is_ipu(chan))
+		return false;
+
 	if (!rq)
 		return false;
 
@@ -1182,13 +1186,12 @@ static int __devinit mx3_camera_probe(struct platform_device *pdev)
 		goto egetres;
 	}
 
-	mx3_cam = vmalloc(sizeof(*mx3_cam));
+	mx3_cam = vzalloc(sizeof(*mx3_cam));
 	if (!mx3_cam) {
 		dev_err(&pdev->dev, "Could not allocate mx3 camera object\n");
 		err = -ENOMEM;
 		goto ealloc;
 	}
-	memset(mx3_cam, 0, sizeof(*mx3_cam));
 
 	mx3_cam->clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(mx3_cam->clk)) {
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index 94ba698d0ad..e8846a09b02 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -59,10 +59,10 @@ MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off).");
 enum { TUNER, AUX1, AUX3, AUX3_YC };
 
 static struct v4l2_input mxb_inputs[MXB_INPUTS] = {
-	{ TUNER,	"Tuner",		V4L2_INPUT_TYPE_TUNER,	1, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ AUX1,		"AUX1",			V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ AUX3,		"AUX3 Composite",	V4L2_INPUT_TYPE_CAMERA,	4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
-	{ AUX3_YC,	"AUX3 S-Video",		V4L2_INPUT_TYPE_CAMERA,	4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+	{ TUNER,	"Tuner",		V4L2_INPUT_TYPE_TUNER,	1, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ AUX1,		"AUX1",			V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ AUX3,		"AUX3 Composite",	V4L2_INPUT_TYPE_CAMERA,	4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
+	{ AUX3_YC,	"AUX3 S-Video",		V4L2_INPUT_TYPE_CAMERA,	4, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0, V4L2_IN_CAP_STD },
 };
 
 /* this array holds the information, which port of the saa7146 each
@@ -185,17 +185,17 @@ static int mxb_probe(struct saa7146_dev *dev)
 	}
 
 	mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			NULL, "saa7111", I2C_SAA7111A, NULL);
+			"saa7111", I2C_SAA7111A, NULL);
 	mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			NULL, "tea6420", I2C_TEA6420_1, NULL);
+			"tea6420", I2C_TEA6420_1, NULL);
 	mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			NULL, "tea6420", I2C_TEA6420_2, NULL);
+			"tea6420", I2C_TEA6420_2, NULL);
 	mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			NULL, "tea6415c", I2C_TEA6415C, NULL);
+			"tea6415c", I2C_TEA6415C, NULL);
 	mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			NULL, "tda9840", I2C_TDA9840, NULL);
+			"tda9840", I2C_TDA9840, NULL);
 	mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
-			NULL, "tuner", I2C_TUNER, NULL);
+			"tuner", I2C_TUNER, NULL);
 
 	/* check if all devices are present */
 	if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 15f8793e325..83de97ad971 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -2230,7 +2230,6 @@ static int __init omap_vout_setup_video_data(struct omap_vout_device *vout)
 
 	strlcpy(vfd->name, VOUT_NAME, sizeof(vfd->name));
 
-	/* need to register for a VID_HARDWARE_* ID in videodev.h */
 	vfd->fops = &omap_vout_fops;
 	vfd->v4l2_dev = &vout->vid_dev->v4l2_dev;
 	mutex_init(&vout->lock);
diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index 7c30e62b50d..0a2fb2bfdbf 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -235,7 +235,7 @@ static void free_buffer(struct videobuf_queue *vq, struct omap1_cam_buf *buf,
 
 	BUG_ON(in_interrupt());
 
-	videobuf_waiton(vb, 0, 0);
+	videobuf_waiton(vq, vb, 0, 0);
 
 	if (vb_mode == OMAP1_CAM_DMA_CONTIG) {
 		videobuf_dma_contig_free(vq, vb);
@@ -504,7 +504,7 @@ static void omap1_videobuf_queue(struct videobuf_queue *vq,
 		 * empty. Since the transfer of the DMA programming register set
 		 * content to the DMA working register set is done automatically
 		 * by the DMA hardware, this can pretty well happen while we
-		 * are keeping the lock here. Levae fetching it from the queue
+		 * are keeping the lock here. Leave fetching it from the queue
 		 * to be done when a next DMA interrupt occures instead.
 		 */
 		return;
@@ -1365,12 +1365,12 @@ static void omap1_cam_init_videobuf(struct videobuf_queue *q,
 		videobuf_queue_dma_contig_init(q, &omap1_videobuf_ops,
 				icd->dev.parent, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-				sizeof(struct omap1_cam_buf), icd);
+				sizeof(struct omap1_cam_buf), icd, &icd->video_lock);
 	else
 		videobuf_queue_sg_init(q, &omap1_videobuf_ops,
 				icd->dev.parent, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-				sizeof(struct omap1_cam_buf), icd);
+				sizeof(struct omap1_cam_buf), icd, &icd->video_lock);
 
 	/* use videobuf mode (auto)selected with the module parameter */
 	pcdev->vb_mode = sg_mode ? OMAP1_CAM_DMA_SG : OMAP1_CAM_DMA_CONTIG;
@@ -1386,7 +1386,7 @@ static void omap1_cam_init_videobuf(struct videobuf_queue *q,
 	}
 }
 
-static int omap1_cam_reqbufs(struct soc_camera_file *icf,
+static int omap1_cam_reqbufs(struct soc_camera_device *icd,
 			      struct v4l2_requestbuffers *p)
 {
 	int i;
@@ -1398,7 +1398,7 @@ static int omap1_cam_reqbufs(struct soc_camera_file *icf,
 	 * it hadn't triggered
 	 */
 	for (i = 0; i < p->count; i++) {
-		struct omap1_cam_buf *buf = container_of(icf->vb_vidq.bufs[i],
+		struct omap1_cam_buf *buf = container_of(icd->vb_vidq.bufs[i],
 						      struct omap1_cam_buf, vb);
 		buf->inwork = 0;
 		INIT_LIST_HEAD(&buf->vb.queue);
@@ -1485,10 +1485,10 @@ static int omap1_cam_set_bus_param(struct soc_camera_device *icd,
 
 static unsigned int omap1_cam_poll(struct file *file, poll_table *pt)
 {
-	struct soc_camera_file *icf = file->private_data;
+	struct soc_camera_device *icd = file->private_data;
 	struct omap1_cam_buf *buf;
 
-	buf = list_entry(icf->vb_vidq.stream.next, struct omap1_cam_buf,
+	buf = list_entry(icd->vb_vidq.stream.next, struct omap1_cam_buf,
 			 vb.stream);
 
 	poll_wait(file, &buf->vb.done, pt);
diff --git a/drivers/media/video/omap24xxcam.c b/drivers/media/video/omap24xxcam.c
index 378b094aff1..01755276290 100644
--- a/drivers/media/video/omap24xxcam.c
+++ b/drivers/media/video/omap24xxcam.c
@@ -1198,7 +1198,7 @@ static int vidioc_streamoff(struct file *file, void *fh, enum v4l2_buf_type i)
 
 	atomic_inc(&cam->reset_disable);
 
-	flush_scheduled_work();
+	flush_work_sync(&cam->sensor_reset_work);
 
 	rval = videobuf_streamoff(q);
 	if (!rval) {
@@ -1512,7 +1512,7 @@ static int omap24xxcam_release(struct file *file)
 
 	atomic_inc(&cam->reset_disable);
 
-	flush_scheduled_work();
+	flush_work_sync(&cam->sensor_reset_work);
 
 	/* stop streaming capture */
 	videobuf_streamoff(&fh->vbq);
@@ -1536,7 +1536,7 @@ static int omap24xxcam_release(struct file *file)
 	 * not be scheduled anymore since streaming is already
 	 * disabled.)
 	 */
-	flush_scheduled_work();
+	flush_work_sync(&cam->sensor_reset_work);
 
 	mutex_lock(&cam->mutex);
 	if (atomic_dec_return(&cam->users) == 0) {
diff --git a/drivers/media/video/ov2640.c b/drivers/media/video/ov2640.c
new file mode 100644
index 00000000000..0cea0cf3667
--- /dev/null
+++ b/drivers/media/video/ov2640.c
@@ -0,0 +1,1205 @@
+/*
+ * ov2640 Camera Driver
+ *
+ * Copyright (C) 2010 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *
+ * Based on ov772x, ov9640 drivers and previous non merged implementations.
+ *
+ * Copyright 2005-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2006, OmniVision
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-chip-ident.h>
+#include <media/v4l2-subdev.h>
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
+
+#define VAL_SET(x, mask, rshift, lshift)  \
+		((((x) >> rshift) & mask) << lshift)
+/*
+ * DSP registers
+ * register offset for BANK_SEL == BANK_SEL_DSP
+ */
+#define R_BYPASS    0x05 /* Bypass DSP */
+#define   R_BYPASS_DSP_BYPAS    0x01 /* Bypass DSP, sensor out directly */
+#define   R_BYPASS_USE_DSP      0x00 /* Use the internal DSP */
+#define QS          0x44 /* Quantization Scale Factor */
+#define CTRLI       0x50
+#define   CTRLI_LP_DP           0x80
+#define   CTRLI_ROUND           0x40
+#define   CTRLI_V_DIV_SET(x)    VAL_SET(x, 0x3, 0, 3)
+#define   CTRLI_H_DIV_SET(x)    VAL_SET(x, 0x3, 0, 0)
+#define HSIZE       0x51 /* H_SIZE[7:0] (real/4) */
+#define   HSIZE_SET(x)          VAL_SET(x, 0xFF, 2, 0)
+#define VSIZE       0x52 /* V_SIZE[7:0] (real/4) */
+#define   VSIZE_SET(x)          VAL_SET(x, 0xFF, 2, 0)
+#define XOFFL       0x53 /* OFFSET_X[7:0] */
+#define   XOFFL_SET(x)          VAL_SET(x, 0xFF, 0, 0)
+#define YOFFL       0x54 /* OFFSET_Y[7:0] */
+#define   YOFFL_SET(x)          VAL_SET(x, 0xFF, 0, 0)
+#define VHYX        0x55 /* Offset and size completion */
+#define   VHYX_VSIZE_SET(x)     VAL_SET(x, 0x1, (8+2), 7)
+#define   VHYX_HSIZE_SET(x)     VAL_SET(x, 0x1, (8+2), 3)
+#define   VHYX_YOFF_SET(x)      VAL_SET(x, 0x3, 8, 4)
+#define   VHYX_XOFF_SET(x)      VAL_SET(x, 0x3, 8, 0)
+#define DPRP        0x56
+#define TEST        0x57 /* Horizontal size completion */
+#define   TEST_HSIZE_SET(x)     VAL_SET(x, 0x1, (9+2), 7)
+#define ZMOW        0x5A /* Zoom: Out Width  OUTW[7:0] (real/4) */
+#define   ZMOW_OUTW_SET(x)      VAL_SET(x, 0xFF, 2, 0)
+#define ZMOH        0x5B /* Zoom: Out Height OUTH[7:0] (real/4) */
+#define   ZMOH_OUTH_SET(x)      VAL_SET(x, 0xFF, 2, 0)
+#define ZMHH        0x5C /* Zoom: Speed and H&W completion */
+#define   ZMHH_ZSPEED_SET(x)    VAL_SET(x, 0x0F, 0, 4)
+#define   ZMHH_OUTH_SET(x)      VAL_SET(x, 0x1, (8+2), 2)
+#define   ZMHH_OUTW_SET(x)      VAL_SET(x, 0x3, (8+2), 0)
+#define BPADDR      0x7C /* SDE Indirect Register Access: Address */
+#define BPDATA      0x7D /* SDE Indirect Register Access: Data */
+#define CTRL2       0x86 /* DSP Module enable 2 */
+#define   CTRL2_DCW_EN          0x20
+#define   CTRL2_SDE_EN          0x10
+#define   CTRL2_UV_ADJ_EN       0x08
+#define   CTRL2_UV_AVG_EN       0x04
+#define   CTRL2_CMX_EN          0x01
+#define CTRL3       0x87 /* DSP Module enable 3 */
+#define   CTRL3_BPC_EN          0x80
+#define   CTRL3_WPC_EN          0x40
+#define SIZEL       0x8C /* Image Size Completion */
+#define   SIZEL_HSIZE8_11_SET(x) VAL_SET(x, 0x1, 11, 6)
+#define   SIZEL_HSIZE8_SET(x)    VAL_SET(x, 0x7, 0, 3)
+#define   SIZEL_VSIZE8_SET(x)    VAL_SET(x, 0x7, 0, 0)
+#define HSIZE8      0xC0 /* Image Horizontal Size HSIZE[10:3] */
+#define   HSIZE8_SET(x)         VAL_SET(x, 0xFF, 3, 0)
+#define VSIZE8      0xC1 /* Image Vertical Size VSIZE[10:3] */
+#define   VSIZE8_SET(x)         VAL_SET(x, 0xFF, 3, 0)
+#define CTRL0       0xC2 /* DSP Module enable 0 */
+#define   CTRL0_AEC_EN       0x80
+#define   CTRL0_AEC_SEL      0x40
+#define   CTRL0_STAT_SEL     0x20
+#define   CTRL0_VFIRST       0x10
+#define   CTRL0_YUV422       0x08
+#define   CTRL0_YUV_EN       0x04
+#define   CTRL0_RGB_EN       0x02
+#define   CTRL0_RAW_EN       0x01
+#define CTRL1       0xC3 /* DSP Module enable 1 */
+#define   CTRL1_CIP          0x80
+#define   CTRL1_DMY          0x40
+#define   CTRL1_RAW_GMA      0x20
+#define   CTRL1_DG           0x10
+#define   CTRL1_AWB          0x08
+#define   CTRL1_AWB_GAIN     0x04
+#define   CTRL1_LENC         0x02
+#define   CTRL1_PRE          0x01
+#define R_DVP_SP    0xD3 /* DVP output speed control */
+#define   R_DVP_SP_AUTO_MODE 0x80
+#define   R_DVP_SP_DVP_MASK  0x3F /* DVP PCLK = sysclk (48)/[6:0] (YUV0);
+				   *          = sysclk (48)/(2*[6:0]) (RAW);*/
+#define IMAGE_MODE  0xDA /* Image Output Format Select */
+#define   IMAGE_MODE_Y8_DVP_EN   0x40
+#define   IMAGE_MODE_JPEG_EN     0x10
+#define   IMAGE_MODE_YUV422      0x00
+#define   IMAGE_MODE_RAW10       0x04 /* (DVP) */
+#define   IMAGE_MODE_RGB565      0x08
+#define   IMAGE_MODE_HREF_VSYNC  0x02 /* HREF timing select in DVP JPEG output
+				       * mode (0 for HREF is same as sensor) */
+#define   IMAGE_MODE_LBYTE_FIRST 0x01 /* Byte swap enable for DVP
+				       *    1: Low byte first UYVY (C2[4] =0)
+				       *        VYUY (C2[4] =1)
+				       *    0: High byte first YUYV (C2[4]=0)
+				       *        YVYU (C2[4] = 1) */
+#define RESET       0xE0 /* Reset */
+#define   RESET_MICROC       0x40
+#define   RESET_SCCB         0x20
+#define   RESET_JPEG         0x10
+#define   RESET_DVP          0x04
+#define   RESET_IPU          0x02
+#define   RESET_CIF          0x01
+#define REGED       0xED /* Register ED */
+#define   REGED_CLK_OUT_DIS  0x10
+#define MS_SP       0xF0 /* SCCB Master Speed */
+#define SS_ID       0xF7 /* SCCB Slave ID */
+#define SS_CTRL     0xF8 /* SCCB Slave Control */
+#define   SS_CTRL_ADD_AUTO_INC  0x20
+#define   SS_CTRL_EN            0x08
+#define   SS_CTRL_DELAY_CLK     0x04
+#define   SS_CTRL_ACC_EN        0x02
+#define   SS_CTRL_SEN_PASS_THR  0x01
+#define MC_BIST     0xF9 /* Microcontroller misc register */
+#define   MC_BIST_RESET           0x80 /* Microcontroller Reset */
+#define   MC_BIST_BOOT_ROM_SEL    0x40
+#define   MC_BIST_12KB_SEL        0x20
+#define   MC_BIST_12KB_MASK       0x30
+#define   MC_BIST_512KB_SEL       0x08
+#define   MC_BIST_512KB_MASK      0x0C
+#define   MC_BIST_BUSY_BIT_R      0x02
+#define   MC_BIST_MC_RES_ONE_SH_W 0x02
+#define   MC_BIST_LAUNCH          0x01
+#define BANK_SEL    0xFF /* Register Bank Select */
+#define   BANK_SEL_DSP     0x00
+#define   BANK_SEL_SENS    0x01
+
+/*
+ * Sensor registers
+ * register offset for BANK_SEL == BANK_SEL_SENS
+ */
+#define GAIN        0x00 /* AGC - Gain control gain setting */
+#define COM1        0x03 /* Common control 1 */
+#define   COM1_1_DUMMY_FR          0x40
+#define   COM1_3_DUMMY_FR          0x80
+#define   COM1_7_DUMMY_FR          0xC0
+#define   COM1_VWIN_LSB_UXGA       0x0F
+#define   COM1_VWIN_LSB_SVGA       0x0A
+#define   COM1_VWIN_LSB_CIF        0x06
+#define REG04       0x04 /* Register 04 */
+#define   REG04_DEF             0x20 /* Always set */
+#define   REG04_HFLIP_IMG       0x80 /* Horizontal mirror image ON/OFF */
+#define   REG04_VFLIP_IMG       0x40 /* Vertical flip image ON/OFF */
+#define   REG04_VREF_EN         0x10
+#define   REG04_HREF_EN         0x08
+#define   REG04_AEC_SET(x)      VAL_SET(x, 0x3, 0, 0)
+#define REG08       0x08 /* Frame Exposure One-pin Control Pre-charge Row Num */
+#define COM2        0x09 /* Common control 2 */
+#define   COM2_SOFT_SLEEP_MODE  0x10 /* Soft sleep mode */
+				     /* Output drive capability */
+#define   COM2_OCAP_Nx_SET(N)   (((N) - 1) & 0x03) /* N = [1x .. 4x] */
+#define PID         0x0A /* Product ID Number MSB */
+#define VER         0x0B /* Product ID Number LSB */
+#define COM3        0x0C /* Common control 3 */
+#define   COM3_BAND_50H        0x04 /* 0 For Banding at 60H */
+#define   COM3_BAND_AUTO       0x02 /* Auto Banding */
+#define   COM3_SING_FR_SNAPSH  0x01 /* 0 For enable live video output after the
+				     * snapshot sequence*/
+#define AEC         0x10 /* AEC[9:2] Exposure Value */
+#define CLKRC       0x11 /* Internal clock */
+#define   CLKRC_EN             0x80
+#define   CLKRC_DIV_SET(x)     (((x) - 1) & 0x1F) /* CLK = XVCLK/(x) */
+#define COM7        0x12 /* Common control 7 */
+#define   COM7_SRST            0x80 /* Initiates system reset. All registers are
+				     * set to factory default values after which
+				     * the chip resumes normal operation */
+#define   COM7_RES_UXGA        0x00 /* Resolution selectors for UXGA */
+#define   COM7_RES_SVGA        0x40 /* SVGA */
+#define   COM7_RES_CIF         0x20 /* CIF */
+#define   COM7_ZOOM_EN         0x04 /* Enable Zoom mode */
+#define   COM7_COLOR_BAR_TEST  0x02 /* Enable Color Bar Test Pattern */
+#define COM8        0x13 /* Common control 8 */
+#define   COM8_DEF             0xC0 /* Banding filter ON/OFF */
+#define   COM8_BNDF_EN         0x20 /* Banding filter ON/OFF */
+#define   COM8_AGC_EN          0x04 /* AGC Auto/Manual control selection */
+#define   COM8_AEC_EN          0x01 /* Auto/Manual Exposure control */
+#define COM9        0x14 /* Common control 9
+			  * Automatic gain ceiling - maximum AGC value [7:5]*/
+#define   COM9_AGC_GAIN_2x     0x00 /* 000 :   2x */
+#define   COM9_AGC_GAIN_4x     0x20 /* 001 :   4x */
+#define   COM9_AGC_GAIN_8x     0x40 /* 010 :   8x */
+#define   COM9_AGC_GAIN_16x    0x60 /* 011 :  16x */
+#define   COM9_AGC_GAIN_32x    0x80 /* 100 :  32x */
+#define   COM9_AGC_GAIN_64x    0xA0 /* 101 :  64x */
+#define   COM9_AGC_GAIN_128x   0xC0 /* 110 : 128x */
+#define COM10       0x15 /* Common control 10 */
+#define   COM10_PCLK_HREF      0x20 /* PCLK output qualified by HREF */
+#define   COM10_PCLK_RISE      0x10 /* Data is updated at the rising edge of
+				     * PCLK (user can latch data at the next
+				     * falling edge of PCLK).
+				     * 0 otherwise. */
+#define   COM10_HREF_INV       0x08 /* Invert HREF polarity:
+				     * HREF negative for valid data*/
+#define   COM10_VSINC_INV      0x02 /* Invert VSYNC polarity */
+#define HSTART      0x17 /* Horizontal Window start MSB 8 bit */
+#define HEND        0x18 /* Horizontal Window end MSB 8 bit */
+#define VSTART      0x19 /* Vertical Window start MSB 8 bit */
+#define VEND        0x1A /* Vertical Window end MSB 8 bit */
+#define MIDH        0x1C /* Manufacturer ID byte - high */
+#define MIDL        0x1D /* Manufacturer ID byte - low  */
+#define AEW         0x24 /* AGC/AEC - Stable operating region (upper limit) */
+#define AEB         0x25 /* AGC/AEC - Stable operating region (lower limit) */
+#define VV          0x26 /* AGC/AEC Fast mode operating region */
+#define   VV_HIGH_TH_SET(x)      VAL_SET(x, 0xF, 0, 4)
+#define   VV_LOW_TH_SET(x)       VAL_SET(x, 0xF, 0, 0)
+#define REG2A       0x2A /* Dummy pixel insert MSB */
+#define FRARL       0x2B /* Dummy pixel insert LSB */
+#define ADDVFL      0x2D /* LSB of insert dummy lines in Vertical direction */
+#define ADDVFH      0x2E /* MSB of insert dummy lines in Vertical direction */
+#define YAVG        0x2F /* Y/G Channel Average value */
+#define REG32       0x32 /* Common Control 32 */
+#define   REG32_PCLK_DIV_2    0x80 /* PCLK freq divided by 2 */
+#define   REG32_PCLK_DIV_4    0xC0 /* PCLK freq divided by 4 */
+#define ARCOM2      0x34 /* Zoom: Horizontal start point */
+#define REG45       0x45 /* Register 45 */
+#define FLL         0x46 /* Frame Length Adjustment LSBs */
+#define FLH         0x47 /* Frame Length Adjustment MSBs */
+#define COM19       0x48 /* Zoom: Vertical start point */
+#define ZOOMS       0x49 /* Zoom: Vertical start point */
+#define COM22       0x4B /* Flash light control */
+#define COM25       0x4E /* For Banding operations */
+#define BD50        0x4F /* 50Hz Banding AEC 8 LSBs */
+#define BD60        0x50 /* 60Hz Banding AEC 8 LSBs */
+#define REG5D       0x5D /* AVGsel[7:0],   16-zone average weight option */
+#define REG5E       0x5E /* AVGsel[15:8],  16-zone average weight option */
+#define REG5F       0x5F /* AVGsel[23:16], 16-zone average weight option */
+#define REG60       0x60 /* AVGsel[31:24], 16-zone average weight option */
+#define HISTO_LOW   0x61 /* Histogram Algorithm Low Level */
+#define HISTO_HIGH  0x62 /* Histogram Algorithm High Level */
+
+/*
+ * ID
+ */
+#define MANUFACTURER_ID	0x7FA2
+#define PID_OV2640	0x2642
+#define VERSION(pid, ver) ((pid << 8) | (ver & 0xFF))
+
+/*
+ * Struct
+ */
+struct regval_list {
+	u8 reg_num;
+	u8 value;
+};
+
+/* Supported resolutions */
+enum ov2640_width {
+	W_QCIF	= 176,
+	W_QVGA	= 320,
+	W_CIF	= 352,
+	W_VGA	= 640,
+	W_SVGA	= 800,
+	W_XGA	= 1024,
+	W_SXGA	= 1280,
+	W_UXGA	= 1600,
+};
+
+enum ov2640_height {
+	H_QCIF	= 144,
+	H_QVGA	= 240,
+	H_CIF	= 288,
+	H_VGA	= 480,
+	H_SVGA	= 600,
+	H_XGA	= 768,
+	H_SXGA	= 1024,
+	H_UXGA	= 1200,
+};
+
+struct ov2640_win_size {
+	char				*name;
+	enum ov2640_width		width;
+	enum ov2640_height		height;
+	const struct regval_list	*regs;
+};
+
+
+struct ov2640_priv {
+	struct v4l2_subdev		subdev;
+	struct ov2640_camera_info	*info;
+	enum v4l2_mbus_pixelcode	cfmt_code;
+	const struct ov2640_win_size	*win;
+	int				model;
+	u16				flag_vflip:1;
+	u16				flag_hflip:1;
+};
+
+/*
+ * Registers settings
+ */
+
+#define ENDMARKER { 0xff, 0xff }
+
+static const struct regval_list ov2640_init_regs[] = {
+	{ BANK_SEL, BANK_SEL_DSP },
+	{ 0x2c,   0xff },
+	{ 0x2e,   0xdf },
+	{ BANK_SEL, BANK_SEL_SENS },
+	{ 0x3c,   0x32 },
+	{ CLKRC, CLKRC_DIV_SET(1) },
+	{ COM2, COM2_OCAP_Nx_SET(3) },
+	{ REG04, REG04_DEF | REG04_HREF_EN },
+	{ COM8,  COM8_DEF | COM8_BNDF_EN | COM8_AGC_EN | COM8_AEC_EN },
+	{ COM9, COM9_AGC_GAIN_8x | 0x08},
+	{ 0x2c,   0x0c },
+	{ 0x33,   0x78 },
+	{ 0x3a,   0x33 },
+	{ 0x3b,   0xfb },
+	{ 0x3e,   0x00 },
+	{ 0x43,   0x11 },
+	{ 0x16,   0x10 },
+	{ 0x39,   0x02 },
+	{ 0x35,   0x88 },
+	{ 0x22,   0x0a },
+	{ 0x37,   0x40 },
+	{ 0x23,   0x00 },
+	{ ARCOM2, 0xa0 },
+	{ 0x06,   0x02 },
+	{ 0x06,   0x88 },
+	{ 0x07,   0xc0 },
+	{ 0x0d,   0xb7 },
+	{ 0x0e,   0x01 },
+	{ 0x4c,   0x00 },
+	{ 0x4a,   0x81 },
+	{ 0x21,   0x99 },
+	{ AEW,    0x40 },
+	{ AEB,    0x38 },
+	{ VV,     VV_HIGH_TH_SET(0x08) | VV_LOW_TH_SET(0x02) },
+	{ 0x5c,   0x00 },
+	{ 0x63,   0x00 },
+	{ FLL,    0x22 },
+	{ COM3,   0x38 | COM3_BAND_AUTO },
+	{ REG5D,  0x55 },
+	{ REG5E,  0x7d },
+	{ REG5F,  0x7d },
+	{ REG60,  0x55 },
+	{ HISTO_LOW,   0x70 },
+	{ HISTO_HIGH,  0x80 },
+	{ 0x7c,   0x05 },
+	{ 0x20,   0x80 },
+	{ 0x28,   0x30 },
+	{ 0x6c,   0x00 },
+	{ 0x6d,   0x80 },
+	{ 0x6e,   0x00 },
+	{ 0x70,   0x02 },
+	{ 0x71,   0x94 },
+	{ 0x73,   0xc1 },
+	{ 0x3d,   0x34 },
+	{ COM7, COM7_RES_UXGA | COM7_ZOOM_EN },
+	{ 0x5a,   0x57 },
+	{ BD50,   0xbb },
+	{ BD60,   0x9c },
+	{ BANK_SEL, BANK_SEL_DSP },
+	{ 0xe5,   0x7f },
+	{ MC_BIST, MC_BIST_RESET | MC_BIST_BOOT_ROM_SEL },
+	{ 0x41,   0x24 },
+	{ RESET, RESET_JPEG | RESET_DVP },
+	{ 0x76,   0xff },
+	{ 0x33,   0xa0 },
+	{ 0x42,   0x20 },
+	{ 0x43,   0x18 },
+	{ 0x4c,   0x00 },
+	{ CTRL3, CTRL3_BPC_EN | CTRL3_WPC_EN | 0x10 },
+	{ 0x88,   0x3f },
+	{ 0xd7,   0x03 },
+	{ 0xd9,   0x10 },
+	{ R_DVP_SP , R_DVP_SP_AUTO_MODE | 0x2 },
+	{ 0xc8,   0x08 },
+	{ 0xc9,   0x80 },
+	{ BPADDR, 0x00 },
+	{ BPDATA, 0x00 },
+	{ BPADDR, 0x03 },
+	{ BPDATA, 0x48 },
+	{ BPDATA, 0x48 },
+	{ BPADDR, 0x08 },
+	{ BPDATA, 0x20 },
+	{ BPDATA, 0x10 },
+	{ BPDATA, 0x0e },
+	{ 0x90,   0x00 },
+	{ 0x91,   0x0e },
+	{ 0x91,   0x1a },
+	{ 0x91,   0x31 },
+	{ 0x91,   0x5a },
+	{ 0x91,   0x69 },
+	{ 0x91,   0x75 },
+	{ 0x91,   0x7e },
+	{ 0x91,   0x88 },
+	{ 0x91,   0x8f },
+	{ 0x91,   0x96 },
+	{ 0x91,   0xa3 },
+	{ 0x91,   0xaf },
+	{ 0x91,   0xc4 },
+	{ 0x91,   0xd7 },
+	{ 0x91,   0xe8 },
+	{ 0x91,   0x20 },
+	{ 0x92,   0x00 },
+	{ 0x93,   0x06 },
+	{ 0x93,   0xe3 },
+	{ 0x93,   0x03 },
+	{ 0x93,   0x03 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x02 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x93,   0x00 },
+	{ 0x96,   0x00 },
+	{ 0x97,   0x08 },
+	{ 0x97,   0x19 },
+	{ 0x97,   0x02 },
+	{ 0x97,   0x0c },
+	{ 0x97,   0x24 },
+	{ 0x97,   0x30 },
+	{ 0x97,   0x28 },
+	{ 0x97,   0x26 },
+	{ 0x97,   0x02 },
+	{ 0x97,   0x98 },
+	{ 0x97,   0x80 },
+	{ 0x97,   0x00 },
+	{ 0x97,   0x00 },
+	{ 0xa4,   0x00 },
+	{ 0xa8,   0x00 },
+	{ 0xc5,   0x11 },
+	{ 0xc6,   0x51 },
+	{ 0xbf,   0x80 },
+	{ 0xc7,   0x10 },
+	{ 0xb6,   0x66 },
+	{ 0xb8,   0xA5 },
+	{ 0xb7,   0x64 },
+	{ 0xb9,   0x7C },
+	{ 0xb3,   0xaf },
+	{ 0xb4,   0x97 },
+	{ 0xb5,   0xFF },
+	{ 0xb0,   0xC5 },
+	{ 0xb1,   0x94 },
+	{ 0xb2,   0x0f },
+	{ 0xc4,   0x5c },
+	{ 0xa6,   0x00 },
+	{ 0xa7,   0x20 },
+	{ 0xa7,   0xd8 },
+	{ 0xa7,   0x1b },
+	{ 0xa7,   0x31 },
+	{ 0xa7,   0x00 },
+	{ 0xa7,   0x18 },
+	{ 0xa7,   0x20 },
+	{ 0xa7,   0xd8 },
+	{ 0xa7,   0x19 },
+	{ 0xa7,   0x31 },
+	{ 0xa7,   0x00 },
+	{ 0xa7,   0x18 },
+	{ 0xa7,   0x20 },
+	{ 0xa7,   0xd8 },
+	{ 0xa7,   0x19 },
+	{ 0xa7,   0x31 },
+	{ 0xa7,   0x00 },
+	{ 0xa7,   0x18 },
+	{ 0x7f,   0x00 },
+	{ 0xe5,   0x1f },
+	{ 0xe1,   0x77 },
+	{ 0xdd,   0x7f },
+	{ CTRL0,  CTRL0_YUV422 | CTRL0_YUV_EN | CTRL0_RGB_EN },
+	ENDMARKER,
+};
+
+/*
+ * Register settings for window size
+ * The preamble, setup the internal DSP to input an UXGA (1600x1200) image.
+ * Then the different zooming configurations will setup the output image size.
+ */
+static const struct regval_list ov2640_size_change_preamble_regs[] = {
+	{ BANK_SEL, BANK_SEL_DSP },
+	{ RESET, RESET_DVP },
+	{ HSIZE8, HSIZE8_SET(W_UXGA) },
+	{ VSIZE8, VSIZE8_SET(H_UXGA) },
+	{ CTRL2, CTRL2_DCW_EN | CTRL2_SDE_EN |
+		 CTRL2_UV_AVG_EN | CTRL2_CMX_EN | CTRL2_UV_ADJ_EN },
+	{ HSIZE, HSIZE_SET(W_UXGA) },
+	{ VSIZE, VSIZE_SET(H_UXGA) },
+	{ XOFFL, XOFFL_SET(0) },
+	{ YOFFL, YOFFL_SET(0) },
+	{ VHYX, VHYX_HSIZE_SET(W_UXGA) | VHYX_VSIZE_SET(H_UXGA) |
+		VHYX_XOFF_SET(0) | VHYX_YOFF_SET(0)},
+	{ TEST, TEST_HSIZE_SET(W_UXGA) },
+	ENDMARKER,
+};
+
+#define PER_SIZE_REG_SEQ(x, y, v_div, h_div, pclk_div)	\
+	{ CTRLI, CTRLI_LP_DP | CTRLI_V_DIV_SET(v_div) |	\
+		 CTRLI_H_DIV_SET(h_div)},		\
+	{ ZMOW, ZMOW_OUTW_SET(x) },			\
+	{ ZMOH, ZMOH_OUTH_SET(y) },			\
+	{ ZMHH, ZMHH_OUTW_SET(x) | ZMHH_OUTH_SET(y) },	\
+	{ R_DVP_SP, pclk_div },				\
+	{ RESET, 0x00}
+
+static const struct regval_list ov2640_qcif_regs[] = {
+	PER_SIZE_REG_SEQ(W_QCIF, H_QCIF, 3, 3, 4),
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_qvga_regs[] = {
+	PER_SIZE_REG_SEQ(W_QVGA, H_QVGA, 2, 2, 4),
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_cif_regs[] = {
+	PER_SIZE_REG_SEQ(W_CIF, H_CIF, 2, 2, 8),
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_vga_regs[] = {
+	PER_SIZE_REG_SEQ(W_VGA, H_VGA, 0, 0, 2),
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_svga_regs[] = {
+	PER_SIZE_REG_SEQ(W_SVGA, H_SVGA, 1, 1, 2),
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_xga_regs[] = {
+	PER_SIZE_REG_SEQ(W_XGA, H_XGA, 0, 0, 2),
+	{ CTRLI,    0x00},
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_sxga_regs[] = {
+	PER_SIZE_REG_SEQ(W_SXGA, H_SXGA, 0, 0, 2),
+	{ CTRLI,    0x00},
+	{ R_DVP_SP, 2 | R_DVP_SP_AUTO_MODE },
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_uxga_regs[] = {
+	PER_SIZE_REG_SEQ(W_UXGA, H_UXGA, 0, 0, 0),
+	{ CTRLI,    0x00},
+	{ R_DVP_SP, 0 | R_DVP_SP_AUTO_MODE },
+	ENDMARKER,
+};
+
+#define OV2640_SIZE(n, w, h, r) \
+	{.name = n, .width = w , .height = h, .regs = r }
+
+static const struct ov2640_win_size ov2640_supported_win_sizes[] = {
+	OV2640_SIZE("QCIF", W_QCIF, H_QCIF, ov2640_qcif_regs),
+	OV2640_SIZE("QVGA", W_QVGA, H_QVGA, ov2640_qvga_regs),
+	OV2640_SIZE("CIF", W_CIF, H_CIF, ov2640_cif_regs),
+	OV2640_SIZE("VGA", W_VGA, H_VGA, ov2640_vga_regs),
+	OV2640_SIZE("SVGA", W_SVGA, H_SVGA, ov2640_svga_regs),
+	OV2640_SIZE("XGA", W_XGA, H_XGA, ov2640_xga_regs),
+	OV2640_SIZE("SXGA", W_SXGA, H_SXGA, ov2640_sxga_regs),
+	OV2640_SIZE("UXGA", W_UXGA, H_UXGA, ov2640_uxga_regs),
+};
+
+/*
+ * Register settings for pixel formats
+ */
+static const struct regval_list ov2640_format_change_preamble_regs[] = {
+	{ BANK_SEL, BANK_SEL_DSP },
+	{ R_BYPASS, R_BYPASS_USE_DSP },
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_yuv422_regs[] = {
+	{ IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_YUV422 },
+	{ 0xD7, 0x01 },
+	{ 0x33, 0xa0 },
+	{ 0xe1, 0x67 },
+	{ RESET,  0x00 },
+	{ R_BYPASS, R_BYPASS_USE_DSP },
+	ENDMARKER,
+};
+
+static const struct regval_list ov2640_rgb565_regs[] = {
+	{ IMAGE_MODE, IMAGE_MODE_LBYTE_FIRST | IMAGE_MODE_RGB565 },
+	{ 0xd7, 0x03 },
+	{ RESET,  0x00 },
+	{ R_BYPASS, R_BYPASS_USE_DSP },
+	ENDMARKER,
+};
+
+static enum v4l2_mbus_pixelcode ov2640_codes[] = {
+	V4L2_MBUS_FMT_UYVY8_2X8,
+	V4L2_MBUS_FMT_RGB565_2X8_LE,
+};
+
+/*
+ * Supported controls
+ */
+static const struct v4l2_queryctrl ov2640_controls[] = {
+	{
+		.id		= V4L2_CID_VFLIP,
+		.type		= V4L2_CTRL_TYPE_BOOLEAN,
+		.name		= "Flip Vertically",
+		.minimum	= 0,
+		.maximum	= 1,
+		.step		= 1,
+		.default_value	= 0,
+	}, {
+		.id		= V4L2_CID_HFLIP,
+		.type		= V4L2_CTRL_TYPE_BOOLEAN,
+		.name		= "Flip Horizontally",
+		.minimum	= 0,
+		.maximum	= 1,
+		.step		= 1,
+		.default_value	= 0,
+	},
+};
+
+/*
+ * General functions
+ */
+static struct ov2640_priv *to_ov2640(const struct i2c_client *client)
+{
+	return container_of(i2c_get_clientdata(client), struct ov2640_priv,
+			    subdev);
+}
+
+static int ov2640_write_array(struct i2c_client *client,
+			      const struct regval_list *vals)
+{
+	int ret;
+
+	while ((vals->reg_num != 0xff) || (vals->value != 0xff)) {
+		ret = i2c_smbus_write_byte_data(client,
+						vals->reg_num, vals->value);
+		dev_vdbg(&client->dev, "array: 0x%02x, 0x%02x",
+			 vals->reg_num, vals->value);
+
+		if (ret < 0)
+			return ret;
+		vals++;
+	}
+	return 0;
+}
+
+static int ov2640_mask_set(struct i2c_client *client,
+			   u8  reg, u8  mask, u8  set)
+{
+	s32 val = i2c_smbus_read_byte_data(client, reg);
+	if (val < 0)
+		return val;
+
+	val &= ~mask;
+	val |= set & mask;
+
+	dev_vdbg(&client->dev, "masks: 0x%02x, 0x%02x", reg, val);
+
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static int ov2640_reset(struct i2c_client *client)
+{
+	int ret;
+	const struct regval_list reset_seq[] = {
+		{BANK_SEL, BANK_SEL_SENS},
+		{COM7, COM7_SRST},
+		ENDMARKER,
+	};
+
+	ret = ov2640_write_array(client, reset_seq);
+	if (ret)
+		goto err;
+
+	msleep(5);
+err:
+	dev_dbg(&client->dev, "%s: (ret %d)", __func__, ret);
+	return ret;
+}
+
+/*
+ * soc_camera_ops functions
+ */
+static int ov2640_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	return 0;
+}
+
+static int ov2640_set_bus_param(struct soc_camera_device *icd,
+				unsigned long flags)
+{
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK;
+
+	/* Only one width bit may be set */
+	if (!is_power_of_2(width_flag))
+		return -EINVAL;
+
+	if (icl->set_bus_param)
+		return icl->set_bus_param(icl, width_flag);
+
+	/*
+	 * Without board specific bus width settings we support only the
+	 * sensors native bus width witch are tested working
+	 */
+	if (width_flag & (SOCAM_DATAWIDTH_10 | SOCAM_DATAWIDTH_8))
+		return 0;
+
+	return 0;
+}
+
+static unsigned long ov2640_query_bus_param(struct soc_camera_device *icd)
+{
+	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
+		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
+		SOCAM_DATA_ACTIVE_HIGH;
+
+	if (icl->query_bus_param)
+		flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
+	else
+		flags |= SOCAM_DATAWIDTH_10;
+
+	return soc_camera_apply_sensor_flags(icl, flags);
+}
+
+static int ov2640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct i2c_client  *client = v4l2_get_subdevdata(sd);
+	struct ov2640_priv *priv = to_ov2640(client);
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		ctrl->value = priv->flag_vflip;
+		break;
+	case V4L2_CID_HFLIP:
+		ctrl->value = priv->flag_hflip;
+		break;
+	}
+	return 0;
+}
+
+static int ov2640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct i2c_client  *client = v4l2_get_subdevdata(sd);
+	struct ov2640_priv *priv = to_ov2640(client);
+	int ret = 0;
+	u8 val;
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		val = ctrl->value ? REG04_VFLIP_IMG : 0x00;
+		priv->flag_vflip = ctrl->value ? 1 : 0;
+		ret = ov2640_mask_set(client, REG04, REG04_VFLIP_IMG, val);
+		break;
+	case V4L2_CID_HFLIP:
+		val = ctrl->value ? REG04_HFLIP_IMG : 0x00;
+		priv->flag_hflip = ctrl->value ? 1 : 0;
+		ret = ov2640_mask_set(client, REG04, REG04_HFLIP_IMG, val);
+		break;
+	}
+
+	return ret;
+}
+
+static int ov2640_g_chip_ident(struct v4l2_subdev *sd,
+			       struct v4l2_dbg_chip_ident *id)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov2640_priv *priv = to_ov2640(client);
+
+	id->ident    = priv->model;
+	id->revision = 0;
+
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov2640_g_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+
+	reg->size = 1;
+	if (reg->reg > 0xff)
+		return -EINVAL;
+
+	ret = i2c_smbus_read_byte_data(client, reg->reg);
+	if (ret < 0)
+		return ret;
+
+	reg->val = ret;
+
+	return 0;
+}
+
+static int ov2640_s_register(struct v4l2_subdev *sd,
+			     struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (reg->reg > 0xff ||
+	    reg->val > 0xff)
+		return -EINVAL;
+
+	return i2c_smbus_write_byte_data(client, reg->reg, reg->val);
+}
+#endif
+
+/* Select the nearest higher resolution for capture */
+static const struct ov2640_win_size *ov2640_select_win(u32 *width, u32 *height)
+{
+	int i, default_size = ARRAY_SIZE(ov2640_supported_win_sizes) - 1;
+
+	for (i = 0; i < ARRAY_SIZE(ov2640_supported_win_sizes); i++) {
+		if (ov2640_supported_win_sizes[i].width  >= *width &&
+		    ov2640_supported_win_sizes[i].height >= *height) {
+			*width = ov2640_supported_win_sizes[i].width;
+			*height = ov2640_supported_win_sizes[i].height;
+			return &ov2640_supported_win_sizes[i];
+		}
+	}
+
+	*width = ov2640_supported_win_sizes[default_size].width;
+	*height = ov2640_supported_win_sizes[default_size].height;
+	return &ov2640_supported_win_sizes[default_size];
+}
+
+static int ov2640_set_params(struct i2c_client *client, u32 *width, u32 *height,
+			     enum v4l2_mbus_pixelcode code)
+{
+	struct ov2640_priv       *priv = to_ov2640(client);
+	const struct regval_list *selected_cfmt_regs;
+	int ret;
+
+	/* select win */
+	priv->win = ov2640_select_win(width, height);
+
+	/* select format */
+	priv->cfmt_code = 0;
+	switch (code) {
+	case V4L2_MBUS_FMT_RGB565_2X8_LE:
+		dev_dbg(&client->dev, "%s: Selected cfmt RGB565", __func__);
+		selected_cfmt_regs = ov2640_rgb565_regs;
+		break;
+	default:
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		dev_dbg(&client->dev, "%s: Selected cfmt YUV422", __func__);
+		selected_cfmt_regs = ov2640_yuv422_regs;
+	}
+
+	/* reset hardware */
+	ov2640_reset(client);
+
+	/* initialize the sensor with default data */
+	dev_dbg(&client->dev, "%s: Init default", __func__);
+	ret = ov2640_write_array(client, ov2640_init_regs);
+	if (ret < 0)
+		goto err;
+
+	/* select preamble */
+	dev_dbg(&client->dev, "%s: Set size to %s", __func__, priv->win->name);
+	ret = ov2640_write_array(client, ov2640_size_change_preamble_regs);
+	if (ret < 0)
+		goto err;
+
+	/* set size win */
+	ret = ov2640_write_array(client, priv->win->regs);
+	if (ret < 0)
+		goto err;
+
+	/* cfmt preamble */
+	dev_dbg(&client->dev, "%s: Set cfmt", __func__);
+	ret = ov2640_write_array(client, ov2640_format_change_preamble_regs);
+	if (ret < 0)
+		goto err;
+
+	/* set cfmt */
+	ret = ov2640_write_array(client, selected_cfmt_regs);
+	if (ret < 0)
+		goto err;
+
+	priv->cfmt_code = code;
+	*width = priv->win->width;
+	*height = priv->win->height;
+
+	return 0;
+
+err:
+	dev_err(&client->dev, "%s: Error %d", __func__, ret);
+	ov2640_reset(client);
+	priv->win = NULL;
+
+	return ret;
+}
+
+static int ov2640_g_fmt(struct v4l2_subdev *sd,
+			struct v4l2_mbus_framefmt *mf)
+{
+	struct i2c_client  *client = v4l2_get_subdevdata(sd);
+	struct ov2640_priv *priv = to_ov2640(client);
+
+	if (!priv->win) {
+		u32 width = W_SVGA, height = H_SVGA;
+		int ret = ov2640_set_params(client, &width, &height,
+					    V4L2_MBUS_FMT_UYVY8_2X8);
+		if (ret < 0)
+			return ret;
+	}
+
+	mf->width	= priv->win->width;
+	mf->height	= priv->win->height;
+	mf->code	= priv->cfmt_code;
+
+	switch (mf->code) {
+	case V4L2_MBUS_FMT_RGB565_2X8_LE:
+		mf->colorspace = V4L2_COLORSPACE_SRGB;
+		break;
+	default:
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		mf->colorspace = V4L2_COLORSPACE_JPEG;
+	}
+	mf->field	= V4L2_FIELD_NONE;
+
+	return 0;
+}
+
+static int ov2640_s_fmt(struct v4l2_subdev *sd,
+			struct v4l2_mbus_framefmt *mf)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+
+
+	switch (mf->code) {
+	case V4L2_MBUS_FMT_RGB565_2X8_LE:
+		mf->colorspace = V4L2_COLORSPACE_SRGB;
+		break;
+	default:
+		mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		mf->colorspace = V4L2_COLORSPACE_JPEG;
+	}
+
+	ret = ov2640_set_params(client, &mf->width, &mf->height, mf->code);
+
+	return ret;
+}
+
+static int ov2640_try_fmt(struct v4l2_subdev *sd,
+			  struct v4l2_mbus_framefmt *mf)
+{
+	const struct ov2640_win_size *win;
+
+	/*
+	 * select suitable win
+	 */
+	win = ov2640_select_win(&mf->width, &mf->height);
+
+	mf->field	= V4L2_FIELD_NONE;
+
+	switch (mf->code) {
+	case V4L2_MBUS_FMT_RGB565_2X8_LE:
+		mf->colorspace = V4L2_COLORSPACE_SRGB;
+		break;
+	default:
+		mf->code = V4L2_MBUS_FMT_UYVY8_2X8;
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		mf->colorspace = V4L2_COLORSPACE_JPEG;
+	}
+
+	return 0;
+}
+
+static int ov2640_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
+			   enum v4l2_mbus_pixelcode *code)
+{
+	if (index >= ARRAY_SIZE(ov2640_codes))
+		return -EINVAL;
+
+	*code = ov2640_codes[index];
+	return 0;
+}
+
+static int ov2640_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
+{
+	a->c.left	= 0;
+	a->c.top	= 0;
+	a->c.width	= W_UXGA;
+	a->c.height	= H_UXGA;
+	a->type		= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+
+	return 0;
+}
+
+static int ov2640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
+{
+	a->bounds.left			= 0;
+	a->bounds.top			= 0;
+	a->bounds.width			= W_UXGA;
+	a->bounds.height		= H_UXGA;
+	a->defrect			= a->bounds;
+	a->type				= V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	a->pixelaspect.numerator	= 1;
+	a->pixelaspect.denominator	= 1;
+
+	return 0;
+}
+
+static int ov2640_video_probe(struct soc_camera_device *icd,
+			      struct i2c_client *client)
+{
+	struct ov2640_priv *priv = to_ov2640(client);
+	u8 pid, ver, midh, midl;
+	const char *devname;
+	int ret;
+
+	/*
+	 * we must have a parent by now. And it cannot be a wrong one.
+	 * So this entire test is completely redundant.
+	 */
+	if (!icd->dev.parent ||
+	    to_soc_camera_host(icd->dev.parent)->nr != icd->iface) {
+		dev_err(&client->dev, "Parent missing or invalid!\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	/*
+	 * check and show product ID and manufacturer ID
+	 */
+	i2c_smbus_write_byte_data(client, BANK_SEL, BANK_SEL_SENS);
+	pid  = i2c_smbus_read_byte_data(client, PID);
+	ver  = i2c_smbus_read_byte_data(client, VER);
+	midh = i2c_smbus_read_byte_data(client, MIDH);
+	midl = i2c_smbus_read_byte_data(client, MIDL);
+
+	switch (VERSION(pid, ver)) {
+	case PID_OV2640:
+		devname     = "ov2640";
+		priv->model = V4L2_IDENT_OV2640;
+		break;
+	default:
+		dev_err(&client->dev,
+			"Product ID error %x:%x\n", pid, ver);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	dev_info(&client->dev,
+		 "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
+		 devname, pid, ver, midh, midl);
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static struct soc_camera_ops ov2640_ops = {
+	.set_bus_param		= ov2640_set_bus_param,
+	.query_bus_param	= ov2640_query_bus_param,
+	.controls		= ov2640_controls,
+	.num_controls		= ARRAY_SIZE(ov2640_controls),
+};
+
+static struct v4l2_subdev_core_ops ov2640_subdev_core_ops = {
+	.g_ctrl		= ov2640_g_ctrl,
+	.s_ctrl		= ov2640_s_ctrl,
+	.g_chip_ident	= ov2640_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register	= ov2640_g_register,
+	.s_register	= ov2640_s_register,
+#endif
+};
+
+static struct v4l2_subdev_video_ops ov2640_subdev_video_ops = {
+	.s_stream	= ov2640_s_stream,
+	.g_mbus_fmt	= ov2640_g_fmt,
+	.s_mbus_fmt	= ov2640_s_fmt,
+	.try_mbus_fmt	= ov2640_try_fmt,
+	.cropcap	= ov2640_cropcap,
+	.g_crop		= ov2640_g_crop,
+	.enum_mbus_fmt	= ov2640_enum_fmt,
+};
+
+static struct v4l2_subdev_ops ov2640_subdev_ops = {
+	.core	= &ov2640_subdev_core_ops,
+	.video	= &ov2640_subdev_video_ops,
+};
+
+/*
+ * i2c_driver functions
+ */
+static int ov2640_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+{
+	struct ov2640_priv        *priv;
+	struct soc_camera_device  *icd = client->dev.platform_data;
+	struct i2c_adapter        *adapter = to_i2c_adapter(client->dev.parent);
+	struct soc_camera_link    *icl;
+	int                        ret;
+
+	if (!icd) {
+		dev_err(&adapter->dev, "OV2640: missing soc-camera data!\n");
+		return -EINVAL;
+	}
+
+	icl = to_soc_camera_link(icd);
+	if (!icl) {
+		dev_err(&adapter->dev,
+			"OV2640: Missing platform_data for driver\n");
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&adapter->dev,
+			"OV2640: I2C-Adapter doesn't support SMBUS\n");
+		return -EIO;
+	}
+
+	priv = kzalloc(sizeof(struct ov2640_priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&adapter->dev,
+			"Failed to allocate memory for private data!\n");
+		return -ENOMEM;
+	}
+
+	priv->info = icl->priv;
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &ov2640_subdev_ops);
+
+	icd->ops = &ov2640_ops;
+
+	ret = ov2640_video_probe(icd, client);
+	if (ret) {
+		icd->ops = NULL;
+		kfree(priv);
+	} else {
+		dev_info(&adapter->dev, "OV2640 Probed\n");
+	}
+
+	return ret;
+}
+
+static int ov2640_remove(struct i2c_client *client)
+{
+	struct ov2640_priv       *priv = to_ov2640(client);
+	struct soc_camera_device *icd = client->dev.platform_data;
+
+	icd->ops = NULL;
+	kfree(priv);
+	return 0;
+}
+
+static const struct i2c_device_id ov2640_id[] = {
+	{ "ov2640", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ov2640_id);
+
+static struct i2c_driver ov2640_i2c_driver = {
+	.driver = {
+		.name = "ov2640",
+	},
+	.probe    = ov2640_probe,
+	.remove   = ov2640_remove,
+	.id_table = ov2640_id,
+};
+
+/*
+ * Module functions
+ */
+static int __init ov2640_module_init(void)
+{
+	return i2c_add_driver(&ov2640_i2c_driver);
+}
+
+static void __exit ov2640_module_exit(void)
+{
+	i2c_del_driver(&ov2640_i2c_driver);
+}
+
+module_init(ov2640_module_init);
+module_exit(ov2640_module_exit);
+
+MODULE_DESCRIPTION("SoC Camera driver for Omni Vision 2640 sensor");
+MODULE_AUTHOR("Alberto Panizzo");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c
index b7cfeab0948..cf93de98806 100644
--- a/drivers/media/video/ov6650.c
+++ b/drivers/media/video/ov6650.c
@@ -754,7 +754,7 @@ static int ov6650_g_fmt(struct v4l2_subdev *sd,
 
 static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
 {
-	return (width > rect->width >> 1 || height > rect->height >> 1);
+	return width > rect->width >> 1 || height > rect->height >> 1;
 }
 
 static u8 to_clkrc(struct v4l2_fract *timeperframe,
@@ -840,8 +840,6 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
 		coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP;
 		coma_set |= COMA_RAW_RGB | COMA_RGB;
 		break;
-	case 0:
-		break;
 	default:
 		dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code);
 		return -EINVAL;
@@ -1176,7 +1174,6 @@ static int ov6650_probe(struct i2c_client *client,
 
 	if (ret) {
 		icd->ops = NULL;
-		i2c_set_clientdata(client, NULL);
 		kfree(priv);
 	}
 
@@ -1187,7 +1184,6 @@ static int ov6650_remove(struct i2c_client *client)
 {
 	struct ov6650 *priv = to_ov6650(client);
 
-	i2c_set_clientdata(client, NULL);
 	kfree(priv);
 	return 0;
 }
diff --git a/drivers/media/video/ov772x.c b/drivers/media/video/ov772x.c
index a84b770352f..48895ef863f 100644
--- a/drivers/media/video/ov772x.c
+++ b/drivers/media/video/ov772x.c
@@ -600,7 +600,7 @@ static int ov772x_reset(struct i2c_client *client)
 static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 
 	if (!enable) {
 		ov772x_mask_set(client, COM2, SOFT_SLEEP_MODE, SOFT_SLEEP_MODE);
@@ -645,8 +645,7 @@ static unsigned long ov772x_query_bus_param(struct soc_camera_device *icd)
 
 static int ov772x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
@@ -665,7 +664,7 @@ static int ov772x_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int ov772x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 	int ret = 0;
 	u8 val;
 
@@ -715,8 +714,7 @@ static int ov772x_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int ov772x_g_chip_ident(struct v4l2_subdev *sd,
 			       struct v4l2_dbg_chip_ident *id)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 
 	id->ident    = priv->model;
 	id->revision = 0;
@@ -955,7 +953,7 @@ static int ov772x_g_fmt(struct v4l2_subdev *sd,
 			struct v4l2_mbus_framefmt *mf)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 
 	if (!priv->win || !priv->cfmt) {
 		u32 width = VGA_WIDTH, height = VGA_HEIGHT;
@@ -978,7 +976,7 @@ static int ov772x_s_fmt(struct v4l2_subdev *sd,
 			struct v4l2_mbus_framefmt *mf)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 	int ret = ov772x_set_params(client, &mf->width, &mf->height,
 				    mf->code);
 
@@ -991,8 +989,7 @@ static int ov772x_s_fmt(struct v4l2_subdev *sd,
 static int ov772x_try_fmt(struct v4l2_subdev *sd,
 			  struct v4l2_mbus_framefmt *mf)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov772x_priv *priv = to_ov772x(client);
+	struct ov772x_priv *priv = container_of(sd, struct ov772x_priv, subdev);
 	const struct ov772x_win_size *win;
 	int i;
 
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 99e9e1d3c83..53d88a2ab92 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -31,6 +31,8 @@
 
 #include "ov9640.h"
 
+#define to_ov9640_sensor(sd)	container_of(sd, struct ov9640_priv, subdev)
+
 /* default register setup */
 static const struct ov9640_reg ov9640_regs_dflt[] = {
 	{ OV9640_COM5,	OV9640_COM5_SYSCLK | OV9640_COM5_LONGEXP },
@@ -308,9 +310,7 @@ static unsigned long ov9640_query_bus_param(struct soc_camera_device *icd)
 /* Get status of additional camera capabilities */
 static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov9640_priv *priv = container_of(i2c_get_clientdata(client),
-					struct ov9640_priv, subdev);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
@@ -327,8 +327,7 @@ static int ov9640_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov9640_priv *priv = container_of(i2c_get_clientdata(client),
-					struct ov9640_priv, subdev);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 
 	int ret = 0;
 
@@ -360,9 +359,7 @@ static int ov9640_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 static int ov9640_g_chip_ident(struct v4l2_subdev *sd,
 				struct v4l2_dbg_chip_ident *id)
 {
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	struct ov9640_priv *priv = container_of(i2c_get_clientdata(client),
-					struct ov9640_priv, subdev);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 
 	id->ident	= priv->model;
 	id->revision	= priv->revision;
@@ -654,7 +651,8 @@ static int ov9640_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
 static int ov9640_video_probe(struct soc_camera_device *icd,
 				struct i2c_client *client)
 {
-	struct ov9640_priv *priv = i2c_get_clientdata(client);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 	u8		pid, ver, midh, midl;
 	const char	*devname;
 	int		ret = 0;
@@ -791,7 +789,8 @@ static int ov9640_probe(struct i2c_client *client,
 
 static int ov9640_remove(struct i2c_client *client)
 {
-	struct ov9640_priv *priv = i2c_get_clientdata(client);
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
 
 	kfree(priv);
 	return 0;
diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index 7129b50757d..7551907f8c2 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -932,7 +932,7 @@ static ssize_t pms_read(struct file *file, char __user *buf,
 
 static const struct v4l2_file_operations pms_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.read           = pms_read,
 };
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
index 55ea914c7fc..7d5a7139a45 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c
@@ -203,7 +203,7 @@ int pvr2_ctrl_get_valname(struct pvr2_ctrl *cptr,int val,
 	*blen = 0;
 	LOCK_TAKE(cptr->hdw->big_lock); do {
 		if (cptr->info->type == pvr2_ctl_enum) {
-			const char **names;
+			const char * const *names;
 			names = cptr->info->def.type_enum.value_names;
 			if (pvr2_ctrl_range_check(cptr,val) == 0) {
 				if (names[val]) {
@@ -367,7 +367,7 @@ static const char *boolNames[] = {
 
 static int parse_token(const char *ptr,unsigned int len,
 		       int *valptr,
-		       const char **names,unsigned int namecnt)
+		       const char * const *names, unsigned int namecnt)
 {
 	char buf[33];
 	unsigned int slen;
@@ -559,7 +559,7 @@ int pvr2_ctrl_value_to_sym_internal(struct pvr2_ctrl *cptr,
 		*len = scnprintf(buf,maxlen,"%s",val ? "true" : "false");
 		ret = 0;
 	} else if (cptr->info->type == pvr2_ctl_enum) {
-		const char **names;
+		const char * const *names;
 		names = cptr->info->def.type_enum.value_names;
 		if ((val >= 0) &&
 		    (val < cptr->info->def.type_enum.count)) {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
index cb4057bb07a..ac94a8bf883 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h
@@ -115,7 +115,7 @@ struct pvr2_ctl_info {
 		} type_int;
 		struct { /* enumerated control */
 			unsigned int count;       /* enum value count */
-			const char **value_names; /* symbol names */
+			const char * const *value_names; /* symbol names */
 		} type_enum;
 		struct { /* bitmask control */
 			unsigned int valid_bits; /* bits in use */
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index bef202752cc..66ad516bdfd 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -2088,16 +2088,14 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
 			   " Setting up with specified i2c address 0x%x",
 			   mid, i2caddr[0]);
 		sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
-					 NULL, fname,
-					 i2caddr[0], NULL);
+					 fname, i2caddr[0], NULL);
 	} else {
 		pvr2_trace(PVR2_TRACE_INIT,
 			   "Module ID %u:"
 			   " Setting up with address probe list",
 			   mid);
 		sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
-						NULL, fname,
-						0, i2caddr);
+					 fname, 0, i2caddr);
 	}
 
 	if (!sd) {
diff --git a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
index 3d7e5aab547..281806b2df6 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-sysfs.c
@@ -647,7 +647,7 @@ static void class_dev_create(struct pvr2_sysfs *sfp,
 	if (ret) {
 		pvr2_trace(PVR2_TRACE_ERROR_LEGS,
 			   "device_register failed");
-		kfree(class_dev);
+		put_device(class_dev);
 		return;
 	}
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
index aaafa0398fd..58617fc656c 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c
@@ -852,8 +852,8 @@ static long pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 #endif
 
 	default :
-		ret = v4l_compat_translate_ioctl(file, cmd,
-						 arg, pvr2_v4l2_do_ioctl);
+		ret = -EINVAL;
+		break;
 	}
 
 	pvr2_hdw_commit_ctl(hdw);
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 6b8fbddc074..1593f8deb81 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -1386,11 +1386,16 @@ long pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 	{
 		ARG_DEF(int, qual)
 
+		if (pdev->iso_init) {
+			ret = -EBUSY;
+			break;
+		}
+
 		ARG_IN(qual)
 		if (ARGR(qual) < 0 || ARGR(qual) > 3)
 			ret = -EINVAL;
 		else
-			ret = pwc_try_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
+			ret = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, ARGR(qual), pdev->vsnapshot);
 		if (ret >= 0)
 			pdev->vcompression = ARGR(qual);
 		break;
diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c
index e62beb4efdb..bd1519a4ecb 100644
--- a/drivers/media/video/pwc/pwc-if.c
+++ b/drivers/media/video/pwc/pwc-if.c
@@ -62,7 +62,6 @@
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #ifdef CONFIG_USB_PWC_INPUT_EVDEV
 #include <linux/usb/input.h>
 #endif
@@ -288,14 +287,13 @@ static int pwc_allocate_buffers(struct pwc_device *pdev)
 	/* create frame buffers, and make circular ring */
 	for (i = 0; i < default_fbufs; i++) {
 		if (pdev->fbuf[i].data == NULL) {
-			kbuf = vmalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */
+			kbuf = vzalloc(PWC_FRAME_SIZE); /* need vmalloc since frame buffer > 128K */
 			if (kbuf == NULL) {
 				PWC_ERROR("Failed to allocate frame buffer %d.\n", i);
 				return -ENOMEM;
 			}
 			PWC_DEBUG_MEMORY("Allocated frame buffer %d at %p.\n", i, kbuf);
 			pdev->fbuf[i].data = kbuf;
-			memset(kbuf, 0, PWC_FRAME_SIZE);
 		}
 	}
 
@@ -900,10 +898,13 @@ int pwc_isoc_init(struct pwc_device *pdev)
 	/* link */
 	for (i = 0; i < MAX_ISO_BUFS; i++) {
 		ret = usb_submit_urb(pdev->sbuf[i].urb, GFP_KERNEL);
-		if (ret)
+		if (ret) {
 			PWC_ERROR("isoc_init() submit_urb %d failed with error %d\n", i, ret);
-		else
-			PWC_DEBUG_MEMORY("URB 0x%p submitted.\n", pdev->sbuf[i].urb);
+			pdev->iso_init = 1;
+			pwc_isoc_cleanup(pdev);
+			return ret;
+		}
+		PWC_DEBUG_MEMORY("URB 0x%p submitted.\n", pdev->sbuf[i].urb);
 	}
 
 	/* All is done... */
@@ -959,7 +960,7 @@ void pwc_isoc_cleanup(struct pwc_device *pdev)
 	/* Stop camera, but only if we are sure the camera is still there (unplug
 	   is signalled by EPIPE)
 	 */
-	if (pdev->error_status && pdev->error_status != EPIPE) {
+	if (pdev->error_status != EPIPE) {
 		PWC_DEBUG_OPEN("Setting alternate interface 0.\n");
 		usb_set_interface(pdev->udev, 0, 0);
 	}
@@ -968,36 +969,6 @@ void pwc_isoc_cleanup(struct pwc_device *pdev)
 	PWC_DEBUG_OPEN("<< pwc_isoc_cleanup()\n");
 }
 
-int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot)
-{
-	int ret, start;
-
-	/* Stop isoc stuff */
-	pwc_isoc_cleanup(pdev);
-	/* Reset parameters */
-	pwc_reset_buffers(pdev);
-	/* Try to set video mode... */
-	start = ret = pwc_set_video_mode(pdev, width, height, new_fps, new_compression, new_snapshot);
-	if (ret) {
-		PWC_DEBUG_FLOW("pwc_set_video_mode attempt 1 failed.\n");
-		/* That failed... restore old mode (we know that worked) */
-		start = pwc_set_video_mode(pdev, pdev->view.x, pdev->view.y, pdev->vframes, pdev->vcompression, pdev->vsnapshot);
-		if (start) {
-			PWC_DEBUG_FLOW("pwc_set_video_mode attempt 2 failed.\n");
-		}
-	}
-	if (start == 0)
-	{
-		if (pwc_isoc_init(pdev) < 0)
-		{
-			PWC_WARNING("Failed to restart ISOC transfers in pwc_try_video_mode.\n");
-			ret = -EAGAIN; /* let's try again, who knows if it works a second time */
-		}
-	}
-	pdev->drop_frames++; /* try to avoid garbage during switch */
-	return ret; /* Return original error code */
-}
-
 /*********
  * sysfs
  *********/
@@ -1177,7 +1148,7 @@ static int pwc_video_open(struct file *file)
 	/* Set some defaults */
 	pdev->vsnapshot = 0;
 
-	/* Start iso pipe for video; first try the last used video size
+	/* Set video size, first try the last used video size
 	   (or the default one); if that fails try QCIF/10 or QSIF/10;
 	   it that fails too, give up.
 	 */
@@ -1204,15 +1175,6 @@ static int pwc_video_open(struct file *file)
 		return i;
 	}
 
-	i = pwc_isoc_init(pdev);
-	if (i) {
-		PWC_DEBUG_OPEN("Failed to init ISOC stuff = %d.\n", i);
-		pwc_isoc_cleanup(pdev);
-		pwc_free_buffers(pdev);
-		mutex_unlock(&pdev->modlock);
-		return i;
-	}
-
 	/* Initialize the webcam to sane value */
 	pwc_set_brightness(pdev, 0x7fff);
 	pwc_set_agc(pdev, 1, 0);
@@ -1327,6 +1289,11 @@ static ssize_t pwc_video_read(struct file *file, char __user *buf,
 		goto err_out;
 	}
 
+	/* Start the stream (if not already started) */
+	rv = pwc_isoc_init(pdev);
+	if (rv)
+		goto err_out;
+
 	/* In case we're doing partial reads, we don't have to wait for a frame */
 	if (pdev->image_read_pos == 0) {
 		/* Do wait queueing according to the (doc)book */
@@ -1396,6 +1363,7 @@ static unsigned int pwc_video_poll(struct file *file, poll_table *wait)
 {
 	struct video_device *vdev = file->private_data;
 	struct pwc_device *pdev;
+	int ret;
 
 	if (vdev == NULL)
 		return -EFAULT;
@@ -1403,6 +1371,13 @@ static unsigned int pwc_video_poll(struct file *file, poll_table *wait)
 	if (pdev == NULL)
 		return -EFAULT;
 
+	/* Start the stream (if not already started) */
+	mutex_lock(&pdev->modlock);
+	ret = pwc_isoc_init(pdev);
+	mutex_unlock(&pdev->modlock);
+	if (ret)
+		return ret;
+
 	poll_wait(file, &pdev->frameq, wait);
 	if (pdev->error_status)
 		return POLLERR;
diff --git a/drivers/media/video/pwc/pwc-v4l.c b/drivers/media/video/pwc/pwc-v4l.c
index 7061a03f5cf..8ca4d22b438 100644
--- a/drivers/media/video/pwc/pwc-v4l.c
+++ b/drivers/media/video/pwc/pwc-v4l.c
@@ -309,7 +309,10 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f)
 	    pixelformat != V4L2_PIX_FMT_PWC2)
 		return -EINVAL;
 
-	PWC_DEBUG_IOCTL("Try to change format to: width=%d height=%d fps=%d "
+	if (pdev->iso_init)
+		return -EBUSY;
+
+	PWC_DEBUG_IOCTL("Trying to set format to: width=%d height=%d fps=%d "
 			"compression=%d snapshot=%d format=%c%c%c%c\n",
 			f->fmt.pix.width, f->fmt.pix.height, fps,
 			compression, snapshot,
@@ -318,14 +321,14 @@ static int pwc_vidioc_set_fmt(struct pwc_device *pdev, struct v4l2_format *f)
 			(pixelformat>>16)&255,
 			(pixelformat>>24)&255);
 
-	ret = pwc_try_video_mode(pdev,
+	ret = pwc_set_video_mode(pdev,
 				 f->fmt.pix.width,
 				 f->fmt.pix.height,
 				 fps,
 				 compression,
 				 snapshot);
 
-	PWC_DEBUG_IOCTL("pwc_try_video_mode(), return=%d\n", ret);
+	PWC_DEBUG_IOCTL("pwc_set_video_mode(), return=%d\n", ret);
 
 	if (ret)
 		return ret;
@@ -359,23 +362,6 @@ long pwc_video_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 
 	switch (cmd) {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-		/* mmap() functions */
-		case VIDIOCGMBUF:
-		{
-			/* Tell the user program how much memory is needed for a mmap() */
-			struct video_mbuf *vm = arg;
-			int i;
-
-			memset(vm, 0, sizeof(*vm));
-			vm->size = pwc_mbufs * pdev->len_per_image;
-			vm->frames = pwc_mbufs; /* double buffering should be enough for most applications */
-			for (i = 0; i < pwc_mbufs; i++)
-				vm->offsets[i] = i * pdev->len_per_image;
-			break;
-		}
-#endif
-
 		/* V4L2 Layer */
 		case VIDIOC_QUERYCAP:
 		{
@@ -882,9 +868,7 @@ long pwc_video_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 
 		case VIDIOC_STREAMON:
 		{
-			/* WARNING: pwc_try_video_mode() called pwc_isoc_init */
-			pwc_isoc_init(pdev);
-			return 0;
+			return pwc_isoc_init(pdev);
 		}
 
 		case VIDIOC_STREAMOFF:
diff --git a/drivers/media/video/pwc/pwc.h b/drivers/media/video/pwc/pwc.h
index 36a9c83b5f5..16bbc6df9b0 100644
--- a/drivers/media/video/pwc/pwc.h
+++ b/drivers/media/video/pwc/pwc.h
@@ -275,7 +275,6 @@ extern int pwc_trace;
 extern int pwc_mbufs;
 
 /** functions in pwc-if.c */
-int pwc_try_video_mode(struct pwc_device *pdev, int width, int height, int new_fps, int new_compression, int new_snapshot);
 int pwc_handle_frame(struct pwc_device *pdev);
 void pwc_next_image(struct pwc_device *pdev);
 int pwc_isoc_init(struct pwc_device *pdev);
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index c143ed0a527..02686771740 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -852,7 +852,7 @@ static void pxa_camera_init_videobuf(struct videobuf_queue *q,
 	 */
 	videobuf_queue_sg_init(q, &pxa_videobuf_ops, NULL, &pcdev->lock,
 				V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-				sizeof(struct pxa_buffer), icd, NULL);
+				sizeof(struct pxa_buffer), icd, &icd->video_lock);
 }
 
 static u32 mclk_get_divisor(struct platform_device *pdev,
diff --git a/drivers/media/video/rj54n1cb0c.c b/drivers/media/video/rj54n1cb0c.c
index d2fa2d43ff1..57e11b6f19f 100644
--- a/drivers/media/video/rj54n1cb0c.c
+++ b/drivers/media/video/rj54n1cb0c.c
@@ -1460,7 +1460,6 @@ static int rj54n1_remove(struct i2c_client *client)
 	icd->ops = NULL;
 	if (icl->free_bus)
 		icl->free_bus(icl);
-	client->driver = NULL;
 	kfree(rj54n1);
 
 	return 0;
diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c
index f5a46c45871..b63f8cafa67 100644
--- a/drivers/media/video/s2255drv.c
+++ b/drivers/media/video/s2255drv.c
@@ -49,7 +49,6 @@
 #include <linux/videodev2.h>
 #include <linux/version.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <media/videobuf-vmalloc.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-device.h>
@@ -269,7 +268,7 @@ struct s2255_dev {
 	struct v4l2_device 	v4l2_dev;
 	atomic_t                num_channels;
 	int			frames;
-	struct mutex		lock;
+	struct mutex		lock;	/* channels[].vdev.lock */
 	struct mutex		open_lock;
 	struct usb_device	*udev;
 	struct usb_interface	*interface;
@@ -781,20 +780,14 @@ static struct videobuf_queue_ops s2255_video_qops = {
 
 static int res_get(struct s2255_fh *fh)
 {
-	struct s2255_dev *dev = fh->dev;
-	/* is it free? */
 	struct s2255_channel *channel = fh->channel;
-	mutex_lock(&dev->lock);
-	if (channel->resources) {
-		/* no, someone else uses it */
-		mutex_unlock(&dev->lock);
-		return 0;
-	}
+	/* is it free? */
+	if (channel->resources)
+		return 0; /* no, someone else uses it */
 	/* it's free, grab it */
 	channel->resources = 1;
 	fh->resources = 1;
 	dprintk(1, "s2255: res: get\n");
-	mutex_unlock(&dev->lock);
 	return 1;
 }
 
@@ -812,11 +805,8 @@ static int res_check(struct s2255_fh *fh)
 static void res_free(struct s2255_fh *fh)
 {
 	struct s2255_channel *channel = fh->channel;
-	struct s2255_dev *dev = fh->dev;
-	mutex_lock(&dev->lock);
 	channel->resources = 0;
 	fh->resources = 0;
-	mutex_unlock(&dev->lock);
 	dprintk(1, "res: put\n");
 }
 
@@ -1107,15 +1097,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
 	return rc;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidioc_cgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct s2255_fh *fh = priv;
-
-	return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
-}
-#endif
-
 /* write to the configuration pipe, synchronously */
 static int s2255_write_config(struct usb_device *udev, unsigned char *pbuf,
 			      int size)
@@ -1219,7 +1200,6 @@ static int s2255_set_mode(struct s2255_channel *channel,
 	__le32 *buffer;
 	unsigned long chn_rev;
 	struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev);
-	mutex_lock(&dev->lock);
 	chn_rev = G_chnmap[channel->idx];
 	dprintk(3, "%s channel: %d\n", __func__, channel->idx);
 	/* if JPEG, set the quality */
@@ -1236,7 +1216,6 @@ static int s2255_set_mode(struct s2255_channel *channel,
 	buffer = kzalloc(512, GFP_KERNEL);
 	if (buffer == NULL) {
 		dev_err(&dev->udev->dev, "out of mem\n");
-		mutex_unlock(&dev->lock);
 		return -ENOMEM;
 	}
 	/* set the mode */
@@ -1261,7 +1240,6 @@ static int s2255_set_mode(struct s2255_channel *channel,
 	}
 	/* clear the restart flag */
 	channel->mode.restart = 0;
-	mutex_unlock(&dev->lock);
 	dprintk(1, "%s chn %d, result: %d\n", __func__, channel->idx, res);
 	return res;
 }
@@ -1272,13 +1250,11 @@ static int s2255_cmd_status(struct s2255_channel *channel, u32 *pstatus)
 	__le32 *buffer;
 	u32 chn_rev;
 	struct s2255_dev *dev = to_s2255_dev(channel->vdev.v4l2_dev);
-	mutex_lock(&dev->lock);
 	chn_rev = G_chnmap[channel->idx];
 	dprintk(4, "%s chan %d\n", __func__, channel->idx);
 	buffer = kzalloc(512, GFP_KERNEL);
 	if (buffer == NULL) {
 		dev_err(&dev->udev->dev, "out of mem\n");
-		mutex_unlock(&dev->lock);
 		return -ENOMEM;
 	}
 	/* form the get vid status command */
@@ -1298,7 +1274,6 @@ static int s2255_cmd_status(struct s2255_channel *channel, u32 *pstatus)
 	}
 	*pstatus = channel->vidstatus;
 	dprintk(4, "%s, vid status %d\n", __func__, *pstatus);
-	mutex_unlock(&dev->lock);
 	return res;
 }
 
@@ -1817,7 +1792,8 @@ static int s2255_open(struct file *file)
 				    NULL, &dev->slock,
 				    fh->type,
 				    V4L2_FIELD_INTERLACED,
-				    sizeof(struct s2255_buffer), fh, NULL);
+				    sizeof(struct s2255_buffer),
+				    fh, vdev->lock);
 	return 0;
 }
 
@@ -1900,7 +1876,7 @@ static const struct v4l2_file_operations s2255_fops_v4l = {
 	.open = s2255_open,
 	.release = s2255_release,
 	.poll = s2255_poll,
-	.ioctl = video_ioctl2,	/* V4L2 ioctl handler */
+	.unlocked_ioctl = video_ioctl2,	/* V4L2 ioctl handler */
 	.mmap = s2255_mmap_v4l,
 };
 
@@ -1924,9 +1900,6 @@ static const struct v4l2_ioctl_ops s2255_ioctl_ops = {
 	.vidioc_s_ctrl = vidioc_s_ctrl,
 	.vidioc_streamon = vidioc_streamon,
 	.vidioc_streamoff = vidioc_streamoff,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = vidioc_cgmbuf,
-#endif
 	.vidioc_s_jpegcomp = vidioc_s_jpegcomp,
 	.vidioc_g_jpegcomp = vidioc_g_jpegcomp,
 	.vidioc_s_parm = vidioc_s_parm,
@@ -1970,6 +1943,7 @@ static int s2255_probe_v4l(struct s2255_dev *dev)
 		channel->vidq.dev = dev;
 		/* register 4 video devices */
 		channel->vdev = template;
+		channel->vdev.lock = &dev->lock;
 		channel->vdev.v4l2_dev = &dev->v4l2_dev;
 		video_set_drvdata(&channel->vdev, channel);
 		if (video_nr == -1)
@@ -2676,7 +2650,9 @@ static void s2255_disconnect(struct usb_interface *interface)
 	struct s2255_dev *dev = to_s2255_dev(usb_get_intfdata(interface));
 	int i;
 	int channels = atomic_read(&dev->num_channels);
+	mutex_lock(&dev->lock);
 	v4l2_device_disconnect(&dev->v4l2_dev);
+	mutex_unlock(&dev->lock);
 	/*see comments in the uvc_driver.c usb disconnect function */
 	atomic_inc(&dev->num_channels);
 	/* unregister each video device. */
diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c
index e8f13d3e2df..2f500809f53 100644
--- a/drivers/media/video/s5p-fimc/fimc-capture.c
+++ b/drivers/media/video/s5p-fimc/fimc-capture.c
@@ -44,7 +44,7 @@ static struct v4l2_subdev *fimc_subdev_register(struct fimc_dev *fimc,
 		return ERR_PTR(-ENOMEM);
 
 	sd = v4l2_i2c_new_subdev_board(&vid_cap->v4l2_dev, i2c_adap,
-				       MODULE_NAME, isp_info->board_info, NULL);
+				       isp_info->board_info, NULL);
 	if (!sd) {
 		v4l2_err(&vid_cap->v4l2_dev, "failed to acquire subdev\n");
 		return NULL;
@@ -522,6 +522,7 @@ static int fimc_cap_streamon(struct file *file, void *priv,
 	INIT_LIST_HEAD(&fimc->vid_cap.active_buf_q);
 	fimc->vid_cap.active_buf_cnt = 0;
 	fimc->vid_cap.frame_count = 0;
+	fimc->vid_cap.buf_index = fimc_hw_get_frame_index(fimc);
 
 	set_bit(ST_CAPT_PEND, &fimc->state);
 	ret = videobuf_streamon(&fimc->vid_cap.vbq);
@@ -652,6 +653,50 @@ static int fimc_cap_s_ctrl(struct file *file, void *priv,
 	return ret;
 }
 
+static int fimc_cap_cropcap(struct file *file, void *fh,
+			    struct v4l2_cropcap *cr)
+{
+	struct fimc_frame *f;
+	struct fimc_ctx *ctx = fh;
+	struct fimc_dev *fimc = ctx->fimc_dev;
+
+	if (cr->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&fimc->lock))
+		return -ERESTARTSYS;
+
+	f = &ctx->s_frame;
+	cr->bounds.left		= 0;
+	cr->bounds.top		= 0;
+	cr->bounds.width	= f->o_width;
+	cr->bounds.height	= f->o_height;
+	cr->defrect		= cr->bounds;
+
+	mutex_unlock(&fimc->lock);
+	return 0;
+}
+
+static int fimc_cap_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
+{
+	struct fimc_frame *f;
+	struct fimc_ctx *ctx = file->private_data;
+	struct fimc_dev *fimc = ctx->fimc_dev;
+
+
+	if (mutex_lock_interruptible(&fimc->lock))
+		return -ERESTARTSYS;
+
+	f = &ctx->s_frame;
+	cr->c.left	= f->offs_h;
+	cr->c.top	= f->offs_v;
+	cr->c.width	= f->width;
+	cr->c.height	= f->height;
+
+	mutex_unlock(&fimc->lock);
+	return 0;
+}
+
 static int fimc_cap_s_crop(struct file *file, void *fh,
 			       struct v4l2_crop *cr)
 {
@@ -716,9 +761,9 @@ static const struct v4l2_ioctl_ops fimc_capture_ioctl_ops = {
 	.vidioc_g_ctrl			= fimc_vidioc_g_ctrl,
 	.vidioc_s_ctrl			= fimc_cap_s_ctrl,
 
-	.vidioc_g_crop			= fimc_vidioc_g_crop,
+	.vidioc_g_crop			= fimc_cap_g_crop,
 	.vidioc_s_crop			= fimc_cap_s_crop,
-	.vidioc_cropcap			= fimc_vidioc_cropcap,
+	.vidioc_cropcap			= fimc_cap_cropcap,
 
 	.vidioc_enum_input		= fimc_cap_enum_input,
 	.vidioc_s_input			= fimc_cap_s_input,
@@ -785,7 +830,7 @@ int fimc_register_capture_device(struct fimc_dev *fimc)
 	videobuf_queue_dma_contig_init(&vid_cap->vbq, &fimc_qops,
 		vid_cap->v4l2_dev.dev, &fimc->irqlock,
 		V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
-		sizeof(struct fimc_vid_buffer), (void *)ctx);
+		sizeof(struct fimc_vid_buffer), (void *)ctx, NULL);
 
 	ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1);
 	if (ret) {
diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c
index 2e7c547894b..817aa66627f 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.c
+++ b/drivers/media/video/s5p-fimc/fimc-core.c
@@ -50,8 +50,8 @@ static struct fimc_fmt fimc_formats[] = {
 		.planes_cnt = 1,
 		.flags = FMT_FLAGS_M2M,
 	}, {
-		.name = "XRGB-8-8-8-8, 24 bpp",
-		.fourcc	= V4L2_PIX_FMT_RGB24,
+		.name = "XRGB-8-8-8-8, 32 bpp",
+		.fourcc	= V4L2_PIX_FMT_RGB32,
 		.depth = 32,
 		.color	= S5P_FIMC_RGB888,
 		.buff_cnt = 1,
@@ -543,7 +543,7 @@ static void fimc_dma_run(void *priv)
 	unsigned long flags;
 	u32 ret;
 
-	if (WARN(!ctx, "null hardware context"))
+	if (WARN(!ctx, "null hardware context\n"))
 		return;
 
 	fimc = ctx->fimc_dev;
@@ -983,6 +983,7 @@ int fimc_vidioc_queryctrl(struct file *file, void *priv,
 {
 	struct fimc_ctx *ctx = priv;
 	struct v4l2_queryctrl *c;
+	int ret = -EINVAL;
 
 	c = get_ctrl(qc->id);
 	if (c) {
@@ -990,10 +991,14 @@ int fimc_vidioc_queryctrl(struct file *file, void *priv,
 		return 0;
 	}
 
-	if (ctx->state & FIMC_CTX_CAP)
-		return v4l2_subdev_call(ctx->fimc_dev->vid_cap.sd,
+	if (ctx->state & FIMC_CTX_CAP) {
+		if (mutex_lock_interruptible(&ctx->fimc_dev->lock))
+			return -ERESTARTSYS;
+		ret = v4l2_subdev_call(ctx->fimc_dev->vid_cap.sd,
 					core, queryctrl, qc);
-	return -EINVAL;
+		mutex_unlock(&ctx->fimc_dev->lock);
+	}
+	return ret;
 }
 
 int fimc_vidioc_g_ctrl(struct file *file, void *priv,
@@ -1115,7 +1120,7 @@ static int fimc_m2m_s_ctrl(struct file *file, void *priv,
 	return 0;
 }
 
-int fimc_vidioc_cropcap(struct file *file, void *fh,
+static int fimc_m2m_cropcap(struct file *file, void *fh,
 			struct v4l2_cropcap *cr)
 {
 	struct fimc_frame *frame;
@@ -1139,7 +1144,7 @@ int fimc_vidioc_cropcap(struct file *file, void *fh,
 	return 0;
 }
 
-int fimc_vidioc_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
+static int fimc_m2m_g_crop(struct file *file, void *fh, struct v4l2_crop *cr)
 {
 	struct fimc_frame *frame;
 	struct fimc_ctx *ctx = file->private_data;
@@ -1167,22 +1172,22 @@ int fimc_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr)
 	struct fimc_frame *f;
 	u32 min_size, halign;
 
-	f = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) ?
-		&ctx->s_frame : &ctx->d_frame;
-
 	if (cr->c.top < 0 || cr->c.left < 0) {
 		v4l2_err(&fimc->m2m.v4l2_dev,
 			"doesn't support negative values for top & left\n");
 		return -EINVAL;
 	}
 
-	f = ctx_get_frame(ctx, cr->type);
-	if (IS_ERR(f))
-		return PTR_ERR(f);
+	if (cr->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		f = (ctx->state & FIMC_CTX_CAP) ? &ctx->s_frame : &ctx->d_frame;
+	else if (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT &&
+		 ctx->state & FIMC_CTX_M2M)
+		f = &ctx->s_frame;
+	else
+		return -EINVAL;
 
-	min_size = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT)
-		? fimc->variant->min_inp_pixsize
-		: fimc->variant->min_out_pixsize;
+	min_size = (f == &ctx->s_frame) ?
+		fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize;
 
 	if (ctx->state & FIMC_CTX_M2M) {
 		if (fimc->id == 1 && fimc->variant->pix_hoff)
@@ -1233,6 +1238,9 @@ static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
 	f = (cr->type == V4L2_BUF_TYPE_VIDEO_OUTPUT) ?
 		&ctx->s_frame : &ctx->d_frame;
 
+	if (mutex_lock_interruptible(&fimc->lock))
+		return -ERESTARTSYS;
+
 	spin_lock_irqsave(&ctx->slock, flags);
 	if (~ctx->state & (FIMC_SRC_FMT | FIMC_DST_FMT)) {
 		/* Check to see if scaling ratio is within supported range */
@@ -1241,9 +1249,9 @@ static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
 		else
 			ret = fimc_check_scaler_ratio(&cr->c, &ctx->s_frame);
 		if (ret) {
-			spin_unlock_irqrestore(&ctx->slock, flags);
 			v4l2_err(&fimc->m2m.v4l2_dev, "Out of scaler range");
-			return -EINVAL;
+			ret = -EINVAL;
+			goto scr_unlock;
 		}
 	}
 	ctx->state |= FIMC_PARAMS;
@@ -1253,7 +1261,9 @@ static int fimc_m2m_s_crop(struct file *file, void *fh, struct v4l2_crop *cr)
 	f->width  = cr->c.width;
 	f->height = cr->c.height;
 
+scr_unlock:
 	spin_unlock_irqrestore(&ctx->slock, flags);
+	mutex_unlock(&fimc->lock);
 	return 0;
 }
 
@@ -1285,9 +1295,9 @@ static const struct v4l2_ioctl_ops fimc_m2m_ioctl_ops = {
 	.vidioc_g_ctrl			= fimc_vidioc_g_ctrl,
 	.vidioc_s_ctrl			= fimc_m2m_s_ctrl,
 
-	.vidioc_g_crop			= fimc_vidioc_g_crop,
+	.vidioc_g_crop			= fimc_m2m_g_crop,
 	.vidioc_s_crop			= fimc_m2m_s_crop,
-	.vidioc_cropcap			= fimc_vidioc_cropcap
+	.vidioc_cropcap			= fimc_m2m_cropcap
 
 };
 
@@ -1396,7 +1406,7 @@ static const struct v4l2_file_operations fimc_m2m_fops = {
 	.open		= fimc_m2m_open,
 	.release	= fimc_m2m_release,
 	.poll		= fimc_m2m_poll,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.mmap		= fimc_m2m_mmap,
 };
 
@@ -1736,6 +1746,7 @@ static struct samsung_fimc_variant fimc0_variant_s5pv310 = {
 	.pix_hoff	 = 1,
 	.has_inp_rot	 = 1,
 	.has_out_rot	 = 1,
+	.has_cistatus2	 = 1,
 	.min_inp_pixsize = 16,
 	.min_out_pixsize = 16,
 	.hor_offs_align	 = 1,
@@ -1745,6 +1756,7 @@ static struct samsung_fimc_variant fimc0_variant_s5pv310 = {
 
 static struct samsung_fimc_variant fimc2_variant_s5pv310 = {
 	.pix_hoff	 = 1,
+	.has_cistatus2	 = 1,
 	.min_inp_pixsize = 16,
 	.min_out_pixsize = 16,
 	.hor_offs_align	 = 1,
diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h
index 3e107851656..4f047d35f8a 100644
--- a/drivers/media/video/s5p-fimc/fimc-core.h
+++ b/drivers/media/video/s5p-fimc/fimc-core.h
@@ -13,13 +13,15 @@
 
 /*#define DEBUG*/
 
+#include <linux/sched.h>
 #include <linux/types.h>
+#include <linux/videodev2.h>
 #include <media/videobuf-core.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-mem2mem.h>
 #include <media/v4l2-mediabus.h>
 #include <media/s3c_fimc.h>
-#include <linux/videodev2.h>
+
 #include "regs-fimc.h"
 
 #define err(fmt, args...) \
@@ -369,6 +371,7 @@ struct fimc_pix_limit {
  * @pix_hoff: indicate whether horizontal offset is in pixels or in bytes
  * @has_inp_rot: set if has input rotator
  * @has_out_rot: set if has output rotator
+ * @has_cistatus2: 1 if CISTATUS2 register is present in this IP revision
  * @pix_limit: pixel size constraints for the scaler
  * @min_inp_pixsize: minimum input pixel size
  * @min_out_pixsize: minimum output pixel size
@@ -379,6 +382,7 @@ struct samsung_fimc_variant {
 	unsigned int	pix_hoff:1;
 	unsigned int	has_inp_rot:1;
 	unsigned int	has_out_rot:1;
+	unsigned int	has_cistatus2:1;
 	struct fimc_pix_limit *pix_limit;
 	u16		min_inp_pixsize;
 	u16		min_out_pixsize;
@@ -554,11 +558,19 @@ static inline struct fimc_frame *ctx_get_frame(struct fimc_ctx *ctx,
 	return frame;
 }
 
+/* Return an index to the buffer actually being written. */
 static inline u32 fimc_hw_get_frame_index(struct fimc_dev *dev)
 {
-	u32 reg = readl(dev->regs + S5P_CISTATUS);
-	return (reg & S5P_CISTATUS_FRAMECNT_MASK) >>
-		S5P_CISTATUS_FRAMECNT_SHIFT;
+	u32 reg;
+
+	if (dev->variant->has_cistatus2) {
+		reg = readl(dev->regs + S5P_CISTATUS2) & 0x3F;
+		return reg > 0 ? --reg : reg;
+	} else {
+		reg = readl(dev->regs + S5P_CISTATUS);
+		return (reg & S5P_CISTATUS_FRAMECNT_MASK) >>
+			S5P_CISTATUS_FRAMECNT_SHIFT;
+	}
 }
 
 /* -----------------------------------------------------*/
@@ -594,10 +606,6 @@ int fimc_vidioc_g_fmt(struct file *file, void *priv,
 		      struct v4l2_format *f);
 int fimc_vidioc_try_fmt(struct file *file, void *priv,
 			struct v4l2_format *f);
-int fimc_vidioc_g_crop(struct file *file, void *fh,
-		       struct v4l2_crop *cr);
-int fimc_vidioc_cropcap(struct file *file, void *fh,
-			struct v4l2_cropcap *cr);
 int fimc_vidioc_queryctrl(struct file *file, void *priv,
 			  struct v4l2_queryctrl *qc);
 int fimc_vidioc_g_ctrl(struct file *file, void *priv,
diff --git a/drivers/media/video/s5p-fimc/regs-fimc.h b/drivers/media/video/s5p-fimc/regs-fimc.h
index a57daedb5b5..57e33f84fcf 100644
--- a/drivers/media/video/s5p-fimc/regs-fimc.h
+++ b/drivers/media/video/s5p-fimc/regs-fimc.h
@@ -165,6 +165,9 @@
 #define S5P_CISTATUS_VVALID_A		(1 << 15)
 #define S5P_CISTATUS_VVALID_B		(1 << 14)
 
+/* Indexes to the last and the currently processed buffer. */
+#define S5P_CISTATUS2			0x68
+
 /* Image capture control */
 #define S5P_CIIMGCPT			0xc0
 #define S5P_CIIMGCPT_IMGCPTEN		(1 << 31)
diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c
index 984c0feb2a4..99a2ac16f9e 100644
--- a/drivers/media/video/saa6588.c
+++ b/drivers/media/video/saa6588.c
@@ -31,7 +31,7 @@
 #include <linux/wait.h>
 #include <asm/uaccess.h>
 
-#include <media/rds.h>
+#include <media/saa6588.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
 
@@ -181,7 +181,7 @@ static int block_to_user_buf(struct saa6588 *s, unsigned char __user *user_buf)
 	return 1;
 }
 
-static void read_from_buf(struct saa6588 *s, struct rds_command *a)
+static void read_from_buf(struct saa6588 *s, struct saa6588_command *a)
 {
 	unsigned long flags;
 
@@ -392,25 +392,25 @@ static void saa6588_configure(struct saa6588 *s)
 static long saa6588_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
 {
 	struct saa6588 *s = to_saa6588(sd);
-	struct rds_command *a = arg;
+	struct saa6588_command *a = arg;
 
 	switch (cmd) {
 		/* --- open() for /dev/radio --- */
-	case RDS_CMD_OPEN:
+	case SAA6588_CMD_OPEN:
 		a->result = 0;	/* return error if chip doesn't work ??? */
 		break;
 		/* --- close() for /dev/radio --- */
-	case RDS_CMD_CLOSE:
+	case SAA6588_CMD_CLOSE:
 		s->data_available_for_read = 1;
 		wake_up_interruptible(&s->read_queue);
 		a->result = 0;
 		break;
 		/* --- read() for /dev/radio --- */
-	case RDS_CMD_READ:
+	case SAA6588_CMD_READ:
 		read_from_buf(s, a);
 		break;
 		/* --- poll() for /dev/radio --- */
-	case RDS_CMD_POLL:
+	case SAA6588_CMD_POLL:
 		a->result = 0;
 		if (s->data_available_for_read) {
 			a->result |= POLLIN | POLLRDNORM;
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index 301c62b88ca..f35459d1f42 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1348,8 +1348,17 @@ static int saa711x_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
 	int reg1e;
 
 	*std = V4L2_STD_ALL;
-	if (state->ident != V4L2_IDENT_SAA7115)
+	if (state->ident != V4L2_IDENT_SAA7115) {
+		int reg1f = saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC);
+
+		if (reg1f & 0x20)
+			*std = V4L2_STD_525_60;
+		else
+			*std = V4L2_STD_625_50;
+
 		return 0;
+	}
+
 	reg1e = saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC);
 
 	switch (reg1e & 0x03) {
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 3fe71be41a1..380f1b28cfc 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -26,7 +26,7 @@ config VIDEO_SAA7134_ALSA
 
 config VIDEO_SAA7134_RC
 	bool "Philips SAA7134 Remote Controller support"
-	depends on VIDEO_IR
+	depends on RC_CORE
 	depends on VIDEO_SAA7134
 	default y
 	---help---
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 10a6cbf6a79..e7aa588c6c5 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -5176,6 +5176,58 @@ struct saa7134_board saa7134_boards[] = {
 			.amux = 2,
 		},
 	},
+	[SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG] = {
+		.name           = "Kworld PCI SBTVD/ISDB-T Full-Seg Hybrid",
+		.audio_clock    = 0x00187de7,
+#if 0
+	/*
+	 * FIXME: Analog mode doesn't work, if digital is enabled. The proper
+	 * fix is to use tda8290 driver, but Kworld seems to use an
+	 * unsupported version of tda8295.
+	 */
+		.tuner_type     = TUNER_NXP_TDA18271,	/* TUNER_PHILIPS_TDA8290 */
+		.tuner_addr     = 0x60,
+#else
+		.tuner_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+#endif
+		.radio_type     = UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.gpiomask       = 0x8e054000,
+		.mpeg           = SAA7134_MPEG_DVB,
+		.ts_type	= SAA7134_MPEG_TS_PARALLEL,
+		.inputs = { {
+			.name   = name_tv,
+			.vmux   = 1,
+			.amux   = TV,
+			.tv     = 1,
+#if 0	/* FIXME */
+		}, {
+			.name   = name_comp1,
+			.vmux   = 3,
+			.amux   = LINE1,
+			.gpio   = 0x200,
+		}, {
+			.name   = name_svideo,
+			.vmux   = 8,
+			.amux   = LINE1,
+			.gpio   = 0x200,
+#endif
+		} },
+#if 0
+		.radio = {
+			.name   = name_radio,
+			.vmux   = 1,
+			.amux   = LINE1,
+			.gpio   = 0x100,
+		},
+#endif
+		.mute = {
+			.name = name_mute,
+			.vmux = 0,
+			.amux = TV,
+		},
+	},
 	[SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS] = {
 		.name           = "Avermedia AVerTV GO 007 FM Plus",
 		.audio_clock    = 0x00187de7,
@@ -5486,6 +5538,37 @@ struct saa7134_board saa7134_boards[] = {
 			.amux   = LINE2,
 		} },
 	},
+	[SAA7134_BOARD_VIDEOMATE_M1F] = {
+		/* Pavel Osnova <pvosnova@gmail.com> */
+		.name           = "Compro VideoMate Vista M1F",
+		.audio_clock    = 0x00187de7,
+		.tuner_type     = TUNER_LG_PAL_NEW_TAPC,
+		.radio_type     = TUNER_TEA5767,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = 0x60,
+		.inputs         = { {
+			.name = name_tv,
+			.vmux = 1,
+			.amux = TV,
+			.tv   = 1,
+		}, {
+			.name = name_comp1,
+			.vmux = 3,
+			.amux = LINE2,
+		}, {
+			.name = name_svideo,
+			.vmux = 8,
+			.amux = LINE2,
+		} },
+		.radio = {
+			.name = name_radio,
+			.amux = LINE1,
+		},
+		.mute = {
+			.name = name_mute,
+			.amux = TV,
+		},
+	},
 
 };
 
@@ -6615,6 +6698,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
 	}, {
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x17de,
+		.subdevice    = 0xb136,
+		.driver_data  = SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
 		.subvendor    = 0x1461, /* Avermedia Technologies Inc */
 		.subdevice    = 0xf31d,
 		.driver_data  = SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS,
@@ -6661,6 +6750,24 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subdevice    = 0x2804,
 		.driver_data  = SAA7134_BOARD_TECHNOTREND_BUDGET_T3000,
 	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x5ace, /* Beholder Intl. Ltd. */
+		.subdevice    = 0x7190,
+		.driver_data  = SAA7134_BOARD_BEHOLD_H7,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x5ace, /* Beholder Intl. Ltd. */
+		.subdevice    = 0x7090,
+		.driver_data  = SAA7134_BOARD_BEHOLD_A7,
+	}, {
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7135,
+		.subvendor    = 0x185b,
+		.subdevice    = 0xc900,
+		.driver_data  = SAA7134_BOARD_VIDEOMATE_M1F,
+	}, {
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
 		.device       = PCI_DEVICE_ID_PHILIPS_SAA7134,
@@ -6698,18 +6805,6 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subvendor    = PCI_ANY_ID,
 		.subdevice    = PCI_ANY_ID,
 		.driver_data  = SAA7134_BOARD_UNKNOWN,
-	}, {
-		.vendor       = PCI_VENDOR_ID_PHILIPS,
-		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
-		.subvendor    = 0x5ace, /* Beholder Intl. Ltd. */
-		.subdevice    = 0x7190,
-		.driver_data  = SAA7134_BOARD_BEHOLD_H7,
-	}, {
-		.vendor       = PCI_VENDOR_ID_PHILIPS,
-		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
-		.subvendor    = 0x5ace, /* Beholder Intl. Ltd. */
-		.subdevice    = 0x7090,
-		.driver_data  = SAA7134_BOARD_BEHOLD_A7,
 	},{
 		/* --- end of list --- */
 	}
@@ -6831,6 +6926,23 @@ static inline int saa7134_tda18271_hvr11x0_toggle_agc(struct saa7134_dev *dev,
 	return 0;
 }
 
+static inline int saa7134_kworld_sbtvd_toggle_agc(struct saa7134_dev *dev,
+						  enum tda18271_mode mode)
+{
+	/* toggle AGC switch through GPIO 27 */
+	switch (mode) {
+	case TDA18271_ANALOG:
+		saa7134_set_gpio(dev, 27, 0);
+		break;
+	case TDA18271_DIGITAL:
+		saa7134_set_gpio(dev, 27, 1);
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
 					  int command, int arg)
 {
@@ -6843,6 +6955,9 @@ static int saa7134_tda8290_18271_callback(struct saa7134_dev *dev,
 		case SAA7134_BOARD_HAUPPAUGE_HVR1120:
 			ret = saa7134_tda18271_hvr11x0_toggle_agc(dev, arg);
 			break;
+		case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
+			ret = saa7134_kworld_sbtvd_toggle_agc(dev, arg);
+			break;
 		default:
 			break;
 		}
@@ -6863,6 +6978,7 @@ static int saa7134_tda8290_callback(struct saa7134_dev *dev,
 	case SAA7134_BOARD_HAUPPAUGE_HVR1150:
 	case SAA7134_BOARD_HAUPPAUGE_HVR1120:
 	case SAA7134_BOARD_AVERMEDIA_M733A:
+	case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
 		/* tda8290 + tda18271 */
 		ret = saa7134_tda8290_18271_callback(dev, command, arg);
 		break;
@@ -6967,6 +7083,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_VIDEOMATE_TV_PVR:
 	case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS:
 	case SAA7134_BOARD_VIDEOMATE_TV_GOLD_PLUSII:
+	case SAA7134_BOARD_VIDEOMATE_M1F:
 	case SAA7134_BOARD_VIDEOMATE_DVBT_300:
 	case SAA7134_BOARD_VIDEOMATE_DVBT_200:
 	case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
@@ -7541,6 +7658,37 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 				       dev->name);
 		break;
 	}
+	case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
+	{
+		struct i2c_msg msg = { .addr = 0x4b, .flags = 0 };
+		int i;
+		static u8 buffer[][2] = {
+			{0x30, 0x31},
+			{0xff, 0x00},
+			{0x41, 0x03},
+			{0x41, 0x1a},
+			{0xff, 0x02},
+			{0x34, 0x00},
+			{0x45, 0x97},
+			{0x45, 0xc1},
+		};
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x4000);
+		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x4000);
+
+		/*
+		 * FIXME: identify what device is at addr 0x4b and what means
+		 * this initialization
+		 */
+		for (i = 0; i < ARRAY_SIZE(buffer); i++) {
+			msg.buf = &buffer[i][0];
+			msg.len = ARRAY_SIZE(buffer[0]);
+			if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
+				printk(KERN_WARNING
+				       "%s: Unable to enable tuner(%i).\n",
+				       dev->name, i);
+		}
+		break;
+	}
 	} /* switch() */
 
 	/* initialize tuner */
@@ -7551,22 +7699,22 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 		   so we do not need to probe for a radio tuner device. */
 		if (dev->radio_type != UNSET)
 			v4l2_i2c_new_subdev(&dev->v4l2_dev,
-				&dev->i2c_adap, NULL, "tuner",
+				&dev->i2c_adap, "tuner",
 				dev->radio_addr, NULL);
 		if (has_demod)
 			v4l2_i2c_new_subdev(&dev->v4l2_dev,
-				&dev->i2c_adap, NULL, "tuner",
+				&dev->i2c_adap, "tuner",
 				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		if (dev->tuner_addr == ADDR_UNSET) {
 			enum v4l2_i2c_tuner_type type =
 				has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
 
 			v4l2_i2c_new_subdev(&dev->v4l2_dev,
-				&dev->i2c_adap, NULL, "tuner",
+				&dev->i2c_adap, "tuner",
 				0, v4l2_i2c_tuner_addrs(type));
 		} else {
 			v4l2_i2c_new_subdev(&dev->v4l2_dev,
-				&dev->i2c_adap, NULL, "tuner",
+				&dev->i2c_adap, "tuner",
 				dev->tuner_addr, NULL);
 		}
 	}
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 764d7d219fe..6abeecff6da 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -166,8 +166,14 @@ static void request_submodules(struct saa7134_dev *dev)
 	schedule_work(&dev->request_module_wk);
 }
 
+static void flush_request_submodules(struct saa7134_dev *dev)
+{
+	flush_work_sync(&dev->request_module_wk);
+}
+
 #else
 #define request_submodules(dev)
+#define flush_request_submodules(dev)
 #endif /* CONFIG_MODULES */
 
 /* ------------------------------------------------------------------ */
@@ -991,7 +997,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	if (card_is_empress(dev)) {
 		struct v4l2_subdev *sd =
 			v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-				NULL, "saa6752hs",
+				"saa6752hs",
 				saa7134_boards[dev->board].empress_addr, NULL);
 
 		if (sd)
@@ -1002,7 +1008,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 		struct v4l2_subdev *sd;
 
 		sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
-				&dev->i2c_adap, NULL, "saa6588",
+				&dev->i2c_adap, "saa6588",
 				0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr));
 		if (sd) {
 			printk(KERN_INFO "%s: found RDS decoder\n", dev->name);
@@ -1010,8 +1016,6 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 		}
 	}
 
-	request_submodules(dev);
-
 	v4l2_prio_init(&dev->prio);
 
 	mutex_lock(&saa7134_devlist_lock);
@@ -1066,6 +1070,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
 	if (saa7134_dmasound_init && !dev->dmasound.priv_data)
 		saa7134_dmasound_init(dev);
 
+	request_submodules(dev);
 	return 0;
 
  fail4:
@@ -1091,6 +1096,8 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev)
 	struct saa7134_dev *dev = container_of(v4l2_dev, struct saa7134_dev, v4l2_dev);
 	struct saa7134_mpeg_ops *mops;
 
+	flush_request_submodules(dev);
+
 	/* Release DMA sound modules if present */
 	if (saa7134_dmasound_exit && dev->dmasound.priv_data) {
 		saa7134_dmasound_exit(dev);
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index beb95e21d10..3315a48a848 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -52,6 +52,7 @@
 #include "tda18271.h"
 #include "lgdt3305.h"
 #include "tda8290.h"
+#include "mb86a20s.h"
 
 #include "zl10353.h"
 
@@ -228,6 +229,20 @@ static struct mt352_config avermedia_xc3028_mt352_dev = {
 	.demod_init      = mt352_avermedia_xc3028_init,
 };
 
+static struct tda18271_std_map mb86a20s_tda18271_std_map = {
+	.dvbt_6   = { .if_freq = 3300, .agc_mode = 3, .std = 4,
+		      .if_lvl = 7, .rfagc_top = 0x37, },
+};
+
+static struct tda18271_config kworld_tda18271_config = {
+	.std_map = &mb86a20s_tda18271_std_map,
+	.gate    = TDA18271_GATE_DIGITAL,
+};
+
+static const struct mb86a20s_config kworld_mb86a20s_config = {
+	.demod_address = 0x10,
+};
+
 /* ==================================================================
  * tda1004x based DVB-T cards, helper functions
  */
@@ -608,6 +623,37 @@ static struct tda827x_config tda827x_cfg_2_sw42 = {
 
 /* ------------------------------------------------------------------ */
 
+static int __kworld_sbtvd_i2c_gate_ctrl(struct saa7134_dev *dev, int enable)
+{
+	unsigned char initmsg[] = {0x45, 0x97};
+	unsigned char msg_enable[] = {0x45, 0xc1};
+	unsigned char msg_disable[] = {0x45, 0x81};
+	struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2};
+
+	if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
+		wprintk("could not access the I2C gate\n");
+		return -EIO;
+	}
+	if (enable)
+		msg.buf = msg_enable;
+	else
+		msg.buf = msg_disable;
+	if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
+		wprintk("could not access the I2C gate\n");
+		return -EIO;
+	}
+	msleep(20);
+	return 0;
+}
+static int kworld_sbtvd_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
+{
+	struct saa7134_dev *dev = fe->dvb->priv;
+
+	return __kworld_sbtvd_i2c_gate_ctrl(dev, enable);
+}
+
+/* ------------------------------------------------------------------ */
+
 static struct tda1004x_config tda827x_lifeview_config = {
 	.demod_address = 0x08,
 	.invert        = 1,
@@ -1613,6 +1659,29 @@ static int dvb_init(struct saa7134_dev *dev)
 				   &dtv1000s_tda18271_config);
 		}
 		break;
+	case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
+		__kworld_sbtvd_i2c_gate_ctrl(dev, 0);
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x14000);
+		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x14000);
+		msleep(20);
+		saa_writel(SAA7134_GPIO_GPMODE0 >> 2, 0x54000);
+		saa_writel(SAA7134_GPIO_GPSTATUS0 >> 2, 0x54000);
+		msleep(20);
+		fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
+					       &kworld_mb86a20s_config,
+					       &dev->i2c_adap);
+		__kworld_sbtvd_i2c_gate_ctrl(dev, 1);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(tda18271_attach, fe0->dvb.frontend,
+				   0x60, &dev->i2c_adap,
+				   &kworld_tda18271_config);
+			/*
+			 * Only after success, it can initialize the gate, otherwise
+			 * an OOPS will hit, due to kfree(fe0->dvb.frontend)
+			 */
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_i2c_gate_ctrl;
+		}
+		break;
 	default:
 		wprintk("Huh? unknown DVB card?\n");
 		break;
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 1467a30a434..6b8459c7728 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -21,7 +21,6 @@
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/smp_lock.h>
 #include <linux/delay.h>
 
 #include "saa7134-reg.h"
@@ -554,7 +553,7 @@ static int empress_fini(struct saa7134_dev *dev)
 
 	if (NULL == dev->empress_dev)
 		return 0;
-	flush_scheduled_work();
+	flush_work_sync(&dev->empress_workqueue);
 	video_unregister_device(dev->empress_dev);
 	dev->empress_dev = NULL;
 	return 0;
diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c
index 46d31dfca7a..dc646e65edb 100644
--- a/drivers/media/video/saa7134/saa7134-input.c
+++ b/drivers/media/video/saa7134/saa7134-input.c
@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/input.h>
 #include <linux/slab.h>
 
 #include "saa7134-reg.h"
@@ -42,41 +41,19 @@ static int pinnacle_remote;
 module_param(pinnacle_remote, int, 0644);    /* Choose Pinnacle PCTV remote */
 MODULE_PARM_DESC(pinnacle_remote, "Specify Pinnacle PCTV remote: 0=coloured, 1=grey (defaults to 0)");
 
-static int ir_rc5_remote_gap = 885;
-module_param(ir_rc5_remote_gap, int, 0644);
-static int ir_rc5_key_timeout = 115;
-module_param(ir_rc5_key_timeout, int, 0644);
-
-static int repeat_delay = 500;
-module_param(repeat_delay, int, 0644);
-MODULE_PARM_DESC(repeat_delay, "delay before key repeat started");
-static int repeat_period = 33;
-module_param(repeat_period, int, 0644);
-MODULE_PARM_DESC(repeat_period, "repeat period between "
-    "keypresses when key is down");
-
-static unsigned int disable_other_ir;
-module_param(disable_other_ir, int, 0644);
-MODULE_PARM_DESC(disable_other_ir, "disable full codes of "
-    "alternative remotes from other manufacturers");
-
 #define dprintk(fmt, arg...)	if (ir_debug) \
 	printk(KERN_DEBUG "%s/ir: " fmt, dev->name , ## arg)
 #define i2cdprintk(fmt, arg...)    if (ir_debug) \
 	printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg)
 
-/* Helper functions for RC5 and NEC decoding at GPIO16 or GPIO18 */
-static int saa7134_rc5_irq(struct saa7134_dev *dev);
-static int saa7134_nec_irq(struct saa7134_dev *dev);
+/* Helper function for raw decoding at GPIO16 or GPIO18 */
 static int saa7134_raw_decode_irq(struct saa7134_dev *dev);
-static void nec_task(unsigned long data);
-static void saa7134_nec_timer(unsigned long data);
 
 /* -------------------- GPIO generic keycode builder -------------------- */
 
 static int build_key(struct saa7134_dev *dev)
 {
-	struct card_ir *ir = dev->remote;
+	struct saa7134_card_ir *ir = dev->remote;
 	u32 gpio, data;
 
 	/* here comes the additional handshake steps for some cards */
@@ -104,25 +81,25 @@ static int build_key(struct saa7134_dev *dev)
 	switch (dev->board) {
 	case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
 		if (data == ir->mask_keycode)
-			ir_input_nokey(ir->dev, &ir->ir);
+			rc_keyup(ir->dev);
 		else
-			ir_input_keydown(ir->dev, &ir->ir, data);
+			rc_keydown_notimeout(ir->dev, data, 0);
 		return 0;
 	}
 
 	if (ir->polling) {
 		if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
 		    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
-			ir_input_keydown(ir->dev, &ir->ir, data);
+			rc_keydown_notimeout(ir->dev, data, 0);
 		} else {
-			ir_input_nokey(ir->dev, &ir->ir);
+			rc_keyup(ir->dev);
 		}
 	}
 	else {	/* IRQ driven mode - handle key press and release in one go */
 		if ((ir->mask_keydown  &&  (0 != (gpio & ir->mask_keydown))) ||
 		    (ir->mask_keyup    &&  (0 == (gpio & ir->mask_keyup)))) {
-			ir_input_keydown(ir->dev, &ir->ir, data);
-			ir_input_nokey(ir->dev, &ir->ir);
+			rc_keydown_notimeout(ir->dev, data, 0);
+			rc_keyup(ir->dev);
 		}
 	}
 
@@ -300,22 +277,12 @@ static int get_key_beholdm6xx(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 		i2cdprintk("read error\n");
 		return -EIO;
 	}
-	/* IR of this card normally decode signals NEC-standard from
-	 * - Sven IHOO MT 5.1R remote. xxyye718
-	 * - Sven DVD HD-10xx remote. xxyyf708
-	 * - BBK ...
-	 * - mayby others
-	 * So, skip not our, if disable full codes mode.
-	 */
-	if (data[10] != 0x6b && data[11] != 0x86 && disable_other_ir)
-		return 0;
 
-	/* Wrong data decode fix */
 	if (data[9] != (unsigned char)(~data[8]))
 		return 0;
 
-	*ir_key = data[9];
-	*ir_raw = data[9];
+	*ir_raw = ((data[10] << 16) | (data[11] << 8) | (data[9] << 0));
+	*ir_key = *ir_raw;
 
 	return 1;
 }
@@ -400,7 +367,7 @@ static int get_key_pinnacle_color(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
 
 void saa7134_input_irq(struct saa7134_dev *dev)
 {
-	struct card_ir *ir;
+	struct saa7134_card_ir *ir;
 
 	if (!dev || !dev->remote)
 		return;
@@ -409,12 +376,8 @@ void saa7134_input_irq(struct saa7134_dev *dev)
 	if (!ir->running)
 		return;
 
-	if (ir->nec_gpio) {
-		saa7134_nec_irq(dev);
-	} else if (!ir->polling && !ir->rc5_gpio && !ir->raw_decode) {
+	if (!ir->polling && !ir->raw_decode) {
 		build_key(dev);
-	} else if (ir->rc5_gpio) {
-		saa7134_rc5_irq(dev);
 	} else if (ir->raw_decode) {
 		saa7134_raw_decode_irq(dev);
 	}
@@ -423,7 +386,7 @@ void saa7134_input_irq(struct saa7134_dev *dev)
 static void saa7134_input_timer(unsigned long data)
 {
 	struct saa7134_dev *dev = (struct saa7134_dev *)data;
-	struct card_ir *ir = dev->remote;
+	struct saa7134_card_ir *ir = dev->remote;
 
 	build_key(dev);
 	mod_timer(&ir->timer, jiffies + msecs_to_jiffies(ir->polling));
@@ -432,57 +395,37 @@ static void saa7134_input_timer(unsigned long data)
 static void ir_raw_decode_timer_end(unsigned long data)
 {
 	struct saa7134_dev *dev = (struct saa7134_dev *)data;
-	struct card_ir *ir = dev->remote;
+	struct saa7134_card_ir *ir = dev->remote;
 
 	ir_raw_event_handle(dev->remote->dev);
 
-	ir->active = 0;
+	ir->active = false;
 }
 
 static int __saa7134_ir_start(void *priv)
 {
 	struct saa7134_dev *dev = priv;
-	struct card_ir *ir;
+	struct saa7134_card_ir *ir;
 
-	if (!dev)
+	if (!dev || !dev->remote)
 		return -EINVAL;
 
 	ir  = dev->remote;
-	if (!ir)
-		return -EINVAL;
-
 	if (ir->running)
 		return 0;
 
-	ir->running = 1;
+	ir->running = true;
+	ir->active = false;
+
 	if (ir->polling) {
 		setup_timer(&ir->timer, saa7134_input_timer,
 			    (unsigned long)dev);
-		ir->timer.expires  = jiffies + HZ;
+		ir->timer.expires = jiffies + HZ;
 		add_timer(&ir->timer);
-	} else if (ir->rc5_gpio) {
-		/* set timer_end for code completion */
-		init_timer(&ir->timer_end);
-		ir->timer_end.function = ir_rc5_timer_end;
-		ir->timer_end.data = (unsigned long)ir;
-		init_timer(&ir->timer_keyup);
-		ir->timer_keyup.function = ir_rc5_timer_keyup;
-		ir->timer_keyup.data = (unsigned long)ir;
-		ir->shift_by = 2;
-		ir->start = 0x2;
-		ir->addr = 0x17;
-		ir->rc5_key_timeout = ir_rc5_key_timeout;
-		ir->rc5_remote_gap = ir_rc5_remote_gap;
-	} else if (ir->nec_gpio) {
-		setup_timer(&ir->timer_keyup, saa7134_nec_timer,
-			    (unsigned long)dev);
-		tasklet_init(&ir->tlet, nec_task, (unsigned long)dev);
 	} else if (ir->raw_decode) {
 		/* set timer_end for code completion */
-		init_timer(&ir->timer_end);
-		ir->timer_end.function = ir_raw_decode_timer_end;
-		ir->timer_end.data = (unsigned long)dev;
-		ir->active = 0;
+		setup_timer(&ir->timer, ir_raw_decode_timer_end,
+			    (unsigned long)dev);
 	}
 
 	return 0;
@@ -491,29 +434,20 @@ static int __saa7134_ir_start(void *priv)
 static void __saa7134_ir_stop(void *priv)
 {
 	struct saa7134_dev *dev = priv;
-	struct card_ir *ir;
+	struct saa7134_card_ir *ir;
 
-	if (!dev)
+	if (!dev || !dev->remote)
 		return;
 
 	ir  = dev->remote;
-	if (!ir)
-		return;
-
 	if (!ir->running)
 		return;
-	if (dev->remote->polling)
-		del_timer_sync(&dev->remote->timer);
-	else if (ir->rc5_gpio)
-		del_timer_sync(&ir->timer_end);
-	else if (ir->nec_gpio)
-		tasklet_kill(&ir->tlet);
-	else if (ir->raw_decode) {
-		del_timer_sync(&ir->timer_end);
-		ir->active = 0;
-	}
 
-	ir->running = 0;
+	if (ir->polling || ir->raw_decode)
+		del_timer_sync(&ir->timer);
+
+	ir->active = false;
+	ir->running = false;
 
 	return;
 }
@@ -532,71 +466,33 @@ void saa7134_ir_stop(struct saa7134_dev *dev)
 		__saa7134_ir_stop(dev);
 }
 
-static int saa7134_ir_open(void *priv)
+static int saa7134_ir_open(struct rc_dev *rc)
 {
-	struct saa7134_dev *dev = priv;
+	struct saa7134_dev *dev = rc->priv;
 
 	dev->remote->users++;
 	return __saa7134_ir_start(dev);
 }
 
-static void saa7134_ir_close(void *priv)
+static void saa7134_ir_close(struct rc_dev *rc)
 {
-	struct saa7134_dev *dev = priv;
+	struct saa7134_dev *dev = rc->priv;
 
 	dev->remote->users--;
 	if (!dev->remote->users)
 		__saa7134_ir_stop(dev);
 }
 
-
-static int saa7134_ir_change_protocol(void *priv, u64 ir_type)
-{
-	struct saa7134_dev *dev = priv;
-	struct card_ir *ir = dev->remote;
-	u32 nec_gpio, rc5_gpio;
-
-	if (ir_type == IR_TYPE_RC5) {
-		dprintk("Changing protocol to RC5\n");
-		nec_gpio = 0;
-		rc5_gpio = 1;
-	} else if (ir_type == IR_TYPE_NEC) {
-		dprintk("Changing protocol to NEC\n");
-		nec_gpio = 1;
-		rc5_gpio = 0;
-	} else {
-		dprintk("IR protocol type %ud is not supported\n",
-			(unsigned)ir_type);
-		return -EINVAL;
-	}
-
-	if (ir->running) {
-		saa7134_ir_stop(dev);
-		ir->nec_gpio = nec_gpio;
-		ir->rc5_gpio = rc5_gpio;
-		saa7134_ir_start(dev);
-	} else {
-		ir->nec_gpio = nec_gpio;
-		ir->rc5_gpio = rc5_gpio;
-	}
-
-	return 0;
-}
-
 int saa7134_input_init1(struct saa7134_dev *dev)
 {
-	struct card_ir *ir;
-	struct input_dev *input_dev;
+	struct saa7134_card_ir *ir;
+	struct rc_dev *rc;
 	char *ir_codes = NULL;
 	u32 mask_keycode = 0;
 	u32 mask_keydown = 0;
 	u32 mask_keyup   = 0;
-	int polling      = 0;
-	int rc5_gpio	 = 0;
-	int nec_gpio	 = 0;
-	int raw_decode   = 0;
-	int allow_protocol_change = 0;
-	u64 ir_type = IR_TYPE_OTHER;
+	unsigned polling = 0;
+	bool raw_decode  = false;
 	int err;
 
 	if (dev->has_remote != SAA7134_REMOTE_GPIO)
@@ -661,14 +557,14 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
 		mask_keyup   = 0x0040000;
 		mask_keycode = 0xffff;
-		raw_decode   = 1;
+		raw_decode   = true;
 		break;
 	case SAA7134_BOARD_AVERMEDIA_M733A:
 		ir_codes     = RC_MAP_AVERMEDIA_M733A_RM_K6;
 		mask_keydown = 0x0040000;
 		mask_keyup   = 0x0040000;
 		mask_keycode = 0xffff;
-		raw_decode   = 1;
+		raw_decode   = true;
 		break;
 	case SAA7134_BOARD_AVERMEDIA_777:
 	case SAA7134_BOARD_AVERMEDIA_A16AR:
@@ -775,7 +671,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
 		mask_keyup   = 0x0040000;
 		mask_keycode = 0xffff;
-		raw_decode   = 1;
+		raw_decode   = true;
 		break;
 	case SAA7134_BOARD_ENCORE_ENLTV:
 	case SAA7134_BOARD_ENCORE_ENLTV_FM:
@@ -786,9 +682,10 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		break;
 	case SAA7134_BOARD_ENCORE_ENLTV_FM53:
 		ir_codes     = RC_MAP_ENCORE_ENLTV_FM53;
-		mask_keydown = 0x0040000;
-		mask_keycode = 0x00007f;
-		nec_gpio = 1;
+		mask_keydown = 0x0040000;	/* Enable GPIO18 line on both edges */
+		mask_keyup   = 0x0040000;
+		mask_keycode = 0xffff;
+		raw_decode   = true;
 		break;
 	case SAA7134_BOARD_10MOONSTVMASTER3:
 		ir_codes     = RC_MAP_ENCORE_ENLTV;
@@ -824,6 +721,11 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keyup   = 0x020000;
 		polling      = 50; /* ms */
 		break;
+	case SAA7134_BOARD_VIDEOMATE_M1F:
+		ir_codes     = RC_MAP_VIDEOMATE_M1F;
+		mask_keycode = 0x0ff00;
+		mask_keyup   = 0x040000;
+		break;
 	}
 	if (NULL == ir_codes) {
 		printk("%s: Oops: IR config error [card=%d]\n",
@@ -832,24 +734,20 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	}
 
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-	input_dev = input_allocate_device();
-	if (!ir || !input_dev) {
+	rc = rc_allocate_device();
+	if (!ir || !rc) {
 		err = -ENOMEM;
 		goto err_out_free;
 	}
 
-	ir->dev = input_dev;
+	ir->dev = rc;
 	dev->remote = ir;
 
-	ir->running = 0;
-
 	/* init hardware-specific stuff */
 	ir->mask_keycode = mask_keycode;
 	ir->mask_keydown = mask_keydown;
 	ir->mask_keyup   = mask_keyup;
 	ir->polling      = polling;
-	ir->rc5_gpio	 = rc5_gpio;
-	ir->nec_gpio	 = nec_gpio;
 	ir->raw_decode	 = raw_decode;
 
 	/* init input device */
@@ -858,47 +756,35 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
 		 pci_name(dev->pci));
 
-
-	ir->props.priv = dev;
-	ir->props.open = saa7134_ir_open;
-	ir->props.close = saa7134_ir_close;
-
+	rc->priv = dev;
+	rc->open = saa7134_ir_open;
+	rc->close = saa7134_ir_close;
 	if (raw_decode)
-		ir->props.driver_type = RC_DRIVER_IR_RAW;
-
-	if (!raw_decode && allow_protocol_change) {
-		ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
-		ir->props.change_protocol = saa7134_ir_change_protocol;
-	}
-
-	err = ir_input_init(input_dev, &ir->ir, ir_type);
-	if (err < 0)
-		goto err_out_free;
+		rc->driver_type = RC_DRIVER_IR_RAW;
 
-	input_dev->name = ir->name;
-	input_dev->phys = ir->phys;
-	input_dev->id.bustype = BUS_PCI;
-	input_dev->id.version = 1;
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	rc->input_id.bustype = BUS_PCI;
+	rc->input_id.version = 1;
 	if (dev->pci->subsystem_vendor) {
-		input_dev->id.vendor  = dev->pci->subsystem_vendor;
-		input_dev->id.product = dev->pci->subsystem_device;
+		rc->input_id.vendor  = dev->pci->subsystem_vendor;
+		rc->input_id.product = dev->pci->subsystem_device;
 	} else {
-		input_dev->id.vendor  = dev->pci->vendor;
-		input_dev->id.product = dev->pci->device;
+		rc->input_id.vendor  = dev->pci->vendor;
+		rc->input_id.product = dev->pci->device;
 	}
-	input_dev->dev.parent = &dev->pci->dev;
+	rc->dev.parent = &dev->pci->dev;
+	rc->map_name = ir_codes;
+	rc->driver_name = MODULE_NAME;
 
-	err = ir_input_register(ir->dev, ir_codes, &ir->props, MODULE_NAME);
+	err = rc_register_device(rc);
 	if (err)
 		goto err_out_free;
 
-	/* the remote isn't as bouncy as a keyboard */
-	ir->dev->rep[REP_DELAY] = repeat_delay;
-	ir->dev->rep[REP_PERIOD] = repeat_period;
-
 	return 0;
 
 err_out_free:
+	rc_free_device(rc);
 	dev->remote = NULL;
 	kfree(ir);
 	return err;
@@ -910,7 +796,7 @@ void saa7134_input_fini(struct saa7134_dev *dev)
 		return;
 
 	saa7134_ir_stop(dev);
-	ir_input_unregister(dev->remote->dev);
+	rc_unregister_device(dev->remote->dev);
 	kfree(dev->remote);
 	dev->remote = NULL;
 }
@@ -918,14 +804,12 @@ void saa7134_input_fini(struct saa7134_dev *dev)
 void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 {
 	struct i2c_board_info info;
-
 	struct i2c_msg msg_msi = {
 		.addr = 0x50,
 		.flags = I2C_M_RD,
 		.len = 0,
 		.buf = NULL,
 	};
-
 	int rc;
 
 	if (disable_ir) {
@@ -972,7 +856,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 		   an existing device. Weird...
 		   REVISIT: might no longer be needed */
 		rc = i2c_transfer(&dev->i2c_adap, &msg_msi, 1);
-		dprintk(KERN_DEBUG "probe 0x%02x @ %s: %s\n",
+		dprintk("probe 0x%02x @ %s: %s\n",
 			msg_msi.addr, dev->i2c_adap.name,
 			(1 == rc) ? "yes" : "no");
 		break;
@@ -1000,7 +884,7 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 		dev->init_data.name = "BeholdTV";
 		dev->init_data.get_key = get_key_beholdm6xx;
 		dev->init_data.ir_codes = RC_MAP_BEHOLD;
-		dev->init_data.type = IR_TYPE_NEC;
+		dev->init_data.type = RC_TYPE_NEC;
 		info.addr = 0x2d;
 		break;
 	case SAA7134_BOARD_AVERMEDIA_CARDBUS_501:
@@ -1025,8 +909,8 @@ void saa7134_probe_i2c_ir(struct saa7134_dev *dev)
 
 static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 {
-	struct card_ir	*ir = dev->remote;
-	unsigned long 	timeout;
+	struct saa7134_card_ir *ir = dev->remote;
+	unsigned long timeout;
 	int space;
 
 	/* Generate initial event */
@@ -1035,7 +919,6 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 	space = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
 	ir_raw_event_store_edge(dev->remote->dev, space ? IR_SPACE : IR_PULSE);
 
-
 	/*
 	 * Wait 15 ms from the start of the first IR event before processing
 	 * the event. This time is enough for NEC protocol. May need adjustments
@@ -1043,173 +926,9 @@ static int saa7134_raw_decode_irq(struct saa7134_dev *dev)
 	 */
 	if (!ir->active) {
 		timeout = jiffies + jiffies_to_msecs(15);
-		mod_timer(&ir->timer_end, timeout);
-		ir->active = 1;
+		mod_timer(&ir->timer, timeout);
+		ir->active = true;
 	}
 
 	return 1;
 }
-
-static int saa7134_rc5_irq(struct saa7134_dev *dev)
-{
-	struct card_ir *ir = dev->remote;
-	struct timeval tv;
-	u32 gap;
-	unsigned long current_jiffies, timeout;
-
-	/* get time of bit */
-	current_jiffies = jiffies;
-	do_gettimeofday(&tv);
-
-	/* avoid overflow with gap >1s */
-	if (tv.tv_sec - ir->base_time.tv_sec > 1) {
-		gap = 200000;
-	} else {
-		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-		    tv.tv_usec - ir->base_time.tv_usec;
-	}
-
-	/* active code => add bit */
-	if (ir->active) {
-		/* only if in the code (otherwise spurious IRQ or timer
-		   late) */
-		if (ir->last_bit < 28) {
-			ir->last_bit = (gap - ir_rc5_remote_gap / 2) /
-			    ir_rc5_remote_gap;
-			ir->code |= 1 << ir->last_bit;
-		}
-		/* starting new code */
-	} else {
-		ir->active = 1;
-		ir->code = 0;
-		ir->base_time = tv;
-		ir->last_bit = 0;
-
-		timeout = current_jiffies + (500 + 30 * HZ) / 1000;
-		mod_timer(&ir->timer_end, timeout);
-	}
-
-	return 1;
-}
-
-/* On NEC protocol, One has 2.25 ms, and zero has 1.125 ms
-   The first pulse (start) has 9 + 4.5 ms
- */
-
-static void saa7134_nec_timer(unsigned long data)
-{
-	struct saa7134_dev *dev = (struct saa7134_dev *) data;
-	struct card_ir *ir = dev->remote;
-
-	dprintk("Cancel key repeat\n");
-
-	ir_input_nokey(ir->dev, &ir->ir);
-}
-
-static void nec_task(unsigned long data)
-{
-	struct saa7134_dev *dev = (struct saa7134_dev *) data;
-	struct card_ir *ir;
-	struct timeval tv;
-	int count, pulse, oldpulse, gap;
-	u32 ircode = 0, not_code = 0;
-	int ngap = 0;
-
-	if (!data) {
-		printk(KERN_ERR "saa713x/ir: Can't recover dev struct\n");
-		/* GPIO will be kept disabled */
-		return;
-	}
-
-	ir = dev->remote;
-
-	/* rising SAA7134_GPIO_GPRESCAN reads the status */
-	saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-	saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-
-	oldpulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2) & ir->mask_keydown;
-	pulse = oldpulse;
-
-	do_gettimeofday(&tv);
-	ir->base_time = tv;
-
-	/* Decode NEC pulsecode. This code can take up to 76.5 ms to run.
-	   Unfortunately, using IRQ to decode pulse didn't work, since it uses
-	   a pulse train of 38KHz. This means one pulse on each 52 us
-	 */
-	do {
-		/* Wait until the end of pulse/space or 5 ms */
-		for (count = 0; count < 500; count++)  {
-			udelay(10);
-			/* rising SAA7134_GPIO_GPRESCAN reads the status */
-			saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-			saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
-			pulse = saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2)
-				& ir->mask_keydown;
-			if (pulse != oldpulse)
-				break;
-		}
-
-		do_gettimeofday(&tv);
-		gap = 1000000 * (tv.tv_sec - ir->base_time.tv_sec) +
-				tv.tv_usec - ir->base_time.tv_usec;
-
-		if (!pulse) {
-			/* Bit 0 has 560 us, while bit 1 has 1120 us.
-			   Do something only if bit == 1
-			 */
-			if (ngap && (gap > 560 + 280)) {
-				unsigned int shift = ngap - 1;
-
-				/* Address first, then command */
-				if (shift < 8) {
-					shift += 8;
-					ircode |= 1 << shift;
-				} else if (shift < 16) {
-					not_code |= 1 << shift;
-				} else if (shift < 24) {
-					shift -= 16;
-					ircode |= 1 << shift;
-				} else {
-					shift -= 24;
-					not_code |= 1 << shift;
-				}
-			}
-			ngap++;
-		}
-
-
-		ir->base_time = tv;
-
-		/* TIMEOUT - Long pulse */
-		if (gap >= 5000)
-			break;
-		oldpulse = pulse;
-	} while (ngap < 32);
-
-	if (ngap == 32) {
-		/* FIXME: should check if not_code == ~ircode */
-		ir->code = ir_extract_bits(ircode, ir->mask_keycode);
-
-		dprintk("scancode = 0x%02x (code = 0x%02x, notcode= 0x%02x)\n",
-			 ir->code, ircode, not_code);
-
-		ir_input_keydown(ir->dev, &ir->ir, ir->code);
-	} else
-		dprintk("Repeat last key\n");
-
-	/* Keep repeating the last key */
-	mod_timer(&ir->timer_keyup, jiffies + msecs_to_jiffies(150));
-
-	saa_setl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
-}
-
-static int saa7134_nec_irq(struct saa7134_dev *dev)
-{
-	struct card_ir *ir = dev->remote;
-
-	saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
-	tasklet_schedule(&ir->tlet);
-
-	return 1;
-}
diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c
index 3e7d2fd1688..57e646bb48b 100644
--- a/drivers/media/video/saa7134/saa7134-tvaudio.c
+++ b/drivers/media/video/saa7134/saa7134-tvaudio.c
@@ -550,16 +550,16 @@ static int tvaudio_thread(void *data)
 		} else if (0 != dev->last_carrier) {
 			/* no carrier -- try last detected one as fallback */
 			carrier = dev->last_carrier;
-			dprintk(KERN_WARNING "%s/audio: audio carrier scan failed, "
-			       "using %d.%03d MHz [last detected]\n",
-			       dev->name, carrier/1000, carrier%1000);
+			dprintk("audio carrier scan failed, "
+				"using %d.%03d MHz [last detected]\n",
+				carrier/1000, carrier%1000);
 
 		} else {
 			/* no carrier + no fallback -- use default */
 			carrier = default_carrier;
-			dprintk(KERN_WARNING "%s/audio: audio carrier scan failed, "
-			       "using %d.%03d MHz [default]\n",
-			       dev->name, carrier/1000, carrier%1000);
+			dprintk("audio carrier scan failed, "
+				"using %d.%03d MHz [default]\n",
+				carrier/1000, carrier%1000);
 		}
 		tvaudio_setcarrier(dev,carrier,carrier);
 		dev->automute = 0;
diff --git a/drivers/media/video/saa7134/saa7134-video.c b/drivers/media/video/saa7134/saa7134-video.c
index f0b1573137f..776ba2dd7f9 100644
--- a/drivers/media/video/saa7134/saa7134-video.c
+++ b/drivers/media/video/saa7134/saa7134-video.c
@@ -30,7 +30,7 @@
 #include "saa7134-reg.h"
 #include "saa7134.h"
 #include <media/v4l2-common.h>
-#include <media/rds.h>
+#include <media/saa6588.h>
 
 /* ------------------------------------------------------------------ */
 
@@ -1459,7 +1459,7 @@ static int video_release(struct file *file)
 {
 	struct saa7134_fh  *fh  = file->private_data;
 	struct saa7134_dev *dev = fh->dev;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 	unsigned long flags;
 
 	/* turn off overlay */
@@ -1494,7 +1494,7 @@ static int video_release(struct file *file)
 
 	saa_call_all(dev, core, s_power, 0);
 	if (fh->radio)
-		saa_call_all(dev, core, ioctl, RDS_CMD_CLOSE, &cmd);
+		saa_call_all(dev, core, ioctl, SAA6588_CMD_CLOSE, &cmd);
 
 	/* free stuff */
 	videobuf_mmap_free(&fh->cap);
@@ -1520,14 +1520,14 @@ static ssize_t radio_read(struct file *file, char __user *data,
 {
 	struct saa7134_fh *fh = file->private_data;
 	struct saa7134_dev *dev = fh->dev;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 
 	cmd.block_count = count/3;
 	cmd.buffer = data;
 	cmd.instance = file;
 	cmd.result = -ENODEV;
 
-	saa_call_all(dev, core, ioctl, RDS_CMD_READ, &cmd);
+	saa_call_all(dev, core, ioctl, SAA6588_CMD_READ, &cmd);
 
 	return cmd.result;
 }
@@ -1536,12 +1536,12 @@ static unsigned int radio_poll(struct file *file, poll_table *wait)
 {
 	struct saa7134_fh *fh = file->private_data;
 	struct saa7134_dev *dev = fh->dev;
-	struct rds_command cmd;
+	struct saa6588_command cmd;
 
 	cmd.instance = file;
 	cmd.event_list = wait;
 	cmd.result = -ENODEV;
-	saa_call_all(dev, core, ioctl, RDS_CMD_POLL, &cmd);
+	saa_call_all(dev, core, ioctl, SAA6588_CMD_POLL, &cmd);
 
 	return cmd.result;
 }
@@ -1748,7 +1748,6 @@ static int saa7134_enum_input(struct file *file, void *priv,
 		return -EINVAL;
 	if (NULL == card_in(dev, i->index).name)
 		return -EINVAL;
-	memset(i, 0, sizeof(*i));
 	i->index = n;
 	i->type  = V4L2_INPUT_TYPE_CAMERA;
 	strcpy(i->name, card_in(dev, n).name);
@@ -2211,14 +2210,6 @@ static int saa7134_overlay(struct file *file, void *f, unsigned int on)
 	return 0;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct saa7134_fh *fh = file->private_data;
-	return videobuf_cgmbuf(saa7134_queue(fh), mbuf, 8);
-}
-#endif
-
 static int saa7134_reqbufs(struct file *file, void *priv,
 					struct v4l2_requestbuffers *p)
 {
@@ -2456,9 +2447,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_streamoff		= saa7134_streamoff,
 	.vidioc_g_tuner			= saa7134_g_tuner,
 	.vidioc_s_tuner			= saa7134_s_tuner,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf			= vidiocgmbuf,
-#endif
 	.vidioc_g_crop			= saa7134_g_crop,
 	.vidioc_s_crop			= saa7134_s_crop,
 	.vidioc_g_fbuf			= saa7134_g_fbuf,
diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h
index d3b6a196e5d..5b0a347b0b8 100644
--- a/drivers/media/video/saa7134/saa7134.h
+++ b/drivers/media/video/saa7134/saa7134.h
@@ -37,7 +37,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/tuner.h>
-#include <media/ir-common.h>
+#include <media/rc-core.h>
 #include <media/ir-kbd-i2c.h>
 #include <media/videobuf-dma-sg.h>
 #include <sound/core.h>
@@ -119,6 +119,26 @@ struct saa7134_format {
 	unsigned int   uvswap:1;
 };
 
+struct saa7134_card_ir {
+	struct rc_dev		*dev;
+
+	char                    name[32];
+	char                    phys[32];
+	unsigned                users;
+
+	u32			polling;
+        u32			last_gpio;
+        u32			mask_keycode, mask_keydown, mask_keyup;
+
+	bool                    running;
+	bool			active;
+
+	struct timer_list       timer;
+
+	/* IR core raw decoding */
+	u32                     raw_decode;
+};
+
 /* ----------------------------------------------------------- */
 /* card configuration                                          */
 
@@ -305,6 +325,8 @@ struct saa7134_format {
 #define SAA7134_BOARD_BEHOLD_A7             179
 #define SAA7134_BOARD_AVERMEDIA_M733A       180
 #define SAA7134_BOARD_TECHNOTREND_BUDGET_T3000 181
+#define SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG 182
+#define SAA7134_BOARD_VIDEOMATE_M1F         183
 
 #define SAA7134_MAXBOARDS 32
 #define SAA7134_INPUT_MAX 8
@@ -529,7 +551,7 @@ struct saa7134_dev {
 
 	/* infrared remote */
 	int                        has_remote;
-	struct card_ir		   *remote;
+	struct saa7134_card_ir     *remote;
 
 	/* pci i/o */
 	char                       name[32];
diff --git a/drivers/media/video/saa7164/saa7164-api.c b/drivers/media/video/saa7164/saa7164-api.c
index ad3bc415417..bd86d970f4c 100644
--- a/drivers/media/video/saa7164/saa7164-api.c
+++ b/drivers/media/video/saa7164/saa7164-api.c
@@ -40,9 +40,8 @@ int saa7164_api_get_load_info(struct saa7164_dev *dev, struct tmFwInfoStruct *i)
 
 	ret = saa7164_cmd_send(dev, 0, GET_CUR,
 		GET_FW_STATUS_CONTROL, sizeof(struct tmFwInfoStruct), i);
-	if (ret != SAA_OK) {
+	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
-	}
 
 	printk(KERN_INFO "saa7164[%d]-CPU: %d percent", dev->nr, i->CPULoad);
 
@@ -63,14 +62,15 @@ int saa7164_api_collect_debug(struct saa7164_dev *dev)
 
 		ret = saa7164_cmd_send(dev, 0, GET_CUR,
 			GET_DEBUG_DATA_CONTROL, sizeof(d), &d);
-		if (ret != SAA_OK) {
-			printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
-		}
+		if (ret != SAA_OK)
+			printk(KERN_ERR "%s() error, ret = 0x%x\n",
+				__func__, ret);
 
 		if (d.dwResult != SAA_OK)
 			break;
 
-		printk(KERN_INFO "saa7164[%d]-FWMSG: %s", dev->nr, d.ucDebugData);
+		printk(KERN_INFO "saa7164[%d]-FWMSG: %s", dev->nr,
+			d.ucDebugData);
 	}
 
 	return 0;
@@ -86,9 +86,9 @@ int saa7164_api_set_debug(struct saa7164_dev *dev, u8 level)
 	/* Retrieve current state */
 	ret = saa7164_cmd_send(dev, 0, GET_CUR,
 		SET_DEBUG_LEVEL_CONTROL, sizeof(lvl), &lvl);
-	if (ret != SAA_OK) {
+	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
-	}
+
 	dprintk(DBGLVL_API, "%s() Was %d\n", __func__, lvl.dwDebugLevel);
 
 	lvl.dwDebugLevel = level;
@@ -96,9 +96,8 @@ int saa7164_api_set_debug(struct saa7164_dev *dev, u8 level)
 	/* set new state */
 	ret = saa7164_cmd_send(dev, 0, SET_CUR,
 		SET_DEBUG_LEVEL_CONTROL, sizeof(lvl), &lvl);
-	if (ret != SAA_OK) {
+	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
-	}
 
 	return ret;
 }
@@ -152,8 +151,10 @@ int saa7164_api_set_vbi_format(struct saa7164_port *port)
 				dprintk(DBGLVL_API, "SET/COMMIT Verified\n");
 
 			dprintk(DBGLVL_API, "rsp.bmHint = 0x%x\n", rsp.bmHint);
-			dprintk(DBGLVL_API, "rsp.bFormatIndex = 0x%x\n", rsp.bFormatIndex);
-			dprintk(DBGLVL_API, "rsp.bFrameIndex = 0x%x\n", rsp.bFrameIndex);
+			dprintk(DBGLVL_API, "rsp.bFormatIndex = 0x%x\n",
+				rsp.bFormatIndex);
+			dprintk(DBGLVL_API, "rsp.bFrameIndex = 0x%x\n",
+				rsp.bFrameIndex);
 		} else
 			printk(KERN_ERR "%s() compare failed\n", __func__);
 	}
@@ -210,14 +211,17 @@ int saa7164_api_set_encoder(struct saa7164_port *port)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
 	/* Establish video bitrates */
-	if (port->encoder_params.bitrate_mode == V4L2_MPEG_VIDEO_BITRATE_MODE_CBR)
+	if (port->encoder_params.bitrate_mode ==
+		V4L2_MPEG_VIDEO_BITRATE_MODE_CBR)
 		vb.ucVideoBitRateMode = EU_VIDEO_BIT_RATE_MODE_CONSTANT;
 	else
 		vb.ucVideoBitRateMode = EU_VIDEO_BIT_RATE_MODE_VARIABLE_PEAK;
 	vb.dwVideoBitRate = port->encoder_params.bitrate;
 	vb.dwVideoBitRatePeak = port->encoder_params.bitrate_peak;
 	ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR,
-		EU_VIDEO_BIT_RATE_CONTROL, sizeof(struct tmComResEncVideoBitRate), &vb);
+		EU_VIDEO_BIT_RATE_CONTROL,
+		sizeof(struct tmComResEncVideoBitRate),
+		&vb);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
@@ -226,9 +230,12 @@ int saa7164_api_set_encoder(struct saa7164_port *port)
 	ab.dwAudioBitRate = 384000;
 	ab.dwAudioBitRatePeak = ab.dwAudioBitRate;
 	ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, SET_CUR,
-		EU_AUDIO_BIT_RATE_CONTROL, sizeof(struct tmComResEncAudioBitRate), &ab);
+		EU_AUDIO_BIT_RATE_CONTROL,
+		sizeof(struct tmComResEncAudioBitRate),
+		&ab);
 	if (ret != SAA_OK)
-		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
+		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__,
+			ret);
 
 	saa7164_api_set_aspect_ratio(port);
 	saa7164_api_set_gop_size(port);
@@ -244,7 +251,8 @@ int saa7164_api_get_encoder(struct saa7164_port *port)
 	struct tmComResEncVideoInputAspectRatio ar;
 	int ret;
 
-	dprintk(DBGLVL_ENC, "%s() unitid=0x%x\n", __func__, port->hwcfg.sourceid);
+	dprintk(DBGLVL_ENC, "%s() unitid=0x%x\n", __func__,
+		port->hwcfg.sourceid);
 
 	port->encoder_profile = 0;
 	port->video_format = 0;
@@ -257,7 +265,8 @@ int saa7164_api_get_encoder(struct saa7164_port *port)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
 	ret = saa7164_cmd_send(port->dev, port->hwcfg.sourceid, GET_CUR,
-		EU_VIDEO_RESOLUTION_CONTROL, sizeof(u8), &port->video_resolution);
+		EU_VIDEO_RESOLUTION_CONTROL, sizeof(u8),
+		&port->video_resolution);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
@@ -294,13 +303,20 @@ int saa7164_api_get_encoder(struct saa7164_port *port)
 	dprintk(DBGLVL_ENC, "video_format    = %d\n", port->video_format);
 	dprintk(DBGLVL_ENC, "audio_format    = %d\n", port->audio_format);
 	dprintk(DBGLVL_ENC, "video_resolution= %d\n", port->video_resolution);
-	dprintk(DBGLVL_ENC, "v.ucVideoBitRateMode = %d\n", v.ucVideoBitRateMode);
-	dprintk(DBGLVL_ENC, "v.dwVideoBitRate     = %d\n", v.dwVideoBitRate);
-	dprintk(DBGLVL_ENC, "v.dwVideoBitRatePeak = %d\n", v.dwVideoBitRatePeak);
-	dprintk(DBGLVL_ENC, "a.ucVideoBitRateMode = %d\n", a.ucAudioBitRateMode);
-	dprintk(DBGLVL_ENC, "a.dwVideoBitRate     = %d\n", a.dwAudioBitRate);
-	dprintk(DBGLVL_ENC, "a.dwVideoBitRatePeak = %d\n", a.dwAudioBitRatePeak);
-	dprintk(DBGLVL_ENC, "aspect.width / height = %d:%d\n", ar.width, ar.height);
+	dprintk(DBGLVL_ENC, "v.ucVideoBitRateMode = %d\n",
+		v.ucVideoBitRateMode);
+	dprintk(DBGLVL_ENC, "v.dwVideoBitRate     = %d\n",
+		v.dwVideoBitRate);
+	dprintk(DBGLVL_ENC, "v.dwVideoBitRatePeak = %d\n",
+		v.dwVideoBitRatePeak);
+	dprintk(DBGLVL_ENC, "a.ucVideoBitRateMode = %d\n",
+		a.ucAudioBitRateMode);
+	dprintk(DBGLVL_ENC, "a.dwVideoBitRate     = %d\n",
+		a.dwAudioBitRate);
+	dprintk(DBGLVL_ENC, "a.dwVideoBitRatePeak = %d\n",
+		a.dwAudioBitRatePeak);
+	dprintk(DBGLVL_ENC, "aspect.width / height = %d:%d\n",
+		ar.width, ar.height);
 
 	return ret;
 }
@@ -439,7 +455,8 @@ int saa7164_api_set_videomux(struct saa7164_port *port)
 
 	/* Audio Mux */
 	ret = saa7164_cmd_send(port->dev, port->audfeat.sourceid, SET_CUR,
-		SU_INPUT_SELECT_CONTROL, sizeof(u8), &inputs[port->mux_input - 1]);
+		SU_INPUT_SELECT_CONTROL, sizeof(u8),
+		&inputs[port->mux_input - 1]);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
@@ -492,7 +509,8 @@ int saa7164_api_set_audio_volume(struct saa7164_port *port, s8 level)
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
-	dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__, level, min, max, v);
+	dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__,
+		level, min, max, v);
 
 	v = level;
 	if (v < min)
@@ -517,7 +535,8 @@ int saa7164_api_set_audio_volume(struct saa7164_port *port, s8 level)
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
-	dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__, level, min, max, v);
+	dprintk(DBGLVL_API, "%s(%d) min=%d max=%d cur=%d\n", __func__,
+		level, min, max, v);
 
 	return ret;
 }
@@ -539,7 +558,8 @@ int saa7164_api_set_audio_std(struct saa7164_port *port)
 	lvl.ucSAP_Level = TMHW_LEV_ADJ_SAPLEV_DEFAULT;
 	lvl.ucADC_Level = TMHW_LEV_ADJ_ADCLEV_DEFAULT;
 	ret = saa7164_cmd_send(port->dev, port->audfeat.unitid, SET_CUR,
-		AUDIO_DEFAULT_CONTROL, sizeof(struct tmComResAudioDefaults), &lvl);
+		AUDIO_DEFAULT_CONTROL, sizeof(struct tmComResAudioDefaults),
+		&lvl);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
 
@@ -555,7 +575,8 @@ int saa7164_api_set_audio_std(struct saa7164_port *port)
 	ret = saa7164_cmd_send(port->dev, port->tunerunit.unitid, SET_CUR,
 		TU_STANDARD_CONTROL, sizeof(tvaudio), &tvaudio);
 	if (ret != SAA_OK)
-		printk(KERN_ERR "%s() TU_STANDARD_CONTROL error, ret = 0x%x\n", __func__, ret);
+		printk(KERN_ERR "%s() TU_STANDARD_CONTROL error, ret = 0x%x\n",
+			__func__, ret);
 	return ret;
 }
 
@@ -575,7 +596,9 @@ int saa7164_api_set_audio_detection(struct saa7164_port *port, int autodetect)
 	ret = saa7164_cmd_send(port->dev, port->tunerunit.unitid, SET_CUR,
 		TU_STANDARD_AUTO_CONTROL, sizeof(p), &p);
 	if (ret != SAA_OK)
-		printk(KERN_ERR "%s() TU_STANDARD_AUTO_CONTROL error, ret = 0x%x\n", __func__, ret);
+		printk(KERN_ERR
+			"%s() TU_STANDARD_AUTO_CONTROL error, ret = 0x%x\n",
+			__func__, ret);
 
 	return ret;
 }
@@ -646,9 +669,9 @@ int saa7164_api_set_dif(struct saa7164_port *port, u8 reg, u8 val)
 		EXU_REGISTER_ACCESS_CONTROL, len, &buf);
 	if (ret != SAA_OK)
 		printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
-
-	//saa7164_dumphex16(dev, buf, 16);
-
+#if 0
+	saa7164_dumphex16(dev, buf, 16);
+#endif
 	return ret == SAA_OK ? 0 : -EIO;
 }
 
@@ -696,7 +719,8 @@ int saa7164_api_configure_dif(struct saa7164_port *port, u32 std)
 	} else {
 		/* Unknown standard, assume DTV */
 		dprintk(DBGLVL_API, " Unknown (assuming DTV)\n");
-		saa7164_api_set_dif(port, 0x00, 0x80); /* Undefined Video Standard */
+		/* Undefinded Video Standard */
+		saa7164_api_set_dif(port, 0x00, 0x80);
 		agc_disable = 1;
 	}
 
@@ -933,7 +957,7 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 		if (hdr->type != CS_INTERFACE)
 			return SAA_ERR_NOT_SUPPORTED;
 
-		dprintk(DBGLVL_API, "@ 0x%x = \n", idx);
+		dprintk(DBGLVL_API, "@ 0x%x =\n", idx);
 		switch (hdr->subtype) {
 		case GENERAL_REQUEST:
 			dprintk(DBGLVL_API, " GENERAL_REQUEST\n");
@@ -1085,7 +1109,8 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 						vbiport = &dev->ports[SAA7164_PORT_VBI2];
 					memcpy(&vbiport->hwcfg, vcoutputtermhdr,
 						sizeof(*vcoutputtermhdr));
-					memcpy(&vbiport->vbi_fmt_ntsc, vbifmt, sizeof(*vbifmt));
+					memcpy(&vbiport->vbi_fmt_ntsc, vbifmt,
+						sizeof(*vbifmt));
 					saa7164_api_configure_port_vbi(dev,
 						vbiport);
 					break;
@@ -1134,7 +1159,9 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 					encport = &dev->ports[SAA7164_PORT_ENC2];
 				memcpy(&encport->tunerunit, tunerunithdr,
 					sizeof(struct tmComResTunerDescrHeader));
-				dprintk(DBGLVL_API, "  (becomes dev->enc[%d] tuner)\n", encport->nr);
+				dprintk(DBGLVL_API,
+					"  (becomes dev->enc[%d] tuner)\n",
+					encport->nr);
 			}
 			break;
 		case VC_SELECTOR_UNIT:
@@ -1163,7 +1190,8 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 					encport = &dev->ports[SAA7164_PORT_ENC2];
 				memcpy(&encport->vidproc, pdh,
 					sizeof(struct tmComResProcDescrHeader));
-				dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n", encport->nr);
+				dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n",
+					encport->nr);
 			}
 			break;
 		case FEATURE_UNIT:
@@ -1181,15 +1209,18 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 				encport = &dev->ports[SAA7164_PORT_ENC2];
 			memcpy(&encport->audfeat, afd,
 				sizeof(struct tmComResAFeatureDescrHeader));
-			dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n", encport->nr);
+			dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n",
+				encport->nr);
 			break;
 		case ENCODER_UNIT:
 			edh = (struct tmComResEncoderDescrHeader *)(buf + idx);
 			dprintk(DBGLVL_API, " ENCODER_UNIT\n");
 			dprintk(DBGLVL_API, "  subtype = 0x%x\n", edh->subtype);
 			dprintk(DBGLVL_API, "  unitid = 0x%x\n", edh->unitid);
-			dprintk(DBGLVL_API, "  vsourceid = 0x%x\n", edh->vsourceid);
-			dprintk(DBGLVL_API, "  asourceid = 0x%x\n", edh->asourceid);
+			dprintk(DBGLVL_API, "  vsourceid = 0x%x\n",
+			edh->vsourceid);
+			dprintk(DBGLVL_API, "  asourceid = 0x%x\n",
+				edh->asourceid);
 			dprintk(DBGLVL_API, "  iunit = 0x%x\n", edh->iunit);
 			if (edh->iunit == edh->unitid) {
 				if (currpath == 1)
@@ -1198,7 +1229,9 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 					encport = &dev->ports[SAA7164_PORT_ENC2];
 				memcpy(&encport->encunit, edh,
 					sizeof(struct tmComResEncoderDescrHeader));
-				dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n", encport->nr);
+				dprintk(DBGLVL_API,
+					"  (becomes dev->enc[%d])\n",
+					encport->nr);
 			}
 			break;
 		case EXTENSION_UNIT:
@@ -1262,7 +1295,9 @@ int saa7164_api_dump_subdevs(struct saa7164_dev *dev, u8 *buf, int len)
 					encport = &dev->ports[SAA7164_PORT_ENC2];
 				memcpy(&encport->ifunit, exthdr,
 					sizeof(struct tmComResExtDevDescrHeader));
-				dprintk(DBGLVL_API, "  (becomes dev->enc[%d])\n", encport->nr);
+				dprintk(DBGLVL_API,
+					"  (becomes dev->enc[%d])\n",
+					encport->nr);
 			}
 			break;
 		case PVC_INFRARED_UNIT:
diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c
index 7230912acc7..ddd25211c9e 100644
--- a/drivers/media/video/saa7164/saa7164-buffer.c
+++ b/drivers/media/video/saa7164/saa7164-buffer.c
@@ -24,46 +24,46 @@
 #include "saa7164.h"
 
 /* The PCI address space for buffer handling looks like this:
-
- +-u32 wide-------------+
- |                      +
- +-u64 wide------------------------------------+
- +                                             +
- +----------------------+
- | CurrentBufferPtr     + Pointer to current PCI buffer >-+
- +----------------------+                                 |
- | Unused               +                                 |
- +----------------------+                                 |
- | Pitch                + = 188 (bytes)                   |
- +----------------------+                                 |
- | PCI buffer size      + = pitch * number of lines (312) |
- +----------------------+                                 |
- |0| Buf0 Write Offset  +                                 |
- +----------------------+                                 v
- |1| Buf1 Write Offset  +                                 |
- +----------------------+                                 |
- |2| Buf2 Write Offset  +                                 |
- +----------------------+                                 |
- |3| Buf3 Write Offset  +                                 |
- +----------------------+                                 |
- ... More write offsets                                   |
- +---------------------------------------------+          |
- +0| set of ptrs to PCI pagetables             +          |
- +---------------------------------------------+          |
- +1| set of ptrs to PCI pagetables             + <--------+
- +---------------------------------------------+
- +2| set of ptrs to PCI pagetables             +
- +---------------------------------------------+
- +3| set of ptrs to PCI pagetables             + >--+
- +---------------------------------------------+    |
- ... More buffer pointers                           |  +----------------+
-						    +->| pt[0] TS data  |
-						    |  +----------------+
-						    |
-						    |  +----------------+
-						    +->| pt[1] TS data  |
-						    |  +----------------+
-						    | etc
+ *
+ * +-u32 wide-------------+
+ * |                      +
+ * +-u64 wide------------------------------------+
+ * +                                             +
+ * +----------------------+
+ * | CurrentBufferPtr     + Pointer to current PCI buffer >-+
+ * +----------------------+                                 |
+ * | Unused               +                                 |
+ * +----------------------+                                 |
+ * | Pitch                + = 188 (bytes)                   |
+ * +----------------------+                                 |
+ * | PCI buffer size      + = pitch * number of lines (312) |
+ * +----------------------+                                 |
+ * |0| Buf0 Write Offset  +                                 |
+ * +----------------------+                                 v
+ * |1| Buf1 Write Offset  +                                 |
+ * +----------------------+                                 |
+ * |2| Buf2 Write Offset  +                                 |
+ * +----------------------+                                 |
+ * |3| Buf3 Write Offset  +                                 |
+ * +----------------------+                                 |
+ * ... More write offsets                                   |
+ * +---------------------------------------------+          |
+ * +0| set of ptrs to PCI pagetables             +          |
+ * +---------------------------------------------+          |
+ * +1| set of ptrs to PCI pagetables             + <--------+
+ * +---------------------------------------------+
+ * +2| set of ptrs to PCI pagetables             +
+ * +---------------------------------------------+
+ * +3| set of ptrs to PCI pagetables             + >--+
+ * +---------------------------------------------+    |
+ * ... More buffer pointers                           |  +----------------+
+ *						    +->| pt[0] TS data  |
+ *						    |  +----------------+
+ *						    |
+ *						    |  +----------------+
+ *						    +->| pt[1] TS data  |
+ *						    |  +----------------+
+ *						    | etc
  */
 
 void saa7164_buffer_display(struct saa7164_buffer *buf)
@@ -283,7 +283,8 @@ int saa7164_buffer_cfg_port(struct saa7164_port *port)
 	return 0;
 }
 
-struct saa7164_user_buffer *saa7164_buffer_alloc_user(struct saa7164_dev *dev, u32 len)
+struct saa7164_user_buffer *saa7164_buffer_alloc_user(struct saa7164_dev *dev,
+	u32 len)
 {
 	struct saa7164_user_buffer *buf;
 
@@ -313,12 +314,9 @@ void saa7164_buffer_dealloc_user(struct saa7164_user_buffer *buf)
 	if (!buf)
 		return;
 
-	if (buf->data) {
-		kfree(buf->data);
-		buf->data = 0;
-	}
+	kfree(buf->data);
+	buf->data = 0;
 
-	if (buf)
-		kfree(buf);
+	kfree(buf);
 }
 
diff --git a/drivers/media/video/saa7164/saa7164-bus.c b/drivers/media/video/saa7164/saa7164-bus.c
index 30d5283da41..b2b0d97101d 100644
--- a/drivers/media/video/saa7164/saa7164-bus.c
+++ b/drivers/media/video/saa7164/saa7164-bus.c
@@ -43,7 +43,8 @@ int saa7164_bus_setup(struct saa7164_dev *dev)
 
 	b->m_dwSizeGetRing	= SAA_DEVICE_BUFFERBLOCKSIZE;
 
-	b->m_dwSetWritePos	= ((u32)dev->intfdesc.BARLocation) + (2 * sizeof(u64));
+	b->m_dwSetWritePos	= ((u32)dev->intfdesc.BARLocation) +
+		(2 * sizeof(u64));
 	b->m_dwSetReadPos	= b->m_dwSetWritePos + (1 * sizeof(u32));
 
 	b->m_dwGetWritePos	= b->m_dwSetWritePos + (2 * sizeof(u32));
@@ -105,7 +106,8 @@ void saa7164_bus_verify(struct saa7164_dev *dev)
 	}
 }
 
-void saa7164_bus_dumpmsg(struct saa7164_dev *dev, struct tmComResInfo* m, void *buf)
+void saa7164_bus_dumpmsg(struct saa7164_dev *dev, struct tmComResInfo* m,
+	void *buf)
 {
 	dprintk(DBGLVL_BUS, "Dumping msg structure:\n");
 	dprintk(DBGLVL_BUS, " .id               = %d\n",   m->id);
@@ -129,7 +131,8 @@ void saa7164_bus_dumpmsg(struct saa7164_dev *dev, struct tmComResInfo* m, void *
  *  SAA_OK     The function executed successfully.
  *  < 0        One or more members are not initialized.
  */
-int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg, void *buf)
+int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg,
+	void *buf)
 {
 	struct tmComResBusInfo *bus = &dev->bus;
 	u32 bytes_to_write, free_write_space, timeout, curr_srp, curr_swp;
@@ -294,14 +297,15 @@ out:
 /*
  * Receive a command or a response from the bus. The implementation does not
  * know if it is a command or a response it simply dequeues the data,
- * depending on the bus information given in the struct tmComResBusInfo structure.
+ * depending on the bus information given in the struct tmComResBusInfo
+ * structure.
  *
  * Return Value:
  *  0          The function executed successfully.
  *  < 0        One or more members are not initialized.
  */
-int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg, void *buf,
-	int peekonly)
+int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg,
+	void *buf, int peekonly)
 {
 	struct tmComResBusInfo *bus = &dev->bus;
 	u32 bytes_to_read, write_distance, curr_grp, curr_gwp,
diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
index 4cb634e952a..69822a4e727 100644
--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -482,7 +482,7 @@ void saa7164_gpio_setup(struct saa7164_dev *dev)
 		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
 		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
 
-		msleep(10);
+		msleep(20);
 
 		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
 		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c
index 301a9e302f4..a97ae17b36c 100644
--- a/drivers/media/video/saa7164/saa7164-cmd.c
+++ b/drivers/media/video/saa7164/saa7164-cmd.c
@@ -122,8 +122,8 @@ int saa7164_irq_dequeue(struct saa7164_dev *dev)
 				return ret;
 		}
 
-		/* It's unlikely to have more than 4 or 5 pending messages, ensure we exit
-		 * at some point regardles.
+		/* It's unlikely to have more than 4 or 5 pending messages,
+		 * ensure we exit at some point regardless.
 		 */
 	} while (i++ < 32);
 
@@ -186,7 +186,8 @@ int saa7164_cmd_dequeue(struct saa7164_dev *dev)
 	return SAA_OK;
 }
 
-int saa7164_cmd_set(struct saa7164_dev *dev, struct tmComResInfo* msg, void *buf)
+int saa7164_cmd_set(struct saa7164_dev *dev, struct tmComResInfo *msg,
+	void *buf)
 {
 	struct tmComResBusInfo *bus = &dev->bus;
 	u8 cmd_sent;
@@ -292,7 +293,8 @@ int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
 			 * We typically are signalled in < 50ms but it can
 			 * take MUCH longer.
 			 */
-			wait_event_timeout(*q, dev->cmds[seqno].signalled, (HZ * waitsecs));
+			wait_event_timeout(*q, dev->cmds[seqno].signalled,
+				(HZ * waitsecs));
 			r = time_before(jiffies, stamp + (HZ * waitsecs));
 			if (r)
 				ret = SAA_OK;
diff --git a/drivers/media/video/saa7164/saa7164-core.c b/drivers/media/video/saa7164/saa7164-core.c
index e1bac505146..d6bf3f82cc3 100644
--- a/drivers/media/video/saa7164/saa7164-core.c
+++ b/drivers/media/video/saa7164/saa7164-core.c
@@ -40,12 +40,12 @@ MODULE_AUTHOR("Steven Toth <stoth@kernellabs.com>");
 MODULE_LICENSE("GPL");
 
 /*
-  1 Basic
-  2
-  4 i2c
-  8 api
- 16 cmd
- 32 bus
+ *  1 Basic
+ *  2
+ *  4 i2c
+ *  8 api
+ * 16 cmd
+ * 32 bus
  */
 
 unsigned int saa_debug;
@@ -82,7 +82,8 @@ MODULE_PARM_DESC(crc_checking, "enable crc sanity checking on buffers");
 
 unsigned int guard_checking = 1;
 module_param(guard_checking, int, 0644);
-MODULE_PARM_DESC(guard_checking, "enable dma sanity checking for buffer overruns");
+MODULE_PARM_DESC(guard_checking,
+	"enable dma sanity checking for buffer overruns");
 
 static unsigned int saa7164_devcount;
 
@@ -123,7 +124,9 @@ static void saa7164_pack_verifier(struct saa7164_buffer *buf)
 		if ((*(p + i + 0) != 0x00) || (*(p + i + 1) != 0x00) ||
 			(*(p + i + 2) != 0x01) || (*(p + i + 3) != 0xBA)) {
 			printk(KERN_ERR "No pack at 0x%x\n", i);
-//			saa7164_dumphex16FF(buf->port->dev, (p + i), 32);
+#if 0
+			saa7164_dumphex16FF(buf->port->dev, (p + i), 32);
+#endif
 		}
 	}
 }
@@ -199,19 +202,16 @@ static void saa7164_histogram_reset(struct saa7164_histogram *hg, char *name)
 	strcpy(hg->name, name);
 
 	/* First 30ms x 1ms */
-	for (i = 0; i < 30; i++) {
+	for (i = 0; i < 30; i++)
 		hg->counter1[0 + i].val = i;
-	}
 
 	/* 30 - 200ms x 10ms  */
-	for (i = 0; i < 18; i++) {
+	for (i = 0; i < 18; i++)
 		hg->counter1[30 + i].val = 30 + (i * 10);
-	}
 
 	/* 200 - 2000ms x 100ms  */
-	for (i = 0; i < 15; i++) {
+	for (i = 0; i < 15; i++)
 		hg->counter1[48 + i].val = 200 + (i * 200);
-	}
 
 	/* Catch all massive value (2secs) */
 	hg->counter1[55].val = 2000;
@@ -315,7 +315,9 @@ static void saa7164_work_enchandler_helper(struct saa7164_port *port, int bufnr)
 					(*(p + buf->actual_size + 0x13) != 0xff)) {
 						printk(KERN_ERR "%s() buf %p guard buffer breach\n",
 							__func__, buf);
-//						saa7164_dumphex16FF(dev, (p + buf->actual_size) - 32 , 64);
+#if 0
+						saa7164_dumphex16FF(dev, (p + buf->actual_size) - 32 , 64);
+#endif
 				}
 			}
 
@@ -961,9 +963,7 @@ static int saa7164_port_init(struct saa7164_dev *dev, int portnr)
 
 		/* We need a deferred interrupt handler for cmd handling */
 		INIT_WORK(&port->workenc, saa7164_work_enchandler);
-	}
-	else
-	if ((portnr == SAA7164_PORT_VBI1) || (portnr == SAA7164_PORT_VBI2)) {
+	} else if ((portnr == SAA7164_PORT_VBI1) || (portnr == SAA7164_PORT_VBI2)) {
 		port->type = SAA7164_MPEG_VBI;
 
 		/* We need a deferred interrupt handler for cmd handling */
@@ -1001,7 +1001,7 @@ static int saa7164_dev_setup(struct saa7164_dev *dev)
 	atomic_inc(&dev->refcount);
 	dev->nr = saa7164_devcount++;
 
-	sprintf(dev->name, "saa7164[%d]", dev->nr);
+	snprintf(dev->name, sizeof(dev->name), "saa7164[%d]", dev->nr);
 
 	mutex_lock(&devlist);
 	list_add_tail(&dev->devlist, &saa7164_devlist);
@@ -1169,7 +1169,7 @@ static int saa7164_proc_open(struct inode *inode, struct file *filp)
 	return single_open(filp, saa7164_proc_show, NULL);
 }
 
-static struct file_operations saa7164_proc_fops = {
+static const struct file_operations saa7164_proc_fops = {
 	.open		= saa7164_proc_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/drivers/media/video/saa7164/saa7164-encoder.c b/drivers/media/video/saa7164/saa7164-encoder.c
index cbb53d0ee97..1838408cd5c 100644
--- a/drivers/media/video/saa7164/saa7164-encoder.c
+++ b/drivers/media/video/saa7164/saa7164-encoder.c
@@ -125,16 +125,22 @@ static int saa7164_encoder_buffers_alloc(struct saa7164_port *port)
 
 	dprintk(DBGLVL_ENC, "%s()\n", __func__);
 
-	if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_PS) {
-		dprintk(DBGLVL_ENC, "%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_PS\n", __func__);
+	if (port->encoder_params.stream_type ==
+		V4L2_MPEG_STREAM_TYPE_MPEG2_PS) {
+		dprintk(DBGLVL_ENC,
+			"%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_PS\n",
+			__func__);
 		params->samplesperline = 128;
 		params->numberoflines = 256;
 		params->pitch = 128;
 		params->numpagetables = 2 +
 			((SAA7164_PS_NUMBER_OF_LINES * 128) / PAGE_SIZE);
 	} else
-	if (port->encoder_params.stream_type == V4L2_MPEG_STREAM_TYPE_MPEG2_TS) {
-		dprintk(DBGLVL_ENC, "%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_TS\n", __func__);
+	if (port->encoder_params.stream_type ==
+		V4L2_MPEG_STREAM_TYPE_MPEG2_TS) {
+		dprintk(DBGLVL_ENC,
+			"%s() type=V4L2_MPEG_STREAM_TYPE_MPEG2_TS\n",
+			__func__);
 		params->samplesperline = 188;
 		params->numberoflines = 312;
 		params->pitch = 188;
@@ -826,7 +832,8 @@ static int fill_queryctrl(struct saa7164_encoder_params *params,
 		return v4l2_ctrl_query_fill(c, 1, 255, 1, 15);
 	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
 		return v4l2_ctrl_query_fill(c,
-			V4L2_MPEG_VIDEO_BITRATE_MODE_VBR, V4L2_MPEG_VIDEO_BITRATE_MODE_CBR,
+			V4L2_MPEG_VIDEO_BITRATE_MODE_VBR,
+			V4L2_MPEG_VIDEO_BITRATE_MODE_CBR,
 			1, V4L2_MPEG_VIDEO_BITRATE_MODE_VBR);
 	case V4L2_CID_MPEG_VIDEO_B_FRAMES:
 		return v4l2_ctrl_query_fill(c,
@@ -1113,7 +1120,9 @@ struct saa7164_user_buffer *saa7164_enc_next_buf(struct saa7164_port *port)
 		if (crc_checking) {
 			crc = crc32(0, ubuf->data, ubuf->actual_size);
 			if (crc != ubuf->crc) {
-				printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n", __func__,
+				printk(KERN_ERR
+		"%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n",
+					__func__,
 					ubuf, ubuf->crc, crc);
 			}
 		}
@@ -1201,9 +1210,8 @@ static ssize_t fops_read(struct file *file, char __user *buffer,
 		buffer += cnt;
 		ret += cnt;
 
-		if (ubuf->pos > ubuf->actual_size) {
+		if (ubuf->pos > ubuf->actual_size)
 			printk(KERN_ERR "read() pos > actual, huh?\n");
-		}
 
 		if (ubuf->pos == ubuf->actual_size) {
 
@@ -1227,16 +1235,16 @@ static ssize_t fops_read(struct file *file, char __user *buffer,
 		}
 	}
 err:
-	if (!ret && !ubuf) {
+	if (!ret && !ubuf)
 		ret = -EAGAIN;
-	}
 
 	return ret;
 }
 
 static unsigned int fops_poll(struct file *file, poll_table *wait)
 {
-	struct saa7164_encoder_fh *fh = (struct saa7164_encoder_fh *)file->private_data;
+	struct saa7164_encoder_fh *fh =
+		(struct saa7164_encoder_fh *)file->private_data;
 	struct saa7164_port *port = fh->port;
 	struct saa7164_user_buffer *ubuf;
 	unsigned int mask = 0;
@@ -1249,9 +1257,8 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 	saa7164_histogram_update(&port->poll_interval,
 		port->last_poll_msecs_diff);
 
-	if (!video_is_registered(port->v4l_device)) {
+	if (!video_is_registered(port->v4l_device))
 		return -EIO;
-	}
 
 	if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) {
 		if (atomic_inc_return(&port->v4l_reader_count) == 1) {
diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c
index 484533c32bb..ebed6f786a2 100644
--- a/drivers/media/video/saa7164/saa7164-fw.c
+++ b/drivers/media/video/saa7164/saa7164-fw.c
@@ -178,7 +178,7 @@ int saa7164_downloadimage(struct saa7164_dev *dev, u8 *src, u32 srcsize,
 			goto out;
 		}
 
-		msleep(10);
+		msleep(10); /* Checkpatch throws a < 20ms warning */
 		if (timeout++ > 60)
 			break;
 	}
@@ -235,7 +235,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 		while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
 			dprintk(DBGLVL_FW, "%s() err_flags = %x\n",
 				__func__, err_flags);
-			msleep(10);
+			msleep(10); /* Checkpatch throws a < 20ms warning */
 
 			if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
 				printk(KERN_ERR "%s() firmware corrupt\n",
@@ -294,7 +294,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 			while (err_flags != SAA_DEVICE_IMAGE_BOOTING) {
 				dprintk(DBGLVL_FW, "%s() err_flags2 = %x\n",
 					__func__, err_flags);
-				msleep(10);
+				msleep(10); /* Checkpatch throws a < 20ms warning */
 
 				if (err_flags & SAA_DEVICE_IMAGE_CORRUPT) {
 					printk(KERN_ERR
@@ -365,7 +365,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 
 			first_timeout = SAA_DEVICE_TIMEOUT;
 			while (first_timeout) {
-				msleep(10);
+				msleep(10); /* Checkpatch throws a < 20ms warning */
 
 				version =
 					saa7164_getcurrentfirmwareversion(dev);
@@ -608,8 +608,6 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
 	ret = 0;
 
 out:
-	if (fw)
-		release_firmware(fw);
-
+	release_firmware(fw);
 	return ret;
 }
diff --git a/drivers/media/video/saa7164/saa7164-i2c.c b/drivers/media/video/saa7164/saa7164-i2c.c
index b5167d33650..26148f76cba 100644
--- a/drivers/media/video/saa7164/saa7164-i2c.c
+++ b/drivers/media/video/saa7164/saa7164-i2c.c
@@ -23,7 +23,7 @@
 #include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 #include "saa7164.h"
 
@@ -65,7 +65,7 @@ static int i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
 	}
 	return num;
 
- err:
+err:
 	return retval;
 }
 
diff --git a/drivers/media/video/saa7164/saa7164-vbi.c b/drivers/media/video/saa7164/saa7164-vbi.c
index 323c7cdca37..8abbe6d661e 100644
--- a/drivers/media/video/saa7164/saa7164-vbi.c
+++ b/drivers/media/video/saa7164/saa7164-vbi.c
@@ -51,11 +51,15 @@ static void saa7164_vbi_configure(struct saa7164_port *port)
 	/* Set up the DIF (enable it) for analog mode by default */
 	saa7164_api_initialize_dif(port);
 
-//	/* Configure the correct video standard */
-//	saa7164_api_configure_dif(port, port->encodernorm.id);
+	/* Configure the correct video standard */
+#if 0
+	saa7164_api_configure_dif(port, port->encodernorm.id);
+#endif
 
-//	/* Ensure the audio decoder is correct configured */
-//	saa7164_api_set_audio_std(port);
+#if 0
+	/* Ensure the audio decoder is correct configured */
+	saa7164_api_set_audio_std(port);
+#endif
 	dprintk(DBGLVL_VBI, "%s() ends\n", __func__);
 }
 
@@ -919,8 +923,10 @@ static int saa7164_vbi_start_streaming(struct saa7164_port *port)
 	saa7164_vbi_buffers_alloc(port);
 
 	/* Configure the encoder with any cache values */
-//	saa7164_api_set_encoder(port);
-//	saa7164_api_get_encoder(port);
+#if 0
+	saa7164_api_set_encoder(port);
+	saa7164_api_get_encoder(port);
+#endif
 
 	/* Place the empty buffers on the hardware */
 	saa7164_buffer_cfg_port(port);
@@ -1060,7 +1066,8 @@ struct saa7164_user_buffer *saa7164_vbi_next_buf(struct saa7164_port *port)
 		if (crc_checking) {
 			crc = crc32(0, ubuf->data, ubuf->actual_size);
 			if (crc != ubuf->crc) {
-				printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n", __func__,
+				printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n",
+					__func__,
 					ubuf, ubuf->crc, crc);
 			}
 		}
@@ -1148,9 +1155,8 @@ static ssize_t fops_read(struct file *file, char __user *buffer,
 		buffer += cnt;
 		ret += cnt;
 
-		if (ubuf->pos > ubuf->actual_size) {
+		if (ubuf->pos > ubuf->actual_size)
 			printk(KERN_ERR "read() pos > actual, huh?\n");
-		}
 
 		if (ubuf->pos == ubuf->actual_size) {
 
@@ -1197,9 +1203,8 @@ static unsigned int fops_poll(struct file *file, poll_table *wait)
 	saa7164_histogram_update(&port->poll_interval,
 		port->last_poll_msecs_diff);
 
-	if (!video_is_registered(port->v4l_device)) {
+	if (!video_is_registered(port->v4l_device))
 		return -EIO;
-	}
 
 	if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) {
 		if (atomic_inc_return(&port->v4l_reader_count) == 1) {
@@ -1257,10 +1262,14 @@ static const struct v4l2_ioctl_ops vbi_ioctl_ops = {
 	.vidioc_try_ext_ctrls	 = vidioc_try_ext_ctrls,
 	.vidioc_log_status	 = vidioc_log_status,
 	.vidioc_queryctrl	 = vidioc_queryctrl,
-//	.vidioc_g_chip_ident	 = saa7164_g_chip_ident,
+#if 0
+	.vidioc_g_chip_ident	 = saa7164_g_chip_ident,
+#endif
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-//	.vidioc_g_register	 = saa7164_g_register,
-//	.vidioc_s_register	 = saa7164_s_register,
+#if 0
+	.vidioc_g_register	 = saa7164_g_register,
+	.vidioc_s_register	 = saa7164_s_register,
+#endif
 #endif
 	.vidioc_g_fmt_vbi_cap	 = saa7164_vbi_fmt,
 	.vidioc_try_fmt_vbi_cap	 = saa7164_vbi_fmt,
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 1d9c5cbbbc5..16745d2fb34 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -58,7 +58,6 @@
 #include <media/tveeprom.h>
 #include <media/videobuf-dma-sg.h>
 #include <media/videobuf-dvb.h>
-#include <linux/smp_lock.h>
 #include <dvb_demux.h>
 #include <dvb_frontend.h>
 #include <dvb_net.h>
@@ -114,7 +113,8 @@
 #define DBGLVL_THR 4096
 #define DBGLVL_CPU 8192
 
-#define SAA7164_NORMS (V4L2_STD_NTSC_M |  V4L2_STD_NTSC_M_JP |  V4L2_STD_NTSC_443)
+#define SAA7164_NORMS \
+	(V4L2_STD_NTSC_M |  V4L2_STD_NTSC_M_JP |  V4L2_STD_NTSC_443)
 
 enum port_t {
 	SAA7164_MPEG_UNDEFINED = 0,
@@ -183,15 +183,11 @@ struct saa7164_subid {
 
 struct saa7164_encoder_fh {
 	struct saa7164_port *port;
-//	u32 freq;
-//	u32 tuner_type;
 	atomic_t v4l_reading;
 };
 
 struct saa7164_vbi_fh {
 	struct saa7164_port *port;
-//	u32 freq;
-//	u32 tuner_type;
 	atomic_t v4l_reading;
 };
 
@@ -266,8 +262,6 @@ struct saa7164_ctrl {
 struct saa7164_tvnorm {
 	char		*name;
 	v4l2_std_id	id;
-//	u32		cxiformat;
-//	u32		cxoformat;
 };
 
 struct saa7164_encoder_params {
@@ -448,7 +442,7 @@ struct saa7164_dev {
 	int	nr;
 	int	hwrevision;
 	u32	board;
-	char	name[32];
+	char	name[16];
 
 	/* firmware status */
 	struct saa7164_fw_status	fw_status;
@@ -511,7 +505,8 @@ extern void saa7164_call_i2c_clients(struct saa7164_i2c *bus,
 /* saa7164-bus.c                                               */
 int saa7164_bus_setup(struct saa7164_dev *dev);
 void saa7164_bus_dump(struct saa7164_dev *dev);
-int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg, void *buf);
+int saa7164_bus_set(struct saa7164_dev *dev, struct tmComResInfo* msg,
+	void *buf);
 int saa7164_bus_get(struct saa7164_dev *dev, struct tmComResInfo* msg,
 	void *buf, int peekonly);
 
@@ -553,7 +548,8 @@ int saa7164_api_get_videomux(struct saa7164_port *port);
 int saa7164_api_set_vbi_format(struct saa7164_port *port);
 int saa7164_api_set_debug(struct saa7164_dev *dev, u8 level);
 int saa7164_api_collect_debug(struct saa7164_dev *dev);
-int saa7164_api_get_load_info(struct saa7164_dev *dev, struct tmFwInfoStruct *i);
+int saa7164_api_get_load_info(struct saa7164_dev *dev,
+	struct tmFwInfoStruct *i);
 
 /* ----------------------------------------------------------- */
 /* saa7164-cards.c                                             */
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 5c209afb0ac..954222bc345 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -1786,7 +1786,7 @@ static void sh_mobile_ceu_init_videobuf(struct videobuf_queue *q,
 				       V4L2_BUF_TYPE_VIDEO_CAPTURE,
 				       pcdev->field,
 				       sizeof(struct sh_mobile_ceu_buffer),
-				       icd, NULL);
+				       icd, &icd->video_lock);
 }
 
 static int sh_mobile_ceu_get_ctrl(struct soc_camera_device *icd,
@@ -1980,7 +1980,7 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev)
 		 * we complete the completion.
 		 */
 
-		if (!csi2->driver || !csi2->driver->owner) {
+		if (!csi2->driver) {
 			complete(&wait.completion);
 			/* Either too late, or probing failed */
 			bus_unregister_notifier(&platform_bus_type, &wait.notifier);
diff --git a/drivers/media/video/sh_vou.c b/drivers/media/video/sh_vou.c
index 0f4906136b8..07cf0c6c7c1 100644
--- a/drivers/media/video/sh_vou.c
+++ b/drivers/media/video/sh_vou.c
@@ -75,6 +75,7 @@ struct sh_vou_device {
 	int pix_idx;
 	struct videobuf_buffer *active;
 	enum sh_vou_status status;
+	struct mutex fop_lock;
 };
 
 struct sh_vou_file {
@@ -235,7 +236,7 @@ static void free_buffer(struct videobuf_queue *vq, struct videobuf_buffer *vb)
 	vb->state = VIDEOBUF_NEEDS_INIT;
 }
 
-/* Locking: caller holds vq->vb_lock mutex */
+/* Locking: caller holds fop_lock mutex */
 static int sh_vou_buf_setup(struct videobuf_queue *vq, unsigned int *count,
 			    unsigned int *size)
 {
@@ -257,7 +258,7 @@ static int sh_vou_buf_setup(struct videobuf_queue *vq, unsigned int *count,
 	return 0;
 }
 
-/* Locking: caller holds vq->vb_lock mutex */
+/* Locking: caller holds fop_lock mutex */
 static int sh_vou_buf_prepare(struct videobuf_queue *vq,
 			      struct videobuf_buffer *vb,
 			      enum v4l2_field field)
@@ -306,7 +307,7 @@ static int sh_vou_buf_prepare(struct videobuf_queue *vq,
 	return 0;
 }
 
-/* Locking: caller holds vq->vb_lock mutex and vq->irqlock spinlock */
+/* Locking: caller holds fop_lock mutex and vq->irqlock spinlock */
 static void sh_vou_buf_queue(struct videobuf_queue *vq,
 			     struct videobuf_buffer *vb)
 {
@@ -1190,7 +1191,7 @@ static int sh_vou_open(struct file *file)
 				       V4L2_BUF_TYPE_VIDEO_OUTPUT,
 				       V4L2_FIELD_NONE,
 				       sizeof(struct videobuf_buffer), vdev,
-				       NULL);
+				       &vou_dev->fop_lock);
 
 	return 0;
 }
@@ -1292,7 +1293,7 @@ static const struct v4l2_file_operations sh_vou_fops = {
 	.owner		= THIS_MODULE,
 	.open		= sh_vou_open,
 	.release	= sh_vou_release,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.mmap		= sh_vou_mmap,
 	.poll		= sh_vou_poll,
 };
@@ -1331,6 +1332,7 @@ static int __devinit sh_vou_probe(struct platform_device *pdev)
 
 	INIT_LIST_HEAD(&vou_dev->queue);
 	spin_lock_init(&vou_dev->lock);
+	mutex_init(&vou_dev->fop_lock);
 	atomic_set(&vou_dev->use_count, 0);
 	vou_dev->pdata = vou_pdata;
 	vou_dev->status = SH_VOU_IDLE;
@@ -1388,6 +1390,7 @@ static int __devinit sh_vou_probe(struct platform_device *pdev)
 		vdev->tvnorms |= V4L2_STD_PAL;
 	vdev->v4l2_dev = &vou_dev->v4l2_dev;
 	vdev->release = video_device_release;
+	vdev->lock = &vou_dev->fop_lock;
 
 	vou_dev->vdev = vdev;
 	video_set_drvdata(vdev, vou_dev);
@@ -1406,7 +1409,7 @@ static int __devinit sh_vou_probe(struct platform_device *pdev)
 		goto ereset;
 
 	subdev = v4l2_i2c_new_subdev_board(&vou_dev->v4l2_dev, i2c_adap,
-			NULL, vou_pdata->board_info, NULL);
+			vou_pdata->board_info, NULL);
 	if (!subdev) {
 		ret = -ENOMEM;
 		goto ei2cnd;
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 28e19daadec..84984f64b23 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -2189,6 +2189,7 @@ sn9c102_vidioc_enuminput(struct sn9c102_device* cam, void __user * arg)
 	memset(&i, 0, sizeof(i));
 	strcpy(i.name, "Camera");
 	i.type = V4L2_INPUT_TYPE_CAMERA;
+	i.capabilities = V4L2_IN_CAP_STD;
 
 	if (copy_to_user(arg, &i, sizeof(i)))
 		return -EFAULT;
@@ -3238,7 +3239,7 @@ static const struct v4l2_file_operations sn9c102_fops = {
 	.owner = THIS_MODULE,
 	.open = sn9c102_open,
 	.release = sn9c102_release,
-	.ioctl = sn9c102_ioctl,
+	.unlocked_ioctl = sn9c102_ioctl,
 	.read = sn9c102_read,
 	.poll = sn9c102_poll,
 	.mmap = sn9c102_mmap,
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index ccfa59c5455..41064c7b5ef 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -43,9 +43,7 @@ static const struct usb_device_id sn9c102_id_table[] = {
 #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6001, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), },
-#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), },
-#if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), },
 /*	{ SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */
@@ -56,8 +54,8 @@ static const struct usb_device_id sn9c102_id_table[] = {
 #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6028, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6029, BRIDGE_SN9C102), },
-#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), },
 #if !defined CONFIG_USB_GSPCA_SONIXB && !defined CONFIG_USB_GSPCA_SONIXB_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c
index 43848a751d1..a66811b4371 100644
--- a/drivers/media/video/soc_camera.c
+++ b/drivers/media/video/soc_camera.c
@@ -24,6 +24,7 @@
 #include <linux/mutex.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
 #include <linux/vmalloc.h>
@@ -43,6 +44,51 @@ static LIST_HEAD(hosts);
 static LIST_HEAD(devices);
 static DEFINE_MUTEX(list_lock);		/* Protects the list of hosts */
 
+static int soc_camera_power_set(struct soc_camera_device *icd,
+				struct soc_camera_link *icl,
+				int power_on)
+{
+	int ret;
+
+	if (power_on) {
+		ret = regulator_bulk_enable(icl->num_regulators,
+					    icl->regulators);
+		if (ret < 0) {
+			dev_err(&icd->dev, "Cannot enable regulators\n");
+			return ret;
+		}
+
+		if (icl->power)
+			ret = icl->power(icd->pdev, power_on);
+		if (ret < 0) {
+			dev_err(&icd->dev,
+				"Platform failed to power-on the camera.\n");
+
+			regulator_bulk_disable(icl->num_regulators,
+					       icl->regulators);
+			return ret;
+		}
+	} else {
+		ret = 0;
+		if (icl->power)
+			ret = icl->power(icd->pdev, 0);
+		if (ret < 0) {
+			dev_err(&icd->dev,
+				"Platform failed to power-off the camera.\n");
+			return ret;
+		}
+
+		ret = regulator_bulk_disable(icl->num_regulators,
+					     icl->regulators);
+		if (ret < 0) {
+			dev_err(&icd->dev, "Cannot disable regulators\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 const struct soc_camera_format_xlate *soc_camera_xlate_by_fourcc(
 	struct soc_camera_device *icd, unsigned int fourcc)
 {
@@ -352,12 +398,6 @@ static int soc_camera_open(struct file *file)
 		return -EINVAL;
 	}
 
-	/*
-	 * Protect against icd->ops->remove() until we module_get() both
-	 * drivers.
-	 */
-	mutex_lock(&icd->video_lock);
-
 	icd->use_count++;
 
 	/* Now we really have to activate the camera */
@@ -375,11 +415,9 @@ static int soc_camera_open(struct file *file)
 			},
 		};
 
-		if (icl->power) {
-			ret = icl->power(icd->pdev, 1);
-			if (ret < 0)
-				goto epower;
-		}
+		ret = soc_camera_power_set(icd, icl, 1);
+		if (ret < 0)
+			goto epower;
 
 		/* The camera could have been already on, try to reset */
 		if (icl->reset)
@@ -405,15 +443,13 @@ static int soc_camera_open(struct file *file)
 		ret = soc_camera_set_fmt(icd, &f);
 		if (ret < 0)
 			goto esfmt;
+
+		ici->ops->init_videobuf(&icd->vb_vidq, icd);
 	}
 
 	file->private_data = icd;
 	dev_dbg(&icd->dev, "camera device open\n");
 
-	ici->ops->init_videobuf(&icd->vb_vidq, icd);
-
-	mutex_unlock(&icd->video_lock);
-
 	return 0;
 
 	/*
@@ -425,11 +461,9 @@ esfmt:
 eresume:
 	ici->ops->remove(icd);
 eiciadd:
-	if (icl->power)
-		icl->power(icd->pdev, 0);
+	soc_camera_power_set(icd, icl, 0);
 epower:
 	icd->use_count--;
-	mutex_unlock(&icd->video_lock);
 	module_put(ici->ops->owner);
 
 	return ret;
@@ -440,7 +474,6 @@ static int soc_camera_close(struct file *file)
 	struct soc_camera_device *icd = file->private_data;
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 
-	mutex_lock(&icd->video_lock);
 	icd->use_count--;
 	if (!icd->use_count) {
 		struct soc_camera_link *icl = to_soc_camera_link(icd);
@@ -450,15 +483,12 @@ static int soc_camera_close(struct file *file)
 
 		ici->ops->remove(icd);
 
-		if (icl->power)
-			icl->power(icd->pdev, 0);
+		soc_camera_power_set(icd, icl, 0);
 	}
 
 	if (icd->streamer == file)
 		icd->streamer = NULL;
 
-	mutex_unlock(&icd->video_lock);
-
 	module_put(ici->ops->owner);
 
 	dev_dbg(&icd->dev, "camera device close\n");
@@ -517,7 +547,7 @@ static struct v4l2_file_operations soc_camera_fops = {
 	.owner		= THIS_MODULE,
 	.open		= soc_camera_open,
 	.release	= soc_camera_close,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.read		= soc_camera_read,
 	.mmap		= soc_camera_mmap,
 	.poll		= soc_camera_poll,
@@ -534,12 +564,9 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
 	if (icd->streamer && icd->streamer != file)
 		return -EBUSY;
 
-	mutex_lock(&icd->vb_vidq.vb_lock);
-
 	if (icd->vb_vidq.bufs[0]) {
 		dev_err(&icd->dev, "S_FMT denied: queue initialised\n");
-		ret = -EBUSY;
-		goto unlock;
+		return -EBUSY;
 	}
 
 	ret = soc_camera_set_fmt(icd, f);
@@ -547,9 +574,6 @@ static int soc_camera_s_fmt_vid_cap(struct file *file, void *priv,
 	if (!ret && !icd->streamer)
 		icd->streamer = file;
 
-unlock:
-	mutex_unlock(&icd->vb_vidq.vb_lock);
-
 	return ret;
 }
 
@@ -622,15 +646,11 @@ static int soc_camera_streamon(struct file *file, void *priv,
 	if (icd->streamer != file)
 		return -EBUSY;
 
-	mutex_lock(&icd->video_lock);
-
 	v4l2_subdev_call(sd, video, s_stream, 1);
 
 	/* This calls buf_queue from host driver's videobuf_queue_ops */
 	ret = videobuf_streamon(&icd->vb_vidq);
 
-	mutex_unlock(&icd->video_lock);
-
 	return ret;
 }
 
@@ -648,8 +668,6 @@ static int soc_camera_streamoff(struct file *file, void *priv,
 	if (icd->streamer != file)
 		return -EBUSY;
 
-	mutex_lock(&icd->video_lock);
-
 	/*
 	 * This calls buf_release from host driver's videobuf_queue_ops for all
 	 * remaining buffers. When the last buffer is freed, stop capture
@@ -658,8 +676,6 @@ static int soc_camera_streamoff(struct file *file, void *priv,
 
 	v4l2_subdev_call(sd, video, s_stream, 0);
 
-	mutex_unlock(&icd->video_lock);
-
 	return 0;
 }
 
@@ -748,9 +764,7 @@ static int soc_camera_g_crop(struct file *file, void *fh,
 	struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
 	int ret;
 
-	mutex_lock(&icd->vb_vidq.vb_lock);
 	ret = ici->ops->get_crop(icd, a);
-	mutex_unlock(&icd->vb_vidq.vb_lock);
 
 	return ret;
 }
@@ -775,9 +789,6 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 	dev_dbg(&icd->dev, "S_CROP(%ux%u@%u:%u)\n",
 		rect->width, rect->height, rect->left, rect->top);
 
-	/* Cropping is allowed during a running capture, guard consistency */
-	mutex_lock(&icd->vb_vidq.vb_lock);
-
 	/* If get_crop fails, we'll let host and / or client drivers decide */
 	ret = ici->ops->get_crop(icd, &current_crop);
 
@@ -795,8 +806,6 @@ static int soc_camera_s_crop(struct file *file, void *fh,
 		ret = ici->ops->set_crop(icd, a);
 	}
 
-	mutex_unlock(&icd->vb_vidq.vb_lock);
-
 	return ret;
 }
 
@@ -896,7 +905,7 @@ static int soc_camera_init_i2c(struct soc_camera_device *icd,
 	icl->board_info->platform_data = icd;
 
 	subdev = v4l2_i2c_new_subdev_board(&ici->v4l2_dev, adap,
-				NULL, icl->board_info, NULL);
+				icl->board_info, NULL);
 	if (!subdev)
 		goto ei2cnd;
 
@@ -941,14 +950,14 @@ static int soc_camera_probe(struct device *dev)
 
 	dev_info(dev, "Probing %s\n", dev_name(dev));
 
-	if (icl->power) {
-		ret = icl->power(icd->pdev, 1);
-		if (ret < 0) {
-			dev_err(dev,
-				"Platform failed to power-on the camera.\n");
-			goto epower;
-		}
-	}
+	ret = regulator_bulk_get(icd->pdev, icl->num_regulators,
+				 icl->regulators);
+	if (ret < 0)
+		goto ereg;
+
+	ret = soc_camera_power_set(icd, icl, 1);
+	if (ret < 0)
+		goto epower;
 
 	/* The camera could have been already on, try to reset */
 	if (icl->reset)
@@ -998,7 +1007,13 @@ static int soc_camera_probe(struct device *dev)
 
 	icd->field = V4L2_FIELD_ANY;
 
-	/* ..._video_start() will create a device node, so we have to protect */
+	icd->vdev->lock = &icd->video_lock;
+
+	/*
+	 * ..._video_start() will create a device node, video_register_device()
+	 * itself is protected against concurrent open() calls, but we also have
+	 * to protect our data.
+	 */
 	mutex_lock(&icd->video_lock);
 
 	ret = soc_camera_video_start(icd);
@@ -1021,8 +1036,7 @@ static int soc_camera_probe(struct device *dev)
 
 	ici->ops->remove(icd);
 
-	if (icl->power)
-		icl->power(icd->pdev, 0);
+	soc_camera_power_set(icd, icl, 0);
 
 	mutex_unlock(&icd->video_lock);
 
@@ -1044,9 +1058,10 @@ eadddev:
 evdc:
 	ici->ops->remove(icd);
 eadd:
-	if (icl->power)
-		icl->power(icd->pdev, 0);
+	soc_camera_power_set(icd, icl, 0);
 epower:
+	regulator_bulk_free(icl->num_regulators, icl->regulators);
+ereg:
 	return ret;
 }
 
@@ -1063,10 +1078,8 @@ static int soc_camera_remove(struct device *dev)
 	BUG_ON(!dev->parent);
 
 	if (vdev) {
-		mutex_lock(&icd->video_lock);
 		video_unregister_device(vdev);
 		icd->vdev = NULL;
-		mutex_unlock(&icd->video_lock);
 	}
 
 	if (icl->board_info) {
@@ -1081,6 +1094,8 @@ static int soc_camera_remove(struct device *dev)
 	}
 	soc_camera_free_user_formats(icd);
 
+	regulator_bulk_free(icl->num_regulators, icl->regulators);
+
 	return 0;
 }
 
diff --git a/drivers/media/video/sr030pc30.c b/drivers/media/video/sr030pc30.c
index c9dc67aba98..864696b7a00 100644
--- a/drivers/media/video/sr030pc30.c
+++ b/drivers/media/video/sr030pc30.c
@@ -735,7 +735,7 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
 	const struct sr030pc30_platform_data *pdata = info->pdata;
 	int ret;
 
-	if (WARN(pdata == NULL, "No platform data!"))
+	if (WARN(pdata == NULL, "No platform data!\n"))
 		return -ENOMEM;
 
 	/*
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index f07a0f6b71c..d1a2cefbf55 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 
 #include <linux/usb.h>
 #include <linux/mm.h>
@@ -231,120 +230,6 @@ static int stk_initialise(struct stk_camera *dev)
 		return -1;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-
-/* sysfs functions */
-/*FIXME cleanup this */
-
-static ssize_t show_brightness(struct device *class,
-			struct device_attribute *attr, char *buf)
-{
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	return sprintf(buf, "%X\n", dev->vsettings.brightness);
-}
-
-static ssize_t store_brightness(struct device *class,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	char *endp;
-	unsigned long value;
-	int ret;
-
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	value = simple_strtoul(buf, &endp, 16);
-
-	dev->vsettings.brightness = (int) value;
-
-	ret = stk_sensor_set_brightness(dev, value >> 8);
-	if (ret)
-		return ret;
-	else
-		return count;
-}
-
-static ssize_t show_hflip(struct device *class,
-		struct device_attribute *attr, char *buf)
-{
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	return sprintf(buf, "%d\n", dev->vsettings.hflip);
-}
-
-static ssize_t store_hflip(struct device *class,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	if (strncmp(buf, "1", 1) == 0)
-		dev->vsettings.hflip = 1;
-	else if (strncmp(buf, "0", 1) == 0)
-		dev->vsettings.hflip = 0;
-	else
-		return -EINVAL;
-
-	return strlen(buf);
-}
-
-static ssize_t show_vflip(struct device *class,
-		struct device_attribute *attr, char *buf)
-{
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	return sprintf(buf, "%d\n", dev->vsettings.vflip);
-}
-
-static ssize_t store_vflip(struct device *class,
-		struct device_attribute *attr, const char *buf, size_t count)
-{
-	struct video_device *vdev = to_video_device(class);
-	struct stk_camera *dev = vdev_to_camera(vdev);
-
-	if (strncmp(buf, "1", 1) == 0)
-		dev->vsettings.vflip = 1;
-	else if (strncmp(buf, "0", 1) == 0)
-		dev->vsettings.vflip = 0;
-	else
-		return -EINVAL;
-
-	return strlen(buf);
-}
-
-static DEVICE_ATTR(brightness, S_IRUGO | S_IWUGO,
-			show_brightness, store_brightness);
-static DEVICE_ATTR(hflip, S_IRUGO | S_IWUGO, show_hflip, store_hflip);
-static DEVICE_ATTR(vflip, S_IRUGO | S_IWUGO, show_vflip, store_vflip);
-
-static int stk_create_sysfs_files(struct video_device *vdev)
-{
-	int ret;
-
-	ret = device_create_file(&vdev->dev, &dev_attr_brightness);
-	ret += device_create_file(&vdev->dev, &dev_attr_hflip);
-	ret += device_create_file(&vdev->dev, &dev_attr_vflip);
-	if (ret)
-		STK_WARNING("Could not create sysfs files\n");
-	return ret;
-}
-
-static void stk_remove_sysfs_files(struct video_device *vdev)
-{
-	device_remove_file(&vdev->dev, &dev_attr_brightness);
-	device_remove_file(&vdev->dev, &dev_attr_hflip);
-	device_remove_file(&vdev->dev, &dev_attr_vflip);
-}
-
-#else
-#define stk_create_sysfs_files(a)
-#define stk_remove_sysfs_files(a)
-#endif
-
 /* *********************************************** */
 /*
  * This function is called as an URB transfert is complete (Isochronous pipe).
@@ -673,14 +558,11 @@ static int v4l_stk_open(struct file *fp)
 	vdev = video_devdata(fp);
 	dev = vdev_to_camera(vdev);
 
-	lock_kernel();
 	if (dev == NULL || !is_present(dev)) {
-		unlock_kernel();
 		return -ENXIO;
 	}
 	fp->private_data = dev;
 	usb_autopm_get_interface(dev->interface);
-	unlock_kernel();
 
 	return 0;
 }
@@ -882,7 +764,24 @@ static struct v4l2_queryctrl stk_controls[] = {
 		.step    = 0x0100,
 		.default_value = 0x6000,
 	},
-	/*TODO: get more controls to work */
+	{
+		.id      = V4L2_CID_HFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Horizontal Flip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+		.default_value = 1,
+	},
+	{
+		.id      = V4L2_CID_VFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Vertical Flip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+		.default_value = 1,
+	},
 };
 
 static int stk_vidioc_queryctrl(struct file *filp,
@@ -910,6 +809,12 @@ static int stk_vidioc_g_ctrl(struct file *filp,
 	case V4L2_CID_BRIGHTNESS:
 		c->value = dev->vsettings.brightness;
 		break;
+	case V4L2_CID_HFLIP:
+		c->value = dev->vsettings.hflip;
+		break;
+	case V4L2_CID_VFLIP:
+		c->value = dev->vsettings.vflip;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -924,6 +829,12 @@ static int stk_vidioc_s_ctrl(struct file *filp,
 	case V4L2_CID_BRIGHTNESS:
 		dev->vsettings.brightness = c->value;
 		return stk_sensor_set_brightness(dev, c->value >> 8);
+	case V4L2_CID_HFLIP:
+		dev->vsettings.hflip = c->value;
+		return 0;
+	case V4L2_CID_VFLIP:
+		dev->vsettings.vflip = c->value;
+		return 0;
 	default:
 		return -EINVAL;
 	}
@@ -1398,8 +1309,6 @@ static int stk_camera_probe(struct usb_interface *interface,
 		goto error;
 	}
 
-	stk_create_sysfs_files(&dev->vdev);
-
 	return 0;
 
 error:
@@ -1415,7 +1324,6 @@ static void stk_camera_disconnect(struct usb_interface *interface)
 	unset_present(dev);
 
 	wake_up_interruptible(&dev->wait_frame);
-	stk_remove_sysfs_files(&dev->vdev);
 
 	STK_INFO("Syntek USB2.0 Camera release resources device %s\n",
 		 video_device_node_name(&dev->vdev));
diff --git a/drivers/media/video/tea6415c.c b/drivers/media/video/tea6415c.c
index 3e99cea8e4d..19621ed523e 100644
--- a/drivers/media/video/tea6415c.c
+++ b/drivers/media/video/tea6415c.c
@@ -148,7 +148,7 @@ static int tea6415c_probe(struct i2c_client *client,
 
 	/* let's see whether this adapter can support what we need */
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE))
-		return 0;
+		return -EIO;
 
 	v4l_info(client, "chip found @ 0x%x (%s)\n",
 			client->addr << 1, client->adapter->name);
diff --git a/drivers/media/video/timblogiw.c b/drivers/media/video/timblogiw.c
new file mode 100644
index 00000000000..fc611ebeb82
--- /dev/null
+++ b/drivers/media/video/timblogiw.c
@@ -0,0 +1,893 @@
+/*
+ * timblogiw.c timberdale FPGA LogiWin Video In driver
+ * Copyright (c) 2009-2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/* Supports:
+ * Timberdale FPGA LogiWin Video In
+ */
+
+#include <linux/version.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/i2c.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf-dma-contig.h>
+#include <media/timb_video.h>
+
+#define DRIVER_NAME			"timb-video"
+
+#define TIMBLOGIWIN_NAME		"Timberdale Video-In"
+#define TIMBLOGIW_VERSION_CODE		0x04
+
+#define TIMBLOGIW_LINES_PER_DESC	44
+#define TIMBLOGIW_MAX_VIDEO_MEM		16
+
+#define TIMBLOGIW_HAS_DECODER(lw)	(lw->pdata.encoder.module_name)
+
+
+struct timblogiw {
+	struct video_device		video_dev;
+	struct v4l2_device		v4l2_dev; /* mutual exclusion */
+	struct mutex			lock;
+	struct device			*dev;
+	struct timb_video_platform_data pdata;
+	struct v4l2_subdev		*sd_enc;	/* encoder */
+	bool				opened;
+};
+
+struct timblogiw_tvnorm {
+	v4l2_std_id std;
+	u16     width;
+	u16     height;
+	u8	fps;
+};
+
+struct timblogiw_fh {
+	struct videobuf_queue		vb_vidq;
+	struct timblogiw_tvnorm const	*cur_norm;
+	struct list_head		capture;
+	struct dma_chan			*chan;
+	spinlock_t			queue_lock; /* mutual exclusion */
+	unsigned int			frame_count;
+};
+
+struct timblogiw_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct videobuf_buffer	vb;
+	struct scatterlist	sg[16];
+	dma_cookie_t		cookie;
+	struct timblogiw_fh	*fh;
+};
+
+const struct timblogiw_tvnorm timblogiw_tvnorms[] = {
+	{
+		.std			= V4L2_STD_PAL,
+		.width			= 720,
+		.height			= 576,
+		.fps			= 25
+	},
+	{
+		.std			= V4L2_STD_NTSC,
+		.width			= 720,
+		.height			= 480,
+		.fps			= 30
+	}
+};
+
+static int timblogiw_bytes_per_line(const struct timblogiw_tvnorm *norm)
+{
+	return norm->width * 2;
+}
+
+
+static int timblogiw_frame_size(const struct timblogiw_tvnorm *norm)
+{
+	return norm->height * timblogiw_bytes_per_line(norm);
+}
+
+static const struct timblogiw_tvnorm *timblogiw_get_norm(const v4l2_std_id std)
+{
+	int i;
+	for (i = 0; i < ARRAY_SIZE(timblogiw_tvnorms); i++)
+		if (timblogiw_tvnorms[i].std & std)
+			return timblogiw_tvnorms + i;
+
+	/* default to first element */
+	return timblogiw_tvnorms;
+}
+
+static void timblogiw_dma_cb(void *data)
+{
+	struct timblogiw_buffer *buf = data;
+	struct timblogiw_fh *fh = buf->fh;
+	struct videobuf_buffer *vb = &buf->vb;
+
+	spin_lock(&fh->queue_lock);
+
+	/* mark the transfer done */
+	buf->cookie = -1;
+
+	fh->frame_count++;
+
+	if (vb->state != VIDEOBUF_ERROR) {
+		list_del(&vb->queue);
+		do_gettimeofday(&vb->ts);
+		vb->field_count = fh->frame_count * 2;
+		vb->state = VIDEOBUF_DONE;
+
+		wake_up(&vb->done);
+	}
+
+	if (!list_empty(&fh->capture)) {
+		vb = list_entry(fh->capture.next, struct videobuf_buffer,
+			queue);
+		vb->state = VIDEOBUF_ACTIVE;
+	}
+
+	spin_unlock(&fh->queue_lock);
+}
+
+static bool timblogiw_dma_filter_fn(struct dma_chan *chan, void *filter_param)
+{
+	return chan->chan_id == (uintptr_t)filter_param;
+}
+
+/* IOCTL functions */
+
+static int timblogiw_g_fmt(struct file *file, void  *priv,
+	struct v4l2_format *format)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s entry\n", __func__);
+
+	if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	mutex_lock(&lw->lock);
+
+	format->fmt.pix.width = fh->cur_norm->width;
+	format->fmt.pix.height = fh->cur_norm->height;
+	format->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
+	format->fmt.pix.bytesperline = timblogiw_bytes_per_line(fh->cur_norm);
+	format->fmt.pix.sizeimage = timblogiw_frame_size(fh->cur_norm);
+	format->fmt.pix.field = V4L2_FIELD_NONE;
+
+	mutex_unlock(&lw->lock);
+
+	return 0;
+}
+
+static int timblogiw_try_fmt(struct file *file, void  *priv,
+	struct v4l2_format *format)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct v4l2_pix_format *pix = &format->fmt.pix;
+
+	dev_dbg(&vdev->dev,
+		"%s - width=%d, height=%d, pixelformat=%d, field=%d\n"
+		"bytes per line %d, size image: %d, colorspace: %d\n",
+		__func__,
+		pix->width, pix->height, pix->pixelformat, pix->field,
+		pix->bytesperline, pix->sizeimage, pix->colorspace);
+
+	if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	if (pix->field != V4L2_FIELD_NONE)
+		return -EINVAL;
+
+	if (pix->pixelformat != V4L2_PIX_FMT_UYVY)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int timblogiw_s_fmt(struct file *file, void  *priv,
+	struct v4l2_format *format)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh = priv;
+	struct v4l2_pix_format *pix = &format->fmt.pix;
+	int err;
+
+	mutex_lock(&lw->lock);
+
+	err = timblogiw_try_fmt(file, priv, format);
+	if (err)
+		goto out;
+
+	if (videobuf_queue_is_busy(&fh->vb_vidq)) {
+		dev_err(&vdev->dev, "%s queue busy\n", __func__);
+		err = -EBUSY;
+		goto out;
+	}
+
+	pix->width = fh->cur_norm->width;
+	pix->height = fh->cur_norm->height;
+
+out:
+	mutex_unlock(&lw->lock);
+	return err;
+}
+
+static int timblogiw_querycap(struct file *file, void  *priv,
+	struct v4l2_capability *cap)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
+	memset(cap, 0, sizeof(*cap));
+	strncpy(cap->card, TIMBLOGIWIN_NAME, sizeof(cap->card)-1);
+	strncpy(cap->driver, DRIVER_NAME, sizeof(cap->driver) - 1);
+	strlcpy(cap->bus_info, vdev->name, sizeof(cap->bus_info));
+	cap->version = TIMBLOGIW_VERSION_CODE;
+	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+		V4L2_CAP_READWRITE;
+
+	return 0;
+}
+
+static int timblogiw_enum_fmt(struct file *file, void  *priv,
+	struct v4l2_fmtdesc *fmt)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	dev_dbg(&vdev->dev, "%s, index: %d\n",  __func__, fmt->index);
+
+	if (fmt->index != 0)
+		return -EINVAL;
+	memset(fmt, 0, sizeof(*fmt));
+	fmt->index = 0;
+	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	strncpy(fmt->description, "4:2:2, packed, YUYV",
+		sizeof(fmt->description)-1);
+	fmt->pixelformat = V4L2_PIX_FMT_UYVY;
+
+	return 0;
+}
+
+static int timblogiw_g_parm(struct file *file, void *priv,
+	struct v4l2_streamparm *sp)
+{
+	struct timblogiw_fh *fh = priv;
+	struct v4l2_captureparm *cp = &sp->parm.capture;
+
+	cp->capability = V4L2_CAP_TIMEPERFRAME;
+	cp->timeperframe.numerator = 1;
+	cp->timeperframe.denominator = fh->cur_norm->fps;
+
+	return 0;
+}
+
+static int timblogiw_reqbufs(struct file *file, void  *priv,
+	struct v4l2_requestbuffers *rb)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_reqbufs(&fh->vb_vidq, rb);
+}
+
+static int timblogiw_querybuf(struct file *file, void  *priv,
+	struct v4l2_buffer *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_querybuf(&fh->vb_vidq, b);
+}
+
+static int timblogiw_qbuf(struct file *file, void  *priv, struct v4l2_buffer *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_qbuf(&fh->vb_vidq, b);
+}
+
+static int timblogiw_dqbuf(struct file *file, void  *priv,
+	struct v4l2_buffer *b)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_dqbuf(&fh->vb_vidq, b, file->f_flags & O_NONBLOCK);
+}
+
+static int timblogiw_g_std(struct file *file, void  *priv, v4l2_std_id *std)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	*std = fh->cur_norm->std;
+	return 0;
+}
+
+static int timblogiw_s_std(struct file *file, void  *priv, v4l2_std_id *std)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh = priv;
+	int err = 0;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	mutex_lock(&lw->lock);
+
+	if (TIMBLOGIW_HAS_DECODER(lw))
+		err = v4l2_subdev_call(lw->sd_enc, core, s_std, *std);
+
+	if (!err)
+		fh->cur_norm = timblogiw_get_norm(*std);
+
+	mutex_unlock(&lw->lock);
+
+	return err;
+}
+
+static int timblogiw_enuminput(struct file *file, void  *priv,
+	struct v4l2_input *inp)
+{
+	struct video_device *vdev = video_devdata(file);
+	int i;
+
+	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
+
+	if (inp->index != 0)
+		return -EINVAL;
+
+	inp->index = 0;
+
+	strncpy(inp->name, "Timb input 1", sizeof(inp->name) - 1);
+	inp->type = V4L2_INPUT_TYPE_CAMERA;
+
+	inp->std = 0;
+	for (i = 0; i < ARRAY_SIZE(timblogiw_tvnorms); i++)
+		inp->std |= timblogiw_tvnorms[i].std;
+
+	return 0;
+}
+
+static int timblogiw_g_input(struct file *file, void  *priv,
+	unsigned int *input)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
+
+	*input = 0;
+
+	return 0;
+}
+
+static int timblogiw_s_input(struct file *file, void  *priv, unsigned int input)
+{
+	struct video_device *vdev = video_devdata(file);
+
+	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
+
+	if (input != 0)
+		return -EINVAL;
+	return 0;
+}
+
+static int timblogiw_streamon(struct file *file, void  *priv, unsigned int type)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE) {
+		dev_dbg(&vdev->dev, "%s - No capture device\n", __func__);
+		return -EINVAL;
+	}
+
+	fh->frame_count = 0;
+	return videobuf_streamon(&fh->vb_vidq);
+}
+
+static int timblogiw_streamoff(struct file *file, void  *priv,
+	unsigned int type)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s entry\n",  __func__);
+
+	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+		return -EINVAL;
+
+	return videobuf_streamoff(&fh->vb_vidq);
+}
+
+static int timblogiw_querystd(struct file *file, void  *priv, v4l2_std_id *std)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s entry\n",  __func__);
+
+	if (TIMBLOGIW_HAS_DECODER(lw))
+		return v4l2_subdev_call(lw->sd_enc, video, querystd, std);
+	else {
+		*std = fh->cur_norm->std;
+		return 0;
+	}
+}
+
+static int timblogiw_enum_framesizes(struct file *file, void  *priv,
+	struct v4l2_frmsizeenum *fsize)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = priv;
+
+	dev_dbg(&vdev->dev, "%s - index: %d, format: %d\n",  __func__,
+		fsize->index, fsize->pixel_format);
+
+	if ((fsize->index != 0) ||
+		(fsize->pixel_format != V4L2_PIX_FMT_UYVY))
+		return -EINVAL;
+
+	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+	fsize->discrete.width = fh->cur_norm->width;
+	fsize->discrete.height = fh->cur_norm->height;
+
+	return 0;
+}
+
+/* Video buffer functions */
+
+static int buffer_setup(struct videobuf_queue *vq, unsigned int *count,
+	unsigned int *size)
+{
+	struct timblogiw_fh *fh = vq->priv_data;
+
+	*size = timblogiw_frame_size(fh->cur_norm);
+
+	if (!*count)
+		*count = 32;
+
+	while (*size * *count > TIMBLOGIW_MAX_VIDEO_MEM * 1024 * 1024)
+		(*count)--;
+
+	return 0;
+}
+
+static int buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb,
+	enum v4l2_field field)
+{
+	struct timblogiw_fh *fh = vq->priv_data;
+	struct timblogiw_buffer *buf = container_of(vb, struct timblogiw_buffer,
+		vb);
+	unsigned int data_size = timblogiw_frame_size(fh->cur_norm);
+	int err = 0;
+
+	if (vb->baddr && vb->bsize < data_size)
+		/* User provided buffer, but it is too small */
+		return -ENOMEM;
+
+	vb->size = data_size;
+	vb->width = fh->cur_norm->width;
+	vb->height = fh->cur_norm->height;
+	vb->field = field;
+
+	if (vb->state == VIDEOBUF_NEEDS_INIT) {
+		int i;
+		unsigned int size;
+		unsigned int bytes_per_desc = TIMBLOGIW_LINES_PER_DESC *
+			timblogiw_bytes_per_line(fh->cur_norm);
+		dma_addr_t addr;
+
+		sg_init_table(buf->sg, ARRAY_SIZE(buf->sg));
+
+		err = videobuf_iolock(vq, vb, NULL);
+		if (err)
+			goto err;
+
+		addr = videobuf_to_dma_contig(vb);
+		for (i = 0, size = 0; size < data_size; i++) {
+			sg_dma_address(buf->sg + i) = addr + size;
+			size += bytes_per_desc;
+			sg_dma_len(buf->sg + i) = (size > data_size) ?
+				(bytes_per_desc - (size - data_size)) :
+				bytes_per_desc;
+		}
+
+		vb->state = VIDEOBUF_PREPARED;
+		buf->cookie = -1;
+		buf->fh = fh;
+	}
+
+	return 0;
+
+err:
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+	return err;
+}
+
+static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
+{
+	struct timblogiw_fh *fh = vq->priv_data;
+	struct timblogiw_buffer *buf = container_of(vb, struct timblogiw_buffer,
+		vb);
+	struct dma_async_tx_descriptor *desc;
+	int sg_elems;
+	int bytes_per_desc = TIMBLOGIW_LINES_PER_DESC *
+		timblogiw_bytes_per_line(fh->cur_norm);
+
+	sg_elems = timblogiw_frame_size(fh->cur_norm) / bytes_per_desc;
+	sg_elems +=
+		(timblogiw_frame_size(fh->cur_norm) % bytes_per_desc) ? 1 : 0;
+
+	if (list_empty(&fh->capture))
+		vb->state = VIDEOBUF_ACTIVE;
+	else
+		vb->state = VIDEOBUF_QUEUED;
+
+	list_add_tail(&vb->queue, &fh->capture);
+
+	spin_unlock_irq(&fh->queue_lock);
+
+	desc = fh->chan->device->device_prep_slave_sg(fh->chan,
+		buf->sg, sg_elems, DMA_FROM_DEVICE,
+		DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_SRC_UNMAP);
+	if (!desc) {
+		spin_lock_irq(&fh->queue_lock);
+		list_del_init(&vb->queue);
+		vb->state = VIDEOBUF_PREPARED;
+		return;
+	}
+
+	desc->callback_param = buf;
+	desc->callback = timblogiw_dma_cb;
+
+	buf->cookie = desc->tx_submit(desc);
+
+	spin_lock_irq(&fh->queue_lock);
+}
+
+static void buffer_release(struct videobuf_queue *vq,
+	struct videobuf_buffer *vb)
+{
+	struct timblogiw_fh *fh = vq->priv_data;
+	struct timblogiw_buffer *buf = container_of(vb, struct timblogiw_buffer,
+		vb);
+
+	videobuf_waiton(vq, vb, 0, 0);
+	if (buf->cookie >= 0)
+		dma_sync_wait(fh->chan, buf->cookie);
+
+	videobuf_dma_contig_free(vq, vb);
+	vb->state = VIDEOBUF_NEEDS_INIT;
+}
+
+static struct videobuf_queue_ops timblogiw_video_qops = {
+	.buf_setup      = buffer_setup,
+	.buf_prepare    = buffer_prepare,
+	.buf_queue      = buffer_queue,
+	.buf_release    = buffer_release,
+};
+
+/* Device Operations functions */
+
+static int timblogiw_open(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh;
+	v4l2_std_id std;
+	dma_cap_mask_t mask;
+	int err = 0;
+
+	dev_dbg(&vdev->dev, "%s: entry\n", __func__);
+
+	mutex_lock(&lw->lock);
+	if (lw->opened) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (TIMBLOGIW_HAS_DECODER(lw) && !lw->sd_enc) {
+		struct i2c_adapter *adapt;
+
+		/* find the video decoder */
+		adapt = i2c_get_adapter(lw->pdata.i2c_adapter);
+		if (!adapt) {
+			dev_err(&vdev->dev, "No I2C bus #%d\n",
+				lw->pdata.i2c_adapter);
+			err = -ENODEV;
+			goto out;
+		}
+
+		/* now find the encoder */
+		lw->sd_enc = v4l2_i2c_new_subdev_board(&lw->v4l2_dev, adapt,
+			lw->pdata.encoder.info, NULL);
+
+		i2c_put_adapter(adapt);
+
+		if (!lw->sd_enc) {
+			dev_err(&vdev->dev, "Failed to get encoder: %s\n",
+				lw->pdata.encoder.module_name);
+			err = -ENODEV;
+			goto out;
+		}
+	}
+
+	fh = kzalloc(sizeof(*fh), GFP_KERNEL);
+	if (!fh) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	fh->cur_norm = timblogiw_tvnorms;
+	timblogiw_querystd(file, fh, &std);
+	fh->cur_norm = timblogiw_get_norm(std);
+
+	INIT_LIST_HEAD(&fh->capture);
+	spin_lock_init(&fh->queue_lock);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	dma_cap_set(DMA_PRIVATE, mask);
+
+	/* find the DMA channel */
+	fh->chan = dma_request_channel(mask, timblogiw_dma_filter_fn,
+			(void *)(uintptr_t)lw->pdata.dma_channel);
+	if (!fh->chan) {
+		dev_err(&vdev->dev, "Failed to get DMA channel\n");
+		kfree(fh);
+		err = -ENODEV;
+		goto out;
+	}
+
+	file->private_data = fh;
+	videobuf_queue_dma_contig_init(&fh->vb_vidq,
+		&timblogiw_video_qops, lw->dev, &fh->queue_lock,
+		V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_NONE,
+		sizeof(struct timblogiw_buffer), fh, NULL);
+
+	lw->opened = true;
+out:
+	mutex_unlock(&lw->lock);
+
+	return err;
+}
+
+static int timblogiw_close(struct file *file)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw *lw = video_get_drvdata(vdev);
+	struct timblogiw_fh *fh = file->private_data;
+
+	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
+
+	videobuf_stop(&fh->vb_vidq);
+	videobuf_mmap_free(&fh->vb_vidq);
+
+	dma_release_channel(fh->chan);
+
+	kfree(fh);
+
+	mutex_lock(&lw->lock);
+	lw->opened = false;
+	mutex_unlock(&lw->lock);
+	return 0;
+}
+
+static ssize_t timblogiw_read(struct file *file, char __user *data,
+	size_t count, loff_t *ppos)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = file->private_data;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_read_stream(&fh->vb_vidq, data, count, ppos, 0,
+		file->f_flags & O_NONBLOCK);
+}
+
+static unsigned int timblogiw_poll(struct file *file,
+	struct poll_table_struct *wait)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = file->private_data;
+
+	dev_dbg(&vdev->dev, "%s: entry\n",  __func__);
+
+	return videobuf_poll_stream(file, &fh->vb_vidq, wait);
+}
+
+static int timblogiw_mmap(struct file *file, struct vm_area_struct *vma)
+{
+	struct video_device *vdev = video_devdata(file);
+	struct timblogiw_fh *fh = file->private_data;
+
+	dev_dbg(&vdev->dev, "%s: entry\n", __func__);
+
+	return videobuf_mmap_mapper(&fh->vb_vidq, vma);
+}
+
+/* Platform device functions */
+
+static __devinitconst struct v4l2_ioctl_ops timblogiw_ioctl_ops = {
+	.vidioc_querycap		= timblogiw_querycap,
+	.vidioc_enum_fmt_vid_cap	= timblogiw_enum_fmt,
+	.vidioc_g_fmt_vid_cap		= timblogiw_g_fmt,
+	.vidioc_try_fmt_vid_cap		= timblogiw_try_fmt,
+	.vidioc_s_fmt_vid_cap		= timblogiw_s_fmt,
+	.vidioc_g_parm			= timblogiw_g_parm,
+	.vidioc_reqbufs			= timblogiw_reqbufs,
+	.vidioc_querybuf		= timblogiw_querybuf,
+	.vidioc_qbuf			= timblogiw_qbuf,
+	.vidioc_dqbuf			= timblogiw_dqbuf,
+	.vidioc_g_std			= timblogiw_g_std,
+	.vidioc_s_std			= timblogiw_s_std,
+	.vidioc_enum_input		= timblogiw_enuminput,
+	.vidioc_g_input			= timblogiw_g_input,
+	.vidioc_s_input			= timblogiw_s_input,
+	.vidioc_streamon		= timblogiw_streamon,
+	.vidioc_streamoff		= timblogiw_streamoff,
+	.vidioc_querystd		= timblogiw_querystd,
+	.vidioc_enum_framesizes		= timblogiw_enum_framesizes,
+};
+
+static __devinitconst struct v4l2_file_operations timblogiw_fops = {
+	.owner		= THIS_MODULE,
+	.open		= timblogiw_open,
+	.release	= timblogiw_close,
+	.unlocked_ioctl		= video_ioctl2, /* V4L2 ioctl handler */
+	.mmap		= timblogiw_mmap,
+	.read		= timblogiw_read,
+	.poll		= timblogiw_poll,
+};
+
+static __devinitconst struct video_device timblogiw_template = {
+	.name		= TIMBLOGIWIN_NAME,
+	.fops		= &timblogiw_fops,
+	.ioctl_ops	= &timblogiw_ioctl_ops,
+	.release	= video_device_release_empty,
+	.minor		= -1,
+	.tvnorms	= V4L2_STD_PAL | V4L2_STD_NTSC
+};
+
+static int __devinit timblogiw_probe(struct platform_device *pdev)
+{
+	int err;
+	struct timblogiw *lw = NULL;
+	struct timb_video_platform_data *pdata = pdev->dev.platform_data;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data\n");
+		err = -EINVAL;
+		goto err;
+	}
+
+	if (!pdata->encoder.module_name)
+		dev_info(&pdev->dev, "Running without decoder\n");
+
+	lw = kzalloc(sizeof(*lw), GFP_KERNEL);
+	if (!lw) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	if (pdev->dev.parent)
+		lw->dev = pdev->dev.parent;
+	else
+		lw->dev = &pdev->dev;
+
+	memcpy(&lw->pdata, pdata, sizeof(lw->pdata));
+
+	mutex_init(&lw->lock);
+
+	lw->video_dev = timblogiw_template;
+
+	strlcpy(lw->v4l2_dev.name, DRIVER_NAME, sizeof(lw->v4l2_dev.name));
+	err = v4l2_device_register(NULL, &lw->v4l2_dev);
+	if (err)
+		goto err_register;
+
+	lw->video_dev.v4l2_dev = &lw->v4l2_dev;
+
+	platform_set_drvdata(pdev, lw);
+	video_set_drvdata(&lw->video_dev, lw);
+
+	err = video_register_device(&lw->video_dev, VFL_TYPE_GRABBER, 0);
+	if (err) {
+		dev_err(&pdev->dev, "Error reg video: %d\n", err);
+		goto err_request;
+	}
+
+
+	return 0;
+
+err_request:
+	platform_set_drvdata(pdev, NULL);
+	v4l2_device_unregister(&lw->v4l2_dev);
+err_register:
+	kfree(lw);
+err:
+	dev_err(&pdev->dev, "Failed to register: %d\n", err);
+
+	return err;
+}
+
+static int __devexit timblogiw_remove(struct platform_device *pdev)
+{
+	struct timblogiw *lw = platform_get_drvdata(pdev);
+
+	video_unregister_device(&lw->video_dev);
+
+	v4l2_device_unregister(&lw->v4l2_dev);
+
+	kfree(lw);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver timblogiw_platform_driver = {
+	.driver = {
+		.name	= DRIVER_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= timblogiw_probe,
+	.remove		= __devexit_p(timblogiw_remove),
+};
+
+/* Module functions */
+
+static int __init timblogiw_init(void)
+{
+	return platform_driver_register(&timblogiw_platform_driver);
+}
+
+static void __exit timblogiw_exit(void)
+{
+	platform_driver_unregister(&timblogiw_platform_driver);
+}
+
+module_init(timblogiw_init);
+module_exit(timblogiw_exit);
+
+MODULE_DESCRIPTION(TIMBLOGIWIN_NAME);
+MODULE_AUTHOR("Pelagicore AB <info@pelagicore.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:"DRIVER_NAME);
diff --git a/drivers/media/video/tlg2300/Kconfig b/drivers/media/video/tlg2300/Kconfig
index 1686ebfa695..645d915267e 100644
--- a/drivers/media/video/tlg2300/Kconfig
+++ b/drivers/media/video/tlg2300/Kconfig
@@ -1,9 +1,9 @@
 config VIDEO_TLG2300
 	tristate "Telegent TLG2300 USB video capture support"
-	depends on VIDEO_DEV && I2C && INPUT && SND && DVB_CORE
+	depends on VIDEO_DEV && I2C && SND && DVB_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
-	depends on VIDEO_IR
+	depends on RC_CORE
 	select VIDEOBUF_VMALLOC
 	select SND_PCM
 	select VIDEOBUF_DVB
diff --git a/drivers/media/video/tlg2300/pd-main.c b/drivers/media/video/tlg2300/pd-main.c
index 4555f4a5f4c..99c81a9a4f4 100644
--- a/drivers/media/video/tlg2300/pd-main.c
+++ b/drivers/media/video/tlg2300/pd-main.c
@@ -36,7 +36,6 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/firmware.h>
-#include <linux/smp_lock.h>
 
 #include "vendorcmds.h"
 #include "pd-common.h"
@@ -453,7 +452,8 @@ static int poseidon_probe(struct usb_interface *interface,
 
 	device_init_wakeup(&udev->dev, 1);
 #ifdef CONFIG_PM
-	pd->udev->autosuspend_delay = HZ * PM_SUSPEND_DELAY;
+	pm_runtime_set_autosuspend_delay(&pd->udev->dev,
+			1000 * PM_SUSPEND_DELAY);
 	usb_enable_autosuspend(pd->udev);
 
 	if (in_hibernation(pd)) {
@@ -485,15 +485,11 @@ static void poseidon_disconnect(struct usb_interface *interface)
 	/*unregister v4l2 device */
 	v4l2_device_unregister(&pd->v4l2_dev);
 
-	lock_kernel();
-	{
-		pd_dvb_usb_device_exit(pd);
-		poseidon_fm_exit(pd);
+	pd_dvb_usb_device_exit(pd);
+	poseidon_fm_exit(pd);
 
-		poseidon_audio_free(pd);
-		pd_video_exit(pd);
-	}
-	unlock_kernel();
+	poseidon_audio_free(pd);
+	pd_video_exit(pd);
 
 	usb_set_intfdata(interface, NULL);
 	kref_put(&pd->kref, poseidon_delete);
diff --git a/drivers/media/video/usbvideo/Kconfig b/drivers/media/video/usbvideo/Kconfig
deleted file mode 100644
index dfa7fc68a65..00000000000
--- a/drivers/media/video/usbvideo/Kconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-config VIDEO_USBVIDEO
-	tristate
-
-config USB_VICAM
-	tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)"
-	depends on VIDEO_V4L1 && EXPERIMENTAL
-	select VIDEO_USBVIDEO
-	---help---
-	  Say Y here if you have 3com homeconnect camera (vicam).
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vicam.
-
-config USB_IBMCAM
-	tristate "USB IBM (Xirlink) C-it Camera support (DEPRECATED)"
-	depends on VIDEO_V4L1
-	select VIDEO_USBVIDEO
-	---help---
-	  This driver is DEPRECATED please use the gspca xirlink_cit module
-	  instead.
-
-	  Say Y here if you want to connect a IBM "C-It" camera, also known as
-	  "Xirlink PC Camera" to your computer's USB port.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ibmcam.
-
-	  This camera has several configuration options which
-	  can be specified when you load the module. Read
-	  <file:Documentation/video4linux/ibmcam.txt> to learn more.
-
-config USB_KONICAWC
-	tristate "USB Konica Webcam support (DEPRECATED)"
-	depends on VIDEO_V4L1
-	select VIDEO_USBVIDEO
-	---help---
-	  This driver is DEPRECATED (and known to crash) please use the
-	  gspca konica module instead.
-
-	  Say Y here if you want support for webcams based on a Konica
-	  chipset. This is known to work with the Intel YC76 webcam.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called konicawc.
-
diff --git a/drivers/media/video/usbvideo/Makefile b/drivers/media/video/usbvideo/Makefile
deleted file mode 100644
index bb52eb8dc2f..00000000000
--- a/drivers/media/video/usbvideo/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-obj-$(CONFIG_VIDEO_USBVIDEO)    += usbvideo.o
-obj-$(CONFIG_USB_IBMCAM)        += ibmcam.o ultracam.o
-obj-$(CONFIG_USB_KONICAWC)      += konicawc.o
-obj-$(CONFIG_USB_VICAM)         += vicam.o
diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c
deleted file mode 100644
index b0854966178..00000000000
--- a/drivers/media/video/usbvideo/ibmcam.c
+++ /dev/null
@@ -1,3977 +0,0 @@
-/*
- * USB IBM C-It Video Camera driver
- *
- * Supports Xirlink C-It Video Camera, IBM PC Camera,
- * IBM NetCamera and Veo Stingray.
- *
- * This driver is based on earlier work of:
- *
- * (C) Copyright 1999 Johannes Erdfelt
- * (C) Copyright 1999 Randy Dunlap
- *
- * 5/24/00 Removed optional (and unnecessary) locking of the driver while
- * the device remains plugged in. Corrected race conditions in ibmcam_open
- * and ibmcam_probe() routines using this as a guideline:
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "usbvideo.h"
-
-#define IBMCAM_VENDOR_ID	0x0545
-#define IBMCAM_PRODUCT_ID	0x8080
-#define NETCAM_PRODUCT_ID	0x8002	/* IBM NetCamera, close to model 2 */
-#define VEO_800C_PRODUCT_ID	0x800C	/* Veo Stingray, repackaged Model 2 */
-#define VEO_800D_PRODUCT_ID	0x800D	/* Veo Stingray, repackaged Model 4 */
-
-#define MAX_IBMCAM		4	/* How many devices we allow to connect */
-#define USES_IBMCAM_PUTPIXEL    0       /* 0=Fast/oops 1=Slow/secure */
-
-/* Header signatures */
-
-/* Model 1 header: 00 FF 00 xx */
-#define HDRSIG_MODEL1_128x96	0x06	/* U Y V Y ... */
-#define HDRSIG_MODEL1_176x144	0x0e	/* U Y V Y ... */
-#define HDRSIG_MODEL1_352x288	0x00	/* V Y U Y ... */
-
-#define	IBMCAM_MODEL_1	1	/* XVP-501, 3 interfaces, rev. 0.02 */
-#define IBMCAM_MODEL_2	2	/* KSX-X9903, 2 interfaces, rev. 3.0a */
-#define IBMCAM_MODEL_3	3	/* KSX-X9902, 2 interfaces, rev. 3.01 */
-#define	IBMCAM_MODEL_4	4	/* IBM NetCamera, 0545/8002/3.0a */
-
-/* Video sizes supported */
-#define	VIDEOSIZE_128x96	VIDEOSIZE(128, 96)
-#define	VIDEOSIZE_176x144	VIDEOSIZE(176,144)
-#define	VIDEOSIZE_352x288	VIDEOSIZE(352,288)
-#define	VIDEOSIZE_320x240	VIDEOSIZE(320,240)
-#define	VIDEOSIZE_352x240	VIDEOSIZE(352,240)
-#define	VIDEOSIZE_640x480	VIDEOSIZE(640,480)
-#define	VIDEOSIZE_160x120	VIDEOSIZE(160,120)
-
-/* Video sizes supported */
-enum {
-	SIZE_128x96 = 0,
-	SIZE_160x120,
-	SIZE_176x144,
-	SIZE_320x240,
-	SIZE_352x240,
-	SIZE_352x288,
-	SIZE_640x480,
-	/* Add/remove/rearrange items before this line */
-	SIZE_LastItem
-};
-
-/*
- * This structure lives in uvd->user field.
- */
-typedef struct {
-	int initialized;	/* Had we already sent init sequence? */
-	int camera_model;	/* What type of IBM camera we got? */
-	int has_hdr;
-} ibmcam_t;
-#define	IBMCAM_T(uvd)	((ibmcam_t *)((uvd)->user_data))
-
-static struct usbvideo *cams;
-
-static int debug;
-
-static int flags; /* = FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */
-
-static const int min_canvasWidth  = 8;
-static const int min_canvasHeight = 4;
-
-static int lighting = 1; /* Medium */
-
-#define SHARPNESS_MIN	0
-#define SHARPNESS_MAX	6
-static int sharpness = 4; /* Low noise, good details */
-
-#define FRAMERATE_MIN	0
-#define FRAMERATE_MAX	6
-static int framerate = -1;
-
-static int size = SIZE_352x288;
-
-/*
- * Here we define several initialization variables. They may
- * be used to automatically set color, hue, brightness and
- * contrast to desired values. This is particularly useful in
- * case of webcams (which have no controls and no on-screen
- * output) and also when a client V4L software is used that
- * does not have some of those controls. In any case it's
- * good to have startup values as options.
- *
- * These values are all in [0..255] range. This simplifies
- * operation. Note that actual values of V4L variables may
- * be scaled up (as much as << 8). User can see that only
- * on overlay output, however, or through a V4L client.
- */
-static int init_brightness = 128;
-static int init_contrast = 192;
-static int init_color = 128;
-static int init_hue = 128;
-static int hue_correction = 128;
-
-/* Settings for camera model 2 */
-static int init_model2_rg2 = -1;
-static int init_model2_sat = -1;
-static int init_model2_yb = -1;
-
-/* 01.01.08 - Added for RCA video in support -LO */
-/* Settings for camera model 3 */
-static int init_model3_input;
-
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
-module_param(flags, int, 0);
-MODULE_PARM_DESC(flags, "Bitfield: 0=VIDIOCSYNC, 1=B/W, 2=show hints, 3=show stats, 4=test pattern, 5=separate frames, 6=clean frames");
-module_param(framerate, int, 0);
-MODULE_PARM_DESC(framerate, "Framerate setting: 0=slowest, 6=fastest (default=2)");
-module_param(lighting, int, 0);
-MODULE_PARM_DESC(lighting, "Photosensitivity: 0=bright, 1=medium (default), 2=low light");
-module_param(sharpness, int, 0);
-MODULE_PARM_DESC(sharpness, "Model1 noise reduction: 0=smooth, 6=sharp (default=4)");
-module_param(size, int, 0);
-MODULE_PARM_DESC(size, "Image size: 0=128x96 1=160x120 2=176x144 3=320x240 4=352x240 5=352x288 6=640x480  (default=5)");
-module_param(init_brightness, int, 0);
-MODULE_PARM_DESC(init_brightness, "Brightness preconfiguration: 0-255 (default=128)");
-module_param(init_contrast, int, 0);
-MODULE_PARM_DESC(init_contrast, "Contrast preconfiguration: 0-255 (default=192)");
-module_param(init_color, int, 0);
-MODULE_PARM_DESC(init_color, "Color preconfiguration: 0-255 (default=128)");
-module_param(init_hue, int, 0);
-MODULE_PARM_DESC(init_hue, "Hue preconfiguration: 0-255 (default=128)");
-module_param(hue_correction, int, 0);
-MODULE_PARM_DESC(hue_correction, "YUV colorspace regulation: 0-255 (default=128)");
-
-module_param(init_model2_rg2, int, 0);
-MODULE_PARM_DESC(init_model2_rg2, "Model2 preconfiguration: 0-255 (default=47)");
-module_param(init_model2_sat, int, 0);
-MODULE_PARM_DESC(init_model2_sat, "Model2 preconfiguration: 0-255 (default=52)");
-module_param(init_model2_yb, int, 0);
-MODULE_PARM_DESC(init_model2_yb, "Model2 preconfiguration: 0-255 (default=160)");
-
-/* 01.01.08 - Added for RCA video in support -LO */
-module_param(init_model3_input, int, 0);
-MODULE_PARM_DESC(init_model3_input, "Model3 input: 0=CCD 1=RCA");
-
-MODULE_AUTHOR ("Dmitri");
-MODULE_DESCRIPTION ("IBM/Xirlink C-it USB Camera Driver for Linux (c) 2000");
-MODULE_LICENSE("GPL");
-
-/* Still mysterious i2c commands */
-static const unsigned short unknown_88 = 0x0088;
-static const unsigned short unknown_89 = 0x0089;
-static const unsigned short bright_3x[3] = { 0x0031, 0x0032, 0x0033 };
-static const unsigned short contrast_14 = 0x0014;
-static const unsigned short light_27 = 0x0027;
-static const unsigned short sharp_13 = 0x0013;
-
-/* i2c commands for Model 2 cameras */
-static const unsigned short mod2_brightness = 0x001a;		/* $5b .. $ee; default=$5a */
-static const unsigned short mod2_set_framerate = 0x001c;	/* 0 (fast).. $1F (slow) */
-static const unsigned short mod2_color_balance_rg2 = 0x001e;	/* 0 (red) .. $7F (green) */
-static const unsigned short mod2_saturation = 0x0020;		/* 0 (b/w) - $7F (full color) */
-static const unsigned short mod2_color_balance_yb = 0x0022;	/* 0..$7F, $50 is about right */
-static const unsigned short mod2_hue = 0x0024;			/* 0..$7F, $70 is about right */
-static const unsigned short mod2_sensitivity = 0x0028;		/* 0 (min) .. $1F (max) */
-
-struct struct_initData {
-	unsigned char req;
-	unsigned short value;
-	unsigned short index;
-};
-
-/*
- * ibmcam_size_to_videosize()
- *
- * This procedure converts module option 'size' into the actual
- * videosize_t that defines the image size in pixels. We need
- * simplified 'size' because user wants a simple enumerated list
- * of choices, not an infinite set of possibilities.
- */
-static videosize_t ibmcam_size_to_videosize(int size)
-{
-	videosize_t vs = VIDEOSIZE_352x288;
-	RESTRICT_TO_RANGE(size, 0, (SIZE_LastItem-1));
-	switch (size) {
-	case SIZE_128x96:
-		vs = VIDEOSIZE_128x96;
-		break;
-	case SIZE_160x120:
-		vs = VIDEOSIZE_160x120;
-		break;
-	case SIZE_176x144:
-		vs = VIDEOSIZE_176x144;
-		break;
-	case SIZE_320x240:
-		vs = VIDEOSIZE_320x240;
-		break;
-	case SIZE_352x240:
-		vs = VIDEOSIZE_352x240;
-		break;
-	case SIZE_352x288:
-		vs = VIDEOSIZE_352x288;
-		break;
-	case SIZE_640x480:
-		vs = VIDEOSIZE_640x480;
-		break;
-	default:
-		err("size=%d. is not valid", size);
-		break;
-	}
-	return vs;
-}
-
-/*
- * ibmcam_find_header()
- *
- * Locate one of supported header markers in the queue.
- * Once found, remove all preceding bytes AND the marker (4 bytes)
- * from the data pump queue. Whatever follows must be video lines.
- *
- * History:
- * 1/21/00  Created.
- */
-static enum ParseState ibmcam_find_header(struct uvd *uvd) /* FIXME: Add frame here */
-{
-	struct usbvideo_frame *frame;
-	ibmcam_t *icam;
-
-	if ((uvd->curframe) < 0 || (uvd->curframe >= USBVIDEO_NUMFRAMES)) {
-		err("ibmcam_find_header: Illegal frame %d.", uvd->curframe);
-		return scan_EndParse;
-	}
-	icam = IBMCAM_T(uvd);
-	assert(icam != NULL);
-	frame = &uvd->frame[uvd->curframe];
-	icam->has_hdr = 0;
-	switch (icam->camera_model) {
-	case IBMCAM_MODEL_1:
-	{
-		const int marker_len = 4;
-		while (RingQueue_GetLength(&uvd->dp) >= marker_len) {
-			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00))
-			{
-#if 0				/* This code helps to detect new frame markers */
-				dev_info(&uvd->dev->dev,
-					 "Header sig: 00 FF 00 %02X\n",
-					 RING_QUEUE_PEEK(&uvd->dp, 3));
-#endif
-				frame->header = RING_QUEUE_PEEK(&uvd->dp, 3);
-				if ((frame->header == HDRSIG_MODEL1_128x96) ||
-				    (frame->header == HDRSIG_MODEL1_176x144) ||
-				    (frame->header == HDRSIG_MODEL1_352x288))
-				{
-#if 0
-					dev_info(&uvd->dev->dev,
-						 "Header found.\n");
-#endif
-					RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
-					icam->has_hdr = 1;
-					break;
-				}
-			}
-			/* If we are still here then this doesn't look like a header */
-			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
-		}
-		break;
-	}
-	case IBMCAM_MODEL_2:
-case IBMCAM_MODEL_4:
-	{
-		int marker_len = 0;
-		switch (uvd->videosize) {
-		case VIDEOSIZE_176x144:
-			marker_len = 10;
-			break;
-		default:
-			marker_len = 2;
-			break;
-		}
-		while (RingQueue_GetLength(&uvd->dp) >= marker_len) {
-			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF))
-			{
-#if 0
-				dev_info(&uvd->dev->dev, "Header found.\n");
-#endif
-				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
-				icam->has_hdr = 1;
-				frame->header = HDRSIG_MODEL1_176x144;
-				break;
-			}
-			/* If we are still here then this doesn't look like a header */
-			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
-		}
-		break;
-	}
-	case IBMCAM_MODEL_3:
-	{	/*
-		 * Headers: (one precedes every frame). nc=no compression,
-		 * bq=best quality bf=best frame rate.
-		 *
-		 * 176x144: 00 FF 02 { 0A=nc CA=bq EA=bf }
-		 * 320x240: 00 FF 02 { 08=nc 28=bq 68=bf }
-		 * 640x480: 00 FF 03 { 08=nc 28=bq 68=bf }
-		 *
-		 * Bytes '00 FF' seem to indicate header. Other two bytes
-		 * encode the frame type. This is a set of bit fields that
-		 * encode image size, compression type etc. These fields
-		 * do NOT contain frame number because all frames carry
-		 * the same header.
-		 */
-		const int marker_len = 4;
-		while (RingQueue_GetLength(&uvd->dp) >= marker_len) {
-			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xFF) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 2) != 0xFF))
-			{
-				/*
-				 * Combine 2 bytes of frame type into one
-				 * easy to use value
-				 */
-				unsigned long byte3, byte4;
-
-				byte3 = RING_QUEUE_PEEK(&uvd->dp, 2);
-				byte4 = RING_QUEUE_PEEK(&uvd->dp, 3);
-				frame->header = (byte3 << 8) | byte4;
-#if 0
-				dev_info(&uvd->dev->dev, "Header found.\n");
-#endif
-				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, marker_len);
-				icam->has_hdr = 1;
-				break;
-			}
-			/* If we are still here then this doesn't look like a header */
-			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
-		}
-		break;
-	}
-	default:
-		break;
-	}
-	if (!icam->has_hdr) {
-		if (uvd->debug > 2)
-			dev_info(&uvd->dev->dev,
-				 "Skipping frame, no header\n");
-		return scan_EndParse;
-	}
-
-	/* Header found */
-	icam->has_hdr = 1;
-	uvd->stats.header_count++;
-	frame->scanstate = ScanState_Lines;
-	frame->curline = 0;
-
-	if (flags & FLAGS_FORCE_TESTPATTERN) {
-		usbvideo_TestPattern(uvd, 1, 1);
-		return scan_NextFrame;
-	}
-	return scan_Continue;
-}
-
-/*
- * ibmcam_parse_lines()
- *
- * Parse one line (interlaced) from the buffer, put
- * decoded RGB value into the current frame buffer
- * and add the written number of bytes (RGB) to
- * the *pcopylen.
- *
- * History:
- * 21-Jan-2000 Created.
- * 12-Oct-2000 Reworked to reflect interlaced nature of the data.
- */
-static enum ParseState ibmcam_parse_lines(
-	struct uvd *uvd,
-	struct usbvideo_frame *frame,
-	long *pcopylen)
-{
-	unsigned char *f;
-	ibmcam_t *icam;
-	unsigned int len, scanLength, scanHeight, order_uv, order_yc;
-	int v4l_linesize; /* V4L line offset */
-	const int hue_corr  = (uvd->vpic.hue - 0x8000) >> 10;	/* -32..+31 */
-	const int hue2_corr = (hue_correction - 128) / 4;		/* -32..+31 */
-	const int ccm = 128; /* Color correction median - see below */
-	int y, u, v, i, frame_done=0, color_corr;
-	static unsigned char lineBuffer[640*3];
-	unsigned const char *chromaLine, *lumaLine;
-
-	assert(uvd != NULL);
-	assert(frame != NULL);
-	icam = IBMCAM_T(uvd);
-	assert(icam != NULL);
-	color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
-	RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1);
-
-	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-
-	if (IBMCAM_T(uvd)->camera_model == IBMCAM_MODEL_4) {
-		/* Model 4 frame markers do not carry image size identification */
-		switch (uvd->videosize) {
-		case VIDEOSIZE_128x96:
-		case VIDEOSIZE_160x120:
-		case VIDEOSIZE_176x144:
-			scanLength = VIDEOSIZE_X(uvd->videosize);
-			scanHeight = VIDEOSIZE_Y(uvd->videosize);
-			break;
-		default:
-			err("ibmcam_parse_lines: Wrong mode.");
-			return scan_Out;
-		}
-		order_yc = 1;	/* order_yc: true=Yc false=cY ('c'=either U or V) */
-		order_uv = 1;	/* Always true in this algorithm */
-	} else {
-		switch (frame->header) {
-		case HDRSIG_MODEL1_128x96:
-			scanLength = 128;
-			scanHeight = 96;
-			order_uv = 1;	/* U Y V Y ... */
-			break;
-		case HDRSIG_MODEL1_176x144:
-			scanLength = 176;
-			scanHeight = 144;
-			order_uv = 1;	/* U Y V Y ... */
-			break;
-		case HDRSIG_MODEL1_352x288:
-			scanLength = 352;
-			scanHeight = 288;
-			order_uv = 0;	/* Y V Y V ... */
-			break;
-		default:
-			err("Unknown header signature 00 FF 00 %02lX", frame->header);
-			return scan_NextFrame;
-		}
-		/* order_yc: true=Yc false=cY ('c'=either U or V) */
-		order_yc = (IBMCAM_T(uvd)->camera_model == IBMCAM_MODEL_2);
-	}
-
-	len = scanLength * 3;
-	assert(len <= sizeof(lineBuffer));
-
-	/*
-	 * Lines are organized this way:
-	 *
-	 * I420:
-	 * ~~~~
-	 * <scanLength->
-	 * ___________________________________
-	 * |-----Y-----|---UVUVUV...UVUV-----| \
-	 * |-----------+---------------------|  \
-	 * |<-- 176 -->|<------ 176*2 ------>|  Total 72. lines (interlaced)
-	 * |...	   ... |        ...          |  /
-	 * |<-- 352 -->|<------ 352*2 ------>|  Total 144. lines (interlaced)
-	 * |___________|_____________________| /
-	 *  \           \
-	 *   lumaLine    chromaLine
-	 */
-
-	/* Make sure there's enough data for the entire line */
-	if (RingQueue_GetLength(&uvd->dp) < len)
-		return scan_Out;
-
-	/* Suck one line out of the ring queue */
-	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
-
-	/*
-	 * Make sure that our writing into output buffer
-	 * will not exceed the buffer. Mind that we may write
-	 * not into current output scanline but in several after
-	 * it as well (if we enlarge image vertically.)
-	 */
-	if ((frame->curline + 2) >= VIDEOSIZE_Y(frame->request))
-		return scan_NextFrame;
-
-	/*
-	 * Now we are sure that entire line (representing all 'scanLength'
-	 * pixels from the camera) is available in the buffer. We
-	 * start copying the line left-aligned to the V4L buffer.
-	 * If the camera line is shorter then we should pad the V4L
-	 * buffer with something (black) to complete the line.
-	 */
-	assert(frame->data != NULL);
-	f = frame->data + (v4l_linesize * frame->curline);
-
-	/*
-	 * To obtain chrominance data from the 'chromaLine' use this:
-	 *   v = chromaLine[0]; // 0-1:[0], 2-3:[4], 4-5:[8]...
-	 *   u = chromaLine[2]; // 0-1:[2], 2-3:[6], 4-5:[10]...
-	 *
-	 * Indices must be calculated this way:
-	 * v_index = (i >> 1) << 2;
-	 * u_index = (i >> 1) << 2 + 2;
-	 *
-	 * where 'i' is the column number [0..VIDEOSIZE_X(frame->request)-1]
-	 */
-	lumaLine = lineBuffer;
-	chromaLine = lineBuffer + scanLength;
-	for (i = 0; i < VIDEOSIZE_X(frame->request); i++)
-	{
-		unsigned char rv, gv, bv;	/* RGB components */
-
-		/* Check for various visual debugging hints (colorized pixels) */
-		if ((flags & FLAGS_DISPLAY_HINTS) && (icam->has_hdr)) {
-			/*
-			 * This is bad and should not happen. This means that
-			 * we somehow overshoot the line and encountered new
-			 * frame! Obviously our camera/V4L frame size is out
-			 * of whack. This cyan dot will help you to figure
-			 * out where exactly the new frame arrived.
-			 */
-			if (icam->has_hdr == 1) {
-				bv = 0; /* Yellow marker */
-				gv = 0xFF;
-				rv = 0xFF;
-			} else {
-				bv = 0xFF; /* Cyan marker */
-				gv = 0xFF;
-				rv = 0;
-			}
-			icam->has_hdr = 0;
-			goto make_pixel;
-		}
-
-		/*
-		 * Check if we are still in range. We may be out of range if our
-		 * V4L canvas is wider or taller than the camera "native" image.
-		 * Then we quickly fill the remainder of the line with zeros to
-		 * make black color and quit the horizontal scanning loop.
-		 */
-		if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
-			const int j = i * V4L_BYTES_PER_PIXEL;
-#if USES_IBMCAM_PUTPIXEL
-			/* Refresh 'f' because we don't use it much with PUTPIXEL */
-			f = frame->data + (v4l_linesize * frame->curline) + j;
-#endif
-			memset(f, 0, v4l_linesize - j);
-			break;
-		}
-
-		y = lumaLine[i];
-		if (flags & FLAGS_MONOCHROME) /* Use monochrome for debugging */
-			rv = gv = bv = y;
-		else {
-			int off_0, off_2;
-
-			off_0 = (i >> 1) << 2;
-			off_2 = off_0 + 2;
-
-			if (order_yc) {
-				off_0++;
-				off_2++;
-			}
-			if (!order_uv) {
-				off_0 += 2;
-				off_2 -= 2;
-			}
-			u = chromaLine[off_0] + hue_corr;
-			v = chromaLine[off_2] + hue2_corr;
-
-			/* Apply color correction */
-			if (color_corr != 0) {
-				/* Magnify up to 2 times, reduce down to zero saturation */
-				u = 128 + ((ccm + color_corr) * (u - 128)) / ccm;
-				v = 128 + ((ccm + color_corr) * (v - 128)) / ccm;
-			}
-			YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv);
-		}
-
-	make_pixel:
-		/*
-		 * The purpose of creating the pixel here, in one,
-		 * dedicated place is that we may need to make the
-		 * pixel wider and taller than it actually is. This
-		 * may be used if camera generates small frames for
-		 * sake of frame rate (or any other reason.)
-		 *
-		 * The output data consists of B, G, R bytes
-		 * (in this order).
-		 */
-#if USES_IBMCAM_PUTPIXEL
-		RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv);
-#else
-		*f++ = bv;
-		*f++ = gv;
-		*f++ = rv;
-#endif
-		/*
-		 * Typically we do not decide within a legitimate frame
-		 * that we want to end the frame. However debugging code
-		 * may detect marker of new frame within the data. Then
-		 * this condition activates. The 'data' pointer is already
-		 * pointing at the new marker, so we'd better leave it as is.
-		 */
-		if (frame_done)
-			break;	/* End scanning of lines */
-	}
-	/*
-	 * Account for number of bytes that we wrote into output V4L frame.
-	 * We do it here, after we are done with the scanline, because we
-	 * may fill more than one output scanline if we do vertical
-	 * enlargement.
-	 */
-	frame->curline += 2;
-	if (pcopylen != NULL)
-		*pcopylen += 2 * v4l_linesize;
-	frame->deinterlace = Deinterlace_FillOddLines;
-
-	if (frame_done || (frame->curline >= VIDEOSIZE_Y(frame->request)))
-		return scan_NextFrame;
-	else
-		return scan_Continue;
-}
-
-/*
- * ibmcam_model2_320x240_parse_lines()
- *
- * This procedure deals with a weird RGB format that is produced by IBM
- * camera model 2 in modes 320x240 and above; 'x' below is 159 or 175,
- * depending on horizontal size of the picture:
- *
- * <--- 160 or 176 pairs of RA,RB bytes ----->
- * *-----------------------------------------* \
- * | RA0 | RB0 | RA1 | RB1 | ... | RAx | RBx |  \   This is pair of horizontal lines,
- * |-----+-----+-----+-----+ ... +-----+-----|   *- or one interlaced line, total
- * | B0  | G0  | B1  | G1  | ... | Bx  | Gx  |  /   120 or 144 such pairs which yield
- * |=====+=====+=====+=====+ ... +=====+=====| /    240 or 288 lines after deinterlacing.
- *
- * Each group of FOUR bytes (RAi, RBi, Bi, Gi) where i=0..frame_width/2-1
- * defines ONE pixel. Therefore this format yields 176x144 "decoded"
- * resolution at best. I do not know why camera sends such format - the
- * previous model (1) just used interlaced I420 and everyone was happy.
- *
- * I do not know what is the difference between RAi and RBi bytes. Both
- * seemingly represent R component, but slightly vary in value (so that
- * the picture looks a bit colored if one or another is used). I use
- * them both as R component in attempt to at least partially recover the
- * lost resolution.
- */
-static enum ParseState ibmcam_model2_320x240_parse_lines(
-	struct uvd *uvd,
-	struct usbvideo_frame *frame,
-	long *pcopylen)
-{
-	unsigned char *f, *la, *lb;
-	unsigned int len;
-	int v4l_linesize; /* V4L line offset */
-	int i, j, frame_done=0, color_corr;
-	int scanLength, scanHeight;
-	static unsigned char lineBuffer[352*2];
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_320x240:
-	case VIDEOSIZE_352x240:
-	case VIDEOSIZE_352x288:
-		scanLength = VIDEOSIZE_X(uvd->videosize);
-		scanHeight = VIDEOSIZE_Y(uvd->videosize);
-		break;
-	default:
-		err("ibmcam_model2_320x240_parse_lines: Wrong mode.");
-		return scan_Out;
-	}
-
-	color_corr = (uvd->vpic.colour) >> 8; /* 0..+255 */
-	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-
-	len = scanLength * 2; /* See explanation above */
-	assert(len <= sizeof(lineBuffer));
-
-	/* Make sure there's enough data for the entire line */
-	if (RingQueue_GetLength(&uvd->dp) < len)
-		return scan_Out;
-
-	/* Suck one line out of the ring queue */
-	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
-
-	/*
-	 * Make sure that our writing into output buffer
-	 * will not exceed the buffer. Mind that we may write
-	 * not into current output scanline but in several after
-	 * it as well (if we enlarge image vertically.)
-	 */
-	if ((frame->curline + 2) >= VIDEOSIZE_Y(frame->request))
-		return scan_NextFrame;
-
-	la = lineBuffer;
-	lb = lineBuffer + scanLength;
-
-	/*
-	 * Now we are sure that entire line (representing all
-	 *         VIDEOSIZE_X(frame->request)
-	 * pixels from the camera) is available in the scratch buffer. We
-	 * start copying the line left-aligned to the V4L buffer (which
-	 * might be larger - not smaller, hopefully). If the camera
-	 * line is shorter then we should pad the V4L buffer with something
-	 * (black in this case) to complete the line.
-	 */
-	f = frame->data + (v4l_linesize * frame->curline);
-
-	/* Fill the 2-line strip */
-	for (i = 0; i < VIDEOSIZE_X(frame->request); i++) {
-		int y, rv, gv, bv;	/* RGB components */
-
-		j = i & (~1);
-
-		/* Check for various visual debugging hints (colorized pixels) */
-		if ((flags & FLAGS_DISPLAY_HINTS) && (IBMCAM_T(uvd)->has_hdr)) {
-			if (IBMCAM_T(uvd)->has_hdr == 1) {
-				bv = 0; /* Yellow marker */
-				gv = 0xFF;
-				rv = 0xFF;
-			} else {
-				bv = 0xFF; /* Cyan marker */
-				gv = 0xFF;
-				rv = 0;
-			}
-			IBMCAM_T(uvd)->has_hdr = 0;
-			goto make_pixel;
-		}
-
-		/*
-		 * Check if we are still in range. We may be out of range if our
-		 * V4L canvas is wider or taller than the camera "native" image.
-		 * Then we quickly fill the remainder of the line with zeros to
-		 * make black color and quit the horizontal scanning loop.
-		 */
-		if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
-			const int offset = i * V4L_BYTES_PER_PIXEL;
-#if USES_IBMCAM_PUTPIXEL
-			/* Refresh 'f' because we don't use it much with PUTPIXEL */
-			f = frame->data + (v4l_linesize * frame->curline) + offset;
-#endif
-			memset(f, 0, v4l_linesize - offset);
-			break;
-		}
-
-		/*
-		 * Here I use RA and RB components, one per physical pixel.
-		 * This causes fine vertical grid on the picture but may improve
-		 * horizontal resolution. If you prefer replicating, use this:
-		 *   rv = la[j + 0];   ... or ... rv = la[j + 1];
-		 * then the pixel will be replicated.
-		 */
-		rv = la[i];
-		gv = lb[j + 1];
-		bv = lb[j + 0];
-
-		y = (rv + gv + bv) / 3; /* Brightness (badly calculated) */
-
-		if (flags & FLAGS_MONOCHROME) /* Use monochrome for debugging */
-			rv = gv = bv = y;
-		else if (color_corr != 128) {
-
-			/* Calculate difference between color and brightness */
-			rv -= y;
-			gv -= y;
-			bv -= y;
-
-			/* Scale differences */
-			rv = (rv * color_corr) / 128;
-			gv = (gv * color_corr) / 128;
-			bv = (bv * color_corr) / 128;
-
-			/* Reapply brightness */
-			rv += y;
-			gv += y;
-			bv += y;
-
-			/* Watch for overflows */
-			RESTRICT_TO_RANGE(rv, 0, 255);
-			RESTRICT_TO_RANGE(gv, 0, 255);
-			RESTRICT_TO_RANGE(bv, 0, 255);
-		}
-
-	make_pixel:
-		RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv);
-	}
-	/*
-	 * Account for number of bytes that we wrote into output V4L frame.
-	 * We do it here, after we are done with the scanline, because we
-	 * may fill more than one output scanline if we do vertical
-	 * enlargement.
-	 */
-	frame->curline += 2;
-	*pcopylen += v4l_linesize * 2;
-	frame->deinterlace = Deinterlace_FillOddLines;
-
-	if (frame_done || (frame->curline >= VIDEOSIZE_Y(frame->request)))
-		return scan_NextFrame;
-	else
-		return scan_Continue;
-}
-
-/*
- * ibmcam_model3_parse_lines()
- *
- * | Even lines |     Odd Lines       |
- * -----------------------------------|
- * |YYY........Y|UYVYUYVY.........UYVY|
- * |YYY........Y|UYVYUYVY.........UYVY|
- * |............|.....................|
- * |YYY........Y|UYVYUYVY.........UYVY|
- * |------------+---------------------|
- *
- * There is one (U, V) chroma pair for every four luma (Y) values.  This
- * function reads a pair of lines at a time and obtains missing chroma values
- * from adjacent pixels.
- */
-static enum ParseState ibmcam_model3_parse_lines(
-	struct uvd *uvd,
-	struct usbvideo_frame *frame,
-	long *pcopylen)
-{
-	unsigned char *data;
-	const unsigned char *color;
-	unsigned int len;
-	int v4l_linesize; /* V4L line offset */
-	const int hue_corr  = (uvd->vpic.hue - 0x8000) >> 10;	/* -32..+31 */
-	const int hue2_corr = (hue_correction - 128) / 4;		/* -32..+31 */
-	const int ccm = 128; /* Color correction median - see below */
-	int i, u, v, rw, data_w=0, data_h=0, color_corr;
-	static unsigned char lineBuffer[640*3];
-	int line;
-
-	color_corr = (uvd->vpic.colour - 0x8000) >> 8; /* -128..+127 = -ccm..+(ccm-1)*/
-	RESTRICT_TO_RANGE(color_corr, -ccm, ccm+1);
-
-	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-
-	/* The header tells us what sort of data is in this frame */
-	switch (frame->header) {
-		/*
-		 * Uncompressed modes (that are easy to decode).
-		 */
-	case 0x0308:
-		data_w = 640;
-		data_h = 480;
-		break;
-	case 0x0208:
-		data_w = 320;
-		data_h = 240;
-		break;
-	case 0x020A:
-		data_w = 160;
-		data_h = 120;
-		break;
-		/*
-		 * Compressed modes (ViCE - that I don't know how to decode).
-		 */
-	case 0x0328:	/* 640x480, best quality compression */
-	case 0x0368:	/* 640x480, best frame rate compression */
-	case 0x0228:	/* 320x240, best quality compression */
-	case 0x0268:	/* 320x240, best frame rate compression */
-	case 0x02CA:	/* 160x120, best quality compression */
-	case 0x02EA:	/* 160x120, best frame rate compression */
-		/* Do nothing with this - not supported */
-		err("Unsupported mode $%04lx", frame->header);
-		return scan_NextFrame;
-	default:
-		/* Catch unknown headers, may help in learning new headers */
-		err("Strange frame->header=$%08lx", frame->header);
-		return scan_NextFrame;
-	}
-
-	/*
-	 * Make sure that our writing into output buffer
-	 * will not exceed the buffer. Note that we may write
-	 * not into current output scanline but in several after
-	 * it as well (if we enlarge image vertically.)
-	 */
-	if ((frame->curline + 1) >= data_h) {
-		if (uvd->debug >= 3)
-			dev_info(&uvd->dev->dev,
-				 "Reached line %d. (frame is done)\n",
-				 frame->curline);
-		return scan_NextFrame;
-	}
-
-	/* Make sure that lineBuffer can store two lines of data */
-	len = 3 * data_w; /* <y-data> <uyvy-data> */
-	assert(len <= sizeof(lineBuffer));
-
-	/* Make sure there's enough data for two lines */
-	if (RingQueue_GetLength(&uvd->dp) < len)
-		return scan_Out;
-
-	/* Suck two lines of data out of the ring queue */
-	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
-
-	data = lineBuffer;
-	color = data + data_w;		/* Point to where color planes begin */
-
-	/* Bottom-to-top scanning */
-	rw = (int)VIDEOSIZE_Y(frame->request) - (int)(frame->curline) - 1;
-	RESTRICT_TO_RANGE(rw, 0, VIDEOSIZE_Y(frame->request)-1);
-
-	/* Iterate over two lines. */
-	for (line = 0; line < 2; line++) {
-		for (i = 0; i < VIDEOSIZE_X(frame->request); i++) {
-			int y;
-			int rv, gv, bv;	/* RGB components */
-
-			if (i >= data_w) {
-				RGB24_PUTPIXEL(frame, i, rw, 0, 0, 0);
-				continue;
-			}
-
-			/* first line is YYY...Y; second is UYVY...UYVY */
-			y = data[(line == 0) ? i : (i*2 + 1)];
-
-			/* Apply static color correction */
-			u = color[(i/2)*4] + hue_corr;
-			v = color[(i/2)*4 + 2] + hue2_corr;
-
-			/* Apply color correction */
-			if (color_corr != 0) {
-				/* Magnify up to 2 times, reduce down to zero saturation */
-				u = 128 + ((ccm + color_corr) * (u - 128)) / ccm;
-				v = 128 + ((ccm + color_corr) * (v - 128)) / ccm;
-			}
-
-
-			YUV_TO_RGB_BY_THE_BOOK(y, u, v, rv, gv, bv);
-			RGB24_PUTPIXEL(frame, i, rw, rv, gv, bv);  /* No deinterlacing */
-		}
-
-		/* Check for the end of requested data */
-		if (rw == 0)
-			break;
-
-		/* Prepare for the second line */
-		rw--;
-		data = lineBuffer + data_w;
-	}
-	frame->deinterlace = Deinterlace_None;
-
-	/*
-	 * Account for number of bytes that we wrote into output V4L frame.
-	 * We do it here, after we are done with the scanline, because we
-	 * may fill more than one output scanline if we do vertical
-	 * enlargement.
-	 */
-	frame->curline += 2;
-	*pcopylen += 2 * v4l_linesize;
-
-	if (frame->curline >= VIDEOSIZE_Y(frame->request)) {
-		if (uvd->debug >= 3) {
-			dev_info(&uvd->dev->dev,
-				 "All requested lines (%ld.) done.\n",
-				 VIDEOSIZE_Y(frame->request));
-		}
-		return scan_NextFrame;
-	} else
-		return scan_Continue;
-}
-
-/*
- * ibmcam_model4_128x96_parse_lines()
- *
- * This decoder is for one strange data format that is produced by Model 4
- * camera only in 128x96 mode. This is RGB format and here is its description.
- * First of all, this is non-interlaced stream, meaning that all scan lines
- * are present in the datastream. There are 96 consecutive blocks of data
- * that describe all 96 lines of the image. Each block is 5*128 bytes long
- * and carries R, G, B components. The format of the block is shown in the
- * code below. First 128*2 bytes are interleaved R and G components. Then
- * we have a gap (junk data) 64 bytes long. Then follow B and something
- * else, also interleaved (this makes another 128*2 bytes). After that
- * probably another 64 bytes of junk follow.
- *
- * History:
- * 10-Feb-2001 Created.
- */
-static enum ParseState ibmcam_model4_128x96_parse_lines(
-	struct uvd *uvd,
-	struct usbvideo_frame *frame,
-	long *pcopylen)
-{
-	const unsigned char *data_rv, *data_gv, *data_bv;
-	unsigned int len;
-	int i, v4l_linesize; /* V4L line offset */
-	const int data_w=128, data_h=96;
-	static unsigned char lineBuffer[128*5];
-
-	v4l_linesize = VIDEOSIZE_X(frame->request) * V4L_BYTES_PER_PIXEL;
-
-	/*
-	 * Make sure that our writing into output buffer
-	 * will not exceed the buffer. Note that we may write
-	 * not into current output scanline but in several after
-	 * it as well (if we enlarge image vertically.)
-	 */
-	if ((frame->curline + 1) >= data_h) {
-		if (uvd->debug >= 3)
-			dev_info(&uvd->dev->dev,
-				 "Reached line %d. (frame is done)\n",
-				 frame->curline);
-		return scan_NextFrame;
-	}
-
-	/*
-	 * RGRGRG .... RGRG_____________B?B?B? ... B?B?____________
-	 * <---- 128*2 ---><---- 64 ---><--- 128*2 ---><--- 64 --->
-	 */
-
-	/* Make sure there's enough data for the entire line */
-	len = 5 * data_w;
-	assert(len <= sizeof(lineBuffer));
-
-	/* Make sure there's enough data for the entire line */
-	if (RingQueue_GetLength(&uvd->dp) < len)
-		return scan_Out;
-
-	/* Suck one line out of the ring queue */
-	RingQueue_Dequeue(&uvd->dp, lineBuffer, len);
-
-	data_rv = lineBuffer;
-	data_gv = lineBuffer + 1;
-	data_bv = lineBuffer + data_w*2 + data_w/2;
-	for (i = 0; i < VIDEOSIZE_X(frame->request); i++) {
-		int rv, gv, bv;	/* RGB components */
-		if (i < data_w) {
-			const int j = i * 2;
-			gv = data_rv[j];
-			rv = data_gv[j];
-			bv = data_bv[j];
-			if (flags & FLAGS_MONOCHROME) {
-				unsigned long y;
-				y = rv + gv + bv;
-				y /= 3;
-				if (y > 0xFF)
-					y = 0xFF;
-				rv = gv = bv = (unsigned char) y;
-			}
-		} else {
-			rv = gv = bv = 0;
-		}
-		RGB24_PUTPIXEL(frame, i, frame->curline, rv, gv, bv);
-	}
-	frame->deinterlace = Deinterlace_None;
-	frame->curline++;
-	*pcopylen += v4l_linesize;
-
-	if (frame->curline >= VIDEOSIZE_Y(frame->request)) {
-		if (uvd->debug >= 3) {
-			dev_info(&uvd->dev->dev,
-				 "All requested lines (%ld.) done.\n",
-				 VIDEOSIZE_Y(frame->request));
-		}
-		return scan_NextFrame;
-	} else
-		return scan_Continue;
-}
-
-/*
- * ibmcam_ProcessIsocData()
- *
- * Generic routine to parse the ring queue data. It employs either
- * ibmcam_find_header() or ibmcam_parse_lines() to do most
- * of work.
- *
- * History:
- * 1/21/00  Created.
- */
-static void ibmcam_ProcessIsocData(struct uvd *uvd,
-				   struct usbvideo_frame *frame)
-{
-	enum ParseState newstate;
-	long copylen = 0;
-	int mod = IBMCAM_T(uvd)->camera_model;
-
-	while (1) {
-		newstate = scan_Out;
-		if (RingQueue_GetLength(&uvd->dp) > 0) {
-			if (frame->scanstate == ScanState_Scanning) {
-				newstate = ibmcam_find_header(uvd);
-			} else if (frame->scanstate == ScanState_Lines) {
-				if ((mod == IBMCAM_MODEL_2) &&
-				    ((uvd->videosize == VIDEOSIZE_352x288) ||
-				     (uvd->videosize == VIDEOSIZE_320x240) ||
-				     (uvd->videosize == VIDEOSIZE_352x240)))
-				{
-					newstate = ibmcam_model2_320x240_parse_lines(
-						uvd, frame, &copylen);
-				} else if (mod == IBMCAM_MODEL_4) {
-					/*
-					 * Model 4 cameras (IBM NetCamera) use Model 2 decoder (RGB)
-					 * for 320x240 and above; 160x120 and 176x144 uses Model 1
-					 * decoder (YUV), and 128x96 mode uses ???
-					 */
-					if ((uvd->videosize == VIDEOSIZE_352x288) ||
-					    (uvd->videosize == VIDEOSIZE_320x240) ||
-					    (uvd->videosize == VIDEOSIZE_352x240))
-					{
-						newstate = ibmcam_model2_320x240_parse_lines(uvd, frame, &copylen);
-					} else if (uvd->videosize == VIDEOSIZE_128x96) {
-						newstate = ibmcam_model4_128x96_parse_lines(uvd, frame, &copylen);
-					} else {
-						newstate = ibmcam_parse_lines(uvd, frame, &copylen);
-					}
-				} else if (mod == IBMCAM_MODEL_3) {
-					newstate = ibmcam_model3_parse_lines(uvd, frame, &copylen);
-				} else {
-					newstate = ibmcam_parse_lines(uvd, frame, &copylen);
-				}
-			}
-		}
-		if (newstate == scan_Continue)
-			continue;
-		else if ((newstate == scan_NextFrame) || (newstate == scan_Out))
-			break;
-		else
-			return; /* scan_EndParse */
-	}
-
-	if (newstate == scan_NextFrame) {
-		frame->frameState = FrameState_Done;
-		uvd->curframe = -1;
-		uvd->stats.frame_num++;
-		if ((mod == IBMCAM_MODEL_2) || (mod == IBMCAM_MODEL_4)) {
-			/* Need software contrast adjustment for those cameras */
-			frame->flags |= USBVIDEO_FRAME_FLAG_SOFTWARE_CONTRAST;
-		}
-	}
-
-	/* Update the frame's uncompressed length. */
-	frame->seqRead_Length += copylen;
-
-#if 0
-	{
-		static unsigned char j=0;
-		memset(frame->data, j++, uvd->max_frame_size);
-		frame->frameState = FrameState_Ready;
-	}
-#endif
-}
-
-/*
- * ibmcam_veio()
- *
- * History:
- * 1/27/00  Added check for dev == NULL; this happens if camera is unplugged.
- */
-static int ibmcam_veio(
-	struct uvd *uvd,
-	unsigned char req,
-	unsigned short value,
-	unsigned short index)
-{
-	static const char proc[] = "ibmcam_veio";
-	unsigned char cp[8] /* = { 0xde, 0xad, 0xbe, 0xef, 0xde, 0xad, 0xbe, 0xef } */;
-	int i;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return 0;
-
-	if (req == 1) {
-		i = usb_control_msg(
-			uvd->dev,
-			usb_rcvctrlpipe(uvd->dev, 0),
-			req,
-			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
-			value,
-			index,
-			cp,
-			sizeof(cp),
-			1000);
-#if 0
-		dev_info(&uvd->dev->dev,
-			 "USB => %02x%02x%02x%02x%02x%02x%02x%02x "
-			 "(req=$%02x val=$%04x ind=$%04x)\n",
-			 cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7],
-			 req, value, index);
-#endif
-	} else {
-		i = usb_control_msg(
-			uvd->dev,
-			usb_sndctrlpipe(uvd->dev, 0),
-			req,
-			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
-			value,
-			index,
-			NULL,
-			0,
-			1000);
-	}
-	if (i < 0) {
-		err("%s: ERROR=%d. Camera stopped; Reconnect or reload driver.",
-		    proc, i);
-		uvd->last_error = i;
-	}
-	return i;
-}
-
-/*
- * ibmcam_calculate_fps()
- *
- * This procedure roughly calculates the real frame rate based
- * on FPS code (framerate=NNN option). Actual FPS differs
- * slightly depending on lighting conditions, so that actual frame
- * rate is determined by the camera. Since I don't know how to ask
- * the camera what FPS is now I have to use the FPS code instead.
- *
- * The FPS code is in range [0..6], 0 is slowest, 6 is fastest.
- * Corresponding real FPS should be in range [3..30] frames per second.
- * The conversion formula is obvious:
- *
- * real_fps = 3 + (fps_code * 4.5)
- *
- * History:
- * 1/18/00  Created.
- */
-static int ibmcam_calculate_fps(struct uvd *uvd)
-{
-	return 3 + framerate*4 + framerate/2;
-}
-
-/*
- * ibmcam_send_FF_04_02()
- *
- * This procedure sends magic 3-command prefix to the camera.
- * The purpose of this prefix is not known.
- *
- * History:
- * 1/2/00   Created.
- */
-static void ibmcam_send_FF_04_02(struct uvd *uvd)
-{
-	ibmcam_veio(uvd, 0, 0x00FF, 0x0127);
-	ibmcam_veio(uvd, 0, 0x0004, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
-}
-
-static void ibmcam_send_00_04_06(struct uvd *uvd)
-{
-	ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-	ibmcam_veio(uvd, 0, 0x0004, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0006, 0x0124);
-}
-
-static void ibmcam_send_x_00(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_veio(uvd, 0, x,      0x0127);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
-}
-
-static void ibmcam_send_x_00_05(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_send_x_00(uvd, x);
-	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
-}
-
-static void ibmcam_send_x_00_05_02(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_veio(uvd, 0, x,      0x0127);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
-}
-
-static void ibmcam_send_x_01_00_05(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_veio(uvd, 0, x,      0x0127);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
-}
-
-static void ibmcam_send_x_00_05_02_01(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_veio(uvd, 0, x,      0x0127);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0124);
-}
-
-static void ibmcam_send_x_00_05_02_08_01(struct uvd *uvd, unsigned short x)
-{
-	ibmcam_veio(uvd, 0, x,      0x0127);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0005, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0008, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0124);
-}
-
-static void ibmcam_Packet_Format1(struct uvd *uvd, unsigned char fkey, unsigned char val)
-{
-	ibmcam_send_x_01_00_05(uvd, unknown_88);
-	ibmcam_send_x_00_05(uvd, fkey);
-	ibmcam_send_x_00_05_02_08_01(uvd, val);
-	ibmcam_send_x_00_05(uvd, unknown_88);
-	ibmcam_send_x_00_05_02_01(uvd, fkey);
-	ibmcam_send_x_00_05(uvd, unknown_89);
-	ibmcam_send_x_00(uvd, fkey);
-	ibmcam_send_00_04_06(uvd);
-	ibmcam_veio(uvd, 1, 0x0000, 0x0126);
-	ibmcam_send_FF_04_02(uvd);
-}
-
-static void ibmcam_PacketFormat2(struct uvd *uvd, unsigned char fkey, unsigned char val)
-{
-	ibmcam_send_x_01_00_05	(uvd, unknown_88);
-	ibmcam_send_x_00_05	(uvd, fkey);
-	ibmcam_send_x_00_05_02	(uvd, val);
-}
-
-static void ibmcam_model2_Packet2(struct uvd *uvd)
-{
-	ibmcam_veio(uvd, 0, 0x00ff, 0x012d);
-	ibmcam_veio(uvd, 0, 0xfea3, 0x0124);
-}
-
-static void ibmcam_model2_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2)
-{
-	ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-	ibmcam_veio(uvd, 0, 0x00ff, 0x012e);
-	ibmcam_veio(uvd, 0, v1,     0x012f);
-	ibmcam_veio(uvd, 0, 0x00ff, 0x0130);
-	ibmcam_veio(uvd, 0, 0xc719, 0x0124);
-	ibmcam_veio(uvd, 0, v2,     0x0127);
-
-	ibmcam_model2_Packet2(uvd);
-}
-
-/*
- * ibmcam_model3_Packet1()
- *
- * 00_0078_012d
- * 00_0097_012f
- * 00_d141_0124
- * 00_0096_0127
- * 00_fea8_0124
-*/
-static void ibmcam_model3_Packet1(struct uvd *uvd, unsigned short v1, unsigned short v2)
-{
-	ibmcam_veio(uvd, 0, 0x0078, 0x012d);
-	ibmcam_veio(uvd, 0, v1,     0x012f);
-	ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-	ibmcam_veio(uvd, 0, v2,     0x0127);
-	ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-}
-
-static void ibmcam_model4_BrightnessPacket(struct uvd *uvd, int i)
-{
-	ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-	ibmcam_veio(uvd, 0, 0x0026, 0x012f);
-	ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-	ibmcam_veio(uvd, 0, i,      0x0127);
-	ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-	ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-	ibmcam_veio(uvd, 0, 0x0038, 0x012d);
-	ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-	ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-	ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-}
-
-/*
- * ibmcam_adjust_contrast()
- *
- * The contrast value changes from 0 (high contrast) to 15 (low contrast).
- * This is in reverse to usual order of things (such as TV controls), so
- * we reverse it again here.
- *
- * TODO: we probably don't need to send the setup 5 times...
- *
- * History:
- * 1/2/00   Created.
- */
-static void ibmcam_adjust_contrast(struct uvd *uvd)
-{
-	unsigned char a_contrast = uvd->vpic.contrast >> 12;
-	unsigned char new_contrast;
-
-	if (a_contrast >= 16)
-		a_contrast = 15;
-	new_contrast = 15 - a_contrast;
-	if (new_contrast == uvd->vpic_old.contrast)
-		return;
-	uvd->vpic_old.contrast = new_contrast;
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-	{
-		const int ntries = 5;
-		int i;
-		for (i=0; i < ntries; i++) {
-			ibmcam_Packet_Format1(uvd, contrast_14, new_contrast);
-			ibmcam_send_FF_04_02(uvd);
-		}
-		break;
-	}
-	case IBMCAM_MODEL_2:
-	case IBMCAM_MODEL_4:
-		/* Models 2, 4 do not have this control; implemented in software. */
-		break;
-	case IBMCAM_MODEL_3:
-	{	/* Preset hardware values */
-		static const struct {
-			unsigned short cv1;
-			unsigned short cv2;
-			unsigned short cv3;
-		} cv[7] = {
-			{ 0x05, 0x05, 0x0f },	/* Minimum */
-			{ 0x04, 0x04, 0x16 },
-			{ 0x02, 0x03, 0x16 },
-			{ 0x02, 0x08, 0x16 },
-			{ 0x01, 0x0c, 0x16 },
-			{ 0x01, 0x0e, 0x16 },
-			{ 0x01, 0x10, 0x16 }	/* Maximum */
-		};
-		int i = a_contrast / 2;
-		RESTRICT_TO_RANGE(i, 0, 6);
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
-		ibmcam_model3_Packet1(uvd, 0x0067, cv[i].cv1);
-		ibmcam_model3_Packet1(uvd, 0x005b, cv[i].cv2);
-		ibmcam_model3_Packet1(uvd, 0x005c, cv[i].cv3);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
-		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-		break;
-	}
-	default:
-		break;
-	}
-}
-
-/*
- * ibmcam_change_lighting_conditions()
- *
- * Camera model 1:
- * We have 3 levels of lighting conditions: 0=Bright, 1=Medium, 2=Low.
- *
- * Camera model 2:
- * We have 16 levels of lighting, 0 for bright light and up to 15 for
- * low light. But values above 5 or so are useless because camera is
- * not really capable to produce anything worth viewing at such light.
- * This setting may be altered only in certain camera state.
- *
- * Low lighting forces slower FPS. Lighting is set as a module parameter.
- *
- * History:
- * 1/5/00   Created.
- * 2/20/00  Added support for Model 2 cameras.
- */
-static void ibmcam_change_lighting_conditions(struct uvd *uvd)
-{
-	if (debug > 0)
-		dev_info(&uvd->dev->dev,
-			 "%s: Set lighting to %hu.\n", __func__, lighting);
-
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-	{
-		const int ntries = 5;
-		int i;
-		for (i=0; i < ntries; i++)
-			ibmcam_Packet_Format1(uvd, light_27, (unsigned short) lighting);
-		break;
-	}
-	case IBMCAM_MODEL_2:
-#if 0
-		/*
-		 * This command apparently requires camera to be stopped. My
-		 * experiments showed that it -is- possible to alter the lighting
-		 * conditions setting "on the fly", but why bother? This setting does
-		 * not work reliably in all cases, so I decided simply to leave the
-		 * setting where Xirlink put it - in the camera setup phase. This code
-		 * is commented out because it does not work at -any- moment, so its
-		 * presence makes no sense. You may use it for experiments.
-		 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop camera */
-		ibmcam_model2_Packet1(uvd, mod2_sensitivity, lighting);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Start camera */
-#endif
-		break;
-	case IBMCAM_MODEL_3:
-	case IBMCAM_MODEL_4:
-	default:
-		break;
-	}
-}
-
-/*
- * ibmcam_set_sharpness()
- *
- * Cameras model 1 have internal smoothing feature. It is controlled by value in
- * range [0..6], where 0 is most smooth and 6 is most sharp (raw image, I guess).
- * Recommended value is 4. Cameras model 2 do not have this feature at all.
- */
-static void ibmcam_set_sharpness(struct uvd *uvd)
-{
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-	{
-		static const unsigned short sa[] = { 0x11, 0x13, 0x16, 0x18, 0x1a, 0x8, 0x0a };
-		unsigned short i, sv;
-
-		RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX);
-		if (debug > 0)
-			dev_info(&uvd->dev->dev, "%s: Set sharpness to %hu.\n",
-				 __func__, sharpness);
-
-		sv = sa[sharpness - SHARPNESS_MIN];
-		for (i=0; i < 2; i++) {
-			ibmcam_send_x_01_00_05	(uvd, unknown_88);
-			ibmcam_send_x_00_05		(uvd, sharp_13);
-			ibmcam_send_x_00_05_02	(uvd, sv);
-		}
-		break;
-	}
-	case IBMCAM_MODEL_2:
-	case IBMCAM_MODEL_4:
-		/* Models 2, 4 do not have this control */
-		break;
-	case IBMCAM_MODEL_3:
-	{	/*
-		 * "Use a table of magic numbers.
-		 *  This setting doesn't really change much.
-		 *  But that's how Windows does it."
-		 */
-		static const struct {
-			unsigned short sv1;
-			unsigned short sv2;
-			unsigned short sv3;
-			unsigned short sv4;
-		} sv[7] = {
-			{ 0x00, 0x00, 0x05, 0x14 },	/* Smoothest */
-			{ 0x01, 0x04, 0x05, 0x14 },
-			{ 0x02, 0x04, 0x05, 0x14 },
-			{ 0x03, 0x04, 0x05, 0x14 },
-			{ 0x03, 0x05, 0x05, 0x14 },
-			{ 0x03, 0x06, 0x05, 0x14 },
-			{ 0x03, 0x07, 0x05, 0x14 }	/* Sharpest */
-		};
-		RESTRICT_TO_RANGE(sharpness, SHARPNESS_MIN, SHARPNESS_MAX);
-		RESTRICT_TO_RANGE(sharpness, 0, 6);
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
-		ibmcam_model3_Packet1(uvd, 0x0060, sv[sharpness].sv1);
-		ibmcam_model3_Packet1(uvd, 0x0061, sv[sharpness].sv2);
-		ibmcam_model3_Packet1(uvd, 0x0062, sv[sharpness].sv3);
-		ibmcam_model3_Packet1(uvd, 0x0063, sv[sharpness].sv4);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
-		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-		ibmcam_veio(uvd, 0, 0x0001, 0x0113);
-		break;
-	}
-	default:
-		break;
-	}
-}
-
-/*
- * ibmcam_set_brightness()
- *
- * This procedure changes brightness of the picture.
- */
-static void ibmcam_set_brightness(struct uvd *uvd)
-{
-	static const unsigned short n = 1;
-
-	if (debug > 0)
-		dev_info(&uvd->dev->dev, "%s: Set brightness to %hu.\n",
-			 __func__, uvd->vpic.brightness);
-
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-	{
-		unsigned short i, j, bv[3];
-		bv[0] = bv[1] = bv[2] = uvd->vpic.brightness >> 10;
-		if (bv[0] == (uvd->vpic_old.brightness >> 10))
-			return;
-		uvd->vpic_old.brightness = bv[0];
-		for (j=0; j < 3; j++)
-			for (i=0; i < n; i++)
-				ibmcam_Packet_Format1(uvd, bright_3x[j], bv[j]);
-		break;
-	}
-	case IBMCAM_MODEL_2:
-	{
-		unsigned short i, j;
-		i = uvd->vpic.brightness >> 12;	/* 0 .. 15 */
-		j = 0x60 + i * ((0xee - 0x60) / 16);	/* 0x60 .. 0xee or so */
-		if (uvd->vpic_old.brightness == j)
-			break;
-		uvd->vpic_old.brightness = j;
-		ibmcam_model2_Packet1(uvd, mod2_brightness, j);
-		break;
-	}
-	case IBMCAM_MODEL_3:
-	{
-		/* Model 3: Brightness range 'i' in [0x0C..0x3F] */
-		unsigned short i =
-			0x0C + (uvd->vpic.brightness / (0xFFFF / (0x3F - 0x0C + 1)));
-		RESTRICT_TO_RANGE(i, 0x0C, 0x3F);
-		if (uvd->vpic_old.brightness == i)
-			break;
-		uvd->vpic_old.brightness = i;
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
-		ibmcam_model3_Packet1(uvd, 0x0036, i);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
-		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-		ibmcam_veio(uvd, 0, 0x0001, 0x0113);
-		break;
-	}
-	case IBMCAM_MODEL_4:
-	{
-		/* Model 4: Brightness range 'i' in [0x04..0xb4] */
-		unsigned short i = 0x04 + (uvd->vpic.brightness / (0xFFFF / (0xb4 - 0x04 + 1)));
-		RESTRICT_TO_RANGE(i, 0x04, 0xb4);
-		if (uvd->vpic_old.brightness == i)
-			break;
-		uvd->vpic_old.brightness = i;
-		ibmcam_model4_BrightnessPacket(uvd, i);
-		break;
-	}
-	default:
-		break;
-	}
-}
-
-static void ibmcam_set_hue(struct uvd *uvd)
-{
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_2:
-	{
-		unsigned short hue = uvd->vpic.hue >> 9; /* 0 .. 7F */
-		if (uvd->vpic_old.hue == hue)
-			return;
-		uvd->vpic_old.hue = hue;
-		ibmcam_model2_Packet1(uvd, mod2_hue, hue);
-		/* ibmcam_model2_Packet1(uvd, mod2_saturation, sat); */
-		break;
-	}
-	case IBMCAM_MODEL_3:
-	{
-#if 0 /* This seems not to work. No problem, will fix programmatically */
-		unsigned short hue = 0x05 + (uvd->vpic.hue / (0xFFFF / (0x37 - 0x05 + 1)));
-		RESTRICT_TO_RANGE(hue, 0x05, 0x37);
-		if (uvd->vpic_old.hue == hue)
-			return;
-		uvd->vpic_old.hue = hue;
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop */
-		ibmcam_model3_Packet1(uvd, 0x007e, hue);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go! */
-		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-		ibmcam_veio(uvd, 0, 0x0001, 0x0113);
-#endif
-		break;
-	}
-	case IBMCAM_MODEL_4:
-	{
-		unsigned short r_gain, g_gain, b_gain, hue;
-
-		/*
-		 * I am not sure r/g/b_gain variables exactly control gain
-		 * of those channels. Most likely they subtly change some
-		 * very internal image processing settings in the camera.
-		 * In any case, here is what they do, and feel free to tweak:
-		 *
-		 * r_gain: seriously affects red gain
-		 * g_gain: seriously affects green gain
-		 * b_gain: seriously affects blue gain
-		 * hue: changes average color from violet (0) to red (0xFF)
-		 *
-		 * These settings are preset for a decent white balance in
-		 * 320x240, 352x288 modes. Low-res modes exhibit higher contrast
-		 * and therefore may need different values here.
-		 */
-		hue = 20 + (uvd->vpic.hue >> 9);
-		switch (uvd->videosize) {
-		case VIDEOSIZE_128x96:
-			r_gain = 90;
-			g_gain = 166;
-			b_gain = 175;
-			break;
-		case VIDEOSIZE_160x120:
-			r_gain = 70;
-			g_gain = 166;
-			b_gain = 185;
-			break;
-		case VIDEOSIZE_176x144:
-			r_gain = 160;
-			g_gain = 175;
-			b_gain = 185;
-			break;
-		default:
-			r_gain = 120;
-			g_gain = 166;
-			b_gain = 175;
-			break;
-		}
-		RESTRICT_TO_RANGE(hue, 1, 0x7f);
-
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, g_gain, 0x0127);	/* Green gain */
-		ibmcam_veio(uvd, 0, r_gain, 0x012e);	/* Red gain */
-		ibmcam_veio(uvd, 0, b_gain, 0x0130);	/* Blue gain */
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, hue,    0x012d);	/* Hue */
-		ibmcam_veio(uvd, 0, 0xf545, 0x0124);
-		break;
-	}
-	default:
-		break;
-	}
-}
-
-/*
- * ibmcam_adjust_picture()
- *
- * This procedure gets called from V4L interface to update picture settings.
- * Here we change brightness and contrast.
- */
-static void ibmcam_adjust_picture(struct uvd *uvd)
-{
-	ibmcam_adjust_contrast(uvd);
-	ibmcam_set_brightness(uvd);
-	ibmcam_set_hue(uvd);
-}
-
-static int ibmcam_model1_setup(struct uvd *uvd)
-{
-	const int ntries = 5;
-	int i;
-
-	ibmcam_veio(uvd, 1, 0x00, 0x0128);
-	ibmcam_veio(uvd, 1, 0x00, 0x0100);
-	ibmcam_veio(uvd, 0, 0x01, 0x0100);	/* LED On  */
-	ibmcam_veio(uvd, 1, 0x00, 0x0100);
-	ibmcam_veio(uvd, 0, 0x81, 0x0100);	/* LED Off */
-	ibmcam_veio(uvd, 1, 0x00, 0x0100);
-	ibmcam_veio(uvd, 0, 0x01, 0x0100);	/* LED On  */
-	ibmcam_veio(uvd, 0, 0x01, 0x0108);
-
-	ibmcam_veio(uvd, 0, 0x03, 0x0112);
-	ibmcam_veio(uvd, 1, 0x00, 0x0115);
-	ibmcam_veio(uvd, 0, 0x06, 0x0115);
-	ibmcam_veio(uvd, 1, 0x00, 0x0116);
-	ibmcam_veio(uvd, 0, 0x44, 0x0116);
-	ibmcam_veio(uvd, 1, 0x00, 0x0116);
-	ibmcam_veio(uvd, 0, 0x40, 0x0116);
-	ibmcam_veio(uvd, 1, 0x00, 0x0115);
-	ibmcam_veio(uvd, 0, 0x0e, 0x0115);
-	ibmcam_veio(uvd, 0, 0x19, 0x012c);
-
-	ibmcam_Packet_Format1(uvd, 0x00, 0x1e);
-	ibmcam_Packet_Format1(uvd, 0x39, 0x0d);
-	ibmcam_Packet_Format1(uvd, 0x39, 0x09);
-	ibmcam_Packet_Format1(uvd, 0x3b, 0x00);
-	ibmcam_Packet_Format1(uvd, 0x28, 0x22);
-	ibmcam_Packet_Format1(uvd, light_27, 0);
-	ibmcam_Packet_Format1(uvd, 0x2b, 0x1f);
-	ibmcam_Packet_Format1(uvd, 0x39, 0x08);
-
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x2c, 0x00);
-
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x30, 0x14);
-
-	ibmcam_PacketFormat2(uvd, 0x39, 0x02);
-	ibmcam_PacketFormat2(uvd, 0x01, 0xe1);
-	ibmcam_PacketFormat2(uvd, 0x02, 0xcd);
-	ibmcam_PacketFormat2(uvd, 0x03, 0xcd);
-	ibmcam_PacketFormat2(uvd, 0x04, 0xfa);
-	ibmcam_PacketFormat2(uvd, 0x3f, 0xff);
-	ibmcam_PacketFormat2(uvd, 0x39, 0x00);
-
-	ibmcam_PacketFormat2(uvd, 0x39, 0x02);
-	ibmcam_PacketFormat2(uvd, 0x0a, 0x37);
-	ibmcam_PacketFormat2(uvd, 0x0b, 0xb8);
-	ibmcam_PacketFormat2(uvd, 0x0c, 0xf3);
-	ibmcam_PacketFormat2(uvd, 0x0d, 0xe3);
-	ibmcam_PacketFormat2(uvd, 0x0e, 0x0d);
-	ibmcam_PacketFormat2(uvd, 0x0f, 0xf2);
-	ibmcam_PacketFormat2(uvd, 0x10, 0xd5);
-	ibmcam_PacketFormat2(uvd, 0x11, 0xba);
-	ibmcam_PacketFormat2(uvd, 0x12, 0x53);
-	ibmcam_PacketFormat2(uvd, 0x3f, 0xff);
-	ibmcam_PacketFormat2(uvd, 0x39, 0x00);
-
-	ibmcam_PacketFormat2(uvd, 0x39, 0x02);
-	ibmcam_PacketFormat2(uvd, 0x16, 0x00);
-	ibmcam_PacketFormat2(uvd, 0x17, 0x28);
-	ibmcam_PacketFormat2(uvd, 0x18, 0x7d);
-	ibmcam_PacketFormat2(uvd, 0x19, 0xbe);
-	ibmcam_PacketFormat2(uvd, 0x3f, 0xff);
-	ibmcam_PacketFormat2(uvd, 0x39, 0x00);
-
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x00, 0x18);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x13, 0x18);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x14, 0x06);
-
-	/* This is default brightness */
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x31, 0x37);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x32, 0x46);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x33, 0x55);
-
-	ibmcam_Packet_Format1(uvd, 0x2e, 0x04);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x2d, 0x04);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x29, 0x80);
-	ibmcam_Packet_Format1(uvd, 0x2c, 0x01);
-	ibmcam_Packet_Format1(uvd, 0x30, 0x17);
-	ibmcam_Packet_Format1(uvd, 0x39, 0x08);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x34, 0x00);
-
-	ibmcam_veio(uvd, 0, 0x00, 0x0101);
-	ibmcam_veio(uvd, 0, 0x00, 0x010a);
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_128x96:
-		ibmcam_veio(uvd, 0, 0x80, 0x0103);
-		ibmcam_veio(uvd, 0, 0x60, 0x0105);
-		ibmcam_veio(uvd, 0, 0x0c, 0x010b);
-		ibmcam_veio(uvd, 0, 0x04, 0x011b);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x0b, 0x011d);
-		ibmcam_veio(uvd, 0, 0x00, 0x011e);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x00, 0x0129);
-		break;
-	case VIDEOSIZE_176x144:
-		ibmcam_veio(uvd, 0, 0xb0, 0x0103);
-		ibmcam_veio(uvd, 0, 0x8f, 0x0105);
-		ibmcam_veio(uvd, 0, 0x06, 0x010b);
-		ibmcam_veio(uvd, 0, 0x04, 0x011b);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x0d, 0x011d);
-		ibmcam_veio(uvd, 0, 0x00, 0x011e);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x03, 0x0129);
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_veio(uvd, 0, 0xb0, 0x0103);
-		ibmcam_veio(uvd, 0, 0x90, 0x0105);
-		ibmcam_veio(uvd, 0, 0x02, 0x010b);
-		ibmcam_veio(uvd, 0, 0x04, 0x011b);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x05, 0x011d);
-		ibmcam_veio(uvd, 0, 0x00, 0x011e);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x00, 0x0129);
-		break;
-	}
-
-	ibmcam_veio(uvd, 0, 0xff, 0x012b);
-
-	/* This is another brightness - don't know why */
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x31, 0xc3);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x32, 0xd2);
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, 0x33, 0xe1);
-
-	/* Default contrast */
-	for (i=0; i < ntries; i++)
-		ibmcam_Packet_Format1(uvd, contrast_14, 0x0a);
-
-	/* Default sharpness */
-	for (i=0; i < 2; i++)
-		ibmcam_PacketFormat2(uvd, sharp_13, 0x1a);	/* Level 4 FIXME */
-
-	/* Default lighting conditions */
-	ibmcam_Packet_Format1(uvd, light_27, lighting); /* 0=Bright 2=Low */
-
-	/* Assorted init */
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_128x96:
-		ibmcam_Packet_Format1(uvd, 0x2b, 0x1e);
-		ibmcam_veio(uvd, 0, 0xc9, 0x0119);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x80, 0x0109);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x36, 0x0102);
-		ibmcam_veio(uvd, 0, 0x1a, 0x0104);
-		ibmcam_veio(uvd, 0, 0x04, 0x011a);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x2b, 0x011c);
-		ibmcam_veio(uvd, 0, 0x23, 0x012a);	/* Same everywhere */
-#if 0
-		ibmcam_veio(uvd, 0, 0x00, 0x0106);
-		ibmcam_veio(uvd, 0, 0x38, 0x0107);
-#else
-		ibmcam_veio(uvd, 0, 0x02, 0x0106);
-		ibmcam_veio(uvd, 0, 0x2a, 0x0107);
-#endif
-		break;
-	case VIDEOSIZE_176x144:
-		ibmcam_Packet_Format1(uvd, 0x2b, 0x1e);
-		ibmcam_veio(uvd, 0, 0xc9, 0x0119);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x80, 0x0109);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x04, 0x0102);
-		ibmcam_veio(uvd, 0, 0x02, 0x0104);
-		ibmcam_veio(uvd, 0, 0x04, 0x011a);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x2b, 0x011c);
-		ibmcam_veio(uvd, 0, 0x23, 0x012a);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x01, 0x0106);
-		ibmcam_veio(uvd, 0, 0xca, 0x0107);
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_Packet_Format1(uvd, 0x2b, 0x1f);
-		ibmcam_veio(uvd, 0, 0xc9, 0x0119);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x80, 0x0109);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x08, 0x0102);
-		ibmcam_veio(uvd, 0, 0x01, 0x0104);
-		ibmcam_veio(uvd, 0, 0x04, 0x011a);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x2f, 0x011c);
-		ibmcam_veio(uvd, 0, 0x23, 0x012a);	/* Same everywhere */
-		ibmcam_veio(uvd, 0, 0x03, 0x0106);
-		ibmcam_veio(uvd, 0, 0xf6, 0x0107);
-		break;
-	}
-	return (CAMERA_IS_OPERATIONAL(uvd) ? 0 : -EFAULT);
-}
-
-static int ibmcam_model2_setup(struct uvd *uvd)
-{
-	ibmcam_veio(uvd, 0, 0x0000, 0x0100);	/* LED on */
-	ibmcam_veio(uvd, 1, 0x0000, 0x0116);
-	ibmcam_veio(uvd, 0, 0x0060, 0x0116);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0112);
-	ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-	ibmcam_veio(uvd, 0, 0x0008, 0x012b);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-	switch (uvd->videosize) {
-	case VIDEOSIZE_176x144:
-		ibmcam_veio(uvd, 0, 0x002c, 0x0103);	/* All except 320x240 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
-		ibmcam_veio(uvd, 0, 0x0024, 0x0105);	/* 176x144, 352x288 */
-		ibmcam_veio(uvd, 0, 0x00b9, 0x010a);	/* Unique to this mode */
-		ibmcam_veio(uvd, 0, 0x0038, 0x0119);	/* Unique to this mode */
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
-		ibmcam_veio(uvd, 0, 0x0090, 0x0107);	/* Unique to every mode*/
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_veio(uvd, 0, 0x0028, 0x0103);	/* Unique to this mode */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
-		ibmcam_veio(uvd, 0, 0x001e, 0x0105);	/* 320x240, 352x240 */
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
-		ibmcam_veio(uvd, 0, 0x0098, 0x0107);	/* Unique to every mode*/
-		break;
-	case VIDEOSIZE_352x240:
-		ibmcam_veio(uvd, 0, 0x002c, 0x0103);	/* All except 320x240 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
-		ibmcam_veio(uvd, 0, 0x001e, 0x0105);	/* 320x240, 352x240 */
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
-		ibmcam_veio(uvd, 0, 0x00da, 0x0107);	/* Unique to every mode*/
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_veio(uvd, 0, 0x002c, 0x0103);	/* All except 320x240 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);	/* Same */
-		ibmcam_veio(uvd, 0, 0x0024, 0x0105);	/* 176x144, 352x288 */
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);	/* All except 176x144 */
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);	/* Same */
-		ibmcam_veio(uvd, 0, 0x00fe, 0x0107);	/* Unique to every mode*/
-		break;
-	}
-	return (CAMERA_IS_OPERATIONAL(uvd) ? 0 : -EFAULT);
-}
-
-/*
- * ibmcam_model1_setup_after_video_if()
- *
- * This code adds finishing touches to the video data interface.
- * Here we configure the frame rate and turn on the LED.
- */
-static void ibmcam_model1_setup_after_video_if(struct uvd *uvd)
-{
-	unsigned short internal_frame_rate;
-
-	RESTRICT_TO_RANGE(framerate, FRAMERATE_MIN, FRAMERATE_MAX);
-	internal_frame_rate = FRAMERATE_MAX - framerate; /* 0=Fast 6=Slow */
-	ibmcam_veio(uvd, 0, 0x01, 0x0100);	/* LED On  */
-	ibmcam_veio(uvd, 0, internal_frame_rate, 0x0111);
-	ibmcam_veio(uvd, 0, 0x01, 0x0114);
-	ibmcam_veio(uvd, 0, 0xc0, 0x010c);
-}
-
-static void ibmcam_model2_setup_after_video_if(struct uvd *uvd)
-{
-	unsigned short setup_model2_rg2, setup_model2_sat, setup_model2_yb;
-
-	ibmcam_veio(uvd, 0, 0x0000, 0x0100);	/* LED on */
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_176x144:
-		ibmcam_veio(uvd, 0, 0x0050, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
-		break;
-	case VIDEOSIZE_320x240:
-	case VIDEOSIZE_352x240:
-	case VIDEOSIZE_352x288:
-		ibmcam_veio(uvd, 0, 0x0040, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		break;
-	}
-	ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-	ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-
-	/*
-	 * Hardware settings, may affect CMOS sensor; not user controls!
-	 * -------------------------------------------------------------
-	 * 0x0004: no effect
-	 * 0x0006: hardware effect
-	 * 0x0008: no effect
-	 * 0x000a: stops video stream, probably important h/w setting
-	 * 0x000c: changes color in hardware manner (not user setting)
-	 * 0x0012: changes number of colors (does not affect speed)
-	 * 0x002a: no effect
-	 * 0x002c: hardware setting (related to scan lines)
-	 * 0x002e: stops video stream, probably important h/w setting
-	 */
-	ibmcam_model2_Packet1(uvd, 0x000a, 0x005c);
-	ibmcam_model2_Packet1(uvd, 0x0004, 0x0000);
-	ibmcam_model2_Packet1(uvd, 0x0006, 0x00fb);
-	ibmcam_model2_Packet1(uvd, 0x0008, 0x0000);
-	ibmcam_model2_Packet1(uvd, 0x000c, 0x0009);
-	ibmcam_model2_Packet1(uvd, 0x0012, 0x000a);
-	ibmcam_model2_Packet1(uvd, 0x002a, 0x0000);
-	ibmcam_model2_Packet1(uvd, 0x002c, 0x0000);
-	ibmcam_model2_Packet1(uvd, 0x002e, 0x0008);
-
-	/*
-	 * Function 0x0030 pops up all over the place. Apparently
-	 * it is a hardware control register, with every bit assigned to
-	 * do something.
-	 */
-	ibmcam_model2_Packet1(uvd, 0x0030, 0x0000);
-
-	/*
-	 * Magic control of CMOS sensor. Only lower values like
-	 * 0-3 work, and picture shifts left or right. Don't change.
-	 */
-	switch (uvd->videosize) {
-	case VIDEOSIZE_176x144:
-		ibmcam_model2_Packet1(uvd, 0x0014, 0x0002);
-		ibmcam_model2_Packet1(uvd, 0x0016, 0x0002); /* Horizontal shift */
-		ibmcam_model2_Packet1(uvd, 0x0018, 0x004a); /* Another hardware setting */
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_model2_Packet1(uvd, 0x0014, 0x0009);
-		ibmcam_model2_Packet1(uvd, 0x0016, 0x0005); /* Horizontal shift */
-		ibmcam_model2_Packet1(uvd, 0x0018, 0x0044); /* Another hardware setting */
-		break;
-	case VIDEOSIZE_352x240:
-		/* This mode doesn't work as Windows programs it; changed to work */
-		ibmcam_model2_Packet1(uvd, 0x0014, 0x0009); /* Windows sets this to 8 */
-		ibmcam_model2_Packet1(uvd, 0x0016, 0x0003); /* Horizontal shift */
-		ibmcam_model2_Packet1(uvd, 0x0018, 0x0044); /* Windows sets this to 0x0045 */
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_model2_Packet1(uvd, 0x0014, 0x0003);
-		ibmcam_model2_Packet1(uvd, 0x0016, 0x0002); /* Horizontal shift */
-		ibmcam_model2_Packet1(uvd, 0x0018, 0x004a); /* Another hardware setting */
-		break;
-	}
-
-	ibmcam_model2_Packet1(uvd, mod2_brightness, 0x005a);
-
-	/*
-	 * We have our own frame rate setting varying from 0 (slowest) to 6 (fastest).
-	 * The camera model 2 allows frame rate in range [0..0x1F] where 0 is also the
-	 * slowest setting. However for all practical reasons high settings make no
-	 * sense because USB is not fast enough to support high FPS. Be aware that
-	 * the picture datastream will be severely disrupted if you ask for
-	 * frame rate faster than allowed for the video size - see below:
-	 *
-	 * Allowable ranges (obtained experimentally on OHCI, K6-3, 450 MHz):
-	 * -----------------------------------------------------------------
-	 * 176x144: [6..31]
-	 * 320x240: [8..31]
-	 * 352x240: [10..31]
-	 * 352x288: [16..31] I have to raise lower threshold for stability...
-	 *
-	 * As usual, slower FPS provides better sensitivity.
-	 */
-	{
-		short hw_fps=31, i_framerate;
-
-		RESTRICT_TO_RANGE(framerate, FRAMERATE_MIN, FRAMERATE_MAX);
-		i_framerate = FRAMERATE_MAX - framerate + FRAMERATE_MIN;
-		switch (uvd->videosize) {
-		case VIDEOSIZE_176x144:
-			hw_fps = 6 + i_framerate*4;
-			break;
-		case VIDEOSIZE_320x240:
-			hw_fps = 8 + i_framerate*3;
-			break;
-		case VIDEOSIZE_352x240:
-			hw_fps = 10 + i_framerate*2;
-			break;
-		case VIDEOSIZE_352x288:
-			hw_fps = 28 + i_framerate/2;
-			break;
-		}
-		if (uvd->debug > 0)
-			dev_info(&uvd->dev->dev, "Framerate (hardware): %hd.\n",
-				 hw_fps);
-		RESTRICT_TO_RANGE(hw_fps, 0, 31);
-		ibmcam_model2_Packet1(uvd, mod2_set_framerate, hw_fps);
-	}
-
-	/*
-	 * This setting does not visibly affect pictures; left it here
-	 * because it was present in Windows USB data stream. This function
-	 * does not allow arbitrary values and apparently is a bit mask, to
-	 * be activated only at appropriate time. Don't change it randomly!
-	 */
-	switch (uvd->videosize) {
-	case VIDEOSIZE_176x144:
-		ibmcam_model2_Packet1(uvd, 0x0026, 0x00c2);
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_model2_Packet1(uvd, 0x0026, 0x0044);
-		break;
-	case VIDEOSIZE_352x240:
-		ibmcam_model2_Packet1(uvd, 0x0026, 0x0046);
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_model2_Packet1(uvd, 0x0026, 0x0048);
-		break;
-	}
-
-	ibmcam_model2_Packet1(uvd, mod2_sensitivity, lighting);
-
-	if (init_model2_rg2 >= 0) {
-		RESTRICT_TO_RANGE(init_model2_rg2, 0, 255);
-		setup_model2_rg2 = init_model2_rg2;
-	} else
-		setup_model2_rg2 = 0x002f;
-
-	if (init_model2_sat >= 0) {
-		RESTRICT_TO_RANGE(init_model2_sat, 0, 255);
-		setup_model2_sat = init_model2_sat;
-	} else
-		setup_model2_sat = 0x0034;
-
-	if (init_model2_yb >= 0) {
-		RESTRICT_TO_RANGE(init_model2_yb, 0, 255);
-		setup_model2_yb = init_model2_yb;
-	} else
-		setup_model2_yb = 0x00a0;
-
-	ibmcam_model2_Packet1(uvd, mod2_color_balance_rg2, setup_model2_rg2);
-	ibmcam_model2_Packet1(uvd, mod2_saturation, setup_model2_sat);
-	ibmcam_model2_Packet1(uvd, mod2_color_balance_yb, setup_model2_yb);
-	ibmcam_model2_Packet1(uvd, mod2_hue, uvd->vpic.hue >> 9); /* 0 .. 7F */;
-
-	/* Hardware control command */
-	ibmcam_model2_Packet1(uvd, 0x0030, 0x0004);
-
-	ibmcam_veio(uvd, 0, 0x00c0, 0x010c);	/* Go camera, go! */
-	usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-}
-
-static void ibmcam_model4_setup_after_video_if(struct uvd *uvd)
-{
-	switch (uvd->videosize) {
-	case VIDEOSIZE_128x96:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);
-		ibmcam_veio(uvd, 0, 0x00d2, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x005e, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-		ibmcam_veio(uvd, 0, 0x0028, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
-		ibmcam_veio(uvd, 0, 0x001e, 0x0105);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000a, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
-		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0043, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00eb, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0017, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0031, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0017, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0078, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		break;
-	case VIDEOSIZE_160x120:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0038, 0x0119);
-		ibmcam_veio(uvd, 0, 0x00d8, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0002, 0x0106);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00b9, 0x010a);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-		ibmcam_veio(uvd, 0, 0x0028, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
-		ibmcam_veio(uvd, 0, 0x001e, 0x0105);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000b, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
-		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0043, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00c7, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0025, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0048, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0035, 0x012e);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0048, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0090, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		break;
-	case VIDEOSIZE_176x144:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0038, 0x0119);
-		ibmcam_veio(uvd, 0, 0x00d6, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x0018, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00b9, 0x010a);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-		ibmcam_veio(uvd, 0, 0x002c, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
-		ibmcam_veio(uvd, 0, 0x0024, 0x0105);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0007, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0001, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
-		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005e, 0x012d);
-		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0049, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00c7, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0028, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0010, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
-		ibmcam_veio(uvd, 0, 0x002a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0010, 0x012d);
-		ibmcam_veio(uvd, 0, 0x006d, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);
-		ibmcam_veio(uvd, 0, 0x00d2, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x005e, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x00d0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-		ibmcam_veio(uvd, 0, 0x0028, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
-		ibmcam_veio(uvd, 0, 0x001e, 0x0105);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000a, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
-		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0043, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00eb, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0017, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0031, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0017, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0078, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		break;
-	case VIDEOSIZE_352x288:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00bc, 0x012c);
-		ibmcam_veio(uvd, 0, 0x0080, 0x012b);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0108);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0133);
-		ibmcam_veio(uvd, 0, 0x009b, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00bb, 0x010f);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x000a, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005c, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0004, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00fb, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x000c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0009, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0012, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x002a, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0000, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0034, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0070, 0x0119);
-		ibmcam_veio(uvd, 0, 0x00f2, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x008c, 0x0107);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x0111);
-		ibmcam_veio(uvd, 0, 0x0039, 0x010a);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0102);
-		ibmcam_veio(uvd, 0, 0x002c, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0104);
-		ibmcam_veio(uvd, 0, 0x0024, 0x0105);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0016, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0006, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0014, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0002, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012e);
-		ibmcam_veio(uvd, 0, 0x001a, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a0a, 0x0124);
-		ibmcam_veio(uvd, 0, 0x005e, 0x012d);
-		ibmcam_veio(uvd, 0, 0x9545, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0018, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0049, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd055, 0x0124);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00cf, 0x012e);
-		ibmcam_veio(uvd, 0, 0xaa28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0032, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x0130);
-		ibmcam_veio(uvd, 0, 0x82a8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0036, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0008, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0xfffa, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x001e, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0010, 0x0127);
-		ibmcam_veio(uvd, 0, 0x0013, 0x012e);
-		ibmcam_veio(uvd, 0, 0x0025, 0x0130);
-		ibmcam_veio(uvd, 0, 0x8a28, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0010, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0048, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd145, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00aa, 0x012d);
-		ibmcam_veio(uvd, 0, 0x0038, 0x012f);
-		ibmcam_veio(uvd, 0, 0xd141, 0x0124);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0127);
-		ibmcam_veio(uvd, 0, 0xfea8, 0x0124);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		break;
-	}
-	usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-}
-
-static void ibmcam_model3_setup_after_video_if(struct uvd *uvd)
-{
-	int i;
-	/*
-	 * 01.01.08 - Added for RCA video in support -LO
-	 * This struct is used to init the Model3 cam to use the RCA video in port
-	 * instead of the CCD sensor.
-	 */
-	static const struct struct_initData initData[] = {
-		{0, 0x0000, 0x010c},
-		{0, 0x0006, 0x012c},
-		{0, 0x0078, 0x012d},
-		{0, 0x0046, 0x012f},
-		{0, 0xd141, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfea8, 0x0124},
-		{1, 0x0000, 0x0116},
-		{0, 0x0064, 0x0116},
-		{1, 0x0000, 0x0115},
-		{0, 0x0003, 0x0115},
-		{0, 0x0008, 0x0123},
-		{0, 0x0000, 0x0117},
-		{0, 0x0000, 0x0112},
-		{0, 0x0080, 0x0100},
-		{0, 0x0000, 0x0100},
-		{1, 0x0000, 0x0116},
-		{0, 0x0060, 0x0116},
-		{0, 0x0002, 0x0112},
-		{0, 0x0000, 0x0123},
-		{0, 0x0001, 0x0117},
-		{0, 0x0040, 0x0108},
-		{0, 0x0019, 0x012c},
-		{0, 0x0040, 0x0116},
-		{0, 0x000a, 0x0115},
-		{0, 0x000b, 0x0115},
-		{0, 0x0078, 0x012d},
-		{0, 0x0046, 0x012f},
-		{0, 0xd141, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfea8, 0x0124},
-		{0, 0x0064, 0x0116},
-		{0, 0x0000, 0x0115},
-		{0, 0x0001, 0x0115},
-		{0, 0xffff, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00aa, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xffff, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00f2, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x000f, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xffff, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00f8, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00fc, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xffff, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00f9, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x003c, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xffff, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0027, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0019, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0021, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0006, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0045, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002a, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x000e, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002b, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00f4, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002c, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0004, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002d, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0014, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002e, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0003, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x002f, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0003, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0014, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0053, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0x0000, 0x0101},
-		{0, 0x00a0, 0x0103},
-		{0, 0x0078, 0x0105},
-		{0, 0x0000, 0x010a},
-		{0, 0x0024, 0x010b},
-		{0, 0x0028, 0x0119},
-		{0, 0x0088, 0x011b},
-		{0, 0x0002, 0x011d},
-		{0, 0x0003, 0x011e},
-		{0, 0x0000, 0x0129},
-		{0, 0x00fc, 0x012b},
-		{0, 0x0008, 0x0102},
-		{0, 0x0000, 0x0104},
-		{0, 0x0008, 0x011a},
-		{0, 0x0028, 0x011c},
-		{0, 0x0021, 0x012a},
-		{0, 0x0000, 0x0118},
-		{0, 0x0000, 0x0132},
-		{0, 0x0000, 0x0109},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0031, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x00dc, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0032, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0020, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0001, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0040, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0037, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0030, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0xfff9, 0x0124},
-		{0, 0x0086, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0038, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0008, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0x0000, 0x0127},
-		{0, 0xfff8, 0x0124},
-		{0, 0xfffd, 0x0124},
-		{0, 0xfffa, 0x0124},
-		{0, 0x0003, 0x0106},
-		{0, 0x0062, 0x0107},
-		{0, 0x0003, 0x0111},
-	};
-#define NUM_INIT_DATA
-
-	unsigned short compression = 0;	/* 0=none, 7=best frame rate  */
-	int f_rate; /* 0=Fastest 7=slowest */
-
-	if (IBMCAM_T(uvd)->initialized)
-		return;
-
-	/* Internal frame rate is controlled by f_rate value */
-	f_rate = 7 - framerate;
-	RESTRICT_TO_RANGE(f_rate, 0, 7);
-
-	ibmcam_veio(uvd, 0, 0x0000, 0x0100);
-	ibmcam_veio(uvd, 1, 0x0000, 0x0116);
-	ibmcam_veio(uvd, 0, 0x0060, 0x0116);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0112);
-	ibmcam_veio(uvd, 0, 0x0000, 0x0123);
-	ibmcam_veio(uvd, 0, 0x0001, 0x0117);
-	ibmcam_veio(uvd, 0, 0x0040, 0x0108);
-	ibmcam_veio(uvd, 0, 0x0019, 0x012c);
-	ibmcam_veio(uvd, 0, 0x0060, 0x0116);
-	ibmcam_veio(uvd, 0, 0x0002, 0x0115);
-	ibmcam_veio(uvd, 0, 0x0003, 0x0115);
-	ibmcam_veio(uvd, 1, 0x0000, 0x0115);
-	ibmcam_veio(uvd, 0, 0x000b, 0x0115);
-	ibmcam_model3_Packet1(uvd, 0x000a, 0x0040);
-	ibmcam_model3_Packet1(uvd, 0x000b, 0x00f6);
-	ibmcam_model3_Packet1(uvd, 0x000c, 0x0002);
-	ibmcam_model3_Packet1(uvd, 0x000d, 0x0020);
-	ibmcam_model3_Packet1(uvd, 0x000e, 0x0033);
-	ibmcam_model3_Packet1(uvd, 0x000f, 0x0007);
-	ibmcam_model3_Packet1(uvd, 0x0010, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0011, 0x0070);
-	ibmcam_model3_Packet1(uvd, 0x0012, 0x0030);
-	ibmcam_model3_Packet1(uvd, 0x0013, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0014, 0x0001);
-	ibmcam_model3_Packet1(uvd, 0x0015, 0x0001);
-	ibmcam_model3_Packet1(uvd, 0x0016, 0x0001);
-	ibmcam_model3_Packet1(uvd, 0x0017, 0x0001);
-	ibmcam_model3_Packet1(uvd, 0x0018, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x001e, 0x00c3);
-	ibmcam_model3_Packet1(uvd, 0x0020, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0028, 0x0010);
-	ibmcam_model3_Packet1(uvd, 0x0029, 0x0054);
-	ibmcam_model3_Packet1(uvd, 0x002a, 0x0013);
-	ibmcam_model3_Packet1(uvd, 0x002b, 0x0007);
-	ibmcam_model3_Packet1(uvd, 0x002d, 0x0028);
-	ibmcam_model3_Packet1(uvd, 0x002e, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0031, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0032, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0033, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0034, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0035, 0x0038);
-	ibmcam_model3_Packet1(uvd, 0x003a, 0x0001);
-	ibmcam_model3_Packet1(uvd, 0x003c, 0x001e);
-	ibmcam_model3_Packet1(uvd, 0x003f, 0x000a);
-	ibmcam_model3_Packet1(uvd, 0x0041, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0046, 0x003f);
-	ibmcam_model3_Packet1(uvd, 0x0047, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0050, 0x0005);
-	ibmcam_model3_Packet1(uvd, 0x0052, 0x001a);
-	ibmcam_model3_Packet1(uvd, 0x0053, 0x0003);
-	ibmcam_model3_Packet1(uvd, 0x005a, 0x006b);
-	ibmcam_model3_Packet1(uvd, 0x005d, 0x001e);
-	ibmcam_model3_Packet1(uvd, 0x005e, 0x0030);
-	ibmcam_model3_Packet1(uvd, 0x005f, 0x0041);
-	ibmcam_model3_Packet1(uvd, 0x0064, 0x0008);
-	ibmcam_model3_Packet1(uvd, 0x0065, 0x0015);
-	ibmcam_model3_Packet1(uvd, 0x0068, 0x000f);
-	ibmcam_model3_Packet1(uvd, 0x0079, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x007a, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x007c, 0x003f);
-	ibmcam_model3_Packet1(uvd, 0x0082, 0x000f);
-	ibmcam_model3_Packet1(uvd, 0x0085, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x0099, 0x0000);
-	ibmcam_model3_Packet1(uvd, 0x009b, 0x0023);
-	ibmcam_model3_Packet1(uvd, 0x009c, 0x0022);
-	ibmcam_model3_Packet1(uvd, 0x009d, 0x0096);
-	ibmcam_model3_Packet1(uvd, 0x009e, 0x0096);
-	ibmcam_model3_Packet1(uvd, 0x009f, 0x000a);
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_160x120:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0101); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x00a0, 0x0103); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x0078, 0x0105); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */
-		ibmcam_veio(uvd, 0, 0x0024, 0x010b); /* Differs everywhere */
-		ibmcam_veio(uvd, 0, 0x00a9, 0x0119);
-		ibmcam_veio(uvd, 0, 0x0016, 0x011b);
-		ibmcam_veio(uvd, 0, 0x0002, 0x011d); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x0003, 0x011e); /* Same on 176x144, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */
-		ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */
-		ibmcam_veio(uvd, 0, 0x0018, 0x0102);
-		ibmcam_veio(uvd, 0, 0x0004, 0x0104);
-		ibmcam_veio(uvd, 0, 0x0004, 0x011a);
-		ibmcam_veio(uvd, 0, 0x0028, 0x011c);
-		ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0118);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0132);
-		ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */
-		ibmcam_veio(uvd, 0, compression, 0x0109);
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_veio(uvd, 0, 0x0000, 0x0101); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x00a0, 0x0103); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x0078, 0x0105); /* Same on 176x144, 320x240 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */
-		ibmcam_veio(uvd, 0, 0x0028, 0x010b); /* Differs everywhere */
-		ibmcam_veio(uvd, 0, 0x0002, 0x011d); /* Same */
-		ibmcam_veio(uvd, 0, 0x0000, 0x011e);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */
-		ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */
-		/* 4 commands from 160x120 skipped */
-		ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */
-		ibmcam_veio(uvd, 0, compression, 0x0109);
-		ibmcam_veio(uvd, 0, 0x00d9, 0x0119);
-		ibmcam_veio(uvd, 0, 0x0006, 0x011b);
-		ibmcam_veio(uvd, 0, 0x0021, 0x0102); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0010, 0x0104);
-		ibmcam_veio(uvd, 0, 0x0004, 0x011a);
-		ibmcam_veio(uvd, 0, 0x003f, 0x011c);
-		ibmcam_veio(uvd, 0, 0x001c, 0x0118);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0132);
-		break;
-	case VIDEOSIZE_640x480:
-		ibmcam_veio(uvd, 0, 0x00f0, 0x0105);
-		ibmcam_veio(uvd, 0, 0x0000, 0x010a); /* Same */
-		ibmcam_veio(uvd, 0, 0x0038, 0x010b); /* Differs everywhere */
-		ibmcam_veio(uvd, 0, 0x00d9, 0x0119); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0006, 0x011b); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0004, 0x011d); /* NC */
-		ibmcam_veio(uvd, 0, 0x0003, 0x011e); /* Same on 176x144, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0000, 0x0129); /* Same */
-		ibmcam_veio(uvd, 0, 0x00fc, 0x012b); /* Same */
-		ibmcam_veio(uvd, 0, 0x0021, 0x0102); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0016, 0x0104); /* NC */
-		ibmcam_veio(uvd, 0, 0x0004, 0x011a); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x003f, 0x011c); /* Same on 320x240, 640x480 */
-		ibmcam_veio(uvd, 0, 0x0022, 0x012a); /* Same */
-		ibmcam_veio(uvd, 0, 0x001c, 0x0118); /* Same on 320x240, 640x480 */
-		ibmcam_model3_Packet1(uvd, 0x0021, 0x0001); /* Same */
-		ibmcam_veio(uvd, 0, compression, 0x0109);
-		ibmcam_veio(uvd, 0, 0x0040, 0x0101);
-		ibmcam_veio(uvd, 0, 0x0040, 0x0103);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0132); /* Same on 320x240, 640x480 */
-		break;
-	}
-	ibmcam_model3_Packet1(uvd, 0x007e, 0x000e);	/* Hue */
-	ibmcam_model3_Packet1(uvd, 0x0036, 0x0011);	/* Brightness */
-	ibmcam_model3_Packet1(uvd, 0x0060, 0x0002);	/* Sharpness */
-	ibmcam_model3_Packet1(uvd, 0x0061, 0x0004);	/* Sharpness */
-	ibmcam_model3_Packet1(uvd, 0x0062, 0x0005);	/* Sharpness */
-	ibmcam_model3_Packet1(uvd, 0x0063, 0x0014);	/* Sharpness */
-	ibmcam_model3_Packet1(uvd, 0x0096, 0x00a0);	/* Red gain */
-	ibmcam_model3_Packet1(uvd, 0x0097, 0x0096);	/* Blue gain */
-	ibmcam_model3_Packet1(uvd, 0x0067, 0x0001);	/* Contrast */
-	ibmcam_model3_Packet1(uvd, 0x005b, 0x000c);	/* Contrast */
-	ibmcam_model3_Packet1(uvd, 0x005c, 0x0016);	/* Contrast */
-	ibmcam_model3_Packet1(uvd, 0x0098, 0x000b);
-	ibmcam_model3_Packet1(uvd, 0x002c, 0x0003);	/* Was 1, broke 640x480 */
-	ibmcam_model3_Packet1(uvd, 0x002f, 0x002a);
-	ibmcam_model3_Packet1(uvd, 0x0030, 0x0029);
-	ibmcam_model3_Packet1(uvd, 0x0037, 0x0002);
-	ibmcam_model3_Packet1(uvd, 0x0038, 0x0059);
-	ibmcam_model3_Packet1(uvd, 0x003d, 0x002e);
-	ibmcam_model3_Packet1(uvd, 0x003e, 0x0028);
-	ibmcam_model3_Packet1(uvd, 0x0078, 0x0005);
-	ibmcam_model3_Packet1(uvd, 0x007b, 0x0011);
-	ibmcam_model3_Packet1(uvd, 0x007d, 0x004b);
-	ibmcam_model3_Packet1(uvd, 0x007f, 0x0022);
-	ibmcam_model3_Packet1(uvd, 0x0080, 0x000c);
-	ibmcam_model3_Packet1(uvd, 0x0081, 0x000b);
-	ibmcam_model3_Packet1(uvd, 0x0083, 0x00fd);
-	ibmcam_model3_Packet1(uvd, 0x0086, 0x000b);
-	ibmcam_model3_Packet1(uvd, 0x0087, 0x000b);
-	ibmcam_model3_Packet1(uvd, 0x007e, 0x000e);
-	ibmcam_model3_Packet1(uvd, 0x0096, 0x00a0);	/* Red gain */
-	ibmcam_model3_Packet1(uvd, 0x0097, 0x0096);	/* Blue gain */
-	ibmcam_model3_Packet1(uvd, 0x0098, 0x000b);
-
-	switch (uvd->videosize) {
-	case VIDEOSIZE_160x120:
-		ibmcam_veio(uvd, 0, 0x0002, 0x0106);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0107);
-		ibmcam_veio(uvd, 0, f_rate, 0x0111);	/* Frame rate */
-		ibmcam_model3_Packet1(uvd, 0x001f, 0x0000); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x0039, 0x001f); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x003b, 0x003c); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x0040, 0x000a);
-		ibmcam_model3_Packet1(uvd, 0x0051, 0x000a);
-		break;
-	case VIDEOSIZE_320x240:
-		ibmcam_veio(uvd, 0, 0x0003, 0x0106);
-		ibmcam_veio(uvd, 0, 0x0062, 0x0107);
-		ibmcam_veio(uvd, 0, f_rate, 0x0111);	/* Frame rate */
-		ibmcam_model3_Packet1(uvd, 0x001f, 0x0000); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x0039, 0x001f); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x003b, 0x003c); /* Same */
-		ibmcam_model3_Packet1(uvd, 0x0040, 0x0008);
-		ibmcam_model3_Packet1(uvd, 0x0051, 0x000b);
-		break;
-	case VIDEOSIZE_640x480:
-		ibmcam_veio(uvd, 0, 0x0002, 0x0106);	/* Adjustments */
-		ibmcam_veio(uvd, 0, 0x00b4, 0x0107);	/* Adjustments */
-		ibmcam_veio(uvd, 0, f_rate, 0x0111);	/* Frame rate */
-		ibmcam_model3_Packet1(uvd, 0x001f, 0x0002); /* !Same */
-		ibmcam_model3_Packet1(uvd, 0x0039, 0x003e); /* !Same */
-		ibmcam_model3_Packet1(uvd, 0x0040, 0x0008);
-		ibmcam_model3_Packet1(uvd, 0x0051, 0x000a);
-		break;
-	}
-
-	/* 01.01.08 - Added for RCA video in support -LO */
-	if(init_model3_input) {
-		if (debug > 0)
-			dev_info(&uvd->dev->dev, "Setting input to RCA.\n");
-		for (i=0; i < ARRAY_SIZE(initData); i++) {
-			ibmcam_veio(uvd, initData[i].req, initData[i].value, initData[i].index);
-		}
-	}
-
-	ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-	ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-	usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-}
-
-/*
- * ibmcam_video_stop()
- *
- * This code tells camera to stop streaming. The interface remains
- * configured and bandwidth - claimed.
- */
-static void ibmcam_video_stop(struct uvd *uvd)
-{
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-		ibmcam_veio(uvd, 0, 0x00, 0x010c);
-		ibmcam_veio(uvd, 0, 0x00, 0x010c);
-		ibmcam_veio(uvd, 0, 0x01, 0x0114);
-		ibmcam_veio(uvd, 0, 0xc0, 0x010c);
-		ibmcam_veio(uvd, 0, 0x00, 0x010c);
-		ibmcam_send_FF_04_02(uvd);
-		ibmcam_veio(uvd, 1, 0x00, 0x0100);
-		ibmcam_veio(uvd, 0, 0x81, 0x0100);	/* LED Off */
-		break;
-	case IBMCAM_MODEL_2:
-case IBMCAM_MODEL_4:
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);	/* Stop the camera */
-
-		ibmcam_model2_Packet1(uvd, 0x0030, 0x0004);
-
-		ibmcam_veio(uvd, 0, 0x0080, 0x0100);	/* LED Off */
-		ibmcam_veio(uvd, 0, 0x0020, 0x0111);
-		ibmcam_veio(uvd, 0, 0x00a0, 0x0111);
-
-		ibmcam_model2_Packet1(uvd, 0x0030, 0x0002);
-
-		ibmcam_veio(uvd, 0, 0x0020, 0x0111);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0112);
-		break;
-	case IBMCAM_MODEL_3:
-#if 1
-		ibmcam_veio(uvd, 0, 0x0000, 0x010c);
-
-		/* Here we are supposed to select video interface alt. setting 0 */
-		ibmcam_veio(uvd, 0, 0x0006, 0x012c);
-
-		ibmcam_model3_Packet1(uvd, 0x0046, 0x0000);
-
-		ibmcam_veio(uvd, 1, 0x0000, 0x0116);
-		ibmcam_veio(uvd, 0, 0x0064, 0x0116);
-		ibmcam_veio(uvd, 1, 0x0000, 0x0115);
-		ibmcam_veio(uvd, 0, 0x0003, 0x0115);
-		ibmcam_veio(uvd, 0, 0x0008, 0x0123);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0117);
-		ibmcam_veio(uvd, 0, 0x0000, 0x0112);
-		ibmcam_veio(uvd, 0, 0x0080, 0x0100);
-		IBMCAM_T(uvd)->initialized = 0;
-#endif
-		break;
-	} /* switch */
-}
-
-/*
- * ibmcam_reinit_iso()
- *
- * This procedure sends couple of commands to the camera and then
- * resets the video pipe. This sequence was observed to reinit the
- * camera or, at least, to initiate ISO data stream.
- *
- * History:
- * 1/2/00   Created.
- */
-static void ibmcam_reinit_iso(struct uvd *uvd, int do_stop)
-{
-	switch (IBMCAM_T(uvd)->camera_model) {
-	case IBMCAM_MODEL_1:
-		if (do_stop)
-			ibmcam_video_stop(uvd);
-		ibmcam_veio(uvd, 0, 0x0001, 0x0114);
-		ibmcam_veio(uvd, 0, 0x00c0, 0x010c);
-		usb_clear_halt(uvd->dev, usb_rcvisocpipe(uvd->dev, uvd->video_endp));
-		ibmcam_model1_setup_after_video_if(uvd);
-		break;
-	case IBMCAM_MODEL_2:
-		ibmcam_model2_setup_after_video_if(uvd);
-		break;
-	case IBMCAM_MODEL_3:
-		ibmcam_video_stop(uvd);
-		ibmcam_model3_setup_after_video_if(uvd);
-		break;
-	case IBMCAM_MODEL_4:
-		ibmcam_model4_setup_after_video_if(uvd);
-		break;
-	}
-}
-
-static void ibmcam_video_start(struct uvd *uvd)
-{
-	ibmcam_change_lighting_conditions(uvd);
-	ibmcam_set_sharpness(uvd);
-	ibmcam_reinit_iso(uvd, 0);
-}
-
-/*
- * Return negative code on failure, 0 on success.
- */
-static int ibmcam_setup_on_open(struct uvd *uvd)
-{
-	int setup_ok = 0; /* Success by default */
-	/* Send init sequence only once, it's large! */
-	if (!IBMCAM_T(uvd)->initialized) { /* FIXME rename */
-		switch (IBMCAM_T(uvd)->camera_model) {
-		case IBMCAM_MODEL_1:
-			setup_ok = ibmcam_model1_setup(uvd);
-			break;
-		case IBMCAM_MODEL_2:
-			setup_ok = ibmcam_model2_setup(uvd);
-			break;
-		case IBMCAM_MODEL_3:
-		case IBMCAM_MODEL_4:
-			/* We do all setup when Isoc stream is requested */
-			break;
-		}
-		IBMCAM_T(uvd)->initialized = (setup_ok != 0);
-	}
-	return setup_ok;
-}
-
-static void ibmcam_configure_video(struct uvd *uvd)
-{
-	if (uvd == NULL)
-		return;
-
-	RESTRICT_TO_RANGE(init_brightness, 0, 255);
-	RESTRICT_TO_RANGE(init_contrast, 0, 255);
-	RESTRICT_TO_RANGE(init_color, 0, 255);
-	RESTRICT_TO_RANGE(init_hue, 0, 255);
-	RESTRICT_TO_RANGE(hue_correction, 0, 255);
-
-	memset(&uvd->vpic, 0, sizeof(uvd->vpic));
-	memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
-
-	uvd->vpic.colour = init_color << 8;
-	uvd->vpic.hue = init_hue << 8;
-	uvd->vpic.brightness = init_brightness << 8;
-	uvd->vpic.contrast = init_contrast << 8;
-	uvd->vpic.whiteness = 105 << 8; /* This one isn't used */
-	uvd->vpic.depth = 24;
-	uvd->vpic.palette = VIDEO_PALETTE_RGB24;
-
-	memset(&uvd->vcap, 0, sizeof(uvd->vcap));
-	strcpy(uvd->vcap.name, "IBM USB Camera");
-	uvd->vcap.type = VID_TYPE_CAPTURE;
-	uvd->vcap.channels = 1;
-	uvd->vcap.audios = 0;
-	uvd->vcap.maxwidth = VIDEOSIZE_X(uvd->canvas);
-	uvd->vcap.maxheight = VIDEOSIZE_Y(uvd->canvas);
-	uvd->vcap.minwidth = min_canvasWidth;
-	uvd->vcap.minheight = min_canvasHeight;
-
-	memset(&uvd->vchan, 0, sizeof(uvd->vchan));
-	uvd->vchan.flags = 0;
-	uvd->vchan.tuners = 0;
-	uvd->vchan.channel = 0;
-	uvd->vchan.type = VIDEO_TYPE_CAMERA;
-	strcpy(uvd->vchan.name, "Camera");
-}
-
-/*
- * ibmcam_probe()
- *
- * This procedure queries device descriptor and accepts the interface
- * if it looks like IBM C-it camera.
- *
- * History:
- * 22-Jan-2000 Moved camera init code to ibmcam_open()
- * 27=Jan-2000 Changed to use static structures, added locking.
- * 24-May-2000 Corrected to prevent race condition (MOD_xxx_USE_COUNT).
- * 03-Jul-2000 Fixed endianness bug.
- * 12-Nov-2000 Reworked to comply with new probe() signature.
- * 23-Jan-2001 Added compatibility with 2.2.x kernels.
- */
-static int ibmcam_probe(struct usb_interface *intf, const struct usb_device_id *devid)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct uvd *uvd = NULL;
-	int ix, i, nas, model=0, canvasX=0, canvasY=0;
-	int actInterface=-1, inactInterface=-1, maxPS=0;
-	__u8 ifnum = intf->altsetting->desc.bInterfaceNumber;
-	unsigned char video_ep = 0;
-
-	if (debug >= 1)
-		dev_info(&dev->dev, "ibmcam_probe(%p,%u.)\n", intf, ifnum);
-
-	/* We don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	/* Check the version/revision */
-	switch (le16_to_cpu(dev->descriptor.bcdDevice)) {
-	case 0x0002:
-		if (ifnum != 2)
-			return -ENODEV;
-		model = IBMCAM_MODEL_1;
-		break;
-	case 0x030A:
-		if (ifnum != 0)
-			return -ENODEV;
-		if ((le16_to_cpu(dev->descriptor.idProduct) == NETCAM_PRODUCT_ID) ||
-		    (le16_to_cpu(dev->descriptor.idProduct) == VEO_800D_PRODUCT_ID))
-			model = IBMCAM_MODEL_4;
-		else
-			model = IBMCAM_MODEL_2;
-		break;
-	case 0x0301:
-		if (ifnum != 0)
-			return -ENODEV;
-		model = IBMCAM_MODEL_3;
-		break;
-	default:
-		err("IBM camera with revision 0x%04x is not supported.",
-			le16_to_cpu(dev->descriptor.bcdDevice));
-		return -ENODEV;
-	}
-
-	/* Print detailed info on what we found so far */
-	do {
-		char *brand = NULL;
-		switch (le16_to_cpu(dev->descriptor.idProduct)) {
-		case NETCAM_PRODUCT_ID:
-			brand = "IBM NetCamera";
-			break;
-		case VEO_800C_PRODUCT_ID:
-			brand = "Veo Stingray [800C]";
-			break;
-		case VEO_800D_PRODUCT_ID:
-			brand = "Veo Stingray [800D]";
-			break;
-		case IBMCAM_PRODUCT_ID:
-		default:
-			brand = "IBM PC Camera"; /* a.k.a. Xirlink C-It */
-			break;
-		}
-		dev_info(&dev->dev,
-			 "%s USB camera found (model %d, rev. 0x%04x)\n",
-			 brand, model, le16_to_cpu(dev->descriptor.bcdDevice));
-	} while (0);
-
-	/* Validate found interface: must have one ISO endpoint */
-	nas = intf->num_altsetting;
-	if (debug > 0)
-		dev_info(&dev->dev, "Number of alternate settings=%d.\n",
-			 nas);
-	if (nas < 2) {
-		err("Too few alternate settings for this camera!");
-		return -ENODEV;
-	}
-	/* Validate all alternate settings */
-	for (ix=0; ix < nas; ix++) {
-		const struct usb_host_interface *interface;
-		const struct usb_endpoint_descriptor *endpoint;
-
-		interface = &intf->altsetting[ix];
-		i = interface->desc.bAlternateSetting;
-		if (interface->desc.bNumEndpoints != 1) {
-			err("Interface %d. has %u. endpoints!",
-			    ifnum, (unsigned)(interface->desc.bNumEndpoints));
-			return -ENODEV;
-		}
-		endpoint = &interface->endpoint[0].desc;
-		if (video_ep == 0)
-			video_ep = endpoint->bEndpointAddress;
-		else if (video_ep != endpoint->bEndpointAddress) {
-			err("Alternate settings have different endpoint addresses!");
-			return -ENODEV;
-		}
-		if (!usb_endpoint_xfer_isoc(endpoint)) {
-			err("Interface %d. has non-ISO endpoint!", ifnum);
-			return -ENODEV;
-		}
-		if (usb_endpoint_dir_out(endpoint)) {
-			err("Interface %d. has ISO OUT endpoint!", ifnum);
-			return -ENODEV;
-		}
-		if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) {
-			if (inactInterface < 0)
-				inactInterface = i;
-			else {
-				err("More than one inactive alt. setting!");
-				return -ENODEV;
-			}
-		} else {
-			if (actInterface < 0) {
-				actInterface = i;
-				maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
-				if (debug > 0)
-					dev_info(&dev->dev,
-						 "Active setting=%d. "
-						 "maxPS=%d.\n", i, maxPS);
-			} else
-				err("More than one active alt. setting! Ignoring #%d.", i);
-		}
-	}
-	if ((maxPS <= 0) || (actInterface < 0) || (inactInterface < 0)) {
-		err("Failed to recognize the camera!");
-		return -ENODEV;
-	}
-
-	/* Validate options */
-	switch (model) {
-	case IBMCAM_MODEL_1:
-		RESTRICT_TO_RANGE(lighting, 0, 2);
-		RESTRICT_TO_RANGE(size, SIZE_128x96, SIZE_352x288);
-		if (framerate < 0)
-			framerate = 2;
-		canvasX = 352;
-		canvasY = 288;
-		break;
-	case IBMCAM_MODEL_2:
-		RESTRICT_TO_RANGE(lighting, 0, 15);
-		RESTRICT_TO_RANGE(size, SIZE_176x144, SIZE_352x240);
-		if (framerate < 0)
-			framerate = 2;
-		canvasX = 352;
-		canvasY = 240;
-		break;
-	case IBMCAM_MODEL_3:
-		RESTRICT_TO_RANGE(lighting, 0, 15); /* FIXME */
-		switch (size) {
-		case SIZE_160x120:
-			canvasX = 160;
-			canvasY = 120;
-			if (framerate < 0)
-				framerate = 2;
-			RESTRICT_TO_RANGE(framerate, 0, 5);
-			break;
-		default:
-			dev_info(&dev->dev, "IBM camera: using 320x240\n");
-			size = SIZE_320x240;
-			/* No break here */
-		case SIZE_320x240:
-			canvasX = 320;
-			canvasY = 240;
-			if (framerate < 0)
-				framerate = 3;
-			RESTRICT_TO_RANGE(framerate, 0, 5);
-			break;
-		case SIZE_640x480:
-			canvasX = 640;
-			canvasY = 480;
-			framerate = 0;	/* Slowest, and maybe even that is too fast */
-			break;
-		}
-		break;
-	case IBMCAM_MODEL_4:
-		RESTRICT_TO_RANGE(lighting, 0, 2);
-		switch (size) {
-		case SIZE_128x96:
-			canvasX = 128;
-			canvasY = 96;
-			break;
-		case SIZE_160x120:
-			canvasX = 160;
-			canvasY = 120;
-			break;
-		default:
-			dev_info(&dev->dev, "IBM NetCamera: using 176x144\n");
-			size = SIZE_176x144;
-			/* No break here */
-		case SIZE_176x144:
-			canvasX = 176;
-			canvasY = 144;
-			break;
-		case SIZE_320x240:
-			canvasX = 320;
-			canvasY = 240;
-			break;
-		case SIZE_352x288:
-			canvasX = 352;
-			canvasY = 288;
-			break;
-		}
-		break;
-	default:
-		err("IBM camera: Model %d. not supported!", model);
-		return -ENODEV;
-	}
-
-	uvd = usbvideo_AllocateDevice(cams);
-	if (uvd != NULL) {
-		/* Here uvd is a fully allocated uvd object */
-		uvd->flags = flags;
-		uvd->debug = debug;
-		uvd->dev = dev;
-		uvd->iface = ifnum;
-		uvd->ifaceAltInactive = inactInterface;
-		uvd->ifaceAltActive = actInterface;
-		uvd->video_endp = video_ep;
-		uvd->iso_packet_len = maxPS;
-		uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24;
-		uvd->defaultPalette = VIDEO_PALETTE_RGB24;
-		uvd->canvas = VIDEOSIZE(canvasX, canvasY);
-		uvd->videosize = ibmcam_size_to_videosize(size);
-
-		/* Initialize ibmcam-specific data */
-		assert(IBMCAM_T(uvd) != NULL);
-		IBMCAM_T(uvd)->camera_model = model;
-		IBMCAM_T(uvd)->initialized = 0;
-
-		ibmcam_configure_video(uvd);
-
-		i = usbvideo_RegisterVideoDevice(uvd);
-		if (i != 0) {
-			err("usbvideo_RegisterVideoDevice() failed.");
-			uvd = NULL;
-		}
-	}
-	usb_set_intfdata (intf, uvd);
-	return 0;
-}
-
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0002, 0x0002) },	/* Model 1 */
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 2 */
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0301, 0x0301) },	/* Model 3 */
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, NETCAM_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 4 */
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800C_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 2 */
-	{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800D_PRODUCT_ID, 0x030a, 0x030a) },	/* Model 4 */
-	{ }  /* Terminating entry */
-};
-
-/*
- * ibmcam_init()
- *
- * This code is run to initialize the driver.
- *
- * History:
- * 1/27/00  Reworked to use statically allocated ibmcam structures.
- * 21/10/00 Completely redesigned to use usbvideo services.
- */
-static int __init ibmcam_init(void)
-{
-	struct usbvideo_cb cbTbl;
-	memset(&cbTbl, 0, sizeof(cbTbl));
-	cbTbl.probe = ibmcam_probe;
-	cbTbl.setupOnOpen = ibmcam_setup_on_open;
-	cbTbl.videoStart = ibmcam_video_start;
-	cbTbl.videoStop = ibmcam_video_stop;
-	cbTbl.processData = ibmcam_ProcessIsocData;
-	cbTbl.postProcess = usbvideo_DeinterlaceFrame;
-	cbTbl.adjustPicture = ibmcam_adjust_picture;
-	cbTbl.getFPS = ibmcam_calculate_fps;
-	return usbvideo_register(
-		&cams,
-		MAX_IBMCAM,
-		sizeof(ibmcam_t),
-		"ibmcam",
-		&cbTbl,
-		THIS_MODULE,
-		id_table);
-}
-
-static void __exit ibmcam_cleanup(void)
-{
-	usbvideo_Deregister(&cams);
-}
-
-MODULE_DEVICE_TABLE(usb, id_table);
-
-module_init(ibmcam_init);
-module_exit(ibmcam_cleanup);
diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c
deleted file mode 100644
index 562e1d170be..00000000000
--- a/drivers/media/video/usbvideo/konicawc.c
+++ /dev/null
@@ -1,992 +0,0 @@
-/*
- * konicawc.c - konica webcam driver
- *
- * Author: Simon Evans <spse@secret.org.uk>
- *
- * Copyright (C) 2002 Simon Evans
- *
- * Licence: GPL
- *
- * Driver for USB webcams based on Konica chipset. This
- * chipset is used in Intel YC76 camera.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/usb/input.h>
-#include <linux/gfp.h>
-
-#include "usbvideo.h"
-
-#define MAX_BRIGHTNESS	108
-#define MAX_CONTRAST	108
-#define MAX_SATURATION	108
-#define MAX_SHARPNESS	108
-#define MAX_WHITEBAL	372
-#define MAX_SPEED	6
-
-
-#define MAX_CAMERAS	1
-
-#define DRIVER_VERSION	"v1.4"
-#define DRIVER_DESC	"Konica Webcam driver"
-
-enum ctrl_req {
-	SetWhitebal	= 0x01,
-	SetBrightness	= 0x02,
-	SetSharpness	= 0x03,
-	SetContrast	= 0x04,
-	SetSaturation	= 0x05,
-};
-
-
-enum frame_sizes {
-	SIZE_160X120	= 0,
-	SIZE_160X136	= 1,
-	SIZE_176X144	= 2,
-	SIZE_320X240	= 3,
-
-};
-
-#define MAX_FRAME_SIZE	SIZE_320X240
-
-static struct usbvideo *cams;
-
-#ifdef CONFIG_USB_DEBUG
-static int debug;
-#define DEBUG(n, format, arg...) \
-	if (n <= debug) {	 \
-		printk(KERN_DEBUG __FILE__ ":%s(): " format "\n", __func__ , ## arg); \
-	}
-#else
-#define DEBUG(n, arg...)
-static const int debug;
-#endif
-
-
-/* Some default values for initial camera settings,
-   can be set by modprobe */
-
-static int size;
-static int speed = 6;		/* Speed (fps) 0 (slowest) to 6 (fastest) */
-static int brightness =	MAX_BRIGHTNESS/2;
-static int contrast =	MAX_CONTRAST/2;
-static int saturation =	MAX_SATURATION/2;
-static int sharpness =	MAX_SHARPNESS/2;
-static int whitebal =	3*(MAX_WHITEBAL/4);
-
-static const int spd_to_iface[] = { 1, 0, 3, 2, 4, 5, 6 };
-
-/* These FPS speeds are from the windows config box. They are
- * indexed on size (0-2) and speed (0-6). Divide by 3 to get the
- * real fps.
- */
-
-static const int spd_to_fps[][7] = { { 24, 40, 48, 60, 72, 80, 100 },
-			       { 24, 40, 48, 60, 72, 80, 100 },
-			       { 18, 30, 36, 45, 54, 60, 75  },
-			       { 6,  10, 12, 15, 18, 21, 25  } };
-
-struct cam_size {
-	u16	width;
-	u16	height;
-	u8	cmd;
-};
-
-static const struct cam_size camera_sizes[] = { { 160, 120, 0x7 },
-					  { 160, 136, 0xa },
-					  { 176, 144, 0x4 },
-					  { 320, 240, 0x5 } };
-
-struct konicawc {
-	u8 brightness;		/* camera uses 0 - 9, x11 for real value */
-	u8 contrast;		/* as above */
-	u8 saturation;		/* as above */
-	u8 sharpness;		/* as above */
-	u8 white_bal;		/* 0 - 33, x11 for real value */
-	u8 speed;		/* Stored as 0 - 6, used as index in spd_to_* (above) */
-	u8 size;		/* Frame Size */
-	int height;
-	int width;
-	struct urb *sts_urb[USBVIDEO_NUMSBUF];
-	u8 sts_buf[USBVIDEO_NUMSBUF][FRAMES_PER_DESC];
-	struct urb *last_data_urb;
-	int lastframe;
-	int cur_frame_size;	/* number of bytes in current frame size */
-	int maxline;		/* number of lines per frame */
-	int yplanesz;		/* Number of bytes in the Y plane */
-	unsigned int buttonsts:1;
-#ifdef CONFIG_INPUT
-	struct input_dev *input;
-	char input_physname[64];
-#endif
-};
-
-
-#define konicawc_set_misc(uvd, req, value, index)		konicawc_ctrl_msg(uvd, USB_DIR_OUT, req, value, index, NULL, 0)
-#define konicawc_get_misc(uvd, req, value, index, buf, sz)	konicawc_ctrl_msg(uvd, USB_DIR_IN, req, value, index, buf, sz)
-#define konicawc_set_value(uvd, value, index)			konicawc_ctrl_msg(uvd, USB_DIR_OUT, 2, value, index, NULL, 0)
-
-
-static int konicawc_ctrl_msg(struct uvd *uvd, u8 dir, u8 request, u16 value, u16 index, void *buf, int len)
-{
-	int retval = usb_control_msg(uvd->dev,
-		dir ? usb_rcvctrlpipe(uvd->dev, 0) : usb_sndctrlpipe(uvd->dev, 0),
-		    request, 0x40 | dir, value, index, buf, len, 1000);
-	return retval < 0 ? retval : 0;
-}
-
-
-static inline void konicawc_camera_on(struct uvd *uvd)
-{
-	DEBUG(0, "camera on");
-	konicawc_set_misc(uvd, 0x2, 1, 0x0b);
-}
-
-
-static inline void konicawc_camera_off(struct uvd *uvd)
-{
-	DEBUG(0, "camera off");
-	konicawc_set_misc(uvd, 0x2, 0, 0x0b);
-}
-
-
-static void konicawc_set_camera_size(struct uvd *uvd)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	konicawc_set_misc(uvd, 0x2, camera_sizes[cam->size].cmd, 0x08);
-	cam->width = camera_sizes[cam->size].width;
-	cam->height = camera_sizes[cam->size].height;
-	cam->yplanesz = cam->height * cam->width;
-	cam->cur_frame_size = (cam->yplanesz * 3) / 2;
-	cam->maxline = cam->yplanesz / 256;
-	uvd->videosize = VIDEOSIZE(cam->width, cam->height);
-}
-
-
-static int konicawc_setup_on_open(struct uvd *uvd)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	DEBUG(1, "setting brightness to %d (%d)", cam->brightness,
-	    cam->brightness * 11);
-	konicawc_set_value(uvd, cam->brightness, SetBrightness);
-	DEBUG(1, "setting white balance to %d (%d)", cam->white_bal,
-	    cam->white_bal * 11);
-	konicawc_set_value(uvd, cam->white_bal, SetWhitebal);
-	DEBUG(1, "setting contrast to %d (%d)", cam->contrast,
-	    cam->contrast * 11);
-	konicawc_set_value(uvd, cam->contrast, SetContrast);
-	DEBUG(1, "setting saturation to %d (%d)", cam->saturation,
-	    cam->saturation * 11);
-	konicawc_set_value(uvd, cam->saturation, SetSaturation);
-	DEBUG(1, "setting sharpness to %d (%d)", cam->sharpness,
-	    cam->sharpness * 11);
-	konicawc_set_value(uvd, cam->sharpness, SetSharpness);
-	konicawc_set_camera_size(uvd);
-	cam->lastframe = -2;
-	cam->buttonsts = 0;
-	return 0;
-}
-
-
-static void konicawc_adjust_picture(struct uvd *uvd)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	konicawc_camera_off(uvd);
-	DEBUG(1, "new brightness: %d", uvd->vpic.brightness);
-	uvd->vpic.brightness = (uvd->vpic.brightness > MAX_BRIGHTNESS) ? MAX_BRIGHTNESS : uvd->vpic.brightness;
-	if(cam->brightness != uvd->vpic.brightness / 11) {
-	   cam->brightness = uvd->vpic.brightness / 11;
-	   DEBUG(1, "setting brightness to %d (%d)", cam->brightness,
-	       cam->brightness * 11);
-	   konicawc_set_value(uvd, cam->brightness, SetBrightness);
-	}
-
-	DEBUG(1, "new contrast: %d", uvd->vpic.contrast);
-	uvd->vpic.contrast = (uvd->vpic.contrast > MAX_CONTRAST) ? MAX_CONTRAST : uvd->vpic.contrast;
-	if(cam->contrast != uvd->vpic.contrast / 11) {
-		cam->contrast = uvd->vpic.contrast / 11;
-		DEBUG(1, "setting contrast to %d (%d)", cam->contrast,
-		    cam->contrast * 11);
-		konicawc_set_value(uvd, cam->contrast, SetContrast);
-	}
-	konicawc_camera_on(uvd);
-}
-
-#ifdef CONFIG_INPUT
-
-static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev)
-{
-	struct input_dev *input_dev;
-	int error;
-
-	usb_make_path(dev, cam->input_physname, sizeof(cam->input_physname));
-	strlcat(cam->input_physname, "/input0", sizeof(cam->input_physname));
-
-	cam->input = input_dev = input_allocate_device();
-	if (!input_dev) {
-		dev_warn(&dev->dev,
-			 "Not enough memory for camera's input device\n");
-		return;
-	}
-
-	input_dev->name = "Konicawc snapshot button";
-	input_dev->phys = cam->input_physname;
-	usb_to_input_id(dev, &input_dev->id);
-	input_dev->dev.parent = &dev->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY);
-	input_dev->keybit[BIT_WORD(KEY_CAMERA)] = BIT_MASK(KEY_CAMERA);
-
-	error = input_register_device(cam->input);
-	if (error) {
-		dev_warn(&dev->dev,
-			 "Failed to register camera's input device, err: %d\n",
-			 error);
-		input_free_device(cam->input);
-		cam->input = NULL;
-	}
-}
-
-static void konicawc_unregister_input(struct konicawc *cam)
-{
-	if (cam->input) {
-		input_unregister_device(cam->input);
-		cam->input = NULL;
-	}
-}
-
-static void konicawc_report_buttonstat(struct konicawc *cam)
-{
-	if (cam->input) {
-		input_report_key(cam->input, KEY_CAMERA, cam->buttonsts);
-		input_sync(cam->input);
-	}
-}
-
-#else
-
-static inline void konicawc_register_input(struct konicawc *cam, struct usb_device *dev) { }
-static inline void konicawc_unregister_input(struct konicawc *cam) { }
-static inline void konicawc_report_buttonstat(struct konicawc *cam) { }
-
-#endif /* CONFIG_INPUT */
-
-static int konicawc_compress_iso(struct uvd *uvd, struct urb *dataurb, struct urb *stsurb)
-{
-	char *cdata;
-	int i, totlen = 0;
-	unsigned char *status = stsurb->transfer_buffer;
-	int keep = 0, discard = 0, bad = 0;
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	for (i = 0; i < dataurb->number_of_packets; i++) {
-		int button = cam->buttonsts;
-		unsigned char sts;
-		int n = dataurb->iso_frame_desc[i].actual_length;
-		int st = dataurb->iso_frame_desc[i].status;
-		cdata = dataurb->transfer_buffer +
-			dataurb->iso_frame_desc[i].offset;
-
-		/* Detect and ignore errored packets */
-		if (st < 0) {
-			DEBUG(1, "Data error: packet=%d. len=%d. status=%d.",
-			      i, n, st);
-			uvd->stats.iso_err_count++;
-			continue;
-		}
-
-		/* Detect and ignore empty packets */
-		if (n <= 0) {
-			uvd->stats.iso_skip_count++;
-			continue;
-		}
-
-		/* See what the status data said about the packet */
-		sts = *(status+stsurb->iso_frame_desc[i].offset);
-
-		/* sts: 0x80-0xff: frame start with frame number (ie 0-7f)
-		 * otherwise:
-		 * bit 0 0: keep packet
-		 *	 1: drop packet (padding data)
-		 *
-		 * bit 4 0 button not clicked
-		 *       1 button clicked
-		 * button is used to `take a picture' (in software)
-		 */
-
-		if(sts < 0x80) {
-			button = !!(sts & 0x40);
-			sts &= ~0x40;
-		}
-
-		/* work out the button status, but don't do
-		   anything with it for now */
-
-		if(button != cam->buttonsts) {
-			DEBUG(2, "button: %sclicked", button ? "" : "un");
-			cam->buttonsts = button;
-			konicawc_report_buttonstat(cam);
-		}
-
-		if(sts == 0x01) { /* drop frame */
-			discard++;
-			continue;
-		}
-
-		if((sts > 0x01) && (sts < 0x80)) {
-			dev_info(&uvd->dev->dev, "unknown status %2.2x\n",
-				 sts);
-			bad++;
-			continue;
-		}
-		if(!sts && cam->lastframe == -2) {
-			DEBUG(2, "dropping frame looking for image start");
-			continue;
-		}
-
-		keep++;
-		if(sts & 0x80) { /* frame start */
-			unsigned char marker[] = { 0, 0xff, 0, 0x00 };
-
-			if(cam->lastframe == -2) {
-				DEBUG(2, "found initial image");
-				cam->lastframe = -1;
-			}
-
-			marker[3] = sts & 0x7F;
-			RingQueue_Enqueue(&uvd->dp, marker, 4);
-			totlen += 4;
-		}
-
-		totlen += n;	/* Little local accounting */
-		RingQueue_Enqueue(&uvd->dp, cdata, n);
-	}
-	DEBUG(8, "finished: keep = %d discard = %d bad = %d added %d bytes",
-		    keep, discard, bad, totlen);
-	return totlen;
-}
-
-
-static void resubmit_urb(struct uvd *uvd, struct urb *urb)
-{
-	int i, ret;
-	for (i = 0; i < FRAMES_PER_DESC; i++) {
-		urb->iso_frame_desc[i].status = 0;
-	}
-	urb->dev = uvd->dev;
-	urb->status = 0;
-	ret = usb_submit_urb(urb, GFP_ATOMIC);
-	DEBUG(3, "submitting urb of length %d", urb->transfer_buffer_length);
-	if(ret)
-		err("usb_submit_urb error (%d)", ret);
-
-}
-
-
-static void konicawc_isoc_irq(struct urb *urb)
-{
-	struct uvd *uvd = urb->context;
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	/* We don't want to do anything if we are about to be removed! */
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return;
-
-	if (!uvd->streaming) {
-		DEBUG(1, "Not streaming, but interrupt!");
-		return;
-	}
-
-	DEBUG(3, "got frame %d len = %d buflen =%d", urb->start_frame, urb->actual_length, urb->transfer_buffer_length);
-
-	uvd->stats.urb_count++;
-
-	if (urb->transfer_buffer_length > 32) {
-		cam->last_data_urb = urb;
-		return;
-	}
-	/* Copy the data received into ring queue */
-	if(cam->last_data_urb) {
-		int len = 0;
-		if(urb->start_frame != cam->last_data_urb->start_frame)
-			err("Lost sync on frames");
-		else if (!urb->status && !cam->last_data_urb->status)
-			len = konicawc_compress_iso(uvd, cam->last_data_urb, urb);
-
-		resubmit_urb(uvd, cam->last_data_urb);
-		resubmit_urb(uvd, urb);
-		cam->last_data_urb = NULL;
-		uvd->stats.urb_length = len;
-		uvd->stats.data_count += len;
-		if(len)
-			RingQueue_WakeUpInterruptible(&uvd->dp);
-		return;
-	}
-	return;
-}
-
-
-static int konicawc_start_data(struct uvd *uvd)
-{
-	struct usb_device *dev = uvd->dev;
-	int i, errFlag;
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-	int pktsz;
-	struct usb_interface *intf;
-	struct usb_host_interface *interface = NULL;
-
-	intf = usb_ifnum_to_if(dev, uvd->iface);
-	if (intf)
-		interface = usb_altnum_to_altsetting(intf,
-				spd_to_iface[cam->speed]);
-	if (!interface)
-		return -ENXIO;
-	pktsz = le16_to_cpu(interface->endpoint[1].desc.wMaxPacketSize);
-	DEBUG(1, "pktsz = %d", pktsz);
-	if (!CAMERA_IS_OPERATIONAL(uvd)) {
-		err("Camera is not operational");
-		return -EFAULT;
-	}
-	uvd->curframe = -1;
-	konicawc_camera_on(uvd);
-	/* Alternate interface 1 is is the biggest frame size */
-	i = usb_set_interface(dev, uvd->iface, uvd->ifaceAltActive);
-	if (i < 0) {
-		err("usb_set_interface error");
-		uvd->last_error = i;
-		return -EBUSY;
-	}
-
-	/* We double buffer the Iso lists */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		int j, k;
-		struct urb *urb = uvd->sbuf[i].urb;
-		urb->dev = dev;
-		urb->context = uvd;
-		urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp);
-		urb->interval = 1;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->transfer_buffer = uvd->sbuf[i].data;
-		urb->complete = konicawc_isoc_irq;
-		urb->number_of_packets = FRAMES_PER_DESC;
-		urb->transfer_buffer_length = pktsz * FRAMES_PER_DESC;
-		for (j=k=0; j < FRAMES_PER_DESC; j++, k += pktsz) {
-			urb->iso_frame_desc[j].offset = k;
-			urb->iso_frame_desc[j].length = pktsz;
-		}
-
-		urb = cam->sts_urb[i];
-		urb->dev = dev;
-		urb->context = uvd;
-		urb->pipe = usb_rcvisocpipe(dev, uvd->video_endp-1);
-		urb->interval = 1;
-		urb->transfer_flags = URB_ISO_ASAP;
-		urb->transfer_buffer = cam->sts_buf[i];
-		urb->complete = konicawc_isoc_irq;
-		urb->number_of_packets = FRAMES_PER_DESC;
-		urb->transfer_buffer_length = FRAMES_PER_DESC;
-		for (j=0; j < FRAMES_PER_DESC; j++) {
-			urb->iso_frame_desc[j].offset = j;
-			urb->iso_frame_desc[j].length = 1;
-		}
-	}
-
-	cam->last_data_urb = NULL;
-
-	/* Submit all URBs */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		errFlag = usb_submit_urb(cam->sts_urb[i], GFP_KERNEL);
-		if (errFlag)
-			err("usb_submit_isoc(%d) ret %d", i, errFlag);
-
-		errFlag = usb_submit_urb(uvd->sbuf[i].urb, GFP_KERNEL);
-		if (errFlag)
-			err ("usb_submit_isoc(%d) ret %d", i, errFlag);
-	}
-
-	uvd->streaming = 1;
-	DEBUG(1, "streaming=1 video_endp=$%02x", uvd->video_endp);
-	return 0;
-}
-
-
-static void konicawc_stop_data(struct uvd *uvd)
-{
-	int i, j;
-	struct konicawc *cam;
-
-	if ((uvd == NULL) || (!uvd->streaming) || (uvd->dev == NULL))
-		return;
-
-	konicawc_camera_off(uvd);
-	uvd->streaming = 0;
-	cam = (struct konicawc *)uvd->user_data;
-	cam->last_data_urb = NULL;
-
-	/* Unschedule all of the iso td's */
-	for (i=0; i < USBVIDEO_NUMSBUF; i++) {
-		usb_kill_urb(uvd->sbuf[i].urb);
-		usb_kill_urb(cam->sts_urb[i]);
-	}
-
-	if (!uvd->remove_pending) {
-		/* Set packet size to 0 */
-		j = usb_set_interface(uvd->dev, uvd->iface, uvd->ifaceAltInactive);
-		if (j < 0) {
-			err("usb_set_interface() error %d.", j);
-			uvd->last_error = j;
-		}
-	}
-}
-
-
-static void konicawc_process_isoc(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-	int maxline = cam->maxline;
-	int yplanesz = cam->yplanesz;
-
-	assert(frame != NULL);
-
-	DEBUG(5, "maxline = %d yplanesz = %d", maxline, yplanesz);
-	DEBUG(3, "Frame state = %d", frame->scanstate);
-
-	if(frame->scanstate == ScanState_Scanning) {
-		int drop = 0;
-		int curframe;
-		int fdrops = 0;
-		DEBUG(3, "Searching for marker, queue len = %d", RingQueue_GetLength(&uvd->dp));
-		while(RingQueue_GetLength(&uvd->dp) >= 4) {
-			if ((RING_QUEUE_PEEK(&uvd->dp, 0) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 1) == 0xff) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 2) == 0x00) &&
-			    (RING_QUEUE_PEEK(&uvd->dp, 3) < 0x80)) {
-				curframe = RING_QUEUE_PEEK(&uvd->dp, 3);
-				if(cam->lastframe >= 0) {
-					fdrops = (0x80 + curframe - cam->lastframe) & 0x7F;
-					fdrops--;
-					if(fdrops) {
-						dev_info(&uvd->dev->dev,
-							 "Dropped %d frames "
-							 "(%d -> %d)\n",
-							 fdrops,
-							 cam->lastframe,
-							 curframe);
-					}
-				}
-				cam->lastframe = curframe;
-				frame->curline = 0;
-				frame->scanstate = ScanState_Lines;
-				RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 4);
-				break;
-			}
-			RING_QUEUE_DEQUEUE_BYTES(&uvd->dp, 1);
-			drop++;
-		}
-		if(drop)
-			DEBUG(2, "dropped %d bytes looking for new frame", drop);
-	}
-
-	if(frame->scanstate == ScanState_Scanning)
-		return;
-
-	/* Try to move data from queue into frame buffer
-	 * We get data in blocks of 384 bytes made up of:
-	 * 256 Y, 64 U, 64 V.
-	 * This needs to be written out as a Y plane, a U plane and a V plane.
-	 */
-
-	while ( frame->curline < maxline && (RingQueue_GetLength(&uvd->dp) >= 384)) {
-		/* Y */
-		RingQueue_Dequeue(&uvd->dp, frame->data + (frame->curline * 256), 256);
-		/* U */
-		RingQueue_Dequeue(&uvd->dp, frame->data + yplanesz + (frame->curline * 64), 64);
-		/* V */
-		RingQueue_Dequeue(&uvd->dp, frame->data + (5 * yplanesz)/4 + (frame->curline * 64), 64);
-		frame->seqRead_Length += 384;
-		frame->curline++;
-	}
-	/* See if we filled the frame */
-	if (frame->curline == maxline) {
-		DEBUG(5, "got whole frame");
-
-		frame->frameState = FrameState_Done_Hold;
-		frame->curline = 0;
-		uvd->curframe = -1;
-		uvd->stats.frame_num++;
-	}
-}
-
-
-static int konicawc_find_fps(int size, int fps)
-{
-	int i;
-
-	fps *= 3;
-	DEBUG(1, "konica_find_fps: size = %d fps = %d", size, fps);
-	if(fps <= spd_to_fps[size][0])
-		return 0;
-
-	if(fps >= spd_to_fps[size][MAX_SPEED])
-		return MAX_SPEED;
-
-	for(i = 0; i < MAX_SPEED; i++) {
-		if((fps >= spd_to_fps[size][i]) && (fps <= spd_to_fps[size][i+1])) {
-			DEBUG(2, "fps %d between %d and %d", fps, i, i+1);
-			if( (fps - spd_to_fps[size][i]) < (spd_to_fps[size][i+1] - fps))
-				return i;
-			else
-				return i+1;
-		}
-	}
-	return MAX_SPEED+1;
-}
-
-
-static int konicawc_set_video_mode(struct uvd *uvd, struct video_window *vw)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-	int newspeed = cam->speed;
-	int newsize;
-	int x = vw->width;
-	int y = vw->height;
-	int fps = vw->flags;
-
-	if(x > 0 && y > 0) {
-		DEBUG(2, "trying to find size %d,%d", x, y);
-		for(newsize = 0; newsize <= MAX_FRAME_SIZE; newsize++) {
-			if((camera_sizes[newsize].width == x) && (camera_sizes[newsize].height == y))
-				break;
-		}
-	} else {
-		newsize = cam->size;
-	}
-
-	if(newsize > MAX_FRAME_SIZE) {
-		DEBUG(1, "couldn't find size %d,%d", x, y);
-		return -EINVAL;
-	}
-
-	if(fps > 0) {
-		DEBUG(1, "trying to set fps to %d", fps);
-		newspeed = konicawc_find_fps(newsize, fps);
-		DEBUG(1, "find_fps returned %d (%d)", newspeed, spd_to_fps[newsize][newspeed]);
-	}
-
-	if(newspeed > MAX_SPEED)
-		return -EINVAL;
-
-	DEBUG(1, "setting size to %d speed to %d", newsize, newspeed);
-	if((newsize == cam->size) && (newspeed == cam->speed)) {
-		DEBUG(1, "Nothing to do");
-		return 0;
-	}
-	DEBUG(0, "setting to  %dx%d @ %d fps", camera_sizes[newsize].width,
-	     camera_sizes[newsize].height, spd_to_fps[newsize][newspeed]/3);
-
-	konicawc_stop_data(uvd);
-	uvd->ifaceAltActive = spd_to_iface[newspeed];
-	DEBUG(1, "new interface = %d", uvd->ifaceAltActive);
-	cam->speed = newspeed;
-
-	if(cam->size != newsize) {
-		cam->size = newsize;
-		konicawc_set_camera_size(uvd);
-	}
-
-	/* Flush the input queue and clear any current frame in progress */
-
-	RingQueue_Flush(&uvd->dp);
-	cam->lastframe = -2;
-	if(uvd->curframe != -1) {
-		uvd->frame[uvd->curframe].curline = 0;
-		uvd->frame[uvd->curframe].seqRead_Length = 0;
-		uvd->frame[uvd->curframe].seqRead_Index = 0;
-	}
-
-	konicawc_start_data(uvd);
-	return 0;
-}
-
-
-static int konicawc_calculate_fps(struct uvd *uvd)
-{
-	struct konicawc *cam = uvd->user_data;
-	return spd_to_fps[cam->size][cam->speed]/3;
-}
-
-
-static void konicawc_configure_video(struct uvd *uvd)
-{
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-	u8 buf[2];
-
-	memset(&uvd->vpic, 0, sizeof(uvd->vpic));
-	memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
-
-	RESTRICT_TO_RANGE(brightness, 0, MAX_BRIGHTNESS);
-	RESTRICT_TO_RANGE(contrast, 0, MAX_CONTRAST);
-	RESTRICT_TO_RANGE(saturation, 0, MAX_SATURATION);
-	RESTRICT_TO_RANGE(sharpness, 0, MAX_SHARPNESS);
-	RESTRICT_TO_RANGE(whitebal, 0, MAX_WHITEBAL);
-
-	cam->brightness = brightness / 11;
-	cam->contrast = contrast / 11;
-	cam->saturation = saturation / 11;
-	cam->sharpness = sharpness / 11;
-	cam->white_bal = whitebal / 11;
-
-	uvd->vpic.colour = 108;
-	uvd->vpic.hue = 108;
-	uvd->vpic.brightness = brightness;
-	uvd->vpic.contrast = contrast;
-	uvd->vpic.whiteness = whitebal;
-	uvd->vpic.depth = 6;
-	uvd->vpic.palette = VIDEO_PALETTE_YUV420P;
-
-	memset(&uvd->vcap, 0, sizeof(uvd->vcap));
-	strcpy(uvd->vcap.name, "Konica Webcam");
-	uvd->vcap.type = VID_TYPE_CAPTURE;
-	uvd->vcap.channels = 1;
-	uvd->vcap.audios = 0;
-	uvd->vcap.minwidth = camera_sizes[SIZE_160X120].width;
-	uvd->vcap.minheight = camera_sizes[SIZE_160X120].height;
-	uvd->vcap.maxwidth = camera_sizes[SIZE_320X240].width;
-	uvd->vcap.maxheight = camera_sizes[SIZE_320X240].height;
-
-	memset(&uvd->vchan, 0, sizeof(uvd->vchan));
-	uvd->vchan.flags = 0 ;
-	uvd->vchan.tuners = 0;
-	uvd->vchan.channel = 0;
-	uvd->vchan.type = VIDEO_TYPE_CAMERA;
-	strcpy(uvd->vchan.name, "Camera");
-
-	/* Talk to device */
-	DEBUG(1, "device init");
-	if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2))
-		DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]);
-	if(!konicawc_get_misc(uvd, 0x3, 0, 0x10, buf, 2))
-		DEBUG(2, "3,10 -> %2.2x %2.2x", buf[0], buf[1]);
-	if(konicawc_set_misc(uvd, 0x2, 0, 0xd))
-		DEBUG(2, "2,0,d failed");
-	DEBUG(1, "setting initial values");
-}
-
-static int konicawc_probe(struct usb_interface *intf, const struct usb_device_id *devid)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct uvd *uvd = NULL;
-	int ix, i, nas;
-	int actInterface=-1, inactInterface=-1, maxPS=0;
-	unsigned char video_ep = 0;
-
-	DEBUG(1, "konicawc_probe(%p)", intf);
-
-	/* We don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	dev_info(&intf->dev, "Konica Webcam (rev. 0x%04x)\n",
-		 le16_to_cpu(dev->descriptor.bcdDevice));
-	RESTRICT_TO_RANGE(speed, 0, MAX_SPEED);
-
-	/* Validate found interface: must have one ISO endpoint */
-	nas = intf->num_altsetting;
-	if (nas != 8) {
-		err("Incorrect number of alternate settings (%d) for this camera!", nas);
-		return -ENODEV;
-	}
-	/* Validate all alternate settings */
-	for (ix=0; ix < nas; ix++) {
-		const struct usb_host_interface *interface;
-		const struct usb_endpoint_descriptor *endpoint;
-
-		interface = &intf->altsetting[ix];
-		i = interface->desc.bAlternateSetting;
-		if (interface->desc.bNumEndpoints != 2) {
-			err("Interface %d. has %u. endpoints!",
-			    interface->desc.bInterfaceNumber,
-			    (unsigned)(interface->desc.bNumEndpoints));
-			return -ENODEV;
-		}
-		endpoint = &interface->endpoint[1].desc;
-		DEBUG(1, "found endpoint: addr: 0x%2.2x maxps = 0x%4.4x",
-		    endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize));
-		if (video_ep == 0)
-			video_ep = endpoint->bEndpointAddress;
-		else if (video_ep != endpoint->bEndpointAddress) {
-			err("Alternate settings have different endpoint addresses!");
-			return -ENODEV;
-		}
-		if (!usb_endpoint_xfer_isoc(endpoint)) {
-			err("Interface %d. has non-ISO endpoint!",
-			    interface->desc.bInterfaceNumber);
-			return -ENODEV;
-		}
-		if (usb_endpoint_dir_out(endpoint)) {
-			err("Interface %d. has ISO OUT endpoint!",
-			    interface->desc.bInterfaceNumber);
-			return -ENODEV;
-		}
-		if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) {
-			if (inactInterface < 0)
-				inactInterface = i;
-			else {
-				err("More than one inactive alt. setting!");
-				return -ENODEV;
-			}
-		} else {
-			if (i == spd_to_iface[speed]) {
-				/* This one is the requested one */
-				actInterface = i;
-			}
-		}
-		if (le16_to_cpu(endpoint->wMaxPacketSize) > maxPS)
-			maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
-	}
-	if(actInterface == -1) {
-		err("Cant find required endpoint");
-		return -ENODEV;
-	}
-
-	DEBUG(1, "Selecting requested active setting=%d. maxPS=%d.", actInterface, maxPS);
-
-	uvd = usbvideo_AllocateDevice(cams);
-	if (uvd != NULL) {
-		struct konicawc *cam = (struct konicawc *)(uvd->user_data);
-		/* Here uvd is a fully allocated uvd object */
-		for(i = 0; i < USBVIDEO_NUMSBUF; i++) {
-			cam->sts_urb[i] = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
-			if(cam->sts_urb[i] == NULL) {
-				while(i--) {
-					usb_free_urb(cam->sts_urb[i]);
-				}
-				err("can't allocate urbs");
-				return -ENOMEM;
-			}
-		}
-		cam->speed = speed;
-		RESTRICT_TO_RANGE(size, SIZE_160X120, SIZE_320X240);
-		cam->width = camera_sizes[size].width;
-		cam->height = camera_sizes[size].height;
-		cam->size = size;
-
-		uvd->flags = 0;
-		uvd->debug = debug;
-		uvd->dev = dev;
-		uvd->iface = intf->altsetting->desc.bInterfaceNumber;
-		uvd->ifaceAltInactive = inactInterface;
-		uvd->ifaceAltActive = actInterface;
-		uvd->video_endp = video_ep;
-		uvd->iso_packet_len = maxPS;
-		uvd->paletteBits = 1L << VIDEO_PALETTE_YUV420P;
-		uvd->defaultPalette = VIDEO_PALETTE_YUV420P;
-		uvd->canvas = VIDEOSIZE(320, 240);
-		uvd->videosize = VIDEOSIZE(cam->width, cam->height);
-
-		/* Initialize konicawc specific data */
-		konicawc_configure_video(uvd);
-
-		i = usbvideo_RegisterVideoDevice(uvd);
-		uvd->max_frame_size = (320 * 240 * 3)/2;
-		if (i != 0) {
-			err("usbvideo_RegisterVideoDevice() failed.");
-			uvd = NULL;
-		}
-
-		konicawc_register_input(cam, dev);
-	}
-
-	if (uvd) {
-		usb_set_intfdata (intf, uvd);
-		return 0;
-	}
-	return -EIO;
-}
-
-
-static void konicawc_free_uvd(struct uvd *uvd)
-{
-	int i;
-	struct konicawc *cam = (struct konicawc *)uvd->user_data;
-
-	konicawc_unregister_input(cam);
-
-	for (i = 0; i < USBVIDEO_NUMSBUF; i++) {
-		usb_free_urb(cam->sts_urb[i]);
-		cam->sts_urb[i] = NULL;
-	}
-}
-
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(0x04c8, 0x0720) }, /* Intel YC 76 */
-	{ }  /* Terminating entry */
-};
-
-
-static int __init konicawc_init(void)
-{
-	struct usbvideo_cb cbTbl;
-	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
-	       DRIVER_DESC "\n");
-	memset(&cbTbl, 0, sizeof(cbTbl));
-	cbTbl.probe = konicawc_probe;
-	cbTbl.setupOnOpen = konicawc_setup_on_open;
-	cbTbl.processData = konicawc_process_isoc;
-	cbTbl.getFPS = konicawc_calculate_fps;
-	cbTbl.setVideoMode = konicawc_set_video_mode;
-	cbTbl.startDataPump = konicawc_start_data;
-	cbTbl.stopDataPump = konicawc_stop_data;
-	cbTbl.adjustPicture = konicawc_adjust_picture;
-	cbTbl.userFree = konicawc_free_uvd;
-	return usbvideo_register(
-		&cams,
-		MAX_CAMERAS,
-		sizeof(struct konicawc),
-		"konicawc",
-		&cbTbl,
-		THIS_MODULE,
-		id_table);
-}
-
-
-static void __exit konicawc_cleanup(void)
-{
-	usbvideo_Deregister(&cams);
-}
-
-
-MODULE_DEVICE_TABLE(usb, id_table);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Simon Evans <spse@secret.org.uk>");
-MODULE_DESCRIPTION(DRIVER_DESC);
-module_param(speed, int, 0);
-MODULE_PARM_DESC(speed, "Initial speed: 0 (slowest) - 6 (fastest)");
-module_param(size, int, 0);
-MODULE_PARM_DESC(size, "Initial Size 0: 160x120 1: 160x136 2: 176x144 3: 320x240");
-module_param(brightness, int, 0);
-MODULE_PARM_DESC(brightness, "Initial brightness 0 - 108");
-module_param(contrast, int, 0);
-MODULE_PARM_DESC(contrast, "Initial contrast 0 - 108");
-module_param(saturation, int, 0);
-MODULE_PARM_DESC(saturation, "Initial saturation 0 - 108");
-module_param(sharpness, int, 0);
-MODULE_PARM_DESC(sharpness, "Initial brightness 0 - 108");
-module_param(whitebal, int, 0);
-MODULE_PARM_DESC(whitebal, "Initial white balance 0 - 363");
-
-#ifdef CONFIG_USB_DEBUG
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
-#endif
-
-module_init(konicawc_init);
-module_exit(konicawc_cleanup);
diff --git a/drivers/media/video/usbvideo/ultracam.c b/drivers/media/video/usbvideo/ultracam.c
deleted file mode 100644
index fbd1b639229..00000000000
--- a/drivers/media/video/usbvideo/ultracam.c
+++ /dev/null
@@ -1,685 +0,0 @@
-/*
- * USB NB Camera driver
- *
- * HISTORY:
- * 25-Dec-2002 Dmitri      Removed lighting, sharpness parameters, methods.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include "usbvideo.h"
-
-#define	ULTRACAM_VENDOR_ID	0x0461
-#define	ULTRACAM_PRODUCT_ID	0x0813
-
-#define MAX_CAMERAS		4	/* How many devices we allow to connect */
-
-/*
- * This structure lives in uvd_t->user field.
- */
-typedef struct {
-	int initialized;	/* Had we already sent init sequence? */
-	int camera_model;	/* What type of IBM camera we got? */
-	int has_hdr;
-} ultracam_t;
-#define	ULTRACAM_T(uvd)	((ultracam_t *)((uvd)->user_data))
-
-static struct usbvideo *cams = NULL;
-
-static int debug;
-
-static int flags; /* FLAGS_DISPLAY_HINTS | FLAGS_OVERLAY_STATS; */
-
-static const int min_canvasWidth  = 8;
-static const int min_canvasHeight = 4;
-
-#define FRAMERATE_MIN	0
-#define FRAMERATE_MAX	6
-static int framerate = -1;
-
-/*
- * Here we define several initialization variables. They may
- * be used to automatically set color, hue, brightness and
- * contrast to desired values. This is particularly useful in
- * case of webcams (which have no controls and no on-screen
- * output) and also when a client V4L software is used that
- * does not have some of those controls. In any case it's
- * good to have startup values as options.
- *
- * These values are all in [0..255] range. This simplifies
- * operation. Note that actual values of V4L variables may
- * be scaled up (as much as << 8). User can see that only
- * on overlay output, however, or through a V4L client.
- */
-static int init_brightness = 128;
-static int init_contrast = 192;
-static int init_color = 128;
-static int init_hue = 128;
-static int hue_correction = 128;
-
-module_param(debug, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Debug level: 0-9 (default=0)");
-module_param(flags, int, 0);
-MODULE_PARM_DESC(flags,
-		"Bitfield: 0=VIDIOCSYNC, "
-		"1=B/W, "
-		"2=show hints, "
-		"3=show stats, "
-		"4=test pattern, "
-		"5=separate frames, "
-		"6=clean frames");
-module_param(framerate, int, 0);
-MODULE_PARM_DESC(framerate, "Framerate setting: 0=slowest, 6=fastest (default=2)");
-
-module_param(init_brightness, int, 0);
-MODULE_PARM_DESC(init_brightness, "Brightness preconfiguration: 0-255 (default=128)");
-module_param(init_contrast, int, 0);
-MODULE_PARM_DESC(init_contrast, "Contrast preconfiguration: 0-255 (default=192)");
-module_param(init_color, int, 0);
-MODULE_PARM_DESC(init_color, "Color preconfiguration: 0-255 (default=128)");
-module_param(init_hue, int, 0);
-MODULE_PARM_DESC(init_hue, "Hue preconfiguration: 0-255 (default=128)");
-module_param(hue_correction, int, 0);
-MODULE_PARM_DESC(hue_correction, "YUV colorspace regulation: 0-255 (default=128)");
-
-/*
- * ultracam_ProcessIsocData()
- *
- * Generic routine to parse the ring queue data. It employs either
- * ultracam_find_header() or ultracam_parse_lines() to do most
- * of work.
- *
- * 02-Nov-2000 First (mostly dummy) version.
- * 06-Nov-2000 Rewrote to dump all data into frame.
- */
-static void ultracam_ProcessIsocData(struct uvd *uvd, struct usbvideo_frame *frame)
-{
-	int n;
-
-	assert(uvd != NULL);
-	assert(frame != NULL);
-
-	/* Try to move data from queue into frame buffer */
-	n = RingQueue_GetLength(&uvd->dp);
-	if (n > 0) {
-		int m;
-		/* See how much spare we have left */
-		m = uvd->max_frame_size - frame->seqRead_Length;
-		if (n > m)
-			n = m;
-		/* Now move that much data into frame buffer */
-		RingQueue_Dequeue(
-			&uvd->dp,
-			frame->data + frame->seqRead_Length,
-			m);
-		frame->seqRead_Length += m;
-	}
-	/* See if we filled the frame */
-	if (frame->seqRead_Length >= uvd->max_frame_size) {
-		frame->frameState = FrameState_Done;
-		uvd->curframe = -1;
-		uvd->stats.frame_num++;
-	}
-}
-
-/*
- * ultracam_veio()
- *
- * History:
- * 1/27/00  Added check for dev == NULL; this happens if camera is unplugged.
- */
-static int ultracam_veio(
-	struct uvd *uvd,
-	unsigned char req,
-	unsigned short value,
-	unsigned short index,
-	int is_out)
-{
-	static const char proc[] = "ultracam_veio";
-	unsigned char cp[8] /* = { 0xde, 0xad, 0xbe, 0xef, 0xde, 0xad, 0xbe, 0xef } */;
-	int i;
-
-	if (!CAMERA_IS_OPERATIONAL(uvd))
-		return 0;
-
-	if (!is_out) {
-		i = usb_control_msg(
-			uvd->dev,
-			usb_rcvctrlpipe(uvd->dev, 0),
-			req,
-			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value,
-			index,
-			cp,
-			sizeof(cp),
-			1000);
-#if 1
-		dev_info(&uvd->dev->dev,
-			 "USB => %02x%02x%02x%02x%02x%02x%02x%02x "
-			 "(req=$%02x val=$%04x ind=$%04x)\n",
-			 cp[0],cp[1],cp[2],cp[3],cp[4],cp[5],cp[6],cp[7],
-			 req, value, index);
-#endif
-	} else {
-		i = usb_control_msg(
-			uvd->dev,
-			usb_sndctrlpipe(uvd->dev, 0),
-			req,
-			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value,
-			index,
-			NULL,
-			0,
-			1000);
-	}
-	if (i < 0) {
-		err("%s: ERROR=%d. Camera stopped; Reconnect or reload driver.",
-		    proc, i);
-		uvd->last_error = i;
-	}
-	return i;
-}
-
-/*
- * ultracam_calculate_fps()
- */
-static int ultracam_calculate_fps(struct uvd *uvd)
-{
-	return 3 + framerate*4 + framerate/2;
-}
-
-/*
- * ultracam_adjust_contrast()
- */
-static void ultracam_adjust_contrast(struct uvd *uvd)
-{
-}
-
-/*
- * ultracam_set_brightness()
- *
- * This procedure changes brightness of the picture.
- */
-static void ultracam_set_brightness(struct uvd *uvd)
-{
-}
-
-static void ultracam_set_hue(struct uvd *uvd)
-{
-}
-
-/*
- * ultracam_adjust_picture()
- *
- * This procedure gets called from V4L interface to update picture settings.
- * Here we change brightness and contrast.
- */
-static void ultracam_adjust_picture(struct uvd *uvd)
-{
-	ultracam_adjust_contrast(uvd);
-	ultracam_set_brightness(uvd);
-	ultracam_set_hue(uvd);
-}
-
-/*
- * ultracam_video_stop()
- *
- * This code tells camera to stop streaming. The interface remains
- * configured and bandwidth - claimed.
- */
-static void ultracam_video_stop(struct uvd *uvd)
-{
-}
-
-/*
- * ultracam_reinit_iso()
- *
- * This procedure sends couple of commands to the camera and then
- * resets the video pipe. This sequence was observed to reinit the
- * camera or, at least, to initiate ISO data stream.
- */
-static void ultracam_reinit_iso(struct uvd *uvd, int do_stop)
-{
-}
-
-static void ultracam_video_start(struct uvd *uvd)
-{
-	ultracam_reinit_iso(uvd, 0);
-}
-
-static int ultracam_resetPipe(struct uvd *uvd)
-{
-	usb_clear_halt(uvd->dev, uvd->video_endp);
-	return 0;
-}
-
-static int ultracam_alternateSetting(struct uvd *uvd, int setting)
-{
-	static const char proc[] = "ultracam_alternateSetting";
-	int i;
-	i = usb_set_interface(uvd->dev, uvd->iface, setting);
-	if (i < 0) {
-		err("%s: usb_set_interface error", proc);
-		uvd->last_error = i;
-		return -EBUSY;
-	}
-	return 0;
-}
-
-/*
- * Return negative code on failure, 0 on success.
- */
-static int ultracam_setup_on_open(struct uvd *uvd)
-{
-	int setup_ok = 0; /* Success by default */
-	/* Send init sequence only once, it's large! */
-	if (!ULTRACAM_T(uvd)->initialized) {
-		ultracam_alternateSetting(uvd, 0x04);
-		ultracam_alternateSetting(uvd, 0x00);
-		ultracam_veio(uvd, 0x02, 0x0004, 0x000b, 1);
-		ultracam_veio(uvd, 0x02, 0x0001, 0x0005, 1);
-		ultracam_veio(uvd, 0x02, 0x8000, 0x0000, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0000, 1);
-		ultracam_veio(uvd, 0x00, 0x00b0, 0x0001, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0002, 1);
-		ultracam_veio(uvd, 0x00, 0x000c, 0x0003, 1);
-		ultracam_veio(uvd, 0x00, 0x000b, 0x0004, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0005, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0006, 1);
-		ultracam_veio(uvd, 0x00, 0x0079, 0x0007, 1);
-		ultracam_veio(uvd, 0x00, 0x003b, 0x0008, 1);
-		ultracam_veio(uvd, 0x00, 0x0002, 0x000f, 1);
-		ultracam_veio(uvd, 0x00, 0x0001, 0x0010, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0011, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00bf, 1);
-		ultracam_veio(uvd, 0x00, 0x0001, 0x00c0, 1);
-		ultracam_veio(uvd, 0x00, 0x0010, 0x00cb, 1);
-		ultracam_veio(uvd, 0x01, 0x00a4, 0x0001, 1);
-		ultracam_veio(uvd, 0x01, 0x0010, 0x0002, 1);
-		ultracam_veio(uvd, 0x01, 0x0066, 0x0007, 1);
-		ultracam_veio(uvd, 0x01, 0x000b, 0x0008, 1);
-		ultracam_veio(uvd, 0x01, 0x0034, 0x0009, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 1);
-		ultracam_veio(uvd, 0x01, 0x002e, 0x000b, 1);
-		ultracam_veio(uvd, 0x01, 0x00d6, 0x000c, 1);
-		ultracam_veio(uvd, 0x01, 0x00fc, 0x000d, 1);
-		ultracam_veio(uvd, 0x01, 0x00f1, 0x000e, 1);
-		ultracam_veio(uvd, 0x01, 0x00da, 0x000f, 1);
-		ultracam_veio(uvd, 0x01, 0x0036, 0x0010, 1);
-		ultracam_veio(uvd, 0x01, 0x000b, 0x0011, 1);
-		ultracam_veio(uvd, 0x01, 0x0001, 0x0012, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0013, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0014, 1);
-		ultracam_veio(uvd, 0x01, 0x0087, 0x0051, 1);
-		ultracam_veio(uvd, 0x01, 0x0040, 0x0052, 1);
-		ultracam_veio(uvd, 0x01, 0x0058, 0x0053, 1);
-		ultracam_veio(uvd, 0x01, 0x0040, 0x0054, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0040, 1);
-		ultracam_veio(uvd, 0x01, 0x0010, 0x0041, 1);
-		ultracam_veio(uvd, 0x01, 0x0020, 0x0042, 1);
-		ultracam_veio(uvd, 0x01, 0x0030, 0x0043, 1);
-		ultracam_veio(uvd, 0x01, 0x0040, 0x0044, 1);
-		ultracam_veio(uvd, 0x01, 0x0050, 0x0045, 1);
-		ultracam_veio(uvd, 0x01, 0x0060, 0x0046, 1);
-		ultracam_veio(uvd, 0x01, 0x0070, 0x0047, 1);
-		ultracam_veio(uvd, 0x01, 0x0080, 0x0048, 1);
-		ultracam_veio(uvd, 0x01, 0x0090, 0x0049, 1);
-		ultracam_veio(uvd, 0x01, 0x00a0, 0x004a, 1);
-		ultracam_veio(uvd, 0x01, 0x00b0, 0x004b, 1);
-		ultracam_veio(uvd, 0x01, 0x00c0, 0x004c, 1);
-		ultracam_veio(uvd, 0x01, 0x00d0, 0x004d, 1);
-		ultracam_veio(uvd, 0x01, 0x00e0, 0x004e, 1);
-		ultracam_veio(uvd, 0x01, 0x00f0, 0x004f, 1);
-		ultracam_veio(uvd, 0x01, 0x00ff, 0x0050, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0056, 1);
-		ultracam_veio(uvd, 0x00, 0x0080, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0080, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0004, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0002, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0020, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0040, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0017, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c3, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c4, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c5, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c6, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c7, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c8, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c9, 1);
-		ultracam_veio(uvd, 0x00, 0x00c0, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_veio(uvd, 0x02, 0xc040, 0x0001, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0008, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0009, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000b, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000c, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000d, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000e, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000f, 0);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0010, 0);
-		ultracam_veio(uvd, 0x01, 0x000b, 0x0008, 1);
-		ultracam_veio(uvd, 0x01, 0x0034, 0x0009, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x000a, 1);
-		ultracam_veio(uvd, 0x01, 0x002e, 0x000b, 1);
-		ultracam_veio(uvd, 0x01, 0x00d6, 0x000c, 1);
-		ultracam_veio(uvd, 0x01, 0x00fc, 0x000d, 1);
-		ultracam_veio(uvd, 0x01, 0x00f1, 0x000e, 1);
-		ultracam_veio(uvd, 0x01, 0x00da, 0x000f, 1);
-		ultracam_veio(uvd, 0x01, 0x0036, 0x0010, 1);
-		ultracam_veio(uvd, 0x01, 0x0000, 0x0001, 0);
-		ultracam_veio(uvd, 0x01, 0x0064, 0x0001, 1);
-		ultracam_veio(uvd, 0x01, 0x0059, 0x0051, 1);
-		ultracam_veio(uvd, 0x01, 0x003f, 0x0052, 1);
-		ultracam_veio(uvd, 0x01, 0x0094, 0x0053, 1);
-		ultracam_veio(uvd, 0x01, 0x00ff, 0x0011, 1);
-		ultracam_veio(uvd, 0x01, 0x0003, 0x0012, 1);
-		ultracam_veio(uvd, 0x01, 0x00f7, 0x0013, 1);
-		ultracam_veio(uvd, 0x00, 0x0009, 0x0011, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0001, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x0000, 1);
-		ultracam_veio(uvd, 0x00, 0x0020, 0x00c1, 1);
-		ultracam_veio(uvd, 0x00, 0x0010, 0x00c2, 1);
-		ultracam_veio(uvd, 0x00, 0x0000, 0x00ca, 1);
-		ultracam_alternateSetting(uvd, 0x04);
-		ultracam_veio(uvd, 0x02, 0x0000, 0x0001, 1);
-		ultracam_veio(uvd, 0x02, 0x0000, 0x0001, 1);
-		ultracam_veio(uvd, 0x02, 0x0000, 0x0006, 1);
-		ultracam_veio(uvd, 0x02, 0x9000, 0x0007, 1);
-		ultracam_veio(uvd, 0x02, 0x0042, 0x0001, 1);
-		ultracam_veio(uvd, 0x02, 0x0000, 0x000b, 0);
-		ultracam_resetPipe(uvd);
-		ULTRACAM_T(uvd)->initialized = (setup_ok != 0);
-	}
-	return setup_ok;
-}
-
-static void ultracam_configure_video(struct uvd *uvd)
-{
-	if (uvd == NULL)
-		return;
-
-	RESTRICT_TO_RANGE(init_brightness, 0, 255);
-	RESTRICT_TO_RANGE(init_contrast, 0, 255);
-	RESTRICT_TO_RANGE(init_color, 0, 255);
-	RESTRICT_TO_RANGE(init_hue, 0, 255);
-	RESTRICT_TO_RANGE(hue_correction, 0, 255);
-
-	memset(&uvd->vpic, 0, sizeof(uvd->vpic));
-	memset(&uvd->vpic_old, 0x55, sizeof(uvd->vpic_old));
-
-	uvd->vpic.colour = init_color << 8;
-	uvd->vpic.hue = init_hue << 8;
-	uvd->vpic.brightness = init_brightness << 8;
-	uvd->vpic.contrast = init_contrast << 8;
-	uvd->vpic.whiteness = 105 << 8; /* This one isn't used */
-	uvd->vpic.depth = 24;
-	uvd->vpic.palette = VIDEO_PALETTE_RGB24;
-
-	memset(&uvd->vcap, 0, sizeof(uvd->vcap));
-	strcpy(uvd->vcap.name, "IBM Ultra Camera");
-	uvd->vcap.type = VID_TYPE_CAPTURE;
-	uvd->vcap.channels = 1;
-	uvd->vcap.audios = 0;
-	uvd->vcap.maxwidth = VIDEOSIZE_X(uvd->canvas);
-	uvd->vcap.maxheight = VIDEOSIZE_Y(uvd->canvas);
-	uvd->vcap.minwidth = min_canvasWidth;
-	uvd->vcap.minheight = min_canvasHeight;
-
-	memset(&uvd->vchan, 0, sizeof(uvd->vchan));
-	uvd->vchan.flags = 0;
-	uvd->vchan.tuners = 0;
-	uvd->vchan.channel = 0;
-	uvd->vchan.type = VIDEO_TYPE_CAMERA;
-	strcpy(uvd->vchan.name, "Camera");
-}
-
-/*
- * ultracam_probe()
- *
- * This procedure queries device descriptor and accepts the interface
- * if it looks like our camera.
- *
- * History:
- * 12-Nov-2000 Reworked to comply with new probe() signature.
- * 23-Jan-2001 Added compatibility with 2.2.x kernels.
- */
-static int ultracam_probe(struct usb_interface *intf, const struct usb_device_id *devid)
-{
-	struct usb_device *dev = interface_to_usbdev(intf);
-	struct uvd *uvd = NULL;
-	int ix, i, nas;
-	int actInterface=-1, inactInterface=-1, maxPS=0;
-	unsigned char video_ep = 0;
-
-	if (debug >= 1)
-		dev_info(&intf->dev, "ultracam_probe\n");
-
-	/* We don't handle multi-config cameras */
-	if (dev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	dev_info(&intf->dev, "IBM Ultra camera found (rev. 0x%04x)\n",
-		 le16_to_cpu(dev->descriptor.bcdDevice));
-
-	/* Validate found interface: must have one ISO endpoint */
-	nas = intf->num_altsetting;
-	if (debug > 0)
-		dev_info(&intf->dev, "Number of alternate settings=%d.\n",
-			 nas);
-	if (nas < 8) {
-		err("Too few alternate settings for this camera!");
-		return -ENODEV;
-	}
-	/* Validate all alternate settings */
-	for (ix=0; ix < nas; ix++) {
-		const struct usb_host_interface *interface;
-		const struct usb_endpoint_descriptor *endpoint;
-
-		interface = &intf->altsetting[ix];
-		i = interface->desc.bAlternateSetting;
-		if (interface->desc.bNumEndpoints != 1) {
-			err("Interface %d. has %u. endpoints!",
-			    interface->desc.bInterfaceNumber,
-			    (unsigned)(interface->desc.bNumEndpoints));
-			return -ENODEV;
-		}
-		endpoint = &interface->endpoint[0].desc;
-		if (video_ep == 0)
-			video_ep = endpoint->bEndpointAddress;
-		else if (video_ep != endpoint->bEndpointAddress) {
-			err("Alternate settings have different endpoint addresses!");
-			return -ENODEV;
-		}
-		if (!usb_endpoint_xfer_isoc(endpoint)) {
-			err("Interface %d. has non-ISO endpoint!",
-			    interface->desc.bInterfaceNumber);
-			return -ENODEV;
-		}
-		if (usb_endpoint_dir_out(endpoint)) {
-			err("Interface %d. has ISO OUT endpoint!",
-			    interface->desc.bInterfaceNumber);
-			return -ENODEV;
-		}
-		if (le16_to_cpu(endpoint->wMaxPacketSize) == 0) {
-			if (inactInterface < 0)
-				inactInterface = i;
-			else {
-				err("More than one inactive alt. setting!");
-				return -ENODEV;
-			}
-		} else {
-			if (actInterface < 0) {
-				actInterface = i;
-				maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
-				if (debug > 0)
-					dev_info(&intf->dev,
-						 "Active setting=%d. "
-						 "maxPS=%d.\n", i, maxPS);
-			} else {
-				/* Got another active alt. setting */
-				if (maxPS < le16_to_cpu(endpoint->wMaxPacketSize)) {
-					/* This one is better! */
-					actInterface = i;
-					maxPS = le16_to_cpu(endpoint->wMaxPacketSize);
-					if (debug > 0) {
-						dev_info(&intf->dev,
-							 "Even better ctive "
-							 "setting=%d. "
-							 "maxPS=%d.\n",
-							 i, maxPS);
-					}
-				}
-			}
-		}
-	}
-	if ((maxPS <= 0) || (actInterface < 0) || (inactInterface < 0)) {
-		err("Failed to recognize the camera!");
-		return -ENODEV;
-	}
-
-	uvd = usbvideo_AllocateDevice(cams);
-	if (uvd != NULL) {
-		/* Here uvd is a fully allocated uvd object */
-		uvd->flags = flags;
-		uvd->debug = debug;
-		uvd->dev = dev;
-		uvd->iface = intf->altsetting->desc.bInterfaceNumber;
-		uvd->ifaceAltInactive = inactInterface;
-		uvd->ifaceAltActive = actInterface;
-		uvd->video_endp = video_ep;
-		uvd->iso_packet_len = maxPS;
-		uvd->paletteBits = 1L << VIDEO_PALETTE_RGB24;
-		uvd->defaultPalette = VIDEO_PALETTE_RGB24;
-		uvd->canvas = VIDEOSIZE(640, 480);	/* FIXME */
-		uvd->videosize = uvd->canvas; /* ultracam_size_to_videosize(size);*/
-
-		/* Initialize ibmcam-specific data */
-		assert(ULTRACAM_T(uvd) != NULL);
-		ULTRACAM_T(uvd)->camera_model = 0; /* Not used yet */
-		ULTRACAM_T(uvd)->initialized = 0;
-
-		ultracam_configure_video(uvd);
-
-		i = usbvideo_RegisterVideoDevice(uvd);
-		if (i != 0) {
-			err("usbvideo_RegisterVideoDevice() failed.");
-			uvd = NULL;
-		}
-	}
-
-	if (uvd) {
-		usb_set_intfdata (intf, uvd);
-		return 0;
-	}
-	return -EIO;
-}
-
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(ULTRACAM_VENDOR_ID, ULTRACAM_PRODUCT_ID) },
-	{ }  /* Terminating entry */
-};
-
-/*
- * ultracam_init()
- *
- * This code is run to initialize the driver.
- */
-static int __init ultracam_init(void)
-{
-	struct usbvideo_cb cbTbl;
-	memset(&cbTbl, 0, sizeof(cbTbl));
-	cbTbl.probe = ultracam_probe;
-	cbTbl.setupOnOpen = ultracam_setup_on_open;
-	cbTbl.videoStart = ultracam_video_start;
-	cbTbl.videoStop = ultracam_video_stop;
-	cbTbl.processData = ultracam_ProcessIsocData;
-	cbTbl.postProcess = usbvideo_DeinterlaceFrame;
-	cbTbl.adjustPicture = ultracam_adjust_picture;
-	cbTbl.getFPS = ultracam_calculate_fps;
-	return usbvideo_register(
-		&cams,
-		MAX_CAMERAS,
-		sizeof(ultracam_t),
-		"ultracam",
-		&cbTbl,
-		THIS_MODULE,
-		id_table);
-}
-
-static void __exit ultracam_cleanup(void)
-{
-	usbvideo_Deregister(&cams);
-}
-
-MODULE_DEVICE_TABLE(usb, id_table);
-MODULE_LICENSE("GPL");
-
-module_init(ultracam_init);
-module_exit(ultracam_cleanup);
diff --git a/drivers/media/video/usbvision/usbvision-cards.c b/drivers/media/video/usbvision/usbvision-cards.c
index 503b13beb92..68b998bd203 100644
--- a/drivers/media/video/usbvision/usbvision-cards.c
+++ b/drivers/media/video/usbvision/usbvision-cards.c
@@ -32,1072 +32,1072 @@
 /* Supported Devices: A table for usbvision.c*/
 struct usbvision_device_data_st  usbvision_device_data[] = {
 	[XANBOO] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 4,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Xanboo",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 4,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Xanboo",
 	},
 	[BELKIN_VIDEOBUS_II] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Belkin USB VideoBus II Adapter",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Belkin USB VideoBus II Adapter",
 	},
 	[BELKIN_VIDEOBUS] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Belkin Components USB VideoBus",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Belkin Components USB VideoBus",
 	},
 	[BELKIN_USB_VIDEOBUS_II] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Belkin USB VideoBus II",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Belkin USB VideoBus II",
 	},
 	[ECHOFX_INTERVIEW_LITE] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "echoFX InterView Lite",
+		.interface      = 0,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "echoFX InterView Lite",
 	},
 	[USBGEAR_USBG_V1] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "USBGear USBG-V1 resp. HAMA USB",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "USBGear USBG-V1 resp. HAMA USB",
 	},
 	[D_LINK_V100] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 4,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "D-Link V100",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 4,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "D-Link V100",
 	},
 	[X10_USB_CAMERA] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "X10 USB Camera",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "X10 USB Camera",
 	},
 	[HPG_WINTV_LIVE_PAL_BG] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = -1,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Live (PAL B/G)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = -1,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Live (PAL B/G)",
 	},
 	[HPG_WINTV_LIVE_PRO_NTSC_MN] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Live Pro (NTSC M/N)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Live Pro (NTSC M/N)",
 	},
 	[ZORAN_PMD_NOGATECH] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 2,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Zoran Co. PMD (Nogatech) AV-grabber Manhattan",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 2,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Zoran Co. PMD (Nogatech) AV-grabber Manhattan",
 	},
 	[NOGATECH_USB_TV_NTSC_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = 20,
-		.ModelString   = "Nogatech USB-TV (NTSC) FM",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = 20,
+		.model_string   = "Nogatech USB-TV (NTSC) FM",
 	},
 	[PNY_USB_TV_NTSC_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = 20,
-		.ModelString   = "PNY USB-TV (NTSC) FM",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = 20,
+		.model_string   = "PNY USB-TV (NTSC) FM",
 	},
 	[PV_PLAYTV_USB_PRO_PAL_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "PixelView PlayTv-USB PRO (PAL) FM",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "PixelView PlayTv-USB PRO (PAL) FM",
 	},
 	[ZT_721] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "ZTV ZT-721 2.4GHz USB A/V Receiver",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "ZTV ZT-721 2.4GHz USB A/V Receiver",
 	},
 	[HPG_WINTV_NTSC_MN] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = 20,
-		.ModelString   = "Hauppauge WinTV USB (NTSC M/N)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = 20,
+		.model_string   = "Hauppauge WinTV USB (NTSC M/N)",
 	},
 	[HPG_WINTV_PAL_BG] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL B/G)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL B/G)",
 	},
 	[HPG_WINTV_PAL_I] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL I)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL I)",
 	},
 	[HPG_WINTV_PAL_SECAM_L] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_SECAM,
-		.X_Offset      = 0x80,
-		.Y_Offset      = 0x16,
-		.ModelString   = "Hauppauge WinTV USB (PAL/SECAM L)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_SECAM,
+		.x_offset       = 0x80,
+		.y_offset       = 0x16,
+		.model_string   = "Hauppauge WinTV USB (PAL/SECAM L)",
 	},
 	[HPG_WINTV_PAL_D_K] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL D/K)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL D/K)",
 	},
 	[HPG_WINTV_NTSC_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (NTSC FM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (NTSC FM)",
 	},
 	[HPG_WINTV_PAL_BG_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL B/G FM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL B/G FM)",
 	},
 	[HPG_WINTV_PAL_I_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL I FM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL I FM)",
 	},
 	[HPG_WINTV_PAL_D_K_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTV USB (PAL D/K FM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTV USB (PAL D/K FM)",
 	},
 	[HPG_WINTV_PRO_NTSC_MN] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_MICROTUNE_4049FM5,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (NTSC M/N)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_MICROTUNE_4049FM5,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (NTSC M/N)",
 	},
 	[HPG_WINTV_PRO_NTSC_MN_V2] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_MICROTUNE_4049FM5,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (NTSC M/N) V2",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_MICROTUNE_4049FM5,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (NTSC M/N) V2",
 	},
 	[HPG_WINTV_PRO_PAL] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_FM1216ME_MK3,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L)",
 	},
 	[HPG_WINTV_PRO_NTSC_MN_V3] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (NTSC M/N) V3",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (NTSC M/N) V3",
 	},
 	[HPG_WINTV_PRO_PAL_BG] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL B/G)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL B/G)",
 	},
 	[HPG_WINTV_PRO_PAL_I] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL I)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL I)",
 	},
 	[HPG_WINTV_PRO_PAL_SECAM_L] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_SECAM,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL/SECAM L)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_SECAM,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL/SECAM L)",
 	},
 	[HPG_WINTV_PRO_PAL_D_K] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL D/K)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL D/K)",
 	},
 	[HPG_WINTV_PRO_PAL_SECAM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_SECAM,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_SECAM,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L)",
 	},
 	[HPG_WINTV_PRO_PAL_SECAM_V2] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_SECAM,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_SECAM,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL/SECAM BGDK/I/L) V2",
 	},
 	[HPG_WINTV_PRO_PAL_BG_V2] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_ALPS_TSBE1_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL B/G) V2",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_ALPS_TSBE1_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL B/G) V2",
 	},
 	[HPG_WINTV_PRO_PAL_BG_D_K] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_ALPS_TSBE1_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL B/G,D/K)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_ALPS_TSBE1_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL B/G,D/K)",
 	},
 	[HPG_WINTV_PRO_PAL_I_D_K] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_LG_PAL_NEW_TAPC,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL I,D/K)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_LG_PAL_NEW_TAPC,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL I,D/K)",
 	},
 	[HPG_WINTV_PRO_NTSC_MN_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (NTSC M/N FM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (NTSC M/N FM)",
 	},
 	[HPG_WINTV_PRO_PAL_BG_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL B/G FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL B/G FM)",
 	},
 	[HPG_WINTV_PRO_PAL_I_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL I FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL I FM)",
 	},
 	[HPG_WINTV_PRO_PAL_D_K_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL D/K FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL D/K FM)",
 	},
 	[HPG_WINTV_PRO_TEMIC_PAL_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_MICROTUNE_4049FM5,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_MICROTUNE_4049FM5,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (Temic PAL/SECAM B/G/I/D/K/L FM)",
 	},
 	[HPG_WINTV_PRO_TEMIC_PAL_BG_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_MICROTUNE_4049FM5,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (Temic PAL B/G FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_MICROTUNE_4049FM5,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (Temic PAL B/G FM)",
 	},
 	[HPG_WINTV_PRO_PAL_FM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_FM1216ME_MK3,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (PAL/SECAM B/G/I/D/K/L FM)",
 	},
 	[HPG_WINTV_PRO_NTSC_MN_FM_V2] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Hauppauge WinTV USB Pro (NTSC M/N FM) V2",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Hauppauge WinTV USB Pro (NTSC M/N FM) V2",
 	},
 	[CAMTEL_TVB330] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = 5,
-		.Y_Offset      = 5,
-		.ModelString   = "Camtel Technology USB TV Genie Pro FM Model TVB330",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = 5,
+		.y_offset       = 5,
+		.model_string   = "Camtel Technology USB TV Genie Pro FM Model TVB330",
 	},
 	[DIGITAL_VIDEO_CREATOR_I] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Digital Video Creator I",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Digital Video Creator I",
 	},
 	[GLOBAL_VILLAGE_GV_007_NTSC] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 82,
-		.Y_Offset      = 20,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Global Village GV-007 (NTSC)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 82,
+		.y_offset       = 20,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Global Village GV-007 (NTSC)",
 	},
 	[DAZZLE_DVC_50_REV_1_NTSC] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Dazzle Fusion Model DVC-50 Rev 1 (NTSC)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Dazzle Fusion Model DVC-50 Rev 1 (NTSC)",
 	},
 	[DAZZLE_DVC_80_REV_1_PAL] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Dazzle Fusion Model DVC-80 Rev 1 (PAL)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Dazzle Fusion Model DVC-80 Rev 1 (PAL)",
 	},
 	[DAZZLE_DVC_90_REV_1_SECAM] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 0,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 0,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Dazzle Fusion Model DVC-90 Rev 1 (SECAM)",
 	},
 	[ESKAPE_LABS_MYTV2GO] = {
-		.Interface     = 0,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_FM1216ME_MK3,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Eskape Labs MyTV2Go",
+		.interface      = 0,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Eskape Labs MyTV2Go",
 	},
 	[PINNA_PCTV_USB_PAL] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 0,
-		.Tuner         = 1,
-		.TunerType     = TUNER_TEMIC_4066FY5_PAL_I,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Pinnacle Studio PCTV USB (PAL)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 0,
+		.tuner          = 1,
+		.tuner_type     = TUNER_TEMIC_4066FY5_PAL_I,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Pinnacle Studio PCTV USB (PAL)",
 	},
 	[PINNA_PCTV_USB_SECAM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_SECAM,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_SECAM,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Pinnacle Studio PCTV USB (SECAM)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_SECAM,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_SECAM,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Pinnacle Studio PCTV USB (SECAM)",
 	},
 	[PINNA_PCTV_USB_PAL_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = 128,
-		.Y_Offset      = 23,
-		.ModelString   = "Pinnacle Studio PCTV USB (PAL) FM",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = 128,
+		.y_offset       = 23,
+		.model_string   = "Pinnacle Studio PCTV USB (PAL) FM",
 	},
 	[MIRO_PCTV_USB] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_PAL,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Miro PCTV USB",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Miro PCTV USB",
 	},
 	[PINNA_PCTV_USB_NTSC_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Pinnacle Studio PCTV USB (NTSC) FM",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Pinnacle Studio PCTV USB (NTSC) FM",
 	},
 	[PINNA_PCTV_USB_NTSC_FM_V3] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Pinnacle Studio PCTV USB (NTSC) FM V3",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Pinnacle Studio PCTV USB (NTSC) FM V3",
 	},
 	[PINNA_PCTV_USB_PAL_FM_V2] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_TEMIC_4009FR5_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle Studio PCTV USB (PAL) FM V2",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_TEMIC_4009FR5_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle Studio PCTV USB (PAL) FM V2",
 	},
 	[PINNA_PCTV_USB_NTSC_FM_V2] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_TEMIC_4039FR5_NTSC,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle Studio PCTV USB (NTSC) FM V2",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_TEMIC_4039FR5_NTSC,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle Studio PCTV USB (NTSC) FM V2",
 	},
 	[PINNA_PCTV_USB_PAL_FM_V3] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_TEMIC_4009FR5_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle Studio PCTV USB (PAL) FM V3",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_TEMIC_4009FR5_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle Studio PCTV USB (PAL) FM V3",
 	},
 	[PINNA_LINX_VD_IN_CAB_NTSC] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle Studio Linx Video input cable (NTSC)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle Studio Linx Video input cable (NTSC)",
 	},
 	[PINNA_LINX_VD_IN_CAB_PAL] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 2,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 0,
-		.TunerType     = 0,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle Studio Linx Video input cable (PAL)",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 2,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 0,
+		.tuner_type     = 0,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle Studio Linx Video input cable (PAL)",
 	},
 	[PINNA_PCTV_BUNGEE_PAL_FM] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7113,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_PAL,
-		.AudioChannels = 1,
-		.Radio         = 1,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_TEMIC_4009FR5_PAL,
-		.X_Offset      = 0,
-		.Y_Offset      = 3,
-		.Dvi_yuv_override = 1,
-		.Dvi_yuv       = 7,
-		.ModelString   = "Pinnacle PCTV Bungee USB (PAL) FM",
+		.interface      = -1,
+		.codec          = CODEC_SAA7113,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_PAL,
+		.audio_channels = 1,
+		.radio          = 1,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_TEMIC_4009FR5_PAL,
+		.x_offset       = 0,
+		.y_offset       = 3,
+		.dvi_yuv_override = 1,
+		.dvi_yuv        = 7,
+		.model_string   = "Pinnacle PCTV Bungee USB (PAL) FM",
 	},
 	[HPG_WINTV] = {
-		.Interface     = -1,
-		.Codec         = CODEC_SAA7111,
-		.VideoChannels = 3,
-		.VideoNorm     = V4L2_STD_NTSC,
-		.AudioChannels = 1,
-		.Radio         = 0,
-		.vbi           = 1,
-		.Tuner         = 1,
-		.TunerType     = TUNER_PHILIPS_NTSC_M,
-		.X_Offset      = -1,
-		.Y_Offset      = -1,
-		.ModelString   = "Hauppauge WinTv-USB",
+		.interface      = -1,
+		.codec          = CODEC_SAA7111,
+		.video_channels = 3,
+		.video_norm     = V4L2_STD_NTSC,
+		.audio_channels = 1,
+		.radio          = 0,
+		.vbi            = 1,
+		.tuner          = 1,
+		.tuner_type     = TUNER_PHILIPS_NTSC_M,
+		.x_offset       = -1,
+		.y_offset       = -1,
+		.model_string   = "Hauppauge WinTv-USB",
 	},
 };
-const int usbvision_device_data_size=ARRAY_SIZE(usbvision_device_data);
+const int usbvision_device_data_size = ARRAY_SIZE(usbvision_device_data);
 
 /* Supported Devices */
 
-struct usb_device_id usbvision_table [] = {
-	{ USB_DEVICE(0x0a6f, 0x0400), .driver_info=XANBOO },
-	{ USB_DEVICE(0x050d, 0x0106), .driver_info=BELKIN_VIDEOBUS_II },
-	{ USB_DEVICE(0x050d, 0x0207), .driver_info=BELKIN_VIDEOBUS },
-	{ USB_DEVICE(0x050d, 0x0208), .driver_info=BELKIN_USB_VIDEOBUS_II },
-	{ USB_DEVICE(0x0571, 0x0002), .driver_info=ECHOFX_INTERVIEW_LITE },
-	{ USB_DEVICE(0x0573, 0x0003), .driver_info=USBGEAR_USBG_V1 },
-	{ USB_DEVICE(0x0573, 0x0400), .driver_info=D_LINK_V100 },
-	{ USB_DEVICE(0x0573, 0x2000), .driver_info=X10_USB_CAMERA },
-	{ USB_DEVICE(0x0573, 0x2d00), .driver_info=HPG_WINTV_LIVE_PAL_BG },
-	{ USB_DEVICE(0x0573, 0x2d01), .driver_info=HPG_WINTV_LIVE_PRO_NTSC_MN },
-	{ USB_DEVICE(0x0573, 0x2101), .driver_info=ZORAN_PMD_NOGATECH },
-	{ USB_DEVICE(0x0573, 0x4100), .driver_info=NOGATECH_USB_TV_NTSC_FM },
-	{ USB_DEVICE(0x0573, 0x4110), .driver_info=PNY_USB_TV_NTSC_FM },
-	{ USB_DEVICE(0x0573, 0x4450), .driver_info=PV_PLAYTV_USB_PRO_PAL_FM },
-	{ USB_DEVICE(0x0573, 0x4550), .driver_info=ZT_721 },
-	{ USB_DEVICE(0x0573, 0x4d00), .driver_info=HPG_WINTV_NTSC_MN },
-	{ USB_DEVICE(0x0573, 0x4d01), .driver_info=HPG_WINTV_PAL_BG },
-	{ USB_DEVICE(0x0573, 0x4d02), .driver_info=HPG_WINTV_PAL_I },
-	{ USB_DEVICE(0x0573, 0x4d03), .driver_info=HPG_WINTV_PAL_SECAM_L },
-	{ USB_DEVICE(0x0573, 0x4d04), .driver_info=HPG_WINTV_PAL_D_K },
-	{ USB_DEVICE(0x0573, 0x4d10), .driver_info=HPG_WINTV_NTSC_FM },
-	{ USB_DEVICE(0x0573, 0x4d11), .driver_info=HPG_WINTV_PAL_BG_FM },
-	{ USB_DEVICE(0x0573, 0x4d12), .driver_info=HPG_WINTV_PAL_I_FM },
-	{ USB_DEVICE(0x0573, 0x4d14), .driver_info=HPG_WINTV_PAL_D_K_FM },
-	{ USB_DEVICE(0x0573, 0x4d2a), .driver_info=HPG_WINTV_PRO_NTSC_MN },
-	{ USB_DEVICE(0x0573, 0x4d2b), .driver_info=HPG_WINTV_PRO_NTSC_MN_V2 },
-	{ USB_DEVICE(0x0573, 0x4d2c), .driver_info=HPG_WINTV_PRO_PAL },
+struct usb_device_id usbvision_table[] = {
+	{ USB_DEVICE(0x0a6f, 0x0400), .driver_info = XANBOO },
+	{ USB_DEVICE(0x050d, 0x0106), .driver_info = BELKIN_VIDEOBUS_II },
+	{ USB_DEVICE(0x050d, 0x0207), .driver_info = BELKIN_VIDEOBUS },
+	{ USB_DEVICE(0x050d, 0x0208), .driver_info = BELKIN_USB_VIDEOBUS_II },
+	{ USB_DEVICE(0x0571, 0x0002), .driver_info = ECHOFX_INTERVIEW_LITE },
+	{ USB_DEVICE(0x0573, 0x0003), .driver_info = USBGEAR_USBG_V1 },
+	{ USB_DEVICE(0x0573, 0x0400), .driver_info = D_LINK_V100 },
+	{ USB_DEVICE(0x0573, 0x2000), .driver_info = X10_USB_CAMERA },
+	{ USB_DEVICE(0x0573, 0x2d00), .driver_info = HPG_WINTV_LIVE_PAL_BG },
+	{ USB_DEVICE(0x0573, 0x2d01), .driver_info = HPG_WINTV_LIVE_PRO_NTSC_MN },
+	{ USB_DEVICE(0x0573, 0x2101), .driver_info = ZORAN_PMD_NOGATECH },
+	{ USB_DEVICE(0x0573, 0x4100), .driver_info = NOGATECH_USB_TV_NTSC_FM },
+	{ USB_DEVICE(0x0573, 0x4110), .driver_info = PNY_USB_TV_NTSC_FM },
+	{ USB_DEVICE(0x0573, 0x4450), .driver_info = PV_PLAYTV_USB_PRO_PAL_FM },
+	{ USB_DEVICE(0x0573, 0x4550), .driver_info = ZT_721 },
+	{ USB_DEVICE(0x0573, 0x4d00), .driver_info = HPG_WINTV_NTSC_MN },
+	{ USB_DEVICE(0x0573, 0x4d01), .driver_info = HPG_WINTV_PAL_BG },
+	{ USB_DEVICE(0x0573, 0x4d02), .driver_info = HPG_WINTV_PAL_I },
+	{ USB_DEVICE(0x0573, 0x4d03), .driver_info = HPG_WINTV_PAL_SECAM_L },
+	{ USB_DEVICE(0x0573, 0x4d04), .driver_info = HPG_WINTV_PAL_D_K },
+	{ USB_DEVICE(0x0573, 0x4d10), .driver_info = HPG_WINTV_NTSC_FM },
+	{ USB_DEVICE(0x0573, 0x4d11), .driver_info = HPG_WINTV_PAL_BG_FM },
+	{ USB_DEVICE(0x0573, 0x4d12), .driver_info = HPG_WINTV_PAL_I_FM },
+	{ USB_DEVICE(0x0573, 0x4d14), .driver_info = HPG_WINTV_PAL_D_K_FM },
+	{ USB_DEVICE(0x0573, 0x4d2a), .driver_info = HPG_WINTV_PRO_NTSC_MN },
+	{ USB_DEVICE(0x0573, 0x4d2b), .driver_info = HPG_WINTV_PRO_NTSC_MN_V2 },
+	{ USB_DEVICE(0x0573, 0x4d2c), .driver_info = HPG_WINTV_PRO_PAL },
 	{ USB_DEVICE(0x0573, 0x4d20), .driver_info = HPG_WINTV_PRO_NTSC_MN_V3 },
-	{ USB_DEVICE(0x0573, 0x4d21), .driver_info=HPG_WINTV_PRO_PAL_BG },
-	{ USB_DEVICE(0x0573, 0x4d22), .driver_info=HPG_WINTV_PRO_PAL_I },
-	{ USB_DEVICE(0x0573, 0x4d23), .driver_info=HPG_WINTV_PRO_PAL_SECAM_L },
-	{ USB_DEVICE(0x0573, 0x4d24), .driver_info=HPG_WINTV_PRO_PAL_D_K },
-	{ USB_DEVICE(0x0573, 0x4d25), .driver_info=HPG_WINTV_PRO_PAL_SECAM },
-	{ USB_DEVICE(0x0573, 0x4d26), .driver_info=HPG_WINTV_PRO_PAL_SECAM_V2 },
-	{ USB_DEVICE(0x0573, 0x4d27), .driver_info=HPG_WINTV_PRO_PAL_BG_V2 },
-	{ USB_DEVICE(0x0573, 0x4d28), .driver_info=HPG_WINTV_PRO_PAL_BG_D_K },
-	{ USB_DEVICE(0x0573, 0x4d29), .driver_info=HPG_WINTV_PRO_PAL_I_D_K },
-	{ USB_DEVICE(0x0573, 0x4d30), .driver_info=HPG_WINTV_PRO_NTSC_MN_FM },
-	{ USB_DEVICE(0x0573, 0x4d31), .driver_info=HPG_WINTV_PRO_PAL_BG_FM },
-	{ USB_DEVICE(0x0573, 0x4d32), .driver_info=HPG_WINTV_PRO_PAL_I_FM },
-	{ USB_DEVICE(0x0573, 0x4d34), .driver_info=HPG_WINTV_PRO_PAL_D_K_FM },
-	{ USB_DEVICE(0x0573, 0x4d35), .driver_info=HPG_WINTV_PRO_TEMIC_PAL_FM },
-	{ USB_DEVICE(0x0573, 0x4d36), .driver_info=HPG_WINTV_PRO_TEMIC_PAL_BG_FM },
-	{ USB_DEVICE(0x0573, 0x4d37), .driver_info=HPG_WINTV_PRO_PAL_FM },
-	{ USB_DEVICE(0x0573, 0x4d38), .driver_info=HPG_WINTV_PRO_NTSC_MN_FM_V2 },
-	{ USB_DEVICE(0x0768, 0x0006), .driver_info=CAMTEL_TVB330 },
-	{ USB_DEVICE(0x07d0, 0x0001), .driver_info=DIGITAL_VIDEO_CREATOR_I },
-	{ USB_DEVICE(0x07d0, 0x0002), .driver_info=GLOBAL_VILLAGE_GV_007_NTSC },
-	{ USB_DEVICE(0x07d0, 0x0003), .driver_info=DAZZLE_DVC_50_REV_1_NTSC },
-	{ USB_DEVICE(0x07d0, 0x0004), .driver_info=DAZZLE_DVC_80_REV_1_PAL },
-	{ USB_DEVICE(0x07d0, 0x0005), .driver_info=DAZZLE_DVC_90_REV_1_SECAM },
-	{ USB_DEVICE(0x07f8, 0x9104), .driver_info=ESKAPE_LABS_MYTV2GO },
-	{ USB_DEVICE(0x2304, 0x010d), .driver_info=PINNA_PCTV_USB_PAL },
-	{ USB_DEVICE(0x2304, 0x0109), .driver_info=PINNA_PCTV_USB_SECAM },
-	{ USB_DEVICE(0x2304, 0x0110), .driver_info=PINNA_PCTV_USB_PAL_FM },
-	{ USB_DEVICE(0x2304, 0x0111), .driver_info=MIRO_PCTV_USB },
-	{ USB_DEVICE(0x2304, 0x0112), .driver_info=PINNA_PCTV_USB_NTSC_FM },
+	{ USB_DEVICE(0x0573, 0x4d21), .driver_info = HPG_WINTV_PRO_PAL_BG },
+	{ USB_DEVICE(0x0573, 0x4d22), .driver_info = HPG_WINTV_PRO_PAL_I },
+	{ USB_DEVICE(0x0573, 0x4d23), .driver_info = HPG_WINTV_PRO_PAL_SECAM_L },
+	{ USB_DEVICE(0x0573, 0x4d24), .driver_info = HPG_WINTV_PRO_PAL_D_K },
+	{ USB_DEVICE(0x0573, 0x4d25), .driver_info = HPG_WINTV_PRO_PAL_SECAM },
+	{ USB_DEVICE(0x0573, 0x4d26), .driver_info = HPG_WINTV_PRO_PAL_SECAM_V2 },
+	{ USB_DEVICE(0x0573, 0x4d27), .driver_info = HPG_WINTV_PRO_PAL_BG_V2 },
+	{ USB_DEVICE(0x0573, 0x4d28), .driver_info = HPG_WINTV_PRO_PAL_BG_D_K },
+	{ USB_DEVICE(0x0573, 0x4d29), .driver_info = HPG_WINTV_PRO_PAL_I_D_K },
+	{ USB_DEVICE(0x0573, 0x4d30), .driver_info = HPG_WINTV_PRO_NTSC_MN_FM },
+	{ USB_DEVICE(0x0573, 0x4d31), .driver_info = HPG_WINTV_PRO_PAL_BG_FM },
+	{ USB_DEVICE(0x0573, 0x4d32), .driver_info = HPG_WINTV_PRO_PAL_I_FM },
+	{ USB_DEVICE(0x0573, 0x4d34), .driver_info = HPG_WINTV_PRO_PAL_D_K_FM },
+	{ USB_DEVICE(0x0573, 0x4d35), .driver_info = HPG_WINTV_PRO_TEMIC_PAL_FM },
+	{ USB_DEVICE(0x0573, 0x4d36), .driver_info = HPG_WINTV_PRO_TEMIC_PAL_BG_FM },
+	{ USB_DEVICE(0x0573, 0x4d37), .driver_info = HPG_WINTV_PRO_PAL_FM },
+	{ USB_DEVICE(0x0573, 0x4d38), .driver_info = HPG_WINTV_PRO_NTSC_MN_FM_V2 },
+	{ USB_DEVICE(0x0768, 0x0006), .driver_info = CAMTEL_TVB330 },
+	{ USB_DEVICE(0x07d0, 0x0001), .driver_info = DIGITAL_VIDEO_CREATOR_I },
+	{ USB_DEVICE(0x07d0, 0x0002), .driver_info = GLOBAL_VILLAGE_GV_007_NTSC },
+	{ USB_DEVICE(0x07d0, 0x0003), .driver_info = DAZZLE_DVC_50_REV_1_NTSC },
+	{ USB_DEVICE(0x07d0, 0x0004), .driver_info = DAZZLE_DVC_80_REV_1_PAL },
+	{ USB_DEVICE(0x07d0, 0x0005), .driver_info = DAZZLE_DVC_90_REV_1_SECAM },
+	{ USB_DEVICE(0x07f8, 0x9104), .driver_info = ESKAPE_LABS_MYTV2GO },
+	{ USB_DEVICE(0x2304, 0x010d), .driver_info = PINNA_PCTV_USB_PAL },
+	{ USB_DEVICE(0x2304, 0x0109), .driver_info = PINNA_PCTV_USB_SECAM },
+	{ USB_DEVICE(0x2304, 0x0110), .driver_info = PINNA_PCTV_USB_PAL_FM },
+	{ USB_DEVICE(0x2304, 0x0111), .driver_info = MIRO_PCTV_USB },
+	{ USB_DEVICE(0x2304, 0x0112), .driver_info = PINNA_PCTV_USB_NTSC_FM },
 	{ USB_DEVICE(0x2304, 0x0113),
 	  .driver_info = PINNA_PCTV_USB_NTSC_FM_V3 },
-	{ USB_DEVICE(0x2304, 0x0210), .driver_info=PINNA_PCTV_USB_PAL_FM_V2 },
-	{ USB_DEVICE(0x2304, 0x0212), .driver_info=PINNA_PCTV_USB_NTSC_FM_V2 },
-	{ USB_DEVICE(0x2304, 0x0214), .driver_info=PINNA_PCTV_USB_PAL_FM_V3 },
-	{ USB_DEVICE(0x2304, 0x0300), .driver_info=PINNA_LINX_VD_IN_CAB_NTSC },
-	{ USB_DEVICE(0x2304, 0x0301), .driver_info=PINNA_LINX_VD_IN_CAB_PAL },
-	{ USB_DEVICE(0x2304, 0x0419), .driver_info=PINNA_PCTV_BUNGEE_PAL_FM },
-	{ USB_DEVICE(0x2400, 0x4200), .driver_info=HPG_WINTV },
+	{ USB_DEVICE(0x2304, 0x0210), .driver_info = PINNA_PCTV_USB_PAL_FM_V2 },
+	{ USB_DEVICE(0x2304, 0x0212), .driver_info = PINNA_PCTV_USB_NTSC_FM_V2 },
+	{ USB_DEVICE(0x2304, 0x0214), .driver_info = PINNA_PCTV_USB_PAL_FM_V3 },
+	{ USB_DEVICE(0x2304, 0x0300), .driver_info = PINNA_LINX_VD_IN_CAB_NTSC },
+	{ USB_DEVICE(0x2304, 0x0301), .driver_info = PINNA_LINX_VD_IN_CAB_PAL },
+	{ USB_DEVICE(0x2304, 0x0419), .driver_info = PINNA_PCTV_BUNGEE_PAL_FM },
+	{ USB_DEVICE(0x2400, 0x4200), .driver_info = HPG_WINTV },
 	{ },    /* terminate list */
 };
 
-MODULE_DEVICE_TABLE (usb, usbvision_table);
+MODULE_DEVICE_TABLE(usb, usbvision_table);
diff --git a/drivers/media/video/usbvision/usbvision-core.c b/drivers/media/video/usbvision/usbvision-core.c
index b9dd74fde21..c8feb0d6fcc 100644
--- a/drivers/media/video/usbvision/usbvision-core.c
+++ b/drivers/media/video/usbvision/usbvision-core.c
@@ -33,7 +33,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 
@@ -46,30 +46,30 @@
 #include "usbvision.h"
 
 static unsigned int core_debug;
-module_param(core_debug,int,0644);
-MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
+module_param(core_debug, int, 0644);
+MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
 
 static unsigned int force_testpattern;
-module_param(force_testpattern,int,0644);
-MODULE_PARM_DESC(force_testpattern,"enable test pattern display [core]");
+module_param(force_testpattern, int, 0644);
+MODULE_PARM_DESC(force_testpattern, "enable test pattern display [core]");
 
-static int adjustCompression = 1;	/* Set the compression to be adaptive */
-module_param(adjustCompression, int, 0444);
-MODULE_PARM_DESC(adjustCompression, " Set the ADPCM compression for the device.  Default: 1 (On)");
+static int adjust_compression = 1;	/* Set the compression to be adaptive */
+module_param(adjust_compression, int, 0444);
+MODULE_PARM_DESC(adjust_compression, " Set the ADPCM compression for the device.  Default: 1 (On)");
 
 /* To help people with Black and White output with using s-video input.
  * Some cables and input device are wired differently. */
-static int SwitchSVideoInput;
-module_param(SwitchSVideoInput, int, 0444);
-MODULE_PARM_DESC(SwitchSVideoInput, " Set the S-Video input.  Some cables and input device are wired differently. Default: 0 (Off)");
+static int switch_svideo_input;
+module_param(switch_svideo_input, int, 0444);
+MODULE_PARM_DESC(switch_svideo_input, " Set the S-Video input.  Some cables and input device are wired differently. Default: 0 (Off)");
 
-static unsigned int adjust_X_Offset = -1;
-module_param(adjust_X_Offset, int, 0644);
-MODULE_PARM_DESC(adjust_X_Offset, "adjust X offset display [core]");
+static unsigned int adjust_x_offset = -1;
+module_param(adjust_x_offset, int, 0644);
+MODULE_PARM_DESC(adjust_x_offset, "adjust X offset display [core]");
 
-static unsigned int adjust_Y_Offset = -1;
-module_param(adjust_Y_Offset, int, 0644);
-MODULE_PARM_DESC(adjust_Y_Offset, "adjust Y offset display [core]");
+static unsigned int adjust_y_offset = -1;
+module_param(adjust_y_offset, int, 0644);
+MODULE_PARM_DESC(adjust_y_offset, "adjust Y offset display [core]");
 
 
 #define	ENABLE_HEXDUMP	0	/* Enable if you need it */
@@ -82,15 +82,15 @@ MODULE_PARM_DESC(adjust_Y_Offset, "adjust Y offset display [core]");
 				__func__, __LINE__ , ## args); \
 	}
 #else
-	#define PDEBUG(level, fmt, args...) do {} while(0)
+	#define PDEBUG(level, fmt, args...) do {} while (0)
 #endif
 
-#define DBG_HEADER	1<<0
-#define DBG_IRQ		1<<1
-#define DBG_ISOC	1<<2
-#define DBG_PARSE	1<<3
-#define DBG_SCRATCH	1<<4
-#define DBG_FUNC	1<<5
+#define DBG_HEADER	(1 << 0)
+#define DBG_IRQ		(1 << 1)
+#define DBG_ISOC	(1 << 2)
+#define DBG_PARSE	(1 << 3)
+#define DBG_SCRATCH	(1 << 4)
+#define DBG_FUNC	(1 << 5)
 
 static const int max_imgwidth = MAX_FRAME_WIDTH;
 static const int max_imgheight = MAX_FRAME_HEIGHT;
@@ -103,14 +103,14 @@ static const int min_imgheight = MIN_FRAME_HEIGHT;
  * to work with. This setting can be adjusted, but the default value
  * should be OK for most desktop users.
  */
-#define DEFAULT_SCRATCH_BUF_SIZE	(0x20000)		// 128kB memory scratch buffer
+#define DEFAULT_SCRATCH_BUF_SIZE	(0x20000)		/* 128kB memory scratch buffer */
 static const int scratch_buf_size = DEFAULT_SCRATCH_BUF_SIZE;
 
-// Function prototypes
-static int usbvision_request_intra (struct usb_usbvision *usbvision);
-static int usbvision_unrequest_intra (struct usb_usbvision *usbvision);
-static int usbvision_adjust_compression (struct usb_usbvision *usbvision);
-static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision);
+/* Function prototypes */
+static int usbvision_request_intra(struct usb_usbvision *usbvision);
+static int usbvision_unrequest_intra(struct usb_usbvision *usbvision);
+static int usbvision_adjust_compression(struct usb_usbvision *usbvision);
+static int usbvision_measure_bandwidth(struct usb_usbvision *usbvision);
 
 /*******************************/
 /* Memory management functions */
@@ -176,19 +176,19 @@ static void usbvision_hexdump(const unsigned char *data, int len)
 		k += sprintf(&tmp[k], "%02x ", data[i]);
 	}
 	if (k > 0)
-		printk("%s\n", tmp);
+		printk(KERN_CONT "%s\n", tmp);
 }
 #endif
 
 /********************************
  * scratch ring buffer handling
  ********************************/
-static int scratch_len(struct usb_usbvision *usbvision)    /*This returns the amount of data actually in the buffer */
+static int scratch_len(struct usb_usbvision *usbvision)    /* This returns the amount of data actually in the buffer */
 {
 	int len = usbvision->scratch_write_ptr - usbvision->scratch_read_ptr;
-	if (len < 0) {
+
+	if (len < 0)
 		len += scratch_buf_size;
-	}
 	PDEBUG(DBG_SCRATCH, "scratch_len() = %d\n", len);
 
 	return len;
@@ -199,9 +199,8 @@ static int scratch_len(struct usb_usbvision *usbvision)    /*This returns the am
 static int scratch_free(struct usb_usbvision *usbvision)
 {
 	int free = usbvision->scratch_read_ptr - usbvision->scratch_write_ptr;
-	if (free <= 0) {
+	if (free <= 0)
 		free += scratch_buf_size;
-	}
 	if (free) {
 		free -= 1;							/* at least one byte in the buffer must */
 										/* left blank, otherwise there is no chance to differ between full and empty */
@@ -221,14 +220,12 @@ static int scratch_put(struct usb_usbvision *usbvision, unsigned char *data,
 	if (usbvision->scratch_write_ptr + len < scratch_buf_size) {
 		memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len);
 		usbvision->scratch_write_ptr += len;
-	}
-	else {
+	} else {
 		len_part = scratch_buf_size - usbvision->scratch_write_ptr;
 		memcpy(usbvision->scratch + usbvision->scratch_write_ptr, data, len_part);
 		if (len == len_part) {
 			usbvision->scratch_write_ptr = 0;			/* just set write_ptr to zero */
-		}
-		else {
+		} else {
 			memcpy(usbvision->scratch, data + len_part, len - len_part);
 			usbvision->scratch_write_ptr = len - len_part;
 		}
@@ -255,17 +252,16 @@ static int scratch_get_extra(struct usb_usbvision *usbvision,
 			     unsigned char *data, int *ptr, int len)
 {
 	int len_part;
+
 	if (*ptr + len < scratch_buf_size) {
 		memcpy(data, usbvision->scratch + *ptr, len);
 		*ptr += len;
-	}
-	else {
+	} else {
 		len_part = scratch_buf_size - *ptr;
 		memcpy(data, usbvision->scratch + *ptr, len_part);
 		if (len == len_part) {
 			*ptr = 0;							/* just set the y_ptr to zero */
-		}
-		else {
+		} else {
 			memcpy(data + len_part, usbvision->scratch, len - len_part);
 			*ptr = len - len_part;
 		}
@@ -281,13 +277,13 @@ static int scratch_get_extra(struct usb_usbvision *usbvision,
 static void scratch_set_extra_ptr(struct usb_usbvision *usbvision, int *ptr,
 				  int len)
 {
-	*ptr = (usbvision->scratch_read_ptr + len)%scratch_buf_size;
+	*ptr = (usbvision->scratch_read_ptr + len) % scratch_buf_size;
 
 	PDEBUG(DBG_SCRATCH, "ptr=%d\n", *ptr);
 }
 
 
-/*This increments the scratch extra read pointer */
+/* This increments the scratch extra read pointer */
 static void scratch_inc_extra_ptr(int *ptr, int len)
 {
 	*ptr = (*ptr + len) % scratch_buf_size;
@@ -301,17 +297,16 @@ static int scratch_get(struct usb_usbvision *usbvision, unsigned char *data,
 		       int len)
 {
 	int len_part;
+
 	if (usbvision->scratch_read_ptr + len < scratch_buf_size) {
 		memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len);
 		usbvision->scratch_read_ptr += len;
-	}
-	else {
+	} else {
 		len_part = scratch_buf_size - usbvision->scratch_read_ptr;
 		memcpy(data, usbvision->scratch + usbvision->scratch_read_ptr, len_part);
 		if (len == len_part) {
 			usbvision->scratch_read_ptr = 0;				/* just set the read_ptr to zero */
-		}
-		else {
+		} else {
 			memcpy(data + len_part, usbvision->scratch, len - len_part);
 			usbvision->scratch_read_ptr = len - len_part;
 		}
@@ -327,7 +322,7 @@ static int scratch_get(struct usb_usbvision *usbvision, unsigned char *data,
 static int scratch_get_header(struct usb_usbvision *usbvision,
 			      struct usbvision_frame_header *header)
 {
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_SCRATCH, "from read_ptr=%d", usbvision->scratch_headermarker_read_ptr);
 
@@ -340,29 +335,28 @@ static int scratch_get_header(struct usb_usbvision *usbvision,
 		scratch_get(usbvision, (unsigned char *)header, USBVISION_HEADER_LENGTH);
 		if ((header->magic_1 == USBVISION_MAGIC_1)
 			 && (header->magic_2 == USBVISION_MAGIC_2)
-			 && (header->headerLength == USBVISION_HEADER_LENGTH)) {
-			errCode = USBVISION_HEADER_LENGTH;
-			header->frameWidth  = header->frameWidthLo  + (header->frameWidthHi << 8);
-			header->frameHeight = header->frameHeightLo + (header->frameHeightHi << 8);
+			 && (header->header_length == USBVISION_HEADER_LENGTH)) {
+			err_code = USBVISION_HEADER_LENGTH;
+			header->frame_width  = header->frame_width_lo  + (header->frame_width_hi << 8);
+			header->frame_height = header->frame_height_lo + (header->frame_height_hi << 8);
 			break;
 		}
 	}
 
-	return errCode;
+	return err_code;
 }
 
 
-/*This removes len bytes of old data from the buffer */
+/* This removes len bytes of old data from the buffer */
 static void scratch_rm_old(struct usb_usbvision *usbvision, int len)
 {
-
 	usbvision->scratch_read_ptr += len;
 	usbvision->scratch_read_ptr %= scratch_buf_size;
 	PDEBUG(DBG_SCRATCH, "read_ptr is now %d\n", usbvision->scratch_read_ptr);
 }
 
 
-/*This resets the buffer - kills all data in it too */
+/* This resets the buffer - kills all data in it too */
 static void scratch_reset(struct usb_usbvision *usbvision)
 {
 	PDEBUG(DBG_SCRATCH, "\n");
@@ -371,14 +365,14 @@ static void scratch_reset(struct usb_usbvision *usbvision)
 	usbvision->scratch_write_ptr = 0;
 	usbvision->scratch_headermarker_read_ptr = 0;
 	usbvision->scratch_headermarker_write_ptr = 0;
-	usbvision->isocstate = IsocState_NoFrame;
+	usbvision->isocstate = isoc_state_no_frame;
 }
 
 int usbvision_scratch_alloc(struct usb_usbvision *usbvision)
 {
 	usbvision->scratch = vmalloc_32(scratch_buf_size);
 	scratch_reset(usbvision);
-	if(usbvision->scratch == NULL) {
+	if (usbvision->scratch == NULL) {
 		dev_err(&usbvision->dev->dev,
 			"%s: unable to allocate %d bytes for scratch\n",
 				__func__, scratch_buf_size);
@@ -391,7 +385,6 @@ void usbvision_scratch_free(struct usb_usbvision *usbvision)
 {
 	vfree(usbvision->scratch);
 	usbvision->scratch = NULL;
-
 }
 
 /*
@@ -420,13 +413,13 @@ static void usbvision_testpattern(struct usb_usbvision *usbvision,
 		printk(KERN_ERR "%s: usbvision == NULL\n", proc);
 		return;
 	}
-	if (usbvision->curFrame == NULL) {
-		printk(KERN_ERR "%s: usbvision->curFrame is NULL.\n", proc);
+	if (usbvision->cur_frame == NULL) {
+		printk(KERN_ERR "%s: usbvision->cur_frame is NULL.\n", proc);
 		return;
 	}
 
 	/* Grab the current frame */
-	frame = usbvision->curFrame;
+	frame = usbvision->cur_frame;
 
 	/* Optionally start at the beginning */
 	if (fullframe) {
@@ -473,10 +466,9 @@ static void usbvision_testpattern(struct usb_usbvision *usbvision,
 		}
 	}
 
-	frame->grabstate = FrameState_Done;
+	frame->grabstate = frame_state_done;
 	frame->scanlength += scan_length;
 	++num_pass;
-
 }
 
 /*
@@ -487,8 +479,9 @@ static void usbvision_testpattern(struct usb_usbvision *usbvision,
 int usbvision_decompress_alloc(struct usb_usbvision *usbvision)
 {
 	int IFB_size = MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * 3 / 2;
-	usbvision->IntraFrameBuffer = vmalloc_32(IFB_size);
-	if (usbvision->IntraFrameBuffer == NULL) {
+
+	usbvision->intra_frame_buffer = vmalloc_32(IFB_size);
+	if (usbvision->intra_frame_buffer == NULL) {
 		dev_err(&usbvision->dev->dev,
 			"%s: unable to allocate %d for compr. frame buffer\n",
 				__func__, IFB_size);
@@ -504,8 +497,8 @@ int usbvision_decompress_alloc(struct usb_usbvision *usbvision)
  */
 void usbvision_decompress_free(struct usb_usbvision *usbvision)
 {
-	vfree(usbvision->IntraFrameBuffer);
-	usbvision->IntraFrameBuffer = NULL;
+	vfree(usbvision->intra_frame_buffer);
+	usbvision->intra_frame_buffer = NULL;
 
 }
 
@@ -517,117 +510,111 @@ void usbvision_decompress_free(struct usb_usbvision *usbvision)
  *
  * Locate one of supported header markers in the scratch buffer.
  */
-static enum ParseState usbvision_find_header(struct usb_usbvision *usbvision)
+static enum parse_state usbvision_find_header(struct usb_usbvision *usbvision)
 {
 	struct usbvision_frame *frame;
-	int foundHeader = 0;
+	int found_header = 0;
 
-	frame = usbvision->curFrame;
+	frame = usbvision->cur_frame;
 
-	while (scratch_get_header(usbvision, &frame->isocHeader) == USBVISION_HEADER_LENGTH) {
-		// found header in scratch
+	while (scratch_get_header(usbvision, &frame->isoc_header) == USBVISION_HEADER_LENGTH) {
+		/* found header in scratch */
 		PDEBUG(DBG_HEADER, "found header: 0x%02x%02x %d %d %d %d %#x 0x%02x %u %u",
-				frame->isocHeader.magic_2,
-				frame->isocHeader.magic_1,
-				frame->isocHeader.headerLength,
-				frame->isocHeader.frameNum,
-				frame->isocHeader.framePhase,
-				frame->isocHeader.frameLatency,
-				frame->isocHeader.dataFormat,
-				frame->isocHeader.formatParam,
-				frame->isocHeader.frameWidth,
-				frame->isocHeader.frameHeight);
-
-		if (usbvision->requestIntra) {
-			if (frame->isocHeader.formatParam & 0x80) {
-				foundHeader = 1;
-				usbvision->lastIsocFrameNum = -1; // do not check for lost frames this time
+				frame->isoc_header.magic_2,
+				frame->isoc_header.magic_1,
+				frame->isoc_header.header_length,
+				frame->isoc_header.frame_num,
+				frame->isoc_header.frame_phase,
+				frame->isoc_header.frame_latency,
+				frame->isoc_header.data_format,
+				frame->isoc_header.format_param,
+				frame->isoc_header.frame_width,
+				frame->isoc_header.frame_height);
+
+		if (usbvision->request_intra) {
+			if (frame->isoc_header.format_param & 0x80) {
+				found_header = 1;
+				usbvision->last_isoc_frame_num = -1; /* do not check for lost frames this time */
 				usbvision_unrequest_intra(usbvision);
 				break;
 			}
-		}
-		else {
-			foundHeader = 1;
+		} else {
+			found_header = 1;
 			break;
 		}
 	}
 
-	if (foundHeader) {
-		frame->frmwidth = frame->isocHeader.frameWidth * usbvision->stretch_width;
-		frame->frmheight = frame->isocHeader.frameHeight * usbvision->stretch_height;
-		frame->v4l2_linesize = (frame->frmwidth * frame->v4l2_format.depth)>> 3;
-	}
-	else { // no header found
+	if (found_header) {
+		frame->frmwidth = frame->isoc_header.frame_width * usbvision->stretch_width;
+		frame->frmheight = frame->isoc_header.frame_height * usbvision->stretch_height;
+		frame->v4l2_linesize = (frame->frmwidth * frame->v4l2_format.depth) >> 3;
+	} else { /* no header found */
 		PDEBUG(DBG_HEADER, "skipping scratch data, no header");
 		scratch_reset(usbvision);
-		return ParseState_EndParse;
+		return parse_state_end_parse;
 	}
 
-	// found header
-	if (frame->isocHeader.dataFormat==ISOC_MODE_COMPRESS) {
-		//check isocHeader.frameNum for lost frames
-		if (usbvision->lastIsocFrameNum >= 0) {
-			if (((usbvision->lastIsocFrameNum + 1) % 32) != frame->isocHeader.frameNum) {
-				// unexpected frame drop: need to request new intra frame
-				PDEBUG(DBG_HEADER, "Lost frame before %d on USB", frame->isocHeader.frameNum);
+	/* found header */
+	if (frame->isoc_header.data_format == ISOC_MODE_COMPRESS) {
+		/* check isoc_header.frame_num for lost frames */
+		if (usbvision->last_isoc_frame_num >= 0) {
+			if (((usbvision->last_isoc_frame_num + 1) % 32) != frame->isoc_header.frame_num) {
+				/* unexpected frame drop: need to request new intra frame */
+				PDEBUG(DBG_HEADER, "Lost frame before %d on USB", frame->isoc_header.frame_num);
 				usbvision_request_intra(usbvision);
-				return ParseState_NextFrame;
+				return parse_state_next_frame;
 			}
 		}
-		usbvision->lastIsocFrameNum = frame->isocHeader.frameNum;
+		usbvision->last_isoc_frame_num = frame->isoc_header.frame_num;
 	}
 	usbvision->header_count++;
-	frame->scanstate = ScanState_Lines;
+	frame->scanstate = scan_state_lines;
 	frame->curline = 0;
 
 	if (force_testpattern) {
 		usbvision_testpattern(usbvision, 1, 1);
-		return ParseState_NextFrame;
+		return parse_state_next_frame;
 	}
-	return ParseState_Continue;
+	return parse_state_continue;
 }
 
-static enum ParseState usbvision_parse_lines_422(struct usb_usbvision *usbvision,
+static enum parse_state usbvision_parse_lines_422(struct usb_usbvision *usbvision,
 					   long *pcopylen)
 {
 	volatile struct usbvision_frame *frame;
 	unsigned char *f;
 	int len;
 	int i;
-	unsigned char yuyv[4]={180, 128, 10, 128}; // YUV components
-	unsigned char rv, gv, bv;	// RGB components
+	unsigned char yuyv[4] = { 180, 128, 10, 128 }; /* YUV components */
+	unsigned char rv, gv, bv;	/* RGB components */
 	int clipmask_index, bytes_per_pixel;
 	int stretch_bytes, clipmask_add;
 
-	frame  = usbvision->curFrame;
+	frame  = usbvision->cur_frame;
 	f = frame->data + (frame->v4l2_linesize * frame->curline);
 
 	/* Make sure there's enough data for the entire line */
-	len = (frame->isocHeader.frameWidth * 2)+5;
+	len = (frame->isoc_header.frame_width * 2) + 5;
 	if (scratch_len(usbvision) < len) {
 		PDEBUG(DBG_PARSE, "out of data in line %d, need %u.\n", frame->curline, len);
-		return ParseState_Out;
+		return parse_state_out;
 	}
 
-	if ((frame->curline + 1) >= frame->frmheight) {
-		return ParseState_NextFrame;
-	}
+	if ((frame->curline + 1) >= frame->frmheight)
+		return parse_state_next_frame;
 
 	bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
 	stretch_bytes = (usbvision->stretch_width - 1) * bytes_per_pixel;
 	clipmask_index = frame->curline * MAX_FRAME_WIDTH;
 	clipmask_add = usbvision->stretch_width;
 
-	for (i = 0; i < frame->frmwidth; i+=(2 * usbvision->stretch_width)) {
-
+	for (i = 0; i < frame->frmwidth; i += (2 * usbvision->stretch_width)) {
 		scratch_get(usbvision, &yuyv[0], 4);
 
 		if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
-			*f++ = yuyv[0]; // Y
-			*f++ = yuyv[3]; // U
-		}
-		else {
-
+			*f++ = yuyv[0]; /* Y */
+			*f++ = yuyv[3]; /* U */
+		} else {
 			YUV_TO_RGB_BY_THE_BOOK(yuyv[0], yuyv[1], yuyv[3], rv, gv, bv);
 			switch (frame->v4l2_format.format) {
 			case V4L2_PIX_FMT_RGB565:
@@ -659,11 +646,9 @@ static enum ParseState usbvision_parse_lines_422(struct usb_usbvision *usbvision
 		f += stretch_bytes;
 
 		if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
-			*f++ = yuyv[2]; // Y
-			*f++ = yuyv[1]; // V
-		}
-		else {
-
+			*f++ = yuyv[2]; /* Y */
+			*f++ = yuyv[1]; /* V */
+		} else {
 			YUV_TO_RGB_BY_THE_BOOK(yuyv[2], yuyv[1], yuyv[3], rv, gv, bv);
 			switch (frame->v4l2_format.format) {
 			case V4L2_PIX_FMT_RGB565:
@@ -698,100 +683,94 @@ static enum ParseState usbvision_parse_lines_422(struct usb_usbvision *usbvision
 	frame->curline += usbvision->stretch_height;
 	*pcopylen += frame->v4l2_linesize * usbvision->stretch_height;
 
-	if (frame->curline >= frame->frmheight) {
-		return ParseState_NextFrame;
-	}
-	else {
-		return ParseState_Continue;
-	}
+	if (frame->curline >= frame->frmheight)
+		return parse_state_next_frame;
+	return parse_state_continue;
 }
 
 /* The decompression routine  */
-static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *Compressed,
-								unsigned char *Decompressed, int *StartPos,
-								int *BlockTypeStartPos, int Len)
+static int usbvision_decompress(struct usb_usbvision *usbvision, unsigned char *compressed,
+								unsigned char *decompressed, int *start_pos,
+								int *block_typestart_pos, int len)
 {
-	int RestPixel, Idx, MaxPos, Pos, ExtraPos, BlockLen, BlockTypePos, BlockTypeLen;
-	unsigned char BlockByte, BlockCode, BlockType, BlockTypeByte, Integrator;
-
-	Integrator = 0;
-	Pos = *StartPos;
-	BlockTypePos = *BlockTypeStartPos;
-	MaxPos = 396; //Pos + Len;
-	ExtraPos = Pos;
-	BlockLen = 0;
-	BlockByte = 0;
-	BlockCode = 0;
-	BlockType = 0;
-	BlockTypeByte = 0;
-	BlockTypeLen = 0;
-	RestPixel = Len;
-
-	for (Idx = 0; Idx < Len; Idx++) {
-
-		if (BlockLen == 0) {
-			if (BlockTypeLen==0) {
-				BlockTypeByte = Compressed[BlockTypePos];
-				BlockTypePos++;
-				BlockTypeLen = 4;
+	int rest_pixel, idx, max_pos, pos, extra_pos, block_len, block_type_pos, block_type_len;
+	unsigned char block_byte, block_code, block_type, block_type_byte, integrator;
+
+	integrator = 0;
+	pos = *start_pos;
+	block_type_pos = *block_typestart_pos;
+	max_pos = 396; /* pos + len; */
+	extra_pos = pos;
+	block_len = 0;
+	block_byte = 0;
+	block_code = 0;
+	block_type = 0;
+	block_type_byte = 0;
+	block_type_len = 0;
+	rest_pixel = len;
+
+	for (idx = 0; idx < len; idx++) {
+		if (block_len == 0) {
+			if (block_type_len == 0) {
+				block_type_byte = compressed[block_type_pos];
+				block_type_pos++;
+				block_type_len = 4;
 			}
-			BlockType = (BlockTypeByte & 0xC0) >> 6;
+			block_type = (block_type_byte & 0xC0) >> 6;
 
-			//statistic:
-			usbvision->ComprBlockTypes[BlockType]++;
+			/* statistic: */
+			usbvision->compr_block_types[block_type]++;
 
-			Pos = ExtraPos;
-			if (BlockType == 0) {
-				if(RestPixel >= 24) {
-					Idx += 23;
-					RestPixel -= 24;
-					Integrator = Decompressed[Idx];
+			pos = extra_pos;
+			if (block_type == 0) {
+				if (rest_pixel >= 24) {
+					idx += 23;
+					rest_pixel -= 24;
+					integrator = decompressed[idx];
 				} else {
-					Idx += RestPixel - 1;
-					RestPixel = 0;
+					idx += rest_pixel - 1;
+					rest_pixel = 0;
 				}
 			} else {
-				BlockCode = Compressed[Pos];
-				Pos++;
-				if (RestPixel >= 24) {
-					BlockLen  = 24;
-				} else {
-					BlockLen = RestPixel;
-				}
-				RestPixel -= BlockLen;
-				ExtraPos = Pos + (BlockLen / 4);
+				block_code = compressed[pos];
+				pos++;
+				if (rest_pixel >= 24)
+					block_len  = 24;
+				else
+					block_len = rest_pixel;
+				rest_pixel -= block_len;
+				extra_pos = pos + (block_len / 4);
 			}
-			BlockTypeByte <<= 2;
-			BlockTypeLen -= 1;
+			block_type_byte <<= 2;
+			block_type_len -= 1;
 		}
-		if (BlockLen > 0) {
-			if ((BlockLen%4) == 0) {
-				BlockByte = Compressed[Pos];
-				Pos++;
+		if (block_len > 0) {
+			if ((block_len % 4) == 0) {
+				block_byte = compressed[pos];
+				pos++;
 			}
-			if (BlockType == 1) { //inter Block
-				Integrator = Decompressed[Idx];
-			}
-			switch (BlockByte & 0xC0) {
-				case 0x03<<6:
-					Integrator += Compressed[ExtraPos];
-					ExtraPos++;
-					break;
-				case 0x02<<6:
-					Integrator += BlockCode;
-					break;
-				case 0x00:
-					Integrator -= BlockCode;
-					break;
+			if (block_type == 1) /* inter Block */
+				integrator = decompressed[idx];
+			switch (block_byte & 0xC0) {
+			case 0x03 << 6:
+				integrator += compressed[extra_pos];
+				extra_pos++;
+				break;
+			case 0x02 << 6:
+				integrator += block_code;
+				break;
+			case 0x00:
+				integrator -= block_code;
+				break;
 			}
-			Decompressed[Idx] = Integrator;
-			BlockByte <<= 2;
-			BlockLen -= 1;
+			decompressed[idx] = integrator;
+			block_byte <<= 2;
+			block_len -= 1;
 		}
 	}
-	*StartPos = ExtraPos;
-	*BlockTypeStartPos = BlockTypePos;
-	return Idx;
+	*start_pos = extra_pos;
+	*block_typestart_pos = block_type_pos;
+	return idx;
 }
 
 
@@ -803,7 +782,7 @@ static int usbvision_decompress(struct usb_usbvision *usbvision,unsigned char *C
  * number of bytes (RGB) to the *pcopylen.
  *
  */
-static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
+static enum parse_state usbvision_parse_compress(struct usb_usbvision *usbvision,
 					   long *pcopylen)
 {
 #define USBVISION_STRIP_MAGIC		0x5A
@@ -811,191 +790,165 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
 #define USBVISION_STRIP_HEADER_LEN	3
 
 	struct usbvision_frame *frame;
-	unsigned char *f,*u = NULL ,*v = NULL;
-	unsigned char StripData[USBVISION_STRIP_LEN_MAX];
-	unsigned char StripHeader[USBVISION_STRIP_HEADER_LEN];
-	int Idx, IdxEnd, StripLen, StripPtr, StartBlockPos, BlockPos, BlockTypePos;
+	unsigned char *f, *u = NULL, *v = NULL;
+	unsigned char strip_data[USBVISION_STRIP_LEN_MAX];
+	unsigned char strip_header[USBVISION_STRIP_HEADER_LEN];
+	int idx, idx_end, strip_len, strip_ptr, startblock_pos, block_pos, block_type_pos;
 	int clipmask_index, bytes_per_pixel, rc;
-	int imageSize;
+	int image_size;
 	unsigned char rv, gv, bv;
 	static unsigned char *Y, *U, *V;
 
-	frame  = usbvision->curFrame;
-	imageSize = frame->frmwidth * frame->frmheight;
-	if ( (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) ||
-	     (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) ) {       // this is a planar format
-		//... v4l2_linesize not used here.
+	frame = usbvision->cur_frame;
+	image_size = frame->frmwidth * frame->frmheight;
+	if ((frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) ||
+	    (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420)) {       /* this is a planar format */
+		/* ... v4l2_linesize not used here. */
 		f = frame->data + (frame->width * frame->curline);
 	} else
 		f = frame->data + (frame->v4l2_linesize * frame->curline);
 
-	if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV){ //initialise u and v pointers
-		// get base of u and b planes add halfoffset
-
+	if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) { /* initialise u and v pointers */
+		/* get base of u and b planes add halfoffset */
 		u = frame->data
-			+ imageSize
-			+ (frame->frmwidth >>1) * frame->curline ;
-		v = u + (imageSize >>1 );
-
-	} else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420){
-
-		v = frame->data + imageSize + ((frame->curline* (frame->width))>>2) ;
-		u = v + (imageSize >>2) ;
+			+ image_size
+			+ (frame->frmwidth >> 1) * frame->curline;
+		v = u + (image_size >> 1);
+	} else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) {
+		v = frame->data + image_size + ((frame->curline * (frame->width)) >> 2);
+		u = v + (image_size >> 2);
 	}
 
-	if (frame->curline == 0) {
+	if (frame->curline == 0)
 		usbvision_adjust_compression(usbvision);
-	}
 
-	if (scratch_len(usbvision) < USBVISION_STRIP_HEADER_LEN) {
-		return ParseState_Out;
-	}
+	if (scratch_len(usbvision) < USBVISION_STRIP_HEADER_LEN)
+		return parse_state_out;
 
-	//get strip header without changing the scratch_read_ptr
-	scratch_set_extra_ptr(usbvision, &StripPtr, 0);
-	scratch_get_extra(usbvision, &StripHeader[0], &StripPtr,
+	/* get strip header without changing the scratch_read_ptr */
+	scratch_set_extra_ptr(usbvision, &strip_ptr, 0);
+	scratch_get_extra(usbvision, &strip_header[0], &strip_ptr,
 				USBVISION_STRIP_HEADER_LEN);
 
-	if (StripHeader[0] != USBVISION_STRIP_MAGIC) {
-		// wrong strip magic
-		usbvision->stripMagicErrors++;
-		return ParseState_NextFrame;
+	if (strip_header[0] != USBVISION_STRIP_MAGIC) {
+		/* wrong strip magic */
+		usbvision->strip_magic_errors++;
+		return parse_state_next_frame;
 	}
 
-	if (frame->curline != (int)StripHeader[2]) {
-		//line number missmatch error
-		usbvision->stripLineNumberErrors++;
+	if (frame->curline != (int)strip_header[2]) {
+		/* line number mismatch error */
+		usbvision->strip_line_number_errors++;
 	}
 
-	StripLen = 2 * (unsigned int)StripHeader[1];
-	if (StripLen > USBVISION_STRIP_LEN_MAX) {
-		// strip overrun
-		// I think this never happens
+	strip_len = 2 * (unsigned int)strip_header[1];
+	if (strip_len > USBVISION_STRIP_LEN_MAX) {
+		/* strip overrun */
+		/* I think this never happens */
 		usbvision_request_intra(usbvision);
 	}
 
-	if (scratch_len(usbvision) < StripLen) {
-		//there is not enough data for the strip
-		return ParseState_Out;
+	if (scratch_len(usbvision) < strip_len) {
+		/* there is not enough data for the strip */
+		return parse_state_out;
 	}
 
-	if (usbvision->IntraFrameBuffer) {
-		Y = usbvision->IntraFrameBuffer + frame->frmwidth * frame->curline;
-		U = usbvision->IntraFrameBuffer + imageSize + (frame->frmwidth / 2) * (frame->curline / 2);
-		V = usbvision->IntraFrameBuffer + imageSize / 4 * 5 + (frame->frmwidth / 2) * (frame->curline / 2);
-	}
-	else {
-		return ParseState_NextFrame;
+	if (usbvision->intra_frame_buffer) {
+		Y = usbvision->intra_frame_buffer + frame->frmwidth * frame->curline;
+		U = usbvision->intra_frame_buffer + image_size + (frame->frmwidth / 2) * (frame->curline / 2);
+		V = usbvision->intra_frame_buffer + image_size / 4 * 5 + (frame->frmwidth / 2) * (frame->curline / 2);
+	} else {
+		return parse_state_next_frame;
 	}
 
 	bytes_per_pixel = frame->v4l2_format.bytes_per_pixel;
 	clipmask_index = frame->curline * MAX_FRAME_WIDTH;
 
-	scratch_get(usbvision, StripData, StripLen);
+	scratch_get(usbvision, strip_data, strip_len);
 
-	IdxEnd = frame->frmwidth;
-	BlockTypePos = USBVISION_STRIP_HEADER_LEN;
-	StartBlockPos = BlockTypePos + (IdxEnd - 1) / 96 + (IdxEnd / 2 - 1) / 96 + 2;
-	BlockPos = StartBlockPos;
+	idx_end = frame->frmwidth;
+	block_type_pos = USBVISION_STRIP_HEADER_LEN;
+	startblock_pos = block_type_pos + (idx_end - 1) / 96 + (idx_end / 2 - 1) / 96 + 2;
+	block_pos = startblock_pos;
 
-	usbvision->BlockPos = BlockPos;
+	usbvision->block_pos = block_pos;
 
-	if ((rc = usbvision_decompress(usbvision, StripData, Y, &BlockPos, &BlockTypePos, IdxEnd)) != IdxEnd) {
-		//return ParseState_Continue;
-	}
-	if (StripLen > usbvision->maxStripLen) {
-		usbvision->maxStripLen = StripLen;
-	}
+	rc = usbvision_decompress(usbvision, strip_data, Y, &block_pos, &block_type_pos, idx_end);
+	if (strip_len > usbvision->max_strip_len)
+		usbvision->max_strip_len = strip_len;
 
-	if (frame->curline%2) {
-		if ((rc = usbvision_decompress(usbvision, StripData, V, &BlockPos, &BlockTypePos, IdxEnd/2)) != IdxEnd/2) {
-		//return ParseState_Continue;
-		}
-	}
-	else {
-		if ((rc = usbvision_decompress(usbvision, StripData, U, &BlockPos, &BlockTypePos, IdxEnd/2)) != IdxEnd/2) {
-			//return ParseState_Continue;
-		}
-	}
+	if (frame->curline % 2)
+		rc = usbvision_decompress(usbvision, strip_data, V, &block_pos, &block_type_pos, idx_end / 2);
+	else
+		rc = usbvision_decompress(usbvision, strip_data, U, &block_pos, &block_type_pos, idx_end / 2);
 
-	if (BlockPos > usbvision->comprBlockPos) {
-		usbvision->comprBlockPos = BlockPos;
-	}
-	if (BlockPos > StripLen) {
-		usbvision->stripLenErrors++;
-	}
+	if (block_pos > usbvision->comprblock_pos)
+		usbvision->comprblock_pos = block_pos;
+	if (block_pos > strip_len)
+		usbvision->strip_len_errors++;
 
-	for (Idx = 0; Idx < IdxEnd; Idx++) {
-		if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
-			*f++ = Y[Idx];
-			*f++ = Idx & 0x01 ? U[Idx/2] : V[Idx/2];
-		}
-		else if(frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) {
-			*f++ = Y[Idx];
-			if ( Idx & 0x01)
-				*u++ = U[Idx>>1] ;
+	for (idx = 0; idx < idx_end; idx++) {
+		if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+			*f++ = Y[idx];
+			*f++ = idx & 0x01 ? U[idx / 2] : V[idx / 2];
+		} else if (frame->v4l2_format.format == V4L2_PIX_FMT_YUV422P) {
+			*f++ = Y[idx];
+			if (idx & 0x01)
+				*u++ = U[idx >> 1];
 			else
-				*v++ = V[Idx>>1];
-		}
-		else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) {
-			*f++ = Y [Idx];
-			if ( !((  Idx & 0x01  ) | (  frame->curline & 0x01  )) ){
-
-/* 				 only need do this for 1 in 4 pixels */
-/* 				 intraframe buffer is YUV420 format */
-
-				*u++ = U[Idx >>1];
-				*v++ = V[Idx >>1];
+				*v++ = V[idx >> 1];
+		} else if (frame->v4l2_format.format == V4L2_PIX_FMT_YVU420) {
+			*f++ = Y[idx];
+			if (!((idx & 0x01) | (frame->curline & 0x01))) {
+				/* only need do this for 1 in 4 pixels */
+				/* intraframe buffer is YUV420 format */
+				*u++ = U[idx >> 1];
+				*v++ = V[idx >> 1];
 			}
-
-		}
-		else {
-			YUV_TO_RGB_BY_THE_BOOK(Y[Idx], U[Idx/2], V[Idx/2], rv, gv, bv);
+		} else {
+			YUV_TO_RGB_BY_THE_BOOK(Y[idx], U[idx / 2], V[idx / 2], rv, gv, bv);
 			switch (frame->v4l2_format.format) {
-				case V4L2_PIX_FMT_GREY:
-					*f++ = Y[Idx];
-					break;
-				case V4L2_PIX_FMT_RGB555:
-					*f++ = (0x1F & rv) |
-						(0xE0 & (gv << 5));
-					*f++ = (0x03 & (gv >> 3)) |
-						(0x7C & (bv << 2));
-					break;
-				case V4L2_PIX_FMT_RGB565:
-					*f++ = (0x1F & rv) |
-						(0xE0 & (gv << 5));
-					*f++ = (0x07 & (gv >> 3)) |
-						(0xF8 &  bv);
-					break;
-				case V4L2_PIX_FMT_RGB24:
-					*f++ = rv;
-					*f++ = gv;
-					*f++ = bv;
-					break;
-				case V4L2_PIX_FMT_RGB32:
-					*f++ = rv;
-					*f++ = gv;
-					*f++ = bv;
-					f++;
-					break;
+			case V4L2_PIX_FMT_GREY:
+				*f++ = Y[idx];
+				break;
+			case V4L2_PIX_FMT_RGB555:
+				*f++ = (0x1F & rv) |
+					(0xE0 & (gv << 5));
+				*f++ = (0x03 & (gv >> 3)) |
+					(0x7C & (bv << 2));
+				break;
+			case V4L2_PIX_FMT_RGB565:
+				*f++ = (0x1F & rv) |
+					(0xE0 & (gv << 5));
+				*f++ = (0x07 & (gv >> 3)) |
+					(0xF8 & bv);
+				break;
+			case V4L2_PIX_FMT_RGB24:
+				*f++ = rv;
+				*f++ = gv;
+				*f++ = bv;
+				break;
+			case V4L2_PIX_FMT_RGB32:
+				*f++ = rv;
+				*f++ = gv;
+				*f++ = bv;
+				f++;
+				break;
 			}
 		}
 		clipmask_index++;
 	}
 	/* Deal with non-integer no. of bytes for YUV420P */
-	if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420 )
+	if (frame->v4l2_format.format != V4L2_PIX_FMT_YVU420)
 		*pcopylen += frame->v4l2_linesize;
 	else
 		*pcopylen += frame->curline & 0x01 ? frame->v4l2_linesize : frame->v4l2_linesize << 1;
 
 	frame->curline += 1;
 
-	if (frame->curline >= frame->frmheight) {
-		return ParseState_NextFrame;
-	}
-	else {
-		return ParseState_Continue;
-	}
+	if (frame->curline >= frame->frmheight)
+		return parse_state_next_frame;
+	return parse_state_continue;
 
 }
 
@@ -1008,7 +961,7 @@ static enum ParseState usbvision_parse_compress(struct usb_usbvision *usbvision,
  * number of bytes (RGB) to the *pcopylen.
  *
  */
-static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision,
+static enum parse_state usbvision_parse_lines_420(struct usb_usbvision *usbvision,
 					   long *pcopylen)
 {
 	struct usbvision_frame *frame;
@@ -1016,11 +969,11 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 	unsigned int pixel_per_line, block;
 	int pixel, block_split;
 	int y_ptr, u_ptr, v_ptr, y_odd_offset;
-	const int   y_block_size = 128;
-	const int  uv_block_size = 64;
+	const int y_block_size = 128;
+	const int uv_block_size = 64;
 	const int sub_block_size = 32;
-	const int y_step[] = { 0, 0, 0, 2 },  y_step_size = 4;
-	const int uv_step[]= { 0, 0, 0, 4 }, uv_step_size = 4;
+	const int y_step[] = { 0, 0, 0, 2 }, y_step_size = 4;
+	const int uv_step[] = { 0, 0, 0, 4 }, uv_step_size = 4;
 	unsigned char y[2], u, v;	/* YUV components */
 	int y_, u_, v_, vb, uvg, ur;
 	int r_, g_, b_;			/* RGB components */
@@ -1028,7 +981,7 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 	int clipmask_even_index, clipmask_odd_index, bytes_per_pixel;
 	int clipmask_add, stretch_bytes;
 
-	frame  = usbvision->curFrame;
+	frame  = usbvision->cur_frame;
 	f_even = frame->data + (frame->v4l2_linesize * frame->curline);
 	f_odd  = f_even + frame->v4l2_linesize * usbvision->stretch_height;
 
@@ -1040,18 +993,17 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 	clipmask_even_index = frame->curline * MAX_FRAME_WIDTH;
 	clipmask_odd_index  = clipmask_even_index + MAX_FRAME_WIDTH;
 	clipmask_add = usbvision->stretch_width;
-	pixel_per_line = frame->isocHeader.frameWidth;
+	pixel_per_line = frame->isoc_header.frame_width;
 
 	if (scratch_len(usbvision) < (int)pixel_per_line * 3) {
-		//printk(KERN_DEBUG "out of data, need %d\n", len);
-		return ParseState_Out;
+		/* printk(KERN_DEBUG "out of data, need %d\n", len); */
+		return parse_state_out;
 	}
 
-	if ((frame->curline + 1) >= frame->frmheight) {
-		return ParseState_NextFrame;
-	}
+	if ((frame->curline + 1) >= frame->frmheight)
+		return parse_state_next_frame;
 
-	block_split = (pixel_per_line%y_block_size) ? 1 : 0;	//are some blocks splitted into different lines?
+	block_split = (pixel_per_line%y_block_size) ? 1 : 0;	/* are some blocks splitted into different lines? */
 
 	y_odd_offset = (pixel_per_line / y_block_size) * (y_block_size + uv_block_size)
 			+ block_split * uv_block_size;
@@ -1061,31 +1013,27 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 	scratch_set_extra_ptr(usbvision, &v_ptr, y_odd_offset
 			+ (4 - block_split) * sub_block_size);
 
-	for (block = 0; block < (pixel_per_line / sub_block_size);
-	     block++) {
-
-
-		for (pixel = 0; pixel < sub_block_size; pixel +=2) {
+	for (block = 0; block < (pixel_per_line / sub_block_size); block++) {
+		for (pixel = 0; pixel < sub_block_size; pixel += 2) {
 			scratch_get(usbvision, &y[0], 2);
 			scratch_get_extra(usbvision, &u, &u_ptr, 1);
 			scratch_get_extra(usbvision, &v, &v_ptr, 1);
 
-			//I don't use the YUV_TO_RGB macro for better performance
+			/* I don't use the YUV_TO_RGB macro for better performance */
 			v_ = v - 128;
 			u_ = u - 128;
-			vb =              132252 * v_;
-			uvg= -53281 * u_ - 25625 * v_;
+			vb = 132252 * v_;
+			uvg = -53281 * u_ - 25625 * v_;
 			ur = 104595 * u_;
 
-			if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+			if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 				*f_even++ = y[0];
 				*f_even++ = v;
-			}
-			else {
+			} else {
 				y_ = 76284 * (y[0] - 16);
 
 				b_ = (y_ + vb) >> 16;
-				g_ = (y_ + uvg)>> 16;
+				g_ = (y_ + uvg) >> 16;
 				r_ = (y_ + ur) >> 16;
 
 				switch (frame->v4l2_format.format) {
@@ -1121,15 +1069,14 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 			clipmask_even_index += clipmask_add;
 			f_even += stretch_bytes;
 
-			if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+			if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 				*f_even++ = y[1];
 				*f_even++ = u;
-			}
-			else {
+			} else {
 				y_ = 76284 * (y[1] - 16);
 
 				b_ = (y_ + vb) >> 16;
-				g_ = (y_ + uvg)>> 16;
+				g_ = (y_ + uvg) >> 16;
 				r_ = (y_ + ur) >> 16;
 
 				switch (frame->v4l2_format.format) {
@@ -1167,15 +1114,14 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 
 			scratch_get_extra(usbvision, &y[0], &y_ptr, 2);
 
-			if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+			if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 				*f_odd++ = y[0];
 				*f_odd++ = v;
-			}
-			else {
+			} else {
 				y_ = 76284 * (y[0] - 16);
 
 				b_ = (y_ + vb) >> 16;
-				g_ = (y_ + uvg)>> 16;
+				g_ = (y_ + uvg) >> 16;
 				r_ = (y_ + ur) >> 16;
 
 				switch (frame->v4l2_format.format) {
@@ -1211,15 +1157,14 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 			clipmask_odd_index += clipmask_add;
 			f_odd += stretch_bytes;
 
-			if(frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
+			if (frame->v4l2_format.format == V4L2_PIX_FMT_YUYV) {
 				*f_odd++ = y[1];
 				*f_odd++ = u;
-			}
-			else {
+			} else {
 				y_ = 76284 * (y[1] - 16);
 
 				b_ = (y_ + vb) >> 16;
-				g_ = (y_ + uvg)>> 16;
+				g_ = (y_ + uvg) >> 16;
 				r_ = (y_ + ur) >> 16;
 
 				switch (frame->v4l2_format.format) {
@@ -1256,7 +1201,7 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 			f_odd += stretch_bytes;
 		}
 
-		scratch_rm_old(usbvision,y_step[block % y_step_size] * sub_block_size);
+		scratch_rm_old(usbvision, y_step[block % y_step_size] * sub_block_size);
 		scratch_inc_extra_ptr(&y_ptr, y_step[(block + 2 * block_split) % y_step_size]
 				* sub_block_size);
 		scratch_inc_extra_ptr(&u_ptr, uv_step[block % uv_step_size]
@@ -1272,9 +1217,8 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 	*pcopylen += frame->v4l2_linesize * 2 * usbvision->stretch_height;
 
 	if (frame->curline >= frame->frmheight)
-		return ParseState_NextFrame;
-	else
-		return ParseState_Continue;
+		return parse_state_next_frame;
+	return parse_state_continue;
 }
 
 /*
@@ -1288,53 +1232,43 @@ static enum ParseState usbvision_parse_lines_420(struct usb_usbvision *usbvision
 static void usbvision_parse_data(struct usb_usbvision *usbvision)
 {
 	struct usbvision_frame *frame;
-	enum ParseState newstate;
+	enum parse_state newstate;
 	long copylen = 0;
 	unsigned long lock_flags;
 
-	frame = usbvision->curFrame;
+	frame = usbvision->cur_frame;
 
 	PDEBUG(DBG_PARSE, "parsing len=%d\n", scratch_len(usbvision));
 
 	while (1) {
-
-		newstate = ParseState_Out;
+		newstate = parse_state_out;
 		if (scratch_len(usbvision)) {
-			if (frame->scanstate == ScanState_Scanning) {
+			if (frame->scanstate == scan_state_scanning) {
 				newstate = usbvision_find_header(usbvision);
-			}
-			else if (frame->scanstate == ScanState_Lines) {
-				if (usbvision->isocMode == ISOC_MODE_YUV420) {
+			} else if (frame->scanstate == scan_state_lines) {
+				if (usbvision->isoc_mode == ISOC_MODE_YUV420)
 					newstate = usbvision_parse_lines_420(usbvision, &copylen);
-				}
-				else if (usbvision->isocMode == ISOC_MODE_YUV422) {
+				else if (usbvision->isoc_mode == ISOC_MODE_YUV422)
 					newstate = usbvision_parse_lines_422(usbvision, &copylen);
-				}
-				else if (usbvision->isocMode == ISOC_MODE_COMPRESS) {
+				else if (usbvision->isoc_mode == ISOC_MODE_COMPRESS)
 					newstate = usbvision_parse_compress(usbvision, &copylen);
-				}
-
 			}
 		}
-		if (newstate == ParseState_Continue) {
+		if (newstate == parse_state_continue)
 			continue;
-		}
-		else if ((newstate == ParseState_NextFrame) || (newstate == ParseState_Out)) {
+		if ((newstate == parse_state_next_frame) || (newstate == parse_state_out))
 			break;
-		}
-		else {
-			return;	/* ParseState_EndParse */
-		}
+		return;	/* parse_state_end_parse */
 	}
 
-	if (newstate == ParseState_NextFrame) {
-		frame->grabstate = FrameState_Done;
+	if (newstate == parse_state_next_frame) {
+		frame->grabstate = frame_state_done;
 		do_gettimeofday(&(frame->timestamp));
 		frame->sequence = usbvision->frame_num;
 
 		spin_lock_irqsave(&usbvision->queue_lock, lock_flags);
 		list_move_tail(&(frame->frame), &usbvision->outqueue);
-		usbvision->curFrame = NULL;
+		usbvision->cur_frame = NULL;
 		spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
 
 		usbvision->frame_num++;
@@ -1344,10 +1278,9 @@ static void usbvision_parse_data(struct usb_usbvision *usbvision)
 			PDEBUG(DBG_PARSE, "Wake up !");
 			wake_up_interruptible(&usbvision->wait_frame);
 		}
+	} else {
+		frame->grabstate = frame_state_grabbing;
 	}
-	else
-		frame->grabstate = FrameState_Grabbing;
-
 
 	/* Update the frame's uncompressed length. */
 	frame->scanlength += copylen;
@@ -1370,34 +1303,32 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 		packet_data = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
 
 		/* Detect and ignore errored packets */
-		if (packet_stat) {	// packet_stat != 0 ?????????????
+		if (packet_stat) {	/* packet_stat != 0 ????????????? */
 			PDEBUG(DBG_ISOC, "data error: [%d] len=%d, status=%X", i, packet_len, packet_stat);
-			usbvision->isocErrCount++;
+			usbvision->isoc_err_count++;
 			continue;
 		}
 
 		/* Detect and ignore empty packets */
 		if (packet_len < 0) {
 			PDEBUG(DBG_ISOC, "error packet [%d]", i);
-			usbvision->isocSkipCount++;
+			usbvision->isoc_skip_count++;
 			continue;
-		}
-		else if (packet_len == 0) {	/* Frame end ????? */
+		} else if (packet_len == 0) {	/* Frame end ????? */
 			PDEBUG(DBG_ISOC, "null packet [%d]", i);
-			usbvision->isocstate=IsocState_NoFrame;
-			usbvision->isocSkipCount++;
+			usbvision->isocstate = isoc_state_no_frame;
+			usbvision->isoc_skip_count++;
 			continue;
-		}
-		else if (packet_len > usbvision->isocPacketSize) {
-			PDEBUG(DBG_ISOC, "packet[%d] > isocPacketSize", i);
-			usbvision->isocSkipCount++;
+		} else if (packet_len > usbvision->isoc_packet_size) {
+			PDEBUG(DBG_ISOC, "packet[%d] > isoc_packet_size", i);
+			usbvision->isoc_skip_count++;
 			continue;
 		}
 
 		PDEBUG(DBG_ISOC, "packet ok [%d] len=%d", i, packet_len);
 
-		if (usbvision->isocstate==IsocState_NoFrame) { //new frame begins
-			usbvision->isocstate=IsocState_InFrame;
+		if (usbvision->isocstate == isoc_state_no_frame) { /* new frame begins */
+			usbvision->isocstate = isoc_state_in_frame;
 			scratch_mark_header(usbvision);
 			usbvision_measure_bandwidth(usbvision);
 			PDEBUG(DBG_ISOC, "packet with header");
@@ -1412,7 +1343,6 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 		 * your favorite evil here.
 		 */
 		if (scratch_free(usbvision) < packet_len) {
-
 			usbvision->scratch_ovf_count++;
 			PDEBUG(DBG_ISOC, "scratch buf overflow! scr_len: %d, n: %d",
 			       scratch_len(usbvision), packet_len);
@@ -1422,12 +1352,13 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 		/* Now we know that there is enough room in scratch buffer */
 		scratch_put(usbvision, packet_data, packet_len);
 		totlen += packet_len;
-		usbvision->isocDataCount += packet_len;
-		usbvision->isocPacketCount++;
+		usbvision->isoc_data_count += packet_len;
+		usbvision->isoc_packet_count++;
 	}
 #if ENABLE_HEXDUMP
 	if (totlen > 0) {
 		static int foo;
+
 		if (foo < 1) {
 			printk(KERN_DEBUG "+%d.\n", usbvision->scratchlen);
 			usbvision_hexdump(data0, (totlen > 64) ? 64 : totlen);
@@ -1435,16 +1366,16 @@ static int usbvision_compress_isochronous(struct usb_usbvision *usbvision,
 		}
 	}
 #endif
- return totlen;
+	return totlen;
 }
 
-static void usbvision_isocIrq(struct urb *urb)
+static void usbvision_isoc_irq(struct urb *urb)
 {
-	int errCode = 0;
+	int err_code = 0;
 	int len;
 	struct usb_usbvision *usbvision = urb->context;
 	int i;
-	unsigned long startTime = jiffies;
+	unsigned long start_time = jiffies;
 	struct usbvision_frame **f;
 
 	/* We don't want to do anything if we are about to be removed! */
@@ -1452,18 +1383,17 @@ static void usbvision_isocIrq(struct urb *urb)
 		return;
 
 	/* any urb with wrong status is ignored without acknowledgement */
-	if (urb->status == -ENOENT) {
+	if (urb->status == -ENOENT)
 		return;
-	}
 
-	f = &usbvision->curFrame;
+	f = &usbvision->cur_frame;
 
 	/* Manage streaming interruption */
-	if (usbvision->streaming == Stream_Interrupt) {
-		usbvision->streaming = Stream_Idle;
+	if (usbvision->streaming == stream_interrupt) {
+		usbvision->streaming = stream_idle;
 		if ((*f)) {
-			(*f)->grabstate = FrameState_Ready;
-			(*f)->scanstate = ScanState_Scanning;
+			(*f)->grabstate = frame_state_ready;
+			(*f)->scanstate = scan_state_scanning;
 		}
 		PDEBUG(DBG_IRQ, "stream interrupted");
 		wake_up_interruptible(&usbvision->wait_stream);
@@ -1472,35 +1402,32 @@ static void usbvision_isocIrq(struct urb *urb)
 	/* Copy the data received into our scratch buffer */
 	len = usbvision_compress_isochronous(usbvision, urb);
 
-	usbvision->isocUrbCount++;
+	usbvision->isoc_urb_count++;
 	usbvision->urb_length = len;
 
-	if (usbvision->streaming == Stream_On) {
-
+	if (usbvision->streaming == stream_on) {
 		/* If we collected enough data let's parse! */
-		if ((scratch_len(usbvision) > USBVISION_HEADER_LENGTH) &&
-		    (!list_empty(&(usbvision->inqueue))) ) {
+		if (scratch_len(usbvision) > USBVISION_HEADER_LENGTH &&
+		    !list_empty(&(usbvision->inqueue))) {
 			if (!(*f)) {
 				(*f) = list_entry(usbvision->inqueue.next,
 						  struct usbvision_frame,
 						  frame);
 			}
 			usbvision_parse_data(usbvision);
-		}
-		else {
-			/*If we don't have a frame
+		} else {
+			/* If we don't have a frame
 			  we're current working on, complain */
 			PDEBUG(DBG_IRQ,
 			       "received data, but no one needs it");
 			scratch_reset(usbvision);
 		}
-	}
-	else {
+	} else {
 		PDEBUG(DBG_IRQ, "received data, but no one needs it");
 		scratch_reset(usbvision);
 	}
 
-	usbvision->timeInIrq += jiffies - startTime;
+	usbvision->time_in_irq += jiffies - start_time;
 
 	for (i = 0; i < USBVISION_URB_FRAMES; i++) {
 		urb->iso_frame_desc[i].status = 0;
@@ -1509,12 +1436,12 @@ static void usbvision_isocIrq(struct urb *urb)
 
 	urb->status = 0;
 	urb->dev = usbvision->dev;
-	errCode = usb_submit_urb (urb, GFP_ATOMIC);
+	err_code = usb_submit_urb(urb, GFP_ATOMIC);
 
-	if(errCode) {
+	if (err_code) {
 		dev_err(&usbvision->dev->dev,
 			"%s: usb_submit_urb failed: error %d\n",
-				__func__, errCode);
+				__func__, err_code);
 	}
 
 	return;
@@ -1533,21 +1460,21 @@ static void usbvision_isocIrq(struct urb *urb)
 
 int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg)
 {
-	int errCode = 0;
+	int err_code = 0;
 	unsigned char buffer[1];
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return -1;
 
-	errCode = usb_control_msg(usbvision->dev, usb_rcvctrlpipe(usbvision->dev, 1),
+	err_code = usb_control_msg(usbvision->dev, usb_rcvctrlpipe(usbvision->dev, 1),
 				USBVISION_OP_CODE,
 				USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
 				0, (__u16) reg, buffer, 1, HZ);
 
-	if (errCode < 0) {
+	if (err_code < 0) {
 		dev_err(&usbvision->dev->dev,
-			"%s: failed: error %d\n", __func__, errCode);
-		return errCode;
+			"%s: failed: error %d\n", __func__, err_code);
+		return err_code;
 	}
 	return buffer[0];
 }
@@ -1563,179 +1490,176 @@ int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg)
 int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg,
 			    unsigned char value)
 {
-	int errCode = 0;
+	int err_code = 0;
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return 0;
 
-	errCode = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+	err_code = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
 				USBVISION_OP_CODE,
 				USB_DIR_OUT | USB_TYPE_VENDOR |
 				USB_RECIP_ENDPOINT, 0, (__u16) reg, &value, 1, HZ);
 
-	if (errCode < 0) {
+	if (err_code < 0) {
 		dev_err(&usbvision->dev->dev,
-			"%s: failed: error %d\n", __func__, errCode);
+			"%s: failed: error %d\n", __func__, err_code);
 	}
-	return errCode;
+	return err_code;
 }
 
 
-static void usbvision_ctrlUrb_complete(struct urb *urb)
+static void usbvision_ctrl_urb_complete(struct urb *urb)
 {
 	struct usb_usbvision *usbvision = (struct usb_usbvision *)urb->context;
 
 	PDEBUG(DBG_IRQ, "");
-	usbvision->ctrlUrbBusy = 0;
-	if (waitqueue_active(&usbvision->ctrlUrb_wq)) {
-		wake_up_interruptible(&usbvision->ctrlUrb_wq);
-	}
+	usbvision->ctrl_urb_busy = 0;
+	if (waitqueue_active(&usbvision->ctrl_urb_wq))
+		wake_up_interruptible(&usbvision->ctrl_urb_wq);
 }
 
 
-static int usbvision_write_reg_irq(struct usb_usbvision *usbvision,int address,
-									unsigned char *data, int len)
+static int usbvision_write_reg_irq(struct usb_usbvision *usbvision, int address,
+				unsigned char *data, int len)
 {
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_IRQ, "");
-	if (len > 8) {
+	if (len > 8)
 		return -EFAULT;
-	}
-	if (usbvision->ctrlUrbBusy) {
+	if (usbvision->ctrl_urb_busy)
 		return -EBUSY;
-	}
-	usbvision->ctrlUrbBusy = 1;
-
-	usbvision->ctrlUrbSetup.bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
-	usbvision->ctrlUrbSetup.bRequest     = USBVISION_OP_CODE;
-	usbvision->ctrlUrbSetup.wValue       = 0;
-	usbvision->ctrlUrbSetup.wIndex       = cpu_to_le16(address);
-	usbvision->ctrlUrbSetup.wLength      = cpu_to_le16(len);
-	usb_fill_control_urb (usbvision->ctrlUrb, usbvision->dev,
+	usbvision->ctrl_urb_busy = 1;
+
+	usbvision->ctrl_urb_setup.bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT;
+	usbvision->ctrl_urb_setup.bRequest     = USBVISION_OP_CODE;
+	usbvision->ctrl_urb_setup.wValue       = 0;
+	usbvision->ctrl_urb_setup.wIndex       = cpu_to_le16(address);
+	usbvision->ctrl_urb_setup.wLength      = cpu_to_le16(len);
+	usb_fill_control_urb(usbvision->ctrl_urb, usbvision->dev,
 							usb_sndctrlpipe(usbvision->dev, 1),
-							(unsigned char *)&usbvision->ctrlUrbSetup,
-							(void *)usbvision->ctrlUrbBuffer, len,
-							usbvision_ctrlUrb_complete,
+							(unsigned char *)&usbvision->ctrl_urb_setup,
+							(void *)usbvision->ctrl_urb_buffer, len,
+							usbvision_ctrl_urb_complete,
 							(void *)usbvision);
 
-	memcpy(usbvision->ctrlUrbBuffer, data, len);
+	memcpy(usbvision->ctrl_urb_buffer, data, len);
 
-	errCode = usb_submit_urb(usbvision->ctrlUrb, GFP_ATOMIC);
-	if (errCode < 0) {
-		// error in usb_submit_urb()
-		usbvision->ctrlUrbBusy = 0;
+	err_code = usb_submit_urb(usbvision->ctrl_urb, GFP_ATOMIC);
+	if (err_code < 0) {
+		/* error in usb_submit_urb() */
+		usbvision->ctrl_urb_busy = 0;
 	}
-	PDEBUG(DBG_IRQ, "submit %d byte: error %d", len, errCode);
-	return errCode;
+	PDEBUG(DBG_IRQ, "submit %d byte: error %d", len, err_code);
+	return err_code;
 }
 
 
 static int usbvision_init_compression(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
-
-	usbvision->lastIsocFrameNum = -1;
-	usbvision->isocDataCount = 0;
-	usbvision->isocPacketCount = 0;
-	usbvision->isocSkipCount = 0;
-	usbvision->comprLevel = 50;
-	usbvision->lastComprLevel = -1;
-	usbvision->isocUrbCount = 0;
-	usbvision->requestIntra = 1;
-	usbvision->isocMeasureBandwidthCount = 0;
-
-	return errCode;
+	int err_code = 0;
+
+	usbvision->last_isoc_frame_num = -1;
+	usbvision->isoc_data_count = 0;
+	usbvision->isoc_packet_count = 0;
+	usbvision->isoc_skip_count = 0;
+	usbvision->compr_level = 50;
+	usbvision->last_compr_level = -1;
+	usbvision->isoc_urb_count = 0;
+	usbvision->request_intra = 1;
+	usbvision->isoc_measure_bandwidth_count = 0;
+
+	return err_code;
 }
 
 /* this function measures the used bandwidth since last call
  * return:    0 : no error
- * sets usedBandwidth to 1-100 : 1-100% of full bandwidth resp. to isocPacketSize
+ * sets used_bandwidth to 1-100 : 1-100% of full bandwidth resp. to isoc_packet_size
  */
-static int usbvision_measure_bandwidth (struct usb_usbvision *usbvision)
+static int usbvision_measure_bandwidth(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
-
-	if (usbvision->isocMeasureBandwidthCount < 2) { // this gives an average bandwidth of 3 frames
-		usbvision->isocMeasureBandwidthCount++;
-		return errCode;
-	}
-	if ((usbvision->isocPacketSize > 0) && (usbvision->isocPacketCount > 0)) {
-		usbvision->usedBandwidth = usbvision->isocDataCount /
-					(usbvision->isocPacketCount + usbvision->isocSkipCount) *
-					100 / usbvision->isocPacketSize;
-	}
-	usbvision->isocMeasureBandwidthCount = 0;
-	usbvision->isocDataCount = 0;
-	usbvision->isocPacketCount = 0;
-	usbvision->isocSkipCount = 0;
-	return errCode;
+	int err_code = 0;
+
+	if (usbvision->isoc_measure_bandwidth_count < 2) { /* this gives an average bandwidth of 3 frames */
+		usbvision->isoc_measure_bandwidth_count++;
+		return err_code;
+	}
+	if ((usbvision->isoc_packet_size > 0) && (usbvision->isoc_packet_count > 0)) {
+		usbvision->used_bandwidth = usbvision->isoc_data_count /
+					(usbvision->isoc_packet_count + usbvision->isoc_skip_count) *
+					100 / usbvision->isoc_packet_size;
+	}
+	usbvision->isoc_measure_bandwidth_count = 0;
+	usbvision->isoc_data_count = 0;
+	usbvision->isoc_packet_count = 0;
+	usbvision->isoc_skip_count = 0;
+	return err_code;
 }
 
-static int usbvision_adjust_compression (struct usb_usbvision *usbvision)
+static int usbvision_adjust_compression(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 	unsigned char buffer[6];
 
 	PDEBUG(DBG_IRQ, "");
-	if ((adjustCompression) && (usbvision->usedBandwidth > 0)) {
-		usbvision->comprLevel += (usbvision->usedBandwidth - 90) / 2;
-		RESTRICT_TO_RANGE(usbvision->comprLevel, 0, 100);
-		if (usbvision->comprLevel != usbvision->lastComprLevel) {
-			int distorsion;
-			if (usbvision->bridgeType == BRIDGE_NT1004 || usbvision->bridgeType == BRIDGE_NT1005) {
-				buffer[0] = (unsigned char)(4 + 16 * usbvision->comprLevel / 100);	// PCM Threshold 1
-				buffer[1] = (unsigned char)(4 + 8 * usbvision->comprLevel / 100);	// PCM Threshold 2
-				distorsion = 7 + 248 * usbvision->comprLevel / 100;
-				buffer[2] = (unsigned char)(distorsion & 0xFF);				// Average distorsion Threshold (inter)
-				buffer[3] = (unsigned char)(distorsion & 0xFF);				// Average distorsion Threshold (intra)
-				distorsion = 1 + 42 * usbvision->comprLevel / 100;
-				buffer[4] = (unsigned char)(distorsion & 0xFF);				// Maximum distorsion Threshold (inter)
-				buffer[5] = (unsigned char)(distorsion & 0xFF);				// Maximum distorsion Threshold (intra)
-			}
-			else { //BRIDGE_NT1003
-				buffer[0] = (unsigned char)(4 + 16 * usbvision->comprLevel / 100);	// PCM threshold 1
-				buffer[1] = (unsigned char)(4 + 8 * usbvision->comprLevel / 100);	// PCM threshold 2
-				distorsion = 2 + 253 * usbvision->comprLevel / 100;
-				buffer[2] = (unsigned char)(distorsion & 0xFF);				// distorsion threshold bit0-7
-				buffer[3] = 0; 	//(unsigned char)((distorsion >> 8) & 0x0F);		// distorsion threshold bit 8-11
-				distorsion = 0 + 43 * usbvision->comprLevel / 100;
-				buffer[4] = (unsigned char)(distorsion & 0xFF);				// maximum distorsion bit0-7
-				buffer[5] = 0; //(unsigned char)((distorsion >> 8) & 0x01);		// maximum distorsion bit 8
+	if ((adjust_compression) && (usbvision->used_bandwidth > 0)) {
+		usbvision->compr_level += (usbvision->used_bandwidth - 90) / 2;
+		RESTRICT_TO_RANGE(usbvision->compr_level, 0, 100);
+		if (usbvision->compr_level != usbvision->last_compr_level) {
+			int distortion;
+
+			if (usbvision->bridge_type == BRIDGE_NT1004 || usbvision->bridge_type == BRIDGE_NT1005) {
+				buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100);	/* PCM Threshold 1 */
+				buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100);	/* PCM Threshold 2 */
+				distortion = 7 + 248 * usbvision->compr_level / 100;
+				buffer[2] = (unsigned char)(distortion & 0xFF);				/* Average distortion Threshold (inter) */
+				buffer[3] = (unsigned char)(distortion & 0xFF);				/* Average distortion Threshold (intra) */
+				distortion = 1 + 42 * usbvision->compr_level / 100;
+				buffer[4] = (unsigned char)(distortion & 0xFF);				/* Maximum distortion Threshold (inter) */
+				buffer[5] = (unsigned char)(distortion & 0xFF);				/* Maximum distortion Threshold (intra) */
+			} else { /* BRIDGE_NT1003 */
+				buffer[0] = (unsigned char)(4 + 16 * usbvision->compr_level / 100);	/* PCM threshold 1 */
+				buffer[1] = (unsigned char)(4 + 8 * usbvision->compr_level / 100);	/* PCM threshold 2 */
+				distortion = 2 + 253 * usbvision->compr_level / 100;
+				buffer[2] = (unsigned char)(distortion & 0xFF);				/* distortion threshold bit0-7 */
+				buffer[3] = 0;	/* (unsigned char)((distortion >> 8) & 0x0F);		distortion threshold bit 8-11 */
+				distortion = 0 + 43 * usbvision->compr_level / 100;
+				buffer[4] = (unsigned char)(distortion & 0xFF);				/* maximum distortion bit0-7 */
+				buffer[5] = 0; /* (unsigned char)((distortion >> 8) & 0x01);		maximum distortion bit 8 */
 			}
-			errCode = usbvision_write_reg_irq(usbvision, USBVISION_PCM_THR1, buffer, 6);
-			if (errCode == 0){
+			err_code = usbvision_write_reg_irq(usbvision, USBVISION_PCM_THR1, buffer, 6);
+			if (err_code == 0) {
 				PDEBUG(DBG_IRQ, "new compr params %#02x %#02x %#02x %#02x %#02x %#02x", buffer[0],
 								buffer[1], buffer[2], buffer[3], buffer[4], buffer[5]);
-				usbvision->lastComprLevel = usbvision->comprLevel;
+				usbvision->last_compr_level = usbvision->compr_level;
 			}
 		}
 	}
-	return errCode;
+	return err_code;
 }
 
-static int usbvision_request_intra (struct usb_usbvision *usbvision)
+static int usbvision_request_intra(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 	unsigned char buffer[1];
 
 	PDEBUG(DBG_IRQ, "");
-	usbvision->requestIntra = 1;
+	usbvision->request_intra = 1;
 	buffer[0] = 1;
 	usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1);
-	return errCode;
+	return err_code;
 }
 
-static int usbvision_unrequest_intra (struct usb_usbvision *usbvision)
+static int usbvision_unrequest_intra(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 	unsigned char buffer[1];
 
 	PDEBUG(DBG_IRQ, "");
-	usbvision->requestIntra = 0;
+	usbvision->request_intra = 0;
 	buffer[0] = 0;
 	usbvision_write_reg_irq(usbvision, USBVISION_FORCE_INTRA, buffer, 1);
-	return errCode;
+	return err_code;
 }
 
 /*******************************
@@ -1744,16 +1668,15 @@ static int usbvision_unrequest_intra (struct usb_usbvision *usbvision)
 
 int usbvision_power_off(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_FUNC, "");
 
-	errCode = usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN);
-	if (errCode == 1) {
+	err_code = usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN);
+	if (err_code == 1)
 		usbvision->power = 0;
-	}
-	PDEBUG(DBG_FUNC, "%s: errCode %d", (errCode!=1)?"ERROR":"power is off", errCode);
-	return errCode;
+	PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code != 1) ? "ERROR" : "power is off", err_code);
+	return err_code;
 }
 
 /*
@@ -1769,7 +1692,7 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return 0;
 
-	PDEBUG(DBG_FUNC, "isocMode %#02x", format);
+	PDEBUG(DBG_FUNC, "isoc_mode %#02x", format);
 
 	if ((format != ISOC_MODE_YUV422)
 	    && (format != ISOC_MODE_YUV420)
@@ -1778,8 +1701,8 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma
 		       format);
 		format = ISOC_MODE_YUV420;
 	}
-	value[0] = 0x0A;  //TODO: See the effect of the filter
-	value[1] = format; // Sets the VO_MODE register which follows FILT_CONT
+	value[0] = 0x0A;  /* TODO: See the effect of the filter */
+	value[1] = format; /* Sets the VO_MODE register which follows FILT_CONT */
 	rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
 			     USBVISION_OP_CODE,
 			     USB_DIR_OUT | USB_TYPE_VENDOR |
@@ -1790,7 +1713,7 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma
 		printk(KERN_ERR "%s: ERROR=%d. USBVISION stopped - "
 		       "reconnect or reload driver.\n", proc, rc);
 	}
-	usbvision->isocMode = format;
+	usbvision->isoc_mode = format;
 	return rc;
 }
 
@@ -1802,96 +1725,88 @@ static int usbvision_set_video_format(struct usb_usbvision *usbvision, int forma
 int usbvision_set_output(struct usb_usbvision *usbvision, int width,
 			 int height)
 {
-	int errCode = 0;
-	int UsbWidth, UsbHeight;
-	unsigned int frameRate=0, frameDrop=0;
+	int err_code = 0;
+	int usb_width, usb_height;
+	unsigned int frame_rate = 0, frame_drop = 0;
 	unsigned char value[4];
 
-	if (!USBVISION_IS_OPERATIONAL(usbvision)) {
+	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return 0;
-	}
 
 	if (width > MAX_USB_WIDTH) {
-		UsbWidth = width / 2;
+		usb_width = width / 2;
 		usbvision->stretch_width = 2;
-	}
-	else {
-		UsbWidth = width;
+	} else {
+		usb_width = width;
 		usbvision->stretch_width = 1;
 	}
 
 	if (height > MAX_USB_HEIGHT) {
-		UsbHeight = height / 2;
+		usb_height = height / 2;
 		usbvision->stretch_height = 2;
-	}
-	else {
-		UsbHeight = height;
+	} else {
+		usb_height = height;
 		usbvision->stretch_height = 1;
 	}
 
-	RESTRICT_TO_RANGE(UsbWidth, MIN_FRAME_WIDTH, MAX_USB_WIDTH);
-	UsbWidth &= ~(MIN_FRAME_WIDTH-1);
-	RESTRICT_TO_RANGE(UsbHeight, MIN_FRAME_HEIGHT, MAX_USB_HEIGHT);
-	UsbHeight &= ~(1);
+	RESTRICT_TO_RANGE(usb_width, MIN_FRAME_WIDTH, MAX_USB_WIDTH);
+	usb_width &= ~(MIN_FRAME_WIDTH-1);
+	RESTRICT_TO_RANGE(usb_height, MIN_FRAME_HEIGHT, MAX_USB_HEIGHT);
+	usb_height &= ~(1);
 
 	PDEBUG(DBG_FUNC, "usb %dx%d; screen %dx%d; stretch %dx%d",
-						UsbWidth, UsbHeight, width, height,
+						usb_width, usb_height, width, height,
 						usbvision->stretch_width, usbvision->stretch_height);
 
 	/* I'll not rewrite the same values */
-	if ((UsbWidth != usbvision->curwidth) || (UsbHeight != usbvision->curheight)) {
-		value[0] = UsbWidth & 0xff;		//LSB
-		value[1] = (UsbWidth >> 8) & 0x03;	//MSB
-		value[2] = UsbHeight & 0xff;		//LSB
-		value[3] = (UsbHeight >> 8) & 0x03;	//MSB
+	if ((usb_width != usbvision->curwidth) || (usb_height != usbvision->curheight)) {
+		value[0] = usb_width & 0xff;		/* LSB */
+		value[1] = (usb_width >> 8) & 0x03;	/* MSB */
+		value[2] = usb_height & 0xff;		/* LSB */
+		value[3] = (usb_height >> 8) & 0x03;	/* MSB */
 
-		errCode = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
+		err_code = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
 			     USBVISION_OP_CODE,
 			     USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT,
 				 0, (__u16) USBVISION_LXSIZE_O, value, 4, HZ);
 
-		if (errCode < 0) {
+		if (err_code < 0) {
 			dev_err(&usbvision->dev->dev,
-				"%s failed: error %d\n", __func__, errCode);
-			return errCode;
+				"%s failed: error %d\n", __func__, err_code);
+			return err_code;
 		}
-		usbvision->curwidth = usbvision->stretch_width * UsbWidth;
-		usbvision->curheight = usbvision->stretch_height * UsbHeight;
+		usbvision->curwidth = usbvision->stretch_width * usb_width;
+		usbvision->curheight = usbvision->stretch_height * usb_height;
 	}
 
-	if (usbvision->isocMode == ISOC_MODE_YUV422) {
-		frameRate = (usbvision->isocPacketSize * 1000) / (UsbWidth * UsbHeight * 2);
-	}
-	else if (usbvision->isocMode == ISOC_MODE_YUV420) {
-		frameRate = (usbvision->isocPacketSize * 1000) / ((UsbWidth * UsbHeight * 12) / 8);
-	}
-	else {
-		frameRate = FRAMERATE_MAX;
-	}
+	if (usbvision->isoc_mode == ISOC_MODE_YUV422)
+		frame_rate = (usbvision->isoc_packet_size * 1000) / (usb_width * usb_height * 2);
+	else if (usbvision->isoc_mode == ISOC_MODE_YUV420)
+		frame_rate = (usbvision->isoc_packet_size * 1000) / ((usb_width * usb_height * 12) / 8);
+	else
+		frame_rate = FRAMERATE_MAX;
 
-	if (usbvision->tvnormId & V4L2_STD_625_50) {
-		frameDrop = frameRate * 32 / 25 - 1;
-	}
-	else if (usbvision->tvnormId & V4L2_STD_525_60) {
-		frameDrop = frameRate * 32 / 30 - 1;
-	}
+	if (usbvision->tvnorm_id & V4L2_STD_625_50)
+		frame_drop = frame_rate * 32 / 25 - 1;
+	else if (usbvision->tvnorm_id & V4L2_STD_525_60)
+		frame_drop = frame_rate * 32 / 30 - 1;
 
-	RESTRICT_TO_RANGE(frameDrop, FRAMERATE_MIN, FRAMERATE_MAX);
+	RESTRICT_TO_RANGE(frame_drop, FRAMERATE_MIN, FRAMERATE_MAX);
 
-	PDEBUG(DBG_FUNC, "frameRate %d fps, frameDrop %d", frameRate, frameDrop);
+	PDEBUG(DBG_FUNC, "frame_rate %d fps, frame_drop %d", frame_rate, frame_drop);
 
-	frameDrop = FRAMERATE_MAX; 	// We can allow the maximum here, because dropping is controlled
+	frame_drop = FRAMERATE_MAX;	/* We can allow the maximum here, because dropping is controlled */
 
-	/* frameDrop = 7; => framePhase = 1, 5, 9, 13, 17, 21, 25, 0, 4, 8, ...
-		=> frameSkip = 4;
-		=> frameRate = (7 + 1) * 25 / 32 = 200 / 32 = 6.25;
+	/* frame_drop = 7; => frame_phase = 1, 5, 9, 13, 17, 21, 25, 0, 4, 8, ...
+		=> frame_skip = 4;
+		=> frame_rate = (7 + 1) * 25 / 32 = 200 / 32 = 6.25;
 
-	   frameDrop = 9; => framePhase = 1, 5, 8, 11, 14, 17, 21, 24, 27, 1, 4, 8, ...
-	    => frameSkip = 4, 3, 3, 3, 3, 4, 3, 3, 3, 3, 4, ...
-		=> frameRate = (9 + 1) * 25 / 32 = 250 / 32 = 7.8125;
+	   frame_drop = 9; => frame_phase = 1, 5, 8, 11, 14, 17, 21, 24, 27, 1, 4, 8, ...
+	    => frame_skip = 4, 3, 3, 3, 3, 4, 3, 3, 3, 3, 4, ...
+		=> frame_rate = (9 + 1) * 25 / 32 = 250 / 32 = 7.8125;
 	*/
-	errCode = usbvision_write_reg(usbvision, USBVISION_FRM_RATE, frameDrop);
-	return errCode;
+	err_code = usbvision_write_reg(usbvision, USBVISION_FRM_RATE, frame_drop);
+	return err_code;
 }
 
 
@@ -1903,8 +1818,8 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 {
 	int i;
 
-	/*needs to be page aligned cause the buffers can be mapped individually! */
-	usbvision->max_frame_size =  PAGE_ALIGN(usbvision->curwidth *
+	/* needs to be page aligned cause the buffers can be mapped individually! */
+	usbvision->max_frame_size = PAGE_ALIGN(usbvision->curwidth *
 						usbvision->curheight *
 						usbvision->palette.bytes_per_pixel);
 
@@ -1912,9 +1827,9 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 	usbvision->num_frames = number_of_frames;
 	while (usbvision->num_frames > 0) {
 		usbvision->fbuf_size = usbvision->num_frames * usbvision->max_frame_size;
-		if((usbvision->fbuf = usbvision_rvmalloc(usbvision->fbuf_size))) {
+		usbvision->fbuf = usbvision_rvmalloc(usbvision->fbuf_size);
+		if (usbvision->fbuf)
 			break;
-		}
 		usbvision->num_frames--;
 	}
 
@@ -1925,7 +1840,7 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 	/* Allocate all buffers */
 	for (i = 0; i < usbvision->num_frames; i++) {
 		usbvision->frame[i].index = i;
-		usbvision->frame[i].grabstate = FrameState_Unused;
+		usbvision->frame[i].grabstate = frame_state_unused;
 		usbvision->frame[i].data = usbvision->fbuf +
 			i * usbvision->max_frame_size;
 		/*
@@ -1937,7 +1852,8 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 		usbvision->frame[i].height = usbvision->curheight;
 		usbvision->frame[i].bytes_read = 0;
 	}
-	PDEBUG(DBG_FUNC, "allocated %d frames (%d bytes per frame)",usbvision->num_frames,usbvision->max_frame_size);
+	PDEBUG(DBG_FUNC, "allocated %d frames (%d bytes per frame)",
+			usbvision->num_frames, usbvision->max_frame_size);
 	return usbvision->num_frames;
 }
 
@@ -1948,7 +1864,7 @@ int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames
 void usbvision_frames_free(struct usb_usbvision *usbvision)
 {
 	/* Have to free all that memory */
-	PDEBUG(DBG_FUNC, "free %d frames",usbvision->num_frames);
+	PDEBUG(DBG_FUNC, "free %d frames", usbvision->num_frames);
 
 	if (usbvision->fbuf != NULL) {
 		usbvision_rvfree(usbvision->fbuf, usbvision->fbuf_size);
@@ -1969,7 +1885,7 @@ void usbvision_empty_framequeues(struct usb_usbvision *usbvision)
 	INIT_LIST_HEAD(&(usbvision->outqueue));
 
 	for (i = 0; i < USBVISION_NUMFRAMES; i++) {
-		usbvision->frame[i].grabstate = FrameState_Unused;
+		usbvision->frame[i].grabstate = frame_state_unused;
 		usbvision->frame[i].bytes_read = 0;
 	}
 }
@@ -1984,9 +1900,9 @@ int usbvision_stream_interrupt(struct usb_usbvision *usbvision)
 
 	/* stop reading from the device */
 
-	usbvision->streaming = Stream_Interrupt;
+	usbvision->streaming = stream_interrupt;
 	ret = wait_event_timeout(usbvision->wait_stream,
-				 (usbvision->streaming == Stream_Idle),
+				 (usbvision->streaming == stream_idle),
 				 msecs_to_jiffies(USBVISION_NUMSBUF*USBVISION_URB_FRAMES));
 	return ret;
 }
@@ -2002,19 +1918,19 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
 	int rc;
 	unsigned char value[6];
 
-	value[0] = 0x0F;    // Intra-Compression cycle
-	value[1] = 0x01;    // Reg.45 one line per strip
-	value[2] = 0x00;    // Reg.46 Force intra mode on all new frames
-	value[3] = 0x00;    // Reg.47 FORCE_UP <- 0 normal operation (not force)
-	value[4] = 0xA2;    // Reg.48 BUF_THR I'm not sure if this does something in not compressed mode.
-	value[5] = 0x00;    // Reg.49 DVI_YUV This has nothing to do with compression
-
-	//catched values for NT1004
-	// value[0] = 0xFF; // Never apply intra mode automatically
-	// value[1] = 0xF1; // Use full frame height for virtual strip width; One line per strip
-	// value[2] = 0x01; // Force intra mode on all new frames
-	// value[3] = 0x00; // Strip size 400 Bytes; do not force up
-	// value[4] = 0xA2; //
+	value[0] = 0x0F;    /* Intra-Compression cycle */
+	value[1] = 0x01;    /* Reg.45 one line per strip */
+	value[2] = 0x00;    /* Reg.46 Force intra mode on all new frames */
+	value[3] = 0x00;    /* Reg.47 FORCE_UP <- 0 normal operation (not force) */
+	value[4] = 0xA2;    /* Reg.48 BUF_THR I'm not sure if this does something in not compressed mode. */
+	value[5] = 0x00;    /* Reg.49 DVI_YUV This has nothing to do with compression */
+
+	/* catched values for NT1004 */
+	/* value[0] = 0xFF; Never apply intra mode automatically */
+	/* value[1] = 0xF1; Use full frame height for virtual strip width; One line per strip */
+	/* value[2] = 0x01; Force intra mode on all new frames */
+	/* value[3] = 0x00; Strip size 400 Bytes; do not force up */
+	/* value[4] = 0xA2; */
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return 0;
 
@@ -2030,21 +1946,20 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
 		return rc;
 	}
 
-	if (usbvision->bridgeType == BRIDGE_NT1004) {
-		value[0] =  20; // PCM Threshold 1
-		value[1] =  12; // PCM Threshold 2
-		value[2] = 255; // Distorsion Threshold inter
-		value[3] = 255; // Distorsion Threshold intra
-		value[4] =  43; // Max Distorsion inter
-		value[5] =  43; // Max Distorsion intra
-	}
-	else {
-		value[0] =  20; // PCM Threshold 1
-		value[1] =  12; // PCM Threshold 2
-		value[2] = 255; // Distorsion Threshold d7-d0
-		value[3] =   0; // Distorsion Threshold d11-d8
-		value[4] =  43; // Max Distorsion d7-d0
-		value[5] =   0; // Max Distorsion d8
+	if (usbvision->bridge_type == BRIDGE_NT1004) {
+		value[0] =  20; /* PCM Threshold 1 */
+		value[1] =  12; /* PCM Threshold 2 */
+		value[2] = 255; /* Distortion Threshold inter */
+		value[3] = 255; /* Distortion Threshold intra */
+		value[4] =  43; /* Max Distortion inter */
+		value[5] =  43; /* Max Distortion intra */
+	} else {
+		value[0] =  20; /* PCM Threshold 1 */
+		value[1] =  12; /* PCM Threshold 2 */
+		value[2] = 255; /* Distortion Threshold d7-d0 */
+		value[3] =   0; /* Distortion Threshold d11-d8 */
+		value[4] =  43; /* Max Distortion d7-d0 */
+		value[5] =   0; /* Max Distortion d8 */
 	}
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
@@ -2059,10 +1974,7 @@ static int usbvision_set_compress_params(struct usb_usbvision *usbvision)
 	if (rc < 0) {
 		printk(KERN_ERR "%sERROR=%d. USBVISION stopped - "
 		       "reconnect or reload driver.\n", proc, rc);
-		return rc;
 	}
-
-
 	return rc;
 }
 
@@ -2085,9 +1997,9 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 		return 0;
 
 	/* Set input format expected from decoder*/
-	if (usbvision_device_data[usbvision->DevModel].Vin_Reg1_override) {
-		value[0] = usbvision_device_data[usbvision->DevModel].Vin_Reg1;
-	} else if(usbvision_device_data[usbvision->DevModel].Codec == CODEC_SAA7113) {
+	if (usbvision_device_data[usbvision->dev_model].vin_reg1_override) {
+		value[0] = usbvision_device_data[usbvision->dev_model].vin_reg1;
+	} else if (usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) {
 		/* SAA7113 uses 8 bit output */
 		value[0] = USBVISION_8_422_SYNC;
 	} else {
@@ -2105,53 +2017,53 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 	}
 
 
-	if (usbvision->tvnormId & V4L2_STD_PAL) {
+	if (usbvision->tvnorm_id & V4L2_STD_PAL) {
 		value[0] = 0xC0;
-		value[1] = 0x02;	//0x02C0 -> 704 Input video line length
+		value[1] = 0x02;	/* 0x02C0 -> 704 Input video line length */
 		value[2] = 0x20;
-		value[3] = 0x01;	//0x0120 -> 288 Input video n. of lines
+		value[3] = 0x01;	/* 0x0120 -> 288 Input video n. of lines */
 		value[4] = 0x60;
-		value[5] = 0x00;	//0x0060 -> 96 Input video h offset
+		value[5] = 0x00;	/* 0x0060 -> 96 Input video h offset */
 		value[6] = 0x16;
-		value[7] = 0x00;	//0x0016 -> 22 Input video v offset
-	} else if (usbvision->tvnormId & V4L2_STD_SECAM) {
+		value[7] = 0x00;	/* 0x0016 -> 22 Input video v offset */
+	} else if (usbvision->tvnorm_id & V4L2_STD_SECAM) {
 		value[0] = 0xC0;
-		value[1] = 0x02;	//0x02C0 -> 704 Input video line length
+		value[1] = 0x02;	/* 0x02C0 -> 704 Input video line length */
 		value[2] = 0x20;
-		value[3] = 0x01;	//0x0120 -> 288 Input video n. of lines
+		value[3] = 0x01;	/* 0x0120 -> 288 Input video n. of lines */
 		value[4] = 0x01;
-		value[5] = 0x00;	//0x0001 -> 01 Input video h offset
+		value[5] = 0x00;	/* 0x0001 -> 01 Input video h offset */
 		value[6] = 0x01;
-		value[7] = 0x00;	//0x0001 -> 01 Input video v offset
+		value[7] = 0x00;	/* 0x0001 -> 01 Input video v offset */
 	} else {	/* V4L2_STD_NTSC */
 		value[0] = 0xD0;
-		value[1] = 0x02;	//0x02D0 -> 720 Input video line length
+		value[1] = 0x02;	/* 0x02D0 -> 720 Input video line length */
 		value[2] = 0xF0;
-		value[3] = 0x00;	//0x00F0 -> 240 Input video number of lines
+		value[3] = 0x00;	/* 0x00F0 -> 240 Input video number of lines */
 		value[4] = 0x50;
-		value[5] = 0x00;	//0x0050 -> 80 Input video h offset
+		value[5] = 0x00;	/* 0x0050 -> 80 Input video h offset */
 		value[6] = 0x10;
-		value[7] = 0x00;	//0x0010 -> 16 Input video v offset
+		value[7] = 0x00;	/* 0x0010 -> 16 Input video v offset */
 	}
 
-	if (usbvision_device_data[usbvision->DevModel].X_Offset >= 0) {
-		value[4]=usbvision_device_data[usbvision->DevModel].X_Offset & 0xff;
-		value[5]=(usbvision_device_data[usbvision->DevModel].X_Offset & 0x0300) >> 8;
+	if (usbvision_device_data[usbvision->dev_model].x_offset >= 0) {
+		value[4] = usbvision_device_data[usbvision->dev_model].x_offset & 0xff;
+		value[5] = (usbvision_device_data[usbvision->dev_model].x_offset & 0x0300) >> 8;
 	}
 
-	if (adjust_X_Offset != -1) {
-		value[4] = adjust_X_Offset & 0xff;
-		value[5] = (adjust_X_Offset & 0x0300) >> 8;
+	if (adjust_x_offset != -1) {
+		value[4] = adjust_x_offset & 0xff;
+		value[5] = (adjust_x_offset & 0x0300) >> 8;
 	}
 
-	if (usbvision_device_data[usbvision->DevModel].Y_Offset >= 0) {
-		value[6]=usbvision_device_data[usbvision->DevModel].Y_Offset & 0xff;
-		value[7]=(usbvision_device_data[usbvision->DevModel].Y_Offset & 0x0300) >> 8;
+	if (usbvision_device_data[usbvision->dev_model].y_offset >= 0) {
+		value[6] = usbvision_device_data[usbvision->dev_model].y_offset & 0xff;
+		value[7] = (usbvision_device_data[usbvision->dev_model].y_offset & 0x0300) >> 8;
 	}
 
-	if (adjust_Y_Offset != -1) {
-		value[6] = adjust_Y_Offset & 0xff;
-		value[7] = (adjust_Y_Offset & 0x0300) >> 8;
+	if (adjust_y_offset != -1) {
+		value[6] = adjust_y_offset & 0xff;
+		value[7] = (adjust_y_offset & 0x0300) >> 8;
 	}
 
 	rc = usb_control_msg(usbvision->dev, usb_sndctrlpipe(usbvision->dev, 1),
@@ -2167,15 +2079,14 @@ int usbvision_set_input(struct usb_usbvision *usbvision)
 
 	dvi_yuv_value = 0x00;	/* U comes after V, Ya comes after U/V, Yb comes after Yb */
 
-	if(usbvision_device_data[usbvision->DevModel].Dvi_yuv_override){
-		dvi_yuv_value = usbvision_device_data[usbvision->DevModel].Dvi_yuv;
-	}
-	else if(usbvision_device_data[usbvision->DevModel].Codec == CODEC_SAA7113) {
-	/* This changes as the fine sync control changes. Further investigation necessary */
+	if (usbvision_device_data[usbvision->dev_model].dvi_yuv_override) {
+		dvi_yuv_value = usbvision_device_data[usbvision->dev_model].dvi_yuv;
+	} else if (usbvision_device_data[usbvision->dev_model].codec == CODEC_SAA7113) {
+		/* This changes as the fine sync control changes. Further investigation necessary */
 		dvi_yuv_value = 0x06;
 	}
 
-	return (usbvision_write_reg(usbvision, USBVISION_DVI_YUV, dvi_yuv_value));
+	return usbvision_write_reg(usbvision, USBVISION_DVI_YUV, dvi_yuv_value);
 }
 
 
@@ -2192,7 +2103,7 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 	int rc;
 	unsigned char value[8];
 
-	if (usbvision->isocMode == ISOC_MODE_COMPRESS) {
+	if (usbvision->isoc_mode == ISOC_MODE_COMPRESS) {
 		value[0] = 0x42;
 		value[1] = 0x71;
 		value[2] = 0xff;
@@ -2201,11 +2112,10 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 		value[5] = 0xe0;
 		value[6] = 0x71;
 		value[7] = 0xff;
-		// UR:  0x0E200-0x3FFFF = 204288 Words (1 Word = 2 Byte)
-		// FDL: 0x00000-0x0E099 =  57498 Words
-		// VDW: 0x0E3FF-0x3FFFF
-	}
-	else {
+		/* UR:  0x0E200-0x3FFFF = 204288 Words (1 Word = 2 Byte) */
+		/* FDL: 0x00000-0x0E099 =  57498 Words */
+		/* VDW: 0x0E3FF-0x3FFFF */
+	} else {
 		value[0] = 0x42;
 		value[1] = 0x00;
 		value[2] = 0xff;
@@ -2218,14 +2128,14 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 	/* These are the values of the address of the video buffer,
 	 * they have to be loaded into the USBVISION_DRM_PRM1-8
 	 *
-	 * Start address of video output buffer for read: 	drm_prm1-2 -> 0x00000
-	 * End address of video output buffer for read: 	drm_prm1-3 -> 0x1ffff
-	 * Start address of video frame delay buffer: 		drm_prm1-4 -> 0x20000
+	 * Start address of video output buffer for read:	drm_prm1-2 -> 0x00000
+	 * End address of video output buffer for read:		drm_prm1-3 -> 0x1ffff
+	 * Start address of video frame delay buffer:		drm_prm1-4 -> 0x20000
 	 *    Only used in compressed mode
-	 * End address of video frame delay buffer: 		drm_prm1-5-6 -> 0x3ffff
+	 * End address of video frame delay buffer:		drm_prm1-5-6 -> 0x3ffff
 	 *    Only used in compressed mode
-	 * Start address of video output buffer for write: 	drm_prm1-7 -> 0x00000
-	 * End address of video output buffer for write: 	drm_prm1-8 -> 0x1ffff
+	 * Start address of video output buffer for write:	drm_prm1-7 -> 0x00000
+	 * End address of video output buffer for write:	drm_prm1-8 -> 0x1ffff
 	 */
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
@@ -2243,8 +2153,9 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 	}
 
 	/* Restart the video buffer logic */
-	if ((rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, USBVISION_RES_UR |
-				   USBVISION_RES_FDL | USBVISION_RES_VDW)) < 0)
+	rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, USBVISION_RES_UR |
+				   USBVISION_RES_FDL | USBVISION_RES_VDW);
+	if (rc < 0)
 		return rc;
 	rc = usbvision_write_reg(usbvision, USBVISION_DRM_CONT, 0x00);
 
@@ -2261,23 +2172,22 @@ static int usbvision_set_dram_settings(struct usb_usbvision *usbvision)
 
 int usbvision_power_on(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_FUNC, "");
 
 	usbvision_write_reg(usbvision, USBVISION_PWR_REG, USBVISION_SSPND_EN);
 	usbvision_write_reg(usbvision, USBVISION_PWR_REG,
-			 USBVISION_SSPND_EN | USBVISION_RES2);
+			USBVISION_SSPND_EN | USBVISION_RES2);
 
 	usbvision_write_reg(usbvision, USBVISION_PWR_REG,
-			 USBVISION_SSPND_EN | USBVISION_PWR_VID);
-	errCode = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
-						USBVISION_SSPND_EN | USBVISION_PWR_VID | USBVISION_RES2);
-	if (errCode == 1) {
+			USBVISION_SSPND_EN | USBVISION_PWR_VID);
+	err_code = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+			USBVISION_SSPND_EN | USBVISION_PWR_VID | USBVISION_RES2);
+	if (err_code == 1)
 		usbvision->power = 1;
-	}
-	PDEBUG(DBG_FUNC, "%s: errCode %d", (errCode<0)?"ERROR":"power is on", errCode);
-	return errCode;
+	PDEBUG(DBG_FUNC, "%s: err_code %d", (err_code < 0) ? "ERROR" : "power is on", err_code);
+	return err_code;
 }
 
 
@@ -2285,53 +2195,50 @@ int usbvision_power_on(struct usb_usbvision *usbvision)
  * usbvision timer stuff
  */
 
-// to call usbvision_power_off from task queue
+/* to call usbvision_power_off from task queue */
 static void call_usbvision_power_off(struct work_struct *work)
 {
-	struct usb_usbvision *usbvision = container_of(work, struct usb_usbvision, powerOffWork);
+	struct usb_usbvision *usbvision = container_of(work, struct usb_usbvision, power_off_work);
 
 	PDEBUG(DBG_FUNC, "");
-	if(mutex_lock_interruptible(&usbvision->lock)) {
+	if (mutex_lock_interruptible(&usbvision->v4l2_lock))
 		return;
-	}
 
-
-	if(usbvision->user == 0) {
+	if (usbvision->user == 0) {
 		usbvision_i2c_unregister(usbvision);
 
 		usbvision_power_off(usbvision);
 		usbvision->initialized = 0;
 	}
-	mutex_unlock(&usbvision->lock);
+	mutex_unlock(&usbvision->v4l2_lock);
 }
 
-static void usbvision_powerOffTimer(unsigned long data)
+static void usbvision_power_off_timer(unsigned long data)
 {
-	struct usb_usbvision *usbvision = (void *) data;
+	struct usb_usbvision *usbvision = (void *)data;
 
 	PDEBUG(DBG_FUNC, "");
-	del_timer(&usbvision->powerOffTimer);
-	INIT_WORK(&usbvision->powerOffWork, call_usbvision_power_off);
-	(void) schedule_work(&usbvision->powerOffWork);
+	del_timer(&usbvision->power_off_timer);
+	INIT_WORK(&usbvision->power_off_work, call_usbvision_power_off);
+	(void) schedule_work(&usbvision->power_off_work);
 }
 
-void usbvision_init_powerOffTimer(struct usb_usbvision *usbvision)
+void usbvision_init_power_off_timer(struct usb_usbvision *usbvision)
 {
-	init_timer(&usbvision->powerOffTimer);
-	usbvision->powerOffTimer.data = (long) usbvision;
-	usbvision->powerOffTimer.function = usbvision_powerOffTimer;
+	init_timer(&usbvision->power_off_timer);
+	usbvision->power_off_timer.data = (long)usbvision;
+	usbvision->power_off_timer.function = usbvision_power_off_timer;
 }
 
-void usbvision_set_powerOffTimer(struct usb_usbvision *usbvision)
+void usbvision_set_power_off_timer(struct usb_usbvision *usbvision)
 {
-	mod_timer(&usbvision->powerOffTimer, jiffies + USBVISION_POWEROFF_TIME);
+	mod_timer(&usbvision->power_off_timer, jiffies + USBVISION_POWEROFF_TIME);
 }
 
-void usbvision_reset_powerOffTimer(struct usb_usbvision *usbvision)
+void usbvision_reset_power_off_timer(struct usb_usbvision *usbvision)
 {
-	if (timer_pending(&usbvision->powerOffTimer)) {
-		del_timer(&usbvision->powerOffTimer);
-	}
+	if (timer_pending(&usbvision->power_off_timer))
+		del_timer(&usbvision->power_off_timer);
 }
 
 /*
@@ -2341,14 +2248,10 @@ void usbvision_reset_powerOffTimer(struct usb_usbvision *usbvision)
  */
 int usbvision_begin_streaming(struct usb_usbvision *usbvision)
 {
-	int errCode = 0;
-
-	if (usbvision->isocMode == ISOC_MODE_COMPRESS) {
+	if (usbvision->isoc_mode == ISOC_MODE_COMPRESS)
 		usbvision_init_compression(usbvision);
-	}
-	errCode = usbvision_write_reg(usbvision, USBVISION_VIN_REG2, USBVISION_NOHVALID |
-										usbvision->Vin_Reg2_Preset);
-	return errCode;
+	return usbvision_write_reg(usbvision, USBVISION_VIN_REG2,
+		USBVISION_NOHVALID | usbvision->vin_reg2_preset);
 }
 
 /*
@@ -2360,25 +2263,24 @@ int usbvision_restart_isoc(struct usb_usbvision *usbvision)
 {
 	int ret;
 
-	if (
-	    (ret =
-	     usbvision_write_reg(usbvision, USBVISION_PWR_REG,
-			      USBVISION_SSPND_EN | USBVISION_PWR_VID)) < 0)
+	ret = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+			      USBVISION_SSPND_EN | USBVISION_PWR_VID);
+	if (ret < 0)
 		return ret;
-	if (
-	    (ret =
-	     usbvision_write_reg(usbvision, USBVISION_PWR_REG,
+	ret = usbvision_write_reg(usbvision, USBVISION_PWR_REG,
 			      USBVISION_SSPND_EN | USBVISION_PWR_VID |
-			      USBVISION_RES2)) < 0)
+			      USBVISION_RES2);
+	if (ret < 0)
 		return ret;
-	if (
-	    (ret =
-	     usbvision_write_reg(usbvision, USBVISION_VIN_REG2,
+	ret = usbvision_write_reg(usbvision, USBVISION_VIN_REG2,
 			      USBVISION_KEEP_BLANK | USBVISION_NOHVALID |
-				  usbvision->Vin_Reg2_Preset)) < 0) return ret;
+				  usbvision->vin_reg2_preset);
+	if (ret < 0)
+		return ret;
 
 	/* TODO: schedule timeout */
-	while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) & 0x01) != 1);
+	while ((usbvision_read_reg(usbvision, USBVISION_STATUS_REG) & 0x01) != 1)
+		;
 
 	return 0;
 }
@@ -2386,27 +2288,27 @@ int usbvision_restart_isoc(struct usb_usbvision *usbvision)
 int usbvision_audio_off(struct usb_usbvision *usbvision)
 {
 	if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, USBVISION_AUDIO_MUTE) < 0) {
-		printk(KERN_ERR "usbvision_audio_off: can't wirte reg\n");
+		printk(KERN_ERR "usbvision_audio_off: can't write reg\n");
 		return -1;
 	}
-	usbvision->AudioMute = 0;
-	usbvision->AudioChannel = USBVISION_AUDIO_MUTE;
+	usbvision->audio_mute = 0;
+	usbvision->audio_channel = USBVISION_AUDIO_MUTE;
 	return 0;
 }
 
-int usbvision_set_audio(struct usb_usbvision *usbvision, int AudioChannel)
+int usbvision_set_audio(struct usb_usbvision *usbvision, int audio_channel)
 {
-	if (!usbvision->AudioMute) {
-		if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, AudioChannel) < 0) {
+	if (!usbvision->audio_mute) {
+		if (usbvision_write_reg(usbvision, USBVISION_IOPIN_REG, audio_channel) < 0) {
 			printk(KERN_ERR "usbvision_set_audio: can't write iopin register for audio switching\n");
 			return -1;
 		}
 	}
-	usbvision->AudioChannel = AudioChannel;
+	usbvision->audio_channel = audio_channel;
 	return 0;
 }
 
-int usbvision_setup(struct usb_usbvision *usbvision,int format)
+int usbvision_setup(struct usb_usbvision *usbvision, int format)
 {
 	usbvision_set_video_format(usbvision, format);
 	usbvision_set_dram_settings(usbvision);
@@ -2421,27 +2323,28 @@ int usbvision_setup(struct usb_usbvision *usbvision,int format)
 
 int usbvision_set_alternate(struct usb_usbvision *dev)
 {
-	int errCode, prev_alt = dev->ifaceAlt;
+	int err_code, prev_alt = dev->iface_alt;
 	int i;
 
-	dev->ifaceAlt=0;
-	for(i=0;i< dev->num_alt; i++)
-		if(dev->alt_max_pkt_size[i]>dev->alt_max_pkt_size[dev->ifaceAlt])
-			dev->ifaceAlt=i;
-
-	if (dev->ifaceAlt != prev_alt) {
-		dev->isocPacketSize = dev->alt_max_pkt_size[dev->ifaceAlt];
-		PDEBUG(DBG_FUNC,"setting alternate %d with wMaxPacketSize=%u", dev->ifaceAlt,dev->isocPacketSize);
-		errCode = usb_set_interface(dev->dev, dev->iface, dev->ifaceAlt);
-		if (errCode < 0) {
+	dev->iface_alt = 0;
+	for (i = 0; i < dev->num_alt; i++)
+		if (dev->alt_max_pkt_size[i] > dev->alt_max_pkt_size[dev->iface_alt])
+			dev->iface_alt = i;
+
+	if (dev->iface_alt != prev_alt) {
+		dev->isoc_packet_size = dev->alt_max_pkt_size[dev->iface_alt];
+		PDEBUG(DBG_FUNC, "setting alternate %d with max_packet_size=%u",
+				dev->iface_alt, dev->isoc_packet_size);
+		err_code = usb_set_interface(dev->dev, dev->iface, dev->iface_alt);
+		if (err_code < 0) {
 			dev_err(&dev->dev->dev,
 				"cannot change alternate number to %d (error=%i)\n",
-					dev->ifaceAlt, errCode);
-			return errCode;
+					dev->iface_alt, err_code);
+			return err_code;
 		}
 	}
 
-	PDEBUG(DBG_ISOC, "ISO Packet Length:%d", dev->isocPacketSize);
+	PDEBUG(DBG_ISOC, "ISO Packet Length:%d", dev->isoc_packet_size);
 
 	return 0;
 }
@@ -2453,27 +2356,27 @@ int usbvision_set_alternate(struct usb_usbvision *dev)
 int usbvision_init_isoc(struct usb_usbvision *usbvision)
 {
 	struct usb_device *dev = usbvision->dev;
-	int bufIdx, errCode, regValue;
+	int buf_idx, err_code, reg_value;
 	int sb_size;
 
 	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return -EFAULT;
 
-	usbvision->curFrame = NULL;
+	usbvision->cur_frame = NULL;
 	scratch_reset(usbvision);
 
 	/* Alternate interface 1 is is the biggest frame size */
-	errCode = usbvision_set_alternate(usbvision);
-	if (errCode < 0) {
-		usbvision->last_error = errCode;
+	err_code = usbvision_set_alternate(usbvision);
+	if (err_code < 0) {
+		usbvision->last_error = err_code;
 		return -EBUSY;
 	}
-	sb_size = USBVISION_URB_FRAMES * usbvision->isocPacketSize;
+	sb_size = USBVISION_URB_FRAMES * usbvision->isoc_packet_size;
 
-	regValue = (16 - usbvision_read_reg(usbvision,
+	reg_value = (16 - usbvision_read_reg(usbvision,
 					    USBVISION_ALTER_REG)) & 0x0F;
 
-	usbvision->usb_bandwidth = regValue >> 1;
+	usbvision->usb_bandwidth = reg_value >> 1;
 	PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec",
 	       usbvision->usb_bandwidth);
 
@@ -2481,7 +2384,7 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
 
 	/* We double buffer the Iso lists */
 
-	for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
+	for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) {
 		int j, k;
 		struct urb *urb;
 
@@ -2491,8 +2394,8 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
 				"%s: usb_alloc_urb() failed\n", __func__);
 			return -ENOMEM;
 		}
-		usbvision->sbuf[bufIdx].urb = urb;
-		usbvision->sbuf[bufIdx].data =
+		usbvision->sbuf[buf_idx].urb = urb;
+		usbvision->sbuf[buf_idx].data =
 			usb_alloc_coherent(usbvision->dev,
 					   sb_size,
 					   GFP_KERNEL,
@@ -2502,31 +2405,31 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
 		urb->pipe = usb_rcvisocpipe(dev, usbvision->video_endp);
 		urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
 		urb->interval = 1;
-		urb->transfer_buffer = usbvision->sbuf[bufIdx].data;
-		urb->complete = usbvision_isocIrq;
+		urb->transfer_buffer = usbvision->sbuf[buf_idx].data;
+		urb->complete = usbvision_isoc_irq;
 		urb->number_of_packets = USBVISION_URB_FRAMES;
 		urb->transfer_buffer_length =
-		    usbvision->isocPacketSize * USBVISION_URB_FRAMES;
+		    usbvision->isoc_packet_size * USBVISION_URB_FRAMES;
 		for (j = k = 0; j < USBVISION_URB_FRAMES; j++,
-		     k += usbvision->isocPacketSize) {
+		     k += usbvision->isoc_packet_size) {
 			urb->iso_frame_desc[j].offset = k;
 			urb->iso_frame_desc[j].length =
-				usbvision->isocPacketSize;
+				usbvision->isoc_packet_size;
 		}
 	}
 
 	/* Submit all URBs */
-	for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
-			errCode = usb_submit_urb(usbvision->sbuf[bufIdx].urb,
+	for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) {
+			err_code = usb_submit_urb(usbvision->sbuf[buf_idx].urb,
 						 GFP_KERNEL);
-		if (errCode) {
+		if (err_code) {
 			dev_err(&usbvision->dev->dev,
 				"%s: usb_submit_urb(%d) failed: error %d\n",
-					__func__, bufIdx, errCode);
+					__func__, buf_idx, err_code);
 		}
 	}
 
-	usbvision->streaming = Stream_Idle;
+	usbvision->streaming = stream_idle;
 	PDEBUG(DBG_ISOC, "%s: streaming=1 usbvision->video_endp=$%02x",
 	       __func__,
 	       usbvision->video_endp);
@@ -2542,47 +2445,46 @@ int usbvision_init_isoc(struct usb_usbvision *usbvision)
  */
 void usbvision_stop_isoc(struct usb_usbvision *usbvision)
 {
-	int bufIdx, errCode, regValue;
-	int sb_size = USBVISION_URB_FRAMES * usbvision->isocPacketSize;
+	int buf_idx, err_code, reg_value;
+	int sb_size = USBVISION_URB_FRAMES * usbvision->isoc_packet_size;
 
-	if ((usbvision->streaming == Stream_Off) || (usbvision->dev == NULL))
+	if ((usbvision->streaming == stream_off) || (usbvision->dev == NULL))
 		return;
 
 	/* Unschedule all of the iso td's */
-	for (bufIdx = 0; bufIdx < USBVISION_NUMSBUF; bufIdx++) {
-		usb_kill_urb(usbvision->sbuf[bufIdx].urb);
-		if (usbvision->sbuf[bufIdx].data){
+	for (buf_idx = 0; buf_idx < USBVISION_NUMSBUF; buf_idx++) {
+		usb_kill_urb(usbvision->sbuf[buf_idx].urb);
+		if (usbvision->sbuf[buf_idx].data) {
 			usb_free_coherent(usbvision->dev,
 					  sb_size,
-					  usbvision->sbuf[bufIdx].data,
-					  usbvision->sbuf[bufIdx].urb->transfer_dma);
+					  usbvision->sbuf[buf_idx].data,
+					  usbvision->sbuf[buf_idx].urb->transfer_dma);
 		}
-		usb_free_urb(usbvision->sbuf[bufIdx].urb);
-		usbvision->sbuf[bufIdx].urb = NULL;
+		usb_free_urb(usbvision->sbuf[buf_idx].urb);
+		usbvision->sbuf[buf_idx].urb = NULL;
 	}
 
-	PDEBUG(DBG_ISOC, "%s: streaming=Stream_Off\n", __func__);
-	usbvision->streaming = Stream_Off;
+	PDEBUG(DBG_ISOC, "%s: streaming=stream_off\n", __func__);
+	usbvision->streaming = stream_off;
 
 	if (!usbvision->remove_pending) {
-
 		/* Set packet size to 0 */
-		usbvision->ifaceAlt=0;
-		errCode = usb_set_interface(usbvision->dev, usbvision->iface,
-					    usbvision->ifaceAlt);
-		if (errCode < 0) {
+		usbvision->iface_alt = 0;
+		err_code = usb_set_interface(usbvision->dev, usbvision->iface,
+					    usbvision->iface_alt);
+		if (err_code < 0) {
 			dev_err(&usbvision->dev->dev,
 				"%s: usb_set_interface() failed: error %d\n",
-					__func__, errCode);
-			usbvision->last_error = errCode;
+					__func__, err_code);
+			usbvision->last_error = err_code;
 		}
-		regValue = (16-usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F;
-		usbvision->isocPacketSize =
-			(regValue == 0) ? 0 : (regValue * 64) - 1;
+		reg_value = (16-usbvision_read_reg(usbvision, USBVISION_ALTER_REG)) & 0x0F;
+		usbvision->isoc_packet_size =
+			(reg_value == 0) ? 0 : (reg_value * 64) - 1;
 		PDEBUG(DBG_ISOC, "ISO Packet Length:%d",
-		       usbvision->isocPacketSize);
+		       usbvision->isoc_packet_size);
 
-		usbvision->usb_bandwidth = regValue >> 1;
+		usbvision->usb_bandwidth = reg_value >> 1;
 		PDEBUG(DBG_ISOC, "USB Bandwidth Usage: %dMbit/Sec",
 		       usbvision->usb_bandwidth);
 	}
@@ -2592,39 +2494,38 @@ int usbvision_muxsel(struct usb_usbvision *usbvision, int channel)
 {
 	/* inputs #0 and #3 are constant for every SAA711x. */
 	/* inputs #1 and #2 are variable for SAA7111 and SAA7113 */
-	int mode[4]= {SAA7115_COMPOSITE0, 0, 0, SAA7115_COMPOSITE3};
-	int audio[]= {1, 0, 0, 0};
-	//channel 0 is TV with audiochannel 1 (tuner mono)
-	//channel 1 is Composite with audio channel 0 (line in)
-	//channel 2 is S-Video with audio channel 0 (line in)
-	//channel 3 is additional video inputs to the device with audio channel 0 (line in)
+	int mode[4] = { SAA7115_COMPOSITE0, 0, 0, SAA7115_COMPOSITE3 };
+	int audio[] = { 1, 0, 0, 0 };
+	/* channel 0 is TV with audiochannel 1 (tuner mono) */
+	/* channel 1 is Composite with audio channel 0 (line in) */
+	/* channel 2 is S-Video with audio channel 0 (line in) */
+	/* channel 3 is additional video inputs to the device with audio channel 0 (line in) */
 
 	RESTRICT_TO_RANGE(channel, 0, usbvision->video_inputs);
 	usbvision->ctl_input = channel;
 
-	// set the new channel
-	// Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video
-	// Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red
-
-	switch (usbvision_device_data[usbvision->DevModel].Codec) {
-		case CODEC_SAA7113:
-			mode[1] = SAA7115_COMPOSITE2;
-			if (SwitchSVideoInput) {
-				/* To handle problems with S-Video Input for
-				 * some devices.  Use SwitchSVideoInput
-				 * parameter when loading the module.*/
-				mode[2] = SAA7115_COMPOSITE1;
-			}
-			else {
-				mode[2] = SAA7115_SVIDEO1;
-			}
-			break;
-		case CODEC_SAA7111:
-		default:
-			/* modes for saa7111 */
-			mode[1] = SAA7115_COMPOSITE1;
+	/* set the new channel */
+	/* Regular USB TV Tuners -> channel: 0 = Television, 1 = Composite, 2 = S-Video */
+	/* Four video input devices -> channel: 0 = Chan White, 1 = Chan Green, 2 = Chan Yellow, 3 = Chan Red */
+
+	switch (usbvision_device_data[usbvision->dev_model].codec) {
+	case CODEC_SAA7113:
+		mode[1] = SAA7115_COMPOSITE2;
+		if (switch_svideo_input) {
+			/* To handle problems with S-Video Input for
+			 * some devices.  Use switch_svideo_input
+			 * parameter when loading the module.*/
+			mode[2] = SAA7115_COMPOSITE1;
+		} else {
 			mode[2] = SAA7115_SVIDEO1;
-			break;
+		}
+		break;
+	case CODEC_SAA7111:
+	default:
+		/* modes for saa7111 */
+		mode[1] = SAA7115_COMPOSITE1;
+		mode[2] = SAA7115_SVIDEO1;
+		break;
 	}
 	call_all(usbvision, video, s_routing, mode[channel], 0, 0);
 	usbvision_set_audio(usbvision, audio[channel]);
diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c
index e3bbae26e3c..05b1344181c 100644
--- a/drivers/media/video/usbvision/usbvision-i2c.c
+++ b/drivers/media/video/usbvision/usbvision-i2c.c
@@ -28,18 +28,18 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <linux/ioport.h>
 #include <linux/errno.h>
 #include <linux/usb.h>
 #include <linux/i2c.h>
 #include "usbvision.h"
 
-#define DBG_I2C		1<<0
+#define DBG_I2C		(1 << 0)
 
 static int i2c_debug;
 
-module_param (i2c_debug, int, 0644);			// debug_i2c_usb mode of the device driver
+module_param(i2c_debug, int, 0644);			/* debug_i2c_usb mode of the device driver */
 MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
 
 #define PDEBUG(level, fmt, args...) { \
@@ -72,8 +72,8 @@ static inline int try_write_address(struct i2c_adapter *i2c_adap,
 		udelay(10);
 	}
 	if (i) {
-		PDEBUG(DBG_I2C,"Needed %d retries for address %#2x", i, addr);
-		PDEBUG(DBG_I2C,"Maybe there's no device at this address");
+		PDEBUG(DBG_I2C, "Needed %d retries for address %#2x", i, addr);
+		PDEBUG(DBG_I2C, "Maybe there's no device at this address");
 	}
 	return ret;
 }
@@ -96,8 +96,8 @@ static inline int try_read_address(struct i2c_adapter *i2c_adap,
 		udelay(10);
 	}
 	if (i) {
-		PDEBUG(DBG_I2C,"Needed %d retries for address %#2x", i, addr);
-		PDEBUG(DBG_I2C,"Maybe there's no device at this address");
+		PDEBUG(DBG_I2C, "Needed %d retries for address %#2x", i, addr);
+		PDEBUG(DBG_I2C, "Maybe there's no device at this address");
 	}
 	return ret;
 }
@@ -143,9 +143,8 @@ static inline int usb_find_address(struct i2c_adapter *i2c_adap,
 		else
 			ret = try_write_address(i2c_adap, addr, retries);
 
-		if (ret != 1) {
+		if (ret != 1)
 			return -EREMOTEIO;
-		}
 	}
 	return 0;
 }
@@ -164,22 +163,20 @@ usbvision_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num)
 		pmsg = &msgs[i];
 		ret = usb_find_address(i2c_adap, pmsg, i2c_adap->retries, &addr);
 		if (ret != 0) {
-			PDEBUG(DBG_I2C,"got NAK from device, message #%d", i);
+			PDEBUG(DBG_I2C, "got NAK from device, message #%d", i);
 			return (ret < 0) ? ret : -EREMOTEIO;
 		}
 
 		if (pmsg->flags & I2C_M_RD) {
 			/* read bytes into buffer */
 			ret = (usbvision_i2c_read(usbvision, addr, pmsg->buf, pmsg->len));
-			if (ret < pmsg->len) {
+			if (ret < pmsg->len)
 				return (ret < 0) ? ret : -EREMOTEIO;
-			}
 		} else {
 			/* write bytes from buffer */
 			ret = (usbvision_i2c_write(usbvision, addr, pmsg->buf, pmsg->len));
-			if (ret < pmsg->len) {
+			if (ret < pmsg->len)
 				return (ret < 0) ? ret : -EREMOTEIO;
-			}
 		}
 	}
 	return num;
@@ -219,7 +216,7 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
 
 	sprintf(usbvision->i2c_adap.name, "%s-%d-%s", i2c_adap_template.name,
 		usbvision->dev->bus->busnum, usbvision->dev->devpath);
-	PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name);
+	PDEBUG(DBG_I2C, "Adaptername: %s", usbvision->i2c_adap.name);
 	usbvision->i2c_adap.dev.parent = &usbvision->dev->dev;
 
 	i2c_set_adapdata(&usbvision->i2c_adap, &usbvision->v4l2_dev);
@@ -244,31 +241,31 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision)
 	PDEBUG(DBG_I2C, "i2c bus for %s registered", usbvision->i2c_adap.name);
 
 	/* Request the load of the i2c modules we need */
-	switch (usbvision_device_data[usbvision->DevModel].Codec) {
+	switch (usbvision_device_data[usbvision->dev_model].codec) {
 	case CODEC_SAA7113:
 	case CODEC_SAA7111:
 		/* Without this delay the detection of the saa711x is
 		   hit-and-miss. */
 		mdelay(10);
 		v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
-				&usbvision->i2c_adap, NULL,
+				&usbvision->i2c_adap,
 				"saa7115_auto", 0, saa711x_addrs);
 		break;
 	}
-	if (usbvision_device_data[usbvision->DevModel].Tuner == 1) {
+	if (usbvision_device_data[usbvision->dev_model].tuner == 1) {
 		struct v4l2_subdev *sd;
 		enum v4l2_i2c_tuner_type type;
 		struct tuner_setup tun_setup;
 
 		sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
-				&usbvision->i2c_adap, NULL,
+				&usbvision->i2c_adap,
 				"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		/* depending on whether we found a demod or not, select
 		   the tuner type. */
 		type = sd ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
 
 		sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
-				&usbvision->i2c_adap, NULL,
+				&usbvision->i2c_adap,
 				"tuner", 0, v4l2_i2c_tuner_addrs(type));
 
 		if (sd == NULL)
@@ -293,7 +290,7 @@ int usbvision_i2c_unregister(struct usb_usbvision *usbvision)
 	i2c_del_adapter(&(usbvision->i2c_adap));
 	usbvision->registered_i2c = 0;
 
-	PDEBUG(DBG_I2C,"i2c bus for %s unregistered", usbvision->i2c_adap.name);
+	PDEBUG(DBG_I2C, "i2c bus for %s unregistered", usbvision->i2c_adap.name);
 
 	return 0;
 }
@@ -355,9 +352,9 @@ usbvision_i2c_read_max4(struct usb_usbvision *usbvision, unsigned char addr,
 
 	if (i2c_debug & DBG_I2C) {
 		int idx;
-		for (idx = 0; idx < len; idx++) {
-			PDEBUG(DBG_I2C,"read %x from address %x", (unsigned char)buf[idx], addr);
-		}
+
+		for (idx = 0; idx < len; idx++)
+			PDEBUG(DBG_I2C, "read %x from address %x", (unsigned char)buf[idx], addr);
 	}
 	return len;
 }
@@ -416,9 +413,9 @@ static int usbvision_i2c_write_max4(struct usb_usbvision *usbvision,
 
 	if (i2c_debug & DBG_I2C) {
 		int idx;
-		for (idx = 0; idx < len; idx++) {
-			PDEBUG(DBG_I2C,"wrote %x at address %x", (unsigned char)buf[idx], addr);
-		}
+
+		for (idx = 0; idx < len; idx++)
+			PDEBUG(DBG_I2C, "wrote %x at address %x", (unsigned char)buf[idx], addr);
 	}
 	return len;
 }
@@ -426,18 +423,18 @@ static int usbvision_i2c_write_max4(struct usb_usbvision *usbvision,
 static int usbvision_i2c_write(struct usb_usbvision *usbvision, unsigned char addr, char *buf,
 			    short len)
 {
-	char *bufPtr = buf;
+	char *buf_ptr = buf;
 	int retval;
 	int wrcount = 0;
 	int count;
-	int maxLen = 4;
+	int max_len = 4;
 
 	while (len > 0) {
-		count = (len > maxLen) ? maxLen : len;
-		retval = usbvision_i2c_write_max4(usbvision, addr, bufPtr, count);
+		count = (len > max_len) ? max_len : len;
+		retval = usbvision_i2c_write_max4(usbvision, addr, buf_ptr, count);
 		if (retval > 0) {
 			len -= count;
-			bufPtr += count;
+			buf_ptr += count;
 			wrcount += count;
 		} else
 			return (retval < 0) ? retval : -EFAULT;
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index db6b828594f..6083137f0bf 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -50,14 +50,13 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/mm.h>
 #include <linux/highmem.h>
 #include <linux/vmalloc.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <linux/videodev2.h>
 #include <linux/i2c.h>
 
@@ -71,8 +70,8 @@
 #include "usbvision.h"
 #include "usbvision-cards.h"
 
-#define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>,\
- Dwaine Garden <DwaineGarden@rogers.com>"
+#define DRIVER_AUTHOR "Joerg Heckenbach <joerg@heckenbach-aw.de>, \
+Dwaine Garden <DwaineGarden@rogers.com>"
 #define DRIVER_NAME "usbvision"
 #define DRIVER_ALIAS "USBVision"
 #define DRIVER_DESC "USBVision USB Video Device Driver for Linux"
@@ -83,9 +82,9 @@
 #define USBVISION_DRIVER_VERSION KERNEL_VERSION(USBVISION_DRIVER_VERSION_MAJOR,\
 USBVISION_DRIVER_VERSION_MINOR,\
 USBVISION_DRIVER_VERSION_PATCHLEVEL)
-#define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR)\
- "." __stringify(USBVISION_DRIVER_VERSION_MINOR)\
- "." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL)
+#define USBVISION_VERSION_STRING __stringify(USBVISION_DRIVER_VERSION_MAJOR) \
+"." __stringify(USBVISION_DRIVER_VERSION_MINOR) \
+"." __stringify(USBVISION_DRIVER_VERSION_PATCHLEVEL)
 
 #define	ENABLE_HEXDUMP	0	/* Enable if you need it */
 
@@ -97,16 +96,16 @@ USBVISION_DRIVER_VERSION_PATCHLEVEL)
 				__func__, __LINE__ , ## args); \
 	}
 #else
-	#define PDEBUG(level, fmt, args...) do {} while(0)
+	#define PDEBUG(level, fmt, args...) do {} while (0)
 #endif
 
-#define DBG_IO		1<<1
-#define DBG_PROBE	1<<2
-#define DBG_MMAP	1<<3
+#define DBG_IO		(1 << 1)
+#define DBG_PROBE	(1 << 2)
+#define DBG_MMAP	(1 << 3)
 
-//String operations
-#define rmspace(str)	while(*str==' ') str++;
-#define goto2next(str)	while(*str!=' ') str++; while(*str==' ') str++;
+/* String operations */
+#define rmspace(str)	while (*str == ' ') str++;
+#define goto2next(str)	while (*str != ' ') str++; while (*str == ' ') str++;
 
 
 /* sequential number of usbvision device */
@@ -119,7 +118,7 @@ static struct usbvision_v4l2_format_st usbvision_v4l2_format[] = {
 	{ 1, 4, 32, V4L2_PIX_FMT_RGB32   , "RGB32" },
 	{ 1, 2, 16, V4L2_PIX_FMT_RGB555  , "RGB555" },
 	{ 1, 2, 16, V4L2_PIX_FMT_YUYV    , "YUV422" },
-	{ 1, 2, 12, V4L2_PIX_FMT_YVU420  , "YUV420P" }, // 1.5 !
+	{ 1, 2, 12, V4L2_PIX_FMT_YVU420  , "YUV420P" }, /* 1.5 ! */
 	{ 1, 2, 16, V4L2_PIX_FMT_YUV422P , "YUV422P" }
 };
 
@@ -128,11 +127,11 @@ static void usbvision_release(struct usb_usbvision *usbvision);
 
 /* Default initialization of device driver parameters */
 /* Set the default format for ISOC endpoint */
-static int isocMode = ISOC_MODE_COMPRESS;
+static int isoc_mode = ISOC_MODE_COMPRESS;
 /* Set the default Debug Mode of the device driver */
 static int video_debug;
 /* Set the default device to power on at startup */
-static int PowerOnAtOpen = 1;
+static int power_on_at_open = 1;
 /* Sequential Number of Video Device */
 static int video_nr = -1;
 /* Sequential Number of Radio Device */
@@ -141,20 +140,20 @@ static int radio_nr = -1;
 /* Grab parameters for the device driver */
 
 /* Showing parameters under SYSFS */
-module_param(isocMode, int, 0444);
+module_param(isoc_mode, int, 0444);
 module_param(video_debug, int, 0444);
-module_param(PowerOnAtOpen, int, 0444);
+module_param(power_on_at_open, int, 0444);
 module_param(video_nr, int, 0444);
 module_param(radio_nr, int, 0444);
 
-MODULE_PARM_DESC(isocMode, " Set the default format for ISOC endpoint.  Default: 0x60 (Compression On)");
+MODULE_PARM_DESC(isoc_mode, " Set the default format for ISOC endpoint.  Default: 0x60 (Compression On)");
 MODULE_PARM_DESC(video_debug, " Set the default Debug Mode of the device driver.  Default: 0 (Off)");
-MODULE_PARM_DESC(PowerOnAtOpen, " Set the default device to power on when device is opened.  Default: 1 (On)");
+MODULE_PARM_DESC(power_on_at_open, " Set the default device to power on when device is opened.  Default: 1 (On)");
 MODULE_PARM_DESC(video_nr, "Set video device number (/dev/videoX).  Default: -1 (autodetect)");
 MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX).  Default: -1 (autodetect)");
 
 
-// Misc stuff
+/* Misc stuff */
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE(DRIVER_LICENSE);
@@ -193,7 +192,7 @@ static ssize_t show_model(struct device *cd,
 		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
-		       usbvision_device_data[usbvision->DevModel].ModelString);
+		       usbvision_device_data[usbvision->dev_model].model_string);
 }
 static DEVICE_ATTR(model, S_IRUGO, show_model, NULL);
 
@@ -206,7 +205,7 @@ static ssize_t show_hue(struct device *cd,
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_HUE;
 	ctrl.value = 0;
-	if(usbvision->user)
+	if (usbvision->user)
 		call_all(usbvision, core, g_ctrl, &ctrl);
 	return sprintf(buf, "%d\n", ctrl.value);
 }
@@ -221,7 +220,7 @@ static ssize_t show_contrast(struct device *cd,
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_CONTRAST;
 	ctrl.value = 0;
-	if(usbvision->user)
+	if (usbvision->user)
 		call_all(usbvision, core, g_ctrl, &ctrl);
 	return sprintf(buf, "%d\n", ctrl.value);
 }
@@ -236,7 +235,7 @@ static ssize_t show_brightness(struct device *cd,
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_BRIGHTNESS;
 	ctrl.value = 0;
-	if(usbvision->user)
+	if (usbvision->user)
 		call_all(usbvision, core, g_ctrl, &ctrl);
 	return sprintf(buf, "%d\n", ctrl.value);
 }
@@ -251,7 +250,7 @@ static ssize_t show_saturation(struct device *cd,
 	struct v4l2_control ctrl;
 	ctrl.id = V4L2_CID_SATURATION;
 	ctrl.value = 0;
-	if(usbvision->user)
+	if (usbvision->user)
 		call_all(usbvision, core, g_ctrl, &ctrl);
 	return sprintf(buf, "%d\n", ctrl.value);
 }
@@ -264,7 +263,7 @@ static ssize_t show_streaming(struct device *cd,
 		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
-		       YES_NO(usbvision->streaming==Stream_On?1:0));
+		       YES_NO(usbvision->streaming == stream_on ? 1 : 0));
 }
 static DEVICE_ATTR(streaming, S_IRUGO, show_streaming, NULL);
 
@@ -275,7 +274,7 @@ static ssize_t show_compression(struct device *cd,
 		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
 	return sprintf(buf, "%s\n",
-		       YES_NO(usbvision->isocMode==ISOC_MODE_COMPRESS));
+		       YES_NO(usbvision->isoc_mode == ISOC_MODE_COMPRESS));
 }
 static DEVICE_ATTR(compression, S_IRUGO, show_compression, NULL);
 
@@ -285,42 +284,43 @@ static ssize_t show_device_bridge(struct device *cd,
 	struct video_device *vdev =
 		container_of(cd, struct video_device, dev);
 	struct usb_usbvision *usbvision = video_get_drvdata(vdev);
-	return sprintf(buf, "%d\n", usbvision->bridgeType);
+	return sprintf(buf, "%d\n", usbvision->bridge_type);
 }
 static DEVICE_ATTR(bridge, S_IRUGO, show_device_bridge, NULL);
 
 static void usbvision_create_sysfs(struct video_device *vdev)
 {
 	int res;
+
 	if (!vdev)
 		return;
 	do {
 		res = device_create_file(&vdev->dev, &dev_attr_version);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_model);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_hue);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_contrast);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_brightness);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_saturation);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_streaming);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_compression);
-		if (res<0)
+		if (res < 0)
 			break;
 		res = device_create_file(&vdev->dev, &dev_attr_bridge);
-		if (res>=0)
+		if (res >= 0)
 			return;
 	} while (0);
 
@@ -353,24 +353,23 @@ static void usbvision_remove_sysfs(struct video_device *vdev)
 static int usbvision_v4l2_open(struct file *file)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_IO, "open");
 
-	mutex_lock(&usbvision->lock);
-	usbvision_reset_powerOffTimer(usbvision);
+	usbvision_reset_power_off_timer(usbvision);
 
 	if (usbvision->user)
-		errCode = -EBUSY;
+		err_code = -EBUSY;
 	else {
 		/* Allocate memory for the scratch ring buffer */
-		errCode = usbvision_scratch_alloc(usbvision);
-		if (isocMode==ISOC_MODE_COMPRESS) {
+		err_code = usbvision_scratch_alloc(usbvision);
+		if (isoc_mode == ISOC_MODE_COMPRESS) {
 			/* Allocate intermediate decompression buffers
 			   only if needed */
-			errCode = usbvision_decompress_alloc(usbvision);
+			err_code = usbvision_decompress_alloc(usbvision);
 		}
-		if (errCode) {
+		if (err_code) {
 			/* Deallocate all buffers if trouble */
 			usbvision_scratch_free(usbvision);
 			usbvision_decompress_free(usbvision);
@@ -378,7 +377,7 @@ static int usbvision_v4l2_open(struct file *file)
 	}
 
 	/* If so far no errors then we shall start the camera */
-	if (!errCode) {
+	if (!err_code) {
 		if (usbvision->power == 0) {
 			usbvision_power_on(usbvision);
 			usbvision_i2c_register(usbvision);
@@ -387,21 +386,21 @@ static int usbvision_v4l2_open(struct file *file)
 		/* Send init sequence only once, it's large! */
 		if (!usbvision->initialized) {
 			int setup_ok = 0;
-			setup_ok = usbvision_setup(usbvision,isocMode);
+			setup_ok = usbvision_setup(usbvision, isoc_mode);
 			if (setup_ok)
 				usbvision->initialized = 1;
 			else
-				errCode = -EBUSY;
+				err_code = -EBUSY;
 		}
 
-		if (!errCode) {
+		if (!err_code) {
 			usbvision_begin_streaming(usbvision);
-			errCode = usbvision_init_isoc(usbvision);
+			err_code = usbvision_init_isoc(usbvision);
 			/* device must be initialized before isoc transfer */
-			usbvision_muxsel(usbvision,0);
+			usbvision_muxsel(usbvision, 0);
 			usbvision->user++;
 		} else {
-			if (PowerOnAtOpen) {
+			if (power_on_at_open) {
 				usbvision_i2c_unregister(usbvision);
 				usbvision_power_off(usbvision);
 				usbvision->initialized = 0;
@@ -413,8 +412,7 @@ static int usbvision_v4l2_open(struct file *file)
 	usbvision_empty_framequeues(usbvision);
 
 	PDEBUG(DBG_IO, "success");
-	mutex_unlock(&usbvision->lock);
-	return errCode;
+	return err_code;
 }
 
 /*
@@ -430,7 +428,6 @@ static int usbvision_v4l2_close(struct file *file)
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
 	PDEBUG(DBG_IO, "close");
-	mutex_lock(&usbvision->lock);
 
 	usbvision_audio_off(usbvision);
 	usbvision_restart_isoc(usbvision);
@@ -443,15 +440,13 @@ static int usbvision_v4l2_close(struct file *file)
 
 	usbvision->user--;
 
-	if (PowerOnAtOpen) {
+	if (power_on_at_open) {
 		/* power off in a little while
 		   to avoid off/on every close/open short sequences */
-		usbvision_set_powerOffTimer(usbvision);
+		usbvision_set_power_off_timer(usbvision);
 		usbvision->initialized = 0;
 	}
 
-	mutex_unlock(&usbvision->lock);
-
 	if (usbvision->remove_pending) {
 		printk(KERN_INFO "%s: Final disconnect\n", __func__);
 		usbvision_release(usbvision);
@@ -469,55 +464,55 @@ static int usbvision_v4l2_close(struct file *file)
  *
  */
 #ifdef CONFIG_VIDEO_ADV_DEBUG
-static int vidioc_g_register (struct file *file, void *priv,
+static int vidioc_g_register(struct file *file, void *priv,
 				struct v4l2_dbg_register *reg)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int errCode;
+	int err_code;
 
 	if (!v4l2_chip_match_host(&reg->match))
 		return -EINVAL;
 	/* NT100x has a 8-bit register space */
-	errCode = usbvision_read_reg(usbvision, reg->reg&0xff);
-	if (errCode < 0) {
+	err_code = usbvision_read_reg(usbvision, reg->reg&0xff);
+	if (err_code < 0) {
 		dev_err(&usbvision->vdev->dev,
 			"%s: VIDIOC_DBG_G_REGISTER failed: error %d\n",
-				__func__, errCode);
-		return errCode;
+				__func__, err_code);
+		return err_code;
 	}
-	reg->val = errCode;
+	reg->val = err_code;
 	reg->size = 1;
 	return 0;
 }
 
-static int vidioc_s_register (struct file *file, void *priv,
+static int vidioc_s_register(struct file *file, void *priv,
 				struct v4l2_dbg_register *reg)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int errCode;
+	int err_code;
 
 	if (!v4l2_chip_match_host(&reg->match))
 		return -EINVAL;
 	/* NT100x has a 8-bit register space */
-	errCode = usbvision_write_reg(usbvision, reg->reg&0xff, reg->val);
-	if (errCode < 0) {
+	err_code = usbvision_write_reg(usbvision, reg->reg & 0xff, reg->val);
+	if (err_code < 0) {
 		dev_err(&usbvision->vdev->dev,
 			"%s: VIDIOC_DBG_S_REGISTER failed: error %d\n",
-				__func__, errCode);
-		return errCode;
+				__func__, err_code);
+		return err_code;
 	}
 	return 0;
 }
 #endif
 
-static int vidioc_querycap (struct file *file, void  *priv,
+static int vidioc_querycap(struct file *file, void  *priv,
 					struct v4l2_capability *vc)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
 	strlcpy(vc->driver, "USBVision", sizeof(vc->driver));
 	strlcpy(vc->card,
-		usbvision_device_data[usbvision->DevModel].ModelString,
+		usbvision_device_data[usbvision->dev_model].model_string,
 		sizeof(vc->card));
 	usb_make_path(usbvision->dev, vc->bus_info, sizeof(vc->bus_info));
 	vc->version = USBVISION_DRIVER_VERSION;
@@ -529,7 +524,7 @@ static int vidioc_querycap (struct file *file, void  *priv,
 	return 0;
 }
 
-static int vidioc_enum_input (struct file *file, void *priv,
+static int vidioc_enum_input(struct file *file, void *priv,
 				struct v4l2_input *vi)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -537,16 +532,16 @@ static int vidioc_enum_input (struct file *file, void *priv,
 
 	if (vi->index >= usbvision->video_inputs)
 		return -EINVAL;
-	if (usbvision->have_tuner) {
+	if (usbvision->have_tuner)
 		chan = vi->index;
-	} else {
-		chan = vi->index + 1; /*skip Television string*/
-	}
+	else
+		chan = vi->index + 1; /* skip Television string*/
+
 	/* Determine the requested input characteristics
 	   specific for each usbvision card model */
-	switch(chan) {
+	switch (chan) {
 	case 0:
-		if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+		if (usbvision_device_data[usbvision->dev_model].video_channels == 4) {
 			strcpy(vi->name, "White Video Input");
 		} else {
 			strcpy(vi->name, "Television");
@@ -558,20 +553,18 @@ static int vidioc_enum_input (struct file *file, void *priv,
 		break;
 	case 1:
 		vi->type = V4L2_INPUT_TYPE_CAMERA;
-		if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+		if (usbvision_device_data[usbvision->dev_model].video_channels == 4)
 			strcpy(vi->name, "Green Video Input");
-		} else {
+		else
 			strcpy(vi->name, "Composite Video Input");
-		}
 		vi->std = V4L2_STD_PAL;
 		break;
 	case 2:
 		vi->type = V4L2_INPUT_TYPE_CAMERA;
-		if (usbvision_device_data[usbvision->DevModel].VideoChannels == 4) {
+		if (usbvision_device_data[usbvision->dev_model].video_channels == 4)
 			strcpy(vi->name, "Yellow Video Input");
-		} else {
+		else
 			strcpy(vi->name, "S-Video Input");
-		}
 		vi->std = V4L2_STD_PAL;
 		break;
 	case 3:
@@ -583,7 +576,7 @@ static int vidioc_enum_input (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_g_input (struct file *file, void *priv, unsigned int *input)
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *input)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
@@ -591,46 +584,42 @@ static int vidioc_g_input (struct file *file, void *priv, unsigned int *input)
 	return 0;
 }
 
-static int vidioc_s_input (struct file *file, void *priv, unsigned int input)
+static int vidioc_s_input(struct file *file, void *priv, unsigned int input)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
 	if (input >= usbvision->video_inputs)
 		return -EINVAL;
 
-	mutex_lock(&usbvision->lock);
 	usbvision_muxsel(usbvision, input);
 	usbvision_set_input(usbvision);
 	usbvision_set_output(usbvision,
 			     usbvision->curwidth,
 			     usbvision->curheight);
-	mutex_unlock(&usbvision->lock);
 	return 0;
 }
 
-static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *id)
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	usbvision->tvnormId=*id;
+	usbvision->tvnorm_id = *id;
 
-	mutex_lock(&usbvision->lock);
-	call_all(usbvision, core, s_std, usbvision->tvnormId);
-	mutex_unlock(&usbvision->lock);
+	call_all(usbvision, core, s_std, usbvision->tvnorm_id);
 	/* propagate the change to the decoder */
 	usbvision_muxsel(usbvision, usbvision->ctl_input);
 
 	return 0;
 }
 
-static int vidioc_g_tuner (struct file *file, void *priv,
+static int vidioc_g_tuner(struct file *file, void *priv,
 				struct v4l2_tuner *vt)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	if (!usbvision->have_tuner || vt->index)	// Only tuner 0
+	if (!usbvision->have_tuner || vt->index)	/* Only tuner 0 */
 		return -EINVAL;
-	if(usbvision->radio) {
+	if (usbvision->radio) {
 		strcpy(vt->name, "Radio");
 		vt->type = V4L2_TUNER_RADIO;
 	} else {
@@ -642,12 +631,12 @@ static int vidioc_g_tuner (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_s_tuner (struct file *file, void *priv,
+static int vidioc_s_tuner(struct file *file, void *priv,
 				struct v4l2_tuner *vt)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	// Only no or one tuner for now
+	/* Only no or one tuner for now */
 	if (!usbvision->have_tuner || vt->index)
 		return -EINVAL;
 	/* let clients handle this */
@@ -656,28 +645,27 @@ static int vidioc_s_tuner (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_g_frequency (struct file *file, void *priv,
+static int vidioc_g_frequency(struct file *file, void *priv,
 				struct v4l2_frequency *freq)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	freq->tuner = 0; // Only one tuner
-	if(usbvision->radio) {
+	freq->tuner = 0; /* Only one tuner */
+	if (usbvision->radio)
 		freq->type = V4L2_TUNER_RADIO;
-	} else {
+	else
 		freq->type = V4L2_TUNER_ANALOG_TV;
-	}
 	freq->frequency = usbvision->freq;
 
 	return 0;
 }
 
-static int vidioc_s_frequency (struct file *file, void *priv,
+static int vidioc_s_frequency(struct file *file, void *priv,
 				struct v4l2_frequency *freq)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	// Only no or one tuner for now
+	/* Only no or one tuner for now */
 	if (!usbvision->have_tuner || freq->tuner)
 		return -EINVAL;
 
@@ -687,30 +675,27 @@ static int vidioc_s_frequency (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_g_audio (struct file *file, void *priv, struct v4l2_audio *a)
+static int vidioc_g_audio(struct file *file, void *priv, struct v4l2_audio *a)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	if(usbvision->radio) {
-		strcpy(a->name,"Radio");
-	} else {
+	if (usbvision->radio)
+		strcpy(a->name, "Radio");
+	else
 		strcpy(a->name, "TV");
-	}
 
 	return 0;
 }
 
-static int vidioc_s_audio (struct file *file, void *fh,
+static int vidioc_s_audio(struct file *file, void *fh,
 			  struct v4l2_audio *a)
 {
-	if(a->index) {
+	if (a->index)
 		return -EINVAL;
-	}
-
 	return 0;
 }
 
-static int vidioc_queryctrl (struct file *file, void *priv,
+static int vidioc_queryctrl(struct file *file, void *priv,
 			    struct v4l2_queryctrl *ctrl)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -723,52 +708,53 @@ static int vidioc_queryctrl (struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_g_ctrl (struct file *file, void *priv,
+static int vidioc_g_ctrl(struct file *file, void *priv,
 				struct v4l2_control *ctrl)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	call_all(usbvision, core, g_ctrl, ctrl);
 
+	call_all(usbvision, core, g_ctrl, ctrl);
 	return 0;
 }
 
-static int vidioc_s_ctrl (struct file *file, void *priv,
+static int vidioc_s_ctrl(struct file *file, void *priv,
 				struct v4l2_control *ctrl)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	call_all(usbvision, core, s_ctrl, ctrl);
 
+	call_all(usbvision, core, s_ctrl, ctrl);
 	return 0;
 }
 
-static int vidioc_reqbufs (struct file *file,
+static int vidioc_reqbufs(struct file *file,
 			   void *priv, struct v4l2_requestbuffers *vr)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int ret;
 
-	RESTRICT_TO_RANGE(vr->count,1,USBVISION_NUMFRAMES);
+	RESTRICT_TO_RANGE(vr->count, 1, USBVISION_NUMFRAMES);
 
 	/* Check input validity:
 	   the user must do a VIDEO CAPTURE and MMAP method. */
 	if (vr->memory != V4L2_MEMORY_MMAP)
 		return -EINVAL;
 
-	if(usbvision->streaming == Stream_On) {
-		if ((ret = usbvision_stream_interrupt(usbvision)))
+	if (usbvision->streaming == stream_on) {
+		ret = usbvision_stream_interrupt(usbvision);
+		if (ret)
 			return ret;
 	}
 
 	usbvision_frames_free(usbvision);
 	usbvision_empty_framequeues(usbvision);
-	vr->count = usbvision_frames_alloc(usbvision,vr->count);
+	vr->count = usbvision_frames_alloc(usbvision, vr->count);
 
-	usbvision->curFrame = NULL;
+	usbvision->cur_frame = NULL;
 
 	return 0;
 }
 
-static int vidioc_querybuf (struct file *file,
+static int vidioc_querybuf(struct file *file,
 			    void *priv, struct v4l2_buffer *vb)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -776,52 +762,49 @@ static int vidioc_querybuf (struct file *file,
 
 	/* FIXME : must control
 	   that buffers are mapped (VIDIOC_REQBUFS has been called) */
-	if(vb->index>=usbvision->num_frames)  {
+	if (vb->index >= usbvision->num_frames)
 		return -EINVAL;
-	}
 	/* Updating the corresponding frame state */
 	vb->flags = 0;
 	frame = &usbvision->frame[vb->index];
-	if(frame->grabstate >= FrameState_Ready)
+	if (frame->grabstate >= frame_state_ready)
 		vb->flags |= V4L2_BUF_FLAG_QUEUED;
-	if(frame->grabstate >= FrameState_Done)
+	if (frame->grabstate >= frame_state_done)
 		vb->flags |= V4L2_BUF_FLAG_DONE;
-	if(frame->grabstate == FrameState_Unused)
+	if (frame->grabstate == frame_state_unused)
 		vb->flags |= V4L2_BUF_FLAG_MAPPED;
 	vb->memory = V4L2_MEMORY_MMAP;
 
-	vb->m.offset = vb->index*PAGE_ALIGN(usbvision->max_frame_size);
+	vb->m.offset = vb->index * PAGE_ALIGN(usbvision->max_frame_size);
 
 	vb->memory = V4L2_MEMORY_MMAP;
 	vb->field = V4L2_FIELD_NONE;
-	vb->length = usbvision->curwidth*
-		usbvision->curheight*
+	vb->length = usbvision->curwidth *
+		usbvision->curheight *
 		usbvision->palette.bytes_per_pixel;
 	vb->timestamp = usbvision->frame[vb->index].timestamp;
 	vb->sequence = usbvision->frame[vb->index].sequence;
 	return 0;
 }
 
-static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
+static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *vb)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	struct usbvision_frame *frame;
 	unsigned long lock_flags;
 
 	/* FIXME : works only on VIDEO_CAPTURE MODE, MMAP. */
-	if(vb->index>=usbvision->num_frames)  {
+	if (vb->index >= usbvision->num_frames)
 		return -EINVAL;
-	}
 
 	frame = &usbvision->frame[vb->index];
 
-	if (frame->grabstate != FrameState_Unused) {
+	if (frame->grabstate != frame_state_unused)
 		return -EAGAIN;
-	}
 
 	/* Mark it as ready and enqueue frame */
-	frame->grabstate = FrameState_Ready;
-	frame->scanstate = ScanState_Scanning;
+	frame->grabstate = frame_state_ready;
+	frame->scanstate = scan_state_scanning;
 	frame->scanlength = 0;	/* Accumulated in usbvision_parse_data() */
 
 	vb->flags &= ~V4L2_BUF_FLAG_DONE;
@@ -836,7 +819,7 @@ static int vidioc_qbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
 	return 0;
 }
 
-static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
+static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *vb)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int ret;
@@ -844,7 +827,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
 	unsigned long lock_flags;
 
 	if (list_empty(&(usbvision->outqueue))) {
-		if (usbvision->streaming == Stream_Idle)
+		if (usbvision->streaming == stream_idle)
 			return -EINVAL;
 		ret = wait_event_interruptible
 			(usbvision->wait_frame,
@@ -859,7 +842,7 @@ static int vidioc_dqbuf (struct file *file, void *priv, struct v4l2_buffer *vb)
 	list_del(usbvision->outqueue.next);
 	spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
 
-	f->grabstate = FrameState_Unused;
+	f->grabstate = frame_state_unused;
 
 	vb->memory = V4L2_MEMORY_MMAP;
 	vb->flags = V4L2_BUF_FLAG_MAPPED |
@@ -878,7 +861,7 @@ static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
 
-	usbvision->streaming = Stream_On;
+	usbvision->streaming = stream_on;
 	call_all(usbvision, video, s_stream, 1);
 
 	return 0;
@@ -892,7 +875,7 @@ static int vidioc_streamoff(struct file *file,
 	if (type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		return -EINVAL;
 
-	if(usbvision->streaming == Stream_On) {
+	if (usbvision->streaming == stream_on) {
 		usbvision_stream_interrupt(usbvision);
 		/* Stop all video streamings */
 		call_all(usbvision, video, s_stream, 0);
@@ -902,18 +885,17 @@ static int vidioc_streamoff(struct file *file,
 	return 0;
 }
 
-static int vidioc_enum_fmt_vid_cap (struct file *file, void  *priv,
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
 					struct v4l2_fmtdesc *vfd)
 {
-	if(vfd->index>=USBVISION_SUPPORTED_PALETTES-1) {
+	if (vfd->index >= USBVISION_SUPPORTED_PALETTES - 1)
 		return -EINVAL;
-	}
-	strcpy(vfd->description,usbvision_v4l2_format[vfd->index].desc);
+	strcpy(vfd->description, usbvision_v4l2_format[vfd->index].desc);
 	vfd->pixelformat = usbvision_v4l2_format[vfd->index].format;
 	return 0;
 }
 
-static int vidioc_g_fmt_vid_cap (struct file *file, void *priv,
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
 					struct v4l2_format *vf)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
@@ -921,32 +903,31 @@ static int vidioc_g_fmt_vid_cap (struct file *file, void *priv,
 	vf->fmt.pix.height = usbvision->curheight;
 	vf->fmt.pix.pixelformat = usbvision->palette.format;
 	vf->fmt.pix.bytesperline =
-		usbvision->curwidth*usbvision->palette.bytes_per_pixel;
-	vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline*usbvision->curheight;
+		usbvision->curwidth * usbvision->palette.bytes_per_pixel;
+	vf->fmt.pix.sizeimage = vf->fmt.pix.bytesperline * usbvision->curheight;
 	vf->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
 	vf->fmt.pix.field = V4L2_FIELD_NONE; /* Always progressive image */
 
 	return 0;
 }
 
-static int vidioc_try_fmt_vid_cap (struct file *file, void *priv,
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 			       struct v4l2_format *vf)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int formatIdx;
+	int format_idx;
 
 	/* Find requested format in available ones */
-	for(formatIdx=0;formatIdx<USBVISION_SUPPORTED_PALETTES;formatIdx++) {
-		if(vf->fmt.pix.pixelformat ==
-		   usbvision_v4l2_format[formatIdx].format) {
-			usbvision->palette = usbvision_v4l2_format[formatIdx];
+	for (format_idx = 0; format_idx < USBVISION_SUPPORTED_PALETTES; format_idx++) {
+		if (vf->fmt.pix.pixelformat ==
+		   usbvision_v4l2_format[format_idx].format) {
+			usbvision->palette = usbvision_v4l2_format[format_idx];
 			break;
 		}
 	}
 	/* robustness */
-	if(formatIdx == USBVISION_SUPPORTED_PALETTES) {
+	if (format_idx == USBVISION_SUPPORTED_PALETTES)
 		return -EINVAL;
-	}
 	RESTRICT_TO_RANGE(vf->fmt.pix.width, MIN_FRAME_WIDTH, MAX_FRAME_WIDTH);
 	RESTRICT_TO_RANGE(vf->fmt.pix.height, MIN_FRAME_HEIGHT, MAX_FRAME_HEIGHT);
 
@@ -963,24 +944,23 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int ret;
 
-	if( 0 != (ret=vidioc_try_fmt_vid_cap (file, priv, vf)) ) {
+	ret = vidioc_try_fmt_vid_cap(file, priv, vf);
+	if (ret)
 		return ret;
-	}
 
 	/* stop io in case it is already in progress */
-	if(usbvision->streaming == Stream_On) {
-		if ((ret = usbvision_stream_interrupt(usbvision)))
+	if (usbvision->streaming == stream_on) {
+		ret = usbvision_stream_interrupt(usbvision);
+		if (ret)
 			return ret;
 	}
 	usbvision_frames_free(usbvision);
 	usbvision_empty_framequeues(usbvision);
 
-	usbvision->curFrame = NULL;
+	usbvision->cur_frame = NULL;
 
 	/* by now we are committed to the new data... */
-	mutex_lock(&usbvision->lock);
 	usbvision_set_output(usbvision, vf->fmt.pix.width, vf->fmt.pix.height);
-	mutex_unlock(&usbvision->lock);
 
 	return 0;
 }
@@ -991,8 +971,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	struct usb_usbvision *usbvision = video_drvdata(file);
 	int noblock = file->f_flags & O_NONBLOCK;
 	unsigned long lock_flags;
-
-	int ret,i;
+	int ret, i;
 	struct usbvision_frame *frame;
 
 	PDEBUG(DBG_IO, "%s: %ld bytes, noblock=%d", __func__,
@@ -1004,28 +983,28 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	/* This entry point is compatible with the mmap routines
 	   so that a user can do either VIDIOC_QBUF/VIDIOC_DQBUF
 	   to get frames or call read on the device. */
-	if(!usbvision->num_frames) {
+	if (!usbvision->num_frames) {
 		/* First, allocate some frames to work with
 		   if this has not been done with VIDIOC_REQBUF */
 		usbvision_frames_free(usbvision);
 		usbvision_empty_framequeues(usbvision);
-		usbvision_frames_alloc(usbvision,USBVISION_NUMFRAMES);
+		usbvision_frames_alloc(usbvision, USBVISION_NUMFRAMES);
 	}
 
-	if(usbvision->streaming != Stream_On) {
+	if (usbvision->streaming != stream_on) {
 		/* no stream is running, make it running ! */
-		usbvision->streaming = Stream_On;
+		usbvision->streaming = stream_on;
 		call_all(usbvision, video, s_stream, 1);
 	}
 
 	/* Then, enqueue as many frames as possible
 	   (like a user of VIDIOC_QBUF would do) */
-	for(i=0;i<usbvision->num_frames;i++) {
+	for (i = 0; i < usbvision->num_frames; i++) {
 		frame = &usbvision->frame[i];
-		if(frame->grabstate == FrameState_Unused) {
+		if (frame->grabstate == frame_state_unused) {
 			/* Mark it as ready and enqueue frame */
-			frame->grabstate = FrameState_Ready;
-			frame->scanstate = ScanState_Scanning;
+			frame->grabstate = frame_state_ready;
+			frame->scanstate = scan_state_scanning;
 			/* Accumulated in usbvision_parse_data() */
 			frame->scanlength = 0;
 
@@ -1041,7 +1020,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 
 	/* Then try to steal a frame (like a VIDIOC_DQBUF would do) */
 	if (list_empty(&(usbvision->outqueue))) {
-		if(noblock)
+		if (noblock)
 			return -EAGAIN;
 
 		ret = wait_event_interruptible
@@ -1058,7 +1037,7 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	spin_unlock_irqrestore(&usbvision->queue_lock, lock_flags);
 
 	/* An error returns an empty frame */
-	if (frame->grabstate == FrameState_Error) {
+	if (frame->grabstate == frame_state_error) {
 		frame->bytes_read = 0;
 		return 0;
 	}
@@ -1071,9 +1050,8 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	if ((count + frame->bytes_read) > (unsigned long)frame->scanlength)
 		count = frame->scanlength - frame->bytes_read;
 
-	if (copy_to_user(buf, frame->data + frame->bytes_read, count)) {
+	if (copy_to_user(buf, frame->data + frame->bytes_read, count))
 		return -EFAULT;
-	}
 
 	frame->bytes_read += count;
 	PDEBUG(DBG_IO, "%s: {copy} count used=%ld, new bytes_read=%ld",
@@ -1081,12 +1059,12 @@ static ssize_t usbvision_v4l2_read(struct file *file, char __user *buf,
 	       (unsigned long)count, frame->bytes_read);
 
 	/* For now, forget the frame if it has not been read in one shot. */
-/* 	if (frame->bytes_read >= frame->scanlength) {// All data has been read */
+/*	if (frame->bytes_read >= frame->scanlength) {*/ /* All data has been read */
 		frame->bytes_read = 0;
 
 		/* Mark it as available to be used again. */
-		frame->grabstate = FrameState_Unused;
-/* 	} */
+		frame->grabstate = frame_state_unused;
+/*	} */
 
 	return count;
 }
@@ -1101,16 +1079,11 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 
 	PDEBUG(DBG_MMAP, "mmap");
 
-	mutex_lock(&usbvision->lock);
-
-	if (!USBVISION_IS_OPERATIONAL(usbvision)) {
-		mutex_unlock(&usbvision->lock);
+	if (!USBVISION_IS_OPERATIONAL(usbvision))
 		return -EFAULT;
-	}
 
 	if (!(vma->vm_flags & VM_WRITE) ||
 	    size != PAGE_ALIGN(usbvision->max_frame_size)) {
-		mutex_unlock(&usbvision->lock);
 		return -EINVAL;
 	}
 
@@ -1122,7 +1095,6 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 	if (i == usbvision->num_frames) {
 		PDEBUG(DBG_MMAP,
 		       "mmap: user supplied mapping address is out of range");
-		mutex_unlock(&usbvision->lock);
 		return -EINVAL;
 	}
 
@@ -1132,10 +1104,8 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 
 	pos = usbvision->frame[i].data;
 	while (size > 0) {
-
 		if (vm_insert_page(vma, start, vmalloc_to_page(pos))) {
 			PDEBUG(DBG_MMAP, "mmap: vm_insert_page failed");
-			mutex_unlock(&usbvision->lock);
 			return -EAGAIN;
 		}
 		start += PAGE_SIZE;
@@ -1143,7 +1113,6 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 		size -= PAGE_SIZE;
 	}
 
-	mutex_unlock(&usbvision->lock);
 	return 0;
 }
 
@@ -1155,21 +1124,18 @@ static int usbvision_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 static int usbvision_radio_open(struct file *file)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_IO, "%s:", __func__);
 
-	mutex_lock(&usbvision->lock);
-
 	if (usbvision->user) {
 		dev_err(&usbvision->rdev->dev,
 			"%s: Someone tried to open an already opened USBVision Radio!\n",
 				__func__);
-		errCode = -EBUSY;
-	}
-	else {
-		if(PowerOnAtOpen) {
-			usbvision_reset_powerOffTimer(usbvision);
+		err_code = -EBUSY;
+	} else {
+		if (power_on_at_open) {
+			usbvision_reset_power_off_timer(usbvision);
 			if (usbvision->power == 0) {
 				usbvision_power_on(usbvision);
 				usbvision_i2c_register(usbvision);
@@ -1177,80 +1143,73 @@ static int usbvision_radio_open(struct file *file)
 		}
 
 		/* Alternate interface 1 is is the biggest frame size */
-		errCode = usbvision_set_alternate(usbvision);
-		if (errCode < 0) {
-			usbvision->last_error = errCode;
-			errCode = -EBUSY;
+		err_code = usbvision_set_alternate(usbvision);
+		if (err_code < 0) {
+			usbvision->last_error = err_code;
+			err_code = -EBUSY;
 			goto out;
 		}
 
-		// If so far no errors then we shall start the radio
+		/* If so far no errors then we shall start the radio */
 		usbvision->radio = 1;
 		call_all(usbvision, tuner, s_radio);
 		usbvision_set_audio(usbvision, USBVISION_AUDIO_RADIO);
 		usbvision->user++;
 	}
 
-	if (errCode) {
-		if (PowerOnAtOpen) {
+	if (err_code) {
+		if (power_on_at_open) {
 			usbvision_i2c_unregister(usbvision);
 			usbvision_power_off(usbvision);
 			usbvision->initialized = 0;
 		}
 	}
 out:
-	mutex_unlock(&usbvision->lock);
-	return errCode;
+	return err_code;
 }
 
 
 static int usbvision_radio_close(struct file *file)
 {
 	struct usb_usbvision *usbvision = video_drvdata(file);
-	int errCode = 0;
+	int err_code = 0;
 
 	PDEBUG(DBG_IO, "");
 
-	mutex_lock(&usbvision->lock);
-
 	/* Set packet size to 0 */
-	usbvision->ifaceAlt=0;
-	errCode = usb_set_interface(usbvision->dev, usbvision->iface,
-				    usbvision->ifaceAlt);
+	usbvision->iface_alt = 0;
+	err_code = usb_set_interface(usbvision->dev, usbvision->iface,
+				    usbvision->iface_alt);
 
 	usbvision_audio_off(usbvision);
-	usbvision->radio=0;
+	usbvision->radio = 0;
 	usbvision->user--;
 
-	if (PowerOnAtOpen) {
-		usbvision_set_powerOffTimer(usbvision);
+	if (power_on_at_open) {
+		usbvision_set_power_off_timer(usbvision);
 		usbvision->initialized = 0;
 	}
 
-	mutex_unlock(&usbvision->lock);
-
 	if (usbvision->remove_pending) {
 		printk(KERN_INFO "%s: Final disconnect\n", __func__);
 		usbvision_release(usbvision);
 	}
 
 	PDEBUG(DBG_IO, "success");
-	return errCode;
+	return err_code;
 }
 
-//
-// Video registration stuff
-//
+/* Video registration stuff */
 
-// Video template
+/* Video template */
 static const struct v4l2_file_operations usbvision_fops = {
 	.owner             = THIS_MODULE,
 	.open		= usbvision_v4l2_open,
 	.release	= usbvision_v4l2_close,
 	.read		= usbvision_v4l2_read,
 	.mmap		= usbvision_v4l2_mmap,
-	.ioctl		= video_ioctl2,
-/* 	.poll          = video_poll, */
+	.unlocked_ioctl	= video_ioctl2,
+/*	.poll		= video_poll, */
 };
 
 static const struct v4l2_ioctl_ops usbvision_ioctl_ops = {
@@ -1274,9 +1233,6 @@ static const struct v4l2_ioctl_ops usbvision_ioctl_ops = {
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
 	.vidioc_streamon      = vidioc_streamon,
 	.vidioc_streamoff     = vidioc_streamoff,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-/*  	.vidiocgmbuf          = vidiocgmbuf, */
-#endif
 	.vidioc_g_tuner       = vidioc_g_tuner,
 	.vidioc_s_tuner       = vidioc_s_tuner,
 	.vidioc_g_frequency   = vidioc_g_frequency,
@@ -1289,20 +1245,20 @@ static const struct v4l2_ioctl_ops usbvision_ioctl_ops = {
 
 static struct video_device usbvision_video_template = {
 	.fops		= &usbvision_fops,
-	.ioctl_ops 	= &usbvision_ioctl_ops,
+	.ioctl_ops	= &usbvision_ioctl_ops,
 	.name           = "usbvision-video",
 	.release	= video_device_release,
-	.tvnorms              = USBVISION_NORMS,
-	.current_norm         = V4L2_STD_PAL
+	.tvnorms        = USBVISION_NORMS,
+	.current_norm   = V4L2_STD_PAL
 };
 
 
-// Radio template
+/* Radio template */
 static const struct v4l2_file_operations usbvision_radio_fops = {
 	.owner             = THIS_MODULE,
 	.open		= usbvision_radio_open,
 	.release	= usbvision_radio_close,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops usbvision_radio_ioctl_ops = {
@@ -1323,9 +1279,9 @@ static const struct v4l2_ioctl_ops usbvision_radio_ioctl_ops = {
 
 static struct video_device usbvision_radio_template = {
 	.fops		= &usbvision_radio_fops,
-	.name           = "usbvision-radio",
+	.name		= "usbvision-radio",
 	.release	= video_device_release,
-	.ioctl_ops 	= &usbvision_radio_ioctl_ops,
+	.ioctl_ops	= &usbvision_radio_ioctl_ops,
 
 	.tvnorms              = USBVISION_NORMS,
 	.current_norm         = V4L2_STD_PAL
@@ -1346,80 +1302,70 @@ static struct video_device *usbvision_vdev_init(struct usb_usbvision *usbvision,
 	}
 
 	vdev = video_device_alloc();
-	if (NULL == vdev) {
+	if (NULL == vdev)
 		return NULL;
-	}
 	*vdev = *vdev_template;
+	vdev->lock = &usbvision->v4l2_lock;
 	vdev->v4l2_dev = &usbvision->v4l2_dev;
 	snprintf(vdev->name, sizeof(vdev->name), "%s", name);
 	video_set_drvdata(vdev, usbvision);
 	return vdev;
 }
 
-// unregister video4linux devices
+/* unregister video4linux devices */
 static void usbvision_unregister_video(struct usb_usbvision *usbvision)
 {
-	// Radio Device:
+	/* Radio Device: */
 	if (usbvision->rdev) {
 		PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
 		       video_device_node_name(usbvision->rdev));
-		if (video_is_registered(usbvision->rdev)) {
+		if (video_is_registered(usbvision->rdev))
 			video_unregister_device(usbvision->rdev);
-		} else {
+		else
 			video_device_release(usbvision->rdev);
-		}
 		usbvision->rdev = NULL;
 	}
 
-	// Video Device:
+	/* Video Device: */
 	if (usbvision->vdev) {
 		PDEBUG(DBG_PROBE, "unregister %s [v4l2]",
 		       video_device_node_name(usbvision->vdev));
-		if (video_is_registered(usbvision->vdev)) {
+		if (video_is_registered(usbvision->vdev))
 			video_unregister_device(usbvision->vdev);
-		} else {
+		else
 			video_device_release(usbvision->vdev);
-		}
 		usbvision->vdev = NULL;
 	}
 }
 
-// register video4linux devices
+/* register video4linux devices */
 static int __devinit usbvision_register_video(struct usb_usbvision *usbvision)
 {
-	// Video Device:
+	/* Video Device: */
 	usbvision->vdev = usbvision_vdev_init(usbvision,
 					      &usbvision_video_template,
 					      "USBVision Video");
-	if (usbvision->vdev == NULL) {
+	if (usbvision->vdev == NULL)
 		goto err_exit;
-	}
-	if (video_register_device(usbvision->vdev,
-				  VFL_TYPE_GRABBER,
-				  video_nr)<0) {
+	if (video_register_device(usbvision->vdev, VFL_TYPE_GRABBER, video_nr) < 0)
 		goto err_exit;
-	}
 	printk(KERN_INFO "USBVision[%d]: registered USBVision Video device %s [v4l2]\n",
 	       usbvision->nr, video_device_node_name(usbvision->vdev));
 
-	// Radio Device:
-	if (usbvision_device_data[usbvision->DevModel].Radio) {
-		// usbvision has radio
+	/* Radio Device: */
+	if (usbvision_device_data[usbvision->dev_model].radio) {
+		/* usbvision has radio */
 		usbvision->rdev = usbvision_vdev_init(usbvision,
 						      &usbvision_radio_template,
 						      "USBVision Radio");
-		if (usbvision->rdev == NULL) {
+		if (usbvision->rdev == NULL)
 			goto err_exit;
-		}
-		if (video_register_device(usbvision->rdev,
-					  VFL_TYPE_RADIO,
-					  radio_nr)<0) {
+		if (video_register_device(usbvision->rdev, VFL_TYPE_RADIO, radio_nr) < 0)
 			goto err_exit;
-		}
 		printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device %s [v4l2]\n",
 		       usbvision->nr, video_device_node_name(usbvision->rdev));
 	}
-	// all done
+	/* all done */
 	return 0;
 
  err_exit:
@@ -1452,15 +1398,15 @@ static struct usb_usbvision *usbvision_alloc(struct usb_device *dev,
 	if (v4l2_device_register(&intf->dev, &usbvision->v4l2_dev))
 		goto err_free;
 
-	mutex_init(&usbvision->lock);	/* available */
+	mutex_init(&usbvision->v4l2_lock);
 
-	// prepare control urb for control messages during interrupts
-	usbvision->ctrlUrb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
-	if (usbvision->ctrlUrb == NULL)
+	/* prepare control urb for control messages during interrupts */
+	usbvision->ctrl_urb = usb_alloc_urb(USBVISION_URB_FRAMES, GFP_KERNEL);
+	if (usbvision->ctrl_urb == NULL)
 		goto err_unreg;
-	init_waitqueue_head(&usbvision->ctrlUrb_wq);
+	init_waitqueue_head(&usbvision->ctrl_urb_wq);
 
-	usbvision_init_powerOffTimer(usbvision);
+	usbvision_init_power_off_timer(usbvision);
 
 	return usbvision;
 
@@ -1482,20 +1428,14 @@ static void usbvision_release(struct usb_usbvision *usbvision)
 {
 	PDEBUG(DBG_PROBE, "");
 
-	mutex_lock(&usbvision->lock);
-
-	usbvision_reset_powerOffTimer(usbvision);
+	usbvision_reset_power_off_timer(usbvision);
 
 	usbvision->initialized = 0;
 
-	mutex_unlock(&usbvision->lock);
-
 	usbvision_remove_sysfs(usbvision->vdev);
 	usbvision_unregister_video(usbvision);
 
-	if (usbvision->ctrlUrb) {
-		usb_free_urb(usbvision->ctrlUrb);
-	}
+	usb_free_urb(usbvision->ctrl_urb);
 
 	v4l2_device_unregister(&usbvision->v4l2_dev);
 	kfree(usbvision);
@@ -1513,25 +1453,25 @@ static void usbvision_configure_video(struct usb_usbvision *usbvision)
 	if (usbvision == NULL)
 		return;
 
-	model = usbvision->DevModel;
-	usbvision->palette = usbvision_v4l2_format[2]; // V4L2_PIX_FMT_RGB24;
+	model = usbvision->dev_model;
+	usbvision->palette = usbvision_v4l2_format[2]; /* V4L2_PIX_FMT_RGB24; */
 
-	if (usbvision_device_data[usbvision->DevModel].Vin_Reg2_override) {
-		usbvision->Vin_Reg2_Preset =
-			usbvision_device_data[usbvision->DevModel].Vin_Reg2;
+	if (usbvision_device_data[usbvision->dev_model].vin_reg2_override) {
+		usbvision->vin_reg2_preset =
+			usbvision_device_data[usbvision->dev_model].vin_reg2;
 	} else {
-		usbvision->Vin_Reg2_Preset = 0;
+		usbvision->vin_reg2_preset = 0;
 	}
 
-	usbvision->tvnormId = usbvision_device_data[model].VideoNorm;
+	usbvision->tvnorm_id = usbvision_device_data[model].video_norm;
 
-	usbvision->video_inputs = usbvision_device_data[model].VideoChannels;
+	usbvision->video_inputs = usbvision_device_data[model].video_channels;
 	usbvision->ctl_input = 0;
 
 	/* This should be here to make i2c clients to be able to register */
 	/* first switch off audio */
 	usbvision_audio_off(usbvision);
-	if (!PowerOnAtOpen) {
+	if (!power_on_at_open) {
 		/* and then power up the noisy tuner */
 		usbvision_power_on(usbvision);
 		usbvision_i2c_register(usbvision);
@@ -1554,25 +1494,24 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 	const struct usb_host_interface *interface;
 	struct usb_usbvision *usbvision = NULL;
 	const struct usb_endpoint_descriptor *endpoint;
-	int model,i;
+	int model, i;
 
 	PDEBUG(DBG_PROBE, "VID=%#04x, PID=%#04x, ifnum=%u",
 				dev->descriptor.idVendor,
 				dev->descriptor.idProduct, ifnum);
 
 	model = devid->driver_info;
-	if ( (model<0) || (model>=usbvision_device_data_size) ) {
-		PDEBUG(DBG_PROBE, "model out of bounds %d",model);
+	if (model < 0 || model >= usbvision_device_data_size) {
+		PDEBUG(DBG_PROBE, "model out of bounds %d", model);
 		return -ENODEV;
 	}
 	printk(KERN_INFO "%s: %s found\n", __func__,
-				usbvision_device_data[model].ModelString);
+				usbvision_device_data[model].model_string);
 
-	if (usbvision_device_data[model].Interface >= 0) {
-		interface = &dev->actconfig->interface[usbvision_device_data[model].Interface]->altsetting[0];
-	} else {
+	if (usbvision_device_data[model].interface >= 0)
+		interface = &dev->actconfig->interface[usbvision_device_data[model].interface]->altsetting[0];
+	else
 		interface = &dev->actconfig->interface[ifnum]->altsetting[0];
-	}
 	endpoint = &interface->endpoint[1].desc;
 	if (!usb_endpoint_xfer_isoc(endpoint)) {
 		dev_err(&intf->dev, "%s: interface %d. has non-ISO endpoint!\n",
@@ -1593,59 +1532,52 @@ static int __devinit usbvision_probe(struct usb_interface *intf,
 		return -ENOMEM;
 	}
 
-	if (dev->descriptor.bNumConfigurations > 1) {
-		usbvision->bridgeType = BRIDGE_NT1004;
-	} else if (model == DAZZLE_DVC_90_REV_1_SECAM) {
-		usbvision->bridgeType = BRIDGE_NT1005;
-	} else {
-		usbvision->bridgeType = BRIDGE_NT1003;
-	}
-	PDEBUG(DBG_PROBE, "bridgeType %d", usbvision->bridgeType);
-
-	mutex_lock(&usbvision->lock);
+	if (dev->descriptor.bNumConfigurations > 1)
+		usbvision->bridge_type = BRIDGE_NT1004;
+	else if (model == DAZZLE_DVC_90_REV_1_SECAM)
+		usbvision->bridge_type = BRIDGE_NT1005;
+	else
+		usbvision->bridge_type = BRIDGE_NT1003;
+	PDEBUG(DBG_PROBE, "bridge_type %d", usbvision->bridge_type);
 
 	/* compute alternate max packet sizes */
 	uif = dev->actconfig->interface[0];
 
-	usbvision->num_alt=uif->num_altsetting;
-	PDEBUG(DBG_PROBE, "Alternate settings: %i",usbvision->num_alt);
-	usbvision->alt_max_pkt_size = kmalloc(32*
-					      usbvision->num_alt,GFP_KERNEL);
+	usbvision->num_alt = uif->num_altsetting;
+	PDEBUG(DBG_PROBE, "Alternate settings: %i", usbvision->num_alt);
+	usbvision->alt_max_pkt_size = kmalloc(32 * usbvision->num_alt, GFP_KERNEL);
 	if (usbvision->alt_max_pkt_size == NULL) {
 		dev_err(&intf->dev, "usbvision: out of memory!\n");
-		mutex_unlock(&usbvision->lock);
 		return -ENOMEM;
 	}
 
-	for (i = 0; i < usbvision->num_alt ; i++) {
+	for (i = 0; i < usbvision->num_alt; i++) {
 		u16 tmp = le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
 				      wMaxPacketSize);
 		usbvision->alt_max_pkt_size[i] =
 			(tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
-		PDEBUG(DBG_PROBE, "Alternate setting %i, max size= %i",i,
+		PDEBUG(DBG_PROBE, "Alternate setting %i, max size= %i", i,
 		       usbvision->alt_max_pkt_size[i]);
 	}
 
 
 	usbvision->nr = usbvision_nr++;
 
-	usbvision->have_tuner = usbvision_device_data[model].Tuner;
-	if (usbvision->have_tuner) {
-		usbvision->tuner_type = usbvision_device_data[model].TunerType;
-	}
+	usbvision->have_tuner = usbvision_device_data[model].tuner;
+	if (usbvision->have_tuner)
+		usbvision->tuner_type = usbvision_device_data[model].tuner_type;
 
-	usbvision->DevModel = model;
+	usbvision->dev_model = model;
 	usbvision->remove_pending = 0;
 	usbvision->iface = ifnum;
-	usbvision->ifaceAlt = 0;
+	usbvision->iface_alt = 0;
 	usbvision->video_endp = endpoint->bEndpointAddress;
-	usbvision->isocPacketSize = 0;
+	usbvision->isoc_packet_size = 0;
 	usbvision->usb_bandwidth = 0;
 	usbvision->user = 0;
-	usbvision->streaming = Stream_Off;
+	usbvision->streaming = stream_off;
 	usbvision_configure_video(usbvision);
 	usbvision_register_video(usbvision);
-	mutex_unlock(&usbvision->lock);
 
 	usbvision_create_sysfs(usbvision->vdev);
 
@@ -1673,9 +1605,9 @@ static void __devexit usbvision_disconnect(struct usb_interface *intf)
 		return;
 	}
 
-	mutex_lock(&usbvision->lock);
+	mutex_lock(&usbvision->v4l2_lock);
 
-	// At this time we ask to cancel outstanding URBs
+	/* At this time we ask to cancel outstanding URBs */
 	usbvision_stop_isoc(usbvision);
 
 	v4l2_device_disconnect(&usbvision->v4l2_dev);
@@ -1684,12 +1616,12 @@ static void __devexit usbvision_disconnect(struct usb_interface *intf)
 		usbvision_i2c_unregister(usbvision);
 		usbvision_power_off(usbvision);
 	}
-	usbvision->remove_pending = 1;	// Now all ISO data will be ignored
+	usbvision->remove_pending = 1;	/* Now all ISO data will be ignored */
 
 	usb_put_dev(usbvision->dev);
-	usbvision->dev = NULL;	// USB device is no more
+	usbvision->dev = NULL;	/* USB device is no more */
 
-	mutex_unlock(&usbvision->lock);
+	mutex_unlock(&usbvision->v4l2_lock);
 
 	if (usbvision->user) {
 		printk(KERN_INFO "%s: In use, disconnect pending\n",
@@ -1718,7 +1650,7 @@ static struct usb_driver usbvision_driver = {
  */
 static int __init usbvision_init(void)
 {
-	int errCode;
+	int err_code;
 
 	PDEBUG(DBG_PROBE, "");
 
@@ -1727,27 +1659,27 @@ static int __init usbvision_init(void)
 	PDEBUG(DBG_MMAP, "MMAP    debugging is enabled [video]");
 
 	/* disable planar mode support unless compression enabled */
-	if (isocMode != ISOC_MODE_COMPRESS ) {
-		// FIXME : not the right way to set supported flag
-		usbvision_v4l2_format[6].supported = 0; // V4L2_PIX_FMT_YVU420
-		usbvision_v4l2_format[7].supported = 0; // V4L2_PIX_FMT_YUV422P
+	if (isoc_mode != ISOC_MODE_COMPRESS) {
+		/* FIXME : not the right way to set supported flag */
+		usbvision_v4l2_format[6].supported = 0; /* V4L2_PIX_FMT_YVU420 */
+		usbvision_v4l2_format[7].supported = 0; /* V4L2_PIX_FMT_YUV422P */
 	}
 
-	errCode = usb_register(&usbvision_driver);
+	err_code = usb_register(&usbvision_driver);
 
-	if (errCode == 0) {
+	if (err_code == 0) {
 		printk(KERN_INFO DRIVER_DESC " : " USBVISION_VERSION_STRING "\n");
 		PDEBUG(DBG_PROBE, "success");
 	}
-	return errCode;
+	return err_code;
 }
 
 static void __exit usbvision_exit(void)
 {
- PDEBUG(DBG_PROBE, "");
+	PDEBUG(DBG_PROBE, "");
 
- usb_deregister(&usbvision_driver);
- PDEBUG(DBG_PROBE, "success");
+	usb_deregister(&usbvision_driver);
+	PDEBUG(DBG_PROBE, "success");
 }
 
 module_init(usbvision_init);
diff --git a/drivers/media/video/usbvision/usbvision.h b/drivers/media/video/usbvision/usbvision.h
index cc4e96c8cd6..8074787fd1a 100644
--- a/drivers/media/video/usbvision/usbvision.h
+++ b/drivers/media/video/usbvision/usbvision.h
@@ -132,15 +132,15 @@
 #define MAX_BYTES_PER_PIXEL		4
 
 #define MIN_FRAME_WIDTH			64
-#define MAX_USB_WIDTH			320  //384
-#define MAX_FRAME_WIDTH			320  //384			/*streching sometimes causes crashes*/
+#define MAX_USB_WIDTH			320  /* 384 */
+#define MAX_FRAME_WIDTH			320  /* 384 */			/* streching sometimes causes crashes*/
 
 #define MIN_FRAME_HEIGHT		48
-#define MAX_USB_HEIGHT			240  //288
-#define MAX_FRAME_HEIGHT		240  //288			/*Streching sometimes causes crashes*/
+#define MAX_USB_HEIGHT			240  /* 288 */
+#define MAX_FRAME_HEIGHT		240  /* 288 */			/* Streching sometimes causes crashes*/
 
-#define MAX_FRAME_SIZE     		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)
-#define USBVISION_CLIPMASK_SIZE		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) //bytesize of clipmask
+#define MAX_FRAME_SIZE			(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)
+#define USBVISION_CLIPMASK_SIZE		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) /* bytesize of clipmask */
 
 #define USBVISION_URB_FRAMES		32
 
@@ -148,7 +148,7 @@
 #define USBVISION_NUMFRAMES		3  /* Maximum number of frames an application can get */
 #define USBVISION_NUMSBUF		2 /* Dimensioning the USB S buffering */
 
-#define USBVISION_POWEROFF_TIME		3 * (HZ)		// 3 seconds
+#define USBVISION_POWEROFF_TIME		(3 * HZ)		/* 3 seconds */
 
 
 #define FRAMERATE_MIN	0
@@ -161,7 +161,8 @@ enum {
 };
 
 /* This macro restricts an int variable to an inclusive range */
-#define RESTRICT_TO_RANGE(v,mi,ma) { if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
+#define RESTRICT_TO_RANGE(v, mi, ma) \
+	{ if ((v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }
 
 /*
  * We use macros to do YUV -> RGB conversion because this is
@@ -183,18 +184,18 @@ enum {
  * Make sure the output values are within [0..255] range.
  */
 #define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))
-#define YUV_TO_RGB_BY_THE_BOOK(my,mu,mv,mr,mg,mb) { \
-    int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
-    mm_y = (my) - 16;  \
-    mm_u = (mu) - 128; \
-    mm_v = (mv) - 128; \
-    mm_yc= mm_y * 76284; \
-    mm_b = (mm_yc		+ 132252*mm_v	) >> 16; \
-    mm_g = (mm_yc -  53281*mm_u -  25625*mm_v	) >> 16; \
-    mm_r = (mm_yc + 104595*mm_u			) >> 16; \
-    mb = LIMIT_RGB(mm_b); \
-    mg = LIMIT_RGB(mm_g); \
-    mr = LIMIT_RGB(mm_r); \
+#define YUV_TO_RGB_BY_THE_BOOK(my, mu, mv, mr, mg, mb) { \
+	int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
+	mm_y = (my) - 16; \
+	mm_u = (mu) - 128; \
+	mm_v = (mv) - 128; \
+	mm_yc = mm_y * 76284; \
+	mm_b = (mm_yc + 132252 * mm_v) >> 16; \
+	mm_g = (mm_yc - 53281 * mm_u - 25625 * mm_v) >> 16; \
+	mm_r = (mm_yc + 104595 * mm_u) >> 16; \
+	mb = LIMIT_RGB(mm_b); \
+	mg = LIMIT_RGB(mm_g); \
+	mr = LIMIT_RGB(mm_r); \
 }
 
 /* Debugging aid */
@@ -202,7 +203,7 @@ enum {
 	wait_queue_head_t wq; \
 	init_waitqueue_head(&wq); \
 	printk(KERN_INFO "Say: %s\n", what); \
-	interruptible_sleep_on_timeout (&wq, HZ*3); \
+	interruptible_sleep_on_timeout(&wq, HZ * 3); \
 }
 
 /*
@@ -223,39 +224,39 @@ enum {
 /* ----------------------------------------------------------------- */
 /* usbvision video structures                                        */
 /* ----------------------------------------------------------------- */
-enum ScanState {
-	ScanState_Scanning,	/* Scanning for header */
-	ScanState_Lines		/* Parsing lines */
+enum scan_state {
+	scan_state_scanning,	/* Scanning for header */
+	scan_state_lines	/* Parsing lines */
 };
 
 /* Completion states of the data parser */
-enum ParseState {
-	ParseState_Continue,	/* Just parse next item */
-	ParseState_NextFrame,	/* Frame done, send it to V4L */
-	ParseState_Out,		/* Not enough data for frame */
-	ParseState_EndParse	/* End parsing */
+enum parse_state {
+	parse_state_continue,	/* Just parse next item */
+	parse_state_next_frame,	/* Frame done, send it to V4L */
+	parse_state_out,	/* Not enough data for frame */
+	parse_state_end_parse	/* End parsing */
 };
 
-enum FrameState {
-	FrameState_Unused,	/* Unused (no MCAPTURE) */
-	FrameState_Ready,	/* Ready to start grabbing */
-	FrameState_Grabbing,	/* In the process of being grabbed into */
-	FrameState_Done,	/* Finished grabbing, but not been synced yet */
-	FrameState_DoneHold,	/* Are syncing or reading */
-	FrameState_Error,	/* Something bad happened while processing */
+enum frame_state {
+	frame_state_unused,	/* Unused (no MCAPTURE) */
+	frame_state_ready,	/* Ready to start grabbing */
+	frame_state_grabbing,	/* In the process of being grabbed into */
+	frame_state_done,	/* Finished grabbing, but not been synced yet */
+	frame_state_done_hold,	/* Are syncing or reading */
+	frame_state_error,	/* Something bad happened while processing */
 };
 
 /* stream states */
-enum StreamState {
-	Stream_Off,		/* Driver streaming is completely OFF */
-	Stream_Idle,		/* Driver streaming is ready to be put ON by the application */
-	Stream_Interrupt,	/* Driver streaming must be interrupted */
-	Stream_On,		/* Driver streaming is put ON by the application */
+enum stream_state {
+	stream_off,		/* Driver streaming is completely OFF */
+	stream_idle,		/* Driver streaming is ready to be put ON by the application */
+	stream_interrupt,	/* Driver streaming must be interrupted */
+	stream_on,		/* Driver streaming is put ON by the application */
 };
 
-enum IsocState {
-	IsocState_InFrame,	/* Isoc packet is member of frame */
-	IsocState_NoFrame,	/* Isoc packet is not member of any frame */
+enum isoc_state {
+	isoc_state_in_frame,	/* Isoc packet is member of frame */
+	isoc_state_no_frame,	/* Isoc packet is not member of any frame */
 };
 
 struct usb_device;
@@ -265,8 +266,8 @@ struct usbvision_sbuf {
 	struct urb *urb;
 };
 
-#define USBVISION_MAGIC_1      			0x55
-#define USBVISION_MAGIC_2      			0xAA
+#define USBVISION_MAGIC_1			0x55
+#define USBVISION_MAGIC_2			0xAA
 #define USBVISION_HEADER_LENGTH			0x0c
 #define USBVISION_SAA7111_ADDR			0x48
 #define USBVISION_SAA7113_ADDR			0x4a
@@ -286,23 +287,23 @@ struct usbvision_v4l2_format_st {
 struct usbvision_frame_header {
 	unsigned char magic_1;				/* 0 magic */
 	unsigned char magic_2;				/* 1  magic */
-	unsigned char headerLength;			/* 2 */
-	unsigned char frameNum;				/* 3 */
-	unsigned char framePhase;			/* 4 */
-	unsigned char frameLatency;			/* 5 */
-	unsigned char dataFormat;			/* 6 */
-	unsigned char formatParam;			/* 7 */
-	unsigned char frameWidthLo;			/* 8 */
-	unsigned char frameWidthHi;			/* 9 */
-	unsigned char frameHeightLo;			/* 10 */
-	unsigned char frameHeightHi;			/* 11 */
-	__u16 frameWidth;				/* 8 - 9 after endian correction*/
-	__u16 frameHeight;				/* 10 - 11 after endian correction*/
+	unsigned char header_length;			/* 2 */
+	unsigned char frame_num;			/* 3 */
+	unsigned char frame_phase;			/* 4 */
+	unsigned char frame_latency;			/* 5 */
+	unsigned char data_format;			/* 6 */
+	unsigned char format_param;			/* 7 */
+	unsigned char frame_width_lo;			/* 8 */
+	unsigned char frame_width_hi;			/* 9 */
+	unsigned char frame_height_lo;			/* 10 */
+	unsigned char frame_height_hi;			/* 11 */
+	__u16 frame_width;				/* 8 - 9 after endian correction*/
+	__u16 frame_height;				/* 10 - 11 after endian correction*/
 };
 
 struct usbvision_frame {
 	char *data;					/* Frame buffer */
-	struct usbvision_frame_header isocHeader;	/* Header from stream */
+	struct usbvision_frame_header isoc_header;	/* Header from stream */
 
 	int width;					/* Width application is expecting */
 	int height;					/* Height */
@@ -322,7 +323,7 @@ struct usbvision_frame {
 	struct usbvision_v4l2_format_st v4l2_format;	/* format the user needs*/
 	int v4l2_linesize;				/* bytes for one videoline*/
 	struct timeval timestamp;
-	int sequence;					// How many video frames we send to user
+	int sequence;					/* How many video frames we send to user */
 };
 
 #define CODEC_SAA7113	7113
@@ -332,24 +333,24 @@ struct usbvision_frame {
 #define BRIDGE_NT1005   1005
 
 struct usbvision_device_data_st {
-	__u64 VideoNorm;
-	const char *ModelString;
-	int Interface; /* to handle special interface number like BELKIN and Hauppauge WinTV-USB II */
-	__u16 Codec;
-	unsigned VideoChannels:3;
-	unsigned AudioChannels:2;
-	unsigned Radio:1;
+	__u64 video_norm;
+	const char *model_string;
+	int interface; /* to handle special interface number like BELKIN and Hauppauge WinTV-USB II */
+	__u16 codec;
+	unsigned video_channels:3;
+	unsigned audio_channels:2;
+	unsigned radio:1;
 	unsigned vbi:1;
-	unsigned Tuner:1;
-	unsigned Vin_Reg1_override:1;	/* Override default value with */
-	unsigned Vin_Reg2_override:1;   /* Vin_Reg1, Vin_Reg2, etc. */
-	unsigned Dvi_yuv_override:1;
-	__u8 Vin_Reg1;
-	__u8 Vin_Reg2;
-	__u8 Dvi_yuv;
-	__u8 TunerType;
-	__s16 X_Offset;
-	__s16 Y_Offset;
+	unsigned tuner:1;
+	unsigned vin_reg1_override:1;	/* Override default value with */
+	unsigned vin_reg2_override:1;   /* vin_reg1, vin_reg2, etc. */
+	unsigned dvi_yuv_override:1;
+	__u8 vin_reg1;
+	__u8 vin_reg2;
+	__u8 dvi_yuv;
+	__u8 tuner_type;
+	__s16 x_offset;
+	__s16 y_offset;
 };
 
 /* Declared on usbvision-cards.c */
@@ -358,50 +359,50 @@ extern struct usb_device_id usbvision_table[];
 
 struct usb_usbvision {
 	struct v4l2_device v4l2_dev;
-	struct video_device *vdev;         				/* Video Device */
-	struct video_device *rdev;               			/* Radio Device */
+	struct video_device *vdev;					/* Video Device */
+	struct video_device *rdev;					/* Radio Device */
 
 	/* i2c Declaration Section*/
 	struct i2c_adapter i2c_adap;
 	int registered_i2c;
 
-	struct urb *ctrlUrb;
-	unsigned char ctrlUrbBuffer[8];
-	int ctrlUrbBusy;
-	struct usb_ctrlrequest ctrlUrbSetup;
-	wait_queue_head_t ctrlUrb_wq;					// Processes waiting
+	struct urb *ctrl_urb;
+	unsigned char ctrl_urb_buffer[8];
+	int ctrl_urb_busy;
+	struct usb_ctrlrequest ctrl_urb_setup;
+	wait_queue_head_t ctrl_urb_wq;					/* Processes waiting */
 
 	/* configuration part */
 	int have_tuner;
 	int tuner_type;
-	int bridgeType;							// NT1003, NT1004, NT1005
+	int bridge_type;						/* NT1003, NT1004, NT1005 */
 	int radio;
-	int video_inputs;						// # of inputs
+	int video_inputs;						/* # of inputs */
 	unsigned long freq;
-	int AudioMute;
-	int AudioChannel;
-	int isocMode;							// format of video data for the usb isoc-transfer
-	unsigned int nr;						// Number of the device
+	int audio_mute;
+	int audio_channel;
+	int isoc_mode;							/* format of video data for the usb isoc-transfer */
+	unsigned int nr;						/* Number of the device */
 
 	/* Device structure */
 	struct usb_device *dev;
 	/* usb transfer */
 	int num_alt;		/* Number of alternative settings */
-	unsigned int *alt_max_pkt_size;	/* array of wMaxPacketSize */
+	unsigned int *alt_max_pkt_size;	/* array of max_packet_size */
 	unsigned char iface;						/* Video interface number */
-	unsigned char ifaceAlt;			/* Alt settings */
-	unsigned char Vin_Reg2_Preset;
-	struct mutex               lock;
-	struct timer_list powerOffTimer;
-	struct work_struct powerOffWork;
+	unsigned char iface_alt;					/* Alt settings */
+	unsigned char vin_reg2_preset;
+	struct mutex v4l2_lock;
+	struct timer_list power_off_timer;
+	struct work_struct power_off_work;
 	int power;							/* is the device powered on? */
 	int user;							/* user count for exclusive use */
 	int initialized;						/* Had we already sent init sequence? */
-	int DevModel;							/* What type of USBVISION device we got? */
-	enum StreamState streaming;					/* Are we streaming Isochronous? */
+	int dev_model;							/* What type of USBVISION device we got? */
+	enum stream_state streaming;					/* Are we streaming Isochronous? */
 	int last_error;							/* What calamity struck us? */
 	int curwidth;							/* width of the frame the device is currently set to*/
-	int curheight;      						/* height of the frame the device is currently set to*/
+	int curheight;							/* height of the frame the device is currently set to*/
 	int stretch_width;						/* stretch-factor for frame width (from usb to screen)*/
 	int stretch_height;						/* stretch-factor for frame height (from usb to screen)*/
 	char *fbuf;							/* Videodev buffer area for mmap*/
@@ -411,10 +412,10 @@ struct usb_usbvision {
 	struct list_head inqueue, outqueue;                             /* queued frame list and ready to dequeue frame list */
 	wait_queue_head_t wait_frame;					/* Processes waiting */
 	wait_queue_head_t wait_stream;					/* Processes waiting */
-	struct usbvision_frame *curFrame;				// pointer to current frame, set by usbvision_find_header
-	struct usbvision_frame frame[USBVISION_NUMFRAMES];		// frame buffer
-	int num_frames;							// number of frames allocated
-	struct usbvision_sbuf sbuf[USBVISION_NUMSBUF];			// S buffering
+	struct usbvision_frame *cur_frame;				/* pointer to current frame, set by usbvision_find_header */
+	struct usbvision_frame frame[USBVISION_NUMFRAMES];		/* frame buffer */
+	int num_frames;							/* number of frames allocated */
+	struct usbvision_sbuf sbuf[USBVISION_NUMSBUF];			/* S buffering */
 	volatile int remove_pending;					/* If set then about to exit */
 
 	/* Scratch space from the Isochronous Pipe.*/
@@ -424,43 +425,43 @@ struct usb_usbvision {
 	int scratch_headermarker[USBVISION_NUM_HEADERMARKER];
 	int scratch_headermarker_read_ptr;
 	int scratch_headermarker_write_ptr;
-	enum IsocState isocstate;
+	enum isoc_state isocstate;
 	struct usbvision_v4l2_format_st palette;
 
 	struct v4l2_capability vcap;					/* Video capabilities */
 	unsigned int ctl_input;						/* selected input */
-	v4l2_std_id tvnormId;						/* selected tv norm */
+	v4l2_std_id tvnorm_id;						/* selected tv norm */
 	unsigned char video_endp;					/* 0x82 for USBVISION devices based */
 
-	// Decompression stuff:
-	unsigned char *IntraFrameBuffer;				/* Buffer for reference frame */
-	int BlockPos; 							//for test only
-	int requestIntra;						// 0 = normal; 1 = intra frame is requested;
-	int lastIsocFrameNum;						// check for lost isoc frames
-	int isocPacketSize;						// need to calculate usedBandwidth
-	int usedBandwidth;						// used bandwidth 0-100%, need to set comprLevel
-	int comprLevel;							// How strong (100) or weak (0) is compression
-	int lastComprLevel;						// How strong (100) or weak (0) was compression
+	/* Decompression stuff: */
+	unsigned char *intra_frame_buffer;				/* Buffer for reference frame */
+	int block_pos;							/* for test only */
+	int request_intra;						/* 0 = normal; 1 = intra frame is requested; */
+	int last_isoc_frame_num;					/* check for lost isoc frames */
+	int isoc_packet_size;						/* need to calculate used_bandwidth */
+	int used_bandwidth;						/* used bandwidth 0-100%, need to set compr_level */
+	int compr_level;						/* How strong (100) or weak (0) is compression */
+	int last_compr_level;						/* How strong (100) or weak (0) was compression */
 	int usb_bandwidth;						/* Mbit/s */
 
 	/* Statistics that can be overlayed on the screen */
-	unsigned long isocUrbCount;			// How many URBs we received so far
+	unsigned long isoc_urb_count;			/* How many URBs we received so far */
 	unsigned long urb_length;			/* Length of last URB */
-	unsigned long isocDataCount;			/* How many bytes we received */
+	unsigned long isoc_data_count;			/* How many bytes we received */
 	unsigned long header_count;			/* How many frame headers we found */
 	unsigned long scratch_ovf_count;		/* How many times we overflowed scratch */
-	unsigned long isocSkipCount;			/* How many empty ISO packets received */
-	unsigned long isocErrCount;			/* How many bad ISO packets received */
-	unsigned long isocPacketCount;			// How many packets we totally got
-	unsigned long timeInIrq;			// How long do we need for interrupt
-	int isocMeasureBandwidthCount;
-	int frame_num;					// How many video frames we send to user
-	int maxStripLen;				// How big is the biggest strip
-	int comprBlockPos;
-	int stripLenErrors;				// How many times was BlockPos greater than StripLen
-	int stripMagicErrors;
-	int stripLineNumberErrors;
-	int ComprBlockTypes[4];
+	unsigned long isoc_skip_count;			/* How many empty ISO packets received */
+	unsigned long isoc_err_count;			/* How many bad ISO packets received */
+	unsigned long isoc_packet_count;		/* How many packets we totally got */
+	unsigned long time_in_irq;			/* How long do we need for interrupt */
+	int isoc_measure_bandwidth_count;
+	int frame_num;					/* How many video frames we send to user */
+	int max_strip_len;				/* How big is the biggest strip */
+	int comprblock_pos;
+	int strip_len_errors;				/* How many times was block_pos greater than strip_len */
+	int strip_magic_errors;
+	int strip_line_number_errors;
+	int compr_block_types[4];
 };
 
 static inline struct usb_usbvision *to_usbvision(struct v4l2_device *v4l2_dev)
@@ -494,13 +495,13 @@ void usbvision_scratch_free(struct usb_usbvision *usbvision);
 int usbvision_decompress_alloc(struct usb_usbvision *usbvision);
 void usbvision_decompress_free(struct usb_usbvision *usbvision);
 
-int usbvision_setup(struct usb_usbvision *usbvision,int format);
+int usbvision_setup(struct usb_usbvision *usbvision, int format);
 int usbvision_init_isoc(struct usb_usbvision *usbvision);
 int usbvision_restart_isoc(struct usb_usbvision *usbvision);
 void usbvision_stop_isoc(struct usb_usbvision *usbvision);
 int usbvision_set_alternate(struct usb_usbvision *dev);
 
-int usbvision_set_audio(struct usb_usbvision *usbvision, int AudioChannel);
+int usbvision_set_audio(struct usb_usbvision *usbvision, int audio_channel);
 int usbvision_audio_off(struct usb_usbvision *usbvision);
 
 int usbvision_begin_streaming(struct usb_usbvision *usbvision);
@@ -511,9 +512,9 @@ int usbvision_muxsel(struct usb_usbvision *usbvision, int channel);
 int usbvision_set_input(struct usb_usbvision *usbvision);
 int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height);
 
-void usbvision_init_powerOffTimer(struct usb_usbvision *usbvision);
-void usbvision_set_powerOffTimer(struct usb_usbvision *usbvision);
-void usbvision_reset_powerOffTimer(struct usb_usbvision *usbvision);
+void usbvision_init_power_off_timer(struct usb_usbvision *usbvision);
+void usbvision_set_power_off_timer(struct usb_usbvision *usbvision);
+void usbvision_reset_power_off_timer(struct usb_usbvision *usbvision);
 int usbvision_power_off(struct usb_usbvision *usbvision);
 int usbvision_power_on(struct usb_usbvision *usbvision);
 
diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c
index f169f773667..59f8a9ad379 100644
--- a/drivers/media/video/uvc/uvc_ctrl.c
+++ b/drivers/media/video/uvc/uvc_ctrl.c
@@ -785,7 +785,7 @@ static void __uvc_find_control(struct uvc_entity *entity, __u32 v4l2_id,
 	}
 }
 
-struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
+static struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
 	__u32 v4l2_id, struct uvc_control_mapping **mapping)
 {
 	struct uvc_control *ctrl = NULL;
@@ -944,6 +944,52 @@ done:
 	return ret;
 }
 
+/*
+ * Mapping V4L2 controls to UVC controls can be straighforward if done well.
+ * Most of the UVC controls exist in V4L2, and can be mapped directly. Some
+ * must be grouped (for instance the Red Balance, Blue Balance and Do White
+ * Balance V4L2 controls use the White Balance Component UVC control) or
+ * otherwise translated. The approach we take here is to use a translation
+ * table for the controls that can be mapped directly, and handle the others
+ * manually.
+ */
+int uvc_query_v4l2_menu(struct uvc_video_chain *chain,
+	struct v4l2_querymenu *query_menu)
+{
+	struct uvc_menu_info *menu_info;
+	struct uvc_control_mapping *mapping;
+	struct uvc_control *ctrl;
+	u32 index = query_menu->index;
+	u32 id = query_menu->id;
+	int ret;
+
+	memset(query_menu, 0, sizeof(*query_menu));
+	query_menu->id = id;
+	query_menu->index = index;
+
+	ret = mutex_lock_interruptible(&chain->ctrl_mutex);
+	if (ret < 0)
+		return -ERESTARTSYS;
+
+	ctrl = uvc_find_control(chain, query_menu->id, &mapping);
+	if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if (query_menu->index >= mapping->menu_count) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	menu_info = &mapping->menu_info[query_menu->index];
+	strlcpy(query_menu->name, menu_info->name, sizeof query_menu->name);
+
+done:
+	mutex_unlock(&chain->ctrl_mutex);
+	return ret;
+}
+
 
 /* --------------------------------------------------------------------------
  * Control transactions
diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c
index ed6d5449741..f14581bd707 100644
--- a/drivers/media/video/uvc/uvc_queue.c
+++ b/drivers/media/video/uvc/uvc_queue.c
@@ -90,6 +90,39 @@ void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type,
 }
 
 /*
+ * Free the video buffers.
+ *
+ * This function must be called with the queue lock held.
+ */
+static int __uvc_free_buffers(struct uvc_video_queue *queue)
+{
+	unsigned int i;
+
+	for (i = 0; i < queue->count; ++i) {
+		if (queue->buffer[i].vma_use_count != 0)
+			return -EBUSY;
+	}
+
+	if (queue->count) {
+		vfree(queue->mem);
+		queue->count = 0;
+	}
+
+	return 0;
+}
+
+int uvc_free_buffers(struct uvc_video_queue *queue)
+{
+	int ret;
+
+	mutex_lock(&queue->mutex);
+	ret = __uvc_free_buffers(queue);
+	mutex_unlock(&queue->mutex);
+
+	return ret;
+}
+
+/*
  * Allocate the video buffers.
  *
  * Pages are reserved to make sure they will not be swapped, as they will be
@@ -110,7 +143,7 @@ int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers,
 
 	mutex_lock(&queue->mutex);
 
-	if ((ret = uvc_free_buffers(queue)) < 0)
+	if ((ret = __uvc_free_buffers(queue)) < 0)
 		goto done;
 
 	/* Bail out if no buffers should be allocated. */
@@ -152,28 +185,6 @@ done:
 }
 
 /*
- * Free the video buffers.
- *
- * This function must be called with the queue lock held.
- */
-int uvc_free_buffers(struct uvc_video_queue *queue)
-{
-	unsigned int i;
-
-	for (i = 0; i < queue->count; ++i) {
-		if (queue->buffer[i].vma_use_count != 0)
-			return -EBUSY;
-	}
-
-	if (queue->count) {
-		vfree(queue->mem);
-		queue->count = 0;
-	}
-
-	return 0;
-}
-
-/*
  * Check if buffers have been allocated.
  */
 int uvc_queue_allocated(struct uvc_video_queue *queue)
@@ -369,6 +380,82 @@ done:
 }
 
 /*
+ * VMA operations.
+ */
+static void uvc_vm_open(struct vm_area_struct *vma)
+{
+	struct uvc_buffer *buffer = vma->vm_private_data;
+	buffer->vma_use_count++;
+}
+
+static void uvc_vm_close(struct vm_area_struct *vma)
+{
+	struct uvc_buffer *buffer = vma->vm_private_data;
+	buffer->vma_use_count--;
+}
+
+static const struct vm_operations_struct uvc_vm_ops = {
+	.open		= uvc_vm_open,
+	.close		= uvc_vm_close,
+};
+
+/*
+ * Memory-map a video buffer.
+ *
+ * This function implements video buffers memory mapping and is intended to be
+ * used by the device mmap handler.
+ */
+int uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
+{
+	struct uvc_buffer *uninitialized_var(buffer);
+	struct page *page;
+	unsigned long addr, start, size;
+	unsigned int i;
+	int ret = 0;
+
+	start = vma->vm_start;
+	size = vma->vm_end - vma->vm_start;
+
+	mutex_lock(&queue->mutex);
+
+	for (i = 0; i < queue->count; ++i) {
+		buffer = &queue->buffer[i];
+		if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
+			break;
+	}
+
+	if (i == queue->count || size != queue->buf_size) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	/*
+	 * VM_IO marks the area as being an mmaped region for I/O to a
+	 * device. It also prevents the region from being core dumped.
+	 */
+	vma->vm_flags |= VM_IO;
+
+	addr = (unsigned long)queue->mem + buffer->buf.m.offset;
+	while (size > 0) {
+		page = vmalloc_to_page((void *)addr);
+		if ((ret = vm_insert_page(vma, start, page)) < 0)
+			goto done;
+
+		start += PAGE_SIZE;
+		addr += PAGE_SIZE;
+		size -= PAGE_SIZE;
+	}
+
+	vma->vm_ops = &uvc_vm_ops;
+	vma->vm_private_data = buffer;
+	uvc_vm_open(vma);
+
+done:
+	mutex_unlock(&queue->mutex);
+	return ret;
+}
+
+/*
  * Poll the video queue.
  *
  * This function implements video queue polling and is intended to be used by
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index 6d15de9b520..9005a8d9d5f 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -101,40 +101,6 @@ done:
  */
 
 /*
- * Mapping V4L2 controls to UVC controls can be straighforward if done well.
- * Most of the UVC controls exist in V4L2, and can be mapped directly. Some
- * must be grouped (for instance the Red Balance, Blue Balance and Do White
- * Balance V4L2 controls use the White Balance Component UVC control) or
- * otherwise translated. The approach we take here is to use a translation
- * table for the controls that can be mapped directly, and handle the others
- * manually.
- */
-static int uvc_v4l2_query_menu(struct uvc_video_chain *chain,
-	struct v4l2_querymenu *query_menu)
-{
-	struct uvc_menu_info *menu_info;
-	struct uvc_control_mapping *mapping;
-	struct uvc_control *ctrl;
-	u32 index = query_menu->index;
-	u32 id = query_menu->id;
-
-	ctrl = uvc_find_control(chain, query_menu->id, &mapping);
-	if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU)
-		return -EINVAL;
-
-	if (query_menu->index >= mapping->menu_count)
-		return -EINVAL;
-
-	memset(query_menu, 0, sizeof(*query_menu));
-	query_menu->id = id;
-	query_menu->index = index;
-
-	menu_info = &mapping->menu_info[query_menu->index];
-	strlcpy(query_menu->name, menu_info->name, sizeof query_menu->name);
-	return 0;
-}
-
-/*
  * Find the frame interval closest to the requested frame interval for the
  * given frame format and size. This should be done by the device as part of
  * the Video Probe and Commit negotiation, but some hardware don't implement
@@ -260,12 +226,14 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream,
 	 * developers test their webcams with the Linux driver as well as with
 	 * the Windows driver).
 	 */
+	mutex_lock(&stream->mutex);
 	if (stream->dev->quirks & UVC_QUIRK_PROBE_EXTRAFIELDS)
 		probe->dwMaxVideoFrameSize =
 			stream->ctrl.dwMaxVideoFrameSize;
 
 	/* Probe the device. */
 	ret = uvc_probe_video(stream, probe);
+	mutex_unlock(&stream->mutex);
 	if (ret < 0)
 		goto done;
 
@@ -289,14 +257,21 @@ done:
 static int uvc_v4l2_get_format(struct uvc_streaming *stream,
 	struct v4l2_format *fmt)
 {
-	struct uvc_format *format = stream->cur_format;
-	struct uvc_frame *frame = stream->cur_frame;
+	struct uvc_format *format;
+	struct uvc_frame *frame;
+	int ret = 0;
 
 	if (fmt->type != stream->type)
 		return -EINVAL;
 
-	if (format == NULL || frame == NULL)
-		return -EINVAL;
+	mutex_lock(&stream->mutex);
+	format = stream->cur_format;
+	frame = stream->cur_frame;
+
+	if (format == NULL || frame == NULL) {
+		ret = -EINVAL;
+		goto done;
+	}
 
 	fmt->fmt.pix.pixelformat = format->fcc;
 	fmt->fmt.pix.width = frame->wWidth;
@@ -307,7 +282,9 @@ static int uvc_v4l2_get_format(struct uvc_streaming *stream,
 	fmt->fmt.pix.colorspace = format->colorspace;
 	fmt->fmt.pix.priv = 0;
 
-	return 0;
+done:
+	mutex_unlock(&stream->mutex);
+	return ret;
 }
 
 static int uvc_v4l2_set_format(struct uvc_streaming *stream,
@@ -321,18 +298,24 @@ static int uvc_v4l2_set_format(struct uvc_streaming *stream,
 	if (fmt->type != stream->type)
 		return -EINVAL;
 
-	if (uvc_queue_allocated(&stream->queue))
-		return -EBUSY;
-
 	ret = uvc_v4l2_try_format(stream, fmt, &probe, &format, &frame);
 	if (ret < 0)
 		return ret;
 
+	mutex_lock(&stream->mutex);
+
+	if (uvc_queue_allocated(&stream->queue)) {
+		ret = -EBUSY;
+		goto done;
+	}
+
 	memcpy(&stream->ctrl, &probe, sizeof probe);
 	stream->cur_format = format;
 	stream->cur_frame = frame;
 
-	return 0;
+done:
+	mutex_unlock(&stream->mutex);
+	return ret;
 }
 
 static int uvc_v4l2_get_streamparm(struct uvc_streaming *stream,
@@ -343,7 +326,10 @@ static int uvc_v4l2_get_streamparm(struct uvc_streaming *stream,
 	if (parm->type != stream->type)
 		return -EINVAL;
 
+	mutex_lock(&stream->mutex);
 	numerator = stream->ctrl.dwFrameInterval;
+	mutex_unlock(&stream->mutex);
+
 	denominator = 10000000;
 	uvc_simplify_fraction(&numerator, &denominator, 8, 333);
 
@@ -370,7 +356,6 @@ static int uvc_v4l2_get_streamparm(struct uvc_streaming *stream,
 static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream,
 		struct v4l2_streamparm *parm)
 {
-	struct uvc_frame *frame = stream->cur_frame;
 	struct uvc_streaming_control probe;
 	struct v4l2_fract timeperframe;
 	uint32_t interval;
@@ -379,28 +364,36 @@ static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream,
 	if (parm->type != stream->type)
 		return -EINVAL;
 
-	if (uvc_queue_streaming(&stream->queue))
-		return -EBUSY;
-
 	if (parm->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
 		timeperframe = parm->parm.capture.timeperframe;
 	else
 		timeperframe = parm->parm.output.timeperframe;
 
-	memcpy(&probe, &stream->ctrl, sizeof probe);
 	interval = uvc_fraction_to_interval(timeperframe.numerator,
 		timeperframe.denominator);
-
 	uvc_trace(UVC_TRACE_FORMAT, "Setting frame interval to %u/%u (%u).\n",
 		timeperframe.numerator, timeperframe.denominator, interval);
-	probe.dwFrameInterval = uvc_try_frame_interval(frame, interval);
+
+	mutex_lock(&stream->mutex);
+
+	if (uvc_queue_streaming(&stream->queue)) {
+		mutex_unlock(&stream->mutex);
+		return -EBUSY;
+	}
+
+	memcpy(&probe, &stream->ctrl, sizeof probe);
+	probe.dwFrameInterval =
+		uvc_try_frame_interval(stream->cur_frame, interval);
 
 	/* Probe the device with the new settings. */
 	ret = uvc_probe_video(stream, &probe);
-	if (ret < 0)
+	if (ret < 0) {
+		mutex_unlock(&stream->mutex);
 		return ret;
+	}
 
 	memcpy(&stream->ctrl, &probe, sizeof probe);
+	mutex_unlock(&stream->mutex);
 
 	/* Return the actual frame period. */
 	timeperframe.numerator = probe.dwFrameInterval;
@@ -528,11 +521,9 @@ static int uvc_v4l2_release(struct file *file)
 	if (uvc_has_privileges(handle)) {
 		uvc_video_enable(stream, 0);
 
-		mutex_lock(&stream->queue.mutex);
 		if (uvc_free_buffers(&stream->queue) < 0)
 			uvc_printk(KERN_ERR, "uvc_v4l2_release: Unable to "
 					"free buffers.\n");
-		mutex_unlock(&stream->queue.mutex);
 	}
 
 	/* Release the file handle. */
@@ -624,7 +615,7 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	}
 
 	case VIDIOC_QUERYMENU:
-		return uvc_v4l2_query_menu(chain, arg);
+		return uvc_query_v4l2_menu(chain, arg);
 
 	case VIDIOC_G_EXT_CTRLS:
 	{
@@ -905,15 +896,17 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	case VIDIOC_CROPCAP:
 	{
 		struct v4l2_cropcap *ccap = arg;
-		struct uvc_frame *frame = stream->cur_frame;
 
 		if (ccap->type != stream->type)
 			return -EINVAL;
 
 		ccap->bounds.left = 0;
 		ccap->bounds.top = 0;
-		ccap->bounds.width = frame->wWidth;
-		ccap->bounds.height = frame->wHeight;
+
+		mutex_lock(&stream->mutex);
+		ccap->bounds.width = stream->cur_frame->wWidth;
+		ccap->bounds.height = stream->cur_frame->wHeight;
+		mutex_unlock(&stream->mutex);
 
 		ccap->defrect = ccap->bounds;
 
@@ -930,8 +923,6 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 	case VIDIOC_REQBUFS:
 	{
 		struct v4l2_requestbuffers *rb = arg;
-		unsigned int bufsize =
-			stream->ctrl.dwMaxVideoFrameSize;
 
 		if (rb->type != stream->type ||
 		    rb->memory != V4L2_MEMORY_MMAP)
@@ -940,7 +931,10 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		if ((ret = uvc_acquire_privileges(handle)) < 0)
 			return ret;
 
-		ret = uvc_alloc_buffers(&stream->queue, rb->count, bufsize);
+		mutex_lock(&stream->mutex);
+		ret = uvc_alloc_buffers(&stream->queue, rb->count,
+					stream->ctrl.dwMaxVideoFrameSize);
+		mutex_unlock(&stream->mutex);
 		if (ret < 0)
 			return ret;
 
@@ -988,7 +982,9 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		if (!uvc_has_privileges(handle))
 			return -EBUSY;
 
+		mutex_lock(&stream->mutex);
 		ret = uvc_video_enable(stream, 1);
+		mutex_unlock(&stream->mutex);
 		if (ret < 0)
 			return ret;
 		break;
@@ -1039,11 +1035,8 @@ static long uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg)
 		return uvc_xu_ctrl_query(chain, arg, 1);
 
 	default:
-		if ((ret = v4l_compat_translate_ioctl(file, cmd, arg,
-			uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD)
-			uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n",
-				  cmd);
-		return ret;
+		uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n", cmd);
+		return -EINVAL;
 	}
 
 	return ret;
@@ -1068,79 +1061,14 @@ static ssize_t uvc_v4l2_read(struct file *file, char __user *data,
 	return -EINVAL;
 }
 
-/*
- * VMA operations.
- */
-static void uvc_vm_open(struct vm_area_struct *vma)
-{
-	struct uvc_buffer *buffer = vma->vm_private_data;
-	buffer->vma_use_count++;
-}
-
-static void uvc_vm_close(struct vm_area_struct *vma)
-{
-	struct uvc_buffer *buffer = vma->vm_private_data;
-	buffer->vma_use_count--;
-}
-
-static const struct vm_operations_struct uvc_vm_ops = {
-	.open		= uvc_vm_open,
-	.close		= uvc_vm_close,
-};
-
 static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
 {
 	struct uvc_fh *handle = file->private_data;
 	struct uvc_streaming *stream = handle->stream;
-	struct uvc_video_queue *queue = &stream->queue;
-	struct uvc_buffer *uninitialized_var(buffer);
-	struct page *page;
-	unsigned long addr, start, size;
-	unsigned int i;
-	int ret = 0;
 
 	uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_mmap\n");
 
-	start = vma->vm_start;
-	size = vma->vm_end - vma->vm_start;
-
-	mutex_lock(&queue->mutex);
-
-	for (i = 0; i < queue->count; ++i) {
-		buffer = &queue->buffer[i];
-		if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
-			break;
-	}
-
-	if (i == queue->count || size != queue->buf_size) {
-		ret = -EINVAL;
-		goto done;
-	}
-
-	/*
-	 * VM_IO marks the area as being an mmaped region for I/O to a
-	 * device. It also prevents the region from being core dumped.
-	 */
-	vma->vm_flags |= VM_IO;
-
-	addr = (unsigned long)queue->mem + buffer->buf.m.offset;
-	while (size > 0) {
-		page = vmalloc_to_page((void *)addr);
-		if ((ret = vm_insert_page(vma, start, page)) < 0)
-			goto done;
-
-		start += PAGE_SIZE;
-		addr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	vma->vm_ops = &uvc_vm_ops;
-	vma->vm_private_data = buffer;
-	uvc_vm_open(vma);
-
-done:
-	mutex_unlock(&queue->mutex);
-	return ret;
+	return uvc_queue_mmap(&stream->queue, vma);
 }
 
 static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait)
@@ -1157,7 +1085,7 @@ const struct v4l2_file_operations uvc_fops = {
 	.owner		= THIS_MODULE,
 	.open		= uvc_v4l2_open,
 	.release	= uvc_v4l2_release,
-	.ioctl		= uvc_v4l2_ioctl,
+	.unlocked_ioctl	= uvc_v4l2_ioctl,
 	.read		= uvc_v4l2_read,
 	.mmap		= uvc_v4l2_mmap,
 	.poll		= uvc_v4l2_poll,
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 5555f010283..5673d673504 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -293,8 +293,6 @@ int uvc_probe_video(struct uvc_streaming *stream,
 	unsigned int i;
 	int ret;
 
-	mutex_lock(&stream->mutex);
-
 	/* Perform probing. The device should adjust the requested values
 	 * according to its capabilities. However, some devices, namely the
 	 * first generation UVC Logitech webcams, don't implement the Video
@@ -346,7 +344,6 @@ int uvc_probe_video(struct uvc_streaming *stream,
 	}
 
 done:
-	mutex_unlock(&stream->mutex);
 	return ret;
 }
 
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index d97cf6d6a4f..45f01e7e13d 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -436,7 +436,9 @@ struct uvc_streaming {
 	struct uvc_streaming_control ctrl;
 	struct uvc_format *cur_format;
 	struct uvc_frame *cur_frame;
-
+	/* Protect access to ctrl, cur_format, cur_frame and hardware video
+	 * probe control.
+	 */
 	struct mutex mutex;
 
 	unsigned int frozen : 1;
@@ -574,6 +576,8 @@ extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable);
 extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect);
 extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
 		struct uvc_buffer *buf);
+extern int uvc_queue_mmap(struct uvc_video_queue *queue,
+		struct vm_area_struct *vma);
 extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
 		struct file *file, poll_table *wait);
 extern int uvc_queue_allocated(struct uvc_video_queue *queue);
@@ -606,10 +610,10 @@ extern int uvc_status_suspend(struct uvc_device *dev);
 extern int uvc_status_resume(struct uvc_device *dev);
 
 /* Controls */
-extern struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
-		__u32 v4l2_id, struct uvc_control_mapping **mapping);
 extern int uvc_query_v4l2_ctrl(struct uvc_video_chain *chain,
 		struct v4l2_queryctrl *v4l2_ctrl);
+extern int uvc_query_v4l2_menu(struct uvc_video_chain *chain,
+		struct v4l2_querymenu *query_menu);
 
 extern int uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
 		const struct uvc_control_mapping *mapping);
diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c
deleted file mode 100644
index d4ac751036a..00000000000
--- a/drivers/media/video/v4l1-compat.c
+++ /dev/null
@@ -1,1277 +0,0 @@
-/*
- *
- *	Video for Linux Two
- *	Backward Compatibility Layer
- *
- *	Support subroutines for providing V4L2 drivers with backward
- *	compatibility with applications using the old API.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- * Author:	Bill Dirks <bill@thedirks.org>
- *		et al.
- *
- */
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-
-static unsigned int debug;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "enable debug messages");
-MODULE_AUTHOR("Bill Dirks");
-MODULE_DESCRIPTION("v4l(1) compatibility layer for v4l2 drivers.");
-MODULE_LICENSE("GPL");
-
-#define dprintk(fmt, arg...) \
-	do { \
-		if (debug) \
-			printk(KERN_DEBUG "v4l1-compat: " fmt , ## arg);\
-	} while (0)
-
-/*
- *	I O C T L   T R A N S L A T I O N
- *
- *	From here on down is the code for translating the numerous
- *	ioctl commands from the old API to the new API.
- */
-
-static int
-get_v4l_control(struct file             *file,
-		int			cid,
-		v4l2_kioctl             drv)
-{
-	struct v4l2_queryctrl	qctrl2;
-	struct v4l2_control	ctrl2;
-	int			err;
-
-	qctrl2.id = cid;
-	err = drv(file, VIDIOC_QUERYCTRL, &qctrl2);
-	if (err < 0)
-		dprintk("VIDIOC_QUERYCTRL: %d\n", err);
-	if (err == 0 && !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) {
-		ctrl2.id = qctrl2.id;
-		err = drv(file, VIDIOC_G_CTRL, &ctrl2);
-		if (err < 0) {
-			dprintk("VIDIOC_G_CTRL: %d\n", err);
-			return 0;
-		}
-		return DIV_ROUND_CLOSEST((ctrl2.value-qctrl2.minimum) * 65535,
-					 qctrl2.maximum - qctrl2.minimum);
-	}
-	return 0;
-}
-
-static int
-set_v4l_control(struct file             *file,
-		int			cid,
-		int			value,
-		v4l2_kioctl             drv)
-{
-	struct v4l2_queryctrl	qctrl2;
-	struct v4l2_control	ctrl2;
-	int			err;
-
-	qctrl2.id = cid;
-	err = drv(file, VIDIOC_QUERYCTRL, &qctrl2);
-	if (err < 0)
-		dprintk("VIDIOC_QUERYCTRL: %d\n", err);
-	if (err == 0 &&
-	    !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED) &&
-	    !(qctrl2.flags & V4L2_CTRL_FLAG_GRABBED)) {
-		if (value < 0)
-			value = 0;
-		if (value > 65535)
-			value = 65535;
-		if (value && qctrl2.type == V4L2_CTRL_TYPE_BOOLEAN)
-			value = 65535;
-		ctrl2.id = qctrl2.id;
-		ctrl2.value =
-			(value * (qctrl2.maximum - qctrl2.minimum)
-			 + 32767)
-			/ 65535;
-		ctrl2.value += qctrl2.minimum;
-		err = drv(file, VIDIOC_S_CTRL, &ctrl2);
-		if (err < 0)
-			dprintk("VIDIOC_S_CTRL: %d\n", err);
-	}
-	return 0;
-}
-
-/* ----------------------------------------------------------------- */
-
-static const unsigned int palette2pixelformat[] = {
-	[VIDEO_PALETTE_GREY]    = V4L2_PIX_FMT_GREY,
-	[VIDEO_PALETTE_RGB555]  = V4L2_PIX_FMT_RGB555,
-	[VIDEO_PALETTE_RGB565]  = V4L2_PIX_FMT_RGB565,
-	[VIDEO_PALETTE_RGB24]   = V4L2_PIX_FMT_BGR24,
-	[VIDEO_PALETTE_RGB32]   = V4L2_PIX_FMT_BGR32,
-	/* yuv packed pixel */
-	[VIDEO_PALETTE_YUYV]    = V4L2_PIX_FMT_YUYV,
-	[VIDEO_PALETTE_YUV422]  = V4L2_PIX_FMT_YUYV,
-	[VIDEO_PALETTE_UYVY]    = V4L2_PIX_FMT_UYVY,
-	/* yuv planar */
-	[VIDEO_PALETTE_YUV410P] = V4L2_PIX_FMT_YUV410,
-	[VIDEO_PALETTE_YUV420]  = V4L2_PIX_FMT_YUV420,
-	[VIDEO_PALETTE_YUV420P] = V4L2_PIX_FMT_YUV420,
-	[VIDEO_PALETTE_YUV411P] = V4L2_PIX_FMT_YUV411P,
-	[VIDEO_PALETTE_YUV422P] = V4L2_PIX_FMT_YUV422P,
-};
-
-static unsigned int __pure
-palette_to_pixelformat(unsigned int palette)
-{
-	if (palette < ARRAY_SIZE(palette2pixelformat))
-		return palette2pixelformat[palette];
-	else
-		return 0;
-}
-
-static unsigned int __attribute_const__
-pixelformat_to_palette(unsigned int pixelformat)
-{
-	int	palette = 0;
-	switch (pixelformat) {
-	case V4L2_PIX_FMT_GREY:
-		palette = VIDEO_PALETTE_GREY;
-		break;
-	case V4L2_PIX_FMT_RGB555:
-		palette = VIDEO_PALETTE_RGB555;
-		break;
-	case V4L2_PIX_FMT_RGB565:
-		palette = VIDEO_PALETTE_RGB565;
-		break;
-	case V4L2_PIX_FMT_BGR24:
-		palette = VIDEO_PALETTE_RGB24;
-		break;
-	case V4L2_PIX_FMT_BGR32:
-		palette = VIDEO_PALETTE_RGB32;
-		break;
-	/* yuv packed pixel */
-	case V4L2_PIX_FMT_YUYV:
-		palette = VIDEO_PALETTE_YUYV;
-		break;
-	case V4L2_PIX_FMT_UYVY:
-		palette = VIDEO_PALETTE_UYVY;
-		break;
-	/* yuv planar */
-	case V4L2_PIX_FMT_YUV410:
-		palette = VIDEO_PALETTE_YUV420;
-		break;
-	case V4L2_PIX_FMT_YUV420:
-		palette = VIDEO_PALETTE_YUV420;
-		break;
-	case V4L2_PIX_FMT_YUV411P:
-		palette = VIDEO_PALETTE_YUV411P;
-		break;
-	case V4L2_PIX_FMT_YUV422P:
-		palette = VIDEO_PALETTE_YUV422P;
-		break;
-	}
-	return palette;
-}
-
-/* ----------------------------------------------------------------- */
-
-static int poll_one(struct file *file, struct poll_wqueues *pwq)
-{
-	int retval = 1;
-	poll_table *table;
-
-	poll_initwait(pwq);
-	table = &pwq->pt;
-	for (;;) {
-		int mask;
-		mask = file->f_op->poll(file, table);
-		if (mask & POLLIN)
-			break;
-		table = NULL;
-		if (signal_pending(current)) {
-			retval = -ERESTARTSYS;
-			break;
-		}
-		poll_schedule(pwq, TASK_INTERRUPTIBLE);
-	}
-	poll_freewait(pwq);
-	return retval;
-}
-
-static int count_inputs(
-			struct file *file,
-			v4l2_kioctl drv)
-{
-	struct v4l2_input input2;
-	int i;
-
-	for (i = 0;; i++) {
-		memset(&input2, 0, sizeof(input2));
-		input2.index = i;
-		if (0 != drv(file, VIDIOC_ENUMINPUT, &input2))
-			break;
-	}
-	return i;
-}
-
-static int check_size(
-		struct file *file,
-		v4l2_kioctl drv,
-		int *maxw,
-		int *maxh)
-{
-	struct v4l2_fmtdesc desc2;
-	struct v4l2_format  fmt2;
-
-	memset(&desc2, 0, sizeof(desc2));
-	memset(&fmt2, 0, sizeof(fmt2));
-
-	desc2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	if (0 != drv(file, VIDIOC_ENUM_FMT, &desc2))
-		goto done;
-
-	fmt2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	fmt2.fmt.pix.width       = 10000;
-	fmt2.fmt.pix.height      = 10000;
-	fmt2.fmt.pix.pixelformat = desc2.pixelformat;
-	if (0 != drv(file, VIDIOC_TRY_FMT, &fmt2))
-		goto done;
-
-	*maxw = fmt2.fmt.pix.width;
-	*maxh = fmt2.fmt.pix.height;
-
-done:
-	return 0;
-}
-
-/* ----------------------------------------------------------------- */
-
-static noinline long v4l1_compat_get_capabilities(
-					struct video_capability *cap,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_framebuffer fbuf;
-	struct v4l2_capability *cap2;
-
-	cap2 = kzalloc(sizeof(*cap2), GFP_KERNEL);
-	if (!cap2) {
-		err = -ENOMEM;
-		return err;
-	}
-	memset(cap, 0, sizeof(*cap));
-	memset(&fbuf, 0, sizeof(fbuf));
-
-	err = drv(file, VIDIOC_QUERYCAP, cap2);
-	if (err < 0) {
-		dprintk("VIDIOCGCAP / VIDIOC_QUERYCAP: %ld\n", err);
-		goto done;
-	}
-	if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY) {
-		err = drv(file, VIDIOC_G_FBUF, &fbuf);
-		if (err < 0) {
-			dprintk("VIDIOCGCAP / VIDIOC_G_FBUF: %ld\n", err);
-			memset(&fbuf, 0, sizeof(fbuf));
-		}
-		err = 0;
-	}
-
-	memcpy(cap->name, cap2->card,
-	       min(sizeof(cap->name), sizeof(cap2->card)));
-	cap->name[sizeof(cap->name) - 1] = 0;
-	if (cap2->capabilities & V4L2_CAP_VIDEO_CAPTURE)
-		cap->type |= VID_TYPE_CAPTURE;
-	if (cap2->capabilities & V4L2_CAP_TUNER)
-		cap->type |= VID_TYPE_TUNER;
-	if (cap2->capabilities & V4L2_CAP_VBI_CAPTURE)
-		cap->type |= VID_TYPE_TELETEXT;
-	if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY)
-		cap->type |= VID_TYPE_OVERLAY;
-	if (fbuf.capability & V4L2_FBUF_CAP_LIST_CLIPPING)
-		cap->type |= VID_TYPE_CLIPPING;
-
-	cap->channels  = count_inputs(file, drv);
-	check_size(file, drv,
-		   &cap->maxwidth, &cap->maxheight);
-	cap->audios    =  0; /* FIXME */
-	cap->minwidth  = 48; /* FIXME */
-	cap->minheight = 32; /* FIXME */
-
-done:
-	kfree(cap2);
-	return err;
-}
-
-static noinline long v4l1_compat_get_frame_buffer(
-					struct video_buffer *buffer,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_framebuffer fbuf;
-
-	memset(buffer, 0, sizeof(*buffer));
-	memset(&fbuf, 0, sizeof(fbuf));
-
-	err = drv(file, VIDIOC_G_FBUF, &fbuf);
-	if (err < 0) {
-		dprintk("VIDIOCGFBUF / VIDIOC_G_FBUF: %ld\n", err);
-		goto done;
-	}
-	buffer->base   = fbuf.base;
-	buffer->height = fbuf.fmt.height;
-	buffer->width  = fbuf.fmt.width;
-
-	switch (fbuf.fmt.pixelformat) {
-	case V4L2_PIX_FMT_RGB332:
-		buffer->depth = 8;
-		break;
-	case V4L2_PIX_FMT_RGB555:
-		buffer->depth = 15;
-		break;
-	case V4L2_PIX_FMT_RGB565:
-		buffer->depth = 16;
-		break;
-	case V4L2_PIX_FMT_BGR24:
-		buffer->depth = 24;
-		break;
-	case V4L2_PIX_FMT_BGR32:
-		buffer->depth = 32;
-		break;
-	default:
-		buffer->depth = 0;
-	}
-	if (fbuf.fmt.bytesperline) {
-		buffer->bytesperline = fbuf.fmt.bytesperline;
-		if (!buffer->depth && buffer->width)
-			buffer->depth   = ((fbuf.fmt.bytesperline<<3)
-					  + (buffer->width-1))
-					  / buffer->width;
-	} else {
-		buffer->bytesperline =
-			(buffer->width * buffer->depth + 7) & 7;
-		buffer->bytesperline >>= 3;
-	}
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_set_frame_buffer(
-					struct video_buffer *buffer,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_framebuffer fbuf;
-
-	memset(&fbuf, 0, sizeof(fbuf));
-	fbuf.base       = buffer->base;
-	fbuf.fmt.height = buffer->height;
-	fbuf.fmt.width  = buffer->width;
-	switch (buffer->depth) {
-	case 8:
-		fbuf.fmt.pixelformat = V4L2_PIX_FMT_RGB332;
-		break;
-	case 15:
-		fbuf.fmt.pixelformat = V4L2_PIX_FMT_RGB555;
-		break;
-	case 16:
-		fbuf.fmt.pixelformat = V4L2_PIX_FMT_RGB565;
-		break;
-	case 24:
-		fbuf.fmt.pixelformat = V4L2_PIX_FMT_BGR24;
-		break;
-	case 32:
-		fbuf.fmt.pixelformat = V4L2_PIX_FMT_BGR32;
-		break;
-	}
-	fbuf.fmt.bytesperline = buffer->bytesperline;
-	err = drv(file, VIDIOC_S_FBUF, &fbuf);
-	if (err < 0)
-		dprintk("VIDIOCSFBUF / VIDIOC_S_FBUF: %ld\n", err);
-	return err;
-}
-
-static noinline long v4l1_compat_get_win_cap_dimensions(
-					struct video_window *win,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_format *fmt;
-
-	fmt = kzalloc(sizeof(*fmt), GFP_KERNEL);
-	if (!fmt) {
-		err = -ENOMEM;
-		return err;
-	}
-	memset(win, 0, sizeof(*win));
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_OVERLAY;
-	err = drv(file, VIDIOC_G_FMT, fmt);
-	if (err < 0)
-		dprintk("VIDIOCGWIN / VIDIOC_G_WIN: %ld\n", err);
-	if (err == 0) {
-		win->x         = fmt->fmt.win.w.left;
-		win->y         = fmt->fmt.win.w.top;
-		win->width     = fmt->fmt.win.w.width;
-		win->height    = fmt->fmt.win.w.height;
-		win->chromakey = fmt->fmt.win.chromakey;
-		win->clips     = NULL;
-		win->clipcount = 0;
-		goto done;
-	}
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_G_FMT, fmt);
-	if (err < 0) {
-		dprintk("VIDIOCGWIN / VIDIOC_G_FMT: %ld\n", err);
-		goto done;
-	}
-	win->x         = 0;
-	win->y         = 0;
-	win->width     = fmt->fmt.pix.width;
-	win->height    = fmt->fmt.pix.height;
-	win->chromakey = 0;
-	win->clips     = NULL;
-	win->clipcount = 0;
-done:
-	kfree(fmt);
-	return err;
-}
-
-static noinline long v4l1_compat_set_win_cap_dimensions(
-					struct video_window *win,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err, err1, err2;
-	struct v4l2_format *fmt;
-
-	fmt = kzalloc(sizeof(*fmt), GFP_KERNEL);
-	if (!fmt) {
-		err = -ENOMEM;
-		return err;
-	}
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	drv(file, VIDIOC_STREAMOFF, &fmt->type);
-	err1 = drv(file, VIDIOC_G_FMT, fmt);
-	if (err1 < 0)
-		dprintk("VIDIOCSWIN / VIDIOC_G_FMT: %ld\n", err1);
-	if (err1 == 0) {
-		fmt->fmt.pix.width  = win->width;
-		fmt->fmt.pix.height = win->height;
-		fmt->fmt.pix.field  = V4L2_FIELD_ANY;
-		fmt->fmt.pix.bytesperline = 0;
-		err = drv(file, VIDIOC_S_FMT, fmt);
-		if (err < 0)
-			dprintk("VIDIOCSWIN / VIDIOC_S_FMT #1: %ld\n",
-				err);
-		win->width  = fmt->fmt.pix.width;
-		win->height = fmt->fmt.pix.height;
-	}
-
-	memset(fmt, 0, sizeof(*fmt));
-	fmt->type = V4L2_BUF_TYPE_VIDEO_OVERLAY;
-	fmt->fmt.win.w.left    = win->x;
-	fmt->fmt.win.w.top     = win->y;
-	fmt->fmt.win.w.width   = win->width;
-	fmt->fmt.win.w.height  = win->height;
-	fmt->fmt.win.chromakey = win->chromakey;
-	fmt->fmt.win.clips     = (void __user *)win->clips;
-	fmt->fmt.win.clipcount = win->clipcount;
-	err2 = drv(file, VIDIOC_S_FMT, fmt);
-	if (err2 < 0)
-		dprintk("VIDIOCSWIN / VIDIOC_S_FMT #2: %ld\n", err2);
-
-	if (err1 != 0 && err2 != 0)
-		err = err1;
-	else
-		err = 0;
-	kfree(fmt);
-	return err;
-}
-
-static noinline long v4l1_compat_turn_preview_on_off(
-					int *on,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	enum v4l2_buf_type captype = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-
-	if (0 == *on) {
-		/* dirty hack time.  But v4l1 has no STREAMOFF
-		 * equivalent in the API, and this one at
-		 * least comes close ... */
-		drv(file, VIDIOC_STREAMOFF, &captype);
-	}
-	err = drv(file, VIDIOC_OVERLAY, on);
-	if (err < 0)
-		dprintk("VIDIOCCAPTURE / VIDIOC_PREVIEW: %ld\n", err);
-	return err;
-}
-
-static noinline long v4l1_compat_get_input_info(
-					struct video_channel *chan,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_input	input2;
-	v4l2_std_id    		sid;
-
-	memset(&input2, 0, sizeof(input2));
-	input2.index = chan->channel;
-	err = drv(file, VIDIOC_ENUMINPUT, &input2);
-	if (err < 0) {
-		dprintk("VIDIOCGCHAN / VIDIOC_ENUMINPUT: "
-			"channel=%d err=%ld\n", chan->channel, err);
-		goto done;
-	}
-	chan->channel = input2.index;
-	memcpy(chan->name, input2.name,
-	       min(sizeof(chan->name), sizeof(input2.name)));
-	chan->name[sizeof(chan->name) - 1] = 0;
-	chan->tuners = (input2.type == V4L2_INPUT_TYPE_TUNER) ? 1 : 0;
-	chan->flags = (chan->tuners) ? VIDEO_VC_TUNER : 0;
-	switch (input2.type) {
-	case V4L2_INPUT_TYPE_TUNER:
-		chan->type = VIDEO_TYPE_TV;
-		break;
-	default:
-	case V4L2_INPUT_TYPE_CAMERA:
-		chan->type = VIDEO_TYPE_CAMERA;
-		break;
-	}
-	chan->norm = 0;
-	/* Note: G_STD might not be present for radio receivers,
-	 * so we should ignore any errors. */
-	if (drv(file, VIDIOC_G_STD, &sid) == 0) {
-		if (sid & V4L2_STD_PAL)
-			chan->norm = VIDEO_MODE_PAL;
-		if (sid & V4L2_STD_NTSC)
-			chan->norm = VIDEO_MODE_NTSC;
-		if (sid & V4L2_STD_SECAM)
-			chan->norm = VIDEO_MODE_SECAM;
-		if (sid == V4L2_STD_ALL)
-			chan->norm = VIDEO_MODE_AUTO;
-	}
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_set_input(
-					struct video_channel *chan,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	v4l2_std_id sid = 0;
-
-	err = drv(file, VIDIOC_S_INPUT, &chan->channel);
-	if (err < 0)
-		dprintk("VIDIOCSCHAN / VIDIOC_S_INPUT: %ld\n", err);
-	switch (chan->norm) {
-	case VIDEO_MODE_PAL:
-		sid = V4L2_STD_PAL;
-		break;
-	case VIDEO_MODE_NTSC:
-		sid = V4L2_STD_NTSC;
-		break;
-	case VIDEO_MODE_SECAM:
-		sid = V4L2_STD_SECAM;
-		break;
-	case VIDEO_MODE_AUTO:
-		sid = V4L2_STD_ALL;
-		break;
-	}
-	if (0 != sid) {
-		err = drv(file, VIDIOC_S_STD, &sid);
-		if (err < 0)
-			dprintk("VIDIOCSCHAN / VIDIOC_S_STD: %ld\n", err);
-	}
-	return err;
-}
-
-static noinline long v4l1_compat_get_picture(
-					struct video_picture *pict,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_format *fmt;
-
-	fmt = kzalloc(sizeof(*fmt), GFP_KERNEL);
-	if (!fmt) {
-		err = -ENOMEM;
-		return err;
-	}
-
-	pict->brightness = get_v4l_control(file,
-					   V4L2_CID_BRIGHTNESS, drv);
-	pict->hue = get_v4l_control(file,
-				    V4L2_CID_HUE, drv);
-	pict->contrast = get_v4l_control(file,
-					 V4L2_CID_CONTRAST, drv);
-	pict->colour = get_v4l_control(file,
-				       V4L2_CID_SATURATION, drv);
-	pict->whiteness = get_v4l_control(file,
-					  V4L2_CID_WHITENESS, drv);
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_G_FMT, fmt);
-	if (err < 0) {
-		dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %ld\n", err);
-		goto done;
-	}
-
-	if (fmt->fmt.pix.width)
-	{
-		pict->depth   = ((fmt->fmt.pix.bytesperline << 3)
-				 + (fmt->fmt.pix.width - 1))
-				 / fmt->fmt.pix.width;
-	} else {
-		err = -EINVAL;
-		goto done;
-	}
-
-	pict->palette = pixelformat_to_palette(
-		fmt->fmt.pix.pixelformat);
-done:
-	kfree(fmt);
-	return err;
-}
-
-static noinline long v4l1_compat_set_picture(
-					struct video_picture *pict,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_framebuffer fbuf;
-	int mem_err = 0, ovl_err = 0;
-	struct v4l2_format *fmt;
-
-	fmt = kzalloc(sizeof(*fmt), GFP_KERNEL);
-	if (!fmt) {
-		err = -ENOMEM;
-		return err;
-	}
-	memset(&fbuf, 0, sizeof(fbuf));
-
-	set_v4l_control(file,
-			V4L2_CID_BRIGHTNESS, pict->brightness, drv);
-	set_v4l_control(file,
-			V4L2_CID_HUE, pict->hue, drv);
-	set_v4l_control(file,
-			V4L2_CID_CONTRAST, pict->contrast, drv);
-	set_v4l_control(file,
-			V4L2_CID_SATURATION, pict->colour, drv);
-	set_v4l_control(file,
-			V4L2_CID_WHITENESS, pict->whiteness, drv);
-	/*
-	 * V4L1 uses this ioctl to set both memory capture and overlay
-	 * pixel format, while V4L2 has two different ioctls for this.
-	 * Some cards may not support one or the other, and may support
-	 * different pixel formats for memory vs overlay.
-	 */
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_G_FMT, fmt);
-	/* If VIDIOC_G_FMT failed, then the driver likely doesn't
-	   support memory capture.  Trying to set the memory capture
-	   parameters would be pointless.  */
-	if (err < 0) {
-		dprintk("VIDIOCSPICT / VIDIOC_G_FMT: %ld\n", err);
-		mem_err = -1000;  /* didn't even try */
-	} else if (fmt->fmt.pix.pixelformat !=
-		 palette_to_pixelformat(pict->palette)) {
-		fmt->fmt.pix.pixelformat = palette_to_pixelformat(
-			pict->palette);
-		mem_err = drv(file, VIDIOC_S_FMT, fmt);
-		if (mem_err < 0)
-			dprintk("VIDIOCSPICT / VIDIOC_S_FMT: %d\n",
-				mem_err);
-	}
-
-	err = drv(file, VIDIOC_G_FBUF, &fbuf);
-	/* If VIDIOC_G_FBUF failed, then the driver likely doesn't
-	   support overlay.  Trying to set the overlay parameters
-	   would be quite pointless.  */
-	if (err < 0) {
-		dprintk("VIDIOCSPICT / VIDIOC_G_FBUF: %ld\n", err);
-		ovl_err = -1000;  /* didn't even try */
-	} else if (fbuf.fmt.pixelformat !=
-		 palette_to_pixelformat(pict->palette)) {
-		fbuf.fmt.pixelformat = palette_to_pixelformat(
-			pict->palette);
-		ovl_err = drv(file, VIDIOC_S_FBUF, &fbuf);
-		if (ovl_err < 0)
-			dprintk("VIDIOCSPICT / VIDIOC_S_FBUF: %d\n",
-				ovl_err);
-	}
-	if (ovl_err < 0 && mem_err < 0) {
-		/* ioctl failed, couldn't set either parameter */
-		if (mem_err != -1000)
-			err = mem_err;
-		else if (ovl_err == -EPERM)
-			err = 0;
-		else
-			err = ovl_err;
-	} else
-		err = 0;
-	kfree(fmt);
-	return err;
-}
-
-static noinline long v4l1_compat_get_tuner(
-					struct video_tuner *tun,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	int i;
-	struct v4l2_tuner	tun2;
-	struct v4l2_standard	std2;
-	v4l2_std_id    		sid;
-
-	memset(&tun2, 0, sizeof(tun2));
-	err = drv(file, VIDIOC_G_TUNER, &tun2);
-	if (err < 0) {
-		dprintk("VIDIOCGTUNER / VIDIOC_G_TUNER: %ld\n", err);
-		goto done;
-	}
-	memcpy(tun->name, tun2.name,
-	       min(sizeof(tun->name), sizeof(tun2.name)));
-	tun->name[sizeof(tun->name) - 1] = 0;
-	tun->rangelow = tun2.rangelow;
-	tun->rangehigh = tun2.rangehigh;
-	tun->flags = 0;
-	tun->mode = VIDEO_MODE_AUTO;
-
-	for (i = 0; i < 64; i++) {
-		memset(&std2, 0, sizeof(std2));
-		std2.index = i;
-		if (0 != drv(file, VIDIOC_ENUMSTD, &std2))
-			break;
-		if (std2.id & V4L2_STD_PAL)
-			tun->flags |= VIDEO_TUNER_PAL;
-		if (std2.id & V4L2_STD_NTSC)
-			tun->flags |= VIDEO_TUNER_NTSC;
-		if (std2.id & V4L2_STD_SECAM)
-			tun->flags |= VIDEO_TUNER_SECAM;
-	}
-
-	/* Note: G_STD might not be present for radio receivers,
-	 * so we should ignore any errors. */
-	if (drv(file, VIDIOC_G_STD, &sid) == 0) {
-		if (sid & V4L2_STD_PAL)
-			tun->mode = VIDEO_MODE_PAL;
-		if (sid & V4L2_STD_NTSC)
-			tun->mode = VIDEO_MODE_NTSC;
-		if (sid & V4L2_STD_SECAM)
-			tun->mode = VIDEO_MODE_SECAM;
-	}
-
-	if (tun2.capability & V4L2_TUNER_CAP_LOW)
-		tun->flags |= VIDEO_TUNER_LOW;
-	if (tun2.rxsubchans & V4L2_TUNER_SUB_STEREO)
-		tun->flags |= VIDEO_TUNER_STEREO_ON;
-	tun->signal = tun2.signal;
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_select_tuner(
-					struct video_tuner *tun,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_tuner	t;/*84 bytes on x86_64*/
-	memset(&t, 0, sizeof(t));
-
-	t.index = tun->tuner;
-
-	err = drv(file, VIDIOC_S_TUNER, &t);
-	if (err < 0)
-		dprintk("VIDIOCSTUNER / VIDIOC_S_TUNER: %ld\n", err);
-	return err;
-}
-
-static noinline long v4l1_compat_get_frequency(
-					unsigned long *freq,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_frequency   freq2;
-	memset(&freq2, 0, sizeof(freq2));
-
-	freq2.tuner = 0;
-	err = drv(file, VIDIOC_G_FREQUENCY, &freq2);
-	if (err < 0)
-		dprintk("VIDIOCGFREQ / VIDIOC_G_FREQUENCY: %ld\n", err);
-	if (0 == err)
-		*freq = freq2.frequency;
-	return err;
-}
-
-static noinline long v4l1_compat_set_frequency(
-					unsigned long *freq,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_frequency   freq2;
-	memset(&freq2, 0, sizeof(freq2));
-
-	drv(file, VIDIOC_G_FREQUENCY, &freq2);
-	freq2.frequency = *freq;
-	err = drv(file, VIDIOC_S_FREQUENCY, &freq2);
-	if (err < 0)
-		dprintk("VIDIOCSFREQ / VIDIOC_S_FREQUENCY: %ld\n", err);
-	return err;
-}
-
-static noinline long v4l1_compat_get_audio(
-					struct video_audio *aud,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	int i;
-	struct v4l2_queryctrl	qctrl2;
-	struct v4l2_audio	aud2;
-	struct v4l2_tuner	tun2;
-	memset(&aud2, 0, sizeof(aud2));
-
-	err = drv(file, VIDIOC_G_AUDIO, &aud2);
-	if (err < 0) {
-		dprintk("VIDIOCGAUDIO / VIDIOC_G_AUDIO: %ld\n", err);
-		goto done;
-	}
-	memcpy(aud->name, aud2.name,
-	       min(sizeof(aud->name), sizeof(aud2.name)));
-	aud->name[sizeof(aud->name) - 1] = 0;
-	aud->audio = aud2.index;
-	aud->flags = 0;
-	i = get_v4l_control(file, V4L2_CID_AUDIO_VOLUME, drv);
-	if (i >= 0) {
-		aud->volume = i;
-		aud->flags |= VIDEO_AUDIO_VOLUME;
-	}
-	i = get_v4l_control(file, V4L2_CID_AUDIO_BASS, drv);
-	if (i >= 0) {
-		aud->bass = i;
-		aud->flags |= VIDEO_AUDIO_BASS;
-	}
-	i = get_v4l_control(file, V4L2_CID_AUDIO_TREBLE, drv);
-	if (i >= 0) {
-		aud->treble = i;
-		aud->flags |= VIDEO_AUDIO_TREBLE;
-	}
-	i = get_v4l_control(file, V4L2_CID_AUDIO_BALANCE, drv);
-	if (i >= 0) {
-		aud->balance = i;
-		aud->flags |= VIDEO_AUDIO_BALANCE;
-	}
-	i = get_v4l_control(file, V4L2_CID_AUDIO_MUTE, drv);
-	if (i >= 0) {
-		if (i)
-			aud->flags |= VIDEO_AUDIO_MUTE;
-		aud->flags |= VIDEO_AUDIO_MUTABLE;
-	}
-	aud->step = 1;
-	qctrl2.id = V4L2_CID_AUDIO_VOLUME;
-	if (drv(file, VIDIOC_QUERYCTRL, &qctrl2) == 0 &&
-	    !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED))
-		aud->step = qctrl2.step;
-	aud->mode = 0;
-
-	memset(&tun2, 0, sizeof(tun2));
-	err = drv(file, VIDIOC_G_TUNER, &tun2);
-	if (err < 0) {
-		dprintk("VIDIOCGAUDIO / VIDIOC_G_TUNER: %ld\n", err);
-		err = 0;
-		goto done;
-	}
-
-	if (tun2.rxsubchans & V4L2_TUNER_SUB_LANG2)
-		aud->mode = VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2;
-	else if (tun2.rxsubchans & V4L2_TUNER_SUB_STEREO)
-		aud->mode = VIDEO_SOUND_STEREO;
-	else if (tun2.rxsubchans & V4L2_TUNER_SUB_MONO)
-		aud->mode = VIDEO_SOUND_MONO;
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_set_audio(
-					struct video_audio *aud,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_audio	aud2;
-	struct v4l2_tuner	tun2;
-
-	memset(&aud2, 0, sizeof(aud2));
-	memset(&tun2, 0, sizeof(tun2));
-
-	aud2.index = aud->audio;
-	err = drv(file, VIDIOC_S_AUDIO, &aud2);
-	if (err < 0) {
-		dprintk("VIDIOCSAUDIO / VIDIOC_S_AUDIO: %ld\n", err);
-		goto done;
-	}
-
-	set_v4l_control(file, V4L2_CID_AUDIO_VOLUME,
-			aud->volume, drv);
-	set_v4l_control(file, V4L2_CID_AUDIO_BASS,
-			aud->bass, drv);
-	set_v4l_control(file, V4L2_CID_AUDIO_TREBLE,
-			aud->treble, drv);
-	set_v4l_control(file, V4L2_CID_AUDIO_BALANCE,
-			aud->balance, drv);
-	set_v4l_control(file, V4L2_CID_AUDIO_MUTE,
-			!!(aud->flags & VIDEO_AUDIO_MUTE), drv);
-
-	err = drv(file, VIDIOC_G_TUNER, &tun2);
-	if (err < 0)
-		dprintk("VIDIOCSAUDIO / VIDIOC_G_TUNER: %ld\n", err);
-	if (err == 0) {
-		switch (aud->mode) {
-		default:
-		case VIDEO_SOUND_MONO:
-		case VIDEO_SOUND_LANG1:
-			tun2.audmode = V4L2_TUNER_MODE_MONO;
-			break;
-		case VIDEO_SOUND_STEREO:
-			tun2.audmode = V4L2_TUNER_MODE_STEREO;
-			break;
-		case VIDEO_SOUND_LANG2:
-			tun2.audmode = V4L2_TUNER_MODE_LANG2;
-			break;
-		}
-		err = drv(file, VIDIOC_S_TUNER, &tun2);
-		if (err < 0)
-			dprintk("VIDIOCSAUDIO / VIDIOC_S_TUNER: %ld\n", err);
-	}
-	err = 0;
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_capture_frame(
-					struct video_mmap *mm,
-					struct file *file,
-					v4l2_kioctl drv)
-{
-	long err;
-	enum v4l2_buf_type      captype = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	struct v4l2_buffer	buf;
-	struct v4l2_format	*fmt;
-
-	fmt = kzalloc(sizeof(*fmt), GFP_KERNEL);
-	if (!fmt) {
-		err = -ENOMEM;
-		return err;
-	}
-	memset(&buf, 0, sizeof(buf));
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_G_FMT, fmt);
-	if (err < 0) {
-		dprintk("VIDIOCMCAPTURE / VIDIOC_G_FMT: %ld\n", err);
-		goto done;
-	}
-	if (mm->width   != fmt->fmt.pix.width  ||
-	    mm->height  != fmt->fmt.pix.height ||
-	    palette_to_pixelformat(mm->format) !=
-	    fmt->fmt.pix.pixelformat) {
-		/* New capture format...  */
-		fmt->fmt.pix.width = mm->width;
-		fmt->fmt.pix.height = mm->height;
-		fmt->fmt.pix.pixelformat =
-			palette_to_pixelformat(mm->format);
-		fmt->fmt.pix.field = V4L2_FIELD_ANY;
-		fmt->fmt.pix.bytesperline = 0;
-		err = drv(file, VIDIOC_S_FMT, fmt);
-		if (err < 0) {
-			dprintk("VIDIOCMCAPTURE / VIDIOC_S_FMT: %ld\n", err);
-			goto done;
-		}
-	}
-	buf.index = mm->frame;
-	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_QUERYBUF, &buf);
-	if (err < 0) {
-		dprintk("VIDIOCMCAPTURE / VIDIOC_QUERYBUF: %ld\n", err);
-		goto done;
-	}
-	err = drv(file, VIDIOC_QBUF, &buf);
-	if (err < 0) {
-		dprintk("VIDIOCMCAPTURE / VIDIOC_QBUF: %ld\n", err);
-		goto done;
-	}
-	err = drv(file, VIDIOC_STREAMON, &captype);
-	if (err < 0)
-		dprintk("VIDIOCMCAPTURE / VIDIOC_STREAMON: %ld\n", err);
-done:
-	kfree(fmt);
-	return err;
-}
-
-static noinline long v4l1_compat_sync(
-				int *i,
-				struct file *file,
-				v4l2_kioctl drv)
-{
-	long err;
-	enum v4l2_buf_type captype = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	struct v4l2_buffer buf;
-	struct poll_wqueues *pwq;
-
-	memset(&buf, 0, sizeof(buf));
-	buf.index = *i;
-	buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	err = drv(file, VIDIOC_QUERYBUF, &buf);
-	if (err < 0) {
-		/*  No such buffer */
-		dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %ld\n", err);
-		goto done;
-	}
-	if (!(buf.flags & V4L2_BUF_FLAG_MAPPED)) {
-		/* Buffer is not mapped  */
-		err = -EINVAL;
-		goto done;
-	}
-
-	/* make sure capture actually runs so we don't block forever */
-	err = drv(file, VIDIOC_STREAMON, &captype);
-	if (err < 0) {
-		dprintk("VIDIOCSYNC / VIDIOC_STREAMON: %ld\n", err);
-		goto done;
-	}
-
-	pwq = kmalloc(sizeof(*pwq), GFP_KERNEL);
-	/*  Loop as long as the buffer is queued, but not done  */
-	while ((buf.flags & (V4L2_BUF_FLAG_QUEUED | V4L2_BUF_FLAG_DONE))
-						== V4L2_BUF_FLAG_QUEUED) {
-		err = poll_one(file, pwq);
-		if (err < 0 ||	/* error or sleep was interrupted  */
-		    err == 0)	/* timeout? Shouldn't occur.  */
-			break;
-		err = drv(file, VIDIOC_QUERYBUF, &buf);
-		if (err < 0)
-			dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %ld\n", err);
-	}
-	kfree(pwq);
-	if (!(buf.flags & V4L2_BUF_FLAG_DONE)) /* not done */
-		goto done;
-	do {
-		err = drv(file, VIDIOC_DQBUF, &buf);
-		if (err < 0)
-			dprintk("VIDIOCSYNC / VIDIOC_DQBUF: %ld\n", err);
-	} while (err == 0 && buf.index != *i);
-done:
-	return err;
-}
-
-static noinline long v4l1_compat_get_vbi_format(
-				struct vbi_format *fmt,
-				struct file *file,
-				v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_format *fmt2;
-
-	fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
-	if (!fmt2) {
-		err = -ENOMEM;
-		return err;
-	}
-	fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE;
-
-	err = drv(file, VIDIOC_G_FMT, fmt2);
-	if (err < 0) {
-		dprintk("VIDIOCGVBIFMT / VIDIOC_G_FMT: %ld\n", err);
-		goto done;
-	}
-	if (fmt2->fmt.vbi.sample_format != V4L2_PIX_FMT_GREY) {
-		err = -EINVAL;
-		goto done;
-	}
-	memset(fmt, 0, sizeof(*fmt));
-	fmt->samples_per_line = fmt2->fmt.vbi.samples_per_line;
-	fmt->sampling_rate    = fmt2->fmt.vbi.sampling_rate;
-	fmt->sample_format    = VIDEO_PALETTE_RAW;
-	fmt->start[0]         = fmt2->fmt.vbi.start[0];
-	fmt->count[0]         = fmt2->fmt.vbi.count[0];
-	fmt->start[1]         = fmt2->fmt.vbi.start[1];
-	fmt->count[1]         = fmt2->fmt.vbi.count[1];
-	fmt->flags            = fmt2->fmt.vbi.flags & 0x03;
-done:
-	kfree(fmt2);
-	return err;
-}
-
-static noinline long v4l1_compat_set_vbi_format(
-				struct vbi_format *fmt,
-				struct file *file,
-				v4l2_kioctl drv)
-{
-	long err;
-	struct v4l2_format	*fmt2 = NULL;
-
-	if (VIDEO_PALETTE_RAW != fmt->sample_format) {
-		err = -EINVAL;
-		return err;
-	}
-
-	fmt2 = kzalloc(sizeof(*fmt2), GFP_KERNEL);
-	if (!fmt2) {
-		err = -ENOMEM;
-		return err;
-	}
-	fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE;
-	fmt2->fmt.vbi.samples_per_line = fmt->samples_per_line;
-	fmt2->fmt.vbi.sampling_rate    = fmt->sampling_rate;
-	fmt2->fmt.vbi.sample_format    = V4L2_PIX_FMT_GREY;
-	fmt2->fmt.vbi.start[0]         = fmt->start[0];
-	fmt2->fmt.vbi.count[0]         = fmt->count[0];
-	fmt2->fmt.vbi.start[1]         = fmt->start[1];
-	fmt2->fmt.vbi.count[1]         = fmt->count[1];
-	fmt2->fmt.vbi.flags            = fmt->flags;
-	err = drv(file, VIDIOC_TRY_FMT, fmt2);
-	if (err < 0) {
-		dprintk("VIDIOCSVBIFMT / VIDIOC_TRY_FMT: %ld\n", err);
-		goto done;
-	}
-
-	if (fmt2->fmt.vbi.samples_per_line != fmt->samples_per_line ||
-	    fmt2->fmt.vbi.sampling_rate    != fmt->sampling_rate    ||
-	    fmt2->fmt.vbi.sample_format    != V4L2_PIX_FMT_GREY     ||
-	    fmt2->fmt.vbi.start[0]         != fmt->start[0]         ||
-	    fmt2->fmt.vbi.count[0]         != fmt->count[0]         ||
-	    fmt2->fmt.vbi.start[1]         != fmt->start[1]         ||
-	    fmt2->fmt.vbi.count[1]         != fmt->count[1]         ||
-	    fmt2->fmt.vbi.flags            != fmt->flags) {
-		err = -EINVAL;
-		goto done;
-	}
-	err = drv(file, VIDIOC_S_FMT, fmt2);
-	if (err < 0)
-		dprintk("VIDIOCSVBIFMT / VIDIOC_S_FMT: %ld\n", err);
-done:
-	kfree(fmt2);
-	return err;
-}
-
-/*
- *	This function is exported.
- */
-long
-v4l_compat_translate_ioctl(struct file		*file,
-			   int			cmd,
-			   void			*arg,
-			   v4l2_kioctl          drv)
-{
-	long err;
-
-	switch (cmd) {
-	case VIDIOCGCAP:	/* capability */
-		err = v4l1_compat_get_capabilities(arg, file, drv);
-		break;
-	case VIDIOCGFBUF: /*  get frame buffer  */
-		err = v4l1_compat_get_frame_buffer(arg, file, drv);
-		break;
-	case VIDIOCSFBUF: /*  set frame buffer  */
-		err = v4l1_compat_set_frame_buffer(arg, file, drv);
-		break;
-	case VIDIOCGWIN: /*  get window or capture dimensions  */
-		err = v4l1_compat_get_win_cap_dimensions(arg, file, drv);
-		break;
-	case VIDIOCSWIN: /*  set window and/or capture dimensions  */
-		err = v4l1_compat_set_win_cap_dimensions(arg, file, drv);
-		break;
-	case VIDIOCCAPTURE: /*  turn on/off preview  */
-		err = v4l1_compat_turn_preview_on_off(arg, file, drv);
-		break;
-	case VIDIOCGCHAN: /*  get input information  */
-		err = v4l1_compat_get_input_info(arg, file, drv);
-		break;
-	case VIDIOCSCHAN: /*  set input  */
-		err = v4l1_compat_set_input(arg, file, drv);
-		break;
-	case VIDIOCGPICT: /*  get tone controls & partial capture format  */
-		err = v4l1_compat_get_picture(arg, file, drv);
-		break;
-	case VIDIOCSPICT: /*  set tone controls & partial capture format  */
-		err = v4l1_compat_set_picture(arg, file, drv);
-		break;
-	case VIDIOCGTUNER: /*  get tuner information  */
-		err = v4l1_compat_get_tuner(arg, file, drv);
-		break;
-	case VIDIOCSTUNER: /*  select a tuner input  */
-		err = v4l1_compat_select_tuner(arg, file, drv);
-		break;
-	case VIDIOCGFREQ: /*  get frequency  */
-		err = v4l1_compat_get_frequency(arg, file, drv);
-		break;
-	case VIDIOCSFREQ: /*  set frequency  */
-		err = v4l1_compat_set_frequency(arg, file, drv);
-		break;
-	case VIDIOCGAUDIO: /*  get audio properties/controls  */
-		err = v4l1_compat_get_audio(arg, file, drv);
-		break;
-	case VIDIOCSAUDIO: /*  set audio controls  */
-		err = v4l1_compat_set_audio(arg, file, drv);
-		break;
-	case VIDIOCMCAPTURE: /*  capture a frame  */
-		err = v4l1_compat_capture_frame(arg, file, drv);
-		break;
-	case VIDIOCSYNC: /*  wait for a frame  */
-		err = v4l1_compat_sync(arg, file, drv);
-		break;
-	case VIDIOCGVBIFMT: /* query VBI data capture format */
-		err = v4l1_compat_get_vbi_format(arg, file, drv);
-		break;
-	case VIDIOCSVBIFMT:
-		err = v4l1_compat_set_vbi_format(arg, file, drv);
-		break;
-	default:
-		err = -ENOIOCTLCMD;
-		break;
-	}
-
-	return err;
-}
-EXPORT_SYMBOL(v4l_compat_translate_ioctl);
-
-/*
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 9294282b5ad..3f0871b550a 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -150,7 +150,7 @@ EXPORT_SYMBOL(v4l2_prio_check);
    struct v4l2_queryctrl and the available menu items. Note that
    menu_items may be NULL, in that case it is ignored. */
 int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
-		const char **menu_items)
+		const char * const *menu_items)
 {
 	if (qctrl->flags & V4L2_CTRL_FLAG_DISABLED)
 		return -EINVAL;
@@ -199,7 +199,7 @@ EXPORT_SYMBOL(v4l2_ctrl_query_fill);
    If menu_items is NULL, then the menu items are retrieved using
    v4l2_ctrl_get_menu. */
 int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu, struct v4l2_queryctrl *qctrl,
-	       const char **menu_items)
+	       const char * const *menu_items)
 {
 	int i;
 
@@ -222,7 +222,7 @@ EXPORT_SYMBOL(v4l2_ctrl_query_menu);
    Use this if there are 'holes' in the list of valid menu items. */
 int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids)
 {
-	const char **menu_items = v4l2_ctrl_get_menu(qmenu->id);
+	const char * const *menu_items = v4l2_ctrl_get_menu(qmenu->id);
 
 	qmenu->reserved = 0;
 	if (menu_items == NULL || ids == NULL)
@@ -368,18 +368,15 @@ EXPORT_SYMBOL_GPL(v4l2_i2c_subdev_init);
 
 /* Load an i2c sub-device. */
 struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter, const char *module_name,
-		struct i2c_board_info *info, const unsigned short *probe_addrs)
+		struct i2c_adapter *adapter, struct i2c_board_info *info,
+		const unsigned short *probe_addrs)
 {
 	struct v4l2_subdev *sd = NULL;
 	struct i2c_client *client;
 
 	BUG_ON(!v4l2_dev);
 
-	if (module_name)
-		request_module(module_name);
-	else
-		request_module(I2C_MODULE_PREFIX "%s", info->type);
+	request_module(I2C_MODULE_PREFIX "%s", info->type);
 
 	/* Create the i2c client */
 	if (info->addr == 0 && probe_addrs)
@@ -432,8 +429,7 @@ error:
 EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board);
 
 struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter,
-		const char *module_name, const char *client_type,
+		struct i2c_adapter *adapter, const char *client_type,
 		int irq, void *platform_data,
 		u8 addr, const unsigned short *probe_addrs)
 {
@@ -447,8 +443,7 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
 	info.irq = irq;
 	info.platform_data = platform_data;
 
-	return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name,
-			&info, probe_addrs);
+	return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, &info, probe_addrs);
 }
 EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg);
 
diff --git a/drivers/media/video/v4l2-compat-ioctl32.c b/drivers/media/video/v4l2-compat-ioctl32.c
index 86294ed35c9..dc82eb83c1d 100644
--- a/drivers/media/video/v4l2-compat-ioctl32.c
+++ b/drivers/media/video/v4l2-compat-ioctl32.c
@@ -15,220 +15,12 @@
 
 #include <linux/compat.h>
 #define __OLD_VIDIOC_ /* To allow fixing old calls*/
-#include <linux/videodev.h>
 #include <linux/videodev2.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <media/v4l2-ioctl.h>
 
 #ifdef CONFIG_COMPAT
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-struct video_tuner32 {
-	compat_int_t tuner;
-	char name[32];
-	compat_ulong_t rangelow, rangehigh;
-	u32 flags;	/* It is really u32 in videodev.h */
-	u16 mode, signal;
-};
-
-static int get_video_tuner32(struct video_tuner *kp, struct video_tuner32 __user *up)
-{
-	if (!access_ok(VERIFY_READ, up, sizeof(struct video_tuner32)) ||
-		get_user(kp->tuner, &up->tuner) ||
-		copy_from_user(kp->name, up->name, 32) ||
-		get_user(kp->rangelow, &up->rangelow) ||
-		get_user(kp->rangehigh, &up->rangehigh) ||
-		get_user(kp->flags, &up->flags) ||
-		get_user(kp->mode, &up->mode) ||
-		get_user(kp->signal, &up->signal))
-		return -EFAULT;
-	return 0;
-}
-
-static int put_video_tuner32(struct video_tuner *kp, struct video_tuner32 __user *up)
-{
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct video_tuner32)) ||
-		put_user(kp->tuner, &up->tuner) ||
-		copy_to_user(up->name, kp->name, 32) ||
-		put_user(kp->rangelow, &up->rangelow) ||
-		put_user(kp->rangehigh, &up->rangehigh) ||
-		put_user(kp->flags, &up->flags) ||
-		put_user(kp->mode, &up->mode) ||
-		put_user(kp->signal, &up->signal))
-			return -EFAULT;
-	return 0;
-}
-
-struct video_buffer32 {
-	compat_caddr_t base;
-	compat_int_t height, width, depth, bytesperline;
-};
-
-static int get_video_buffer32(struct video_buffer *kp, struct video_buffer32 __user *up)
-{
-	u32 tmp;
-
-	if (!access_ok(VERIFY_READ, up, sizeof(struct video_buffer32)) ||
-		get_user(tmp, &up->base) ||
-		get_user(kp->height, &up->height) ||
-		get_user(kp->width, &up->width) ||
-		get_user(kp->depth, &up->depth) ||
-		get_user(kp->bytesperline, &up->bytesperline))
-			return -EFAULT;
-
-	/* This is actually a physical address stored
-	 * as a void pointer.
-	 */
-	kp->base = (void *)(unsigned long) tmp;
-
-	return 0;
-}
-
-static int put_video_buffer32(struct video_buffer *kp, struct video_buffer32 __user *up)
-{
-	u32 tmp = (u32)((unsigned long)kp->base);
-
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct video_buffer32)) ||
-		put_user(tmp, &up->base) ||
-		put_user(kp->height, &up->height) ||
-		put_user(kp->width, &up->width) ||
-		put_user(kp->depth, &up->depth) ||
-		put_user(kp->bytesperline, &up->bytesperline))
-			return -EFAULT;
-	return 0;
-}
-
-struct video_clip32 {
-	s32 x, y, width, height;	/* It's really s32 in videodev.h */
-	compat_caddr_t next;
-};
-
-struct video_window32 {
-	u32 x, y, width, height, chromakey, flags;
-	compat_caddr_t clips;
-	compat_int_t clipcount;
-};
-
-static int get_video_window32(struct video_window *kp, struct video_window32 __user *up)
-{
-	struct video_clip __user *uclips;
-	struct video_clip __user *kclips;
-	compat_caddr_t p;
-	int nclips;
-
-	if (!access_ok(VERIFY_READ, up, sizeof(struct video_window32)))
-		return -EFAULT;
-
-	if (get_user(nclips, &up->clipcount))
-		return -EFAULT;
-
-	if (!access_ok(VERIFY_READ, up, sizeof(struct video_window32)) ||
-	    get_user(kp->x, &up->x) ||
-	    get_user(kp->y, &up->y) ||
-	    get_user(kp->width, &up->width) ||
-	    get_user(kp->height, &up->height) ||
-	    get_user(kp->chromakey, &up->chromakey) ||
-	    get_user(kp->flags, &up->flags) ||
-	    get_user(kp->clipcount, &up->clipcount))
-		return -EFAULT;
-
-	nclips = kp->clipcount;
-	kp->clips = NULL;
-
-	if (nclips == 0)
-		return 0;
-	if (get_user(p, &up->clips))
-		return -EFAULT;
-	uclips = compat_ptr(p);
-
-	/* If nclips < 0, then it is a clipping bitmap of size
-	   VIDEO_CLIPMAP_SIZE */
-	if (nclips < 0) {
-		if (!access_ok(VERIFY_READ, uclips, VIDEO_CLIPMAP_SIZE))
-			return -EFAULT;
-		kp->clips = compat_alloc_user_space(VIDEO_CLIPMAP_SIZE);
-		if (copy_in_user(kp->clips, uclips, VIDEO_CLIPMAP_SIZE))
-			return -EFAULT;
-		return 0;
-	}
-
-	/* Otherwise it is an array of video_clip structs. */
-	if (!access_ok(VERIFY_READ, uclips, nclips * sizeof(struct video_clip)))
-		return -EFAULT;
-
-	kp->clips = compat_alloc_user_space(nclips * sizeof(struct video_clip));
-	kclips = kp->clips;
-	while (nclips--) {
-		int err;
-
-		err = copy_in_user(&kclips->x, &uclips->x, sizeof(kclips->x));
-		err |= copy_in_user(&kclips->y, &uclips->y, sizeof(kclips->y));
-		err |= copy_in_user(&kclips->width, &uclips->width, sizeof(kclips->width));
-		err |= copy_in_user(&kclips->height, &uclips->height, sizeof(kclips->height));
-		kclips->next = NULL;
-		if (err)
-			return -EFAULT;
-		kclips++;
-		uclips++;
-	}
-	return 0;
-}
-
-/* You get back everything except the clips... */
-static int put_video_window32(struct video_window *kp, struct video_window32 __user *up)
-{
-	if (!access_ok(VERIFY_WRITE, up, sizeof(struct video_window32)) ||
-		put_user(kp->x, &up->x) ||
-		put_user(kp->y, &up->y) ||
-		put_user(kp->width, &up->width) ||
-		put_user(kp->height, &up->height) ||
-		put_user(kp->chromakey, &up->chromakey) ||
-		put_user(kp->flags, &up->flags) ||
-		put_user(kp->clipcount, &up->clipcount))
-			return -EFAULT;
-	return 0;
-}
-
-struct video_code32 {
-	char		loadwhat[16];	/* name or tag of file being passed */
-	compat_int_t	datasize;
-	compat_uptr_t	data;
-};
-
-static struct video_code __user *get_microcode32(struct video_code32 *kp)
-{
-	struct video_code __user *up;
-
-	up = compat_alloc_user_space(sizeof(*up));
-
-	/*
-	 * NOTE! We don't actually care if these fail. If the
-	 * user address is invalid, the native ioctl will do
-	 * the error handling for us
-	 */
-	(void) copy_to_user(up->loadwhat, kp->loadwhat, sizeof(up->loadwhat));
-	(void) put_user(kp->datasize, &up->datasize);
-	(void) put_user(compat_ptr(kp->data), &up->data);
-	return up;
-}
-
-#define VIDIOCGTUNER32		_IOWR('v', 4, struct video_tuner32)
-#define VIDIOCSTUNER32		_IOW('v', 5, struct video_tuner32)
-#define VIDIOCGWIN32		_IOR('v', 9, struct video_window32)
-#define VIDIOCSWIN32		_IOW('v', 10, struct video_window32)
-#define VIDIOCGFBUF32		_IOR('v', 11, struct video_buffer32)
-#define VIDIOCSFBUF32		_IOW('v', 12, struct video_buffer32)
-#define VIDIOCGFREQ32		_IOR('v', 14, u32)
-#define VIDIOCSFREQ32		_IOW('v', 15, u32)
-#define VIDIOCSMICROCODE32	_IOW('v', 27, struct video_code32)
-
-#define VIDIOCCAPTURE32		_IOW('v', 8, s32)
-#define VIDIOCSYNC32		_IOW('v', 18, s32)
-#define VIDIOCSWRITEMODE32	_IOW('v', 25, s32)
-
-#endif
-
 static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	long ret = -ENOIOCTLCMD;
@@ -373,8 +165,6 @@ static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user
 		if (copy_from_user(kp, up, sizeof(kp->fmt.raw_data)))
 			return -EFAULT;
 		return 0;
-	case 0:
-		return -EINVAL;
 	default:
 		printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
 								kp->type);
@@ -404,8 +194,6 @@ static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user
 		if (copy_to_user(up, kp, sizeof(up->fmt.raw_data)))
 			return -EFAULT;
 		return 0;
-	case 0:
-		return -EINVAL;
 	default:
 		printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n",
 								kp->type);
@@ -742,13 +530,6 @@ static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext
 static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	union {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-		struct video_tuner vt;
-		struct video_buffer vb;
-		struct video_window vw;
-		struct video_code32 vc;
-		struct video_audio va;
-#endif
 		struct v4l2_format v2f;
 		struct v4l2_buffer v2b;
 		struct v4l2_framebuffer v2fb;
@@ -764,17 +545,6 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 
 	/* First, convert the command. */
 	switch (cmd) {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCGTUNER32: cmd = VIDIOCGTUNER; break;
-	case VIDIOCSTUNER32: cmd = VIDIOCSTUNER; break;
-	case VIDIOCGWIN32: cmd = VIDIOCGWIN; break;
-	case VIDIOCSWIN32: cmd = VIDIOCSWIN; break;
-	case VIDIOCGFBUF32: cmd = VIDIOCGFBUF; break;
-	case VIDIOCSFBUF32: cmd = VIDIOCSFBUF; break;
-	case VIDIOCGFREQ32: cmd = VIDIOCGFREQ; break;
-	case VIDIOCSFREQ32: cmd = VIDIOCSFREQ; break;
-	case VIDIOCSMICROCODE32: cmd = VIDIOCSMICROCODE; break;
-#endif
 	case VIDIOC_G_FMT32: cmd = VIDIOC_G_FMT; break;
 	case VIDIOC_S_FMT32: cmd = VIDIOC_S_FMT; break;
 	case VIDIOC_QUERYBUF32: cmd = VIDIOC_QUERYBUF; break;
@@ -801,46 +571,6 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 	}
 
 	switch (cmd) {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCSTUNER:
-	case VIDIOCGTUNER:
-		err = get_video_tuner32(&karg.vt, up);
-		compatible_arg = 0;
-		break;
-
-	case VIDIOCSFBUF:
-		err = get_video_buffer32(&karg.vb, up);
-		compatible_arg = 0;
-		break;
-
-	case VIDIOCSWIN:
-		err = get_video_window32(&karg.vw, up);
-		compatible_arg = 0;
-		break;
-
-	case VIDIOCGWIN:
-	case VIDIOCGFBUF:
-	case VIDIOCGFREQ:
-		compatible_arg = 0;
-		break;
-
-	case VIDIOCSMICROCODE:
-		/* Copy the 32-bit "video_code32" to kernel space */
-		if (copy_from_user(&karg.vc, up, sizeof(karg.vc)))
-			return -EFAULT;
-		/* Convert the 32-bit version to a 64-bit version in user space */
-		up = get_microcode32(&karg.vc);
-		break;
-
-	case VIDIOCSFREQ:
-		err = get_user(karg.vx, (u32 __user *)up);
-		compatible_arg = 0;
-		break;
-
-	case VIDIOCCAPTURE:
-	case VIDIOCSYNC:
-	case VIDIOCSWRITEMODE:
-#endif
 	case VIDIOC_OVERLAY:
 	case VIDIOC_STREAMON:
 	case VIDIOC_STREAMOFF:
@@ -923,23 +653,6 @@ static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long ar
 		return err;
 
 	switch (cmd) {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCGTUNER:
-		err = put_video_tuner32(&karg.vt, up);
-		break;
-
-	case VIDIOCGWIN:
-		err = put_video_window32(&karg.vw, up);
-		break;
-
-	case VIDIOCGFBUF:
-		err = put_video_buffer32(&karg.vb, up);
-		break;
-
-	case VIDIOCGFREQ:
-		err = put_user(((u32)karg.vx), (u32 __user *)up);
-		break;
-#endif
 	case VIDIOC_S_INPUT:
 	case VIDIOC_S_OUTPUT:
 	case VIDIOC_G_INPUT:
@@ -982,37 +695,6 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 		return ret;
 
 	switch (cmd) {
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case VIDIOCGCAP:
-	case VIDIOCGCHAN:
-	case VIDIOCSCHAN:
-	case VIDIOCGTUNER32:
-	case VIDIOCSTUNER32:
-	case VIDIOCGPICT:
-	case VIDIOCSPICT:
-	case VIDIOCCAPTURE32:
-	case VIDIOCGWIN32:
-	case VIDIOCSWIN32:
-	case VIDIOCGFBUF32:
-	case VIDIOCSFBUF32:
-	case VIDIOCKEY:
-	case VIDIOCGFREQ32:
-	case VIDIOCSFREQ32:
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-	case VIDIOCSYNC32:
-	case VIDIOCMCAPTURE:
-	case VIDIOCGMBUF:
-	case VIDIOCGUNIT:
-	case VIDIOCGCAPTURE:
-	case VIDIOCSCAPTURE:
-	case VIDIOCSPLAYMODE:
-	case VIDIOCSWRITEMODE32:
-	case VIDIOCGPLAYINFO:
-	case VIDIOCSMICROCODE32:
-	case VIDIOCGVBIFMT:
-	case VIDIOCSVBIFMT:
-#endif
 #ifdef __OLD_VIDIOC_
 	case VIDIOC_OVERLAY32_OLD:
 	case VIDIOC_S_PARM_OLD:
@@ -1097,19 +779,6 @@ long v4l2_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg)
 		ret = do_video_ioctl(file, cmd, arg);
 		break;
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	/* BTTV specific... */
-	case _IOW('v',  BASE_VIDIOCPRIVATE+0, char [256]):
-	case _IOR('v',  BASE_VIDIOCPRIVATE+1, char [256]):
-	case _IOR('v' , BASE_VIDIOCPRIVATE+2, unsigned int):
-	case _IOW('v' , BASE_VIDIOCPRIVATE+3, char [16]): /* struct bttv_pll_info */
-	case _IOR('v' , BASE_VIDIOCPRIVATE+4, int):
-	case _IOR('v' , BASE_VIDIOCPRIVATE+5, int):
-	case _IOR('v' , BASE_VIDIOCPRIVATE+6, int):
-	case _IOR('v' , BASE_VIDIOCPRIVATE+7, int):
-		ret = native_ioctl(file, cmd, (unsigned long)compat_ptr(arg));
-		break;
-#endif
 	default:
 		printk(KERN_WARNING "compat_ioctl32: "
 			"unknown ioctl '%c', dir=%d, #%d (0x%08x)\n",
diff --git a/drivers/media/video/v4l2-ctrls.c b/drivers/media/video/v4l2-ctrls.c
index 9d2502cd03f..8f81efcfcf5 100644
--- a/drivers/media/video/v4l2-ctrls.c
+++ b/drivers/media/video/v4l2-ctrls.c
@@ -38,15 +38,15 @@ struct ctrl_helper {
    the given control ID. The pointer array ends with a NULL pointer.
    An empty string signifies a menu entry that is invalid. This allows
    drivers to disable certain options if it is not supported. */
-const char **v4l2_ctrl_get_menu(u32 id)
+const char * const *v4l2_ctrl_get_menu(u32 id)
 {
-	static const char *mpeg_audio_sampling_freq[] = {
+	static const char * const mpeg_audio_sampling_freq[] = {
 		"44.1 kHz",
 		"48 kHz",
 		"32 kHz",
 		NULL
 	};
-	static const char *mpeg_audio_encoding[] = {
+	static const char * const mpeg_audio_encoding[] = {
 		"MPEG-1/2 Layer I",
 		"MPEG-1/2 Layer II",
 		"MPEG-1/2 Layer III",
@@ -54,7 +54,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"AC-3",
 		NULL
 	};
-	static const char *mpeg_audio_l1_bitrate[] = {
+	static const char * const mpeg_audio_l1_bitrate[] = {
 		"32 kbps",
 		"64 kbps",
 		"96 kbps",
@@ -71,7 +71,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"448 kbps",
 		NULL
 	};
-	static const char *mpeg_audio_l2_bitrate[] = {
+	static const char * const mpeg_audio_l2_bitrate[] = {
 		"32 kbps",
 		"48 kbps",
 		"56 kbps",
@@ -88,7 +88,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"384 kbps",
 		NULL
 	};
-	static const char *mpeg_audio_l3_bitrate[] = {
+	static const char * const mpeg_audio_l3_bitrate[] = {
 		"32 kbps",
 		"40 kbps",
 		"48 kbps",
@@ -105,7 +105,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"320 kbps",
 		NULL
 	};
-	static const char *mpeg_audio_ac3_bitrate[] = {
+	static const char * const mpeg_audio_ac3_bitrate[] = {
 		"32 kbps",
 		"40 kbps",
 		"48 kbps",
@@ -127,50 +127,50 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"640 kbps",
 		NULL
 	};
-	static const char *mpeg_audio_mode[] = {
+	static const char * const mpeg_audio_mode[] = {
 		"Stereo",
 		"Joint Stereo",
 		"Dual",
 		"Mono",
 		NULL
 	};
-	static const char *mpeg_audio_mode_extension[] = {
+	static const char * const mpeg_audio_mode_extension[] = {
 		"Bound 4",
 		"Bound 8",
 		"Bound 12",
 		"Bound 16",
 		NULL
 	};
-	static const char *mpeg_audio_emphasis[] = {
+	static const char * const mpeg_audio_emphasis[] = {
 		"No Emphasis",
 		"50/15 us",
 		"CCITT J17",
 		NULL
 	};
-	static const char *mpeg_audio_crc[] = {
+	static const char * const mpeg_audio_crc[] = {
 		"No CRC",
 		"16-bit CRC",
 		NULL
 	};
-	static const char *mpeg_video_encoding[] = {
+	static const char * const mpeg_video_encoding[] = {
 		"MPEG-1",
 		"MPEG-2",
 		"MPEG-4 AVC",
 		NULL
 	};
-	static const char *mpeg_video_aspect[] = {
+	static const char * const mpeg_video_aspect[] = {
 		"1x1",
 		"4x3",
 		"16x9",
 		"2.21x1",
 		NULL
 	};
-	static const char *mpeg_video_bitrate_mode[] = {
+	static const char * const mpeg_video_bitrate_mode[] = {
 		"Variable Bitrate",
 		"Constant Bitrate",
 		NULL
 	};
-	static const char *mpeg_stream_type[] = {
+	static const char * const mpeg_stream_type[] = {
 		"MPEG-2 Program Stream",
 		"MPEG-2 Transport Stream",
 		"MPEG-1 System Stream",
@@ -179,25 +179,25 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"MPEG-2 SVCD-compatible Stream",
 		NULL
 	};
-	static const char *mpeg_stream_vbi_fmt[] = {
+	static const char * const mpeg_stream_vbi_fmt[] = {
 		"No VBI",
 		"Private packet, IVTV format",
 		NULL
 	};
-	static const char *camera_power_line_frequency[] = {
+	static const char * const camera_power_line_frequency[] = {
 		"Disabled",
 		"50 Hz",
 		"60 Hz",
 		NULL
 	};
-	static const char *camera_exposure_auto[] = {
+	static const char * const camera_exposure_auto[] = {
 		"Auto Mode",
 		"Manual Mode",
 		"Shutter Priority Mode",
 		"Aperture Priority Mode",
 		NULL
 	};
-	static const char *colorfx[] = {
+	static const char * const colorfx[] = {
 		"None",
 		"Black & White",
 		"Sepia",
@@ -210,7 +210,7 @@ const char **v4l2_ctrl_get_menu(u32 id)
 		"Vivid",
 		NULL
 	};
-	static const char *tune_preemphasis[] = {
+	static const char * const tune_preemphasis[] = {
 		"No preemphasis",
 		"50 useconds",
 		"75 useconds",
@@ -952,7 +952,7 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, const char *name, enum v4l2_ctrl_type type,
 			s32 min, s32 max, u32 step, s32 def,
-			u32 flags, const char **qmenu, void *priv)
+			u32 flags, const char * const *qmenu, void *priv)
 {
 	struct v4l2_ctrl *ctrl;
 	unsigned sz_extra = 0;
@@ -962,13 +962,20 @@ static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
 
 	/* Sanity checks */
 	if (id == 0 || name == NULL || id >= V4L2_CID_PRIVATE_BASE ||
-	    def < min || def > max || max < min ||
+	    max < min ||
 	    (type == V4L2_CTRL_TYPE_INTEGER && step == 0) ||
 	    (type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) ||
 	    (type == V4L2_CTRL_TYPE_STRING && max == 0)) {
 		handler_set_err(hdl, -ERANGE);
 		return NULL;
 	}
+	if ((type == V4L2_CTRL_TYPE_INTEGER ||
+	     type == V4L2_CTRL_TYPE_MENU ||
+	     type == V4L2_CTRL_TYPE_BOOLEAN) &&
+	    (def < min || def > max)) {
+		handler_set_err(hdl, -ERANGE);
+		return NULL;
+	}
 
 	if (type == V4L2_CTRL_TYPE_BUTTON)
 		flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
@@ -1019,7 +1026,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
 	bool is_menu;
 	struct v4l2_ctrl *ctrl;
 	const char *name = cfg->name;
-	const char **qmenu = cfg->qmenu;
+	const char * const *qmenu = cfg->qmenu;
 	enum v4l2_ctrl_type type = cfg->type;
 	u32 flags = cfg->flags;
 	s32 min = cfg->min;
@@ -1075,7 +1082,7 @@ struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
 			const struct v4l2_ctrl_ops *ops,
 			u32 id, s32 max, s32 mask, s32 def)
 {
-	const char **qmenu = v4l2_ctrl_get_menu(id);
+	const char * const *qmenu = v4l2_ctrl_get_menu(id);
 	const char *name;
 	enum v4l2_ctrl_type type;
 	s32 min;
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 0ca7978654b..359e23290a7 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -25,7 +25,6 @@
 #include <linux/init.h>
 #include <linux/kmod.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 
@@ -187,12 +186,12 @@ static ssize_t v4l2_read(struct file *filp, char __user *buf,
 		size_t sz, loff_t *off)
 {
 	struct video_device *vdev = video_devdata(filp);
-	int ret = -EIO;
+	int ret = -ENODEV;
 
 	if (!vdev->fops->read)
 		return -EINVAL;
-	if (vdev->lock)
-		mutex_lock(vdev->lock);
+	if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+		return -ERESTARTSYS;
 	if (video_is_registered(vdev))
 		ret = vdev->fops->read(filp, buf, sz, off);
 	if (vdev->lock)
@@ -204,12 +203,12 @@ static ssize_t v4l2_write(struct file *filp, const char __user *buf,
 		size_t sz, loff_t *off)
 {
 	struct video_device *vdev = video_devdata(filp);
-	int ret = -EIO;
+	int ret = -ENODEV;
 
 	if (!vdev->fops->write)
 		return -EINVAL;
-	if (vdev->lock)
-		mutex_lock(vdev->lock);
+	if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+		return -ERESTARTSYS;
 	if (video_is_registered(vdev))
 		ret = vdev->fops->write(filp, buf, sz, off);
 	if (vdev->lock)
@@ -220,10 +219,10 @@ static ssize_t v4l2_write(struct file *filp, const char __user *buf,
 static unsigned int v4l2_poll(struct file *filp, struct poll_table_struct *poll)
 {
 	struct video_device *vdev = video_devdata(filp);
-	int ret = DEFAULT_POLLMASK;
+	int ret = POLLERR | POLLHUP;
 
 	if (!vdev->fops->poll)
-		return ret;
+		return DEFAULT_POLLMASK;
 	if (vdev->lock)
 		mutex_lock(vdev->lock);
 	if (video_is_registered(vdev))
@@ -239,18 +238,45 @@ static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	int ret = -ENODEV;
 
 	if (vdev->fops->unlocked_ioctl) {
-		if (vdev->lock)
-			mutex_lock(vdev->lock);
+		if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+			return -ERESTARTSYS;
 		if (video_is_registered(vdev))
 			ret = vdev->fops->unlocked_ioctl(filp, cmd, arg);
 		if (vdev->lock)
 			mutex_unlock(vdev->lock);
 	} else if (vdev->fops->ioctl) {
-		/* TODO: convert all drivers to unlocked_ioctl */
-		lock_kernel();
+		/* This code path is a replacement for the BKL. It is a major
+		 * hack but it will have to do for those drivers that are not
+		 * yet converted to use unlocked_ioctl.
+		 *
+		 * There are two options: if the driver implements struct
+		 * v4l2_device, then the lock defined there is used to
+		 * serialize the ioctls. Otherwise the v4l2 core lock defined
+		 * below is used. This lock is really bad since it serializes
+		 * completely independent devices.
+		 *
+		 * Both variants suffer from the same problem: if the driver
+		 * sleeps, then it blocks all ioctls since the lock is still
+		 * held. This is very common for VIDIOC_DQBUF since that
+		 * normally waits for a frame to arrive. As a result any other
+		 * ioctl calls will proceed very, very slowly since each call
+		 * will have to wait for the VIDIOC_QBUF to finish. Things that
+		 * should take 0.01s may now take 10-20 seconds.
+		 *
+		 * The workaround is to *not* take the lock for VIDIOC_DQBUF.
+		 * This actually works OK for videobuf-based drivers, since
+		 * videobuf will take its own internal lock.
+		 */
+		static DEFINE_MUTEX(v4l2_ioctl_mutex);
+		struct mutex *m = vdev->v4l2_dev ?
+			&vdev->v4l2_dev->ioctl_lock : &v4l2_ioctl_mutex;
+
+		if (cmd != VIDIOC_DQBUF && mutex_lock_interruptible(m))
+			return -ERESTARTSYS;
 		if (video_is_registered(vdev))
 			ret = vdev->fops->ioctl(filp, cmd, arg);
-		unlock_kernel();
+		if (cmd != VIDIOC_DQBUF)
+			mutex_unlock(m);
 	} else
 		ret = -ENOTTY;
 
@@ -264,8 +290,8 @@ static int v4l2_mmap(struct file *filp, struct vm_area_struct *vm)
 
 	if (!vdev->fops->mmap)
 		return ret;
-	if (vdev->lock)
-		mutex_lock(vdev->lock);
+	if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+		return -ERESTARTSYS;
 	if (video_is_registered(vdev))
 		ret = vdev->fops->mmap(filp, vm);
 	if (vdev->lock)
@@ -283,7 +309,7 @@ static int v4l2_open(struct inode *inode, struct file *filp)
 	mutex_lock(&videodev_lock);
 	vdev = video_devdata(filp);
 	/* return ENODEV if the video device has already been removed. */
-	if (vdev == NULL) {
+	if (vdev == NULL || !video_is_registered(vdev)) {
 		mutex_unlock(&videodev_lock);
 		return -ENODEV;
 	}
@@ -291,8 +317,10 @@ static int v4l2_open(struct inode *inode, struct file *filp)
 	video_get(vdev);
 	mutex_unlock(&videodev_lock);
 	if (vdev->fops->open) {
-		if (vdev->lock)
-			mutex_lock(vdev->lock);
+		if (vdev->lock && mutex_lock_interruptible(vdev->lock)) {
+			ret = -ERESTARTSYS;
+			goto err;
+		}
 		if (video_is_registered(vdev))
 			ret = vdev->fops->open(filp);
 		else
@@ -301,6 +329,7 @@ static int v4l2_open(struct inode *inode, struct file *filp)
 			mutex_unlock(vdev->lock);
 	}
 
+err:
 	/* decrease the refcount in case of an error */
 	if (ret)
 		video_put(vdev);
@@ -595,7 +624,12 @@ void video_unregister_device(struct video_device *vdev)
 	if (!vdev || !video_is_registered(vdev))
 		return;
 
+	mutex_lock(&videodev_lock);
+	/* This must be in a critical section to prevent a race with v4l2_open.
+	 * Once this bit has been cleared video_get may never be called again.
+	 */
 	clear_bit(V4L2_FL_REGISTERED, &vdev->flags);
+	mutex_unlock(&videodev_lock);
 	device_unregister(&vdev->dev);
 }
 EXPORT_SYMBOL(video_unregister_device);
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index 0b08f96b74a..7fe6f92af48 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -35,6 +35,7 @@ int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev)
 
 	INIT_LIST_HEAD(&v4l2_dev->subdevs);
 	spin_lock_init(&v4l2_dev->lock);
+	mutex_init(&v4l2_dev->ioctl_lock);
 	v4l2_dev->dev = dev;
 	if (dev == NULL) {
 		/* If dev == NULL, then name must be filled in by the caller */
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index dd9283fcb56..7e47f15f350 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -18,12 +18,8 @@
 #include <linux/kernel.h>
 
 #define __OLD_VIDIOC_ /* To allow fixing old calls */
-#include <linux/videodev.h>
 #include <linux/videodev2.h>
 
-#ifdef CONFIG_VIDEO_V4L1
-#include <linux/videodev.h>
-#endif
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-ctrls.h>
@@ -183,42 +179,6 @@ static const char *v4l2_memory_names[] = {
 
 /* ------------------------------------------------------------------ */
 /* debug help functions                                               */
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static const char *v4l1_ioctls[] = {
-	[_IOC_NR(VIDIOCGCAP)]       = "VIDIOCGCAP",
-	[_IOC_NR(VIDIOCGCHAN)]      = "VIDIOCGCHAN",
-	[_IOC_NR(VIDIOCSCHAN)]      = "VIDIOCSCHAN",
-	[_IOC_NR(VIDIOCGTUNER)]     = "VIDIOCGTUNER",
-	[_IOC_NR(VIDIOCSTUNER)]     = "VIDIOCSTUNER",
-	[_IOC_NR(VIDIOCGPICT)]      = "VIDIOCGPICT",
-	[_IOC_NR(VIDIOCSPICT)]      = "VIDIOCSPICT",
-	[_IOC_NR(VIDIOCCAPTURE)]    = "VIDIOCCAPTURE",
-	[_IOC_NR(VIDIOCGWIN)]       = "VIDIOCGWIN",
-	[_IOC_NR(VIDIOCSWIN)]       = "VIDIOCSWIN",
-	[_IOC_NR(VIDIOCGFBUF)]      = "VIDIOCGFBUF",
-	[_IOC_NR(VIDIOCSFBUF)]      = "VIDIOCSFBUF",
-	[_IOC_NR(VIDIOCKEY)]        = "VIDIOCKEY",
-	[_IOC_NR(VIDIOCGFREQ)]      = "VIDIOCGFREQ",
-	[_IOC_NR(VIDIOCSFREQ)]      = "VIDIOCSFREQ",
-	[_IOC_NR(VIDIOCGAUDIO)]     = "VIDIOCGAUDIO",
-	[_IOC_NR(VIDIOCSAUDIO)]     = "VIDIOCSAUDIO",
-	[_IOC_NR(VIDIOCSYNC)]       = "VIDIOCSYNC",
-	[_IOC_NR(VIDIOCMCAPTURE)]   = "VIDIOCMCAPTURE",
-	[_IOC_NR(VIDIOCGMBUF)]      = "VIDIOCGMBUF",
-	[_IOC_NR(VIDIOCGUNIT)]      = "VIDIOCGUNIT",
-	[_IOC_NR(VIDIOCGCAPTURE)]   = "VIDIOCGCAPTURE",
-	[_IOC_NR(VIDIOCSCAPTURE)]   = "VIDIOCSCAPTURE",
-	[_IOC_NR(VIDIOCSPLAYMODE)]  = "VIDIOCSPLAYMODE",
-	[_IOC_NR(VIDIOCSWRITEMODE)] = "VIDIOCSWRITEMODE",
-	[_IOC_NR(VIDIOCGPLAYINFO)]  = "VIDIOCGPLAYINFO",
-	[_IOC_NR(VIDIOCSMICROCODE)] = "VIDIOCSMICROCODE",
-	[_IOC_NR(VIDIOCGVBIFMT)]    = "VIDIOCGVBIFMT",
-	[_IOC_NR(VIDIOCSVBIFMT)]    = "VIDIOCSVBIFMT"
-};
-#define V4L1_IOCTLS ARRAY_SIZE(v4l1_ioctls)
-#endif
-
 static const char *v4l2_ioctls[] = {
 	[_IOC_NR(VIDIOC_QUERYCAP)]         = "VIDIOC_QUERYCAP",
 	[_IOC_NR(VIDIOC_RESERVED)]         = "VIDIOC_RESERVED",
@@ -310,15 +270,6 @@ void v4l_printk_ioctl(unsigned int cmd)
 	case 'd':
 		type = "v4l2_int";
 		break;
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	case 'v':
-		if (_IOC_NR(cmd) >= V4L1_IOCTLS) {
-			type = "v4l1";
-			break;
-		}
-		printk("%s", v4l1_ioctls[_IOC_NR(cmd)]);
-		return;
-#endif
 	case 'V':
 		if (_IOC_NR(cmd) >= V4L2_IOCTLS) {
 			type = "v4l2";
@@ -622,20 +573,6 @@ static long __video_do_ioctl(struct file *file,
 		return -EINVAL;
 	}
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	/********************************************************
-	 All other V4L1 calls are handled by v4l1_compat module.
-	 Those calls will be translated into V4L2 calls, and
-	 __video_do_ioctl will be called again, with one or more
-	 V4L2 ioctls.
-	 ********************************************************/
-	if (_IOC_TYPE(cmd) == 'v' && cmd != VIDIOCGMBUF &&
-				_IOC_NR(cmd) < BASE_VIDIOCPRIVATE) {
-		return v4l_compat_translate_ioctl(file, cmd, arg,
-						__video_do_ioctl);
-	}
-#endif
-
 	if ((vfd->debug & V4L2_DEBUG_IOCTL) &&
 				!(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) {
 		v4l_print_ioctl(vfd->name, cmd);
@@ -644,29 +581,6 @@ static long __video_do_ioctl(struct file *file,
 
 	switch (cmd) {
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	/***********************************************************
-	 Handles calls to the obsoleted V4L1 API
-	 Due to the nature of VIDIOCGMBUF, each driver that supports
-	 V4L1 should implement its own handler for this ioctl.
-	 ***********************************************************/
-
-	/* --- streaming capture ------------------------------------- */
-	case VIDIOCGMBUF:
-	{
-		struct video_mbuf *p = arg;
-
-		if (!ops->vidiocgmbuf)
-			break;
-		ret = ops->vidiocgmbuf(file, fh, p);
-		if (!ret)
-			dbgarg(cmd, "size=%d, frames=%d, offsets=0x%08lx\n",
-						p->size, p->frames,
-						(unsigned long)p->offsets);
-		break;
-	}
-#endif
-
 	/* --- capabilities ------------------------------------------ */
 	case VIDIOC_QUERYCAP:
 	{
diff --git a/drivers/media/video/via-camera.c b/drivers/media/video/via-camera.c
index 02a21bccae1..e25aca5759f 100644
--- a/drivers/media/video/via-camera.c
+++ b/drivers/media/video/via-camera.c
@@ -1161,16 +1161,6 @@ out:
 	return ret;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int viacam_vidiocgmbuf(struct file *filp, void *priv,
-		struct video_mbuf *mbuf)
-{
-	struct via_camera *cam = priv;
-
-	return videobuf_cgmbuf(&cam->vb_queue, mbuf, 6);
-}
-#endif
-
 /* G/S_PARM */
 
 static int viacam_g_parm(struct file *filp, void *priv,
@@ -1251,9 +1241,6 @@ static const struct v4l2_ioctl_ops viacam_ioctl_ops = {
 	.vidioc_s_parm		= viacam_s_parm,
 	.vidioc_enum_framesizes = viacam_enum_framesizes,
 	.vidioc_enum_frameintervals = viacam_enum_frameintervals,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf		= viacam_vidiocgmbuf,
-#endif
 };
 
 /*----------------------------------------------------------------------------*/
@@ -1360,7 +1347,7 @@ static __devinit int viacam_probe(struct platform_device *pdev)
 	 */
 	sensor_adapter = viafb_find_i2c_adapter(VIA_PORT_31);
 	cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, sensor_adapter,
-			"ov7670", "ov7670", 0x42 >> 1, NULL);
+			"ov7670", 0x42 >> 1, NULL);
 	if (cam->sensor == NULL) {
 		dev_err(&pdev->dev, "Unable to find the sensor!\n");
 		ret = -ENODEV;
diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c
index 8979f91fa8e..de4fa4eb884 100644
--- a/drivers/media/video/videobuf-core.c
+++ b/drivers/media/video/videobuf-core.c
@@ -1202,33 +1202,3 @@ int videobuf_mmap_mapper(struct videobuf_queue *q, struct vm_area_struct *vma)
 	return rc;
 }
 EXPORT_SYMBOL_GPL(videobuf_mmap_mapper);
-
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-int videobuf_cgmbuf(struct videobuf_queue *q,
-		    struct video_mbuf *mbuf, int count)
-{
-	struct v4l2_requestbuffers req;
-	int rc, i;
-
-	MAGIC_CHECK(q->int_ops->magic, MAGIC_QTYPE_OPS);
-
-	memset(&req, 0, sizeof(req));
-	req.type   = q->type;
-	req.count  = count;
-	req.memory = V4L2_MEMORY_MMAP;
-	rc = videobuf_reqbufs(q, &req);
-	if (rc < 0)
-		return rc;
-
-	mbuf->frames = req.count;
-	mbuf->size   = 0;
-	for (i = 0; i < mbuf->frames; i++) {
-		mbuf->offsets[i]  = q->bufs[i]->boff;
-		mbuf->size       += PAGE_ALIGN(q->bufs[i]->bsize);
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(videobuf_cgmbuf);
-#endif
-
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index 20f227ee2b3..ddb8f4b46c0 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -69,10 +69,9 @@ static struct scatterlist *videobuf_vmalloc_to_sg(unsigned char *virt,
 	struct page *pg;
 	int i;
 
-	sglist = vmalloc(nr_pages * sizeof(*sglist));
+	sglist = vzalloc(nr_pages * sizeof(*sglist));
 	if (NULL == sglist)
 		return NULL;
-	memset(sglist, 0, nr_pages * sizeof(*sglist));
 	sg_init_table(sglist, nr_pages);
 	for (i = 0; i < nr_pages; i++, virt += PAGE_SIZE) {
 		pg = vmalloc_to_page(virt);
@@ -544,14 +543,6 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
 
 	retval = -EINVAL;
 
-	/* This function maintains backwards compatibility with V4L1 and will
-	 * map more than one buffer if the vma length is equal to the combined
-	 * size of multiple buffers than it will map them together.  See
-	 * VIDIOCGMBUF in the v4l spec
-	 *
-	 * TODO: Allow drivers to specify if they support this mode
-	 */
-
 	BUG_ON(!mem);
 	MAGIC_CHECK(mem->magic, MAGIC_SG_MEM);
 
@@ -571,29 +562,6 @@ static int __videobuf_mmap_mapper(struct videobuf_queue *q,
 	}
 
 	last = first;
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	if (size != (vma->vm_end - vma->vm_start)) {
-		/* look for last buffer to map */
-		for (last = first + 1; last < VIDEO_MAX_FRAME; last++) {
-			if (NULL == q->bufs[last])
-				continue;
-			if (V4L2_MEMORY_MMAP != q->bufs[last]->memory)
-				continue;
-			if (q->bufs[last]->map) {
-				retval = -EBUSY;
-				goto done;
-			}
-			size += PAGE_ALIGN(q->bufs[last]->bsize);
-			if (size == (vma->vm_end - vma->vm_start))
-				break;
-		}
-		if (VIDEO_MAX_FRAME == last) {
-			dprintk(1, "mmap app bug: size invalid [size=0x%lx]\n",
-					(vma->vm_end - vma->vm_start));
-			goto done;
-		}
-	}
-#endif
 
 	/* create mapping + update buffer list */
 	retval = -ENOMEM;
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index e5e005dc155..d63e9d97849 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -2954,9 +2954,6 @@ static int vino_enum_input(struct file *file, void *__fh,
 	if (input == VINO_INPUT_NONE)
 		return -EINVAL;
 
-	memset(i, 0, sizeof(struct v4l2_input));
-
-	i->index = index;
 	i->type = V4L2_INPUT_TYPE_CAMERA;
 	i->std = vino_inputs[input].std;
 	strcpy(i->name, vino_inputs[input].name);
@@ -4334,10 +4331,10 @@ static int __init vino_module_init(void)
 
 	vino_drvdata->decoder =
 		v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
-			       NULL, "saa7191", 0, I2C_ADDRS(0x45));
+			       "saa7191", 0, I2C_ADDRS(0x45));
 	vino_drvdata->camera =
 		v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
-			       NULL, "indycam", 0, I2C_ADDRS(0x2b));
+			       "indycam", 0, I2C_ADDRS(0x2b));
 
 	dprintk("init complete!\n");
 
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 9797e5a6926..c49c39386bd 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -870,15 +870,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
 				file->f_flags & O_NONBLOCK);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct vivi_dev *dev = video_drvdata(file);
-
-	return videobuf_cgmbuf(&dev->vb_vidq, mbuf, 8);
-}
-#endif
-
 static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 {
 	struct vivi_dev *dev = video_drvdata(file);
@@ -1105,9 +1096,6 @@ static const struct v4l2_ioctl_ops vivi_ioctl_ops = {
 	.vidioc_queryctrl     = vidioc_queryctrl,
 	.vidioc_g_ctrl        = vidioc_g_ctrl,
 	.vidioc_s_ctrl        = vidioc_s_ctrl,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf          = vidiocgmbuf,
-#endif
 };
 
 static struct video_device vivi_template = {
diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c
index 635420d8d84..019ee206cbe 100644
--- a/drivers/media/video/w9966.c
+++ b/drivers/media/video/w9966.c
@@ -815,7 +815,7 @@ out:
 
 static const struct v4l2_file_operations w9966_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl          = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 	.read           = w9966_v4l_read,
 };
 
diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c
index 13552564908..fe8ef6419f8 100644
--- a/drivers/media/video/wm8775.c
+++ b/drivers/media/video/wm8775.c
@@ -35,7 +35,6 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
 #include <media/v4l2-ctrls.h>
-#include <media/wm8775.h>
 
 MODULE_DESCRIPTION("wm8775 driver");
 MODULE_AUTHOR("Ulf Eklund, Hans Verkuil");
@@ -51,16 +50,10 @@ enum {
 	TOT_REGS
 };
 
-#define ALC_HOLD 0x85 /* R17: use zero cross detection, ALC hold time 42.6 ms */
-#define ALC_EN 0x100  /* R17: ALC enable */
-
 struct wm8775_state {
 	struct v4l2_subdev sd;
 	struct v4l2_ctrl_handler hdl;
 	struct v4l2_ctrl *mute;
-	struct v4l2_ctrl *vol;
-	struct v4l2_ctrl *bal;
-	struct v4l2_ctrl *loud;
 	u8 input;		/* Last selected input (0-0xf) */
 };
 
@@ -92,30 +85,6 @@ static int wm8775_write(struct v4l2_subdev *sd, int reg, u16 val)
 	return -1;
 }
 
-static void wm8775_set_audio(struct v4l2_subdev *sd, int quietly)
-{
-	struct wm8775_state *state = to_state(sd);
-	u8 vol_l, vol_r;
-	int muted = 0 != state->mute->val;
-	u16 volume = (u16)state->vol->val;
-	u16 balance = (u16)state->bal->val;
-
-	/* normalize ( 65535 to 0 -> 255 to 0 (+24dB to -103dB) ) */
-	vol_l = (min(65536 - balance, 32768) * volume) >> 23;
-	vol_r = (min(balance, (u16)32768) * volume) >> 23;
-
-	/* Mute */
-	if (muted || quietly)
-		wm8775_write(sd, R21, 0x0c0 | state->input);
-
-	wm8775_write(sd, R14, vol_l | 0x100); /* 0x100= Left channel ADC zero cross enable */
-	wm8775_write(sd, R15, vol_r | 0x100); /* 0x100= Right channel ADC zero cross enable */
-
-	/* Un-mute */
-	if (!muted)
-		wm8775_write(sd, R21, state->input);
-}
-
 static int wm8775_s_routing(struct v4l2_subdev *sd,
 			    u32 input, u32 output, u32 config)
 {
@@ -133,26 +102,25 @@ static int wm8775_s_routing(struct v4l2_subdev *sd,
 	state->input = input;
 	if (!v4l2_ctrl_g_ctrl(state->mute))
 		return 0;
-	if (!v4l2_ctrl_g_ctrl(state->vol))
-		return 0;
-	if (!v4l2_ctrl_g_ctrl(state->bal))
-		return 0;
-	wm8775_set_audio(sd, 1);
+	wm8775_write(sd, R21, 0x0c0);
+	wm8775_write(sd, R14, 0x1d4);
+	wm8775_write(sd, R15, 0x1d4);
+	wm8775_write(sd, R21, 0x100 + state->input);
 	return 0;
 }
 
 static int wm8775_s_ctrl(struct v4l2_ctrl *ctrl)
 {
 	struct v4l2_subdev *sd = to_sd(ctrl);
+	struct wm8775_state *state = to_state(sd);
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_MUTE:
-	case V4L2_CID_AUDIO_VOLUME:
-	case V4L2_CID_AUDIO_BALANCE:
-		wm8775_set_audio(sd, 0);
-		return 0;
-	case V4L2_CID_AUDIO_LOUDNESS:
-		wm8775_write(sd, R17, (ctrl->val ? ALC_EN : 0) | ALC_HOLD);
+		wm8775_write(sd, R21, 0x0c0);
+		wm8775_write(sd, R14, 0x1d4);
+		wm8775_write(sd, R15, 0x1d4);
+		if (!ctrl->val)
+			wm8775_write(sd, R21, 0x100 + state->input);
 		return 0;
 	}
 	return -EINVAL;
@@ -176,7 +144,16 @@ static int wm8775_log_status(struct v4l2_subdev *sd)
 
 static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq)
 {
-	wm8775_set_audio(sd, 0);
+	struct wm8775_state *state = to_state(sd);
+
+	/* If I remove this, then it can happen that I have no
+	   sound the first time I tune from static to a valid channel.
+	   It's difficult to reproduce and is almost certainly related
+	   to the zero cross detect circuit. */
+	wm8775_write(sd, R21, 0x0c0);
+	wm8775_write(sd, R14, 0x1d4);
+	wm8775_write(sd, R15, 0x1d4);
+	wm8775_write(sd, R21, 0x100 + state->input);
 	return 0;
 }
 
@@ -226,7 +203,6 @@ static int wm8775_probe(struct i2c_client *client,
 {
 	struct wm8775_state *state;
 	struct v4l2_subdev *sd;
-	int err;
 
 	/* Check if the adapter supports the needed features */
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
@@ -240,21 +216,15 @@ static int wm8775_probe(struct i2c_client *client,
 		return -ENOMEM;
 	sd = &state->sd;
 	v4l2_i2c_subdev_init(sd, client, &wm8775_ops);
-	sd->grp_id = WM8775_GID; /* subdev group id */
 	state->input = 2;
 
-	v4l2_ctrl_handler_init(&state->hdl, 4);
+	v4l2_ctrl_handler_init(&state->hdl, 1);
 	state->mute = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
 			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0);
-	state->vol = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
-			V4L2_CID_AUDIO_VOLUME, 0, 65535, (65535+99)/100, 0xCF00); /* 0dB*/
-	state->bal = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
-			V4L2_CID_AUDIO_BALANCE, 0, 65535, (65535+99)/100, 32768);
-	state->loud = v4l2_ctrl_new_std(&state->hdl, &wm8775_ctrl_ops,
-			V4L2_CID_AUDIO_LOUDNESS, 0, 1, 1, 1);
 	sd->ctrl_handler = &state->hdl;
-	err = state->hdl.error;
-	if (err) {
+	if (state->hdl.error) {
+		int err = state->hdl.error;
+
 		v4l2_ctrl_handler_free(&state->hdl);
 		kfree(state);
 		return err;
@@ -266,25 +236,29 @@ static int wm8775_probe(struct i2c_client *client,
 	wm8775_write(sd, R23, 0x000);
 	/* Disable zero cross detect timeout */
 	wm8775_write(sd, R7, 0x000);
-	/* HPF enable, I2S mode, 24-bit */
-	wm8775_write(sd, R11, 0x022);
+	/* Left justified, 24-bit mode */
+	wm8775_write(sd, R11, 0x021);
 	/* Master mode, clock ratio 256fs */
 	wm8775_write(sd, R12, 0x102);
 	/* Powered up */
 	wm8775_write(sd, R13, 0x000);
-	/* ALC stereo, ALC target level -5dB FS, ALC max gain +8dB */
-	wm8775_write(sd, R16, 0x1bb);
-	/* Set ALC mode and hold time */
-	wm8775_write(sd, R17, (state->loud->val ? ALC_EN : 0) | ALC_HOLD);
+	/* ADC gain +2.5dB, enable zero cross */
+	wm8775_write(sd, R14, 0x1d4);
+	/* ADC gain +2.5dB, enable zero cross */
+	wm8775_write(sd, R15, 0x1d4);
+	/* ALC Stereo, ALC target level -1dB FS max gain +8dB */
+	wm8775_write(sd, R16, 0x1bf);
+	/* Enable gain control, use zero cross detection,
+	   ALC hold time 42.6 ms */
+	wm8775_write(sd, R17, 0x185);
 	/* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */
 	wm8775_write(sd, R18, 0x0a2);
 	/* Enable noise gate, threshold -72dBfs */
 	wm8775_write(sd, R19, 0x005);
-	/* Transient window 4ms, ALC min gain -5dB  */
-	wm8775_write(sd, R20, 0x0fb);
-
-	wm8775_set_audio(sd, 1);      /* set volume/mute/mux */
-
+	/* Transient window 4ms, lower PGA gain limit -1dB */
+	wm8775_write(sd, R20, 0x07a);
+	/* LRBOTH = 1, use input 2. */
+	wm8775_write(sd, R21, 0x102);
 	return 0;
 }
 
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 37fe16181e3..4bb368e6fd4 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -33,15 +33,6 @@
 
 #include <media/v4l2-device.h>
 
-#define ZORAN_VIDMODE_PAL	0
-#define ZORAN_VIDMODE_NTSC	1
-#define ZORAN_VIDMODE_SECAM	2
-
-struct zoran_requestbuffers {
-	unsigned long count;	/* Number of buffers for MJPEG grabbing */
-	unsigned long size;	/* Size PER BUFFER in bytes */
-};
-
 struct zoran_sync {
 	unsigned long frame;	/* number of buffer that has been free'd */
 	unsigned long length;	/* number of code bytes in buffer (capture only) */
@@ -49,102 +40,6 @@ struct zoran_sync {
 	struct timeval timestamp;	/* timestamp */
 };
 
-struct zoran_status {
-	int input;		/* Input channel, has to be set prior to BUZIOC_G_STATUS */
-	int signal;		/* Returned: 1 if valid video signal detected */
-	int norm;		/* Returned: ZORAN_VIDMODE_PAL or ZORAN_VIDMODE_NTSC */
-	int color;		/* Returned: 1 if color signal detected */
-};
-
-struct zoran_params {
-
-	/* The following parameters can only be queried */
-
-	int major_version;	/* Major version number of driver */
-	int minor_version;	/* Minor version number of driver */
-
-	/* Main control parameters */
-
-	int input;		/* Input channel: 0 = Composite, 1 = S-VHS */
-	int norm;		/* Norm: ZORAN_VIDMODE_PAL or ZORAN_VIDMODE_NTSC */
-	int decimation;		/* decimation of captured video,
-				 * enlargement of video played back.
-				 * Valid values are 1, 2, 4 or 0.
-				 * 0 is a special value where the user
-				 * has full control over video scaling */
-
-	/* The following parameters only have to be set if decimation==0,
-	 * for other values of decimation they provide the data how the image is captured */
-
-	int HorDcm;		/* Horizontal decimation: 1, 2 or 4 */
-	int VerDcm;		/* Vertical decimation: 1 or 2 */
-	int TmpDcm;		/* Temporal decimation: 1 or 2,
-				 * if TmpDcm==2 in capture every second frame is dropped,
-				 * in playback every frame is played twice */
-	int field_per_buff;	/* Number of fields per buffer: 1 or 2 */
-	int img_x;		/* start of image in x direction */
-	int img_y;		/* start of image in y direction */
-	int img_width;		/* image width BEFORE decimation,
-				 * must be a multiple of HorDcm*16 */
-	int img_height;		/* image height BEFORE decimation,
-				 * must be a multiple of VerDcm*8 */
-
-	/* --- End of parameters for decimation==0 only --- */
-
-	/* JPEG control parameters */
-
-	int quality;		/* Measure for quality of compressed images.
-				 * Scales linearly with the size of the compressed images.
-				 * Must be beetween 0 and 100, 100 is a compression
-				 * ratio of 1:4 */
-
-	int odd_even;		/* Which field should come first ??? */
-
-	int APPn;		/* Number of APP segment to be written, must be 0..15 */
-	int APP_len;		/* Length of data in JPEG APPn segment */
-	char APP_data[60];	/* Data in the JPEG APPn segment. */
-
-	int COM_len;		/* Length of data in JPEG COM segment */
-	char COM_data[60];	/* Data in JPEG COM segment */
-
-	unsigned long jpeg_markers;	/* Which markers should go into the JPEG output.
-					 * Unless you exactly know what you do, leave them untouched.
-					 * Inluding less markers will make the resulting code
-					 * smaller, but there will be fewer applications
-					 * which can read it.
-					 * The presence of the APP and COM marker is
-					 * influenced by APP0_len and COM_len ONLY! */
-#define JPEG_MARKER_DHT (1<<3)	/* Define Huffman Tables */
-#define JPEG_MARKER_DQT (1<<4)	/* Define Quantization Tables */
-#define JPEG_MARKER_DRI (1<<5)	/* Define Restart Interval */
-#define JPEG_MARKER_COM (1<<6)	/* Comment segment */
-#define JPEG_MARKER_APP (1<<7)	/* App segment, driver will allways use APP0 */
-
-	int VFIFO_FB;		/* Flag for enabling Video Fifo Feedback.
-				 * If this flag is turned on and JPEG decompressing
-				 * is going to the screen, the decompress process
-				 * is stopped every time the Video Fifo is full.
-				 * This enables a smooth decompress to the screen
-				 * but the video output signal will get scrambled */
-
-	/* Misc */
-
-	char reserved[312];	/* Makes 512 bytes for this structure */
-};
-
-/*
-Private IOCTL to set up for displaying MJPEG
-*/
-#define BUZIOC_G_PARAMS       _IOR ('v', BASE_VIDIOC_PRIVATE+0,  struct zoran_params)
-#define BUZIOC_S_PARAMS       _IOWR('v', BASE_VIDIOC_PRIVATE+1,  struct zoran_params)
-#define BUZIOC_REQBUFS        _IOWR('v', BASE_VIDIOC_PRIVATE+2,  struct zoran_requestbuffers)
-#define BUZIOC_QBUF_CAPT      _IOW ('v', BASE_VIDIOC_PRIVATE+3,  int)
-#define BUZIOC_QBUF_PLAY      _IOW ('v', BASE_VIDIOC_PRIVATE+4,  int)
-#define BUZIOC_SYNC           _IOR ('v', BASE_VIDIOC_PRIVATE+5,  struct zoran_sync)
-#define BUZIOC_G_STATUS       _IOWR('v', BASE_VIDIOC_PRIVATE+6,  struct zoran_status)
-
-
-#ifdef __KERNEL__
 
 #define MAJOR_VERSION 0		/* driver major version */
 #define MINOR_VERSION 10	/* driver minor version */
@@ -388,6 +283,7 @@ struct zoran {
 	struct videocodec *vfe;	/* video front end */
 
 	struct mutex resource_lock;	/* prevent evil stuff */
+	struct mutex other_lock;	/* please merge with above */
 
 	u8 initialized;		/* flag if zoran has been correctly initialized */
 	int user;		/* number of current users */
@@ -506,6 +402,4 @@ static inline struct zoran *to_zoran(struct v4l2_device *v4l2_dev)
 #define btor(dat,adr)       btwrite((dat) | btread(adr), adr)
 #define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr)
 
-#endif				/* __kernel__ */
-
 #endif
diff --git a/drivers/media/video/zoran/zoran_card.c b/drivers/media/video/zoran/zoran_card.c
index 0aac376c3f7..9cdc3bb15b1 100644
--- a/drivers/media/video/zoran/zoran_card.c
+++ b/drivers/media/video/zoran/zoran_card.c
@@ -943,7 +943,7 @@ zoran_open_init_params (struct zoran *zr)
 	memset(zr->jpg_settings.jpg_comp.COM_data, 0,
 	       sizeof(zr->jpg_settings.jpg_comp.COM_data));
 	zr->jpg_settings.jpg_comp.jpeg_markers =
-	    JPEG_MARKER_DHT | JPEG_MARKER_DQT;
+	    V4L2_JPEG_MARKER_DHT | V4L2_JPEG_MARKER_DQT;
 	i = zoran_check_jpg_settings(zr, &zr->jpg_settings, 0);
 	if (i)
 		dprintk(1, KERN_ERR "%s: %s internal error\n",
@@ -1227,6 +1227,7 @@ static int __devinit zoran_probe(struct pci_dev *pdev,
 	snprintf(ZR_DEVNAME(zr), sizeof(ZR_DEVNAME(zr)), "MJPEG[%u]", zr->id);
 	spin_lock_init(&zr->spinlock);
 	mutex_init(&zr->resource_lock);
+	mutex_init(&zr->other_lock);
 	if (pci_enable_device(pdev))
 		goto zr_unreg;
 	pci_read_config_byte(zr->pci_dev, PCI_CLASS_REVISION, &zr->revision);
@@ -1342,13 +1343,12 @@ static int __devinit zoran_probe(struct pci_dev *pdev,
 	}
 
 	zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
-		&zr->i2c_adapter, NULL, zr->card.i2c_decoder,
+		&zr->i2c_adapter, zr->card.i2c_decoder,
 		0, zr->card.addrs_decoder);
 
 	if (zr->card.i2c_encoder)
 		zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
-			&zr->i2c_adapter,
-			NULL, zr->card.i2c_encoder,
+			&zr->i2c_adapter, zr->card.i2c_encoder,
 			0, zr->card.addrs_encoder);
 
 	dprintk(2,
diff --git a/drivers/media/video/zoran/zoran_device.c b/drivers/media/video/zoran/zoran_device.c
index b02007e4215..e8a27844bf3 100644
--- a/drivers/media/video/zoran/zoran_device.c
+++ b/drivers/media/video/zoran/zoran_device.c
@@ -1523,7 +1523,7 @@ zoran_irq (int             irq,
 		    zr->JPEG_missed > 25 ||
 		    zr->JPEG_error == 1	||
 		    ((zr->codec_mode == BUZ_MODE_MOTION_DECOMPRESS) &&
-		     (zr->frame_num & (zr->JPEG_missed > zr->jpg_settings.field_per_buff)))) {
+		     (zr->frame_num && (zr->JPEG_missed > zr->jpg_settings.field_per_buff)))) {
 			error_handler(zr, astat, stat);
 		}
 
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 401082b853f..7c3921de958 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -49,7 +49,6 @@
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/pci.h>
 #include <linux/vmalloc.h>
 #include <linux/wait.h>
@@ -913,7 +912,7 @@ static int zoran_open(struct file *file)
 	dprintk(2, KERN_INFO "%s: %s(%s, pid=[%d]), users(-)=%d\n",
 		ZR_DEVNAME(zr), __func__, current->comm, task_pid_nr(current), zr->user + 1);
 
-	lock_kernel();
+	mutex_lock(&zr->other_lock);
 
 	if (zr->user >= 2048) {
 		dprintk(1, KERN_ERR "%s: too many users (%d) on device\n",
@@ -963,14 +962,14 @@ static int zoran_open(struct file *file)
 	file->private_data = fh;
 	fh->zr = zr;
 	zoran_open_init_session(fh);
-	unlock_kernel();
+	mutex_unlock(&zr->other_lock);
 
 	return 0;
 
 fail_fh:
 	kfree(fh);
 fail_unlock:
-	unlock_kernel();
+	mutex_unlock(&zr->other_lock);
 
 	dprintk(2, KERN_INFO "%s: open failed (%d), users(-)=%d\n",
 		ZR_DEVNAME(zr), res, zr->user);
@@ -989,7 +988,7 @@ zoran_close(struct file  *file)
 
 	/* kernel locks (fs/device.c), so don't do that ourselves
 	 * (prevents deadlocks) */
-	/*mutex_lock(&zr->resource_lock);*/
+	mutex_lock(&zr->other_lock);
 
 	zoran_close_end_session(fh);
 
@@ -1023,6 +1022,7 @@ zoran_close(struct file  *file)
 			encoder_call(zr, video, s_routing, 2, 0, 0);
 		}
 	}
+	mutex_unlock(&zr->other_lock);
 
 	file->private_data = NULL;
 	kfree(fh->overlay_mask);
@@ -1528,323 +1528,6 @@ zoran_set_input (struct zoran *zr,
  *   ioctl routine
  */
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static long zoran_default(struct file *file, void *__fh, int cmd, void *arg)
-{
-	struct zoran_fh *fh = __fh;
-	struct zoran *zr = fh->zr;
-	struct zoran_jpg_settings settings;
-
-	switch (cmd) {
-	case BUZIOC_G_PARAMS:
-	{
-		struct zoran_params *bparams = arg;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_G_PARAMS\n", ZR_DEVNAME(zr));
-
-		memset(bparams, 0, sizeof(struct zoran_params));
-		bparams->major_version = MAJOR_VERSION;
-		bparams->minor_version = MINOR_VERSION;
-
-		mutex_lock(&zr->resource_lock);
-
-		if (zr->norm & V4L2_STD_NTSC)
-			bparams->norm = ZORAN_VIDMODE_NTSC;
-		else if (zr->norm & V4L2_STD_SECAM)
-			bparams->norm = ZORAN_VIDMODE_SECAM;
-		else
-			bparams->norm = ZORAN_VIDMODE_PAL;
-
-		bparams->input = zr->input;
-
-		bparams->decimation = fh->jpg_settings.decimation;
-		bparams->HorDcm = fh->jpg_settings.HorDcm;
-		bparams->VerDcm = fh->jpg_settings.VerDcm;
-		bparams->TmpDcm = fh->jpg_settings.TmpDcm;
-		bparams->field_per_buff = fh->jpg_settings.field_per_buff;
-		bparams->img_x = fh->jpg_settings.img_x;
-		bparams->img_y = fh->jpg_settings.img_y;
-		bparams->img_width = fh->jpg_settings.img_width;
-		bparams->img_height = fh->jpg_settings.img_height;
-		bparams->odd_even = fh->jpg_settings.odd_even;
-
-		bparams->quality = fh->jpg_settings.jpg_comp.quality;
-		bparams->APPn = fh->jpg_settings.jpg_comp.APPn;
-		bparams->APP_len = fh->jpg_settings.jpg_comp.APP_len;
-		memcpy(bparams->APP_data,
-		       fh->jpg_settings.jpg_comp.APP_data,
-		       sizeof(bparams->APP_data));
-		bparams->COM_len = zr->jpg_settings.jpg_comp.COM_len;
-		memcpy(bparams->COM_data,
-		       fh->jpg_settings.jpg_comp.COM_data,
-		       sizeof(bparams->COM_data));
-		bparams->jpeg_markers =
-		    fh->jpg_settings.jpg_comp.jpeg_markers;
-
-		mutex_unlock(&zr->resource_lock);
-
-		bparams->VFIFO_FB = 0;
-
-		return 0;
-	}
-
-	case BUZIOC_S_PARAMS:
-	{
-		struct zoran_params *bparams = arg;
-		int res = 0;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_S_PARAMS\n", ZR_DEVNAME(zr));
-
-		settings.decimation = bparams->decimation;
-		settings.HorDcm = bparams->HorDcm;
-		settings.VerDcm = bparams->VerDcm;
-		settings.TmpDcm = bparams->TmpDcm;
-		settings.field_per_buff = bparams->field_per_buff;
-		settings.img_x = bparams->img_x;
-		settings.img_y = bparams->img_y;
-		settings.img_width = bparams->img_width;
-		settings.img_height = bparams->img_height;
-		settings.odd_even = bparams->odd_even;
-
-		settings.jpg_comp.quality = bparams->quality;
-		settings.jpg_comp.APPn = bparams->APPn;
-		settings.jpg_comp.APP_len = bparams->APP_len;
-		memcpy(settings.jpg_comp.APP_data, bparams->APP_data,
-		       sizeof(bparams->APP_data));
-		settings.jpg_comp.COM_len = bparams->COM_len;
-		memcpy(settings.jpg_comp.COM_data, bparams->COM_data,
-		       sizeof(bparams->COM_data));
-		settings.jpg_comp.jpeg_markers = bparams->jpeg_markers;
-
-		mutex_lock(&zr->resource_lock);
-
-		if (zr->codec_mode != BUZ_MODE_IDLE) {
-			dprintk(1,
-				KERN_ERR
-				"%s: BUZIOC_S_PARAMS called, but Buz in capture/playback mode\n",
-				ZR_DEVNAME(zr));
-			res = -EINVAL;
-			goto sparams_unlock_and_return;
-		}
-
-		/* Check the params first before overwriting our
-		 * nternal values */
-		if (zoran_check_jpg_settings(zr, &settings, 0)) {
-			res = -EINVAL;
-			goto sparams_unlock_and_return;
-		}
-
-		fh->jpg_settings = settings;
-sparams_unlock_and_return:
-		mutex_unlock(&zr->resource_lock);
-
-		return res;
-	}
-
-	case BUZIOC_REQBUFS:
-	{
-		struct zoran_requestbuffers *breq = arg;
-		int res = 0;
-
-		dprintk(3,
-			KERN_DEBUG
-			"%s: BUZIOC_REQBUFS - count=%lu, size=%lu\n",
-			ZR_DEVNAME(zr), breq->count, breq->size);
-
-		/* Enforce reasonable lower and upper limits */
-		if (breq->count < 4)
-			breq->count = 4;	/* Could be choosen smaller */
-		if (breq->count > jpg_nbufs)
-			breq->count = jpg_nbufs;
-		breq->size = PAGE_ALIGN(breq->size);
-		if (breq->size < 8192)
-			breq->size = 8192;	/* Arbitrary */
-		/* breq->size is limited by 1 page for the stat_com
-		 * tables to a Maximum of 2 MB */
-		if (breq->size > jpg_bufsize)
-			breq->size = jpg_bufsize;
-
-		mutex_lock(&zr->resource_lock);
-
-		if (fh->buffers.allocated) {
-			dprintk(1,
-				KERN_ERR
-				"%s: BUZIOC_REQBUFS - buffers already allocated\n",
-				ZR_DEVNAME(zr));
-			res = -EBUSY;
-			goto jpgreqbuf_unlock_and_return;
-		}
-
-		/* The next mmap will map the MJPEG buffers - could
-		 * also be *_PLAY, but it doesn't matter here */
-		map_mode_jpg(fh, 0);
-		fh->buffers.num_buffers = breq->count;
-		fh->buffers.buffer_size = breq->size;
-
-		if (jpg_fbuffer_alloc(fh)) {
-			res = -ENOMEM;
-			goto jpgreqbuf_unlock_and_return;
-		}
-
-jpgreqbuf_unlock_and_return:
-		mutex_unlock(&zr->resource_lock);
-
-		return res;
-	}
-
-	case BUZIOC_QBUF_CAPT:
-	{
-		int *frame = arg, res;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_QBUF_CAPT - frame=%d\n",
-			ZR_DEVNAME(zr), *frame);
-
-		mutex_lock(&zr->resource_lock);
-		res = jpg_qbuf(fh, *frame, BUZ_MODE_MOTION_COMPRESS);
-		mutex_unlock(&zr->resource_lock);
-
-		return res;
-	}
-
-	case BUZIOC_QBUF_PLAY:
-	{
-		int *frame = arg, res;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_QBUF_PLAY - frame=%d\n",
-			ZR_DEVNAME(zr), *frame);
-
-		mutex_lock(&zr->resource_lock);
-		res = jpg_qbuf(fh, *frame, BUZ_MODE_MOTION_DECOMPRESS);
-		mutex_unlock(&zr->resource_lock);
-
-		return res;
-	}
-
-	case BUZIOC_SYNC:
-	{
-		struct zoran_sync *bsync = arg;
-		int res;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_SYNC\n", ZR_DEVNAME(zr));
-
-		mutex_lock(&zr->resource_lock);
-
-		if (fh->map_mode == ZORAN_MAP_MODE_RAW) {
-			dprintk(2, KERN_WARNING
-				"%s: %s - not in jpg capture mode\n",
-				ZR_DEVNAME(zr), __func__);
-			res = -EINVAL;
-		} else {
-			res = jpg_sync(fh, bsync);
-		}
-		mutex_unlock(&zr->resource_lock);
-
-		return res;
-	}
-
-	case BUZIOC_G_STATUS:
-	{
-		struct zoran_status *bstat = arg;
-		int status = 0, res = 0;
-		v4l2_std_id norm;
-
-		dprintk(3, KERN_DEBUG "%s: BUZIOC_G_STATUS\n", ZR_DEVNAME(zr));
-
-		if (zr->codec_mode != BUZ_MODE_IDLE) {
-			dprintk(1,
-				KERN_ERR
-				"%s: BUZIOC_G_STATUS called but Buz in capture/playback mode\n",
-				ZR_DEVNAME(zr));
-			return -EINVAL;
-		}
-
-		mutex_lock(&zr->resource_lock);
-
-		if (zr->codec_mode != BUZ_MODE_IDLE) {
-			dprintk(1,
-				KERN_ERR
-				"%s: BUZIOC_G_STATUS called, but Buz in capture/playback mode\n",
-				ZR_DEVNAME(zr));
-			res = -EINVAL;
-			goto gstat_unlock_and_return;
-		}
-
-		decoder_call(zr, video, s_routing,
-				zr->card.input[bstat->input].muxsel, 0, 0);
-
-		/* sleep 1 second */
-		ssleep(1);
-
-		/* Get status of video decoder */
-		decoder_call(zr, video, querystd, &norm);
-		decoder_call(zr, video, g_input_status, &status);
-
-		/* restore previous input and norm */
-		decoder_call(zr, video, s_routing,
-				zr->card.input[zr->input].muxsel, 0, 0);
-gstat_unlock_and_return:
-		mutex_unlock(&zr->resource_lock);
-
-		if (!res) {
-			bstat->signal =
-			    (status & V4L2_IN_ST_NO_SIGNAL) ? 0 : 1;
-			if (norm & V4L2_STD_NTSC)
-				bstat->norm = ZORAN_VIDMODE_NTSC;
-			else if (norm & V4L2_STD_SECAM)
-				bstat->norm = ZORAN_VIDMODE_SECAM;
-			else
-				bstat->norm = ZORAN_VIDMODE_PAL;
-
-			bstat->color =
-			    (status & V4L2_IN_ST_NO_COLOR) ? 0 : 1;
-		}
-
-		return res;
-	}
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static int zoran_vidiocgmbuf(struct file *file, void *__fh, struct video_mbuf *vmbuf)
-{
-	struct zoran_fh *fh = __fh;
-	struct zoran *zr = fh->zr;
-	int i, res = 0;
-
-
-	mutex_lock(&zr->resource_lock);
-
-	if (fh->buffers.allocated) {
-		dprintk(1,
-			KERN_ERR
-			"%s: VIDIOCGMBUF - buffers already allocated\n",
-			ZR_DEVNAME(zr));
-		res = -EINVAL;
-		goto v4l1reqbuf_unlock_and_return;
-	}
-
-	/* The next mmap will map the V4L buffers */
-	map_mode_raw(fh);
-
-	if (v4l_fbuffer_alloc(fh)) {
-		res = -ENOMEM;
-		goto v4l1reqbuf_unlock_and_return;
-	}
-
-	vmbuf->size = fh->buffers.num_buffers * fh->buffers.buffer_size;
-	vmbuf->frames = fh->buffers.num_buffers;
-	for (i = 0; i < vmbuf->frames; i++)
-		vmbuf->offsets[i] = i * fh->buffers.buffer_size;
-
-v4l1reqbuf_unlock_and_return:
-	mutex_unlock(&zr->resource_lock);
-
-	return res;
-}
-#endif
-
 static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability *cap)
 {
 	struct zoran_fh *fh = __fh;
@@ -2533,6 +2216,7 @@ static int zoran_dqbuf(struct file *file, void *__fh, struct v4l2_buffer *buf)
 			res = -EAGAIN;
 			goto dqbuf_unlock_and_return;
 		}
+		bs.frame = 0; /* suppress compiler warning */
 		res = jpg_sync(fh, &bs);
 		if (res)
 			goto dqbuf_unlock_and_return;
@@ -2766,11 +2450,6 @@ static int zoran_enum_input(struct file *file, void *__fh,
 
 	if (inp->index >= zr->card.inputs)
 		return -EINVAL;
-	else {
-		int id = inp->index;
-		memset(inp, 0, sizeof(*inp));
-		inp->index = id;
-	}
 
 	strncpy(inp->name, zr->card.input[inp->index].name,
 		sizeof(inp->name) - 1);
@@ -2820,7 +2499,6 @@ static int zoran_enum_output(struct file *file, void *__fh,
 	if (outp->index != 0)
 		return -EINVAL;
 
-	memset(outp, 0, sizeof(*outp));
 	outp->index = 0;
 	outp->type = V4L2_OUTPUT_TYPE_ANALOGVGAOVERLAY;
 	strncpy(outp->name, "Autodetect", sizeof(outp->name)-1);
@@ -3364,17 +3042,28 @@ static const struct v4l2_ioctl_ops zoran_ioctl_ops = {
 	.vidioc_queryctrl 		    = zoran_queryctrl,
 	.vidioc_s_ctrl       		    = zoran_s_ctrl,
 	.vidioc_g_ctrl       		    = zoran_g_ctrl,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidioc_default 		    = zoran_default,
-	.vidiocgmbuf 			    = zoran_vidiocgmbuf,
-#endif
 };
 
+/* please use zr->resource_lock consistently and kill this wrapper */
+static long zoran_ioctl(struct file *file, unsigned int cmd,
+			unsigned long arg)
+{
+	struct zoran_fh *fh = file->private_data;
+	struct zoran *zr = fh->zr;
+	int ret;
+
+	mutex_lock(&zr->other_lock);
+	ret = video_ioctl2(file, cmd, arg);
+	mutex_unlock(&zr->other_lock);
+
+	return ret;
+}
+
 static const struct v4l2_file_operations zoran_fops = {
 	.owner = THIS_MODULE,
 	.open = zoran_open,
 	.release = zoran_close,
-	.ioctl = video_ioctl2,
+	.unlocked_ioctl = zoran_ioctl,
 	.read = zoran_read,
 	.write = zoran_write,
 	.mmap = zoran_mmap,
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index e15220ff52f..d784c36707c 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -97,8 +97,7 @@ static u8	mptfcInternalCtx = MPT_MAX_PROTOCOL_DRIVERS;
 
 static int mptfc_target_alloc(struct scsi_target *starget);
 static int mptfc_slave_alloc(struct scsi_device *sdev);
-static int mptfc_qcmd(struct scsi_cmnd *SCpnt,
-		      void (*done)(struct scsi_cmnd *));
+static int mptfc_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *SCpnt);
 static void mptfc_target_destroy(struct scsi_target *starget);
 static void mptfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout);
 static void __devexit mptfc_remove(struct pci_dev *pdev);
@@ -650,7 +649,7 @@ mptfc_slave_alloc(struct scsi_device *sdev)
 }
 
 static int
-mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+mptfc_qcmd_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	struct mptfc_rport_info	*ri;
 	struct fc_rport	*rport = starget_to_rport(scsi_target(SCpnt->device));
@@ -681,6 +680,8 @@ mptfc_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	return mptscsih_qcmd(SCpnt,done);
 }
 
+static DEF_SCSI_QCMD(mptfc_qcmd)
+
 /*
  *	mptfc_display_port_link_speed - displaying link speed
  *	@ioc: Pointer to MPT_ADAPTER structure
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 83a5115f025..d48c2c6058e 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1889,7 +1889,7 @@ mptsas_slave_alloc(struct scsi_device *sdev)
 }
 
 static int
-mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+mptsas_qcmd_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	MPT_SCSI_HOST	*hd;
 	MPT_ADAPTER	*ioc;
@@ -1913,6 +1913,8 @@ mptsas_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	return mptscsih_qcmd(SCpnt,done);
 }
 
+static DEF_SCSI_QCMD(mptsas_qcmd)
+
 /**
  *	mptsas_mptsas_eh_timed_out - resets the scsi_cmnd timeout
  *		if the device under question is currently in the
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 0e2803155ae..6d9568d2ec5 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -780,7 +780,7 @@ static int mptspi_slave_configure(struct scsi_device *sdev)
 }
 
 static int
-mptspi_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+mptspi_qcmd_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	struct _MPT_SCSI_HOST *hd = shost_priv(SCpnt->device->host);
 	VirtDevice	*vdevice = SCpnt->device->hostdata;
@@ -805,6 +805,8 @@ mptspi_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	return mptscsih_qcmd(SCpnt,done);
 }
 
+static DEF_SCSI_QCMD(mptspi_qcmd)
+
 static void mptspi_slave_destroy(struct scsi_device *sdev)
 {
 	struct scsi_target *starget = scsi_target(sdev);
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index ea6b2197da8..97bdf82ec90 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -506,7 +506,7 @@ static struct i2o_driver i2o_scsi_driver = {
  *	Locks: takes the controller lock on error path only
  */
 
-static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
+static int i2o_scsi_queuecommand_lck(struct scsi_cmnd *SCpnt,
 				 void (*done) (struct scsi_cmnd *))
 {
 	struct i2o_controller *c;
@@ -688,7 +688,9 @@ static int i2o_scsi_queuecommand(struct scsi_cmnd *SCpnt,
 
       exit:
 	return rc;
-};
+}
+
+static DEF_SCSI_QCMD(i2o_scsi_queuecommand)
 
 /**
  *	i2o_scsi_abort - abort a running command
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3a1493b8b5e..da9d2971102 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -218,12 +218,12 @@ config MFD_STMPE
 		Keypad: stmpe-keypad
 		Touchscreen: stmpe-ts
 
-config MFD_TC35892
-	bool "Support Toshiba TC35892"
+config MFD_TC3589X
+	bool "Support Toshiba TC35892 and variants"
 	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	help
-	  Support for the Toshiba TC35892 I/O Expander.
+	  Support for the Toshiba TC35892 and variants I/O Expander.
 
 	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the
@@ -606,6 +606,16 @@ config MFD_VX855
 	  VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
 	  and/or vx855_gpio drivers for this to do anything useful.
 
+config MFD_WL1273_CORE
+	tristate
+	depends on I2C
+	select MFD_CORE
+	default n
+	help
+	  This is the core driver for the TI WL1273 FM radio. This MFD
+	  driver connects the radio-wl1273 V4L2 module and the wl1273
+	  audio codec.
+
 endif # MFD_SUPPORT
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f54b3659abb..848e7eac75a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -16,7 +16,7 @@ obj-$(CONFIG_MFD_DAVINCI_VOICECODEC)	+= davinci_voicecodec.o
 obj-$(CONFIG_MFD_DM355EVM_MSP)	+= dm355evm_msp.o
 
 obj-$(CONFIG_MFD_STMPE)		+= stmpe.o
-obj-$(CONFIG_MFD_TC35892)	+= tc35892.o
+obj-$(CONFIG_MFD_TC3589X)	+= tc3589x.o
 obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o tmio_core.o
 obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o tmio_core.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o tmio_core.o
@@ -81,3 +81,4 @@ obj-$(CONFIG_MFD_JANZ_CMODIO)	+= janz-cmodio.o
 obj-$(CONFIG_MFD_JZ4740_ADC)	+= jz4740-adc.o
 obj-$(CONFIG_MFD_TPS6586X)	+= tps6586x.o
 obj-$(CONFIG_MFD_VX855)		+= vx855.o
+obj-$(CONFIG_MFD_WL1273_CORE)	+= wl1273-core.o
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index dbe1c93c1af..d9640a623ff 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -303,7 +303,7 @@ static irqreturn_t ab8500_irq(int irq, void *dev)
 			continue;
 
 		do {
-			int bit = __ffs(status);
+			int bit = __ffs(value);
 			int line = i * 8 + bit;
 
 			handle_nested_irq(ab8500->irq_base + line);
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 4ba85bbdb4c..9cee8e7f0bc 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -1259,7 +1259,7 @@ static int menelaus_probe(struct i2c_client *client,
 	return 0;
 fail2:
 	free_irq(client->irq, menelaus);
-	flush_scheduled_work();
+	flush_work_sync(&menelaus->work);
 fail1:
 	kfree(menelaus);
 	return err;
@@ -1270,6 +1270,7 @@ static int __exit menelaus_remove(struct i2c_client *client)
 	struct menelaus_chip	*menelaus = i2c_get_clientdata(client);
 
 	free_irq(client->irq, menelaus);
+	flush_work_sync(&menelaus->work);
 	kfree(menelaus);
 	the_menelaus = NULL;
 	return 0;
diff --git a/drivers/mfd/tc35892.c b/drivers/mfd/tc35892.c
deleted file mode 100644
index e619e2a5599..00000000000
--- a/drivers/mfd/tc35892.c
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License, version 2
- * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/mfd/core.h>
-#include <linux/mfd/tc35892.h>
-
-/**
- * tc35892_reg_read() - read a single TC35892 register
- * @tc35892:	Device to read from
- * @reg:	Register to read
- */
-int tc35892_reg_read(struct tc35892 *tc35892, u8 reg)
-{
-	int ret;
-
-	ret = i2c_smbus_read_byte_data(tc35892->i2c, reg);
-	if (ret < 0)
-		dev_err(tc35892->dev, "failed to read reg %#x: %d\n",
-			reg, ret);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(tc35892_reg_read);
-
-/**
- * tc35892_reg_read() - write a single TC35892 register
- * @tc35892:	Device to write to
- * @reg:	Register to read
- * @data:	Value to write
- */
-int tc35892_reg_write(struct tc35892 *tc35892, u8 reg, u8 data)
-{
-	int ret;
-
-	ret = i2c_smbus_write_byte_data(tc35892->i2c, reg, data);
-	if (ret < 0)
-		dev_err(tc35892->dev, "failed to write reg %#x: %d\n",
-			reg, ret);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(tc35892_reg_write);
-
-/**
- * tc35892_block_read() - read multiple TC35892 registers
- * @tc35892:	Device to read from
- * @reg:	First register
- * @length:	Number of registers
- * @values:	Buffer to write to
- */
-int tc35892_block_read(struct tc35892 *tc35892, u8 reg, u8 length, u8 *values)
-{
-	int ret;
-
-	ret = i2c_smbus_read_i2c_block_data(tc35892->i2c, reg, length, values);
-	if (ret < 0)
-		dev_err(tc35892->dev, "failed to read regs %#x: %d\n",
-			reg, ret);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(tc35892_block_read);
-
-/**
- * tc35892_block_write() - write multiple TC35892 registers
- * @tc35892:	Device to write to
- * @reg:	First register
- * @length:	Number of registers
- * @values:	Values to write
- */
-int tc35892_block_write(struct tc35892 *tc35892, u8 reg, u8 length,
-			const u8 *values)
-{
-	int ret;
-
-	ret = i2c_smbus_write_i2c_block_data(tc35892->i2c, reg, length,
-					     values);
-	if (ret < 0)
-		dev_err(tc35892->dev, "failed to write regs %#x: %d\n",
-			reg, ret);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(tc35892_block_write);
-
-/**
- * tc35892_set_bits() - set the value of a bitfield in a TC35892 register
- * @tc35892:	Device to write to
- * @reg:	Register to write
- * @mask:	Mask of bits to set
- * @values:	Value to set
- */
-int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val)
-{
-	int ret;
-
-	mutex_lock(&tc35892->lock);
-
-	ret = tc35892_reg_read(tc35892, reg);
-	if (ret < 0)
-		goto out;
-
-	ret &= ~mask;
-	ret |= val;
-
-	ret = tc35892_reg_write(tc35892, reg, ret);
-
-out:
-	mutex_unlock(&tc35892->lock);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(tc35892_set_bits);
-
-static struct resource gpio_resources[] = {
-	{
-		.start	= TC35892_INT_GPIIRQ,
-		.end	= TC35892_INT_GPIIRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mfd_cell tc35892_devs[] = {
-	{
-		.name		= "tc35892-gpio",
-		.num_resources	= ARRAY_SIZE(gpio_resources),
-		.resources	= &gpio_resources[0],
-	},
-};
-
-static irqreturn_t tc35892_irq(int irq, void *data)
-{
-	struct tc35892 *tc35892 = data;
-	int status;
-
-	status = tc35892_reg_read(tc35892, TC35892_IRQST);
-	if (status < 0)
-		return IRQ_NONE;
-
-	while (status) {
-		int bit = __ffs(status);
-
-		handle_nested_irq(tc35892->irq_base + bit);
-		status &= ~(1 << bit);
-	}
-
-	/*
-	 * A dummy read or write (to any register) appears to be necessary to
-	 * have the last interrupt clear (for example, GPIO IC write) take
-	 * effect.
-	 */
-	tc35892_reg_read(tc35892, TC35892_IRQST);
-
-	return IRQ_HANDLED;
-}
-
-static void tc35892_irq_dummy(unsigned int irq)
-{
-	/* No mask/unmask at this level */
-}
-
-static struct irq_chip tc35892_irq_chip = {
-	.name	= "tc35892",
-	.mask	= tc35892_irq_dummy,
-	.unmask	= tc35892_irq_dummy,
-};
-
-static int tc35892_irq_init(struct tc35892 *tc35892)
-{
-	int base = tc35892->irq_base;
-	int irq;
-
-	for (irq = base; irq < base + TC35892_NR_INTERNAL_IRQS; irq++) {
-		set_irq_chip_data(irq, tc35892);
-		set_irq_chip_and_handler(irq, &tc35892_irq_chip,
-					 handle_edge_irq);
-		set_irq_nested_thread(irq, 1);
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, IRQF_VALID);
-#else
-		set_irq_noprobe(irq);
-#endif
-	}
-
-	return 0;
-}
-
-static void tc35892_irq_remove(struct tc35892 *tc35892)
-{
-	int base = tc35892->irq_base;
-	int irq;
-
-	for (irq = base; irq < base + TC35892_NR_INTERNAL_IRQS; irq++) {
-#ifdef CONFIG_ARM
-		set_irq_flags(irq, 0);
-#endif
-		set_irq_chip_and_handler(irq, NULL, NULL);
-		set_irq_chip_data(irq, NULL);
-	}
-}
-
-static int tc35892_chip_init(struct tc35892 *tc35892)
-{
-	int manf, ver, ret;
-
-	manf = tc35892_reg_read(tc35892, TC35892_MANFCODE);
-	if (manf < 0)
-		return manf;
-
-	ver = tc35892_reg_read(tc35892, TC35892_VERSION);
-	if (ver < 0)
-		return ver;
-
-	if (manf != TC35892_MANFCODE_MAGIC) {
-		dev_err(tc35892->dev, "unknown manufacturer: %#x\n", manf);
-		return -EINVAL;
-	}
-
-	dev_info(tc35892->dev, "manufacturer: %#x, version: %#x\n", manf, ver);
-
-	/* Put everything except the IRQ module into reset */
-	ret = tc35892_reg_write(tc35892, TC35892_RSTCTRL,
-				TC35892_RSTCTRL_TIMRST
-				| TC35892_RSTCTRL_ROTRST
-				| TC35892_RSTCTRL_KBDRST
-				| TC35892_RSTCTRL_GPIRST);
-	if (ret < 0)
-		return ret;
-
-	/* Clear the reset interrupt. */
-	return tc35892_reg_write(tc35892, TC35892_RSTINTCLR, 0x1);
-}
-
-static int __devinit tc35892_probe(struct i2c_client *i2c,
-				   const struct i2c_device_id *id)
-{
-	struct tc35892_platform_data *pdata = i2c->dev.platform_data;
-	struct tc35892 *tc35892;
-	int ret;
-
-	if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA
-				     | I2C_FUNC_SMBUS_I2C_BLOCK))
-		return -EIO;
-
-	tc35892 = kzalloc(sizeof(struct tc35892), GFP_KERNEL);
-	if (!tc35892)
-		return -ENOMEM;
-
-	mutex_init(&tc35892->lock);
-
-	tc35892->dev = &i2c->dev;
-	tc35892->i2c = i2c;
-	tc35892->pdata = pdata;
-	tc35892->irq_base = pdata->irq_base;
-	tc35892->num_gpio = id->driver_data;
-
-	i2c_set_clientdata(i2c, tc35892);
-
-	ret = tc35892_chip_init(tc35892);
-	if (ret)
-		goto out_free;
-
-	ret = tc35892_irq_init(tc35892);
-	if (ret)
-		goto out_free;
-
-	ret = request_threaded_irq(tc35892->i2c->irq, NULL, tc35892_irq,
-				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-				   "tc35892", tc35892);
-	if (ret) {
-		dev_err(tc35892->dev, "failed to request IRQ: %d\n", ret);
-		goto out_removeirq;
-	}
-
-	ret = mfd_add_devices(tc35892->dev, -1, tc35892_devs,
-			      ARRAY_SIZE(tc35892_devs), NULL,
-			      tc35892->irq_base);
-	if (ret) {
-		dev_err(tc35892->dev, "failed to add children\n");
-		goto out_freeirq;
-	}
-
-	return 0;
-
-out_freeirq:
-	free_irq(tc35892->i2c->irq, tc35892);
-out_removeirq:
-	tc35892_irq_remove(tc35892);
-out_free:
-	kfree(tc35892);
-	return ret;
-}
-
-static int __devexit tc35892_remove(struct i2c_client *client)
-{
-	struct tc35892 *tc35892 = i2c_get_clientdata(client);
-
-	mfd_remove_devices(tc35892->dev);
-
-	free_irq(tc35892->i2c->irq, tc35892);
-	tc35892_irq_remove(tc35892);
-
-	kfree(tc35892);
-
-	return 0;
-}
-
-static const struct i2c_device_id tc35892_id[] = {
-	{ "tc35892", 24 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, tc35892_id);
-
-static struct i2c_driver tc35892_driver = {
-	.driver.name	= "tc35892",
-	.driver.owner	= THIS_MODULE,
-	.probe		= tc35892_probe,
-	.remove		= __devexit_p(tc35892_remove),
-	.id_table	= tc35892_id,
-};
-
-static int __init tc35892_init(void)
-{
-	return i2c_add_driver(&tc35892_driver);
-}
-subsys_initcall(tc35892_init);
-
-static void __exit tc35892_exit(void)
-{
-	i2c_del_driver(&tc35892_driver);
-}
-module_exit(tc35892_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("TC35892 MFD core driver");
-MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
new file mode 100644
index 00000000000..729dbeed2ce
--- /dev/null
+++ b/drivers/mfd/tc3589x.c
@@ -0,0 +1,422 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Hanumath Prasad <hanumath.prasad@stericsson.com> for ST-Ericsson
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tc3589x.h>
+
+#define TC3589x_CLKMODE_MODCTL_SLEEP		0x0
+#define TC3589x_CLKMODE_MODCTL_OPERATION	(1 << 0)
+
+/**
+ * tc3589x_reg_read() - read a single TC3589x register
+ * @tc3589x:	Device to read from
+ * @reg:	Register to read
+ */
+int tc3589x_reg_read(struct tc3589x *tc3589x, u8 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(tc3589x->i2c, reg);
+	if (ret < 0)
+		dev_err(tc3589x->dev, "failed to read reg %#x: %d\n",
+			reg, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tc3589x_reg_read);
+
+/**
+ * tc3589x_reg_read() - write a single TC3589x register
+ * @tc3589x:	Device to write to
+ * @reg:	Register to read
+ * @data:	Value to write
+ */
+int tc3589x_reg_write(struct tc3589x *tc3589x, u8 reg, u8 data)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(tc3589x->i2c, reg, data);
+	if (ret < 0)
+		dev_err(tc3589x->dev, "failed to write reg %#x: %d\n",
+			reg, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tc3589x_reg_write);
+
+/**
+ * tc3589x_block_read() - read multiple TC3589x registers
+ * @tc3589x:	Device to read from
+ * @reg:	First register
+ * @length:	Number of registers
+ * @values:	Buffer to write to
+ */
+int tc3589x_block_read(struct tc3589x *tc3589x, u8 reg, u8 length, u8 *values)
+{
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(tc3589x->i2c, reg, length, values);
+	if (ret < 0)
+		dev_err(tc3589x->dev, "failed to read regs %#x: %d\n",
+			reg, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tc3589x_block_read);
+
+/**
+ * tc3589x_block_write() - write multiple TC3589x registers
+ * @tc3589x:	Device to write to
+ * @reg:	First register
+ * @length:	Number of registers
+ * @values:	Values to write
+ */
+int tc3589x_block_write(struct tc3589x *tc3589x, u8 reg, u8 length,
+			const u8 *values)
+{
+	int ret;
+
+	ret = i2c_smbus_write_i2c_block_data(tc3589x->i2c, reg, length,
+					     values);
+	if (ret < 0)
+		dev_err(tc3589x->dev, "failed to write regs %#x: %d\n",
+			reg, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tc3589x_block_write);
+
+/**
+ * tc3589x_set_bits() - set the value of a bitfield in a TC3589x register
+ * @tc3589x:	Device to write to
+ * @reg:	Register to write
+ * @mask:	Mask of bits to set
+ * @values:	Value to set
+ */
+int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val)
+{
+	int ret;
+
+	mutex_lock(&tc3589x->lock);
+
+	ret = tc3589x_reg_read(tc3589x, reg);
+	if (ret < 0)
+		goto out;
+
+	ret &= ~mask;
+	ret |= val;
+
+	ret = tc3589x_reg_write(tc3589x, reg, ret);
+
+out:
+	mutex_unlock(&tc3589x->lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(tc3589x_set_bits);
+
+static struct resource gpio_resources[] = {
+	{
+		.start	= TC3589x_INT_GPIIRQ,
+		.end	= TC3589x_INT_GPIIRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource keypad_resources[] = {
+	{
+		.start  = TC3589x_INT_KBDIRQ,
+		.end    = TC3589x_INT_KBDIRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct mfd_cell tc3589x_dev_gpio[] = {
+	{
+		.name		= "tc3589x-gpio",
+		.num_resources	= ARRAY_SIZE(gpio_resources),
+		.resources	= &gpio_resources[0],
+	},
+};
+
+static struct mfd_cell tc3589x_dev_keypad[] = {
+	{
+		.name           = "tc3589x-keypad",
+		.num_resources  = ARRAY_SIZE(keypad_resources),
+		.resources      = &keypad_resources[0],
+	},
+};
+
+static irqreturn_t tc3589x_irq(int irq, void *data)
+{
+	struct tc3589x *tc3589x = data;
+	int status;
+
+again:
+	status = tc3589x_reg_read(tc3589x, TC3589x_IRQST);
+	if (status < 0)
+		return IRQ_NONE;
+
+	while (status) {
+		int bit = __ffs(status);
+
+		handle_nested_irq(tc3589x->irq_base + bit);
+		status &= ~(1 << bit);
+	}
+
+	/*
+	 * A dummy read or write (to any register) appears to be necessary to
+	 * have the last interrupt clear (for example, GPIO IC write) take
+	 * effect. In such a case, recheck for any interrupt which is still
+	 * pending.
+	 */
+	status = tc3589x_reg_read(tc3589x, TC3589x_IRQST);
+	if (status)
+		goto again;
+
+	return IRQ_HANDLED;
+}
+
+static int tc3589x_irq_init(struct tc3589x *tc3589x)
+{
+	int base = tc3589x->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + TC3589x_NR_INTERNAL_IRQS; irq++) {
+		set_irq_chip_data(irq, tc3589x);
+		set_irq_chip_and_handler(irq, &dummy_irq_chip,
+					 handle_edge_irq);
+		set_irq_nested_thread(irq, 1);
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, IRQF_VALID);
+#else
+		set_irq_noprobe(irq);
+#endif
+	}
+
+	return 0;
+}
+
+static void tc3589x_irq_remove(struct tc3589x *tc3589x)
+{
+	int base = tc3589x->irq_base;
+	int irq;
+
+	for (irq = base; irq < base + TC3589x_NR_INTERNAL_IRQS; irq++) {
+#ifdef CONFIG_ARM
+		set_irq_flags(irq, 0);
+#endif
+		set_irq_chip_and_handler(irq, NULL, NULL);
+		set_irq_chip_data(irq, NULL);
+	}
+}
+
+static int tc3589x_chip_init(struct tc3589x *tc3589x)
+{
+	int manf, ver, ret;
+
+	manf = tc3589x_reg_read(tc3589x, TC3589x_MANFCODE);
+	if (manf < 0)
+		return manf;
+
+	ver = tc3589x_reg_read(tc3589x, TC3589x_VERSION);
+	if (ver < 0)
+		return ver;
+
+	if (manf != TC3589x_MANFCODE_MAGIC) {
+		dev_err(tc3589x->dev, "unknown manufacturer: %#x\n", manf);
+		return -EINVAL;
+	}
+
+	dev_info(tc3589x->dev, "manufacturer: %#x, version: %#x\n", manf, ver);
+
+	/*
+	 * Put everything except the IRQ module into reset;
+	 * also spare the GPIO module for any pin initialization
+	 * done during pre-kernel boot
+	 */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_RSTCTRL,
+				TC3589x_RSTCTRL_TIMRST
+				| TC3589x_RSTCTRL_ROTRST
+				| TC3589x_RSTCTRL_KBDRST);
+	if (ret < 0)
+		return ret;
+
+	/* Clear the reset interrupt. */
+	return tc3589x_reg_write(tc3589x, TC3589x_RSTINTCLR, 0x1);
+}
+
+static int __devinit tc3589x_device_init(struct tc3589x *tc3589x)
+{
+	int ret = 0;
+	unsigned int blocks = tc3589x->pdata->block;
+
+	if (blocks & TC3589x_BLOCK_GPIO) {
+		ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio,
+				ARRAY_SIZE(tc3589x_dev_gpio), NULL,
+				tc3589x->irq_base);
+		if (ret) {
+			dev_err(tc3589x->dev, "failed to add gpio child\n");
+			return ret;
+		}
+		dev_info(tc3589x->dev, "added gpio block\n");
+	}
+
+	if (blocks & TC3589x_BLOCK_KEYPAD) {
+		ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
+				ARRAY_SIZE(tc3589x_dev_keypad), NULL,
+				tc3589x->irq_base);
+		if (ret) {
+			dev_err(tc3589x->dev, "failed to keypad child\n");
+			return ret;
+		}
+		dev_info(tc3589x->dev, "added keypad block\n");
+	}
+
+	return ret;
+}
+
+static int __devinit tc3589x_probe(struct i2c_client *i2c,
+				   const struct i2c_device_id *id)
+{
+	struct tc3589x_platform_data *pdata = i2c->dev.platform_data;
+	struct tc3589x *tc3589x;
+	int ret;
+
+	if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA
+				     | I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -EIO;
+
+	tc3589x = kzalloc(sizeof(struct tc3589x), GFP_KERNEL);
+	if (!tc3589x)
+		return -ENOMEM;
+
+	mutex_init(&tc3589x->lock);
+
+	tc3589x->dev = &i2c->dev;
+	tc3589x->i2c = i2c;
+	tc3589x->pdata = pdata;
+	tc3589x->irq_base = pdata->irq_base;
+	tc3589x->num_gpio = id->driver_data;
+
+	i2c_set_clientdata(i2c, tc3589x);
+
+	ret = tc3589x_chip_init(tc3589x);
+	if (ret)
+		goto out_free;
+
+	ret = tc3589x_irq_init(tc3589x);
+	if (ret)
+		goto out_free;
+
+	ret = request_threaded_irq(tc3589x->i2c->irq, NULL, tc3589x_irq,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   "tc3589x", tc3589x);
+	if (ret) {
+		dev_err(tc3589x->dev, "failed to request IRQ: %d\n", ret);
+		goto out_removeirq;
+	}
+
+	ret = tc3589x_device_init(tc3589x);
+	if (ret) {
+		dev_err(tc3589x->dev, "failed to add child devices\n");
+		goto out_freeirq;
+	}
+
+	return 0;
+
+out_freeirq:
+	free_irq(tc3589x->i2c->irq, tc3589x);
+out_removeirq:
+	tc3589x_irq_remove(tc3589x);
+out_free:
+	kfree(tc3589x);
+	return ret;
+}
+
+static int __devexit tc3589x_remove(struct i2c_client *client)
+{
+	struct tc3589x *tc3589x = i2c_get_clientdata(client);
+
+	mfd_remove_devices(tc3589x->dev);
+
+	free_irq(tc3589x->i2c->irq, tc3589x);
+	tc3589x_irq_remove(tc3589x);
+
+	kfree(tc3589x);
+
+	return 0;
+}
+
+static int tc3589x_suspend(struct device *dev)
+{
+	struct tc3589x *tc3589x = dev_get_drvdata(dev);
+	struct i2c_client *client = tc3589x->i2c;
+	int ret = 0;
+
+	/* put the system to sleep mode */
+	if (!device_may_wakeup(&client->dev))
+		ret = tc3589x_reg_write(tc3589x, TC3589x_CLKMODE,
+				TC3589x_CLKMODE_MODCTL_SLEEP);
+
+	return ret;
+}
+
+static int tc3589x_resume(struct device *dev)
+{
+	struct tc3589x *tc3589x = dev_get_drvdata(dev);
+	struct i2c_client *client = tc3589x->i2c;
+	int ret = 0;
+
+	/* enable the system into operation */
+	if (!device_may_wakeup(&client->dev))
+		ret = tc3589x_reg_write(tc3589x, TC3589x_CLKMODE,
+				TC3589x_CLKMODE_MODCTL_OPERATION);
+
+	return ret;
+}
+
+static const SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend,
+						tc3589x_resume);
+
+static const struct i2c_device_id tc3589x_id[] = {
+	{ "tc3589x", 24 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tc3589x_id);
+
+static struct i2c_driver tc3589x_driver = {
+	.driver.name	= "tc3589x",
+	.driver.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+	.driver.pm	= &tc3589x_dev_pm_ops,
+#endif
+	.probe		= tc3589x_probe,
+	.remove		= __devexit_p(tc3589x_remove),
+	.id_table	= tc3589x_id,
+};
+
+static int __init tc3589x_init(void)
+{
+	return i2c_add_driver(&tc3589x_driver);
+}
+subsys_initcall(tc3589x_init);
+
+static void __exit tc3589x_exit(void)
+{
+	i2c_del_driver(&tc3589x_driver);
+}
+module_exit(tc3589x_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TC3589x MFD core driver");
+MODULE_AUTHOR("Hanumath Prasad, Rabin Vincent");
diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c
index 727f62c15a6..6ad8a7f8d39 100644
--- a/drivers/mfd/timberdale.c
+++ b/drivers/mfd/timberdale.c
@@ -40,6 +40,7 @@
 #include <linux/spi/mc33880.h>
 
 #include <media/timb_radio.h>
+#include <media/timb_video.h>
 
 #include <linux/timb_dma.h>
 
@@ -246,7 +247,23 @@ static const __devinitconst struct resource timberdale_uartlite_resources[] = {
 	},
 };
 
-static const __devinitconst struct resource timberdale_radio_resources[] = {
+static __devinitdata struct i2c_board_info timberdale_adv7180_i2c_board_info = {
+	/* Requires jumper JP9 to be off */
+	I2C_BOARD_INFO("adv7180", 0x42 >> 1),
+	.irq = IRQ_TIMBERDALE_ADV7180
+};
+
+static __devinitdata struct timb_video_platform_data
+	timberdale_video_platform_data = {
+	.dma_channel = DMA_VIDEO_RX,
+	.i2c_adapter = 0,
+	.encoder = {
+		.info = &timberdale_adv7180_i2c_board_info
+	}
+};
+
+static const __devinitconst struct resource
+timberdale_radio_resources[] = {
 	{
 		.start	= RDSOFFSET,
 		.end	= RDSEND,
@@ -271,15 +288,25 @@ static __devinitdata struct timb_radio_platform_data
 	timberdale_radio_platform_data = {
 	.i2c_adapter = 0,
 	.tuner = {
-		.module_name = "tef6862",
 		.info = &timberdale_tef6868_i2c_board_info
 	},
 	.dsp = {
-		.module_name = "saa7706h",
 		.info = &timberdale_saa7706_i2c_board_info
 	}
 };
 
+static const __devinitconst struct resource timberdale_video_resources[] = {
+	{
+		.start	= LOGIWOFFSET,
+		.end	= LOGIWEND,
+		.flags	= IORESOURCE_MEM,
+	},
+	/*
+	note that the "frame buffer" is located in DMA area
+	starting at 0x1200000
+	*/
+};
+
 static __devinitdata struct timb_dma_platform_data timb_dma_platform_data = {
 	.nr_channels = 10,
 	.channels = {
@@ -380,6 +407,13 @@ static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg0[] = {
 		.data_size = sizeof(timberdale_gpio_platform_data),
 	},
 	{
+		.name = "timb-video",
+		.num_resources = ARRAY_SIZE(timberdale_video_resources),
+		.resources = timberdale_video_resources,
+		.platform_data = &timberdale_video_platform_data,
+		.data_size = sizeof(timberdale_video_platform_data),
+	},
+	{
 		.name = "timb-radio",
 		.num_resources = ARRAY_SIZE(timberdale_radio_resources),
 		.resources = timberdale_radio_resources,
@@ -440,6 +474,13 @@ static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg1[] = {
 		.resources = timberdale_mlogicore_resources,
 	},
 	{
+		.name = "timb-video",
+		.num_resources = ARRAY_SIZE(timberdale_video_resources),
+		.resources = timberdale_video_resources,
+		.platform_data = &timberdale_video_platform_data,
+		.data_size = sizeof(timberdale_video_platform_data),
+	},
+	{
 		.name = "timb-radio",
 		.num_resources = ARRAY_SIZE(timberdale_radio_resources),
 		.resources = timberdale_radio_resources,
@@ -490,6 +531,13 @@ static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg2[] = {
 		.data_size = sizeof(timberdale_gpio_platform_data),
 	},
 	{
+		.name = "timb-video",
+		.num_resources = ARRAY_SIZE(timberdale_video_resources),
+		.resources = timberdale_video_resources,
+		.platform_data = &timberdale_video_platform_data,
+		.data_size = sizeof(timberdale_video_platform_data),
+	},
+	{
 		.name = "timb-radio",
 		.num_resources = ARRAY_SIZE(timberdale_radio_resources),
 		.resources = timberdale_radio_resources,
@@ -533,6 +581,13 @@ static __devinitdata struct mfd_cell timberdale_cells_bar0_cfg3[] = {
 		.data_size = sizeof(timberdale_gpio_platform_data),
 	},
 	{
+		.name = "timb-video",
+		.num_resources = ARRAY_SIZE(timberdale_video_resources),
+		.resources = timberdale_video_resources,
+		.platform_data = &timberdale_video_platform_data,
+		.data_size = sizeof(timberdale_video_platform_data),
+	},
+	{
 		.name = "timb-radio",
 		.num_resources = ARRAY_SIZE(timberdale_radio_resources),
 		.resources = timberdale_radio_resources,
diff --git a/drivers/mfd/timberdale.h b/drivers/mfd/timberdale.h
index c11bf6ebfe0..4412acd826f 100644
--- a/drivers/mfd/timberdale.h
+++ b/drivers/mfd/timberdale.h
@@ -23,7 +23,7 @@
 #ifndef MFD_TIMBERDALE_H
 #define MFD_TIMBERDALE_H
 
-#define DRV_VERSION		"0.2"
+#define DRV_VERSION		"0.3"
 
 /* This driver only support versions >= 3.8 and < 4.0  */
 #define TIMB_SUPPORTED_MAJOR	3
diff --git a/drivers/mfd/tps65010.c b/drivers/mfd/tps65010.c
index d0016b67d12..90187fe33e0 100644
--- a/drivers/mfd/tps65010.c
+++ b/drivers/mfd/tps65010.c
@@ -242,7 +242,7 @@ static int dbg_show(struct seq_file *s, void *_)
 	seq_printf(s, "mask2     %s\n", buf);
 	/* ignore ackint2 */
 
-	(void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
+	schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
 
 
 	/* VMAIN voltage, enable lowpower, etc */
@@ -400,7 +400,7 @@ static void tps65010_interrupt(struct tps65010 *tps)
 			&& (tps->chgstatus & (TPS_CHG_USB|TPS_CHG_AC)))
 		poll = 1;
 	if (poll)
-		(void) schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
+		schedule_delayed_work(&tps->work, POWER_POLL_DELAY);
 
 	/* also potentially gpio-in rise or fall */
 }
@@ -410,7 +410,7 @@ static void tps65010_work(struct work_struct *work)
 {
 	struct tps65010		*tps;
 
-	tps = container_of(work, struct tps65010, work.work);
+	tps = container_of(to_delayed_work(work), struct tps65010, work);
 	mutex_lock(&tps->lock);
 
 	tps65010_interrupt(tps);
@@ -448,7 +448,7 @@ static irqreturn_t tps65010_irq(int irq, void *_tps)
 
 	disable_irq_nosync(irq);
 	set_bit(FLAG_IRQ_ENABLE, &tps->flags);
-	(void) schedule_work(&tps->work.work);
+	schedule_delayed_work(&tps->work, 0);
 	return IRQ_HANDLED;
 }
 
@@ -527,8 +527,7 @@ static int __exit tps65010_remove(struct i2c_client *client)
 	}
 	if (client->irq > 0)
 		free_irq(client->irq, tps);
-	cancel_delayed_work(&tps->work);
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&tps->work);
 	debugfs_remove(tps->file);
 	kfree(tps);
 	the_tps = NULL;
@@ -720,7 +719,7 @@ int tps65010_set_vbus_draw(unsigned mA)
 			&& test_and_set_bit(
 				FLAG_VBUS_CHANGED, &the_tps->flags)) {
 		/* gadget drivers call this in_irq() */
-		(void) schedule_work(&the_tps->work.work);
+		schedule_delayed_work(&the_tps->work, 0);
 	}
 	local_irq_restore(flags);
 
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 35275ba7096..12abd5b924b 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -95,7 +95,8 @@
 #define twl_has_rtc()	false
 #endif
 
-#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE)
+#if defined(CONFIG_TWL4030_USB) || defined(CONFIG_TWL4030_USB_MODULE) ||\
+	defined(CONFIG_TWL6030_USB) || defined(CONFIG_TWL6030_USB_MODULE)
 #define twl_has_usb()	true
 #else
 #define twl_has_usb()	false
@@ -682,6 +683,43 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			usb3v1.dev = child;
 		}
 	}
+	if (twl_has_usb() && pdata->usb && twl_class_is_6030()) {
+
+		static struct regulator_consumer_supply usb3v3 = {
+			.supply =	"vusb",
+		};
+
+		if (twl_has_regulator()) {
+			/* this is a template that gets copied */
+			struct regulator_init_data usb_fixed = {
+				.constraints.valid_modes_mask =
+					REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+				.constraints.valid_ops_mask =
+					REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+			};
+
+			child = add_regulator_linked(TWL6030_REG_VUSB,
+						      &usb_fixed, &usb3v3, 1);
+			if (IS_ERR(child))
+				return PTR_ERR(child);
+		}
+
+		child = add_child(0, "twl6030_usb",
+			pdata->usb, sizeof(*pdata->usb),
+			true,
+			/* irq1 = VBUS_PRES, irq0 = USB ID */
+			pdata->irq_base + USBOTG_INTR_OFFSET,
+			pdata->irq_base + USB_PRES_INTR_OFFSET);
+
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+		/* we need to connect regulators to this transceiver */
+		if (twl_has_regulator() && child)
+			usb3v3.dev = child;
+
+	}
 
 	if (twl_has_watchdog()) {
 		child = add_child(0, "twl4030_wdt", NULL, 0, false, 0, 0);
@@ -815,10 +853,6 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 		if (IS_ERR(child))
 			return PTR_ERR(child);
 
-		child = add_regulator(TWL6030_REG_VUSB, pdata->vusb);
-		if (IS_ERR(child))
-			return PTR_ERR(child);
-
 		child = add_regulator(TWL6030_REG_VAUX1_6030, pdata->vaux1);
 		if (IS_ERR(child))
 			return PTR_ERR(child);
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index aaedb11d9d2..06c8955907e 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -74,7 +74,7 @@ static int twl6030_interrupt_mapping[24] = {
 	USBOTG_INTR_OFFSET,	/* Bit 16	ID_WKUP			*/
 	USBOTG_INTR_OFFSET,	/* Bit 17	VBUS_WKUP		*/
 	USBOTG_INTR_OFFSET,	/* Bit 18	ID			*/
-	USBOTG_INTR_OFFSET,	/* Bit 19	VBUS			*/
+	USB_PRES_INTR_OFFSET,	/* Bit 19	VBUS			*/
 	CHARGER_INTR_OFFSET,	/* Bit 20	CHRG_CTRL		*/
 	CHARGER_INTR_OFFSET,	/* Bit 21	EXT_CHRG		*/
 	CHARGER_INTR_OFFSET,	/* Bit 22	INT_CHRG		*/
@@ -128,6 +128,13 @@ static int twl6030_irq_thread(void *data)
 
 		sts.bytes[3] = 0; /* Only 24 bits are valid*/
 
+		/*
+		 * Since VBUS status bit is not reliable for VBUS disconnect
+		 * use CHARGER VBUS detection status bit instead.
+		 */
+		if (sts.bytes[2] & 0x10)
+			sts.bytes[2] |= 0x08;
+
 		for (i = 0; sts.int_sts; sts.int_sts >>= 1, i++) {
 			local_irq_disable();
 			if (sts.int_sts & 0x1) {
diff --git a/drivers/mfd/wl1273-core.c b/drivers/mfd/wl1273-core.c
new file mode 100644
index 00000000000..d2ecc243573
--- /dev/null
+++ b/drivers/mfd/wl1273-core.c
@@ -0,0 +1,148 @@
+/*
+ * MFD driver for wl1273 FM radio and audio codec submodules.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Author: Matti Aaltonen <matti.j.aaltonen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/mfd/wl1273-core.h>
+#include <linux/slab.h>
+
+#define DRIVER_DESC "WL1273 FM Radio Core"
+
+static struct i2c_device_id wl1273_driver_id_table[] = {
+	{ WL1273_FM_DRIVER_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wl1273_driver_id_table);
+
+static int wl1273_core_remove(struct i2c_client *client)
+{
+	struct wl1273_core *core = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	mfd_remove_devices(&client->dev);
+	i2c_set_clientdata(client, NULL);
+	kfree(core);
+
+	return 0;
+}
+
+static int __devinit wl1273_core_probe(struct i2c_client *client,
+				       const struct i2c_device_id *id)
+{
+	struct wl1273_fm_platform_data *pdata = client->dev.platform_data;
+	struct wl1273_core *core;
+	struct mfd_cell *cell;
+	int children = 0;
+	int r = 0;
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	if (!pdata) {
+		dev_err(&client->dev, "No platform data.\n");
+		return -EINVAL;
+	}
+
+	if (!(pdata->children & WL1273_RADIO_CHILD)) {
+		dev_err(&client->dev, "Cannot function without radio child.\n");
+		return -EINVAL;
+	}
+
+	core = kzalloc(sizeof(*core), GFP_KERNEL);
+	if (!core)
+		return -ENOMEM;
+
+	core->pdata = pdata;
+	core->client = client;
+	mutex_init(&core->lock);
+
+	i2c_set_clientdata(client, core);
+
+	dev_dbg(&client->dev, "%s: Have V4L2.\n", __func__);
+
+	cell = &core->cells[children];
+	cell->name = "wl1273_fm_radio";
+	cell->platform_data = &core;
+	cell->data_size = sizeof(core);
+	children++;
+
+	if (pdata->children & WL1273_CODEC_CHILD) {
+		cell = &core->cells[children];
+
+		dev_dbg(&client->dev, "%s: Have codec.\n", __func__);
+		cell->name = "wl1273-codec";
+		cell->platform_data = &core;
+		cell->data_size = sizeof(core);
+		children++;
+	}
+
+	dev_dbg(&client->dev, "%s: number of children: %d.\n",
+		__func__, children);
+
+	r = mfd_add_devices(&client->dev, -1, core->cells,
+			    children, NULL, 0);
+	if (r)
+		goto err;
+
+	return 0;
+
+err:
+	i2c_set_clientdata(client, NULL);
+	pdata->free_resources();
+	kfree(core);
+
+	dev_dbg(&client->dev, "%s\n", __func__);
+
+	return r;
+}
+
+static struct i2c_driver wl1273_core_driver = {
+	.driver = {
+		.name = WL1273_FM_DRIVER_NAME,
+	},
+	.probe = wl1273_core_probe,
+	.id_table = wl1273_driver_id_table,
+	.remove = __devexit_p(wl1273_core_remove),
+};
+
+static int __init wl1273_core_init(void)
+{
+	int r;
+
+	r = i2c_add_driver(&wl1273_core_driver);
+	if (r) {
+		pr_err(WL1273_FM_DRIVER_NAME
+		       ": driver registration failed\n");
+		return r;
+	}
+
+	return r;
+}
+
+static void __exit wl1273_core_exit(void)
+{
+	i2c_del_driver(&wl1273_core_driver);
+}
+late_initcall(wl1273_core_init);
+module_exit(wl1273_core_exit);
+
+MODULE_AUTHOR("Matti Aaltonen <matti.j.aaltonen@nokia.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 7d2563fc15c..76cadcf3b1f 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -1455,7 +1455,11 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 		dev_err(wm831x->dev, "Failed to read parent ID: %d\n", ret);
 		goto err;
 	}
-	if (ret != 0x6204) {
+	switch (ret) {
+	case 0x6204:
+	case 0x6246:
+		break;
+	default:
 		dev_err(wm831x->dev, "Device is not a WM831x: ID %x\n", ret);
 		ret = -EINVAL;
 		goto err;
@@ -1620,7 +1624,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
 	case WM8325:
 		ret = mfd_add_devices(wm831x->dev, -1,
 				      wm8320_devs, ARRAY_SIZE(wm8320_devs),
-				      NULL, 0);
+				      NULL, wm831x->irq_base);
 		break;
 
 	default:
diff --git a/drivers/misc/apds9802als.c b/drivers/misc/apds9802als.c
index f9b91ba8900..644d4cd071c 100644
--- a/drivers/misc/apds9802als.c
+++ b/drivers/misc/apds9802als.c
@@ -123,7 +123,7 @@ static ssize_t als_sensing_range_store(struct device *dev,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct als_data *data = i2c_get_clientdata(client);
-	unsigned int ret_val;
+	int ret_val;
 	unsigned long val;
 
 	if (strict_strtoul(buf, 10, &val))
@@ -251,7 +251,6 @@ static int apds9802als_probe(struct i2c_client *client,
 
 	return res;
 als_error1:
-	i2c_set_clientdata(client, NULL);
 	kfree(data);
 	return res;
 }
diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c
index cee632e645e..d79a972f2c7 100644
--- a/drivers/misc/bh1770glc.c
+++ b/drivers/misc/bh1770glc.c
@@ -649,7 +649,7 @@ static ssize_t bh1770_power_state_store(struct device *dev,
 {
 	struct bh1770_chip *chip =  dev_get_drvdata(dev);
 	unsigned long value;
-	size_t ret;
+	ssize_t ret;
 
 	if (strict_strtoul(buf, 0, &value))
 		return -EINVAL;
@@ -659,8 +659,12 @@ static ssize_t bh1770_power_state_store(struct device *dev,
 		pm_runtime_get_sync(dev);
 
 		ret = bh1770_lux_rate(chip, chip->lux_rate_index);
-		ret |= bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
+		if (ret < 0) {
+			pm_runtime_put(dev);
+			goto leave;
+		}
 
+		ret = bh1770_lux_interrupt_control(chip, BH1770_ENABLE);
 		if (ret < 0) {
 			pm_runtime_put(dev);
 			goto leave;
diff --git a/drivers/misc/ioc4.c b/drivers/misc/ioc4.c
index 193206602d8..668d41e594a 100644
--- a/drivers/misc/ioc4.c
+++ b/drivers/misc/ioc4.c
@@ -273,13 +273,11 @@ ioc4_variant(struct ioc4_driver_data *idd)
 static void __devinit
 ioc4_load_modules(struct work_struct *work)
 {
-	/* arg just has to be freed */
-
 	request_module("sgiioc4");
-
-	kfree(work);
 }
 
+static DECLARE_WORK(ioc4_load_modules_work, ioc4_load_modules);
+
 /* Adds a new instance of an IOC4 card */
 static int __devinit
 ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
@@ -396,21 +394,12 @@ ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
 	 * PCI device.
 	 */
 	if (idd->idd_variant != IOC4_VARIANT_PCI_RT) {
-		struct work_struct *work;
-		work = kzalloc(sizeof(struct work_struct), GFP_KERNEL);
-		if (!work) {
-			printk(KERN_WARNING
-			       "%s: IOC4 unable to allocate memory for "
-			       "load of sub-modules.\n", __func__);
-		} else {
-			/* Request the module from a work procedure as the
-			 * modprobe goes out to a userland helper and that
-			 * will hang if done directly from ioc4_probe().
-			 */
-			printk(KERN_INFO "IOC4 loading sgiioc4 submodule\n");
-			INIT_WORK(work, ioc4_load_modules);
-			schedule_work(work);
-		}
+		/* Request the module from a work procedure as the modprobe
+		 * goes out to a userland helper and that will hang if done
+		 * directly from ioc4_probe().
+		 */
+		printk(KERN_INFO "IOC4 loading sgiioc4 submodule\n");
+		schedule_work(&ioc4_load_modules_work);
 	}
 
 	return 0;
@@ -498,7 +487,7 @@ static void __exit
 ioc4_exit(void)
 {
 	/* Ensure ioc4_load_modules() has completed before exiting */
-	flush_scheduled_work();
+	flush_work_sync(&ioc4_load_modules_work);
 	pci_unregister_driver(&ioc4_driver);
 }
 
diff --git a/drivers/misc/isl29020.c b/drivers/misc/isl29020.c
index 34fe835921c..307aada5fff 100644
--- a/drivers/misc/isl29020.c
+++ b/drivers/misc/isl29020.c
@@ -87,7 +87,7 @@ static ssize_t als_sensing_range_store(struct device *dev,
 		struct device_attribute *attr, const  char *buf, size_t count)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	unsigned int ret_val;
+	int ret_val;
 	unsigned long val;
 
 	if (strict_strtoul(buf, 10, &val))
@@ -106,6 +106,8 @@ static ssize_t als_sensing_range_store(struct device *dev,
 		val = 4;
 
 	ret_val = i2c_smbus_read_byte_data(client, 0x00);
+	if (ret_val < 0)
+		return ret_val;
 
 	ret_val &= 0xFC; /*reset the bit before setting them */
 	ret_val |= val - 1;
@@ -181,9 +183,7 @@ static int  isl29020_probe(struct i2c_client *client,
 
 static int isl29020_remove(struct i2c_client *client)
 {
-	struct als_data *data = i2c_get_clientdata(client);
 	sysfs_remove_group(&client->dev.kobj, &m_als_gr);
-	kfree(data);
 	return 0;
 }
 
@@ -243,6 +243,6 @@ static void  __exit sensor_isl29020_exit(void)
 module_init(sensor_isl29020_init);
 module_exit(sensor_isl29020_exit);
 
-MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com");
+MODULE_AUTHOR("Kalhan Trisal <kalhan.trisal@intel.com>");
 MODULE_DESCRIPTION("Intersil isl29020 ALS Driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index d551f09ccb7..6956f7e7d43 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -439,18 +439,23 @@ xpc_discovery(void)
 	 * nodes that can comprise an access protection grouping. The access
 	 * protection is in regards to memory, IOI and IPI.
 	 */
-	max_regions = 64;
 	region_size = xp_region_size;
 
-	switch (region_size) {
-	case 128:
-		max_regions *= 2;
-	case 64:
-		max_regions *= 2;
-	case 32:
-		max_regions *= 2;
-		region_size = 16;
-		DBUG_ON(!is_shub2());
+	if (is_uv())
+		max_regions = 256;
+	else {
+		max_regions = 64;
+
+		switch (region_size) {
+		case 128:
+			max_regions *= 2;
+		case 64:
+			max_regions *= 2;
+		case 32:
+			max_regions *= 2;
+			region_size = 16;
+			DBUG_ON(!is_shub2());
+		}
 	}
 
 	for (region = 0; region < max_regions; region++) {
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 8f86d702e46..a3a780faf85 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1559,7 +1559,7 @@ void mmc_stop_host(struct mmc_host *host)
 
 	if (host->caps & MMC_CAP_DISABLE)
 		cancel_delayed_work(&host->disable);
-	cancel_delayed_work(&host->detect);
+	cancel_delayed_work_sync(&host->detect);
 	mmc_flush_scheduled_work();
 
 	/* clear pm flags now and let card drivers set them as needed */
@@ -1773,6 +1773,7 @@ int mmc_pm_notify(struct notifier_block *notify_block,
 
 	case PM_POST_SUSPEND:
 	case PM_POST_HIBERNATION:
+	case PM_POST_RESTORE:
 
 		spin_lock_irqsave(&host->lock, flags);
 		host->rescan_disable = 0;
@@ -1789,7 +1790,7 @@ static int __init mmc_init(void)
 {
 	int ret;
 
-	workqueue = create_singlethread_workqueue("kmmcd");
+	workqueue = alloc_ordered_workqueue("kmmcd", 0);
 	if (!workqueue)
 		return -ENOMEM;
 
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 995261f7fd7..77f93c3b880 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -375,7 +375,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	struct mmc_card *oldcard)
 {
 	struct mmc_card *card;
-	int err, ddr = MMC_SDR_MODE;
+	int err, ddr = 0;
 	u32 cid[4];
 	unsigned int max_dtr;
 
@@ -562,7 +562,11 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 			       1 << bus_width, ddr);
 			err = 0;
 		} else {
-			mmc_card_set_ddr_mode(card);
+			if (ddr)
+				mmc_card_set_ddr_mode(card);
+			else
+				ddr = MMC_SDR_MODE;
+
 			mmc_set_bus_width_ddr(card->host, bus_width, ddr);
 		}
 	}
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index c3ad1058cd3..efef5f94ac4 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -547,9 +547,11 @@ static void mmc_sdio_detect(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	/* Make sure card is powered before detecting it */
-	err = pm_runtime_get_sync(&host->card->dev);
-	if (err < 0)
-		goto out;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		err = pm_runtime_get_sync(&host->card->dev);
+		if (err < 0)
+			goto out;
+	}
 
 	mmc_claim_host(host);
 
@@ -560,6 +562,20 @@ static void mmc_sdio_detect(struct mmc_host *host)
 
 	mmc_release_host(host);
 
+	/*
+	 * Tell PM core it's OK to power off the card now.
+	 *
+	 * The _sync variant is used in order to ensure that the card
+	 * is left powered off in case an error occurred, and the card
+	 * is going to be removed.
+	 *
+	 * Since there is no specific reason to believe a new user
+	 * is about to show up at this point, the _sync variant is
+	 * desirable anyway.
+	 */
+	if (host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_sync(&host->card->dev);
+
 out:
 	if (err) {
 		mmc_sdio_remove(host);
@@ -568,9 +584,6 @@ out:
 		mmc_detach_bus(host);
 		mmc_release_host(host);
 	}
-
-	/* Tell PM core that we're done */
-	pm_runtime_put(&host->card->dev);
 }
 
 /*
@@ -718,16 +731,21 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 	card = host->card;
 
 	/*
-	 * Let runtime PM core know our card is active
+	 * Enable runtime PM only if supported by host+card+board
 	 */
-	err = pm_runtime_set_active(&card->dev);
-	if (err)
-		goto remove;
+	if (host->caps & MMC_CAP_POWER_OFF_CARD) {
+		/*
+		 * Let runtime PM core know our card is active
+		 */
+		err = pm_runtime_set_active(&card->dev);
+		if (err)
+			goto remove;
 
-	/*
-	 * Enable runtime PM for this card
-	 */
-	pm_runtime_enable(&card->dev);
+		/*
+		 * Enable runtime PM for this card
+		 */
+		pm_runtime_enable(&card->dev);
+	}
 
 	/*
 	 * The number of functions on the card is encoded inside
@@ -745,9 +763,10 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 			goto remove;
 
 		/*
-		 * Enable Runtime PM for this func
+		 * Enable Runtime PM for this func (if supported)
 		 */
-		pm_runtime_enable(&card->sdio_func[i]->dev);
+		if (host->caps & MMC_CAP_POWER_OFF_CARD)
+			pm_runtime_enable(&card->sdio_func[i]->dev);
 	}
 
 	mmc_release_host(host);
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 2716c7ab6bb..203da443e33 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -17,6 +17,7 @@
 #include <linux/pm_runtime.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/sdio_func.h>
 
 #include "sdio_cis.h"
@@ -132,9 +133,11 @@ static int sdio_bus_probe(struct device *dev)
 	 * it should call pm_runtime_put_noidle() in its probe routine and
 	 * pm_runtime_get_noresume() in its remove routine.
 	 */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	/* Set the default block size so the driver is sure it's something
 	 * sensible. */
@@ -151,7 +154,8 @@ static int sdio_bus_probe(struct device *dev)
 	return 0;
 
 disable_runtimepm:
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 out:
 	return ret;
 }
@@ -160,12 +164,14 @@ static int sdio_bus_remove(struct device *dev)
 {
 	struct sdio_driver *drv = to_sdio_driver(dev->driver);
 	struct sdio_func *func = dev_to_sdio_func(dev);
-	int ret;
+	int ret = 0;
 
 	/* Make sure card is powered before invoking ->remove() */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto out;
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD) {
+		ret = pm_runtime_get_sync(dev);
+		if (ret < 0)
+			goto out;
+	}
 
 	drv->remove(func);
 
@@ -178,10 +184,12 @@ static int sdio_bus_remove(struct device *dev)
 	}
 
 	/* First, undo the increment made directly above */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 	/* Then undo the runtime PM settings in sdio_bus_probe() */
-	pm_runtime_put_noidle(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_put_noidle(dev);
 
 out:
 	return ret;
@@ -191,6 +199,8 @@ out:
 
 static int sdio_bus_pm_prepare(struct device *dev)
 {
+	struct sdio_func *func = dev_to_sdio_func(dev);
+
 	/*
 	 * Resume an SDIO device which was suspended at run time at this
 	 * point, in order to allow standard SDIO suspend/resume paths
@@ -212,7 +222,8 @@ static int sdio_bus_pm_prepare(struct device *dev)
 	 * since there is little point in failing system suspend if a
 	 * device can't be resumed.
 	 */
-	pm_runtime_resume(dev);
+	if (func->card->host->caps & MMC_CAP_POWER_OFF_CARD)
+		pm_runtime_resume(dev);
 
 	return 0;
 }
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 591ab540b40..d3e6a962f42 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -69,6 +69,7 @@
 #include <linux/highmem.h>
 
 #include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -493,10 +494,14 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
 		else if (data->flags & MMC_DATA_WRITE)
 			cmdr |= AT91_MCI_TRCMD_START;
 
-		if (data->flags & MMC_DATA_STREAM)
-			cmdr |= AT91_MCI_TRTYP_STREAM;
-		if (data->blocks > 1)
-			cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+		if (cmd->opcode == SD_IO_RW_EXTENDED) {
+			cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK;
+		} else {
+			if (data->flags & MMC_DATA_STREAM)
+				cmdr |= AT91_MCI_TRTYP_STREAM;
+			if (data->blocks > 1)
+				cmdr |= AT91_MCI_TRTYP_MULTIPLE;
+		}
 	}
 	else {
 		block_length = 0;
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 301351a5d83..ad2a7a032cd 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -26,6 +26,7 @@
 #include <linux/stat.h>
 
 #include <linux/mmc/host.h>
+#include <linux/mmc/sdio.h>
 
 #include <mach/atmel-mci.h>
 #include <linux/atmel-mci.h>
@@ -532,12 +533,17 @@ static u32 atmci_prepare_command(struct mmc_host *mmc,
 	data = cmd->data;
 	if (data) {
 		cmdr |= MCI_CMDR_START_XFER;
-		if (data->flags & MMC_DATA_STREAM)
-			cmdr |= MCI_CMDR_STREAM;
-		else if (data->blocks > 1)
-			cmdr |= MCI_CMDR_MULTI_BLOCK;
-		else
-			cmdr |= MCI_CMDR_BLOCK;
+
+		if (cmd->opcode == SD_IO_RW_EXTENDED) {
+			cmdr |= MCI_CMDR_SDIO_BLOCK;
+		} else {
+			if (data->flags & MMC_DATA_STREAM)
+				cmdr |= MCI_CMDR_STREAM;
+			else if (data->blocks > 1)
+				cmdr |= MCI_CMDR_MULTI_BLOCK;
+			else
+				cmdr |= MCI_CMDR_BLOCK;
+		}
 
 		if (data->flags & MMC_DATA_READ)
 			cmdr |= MCI_CMDR_TRDIR_READ;
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 87b4fc6c98c..56302282566 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -19,6 +19,7 @@
 #include <linux/highmem.h>
 #include <linux/log2.h>
 #include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
 #include <linux/amba/bus.h>
 #include <linux/clk.h>
 #include <linux/scatterlist.h>
@@ -45,6 +46,12 @@ static unsigned int fmax = 515633;
  *	      is asserted (likewise for RX)
  * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY
  *		  is asserted (likewise for RX)
+ * @broken_blockend: the MCI_DATABLOCKEND is broken on the hardware
+ *		and will not work at all.
+ * @broken_blockend_dma: the MCI_DATABLOCKEND is broken on the hardware when
+ *		using DMA.
+ * @sdio: variant supports SDIO
+ * @st_clkdiv: true if using a ST-specific clock divider algorithm
  */
 struct variant_data {
 	unsigned int		clkreg;
@@ -52,6 +59,10 @@ struct variant_data {
 	unsigned int		datalength_bits;
 	unsigned int		fifosize;
 	unsigned int		fifohalfsize;
+	bool			broken_blockend;
+	bool			broken_blockend_dma;
+	bool			sdio;
+	bool			st_clkdiv;
 };
 
 static struct variant_data variant_arm = {
@@ -65,6 +76,8 @@ static struct variant_data variant_u300 = {
 	.fifohalfsize		= 8 * 4,
 	.clkreg_enable		= 1 << 13, /* HWFCEN */
 	.datalength_bits	= 16,
+	.broken_blockend_dma	= true,
+	.sdio			= true,
 };
 
 static struct variant_data variant_ux500 = {
@@ -73,7 +86,11 @@ static struct variant_data variant_ux500 = {
 	.clkreg			= MCI_CLK_ENABLE,
 	.clkreg_enable		= 1 << 14, /* HWFCEN */
 	.datalength_bits	= 24,
+	.broken_blockend	= true,
+	.sdio			= true,
+	.st_clkdiv		= true,
 };
+
 /*
  * This must be called with host->lock held
  */
@@ -86,7 +103,22 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
 		if (desired >= host->mclk) {
 			clk = MCI_CLK_BYPASS;
 			host->cclk = host->mclk;
+		} else if (variant->st_clkdiv) {
+			/*
+			 * DB8500 TRM says f = mclk / (clkdiv + 2)
+			 * => clkdiv = (mclk / f) - 2
+			 * Round the divider up so we don't exceed the max
+			 * frequency
+			 */
+			clk = DIV_ROUND_UP(host->mclk, desired) - 2;
+			if (clk >= 256)
+				clk = 255;
+			host->cclk = host->mclk / (clk + 2);
 		} else {
+			/*
+			 * PL180 TRM says f = mclk / (2 * (clkdiv + 1))
+			 * => clkdiv = mclk / (2 * f) - 1
+			 */
 			clk = host->mclk / (2 * desired) - 1;
 			if (clk >= 256)
 				clk = 255;
@@ -129,10 +161,26 @@ mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
 	spin_lock(&host->lock);
 }
 
+static void mmci_set_mask1(struct mmci_host *host, unsigned int mask)
+{
+	void __iomem *base = host->base;
+
+	if (host->singleirq) {
+		unsigned int mask0 = readl(base + MMCIMASK0);
+
+		mask0 &= ~MCI_IRQ1MASK;
+		mask0 |= mask;
+
+		writel(mask0, base + MMCIMASK0);
+	}
+
+	writel(mask, base + MMCIMASK1);
+}
+
 static void mmci_stop_data(struct mmci_host *host)
 {
 	writel(0, host->base + MMCIDATACTRL);
-	writel(0, host->base + MMCIMASK1);
+	mmci_set_mask1(host, 0);
 	host->data = NULL;
 }
 
@@ -162,6 +210,8 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 	host->data = data;
 	host->size = data->blksz * data->blocks;
 	host->data_xfered = 0;
+	host->blockend = false;
+	host->dataend = false;
 
 	mmci_init_sg(host, data);
 
@@ -196,9 +246,14 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
 		irqmask = MCI_TXFIFOHALFEMPTYMASK;
 	}
 
+	/* The ST Micro variants has a special bit to enable SDIO */
+	if (variant->sdio && host->mmc->card)
+		if (mmc_card_sdio(host->mmc->card))
+			datactrl |= MCI_ST_DPSM_SDIOEN;
+
 	writel(datactrl, base + MMCIDATACTRL);
 	writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0);
-	writel(irqmask, base + MMCIMASK1);
+	mmci_set_mask1(host, irqmask);
 }
 
 static void
@@ -233,20 +288,9 @@ static void
 mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 	      unsigned int status)
 {
-	if (status & MCI_DATABLOCKEND) {
-		host->data_xfered += data->blksz;
-#ifdef CONFIG_ARCH_U300
-		/*
-		 * On the U300 some signal or other is
-		 * badly routed so that a data write does
-		 * not properly terminate with a MCI_DATAEND
-		 * status flag. This quirk will make writes
-		 * work again.
-		 */
-		if (data->flags & MMC_DATA_WRITE)
-			status |= MCI_DATAEND;
-#endif
-	}
+	struct variant_data *variant = host->variant;
+
+	/* First check for errors */
 	if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
 		dev_dbg(mmc_dev(host->mmc), "MCI ERROR IRQ (status %08x)\n", status);
 		if (status & MCI_DATACRCFAIL)
@@ -255,7 +299,10 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 			data->error = -ETIMEDOUT;
 		else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN))
 			data->error = -EIO;
-		status |= MCI_DATAEND;
+
+		/* Force-complete the transaction */
+		host->blockend = true;
+		host->dataend = true;
 
 		/*
 		 * We hit an error condition.  Ensure that any data
@@ -273,9 +320,64 @@ mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
 			local_irq_restore(flags);
 		}
 	}
-	if (status & MCI_DATAEND) {
+
+	/*
+	 * On ARM variants in PIO mode, MCI_DATABLOCKEND
+	 * is always sent first, and we increase the
+	 * transfered number of bytes for that IRQ. Then
+	 * MCI_DATAEND follows and we conclude the transaction.
+	 *
+	 * On the Ux500 single-IRQ variant MCI_DATABLOCKEND
+	 * doesn't seem to immediately clear from the status,
+	 * so we can't use it keep count when only one irq is
+	 * used because the irq will hit for other reasons, and
+	 * then the flag is still up. So we use the MCI_DATAEND
+	 * IRQ at the end of the entire transfer because
+	 * MCI_DATABLOCKEND is broken.
+	 *
+	 * In the U300, the IRQs can arrive out-of-order,
+	 * e.g. MCI_DATABLOCKEND sometimes arrives after MCI_DATAEND,
+	 * so for this case we use the flags "blockend" and
+	 * "dataend" to make sure both IRQs have arrived before
+	 * concluding the transaction. (This does not apply
+	 * to the Ux500 which doesn't fire MCI_DATABLOCKEND
+	 * at all.) In DMA mode it suffers from the same problem
+	 * as the Ux500.
+	 */
+	if (status & MCI_DATABLOCKEND) {
+		/*
+		 * Just being a little over-cautious, we do not
+		 * use this progressive update if the hardware blockend
+		 * flag is unreliable: since it can stay high between
+		 * IRQs it will corrupt the transfer counter.
+		 */
+		if (!variant->broken_blockend)
+			host->data_xfered += data->blksz;
+		host->blockend = true;
+	}
+
+	if (status & MCI_DATAEND)
+		host->dataend = true;
+
+	/*
+	 * On variants with broken blockend we shall only wait for dataend,
+	 * on others we must sync with the blockend signal since they can
+	 * appear out-of-order.
+	 */
+	if (host->dataend && (host->blockend || variant->broken_blockend)) {
 		mmci_stop_data(host);
 
+		/* Reset these flags */
+		host->blockend = false;
+		host->dataend = false;
+
+		/*
+		 * Variants with broken blockend flags need to handle the
+		 * end of the entire transfer here.
+		 */
+		if (variant->broken_blockend && !data->error)
+			host->data_xfered += data->blksz * data->blocks;
+
 		if (!data->stop) {
 			mmci_request_end(host, data->mrq);
 		} else {
@@ -356,7 +458,32 @@ static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int rem
 			 variant->fifosize : variant->fifohalfsize;
 		count = min(remain, maxcnt);
 
-		writesl(base + MMCIFIFO, ptr, count >> 2);
+		/*
+		 * The ST Micro variant for SDIO transfer sizes
+		 * less then 8 bytes should have clock H/W flow
+		 * control disabled.
+		 */
+		if (variant->sdio &&
+		    mmc_card_sdio(host->mmc->card)) {
+			if (count < 8)
+				writel(readl(host->base + MMCICLOCK) &
+					~variant->clkreg_enable,
+					host->base + MMCICLOCK);
+			else
+				writel(readl(host->base + MMCICLOCK) |
+					variant->clkreg_enable,
+					host->base + MMCICLOCK);
+		}
+
+		/*
+		 * SDIO especially may want to send something that is
+		 * not divisible by 4 (as opposed to card sectors
+		 * etc), and the FIFO only accept full 32-bit writes.
+		 * So compensate by adding +3 on the count, a single
+		 * byte become a 32bit write, 7 bytes will be two
+		 * 32bit writes etc.
+		 */
+		writesl(base + MMCIFIFO, ptr, (count + 3) >> 2);
 
 		ptr += count;
 		remain -= count;
@@ -437,7 +564,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 	 * "any data available" mode.
 	 */
 	if (status & MCI_RXACTIVE && host->size < variant->fifosize)
-		writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1);
+		mmci_set_mask1(host, MCI_RXDATAAVLBLMASK);
 
 	/*
 	 * If we run out of data, disable the data IRQs; this
@@ -446,7 +573,7 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
 	 * stops us racing with our data end IRQ.
 	 */
 	if (host->size == 0) {
-		writel(0, base + MMCIMASK1);
+		mmci_set_mask1(host, 0);
 		writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0);
 	}
 
@@ -469,6 +596,14 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
 		struct mmc_data *data;
 
 		status = readl(host->base + MMCISTATUS);
+
+		if (host->singleirq) {
+			if (status & readl(host->base + MMCIMASK1))
+				mmci_pio_irq(irq, dev_id);
+
+			status &= ~MCI_IRQ1MASK;
+		}
+
 		status &= readl(host->base + MMCIMASK0);
 		writel(status, host->base + MMCICLEAR);
 
@@ -635,6 +770,7 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	struct variant_data *variant = id->data;
 	struct mmci_host *host;
 	struct mmc_host *mmc;
+	unsigned int mask;
 	int ret;
 
 	/* must have platform data */
@@ -806,20 +942,30 @@ static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 	if (ret)
 		goto unmap;
 
-	ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host);
-	if (ret)
-		goto irq0_free;
+	if (dev->irq[1] == NO_IRQ)
+		host->singleirq = true;
+	else {
+		ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED,
+				  DRIVER_NAME " (pio)", host);
+		if (ret)
+			goto irq0_free;
+	}
 
-	writel(MCI_IRQENABLE, host->base + MMCIMASK0);
+	mask = MCI_IRQENABLE;
+	/* Don't use the datablockend flag if it's broken */
+	if (variant->broken_blockend)
+		mask &= ~MCI_DATABLOCKEND;
 
-	amba_set_drvdata(dev, mmc);
+	writel(mask, host->base + MMCIMASK0);
 
-	mmc_add_host(mmc);
+	amba_set_drvdata(dev, mmc);
 
-	dev_info(&dev->dev, "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
-		mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
+	dev_info(&dev->dev, "%s: PL%03x rev%u at 0x%08llx irq %d,%d\n",
+		mmc_hostname(mmc), amba_part(dev), amba_rev(dev),
 		(unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);
 
+	mmc_add_host(mmc);
+
 	return 0;
 
  irq0_free:
@@ -864,7 +1010,8 @@ static int __devexit mmci_remove(struct amba_device *dev)
 		writel(0, host->base + MMCIDATACTRL);
 
 		free_irq(dev->irq[0], host);
-		free_irq(dev->irq[1], host);
+		if (!host->singleirq)
+			free_irq(dev->irq[1], host);
 
 		if (host->gpio_wp != -ENOSYS)
 			gpio_free(host->gpio_wp);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 4ae887fc018..df06f01aac8 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -139,6 +139,11 @@
 	MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|	\
 	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATABLOCKENDMASK)
 
+/* These interrupts are directed to IRQ1 when two IRQ lines are available */
+#define MCI_IRQ1MASK \
+	(MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
+	 MCI_TXFIFOHALFEMPTYMASK)
+
 #define NR_SG		16
 
 struct clk;
@@ -154,6 +159,7 @@ struct mmci_host {
 	int			gpio_cd;
 	int			gpio_wp;
 	int			gpio_cd_irq;
+	bool			singleirq;
 
 	unsigned int		data_xfered;
 
@@ -171,6 +177,9 @@ struct mmci_host {
 	struct timer_list	timer;
 	unsigned int		oldstat;
 
+	bool			blockend;
+	bool			dataend;
+
 	/* pio stuff */
 	struct sg_mapping_iter	sg_miter;
 	unsigned int		size;
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index 1290d14c583..5decfd0bd61 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -44,6 +44,7 @@
 #include <mach/mmc.h>
 #include <mach/msm_iomap.h>
 #include <mach/dma.h>
+#include <mach/clk.h>
 
 #include "msm_sdcc.h"
 
@@ -126,6 +127,40 @@ static void
 msmsdcc_start_command(struct msmsdcc_host *host, struct mmc_command *cmd,
 		      u32 c);
 
+static void msmsdcc_reset_and_restore(struct msmsdcc_host *host)
+{
+	u32	mci_clk = 0;
+	u32	mci_mask0 = 0;
+	int	ret = 0;
+
+	/* Save the controller state */
+	mci_clk = readl(host->base + MMCICLOCK);
+	mci_mask0 = readl(host->base + MMCIMASK0);
+
+	/* Reset the controller */
+	ret = clk_reset(host->clk, CLK_RESET_ASSERT);
+	if (ret)
+		pr_err("%s: Clock assert failed at %u Hz with err %d\n",
+				mmc_hostname(host->mmc), host->clk_rate, ret);
+
+	ret = clk_reset(host->clk, CLK_RESET_DEASSERT);
+	if (ret)
+		pr_err("%s: Clock deassert failed at %u Hz with err %d\n",
+				mmc_hostname(host->mmc), host->clk_rate, ret);
+
+	pr_info("%s: Controller has been re-initialiazed\n",
+			mmc_hostname(host->mmc));
+
+	/* Restore the contoller state */
+	writel(host->pwr, host->base + MMCIPOWER);
+	writel(mci_clk, host->base + MMCICLOCK);
+	writel(mci_mask0, host->base + MMCIMASK0);
+	ret = clk_set_rate(host->clk, host->clk_rate);
+	if (ret)
+		pr_err("%s: Failed to set clk rate %u Hz (%d)\n",
+				mmc_hostname(host->mmc), host->clk_rate, ret);
+}
+
 static void
 msmsdcc_request_end(struct msmsdcc_host *host, struct mmc_request *mrq)
 {
@@ -155,7 +190,7 @@ static void
 msmsdcc_stop_data(struct msmsdcc_host *host)
 {
 	host->curr.data = NULL;
-	host->curr.got_dataend = host->curr.got_datablkend = 0;
+	host->curr.got_dataend = 0;
 }
 
 uint32_t msmsdcc_fifo_addr(struct msmsdcc_host *host)
@@ -189,42 +224,42 @@ msmsdcc_dma_exec_func(struct msm_dmov_cmd *cmd)
 }
 
 static void
-msmsdcc_dma_complete_func(struct msm_dmov_cmd *cmd,
-			  unsigned int result,
-			  struct msm_dmov_errdata *err)
+msmsdcc_dma_complete_tlet(unsigned long data)
 {
-	struct msmsdcc_dma_data	*dma_data =
-		container_of(cmd, struct msmsdcc_dma_data, hdr);
-	struct msmsdcc_host	*host = dma_data->host;
+	struct msmsdcc_host *host = (struct msmsdcc_host *)data;
 	unsigned long		flags;
 	struct mmc_request	*mrq;
+	struct msm_dmov_errdata err;
 
 	spin_lock_irqsave(&host->lock, flags);
 	host->dma.active = 0;
 
+	err = host->dma.err;
 	mrq = host->curr.mrq;
 	BUG_ON(!mrq);
 	WARN_ON(!mrq->data);
 
-	if (!(result & DMOV_RSLT_VALID)) {
+	if (!(host->dma.result & DMOV_RSLT_VALID)) {
 		pr_err("msmsdcc: Invalid DataMover result\n");
 		goto out;
 	}
 
-	if (result & DMOV_RSLT_DONE) {
+	if (host->dma.result & DMOV_RSLT_DONE) {
 		host->curr.data_xfered = host->curr.xfer_size;
 	} else {
 		/* Error or flush  */
-		if (result & DMOV_RSLT_ERROR)
+		if (host->dma.result & DMOV_RSLT_ERROR)
 			pr_err("%s: DMA error (0x%.8x)\n",
-			       mmc_hostname(host->mmc), result);
-		if (result & DMOV_RSLT_FLUSH)
+			       mmc_hostname(host->mmc), host->dma.result);
+		if (host->dma.result & DMOV_RSLT_FLUSH)
 			pr_err("%s: DMA channel flushed (0x%.8x)\n",
-			       mmc_hostname(host->mmc), result);
-		if (err)
-			pr_err("Flush data: %.8x %.8x %.8x %.8x %.8x %.8x\n",
-			       err->flush[0], err->flush[1], err->flush[2],
-			       err->flush[3], err->flush[4], err->flush[5]);
+			       mmc_hostname(host->mmc), host->dma.result);
+
+		pr_err("Flush data: %.8x %.8x %.8x %.8x %.8x %.8x\n",
+		       err.flush[0], err.flush[1], err.flush[2],
+		       err.flush[3], err.flush[4], err.flush[5]);
+
+		msmsdcc_reset_and_restore(host);
 		if (!mrq->data->error)
 			mrq->data->error = -EIO;
 	}
@@ -242,8 +277,7 @@ msmsdcc_dma_complete_func(struct msm_dmov_cmd *cmd,
 	host->dma.sg = NULL;
 	host->dma.busy = 0;
 
-	if ((host->curr.got_dataend && host->curr.got_datablkend)
-	     || mrq->data->error) {
+	if (host->curr.got_dataend || mrq->data->error) {
 
 		/*
 		 * If we've already gotten our DATAEND / DATABLKEND
@@ -273,6 +307,22 @@ out:
 	return;
 }
 
+static void
+msmsdcc_dma_complete_func(struct msm_dmov_cmd *cmd,
+			  unsigned int result,
+			  struct msm_dmov_errdata *err)
+{
+	struct msmsdcc_dma_data	*dma_data =
+		container_of(cmd, struct msmsdcc_dma_data, hdr);
+	struct msmsdcc_host *host = dma_data->host;
+
+	dma_data->result = result;
+	if (err)
+		memcpy(&dma_data->err, err, sizeof(struct msm_dmov_errdata));
+
+	tasklet_schedule(&host->dma_tlet);
+}
+
 static int validate_dma(struct msmsdcc_host *host, struct mmc_data *data)
 {
 	if (host->dma.channel == -1)
@@ -424,6 +474,11 @@ msmsdcc_start_command_deferred(struct msmsdcc_host *host,
 	      (cmd->opcode == 53))
 		*c |= MCI_CSPM_DATCMD;
 
+	if (host->prog_scan && (cmd->opcode == 12)) {
+		*c |= MCI_CPSM_PROGENA;
+		host->prog_enable = true;
+	}
+
 	if (cmd == cmd->mrq->stop)
 		*c |= MCI_CSPM_MCIABORT;
 
@@ -450,7 +505,6 @@ msmsdcc_start_data(struct msmsdcc_host *host, struct mmc_data *data,
 	host->curr.xfer_remain = host->curr.xfer_size;
 	host->curr.data_xfered = 0;
 	host->curr.got_dataend = 0;
-	host->curr.got_datablkend = 0;
 
 	memset(&host->pio, 0, sizeof(host->pio));
 
@@ -494,6 +548,8 @@ msmsdcc_start_data(struct msmsdcc_host *host, struct mmc_data *data,
 			host->cmd_c = c;
 		}
 		msm_dmov_enqueue_cmd(host->dma.channel, &host->dma.hdr);
+		if (data->flags & MMC_DATA_WRITE)
+			host->prog_scan = true;
 	} else {
 		msmsdcc_writel(host, timeout, MMCIDATATIMER);
 
@@ -555,6 +611,9 @@ msmsdcc_pio_read(struct msmsdcc_host *host, char *buffer, unsigned int remain)
 	uint32_t	*ptr = (uint32_t *) buffer;
 	int		count = 0;
 
+	if (remain % 4)
+		remain = ((remain >> 2) + 1) << 2;
+
 	while (msmsdcc_readl(host, MMCISTATUS) & MCI_RXDATAAVLBL) {
 		*ptr = msmsdcc_readl(host, MMCIFIFO + (count % MCI_FIFOSIZE));
 		ptr++;
@@ -575,13 +634,14 @@ msmsdcc_pio_write(struct msmsdcc_host *host, char *buffer,
 	char *ptr = buffer;
 
 	do {
-		unsigned int count, maxcnt;
+		unsigned int count, maxcnt, sz;
 
 		maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE :
 						    MCI_FIFOHALFSIZE;
 		count = min(remain, maxcnt);
 
-		writesl(base + MMCIFIFO, ptr, count >> 2);
+		sz = count % 4 ? (count >> 2) + 1 : (count >> 2);
+		writesl(base + MMCIFIFO, ptr, sz);
 		ptr += count;
 		remain -= count;
 
@@ -702,10 +762,26 @@ static void msmsdcc_do_cmdirq(struct msmsdcc_host *host, uint32_t status)
 			msm_dmov_stop_cmd(host->dma.channel,
 					  &host->dma.hdr, 0);
 		else if (host->curr.data) { /* Non DMA */
+			msmsdcc_reset_and_restore(host);
 			msmsdcc_stop_data(host);
 			msmsdcc_request_end(host, cmd->mrq);
-		} else /* host->data == NULL */
-			msmsdcc_request_end(host, cmd->mrq);
+		} else { /* host->data == NULL */
+			if (!cmd->error && host->prog_enable) {
+				if (status & MCI_PROGDONE) {
+					host->prog_scan = false;
+					host->prog_enable = false;
+					msmsdcc_request_end(host, cmd->mrq);
+				} else {
+					host->curr.cmd = cmd;
+				}
+			} else {
+				if (host->prog_enable) {
+					host->prog_scan = false;
+					host->prog_enable = false;
+				}
+				msmsdcc_request_end(host, cmd->mrq);
+			}
+		}
 	} else if (cmd->data)
 		if (!(cmd->data->flags & MMC_DATA_READ))
 			msmsdcc_start_data(host, cmd->data,
@@ -719,7 +795,7 @@ msmsdcc_handle_irq_data(struct msmsdcc_host *host, u32 status,
 	struct mmc_data *data = host->curr.data;
 
 	if (status & (MCI_CMDSENT | MCI_CMDRESPEND | MCI_CMDCRCFAIL |
-	              MCI_CMDTIMEOUT) && host->curr.cmd) {
+			MCI_CMDTIMEOUT | MCI_PROGDONE) && host->curr.cmd) {
 		msmsdcc_do_cmdirq(host, status);
 	}
 
@@ -735,6 +811,7 @@ msmsdcc_handle_irq_data(struct msmsdcc_host *host, u32 status,
 			msm_dmov_stop_cmd(host->dma.channel,
 					  &host->dma.hdr, 0);
 		else {
+			msmsdcc_reset_and_restore(host);
 			if (host->curr.data)
 				msmsdcc_stop_data(host);
 			if (!data->stop)
@@ -748,14 +825,10 @@ msmsdcc_handle_irq_data(struct msmsdcc_host *host, u32 status,
 	if (!host->curr.got_dataend && (status & MCI_DATAEND))
 		host->curr.got_dataend = 1;
 
-	if (!host->curr.got_datablkend && (status & MCI_DATABLOCKEND))
-		host->curr.got_datablkend = 1;
-
 	/*
 	 * If DMA is still in progress, we complete via the completion handler
 	 */
-	if (host->curr.got_dataend && host->curr.got_datablkend &&
-	    !host->dma.busy) {
+	if (host->curr.got_dataend && !host->dma.busy) {
 		/*
 		 * There appears to be an issue in the controller where
 		 * if you request a small block transfer (< fifo size),
@@ -792,8 +865,7 @@ msmsdcc_irq(int irq, void *dev_id)
 
 	do {
 		status = msmsdcc_readl(host, MMCISTATUS);
-		status &= (msmsdcc_readl(host, MMCIMASK0) |
-					      MCI_DATABLOCKENDMASK);
+		status &= msmsdcc_readl(host, MMCIMASK0);
 		msmsdcc_writel(host, status, MMCICLEAR);
 
 		if (status & MCI_SDIOINTR)
@@ -1118,6 +1190,9 @@ msmsdcc_probe(struct platform_device *pdev)
 	host->dmares = dmares;
 	spin_lock_init(&host->lock);
 
+	tasklet_init(&host->dma_tlet, msmsdcc_dma_complete_tlet,
+			(unsigned long)host);
+
 	/*
 	 * Setup DMA
 	 */
diff --git a/drivers/mmc/host/msm_sdcc.h b/drivers/mmc/host/msm_sdcc.h
index ff2b0f74f6f..939557af266 100644
--- a/drivers/mmc/host/msm_sdcc.h
+++ b/drivers/mmc/host/msm_sdcc.h
@@ -138,7 +138,7 @@
 #define MCI_IRQENABLE	\
 	(MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK|	\
 	MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK|	\
-	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATAENDMASK)
+	MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_DATAENDMASK|MCI_PROGDONEMASK)
 
 /*
  * The size of the FIFO in bytes.
@@ -172,6 +172,8 @@ struct msmsdcc_dma_data {
 	struct msmsdcc_host		*host;
 	int				busy; /* Set if DM is busy */
 	int				active;
+	unsigned int			result;
+	struct msm_dmov_errdata		err;
 };
 
 struct msmsdcc_pio_data {
@@ -188,7 +190,6 @@ struct msmsdcc_curr_req {
 	unsigned int		xfer_remain;	/* Bytes remaining to send */
 	unsigned int		data_xfered;	/* Bytes acked by BLKEND irq */
 	int			got_dataend;
-	int			got_datablkend;
 	int			user_pages;
 };
 
@@ -235,6 +236,7 @@ struct msmsdcc_host {
 	int			cmdpoll;
 	struct msmsdcc_stats	stats;
 
+	struct tasklet_struct	dma_tlet;
 	/* Command parameters */
 	unsigned int		cmd_timeout;
 	unsigned int		cmd_pio_irqmask;
@@ -242,6 +244,8 @@ struct msmsdcc_host {
 	struct mmc_command	*cmd_cmd;
 	u32			cmd_c;
 
+	bool prog_scan;
+	bool prog_enable;
 };
 
 #endif
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 0c7e37f496e..379d2ffe4c8 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -173,6 +173,8 @@ struct mmc_omap_host {
 	struct omap_mmc_platform_data *pdata;
 };
 
+static struct workqueue_struct *mmc_omap_wq;
+
 static void mmc_omap_fclk_offdelay(struct mmc_omap_slot *slot)
 {
 	unsigned long tick_ns;
@@ -289,7 +291,7 @@ static void mmc_omap_release_slot(struct mmc_omap_slot *slot, int clk_enabled)
 		host->next_slot = new_slot;
 		host->mmc = new_slot->mmc;
 		spin_unlock_irqrestore(&host->slot_lock, flags);
-		schedule_work(&host->slot_release_work);
+		queue_work(mmc_omap_wq, &host->slot_release_work);
 		return;
 	}
 
@@ -457,7 +459,7 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
 	}
 
 	host->stop_data = data;
-	schedule_work(&host->send_stop_work);
+	queue_work(mmc_omap_wq, &host->send_stop_work);
 }
 
 static void
@@ -637,7 +639,7 @@ mmc_omap_cmd_timer(unsigned long data)
 		OMAP_MMC_WRITE(host, IE, 0);
 		disable_irq(host->irq);
 		host->abort = 1;
-		schedule_work(&host->cmd_abort_work);
+		queue_work(mmc_omap_wq, &host->cmd_abort_work);
 	}
 	spin_unlock_irqrestore(&host->slot_lock, flags);
 }
@@ -826,7 +828,7 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
 		host->abort = 1;
 		OMAP_MMC_WRITE(host, IE, 0);
 		disable_irq_nosync(host->irq);
-		schedule_work(&host->cmd_abort_work);
+		queue_work(mmc_omap_wq, &host->cmd_abort_work);
 		return IRQ_HANDLED;
 	}
 
@@ -1387,7 +1389,7 @@ static void mmc_omap_remove_slot(struct mmc_omap_slot *slot)
 
 	tasklet_kill(&slot->cover_tasklet);
 	del_timer_sync(&slot->cover_timer);
-	flush_scheduled_work();
+	flush_workqueue(mmc_omap_wq);
 
 	mmc_remove_host(mmc);
 	mmc_free_host(mmc);
@@ -1608,12 +1610,22 @@ static struct platform_driver mmc_omap_driver = {
 
 static int __init mmc_omap_init(void)
 {
-	return platform_driver_probe(&mmc_omap_driver, mmc_omap_probe);
+	int ret;
+
+	mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
+	if (!mmc_omap_wq)
+		return -ENOMEM;
+
+	ret = platform_driver_probe(&mmc_omap_driver, mmc_omap_probe);
+	if (ret)
+		destroy_workqueue(mmc_omap_wq);
+	return ret;
 }
 
 static void __exit mmc_omap_exit(void)
 {
 	platform_driver_unregister(&mmc_omap_driver);
+	destroy_workqueue(mmc_omap_wq);
 }
 
 module_init(mmc_omap_init);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 82a1079bbdc..078fdf11af0 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1002,7 +1002,7 @@ static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host,
 	 * Monitor a 0->1 transition first
 	 */
 	if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
-		while ((!(OMAP_HSMMC_READ(host, SYSCTL) & bit))
+		while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
 					&& (i++ < limit))
 			cpu_relax();
 	}
@@ -2290,7 +2290,7 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
 		free_irq(host->irq, host);
 		if (mmc_slot(host).card_detect_irq)
 			free_irq(mmc_slot(host).card_detect_irq, host);
-		flush_scheduled_work();
+		flush_work_sync(&host->mmc_carddetect_work);
 
 		mmc_host_disable(host->mmc);
 		clk_disable(host->iclk);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 2e9cca19c90..9b82910b9db 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -17,6 +17,7 @@
 #include <linux/clk.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-pltfm.h>
+#include <mach/hardware.h>
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
 #include "sdhci-esdhc.h"
@@ -112,6 +113,13 @@ static int esdhc_pltfm_init(struct sdhci_host *host, struct sdhci_pltfm_data *pd
 	clk_enable(clk);
 	pltfm_host->clk = clk;
 
+	if (cpu_is_mx35() || cpu_is_mx51())
+		host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
+
+	/* Fix errata ENGcm07207 which is present on i.MX25 and i.MX35 */
+	if (cpu_is_mx25() || cpu_is_mx35())
+		host->quirks |= SDHCI_QUIRK_NO_MULTIBLOCK;
+
 	return 0;
 }
 
@@ -133,10 +141,8 @@ static struct sdhci_ops sdhci_esdhc_ops = {
 };
 
 struct sdhci_pltfm_data sdhci_esdhc_imx_pdata = {
-	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_NO_MULTIBLOCK
-			| SDHCI_QUIRK_BROKEN_ADMA,
+	.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_ADMA,
 	/* ADMA has issues. Might be fixable */
-	/* NO_MULTIBLOCK might be MX35 only (Errata: ENGcm07207) */
 	.ops = &sdhci_esdhc_ops,
 	.init = esdhc_pltfm_init,
 	.exit = esdhc_pltfm_exit,
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 55746bac2f4..3d9c2460d43 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -149,11 +149,11 @@ static const struct sdhci_pci_fixes sdhci_cafe = {
  * ADMA operation is disabled for Moorestown platform due to
  * hardware bugs.
  */
-static int mrst_hc1_probe(struct sdhci_pci_chip *chip)
+static int mrst_hc_probe(struct sdhci_pci_chip *chip)
 {
 	/*
-	 * slots number is fixed here for MRST as SDIO3 is never used and has
-	 * hardware bugs.
+	 * slots number is fixed here for MRST as SDIO3/5 are never used and
+	 * have hardware bugs.
 	 */
 	chip->num_slots = 1;
 	return 0;
@@ -163,9 +163,9 @@ static const struct sdhci_pci_fixes sdhci_intel_mrst_hc0 = {
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
 };
 
-static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1 = {
+static const struct sdhci_pci_fixes sdhci_intel_mrst_hc1_hc2 = {
 	.quirks		= SDHCI_QUIRK_BROKEN_ADMA | SDHCI_QUIRK_NO_HISPD_BIT,
-	.probe		= mrst_hc1_probe,
+	.probe		= mrst_hc_probe,
 };
 
 static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
@@ -538,7 +538,15 @@ static const struct pci_device_id pci_ids[] __devinitdata = {
 		.device		= PCI_DEVICE_ID_INTEL_MRST_SD1,
 		.subvendor	= PCI_ANY_ID,
 		.subdevice	= PCI_ANY_ID,
-		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_MRST_SD2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_intel_mrst_hc1_hc2,
 	},
 
 	{
@@ -637,6 +645,7 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 {
 	struct sdhci_pci_chip *chip;
 	struct sdhci_pci_slot *slot;
+	mmc_pm_flag_t slot_pm_flags;
 	mmc_pm_flag_t pm_flags = 0;
 	int i, ret;
 
@@ -657,7 +666,11 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 			return ret;
 		}
 
-		pm_flags |= slot->host->mmc->pm_flags;
+		slot_pm_flags = slot->host->mmc->pm_flags;
+		if (slot_pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+			sdhci_enable_irq_wakeups(slot->host);
+
+		pm_flags |= slot_pm_flags;
 	}
 
 	if (chip->fixes && chip->fixes->suspend) {
@@ -671,8 +684,10 @@ static int sdhci_pci_suspend (struct pci_dev *pdev, pm_message_t state)
 
 	pci_save_state(pdev);
 	if (pm_flags & MMC_PM_KEEP_POWER) {
-		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ)
+		if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) {
+			pci_pme_active(pdev, true);
 			pci_enable_wake(pdev, PCI_D3hot, 1);
+		}
 		pci_set_power_state(pdev, PCI_D3hot);
 	} else {
 		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c
index fc406ac5d19..5a61208cbc6 100644
--- a/drivers/mmc/host/sdhci-pxa.c
+++ b/drivers/mmc/host/sdhci-pxa.c
@@ -141,6 +141,10 @@ static int __devinit sdhci_pxa_probe(struct platform_device *pdev)
 	if (pdata->quirks)
 		host->quirks |= pdata->quirks;
 
+	/* If slot design supports 8 bit data, indicate this to MMC. */
+	if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT)
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add host\n");
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 782c0ee3c92..a25db426c91 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1185,17 +1185,31 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	if (host->ops->platform_send_init_74_clocks)
 		host->ops->platform_send_init_74_clocks(host, ios->power_mode);
 
-	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
-
-	if (ios->bus_width == MMC_BUS_WIDTH_8)
-		ctrl |= SDHCI_CTRL_8BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_8BITBUS;
+	/*
+	 * If your platform has 8-bit width support but is not a v3 controller,
+	 * or if it requires special setup code, you should implement that in
+	 * platform_8bit_width().
+	 */
+	if (host->ops->platform_8bit_width)
+		host->ops->platform_8bit_width(host, ios->bus_width);
+	else {
+		ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
+		if (ios->bus_width == MMC_BUS_WIDTH_8) {
+			ctrl &= ~SDHCI_CTRL_4BITBUS;
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl |= SDHCI_CTRL_8BITBUS;
+		} else {
+			if (host->version >= SDHCI_SPEC_300)
+				ctrl &= ~SDHCI_CTRL_8BITBUS;
+			if (ios->bus_width == MMC_BUS_WIDTH_4)
+				ctrl |= SDHCI_CTRL_4BITBUS;
+			else
+				ctrl &= ~SDHCI_CTRL_4BITBUS;
+		}
+		sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
+	}
 
-	if (ios->bus_width == MMC_BUS_WIDTH_4)
-		ctrl |= SDHCI_CTRL_4BITBUS;
-	else
-		ctrl &= ~SDHCI_CTRL_4BITBUS;
+	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
 
 	if ((ios->timing == MMC_TIMING_SD_HS ||
 	     ios->timing == MMC_TIMING_MMC_HS)
@@ -1681,6 +1695,16 @@ int sdhci_resume_host(struct sdhci_host *host)
 
 EXPORT_SYMBOL_GPL(sdhci_resume_host);
 
+void sdhci_enable_irq_wakeups(struct sdhci_host *host)
+{
+	u8 val;
+	val = sdhci_readb(host, SDHCI_WAKE_UP_CONTROL);
+	val |= SDHCI_WAKE_ON_INT;
+	sdhci_writeb(host, val, SDHCI_WAKE_UP_CONTROL);
+}
+
+EXPORT_SYMBOL_GPL(sdhci_enable_irq_wakeups);
+
 #endif /* CONFIG_PM */
 
 /*****************************************************************************\
@@ -1845,11 +1869,19 @@ int sdhci_add_host(struct sdhci_host *host)
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300;
 	else
 		mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200;
+
 	mmc->f_max = host->max_clk;
 	mmc->caps |= MMC_CAP_SDIO_IRQ;
 
+	/*
+	 * A controller may support 8-bit width, but the board itself
+	 * might not have the pins brought out.  Boards that support
+	 * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in
+	 * their platform code before calling sdhci_add_host(), and we
+	 * won't assume 8-bit width for hosts without that CAP.
+	 */
 	if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA))
-		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA;
+		mmc->caps |= MMC_CAP_4_BIT_DATA;
 
 	if (caps & SDHCI_CAN_DO_HISPD)
 		mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index b7b8a3b28b0..e42d7f00c06 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -76,7 +76,7 @@
 #define   SDHCI_CTRL_ADMA1	0x08
 #define   SDHCI_CTRL_ADMA32	0x10
 #define   SDHCI_CTRL_ADMA64	0x18
-#define  SDHCI_CTRL_8BITBUS	0x20
+#define   SDHCI_CTRL_8BITBUS	0x20
 
 #define SDHCI_POWER_CONTROL	0x29
 #define  SDHCI_POWER_ON		0x01
@@ -87,6 +87,9 @@
 #define SDHCI_BLOCK_GAP_CONTROL	0x2A
 
 #define SDHCI_WAKE_UP_CONTROL	0x2B
+#define  SDHCI_WAKE_ON_INT	0x01
+#define  SDHCI_WAKE_ON_INSERT	0x02
+#define  SDHCI_WAKE_ON_REMOVE	0x04
 
 #define SDHCI_CLOCK_CONTROL	0x2C
 #define  SDHCI_DIVIDER_SHIFT	8
@@ -152,6 +155,7 @@
 #define  SDHCI_CLOCK_BASE_SHIFT	8
 #define  SDHCI_MAX_BLOCK_MASK	0x00030000
 #define  SDHCI_MAX_BLOCK_SHIFT  16
+#define  SDHCI_CAN_DO_8BIT	0x00040000
 #define  SDHCI_CAN_DO_ADMA2	0x00080000
 #define  SDHCI_CAN_DO_ADMA1	0x00100000
 #define  SDHCI_CAN_DO_HISPD	0x00200000
@@ -212,6 +216,8 @@ struct sdhci_ops {
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
 	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
+	int		(*platform_8bit_width)(struct sdhci_host *host,
+					       int width);
 	void (*platform_send_init_74_clocks)(struct sdhci_host *host,
 					     u8 power_mode);
 	unsigned int    (*get_ro)(struct sdhci_host *host);
@@ -317,6 +323,7 @@ extern void sdhci_remove_host(struct sdhci_host *host, int dead);
 #ifdef CONFIG_PM
 extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state);
 extern int sdhci_resume_host(struct sdhci_host *host);
+extern void sdhci_enable_irq_wakeups(struct sdhci_host *host);
 #endif
 
 #endif /* __SDHCI_HW_H */
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index ddd09840520..12884c27017 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -16,16 +16,19 @@
  *
  */
 
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
 #include <linux/dma-mapping.h>
-#include <linux/mmc/host.h>
+#include <linux/dmaengine.h>
 #include <linux/mmc/card.h>
 #include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sdio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
 #include <linux/mmc/sh_mmcif.h>
+#include <linux/pagemap.h>
+#include <linux/platform_device.h>
 
 #define DRIVER_NAME	"sh_mmcif"
 #define DRIVER_VERSION	"2010-04-28"
@@ -62,25 +65,6 @@
 /* CE_BLOCK_SET */
 #define BLOCK_SIZE_MASK		0x0000ffff
 
-/* CE_CLK_CTRL */
-#define CLK_ENABLE		(1 << 24) /* 1: output mmc clock */
-#define CLK_CLEAR		((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
-#define CLK_SUP_PCLK		((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
-#define SRSPTO_256		((1 << 13) | (0 << 12)) /* resp timeout */
-#define SRBSYTO_29		((1 << 11) | (1 << 10) |	\
-				 (1 << 9) | (1 << 8)) /* resp busy timeout */
-#define SRWDTO_29		((1 << 7) | (1 << 6) |		\
-				 (1 << 5) | (1 << 4)) /* read/write timeout */
-#define SCCSTO_29		((1 << 3) | (1 << 2) |		\
-				 (1 << 1) | (1 << 0)) /* ccs timeout */
-
-/* CE_BUF_ACC */
-#define BUF_ACC_DMAWEN		(1 << 25)
-#define BUF_ACC_DMAREN		(1 << 24)
-#define BUF_ACC_BUSW_32		(0 << 17)
-#define BUF_ACC_BUSW_16		(1 << 17)
-#define BUF_ACC_ATYP		(1 << 16)
-
 /* CE_INT */
 #define INT_CCSDE		(1 << 29)
 #define INT_CMD12DRE		(1 << 26)
@@ -165,10 +149,6 @@
 				 STS2_AC12BSYTO | STS2_RSPBSYTO |	\
 				 STS2_AC12RSPTO | STS2_RSPTO)
 
-/* CE_VERSION */
-#define SOFT_RST_ON		(1 << 31)
-#define SOFT_RST_OFF		(0 << 31)
-
 #define CLKDEV_EMMC_DATA	52000000 /* 52MHz */
 #define CLKDEV_MMC_DATA		20000000 /* 20MHz */
 #define CLKDEV_INIT		400000   /* 400 KHz */
@@ -176,18 +156,21 @@
 struct sh_mmcif_host {
 	struct mmc_host *mmc;
 	struct mmc_data *data;
-	struct mmc_command *cmd;
 	struct platform_device *pd;
 	struct clk *hclk;
 	unsigned int clk;
 	int bus_width;
-	u16 wait_int;
-	u16 sd_error;
+	bool sd_error;
 	long timeout;
 	void __iomem *addr;
-	wait_queue_head_t intr_wait;
-};
+	struct completion intr_wait;
 
+	/* DMA support */
+	struct dma_chan		*chan_rx;
+	struct dma_chan		*chan_tx;
+	struct completion	dma_complete;
+	unsigned int            dma_sglen;
+};
 
 static inline void sh_mmcif_bitset(struct sh_mmcif_host *host,
 					unsigned int reg, u32 val)
@@ -201,6 +184,188 @@ static inline void sh_mmcif_bitclr(struct sh_mmcif_host *host,
 	writel(~val & readl(host->addr + reg), host->addr + reg);
 }
 
+static void mmcif_dma_complete(void *arg)
+{
+	struct sh_mmcif_host *host = arg;
+	dev_dbg(&host->pd->dev, "Command completed\n");
+
+	if (WARN(!host->data, "%s: NULL data in DMA completion!\n",
+		 dev_name(&host->pd->dev)))
+		return;
+
+	if (host->data->flags & MMC_DATA_READ)
+		dma_unmap_sg(&host->pd->dev, host->data->sg, host->dma_sglen,
+			     DMA_FROM_DEVICE);
+	else
+		dma_unmap_sg(&host->pd->dev, host->data->sg, host->dma_sglen,
+			     DMA_TO_DEVICE);
+
+	complete(&host->dma_complete);
+}
+
+static void sh_mmcif_start_dma_rx(struct sh_mmcif_host *host)
+{
+	struct scatterlist *sg = host->data->sg;
+	struct dma_async_tx_descriptor *desc = NULL;
+	struct dma_chan *chan = host->chan_rx;
+	dma_cookie_t cookie = -EINVAL;
+	int ret;
+
+	ret = dma_map_sg(&host->pd->dev, sg, host->data->sg_len, DMA_FROM_DEVICE);
+	if (ret > 0) {
+		host->dma_sglen = ret;
+		desc = chan->device->device_prep_slave_sg(chan, sg, ret,
+			DMA_FROM_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	}
+
+	if (desc) {
+		desc->callback = mmcif_dma_complete;
+		desc->callback_param = host;
+		cookie = desc->tx_submit(desc);
+		if (cookie < 0) {
+			desc = NULL;
+			ret = cookie;
+		} else {
+			sh_mmcif_bitset(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN);
+			chan->device->device_issue_pending(chan);
+		}
+	}
+	dev_dbg(&host->pd->dev, "%s(): mapped %d -> %d, cookie %d\n",
+		__func__, host->data->sg_len, ret, cookie);
+
+	if (!desc) {
+		/* DMA failed, fall back to PIO */
+		if (ret >= 0)
+			ret = -EIO;
+		host->chan_rx = NULL;
+		host->dma_sglen = 0;
+		dma_release_channel(chan);
+		/* Free the Tx channel too */
+		chan = host->chan_tx;
+		if (chan) {
+			host->chan_tx = NULL;
+			dma_release_channel(chan);
+		}
+		dev_warn(&host->pd->dev,
+			 "DMA failed: %d, falling back to PIO\n", ret);
+		sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN | BUF_ACC_DMAWEN);
+	}
+
+	dev_dbg(&host->pd->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__,
+		desc, cookie, host->data->sg_len);
+}
+
+static void sh_mmcif_start_dma_tx(struct sh_mmcif_host *host)
+{
+	struct scatterlist *sg = host->data->sg;
+	struct dma_async_tx_descriptor *desc = NULL;
+	struct dma_chan *chan = host->chan_tx;
+	dma_cookie_t cookie = -EINVAL;
+	int ret;
+
+	ret = dma_map_sg(&host->pd->dev, sg, host->data->sg_len, DMA_TO_DEVICE);
+	if (ret > 0) {
+		host->dma_sglen = ret;
+		desc = chan->device->device_prep_slave_sg(chan, sg, ret,
+			DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	}
+
+	if (desc) {
+		desc->callback = mmcif_dma_complete;
+		desc->callback_param = host;
+		cookie = desc->tx_submit(desc);
+		if (cookie < 0) {
+			desc = NULL;
+			ret = cookie;
+		} else {
+			sh_mmcif_bitset(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAWEN);
+			chan->device->device_issue_pending(chan);
+		}
+	}
+	dev_dbg(&host->pd->dev, "%s(): mapped %d -> %d, cookie %d\n",
+		__func__, host->data->sg_len, ret, cookie);
+
+	if (!desc) {
+		/* DMA failed, fall back to PIO */
+		if (ret >= 0)
+			ret = -EIO;
+		host->chan_tx = NULL;
+		host->dma_sglen = 0;
+		dma_release_channel(chan);
+		/* Free the Rx channel too */
+		chan = host->chan_rx;
+		if (chan) {
+			host->chan_rx = NULL;
+			dma_release_channel(chan);
+		}
+		dev_warn(&host->pd->dev,
+			 "DMA failed: %d, falling back to PIO\n", ret);
+		sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN | BUF_ACC_DMAWEN);
+	}
+
+	dev_dbg(&host->pd->dev, "%s(): desc %p, cookie %d\n", __func__,
+		desc, cookie);
+}
+
+static bool sh_mmcif_filter(struct dma_chan *chan, void *arg)
+{
+	dev_dbg(chan->device->dev, "%s: slave data %p\n", __func__, arg);
+	chan->private = arg;
+	return true;
+}
+
+static void sh_mmcif_request_dma(struct sh_mmcif_host *host,
+				 struct sh_mmcif_plat_data *pdata)
+{
+	host->dma_sglen = 0;
+
+	/* We can only either use DMA for both Tx and Rx or not use it at all */
+	if (pdata->dma) {
+		dma_cap_mask_t mask;
+
+		dma_cap_zero(mask);
+		dma_cap_set(DMA_SLAVE, mask);
+
+		host->chan_tx = dma_request_channel(mask, sh_mmcif_filter,
+						    &pdata->dma->chan_priv_tx);
+		dev_dbg(&host->pd->dev, "%s: TX: got channel %p\n", __func__,
+			host->chan_tx);
+
+		if (!host->chan_tx)
+			return;
+
+		host->chan_rx = dma_request_channel(mask, sh_mmcif_filter,
+						    &pdata->dma->chan_priv_rx);
+		dev_dbg(&host->pd->dev, "%s: RX: got channel %p\n", __func__,
+			host->chan_rx);
+
+		if (!host->chan_rx) {
+			dma_release_channel(host->chan_tx);
+			host->chan_tx = NULL;
+			return;
+		}
+
+		init_completion(&host->dma_complete);
+	}
+}
+
+static void sh_mmcif_release_dma(struct sh_mmcif_host *host)
+{
+	sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC, BUF_ACC_DMAREN | BUF_ACC_DMAWEN);
+	/* Descriptors are freed automatically */
+	if (host->chan_tx) {
+		struct dma_chan *chan = host->chan_tx;
+		host->chan_tx = NULL;
+		dma_release_channel(chan);
+	}
+	if (host->chan_rx) {
+		struct dma_chan *chan = host->chan_rx;
+		host->chan_rx = NULL;
+		dma_release_channel(chan);
+	}
+
+	host->dma_sglen = 0;
+}
 
 static void sh_mmcif_clock_control(struct sh_mmcif_host *host, unsigned int clk)
 {
@@ -239,13 +404,12 @@ static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
 	u32 state1, state2;
 	int ret, timeout = 10000000;
 
-	host->sd_error = 0;
-	host->wait_int = 0;
+	host->sd_error = false;
 
 	state1 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1);
 	state2 = sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS2);
-	pr_debug("%s: ERR HOST_STS1 = %08x\n", DRIVER_NAME, state1);
-	pr_debug("%s: ERR HOST_STS2 = %08x\n", DRIVER_NAME, state2);
+	dev_dbg(&host->pd->dev, "ERR HOST_STS1 = %08x\n", state1);
+	dev_dbg(&host->pd->dev, "ERR HOST_STS2 = %08x\n", state2);
 
 	if (state1 & STS1_CMDSEQ) {
 		sh_mmcif_bitset(host, MMCIF_CE_CMD_CTRL, CMD_CTRL_BREAK);
@@ -253,8 +417,8 @@ static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
 		while (1) {
 			timeout--;
 			if (timeout < 0) {
-				pr_err(DRIVER_NAME": Forceed end of " \
-					"command sequence timeout err\n");
+				dev_err(&host->pd->dev,
+					"Forceed end of command sequence timeout err\n");
 				return -EIO;
 			}
 			if (!(sh_mmcif_readl(host->addr, MMCIF_CE_HOST_STS1)
@@ -263,18 +427,18 @@ static int sh_mmcif_error_manage(struct sh_mmcif_host *host)
 			mdelay(1);
 		}
 		sh_mmcif_sync_reset(host);
-		pr_debug(DRIVER_NAME": Forced end of command sequence\n");
+		dev_dbg(&host->pd->dev, "Forced end of command sequence\n");
 		return -EIO;
 	}
 
 	if (state2 & STS2_CRC_ERR) {
-		pr_debug(DRIVER_NAME": Happened CRC error\n");
+		dev_dbg(&host->pd->dev, ": Happened CRC error\n");
 		ret = -EIO;
 	} else if (state2 & STS2_TIMEOUT_ERR) {
-		pr_debug(DRIVER_NAME": Happened Timeout error\n");
+		dev_dbg(&host->pd->dev, ": Happened Timeout error\n");
 		ret = -ETIMEDOUT;
 	} else {
-		pr_debug(DRIVER_NAME": Happened End/Index error\n");
+		dev_dbg(&host->pd->dev, ": Happened End/Index error\n");
 		ret = -EIO;
 	}
 	return ret;
@@ -287,17 +451,13 @@ static int sh_mmcif_single_read(struct sh_mmcif_host *host,
 	long time;
 	u32 blocksize, i, *p = sg_virt(data->sg);
 
-	host->wait_int = 0;
-
 	/* buf read enable */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
-	time = wait_event_interruptible_timeout(host->intr_wait,
-			host->wait_int == 1 ||
-			host->sd_error == 1, host->timeout);
-	if (host->wait_int != 1 && (time == 0 || host->sd_error != 0))
+	time = wait_for_completion_interruptible_timeout(&host->intr_wait,
+			host->timeout);
+	if (time <= 0 || host->sd_error)
 		return sh_mmcif_error_manage(host);
 
-	host->wait_int = 0;
 	blocksize = (BLOCK_SIZE_MASK &
 			sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3;
 	for (i = 0; i < blocksize / 4; i++)
@@ -305,13 +465,11 @@ static int sh_mmcif_single_read(struct sh_mmcif_host *host,
 
 	/* buffer read end */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFRE);
-	time = wait_event_interruptible_timeout(host->intr_wait,
-			host->wait_int == 1 ||
-			host->sd_error == 1, host->timeout);
-	if (host->wait_int != 1 && (time == 0 || host->sd_error != 0))
+	time = wait_for_completion_interruptible_timeout(&host->intr_wait,
+			host->timeout);
+	if (time <= 0 || host->sd_error)
 		return sh_mmcif_error_manage(host);
 
-	host->wait_int = 0;
 	return 0;
 }
 
@@ -326,19 +484,15 @@ static int sh_mmcif_multi_read(struct sh_mmcif_host *host,
 						     MMCIF_CE_BLOCK_SET);
 	for (j = 0; j < data->sg_len; j++) {
 		p = sg_virt(data->sg);
-		host->wait_int = 0;
 		for (sec = 0; sec < data->sg->length / blocksize; sec++) {
 			sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFREN);
 			/* buf read enable */
-			time = wait_event_interruptible_timeout(host->intr_wait,
-				host->wait_int == 1 ||
-				host->sd_error == 1, host->timeout);
+			time = wait_for_completion_interruptible_timeout(&host->intr_wait,
+				host->timeout);
 
-			if (host->wait_int != 1 &&
-			    (time == 0 || host->sd_error != 0))
+			if (time <= 0 || host->sd_error)
 				return sh_mmcif_error_manage(host);
 
-			host->wait_int = 0;
 			for (i = 0; i < blocksize / 4; i++)
 				*p++ = sh_mmcif_readl(host->addr,
 						      MMCIF_CE_DATA);
@@ -356,17 +510,14 @@ static int sh_mmcif_single_write(struct sh_mmcif_host *host,
 	long time;
 	u32 blocksize, i, *p = sg_virt(data->sg);
 
-	host->wait_int = 0;
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
 
 	/* buf write enable */
-	time = wait_event_interruptible_timeout(host->intr_wait,
-			host->wait_int == 1 ||
-			host->sd_error == 1, host->timeout);
-	if (host->wait_int != 1 && (time == 0 || host->sd_error != 0))
+	time = wait_for_completion_interruptible_timeout(&host->intr_wait,
+			host->timeout);
+	if (time <= 0 || host->sd_error)
 		return sh_mmcif_error_manage(host);
 
-	host->wait_int = 0;
 	blocksize = (BLOCK_SIZE_MASK &
 			sh_mmcif_readl(host->addr, MMCIF_CE_BLOCK_SET)) + 3;
 	for (i = 0; i < blocksize / 4; i++)
@@ -375,13 +526,11 @@ static int sh_mmcif_single_write(struct sh_mmcif_host *host,
 	/* buffer write end */
 	sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MDTRANE);
 
-	time = wait_event_interruptible_timeout(host->intr_wait,
-			host->wait_int == 1 ||
-			host->sd_error == 1, host->timeout);
-	if (host->wait_int != 1 && (time == 0 || host->sd_error != 0))
+	time = wait_for_completion_interruptible_timeout(&host->intr_wait,
+			host->timeout);
+	if (time <= 0 || host->sd_error)
 		return sh_mmcif_error_manage(host);
 
-	host->wait_int = 0;
 	return 0;
 }
 
@@ -397,19 +546,15 @@ static int sh_mmcif_multi_write(struct sh_mmcif_host *host,
 
 	for (j = 0; j < data->sg_len; j++) {
 		p = sg_virt(data->sg);
-		host->wait_int = 0;
 		for (sec = 0; sec < data->sg->length / blocksize; sec++) {
 			sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MBUFWEN);
 			/* buf write enable*/
-			time = wait_event_interruptible_timeout(host->intr_wait,
-				host->wait_int == 1 ||
-				host->sd_error == 1, host->timeout);
+			time = wait_for_completion_interruptible_timeout(&host->intr_wait,
+				host->timeout);
 
-			if (host->wait_int != 1 &&
-			    (time == 0 || host->sd_error != 0))
+			if (time <= 0 || host->sd_error)
 				return sh_mmcif_error_manage(host);
 
-			host->wait_int = 0;
 			for (i = 0; i < blocksize / 4; i++)
 				sh_mmcif_writel(host->addr,
 						MMCIF_CE_DATA, *p++);
@@ -457,7 +602,7 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
 		tmp |= CMD_SET_RTYP_17B;
 		break;
 	default:
-		pr_err(DRIVER_NAME": Not support type response.\n");
+		dev_err(&host->pd->dev, "Unsupported response type.\n");
 		break;
 	}
 	switch (opc) {
@@ -485,7 +630,7 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
 			tmp |= CMD_SET_DATW_8;
 			break;
 		default:
-			pr_err(DRIVER_NAME": Not support bus width.\n");
+			dev_err(&host->pd->dev, "Unsupported bus width.\n");
 			break;
 		}
 	}
@@ -513,10 +658,10 @@ static u32 sh_mmcif_set_cmd(struct sh_mmcif_host *host,
 	return opc = ((opc << 24) | tmp);
 }
 
-static u32 sh_mmcif_data_trans(struct sh_mmcif_host *host,
+static int sh_mmcif_data_trans(struct sh_mmcif_host *host,
 				struct mmc_request *mrq, u32 opc)
 {
-	u32 ret;
+	int ret;
 
 	switch (opc) {
 	case MMC_READ_MULTIPLE_BLOCK:
@@ -533,7 +678,7 @@ static u32 sh_mmcif_data_trans(struct sh_mmcif_host *host,
 		ret = sh_mmcif_single_read(host, mrq);
 		break;
 	default:
-		pr_err(DRIVER_NAME": NOT SUPPORT CMD = d'%08d\n", opc);
+		dev_err(&host->pd->dev, "UNSUPPORTED CMD = d'%08d\n", opc);
 		ret = -EINVAL;
 		break;
 	}
@@ -547,8 +692,6 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
 	int ret = 0, mask = 0;
 	u32 opc = cmd->opcode;
 
-	host->cmd = cmd;
-
 	switch (opc) {
 	/* respons busy check */
 	case MMC_SWITCH:
@@ -579,13 +722,12 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
 	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, mask);
 	/* set arg */
 	sh_mmcif_writel(host->addr, MMCIF_CE_ARG, cmd->arg);
-	host->wait_int = 0;
 	/* set cmd */
 	sh_mmcif_writel(host->addr, MMCIF_CE_CMD_SET, opc);
 
-	time = wait_event_interruptible_timeout(host->intr_wait,
-		host->wait_int == 1 || host->sd_error == 1, host->timeout);
-	if (host->wait_int != 1 && time == 0) {
+	time = wait_for_completion_interruptible_timeout(&host->intr_wait,
+		host->timeout);
+	if (time <= 0) {
 		cmd->error = sh_mmcif_error_manage(host);
 		return;
 	}
@@ -597,26 +739,34 @@ static void sh_mmcif_start_cmd(struct sh_mmcif_host *host,
 			cmd->error = -ETIMEDOUT;
 			break;
 		default:
-			pr_debug("%s: Cmd(d'%d) err\n",
-					DRIVER_NAME, cmd->opcode);
+			dev_dbg(&host->pd->dev, "Cmd(d'%d) err\n",
+					cmd->opcode);
 			cmd->error = sh_mmcif_error_manage(host);
 			break;
 		}
-		host->sd_error = 0;
-		host->wait_int = 0;
+		host->sd_error = false;
 		return;
 	}
 	if (!(cmd->flags & MMC_RSP_PRESENT)) {
-		cmd->error = ret;
-		host->wait_int = 0;
+		cmd->error = 0;
 		return;
 	}
-	if (host->wait_int == 1) {
-		sh_mmcif_get_response(host, cmd);
-		host->wait_int = 0;
-	}
+	sh_mmcif_get_response(host, cmd);
 	if (host->data) {
-		ret = sh_mmcif_data_trans(host, mrq, cmd->opcode);
+		if (!host->dma_sglen) {
+			ret = sh_mmcif_data_trans(host, mrq, cmd->opcode);
+		} else {
+			long time =
+				wait_for_completion_interruptible_timeout(&host->dma_complete,
+									  host->timeout);
+			if (!time)
+				ret = -ETIMEDOUT;
+			else if (time < 0)
+				ret = time;
+			sh_mmcif_bitclr(host, MMCIF_CE_BUF_ACC,
+					BUF_ACC_DMAREN | BUF_ACC_DMAWEN);
+			host->dma_sglen = 0;
+		}
 		if (ret < 0)
 			mrq->data->bytes_xfered = 0;
 		else
@@ -636,20 +786,18 @@ static void sh_mmcif_stop_cmd(struct sh_mmcif_host *host,
 	else if (mrq->cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK)
 		sh_mmcif_bitset(host, MMCIF_CE_INT_MASK, MASK_MCMD12RBE);
 	else {
-		pr_err(DRIVER_NAME": not support stop cmd\n");
+		dev_err(&host->pd->dev, "unsupported stop cmd\n");
 		cmd->error = sh_mmcif_error_manage(host);
 		return;
 	}
 
-	time = wait_event_interruptible_timeout(host->intr_wait,
-			host->wait_int == 1 ||
-			host->sd_error == 1, host->timeout);
-	if (host->wait_int != 1 && (time == 0 || host->sd_error != 0)) {
+	time = wait_for_completion_interruptible_timeout(&host->intr_wait,
+			host->timeout);
+	if (time <= 0 || host->sd_error) {
 		cmd->error = sh_mmcif_error_manage(host);
 		return;
 	}
 	sh_mmcif_get_cmd12response(host, cmd);
-	host->wait_int = 0;
 	cmd->error = 0;
 }
 
@@ -676,6 +824,15 @@ static void sh_mmcif_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		break;
 	}
 	host->data = mrq->data;
+	if (mrq->data) {
+		if (mrq->data->flags & MMC_DATA_READ) {
+			if (host->chan_rx)
+				sh_mmcif_start_dma_rx(host);
+		} else {
+			if (host->chan_tx)
+				sh_mmcif_start_dma_tx(host);
+		}
+	}
 	sh_mmcif_start_cmd(host, mrq, mrq->cmd);
 	host->data = NULL;
 
@@ -735,7 +892,7 @@ static void sh_mmcif_detect(struct mmc_host *mmc)
 static irqreturn_t sh_mmcif_intr(int irq, void *dev_id)
 {
 	struct sh_mmcif_host *host = dev_id;
-	u32 state = 0;
+	u32 state;
 	int err = 0;
 
 	state = sh_mmcif_readl(host->addr, MMCIF_CE_INT);
@@ -774,17 +931,19 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id)
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
 		err = 1;
 	} else {
-		pr_debug("%s: Not support int\n", DRIVER_NAME);
+		dev_dbg(&host->pd->dev, "Not support int\n");
 		sh_mmcif_writel(host->addr, MMCIF_CE_INT, ~state);
 		sh_mmcif_bitclr(host, MMCIF_CE_INT_MASK, state);
 		err = 1;
 	}
 	if (err) {
-		host->sd_error = 1;
-		pr_debug("%s: int err state = %08x\n", DRIVER_NAME, state);
+		host->sd_error = true;
+		dev_dbg(&host->pd->dev, "int err state = %08x\n", state);
 	}
-	host->wait_int = 1;
-	wake_up(&host->intr_wait);
+	if (state & ~(INT_CMD12RBE | INT_CMD12CRE))
+		complete(&host->intr_wait);
+	else
+		dev_dbg(&host->pd->dev, "Unexpected IRQ 0x%x\n", state);
 
 	return IRQ_HANDLED;
 }
@@ -793,8 +952,8 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
 {
 	int ret = 0, irq[2];
 	struct mmc_host *mmc;
-	struct sh_mmcif_host *host = NULL;
-	struct sh_mmcif_plat_data *pd = NULL;
+	struct sh_mmcif_host *host;
+	struct sh_mmcif_plat_data *pd;
 	struct resource *res;
 	void __iomem *reg;
 	char clk_name[8];
@@ -802,7 +961,7 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
 	irq[0] = platform_get_irq(pdev, 0);
 	irq[1] = platform_get_irq(pdev, 1);
 	if (irq[0] < 0 || irq[1] < 0) {
-		pr_err(DRIVER_NAME": Get irq error\n");
+		dev_err(&pdev->dev, "Get irq error\n");
 		return -ENXIO;
 	}
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -815,7 +974,7 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "ioremap error.\n");
 		return -ENOMEM;
 	}
-	pd = (struct sh_mmcif_plat_data *)(pdev->dev.platform_data);
+	pd = pdev->dev.platform_data;
 	if (!pd) {
 		dev_err(&pdev->dev, "sh_mmcif plat data error.\n");
 		ret = -ENXIO;
@@ -842,7 +1001,7 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
 	host->clk = clk_get_rate(host->hclk);
 	host->pd = pdev;
 
-	init_waitqueue_head(&host->intr_wait);
+	init_completion(&host->intr_wait);
 
 	mmc->ops = &sh_mmcif_ops;
 	mmc->f_max = host->clk;
@@ -858,33 +1017,37 @@ static int __devinit sh_mmcif_probe(struct platform_device *pdev)
 	mmc->caps = MMC_CAP_MMC_HIGHSPEED;
 	if (pd->caps)
 		mmc->caps |= pd->caps;
-	mmc->max_segs = 128;
+	mmc->max_segs = 32;
 	mmc->max_blk_size = 512;
-	mmc->max_blk_count = 65535;
-	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+	mmc->max_req_size = PAGE_CACHE_SIZE * mmc->max_segs;
+	mmc->max_blk_count = mmc->max_req_size / mmc->max_blk_size;
 	mmc->max_seg_size = mmc->max_req_size;
 
 	sh_mmcif_sync_reset(host);
 	platform_set_drvdata(pdev, host);
+
+	/* See if we also get DMA */
+	sh_mmcif_request_dma(host, pd);
+
 	mmc_add_host(mmc);
 
 	ret = request_irq(irq[0], sh_mmcif_intr, 0, "sh_mmc:error", host);
 	if (ret) {
-		pr_err(DRIVER_NAME": request_irq error (sh_mmc:error)\n");
+		dev_err(&pdev->dev, "request_irq error (sh_mmc:error)\n");
 		goto clean_up2;
 	}
 	ret = request_irq(irq[1], sh_mmcif_intr, 0, "sh_mmc:int", host);
 	if (ret) {
 		free_irq(irq[0], host);
-		pr_err(DRIVER_NAME": request_irq error (sh_mmc:int)\n");
+		dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n");
 		goto clean_up2;
 	}
 
 	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
 	sh_mmcif_detect(host->mmc);
 
-	pr_info("%s: driver version %s\n", DRIVER_NAME, DRIVER_VERSION);
-	pr_debug("%s: chip ver H'%04x\n", DRIVER_NAME,
+	dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION);
+	dev_dbg(&pdev->dev, "chip ver H'%04x\n",
 		sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff);
 	return ret;
 
@@ -903,20 +1066,22 @@ static int __devexit sh_mmcif_remove(struct platform_device *pdev)
 	struct sh_mmcif_host *host = platform_get_drvdata(pdev);
 	int irq[2];
 
-	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
-
-	irq[0] = platform_get_irq(pdev, 0);
-	irq[1] = platform_get_irq(pdev, 1);
+	mmc_remove_host(host->mmc);
+	sh_mmcif_release_dma(host);
 
 	if (host->addr)
 		iounmap(host->addr);
 
-	platform_set_drvdata(pdev, NULL);
-	mmc_remove_host(host->mmc);
+	sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL);
+
+	irq[0] = platform_get_irq(pdev, 0);
+	irq[1] = platform_get_irq(pdev, 1);
 
 	free_irq(irq[0], host);
 	free_irq(irq[1], host);
 
+	platform_set_drvdata(pdev, NULL);
+
 	clk_disable(host->hclk);
 	mmc_free_host(host->mmc);
 
@@ -947,5 +1112,5 @@ module_exit(sh_mmcif_exit);
 
 MODULE_DESCRIPTION("SuperH on-chip MMC/eMMC interface driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS(DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
 MODULE_AUTHOR("Yusuke Goda <yusuke.goda.sx@renesas.com>");
diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c
index b4ead4a13c9..f8f65df9b01 100644
--- a/drivers/mmc/host/ushc.c
+++ b/drivers/mmc/host/ushc.c
@@ -425,7 +425,7 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct usb_device *usb_dev = interface_to_usbdev(intf);
 	struct mmc_host *mmc;
 	struct ushc_data *ushc;
-	int ret = -ENOMEM;
+	int ret;
 
 	mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
 	if (mmc == NULL)
@@ -462,11 +462,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 	mmc->max_blk_count = 511;
 
 	ushc->int_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->int_urb == NULL)
+	if (ushc->int_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->int_data = kzalloc(sizeof(struct ushc_int_data), GFP_KERNEL);
-	if (ushc->int_data == NULL)
+	if (ushc->int_data == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_int_urb(ushc->int_urb, ushc->usb_dev,
 			 usb_rcvintpipe(usb_dev,
 					intf->cur_altsetting->endpoint[0].desc.bEndpointAddress),
@@ -475,11 +479,15 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 			 intf->cur_altsetting->endpoint[0].desc.bInterval);
 
 	ushc->cbw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->cbw_urb == NULL)
+	if (ushc->cbw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->cbw == NULL)
+	if (ushc->cbw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->cbw->signature = USHC_CBW_SIGNATURE;
 
 	usb_fill_bulk_urb(ushc->cbw_urb, ushc->usb_dev, usb_sndbulkpipe(usb_dev, 2),
@@ -487,15 +495,21 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 			  cbw_callback, ushc);
 
 	ushc->data_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->data_urb == NULL)
+	if (ushc->data_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 
 	ushc->csw_urb = usb_alloc_urb(0, GFP_KERNEL);
-	if (ushc->csw_urb == NULL)
+	if (ushc->csw_urb == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
-	if (ushc->csw == NULL)
+	if (ushc->csw == NULL) {
+		ret = -ENOMEM;
 		goto err;
+	}
 	usb_fill_bulk_urb(ushc->csw_urb, ushc->usb_dev, usb_rcvbulkpipe(usb_dev, 6),
 			  ushc->csw, sizeof(struct ushc_csw),
 			  csw_callback, ushc);
diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c
index dd90880048c..d8ae634d347 100644
--- a/drivers/mtd/maps/pxa2xx-flash.c
+++ b/drivers/mtd/maps/pxa2xx-flash.c
@@ -51,7 +51,7 @@ struct pxa2xx_flash_info {
 static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
 
 
-static int __init pxa2xx_flash_probe(struct platform_device *pdev)
+static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
 {
 	struct flash_platform_data *flash = pdev->dev.platform_data;
 	struct pxa2xx_flash_info *info;
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 4759d827e8c..f511dd15fd3 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -1201,7 +1201,7 @@ err_unregister_chdev:
 static void __exit cleanup_mtdchar(void)
 {
 	unregister_mtd_user(&mtdchar_notifier);
-	mntput(mtd_inode_mnt);
+	mntput_long(mtd_inode_mnt);
 	unregister_filesystem(&mtd_inodefs_type);
 	__unregister_chrdev(MTD_CHAR_MAJOR, 0, 1 << MINORBITS, "mtd");
 }
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index cd41c58b5bb..15682ec8530 100644
--- a/drivers/mtd/nand/omap2.c
+++ b/drivers/mtd/nand/omap2.c
@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define CONFIG_MTD_NAND_OMAP_HWECC
 
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 9f322f1a7f2..d0894ca7798 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -721,6 +721,9 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 	case 3:
 		c->freq = 83;
 		break;
+	case 4:
+		c->freq = 104;
+		break;
 	}
 
 #ifdef CONFIG_MTD_PARTITIONS
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index c2960ac9f39..811775aa8ee 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -482,10 +482,17 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
 	uint32_t data = 0;
 	struct ubi_vid_hdr vid_hdr;
 
-	addr = (loff_t)pnum * ubi->peb_size + ubi->vid_hdr_aloffset;
+	/*
+	 * It is important to first invalidate the EC header, and then the VID
+	 * header. Otherwise a power cut may lead to valid EC header and
+	 * invalid VID header, in which case UBI will treat this PEB as
+	 * corrupted and will try to preserve it, and print scary warnings (see
+	 * the header comment in scan.c for more information).
+	 */
+	addr = (loff_t)pnum * ubi->peb_size;
 	err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
 	if (!err) {
-		addr -= ubi->vid_hdr_aloffset;
+		addr += ubi->vid_hdr_aloffset;
 		err = ubi->mtd->write(ubi->mtd, addr, 4, &written,
 				      (void *)&data);
 		if (!err)
@@ -494,18 +501,24 @@ static int nor_erase_prepare(struct ubi_device *ubi, int pnum)
 
 	/*
 	 * We failed to write to the media. This was observed with Spansion
-	 * S29GL512N NOR flash. Most probably the eraseblock erasure was
-	 * interrupted at a very inappropriate moment, so it became unwritable.
-	 * In this case we probably anyway have garbage in this PEB.
+	 * S29GL512N NOR flash. Most probably the previously eraseblock erasure
+	 * was interrupted at a very inappropriate moment, so it became
+	 * unwritable. In this case we probably anyway have garbage in this
+	 * PEB.
 	 */
 	err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
-	if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
-		/*
-		 * The VID header is corrupted, so we can safely erase this
-		 * PEB and not afraid that it will be treated as a valid PEB in
-		 * case of an unclean reboot.
-		 */
-		return 0;
+	if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR) {
+		struct ubi_ec_hdr ec_hdr;
+
+		err1 = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0);
+		if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
+			/*
+			 * Both VID and EC headers are corrupted, so we can
+			 * safely erase this PEB and not afraid that it will be
+			 * treated as a valid PEB in case of an unclean reboot.
+			 */
+			return 0;
+	}
 
 	/*
 	 * The PEB contains a valid VID header, but we cannot invalidate it.
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 3c631863bf4..79ca304fc4d 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -787,16 +787,15 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
 		 * erased, so it became unstable and corrupted, and should be
 		 * erased.
 		 */
-		return 0;
+		err = 0;
+		goto out_unlock;
 	}
 
 	if (err)
-		return err;
+		goto out_unlock;
 
-	if (ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->leb_size)) {
-		mutex_unlock(&ubi->buf_mutex);
-		return 0;
-	}
+	if (ubi_check_pattern(ubi->peb_buf1, 0xFF, ubi->leb_size))
+		goto out_unlock;
 
 	ubi_err("PEB %d contains corrupted VID header, and the data does not "
 		"contain all 0xFF, this may be a non-UBI PEB or a severe VID "
@@ -806,8 +805,11 @@ static int check_corruption(struct ubi_device *ubi, struct ubi_vid_hdr *vid_hdr,
 		pnum, ubi->leb_start, ubi->leb_size);
 	ubi_dbg_print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 32, 1,
 			       ubi->peb_buf1, ubi->leb_size, 1);
+	err = 1;
+
+out_unlock:
 	mutex_unlock(&ubi->buf_mutex);
-	return 1;
+	return err;
 }
 
 /**
@@ -951,6 +953,10 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
 			 * impossible to distinguish it from a PEB which just
 			 * contains garbage because of a power cut during erase
 			 * operation. So we just schedule this PEB for erasure.
+			 *
+			 * Besides, in case of NOR flash, we deliberatly
+			 * corrupt both headers because NOR flash erasure is
+			 * slow and can start from the end.
 			 */
 			err = 0;
 		else
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index 1776ab61b05..9e1c03eb97a 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -158,8 +158,8 @@ static int mem_start;
 struct net_device * __init el1_probe(int unit)
 {
 	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
-	static unsigned ports[] = { 0x280, 0x300, 0};
-	unsigned *port;
+	static const unsigned ports[] = { 0x280, 0x300, 0};
+	const unsigned *port;
 	int err = 0;
 
 	if (!dev)
diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c
index 4777a1cbcd8..d84f6e8903a 100644
--- a/drivers/net/3c503.c
+++ b/drivers/net/3c503.c
@@ -392,8 +392,8 @@ el2_open(struct net_device *dev)
     int retval;
 
     if (dev->irq < 2) {
-	int irqlist[] = {5, 9, 3, 4, 0};
-	int *irqp = irqlist;
+	static const int irqlist[] = {5, 9, 3, 4, 0};
+	const int *irqp = irqlist;
 
 	outb(EGACFR_NORM, E33G_GACFR);	/* Enable RAM and interrupts. */
 	do {
diff --git a/drivers/net/3c507.c b/drivers/net/3c507.c
index 475a66d95b3..1e945551c14 100644
--- a/drivers/net/3c507.c
+++ b/drivers/net/3c507.c
@@ -311,8 +311,8 @@ static int mem_start;
 struct net_device * __init el16_probe(int unit)
 {
 	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
-	static unsigned ports[] = { 0x300, 0x320, 0x340, 0x280, 0};
-	unsigned *port;
+	static const unsigned ports[] = { 0x300, 0x320, 0x340, 0x280, 0};
+	const unsigned *port;
 	int err = -ENODEV;
 
 	if (!dev)
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 013b7c39666..8c094bae8bf 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -317,13 +317,13 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 	u8 POS;
 	u32 base;
 	struct mc32_local *lp = netdev_priv(dev);
-	static u16 mca_io_bases[]={
+	static const u16 mca_io_bases[] = {
 		0x7280,0x7290,
 		0x7680,0x7690,
 		0x7A80,0x7A90,
 		0x7E80,0x7E90
 	};
-	static u32 mca_mem_bases[]={
+	static const u32 mca_mem_bases[] = {
 		0x00C0000,
 		0x00C4000,
 		0x00C8000,
@@ -333,7 +333,7 @@ static int __init mc32_probe1(struct net_device *dev, int slot)
 		0x00D8000,
 		0x00DC000
 	};
-	static char *failures[]={
+	static const char * const failures[] = {
 		"Processor instruction",
 		"Processor data bus",
 		"Processor data bus",
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index e1da258bbfb..0a92436f053 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -699,7 +699,8 @@ DEFINE_WINDOW_IO(32)
 #define DEVICE_PCI(dev) NULL
 #endif
 
-#define VORTEX_PCI(vp) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL)
+#define VORTEX_PCI(vp)							\
+	((struct pci_dev *) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL))
 
 #ifdef CONFIG_EISA
 #define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL)
@@ -707,7 +708,8 @@ DEFINE_WINDOW_IO(32)
 #define DEVICE_EISA(dev) NULL
 #endif
 
-#define VORTEX_EISA(vp) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL)
+#define VORTEX_EISA(vp)							\
+	((struct eisa_device *) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL))
 
 /* The action to take with a media selection timer tick.
    Note that we deviate from the 3Com order by checking 10base2 before AUI.
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index ac422cd332e..dd16e83933a 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -490,13 +490,11 @@ static inline unsigned int cp_rx_csum_ok (u32 status)
 {
 	unsigned int protocol = (status >> 16) & 0x3;
 
-	if (likely((protocol == RxProtoTCP) && (!(status & TCPFail))))
+	if (((protocol == RxProtoTCP) && !(status & TCPFail)) ||
+	    ((protocol == RxProtoUDP) && !(status & UDPFail)))
 		return 1;
-	else if ((protocol == RxProtoUDP) && (!(status & UDPFail)))
-		return 1;
-	else if ((protocol == RxProtoIP) && (!(status & IPFail)))
-		return 1;
-	return 0;
+	else
+		return 0;
 }
 
 static int cp_rx_poll(struct napi_struct *napi, int budget)
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index f5166dccd8d..98517a37347 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -1092,10 +1092,11 @@ err_out:
 static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata (pdev);
+	struct rtl8139_private *tp = netdev_priv(dev);
 
 	assert (dev != NULL);
 
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&tp->thread);
 
 	unregister_netdev (dev);
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index fa62a63db16..3fda24a28d2 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1533,7 +1533,7 @@ config E100
 
 	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
 
-          to identify the adapter.
+	  to identify the adapter.
 
 	  For the latest Intel PRO/100 network driver for Linux, see:
 
@@ -1786,17 +1786,17 @@ config KS8842
 	tristate "Micrel KSZ8841/42 with generic bus interface"
 	depends on HAS_IOMEM && DMA_ENGINE
 	help
-	 This platform driver is for KSZ8841(1-port) / KS8842(2-port)
-	 ethernet switch chip (managed, VLAN, QoS) from Micrel or
-	 Timberdale(FPGA).
+	  This platform driver is for KSZ8841(1-port) / KS8842(2-port)
+	  ethernet switch chip (managed, VLAN, QoS) from Micrel or
+	  Timberdale(FPGA).
 
 config KS8851
-       tristate "Micrel KS8851 SPI"
-       depends on SPI
-       select MII
+	tristate "Micrel KS8851 SPI"
+	depends on SPI
+	select MII
 	select CRC32
-       help
-         SPI driver for Micrel KS8851 SPI attached network chip.
+	help
+	  SPI driver for Micrel KS8851 SPI attached network chip.
 
 config KS8851_MLL
 	tristate "Micrel KS8851 MLL"
@@ -2133,25 +2133,25 @@ config IP1000
 	  will be called ipg.  This is recommended.
 
 config IGB
-       tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
-       depends on PCI
-       ---help---
-         This driver supports Intel(R) 82575/82576 gigabit ethernet family of
-         adapters.  For more information on how to identify your adapter, go
-         to the Adapter & Driver ID Guide at:
+	tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) 82575/82576 gigabit ethernet family of
+	  adapters.  For more information on how to identify your adapter, go
+	  to the Adapter & Driver ID Guide at:
 
-         <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
 
-         For general information and support, go to the Intel support
-         website at:
+	  For general information and support, go to the Intel support
+	  website at:
 
-         <http://support.intel.com>
+	  <http://support.intel.com>
 
-         More specific information on configuring the driver is in
-         <file:Documentation/networking/e1000.txt>.
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/e1000.txt>.
 
-         To compile this driver as a module, choose M here. The module
-         will be called igb.
+	  To compile this driver as a module, choose M here. The module
+	  will be called igb.
 
 config IGB_DCA
 	bool "Direct Cache Access (DCA) Support"
@@ -2163,25 +2163,25 @@ config IGB_DCA
 	  is used, with the intent of lessening the impact of cache misses.
 
 config IGBVF
-       tristate "Intel(R) 82576 Virtual Function Ethernet support"
-       depends on PCI
-       ---help---
-         This driver supports Intel(R) 82576 virtual functions.  For more
-         information on how to identify your adapter, go to the Adapter &
-         Driver ID Guide at:
+	tristate "Intel(R) 82576 Virtual Function Ethernet support"
+	depends on PCI
+	---help---
+	  This driver supports Intel(R) 82576 virtual functions.  For more
+	  information on how to identify your adapter, go to the Adapter &
+	  Driver ID Guide at:
 
-         <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+	  <http://support.intel.com/support/network/adapter/pro100/21397.htm>
 
-         For general information and support, go to the Intel support
-         website at:
+	  For general information and support, go to the Intel support
+	  website at:
 
-         <http://support.intel.com>
+	  <http://support.intel.com>
 
-         More specific information on configuring the driver is in
-         <file:Documentation/networking/e1000.txt>.
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/e1000.txt>.
 
-         To compile this driver as a module, choose M here. The module
-         will be called igbvf.
+	  To compile this driver as a module, choose M here. The module
+	  will be called igbvf.
 
 source "drivers/net/ixp2000/Kconfig"
 
@@ -2233,6 +2233,7 @@ config YELLOWFIN
 config R8169
 	tristate "Realtek 8169 gigabit ethernet support"
 	depends on PCI
+	select FW_LOADER
 	select CRC32
 	select MII
 	---help---
@@ -2300,14 +2301,14 @@ config SKGE
 	  will be called skge.  This is recommended.
 
 config SKGE_DEBUG
-       bool "Debugging interface"
-       depends on SKGE && DEBUG_FS
-       help
-	 This option adds the ability to dump driver state for debugging.
-	 The file /sys/kernel/debug/skge/ethX displays the state of the internal
-	 transmit and receive rings.
+	bool "Debugging interface"
+	depends on SKGE && DEBUG_FS
+	help
+	  This option adds the ability to dump driver state for debugging.
+	  The file /sys/kernel/debug/skge/ethX displays the state of the internal
+	  transmit and receive rings.
 
-	 If unsure, say N.
+	  If unsure, say N.
 
 config SKY2
 	tristate "SysKonnect Yukon2 support"
@@ -2326,14 +2327,14 @@ config SKY2
 	  will be called sky2.  This is recommended.
 
 config SKY2_DEBUG
-       bool "Debugging interface"
-       depends on SKY2 && DEBUG_FS
-       help
-	 This option adds the ability to dump driver state for debugging.
-	 The file /sys/kernel/debug/sky2/ethX displays the state of the internal
-	 transmit and receive rings.
+	bool "Debugging interface"
+	depends on SKY2 && DEBUG_FS
+	help
+	  This option adds the ability to dump driver state for debugging.
+	  The file /sys/kernel/debug/sky2/ethX displays the state of the internal
+	  transmit and receive rings.
 
-	 If unsure, say N.
+	  If unsure, say N.
 
 config VIA_VELOCITY
 	tristate "VIA Velocity support"
@@ -2389,12 +2390,12 @@ config SPIDER_NET
 	  Cell Processor-Based Blades from IBM.
 
 config TSI108_ETH
-	   tristate "Tundra TSI108 gigabit Ethernet support"
-	   depends on TSI108_BRIDGE
-	   help
-	     This driver supports Tundra TSI108 gigabit Ethernet ports.
-	     To compile this driver as a module, choose M here: the module
-	     will be called tsi108_eth.
+	tristate "Tundra TSI108 gigabit Ethernet support"
+	depends on TSI108_BRIDGE
+	help
+	  This driver supports Tundra TSI108 gigabit Ethernet ports.
+	  To compile this driver as a module, choose M here: the module
+	  will be called tsi108_eth.
 
 config GELIC_NET
 	tristate "PS3 Gigabit Ethernet driver"
@@ -2543,10 +2544,10 @@ config PCH_GBE
 	depends on PCI
 	select MII
 	---help---
-	  This is a gigabit ethernet driver for Topcliff PCH.
-	  Topcliff PCH is the platform controller hub that is used in Intel's
+	  This is a gigabit ethernet driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
 	  general embedded platform.
-	  Topcliff PCH has Gigabit Ethernet interface.
+	  EG20T PCH has Gigabit Ethernet interface.
 	  Using this interface, it is able to access system devices connected
 	  to Gigabit Ethernet.
 	  This driver enables Gigabit Ethernet function.
@@ -2573,32 +2574,32 @@ config MDIO
 	tristate
 
 config CHELSIO_T1
-        tristate "Chelsio 10Gb Ethernet support"
-        depends on PCI
+	tristate "Chelsio 10Gb Ethernet support"
+	depends on PCI
 	select CRC32
 	select MDIO
-        help
-          This driver supports Chelsio gigabit and 10-gigabit
-          Ethernet cards. More information about adapter features and
+	help
+	  This driver supports Chelsio gigabit and 10-gigabit
+	  Ethernet cards. More information about adapter features and
 	  performance tuning is in <file:Documentation/networking/cxgb.txt>.
 
-          For general information about Chelsio and our products, visit
-          our website at <http://www.chelsio.com>.
+	  For general information about Chelsio and our products, visit
+	  our website at <http://www.chelsio.com>.
 
-          For customer support, please visit our customer support page at
-          <http://www.chelsio.com/support.html>.
+	  For customer support, please visit our customer support page at
+	  <http://www.chelsio.com/support.html>.
 
-          Please send feedback to <linux-bugs@chelsio.com>.
+	  Please send feedback to <linux-bugs@chelsio.com>.
 
-          To compile this driver as a module, choose M here: the module
-          will be called cxgb.
+	  To compile this driver as a module, choose M here: the module
+	  will be called cxgb.
 
 config CHELSIO_T1_1G
-        bool "Chelsio gigabit Ethernet support"
-        depends on CHELSIO_T1
-        help
-          Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
-          are using only 10G cards say 'N' here.
+	bool "Chelsio gigabit Ethernet support"
+	depends on CHELSIO_T1
+	help
+	  Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
+	  are using only 10G cards say 'N' here.
 
 config CHELSIO_T3_DEPENDS
 	tristate
@@ -2728,26 +2729,26 @@ config IXGBE_DCB
 	  If unsure, say N.
 
 config IXGBEVF
-       tristate "Intel(R) 82599 Virtual Function Ethernet support"
-       depends on PCI_MSI
-       ---help---
-         This driver supports Intel(R) 82599 virtual functions.  For more
-         information on how to identify your adapter, go to the Adapter &
-         Driver ID Guide at:
+	tristate "Intel(R) 82599 Virtual Function Ethernet support"
+	depends on PCI_MSI
+	---help---
+	  This driver supports Intel(R) 82599 virtual functions.  For more
+	  information on how to identify your adapter, go to the Adapter &
+	  Driver ID Guide at:
 
-         <http://support.intel.com/support/network/sb/CS-008441.htm>
+	  <http://support.intel.com/support/network/sb/CS-008441.htm>
 
-         For general information and support, go to the Intel support
-         website at:
+	  For general information and support, go to the Intel support
+	  website at:
 
-         <http://support.intel.com>
+	  <http://support.intel.com>
 
-         More specific information on configuring the driver is in
-         <file:Documentation/networking/ixgbevf.txt>.
+	  More specific information on configuring the driver is in
+	  <file:Documentation/networking/ixgbevf.txt>.
 
-         To compile this driver as a module, choose M here. The module
-         will be called ixgbevf.  MSI-X interrupt support is required
-         for this driver to work correctly.
+	  To compile this driver as a module, choose M here. The module
+	  will be called ixgbevf.  MSI-X interrupt support is required
+	  for this driver to work correctly.
 
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
@@ -2915,18 +2916,18 @@ config QLGE
 	  will be called qlge.
 
 config BNA
-        tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
-        depends on PCI
-        ---help---
-          This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
-          cards.
-          To compile this driver as a module, choose M here: the module
-          will be called bna.
+	tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
+	depends on PCI
+	---help---
+	  This driver supports Brocade 1010/1020 10Gb CEE capable Ethernet
+	  cards.
+	  To compile this driver as a module, choose M here: the module
+	  will be called bna.
 
-          For general information and support, go to the Brocade support
-          website at:
+	  For general information and support, go to the Brocade support
+	  website at:
 
-          <http://support.brocade.com>
+	  <http://support.brocade.com>
 
 source "drivers/net/sfc/Kconfig"
 
@@ -2954,6 +2955,18 @@ source "drivers/s390/net/Kconfig"
 
 source "drivers/net/caif/Kconfig"
 
+config TILE_NET
+	tristate "Tilera GBE/XGBE network driver support"
+	depends on TILE
+	default y
+	select CRC32
+	help
+	  This is a standard Linux network device driver for the
+	  on-chip Tilera Gigabit Ethernet and XAUI interfaces.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called tile_net.
+
 config XEN_NETDEV_FRONTEND
 	tristate "Xen network device frontend driver"
 	depends on XEN
@@ -3236,18 +3249,18 @@ config PPP_BSDCOMP
 	  modules once you have said "make modules". If unsure, say N.
 
 config PPP_MPPE
-       tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
-       depends on PPP && EXPERIMENTAL
-       select CRYPTO
-       select CRYPTO_SHA1
-       select CRYPTO_ARC4
-       select CRYPTO_ECB
-       ---help---
-         Support for the MPPE Encryption protocol, as employed by the
-	 Microsoft Point-to-Point Tunneling Protocol.
-
-	 See http://pptpclient.sourceforge.net/ for information on
-	 configuring PPTP clients and servers to utilize this method.
+	tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
+	depends on PPP && EXPERIMENTAL
+	select CRYPTO
+	select CRYPTO_SHA1
+	select CRYPTO_ARC4
+	select CRYPTO_ECB
+	---help---
+	  Support for the MPPE Encryption protocol, as employed by the
+	  Microsoft Point-to-Point Tunneling Protocol.
+
+	  See http://pptpclient.sourceforge.net/ for information on
+	  configuring PPTP clients and servers to utilize this method.
 
 config PPPOE
 	tristate "PPP over Ethernet (EXPERIMENTAL)"
@@ -3406,14 +3419,14 @@ config VIRTIO_NET
 	depends on EXPERIMENTAL && VIRTIO
 	---help---
 	  This is the virtual network driver for virtio.  It can be used with
-          lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
+	  lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
 
 config VMXNET3
-       tristate "VMware VMXNET3 ethernet driver"
-       depends on PCI && INET
-       help
-         This driver supports VMware's vmxnet3 virtual ethernet NIC.
-         To compile this driver as a module, choose M here: the
-         module will be called vmxnet3.
+	tristate "VMware VMXNET3 ethernet driver"
+	depends on PCI && INET
+	help
+	  This driver supports VMware's vmxnet3 virtual ethernet NIC.
+	  To compile this driver as a module, choose M here: the
+	  module will be called vmxnet3.
 
 endif # NETDEVICES
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 652fc6b9803..b90738d1399 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -301,3 +301,4 @@ obj-$(CONFIG_CAIF) += caif/
 
 obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
 obj-$(CONFIG_PCH_GBE) += pch_gbe/
+obj-$(CONFIG_TILE_NET) += tile/
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 9bb405bd664..068c3563e00 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -55,8 +55,6 @@ extern struct net_device *eth16i_probe(int unit);
 extern struct net_device *i82596_probe(int unit);
 extern struct net_device *ewrk3_probe(int unit);
 extern struct net_device *el1_probe(int unit);
-extern struct net_device *wavelan_probe(int unit);
-extern struct net_device *arlan_probe(int unit);
 extern struct net_device *el16_probe(int unit);
 extern struct net_device *elmc_probe(int unit);
 extern struct net_device *elplus_probe(int unit);
@@ -68,7 +66,6 @@ extern struct net_device *ni5010_probe(int unit);
 extern struct net_device *ni52_probe(int unit);
 extern struct net_device *ni65_probe(int unit);
 extern struct net_device *sonic_probe(int unit);
-extern struct net_device *SK_init(int unit);
 extern struct net_device *seeq8005_probe(int unit);
 extern struct net_device *smc_init(int unit);
 extern struct net_device *atarilance_probe(int unit);
@@ -76,8 +73,6 @@ extern struct net_device *sun3lance_probe(int unit);
 extern struct net_device *sun3_82586_probe(int unit);
 extern struct net_device *apne_probe(int unit);
 extern struct net_device *cs89x0_probe(int unit);
-extern struct net_device *hplance_probe(int unit);
-extern struct net_device *bagetlance_probe(int unit);
 extern struct net_device *mvme147lance_probe(int unit);
 extern struct net_device *tc515_probe(int unit);
 extern struct net_device *lance_probe(int unit);
diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c
index 62f21106efe..0c9217f48b7 100644
--- a/drivers/net/arm/am79c961a.c
+++ b/drivers/net/arm/am79c961a.c
@@ -340,14 +340,6 @@ am79c961_close(struct net_device *dev)
 	return 0;
 }
 
-/*
- * Get the current statistics.
- */
-static struct net_device_stats *am79c961_getstats (struct net_device *dev)
-{
-	return &dev->stats;
-}
-
 static void am79c961_mc_hash(char *addr, unsigned short *hash)
 {
 	if (addr[0] & 0x01) {
@@ -665,7 +657,6 @@ static const struct net_device_ops am79c961_netdev_ops = {
 	.ndo_open		= am79c961_open,
 	.ndo_stop		= am79c961_close,
 	.ndo_start_xmit		= am79c961_sendpacket,
-	.ndo_get_stats		= am79c961_getstats,
 	.ndo_set_multicast_list	= am79c961_setmulticastlist,
 	.ndo_tx_timeout		= am79c961_timeout,
 	.ndo_validate_addr	= eth_validate_addr,
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 6028226a727..9eb9b98a7ae 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -1229,8 +1229,10 @@ static int __devinit eth_init_one(struct platform_device *pdev)
 	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, "0", plat->phy);
 	port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
 				   PHY_INTERFACE_MODE_MII);
-	if ((err = IS_ERR(port->phydev)))
+	if (IS_ERR(port->phydev)) {
+		err = PTR_ERR(port->phydev);
 		goto err_free_mem;
+	}
 
 	port->phydev->irq = PHY_POLL;
 
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index 871b1633f54..f4744fc8976 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -270,9 +270,9 @@ static const struct net_device_ops at1700_netdev_ops = {
 
 static int __init at1700_probe1(struct net_device *dev, int ioaddr)
 {
-	char fmv_irqmap[4] = {3, 7, 10, 15};
-	char fmv_irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15};
-	char at1700_irqmap[8] = {3, 4, 5, 9, 10, 11, 14, 15};
+	static const char fmv_irqmap[4] = {3, 7, 10, 15};
+	static const char fmv_irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15};
+	static const char at1700_irqmap[8] = {3, 4, 5, 9, 10, 11, 14, 15};
 	unsigned int i, irq, is_fmv18x = 0, is_at1700 = 0;
 	int slot, ret = -ENODEV;
 	struct net_local *lp = netdev_priv(dev);
diff --git a/drivers/net/atl1c/atl1c_hw.c b/drivers/net/atl1c/atl1c_hw.c
index 919080b2c3a..1bf67200994 100644
--- a/drivers/net/atl1c/atl1c_hw.c
+++ b/drivers/net/atl1c/atl1c_hw.c
@@ -82,7 +82,7 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw)
 	addr[0] = addr[1] = 0;
 	AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
 	if (atl1c_check_eeprom_exist(hw)) {
-		if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b) {
+		if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) {
 			/* Enable OTP CLK */
 			if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) {
 				otp_ctrl_data |= OTP_CTRL_CLK_EN;
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 09b099bfab2..a699bbf20eb 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -702,6 +702,7 @@ static int __devinit atl1c_sw_init(struct atl1c_adapter *adapter)
 
 
 	adapter->wol = 0;
+	device_set_wakeup_enable(&pdev->dev, false);
 	adapter->link_speed = SPEED_0;
 	adapter->link_duplex = FULL_DUPLEX;
 	adapter->num_rx_queues = AT_DEF_RECEIVE_QUEUE;
@@ -2078,7 +2079,7 @@ static int atl1c_tso_csum(struct atl1c_adapter *adapter,
 check_sum:
 	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
 		u8 css, cso;
-		cso = skb_transport_offset(skb);
+		cso = skb_checksum_start_offset(skb);
 
 		if (unlikely(cso & 0x1)) {
 			if (netif_msg_tx_err(adapter))
@@ -2444,8 +2445,9 @@ static int atl1c_close(struct net_device *netdev)
 	return 0;
 }
 
-static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state)
+static int atl1c_suspend(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct atl1c_adapter *adapter = netdev_priv(netdev);
 	struct atl1c_hw *hw = &adapter->hw;
@@ -2454,7 +2456,6 @@ static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state)
 	u32 wol_ctrl_data = 0;
 	u16 mii_intr_status_data = 0;
 	u32 wufc = adapter->wol;
-	int retval = 0;
 
 	atl1c_disable_l0s_l1(hw);
 	if (netif_running(netdev)) {
@@ -2462,9 +2463,6 @@ static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state)
 		atl1c_down(adapter);
 	}
 	netif_device_detach(netdev);
-	retval = pci_save_state(pdev);
-	if (retval)
-		return retval;
 
 	if (wufc)
 		if (atl1c_phy_power_saving(hw) != 0)
@@ -2525,12 +2523,8 @@ static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state)
 		AT_WRITE_REG(hw, REG_WOL_CTRL, wol_ctrl_data);
 		AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
 
-		/* pcie patch */
-		device_set_wakeup_enable(&pdev->dev, 1);
-
 		AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_DEFAULT |
 			GPHY_CTRL_EXT_RESET);
-		pci_prepare_to_sleep(pdev);
 	} else {
 		AT_WRITE_REG(hw, REG_GPHY_CTRL, GPHY_CTRL_POWER_SAVING);
 		master_ctrl_data |= MASTER_CTRL_CLK_SEL_DIS;
@@ -2540,25 +2534,17 @@ static int atl1c_suspend(struct pci_dev *pdev, pm_message_t state)
 		AT_WRITE_REG(hw, REG_MAC_CTRL, mac_ctrl_data);
 		AT_WRITE_REG(hw, REG_WOL_CTRL, 0);
 		hw->phy_configured = false; /* re-init PHY when resume */
-		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
 	}
 
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
 	return 0;
 }
 
-static int atl1c_resume(struct pci_dev *pdev)
+static int atl1c_resume(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct atl1c_adapter *adapter = netdev_priv(netdev);
 
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	pci_enable_wake(pdev, PCI_D3hot, 0);
-	pci_enable_wake(pdev, PCI_D3cold, 0);
-
 	AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
 	atl1c_reset_pcie(&adapter->hw, ATL1C_PCIE_L0S_L1_DISABLE |
 			ATL1C_PCIE_PHY_RESET);
@@ -2582,7 +2568,12 @@ static int atl1c_resume(struct pci_dev *pdev)
 
 static void atl1c_shutdown(struct pci_dev *pdev)
 {
-	atl1c_suspend(pdev, PMSG_SUSPEND);
+	struct net_device *netdev = pci_get_drvdata(pdev);
+	struct atl1c_adapter *adapter = netdev_priv(netdev);
+
+	atl1c_suspend(&pdev->dev);
+	pci_wake_from_d3(pdev, adapter->wol);
+	pci_set_power_state(pdev, PCI_D3hot);
 }
 
 static const struct net_device_ops atl1c_netdev_ops = {
@@ -2886,16 +2877,16 @@ static struct pci_error_handlers atl1c_err_handler = {
 	.resume = atl1c_io_resume,
 };
 
+static SIMPLE_DEV_PM_OPS(atl1c_pm_ops, atl1c_suspend, atl1c_resume);
+
 static struct pci_driver atl1c_driver = {
 	.name     = atl1c_driver_name,
 	.id_table = atl1c_pci_tbl,
 	.probe    = atl1c_probe,
 	.remove   = __devexit_p(atl1c_remove),
-	/* Power Managment Hooks */
-	.suspend  = atl1c_suspend,
-	.resume   = atl1c_resume,
 	.shutdown = atl1c_shutdown,
-	.err_handler = &atl1c_err_handler
+	.err_handler = &atl1c_err_handler,
+	.driver.pm = &atl1c_pm_ops,
 };
 
 /*
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index ef6349bf3b3..e28f8baf394 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -1649,7 +1649,7 @@ check_sum:
 	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
 		u8 css, cso;
 
-		cso = skb_transport_offset(skb);
+		cso = skb_checksum_start_offset(skb);
 		if (unlikely(cso & 0x1)) {
 			netdev_err(adapter->netdev,
 				   "payload offset should not ant event number\n");
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 53363108994..3b527687c28 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2174,7 +2174,7 @@ static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb,
 	u8 css, cso;
 
 	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
-		css = (u8) (skb->csum_start - skb_headroom(skb));
+		css = skb_checksum_start_offset(skb);
 		cso = css + (u8) skb->csum_offset;
 		if (unlikely(css & 0x1)) {
 			/* L1 hardware requires an even number here */
@@ -3504,6 +3504,8 @@ static int atl1_set_ringparam(struct net_device *netdev,
 	struct atl1_rfd_ring rfd_old, rfd_new;
 	struct atl1_rrd_ring rrd_old, rrd_new;
 	struct atl1_ring_header rhdr_old, rhdr_new;
+	struct atl1_smb smb;
+	struct atl1_cmb cmb;
 	int err;
 
 	tpd_old = adapter->tpd_ring;
@@ -3544,11 +3546,19 @@ static int atl1_set_ringparam(struct net_device *netdev,
 		adapter->rrd_ring = rrd_old;
 		adapter->tpd_ring = tpd_old;
 		adapter->ring_header = rhdr_old;
+		/*
+		 * Save SMB and CMB, since atl1_free_ring_resources
+		 * will clear them.
+		 */
+		smb = adapter->smb;
+		cmb = adapter->cmb;
 		atl1_free_ring_resources(adapter);
 		adapter->rfd_ring = rfd_new;
 		adapter->rrd_ring = rrd_new;
 		adapter->tpd_ring = tpd_new;
 		adapter->ring_header = rhdr_new;
+		adapter->smb = smb;
+		adapter->cmb = cmb;
 
 		err = atl1_up(adapter);
 		if (err)
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index 35b14bec120..4e6f4e95a5a 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -1504,8 +1504,8 @@ static void __devexit atl2_remove(struct pci_dev *pdev)
 
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_config_timer);
-
-	flush_scheduled_work();
+	cancel_work_sync(&adapter->reset_task);
+	cancel_work_sync(&adapter->link_chg_task);
 
 	unregister_netdev(netdev);
 
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 43489f89c14..b9debcfb61a 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -106,8 +106,6 @@ MODULE_VERSION(DRV_VERSION);
  * complete immediately.
  */
 
-struct au1000_private *au_macs[NUM_ETH_INTERFACES];
-
 /*
  * board-specific configurations
  *
@@ -155,10 +153,10 @@ static void au1000_enable_mac(struct net_device *dev, int force_reset)
 	spin_lock_irqsave(&aup->lock, flags);
 
 	if (force_reset || (!aup->mac_enabled)) {
-		writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+		writel(MAC_EN_CLOCK_ENABLE, aup->enable);
 		au_sync_delay(2);
 		writel((MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2
-				| MAC_EN_CLOCK_ENABLE), &aup->enable);
+				| MAC_EN_CLOCK_ENABLE), aup->enable);
 		au_sync_delay(2);
 
 		aup->mac_enabled = 1;
@@ -503,9 +501,9 @@ static void au1000_reset_mac_unlocked(struct net_device *dev)
 
 	au1000_hard_stop(dev);
 
-	writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+	writel(MAC_EN_CLOCK_ENABLE, aup->enable);
 	au_sync_delay(2);
-	writel(0, &aup->enable);
+	writel(0, aup->enable);
 	au_sync_delay(2);
 
 	aup->tx_full = 0;
@@ -1119,7 +1117,7 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 	/* set a random MAC now in case platform_data doesn't provide one */
 	random_ether_addr(dev->dev_addr);
 
-	writel(0, &aup->enable);
+	writel(0, aup->enable);
 	aup->mac_enabled = 0;
 
 	pd = pdev->dev.platform_data;
diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index b6da4cf3694..4bebff3faea 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -325,7 +325,7 @@ static void ax_block_output(struct net_device *dev, int count,
 static void
 ax_mii_ei_outbits(struct net_device *dev, unsigned int bits, int len)
 {
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
 	unsigned int memr;
 
@@ -364,7 +364,7 @@ ax_mii_ei_outbits(struct net_device *dev, unsigned int bits, int len)
 static unsigned int
 ax_phy_ei_inbits(struct net_device *dev, int no)
 {
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	void __iomem *memr_addr = (void __iomem *)dev->base_addr + AX_MEMR;
 	unsigned int memr;
 	unsigned int result = 0;
@@ -412,7 +412,7 @@ ax_phy_issueaddr(struct net_device *dev, int phy_addr, int reg, int opc)
 static int
 ax_phy_read(struct net_device *dev, int phy_addr, int reg)
 {
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	unsigned long flags;
  	unsigned int result;
 
@@ -435,7 +435,7 @@ ax_phy_read(struct net_device *dev, int phy_addr, int reg)
 static void
 ax_phy_write(struct net_device *dev, int phy_addr, int reg, int value)
 {
-	struct ei_device *ei = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei = netdev_priv(dev);
 	struct ax_device  *ax = to_ax_dev(dev);
 	unsigned long flags;
 
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index c6e86315b3f..2e2b76258ab 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -381,11 +381,11 @@ static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
 	__b44_set_flow_ctrl(bp, pause_enab);
 }
 
-#ifdef SSB_DRIVER_MIPS
-extern char *nvram_get(char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
 static void b44_wap54g10_workaround(struct b44 *bp)
 {
-	const char *str;
+	char buf[20];
 	u32 val;
 	int err;
 
@@ -394,10 +394,9 @@ static void b44_wap54g10_workaround(struct b44 *bp)
 	 * see https://dev.openwrt.org/ticket/146
 	 * check and reset bit "isolate"
 	 */
-	str = nvram_get("boardnum");
-	if (!str)
+	if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
 		return;
-	if (simple_strtoul(str, NULL, 0) == 2) {
+	if (simple_strtoul(buf, NULL, 0) == 2) {
 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
 		if (err)
 			goto error;
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
index ecfef240a30..e94a966af41 100644
--- a/drivers/net/bcm63xx_enet.c
+++ b/drivers/net/bcm63xx_enet.c
@@ -1097,7 +1097,7 @@ static int bcm_enet_stop(struct net_device *dev)
 	enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
 
 	/* make sure no mib update is scheduled */
-	flush_scheduled_work();
+	cancel_work_sync(&priv->mib_update_task);
 
 	/* disable dma & mac */
 	bcm_enet_disable_dma(priv, priv->tx_chan);
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index 4594a28b1f6..add0b93350d 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -38,14 +38,17 @@
 #define BE_NAME			"ServerEngines BladeEngine2 10Gbps NIC"
 #define BE3_NAME		"ServerEngines BladeEngine3 10Gbps NIC"
 #define OC_NAME			"Emulex OneConnect 10Gbps NIC"
-#define OC_NAME1		"Emulex OneConnect 10Gbps NIC (be3)"
+#define OC_NAME_BE		OC_NAME	"(be3)"
+#define OC_NAME_LANCER		OC_NAME "(Lancer)"
 #define DRV_DESC		"ServerEngines BladeEngine 10Gbps NIC Driver"
 
 #define BE_VENDOR_ID 		0x19a2
+#define EMULEX_VENDOR_ID	0x10df
 #define BE_DEVICE_ID1		0x211
 #define BE_DEVICE_ID2		0x221
-#define OC_DEVICE_ID1		0x700
-#define OC_DEVICE_ID2		0x710
+#define OC_DEVICE_ID1		0x700	/* Device Id for BE2 cards */
+#define OC_DEVICE_ID2		0x710	/* Device Id for BE3 cards */
+#define OC_DEVICE_ID3		0xe220	/* Device id for Lancer cards */
 
 static inline char *nic_name(struct pci_dev *pdev)
 {
@@ -53,7 +56,9 @@ static inline char *nic_name(struct pci_dev *pdev)
 	case OC_DEVICE_ID1:
 		return OC_NAME;
 	case OC_DEVICE_ID2:
-		return OC_NAME1;
+		return OC_NAME_BE;
+	case OC_DEVICE_ID3:
+		return OC_NAME_LANCER;
 	case BE_DEVICE_ID2:
 		return BE3_NAME;
 	default:
@@ -149,6 +154,7 @@ struct be_eq_obj {
 	u16 min_eqd;		/* in usecs */
 	u16 max_eqd;		/* in usecs */
 	u16 cur_eqd;		/* in usecs */
+	u8  msix_vec_idx;
 
 	struct napi_struct napi;
 };
@@ -214,7 +220,9 @@ struct be_rx_obj {
 	struct be_rx_stats stats;
 	u8 rss_id;
 	bool rx_post_starved;	/* Zero rx frags have been posted to BE */
-	u32 cache_line_barrier[16];
+	u16 last_frag_index;
+	u16 rsvd;
+	u32 cache_line_barrier[15];
 };
 
 struct be_vf_cfg {
@@ -234,7 +242,7 @@ struct be_adapter {
 	u8 __iomem *db;		/* Door Bell */
 	u8 __iomem *pcicfg;	/* PCI config space */
 
-	spinlock_t mbox_lock;	/* For serializing mbox cmds to BE card */
+	struct mutex mbox_lock; /* For serializing mbox cmds to BE card */
 	struct be_dma_mem mbox_mem;
 	/* Mbox mem is adjusted to align to 16 bytes. The allocated addr
 	 * is stored for freeing purpose */
@@ -260,6 +268,8 @@ struct be_adapter {
 	u32 num_rx_qs;
 	u32 big_page_size;	/* Compounded page size shared by rx wrbs */
 
+	u8 msix_vec_next_idx;
+
 	struct vlan_group *vlan_grp;
 	u16 vlans_added;
 	u16 max_vlans;	/* Number of vlans supported */
@@ -299,8 +309,8 @@ struct be_adapter {
 
 	bool sriov_enabled;
 	struct be_vf_cfg vf_cfg[BE_MAX_VF];
-	u8 base_eq_id;
 	u8 is_virtfn;
+	u32 sli_family;
 };
 
 #define be_physfn(adapter) (!adapter->is_virtfn)
@@ -309,6 +319,8 @@ struct be_adapter {
 #define BE_GEN2 2
 #define BE_GEN3 3
 
+#define lancer_chip(adapter)		(adapter->pdev->device == OC_DEVICE_ID3)
+
 extern const struct ethtool_ops be_ethtool_ops;
 
 #define tx_stats(adapter)		(&adapter->tx_stats)
@@ -416,10 +428,17 @@ static inline u8 is_udp_pkt(struct sk_buff *skb)
 static inline void be_check_sriov_fn_type(struct be_adapter *adapter)
 {
 	u8 data;
-
-	pci_write_config_byte(adapter->pdev, 0xFE, 0xAA);
-	pci_read_config_byte(adapter->pdev, 0xFE, &data);
-	adapter->is_virtfn = (data != 0xAA);
+	u32 sli_intf;
+
+	if (lancer_chip(adapter)) {
+		pci_read_config_dword(adapter->pdev, SLI_INTF_REG_OFFSET,
+								&sli_intf);
+		adapter->is_virtfn = (sli_intf & SLI_INTF_FT_MASK) ? 1 : 0;
+	} else {
+		pci_write_config_byte(adapter->pdev, 0xFE, 0xAA);
+		pci_read_config_byte(adapter->pdev, 0xFE, &data);
+		adapter->is_virtfn = (data != 0xAA);
+	}
 }
 
 static inline void be_vf_eth_addr_generate(struct be_adapter *adapter, u8 *mac)
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 36eca1ce75d..0c7811faf72 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -323,7 +323,12 @@ static int be_mbox_notify_wait(struct be_adapter *adapter)
 
 static int be_POST_stage_get(struct be_adapter *adapter, u16 *stage)
 {
-	u32 sem = ioread32(adapter->csr + MPU_EP_SEMAPHORE_OFFSET);
+	u32 sem;
+
+	if (lancer_chip(adapter))
+		sem  = ioread32(adapter->db + MPU_EP_SEMAPHORE_IF_TYPE2_OFFSET);
+	else
+		sem  = ioread32(adapter->csr + MPU_EP_SEMAPHORE_OFFSET);
 
 	*stage = sem & EP_SEMAPHORE_POST_STAGE_MASK;
 	if ((sem >> EP_SEMAPHORE_POST_ERR_SHIFT) & EP_SEMAPHORE_POST_ERR_MASK)
@@ -462,7 +467,8 @@ int be_cmd_fw_init(struct be_adapter *adapter)
 	u8 *wrb;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = (u8 *)wrb_from_mbox(adapter);
 	*wrb++ = 0xFF;
@@ -476,7 +482,7 @@ int be_cmd_fw_init(struct be_adapter *adapter)
 
 	status = be_mbox_notify_wait(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 	return status;
 }
 
@@ -491,7 +497,8 @@ int be_cmd_fw_clean(struct be_adapter *adapter)
 	if (adapter->eeh_err)
 		return -EIO;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = (u8 *)wrb_from_mbox(adapter);
 	*wrb++ = 0xFF;
@@ -505,7 +512,7 @@ int be_cmd_fw_clean(struct be_adapter *adapter)
 
 	status = be_mbox_notify_wait(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 	return status;
 }
 int be_cmd_eq_create(struct be_adapter *adapter,
@@ -516,7 +523,8 @@ int be_cmd_eq_create(struct be_adapter *adapter,
 	struct be_dma_mem *q_mem = &eq->dma_mem;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -546,7 +554,7 @@ int be_cmd_eq_create(struct be_adapter *adapter,
 		eq->created = true;
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 	return status;
 }
 
@@ -558,7 +566,8 @@ int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
 	struct be_cmd_req_mac_query *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -583,7 +592,7 @@ int be_cmd_mac_addr_query(struct be_adapter *adapter, u8 *mac_addr,
 		memcpy(mac_addr, resp->mac.addr, ETH_ALEN);
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 	return status;
 }
 
@@ -667,7 +676,8 @@ int be_cmd_cq_create(struct be_adapter *adapter,
 	void *ctxt;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -680,16 +690,36 @@ int be_cmd_cq_create(struct be_adapter *adapter,
 		OPCODE_COMMON_CQ_CREATE, sizeof(*req));
 
 	req->num_pages =  cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+	if (lancer_chip(adapter)) {
+		req->hdr.version = 1;
+		req->page_size = 1; /* 1 for 4K */
+		AMAP_SET_BITS(struct amap_cq_context_lancer, coalescwm, ctxt,
+								coalesce_wm);
+		AMAP_SET_BITS(struct amap_cq_context_lancer, nodelay, ctxt,
+								no_delay);
+		AMAP_SET_BITS(struct amap_cq_context_lancer, count, ctxt,
+						__ilog2_u32(cq->len/256));
+		AMAP_SET_BITS(struct amap_cq_context_lancer, valid, ctxt, 1);
+		AMAP_SET_BITS(struct amap_cq_context_lancer, eventable,
+								ctxt, 1);
+		AMAP_SET_BITS(struct amap_cq_context_lancer, eqid,
+								ctxt, eq->id);
+		AMAP_SET_BITS(struct amap_cq_context_lancer, armed, ctxt, 1);
+	} else {
+		AMAP_SET_BITS(struct amap_cq_context_be, coalescwm, ctxt,
+								coalesce_wm);
+		AMAP_SET_BITS(struct amap_cq_context_be, nodelay,
+								ctxt, no_delay);
+		AMAP_SET_BITS(struct amap_cq_context_be, count, ctxt,
+						__ilog2_u32(cq->len/256));
+		AMAP_SET_BITS(struct amap_cq_context_be, valid, ctxt, 1);
+		AMAP_SET_BITS(struct amap_cq_context_be, solevent,
+								ctxt, sol_evts);
+		AMAP_SET_BITS(struct amap_cq_context_be, eventable, ctxt, 1);
+		AMAP_SET_BITS(struct amap_cq_context_be, eqid, ctxt, eq->id);
+		AMAP_SET_BITS(struct amap_cq_context_be, armed, ctxt, 1);
+	}
 
-	AMAP_SET_BITS(struct amap_cq_context, coalescwm, ctxt, coalesce_wm);
-	AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay);
-	AMAP_SET_BITS(struct amap_cq_context, count, ctxt,
-			__ilog2_u32(cq->len/256));
-	AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1);
-	AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
-	AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
-	AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
-	AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
 	be_dws_cpu_to_le(ctxt, sizeof(req->context));
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
@@ -701,7 +731,7 @@ int be_cmd_cq_create(struct be_adapter *adapter,
 		cq->created = true;
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 
 	return status;
 }
@@ -724,7 +754,8 @@ int be_cmd_mccq_create(struct be_adapter *adapter,
 	void *ctxt;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -737,13 +768,27 @@ int be_cmd_mccq_create(struct be_adapter *adapter,
 			OPCODE_COMMON_MCC_CREATE_EXT, sizeof(*req));
 
 	req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+	if (lancer_chip(adapter)) {
+		req->hdr.version = 1;
+		req->cq_id = cpu_to_le16(cq->id);
+
+		AMAP_SET_BITS(struct amap_mcc_context_lancer, ring_size, ctxt,
+						be_encoded_q_len(mccq->len));
+		AMAP_SET_BITS(struct amap_mcc_context_lancer, valid, ctxt, 1);
+		AMAP_SET_BITS(struct amap_mcc_context_lancer, async_cq_id,
+								ctxt, cq->id);
+		AMAP_SET_BITS(struct amap_mcc_context_lancer, async_cq_valid,
+								 ctxt, 1);
+
+	} else {
+		AMAP_SET_BITS(struct amap_mcc_context_be, valid, ctxt, 1);
+		AMAP_SET_BITS(struct amap_mcc_context_be, ring_size, ctxt,
+						be_encoded_q_len(mccq->len));
+		AMAP_SET_BITS(struct amap_mcc_context_be, cq_id, ctxt, cq->id);
+	}
 
-	AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1);
-	AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt,
-		be_encoded_q_len(mccq->len));
-	AMAP_SET_BITS(struct amap_mcc_context, cq_id, ctxt, cq->id);
 	/* Subscribe to Link State and Group 5 Events(bits 1 and 5 set) */
-	req->async_event_bitmap[0] |= 0x00000022;
+	req->async_event_bitmap[0] = cpu_to_le32(0x00000022);
 	be_dws_cpu_to_le(ctxt, sizeof(req->context));
 
 	be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
@@ -754,7 +799,7 @@ int be_cmd_mccq_create(struct be_adapter *adapter,
 		mccq->id = le16_to_cpu(resp->id);
 		mccq->created = true;
 	}
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 
 	return status;
 }
@@ -769,7 +814,8 @@ int be_cmd_txq_create(struct be_adapter *adapter,
 	void *ctxt;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -801,7 +847,7 @@ int be_cmd_txq_create(struct be_adapter *adapter,
 		txq->created = true;
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 
 	return status;
 }
@@ -816,7 +862,8 @@ int be_cmd_rxq_create(struct be_adapter *adapter,
 	struct be_dma_mem *q_mem = &rxq->dma_mem;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -843,7 +890,7 @@ int be_cmd_rxq_create(struct be_adapter *adapter,
 		*rss_id = resp->rss_id;
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 
 	return status;
 }
@@ -862,7 +909,8 @@ int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
 	if (adapter->eeh_err)
 		return -EIO;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -899,7 +947,7 @@ int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
 
 	status = be_mbox_notify_wait(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 
 	return status;
 }
@@ -915,7 +963,8 @@ int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, u32 en_flags,
 	struct be_cmd_req_if_create *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -941,7 +990,7 @@ int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, u32 en_flags,
 			*pmac_id = le32_to_cpu(resp->pmac_id);
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 	return status;
 }
 
@@ -955,7 +1004,8 @@ int be_cmd_if_destroy(struct be_adapter *adapter, u32 interface_id)
 	if (adapter->eeh_err)
 		return -EIO;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -970,7 +1020,7 @@ int be_cmd_if_destroy(struct be_adapter *adapter, u32 interface_id)
 
 	status = be_mbox_notify_wait(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 
 	return status;
 }
@@ -1060,7 +1110,8 @@ int be_cmd_get_fw_ver(struct be_adapter *adapter, char *fw_ver)
 	struct be_cmd_req_get_fw_version *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -1077,7 +1128,7 @@ int be_cmd_get_fw_ver(struct be_adapter *adapter, char *fw_ver)
 		strncpy(fw_ver, resp->firmware_version_string, FW_VER_LEN);
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 	return status;
 }
 
@@ -1235,7 +1286,7 @@ int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
 
 		i = 0;
 		netdev_for_each_mc_addr(ha, netdev)
-			memcpy(req->mac[i].byte, ha->addr, ETH_ALEN);
+			memcpy(req->mac[i++].byte, ha->addr, ETH_ALEN);
 	} else {
 		req->promiscuous = 1;
 	}
@@ -1322,7 +1373,8 @@ int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num,
 	struct be_cmd_req_query_fw_cfg *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -1341,7 +1393,7 @@ int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num,
 		*caps = le32_to_cpu(resp->function_caps);
 	}
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 	return status;
 }
 
@@ -1352,7 +1404,8 @@ int be_cmd_reset_function(struct be_adapter *adapter)
 	struct be_cmd_req_hdr *req;
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -1365,7 +1418,7 @@ int be_cmd_reset_function(struct be_adapter *adapter)
 
 	status = be_mbox_notify_wait(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 	return status;
 }
 
@@ -1376,7 +1429,8 @@ int be_cmd_rss_config(struct be_adapter *adapter, u8 *rsstable, u16 table_size)
 	u32 myhash[10];
 	int status;
 
-	spin_lock(&adapter->mbox_lock);
+	if (mutex_lock_interruptible(&adapter->mbox_lock))
+		return -1;
 
 	wrb = wrb_from_mbox(adapter);
 	req = embedded_payload(wrb);
@@ -1396,7 +1450,7 @@ int be_cmd_rss_config(struct be_adapter *adapter, u8 *rsstable, u16 table_size)
 
 	status = be_mbox_notify_wait(adapter);
 
-	spin_unlock(&adapter->mbox_lock);
+	mutex_unlock(&adapter->mbox_lock);
 	return status;
 }
 
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index 8469ff061f3..83d15c8a9fa 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -309,7 +309,7 @@ struct be_cmd_req_pmac_del {
 /******************** Create CQ ***************************/
 /* Pseudo amap definition in which each bit of the actual structure is defined
  * as a byte: used to calculate offset/shift/mask of each field */
-struct amap_cq_context {
+struct amap_cq_context_be {
 	u8 cidx[11];		/* dword 0*/
 	u8 rsvd0;		/* dword 0*/
 	u8 coalescwm[2];	/* dword 0*/
@@ -332,14 +332,32 @@ struct amap_cq_context {
 	u8 rsvd5[32];		/* dword 3*/
 } __packed;
 
+struct amap_cq_context_lancer {
+	u8 rsvd0[12];		/* dword 0*/
+	u8 coalescwm[2];	/* dword 0*/
+	u8 nodelay;		/* dword 0*/
+	u8 rsvd1[12];		/* dword 0*/
+	u8 count[2];		/* dword 0*/
+	u8 valid;		/* dword 0*/
+	u8 rsvd2;		/* dword 0*/
+	u8 eventable;		/* dword 0*/
+	u8 eqid[16];		/* dword 1*/
+	u8 rsvd3[15];		/* dword 1*/
+	u8 armed;		/* dword 1*/
+	u8 rsvd4[32];		/* dword 2*/
+	u8 rsvd5[32];		/* dword 3*/
+} __packed;
+
 struct be_cmd_req_cq_create {
 	struct be_cmd_req_hdr hdr;
 	u16 num_pages;
-	u16 rsvd0;
-	u8 context[sizeof(struct amap_cq_context) / 8];
+	u8 page_size;
+	u8 rsvd0;
+	u8 context[sizeof(struct amap_cq_context_be) / 8];
 	struct phys_addr pages[8];
 } __packed;
 
+
 struct be_cmd_resp_cq_create {
 	struct be_cmd_resp_hdr hdr;
 	u16 cq_id;
@@ -349,7 +367,7 @@ struct be_cmd_resp_cq_create {
 /******************** Create MCCQ ***************************/
 /* Pseudo amap definition in which each bit of the actual structure is defined
  * as a byte: used to calculate offset/shift/mask of each field */
-struct amap_mcc_context {
+struct amap_mcc_context_be {
 	u8 con_index[14];
 	u8 rsvd0[2];
 	u8 ring_size[4];
@@ -364,12 +382,23 @@ struct amap_mcc_context {
 	u8 rsvd2[32];
 } __packed;
 
+struct amap_mcc_context_lancer {
+	u8 async_cq_id[16];
+	u8 ring_size[4];
+	u8 rsvd0[12];
+	u8 rsvd1[31];
+	u8 valid;
+	u8 async_cq_valid[1];
+	u8 rsvd2[31];
+	u8 rsvd3[32];
+} __packed;
+
 struct be_cmd_req_mcc_create {
 	struct be_cmd_req_hdr hdr;
 	u16 num_pages;
-	u16 rsvd0;
+	u16 cq_id;
 	u32 async_event_bitmap[1];
-	u8 context[sizeof(struct amap_mcc_context) / 8];
+	u8 context[sizeof(struct amap_mcc_context_be) / 8];
 	struct phys_addr pages[8];
 } __packed;
 
@@ -605,6 +634,7 @@ struct be_hw_stats {
 	struct be_rxf_stats rxf;
 	u32 rsvd[48];
 	struct be_erx_stats erx;
+	u32 rsvd1[6];
 };
 
 struct be_cmd_req_get_stats {
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index 0f46366ecc4..b4be0271efe 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -549,7 +549,9 @@ be_test_ddr_dma(struct be_adapter *adapter)
 {
 	int ret, i;
 	struct be_dma_mem ddrdma_cmd;
-	u64 pattern[2] = {0x5a5a5a5a5a5a5a5aULL, 0xa5a5a5a5a5a5a5a5ULL};
+	static const u64 pattern[2] = {
+		0x5a5a5a5a5a5a5a5aULL, 0xa5a5a5a5a5a5a5a5ULL
+	};
 
 	ddrdma_cmd.size = sizeof(struct be_cmd_req_ddrdma_test);
 	ddrdma_cmd.va = pci_alloc_consistent(adapter->pdev, ddrdma_cmd.size,
diff --git a/drivers/net/benet/be_hw.h b/drivers/net/benet/be_hw.h
index a2ec5df0d73..4096d977823 100644
--- a/drivers/net/benet/be_hw.h
+++ b/drivers/net/benet/be_hw.h
@@ -32,10 +32,12 @@
 #define MPU_EP_CONTROL 		0
 
 /********** MPU semphore ******************/
-#define MPU_EP_SEMAPHORE_OFFSET 	0xac
-#define EP_SEMAPHORE_POST_STAGE_MASK	0x0000FFFF
-#define EP_SEMAPHORE_POST_ERR_MASK	0x1
-#define EP_SEMAPHORE_POST_ERR_SHIFT	31
+#define MPU_EP_SEMAPHORE_OFFSET		0xac
+#define MPU_EP_SEMAPHORE_IF_TYPE2_OFFSET	0x400
+#define EP_SEMAPHORE_POST_STAGE_MASK		0x0000FFFF
+#define EP_SEMAPHORE_POST_ERR_MASK		0x1
+#define EP_SEMAPHORE_POST_ERR_SHIFT		31
+
 /* MPU semphore POST stage values */
 #define POST_STAGE_AWAITING_HOST_RDY 	0x1 /* FW awaiting goahead from host */
 #define POST_STAGE_HOST_RDY 		0x2 /* Host has given go-ahed to FW */
@@ -66,6 +68,28 @@
 #define PCICFG_UE_STATUS_LOW_MASK		0xA8
 #define PCICFG_UE_STATUS_HI_MASK		0xAC
 
+/******** SLI_INTF ***********************/
+#define SLI_INTF_REG_OFFSET			0x58
+#define SLI_INTF_VALID_MASK			0xE0000000
+#define SLI_INTF_VALID				0xC0000000
+#define SLI_INTF_HINT2_MASK			0x1F000000
+#define SLI_INTF_HINT2_SHIFT			24
+#define SLI_INTF_HINT1_MASK			0x00FF0000
+#define SLI_INTF_HINT1_SHIFT			16
+#define SLI_INTF_FAMILY_MASK			0x00000F00
+#define SLI_INTF_FAMILY_SHIFT			8
+#define SLI_INTF_IF_TYPE_MASK			0x0000F000
+#define SLI_INTF_IF_TYPE_SHIFT			12
+#define SLI_INTF_REV_MASK			0x000000F0
+#define SLI_INTF_REV_SHIFT			4
+#define SLI_INTF_FT_MASK			0x00000001
+
+
+/* SLI family */
+#define BE_SLI_FAMILY		0x0
+#define LANCER_A0_SLI_FAMILY	0xA
+
+
 /********* ISR0 Register offset **********/
 #define CEV_ISR0_OFFSET 			0xC18
 #define CEV_ISR_SIZE				4
@@ -73,6 +97,9 @@
 /********* Event Q door bell *************/
 #define DB_EQ_OFFSET			DB_CQ_OFFSET
 #define DB_EQ_RING_ID_MASK		0x1FF	/* bits 0 - 8 */
+#define DB_EQ_RING_ID_EXT_MASK		0x3e00  /* bits 9-13 */
+#define DB_EQ_RING_ID_EXT_MASK_SHIFT	(2) /* qid bits 9-13 placing at 11-15 */
+
 /* Clear the interrupt for this eq */
 #define DB_EQ_CLR_SHIFT			(9)	/* bit 9 */
 /* Must be 1 */
@@ -85,6 +112,10 @@
 /********* Compl Q door bell *************/
 #define DB_CQ_OFFSET 			0x120
 #define DB_CQ_RING_ID_MASK		0x3FF	/* bits 0 - 9 */
+#define DB_CQ_RING_ID_EXT_MASK		0x7C00	/* bits 10-14 */
+#define DB_CQ_RING_ID_EXT_MASK_SHIFT	(1)	/* qid bits 10-14
+						 placing at 11-15 */
+
 /* Number of event entries processed */
 #define DB_CQ_NUM_POPPED_SHIFT		(16) 	/* bits 16 - 28 */
 /* Rearm bit */
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index c36cd2ffbad..de40d3b7152 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -41,6 +41,7 @@ static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
 	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
+	{ PCI_DEVICE(EMULEX_VENDOR_ID, OC_DEVICE_ID3)},
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
@@ -188,6 +189,8 @@ static void be_eq_notify(struct be_adapter *adapter, u16 qid,
 {
 	u32 val = 0;
 	val |= qid & DB_EQ_RING_ID_MASK;
+	val |= ((qid & DB_EQ_RING_ID_EXT_MASK) <<
+			DB_EQ_RING_ID_EXT_MASK_SHIFT);
 
 	if (adapter->eeh_err)
 		return;
@@ -205,6 +208,8 @@ void be_cq_notify(struct be_adapter *adapter, u16 qid, bool arm, u16 num_popped)
 {
 	u32 val = 0;
 	val |= qid & DB_CQ_RING_ID_MASK;
+	val |= ((qid & DB_CQ_RING_ID_EXT_MASK) <<
+			DB_CQ_RING_ID_EXT_MASK_SHIFT);
 
 	if (adapter->eeh_err)
 		return;
@@ -404,7 +409,8 @@ static void be_tx_stats_update(struct be_adapter *adapter,
 }
 
 /* Determine number of WRB entries needed to xmit data in an skb */
-static u32 wrb_cnt_for_skb(struct sk_buff *skb, bool *dummy)
+static u32 wrb_cnt_for_skb(struct be_adapter *adapter, struct sk_buff *skb,
+								bool *dummy)
 {
 	int cnt = (skb->len > skb->data_len);
 
@@ -412,12 +418,13 @@ static u32 wrb_cnt_for_skb(struct sk_buff *skb, bool *dummy)
 
 	/* to account for hdr wrb */
 	cnt++;
-	if (cnt & 1) {
+	if (lancer_chip(adapter) || !(cnt & 1)) {
+		*dummy = false;
+	} else {
 		/* add a dummy to make it an even num */
 		cnt++;
 		*dummy = true;
-	} else
-		*dummy = false;
+	}
 	BUG_ON(cnt > BE_MAX_TX_FRAG_COUNT);
 	return cnt;
 }
@@ -443,8 +450,18 @@ static void wrb_fill_hdr(struct be_adapter *adapter, struct be_eth_hdr_wrb *hdr,
 		AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso, hdr, 1);
 		AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso_mss,
 			hdr, skb_shinfo(skb)->gso_size);
-		if (skb_is_gso_v6(skb))
+		if (skb_is_gso_v6(skb) && !lancer_chip(adapter))
 			AMAP_SET_BITS(struct amap_eth_hdr_wrb, lso6, hdr, 1);
+		if (lancer_chip(adapter) && adapter->sli_family  ==
+							LANCER_A0_SLI_FAMILY) {
+			AMAP_SET_BITS(struct amap_eth_hdr_wrb, ipcs, hdr, 1);
+			if (is_tcp_pkt(skb))
+				AMAP_SET_BITS(struct amap_eth_hdr_wrb,
+								tcpcs, hdr, 1);
+			else if (is_udp_pkt(skb))
+				AMAP_SET_BITS(struct amap_eth_hdr_wrb,
+								udpcs, hdr, 1);
+		}
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		if (is_tcp_pkt(skb))
 			AMAP_SET_BITS(struct amap_eth_hdr_wrb, tcpcs, hdr, 1);
@@ -566,7 +583,7 @@ static netdev_tx_t be_xmit(struct sk_buff *skb,
 	u32 start = txq->head;
 	bool dummy_wrb, stopped = false;
 
-	wrb_cnt = wrb_cnt_for_skb(skb, &dummy_wrb);
+	wrb_cnt = wrb_cnt_for_skb(adapter, skb, &dummy_wrb);
 
 	copied = make_tx_wrbs(adapter, skb, wrb_cnt, dummy_wrb);
 	if (copied) {
@@ -894,11 +911,17 @@ static void be_rx_compl_discard(struct be_adapter *adapter,
 	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
 	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
 
-	for (i = 0; i < num_rcvd; i++) {
-		page_info = get_rx_page_info(adapter, rxo, rxq_idx);
-		put_page(page_info->page);
-		memset(page_info, 0, sizeof(*page_info));
-		index_inc(&rxq_idx, rxq->len);
+	 /* Skip out-of-buffer compl(lancer) or flush compl(BE) */
+	if (likely(rxq_idx != rxo->last_frag_index && num_rcvd != 0)) {
+
+		rxo->last_frag_index = rxq_idx;
+
+		for (i = 0; i < num_rcvd; i++) {
+			page_info = get_rx_page_info(adapter, rxo, rxq_idx);
+			put_page(page_info->page);
+			memset(page_info, 0, sizeof(*page_info));
+			index_inc(&rxq_idx, rxq->len);
+		}
 	}
 }
 
@@ -999,9 +1022,6 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 	u8 vtm;
 
 	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
-	/* Is it a flush compl that has no data */
-	if (unlikely(num_rcvd == 0))
-		return;
 
 	skb = netdev_alloc_skb_ip_align(adapter->netdev, BE_HDR_LEN);
 	if (unlikely(!skb)) {
@@ -1035,7 +1055,8 @@ static void be_rx_compl_process(struct be_adapter *adapter,
 			return;
 		}
 		vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
-		vid = swab16(vid);
+		if (!lancer_chip(adapter))
+			vid = swab16(vid);
 		vlan_hwaccel_receive_skb(skb, adapter->vlan_grp, vid);
 	} else {
 		netif_receive_skb(skb);
@@ -1057,10 +1078,6 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter,
 	u8 pkt_type;
 
 	num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
-	/* Is it a flush compl that has no data */
-	if (unlikely(num_rcvd == 0))
-		return;
-
 	pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
 	vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
 	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
@@ -1113,7 +1130,8 @@ static void be_rx_compl_process_gro(struct be_adapter *adapter,
 		napi_gro_frags(&eq_obj->napi);
 	} else {
 		vid = AMAP_GET_BITS(struct amap_eth_rx_compl, vlan_tag, rxcp);
-		vid = swab16(vid);
+		if (!lancer_chip(adapter))
+			vid = swab16(vid);
 
 		if (!adapter->vlan_grp || adapter->vlans_added == 0)
 			return;
@@ -1330,7 +1348,7 @@ static void be_rx_q_clean(struct be_adapter *adapter, struct be_rx_obj *rxo)
 	while ((rxcp = be_rx_compl_get(rxo)) != NULL) {
 		be_rx_compl_discard(adapter, rxo, rxcp);
 		be_rx_compl_reset(rxcp);
-		be_cq_notify(adapter, rx_cq->id, true, 1);
+		be_cq_notify(adapter, rx_cq->id, false, 1);
 	}
 
 	/* Then free posted rx buffer that were not used */
@@ -1381,7 +1399,8 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 		sent_skb = sent_skbs[txq->tail];
 		end_idx = txq->tail;
 		index_adv(&end_idx,
-			wrb_cnt_for_skb(sent_skb, &dummy_wrb) - 1, txq->len);
+			wrb_cnt_for_skb(adapter, sent_skb, &dummy_wrb) - 1,
+			txq->len);
 		be_tx_compl_process(adapter, end_idx);
 	}
 }
@@ -1476,7 +1495,9 @@ static int be_tx_queues_create(struct be_adapter *adapter)
 	/* Ask BE to create Tx Event queue */
 	if (be_cmd_eq_create(adapter, eq, adapter->tx_eq.cur_eqd))
 		goto tx_eq_free;
-	adapter->base_eq_id = adapter->tx_eq.q.id;
+
+	adapter->tx_eq.msix_vec_idx = adapter->msix_vec_next_idx++;
+
 
 	/* Alloc TX eth compl queue */
 	cq = &adapter->tx_obj.cq;
@@ -1554,6 +1575,9 @@ static int be_rx_queues_create(struct be_adapter *adapter)
 	adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
 	for_all_rx_queues(adapter, rxo, i) {
 		rxo->adapter = adapter;
+		/* Init last_frag_index so that the frag index in the first
+		 * completion will never match */
+		rxo->last_frag_index = 0xffff;
 		rxo->rx_eq.max_eqd = BE_MAX_EQD;
 		rxo->rx_eq.enable_aic = true;
 
@@ -1568,6 +1592,8 @@ static int be_rx_queues_create(struct be_adapter *adapter)
 		if (rc)
 			goto err;
 
+		rxo->rx_eq.msix_vec_idx = adapter->msix_vec_next_idx++;
+
 		/* CQ */
 		cq = &rxo->cq;
 		rc = be_queue_alloc(adapter, cq, RX_CQ_LEN,
@@ -1578,7 +1604,6 @@ static int be_rx_queues_create(struct be_adapter *adapter)
 		rc = be_cmd_cq_create(adapter, cq, eq, false, false, 3);
 		if (rc)
 			goto err;
-
 		/* Rx Q */
 		q = &rxo->q;
 		rc = be_queue_alloc(adapter, q, RX_Q_LEN,
@@ -1611,29 +1636,45 @@ err:
 	return -1;
 }
 
-/* There are 8 evt ids per func. Retruns the evt id's bit number */
-static inline int be_evt_bit_get(struct be_adapter *adapter, u32 eq_id)
+static bool event_peek(struct be_eq_obj *eq_obj)
 {
-	return eq_id - adapter->base_eq_id;
+	struct be_eq_entry *eqe = queue_tail_node(&eq_obj->q);
+	if (!eqe->evt)
+		return false;
+	else
+		return true;
 }
 
 static irqreturn_t be_intx(int irq, void *dev)
 {
 	struct be_adapter *adapter = dev;
 	struct be_rx_obj *rxo;
-	int isr, i;
+	int isr, i, tx = 0 , rx = 0;
 
-	isr = ioread32(adapter->csr + CEV_ISR0_OFFSET +
-		(adapter->tx_eq.q.id/ 8) * CEV_ISR_SIZE);
-	if (!isr)
-		return IRQ_NONE;
+	if (lancer_chip(adapter)) {
+		if (event_peek(&adapter->tx_eq))
+			tx = event_handle(adapter, &adapter->tx_eq);
+		for_all_rx_queues(adapter, rxo, i) {
+			if (event_peek(&rxo->rx_eq))
+				rx |= event_handle(adapter, &rxo->rx_eq);
+		}
 
-	if ((1 << be_evt_bit_get(adapter, adapter->tx_eq.q.id) & isr))
-		event_handle(adapter, &adapter->tx_eq);
+		if (!(tx || rx))
+			return IRQ_NONE;
 
-	for_all_rx_queues(adapter, rxo, i) {
-		if ((1 << be_evt_bit_get(adapter, rxo->rx_eq.q.id) & isr))
-			event_handle(adapter, &rxo->rx_eq);
+	} else {
+		isr = ioread32(adapter->csr + CEV_ISR0_OFFSET +
+			(adapter->tx_eq.q.id / 8) * CEV_ISR_SIZE);
+		if (!isr)
+			return IRQ_NONE;
+
+		if ((1 << adapter->tx_eq.msix_vec_idx & isr))
+			event_handle(adapter, &adapter->tx_eq);
+
+		for_all_rx_queues(adapter, rxo, i) {
+			if ((1 << rxo->rx_eq.msix_vec_idx & isr))
+				event_handle(adapter, &rxo->rx_eq);
+		}
 	}
 
 	return IRQ_HANDLED;
@@ -1658,10 +1699,9 @@ static irqreturn_t be_msix_tx_mcc(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
-static inline bool do_gro(struct be_adapter *adapter, struct be_rx_obj *rxo,
-			struct be_eth_rx_compl *rxcp)
+static inline bool do_gro(struct be_rx_obj *rxo,
+			struct be_eth_rx_compl *rxcp, u8 err)
 {
-	int err = AMAP_GET_BITS(struct amap_eth_rx_compl, err, rxcp);
 	int tcp_frame = AMAP_GET_BITS(struct amap_eth_rx_compl, tcpf, rxcp);
 
 	if (err)
@@ -1678,6 +1718,8 @@ static int be_poll_rx(struct napi_struct *napi, int budget)
 	struct be_queue_info *rx_cq = &rxo->cq;
 	struct be_eth_rx_compl *rxcp;
 	u32 work_done;
+	u16 frag_index, num_rcvd;
+	u8 err;
 
 	rxo->stats.rx_polls++;
 	for (work_done = 0; work_done < budget; work_done++) {
@@ -1685,10 +1727,22 @@ static int be_poll_rx(struct napi_struct *napi, int budget)
 		if (!rxcp)
 			break;
 
-		if (do_gro(adapter, rxo, rxcp))
-			be_rx_compl_process_gro(adapter, rxo, rxcp);
-		else
-			be_rx_compl_process(adapter, rxo, rxcp);
+		err = AMAP_GET_BITS(struct amap_eth_rx_compl, err, rxcp);
+		frag_index = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx,
+								rxcp);
+		num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags,
+								rxcp);
+
+		/* Skip out-of-buffer compl(lancer) or flush compl(BE) */
+		if (likely(frag_index != rxo->last_frag_index &&
+				num_rcvd != 0)) {
+			rxo->last_frag_index = frag_index;
+
+			if (do_gro(rxo, rxcp, err))
+				be_rx_compl_process_gro(adapter, rxo, rxcp);
+			else
+				be_rx_compl_process(adapter, rxo, rxcp);
+		}
 
 		be_rx_compl_reset(rxcp);
 	}
@@ -1830,8 +1884,7 @@ static void be_worker(struct work_struct *work)
 			be_post_rx_frags(rxo);
 		}
 	}
-
-	if (!adapter->ue_detected)
+	if (!adapter->ue_detected && !lancer_chip(adapter))
 		be_detect_dump_ue(adapter);
 
 reschedule:
@@ -1910,10 +1963,10 @@ static void be_sriov_disable(struct be_adapter *adapter)
 #endif
 }
 
-static inline int be_msix_vec_get(struct be_adapter *adapter, u32 eq_id)
+static inline int be_msix_vec_get(struct be_adapter *adapter,
+					struct be_eq_obj *eq_obj)
 {
-	return adapter->msix_entries[
-			be_evt_bit_get(adapter, eq_id)].vector;
+	return adapter->msix_entries[eq_obj->msix_vec_idx].vector;
 }
 
 static int be_request_irq(struct be_adapter *adapter,
@@ -1924,14 +1977,14 @@ static int be_request_irq(struct be_adapter *adapter,
 	int vec;
 
 	sprintf(eq_obj->desc, "%s-%s", netdev->name, desc);
-	vec = be_msix_vec_get(adapter, eq_obj->q.id);
+	vec = be_msix_vec_get(adapter, eq_obj);
 	return request_irq(vec, handler, 0, eq_obj->desc, context);
 }
 
 static void be_free_irq(struct be_adapter *adapter, struct be_eq_obj *eq_obj,
 			void *context)
 {
-	int vec = be_msix_vec_get(adapter, eq_obj->q.id);
+	int vec = be_msix_vec_get(adapter, eq_obj);
 	free_irq(vec, context);
 }
 
@@ -2036,14 +2089,15 @@ static int be_close(struct net_device *netdev)
 	netif_carrier_off(netdev);
 	adapter->link_up = false;
 
-	be_intr_set(adapter, false);
+	if (!lancer_chip(adapter))
+		be_intr_set(adapter, false);
 
 	if (adapter->msix_enabled) {
-		vec = be_msix_vec_get(adapter, tx_eq->q.id);
+		vec = be_msix_vec_get(adapter, tx_eq);
 		synchronize_irq(vec);
 
 		for_all_rx_queues(adapter, rxo, i) {
-			vec = be_msix_vec_get(adapter, rxo->rx_eq.q.id);
+			vec = be_msix_vec_get(adapter, &rxo->rx_eq);
 			synchronize_irq(vec);
 		}
 	} else {
@@ -2082,7 +2136,8 @@ static int be_open(struct net_device *netdev)
 
 	be_irq_register(adapter);
 
-	be_intr_set(adapter, true);
+	if (!lancer_chip(adapter))
+		be_intr_set(adapter, true);
 
 	/* The evt queues are created in unarmed state; arm them */
 	for_all_rx_queues(adapter, rxo, i) {
@@ -2343,10 +2398,10 @@ static int be_flash_data(struct be_adapter *adapter,
 	int num_bytes;
 	const u8 *p = fw->data;
 	struct be_cmd_write_flashrom *req = flash_cmd->va;
-	struct flash_comp *pflashcomp;
+	const struct flash_comp *pflashcomp;
 	int num_comp;
 
-	struct flash_comp gen3_flash_types[9] = {
+	static const struct flash_comp gen3_flash_types[9] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g3, IMG_TYPE_ISCSI_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g3},
 		{ FLASH_REDBOOT_START_g3, IMG_TYPE_REDBOOT,
@@ -2366,7 +2421,7 @@ static int be_flash_data(struct be_adapter *adapter,
 		{ FLASH_NCSI_START_g3, IMG_TYPE_NCSI_FW,
 			FLASH_NCSI_IMAGE_MAX_SIZE_g3}
 	};
-	struct flash_comp gen2_flash_types[8] = {
+	static const struct flash_comp gen2_flash_types[8] = {
 		{ FLASH_iSCSI_PRIMARY_IMAGE_START_g2, IMG_TYPE_ISCSI_ACTIVE,
 			FLASH_IMAGE_MAX_SIZE_g2},
 		{ FLASH_REDBOOT_START_g2, IMG_TYPE_REDBOOT,
@@ -2388,11 +2443,11 @@ static int be_flash_data(struct be_adapter *adapter,
 	if (adapter->generation == BE_GEN3) {
 		pflashcomp = gen3_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g3);
-		num_comp = 9;
+		num_comp = ARRAY_SIZE(gen3_flash_types);
 	} else {
 		pflashcomp = gen2_flash_types;
 		filehdr_size = sizeof(struct flash_file_hdr_g2);
-		num_comp = 8;
+		num_comp = ARRAY_SIZE(gen2_flash_types);
 	}
 	for (i = 0; i < num_comp; i++) {
 		if ((pflashcomp[i].optype == IMG_TYPE_NCSI_FW) &&
@@ -2458,6 +2513,12 @@ int be_load_fw(struct be_adapter *adapter, u8 *func)
 	int status, i = 0, num_imgs = 0;
 	const u8 *p;
 
+	if (!netif_running(adapter->netdev)) {
+		dev_err(&adapter->pdev->dev,
+			"Firmware load not allowed (interface is down)\n");
+		return -EPERM;
+	}
+
 	strcpy(fw_file, func);
 
 	status = request_firmware(&fw, fw_file, &adapter->pdev->dev);
@@ -2537,10 +2598,15 @@ static void be_netdev_init(struct net_device *netdev)
 	int i;
 
 	netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
-		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_HW_CSUM |
+		NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
 		NETIF_F_GRO | NETIF_F_TSO6;
 
-	netdev->vlan_features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_HW_CSUM;
+	netdev->vlan_features |= NETIF_F_SG | NETIF_F_TSO |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+
+	if (lancer_chip(adapter))
+		netdev->vlan_features |= NETIF_F_TSO6;
 
 	netdev->flags |= IFF_MULTICAST;
 
@@ -2581,6 +2647,15 @@ static int be_map_pci_bars(struct be_adapter *adapter)
 	u8 __iomem *addr;
 	int pcicfg_reg, db_reg;
 
+	if (lancer_chip(adapter)) {
+		addr = ioremap_nocache(pci_resource_start(adapter->pdev, 0),
+			pci_resource_len(adapter->pdev, 0));
+		if (addr == NULL)
+			return -ENOMEM;
+		adapter->db = addr;
+		return 0;
+	}
+
 	if (be_physfn(adapter)) {
 		addr = ioremap_nocache(pci_resource_start(adapter->pdev, 2),
 				pci_resource_len(adapter->pdev, 2));
@@ -2671,7 +2746,7 @@ static int be_ctrl_init(struct be_adapter *adapter)
 	}
 	memset(mc_cmd_mem->va, 0, mc_cmd_mem->size);
 
-	spin_lock_init(&adapter->mbox_lock);
+	mutex_init(&adapter->mbox_lock);
 	spin_lock_init(&adapter->mcc_lock);
 	spin_lock_init(&adapter->mcc_cq_lock);
 
@@ -2777,6 +2852,44 @@ static int be_get_config(struct be_adapter *adapter)
 	return 0;
 }
 
+static int be_dev_family_check(struct be_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	u32 sli_intf = 0, if_type;
+
+	switch (pdev->device) {
+	case BE_DEVICE_ID1:
+	case OC_DEVICE_ID1:
+		adapter->generation = BE_GEN2;
+		break;
+	case BE_DEVICE_ID2:
+	case OC_DEVICE_ID2:
+		adapter->generation = BE_GEN3;
+		break;
+	case OC_DEVICE_ID3:
+		pci_read_config_dword(pdev, SLI_INTF_REG_OFFSET, &sli_intf);
+		if_type = (sli_intf & SLI_INTF_IF_TYPE_MASK) >>
+						SLI_INTF_IF_TYPE_SHIFT;
+
+		if (((sli_intf & SLI_INTF_VALID_MASK) != SLI_INTF_VALID) ||
+			if_type != 0x02) {
+			dev_err(&pdev->dev, "SLI_INTF reg val is not valid\n");
+			return -EINVAL;
+		}
+		if (num_vfs > 0) {
+			dev_err(&pdev->dev, "VFs not supported\n");
+			return -EINVAL;
+		}
+		adapter->sli_family = ((sli_intf & SLI_INTF_FAMILY_MASK) >>
+					 SLI_INTF_FAMILY_SHIFT);
+		adapter->generation = BE_GEN3;
+		break;
+	default:
+		adapter->generation = 0;
+	}
+	return 0;
+}
+
 static int __devinit be_probe(struct pci_dev *pdev,
 			const struct pci_device_id *pdev_id)
 {
@@ -2799,22 +2912,13 @@ static int __devinit be_probe(struct pci_dev *pdev,
 		goto rel_reg;
 	}
 	adapter = netdev_priv(netdev);
-
-	switch (pdev->device) {
-	case BE_DEVICE_ID1:
-	case OC_DEVICE_ID1:
-		adapter->generation = BE_GEN2;
-		break;
-	case BE_DEVICE_ID2:
-	case OC_DEVICE_ID2:
-		adapter->generation = BE_GEN3;
-		break;
-	default:
-		adapter->generation = 0;
-	}
-
 	adapter->pdev = pdev;
 	pci_set_drvdata(pdev, adapter);
+
+	status = be_dev_family_check(adapter);
+	if (status)
+		goto free_netdev;
+
 	adapter->netdev = netdev;
 	SET_NETDEV_DEV(netdev, &pdev->dev);
 
@@ -2889,7 +2993,7 @@ ctrl_clean:
 	be_ctrl_cleanup(adapter);
 free_netdev:
 	be_sriov_disable(adapter);
-	free_netdev(adapter->netdev);
+	free_netdev(netdev);
 	pci_set_drvdata(pdev, NULL);
 rel_reg:
 	pci_release_regions(pdev);
diff --git a/drivers/net/bna/bfa_defs.h b/drivers/net/bna/bfa_defs.h
index 29c1b8de2c2..2ea0dfe1ced 100644
--- a/drivers/net/bna/bfa_defs.h
+++ b/drivers/net/bna/bfa_defs.h
@@ -112,16 +112,18 @@ struct bfa_ioc_pci_attr {
  * IOC states
  */
 enum bfa_ioc_state {
-	BFA_IOC_RESET		= 1,	/*!< IOC is in reset state */
-	BFA_IOC_SEMWAIT		= 2,	/*!< Waiting for IOC h/w semaphore */
-	BFA_IOC_HWINIT		= 3,	/*!< IOC h/w is being initialized */
-	BFA_IOC_GETATTR		= 4,	/*!< IOC is being configured */
-	BFA_IOC_OPERATIONAL	= 5,	/*!< IOC is operational */
-	BFA_IOC_INITFAIL	= 6,	/*!< IOC hardware failure */
-	BFA_IOC_HBFAIL		= 7,	/*!< IOC heart-beat failure */
-	BFA_IOC_DISABLING	= 8,	/*!< IOC is being disabled */
-	BFA_IOC_DISABLED	= 9,	/*!< IOC is disabled */
-	BFA_IOC_FWMISMATCH	= 10,	/*!< IOC f/w different from drivers */
+	BFA_IOC_UNINIT		= 1,	/*!< IOC is in uninit state */
+	BFA_IOC_RESET		= 2,	/*!< IOC is in reset state */
+	BFA_IOC_SEMWAIT		= 3,	/*!< Waiting for IOC h/w semaphore */
+	BFA_IOC_HWINIT		= 4,	/*!< IOC h/w is being initialized */
+	BFA_IOC_GETATTR		= 5,	/*!< IOC is being configured */
+	BFA_IOC_OPERATIONAL	= 6,	/*!< IOC is operational */
+	BFA_IOC_INITFAIL	= 7,	/*!< IOC hardware failure */
+	BFA_IOC_FAIL		= 8,	/*!< IOC heart-beat failure */
+	BFA_IOC_DISABLING	= 9,	/*!< IOC is being disabled */
+	BFA_IOC_DISABLED	= 10,	/*!< IOC is disabled */
+	BFA_IOC_FWMISMATCH	= 11,	/*!< IOC f/w different from drivers */
+	BFA_IOC_ENABLING	= 12,	/*!< IOC is being enabled */
 };
 
 /**
diff --git a/drivers/net/bna/bfa_defs_mfg_comm.h b/drivers/net/bna/bfa_defs_mfg_comm.h
index 987978fcb3f..fdd67761836 100644
--- a/drivers/net/bna/bfa_defs_mfg_comm.h
+++ b/drivers/net/bna/bfa_defs_mfg_comm.h
@@ -95,28 +95,6 @@ enum {
 	(type) == BFA_MFG_TYPE_CNA10P1 || \
 	bfa_mfg_is_mezz(type)))
 
-/**
- * Check if the card having old wwn/mac handling
- */
-#define bfa_mfg_is_old_wwn_mac_model(type) (( \
-	(type) == BFA_MFG_TYPE_FC8P2 || \
-	(type) == BFA_MFG_TYPE_FC8P1 || \
-	(type) == BFA_MFG_TYPE_FC4P2 || \
-	(type) == BFA_MFG_TYPE_FC4P1 || \
-	(type) == BFA_MFG_TYPE_CNA10P2 || \
-	(type) == BFA_MFG_TYPE_CNA10P1 || \
-	(type) == BFA_MFG_TYPE_JAYHAWK || \
-	(type) == BFA_MFG_TYPE_WANCHESE))
-
-#define bfa_mfg_increment_wwn_mac(m, i)				\
-do {								\
-	u32 t = ((m)[0] << 16) | ((m)[1] << 8) | (m)[2];	\
-	t += (i);						\
-	(m)[0] = (t >> 16) & 0xFF;				\
-	(m)[1] = (t >> 8) & 0xFF;				\
-	(m)[2] = t & 0xFF;					\
-} while (0)
-
 #define bfa_mfg_adapter_prop_init_flash(card_type, prop)	\
 do {								\
 	switch ((card_type)) {					\
diff --git a/drivers/net/bna/bfa_ioc.c b/drivers/net/bna/bfa_ioc.c
index e94e5aa9751..34933cb9569 100644
--- a/drivers/net/bna/bfa_ioc.c
+++ b/drivers/net/bna/bfa_ioc.c
@@ -26,25 +26,6 @@
  * IOC local definitions
  */
 
-#define bfa_ioc_timer_start(__ioc)					\
-	mod_timer(&(__ioc)->ioc_timer, jiffies +	\
-			msecs_to_jiffies(BFA_IOC_TOV))
-#define bfa_ioc_timer_stop(__ioc)   del_timer(&(__ioc)->ioc_timer)
-
-#define bfa_ioc_recovery_timer_start(__ioc)				\
-	mod_timer(&(__ioc)->ioc_timer, jiffies +	\
-			msecs_to_jiffies(BFA_IOC_TOV_RECOVER))
-
-#define bfa_sem_timer_start(__ioc)					\
-	mod_timer(&(__ioc)->sem_timer, jiffies +	\
-			msecs_to_jiffies(BFA_IOC_HWSEM_TOV))
-#define bfa_sem_timer_stop(__ioc)	del_timer(&(__ioc)->sem_timer)
-
-#define bfa_hb_timer_start(__ioc)					\
-	mod_timer(&(__ioc)->hb_timer, jiffies +		\
-			msecs_to_jiffies(BFA_IOC_HB_TOV))
-#define bfa_hb_timer_stop(__ioc)	del_timer(&(__ioc)->hb_timer)
-
 /**
  * Asic specific macros : see bfa_hw_cb.c and bfa_hw_ct.c for details.
  */
@@ -55,11 +36,16 @@
 			((__ioc)->ioc_hwif->ioc_firmware_unlock(__ioc))
 #define bfa_ioc_reg_init(__ioc) ((__ioc)->ioc_hwif->ioc_reg_init(__ioc))
 #define bfa_ioc_map_port(__ioc) ((__ioc)->ioc_hwif->ioc_map_port(__ioc))
-#define bfa_ioc_notify_hbfail(__ioc)			\
-			((__ioc)->ioc_hwif->ioc_notify_hbfail(__ioc))
-
-#define bfa_ioc_is_optrom(__ioc)	\
-	(bfa_cb_image_get_size(BFA_IOC_FWIMG_TYPE(__ioc)) < BFA_IOC_FWIMG_MINSZ)
+#define bfa_ioc_notify_fail(__ioc)			\
+			((__ioc)->ioc_hwif->ioc_notify_fail(__ioc))
+#define bfa_ioc_sync_join(__ioc)			\
+			((__ioc)->ioc_hwif->ioc_sync_join(__ioc))
+#define bfa_ioc_sync_leave(__ioc)			\
+			((__ioc)->ioc_hwif->ioc_sync_leave(__ioc))
+#define bfa_ioc_sync_ack(__ioc)				\
+			((__ioc)->ioc_hwif->ioc_sync_ack(__ioc))
+#define bfa_ioc_sync_complete(__ioc)			\
+			((__ioc)->ioc_hwif->ioc_sync_complete(__ioc))
 
 #define bfa_ioc_mbox_cmd_pending(__ioc)		\
 			(!list_empty(&((__ioc)->mbox_mod.cmd_q)) || \
@@ -85,6 +71,12 @@ static void bfa_ioc_recover(struct bfa_ioc *ioc);
 static void bfa_ioc_check_attr_wwns(struct bfa_ioc *ioc);
 static void bfa_ioc_disable_comp(struct bfa_ioc *ioc);
 static void bfa_ioc_lpu_stop(struct bfa_ioc *ioc);
+static void bfa_ioc_fail_notify(struct bfa_ioc *ioc);
+static void bfa_ioc_pf_enabled(struct bfa_ioc *ioc);
+static void bfa_ioc_pf_disabled(struct bfa_ioc *ioc);
+static void bfa_ioc_pf_initfailed(struct bfa_ioc *ioc);
+static void bfa_ioc_pf_failed(struct bfa_ioc *ioc);
+static void bfa_ioc_pf_fwmismatch(struct bfa_ioc *ioc);
 static void bfa_ioc_boot(struct bfa_ioc *ioc, u32 boot_type,
 			 u32 boot_param);
 static u32 bfa_ioc_smem_pgnum(struct bfa_ioc *ioc, u32 fmaddr);
@@ -101,72 +93,173 @@ static void bfa_ioc_get_adapter_manufacturer(struct bfa_ioc *ioc,
 						char *manufacturer);
 static void bfa_ioc_get_adapter_model(struct bfa_ioc *ioc, char *model);
 static u64 bfa_ioc_get_pwwn(struct bfa_ioc *ioc);
-static mac_t bfa_ioc_get_mfg_mac(struct bfa_ioc *ioc);
 
 /**
- * IOC state machine events
+ * IOC state machine definitions/declarations
  */
 enum ioc_event {
-	IOC_E_ENABLE		= 1,	/*!< IOC enable request		*/
-	IOC_E_DISABLE		= 2,	/*!< IOC disable request	*/
-	IOC_E_TIMEOUT		= 3,	/*!< f/w response timeout	*/
-	IOC_E_FWREADY		= 4,	/*!< f/w initialization done	*/
-	IOC_E_FWRSP_GETATTR	= 5,	/*!< IOC get attribute response	*/
-	IOC_E_FWRSP_ENABLE	= 6,	/*!< enable f/w response	*/
-	IOC_E_FWRSP_DISABLE	= 7,	/*!< disable f/w response	*/
-	IOC_E_HBFAIL		= 8,	/*!< heartbeat failure		*/
-	IOC_E_HWERROR		= 9,	/*!< hardware error interrupt	*/
-	IOC_E_SEMLOCKED		= 10,	/*!< h/w semaphore is locked	*/
-	IOC_E_DETACH		= 11,	/*!< driver detach cleanup	*/
+	IOC_E_RESET		= 1,	/*!< IOC reset request		*/
+	IOC_E_ENABLE		= 2,	/*!< IOC enable request		*/
+	IOC_E_DISABLE		= 3,	/*!< IOC disable request	*/
+	IOC_E_DETACH		= 4,	/*!< driver detach cleanup	*/
+	IOC_E_ENABLED		= 5,	/*!< f/w enabled		*/
+	IOC_E_FWRSP_GETATTR	= 6,	/*!< IOC get attribute response	*/
+	IOC_E_DISABLED		= 7,	/*!< f/w disabled		*/
+	IOC_E_INITFAILED	= 8,	/*!< failure notice by iocpf sm	*/
+	IOC_E_PFAILED		= 9,	/*!< failure notice by iocpf sm	*/
+	IOC_E_HBFAIL		= 10,	/*!< heartbeat failure		*/
+	IOC_E_HWERROR		= 11,	/*!< hardware error interrupt	*/
+	IOC_E_TIMEOUT		= 12,	/*!< timeout			*/
 };
 
+bfa_fsm_state_decl(bfa_ioc, uninit, struct bfa_ioc, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, reset, struct bfa_ioc, enum ioc_event);
-bfa_fsm_state_decl(bfa_ioc, fwcheck, struct bfa_ioc, enum ioc_event);
-bfa_fsm_state_decl(bfa_ioc, mismatch, struct bfa_ioc, enum ioc_event);
-bfa_fsm_state_decl(bfa_ioc, semwait, struct bfa_ioc, enum ioc_event);
-bfa_fsm_state_decl(bfa_ioc, hwinit, struct bfa_ioc, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, enabling, struct bfa_ioc, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, getattr, struct bfa_ioc, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, op, struct bfa_ioc, enum ioc_event);
-bfa_fsm_state_decl(bfa_ioc, initfail, struct bfa_ioc, enum ioc_event);
-bfa_fsm_state_decl(bfa_ioc, hbfail, struct bfa_ioc, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, fail_retry, struct bfa_ioc, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, fail, struct bfa_ioc, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, disabling, struct bfa_ioc, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, disabled, struct bfa_ioc, enum ioc_event);
 
 static struct bfa_sm_table ioc_sm_table[] = {
+	{BFA_SM(bfa_ioc_sm_uninit), BFA_IOC_UNINIT},
 	{BFA_SM(bfa_ioc_sm_reset), BFA_IOC_RESET},
-	{BFA_SM(bfa_ioc_sm_fwcheck), BFA_IOC_FWMISMATCH},
-	{BFA_SM(bfa_ioc_sm_mismatch), BFA_IOC_FWMISMATCH},
-	{BFA_SM(bfa_ioc_sm_semwait), BFA_IOC_SEMWAIT},
-	{BFA_SM(bfa_ioc_sm_hwinit), BFA_IOC_HWINIT},
-	{BFA_SM(bfa_ioc_sm_enabling), BFA_IOC_HWINIT},
+	{BFA_SM(bfa_ioc_sm_enabling), BFA_IOC_ENABLING},
 	{BFA_SM(bfa_ioc_sm_getattr), BFA_IOC_GETATTR},
 	{BFA_SM(bfa_ioc_sm_op), BFA_IOC_OPERATIONAL},
-	{BFA_SM(bfa_ioc_sm_initfail), BFA_IOC_INITFAIL},
-	{BFA_SM(bfa_ioc_sm_hbfail), BFA_IOC_HBFAIL},
+	{BFA_SM(bfa_ioc_sm_fail_retry), BFA_IOC_INITFAIL},
+	{BFA_SM(bfa_ioc_sm_fail), BFA_IOC_FAIL},
 	{BFA_SM(bfa_ioc_sm_disabling), BFA_IOC_DISABLING},
 	{BFA_SM(bfa_ioc_sm_disabled), BFA_IOC_DISABLED},
 };
 
 /**
+ * IOCPF state machine definitions/declarations
+ */
+
+/*
+ * Forward declareations for iocpf state machine
+ */
+static void bfa_iocpf_enable(struct bfa_ioc *ioc);
+static void bfa_iocpf_disable(struct bfa_ioc *ioc);
+static void bfa_iocpf_fail(struct bfa_ioc *ioc);
+static void bfa_iocpf_initfail(struct bfa_ioc *ioc);
+static void bfa_iocpf_getattrfail(struct bfa_ioc *ioc);
+static void bfa_iocpf_stop(struct bfa_ioc *ioc);
+
+/**
+ * IOCPF state machine events
+ */
+enum iocpf_event {
+	IOCPF_E_ENABLE		= 1,	/*!< IOCPF enable request	*/
+	IOCPF_E_DISABLE		= 2,	/*!< IOCPF disable request	*/
+	IOCPF_E_STOP		= 3,	/*!< stop on driver detach	*/
+	IOCPF_E_FWREADY	 	= 4,	/*!< f/w initialization done	*/
+	IOCPF_E_FWRSP_ENABLE	= 5,	/*!< enable f/w response	*/
+	IOCPF_E_FWRSP_DISABLE	= 6,	/*!< disable f/w response	*/
+	IOCPF_E_FAIL		= 7,	/*!< failure notice by ioc sm	*/
+	IOCPF_E_INITFAIL	= 8,	/*!< init fail notice by ioc sm	*/
+	IOCPF_E_GETATTRFAIL	= 9,	/*!< init fail notice by ioc sm	*/
+	IOCPF_E_SEMLOCKED	= 10,   /*!< h/w semaphore is locked	*/
+	IOCPF_E_TIMEOUT		= 11,   /*!< f/w response timeout	*/
+};
+
+/**
+ * IOCPF states
+ */
+enum bfa_iocpf_state {
+	BFA_IOCPF_RESET		= 1,	/*!< IOC is in reset state */
+	BFA_IOCPF_SEMWAIT	= 2,	/*!< Waiting for IOC h/w semaphore */
+	BFA_IOCPF_HWINIT	= 3,	/*!< IOC h/w is being initialized */
+	BFA_IOCPF_READY		= 4,	/*!< IOCPF is initialized */
+	BFA_IOCPF_INITFAIL	= 5,	/*!< IOCPF failed */
+	BFA_IOCPF_FAIL		= 6,	/*!< IOCPF failed */
+	BFA_IOCPF_DISABLING	= 7,	/*!< IOCPF is being disabled */
+	BFA_IOCPF_DISABLED	= 8,	/*!< IOCPF is disabled */
+	BFA_IOCPF_FWMISMATCH	= 9,	/*!< IOC f/w different from drivers */
+};
+
+bfa_fsm_state_decl(bfa_iocpf, reset, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, fwcheck, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, mismatch, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, semwait, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, hwinit, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, enabling, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, ready, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, initfail_sync, struct bfa_iocpf,
+						enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, initfail, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, fail_sync, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, fail, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, disabling, struct bfa_iocpf, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, disabling_sync, struct bfa_iocpf,
+						enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, disabled, struct bfa_iocpf, enum iocpf_event);
+
+static struct bfa_sm_table iocpf_sm_table[] = {
+	{BFA_SM(bfa_iocpf_sm_reset), BFA_IOCPF_RESET},
+	{BFA_SM(bfa_iocpf_sm_fwcheck), BFA_IOCPF_FWMISMATCH},
+	{BFA_SM(bfa_iocpf_sm_mismatch), BFA_IOCPF_FWMISMATCH},
+	{BFA_SM(bfa_iocpf_sm_semwait), BFA_IOCPF_SEMWAIT},
+	{BFA_SM(bfa_iocpf_sm_hwinit), BFA_IOCPF_HWINIT},
+	{BFA_SM(bfa_iocpf_sm_enabling), BFA_IOCPF_HWINIT},
+	{BFA_SM(bfa_iocpf_sm_ready), BFA_IOCPF_READY},
+	{BFA_SM(bfa_iocpf_sm_initfail_sync), BFA_IOCPF_INITFAIL},
+	{BFA_SM(bfa_iocpf_sm_initfail), BFA_IOCPF_INITFAIL},
+	{BFA_SM(bfa_iocpf_sm_fail_sync), BFA_IOCPF_FAIL},
+	{BFA_SM(bfa_iocpf_sm_fail), BFA_IOCPF_FAIL},
+	{BFA_SM(bfa_iocpf_sm_disabling), BFA_IOCPF_DISABLING},
+	{BFA_SM(bfa_iocpf_sm_disabling_sync), BFA_IOCPF_DISABLING},
+	{BFA_SM(bfa_iocpf_sm_disabled), BFA_IOCPF_DISABLED},
+};
+
+/**
+ * IOC State Machine
+ */
+
+/**
+ * Beginning state. IOC uninit state.
+ */
+static void
+bfa_ioc_sm_uninit_entry(struct bfa_ioc *ioc)
+{
+}
+
+/**
+ * IOC is in uninit state.
+ */
+static void
+bfa_ioc_sm_uninit(struct bfa_ioc *ioc, enum ioc_event event)
+{
+	switch (event) {
+	case IOC_E_RESET:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+/**
  * Reset entry actions -- initialize state machine
  */
 static void
 bfa_ioc_sm_reset_entry(struct bfa_ioc *ioc)
 {
-	ioc->retry_count = 0;
-	ioc->auto_recover = bfa_nw_auto_recover;
+	bfa_fsm_set_state(&ioc->iocpf, bfa_iocpf_sm_reset);
 }
 
 /**
- * Beginning state. IOC is in reset state.
+ * IOC is in reset state.
  */
 static void
 bfa_ioc_sm_reset(struct bfa_ioc *ioc, enum ioc_event event)
 {
 	switch (event) {
 	case IOC_E_ENABLE:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_fwcheck);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_enabling);
 		break;
 
 	case IOC_E_DISABLE:
@@ -174,6 +267,7 @@ bfa_ioc_sm_reset(struct bfa_ioc *ioc, enum ioc_event event)
 		break;
 
 	case IOC_E_DETACH:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
 		break;
 
 	default:
@@ -181,42 +275,43 @@ bfa_ioc_sm_reset(struct bfa_ioc *ioc, enum ioc_event event)
 	}
 }
 
-/**
- * Semaphore should be acquired for version check.
- */
 static void
-bfa_ioc_sm_fwcheck_entry(struct bfa_ioc *ioc)
+bfa_ioc_sm_enabling_entry(struct bfa_ioc *ioc)
 {
-	bfa_ioc_hw_sem_get(ioc);
+	bfa_iocpf_enable(ioc);
 }
 
 /**
- * Awaiting h/w semaphore to continue with version check.
+ * Host IOC function is being enabled, awaiting response from firmware.
+ * Semaphore is acquired.
  */
 static void
-bfa_ioc_sm_fwcheck(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_ioc_sm_enabling(struct bfa_ioc *ioc, enum ioc_event event)
 {
 	switch (event) {
-	case IOC_E_SEMLOCKED:
-		if (bfa_ioc_firmware_lock(ioc)) {
-			ioc->retry_count = 0;
-			bfa_fsm_set_state(ioc, bfa_ioc_sm_hwinit);
-		} else {
-			bfa_nw_ioc_hw_sem_release(ioc);
-			bfa_fsm_set_state(ioc, bfa_ioc_sm_mismatch);
-		}
+	case IOC_E_ENABLED:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_getattr);
+		break;
+
+	case IOC_E_PFAILED:
+		/* !!! fall through !!! */
+	case IOC_E_HWERROR:
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail_retry);
+		if (event != IOC_E_PFAILED)
+			bfa_iocpf_initfail(ioc);
 		break;
 
 	case IOC_E_DISABLE:
-		bfa_ioc_disable_comp(ioc);
-		/* fall through */
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
+		break;
 
 	case IOC_E_DETACH:
-		bfa_ioc_hw_sem_get_cancel(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
+		bfa_iocpf_stop(ioc);
 		break;
 
-	case IOC_E_FWREADY:
+	case IOC_E_ENABLE:
 		break;
 
 	default:
@@ -225,41 +320,85 @@ bfa_ioc_sm_fwcheck(struct bfa_ioc *ioc, enum ioc_event event)
 }
 
 /**
- * Notify enable completion callback and generate mismatch AEN.
+ * Semaphore should be acquired for version check.
  */
 static void
-bfa_ioc_sm_mismatch_entry(struct bfa_ioc *ioc)
+bfa_ioc_sm_getattr_entry(struct bfa_ioc *ioc)
 {
-	/**
-	 * Provide enable completion callback and AEN notification only once.
-	 */
-	if (ioc->retry_count == 0)
-		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
-	ioc->retry_count++;
-	bfa_ioc_timer_start(ioc);
+	mod_timer(&ioc->ioc_timer, jiffies +
+		msecs_to_jiffies(BFA_IOC_TOV));
+	bfa_ioc_send_getattr(ioc);
 }
 
 /**
- * Awaiting firmware version match.
+ * IOC configuration in progress. Timer is active.
  */
 static void
-bfa_ioc_sm_mismatch(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_ioc_sm_getattr(struct bfa_ioc *ioc, enum ioc_event event)
 {
 	switch (event) {
+	case IOC_E_FWRSP_GETATTR:
+		del_timer(&ioc->ioc_timer);
+		bfa_ioc_check_attr_wwns(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_op);
+		break;
+
+	case IOC_E_PFAILED:
+	case IOC_E_HWERROR:
+		del_timer(&ioc->ioc_timer);
+		/* fall through */
 	case IOC_E_TIMEOUT:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_fwcheck);
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail_retry);
+		if (event != IOC_E_PFAILED)
+			bfa_iocpf_getattrfail(ioc);
 		break;
 
 	case IOC_E_DISABLE:
-		bfa_ioc_disable_comp(ioc);
-		/* fall through */
+		del_timer(&ioc->ioc_timer);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
+		break;
 
-	case IOC_E_DETACH:
-		bfa_ioc_timer_stop(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+	case IOC_E_ENABLE:
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+static void
+bfa_ioc_sm_op_entry(struct bfa_ioc *ioc)
+{
+	ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_OK);
+	bfa_ioc_hb_monitor(ioc);
+}
+
+static void
+bfa_ioc_sm_op(struct bfa_ioc *ioc, enum ioc_event event)
+{
+	switch (event) {
+	case IOC_E_ENABLE:
+		break;
+
+	case IOC_E_DISABLE:
+		bfa_ioc_hb_stop(ioc);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
 		break;
 
-	case IOC_E_FWREADY:
+	case IOC_E_PFAILED:
+	case IOC_E_HWERROR:
+		bfa_ioc_hb_stop(ioc);
+		/* !!! fall through !!! */
+	case IOC_E_HBFAIL:
+		bfa_ioc_fail_notify(ioc);
+		if (ioc->iocpf.auto_recover)
+			bfa_fsm_set_state(ioc, bfa_ioc_sm_fail_retry);
+		else
+			bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
+
+		if (event != IOC_E_PFAILED)
+			bfa_iocpf_fail(ioc);
 		break;
 
 	default:
@@ -267,30 +406,61 @@ bfa_ioc_sm_mismatch(struct bfa_ioc *ioc, enum ioc_event event)
 	}
 }
 
+static void
+bfa_ioc_sm_disabling_entry(struct bfa_ioc *ioc)
+{
+	bfa_iocpf_disable(ioc);
+}
+
 /**
- * Request for semaphore.
+ * IOC is being desabled
  */
 static void
-bfa_ioc_sm_semwait_entry(struct bfa_ioc *ioc)
+bfa_ioc_sm_disabling(struct bfa_ioc *ioc, enum ioc_event event)
 {
-	bfa_ioc_hw_sem_get(ioc);
+	switch (event) {
+	case IOC_E_DISABLED:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		break;
+
+	case IOC_E_HWERROR:
+		/*
+		 * No state change.  Will move to disabled state
+		 * after iocpf sm completes failure processing and
+		 * moves to disabled state.
+		 */
+		bfa_iocpf_fail(ioc);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
 }
 
 /**
- * Awaiting semaphore for h/w initialzation.
+ * IOC desable completion entry.
  */
 static void
-bfa_ioc_sm_semwait(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_ioc_sm_disabled_entry(struct bfa_ioc *ioc)
+{
+	bfa_ioc_disable_comp(ioc);
+}
+
+static void
+bfa_ioc_sm_disabled(struct bfa_ioc *ioc, enum ioc_event event)
 {
 	switch (event) {
-	case IOC_E_SEMLOCKED:
-		ioc->retry_count = 0;
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_hwinit);
+	case IOC_E_ENABLE:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_enabling);
 		break;
 
 	case IOC_E_DISABLE:
-		bfa_ioc_hw_sem_get_cancel(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		ioc->cbfn->disable_cbfn(ioc->bfa);
+		break;
+
+	case IOC_E_DETACH:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
+		bfa_iocpf_stop(ioc);
 		break;
 
 	default:
@@ -299,46 +469,45 @@ bfa_ioc_sm_semwait(struct bfa_ioc *ioc, enum ioc_event event)
 }
 
 static void
-bfa_ioc_sm_hwinit_entry(struct bfa_ioc *ioc)
+bfa_ioc_sm_fail_retry_entry(struct bfa_ioc *ioc)
 {
-	bfa_ioc_timer_start(ioc);
-	bfa_ioc_reset(ioc, false);
 }
 
 /**
- * @brief
- * Hardware is being initialized. Interrupts are enabled.
- * Holding hardware semaphore lock.
+ * Hardware initialization retry.
  */
 static void
-bfa_ioc_sm_hwinit(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_ioc_sm_fail_retry(struct bfa_ioc *ioc, enum ioc_event event)
 {
 	switch (event) {
-	case IOC_E_FWREADY:
-		bfa_ioc_timer_stop(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_enabling);
+	case IOC_E_ENABLED:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_getattr);
 		break;
 
+	case IOC_E_PFAILED:
 	case IOC_E_HWERROR:
-		bfa_ioc_timer_stop(ioc);
-		/* fall through */
+		/**
+		 * Initialization retry failed.
+		 */
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		if (event != IOC_E_PFAILED)
+			bfa_iocpf_initfail(ioc);
+		break;
 
-	case IOC_E_TIMEOUT:
-		ioc->retry_count++;
-		if (ioc->retry_count < BFA_IOC_HWINIT_MAX) {
-			bfa_ioc_timer_start(ioc);
-			bfa_ioc_reset(ioc, true);
-			break;
-		}
+	case IOC_E_INITFAILED:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
+		break;
 
-		bfa_nw_ioc_hw_sem_release(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
+	case IOC_E_ENABLE:
 		break;
 
 	case IOC_E_DISABLE:
-		bfa_nw_ioc_hw_sem_release(ioc);
-		bfa_ioc_timer_stop(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
+		break;
+
+	case IOC_E_DETACH:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
+		bfa_iocpf_stop(ioc);
 		break;
 
 	default:
@@ -347,51 +516,248 @@ bfa_ioc_sm_hwinit(struct bfa_ioc *ioc, enum ioc_event event)
 }
 
 static void
-bfa_ioc_sm_enabling_entry(struct bfa_ioc *ioc)
+bfa_ioc_sm_fail_entry(struct bfa_ioc *ioc)
 {
-	bfa_ioc_timer_start(ioc);
-	bfa_ioc_send_enable(ioc);
 }
 
 /**
- * Host IOC function is being enabled, awaiting response from firmware.
- * Semaphore is acquired.
+ * IOC failure.
  */
 static void
-bfa_ioc_sm_enabling(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_ioc_sm_fail(struct bfa_ioc *ioc, enum ioc_event event)
 {
 	switch (event) {
-	case IOC_E_FWRSP_ENABLE:
-		bfa_ioc_timer_stop(ioc);
-		bfa_nw_ioc_hw_sem_release(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_getattr);
+	case IOC_E_ENABLE:
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		break;
+
+	case IOC_E_DISABLE:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
+		break;
+
+	case IOC_E_DETACH:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
+		bfa_iocpf_stop(ioc);
 		break;
 
 	case IOC_E_HWERROR:
-		bfa_ioc_timer_stop(ioc);
-		/* fall through */
+		/* HB failure notification, ignore. */
+		break;
 
-	case IOC_E_TIMEOUT:
-		ioc->retry_count++;
-		if (ioc->retry_count < BFA_IOC_HWINIT_MAX) {
-			writel(BFI_IOC_UNINIT,
-				      ioc->ioc_regs.ioc_fwstate);
-			bfa_fsm_set_state(ioc, bfa_ioc_sm_hwinit);
-			break;
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+/**
+ * IOCPF State Machine
+ */
+
+/**
+ * Reset entry actions -- initialize state machine
+ */
+static void
+bfa_iocpf_sm_reset_entry(struct bfa_iocpf *iocpf)
+{
+	iocpf->retry_count = 0;
+	iocpf->auto_recover = bfa_nw_auto_recover;
+}
+
+/**
+ * Beginning state. IOC is in reset state.
+ */
+static void
+bfa_iocpf_sm_reset(struct bfa_iocpf *iocpf, enum iocpf_event event)
+{
+	switch (event) {
+	case IOCPF_E_ENABLE:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fwcheck);
+		break;
+
+	case IOCPF_E_STOP:
+		break;
+
+	default:
+		bfa_sm_fault(iocpf->ioc, event);
+	}
+}
+
+/**
+ * Semaphore should be acquired for version check.
+ */
+static void
+bfa_iocpf_sm_fwcheck_entry(struct bfa_iocpf *iocpf)
+{
+	bfa_ioc_hw_sem_get(iocpf->ioc);
+}
+
+/**
+ * Awaiting h/w semaphore to continue with version check.
+ */
+static void
+bfa_iocpf_sm_fwcheck(struct bfa_iocpf *iocpf, enum iocpf_event event)
+{
+	struct bfa_ioc *ioc = iocpf->ioc;
+
+	switch (event) {
+	case IOCPF_E_SEMLOCKED:
+		if (bfa_ioc_firmware_lock(ioc)) {
+			if (bfa_ioc_sync_complete(ioc)) {
+				iocpf->retry_count = 0;
+				bfa_ioc_sync_join(ioc);
+				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
+			} else {
+				bfa_ioc_firmware_unlock(ioc);
+				bfa_nw_ioc_hw_sem_release(ioc);
+				mod_timer(&ioc->sem_timer, jiffies +
+					msecs_to_jiffies(BFA_IOC_HWSEM_TOV));
+			}
+		} else {
+			bfa_nw_ioc_hw_sem_release(ioc);
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_mismatch);
 		}
+		break;
 
-		bfa_nw_ioc_hw_sem_release(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
+	case IOCPF_E_DISABLE:
+		bfa_ioc_hw_sem_get_cancel(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
+		bfa_ioc_pf_disabled(ioc);
 		break;
 
-	case IOC_E_DISABLE:
-		bfa_ioc_timer_stop(ioc);
+	case IOCPF_E_STOP:
+		bfa_ioc_hw_sem_get_cancel(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+/**
+ * Notify enable completion callback
+ */
+static void
+bfa_iocpf_sm_mismatch_entry(struct bfa_iocpf *iocpf)
+{
+	/* Call only the first time sm enters fwmismatch state. */
+	if (iocpf->retry_count == 0)
+		bfa_ioc_pf_fwmismatch(iocpf->ioc);
+
+	iocpf->retry_count++;
+	mod_timer(&(iocpf->ioc)->iocpf_timer, jiffies +
+		msecs_to_jiffies(BFA_IOC_TOV));
+}
+
+/**
+ * Awaiting firmware version match.
+ */
+static void
+bfa_iocpf_sm_mismatch(struct bfa_iocpf *iocpf, enum iocpf_event event)
+{
+	struct bfa_ioc *ioc = iocpf->ioc;
+
+	switch (event) {
+	case IOCPF_E_TIMEOUT:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fwcheck);
+		break;
+
+	case IOCPF_E_DISABLE:
+		del_timer(&ioc->iocpf_timer);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
+		bfa_ioc_pf_disabled(ioc);
+		break;
+
+	case IOCPF_E_STOP:
+		del_timer(&ioc->iocpf_timer);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+/**
+ * Request for semaphore.
+ */
+static void
+bfa_iocpf_sm_semwait_entry(struct bfa_iocpf *iocpf)
+{
+	bfa_ioc_hw_sem_get(iocpf->ioc);
+}
+
+/**
+ * Awaiting semaphore for h/w initialzation.
+ */
+static void
+bfa_iocpf_sm_semwait(struct bfa_iocpf *iocpf, enum iocpf_event event)
+{
+	struct bfa_ioc *ioc = iocpf->ioc;
+
+	switch (event) {
+	case IOCPF_E_SEMLOCKED:
+		if (bfa_ioc_sync_complete(ioc)) {
+			bfa_ioc_sync_join(ioc);
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
+		} else {
+			bfa_nw_ioc_hw_sem_release(ioc);
+			mod_timer(&ioc->sem_timer, jiffies +
+				msecs_to_jiffies(BFA_IOC_HWSEM_TOV));
+		}
+		break;
+
+	case IOCPF_E_DISABLE:
+		bfa_ioc_hw_sem_get_cancel(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+static void
+bfa_iocpf_sm_hwinit_entry(struct bfa_iocpf *iocpf)
+{
+	mod_timer(&(iocpf->ioc)->iocpf_timer, jiffies +
+		msecs_to_jiffies(BFA_IOC_TOV));
+	bfa_ioc_reset(iocpf->ioc, 0);
+}
+
+/**
+ * Hardware is being initialized. Interrupts are enabled.
+ * Holding hardware semaphore lock.
+ */
+static void
+bfa_iocpf_sm_hwinit(struct bfa_iocpf *iocpf, enum iocpf_event event)
+{
+	struct bfa_ioc *ioc = iocpf->ioc;
+
+	switch (event) {
+	case IOCPF_E_FWREADY:
+		del_timer(&ioc->iocpf_timer);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_enabling);
+		break;
+
+	case IOCPF_E_INITFAIL:
+		del_timer(&ioc->iocpf_timer);
+		/*
+		 * !!! fall through !!!
+		 */
+
+	case IOCPF_E_TIMEOUT:
 		bfa_nw_ioc_hw_sem_release(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		if (event == IOCPF_E_TIMEOUT)
+			bfa_ioc_pf_failed(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail_sync);
 		break;
 
-	case IOC_E_FWREADY:
-		bfa_ioc_send_enable(ioc);
+	case IOCPF_E_DISABLE:
+		del_timer(&ioc->iocpf_timer);
+		bfa_ioc_sync_leave(ioc);
+		bfa_nw_ioc_hw_sem_release(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
 		break;
 
 	default:
@@ -400,37 +766,49 @@ bfa_ioc_sm_enabling(struct bfa_ioc *ioc, enum ioc_event event)
 }
 
 static void
-bfa_ioc_sm_getattr_entry(struct bfa_ioc *ioc)
+bfa_iocpf_sm_enabling_entry(struct bfa_iocpf *iocpf)
 {
-	bfa_ioc_timer_start(ioc);
-	bfa_ioc_send_getattr(ioc);
+	mod_timer(&(iocpf->ioc)->iocpf_timer, jiffies +
+		msecs_to_jiffies(BFA_IOC_TOV));
+	bfa_ioc_send_enable(iocpf->ioc);
 }
 
 /**
- * @brief
- * IOC configuration in progress. Timer is active.
+ * Host IOC function is being enabled, awaiting response from firmware.
+ * Semaphore is acquired.
  */
 static void
-bfa_ioc_sm_getattr(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_iocpf_sm_enabling(struct bfa_iocpf *iocpf, enum iocpf_event event)
 {
+	struct bfa_ioc *ioc = iocpf->ioc;
+
 	switch (event) {
-	case IOC_E_FWRSP_GETATTR:
-		bfa_ioc_timer_stop(ioc);
-		bfa_ioc_check_attr_wwns(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_op);
+	case IOCPF_E_FWRSP_ENABLE:
+		del_timer(&ioc->iocpf_timer);
+		bfa_nw_ioc_hw_sem_release(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_ready);
 		break;
 
-	case IOC_E_HWERROR:
-		bfa_ioc_timer_stop(ioc);
-		/* fall through */
+	case IOCPF_E_INITFAIL:
+		del_timer(&ioc->iocpf_timer);
+		/*
+		 * !!! fall through !!!
+		 */
+	case IOCPF_E_TIMEOUT:
+		bfa_nw_ioc_hw_sem_release(ioc);
+		if (event == IOCPF_E_TIMEOUT)
+			bfa_ioc_pf_failed(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail_sync);
+		break;
 
-	case IOC_E_TIMEOUT:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
+	case IOCPF_E_DISABLE:
+		del_timer(&ioc->iocpf_timer);
+		bfa_nw_ioc_hw_sem_release(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling);
 		break;
 
-	case IOC_E_DISABLE:
-		bfa_ioc_timer_stop(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+	case IOCPF_E_FWREADY:
+		bfa_ioc_send_enable(ioc);
 		break;
 
 	default:
@@ -438,36 +816,42 @@ bfa_ioc_sm_getattr(struct bfa_ioc *ioc, enum ioc_event event)
 	}
 }
 
+static bool
+bfa_nw_ioc_is_operational(struct bfa_ioc *ioc)
+{
+	return bfa_fsm_cmp_state(ioc, bfa_ioc_sm_op);
+}
+
 static void
-bfa_ioc_sm_op_entry(struct bfa_ioc *ioc)
+bfa_iocpf_sm_ready_entry(struct bfa_iocpf *iocpf)
 {
-	ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_OK);
-	bfa_ioc_hb_monitor(ioc);
+	bfa_ioc_pf_enabled(iocpf->ioc);
 }
 
 static void
-bfa_ioc_sm_op(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_iocpf_sm_ready(struct bfa_iocpf *iocpf, enum iocpf_event event)
 {
+	struct bfa_ioc *ioc = iocpf->ioc;
+
 	switch (event) {
-	case IOC_E_ENABLE:
+	case IOCPF_E_DISABLE:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling);
 		break;
 
-	case IOC_E_DISABLE:
-		bfa_ioc_hb_stop(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
+	case IOCPF_E_GETATTRFAIL:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail_sync);
 		break;
 
-	case IOC_E_HWERROR:
-	case IOC_E_FWREADY:
-		/**
-		 * Hard error or IOC recovery by other function.
-		 * Treat it same as heartbeat failure.
-		 */
-		bfa_ioc_hb_stop(ioc);
-		/* !!! fall through !!! */
+	case IOCPF_E_FAIL:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail_sync);
+		break;
 
-	case IOC_E_HBFAIL:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_hbfail);
+	case IOCPF_E_FWREADY:
+		bfa_ioc_pf_failed(ioc);
+		if (bfa_nw_ioc_is_operational(ioc))
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail_sync);
+		else
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail_sync);
 		break;
 
 	default:
@@ -476,33 +860,40 @@ bfa_ioc_sm_op(struct bfa_ioc *ioc, enum ioc_event event)
 }
 
 static void
-bfa_ioc_sm_disabling_entry(struct bfa_ioc *ioc)
+bfa_iocpf_sm_disabling_entry(struct bfa_iocpf *iocpf)
 {
-	bfa_ioc_timer_start(ioc);
-	bfa_ioc_send_disable(ioc);
+	mod_timer(&(iocpf->ioc)->iocpf_timer, jiffies +
+		msecs_to_jiffies(BFA_IOC_TOV));
+	bfa_ioc_send_disable(iocpf->ioc);
 }
 
 /**
  * IOC is being disabled
  */
 static void
-bfa_ioc_sm_disabling(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_iocpf_sm_disabling(struct bfa_iocpf *iocpf, enum iocpf_event event)
 {
+	struct bfa_ioc *ioc = iocpf->ioc;
+
 	switch (event) {
-	case IOC_E_FWRSP_DISABLE:
-		bfa_ioc_timer_stop(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+	case IOCPF_E_FWRSP_DISABLE:
+	case IOCPF_E_FWREADY:
+		del_timer(&ioc->iocpf_timer);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
 		break;
 
-	case IOC_E_HWERROR:
-		bfa_ioc_timer_stop(ioc);
+	case IOCPF_E_FAIL:
+		del_timer(&ioc->iocpf_timer);
 		/*
 		 * !!! fall through !!!
 		 */
 
-	case IOC_E_TIMEOUT:
+	case IOCPF_E_TIMEOUT:
 		writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
+		break;
+
+	case IOCPF_E_FWRSP_ENABLE:
 		break;
 
 	default:
@@ -510,33 +901,58 @@ bfa_ioc_sm_disabling(struct bfa_ioc *ioc, enum ioc_event event)
 	}
 }
 
-/**
- * IOC disable completion entry.
- */
 static void
-bfa_ioc_sm_disabled_entry(struct bfa_ioc *ioc)
+bfa_iocpf_sm_disabling_sync_entry(struct bfa_iocpf *iocpf)
 {
-	bfa_ioc_disable_comp(ioc);
+	bfa_ioc_hw_sem_get(iocpf->ioc);
 }
 
+/**
+ * IOC hb ack request is being removed.
+ */
 static void
-bfa_ioc_sm_disabled(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_iocpf_sm_disabling_sync(struct bfa_iocpf *iocpf, enum iocpf_event event)
 {
+	struct bfa_ioc *ioc = iocpf->ioc;
+
 	switch (event) {
-	case IOC_E_ENABLE:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_semwait);
+	case IOCPF_E_SEMLOCKED:
+		bfa_ioc_sync_leave(ioc);
+		bfa_nw_ioc_hw_sem_release(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
 		break;
 
-	case IOC_E_DISABLE:
-		ioc->cbfn->disable_cbfn(ioc->bfa);
+	case IOCPF_E_FAIL:
 		break;
 
-	case IOC_E_FWREADY:
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+/**
+ * IOC disable completion entry.
+ */
+static void
+bfa_iocpf_sm_disabled_entry(struct bfa_iocpf *iocpf)
+{
+	bfa_ioc_pf_disabled(iocpf->ioc);
+}
+
+static void
+bfa_iocpf_sm_disabled(struct bfa_iocpf *iocpf, enum iocpf_event event)
+{
+	struct bfa_ioc *ioc = iocpf->ioc;
+
+	switch (event) {
+	case IOCPF_E_ENABLE:
+		iocpf->retry_count = 0;
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_semwait);
 		break;
 
-	case IOC_E_DETACH:
+	case IOCPF_E_STOP:
 		bfa_ioc_firmware_unlock(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
 		break;
 
 	default:
@@ -545,33 +961,50 @@ bfa_ioc_sm_disabled(struct bfa_ioc *ioc, enum ioc_event event)
 }
 
 static void
-bfa_ioc_sm_initfail_entry(struct bfa_ioc *ioc)
+bfa_iocpf_sm_initfail_sync_entry(struct bfa_iocpf *iocpf)
 {
-	ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
-	bfa_ioc_timer_start(ioc);
+	bfa_ioc_hw_sem_get(iocpf->ioc);
 }
 
 /**
- * @brief
  * Hardware initialization failed.
  */
 static void
-bfa_ioc_sm_initfail(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_iocpf_sm_initfail_sync(struct bfa_iocpf *iocpf, enum iocpf_event event)
 {
+	struct bfa_ioc *ioc = iocpf->ioc;
+
 	switch (event) {
-	case IOC_E_DISABLE:
-		bfa_ioc_timer_stop(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+	case IOCPF_E_SEMLOCKED:
+		bfa_ioc_notify_fail(ioc);
+		bfa_ioc_sync_ack(ioc);
+		iocpf->retry_count++;
+		if (iocpf->retry_count >= BFA_IOC_HWINIT_MAX) {
+			bfa_ioc_sync_leave(ioc);
+			bfa_nw_ioc_hw_sem_release(ioc);
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail);
+		} else {
+			if (bfa_ioc_sync_complete(ioc))
+				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
+			else {
+				bfa_nw_ioc_hw_sem_release(ioc);
+				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_semwait);
+			}
+		}
 		break;
 
-	case IOC_E_DETACH:
-		bfa_ioc_timer_stop(ioc);
+	case IOCPF_E_DISABLE:
+		bfa_ioc_hw_sem_get_cancel(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
+		break;
+
+	case IOCPF_E_STOP:
+		bfa_ioc_hw_sem_get_cancel(ioc);
 		bfa_ioc_firmware_unlock(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
 		break;
 
-	case IOC_E_TIMEOUT:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_semwait);
+	case IOCPF_E_FAIL:
 		break;
 
 	default:
@@ -580,80 +1013,108 @@ bfa_ioc_sm_initfail(struct bfa_ioc *ioc, enum ioc_event event)
 }
 
 static void
-bfa_ioc_sm_hbfail_entry(struct bfa_ioc *ioc)
+bfa_iocpf_sm_initfail_entry(struct bfa_iocpf *iocpf)
 {
-	struct list_head			*qe;
-	struct bfa_ioc_hbfail_notify *notify;
+	bfa_ioc_pf_initfailed(iocpf->ioc);
+}
 
-	/**
-	 * Mark IOC as failed in hardware and stop firmware.
-	 */
-	bfa_ioc_lpu_stop(ioc);
-	writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate);
+/**
+ * Hardware initialization failed.
+ */
+static void
+bfa_iocpf_sm_initfail(struct bfa_iocpf *iocpf, enum iocpf_event event)
+{
+	struct bfa_ioc *ioc = iocpf->ioc;
 
-	/**
-	 * Notify other functions on HB failure.
-	 */
-	bfa_ioc_notify_hbfail(ioc);
+	switch (event) {
+	case IOCPF_E_DISABLE:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
+		break;
 
-	/**
-	 * Notify driver and common modules registered for notification.
-	 */
-	ioc->cbfn->hbfail_cbfn(ioc->bfa);
-	list_for_each(qe, &ioc->hb_notify_q) {
-		notify = (struct bfa_ioc_hbfail_notify *) qe;
-		notify->cbfn(notify->cbarg);
+	case IOCPF_E_STOP:
+		bfa_ioc_firmware_unlock(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
 	}
+}
 
+static void
+bfa_iocpf_sm_fail_sync_entry(struct bfa_iocpf *iocpf)
+{
 	/**
-	 * Flush any queued up mailbox requests.
+	 * Mark IOC as failed in hardware and stop firmware.
 	 */
-	bfa_ioc_mbox_hbfail(ioc);
+	bfa_ioc_lpu_stop(iocpf->ioc);
 
 	/**
-	 * Trigger auto-recovery after a delay.
+	 * Flush any queued up mailbox requests.
 	 */
-	if (ioc->auto_recover)
-		mod_timer(&ioc->ioc_timer, jiffies +
-			msecs_to_jiffies(BFA_IOC_TOV_RECOVER));
+	bfa_ioc_mbox_hbfail(iocpf->ioc);
+	bfa_ioc_hw_sem_get(iocpf->ioc);
 }
 
 /**
- * @brief
- * IOC heartbeat failure.
+ * IOC is in failed state.
  */
 static void
-bfa_ioc_sm_hbfail(struct bfa_ioc *ioc, enum ioc_event event)
+bfa_iocpf_sm_fail_sync(struct bfa_iocpf *iocpf, enum iocpf_event event)
 {
-	switch (event) {
+	struct bfa_ioc *ioc = iocpf->ioc;
 
-	case IOC_E_ENABLE:
-		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+	switch (event) {
+	case IOCPF_E_SEMLOCKED:
+		iocpf->retry_count = 0;
+		bfa_ioc_sync_ack(ioc);
+		bfa_ioc_notify_fail(ioc);
+		if (!iocpf->auto_recover) {
+			bfa_ioc_sync_leave(ioc);
+			bfa_nw_ioc_hw_sem_release(ioc);
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail);
+		} else {
+			if (bfa_ioc_sync_complete(ioc))
+				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
+			else {
+				bfa_nw_ioc_hw_sem_release(ioc);
+				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_semwait);
+			}
+		}
 		break;
 
-	case IOC_E_DISABLE:
-		if (ioc->auto_recover)
-			bfa_ioc_timer_stop(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+	case IOCPF_E_DISABLE:
+		bfa_ioc_hw_sem_get_cancel(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
 		break;
 
-	case IOC_E_TIMEOUT:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_semwait);
+	case IOCPF_E_FAIL:
 		break;
 
-	case IOC_E_FWREADY:
-		/**
-		 * Recovery is already initiated by other function.
-		 */
-		break;
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
 
-	case IOC_E_HWERROR:
-		/*
-		 * HB failure notification, ignore.
-		 */
+static void
+bfa_iocpf_sm_fail_entry(struct bfa_iocpf *iocpf)
+{
+}
+
+/**
+ * @brief
+ * IOC is in failed state.
+ */
+static void
+bfa_iocpf_sm_fail(struct bfa_iocpf *iocpf, enum iocpf_event event)
+{
+	switch (event) {
+	case IOCPF_E_DISABLE:
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
 		break;
+
 	default:
-		bfa_sm_fault(ioc, event);
+		bfa_sm_fault(iocpf->ioc, event);
 	}
 }
 
@@ -678,14 +1139,6 @@ bfa_ioc_disable_comp(struct bfa_ioc *ioc)
 	}
 }
 
-void
-bfa_nw_ioc_sem_timeout(void *ioc_arg)
-{
-	struct bfa_ioc *ioc = (struct bfa_ioc *) ioc_arg;
-
-	bfa_ioc_hw_sem_get(ioc);
-}
-
 bool
 bfa_nw_ioc_sem_get(void __iomem *sem_reg)
 {
@@ -725,7 +1178,7 @@ bfa_ioc_hw_sem_get(struct bfa_ioc *ioc)
 	 */
 	r32 = readl(ioc->ioc_regs.ioc_sem_reg);
 	if (r32 == 0) {
-		bfa_fsm_send_event(ioc, IOC_E_SEMLOCKED);
+		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_SEMLOCKED);
 		return;
 	}
 
@@ -865,12 +1318,6 @@ bfa_ioc_fwver_valid(struct bfa_ioc *ioc)
 {
 	struct bfi_ioc_image_hdr fwhdr, *drv_fwhdr;
 
-	/**
-	 * If bios/efi boot (flash based) -- return true
-	 */
-	if (bfa_ioc_is_optrom(ioc))
-		return true;
-
 	bfa_nw_ioc_fwver_get(ioc, &fwhdr);
 	drv_fwhdr = (struct bfi_ioc_image_hdr *)
 		bfa_cb_image_get_chunk(BFA_IOC_FWIMG_TYPE(ioc), 0);
@@ -934,20 +1381,15 @@ bfa_ioc_hwinit(struct bfa_ioc *ioc, bool force)
 	/**
 	 * If IOC function is disabled and firmware version is same,
 	 * just re-enable IOC.
-	 *
-	 * If option rom, IOC must not be in operational state. With
-	 * convergence, IOC will be in operational state when 2nd driver
-	 * is loaded.
 	 */
-	if (ioc_fwstate == BFI_IOC_DISABLED ||
-	    (!bfa_ioc_is_optrom(ioc) && ioc_fwstate == BFI_IOC_OP)) {
+	if (ioc_fwstate == BFI_IOC_DISABLED || ioc_fwstate == BFI_IOC_OP) {
 		/**
 		 * When using MSI-X any pending firmware ready event should
 		 * be flushed. Otherwise MSI-X interrupts are not delivered.
 		 */
 		bfa_ioc_msgflush(ioc);
 		ioc->cbfn->reset_cbfn(ioc->bfa);
-		bfa_fsm_send_event(ioc, IOC_E_FWREADY);
+		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_FWREADY);
 		return;
 	}
 
@@ -1033,7 +1475,6 @@ bfa_nw_ioc_hb_check(void *cbarg)
 
 	hb_count = readl(ioc->ioc_regs.heartbeat);
 	if (ioc->hb_count == hb_count) {
-		pr_crit("Firmware heartbeat failure at %d", hb_count);
 		bfa_ioc_recover(ioc);
 		return;
 	} else {
@@ -1078,11 +1519,6 @@ bfa_ioc_download_fw(struct bfa_ioc *ioc, u32 boot_type,
 	 */
 	bfa_ioc_lmem_init(ioc);
 
-	/**
-	 * Flash based firmware boot
-	 */
-	if (bfa_ioc_is_optrom(ioc))
-		boot_type = BFI_BOOT_TYPE_FLASH;
 	fwimg = bfa_cb_image_get_chunk(BFA_IOC_FWIMG_TYPE(ioc), chunkno);
 
 	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
@@ -1209,6 +1645,55 @@ bfa_ioc_mbox_hbfail(struct bfa_ioc *ioc)
 		bfa_q_deq(&mod->cmd_q, &cmd);
 }
 
+static void
+bfa_ioc_fail_notify(struct bfa_ioc *ioc)
+{
+	struct list_head		*qe;
+	struct bfa_ioc_hbfail_notify	*notify;
+
+	/**
+	 * Notify driver and common modules registered for notification.
+	 */
+	ioc->cbfn->hbfail_cbfn(ioc->bfa);
+	list_for_each(qe, &ioc->hb_notify_q) {
+		notify = (struct bfa_ioc_hbfail_notify *) qe;
+		notify->cbfn(notify->cbarg);
+	}
+}
+
+static void
+bfa_ioc_pf_enabled(struct bfa_ioc *ioc)
+{
+	bfa_fsm_send_event(ioc, IOC_E_ENABLED);
+}
+
+static void
+bfa_ioc_pf_disabled(struct bfa_ioc *ioc)
+{
+	bfa_fsm_send_event(ioc, IOC_E_DISABLED);
+}
+
+static void
+bfa_ioc_pf_initfailed(struct bfa_ioc *ioc)
+{
+	bfa_fsm_send_event(ioc, IOC_E_INITFAILED);
+}
+
+static void
+bfa_ioc_pf_failed(struct bfa_ioc *ioc)
+{
+	bfa_fsm_send_event(ioc, IOC_E_PFAILED);
+}
+
+static void
+bfa_ioc_pf_fwmismatch(struct bfa_ioc *ioc)
+{
+	/**
+	 * Provide enable completion callback and AEN notification.
+	 */
+	ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+}
+
 /**
  * IOC public
  */
@@ -1304,6 +1789,7 @@ static void
 bfa_ioc_isr(struct bfa_ioc *ioc, struct bfi_mbmsg *m)
 {
 	union bfi_ioc_i2h_msg_u	*msg;
+	struct bfa_iocpf *iocpf = &ioc->iocpf;
 
 	msg = (union bfi_ioc_i2h_msg_u *) m;
 
@@ -1314,15 +1800,15 @@ bfa_ioc_isr(struct bfa_ioc *ioc, struct bfi_mbmsg *m)
 		break;
 
 	case BFI_IOC_I2H_READY_EVENT:
-		bfa_fsm_send_event(ioc, IOC_E_FWREADY);
+		bfa_fsm_send_event(iocpf, IOCPF_E_FWREADY);
 		break;
 
 	case BFI_IOC_I2H_ENABLE_REPLY:
-		bfa_fsm_send_event(ioc, IOC_E_FWRSP_ENABLE);
+		bfa_fsm_send_event(iocpf, IOCPF_E_FWRSP_ENABLE);
 		break;
 
 	case BFI_IOC_I2H_DISABLE_REPLY:
-		bfa_fsm_send_event(ioc, IOC_E_FWRSP_DISABLE);
+		bfa_fsm_send_event(iocpf, IOCPF_E_FWRSP_DISABLE);
 		break;
 
 	case BFI_IOC_I2H_GETATTR_REPLY:
@@ -1348,11 +1834,13 @@ bfa_nw_ioc_attach(struct bfa_ioc *ioc, void *bfa, struct bfa_ioc_cbfn *cbfn)
 	ioc->fcmode	= false;
 	ioc->pllinit	= false;
 	ioc->dbg_fwsave_once = true;
+	ioc->iocpf.ioc  = ioc;
 
 	bfa_ioc_mbox_attach(ioc);
 	INIT_LIST_HEAD(&ioc->hb_notify_q);
 
-	bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+	bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
+	bfa_fsm_send_event(ioc, IOC_E_RESET);
 }
 
 /**
@@ -1657,7 +2145,40 @@ bfa_ioc_get_adapter_model(struct bfa_ioc *ioc, char *model)
 static enum bfa_ioc_state
 bfa_ioc_get_state(struct bfa_ioc *ioc)
 {
-	return bfa_sm_to_state(ioc_sm_table, ioc->fsm);
+	enum bfa_iocpf_state iocpf_st;
+	enum bfa_ioc_state ioc_st = bfa_sm_to_state(ioc_sm_table, ioc->fsm);
+
+	if (ioc_st == BFA_IOC_ENABLING ||
+		ioc_st == BFA_IOC_FAIL || ioc_st == BFA_IOC_INITFAIL) {
+
+		iocpf_st = bfa_sm_to_state(iocpf_sm_table, ioc->iocpf.fsm);
+
+		switch (iocpf_st) {
+		case BFA_IOCPF_SEMWAIT:
+			ioc_st = BFA_IOC_SEMWAIT;
+			break;
+
+		case BFA_IOCPF_HWINIT:
+			ioc_st = BFA_IOC_HWINIT;
+			break;
+
+		case BFA_IOCPF_FWMISMATCH:
+			ioc_st = BFA_IOC_FWMISMATCH;
+			break;
+
+		case BFA_IOCPF_FAIL:
+			ioc_st = BFA_IOC_FAIL;
+			break;
+
+		case BFA_IOCPF_INITFAIL:
+			ioc_st = BFA_IOC_INITFAIL;
+			break;
+
+		default:
+			break;
+		}
+	}
+	return ioc_st;
 }
 
 void
@@ -1689,28 +2210,7 @@ bfa_ioc_get_pwwn(struct bfa_ioc *ioc)
 mac_t
 bfa_nw_ioc_get_mac(struct bfa_ioc *ioc)
 {
-	/*
-	 * Currently mfg mac is used as FCoE enode mac (not configured by PBC)
-	 */
-	if (bfa_ioc_get_type(ioc) == BFA_IOC_TYPE_FCoE)
-		return bfa_ioc_get_mfg_mac(ioc);
-	else
-		return ioc->attr->mac;
-}
-
-static mac_t
-bfa_ioc_get_mfg_mac(struct bfa_ioc *ioc)
-{
-	mac_t	m;
-
-	m = ioc->attr->mfg_mac;
-	if (bfa_mfg_is_old_wwn_mac_model(ioc->attr->card_type))
-		m.mac[MAC_ADDRLEN - 1] += bfa_ioc_pcifn(ioc);
-	else
-		bfa_mfg_increment_wwn_mac(&(m.mac[MAC_ADDRLEN-3]),
-			bfa_ioc_pcifn(ioc));
-
-	return m;
+	return ioc->attr->mac;
 }
 
 /**
@@ -1719,8 +2219,13 @@ bfa_ioc_get_mfg_mac(struct bfa_ioc *ioc)
 static void
 bfa_ioc_recover(struct bfa_ioc *ioc)
 {
-	bfa_ioc_stats(ioc, ioc_hbfails);
-	bfa_fsm_send_event(ioc, IOC_E_HBFAIL);
+	u16 bdf;
+
+	bdf = (ioc->pcidev.pci_slot << 8 | ioc->pcidev.pci_func << 3 |
+					ioc->pcidev.device_id);
+
+	pr_crit("Firmware heartbeat failure at %d", bdf);
+	BUG_ON(1);
 }
 
 static void
@@ -1728,5 +2233,61 @@ bfa_ioc_check_attr_wwns(struct bfa_ioc *ioc)
 {
 	if (bfa_ioc_get_type(ioc) == BFA_IOC_TYPE_LL)
 		return;
+}
+
+/**
+ * @dg hal_iocpf_pvt BFA IOC PF private functions
+ * @{
+ */
+
+static void
+bfa_iocpf_enable(struct bfa_ioc *ioc)
+{
+	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_ENABLE);
+}
+
+static void
+bfa_iocpf_disable(struct bfa_ioc *ioc)
+{
+	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_DISABLE);
+}
+
+static void
+bfa_iocpf_fail(struct bfa_ioc *ioc)
+{
+	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_FAIL);
+}
+
+static void
+bfa_iocpf_initfail(struct bfa_ioc *ioc)
+{
+	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_INITFAIL);
+}
+
+static void
+bfa_iocpf_getattrfail(struct bfa_ioc *ioc)
+{
+	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_GETATTRFAIL);
+}
+
+static void
+bfa_iocpf_stop(struct bfa_ioc *ioc)
+{
+	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_STOP);
+}
 
+void
+bfa_nw_iocpf_timeout(void *ioc_arg)
+{
+	struct bfa_ioc  *ioc = (struct bfa_ioc *) ioc_arg;
+
+	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_TIMEOUT);
+}
+
+void
+bfa_nw_iocpf_sem_timeout(void *ioc_arg)
+{
+	struct bfa_ioc  *ioc = (struct bfa_ioc *) ioc_arg;
+
+	bfa_ioc_hw_sem_get(ioc);
 }
diff --git a/drivers/net/bna/bfa_ioc.h b/drivers/net/bna/bfa_ioc.h
index a73d84ec808..e4974bc24ef 100644
--- a/drivers/net/bna/bfa_ioc.h
+++ b/drivers/net/bna/bfa_ioc.h
@@ -26,16 +26,7 @@
 #define BFA_IOC_TOV		3000	/* msecs */
 #define BFA_IOC_HWSEM_TOV	500	/* msecs */
 #define BFA_IOC_HB_TOV		500	/* msecs */
-#define BFA_IOC_HWINIT_MAX	2
-#define BFA_IOC_TOV_RECOVER	BFA_IOC_HB_TOV
-
-/**
- * Generic Scatter Gather Element used by driver
- */
-struct bfa_sge {
-	u32	sg_len;
-	void	*sg_addr;
-};
+#define BFA_IOC_HWINIT_MAX	5
 
 /**
  * PCI device information required by IOC
@@ -65,19 +56,6 @@ struct bfa_dma {
 #define BFI_SMEM_CT_SIZE	0x280000U	/* ! 2.5MB for catapult	*/
 
 /**
- * @brief BFA dma address assignment macro
- */
-#define bfa_dma_addr_set(dma_addr, pa)	\
-		__bfa_dma_addr_set(&dma_addr, (u64)pa)
-
-static inline void
-__bfa_dma_addr_set(union bfi_addr_u *dma_addr, u64 pa)
-{
-	dma_addr->a32.addr_lo = (u32) pa;
-	dma_addr->a32.addr_hi = (u32) (upper_32_bits(pa));
-}
-
-/**
  * @brief BFA dma address assignment macro. (big endian format)
  */
 #define bfa_dma_be_addr_set(dma_addr, pa)	\
@@ -105,8 +83,11 @@ struct bfa_ioc_regs {
 	void __iomem *host_page_num_fn;
 	void __iomem *heartbeat;
 	void __iomem *ioc_fwstate;
+	void __iomem *alt_ioc_fwstate;
 	void __iomem *ll_halt;
+	void __iomem *alt_ll_halt;
 	void __iomem *err_set;
+	void __iomem *ioc_fail_sync;
 	void __iomem *shirq_isr_next;
 	void __iomem *shirq_msk_next;
 	void __iomem *smem_page_start;
@@ -165,16 +146,22 @@ struct bfa_ioc_hbfail_notify {
 	(__notify)->cbarg = (__cbarg);				\
 } while (0)
 
+struct bfa_iocpf {
+	bfa_fsm_t		fsm;
+	struct bfa_ioc		*ioc;
+	u32			retry_count;
+	bool			auto_recover;
+};
+
 struct bfa_ioc {
 	bfa_fsm_t		fsm;
 	struct bfa 		*bfa;
 	struct bfa_pcidev 	pcidev;
-	struct bfa_timer_mod	*timer_mod;
 	struct timer_list 	ioc_timer;
+	struct timer_list 	iocpf_timer;
 	struct timer_list 	sem_timer;
 	struct timer_list	hb_timer;
 	u32			hb_count;
-	u32			retry_count;
 	struct list_head	hb_notify_q;
 	void			*dbg_fwsave;
 	int			dbg_fwsave_len;
@@ -182,7 +169,6 @@ struct bfa_ioc {
 	enum bfi_mclass		ioc_mc;
 	struct bfa_ioc_regs 	ioc_regs;
 	struct bfa_ioc_drv_stats stats;
-	bool			auto_recover;
 	bool			fcmode;
 	bool			ctdev;
 	bool			cna;
@@ -195,6 +181,7 @@ struct bfa_ioc {
 	struct bfa_ioc_cbfn	*cbfn;
 	struct bfa_ioc_mbox_mod	mbox_mod;
 	struct bfa_ioc_hwif	*ioc_hwif;
+	struct bfa_iocpf	iocpf;
 };
 
 struct bfa_ioc_hwif {
@@ -205,8 +192,12 @@ struct bfa_ioc_hwif {
 	void		(*ioc_map_port)	(struct bfa_ioc *ioc);
 	void		(*ioc_isr_mode_set)	(struct bfa_ioc *ioc,
 					bool msix);
-	void		(*ioc_notify_hbfail)	(struct bfa_ioc *ioc);
+	void		(*ioc_notify_fail)	(struct bfa_ioc *ioc);
 	void		(*ioc_ownership_reset)	(struct bfa_ioc *ioc);
+	void		(*ioc_sync_join)	(struct bfa_ioc *ioc);
+	void		(*ioc_sync_leave)	(struct bfa_ioc *ioc);
+	void		(*ioc_sync_ack)		(struct bfa_ioc *ioc);
+	bool		(*ioc_sync_complete)	(struct bfa_ioc *ioc);
 };
 
 #define bfa_ioc_pcifn(__ioc)		((__ioc)->pcidev.pci_func)
@@ -271,7 +262,6 @@ void bfa_nw_ioc_enable(struct bfa_ioc *ioc);
 void bfa_nw_ioc_disable(struct bfa_ioc *ioc);
 
 void bfa_nw_ioc_error_isr(struct bfa_ioc *ioc);
-
 void bfa_nw_ioc_get_attr(struct bfa_ioc *ioc, struct bfa_ioc_attr *ioc_attr);
 void bfa_nw_ioc_hbfail_register(struct bfa_ioc *ioc,
 	struct bfa_ioc_hbfail_notify *notify);
@@ -289,7 +279,8 @@ mac_t bfa_nw_ioc_get_mac(struct bfa_ioc *ioc);
  */
 void bfa_nw_ioc_timeout(void *ioc);
 void bfa_nw_ioc_hb_check(void *ioc);
-void bfa_nw_ioc_sem_timeout(void *ioc);
+void bfa_nw_iocpf_timeout(void *ioc);
+void bfa_nw_iocpf_sem_timeout(void *ioc);
 
 /*
  * F/W Image Size & Chunk
diff --git a/drivers/net/bna/bfa_ioc_ct.c b/drivers/net/bna/bfa_ioc_ct.c
index 121cfd6d48b..469997c4ffd 100644
--- a/drivers/net/bna/bfa_ioc_ct.c
+++ b/drivers/net/bna/bfa_ioc_ct.c
@@ -22,6 +22,15 @@
 #include "bfi_ctreg.h"
 #include "bfa_defs.h"
 
+#define bfa_ioc_ct_sync_pos(__ioc)	\
+		((u32) (1 << bfa_ioc_pcifn(__ioc)))
+#define BFA_IOC_SYNC_REQD_SH		16
+#define bfa_ioc_ct_get_sync_ackd(__val) (__val & 0x0000ffff)
+#define bfa_ioc_ct_clear_sync_ackd(__val) (__val & 0xffff0000)
+#define bfa_ioc_ct_get_sync_reqd(__val) (__val >> BFA_IOC_SYNC_REQD_SH)
+#define bfa_ioc_ct_sync_reqd_pos(__ioc) \
+		(bfa_ioc_ct_sync_pos(__ioc) << BFA_IOC_SYNC_REQD_SH)
+
 /*
  * forward declarations
  */
@@ -30,8 +39,12 @@ static void bfa_ioc_ct_firmware_unlock(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_reg_init(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_map_port(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_isr_mode_set(struct bfa_ioc *ioc, bool msix);
-static void bfa_ioc_ct_notify_hbfail(struct bfa_ioc *ioc);
+static void bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc);
 static void bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc);
+static void bfa_ioc_ct_sync_join(struct bfa_ioc *ioc);
+static void bfa_ioc_ct_sync_leave(struct bfa_ioc *ioc);
+static void bfa_ioc_ct_sync_ack(struct bfa_ioc *ioc);
+static bool bfa_ioc_ct_sync_complete(struct bfa_ioc *ioc);
 static enum bfa_status bfa_ioc_ct_pll_init(void __iomem *rb, bool fcmode);
 
 static struct bfa_ioc_hwif nw_hwif_ct;
@@ -48,8 +61,12 @@ bfa_nw_ioc_set_ct_hwif(struct bfa_ioc *ioc)
 	nw_hwif_ct.ioc_reg_init = bfa_ioc_ct_reg_init;
 	nw_hwif_ct.ioc_map_port = bfa_ioc_ct_map_port;
 	nw_hwif_ct.ioc_isr_mode_set = bfa_ioc_ct_isr_mode_set;
-	nw_hwif_ct.ioc_notify_hbfail = bfa_ioc_ct_notify_hbfail;
+	nw_hwif_ct.ioc_notify_fail = bfa_ioc_ct_notify_fail;
 	nw_hwif_ct.ioc_ownership_reset = bfa_ioc_ct_ownership_reset;
+	nw_hwif_ct.ioc_sync_join = bfa_ioc_ct_sync_join;
+	nw_hwif_ct.ioc_sync_leave = bfa_ioc_ct_sync_leave;
+	nw_hwif_ct.ioc_sync_ack = bfa_ioc_ct_sync_ack;
+	nw_hwif_ct.ioc_sync_complete = bfa_ioc_ct_sync_complete;
 
 	ioc->ioc_hwif = &nw_hwif_ct;
 }
@@ -86,6 +103,7 @@ bfa_ioc_ct_firmware_lock(struct bfa_ioc *ioc)
 	if (usecnt == 0) {
 		writel(1, ioc->ioc_regs.ioc_usage_reg);
 		bfa_nw_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+		writel(0, ioc->ioc_regs.ioc_fail_sync);
 		return true;
 	}
 
@@ -149,12 +167,14 @@ bfa_ioc_ct_firmware_unlock(struct bfa_ioc *ioc)
  * Notify other functions on HB failure.
  */
 static void
-bfa_ioc_ct_notify_hbfail(struct bfa_ioc *ioc)
+bfa_ioc_ct_notify_fail(struct bfa_ioc *ioc)
 {
 	if (ioc->cna) {
 		writel(__FW_INIT_HALT_P, ioc->ioc_regs.ll_halt);
+		writel(__FW_INIT_HALT_P, ioc->ioc_regs.alt_ll_halt);
 		/* Wait for halt to take effect */
 		readl(ioc->ioc_regs.ll_halt);
+		readl(ioc->ioc_regs.alt_ll_halt);
 	} else {
 		writel(__PSS_ERR_STATUS_SET, ioc->ioc_regs.err_set);
 		readl(ioc->ioc_regs.err_set);
@@ -206,15 +226,19 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
 	if (ioc->port_id == 0) {
 		ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
 		ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
+		ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC1_STATE_REG;
 		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].hfn;
 		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].lpu;
 		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
+		ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1;
 	} else {
 		ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
 		ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
+		ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC0_STATE_REG;
 		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].hfn;
 		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].lpu;
 		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
+		ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0;
 	}
 
 	/*
@@ -232,6 +256,7 @@ bfa_ioc_ct_reg_init(struct bfa_ioc *ioc)
 	ioc->ioc_regs.ioc_usage_sem_reg = (rb + HOST_SEM1_REG);
 	ioc->ioc_regs.ioc_init_sem_reg = (rb + HOST_SEM2_REG);
 	ioc->ioc_regs.ioc_usage_reg = (rb + BFA_FW_USE_COUNT);
+	ioc->ioc_regs.ioc_fail_sync = (rb + BFA_IOC_FAIL_SYNC);
 
 	/**
 	 * sram memory access
@@ -317,6 +342,77 @@ bfa_ioc_ct_ownership_reset(struct bfa_ioc *ioc)
 	bfa_nw_ioc_hw_sem_release(ioc);
 }
 
+/**
+ * Synchronized IOC failure processing routines
+ */
+static void
+bfa_ioc_ct_sync_join(struct bfa_ioc *ioc)
+{
+	u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
+	u32 sync_pos = bfa_ioc_ct_sync_reqd_pos(ioc);
+
+	writel((r32 | sync_pos), ioc->ioc_regs.ioc_fail_sync);
+}
+
+static void
+bfa_ioc_ct_sync_leave(struct bfa_ioc *ioc)
+{
+	u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
+	u32 sync_msk = bfa_ioc_ct_sync_reqd_pos(ioc) |
+					bfa_ioc_ct_sync_pos(ioc);
+
+	writel((r32 & ~sync_msk), ioc->ioc_regs.ioc_fail_sync);
+}
+
+static void
+bfa_ioc_ct_sync_ack(struct bfa_ioc *ioc)
+{
+	u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
+
+	writel((r32 | bfa_ioc_ct_sync_pos(ioc)), ioc->ioc_regs.ioc_fail_sync);
+}
+
+static bool
+bfa_ioc_ct_sync_complete(struct bfa_ioc *ioc)
+{
+	u32 r32 = readl(ioc->ioc_regs.ioc_fail_sync);
+	u32 sync_reqd = bfa_ioc_ct_get_sync_reqd(r32);
+	u32 sync_ackd = bfa_ioc_ct_get_sync_ackd(r32);
+	u32 tmp_ackd;
+
+	if (sync_ackd == 0)
+		return true;
+
+	/**
+	 * The check below is to see whether any other PCI fn
+	 * has reinitialized the ASIC (reset sync_ackd bits)
+	 * and failed again while this IOC was waiting for hw
+	 * semaphore (in bfa_iocpf_sm_semwait()).
+	 */
+	tmp_ackd = sync_ackd;
+	if ((sync_reqd &  bfa_ioc_ct_sync_pos(ioc)) &&
+			!(sync_ackd & bfa_ioc_ct_sync_pos(ioc)))
+		sync_ackd |= bfa_ioc_ct_sync_pos(ioc);
+
+	if (sync_reqd == sync_ackd) {
+		writel(bfa_ioc_ct_clear_sync_ackd(r32),
+				ioc->ioc_regs.ioc_fail_sync);
+		writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate);
+		writel(BFI_IOC_FAIL, ioc->ioc_regs.alt_ioc_fwstate);
+		return true;
+	}
+
+	/**
+	 * If another PCI fn reinitialized and failed again while
+	 * this IOC was waiting for hw sem, the sync_ackd bit for
+	 * this IOC need to be set again to allow reinitialization.
+	 */
+	if (tmp_ackd != sync_ackd)
+		writel((r32 | sync_ackd), ioc->ioc_regs.ioc_fail_sync);
+
+	return false;
+}
+
 static enum bfa_status
 bfa_ioc_ct_pll_init(void __iomem *rb, bool fcmode)
 {
diff --git a/drivers/net/bna/bfi_ctreg.h b/drivers/net/bna/bfi_ctreg.h
index 404ea351d4a..5130d791866 100644
--- a/drivers/net/bna/bfi_ctreg.h
+++ b/drivers/net/bna/bfi_ctreg.h
@@ -535,6 +535,7 @@ enum {
 #define BFA_IOC1_HBEAT_REG		HOST_SEM2_INFO_REG
 #define BFA_IOC1_STATE_REG		HOST_SEM3_INFO_REG
 #define BFA_FW_USE_COUNT		 HOST_SEM4_INFO_REG
+#define BFA_IOC_FAIL_SYNC		HOST_SEM5_INFO_REG
 
 #define CPE_DEPTH_Q(__n) \
 	(CPE_DEPTH_Q0 + (__n) * (CPE_DEPTH_Q1 - CPE_DEPTH_Q0))
@@ -552,22 +553,30 @@ enum {
 	(RME_PI_PTR_Q0 + (__n) * (RME_PI_PTR_Q1 - RME_PI_PTR_Q0))
 #define RME_CI_PTR_Q(__n) \
 	(RME_CI_PTR_Q0 + (__n) * (RME_CI_PTR_Q1 - RME_CI_PTR_Q0))
-#define HQM_QSET_RXQ_DRBL_P0(__n) (HQM_QSET0_RXQ_DRBL_P0 + (__n) \
-	* (HQM_QSET1_RXQ_DRBL_P0 - HQM_QSET0_RXQ_DRBL_P0))
-#define HQM_QSET_TXQ_DRBL_P0(__n) (HQM_QSET0_TXQ_DRBL_P0 + (__n) \
-	* (HQM_QSET1_TXQ_DRBL_P0 - HQM_QSET0_TXQ_DRBL_P0))
-#define HQM_QSET_IB_DRBL_1_P0(__n) (HQM_QSET0_IB_DRBL_1_P0 + (__n) \
-	* (HQM_QSET1_IB_DRBL_1_P0 - HQM_QSET0_IB_DRBL_1_P0))
-#define HQM_QSET_IB_DRBL_2_P0(__n) (HQM_QSET0_IB_DRBL_2_P0 + (__n) \
-	* (HQM_QSET1_IB_DRBL_2_P0 - HQM_QSET0_IB_DRBL_2_P0))
-#define HQM_QSET_RXQ_DRBL_P1(__n) (HQM_QSET0_RXQ_DRBL_P1 + (__n) \
-	* (HQM_QSET1_RXQ_DRBL_P1 - HQM_QSET0_RXQ_DRBL_P1))
-#define HQM_QSET_TXQ_DRBL_P1(__n) (HQM_QSET0_TXQ_DRBL_P1 + (__n) \
-	* (HQM_QSET1_TXQ_DRBL_P1 - HQM_QSET0_TXQ_DRBL_P1))
-#define HQM_QSET_IB_DRBL_1_P1(__n) (HQM_QSET0_IB_DRBL_1_P1 + (__n) \
-	* (HQM_QSET1_IB_DRBL_1_P1 - HQM_QSET0_IB_DRBL_1_P1))
-#define HQM_QSET_IB_DRBL_2_P1(__n) (HQM_QSET0_IB_DRBL_2_P1 + (__n) \
-	* (HQM_QSET1_IB_DRBL_2_P1 - HQM_QSET0_IB_DRBL_2_P1))
+#define HQM_QSET_RXQ_DRBL_P0(__n) \
+	(HQM_QSET0_RXQ_DRBL_P0 + (__n) * \
+		(HQM_QSET1_RXQ_DRBL_P0 - HQM_QSET0_RXQ_DRBL_P0))
+#define HQM_QSET_TXQ_DRBL_P0(__n) \
+	(HQM_QSET0_TXQ_DRBL_P0 + (__n) * \
+		(HQM_QSET1_TXQ_DRBL_P0 - HQM_QSET0_TXQ_DRBL_P0))
+#define HQM_QSET_IB_DRBL_1_P0(__n) \
+	(HQM_QSET0_IB_DRBL_1_P0 + (__n) * \
+		(HQM_QSET1_IB_DRBL_1_P0 - HQM_QSET0_IB_DRBL_1_P0))
+#define HQM_QSET_IB_DRBL_2_P0(__n) \
+	(HQM_QSET0_IB_DRBL_2_P0 + (__n) * \
+		(HQM_QSET1_IB_DRBL_2_P0 - HQM_QSET0_IB_DRBL_2_P0))
+#define HQM_QSET_RXQ_DRBL_P1(__n) \
+	(HQM_QSET0_RXQ_DRBL_P1 + (__n) * \
+		(HQM_QSET1_RXQ_DRBL_P1 - HQM_QSET0_RXQ_DRBL_P1))
+#define HQM_QSET_TXQ_DRBL_P1(__n) \
+	(HQM_QSET0_TXQ_DRBL_P1 + (__n) * \
+		(HQM_QSET1_TXQ_DRBL_P1 - HQM_QSET0_TXQ_DRBL_P1))
+#define HQM_QSET_IB_DRBL_1_P1(__n) \
+	(HQM_QSET0_IB_DRBL_1_P1 + (__n) * \
+		(HQM_QSET1_IB_DRBL_1_P1 - HQM_QSET0_IB_DRBL_1_P1))
+#define HQM_QSET_IB_DRBL_2_P1(__n) \
+	(HQM_QSET0_IB_DRBL_2_P1 + (__n) * \
+		(HQM_QSET1_IB_DRBL_2_P1 - HQM_QSET0_IB_DRBL_2_P1))
 
 #define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
 #define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
diff --git a/drivers/net/bna/bna.h b/drivers/net/bna/bna.h
index df6676bbc84..a287f89b028 100644
--- a/drivers/net/bna/bna.h
+++ b/drivers/net/bna/bna.h
@@ -32,8 +32,6 @@ extern const u32 bna_napi_dim_vector[][BNA_BIAS_T_MAX];
 /* Log string size */
 #define BNA_MESSAGE_SIZE		256
 
-#define bna_device_timer(_dev)		bfa_timer_beat(&((_dev)->timer_mod))
-
 /* MBOX API for PORT, TX, RX */
 #define bna_mbox_qe_fill(_qe, _cmd, _cmd_len, _cbfn, _cbarg)		\
 do {									\
@@ -390,8 +388,8 @@ void bna_mbox_send(struct bna *bna, struct bna_mbox_qe *mbox_qe);
 
 /* API for RX */
 int bna_port_mtu_get(struct bna_port *port);
-void bna_llport_admin_up(struct bna_llport *llport);
-void bna_llport_admin_down(struct bna_llport *llport);
+void bna_llport_rx_started(struct bna_llport *llport);
+void bna_llport_rx_stopped(struct bna_llport *llport);
 
 /* API for BNAD */
 void bna_port_enable(struct bna_port *port);
diff --git a/drivers/net/bna/bna_ctrl.c b/drivers/net/bna/bna_ctrl.c
index 07b26598546..e1527472b96 100644
--- a/drivers/net/bna/bna_ctrl.c
+++ b/drivers/net/bna/bna_ctrl.c
@@ -59,14 +59,70 @@ bna_port_cb_link_down(struct bna_port *port, int status)
 	port->link_cbfn(port->bna->bnad, BNA_LINK_DOWN);
 }
 
+static inline int
+llport_can_be_up(struct bna_llport *llport)
+{
+	int ready = 0;
+	if (llport->type == BNA_PORT_T_REGULAR)
+		ready = ((llport->flags & BNA_LLPORT_F_ADMIN_UP) &&
+			 (llport->flags & BNA_LLPORT_F_RX_STARTED) &&
+			 (llport->flags & BNA_LLPORT_F_PORT_ENABLED));
+	else
+		ready = ((llport->flags & BNA_LLPORT_F_ADMIN_UP) &&
+			 (llport->flags & BNA_LLPORT_F_RX_STARTED) &&
+			 !(llport->flags & BNA_LLPORT_F_PORT_ENABLED));
+	return ready;
+}
+
+#define llport_is_up llport_can_be_up
+
+enum bna_llport_event {
+	LLPORT_E_START			= 1,
+	LLPORT_E_STOP			= 2,
+	LLPORT_E_FAIL			= 3,
+	LLPORT_E_UP			= 4,
+	LLPORT_E_DOWN			= 5,
+	LLPORT_E_FWRESP_UP_OK		= 6,
+	LLPORT_E_FWRESP_UP_FAIL		= 7,
+	LLPORT_E_FWRESP_DOWN		= 8
+};
+
+static void
+bna_llport_cb_port_enabled(struct bna_llport *llport)
+{
+	llport->flags |= BNA_LLPORT_F_PORT_ENABLED;
+
+	if (llport_can_be_up(llport))
+		bfa_fsm_send_event(llport, LLPORT_E_UP);
+}
+
+static void
+bna_llport_cb_port_disabled(struct bna_llport *llport)
+{
+	int llport_up = llport_is_up(llport);
+
+	llport->flags &= ~BNA_LLPORT_F_PORT_ENABLED;
+
+	if (llport_up)
+		bfa_fsm_send_event(llport, LLPORT_E_DOWN);
+}
+
 /**
  * MBOX
  */
 static int
 bna_is_aen(u8 msg_id)
 {
-	return msg_id == BFI_LL_I2H_LINK_DOWN_AEN ||
-	       msg_id == BFI_LL_I2H_LINK_UP_AEN;
+	switch (msg_id) {
+	case BFI_LL_I2H_LINK_DOWN_AEN:
+	case BFI_LL_I2H_LINK_UP_AEN:
+	case BFI_LL_I2H_PORT_ENABLE_AEN:
+	case BFI_LL_I2H_PORT_DISABLE_AEN:
+		return 1;
+
+	default:
+		return 0;
+	}
 }
 
 static void
@@ -81,6 +137,12 @@ bna_mbox_aen_callback(struct bna *bna, struct bfi_mbmsg *msg)
 	case BFI_LL_I2H_LINK_DOWN_AEN:
 		bna_port_cb_link_down(&bna->port, aen->reason);
 		break;
+	case BFI_LL_I2H_PORT_ENABLE_AEN:
+		bna_llport_cb_port_enabled(&bna->port.llport);
+		break;
+	case BFI_LL_I2H_PORT_DISABLE_AEN:
+		bna_llport_cb_port_disabled(&bna->port.llport);
+		break;
 	default:
 		break;
 	}
@@ -251,16 +313,6 @@ static void bna_llport_start(struct bna_llport *llport);
 static void bna_llport_stop(struct bna_llport *llport);
 static void bna_llport_fail(struct bna_llport *llport);
 
-enum bna_llport_event {
-	LLPORT_E_START			= 1,
-	LLPORT_E_STOP			= 2,
-	LLPORT_E_FAIL			= 3,
-	LLPORT_E_UP			= 4,
-	LLPORT_E_DOWN			= 5,
-	LLPORT_E_FWRESP_UP		= 6,
-	LLPORT_E_FWRESP_DOWN		= 7
-};
-
 enum bna_llport_state {
 	BNA_LLPORT_STOPPED		= 1,
 	BNA_LLPORT_DOWN			= 2,
@@ -320,7 +372,7 @@ bna_llport_sm_stopped(struct bna_llport *llport,
 		/* No-op */
 		break;
 
-	case LLPORT_E_FWRESP_UP:
+	case LLPORT_E_FWRESP_UP_OK:
 	case LLPORT_E_FWRESP_DOWN:
 		/**
 		 * These events are received due to flushing of mbox when
@@ -366,6 +418,7 @@ bna_llport_sm_down(struct bna_llport *llport,
 static void
 bna_llport_sm_up_resp_wait_entry(struct bna_llport *llport)
 {
+	BUG_ON(!llport_can_be_up(llport));
 	/**
 	 * NOTE: Do not call bna_fw_llport_up() here. That will over step
 	 * mbox due to down_resp_wait -> up_resp_wait transition on event
@@ -390,10 +443,14 @@ bna_llport_sm_up_resp_wait(struct bna_llport *llport,
 		bfa_fsm_set_state(llport, bna_llport_sm_down_resp_wait);
 		break;
 
-	case LLPORT_E_FWRESP_UP:
+	case LLPORT_E_FWRESP_UP_OK:
 		bfa_fsm_set_state(llport, bna_llport_sm_up);
 		break;
 
+	case LLPORT_E_FWRESP_UP_FAIL:
+		bfa_fsm_set_state(llport, bna_llport_sm_down);
+		break;
+
 	case LLPORT_E_FWRESP_DOWN:
 		/* down_resp_wait -> up_resp_wait transition on LLPORT_E_UP */
 		bna_fw_llport_up(llport);
@@ -431,11 +488,12 @@ bna_llport_sm_down_resp_wait(struct bna_llport *llport,
 		bfa_fsm_set_state(llport, bna_llport_sm_up_resp_wait);
 		break;
 
-	case LLPORT_E_FWRESP_UP:
+	case LLPORT_E_FWRESP_UP_OK:
 		/* up_resp_wait->down_resp_wait transition on LLPORT_E_DOWN */
 		bna_fw_llport_down(llport);
 		break;
 
+	case LLPORT_E_FWRESP_UP_FAIL:
 	case LLPORT_E_FWRESP_DOWN:
 		bfa_fsm_set_state(llport, bna_llport_sm_down);
 		break;
@@ -496,11 +554,12 @@ bna_llport_sm_last_resp_wait(struct bna_llport *llport,
 		/* No-op */
 		break;
 
-	case LLPORT_E_FWRESP_UP:
+	case LLPORT_E_FWRESP_UP_OK:
 		/* up_resp_wait->last_resp_wait transition on LLPORT_T_STOP */
 		bna_fw_llport_down(llport);
 		break;
 
+	case LLPORT_E_FWRESP_UP_FAIL:
 	case LLPORT_E_FWRESP_DOWN:
 		bfa_fsm_set_state(llport, bna_llport_sm_stopped);
 		break;
@@ -541,7 +600,14 @@ bna_fw_cb_llport_up(void *arg, int status)
 	struct bna_llport *llport = (struct bna_llport *)arg;
 
 	bfa_q_qe_init(&llport->mbox_qe.qe);
-	bfa_fsm_send_event(llport, LLPORT_E_FWRESP_UP);
+	if (status == BFI_LL_CMD_FAIL) {
+		if (llport->type == BNA_PORT_T_REGULAR)
+			llport->flags &= ~BNA_LLPORT_F_PORT_ENABLED;
+		else
+			llport->flags &= ~BNA_LLPORT_F_ADMIN_UP;
+		bfa_fsm_send_event(llport, LLPORT_E_FWRESP_UP_FAIL);
+	} else
+		bfa_fsm_send_event(llport, LLPORT_E_FWRESP_UP_OK);
 }
 
 static void
@@ -588,13 +654,14 @@ bna_port_cb_llport_stopped(struct bna_port *port,
 static void
 bna_llport_init(struct bna_llport *llport, struct bna *bna)
 {
-	llport->flags |= BNA_LLPORT_F_ENABLED;
+	llport->flags |= BNA_LLPORT_F_ADMIN_UP;
+	llport->flags |= BNA_LLPORT_F_PORT_ENABLED;
 	llport->type = BNA_PORT_T_REGULAR;
 	llport->bna = bna;
 
 	llport->link_status = BNA_LINK_DOWN;
 
-	llport->admin_up_count = 0;
+	llport->rx_started_count = 0;
 
 	llport->stop_cbfn = NULL;
 
@@ -606,7 +673,8 @@ bna_llport_init(struct bna_llport *llport, struct bna *bna)
 static void
 bna_llport_uninit(struct bna_llport *llport)
 {
-	llport->flags &= ~BNA_LLPORT_F_ENABLED;
+	llport->flags &= ~BNA_LLPORT_F_ADMIN_UP;
+	llport->flags &= ~BNA_LLPORT_F_PORT_ENABLED;
 
 	llport->bna = NULL;
 }
@@ -628,6 +696,8 @@ bna_llport_stop(struct bna_llport *llport)
 static void
 bna_llport_fail(struct bna_llport *llport)
 {
+	/* Reset the physical port status to enabled */
+	llport->flags |= BNA_LLPORT_F_PORT_ENABLED;
 	bfa_fsm_send_event(llport, LLPORT_E_FAIL);
 }
 
@@ -638,25 +708,31 @@ bna_llport_state_get(struct bna_llport *llport)
 }
 
 void
-bna_llport_admin_up(struct bna_llport *llport)
+bna_llport_rx_started(struct bna_llport *llport)
 {
-	llport->admin_up_count++;
+	llport->rx_started_count++;
 
-	if (llport->admin_up_count == 1) {
-		llport->flags |= BNA_LLPORT_F_RX_ENABLED;
-		if (llport->flags & BNA_LLPORT_F_ENABLED)
+	if (llport->rx_started_count == 1) {
+
+		llport->flags |= BNA_LLPORT_F_RX_STARTED;
+
+		if (llport_can_be_up(llport))
 			bfa_fsm_send_event(llport, LLPORT_E_UP);
 	}
 }
 
 void
-bna_llport_admin_down(struct bna_llport *llport)
+bna_llport_rx_stopped(struct bna_llport *llport)
 {
-	llport->admin_up_count--;
+	int llport_up = llport_is_up(llport);
+
+	llport->rx_started_count--;
 
-	if (llport->admin_up_count == 0) {
-		llport->flags &= ~BNA_LLPORT_F_RX_ENABLED;
-		if (llport->flags & BNA_LLPORT_F_ENABLED)
+	if (llport->rx_started_count == 0) {
+
+		llport->flags &= ~BNA_LLPORT_F_RX_STARTED;
+
+		if (llport_up)
 			bfa_fsm_send_event(llport, LLPORT_E_DOWN);
 	}
 }
@@ -2056,37 +2132,6 @@ rxf_fltr_mbox_cmd(struct bna_rxf *rxf, u8 cmd, enum bna_status status)
 	bna_mbox_send(rxf->rx->bna, &rxf->mbox_qe);
 }
 
-static void
-__rxf_default_function_config(struct bna_rxf *rxf, enum bna_status status)
-{
-	struct bna_rx_fndb_ram *rx_fndb_ram;
-	u32 ctrl_flags;
-	int i;
-
-	rx_fndb_ram = (struct bna_rx_fndb_ram *)
-			BNA_GET_MEM_BASE_ADDR(rxf->rx->bna->pcidev.pci_bar_kva,
-			RX_FNDB_RAM_BASE_OFFSET);
-
-	for (i = 0; i < BFI_MAX_RXF; i++) {
-		if (status == BNA_STATUS_T_ENABLED) {
-			if (i == rxf->rxf_id)
-				continue;
-
-			ctrl_flags =
-				readl(&rx_fndb_ram[i].control_flags);
-			ctrl_flags |= BNA_RXF_CF_DEFAULT_FUNCTION_ENABLE;
-			writel(ctrl_flags,
-						&rx_fndb_ram[i].control_flags);
-		} else {
-			ctrl_flags =
-				readl(&rx_fndb_ram[i].control_flags);
-			ctrl_flags &= ~BNA_RXF_CF_DEFAULT_FUNCTION_ENABLE;
-			writel(ctrl_flags,
-						&rx_fndb_ram[i].control_flags);
-		}
-	}
-}
-
 int
 rxf_process_packet_filter_ucast(struct bna_rxf *rxf)
 {
@@ -2153,46 +2198,6 @@ rxf_process_packet_filter_promisc(struct bna_rxf *rxf)
 }
 
 int
-rxf_process_packet_filter_default(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-
-	/* Enable/disable default mode */
-	if (is_default_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move default configuration from pending -> active */
-		default_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active |= BNA_RXMODE_DEFAULT;
-
-		/* Disable VLAN filter to allow all VLANs */
-		__rxf_vlan_filter_set(rxf, BNA_STATUS_T_DISABLED);
-		/* Redirect all other RxF vlan filtering to this one */
-		__rxf_default_function_config(rxf, BNA_STATUS_T_ENABLED);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_DEFAULT_SET_REQ,
-				BNA_STATUS_T_ENABLED);
-		return 1;
-	} else if (is_default_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move default configuration from pending -> active */
-		default_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_DEFAULT;
-		bna->rxf_default_id = BFI_MAX_RXF;
-
-		/* Revert VLAN filter */
-		__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
-		/* Stop RxF vlan filter table redirection */
-		__rxf_default_function_config(rxf, BNA_STATUS_T_DISABLED);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_DEFAULT_SET_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
 rxf_process_packet_filter_allmulti(struct bna_rxf *rxf)
 {
 	/* Enable/disable allmulti mode */
@@ -2289,48 +2294,6 @@ rxf_clear_packet_filter_promisc(struct bna_rxf *rxf)
 }
 
 int
-rxf_clear_packet_filter_default(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-
-	/* 8. Execute pending default mode disable command */
-	if (is_default_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* move default configuration from pending -> active */
-		default_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_DEFAULT;
-		bna->rxf_default_id = BFI_MAX_RXF;
-
-		/* Revert VLAN filter */
-		__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
-		/* Stop RxF vlan filter table redirection */
-		__rxf_default_function_config(rxf, BNA_STATUS_T_DISABLED);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_DEFAULT_SET_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	/* 9. Clear active default mode; move it to pending enable */
-	if (rxf->rxmode_active & BNA_RXMODE_DEFAULT) {
-		/* move default configuration from active -> pending */
-		default_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_DEFAULT;
-
-		/* Revert VLAN filter */
-		__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
-		/* Stop RxF vlan filter table redirection */
-		__rxf_default_function_config(rxf, BNA_STATUS_T_DISABLED);
-		rxf_fltr_mbox_cmd(rxf, BFI_LL_H2I_RXF_DEFAULT_SET_REQ,
-				BNA_STATUS_T_DISABLED);
-		return 1;
-	}
-
-	return 0;
-}
-
-int
 rxf_clear_packet_filter_allmulti(struct bna_rxf *rxf)
 {
 	/* 10. Execute pending allmulti mode disable command */
@@ -2405,28 +2368,6 @@ rxf_reset_packet_filter_promisc(struct bna_rxf *rxf)
 }
 
 void
-rxf_reset_packet_filter_default(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-
-	/* 8. Clear pending default mode disable */
-	if (is_default_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		default_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_DEFAULT;
-		bna->rxf_default_id = BFI_MAX_RXF;
-	}
-
-	/* 9. Move default mode config from active -> pending */
-	if (rxf->rxmode_active & BNA_RXMODE_DEFAULT) {
-		default_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		rxf->rxmode_active &= ~BNA_RXMODE_DEFAULT;
-	}
-}
-
-void
 rxf_reset_packet_filter_allmulti(struct bna_rxf *rxf)
 {
 	/* 10. Clear pending allmulti mode disable */
@@ -2523,76 +2464,6 @@ rxf_promisc_disable(struct bna_rxf *rxf)
  *	1 = need h/w change
  */
 static int
-rxf_default_enable(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-	int ret = 0;
-
-	/* There can not be any pending disable command */
-
-	/* Do nothing if pending enable or already enabled */
-	if (is_default_enable(rxf->rxmode_pending,
-		rxf->rxmode_pending_bitmask) ||
-		(rxf->rxmode_active & BNA_RXMODE_DEFAULT)) {
-		/* Schedule enable */
-	} else {
-		/* Default mode should not be active in the system */
-		default_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		bna->rxf_default_id = rxf->rxf_id;
-		ret = 1;
-	}
-
-	return ret;
-}
-
-/**
- * Should only be called by bna_rxf_mode_set.
- * Helps deciding if h/w configuration is needed or not.
- *  Returns:
- *	0 = no h/w change
- *	1 = need h/w change
- */
-static int
-rxf_default_disable(struct bna_rxf *rxf)
-{
-	struct bna *bna = rxf->rx->bna;
-	int ret = 0;
-
-	/* There can not be any pending disable */
-
-	/* Turn off pending enable command , if any */
-	if (is_default_enable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask)) {
-		/* Promisc mode should not be active */
-		/* system default state should be pending */
-		default_inactive(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		/* Remove the default state from the system */
-		bna->rxf_default_id = BFI_MAX_RXF;
-
-	/* Schedule disable */
-	} else if (rxf->rxmode_active & BNA_RXMODE_DEFAULT) {
-		/* Default mode should be active in the system */
-		default_disable(rxf->rxmode_pending,
-				rxf->rxmode_pending_bitmask);
-		ret = 1;
-
-	/* Do nothing if already disabled */
-	} else {
-	}
-
-	return ret;
-}
-
-/**
- * Should only be called by bna_rxf_mode_set.
- * Helps deciding if h/w configuration is needed or not.
- *  Returns:
- *	0 = no h/w change
- *	1 = need h/w change
- */
-static int
 rxf_allmulti_enable(struct bna_rxf *rxf)
 {
 	int ret = 0;
@@ -2654,38 +2525,13 @@ bna_rx_mode_set(struct bna_rx *rx, enum bna_rxmode new_mode,
 	struct bna_rxf *rxf = &rx->rxf;
 	int need_hw_config = 0;
 
-	/* Error checks */
+	/* Process the commands */
 
 	if (is_promisc_enable(new_mode, bitmask)) {
 		/* If promisc mode is already enabled elsewhere in the system */
 		if ((rx->bna->rxf_promisc_id != BFI_MAX_RXF) &&
 			(rx->bna->rxf_promisc_id != rxf->rxf_id))
 			goto err_return;
-
-		/* If default mode is already enabled in the system */
-		if (rx->bna->rxf_default_id != BFI_MAX_RXF)
-			goto err_return;
-
-		/* Trying to enable promiscuous and default mode together */
-		if (is_default_enable(new_mode, bitmask))
-			goto err_return;
-	}
-
-	if (is_default_enable(new_mode, bitmask)) {
-		/* If default mode is already enabled elsewhere in the system */
-		if ((rx->bna->rxf_default_id != BFI_MAX_RXF) &&
-			(rx->bna->rxf_default_id != rxf->rxf_id)) {
-				goto err_return;
-		}
-
-		/* If promiscuous mode is already enabled in the system */
-		if (rx->bna->rxf_promisc_id != BFI_MAX_RXF)
-			goto err_return;
-	}
-
-	/* Process the commands */
-
-	if (is_promisc_enable(new_mode, bitmask)) {
 		if (rxf_promisc_enable(rxf))
 			need_hw_config = 1;
 	} else if (is_promisc_disable(new_mode, bitmask)) {
@@ -2693,14 +2539,6 @@ bna_rx_mode_set(struct bna_rx *rx, enum bna_rxmode new_mode,
 			need_hw_config = 1;
 	}
 
-	if (is_default_enable(new_mode, bitmask)) {
-		if (rxf_default_enable(rxf))
-			need_hw_config = 1;
-	} else if (is_default_disable(new_mode, bitmask)) {
-		if (rxf_default_disable(rxf))
-			need_hw_config = 1;
-	}
-
 	if (is_allmulti_enable(new_mode, bitmask)) {
 		if (rxf_allmulti_enable(rxf))
 			need_hw_config = 1;
@@ -3126,7 +2964,6 @@ bna_init(struct bna *bna, struct bnad *bnad, struct bfa_pcidev *pcidev,
 
 	bna_mcam_mod_init(&bna->mcam_mod, bna, res_info);
 
-	bna->rxf_default_id = BFI_MAX_RXF;
 	bna->rxf_promisc_id = BFI_MAX_RXF;
 
 	/* Mbox q element for posting stat request to f/w */
diff --git a/drivers/net/bna/bna_txrx.c b/drivers/net/bna/bna_txrx.c
index ad93fdb0f42..58c7664040d 100644
--- a/drivers/net/bna/bna_txrx.c
+++ b/drivers/net/bna/bna_txrx.c
@@ -1226,8 +1226,7 @@ rxf_process_packet_filter_vlan(struct bna_rxf *rxf)
 	/* Apply the VLAN filter */
 	if (rxf->rxf_flags & BNA_RXF_FL_VLAN_CONFIG_PENDING) {
 		rxf->rxf_flags &= ~BNA_RXF_FL_VLAN_CONFIG_PENDING;
-		if (!(rxf->rxmode_active & BNA_RXMODE_PROMISC) &&
-			!(rxf->rxmode_active & BNA_RXMODE_DEFAULT))
+		if (!(rxf->rxmode_active & BNA_RXMODE_PROMISC))
 			__rxf_vlan_filter_set(rxf, rxf->vlan_filter_status);
 	}
 
@@ -1276,9 +1275,6 @@ rxf_process_packet_filter(struct bna_rxf *rxf)
 	if (rxf_process_packet_filter_promisc(rxf))
 		return 1;
 
-	if (rxf_process_packet_filter_default(rxf))
-		return 1;
-
 	if (rxf_process_packet_filter_allmulti(rxf))
 		return 1;
 
@@ -1340,9 +1336,6 @@ rxf_clear_packet_filter(struct bna_rxf *rxf)
 	if (rxf_clear_packet_filter_promisc(rxf))
 		return 1;
 
-	if (rxf_clear_packet_filter_default(rxf))
-		return 1;
-
 	if (rxf_clear_packet_filter_allmulti(rxf))
 		return 1;
 
@@ -1389,8 +1382,6 @@ rxf_reset_packet_filter(struct bna_rxf *rxf)
 
 	rxf_reset_packet_filter_promisc(rxf);
 
-	rxf_reset_packet_filter_default(rxf);
-
 	rxf_reset_packet_filter_allmulti(rxf);
 }
 
@@ -1441,12 +1432,16 @@ bna_rxf_init(struct bna_rxf *rxf,
 	memset(rxf->vlan_filter_table, 0,
 			(sizeof(u32) * ((BFI_MAX_VLAN + 1) / 32)));
 
+	/* Set up VLAN 0 for pure priority tagged packets */
+	rxf->vlan_filter_table[0] |= 1;
+
 	bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
 }
 
 static void
 bna_rxf_uninit(struct bna_rxf *rxf)
 {
+	struct bna *bna = rxf->rx->bna;
 	struct bna_mac *mac;
 
 	bna_rit_mod_seg_put(&rxf->rx->bna->rit_mod, rxf->rit_segment);
@@ -1473,6 +1468,27 @@ bna_rxf_uninit(struct bna_rxf *rxf)
 		bna_mcam_mod_mac_put(&rxf->rx->bna->mcam_mod, mac);
 	}
 
+	/* Turn off pending promisc mode */
+	if (is_promisc_enable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask)) {
+		/* system promisc state should be pending */
+		BUG_ON(!(bna->rxf_promisc_id == rxf->rxf_id));
+		promisc_inactive(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+		 bna->rxf_promisc_id = BFI_MAX_RXF;
+	}
+	/* Promisc mode should not be active */
+	BUG_ON(rxf->rxmode_active & BNA_RXMODE_PROMISC);
+
+	/* Turn off pending all-multi mode */
+	if (is_allmulti_enable(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask)) {
+		allmulti_inactive(rxf->rxmode_pending,
+				rxf->rxmode_pending_bitmask);
+	}
+	/* Allmulti mode should not be active */
+	BUG_ON(rxf->rxmode_active & BNA_RXMODE_ALLMULTI);
+
 	rxf->rx = NULL;
 }
 
@@ -1947,7 +1963,7 @@ bna_rx_sm_started_entry(struct bna_rx *rx)
 		bna_ib_ack(&rxp->cq.ib->door_bell, 0);
 	}
 
-	bna_llport_admin_up(&rx->bna->port.llport);
+	bna_llport_rx_started(&rx->bna->port.llport);
 }
 
 void
@@ -1955,13 +1971,13 @@ bna_rx_sm_started(struct bna_rx *rx, enum bna_rx_event event)
 {
 	switch (event) {
 	case RX_E_FAIL:
-		bna_llport_admin_down(&rx->bna->port.llport);
+		bna_llport_rx_stopped(&rx->bna->port.llport);
 		bfa_fsm_set_state(rx, bna_rx_sm_stopped);
 		rx_ib_fail(rx);
 		bna_rxf_fail(&rx->rxf);
 		break;
 	case RX_E_STOP:
-		bna_llport_admin_down(&rx->bna->port.llport);
+		bna_llport_rx_stopped(&rx->bna->port.llport);
 		bfa_fsm_set_state(rx, bna_rx_sm_rxf_stop_wait);
 		break;
 	default:
@@ -3373,7 +3389,7 @@ __bna_txq_start(struct bna_tx *tx, struct bna_txq *txq)
 
 	txq_cfg.cns_ptr2_n_q_state = BNA_Q_IDLE_STATE;
 	txq_cfg.nxt_qid_n_fid_n_pri = (((tx->txf.txf_id & 0x3f) << 3) |
-			(txq->priority & 0x3));
+			(txq->priority & 0x7));
 	txq_cfg.wvc_n_cquota_n_rquota =
 			((((u32)BFI_TX_MAX_WRR_QUOTA & 0xfff) << 12) |
 			(BFI_TX_MAX_WRR_QUOTA & 0xfff));
diff --git a/drivers/net/bna/bna_types.h b/drivers/net/bna/bna_types.h
index 6877310f6ef..b9c134f7ad3 100644
--- a/drivers/net/bna/bna_types.h
+++ b/drivers/net/bna/bna_types.h
@@ -165,8 +165,7 @@ enum bna_rxp_type {
 
 enum bna_rxmode {
 	BNA_RXMODE_PROMISC 	= 1,
-	BNA_RXMODE_DEFAULT 	= 2,
-	BNA_RXMODE_ALLMULTI 	= 4
+	BNA_RXMODE_ALLMULTI 	= 2
 };
 
 enum bna_rx_event {
@@ -249,8 +248,9 @@ enum bna_link_status {
 };
 
 enum bna_llport_flags {
-	BNA_LLPORT_F_ENABLED 	= 1,
-	BNA_LLPORT_F_RX_ENABLED	= 2
+	BNA_LLPORT_F_ADMIN_UP	 	= 1,
+	BNA_LLPORT_F_PORT_ENABLED	= 2,
+	BNA_LLPORT_F_RX_STARTED		= 4
 };
 
 enum bna_port_flags {
@@ -405,7 +405,7 @@ struct bna_llport {
 
 	enum bna_link_status link_status;
 
-	int			admin_up_count;
+	int			rx_started_count;
 
 	void (*stop_cbfn)(struct bna_port *, enum bna_cb_status);
 
@@ -1117,7 +1117,6 @@ struct bna {
 
 	struct bna_rit_mod rit_mod;
 
-	int			rxf_default_id;
 	int			rxf_promisc_id;
 
 	struct bna_mbox_qe mbox_qe;
diff --git a/drivers/net/bna/bnad.c b/drivers/net/bna/bnad.c
index 7e839b9cec2..fad912656fe 100644
--- a/drivers/net/bna/bnad.c
+++ b/drivers/net/bna/bnad.c
@@ -70,6 +70,8 @@ do {								\
 	(sizeof(struct bnad_skb_unmap) * ((_depth) - 1));	\
 } while (0)
 
+#define BNAD_TXRX_SYNC_MDELAY	250	/* 250 msecs */
+
 /*
  * Reinitialize completions in CQ, once Rx is taken down
  */
@@ -107,7 +109,7 @@ static void
 bnad_free_all_txbufs(struct bnad *bnad,
 		 struct bna_tcb *tcb)
 {
-	u16 		unmap_cons;
+	u32 		unmap_cons;
 	struct bnad_unmap_q *unmap_q = tcb->unmap_q;
 	struct bnad_skb_unmap *unmap_array;
 	struct sk_buff 		*skb = NULL;
@@ -130,7 +132,9 @@ bnad_free_all_txbufs(struct bnad *bnad,
 						PCI_DMA_TODEVICE);
 
 		pci_unmap_addr_set(&unmap_array[unmap_cons], dma_addr, 0);
-		unmap_cons++;
+		if (++unmap_cons >= unmap_q->q_depth)
+			break;
+
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 			pci_unmap_page(bnad->pcidev,
 				       pci_unmap_addr(&unmap_array[unmap_cons],
@@ -139,7 +143,8 @@ bnad_free_all_txbufs(struct bnad *bnad,
 				       PCI_DMA_TODEVICE);
 			pci_unmap_addr_set(&unmap_array[unmap_cons], dma_addr,
 					   0);
-			unmap_cons++;
+			if (++unmap_cons >= unmap_q->q_depth)
+				break;
 		}
 		dev_kfree_skb_any(skb);
 	}
@@ -167,11 +172,11 @@ bnad_free_txbufs(struct bnad *bnad,
 	/*
 	 * Just return if TX is stopped. This check is useful
 	 * when bnad_free_txbufs() runs out of a tasklet scheduled
-	 * before bnad_cb_tx_cleanup() cleared BNAD_RF_TX_STARTED bit
+	 * before bnad_cb_tx_cleanup() cleared BNAD_TXQ_TX_STARTED bit
 	 * but this routine runs actually after the cleanup has been
 	 * executed.
 	 */
-	if (!test_bit(BNAD_RF_TX_STARTED, &bnad->run_flags))
+	if (!test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))
 		return 0;
 
 	updated_hw_cons = *(tcb->hw_consumer_index);
@@ -239,7 +244,7 @@ bnad_tx_free_tasklet(unsigned long bnad_ptr)
 {
 	struct bnad *bnad = (struct bnad *)bnad_ptr;
 	struct bna_tcb *tcb;
-	u32 		acked;
+	u32 		acked = 0;
 	int			i, j;
 
 	for (i = 0; i < bnad->num_tx; i++) {
@@ -252,10 +257,26 @@ bnad_tx_free_tasklet(unsigned long bnad_ptr)
 				(!test_and_set_bit(BNAD_TXQ_FREE_SENT,
 						  &tcb->flags))) {
 				acked = bnad_free_txbufs(bnad, tcb);
-				bna_ib_ack(tcb->i_dbell, acked);
+				if (likely(test_bit(BNAD_TXQ_TX_STARTED,
+					&tcb->flags)))
+					bna_ib_ack(tcb->i_dbell, acked);
 				smp_mb__before_clear_bit();
 				clear_bit(BNAD_TXQ_FREE_SENT, &tcb->flags);
 			}
+			if (unlikely(!test_bit(BNAD_TXQ_TX_STARTED,
+						&tcb->flags)))
+				continue;
+			if (netif_queue_stopped(bnad->netdev)) {
+				if (acked && netif_carrier_ok(bnad->netdev) &&
+					BNA_QE_FREE_CNT(tcb, tcb->q_depth) >=
+						BNAD_NETIF_WAKE_THRESHOLD) {
+					netif_wake_queue(bnad->netdev);
+					/* TODO */
+					/* Counters for individual TxQs? */
+					BNAD_UPDATE_CTR(bnad,
+						netif_queue_wakeup);
+				}
+			}
 		}
 	}
 }
@@ -264,7 +285,7 @@ static u32
 bnad_tx(struct bnad *bnad, struct bna_tcb *tcb)
 {
 	struct net_device *netdev = bnad->netdev;
-	u32 sent;
+	u32 sent = 0;
 
 	if (test_and_set_bit(BNAD_TXQ_FREE_SENT, &tcb->flags))
 		return 0;
@@ -275,12 +296,15 @@ bnad_tx(struct bnad *bnad, struct bna_tcb *tcb)
 		    netif_carrier_ok(netdev) &&
 		    BNA_QE_FREE_CNT(tcb, tcb->q_depth) >=
 				    BNAD_NETIF_WAKE_THRESHOLD) {
-			netif_wake_queue(netdev);
-			BNAD_UPDATE_CTR(bnad, netif_queue_wakeup);
+			if (test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags)) {
+				netif_wake_queue(netdev);
+				BNAD_UPDATE_CTR(bnad, netif_queue_wakeup);
+			}
 		}
+	}
+
+	if (likely(test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags)))
 		bna_ib_ack(tcb->i_dbell, sent);
-	} else
-		bna_ib_ack(tcb->i_dbell, 0);
 
 	smp_mb__before_clear_bit();
 	clear_bit(BNAD_TXQ_FREE_SENT, &tcb->flags);
@@ -313,25 +337,24 @@ bnad_reset_rcb(struct bnad *bnad, struct bna_rcb *rcb)
 }
 
 static void
-bnad_free_rxbufs(struct bnad *bnad, struct bna_rcb *rcb)
+bnad_free_all_rxbufs(struct bnad *bnad, struct bna_rcb *rcb)
 {
 	struct bnad_unmap_q *unmap_q;
 	struct sk_buff *skb;
+	int unmap_cons;
 
 	unmap_q = rcb->unmap_q;
-	while (BNA_QE_IN_USE_CNT(unmap_q, unmap_q->q_depth)) {
-		skb = unmap_q->unmap_array[unmap_q->consumer_index].skb;
-		BUG_ON(!(skb));
-		unmap_q->unmap_array[unmap_q->consumer_index].skb = NULL;
+	for (unmap_cons = 0; unmap_cons < unmap_q->q_depth; unmap_cons++) {
+		skb = unmap_q->unmap_array[unmap_cons].skb;
+		if (!skb)
+			continue;
+		unmap_q->unmap_array[unmap_cons].skb = NULL;
 		pci_unmap_single(bnad->pcidev, pci_unmap_addr(&unmap_q->
-					unmap_array[unmap_q->consumer_index],
-					dma_addr), rcb->rxq->buffer_size +
-					NET_IP_ALIGN, PCI_DMA_FROMDEVICE);
+					unmap_array[unmap_cons],
+					dma_addr), rcb->rxq->buffer_size,
+					PCI_DMA_FROMDEVICE);
 		dev_kfree_skb(skb);
-		BNA_QE_INDX_ADD(unmap_q->consumer_index, 1, unmap_q->q_depth);
-		BNA_QE_INDX_ADD(rcb->consumer_index, 1, rcb->q_depth);
 	}
-
 	bnad_reset_rcb(bnad, rcb);
 }
 
@@ -385,43 +408,11 @@ finishing:
 		unmap_q->producer_index = unmap_prod;
 		rcb->producer_index = unmap_prod;
 		smp_mb();
-		bna_rxq_prod_indx_doorbell(rcb);
+		if (likely(test_bit(BNAD_RXQ_STARTED, &rcb->flags)))
+			bna_rxq_prod_indx_doorbell(rcb);
 	}
 }
 
-/*
- * Locking is required in the enable path
- * because it is called from a napi poll
- * context, where the bna_lock is not held
- * unlike the IRQ context.
- */
-static void
-bnad_enable_txrx_irqs(struct bnad *bnad)
-{
-	struct bna_tcb *tcb;
-	struct bna_ccb *ccb;
-	int i, j;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bnad->bna_lock, flags);
-	for (i = 0; i < bnad->num_tx; i++) {
-		for (j = 0; j < bnad->num_txq_per_tx; j++) {
-			tcb = bnad->tx_info[i].tcb[j];
-			bna_ib_coalescing_timer_set(tcb->i_dbell,
-				tcb->txq->ib->ib_config.coalescing_timeo);
-			bna_ib_ack(tcb->i_dbell, 0);
-		}
-	}
-
-	for (i = 0; i < bnad->num_rx; i++) {
-		for (j = 0; j < bnad->num_rxp_per_rx; j++) {
-			ccb = bnad->rx_info[i].rx_ctrl[j].ccb;
-			bnad_enable_rx_irq_unsafe(ccb);
-		}
-	}
-	spin_unlock_irqrestore(&bnad->bna_lock, flags);
-}
-
 static inline void
 bnad_refill_rxq(struct bnad *bnad, struct bna_rcb *rcb)
 {
@@ -448,6 +439,9 @@ bnad_poll_cq(struct bnad *bnad, struct bna_ccb *ccb, int budget)
 	u32 qid0 = ccb->rcb[0]->rxq->rxq_id;
 	struct bna_pkt_rate *pkt_rt = &ccb->pkt_rate;
 
+	if (!test_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags))
+		return 0;
+
 	prefetch(bnad->netdev);
 	BNA_CQ_QPGE_PTR_GET(ccb->producer_index, ccb->sw_qpt, cmpl,
 			    wi_range);
@@ -544,12 +538,15 @@ next:
 	BNA_QE_INDX_ADD(ccb->producer_index, wis, ccb->q_depth);
 
 	if (likely(ccb)) {
-		bna_ib_ack(ccb->i_dbell, packets);
+		if (likely(test_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags)))
+			bna_ib_ack(ccb->i_dbell, packets);
 		bnad_refill_rxq(bnad, ccb->rcb[0]);
 		if (ccb->rcb[1])
 			bnad_refill_rxq(bnad, ccb->rcb[1]);
-	} else
-		bna_ib_ack(ccb->i_dbell, 0);
+	} else {
+		if (likely(test_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags)))
+			bna_ib_ack(ccb->i_dbell, 0);
+	}
 
 	return packets;
 }
@@ -557,6 +554,9 @@ next:
 static void
 bnad_disable_rx_irq(struct bnad *bnad, struct bna_ccb *ccb)
 {
+	if (unlikely(!test_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags)))
+		return;
+
 	bna_ib_coalescing_timer_set(ccb->i_dbell, 0);
 	bna_ib_ack(ccb->i_dbell, 0);
 }
@@ -566,7 +566,8 @@ bnad_enable_rx_irq(struct bnad *bnad, struct bna_ccb *ccb)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&bnad->bna_lock, flags); /* Because of polling context */
+	/* Because of polling context */
+	spin_lock_irqsave(&bnad->bna_lock, flags);
 	bnad_enable_rx_irq_unsafe(ccb);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 }
@@ -575,9 +576,11 @@ static void
 bnad_netif_rx_schedule_poll(struct bnad *bnad, struct bna_ccb *ccb)
 {
 	struct bnad_rx_ctrl *rx_ctrl = (struct bnad_rx_ctrl *)(ccb->ctrl);
-	if (likely(napi_schedule_prep((&rx_ctrl->napi)))) {
+	struct napi_struct *napi = &rx_ctrl->napi;
+
+	if (likely(napi_schedule_prep(napi))) {
 		bnad_disable_rx_irq(bnad, ccb);
-		__napi_schedule((&rx_ctrl->napi));
+		__napi_schedule(napi);
 	}
 	BNAD_UPDATE_CTR(bnad, netif_rx_schedule);
 }
@@ -602,12 +605,11 @@ bnad_msix_mbox_handler(int irq, void *data)
 {
 	u32 intr_status;
 	unsigned long flags;
-	struct net_device *netdev = data;
-	struct bnad *bnad;
+	struct bnad *bnad = (struct bnad *)data;
 
-	bnad = netdev_priv(netdev);
+	if (unlikely(test_bit(BNAD_RF_MBOX_IRQ_DISABLED, &bnad->run_flags)))
+		return IRQ_HANDLED;
 
-	/* BNA_ISR_GET(bnad); Inc Ref count */
 	spin_lock_irqsave(&bnad->bna_lock, flags);
 
 	bna_intr_status_get(&bnad->bna, intr_status);
@@ -617,7 +619,6 @@ bnad_msix_mbox_handler(int irq, void *data)
 
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
-	/* BNAD_ISR_PUT(bnad); Dec Ref count */
 	return IRQ_HANDLED;
 }
 
@@ -627,8 +628,7 @@ bnad_isr(int irq, void *data)
 	int i, j;
 	u32 intr_status;
 	unsigned long flags;
-	struct net_device *netdev = data;
-	struct bnad *bnad = netdev_priv(netdev);
+	struct bnad *bnad = (struct bnad *)data;
 	struct bnad_rx_info *rx_info;
 	struct bnad_rx_ctrl *rx_ctrl;
 
@@ -642,16 +642,21 @@ bnad_isr(int irq, void *data)
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
 
-	if (BNA_IS_MBOX_ERR_INTR(intr_status)) {
+	if (BNA_IS_MBOX_ERR_INTR(intr_status))
 		bna_mbox_handler(&bnad->bna, intr_status);
-		if (!BNA_IS_INTX_DATA_INTR(intr_status)) {
-			spin_unlock_irqrestore(&bnad->bna_lock, flags);
-			goto done;
-		}
-	}
+
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
+	if (!BNA_IS_INTX_DATA_INTR(intr_status))
+		return IRQ_HANDLED;
+
 	/* Process data interrupts */
+	/* Tx processing */
+	for (i = 0; i < bnad->num_tx; i++) {
+		for (j = 0; j < bnad->num_txq_per_tx; j++)
+			bnad_tx(bnad, bnad->tx_info[i].tcb[j]);
+	}
+	/* Rx processing */
 	for (i = 0; i < bnad->num_rx; i++) {
 		rx_info = &bnad->rx_info[i];
 		if (!rx_info->rx)
@@ -663,7 +668,6 @@ bnad_isr(int irq, void *data)
 							    rx_ctrl->ccb);
 		}
 	}
-done:
 	return IRQ_HANDLED;
 }
 
@@ -674,11 +678,7 @@ done:
 static void
 bnad_enable_mbox_irq(struct bnad *bnad)
 {
-	int irq = BNAD_GET_MBOX_IRQ(bnad);
-
-	if (test_and_clear_bit(BNAD_RF_MBOX_IRQ_DISABLED, &bnad->run_flags))
-		if (bnad->cfg_flags & BNAD_CF_MSIX)
-			enable_irq(irq);
+	clear_bit(BNAD_RF_MBOX_IRQ_DISABLED, &bnad->run_flags);
 
 	BNAD_UPDATE_CTR(bnad, mbox_intr_enabled);
 }
@@ -690,14 +690,19 @@ bnad_enable_mbox_irq(struct bnad *bnad)
 static void
 bnad_disable_mbox_irq(struct bnad *bnad)
 {
-	int irq = BNAD_GET_MBOX_IRQ(bnad);
+	set_bit(BNAD_RF_MBOX_IRQ_DISABLED, &bnad->run_flags);
 
+	BNAD_UPDATE_CTR(bnad, mbox_intr_disabled);
+}
 
-	if (!test_and_set_bit(BNAD_RF_MBOX_IRQ_DISABLED, &bnad->run_flags))
-		if (bnad->cfg_flags & BNAD_CF_MSIX)
-			disable_irq_nosync(irq);
+static void
+bnad_set_netdev_perm_addr(struct bnad *bnad)
+{
+	struct net_device *netdev = bnad->netdev;
 
-	BNAD_UPDATE_CTR(bnad, mbox_intr_disabled);
+	memcpy(netdev->perm_addr, &bnad->perm_addr, netdev->addr_len);
+	if (is_zero_ether_addr(netdev->dev_addr))
+		memcpy(netdev->dev_addr, &bnad->perm_addr, netdev->addr_len);
 }
 
 /* Control Path Handlers */
@@ -755,11 +760,14 @@ bnad_cb_port_link_status(struct bnad *bnad,
 
 	if (link_up) {
 		if (!netif_carrier_ok(bnad->netdev)) {
+			struct bna_tcb *tcb = bnad->tx_info[0].tcb[0];
+			if (!tcb)
+				return;
 			pr_warn("bna: %s link up\n",
 				bnad->netdev->name);
 			netif_carrier_on(bnad->netdev);
 			BNAD_UPDATE_CTR(bnad, link_toggle);
-			if (test_bit(BNAD_RF_TX_STARTED, &bnad->run_flags)) {
+			if (test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags)) {
 				/* Force an immediate Transmit Schedule */
 				pr_info("bna: %s TX_STARTED\n",
 					bnad->netdev->name);
@@ -807,6 +815,18 @@ bnad_cb_tcb_destroy(struct bnad *bnad, struct bna_tcb *tcb)
 {
 	struct bnad_tx_info *tx_info =
 			(struct bnad_tx_info *)tcb->txq->tx->priv;
+	struct bnad_unmap_q *unmap_q = tcb->unmap_q;
+
+	while (test_and_set_bit(BNAD_TXQ_FREE_SENT, &tcb->flags))
+		cpu_relax();
+
+	bnad_free_all_txbufs(bnad, tcb);
+
+	unmap_q->producer_index = 0;
+	unmap_q->consumer_index = 0;
+
+	smp_mb__before_clear_bit();
+	clear_bit(BNAD_TXQ_FREE_SENT, &tcb->flags);
 
 	tx_info->tcb[tcb->id] = NULL;
 }
@@ -822,6 +842,12 @@ bnad_cb_rcb_setup(struct bnad *bnad, struct bna_rcb *rcb)
 }
 
 static void
+bnad_cb_rcb_destroy(struct bnad *bnad, struct bna_rcb *rcb)
+{
+	bnad_free_all_rxbufs(bnad, rcb);
+}
+
+static void
 bnad_cb_ccb_setup(struct bnad *bnad, struct bna_ccb *ccb)
 {
 	struct bnad_rx_info *rx_info =
@@ -849,7 +875,7 @@ bnad_cb_tx_stall(struct bnad *bnad, struct bna_tcb *tcb)
 	if (tx_info != &bnad->tx_info[0])
 		return;
 
-	clear_bit(BNAD_RF_TX_STARTED, &bnad->run_flags);
+	clear_bit(BNAD_TXQ_TX_STARTED, &tcb->flags);
 	netif_stop_queue(bnad->netdev);
 	pr_info("bna: %s TX_STOPPED\n", bnad->netdev->name);
 }
@@ -857,30 +883,15 @@ bnad_cb_tx_stall(struct bnad *bnad, struct bna_tcb *tcb)
 static void
 bnad_cb_tx_resume(struct bnad *bnad, struct bna_tcb *tcb)
 {
-	if (test_and_set_bit(BNAD_RF_TX_STARTED, &bnad->run_flags))
-		return;
-
-	if (netif_carrier_ok(bnad->netdev)) {
-		pr_info("bna: %s TX_STARTED\n", bnad->netdev->name);
-		netif_wake_queue(bnad->netdev);
-		BNAD_UPDATE_CTR(bnad, netif_queue_wakeup);
-	}
-}
-
-static void
-bnad_cb_tx_cleanup(struct bnad *bnad, struct bna_tcb *tcb)
-{
-	struct bnad_unmap_q *unmap_q;
+	struct bnad_unmap_q *unmap_q = tcb->unmap_q;
 
-	if (!tcb || (!tcb->unmap_q))
+	if (test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))
 		return;
 
-	unmap_q = tcb->unmap_q;
-	if (!unmap_q->unmap_array)
-		return;
+	clear_bit(BNAD_RF_TX_SHUTDOWN_DELAYED, &bnad->run_flags);
 
-	if (test_and_set_bit(BNAD_TXQ_FREE_SENT, &tcb->flags))
-		return;
+	while (test_and_set_bit(BNAD_TXQ_FREE_SENT, &tcb->flags))
+		cpu_relax();
 
 	bnad_free_all_txbufs(bnad, tcb);
 
@@ -889,21 +900,45 @@ bnad_cb_tx_cleanup(struct bnad *bnad, struct bna_tcb *tcb)
 
 	smp_mb__before_clear_bit();
 	clear_bit(BNAD_TXQ_FREE_SENT, &tcb->flags);
+
+	/*
+	 * Workaround for first device enable failure & we
+	 * get a 0 MAC address. We try to get the MAC address
+	 * again here.
+	 */
+	if (is_zero_ether_addr(&bnad->perm_addr.mac[0])) {
+		bna_port_mac_get(&bnad->bna.port, &bnad->perm_addr);
+		bnad_set_netdev_perm_addr(bnad);
+	}
+
+	set_bit(BNAD_TXQ_TX_STARTED, &tcb->flags);
+
+	if (netif_carrier_ok(bnad->netdev)) {
+		pr_info("bna: %s TX_STARTED\n", bnad->netdev->name);
+		netif_wake_queue(bnad->netdev);
+		BNAD_UPDATE_CTR(bnad, netif_queue_wakeup);
+	}
+}
+
+static void
+bnad_cb_tx_cleanup(struct bnad *bnad, struct bna_tcb *tcb)
+{
+	/* Delay only once for the whole Tx Path Shutdown */
+	if (!test_and_set_bit(BNAD_RF_TX_SHUTDOWN_DELAYED, &bnad->run_flags))
+		mdelay(BNAD_TXRX_SYNC_MDELAY);
 }
 
 static void
 bnad_cb_rx_cleanup(struct bnad *bnad,
 			struct bna_ccb *ccb)
 {
-	bnad_cq_cmpl_init(bnad, ccb);
-
-	bnad_free_rxbufs(bnad, ccb->rcb[0]);
 	clear_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags);
 
-	if (ccb->rcb[1]) {
-		bnad_free_rxbufs(bnad, ccb->rcb[1]);
+	if (ccb->rcb[1])
 		clear_bit(BNAD_RXQ_STARTED, &ccb->rcb[1]->flags);
-	}
+
+	if (!test_and_set_bit(BNAD_RF_RX_SHUTDOWN_DELAYED, &bnad->run_flags))
+		mdelay(BNAD_TXRX_SYNC_MDELAY);
 }
 
 static void
@@ -911,6 +946,13 @@ bnad_cb_rx_post(struct bnad *bnad, struct bna_rcb *rcb)
 {
 	struct bnad_unmap_q *unmap_q = rcb->unmap_q;
 
+	clear_bit(BNAD_RF_RX_SHUTDOWN_DELAYED, &bnad->run_flags);
+
+	if (rcb == rcb->cq->ccb->rcb[0])
+		bnad_cq_cmpl_init(bnad, rcb->cq->ccb);
+
+	bnad_free_all_rxbufs(bnad, rcb);
+
 	set_bit(BNAD_RXQ_STARTED, &rcb->flags);
 
 	/* Now allocate & post buffers for this RCB */
@@ -1047,7 +1089,7 @@ bnad_mbox_irq_free(struct bnad *bnad,
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
 	irq = BNAD_GET_MBOX_IRQ(bnad);
-	free_irq(irq, bnad->netdev);
+	free_irq(irq, bnad);
 
 	kfree(intr_info->idl);
 }
@@ -1061,7 +1103,7 @@ static int
 bnad_mbox_irq_alloc(struct bnad *bnad,
 		    struct bna_intr_info *intr_info)
 {
-	int 		err;
+	int 		err = 0;
 	unsigned long 	flags;
 	u32	irq;
 	irq_handler_t 	irq_handler;
@@ -1096,22 +1138,17 @@ bnad_mbox_irq_alloc(struct bnad *bnad,
 	 */
 	set_bit(BNAD_RF_MBOX_IRQ_DISABLED, &bnad->run_flags);
 
+	BNAD_UPDATE_CTR(bnad, mbox_intr_disabled);
+
 	err = request_irq(irq, irq_handler, flags,
-			  bnad->mbox_irq_name, bnad->netdev);
+			  bnad->mbox_irq_name, bnad);
 
 	if (err) {
 		kfree(intr_info->idl);
 		intr_info->idl = NULL;
-		return err;
 	}
 
-	spin_lock_irqsave(&bnad->bna_lock, flags);
-
-	if (bnad->cfg_flags & BNAD_CF_MSIX)
-		disable_irq_nosync(irq);
-
-	spin_unlock_irqrestore(&bnad->bna_lock, flags);
-	return 0;
+	return err;
 }
 
 static void
@@ -1388,13 +1425,24 @@ bnad_ioc_hb_check(unsigned long data)
 }
 
 static void
-bnad_ioc_sem_timeout(unsigned long data)
+bnad_iocpf_timeout(unsigned long data)
+{
+	struct bnad *bnad = (struct bnad *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bnad->bna_lock, flags);
+	bfa_nw_iocpf_timeout((void *) &bnad->bna.device.ioc);
+	spin_unlock_irqrestore(&bnad->bna_lock, flags);
+}
+
+static void
+bnad_iocpf_sem_timeout(unsigned long data)
 {
 	struct bnad *bnad = (struct bnad *)data;
 	unsigned long flags;
 
 	spin_lock_irqsave(&bnad->bna_lock, flags);
-	bfa_nw_ioc_sem_timeout((void *) &bnad->bna.device.ioc);
+	bfa_nw_iocpf_sem_timeout((void *) &bnad->bna.device.ioc);
 	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 }
 
@@ -1555,62 +1603,19 @@ poll_exit:
 	return rcvd;
 }
 
-static int
-bnad_napi_poll_txrx(struct napi_struct *napi, int budget)
-{
-	struct bnad_rx_ctrl *rx_ctrl =
-		container_of(napi, struct bnad_rx_ctrl, napi);
-	struct bna_ccb *ccb;
-	struct bnad *bnad;
-	int 			rcvd = 0;
-	int			i, j;
-
-	ccb = rx_ctrl->ccb;
-
-	bnad = ccb->bnad;
-
-	if (!netif_carrier_ok(bnad->netdev))
-		goto poll_exit;
-
-	/* Handle Tx Completions, if any */
-	for (i = 0; i < bnad->num_tx; i++) {
-		for (j = 0; j < bnad->num_txq_per_tx; j++)
-			bnad_tx(bnad, bnad->tx_info[i].tcb[j]);
-	}
-
-	/* Handle Rx Completions */
-	rcvd = bnad_poll_cq(bnad, ccb, budget);
-	if (rcvd == budget)
-		return rcvd;
-poll_exit:
-	napi_complete((napi));
-
-	BNAD_UPDATE_CTR(bnad, netif_rx_complete);
-
-	bnad_enable_txrx_irqs(bnad);
-	return rcvd;
-}
-
 static void
 bnad_napi_enable(struct bnad *bnad, u32 rx_id)
 {
-	int (*napi_poll) (struct napi_struct *, int);
 	struct bnad_rx_ctrl *rx_ctrl;
 	int i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&bnad->bna_lock, flags);
-	if (bnad->cfg_flags & BNAD_CF_MSIX)
-		napi_poll = bnad_napi_poll_rx;
-	else
-		napi_poll = bnad_napi_poll_txrx;
-	spin_unlock_irqrestore(&bnad->bna_lock, flags);
 
 	/* Initialize & enable NAPI */
 	for (i = 0; i <	bnad->num_rxp_per_rx; i++) {
 		rx_ctrl = &bnad->rx_info[rx_id].rx_ctrl[i];
+
 		netif_napi_add(bnad->netdev, &rx_ctrl->napi,
-			       napi_poll, 64);
+			       bnad_napi_poll_rx, 64);
+
 		napi_enable(&rx_ctrl->napi);
 	}
 }
@@ -1825,6 +1830,7 @@ bnad_setup_rx(struct bnad *bnad, uint rx_id)
 
 	/* Initialize the Rx event handlers */
 	rx_cbfn.rcb_setup_cbfn = bnad_cb_rcb_setup;
+	rx_cbfn.rcb_destroy_cbfn = bnad_cb_rcb_destroy;
 	rx_cbfn.rcb_destroy_cbfn = NULL;
 	rx_cbfn.ccb_setup_cbfn = bnad_cb_ccb_setup;
 	rx_cbfn.ccb_destroy_cbfn = bnad_cb_ccb_destroy;
@@ -1968,6 +1974,27 @@ bnad_enable_default_bcast(struct bnad *bnad)
 	return 0;
 }
 
+/* Called with bnad_conf_lock() held */
+static void
+bnad_restore_vlans(struct bnad *bnad, u32 rx_id)
+{
+	u16 vlan_id;
+	unsigned long flags;
+
+	if (!bnad->vlan_grp)
+		return;
+
+	BUG_ON(!(VLAN_N_VID == (BFI_MAX_VLAN + 1)));
+
+	for (vlan_id = 0; vlan_id < VLAN_N_VID; vlan_id++) {
+		if (!vlan_group_get_device(bnad->vlan_grp, vlan_id))
+			continue;
+		spin_lock_irqsave(&bnad->bna_lock, flags);
+		bna_rx_vlan_add(bnad->rx_info[rx_id].rx, vlan_id);
+		spin_unlock_irqrestore(&bnad->bna_lock, flags);
+	}
+}
+
 /* Statistics utilities */
 void
 bnad_netdev_qstats_fill(struct bnad *bnad, struct rtnl_link_stats64 *stats)
@@ -2152,16 +2179,6 @@ bnad_q_num_adjust(struct bnad *bnad, int msix_vectors)
 		bnad->num_rxp_per_rx = 1;
 }
 
-static void
-bnad_set_netdev_perm_addr(struct bnad *bnad)
-{
-	struct net_device *netdev = bnad->netdev;
-
-	memcpy(netdev->perm_addr, &bnad->perm_addr, netdev->addr_len);
-	if (is_zero_ether_addr(netdev->dev_addr))
-		memcpy(netdev->dev_addr, &bnad->perm_addr, netdev->addr_len);
-}
-
 /* Enable / disable device */
 static void
 bnad_device_disable(struct bnad *bnad)
@@ -2353,6 +2370,9 @@ bnad_open(struct net_device *netdev)
 	/* Enable broadcast */
 	bnad_enable_default_bcast(bnad);
 
+	/* Restore VLANs, if any */
+	bnad_restore_vlans(bnad, 0);
+
 	/* Set the UCAST address */
 	spin_lock_irqsave(&bnad->bna_lock, flags);
 	bnad_mac_addr_set_locked(bnad, netdev->dev_addr);
@@ -2433,21 +2453,21 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		return NETDEV_TX_OK;
 	}
 
+	tx_id = 0;
+
+	tx_info = &bnad->tx_info[tx_id];
+	tcb = tx_info->tcb[tx_id];
+	unmap_q = tcb->unmap_q;
+
 	/*
 	 * Takes care of the Tx that is scheduled between clearing the flag
 	 * and the netif_stop_queue() call.
 	 */
-	if (unlikely(!test_bit(BNAD_RF_TX_STARTED, &bnad->run_flags))) {
+	if (unlikely(!test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))) {
 		dev_kfree_skb(skb);
 		return NETDEV_TX_OK;
 	}
 
-	tx_id = 0;
-
-	tx_info = &bnad->tx_info[tx_id];
-	tcb = tx_info->tcb[tx_id];
-	unmap_q = tcb->unmap_q;
-
 	vectors = 1 + skb_shinfo(skb)->nr_frags;
 	if (vectors > BFI_TX_MAX_VECTORS_PER_PKT) {
 		dev_kfree_skb(skb);
@@ -2462,7 +2482,8 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		    tcb->consumer_index &&
 		    !test_and_set_bit(BNAD_TXQ_FREE_SENT, &tcb->flags)) {
 			acked = bnad_free_txbufs(bnad, tcb);
-			bna_ib_ack(tcb->i_dbell, acked);
+			if (likely(test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags)))
+				bna_ib_ack(tcb->i_dbell, acked);
 			smp_mb__before_clear_bit();
 			clear_bit(BNAD_TXQ_FREE_SENT, &tcb->flags);
 		} else {
@@ -2624,6 +2645,10 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	tcb->producer_index = txq_prod;
 
 	smp_mb();
+
+	if (unlikely(!test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags)))
+		return NETDEV_TX_OK;
+
 	bna_txq_prod_indx_doorbell(tcb);
 
 	if ((u16) (*tcb->hw_consumer_index) != tcb->consumer_index)
@@ -3032,7 +3057,7 @@ static int __devinit
 bnad_pci_probe(struct pci_dev *pdev,
 		const struct pci_device_id *pcidev_id)
 {
-	bool 	using_dac;
+	bool 	using_dac = false;
 	int 	err;
 	struct bnad *bnad;
 	struct bna *bna;
@@ -3066,7 +3091,7 @@ bnad_pci_probe(struct pci_dev *pdev,
 	/*
 	 * PCI initialization
 	 * 	Output : using_dac = 1 for 64 bit DMA
-	 *		           = 0 for 32 bit DMA
+	 *			   = 0 for 32 bit DMA
 	 */
 	err = bnad_pci_init(bnad, pdev, &using_dac);
 	if (err)
@@ -3084,6 +3109,9 @@ bnad_pci_probe(struct pci_dev *pdev,
 	/* Initialize netdev structure, set up ethtool ops */
 	bnad_netdev_init(bnad, using_dac);
 
+	/* Set link to down state */
+	netif_carrier_off(netdev);
+
 	bnad_enable_msix(bnad);
 
 	/* Get resource requirement form bna */
@@ -3115,11 +3143,13 @@ bnad_pci_probe(struct pci_dev *pdev,
 				((unsigned long)bnad));
 	setup_timer(&bnad->bna.device.ioc.hb_timer, bnad_ioc_hb_check,
 				((unsigned long)bnad));
-	setup_timer(&bnad->bna.device.ioc.sem_timer, bnad_ioc_sem_timeout,
+	setup_timer(&bnad->bna.device.ioc.iocpf_timer, bnad_iocpf_timeout,
+				((unsigned long)bnad));
+	setup_timer(&bnad->bna.device.ioc.sem_timer, bnad_iocpf_sem_timeout,
 				((unsigned long)bnad));
 
 	/* Now start the timer before calling IOC */
-	mod_timer(&bnad->bna.device.ioc.ioc_timer,
+	mod_timer(&bnad->bna.device.ioc.iocpf_timer,
 		  jiffies + msecs_to_jiffies(BNA_IOC_TIMER_FREQ));
 
 	/*
@@ -3137,11 +3167,6 @@ bnad_pci_probe(struct pci_dev *pdev,
 
 	mutex_unlock(&bnad->conf_mutex);
 
-	/*
-	 * Make sure the link appears down to the stack
-	 */
-	netif_carrier_off(netdev);
-
 	/* Finally, reguister with net_device layer */
 	err = register_netdev(netdev);
 	if (err) {
diff --git a/drivers/net/bna/bnad.h b/drivers/net/bna/bnad.h
index ebc3a907864..8b1d51557de 100644
--- a/drivers/net/bna/bnad.h
+++ b/drivers/net/bna/bnad.h
@@ -51,6 +51,7 @@
  */
 struct bnad_rx_ctrl {
 	struct bna_ccb *ccb;
+	unsigned long  flags;
 	struct napi_struct	napi;
 };
 
@@ -64,7 +65,7 @@ struct bnad_rx_ctrl {
 #define BNAD_NAME			"bna"
 #define BNAD_NAME_LEN			64
 
-#define BNAD_VERSION			"2.3.2.0"
+#define BNAD_VERSION			"2.3.2.3"
 
 #define BNAD_MAILBOX_MSIX_VECTORS	1
 
@@ -82,6 +83,7 @@ struct bnad_rx_ctrl {
 
 /* Bit positions for tcb->flags */
 #define BNAD_TXQ_FREE_SENT		0
+#define BNAD_TXQ_TX_STARTED		1
 
 /* Bit positions for rcb->flags */
 #define BNAD_RXQ_REFILL			0
@@ -124,6 +126,7 @@ struct bnad_completion {
 struct bnad_drv_stats {
 	u64 		netif_queue_stop;
 	u64		netif_queue_wakeup;
+	u64		netif_queue_stopped;
 	u64		tso4;
 	u64		tso6;
 	u64		tso_err;
@@ -199,12 +202,12 @@ struct bnad_unmap_q {
 /* Set, tested & cleared using xxx_bit() functions */
 /* Values indicated bit positions */
 #define	BNAD_RF_CEE_RUNNING		1
-#define BNAD_RF_HW_ERROR 		2
-#define BNAD_RF_MBOX_IRQ_DISABLED	3
-#define BNAD_RF_TX_STARTED		4
-#define BNAD_RF_RX_STARTED		5
-#define BNAD_RF_DIM_TIMER_RUNNING	6
-#define BNAD_RF_STATS_TIMER_RUNNING	7
+#define BNAD_RF_MBOX_IRQ_DISABLED	2
+#define BNAD_RF_RX_STARTED		3
+#define BNAD_RF_DIM_TIMER_RUNNING	4
+#define BNAD_RF_STATS_TIMER_RUNNING	5
+#define BNAD_RF_TX_SHUTDOWN_DELAYED	6
+#define BNAD_RF_RX_SHUTDOWN_DELAYED	7
 
 struct bnad {
 	struct net_device 	*netdev;
@@ -306,8 +309,10 @@ extern void bnad_cleanup_rx(struct bnad *bnad, uint rx_id);
 extern void bnad_dim_timer_start(struct bnad *bnad);
 
 /* Statistics */
-extern void bnad_netdev_qstats_fill(struct bnad *bnad, struct rtnl_link_stats64 *stats);
-extern void bnad_netdev_hwstats_fill(struct bnad *bnad, struct rtnl_link_stats64 *stats);
+extern void bnad_netdev_qstats_fill(struct bnad *bnad,
+		struct rtnl_link_stats64 *stats);
+extern void bnad_netdev_hwstats_fill(struct bnad *bnad,
+		struct rtnl_link_stats64 *stats);
 
 /**
  * MACROS
@@ -320,9 +325,11 @@ extern void bnad_netdev_hwstats_fill(struct bnad *bnad, struct rtnl_link_stats64
 
 #define bnad_enable_rx_irq_unsafe(_ccb)			\
 {							\
-	bna_ib_coalescing_timer_set((_ccb)->i_dbell,	\
-		(_ccb)->rx_coalescing_timeo);		\
-	bna_ib_ack((_ccb)->i_dbell, 0);			\
+	if (likely(test_bit(BNAD_RXQ_STARTED, &ccb->rcb[0]->flags))) {\
+		bna_ib_coalescing_timer_set((_ccb)->i_dbell,	\
+			(_ccb)->rx_coalescing_timeo);		\
+		bna_ib_ack((_ccb)->i_dbell, 0);			\
+	}							\
 }
 
 #define bnad_dim_timer_running(_bnad)				\
diff --git a/drivers/net/bna/bnad_ethtool.c b/drivers/net/bna/bnad_ethtool.c
index 11fa2ea842c..99be5ae9199 100644
--- a/drivers/net/bna/bnad_ethtool.c
+++ b/drivers/net/bna/bnad_ethtool.c
@@ -68,6 +68,7 @@ static char *bnad_net_stats_strings[BNAD_ETHTOOL_STATS_NUM] = {
 
 	"netif_queue_stop",
 	"netif_queue_wakeup",
+	"netif_queue_stopped",
 	"tso4",
 	"tso6",
 	"tso_err",
@@ -330,10 +331,6 @@ do {								\
 
 	BNAD_GET_REG(PCIE_MISC_REG);
 
-	BNAD_GET_REG(HOST_SEM0_REG);
-	BNAD_GET_REG(HOST_SEM1_REG);
-	BNAD_GET_REG(HOST_SEM2_REG);
-	BNAD_GET_REG(HOST_SEM3_REG);
 	BNAD_GET_REG(HOST_SEM0_INFO_REG);
 	BNAD_GET_REG(HOST_SEM1_INFO_REG);
 	BNAD_GET_REG(HOST_SEM2_INFO_REG);
@@ -1184,6 +1181,9 @@ bnad_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats,
 
 	bi = sizeof(*net_stats64) / sizeof(u64);
 
+	/* Get netif_queue_stopped from stack */
+	bnad->stats.drv_stats.netif_queue_stopped = netif_queue_stopped(netdev);
+
 	/* Fill driver stats into ethtool buffers */
 	stats64 = (u64 *)&bnad->stats.drv_stats;
 	for (i = 0; i < sizeof(struct bnad_drv_stats) / sizeof(u64); i++)
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 062600be073..df99edf3464 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -56,11 +56,11 @@
 #include "bnx2_fw.h"
 
 #define DRV_MODULE_NAME		"bnx2"
-#define DRV_MODULE_VERSION	"2.0.18"
-#define DRV_MODULE_RELDATE	"Oct 7, 2010"
-#define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-6.0.15.fw"
+#define DRV_MODULE_VERSION	"2.0.21"
+#define DRV_MODULE_RELDATE	"Dec 23, 2010"
+#define FW_MIPS_FILE_06		"bnx2/bnx2-mips-06-6.2.1.fw"
 #define FW_RV2P_FILE_06		"bnx2/bnx2-rv2p-06-6.0.15.fw"
-#define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-6.0.17.fw"
+#define FW_MIPS_FILE_09		"bnx2/bnx2-mips-09-6.2.1.fw"
 #define FW_RV2P_FILE_09_Ax	"bnx2/bnx2-rv2p-09ax-6.0.17.fw"
 #define FW_RV2P_FILE_09		"bnx2/bnx2-rv2p-09-6.0.17.fw"
 
@@ -766,13 +766,10 @@ bnx2_alloc_rx_mem(struct bnx2 *bp)
 		int j;
 
 		rxr->rx_buf_ring =
-			vmalloc(SW_RXBD_RING_SIZE * bp->rx_max_ring);
+			vzalloc(SW_RXBD_RING_SIZE * bp->rx_max_ring);
 		if (rxr->rx_buf_ring == NULL)
 			return -ENOMEM;
 
-		memset(rxr->rx_buf_ring, 0,
-		       SW_RXBD_RING_SIZE * bp->rx_max_ring);
-
 		for (j = 0; j < bp->rx_max_ring; j++) {
 			rxr->rx_desc_ring[j] =
 				dma_alloc_coherent(&bp->pdev->dev,
@@ -785,13 +782,11 @@ bnx2_alloc_rx_mem(struct bnx2 *bp)
 		}
 
 		if (bp->rx_pg_ring_size) {
-			rxr->rx_pg_ring = vmalloc(SW_RXPG_RING_SIZE *
+			rxr->rx_pg_ring = vzalloc(SW_RXPG_RING_SIZE *
 						  bp->rx_max_pg_ring);
 			if (rxr->rx_pg_ring == NULL)
 				return -ENOMEM;
 
-			memset(rxr->rx_pg_ring, 0, SW_RXPG_RING_SIZE *
-			       bp->rx_max_pg_ring);
 		}
 
 		for (j = 0; j < bp->rx_max_pg_ring; j++) {
@@ -4645,13 +4640,28 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
 
 	/* Wait for the current PCI transaction to complete before
 	 * issuing a reset. */
-	REG_WR(bp, BNX2_MISC_ENABLE_CLR_BITS,
-	       BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE |
-	       BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE |
-	       BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE |
-	       BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE);
-	val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS);
-	udelay(5);
+	if ((CHIP_NUM(bp) == CHIP_NUM_5706) ||
+	    (CHIP_NUM(bp) == CHIP_NUM_5708)) {
+		REG_WR(bp, BNX2_MISC_ENABLE_CLR_BITS,
+		       BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE |
+		       BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE |
+		       BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE |
+		       BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE);
+		val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS);
+		udelay(5);
+	} else {  /* 5709 */
+		val = REG_RD(bp, BNX2_MISC_NEW_CORE_CTL);
+		val &= ~BNX2_MISC_NEW_CORE_CTL_DMA_ENABLE;
+		REG_WR(bp, BNX2_MISC_NEW_CORE_CTL, val);
+		val = REG_RD(bp, BNX2_MISC_NEW_CORE_CTL);
+
+		for (i = 0; i < 100; i++) {
+			msleep(1);
+			val = REG_RD(bp, BNX2_PCICFG_DEVICE_CONTROL);
+			if (!(val & BNX2_PCICFG_DEVICE_STATUS_NO_PEND))
+				break;
+		}
+	}
 
 	/* Wait for the firmware to tell us it is ok to issue a reset. */
 	bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1, 1);
@@ -4673,7 +4683,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
 		val = BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
 		      BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP;
 
-		pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, val);
+		REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val);
 
 	} else {
 		val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ |
@@ -6086,7 +6096,7 @@ bnx2_request_irq(struct bnx2 *bp)
 }
 
 static void
-bnx2_free_irq(struct bnx2 *bp)
+__bnx2_free_irq(struct bnx2 *bp)
 {
 	struct bnx2_irq *irq;
 	int i;
@@ -6097,6 +6107,13 @@ bnx2_free_irq(struct bnx2 *bp)
 			free_irq(irq->vector, &bp->bnx2_napi[i]);
 		irq->requested = 0;
 	}
+}
+
+static void
+bnx2_free_irq(struct bnx2 *bp)
+{
+
+	__bnx2_free_irq(bp);
 	if (bp->flags & BNX2_FLAG_USING_MSI)
 		pci_disable_msi(bp->pdev);
 	else if (bp->flags & BNX2_FLAG_USING_MSIX)
@@ -6801,28 +6818,30 @@ bnx2_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *_p)
 	u32 *p = _p, i, offset;
 	u8 *orig_p = _p;
 	struct bnx2 *bp = netdev_priv(dev);
-	u32 reg_boundaries[] = { 0x0000, 0x0098, 0x0400, 0x045c,
-				 0x0800, 0x0880, 0x0c00, 0x0c10,
-				 0x0c30, 0x0d08, 0x1000, 0x101c,
-				 0x1040, 0x1048, 0x1080, 0x10a4,
-				 0x1400, 0x1490, 0x1498, 0x14f0,
-				 0x1500, 0x155c, 0x1580, 0x15dc,
-				 0x1600, 0x1658, 0x1680, 0x16d8,
-				 0x1800, 0x1820, 0x1840, 0x1854,
-				 0x1880, 0x1894, 0x1900, 0x1984,
-				 0x1c00, 0x1c0c, 0x1c40, 0x1c54,
-				 0x1c80, 0x1c94, 0x1d00, 0x1d84,
-				 0x2000, 0x2030, 0x23c0, 0x2400,
-				 0x2800, 0x2820, 0x2830, 0x2850,
-				 0x2b40, 0x2c10, 0x2fc0, 0x3058,
-				 0x3c00, 0x3c94, 0x4000, 0x4010,
-				 0x4080, 0x4090, 0x43c0, 0x4458,
-				 0x4c00, 0x4c18, 0x4c40, 0x4c54,
-				 0x4fc0, 0x5010, 0x53c0, 0x5444,
-				 0x5c00, 0x5c18, 0x5c80, 0x5c90,
-				 0x5fc0, 0x6000, 0x6400, 0x6428,
-				 0x6800, 0x6848, 0x684c, 0x6860,
-				 0x6888, 0x6910, 0x8000 };
+	static const u32 reg_boundaries[] = {
+		0x0000, 0x0098, 0x0400, 0x045c,
+		0x0800, 0x0880, 0x0c00, 0x0c10,
+		0x0c30, 0x0d08, 0x1000, 0x101c,
+		0x1040, 0x1048, 0x1080, 0x10a4,
+		0x1400, 0x1490, 0x1498, 0x14f0,
+		0x1500, 0x155c, 0x1580, 0x15dc,
+		0x1600, 0x1658, 0x1680, 0x16d8,
+		0x1800, 0x1820, 0x1840, 0x1854,
+		0x1880, 0x1894, 0x1900, 0x1984,
+		0x1c00, 0x1c0c, 0x1c40, 0x1c54,
+		0x1c80, 0x1c94, 0x1d00, 0x1d84,
+		0x2000, 0x2030, 0x23c0, 0x2400,
+		0x2800, 0x2820, 0x2830, 0x2850,
+		0x2b40, 0x2c10, 0x2fc0, 0x3058,
+		0x3c00, 0x3c94, 0x4000, 0x4010,
+		0x4080, 0x4090, 0x43c0, 0x4458,
+		0x4c00, 0x4c18, 0x4c40, 0x4c54,
+		0x4fc0, 0x5010, 0x53c0, 0x5444,
+		0x5c00, 0x5c18, 0x5c80, 0x5c90,
+		0x5fc0, 0x6000, 0x6400, 0x6428,
+		0x6800, 0x6848, 0x684c, 0x6860,
+		0x6888, 0x6910, 0x8000
+	};
 
 	regs->version = 0;
 
@@ -7080,6 +7099,7 @@ bnx2_change_ring_size(struct bnx2 *bp, u32 rx, u32 tx)
 
 		bnx2_netif_stop(bp, true);
 		bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET);
+		__bnx2_free_irq(bp);
 		bnx2_free_skbs(bp);
 		bnx2_free_mem(bp);
 	}
@@ -7092,6 +7112,9 @@ bnx2_change_ring_size(struct bnx2 *bp, u32 rx, u32 tx)
 
 		rc = bnx2_alloc_mem(bp);
 		if (!rc)
+			rc = bnx2_request_irq(bp);
+
+		if (!rc)
 			rc = bnx2_init_nic(bp, 0);
 
 		if (rc) {
@@ -7914,15 +7937,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 		goto err_out_release;
 	}
 
+	bnx2_set_power_state(bp, PCI_D0);
+
 	/* Configure byte swap and enable write to the reg_window registers.
 	 * Rely on CPU to do target byte swapping on big endian systems
 	 * The chip's target access swapping will not swap all accesses
 	 */
-	pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG,
-			       BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
-			       BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP);
-
-	bnx2_set_power_state(bp, PCI_D0);
+	REG_WR(bp, BNX2_PCICFG_MISC_CONFIG,
+		   BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA |
+		   BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP);
 
 	bp->chip_id = REG_RD(bp, BNX2_MISC_ID);
 
@@ -8383,8 +8406,6 @@ bnx2_remove_one(struct pci_dev *pdev)
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct bnx2 *bp = netdev_priv(dev);
 
-	flush_scheduled_work();
-
 	unregister_netdev(dev);
 
 	if (bp->mips_firmware)
@@ -8421,7 +8442,7 @@ bnx2_suspend(struct pci_dev *pdev, pm_message_t state)
 	if (!netif_running(dev))
 		return 0;
 
-	flush_scheduled_work();
+	cancel_work_sync(&bp->reset_task);
 	bnx2_netif_stop(bp, true);
 	netif_device_detach(dev);
 	del_timer_sync(&bp->timer);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index bf4c3421067..5488a2e82fe 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -461,6 +461,8 @@ struct l2_fhdr {
 #define BNX2_PCICFG_MAILBOX_QUEUE_ADDR			0x00000090
 #define BNX2_PCICFG_MAILBOX_QUEUE_DATA			0x00000094
 
+#define BNX2_PCICFG_DEVICE_CONTROL			0x000000b4
+#define BNX2_PCICFG_DEVICE_STATUS_NO_PEND		 ((1L<<5)<<16)
 
 /*
  *  pci_reg definition
diff --git a/drivers/net/bnx2x/Makefile b/drivers/net/bnx2x/Makefile
index 084afce89ae..bb83a296127 100644
--- a/drivers/net/bnx2x/Makefile
+++ b/drivers/net/bnx2x/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_BNX2X) += bnx2x.o
 
-bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o
+bnx2x-objs := bnx2x_main.o bnx2x_link.o bnx2x_cmn.o bnx2x_ethtool.o bnx2x_stats.o bnx2x_dcb.o
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 863e73a85fb..77d6c8d6d86 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -13,6 +13,8 @@
 
 #ifndef BNX2X_H
 #define BNX2X_H
+#include <linux/netdevice.h>
+#include <linux/types.h>
 
 /* compilation time flags */
 
@@ -20,15 +22,17 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
-#define DRV_MODULE_VERSION      "1.60.00-4"
-#define DRV_MODULE_RELDATE      "2010/11/01"
+#define DRV_MODULE_VERSION      "1.62.00-3"
+#define DRV_MODULE_RELDATE      "2010/12/21"
 #define BNX2X_BC_VER            0x040200
 
 #define BNX2X_MULTI_QUEUE
 
 #define BNX2X_NEW_NAPI
 
-
+#if defined(CONFIG_DCB)
+#define BCM_DCB
+#endif
 #if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
 #define BCM_CNIC 1
 #include "../cnic_if.h"
@@ -48,6 +52,7 @@
 #include "bnx2x_fw_defs.h"
 #include "bnx2x_hsi.h"
 #include "bnx2x_link.h"
+#include "bnx2x_dcb.h"
 #include "bnx2x_stats.h"
 
 /* error/debug prints */
@@ -199,10 +204,25 @@ void bnx2x_panic_dump(struct bnx2x *bp);
 /* EQ completions */
 #define HC_SP_INDEX_EQ_CONS			7
 
+/* FCoE L2 connection completions */
+#define HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS		6
+#define HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS		4
 /* iSCSI L2 */
 #define HC_SP_INDEX_ETH_ISCSI_CQ_CONS		5
 #define HC_SP_INDEX_ETH_ISCSI_RX_CQ_CONS	1
 
+/* Special clients parameters */
+
+/* SB indices */
+/* FCoE L2 */
+#define BNX2X_FCOE_L2_RX_INDEX \
+	(&bp->def_status_blk->sp_sb.\
+	index_values[HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS])
+
+#define BNX2X_FCOE_L2_TX_INDEX \
+	(&bp->def_status_blk->sp_sb.\
+	index_values[HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS])
+
 /**
  *  CIDs and CLIDs:
  *  CLIDs below is a CLID for func 0, then the CLID for other
@@ -215,12 +235,19 @@ void bnx2x_panic_dump(struct bnx2x *bp);
 #define BNX2X_ISCSI_ETH_CL_ID		17
 #define BNX2X_ISCSI_ETH_CID		17
 
+/* FCoE L2 */
+#define BNX2X_FCOE_ETH_CL_ID		18
+#define BNX2X_FCOE_ETH_CID		18
+
 /** Additional rings budgeting */
 #ifdef BCM_CNIC
 #define CNIC_CONTEXT_USE		1
+#define FCOE_CONTEXT_USE		1
 #else
 #define CNIC_CONTEXT_USE		0
+#define FCOE_CONTEXT_USE		0
 #endif /* BCM_CNIC */
+#define NONE_ETH_CONTEXT_USE	(FCOE_CONTEXT_USE)
 
 #define AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR \
 	AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR
@@ -401,6 +428,17 @@ struct bnx2x_fastpath {
 };
 
 #define bnx2x_fp(bp, nr, var)		(bp->fp[nr].var)
+#ifdef BCM_CNIC
+/* FCoE L2 `fastpath' is right after the eth entries */
+#define FCOE_IDX			BNX2X_NUM_ETH_QUEUES(bp)
+#define bnx2x_fcoe_fp(bp)		(&bp->fp[FCOE_IDX])
+#define bnx2x_fcoe(bp, var)		(bnx2x_fcoe_fp(bp)->var)
+#define IS_FCOE_FP(fp)			(fp->index == FCOE_IDX)
+#define IS_FCOE_IDX(idx)		((idx) == FCOE_IDX)
+#else
+#define IS_FCOE_FP(fp)		false
+#define IS_FCOE_IDX(idx)	false
+#endif
 
 
 /* MC hsi */
@@ -669,8 +707,14 @@ struct bnx2x_port {
 enum {
 	CAM_ETH_LINE = 0,
 	CAM_ISCSI_ETH_LINE,
-	CAM_MAX_PF_LINE = CAM_ISCSI_ETH_LINE
+	CAM_FIP_ETH_LINE,
+	CAM_FIP_MCAST_LINE,
+	CAM_MAX_PF_LINE = CAM_FIP_MCAST_LINE
 };
+/* number of MACs per function in NIG memory - used for SI mode */
+#define NIG_LLH_FUNC_MEM_SIZE		16
+/* number of entries in NIG_REG_LLHX_FUNC_MEM */
+#define NIG_LLH_FUNC_MEM_MAX_OFFSET	8
 
 #define BNX2X_VF_ID_INVALID	0xFF
 
@@ -710,6 +754,14 @@ enum {
  */
 #define L2_FP_COUNT(cid_cnt)	((cid_cnt) - CNIC_CONTEXT_USE)
 
+/*
+ * The number of FP-SB allocated by the driver == max number of regular L2
+ * queues + 1 for the CNIC which also consumes an FP-SB
+ */
+#define FP_SB_COUNT(cid_cnt)	((cid_cnt) - FCOE_CONTEXT_USE)
+#define NUM_IGU_SB_REQUIRED(cid_cnt) \
+				(FP_SB_COUNT(cid_cnt) - NONE_ETH_CONTEXT_USE)
+
 union cdu_context {
 	struct eth_context eth;
 	char pad[1024];
@@ -722,7 +774,8 @@ union cdu_context {
 
 #ifdef BCM_CNIC
 #define CNIC_ISCSI_CID_MAX	256
-#define CNIC_CID_MAX		(CNIC_ISCSI_CID_MAX)
+#define CNIC_FCOE_CID_MAX	2048
+#define CNIC_CID_MAX		(CNIC_ISCSI_CID_MAX + CNIC_FCOE_CID_MAX)
 #define CNIC_ILT_LINES		DIV_ROUND_UP(CNIC_CID_MAX, ILT_PAGE_CIDS)
 #endif
 
@@ -770,6 +823,8 @@ struct bnx2x_slowpath {
 
 	u32				wb_comp;
 	u32				wb_data[4];
+	/* pfc configuration for DCBX ramrod */
+	struct flow_control_configuration pfc_config;
 };
 
 #define bnx2x_sp(bp, var)		(&bp->slowpath->var)
@@ -918,6 +973,10 @@ struct bnx2x {
 #define DISABLE_MSI_FLAG		0x200
 #define BP_NOMCP(bp)			(bp->flags & NO_MCP_FLAG)
 #define MF_FUNC_DIS			0x1000
+#define FCOE_MACS_SET			0x2000
+#define NO_FCOE_FLAG			0x4000
+
+#define NO_FCOE(bp)		((bp)->flags & NO_FCOE_FLAG)
 
 	int			pf_num;	/* absolute PF number */
 	int			pfid;	/* per-path PF number */
@@ -967,6 +1026,8 @@ struct bnx2x {
 	u16			mf_ov;
 	u8			mf_mode;
 #define IS_MF(bp)		(bp->mf_mode != 0)
+#define IS_MF_SI(bp)		(bp->mf_mode == MULTI_FUNCTION_SI)
+#define IS_MF_SD(bp)		(bp->mf_mode == MULTI_FUNCTION_SD)
 
 	u8			wol;
 
@@ -1010,6 +1071,7 @@ struct bnx2x {
 #define BNX2X_ACCEPT_ALL_UNICAST	0x0004
 #define BNX2X_ACCEPT_ALL_MULTICAST	0x0008
 #define BNX2X_ACCEPT_BROADCAST		0x0010
+#define BNX2X_ACCEPT_UNMATCHED_UCAST	0x0020
 #define BNX2X_PROMISCUOUS_MODE		0x10000
 
 	u32			rx_mode;
@@ -1062,7 +1124,8 @@ struct bnx2x {
 	u16			cnic_kwq_pending;
 	u16			cnic_spq_pending;
 	struct mutex		cnic_mutex;
-	u8			iscsi_mac[6];
+	u8			iscsi_mac[ETH_ALEN];
+	u8			fip_mac[ETH_ALEN];
 #endif
 
 	int			dmae_ready;
@@ -1122,6 +1185,31 @@ struct bnx2x {
 
 	char			fw_ver[32];
 	const struct firmware	*firmware;
+	/* LLDP params */
+	struct bnx2x_config_lldp_params		lldp_config_params;
+
+	/* DCB support on/off */
+	u16 dcb_state;
+#define BNX2X_DCB_STATE_OFF			0
+#define BNX2X_DCB_STATE_ON			1
+
+	/* DCBX engine mode */
+	int dcbx_enabled;
+#define BNX2X_DCBX_ENABLED_OFF			0
+#define BNX2X_DCBX_ENABLED_ON_NEG_OFF		1
+#define BNX2X_DCBX_ENABLED_ON_NEG_ON		2
+#define BNX2X_DCBX_ENABLED_INVALID		(-1)
+
+	bool dcbx_mode_uset;
+
+	struct bnx2x_config_dcbx_params		dcbx_config_params;
+
+	struct bnx2x_dcbx_port_params		dcbx_port_params;
+	int					dcb_version;
+
+	/* DCBX Negotation results */
+	struct dcbx_features			dcbx_local_feat;
+	u32					dcbx_error;
 };
 
 /**
@@ -1152,10 +1240,17 @@ struct bnx2x {
 #define RSS_IPV6_TCP_CAP	0x0008
 
 #define BNX2X_NUM_QUEUES(bp)	(bp->num_queues)
+#define BNX2X_NUM_ETH_QUEUES(bp) (BNX2X_NUM_QUEUES(bp) - NONE_ETH_CONTEXT_USE)
+
+/* ethtool statistics are displayed for all regular ethernet queues and the
+ * fcoe L2 queue if not disabled
+ */
+#define BNX2X_NUM_STAT_QUEUES(bp) (NO_FCOE(bp) ? BNX2X_NUM_ETH_QUEUES(bp) : \
+			   (BNX2X_NUM_ETH_QUEUES(bp) + FCOE_CONTEXT_USE))
+
 #define is_multi(bp)		(BNX2X_NUM_QUEUES(bp) > 1)
 
 #define BNX2X_MAX_QUEUES(bp)	(bp->igu_sb_cnt - CNIC_CONTEXT_USE)
-#define is_eth_multi(bp)	(BNX2X_NUM_ETH_QUEUES(bp) > 1)
 
 #define RSS_IPV4_CAP_MASK						\
 	TSTORM_ETH_FUNCTION_COMMON_CONFIG_RSS_IPV4_CAPABILITY
@@ -1248,6 +1343,7 @@ struct bnx2x_client_ramrod_params {
 	u16 cl_id;
 	u32 cid;
 	u8 poll;
+#define CLIENT_IS_FCOE			0x01
 #define CLIENT_IS_LEADING_RSS		0x02
 	u8 flags;
 };
@@ -1280,11 +1376,54 @@ struct bnx2x_func_init_params {
 	u16		spq_prod;	/* valid iff FUNC_FLG_SPQ */
 };
 
+#define for_each_eth_queue(bp, var) \
+			for (var = 0; var < BNX2X_NUM_ETH_QUEUES(bp); var++)
+
+#define for_each_nondefault_eth_queue(bp, var) \
+			for (var = 1; var < BNX2X_NUM_ETH_QUEUES(bp); var++)
+
+#define for_each_napi_queue(bp, var) \
+	for (var = 0; \
+		var < BNX2X_NUM_ETH_QUEUES(bp) + FCOE_CONTEXT_USE; var++) \
+		if (skip_queue(bp, var))	\
+			continue;		\
+		else
+
 #define for_each_queue(bp, var) \
-			for (var = 0; var < BNX2X_NUM_QUEUES(bp); var++)
+	for (var = 0; var < BNX2X_NUM_QUEUES(bp); var++) \
+		if (skip_queue(bp, var))	\
+			continue;		\
+		else
+
+#define for_each_rx_queue(bp, var) \
+	for (var = 0; var < BNX2X_NUM_QUEUES(bp); var++) \
+		if (skip_rx_queue(bp, var))	\
+			continue;		\
+		else
+
+#define for_each_tx_queue(bp, var) \
+	for (var = 0; var < BNX2X_NUM_QUEUES(bp); var++) \
+		if (skip_tx_queue(bp, var))	\
+			continue;		\
+		else
+
 #define for_each_nondefault_queue(bp, var) \
-			for (var = 1; var < BNX2X_NUM_QUEUES(bp); var++)
+	for (var = 1; var < BNX2X_NUM_QUEUES(bp); var++) \
+		if (skip_queue(bp, var))	\
+			continue;		\
+		else
+
+/* skip rx queue
+ * if FCOE l2 support is diabled and this is the fcoe L2 queue
+ */
+#define skip_rx_queue(bp, idx)	(NO_FCOE(bp) && IS_FCOE_IDX(idx))
 
+/* skip tx queue
+ * if FCOE l2 support is diabled and this is the fcoe L2 queue
+ */
+#define skip_tx_queue(bp, idx)	(NO_FCOE(bp) && IS_FCOE_IDX(idx))
+
+#define skip_queue(bp, idx)	(NO_FCOE(bp) && IS_FCOE_IDX(idx))
 
 #define WAIT_RAMROD_POLL	0x01
 #define WAIT_RAMROD_COMMON	0x02
@@ -1329,7 +1468,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 
 #define BNX2X_ILT_ZALLOC(x, y, size) \
 	do { \
-		x = pci_alloc_consistent(bp->pdev, size, y); \
+		x = dma_alloc_coherent(&bp->pdev->dev, size, y, GFP_KERNEL); \
 		if (x) \
 			memset(x, 0, size); \
 	} while (0)
@@ -1337,7 +1476,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 #define BNX2X_ILT_FREE(x, y, size) \
 	do { \
 		if (x) { \
-			pci_free_consistent(bp->pdev, size, x, y); \
+			dma_free_coherent(&bp->pdev->dev, size, x, y); \
 			x = NULL; \
 			y = 0; \
 		} \
@@ -1608,10 +1747,6 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms,
 	MAC_CONFIGURATION_ENTRY_ACTION_TYPE) == \
 	(T_ETH_MAC_COMMAND_INVALIDATE))
 
-#define CAM_INVALIDATE(x) \
-	(x.target_table_entry.flags = TSTORM_CAM_TARGET_TABLE_ENTRY_ACTION_TYPE)
-
-
 /* Number of u32 elements in MC hash array */
 #define MC_HASH_SIZE			8
 #define MC_HASH_OFFSET(bp, i)		(BAR_TSTRORM_INTMEM + \
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index 459614d2d7b..710ce5d04c5 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -698,6 +698,29 @@ void bnx2x_release_phy_lock(struct bnx2x *bp)
 	mutex_unlock(&bp->port.phy_mutex);
 }
 
+/* calculates MF speed according to current linespeed and MF configuration */
+u16 bnx2x_get_mf_speed(struct bnx2x *bp)
+{
+	u16 line_speed = bp->link_vars.line_speed;
+	if (IS_MF(bp)) {
+		u16 maxCfg = (bp->mf_config[BP_VN(bp)] &
+						FUNC_MF_CFG_MAX_BW_MASK) >>
+						FUNC_MF_CFG_MAX_BW_SHIFT;
+		/* Calculate the current MAX line speed limit for the DCC
+		 * capable devices
+		 */
+		if (IS_MF_SD(bp)) {
+			u16 vn_max_rate = maxCfg * 100;
+
+			if (vn_max_rate < line_speed)
+				line_speed = vn_max_rate;
+		} else /* IS_MF_SI(bp)) */
+			line_speed = (line_speed * maxCfg) / 100;
+	}
+
+	return line_speed;
+}
+
 void bnx2x_link_report(struct bnx2x *bp)
 {
 	if (bp->flags & MF_FUNC_DIS) {
@@ -713,17 +736,8 @@ void bnx2x_link_report(struct bnx2x *bp)
 			netif_carrier_on(bp->dev);
 		netdev_info(bp->dev, "NIC Link is Up, ");
 
-		line_speed = bp->link_vars.line_speed;
-		if (IS_MF(bp)) {
-			u16 vn_max_rate;
+		line_speed = bnx2x_get_mf_speed(bp);
 
-			vn_max_rate =
-				((bp->mf_config[BP_VN(bp)] &
-				  FUNC_MF_CFG_MAX_BW_MASK) >>
-						FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
-			if (vn_max_rate < line_speed)
-				line_speed = vn_max_rate;
-		}
 		pr_cont("%d Mbps ", line_speed);
 
 		if (bp->link_vars.duplex == DUPLEX_FULL)
@@ -813,7 +827,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
 	DP(NETIF_MSG_IFUP,
 	   "mtu %d  rx_buf_size %d\n", bp->dev->mtu, bp->rx_buf_size);
 
-	for_each_queue(bp, j) {
+	for_each_rx_queue(bp, j) {
 		struct bnx2x_fastpath *fp = &bp->fp[j];
 
 		if (!fp->disable_tpa) {
@@ -866,7 +880,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp)
 		}
 	}
 
-	for_each_queue(bp, j) {
+	for_each_rx_queue(bp, j) {
 		struct bnx2x_fastpath *fp = &bp->fp[j];
 
 		fp->rx_bd_cons = 0;
@@ -897,7 +911,7 @@ static void bnx2x_free_tx_skbs(struct bnx2x *bp)
 {
 	int i;
 
-	for_each_queue(bp, i) {
+	for_each_tx_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		u16 bd_cons = fp->tx_bd_cons;
@@ -915,7 +929,7 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp)
 {
 	int i, j;
 
-	for_each_queue(bp, j) {
+	for_each_rx_queue(bp, j) {
 		struct bnx2x_fastpath *fp = &bp->fp[j];
 
 		for (i = 0; i < NUM_RX_BD; i++) {
@@ -956,7 +970,7 @@ static void bnx2x_free_msix_irqs(struct bnx2x *bp)
 #ifdef BCM_CNIC
 	offset++;
 #endif
-	for_each_queue(bp, i) {
+	for_each_eth_queue(bp, i) {
 		DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq  "
 		   "state %x\n", i, bp->msix_table[i + offset].vector,
 		   bnx2x_fp(bp, i, state));
@@ -990,14 +1004,14 @@ int bnx2x_enable_msix(struct bnx2x *bp)
 	   bp->msix_table[msix_vec].entry, bp->msix_table[msix_vec].entry);
 	msix_vec++;
 #endif
-	for_each_queue(bp, i) {
+	for_each_eth_queue(bp, i) {
 		bp->msix_table[msix_vec].entry = msix_vec;
 		DP(NETIF_MSG_IFUP, "msix_table[%d].entry = %d "
 		   "(fastpath #%u)\n", msix_vec, msix_vec, i);
 		msix_vec++;
 	}
 
-	req_cnt = BNX2X_NUM_QUEUES(bp) + CNIC_CONTEXT_USE + 1;
+	req_cnt = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_CONTEXT_USE + 1;
 
 	rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], req_cnt);
 
@@ -1053,7 +1067,7 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
 #ifdef BCM_CNIC
 	offset++;
 #endif
-	for_each_queue(bp, i) {
+	for_each_eth_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 		snprintf(fp->name, sizeof(fp->name), "%s-fp-%d",
 			 bp->dev->name, i);
@@ -1070,7 +1084,7 @@ static int bnx2x_req_msix_irqs(struct bnx2x *bp)
 		fp->state = BNX2X_FP_STATE_IRQ;
 	}
 
-	i = BNX2X_NUM_QUEUES(bp);
+	i = BNX2X_NUM_ETH_QUEUES(bp);
 	offset = 1 + CNIC_CONTEXT_USE;
 	netdev_info(bp->dev, "using MSI-X  IRQs: sp %d  fp[%d] %d"
 	       " ... fp[%d] %d\n",
@@ -1117,7 +1131,7 @@ static void bnx2x_napi_enable(struct bnx2x *bp)
 {
 	int i;
 
-	for_each_queue(bp, i)
+	for_each_napi_queue(bp, i)
 		napi_enable(&bnx2x_fp(bp, i, napi));
 }
 
@@ -1125,7 +1139,7 @@ static void bnx2x_napi_disable(struct bnx2x *bp)
 {
 	int i;
 
-	for_each_queue(bp, i)
+	for_each_napi_queue(bp, i)
 		napi_disable(&bnx2x_fp(bp, i, napi));
 }
 
@@ -1153,6 +1167,35 @@ void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw)
 	netif_tx_disable(bp->dev);
 }
 
+u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+#ifdef BCM_CNIC
+	struct bnx2x *bp = netdev_priv(dev);
+	if (NO_FCOE(bp))
+		return skb_tx_hash(dev, skb);
+	else {
+		struct ethhdr *hdr = (struct ethhdr *)skb->data;
+		u16 ether_type = ntohs(hdr->h_proto);
+
+		/* Skip VLAN tag if present */
+		if (ether_type == ETH_P_8021Q) {
+			struct vlan_ethhdr *vhdr =
+				(struct vlan_ethhdr *)skb->data;
+
+			ether_type = ntohs(vhdr->h_vlan_encapsulated_proto);
+		}
+
+		/* If ethertype is FCoE or FIP - use FCoE ring */
+		if ((ether_type == ETH_P_FCOE) || (ether_type == ETH_P_FIP))
+			return bnx2x_fcoe(bp, index);
+	}
+#endif
+	/* Select a none-FCoE queue:  if FCoE is enabled, exclude FCoE L2 ring
+	 */
+	return __skb_tx_hash(dev, skb,
+			dev->real_num_tx_queues - FCOE_CONTEXT_USE);
+}
+
 void bnx2x_set_num_queues(struct bnx2x *bp)
 {
 	switch (bp->multi_mode) {
@@ -1167,8 +1210,23 @@ void bnx2x_set_num_queues(struct bnx2x *bp)
 		bp->num_queues = 1;
 		break;
 	}
+
+	/* Add special queues */
+	bp->num_queues += NONE_ETH_CONTEXT_USE;
 }
 
+#ifdef BCM_CNIC
+static inline void bnx2x_set_fcoe_eth_macs(struct bnx2x *bp)
+{
+	if (!NO_FCOE(bp)) {
+		if (!IS_MF_SD(bp))
+			bnx2x_set_fip_eth_mac_addr(bp, 1);
+		bnx2x_set_all_enode_macs(bp, 1);
+		bp->flags |= FCOE_MACS_SET;
+	}
+}
+#endif
+
 static void bnx2x_release_firmware(struct bnx2x *bp)
 {
 	kfree(bp->init_ops_offsets);
@@ -1177,6 +1235,20 @@ static void bnx2x_release_firmware(struct bnx2x *bp)
 	release_firmware(bp->firmware);
 }
 
+static inline int bnx2x_set_real_num_queues(struct bnx2x *bp)
+{
+	int rc, num = bp->num_queues;
+
+#ifdef BCM_CNIC
+	if (NO_FCOE(bp))
+		num -= FCOE_CONTEXT_USE;
+
+#endif
+	netif_set_real_num_tx_queues(bp->dev, num);
+	rc = netif_set_real_num_rx_queues(bp->dev, num);
+	return rc;
+}
+
 /* must be called with rtnl_lock */
 int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 {
@@ -1203,10 +1275,9 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	if (bnx2x_alloc_mem(bp))
 		return -ENOMEM;
 
-	netif_set_real_num_tx_queues(bp->dev, bp->num_queues);
-	rc = netif_set_real_num_rx_queues(bp->dev, bp->num_queues);
+	rc = bnx2x_set_real_num_queues(bp);
 	if (rc) {
-		BNX2X_ERR("Unable to update real_num_rx_queues\n");
+		BNX2X_ERR("Unable to set real_num_queues\n");
 		goto load_error0;
 	}
 
@@ -1214,6 +1285,10 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		bnx2x_fp(bp, i, disable_tpa) =
 					((bp->flags & TPA_ENABLE_FLAG) == 0);
 
+#ifdef BCM_CNIC
+	/* We don't want TPA on FCoE L2 ring */
+	bnx2x_fcoe(bp, disable_tpa) = 1;
+#endif
 	bnx2x_napi_enable(bp);
 
 	/* Send LOAD_REQUEST command to MCP
@@ -1296,6 +1371,8 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		}
 	}
 
+	bnx2x_dcbx_init(bp);
+
 	bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
 
 	rc = bnx2x_func_start(bp);
@@ -1344,6 +1421,10 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	/* Now when Clients are configured we are ready to work */
 	bp->state = BNX2X_STATE_OPEN;
 
+#ifdef BCM_CNIC
+	bnx2x_set_fcoe_eth_macs(bp);
+#endif
+
 	bnx2x_set_eth_mac(bp, 1);
 
 	if (bp->port.pmf)
@@ -1402,7 +1483,7 @@ load_error3:
 
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
-	for_each_queue(bp, i)
+	for_each_rx_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 
 	/* Release IRQs */
@@ -1473,7 +1554,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
-	for_each_queue(bp, i)
+	for_each_rx_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 
 	bnx2x_free_mem(bp);
@@ -1577,6 +1658,17 @@ int bnx2x_poll(struct napi_struct *napi, int budget)
 
 		/* Fall out from the NAPI loop if needed */
 		if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) {
+#ifdef BCM_CNIC
+			/* No need to update SB for FCoE L2 ring as long as
+			 * it's connected to the default SB and the SB
+			 * has been updated when NAPI was scheduled.
+			 */
+			if (IS_FCOE_FP(fp)) {
+				napi_complete(napi);
+				break;
+			}
+#endif
+
 			bnx2x_update_fpsb_idx(fp);
 			/* bnx2x_has_rx_work() reads the status block,
 			 * thus we need to ensure that status block indices
@@ -1680,7 +1772,7 @@ static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
 		rc = XMIT_PLAIN;
 
 	else {
-		if (skb->protocol == htons(ETH_P_IPV6)) {
+		if (vlan_get_protocol(skb) == htons(ETH_P_IPV6)) {
 			rc = XMIT_CSUM_V6;
 			if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
 				rc |= XMIT_CSUM_TCP;
@@ -1692,11 +1784,10 @@ static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb)
 		}
 	}
 
-	if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
-		rc |= (XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP);
-
-	else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
-		rc |= (XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6);
+	if (skb_is_gso_v6(skb))
+		rc |= XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6;
+	else if (skb_is_gso(skb))
+		rc |= XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP;
 
 	return rc;
 }
@@ -1782,15 +1873,15 @@ exit_lbl:
 }
 #endif
 
-static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb,
-				     struct eth_tx_parse_bd_e2 *pbd,
-				     u32 xmit_type)
+static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data,
+					u32 xmit_type)
 {
-	pbd->parsing_data |= cpu_to_le16(skb_shinfo(skb)->gso_size) <<
-		ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT;
+	*parsing_data |= (skb_shinfo(skb)->gso_size <<
+			      ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) &
+			      ETH_TX_PARSE_BD_E2_LSO_MSS;
 	if ((xmit_type & XMIT_GSO_V6) &&
 	    (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
-		pbd->parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
+		*parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
 }
 
 /**
@@ -1835,15 +1926,15 @@ static inline void bnx2x_set_pbd_gso(struct sk_buff *skb,
  * @return header len
  */
 static inline  u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
-	struct eth_tx_parse_bd_e2 *pbd,
-	u32 xmit_type)
+	u32 *parsing_data, u32 xmit_type)
 {
-	pbd->parsing_data |= cpu_to_le16(tcp_hdrlen(skb)/4) <<
-		ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT;
+	*parsing_data |= ((tcp_hdrlen(skb)/4) <<
+		ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
+		ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
 
-	pbd->parsing_data |= cpu_to_le16(((unsigned char *)tcp_hdr(skb) -
-					  skb->data) / 2) <<
-		ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT;
+	*parsing_data |= ((((u8 *)tcp_hdr(skb) - skb->data) / 2) <<
+		ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
+		ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
 
 	return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
 }
@@ -1912,6 +2003,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL;
 	struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
 	struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
+	u32 pbd_e2_parsing_data = 0;
 	u16 pkt_prod, bd_prod;
 	int nbd, fp_index;
 	dma_addr_t mapping;
@@ -2033,8 +2125,9 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
 		/* Set PBD in checksum offload case */
 		if (xmit_type & XMIT_CSUM)
-			hlen = bnx2x_set_pbd_csum_e2(bp,
-						     skb, pbd_e2, xmit_type);
+			hlen = bnx2x_set_pbd_csum_e2(bp, skb,
+						     &pbd_e2_parsing_data,
+						     xmit_type);
 	} else {
 		pbd_e1x = &fp->tx_desc_ring[bd_prod].parse_bd_e1x;
 		memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
@@ -2076,10 +2169,18 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			bd_prod = bnx2x_tx_split(bp, fp, tx_buf, &tx_start_bd,
 						 hlen, bd_prod, ++nbd);
 		if (CHIP_IS_E2(bp))
-			bnx2x_set_pbd_gso_e2(skb, pbd_e2, xmit_type);
+			bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
+					     xmit_type);
 		else
 			bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type);
 	}
+
+	/* Set the PBD's parsing_data field if not zero
+	 * (for the chips newer than 57711).
+	 */
+	if (pbd_e2_parsing_data)
+		pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data);
+
 	tx_data_bd = (struct eth_tx_bd *)tx_start_bd;
 
 	/* Handle fragmented skb */
@@ -2232,7 +2333,7 @@ int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp)
 	bp->fp = fp;
 
 	/* msix table */
-	tbl = kzalloc((bp->l2_cid_count + 1) * sizeof(*tbl),
+	tbl = kzalloc((FP_SB_COUNT(bp->l2_cid_count) + 1) * sizeof(*tbl),
 				  GFP_KERNEL);
 	if (!tbl)
 		goto alloc_err;
diff --git a/drivers/net/bnx2x/bnx2x_cmn.h b/drivers/net/bnx2x/bnx2x_cmn.h
index 6b28739c530..03eb4d68e6b 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.h
+++ b/drivers/net/bnx2x/bnx2x_cmn.h
@@ -73,6 +73,16 @@ void bnx2x__link_status_update(struct bnx2x *bp);
 void bnx2x_link_report(struct bnx2x *bp);
 
 /**
+ * calculates MF speed according to current linespeed and MF
+ * configuration
+ *
+ * @param bp
+ *
+ * @return u16
+ */
+u16 bnx2x_get_mf_speed(struct bnx2x *bp);
+
+/**
  * MSI-X slowpath interrupt handler
  *
  * @param irq
@@ -232,6 +242,30 @@ int bnx2x_release_hw_lock(struct bnx2x *bp, u32 resource);
  */
 void bnx2x_set_eth_mac(struct bnx2x *bp, int set);
 
+#ifdef BCM_CNIC
+/**
+ * Set/Clear FIP MAC(s) at the next enties in the CAM after the ETH
+ * MAC(s). This function will wait until the ramdord completion
+ * returns.
+ *
+ * @param bp driver handle
+ * @param set set or clear the CAM entry
+ *
+ * @return 0 if cussess, -ENODEV if ramrod doesn't return.
+ */
+int bnx2x_set_fip_eth_mac_addr(struct bnx2x *bp, int set);
+
+/**
+ * Set/Clear ALL_ENODE mcast MAC.
+ *
+ * @param bp
+ * @param set
+ *
+ * @return int
+ */
+int bnx2x_set_all_enode_macs(struct bnx2x *bp, int set);
+#endif
+
 /**
  * Set MAC filtering configurations.
  *
@@ -290,6 +324,13 @@ int bnx2x_func_start(struct bnx2x *bp);
 void bnx2x_ilt_set_info(struct bnx2x *bp);
 
 /**
+ * Inintialize dcbx protocol
+ *
+ * @param bp
+ */
+void bnx2x_dcbx_init(struct bnx2x *bp);
+
+/**
  * Set power state to the requested value. Currently only D0 and
  * D3hot are supported.
  *
@@ -309,6 +350,9 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode);
 /* hard_xmit callback */
 netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev);
 
+/* select_queue callback */
+u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb);
+
 int bnx2x_change_mac_addr(struct net_device *dev, void *p);
 
 /* NAPI poll Rx part */
@@ -685,7 +729,7 @@ static inline void bnx2x_add_all_napi(struct bnx2x *bp)
 	int i;
 
 	/* Add NAPI objects */
-	for_each_queue(bp, i)
+	for_each_napi_queue(bp, i)
 		netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi),
 			       bnx2x_poll, BNX2X_NAPI_WEIGHT);
 }
@@ -694,7 +738,7 @@ static inline void bnx2x_del_all_napi(struct bnx2x *bp)
 {
 	int i;
 
-	for_each_queue(bp, i)
+	for_each_napi_queue(bp, i)
 		netif_napi_del(&bnx2x_fp(bp, i, napi));
 }
 
@@ -860,7 +904,7 @@ static inline void bnx2x_init_tx_rings(struct bnx2x *bp)
 {
 	int i, j;
 
-	for_each_queue(bp, j) {
+	for_each_tx_queue(bp, j) {
 		struct bnx2x_fastpath *fp = &bp->fp[j];
 
 		for (i = 1; i <= NUM_TX_RINGS; i++) {
@@ -939,7 +983,30 @@ static inline void bnx2x_set_next_page_rx_cq(struct bnx2x_fastpath *fp)
 	}
 }
 
+#ifdef BCM_CNIC
+static inline void bnx2x_init_fcoe_fp(struct bnx2x *bp)
+{
+	bnx2x_fcoe(bp, cl_id) = BNX2X_FCOE_ETH_CL_ID +
+		BP_E1HVN(bp) * NONE_ETH_CONTEXT_USE;
+	bnx2x_fcoe(bp, cid) = BNX2X_FCOE_ETH_CID;
+	bnx2x_fcoe(bp, fw_sb_id) = DEF_SB_ID;
+	bnx2x_fcoe(bp, igu_sb_id) = bp->igu_dsb_id;
+	bnx2x_fcoe(bp, bp) = bp;
+	bnx2x_fcoe(bp, state) = BNX2X_FP_STATE_CLOSED;
+	bnx2x_fcoe(bp, index) = FCOE_IDX;
+	bnx2x_fcoe(bp, rx_cons_sb) = BNX2X_FCOE_L2_RX_INDEX;
+	bnx2x_fcoe(bp, tx_cons_sb) = BNX2X_FCOE_L2_TX_INDEX;
+	/* qZone id equals to FW (per path) client id */
+	bnx2x_fcoe(bp, cl_qzone_id) = bnx2x_fcoe(bp, cl_id) +
+		BP_PORT(bp)*(CHIP_IS_E2(bp) ? ETH_MAX_RX_CLIENTS_E2 :
+				ETH_MAX_RX_CLIENTS_E1H);
+	/* init shortcut */
+	bnx2x_fcoe(bp, ustorm_rx_prods_offset) = CHIP_IS_E2(bp) ?
+	    USTORM_RX_PRODS_E2_OFFSET(bnx2x_fcoe(bp, cl_qzone_id)) :
+	    USTORM_RX_PRODS_E1X_OFFSET(BP_PORT(bp), bnx2x_fcoe_fp(bp)->cl_id);
 
+}
+#endif
 
 static inline void __storm_memset_struct(struct bnx2x *bp,
 					 u32 addr, size_t size, u32 *data)
diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/bnx2x/bnx2x_dcb.c
new file mode 100644
index 00000000000..fb60021f81f
--- /dev/null
+++ b/drivers/net/bnx2x/bnx2x_dcb.c
@@ -0,0 +1,2118 @@
+/* bnx2x_dcb.c: Broadcom Everest network driver.
+ *
+ * Copyright 2009-2010 Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Dmitry Kravkov
+ *
+ */
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+
+#include "bnx2x.h"
+#include "bnx2x_cmn.h"
+#include "bnx2x_dcb.h"
+
+
+/* forward declarations of dcbx related functions */
+static void bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp);
+static void bnx2x_pfc_set_pfc(struct bnx2x *bp);
+static void bnx2x_dcbx_update_ets_params(struct bnx2x *bp);
+static void bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp);
+static void bnx2x_dcbx_get_ets_pri_pg_tbl(struct bnx2x *bp,
+					  u32 *set_configuration_ets_pg,
+					  u32 *pri_pg_tbl);
+static void bnx2x_dcbx_get_num_pg_traf_type(struct bnx2x *bp,
+					    u32 *pg_pri_orginal_spread,
+					    struct pg_help_data *help_data);
+static void bnx2x_dcbx_fill_cos_params(struct bnx2x *bp,
+				       struct pg_help_data *help_data,
+				       struct dcbx_ets_feature *ets,
+				       u32 *pg_pri_orginal_spread);
+static void bnx2x_dcbx_separate_pauseable_from_non(struct bnx2x *bp,
+				struct cos_help_data *cos_data,
+				u32 *pg_pri_orginal_spread,
+				struct dcbx_ets_feature *ets);
+static void bnx2x_pfc_fw_struct_e2(struct bnx2x *bp);
+
+
+static void bnx2x_pfc_set(struct bnx2x *bp)
+{
+	struct bnx2x_nig_brb_pfc_port_params pfc_params = {0};
+	u32 pri_bit, val = 0;
+	u8 pri;
+
+	/* Tx COS configuration */
+	if (bp->dcbx_port_params.ets.cos_params[0].pauseable)
+		pfc_params.rx_cos0_priority_mask =
+			bp->dcbx_port_params.ets.cos_params[0].pri_bitmask;
+	if (bp->dcbx_port_params.ets.cos_params[1].pauseable)
+		pfc_params.rx_cos1_priority_mask =
+			bp->dcbx_port_params.ets.cos_params[1].pri_bitmask;
+
+
+	/**
+	 * Rx COS configuration
+	 * Changing PFC RX configuration .
+	 * In RX COS0 will always be configured to lossy and COS1 to lossless
+	 */
+	for (pri = 0 ; pri < MAX_PFC_PRIORITIES ; pri++) {
+		pri_bit = 1 << pri;
+
+		if (pri_bit & DCBX_PFC_PRI_PAUSE_MASK(bp))
+			val |= 1 << (pri * 4);
+	}
+
+	pfc_params.pkt_priority_to_cos = val;
+
+	/* RX COS0 */
+	pfc_params.llfc_low_priority_classes = 0;
+	/* RX COS1 */
+	pfc_params.llfc_high_priority_classes = DCBX_PFC_PRI_PAUSE_MASK(bp);
+
+	/* BRB configuration */
+	pfc_params.cos0_pauseable = false;
+	pfc_params.cos1_pauseable = true;
+
+	bnx2x_acquire_phy_lock(bp);
+	bp->link_params.feature_config_flags |= FEATURE_CONFIG_PFC_ENABLED;
+	bnx2x_update_pfc(&bp->link_params, &bp->link_vars, &pfc_params);
+	bnx2x_release_phy_lock(bp);
+}
+
+static void bnx2x_pfc_clear(struct bnx2x *bp)
+{
+	struct bnx2x_nig_brb_pfc_port_params nig_params = {0};
+	nig_params.pause_enable = 1;
+#ifdef BNX2X_SAFC
+	if (bp->flags & SAFC_TX_FLAG) {
+		u32 high = 0, low = 0;
+		int i;
+
+		for (i = 0; i < BNX2X_MAX_PRIORITY; i++) {
+			if (bp->pri_map[i] == 1)
+				high |= (1 << i);
+			if (bp->pri_map[i] == 0)
+				low |= (1 << i);
+		}
+
+		nig_params.llfc_low_priority_classes = high;
+		nig_params.llfc_low_priority_classes = low;
+
+		nig_params.pause_enable = 0;
+		nig_params.llfc_enable = 1;
+		nig_params.llfc_out_en = 1;
+	}
+#endif /* BNX2X_SAFC */
+	bnx2x_acquire_phy_lock(bp);
+	bp->link_params.feature_config_flags &= ~FEATURE_CONFIG_PFC_ENABLED;
+	bnx2x_update_pfc(&bp->link_params, &bp->link_vars, &nig_params);
+	bnx2x_release_phy_lock(bp);
+}
+
+static void  bnx2x_dump_dcbx_drv_param(struct bnx2x *bp,
+				       struct dcbx_features *features,
+				       u32 error)
+{
+	u8 i = 0;
+	DP(NETIF_MSG_LINK, "local_mib.error %x\n", error);
+
+	/* PG */
+	DP(NETIF_MSG_LINK,
+	   "local_mib.features.ets.enabled %x\n", features->ets.enabled);
+	for (i = 0; i < DCBX_MAX_NUM_PG_BW_ENTRIES; i++)
+		DP(NETIF_MSG_LINK,
+		   "local_mib.features.ets.pg_bw_tbl[%d] %d\n", i,
+		   DCBX_PG_BW_GET(features->ets.pg_bw_tbl, i));
+	for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES; i++)
+		DP(NETIF_MSG_LINK,
+		   "local_mib.features.ets.pri_pg_tbl[%d] %d\n", i,
+		   DCBX_PRI_PG_GET(features->ets.pri_pg_tbl, i));
+
+	/* pfc */
+	DP(NETIF_MSG_LINK, "dcbx_features.pfc.pri_en_bitmap %x\n",
+					features->pfc.pri_en_bitmap);
+	DP(NETIF_MSG_LINK, "dcbx_features.pfc.pfc_caps %x\n",
+					features->pfc.pfc_caps);
+	DP(NETIF_MSG_LINK, "dcbx_features.pfc.enabled %x\n",
+					features->pfc.enabled);
+
+	DP(NETIF_MSG_LINK, "dcbx_features.app.default_pri %x\n",
+					features->app.default_pri);
+	DP(NETIF_MSG_LINK, "dcbx_features.app.tc_supported %x\n",
+					features->app.tc_supported);
+	DP(NETIF_MSG_LINK, "dcbx_features.app.enabled %x\n",
+					features->app.enabled);
+	for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++) {
+		DP(NETIF_MSG_LINK,
+		   "dcbx_features.app.app_pri_tbl[%x].app_id %x\n",
+		   i, features->app.app_pri_tbl[i].app_id);
+		DP(NETIF_MSG_LINK,
+		   "dcbx_features.app.app_pri_tbl[%x].pri_bitmap %x\n",
+		   i, features->app.app_pri_tbl[i].pri_bitmap);
+		DP(NETIF_MSG_LINK,
+		   "dcbx_features.app.app_pri_tbl[%x].appBitfield %x\n",
+		   i, features->app.app_pri_tbl[i].appBitfield);
+	}
+}
+
+static void bnx2x_dcbx_get_ap_priority(struct bnx2x *bp,
+				       u8 pri_bitmap,
+				       u8 llfc_traf_type)
+{
+	u32 pri = MAX_PFC_PRIORITIES;
+	u32 index = MAX_PFC_PRIORITIES - 1;
+	u32 pri_mask;
+	u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority;
+
+	/* Choose the highest priority */
+	while ((MAX_PFC_PRIORITIES == pri) && (0 != index)) {
+		pri_mask = 1 << index;
+		if (GET_FLAGS(pri_bitmap, pri_mask))
+			pri = index ;
+		index--;
+	}
+
+	if (pri < MAX_PFC_PRIORITIES)
+		ttp[llfc_traf_type] = max_t(u32, ttp[llfc_traf_type], pri);
+}
+
+static void bnx2x_dcbx_get_ap_feature(struct bnx2x *bp,
+				   struct dcbx_app_priority_feature *app,
+				   u32 error) {
+	u8 index;
+	u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority;
+
+	if (GET_FLAGS(error, DCBX_LOCAL_APP_ERROR))
+		DP(NETIF_MSG_LINK, "DCBX_LOCAL_APP_ERROR\n");
+
+	if (app->enabled && !GET_FLAGS(error, DCBX_LOCAL_APP_ERROR)) {
+
+		bp->dcbx_port_params.app.enabled = true;
+
+		for (index = 0 ; index < LLFC_DRIVER_TRAFFIC_TYPE_MAX; index++)
+			ttp[index] = 0;
+
+		if (app->default_pri < MAX_PFC_PRIORITIES)
+			ttp[LLFC_TRAFFIC_TYPE_NW] = app->default_pri;
+
+		for (index = 0 ; index < DCBX_MAX_APP_PROTOCOL; index++) {
+			struct dcbx_app_priority_entry *entry =
+							app->app_pri_tbl;
+
+			if (GET_FLAGS(entry[index].appBitfield,
+				     DCBX_APP_SF_ETH_TYPE) &&
+			   ETH_TYPE_FCOE == entry[index].app_id)
+				bnx2x_dcbx_get_ap_priority(bp,
+						entry[index].pri_bitmap,
+						LLFC_TRAFFIC_TYPE_FCOE);
+
+			if (GET_FLAGS(entry[index].appBitfield,
+				     DCBX_APP_SF_PORT) &&
+			   TCP_PORT_ISCSI == entry[index].app_id)
+				bnx2x_dcbx_get_ap_priority(bp,
+						entry[index].pri_bitmap,
+						LLFC_TRAFFIC_TYPE_ISCSI);
+		}
+	} else {
+		DP(NETIF_MSG_LINK, "DCBX_LOCAL_APP_DISABLED\n");
+		bp->dcbx_port_params.app.enabled = false;
+		for (index = 0 ; index < LLFC_DRIVER_TRAFFIC_TYPE_MAX; index++)
+			ttp[index] = INVALID_TRAFFIC_TYPE_PRIORITY;
+	}
+}
+
+static void bnx2x_dcbx_get_ets_feature(struct bnx2x *bp,
+				       struct dcbx_ets_feature *ets,
+				       u32 error) {
+	int i = 0;
+	u32 pg_pri_orginal_spread[DCBX_MAX_NUM_PG_BW_ENTRIES] = {0};
+	struct pg_help_data pg_help_data;
+	struct bnx2x_dcbx_cos_params *cos_params =
+			bp->dcbx_port_params.ets.cos_params;
+
+	memset(&pg_help_data, 0, sizeof(struct pg_help_data));
+
+
+	if (GET_FLAGS(error, DCBX_LOCAL_ETS_ERROR))
+		DP(NETIF_MSG_LINK, "DCBX_LOCAL_ETS_ERROR\n");
+
+
+	/* Clean up old settings of ets on COS */
+	for (i = 0; i < E2_NUM_OF_COS ; i++) {
+
+		cos_params[i].pauseable = false;
+		cos_params[i].strict = BNX2X_DCBX_COS_NOT_STRICT;
+		cos_params[i].bw_tbl = DCBX_INVALID_COS_BW;
+		cos_params[i].pri_bitmask = DCBX_PFC_PRI_GET_NON_PAUSE(bp, 0);
+	}
+
+	if (bp->dcbx_port_params.app.enabled &&
+	   !GET_FLAGS(error, DCBX_LOCAL_ETS_ERROR) &&
+	   ets->enabled) {
+		DP(NETIF_MSG_LINK, "DCBX_LOCAL_ETS_ENABLE\n");
+		bp->dcbx_port_params.ets.enabled = true;
+
+		bnx2x_dcbx_get_ets_pri_pg_tbl(bp,
+					      pg_pri_orginal_spread,
+					      ets->pri_pg_tbl);
+
+		bnx2x_dcbx_get_num_pg_traf_type(bp,
+						pg_pri_orginal_spread,
+						&pg_help_data);
+
+		bnx2x_dcbx_fill_cos_params(bp, &pg_help_data,
+					   ets, pg_pri_orginal_spread);
+
+	} else {
+		DP(NETIF_MSG_LINK, "DCBX_LOCAL_ETS_DISABLED\n");
+		bp->dcbx_port_params.ets.enabled = false;
+		ets->pri_pg_tbl[0] = 0;
+
+		for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES ; i++)
+			DCBX_PG_BW_SET(ets->pg_bw_tbl, i, 1);
+	}
+}
+
+static void  bnx2x_dcbx_get_pfc_feature(struct bnx2x *bp,
+					struct dcbx_pfc_feature *pfc, u32 error)
+{
+
+	if (GET_FLAGS(error, DCBX_LOCAL_PFC_ERROR))
+		DP(NETIF_MSG_LINK, "DCBX_LOCAL_PFC_ERROR\n");
+
+	if (bp->dcbx_port_params.app.enabled &&
+	   !GET_FLAGS(error, DCBX_LOCAL_PFC_ERROR) &&
+	   pfc->enabled) {
+		bp->dcbx_port_params.pfc.enabled = true;
+		bp->dcbx_port_params.pfc.priority_non_pauseable_mask =
+			~(pfc->pri_en_bitmap);
+	} else {
+		DP(NETIF_MSG_LINK, "DCBX_LOCAL_PFC_DISABLED\n");
+		bp->dcbx_port_params.pfc.enabled = false;
+		bp->dcbx_port_params.pfc.priority_non_pauseable_mask = 0;
+	}
+}
+
+static void bnx2x_get_dcbx_drv_param(struct bnx2x *bp,
+				     struct dcbx_features *features,
+				     u32 error)
+{
+	bnx2x_dcbx_get_ap_feature(bp, &features->app, error);
+
+	bnx2x_dcbx_get_pfc_feature(bp, &features->pfc, error);
+
+	bnx2x_dcbx_get_ets_feature(bp, &features->ets, error);
+}
+
+#define DCBX_LOCAL_MIB_MAX_TRY_READ		(100)
+static int bnx2x_dcbx_read_mib(struct bnx2x *bp,
+			       u32 *base_mib_addr,
+			       u32 offset,
+			       int read_mib_type)
+{
+	int max_try_read = 0, i;
+	u32 *buff, mib_size, prefix_seq_num, suffix_seq_num;
+	struct lldp_remote_mib *remote_mib ;
+	struct lldp_local_mib  *local_mib;
+
+
+	switch (read_mib_type) {
+	case DCBX_READ_LOCAL_MIB:
+		mib_size = sizeof(struct lldp_local_mib);
+		break;
+	case DCBX_READ_REMOTE_MIB:
+		mib_size = sizeof(struct lldp_remote_mib);
+		break;
+	default:
+		return 1; /*error*/
+	}
+
+	offset += BP_PORT(bp) * mib_size;
+
+	do {
+		buff = base_mib_addr;
+		for (i = 0; i < mib_size; i += 4, buff++)
+			*buff = REG_RD(bp, offset + i);
+
+		max_try_read++;
+
+		switch (read_mib_type) {
+		case DCBX_READ_LOCAL_MIB:
+			local_mib = (struct lldp_local_mib *) base_mib_addr;
+			prefix_seq_num = local_mib->prefix_seq_num;
+			suffix_seq_num = local_mib->suffix_seq_num;
+			break;
+		case DCBX_READ_REMOTE_MIB:
+			remote_mib = (struct lldp_remote_mib *) base_mib_addr;
+			prefix_seq_num = remote_mib->prefix_seq_num;
+			suffix_seq_num = remote_mib->suffix_seq_num;
+			break;
+		default:
+			return 1; /*error*/
+		}
+	} while ((prefix_seq_num != suffix_seq_num) &&
+	       (max_try_read < DCBX_LOCAL_MIB_MAX_TRY_READ));
+
+	if (max_try_read >= DCBX_LOCAL_MIB_MAX_TRY_READ) {
+		BNX2X_ERR("MIB could not be read\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+static void bnx2x_pfc_set_pfc(struct bnx2x *bp)
+{
+	if (CHIP_IS_E2(bp)) {
+		if (BP_PORT(bp)) {
+			BNX2X_ERR("4 port mode is not supported");
+			return;
+		}
+
+		if (bp->dcbx_port_params.pfc.enabled)
+
+			/* 1. Fills up common PFC structures if required.*/
+			/* 2. Configure NIG, MAC and BRB via the elink:
+			 *    elink must first check if BMAC is not in reset
+			 *    and only then configures the BMAC
+			 *    Or, configure EMAC.
+			 */
+			bnx2x_pfc_set(bp);
+
+		else
+			bnx2x_pfc_clear(bp);
+	}
+}
+
+static void bnx2x_dcbx_stop_hw_tx(struct bnx2x *bp)
+{
+	DP(NETIF_MSG_LINK, "sending STOP TRAFFIC\n");
+	bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_STOP_TRAFFIC,
+		      0 /* connectionless */,
+		      0 /* dataHi is zero */,
+		      0 /* dataLo is zero */,
+		      1 /* common */);
+}
+
+static void bnx2x_dcbx_resume_hw_tx(struct bnx2x *bp)
+{
+	bnx2x_pfc_fw_struct_e2(bp);
+	DP(NETIF_MSG_LINK, "sending START TRAFFIC\n");
+	bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_START_TRAFFIC,
+		      0, /* connectionless */
+		      U64_HI(bnx2x_sp_mapping(bp, pfc_config)),
+		      U64_LO(bnx2x_sp_mapping(bp, pfc_config)),
+		      1  /* commmon */);
+}
+
+static void bnx2x_dcbx_update_ets_params(struct bnx2x *bp)
+{
+	struct bnx2x_dcbx_pg_params *ets = &(bp->dcbx_port_params.ets);
+	u8	status = 0;
+
+	bnx2x_ets_disabled(&bp->link_params);
+
+	if (!ets->enabled)
+		return;
+
+	if ((ets->num_of_cos == 0) || (ets->num_of_cos > E2_NUM_OF_COS)) {
+		BNX2X_ERR("illegal num of cos= %x", ets->num_of_cos);
+		return;
+	}
+
+	/* valid COS entries */
+	if (ets->num_of_cos == 1)   /* no ETS */
+		return;
+
+	/* sanity */
+	if (((BNX2X_DCBX_COS_NOT_STRICT == ets->cos_params[0].strict) &&
+	     (DCBX_INVALID_COS_BW == ets->cos_params[0].bw_tbl)) ||
+	    ((BNX2X_DCBX_COS_NOT_STRICT == ets->cos_params[1].strict) &&
+	     (DCBX_INVALID_COS_BW == ets->cos_params[1].bw_tbl))) {
+		BNX2X_ERR("all COS should have at least bw_limit or strict"
+			    "ets->cos_params[0].strict= %x"
+			    "ets->cos_params[0].bw_tbl= %x"
+			    "ets->cos_params[1].strict= %x"
+			    "ets->cos_params[1].bw_tbl= %x",
+			  ets->cos_params[0].strict,
+			  ets->cos_params[0].bw_tbl,
+			  ets->cos_params[1].strict,
+			  ets->cos_params[1].bw_tbl);
+		return;
+	}
+	/* If we join a group and there is bw_tbl and strict then bw rules */
+	if ((DCBX_INVALID_COS_BW != ets->cos_params[0].bw_tbl) &&
+	    (DCBX_INVALID_COS_BW != ets->cos_params[1].bw_tbl)) {
+		u32 bw_tbl_0 = ets->cos_params[0].bw_tbl;
+		u32 bw_tbl_1 = ets->cos_params[1].bw_tbl;
+		/* Do not allow 0-100 configuration
+		 * since PBF does not support it
+		 * force 1-99 instead
+		 */
+		if (bw_tbl_0 == 0) {
+			bw_tbl_0 = 1;
+			bw_tbl_1 = 99;
+		} else if (bw_tbl_1 == 0) {
+			bw_tbl_1 = 1;
+			bw_tbl_0 = 99;
+		}
+
+		bnx2x_ets_bw_limit(&bp->link_params, bw_tbl_0, bw_tbl_1);
+	} else {
+		if (ets->cos_params[0].strict == BNX2X_DCBX_COS_HIGH_STRICT)
+			status = bnx2x_ets_strict(&bp->link_params, 0);
+		else if (ets->cos_params[1].strict
+						== BNX2X_DCBX_COS_HIGH_STRICT)
+			status = bnx2x_ets_strict(&bp->link_params, 1);
+
+		if (status)
+			BNX2X_ERR("update_ets_params failed\n");
+	}
+}
+
+static int bnx2x_dcbx_read_shmem_neg_results(struct bnx2x *bp)
+{
+	struct lldp_local_mib local_mib = {0};
+	u32 dcbx_neg_res_offset = SHMEM2_RD(bp, dcbx_neg_res_offset);
+	int rc;
+
+	DP(NETIF_MSG_LINK, "dcbx_neg_res_offset 0x%x\n", dcbx_neg_res_offset);
+
+	if (SHMEM_DCBX_NEG_RES_NONE == dcbx_neg_res_offset) {
+		BNX2X_ERR("FW doesn't support dcbx_neg_res_offset\n");
+		return -EINVAL;
+	}
+	rc = bnx2x_dcbx_read_mib(bp, (u32 *)&local_mib, dcbx_neg_res_offset,
+				 DCBX_READ_LOCAL_MIB);
+
+	if (rc) {
+		BNX2X_ERR("Faild to read local mib from FW\n");
+		return rc;
+	}
+
+	/* save features and error */
+	bp->dcbx_local_feat = local_mib.features;
+	bp->dcbx_error = local_mib.error;
+	return 0;
+}
+
+void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state)
+{
+	switch (state) {
+	case BNX2X_DCBX_STATE_NEG_RECEIVED:
+		{
+			DP(NETIF_MSG_LINK, "BNX2X_DCBX_STATE_NEG_RECEIVED\n");
+
+			/* Read neg results if dcbx is in the FW */
+			if (bnx2x_dcbx_read_shmem_neg_results(bp))
+				return;
+
+			bnx2x_dump_dcbx_drv_param(bp, &bp->dcbx_local_feat,
+						  bp->dcbx_error);
+
+			bnx2x_get_dcbx_drv_param(bp, &bp->dcbx_local_feat,
+						 bp->dcbx_error);
+
+			if (bp->state != BNX2X_STATE_OPENING_WAIT4_LOAD) {
+				bnx2x_dcbx_stop_hw_tx(bp);
+				return;
+			}
+			/* fall through */
+		}
+	case BNX2X_DCBX_STATE_TX_PAUSED:
+		DP(NETIF_MSG_LINK, "BNX2X_DCBX_STATE_TX_PAUSED\n");
+		bnx2x_pfc_set_pfc(bp);
+
+		bnx2x_dcbx_update_ets_params(bp);
+		if (bp->state != BNX2X_STATE_OPENING_WAIT4_LOAD) {
+			bnx2x_dcbx_resume_hw_tx(bp);
+			return;
+		}
+		/* fall through */
+	case BNX2X_DCBX_STATE_TX_RELEASED:
+		DP(NETIF_MSG_LINK, "BNX2X_DCBX_STATE_TX_RELEASED\n");
+		if (bp->state != BNX2X_STATE_OPENING_WAIT4_LOAD)
+			bnx2x_fw_command(bp, DRV_MSG_CODE_DCBX_PMF_DRV_OK, 0);
+
+		return;
+	default:
+		BNX2X_ERR("Unknown DCBX_STATE\n");
+	}
+}
+
+
+#define LLDP_STATS_OFFSET(bp)		(BP_PORT(bp)*\
+					sizeof(struct lldp_dcbx_stat))
+
+/* calculate struct offset in array according to chip information */
+#define LLDP_PARAMS_OFFSET(bp)		(BP_PORT(bp)*sizeof(struct lldp_params))
+
+#define LLDP_ADMIN_MIB_OFFSET(bp)	(PORT_MAX*sizeof(struct lldp_params) + \
+				      BP_PORT(bp)*sizeof(struct lldp_admin_mib))
+
+static void bnx2x_dcbx_lldp_updated_params(struct bnx2x *bp,
+					   u32 dcbx_lldp_params_offset)
+{
+	struct lldp_params lldp_params = {0};
+	u32 i = 0, *buff = NULL;
+	u32 offset = dcbx_lldp_params_offset + LLDP_PARAMS_OFFSET(bp);
+
+	DP(NETIF_MSG_LINK, "lldp_offset 0x%x\n", offset);
+
+	if ((bp->lldp_config_params.overwrite_settings ==
+				BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE)) {
+		/* Read the data first */
+		buff = (u32 *)&lldp_params;
+		for (i = 0; i < sizeof(struct lldp_params); i += 4,  buff++)
+			*buff = REG_RD(bp, (offset + i));
+
+		lldp_params.msg_tx_hold =
+			(u8)bp->lldp_config_params.msg_tx_hold;
+		lldp_params.msg_fast_tx_interval =
+			(u8)bp->lldp_config_params.msg_fast_tx;
+		lldp_params.tx_crd_max =
+			(u8)bp->lldp_config_params.tx_credit_max;
+		lldp_params.msg_tx_interval =
+			(u8)bp->lldp_config_params.msg_tx_interval;
+		lldp_params.tx_fast =
+			(u8)bp->lldp_config_params.tx_fast;
+
+		/* Write the data.*/
+		buff = (u32 *)&lldp_params;
+		for (i = 0; i < sizeof(struct lldp_params); i += 4, buff++)
+			REG_WR(bp, (offset + i) , *buff);
+
+
+	} else if (BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE ==
+				bp->lldp_config_params.overwrite_settings)
+		bp->lldp_config_params.overwrite_settings =
+				BNX2X_DCBX_OVERWRITE_SETTINGS_INVALID;
+}
+
+static void bnx2x_dcbx_admin_mib_updated_params(struct bnx2x *bp,
+				u32 dcbx_lldp_params_offset)
+{
+	struct lldp_admin_mib admin_mib;
+	u32 i, other_traf_type = PREDEFINED_APP_IDX_MAX, traf_type = 0;
+	u32 *buff;
+	u32 offset = dcbx_lldp_params_offset + LLDP_ADMIN_MIB_OFFSET(bp);
+
+	/*shortcuts*/
+	struct dcbx_features *af = &admin_mib.features;
+	struct bnx2x_config_dcbx_params *dp = &bp->dcbx_config_params;
+
+	memset(&admin_mib, 0, sizeof(struct lldp_admin_mib));
+	buff = (u32 *)&admin_mib;
+	/* Read the data first */
+	for (i = 0; i < sizeof(struct lldp_admin_mib); i += 4, buff++)
+		*buff = REG_RD(bp, (offset + i));
+
+	if (bp->dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_ON)
+		SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_DCBX_ENABLED);
+	else
+		RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_DCBX_ENABLED);
+
+	if ((BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE ==
+				dp->overwrite_settings)) {
+		RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_CEE_VERSION_MASK);
+		admin_mib.ver_cfg_flags |=
+			(dp->admin_dcbx_version << DCBX_CEE_VERSION_SHIFT) &
+			 DCBX_CEE_VERSION_MASK;
+
+		af->ets.enabled = (u8)dp->admin_ets_enable;
+
+		af->pfc.enabled = (u8)dp->admin_pfc_enable;
+
+		/* FOR IEEE dp->admin_tc_supported_tx_enable */
+		if (dp->admin_ets_configuration_tx_enable)
+			SET_FLAGS(admin_mib.ver_cfg_flags,
+				  DCBX_ETS_CONFIG_TX_ENABLED);
+		else
+			RESET_FLAGS(admin_mib.ver_cfg_flags,
+				    DCBX_ETS_CONFIG_TX_ENABLED);
+		/* For IEEE admin_ets_recommendation_tx_enable */
+		if (dp->admin_pfc_tx_enable)
+			SET_FLAGS(admin_mib.ver_cfg_flags,
+				  DCBX_PFC_CONFIG_TX_ENABLED);
+		else
+			RESET_FLAGS(admin_mib.ver_cfg_flags,
+				  DCBX_PFC_CONFIG_TX_ENABLED);
+
+		if (dp->admin_application_priority_tx_enable)
+			SET_FLAGS(admin_mib.ver_cfg_flags,
+				  DCBX_APP_CONFIG_TX_ENABLED);
+		else
+			RESET_FLAGS(admin_mib.ver_cfg_flags,
+				  DCBX_APP_CONFIG_TX_ENABLED);
+
+		if (dp->admin_ets_willing)
+			SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_ETS_WILLING);
+		else
+			RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_ETS_WILLING);
+		/* For IEEE admin_ets_reco_valid */
+		if (dp->admin_pfc_willing)
+			SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_PFC_WILLING);
+		else
+			RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_PFC_WILLING);
+
+		if (dp->admin_app_priority_willing)
+			SET_FLAGS(admin_mib.ver_cfg_flags, DCBX_APP_WILLING);
+		else
+			RESET_FLAGS(admin_mib.ver_cfg_flags, DCBX_APP_WILLING);
+
+		for (i = 0 ; i < DCBX_MAX_NUM_PG_BW_ENTRIES; i++) {
+			DCBX_PG_BW_SET(af->ets.pg_bw_tbl, i,
+				(u8)dp->admin_configuration_bw_precentage[i]);
+
+			DP(NETIF_MSG_LINK, "pg_bw_tbl[%d] = %02x\n",
+			   i, DCBX_PG_BW_GET(af->ets.pg_bw_tbl, i));
+		}
+
+		for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES; i++) {
+			DCBX_PRI_PG_SET(af->ets.pri_pg_tbl, i,
+					(u8)dp->admin_configuration_ets_pg[i]);
+
+			DP(NETIF_MSG_LINK, "pri_pg_tbl[%d] = %02x\n",
+			   i, DCBX_PRI_PG_GET(af->ets.pri_pg_tbl, i));
+		}
+
+		/*For IEEE admin_recommendation_bw_precentage
+		 *For IEEE admin_recommendation_ets_pg */
+		af->pfc.pri_en_bitmap = (u8)dp->admin_pfc_bitmap;
+		for (i = 0; i < 4; i++) {
+			if (dp->admin_priority_app_table[i].valid) {
+				struct bnx2x_admin_priority_app_table *table =
+					dp->admin_priority_app_table;
+				if ((ETH_TYPE_FCOE == table[i].app_id) &&
+				   (TRAFFIC_TYPE_ETH == table[i].traffic_type))
+					traf_type = FCOE_APP_IDX;
+				else if ((TCP_PORT_ISCSI == table[i].app_id) &&
+				   (TRAFFIC_TYPE_PORT == table[i].traffic_type))
+					traf_type = ISCSI_APP_IDX;
+				else
+					traf_type = other_traf_type++;
+
+				af->app.app_pri_tbl[traf_type].app_id =
+					table[i].app_id;
+
+				af->app.app_pri_tbl[traf_type].pri_bitmap =
+					(u8)(1 << table[i].priority);
+
+				af->app.app_pri_tbl[traf_type].appBitfield =
+				    (DCBX_APP_ENTRY_VALID);
+
+				af->app.app_pri_tbl[traf_type].appBitfield |=
+				   (TRAFFIC_TYPE_ETH == table[i].traffic_type) ?
+					DCBX_APP_SF_ETH_TYPE : DCBX_APP_SF_PORT;
+			}
+		}
+
+		af->app.default_pri = (u8)dp->admin_default_priority;
+
+	} else if (BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE ==
+						dp->overwrite_settings)
+		dp->overwrite_settings = BNX2X_DCBX_OVERWRITE_SETTINGS_INVALID;
+
+	/* Write the data. */
+	buff = (u32 *)&admin_mib;
+	for (i = 0; i < sizeof(struct lldp_admin_mib); i += 4, buff++)
+		REG_WR(bp, (offset + i), *buff);
+}
+
+void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled)
+{
+	if (CHIP_IS_E2(bp) && !CHIP_MODE_IS_4_PORT(bp)) {
+		bp->dcb_state = dcb_on;
+		bp->dcbx_enabled = dcbx_enabled;
+	} else {
+		bp->dcb_state = false;
+		bp->dcbx_enabled = BNX2X_DCBX_ENABLED_INVALID;
+	}
+	DP(NETIF_MSG_LINK, "DCB state [%s:%s]\n",
+	   dcb_on ? "ON" : "OFF",
+	   dcbx_enabled == BNX2X_DCBX_ENABLED_OFF ? "user-mode" :
+	   dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_OFF ? "on-chip static" :
+	   dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_ON ?
+	   "on-chip with negotiation" : "invalid");
+}
+
+void bnx2x_dcbx_init_params(struct bnx2x *bp)
+{
+	bp->dcbx_config_params.admin_dcbx_version = 0x0; /* 0 - CEE; 1 - IEEE */
+	bp->dcbx_config_params.admin_ets_willing = 1;
+	bp->dcbx_config_params.admin_pfc_willing = 1;
+	bp->dcbx_config_params.overwrite_settings = 1;
+	bp->dcbx_config_params.admin_ets_enable = 1;
+	bp->dcbx_config_params.admin_pfc_enable = 1;
+	bp->dcbx_config_params.admin_tc_supported_tx_enable = 1;
+	bp->dcbx_config_params.admin_ets_configuration_tx_enable = 1;
+	bp->dcbx_config_params.admin_pfc_tx_enable = 1;
+	bp->dcbx_config_params.admin_application_priority_tx_enable = 1;
+	bp->dcbx_config_params.admin_ets_reco_valid = 1;
+	bp->dcbx_config_params.admin_app_priority_willing = 1;
+	bp->dcbx_config_params.admin_configuration_bw_precentage[0] = 00;
+	bp->dcbx_config_params.admin_configuration_bw_precentage[1] = 50;
+	bp->dcbx_config_params.admin_configuration_bw_precentage[2] = 50;
+	bp->dcbx_config_params.admin_configuration_bw_precentage[3] = 0;
+	bp->dcbx_config_params.admin_configuration_bw_precentage[4] = 0;
+	bp->dcbx_config_params.admin_configuration_bw_precentage[5] = 0;
+	bp->dcbx_config_params.admin_configuration_bw_precentage[6] = 0;
+	bp->dcbx_config_params.admin_configuration_bw_precentage[7] = 0;
+	bp->dcbx_config_params.admin_configuration_ets_pg[0] = 1;
+	bp->dcbx_config_params.admin_configuration_ets_pg[1] = 0;
+	bp->dcbx_config_params.admin_configuration_ets_pg[2] = 0;
+	bp->dcbx_config_params.admin_configuration_ets_pg[3] = 2;
+	bp->dcbx_config_params.admin_configuration_ets_pg[4] = 0;
+	bp->dcbx_config_params.admin_configuration_ets_pg[5] = 0;
+	bp->dcbx_config_params.admin_configuration_ets_pg[6] = 0;
+	bp->dcbx_config_params.admin_configuration_ets_pg[7] = 0;
+	bp->dcbx_config_params.admin_recommendation_bw_precentage[0] = 0;
+	bp->dcbx_config_params.admin_recommendation_bw_precentage[1] = 1;
+	bp->dcbx_config_params.admin_recommendation_bw_precentage[2] = 2;
+	bp->dcbx_config_params.admin_recommendation_bw_precentage[3] = 0;
+	bp->dcbx_config_params.admin_recommendation_bw_precentage[4] = 7;
+	bp->dcbx_config_params.admin_recommendation_bw_precentage[5] = 5;
+	bp->dcbx_config_params.admin_recommendation_bw_precentage[6] = 6;
+	bp->dcbx_config_params.admin_recommendation_bw_precentage[7] = 7;
+	bp->dcbx_config_params.admin_recommendation_ets_pg[0] = 0;
+	bp->dcbx_config_params.admin_recommendation_ets_pg[1] = 1;
+	bp->dcbx_config_params.admin_recommendation_ets_pg[2] = 2;
+	bp->dcbx_config_params.admin_recommendation_ets_pg[3] = 3;
+	bp->dcbx_config_params.admin_recommendation_ets_pg[4] = 4;
+	bp->dcbx_config_params.admin_recommendation_ets_pg[5] = 5;
+	bp->dcbx_config_params.admin_recommendation_ets_pg[6] = 6;
+	bp->dcbx_config_params.admin_recommendation_ets_pg[7] = 7;
+	bp->dcbx_config_params.admin_pfc_bitmap = 0x8; /* FCoE(3) enable */
+	bp->dcbx_config_params.admin_priority_app_table[0].valid = 1;
+	bp->dcbx_config_params.admin_priority_app_table[1].valid = 1;
+	bp->dcbx_config_params.admin_priority_app_table[2].valid = 0;
+	bp->dcbx_config_params.admin_priority_app_table[3].valid = 0;
+	bp->dcbx_config_params.admin_priority_app_table[0].priority = 3;
+	bp->dcbx_config_params.admin_priority_app_table[1].priority = 0;
+	bp->dcbx_config_params.admin_priority_app_table[2].priority = 0;
+	bp->dcbx_config_params.admin_priority_app_table[3].priority = 0;
+	bp->dcbx_config_params.admin_priority_app_table[0].traffic_type = 0;
+	bp->dcbx_config_params.admin_priority_app_table[1].traffic_type = 1;
+	bp->dcbx_config_params.admin_priority_app_table[2].traffic_type = 0;
+	bp->dcbx_config_params.admin_priority_app_table[3].traffic_type = 0;
+	bp->dcbx_config_params.admin_priority_app_table[0].app_id = 0x8906;
+	bp->dcbx_config_params.admin_priority_app_table[1].app_id = 3260;
+	bp->dcbx_config_params.admin_priority_app_table[2].app_id = 0;
+	bp->dcbx_config_params.admin_priority_app_table[3].app_id = 0;
+	bp->dcbx_config_params.admin_default_priority =
+		bp->dcbx_config_params.admin_priority_app_table[1].priority;
+}
+
+void bnx2x_dcbx_init(struct bnx2x *bp)
+{
+	u32 dcbx_lldp_params_offset = SHMEM_LLDP_DCBX_PARAMS_NONE;
+
+	if (bp->dcbx_enabled <= 0)
+		return;
+
+	/* validate:
+	 * chip of good for dcbx version,
+	 * dcb is wanted
+	 * the function is pmf
+	 * shmem2 contains DCBX support fields
+	 */
+	DP(NETIF_MSG_LINK, "dcb_state %d bp->port.pmf %d\n",
+	   bp->dcb_state, bp->port.pmf);
+
+	if (bp->dcb_state ==  BNX2X_DCB_STATE_ON && bp->port.pmf &&
+	    SHMEM2_HAS(bp, dcbx_lldp_params_offset)) {
+		dcbx_lldp_params_offset =
+			SHMEM2_RD(bp, dcbx_lldp_params_offset);
+
+		DP(NETIF_MSG_LINK, "dcbx_lldp_params_offset 0x%x\n",
+		   dcbx_lldp_params_offset);
+
+		if (SHMEM_LLDP_DCBX_PARAMS_NONE != dcbx_lldp_params_offset) {
+			bnx2x_dcbx_lldp_updated_params(bp,
+						       dcbx_lldp_params_offset);
+
+			bnx2x_dcbx_admin_mib_updated_params(bp,
+				dcbx_lldp_params_offset);
+
+			/* set default configuration BC has */
+			bnx2x_dcbx_set_params(bp,
+					      BNX2X_DCBX_STATE_NEG_RECEIVED);
+
+			bnx2x_fw_command(bp,
+					 DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG, 0);
+		}
+	}
+}
+
+void bnx2x_dcb_init_intmem_pfc(struct bnx2x *bp)
+{
+	struct priority_cos pricos[MAX_PFC_TRAFFIC_TYPES];
+	u32 i = 0, addr;
+	memset(pricos, 0, sizeof(pricos));
+	/* Default initialization */
+	for (i = 0; i < MAX_PFC_TRAFFIC_TYPES; i++)
+		pricos[i].priority = LLFC_TRAFFIC_TYPE_TO_PRIORITY_UNMAPPED;
+
+	/* Store per port struct to internal memory */
+	addr = BAR_XSTRORM_INTMEM +
+			XSTORM_CMNG_PER_PORT_VARS_OFFSET(BP_PORT(bp)) +
+			offsetof(struct cmng_struct_per_port,
+				 traffic_type_to_priority_cos);
+	__storm_memset_struct(bp, addr, sizeof(pricos), (u32 *)pricos);
+
+
+	/* LLFC disabled.*/
+	REG_WR8(bp , BAR_XSTRORM_INTMEM +
+		    XSTORM_CMNG_PER_PORT_VARS_OFFSET(BP_PORT(bp)) +
+		    offsetof(struct cmng_struct_per_port, llfc_mode),
+			LLFC_MODE_NONE);
+
+	/* DCBX disabled.*/
+	REG_WR8(bp , BAR_XSTRORM_INTMEM +
+		    XSTORM_CMNG_PER_PORT_VARS_OFFSET(BP_PORT(bp)) +
+		    offsetof(struct cmng_struct_per_port, dcb_enabled),
+			DCB_DISABLED);
+}
+
+static void
+bnx2x_dcbx_print_cos_params(struct bnx2x *bp,
+			    struct flow_control_configuration *pfc_fw_cfg)
+{
+	u8 pri = 0;
+	u8 cos = 0;
+
+	DP(NETIF_MSG_LINK,
+	   "pfc_fw_cfg->dcb_version %x\n", pfc_fw_cfg->dcb_version);
+	DP(NETIF_MSG_LINK,
+	   "pdev->params.dcbx_port_params.pfc."
+	   "priority_non_pauseable_mask %x\n",
+	   bp->dcbx_port_params.pfc.priority_non_pauseable_mask);
+
+	for (cos = 0 ; cos < bp->dcbx_port_params.ets.num_of_cos ; cos++) {
+		DP(NETIF_MSG_LINK, "pdev->params.dcbx_port_params.ets."
+		   "cos_params[%d].pri_bitmask %x\n", cos,
+		   bp->dcbx_port_params.ets.cos_params[cos].pri_bitmask);
+
+		DP(NETIF_MSG_LINK, "pdev->params.dcbx_port_params.ets."
+		   "cos_params[%d].bw_tbl %x\n", cos,
+		   bp->dcbx_port_params.ets.cos_params[cos].bw_tbl);
+
+		DP(NETIF_MSG_LINK, "pdev->params.dcbx_port_params.ets."
+		   "cos_params[%d].strict %x\n", cos,
+		   bp->dcbx_port_params.ets.cos_params[cos].strict);
+
+		DP(NETIF_MSG_LINK, "pdev->params.dcbx_port_params.ets."
+		   "cos_params[%d].pauseable %x\n", cos,
+		   bp->dcbx_port_params.ets.cos_params[cos].pauseable);
+	}
+
+	for (pri = 0; pri < LLFC_DRIVER_TRAFFIC_TYPE_MAX; pri++) {
+		DP(NETIF_MSG_LINK,
+		   "pfc_fw_cfg->traffic_type_to_priority_cos[%d]."
+		   "priority %x\n", pri,
+		   pfc_fw_cfg->traffic_type_to_priority_cos[pri].priority);
+
+		DP(NETIF_MSG_LINK,
+		   "pfc_fw_cfg->traffic_type_to_priority_cos[%d].cos %x\n",
+		   pri, pfc_fw_cfg->traffic_type_to_priority_cos[pri].cos);
+	}
+}
+
+/* fills help_data according to pg_info */
+static void bnx2x_dcbx_get_num_pg_traf_type(struct bnx2x *bp,
+					    u32 *pg_pri_orginal_spread,
+					    struct pg_help_data *help_data)
+{
+	bool pg_found  = false;
+	u32 i, traf_type, add_traf_type, add_pg;
+	u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority;
+	struct pg_entry_help_data *data = help_data->data; /*shotcut*/
+
+	/* Set to invalid */
+	for (i = 0; i < LLFC_DRIVER_TRAFFIC_TYPE_MAX; i++)
+		data[i].pg = DCBX_ILLEGAL_PG;
+
+	for (add_traf_type = 0;
+	     add_traf_type < LLFC_DRIVER_TRAFFIC_TYPE_MAX; add_traf_type++) {
+		pg_found = false;
+		if (ttp[add_traf_type] < MAX_PFC_PRIORITIES) {
+			add_pg = (u8)pg_pri_orginal_spread[ttp[add_traf_type]];
+			for (traf_type = 0;
+			     traf_type < LLFC_DRIVER_TRAFFIC_TYPE_MAX;
+			     traf_type++) {
+				if (data[traf_type].pg == add_pg) {
+					if (!(data[traf_type].pg_priority &
+					     (1 << ttp[add_traf_type])))
+						data[traf_type].
+							num_of_dif_pri++;
+					data[traf_type].pg_priority |=
+						(1 << ttp[add_traf_type]);
+					pg_found = true;
+					break;
+				}
+			}
+			if (false == pg_found) {
+				data[help_data->num_of_pg].pg = add_pg;
+				data[help_data->num_of_pg].pg_priority =
+						(1 << ttp[add_traf_type]);
+				data[help_data->num_of_pg].num_of_dif_pri = 1;
+				help_data->num_of_pg++;
+			}
+		}
+		DP(NETIF_MSG_LINK,
+		   "add_traf_type %d pg_found %s num_of_pg %d\n",
+		   add_traf_type, (false == pg_found) ? "NO" : "YES",
+		   help_data->num_of_pg);
+	}
+}
+
+
+/*******************************************************************************
+ * Description: single priority group
+ *
+ * Return:
+ ******************************************************************************/
+static void bnx2x_dcbx_ets_disabled_entry_data(struct bnx2x *bp,
+					       struct cos_help_data *cos_data,
+					       u32 pri_join_mask)
+{
+	/* Only one priority than only one COS */
+	cos_data->data[0].pausable =
+		IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask);
+	cos_data->data[0].pri_join_mask = pri_join_mask;
+	cos_data->data[0].cos_bw = 100;
+	cos_data->num_of_cos = 1;
+}
+
+/*******************************************************************************
+ * Description: updating the cos bw
+ *
+ * Return:
+ ******************************************************************************/
+static inline void bnx2x_dcbx_add_to_cos_bw(struct bnx2x *bp,
+					    struct cos_entry_help_data *data,
+					    u8 pg_bw)
+{
+	if (data->cos_bw == DCBX_INVALID_COS_BW)
+		data->cos_bw = pg_bw;
+	else
+		data->cos_bw += pg_bw;
+}
+
+/*******************************************************************************
+ * Description: single priority group
+ *
+ * Return:
+ ******************************************************************************/
+static void bnx2x_dcbx_separate_pauseable_from_non(struct bnx2x *bp,
+			struct cos_help_data *cos_data,
+			u32 *pg_pri_orginal_spread,
+			struct dcbx_ets_feature *ets)
+{
+	u32	pri_tested	= 0;
+	u8	i		= 0;
+	u8	entry		= 0;
+	u8	pg_entry	= 0;
+	u8	num_of_pri	= LLFC_DRIVER_TRAFFIC_TYPE_MAX;
+
+	cos_data->data[0].pausable = true;
+	cos_data->data[1].pausable = false;
+	cos_data->data[0].pri_join_mask = cos_data->data[1].pri_join_mask = 0;
+
+	for (i = 0 ; i < num_of_pri ; i++) {
+		pri_tested = 1 << bp->dcbx_port_params.
+					app.traffic_type_priority[i];
+
+		if (pri_tested & DCBX_PFC_PRI_NON_PAUSE_MASK(bp)) {
+			cos_data->data[1].pri_join_mask |= pri_tested;
+			entry = 1;
+		} else {
+			cos_data->data[0].pri_join_mask |= pri_tested;
+			entry = 0;
+		}
+		pg_entry = (u8)pg_pri_orginal_spread[bp->dcbx_port_params.
+						app.traffic_type_priority[i]];
+		/* There can be only one strict pg */
+		if (pg_entry < DCBX_MAX_NUM_PG_BW_ENTRIES)
+			bnx2x_dcbx_add_to_cos_bw(bp, &cos_data->data[entry],
+				DCBX_PG_BW_GET(ets->pg_bw_tbl, pg_entry));
+		else
+			/* If we join a group and one is strict
+			 * than the bw rulls */
+			cos_data->data[entry].strict =
+						BNX2X_DCBX_COS_HIGH_STRICT;
+	}
+	if ((0 == cos_data->data[0].pri_join_mask) &&
+	    (0 == cos_data->data[1].pri_join_mask))
+		BNX2X_ERR("dcbx error: Both groups must have priorities\n");
+}
+
+
+#ifndef POWER_OF_2
+#define POWER_OF_2(x)	((0 != x) && (0 == (x & (x-1))))
+#endif
+
+static void bxn2x_dcbx_single_pg_to_cos_params(struct bnx2x *bp,
+					      struct pg_help_data *pg_help_data,
+					      struct cos_help_data *cos_data,
+					      u32 pri_join_mask,
+					      u8 num_of_dif_pri)
+{
+	u8 i = 0;
+	u32 pri_tested = 0;
+	u32 pri_mask_without_pri = 0;
+	u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority;
+	/*debug*/
+	if (num_of_dif_pri == 1) {
+		bnx2x_dcbx_ets_disabled_entry_data(bp, cos_data, pri_join_mask);
+		return;
+	}
+	/* single priority group */
+	if (pg_help_data->data[0].pg < DCBX_MAX_NUM_PG_BW_ENTRIES) {
+		/* If there are both pauseable and non-pauseable priorities,
+		 * the pauseable priorities go to the first queue and
+		 * the non-pauseable priorities go to the second queue.
+		 */
+		if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) {
+			/* Pauseable */
+			cos_data->data[0].pausable = true;
+			/* Non pauseable.*/
+			cos_data->data[1].pausable = false;
+
+			if (2 == num_of_dif_pri) {
+				cos_data->data[0].cos_bw = 50;
+				cos_data->data[1].cos_bw = 50;
+			}
+
+			if (3 == num_of_dif_pri) {
+				if (POWER_OF_2(DCBX_PFC_PRI_GET_PAUSE(bp,
+							pri_join_mask))) {
+					cos_data->data[0].cos_bw = 33;
+					cos_data->data[1].cos_bw = 67;
+				} else {
+					cos_data->data[0].cos_bw = 67;
+					cos_data->data[1].cos_bw = 33;
+				}
+			}
+
+		} else if (IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask)) {
+			/* If there are only pauseable priorities,
+			 * then one/two priorities go to the first queue
+			 * and one priority goes to the second queue.
+			 */
+			if (2 == num_of_dif_pri) {
+				cos_data->data[0].cos_bw = 50;
+				cos_data->data[1].cos_bw = 50;
+			} else {
+				cos_data->data[0].cos_bw = 67;
+				cos_data->data[1].cos_bw = 33;
+			}
+			cos_data->data[1].pausable = true;
+			cos_data->data[0].pausable = true;
+			/* All priorities except FCOE */
+			cos_data->data[0].pri_join_mask = (pri_join_mask &
+				((u8)~(1 << ttp[LLFC_TRAFFIC_TYPE_FCOE])));
+			/* Only FCOE priority.*/
+			cos_data->data[1].pri_join_mask =
+				(1 << ttp[LLFC_TRAFFIC_TYPE_FCOE]);
+		} else
+			/* If there are only non-pauseable priorities,
+			 * they will all go to the same queue.
+			 */
+			bnx2x_dcbx_ets_disabled_entry_data(bp,
+						cos_data, pri_join_mask);
+	} else {
+		/* priority group which is not BW limited (PG#15):*/
+		if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) {
+			/* If there are both pauseable and non-pauseable
+			 * priorities, the pauseable priorities go to the first
+			 * queue and the non-pauseable priorities
+			 * go to the second queue.
+			 */
+			if (DCBX_PFC_PRI_GET_PAUSE(bp, pri_join_mask) >
+			    DCBX_PFC_PRI_GET_NON_PAUSE(bp, pri_join_mask)) {
+				cos_data->data[0].strict =
+					BNX2X_DCBX_COS_HIGH_STRICT;
+				cos_data->data[1].strict =
+					BNX2X_DCBX_COS_LOW_STRICT;
+			} else {
+				cos_data->data[0].strict =
+					BNX2X_DCBX_COS_LOW_STRICT;
+				cos_data->data[1].strict =
+					BNX2X_DCBX_COS_HIGH_STRICT;
+			}
+			/* Pauseable */
+			cos_data->data[0].pausable = true;
+			/* Non pause-able.*/
+			cos_data->data[1].pausable = false;
+		} else {
+			/* If there are only pauseable priorities or
+			 * only non-pauseable,* the lower priorities go
+			 * to the first queue and the higherpriorities go
+			 * to the second queue.
+			 */
+			cos_data->data[0].pausable =
+				cos_data->data[1].pausable =
+				IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask);
+
+			for (i = 0 ; i < LLFC_DRIVER_TRAFFIC_TYPE_MAX; i++) {
+				pri_tested = 1 << bp->dcbx_port_params.
+					app.traffic_type_priority[i];
+				/* Remove priority tested */
+				pri_mask_without_pri =
+					(pri_join_mask & ((u8)(~pri_tested)));
+				if (pri_mask_without_pri < pri_tested)
+					break;
+			}
+
+			if (i == LLFC_DRIVER_TRAFFIC_TYPE_MAX)
+				BNX2X_ERR("Invalid value for pri_join_mask -"
+					  " could not find a priority\n");
+
+			cos_data->data[0].pri_join_mask = pri_mask_without_pri;
+			cos_data->data[1].pri_join_mask = pri_tested;
+			/* Both queues are strict priority,
+			 * and that with the highest priority
+			 * gets the highest strict priority in the arbiter.
+			 */
+			cos_data->data[0].strict = BNX2X_DCBX_COS_LOW_STRICT;
+			cos_data->data[1].strict = BNX2X_DCBX_COS_HIGH_STRICT;
+		}
+	}
+}
+
+static void bnx2x_dcbx_two_pg_to_cos_params(
+			    struct bnx2x		*bp,
+			    struct  pg_help_data	*pg_help_data,
+			    struct dcbx_ets_feature	*ets,
+			    struct cos_help_data	*cos_data,
+			    u32			*pg_pri_orginal_spread,
+			    u32				pri_join_mask,
+			    u8				num_of_dif_pri)
+{
+	u8 i = 0;
+	u8 pg[E2_NUM_OF_COS] = {0};
+
+	/* If there are both pauseable and non-pauseable priorities,
+	 * the pauseable priorities go to the first queue and
+	 * the non-pauseable priorities go to the second queue.
+	 */
+	if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask)) {
+		if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp,
+					 pg_help_data->data[0].pg_priority) ||
+		    IS_DCBX_PFC_PRI_MIX_PAUSE(bp,
+					 pg_help_data->data[1].pg_priority)) {
+			/* If one PG contains both pauseable and
+			 * non-pauseable priorities then ETS is disabled.
+			 */
+			bnx2x_dcbx_separate_pauseable_from_non(bp, cos_data,
+					pg_pri_orginal_spread, ets);
+			bp->dcbx_port_params.ets.enabled = false;
+			return;
+		}
+
+		/* Pauseable */
+		cos_data->data[0].pausable = true;
+		/* Non pauseable. */
+		cos_data->data[1].pausable = false;
+		if (IS_DCBX_PFC_PRI_ONLY_PAUSE(bp,
+				pg_help_data->data[0].pg_priority)) {
+			/* 0 is pauseable */
+			cos_data->data[0].pri_join_mask =
+				pg_help_data->data[0].pg_priority;
+			pg[0] = pg_help_data->data[0].pg;
+			cos_data->data[1].pri_join_mask =
+				pg_help_data->data[1].pg_priority;
+			pg[1] = pg_help_data->data[1].pg;
+		} else {/* 1 is pauseable */
+			cos_data->data[0].pri_join_mask =
+				pg_help_data->data[1].pg_priority;
+			pg[0] = pg_help_data->data[1].pg;
+			cos_data->data[1].pri_join_mask =
+				pg_help_data->data[0].pg_priority;
+			pg[1] = pg_help_data->data[0].pg;
+		}
+	} else {
+		/* If there are only pauseable priorities or
+		 * only non-pauseable, each PG goes to a queue.
+		 */
+		cos_data->data[0].pausable = cos_data->data[1].pausable =
+			IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask);
+		cos_data->data[0].pri_join_mask =
+			pg_help_data->data[0].pg_priority;
+		pg[0] = pg_help_data->data[0].pg;
+		cos_data->data[1].pri_join_mask =
+			pg_help_data->data[1].pg_priority;
+		pg[1] = pg_help_data->data[1].pg;
+	}
+
+	/* There can be only one strict pg */
+	for (i = 0 ; i < E2_NUM_OF_COS; i++) {
+		if (pg[i] < DCBX_MAX_NUM_PG_BW_ENTRIES)
+			cos_data->data[i].cos_bw =
+				DCBX_PG_BW_GET(ets->pg_bw_tbl, pg[i]);
+		else
+			cos_data->data[i].strict = BNX2X_DCBX_COS_HIGH_STRICT;
+	}
+}
+
+/*******************************************************************************
+ * Description: Still
+ *
+ * Return:
+ ******************************************************************************/
+static void bnx2x_dcbx_three_pg_to_cos_params(
+			      struct bnx2x		*bp,
+			      struct pg_help_data	*pg_help_data,
+			      struct dcbx_ets_feature	*ets,
+			      struct cos_help_data	*cos_data,
+			      u32			*pg_pri_orginal_spread,
+			      u32			pri_join_mask,
+			      u8			num_of_dif_pri)
+{
+	u8 i = 0;
+	u32 pri_tested = 0;
+	u8 entry = 0;
+	u8 pg_entry = 0;
+	bool b_found_strict = false;
+	u8 num_of_pri = LLFC_DRIVER_TRAFFIC_TYPE_MAX;
+
+	cos_data->data[0].pri_join_mask = cos_data->data[1].pri_join_mask = 0;
+	/* If there are both pauseable and non-pauseable priorities,
+	 * the pauseable priorities go to the first queue and the
+	 * non-pauseable priorities go to the second queue.
+	 */
+	if (IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pri_join_mask))
+		bnx2x_dcbx_separate_pauseable_from_non(bp,
+				cos_data, pg_pri_orginal_spread, ets);
+	else {
+		/* If two BW-limited PG-s were combined to one queue,
+		 * the BW is their sum.
+		 *
+		 * If there are only pauseable priorities or only non-pauseable,
+		 * and there are both BW-limited and non-BW-limited PG-s,
+		 * the BW-limited PG/s go to one queue and the non-BW-limited
+		 * PG/s go to the second queue.
+		 *
+		 * If there are only pauseable priorities or only non-pauseable
+		 * and all are BW limited, then	two priorities go to the first
+		 * queue and one priority goes to the second queue.
+		 *
+		 * We will join this two cases:
+		 * if one is BW limited it will go to the secoend queue
+		 * otherwise the last priority will get it
+		 */
+
+		cos_data->data[0].pausable = cos_data->data[1].pausable =
+			IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pri_join_mask);
+
+		for (i = 0 ; i < num_of_pri; i++) {
+			pri_tested = 1 << bp->dcbx_port_params.
+				app.traffic_type_priority[i];
+			pg_entry = (u8)pg_pri_orginal_spread[bp->
+				dcbx_port_params.app.traffic_type_priority[i]];
+
+			if (pg_entry < DCBX_MAX_NUM_PG_BW_ENTRIES) {
+				entry = 0;
+
+				if (i == (num_of_pri-1) &&
+				    false == b_found_strict)
+					/* last entry will be handled separately
+					 * If no priority is strict than last
+					 * enty goes to last queue.*/
+					entry = 1;
+				cos_data->data[entry].pri_join_mask |=
+								pri_tested;
+				bnx2x_dcbx_add_to_cos_bw(bp,
+					&cos_data->data[entry],
+					DCBX_PG_BW_GET(ets->pg_bw_tbl,
+						       pg_entry));
+			} else {
+				b_found_strict = true;
+				cos_data->data[1].pri_join_mask |= pri_tested;
+				/* If we join a group and one is strict
+				 * than the bw rulls */
+				cos_data->data[1].strict =
+					BNX2X_DCBX_COS_HIGH_STRICT;
+			}
+		}
+	}
+}
+
+
+static void bnx2x_dcbx_fill_cos_params(struct bnx2x *bp,
+				       struct pg_help_data *help_data,
+				       struct dcbx_ets_feature *ets,
+				       u32 *pg_pri_orginal_spread)
+{
+	struct cos_help_data         cos_data ;
+	u8                    i                           = 0;
+	u32                   pri_join_mask               = 0;
+	u8                    num_of_dif_pri              = 0;
+
+	memset(&cos_data, 0, sizeof(cos_data));
+	/* Validate the pg value */
+	for (i = 0; i < help_data->num_of_pg ; i++) {
+		if (DCBX_STRICT_PRIORITY != help_data->data[i].pg &&
+		    DCBX_MAX_NUM_PG_BW_ENTRIES <= help_data->data[i].pg)
+			BNX2X_ERR("Invalid pg[%d] data %x\n", i,
+				  help_data->data[i].pg);
+		pri_join_mask   |=  help_data->data[i].pg_priority;
+		num_of_dif_pri  += help_data->data[i].num_of_dif_pri;
+	}
+
+	/* default settings */
+	cos_data.num_of_cos = 2;
+	for (i = 0; i < E2_NUM_OF_COS ; i++) {
+		cos_data.data[i].pri_join_mask    = pri_join_mask;
+		cos_data.data[i].pausable         = false;
+		cos_data.data[i].strict           = BNX2X_DCBX_COS_NOT_STRICT;
+		cos_data.data[i].cos_bw           = DCBX_INVALID_COS_BW;
+	}
+
+	switch (help_data->num_of_pg) {
+	case 1:
+
+		bxn2x_dcbx_single_pg_to_cos_params(
+					       bp,
+					       help_data,
+					       &cos_data,
+					       pri_join_mask,
+					       num_of_dif_pri);
+		break;
+	case 2:
+		bnx2x_dcbx_two_pg_to_cos_params(
+					    bp,
+					    help_data,
+					    ets,
+					    &cos_data,
+					    pg_pri_orginal_spread,
+					    pri_join_mask,
+					    num_of_dif_pri);
+		break;
+
+	case 3:
+		bnx2x_dcbx_three_pg_to_cos_params(
+					      bp,
+					      help_data,
+					      ets,
+					      &cos_data,
+					      pg_pri_orginal_spread,
+					      pri_join_mask,
+					      num_of_dif_pri);
+
+		break;
+	default:
+		BNX2X_ERR("Wrong pg_help_data.num_of_pg\n");
+		bnx2x_dcbx_ets_disabled_entry_data(bp,
+						   &cos_data, pri_join_mask);
+	}
+
+	for (i = 0; i < cos_data.num_of_cos ; i++) {
+		struct bnx2x_dcbx_cos_params *params =
+			&bp->dcbx_port_params.ets.cos_params[i];
+
+		params->pauseable = cos_data.data[i].pausable;
+		params->strict = cos_data.data[i].strict;
+		params->bw_tbl = cos_data.data[i].cos_bw;
+		if (params->pauseable) {
+			params->pri_bitmask =
+			DCBX_PFC_PRI_GET_PAUSE(bp,
+					cos_data.data[i].pri_join_mask);
+			DP(NETIF_MSG_LINK, "COS %d PAUSABLE prijoinmask 0x%x\n",
+				  i, cos_data.data[i].pri_join_mask);
+		} else {
+			params->pri_bitmask =
+			DCBX_PFC_PRI_GET_NON_PAUSE(bp,
+					cos_data.data[i].pri_join_mask);
+			DP(NETIF_MSG_LINK, "COS %d NONPAUSABLE prijoinmask "
+					  "0x%x\n",
+				  i, cos_data.data[i].pri_join_mask);
+		}
+	}
+
+	bp->dcbx_port_params.ets.num_of_cos = cos_data.num_of_cos ;
+}
+
+static void bnx2x_dcbx_get_ets_pri_pg_tbl(struct bnx2x *bp,
+				u32 *set_configuration_ets_pg,
+				u32 *pri_pg_tbl)
+{
+	int i;
+
+	for (i = 0; i < DCBX_MAX_NUM_PRI_PG_ENTRIES; i++) {
+		set_configuration_ets_pg[i] = DCBX_PRI_PG_GET(pri_pg_tbl, i);
+
+		DP(NETIF_MSG_LINK, "set_configuration_ets_pg[%d] = 0x%x\n",
+		   i, set_configuration_ets_pg[i]);
+	}
+}
+
+/*******************************************************************************
+ * Description: Fill pfc_config struct that will be sent in DCBX start ramrod
+ *
+ * Return:
+ ******************************************************************************/
+static void bnx2x_pfc_fw_struct_e2(struct bnx2x *bp)
+{
+	struct flow_control_configuration   *pfc_fw_cfg = NULL;
+	u16 pri_bit = 0;
+	u8 cos = 0, pri = 0;
+	struct priority_cos *tt2cos;
+	u32 *ttp = bp->dcbx_port_params.app.traffic_type_priority;
+
+	pfc_fw_cfg = (struct flow_control_configuration *)
+					bnx2x_sp(bp, pfc_config);
+	memset(pfc_fw_cfg, 0, sizeof(struct flow_control_configuration));
+
+	/*shortcut*/
+	tt2cos = pfc_fw_cfg->traffic_type_to_priority_cos;
+
+	/* Fw version should be incremented each update */
+	pfc_fw_cfg->dcb_version = ++bp->dcb_version;
+	pfc_fw_cfg->dcb_enabled = DCB_ENABLED;
+
+	/* Default initialization */
+	for (pri = 0; pri < MAX_PFC_TRAFFIC_TYPES ; pri++) {
+		tt2cos[pri].priority = LLFC_TRAFFIC_TYPE_TO_PRIORITY_UNMAPPED;
+		tt2cos[pri].cos = 0;
+	}
+
+	/* Fill priority parameters */
+	for (pri = 0; pri < LLFC_DRIVER_TRAFFIC_TYPE_MAX; pri++) {
+		tt2cos[pri].priority = ttp[pri];
+		pri_bit = 1 << tt2cos[pri].priority;
+
+		/* Fill COS parameters based on COS calculated to
+		 * make it more generally for future use */
+		for (cos = 0; cos < bp->dcbx_port_params.ets.num_of_cos; cos++)
+			if (bp->dcbx_port_params.ets.cos_params[cos].
+						pri_bitmask & pri_bit)
+					tt2cos[pri].cos = cos;
+	}
+	bnx2x_dcbx_print_cos_params(bp,	pfc_fw_cfg);
+}
+/* DCB netlink */
+#ifdef BCM_DCB
+#include <linux/dcbnl.h>
+
+#define BNX2X_DCBX_CAPS		(DCB_CAP_DCBX_LLD_MANAGED | \
+				DCB_CAP_DCBX_VER_CEE | DCB_CAP_DCBX_STATIC)
+
+static inline bool bnx2x_dcbnl_set_valid(struct bnx2x *bp)
+{
+	/* validate dcbnl call that may change HW state:
+	 * DCB is on and DCBX mode was SUCCESSFULLY set by the user.
+	 */
+	return bp->dcb_state && bp->dcbx_mode_uset;
+}
+
+static u8 bnx2x_dcbnl_get_state(struct net_device *netdev)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "state = %d\n", bp->dcb_state);
+	return bp->dcb_state;
+}
+
+static u8 bnx2x_dcbnl_set_state(struct net_device *netdev, u8 state)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "state = %s\n", state ? "on" : "off");
+
+	bnx2x_dcbx_set_state(bp, (state ? true : false), bp->dcbx_enabled);
+	return 0;
+}
+
+static void bnx2x_dcbnl_get_perm_hw_addr(struct net_device *netdev,
+					 u8 *perm_addr)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "GET-PERM-ADDR\n");
+
+	/* first the HW mac address */
+	memcpy(perm_addr, netdev->dev_addr, netdev->addr_len);
+
+#ifdef BCM_CNIC
+	/* second SAN address */
+	memcpy(perm_addr+netdev->addr_len, bp->fip_mac, netdev->addr_len);
+#endif
+}
+
+static void bnx2x_dcbnl_set_pg_tccfg_tx(struct net_device *netdev, int prio,
+					u8 prio_type, u8 pgid, u8 bw_pct,
+					u8 up_map)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+
+	DP(NETIF_MSG_LINK, "prio[%d] = %d\n", prio, pgid);
+	if (!bnx2x_dcbnl_set_valid(bp) || prio >= DCBX_MAX_NUM_PRI_PG_ENTRIES)
+		return;
+
+	/**
+	 * bw_pct ingnored -	band-width percentage devision between user
+	 *			priorities within the same group is not
+	 *			standard and hence not supported
+	 *
+	 * prio_type igonred -	priority levels within the same group are not
+	 *			standard and hence are not supported. According
+	 *			to the standard pgid 15 is dedicated to strict
+	 *			prioirty traffic (on the port level).
+	 *
+	 * up_map ignored
+	 */
+
+	bp->dcbx_config_params.admin_configuration_ets_pg[prio] = pgid;
+	bp->dcbx_config_params.admin_ets_configuration_tx_enable = 1;
+}
+
+static void bnx2x_dcbnl_set_pg_bwgcfg_tx(struct net_device *netdev,
+					 int pgid, u8 bw_pct)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "pgid[%d] = %d\n", pgid, bw_pct);
+
+	if (!bnx2x_dcbnl_set_valid(bp) || pgid >= DCBX_MAX_NUM_PG_BW_ENTRIES)
+		return;
+
+	bp->dcbx_config_params.admin_configuration_bw_precentage[pgid] = bw_pct;
+	bp->dcbx_config_params.admin_ets_configuration_tx_enable = 1;
+}
+
+static void bnx2x_dcbnl_set_pg_tccfg_rx(struct net_device *netdev, int prio,
+					u8 prio_type, u8 pgid, u8 bw_pct,
+					u8 up_map)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "Nothing to set; No RX support\n");
+}
+
+static void bnx2x_dcbnl_set_pg_bwgcfg_rx(struct net_device *netdev,
+					 int pgid, u8 bw_pct)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "Nothing to set; No RX support\n");
+}
+
+static void bnx2x_dcbnl_get_pg_tccfg_tx(struct net_device *netdev, int prio,
+					u8 *prio_type, u8 *pgid, u8 *bw_pct,
+					u8 *up_map)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "prio = %d\n", prio);
+
+	/**
+	 * bw_pct ingnored -	band-width percentage devision between user
+	 *			priorities within the same group is not
+	 *			standard and hence not supported
+	 *
+	 * prio_type igonred -	priority levels within the same group are not
+	 *			standard and hence are not supported. According
+	 *			to the standard pgid 15 is dedicated to strict
+	 *			prioirty traffic (on the port level).
+	 *
+	 * up_map ignored
+	 */
+	*up_map = *bw_pct = *prio_type = *pgid = 0;
+
+	if (!bp->dcb_state || prio >= DCBX_MAX_NUM_PRI_PG_ENTRIES)
+		return;
+
+	*pgid = DCBX_PRI_PG_GET(bp->dcbx_local_feat.ets.pri_pg_tbl, prio);
+}
+
+static void bnx2x_dcbnl_get_pg_bwgcfg_tx(struct net_device *netdev,
+					 int pgid, u8 *bw_pct)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "pgid = %d\n", pgid);
+
+	*bw_pct = 0;
+
+	if (!bp->dcb_state || pgid >= DCBX_MAX_NUM_PG_BW_ENTRIES)
+		return;
+
+	*bw_pct = DCBX_PG_BW_GET(bp->dcbx_local_feat.ets.pg_bw_tbl, pgid);
+}
+
+static void bnx2x_dcbnl_get_pg_tccfg_rx(struct net_device *netdev, int prio,
+					u8 *prio_type, u8 *pgid, u8 *bw_pct,
+					u8 *up_map)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "Nothing to get; No RX support\n");
+
+	*prio_type = *pgid = *bw_pct = *up_map = 0;
+}
+
+static void bnx2x_dcbnl_get_pg_bwgcfg_rx(struct net_device *netdev,
+					 int pgid, u8 *bw_pct)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "Nothing to get; No RX support\n");
+
+	*bw_pct = 0;
+}
+
+static void bnx2x_dcbnl_set_pfc_cfg(struct net_device *netdev, int prio,
+				    u8 setting)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "prio[%d] = %d\n", prio, setting);
+
+	if (!bnx2x_dcbnl_set_valid(bp) || prio >= MAX_PFC_PRIORITIES)
+		return;
+
+	bp->dcbx_config_params.admin_pfc_bitmap |= ((setting ? 1 : 0) << prio);
+
+	if (setting)
+		bp->dcbx_config_params.admin_pfc_tx_enable = 1;
+}
+
+static void bnx2x_dcbnl_get_pfc_cfg(struct net_device *netdev, int prio,
+				    u8 *setting)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "prio = %d\n", prio);
+
+	*setting = 0;
+
+	if (!bp->dcb_state || prio >= MAX_PFC_PRIORITIES)
+		return;
+
+	*setting = (bp->dcbx_local_feat.pfc.pri_en_bitmap >> prio) & 0x1;
+}
+
+static u8 bnx2x_dcbnl_set_all(struct net_device *netdev)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	int rc = 0;
+
+	DP(NETIF_MSG_LINK, "SET-ALL\n");
+
+	if (!bnx2x_dcbnl_set_valid(bp))
+		return 1;
+
+	if (bp->recovery_state != BNX2X_RECOVERY_DONE) {
+		netdev_err(bp->dev, "Handling parity error recovery. "
+				"Try again later\n");
+		return 1;
+	}
+	if (netif_running(bp->dev)) {
+		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
+		rc = bnx2x_nic_load(bp, LOAD_NORMAL);
+	}
+	DP(NETIF_MSG_LINK, "set_dcbx_params done (%d)\n", rc);
+	if (rc)
+		return 1;
+
+	return 0;
+}
+
+static u8 bnx2x_dcbnl_get_cap(struct net_device *netdev, int capid, u8 *cap)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	u8 rval = 0;
+
+	if (bp->dcb_state) {
+		switch (capid) {
+		case DCB_CAP_ATTR_PG:
+			*cap = true;
+			break;
+		case DCB_CAP_ATTR_PFC:
+			*cap = true;
+			break;
+		case DCB_CAP_ATTR_UP2TC:
+			*cap = false;
+			break;
+		case DCB_CAP_ATTR_PG_TCS:
+			*cap = 0x80;	/* 8 priorities for PGs */
+			break;
+		case DCB_CAP_ATTR_PFC_TCS:
+			*cap = 0x80;	/* 8 priorities for PFC */
+			break;
+		case DCB_CAP_ATTR_GSP:
+			*cap = true;
+			break;
+		case DCB_CAP_ATTR_BCN:
+			*cap = false;
+			break;
+		case DCB_CAP_ATTR_DCBX:
+			*cap = BNX2X_DCBX_CAPS;
+		default:
+			rval = -EINVAL;
+			break;
+		}
+	} else
+		rval = -EINVAL;
+
+	DP(NETIF_MSG_LINK, "capid %d:%x\n", capid, *cap);
+	return rval;
+}
+
+static u8 bnx2x_dcbnl_get_numtcs(struct net_device *netdev, int tcid, u8 *num)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	u8 rval = 0;
+
+	DP(NETIF_MSG_LINK, "tcid %d\n", tcid);
+
+	if (bp->dcb_state) {
+		switch (tcid) {
+		case DCB_NUMTCS_ATTR_PG:
+			*num = E2_NUM_OF_COS;
+			break;
+		case DCB_NUMTCS_ATTR_PFC:
+			*num = E2_NUM_OF_COS;
+			break;
+		default:
+			rval = -EINVAL;
+			break;
+		}
+	} else
+		rval = -EINVAL;
+
+	return rval;
+}
+
+static u8 bnx2x_dcbnl_set_numtcs(struct net_device *netdev, int tcid, u8 num)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "num tcs = %d; Not supported\n", num);
+	return -EINVAL;
+}
+
+static u8  bnx2x_dcbnl_get_pfc_state(struct net_device *netdev)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "state = %d\n", bp->dcbx_local_feat.pfc.enabled);
+
+	if (!bp->dcb_state)
+		return 0;
+
+	return bp->dcbx_local_feat.pfc.enabled;
+}
+
+static void bnx2x_dcbnl_set_pfc_state(struct net_device *netdev, u8 state)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "state = %s\n", state ? "on" : "off");
+
+	if (!bnx2x_dcbnl_set_valid(bp))
+		return;
+
+	bp->dcbx_config_params.admin_pfc_tx_enable =
+	bp->dcbx_config_params.admin_pfc_enable = (state ? 1 : 0);
+}
+
+static bool bnx2x_app_is_equal(struct dcbx_app_priority_entry *app_ent,
+			       u8 idtype, u16 idval)
+{
+	if (!(app_ent->appBitfield & DCBX_APP_ENTRY_VALID))
+		return false;
+
+	switch (idtype) {
+	case DCB_APP_IDTYPE_ETHTYPE:
+		if ((app_ent->appBitfield & DCBX_APP_ENTRY_SF_MASK) !=
+			DCBX_APP_SF_ETH_TYPE)
+			return false;
+		break;
+	case DCB_APP_IDTYPE_PORTNUM:
+		if ((app_ent->appBitfield & DCBX_APP_ENTRY_SF_MASK) !=
+			DCBX_APP_SF_PORT)
+			return false;
+		break;
+	default:
+		return false;
+	}
+	if (app_ent->app_id != idval)
+		return false;
+
+	return true;
+}
+
+static void bnx2x_admin_app_set_ent(
+	struct bnx2x_admin_priority_app_table *app_ent,
+	u8 idtype, u16 idval, u8 up)
+{
+	app_ent->valid = 1;
+
+	switch (idtype) {
+	case DCB_APP_IDTYPE_ETHTYPE:
+		app_ent->traffic_type = TRAFFIC_TYPE_ETH;
+		break;
+	case DCB_APP_IDTYPE_PORTNUM:
+		app_ent->traffic_type = TRAFFIC_TYPE_PORT;
+		break;
+	default:
+		break; /* never gets here */
+	}
+	app_ent->app_id = idval;
+	app_ent->priority = up;
+}
+
+static bool bnx2x_admin_app_is_equal(
+	struct bnx2x_admin_priority_app_table *app_ent,
+	u8 idtype, u16 idval)
+{
+	if (!app_ent->valid)
+		return false;
+
+	switch (idtype) {
+	case DCB_APP_IDTYPE_ETHTYPE:
+		if (app_ent->traffic_type != TRAFFIC_TYPE_ETH)
+			return false;
+		break;
+	case DCB_APP_IDTYPE_PORTNUM:
+		if (app_ent->traffic_type != TRAFFIC_TYPE_PORT)
+			return false;
+		break;
+	default:
+		return false;
+	}
+	if (app_ent->app_id != idval)
+		return false;
+
+	return true;
+}
+
+static int bnx2x_set_admin_app_up(struct bnx2x *bp, u8 idtype, u16 idval, u8 up)
+{
+	int i, ff;
+
+	/* iterate over the app entries looking for idtype and idval */
+	for (i = 0, ff = -1; i < 4; i++) {
+		struct bnx2x_admin_priority_app_table *app_ent =
+			&bp->dcbx_config_params.admin_priority_app_table[i];
+		if (bnx2x_admin_app_is_equal(app_ent, idtype, idval))
+			break;
+
+		if (ff < 0 && !app_ent->valid)
+			ff = i;
+	}
+	if (i < 4)
+		/* if found overwrite up */
+		bp->dcbx_config_params.
+			admin_priority_app_table[i].priority = up;
+	else if (ff >= 0)
+		/* not found use first-free */
+		bnx2x_admin_app_set_ent(
+			&bp->dcbx_config_params.admin_priority_app_table[ff],
+			idtype, idval, up);
+	else
+		/* app table is full */
+		return -EBUSY;
+
+	/* up configured, if not 0 make sure feature is enabled */
+	if (up)
+		bp->dcbx_config_params.admin_application_priority_tx_enable = 1;
+
+	return 0;
+}
+
+static u8 bnx2x_dcbnl_set_app_up(struct net_device *netdev, u8 idtype,
+				 u16 idval, u8 up)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+
+	DP(NETIF_MSG_LINK, "app_type %d, app_id %x, prio bitmap %d\n",
+	   idtype, idval, up);
+
+	if (!bnx2x_dcbnl_set_valid(bp))
+		return -EINVAL;
+
+	/* verify idtype */
+	switch (idtype) {
+	case DCB_APP_IDTYPE_ETHTYPE:
+	case DCB_APP_IDTYPE_PORTNUM:
+		break;
+	default:
+		return -EINVAL;
+	}
+	return bnx2x_set_admin_app_up(bp, idtype, idval, up);
+}
+
+static u8 bnx2x_dcbnl_get_app_up(struct net_device *netdev, u8 idtype,
+				 u16 idval)
+{
+	int i;
+	u8 up = 0;
+
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "app_type %d, app_id 0x%x\n", idtype, idval);
+
+	/* iterate over the app entries looking for idtype and idval */
+	for (i = 0; i < DCBX_MAX_APP_PROTOCOL; i++)
+		if (bnx2x_app_is_equal(&bp->dcbx_local_feat.app.app_pri_tbl[i],
+				       idtype, idval))
+			break;
+
+	if (i < DCBX_MAX_APP_PROTOCOL)
+		/* if found return up */
+		up = bp->dcbx_local_feat.app.app_pri_tbl[i].pri_bitmap;
+	else
+		DP(NETIF_MSG_LINK, "app not found\n");
+
+	return up;
+}
+
+static u8 bnx2x_dcbnl_get_dcbx(struct net_device *netdev)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	u8 state;
+
+	state = DCB_CAP_DCBX_LLD_MANAGED | DCB_CAP_DCBX_VER_CEE;
+
+	if (bp->dcbx_enabled == BNX2X_DCBX_ENABLED_ON_NEG_OFF)
+		state |= DCB_CAP_DCBX_STATIC;
+
+	return state;
+}
+
+static u8 bnx2x_dcbnl_set_dcbx(struct net_device *netdev, u8 state)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	DP(NETIF_MSG_LINK, "state = %02x\n", state);
+
+	/* set dcbx mode */
+
+	if ((state & BNX2X_DCBX_CAPS) != state) {
+		BNX2X_ERR("Requested DCBX mode %x is beyond advertised "
+			  "capabilities\n", state);
+		return 1;
+	}
+
+	if (bp->dcb_state != BNX2X_DCB_STATE_ON) {
+		BNX2X_ERR("DCB turned off, DCBX configuration is invalid\n");
+		return 1;
+	}
+
+	if (state & DCB_CAP_DCBX_STATIC)
+		bp->dcbx_enabled = BNX2X_DCBX_ENABLED_ON_NEG_OFF;
+	else
+		bp->dcbx_enabled = BNX2X_DCBX_ENABLED_ON_NEG_ON;
+
+	bp->dcbx_mode_uset = true;
+	return 0;
+}
+
+
+static u8 bnx2x_dcbnl_get_featcfg(struct net_device *netdev, int featid,
+				  u8 *flags)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	u8 rval = 0;
+
+	DP(NETIF_MSG_LINK, "featid %d\n", featid);
+
+	if (bp->dcb_state) {
+		*flags = 0;
+		switch (featid) {
+		case DCB_FEATCFG_ATTR_PG:
+			if (bp->dcbx_local_feat.ets.enabled)
+				*flags |= DCB_FEATCFG_ENABLE;
+			if (bp->dcbx_error & DCBX_LOCAL_ETS_ERROR)
+				*flags |= DCB_FEATCFG_ERROR;
+			break;
+		case DCB_FEATCFG_ATTR_PFC:
+			if (bp->dcbx_local_feat.pfc.enabled)
+				*flags |= DCB_FEATCFG_ENABLE;
+			if (bp->dcbx_error & (DCBX_LOCAL_PFC_ERROR |
+			    DCBX_LOCAL_PFC_MISMATCH))
+				*flags |= DCB_FEATCFG_ERROR;
+			break;
+		case DCB_FEATCFG_ATTR_APP:
+			if (bp->dcbx_local_feat.app.enabled)
+				*flags |= DCB_FEATCFG_ENABLE;
+			if (bp->dcbx_error & (DCBX_LOCAL_APP_ERROR |
+			    DCBX_LOCAL_APP_MISMATCH))
+				*flags |= DCB_FEATCFG_ERROR;
+			break;
+		default:
+			rval = -EINVAL;
+			break;
+		}
+	} else
+		rval = -EINVAL;
+
+	return rval;
+}
+
+static u8 bnx2x_dcbnl_set_featcfg(struct net_device *netdev, int featid,
+				  u8 flags)
+{
+	struct bnx2x *bp = netdev_priv(netdev);
+	u8 rval = 0;
+
+	DP(NETIF_MSG_LINK, "featid = %d flags = %02x\n", featid, flags);
+
+	/* ignore the 'advertise' flag */
+	if (bnx2x_dcbnl_set_valid(bp)) {
+		switch (featid) {
+		case DCB_FEATCFG_ATTR_PG:
+			bp->dcbx_config_params.admin_ets_enable =
+				flags & DCB_FEATCFG_ENABLE ? 1 : 0;
+			bp->dcbx_config_params.admin_ets_willing =
+				flags & DCB_FEATCFG_WILLING ? 1 : 0;
+			break;
+		case DCB_FEATCFG_ATTR_PFC:
+			bp->dcbx_config_params.admin_pfc_enable =
+				flags & DCB_FEATCFG_ENABLE ? 1 : 0;
+			bp->dcbx_config_params.admin_pfc_willing =
+				flags & DCB_FEATCFG_WILLING ? 1 : 0;
+			break;
+		case DCB_FEATCFG_ATTR_APP:
+			/* ignore enable, always enabled */
+			bp->dcbx_config_params.admin_app_priority_willing =
+				flags & DCB_FEATCFG_WILLING ? 1 : 0;
+			break;
+		default:
+			rval = -EINVAL;
+			break;
+		}
+	} else
+		rval = -EINVAL;
+
+	return rval;
+}
+
+const struct dcbnl_rtnl_ops bnx2x_dcbnl_ops = {
+	.getstate       = bnx2x_dcbnl_get_state,
+	.setstate       = bnx2x_dcbnl_set_state,
+	.getpermhwaddr  = bnx2x_dcbnl_get_perm_hw_addr,
+	.setpgtccfgtx   = bnx2x_dcbnl_set_pg_tccfg_tx,
+	.setpgbwgcfgtx  = bnx2x_dcbnl_set_pg_bwgcfg_tx,
+	.setpgtccfgrx   = bnx2x_dcbnl_set_pg_tccfg_rx,
+	.setpgbwgcfgrx  = bnx2x_dcbnl_set_pg_bwgcfg_rx,
+	.getpgtccfgtx   = bnx2x_dcbnl_get_pg_tccfg_tx,
+	.getpgbwgcfgtx  = bnx2x_dcbnl_get_pg_bwgcfg_tx,
+	.getpgtccfgrx   = bnx2x_dcbnl_get_pg_tccfg_rx,
+	.getpgbwgcfgrx  = bnx2x_dcbnl_get_pg_bwgcfg_rx,
+	.setpfccfg      = bnx2x_dcbnl_set_pfc_cfg,
+	.getpfccfg      = bnx2x_dcbnl_get_pfc_cfg,
+	.setall         = bnx2x_dcbnl_set_all,
+	.getcap         = bnx2x_dcbnl_get_cap,
+	.getnumtcs      = bnx2x_dcbnl_get_numtcs,
+	.setnumtcs      = bnx2x_dcbnl_set_numtcs,
+	.getpfcstate    = bnx2x_dcbnl_get_pfc_state,
+	.setpfcstate    = bnx2x_dcbnl_set_pfc_state,
+	.getapp         = bnx2x_dcbnl_get_app_up,
+	.setapp         = bnx2x_dcbnl_set_app_up,
+	.getdcbx        = bnx2x_dcbnl_get_dcbx,
+	.setdcbx        = bnx2x_dcbnl_set_dcbx,
+	.getfeatcfg     = bnx2x_dcbnl_get_featcfg,
+	.setfeatcfg     = bnx2x_dcbnl_set_featcfg,
+};
+
+#endif /* BCM_DCB */
diff --git a/drivers/net/bnx2x/bnx2x_dcb.h b/drivers/net/bnx2x/bnx2x_dcb.h
new file mode 100644
index 00000000000..f650f98e409
--- /dev/null
+++ b/drivers/net/bnx2x/bnx2x_dcb.h
@@ -0,0 +1,196 @@
+/* bnx2x_dcb.h: Broadcom Everest network driver.
+ *
+ * Copyright 2009-2010 Broadcom Corporation
+ *
+ * Unless you and Broadcom execute a separate written software license
+ * agreement governing use of this software, this software is licensed to you
+ * under the terms of the GNU General Public License version 2, available
+ * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
+ *
+ * Notwithstanding the above, under no circumstances may you combine this
+ * software in any way with any other Broadcom software provided under a
+ * license other than the GPL, without Broadcom's express prior written
+ * consent.
+ *
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Dmitry Kravkov
+ *
+ */
+#ifndef BNX2X_DCB_H
+#define BNX2X_DCB_H
+
+#include "bnx2x_hsi.h"
+
+#define LLFC_DRIVER_TRAFFIC_TYPE_MAX 3 /* NW, iSCSI, FCoE */
+struct bnx2x_dcbx_app_params {
+	u32 enabled;
+	u32 traffic_type_priority[LLFC_DRIVER_TRAFFIC_TYPE_MAX];
+};
+
+#define E2_NUM_OF_COS			2
+#define BNX2X_DCBX_COS_NOT_STRICT	0
+#define BNX2X_DCBX_COS_LOW_STRICT	1
+#define BNX2X_DCBX_COS_HIGH_STRICT	2
+
+struct bnx2x_dcbx_cos_params {
+	u32	bw_tbl;
+	u32	pri_bitmask;
+	u8	strict;
+	u8	pauseable;
+};
+
+struct bnx2x_dcbx_pg_params {
+	u32 enabled;
+	u8 num_of_cos; /* valid COS entries */
+	struct bnx2x_dcbx_cos_params	cos_params[E2_NUM_OF_COS];
+};
+
+struct bnx2x_dcbx_pfc_params {
+	u32 enabled;
+	u32 priority_non_pauseable_mask;
+};
+
+struct bnx2x_dcbx_port_params {
+	struct bnx2x_dcbx_pfc_params pfc;
+	struct bnx2x_dcbx_pg_params  ets;
+	struct bnx2x_dcbx_app_params app;
+};
+
+#define BNX2X_DCBX_CONFIG_INV_VALUE			(0xFFFFFFFF)
+#define BNX2X_DCBX_OVERWRITE_SETTINGS_DISABLE		0
+#define BNX2X_DCBX_OVERWRITE_SETTINGS_ENABLE		1
+#define BNX2X_DCBX_OVERWRITE_SETTINGS_INVALID	(BNX2X_DCBX_CONFIG_INV_VALUE)
+
+/*******************************************************************************
+ * LLDP protocol configuration parameters.
+ ******************************************************************************/
+struct bnx2x_config_lldp_params {
+	u32 overwrite_settings;
+	u32 msg_tx_hold;
+	u32 msg_fast_tx;
+	u32 tx_credit_max;
+	u32 msg_tx_interval;
+	u32 tx_fast;
+};
+
+struct bnx2x_admin_priority_app_table {
+		u32 valid;
+		u32 priority;
+#define INVALID_TRAFFIC_TYPE_PRIORITY	(0xFFFFFFFF)
+		u32 traffic_type;
+#define TRAFFIC_TYPE_ETH		0
+#define TRAFFIC_TYPE_PORT		1
+		u32 app_id;
+};
+
+/*******************************************************************************
+ * DCBX protocol configuration parameters.
+ ******************************************************************************/
+struct bnx2x_config_dcbx_params {
+	u32 overwrite_settings;
+	u32 admin_dcbx_version;
+	u32 admin_ets_enable;
+	u32 admin_pfc_enable;
+	u32 admin_tc_supported_tx_enable;
+	u32 admin_ets_configuration_tx_enable;
+	u32 admin_ets_recommendation_tx_enable;
+	u32 admin_pfc_tx_enable;
+	u32 admin_application_priority_tx_enable;
+	u32 admin_ets_willing;
+	u32 admin_ets_reco_valid;
+	u32 admin_pfc_willing;
+	u32 admin_app_priority_willing;
+	u32 admin_configuration_bw_precentage[8];
+	u32 admin_configuration_ets_pg[8];
+	u32 admin_recommendation_bw_precentage[8];
+	u32 admin_recommendation_ets_pg[8];
+	u32 admin_pfc_bitmap;
+	struct bnx2x_admin_priority_app_table admin_priority_app_table[4];
+	u32 admin_default_priority;
+};
+
+#define GET_FLAGS(flags, bits)		((flags) & (bits))
+#define SET_FLAGS(flags, bits)		((flags) |= (bits))
+#define RESET_FLAGS(flags, bits)	((flags) &= ~(bits))
+
+enum {
+	DCBX_READ_LOCAL_MIB,
+	DCBX_READ_REMOTE_MIB
+};
+
+#define ETH_TYPE_FCOE		(0x8906)
+#define TCP_PORT_ISCSI		(0xCBC)
+
+#define PFC_VALUE_FRAME_SIZE				(512)
+#define PFC_QUANTA_IN_NANOSEC_FROM_SPEED_MEGA(mega_speed)  \
+				((1000 * PFC_VALUE_FRAME_SIZE)/(mega_speed))
+
+#define PFC_BRB1_REG_HIGH_LLFC_LOW_THRESHOLD			130
+#define PFC_BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD			170
+
+
+
+struct cos_entry_help_data {
+	u32			pri_join_mask;
+	u32			cos_bw;
+	u8			strict;
+	bool			pausable;
+};
+
+struct cos_help_data {
+	struct cos_entry_help_data	data[E2_NUM_OF_COS];
+	u8				num_of_cos;
+};
+
+#define DCBX_ILLEGAL_PG				(0xFF)
+#define DCBX_PFC_PRI_MASK			(0xFF)
+#define DCBX_STRICT_PRIORITY			(15)
+#define DCBX_INVALID_COS_BW			(0xFFFFFFFF)
+#define DCBX_PFC_PRI_NON_PAUSE_MASK(bp)		\
+			((bp)->dcbx_port_params.pfc.priority_non_pauseable_mask)
+#define DCBX_PFC_PRI_PAUSE_MASK(bp)		\
+					((u8)~DCBX_PFC_PRI_NON_PAUSE_MASK(bp))
+#define DCBX_PFC_PRI_GET_PAUSE(bp, pg_pri)	\
+				((pg_pri) & (DCBX_PFC_PRI_PAUSE_MASK(bp)))
+#define DCBX_PFC_PRI_GET_NON_PAUSE(bp, pg_pri)	\
+			(DCBX_PFC_PRI_NON_PAUSE_MASK(bp) & (pg_pri))
+#define IS_DCBX_PFC_PRI_ONLY_PAUSE(bp, pg_pri)	\
+			(pg_pri == DCBX_PFC_PRI_GET_PAUSE((bp), (pg_pri)))
+#define IS_DCBX_PFC_PRI_ONLY_NON_PAUSE(bp, pg_pri)\
+			((pg_pri) == DCBX_PFC_PRI_GET_NON_PAUSE((bp), (pg_pri)))
+#define IS_DCBX_PFC_PRI_MIX_PAUSE(bp, pg_pri)	\
+			(!(IS_DCBX_PFC_PRI_ONLY_NON_PAUSE((bp), (pg_pri)) || \
+			 IS_DCBX_PFC_PRI_ONLY_PAUSE((bp), (pg_pri))))
+
+
+struct pg_entry_help_data {
+	u8	num_of_dif_pri;
+	u8	pg;
+	u32	pg_priority;
+};
+
+struct pg_help_data {
+	struct pg_entry_help_data	data[LLFC_DRIVER_TRAFFIC_TYPE_MAX];
+	u8				num_of_pg;
+};
+
+/* forward DCB/PFC related declarations */
+struct bnx2x;
+void bnx2x_dcb_init_intmem_pfc(struct bnx2x *bp);
+void bnx2x_dcbx_update(struct work_struct *work);
+void bnx2x_dcbx_init_params(struct bnx2x *bp);
+void bnx2x_dcbx_set_state(struct bnx2x *bp, bool dcb_on, u32 dcbx_enabled);
+
+enum {
+	BNX2X_DCBX_STATE_NEG_RECEIVED = 0x1,
+	BNX2X_DCBX_STATE_TX_PAUSED = 0x2,
+	BNX2X_DCBX_STATE_TX_RELEASED = 0x4
+};
+void bnx2x_dcbx_set_params(struct bnx2x *bp, u32 state);
+
+/* DCB netlink */
+#ifdef BCM_DCB
+extern const struct dcbnl_rtnl_ops bnx2x_dcbnl_ops;
+#endif /* BCM_DCB */
+
+#endif /* BNX2X_DCB_H */
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index d02ffbdc9f0..99c672d894c 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -25,6 +25,143 @@
 #include "bnx2x_cmn.h"
 #include "bnx2x_dump.h"
 
+/* Note: in the format strings below %s is replaced by the queue-name which is
+ * either its index or 'fcoe' for the fcoe queue. Make sure the format string
+ * length does not exceed ETH_GSTRING_LEN - MAX_QUEUE_NAME_LEN + 2
+ */
+#define MAX_QUEUE_NAME_LEN	4
+static const struct {
+	long offset;
+	int size;
+	char string[ETH_GSTRING_LEN];
+} bnx2x_q_stats_arr[] = {
+/* 1 */	{ Q_STATS_OFFSET32(total_bytes_received_hi), 8, "[%s]: rx_bytes" },
+	{ Q_STATS_OFFSET32(error_bytes_received_hi),
+						8, "[%s]: rx_error_bytes" },
+	{ Q_STATS_OFFSET32(total_unicast_packets_received_hi),
+						8, "[%s]: rx_ucast_packets" },
+	{ Q_STATS_OFFSET32(total_multicast_packets_received_hi),
+						8, "[%s]: rx_mcast_packets" },
+	{ Q_STATS_OFFSET32(total_broadcast_packets_received_hi),
+						8, "[%s]: rx_bcast_packets" },
+	{ Q_STATS_OFFSET32(no_buff_discard_hi),	8, "[%s]: rx_discards" },
+	{ Q_STATS_OFFSET32(rx_err_discard_pkt),
+					 4, "[%s]: rx_phy_ip_err_discards"},
+	{ Q_STATS_OFFSET32(rx_skb_alloc_failed),
+					 4, "[%s]: rx_skb_alloc_discard" },
+	{ Q_STATS_OFFSET32(hw_csum_err), 4, "[%s]: rx_csum_offload_errors" },
+
+/* 10 */{ Q_STATS_OFFSET32(total_bytes_transmitted_hi),	8, "[%s]: tx_bytes" },
+	{ Q_STATS_OFFSET32(total_unicast_packets_transmitted_hi),
+						8, "[%s]: tx_ucast_packets" },
+	{ Q_STATS_OFFSET32(total_multicast_packets_transmitted_hi),
+						8, "[%s]: tx_mcast_packets" },
+	{ Q_STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
+						8, "[%s]: tx_bcast_packets" }
+};
+
+#define BNX2X_NUM_Q_STATS ARRAY_SIZE(bnx2x_q_stats_arr)
+
+static const struct {
+	long offset;
+	int size;
+	u32 flags;
+#define STATS_FLAGS_PORT		1
+#define STATS_FLAGS_FUNC		2
+#define STATS_FLAGS_BOTH		(STATS_FLAGS_FUNC | STATS_FLAGS_PORT)
+	char string[ETH_GSTRING_LEN];
+} bnx2x_stats_arr[] = {
+/* 1 */	{ STATS_OFFSET32(total_bytes_received_hi),
+				8, STATS_FLAGS_BOTH, "rx_bytes" },
+	{ STATS_OFFSET32(error_bytes_received_hi),
+				8, STATS_FLAGS_BOTH, "rx_error_bytes" },
+	{ STATS_OFFSET32(total_unicast_packets_received_hi),
+				8, STATS_FLAGS_BOTH, "rx_ucast_packets" },
+	{ STATS_OFFSET32(total_multicast_packets_received_hi),
+				8, STATS_FLAGS_BOTH, "rx_mcast_packets" },
+	{ STATS_OFFSET32(total_broadcast_packets_received_hi),
+				8, STATS_FLAGS_BOTH, "rx_bcast_packets" },
+	{ STATS_OFFSET32(rx_stat_dot3statsfcserrors_hi),
+				8, STATS_FLAGS_PORT, "rx_crc_errors" },
+	{ STATS_OFFSET32(rx_stat_dot3statsalignmenterrors_hi),
+				8, STATS_FLAGS_PORT, "rx_align_errors" },
+	{ STATS_OFFSET32(rx_stat_etherstatsundersizepkts_hi),
+				8, STATS_FLAGS_PORT, "rx_undersize_packets" },
+	{ STATS_OFFSET32(etherstatsoverrsizepkts_hi),
+				8, STATS_FLAGS_PORT, "rx_oversize_packets" },
+/* 10 */{ STATS_OFFSET32(rx_stat_etherstatsfragments_hi),
+				8, STATS_FLAGS_PORT, "rx_fragments" },
+	{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi),
+				8, STATS_FLAGS_PORT, "rx_jabbers" },
+	{ STATS_OFFSET32(no_buff_discard_hi),
+				8, STATS_FLAGS_BOTH, "rx_discards" },
+	{ STATS_OFFSET32(mac_filter_discard),
+				4, STATS_FLAGS_PORT, "rx_filtered_packets" },
+	{ STATS_OFFSET32(xxoverflow_discard),
+				4, STATS_FLAGS_PORT, "rx_fw_discards" },
+	{ STATS_OFFSET32(brb_drop_hi),
+				8, STATS_FLAGS_PORT, "rx_brb_discard" },
+	{ STATS_OFFSET32(brb_truncate_hi),
+				8, STATS_FLAGS_PORT, "rx_brb_truncate" },
+	{ STATS_OFFSET32(pause_frames_received_hi),
+				8, STATS_FLAGS_PORT, "rx_pause_frames" },
+	{ STATS_OFFSET32(rx_stat_maccontrolframesreceived_hi),
+				8, STATS_FLAGS_PORT, "rx_mac_ctrl_frames" },
+	{ STATS_OFFSET32(nig_timer_max),
+			4, STATS_FLAGS_PORT, "rx_constant_pause_events" },
+/* 20 */{ STATS_OFFSET32(rx_err_discard_pkt),
+				4, STATS_FLAGS_BOTH, "rx_phy_ip_err_discards"},
+	{ STATS_OFFSET32(rx_skb_alloc_failed),
+				4, STATS_FLAGS_BOTH, "rx_skb_alloc_discard" },
+	{ STATS_OFFSET32(hw_csum_err),
+				4, STATS_FLAGS_BOTH, "rx_csum_offload_errors" },
+
+	{ STATS_OFFSET32(total_bytes_transmitted_hi),
+				8, STATS_FLAGS_BOTH, "tx_bytes" },
+	{ STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi),
+				8, STATS_FLAGS_PORT, "tx_error_bytes" },
+	{ STATS_OFFSET32(total_unicast_packets_transmitted_hi),
+				8, STATS_FLAGS_BOTH, "tx_ucast_packets" },
+	{ STATS_OFFSET32(total_multicast_packets_transmitted_hi),
+				8, STATS_FLAGS_BOTH, "tx_mcast_packets" },
+	{ STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
+				8, STATS_FLAGS_BOTH, "tx_bcast_packets" },
+	{ STATS_OFFSET32(tx_stat_dot3statsinternalmactransmiterrors_hi),
+				8, STATS_FLAGS_PORT, "tx_mac_errors" },
+	{ STATS_OFFSET32(rx_stat_dot3statscarriersenseerrors_hi),
+				8, STATS_FLAGS_PORT, "tx_carrier_errors" },
+/* 30 */{ STATS_OFFSET32(tx_stat_dot3statssinglecollisionframes_hi),
+				8, STATS_FLAGS_PORT, "tx_single_collisions" },
+	{ STATS_OFFSET32(tx_stat_dot3statsmultiplecollisionframes_hi),
+				8, STATS_FLAGS_PORT, "tx_multi_collisions" },
+	{ STATS_OFFSET32(tx_stat_dot3statsdeferredtransmissions_hi),
+				8, STATS_FLAGS_PORT, "tx_deferred" },
+	{ STATS_OFFSET32(tx_stat_dot3statsexcessivecollisions_hi),
+				8, STATS_FLAGS_PORT, "tx_excess_collisions" },
+	{ STATS_OFFSET32(tx_stat_dot3statslatecollisions_hi),
+				8, STATS_FLAGS_PORT, "tx_late_collisions" },
+	{ STATS_OFFSET32(tx_stat_etherstatscollisions_hi),
+				8, STATS_FLAGS_PORT, "tx_total_collisions" },
+	{ STATS_OFFSET32(tx_stat_etherstatspkts64octets_hi),
+				8, STATS_FLAGS_PORT, "tx_64_byte_packets" },
+	{ STATS_OFFSET32(tx_stat_etherstatspkts65octetsto127octets_hi),
+			8, STATS_FLAGS_PORT, "tx_65_to_127_byte_packets" },
+	{ STATS_OFFSET32(tx_stat_etherstatspkts128octetsto255octets_hi),
+			8, STATS_FLAGS_PORT, "tx_128_to_255_byte_packets" },
+	{ STATS_OFFSET32(tx_stat_etherstatspkts256octetsto511octets_hi),
+			8, STATS_FLAGS_PORT, "tx_256_to_511_byte_packets" },
+/* 40 */{ STATS_OFFSET32(tx_stat_etherstatspkts512octetsto1023octets_hi),
+			8, STATS_FLAGS_PORT, "tx_512_to_1023_byte_packets" },
+	{ STATS_OFFSET32(etherstatspkts1024octetsto1522octets_hi),
+			8, STATS_FLAGS_PORT, "tx_1024_to_1522_byte_packets" },
+	{ STATS_OFFSET32(etherstatspktsover1522octets_hi),
+			8, STATS_FLAGS_PORT, "tx_1523_to_9022_byte_packets" },
+	{ STATS_OFFSET32(pause_frames_sent_hi),
+				8, STATS_FLAGS_PORT, "tx_pause_frames" }
+};
+
+#define BNX2X_NUM_STATS		ARRAY_SIZE(bnx2x_stats_arr)
+
 static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -45,14 +182,9 @@ static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		cmd->speed = bp->link_params.req_line_speed[cfg_idx];
 		cmd->duplex = bp->link_params.req_duplex[cfg_idx];
 	}
-	if (IS_MF(bp)) {
-		u16 vn_max_rate = ((bp->mf_config[BP_VN(bp)] &
-			FUNC_MF_CFG_MAX_BW_MASK) >> FUNC_MF_CFG_MAX_BW_SHIFT) *
-			100;
 
-		if (vn_max_rate < cmd->speed)
-			cmd->speed = vn_max_rate;
-	}
+	if (IS_MF(bp))
+		cmd->speed = bnx2x_get_mf_speed(bp);
 
 	if (bp->port.supported[cfg_idx] & SUPPORTED_TP)
 		cmd->port = PORT_TP;
@@ -87,18 +219,57 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct bnx2x *bp = netdev_priv(dev);
 	u32 advertising, cfg_idx, old_multi_phy_config, new_multi_phy_config;
+	u32 speed;
 
-	if (IS_MF(bp))
+	if (IS_MF_SD(bp))
 		return 0;
 
 	DP(NETIF_MSG_LINK, "ethtool_cmd: cmd %d\n"
-	   DP_LEVEL "  supported 0x%x  advertising 0x%x  speed %d\n"
-	   DP_LEVEL "  duplex %d  port %d  phy_address %d  transceiver %d\n"
-	   DP_LEVEL "  autoneg %d  maxtxpkt %d  maxrxpkt %d\n",
+	   "  supported 0x%x  advertising 0x%x  speed %d speed_hi %d\n"
+	   "  duplex %d  port %d  phy_address %d  transceiver %d\n"
+	   "  autoneg %d  maxtxpkt %d  maxrxpkt %d\n",
 	   cmd->cmd, cmd->supported, cmd->advertising, cmd->speed,
+	   cmd->speed_hi,
 	   cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
 	   cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt);
 
+	speed = cmd->speed;
+	speed |= (cmd->speed_hi << 16);
+
+	if (IS_MF_SI(bp)) {
+		u32 param = 0;
+		u32 line_speed = bp->link_vars.line_speed;
+
+		/* use 10G if no link detected */
+		if (!line_speed)
+			line_speed = 10000;
+
+		if (bp->common.bc_ver < REQ_BC_VER_4_SET_MF_BW) {
+			BNX2X_DEV_INFO("To set speed BC %X or higher "
+				       "is required, please upgrade BC\n",
+				       REQ_BC_VER_4_SET_MF_BW);
+			return -EINVAL;
+		}
+		if (line_speed < speed) {
+			BNX2X_DEV_INFO("New speed should be less or equal "
+				       "to actual line speed\n");
+			return -EINVAL;
+		}
+		/* load old values */
+		param = bp->mf_config[BP_VN(bp)];
+
+		/* leave only MIN value */
+		param &= FUNC_MF_CFG_MIN_BW_MASK;
+
+		/* set new MAX value */
+		param |= (((speed * 100) / line_speed)
+				 << FUNC_MF_CFG_MAX_BW_SHIFT)
+				  & FUNC_MF_CFG_MAX_BW_MASK;
+
+		bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, param);
+		return 0;
+	}
+
 	cfg_idx = bnx2x_get_link_cfg_idx(bp);
 	old_multi_phy_config = bp->link_params.multi_phy_config;
 	switch (cmd->port) {
@@ -168,8 +339,6 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	} else { /* forced speed */
 		/* advertise the requested speed and duplex if supported */
-		u32 speed = cmd->speed;
-		speed |= (cmd->speed_hi << 16);
 		switch (speed) {
 		case SPEED_10:
 			if (cmd->duplex == DUPLEX_FULL) {
@@ -1286,7 +1455,7 @@ static int bnx2x_test_registers(struct bnx2x *bp)
 
 			save_val = REG_RD(bp, offset);
 
-			REG_WR(bp, offset, (wr_val & mask));
+			REG_WR(bp, offset, wr_val & mask);
 
 			val = REG_RD(bp, offset);
 
@@ -1499,8 +1668,15 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
 	 * updates that have been performed while interrupts were
 	 * disabled.
 	 */
-	if (bp->common.int_block == INT_BLOCK_IGU)
+	if (bp->common.int_block == INT_BLOCK_IGU) {
+		/* Disable local BHes to prevent a dead-lock situation between
+		 * sch_direct_xmit() and bnx2x_run_loopback() (calling
+		 * bnx2x_tx_int()), as both are taking netif_tx_lock().
+		 */
+		local_bh_disable();
 		bnx2x_tx_int(fp_tx);
+		local_bh_enable();
+	}
 
 	rx_idx = le16_to_cpu(*fp_rx->rx_cons_sb);
 	if (rx_idx != rx_start_idx + num_pkts)
@@ -1650,7 +1826,7 @@ static int bnx2x_test_intr(struct bnx2x *bp)
 	config->hdr.client_id = bp->fp->cl_id;
 	config->hdr.reserved1 = 0;
 
-	bp->set_mac_pending++;
+	bp->set_mac_pending = 1;
 	smp_wmb();
 	rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_SET_MAC, 0,
 			   U64_HI(bnx2x_sp_mapping(bp, mac_config)),
@@ -1748,134 +1924,6 @@ static void bnx2x_self_test(struct net_device *dev,
 #endif
 }
 
-static const struct {
-	long offset;
-	int size;
-	u8 string[ETH_GSTRING_LEN];
-} bnx2x_q_stats_arr[BNX2X_NUM_Q_STATS] = {
-/* 1 */	{ Q_STATS_OFFSET32(total_bytes_received_hi), 8, "[%d]: rx_bytes" },
-	{ Q_STATS_OFFSET32(error_bytes_received_hi),
-						8, "[%d]: rx_error_bytes" },
-	{ Q_STATS_OFFSET32(total_unicast_packets_received_hi),
-						8, "[%d]: rx_ucast_packets" },
-	{ Q_STATS_OFFSET32(total_multicast_packets_received_hi),
-						8, "[%d]: rx_mcast_packets" },
-	{ Q_STATS_OFFSET32(total_broadcast_packets_received_hi),
-						8, "[%d]: rx_bcast_packets" },
-	{ Q_STATS_OFFSET32(no_buff_discard_hi),	8, "[%d]: rx_discards" },
-	{ Q_STATS_OFFSET32(rx_err_discard_pkt),
-					 4, "[%d]: rx_phy_ip_err_discards"},
-	{ Q_STATS_OFFSET32(rx_skb_alloc_failed),
-					 4, "[%d]: rx_skb_alloc_discard" },
-	{ Q_STATS_OFFSET32(hw_csum_err), 4, "[%d]: rx_csum_offload_errors" },
-
-/* 10 */{ Q_STATS_OFFSET32(total_bytes_transmitted_hi),	8, "[%d]: tx_bytes" },
-	{ Q_STATS_OFFSET32(total_unicast_packets_transmitted_hi),
-						8, "[%d]: tx_ucast_packets" },
-	{ Q_STATS_OFFSET32(total_multicast_packets_transmitted_hi),
-						8, "[%d]: tx_mcast_packets" },
-	{ Q_STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
-						8, "[%d]: tx_bcast_packets" }
-};
-
-static const struct {
-	long offset;
-	int size;
-	u32 flags;
-#define STATS_FLAGS_PORT		1
-#define STATS_FLAGS_FUNC		2
-#define STATS_FLAGS_BOTH		(STATS_FLAGS_FUNC | STATS_FLAGS_PORT)
-	u8 string[ETH_GSTRING_LEN];
-} bnx2x_stats_arr[BNX2X_NUM_STATS] = {
-/* 1 */	{ STATS_OFFSET32(total_bytes_received_hi),
-				8, STATS_FLAGS_BOTH, "rx_bytes" },
-	{ STATS_OFFSET32(error_bytes_received_hi),
-				8, STATS_FLAGS_BOTH, "rx_error_bytes" },
-	{ STATS_OFFSET32(total_unicast_packets_received_hi),
-				8, STATS_FLAGS_BOTH, "rx_ucast_packets" },
-	{ STATS_OFFSET32(total_multicast_packets_received_hi),
-				8, STATS_FLAGS_BOTH, "rx_mcast_packets" },
-	{ STATS_OFFSET32(total_broadcast_packets_received_hi),
-				8, STATS_FLAGS_BOTH, "rx_bcast_packets" },
-	{ STATS_OFFSET32(rx_stat_dot3statsfcserrors_hi),
-				8, STATS_FLAGS_PORT, "rx_crc_errors" },
-	{ STATS_OFFSET32(rx_stat_dot3statsalignmenterrors_hi),
-				8, STATS_FLAGS_PORT, "rx_align_errors" },
-	{ STATS_OFFSET32(rx_stat_etherstatsundersizepkts_hi),
-				8, STATS_FLAGS_PORT, "rx_undersize_packets" },
-	{ STATS_OFFSET32(etherstatsoverrsizepkts_hi),
-				8, STATS_FLAGS_PORT, "rx_oversize_packets" },
-/* 10 */{ STATS_OFFSET32(rx_stat_etherstatsfragments_hi),
-				8, STATS_FLAGS_PORT, "rx_fragments" },
-	{ STATS_OFFSET32(rx_stat_etherstatsjabbers_hi),
-				8, STATS_FLAGS_PORT, "rx_jabbers" },
-	{ STATS_OFFSET32(no_buff_discard_hi),
-				8, STATS_FLAGS_BOTH, "rx_discards" },
-	{ STATS_OFFSET32(mac_filter_discard),
-				4, STATS_FLAGS_PORT, "rx_filtered_packets" },
-	{ STATS_OFFSET32(xxoverflow_discard),
-				4, STATS_FLAGS_PORT, "rx_fw_discards" },
-	{ STATS_OFFSET32(brb_drop_hi),
-				8, STATS_FLAGS_PORT, "rx_brb_discard" },
-	{ STATS_OFFSET32(brb_truncate_hi),
-				8, STATS_FLAGS_PORT, "rx_brb_truncate" },
-	{ STATS_OFFSET32(pause_frames_received_hi),
-				8, STATS_FLAGS_PORT, "rx_pause_frames" },
-	{ STATS_OFFSET32(rx_stat_maccontrolframesreceived_hi),
-				8, STATS_FLAGS_PORT, "rx_mac_ctrl_frames" },
-	{ STATS_OFFSET32(nig_timer_max),
-			4, STATS_FLAGS_PORT, "rx_constant_pause_events" },
-/* 20 */{ STATS_OFFSET32(rx_err_discard_pkt),
-				4, STATS_FLAGS_BOTH, "rx_phy_ip_err_discards"},
-	{ STATS_OFFSET32(rx_skb_alloc_failed),
-				4, STATS_FLAGS_BOTH, "rx_skb_alloc_discard" },
-	{ STATS_OFFSET32(hw_csum_err),
-				4, STATS_FLAGS_BOTH, "rx_csum_offload_errors" },
-
-	{ STATS_OFFSET32(total_bytes_transmitted_hi),
-				8, STATS_FLAGS_BOTH, "tx_bytes" },
-	{ STATS_OFFSET32(tx_stat_ifhcoutbadoctets_hi),
-				8, STATS_FLAGS_PORT, "tx_error_bytes" },
-	{ STATS_OFFSET32(total_unicast_packets_transmitted_hi),
-				8, STATS_FLAGS_BOTH, "tx_ucast_packets" },
-	{ STATS_OFFSET32(total_multicast_packets_transmitted_hi),
-				8, STATS_FLAGS_BOTH, "tx_mcast_packets" },
-	{ STATS_OFFSET32(total_broadcast_packets_transmitted_hi),
-				8, STATS_FLAGS_BOTH, "tx_bcast_packets" },
-	{ STATS_OFFSET32(tx_stat_dot3statsinternalmactransmiterrors_hi),
-				8, STATS_FLAGS_PORT, "tx_mac_errors" },
-	{ STATS_OFFSET32(rx_stat_dot3statscarriersenseerrors_hi),
-				8, STATS_FLAGS_PORT, "tx_carrier_errors" },
-/* 30 */{ STATS_OFFSET32(tx_stat_dot3statssinglecollisionframes_hi),
-				8, STATS_FLAGS_PORT, "tx_single_collisions" },
-	{ STATS_OFFSET32(tx_stat_dot3statsmultiplecollisionframes_hi),
-				8, STATS_FLAGS_PORT, "tx_multi_collisions" },
-	{ STATS_OFFSET32(tx_stat_dot3statsdeferredtransmissions_hi),
-				8, STATS_FLAGS_PORT, "tx_deferred" },
-	{ STATS_OFFSET32(tx_stat_dot3statsexcessivecollisions_hi),
-				8, STATS_FLAGS_PORT, "tx_excess_collisions" },
-	{ STATS_OFFSET32(tx_stat_dot3statslatecollisions_hi),
-				8, STATS_FLAGS_PORT, "tx_late_collisions" },
-	{ STATS_OFFSET32(tx_stat_etherstatscollisions_hi),
-				8, STATS_FLAGS_PORT, "tx_total_collisions" },
-	{ STATS_OFFSET32(tx_stat_etherstatspkts64octets_hi),
-				8, STATS_FLAGS_PORT, "tx_64_byte_packets" },
-	{ STATS_OFFSET32(tx_stat_etherstatspkts65octetsto127octets_hi),
-			8, STATS_FLAGS_PORT, "tx_65_to_127_byte_packets" },
-	{ STATS_OFFSET32(tx_stat_etherstatspkts128octetsto255octets_hi),
-			8, STATS_FLAGS_PORT, "tx_128_to_255_byte_packets" },
-	{ STATS_OFFSET32(tx_stat_etherstatspkts256octetsto511octets_hi),
-			8, STATS_FLAGS_PORT, "tx_256_to_511_byte_packets" },
-/* 40 */{ STATS_OFFSET32(tx_stat_etherstatspkts512octetsto1023octets_hi),
-			8, STATS_FLAGS_PORT, "tx_512_to_1023_byte_packets" },
-	{ STATS_OFFSET32(etherstatspkts1024octetsto1522octets_hi),
-			8, STATS_FLAGS_PORT, "tx_1024_to_1522_byte_packets" },
-	{ STATS_OFFSET32(etherstatspktsover1522octets_hi),
-			8, STATS_FLAGS_PORT, "tx_1523_to_9022_byte_packets" },
-	{ STATS_OFFSET32(pause_frames_sent_hi),
-				8, STATS_FLAGS_PORT, "tx_pause_frames" }
-};
-
 #define IS_PORT_STAT(i) \
 	((bnx2x_stats_arr[i].flags & STATS_FLAGS_BOTH) == STATS_FLAGS_PORT)
 #define IS_FUNC_STAT(i)		(bnx2x_stats_arr[i].flags & STATS_FLAGS_FUNC)
@@ -1890,7 +1938,8 @@ static int bnx2x_get_sset_count(struct net_device *dev, int stringset)
 	switch (stringset) {
 	case ETH_SS_STATS:
 		if (is_multi(bp)) {
-			num_stats = BNX2X_NUM_Q_STATS * bp->num_queues;
+			num_stats = BNX2X_NUM_STAT_QUEUES(bp) *
+				BNX2X_NUM_Q_STATS;
 			if (!IS_MF_MODE_STAT(bp))
 				num_stats += BNX2X_NUM_STATS;
 		} else {
@@ -1916,15 +1965,25 @@ static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 {
 	struct bnx2x *bp = netdev_priv(dev);
 	int i, j, k;
+	char queue_name[MAX_QUEUE_NAME_LEN+1];
 
 	switch (stringset) {
 	case ETH_SS_STATS:
 		if (is_multi(bp)) {
 			k = 0;
-			for_each_queue(bp, i) {
+			for_each_napi_queue(bp, i) {
+				memset(queue_name, 0, sizeof(queue_name));
+
+				if (IS_FCOE_IDX(i))
+					sprintf(queue_name, "fcoe");
+				else
+					sprintf(queue_name, "%d", i);
+
 				for (j = 0; j < BNX2X_NUM_Q_STATS; j++)
-					sprintf(buf + (k + j)*ETH_GSTRING_LEN,
-						bnx2x_q_stats_arr[j].string, i);
+					snprintf(buf + (k + j)*ETH_GSTRING_LEN,
+						ETH_GSTRING_LEN,
+						bnx2x_q_stats_arr[j].string,
+						queue_name);
 				k += BNX2X_NUM_Q_STATS;
 			}
 			if (IS_MF_MODE_STAT(bp))
@@ -1958,7 +2017,7 @@ static void bnx2x_get_ethtool_stats(struct net_device *dev,
 
 	if (is_multi(bp)) {
 		k = 0;
-		for_each_queue(bp, i) {
+		for_each_napi_queue(bp, i) {
 			hw_stats = (u32 *)&bp->fp[i].eth_q_stats;
 			for (j = 0; j < BNX2X_NUM_Q_STATS; j++) {
 				if (bnx2x_q_stats_arr[j].size == 0) {
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index 4cfd4e9b558..6238d4f6398 100644
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -434,7 +434,12 @@ struct shared_feat_cfg {				 /* NVRAM Offset */
 #define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_DISABLED     0x00000000
 #define SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED      0x00000002
 
-#define SHARED_FEATURE_MF_MODE_DISABLED 	    0x00000100
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_MASK		      0x00000700
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_SHIFT		      8
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED	      0x00000000
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_FORCED_SF		      0x00000100
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_SPIO4		      0x00000200
+#define SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT	      0x00000300
 
 };
 
@@ -679,7 +684,7 @@ struct shm_dev_info {						    /* size */
 #define E1VN_MAX			1
 #define E1HVN_MAX			4
 
-
+#define E2_VF_MAX			64
 /* This value (in milliseconds) determines the frequency of the driver
  * issuing the PULSE message code.  The firmware monitors this periodic
  * pulse to determine when to switch to an OS-absent mode. */
@@ -815,6 +820,11 @@ struct drv_func_mb {
 #define DRV_MSG_CODE_VRFY_SPECIFIC_PHY_OPT_MDL	    0xa1000000
 #define REQ_BC_VER_4_VRFY_SPECIFIC_PHY_OPT_MDL	    0x00050234
 
+#define DRV_MSG_CODE_DCBX_ADMIN_PMF_MSG			0xb0000000
+#define DRV_MSG_CODE_DCBX_PMF_DRV_OK			0xb2000000
+#define DRV_MSG_CODE_SET_MF_BW				0xe0000000
+#define REQ_BC_VER_4_SET_MF_BW				0x00060202
+#define DRV_MSG_CODE_SET_MF_BW_ACK			0xe1000000
 #define BIOS_MSG_CODE_LIC_CHALLENGE			0xff010000
 #define BIOS_MSG_CODE_LIC_RESPONSE			0xff020000
 #define BIOS_MSG_CODE_VIRT_MAC_PRIM			0xff030000
@@ -888,6 +898,7 @@ struct drv_func_mb {
 
 	u32 drv_status;
 #define DRV_STATUS_PMF					0x00000001
+#define DRV_STATUS_SET_MF_BW				0x00000004
 
 #define DRV_STATUS_DCC_EVENT_MASK			0x0000ff00
 #define DRV_STATUS_DCC_DISABLE_ENABLE_PF		0x00000100
@@ -896,6 +907,8 @@ struct drv_func_mb {
 #define DRV_STATUS_DCC_RESERVED1			0x00000800
 #define DRV_STATUS_DCC_SET_PROTOCOL			0x00001000
 #define DRV_STATUS_DCC_SET_PRIORITY			0x00002000
+#define DRV_STATUS_DCBX_EVENT_MASK			0x000f0000
+#define DRV_STATUS_DCBX_NEGOTIATION_RESULTS		0x00010000
 
 	u32 virt_mac_upper;
 #define VIRT_MAC_SIGN_MASK				0xffff0000
@@ -988,12 +1001,43 @@ struct func_mf_cfg {
 
 };
 
+/* This structure is not applicable and should not be accessed on 57711 */
+struct func_ext_cfg {
+	u32 func_cfg;
+#define MACP_FUNC_CFG_FLAGS_MASK			      0x000000FF
+#define MACP_FUNC_CFG_FLAGS_SHIFT			      0
+#define MACP_FUNC_CFG_FLAGS_ENABLED			      0x00000001
+#define MACP_FUNC_CFG_FLAGS_ETHERNET			      0x00000002
+#define MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD		      0x00000004
+#define MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD		      0x00000008
+
+	u32 iscsi_mac_addr_upper;
+	u32 iscsi_mac_addr_lower;
+
+	u32 fcoe_mac_addr_upper;
+	u32 fcoe_mac_addr_lower;
+
+	u32 fcoe_wwn_port_name_upper;
+	u32 fcoe_wwn_port_name_lower;
+
+	u32 fcoe_wwn_node_name_upper;
+	u32 fcoe_wwn_node_name_lower;
+
+	u32 preserve_data;
+#define MF_FUNC_CFG_PRESERVE_L2_MAC			     (1<<0)
+#define MF_FUNC_CFG_PRESERVE_ISCSI_MAC			     (1<<1)
+#define MF_FUNC_CFG_PRESERVE_FCOE_MAC			     (1<<2)
+#define MF_FUNC_CFG_PRESERVE_FCOE_WWN_P			     (1<<3)
+#define MF_FUNC_CFG_PRESERVE_FCOE_WWN_N			     (1<<4)
+};
+
 struct mf_cfg {
 
 	struct shared_mf_cfg	shared_mf_config;
 	struct port_mf_cfg	port_mf_config[PORT_MAX];
 	struct func_mf_cfg	func_mf_config[E1H_FUNC_MAX];
 
+	struct func_ext_cfg func_ext_config[E1H_FUNC_MAX];
 };
 
 
@@ -1049,6 +1093,251 @@ struct fw_flr_mb {
 	struct	fw_flr_ack ack;
 };
 
+/**** SUPPORT FOR SHMEM ARRRAYS ***
+ * The SHMEM HSI is aligned on 32 bit boundaries which makes it difficult to
+ * define arrays with storage types smaller then unsigned dwords.
+ * The macros below add generic support for SHMEM arrays with numeric elements
+ * that can span 2,4,8 or 16 bits. The array underlying type is a 32 bit dword
+ * array with individual bit-filed elements accessed using shifts and masks.
+ *
+ */
+
+/* eb is the bitwidth of a single element */
+#define SHMEM_ARRAY_MASK(eb)		((1<<(eb))-1)
+#define SHMEM_ARRAY_ENTRY(i, eb)	((i)/(32/(eb)))
+
+/* the bit-position macro allows the used to flip the order of the arrays
+ * elements on a per byte or word boundary.
+ *
+ * example: an array with 8 entries each 4 bit wide. This array will fit into
+ * a single dword. The diagrmas below show the array order of the nibbles.
+ *
+ * SHMEM_ARRAY_BITPOS(i, 4, 4) defines the stadard ordering:
+ *
+ *		|		|		|		|
+ *   0	|   1	|   2	|   3	|   4	|   5	|   6	|   7	|
+ *		|		|		|		|
+ *
+ * SHMEM_ARRAY_BITPOS(i, 4, 8) defines a flip ordering per byte:
+ *
+ *		|		|		|		|
+ *   1	|   0	|   3	|   2	|   5	|   4	|   7	|   6	|
+ *		|		|		|		|
+ *
+ * SHMEM_ARRAY_BITPOS(i, 4, 16) defines a flip ordering per word:
+ *
+ *		|		|		|		|
+ *   3	|   2	|   1	|   0	|   7	|   6	|   5	|   4	|
+ *		|		|		|		|
+ */
+#define SHMEM_ARRAY_BITPOS(i, eb, fb)	\
+	((((32/(fb)) - 1 - ((i)/((fb)/(eb))) % (32/(fb))) * (fb)) + \
+	(((i)%((fb)/(eb))) * (eb)))
+
+#define SHMEM_ARRAY_GET(a, i, eb, fb)					   \
+	((a[SHMEM_ARRAY_ENTRY(i, eb)] >> SHMEM_ARRAY_BITPOS(i, eb, fb)) &  \
+	SHMEM_ARRAY_MASK(eb))
+
+#define SHMEM_ARRAY_SET(a, i, eb, fb, val)				   \
+do {									   \
+	a[SHMEM_ARRAY_ENTRY(i, eb)] &= ~(SHMEM_ARRAY_MASK(eb) <<	   \
+	SHMEM_ARRAY_BITPOS(i, eb, fb));				   \
+	a[SHMEM_ARRAY_ENTRY(i, eb)] |= (((val) & SHMEM_ARRAY_MASK(eb)) <<  \
+	SHMEM_ARRAY_BITPOS(i, eb, fb));				   \
+} while (0)
+
+
+/****START OF DCBX STRUCTURES DECLARATIONS****/
+#define DCBX_MAX_NUM_PRI_PG_ENTRIES	8
+#define DCBX_PRI_PG_BITWIDTH		4
+#define DCBX_PRI_PG_FBITS		8
+#define DCBX_PRI_PG_GET(a, i)		\
+	SHMEM_ARRAY_GET(a, i, DCBX_PRI_PG_BITWIDTH, DCBX_PRI_PG_FBITS)
+#define DCBX_PRI_PG_SET(a, i, val)	\
+	SHMEM_ARRAY_SET(a, i, DCBX_PRI_PG_BITWIDTH, DCBX_PRI_PG_FBITS, val)
+#define DCBX_MAX_NUM_PG_BW_ENTRIES	8
+#define DCBX_BW_PG_BITWIDTH		8
+#define DCBX_PG_BW_GET(a, i)		\
+	SHMEM_ARRAY_GET(a, i, DCBX_BW_PG_BITWIDTH, DCBX_BW_PG_BITWIDTH)
+#define DCBX_PG_BW_SET(a, i, val)	\
+	SHMEM_ARRAY_SET(a, i, DCBX_BW_PG_BITWIDTH, DCBX_BW_PG_BITWIDTH, val)
+#define DCBX_STRICT_PRI_PG		15
+#define DCBX_MAX_APP_PROTOCOL		16
+#define FCOE_APP_IDX			0
+#define ISCSI_APP_IDX			1
+#define PREDEFINED_APP_IDX_MAX		2
+
+struct dcbx_ets_feature {
+	u32 enabled;
+	u32  pg_bw_tbl[2];
+	u32  pri_pg_tbl[1];
+};
+
+struct dcbx_pfc_feature {
+#ifdef __BIG_ENDIAN
+	u8 pri_en_bitmap;
+#define DCBX_PFC_PRI_0 0x01
+#define DCBX_PFC_PRI_1 0x02
+#define DCBX_PFC_PRI_2 0x04
+#define DCBX_PFC_PRI_3 0x08
+#define DCBX_PFC_PRI_4 0x10
+#define DCBX_PFC_PRI_5 0x20
+#define DCBX_PFC_PRI_6 0x40
+#define DCBX_PFC_PRI_7 0x80
+	u8 pfc_caps;
+	u8 reserved;
+	u8 enabled;
+#elif defined(__LITTLE_ENDIAN)
+	u8 enabled;
+	u8 reserved;
+	u8 pfc_caps;
+	u8 pri_en_bitmap;
+#define DCBX_PFC_PRI_0 0x01
+#define DCBX_PFC_PRI_1 0x02
+#define DCBX_PFC_PRI_2 0x04
+#define DCBX_PFC_PRI_3 0x08
+#define DCBX_PFC_PRI_4 0x10
+#define DCBX_PFC_PRI_5 0x20
+#define DCBX_PFC_PRI_6 0x40
+#define DCBX_PFC_PRI_7 0x80
+#endif
+};
+
+struct dcbx_app_priority_entry {
+#ifdef __BIG_ENDIAN
+	u16	app_id;
+	u8	pri_bitmap;
+	u8	appBitfield;
+#define DCBX_APP_ENTRY_VALID	     0x01
+#define DCBX_APP_ENTRY_SF_MASK	     0x30
+#define DCBX_APP_ENTRY_SF_SHIFT	     4
+#define DCBX_APP_SF_ETH_TYPE	     0x10
+#define DCBX_APP_SF_PORT	     0x20
+#elif defined(__LITTLE_ENDIAN)
+	u8 appBitfield;
+#define DCBX_APP_ENTRY_VALID	     0x01
+#define DCBX_APP_ENTRY_SF_MASK	     0x30
+#define DCBX_APP_ENTRY_SF_SHIFT	     4
+#define DCBX_APP_SF_ETH_TYPE	     0x10
+#define DCBX_APP_SF_PORT	     0x20
+	u8	pri_bitmap;
+	u16	app_id;
+#endif
+};
+
+struct dcbx_app_priority_feature {
+#ifdef __BIG_ENDIAN
+	u8 reserved;
+	u8 default_pri;
+	u8 tc_supported;
+	u8 enabled;
+#elif defined(__LITTLE_ENDIAN)
+	u8 enabled;
+	u8 tc_supported;
+	u8 default_pri;
+	u8 reserved;
+#endif
+	struct dcbx_app_priority_entry  app_pri_tbl[DCBX_MAX_APP_PROTOCOL];
+};
+
+struct dcbx_features {
+	struct dcbx_ets_feature ets;
+	struct dcbx_pfc_feature pfc;
+	struct dcbx_app_priority_feature app;
+};
+
+struct lldp_params {
+#ifdef __BIG_ENDIAN
+	u8	msg_fast_tx_interval;
+	u8	msg_tx_hold;
+	u8	msg_tx_interval;
+	u8	admin_status;
+#define LLDP_TX_ONLY  0x01
+#define LLDP_RX_ONLY  0x02
+#define LLDP_TX_RX    0x03
+#define LLDP_DISABLED 0x04
+	u8	reserved1;
+	u8	tx_fast;
+	u8	tx_crd_max;
+	u8	tx_crd;
+#elif defined(__LITTLE_ENDIAN)
+	u8	admin_status;
+#define LLDP_TX_ONLY  0x01
+#define LLDP_RX_ONLY  0x02
+#define LLDP_TX_RX    0x03
+#define LLDP_DISABLED 0x04
+	u8	msg_tx_interval;
+	u8	msg_tx_hold;
+	u8	msg_fast_tx_interval;
+	u8	tx_crd;
+	u8	tx_crd_max;
+	u8	tx_fast;
+	u8	reserved1;
+#endif
+#define REM_CHASSIS_ID_STAT_LEN	4
+#define REM_PORT_ID_STAT_LEN 4
+	u32 peer_chassis_id[REM_CHASSIS_ID_STAT_LEN];
+	u32 peer_port_id[REM_PORT_ID_STAT_LEN];
+};
+
+struct lldp_dcbx_stat {
+#define LOCAL_CHASSIS_ID_STAT_LEN 2
+#define LOCAL_PORT_ID_STAT_LEN 2
+	u32 local_chassis_id[LOCAL_CHASSIS_ID_STAT_LEN];
+	u32 local_port_id[LOCAL_PORT_ID_STAT_LEN];
+	u32 num_tx_dcbx_pkts;
+	u32 num_rx_dcbx_pkts;
+};
+
+struct lldp_admin_mib {
+	u32	ver_cfg_flags;
+#define DCBX_ETS_CONFIG_TX_ENABLED	0x00000001
+#define DCBX_PFC_CONFIG_TX_ENABLED	0x00000002
+#define DCBX_APP_CONFIG_TX_ENABLED	0x00000004
+#define DCBX_ETS_RECO_TX_ENABLED	0x00000008
+#define DCBX_ETS_RECO_VALID		0x00000010
+#define DCBX_ETS_WILLING		0x00000020
+#define DCBX_PFC_WILLING		0x00000040
+#define DCBX_APP_WILLING		0x00000080
+#define DCBX_VERSION_CEE		0x00000100
+#define DCBX_VERSION_IEEE		0x00000200
+#define DCBX_DCBX_ENABLED		0x00000400
+#define DCBX_CEE_VERSION_MASK		0x0000f000
+#define DCBX_CEE_VERSION_SHIFT		12
+#define DCBX_CEE_MAX_VERSION_MASK	0x000f0000
+#define DCBX_CEE_MAX_VERSION_SHIFT	16
+	struct dcbx_features	features;
+};
+
+struct lldp_remote_mib {
+	u32 prefix_seq_num;
+	u32 flags;
+#define DCBX_ETS_TLV_RX	    0x00000001
+#define DCBX_PFC_TLV_RX	    0x00000002
+#define DCBX_APP_TLV_RX	    0x00000004
+#define DCBX_ETS_RX_ERROR   0x00000010
+#define DCBX_PFC_RX_ERROR   0x00000020
+#define DCBX_APP_RX_ERROR   0x00000040
+#define DCBX_ETS_REM_WILLING	0x00000100
+#define DCBX_PFC_REM_WILLING	0x00000200
+#define DCBX_APP_REM_WILLING	0x00000400
+#define DCBX_REMOTE_ETS_RECO_VALID  0x00001000
+	struct dcbx_features features;
+	u32 suffix_seq_num;
+};
+
+struct lldp_local_mib {
+	u32 prefix_seq_num;
+	u32 error;
+#define DCBX_LOCAL_ETS_ERROR	 0x00000001
+#define DCBX_LOCAL_PFC_ERROR	 0x00000002
+#define DCBX_LOCAL_APP_ERROR	 0x00000004
+#define DCBX_LOCAL_PFC_MISMATCH	 0x00000010
+#define DCBX_LOCAL_APP_MISMATCH	 0x00000020
+	struct dcbx_features   features;
+	u32 suffix_seq_num;
+};
+/***END OF DCBX STRUCTURES DECLARATIONS***/
 
 struct shmem2_region {
 
@@ -1072,7 +1361,12 @@ struct shmem2_region {
 #define SHMEM_MF_CFG_ADDR_NONE			    0x00000000
 
 	struct fw_flr_mb flr_mb;
-	u32	reserved[3];
+	u32	dcbx_lldp_params_offset;
+#define SHMEM_LLDP_DCBX_PARAMS_NONE		    0x00000000
+	u32	dcbx_neg_res_offset;
+#define SHMEM_DCBX_NEG_RES_NONE			    0x00000000
+	u32	dcbx_remote_mib_offset;
+#define SHMEM_DCBX_REMOTE_MIB_NONE		    0x00000000
 	/*
 	 * The other shmemX_base_addr holds the other path's shmem address
 	 * required for example in case of common phy init, or for path1 to know
@@ -1081,6 +1375,10 @@ struct shmem2_region {
 	 */
 	u32 other_shmem_base_addr;
 	u32 other_shmem2_base_addr;
+	u32	reserved1[E2_VF_MAX / 32];
+	u32	reserved2[E2_FUNC_MAX][E2_VF_MAX / 32];
+	u32	dcbx_lldp_dcbx_stat_offset;
+#define SHMEM_LLDP_DCBX_STAT_NONE		   0x00000000
 };
 
 
@@ -1534,8 +1832,8 @@ struct host_func_stats {
 
 
 #define BCM_5710_FW_MAJOR_VERSION			6
-#define BCM_5710_FW_MINOR_VERSION			0
-#define BCM_5710_FW_REVISION_VERSION			34
+#define BCM_5710_FW_MINOR_VERSION			2
+#define BCM_5710_FW_REVISION_VERSION			5
 #define BCM_5710_FW_ENGINEERING_VERSION			0
 #define BCM_5710_FW_COMPILE_FLAGS			1
 
@@ -2983,6 +3281,25 @@ struct fairness_vars_per_vn {
 
 
 /*
+ * The data for flow control configuration
+ */
+struct flow_control_configuration {
+	struct priority_cos
+		traffic_type_to_priority_cos[MAX_PFC_TRAFFIC_TYPES];
+#if defined(__BIG_ENDIAN)
+	u16 reserved1;
+	u8 dcb_version;
+	u8 dcb_enabled;
+#elif defined(__LITTLE_ENDIAN)
+	u8 dcb_enabled;
+	u8 dcb_version;
+	u16 reserved1;
+#endif
+	u32 reserved2;
+};
+
+
+/*
  * FW version stored in the Xstorm RAM
  */
 struct fw_version {
diff --git a/drivers/net/bnx2x/bnx2x_init_ops.h b/drivers/net/bnx2x/bnx2x_init_ops.h
index a306b0e46b6..66df29fcf75 100644
--- a/drivers/net/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/bnx2x/bnx2x_init_ops.h
@@ -838,7 +838,7 @@ static void bnx2x_qm_init_ptr_table(struct bnx2x *bp, int qm_cid_count,
 /****************************************************************************
 * SRC initializations
 ****************************************************************************/
-
+#ifdef BCM_CNIC
 /* called during init func stage */
 static void bnx2x_src_init_t2(struct bnx2x *bp, struct src_ent *t2,
 			      dma_addr_t t2_mapping, int src_cid_count)
@@ -862,5 +862,5 @@ static void bnx2x_src_init_t2(struct bnx2x *bp, struct src_ent *t2,
 		    U64_HI((u64)t2_mapping +
 			   (src_cid_count-1) * sizeof(struct src_ent)));
 }
-
+#endif
 #endif /* BNX2X_INIT_OPS_H */
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 58091961925..43b0de24f39 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -164,7 +164,8 @@
 #define EDC_MODE_PASSIVE_DAC 			0x0055
 
 
-
+#define ETS_BW_LIMIT_CREDIT_UPPER_BOUND		(0x5000)
+#define ETS_BW_LIMIT_CREDIT_WEIGHT		(0x5000)
 /**********************************************************/
 /*                     INTERFACE                          */
 /**********************************************************/
@@ -205,6 +206,270 @@ static u32 bnx2x_bits_dis(struct bnx2x *bp, u32 reg, u32 bits)
 	return val;
 }
 
+/******************************************************************/
+/*				ETS section			  */
+/******************************************************************/
+void bnx2x_ets_disabled(struct link_params *params)
+{
+	/* ETS disabled configuration*/
+	struct bnx2x *bp = params->bp;
+
+	DP(NETIF_MSG_LINK, "ETS disabled configuration\n");
+
+	/**
+	 * mapping between entry  priority to client number (0,1,2 -debug and
+	 * management clients, 3 - COS0 client, 4 - COS client)(HIGHEST)
+	 * 3bits client num.
+	 *   PRI4    |    PRI3    |    PRI2    |    PRI1    |    PRI0
+	 * cos1-100     cos0-011     dbg1-010     dbg0-001     MCP-000
+	 */
+
+	REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT, 0x4688);
+	/**
+	 * Bitmap of 5bits length. Each bit specifies whether the entry behaves
+	 * as strict.  Bits 0,1,2 - debug and management entries, 3 -
+	 * COS0 entry, 4 - COS1 entry.
+	 * COS1 | COS0 | DEBUG1 | DEBUG0 | MGMT
+	 * bit4   bit3	  bit2   bit1	  bit0
+	 * MCP and debug are strict
+	 */
+
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x7);
+	/* defines which entries (clients) are subjected to WFQ arbitration */
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0);
+	/**
+	* For strict priority entries defines the number of consecutive
+	* slots for the highest priority.
+	*/
+	REG_WR(bp, NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100);
+	/**
+	 * mapping between the CREDIT_WEIGHT registers and actual client
+	 * numbers
+	 */
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP, 0);
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, 0);
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, 0);
+
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0, 0);
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1, 0);
+	REG_WR(bp, PBF_REG_HIGH_PRIORITY_COS_NUM, 0);
+	/* ETS mode disable */
+	REG_WR(bp, PBF_REG_ETS_ENABLED, 0);
+	/**
+	 * If ETS mode is enabled (there is no strict priority) defines a WFQ
+	 * weight for COS0/COS1.
+	 */
+	REG_WR(bp, PBF_REG_COS0_WEIGHT, 0x2710);
+	REG_WR(bp, PBF_REG_COS1_WEIGHT, 0x2710);
+	/* Upper bound that COS0_WEIGHT can reach in the WFQ arbiter */
+	REG_WR(bp, PBF_REG_COS0_UPPER_BOUND, 0x989680);
+	REG_WR(bp, PBF_REG_COS1_UPPER_BOUND, 0x989680);
+	/* Defines the number of consecutive slots for the strict priority */
+	REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0);
+}
+
+void bnx2x_ets_bw_limit_common(const struct link_params *params)
+{
+	/* ETS disabled configuration */
+	struct bnx2x *bp = params->bp;
+	DP(NETIF_MSG_LINK, "ETS enabled BW limit configuration\n");
+	/**
+	* defines which entries (clients) are subjected to WFQ arbitration
+	* COS0 0x8
+	* COS1 0x10
+	*/
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ, 0x18);
+	/**
+	* mapping between the ARB_CREDIT_WEIGHT registers and actual
+	* client numbers (WEIGHT_0 does not actually have to represent
+	* client 0)
+	*    PRI4    |    PRI3    |    PRI2    |    PRI1    |    PRI0
+	*  cos1-001     cos0-000     dbg1-100     dbg0-011     MCP-010
+	*/
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP, 0x111A);
+
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0,
+	       ETS_BW_LIMIT_CREDIT_UPPER_BOUND);
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1,
+	       ETS_BW_LIMIT_CREDIT_UPPER_BOUND);
+
+	/* ETS mode enabled*/
+	REG_WR(bp, PBF_REG_ETS_ENABLED, 1);
+
+	/* Defines the number of consecutive slots for the strict priority */
+	REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0);
+	/**
+	* Bitmap of 5bits length. Each bit specifies whether the entry behaves
+	* as strict.  Bits 0,1,2 - debug and management entries, 3 - COS0
+	* entry, 4 - COS1 entry.
+	* COS1 | COS0 | DEBUG21 | DEBUG0 | MGMT
+	* bit4   bit3	  bit2     bit1	   bit0
+	* MCP and debug are strict
+	*/
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x7);
+
+	/* Upper bound that COS0_WEIGHT can reach in the WFQ arbiter.*/
+	REG_WR(bp, PBF_REG_COS0_UPPER_BOUND,
+	       ETS_BW_LIMIT_CREDIT_UPPER_BOUND);
+	REG_WR(bp, PBF_REG_COS1_UPPER_BOUND,
+	       ETS_BW_LIMIT_CREDIT_UPPER_BOUND);
+}
+
+void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw,
+			const u32 cos1_bw)
+{
+	/* ETS disabled configuration*/
+	struct bnx2x *bp = params->bp;
+	const u32 total_bw = cos0_bw + cos1_bw;
+	u32 cos0_credit_weight = 0;
+	u32 cos1_credit_weight = 0;
+
+	DP(NETIF_MSG_LINK, "ETS enabled BW limit configuration\n");
+
+	if ((0 == total_bw) ||
+	    (0 == cos0_bw) ||
+	    (0 == cos1_bw)) {
+		DP(NETIF_MSG_LINK,
+		   "bnx2x_ets_bw_limit: Total BW can't be zero\n");
+		return;
+	}
+
+	cos0_credit_weight = (cos0_bw * ETS_BW_LIMIT_CREDIT_WEIGHT)/
+		total_bw;
+	cos1_credit_weight = (cos1_bw * ETS_BW_LIMIT_CREDIT_WEIGHT)/
+		total_bw;
+
+	bnx2x_ets_bw_limit_common(params);
+
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0, cos0_credit_weight);
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1, cos1_credit_weight);
+
+	REG_WR(bp, PBF_REG_COS0_WEIGHT, cos0_credit_weight);
+	REG_WR(bp, PBF_REG_COS1_WEIGHT, cos1_credit_weight);
+}
+
+u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos)
+{
+	/* ETS disabled configuration*/
+	struct bnx2x *bp = params->bp;
+	u32 val	= 0;
+
+	DP(NETIF_MSG_LINK, "ETS enabled strict configuration\n");
+	/**
+	 * Bitmap of 5bits length. Each bit specifies whether the entry behaves
+	 * as strict.  Bits 0,1,2 - debug and management entries,
+	 * 3 - COS0 entry, 4 - COS1 entry.
+	 *  COS1 | COS0 | DEBUG21 | DEBUG0 | MGMT
+	 *  bit4   bit3	  bit2      bit1     bit0
+	 * MCP and debug are strict
+	 */
+	REG_WR(bp, NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT, 0x1F);
+	/**
+	 * For strict priority entries defines the number of consecutive slots
+	 * for the highest priority.
+	 */
+	REG_WR(bp, NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS, 0x100);
+	/* ETS mode disable */
+	REG_WR(bp, PBF_REG_ETS_ENABLED, 0);
+	/* Defines the number of consecutive slots for the strict priority */
+	REG_WR(bp, PBF_REG_NUM_STRICT_ARB_SLOTS, 0x100);
+
+	/* Defines the number of consecutive slots for the strict priority */
+	REG_WR(bp, PBF_REG_HIGH_PRIORITY_COS_NUM, strict_cos);
+
+	/**
+	* mapping between entry  priority to client number (0,1,2 -debug and
+	* management clients, 3 - COS0 client, 4 - COS client)(HIGHEST)
+	* 3bits client num.
+	*   PRI4    |    PRI3    |    PRI2    |    PRI1    |    PRI0
+	* dbg0-010     dbg1-001     cos1-100     cos0-011     MCP-000
+	* dbg0-010     dbg1-001     cos0-011     cos1-100     MCP-000
+	*/
+	val = (0 == strict_cos) ? 0x2318 : 0x22E0;
+	REG_WR(bp, NIG_REG_P0_TX_ARB_PRIORITY_CLIENT, val);
+
+	return 0;
+}
+/******************************************************************/
+/*			ETS section				  */
+/******************************************************************/
+
+static void bnx2x_bmac2_get_pfc_stat(struct link_params *params,
+				     u32 pfc_frames_sent[2],
+				     u32 pfc_frames_received[2])
+{
+	/* Read pfc statistic */
+	struct bnx2x *bp = params->bp;
+	u32 bmac_addr = params->port ? NIG_REG_INGRESS_BMAC1_MEM :
+		NIG_REG_INGRESS_BMAC0_MEM;
+
+	DP(NETIF_MSG_LINK, "pfc statistic read from BMAC\n");
+
+	REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_STAT_GTPP,
+					pfc_frames_sent, 2);
+
+	REG_RD_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_RX_STAT_GRPP,
+					pfc_frames_received, 2);
+
+}
+static void bnx2x_emac_get_pfc_stat(struct link_params *params,
+				    u32 pfc_frames_sent[2],
+				    u32 pfc_frames_received[2])
+{
+	/* Read pfc statistic */
+	struct bnx2x *bp = params->bp;
+	u32 emac_base = params->port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+	u32 val_xon = 0;
+	u32 val_xoff = 0;
+
+	DP(NETIF_MSG_LINK, "pfc statistic read from EMAC\n");
+
+	/* PFC received frames */
+	val_xoff = REG_RD(bp, emac_base +
+				EMAC_REG_RX_PFC_STATS_XOFF_RCVD);
+	val_xoff &= EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT;
+	val_xon = REG_RD(bp, emac_base + EMAC_REG_RX_PFC_STATS_XON_RCVD);
+	val_xon &= EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT;
+
+	pfc_frames_received[0] = val_xon + val_xoff;
+
+	/* PFC received sent */
+	val_xoff = REG_RD(bp, emac_base +
+				EMAC_REG_RX_PFC_STATS_XOFF_SENT);
+	val_xoff &= EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT;
+	val_xon = REG_RD(bp, emac_base + EMAC_REG_RX_PFC_STATS_XON_SENT);
+	val_xon &= EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT;
+
+	pfc_frames_sent[0] = val_xon + val_xoff;
+}
+
+void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars,
+			 u32 pfc_frames_sent[2],
+			 u32 pfc_frames_received[2])
+{
+	/* Read pfc statistic */
+	struct bnx2x *bp = params->bp;
+	u32 val	= 0;
+	DP(NETIF_MSG_LINK, "pfc statistic\n");
+
+	if (!vars->link_up)
+		return;
+
+	val = REG_RD(bp, MISC_REG_RESET_REG_2);
+	if ((val & (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))
+	    == 0) {
+		DP(NETIF_MSG_LINK, "About to read stats from EMAC\n");
+		bnx2x_emac_get_pfc_stat(params, pfc_frames_sent,
+					pfc_frames_received);
+	} else {
+		DP(NETIF_MSG_LINK, "About to read stats from BMAC\n");
+		bnx2x_bmac2_get_pfc_stat(params, pfc_frames_sent,
+					 pfc_frames_received);
+	}
+}
+/******************************************************************/
+/*			MAC/PBF section				  */
+/******************************************************************/
 static void bnx2x_emac_init(struct link_params *params,
 			   struct link_vars *vars)
 {
@@ -315,24 +580,55 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 		/* pause enable/disable */
 		bnx2x_bits_dis(bp, emac_base + EMAC_REG_EMAC_RX_MODE,
 			       EMAC_RX_MODE_FLOW_EN);
-		if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
-			bnx2x_bits_en(bp, emac_base +
-				    EMAC_REG_EMAC_RX_MODE,
-				    EMAC_RX_MODE_FLOW_EN);
 
 		bnx2x_bits_dis(bp,  emac_base + EMAC_REG_EMAC_TX_MODE,
-			     (EMAC_TX_MODE_EXT_PAUSE_EN |
-			      EMAC_TX_MODE_FLOW_EN));
-		if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
-			bnx2x_bits_en(bp, emac_base +
-				    EMAC_REG_EMAC_TX_MODE,
-				   (EMAC_TX_MODE_EXT_PAUSE_EN |
-				    EMAC_TX_MODE_FLOW_EN));
+			       (EMAC_TX_MODE_EXT_PAUSE_EN |
+				EMAC_TX_MODE_FLOW_EN));
+		if (!(params->feature_config_flags &
+		      FEATURE_CONFIG_PFC_ENABLED)) {
+			if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
+				bnx2x_bits_en(bp, emac_base +
+					      EMAC_REG_EMAC_RX_MODE,
+					      EMAC_RX_MODE_FLOW_EN);
+
+			if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+				bnx2x_bits_en(bp, emac_base +
+					      EMAC_REG_EMAC_TX_MODE,
+					      (EMAC_TX_MODE_EXT_PAUSE_EN |
+					       EMAC_TX_MODE_FLOW_EN));
+		} else
+			bnx2x_bits_en(bp, emac_base + EMAC_REG_EMAC_TX_MODE,
+				      EMAC_TX_MODE_FLOW_EN);
 	}
 
 	/* KEEP_VLAN_TAG, promiscuous */
 	val = REG_RD(bp, emac_base + EMAC_REG_EMAC_RX_MODE);
 	val |= EMAC_RX_MODE_KEEP_VLAN_TAG | EMAC_RX_MODE_PROMISCUOUS;
+
+	/**
+	* Setting this bit causes MAC control frames (except for pause
+	* frames) to be passed on for processing. This setting has no
+	* affect on the operation of the pause frames. This bit effects
+	* all packets regardless of RX Parser packet sorting logic.
+	* Turn the PFC off to make sure we are in Xon state before
+	* enabling it.
+	*/
+	EMAC_WR(bp, EMAC_REG_RX_PFC_MODE, 0);
+	if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) {
+		DP(NETIF_MSG_LINK, "PFC is enabled\n");
+		/* Enable PFC again */
+		EMAC_WR(bp, EMAC_REG_RX_PFC_MODE,
+			EMAC_REG_RX_PFC_MODE_RX_EN |
+			EMAC_REG_RX_PFC_MODE_TX_EN |
+			EMAC_REG_RX_PFC_MODE_PRIORITIES);
+
+		EMAC_WR(bp, EMAC_REG_RX_PFC_PARAM,
+			((0x0101 <<
+			  EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT) |
+			 (0x00ff <<
+			  EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT)));
+		val |= EMAC_RX_MODE_KEEP_MAC_CONTROL;
+	}
 	EMAC_WR(bp, EMAC_REG_EMAC_RX_MODE, val);
 
 	/* Set Loopback */
@@ -362,7 +658,9 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 	/* enable the NIG in/out to the emac */
 	REG_WR(bp, NIG_REG_EMAC0_IN_EN + port*4, 0x1);
 	val = 0;
-	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+	if ((params->feature_config_flags &
+	      FEATURE_CONFIG_PFC_ENABLED) ||
+	    (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
 		val = 1;
 
 	REG_WR(bp, NIG_REG_EMAC0_PAUSE_OUT_EN + port*4, val);
@@ -383,9 +681,38 @@ static u8 bnx2x_emac_enable(struct link_params *params,
 	return 0;
 }
 
-static void bnx2x_update_bmac2(struct link_params *params,
-			       struct link_vars *vars,
-			       u8 is_lb)
+static void bnx2x_update_pfc_bmac1(struct link_params *params,
+				   struct link_vars *vars)
+{
+	u32 wb_data[2];
+	struct bnx2x *bp = params->bp;
+	u32 bmac_addr =  params->port ? NIG_REG_INGRESS_BMAC1_MEM :
+		NIG_REG_INGRESS_BMAC0_MEM;
+
+	u32 val = 0x14;
+	if ((!(params->feature_config_flags &
+	      FEATURE_CONFIG_PFC_ENABLED)) &&
+		(vars->flow_ctrl & BNX2X_FLOW_CTRL_RX))
+		/* Enable BigMAC to react on received Pause packets */
+		val |= (1<<5);
+	wb_data[0] = val;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL, wb_data, 2);
+
+	/* tx control */
+	val = 0xc0;
+	if (!(params->feature_config_flags &
+	      FEATURE_CONFIG_PFC_ENABLED) &&
+		(vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
+		val |= 0x800000;
+	wb_data[0] = val;
+	wb_data[1] = 0;
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL, wb_data, 2);
+}
+
+static void bnx2x_update_pfc_bmac2(struct link_params *params,
+				   struct link_vars *vars,
+				   u8 is_lb)
 {
 	/*
 	 * Set rx control: Strip CRC and enable BigMAC to relay
@@ -397,7 +724,9 @@ static void bnx2x_update_bmac2(struct link_params *params,
 		NIG_REG_INGRESS_BMAC0_MEM;
 	u32 val = 0x14;
 
-	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
+	if ((!(params->feature_config_flags &
+	      FEATURE_CONFIG_PFC_ENABLED)) &&
+		(vars->flow_ctrl & BNX2X_FLOW_CTRL_RX))
 		/* Enable BigMAC to react on received Pause packets */
 		val |= (1<<5);
 	wb_data[0] = val;
@@ -408,14 +737,47 @@ static void bnx2x_update_bmac2(struct link_params *params,
 
 	/* Tx control */
 	val = 0xc0;
-	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+	if (!(params->feature_config_flags &
+				FEATURE_CONFIG_PFC_ENABLED) &&
+	    (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
 		val |= 0x800000;
 	wb_data[0] = val;
 	wb_data[1] = 0;
-	REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_CONTROL,
-			wb_data, 2);
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_CONTROL, wb_data, 2);
+
+	if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED) {
+		DP(NETIF_MSG_LINK, "PFC is enabled\n");
+		/* Enable PFC RX & TX & STATS and set 8 COS  */
+		wb_data[0] = 0x0;
+		wb_data[0] |= (1<<0);  /* RX */
+		wb_data[0] |= (1<<1);  /* TX */
+		wb_data[0] |= (1<<2);  /* Force initial Xon */
+		wb_data[0] |= (1<<3);  /* 8 cos */
+		wb_data[0] |= (1<<5);  /* STATS */
+		wb_data[1] = 0;
+		REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL,
+			    wb_data, 2);
+		/* Clear the force Xon */
+		wb_data[0] &= ~(1<<2);
+	} else {
+		DP(NETIF_MSG_LINK, "PFC is disabled\n");
+		/* disable PFC RX & TX & STATS and set 8 COS */
+		wb_data[0] = 0x8;
+		wb_data[1] = 0;
+	}
+
+	REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_PFC_CONTROL, wb_data, 2);
 
+	/**
+	* Set Time (based unit is 512 bit time) between automatic
+	* re-sending of PP packets amd enable automatic re-send of
+	* Per-Priroity Packet as long as pp_gen is asserted and
+	* pp_disable is low.
+	*/
 	val = 0x8000;
+	if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED)
+		val |= (1<<16); /* enable automatic re-send */
+
 	wb_data[0] = val;
 	wb_data[1] = 0;
 	REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_TX_PAUSE_CONTROL,
@@ -427,6 +789,9 @@ static void bnx2x_update_bmac2(struct link_params *params,
 		val |= 0x4; /* Local loopback */
 		DP(NETIF_MSG_LINK, "enable bmac loopback\n");
 	}
+	/* When PFC enabled, Pass pause frames towards the NIG. */
+	if (params->feature_config_flags & FEATURE_CONFIG_PFC_ENABLED)
+		val |= ((1<<6)|(1<<5));
 
 	wb_data[0] = val;
 	wb_data[1] = 0;
@@ -434,6 +799,239 @@ static void bnx2x_update_bmac2(struct link_params *params,
 			wb_data, 2);
 }
 
+static void bnx2x_update_pfc_brb(struct link_params *params,
+		struct link_vars *vars,
+		struct bnx2x_nig_brb_pfc_port_params *pfc_params)
+{
+	struct bnx2x *bp = params->bp;
+	int set_pfc = params->feature_config_flags &
+		FEATURE_CONFIG_PFC_ENABLED;
+
+	/* default - pause configuration */
+	u32 pause_xoff_th = PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_PAUSEABLE;
+	u32 pause_xon_th = PFC_BRB_MAC_PAUSE_XON_THRESHOLD_PAUSEABLE;
+	u32 full_xoff_th = PFC_BRB_MAC_FULL_XOFF_THRESHOLD_PAUSEABLE;
+	u32 full_xon_th = PFC_BRB_MAC_FULL_XON_THRESHOLD_PAUSEABLE;
+
+	if (set_pfc && pfc_params)
+		/* First COS */
+		if (!pfc_params->cos0_pauseable) {
+			pause_xoff_th =
+			  PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_NON_PAUSEABLE;
+			pause_xon_th =
+			  PFC_BRB_MAC_PAUSE_XON_THRESHOLD_NON_PAUSEABLE;
+			full_xoff_th =
+			  PFC_BRB_MAC_FULL_XOFF_THRESHOLD_NON_PAUSEABLE;
+			full_xon_th =
+			  PFC_BRB_MAC_FULL_XON_THRESHOLD_NON_PAUSEABLE;
+		}
+	/* The number of free blocks below which the pause signal to class 0
+	   of MAC #n is asserted. n=0,1 */
+	REG_WR(bp, BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0 , pause_xoff_th);
+	/* The number of free blocks above which the pause signal to class 0
+	   of MAC #n is de-asserted. n=0,1 */
+	REG_WR(bp, BRB1_REG_PAUSE_0_XON_THRESHOLD_0 , pause_xon_th);
+	/* The number of free blocks below which the full signal to class 0
+	   of MAC #n is asserted. n=0,1 */
+	REG_WR(bp, BRB1_REG_FULL_0_XOFF_THRESHOLD_0 , full_xoff_th);
+	/* The number of free blocks above which the full signal to class 0
+	   of MAC #n is de-asserted. n=0,1 */
+	REG_WR(bp, BRB1_REG_FULL_0_XON_THRESHOLD_0 , full_xon_th);
+
+	if (set_pfc && pfc_params) {
+		/* Second COS */
+		if (pfc_params->cos1_pauseable) {
+			pause_xoff_th =
+			  PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_PAUSEABLE;
+			pause_xon_th =
+			  PFC_BRB_MAC_PAUSE_XON_THRESHOLD_PAUSEABLE;
+			full_xoff_th =
+			  PFC_BRB_MAC_FULL_XOFF_THRESHOLD_PAUSEABLE;
+			full_xon_th =
+			  PFC_BRB_MAC_FULL_XON_THRESHOLD_PAUSEABLE;
+		} else {
+			pause_xoff_th =
+			  PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_NON_PAUSEABLE;
+			pause_xon_th =
+			  PFC_BRB_MAC_PAUSE_XON_THRESHOLD_NON_PAUSEABLE;
+			full_xoff_th =
+			  PFC_BRB_MAC_FULL_XOFF_THRESHOLD_NON_PAUSEABLE;
+			full_xon_th =
+			  PFC_BRB_MAC_FULL_XON_THRESHOLD_NON_PAUSEABLE;
+		}
+		/**
+		 * The number of free blocks below which the pause signal to
+		 * class 1 of MAC #n is asserted. n=0,1
+		 **/
+		REG_WR(bp, BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0, pause_xoff_th);
+		/**
+		 * The number of free blocks above which the pause signal to
+		 * class 1 of MAC #n is de-asserted. n=0,1
+		 **/
+		REG_WR(bp, BRB1_REG_PAUSE_1_XON_THRESHOLD_0, pause_xon_th);
+		/**
+		 * The number of free blocks below which the full signal to
+		 * class 1 of MAC #n is asserted. n=0,1
+		 **/
+		REG_WR(bp, BRB1_REG_FULL_1_XOFF_THRESHOLD_0, full_xoff_th);
+		/**
+		 * The number of free blocks above which the full signal to
+		 * class 1 of MAC #n is de-asserted. n=0,1
+		 **/
+		REG_WR(bp, BRB1_REG_FULL_1_XON_THRESHOLD_0, full_xon_th);
+	}
+}
+
+static void bnx2x_update_pfc_nig(struct link_params *params,
+		struct link_vars *vars,
+		struct bnx2x_nig_brb_pfc_port_params *nig_params)
+{
+	u32 xcm_mask = 0, ppp_enable = 0, pause_enable = 0, llfc_out_en = 0;
+	u32 llfc_enable = 0, xcm0_out_en = 0, p0_hwpfc_enable = 0;
+	u32 pkt_priority_to_cos = 0;
+	u32 val;
+	struct bnx2x *bp = params->bp;
+	int port = params->port;
+	int set_pfc = params->feature_config_flags &
+		FEATURE_CONFIG_PFC_ENABLED;
+	DP(NETIF_MSG_LINK, "updating pfc nig parameters\n");
+
+	/**
+	 * When NIG_LLH0_XCM_MASK_REG_LLHX_XCM_MASK_BCN bit is set
+	 * MAC control frames (that are not pause packets)
+	 * will be forwarded to the XCM.
+	 */
+	xcm_mask = REG_RD(bp,
+				port ? NIG_REG_LLH1_XCM_MASK :
+				NIG_REG_LLH0_XCM_MASK);
+	/**
+	 * nig params will override non PFC params, since it's possible to
+	 * do transition from PFC to SAFC
+	 */
+	if (set_pfc) {
+		pause_enable = 0;
+		llfc_out_en = 0;
+		llfc_enable = 0;
+		ppp_enable = 1;
+		xcm_mask &= ~(port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN :
+				     NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
+		xcm0_out_en = 0;
+		p0_hwpfc_enable = 1;
+	} else  {
+		if (nig_params) {
+			llfc_out_en = nig_params->llfc_out_en;
+			llfc_enable = nig_params->llfc_enable;
+			pause_enable = nig_params->pause_enable;
+		} else  /*defaul non PFC mode - PAUSE */
+			pause_enable = 1;
+
+		xcm_mask |= (port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN :
+			NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN);
+		xcm0_out_en = 1;
+	}
+
+	REG_WR(bp, port ? NIG_REG_LLFC_OUT_EN_1 :
+	       NIG_REG_LLFC_OUT_EN_0, llfc_out_en);
+	REG_WR(bp, port ? NIG_REG_LLFC_ENABLE_1 :
+	       NIG_REG_LLFC_ENABLE_0, llfc_enable);
+	REG_WR(bp, port ? NIG_REG_PAUSE_ENABLE_1 :
+	       NIG_REG_PAUSE_ENABLE_0, pause_enable);
+
+	REG_WR(bp, port ? NIG_REG_PPP_ENABLE_1 :
+	       NIG_REG_PPP_ENABLE_0, ppp_enable);
+
+	REG_WR(bp, port ? NIG_REG_LLH1_XCM_MASK :
+	       NIG_REG_LLH0_XCM_MASK, xcm_mask);
+
+	REG_WR(bp,  NIG_REG_LLFC_EGRESS_SRC_ENABLE_0, 0x7);
+
+	/* output enable for RX_XCM # IF */
+	REG_WR(bp, NIG_REG_XCM0_OUT_EN, xcm0_out_en);
+
+	/* HW PFC TX enable */
+	REG_WR(bp, NIG_REG_P0_HWPFC_ENABLE, p0_hwpfc_enable);
+
+	/* 0x2 = BMAC, 0x1= EMAC */
+	switch (vars->mac_type) {
+	case MAC_TYPE_EMAC:
+		val = 1;
+		break;
+	case MAC_TYPE_BMAC:
+		val = 0;
+		break;
+	default:
+		val = 0;
+		break;
+	}
+	REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT, val);
+
+	if (nig_params) {
+		pkt_priority_to_cos = nig_params->pkt_priority_to_cos;
+
+		REG_WR(bp, port ? NIG_REG_P1_RX_COS0_PRIORITY_MASK :
+		       NIG_REG_P0_RX_COS0_PRIORITY_MASK,
+		       nig_params->rx_cos0_priority_mask);
+
+		REG_WR(bp, port ? NIG_REG_P1_RX_COS1_PRIORITY_MASK :
+		       NIG_REG_P0_RX_COS1_PRIORITY_MASK,
+		       nig_params->rx_cos1_priority_mask);
+
+		REG_WR(bp, port ? NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1 :
+		       NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0,
+		       nig_params->llfc_high_priority_classes);
+
+		REG_WR(bp, port ? NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1 :
+		       NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0,
+		       nig_params->llfc_low_priority_classes);
+	}
+	REG_WR(bp, port ? NIG_REG_P1_PKT_PRIORITY_TO_COS :
+	       NIG_REG_P0_PKT_PRIORITY_TO_COS,
+	       pkt_priority_to_cos);
+}
+
+
+void bnx2x_update_pfc(struct link_params *params,
+		      struct link_vars *vars,
+		      struct bnx2x_nig_brb_pfc_port_params *pfc_params)
+{
+	/**
+	 * The PFC and pause are orthogonal to one another, meaning when
+	 * PFC is enabled, the pause are disabled, and when PFC is
+	 * disabled, pause are set according to the pause result.
+	 */
+	u32 val;
+	struct bnx2x *bp = params->bp;
+
+	/* update NIG params */
+	bnx2x_update_pfc_nig(params, vars, pfc_params);
+
+	/* update BRB params */
+	bnx2x_update_pfc_brb(params, vars, pfc_params);
+
+	if (!vars->link_up)
+		return;
+
+	val = REG_RD(bp, MISC_REG_RESET_REG_2);
+	if ((val & (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port))
+	    == 0) {
+		DP(NETIF_MSG_LINK, "About to update PFC in EMAC\n");
+		bnx2x_emac_enable(params, vars, 0);
+		return;
+	}
+
+	DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n");
+	if (CHIP_IS_E2(bp))
+		bnx2x_update_pfc_bmac2(params, vars, 0);
+	else
+		bnx2x_update_pfc_bmac1(params, vars);
+
+	val = 0;
+	if ((params->feature_config_flags &
+	      FEATURE_CONFIG_PFC_ENABLED) ||
+	    (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
+		val = 1;
+	REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + params->port*4, val);
+}
 
 static u8 bnx2x_bmac1_enable(struct link_params *params,
 			     struct link_vars *vars,
@@ -465,15 +1063,6 @@ static u8 bnx2x_bmac1_enable(struct link_params *params,
 	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_SOURCE_ADDR,
 		    wb_data, 2);
 
-	/* tx control */
-	val = 0xc0;
-	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
-		val |= 0x800000;
-	wb_data[0] = val;
-	wb_data[1] = 0;
-	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_TX_CONTROL,
-			wb_data, 2);
-
 	/* mac control */
 	val = 0x3;
 	if (is_lb) {
@@ -491,14 +1080,7 @@ static u8 bnx2x_bmac1_enable(struct link_params *params,
 	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_MAX_SIZE,
 			wb_data, 2);
 
-	/* rx control set to don't strip crc */
-	val = 0x14;
-	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_RX)
-		val |= 0x20;
-	wb_data[0] = val;
-	wb_data[1] = 0;
-	REG_WR_DMAE(bp, bmac_addr + BIGMAC_REGISTER_RX_CONTROL,
-			wb_data, 2);
+	bnx2x_update_pfc_bmac1(params, vars);
 
 	/* set tx mtu */
 	wb_data[0] = ETH_MAX_JUMBO_PACKET_SIZE + ETH_OVREHEAD;
@@ -595,7 +1177,7 @@ static u8 bnx2x_bmac2_enable(struct link_params *params,
 	REG_WR_DMAE(bp, bmac_addr + BIGMAC2_REGISTER_CNT_MAX_SIZE,
 			wb_data, 2);
 	udelay(30);
-	bnx2x_update_bmac2(params, vars, is_lb);
+	bnx2x_update_pfc_bmac2(params, vars, is_lb);
 
 	return 0;
 }
@@ -627,7 +1209,9 @@ static u8 bnx2x_bmac_enable(struct link_params *params,
 	REG_WR(bp, NIG_REG_XGXS_LANE_SEL_P0 + port*4, 0x0);
 	REG_WR(bp, NIG_REG_EGRESS_EMAC0_PORT + port*4, 0x0);
 	val = 0;
-	if (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX)
+	if ((params->feature_config_flags &
+	      FEATURE_CONFIG_PFC_ENABLED) ||
+	    (vars->flow_ctrl & BNX2X_FLOW_CTRL_TX))
 		val = 1;
 	REG_WR(bp, NIG_REG_BMAC0_PAUSE_OUT_EN + port*4, val);
 	REG_WR(bp, NIG_REG_EGRESS_EMAC0_OUT_EN + port*4, 0x0);
@@ -3904,7 +4488,7 @@ static u8 bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 			      MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
 		if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
 		    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE)
-			return 0;;
+			return 0;
 		msleep(1);
 	}
 	return -EINVAL;
@@ -3988,7 +4572,7 @@ static u8 bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 			      MDIO_PMA_REG_SFP_TWO_WIRE_CTRL, &val);
 		if ((val & MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK) ==
 		    MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE)
-			return 0;;
+			return 0;
 		msleep(1);
 	}
 
diff --git a/drivers/net/bnx2x/bnx2x_link.h b/drivers/net/bnx2x/bnx2x_link.h
index 171abf8097e..bedab1a942c 100644
--- a/drivers/net/bnx2x/bnx2x_link.h
+++ b/drivers/net/bnx2x/bnx2x_link.h
@@ -65,6 +65,22 @@
 #define FW_PARAM_MDIO_CTRL_OFFSET 16
 #define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \
 	(phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET)
+
+#define PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_PAUSEABLE		170
+#define PFC_BRB_MAC_PAUSE_XOFF_THRESHOLD_NON_PAUSEABLE		0
+
+#define PFC_BRB_MAC_PAUSE_XON_THRESHOLD_PAUSEABLE			250
+#define PFC_BRB_MAC_PAUSE_XON_THRESHOLD_NON_PAUSEABLE		0
+
+#define PFC_BRB_MAC_FULL_XOFF_THRESHOLD_PAUSEABLE			10
+#define PFC_BRB_MAC_FULL_XOFF_THRESHOLD_NON_PAUSEABLE		90
+
+#define PFC_BRB_MAC_FULL_XON_THRESHOLD_PAUSEABLE			50
+#define PFC_BRB_MAC_FULL_XON_THRESHOLD_NON_PAUSEABLE		250
+
+#define PFC_BRB_FULL_LB_XOFF_THRESHOLD				170
+#define PFC_BRB_FULL_LB_XON_THRESHOLD				250
+
 /***********************************************************/
 /*                         Structs                         */
 /***********************************************************/
@@ -216,6 +232,7 @@ struct link_params {
 
 	u32 feature_config_flags;
 #define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
+#define FEATURE_CONFIG_PFC_ENABLED		(1<<1)
 #define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY	(1<<2)
 #define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY	(1<<3)
 	/* Will be populated during common init */
@@ -332,4 +349,43 @@ u8 bnx2x_phy_probe(struct link_params *params);
 u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base,
 			     u32 shmem2_base, u8 port);
 
+/* PFC port configuration params */
+struct bnx2x_nig_brb_pfc_port_params {
+	/* NIG */
+	u32 pause_enable;
+	u32 llfc_out_en;
+	u32 llfc_enable;
+	u32 pkt_priority_to_cos;
+	u32 rx_cos0_priority_mask;
+	u32 rx_cos1_priority_mask;
+	u32 llfc_high_priority_classes;
+	u32 llfc_low_priority_classes;
+	/* BRB */
+	u32 cos0_pauseable;
+	u32 cos1_pauseable;
+};
+
+/**
+ * Used to update the PFC attributes in EMAC, BMAC, NIG and BRB
+ * when link is already up
+ */
+void bnx2x_update_pfc(struct link_params *params,
+		      struct link_vars *vars,
+		      struct bnx2x_nig_brb_pfc_port_params *pfc_params);
+
+
+/* Used to configure the ETS to disable */
+void bnx2x_ets_disabled(struct link_params *params);
+
+/* Used to configure the ETS to BW limited */
+void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw,
+						const u32 cos1_bw);
+
+/* Used to configure the ETS to strict */
+u8 bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos);
+
+/* Read pfc statistic*/
+void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars,
+						 u32 pfc_frames_sent[2],
+						 u32 pfc_frames_received[2]);
 #endif /* BNX2X_LINK_H */
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index e9ad16f00b5..489a5512a04 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -55,6 +55,7 @@
 #include "bnx2x_init.h"
 #include "bnx2x_init_ops.h"
 #include "bnx2x_cmn.h"
+#include "bnx2x_dcb.h"
 
 #include <linux/firmware.h>
 #include "bnx2x_fw_file_hdr.h"
@@ -121,6 +122,10 @@ MODULE_PARM_DESC(debug, " Default debug msglevel");
 
 static struct workqueue_struct *bnx2x_wq;
 
+#ifdef BCM_CNIC
+static u8 ALL_ENODE_MACS[] = {0x01, 0x10, 0x18, 0x01, 0x00, 0x01};
+#endif
+
 enum bnx2x_board_type {
 	BCM57710 = 0,
 	BCM57711 = 1,
@@ -921,7 +926,7 @@ void bnx2x_panic_dump(struct bnx2x *bp)
 	       sp_sb_data.p_func.vf_valid);
 
 
-	for_each_queue(bp, i) {
+	for_each_eth_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 		int loop;
 		struct hc_status_block_data_e2 sb_data_e2;
@@ -961,6 +966,10 @@ void bnx2x_panic_dump(struct bnx2x *bp)
 
 		/* host sb data */
 
+#ifdef BCM_CNIC
+		if (IS_FCOE_FP(fp))
+			continue;
+#endif
 		BNX2X_ERR("     run indexes (");
 		for (j = 0; j < HC_SB_MAX_SM; j++)
 			pr_cont("0x%x%s",
@@ -1029,7 +1038,7 @@ void bnx2x_panic_dump(struct bnx2x *bp)
 #ifdef BNX2X_STOP_ON_ERROR
 	/* Rings */
 	/* Rx */
-	for_each_queue(bp, i) {
+	for_each_rx_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		start = RX_BD(le16_to_cpu(*fp->rx_cons_sb) - 10);
@@ -1063,7 +1072,7 @@ void bnx2x_panic_dump(struct bnx2x *bp)
 	}
 
 	/* Tx */
-	for_each_queue(bp, i) {
+	for_each_tx_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		start = TX_BD(le16_to_cpu(*fp->tx_cons_sb) - 10);
@@ -1298,7 +1307,7 @@ void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
 #ifdef BCM_CNIC
 		offset++;
 #endif
-		for_each_queue(bp, i)
+		for_each_eth_queue(bp, i)
 			synchronize_irq(bp->msix_table[i + offset].vector);
 	} else
 		synchronize_irq(bp->pdev->irq);
@@ -1420,7 +1429,7 @@ irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
 		return IRQ_HANDLED;
 #endif
 
-	for_each_queue(bp, i) {
+	for_each_eth_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		mask = 0x2 << (fp->index + CNIC_CONTEXT_USE);
@@ -2026,13 +2035,28 @@ static int bnx2x_get_cmng_fns_mode(struct bnx2x *bp)
 
 static void bnx2x_read_mf_cfg(struct bnx2x *bp)
 {
-	int vn;
+	int vn, n = (CHIP_MODE_IS_4_PORT(bp) ? 2 : 1);
 
 	if (BP_NOMCP(bp))
 		return; /* what should be the default bvalue in this case */
 
+	/* For 2 port configuration the absolute function number formula
+	 * is:
+	 *      abs_func = 2 * vn + BP_PORT + BP_PATH
+	 *
+	 *      and there are 4 functions per port
+	 *
+	 * For 4 port configuration it is
+	 *      abs_func = 4 * vn + 2 * BP_PORT + BP_PATH
+	 *
+	 *      and there are 2 functions per port
+	 */
 	for (vn = VN_0; vn < E1HVN_MAX; vn++) {
-		int /*abs*/func = 2*vn + BP_PORT(bp);
+		int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp);
+
+		if (func >= E1H_FUNC_MAX)
+			break;
+
 		bp->mf_config[vn] =
 			MF_CFG_RD(bp, func_mf_config[func].config);
 	}
@@ -2238,6 +2262,15 @@ u32 bnx2x_fw_command(struct bnx2x *bp, u32 command, u32 param)
 	return rc;
 }
 
+static u8 stat_counter_valid(struct bnx2x *bp, struct bnx2x_fastpath *fp)
+{
+#ifdef BCM_CNIC
+	if (IS_FCOE_FP(fp) && IS_MF(bp))
+		return false;
+#endif
+	return true;
+}
+
 /* must be called under rtnl_lock */
 static void bnx2x_rxq_set_mac_filters(struct bnx2x *bp, u16 cl_id, u32 filters)
 {
@@ -2248,10 +2281,21 @@ static void bnx2x_rxq_set_mac_filters(struct bnx2x *bp, u16 cl_id, u32 filters)
 	u8 accp_all_ucast = 0, accp_all_bcast = 0, accp_all_mcast = 0;
 	u8 unmatched_unicast = 0;
 
+	if (filters & BNX2X_ACCEPT_UNMATCHED_UCAST)
+		unmatched_unicast = 1;
+
 	if (filters & BNX2X_PROMISCUOUS_MODE) {
 		/* promiscious - accept all, drop none */
 		drop_all_ucast = drop_all_bcast = drop_all_mcast = 0;
 		accp_all_ucast = accp_all_bcast = accp_all_mcast = 1;
+		if (IS_MF_SI(bp)) {
+			/*
+			 * SI mode defines to accept in promiscuos mode
+			 * only unmatched packets
+			 */
+			unmatched_unicast = 1;
+			accp_all_ucast = 0;
+		}
 	}
 	if (filters & BNX2X_ACCEPT_UNICAST) {
 		/* accept matched ucast */
@@ -2260,6 +2304,11 @@ static void bnx2x_rxq_set_mac_filters(struct bnx2x *bp, u16 cl_id, u32 filters)
 	if (filters & BNX2X_ACCEPT_MULTICAST) {
 		/* accept matched mcast */
 		drop_all_mcast = 0;
+		if (IS_MF_SI(bp))
+			/* since mcast addresses won't arrive with ovlan,
+			 * fw needs to accept all of them in
+			 * switch-independent mode */
+			accp_all_mcast = 1;
 	}
 	if (filters & BNX2X_ACCEPT_ALL_UNICAST) {
 		/* accept all mcast */
@@ -2372,7 +2421,7 @@ static inline u16 bnx2x_get_cl_flags(struct bnx2x *bp,
 	/* calculate queue flags */
 	flags |= QUEUE_FLG_CACHE_ALIGN;
 	flags |= QUEUE_FLG_HC;
-	flags |= IS_MF(bp) ? QUEUE_FLG_OV : 0;
+	flags |= IS_MF_SD(bp) ? QUEUE_FLG_OV : 0;
 
 	flags |= QUEUE_FLG_VLAN;
 	DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
@@ -2380,7 +2429,8 @@ static inline u16 bnx2x_get_cl_flags(struct bnx2x *bp,
 	if (!fp->disable_tpa)
 		flags |= QUEUE_FLG_TPA;
 
-	flags |= QUEUE_FLG_STATS;
+	flags = stat_counter_valid(bp, fp) ?
+			(flags | QUEUE_FLG_STATS) : (flags & ~QUEUE_FLG_STATS);
 
 	return flags;
 }
@@ -2440,7 +2490,10 @@ static void bnx2x_pf_rx_cl_prep(struct bnx2x *bp,
 	rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
 	rxq_init->fw_sb_id = fp->fw_sb_id;
 
-	rxq_init->sb_cq_index = U_SB_ETH_RX_CQ_INDEX;
+	if (IS_FCOE_FP(fp))
+		rxq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_RX_CQ_CONS;
+	else
+		rxq_init->sb_cq_index = U_SB_ETH_RX_CQ_INDEX;
 
 	rxq_init->cid = HW_CID(bp, fp->cid);
 
@@ -2460,6 +2513,12 @@ static void bnx2x_pf_tx_cl_prep(struct bnx2x *bp,
 	txq_init->sb_cq_index = C_SB_ETH_TX_CQ_INDEX;
 	txq_init->traffic_type = LLFC_TRAFFIC_TYPE_NW;
 	txq_init->fw_sb_id = fp->fw_sb_id;
+
+	if (IS_FCOE_FP(fp)) {
+		txq_init->sb_cq_index = HC_SP_INDEX_ETH_FCOE_TX_CQ_CONS;
+		txq_init->traffic_type = LLFC_TRAFFIC_TYPE_FCOE;
+	}
+
 	txq_init->hc_rate = bp->tx_ticks ? (1000000 / bp->tx_ticks) : 0;
 }
 
@@ -2573,6 +2632,26 @@ static void bnx2x_e1h_enable(struct bnx2x *bp)
 	 */
 }
 
+/* called due to MCP event (on pmf):
+ *	reread new bandwidth configuration
+ *	configure FW
+ *	notify others function about the change
+ */
+static inline void bnx2x_config_mf_bw(struct bnx2x *bp)
+{
+	if (bp->link_vars.link_up) {
+		bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX);
+		bnx2x_link_sync_notify(bp);
+	}
+	storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
+}
+
+static inline void bnx2x_set_mf_bw(struct bnx2x *bp)
+{
+	bnx2x_config_mf_bw(bp);
+	bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW_ACK, 0);
+}
+
 static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
 {
 	DP(BNX2X_MSG_MCP, "dcc_event 0x%x\n", dcc_event);
@@ -2598,10 +2677,7 @@ static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
 		dcc_event &= ~DRV_STATUS_DCC_DISABLE_ENABLE_PF;
 	}
 	if (dcc_event & DRV_STATUS_DCC_BANDWIDTH_ALLOCATION) {
-
-		bnx2x_cmng_fns_init(bp, true, CMNG_FNS_MINMAX);
-		bnx2x_link_sync_notify(bp);
-		storm_memset_cmng(bp, &bp->cmng, BP_PORT(bp));
+		bnx2x_config_mf_bw(bp);
 		dcc_event &= ~DRV_STATUS_DCC_BANDWIDTH_ALLOCATION;
 	}
 
@@ -3022,10 +3098,20 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn)
 			if (val & DRV_STATUS_DCC_EVENT_MASK)
 				bnx2x_dcc_event(bp,
 					    (val & DRV_STATUS_DCC_EVENT_MASK));
+
+			if (val & DRV_STATUS_SET_MF_BW)
+				bnx2x_set_mf_bw(bp);
+
 			bnx2x__link_status_update(bp);
 			if ((bp->port.pmf == 0) && (val & DRV_STATUS_PMF))
 				bnx2x_pmf_update(bp);
 
+			if (bp->port.pmf &&
+			    (val & DRV_STATUS_DCBX_NEGOTIATION_RESULTS) &&
+				bp->dcbx_enabled > 0)
+				/* start dcbx state machine */
+				bnx2x_dcbx_set_params(bp,
+					BNX2X_DCBX_STATE_NEG_RECEIVED);
 		} else if (attn & BNX2X_MC_ASSERT_BITS) {
 
 			BNX2X_ERR("MC assert!\n");
@@ -3637,11 +3723,23 @@ static void bnx2x_eq_int(struct bnx2x *bp)
 #ifdef BCM_CNIC
 			if (!bnx2x_cnic_handle_cfc_del(bp, cid, elem))
 				goto next_spqe;
+			if (cid == BNX2X_FCOE_ETH_CID)
+				bnx2x_fcoe(bp, state) = BNX2X_FP_STATE_CLOSED;
+			else
 #endif
-			bnx2x_fp(bp, cid, state) =
+				bnx2x_fp(bp, cid, state) =
 						BNX2X_FP_STATE_CLOSED;
 
 			goto next_spqe;
+
+		case EVENT_RING_OPCODE_STOP_TRAFFIC:
+			DP(NETIF_MSG_IFUP, "got STOP TRAFFIC\n");
+			bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_PAUSED);
+			goto next_spqe;
+		case EVENT_RING_OPCODE_START_TRAFFIC:
+			DP(NETIF_MSG_IFUP, "got START TRAFFIC\n");
+			bnx2x_dcbx_set_params(bp, BNX2X_DCBX_STATE_TX_RELEASED);
+			goto next_spqe;
 		}
 
 		switch (opcode | bp->state) {
@@ -3714,7 +3812,13 @@ static void bnx2x_sp_task(struct work_struct *work)
 
 	/* SP events: STAT_QUERY and others */
 	if (status & BNX2X_DEF_SB_IDX) {
+#ifdef BCM_CNIC
+		struct bnx2x_fastpath *fp = bnx2x_fcoe_fp(bp);
 
+		if ((!NO_FCOE(bp)) &&
+			(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp)))
+			napi_schedule(&bnx2x_fcoe(bp, napi));
+#endif
 		/* Handle EQ completions */
 		bnx2x_eq_int(bp);
 
@@ -4097,7 +4201,7 @@ void bnx2x_update_coalesce(struct bnx2x *bp)
 {
 	int i;
 
-	for_each_queue(bp, i)
+	for_each_eth_queue(bp, i)
 		bnx2x_update_coalesce_sb(bp, bp->fp[i].fw_sb_id,
 					 bp->rx_ticks, bp->tx_ticks);
 }
@@ -4145,13 +4249,16 @@ static void bnx2x_init_ind_table(struct bnx2x *bp)
 	for (i = 0; i < TSTORM_INDIRECTION_TABLE_SIZE; i++)
 		REG_WR8(bp, BAR_TSTRORM_INTMEM +
 			TSTORM_INDIRECTION_TABLE_OFFSET(func) + i,
-			bp->fp->cl_id + (i % bp->num_queues));
+			bp->fp->cl_id + (i % (bp->num_queues -
+				NONE_ETH_CONTEXT_USE)));
 }
 
 void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 {
 	int mode = bp->rx_mode;
+	int port = BP_PORT(bp);
 	u16 cl_id;
+	u32 def_q_filters = 0;
 
 	/* All but management unicast packets should pass to the host as well */
 	u32 llh_mask =
@@ -4162,30 +4269,42 @@ void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 
 	switch (mode) {
 	case BNX2X_RX_MODE_NONE: /* no Rx */
-		cl_id = BP_L_ID(bp);
-		bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_NONE);
+		def_q_filters = BNX2X_ACCEPT_NONE;
+#ifdef BCM_CNIC
+		if (!NO_FCOE(bp)) {
+			cl_id = bnx2x_fcoe(bp, cl_id);
+			bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_NONE);
+		}
+#endif
 		break;
 
 	case BNX2X_RX_MODE_NORMAL:
-		cl_id = BP_L_ID(bp);
-		bnx2x_rxq_set_mac_filters(bp, cl_id,
-			BNX2X_ACCEPT_UNICAST |
-			BNX2X_ACCEPT_BROADCAST |
-			BNX2X_ACCEPT_MULTICAST);
+		def_q_filters |= BNX2X_ACCEPT_UNICAST | BNX2X_ACCEPT_BROADCAST |
+				BNX2X_ACCEPT_MULTICAST;
+#ifdef BCM_CNIC
+		cl_id = bnx2x_fcoe(bp, cl_id);
+		bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST |
+					  BNX2X_ACCEPT_MULTICAST);
+#endif
 		break;
 
 	case BNX2X_RX_MODE_ALLMULTI:
-		cl_id = BP_L_ID(bp);
-		bnx2x_rxq_set_mac_filters(bp, cl_id,
-			BNX2X_ACCEPT_UNICAST |
-			BNX2X_ACCEPT_BROADCAST |
-			BNX2X_ACCEPT_ALL_MULTICAST);
+		def_q_filters |= BNX2X_ACCEPT_UNICAST | BNX2X_ACCEPT_BROADCAST |
+				BNX2X_ACCEPT_ALL_MULTICAST;
+#ifdef BCM_CNIC
+		cl_id = bnx2x_fcoe(bp, cl_id);
+		bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST |
+					  BNX2X_ACCEPT_MULTICAST);
+#endif
 		break;
 
 	case BNX2X_RX_MODE_PROMISC:
-		cl_id = BP_L_ID(bp);
-		bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_PROMISCUOUS_MODE);
-
+		def_q_filters |= BNX2X_PROMISCUOUS_MODE;
+#ifdef BCM_CNIC
+		cl_id = bnx2x_fcoe(bp, cl_id);
+		bnx2x_rxq_set_mac_filters(bp, cl_id, BNX2X_ACCEPT_UNICAST |
+					  BNX2X_ACCEPT_MULTICAST);
+#endif
 		/* pass management unicast packets as well */
 		llh_mask |= NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST;
 		break;
@@ -4195,20 +4314,24 @@ void bnx2x_set_storm_rx_mode(struct bnx2x *bp)
 		break;
 	}
 
+	cl_id = BP_L_ID(bp);
+	bnx2x_rxq_set_mac_filters(bp, cl_id, def_q_filters);
+
 	REG_WR(bp,
-	       BP_PORT(bp) ? NIG_REG_LLH1_BRB1_DRV_MASK :
-			     NIG_REG_LLH0_BRB1_DRV_MASK,
-	       llh_mask);
+	       (port ? NIG_REG_LLH1_BRB1_DRV_MASK :
+		       NIG_REG_LLH0_BRB1_DRV_MASK), llh_mask);
 
 	DP(NETIF_MSG_IFUP, "rx mode %d\n"
 		"drop_ucast 0x%x\ndrop_mcast 0x%x\ndrop_bcast 0x%x\n"
-		"accp_ucast 0x%x\naccp_mcast 0x%x\naccp_bcast 0x%x\n", mode,
+		"accp_ucast 0x%x\naccp_mcast 0x%x\naccp_bcast 0x%x\n"
+		"unmatched_ucast 0x%x\n", mode,
 		bp->mac_filters.ucast_drop_all,
 		bp->mac_filters.mcast_drop_all,
 		bp->mac_filters.bcast_drop_all,
 		bp->mac_filters.ucast_accept_all,
 		bp->mac_filters.mcast_accept_all,
-		bp->mac_filters.bcast_accept_all
+		bp->mac_filters.bcast_accept_all,
+		bp->mac_filters.unmatched_unicast
 	);
 
 	storm_memset_mac_filters(bp, &bp->mac_filters, BP_FUNC(bp));
@@ -4232,6 +4355,15 @@ static void bnx2x_init_internal_common(struct bnx2x *bp)
 			bp->mf_mode);
 	}
 
+	if (IS_MF_SI(bp))
+		/*
+		 * In switch independent mode, the TSTORM needs to accept
+		 * packets that failed classification, since approximate match
+		 * mac addresses aren't written to NIG LLH
+		 */
+		REG_WR8(bp, BAR_TSTRORM_INTMEM +
+			    TSTORM_ACCEPT_CLASSIFY_FAILED_OFFSET, 2);
+
 	/* Zero this manually as its initialization is
 	   currently missing in the initTool */
 	for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
@@ -4247,6 +4379,7 @@ static void bnx2x_init_internal_common(struct bnx2x *bp)
 static void bnx2x_init_internal_port(struct bnx2x *bp)
 {
 	/* port */
+	bnx2x_dcb_init_intmem_pfc(bp);
 }
 
 static void bnx2x_init_internal(struct bnx2x *bp, u32 load_code)
@@ -4308,9 +4441,11 @@ void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
 {
 	int i;
 
-	for_each_queue(bp, i)
+	for_each_eth_queue(bp, i)
 		bnx2x_init_fp_sb(bp, i);
 #ifdef BCM_CNIC
+	if (!NO_FCOE(bp))
+		bnx2x_init_fcoe_fp(bp);
 
 	bnx2x_init_sb(bp, bp->cnic_sb_mapping,
 		      BNX2X_VF_ID_INVALID, false,
@@ -5048,12 +5183,12 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 #endif
 	if (!CHIP_IS_E1(bp))
-		REG_WR(bp, PRS_REG_E1HOV_MODE, IS_MF(bp));
+		REG_WR(bp, PRS_REG_E1HOV_MODE, IS_MF_SD(bp));
 
 	if (CHIP_IS_E2(bp)) {
 		/* Bit-map indicating which L2 hdrs may appear after the
 		   basic Ethernet header */
-		int has_ovlan = IS_MF(bp);
+		int has_ovlan = IS_MF_SD(bp);
 		REG_WR(bp, PRS_REG_HDRS_AFTER_BASIC, (has_ovlan ? 7 : 6));
 		REG_WR(bp, PRS_REG_MUST_HAVE_HDRS, (has_ovlan ? 1 : 0));
 	}
@@ -5087,7 +5222,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
 	bnx2x_init_block(bp, PBF_BLOCK, COMMON_STAGE);
 
 	if (CHIP_IS_E2(bp)) {
-		int has_ovlan = IS_MF(bp);
+		int has_ovlan = IS_MF_SD(bp);
 		REG_WR(bp, PBF_REG_HDRS_AFTER_BASIC, (has_ovlan ? 7 : 6));
 		REG_WR(bp, PBF_REG_MUST_HAVE_HDRS, (has_ovlan ? 1 : 0));
 	}
@@ -5164,12 +5299,12 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
 	bnx2x_init_block(bp, NIG_BLOCK, COMMON_STAGE);
 	if (!CHIP_IS_E1(bp)) {
 		REG_WR(bp, NIG_REG_LLH_MF_MODE, IS_MF(bp));
-		REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF(bp));
+		REG_WR(bp, NIG_REG_LLH_E1HOV_MODE, IS_MF_SD(bp));
 	}
 	if (CHIP_IS_E2(bp)) {
 		/* Bit-map indicating which L2 hdrs may appear after the
 		   basic Ethernet header */
-		REG_WR(bp, NIG_REG_P0_HDRS_AFTER_BASIC, (IS_MF(bp) ? 7 : 6));
+		REG_WR(bp, NIG_REG_P0_HDRS_AFTER_BASIC, (IS_MF_SD(bp) ? 7 : 6));
 	}
 
 	if (CHIP_REV_IS_SLOW(bp))
@@ -5370,8 +5505,10 @@ static int bnx2x_init_hw_port(struct bnx2x *bp)
 	 *  - SF mode: bits 3-7 are masked. only bits 0-2 are in use
 	 *  - MF mode: bit 3 is masked. bits 0-2 are in use as in SF
 	 *             bits 4-7 are used for "per vn group attention" */
-	REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4,
-	       (IS_MF(bp) ? 0xF7 : 0x7));
+	val = IS_MF(bp) ? 0xF7 : 0x7;
+	/* Enable DCBX attention for all but E1 */
+	val |= CHIP_IS_E1(bp) ? 0 : 0x10;
+	REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val);
 
 	bnx2x_init_block(bp, PXPCS_BLOCK, init_stage);
 	bnx2x_init_block(bp, EMAC0_BLOCK, init_stage);
@@ -5386,7 +5523,7 @@ static int bnx2x_init_hw_port(struct bnx2x *bp)
 	if (!CHIP_IS_E1(bp)) {
 		/* 0x2 disable mf_ov, 0x1 enable */
 		REG_WR(bp, NIG_REG_LLH0_BRB1_DRV_MASK_MF + port*4,
-		       (IS_MF(bp) ? 0x1 : 0x2));
+		       (IS_MF_SD(bp) ? 0x1 : 0x2));
 
 		if (CHIP_IS_E2(bp)) {
 			val = 0;
@@ -5816,6 +5953,15 @@ void bnx2x_free_mem(struct bnx2x *bp)
 	/* fastpath */
 	/* Common */
 	for_each_queue(bp, i) {
+#ifdef BCM_CNIC
+		/* FCoE client uses default status block */
+		if (IS_FCOE_IDX(i)) {
+			union host_hc_status_block *sb =
+				&bnx2x_fp(bp, i, status_blk);
+			memset(sb, 0, sizeof(union host_hc_status_block));
+			bnx2x_fp(bp, i, status_blk_mapping) = 0;
+		} else {
+#endif
 		/* status blocks */
 		if (CHIP_IS_E2(bp))
 			BNX2X_PCI_FREE(bnx2x_fp(bp, i, status_blk.e2_sb),
@@ -5825,9 +5971,12 @@ void bnx2x_free_mem(struct bnx2x *bp)
 			BNX2X_PCI_FREE(bnx2x_fp(bp, i, status_blk.e1x_sb),
 				       bnx2x_fp(bp, i, status_blk_mapping),
 				       sizeof(struct host_hc_status_block_e1x));
+#ifdef BCM_CNIC
+		}
+#endif
 	}
 	/* Rx */
-	for_each_queue(bp, i) {
+	for_each_rx_queue(bp, i) {
 
 		/* fastpath rx rings: rx_buf rx_desc rx_comp */
 		BNX2X_FREE(bnx2x_fp(bp, i, rx_buf_ring));
@@ -5847,7 +5996,7 @@ void bnx2x_free_mem(struct bnx2x *bp)
 			       BCM_PAGE_SIZE * NUM_RX_SGE_PAGES);
 	}
 	/* Tx */
-	for_each_queue(bp, i) {
+	for_each_tx_queue(bp, i) {
 
 		/* fastpath tx rings: tx_buf tx_desc */
 		BNX2X_FREE(bnx2x_fp(bp, i, tx_buf_ring));
@@ -5931,15 +6080,20 @@ int bnx2x_alloc_mem(struct bnx2x *bp)
 		union host_hc_status_block *sb = &bnx2x_fp(bp, i, status_blk);
 		bnx2x_fp(bp, i, bp) = bp;
 		/* status blocks */
-		if (CHIP_IS_E2(bp))
-			BNX2X_PCI_ALLOC(sb->e2_sb,
-				&bnx2x_fp(bp, i, status_blk_mapping),
-				sizeof(struct host_hc_status_block_e2));
-		else
-			BNX2X_PCI_ALLOC(sb->e1x_sb,
-				&bnx2x_fp(bp, i, status_blk_mapping),
-				sizeof(struct host_hc_status_block_e1x));
-
+#ifdef BCM_CNIC
+		if (!IS_FCOE_IDX(i)) {
+#endif
+			if (CHIP_IS_E2(bp))
+				BNX2X_PCI_ALLOC(sb->e2_sb,
+				    &bnx2x_fp(bp, i, status_blk_mapping),
+				    sizeof(struct host_hc_status_block_e2));
+			else
+				BNX2X_PCI_ALLOC(sb->e1x_sb,
+				    &bnx2x_fp(bp, i, status_blk_mapping),
+				    sizeof(struct host_hc_status_block_e1x));
+#ifdef BCM_CNIC
+		}
+#endif
 		set_sb_shortcuts(bp, i);
 	}
 	/* Rx */
@@ -6055,7 +6209,7 @@ static int bnx2x_func_stop(struct bnx2x *bp)
  * @param cam_offset offset in a CAM to use
  * @param is_bcast is the set MAC a broadcast address (for E1 only)
  */
-static void bnx2x_set_mac_addr_gen(struct bnx2x *bp, int set, u8 *mac,
+static void bnx2x_set_mac_addr_gen(struct bnx2x *bp, int set, const u8 *mac,
 				   u32 cl_bit_vec, u8 cam_offset,
 				   u8 is_bcast)
 {
@@ -6170,6 +6324,70 @@ static u8 bnx2x_e1h_cam_offset(struct bnx2x *bp, u8 rel_offset)
 		return BP_VN(bp) * 32  + rel_offset;
 }
 
+/**
+ *  LLH CAM line allocations: currently only iSCSI and ETH macs are
+ *  relevant. In addition, current implementation is tuned for a
+ *  single ETH MAC.
+ *
+ *  When multiple unicast ETH MACs PF configuration in switch
+ *  independent mode is required (NetQ, multiple netdev MACs,
+ *  etc.), consider better utilisation of 16 per function MAC
+ *  entries in the LLH memory.
+ */
+enum {
+	LLH_CAM_ISCSI_ETH_LINE = 0,
+	LLH_CAM_ETH_LINE,
+	LLH_CAM_MAX_PF_LINE = NIG_REG_LLH1_FUNC_MEM_SIZE
+};
+
+static void bnx2x_set_mac_in_nig(struct bnx2x *bp,
+			  int set,
+			  unsigned char *dev_addr,
+			  int index)
+{
+	u32 wb_data[2];
+	u32 mem_offset, ena_offset, mem_index;
+	/**
+	 * indexes mapping:
+	 * 0..7 - goes to MEM
+	 * 8..15 - goes to MEM2
+	 */
+
+	if (!IS_MF_SI(bp) || index > LLH_CAM_MAX_PF_LINE)
+		return;
+
+	/* calculate memory start offset according to the mapping
+	 * and index in the memory */
+	if (index < NIG_LLH_FUNC_MEM_MAX_OFFSET) {
+		mem_offset = BP_PORT(bp) ? NIG_REG_LLH1_FUNC_MEM :
+					   NIG_REG_LLH0_FUNC_MEM;
+		ena_offset = BP_PORT(bp) ? NIG_REG_LLH1_FUNC_MEM_ENABLE :
+					   NIG_REG_LLH0_FUNC_MEM_ENABLE;
+		mem_index = index;
+	} else {
+		mem_offset = BP_PORT(bp) ? NIG_REG_P1_LLH_FUNC_MEM2 :
+					   NIG_REG_P0_LLH_FUNC_MEM2;
+		ena_offset = BP_PORT(bp) ? NIG_REG_P1_LLH_FUNC_MEM2_ENABLE :
+					   NIG_REG_P0_LLH_FUNC_MEM2_ENABLE;
+		mem_index = index - NIG_LLH_FUNC_MEM_MAX_OFFSET;
+	}
+
+	if (set) {
+		/* LLH_FUNC_MEM is a u64 WB register */
+		mem_offset += 8*mem_index;
+
+		wb_data[0] = ((dev_addr[2] << 24) | (dev_addr[3] << 16) |
+			      (dev_addr[4] <<  8) |  dev_addr[5]);
+		wb_data[1] = ((dev_addr[0] <<  8) |  dev_addr[1]);
+
+		REG_WR_DMAE(bp, mem_offset, wb_data, 2);
+	}
+
+	/* enable/disable the entry */
+	REG_WR(bp, ena_offset + 4*mem_index, set);
+
+}
+
 void bnx2x_set_eth_mac(struct bnx2x *bp, int set)
 {
 	u8 cam_offset = (CHIP_IS_E1(bp) ? (BP_PORT(bp) ? 32 : 0) :
@@ -6179,9 +6397,13 @@ void bnx2x_set_eth_mac(struct bnx2x *bp, int set)
 	bnx2x_set_mac_addr_gen(bp, set, bp->dev->dev_addr,
 			       (1 << bp->fp->cl_id), cam_offset , 0);
 
+	bnx2x_set_mac_in_nig(bp, set, bp->dev->dev_addr, LLH_CAM_ETH_LINE);
+
 	if (CHIP_IS_E1(bp)) {
 		/* broadcast MAC */
-		u8 bcast[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+		static const u8 bcast[ETH_ALEN] = {
+			0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+		};
 		bnx2x_set_mac_addr_gen(bp, set, bcast, 0, cam_offset + 1, 1);
 	}
 }
@@ -6283,12 +6505,59 @@ static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp, int set)
 {
 	u8 cam_offset = (CHIP_IS_E1(bp) ? ((BP_PORT(bp) ? 32 : 0) + 2) :
 			 bnx2x_e1h_cam_offset(bp, CAM_ISCSI_ETH_LINE));
-	u32 iscsi_l2_cl_id = BNX2X_ISCSI_ETH_CL_ID;
+	u32 iscsi_l2_cl_id = BNX2X_ISCSI_ETH_CL_ID +
+		BP_E1HVN(bp) * NONE_ETH_CONTEXT_USE;
 	u32 cl_bit_vec = (1 << iscsi_l2_cl_id);
 
 	/* Send a SET_MAC ramrod */
 	bnx2x_set_mac_addr_gen(bp, set, bp->iscsi_mac, cl_bit_vec,
 			       cam_offset, 0);
+
+	bnx2x_set_mac_in_nig(bp, set, bp->iscsi_mac, LLH_CAM_ISCSI_ETH_LINE);
+
+	return 0;
+}
+
+/**
+ * Set FCoE L2 MAC(s) at the next enties in the CAM after the
+ * ETH MAC(s). This function will wait until the ramdord
+ * completion returns.
+ *
+ * @param bp driver handle
+ * @param set set or clear the CAM entry
+ *
+ * @return 0 if cussess, -ENODEV if ramrod doesn't return.
+ */
+int bnx2x_set_fip_eth_mac_addr(struct bnx2x *bp, int set)
+{
+	u32 cl_bit_vec = (1 << bnx2x_fcoe(bp, cl_id));
+	/**
+	 * CAM allocation for E1H
+	 * eth unicasts: by func number
+	 * iscsi: by func number
+	 * fip unicast: by func number
+	 * fip multicast: by func number
+	 */
+	bnx2x_set_mac_addr_gen(bp, set, bp->fip_mac,
+		cl_bit_vec, bnx2x_e1h_cam_offset(bp, CAM_FIP_ETH_LINE), 0);
+
+	return 0;
+}
+
+int bnx2x_set_all_enode_macs(struct bnx2x *bp, int set)
+{
+	u32 cl_bit_vec = (1 << bnx2x_fcoe(bp, cl_id));
+
+	/**
+	 * CAM allocation for E1H
+	 * eth unicasts: by func number
+	 * iscsi: by func number
+	 * fip unicast: by func number
+	 * fip multicast: by func number
+	 */
+	bnx2x_set_mac_addr_gen(bp, set, ALL_ENODE_MACS,	cl_bit_vec,
+		bnx2x_e1h_cam_offset(bp, CAM_FIP_MCAST_LINE), 0);
+
 	return 0;
 }
 #endif
@@ -6306,6 +6575,8 @@ static void bnx2x_fill_cl_init_data(struct bnx2x *bp,
 	data->general.statistics_counter_id = params->rxq_params.stat_id;
 	data->general.statistics_en_flg =
 		(params->rxq_params.flags & QUEUE_FLG_STATS) ? 1 : 0;
+	data->general.is_fcoe_flg =
+		(params->ramrod_params.flags & CLIENT_IS_FCOE) ? 1 : 0;
 	data->general.activate_flg = activate;
 	data->general.sp_client_id = params->rxq_params.spcl_id;
 
@@ -6374,7 +6645,9 @@ static void bnx2x_fill_cl_init_data(struct bnx2x *bp,
 	data->fc.safc_group_num = params->txq_params.cos;
 	data->fc.safc_group_en_flg =
 		(params->txq_params.flags & QUEUE_FLG_COS) ? 1 : 0;
-	data->fc.traffic_type = LLFC_TRAFFIC_TYPE_NW;
+	data->fc.traffic_type =
+		(params->ramrod_params.flags & CLIENT_IS_FCOE) ?
+		LLFC_TRAFFIC_TYPE_FCOE : LLFC_TRAFFIC_TYPE_NW;
 }
 
 static inline void bnx2x_set_ctx_validation(struct eth_context *cxt, u32 cid)
@@ -6473,7 +6746,7 @@ static int __devinit bnx2x_set_int_mode(struct bnx2x *bp)
 		bnx2x_enable_msi(bp);
 		/* falling through... */
 	case INT_MODE_INTx:
-		bp->num_queues = 1;
+		bp->num_queues = 1 + NONE_ETH_CONTEXT_USE;
 		DP(NETIF_MSG_IFUP, "set number of queues to 1\n");
 		break;
 	default:
@@ -6496,8 +6769,8 @@ static int __devinit bnx2x_set_int_mode(struct bnx2x *bp)
 					  "enable MSI-X (%d), "
 					  "set number of queues to %d\n",
 				   bp->num_queues,
-				   1);
-			bp->num_queues = 1;
+				   1 + NONE_ETH_CONTEXT_USE);
+			bp->num_queues = 1 + NONE_ETH_CONTEXT_USE;
 
 			if (!(bp->flags & DISABLE_MSI_FLAG))
 				bnx2x_enable_msi(bp);
@@ -6618,7 +6891,9 @@ int bnx2x_setup_client(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	struct bnx2x_client_init_params params = { {0} };
 	int rc;
 
-	bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0,
+	/* reset IGU state skip FCoE L2 queue */
+	if (!IS_FCOE_FP(fp))
+		bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0,
 			     IGU_INT_ENABLE, 0);
 
 	params.ramrod_params.pstate = &fp->state;
@@ -6626,6 +6901,12 @@ int bnx2x_setup_client(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	params.ramrod_params.index = fp->index;
 	params.ramrod_params.cid = fp->cid;
 
+#ifdef BCM_CNIC
+	if (IS_FCOE_FP(fp))
+		params.ramrod_params.flags |= CLIENT_IS_FCOE;
+
+#endif
+
 	if (is_leading)
 		params.ramrod_params.flags |= CLIENT_IS_LEADING_RSS;
 
@@ -6710,7 +6991,7 @@ static void bnx2x_reset_func(struct bnx2x *bp)
 	REG_WR8(bp, BAR_USTRORM_INTMEM + USTORM_FUNC_EN_OFFSET(func), 0);
 
 	/* FP SBs */
-	for_each_queue(bp, i) {
+	for_each_eth_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 		REG_WR8(bp,
 			BAR_CSTRORM_INTMEM +
@@ -6830,6 +7111,20 @@ static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code)
 	}
 }
 
+#ifdef BCM_CNIC
+static inline void bnx2x_del_fcoe_eth_macs(struct bnx2x *bp)
+{
+	if (bp->flags & FCOE_MACS_SET) {
+		if (!IS_MF_SD(bp))
+			bnx2x_set_fip_eth_mac_addr(bp, 0);
+
+		bnx2x_set_all_enode_macs(bp, 0);
+
+		bp->flags &= ~FCOE_MACS_SET;
+	}
+}
+#endif
+
 void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode)
 {
 	int port = BP_PORT(bp);
@@ -6837,7 +7132,7 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode)
 	int i, cnt, rc;
 
 	/* Wait until tx fastpath tasks complete */
-	for_each_queue(bp, i) {
+	for_each_tx_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
 		cnt = 1000;
@@ -6877,13 +7172,7 @@ void bnx2x_chip_cleanup(struct bnx2x *bp, int unload_mode)
 	}
 
 #ifdef BCM_CNIC
-	/* Clear iSCSI L2 MAC */
-	mutex_lock(&bp->cnic_mutex);
-	if (bp->cnic_flags & BNX2X_CNIC_FLAG_MAC_SET) {
-		bnx2x_set_iscsi_eth_mac_addr(bp, 0);
-		bp->cnic_flags &= ~BNX2X_CNIC_FLAG_MAC_SET;
-	}
-	mutex_unlock(&bp->cnic_mutex);
+	bnx2x_del_fcoe_eth_macs(bp);
 #endif
 
 	if (unload_mode == UNLOAD_NORMAL)
@@ -7736,7 +8025,7 @@ static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp)
 	bp->igu_sb_cnt = 0;
 	if (CHIP_INT_MODE_IS_BC(bp)) {
 		bp->igu_sb_cnt = min_t(u8, FP_SB_MAX_E1x,
-				       bp->l2_cid_count);
+				       NUM_IGU_SB_REQUIRED(bp->l2_cid_count));
 
 		bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) *
 			FP_SB_MAX_E1x;
@@ -7767,7 +8056,8 @@ static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp)
 			}
 		}
 	}
-	bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt, bp->l2_cid_count);
+	bp->igu_sb_cnt = min_t(u8, bp->igu_sb_cnt,
+				   NUM_IGU_SB_REQUIRED(bp->l2_cid_count));
 	if (bp->igu_sb_cnt == 0)
 		BNX2X_ERR("CAM configuration error\n");
 }
@@ -8076,9 +8366,8 @@ static void __devinit bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi)
 static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
-	u32 val, val2;
 	u32 config;
-	u32 ext_phy_type, ext_phy_config;;
+	u32 ext_phy_type, ext_phy_config;
 
 	bp->link_params.bp = bp;
 	bp->link_params.port = port;
@@ -8135,25 +8424,73 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
 		 (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN))
 		bp->mdio.prtad =
 			XGXS_EXT_PHY_ADDR(ext_phy_config);
+}
+
+static void __devinit bnx2x_get_mac_hwinfo(struct bnx2x *bp)
+{
+	u32 val, val2;
+	int func = BP_ABS_FUNC(bp);
+	int port = BP_PORT(bp);
+
+	if (BP_NOMCP(bp)) {
+		BNX2X_ERROR("warning: random MAC workaround active\n");
+		random_ether_addr(bp->dev->dev_addr);
+	} else if (IS_MF(bp)) {
+		val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper);
+		val = MF_CFG_RD(bp, func_mf_config[func].mac_lower);
+		if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) &&
+		    (val != FUNC_MF_CFG_LOWERMAC_DEFAULT))
+			bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
+
+#ifdef BCM_CNIC
+		/* iSCSI NPAR MAC */
+		if (IS_MF_SI(bp)) {
+			u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg);
+			if (cfg & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD) {
+				val2 = MF_CFG_RD(bp, func_ext_config[func].
+						     iscsi_mac_addr_upper);
+				val = MF_CFG_RD(bp, func_ext_config[func].
+						    iscsi_mac_addr_lower);
+				bnx2x_set_mac_buf(bp->iscsi_mac, val, val2);
+			}
+		}
+#endif
+	} else {
+		/* in SF read MACs from port configuration */
+		val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
+		val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
+		bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
+
+#ifdef BCM_CNIC
+		val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].
+				    iscsi_mac_upper);
+		val = SHMEM_RD(bp, dev_info.port_hw_config[port].
+				   iscsi_mac_lower);
+		bnx2x_set_mac_buf(bp->iscsi_mac, val, val2);
+#endif
+	}
 
-	val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
-	val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
-	bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
 	memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN);
 	memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
 
 #ifdef BCM_CNIC
-	val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].iscsi_mac_upper);
-	val = SHMEM_RD(bp, dev_info.port_hw_config[port].iscsi_mac_lower);
-	bnx2x_set_mac_buf(bp->iscsi_mac, val, val2);
+	/* Inform the upper layers about FCoE MAC */
+	if (!CHIP_IS_E1x(bp)) {
+		if (IS_MF_SD(bp))
+			memcpy(bp->fip_mac, bp->dev->dev_addr,
+			       sizeof(bp->fip_mac));
+		else
+			memcpy(bp->fip_mac, bp->iscsi_mac,
+			       sizeof(bp->fip_mac));
+	}
 #endif
 }
 
 static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 {
-	int func = BP_ABS_FUNC(bp);
-	int vn;
-	u32 val, val2;
+	int /*abs*/func = BP_ABS_FUNC(bp);
+	int vn, port;
+	u32 val = 0;
 	int rc = 0;
 
 	bnx2x_get_common_hwinfo(bp);
@@ -8163,7 +8500,8 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 
 		bp->igu_dsb_id = DEF_SB_IGU_ID;
 		bp->igu_base_sb = 0;
-		bp->igu_sb_cnt = min_t(u8, FP_SB_MAX_E1x, bp->l2_cid_count);
+		bp->igu_sb_cnt = min_t(u8, FP_SB_MAX_E1x,
+				       NUM_IGU_SB_REQUIRED(bp->l2_cid_count));
 	} else {
 		bp->common.int_block = INT_BLOCK_IGU;
 		val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
@@ -8186,44 +8524,99 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 	bp->mf_ov = 0;
 	bp->mf_mode = 0;
 	vn = BP_E1HVN(bp);
+	port = BP_PORT(bp);
+
 	if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
+		DP(NETIF_MSG_PROBE,
+			    "shmem2base 0x%x, size %d, mfcfg offset %d\n",
+			    bp->common.shmem2_base, SHMEM2_RD(bp, size),
+			    (u32)offsetof(struct shmem2_region, mf_cfg_addr));
 		if (SHMEM2_HAS(bp, mf_cfg_addr))
 			bp->common.mf_cfg_base = SHMEM2_RD(bp, mf_cfg_addr);
 		else
 			bp->common.mf_cfg_base = bp->common.shmem_base +
 				offsetof(struct shmem_region, func_mb) +
 				E1H_FUNC_MAX * sizeof(struct drv_func_mb);
-		bp->mf_config[vn] =
-			MF_CFG_RD(bp, func_mf_config[func].config);
+		/*
+		 * get mf configuration:
+		 * 1. existance of MF configuration
+		 * 2. MAC address must be legal (check only upper bytes)
+		 *    for  Switch-Independent mode;
+		 *    OVLAN must be legal for Switch-Dependent mode
+		 * 3. SF_MODE configures specific MF mode
+		 */
+		if (bp->common.mf_cfg_base != SHMEM_MF_CFG_ADDR_NONE) {
+			/* get mf configuration */
+			val = SHMEM_RD(bp,
+				       dev_info.shared_feature_config.config);
+			val &= SHARED_FEAT_CFG_FORCE_SF_MODE_MASK;
+
+			switch (val) {
+			case SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT:
+				val = MF_CFG_RD(bp, func_mf_config[func].
+						mac_upper);
+				/* check for legal mac (upper bytes)*/
+				if (val != 0xffff) {
+					bp->mf_mode = MULTI_FUNCTION_SI;
+					bp->mf_config[vn] = MF_CFG_RD(bp,
+						   func_mf_config[func].config);
+				} else
+					DP(NETIF_MSG_PROBE, "illegal MAC "
+							    "address for SI\n");
+				break;
+			case SHARED_FEAT_CFG_FORCE_SF_MODE_MF_ALLOWED:
+				/* get OV configuration */
+				val = MF_CFG_RD(bp,
+					func_mf_config[FUNC_0].e1hov_tag);
+				val &= FUNC_MF_CFG_E1HOV_TAG_MASK;
+
+				if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
+					bp->mf_mode = MULTI_FUNCTION_SD;
+					bp->mf_config[vn] = MF_CFG_RD(bp,
+						func_mf_config[func].config);
+				} else
+					DP(NETIF_MSG_PROBE, "illegal OV for "
+							    "SD\n");
+				break;
+			default:
+				/* Unknown configuration: reset mf_config */
+				bp->mf_config[vn] = 0;
+				DP(NETIF_MSG_PROBE, "Unkown MF mode 0x%x\n",
+				   val);
+			}
+		}
 
-		val = (MF_CFG_RD(bp, func_mf_config[FUNC_0].e1hov_tag) &
-		       FUNC_MF_CFG_E1HOV_TAG_MASK);
-		if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT)
-			bp->mf_mode = 1;
 		BNX2X_DEV_INFO("%s function mode\n",
 			       IS_MF(bp) ? "multi" : "single");
 
-		if (IS_MF(bp)) {
-			val = (MF_CFG_RD(bp, func_mf_config[func].
-								e1hov_tag) &
-			       FUNC_MF_CFG_E1HOV_TAG_MASK);
+		switch (bp->mf_mode) {
+		case MULTI_FUNCTION_SD:
+			val = MF_CFG_RD(bp, func_mf_config[func].e1hov_tag) &
+			      FUNC_MF_CFG_E1HOV_TAG_MASK;
 			if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
 				bp->mf_ov = val;
-				BNX2X_DEV_INFO("MF OV for func %d is %d "
-					       "(0x%04x)\n",
-					       func, bp->mf_ov, bp->mf_ov);
+				BNX2X_DEV_INFO("MF OV for func %d is %d"
+					       " (0x%04x)\n", func,
+					       bp->mf_ov, bp->mf_ov);
 			} else {
-				BNX2X_ERROR("No valid MF OV for func %d,"
-					    "  aborting\n", func);
+				BNX2X_ERR("No valid MF OV for func %d,"
+					  "  aborting\n", func);
 				rc = -EPERM;
 			}
-		} else {
-			if (BP_VN(bp)) {
-				BNX2X_ERROR("VN %d in single function mode,"
-					    "  aborting\n", BP_E1HVN(bp));
+			break;
+		case MULTI_FUNCTION_SI:
+			BNX2X_DEV_INFO("func %d is in MF "
+				       "switch-independent mode\n", func);
+			break;
+		default:
+			if (vn) {
+				BNX2X_ERR("VN %d in single function mode,"
+					  "  aborting\n", vn);
 				rc = -EPERM;
 			}
+			break;
 		}
+
 	}
 
 	/* adjust igu_sb_cnt to MF for E1x */
@@ -8248,32 +8641,8 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
 		BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
 	}
 
-	if (IS_MF(bp)) {
-		val2 = MF_CFG_RD(bp, func_mf_config[func].mac_upper);
-		val = MF_CFG_RD(bp,  func_mf_config[func].mac_lower);
-		if ((val2 != FUNC_MF_CFG_UPPERMAC_DEFAULT) &&
-		    (val != FUNC_MF_CFG_LOWERMAC_DEFAULT)) {
-			bp->dev->dev_addr[0] = (u8)(val2 >> 8 & 0xff);
-			bp->dev->dev_addr[1] = (u8)(val2 & 0xff);
-			bp->dev->dev_addr[2] = (u8)(val >> 24 & 0xff);
-			bp->dev->dev_addr[3] = (u8)(val >> 16 & 0xff);
-			bp->dev->dev_addr[4] = (u8)(val >> 8  & 0xff);
-			bp->dev->dev_addr[5] = (u8)(val & 0xff);
-			memcpy(bp->link_params.mac_addr, bp->dev->dev_addr,
-			       ETH_ALEN);
-			memcpy(bp->dev->perm_addr, bp->dev->dev_addr,
-			       ETH_ALEN);
-		}
-
-		return rc;
-	}
-
-	if (BP_NOMCP(bp)) {
-		/* only supposed to happen on emulation/FPGA */
-		BNX2X_ERROR("warning: random MAC workaround active\n");
-		random_ether_addr(bp->dev->dev_addr);
-		memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
-	}
+	/* Get MAC addresses */
+	bnx2x_get_mac_hwinfo(bp);
 
 	return rc;
 }
@@ -8427,6 +8796,9 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 	bp->timer.data = (unsigned long) bp;
 	bp->timer.function = bnx2x_timer;
 
+	bnx2x_dcbx_set_state(bp, true, BNX2X_DCBX_ENABLED_ON_NEG_ON);
+	bnx2x_dcbx_init_params(bp);
+
 	return rc;
 }
 
@@ -8629,6 +9001,7 @@ static const struct net_device_ops bnx2x_netdev_ops = {
 	.ndo_open		= bnx2x_open,
 	.ndo_stop		= bnx2x_close,
 	.ndo_start_xmit		= bnx2x_start_xmit,
+	.ndo_select_queue	= bnx2x_select_queue,
 	.ndo_set_multicast_list	= bnx2x_set_rx_mode,
 	.ndo_set_mac_address	= bnx2x_change_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
@@ -8761,7 +9134,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 	dev->netdev_ops = &bnx2x_netdev_ops;
 	bnx2x_set_ethtool_ops(dev);
 	dev->features |= NETIF_F_SG;
-	dev->features |= NETIF_F_HW_CSUM;
+	dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	if (bp->flags & USING_DAC_FLAG)
 		dev->features |= NETIF_F_HIGHDMA;
 	dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
@@ -8769,12 +9142,16 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 	dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
 
 	dev->vlan_features |= NETIF_F_SG;
-	dev->vlan_features |= NETIF_F_HW_CSUM;
+	dev->vlan_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	if (bp->flags & USING_DAC_FLAG)
 		dev->vlan_features |= NETIF_F_HIGHDMA;
 	dev->vlan_features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
 	dev->vlan_features |= NETIF_F_TSO6;
 
+#ifdef BCM_DCB
+	dev->dcbnl_ops = &bnx2x_dcbnl_ops;
+#endif
+
 	/* get_port_hwinfo() will set prtad and mmds properly */
 	bp->mdio.prtad = MDIO_PRTAD_NONE;
 	bp->mdio.mmds = 0;
@@ -9064,10 +9441,10 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	default:
 		pr_err("Unknown board_type (%ld), aborting\n",
 			   ent->driver_data);
-		return ENODEV;
+		return -ENODEV;
 	}
 
-	cid_count += CNIC_CONTEXT_USE;
+	cid_count += NONE_ETH_CONTEXT_USE + CNIC_CONTEXT_USE;
 
 	/* dev zeroed in init_etherdev */
 	dev = alloc_etherdev_mq(sizeof(*bp), cid_count);
@@ -9096,11 +9473,12 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	/* calc qm_cid_count */
 	bp->qm_cid_count = bnx2x_set_qm_cid_count(bp, cid_count);
 
-	rc = register_netdev(dev);
-	if (rc) {
-		dev_err(&pdev->dev, "Cannot register net device\n");
-		goto init_one_exit;
-	}
+#ifdef BCM_CNIC
+	/* disable FCOE L2 queue for E1x*/
+	if (CHIP_IS_E1x(bp))
+		bp->flags |= NO_FCOE_FLAG;
+
+#endif
 
 	/* Configure interupt mode: try to enable MSI-X/MSI if
 	 * needed, set bp->num_queues appropriately.
@@ -9110,6 +9488,21 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	/* Add all NAPI objects */
 	bnx2x_add_all_napi(bp);
 
+	rc = register_netdev(dev);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot register net device\n");
+		goto init_one_exit;
+	}
+
+#ifdef BCM_CNIC
+	if (!NO_FCOE(bp)) {
+		/* Add storage MAC address */
+		rtnl_lock();
+		dev_addr_add(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
+		rtnl_unlock();
+	}
+#endif
+
 	bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
 
 	netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx,"
@@ -9153,6 +9546,15 @@ static void __devexit bnx2x_remove_one(struct pci_dev *pdev)
 	}
 	bp = netdev_priv(dev);
 
+#ifdef BCM_CNIC
+	/* Delete storage MAC address */
+	if (!NO_FCOE(bp)) {
+		rtnl_lock();
+		dev_addr_del(bp->dev, bp->fip_mac, NETDEV_HW_ADDR_T_SAN);
+		rtnl_unlock();
+	}
+#endif
+
 	unregister_netdev(dev);
 
 	/* Delete all NAPI objects */
@@ -9202,7 +9604,7 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
 
-	for_each_queue(bp, i)
+	for_each_rx_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
 
 	bnx2x_free_mem(bp);
@@ -9429,7 +9831,8 @@ static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count)
 				break;
 			else
 				atomic_dec(&bp->spq_left);
-		} else if (type == ISCSI_CONNECTION_TYPE) {
+		} else if ((type == ISCSI_CONNECTION_TYPE) ||
+			   (type == FCOE_CONNECTION_TYPE)) {
 			if (bp->cnic_spq_pending >=
 			    bp->cnic_eth_dev.max_kwqe_pending)
 				break;
@@ -9576,6 +9979,9 @@ static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
 	case DRV_CTL_START_L2_CMD: {
 		u32 cli = ctl->data.ring.client_id;
 
+		/* Clear FCoE FIP and ALL ENODE MACs addresses first */
+		bnx2x_del_fcoe_eth_macs(bp);
+
 		/* Set iSCSI MAC address */
 		bnx2x_set_iscsi_eth_mac_addr(bp, 1);
 
@@ -9697,10 +10103,6 @@ static int bnx2x_unregister_cnic(struct net_device *dev)
 	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
 
 	mutex_lock(&bp->cnic_mutex);
-	if (bp->cnic_flags & BNX2X_CNIC_FLAG_MAC_SET) {
-		bp->cnic_flags &= ~BNX2X_CNIC_FLAG_MAC_SET;
-		bnx2x_set_iscsi_eth_mac_addr(bp, 0);
-	}
 	cp->drv_state = 0;
 	rcu_assign_pointer(bp->cnic_ops, NULL);
 	mutex_unlock(&bp->cnic_mutex);
@@ -9731,7 +10133,9 @@ struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev)
 	cp->drv_ctl = bnx2x_drv_ctl;
 	cp->drv_register_cnic = bnx2x_register_cnic;
 	cp->drv_unregister_cnic = bnx2x_unregister_cnic;
-	cp->iscsi_l2_client_id = BNX2X_ISCSI_ETH_CL_ID;
+	cp->fcoe_init_cid = BNX2X_FCOE_ETH_CID;
+	cp->iscsi_l2_client_id = BNX2X_ISCSI_ETH_CL_ID +
+		BP_E1HVN(bp) * NONE_ETH_CONTEXT_USE;
 	cp->iscsi_l2_cid = BNX2X_ISCSI_ETH_CID;
 
 	DP(BNX2X_MSG_SP, "page_size %d, tbl_offset %d, tbl_lines %d, "
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 1cefe489a95..bfd875b7290 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -1615,6 +1615,8 @@
 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN	 (0x1<<4)
 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST	 (0x1<<2)
 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN	 (0x1<<3)
+#define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN			 (0x1<<0)
+#define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN			 (0x1<<0)
 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT	 (0x1<<0)
 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS	 (0x1<<9)
 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G 	 (0x1<<15)
@@ -1744,12 +1746,16 @@
    ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
    port */
 #define NIG_REG_LLFC_ENABLE_0					 0x16208
+#define NIG_REG_LLFC_ENABLE_1					 0x1620c
 /* [RW 16] classes are high-priority for port0 */
 #define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0			 0x16058
+#define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1			 0x1605c
 /* [RW 16] classes are low-priority for port0 */
 #define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0			 0x16060
+#define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1			 0x16064
 /* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
 #define NIG_REG_LLFC_OUT_EN_0					 0x160c8
+#define NIG_REG_LLFC_OUT_EN_1					 0x160cc
 #define NIG_REG_LLH0_ACPI_PAT_0_CRC				 0x1015c
 #define NIG_REG_LLH0_ACPI_PAT_6_LEN				 0x10154
 #define NIG_REG_LLH0_BRB1_DRV_MASK				 0x10244
@@ -1774,6 +1780,8 @@
 /* [RW 8] event id for llh0 */
 #define NIG_REG_LLH0_EVENT_ID					 0x10084
 #define NIG_REG_LLH0_FUNC_EN					 0x160fc
+#define NIG_REG_LLH0_FUNC_MEM					 0x16180
+#define NIG_REG_LLH0_FUNC_MEM_ENABLE				 0x16140
 #define NIG_REG_LLH0_FUNC_VLAN_ID				 0x16100
 /* [RW 1] Determine the IP version to look for in
    ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */
@@ -1797,6 +1805,9 @@
 #define NIG_REG_LLH1_ERROR_MASK 				 0x10090
 /* [RW 8] event id for llh1 */
 #define NIG_REG_LLH1_EVENT_ID					 0x10088
+#define NIG_REG_LLH1_FUNC_MEM					 0x161c0
+#define NIG_REG_LLH1_FUNC_MEM_ENABLE				 0x16160
+#define NIG_REG_LLH1_FUNC_MEM_SIZE				 16
 /* [RW 8] init credit counter for port1 in LLH */
 #define NIG_REG_LLH1_XCM_INIT_CREDIT				 0x10564
 #define NIG_REG_LLH1_XCM_MASK					 0x10134
@@ -1907,11 +1918,17 @@
    ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
    port */
 #define NIG_REG_PAUSE_ENABLE_0					 0x160c0
+#define NIG_REG_PAUSE_ENABLE_1					 0x160c4
 /* [RW 1] Input enable for RX PBF LP IF */
 #define NIG_REG_PBF_LB_IN_EN					 0x100b4
 /* [RW 1] Value of this register will be transmitted to port swap when
    ~nig_registers_strap_override.strap_override =1 */
 #define NIG_REG_PORT_SWAP					 0x10394
+/* [RW 1] PPP enable for port0. This register may get 1 only when
+ * ~safc_enable.safc_enable = 0 and pause_enable.pause_enable =0 for the
+ * same port */
+#define NIG_REG_PPP_ENABLE_0					 0x160b0
+#define NIG_REG_PPP_ENABLE_1					 0x160b4
 /* [RW 1] output enable for RX parser descriptor IF */
 #define NIG_REG_PRS_EOP_OUT_EN					 0x10104
 /* [RW 1] Input enable for RX parser request IF */
@@ -1978,6 +1995,14 @@
 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G	 (0x1<<15)
 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS  (0xf<<18)
 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
+/* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter. */
+#define PBF_REG_COS0_UPPER_BOUND				 0x15c05c
+/* [RW 31] The weight of COS0 in the ETS command arbiter. */
+#define PBF_REG_COS0_WEIGHT					 0x15c054
+/* [RW 31] The upper bound of the weight of COS1 in the ETS command arbiter. */
+#define PBF_REG_COS1_UPPER_BOUND				 0x15c060
+/* [RW 31] The weight of COS1 in the ETS command arbiter. */
+#define PBF_REG_COS1_WEIGHT					 0x15c058
 /* [RW 1] Disable processing further tasks from port 0 (after ending the
    current task in process). */
 #define PBF_REG_DISABLE_NEW_TASK_PROC_P0			 0x14005c
@@ -1988,9 +2013,16 @@
    current task in process). */
 #define PBF_REG_DISABLE_NEW_TASK_PROC_P4			 0x14006c
 #define PBF_REG_DISABLE_PF					 0x1402e8
+/* [RW 1] Indicates that ETS is performed between the COSes in the command
+ * arbiter. If reset strict priority w/ anti-starvation will be performed
+ * w/o WFQ. */
+#define PBF_REG_ETS_ENABLED					 0x15c050
 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
  * Ethernet header. */
 #define PBF_REG_HDRS_AFTER_BASIC				 0x15c0a8
+/* [RW 1] Indicates which COS is conncted to the highest priority in the
+ * command arbiter. */
+#define PBF_REG_HIGH_PRIORITY_COS_NUM				 0x15c04c
 #define PBF_REG_IF_ENABLE_REG					 0x140044
 /* [RW 1] Init bit. When set the initial credits are copied to the credit
    registers (except the port credits). Should be set and then reset after
@@ -2016,6 +2048,10 @@
 #define PBF_REG_MAC_LB_ENABLE					 0x140040
 /* [RW 6] Bit-map indicating which headers must appear in the packet */
 #define PBF_REG_MUST_HAVE_HDRS					 0x15c0c4
+/* [RW 16] The number of strict priority arbitration slots between 2 RR
+ * arbitration slots. A value of 0 means no strict priority cycles; i.e. the
+ * strict-priority w/ anti-starvation arbiter is a RR arbiter. */
+#define PBF_REG_NUM_STRICT_ARB_SLOTS				 0x15c064
 /* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause
    not suppoterd. */
 #define PBF_REG_P0_ARB_THRSH					 0x1400e4
@@ -4970,7 +5006,23 @@
 #define EMAC_REG_EMAC_TX_MODE					 0xbc
 #define EMAC_REG_EMAC_TX_STAT_AC				 0x280
 #define EMAC_REG_EMAC_TX_STAT_AC_COUNT				 22
+#define EMAC_REG_RX_PFC_MODE					 0x320
+#define EMAC_REG_RX_PFC_MODE_PRIORITIES				 (1L<<2)
+#define EMAC_REG_RX_PFC_MODE_RX_EN				 (1L<<1)
+#define EMAC_REG_RX_PFC_MODE_TX_EN				 (1L<<0)
+#define EMAC_REG_RX_PFC_PARAM					 0x324
+#define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT			 0
+#define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT		 16
+#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD				 0x328
+#define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT			 (0xffff<<0)
+#define EMAC_REG_RX_PFC_STATS_XOFF_SENT				 0x330
+#define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT			 (0xffff<<0)
+#define EMAC_REG_RX_PFC_STATS_XON_RCVD				 0x32c
+#define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT			 (0xffff<<0)
+#define EMAC_REG_RX_PFC_STATS_XON_SENT				 0x334
+#define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT			 (0xffff<<0)
 #define EMAC_RX_MODE_FLOW_EN					 (1L<<2)
+#define EMAC_RX_MODE_KEEP_MAC_CONTROL				 (1L<<3)
 #define EMAC_RX_MODE_KEEP_VLAN_TAG				 (1L<<10)
 #define EMAC_RX_MODE_PROMISCUOUS				 (1L<<8)
 #define EMAC_RX_MODE_RESET					 (1L<<0)
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c
index 4733c835dad..6e4d9b144cc 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/bnx2x/bnx2x_stats.c
@@ -160,7 +160,7 @@ static void bnx2x_storm_stats_post(struct bnx2x *bp)
 
 		ramrod_data.drv_counter = bp->stats_counter++;
 		ramrod_data.collect_port = bp->port.pmf ? 1 : 0;
-		for_each_queue(bp, i)
+		for_each_eth_queue(bp, i)
 			ramrod_data.ctr_id_vector |= (1 << bp->fp[i].cl_id);
 
 		rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_COMMON_STAT_QUERY, 0,
@@ -766,7 +766,7 @@ static int bnx2x_storm_stats_update(struct bnx2x *bp)
 	estats->no_buff_discard_hi = 0;
 	estats->no_buff_discard_lo = 0;
 
-	for_each_queue(bp, i) {
+	for_each_eth_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 		int cl_id = fp->cl_id;
 		struct tstorm_per_client_stats *tclient =
@@ -996,7 +996,7 @@ static void bnx2x_net_stats_update(struct bnx2x *bp)
 	nstats->tx_bytes = bnx2x_hilo(&estats->total_bytes_transmitted_hi);
 
 	tmp = estats->mac_discard;
-	for_each_queue(bp, i)
+	for_each_rx_queue(bp, i)
 		tmp += le32_to_cpu(bp->fp[i].old_tclient.checksum_discard);
 	nstats->rx_dropped = tmp;
 
@@ -1087,7 +1087,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 		       bp->dev->name,
 		       estats->brb_drop_lo, estats->brb_truncate_lo);
 
-		for_each_queue(bp, i) {
+		for_each_eth_queue(bp, i) {
 			struct bnx2x_fastpath *fp = &bp->fp[i];
 			struct bnx2x_eth_q_stats *qstats = &fp->eth_q_stats;
 
@@ -1101,7 +1101,7 @@ static void bnx2x_stats_update(struct bnx2x *bp)
 			       fp->rx_calls, fp->rx_pkt);
 		}
 
-		for_each_queue(bp, i) {
+		for_each_eth_queue(bp, i) {
 			struct bnx2x_fastpath *fp = &bp->fp[i];
 			struct bnx2x_eth_q_stats *qstats = &fp->eth_q_stats;
 			struct netdev_queue *txq =
@@ -1381,7 +1381,8 @@ void bnx2x_stats_init(struct bnx2x *bp)
 		memset(&fp->eth_q_stats, 0, sizeof(struct bnx2x_eth_q_stats));
 	}
 
-	for_each_queue(bp, i) {
+	/* FW stats are currently collected for ETH clients only */
+	for_each_eth_queue(bp, i) {
 		/* Set initial stats counter in the stats ramrod data to -1 */
 		int cl_id = bp->fp[i].cl_id;
 
diff --git a/drivers/net/bnx2x/bnx2x_stats.h b/drivers/net/bnx2x/bnx2x_stats.h
index afd15efa429..596798c4745 100644
--- a/drivers/net/bnx2x/bnx2x_stats.h
+++ b/drivers/net/bnx2x/bnx2x_stats.h
@@ -53,7 +53,6 @@ struct bnx2x_eth_q_stats {
 	u32 hw_csum_err;
 };
 
-#define BNX2X_NUM_Q_STATS		13
 #define Q_STATS_OFFSET32(stat_name) \
 			(offsetof(struct bnx2x_eth_q_stats, stat_name) / 4)
 
@@ -225,7 +224,6 @@ struct bnx2x_eth_stats {
 	u32 nig_timer_max;
 };
 
-#define BNX2X_NUM_STATS			43
 #define STATS_OFFSET32(stat_name) \
 			(offsetof(struct bnx2x_eth_stats, stat_name) / 4)
 
diff --git a/drivers/net/bonding/Makefile b/drivers/net/bonding/Makefile
index 6f9c6faef24..0e2737eac8b 100644
--- a/drivers/net/bonding/Makefile
+++ b/drivers/net/bonding/Makefile
@@ -4,7 +4,7 @@
 
 obj-$(CONFIG_BONDING) += bonding.o
 
-bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o
+bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o bond_debugfs.o
 
 ipv6-$(subst m,y,$(CONFIG_IPV6)) += bond_ipv6.o
 bonding-objs += $(ipv6-y)
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 881914bc4e9..48cf24ff4e6 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2474,8 +2474,7 @@ int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct pac
 		goto out;
 
 	read_lock(&bond->lock);
-	slave = bond_get_slave_by_dev((struct bonding *)netdev_priv(dev),
-					orig_dev);
+	slave = bond_get_slave_by_dev(netdev_priv(dev), orig_dev);
 	if (!slave)
 		goto out_unlock;
 
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 26bb118c453..f4e638c6512 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -44,42 +44,6 @@
 #include "bond_alb.h"
 
 
-#define ALB_TIMER_TICKS_PER_SEC	    10	/* should be a divisor of HZ */
-#define BOND_TLB_REBALANCE_INTERVAL 10	/* In seconds, periodic re-balancing.
-					 * Used for division - never set
-					 * to zero !!!
-					 */
-#define BOND_ALB_LP_INTERVAL	    1	/* In seconds, periodic send of
-					 * learning packets to the switch
-					 */
-
-#define BOND_TLB_REBALANCE_TICKS (BOND_TLB_REBALANCE_INTERVAL \
-				  * ALB_TIMER_TICKS_PER_SEC)
-
-#define BOND_ALB_LP_TICKS (BOND_ALB_LP_INTERVAL \
-			   * ALB_TIMER_TICKS_PER_SEC)
-
-#define TLB_HASH_TABLE_SIZE 256	/* The size of the clients hash table.
-				 * Note that this value MUST NOT be smaller
-				 * because the key hash table is BYTE wide !
-				 */
-
-
-#define TLB_NULL_INDEX		0xffffffff
-#define MAX_LP_BURST		3
-
-/* rlb defs */
-#define RLB_HASH_TABLE_SIZE	256
-#define RLB_NULL_INDEX		0xffffffff
-#define RLB_UPDATE_DELAY	2*ALB_TIMER_TICKS_PER_SEC /* 2 seconds */
-#define RLB_ARP_BURST_SIZE	2
-#define RLB_UPDATE_RETRY	3	/* 3-ticks - must be smaller than the rlb
-					 * rebalance interval (5 min).
-					 */
-/* RLB_PROMISC_TIMEOUT = 10 sec equals the time that the current slave is
- * promiscuous after failover
- */
-#define RLB_PROMISC_TIMEOUT	10*ALB_TIMER_TICKS_PER_SEC
 
 #ifndef __long_aligned
 #define __long_aligned __attribute__((aligned((sizeof(long)))))
diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h
index 50968f8196c..118c28aa471 100644
--- a/drivers/net/bonding/bond_alb.h
+++ b/drivers/net/bonding/bond_alb.h
@@ -31,6 +31,44 @@ struct slave;
 #define BOND_ALB_INFO(bond)   ((bond)->alb_info)
 #define SLAVE_TLB_INFO(slave) ((slave)->tlb_info)
 
+#define ALB_TIMER_TICKS_PER_SEC	    10	/* should be a divisor of HZ */
+#define BOND_TLB_REBALANCE_INTERVAL 10	/* In seconds, periodic re-balancing.
+					 * Used for division - never set
+					 * to zero !!!
+					 */
+#define BOND_ALB_LP_INTERVAL	    1	/* In seconds, periodic send of
+					 * learning packets to the switch
+					 */
+
+#define BOND_TLB_REBALANCE_TICKS (BOND_TLB_REBALANCE_INTERVAL \
+				  * ALB_TIMER_TICKS_PER_SEC)
+
+#define BOND_ALB_LP_TICKS (BOND_ALB_LP_INTERVAL \
+			   * ALB_TIMER_TICKS_PER_SEC)
+
+#define TLB_HASH_TABLE_SIZE 256	/* The size of the clients hash table.
+				 * Note that this value MUST NOT be smaller
+				 * because the key hash table is BYTE wide !
+				 */
+
+
+#define TLB_NULL_INDEX		0xffffffff
+#define MAX_LP_BURST		3
+
+/* rlb defs */
+#define RLB_HASH_TABLE_SIZE	256
+#define RLB_NULL_INDEX		0xffffffff
+#define RLB_UPDATE_DELAY	(2*ALB_TIMER_TICKS_PER_SEC) /* 2 seconds */
+#define RLB_ARP_BURST_SIZE	2
+#define RLB_UPDATE_RETRY	3 /* 3-ticks - must be smaller than the rlb
+				   * rebalance interval (5 min).
+				   */
+/* RLB_PROMISC_TIMEOUT = 10 sec equals the time that the current slave is
+ * promiscuous after failover
+ */
+#define RLB_PROMISC_TIMEOUT	(10*ALB_TIMER_TICKS_PER_SEC)
+
+
 struct tlb_client_info {
 	struct slave *tx_slave;	/* A pointer to slave used for transmiting
 				 * packets to a Client that the Hash function
diff --git a/drivers/net/bonding/bond_debugfs.c b/drivers/net/bonding/bond_debugfs.c
new file mode 100644
index 00000000000..3680aa251de
--- /dev/null
+++ b/drivers/net/bonding/bond_debugfs.c
@@ -0,0 +1,146 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+
+#include "bonding.h"
+#include "bond_alb.h"
+
+#ifdef CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static struct dentry *bonding_debug_root;
+
+/*
+ *  Show RLB hash table
+ */
+static int bond_debug_rlb_hash_show(struct seq_file *m, void *v)
+{
+	struct bonding *bond = m->private;
+	struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
+	struct rlb_client_info *client_info;
+	u32 hash_index;
+
+	if (bond->params.mode != BOND_MODE_ALB)
+		return 0;
+
+	seq_printf(m, "SourceIP        DestinationIP   "
+			"Destination MAC   DEV\n");
+
+	spin_lock_bh(&(BOND_ALB_INFO(bond).rx_hashtbl_lock));
+
+	hash_index = bond_info->rx_hashtbl_head;
+	for (; hash_index != RLB_NULL_INDEX; hash_index = client_info->next) {
+		client_info = &(bond_info->rx_hashtbl[hash_index]);
+		seq_printf(m, "%-15pI4 %-15pI4 %-17pM %s\n",
+			&client_info->ip_src,
+			&client_info->ip_dst,
+			&client_info->mac_dst,
+			client_info->slave->dev->name);
+	}
+
+	spin_unlock_bh(&(BOND_ALB_INFO(bond).rx_hashtbl_lock));
+
+	return 0;
+}
+
+static int bond_debug_rlb_hash_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, bond_debug_rlb_hash_show, inode->i_private);
+}
+
+static const struct file_operations bond_debug_rlb_hash_fops = {
+	.owner		= THIS_MODULE,
+	.open		= bond_debug_rlb_hash_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+void bond_debug_register(struct bonding *bond)
+{
+	if (!bonding_debug_root)
+		return;
+
+	bond->debug_dir =
+		debugfs_create_dir(bond->dev->name, bonding_debug_root);
+
+	if (!bond->debug_dir) {
+		pr_warning("%s: Warning: failed to register to debugfs\n",
+			bond->dev->name);
+		return;
+	}
+
+	debugfs_create_file("rlb_hash_table", 0400, bond->debug_dir,
+				bond, &bond_debug_rlb_hash_fops);
+}
+
+void bond_debug_unregister(struct bonding *bond)
+{
+	if (!bonding_debug_root)
+		return;
+
+	debugfs_remove_recursive(bond->debug_dir);
+}
+
+void bond_debug_reregister(struct bonding *bond)
+{
+	struct dentry *d;
+
+	if (!bonding_debug_root)
+		return;
+
+	d = debugfs_rename(bonding_debug_root, bond->debug_dir,
+			   bonding_debug_root, bond->dev->name);
+	if (d) {
+		bond->debug_dir = d;
+	} else {
+		pr_warning("%s: Warning: failed to reregister, "
+				"so just unregister old one\n",
+				bond->dev->name);
+		bond_debug_unregister(bond);
+	}
+}
+
+void bond_create_debugfs(void)
+{
+	bonding_debug_root = debugfs_create_dir("bonding", NULL);
+
+	if (!bonding_debug_root) {
+		pr_warning("Warning: Cannot create bonding directory"
+				" in debugfs\n");
+	}
+}
+
+void bond_destroy_debugfs(void)
+{
+	debugfs_remove_recursive(bonding_debug_root);
+	bonding_debug_root = NULL;
+}
+
+
+#else /* !CONFIG_DEBUG_FS */
+
+void bond_debug_register(struct bonding *bond)
+{
+}
+
+void bond_debug_unregister(struct bonding *bond)
+{
+}
+
+void bond_debug_reregister(struct bonding *bond)
+{
+}
+
+void bond_create_debugfs(void)
+{
+}
+
+void bond_destroy_debugfs(void)
+{
+}
+
+#endif /* CONFIG_DEBUG_FS */
diff --git a/drivers/net/bonding/bond_ipv6.c b/drivers/net/bonding/bond_ipv6.c
index 121b073a6c3..84fbd4ebd77 100644
--- a/drivers/net/bonding/bond_ipv6.c
+++ b/drivers/net/bonding/bond_ipv6.c
@@ -88,7 +88,12 @@ static void bond_na_send(struct net_device *slave_dev,
 	}
 
 	if (vlan_id) {
-		skb = vlan_put_tag(skb, vlan_id);
+		/* The Ethernet header is not present yet, so it is
+		 * too early to insert a VLAN tag.  Force use of an
+		 * out-of-line tag here and let dev_hard_start_xmit()
+		 * insert it if the slave hardware can't.
+		 */
+		skb = __vlan_hwaccel_put_tag(skb, vlan_id);
 		if (!skb) {
 			pr_err("failed to insert VLAN tag\n");
 			return;
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 518844852f0..b1025b85acf 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -171,7 +171,7 @@ MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on link
 /*----------------------------- Global variables ----------------------------*/
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-cpumask_var_t netpoll_block_tx;
+atomic_t netpoll_block_tx = ATOMIC_INIT(0);
 #endif
 
 static const char * const version =
@@ -418,36 +418,11 @@ struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
  * @bond: bond device that got this skb for tx.
  * @skb: hw accel VLAN tagged skb to transmit
  * @slave_dev: slave that is supposed to xmit this skbuff
- *
- * When the bond gets an skb to transmit that is
- * already hardware accelerated VLAN tagged, and it
- * needs to relay this skb to a slave that is not
- * hw accel capable, the skb needs to be "unaccelerated",
- * i.e. strip the hwaccel tag and re-insert it as part
- * of the payload.
  */
 int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
 			struct net_device *slave_dev)
 {
-	unsigned short uninitialized_var(vlan_id);
-
-	/* Test vlan_list not vlgrp to catch and handle 802.1p tags */
-	if (!list_empty(&bond->vlan_list) &&
-	    !(slave_dev->features & NETIF_F_HW_VLAN_TX) &&
-	    vlan_get_tag(skb, &vlan_id) == 0) {
-		skb->dev = slave_dev;
-		skb = vlan_put_tag(skb, vlan_id);
-		if (!skb) {
-			/* vlan_put_tag() frees the skb in case of error,
-			 * so return success here so the calling functions
-			 * won't attempt to free is again.
-			 */
-			return 0;
-		}
-	} else {
-		skb->dev = slave_dev;
-	}
-
+	skb->dev = slave_dev;
 	skb->priority = 1;
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	if (unlikely(bond->dev->priv_flags & IFF_IN_NETPOLL)) {
@@ -873,15 +848,11 @@ static void bond_mc_del(struct bonding *bond, void *addr)
 static void __bond_resend_igmp_join_requests(struct net_device *dev)
 {
 	struct in_device *in_dev;
-	struct ip_mc_list *im;
 
 	rcu_read_lock();
 	in_dev = __in_dev_get_rcu(dev);
-	if (in_dev) {
-		for (im = in_dev->mc_list; im; im = im->next)
-			ip_mc_rejoin_group(im);
-	}
-
+	if (in_dev)
+		ip_mc_rejoin_groups(in_dev);
 	rcu_read_unlock();
 }
 
@@ -1201,11 +1172,13 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 				bond_do_fail_over_mac(bond, new_active,
 						      old_active);
 
-			bond->send_grat_arp = bond->params.num_grat_arp;
-			bond_send_gratuitous_arp(bond);
+			if (netif_running(bond->dev)) {
+				bond->send_grat_arp = bond->params.num_grat_arp;
+				bond_send_gratuitous_arp(bond);
 
-			bond->send_unsol_na = bond->params.num_unsol_na;
-			bond_send_unsolicited_na(bond);
+				bond->send_unsol_na = bond->params.num_unsol_na;
+				bond_send_unsolicited_na(bond);
+			}
 
 			write_unlock_bh(&bond->curr_slave_lock);
 			read_unlock(&bond->lock);
@@ -1219,8 +1192,9 @@ void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
 
 	/* resend IGMP joins since active slave has changed or
 	 * all were sent on curr_active_slave */
-	if ((USES_PRIMARY(bond->params.mode) && new_active) ||
-	    bond->params.mode == BOND_MODE_ROUNDROBIN) {
+	if (((USES_PRIMARY(bond->params.mode) && new_active) ||
+	     bond->params.mode == BOND_MODE_ROUNDROBIN) &&
+	    netif_running(bond->dev)) {
 		bond->igmp_retrans = bond->params.resend_igmp;
 		queue_delayed_work(bond->wq, &bond->mcast_work, 0);
 	}
@@ -1574,7 +1548,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 
 	/* If this is the first slave, then we need to set the master's hardware
 	 * address to be the same as the slave's. */
-	if (bond->slave_cnt == 0)
+	if (is_zero_ether_addr(bond->dev->dev_addr))
 		memcpy(bond->dev->dev_addr, slave_dev->dev_addr,
 		       slave_dev->addr_len);
 
@@ -3507,6 +3481,8 @@ static int bond_event_changename(struct bonding *bond)
 	bond_remove_proc_entry(bond);
 	bond_create_proc_entry(bond);
 
+	bond_debug_reregister(bond);
+
 	return NOTIFY_DONE;
 }
 
@@ -4789,6 +4765,8 @@ static void bond_uninit(struct net_device *bond_dev)
 
 	bond_remove_proc_entry(bond);
 
+	bond_debug_unregister(bond);
+
 	__hw_addr_flush(&bond->mc_list);
 
 	list_for_each_entry_safe(vlan, tmp, &bond->vlan_list, vlan_list) {
@@ -5191,6 +5169,8 @@ static int bond_init(struct net_device *bond_dev)
 
 	bond_prepare_sysfs_group(bond);
 
+	bond_debug_register(bond);
+
 	__hw_addr_init(&bond->mc_list);
 	return 0;
 }
@@ -5297,13 +5277,6 @@ static int __init bonding_init(void)
 	if (res)
 		goto out;
 
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	if (!alloc_cpumask_var(&netpoll_block_tx, GFP_KERNEL)) {
-		res = -ENOMEM;
-		goto out;
-	}
-#endif
-
 	res = register_pernet_subsys(&bond_net_ops);
 	if (res)
 		goto out;
@@ -5312,6 +5285,8 @@ static int __init bonding_init(void)
 	if (res)
 		goto err_link;
 
+	bond_create_debugfs();
+
 	for (i = 0; i < max_bonds; i++) {
 		res = bond_create(&init_net, NULL);
 		if (res)
@@ -5322,7 +5297,6 @@ static int __init bonding_init(void)
 	if (res)
 		goto err;
 
-
 	register_netdevice_notifier(&bond_netdev_notifier);
 	register_inetaddr_notifier(&bond_inetaddr_notifier);
 	bond_register_ipv6_notifier();
@@ -5332,9 +5306,6 @@ err:
 	rtnl_link_unregister(&bond_link_ops);
 err_link:
 	unregister_pernet_subsys(&bond_net_ops);
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	free_cpumask_var(netpoll_block_tx);
-#endif
 	goto out;
 
 }
@@ -5346,12 +5317,16 @@ static void __exit bonding_exit(void)
 	bond_unregister_ipv6_notifier();
 
 	bond_destroy_sysfs();
+	bond_destroy_debugfs();
 
 	rtnl_link_unregister(&bond_link_ops);
 	unregister_pernet_subsys(&bond_net_ops);
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-	free_cpumask_var(netpoll_block_tx);
+	/*
+	 * Make sure we don't have an imbalance on our netpoll blocking
+	 */
+	WARN_ON(atomic_read(&netpoll_block_tx));
 #endif
 }
 
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 4eedb12df6c..4da384cc760 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -119,26 +119,22 @@
 
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-extern cpumask_var_t netpoll_block_tx;
+extern atomic_t netpoll_block_tx;
 
 static inline void block_netpoll_tx(void)
 {
-	preempt_disable();
-	BUG_ON(cpumask_test_and_set_cpu(smp_processor_id(),
-					netpoll_block_tx));
+	atomic_inc(&netpoll_block_tx);
 }
 
 static inline void unblock_netpoll_tx(void)
 {
-	BUG_ON(!cpumask_test_and_clear_cpu(smp_processor_id(),
-					   netpoll_block_tx));
-	preempt_enable();
+	atomic_dec(&netpoll_block_tx);
 }
 
 static inline int is_netpoll_tx_blocked(struct net_device *dev)
 {
 	if (unlikely(dev->priv_flags & IFF_IN_NETPOLL))
-		return cpumask_test_cpu(smp_processor_id(), netpoll_block_tx);
+		return atomic_read(&netpoll_block_tx);
 	return 0;
 }
 #else
@@ -259,6 +255,10 @@ struct bonding {
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 	struct   in6_addr master_ipv6;
 #endif
+#ifdef CONFIG_DEBUG_FS
+	/* debugging suport via debugfs */
+	struct	 dentry *debug_dir;
+#endif /* CONFIG_DEBUG_FS */
 };
 
 /**
@@ -273,11 +273,11 @@ static inline struct slave *bond_get_slave_by_dev(struct bonding *bond, struct n
 
 	bond_for_each_slave(bond, slave, i) {
 		if (slave->dev == slave_dev) {
-			break;
+			return slave;
 		}
 	}
 
-	return slave;
+	return 0;
 }
 
 static inline struct bonding *bond_get_bond_by_slave(struct slave *slave)
@@ -286,7 +286,7 @@ static inline struct bonding *bond_get_bond_by_slave(struct slave *slave)
 		return NULL;
 	}
 
-	return (struct bonding *)netdev_priv(slave->dev->master);
+	return netdev_priv(slave->dev->master);
 }
 
 static inline bool bond_is_lb(const struct bonding *bond)
@@ -380,6 +380,11 @@ void bond_select_active_slave(struct bonding *bond);
 void bond_change_active_slave(struct bonding *bond, struct slave *new_active);
 void bond_register_arp(struct bonding *);
 void bond_unregister_arp(struct bonding *);
+void bond_create_debugfs(void);
+void bond_destroy_debugfs(void);
+void bond_debug_register(struct bonding *bond);
+void bond_debug_unregister(struct bonding *bond);
+void bond_debug_reregister(struct bonding *bond);
 
 struct bond_net {
 	struct net *		net;	/* Associated network namespace */
diff --git a/drivers/net/caif/caif_shm_u5500.c b/drivers/net/caif/caif_shm_u5500.c
index 1cd90da86f1..5f771ab712c 100644
--- a/drivers/net/caif/caif_shm_u5500.c
+++ b/drivers/net/caif/caif_shm_u5500.c
@@ -5,13 +5,13 @@
  * License terms: GNU General Public License (GPL) version 2
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ":" __func__ "():" fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
 
 #include <linux/version.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
-#include <mach/mbox.h>
+#include <mach/mbox-db5500.h>
 #include <net/caif/caif_shm.h>
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/caif/caif_shmcore.c b/drivers/net/caif/caif_shmcore.c
index 19f9c065666..80511167f35 100644
--- a/drivers/net/caif/caif_shmcore.c
+++ b/drivers/net/caif/caif_shmcore.c
@@ -6,7 +6,7 @@
  * License terms: GNU General Public License (GPL) version 2
  */
 
-#define pr_fmt(fmt) KBUILD_MODNAME ":" __func__ "():" fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
 
 #include <linux/spinlock.h>
 #include <linux/sched.h>
diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c
index 8b4cea57a6c..20da1996d35 100644
--- a/drivers/net/caif/caif_spi.c
+++ b/drivers/net/caif/caif_spi.c
@@ -635,8 +635,8 @@ int cfspi_spi_probe(struct platform_device *pdev)
 
 	ndev = alloc_netdev(sizeof(struct cfspi),
 			"cfspi%d", cfspi_setup);
-	if (!dev)
-		return -ENODEV;
+	if (!ndev)
+		return -ENOMEM;
 
 	cfspi = netdev_priv(ndev);
 	netif_stop_queue(ndev);
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index 080574b0fff..d5a9db60ade 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -12,6 +12,27 @@ config CAN_VCAN
 	  This driver can also be built as a module.  If so, the module
 	  will be called vcan.
 
+config CAN_SLCAN
+	tristate "Serial / USB serial CAN Adaptors (slcan)"
+	depends on CAN
+	default N
+	---help---
+	  CAN driver for several 'low cost' CAN interfaces that are attached
+	  via serial lines or via USB-to-serial adapters using the LAWICEL
+	  ASCII protocol. The driver implements the tty linediscipline N_SLCAN.
+
+	  As only the sending and receiving of CAN frames is implemented, this
+	  driver should work with the (serial/USB) CAN hardware from:
+	  www.canusb.com / www.can232.com / www.mictronic.com / www.canhack.de
+
+	  Userspace tools to attach the SLCAN line discipline (slcan_attach,
+	  slcand) can be found in the can-utils at the SocketCAN SVN, see
+	  http://developer.berlios.de/projects/socketcan for details.
+
+	  The slcan driver supports up to 10 CAN netdevices by default which
+	  can be changed by the 'maxdev=xx' module option. This driver can
+	  also be built as a module. If so, the module will be called slcan.
+
 config CAN_DEV
 	tristate "Platform CAN drivers with Netlink support"
 	depends on CAN
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index 90af15a4f10..07ca159ba3f 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_CAN_VCAN)		+= vcan.o
+obj-$(CONFIG_CAN_SLCAN)		+= slcan.o
 
 obj-$(CONFIG_CAN_DEV)		+= can-dev.o
 can-dev-y			:= dev.o
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 6e533dcc36c..b9a6d7a5a73 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -1114,11 +1114,6 @@ static bool ican3_txok(struct ican3_dev *mod)
 /*
  * Recieve one CAN frame from the hardware
  *
- * This works like the core of a NAPI function, but is intended to be called
- * from workqueue context instead. This driver already needs a workqueue to
- * process control messages, so we use the workqueue instead of using NAPI.
- * This was done to simplify locking.
- *
  * CONTEXT: must be called from user context
  */
 static int ican3_recv_skb(struct ican3_dev *mod)
@@ -1251,7 +1246,6 @@ static irqreturn_t ican3_irq(int irq, void *dev_id)
  * Reset an ICAN module to its power-on state
  *
  * CONTEXT: no network device registered
- * LOCKING: work function disabled
  */
 static int ican3_reset_module(struct ican3_dev *mod)
 {
@@ -1262,9 +1256,6 @@ static int ican3_reset_module(struct ican3_dev *mod)
 	/* disable interrupts so no more work is scheduled */
 	iowrite8(1 << mod->num, &mod->ctrl->int_disable);
 
-	/* flush any pending work */
-	flush_scheduled_work();
-
 	/* the first unallocated page in the DPM is #9 */
 	mod->free_page = DPM_FREE_START;
 
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index 672718261c6..c42e9726824 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -32,106 +32,115 @@
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 
-#define MAX_MSG_OBJ		32
-#define MSG_OBJ_RX		0 /* The receive message object flag. */
-#define MSG_OBJ_TX		1 /* The transmit message object flag. */
-
-#define ENABLE			1 /* The enable flag */
-#define DISABLE			0 /* The disable flag */
-#define CAN_CTRL_INIT		0x0001 /* The INIT bit of CANCONT register. */
-#define CAN_CTRL_IE		0x0002 /* The IE bit of CAN control register */
-#define CAN_CTRL_IE_SIE_EIE	0x000e
-#define CAN_CTRL_CCE		0x0040
-#define CAN_CTRL_OPT		0x0080 /* The OPT bit of CANCONT register. */
-#define CAN_OPT_SILENT		0x0008 /* The Silent bit of CANOPT reg. */
-#define CAN_OPT_LBACK		0x0010 /* The LoopBack bit of CANOPT reg. */
-#define CAN_CMASK_RX_TX_SET	0x00f3
-#define CAN_CMASK_RX_TX_GET	0x0073
-#define CAN_CMASK_ALL		0xff
-#define CAN_CMASK_RDWR		0x80
-#define CAN_CMASK_ARB		0x20
-#define CAN_CMASK_CTRL		0x10
-#define CAN_CMASK_MASK		0x40
-#define CAN_CMASK_NEWDAT	0x04
-#define CAN_CMASK_CLRINTPND	0x08
-
-#define CAN_IF_MCONT_NEWDAT	0x8000
-#define CAN_IF_MCONT_INTPND	0x2000
-#define CAN_IF_MCONT_UMASK	0x1000
-#define CAN_IF_MCONT_TXIE	0x0800
-#define CAN_IF_MCONT_RXIE	0x0400
-#define CAN_IF_MCONT_RMTEN	0x0200
-#define CAN_IF_MCONT_TXRQXT	0x0100
-#define CAN_IF_MCONT_EOB	0x0080
-#define CAN_IF_MCONT_DLC	0x000f
-#define CAN_IF_MCONT_MSGLOST	0x4000
-#define CAN_MASK2_MDIR_MXTD	0xc000
-#define CAN_ID2_DIR		0x2000
-#define CAN_ID_MSGVAL		0x8000
-
-#define CAN_STATUS_INT		0x8000
-#define CAN_IF_CREQ_BUSY	0x8000
-#define CAN_ID2_XTD		0x4000
-
-#define CAN_REC			0x00007f00
-#define CAN_TEC			0x000000ff
-
-#define PCH_RX_OK		0x00000010
-#define PCH_TX_OK		0x00000008
-#define PCH_BUS_OFF		0x00000080
-#define PCH_EWARN		0x00000040
-#define PCH_EPASSIV		0x00000020
-#define PCH_LEC0		0x00000001
-#define PCH_LEC1		0x00000002
-#define PCH_LEC2		0x00000004
-#define PCH_LEC_ALL		(PCH_LEC0 | PCH_LEC1 | PCH_LEC2)
-#define PCH_STUF_ERR		PCH_LEC0
-#define PCH_FORM_ERR		PCH_LEC1
-#define PCH_ACK_ERR		(PCH_LEC0 | PCH_LEC1)
-#define PCH_BIT1_ERR		PCH_LEC2
-#define PCH_BIT0_ERR		(PCH_LEC0 | PCH_LEC2)
-#define PCH_CRC_ERR		(PCH_LEC1 | PCH_LEC2)
+#define PCH_CTRL_INIT		BIT(0) /* The INIT bit of CANCONT register. */
+#define PCH_CTRL_IE		BIT(1) /* The IE bit of CAN control register */
+#define PCH_CTRL_IE_SIE_EIE	(BIT(3) | BIT(2) | BIT(1))
+#define PCH_CTRL_CCE		BIT(6)
+#define PCH_CTRL_OPT		BIT(7) /* The OPT bit of CANCONT register. */
+#define PCH_OPT_SILENT		BIT(3) /* The Silent bit of CANOPT reg. */
+#define PCH_OPT_LBACK		BIT(4) /* The LoopBack bit of CANOPT reg. */
+
+#define PCH_CMASK_RX_TX_SET	0x00f3
+#define PCH_CMASK_RX_TX_GET	0x0073
+#define PCH_CMASK_ALL		0xff
+#define PCH_CMASK_NEWDAT	BIT(2)
+#define PCH_CMASK_CLRINTPND	BIT(3)
+#define PCH_CMASK_CTRL		BIT(4)
+#define PCH_CMASK_ARB		BIT(5)
+#define PCH_CMASK_MASK		BIT(6)
+#define PCH_CMASK_RDWR		BIT(7)
+#define PCH_IF_MCONT_NEWDAT	BIT(15)
+#define PCH_IF_MCONT_MSGLOST	BIT(14)
+#define PCH_IF_MCONT_INTPND	BIT(13)
+#define PCH_IF_MCONT_UMASK	BIT(12)
+#define PCH_IF_MCONT_TXIE	BIT(11)
+#define PCH_IF_MCONT_RXIE	BIT(10)
+#define PCH_IF_MCONT_RMTEN	BIT(9)
+#define PCH_IF_MCONT_TXRQXT	BIT(8)
+#define PCH_IF_MCONT_EOB	BIT(7)
+#define PCH_IF_MCONT_DLC	(BIT(0) | BIT(1) | BIT(2) | BIT(3))
+#define PCH_MASK2_MDIR_MXTD	(BIT(14) | BIT(15))
+#define PCH_ID2_DIR		BIT(13)
+#define PCH_ID2_XTD		BIT(14)
+#define PCH_ID_MSGVAL		BIT(15)
+#define PCH_IF_CREQ_BUSY	BIT(15)
+
+#define PCH_STATUS_INT		0x8000
+#define PCH_REC			0x00007f00
+#define PCH_TEC			0x000000ff
+
+#define PCH_TX_OK		BIT(3)
+#define PCH_RX_OK		BIT(4)
+#define PCH_EPASSIV		BIT(5)
+#define PCH_EWARN		BIT(6)
+#define PCH_BUS_OFF		BIT(7)
 
 /* bit position of certain controller bits. */
-#define BIT_BITT_BRP		0
-#define BIT_BITT_SJW		6
-#define BIT_BITT_TSEG1		8
-#define BIT_BITT_TSEG2		12
-#define BIT_IF1_MCONT_RXIE	10
-#define BIT_IF2_MCONT_TXIE	11
-#define BIT_BRPE_BRPE		6
-#define BIT_ES_TXERRCNT		0
-#define BIT_ES_RXERRCNT		8
-#define MSK_BITT_BRP		0x3f
-#define MSK_BITT_SJW		0xc0
-#define MSK_BITT_TSEG1		0xf00
-#define MSK_BITT_TSEG2		0x7000
-#define MSK_BRPE_BRPE		0x3c0
-#define MSK_BRPE_GET		0x0f
-#define MSK_CTRL_IE_SIE_EIE	0x07
-#define MSK_MCONT_TXIE		0x08
-#define MSK_MCONT_RXIE		0x10
-#define PCH_CAN_NO_TX_BUFF	1
-#define COUNTER_LIMIT		10
+#define PCH_BIT_BRP_SHIFT	0
+#define PCH_BIT_SJW_SHIFT	6
+#define PCH_BIT_TSEG1_SHIFT	8
+#define PCH_BIT_TSEG2_SHIFT	12
+#define PCH_BIT_BRPE_BRPE_SHIFT	6
+
+#define PCH_MSK_BITT_BRP	0x3f
+#define PCH_MSK_BRPE_BRPE	0x3c0
+#define PCH_MSK_CTRL_IE_SIE_EIE	0x07
+#define PCH_COUNTER_LIMIT	10
 
 #define PCH_CAN_CLK		50000000	/* 50MHz */
 
-/* Define the number of message object.
+/*
+ * Define the number of message object.
  * PCH CAN communications are done via Message RAM.
- * The Message RAM consists of 32 message objects. */
-#define PCH_RX_OBJ_NUM		26  /* 1~ PCH_RX_OBJ_NUM is Rx*/
-#define PCH_TX_OBJ_NUM		6  /* PCH_RX_OBJ_NUM is RX ~ Tx*/
-#define PCH_OBJ_NUM		(PCH_TX_OBJ_NUM + PCH_RX_OBJ_NUM)
+ * The Message RAM consists of 32 message objects.
+ */
+#define PCH_RX_OBJ_NUM		26
+#define PCH_TX_OBJ_NUM		6
+#define PCH_RX_OBJ_START	1
+#define PCH_RX_OBJ_END		PCH_RX_OBJ_NUM
+#define PCH_TX_OBJ_START	(PCH_RX_OBJ_END + 1)
+#define PCH_TX_OBJ_END		(PCH_RX_OBJ_NUM + PCH_TX_OBJ_NUM)
 
 #define PCH_FIFO_THRESH		16
 
+/* TxRqst2 show status of MsgObjNo.17~32 */
+#define PCH_TREQ2_TX_MASK	(((1 << PCH_TX_OBJ_NUM) - 1) <<\
+							(PCH_RX_OBJ_END - 16))
+
+enum pch_ifreg {
+	PCH_RX_IFREG,
+	PCH_TX_IFREG,
+};
+
+enum pch_can_err {
+	PCH_STUF_ERR = 1,
+	PCH_FORM_ERR,
+	PCH_ACK_ERR,
+	PCH_BIT1_ERR,
+	PCH_BIT0_ERR,
+	PCH_CRC_ERR,
+	PCH_LEC_ALL,
+};
+
 enum pch_can_mode {
 	PCH_CAN_ENABLE,
 	PCH_CAN_DISABLE,
 	PCH_CAN_ALL,
 	PCH_CAN_NONE,
 	PCH_CAN_STOP,
-	PCH_CAN_RUN
+	PCH_CAN_RUN,
+};
+
+struct pch_can_if_regs {
+	u32 creq;
+	u32 cmask;
+	u32 mask1;
+	u32 mask2;
+	u32 id1;
+	u32 id2;
+	u32 mcont;
+	u32 data[4];
+	u32 rsv[13];
 };
 
 struct pch_can_regs {
@@ -142,57 +151,36 @@ struct pch_can_regs {
 	u32 intr;
 	u32 opt;
 	u32 brpe;
-	u32 reserve1;
-	u32 if1_creq;
-	u32 if1_cmask;
-	u32 if1_mask1;
-	u32 if1_mask2;
-	u32 if1_id1;
-	u32 if1_id2;
-	u32 if1_mcont;
-	u32 if1_dataa1;
-	u32 if1_dataa2;
-	u32 if1_datab1;
-	u32 if1_datab2;
-	u32 reserve2;
-	u32 reserve3[12];
-	u32 if2_creq;
-	u32 if2_cmask;
-	u32 if2_mask1;
-	u32 if2_mask2;
-	u32 if2_id1;
-	u32 if2_id2;
-	u32 if2_mcont;
-	u32 if2_dataa1;
-	u32 if2_dataa2;
-	u32 if2_datab1;
-	u32 if2_datab2;
-	u32 reserve4;
-	u32 reserve5[20];
+	u32 reserve;
+	struct pch_can_if_regs ifregs[2]; /* [0]=if1  [1]=if2 */
+	u32 reserve1[8];
 	u32 treq1;
 	u32 treq2;
-	u32 reserve6[2];
-	u32 reserve7[56];
-	u32 reserve8[3];
+	u32 reserve2[6];
+	u32 data1;
+	u32 data2;
+	u32 reserve3[6];
+	u32 canipend1;
+	u32 canipend2;
+	u32 reserve4[6];
+	u32 canmval1;
+	u32 canmval2;
+	u32 reserve5[37];
 	u32 srst;
 };
 
 struct pch_can_priv {
 	struct can_priv can;
-	unsigned int can_num;
 	struct pci_dev *dev;
-	unsigned int tx_enable[MAX_MSG_OBJ];
-	unsigned int rx_enable[MAX_MSG_OBJ];
-	unsigned int rx_link[MAX_MSG_OBJ];
-	unsigned int int_enables;
-	unsigned int int_stat;
+	u32 tx_enable[PCH_TX_OBJ_END];
+	u32 rx_enable[PCH_TX_OBJ_END];
+	u32 rx_link[PCH_TX_OBJ_END];
+	u32 int_enables;
 	struct net_device *ndev;
-	spinlock_t msgif_reg_lock; /* Message Interface Registers Access Lock*/
-	unsigned int msg_obj[MAX_MSG_OBJ];
 	struct pch_can_regs __iomem *regs;
 	struct napi_struct napi;
-	unsigned int tx_obj;	/* Point next Tx Obj index */
-	unsigned int use_msi;
+	int tx_obj;	/* Point next Tx Obj index */
+	int use_msi;
 };
 
 static struct can_bittiming_const pch_can_bittiming_const = {
@@ -228,15 +216,15 @@ static void pch_can_set_run_mode(struct pch_can_priv *priv,
 {
 	switch (mode) {
 	case PCH_CAN_RUN:
-		pch_can_bit_clear(&priv->regs->cont, CAN_CTRL_INIT);
+		pch_can_bit_clear(&priv->regs->cont, PCH_CTRL_INIT);
 		break;
 
 	case PCH_CAN_STOP:
-		pch_can_bit_set(&priv->regs->cont, CAN_CTRL_INIT);
+		pch_can_bit_set(&priv->regs->cont, PCH_CTRL_INIT);
 		break;
 
 	default:
-		dev_err(&priv->ndev->dev, "%s -> Invalid Mode.\n", __func__);
+		netdev_err(priv->ndev, "%s -> Invalid Mode.\n", __func__);
 		break;
 	}
 }
@@ -246,357 +234,184 @@ static void pch_can_set_optmode(struct pch_can_priv *priv)
 	u32 reg_val = ioread32(&priv->regs->opt);
 
 	if (priv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY)
-		reg_val |= CAN_OPT_SILENT;
+		reg_val |= PCH_OPT_SILENT;
 
 	if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
-		reg_val |= CAN_OPT_LBACK;
+		reg_val |= PCH_OPT_LBACK;
 
-	pch_can_bit_set(&priv->regs->cont, CAN_CTRL_OPT);
+	pch_can_bit_set(&priv->regs->cont, PCH_CTRL_OPT);
 	iowrite32(reg_val, &priv->regs->opt);
 }
 
-static void pch_can_set_int_custom(struct pch_can_priv *priv)
+static void pch_can_rw_msg_obj(void __iomem *creq_addr, u32 num)
 {
-	/* Clearing the IE, SIE and EIE bits of Can control register. */
-	pch_can_bit_clear(&priv->regs->cont, CAN_CTRL_IE_SIE_EIE);
-
-	/* Appropriately setting them. */
-	pch_can_bit_set(&priv->regs->cont,
-			((priv->int_enables & MSK_CTRL_IE_SIE_EIE) << 1));
-}
+	int counter = PCH_COUNTER_LIMIT;
+	u32 ifx_creq;
 
-/* This function retrieves interrupt enabled for the CAN device. */
-static void pch_can_get_int_enables(struct pch_can_priv *priv, u32 *enables)
-{
-	/* Obtaining the status of IE, SIE and EIE interrupt bits. */
-	*enables = ((ioread32(&priv->regs->cont) & CAN_CTRL_IE_SIE_EIE) >> 1);
+	iowrite32(num, creq_addr);
+	while (counter) {
+		ifx_creq = ioread32(creq_addr) & PCH_IF_CREQ_BUSY;
+		if (!ifx_creq)
+			break;
+		counter--;
+		udelay(1);
+	}
+	if (!counter)
+		pr_err("%s:IF1 BUSY Flag is set forever.\n", __func__);
 }
 
 static void pch_can_set_int_enables(struct pch_can_priv *priv,
 				    enum pch_can_mode interrupt_no)
 {
 	switch (interrupt_no) {
-	case PCH_CAN_ENABLE:
-		pch_can_bit_set(&priv->regs->cont, CAN_CTRL_IE);
-		break;
-
 	case PCH_CAN_DISABLE:
-		pch_can_bit_clear(&priv->regs->cont, CAN_CTRL_IE);
+		pch_can_bit_clear(&priv->regs->cont, PCH_CTRL_IE);
 		break;
 
 	case PCH_CAN_ALL:
-		pch_can_bit_set(&priv->regs->cont, CAN_CTRL_IE_SIE_EIE);
+		pch_can_bit_set(&priv->regs->cont, PCH_CTRL_IE_SIE_EIE);
 		break;
 
 	case PCH_CAN_NONE:
-		pch_can_bit_clear(&priv->regs->cont, CAN_CTRL_IE_SIE_EIE);
+		pch_can_bit_clear(&priv->regs->cont, PCH_CTRL_IE_SIE_EIE);
 		break;
 
 	default:
-		dev_err(&priv->ndev->dev, "Invalid interrupt number.\n");
+		netdev_err(priv->ndev, "Invalid interrupt number.\n");
 		break;
 	}
 }
 
-static void pch_can_check_if_busy(u32 __iomem *creq_addr, u32 num)
-{
-	u32 counter = COUNTER_LIMIT;
-	u32 ifx_creq;
-
-	iowrite32(num, creq_addr);
-	while (counter) {
-		ifx_creq = ioread32(creq_addr) & CAN_IF_CREQ_BUSY;
-		if (!ifx_creq)
-			break;
-		counter--;
-		udelay(1);
-	}
-	if (!counter)
-		pr_err("%s:IF1 BUSY Flag is set forever.\n", __func__);
-}
-
-static void pch_can_set_rx_enable(struct pch_can_priv *priv, u32 buff_num,
-				  u32 set)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->msgif_reg_lock, flags);
-	/* Reading the receive buffer data from RAM to Interface1 registers */
-	iowrite32(CAN_CMASK_RX_TX_GET, &priv->regs->if1_cmask);
-	pch_can_check_if_busy(&priv->regs->if1_creq, buff_num);
-
-	/* Setting the IF1MASK1 register to access MsgVal and RxIE bits */
-	iowrite32(CAN_CMASK_RDWR | CAN_CMASK_ARB | CAN_CMASK_CTRL,
-		  &priv->regs->if1_cmask);
-
-	if (set == ENABLE) {
-		/* Setting the MsgVal and RxIE bits */
-		pch_can_bit_set(&priv->regs->if1_mcont, CAN_IF_MCONT_RXIE);
-		pch_can_bit_set(&priv->regs->if1_id2, CAN_ID_MSGVAL);
-
-	} else if (set == DISABLE) {
-		/* Resetting the MsgVal and RxIE bits */
-		pch_can_bit_clear(&priv->regs->if1_mcont, CAN_IF_MCONT_RXIE);
-		pch_can_bit_clear(&priv->regs->if1_id2, CAN_ID_MSGVAL);
-	}
-
-	pch_can_check_if_busy(&priv->regs->if1_creq, buff_num);
-	spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
-}
-
-static void pch_can_rx_enable_all(struct pch_can_priv *priv)
+static void pch_can_set_rxtx(struct pch_can_priv *priv, u32 buff_num,
+			     int set, enum pch_ifreg dir)
 {
-	int i;
+	u32 ie;
 
-	/* Traversing to obtain the object configured as receivers. */
-	for (i = 0; i < PCH_OBJ_NUM; i++) {
-		if (priv->msg_obj[i] == MSG_OBJ_RX)
-			pch_can_set_rx_enable(priv, i + 1, ENABLE);
-	}
-}
+	if (dir)
+		ie = PCH_IF_MCONT_TXIE;
+	else
+		ie = PCH_IF_MCONT_RXIE;
 
-static void pch_can_rx_disable_all(struct pch_can_priv *priv)
-{
-	int i;
+	/* Reading the Msg buffer from Message RAM to IF1/2 registers. */
+	iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[dir].cmask);
+	pch_can_rw_msg_obj(&priv->regs->ifregs[dir].creq, buff_num);
 
-	/* Traversing to obtain the object configured as receivers. */
-	for (i = 0; i < PCH_OBJ_NUM; i++) {
-		if (priv->msg_obj[i] == MSG_OBJ_RX)
-			pch_can_set_rx_enable(priv, i + 1, DISABLE);
-	}
-}
+	/* Setting the IF1/2MASK1 register to access MsgVal and RxIE bits */
+	iowrite32(PCH_CMASK_RDWR | PCH_CMASK_ARB | PCH_CMASK_CTRL,
+		  &priv->regs->ifregs[dir].cmask);
 
-static void pch_can_set_tx_enable(struct pch_can_priv *priv, u32 buff_num,
-				 u32 set)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->msgif_reg_lock, flags);
-	/* Reading the Msg buffer from Message RAM to Interface2 registers. */
-	iowrite32(CAN_CMASK_RX_TX_GET, &priv->regs->if2_cmask);
-	pch_can_check_if_busy(&priv->regs->if2_creq, buff_num);
-
-	/* Setting the IF2CMASK register for accessing the
-		MsgVal and TxIE bits */
-	iowrite32(CAN_CMASK_RDWR | CAN_CMASK_ARB | CAN_CMASK_CTRL,
-		 &priv->regs->if2_cmask);
-
-	if (set == ENABLE) {
-		/* Setting the MsgVal and TxIE bits */
-		pch_can_bit_set(&priv->regs->if2_mcont, CAN_IF_MCONT_TXIE);
-		pch_can_bit_set(&priv->regs->if2_id2, CAN_ID_MSGVAL);
-	} else if (set == DISABLE) {
-		/* Resetting the MsgVal and TxIE bits. */
-		pch_can_bit_clear(&priv->regs->if2_mcont, CAN_IF_MCONT_TXIE);
-		pch_can_bit_clear(&priv->regs->if2_id2, CAN_ID_MSGVAL);
+	if (set) {
+		/* Setting the MsgVal and RxIE/TxIE bits */
+		pch_can_bit_set(&priv->regs->ifregs[dir].mcont, ie);
+		pch_can_bit_set(&priv->regs->ifregs[dir].id2, PCH_ID_MSGVAL);
+	} else {
+		/* Clearing the MsgVal and RxIE/TxIE bits */
+		pch_can_bit_clear(&priv->regs->ifregs[dir].mcont, ie);
+		pch_can_bit_clear(&priv->regs->ifregs[dir].id2, PCH_ID_MSGVAL);
 	}
 
-	pch_can_check_if_busy(&priv->regs->if2_creq, buff_num);
-	spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
+	pch_can_rw_msg_obj(&priv->regs->ifregs[dir].creq, buff_num);
 }
 
-static void pch_can_tx_enable_all(struct pch_can_priv *priv)
+static void pch_can_set_rx_all(struct pch_can_priv *priv, int set)
 {
 	int i;
 
-	/* Traversing to obtain the object configured as transmit object. */
-	for (i = 0; i < PCH_OBJ_NUM; i++) {
-		if (priv->msg_obj[i] == MSG_OBJ_TX)
-			pch_can_set_tx_enable(priv, i + 1, ENABLE);
-	}
+	/* Traversing to obtain the object configured as receivers. */
+	for (i = PCH_RX_OBJ_START; i <= PCH_RX_OBJ_END; i++)
+		pch_can_set_rxtx(priv, i, set, PCH_RX_IFREG);
 }
 
-static void pch_can_tx_disable_all(struct pch_can_priv *priv)
+static void pch_can_set_tx_all(struct pch_can_priv *priv, int set)
 {
 	int i;
 
 	/* Traversing to obtain the object configured as transmit object. */
-	for (i = 0; i < PCH_OBJ_NUM; i++) {
-		if (priv->msg_obj[i] == MSG_OBJ_TX)
-			pch_can_set_tx_enable(priv, i + 1, DISABLE);
-	}
-}
-
-static void pch_can_get_rx_enable(struct pch_can_priv *priv, u32 buff_num,
-				 u32 *enable)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->msgif_reg_lock, flags);
-	iowrite32(CAN_CMASK_RX_TX_GET, &priv->regs->if1_cmask);
-	pch_can_check_if_busy(&priv->regs->if1_creq, buff_num);
-
-	if (((ioread32(&priv->regs->if1_id2)) & CAN_ID_MSGVAL) &&
-			((ioread32(&priv->regs->if1_mcont)) &
-			CAN_IF_MCONT_RXIE))
-		*enable = ENABLE;
-	else
-		*enable = DISABLE;
-	spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
-}
-
-static void pch_can_get_tx_enable(struct pch_can_priv *priv, u32 buff_num,
-				 u32 *enable)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->msgif_reg_lock, flags);
-	iowrite32(CAN_CMASK_RX_TX_GET, &priv->regs->if2_cmask);
-	pch_can_check_if_busy(&priv->regs->if2_creq, buff_num);
-
-	if (((ioread32(&priv->regs->if2_id2)) & CAN_ID_MSGVAL) &&
-			((ioread32(&priv->regs->if2_mcont)) &
-			CAN_IF_MCONT_TXIE)) {
-		*enable = ENABLE;
-	} else {
-		*enable = DISABLE;
-	}
-	spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
+	for (i = PCH_TX_OBJ_START; i <= PCH_TX_OBJ_END; i++)
+		pch_can_set_rxtx(priv, i, set, PCH_TX_IFREG);
 }
 
-static int pch_can_int_pending(struct pch_can_priv *priv)
+static u32 pch_can_int_pending(struct pch_can_priv *priv)
 {
 	return ioread32(&priv->regs->intr) & 0xffff;
 }
 
-static void pch_can_set_rx_buffer_link(struct pch_can_priv *priv,
-				       u32 buffer_num, u32 set)
+static void pch_can_clear_if_buffers(struct pch_can_priv *priv)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->msgif_reg_lock, flags);
-	iowrite32(CAN_CMASK_RX_TX_GET, &priv->regs->if1_cmask);
-	pch_can_check_if_busy(&priv->regs->if1_creq, buffer_num);
-	iowrite32(CAN_CMASK_RDWR | CAN_CMASK_CTRL, &priv->regs->if1_cmask);
-	if (set == ENABLE)
-		pch_can_bit_clear(&priv->regs->if1_mcont, CAN_IF_MCONT_EOB);
-	else
-		pch_can_bit_set(&priv->regs->if1_mcont, CAN_IF_MCONT_EOB);
-
-	pch_can_check_if_busy(&priv->regs->if1_creq, buffer_num);
-	spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
-}
-
-static void pch_can_get_rx_buffer_link(struct pch_can_priv *priv,
-				       u32 buffer_num, u32 *link)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->msgif_reg_lock, flags);
-	iowrite32(CAN_CMASK_RX_TX_GET, &priv->regs->if1_cmask);
-	pch_can_check_if_busy(&priv->regs->if1_creq, buffer_num);
-
-	if (ioread32(&priv->regs->if1_mcont) & CAN_IF_MCONT_EOB)
-		*link = DISABLE;
-	else
-		*link = ENABLE;
-	spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
-}
-
-static void pch_can_clear_buffers(struct pch_can_priv *priv)
-{
-	int i;
-
-	for (i = 0; i < PCH_RX_OBJ_NUM; i++) {
-		iowrite32(CAN_CMASK_RX_TX_SET, &priv->regs->if1_cmask);
-		iowrite32(0xffff, &priv->regs->if1_mask1);
-		iowrite32(0xffff, &priv->regs->if1_mask2);
-		iowrite32(0x0, &priv->regs->if1_id1);
-		iowrite32(0x0, &priv->regs->if1_id2);
-		iowrite32(0x0, &priv->regs->if1_mcont);
-		iowrite32(0x0, &priv->regs->if1_dataa1);
-		iowrite32(0x0, &priv->regs->if1_dataa2);
-		iowrite32(0x0, &priv->regs->if1_datab1);
-		iowrite32(0x0, &priv->regs->if1_datab2);
-		iowrite32(CAN_CMASK_RDWR | CAN_CMASK_MASK |
-			  CAN_CMASK_ARB | CAN_CMASK_CTRL,
-			  &priv->regs->if1_cmask);
-		pch_can_check_if_busy(&priv->regs->if1_creq, i+1);
-	}
-
-	for (i = i;  i < PCH_OBJ_NUM; i++) {
-		iowrite32(CAN_CMASK_RX_TX_SET, &priv->regs->if2_cmask);
-		iowrite32(0xffff, &priv->regs->if2_mask1);
-		iowrite32(0xffff, &priv->regs->if2_mask2);
-		iowrite32(0x0, &priv->regs->if2_id1);
-		iowrite32(0x0, &priv->regs->if2_id2);
-		iowrite32(0x0, &priv->regs->if2_mcont);
-		iowrite32(0x0, &priv->regs->if2_dataa1);
-		iowrite32(0x0, &priv->regs->if2_dataa2);
-		iowrite32(0x0, &priv->regs->if2_datab1);
-		iowrite32(0x0, &priv->regs->if2_datab2);
-		iowrite32(CAN_CMASK_RDWR | CAN_CMASK_MASK |
-			  CAN_CMASK_ARB | CAN_CMASK_CTRL,
-			  &priv->regs->if2_cmask);
-		pch_can_check_if_busy(&priv->regs->if2_creq, i+1);
+	int i; /* Msg Obj ID (1~32) */
+
+	for (i = PCH_RX_OBJ_START; i <= PCH_TX_OBJ_END; i++) {
+		iowrite32(PCH_CMASK_RX_TX_SET, &priv->regs->ifregs[0].cmask);
+		iowrite32(0xffff, &priv->regs->ifregs[0].mask1);
+		iowrite32(0xffff, &priv->regs->ifregs[0].mask2);
+		iowrite32(0x0, &priv->regs->ifregs[0].id1);
+		iowrite32(0x0, &priv->regs->ifregs[0].id2);
+		iowrite32(0x0, &priv->regs->ifregs[0].mcont);
+		iowrite32(0x0, &priv->regs->ifregs[0].data[0]);
+		iowrite32(0x0, &priv->regs->ifregs[0].data[1]);
+		iowrite32(0x0, &priv->regs->ifregs[0].data[2]);
+		iowrite32(0x0, &priv->regs->ifregs[0].data[3]);
+		iowrite32(PCH_CMASK_RDWR | PCH_CMASK_MASK |
+			  PCH_CMASK_ARB | PCH_CMASK_CTRL,
+			  &priv->regs->ifregs[0].cmask);
+		pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, i);
 	}
 }
 
 static void pch_can_config_rx_tx_buffers(struct pch_can_priv *priv)
 {
 	int i;
-	unsigned long flags;
 
-	spin_lock_irqsave(&priv->msgif_reg_lock, flags);
+	for (i = PCH_RX_OBJ_START; i <= PCH_RX_OBJ_END; i++) {
+		iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
+		pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, i);
 
-	for (i = 0; i < PCH_OBJ_NUM; i++) {
-		if (priv->msg_obj[i] == MSG_OBJ_RX) {
-			iowrite32(CAN_CMASK_RX_TX_GET,
-				&priv->regs->if1_cmask);
-			pch_can_check_if_busy(&priv->regs->if1_creq, i+1);
+		iowrite32(0x0, &priv->regs->ifregs[0].id1);
+		iowrite32(0x0, &priv->regs->ifregs[0].id2);
 
-			iowrite32(0x0, &priv->regs->if1_id1);
-			iowrite32(0x0, &priv->regs->if1_id2);
+		pch_can_bit_set(&priv->regs->ifregs[0].mcont,
+				PCH_IF_MCONT_UMASK);
 
-			pch_can_bit_set(&priv->regs->if1_mcont,
-					CAN_IF_MCONT_UMASK);
+		/* In case FIFO mode, Last EoB of Rx Obj must be 1 */
+		if (i == PCH_RX_OBJ_END)
+			pch_can_bit_set(&priv->regs->ifregs[0].mcont,
+					PCH_IF_MCONT_EOB);
+		else
+			pch_can_bit_clear(&priv->regs->ifregs[0].mcont,
+					  PCH_IF_MCONT_EOB);
 
-			/* Set FIFO mode set to 0 except last Rx Obj*/
-			pch_can_bit_clear(&priv->regs->if1_mcont,
-					  CAN_IF_MCONT_EOB);
-			/* In case FIFO mode, Last EoB of Rx Obj must be 1 */
-			if (i == (PCH_RX_OBJ_NUM - 1))
-				pch_can_bit_set(&priv->regs->if1_mcont,
-						  CAN_IF_MCONT_EOB);
+		iowrite32(0, &priv->regs->ifregs[0].mask1);
+		pch_can_bit_clear(&priv->regs->ifregs[0].mask2,
+				  0x1fff | PCH_MASK2_MDIR_MXTD);
 
-			iowrite32(0, &priv->regs->if1_mask1);
-			pch_can_bit_clear(&priv->regs->if1_mask2,
-					  0x1fff | CAN_MASK2_MDIR_MXTD);
+		/* Setting CMASK for writing */
+		iowrite32(PCH_CMASK_RDWR | PCH_CMASK_MASK | PCH_CMASK_ARB |
+			  PCH_CMASK_CTRL, &priv->regs->ifregs[0].cmask);
 
-			/* Setting CMASK for writing */
-			iowrite32(CAN_CMASK_RDWR | CAN_CMASK_MASK |
-				  CAN_CMASK_ARB | CAN_CMASK_CTRL,
-				  &priv->regs->if1_cmask);
-
-			pch_can_check_if_busy(&priv->regs->if1_creq, i+1);
-		} else if (priv->msg_obj[i] == MSG_OBJ_TX) {
-			iowrite32(CAN_CMASK_RX_TX_GET,
-				&priv->regs->if2_cmask);
-			pch_can_check_if_busy(&priv->regs->if2_creq, i+1);
+		pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, i);
+	}
 
-			/* Resetting DIR bit for reception */
-			iowrite32(0x0, &priv->regs->if2_id1);
-			iowrite32(0x0, &priv->regs->if2_id2);
-			pch_can_bit_set(&priv->regs->if2_id2, CAN_ID2_DIR);
+	for (i = PCH_TX_OBJ_START; i <= PCH_TX_OBJ_END; i++) {
+		iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[1].cmask);
+		pch_can_rw_msg_obj(&priv->regs->ifregs[1].creq, i);
 
-			/* Setting EOB bit for transmitter */
-			iowrite32(CAN_IF_MCONT_EOB, &priv->regs->if2_mcont);
+		/* Resetting DIR bit for reception */
+		iowrite32(0x0, &priv->regs->ifregs[1].id1);
+		iowrite32(PCH_ID2_DIR, &priv->regs->ifregs[1].id2);
 
-			pch_can_bit_set(&priv->regs->if2_mcont,
-					CAN_IF_MCONT_UMASK);
+		/* Setting EOB bit for transmitter */
+		iowrite32(PCH_IF_MCONT_EOB | PCH_IF_MCONT_UMASK,
+			  &priv->regs->ifregs[1].mcont);
 
-			iowrite32(0, &priv->regs->if2_mask1);
-			pch_can_bit_clear(&priv->regs->if2_mask2, 0x1fff);
+		iowrite32(0, &priv->regs->ifregs[1].mask1);
+		pch_can_bit_clear(&priv->regs->ifregs[1].mask2, 0x1fff);
 
-			/* Setting CMASK for writing */
-			iowrite32(CAN_CMASK_RDWR | CAN_CMASK_MASK |
-				  CAN_CMASK_ARB | CAN_CMASK_CTRL,
-				  &priv->regs->if2_cmask);
+		/* Setting CMASK for writing */
+		iowrite32(PCH_CMASK_RDWR | PCH_CMASK_MASK | PCH_CMASK_ARB |
+			  PCH_CMASK_CTRL, &priv->regs->ifregs[1].cmask);
 
-			pch_can_check_if_busy(&priv->regs->if2_creq, i+1);
-		}
+		pch_can_rw_msg_obj(&priv->regs->ifregs[1].creq, i);
 	}
-	spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
 }
 
 static void pch_can_init(struct pch_can_priv *priv)
@@ -605,7 +420,7 @@ static void pch_can_init(struct pch_can_priv *priv)
 	pch_can_set_run_mode(priv, PCH_CAN_STOP);
 
 	/* Clearing all the message object buffers. */
-	pch_can_clear_buffers(priv);
+	pch_can_clear_if_buffers(priv);
 
 	/* Configuring the respective message object as either rx/tx object. */
 	pch_can_config_rx_tx_buffers(priv);
@@ -623,57 +438,47 @@ static void pch_can_release(struct pch_can_priv *priv)
 	pch_can_set_int_enables(priv, PCH_CAN_NONE);
 
 	/* Disabling all the receive object. */
-	pch_can_rx_disable_all(priv);
+	pch_can_set_rx_all(priv, 0);
 
 	/* Disabling all the transmit object. */
-	pch_can_tx_disable_all(priv);
+	pch_can_set_tx_all(priv, 0);
 }
 
 /* This function clears interrupt(s) from the CAN device. */
 static void pch_can_int_clr(struct pch_can_priv *priv, u32 mask)
 {
-	if (mask == CAN_STATUS_INT) {
-		ioread32(&priv->regs->stat);
-		return;
-	}
-
 	/* Clear interrupt for transmit object */
-	if (priv->msg_obj[mask - 1] == MSG_OBJ_TX) {
-		/* Setting CMASK for clearing interrupts for
-					 frame transmission. */
-		iowrite32(CAN_CMASK_RDWR | CAN_CMASK_CTRL | CAN_CMASK_ARB,
-			  &priv->regs->if2_cmask);
-
-		/* Resetting the ID registers. */
-		pch_can_bit_set(&priv->regs->if2_id2,
-			       CAN_ID2_DIR | (0x7ff << 2));
-		iowrite32(0x0, &priv->regs->if2_id1);
-
-		/* Claring NewDat, TxRqst & IntPnd */
-		pch_can_bit_clear(&priv->regs->if2_mcont,
-				  CAN_IF_MCONT_NEWDAT | CAN_IF_MCONT_INTPND |
-				  CAN_IF_MCONT_TXRQXT);
-		pch_can_check_if_busy(&priv->regs->if2_creq, mask);
-	} else if (priv->msg_obj[mask - 1] == MSG_OBJ_RX) {
+	if ((mask >= PCH_RX_OBJ_START) && (mask <= PCH_RX_OBJ_END)) {
 		/* Setting CMASK for clearing the reception interrupts. */
-		iowrite32(CAN_CMASK_RDWR | CAN_CMASK_CTRL | CAN_CMASK_ARB,
-			  &priv->regs->if1_cmask);
+		iowrite32(PCH_CMASK_RDWR | PCH_CMASK_CTRL | PCH_CMASK_ARB,
+			  &priv->regs->ifregs[0].cmask);
 
 		/* Clearing the Dir bit. */
-		pch_can_bit_clear(&priv->regs->if1_id2, CAN_ID2_DIR);
+		pch_can_bit_clear(&priv->regs->ifregs[0].id2, PCH_ID2_DIR);
 
 		/* Clearing NewDat & IntPnd */
-		pch_can_bit_clear(&priv->regs->if1_mcont,
-				  CAN_IF_MCONT_NEWDAT | CAN_IF_MCONT_INTPND);
+		pch_can_bit_clear(&priv->regs->ifregs[0].mcont,
+				  PCH_IF_MCONT_NEWDAT | PCH_IF_MCONT_INTPND);
 
-		pch_can_check_if_busy(&priv->regs->if1_creq, mask);
-	}
-}
+		pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, mask);
+	} else if ((mask >= PCH_TX_OBJ_START) && (mask <= PCH_TX_OBJ_END)) {
+		/*
+		 * Setting CMASK for clearing interrupts for frame transmission.
+		 */
+		iowrite32(PCH_CMASK_RDWR | PCH_CMASK_CTRL | PCH_CMASK_ARB,
+			  &priv->regs->ifregs[1].cmask);
 
-static int pch_can_get_buffer_status(struct pch_can_priv *priv)
-{
-	return (ioread32(&priv->regs->treq1) & 0xffff) |
-	       ((ioread32(&priv->regs->treq2) & 0xffff) << 16);
+		/* Resetting the ID registers. */
+		pch_can_bit_set(&priv->regs->ifregs[1].id2,
+			       PCH_ID2_DIR | (0x7ff << 2));
+		iowrite32(0x0, &priv->regs->ifregs[1].id1);
+
+		/* Claring NewDat, TxRqst & IntPnd */
+		pch_can_bit_clear(&priv->regs->ifregs[1].mcont,
+				  PCH_IF_MCONT_NEWDAT | PCH_IF_MCONT_INTPND |
+				  PCH_IF_MCONT_TXRQXT);
+		pch_can_rw_msg_obj(&priv->regs->ifregs[1].creq, mask);
+	}
 }
 
 static void pch_can_reset(struct pch_can_priv *priv)
@@ -688,7 +493,7 @@ static void pch_can_error(struct net_device *ndev, u32 status)
 	struct sk_buff *skb;
 	struct pch_can_priv *priv = netdev_priv(ndev);
 	struct can_frame *cf;
-	u32 errc;
+	u32 errc, lec;
 	struct net_device_stats *stats = &(priv->ndev->stats);
 	enum can_state state = priv->can.state;
 
@@ -697,26 +502,24 @@ static void pch_can_error(struct net_device *ndev, u32 status)
 		return;
 
 	if (status & PCH_BUS_OFF) {
-		pch_can_tx_disable_all(priv);
-		pch_can_rx_disable_all(priv);
+		pch_can_set_tx_all(priv, 0);
+		pch_can_set_rx_all(priv, 0);
 		state = CAN_STATE_BUS_OFF;
 		cf->can_id |= CAN_ERR_BUSOFF;
 		can_bus_off(ndev);
-		pch_can_set_run_mode(priv, PCH_CAN_RUN);
-		dev_err(&ndev->dev, "%s -> Bus Off occurres.\n", __func__);
 	}
 
+	errc = ioread32(&priv->regs->errc);
 	/* Warning interrupt. */
 	if (status & PCH_EWARN) {
 		state = CAN_STATE_ERROR_WARNING;
 		priv->can.can_stats.error_warning++;
 		cf->can_id |= CAN_ERR_CRTL;
-		errc = ioread32(&priv->regs->errc);
-		if (((errc & CAN_REC) >> 8) > 96)
+		if (((errc & PCH_REC) >> 8) > 96)
 			cf->data[1] |= CAN_ERR_CRTL_RX_WARNING;
-		if ((errc & CAN_TEC) > 96)
+		if ((errc & PCH_TEC) > 96)
 			cf->data[1] |= CAN_ERR_CRTL_TX_WARNING;
-		dev_warn(&ndev->dev,
+		netdev_dbg(ndev,
 			"%s -> Error Counter is more than 96.\n", __func__);
 	}
 	/* Error passive interrupt. */
@@ -724,46 +527,52 @@ static void pch_can_error(struct net_device *ndev, u32 status)
 		priv->can.can_stats.error_passive++;
 		state = CAN_STATE_ERROR_PASSIVE;
 		cf->can_id |= CAN_ERR_CRTL;
-		errc = ioread32(&priv->regs->errc);
-		if (((errc & CAN_REC) >> 8) > 127)
+		if (((errc & PCH_REC) >> 8) > 127)
 			cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
-		if ((errc & CAN_TEC) > 127)
+		if ((errc & PCH_TEC) > 127)
 			cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
-		dev_err(&ndev->dev,
+		netdev_dbg(ndev,
 			"%s -> CAN controller is ERROR PASSIVE .\n", __func__);
 	}
 
-	if (status & PCH_LEC_ALL) {
+	lec = status & PCH_LEC_ALL;
+	switch (lec) {
+	case PCH_STUF_ERR:
+		cf->data[2] |= CAN_ERR_PROT_STUFF;
 		priv->can.can_stats.bus_error++;
 		stats->rx_errors++;
-		switch (status & PCH_LEC_ALL) {
-		case PCH_STUF_ERR:
-			cf->data[2] |= CAN_ERR_PROT_STUFF;
-			break;
-		case PCH_FORM_ERR:
-			cf->data[2] |= CAN_ERR_PROT_FORM;
-			break;
-		case PCH_ACK_ERR:
-			cf->data[2] |= CAN_ERR_PROT_LOC_ACK |
-				       CAN_ERR_PROT_LOC_ACK_DEL;
-			break;
-		case PCH_BIT1_ERR:
-		case PCH_BIT0_ERR:
-			cf->data[2] |= CAN_ERR_PROT_BIT;
-			break;
-		case PCH_CRC_ERR:
-			cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ |
-				       CAN_ERR_PROT_LOC_CRC_DEL;
-			break;
-		default:
-			iowrite32(status | PCH_LEC_ALL, &priv->regs->stat);
-			break;
-		}
-
+		break;
+	case PCH_FORM_ERR:
+		cf->data[2] |= CAN_ERR_PROT_FORM;
+		priv->can.can_stats.bus_error++;
+		stats->rx_errors++;
+		break;
+	case PCH_ACK_ERR:
+		cf->can_id |= CAN_ERR_ACK;
+		priv->can.can_stats.bus_error++;
+		stats->rx_errors++;
+		break;
+	case PCH_BIT1_ERR:
+	case PCH_BIT0_ERR:
+		cf->data[2] |= CAN_ERR_PROT_BIT;
+		priv->can.can_stats.bus_error++;
+		stats->rx_errors++;
+		break;
+	case PCH_CRC_ERR:
+		cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ |
+			       CAN_ERR_PROT_LOC_CRC_DEL;
+		priv->can.can_stats.bus_error++;
+		stats->rx_errors++;
+		break;
+	case PCH_LEC_ALL: /* Written by CPU. No error status */
+		break;
 	}
 
+	cf->data[6] = errc & PCH_TEC;
+	cf->data[7] = (errc & PCH_REC) >> 8;
+
 	priv->can.state = state;
-	netif_rx(skb);
+	netif_receive_skb(skb);
 
 	stats->rx_packets++;
 	stats->rx_bytes += cf->can_dlc;
@@ -774,204 +583,202 @@ static irqreturn_t pch_can_interrupt(int irq, void *dev_id)
 	struct net_device *ndev = (struct net_device *)dev_id;
 	struct pch_can_priv *priv = netdev_priv(ndev);
 
-	pch_can_set_int_enables(priv, PCH_CAN_NONE);
+	if (!pch_can_int_pending(priv))
+		return IRQ_NONE;
 
+	pch_can_set_int_enables(priv, PCH_CAN_NONE);
 	napi_schedule(&priv->napi);
-
 	return IRQ_HANDLED;
 }
 
-static int pch_can_rx_normal(struct net_device *ndev, u32 int_stat)
+static void pch_fifo_thresh(struct pch_can_priv *priv, int obj_id)
+{
+	if (obj_id < PCH_FIFO_THRESH) {
+		iowrite32(PCH_CMASK_RDWR | PCH_CMASK_CTRL |
+			  PCH_CMASK_ARB, &priv->regs->ifregs[0].cmask);
+
+		/* Clearing the Dir bit. */
+		pch_can_bit_clear(&priv->regs->ifregs[0].id2, PCH_ID2_DIR);
+
+		/* Clearing NewDat & IntPnd */
+		pch_can_bit_clear(&priv->regs->ifregs[0].mcont,
+				  PCH_IF_MCONT_INTPND);
+		pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_id);
+	} else if (obj_id > PCH_FIFO_THRESH) {
+		pch_can_int_clr(priv, obj_id);
+	} else if (obj_id == PCH_FIFO_THRESH) {
+		int cnt;
+		for (cnt = 0; cnt < PCH_FIFO_THRESH; cnt++)
+			pch_can_int_clr(priv, cnt + 1);
+	}
+}
+
+static void pch_can_rx_msg_lost(struct net_device *ndev, int obj_id)
+{
+	struct pch_can_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &(priv->ndev->stats);
+	struct sk_buff *skb;
+	struct can_frame *cf;
+
+	netdev_dbg(priv->ndev, "Msg Obj is overwritten.\n");
+	pch_can_bit_clear(&priv->regs->ifregs[0].mcont,
+			  PCH_IF_MCONT_MSGLOST);
+	iowrite32(PCH_CMASK_RDWR | PCH_CMASK_CTRL,
+		  &priv->regs->ifregs[0].cmask);
+	pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_id);
+
+	skb = alloc_can_err_skb(ndev, &cf);
+	if (!skb)
+		return;
+
+	cf->can_id |= CAN_ERR_CRTL;
+	cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+	stats->rx_over_errors++;
+	stats->rx_errors++;
+
+	netif_receive_skb(skb);
+}
+
+static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota)
 {
 	u32 reg;
 	canid_t id;
-	u32 ide;
-	u32 rtr;
-	int i, j, k;
 	int rcv_pkts = 0;
 	struct sk_buff *skb;
 	struct can_frame *cf;
 	struct pch_can_priv *priv = netdev_priv(ndev);
 	struct net_device_stats *stats = &(priv->ndev->stats);
+	int i;
+	u32 id2;
+	u16 data_reg;
+
+	do {
+		/* Reading the messsage object from the Message RAM */
+		iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
+		pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num);
 
-	/* Reading the messsage object from the Message RAM */
-	iowrite32(CAN_CMASK_RX_TX_GET, &priv->regs->if1_cmask);
-	pch_can_check_if_busy(&priv->regs->if1_creq, int_stat);
+		/* Reading the MCONT register. */
+		reg = ioread32(&priv->regs->ifregs[0].mcont);
 
-	/* Reading the MCONT register. */
-	reg = ioread32(&priv->regs->if1_mcont);
-	reg &= 0xffff;
+		if (reg & PCH_IF_MCONT_EOB)
+			break;
 
-	for (k = int_stat; !(reg & CAN_IF_MCONT_EOB); k++) {
 		/* If MsgLost bit set. */
-		if (reg & CAN_IF_MCONT_MSGLOST) {
-			dev_err(&priv->ndev->dev, "Msg Obj is overwritten.\n");
-			pch_can_bit_clear(&priv->regs->if1_mcont,
-					  CAN_IF_MCONT_MSGLOST);
-			iowrite32(CAN_CMASK_RDWR | CAN_CMASK_CTRL,
-				  &priv->regs->if1_cmask);
-			pch_can_check_if_busy(&priv->regs->if1_creq, k);
-
-			skb = alloc_can_err_skb(ndev, &cf);
-			if (!skb)
-				return -ENOMEM;
-
-			priv->can.can_stats.error_passive++;
-			priv->can.state = CAN_STATE_ERROR_PASSIVE;
-			cf->can_id |= CAN_ERR_CRTL;
-			cf->data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
-			cf->data[2] |= CAN_ERR_PROT_OVERLOAD;
-			stats->rx_packets++;
-			stats->rx_bytes += cf->can_dlc;
-
-			netif_receive_skb(skb);
+		if (reg & PCH_IF_MCONT_MSGLOST) {
+			pch_can_rx_msg_lost(ndev, obj_num);
 			rcv_pkts++;
-			goto RX_NEXT;
+			quota--;
+			obj_num++;
+			continue;
+		} else if (!(reg & PCH_IF_MCONT_NEWDAT)) {
+			obj_num++;
+			continue;
 		}
-		if (!(reg & CAN_IF_MCONT_NEWDAT))
-			goto RX_NEXT;
 
 		skb = alloc_can_skb(priv->ndev, &cf);
-		if (!skb)
-			return -ENOMEM;
+		if (!skb) {
+			netdev_err(ndev, "alloc_can_skb Failed\n");
+			return rcv_pkts;
+		}
 
 		/* Get Received data */
-		ide = ((ioread32(&priv->regs->if1_id2)) & CAN_ID2_XTD) >> 14;
-		if (ide) {
-			id = (ioread32(&priv->regs->if1_id1) & 0xffff);
-			id |= (((ioread32(&priv->regs->if1_id2)) &
-					    0x1fff) << 16);
-			cf->can_id = (id & CAN_EFF_MASK) | CAN_EFF_FLAG;
+		id2 = ioread32(&priv->regs->ifregs[0].id2);
+		if (id2 & PCH_ID2_XTD) {
+			id = (ioread32(&priv->regs->ifregs[0].id1) & 0xffff);
+			id |= (((id2) & 0x1fff) << 16);
+			cf->can_id = id | CAN_EFF_FLAG;
 		} else {
-			id = (((ioread32(&priv->regs->if1_id2)) &
-					  (CAN_SFF_MASK << 2)) >> 2);
-			cf->can_id = (id & CAN_SFF_MASK);
+			id = (id2 >> 2) & CAN_SFF_MASK;
+			cf->can_id = id;
 		}
 
-		rtr = (ioread32(&priv->regs->if1_id2) &  CAN_ID2_DIR);
-		if (rtr) {
-			cf->can_dlc = 0;
+		if (id2 & PCH_ID2_DIR)
 			cf->can_id |= CAN_RTR_FLAG;
-		} else {
-			cf->can_dlc = ((ioread32(&priv->regs->if1_mcont)) &
-						   0x0f);
-		}
 
-		for (i = 0, j = 0; i < cf->can_dlc; j++) {
-			reg = ioread32(&priv->regs->if1_dataa1 + j*4);
-			cf->data[i++] = cpu_to_le32(reg & 0xff);
-			if (i == cf->can_dlc)
-				break;
-			cf->data[i++] = cpu_to_le32((reg >> 8) & 0xff);
+		cf->can_dlc = get_can_dlc((ioread32(&priv->regs->
+						    ifregs[0].mcont)) & 0xF);
+
+		for (i = 0; i < cf->can_dlc; i += 2) {
+			data_reg = ioread16(&priv->regs->ifregs[0].data[i / 2]);
+			cf->data[i] = data_reg;
+			cf->data[i + 1] = data_reg >> 8;
 		}
 
 		netif_receive_skb(skb);
 		rcv_pkts++;
 		stats->rx_packets++;
+		quota--;
 		stats->rx_bytes += cf->can_dlc;
 
-		if (k < PCH_FIFO_THRESH) {
-			iowrite32(CAN_CMASK_RDWR | CAN_CMASK_CTRL |
-				  CAN_CMASK_ARB, &priv->regs->if1_cmask);
-
-			/* Clearing the Dir bit. */
-			pch_can_bit_clear(&priv->regs->if1_id2, CAN_ID2_DIR);
-
-			/* Clearing NewDat & IntPnd */
-			pch_can_bit_clear(&priv->regs->if1_mcont,
-					  CAN_IF_MCONT_INTPND);
-			pch_can_check_if_busy(&priv->regs->if1_creq, k);
-		} else if (k > PCH_FIFO_THRESH) {
-			pch_can_int_clr(priv, k);
-		} else if (k == PCH_FIFO_THRESH) {
-			int cnt;
-			for (cnt = 0; cnt < PCH_FIFO_THRESH; cnt++)
-				pch_can_int_clr(priv, cnt+1);
-		}
-RX_NEXT:
-		/* Reading the messsage object from the Message RAM */
-		iowrite32(CAN_CMASK_RX_TX_GET, &priv->regs->if1_cmask);
-		pch_can_check_if_busy(&priv->regs->if1_creq, k + 1);
-		reg = ioread32(&priv->regs->if1_mcont);
-	}
+		pch_fifo_thresh(priv, obj_num);
+		obj_num++;
+	} while (quota > 0);
 
 	return rcv_pkts;
 }
-static int pch_can_rx_poll(struct napi_struct *napi, int quota)
+
+static void pch_can_tx_complete(struct net_device *ndev, u32 int_stat)
 {
-	struct net_device *ndev = napi->dev;
 	struct pch_can_priv *priv = netdev_priv(ndev);
 	struct net_device_stats *stats = &(priv->ndev->stats);
 	u32 dlc;
+
+	can_get_echo_skb(ndev, int_stat - PCH_RX_OBJ_END - 1);
+	iowrite32(PCH_CMASK_RX_TX_GET | PCH_CMASK_CLRINTPND,
+		  &priv->regs->ifregs[1].cmask);
+	pch_can_rw_msg_obj(&priv->regs->ifregs[1].creq, int_stat);
+	dlc = get_can_dlc(ioread32(&priv->regs->ifregs[1].mcont) &
+			  PCH_IF_MCONT_DLC);
+	stats->tx_bytes += dlc;
+	stats->tx_packets++;
+	if (int_stat == PCH_TX_OBJ_END)
+		netif_wake_queue(ndev);
+}
+
+static int pch_can_poll(struct napi_struct *napi, int quota)
+{
+	struct net_device *ndev = napi->dev;
+	struct pch_can_priv *priv = netdev_priv(ndev);
 	u32 int_stat;
-	int rcv_pkts = 0;
 	u32 reg_stat;
-	unsigned long flags;
+	int quota_save = quota;
 
 	int_stat = pch_can_int_pending(priv);
 	if (!int_stat)
-		return 0;
+		goto end;
 
-INT_STAT:
-	if (int_stat == CAN_STATUS_INT) {
+	if (int_stat == PCH_STATUS_INT) {
 		reg_stat = ioread32(&priv->regs->stat);
-		if (reg_stat & (PCH_BUS_OFF | PCH_LEC_ALL)) {
-			if ((reg_stat & PCH_LEC_ALL) != PCH_LEC_ALL)
-				pch_can_error(ndev, reg_stat);
-		}
 
-		if (reg_stat & PCH_TX_OK) {
-			spin_lock_irqsave(&priv->msgif_reg_lock, flags);
-			iowrite32(CAN_CMASK_RX_TX_GET, &priv->regs->if2_cmask);
-			pch_can_check_if_busy(&priv->regs->if2_creq,
-					       ioread32(&priv->regs->intr));
-			spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
-			pch_can_bit_clear(&priv->regs->stat, PCH_TX_OK);
+		if ((reg_stat & (PCH_BUS_OFF | PCH_LEC_ALL)) &&
+		   ((reg_stat & PCH_LEC_ALL) != PCH_LEC_ALL)) {
+			pch_can_error(ndev, reg_stat);
+			quota--;
 		}
 
-		if (reg_stat & PCH_RX_OK)
-			pch_can_bit_clear(&priv->regs->stat, PCH_RX_OK);
+		if (reg_stat & (PCH_TX_OK | PCH_RX_OK))
+			pch_can_bit_clear(&priv->regs->stat,
+					  reg_stat & (PCH_TX_OK | PCH_RX_OK));
 
 		int_stat = pch_can_int_pending(priv);
-		if (int_stat == CAN_STATUS_INT)
-			goto INT_STAT;
 	}
 
-MSG_OBJ:
-	if ((int_stat >= 1) && (int_stat <= PCH_RX_OBJ_NUM)) {
-		spin_lock_irqsave(&priv->msgif_reg_lock, flags);
-		rcv_pkts = pch_can_rx_normal(ndev, int_stat);
-		spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
-		if (rcv_pkts < 0)
-			return 0;
-	} else if ((int_stat > PCH_RX_OBJ_NUM) && (int_stat <= PCH_OBJ_NUM)) {
-		if (priv->msg_obj[int_stat - 1] == MSG_OBJ_TX) {
-			/* Handle transmission interrupt */
-			can_get_echo_skb(ndev, int_stat - PCH_RX_OBJ_NUM - 1);
-			spin_lock_irqsave(&priv->msgif_reg_lock, flags);
-			iowrite32(CAN_CMASK_RX_TX_GET | CAN_CMASK_CLRINTPND,
-				  &priv->regs->if2_cmask);
-			dlc = ioread32(&priv->regs->if2_mcont) &
-				       CAN_IF_MCONT_DLC;
-			pch_can_check_if_busy(&priv->regs->if2_creq, int_stat);
-			spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
-			if (dlc > 8)
-				dlc = 8;
-			stats->tx_bytes += dlc;
-			stats->tx_packets++;
-		}
-	}
+	if (quota == 0)
+		goto end;
 
-	int_stat = pch_can_int_pending(priv);
-	if (int_stat == CAN_STATUS_INT)
-		goto INT_STAT;
-	else if (int_stat >= 1 && int_stat <= 32)
-		goto MSG_OBJ;
+	if ((int_stat >= PCH_RX_OBJ_START) && (int_stat <= PCH_RX_OBJ_END)) {
+		quota -= pch_can_rx_normal(ndev, int_stat, quota);
+	} else if ((int_stat >= PCH_TX_OBJ_START) &&
+		   (int_stat <= PCH_TX_OBJ_END)) {
+		/* Handle transmission interrupt */
+		pch_can_tx_complete(ndev, int_stat);
+	}
 
+end:
 	napi_complete(napi);
 	pch_can_set_int_enables(priv, PCH_CAN_ALL);
 
-	return rcv_pkts;
+	return quota_save - quota;
 }
 
 static int pch_set_bittiming(struct net_device *ndev)
@@ -980,20 +787,18 @@ static int pch_set_bittiming(struct net_device *ndev)
 	const struct can_bittiming *bt = &priv->can.bittiming;
 	u32 canbit;
 	u32 bepe;
-	u32 brp;
 
 	/* Setting the CCE bit for accessing the Can Timing register. */
-	pch_can_bit_set(&priv->regs->cont, CAN_CTRL_CCE);
-
-	brp = (bt->tq) / (1000000000/PCH_CAN_CLK) - 1;
-	canbit = brp & MSK_BITT_BRP;
-	canbit |= (bt->sjw - 1) << BIT_BITT_SJW;
-	canbit |= (bt->phase_seg1 + bt->prop_seg - 1) << BIT_BITT_TSEG1;
-	canbit |= (bt->phase_seg2 - 1) << BIT_BITT_TSEG2;
-	bepe = (brp & MSK_BRPE_BRPE) >> BIT_BRPE_BRPE;
+	pch_can_bit_set(&priv->regs->cont, PCH_CTRL_CCE);
+
+	canbit = (bt->brp - 1) & PCH_MSK_BITT_BRP;
+	canbit |= (bt->sjw - 1) << PCH_BIT_SJW_SHIFT;
+	canbit |= (bt->phase_seg1 + bt->prop_seg - 1) << PCH_BIT_TSEG1_SHIFT;
+	canbit |= (bt->phase_seg2 - 1) << PCH_BIT_TSEG2_SHIFT;
+	bepe = ((bt->brp - 1) & PCH_MSK_BRPE_BRPE) >> PCH_BIT_BRPE_BRPE_SHIFT;
 	iowrite32(canbit, &priv->regs->bitt);
 	iowrite32(bepe, &priv->regs->brpe);
-	pch_can_bit_clear(&priv->regs->cont, CAN_CTRL_CCE);
+	pch_can_bit_clear(&priv->regs->cont, PCH_CTRL_CCE);
 
 	return 0;
 }
@@ -1008,8 +813,8 @@ static void pch_can_start(struct net_device *ndev)
 	pch_set_bittiming(ndev);
 	pch_can_set_optmode(priv);
 
-	pch_can_tx_enable_all(priv);
-	pch_can_rx_enable_all(priv);
+	pch_can_set_tx_all(priv, 1);
+	pch_can_set_rx_all(priv, 1);
 
 	/* Setting the CAN to run mode. */
 	pch_can_set_run_mode(priv, PCH_CAN_RUN);
@@ -1041,27 +846,18 @@ static int pch_can_open(struct net_device *ndev)
 	struct pch_can_priv *priv = netdev_priv(ndev);
 	int retval;
 
-	retval = pci_enable_msi(priv->dev);
-	if (retval) {
-		dev_info(&ndev->dev, "PCH CAN opened without MSI\n");
-		priv->use_msi = 0;
-	} else {
-		dev_info(&ndev->dev, "PCH CAN opened with MSI\n");
-		priv->use_msi = 1;
-	}
-
-	/* Regsitering the interrupt. */
+	/* Regstering the interrupt. */
 	retval = request_irq(priv->dev->irq, pch_can_interrupt, IRQF_SHARED,
 			     ndev->name, ndev);
 	if (retval) {
-		dev_err(&ndev->dev, "request_irq failed.\n");
+		netdev_err(ndev, "request_irq failed.\n");
 		goto req_irq_err;
 	}
 
 	/* Open common can device */
 	retval = open_candev(ndev);
 	if (retval) {
-		dev_err(ndev->dev.parent, "open_candev() failed %d\n", retval);
+		netdev_err(ndev, "open_candev() failed %d\n", retval);
 		goto err_open_candev;
 	}
 
@@ -1075,9 +871,6 @@ static int pch_can_open(struct net_device *ndev)
 err_open_candev:
 	free_irq(priv->dev->irq, ndev);
 req_irq_err:
-	if (priv->use_msi)
-		pci_disable_msi(priv->dev);
-
 	pch_can_release(priv);
 
 	return retval;
@@ -1091,102 +884,65 @@ static int pch_close(struct net_device *ndev)
 	napi_disable(&priv->napi);
 	pch_can_release(priv);
 	free_irq(priv->dev->irq, ndev);
-	if (priv->use_msi)
-		pci_disable_msi(priv->dev);
 	close_candev(ndev);
 	priv->can.state = CAN_STATE_STOPPED;
 	return 0;
 }
 
-static int pch_get_msg_obj_sts(struct net_device *ndev, u32 obj_id)
-{
-	u32 buffer_status = 0;
-	struct pch_can_priv *priv = netdev_priv(ndev);
-
-	/* Getting the message object status. */
-	buffer_status = (u32) pch_can_get_buffer_status(priv);
-
-	return buffer_status & obj_id;
-}
-
-
 static netdev_tx_t pch_xmit(struct sk_buff *skb, struct net_device *ndev)
 {
-	int i, j;
-	unsigned long flags;
 	struct pch_can_priv *priv = netdev_priv(ndev);
 	struct can_frame *cf = (struct can_frame *)skb->data;
-	int tx_buffer_avail = 0;
+	int tx_obj_no;
+	int i;
+	u32 id2;
 
 	if (can_dropped_invalid_skb(ndev, skb))
 		return NETDEV_TX_OK;
 
-	if (priv->tx_obj == (PCH_OBJ_NUM + 1)) { /* Point tail Obj */
-		while (pch_get_msg_obj_sts(ndev, (((1 << PCH_TX_OBJ_NUM)-1) <<
-					   PCH_RX_OBJ_NUM)))
-			udelay(500);
+	tx_obj_no = priv->tx_obj;
+	if (priv->tx_obj == PCH_TX_OBJ_END) {
+		if (ioread32(&priv->regs->treq2) & PCH_TREQ2_TX_MASK)
+			netif_stop_queue(ndev);
 
-		priv->tx_obj = PCH_RX_OBJ_NUM + 1; /* Point head of Tx Obj ID */
-		tx_buffer_avail = priv->tx_obj; /* Point Tail of Tx Obj */
+		priv->tx_obj = PCH_TX_OBJ_START;
 	} else {
-		tx_buffer_avail = priv->tx_obj;
+		priv->tx_obj++;
 	}
-	priv->tx_obj++;
-
-	/* Attaining the lock. */
-	spin_lock_irqsave(&priv->msgif_reg_lock, flags);
-
-	/* Reading the Msg Obj from the Msg RAM to the Interface register. */
-	iowrite32(CAN_CMASK_RX_TX_GET, &priv->regs->if2_cmask);
-	pch_can_check_if_busy(&priv->regs->if2_creq, tx_buffer_avail);
 
 	/* Setting the CMASK register. */
-	pch_can_bit_set(&priv->regs->if2_cmask, CAN_CMASK_ALL);
+	pch_can_bit_set(&priv->regs->ifregs[1].cmask, PCH_CMASK_ALL);
 
 	/* If ID extended is set. */
-	pch_can_bit_clear(&priv->regs->if2_id1, 0xffff);
-	pch_can_bit_clear(&priv->regs->if2_id2, 0x1fff | CAN_ID2_XTD);
 	if (cf->can_id & CAN_EFF_FLAG) {
-		pch_can_bit_set(&priv->regs->if2_id1, cf->can_id & 0xffff);
-		pch_can_bit_set(&priv->regs->if2_id2,
-				((cf->can_id >> 16) & 0x1fff) | CAN_ID2_XTD);
+		iowrite32(cf->can_id & 0xffff, &priv->regs->ifregs[1].id1);
+		id2 = ((cf->can_id >> 16) & 0x1fff) | PCH_ID2_XTD;
 	} else {
-		pch_can_bit_set(&priv->regs->if2_id1, 0);
-		pch_can_bit_set(&priv->regs->if2_id2,
-				(cf->can_id & CAN_SFF_MASK) << 2);
+		iowrite32(0, &priv->regs->ifregs[1].id1);
+		id2 = (cf->can_id & CAN_SFF_MASK) << 2;
 	}
 
-	/* If remote frame has to be transmitted.. */
-	if (cf->can_id & CAN_RTR_FLAG)
-		pch_can_bit_clear(&priv->regs->if2_id2, CAN_ID2_DIR);
+	id2 |= PCH_ID_MSGVAL;
 
-	for (i = 0, j = 0; i < cf->can_dlc; j++) {
-		iowrite32(le32_to_cpu(cf->data[i++]),
-			 (&priv->regs->if2_dataa1) + j*4);
-		if (i == cf->can_dlc)
-			break;
-		iowrite32(le32_to_cpu(cf->data[i++] << 8),
-			 (&priv->regs->if2_dataa1) + j*4);
-	}
-
-	can_put_echo_skb(skb, ndev, tx_buffer_avail - PCH_RX_OBJ_NUM - 1);
+	/* If remote frame has to be transmitted.. */
+	if (!(cf->can_id & CAN_RTR_FLAG))
+		id2 |= PCH_ID2_DIR;
 
-	/* Updating the size of the data. */
-	pch_can_bit_clear(&priv->regs->if2_mcont, 0x0f);
-	pch_can_bit_set(&priv->regs->if2_mcont, cf->can_dlc);
+	iowrite32(id2, &priv->regs->ifregs[1].id2);
 
-	/* Clearing IntPend, NewDat & TxRqst */
-	pch_can_bit_clear(&priv->regs->if2_mcont,
-			  CAN_IF_MCONT_NEWDAT | CAN_IF_MCONT_INTPND |
-			  CAN_IF_MCONT_TXRQXT);
+	/* Copy data to register */
+	for (i = 0; i < cf->can_dlc; i += 2) {
+		iowrite16(cf->data[i] | (cf->data[i + 1] << 8),
+			  &priv->regs->ifregs[1].data[i / 2]);
+	}
 
-	/* Setting NewDat, TxRqst bits */
-	pch_can_bit_set(&priv->regs->if2_mcont,
-			CAN_IF_MCONT_NEWDAT | CAN_IF_MCONT_TXRQXT);
+	can_put_echo_skb(skb, ndev, tx_obj_no - PCH_RX_OBJ_END - 1);
 
-	pch_can_check_if_busy(&priv->regs->if2_creq, tx_buffer_avail);
+	/* Set the size of the data. Update if2_mcont */
+	iowrite32(cf->can_dlc | PCH_IF_MCONT_NEWDAT | PCH_IF_MCONT_TXRQXT |
+		  PCH_IF_MCONT_TXIE, &priv->regs->ifregs[1].mcont);
 
-	spin_unlock_irqrestore(&priv->msgif_reg_lock, flags);
+	pch_can_rw_msg_obj(&priv->regs->ifregs[1].creq, tx_obj_no);
 
 	return NETDEV_TX_OK;
 }
@@ -1203,21 +959,98 @@ static void __devexit pch_can_remove(struct pci_dev *pdev)
 	struct pch_can_priv *priv = netdev_priv(ndev);
 
 	unregister_candev(priv->ndev);
-	free_candev(priv->ndev);
 	pci_iounmap(pdev, priv->regs);
+	if (priv->use_msi)
+		pci_disable_msi(priv->dev);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
 	pch_can_reset(priv);
+	free_candev(priv->ndev);
 }
 
 #ifdef CONFIG_PM
+static void pch_can_set_int_custom(struct pch_can_priv *priv)
+{
+	/* Clearing the IE, SIE and EIE bits of Can control register. */
+	pch_can_bit_clear(&priv->regs->cont, PCH_CTRL_IE_SIE_EIE);
+
+	/* Appropriately setting them. */
+	pch_can_bit_set(&priv->regs->cont,
+			((priv->int_enables & PCH_MSK_CTRL_IE_SIE_EIE) << 1));
+}
+
+/* This function retrieves interrupt enabled for the CAN device. */
+static u32 pch_can_get_int_enables(struct pch_can_priv *priv)
+{
+	/* Obtaining the status of IE, SIE and EIE interrupt bits. */
+	return (ioread32(&priv->regs->cont) & PCH_CTRL_IE_SIE_EIE) >> 1;
+}
+
+static u32 pch_can_get_rxtx_ir(struct pch_can_priv *priv, u32 buff_num,
+			       enum pch_ifreg dir)
+{
+	u32 ie, enable;
+
+	if (dir)
+		ie = PCH_IF_MCONT_RXIE;
+	else
+		ie = PCH_IF_MCONT_TXIE;
+
+	iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[dir].cmask);
+	pch_can_rw_msg_obj(&priv->regs->ifregs[dir].creq, buff_num);
+
+	if (((ioread32(&priv->regs->ifregs[dir].id2)) & PCH_ID_MSGVAL) &&
+			((ioread32(&priv->regs->ifregs[dir].mcont)) & ie))
+		enable = 1;
+	else
+		enable = 0;
+
+	return enable;
+}
+
+static void pch_can_set_rx_buffer_link(struct pch_can_priv *priv,
+				       u32 buffer_num, int set)
+{
+	iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
+	pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, buffer_num);
+	iowrite32(PCH_CMASK_RDWR | PCH_CMASK_CTRL,
+		  &priv->regs->ifregs[0].cmask);
+	if (set)
+		pch_can_bit_clear(&priv->regs->ifregs[0].mcont,
+				  PCH_IF_MCONT_EOB);
+	else
+		pch_can_bit_set(&priv->regs->ifregs[0].mcont, PCH_IF_MCONT_EOB);
+
+	pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, buffer_num);
+}
+
+static u32 pch_can_get_rx_buffer_link(struct pch_can_priv *priv, u32 buffer_num)
+{
+	u32 link;
+
+	iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
+	pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, buffer_num);
+
+	if (ioread32(&priv->regs->ifregs[0].mcont) & PCH_IF_MCONT_EOB)
+		link = 0;
+	else
+		link = 1;
+	return link;
+}
+
+static int pch_can_get_buffer_status(struct pch_can_priv *priv)
+{
+	return (ioread32(&priv->regs->treq1) & 0xffff) |
+	       (ioread32(&priv->regs->treq2) << 16);
+}
+
 static int pch_can_suspend(struct pci_dev *pdev, pm_message_t state)
 {
-	int i;			/* Counter variable. */
-	int retval;		/* Return value. */
+	int i;
+	int retval;
 	u32 buf_stat;	/* Variable for reading the transmit buffer status. */
-	u32 counter = 0xFFFFFF;
+	int counter = PCH_COUNTER_LIMIT;
 
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct pch_can_priv *priv = netdev_priv(dev);
@@ -1226,7 +1059,7 @@ static int pch_can_suspend(struct pci_dev *pdev, pm_message_t state)
 	pch_can_set_run_mode(priv, PCH_CAN_STOP);
 
 	/* Indicate that we are aboutto/in suspend */
-	priv->can.state = CAN_STATE_SLEEPING;
+	priv->can.state = CAN_STATE_STOPPED;
 
 	/* Waiting for all transmission to complete. */
 	while (counter) {
@@ -1240,31 +1073,26 @@ static int pch_can_suspend(struct pci_dev *pdev, pm_message_t state)
 		dev_err(&pdev->dev, "%s -> Transmission time out.\n", __func__);
 
 	/* Save interrupt configuration and then disable them */
-	pch_can_get_int_enables(priv, &(priv->int_enables));
+	priv->int_enables = pch_can_get_int_enables(priv);
 	pch_can_set_int_enables(priv, PCH_CAN_DISABLE);
 
 	/* Save Tx buffer enable state */
-	for (i = 0; i < PCH_OBJ_NUM; i++) {
-		if (priv->msg_obj[i] == MSG_OBJ_TX)
-			pch_can_get_tx_enable(priv, i + 1,
-					      &(priv->tx_enable[i]));
-	}
+	for (i = PCH_TX_OBJ_START; i <= PCH_TX_OBJ_END; i++)
+		priv->tx_enable[i - 1] = pch_can_get_rxtx_ir(priv, i,
+							     PCH_TX_IFREG);
 
 	/* Disable all Transmit buffers */
-	pch_can_tx_disable_all(priv);
+	pch_can_set_tx_all(priv, 0);
 
 	/* Save Rx buffer enable state */
-	for (i = 0; i < PCH_OBJ_NUM; i++) {
-		if (priv->msg_obj[i] == MSG_OBJ_RX) {
-			pch_can_get_rx_enable(priv, i + 1,
-						&(priv->rx_enable[i]));
-			pch_can_get_rx_buffer_link(priv, i + 1,
-						&(priv->rx_link[i]));
-		}
+	for (i = PCH_RX_OBJ_START; i <= PCH_RX_OBJ_END; i++) {
+		priv->rx_enable[i - 1] = pch_can_get_rxtx_ir(priv, i,
+							     PCH_RX_IFREG);
+		priv->rx_link[i - 1] = pch_can_get_rx_buffer_link(priv, i);
 	}
 
 	/* Disable all Receive buffers */
-	pch_can_rx_disable_all(priv);
+	pch_can_set_rx_all(priv, 0);
 	retval = pci_save_state(pdev);
 	if (retval) {
 		dev_err(&pdev->dev, "pci_save_state failed.\n");
@@ -1279,8 +1107,8 @@ static int pch_can_suspend(struct pci_dev *pdev, pm_message_t state)
 
 static int pch_can_resume(struct pci_dev *pdev)
 {
-	int i;			/* Counter variable. */
-	int retval;		/* Return variable. */
+	int i;
+	int retval;
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct pch_can_priv *priv = netdev_priv(dev);
 
@@ -1312,23 +1140,16 @@ static int pch_can_resume(struct pci_dev *pdev)
 	pch_can_set_optmode(priv);
 
 	/* Enabling the transmit buffer. */
-	for (i = 0; i < PCH_OBJ_NUM; i++) {
-		if (priv->msg_obj[i] == MSG_OBJ_TX) {
-			pch_can_set_tx_enable(priv, i + 1,
-					      priv->tx_enable[i]);
-		}
-	}
+	for (i = PCH_TX_OBJ_START; i <= PCH_TX_OBJ_END; i++)
+		pch_can_set_rxtx(priv, i, priv->tx_enable[i - 1], PCH_TX_IFREG);
 
 	/* Configuring the receive buffer and enabling them. */
-	for (i = 0; i < PCH_OBJ_NUM; i++) {
-		if (priv->msg_obj[i] == MSG_OBJ_RX) {
-			/* Restore buffer link */
-			pch_can_set_rx_buffer_link(priv, i + 1,
-						   priv->rx_link[i]);
-
-			/* Restore buffer enables */
-			pch_can_set_rx_enable(priv, i + 1, priv->rx_enable[i]);
-		}
+	for (i = PCH_RX_OBJ_START; i <= PCH_RX_OBJ_END; i++) {
+		/* Restore buffer link */
+		pch_can_set_rx_buffer_link(priv, i, priv->rx_link[i - 1]);
+
+		/* Restore buffer enables */
+		pch_can_set_rxtx(priv, i, priv->rx_enable[i - 1], PCH_RX_IFREG);
 	}
 
 	/* Enable CAN Interrupts */
@@ -1348,9 +1169,10 @@ static int pch_can_get_berr_counter(const struct net_device *dev,
 				    struct can_berr_counter *bec)
 {
 	struct pch_can_priv *priv = netdev_priv(dev);
+	u32 errc = ioread32(&priv->regs->errc);
 
-	bec->txerr = ioread32(&priv->regs->errc) & CAN_TEC;
-	bec->rxerr = (ioread32(&priv->regs->errc) & CAN_REC) >> 8;
+	bec->txerr = errc & PCH_TEC;
+	bec->rxerr = (errc & PCH_REC) >> 8;
 
 	return 0;
 }
@@ -1361,7 +1183,6 @@ static int __devinit pch_can_probe(struct pci_dev *pdev,
 	struct net_device *ndev;
 	struct pch_can_priv *priv;
 	int rc;
-	int index;
 	void __iomem *addr;
 
 	rc = pci_enable_device(pdev);
@@ -1383,7 +1204,7 @@ static int __devinit pch_can_probe(struct pci_dev *pdev,
 		goto probe_exit_ipmap;
 	}
 
-	ndev = alloc_candev(sizeof(struct pch_can_priv), PCH_TX_OBJ_NUM);
+	ndev = alloc_candev(sizeof(struct pch_can_priv), PCH_TX_OBJ_END);
 	if (!ndev) {
 		rc = -ENOMEM;
 		dev_err(&pdev->dev, "Failed alloc_candev\n");
@@ -1399,7 +1220,7 @@ static int __devinit pch_can_probe(struct pci_dev *pdev,
 	priv->can.do_get_berr_counter = pch_can_get_berr_counter;
 	priv->can.ctrlmode_supported = CAN_CTRLMODE_LISTENONLY |
 				       CAN_CTRLMODE_LOOPBACK;
-	priv->tx_obj = PCH_RX_OBJ_NUM + 1; /* Point head of Tx Obj */
+	priv->tx_obj = PCH_TX_OBJ_START; /* Point head of Tx Obj */
 
 	ndev->irq = pdev->irq;
 	ndev->flags |= IFF_ECHO;
@@ -1407,15 +1228,18 @@ static int __devinit pch_can_probe(struct pci_dev *pdev,
 	pci_set_drvdata(pdev, ndev);
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 	ndev->netdev_ops = &pch_can_netdev_ops;
-
 	priv->can.clock.freq = PCH_CAN_CLK; /* Hz */
-	for (index = 0; index < PCH_RX_OBJ_NUM;)
-		priv->msg_obj[index++] = MSG_OBJ_RX;
 
-	for (index = index;  index < PCH_OBJ_NUM;)
-		priv->msg_obj[index++] = MSG_OBJ_TX;
+	netif_napi_add(ndev, &priv->napi, pch_can_poll, PCH_RX_OBJ_END);
 
-	netif_napi_add(ndev, &priv->napi, pch_can_rx_poll, PCH_RX_OBJ_NUM);
+	rc = pci_enable_msi(priv->dev);
+	if (rc) {
+		netdev_err(ndev, "PCH CAN opened without MSI\n");
+		priv->use_msi = 0;
+	} else {
+		netdev_err(ndev, "PCH CAN opened with MSI\n");
+		priv->use_msi = 1;
+	}
 
 	rc = register_candev(ndev);
 	if (rc) {
@@ -1426,6 +1250,8 @@ static int __devinit pch_can_probe(struct pci_dev *pdev,
 	return 0;
 
 probe_exit_reg_candev:
+	if (priv->use_msi)
+		pci_disable_msi(priv->dev);
 	free_candev(ndev);
 probe_exit_alloc_candev:
 	pci_iounmap(pdev, addr);
@@ -1458,6 +1284,6 @@ static void __exit pch_can_pci_exit(void)
 }
 module_exit(pch_can_pci_exit);
 
-MODULE_DESCRIPTION("Controller Area Network Driver");
+MODULE_DESCRIPTION("Intel EG20T PCH CAN(Controller Area Network) Driver");
 MODULE_LICENSE("GPL v2");
 MODULE_VERSION("0.94");
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index 437b5c716a2..231385b8e08 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -383,7 +383,7 @@ static void plx_pci_reset_marathon(struct pci_dev *pdev)
 {
 	void __iomem *reset_addr;
 	int i;
-	int reset_bar[2] = {3, 5};
+	static const int reset_bar[2] = {3, 5};
 
 	plx_pci_reset_common(pdev);
 
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
index 5bfccfdf3bb..09c3e9db931 100644
--- a/drivers/net/can/sja1000/sja1000_of_platform.c
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -107,17 +107,13 @@ static int __devinit sja1000_ofp_probe(struct platform_device *ofdev,
 	res_size = resource_size(&res);
 
 	if (!request_mem_region(res.start, res_size, DRV_NAME)) {
-		dev_err(&ofdev->dev, "couldn't request %#llx..%#llx\n",
-			(unsigned long long)res.start,
-			(unsigned long long)res.end);
+		dev_err(&ofdev->dev, "couldn't request %pR\n", &res);
 		return -EBUSY;
 	}
 
 	base = ioremap_nocache(res.start, res_size);
 	if (!base) {
-		dev_err(&ofdev->dev, "couldn't ioremap %#llx..%#llx\n",
-			(unsigned long long)res.start,
-			(unsigned long long)res.end);
+		dev_err(&ofdev->dev, "couldn't ioremap %pR\n", &res);
 		err = -ENOMEM;
 		goto exit_release_mem;
 	}
diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c
new file mode 100644
index 00000000000..b423965a78d
--- /dev/null
+++ b/drivers/net/can/slcan.c
@@ -0,0 +1,756 @@
+/*
+ * slcan.c - serial line CAN interface driver (using tty line discipline)
+ *
+ * This file is derived from linux/drivers/net/slip.c
+ *
+ * slip.c Authors  : Laurence Culhane <loz@holmes.demon.co.uk>
+ *                   Fred N. van Kempen <waltje@uwalt.nl.mugnet.org>
+ * slcan.c Author  : Oliver Hartkopp <socketcan@hartkopp.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307. You can also get it
+ * at http://www.gnu.org/licenses/gpl.html
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#include <asm/system.h>
+#include <linux/uaccess.h>
+#include <linux/bitops.h>
+#include <linux/string.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/rtnetlink.h>
+#include <linux/if_arp.h>
+#include <linux/if_ether.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/can.h>
+
+static __initdata const char banner[] =
+	KERN_INFO "slcan: serial line CAN interface driver\n";
+
+MODULE_ALIAS_LDISC(N_SLCAN);
+MODULE_DESCRIPTION("serial line CAN interface");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Oliver Hartkopp <socketcan@hartkopp.net>");
+
+#define SLCAN_MAGIC 0x53CA
+
+static int maxdev = 10;		/* MAX number of SLCAN channels;
+				   This can be overridden with
+				   insmod slcan.ko maxdev=nnn	*/
+module_param(maxdev, int, 0);
+MODULE_PARM_DESC(maxdev, "Maximum number of slcan interfaces");
+
+/* maximum rx buffer len: extended CAN frame with timestamp */
+#define SLC_MTU (sizeof("T1111222281122334455667788EA5F\r")+1)
+
+struct slcan {
+	int			magic;
+
+	/* Various fields. */
+	struct tty_struct	*tty;		/* ptr to TTY structure	     */
+	struct net_device	*dev;		/* easy for intr handling    */
+	spinlock_t		lock;
+
+	/* These are pointers to the malloc()ed frame buffers. */
+	unsigned char		rbuff[SLC_MTU];	/* receiver buffer	     */
+	int			rcount;         /* received chars counter    */
+	unsigned char		xbuff[SLC_MTU];	/* transmitter buffer	     */
+	unsigned char		*xhead;         /* pointer to next XMIT byte */
+	int			xleft;          /* bytes left in XMIT queue  */
+
+	unsigned long		flags;		/* Flag values/ mode etc     */
+#define SLF_INUSE		0		/* Channel in use            */
+#define SLF_ERROR		1               /* Parity, etc. error        */
+
+	unsigned char		leased;
+	dev_t			line;
+	pid_t			pid;
+};
+
+static struct net_device **slcan_devs;
+
+ /************************************************************************
+  *			SLCAN ENCAPSULATION FORMAT			 *
+  ************************************************************************/
+
+/*
+ * A CAN frame has a can_id (11 bit standard frame format OR 29 bit extended
+ * frame format) a data length code (can_dlc) which can be from 0 to 8
+ * and up to <can_dlc> data bytes as payload.
+ * Additionally a CAN frame may become a remote transmission frame if the
+ * RTR-bit is set. This causes another ECU to send a CAN frame with the
+ * given can_id.
+ *
+ * The SLCAN ASCII representation of these different frame types is:
+ * <type> <id> <dlc> <data>*
+ *
+ * Extended frames (29 bit) are defined by capital characters in the type.
+ * RTR frames are defined as 'r' types - normal frames have 't' type:
+ * t => 11 bit data frame
+ * r => 11 bit RTR frame
+ * T => 29 bit data frame
+ * R => 29 bit RTR frame
+ *
+ * The <id> is 3 (standard) or 8 (extended) bytes in ASCII Hex (base64).
+ * The <dlc> is a one byte ASCII number ('0' - '8')
+ * The <data> section has at much ASCII Hex bytes as defined by the <dlc>
+ *
+ * Examples:
+ *
+ * t1230 : can_id 0x123, can_dlc 0, no data
+ * t4563112233 : can_id 0x456, can_dlc 3, data 0x11 0x22 0x33
+ * T12ABCDEF2AA55 : extended can_id 0x12ABCDEF, can_dlc 2, data 0xAA 0x55
+ * r1230 : can_id 0x123, can_dlc 0, no data, remote transmission request
+ *
+ */
+
+ /************************************************************************
+  *			STANDARD SLCAN DECAPSULATION			 *
+  ************************************************************************/
+
+static int asc2nibble(char c)
+{
+
+	if ((c >= '0') && (c <= '9'))
+		return c - '0';
+
+	if ((c >= 'A') && (c <= 'F'))
+		return c - 'A' + 10;
+
+	if ((c >= 'a') && (c <= 'f'))
+		return c - 'a' + 10;
+
+	return 16; /* error */
+}
+
+/* Send one completely decapsulated can_frame to the network layer */
+static void slc_bump(struct slcan *sl)
+{
+	struct sk_buff *skb;
+	struct can_frame cf;
+	int i, dlc_pos, tmp;
+	unsigned long ultmp;
+	char cmd = sl->rbuff[0];
+
+	if ((cmd != 't') && (cmd != 'T') && (cmd != 'r') && (cmd != 'R'))
+		return;
+
+	if (cmd & 0x20) /* tiny chars 'r' 't' => standard frame format */
+		dlc_pos = 4; /* dlc position tiiid */
+	else
+		dlc_pos = 9; /* dlc position Tiiiiiiiid */
+
+	if (!((sl->rbuff[dlc_pos] >= '0') && (sl->rbuff[dlc_pos] < '9')))
+		return;
+
+	cf.can_dlc = sl->rbuff[dlc_pos] - '0'; /* get can_dlc from ASCII val */
+
+	sl->rbuff[dlc_pos] = 0; /* terminate can_id string */
+
+	if (strict_strtoul(sl->rbuff+1, 16, &ultmp))
+		return;
+
+	cf.can_id = ultmp;
+
+	if (!(cmd & 0x20)) /* NO tiny chars => extended frame format */
+		cf.can_id |= CAN_EFF_FLAG;
+
+	if ((cmd | 0x20) == 'r') /* RTR frame */
+		cf.can_id |= CAN_RTR_FLAG;
+
+	*(u64 *) (&cf.data) = 0; /* clear payload */
+
+	for (i = 0, dlc_pos++; i < cf.can_dlc; i++) {
+
+		tmp = asc2nibble(sl->rbuff[dlc_pos++]);
+		if (tmp > 0x0F)
+			return;
+		cf.data[i] = (tmp << 4);
+		tmp = asc2nibble(sl->rbuff[dlc_pos++]);
+		if (tmp > 0x0F)
+			return;
+		cf.data[i] |= tmp;
+	}
+
+
+	skb = dev_alloc_skb(sizeof(struct can_frame));
+	if (!skb)
+		return;
+
+	skb->dev = sl->dev;
+	skb->protocol = htons(ETH_P_CAN);
+	skb->pkt_type = PACKET_BROADCAST;
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	memcpy(skb_put(skb, sizeof(struct can_frame)),
+	       &cf, sizeof(struct can_frame));
+	netif_rx(skb);
+
+	sl->dev->stats.rx_packets++;
+	sl->dev->stats.rx_bytes += cf.can_dlc;
+}
+
+/* parse tty input stream */
+static void slcan_unesc(struct slcan *sl, unsigned char s)
+{
+
+	if ((s == '\r') || (s == '\a')) { /* CR or BEL ends the pdu */
+		if (!test_and_clear_bit(SLF_ERROR, &sl->flags) &&
+		    (sl->rcount > 4))  {
+			slc_bump(sl);
+		}
+		sl->rcount = 0;
+	} else {
+		if (!test_bit(SLF_ERROR, &sl->flags))  {
+			if (sl->rcount < SLC_MTU)  {
+				sl->rbuff[sl->rcount++] = s;
+				return;
+			} else {
+				sl->dev->stats.rx_over_errors++;
+				set_bit(SLF_ERROR, &sl->flags);
+			}
+		}
+	}
+}
+
+ /************************************************************************
+  *			STANDARD SLCAN ENCAPSULATION			 *
+  ************************************************************************/
+
+/* Encapsulate one can_frame and stuff into a TTY queue. */
+static void slc_encaps(struct slcan *sl, struct can_frame *cf)
+{
+	int actual, idx, i;
+	char cmd;
+
+	if (cf->can_id & CAN_RTR_FLAG)
+		cmd = 'R'; /* becomes 'r' in standard frame format */
+	else
+		cmd = 'T'; /* becomes 't' in standard frame format */
+
+	if (cf->can_id & CAN_EFF_FLAG)
+		sprintf(sl->xbuff, "%c%08X%d", cmd,
+			cf->can_id & CAN_EFF_MASK, cf->can_dlc);
+	else
+		sprintf(sl->xbuff, "%c%03X%d", cmd | 0x20,
+			cf->can_id & CAN_SFF_MASK, cf->can_dlc);
+
+	idx = strlen(sl->xbuff);
+
+	for (i = 0; i < cf->can_dlc; i++)
+		sprintf(&sl->xbuff[idx + 2*i], "%02X", cf->data[i]);
+
+	strcat(sl->xbuff, "\r"); /* add terminating character */
+
+	/* Order of next two lines is *very* important.
+	 * When we are sending a little amount of data,
+	 * the transfer may be completed inside the ops->write()
+	 * routine, because it's running with interrupts enabled.
+	 * In this case we *never* got WRITE_WAKEUP event,
+	 * if we did not request it before write operation.
+	 *       14 Oct 1994  Dmitry Gorodchanin.
+	 */
+	set_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
+	actual = sl->tty->ops->write(sl->tty, sl->xbuff, strlen(sl->xbuff));
+	sl->xleft = strlen(sl->xbuff) - actual;
+	sl->xhead = sl->xbuff + actual;
+	sl->dev->stats.tx_bytes += cf->can_dlc;
+}
+
+/*
+ * Called by the driver when there's room for more data.  If we have
+ * more packets to send, we send them here.
+ */
+static void slcan_write_wakeup(struct tty_struct *tty)
+{
+	int actual;
+	struct slcan *sl = (struct slcan *) tty->disc_data;
+
+	/* First make sure we're connected. */
+	if (!sl || sl->magic != SLCAN_MAGIC || !netif_running(sl->dev))
+		return;
+
+	if (sl->xleft <= 0)  {
+		/* Now serial buffer is almost free & we can start
+		 * transmission of another packet */
+		sl->dev->stats.tx_packets++;
+		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+		netif_wake_queue(sl->dev);
+		return;
+	}
+
+	actual = tty->ops->write(tty, sl->xhead, sl->xleft);
+	sl->xleft -= actual;
+	sl->xhead += actual;
+}
+
+/* Send a can_frame to a TTY queue. */
+static netdev_tx_t slc_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct slcan *sl = netdev_priv(dev);
+
+	if (skb->len != sizeof(struct can_frame))
+		goto out;
+
+	spin_lock(&sl->lock);
+	if (!netif_running(dev))  {
+		spin_unlock(&sl->lock);
+		printk(KERN_WARNING "%s: xmit: iface is down\n", dev->name);
+		goto out;
+	}
+	if (sl->tty == NULL) {
+		spin_unlock(&sl->lock);
+		goto out;
+	}
+
+	netif_stop_queue(sl->dev);
+	slc_encaps(sl, (struct can_frame *) skb->data); /* encaps & send */
+	spin_unlock(&sl->lock);
+
+out:
+	kfree_skb(skb);
+	return NETDEV_TX_OK;
+}
+
+
+/******************************************
+ *   Routines looking at netdevice side.
+ ******************************************/
+
+/* Netdevice UP -> DOWN routine */
+static int slc_close(struct net_device *dev)
+{
+	struct slcan *sl = netdev_priv(dev);
+
+	spin_lock_bh(&sl->lock);
+	if (sl->tty) {
+		/* TTY discipline is running. */
+		clear_bit(TTY_DO_WRITE_WAKEUP, &sl->tty->flags);
+	}
+	netif_stop_queue(dev);
+	sl->rcount   = 0;
+	sl->xleft    = 0;
+	spin_unlock_bh(&sl->lock);
+
+	return 0;
+}
+
+/* Netdevice DOWN -> UP routine */
+static int slc_open(struct net_device *dev)
+{
+	struct slcan *sl = netdev_priv(dev);
+
+	if (sl->tty == NULL)
+		return -ENODEV;
+
+	sl->flags &= (1 << SLF_INUSE);
+	netif_start_queue(dev);
+	return 0;
+}
+
+/* Hook the destructor so we can free slcan devs at the right point in time */
+static void slc_free_netdev(struct net_device *dev)
+{
+	int i = dev->base_addr;
+	free_netdev(dev);
+	slcan_devs[i] = NULL;
+}
+
+static const struct net_device_ops slc_netdev_ops = {
+	.ndo_open               = slc_open,
+	.ndo_stop               = slc_close,
+	.ndo_start_xmit         = slc_xmit,
+};
+
+static void slc_setup(struct net_device *dev)
+{
+	dev->netdev_ops		= &slc_netdev_ops;
+	dev->destructor		= slc_free_netdev;
+
+	dev->hard_header_len	= 0;
+	dev->addr_len		= 0;
+	dev->tx_queue_len	= 10;
+
+	dev->mtu		= sizeof(struct can_frame);
+	dev->type		= ARPHRD_CAN;
+
+	/* New-style flags. */
+	dev->flags		= IFF_NOARP;
+	dev->features           = NETIF_F_NO_CSUM;
+}
+
+/******************************************
+  Routines looking at TTY side.
+ ******************************************/
+
+/*
+ * Handle the 'receiver data ready' interrupt.
+ * This function is called by the 'tty_io' module in the kernel when
+ * a block of SLCAN data has been received, which can now be decapsulated
+ * and sent on to some IP layer for further processing. This will not
+ * be re-entered while running but other ldisc functions may be called
+ * in parallel
+ */
+
+static void slcan_receive_buf(struct tty_struct *tty,
+			      const unsigned char *cp, char *fp, int count)
+{
+	struct slcan *sl = (struct slcan *) tty->disc_data;
+
+	if (!sl || sl->magic != SLCAN_MAGIC || !netif_running(sl->dev))
+		return;
+
+	/* Read the characters out of the buffer */
+	while (count--) {
+		if (fp && *fp++) {
+			if (!test_and_set_bit(SLF_ERROR, &sl->flags))
+				sl->dev->stats.rx_errors++;
+			cp++;
+			continue;
+		}
+		slcan_unesc(sl, *cp++);
+	}
+}
+
+/************************************
+ *  slcan_open helper routines.
+ ************************************/
+
+/* Collect hanged up channels */
+static void slc_sync(void)
+{
+	int i;
+	struct net_device *dev;
+	struct slcan	  *sl;
+
+	for (i = 0; i < maxdev; i++) {
+		dev = slcan_devs[i];
+		if (dev == NULL)
+			break;
+
+		sl = netdev_priv(dev);
+		if (sl->tty || sl->leased)
+			continue;
+		if (dev->flags & IFF_UP)
+			dev_close(dev);
+	}
+}
+
+/* Find a free SLCAN channel, and link in this `tty' line. */
+static struct slcan *slc_alloc(dev_t line)
+{
+	int i;
+	struct net_device *dev = NULL;
+	struct slcan       *sl;
+
+	if (slcan_devs == NULL)
+		return NULL;	/* Master array missing ! */
+
+	for (i = 0; i < maxdev; i++) {
+		dev = slcan_devs[i];
+		if (dev == NULL)
+			break;
+
+	}
+
+	/* Sorry, too many, all slots in use */
+	if (i >= maxdev)
+		return NULL;
+
+	if (dev) {
+		sl = netdev_priv(dev);
+		if (test_bit(SLF_INUSE, &sl->flags)) {
+			unregister_netdevice(dev);
+			dev = NULL;
+			slcan_devs[i] = NULL;
+		}
+	}
+
+	if (!dev) {
+		char name[IFNAMSIZ];
+		sprintf(name, "slcan%d", i);
+
+		dev = alloc_netdev(sizeof(*sl), name, slc_setup);
+		if (!dev)
+			return NULL;
+		dev->base_addr  = i;
+	}
+
+	sl = netdev_priv(dev);
+
+	/* Initialize channel control data */
+	sl->magic = SLCAN_MAGIC;
+	sl->dev	= dev;
+	spin_lock_init(&sl->lock);
+	slcan_devs[i] = dev;
+
+	return sl;
+}
+
+/*
+ * Open the high-level part of the SLCAN channel.
+ * This function is called by the TTY module when the
+ * SLCAN line discipline is called for.  Because we are
+ * sure the tty line exists, we only have to link it to
+ * a free SLCAN channel...
+ *
+ * Called in process context serialized from other ldisc calls.
+ */
+
+static int slcan_open(struct tty_struct *tty)
+{
+	struct slcan *sl;
+	int err;
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (tty->ops->write == NULL)
+		return -EOPNOTSUPP;
+
+	/* RTnetlink lock is misused here to serialize concurrent
+	   opens of slcan channels. There are better ways, but it is
+	   the simplest one.
+	 */
+	rtnl_lock();
+
+	/* Collect hanged up channels. */
+	slc_sync();
+
+	sl = tty->disc_data;
+
+	err = -EEXIST;
+	/* First make sure we're not already connected. */
+	if (sl && sl->magic == SLCAN_MAGIC)
+		goto err_exit;
+
+	/* OK.  Find a free SLCAN channel to use. */
+	err = -ENFILE;
+	sl = slc_alloc(tty_devnum(tty));
+	if (sl == NULL)
+		goto err_exit;
+
+	sl->tty = tty;
+	tty->disc_data = sl;
+	sl->line = tty_devnum(tty);
+	sl->pid = current->pid;
+
+	if (!test_bit(SLF_INUSE, &sl->flags)) {
+		/* Perform the low-level SLCAN initialization. */
+		sl->rcount   = 0;
+		sl->xleft    = 0;
+
+		set_bit(SLF_INUSE, &sl->flags);
+
+		err = register_netdevice(sl->dev);
+		if (err)
+			goto err_free_chan;
+	}
+
+	/* Done.  We have linked the TTY line to a channel. */
+	rtnl_unlock();
+	tty->receive_room = 65536;	/* We don't flow control */
+	return sl->dev->base_addr;
+
+err_free_chan:
+	sl->tty = NULL;
+	tty->disc_data = NULL;
+	clear_bit(SLF_INUSE, &sl->flags);
+
+err_exit:
+	rtnl_unlock();
+
+	/* Count references from TTY module */
+	return err;
+}
+
+/*
+ * Close down a SLCAN channel.
+ * This means flushing out any pending queues, and then returning. This
+ * call is serialized against other ldisc functions.
+ *
+ * We also use this method for a hangup event.
+ */
+
+static void slcan_close(struct tty_struct *tty)
+{
+	struct slcan *sl = (struct slcan *) tty->disc_data;
+
+	/* First make sure we're connected. */
+	if (!sl || sl->magic != SLCAN_MAGIC || sl->tty != tty)
+		return;
+
+	tty->disc_data = NULL;
+	sl->tty = NULL;
+	if (!sl->leased)
+		sl->line = 0;
+
+	/* Flush network side */
+	unregister_netdev(sl->dev);
+	/* This will complete via sl_free_netdev */
+}
+
+static int slcan_hangup(struct tty_struct *tty)
+{
+	slcan_close(tty);
+	return 0;
+}
+
+/* Perform I/O control on an active SLCAN channel. */
+static int slcan_ioctl(struct tty_struct *tty, struct file *file,
+		       unsigned int cmd, unsigned long arg)
+{
+	struct slcan *sl = (struct slcan *) tty->disc_data;
+	unsigned int tmp;
+
+	/* First make sure we're connected. */
+	if (!sl || sl->magic != SLCAN_MAGIC)
+		return -EINVAL;
+
+	switch (cmd) {
+	case SIOCGIFNAME:
+		tmp = strlen(sl->dev->name) + 1;
+		if (copy_to_user((void __user *)arg, sl->dev->name, tmp))
+			return -EFAULT;
+		return 0;
+
+	case SIOCSIFHWADDR:
+		return -EINVAL;
+
+	default:
+		return tty_mode_ioctl(tty, file, cmd, arg);
+	}
+}
+
+static struct tty_ldisc_ops slc_ldisc = {
+	.owner		= THIS_MODULE,
+	.magic		= TTY_LDISC_MAGIC,
+	.name		= "slcan",
+	.open		= slcan_open,
+	.close		= slcan_close,
+	.hangup		= slcan_hangup,
+	.ioctl		= slcan_ioctl,
+	.receive_buf	= slcan_receive_buf,
+	.write_wakeup	= slcan_write_wakeup,
+};
+
+static int __init slcan_init(void)
+{
+	int status;
+
+	if (maxdev < 4)
+		maxdev = 4; /* Sanity */
+
+	printk(banner);
+	printk(KERN_INFO "slcan: %d dynamic interface channels.\n", maxdev);
+
+	slcan_devs = kzalloc(sizeof(struct net_device *)*maxdev, GFP_KERNEL);
+	if (!slcan_devs) {
+		printk(KERN_ERR "slcan: can't allocate slcan device array!\n");
+		return -ENOMEM;
+	}
+
+	/* Fill in our line protocol discipline, and register it */
+	status = tty_register_ldisc(N_SLCAN, &slc_ldisc);
+	if (status)  {
+		printk(KERN_ERR "slcan: can't register line discipline\n");
+		kfree(slcan_devs);
+	}
+	return status;
+}
+
+static void __exit slcan_exit(void)
+{
+	int i;
+	struct net_device *dev;
+	struct slcan *sl;
+	unsigned long timeout = jiffies + HZ;
+	int busy = 0;
+
+	if (slcan_devs == NULL)
+		return;
+
+	/* First of all: check for active disciplines and hangup them.
+	 */
+	do {
+		if (busy)
+			msleep_interruptible(100);
+
+		busy = 0;
+		for (i = 0; i < maxdev; i++) {
+			dev = slcan_devs[i];
+			if (!dev)
+				continue;
+			sl = netdev_priv(dev);
+			spin_lock_bh(&sl->lock);
+			if (sl->tty) {
+				busy++;
+				tty_hangup(sl->tty);
+			}
+			spin_unlock_bh(&sl->lock);
+		}
+	} while (busy && time_before(jiffies, timeout));
+
+	/* FIXME: hangup is async so we should wait when doing this second
+	   phase */
+
+	for (i = 0; i < maxdev; i++) {
+		dev = slcan_devs[i];
+		if (!dev)
+			continue;
+		slcan_devs[i] = NULL;
+
+		sl = netdev_priv(dev);
+		if (sl->tty) {
+			printk(KERN_ERR "%s: tty discipline still running\n",
+			       dev->name);
+			/* Intentionally leak the control block. */
+			dev->destructor = NULL;
+		}
+
+		unregister_netdev(dev);
+	}
+
+	kfree(slcan_devs);
+	slcan_devs = NULL;
+
+	i = tty_unregister_ldisc(N_SLCAN);
+	if (i)
+		printk(KERN_ERR "slcan: can't unregister ldisc (err %d)\n", i);
+}
+
+module_init(slcan_init);
+module_exit(slcan_exit);
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index d6b6d6aa565..7206ab2cbbf 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -2788,7 +2788,7 @@ static inline int cas_xmit_tx_ringN(struct cas *cp, int ring,
 
 	ctrl = 0;
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		const u64 csum_start_off = skb_transport_offset(skb);
+		const u64 csum_start_off = skb_checksum_start_offset(skb);
 		const u64 csum_stuff_off = csum_start_off + skb->csum_offset;
 
 		ctrl =  TX_DESC_CSUM_EN |
@@ -3203,6 +3203,10 @@ static int cas_get_vpd_info(struct cas *cp, unsigned char *dev_addr,
 	int phy_type = CAS_PHY_MII_MDIO0; /* default phy type */
 	int mac_off  = 0;
 
+#if defined(CONFIG_OF)
+	const unsigned char *addr;
+#endif
+
 	/* give us access to the PROM */
 	writel(BIM_LOCAL_DEV_PROM | BIM_LOCAL_DEV_PAD,
 	       cp->regs + REG_BIM_LOCAL_DEV_EN);
@@ -3350,6 +3354,14 @@ use_random_mac_addr:
 	if (found & VPD_FOUND_MAC)
 		goto done;
 
+#if defined(CONFIG_OF)
+	addr = of_get_property(cp->of_node, "local-mac-address", NULL);
+	if (addr != NULL) {
+		memcpy(dev_addr, addr, 6);
+		goto done;
+	}
+#endif
+
 	/* Sun MAC prefix then 3 random bytes. */
 	pr_info("MAC address not found in ROM VPD\n");
 	dev_addr[0] = 0x08;
@@ -3880,7 +3892,7 @@ static int cas_change_mtu(struct net_device *dev, int new_mtu)
 	schedule_work(&cp->reset_task);
 #endif
 
-	flush_scheduled_work();
+	flush_work_sync(&cp->reset_task);
 	return 0;
 }
 
@@ -5019,6 +5031,10 @@ static int __devinit cas_init_one(struct pci_dev *pdev,
 	cp->msg_enable = (cassini_debug < 0) ? CAS_DEF_MSG_ENABLE :
 	  cassini_debug;
 
+#if defined(CONFIG_OF)
+	cp->of_node = pci_device_to_OF_node(pdev);
+#endif
+
 	cp->link_transition = LINK_TRANSITION_UNKNOWN;
 	cp->link_transition_jiffies_valid = 0;
 
@@ -5177,7 +5193,7 @@ static void __devexit cas_remove_one(struct pci_dev *pdev)
 		vfree(cp->fw_data);
 
 	mutex_lock(&cp->pm_mutex);
-	flush_scheduled_work();
+	cancel_work_sync(&cp->reset_task);
 	if (cp->hw_running)
 		cas_shutdown(cp);
 	mutex_unlock(&cp->pm_mutex);
diff --git a/drivers/net/cassini.h b/drivers/net/cassini.h
index dbc47878d83..faf4746a0f3 100644
--- a/drivers/net/cassini.h
+++ b/drivers/net/cassini.h
@@ -2868,6 +2868,9 @@ struct cas {
 	dma_addr_t block_dvma, tx_tiny_dvma[N_TX_RINGS];
 	struct pci_dev *pdev;
 	struct net_device *dev;
+#if defined(CONFIG_OF)
+	struct device_node	*of_node;
+#endif
 
 	/* Firmware Info */
 	u16			fw_load_addr;
diff --git a/drivers/net/chelsio/my3126.c b/drivers/net/chelsio/my3126.c
index 4c6028512d1..a683fd3bb62 100644
--- a/drivers/net/chelsio/my3126.c
+++ b/drivers/net/chelsio/my3126.c
@@ -22,7 +22,7 @@ static int my3126_interrupt_enable(struct cphy *cphy)
 
 static int my3126_interrupt_disable(struct cphy *cphy)
 {
-	cancel_rearming_delayed_work(&cphy->phy_update);
+	cancel_delayed_work_sync(&cphy->phy_update);
 	return 0;
 }
 
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index 70221ca3268..f778b15ad3f 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -273,6 +273,10 @@ struct sge {
 	struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp;
 };
 
+static const u8 ch_mac_addr[ETH_ALEN] = {
+	0x0, 0x7, 0x43, 0x0, 0x0, 0x0
+};
+
 /*
  * stop tasklet and free all pending skb's
  */
@@ -2012,10 +2016,6 @@ static void espibug_workaround_t204(unsigned long data)
 				continue;
 
 			if (!skb->cb[0]) {
-				u8 ch_mac_addr[ETH_ALEN] = {
-					0x0, 0x7, 0x43, 0x0, 0x0, 0x0
-				};
-
 				skb_copy_to_linear_data_offset(skb,
 						    sizeof(struct cpl_tx_pkt),
 							       ch_mac_addr,
@@ -2048,8 +2048,6 @@ static void espibug_workaround(unsigned long data)
 
 	        if ((seop & 0xfff0fff) == 0xfff && skb) {
 	                if (!skb->cb[0]) {
-	                        u8 ch_mac_addr[ETH_ALEN] =
-	                            {0x0, 0x7, 0x43, 0x0, 0x0, 0x0};
 	                        skb_copy_to_linear_data_offset(skb,
 						     sizeof(struct cpl_tx_pkt),
 							       ch_mac_addr,
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 92bac19ad60..263a2944566 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -59,6 +59,7 @@ MODULE_DESCRIPTION("Broadcom NetXtreme II CNIC Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(CNIC_MODULE_VERSION);
 
+/* cnic_dev_list modifications are protected by both rtnl and cnic_dev_lock */
 static LIST_HEAD(cnic_dev_list);
 static LIST_HEAD(cnic_udev_list);
 static DEFINE_RWLOCK(cnic_dev_lock);
@@ -278,6 +279,7 @@ static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
 	u32 msg_type = ISCSI_KEVENT_IF_DOWN;
 	struct cnic_ulp_ops *ulp_ops;
 	struct cnic_uio_dev *udev = cp->udev;
+	int rc = 0, retry = 0;
 
 	if (!udev || udev->uio_dev == -1)
 		return -ENODEV;
@@ -302,14 +304,26 @@ static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
 		path_req.pmtu = csk->mtu;
 	}
 
-	rcu_read_lock();
-	ulp_ops = rcu_dereference(cnic_ulp_tbl[CNIC_ULP_ISCSI]);
-	if (ulp_ops)
-		ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len);
-	rcu_read_unlock();
+	while (retry < 3) {
+		rc = 0;
+		rcu_read_lock();
+		ulp_ops = rcu_dereference(cnic_ulp_tbl[CNIC_ULP_ISCSI]);
+		if (ulp_ops)
+			rc = ulp_ops->iscsi_nl_send_msg(
+				cp->ulp_handle[CNIC_ULP_ISCSI],
+				msg_type, buf, len);
+		rcu_read_unlock();
+		if (rc == 0 || msg_type != ISCSI_KEVENT_PATH_REQ)
+			break;
+
+		msleep(100);
+		retry++;
+	}
 	return 0;
 }
 
+static void cnic_cm_upcall(struct cnic_local *, struct cnic_sock *, u8);
+
 static int cnic_iscsi_nl_msg_recv(struct cnic_dev *dev, u32 msg_type,
 				  char *buf, u16 len)
 {
@@ -339,7 +353,9 @@ static int cnic_iscsi_nl_msg_recv(struct cnic_dev *dev, u32 msg_type,
 		}
 		csk = &cp->csk_tbl[l5_cid];
 		csk_hold(csk);
-		if (cnic_in_use(csk)) {
+		if (cnic_in_use(csk) &&
+		    test_bit(SK_F_CONNECT_START, &csk->flags)) {
+
 			memcpy(csk->ha, path_resp->mac_addr, 6);
 			if (test_bit(SK_F_IPV6, &csk->flags))
 				memcpy(&csk->src_ip[0], &path_resp->src.v6_addr,
@@ -347,8 +363,16 @@ static int cnic_iscsi_nl_msg_recv(struct cnic_dev *dev, u32 msg_type,
 			else
 				memcpy(&csk->src_ip[0], &path_resp->src.v4_addr,
 				       sizeof(struct in_addr));
-			if (is_valid_ether_addr(csk->ha))
+
+			if (is_valid_ether_addr(csk->ha)) {
 				cnic_cm_set_pg(csk);
+			} else if (!test_bit(SK_F_OFFLD_SCHED, &csk->flags) &&
+				!test_bit(SK_F_OFFLD_COMPLETE, &csk->flags)) {
+
+				cnic_cm_upcall(cp, csk,
+					L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE);
+				clear_bit(SK_F_CONNECT_START, &csk->flags);
+			}
 		}
 		csk_put(csk);
 		rcu_read_unlock();
@@ -402,19 +426,6 @@ static int cnic_abort_prep(struct cnic_sock *csk)
 	return 0;
 }
 
-static void cnic_uio_stop(void)
-{
-	struct cnic_dev *dev;
-
-	read_lock(&cnic_dev_lock);
-	list_for_each_entry(dev, &cnic_dev_list, list) {
-		struct cnic_local *cp = dev->cnic_priv;
-
-		cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
-	}
-	read_unlock(&cnic_dev_lock);
-}
-
 int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
 {
 	struct cnic_dev *dev;
@@ -445,14 +456,12 @@ int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
 
 	/* Prevent race conditions with netdev_event */
 	rtnl_lock();
-	read_lock(&cnic_dev_lock);
 	list_for_each_entry(dev, &cnic_dev_list, list) {
 		struct cnic_local *cp = dev->cnic_priv;
 
 		if (!test_and_set_bit(ULP_F_INIT, &cp->ulp_flags[ulp_type]))
 			ulp_ops->cnic_init(dev);
 	}
-	read_unlock(&cnic_dev_lock);
 	rtnl_unlock();
 
 	return 0;
@@ -488,9 +497,6 @@ int cnic_unregister_driver(int ulp_type)
 	}
 	read_unlock(&cnic_dev_lock);
 
-	if (ulp_type == CNIC_ULP_ISCSI)
-		cnic_uio_stop();
-
 	rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL);
 
 	mutex_unlock(&cnic_lock);
@@ -574,6 +580,9 @@ static int cnic_unregister_device(struct cnic_dev *dev, int ulp_type)
 	}
 	mutex_unlock(&cnic_lock);
 
+	if (ulp_type == CNIC_ULP_ISCSI)
+		cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+
 	synchronize_rcu();
 
 	while (test_bit(ULP_F_CALL_PENDING, &cp->ulp_flags[ulp_type]) &&
@@ -821,12 +830,14 @@ static void cnic_free_resc(struct cnic_dev *dev)
 	cnic_free_dma(dev, &cp->conn_buf_info);
 	cnic_free_dma(dev, &cp->kwq_info);
 	cnic_free_dma(dev, &cp->kwq_16_data_info);
+	cnic_free_dma(dev, &cp->kcq2.dma);
 	cnic_free_dma(dev, &cp->kcq1.dma);
 	kfree(cp->iscsi_tbl);
 	cp->iscsi_tbl = NULL;
 	kfree(cp->ctx_tbl);
 	cp->ctx_tbl = NULL;
 
+	cnic_free_id_tbl(&cp->fcoe_cid_tbl);
 	cnic_free_id_tbl(&cp->cid_tbl);
 }
 
@@ -940,7 +951,7 @@ static int cnic_alloc_uio_rings(struct cnic_dev *dev, int pages)
 					   &udev->l2_ring_map,
 					   GFP_KERNEL | __GFP_COMP);
 	if (!udev->l2_ring)
-		return -ENOMEM;
+		goto err_udev;
 
 	udev->l2_buf_size = (cp->l2_rx_ring_size + 1) * cp->l2_single_buf_size;
 	udev->l2_buf_size = PAGE_ALIGN(udev->l2_buf_size);
@@ -948,7 +959,7 @@ static int cnic_alloc_uio_rings(struct cnic_dev *dev, int pages)
 					  &udev->l2_buf_map,
 					  GFP_KERNEL | __GFP_COMP);
 	if (!udev->l2_buf)
-		return -ENOMEM;
+		goto err_dma;
 
 	write_lock(&cnic_dev_lock);
 	list_add(&udev->list, &cnic_udev_list);
@@ -959,6 +970,12 @@ static int cnic_alloc_uio_rings(struct cnic_dev *dev, int pages)
 	cp->udev = udev;
 
 	return 0;
+ err_dma:
+	dma_free_coherent(&udev->pdev->dev, udev->l2_ring_size,
+			  udev->l2_ring, udev->l2_ring_map);
+ err_udev:
+	kfree(udev);
+	return -ENOMEM;
 }
 
 static int cnic_init_uio(struct cnic_dev *dev)
@@ -1114,12 +1131,22 @@ static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev)
 
 	cp->iro_arr = ethdev->iro_arr;
 
-	cp->max_cid_space = MAX_ISCSI_TBL_SZ;
+	cp->max_cid_space = MAX_ISCSI_TBL_SZ + BNX2X_FCOE_NUM_CONNECTIONS;
 	cp->iscsi_start_cid = start_cid;
+	cp->fcoe_start_cid = start_cid + MAX_ISCSI_TBL_SZ;
+
+	if (BNX2X_CHIP_IS_E2(cp->chip_id)) {
+		cp->max_cid_space += BNX2X_FCOE_NUM_CONNECTIONS;
+		cp->fcoe_init_cid = ethdev->fcoe_init_cid;
+		if (!cp->fcoe_init_cid)
+			cp->fcoe_init_cid = 0x10;
+	}
+
 	if (start_cid < BNX2X_ISCSI_START_CID) {
 		u32 delta = BNX2X_ISCSI_START_CID - start_cid;
 
 		cp->iscsi_start_cid = BNX2X_ISCSI_START_CID;
+		cp->fcoe_start_cid += delta;
 		cp->max_cid_space += delta;
 	}
 
@@ -1138,6 +1165,9 @@ static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev)
 		cp->ctx_tbl[i].ulp_proto_id = CNIC_ULP_ISCSI;
 	}
 
+	for (i = MAX_ISCSI_TBL_SZ; i < cp->max_cid_space; i++)
+		cp->ctx_tbl[i].ulp_proto_id = CNIC_ULP_FCOE;
+
 	pages = PAGE_ALIGN(cp->max_cid_space * CNIC_KWQ16_DATA_SIZE) /
 		PAGE_SIZE;
 
@@ -1161,6 +1191,12 @@ static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev)
 	if (ret)
 		goto error;
 
+	if (BNX2X_CHIP_IS_E2(cp->chip_id)) {
+		ret = cnic_alloc_kcq(dev, &cp->kcq2);
+		if (ret)
+			goto error;
+	}
+
 	pages = PAGE_ALIGN(BNX2X_ISCSI_NUM_CONNECTIONS *
 			   BNX2X_ISCSI_CONN_BUF_SIZE) / PAGE_SIZE;
 	ret = cnic_alloc_dma(dev, &cp->conn_buf_info, pages, 1);
@@ -1254,12 +1290,18 @@ static int cnic_submit_kwqe_16(struct cnic_dev *dev, u32 cmd, u32 cid,
 	struct cnic_local *cp = dev->cnic_priv;
 	struct l5cm_spe kwqe;
 	struct kwqe_16 *kwq[1];
+	u16 type_16;
 	int ret;
 
 	kwqe.hdr.conn_and_cmd_data =
 		cpu_to_le32(((cmd << SPE_HDR_CMD_ID_SHIFT) |
 			     BNX2X_HW_CID(cp, cid)));
-	kwqe.hdr.type = cpu_to_le16(type);
+
+	type_16 = (type << SPE_HDR_CONN_TYPE_SHIFT) & SPE_HDR_CONN_TYPE;
+	type_16 |= (cp->pfid << SPE_HDR_FUNCTION_ID_SHIFT) &
+		   SPE_HDR_FUNCTION_ID;
+
+	kwqe.hdr.type = cpu_to_le16(type_16);
 	kwqe.hdr.reserved1 = 0;
 	kwqe.data.phy_address.lo = cpu_to_le32(l5_data->phy_address.lo);
 	kwqe.data.phy_address.hi = cpu_to_le32(l5_data->phy_address.hi);
@@ -1425,8 +1467,11 @@ static void cnic_free_bnx2x_conn_resc(struct cnic_dev *dev, u32 l5_cid)
 		cnic_free_dma(dev, &iscsi->hq_info);
 		cnic_free_dma(dev, &iscsi->r2tq_info);
 		cnic_free_dma(dev, &iscsi->task_array_info);
+		cnic_free_id(&cp->cid_tbl, ctx->cid);
+	} else {
+		cnic_free_id(&cp->fcoe_cid_tbl, ctx->cid);
 	}
-	cnic_free_id(&cp->cid_tbl, ctx->cid);
+
 	ctx->cid = 0;
 }
 
@@ -1438,6 +1483,16 @@ static int cnic_alloc_bnx2x_conn_resc(struct cnic_dev *dev, u32 l5_cid)
 	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
 	struct cnic_iscsi *iscsi = ctx->proto.iscsi;
 
+	if (ctx->ulp_proto_id == CNIC_ULP_FCOE) {
+		cid = cnic_alloc_new_id(&cp->fcoe_cid_tbl);
+		if (cid == -1) {
+			ret = -ENOMEM;
+			goto error;
+		}
+		ctx->cid = cid;
+		return 0;
+	}
+
 	cid = cnic_alloc_new_id(&cp->cid_tbl);
 	if (cid == -1) {
 		ret = -ENOMEM;
@@ -1695,7 +1750,7 @@ static int cnic_bnx2x_iscsi_ofld1(struct cnic_dev *dev, struct kwqe *wqes[],
 		*work = num;
 		return -EINVAL;
 	}
-	*work = 2 + req2->num_additional_wqes;;
+	*work = 2 + req2->num_additional_wqes;
 
 	l5_cid = req1->iscsi_conn_id;
 	if (l5_cid >= MAX_ISCSI_TBL_SZ)
@@ -1770,19 +1825,15 @@ static int cnic_bnx2x_destroy_ramrod(struct cnic_dev *dev, u32 l5_cid)
 	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
 	union l5cm_specific_data l5_data;
 	int ret;
-	u32 hw_cid, type;
+	u32 hw_cid;
 
 	init_waitqueue_head(&ctx->waitq);
 	ctx->wait_cond = 0;
 	memset(&l5_data, 0, sizeof(l5_data));
 	hw_cid = BNX2X_HW_CID(cp, ctx->cid);
-	type = (NONE_CONNECTION_TYPE << SPE_HDR_CONN_TYPE_SHIFT)
-		& SPE_HDR_CONN_TYPE;
-	type |= ((cp->pfid << SPE_HDR_FUNCTION_ID_SHIFT) &
-		 SPE_HDR_FUNCTION_ID);
 
 	ret = cnic_submit_kwqe_16(dev, RAMROD_CMD_ID_COMMON_CFC_DEL,
-				  hw_cid, type, &l5_data);
+				  hw_cid, NONE_CONNECTION_TYPE, &l5_data);
 
 	if (ret == 0)
 		wait_event(ctx->waitq, ctx->wait_cond);
@@ -2078,8 +2129,306 @@ static int cnic_bnx2x_update_pg(struct cnic_dev *dev, struct kwqe *kwqe)
 	return 0;
 }
 
-static int cnic_submit_bnx2x_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
-				   u32 num_wqes)
+static int cnic_bnx2x_fcoe_stat(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct fcoe_kwqe_stat *req;
+	struct fcoe_stat_ramrod_params *fcoe_stat;
+	union l5cm_specific_data l5_data;
+	struct cnic_local *cp = dev->cnic_priv;
+	int ret;
+	u32 cid;
+
+	req = (struct fcoe_kwqe_stat *) kwqe;
+	cid = BNX2X_HW_CID(cp, cp->fcoe_init_cid);
+
+	fcoe_stat = cnic_get_kwqe_16_data(cp, BNX2X_FCOE_L5_CID_BASE, &l5_data);
+	if (!fcoe_stat)
+		return -ENOMEM;
+
+	memset(fcoe_stat, 0, sizeof(*fcoe_stat));
+	memcpy(&fcoe_stat->stat_kwqe, req, sizeof(*req));
+
+	ret = cnic_submit_kwqe_16(dev, FCOE_RAMROD_CMD_ID_STAT, cid,
+				  FCOE_CONNECTION_TYPE, &l5_data);
+	return ret;
+}
+
+static int cnic_bnx2x_fcoe_init1(struct cnic_dev *dev, struct kwqe *wqes[],
+				 u32 num, int *work)
+{
+	int ret;
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 cid;
+	struct fcoe_init_ramrod_params *fcoe_init;
+	struct fcoe_kwqe_init1 *req1;
+	struct fcoe_kwqe_init2 *req2;
+	struct fcoe_kwqe_init3 *req3;
+	union l5cm_specific_data l5_data;
+
+	if (num < 3) {
+		*work = num;
+		return -EINVAL;
+	}
+	req1 = (struct fcoe_kwqe_init1 *) wqes[0];
+	req2 = (struct fcoe_kwqe_init2 *) wqes[1];
+	req3 = (struct fcoe_kwqe_init3 *) wqes[2];
+	if (req2->hdr.op_code != FCOE_KWQE_OPCODE_INIT2) {
+		*work = 1;
+		return -EINVAL;
+	}
+	if (req3->hdr.op_code != FCOE_KWQE_OPCODE_INIT3) {
+		*work = 2;
+		return -EINVAL;
+	}
+
+	if (sizeof(*fcoe_init) > CNIC_KWQ16_DATA_SIZE) {
+		netdev_err(dev->netdev, "fcoe_init size too big\n");
+		return -ENOMEM;
+	}
+	fcoe_init = cnic_get_kwqe_16_data(cp, BNX2X_FCOE_L5_CID_BASE, &l5_data);
+	if (!fcoe_init)
+		return -ENOMEM;
+
+	memset(fcoe_init, 0, sizeof(*fcoe_init));
+	memcpy(&fcoe_init->init_kwqe1, req1, sizeof(*req1));
+	memcpy(&fcoe_init->init_kwqe2, req2, sizeof(*req2));
+	memcpy(&fcoe_init->init_kwqe3, req3, sizeof(*req3));
+	fcoe_init->eq_addr.lo = cp->kcq2.dma.pg_map_arr[0] & 0xffffffff;
+	fcoe_init->eq_addr.hi = (u64) cp->kcq2.dma.pg_map_arr[0] >> 32;
+	fcoe_init->eq_next_page_addr.lo =
+		cp->kcq2.dma.pg_map_arr[1] & 0xffffffff;
+	fcoe_init->eq_next_page_addr.hi =
+		(u64) cp->kcq2.dma.pg_map_arr[1] >> 32;
+
+	fcoe_init->sb_num = cp->status_blk_num;
+	fcoe_init->eq_prod = MAX_KCQ_IDX;
+	fcoe_init->sb_id = HC_INDEX_FCOE_EQ_CONS;
+	cp->kcq2.sw_prod_idx = 0;
+
+	cid = BNX2X_HW_CID(cp, cp->fcoe_init_cid);
+	ret = cnic_submit_kwqe_16(dev, FCOE_RAMROD_CMD_ID_INIT, cid,
+				  FCOE_CONNECTION_TYPE, &l5_data);
+	*work = 3;
+	return ret;
+}
+
+static int cnic_bnx2x_fcoe_ofld1(struct cnic_dev *dev, struct kwqe *wqes[],
+				 u32 num, int *work)
+{
+	int ret = 0;
+	u32 cid = -1, l5_cid;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct fcoe_kwqe_conn_offload1 *req1;
+	struct fcoe_kwqe_conn_offload2 *req2;
+	struct fcoe_kwqe_conn_offload3 *req3;
+	struct fcoe_kwqe_conn_offload4 *req4;
+	struct fcoe_conn_offload_ramrod_params *fcoe_offload;
+	struct cnic_context *ctx;
+	struct fcoe_context *fctx;
+	struct regpair ctx_addr;
+	union l5cm_specific_data l5_data;
+	struct fcoe_kcqe kcqe;
+	struct kcqe *cqes[1];
+
+	if (num < 4) {
+		*work = num;
+		return -EINVAL;
+	}
+	req1 = (struct fcoe_kwqe_conn_offload1 *) wqes[0];
+	req2 = (struct fcoe_kwqe_conn_offload2 *) wqes[1];
+	req3 = (struct fcoe_kwqe_conn_offload3 *) wqes[2];
+	req4 = (struct fcoe_kwqe_conn_offload4 *) wqes[3];
+
+	*work = 4;
+
+	l5_cid = req1->fcoe_conn_id;
+	if (l5_cid >= BNX2X_FCOE_NUM_CONNECTIONS)
+		goto err_reply;
+
+	l5_cid += BNX2X_FCOE_L5_CID_BASE;
+
+	ctx = &cp->ctx_tbl[l5_cid];
+	if (test_bit(CTX_FL_OFFLD_START, &ctx->ctx_flags))
+		goto err_reply;
+
+	ret = cnic_alloc_bnx2x_conn_resc(dev, l5_cid);
+	if (ret) {
+		ret = 0;
+		goto err_reply;
+	}
+	cid = ctx->cid;
+
+	fctx = cnic_get_bnx2x_ctx(dev, cid, 1, &ctx_addr);
+	if (fctx) {
+		u32 hw_cid = BNX2X_HW_CID(cp, cid);
+		u32 val;
+
+		val = CDU_RSRVD_VALUE_TYPE_A(hw_cid, CDU_REGION_NUMBER_XCM_AG,
+					     FCOE_CONNECTION_TYPE);
+		fctx->xstorm_ag_context.cdu_reserved = val;
+		val = CDU_RSRVD_VALUE_TYPE_A(hw_cid, CDU_REGION_NUMBER_UCM_AG,
+					     FCOE_CONNECTION_TYPE);
+		fctx->ustorm_ag_context.cdu_usage = val;
+	}
+	if (sizeof(*fcoe_offload) > CNIC_KWQ16_DATA_SIZE) {
+		netdev_err(dev->netdev, "fcoe_offload size too big\n");
+		goto err_reply;
+	}
+	fcoe_offload = cnic_get_kwqe_16_data(cp, l5_cid, &l5_data);
+	if (!fcoe_offload)
+		goto err_reply;
+
+	memset(fcoe_offload, 0, sizeof(*fcoe_offload));
+	memcpy(&fcoe_offload->offload_kwqe1, req1, sizeof(*req1));
+	memcpy(&fcoe_offload->offload_kwqe2, req2, sizeof(*req2));
+	memcpy(&fcoe_offload->offload_kwqe3, req3, sizeof(*req3));
+	memcpy(&fcoe_offload->offload_kwqe4, req4, sizeof(*req4));
+
+	cid = BNX2X_HW_CID(cp, cid);
+	ret = cnic_submit_kwqe_16(dev, FCOE_RAMROD_CMD_ID_OFFLOAD_CONN, cid,
+				  FCOE_CONNECTION_TYPE, &l5_data);
+	if (!ret)
+		set_bit(CTX_FL_OFFLD_START, &ctx->ctx_flags);
+
+	return ret;
+
+err_reply:
+	if (cid != -1)
+		cnic_free_bnx2x_conn_resc(dev, l5_cid);
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.op_code = FCOE_KCQE_OPCODE_OFFLOAD_CONN;
+	kcqe.fcoe_conn_id = req1->fcoe_conn_id;
+	kcqe.completion_status = FCOE_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE;
+
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_FCOE, cqes, 1);
+	return ret;
+}
+
+static int cnic_bnx2x_fcoe_enable(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct fcoe_kwqe_conn_enable_disable *req;
+	struct fcoe_conn_enable_disable_ramrod_params *fcoe_enable;
+	union l5cm_specific_data l5_data;
+	int ret;
+	u32 cid, l5_cid;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	req = (struct fcoe_kwqe_conn_enable_disable *) kwqe;
+	cid = req->context_id;
+	l5_cid = req->conn_id + BNX2X_FCOE_L5_CID_BASE;
+
+	if (sizeof(*fcoe_enable) > CNIC_KWQ16_DATA_SIZE) {
+		netdev_err(dev->netdev, "fcoe_enable size too big\n");
+		return -ENOMEM;
+	}
+	fcoe_enable = cnic_get_kwqe_16_data(cp, l5_cid, &l5_data);
+	if (!fcoe_enable)
+		return -ENOMEM;
+
+	memset(fcoe_enable, 0, sizeof(*fcoe_enable));
+	memcpy(&fcoe_enable->enable_disable_kwqe, req, sizeof(*req));
+	ret = cnic_submit_kwqe_16(dev, FCOE_RAMROD_CMD_ID_ENABLE_CONN, cid,
+				  FCOE_CONNECTION_TYPE, &l5_data);
+	return ret;
+}
+
+static int cnic_bnx2x_fcoe_disable(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct fcoe_kwqe_conn_enable_disable *req;
+	struct fcoe_conn_enable_disable_ramrod_params *fcoe_disable;
+	union l5cm_specific_data l5_data;
+	int ret;
+	u32 cid, l5_cid;
+	struct cnic_local *cp = dev->cnic_priv;
+
+	req = (struct fcoe_kwqe_conn_enable_disable *) kwqe;
+	cid = req->context_id;
+	l5_cid = req->conn_id;
+	if (l5_cid >= BNX2X_FCOE_NUM_CONNECTIONS)
+		return -EINVAL;
+
+	l5_cid += BNX2X_FCOE_L5_CID_BASE;
+
+	if (sizeof(*fcoe_disable) > CNIC_KWQ16_DATA_SIZE) {
+		netdev_err(dev->netdev, "fcoe_disable size too big\n");
+		return -ENOMEM;
+	}
+	fcoe_disable = cnic_get_kwqe_16_data(cp, l5_cid, &l5_data);
+	if (!fcoe_disable)
+		return -ENOMEM;
+
+	memset(fcoe_disable, 0, sizeof(*fcoe_disable));
+	memcpy(&fcoe_disable->enable_disable_kwqe, req, sizeof(*req));
+	ret = cnic_submit_kwqe_16(dev, FCOE_RAMROD_CMD_ID_DISABLE_CONN, cid,
+				  FCOE_CONNECTION_TYPE, &l5_data);
+	return ret;
+}
+
+static int cnic_bnx2x_fcoe_destroy(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct fcoe_kwqe_conn_destroy *req;
+	union l5cm_specific_data l5_data;
+	int ret;
+	u32 cid, l5_cid;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_context *ctx;
+	struct fcoe_kcqe kcqe;
+	struct kcqe *cqes[1];
+
+	req = (struct fcoe_kwqe_conn_destroy *) kwqe;
+	cid = req->context_id;
+	l5_cid = req->conn_id;
+	if (l5_cid >= BNX2X_FCOE_NUM_CONNECTIONS)
+		return -EINVAL;
+
+	l5_cid += BNX2X_FCOE_L5_CID_BASE;
+
+	ctx = &cp->ctx_tbl[l5_cid];
+
+	init_waitqueue_head(&ctx->waitq);
+	ctx->wait_cond = 0;
+
+	memset(&l5_data, 0, sizeof(l5_data));
+	ret = cnic_submit_kwqe_16(dev, FCOE_RAMROD_CMD_ID_TERMINATE_CONN, cid,
+				  FCOE_CONNECTION_TYPE, &l5_data);
+	if (ret == 0) {
+		wait_event(ctx->waitq, ctx->wait_cond);
+		set_bit(CTX_FL_DELETE_WAIT, &ctx->ctx_flags);
+		queue_delayed_work(cnic_wq, &cp->delete_task,
+				   msecs_to_jiffies(2000));
+	}
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.op_code = FCOE_KCQE_OPCODE_DESTROY_CONN;
+	kcqe.fcoe_conn_id = req->conn_id;
+	kcqe.fcoe_conn_context_id = cid;
+
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_FCOE, cqes, 1);
+	return ret;
+}
+
+static int cnic_bnx2x_fcoe_fw_destroy(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct fcoe_kwqe_destroy *req;
+	union l5cm_specific_data l5_data;
+	struct cnic_local *cp = dev->cnic_priv;
+	int ret;
+	u32 cid;
+
+	req = (struct fcoe_kwqe_destroy *) kwqe;
+	cid = BNX2X_HW_CID(cp, cp->fcoe_init_cid);
+
+	memset(&l5_data, 0, sizeof(l5_data));
+	ret = cnic_submit_kwqe_16(dev, FCOE_RAMROD_CMD_ID_DESTROY, cid,
+				  FCOE_CONNECTION_TYPE, &l5_data);
+	return ret;
+}
+
+static int cnic_submit_bnx2x_iscsi_kwqes(struct cnic_dev *dev,
+					 struct kwqe *wqes[], u32 num_wqes)
 {
 	int i, work, ret;
 	u32 opcode;
@@ -2143,6 +2492,98 @@ static int cnic_submit_bnx2x_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
 	return 0;
 }
 
+static int cnic_submit_bnx2x_fcoe_kwqes(struct cnic_dev *dev,
+					struct kwqe *wqes[], u32 num_wqes)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i, work, ret;
+	u32 opcode;
+	struct kwqe *kwqe;
+
+	if (!test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EAGAIN;		/* bnx2 is down */
+
+	if (BNX2X_CHIP_NUM(cp->chip_id) == BNX2X_CHIP_NUM_57710)
+		return -EINVAL;
+
+	for (i = 0; i < num_wqes; ) {
+		kwqe = wqes[i];
+		opcode = KWQE_OPCODE(kwqe->kwqe_op_flag);
+		work = 1;
+
+		switch (opcode) {
+		case FCOE_KWQE_OPCODE_INIT1:
+			ret = cnic_bnx2x_fcoe_init1(dev, &wqes[i],
+						    num_wqes - i, &work);
+			break;
+		case FCOE_KWQE_OPCODE_OFFLOAD_CONN1:
+			ret = cnic_bnx2x_fcoe_ofld1(dev, &wqes[i],
+						    num_wqes - i, &work);
+			break;
+		case FCOE_KWQE_OPCODE_ENABLE_CONN:
+			ret = cnic_bnx2x_fcoe_enable(dev, kwqe);
+			break;
+		case FCOE_KWQE_OPCODE_DISABLE_CONN:
+			ret = cnic_bnx2x_fcoe_disable(dev, kwqe);
+			break;
+		case FCOE_KWQE_OPCODE_DESTROY_CONN:
+			ret = cnic_bnx2x_fcoe_destroy(dev, kwqe);
+			break;
+		case FCOE_KWQE_OPCODE_DESTROY:
+			ret = cnic_bnx2x_fcoe_fw_destroy(dev, kwqe);
+			break;
+		case FCOE_KWQE_OPCODE_STAT:
+			ret = cnic_bnx2x_fcoe_stat(dev, kwqe);
+			break;
+		default:
+			ret = 0;
+			netdev_err(dev->netdev, "Unknown type of KWQE(0x%x)\n",
+				   opcode);
+			break;
+		}
+		if (ret < 0)
+			netdev_err(dev->netdev, "KWQE(0x%x) failed\n",
+				   opcode);
+		i += work;
+	}
+	return 0;
+}
+
+static int cnic_submit_bnx2x_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
+				   u32 num_wqes)
+{
+	int ret = -EINVAL;
+	u32 layer_code;
+
+	if (!test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EAGAIN;		/* bnx2x is down */
+
+	if (!num_wqes)
+		return 0;
+
+	layer_code = wqes[0]->kwqe_op_flag & KWQE_LAYER_MASK;
+	switch (layer_code) {
+	case KWQE_FLAGS_LAYER_MASK_L5_ISCSI:
+	case KWQE_FLAGS_LAYER_MASK_L4:
+	case KWQE_FLAGS_LAYER_MASK_L2:
+		ret = cnic_submit_bnx2x_iscsi_kwqes(dev, wqes, num_wqes);
+		break;
+
+	case KWQE_FLAGS_LAYER_MASK_L5_FCOE:
+		ret = cnic_submit_bnx2x_fcoe_kwqes(dev, wqes, num_wqes);
+		break;
+	}
+	return ret;
+}
+
+static inline u32 cnic_get_kcqe_layer_mask(u32 opflag)
+{
+	if (unlikely(KCQE_OPCODE(opflag) == FCOE_RAMROD_CMD_ID_TERMINATE_CONN))
+		return KCQE_FLAGS_LAYER_MASK_L4;
+
+	return opflag & KCQE_FLAGS_LAYER_MASK;
+}
+
 static void service_kcqes(struct cnic_dev *dev, int num_cqes)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -2154,7 +2595,7 @@ static void service_kcqes(struct cnic_dev *dev, int num_cqes)
 		struct cnic_ulp_ops *ulp_ops;
 		int ulp_type;
 		u32 kcqe_op_flag = cp->completed_kcq[i]->kcqe_op_flag;
-		u32 kcqe_layer = kcqe_op_flag & KCQE_FLAGS_LAYER_MASK;
+		u32 kcqe_layer = cnic_get_kcqe_layer_mask(kcqe_op_flag);
 
 		if (unlikely(kcqe_op_flag & KCQE_RAMROD_COMPLETION))
 			comp++;
@@ -2162,7 +2603,7 @@ static void service_kcqes(struct cnic_dev *dev, int num_cqes)
 		while (j < num_cqes) {
 			u32 next_op = cp->completed_kcq[i + j]->kcqe_op_flag;
 
-			if ((next_op & KCQE_FLAGS_LAYER_MASK) != kcqe_layer)
+			if (cnic_get_kcqe_layer_mask(next_op) != kcqe_layer)
 				break;
 
 			if (unlikely(next_op & KCQE_RAMROD_COMPLETION))
@@ -2174,6 +2615,8 @@ static void service_kcqes(struct cnic_dev *dev, int num_cqes)
 			ulp_type = CNIC_ULP_RDMA;
 		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L5_ISCSI)
 			ulp_type = CNIC_ULP_ISCSI;
+		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L5_FCOE)
+			ulp_type = CNIC_ULP_FCOE;
 		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L4)
 			ulp_type = CNIC_ULP_L4;
 		else if (kcqe_layer == KCQE_FLAGS_LAYER_MASK_L2)
@@ -2342,11 +2785,12 @@ static u32 cnic_service_bnx2_queues(struct cnic_dev *dev)
 static int cnic_service_bnx2(void *data, void *status_blk)
 {
 	struct cnic_dev *dev = data;
-	struct cnic_local *cp = dev->cnic_priv;
-	u32 status_idx = *cp->kcq1.status_idx_ptr;
 
-	if (unlikely(!test_bit(CNIC_F_CNIC_UP, &dev->flags)))
-		return status_idx;
+	if (unlikely(!test_bit(CNIC_F_CNIC_UP, &dev->flags))) {
+		struct status_block *sblk = status_blk;
+
+		return sblk->status_idx;
+	}
 
 	return cnic_service_bnx2_queues(dev);
 }
@@ -2365,9 +2809,10 @@ static void cnic_service_bnx2_msix(unsigned long data)
 static void cnic_doirq(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
-	u16 prod = cp->kcq1.sw_prod_idx & MAX_KCQ_IDX;
 
 	if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags))) {
+		u16 prod = cp->kcq1.sw_prod_idx & MAX_KCQ_IDX;
+
 		prefetch(cp->status_blk.gen);
 		prefetch(&cp->kcq1.kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
 
@@ -2469,12 +2914,19 @@ static void cnic_service_bnx2x_bh(unsigned long data)
 	status_idx = cnic_service_bnx2x_kcq(dev, &cp->kcq1);
 
 	CNIC_WR16(dev, cp->kcq1.io_addr, cp->kcq1.sw_prod_idx + MAX_KCQ_IDX);
-	if (BNX2X_CHIP_IS_E2(cp->chip_id))
+
+	if (BNX2X_CHIP_IS_E2(cp->chip_id)) {
+		status_idx = cnic_service_bnx2x_kcq(dev, &cp->kcq2);
+
+		CNIC_WR16(dev, cp->kcq2.io_addr, cp->kcq2.sw_prod_idx +
+			  MAX_KCQ_IDX);
+
 		cnic_ack_igu_sb(dev, cp->bnx2x_igu_sb_id, IGU_SEG_ACCESS_DEF,
 				status_idx, IGU_INT_ENABLE, 1);
-	else
+	} else {
 		cnic_ack_bnx2x_int(dev, cp->bnx2x_igu_sb_id, USTORM_ID,
 				   status_idx, IGU_INT_ENABLE, 1);
+	}
 }
 
 static int cnic_service_bnx2x(void *data, void *status_blk)
@@ -2883,7 +3335,7 @@ static void cnic_cm_cleanup(struct cnic_sock *csk)
 		struct cnic_dev *dev = csk->dev;
 		struct cnic_local *cp = dev->cnic_priv;
 
-		cnic_free_id(&cp->csk_port_tbl, csk->src_port);
+		cnic_free_id(&cp->csk_port_tbl, be16_to_cpu(csk->src_port));
 		csk->src_port = 0;
 	}
 }
@@ -3014,7 +3466,8 @@ static int cnic_get_route(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
 	int is_v6, rc = 0;
 	struct dst_entry *dst = NULL;
 	struct net_device *realdev;
-	u32 local_port;
+	__be16 local_port;
+	u32 port_id;
 
 	if (saddr->local.v6.sin6_family == AF_INET6 &&
 	    saddr->remote.v6.sin6_family == AF_INET6)
@@ -3054,19 +3507,21 @@ static int cnic_get_route(struct cnic_sock *csk, struct cnic_sockaddr *saddr)
 		}
 	}
 
-	if (local_port >= CNIC_LOCAL_PORT_MIN &&
-	    local_port < CNIC_LOCAL_PORT_MAX) {
-		if (cnic_alloc_id(&cp->csk_port_tbl, local_port))
-			local_port = 0;
+	port_id = be16_to_cpu(local_port);
+	if (port_id >= CNIC_LOCAL_PORT_MIN &&
+	    port_id < CNIC_LOCAL_PORT_MAX) {
+		if (cnic_alloc_id(&cp->csk_port_tbl, port_id))
+			port_id = 0;
 	} else
-		local_port = 0;
+		port_id = 0;
 
-	if (!local_port) {
-		local_port = cnic_alloc_new_id(&cp->csk_port_tbl);
-		if (local_port == -1) {
+	if (!port_id) {
+		port_id = cnic_alloc_new_id(&cp->csk_port_tbl);
+		if (port_id == -1) {
 			rc = -ENOMEM;
 			goto err_out;
 		}
+		local_port = cpu_to_be16(port_id);
 	}
 	csk->src_port = local_port;
 
@@ -3208,6 +3663,18 @@ done:
 	csk_put(csk);
 }
 
+static void cnic_process_fcoe_term_conn(struct cnic_dev *dev, struct kcqe *kcqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct fcoe_kcqe *fc_kcqe = (struct fcoe_kcqe *) kcqe;
+	u32 l5_cid = fc_kcqe->fcoe_conn_id + BNX2X_FCOE_L5_CID_BASE;
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+
+	ctx->timestamp = jiffies;
+	ctx->wait_cond = 1;
+	wake_up(&ctx->waitq);
+}
+
 static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -3216,6 +3683,10 @@ static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe)
 	u32 l5_cid;
 	struct cnic_sock *csk;
 
+	if (opcode == FCOE_RAMROD_CMD_ID_TERMINATE_CONN) {
+		cnic_process_fcoe_term_conn(dev, kcqe);
+		return;
+	}
 	if (opcode == L4_KCQE_OPCODE_VALUE_OFFLOAD_PG ||
 	    opcode == L4_KCQE_OPCODE_VALUE_UPDATE_PG) {
 		cnic_cm_process_offld_pg(dev, l4kcqe);
@@ -3852,7 +4323,7 @@ static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *dev)
 
 	memset(&l2kwqe, 0, sizeof(l2kwqe));
 	wqes[0] = &l2kwqe;
-	l2kwqe.kwqe_op_flag = (L2_LAYER_CODE << KWQE_FLAGS_LAYER_SHIFT) |
+	l2kwqe.kwqe_op_flag = (L2_LAYER_CODE << KWQE_LAYER_SHIFT) |
 			      (L2_KWQE_OPCODE_VALUE_FLUSH <<
 			       KWQE_OPCODE_SHIFT) | 2;
 	dev->submit_kwqes(dev, wqes, 1);
@@ -4106,7 +4577,7 @@ static void cnic_init_bnx2x_tx_ring(struct cnic_dev *dev,
 	struct host_sp_status_block *sb = cp->bnx2x_def_status_blk;
 	int port = CNIC_PORT(cp);
 	int i;
-	int cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+	u32 cli = cp->ethdev->iscsi_l2_client_id;
 	u32 val;
 
 	memset(txbd, 0, BCM_PAGE_SIZE);
@@ -4167,7 +4638,7 @@ static void cnic_init_bnx2x_rx_ring(struct cnic_dev *dev,
 	struct host_sp_status_block *sb = cp->bnx2x_def_status_blk;
 	int i;
 	int port = CNIC_PORT(cp);
-	int cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+	u32 cli = cp->ethdev->iscsi_l2_client_id;
 	int cl_qzone_id = BNX2X_CL_QZONE_ID(cp, cli);
 	u32 val;
 	dma_addr_t ring_map = udev->l2_ring_map;
@@ -4231,12 +4702,39 @@ static void cnic_init_bnx2x_rx_ring(struct cnic_dev *dev,
 
 	cp->rx_cons_ptr =
 		&sb->sp_sb.index_values[HC_SP_INDEX_ETH_ISCSI_RX_CQ_CONS];
+	cp->rx_cons = *cp->rx_cons_ptr;
+}
+
+static int cnic_read_bnx2x_iscsi_mac(struct cnic_dev *dev, u32 upper_addr,
+				     u32 lower_addr)
+{
+	u32 val;
+	u8 mac[6];
+
+	val = CNIC_RD(dev, upper_addr);
+
+	mac[0] = (u8) (val >> 8);
+	mac[1] = (u8) val;
+
+	val = CNIC_RD(dev, lower_addr);
+
+	mac[2] = (u8) (val >> 24);
+	mac[3] = (u8) (val >> 16);
+	mac[4] = (u8) (val >> 8);
+	mac[5] = (u8) val;
+
+	if (is_valid_ether_addr(mac)) {
+		memcpy(dev->mac_addr, mac, 6);
+		return 0;
+	} else {
+		return -EINVAL;
+	}
 }
 
 static void cnic_get_bnx2x_iscsi_info(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
-	u32 base, base2, addr, val;
+	u32 base, base2, addr, addr1, val;
 	int port = CNIC_PORT(cp);
 
 	dev->max_iscsi_conn = 0;
@@ -4249,20 +4747,10 @@ static void cnic_get_bnx2x_iscsi_info(struct cnic_dev *dev)
 	addr = BNX2X_SHMEM_ADDR(base,
 		dev_info.port_hw_config[port].iscsi_mac_upper);
 
-	val = CNIC_RD(dev, addr);
-
-	dev->mac_addr[0] = (u8) (val >> 8);
-	dev->mac_addr[1] = (u8) val;
-
-	addr = BNX2X_SHMEM_ADDR(base,
+	addr1 = BNX2X_SHMEM_ADDR(base,
 		dev_info.port_hw_config[port].iscsi_mac_lower);
 
-	val = CNIC_RD(dev, addr);
-
-	dev->mac_addr[2] = (u8) (val >> 24);
-	dev->mac_addr[3] = (u8) (val >> 16);
-	dev->mac_addr[4] = (u8) (val >> 8);
-	dev->mac_addr[5] = (u8) val;
+	cnic_read_bnx2x_iscsi_mac(dev, addr, addr1);
 
 	addr = BNX2X_SHMEM_ADDR(base, validity_map[port]);
 	val = CNIC_RD(dev, addr);
@@ -4278,6 +4766,10 @@ static void cnic_get_bnx2x_iscsi_info(struct cnic_dev *dev)
 			val16 ^= 0x1e1e;
 		dev->max_iscsi_conn = val16;
 	}
+
+	if (BNX2X_CHIP_IS_E2(cp->chip_id))
+		dev->max_fcoe_conn = BNX2X_FCOE_NUM_CONNECTIONS;
+
 	if (BNX2X_CHIP_IS_E1H(cp->chip_id) || BNX2X_CHIP_IS_E2(cp->chip_id)) {
 		int func = CNIC_FUNC(cp);
 		u32 mf_cfg_addr;
@@ -4288,21 +4780,90 @@ static void cnic_get_bnx2x_iscsi_info(struct cnic_dev *dev)
 		else
 			mf_cfg_addr = base + BNX2X_SHMEM_MF_BLK_OFFSET;
 
-		addr = mf_cfg_addr +
-			offsetof(struct mf_cfg, func_mf_config[func].e1hov_tag);
+		if (BNX2X_CHIP_IS_E2(cp->chip_id)) {
+			/* Must determine if the MF is SD vs SI mode */
+			addr = BNX2X_SHMEM_ADDR(base,
+					dev_info.shared_feature_config.config);
+			val = CNIC_RD(dev, addr);
+			if ((val & SHARED_FEAT_CFG_FORCE_SF_MODE_MASK) ==
+			    SHARED_FEAT_CFG_FORCE_SF_MODE_SWITCH_INDEPT) {
+				int rc;
+
+				/* MULTI_FUNCTION_SI mode */
+				addr = BNX2X_MF_CFG_ADDR(mf_cfg_addr,
+					func_ext_config[func].func_cfg);
+				val = CNIC_RD(dev, addr);
+				if (!(val & MACP_FUNC_CFG_FLAGS_ISCSI_OFFLOAD))
+					dev->max_iscsi_conn = 0;
+
+				if (!(val & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD))
+					dev->max_fcoe_conn = 0;
+
+				addr = BNX2X_MF_CFG_ADDR(mf_cfg_addr,
+					func_ext_config[func].
+					iscsi_mac_addr_upper);
+				addr1 = BNX2X_MF_CFG_ADDR(mf_cfg_addr,
+					func_ext_config[func].
+					iscsi_mac_addr_lower);
+				rc = cnic_read_bnx2x_iscsi_mac(dev, addr,
+								addr1);
+				if (rc && func > 1)
+					dev->max_iscsi_conn = 0;
+
+				return;
+			}
+		}
+
+		addr = BNX2X_MF_CFG_ADDR(mf_cfg_addr,
+			func_mf_config[func].e1hov_tag);
 
 		val = CNIC_RD(dev, addr);
 		val &= FUNC_MF_CFG_E1HOV_TAG_MASK;
 		if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
-			addr = mf_cfg_addr +
-				offsetof(struct mf_cfg,
-					 func_mf_config[func].config);
-			val = CNIC_RD(dev, addr);
-			val &= FUNC_MF_CFG_PROTOCOL_MASK;
-			if (val != FUNC_MF_CFG_PROTOCOL_ISCSI)
-				dev->max_iscsi_conn = 0;
+			dev->max_fcoe_conn = 0;
+			dev->max_iscsi_conn = 0;
 		}
 	}
+	if (!is_valid_ether_addr(dev->mac_addr))
+		dev->max_iscsi_conn = 0;
+}
+
+static void cnic_init_bnx2x_kcq(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 pfid = cp->pfid;
+
+	cp->kcq1.io_addr = BAR_CSTRORM_INTMEM +
+			   CSTORM_ISCSI_EQ_PROD_OFFSET(pfid, 0);
+	cp->kcq1.sw_prod_idx = 0;
+
+	if (BNX2X_CHIP_IS_E2(cp->chip_id)) {
+		struct host_hc_status_block_e2 *sb = cp->status_blk.gen;
+
+		cp->kcq1.hw_prod_idx_ptr =
+			&sb->sb.index_values[HC_INDEX_ISCSI_EQ_CONS];
+		cp->kcq1.status_idx_ptr =
+			&sb->sb.running_index[SM_RX_ID];
+	} else {
+		struct host_hc_status_block_e1x *sb = cp->status_blk.gen;
+
+		cp->kcq1.hw_prod_idx_ptr =
+			&sb->sb.index_values[HC_INDEX_ISCSI_EQ_CONS];
+		cp->kcq1.status_idx_ptr =
+			&sb->sb.running_index[SM_RX_ID];
+	}
+
+	if (BNX2X_CHIP_IS_E2(cp->chip_id)) {
+		struct host_hc_status_block_e2 *sb = cp->status_blk.gen;
+
+		cp->kcq2.io_addr = BAR_USTRORM_INTMEM +
+					USTORM_FCOE_EQ_PROD_OFFSET(pfid);
+		cp->kcq2.sw_prod_idx = 0;
+		cp->kcq2.hw_prod_idx_ptr =
+			&sb->sb.index_values[HC_INDEX_FCOE_EQ_CONS];
+		cp->kcq2.status_idx_ptr =
+			&sb->sb.running_index[SM_RX_ID];
+	}
 }
 
 static int cnic_start_bnx2x_hw(struct cnic_dev *dev)
@@ -4335,28 +4896,19 @@ static int cnic_start_bnx2x_hw(struct cnic_dev *dev)
 	if (ret)
 		return -ENOMEM;
 
-	cp->bnx2x_igu_sb_id = ethdev->irq_arr[0].status_blk_num2;
-
-	cp->kcq1.io_addr = BAR_CSTRORM_INTMEM +
-			  CSTORM_ISCSI_EQ_PROD_OFFSET(pfid, 0);
-	cp->kcq1.sw_prod_idx = 0;
-
 	if (BNX2X_CHIP_IS_E2(cp->chip_id)) {
-		struct host_hc_status_block_e2 *sb = cp->status_blk.gen;
-
-		cp->kcq1.hw_prod_idx_ptr =
-			&sb->sb.index_values[HC_INDEX_ISCSI_EQ_CONS];
-		cp->kcq1.status_idx_ptr =
-			&sb->sb.running_index[SM_RX_ID];
-	} else {
-		struct host_hc_status_block_e1x *sb = cp->status_blk.gen;
+		ret = cnic_init_id_tbl(&cp->fcoe_cid_tbl,
+					BNX2X_FCOE_NUM_CONNECTIONS,
+					cp->fcoe_start_cid);
 
-		cp->kcq1.hw_prod_idx_ptr =
-			&sb->sb.index_values[HC_INDEX_ISCSI_EQ_CONS];
-		cp->kcq1.status_idx_ptr =
-			&sb->sb.running_index[SM_RX_ID];
+		if (ret)
+			return -ENOMEM;
 	}
 
+	cp->bnx2x_igu_sb_id = ethdev->irq_arr[0].status_blk_num2;
+
+	cnic_init_bnx2x_kcq(dev);
+
 	cnic_get_bnx2x_iscsi_info(dev);
 
 	/* Only 1 EQ */
@@ -4424,8 +4976,9 @@ static void cnic_init_rings(struct cnic_dev *dev)
 		cnic_init_bnx2_rx_ring(dev);
 		set_bit(CNIC_LCL_FL_RINGS_INITED, &cp->cnic_local_flags);
 	} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
-		u32 cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
-		u32 cl_qzone_id, type;
+		u32 cli = cp->ethdev->iscsi_l2_client_id;
+		u32 cid = cp->ethdev->iscsi_l2_cid;
+		u32 cl_qzone_id;
 		struct client_init_ramrod_data *data;
 		union l5cm_specific_data l5_data;
 		struct ustorm_eth_rx_producers rx_prods = {0};
@@ -4457,15 +5010,10 @@ static void cnic_init_rings(struct cnic_dev *dev)
 		l5_data.phy_address.lo = udev->l2_buf_map & 0xffffffff;
 		l5_data.phy_address.hi = (u64) udev->l2_buf_map >> 32;
 
-		type = (ETH_CONNECTION_TYPE << SPE_HDR_CONN_TYPE_SHIFT)
-			& SPE_HDR_CONN_TYPE;
-		type |= ((cp->pfid << SPE_HDR_FUNCTION_ID_SHIFT) &
-			SPE_HDR_FUNCTION_ID);
-
 		set_bit(CNIC_LCL_FL_RINGS_INITED, &cp->cnic_local_flags);
 
 		cnic_submit_kwqe_16(dev, RAMROD_CMD_ID_ETH_CLIENT_SETUP,
-			BNX2X_ISCSI_L2_CID, type, &l5_data);
+			cid, ETH_CONNECTION_TYPE, &l5_data);
 
 		i = 0;
 		while (test_bit(CNIC_LCL_FL_L2_WAIT, &cp->cnic_local_flags) &&
@@ -4476,7 +5024,7 @@ static void cnic_init_rings(struct cnic_dev *dev)
 			netdev_err(dev->netdev,
 				"iSCSI CLIENT_SETUP did not complete\n");
 		cnic_spq_completion(dev, DRV_CTL_RET_L2_SPQ_CREDIT_CMD, 1);
-		cnic_ring_ctl(dev, BNX2X_ISCSI_L2_CID, cli, 1);
+		cnic_ring_ctl(dev, cid, cli, 1);
 	}
 }
 
@@ -4491,19 +5039,19 @@ static void cnic_shutdown_rings(struct cnic_dev *dev)
 		cnic_shutdown_bnx2_rx_ring(dev);
 	} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
 		struct cnic_local *cp = dev->cnic_priv;
-		u32 cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+		u32 cli = cp->ethdev->iscsi_l2_client_id;
+		u32 cid = cp->ethdev->iscsi_l2_cid;
 		union l5cm_specific_data l5_data;
 		int i;
-		u32 type;
 
-		cnic_ring_ctl(dev, BNX2X_ISCSI_L2_CID, cli, 0);
+		cnic_ring_ctl(dev, cid, cli, 0);
 
 		set_bit(CNIC_LCL_FL_L2_WAIT, &cp->cnic_local_flags);
 
 		l5_data.phy_address.lo = cli;
 		l5_data.phy_address.hi = 0;
 		cnic_submit_kwqe_16(dev, RAMROD_CMD_ID_ETH_HALT,
-			BNX2X_ISCSI_L2_CID, ETH_CONNECTION_TYPE, &l5_data);
+			cid, ETH_CONNECTION_TYPE, &l5_data);
 		i = 0;
 		while (test_bit(CNIC_LCL_FL_L2_WAIT, &cp->cnic_local_flags) &&
 		       ++i < 10)
@@ -4515,12 +5063,8 @@ static void cnic_shutdown_rings(struct cnic_dev *dev)
 		cnic_spq_completion(dev, DRV_CTL_RET_L2_SPQ_CREDIT_CMD, 1);
 
 		memset(&l5_data, 0, sizeof(l5_data));
-		type = (NONE_CONNECTION_TYPE << SPE_HDR_CONN_TYPE_SHIFT)
-			& SPE_HDR_CONN_TYPE;
-		type |= ((cp->pfid << SPE_HDR_FUNCTION_ID_SHIFT) &
-			 SPE_HDR_FUNCTION_ID);
 		cnic_submit_kwqe_16(dev, RAMROD_CMD_ID_COMMON_CFC_DEL,
-			BNX2X_ISCSI_L2_CID, type, &l5_data);
+			cid, NONE_CONNECTION_TYPE, &l5_data);
 		msleep(10);
 	}
 	clear_bit(CNIC_LCL_FL_RINGS_INITED, &cp->cnic_local_flags);
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
index 6a4a0ae5cfe..b328f6c924c 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/cnic.h
@@ -82,7 +82,7 @@ struct cnic_redirect_entry {
 #define MAX_ISCSI_TBL_SZ	256
 
 #define CNIC_LOCAL_PORT_MIN	60000
-#define CNIC_LOCAL_PORT_MAX	61000
+#define CNIC_LOCAL_PORT_MAX	61024
 #define CNIC_LOCAL_PORT_RANGE	(CNIC_LOCAL_PORT_MAX - CNIC_LOCAL_PORT_MIN)
 
 #define KWQE_CNT (BCM_PAGE_SIZE / sizeof(struct kwqe))
@@ -258,6 +258,7 @@ struct cnic_local {
 	u16		kwq_con_idx;
 
 	struct kcq_info	kcq1;
+	struct kcq_info	kcq2;
 
 	union {
 		void				*gen;
@@ -290,6 +291,10 @@ struct cnic_local {
 	atomic_t		iscsi_conn;
 	u32			iscsi_start_cid;
 
+	u32			fcoe_init_cid;
+	u32			fcoe_start_cid;
+	struct cnic_id_tbl	fcoe_cid_tbl;
+
 	u32			max_cid_space;
 
 	/* per connection parameters */
@@ -356,11 +361,6 @@ struct bnx2x_bd_chain_next {
 #define BNX2X_CONTEXT_MEM_SIZE		1024
 #define BNX2X_FCOE_CID			16
 
-/* iSCSI client IDs are 17, 19, 21, 23 */
-#define BNX2X_ISCSI_BASE_CL_ID		17
-#define BNX2X_ISCSI_CL_ID(vn)		(BNX2X_ISCSI_BASE_CL_ID + ((vn) << 1))
-
-#define BNX2X_ISCSI_L2_CID		17
 #define BNX2X_ISCSI_START_CID		18
 #define BNX2X_ISCSI_NUM_CONNECTIONS	128
 #define BNX2X_ISCSI_TASK_CONTEXT_SIZE	128
@@ -372,6 +372,10 @@ struct bnx2x_bd_chain_next {
 #define BNX2X_ISCSI_PBL_NOT_CACHED	0xff
 #define BNX2X_ISCSI_PDU_HEADER_NOT_CACHED	0xff
 
+#define BNX2X_FCOE_NUM_CONNECTIONS	128
+
+#define BNX2X_FCOE_L5_CID_BASE		MAX_ISCSI_TBL_SZ
+
 #define BNX2X_CHIP_NUM_57710		0x164e
 #define BNX2X_CHIP_NUM_57711		0x164f
 #define BNX2X_CHIP_NUM_57711E		0x1650
@@ -427,6 +431,13 @@ struct bnx2x_bd_chain_next {
 		 (CNIC_RD(dev, BNX2X_SHMEM2_ADDR(base, size)) >	\
 		  offsetof(struct shmem2_region, field)))
 
+#define BNX2X_MF_CFG_ADDR(base, field)				\
+			((base) + offsetof(struct mf_cfg, field))
+
+#ifndef ETH_MAX_RX_CLIENTS_E2
+#define ETH_MAX_RX_CLIENTS_E2 		ETH_MAX_RX_CLIENTS_E1H
+#endif
+
 #define CNIC_PORT(cp)			((cp)->pfid & 1)
 #define CNIC_FUNC(cp)			((cp)->func)
 #define CNIC_PATH(cp)			(!BNX2X_CHIP_IS_E2(cp->chip_id) ? 0 :\
@@ -439,7 +450,9 @@ struct bnx2x_bd_chain_next {
 #define BNX2X_SW_CID(x)			(x & 0x1ffff)
 
 #define BNX2X_CL_QZONE_ID(cp, cli)					\
-		(cli + (CNIC_PORT(cp) * ETH_MAX_RX_CLIENTS_E1H))
+		(cli + (CNIC_PORT(cp) * (BNX2X_CHIP_IS_E2(cp->chip_id) ?\
+					ETH_MAX_RX_CLIENTS_E2 :		\
+					ETH_MAX_RX_CLIENTS_E1H)))
 
 #define TCP_TSTORM_OOO_DROP_AND_PROC_ACK	(0<<4)
 #endif
diff --git a/drivers/net/cnic_defs.h b/drivers/net/cnic_defs.h
index 328e8b2765a..fdbc0041560 100644
--- a/drivers/net/cnic_defs.h
+++ b/drivers/net/cnic_defs.h
@@ -35,6 +35,40 @@
 #define L5CM_RAMROD_CMD_ID_SEARCHER_DELETE	(L5CM_RAMROD_CMD_ID_BASE + 14)
 #define L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD	(L5CM_RAMROD_CMD_ID_BASE + 15)
 
+#define FCOE_KCQE_OPCODE_INIT_FUNC			(0x10)
+#define FCOE_KCQE_OPCODE_DESTROY_FUNC			(0x11)
+#define FCOE_KCQE_OPCODE_STAT_FUNC			(0x12)
+#define FCOE_KCQE_OPCODE_OFFLOAD_CONN			(0x15)
+#define FCOE_KCQE_OPCODE_ENABLE_CONN			(0x16)
+#define FCOE_KCQE_OPCODE_DISABLE_CONN			(0x17)
+#define FCOE_KCQE_OPCODE_DESTROY_CONN			(0x18)
+#define FCOE_KCQE_OPCODE_CQ_EVENT_NOTIFICATION  (0x20)
+#define FCOE_KCQE_OPCODE_FCOE_ERROR				(0x21)
+
+#define FCOE_RAMROD_CMD_ID_INIT			(FCOE_KCQE_OPCODE_INIT_FUNC)
+#define FCOE_RAMROD_CMD_ID_DESTROY		(FCOE_KCQE_OPCODE_DESTROY_FUNC)
+#define FCOE_RAMROD_CMD_ID_OFFLOAD_CONN		(FCOE_KCQE_OPCODE_OFFLOAD_CONN)
+#define FCOE_RAMROD_CMD_ID_ENABLE_CONN		(FCOE_KCQE_OPCODE_ENABLE_CONN)
+#define FCOE_RAMROD_CMD_ID_DISABLE_CONN		(FCOE_KCQE_OPCODE_DISABLE_CONN)
+#define FCOE_RAMROD_CMD_ID_DESTROY_CONN		(FCOE_KCQE_OPCODE_DESTROY_CONN)
+#define FCOE_RAMROD_CMD_ID_STAT			(FCOE_KCQE_OPCODE_STAT_FUNC)
+#define FCOE_RAMROD_CMD_ID_TERMINATE_CONN	(0x81)
+
+#define FCOE_KWQE_OPCODE_INIT1                  (0)
+#define FCOE_KWQE_OPCODE_INIT2                  (1)
+#define FCOE_KWQE_OPCODE_INIT3                  (2)
+#define FCOE_KWQE_OPCODE_OFFLOAD_CONN1  (3)
+#define FCOE_KWQE_OPCODE_OFFLOAD_CONN2  (4)
+#define FCOE_KWQE_OPCODE_OFFLOAD_CONN3  (5)
+#define FCOE_KWQE_OPCODE_OFFLOAD_CONN4  (6)
+#define FCOE_KWQE_OPCODE_ENABLE_CONN	(7)
+#define FCOE_KWQE_OPCODE_DISABLE_CONN	(8)
+#define FCOE_KWQE_OPCODE_DESTROY_CONN	(9)
+#define FCOE_KWQE_OPCODE_DESTROY		(10)
+#define FCOE_KWQE_OPCODE_STAT			(11)
+
+#define FCOE_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE	(0x3)
+
 /* KCQ (kernel completion queue) response op codes */
 #define L4_KCQE_OPCODE_VALUE_CLOSE_COMP             (53)
 #define L4_KCQE_OPCODE_VALUE_RESET_COMP             (54)
@@ -683,6 +717,1496 @@ struct cstorm_iscsi_ag_context {
 };
 
 /*
+ * Parameters initialized during offloaded according to FLOGI/PLOGI/PRLI and used in FCoE context section
+ */
+struct ustorm_fcoe_params {
+#if defined(__BIG_ENDIAN)
+	u16 fcoe_conn_id;
+	u16 flags;
+#define USTORM_FCOE_PARAMS_B_MUL_N_PORT_IDS (0x1<<0)
+#define USTORM_FCOE_PARAMS_B_MUL_N_PORT_IDS_SHIFT 0
+#define USTORM_FCOE_PARAMS_B_E_D_TOV_RES (0x1<<1)
+#define USTORM_FCOE_PARAMS_B_E_D_TOV_RES_SHIFT 1
+#define USTORM_FCOE_PARAMS_B_CONT_INCR_SEQ_CNT (0x1<<2)
+#define USTORM_FCOE_PARAMS_B_CONT_INCR_SEQ_CNT_SHIFT 2
+#define USTORM_FCOE_PARAMS_B_CONF_REQ (0x1<<3)
+#define USTORM_FCOE_PARAMS_B_CONF_REQ_SHIFT 3
+#define USTORM_FCOE_PARAMS_B_REC_VALID (0x1<<4)
+#define USTORM_FCOE_PARAMS_B_REC_VALID_SHIFT 4
+#define USTORM_FCOE_PARAMS_B_CQ_TOGGLE_BIT (0x1<<5)
+#define USTORM_FCOE_PARAMS_B_CQ_TOGGLE_BIT_SHIFT 5
+#define USTORM_FCOE_PARAMS_B_XFRQ_TOGGLE_BIT (0x1<<6)
+#define USTORM_FCOE_PARAMS_B_XFRQ_TOGGLE_BIT_SHIFT 6
+#define USTORM_FCOE_PARAMS_B_C2_VALID (0x1<<7)
+#define USTORM_FCOE_PARAMS_B_C2_VALID_SHIFT 7
+#define USTORM_FCOE_PARAMS_B_ACK_0 (0x1<<8)
+#define USTORM_FCOE_PARAMS_B_ACK_0_SHIFT 8
+#define USTORM_FCOE_PARAMS_RSRV0 (0x7F<<9)
+#define USTORM_FCOE_PARAMS_RSRV0_SHIFT 9
+#elif defined(__LITTLE_ENDIAN)
+	u16 flags;
+#define USTORM_FCOE_PARAMS_B_MUL_N_PORT_IDS (0x1<<0)
+#define USTORM_FCOE_PARAMS_B_MUL_N_PORT_IDS_SHIFT 0
+#define USTORM_FCOE_PARAMS_B_E_D_TOV_RES (0x1<<1)
+#define USTORM_FCOE_PARAMS_B_E_D_TOV_RES_SHIFT 1
+#define USTORM_FCOE_PARAMS_B_CONT_INCR_SEQ_CNT (0x1<<2)
+#define USTORM_FCOE_PARAMS_B_CONT_INCR_SEQ_CNT_SHIFT 2
+#define USTORM_FCOE_PARAMS_B_CONF_REQ (0x1<<3)
+#define USTORM_FCOE_PARAMS_B_CONF_REQ_SHIFT 3
+#define USTORM_FCOE_PARAMS_B_REC_VALID (0x1<<4)
+#define USTORM_FCOE_PARAMS_B_REC_VALID_SHIFT 4
+#define USTORM_FCOE_PARAMS_B_CQ_TOGGLE_BIT (0x1<<5)
+#define USTORM_FCOE_PARAMS_B_CQ_TOGGLE_BIT_SHIFT 5
+#define USTORM_FCOE_PARAMS_B_XFRQ_TOGGLE_BIT (0x1<<6)
+#define USTORM_FCOE_PARAMS_B_XFRQ_TOGGLE_BIT_SHIFT 6
+#define USTORM_FCOE_PARAMS_B_C2_VALID (0x1<<7)
+#define USTORM_FCOE_PARAMS_B_C2_VALID_SHIFT 7
+#define USTORM_FCOE_PARAMS_B_ACK_0 (0x1<<8)
+#define USTORM_FCOE_PARAMS_B_ACK_0_SHIFT 8
+#define USTORM_FCOE_PARAMS_RSRV0 (0x7F<<9)
+#define USTORM_FCOE_PARAMS_RSRV0_SHIFT 9
+	u16 fcoe_conn_id;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 hc_csdm_byte_en;
+	u8 func_id;
+	u8 port_id;
+	u8 vnic_id;
+#elif defined(__LITTLE_ENDIAN)
+	u8 vnic_id;
+	u8 port_id;
+	u8 func_id;
+	u8 hc_csdm_byte_en;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 rx_total_conc_seqs;
+	u16 rx_max_fc_pay_len;
+#elif defined(__LITTLE_ENDIAN)
+	u16 rx_max_fc_pay_len;
+	u16 rx_total_conc_seqs;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 ox_id;
+	u16 rx_max_conc_seqs;
+#elif defined(__LITTLE_ENDIAN)
+	u16 rx_max_conc_seqs;
+	u16 ox_id;
+#endif
+};
+
+/*
+ * FCoE 16-bits index structure
+ */
+struct fcoe_idx16_fields {
+	u16 fields;
+#define FCOE_IDX16_FIELDS_IDX (0x7FFF<<0)
+#define FCOE_IDX16_FIELDS_IDX_SHIFT 0
+#define FCOE_IDX16_FIELDS_MSB (0x1<<15)
+#define FCOE_IDX16_FIELDS_MSB_SHIFT 15
+};
+
+/*
+ * FCoE 16-bits index union
+ */
+union fcoe_idx16_field_union {
+	struct fcoe_idx16_fields fields;
+	u16 val;
+};
+
+/*
+ * 4 regs size
+ */
+struct fcoe_bd_ctx {
+	u32 buf_addr_hi;
+	u32 buf_addr_lo;
+#if defined(__BIG_ENDIAN)
+	u16 rsrv0;
+	u16 buf_len;
+#elif defined(__LITTLE_ENDIAN)
+	u16 buf_len;
+	u16 rsrv0;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 rsrv1;
+	u16 flags;
+#elif defined(__LITTLE_ENDIAN)
+	u16 flags;
+	u16 rsrv1;
+#endif
+};
+
+/*
+ * Parameters required for placement according to SGL
+ */
+struct ustorm_fcoe_data_place {
+#if defined(__BIG_ENDIAN)
+	u16 cached_sge_off;
+	u8 cached_num_sges;
+	u8 cached_sge_idx;
+#elif defined(__LITTLE_ENDIAN)
+	u8 cached_sge_idx;
+	u8 cached_num_sges;
+	u16 cached_sge_off;
+#endif
+	struct fcoe_bd_ctx cached_sge[3];
+};
+
+struct fcoe_task_ctx_entry_txwr_rxrd {
+#if defined(__BIG_ENDIAN)
+	u16 verify_tx_seq;
+	u8 init_flags;
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_TASK_TYPE (0x7<<0)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_TASK_TYPE_SHIFT 0
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_DEV_TYPE (0x1<<3)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_DEV_TYPE_SHIFT 3
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_CLASS_TYPE (0x1<<4)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_CLASS_TYPE_SHIFT 4
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_SINGLE_SGE (0x1<<5)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_SINGLE_SGE_SHIFT 5
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_RSRV5 (0x3<<6)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_RSRV5_SHIFT 6
+	u8 tx_flags;
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_TX_STATE (0xF<<0)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_TX_STATE_SHIFT 0
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_RSRV4 (0xF<<4)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_RSRV4_SHIFT 4
+#elif defined(__LITTLE_ENDIAN)
+	u8 tx_flags;
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_TX_STATE (0xF<<0)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_TX_STATE_SHIFT 0
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_RSRV4 (0xF<<4)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_RSRV4_SHIFT 4
+	u8 init_flags;
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_TASK_TYPE (0x7<<0)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_TASK_TYPE_SHIFT 0
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_DEV_TYPE (0x1<<3)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_DEV_TYPE_SHIFT 3
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_CLASS_TYPE (0x1<<4)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_CLASS_TYPE_SHIFT 4
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_SINGLE_SGE (0x1<<5)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_SINGLE_SGE_SHIFT 5
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_RSRV5 (0x3<<6)
+#define FCOE_TASK_CTX_ENTRY_TXWR_RXRD_RSRV5_SHIFT 6
+	u16 verify_tx_seq;
+#endif
+};
+
+struct fcoe_fcp_cmd_payload {
+	u32 opaque[8];
+};
+
+struct fcoe_fc_hdr {
+#if defined(__BIG_ENDIAN)
+	u8 cs_ctl;
+	u8 s_id[3];
+#elif defined(__LITTLE_ENDIAN)
+	u8 s_id[3];
+	u8 cs_ctl;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 r_ctl;
+	u8 d_id[3];
+#elif defined(__LITTLE_ENDIAN)
+	u8 d_id[3];
+	u8 r_ctl;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 seq_id;
+	u8 df_ctl;
+	u16 seq_cnt;
+#elif defined(__LITTLE_ENDIAN)
+	u16 seq_cnt;
+	u8 df_ctl;
+	u8 seq_id;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 type;
+	u8 f_ctl[3];
+#elif defined(__LITTLE_ENDIAN)
+	u8 f_ctl[3];
+	u8 type;
+#endif
+	u32 parameters;
+#if defined(__BIG_ENDIAN)
+	u16 ox_id;
+	u16 rx_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 rx_id;
+	u16 ox_id;
+#endif
+};
+
+struct fcoe_fc_frame {
+	struct fcoe_fc_hdr fc_hdr;
+	u32 reserved0[2];
+};
+
+union fcoe_cmd_flow_info {
+	struct fcoe_fcp_cmd_payload fcp_cmd_payload;
+	struct fcoe_fc_frame mp_fc_frame;
+};
+
+struct fcoe_read_flow_info {
+	struct fcoe_fc_hdr fc_data_in_hdr;
+	u32 reserved[2];
+};
+
+struct fcoe_fcp_xfr_rdy_payload {
+	u32 burst_len;
+	u32 data_ro;
+};
+
+struct fcoe_write_flow_info {
+	struct fcoe_fc_hdr fc_data_out_hdr;
+	struct fcoe_fcp_xfr_rdy_payload fcp_xfr_payload;
+};
+
+struct fcoe_fcp_rsp_flags {
+	u8 flags;
+#define FCOE_FCP_RSP_FLAGS_FCP_RSP_LEN_VALID (0x1<<0)
+#define FCOE_FCP_RSP_FLAGS_FCP_RSP_LEN_VALID_SHIFT 0
+#define FCOE_FCP_RSP_FLAGS_FCP_SNS_LEN_VALID (0x1<<1)
+#define FCOE_FCP_RSP_FLAGS_FCP_SNS_LEN_VALID_SHIFT 1
+#define FCOE_FCP_RSP_FLAGS_FCP_RESID_OVER (0x1<<2)
+#define FCOE_FCP_RSP_FLAGS_FCP_RESID_OVER_SHIFT 2
+#define FCOE_FCP_RSP_FLAGS_FCP_RESID_UNDER (0x1<<3)
+#define FCOE_FCP_RSP_FLAGS_FCP_RESID_UNDER_SHIFT 3
+#define FCOE_FCP_RSP_FLAGS_FCP_CONF_REQ (0x1<<4)
+#define FCOE_FCP_RSP_FLAGS_FCP_CONF_REQ_SHIFT 4
+#define FCOE_FCP_RSP_FLAGS_FCP_BIDI_FLAGS (0x7<<5)
+#define FCOE_FCP_RSP_FLAGS_FCP_BIDI_FLAGS_SHIFT 5
+};
+
+struct fcoe_fcp_rsp_payload {
+	struct regpair reserved0;
+	u32 fcp_resid;
+#if defined(__BIG_ENDIAN)
+	u16 retry_delay_timer;
+	struct fcoe_fcp_rsp_flags fcp_flags;
+	u8 scsi_status_code;
+#elif defined(__LITTLE_ENDIAN)
+	u8 scsi_status_code;
+	struct fcoe_fcp_rsp_flags fcp_flags;
+	u16 retry_delay_timer;
+#endif
+	u32 fcp_rsp_len;
+	u32 fcp_sns_len;
+};
+
+/*
+ * Fixed size structure in order to plant it in Union structure
+ */
+struct fcoe_fcp_rsp_union {
+	struct fcoe_fcp_rsp_payload payload;
+	struct regpair reserved0;
+};
+
+/*
+ * Fixed size structure in order to plant it in Union structure
+ */
+struct fcoe_abts_rsp_union {
+	u32 r_ctl;
+	u32 abts_rsp_payload[7];
+};
+
+union fcoe_rsp_flow_info {
+	struct fcoe_fcp_rsp_union fcp_rsp;
+	struct fcoe_abts_rsp_union abts_rsp;
+};
+
+struct fcoe_cleanup_flow_info {
+#if defined(__BIG_ENDIAN)
+	u16 reserved1;
+	u16 task_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 task_id;
+	u16 reserved1;
+#endif
+	u32 reserved2[7];
+};
+
+/*
+ * 32 bytes used for general purposes
+ */
+union fcoe_general_task_ctx {
+	union fcoe_cmd_flow_info cmd_info;
+	struct fcoe_read_flow_info read_info;
+	struct fcoe_write_flow_info write_info;
+	union fcoe_rsp_flow_info rsp_info;
+	struct fcoe_cleanup_flow_info cleanup_info;
+	u32 comp_info[8];
+};
+
+struct fcoe_s_stat_ctx {
+	u8 flags;
+#define FCOE_S_STAT_CTX_ACTIVE (0x1<<0)
+#define FCOE_S_STAT_CTX_ACTIVE_SHIFT 0
+#define FCOE_S_STAT_CTX_ACK_ABORT_SEQ_COND (0x1<<1)
+#define FCOE_S_STAT_CTX_ACK_ABORT_SEQ_COND_SHIFT 1
+#define FCOE_S_STAT_CTX_ABTS_PERFORMED (0x1<<2)
+#define FCOE_S_STAT_CTX_ABTS_PERFORMED_SHIFT 2
+#define FCOE_S_STAT_CTX_SEQ_TIMEOUT (0x1<<3)
+#define FCOE_S_STAT_CTX_SEQ_TIMEOUT_SHIFT 3
+#define FCOE_S_STAT_CTX_P_RJT (0x1<<4)
+#define FCOE_S_STAT_CTX_P_RJT_SHIFT 4
+#define FCOE_S_STAT_CTX_ACK_EOFT (0x1<<5)
+#define FCOE_S_STAT_CTX_ACK_EOFT_SHIFT 5
+#define FCOE_S_STAT_CTX_RSRV1 (0x3<<6)
+#define FCOE_S_STAT_CTX_RSRV1_SHIFT 6
+};
+
+/*
+ * Common section. Both TX and RX processing might write and read from it in different flows
+ */
+struct fcoe_task_ctx_entry_tx_rx_cmn {
+	u32 data_2_trns;
+	union fcoe_general_task_ctx general;
+#if defined(__BIG_ENDIAN)
+	u16 tx_low_seq_cnt;
+	struct fcoe_s_stat_ctx tx_s_stat;
+	u8 tx_seq_id;
+#elif defined(__LITTLE_ENDIAN)
+	u8 tx_seq_id;
+	struct fcoe_s_stat_ctx tx_s_stat;
+	u16 tx_low_seq_cnt;
+#endif
+	u32 common_flags;
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_CID (0xFFFFFF<<0)
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_CID_SHIFT 0
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_VALID (0x1<<24)
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_VALID_SHIFT 24
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_SEQ_INIT (0x1<<25)
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_SEQ_INIT_SHIFT 25
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_PEND_XFER (0x1<<26)
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_PEND_XFER_SHIFT 26
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_PEND_CONF (0x1<<27)
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_PEND_CONF_SHIFT 27
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_EXP_FIRST_FRAME (0x1<<28)
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_EXP_FIRST_FRAME_SHIFT 28
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_RSRV (0x7<<29)
+#define FCOE_TASK_CTX_ENTRY_TX_RX_CMN_RSRV_SHIFT 29
+};
+
+struct fcoe_task_ctx_entry_rxwr_txrd {
+#if defined(__BIG_ENDIAN)
+	u16 rx_id;
+	u16 rx_flags;
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_RX_STATE (0xF<<0)
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_RX_STATE_SHIFT 0
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_NUM_RQ_WQE (0x7<<4)
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_NUM_RQ_WQE_SHIFT 4
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_CONF_REQ (0x1<<7)
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_CONF_REQ_SHIFT 7
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_MISS_FRAME (0x1<<8)
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_MISS_FRAME_SHIFT 8
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_RESERVED0 (0x7F<<9)
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_RESERVED0_SHIFT 9
+#elif defined(__LITTLE_ENDIAN)
+	u16 rx_flags;
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_RX_STATE (0xF<<0)
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_RX_STATE_SHIFT 0
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_NUM_RQ_WQE (0x7<<4)
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_NUM_RQ_WQE_SHIFT 4
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_CONF_REQ (0x1<<7)
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_CONF_REQ_SHIFT 7
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_MISS_FRAME (0x1<<8)
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_MISS_FRAME_SHIFT 8
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_RESERVED0 (0x7F<<9)
+#define FCOE_TASK_CTX_ENTRY_RXWR_TXRD_RESERVED0_SHIFT 9
+	u16 rx_id;
+#endif
+};
+
+struct fcoe_seq_ctx {
+#if defined(__BIG_ENDIAN)
+	u16 low_seq_cnt;
+	struct fcoe_s_stat_ctx s_stat;
+	u8 seq_id;
+#elif defined(__LITTLE_ENDIAN)
+	u8 seq_id;
+	struct fcoe_s_stat_ctx s_stat;
+	u16 low_seq_cnt;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 err_seq_cnt;
+	u16 high_seq_cnt;
+#elif defined(__LITTLE_ENDIAN)
+	u16 high_seq_cnt;
+	u16 err_seq_cnt;
+#endif
+	u32 low_exp_ro;
+	u32 high_exp_ro;
+};
+
+struct fcoe_single_sge_ctx {
+	struct regpair cur_buf_addr;
+#if defined(__BIG_ENDIAN)
+	u16 reserved0;
+	u16 cur_buf_rem;
+#elif defined(__LITTLE_ENDIAN)
+	u16 cur_buf_rem;
+	u16 reserved0;
+#endif
+};
+
+struct fcoe_mul_sges_ctx {
+	struct regpair cur_sge_addr;
+#if defined(__BIG_ENDIAN)
+	u8 sgl_size;
+	u8 cur_sge_idx;
+	u16 cur_sge_off;
+#elif defined(__LITTLE_ENDIAN)
+	u16 cur_sge_off;
+	u8 cur_sge_idx;
+	u8 sgl_size;
+#endif
+};
+
+union fcoe_sgl_ctx {
+	struct fcoe_single_sge_ctx single_sge;
+	struct fcoe_mul_sges_ctx mul_sges;
+};
+
+struct fcoe_task_ctx_entry_rx_only {
+	struct fcoe_seq_ctx seq_ctx;
+	struct fcoe_seq_ctx ooo_seq_ctx;
+	u32 rsrv3;
+	union fcoe_sgl_ctx sgl_ctx;
+};
+
+struct ustorm_fcoe_task_ctx_entry_rd {
+	struct fcoe_task_ctx_entry_txwr_rxrd tx_wr_rx_rd;
+	struct fcoe_task_ctx_entry_tx_rx_cmn cmn;
+	struct fcoe_task_ctx_entry_rxwr_txrd rx_wr_tx_rd;
+	struct fcoe_task_ctx_entry_rx_only rx_wr;
+	u32 reserved;
+};
+
+/*
+ * Ustorm FCoE Storm Context
+ */
+struct ustorm_fcoe_st_context {
+	struct ustorm_fcoe_params fcoe_params;
+	struct regpair task_addr;
+	struct regpair cq_base_addr;
+	struct regpair rq_pbl_base;
+	struct regpair rq_cur_page_addr;
+	struct regpair confq_pbl_base_addr;
+	struct regpair conn_db_base;
+	struct regpair xfrq_base_addr;
+	struct regpair lcq_base_addr;
+#if defined(__BIG_ENDIAN)
+	union fcoe_idx16_field_union rq_cons;
+	union fcoe_idx16_field_union rq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	union fcoe_idx16_field_union rq_prod;
+	union fcoe_idx16_field_union rq_cons;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 xfrq_prod;
+	u16 cq_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 cq_cons;
+	u16 xfrq_prod;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 lcq_cons;
+	u16 hc_cram_address;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hc_cram_address;
+	u16 lcq_cons;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 sq_xfrq_lcq_confq_size;
+	u16 confq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 confq_prod;
+	u16 sq_xfrq_lcq_confq_size;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 hc_csdm_agg_int;
+	u8 flags;
+#define USTORM_FCOE_ST_CONTEXT_MID_SEQ_PROC_FLAG (0x1<<0)
+#define USTORM_FCOE_ST_CONTEXT_MID_SEQ_PROC_FLAG_SHIFT 0
+#define USTORM_FCOE_ST_CONTEXT_CACHED_CONN_FLAG (0x1<<1)
+#define USTORM_FCOE_ST_CONTEXT_CACHED_CONN_FLAG_SHIFT 1
+#define USTORM_FCOE_ST_CONTEXT_CACHED_TCE_FLAG (0x1<<2)
+#define USTORM_FCOE_ST_CONTEXT_CACHED_TCE_FLAG_SHIFT 2
+#define USTORM_FCOE_ST_CONTEXT_RSRV1 (0x1F<<3)
+#define USTORM_FCOE_ST_CONTEXT_RSRV1_SHIFT 3
+	u8 available_rqes;
+	u8 sp_q_flush_cnt;
+#elif defined(__LITTLE_ENDIAN)
+	u8 sp_q_flush_cnt;
+	u8 available_rqes;
+	u8 flags;
+#define USTORM_FCOE_ST_CONTEXT_MID_SEQ_PROC_FLAG (0x1<<0)
+#define USTORM_FCOE_ST_CONTEXT_MID_SEQ_PROC_FLAG_SHIFT 0
+#define USTORM_FCOE_ST_CONTEXT_CACHED_CONN_FLAG (0x1<<1)
+#define USTORM_FCOE_ST_CONTEXT_CACHED_CONN_FLAG_SHIFT 1
+#define USTORM_FCOE_ST_CONTEXT_CACHED_TCE_FLAG (0x1<<2)
+#define USTORM_FCOE_ST_CONTEXT_CACHED_TCE_FLAG_SHIFT 2
+#define USTORM_FCOE_ST_CONTEXT_RSRV1 (0x1F<<3)
+#define USTORM_FCOE_ST_CONTEXT_RSRV1_SHIFT 3
+	u8 hc_csdm_agg_int;
+#endif
+	struct ustorm_fcoe_data_place data_place;
+	struct ustorm_fcoe_task_ctx_entry_rd tce;
+};
+
+/*
+ * The FCoE non-aggregative context of Tstorm
+ */
+struct tstorm_fcoe_st_context {
+	struct regpair reserved0;
+	struct regpair reserved1;
+};
+
+/*
+ * The fcoe aggregative context section of Xstorm
+ */
+struct xstorm_fcoe_extra_ag_context_section {
+#if defined(__BIG_ENDIAN)
+	u8 tcp_agg_vars1;
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED51 (0x3<<0)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED51_SHIFT 0
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED (0x3<<2)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED_SHIFT 2
+#define XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_PBF_TX_SEQ_ACK_CF (0x3<<4)
+#define XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_PBF_TX_SEQ_ACK_CF_SHIFT 4
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_CLEAR_DA_TIMER_EN (0x1<<6)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_CLEAR_DA_TIMER_EN_SHIFT 6
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_DA_EXPIRATION_FLAG (0x1<<7)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_DA_EXPIRATION_FLAG_SHIFT 7
+	u8 __reserved_da_cnt;
+	u16 __mtu;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __mtu;
+	u8 __reserved_da_cnt;
+	u8 tcp_agg_vars1;
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED51 (0x3<<0)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED51_SHIFT 0
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED (0x3<<2)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED_SHIFT 2
+#define XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_PBF_TX_SEQ_ACK_CF (0x3<<4)
+#define XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_PBF_TX_SEQ_ACK_CF_SHIFT 4
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_CLEAR_DA_TIMER_EN (0x1<<6)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_CLEAR_DA_TIMER_EN_SHIFT 6
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_DA_EXPIRATION_FLAG (0x1<<7)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_DA_EXPIRATION_FLAG_SHIFT 7
+#endif
+	u32 __task_addr_lo;
+	u32 __task_addr_hi;
+	u32 __reserved55;
+	u32 __tx_prods;
+#if defined(__BIG_ENDIAN)
+	u8 __agg_val8_th;
+	u8 __agg_val8;
+	u16 tcp_agg_vars2;
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED57 (0x1<<0)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED57_SHIFT 0
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED58 (0x1<<1)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED58_SHIFT 1
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED59 (0x1<<2)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED59_SHIFT 2
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX3_FLAG (0x1<<3)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX3_FLAG_SHIFT 3
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX4_FLAG (0x1<<4)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX4_FLAG_SHIFT 4
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED60 (0x1<<5)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED60_SHIFT 5
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_ACK_TO_FE_UPDATED_EN (0x1<<6)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_ACK_TO_FE_UPDATED_EN_SHIFT 6
+#define XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_PBF_TX_SEQ_ACK_CF_EN (0x1<<7)
+#define XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_PBF_TX_SEQ_ACK_CF_EN_SHIFT 7
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_TX_FIN_FLAG_EN (0x1<<8)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_TX_FIN_FLAG_EN_SHIFT 8
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX1_FLAG (0x1<<9)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX1_FLAG_SHIFT 9
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_SET_RTO_CF (0x3<<10)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_SET_RTO_CF_SHIFT 10
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF (0x3<<12)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF_SHIFT 12
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX8_CF (0x3<<14)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX8_CF_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 tcp_agg_vars2;
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED57 (0x1<<0)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED57_SHIFT 0
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED58 (0x1<<1)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED58_SHIFT 1
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED59 (0x1<<2)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED59_SHIFT 2
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX3_FLAG (0x1<<3)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX3_FLAG_SHIFT 3
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX4_FLAG (0x1<<4)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX4_FLAG_SHIFT 4
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED60 (0x1<<5)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED60_SHIFT 5
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_ACK_TO_FE_UPDATED_EN (0x1<<6)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_ACK_TO_FE_UPDATED_EN_SHIFT 6
+#define XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_PBF_TX_SEQ_ACK_CF_EN (0x1<<7)
+#define XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_PBF_TX_SEQ_ACK_CF_EN_SHIFT 7
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_TX_FIN_FLAG_EN (0x1<<8)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED_TX_FIN_FLAG_EN_SHIFT 8
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX1_FLAG (0x1<<9)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX1_FLAG_SHIFT 9
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_SET_RTO_CF (0x3<<10)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_SET_RTO_CF_SHIFT 10
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF (0x3<<12)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF_SHIFT 12
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX8_CF (0x3<<14)
+#define __XSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX8_CF_SHIFT 14
+	u8 __agg_val8;
+	u8 __agg_val8_th;
+#endif
+	u32 __sq_base_addr_lo;
+	u32 __sq_base_addr_hi;
+	u32 __xfrq_base_addr_lo;
+	u32 __xfrq_base_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u16 __xfrq_cons;
+	u16 __xfrq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __xfrq_prod;
+	u16 __xfrq_cons;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 __tcp_agg_vars5;
+	u8 __tcp_agg_vars4;
+	u8 __tcp_agg_vars3;
+	u8 __reserved_force_pure_ack_cnt;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __reserved_force_pure_ack_cnt;
+	u8 __tcp_agg_vars3;
+	u8 __tcp_agg_vars4;
+	u8 __tcp_agg_vars5;
+#endif
+	u32 __tcp_agg_vars6;
+#if defined(__BIG_ENDIAN)
+	u16 __agg_misc6;
+	u16 __tcp_agg_vars7;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __tcp_agg_vars7;
+	u16 __agg_misc6;
+#endif
+	u32 __agg_val10;
+	u32 __agg_val10_th;
+#if defined(__BIG_ENDIAN)
+	u16 __reserved3;
+	u8 __reserved2;
+	u8 __da_only_cnt;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __da_only_cnt;
+	u8 __reserved2;
+	u16 __reserved3;
+#endif
+};
+
+/*
+ * The fcoe aggregative context of Xstorm
+ */
+struct xstorm_fcoe_ag_context {
+#if defined(__BIG_ENDIAN)
+	u16 agg_val1;
+	u8 agg_vars1;
+#define __XSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __XSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define __XSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define __XSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED51 (0x1<<2)
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED51_SHIFT 2
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED52 (0x1<<3)
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED52_SHIFT 3
+#define __XSTORM_FCOE_AG_CONTEXT_MORE_TO_SEND_EN (0x1<<4)
+#define __XSTORM_FCOE_AG_CONTEXT_MORE_TO_SEND_EN_SHIFT 4
+#define XSTORM_FCOE_AG_CONTEXT_NAGLE_EN (0x1<<5)
+#define XSTORM_FCOE_AG_CONTEXT_NAGLE_EN_SHIFT 5
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_SPARE_FLAG (0x1<<6)
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_SPARE_FLAG_SHIFT 6
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED_UNA_GT_NXT_EN (0x1<<7)
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED_UNA_GT_NXT_EN_SHIFT 7
+	u8 __state;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __state;
+	u8 agg_vars1;
+#define __XSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __XSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define __XSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define __XSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED51 (0x1<<2)
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED51_SHIFT 2
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED52 (0x1<<3)
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED52_SHIFT 3
+#define __XSTORM_FCOE_AG_CONTEXT_MORE_TO_SEND_EN (0x1<<4)
+#define __XSTORM_FCOE_AG_CONTEXT_MORE_TO_SEND_EN_SHIFT 4
+#define XSTORM_FCOE_AG_CONTEXT_NAGLE_EN (0x1<<5)
+#define XSTORM_FCOE_AG_CONTEXT_NAGLE_EN_SHIFT 5
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_SPARE_FLAG (0x1<<6)
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_SPARE_FLAG_SHIFT 6
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED_UNA_GT_NXT_EN (0x1<<7)
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED_UNA_GT_NXT_EN_SHIFT 7
+	u16 agg_val1;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 cdu_reserved;
+	u8 __agg_vars4;
+	u8 agg_vars3;
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM2 (0x3F<<0)
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM2_SHIFT 0
+#define __XSTORM_FCOE_AG_CONTEXT_AUX19_CF (0x3<<6)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX19_CF_SHIFT 6
+	u8 agg_vars2;
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_CF (0x3<<0)
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_CF_SHIFT 0
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_SPARE_FLAG_EN (0x1<<2)
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_SPARE_FLAG_EN_SHIFT 2
+#define __XSTORM_FCOE_AG_CONTEXT_AUX8_FLAG (0x1<<3)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX8_FLAG_SHIFT 3
+#define __XSTORM_FCOE_AG_CONTEXT_AUX9_FLAG (0x1<<4)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX9_FLAG_SHIFT 4
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE1 (0x3<<5)
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE1_SHIFT 5
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+#elif defined(__LITTLE_ENDIAN)
+	u8 agg_vars2;
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_CF (0x3<<0)
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_CF_SHIFT 0
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_SPARE_FLAG_EN (0x1<<2)
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_SPARE_FLAG_EN_SHIFT 2
+#define __XSTORM_FCOE_AG_CONTEXT_AUX8_FLAG (0x1<<3)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX8_FLAG_SHIFT 3
+#define __XSTORM_FCOE_AG_CONTEXT_AUX9_FLAG (0x1<<4)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX9_FLAG_SHIFT 4
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE1 (0x3<<5)
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE1_SHIFT 5
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __XSTORM_FCOE_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+	u8 agg_vars3;
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM2 (0x3F<<0)
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM2_SHIFT 0
+#define __XSTORM_FCOE_AG_CONTEXT_AUX19_CF (0x3<<6)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX19_CF_SHIFT 6
+	u8 __agg_vars4;
+	u8 cdu_reserved;
+#endif
+	u32 more_to_send;
+#if defined(__BIG_ENDIAN)
+	u16 agg_vars5;
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE5 (0x3<<0)
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE5_SHIFT 0
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM0 (0x3F<<2)
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM0_SHIFT 2
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM1 (0x3F<<8)
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM1_SHIFT 8
+#define __XSTORM_FCOE_AG_CONTEXT_CONFQ_DEC_RULE (0x3<<14)
+#define __XSTORM_FCOE_AG_CONTEXT_CONFQ_DEC_RULE_SHIFT 14
+	u16 sq_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_cons;
+	u16 agg_vars5;
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE5 (0x3<<0)
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE5_SHIFT 0
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM0 (0x3F<<2)
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM0_SHIFT 2
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM1 (0x3F<<8)
+#define XSTORM_FCOE_AG_CONTEXT_PHYSICAL_QUEUE_NUM1_SHIFT 8
+#define __XSTORM_FCOE_AG_CONTEXT_CONFQ_DEC_RULE (0x3<<14)
+#define __XSTORM_FCOE_AG_CONTEXT_CONFQ_DEC_RULE_SHIFT 14
+#endif
+	struct xstorm_fcoe_extra_ag_context_section __extra_section;
+#if defined(__BIG_ENDIAN)
+	u16 agg_vars7;
+#define __XSTORM_FCOE_AG_CONTEXT_AGG_VAL11_DECISION_RULE (0x7<<0)
+#define __XSTORM_FCOE_AG_CONTEXT_AGG_VAL11_DECISION_RULE_SHIFT 0
+#define __XSTORM_FCOE_AG_CONTEXT_AUX13_FLAG (0x1<<3)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX13_FLAG_SHIFT 3
+#define __XSTORM_FCOE_AG_CONTEXT_QUEUE0_CF (0x3<<4)
+#define __XSTORM_FCOE_AG_CONTEXT_QUEUE0_CF_SHIFT 4
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE3 (0x3<<6)
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE3_SHIFT 6
+#define XSTORM_FCOE_AG_CONTEXT_AUX1_CF (0x3<<8)
+#define XSTORM_FCOE_AG_CONTEXT_AUX1_CF_SHIFT 8
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED62 (0x1<<10)
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED62_SHIFT 10
+#define __XSTORM_FCOE_AG_CONTEXT_AUX1_CF_EN (0x1<<11)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX1_CF_EN_SHIFT 11
+#define __XSTORM_FCOE_AG_CONTEXT_AUX10_FLAG (0x1<<12)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX10_FLAG_SHIFT 12
+#define __XSTORM_FCOE_AG_CONTEXT_AUX11_FLAG (0x1<<13)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX11_FLAG_SHIFT 13
+#define __XSTORM_FCOE_AG_CONTEXT_AUX12_FLAG (0x1<<14)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX12_FLAG_SHIFT 14
+#define __XSTORM_FCOE_AG_CONTEXT_AUX2_FLAG (0x1<<15)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX2_FLAG_SHIFT 15
+	u8 agg_val3_th;
+	u8 agg_vars6;
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE6 (0x7<<0)
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE6_SHIFT 0
+#define __XSTORM_FCOE_AG_CONTEXT_XFRQ_DEC_RULE (0x7<<3)
+#define __XSTORM_FCOE_AG_CONTEXT_XFRQ_DEC_RULE_SHIFT 3
+#define __XSTORM_FCOE_AG_CONTEXT_SQ_DEC_RULE (0x3<<6)
+#define __XSTORM_FCOE_AG_CONTEXT_SQ_DEC_RULE_SHIFT 6
+#elif defined(__LITTLE_ENDIAN)
+	u8 agg_vars6;
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE6 (0x7<<0)
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE6_SHIFT 0
+#define __XSTORM_FCOE_AG_CONTEXT_XFRQ_DEC_RULE (0x7<<3)
+#define __XSTORM_FCOE_AG_CONTEXT_XFRQ_DEC_RULE_SHIFT 3
+#define __XSTORM_FCOE_AG_CONTEXT_SQ_DEC_RULE (0x3<<6)
+#define __XSTORM_FCOE_AG_CONTEXT_SQ_DEC_RULE_SHIFT 6
+	u8 agg_val3_th;
+	u16 agg_vars7;
+#define __XSTORM_FCOE_AG_CONTEXT_AGG_VAL11_DECISION_RULE (0x7<<0)
+#define __XSTORM_FCOE_AG_CONTEXT_AGG_VAL11_DECISION_RULE_SHIFT 0
+#define __XSTORM_FCOE_AG_CONTEXT_AUX13_FLAG (0x1<<3)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX13_FLAG_SHIFT 3
+#define __XSTORM_FCOE_AG_CONTEXT_QUEUE0_CF (0x3<<4)
+#define __XSTORM_FCOE_AG_CONTEXT_QUEUE0_CF_SHIFT 4
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE3 (0x3<<6)
+#define XSTORM_FCOE_AG_CONTEXT_DECISION_RULE3_SHIFT 6
+#define XSTORM_FCOE_AG_CONTEXT_AUX1_CF (0x3<<8)
+#define XSTORM_FCOE_AG_CONTEXT_AUX1_CF_SHIFT 8
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED62 (0x1<<10)
+#define __XSTORM_FCOE_AG_CONTEXT_RESERVED62_SHIFT 10
+#define __XSTORM_FCOE_AG_CONTEXT_AUX1_CF_EN (0x1<<11)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX1_CF_EN_SHIFT 11
+#define __XSTORM_FCOE_AG_CONTEXT_AUX10_FLAG (0x1<<12)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX10_FLAG_SHIFT 12
+#define __XSTORM_FCOE_AG_CONTEXT_AUX11_FLAG (0x1<<13)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX11_FLAG_SHIFT 13
+#define __XSTORM_FCOE_AG_CONTEXT_AUX12_FLAG (0x1<<14)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX12_FLAG_SHIFT 14
+#define __XSTORM_FCOE_AG_CONTEXT_AUX2_FLAG (0x1<<15)
+#define __XSTORM_FCOE_AG_CONTEXT_AUX2_FLAG_SHIFT 15
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val11_th;
+	u16 __agg_val11;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_val11;
+	u16 __agg_val11_th;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 __reserved1;
+	u8 __agg_val6_th;
+	u16 __confq_tx_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __confq_tx_prod;
+	u8 __agg_val6_th;
+	u8 __reserved1;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 confq_cons;
+	u16 confq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 confq_prod;
+	u16 confq_cons;
+#endif
+	u32 agg_vars8;
+#define __XSTORM_FCOE_AG_CONTEXT_CACHE_WQE_IDX (0xFFFFFF<<0)
+#define __XSTORM_FCOE_AG_CONTEXT_CACHE_WQE_IDX_SHIFT 0
+#define XSTORM_FCOE_AG_CONTEXT_AGG_MISC3 (0xFF<<24)
+#define XSTORM_FCOE_AG_CONTEXT_AGG_MISC3_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 ox_id;
+	u16 sq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_prod;
+	u16 ox_id;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 agg_val3;
+	u8 agg_val6;
+	u8 agg_val5_th;
+	u8 agg_val5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 agg_val5;
+	u8 agg_val5_th;
+	u8 agg_val6;
+	u8 agg_val3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __pbf_tx_seq_ack;
+	u16 agg_limit1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_limit1;
+	u16 __pbf_tx_seq_ack;
+#endif
+	u32 completion_seq;
+	u32 confq_pbl_base_lo;
+	u32 confq_pbl_base_hi;
+};
+
+/*
+ * The fcoe extra aggregative context section of Tstorm
+ */
+struct tstorm_fcoe_extra_ag_context_section {
+	u32 __agg_val1;
+#if defined(__BIG_ENDIAN)
+	u8 __tcp_agg_vars2;
+	u8 __agg_val3;
+	u16 __agg_val2;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_val2;
+	u8 __agg_val3;
+	u8 __tcp_agg_vars2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val5;
+	u8 __agg_val6;
+	u8 __tcp_agg_vars3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __tcp_agg_vars3;
+	u8 __agg_val6;
+	u16 __agg_val5;
+#endif
+	u32 __lcq_prod;
+	u32 rtt_seq;
+	u32 rtt_time;
+	u32 __reserved66;
+	u32 wnd_right_edge;
+	u32 tcp_agg_vars1;
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_FIN_SENT_FLAG (0x1<<0)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_FIN_SENT_FLAG_SHIFT 0
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_LAST_PACKET_FIN_FLAG (0x1<<1)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_LAST_PACKET_FIN_FLAG_SHIFT 1
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_WND_UPD_CF (0x3<<2)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_WND_UPD_CF_SHIFT 2
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_TIMEOUT_CF (0x3<<4)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_TIMEOUT_CF_SHIFT 4
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_WND_UPD_CF_EN (0x1<<6)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_WND_UPD_CF_EN_SHIFT 6
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_TIMEOUT_CF_EN (0x1<<7)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_TIMEOUT_CF_EN_SHIFT 7
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RETRANSMIT_SEQ_EN (0x1<<8)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RETRANSMIT_SEQ_EN_SHIFT 8
+#define __TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_LCQ_SND_EN (0x1<<9)
+#define __TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_LCQ_SND_EN_SHIFT 9
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX1_FLAG (0x1<<10)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX1_FLAG_SHIFT 10
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX2_FLAG (0x1<<11)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX2_FLAG_SHIFT 11
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX1_CF_EN (0x1<<12)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX1_CF_EN_SHIFT 12
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX2_CF_EN (0x1<<13)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX2_CF_EN_SHIFT 13
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX1_CF (0x3<<14)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX1_CF_SHIFT 14
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX2_CF (0x3<<16)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX2_CF_SHIFT 16
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_TX_BLOCKED (0x1<<18)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_TX_BLOCKED_SHIFT 18
+#define __TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX10_CF_EN (0x1<<19)
+#define __TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX10_CF_EN_SHIFT 19
+#define __TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX11_CF_EN (0x1<<20)
+#define __TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX11_CF_EN_SHIFT 20
+#define __TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX12_CF_EN (0x1<<21)
+#define __TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_AUX12_CF_EN_SHIFT 21
+#define __TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED1 (0x3<<22)
+#define __TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RESERVED1_SHIFT 22
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RETRANSMIT_PEND_SEQ (0xF<<24)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RETRANSMIT_PEND_SEQ_SHIFT 24
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RETRANSMIT_DONE_SEQ (0xF<<28)
+#define TSTORM_FCOE_EXTRA_AG_CONTEXT_SECTION_RETRANSMIT_DONE_SEQ_SHIFT 28
+	u32 snd_max;
+	u32 __lcq_cons;
+	u32 __reserved2;
+};
+
+/*
+ * The fcoe aggregative context of Tstorm
+ */
+struct tstorm_fcoe_ag_context {
+#if defined(__BIG_ENDIAN)
+	u16 ulp_credit;
+	u8 agg_vars1;
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define __TSTORM_FCOE_AG_CONTEXT_QUEUE0_FLUSH_CF (0x3<<4)
+#define __TSTORM_FCOE_AG_CONTEXT_QUEUE0_FLUSH_CF_SHIFT 4
+#define __TSTORM_FCOE_AG_CONTEXT_AUX3_FLAG (0x1<<6)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX3_FLAG_SHIFT 6
+#define __TSTORM_FCOE_AG_CONTEXT_AUX4_FLAG (0x1<<7)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX4_FLAG_SHIFT 7
+	u8 state;
+#elif defined(__LITTLE_ENDIAN)
+	u8 state;
+	u8 agg_vars1;
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define TSTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define __TSTORM_FCOE_AG_CONTEXT_QUEUE0_FLUSH_CF (0x3<<4)
+#define __TSTORM_FCOE_AG_CONTEXT_QUEUE0_FLUSH_CF_SHIFT 4
+#define __TSTORM_FCOE_AG_CONTEXT_AUX3_FLAG (0x1<<6)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX3_FLAG_SHIFT 6
+#define __TSTORM_FCOE_AG_CONTEXT_AUX4_FLAG (0x1<<7)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX4_FLAG_SHIFT 7
+	u16 ulp_credit;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val4;
+	u16 agg_vars2;
+#define __TSTORM_FCOE_AG_CONTEXT_AUX5_FLAG (0x1<<0)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX5_FLAG_SHIFT 0
+#define __TSTORM_FCOE_AG_CONTEXT_AUX6_FLAG (0x1<<1)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX6_FLAG_SHIFT 1
+#define __TSTORM_FCOE_AG_CONTEXT_AUX4_CF (0x3<<2)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX4_CF_SHIFT 2
+#define __TSTORM_FCOE_AG_CONTEXT_AUX5_CF (0x3<<4)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX5_CF_SHIFT 4
+#define __TSTORM_FCOE_AG_CONTEXT_AUX6_CF (0x3<<6)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX6_CF_SHIFT 6
+#define __TSTORM_FCOE_AG_CONTEXT_AUX7_CF (0x3<<8)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX7_CF_SHIFT 8
+#define __TSTORM_FCOE_AG_CONTEXT_AUX7_FLAG (0x1<<10)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX7_FLAG_SHIFT 10
+#define __TSTORM_FCOE_AG_CONTEXT_QUEUE0_FLUSH_CF_EN (0x1<<11)
+#define __TSTORM_FCOE_AG_CONTEXT_QUEUE0_FLUSH_CF_EN_SHIFT 11
+#define TSTORM_FCOE_AG_CONTEXT_AUX4_CF_EN (0x1<<12)
+#define TSTORM_FCOE_AG_CONTEXT_AUX4_CF_EN_SHIFT 12
+#define TSTORM_FCOE_AG_CONTEXT_AUX5_CF_EN (0x1<<13)
+#define TSTORM_FCOE_AG_CONTEXT_AUX5_CF_EN_SHIFT 13
+#define TSTORM_FCOE_AG_CONTEXT_AUX6_CF_EN (0x1<<14)
+#define TSTORM_FCOE_AG_CONTEXT_AUX6_CF_EN_SHIFT 14
+#define TSTORM_FCOE_AG_CONTEXT_AUX7_CF_EN (0x1<<15)
+#define TSTORM_FCOE_AG_CONTEXT_AUX7_CF_EN_SHIFT 15
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_vars2;
+#define __TSTORM_FCOE_AG_CONTEXT_AUX5_FLAG (0x1<<0)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX5_FLAG_SHIFT 0
+#define __TSTORM_FCOE_AG_CONTEXT_AUX6_FLAG (0x1<<1)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX6_FLAG_SHIFT 1
+#define __TSTORM_FCOE_AG_CONTEXT_AUX4_CF (0x3<<2)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX4_CF_SHIFT 2
+#define __TSTORM_FCOE_AG_CONTEXT_AUX5_CF (0x3<<4)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX5_CF_SHIFT 4
+#define __TSTORM_FCOE_AG_CONTEXT_AUX6_CF (0x3<<6)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX6_CF_SHIFT 6
+#define __TSTORM_FCOE_AG_CONTEXT_AUX7_CF (0x3<<8)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX7_CF_SHIFT 8
+#define __TSTORM_FCOE_AG_CONTEXT_AUX7_FLAG (0x1<<10)
+#define __TSTORM_FCOE_AG_CONTEXT_AUX7_FLAG_SHIFT 10
+#define __TSTORM_FCOE_AG_CONTEXT_QUEUE0_FLUSH_CF_EN (0x1<<11)
+#define __TSTORM_FCOE_AG_CONTEXT_QUEUE0_FLUSH_CF_EN_SHIFT 11
+#define TSTORM_FCOE_AG_CONTEXT_AUX4_CF_EN (0x1<<12)
+#define TSTORM_FCOE_AG_CONTEXT_AUX4_CF_EN_SHIFT 12
+#define TSTORM_FCOE_AG_CONTEXT_AUX5_CF_EN (0x1<<13)
+#define TSTORM_FCOE_AG_CONTEXT_AUX5_CF_EN_SHIFT 13
+#define TSTORM_FCOE_AG_CONTEXT_AUX6_CF_EN (0x1<<14)
+#define TSTORM_FCOE_AG_CONTEXT_AUX6_CF_EN_SHIFT 14
+#define TSTORM_FCOE_AG_CONTEXT_AUX7_CF_EN (0x1<<15)
+#define TSTORM_FCOE_AG_CONTEXT_AUX7_CF_EN_SHIFT 15
+	u16 __agg_val4;
+#endif
+	struct tstorm_fcoe_extra_ag_context_section __extra_section;
+};
+
+/*
+ * The fcoe aggregative context of Ustorm
+ */
+struct ustorm_fcoe_ag_context {
+#if defined(__BIG_ENDIAN)
+	u8 __aux_counter_flags;
+	u8 agg_vars2;
+#define USTORM_FCOE_AG_CONTEXT_TX_CF (0x3<<0)
+#define USTORM_FCOE_AG_CONTEXT_TX_CF_SHIFT 0
+#define __USTORM_FCOE_AG_CONTEXT_TIMER_CF (0x3<<2)
+#define __USTORM_FCOE_AG_CONTEXT_TIMER_CF_SHIFT 2
+#define USTORM_FCOE_AG_CONTEXT_AGG_MISC4_RULE (0x7<<4)
+#define USTORM_FCOE_AG_CONTEXT_AGG_MISC4_RULE_SHIFT 4
+#define __USTORM_FCOE_AG_CONTEXT_AGG_VAL2_MASK (0x1<<7)
+#define __USTORM_FCOE_AG_CONTEXT_AGG_VAL2_MASK_SHIFT 7
+	u8 agg_vars1;
+#define __USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define USTORM_FCOE_AG_CONTEXT_INV_CF (0x3<<4)
+#define USTORM_FCOE_AG_CONTEXT_INV_CF_SHIFT 4
+#define USTORM_FCOE_AG_CONTEXT_COMPLETION_CF (0x3<<6)
+#define USTORM_FCOE_AG_CONTEXT_COMPLETION_CF_SHIFT 6
+	u8 state;
+#elif defined(__LITTLE_ENDIAN)
+	u8 state;
+	u8 agg_vars1;
+#define __USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define USTORM_FCOE_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define USTORM_FCOE_AG_CONTEXT_INV_CF (0x3<<4)
+#define USTORM_FCOE_AG_CONTEXT_INV_CF_SHIFT 4
+#define USTORM_FCOE_AG_CONTEXT_COMPLETION_CF (0x3<<6)
+#define USTORM_FCOE_AG_CONTEXT_COMPLETION_CF_SHIFT 6
+	u8 agg_vars2;
+#define USTORM_FCOE_AG_CONTEXT_TX_CF (0x3<<0)
+#define USTORM_FCOE_AG_CONTEXT_TX_CF_SHIFT 0
+#define __USTORM_FCOE_AG_CONTEXT_TIMER_CF (0x3<<2)
+#define __USTORM_FCOE_AG_CONTEXT_TIMER_CF_SHIFT 2
+#define USTORM_FCOE_AG_CONTEXT_AGG_MISC4_RULE (0x7<<4)
+#define USTORM_FCOE_AG_CONTEXT_AGG_MISC4_RULE_SHIFT 4
+#define __USTORM_FCOE_AG_CONTEXT_AGG_VAL2_MASK (0x1<<7)
+#define __USTORM_FCOE_AG_CONTEXT_AGG_VAL2_MASK_SHIFT 7
+	u8 __aux_counter_flags;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 cdu_usage;
+	u8 agg_misc2;
+	u16 pbf_tx_seq_ack;
+#elif defined(__LITTLE_ENDIAN)
+	u16 pbf_tx_seq_ack;
+	u8 agg_misc2;
+	u8 cdu_usage;
+#endif
+	u32 agg_misc4;
+#if defined(__BIG_ENDIAN)
+	u8 agg_val3_th;
+	u8 agg_val3;
+	u16 agg_misc3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_misc3;
+	u8 agg_val3;
+	u8 agg_val3_th;
+#endif
+	u32 expired_task_id;
+	u32 agg_misc4_th;
+#if defined(__BIG_ENDIAN)
+	u16 cq_prod;
+	u16 cq_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 cq_cons;
+	u16 cq_prod;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __reserved2;
+	u8 decision_rules;
+#define USTORM_FCOE_AG_CONTEXT_CQ_DEC_RULE (0x7<<0)
+#define USTORM_FCOE_AG_CONTEXT_CQ_DEC_RULE_SHIFT 0
+#define __USTORM_FCOE_AG_CONTEXT_AGG_VAL3_RULE (0x7<<3)
+#define __USTORM_FCOE_AG_CONTEXT_AGG_VAL3_RULE_SHIFT 3
+#define USTORM_FCOE_AG_CONTEXT_CQ_ARM_N_FLAG (0x1<<6)
+#define USTORM_FCOE_AG_CONTEXT_CQ_ARM_N_FLAG_SHIFT 6
+#define __USTORM_FCOE_AG_CONTEXT_RESERVED1 (0x1<<7)
+#define __USTORM_FCOE_AG_CONTEXT_RESERVED1_SHIFT 7
+	u8 decision_rule_enable_bits;
+#define __USTORM_FCOE_AG_CONTEXT_RESERVED_INV_CF_EN (0x1<<0)
+#define __USTORM_FCOE_AG_CONTEXT_RESERVED_INV_CF_EN_SHIFT 0
+#define USTORM_FCOE_AG_CONTEXT_COMPLETION_CF_EN (0x1<<1)
+#define USTORM_FCOE_AG_CONTEXT_COMPLETION_CF_EN_SHIFT 1
+#define USTORM_FCOE_AG_CONTEXT_TX_CF_EN (0x1<<2)
+#define USTORM_FCOE_AG_CONTEXT_TX_CF_EN_SHIFT 2
+#define __USTORM_FCOE_AG_CONTEXT_TIMER_CF_EN (0x1<<3)
+#define __USTORM_FCOE_AG_CONTEXT_TIMER_CF_EN_SHIFT 3
+#define __USTORM_FCOE_AG_CONTEXT_AUX1_CF_EN (0x1<<4)
+#define __USTORM_FCOE_AG_CONTEXT_AUX1_CF_EN_SHIFT 4
+#define __USTORM_FCOE_AG_CONTEXT_QUEUE0_CF_EN (0x1<<5)
+#define __USTORM_FCOE_AG_CONTEXT_QUEUE0_CF_EN_SHIFT 5
+#define __USTORM_FCOE_AG_CONTEXT_AUX3_CF_EN (0x1<<6)
+#define __USTORM_FCOE_AG_CONTEXT_AUX3_CF_EN_SHIFT 6
+#define __USTORM_FCOE_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __USTORM_FCOE_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+#elif defined(__LITTLE_ENDIAN)
+	u8 decision_rule_enable_bits;
+#define __USTORM_FCOE_AG_CONTEXT_RESERVED_INV_CF_EN (0x1<<0)
+#define __USTORM_FCOE_AG_CONTEXT_RESERVED_INV_CF_EN_SHIFT 0
+#define USTORM_FCOE_AG_CONTEXT_COMPLETION_CF_EN (0x1<<1)
+#define USTORM_FCOE_AG_CONTEXT_COMPLETION_CF_EN_SHIFT 1
+#define USTORM_FCOE_AG_CONTEXT_TX_CF_EN (0x1<<2)
+#define USTORM_FCOE_AG_CONTEXT_TX_CF_EN_SHIFT 2
+#define __USTORM_FCOE_AG_CONTEXT_TIMER_CF_EN (0x1<<3)
+#define __USTORM_FCOE_AG_CONTEXT_TIMER_CF_EN_SHIFT 3
+#define __USTORM_FCOE_AG_CONTEXT_AUX1_CF_EN (0x1<<4)
+#define __USTORM_FCOE_AG_CONTEXT_AUX1_CF_EN_SHIFT 4
+#define __USTORM_FCOE_AG_CONTEXT_QUEUE0_CF_EN (0x1<<5)
+#define __USTORM_FCOE_AG_CONTEXT_QUEUE0_CF_EN_SHIFT 5
+#define __USTORM_FCOE_AG_CONTEXT_AUX3_CF_EN (0x1<<6)
+#define __USTORM_FCOE_AG_CONTEXT_AUX3_CF_EN_SHIFT 6
+#define __USTORM_FCOE_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __USTORM_FCOE_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+	u8 decision_rules;
+#define USTORM_FCOE_AG_CONTEXT_CQ_DEC_RULE (0x7<<0)
+#define USTORM_FCOE_AG_CONTEXT_CQ_DEC_RULE_SHIFT 0
+#define __USTORM_FCOE_AG_CONTEXT_AGG_VAL3_RULE (0x7<<3)
+#define __USTORM_FCOE_AG_CONTEXT_AGG_VAL3_RULE_SHIFT 3
+#define USTORM_FCOE_AG_CONTEXT_CQ_ARM_N_FLAG (0x1<<6)
+#define USTORM_FCOE_AG_CONTEXT_CQ_ARM_N_FLAG_SHIFT 6
+#define __USTORM_FCOE_AG_CONTEXT_RESERVED1 (0x1<<7)
+#define __USTORM_FCOE_AG_CONTEXT_RESERVED1_SHIFT 7
+	u16 __reserved2;
+#endif
+};
+
+/*
+ * Ethernet context section
+ */
+struct xstorm_fcoe_eth_context_section {
+#if defined(__BIG_ENDIAN)
+	u8 remote_addr_4;
+	u8 remote_addr_5;
+	u8 local_addr_0;
+	u8 local_addr_1;
+#elif defined(__LITTLE_ENDIAN)
+	u8 local_addr_1;
+	u8 local_addr_0;
+	u8 remote_addr_5;
+	u8 remote_addr_4;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 remote_addr_0;
+	u8 remote_addr_1;
+	u8 remote_addr_2;
+	u8 remote_addr_3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 remote_addr_3;
+	u8 remote_addr_2;
+	u8 remote_addr_1;
+	u8 remote_addr_0;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved_vlan_type;
+	u16 params;
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_VLAN_ID (0xFFF<<0)
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_VLAN_ID_SHIFT 0
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_CFI (0x1<<12)
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_CFI_SHIFT 12
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_PRIORITY (0x7<<13)
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_PRIORITY_SHIFT 13
+#elif defined(__LITTLE_ENDIAN)
+	u16 params;
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_VLAN_ID (0xFFF<<0)
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_VLAN_ID_SHIFT 0
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_CFI (0x1<<12)
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_CFI_SHIFT 12
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_PRIORITY (0x7<<13)
+#define XSTORM_FCOE_ETH_CONTEXT_SECTION_PRIORITY_SHIFT 13
+	u16 reserved_vlan_type;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 local_addr_2;
+	u8 local_addr_3;
+	u8 local_addr_4;
+	u8 local_addr_5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 local_addr_5;
+	u8 local_addr_4;
+	u8 local_addr_3;
+	u8 local_addr_2;
+#endif
+};
+
+/*
+ * Flags used in FCoE context section - 1 byte
+ */
+struct xstorm_fcoe_context_flags {
+	u8 flags;
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_PROC_Q (0x3<<0)
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_PROC_Q_SHIFT 0
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_MID_SEQ (0x1<<2)
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_MID_SEQ_SHIFT 2
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_EXCHANGE_CLEANUP_DEFFERED (0x1<<3)
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_EXCHANGE_CLEANUP_DEFFERED_SHIFT 3
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_REC_SUPPORT (0x1<<4)
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_REC_SUPPORT_SHIFT 4
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_SQ_TOGGLE (0x1<<5)
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_SQ_TOGGLE_SHIFT 5
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_XFRQ_TOGGLE (0x1<<6)
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_XFRQ_TOGGLE_SHIFT 6
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_ABTS_DEFFERED (0x1<<7)
+#define XSTORM_FCOE_CONTEXT_FLAGS_B_ABTS_DEFFERED_SHIFT 7
+};
+
+/*
+ * FCoE SQ element
+ */
+struct fcoe_sqe {
+	u16 wqe;
+#define FCOE_SQE_TASK_ID (0x7FFF<<0)
+#define FCOE_SQE_TASK_ID_SHIFT 0
+#define FCOE_SQE_TOGGLE_BIT (0x1<<15)
+#define FCOE_SQE_TOGGLE_BIT_SHIFT 15
+};
+
+/*
+ * FCoE XFRQ element
+ */
+struct fcoe_xfrqe {
+	u16 wqe;
+#define FCOE_XFRQE_TASK_ID (0x7FFF<<0)
+#define FCOE_XFRQE_TASK_ID_SHIFT 0
+#define FCOE_XFRQE_TOGGLE_BIT (0x1<<15)
+#define FCOE_XFRQE_TOGGLE_BIT_SHIFT 15
+};
+
+/*
+ * FCoE SQ\XFRQ element
+ */
+struct fcoe_cached_wqe {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_xfrqe xfrqe;
+	struct fcoe_sqe sqe;
+#elif defined(__LITTLE_ENDIAN)
+	struct fcoe_sqe sqe;
+	struct fcoe_xfrqe xfrqe;
+#endif
+};
+
+struct fcoe_task_ctx_entry_tx_only {
+	union fcoe_sgl_ctx sgl_ctx;
+};
+
+struct xstorm_fcoe_task_ctx_entry_rd {
+	struct fcoe_task_ctx_entry_tx_only tx_wr;
+	struct fcoe_task_ctx_entry_txwr_rxrd tx_wr_rx_rd;
+	struct fcoe_task_ctx_entry_tx_rx_cmn cmn;
+	struct fcoe_task_ctx_entry_rxwr_txrd rx_wr_tx_rd;
+};
+
+/*
+ * Cached SGEs
+ */
+struct common_fcoe_sgl {
+	struct fcoe_bd_ctx sge[2];
+};
+
+/*
+ * FCP_DATA parameters required for transmission
+ */
+struct xstorm_fcoe_fcp_data {
+	u32 io_rem;
+#if defined(__BIG_ENDIAN)
+	u16 cached_sge_off;
+	u8 cached_num_sges;
+	u8 cached_sge_idx;
+#elif defined(__LITTLE_ENDIAN)
+	u8 cached_sge_idx;
+	u8 cached_num_sges;
+	u16 cached_sge_off;
+#endif
+	struct common_fcoe_sgl cached_sgl;
+};
+
+/*
+ * FCoE context section
+ */
+struct xstorm_fcoe_context_section {
+#if defined(__BIG_ENDIAN)
+	u8 vlan_flag;
+	u8 s_id[3];
+#elif defined(__LITTLE_ENDIAN)
+	u8 s_id[3];
+	u8 vlan_flag;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 func_id;
+	u8 d_id[3];
+#elif defined(__LITTLE_ENDIAN)
+	u8 d_id[3];
+	u8 func_id;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 sq_xfrq_lcq_confq_size;
+	u16 tx_max_fc_pay_len;
+#elif defined(__LITTLE_ENDIAN)
+	u16 tx_max_fc_pay_len;
+	u16 sq_xfrq_lcq_confq_size;
+#endif
+	u32 lcq_prod;
+#if defined(__BIG_ENDIAN)
+	u8 port_id;
+	u8 tx_max_conc_seqs_c3;
+	u8 seq_id;
+	struct xstorm_fcoe_context_flags tx_flags;
+#elif defined(__LITTLE_ENDIAN)
+	struct xstorm_fcoe_context_flags tx_flags;
+	u8 seq_id;
+	u8 tx_max_conc_seqs_c3;
+	u8 port_id;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 verify_tx_seq;
+	u8 func_mode;
+	u8 vnic_id;
+#elif defined(__LITTLE_ENDIAN)
+	u8 vnic_id;
+	u8 func_mode;
+	u16 verify_tx_seq;
+#endif
+	struct regpair confq_curr_page_addr;
+	struct fcoe_cached_wqe cached_wqe[8];
+	struct regpair lcq_base_addr;
+	struct xstorm_fcoe_task_ctx_entry_rd tce;
+	struct xstorm_fcoe_fcp_data fcp_data;
+#if defined(__BIG_ENDIAN)
+	u16 fcoe_tx_stat_params_ram_addr;
+	u16 cmng_port_ram_addr;
+#elif defined(__LITTLE_ENDIAN)
+	u16 cmng_port_ram_addr;
+	u16 fcoe_tx_stat_params_ram_addr;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 fcp_cmd_pb_cmd_size;
+	u8 eth_hdr_size;
+	u16 pbf_addr;
+#elif defined(__LITTLE_ENDIAN)
+	u16 pbf_addr;
+	u8 eth_hdr_size;
+	u8 fcp_cmd_pb_cmd_size;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 reserved2[2];
+	u8 cos;
+	u8 dcb_version;
+#elif defined(__LITTLE_ENDIAN)
+	u8 dcb_version;
+	u8 cos;
+	u8 reserved2[2];
+#endif
+	u32 reserved3;
+	struct regpair reserved4[2];
+};
+
+/*
+ * Xstorm FCoE Storm Context
+ */
+struct xstorm_fcoe_st_context {
+	struct xstorm_fcoe_eth_context_section eth;
+	struct xstorm_fcoe_context_section fcoe;
+};
+
+/*
+ * Fcoe connection context
+ */
+struct fcoe_context {
+	struct ustorm_fcoe_st_context ustorm_st_context;
+	struct tstorm_fcoe_st_context tstorm_st_context;
+	struct xstorm_fcoe_ag_context xstorm_ag_context;
+	struct tstorm_fcoe_ag_context tstorm_ag_context;
+	struct ustorm_fcoe_ag_context ustorm_ag_context;
+	struct timers_block_context timers_context;
+	struct xstorm_fcoe_st_context xstorm_st_context;
+};
+
+/*
  * iSCSI context region, used only in iSCSI
  */
 struct ustorm_iscsi_rq_db {
@@ -2268,6 +3792,577 @@ struct iscsi_context {
 };
 
 /*
+ * FCoE KCQ CQE parameters
+ */
+union fcoe_kcqe_params {
+	u32 reserved0[4];
+};
+
+/*
+ * FCoE KCQ CQE
+ */
+struct fcoe_kcqe {
+	u32 fcoe_conn_id;
+	u32 completion_status;
+	u32 fcoe_conn_context_id;
+	union fcoe_kcqe_params params;
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define FCOE_KCQE_RESERVED0 (0x7<<0)
+#define FCOE_KCQE_RESERVED0_SHIFT 0
+#define FCOE_KCQE_RAMROD_COMPLETION (0x1<<3)
+#define FCOE_KCQE_RAMROD_COMPLETION_SHIFT 3
+#define FCOE_KCQE_LAYER_CODE (0x7<<4)
+#define FCOE_KCQE_LAYER_CODE_SHIFT 4
+#define FCOE_KCQE_LINKED_WITH_NEXT (0x1<<7)
+#define FCOE_KCQE_LINKED_WITH_NEXT_SHIFT 7
+	u8 op_code;
+	u16 qe_self_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 qe_self_seq;
+	u8 op_code;
+	u8 flags;
+#define FCOE_KCQE_RESERVED0 (0x7<<0)
+#define FCOE_KCQE_RESERVED0_SHIFT 0
+#define FCOE_KCQE_RAMROD_COMPLETION (0x1<<3)
+#define FCOE_KCQE_RAMROD_COMPLETION_SHIFT 3
+#define FCOE_KCQE_LAYER_CODE (0x7<<4)
+#define FCOE_KCQE_LAYER_CODE_SHIFT 4
+#define FCOE_KCQE_LINKED_WITH_NEXT (0x1<<7)
+#define FCOE_KCQE_LINKED_WITH_NEXT_SHIFT 7
+#endif
+};
+
+/*
+ * FCoE KWQE header
+ */
+struct fcoe_kwqe_header {
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define FCOE_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define FCOE_KWQE_HEADER_RESERVED0_SHIFT 0
+#define FCOE_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define FCOE_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define FCOE_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define FCOE_KWQE_HEADER_RESERVED1_SHIFT 7
+	u8 op_code;
+#elif defined(__LITTLE_ENDIAN)
+	u8 op_code;
+	u8 flags;
+#define FCOE_KWQE_HEADER_RESERVED0 (0xF<<0)
+#define FCOE_KWQE_HEADER_RESERVED0_SHIFT 0
+#define FCOE_KWQE_HEADER_LAYER_CODE (0x7<<4)
+#define FCOE_KWQE_HEADER_LAYER_CODE_SHIFT 4
+#define FCOE_KWQE_HEADER_RESERVED1 (0x1<<7)
+#define FCOE_KWQE_HEADER_RESERVED1_SHIFT 7
+#endif
+};
+
+/*
+ * FCoE firmware init request 1
+ */
+struct fcoe_kwqe_init1 {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u16 num_tasks;
+#elif defined(__LITTLE_ENDIAN)
+	u16 num_tasks;
+	struct fcoe_kwqe_header hdr;
+#endif
+	u32 task_list_pbl_addr_lo;
+	u32 task_list_pbl_addr_hi;
+	u32 dummy_buffer_addr_lo;
+	u32 dummy_buffer_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u16 rq_num_wqes;
+	u16 sq_num_wqes;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_num_wqes;
+	u16 rq_num_wqes;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 cq_num_wqes;
+	u16 rq_buffer_log_size;
+#elif defined(__LITTLE_ENDIAN)
+	u16 rq_buffer_log_size;
+	u16 cq_num_wqes;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define FCOE_KWQE_INIT1_LOG_PAGE_SIZE (0xF<<0)
+#define FCOE_KWQE_INIT1_LOG_PAGE_SIZE_SHIFT 0
+#define FCOE_KWQE_INIT1_LOG_CACHED_PBES_PER_FUNC (0x7<<4)
+#define FCOE_KWQE_INIT1_LOG_CACHED_PBES_PER_FUNC_SHIFT 4
+#define FCOE_KWQE_INIT1_RESERVED1 (0x1<<7)
+#define FCOE_KWQE_INIT1_RESERVED1_SHIFT 7
+	u8 num_sessions_log;
+	u16 mtu;
+#elif defined(__LITTLE_ENDIAN)
+	u16 mtu;
+	u8 num_sessions_log;
+	u8 flags;
+#define FCOE_KWQE_INIT1_LOG_PAGE_SIZE (0xF<<0)
+#define FCOE_KWQE_INIT1_LOG_PAGE_SIZE_SHIFT 0
+#define FCOE_KWQE_INIT1_LOG_CACHED_PBES_PER_FUNC (0x7<<4)
+#define FCOE_KWQE_INIT1_LOG_CACHED_PBES_PER_FUNC_SHIFT 4
+#define FCOE_KWQE_INIT1_RESERVED1 (0x1<<7)
+#define FCOE_KWQE_INIT1_RESERVED1_SHIFT 7
+#endif
+};
+
+/*
+ * FCoE firmware init request 2
+ */
+struct fcoe_kwqe_init2 {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct fcoe_kwqe_header hdr;
+#endif
+	u32 hash_tbl_pbl_addr_lo;
+	u32 hash_tbl_pbl_addr_hi;
+	u32 t2_hash_tbl_addr_lo;
+	u32 t2_hash_tbl_addr_hi;
+	u32 t2_ptr_hash_tbl_addr_lo;
+	u32 t2_ptr_hash_tbl_addr_hi;
+	u32 free_list_count;
+};
+
+/*
+ * FCoE firmware init request 3
+ */
+struct fcoe_kwqe_init3 {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct fcoe_kwqe_header hdr;
+#endif
+	u32 error_bit_map_lo;
+	u32 error_bit_map_hi;
+#if defined(__BIG_ENDIAN)
+	u8 reserved21[3];
+	u8 cached_session_enable;
+#elif defined(__LITTLE_ENDIAN)
+	u8 cached_session_enable;
+	u8 reserved21[3];
+#endif
+	u32 reserved2[4];
+};
+
+/*
+ * FCoE connection offload request 1
+ */
+struct fcoe_kwqe_conn_offload1 {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u16 fcoe_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 fcoe_conn_id;
+	struct fcoe_kwqe_header hdr;
+#endif
+	u32 sq_addr_lo;
+	u32 sq_addr_hi;
+	u32 rq_pbl_addr_lo;
+	u32 rq_pbl_addr_hi;
+	u32 rq_first_pbe_addr_lo;
+	u32 rq_first_pbe_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u16 reserved0;
+	u16 rq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 rq_prod;
+	u16 reserved0;
+#endif
+};
+
+/*
+ * FCoE connection offload request 2
+ */
+struct fcoe_kwqe_conn_offload2 {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u16 tx_max_fc_pay_len;
+#elif defined(__LITTLE_ENDIAN)
+	u16 tx_max_fc_pay_len;
+	struct fcoe_kwqe_header hdr;
+#endif
+	u32 cq_addr_lo;
+	u32 cq_addr_hi;
+	u32 xferq_addr_lo;
+	u32 xferq_addr_hi;
+	u32 conn_db_addr_lo;
+	u32 conn_db_addr_hi;
+	u32 reserved1;
+};
+
+/*
+ * FCoE connection offload request 3
+ */
+struct fcoe_kwqe_conn_offload3 {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u16 vlan_tag;
+#define FCOE_KWQE_CONN_OFFLOAD3_VLAN_ID (0xFFF<<0)
+#define FCOE_KWQE_CONN_OFFLOAD3_VLAN_ID_SHIFT 0
+#define FCOE_KWQE_CONN_OFFLOAD3_CFI (0x1<<12)
+#define FCOE_KWQE_CONN_OFFLOAD3_CFI_SHIFT 12
+#define FCOE_KWQE_CONN_OFFLOAD3_PRIORITY (0x7<<13)
+#define FCOE_KWQE_CONN_OFFLOAD3_PRIORITY_SHIFT 13
+#elif defined(__LITTLE_ENDIAN)
+	u16 vlan_tag;
+#define FCOE_KWQE_CONN_OFFLOAD3_VLAN_ID (0xFFF<<0)
+#define FCOE_KWQE_CONN_OFFLOAD3_VLAN_ID_SHIFT 0
+#define FCOE_KWQE_CONN_OFFLOAD3_CFI (0x1<<12)
+#define FCOE_KWQE_CONN_OFFLOAD3_CFI_SHIFT 12
+#define FCOE_KWQE_CONN_OFFLOAD3_PRIORITY (0x7<<13)
+#define FCOE_KWQE_CONN_OFFLOAD3_PRIORITY_SHIFT 13
+	struct fcoe_kwqe_header hdr;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 tx_max_conc_seqs_c3;
+	u8 s_id[3];
+#elif defined(__LITTLE_ENDIAN)
+	u8 s_id[3];
+	u8 tx_max_conc_seqs_c3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 flags;
+#define FCOE_KWQE_CONN_OFFLOAD3_B_MUL_N_PORT_IDS (0x1<<0)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_MUL_N_PORT_IDS_SHIFT 0
+#define FCOE_KWQE_CONN_OFFLOAD3_B_E_D_TOV_RES (0x1<<1)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_E_D_TOV_RES_SHIFT 1
+#define FCOE_KWQE_CONN_OFFLOAD3_B_CONT_INCR_SEQ_CNT (0x1<<2)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_CONT_INCR_SEQ_CNT_SHIFT 2
+#define FCOE_KWQE_CONN_OFFLOAD3_B_CONF_REQ (0x1<<3)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_CONF_REQ_SHIFT 3
+#define FCOE_KWQE_CONN_OFFLOAD3_B_REC_VALID (0x1<<4)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_REC_VALID_SHIFT 4
+#define FCOE_KWQE_CONN_OFFLOAD3_B_C2_VALID (0x1<<5)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_C2_VALID_SHIFT 5
+#define FCOE_KWQE_CONN_OFFLOAD3_B_ACK_0 (0x1<<6)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_ACK_0_SHIFT 6
+#define FCOE_KWQE_CONN_OFFLOAD3_B_VLAN_FLAG (0x1<<7)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_VLAN_FLAG_SHIFT 7
+	u8 d_id[3];
+#elif defined(__LITTLE_ENDIAN)
+	u8 d_id[3];
+	u8 flags;
+#define FCOE_KWQE_CONN_OFFLOAD3_B_MUL_N_PORT_IDS (0x1<<0)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_MUL_N_PORT_IDS_SHIFT 0
+#define FCOE_KWQE_CONN_OFFLOAD3_B_E_D_TOV_RES (0x1<<1)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_E_D_TOV_RES_SHIFT 1
+#define FCOE_KWQE_CONN_OFFLOAD3_B_CONT_INCR_SEQ_CNT (0x1<<2)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_CONT_INCR_SEQ_CNT_SHIFT 2
+#define FCOE_KWQE_CONN_OFFLOAD3_B_CONF_REQ (0x1<<3)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_CONF_REQ_SHIFT 3
+#define FCOE_KWQE_CONN_OFFLOAD3_B_REC_VALID (0x1<<4)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_REC_VALID_SHIFT 4
+#define FCOE_KWQE_CONN_OFFLOAD3_B_C2_VALID (0x1<<5)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_C2_VALID_SHIFT 5
+#define FCOE_KWQE_CONN_OFFLOAD3_B_ACK_0 (0x1<<6)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_ACK_0_SHIFT 6
+#define FCOE_KWQE_CONN_OFFLOAD3_B_VLAN_FLAG (0x1<<7)
+#define FCOE_KWQE_CONN_OFFLOAD3_B_VLAN_FLAG_SHIFT 7
+#endif
+	u32 reserved;
+	u32 confq_first_pbe_addr_lo;
+	u32 confq_first_pbe_addr_hi;
+#if defined(__BIG_ENDIAN)
+	u16 rx_max_fc_pay_len;
+	u16 tx_total_conc_seqs;
+#elif defined(__LITTLE_ENDIAN)
+	u16 tx_total_conc_seqs;
+	u16 rx_max_fc_pay_len;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 rx_open_seqs_exch_c3;
+	u8 rx_max_conc_seqs_c3;
+	u16 rx_total_conc_seqs;
+#elif defined(__LITTLE_ENDIAN)
+	u16 rx_total_conc_seqs;
+	u8 rx_max_conc_seqs_c3;
+	u8 rx_open_seqs_exch_c3;
+#endif
+};
+
+/*
+ * FCoE connection offload request 4
+ */
+struct fcoe_kwqe_conn_offload4 {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u8 reserved2;
+	u8 e_d_tov_timer_val;
+#elif defined(__LITTLE_ENDIAN)
+	u8 e_d_tov_timer_val;
+	u8 reserved2;
+	struct fcoe_kwqe_header hdr;
+#endif
+	u8 src_mac_addr_lo32[4];
+#if defined(__BIG_ENDIAN)
+	u8 dst_mac_addr_hi16[2];
+	u8 src_mac_addr_hi16[2];
+#elif defined(__LITTLE_ENDIAN)
+	u8 src_mac_addr_hi16[2];
+	u8 dst_mac_addr_hi16[2];
+#endif
+	u8 dst_mac_addr_lo32[4];
+	u32 lcq_addr_lo;
+	u32 lcq_addr_hi;
+	u32 confq_pbl_base_addr_lo;
+	u32 confq_pbl_base_addr_hi;
+};
+
+/*
+ * FCoE connection enable request
+ */
+struct fcoe_kwqe_conn_enable_disable {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct fcoe_kwqe_header hdr;
+#endif
+	u8 src_mac_addr_lo32[4];
+#if defined(__BIG_ENDIAN)
+	u16 vlan_tag;
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_VLAN_ID (0xFFF<<0)
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_VLAN_ID_SHIFT 0
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_CFI (0x1<<12)
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_CFI_SHIFT 12
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_PRIORITY (0x7<<13)
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_PRIORITY_SHIFT 13
+	u8 src_mac_addr_hi16[2];
+#elif defined(__LITTLE_ENDIAN)
+	u8 src_mac_addr_hi16[2];
+	u16 vlan_tag;
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_VLAN_ID (0xFFF<<0)
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_VLAN_ID_SHIFT 0
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_CFI (0x1<<12)
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_CFI_SHIFT 12
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_PRIORITY (0x7<<13)
+#define FCOE_KWQE_CONN_ENABLE_DISABLE_PRIORITY_SHIFT 13
+#endif
+	u8 dst_mac_addr_lo32[4];
+#if defined(__BIG_ENDIAN)
+	u16 reserved1;
+	u8 dst_mac_addr_hi16[2];
+#elif defined(__LITTLE_ENDIAN)
+	u8 dst_mac_addr_hi16[2];
+	u16 reserved1;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 vlan_flag;
+	u8 s_id[3];
+#elif defined(__LITTLE_ENDIAN)
+	u8 s_id[3];
+	u8 vlan_flag;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 reserved3;
+	u8 d_id[3];
+#elif defined(__LITTLE_ENDIAN)
+	u8 d_id[3];
+	u8 reserved3;
+#endif
+	u32 context_id;
+	u32 conn_id;
+	u32 reserved4;
+};
+
+/*
+ * FCoE connection destroy request
+ */
+struct fcoe_kwqe_conn_destroy {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct fcoe_kwqe_header hdr;
+#endif
+	u32 context_id;
+	u32 conn_id;
+	u32 reserved1[5];
+};
+
+/*
+ * FCoe destroy request
+ */
+struct fcoe_kwqe_destroy {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct fcoe_kwqe_header hdr;
+#endif
+	u32 reserved1[7];
+};
+
+/*
+ * FCoe statistics request
+ */
+struct fcoe_kwqe_stat {
+#if defined(__BIG_ENDIAN)
+	struct fcoe_kwqe_header hdr;
+	u16 reserved0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved0;
+	struct fcoe_kwqe_header hdr;
+#endif
+	u32 stat_params_addr_lo;
+	u32 stat_params_addr_hi;
+	u32 reserved1[5];
+};
+
+/*
+ * FCoE KWQ WQE
+ */
+union fcoe_kwqe {
+	struct fcoe_kwqe_init1 init1;
+	struct fcoe_kwqe_init2 init2;
+	struct fcoe_kwqe_init3 init3;
+	struct fcoe_kwqe_conn_offload1 conn_offload1;
+	struct fcoe_kwqe_conn_offload2 conn_offload2;
+	struct fcoe_kwqe_conn_offload3 conn_offload3;
+	struct fcoe_kwqe_conn_offload4 conn_offload4;
+	struct fcoe_kwqe_conn_enable_disable conn_enable_disable;
+	struct fcoe_kwqe_conn_destroy conn_destroy;
+	struct fcoe_kwqe_destroy destroy;
+	struct fcoe_kwqe_stat statistics;
+};
+
+struct fcoe_task_ctx_entry {
+	struct fcoe_task_ctx_entry_tx_only tx_wr_only;
+	struct fcoe_task_ctx_entry_txwr_rxrd tx_wr_rx_rd;
+	struct fcoe_task_ctx_entry_tx_rx_cmn cmn;
+	struct fcoe_task_ctx_entry_rxwr_txrd rx_wr_tx_rd;
+	struct fcoe_task_ctx_entry_rx_only rx_wr_only;
+	u32 reserved[4];
+};
+
+/*
+ * FCoE connection enable\disable params passed by driver to FW in FCoE enable ramrod
+ */
+struct fcoe_conn_enable_disable_ramrod_params {
+	struct fcoe_kwqe_conn_enable_disable enable_disable_kwqe;
+};
+
+
+/*
+ * FCoE connection offload params passed by driver to FW in FCoE offload ramrod
+ */
+struct fcoe_conn_offload_ramrod_params {
+	struct fcoe_kwqe_conn_offload1 offload_kwqe1;
+	struct fcoe_kwqe_conn_offload2 offload_kwqe2;
+	struct fcoe_kwqe_conn_offload3 offload_kwqe3;
+	struct fcoe_kwqe_conn_offload4 offload_kwqe4;
+};
+
+/*
+ * FCoE init params passed by driver to FW in FCoE init ramrod
+ */
+struct fcoe_init_ramrod_params {
+	struct fcoe_kwqe_init1 init_kwqe1;
+	struct fcoe_kwqe_init2 init_kwqe2;
+	struct fcoe_kwqe_init3 init_kwqe3;
+	struct regpair eq_addr;
+	struct regpair eq_next_page_addr;
+#if defined(__BIG_ENDIAN)
+	u16 sb_num;
+	u16 eq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 eq_prod;
+	u16 sb_num;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved1;
+	u8 reserved0;
+	u8 sb_id;
+#elif defined(__LITTLE_ENDIAN)
+	u8 sb_id;
+	u8 reserved0;
+	u16 reserved1;
+#endif
+};
+
+
+/*
+ * FCoE statistics params buffer passed by driver to FW in FCoE statistics ramrod
+ */
+struct fcoe_stat_ramrod_params {
+	struct fcoe_kwqe_stat stat_kwqe;
+};
+
+
+/*
+ * FCoE 16-bits vlan structure
+ */
+struct fcoe_vlan_fields {
+	u16 fields;
+#define FCOE_VLAN_FIELDS_VID (0xFFF<<0)
+#define FCOE_VLAN_FIELDS_VID_SHIFT 0
+#define FCOE_VLAN_FIELDS_CLI (0x1<<12)
+#define FCOE_VLAN_FIELDS_CLI_SHIFT 12
+#define FCOE_VLAN_FIELDS_PRI (0x7<<13)
+#define FCOE_VLAN_FIELDS_PRI_SHIFT 13
+};
+
+
+/*
+ * FCoE 16-bits vlan union
+ */
+union fcoe_vlan_field_union {
+	struct fcoe_vlan_fields fields;
+	u16 val;
+};
+
+/*
+ * Parameters used for Class 2 verifications
+ */
+struct ustorm_fcoe_c2_params {
+#if defined(__BIG_ENDIAN)
+	u16 e2e_credit;
+	u16 con_seq;
+#elif defined(__LITTLE_ENDIAN)
+	u16 con_seq;
+	u16 e2e_credit;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 ackq_prod;
+	u16 open_seq_per_exch;
+#elif defined(__LITTLE_ENDIAN)
+	u16 open_seq_per_exch;
+	u16 ackq_prod;
+#endif
+	struct regpair ackq_pbl_base;
+	struct regpair ackq_cur_seg;
+};
+
+/*
+ * Parameters used for Class 2 verifications
+ */
+struct xstorm_fcoe_c2_params {
+#if defined(__BIG_ENDIAN)
+	u16 reserved0;
+	u8 ackq_x_prod;
+	u8 max_conc_seqs_c2;
+#elif defined(__LITTLE_ENDIAN)
+	u8 max_conc_seqs_c2;
+	u8 ackq_x_prod;
+	u16 reserved0;
+#endif
+	struct regpair ackq_pbl_base;
+	struct regpair ackq_cur_seg;
+};
+
+/*
  * Buffer per connection, used in Tstorm
  */
 struct iscsi_conn_buf {
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index 0dbeaec4f03..9f44e0ffe00 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -1,6 +1,6 @@
 /* cnic_if.h: Broadcom CNIC core network driver.
  *
- * Copyright (c) 2006-2010 Broadcom Corporation
+ * Copyright (c) 2006-2011 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -12,22 +12,31 @@
 #ifndef CNIC_IF_H
 #define CNIC_IF_H
 
-#define CNIC_MODULE_VERSION	"2.2.6"
-#define CNIC_MODULE_RELDATE	"Oct 12, 2010"
+#define CNIC_MODULE_VERSION	"2.2.12"
+#define CNIC_MODULE_RELDATE	"Jan 03, 2011"
 
 #define CNIC_ULP_RDMA		0
 #define CNIC_ULP_ISCSI		1
-#define CNIC_ULP_L4		2
-#define MAX_CNIC_ULP_TYPE_EXT	2
-#define MAX_CNIC_ULP_TYPE	3
+#define CNIC_ULP_FCOE		2
+#define CNIC_ULP_L4		3
+#define MAX_CNIC_ULP_TYPE_EXT	3
+#define MAX_CNIC_ULP_TYPE	4
 
 struct kwqe {
 	u32 kwqe_op_flag;
 
+#define KWQE_QID_SHIFT		8
 #define KWQE_OPCODE_MASK	0x00ff0000
 #define KWQE_OPCODE_SHIFT	16
-#define KWQE_FLAGS_LAYER_SHIFT	28
 #define KWQE_OPCODE(x)		((x & KWQE_OPCODE_MASK) >> KWQE_OPCODE_SHIFT)
+#define KWQE_LAYER_MASK			0x70000000
+#define KWQE_LAYER_SHIFT		28
+#define KWQE_FLAGS_LAYER_MASK_L2	(2<<28)
+#define KWQE_FLAGS_LAYER_MASK_L3	(3<<28)
+#define KWQE_FLAGS_LAYER_MASK_L4	(4<<28)
+#define KWQE_FLAGS_LAYER_MASK_L5_RDMA	(5<<28)
+#define KWQE_FLAGS_LAYER_MASK_L5_ISCSI	(6<<28)
+#define KWQE_FLAGS_LAYER_MASK_L5_FCOE	(7<<28)
 
 	u32 kwqe_info0;
 	u32 kwqe_info1;
@@ -62,6 +71,7 @@ struct kcqe {
 		#define KCQE_FLAGS_LAYER_MASK_L4	(4<<28)
 		#define KCQE_FLAGS_LAYER_MASK_L5_RDMA	(5<<28)
 		#define KCQE_FLAGS_LAYER_MASK_L5_ISCSI	(6<<28)
+		#define KCQE_FLAGS_LAYER_MASK_L5_FCOE	(7<<28)
 		#define KCQE_FLAGS_NEXT 		(1<<31)
 		#define KCQE_FLAGS_OPCODE_MASK		(0xff<<16)
 		#define KCQE_FLAGS_OPCODE_SHIFT		(16)
@@ -301,7 +311,7 @@ struct cnic_ulp_ops {
 	void (*cm_abort_complete)(struct cnic_sock *);
 	void (*cm_remote_close)(struct cnic_sock *);
 	void (*cm_remote_abort)(struct cnic_sock *);
-	void (*iscsi_nl_send_msg)(struct cnic_dev *dev, u32 msg_type,
+	int (*iscsi_nl_send_msg)(void *ulp_ctx, u32 msg_type,
 				  char *data, u16 data_size);
 	struct module *owner;
 	atomic_t ref_count;
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index 81475cc80e1..80c2feeefec 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -59,7 +59,6 @@ static struct sockaddr default_mac = {
 
 /* Information that need to be kept for each board. */
 struct net_local {
-	struct net_device_stats stats;
 	struct mii_if_info mii_if;
 
 	/* Tx control lock.  This protects the transmit buffer ring
@@ -1059,7 +1058,7 @@ e100_tx_timeout(struct net_device *dev)
 
 	/* remember we got an error */
 
-	np->stats.tx_errors++;
+	dev->stats.tx_errors++;
 
 	/* reset the TX DMA in case it has hung on something */
 
@@ -1157,7 +1156,7 @@ e100rxtx_interrupt(int irq, void *dev_id)
 			 * allocate a new buffer to put a packet in.
 			 */
 			e100_rx(dev);
-			np->stats.rx_packets++;
+			dev->stats.rx_packets++;
 			/* restart/continue on the channel, for safety */
 			*R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart);
 			/* clear dma channel 1 eop/descr irq bits */
@@ -1173,8 +1172,8 @@ e100rxtx_interrupt(int irq, void *dev_id)
 	/* Report any packets that have been sent */
 	while (virt_to_phys(myFirstTxDesc) != *R_DMA_CH0_FIRST &&
 	       (netif_queue_stopped(dev) || myFirstTxDesc != myNextTxDesc)) {
-		np->stats.tx_bytes += myFirstTxDesc->skb->len;
-		np->stats.tx_packets++;
+		dev->stats.tx_bytes += myFirstTxDesc->skb->len;
+		dev->stats.tx_packets++;
 
 		/* dma is ready with the transmission of the data in tx_skb, so now
 		   we can release the skb memory */
@@ -1197,7 +1196,6 @@ static irqreturn_t
 e100nw_interrupt(int irq, void *dev_id)
 {
 	struct net_device *dev = (struct net_device *)dev_id;
-	struct net_local *np = netdev_priv(dev);
 	unsigned long irqbits = *R_IRQ_MASK0_RD;
 
 	/* check for underrun irq */
@@ -1205,13 +1203,13 @@ e100nw_interrupt(int irq, void *dev_id)
 		SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
 		*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
 		SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
-		np->stats.tx_errors++;
+		dev->stats.tx_errors++;
 		D(printk("ethernet receiver underrun!\n"));
 	}
 
 	/* check for overrun irq */
 	if (irqbits & IO_STATE(R_IRQ_MASK0_RD, overrun, active)) {
-		update_rx_stats(&np->stats); /* this will ack the irq */
+		update_rx_stats(&dev->stats); /* this will ack the irq */
 		D(printk("ethernet receiver overrun!\n"));
 	}
 	/* check for excessive collision irq */
@@ -1219,7 +1217,7 @@ e100nw_interrupt(int irq, void *dev_id)
 		SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr);
 		*R_NETWORK_TR_CTRL = network_tr_ctrl_shadow;
 		SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop);
-		np->stats.tx_errors++;
+		dev->stats.tx_errors++;
 		D(printk("ethernet excessive collisions!\n"));
 	}
 	return IRQ_HANDLED;
@@ -1250,7 +1248,7 @@ e100_rx(struct net_device *dev)
 	spin_unlock(&np->led_lock);
 
 	length = myNextRxDesc->descr.hw_len - 4;
-	np->stats.rx_bytes += length;
+	dev->stats.rx_bytes += length;
 
 #ifdef ETHDEBUG
 	printk("Got a packet of length %d:\n", length);
@@ -1268,7 +1266,7 @@ e100_rx(struct net_device *dev)
 		/* Small packet, copy data */
 		skb = dev_alloc_skb(length - ETHER_HEAD_LEN);
 		if (!skb) {
-			np->stats.rx_errors++;
+			dev->stats.rx_errors++;
 			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
 			goto update_nextrxdesc;
 		}
@@ -1294,7 +1292,7 @@ e100_rx(struct net_device *dev)
 		int align;
 		struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES);
 		if (!new_skb) {
-			np->stats.rx_errors++;
+			dev->stats.rx_errors++;
 			printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
 			goto update_nextrxdesc;
 		}
@@ -1333,8 +1331,6 @@ e100_rx(struct net_device *dev)
 static int
 e100_close(struct net_device *dev)
 {
-	struct net_local *np = netdev_priv(dev);
-
 	printk(KERN_INFO "Closing %s.\n", dev->name);
 
 	netif_stop_queue(dev);
@@ -1366,8 +1362,8 @@ e100_close(struct net_device *dev)
 
 	/* Update the statistics here. */
 
-	update_rx_stats(&np->stats);
-	update_tx_stats(&np->stats);
+	update_rx_stats(&dev->stats);
+	update_tx_stats(&dev->stats);
 
 	/* Stop speed/duplex timers */
 	del_timer(&speed_timer);
@@ -1545,11 +1541,11 @@ e100_get_stats(struct net_device *dev)
 
 	spin_lock_irqsave(&lp->lock, flags);
 
-	update_rx_stats(&lp->stats);
-	update_tx_stats(&lp->stats);
+	update_rx_stats(&dev->stats);
+	update_tx_stats(&dev->stats);
 
 	spin_unlock_irqrestore(&lp->lock, flags);
-	return &lp->stats;
+	return &dev->stats;
 }
 
 /*
diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c
index 35cd3672915..2028da95afa 100644
--- a/drivers/net/cxgb3/ael1002.c
+++ b/drivers/net/cxgb3/ael1002.c
@@ -292,7 +292,7 @@ unknown:
  */
 static int ael2005_setup_sr_edc(struct cphy *phy)
 {
-	static struct reg_val regs[] = {
+	static const struct reg_val regs[] = {
 		{ MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x181 },
 		{ MDIO_MMD_PMAPMD, 0xc010, 0xffff, 0x448a },
 		{ MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5200 },
@@ -324,11 +324,11 @@ static int ael2005_setup_sr_edc(struct cphy *phy)
 
 static int ael2005_setup_twinax_edc(struct cphy *phy, int modtype)
 {
-	static struct reg_val regs[] = {
+	static const struct reg_val regs[] = {
 		{ MDIO_MMD_PMAPMD, 0xc04a, 0xffff, 0x5a00 },
 		{ 0, 0, 0, 0 }
 	};
-	static struct reg_val preemphasis[] = {
+	static const struct reg_val preemphasis[] = {
 		{ MDIO_MMD_PMAPMD, 0xc014, 0xffff, 0xfe16 },
 		{ MDIO_MMD_PMAPMD, 0xc015, 0xffff, 0xa000 },
 		{ 0, 0, 0, 0 }
@@ -393,7 +393,7 @@ static int ael2005_intr_clear(struct cphy *phy)
 
 static int ael2005_reset(struct cphy *phy, int wait)
 {
-	static struct reg_val regs0[] = {
+	static const struct reg_val regs0[] = {
 		{ MDIO_MMD_PMAPMD, 0xc001, 0, 1 << 5 },
 		{ MDIO_MMD_PMAPMD, 0xc017, 0, 1 << 5 },
 		{ MDIO_MMD_PMAPMD, 0xc013, 0xffff, 0xf341 },
@@ -403,7 +403,7 @@ static int ael2005_reset(struct cphy *phy, int wait)
 		{ MDIO_MMD_PMAPMD, 0xc210, 0xffff, 0 },
 		{ 0, 0, 0, 0 }
 	};
-	static struct reg_val regs1[] = {
+	static const struct reg_val regs1[] = {
 		{ MDIO_MMD_PMAPMD, 0xca00, 0xffff, 0x0080 },
 		{ MDIO_MMD_PMAPMD, 0xca12, 0xffff, 0 },
 		{ 0, 0, 0, 0 }
@@ -522,7 +522,7 @@ int t3_ael2005_phy_prep(struct cphy *phy, struct adapter *adapter,
  */
 static int ael2020_setup_sr_edc(struct cphy *phy)
 {
-	static struct reg_val regs[] = {
+	static const struct reg_val regs[] = {
 		/* set CDR offset to 10 */
 		{ MDIO_MMD_PMAPMD, 0xcc01, 0xffff, 0x488a },
 
@@ -551,20 +551,20 @@ static int ael2020_setup_sr_edc(struct cphy *phy)
 static int ael2020_setup_twinax_edc(struct cphy *phy, int modtype)
 {
 	/* set uC to 40MHz */
-	static struct reg_val uCclock40MHz[] = {
+	static const struct reg_val uCclock40MHz[] = {
 		{ MDIO_MMD_PMAPMD, 0xff28, 0xffff, 0x4001 },
 		{ MDIO_MMD_PMAPMD, 0xff2a, 0xffff, 0x0002 },
 		{ 0, 0, 0, 0 }
 	};
 
 	/* activate uC clock */
-	static struct reg_val uCclockActivate[] = {
+	static const struct reg_val uCclockActivate[] = {
 		{ MDIO_MMD_PMAPMD, 0xd000, 0xffff, 0x5200 },
 		{ 0, 0, 0, 0 }
 	};
 
 	/* set PC to start of SRAM and activate uC */
-	static struct reg_val uCactivate[] = {
+	static const struct reg_val uCactivate[] = {
 		{ MDIO_MMD_PMAPMD, 0xd080, 0xffff, 0x0100 },
 		{ MDIO_MMD_PMAPMD, 0xd092, 0xffff, 0x0000 },
 		{ 0, 0, 0, 0 }
@@ -624,7 +624,7 @@ static int ael2020_get_module_type(struct cphy *phy, int delay_ms)
  */
 static int ael2020_intr_enable(struct cphy *phy)
 {
-	struct reg_val regs[] = {
+	static const struct reg_val regs[] = {
 		/* output Module's Loss Of Signal (LOS) to LED */
 		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CFG+AEL2020_GPIO_LSTAT,
 			0xffff, 0x4 },
@@ -664,7 +664,7 @@ static int ael2020_intr_enable(struct cphy *phy)
  */
 static int ael2020_intr_disable(struct cphy *phy)
 {
-	struct reg_val regs[] = {
+	static const struct reg_val regs[] = {
 		/* reset "link status" LED to "off" */
 		{ MDIO_MMD_PMAPMD, AEL2020_GPIO_CTRL,
 			0xffff, 0xb << (AEL2020_GPIO_LSTAT*4) },
@@ -701,7 +701,7 @@ static int ael2020_intr_clear(struct cphy *phy)
 	return err ? err : t3_phy_lasi_intr_clear(phy);
 }
 
-static struct reg_val ael2020_reset_regs[] = {
+static const struct reg_val ael2020_reset_regs[] = {
 	/* Erratum #2: CDRLOL asserted, causing PMA link down status */
 	{ MDIO_MMD_PMAPMD, 0xc003, 0xffff, 0x3101 },
 
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 046d846c652..4d538a4e9d5 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -1359,6 +1359,7 @@ out:
 static int offload_close(struct t3cdev *tdev)
 {
 	struct adapter *adapter = tdev2adap(tdev);
+	struct t3c_data *td = T3C_DATA(tdev);
 
 	if (!test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map))
 		return 0;
@@ -1369,7 +1370,7 @@ static int offload_close(struct t3cdev *tdev)
 	sysfs_remove_group(&tdev->lldev->dev.kobj, &offload_attr_group);
 
 	/* Flush work scheduled while releasing TIDs */
-	flush_scheduled_work();
+	flush_work_sync(&td->tid_release_task);
 
 	tdev->lldev = NULL;
 	cxgb3_set_dummy_ops(tdev);
@@ -3006,12 +3007,11 @@ static pci_ers_result_t t3_io_error_detected(struct pci_dev *pdev,
 					     pci_channel_state_t state)
 {
 	struct adapter *adapter = pci_get_drvdata(pdev);
-	int ret;
 
 	if (state == pci_channel_io_perm_failure)
 		return PCI_ERS_RESULT_DISCONNECT;
 
-	ret = t3_adapter_error(adapter, 0, 0);
+	t3_adapter_error(adapter, 0, 0);
 
 	/* Request a slot reset. */
 	return PCI_ERS_RESULT_NEED_RESET;
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index bcf07532953..ef02aa68c92 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -1164,12 +1164,10 @@ static void cxgb_redirect(struct dst_entry *old, struct dst_entry *new)
  */
 void *cxgb_alloc_mem(unsigned long size)
 {
-	void *p = kmalloc(size, GFP_KERNEL);
+	void *p = kzalloc(size, GFP_KERNEL);
 
 	if (!p)
-		p = vmalloc(size);
-	if (p)
-		memset(p, 0, size);
+		p = vzalloc(size);
 	return p;
 }
 
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index 3a6adf0b3e9..ec8579a0a80 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -1562,7 +1562,7 @@ static void tp_intr_handler(struct adapter *adapter)
 		{0}
 	};
 
-	static struct intr_info tp_intr_info_t3c[] = {
+	static const struct intr_info tp_intr_info_t3c[] = {
 		{0x1fffffff, "TP parity error", -1, 1},
 		{F_FLMRXFLSTEMPTY, "TP out of Rx pages", -1, 1},
 		{F_FLMTXFLSTEMPTY, "TP out of Tx pages", -1, 1},
diff --git a/drivers/net/cxgb4/cxgb4.h b/drivers/net/cxgb4/cxgb4.h
index 3d4253d311e..01d49eaa44d 100644
--- a/drivers/net/cxgb4/cxgb4.h
+++ b/drivers/net/cxgb4/cxgb4.h
@@ -482,11 +482,9 @@ struct adapter {
 	void __iomem *regs;
 	struct pci_dev *pdev;
 	struct device *pdev_dev;
-	unsigned long registered_device_map;
 	unsigned int fn;
 	unsigned int flags;
 
-	const char *name;
 	int msg_enable;
 
 	struct adapter_params params;
@@ -497,7 +495,7 @@ struct adapter {
 
 	struct {
 		unsigned short vec;
-		char desc[14];
+		char desc[IFNAMSIZ + 10];
 	} msix_info[MAX_INGQ + 1];
 
 	struct sge sge;
diff --git a/drivers/net/cxgb4/cxgb4_main.c b/drivers/net/cxgb4/cxgb4_main.c
index f50bc98310f..059c1eec8c3 100644
--- a/drivers/net/cxgb4/cxgb4_main.c
+++ b/drivers/net/cxgb4/cxgb4_main.c
@@ -522,39 +522,33 @@ static irqreturn_t t4_nondata_intr(int irq, void *cookie)
  */
 static void name_msix_vecs(struct adapter *adap)
 {
-	int i, j, msi_idx = 2, n = sizeof(adap->msix_info[0].desc) - 1;
+	int i, j, msi_idx = 2, n = sizeof(adap->msix_info[0].desc);
 
 	/* non-data interrupts */
-	snprintf(adap->msix_info[0].desc, n, "%s", adap->name);
-	adap->msix_info[0].desc[n] = 0;
+	snprintf(adap->msix_info[0].desc, n, "%s", adap->port[0]->name);
 
 	/* FW events */
-	snprintf(adap->msix_info[1].desc, n, "%s-FWeventq", adap->name);
-	adap->msix_info[1].desc[n] = 0;
+	snprintf(adap->msix_info[1].desc, n, "%s-FWeventq",
+		 adap->port[0]->name);
 
 	/* Ethernet queues */
 	for_each_port(adap, j) {
 		struct net_device *d = adap->port[j];
 		const struct port_info *pi = netdev_priv(d);
 
-		for (i = 0; i < pi->nqsets; i++, msi_idx++) {
+		for (i = 0; i < pi->nqsets; i++, msi_idx++)
 			snprintf(adap->msix_info[msi_idx].desc, n, "%s-Rx%d",
 				 d->name, i);
-			adap->msix_info[msi_idx].desc[n] = 0;
-		}
 	}
 
 	/* offload queues */
-	for_each_ofldrxq(&adap->sge, i) {
-		snprintf(adap->msix_info[msi_idx].desc, n, "%s-ofld%d",
-			 adap->name, i);
-		adap->msix_info[msi_idx++].desc[n] = 0;
-	}
-	for_each_rdmarxq(&adap->sge, i) {
-		snprintf(adap->msix_info[msi_idx].desc, n, "%s-rdma%d",
-			 adap->name, i);
-		adap->msix_info[msi_idx++].desc[n] = 0;
-	}
+	for_each_ofldrxq(&adap->sge, i)
+		snprintf(adap->msix_info[msi_idx++].desc, n, "%s-ofld%d",
+			 adap->port[0]->name, i);
+
+	for_each_rdmarxq(&adap->sge, i)
+		snprintf(adap->msix_info[msi_idx++].desc, n, "%s-rdma%d",
+			 adap->port[0]->name, i);
 }
 
 static int request_msix_queue_irqs(struct adapter *adap)
@@ -868,12 +862,10 @@ out:	release_firmware(fw);
  */
 void *t4_alloc_mem(size_t size)
 {
-	void *p = kmalloc(size, GFP_KERNEL);
+	void *p = kzalloc(size, GFP_KERNEL);
 
 	if (!p)
-		p = vmalloc(size);
-	if (p)
-		memset(p, 0, size);
+		p = vzalloc(size);
 	return p;
 }
 
@@ -1377,7 +1369,12 @@ static unsigned int from_fw_linkcaps(unsigned int type, unsigned int caps)
 	} else if (type == FW_PORT_TYPE_KR)
 		v |= SUPPORTED_Backplane | SUPPORTED_10000baseKR_Full;
 	else if (type == FW_PORT_TYPE_BP_AP)
-		v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC;
+		v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC |
+		     SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full;
+	else if (type == FW_PORT_TYPE_BP4_AP)
+		v |= SUPPORTED_Backplane | SUPPORTED_10000baseR_FEC |
+		     SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full |
+		     SUPPORTED_10000baseKX4_Full;
 	else if (type == FW_PORT_TYPE_FIBER_XFI ||
 		 type == FW_PORT_TYPE_FIBER_XAUI || type == FW_PORT_TYPE_SFP)
 		v |= SUPPORTED_FIBRE;
@@ -2668,7 +2665,7 @@ static int cxgb_up(struct adapter *adap)
 	} else {
 		err = request_irq(adap->pdev->irq, t4_intr_handler(adap),
 				  (adap->flags & USING_MSI) ? 0 : IRQF_SHARED,
-				  adap->name, adap);
+				  adap->port[0]->name, adap);
 		if (err)
 			goto irq_err;
 	}
@@ -2719,10 +2716,6 @@ static int cxgb_open(struct net_device *dev)
 			return err;
 	}
 
-	netif_set_real_num_tx_queues(dev, pi->nqsets);
-	err = netif_set_real_num_rx_queues(dev, pi->nqsets);
-	if (err)
-		return err;
 	err = link_start(dev);
 	if (!err)
 		netif_tx_start_all_queues(dev);
@@ -3491,49 +3484,53 @@ static int __devinit init_rss(struct adapter *adap)
 	return 0;
 }
 
-static void __devinit print_port_info(struct adapter *adap)
+static void __devinit print_port_info(const struct net_device *dev)
 {
 	static const char *base[] = {
 		"R XFI", "R XAUI", "T SGMII", "T XFI", "T XAUI", "KX4", "CX4",
-		"KX", "KR", "KR SFP+", "KR FEC"
+		"KX", "KR", "R SFP+", "KR/KX", "KR/KX/KX4"
 	};
 
-	int i;
 	char buf[80];
+	char *bufp = buf;
 	const char *spd = "";
+	const struct port_info *pi = netdev_priv(dev);
+	const struct adapter *adap = pi->adapter;
 
 	if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_2_5GB)
 		spd = " 2.5 GT/s";
 	else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_5_0GB)
 		spd = " 5 GT/s";
 
-	for_each_port(adap, i) {
-		struct net_device *dev = adap->port[i];
-		const struct port_info *pi = netdev_priv(dev);
-		char *bufp = buf;
+	if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M)
+		bufp += sprintf(bufp, "100/");
+	if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G)
+		bufp += sprintf(bufp, "1000/");
+	if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
+		bufp += sprintf(bufp, "10G/");
+	if (bufp != buf)
+		--bufp;
+	sprintf(bufp, "BASE-%s", base[pi->port_type]);
 
-		if (!test_bit(i, &adap->registered_device_map))
-			continue;
+	netdev_info(dev, "Chelsio %s rev %d %s %sNIC PCIe x%d%s%s\n",
+		    adap->params.vpd.id, adap->params.rev, buf,
+		    is_offload(adap) ? "R" : "", adap->params.pci.width, spd,
+		    (adap->flags & USING_MSIX) ? " MSI-X" :
+		    (adap->flags & USING_MSI) ? " MSI" : "");
+	netdev_info(dev, "S/N: %s, E/C: %s\n",
+		    adap->params.vpd.sn, adap->params.vpd.ec);
+}
 
-		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M)
-			bufp += sprintf(bufp, "100/");
-		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G)
-			bufp += sprintf(bufp, "1000/");
-		if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
-			bufp += sprintf(bufp, "10G/");
-		if (bufp != buf)
-			--bufp;
-		sprintf(bufp, "BASE-%s", base[pi->port_type]);
+static void __devinit enable_pcie_relaxed_ordering(struct pci_dev *dev)
+{
+	u16 v;
+	int pos;
 
-		netdev_info(dev, "Chelsio %s rev %d %s %sNIC PCIe x%d%s%s\n",
-			    adap->params.vpd.id, adap->params.rev,
-			    buf, is_offload(adap) ? "R" : "",
-			    adap->params.pci.width, spd,
-			    (adap->flags & USING_MSIX) ? " MSI-X" :
-			    (adap->flags & USING_MSI) ? " MSI" : "");
-		if (adap->name == dev->name)
-			netdev_info(dev, "S/N: %s, E/C: %s\n",
-				    adap->params.vpd.sn, adap->params.vpd.ec);
+	pos = pci_pcie_cap(dev);
+	if (pos > 0) {
+		pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &v);
+		v |= PCI_EXP_DEVCTL_RELAX_EN;
+		pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, v);
 	}
 }
 
@@ -3611,6 +3608,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 	}
 
 	pci_enable_pcie_error_reporting(pdev);
+	enable_pcie_relaxed_ordering(pdev);
 	pci_set_master(pdev);
 	pci_save_state(pdev);
 
@@ -3630,7 +3628,6 @@ static int __devinit init_one(struct pci_dev *pdev,
 	adapter->pdev = pdev;
 	adapter->pdev_dev = &pdev->dev;
 	adapter->fn = func;
-	adapter->name = pci_name(pdev);
 	adapter->msg_enable = dflt_msg_enable;
 	memset(adapter->chan_map, 0xff, sizeof(adapter->chan_map));
 
@@ -3721,27 +3718,24 @@ static int __devinit init_one(struct pci_dev *pdev,
 	 * register at least one net device.
 	 */
 	for_each_port(adapter, i) {
+		pi = adap2pinfo(adapter, i);
+		netif_set_real_num_tx_queues(adapter->port[i], pi->nqsets);
+		netif_set_real_num_rx_queues(adapter->port[i], pi->nqsets);
+
 		err = register_netdev(adapter->port[i]);
 		if (err)
-			dev_warn(&pdev->dev,
-				 "cannot register net device %s, skipping\n",
-				 adapter->port[i]->name);
-		else {
-			/*
-			 * Change the name we use for messages to the name of
-			 * the first successfully registered interface.
-			 */
-			if (!adapter->registered_device_map)
-				adapter->name = adapter->port[i]->name;
-
-			__set_bit(i, &adapter->registered_device_map);
-			adapter->chan_map[adap2pinfo(adapter, i)->tx_chan] = i;
-		}
+			break;
+		adapter->chan_map[pi->tx_chan] = i;
+		print_port_info(adapter->port[i]);
 	}
-	if (!adapter->registered_device_map) {
+	if (i == 0) {
 		dev_err(&pdev->dev, "could not register any net devices\n");
 		goto out_free_dev;
 	}
+	if (err) {
+		dev_warn(&pdev->dev, "only %d net devices registered\n", i);
+		err = 0;
+	};
 
 	if (cxgb4_debugfs_root) {
 		adapter->debugfs_root = debugfs_create_dir(pci_name(pdev),
@@ -3752,8 +3746,6 @@ static int __devinit init_one(struct pci_dev *pdev,
 	if (is_offload(adapter))
 		attach_ulds(adapter);
 
-	print_port_info(adapter);
-
 sriov:
 #ifdef CONFIG_PCI_IOV
 	if (func < ARRAY_SIZE(num_vf) && num_vf[func] > 0)
@@ -3792,7 +3784,7 @@ static void __devexit remove_one(struct pci_dev *pdev)
 			detach_ulds(adapter);
 
 		for_each_port(adapter, i)
-			if (test_bit(i, &adapter->registered_device_map))
+			if (adapter->port[i]->reg_state == NETREG_REGISTERED)
 				unregister_netdev(adapter->port[i]);
 
 		if (adapter->debugfs_root)
diff --git a/drivers/net/cxgb4/sge.c b/drivers/net/cxgb4/sge.c
index 17022258ed6..311471b439a 100644
--- a/drivers/net/cxgb4/sge.c
+++ b/drivers/net/cxgb4/sge.c
@@ -579,6 +579,7 @@ static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
  *	@phys: the physical address of the allocated ring
  *	@metadata: address of the array holding the SW state for the ring
  *	@stat_size: extra space in HW ring for status information
+ *	@node: preferred node for memory allocations
  *
  *	Allocates resources for an SGE descriptor ring, such as Tx queues,
  *	free buffer lists, or response queues.  Each SGE ring requires
@@ -590,7 +591,7 @@ static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
  */
 static void *alloc_ring(struct device *dev, size_t nelem, size_t elem_size,
 			size_t sw_size, dma_addr_t *phys, void *metadata,
-			size_t stat_size)
+			size_t stat_size, int node)
 {
 	size_t len = nelem * elem_size + stat_size;
 	void *s = NULL;
@@ -599,7 +600,7 @@ static void *alloc_ring(struct device *dev, size_t nelem, size_t elem_size,
 	if (!p)
 		return NULL;
 	if (sw_size) {
-		s = kcalloc(nelem, sw_size, GFP_KERNEL);
+		s = kzalloc_node(nelem * sw_size, GFP_KERNEL, node);
 
 		if (!s) {
 			dma_free_coherent(dev, len, p, *phys);
@@ -1982,7 +1983,7 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
 	iq->size = roundup(iq->size, 16);
 
 	iq->desc = alloc_ring(adap->pdev_dev, iq->size, iq->iqe_len, 0,
-			      &iq->phys_addr, NULL, 0);
+			      &iq->phys_addr, NULL, 0, NUMA_NO_NODE);
 	if (!iq->desc)
 		return -ENOMEM;
 
@@ -2008,12 +2009,14 @@ int t4_sge_alloc_rxq(struct adapter *adap, struct sge_rspq *iq, bool fwevtq,
 		fl->size = roundup(fl->size, 8);
 		fl->desc = alloc_ring(adap->pdev_dev, fl->size, sizeof(__be64),
 				      sizeof(struct rx_sw_desc), &fl->addr,
-				      &fl->sdesc, STAT_LEN);
+				      &fl->sdesc, STAT_LEN, NUMA_NO_NODE);
 		if (!fl->desc)
 			goto fl_nomem;
 
 		flsz = fl->size / 8 + STAT_LEN / sizeof(struct tx_desc);
 		c.iqns_to_fl0congen = htonl(FW_IQ_CMD_FL0PACKEN |
+					    FW_IQ_CMD_FL0FETCHRO(1) |
+					    FW_IQ_CMD_FL0DATARO(1) |
 					    FW_IQ_CMD_FL0PADEN);
 		c.fl0dcaen_to_fl0cidxfthresh = htons(FW_IQ_CMD_FL0FBMIN(2) |
 				FW_IQ_CMD_FL0FBMAX(3));
@@ -2093,7 +2096,8 @@ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
 
 	txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size,
 			sizeof(struct tx_desc), sizeof(struct tx_sw_desc),
-			&txq->q.phys_addr, &txq->q.sdesc, STAT_LEN);
+			&txq->q.phys_addr, &txq->q.sdesc, STAT_LEN,
+			netdev_queue_numa_node_read(netdevq));
 	if (!txq->q.desc)
 		return -ENOMEM;
 
@@ -2106,6 +2110,7 @@ int t4_sge_alloc_eth_txq(struct adapter *adap, struct sge_eth_txq *txq,
 	c.viid_pkd = htonl(FW_EQ_ETH_CMD_VIID(pi->viid));
 	c.fetchszm_to_iqid = htonl(FW_EQ_ETH_CMD_HOSTFCMODE(2) |
 				   FW_EQ_ETH_CMD_PCIECHN(pi->tx_chan) |
+				   FW_EQ_ETH_CMD_FETCHRO(1) |
 				   FW_EQ_ETH_CMD_IQID(iqid));
 	c.dcaen_to_eqsize = htonl(FW_EQ_ETH_CMD_FBMIN(2) |
 				  FW_EQ_ETH_CMD_FBMAX(3) |
@@ -2144,7 +2149,7 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
 
 	txq->q.desc = alloc_ring(adap->pdev_dev, nentries,
 				 sizeof(struct tx_desc), 0, &txq->q.phys_addr,
-				 NULL, 0);
+				 NULL, 0, NUMA_NO_NODE);
 	if (!txq->q.desc)
 		return -ENOMEM;
 
@@ -2158,6 +2163,7 @@ int t4_sge_alloc_ctrl_txq(struct adapter *adap, struct sge_ctrl_txq *txq,
 	c.physeqid_pkd = htonl(0);
 	c.fetchszm_to_iqid = htonl(FW_EQ_CTRL_CMD_HOSTFCMODE(2) |
 				   FW_EQ_CTRL_CMD_PCIECHN(pi->tx_chan) |
+				   FW_EQ_CTRL_CMD_FETCHRO |
 				   FW_EQ_CTRL_CMD_IQID(iqid));
 	c.dcaen_to_eqsize = htonl(FW_EQ_CTRL_CMD_FBMIN(2) |
 				  FW_EQ_CTRL_CMD_FBMAX(3) |
@@ -2194,7 +2200,8 @@ int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq,
 
 	txq->q.desc = alloc_ring(adap->pdev_dev, txq->q.size,
 			sizeof(struct tx_desc), sizeof(struct tx_sw_desc),
-			&txq->q.phys_addr, &txq->q.sdesc, STAT_LEN);
+			&txq->q.phys_addr, &txq->q.sdesc, STAT_LEN,
+			NUMA_NO_NODE);
 	if (!txq->q.desc)
 		return -ENOMEM;
 
@@ -2207,6 +2214,7 @@ int t4_sge_alloc_ofld_txq(struct adapter *adap, struct sge_ofld_txq *txq,
 				 FW_EQ_OFLD_CMD_EQSTART | FW_LEN16(c));
 	c.fetchszm_to_iqid = htonl(FW_EQ_OFLD_CMD_HOSTFCMODE(2) |
 				   FW_EQ_OFLD_CMD_PCIECHN(pi->tx_chan) |
+				   FW_EQ_OFLD_CMD_FETCHRO(1) |
 				   FW_EQ_OFLD_CMD_IQID(iqid));
 	c.dcaen_to_eqsize = htonl(FW_EQ_OFLD_CMD_FBMIN(2) |
 				  FW_EQ_OFLD_CMD_FBMAX(3) |
diff --git a/drivers/net/cxgb4/t4_hw.c b/drivers/net/cxgb4/t4_hw.c
index bb813d94aea..b9fd8a6f2cc 100644
--- a/drivers/net/cxgb4/t4_hw.c
+++ b/drivers/net/cxgb4/t4_hw.c
@@ -183,7 +183,7 @@ static void dump_mbox(struct adapter *adap, int mbox, u32 data_reg)
 int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,
 		    void *rpl, bool sleep_ok)
 {
-	static int delay[] = {
+	static const int delay[] = {
 		1, 1, 3, 5, 10, 10, 20, 50, 100, 200
 	};
 
@@ -330,18 +330,6 @@ int t4_edc_read(struct adapter *adap, int idx, u32 addr, __be32 *data, u64 *ecc)
 	return 0;
 }
 
-/*
- * Partial EEPROM Vital Product Data structure.  Includes only the ID and
- * VPD-R header.
- */
-struct t4_vpd_hdr {
-	u8  id_tag;
-	u8  id_len[2];
-	u8  id_data[ID_LEN];
-	u8  vpdr_tag;
-	u8  vpdr_len[2];
-};
-
 #define EEPROM_STAT_ADDR   0x7bfc
 #define VPD_BASE           0
 #define VPD_LEN            512
@@ -370,25 +358,38 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable)
 static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 {
 	int i, ret;
-	int ec, sn, v2;
+	int ec, sn;
 	u8 vpd[VPD_LEN], csum;
-	unsigned int vpdr_len;
-	const struct t4_vpd_hdr *v;
+	unsigned int vpdr_len, kw_offset, id_len;
 
 	ret = pci_read_vpd(adapter->pdev, VPD_BASE, sizeof(vpd), vpd);
 	if (ret < 0)
 		return ret;
 
-	v = (const struct t4_vpd_hdr *)vpd;
-	vpdr_len = pci_vpd_lrdt_size(&v->vpdr_tag);
-	if (vpdr_len + sizeof(struct t4_vpd_hdr) > VPD_LEN) {
+	if (vpd[0] != PCI_VPD_LRDT_ID_STRING) {
+		dev_err(adapter->pdev_dev, "missing VPD ID string\n");
+		return -EINVAL;
+	}
+
+	id_len = pci_vpd_lrdt_size(vpd);
+	if (id_len > ID_LEN)
+		id_len = ID_LEN;
+
+	i = pci_vpd_find_tag(vpd, 0, VPD_LEN, PCI_VPD_LRDT_RO_DATA);
+	if (i < 0) {
+		dev_err(adapter->pdev_dev, "missing VPD-R section\n");
+		return -EINVAL;
+	}
+
+	vpdr_len = pci_vpd_lrdt_size(&vpd[i]);
+	kw_offset = i + PCI_VPD_LRDT_TAG_SIZE;
+	if (vpdr_len + kw_offset > VPD_LEN) {
 		dev_err(adapter->pdev_dev, "bad VPD-R length %u\n", vpdr_len);
 		return -EINVAL;
 	}
 
 #define FIND_VPD_KW(var, name) do { \
-	var = pci_vpd_find_info_keyword(&v->id_tag, sizeof(struct t4_vpd_hdr), \
-					vpdr_len, name); \
+	var = pci_vpd_find_info_keyword(vpd, kw_offset, vpdr_len, name); \
 	if (var < 0) { \
 		dev_err(adapter->pdev_dev, "missing VPD keyword " name "\n"); \
 		return -EINVAL; \
@@ -408,11 +409,9 @@ static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
 
 	FIND_VPD_KW(ec, "EC");
 	FIND_VPD_KW(sn, "SN");
-	FIND_VPD_KW(v2, "V2");
 #undef FIND_VPD_KW
 
-	p->cclk = simple_strtoul(vpd + v2, NULL, 10);
-	memcpy(p->id, v->id_data, ID_LEN);
+	memcpy(p->id, vpd + PCI_VPD_LRDT_TAG_SIZE, id_len);
 	strim(p->id);
 	memcpy(p->ec, vpd + ec, EC_LEN);
 	strim(p->ec);
@@ -919,7 +918,7 @@ static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg,
  */
 static void pcie_intr_handler(struct adapter *adapter)
 {
-	static struct intr_info sysbus_intr_info[] = {
+	static const struct intr_info sysbus_intr_info[] = {
 		{ RNPP, "RXNP array parity error", -1, 1 },
 		{ RPCP, "RXPC array parity error", -1, 1 },
 		{ RCIP, "RXCIF array parity error", -1, 1 },
@@ -927,7 +926,7 @@ static void pcie_intr_handler(struct adapter *adapter)
 		{ RFTP, "RXFT array parity error", -1, 1 },
 		{ 0 }
 	};
-	static struct intr_info pcie_port_intr_info[] = {
+	static const struct intr_info pcie_port_intr_info[] = {
 		{ TPCP, "TXPC array parity error", -1, 1 },
 		{ TNPP, "TXNP array parity error", -1, 1 },
 		{ TFTP, "TXFT array parity error", -1, 1 },
@@ -939,7 +938,7 @@ static void pcie_intr_handler(struct adapter *adapter)
 		{ TDUE, "Tx uncorrectable data error", -1, 1 },
 		{ 0 }
 	};
-	static struct intr_info pcie_intr_info[] = {
+	static const struct intr_info pcie_intr_info[] = {
 		{ MSIADDRLPERR, "MSI AddrL parity error", -1, 1 },
 		{ MSIADDRHPERR, "MSI AddrH parity error", -1, 1 },
 		{ MSIDATAPERR, "MSI data parity error", -1, 1 },
@@ -991,7 +990,7 @@ static void pcie_intr_handler(struct adapter *adapter)
  */
 static void tp_intr_handler(struct adapter *adapter)
 {
-	static struct intr_info tp_intr_info[] = {
+	static const struct intr_info tp_intr_info[] = {
 		{ 0x3fffffff, "TP parity error", -1, 1 },
 		{ FLMTXFLSTEMPTY, "TP out of Tx pages", -1, 1 },
 		{ 0 }
@@ -1008,7 +1007,7 @@ static void sge_intr_handler(struct adapter *adapter)
 {
 	u64 v;
 
-	static struct intr_info sge_intr_info[] = {
+	static const struct intr_info sge_intr_info[] = {
 		{ ERR_CPL_EXCEED_IQE_SIZE,
 		  "SGE received CPL exceeding IQE size", -1, 1 },
 		{ ERR_INVALID_CIDX_INC,
@@ -1053,7 +1052,7 @@ static void sge_intr_handler(struct adapter *adapter)
  */
 static void cim_intr_handler(struct adapter *adapter)
 {
-	static struct intr_info cim_intr_info[] = {
+	static const struct intr_info cim_intr_info[] = {
 		{ PREFDROPINT, "CIM control register prefetch drop", -1, 1 },
 		{ OBQPARERR, "CIM OBQ parity error", -1, 1 },
 		{ IBQPARERR, "CIM IBQ parity error", -1, 1 },
@@ -1063,7 +1062,7 @@ static void cim_intr_handler(struct adapter *adapter)
 		{ TIEQOUTPARERRINT, "CIM TIEQ incoming parity error", -1, 1 },
 		{ 0 }
 	};
-	static struct intr_info cim_upintr_info[] = {
+	static const struct intr_info cim_upintr_info[] = {
 		{ RSVDSPACEINT, "CIM reserved space access", -1, 1 },
 		{ ILLTRANSINT, "CIM illegal transaction", -1, 1 },
 		{ ILLWRINT, "CIM illegal write", -1, 1 },
@@ -1110,7 +1109,7 @@ static void cim_intr_handler(struct adapter *adapter)
  */
 static void ulprx_intr_handler(struct adapter *adapter)
 {
-	static struct intr_info ulprx_intr_info[] = {
+	static const struct intr_info ulprx_intr_info[] = {
 		{ 0x1800000, "ULPRX context error", -1, 1 },
 		{ 0x7fffff, "ULPRX parity error", -1, 1 },
 		{ 0 }
@@ -1125,7 +1124,7 @@ static void ulprx_intr_handler(struct adapter *adapter)
  */
 static void ulptx_intr_handler(struct adapter *adapter)
 {
-	static struct intr_info ulptx_intr_info[] = {
+	static const struct intr_info ulptx_intr_info[] = {
 		{ PBL_BOUND_ERR_CH3, "ULPTX channel 3 PBL out of bounds", -1,
 		  0 },
 		{ PBL_BOUND_ERR_CH2, "ULPTX channel 2 PBL out of bounds", -1,
@@ -1147,7 +1146,7 @@ static void ulptx_intr_handler(struct adapter *adapter)
  */
 static void pmtx_intr_handler(struct adapter *adapter)
 {
-	static struct intr_info pmtx_intr_info[] = {
+	static const struct intr_info pmtx_intr_info[] = {
 		{ PCMD_LEN_OVFL0, "PMTX channel 0 pcmd too large", -1, 1 },
 		{ PCMD_LEN_OVFL1, "PMTX channel 1 pcmd too large", -1, 1 },
 		{ PCMD_LEN_OVFL2, "PMTX channel 2 pcmd too large", -1, 1 },
@@ -1169,7 +1168,7 @@ static void pmtx_intr_handler(struct adapter *adapter)
  */
 static void pmrx_intr_handler(struct adapter *adapter)
 {
-	static struct intr_info pmrx_intr_info[] = {
+	static const struct intr_info pmrx_intr_info[] = {
 		{ ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1 },
 		{ PMRX_FRAMING_ERROR, "PMRX framing error", -1, 1 },
 		{ OCSPI_PAR_ERROR, "PMRX ocspi parity error", -1, 1 },
@@ -1188,7 +1187,7 @@ static void pmrx_intr_handler(struct adapter *adapter)
  */
 static void cplsw_intr_handler(struct adapter *adapter)
 {
-	static struct intr_info cplsw_intr_info[] = {
+	static const struct intr_info cplsw_intr_info[] = {
 		{ CIM_OP_MAP_PERR, "CPLSW CIM op_map parity error", -1, 1 },
 		{ CIM_OVFL_ERROR, "CPLSW CIM overflow", -1, 1 },
 		{ TP_FRAMING_ERROR, "CPLSW TP framing error", -1, 1 },
@@ -1207,7 +1206,7 @@ static void cplsw_intr_handler(struct adapter *adapter)
  */
 static void le_intr_handler(struct adapter *adap)
 {
-	static struct intr_info le_intr_info[] = {
+	static const struct intr_info le_intr_info[] = {
 		{ LIPMISS, "LE LIP miss", -1, 0 },
 		{ LIP0, "LE 0 LIP error", -1, 0 },
 		{ PARITYERR, "LE parity error", -1, 1 },
@@ -1225,11 +1224,11 @@ static void le_intr_handler(struct adapter *adap)
  */
 static void mps_intr_handler(struct adapter *adapter)
 {
-	static struct intr_info mps_rx_intr_info[] = {
+	static const struct intr_info mps_rx_intr_info[] = {
 		{ 0xffffff, "MPS Rx parity error", -1, 1 },
 		{ 0 }
 	};
-	static struct intr_info mps_tx_intr_info[] = {
+	static const struct intr_info mps_tx_intr_info[] = {
 		{ TPFIFO, "MPS Tx TP FIFO parity error", -1, 1 },
 		{ NCSIFIFO, "MPS Tx NC-SI FIFO parity error", -1, 1 },
 		{ TXDATAFIFO, "MPS Tx data FIFO parity error", -1, 1 },
@@ -1239,25 +1238,25 @@ static void mps_intr_handler(struct adapter *adapter)
 		{ FRMERR, "MPS Tx framing error", -1, 1 },
 		{ 0 }
 	};
-	static struct intr_info mps_trc_intr_info[] = {
+	static const struct intr_info mps_trc_intr_info[] = {
 		{ FILTMEM, "MPS TRC filter parity error", -1, 1 },
 		{ PKTFIFO, "MPS TRC packet FIFO parity error", -1, 1 },
 		{ MISCPERR, "MPS TRC misc parity error", -1, 1 },
 		{ 0 }
 	};
-	static struct intr_info mps_stat_sram_intr_info[] = {
+	static const struct intr_info mps_stat_sram_intr_info[] = {
 		{ 0x1fffff, "MPS statistics SRAM parity error", -1, 1 },
 		{ 0 }
 	};
-	static struct intr_info mps_stat_tx_intr_info[] = {
+	static const struct intr_info mps_stat_tx_intr_info[] = {
 		{ 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 },
 		{ 0 }
 	};
-	static struct intr_info mps_stat_rx_intr_info[] = {
+	static const struct intr_info mps_stat_rx_intr_info[] = {
 		{ 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 },
 		{ 0 }
 	};
-	static struct intr_info mps_cls_intr_info[] = {
+	static const struct intr_info mps_cls_intr_info[] = {
 		{ MATCHSRAM, "MPS match SRAM parity error", -1, 1 },
 		{ MATCHTCAM, "MPS match TCAM parity error", -1, 1 },
 		{ HASHSRAM, "MPS hash SRAM parity error", -1, 1 },
@@ -1356,7 +1355,7 @@ static void ma_intr_handler(struct adapter *adap)
  */
 static void smb_intr_handler(struct adapter *adap)
 {
-	static struct intr_info smb_intr_info[] = {
+	static const struct intr_info smb_intr_info[] = {
 		{ MSTTXFIFOPARINT, "SMB master Tx FIFO parity error", -1, 1 },
 		{ MSTRXFIFOPARINT, "SMB master Rx FIFO parity error", -1, 1 },
 		{ SLVFIFOPARINT, "SMB slave FIFO parity error", -1, 1 },
@@ -1372,7 +1371,7 @@ static void smb_intr_handler(struct adapter *adap)
  */
 static void ncsi_intr_handler(struct adapter *adap)
 {
-	static struct intr_info ncsi_intr_info[] = {
+	static const struct intr_info ncsi_intr_info[] = {
 		{ CIM_DM_PRTY_ERR, "NC-SI CIM parity error", -1, 1 },
 		{ MPS_DM_PRTY_ERR, "NC-SI MPS parity error", -1, 1 },
 		{ TXFIFO_PRTY_ERR, "NC-SI Tx FIFO parity error", -1, 1 },
@@ -1410,7 +1409,7 @@ static void xgmac_intr_handler(struct adapter *adap, int port)
  */
 static void pl_intr_handler(struct adapter *adap)
 {
-	static struct intr_info pl_intr_info[] = {
+	static const struct intr_info pl_intr_info[] = {
 		{ FATALPERR, "T4 fatal parity error", -1, 1 },
 		{ PERRVFID, "PL VFID_MAP parity error", -1, 1 },
 		{ 0 }
@@ -2408,7 +2407,7 @@ int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox,
 		if (index < NEXACT_MAC)
 			ret++;
 		else if (hash)
-			*hash |= (1 << hash_mac_addr(addr[i]));
+			*hash |= (1ULL << hash_mac_addr(addr[i]));
 	}
 	return ret;
 }
diff --git a/drivers/net/cxgb4/t4fw_api.h b/drivers/net/cxgb4/t4fw_api.h
index 940584a8a64..edcfd7ec780 100644
--- a/drivers/net/cxgb4/t4fw_api.h
+++ b/drivers/net/cxgb4/t4fw_api.h
@@ -1239,6 +1239,7 @@ enum fw_port_type {
 	FW_PORT_TYPE_KR,
 	FW_PORT_TYPE_SFP,
 	FW_PORT_TYPE_BP_AP,
+	FW_PORT_TYPE_BP4_AP,
 
 	FW_PORT_TYPE_NONE = FW_PORT_CMD_PTYPE_MASK
 };
diff --git a/drivers/net/cxgb4vf/adapter.h b/drivers/net/cxgb4vf/adapter.h
index 8ea01962e04..4766b4116b4 100644
--- a/drivers/net/cxgb4vf/adapter.h
+++ b/drivers/net/cxgb4vf/adapter.h
@@ -60,7 +60,7 @@ enum {
 	 * MSI-X interrupt index usage.
 	 */
 	MSIX_FW		= 0,		/* MSI-X index for firmware Q */
-	MSIX_NIQFLINT	= 1,		/* MSI-X index base for Ingress Qs */
+	MSIX_IQFLINT	= 1,		/* MSI-X index base for Ingress Qs */
 	MSIX_EXTRAS	= 1,
 	MSIX_ENTRIES	= MAX_ETH_QSETS + MSIX_EXTRAS,
 
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 6de5e2e448a..3c403f89575 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -280,9 +280,7 @@ static void name_msix_vecs(struct adapter *adapter)
 		const struct port_info *pi = netdev_priv(dev);
 		int qs, msi;
 
-		for (qs = 0, msi = MSIX_NIQFLINT;
-		     qs < pi->nqsets;
-		     qs++, msi++) {
+		for (qs = 0, msi = MSIX_IQFLINT; qs < pi->nqsets; qs++, msi++) {
 			snprintf(adapter->msix_info[msi].desc, namelen,
 				 "%s-%d", dev->name, qs);
 			adapter->msix_info[msi].desc[namelen] = 0;
@@ -309,7 +307,7 @@ static int request_msix_queue_irqs(struct adapter *adapter)
 	/*
 	 * Ethernet queues.
 	 */
-	msi = MSIX_NIQFLINT;
+	msi = MSIX_IQFLINT;
 	for_each_ethrxq(s, rxq) {
 		err = request_irq(adapter->msix_info[msi].vec,
 				  t4vf_sge_intr_msix, 0,
@@ -337,7 +335,7 @@ static void free_msix_queue_irqs(struct adapter *adapter)
 	int rxq, msi;
 
 	free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq);
-	msi = MSIX_NIQFLINT;
+	msi = MSIX_IQFLINT;
 	for_each_ethrxq(s, rxq)
 		free_irq(adapter->msix_info[msi++].vec,
 			 &s->ethrxq[rxq].rspq);
@@ -527,7 +525,7 @@ static int setup_sge_queues(struct adapter *adapter)
 	 * brought up at which point lots of things get nailed down
 	 * permanently ...
 	 */
-	msix = MSIX_NIQFLINT;
+	msix = MSIX_IQFLINT;
 	for_each_port(adapter, pidx) {
 		struct net_device *dev = adapter->port[pidx];
 		struct port_info *pi = netdev_priv(dev);
@@ -753,7 +751,9 @@ static int cxgb4vf_open(struct net_device *dev)
 	if (err)
 		return err;
 	set_bit(pi->port_id, &adapter->open_device_map);
-	link_start(dev);
+	err = link_start(dev);
+	if (err)
+		return err;
 	netif_tx_start_all_queues(dev);
 	return 0;
 }
@@ -814,40 +814,48 @@ static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev)
 }
 
 /*
- * Collect up to maxaddrs worth of a netdevice's unicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's unicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
  */
-static inline int collect_netdev_uc_list_addrs(const struct net_device *dev,
-					       const u8 **addr,
-					       unsigned int maxaddrs)
+static inline unsigned int collect_netdev_uc_list_addrs(const struct net_device *dev,
+							const u8 **addr,
+							unsigned int offset,
+							unsigned int maxaddrs)
 {
+	unsigned int index = 0;
 	unsigned int naddr = 0;
 	const struct netdev_hw_addr *ha;
 
-	for_each_dev_addr(dev, ha) {
-		addr[naddr++] = ha->addr;
-		if (naddr >= maxaddrs)
-			break;
-	}
+	for_each_dev_addr(dev, ha)
+		if (index++ >= offset) {
+			addr[naddr++] = ha->addr;
+			if (naddr >= maxaddrs)
+				break;
+		}
 	return naddr;
 }
 
 /*
- * Collect up to maxaddrs worth of a netdevice's multicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's multicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
  */
-static inline int collect_netdev_mc_list_addrs(const struct net_device *dev,
-					       const u8 **addr,
-					       unsigned int maxaddrs)
+static inline unsigned int collect_netdev_mc_list_addrs(const struct net_device *dev,
+							const u8 **addr,
+							unsigned int offset,
+							unsigned int maxaddrs)
 {
+	unsigned int index = 0;
 	unsigned int naddr = 0;
 	const struct netdev_hw_addr *ha;
 
-	netdev_for_each_mc_addr(ha, dev) {
-		addr[naddr++] = ha->addr;
-		if (naddr >= maxaddrs)
-			break;
-	}
+	netdev_for_each_mc_addr(ha, dev)
+		if (index++ >= offset) {
+			addr[naddr++] = ha->addr;
+			if (naddr >= maxaddrs)
+				break;
+		}
 	return naddr;
 }
 
@@ -860,16 +868,20 @@ static int set_addr_filters(const struct net_device *dev, bool sleep)
 	u64 mhash = 0;
 	u64 uhash = 0;
 	bool free = true;
-	u16 filt_idx[7];
+	unsigned int offset, naddr;
 	const u8 *addr[7];
-	int ret, naddr = 0;
+	int ret;
 	const struct port_info *pi = netdev_priv(dev);
 
 	/* first do the secondary unicast addresses */
-	naddr = collect_netdev_uc_list_addrs(dev, addr, ARRAY_SIZE(addr));
-	if (naddr > 0) {
+	for (offset = 0; ; offset += naddr) {
+		naddr = collect_netdev_uc_list_addrs(dev, addr, offset,
+						     ARRAY_SIZE(addr));
+		if (naddr == 0)
+			break;
+
 		ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
-					  naddr, addr, filt_idx, &uhash, sleep);
+					  naddr, addr, NULL, &uhash, sleep);
 		if (ret < 0)
 			return ret;
 
@@ -877,12 +889,17 @@ static int set_addr_filters(const struct net_device *dev, bool sleep)
 	}
 
 	/* next set up the multicast addresses */
-	naddr = collect_netdev_mc_list_addrs(dev, addr, ARRAY_SIZE(addr));
-	if (naddr > 0) {
+	for (offset = 0; ; offset += naddr) {
+		naddr = collect_netdev_mc_list_addrs(dev, addr, offset,
+						     ARRAY_SIZE(addr));
+		if (naddr == 0)
+			break;
+
 		ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
-					  naddr, addr, filt_idx, &mhash, sleep);
+					  naddr, addr, NULL, &mhash, sleep);
 		if (ret < 0)
 			return ret;
+		free = false;
 	}
 
 	return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0,
@@ -1103,18 +1120,6 @@ static int cxgb4vf_set_mac_addr(struct net_device *dev, void *_addr)
 	return 0;
 }
 
-/*
- * Return a TX Queue on which to send the specified skb.
- */
-static u16 cxgb4vf_select_queue(struct net_device *dev, struct sk_buff *skb)
-{
-	/*
-	 * XXX For now just use the default hash but we probably want to
-	 * XXX look at other possibilities ...
-	 */
-	return skb_tx_hash(dev, skb);
-}
-
 #ifdef CONFIG_NET_POLL_CONTROLLER
 /*
  * Poll all of our receive queues.  This is called outside of normal interrupt
@@ -1358,6 +1363,8 @@ struct queue_port_stats {
 	u64 rx_csum;
 	u64 vlan_ex;
 	u64 vlan_ins;
+	u64 lro_pkts;
+	u64 lro_merged;
 };
 
 /*
@@ -1395,6 +1402,8 @@ static const char stats_strings[][ETH_GSTRING_LEN] = {
 	"RxCsumGood        ",
 	"VLANextractions   ",
 	"VLANinsertions    ",
+	"GROPackets        ",
+	"GROMerged         ",
 };
 
 /*
@@ -1444,6 +1453,8 @@ static void collect_sge_port_stats(const struct adapter *adapter,
 		stats->rx_csum += rxq->stats.rx_cso;
 		stats->vlan_ex += rxq->stats.vlan_ex;
 		stats->vlan_ins += txq->vlan_ins;
+		stats->lro_pkts += rxq->stats.lro_pkts;
+		stats->lro_merged += rxq->stats.lro_merged;
 	}
 }
 
@@ -1540,14 +1551,19 @@ static void cxgb4vf_get_wol(struct net_device *dev,
 }
 
 /*
+ * TCP Segmentation Offload flags which we support.
+ */
+#define TSO_FLAGS (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN)
+
+/*
  * Set TCP Segmentation Offloading feature capabilities.
  */
 static int cxgb4vf_set_tso(struct net_device *dev, u32 tso)
 {
 	if (tso)
-		dev->features |= NETIF_F_TSO | NETIF_F_TSO6;
+		dev->features |= TSO_FLAGS;
 	else
-		dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6);
+		dev->features &= ~TSO_FLAGS;
 	return 0;
 }
 
@@ -2038,7 +2054,7 @@ static int __devinit setup_debugfs(struct adapter *adapter)
  * Tear down the /sys/kernel/debug/cxgb4vf sub-nodes created above.  We leave
  * it to our caller to tear down the directory (debugfs_root).
  */
-static void __devexit cleanup_debugfs(struct adapter *adapter)
+static void cleanup_debugfs(struct adapter *adapter)
 {
 	BUG_ON(adapter->debugfs_root == NULL);
 
@@ -2056,7 +2072,7 @@ static void __devexit cleanup_debugfs(struct adapter *adapter)
  * adapter parameters we're going to be using and initialize basic adapter
  * hardware support.
  */
-static int adap_init0(struct adapter *adapter)
+static int __devinit adap_init0(struct adapter *adapter)
 {
 	struct vf_resources *vfres = &adapter->params.vfres;
 	struct sge_params *sge_params = &adapter->params.sge;
@@ -2075,6 +2091,22 @@ static int adap_init0(struct adapter *adapter)
 	}
 
 	/*
+	 * Some environments do not properly handle PCIE FLRs -- e.g. in Linux
+	 * 2.6.31 and later we can't call pci_reset_function() in order to
+	 * issue an FLR because of a self- deadlock on the device semaphore.
+	 * Meanwhile, the OS infrastructure doesn't issue FLRs in all the
+	 * cases where they're needed -- for instance, some versions of KVM
+	 * fail to reset "Assigned Devices" when the VM reboots.  Therefore we
+	 * use the firmware based reset in order to reset any per function
+	 * state.
+	 */
+	err = t4vf_fw_reset(adapter);
+	if (err < 0) {
+		dev_err(adapter->pdev_dev, "FW reset failed: err=%d\n", err);
+		return err;
+	}
+
+	/*
 	 * Grab basic operational parameters.  These will predominantly have
 	 * been set up by the Physical Function Driver or will be hard coded
 	 * into the adapter.  We just have to live with them ...  Note that
@@ -2246,6 +2278,7 @@ static void __devinit cfg_queues(struct adapter *adapter)
 {
 	struct sge *s = &adapter->sge;
 	int q10g, n10g, qidx, pidx, qs;
+	size_t iqe_size;
 
 	/*
 	 * We should not be called till we know how many Queue Sets we can
@@ -2290,6 +2323,13 @@ static void __devinit cfg_queues(struct adapter *adapter)
 	s->ethqsets = qidx;
 
 	/*
+	 * The Ingress Queue Entry Size for our various Response Queues needs
+	 * to be big enough to accommodate the largest message we can receive
+	 * from the chip/firmware; which is 64 bytes ...
+	 */
+	iqe_size = 64;
+
+	/*
 	 * Set up default Queue Set parameters ...  Start off with the
 	 * shortest interrupt holdoff timer.
 	 */
@@ -2297,7 +2337,7 @@ static void __devinit cfg_queues(struct adapter *adapter)
 		struct sge_eth_rxq *rxq = &s->ethrxq[qs];
 		struct sge_eth_txq *txq = &s->ethtxq[qs];
 
-		init_rspq(&rxq->rspq, 0, 0, 1024, L1_CACHE_BYTES);
+		init_rspq(&rxq->rspq, 0, 0, 1024, iqe_size);
 		rxq->fl.size = 72;
 		txq->q.size = 1024;
 	}
@@ -2306,8 +2346,7 @@ static void __devinit cfg_queues(struct adapter *adapter)
 	 * The firmware event queue is used for link state changes and
 	 * notifications of TX DMA completions.
 	 */
-	init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512,
-		  L1_CACHE_BYTES);
+	init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512, iqe_size);
 
 	/*
 	 * The forwarded interrupt queue is used when we're in MSI interrupt
@@ -2323,7 +2362,7 @@ static void __devinit cfg_queues(struct adapter *adapter)
 	 * any time ...
 	 */
 	init_rspq(&s->intrq, SGE_TIMER_RSTRT_CNTR, 0, MSIX_ENTRIES + 1,
-		  L1_CACHE_BYTES);
+		  iqe_size);
 }
 
 /*
@@ -2417,7 +2456,6 @@ static const struct net_device_ops cxgb4vf_netdev_ops	= {
 	.ndo_get_stats		= cxgb4vf_get_stats,
 	.ndo_set_rx_mode	= cxgb4vf_set_rxmode,
 	.ndo_set_mac_address	= cxgb4vf_set_mac_addr,
-	.ndo_select_queue	= cxgb4vf_select_queue,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_do_ioctl		= cxgb4vf_do_ioctl,
 	.ndo_change_mtu		= cxgb4vf_change_mtu,
@@ -2465,7 +2503,6 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 		version_printed = 1;
 	}
 
-
 	/*
 	 * Initialize generic PCI device state.
 	 */
@@ -2602,7 +2639,7 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 		netif_carrier_off(netdev);
 		netdev->irq = pdev->irq;
 
-		netdev->features = (NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
+		netdev->features = (NETIF_F_SG | TSO_FLAGS |
 				    NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
 				    NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
 				    NETIF_F_GRO);
@@ -2624,7 +2661,6 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
 		netdev->do_ioctl = cxgb4vf_do_ioctl;
 		netdev->change_mtu = cxgb4vf_change_mtu;
 		netdev->set_mac_address = cxgb4vf_set_mac_addr;
-		netdev->select_queue = cxgb4vf_select_queue;
 #ifdef CONFIG_NET_POLL_CONTROLLER
 		netdev->poll_controller = cxgb4vf_poll_controller;
 #endif
@@ -2843,6 +2879,14 @@ static struct pci_device_id cxgb4vf_pci_tbl[] = {
 	CH_DEVICE(0x4800, 0),	/* T440-dbg */
 	CH_DEVICE(0x4801, 0),	/* T420-cr */
 	CH_DEVICE(0x4802, 0),	/* T422-cr */
+	CH_DEVICE(0x4803, 0),	/* T440-cr */
+	CH_DEVICE(0x4804, 0),	/* T420-bch */
+	CH_DEVICE(0x4805, 0),   /* T440-bch */
+	CH_DEVICE(0x4806, 0),	/* T460-ch */
+	CH_DEVICE(0x4807, 0),	/* T420-so */
+	CH_DEVICE(0x4808, 0),	/* T420-cx */
+	CH_DEVICE(0x4809, 0),	/* T420-bt */
+	CH_DEVICE(0x480a, 0),   /* T404-bt */
 	{ 0, }
 };
 
diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/cxgb4vf/sge.c
index f10864ddafb..e0b3d1bc2fd 100644
--- a/drivers/net/cxgb4vf/sge.c
+++ b/drivers/net/cxgb4vf/sge.c
@@ -154,13 +154,14 @@ enum {
 	 */
 	RX_COPY_THRES = 256,
 	RX_PULL_LEN = 128,
-};
 
-/*
- * Can't define this in the above enum because PKTSHIFT isn't a constant in
- * the VF Driver ...
- */
-#define RX_PKT_PULL_LEN (RX_PULL_LEN + PKTSHIFT)
+	/*
+	 * Main body length for sk_buffs used for RX Ethernet packets with
+	 * fragments.  Should be >= RX_PULL_LEN but possibly bigger to give
+	 * pskb_may_pull() some room.
+	 */
+	RX_SKB_LEN = 512,
+};
 
 /*
  * Software state per TX descriptor.
@@ -1355,6 +1356,67 @@ out_free:
 }
 
 /**
+ *	t4vf_pktgl_to_skb - build an sk_buff from a packet gather list
+ *	@gl: the gather list
+ *	@skb_len: size of sk_buff main body if it carries fragments
+ *	@pull_len: amount of data to move to the sk_buff's main body
+ *
+ *	Builds an sk_buff from the given packet gather list.  Returns the
+ *	sk_buff or %NULL if sk_buff allocation failed.
+ */
+struct sk_buff *t4vf_pktgl_to_skb(const struct pkt_gl *gl,
+				  unsigned int skb_len, unsigned int pull_len)
+{
+	struct sk_buff *skb;
+	struct skb_shared_info *ssi;
+
+	/*
+	 * If the ingress packet is small enough, allocate an skb large enough
+	 * for all of the data and copy it inline.  Otherwise, allocate an skb
+	 * with enough room to pull in the header and reference the rest of
+	 * the data via the skb fragment list.
+	 *
+	 * Below we rely on RX_COPY_THRES being less than the smallest Rx
+	 * buff!  size, which is expected since buffers are at least
+	 * PAGE_SIZEd.  In this case packets up to RX_COPY_THRES have only one
+	 * fragment.
+	 */
+	if (gl->tot_len <= RX_COPY_THRES) {
+		/* small packets have only one fragment */
+		skb = alloc_skb(gl->tot_len, GFP_ATOMIC);
+		if (unlikely(!skb))
+			goto out;
+		__skb_put(skb, gl->tot_len);
+		skb_copy_to_linear_data(skb, gl->va, gl->tot_len);
+	} else {
+		skb = alloc_skb(skb_len, GFP_ATOMIC);
+		if (unlikely(!skb))
+			goto out;
+		__skb_put(skb, pull_len);
+		skb_copy_to_linear_data(skb, gl->va, pull_len);
+
+		ssi = skb_shinfo(skb);
+		ssi->frags[0].page = gl->frags[0].page;
+		ssi->frags[0].page_offset = gl->frags[0].page_offset + pull_len;
+		ssi->frags[0].size = gl->frags[0].size - pull_len;
+		if (gl->nfrags > 1)
+			memcpy(&ssi->frags[1], &gl->frags[1],
+			       (gl->nfrags-1) * sizeof(skb_frag_t));
+		ssi->nr_frags = gl->nfrags;
+
+		skb->len = gl->tot_len;
+		skb->data_len = skb->len - pull_len;
+		skb->truesize += skb->data_len;
+
+		/* Get a reference for the last page, we don't own it */
+		get_page(gl->frags[gl->nfrags - 1].page);
+	}
+
+out:
+	return skb;
+}
+
+/**
  *	t4vf_pktgl_free - free a packet gather list
  *	@gl: the gather list
  *
@@ -1463,10 +1525,8 @@ int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp,
 {
 	struct sk_buff *skb;
 	struct port_info *pi;
-	struct skb_shared_info *ssi;
 	const struct cpl_rx_pkt *pkt = (void *)&rsp[1];
 	bool csum_ok = pkt->csum_calc && !pkt->err_vec;
-	unsigned int len = be16_to_cpu(pkt->len);
 	struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq);
 
 	/*
@@ -1481,42 +1541,14 @@ int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp,
 	}
 
 	/*
-	 * If the ingress packet is small enough, allocate an skb large enough
-	 * for all of the data and copy it inline.  Otherwise, allocate an skb
-	 * with enough room to pull in the header and reference the rest of
-	 * the data via the skb fragment list.
+	 * Convert the Packet Gather List into an skb.
 	 */
-	if (len <= RX_COPY_THRES) {
-		/* small packets have only one fragment */
-		skb = alloc_skb(gl->frags[0].size, GFP_ATOMIC);
-		if (!skb)
-			goto nomem;
-		__skb_put(skb, gl->frags[0].size);
-		skb_copy_to_linear_data(skb, gl->va, gl->frags[0].size);
-	} else {
-		skb = alloc_skb(RX_PKT_PULL_LEN, GFP_ATOMIC);
-		if (!skb)
-			goto nomem;
-		__skb_put(skb, RX_PKT_PULL_LEN);
-		skb_copy_to_linear_data(skb, gl->va, RX_PKT_PULL_LEN);
-
-		ssi = skb_shinfo(skb);
-		ssi->frags[0].page = gl->frags[0].page;
-		ssi->frags[0].page_offset = (gl->frags[0].page_offset +
-					     RX_PKT_PULL_LEN);
-		ssi->frags[0].size = gl->frags[0].size - RX_PKT_PULL_LEN;
-		if (gl->nfrags > 1)
-			memcpy(&ssi->frags[1], &gl->frags[1],
-			       (gl->nfrags-1) * sizeof(skb_frag_t));
-		ssi->nr_frags = gl->nfrags;
-		skb->len = len + PKTSHIFT;
-		skb->data_len = skb->len - RX_PKT_PULL_LEN;
-		skb->truesize += skb->data_len;
-
-		/* Get a reference for the last page, we don't own it */
-		get_page(gl->frags[gl->nfrags - 1].page);
+	skb = t4vf_pktgl_to_skb(gl, RX_SKB_LEN, RX_PULL_LEN);
+	if (unlikely(!skb)) {
+		t4vf_pktgl_free(gl);
+		rxq->stats.rx_drops++;
+		return 0;
 	}
-
 	__skb_pull(skb, PKTSHIFT);
 	skb->protocol = eth_type_trans(skb, rspq->netdev);
 	skb_record_rx_queue(skb, rspq->idx);
@@ -1536,6 +1568,9 @@ int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp,
 	} else
 		skb_checksum_none_assert(skb);
 
+	/*
+	 * Deliver the packet to the stack.
+	 */
 	if (unlikely(pkt->vlan_ex)) {
 		struct vlan_group *grp = pi->vlan_grp;
 
@@ -1549,11 +1584,6 @@ int t4vf_ethrx_handler(struct sge_rspq *rspq, const __be64 *rsp,
 		netif_receive_skb(skb);
 
 	return 0;
-
-nomem:
-	t4vf_pktgl_free(gl);
-	rxq->stats.rx_drops++;
-	return 0;
 }
 
 /**
@@ -1679,6 +1709,7 @@ int process_responses(struct sge_rspq *rspq, int budget)
 				}
 				len = RSPD_LEN(len);
 			}
+			gl.tot_len = len;
 
 			/*
 			 * Gather packet fragments.
@@ -2115,7 +2146,7 @@ int t4vf_sge_alloc_rxq(struct adapter *adapter, struct sge_rspq *rspq,
 
 		/*
 		 * Calculate the size of the hardware free list ring plus
-		 * status page (which the SGE will place at the end of the
+		 * Status Page (which the SGE will place after the end of the
 		 * free list ring) in Egress Queue Units.
 		 */
 		flsz = (fl->size / FL_PER_EQ_UNIT +
@@ -2212,8 +2243,8 @@ int t4vf_sge_alloc_eth_txq(struct adapter *adapter, struct sge_eth_txq *txq,
 	struct port_info *pi = netdev_priv(dev);
 
 	/*
-	 * Calculate the size of the hardware TX Queue (including the
-	 * status age on the end) in units of TX Descriptors.
+	 * Calculate the size of the hardware TX Queue (including the Status
+	 * Page on the end of the TX Queue) in units of TX Descriptors.
 	 */
 	nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
 
diff --git a/drivers/net/cxgb4vf/t4vf_common.h b/drivers/net/cxgb4vf/t4vf_common.h
index 873cb7d86c5..a65c80aed1f 100644
--- a/drivers/net/cxgb4vf/t4vf_common.h
+++ b/drivers/net/cxgb4vf/t4vf_common.h
@@ -235,6 +235,7 @@ static inline int t4vf_wr_mbox_ns(struct adapter *adapter, const void *cmd,
 int __devinit t4vf_wait_dev_ready(struct adapter *);
 int __devinit t4vf_port_init(struct adapter *, int);
 
+int t4vf_fw_reset(struct adapter *);
 int t4vf_query_params(struct adapter *, unsigned int, const u32 *, u32 *);
 int t4vf_set_params(struct adapter *, unsigned int, const u32 *, const u32 *);
 
diff --git a/drivers/net/cxgb4vf/t4vf_hw.c b/drivers/net/cxgb4vf/t4vf_hw.c
index ea1c123f0cb..e4bec78c8e3 100644
--- a/drivers/net/cxgb4vf/t4vf_hw.c
+++ b/drivers/net/cxgb4vf/t4vf_hw.c
@@ -116,7 +116,7 @@ static void dump_mbox(struct adapter *adapter, const char *tag, u32 mbox_data)
 int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size,
 		      void *rpl, bool sleep_ok)
 {
-	static int delay[] = {
+	static const int delay[] = {
 		1, 1, 3, 5, 10, 10, 20, 50, 100
 	};
 
@@ -326,6 +326,25 @@ int __devinit t4vf_port_init(struct adapter *adapter, int pidx)
 }
 
 /**
+ *      t4vf_fw_reset - issue a reset to FW
+ *      @adapter: the adapter
+ *
+ *	Issues a reset command to FW.  For a Physical Function this would
+ *	result in the Firmware reseting all of its state.  For a Virtual
+ *	Function this just resets the state associated with the VF.
+ */
+int t4vf_fw_reset(struct adapter *adapter)
+{
+	struct fw_reset_cmd cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.op_to_write = cpu_to_be32(FW_CMD_OP(FW_RESET_CMD) |
+				      FW_CMD_WRITE);
+	cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
+	return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
+}
+
+/**
  *	t4vf_query_params - query FW or device parameters
  *	@adapter: the adapter
  *	@nparams: the number of parameters
@@ -995,48 +1014,72 @@ int t4vf_alloc_mac_filt(struct adapter *adapter, unsigned int viid, bool free,
 			unsigned int naddr, const u8 **addr, u16 *idx,
 			u64 *hash, bool sleep_ok)
 {
-	int i, ret;
+	int offset, ret = 0;
+	unsigned nfilters = 0;
+	unsigned int rem = naddr;
 	struct fw_vi_mac_cmd cmd, rpl;
-	struct fw_vi_mac_exact *p;
-	size_t len16;
 
-	if (naddr > ARRAY_SIZE(cmd.u.exact))
+	if (naddr > FW_CLS_TCAM_NUM_ENTRIES)
 		return -EINVAL;
-	len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
-				      u.exact[naddr]), 16);
 
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
-				     FW_CMD_REQUEST |
-				     FW_CMD_WRITE |
-				     (free ? FW_CMD_EXEC : 0) |
-				     FW_VI_MAC_CMD_VIID(viid));
-	cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
-					    FW_CMD_LEN16(len16));
+	for (offset = 0; offset < naddr; /**/) {
+		unsigned int fw_naddr = (rem < ARRAY_SIZE(cmd.u.exact)
+					 ? rem
+					 : ARRAY_SIZE(cmd.u.exact));
+		size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
+						     u.exact[fw_naddr]), 16);
+		struct fw_vi_mac_exact *p;
+		int i;
+
+		memset(&cmd, 0, sizeof(cmd));
+		cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
+					     FW_CMD_REQUEST |
+					     FW_CMD_WRITE |
+					     (free ? FW_CMD_EXEC : 0) |
+					     FW_VI_MAC_CMD_VIID(viid));
+		cmd.freemacs_to_len16 =
+			cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
+				    FW_CMD_LEN16(len16));
+
+		for (i = 0, p = cmd.u.exact; i < fw_naddr; i++, p++) {
+			p->valid_to_idx = cpu_to_be16(
+				FW_VI_MAC_CMD_VALID |
+				FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
+			memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr));
+		}
 
-	for (i = 0, p = cmd.u.exact; i < naddr; i++, p++) {
-		p->valid_to_idx =
-			cpu_to_be16(FW_VI_MAC_CMD_VALID |
-				    FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
-		memcpy(p->macaddr, addr[i], sizeof(p->macaddr));
-	}
 
-	ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl, sleep_ok);
-	if (ret)
-		return ret;
-
-	for (i = 0, p = rpl.u.exact; i < naddr; i++, p++) {
-		u16 index = FW_VI_MAC_CMD_IDX_GET(be16_to_cpu(p->valid_to_idx));
-
-		if (idx)
-			idx[i] = (index >= FW_CLS_TCAM_NUM_ENTRIES
-				  ? 0xffff
-				  : index);
-		if (index < FW_CLS_TCAM_NUM_ENTRIES)
-			ret++;
-		else if (hash)
-			*hash |= (1 << hash_mac_addr(addr[i]));
+		ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl,
+					sleep_ok);
+		if (ret && ret != -ENOMEM)
+			break;
+
+		for (i = 0, p = rpl.u.exact; i < fw_naddr; i++, p++) {
+			u16 index = FW_VI_MAC_CMD_IDX_GET(
+				be16_to_cpu(p->valid_to_idx));
+
+			if (idx)
+				idx[offset+i] =
+					(index >= FW_CLS_TCAM_NUM_ENTRIES
+					 ? 0xffff
+					 : index);
+			if (index < FW_CLS_TCAM_NUM_ENTRIES)
+				nfilters++;
+			else if (hash)
+				*hash |= (1ULL << hash_mac_addr(addr[offset+i]));
+		}
+
+		free = false;
+		offset += fw_naddr;
+		rem -= fw_naddr;
 	}
+
+	/*
+	 * If there were no errors or we merely ran out of room in our MAC
+	 * address arena, return the number of filters actually written.
+	 */
+	if (ret == 0 || ret == -ENOMEM)
+		ret = nfilters;
 	return ret;
 }
 
@@ -1257,7 +1300,7 @@ int t4vf_eth_eq_free(struct adapter *adapter, unsigned int eqid)
  */
 int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl)
 {
-	struct fw_cmd_hdr *cmd_hdr = (struct fw_cmd_hdr *)rpl;
+	const struct fw_cmd_hdr *cmd_hdr = (const struct fw_cmd_hdr *)rpl;
 	u8 opcode = FW_CMD_OP_GET(be32_to_cpu(cmd_hdr->hi));
 
 	switch (opcode) {
@@ -1265,7 +1308,8 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl)
 		/*
 		 * Link/module state change message.
 		 */
-		const struct fw_port_cmd *port_cmd = (void *)rpl;
+		const struct fw_port_cmd *port_cmd =
+			(const struct fw_port_cmd *)rpl;
 		u32 word;
 		int action, port_id, link_ok, speed, fc, pidx;
 
diff --git a/drivers/net/depca.c b/drivers/net/depca.c
index 91b3846ffc8..1b48b68ad4f 100644
--- a/drivers/net/depca.c
+++ b/drivers/net/depca.c
@@ -1513,7 +1513,7 @@ static enum depca_type __init depca_shmem_probe (ulong *mem_start)
 	return adapter;
 }
 
-static int __init depca_isa_probe (struct platform_device *device)
+static int __devinit depca_isa_probe (struct platform_device *device)
 {
 	struct net_device *dev;
 	struct depca_private *lp;
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index 9f6aeefa06b..2d4c4fc1d90 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -1675,7 +1675,7 @@ dm9000_drv_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 
 	unregister_netdev(ndev);
-	dm9000_release_board(pdev, (board_info_t *) netdev_priv(ndev));
+	dm9000_release_board(pdev, netdev_priv(ndev));
 	free_netdev(ndev);		/* free device structure */
 
 	dev_dbg(&pdev->dev, "released and freed device\n");
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index c7e242b69a1..77d08e697b7 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -4892,11 +4892,11 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
 	} else if (hw->phy_type == e1000_phy_igp) {	/* For IGP PHY */
 		u16 cur_agc_value;
 		u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
-		u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
-		    { IGP01E1000_PHY_AGC_A,
-			IGP01E1000_PHY_AGC_B,
-			IGP01E1000_PHY_AGC_C,
-			IGP01E1000_PHY_AGC_D
+		static const u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
+		       IGP01E1000_PHY_AGC_A,
+		       IGP01E1000_PHY_AGC_B,
+		       IGP01E1000_PHY_AGC_C,
+		       IGP01E1000_PHY_AGC_D
 		};
 		/* Read the AGC registers for all channels */
 		for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
@@ -5071,11 +5071,11 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
 {
 	s32 ret_val;
 	u16 phy_data, phy_saved_data, speed, duplex, i;
-	u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
-	    { IGP01E1000_PHY_AGC_PARAM_A,
-		IGP01E1000_PHY_AGC_PARAM_B,
-		IGP01E1000_PHY_AGC_PARAM_C,
-		IGP01E1000_PHY_AGC_PARAM_D
+	static const u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
+	       IGP01E1000_PHY_AGC_PARAM_A,
+	       IGP01E1000_PHY_AGC_PARAM_B,
+	       IGP01E1000_PHY_AGC_PARAM_C,
+	       IGP01E1000_PHY_AGC_PARAM_D
 	};
 	u16 min_length, max_length;
 
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 4686c3983fc..340e12d2e4a 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -31,7 +31,7 @@
 
 char e1000_driver_name[] = "e1000";
 static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#define DRV_VERSION "7.3.21-k6-NAPI"
+#define DRV_VERSION "7.3.21-k8-NAPI"
 const char e1000_driver_version[] = DRV_VERSION;
 static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
 
@@ -485,9 +485,6 @@ void e1000_down(struct e1000_adapter *adapter)
 	struct net_device *netdev = adapter->netdev;
 	u32 rctl, tctl;
 
-	/* signal that we're down so the interrupt handler does not
-	 * reschedule our watchdog timer */
-	set_bit(__E1000_DOWN, &adapter->flags);
 
 	/* disable receives in the hardware */
 	rctl = er32(RCTL);
@@ -508,6 +505,13 @@ void e1000_down(struct e1000_adapter *adapter)
 
 	e1000_irq_disable(adapter);
 
+	/*
+	 * Setting DOWN must be after irq_disable to prevent
+	 * a screaming interrupt.  Setting DOWN also prevents
+	 * timers and tasks from rescheduling.
+	 */
+	set_bit(__E1000_DOWN, &adapter->flags);
+
 	del_timer_sync(&adapter->tx_fifo_stall_timer);
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_info_timer);
@@ -967,11 +971,13 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 		 */
 		dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
 		pci_using_dac = 1;
-	} else if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
-		dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	} else {
-		pr_err("No usable DMA config, aborting\n");
-		goto err_dma;
+		err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+		if (err) {
+			pr_err("No usable DMA config, aborting\n");
+			goto err_dma;
+		}
+		dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	}
 
 	netdev->netdev_ops = &e1000_netdev_ops;
@@ -1425,13 +1431,12 @@ static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
 	int size;
 
 	size = sizeof(struct e1000_buffer) * txdr->count;
-	txdr->buffer_info = vmalloc(size);
+	txdr->buffer_info = vzalloc(size);
 	if (!txdr->buffer_info) {
 		e_err(probe, "Unable to allocate memory for the Tx descriptor "
 		      "ring\n");
 		return -ENOMEM;
 	}
-	memset(txdr->buffer_info, 0, size);
 
 	/* round up to nearest 4K */
 
@@ -1621,13 +1626,12 @@ static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
 	int size, desc_len;
 
 	size = sizeof(struct e1000_buffer) * rxdr->count;
-	rxdr->buffer_info = vmalloc(size);
+	rxdr->buffer_info = vzalloc(size);
 	if (!rxdr->buffer_info) {
 		e_err(probe, "Unable to allocate memory for the Rx descriptor "
 		      "ring\n");
 		return -ENOMEM;
 	}
-	memset(rxdr->buffer_info, 0, size);
 
 	desc_len = sizeof(struct e1000_rx_desc);
 
@@ -2722,7 +2726,7 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter,
 		break;
 	}
 
-	css = skb_transport_offset(skb);
+	css = skb_checksum_start_offset(skb);
 
 	i = tx_ring->next_to_use;
 	buffer_info = &tx_ring->buffer_info[i];
diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index 10d8d98bb79..1301eba8b57 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -352,12 +352,13 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 	}
 	{ /* Flow Control */
 
-		struct e1000_opt_list fc_list[] =
-			{{ E1000_FC_NONE,    "Flow Control Disabled" },
-			 { E1000_FC_RX_PAUSE,"Flow Control Receive Only" },
-			 { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" },
-			 { E1000_FC_FULL,    "Flow Control Enabled" },
-			 { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
+		static const struct e1000_opt_list fc_list[] = {
+		       { E1000_FC_NONE, "Flow Control Disabled" },
+		       { E1000_FC_RX_PAUSE, "Flow Control Receive Only" },
+		       { E1000_FC_TX_PAUSE, "Flow Control Transmit Only" },
+		       { E1000_FC_FULL, "Flow Control Enabled" },
+		       { E1000_FC_DEFAULT, "Flow Control Hardware Default" }
+		};
 
 		opt = (struct e1000_option) {
 			.type = list_option,
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 7236f1a53ba..e57e4097ef1 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -52,6 +52,7 @@
 			      (ID_LED_DEF1_DEF2))
 
 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
+#define AN_RETRY_COUNT          5 /* Autoneg Retry Count value */
 #define E1000_BASE1000T_STATUS          10
 #define E1000_IDLE_ERROR_COUNT_MASK     0xFF
 #define E1000_RECEIVE_ERROR_COUNTER     21
@@ -74,6 +75,9 @@ static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
 static s32 e1000_led_on_82574(struct e1000_hw *hw);
 static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
 static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
+static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
 
 /**
  *  e1000_init_phy_params_82571 - Init PHY func ptrs.
@@ -107,6 +111,8 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
 	case e1000_82574:
 	case e1000_82583:
 		phy->type		 = e1000_phy_bm;
+		phy->ops.acquire = e1000_get_hw_semaphore_82574;
+		phy->ops.release = e1000_put_hw_semaphore_82574;
 		break;
 	default:
 		return -E1000_ERR_PHY;
@@ -200,6 +206,17 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
 		break;
 	}
 
+	/* Function Pointers */
+	switch (hw->mac.type) {
+	case e1000_82574:
+	case e1000_82583:
+		nvm->ops.acquire = e1000_get_hw_semaphore_82574;
+		nvm->ops.release = e1000_put_hw_semaphore_82574;
+		break;
+	default:
+		break;
+	}
+
 	return 0;
 }
 
@@ -542,6 +559,94 @@ static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
 	swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
 	ew32(SWSM, swsm);
 }
+/**
+ *  e1000_get_hw_semaphore_82573 - Acquire hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the HW semaphore during reset.
+ *
+ **/
+static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
+{
+	u32 extcnf_ctrl;
+	s32 ret_val = 0;
+	s32 i = 0;
+
+	extcnf_ctrl = er32(EXTCNF_CTRL);
+	extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+	do {
+		ew32(EXTCNF_CTRL, extcnf_ctrl);
+		extcnf_ctrl = er32(EXTCNF_CTRL);
+
+		if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
+			break;
+
+		extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+		msleep(2);
+		i++;
+	} while (i < MDIO_OWNERSHIP_TIMEOUT);
+
+	if (i == MDIO_OWNERSHIP_TIMEOUT) {
+		/* Release semaphores */
+		e1000_put_hw_semaphore_82573(hw);
+		e_dbg("Driver can't access the PHY\n");
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
+out:
+	return ret_val;
+}
+
+/**
+ *  e1000_put_hw_semaphore_82573 - Release hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Release hardware semaphore used during reset.
+ *
+ **/
+static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw)
+{
+	u32 extcnf_ctrl;
+
+	extcnf_ctrl = er32(EXTCNF_CTRL);
+	extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+	ew32(EXTCNF_CTRL, extcnf_ctrl);
+}
+
+static DEFINE_MUTEX(swflag_mutex);
+
+/**
+ *  e1000_get_hw_semaphore_82574 - Acquire hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Acquire the HW semaphore to access the PHY or NVM.
+ *
+ **/
+static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw)
+{
+	s32 ret_val;
+
+	mutex_lock(&swflag_mutex);
+	ret_val = e1000_get_hw_semaphore_82573(hw);
+	if (ret_val)
+		mutex_unlock(&swflag_mutex);
+	return ret_val;
+}
+
+/**
+ *  e1000_put_hw_semaphore_82574 - Release hardware semaphore
+ *  @hw: pointer to the HW structure
+ *
+ *  Release hardware semaphore used to access the PHY or NVM
+ *
+ **/
+static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
+{
+	e1000_put_hw_semaphore_82573(hw);
+	mutex_unlock(&swflag_mutex);
+}
 
 /**
  *  e1000_acquire_nvm_82571 - Request for access to the EEPROM
@@ -562,8 +667,6 @@ static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
 
 	switch (hw->mac.type) {
 	case e1000_82573:
-	case e1000_82574:
-	case e1000_82583:
 		break;
 	default:
 		ret_val = e1000e_acquire_nvm(hw);
@@ -853,9 +956,8 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
  **/
 static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 {
-	u32 ctrl, extcnf_ctrl, ctrl_ext, icr;
+	u32 ctrl, ctrl_ext, icr;
 	s32 ret_val;
-	u16 i = 0;
 
 	/*
 	 * Prevent the PCI-E bus from sticking if there is no TLP connection
@@ -880,33 +982,33 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 	 */
 	switch (hw->mac.type) {
 	case e1000_82573:
+		ret_val = e1000_get_hw_semaphore_82573(hw);
+		break;
 	case e1000_82574:
 	case e1000_82583:
-		extcnf_ctrl = er32(EXTCNF_CTRL);
-		extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
-
-		do {
-			ew32(EXTCNF_CTRL, extcnf_ctrl);
-			extcnf_ctrl = er32(EXTCNF_CTRL);
-
-			if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
-				break;
-
-			extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
-
-			msleep(2);
-			i++;
-		} while (i < MDIO_OWNERSHIP_TIMEOUT);
+		ret_val = e1000_get_hw_semaphore_82574(hw);
 		break;
 	default:
 		break;
 	}
+	if (ret_val)
+		e_dbg("Cannot acquire MDIO ownership\n");
 
 	ctrl = er32(CTRL);
 
 	e_dbg("Issuing a global reset to MAC\n");
 	ew32(CTRL, ctrl | E1000_CTRL_RST);
 
+	/* Must release MDIO ownership and mutex after MAC reset. */
+	switch (hw->mac.type) {
+	case e1000_82574:
+	case e1000_82583:
+		e1000_put_hw_semaphore_82574(hw);
+		break;
+	default:
+		break;
+	}
+
 	if (hw->nvm.type == e1000_nvm_flash_hw) {
 		udelay(10);
 		ctrl_ext = er32(CTRL_EXT);
@@ -1402,6 +1504,8 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 	u32 rxcw;
 	u32 ctrl;
 	u32 status;
+	u32 txcw;
+	u32 i;
 	s32 ret_val = 0;
 
 	ctrl = er32(CTRL);
@@ -1422,8 +1526,10 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				    e1000_serdes_link_autoneg_progress;
 				mac->serdes_has_link = false;
 				e_dbg("AN_UP     -> AN_PROG\n");
+			} else {
+				mac->serdes_has_link = true;
 			}
-		break;
+			break;
 
 		case e1000_serdes_link_forced_up:
 			/*
@@ -1431,8 +1537,10 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			 * auto-negotiation in the TXCW register and disable
 			 * forced link in the Device Control register in an
 			 * attempt to auto-negotiate with our link partner.
+			 * If the partner code word is null, stop forcing
+			 * and restart auto negotiation.
 			 */
-			if (rxcw & E1000_RXCW_C) {
+			if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW))  {
 				/* Enable autoneg, and unforce link up */
 				ew32(TXCW, mac->txcw);
 				ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
@@ -1440,6 +1548,8 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 				    e1000_serdes_link_autoneg_progress;
 				mac->serdes_has_link = false;
 				e_dbg("FORCED_UP -> AN_PROG\n");
+			} else {
+				mac->serdes_has_link = true;
 			}
 			break;
 
@@ -1495,6 +1605,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
 			mac->serdes_link_state =
 			    e1000_serdes_link_autoneg_progress;
+			mac->serdes_has_link = false;
 			e_dbg("DOWN      -> AN_PROG\n");
 			break;
 		}
@@ -1505,16 +1616,32 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			e_dbg("ANYSTATE  -> DOWN\n");
 		} else {
 			/*
-			 * We have sync, and can tolerate one invalid (IV)
-			 * codeword before declaring link down, so reread
-			 * to look again.
+			 * Check several times, if Sync and Config
+			 * both are consistently 1 then simply ignore
+			 * the Invalid bit and restart Autoneg
 			 */
-			udelay(10);
-			rxcw = er32(RXCW);
-			if (rxcw & E1000_RXCW_IV) {
-				mac->serdes_link_state = e1000_serdes_link_down;
+			for (i = 0; i < AN_RETRY_COUNT; i++) {
+				udelay(10);
+				rxcw = er32(RXCW);
+				if ((rxcw & E1000_RXCW_IV) &&
+				    !((rxcw & E1000_RXCW_SYNCH) &&
+				      (rxcw & E1000_RXCW_C))) {
+					mac->serdes_has_link = false;
+					mac->serdes_link_state =
+					    e1000_serdes_link_down;
+					e_dbg("ANYSTATE  -> DOWN\n");
+					break;
+				}
+			}
+
+			if (i == AN_RETRY_COUNT) {
+				txcw = er32(TXCW);
+				txcw |= E1000_TXCW_ANE;
+				ew32(TXCW, txcw);
+				mac->serdes_link_state =
+				    e1000_serdes_link_autoneg_progress;
 				mac->serdes_has_link = false;
-				e_dbg("ANYSTATE  -> DOWN\n");
+				e_dbg("ANYSTATE  -> AN_PROG\n");
 			}
 		}
 	}
@@ -1897,7 +2024,7 @@ struct e1000_info e1000_82574_info = {
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
 	.flags2			  = FLAG2_CHECK_PHY_HANG,
-	.pba			= 36,
+	.pba			= 32,
 	.max_hw_frame_size	= DEFAULT_JUMBO,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
@@ -1914,7 +2041,7 @@ struct e1000_info e1000_82583_info = {
 				  | FLAG_HAS_SMART_POWER_DOWN
 				  | FLAG_HAS_AMT
 				  | FLAG_HAS_CTRLEXT_ON_LOAD,
-	.pba			= 36,
+	.pba			= 32,
 	.max_hw_frame_size	= ETH_FRAME_LEN + ETH_FCS_LEN,
 	.get_variants		= e1000_get_variants_82571,
 	.mac_ops		= &e82571_mac_ops,
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index d3f7a9c3f97..7245dc2e0b7 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -488,6 +488,9 @@
 #define E1000_BLK_PHY_RESET   12
 #define E1000_ERR_SWFW_SYNC 13
 #define E1000_NOT_IMPLEMENTED 14
+#define E1000_ERR_INVALID_ARGUMENT  16
+#define E1000_ERR_NO_SPACE          17
+#define E1000_ERR_NVM_PBA_SECTION   18
 
 /* Loop limit on how long we wait for auto-negotiation to complete */
 #define FIBER_LINK_UP_LIMIT               50
@@ -516,6 +519,7 @@
 #define E1000_TXCW_ANE        0x80000000        /* Auto-neg enable */
 
 /* Receive Configuration Word */
+#define E1000_RXCW_CW         0x0000ffff        /* RxConfigWord mask */
 #define E1000_RXCW_IV         0x08000000        /* Receive config invalid */
 #define E1000_RXCW_C          0x20000000        /* Receive config */
 #define E1000_RXCW_SYNCH      0x40000000        /* Receive config synch */
@@ -649,13 +653,16 @@
 /* Mask bits for fields in Word 0x03 of the EEPROM */
 #define NVM_COMPAT_LOM    0x0800
 
+/* length of string needed to store PBA number */
+#define E1000_PBANUM_LENGTH             11
+
 /* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
 #define NVM_SUM                    0xBABA
 
 /* PBA (printed board assembly) number words */
 #define NVM_PBA_OFFSET_0           8
 #define NVM_PBA_OFFSET_1           9
-
+#define NVM_PBA_PTR_GUARD          0xFAFA
 #define NVM_WORD_SIZE_BASE_SHIFT   6
 
 /* NVM Commands - SPI */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index fdc67fead4e..2c913b8e911 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -482,6 +482,7 @@ extern const char e1000e_driver_version[];
 
 extern void e1000e_check_options(struct e1000_adapter *adapter);
 extern void e1000e_set_ethtool_ops(struct net_device *netdev);
+extern void e1000e_led_blink_task(struct work_struct *work);
 
 extern int e1000e_up(struct e1000_adapter *adapter);
 extern void e1000e_down(struct e1000_adapter *adapter);
@@ -513,7 +514,8 @@ extern struct e1000_info e1000_pch_info;
 extern struct e1000_info e1000_pch2_info;
 extern struct e1000_info e1000_es2_info;
 
-extern s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num);
+extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+					 u32 pba_num_size);
 
 extern s32  e1000e_commit_phy(struct e1000_hw *hw);
 
diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c
index 24f8ac9cf70..b18c644e13d 100644
--- a/drivers/net/e1000e/es2lan.c
+++ b/drivers/net/e1000e/es2lan.c
@@ -100,8 +100,8 @@
  * with a lower bound at "index" and the upper bound at
  * "index + 5".
  */
-static const u16 e1000_gg82563_cable_length_table[] =
-	 { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
+static const u16 e1000_gg82563_cable_length_table[] = {
+	 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
 #define GG82563_CABLE_LENGTH_TABLE_SIZE \
 		ARRAY_SIZE(e1000_gg82563_cable_length_table)
 
@@ -426,8 +426,8 @@ static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
 {
 	u32 swfw_sync;
 
-	while (e1000e_get_hw_semaphore(hw) != 0);
-	/* Empty */
+	while (e1000e_get_hw_semaphore(hw) != 0)
+		; /* Empty */
 
 	swfw_sync = er32(SW_FW_SYNC);
 	swfw_sync &= ~mask;
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 8984d165a39..affcacf6f5a 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -45,63 +45,67 @@ struct e1000_stats {
 	int stat_offset;
 };
 
-#define E1000_STAT(m)		E1000_STATS, \
-				sizeof(((struct e1000_adapter *)0)->m), \
-		      		offsetof(struct e1000_adapter, m)
-#define E1000_NETDEV_STAT(m)	NETDEV_STATS, \
-				sizeof(((struct net_device *)0)->m), \
-				offsetof(struct net_device, m)
+#define E1000_STAT(str, m) { \
+			.stat_string = str, \
+			.type = E1000_STATS, \
+			.sizeof_stat = sizeof(((struct e1000_adapter *)0)->m), \
+			.stat_offset = offsetof(struct e1000_adapter, m) }
+#define E1000_NETDEV_STAT(str, m) { \
+			.stat_string = str, \
+			.type = NETDEV_STATS, \
+			.sizeof_stat = sizeof(((struct net_device *)0)->m), \
+			.stat_offset = offsetof(struct net_device, m) }
 
 static const struct e1000_stats e1000_gstrings_stats[] = {
-	{ "rx_packets", E1000_STAT(stats.gprc) },
-	{ "tx_packets", E1000_STAT(stats.gptc) },
-	{ "rx_bytes", E1000_STAT(stats.gorc) },
-	{ "tx_bytes", E1000_STAT(stats.gotc) },
-	{ "rx_broadcast", E1000_STAT(stats.bprc) },
-	{ "tx_broadcast", E1000_STAT(stats.bptc) },
-	{ "rx_multicast", E1000_STAT(stats.mprc) },
-	{ "tx_multicast", E1000_STAT(stats.mptc) },
-	{ "rx_errors", E1000_NETDEV_STAT(stats.rx_errors) },
-	{ "tx_errors", E1000_NETDEV_STAT(stats.tx_errors) },
-	{ "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
-	{ "multicast", E1000_STAT(stats.mprc) },
-	{ "collisions", E1000_STAT(stats.colc) },
-	{ "rx_length_errors", E1000_NETDEV_STAT(stats.rx_length_errors) },
-	{ "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
-	{ "rx_crc_errors", E1000_STAT(stats.crcerrs) },
-	{ "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
-	{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
-	{ "rx_missed_errors", E1000_STAT(stats.mpc) },
-	{ "tx_aborted_errors", E1000_STAT(stats.ecol) },
-	{ "tx_carrier_errors", E1000_STAT(stats.tncrs) },
-	{ "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
-	{ "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
-	{ "tx_window_errors", E1000_STAT(stats.latecol) },
-	{ "tx_abort_late_coll", E1000_STAT(stats.latecol) },
-	{ "tx_deferred_ok", E1000_STAT(stats.dc) },
-	{ "tx_single_coll_ok", E1000_STAT(stats.scc) },
-	{ "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
-	{ "tx_timeout_count", E1000_STAT(tx_timeout_count) },
-	{ "tx_restart_queue", E1000_STAT(restart_queue) },
-	{ "rx_long_length_errors", E1000_STAT(stats.roc) },
-	{ "rx_short_length_errors", E1000_STAT(stats.ruc) },
-	{ "rx_align_errors", E1000_STAT(stats.algnerrc) },
-	{ "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
-	{ "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
-	{ "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
-	{ "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
-	{ "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
-	{ "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
-	{ "rx_long_byte_count", E1000_STAT(stats.gorc) },
-	{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
-	{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
-	{ "rx_header_split", E1000_STAT(rx_hdr_split) },
-	{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
-	{ "tx_smbus", E1000_STAT(stats.mgptc) },
-	{ "rx_smbus", E1000_STAT(stats.mgprc) },
-	{ "dropped_smbus", E1000_STAT(stats.mgpdc) },
-	{ "rx_dma_failed", E1000_STAT(rx_dma_failed) },
-	{ "tx_dma_failed", E1000_STAT(tx_dma_failed) },
+	E1000_STAT("rx_packets", stats.gprc),
+	E1000_STAT("tx_packets", stats.gptc),
+	E1000_STAT("rx_bytes", stats.gorc),
+	E1000_STAT("tx_bytes", stats.gotc),
+	E1000_STAT("rx_broadcast", stats.bprc),
+	E1000_STAT("tx_broadcast", stats.bptc),
+	E1000_STAT("rx_multicast", stats.mprc),
+	E1000_STAT("tx_multicast", stats.mptc),
+	E1000_NETDEV_STAT("rx_errors", stats.rx_errors),
+	E1000_NETDEV_STAT("tx_errors", stats.tx_errors),
+	E1000_NETDEV_STAT("tx_dropped", stats.tx_dropped),
+	E1000_STAT("multicast", stats.mprc),
+	E1000_STAT("collisions", stats.colc),
+	E1000_NETDEV_STAT("rx_length_errors", stats.rx_length_errors),
+	E1000_NETDEV_STAT("rx_over_errors", stats.rx_over_errors),
+	E1000_STAT("rx_crc_errors", stats.crcerrs),
+	E1000_NETDEV_STAT("rx_frame_errors", stats.rx_frame_errors),
+	E1000_STAT("rx_no_buffer_count", stats.rnbc),
+	E1000_STAT("rx_missed_errors", stats.mpc),
+	E1000_STAT("tx_aborted_errors", stats.ecol),
+	E1000_STAT("tx_carrier_errors", stats.tncrs),
+	E1000_NETDEV_STAT("tx_fifo_errors", stats.tx_fifo_errors),
+	E1000_NETDEV_STAT("tx_heartbeat_errors", stats.tx_heartbeat_errors),
+	E1000_STAT("tx_window_errors", stats.latecol),
+	E1000_STAT("tx_abort_late_coll", stats.latecol),
+	E1000_STAT("tx_deferred_ok", stats.dc),
+	E1000_STAT("tx_single_coll_ok", stats.scc),
+	E1000_STAT("tx_multi_coll_ok", stats.mcc),
+	E1000_STAT("tx_timeout_count", tx_timeout_count),
+	E1000_STAT("tx_restart_queue", restart_queue),
+	E1000_STAT("rx_long_length_errors", stats.roc),
+	E1000_STAT("rx_short_length_errors", stats.ruc),
+	E1000_STAT("rx_align_errors", stats.algnerrc),
+	E1000_STAT("tx_tcp_seg_good", stats.tsctc),
+	E1000_STAT("tx_tcp_seg_failed", stats.tsctfc),
+	E1000_STAT("rx_flow_control_xon", stats.xonrxc),
+	E1000_STAT("rx_flow_control_xoff", stats.xoffrxc),
+	E1000_STAT("tx_flow_control_xon", stats.xontxc),
+	E1000_STAT("tx_flow_control_xoff", stats.xofftxc),
+	E1000_STAT("rx_long_byte_count", stats.gorc),
+	E1000_STAT("rx_csum_offload_good", hw_csum_good),
+	E1000_STAT("rx_csum_offload_errors", hw_csum_err),
+	E1000_STAT("rx_header_split", rx_hdr_split),
+	E1000_STAT("alloc_rx_buff_failed", alloc_rx_buff_failed),
+	E1000_STAT("tx_smbus", stats.mgptc),
+	E1000_STAT("rx_smbus", stats.mgprc),
+	E1000_STAT("dropped_smbus", stats.mgpdc),
+	E1000_STAT("rx_dma_failed", rx_dma_failed),
+	E1000_STAT("tx_dma_failed", tx_dma_failed),
 };
 
 #define E1000_GLOBAL_STATS_LEN	ARRAY_SIZE(e1000_gstrings_stats)
@@ -194,20 +198,6 @@ static int e1000_get_settings(struct net_device *netdev,
 	return 0;
 }
 
-static u32 e1000_get_link(struct net_device *netdev)
-{
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
-
-	/*
-	 * Avoid touching hardware registers when possible, otherwise
-	 * link negotiation can get messed up when user-level scripts
-	 * are rapidly polling the driver to see if link is up.
-	 */
-	return netif_running(netdev) ? netif_carrier_ok(netdev) :
-	    !!(er32(STATUS) & E1000_STATUS_LU);
-}
-
 static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
 {
 	struct e1000_mac_info *mac = &adapter->hw.mac;
@@ -763,8 +753,8 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
 			     int reg, int offset, u32 mask, u32 write)
 {
 	u32 pat, val;
-	static const u32 test[] =
-		{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+	static const u32 test[] = {
+		0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
 	for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
 		E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
 				      (test[pat] & write));
@@ -1263,6 +1253,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 	u32 ctrl_reg = 0;
 	u32 stat_reg = 0;
 	u16 phy_reg = 0;
+	s32 ret_val = 0;
 
 	hw->mac.autoneg = 0;
 
@@ -1322,7 +1313,13 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 	case e1000_phy_82577:
 	case e1000_phy_82578:
 		/* Workaround: K1 must be disabled for stable 1Gbps operation */
+		ret_val = hw->phy.ops.acquire(hw);
+		if (ret_val) {
+			e_err("Cannot setup 1Gbps loopback.\n");
+			return ret_val;
+		}
 		e1000_configure_k1_ich8lan(hw, false);
+		hw->phy.ops.release(hw);
 		break;
 	case e1000_phy_82579:
 		/* Disable PHY energy detect power down */
@@ -1860,7 +1857,7 @@ static int e1000_set_wol(struct net_device *netdev,
 /* bit defines for adapter->led_status */
 #define E1000_LED_ON		0
 
-static void e1000e_led_blink_task(struct work_struct *work)
+void e1000e_led_blink_task(struct work_struct *work)
 {
 	struct e1000_adapter *adapter = container_of(work,
 	                                struct e1000_adapter, led_blink_task);
@@ -1892,7 +1889,6 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
 	    (hw->mac.type == e1000_pch2lan) ||
 	    (hw->mac.type == e1000_82583) ||
 	    (hw->mac.type == e1000_82574)) {
-		INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
 		if (!adapter->blink_timer.function) {
 			init_timer(&adapter->blink_timer);
 			adapter->blink_timer.function =
@@ -1986,6 +1982,9 @@ static void e1000_get_ethtool_stats(struct net_device *netdev,
 			p = (char *) adapter +
 					e1000_gstrings_stats[i].stat_offset;
 			break;
+		default:
+			data[i] = 0;
+			continue;
 		}
 
 		data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
@@ -2024,7 +2023,7 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_msglevel		= e1000_get_msglevel,
 	.set_msglevel		= e1000_set_msglevel,
 	.nway_reset		= e1000_nway_reset,
-	.get_link		= e1000_get_link,
+	.get_link		= ethtool_op_get_link,
 	.get_eeprom_len		= e1000_get_eeprom_len,
 	.get_eeprom		= e1000_get_eeprom,
 	.set_eeprom		= e1000_set_eeprom,
diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index e3374d9a247..d86cc083272 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -338,12 +338,17 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 	}
 
 	phy->id = e1000_phy_unknown;
-	ret_val = e1000e_get_phy_id(hw);
-	if (ret_val)
-		goto out;
-	if ((phy->id == 0) || (phy->id == PHY_REVISION_MASK)) {
+	switch (hw->mac.type) {
+	default:
+		ret_val = e1000e_get_phy_id(hw);
+		if (ret_val)
+			goto out;
+		if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+			break;
+		/* fall-through */
+	case e1000_pch2lan:
 		/*
-		 * In case the PHY needs to be in mdio slow mode (eg. 82577),
+		 * In case the PHY needs to be in mdio slow mode,
 		 * set slow mode and try to get the PHY id again.
 		 */
 		ret_val = e1000_set_mdio_slow_mode_hv(hw);
@@ -352,6 +357,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
 		ret_val = e1000e_get_phy_id(hw);
 		if (ret_val)
 			goto out;
+		break;
 	}
 	phy->type = e1000e_get_phy_type_from_id(phy->id);
 
@@ -2303,11 +2309,10 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
 		 */
 		if (ret_val == 0) {
 			flash_data = er32flash(ICH_FLASH_FDATA0);
-			if (size == 1) {
+			if (size == 1)
 				*data = (u8)(flash_data & 0x000000FF);
-			} else if (size == 2) {
+			else if (size == 2)
 				*data = (u16)(flash_data & 0x0000FFFF);
-			}
 			break;
 		} else {
 			/*
@@ -3591,7 +3596,7 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw)
 	ew32(PHY_CTRL, phy_ctrl);
 
 	if (hw->mac.type >= e1000_pchlan) {
-		e1000_oem_bits_config_ich8lan(hw, true);
+		e1000_oem_bits_config_ich8lan(hw, false);
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			return;
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 0fd4eb5ac5f..7e55170a601 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -493,9 +493,8 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 	 * different link partner.
 	 */
 	ret_val = e1000e_config_fc_after_link_up(hw);
-	if (ret_val) {
+	if (ret_val)
 		e_dbg("Error configuring flow control\n");
-	}
 
 	return ret_val;
 }
@@ -1496,9 +1495,8 @@ s32 e1000e_setup_led_generic(struct e1000_hw *hw)
 {
 	u32 ledctl;
 
-	if (hw->mac.ops.setup_led != e1000e_setup_led_generic) {
+	if (hw->mac.ops.setup_led != e1000e_setup_led_generic)
 		return -E1000_ERR_CONFIG;
-	}
 
 	if (hw->phy.media_type == e1000_media_type_fiber) {
 		ledctl = er32(LEDCTL);
@@ -2139,6 +2137,119 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
 }
 
 /**
+ *  e1000_read_pba_string_generic - Read device part number
+ *  @hw: pointer to the HW structure
+ *  @pba_num: pointer to device part number
+ *  @pba_num_size: size of part number buffer
+ *
+ *  Reads the product board assembly (PBA) number from the EEPROM and stores
+ *  the value in pba_num.
+ **/
+s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+				  u32 pba_num_size)
+{
+	s32 ret_val;
+	u16 nvm_data;
+	u16 pba_ptr;
+	u16 offset;
+	u16 length;
+
+	if (pba_num == NULL) {
+		e_dbg("PBA string buffer was null\n");
+		ret_val = E1000_ERR_INVALID_ARGUMENT;
+		goto out;
+	}
+
+	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	/*
+	 * if nvm_data is not ptr guard the PBA must be in legacy format which
+	 * means pba_ptr is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (nvm_data != NVM_PBA_PTR_GUARD) {
+		e_dbg("NVM PBA number is not stored as string\n");
+
+		/* we will need 11 characters to store the PBA */
+		if (pba_num_size < 11) {
+			e_dbg("PBA string buffer too small\n");
+			return E1000_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pba_ptr */
+		pba_num[0] = (nvm_data >> 12) & 0xF;
+		pba_num[1] = (nvm_data >> 8) & 0xF;
+		pba_num[2] = (nvm_data >> 4) & 0xF;
+		pba_num[3] = nvm_data & 0xF;
+		pba_num[4] = (pba_ptr >> 12) & 0xF;
+		pba_num[5] = (pba_ptr >> 8) & 0xF;
+		pba_num[6] = '-';
+		pba_num[7] = 0;
+		pba_num[8] = (pba_ptr >> 4) & 0xF;
+		pba_num[9] = pba_ptr & 0xF;
+
+		/* put a null character on the end of our string */
+		pba_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (pba_num[offset] < 0xA)
+				pba_num[offset] += '0';
+			else if (pba_num[offset] < 0x10)
+				pba_num[offset] += 'A' - 0xA;
+		}
+
+		goto out;
+	}
+
+	ret_val = e1000_read_nvm(hw, pba_ptr, 1, &length);
+	if (ret_val) {
+		e_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		e_dbg("NVM PBA number section invalid length\n");
+		ret_val = E1000_ERR_NVM_PBA_SECTION;
+		goto out;
+	}
+	/* check if pba_num buffer is big enough */
+	if (pba_num_size < (((u32)length * 2) - 1)) {
+		e_dbg("PBA string buffer too small\n");
+		ret_val = E1000_ERR_NO_SPACE;
+		goto out;
+	}
+
+	/* trim pba length from start of string */
+	pba_ptr++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = e1000_read_nvm(hw, pba_ptr + offset, 1, &nvm_data);
+		if (ret_val) {
+			e_dbg("NVM Read Error\n");
+			goto out;
+		}
+		pba_num[offset * 2] = (u8)(nvm_data >> 8);
+		pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+	}
+	pba_num[offset * 2] = '\0';
+
+out:
+	return ret_val;
+}
+
+/**
  *  e1000_read_mac_addr_generic - Read device MAC address
  *  @hw: pointer to the HW structure
  *
@@ -2579,25 +2690,3 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
 out:
 	return ret_val;
 }
-
-s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num)
-{
-	s32 ret_val;
-	u16 nvm_data;
-
-	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
-	if (ret_val) {
-		e_dbg("NVM Read Error\n");
-		return ret_val;
-	}
-	*pba_num = (u32)(nvm_data << 16);
-
-	ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
-	if (ret_val) {
-		e_dbg("NVM Read Error\n");
-		return ret_val;
-	}
-	*pba_num |= nvm_data;
-
-	return 0;
-}
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index c4ca1629f53..fe50242aa9e 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -54,7 +54,7 @@
 
 #define DRV_EXTRAVERSION "-k2"
 
-#define DRV_VERSION "1.2.7" DRV_EXTRAVERSION
+#define DRV_VERSION "1.2.20" DRV_EXTRAVERSION
 char e1000e_driver_name[] = "e1000e";
 const char e1000e_driver_version[] = DRV_VERSION;
 
@@ -1325,7 +1325,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
 				goto next_desc;
 		}
 
-#define rxtop rx_ring->rx_skb_top
+#define rxtop (rx_ring->rx_skb_top)
 		if (!(status & E1000_RXD_STAT_EOP)) {
 			/* this descriptor is only the beginning (or middle) */
 			if (!rxtop) {
@@ -1806,9 +1806,8 @@ void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
 				err = pci_enable_msix(adapter->pdev,
 						      adapter->msix_entries,
 						      adapter->num_vectors);
-				if (err == 0) {
+				if (err == 0)
 					return;
-				}
 			}
 			/* MSI-X failed, so fall through and try MSI */
 			e_err("Failed to initialize MSI-X interrupts.  "
@@ -2059,10 +2058,9 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
 	int err = -ENOMEM, size;
 
 	size = sizeof(struct e1000_buffer) * tx_ring->count;
-	tx_ring->buffer_info = vmalloc(size);
+	tx_ring->buffer_info = vzalloc(size);
 	if (!tx_ring->buffer_info)
 		goto err;
-	memset(tx_ring->buffer_info, 0, size);
 
 	/* round up to nearest 4K */
 	tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
@@ -2095,10 +2093,9 @@ int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
 	int i, size, desc_len, err = -ENOMEM;
 
 	size = sizeof(struct e1000_buffer) * rx_ring->count;
-	rx_ring->buffer_info = vmalloc(size);
+	rx_ring->buffer_info = vzalloc(size);
 	if (!rx_ring->buffer_info)
 		goto err;
-	memset(rx_ring->buffer_info, 0, size);
 
 	for (i = 0; i < rx_ring->count; i++) {
 		buffer_info = &rx_ring->buffer_info[i];
@@ -2132,7 +2129,7 @@ err_pages:
 	}
 err:
 	vfree(rx_ring->buffer_info);
-	e_err("Unable to allocate memory for the transmit descriptor ring\n");
+	e_err("Unable to allocate memory for the receive descriptor ring\n");
 	return err;
 }
 
@@ -2200,9 +2197,8 @@ void e1000e_free_rx_resources(struct e1000_adapter *adapter)
 
 	e1000_clean_rx_ring(adapter);
 
-	for (i = 0; i < rx_ring->count; i++) {
+	for (i = 0; i < rx_ring->count; i++)
 		kfree(rx_ring->buffer_info[i].ps_pages);
-	}
 
 	vfree(rx_ring->buffer_info);
 	rx_ring->buffer_info = NULL;
@@ -2242,20 +2238,18 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
 		/* handle TSO and jumbo frames */
 		if (bytes/packets > 8000)
 			retval = bulk_latency;
-		else if ((packets < 5) && (bytes > 512)) {
+		else if ((packets < 5) && (bytes > 512))
 			retval = low_latency;
-		}
 		break;
 	case low_latency:  /* 50 usec aka 20000 ints/s */
 		if (bytes > 10000) {
 			/* this if handles the TSO accounting */
-			if (bytes/packets > 8000) {
+			if (bytes/packets > 8000)
 				retval = bulk_latency;
-			} else if ((packets < 10) || ((bytes/packets) > 1200)) {
+			else if ((packets < 10) || ((bytes/packets) > 1200))
 				retval = bulk_latency;
-			} else if ((packets > 35)) {
+			else if ((packets > 35))
 				retval = lowest_latency;
-			}
 		} else if (bytes/packets > 2000) {
 			retval = bulk_latency;
 		} else if (packets <= 2 && bytes < 512) {
@@ -2264,9 +2258,8 @@ static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
 		break;
 	case bulk_latency: /* 250 usec aka 4000 ints/s */
 		if (bytes > 25000) {
-			if (packets > 35) {
+			if (packets > 35)
 				retval = low_latency;
-			}
 		} else if (bytes < 6000) {
 			retval = low_latency;
 		}
@@ -4475,7 +4468,7 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
 		break;
 	}
 
-	css = skb_transport_offset(skb);
+	css = skb_checksum_start_offset(skb);
 
 	i = tx_ring->next_to_use;
 	buffer_info = &tx_ring->buffer_info[i];
@@ -4595,7 +4588,7 @@ dma_error:
 			i += tx_ring->count;
 		i--;
 		buffer_info = &tx_ring->buffer_info[i];
-		e1000_put_txbuf(adapter, buffer_info);;
+		e1000_put_txbuf(adapter, buffer_info);
 	}
 
 	return 0;
@@ -4631,7 +4624,7 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
 
 	i = tx_ring->next_to_use;
 
-	while (count--) {
+	do {
 		buffer_info = &tx_ring->buffer_info[i];
 		tx_desc = E1000_TX_DESC(*tx_ring, i);
 		tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
@@ -4642,7 +4635,7 @@ static void e1000_tx_queue(struct e1000_adapter *adapter,
 		i++;
 		if (i == tx_ring->count)
 			i = 0;
-	}
+	} while (--count > 0);
 
 	tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
 
@@ -5465,6 +5458,36 @@ static void e1000_shutdown(struct pci_dev *pdev)
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
+
+static irqreturn_t e1000_intr_msix(int irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	int vector, msix_irq;
+
+	if (adapter->msix_entries) {
+		vector = 0;
+		msix_irq = adapter->msix_entries[vector].vector;
+		disable_irq(msix_irq);
+		e1000_intr_msix_rx(msix_irq, netdev);
+		enable_irq(msix_irq);
+
+		vector++;
+		msix_irq = adapter->msix_entries[vector].vector;
+		disable_irq(msix_irq);
+		e1000_intr_msix_tx(msix_irq, netdev);
+		enable_irq(msix_irq);
+
+		vector++;
+		msix_irq = adapter->msix_entries[vector].vector;
+		disable_irq(msix_irq);
+		e1000_msix_other(msix_irq, netdev);
+		enable_irq(msix_irq);
+	}
+
+	return IRQ_HANDLED;
+}
+
 /*
  * Polling 'interrupt' - used by things like netconsole to send skbs
  * without having to re-enable interrupts. It's not called while
@@ -5474,10 +5497,21 @@ static void e1000_netpoll(struct net_device *netdev)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 
-	disable_irq(adapter->pdev->irq);
-	e1000_intr(adapter->pdev->irq, netdev);
-
-	enable_irq(adapter->pdev->irq);
+	switch (adapter->int_mode) {
+	case E1000E_INT_MODE_MSIX:
+		e1000_intr_msix(adapter->pdev->irq, netdev);
+		break;
+	case E1000E_INT_MODE_MSI:
+		disable_irq(adapter->pdev->irq);
+		e1000_intr_msi(adapter->pdev->irq, netdev);
+		enable_irq(adapter->pdev->irq);
+		break;
+	default: /* E1000E_INT_MODE_LEGACY */
+		disable_irq(adapter->pdev->irq);
+		e1000_intr(adapter->pdev->irq, netdev);
+		enable_irq(adapter->pdev->irq);
+		break;
+	}
 }
 #endif
 
@@ -5587,7 +5621,8 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
-	u32 pba_num;
+	u32 ret_val;
+	u8 pba_str[E1000_PBANUM_LENGTH];
 
 	/* print bus type/speed/width info */
 	e_info("(PCI Express:2.5GB/s:%s) %pM\n",
@@ -5598,9 +5633,12 @@ static void e1000_print_device_info(struct e1000_adapter *adapter)
 	       netdev->dev_addr);
 	e_info("Intel(R) PRO/%s Network Connection\n",
 	       (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
-	e1000e_read_pba_num(hw, &pba_num);
-	e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
-	       hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff));
+	ret_val = e1000_read_pba_string_generic(hw, pba_str,
+						E1000_PBANUM_LENGTH);
+	if (ret_val)
+		strcpy(pba_str, "Unknown");
+	e_info("MAC: %d, PHY: %d, PBA No: %s\n",
+	       hw->mac.type, hw->phy.type, pba_str);
 }
 
 static void e1000_eeprom_checks(struct e1000_adapter *adapter)
@@ -5864,6 +5902,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
 	INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
 	INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
 	INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
+	INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task);
 
 	/* Initialize link parameters. User can change them with ethtool */
 	adapter->hw.mac.autoneg = 1;
@@ -5984,8 +6023,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	bool down = test_bit(__E1000_DOWN, &adapter->state);
 
 	/*
-	 * flush_scheduled work may reschedule our watchdog task, so
-	 * explicitly disable watchdog tasks from being rescheduled
+	 * The timers may be rescheduled, so explicitly disable them
+	 * from being rescheduled.
 	 */
 	if (!down)
 		set_bit(__E1000_DOWN, &adapter->state);
@@ -5996,8 +6035,8 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
 	cancel_work_sync(&adapter->watchdog_task);
 	cancel_work_sync(&adapter->downshift_task);
 	cancel_work_sync(&adapter->update_phy_task);
+	cancel_work_sync(&adapter->led_blink_task);
 	cancel_work_sync(&adapter->print_hang_task);
-	flush_scheduled_work();
 
 	if (!(netdev->flags & IFF_UP))
 		e1000_power_down_phy(adapter);
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 3d36911f77f..a9612b0e4bc 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -421,7 +421,7 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 		static const struct e1000_option opt = {
 			.type = enable_option,
 			.name = "CRC Stripping",
-			.err  = "defaulting to enabled",
+			.err  = "defaulting to Enabled",
 			.def  = OPTION_ENABLED
 		};
 
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c
index 3d3dc0c8235..1781efeb55e 100644
--- a/drivers/net/e1000e/phy.c
+++ b/drivers/net/e1000e/phy.c
@@ -42,20 +42,20 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
                                           u16 *data, bool read);
 
 /* Cable length tables */
-static const u16 e1000_m88_cable_length_table[] =
-	{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+static const u16 e1000_m88_cable_length_table[] = {
+	0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
 #define M88E1000_CABLE_LENGTH_TABLE_SIZE \
 		ARRAY_SIZE(e1000_m88_cable_length_table)
 
-static const u16 e1000_igp_2_cable_length_table[] =
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
-	  6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
-	  26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
-	  44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
-	  66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
-	  87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
-	  100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
-	  124};
+static const u16 e1000_igp_2_cable_length_table[] = {
+	0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
+	6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
+	26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
+	44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
+	66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
+	87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
+	100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
+	124};
 #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
 		ARRAY_SIZE(e1000_igp_2_cable_length_table)
 
@@ -226,6 +226,13 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 	}
 	*data = (u16) mdic;
 
+	/*
+	 * Allow some time after each MDIC transaction to avoid
+	 * reading duplicate data in the next MDIC transaction.
+	 */
+	if (hw->mac.type == e1000_pch2lan)
+		udelay(100);
+
 	return 0;
 }
 
@@ -279,6 +286,13 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 		return -E1000_ERR_PHY;
 	}
 
+	/*
+	 * Allow some time after each MDIC transaction to avoid
+	 * reading duplicate data in the next MDIC transaction.
+	 */
+	if (hw->mac.type == e1000_pch2lan)
+		udelay(100);
+
 	return 0;
 }
 
@@ -1043,9 +1057,8 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
 
 	e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
 
-	if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+	if (phy->autoneg_mask & ADVERTISE_1000_FULL)
 		ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
-	}
 
 	return ret_val;
 }
@@ -1840,11 +1853,12 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
 	u16 phy_data, i, agc_value = 0;
 	u16 cur_agc_index, max_agc_index = 0;
 	u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
-	u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
-							 {IGP02E1000_PHY_AGC_A,
-							  IGP02E1000_PHY_AGC_B,
-							  IGP02E1000_PHY_AGC_C,
-							  IGP02E1000_PHY_AGC_D};
+	static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+	       IGP02E1000_PHY_AGC_A,
+	       IGP02E1000_PHY_AGC_B,
+	       IGP02E1000_PHY_AGC_C,
+	       IGP02E1000_PHY_AGC_D
+	};
 
 	/* Read the AGC registers for all channels */
 	for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
diff --git a/drivers/net/e2100.c b/drivers/net/e2100.c
index 06e72fbef86..94ec973b2bd 100644
--- a/drivers/net/e2100.c
+++ b/drivers/net/e2100.c
@@ -216,7 +216,7 @@ static int __init e21_probe1(struct net_device *dev, int ioaddr)
 		printk(" %02X", station_addr[i]);
 
 	if (dev->irq < 2) {
-		int irqlist[] = {15, 11, 10, 12, 5, 9, 3, 4};
+		static const int irqlist[] = {15, 11, 10, 12, 5, 9, 3, 4};
 		for (i = 0; i < ARRAY_SIZE(irqlist); i++)
 			if (request_irq (irqlist[i], NULL, 0, "bogus", NULL) != -EBUSY) {
 				dev->irq = irqlist[i];
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index 9e19fbc2f17..4fa8d2a4aef 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -891,12 +891,13 @@ err:
    there is non-reboot way to recover if something goes wrong.
    */
 
-static char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1};
-static char irqrmap2[] = {-1,-1,4,0,1,2,-1,3,-1,4,5,6,7,-1,-1,-1};
+static const char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1};
+static const char irqrmap2[] = {-1,-1,4,0,1,2,-1,3,-1,4,5,6,7,-1,-1,-1};
 static int	eepro_grab_irq(struct net_device *dev)
 {
-	int irqlist[] = { 3, 4, 5, 7, 9, 10, 11, 12, 0 };
-	int *irqp = irqlist, temp_reg, ioaddr = dev->base_addr;
+	static const int irqlist[] = { 3, 4, 5, 7, 9, 10, 11, 12, 0 };
+	const int *irqp = irqlist;
+	int temp_reg, ioaddr = dev->base_addr;
 
 	eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
 
diff --git a/drivers/net/eexpress.c b/drivers/net/eexpress.c
index 12c37d26410..48ee51bb9e5 100644
--- a/drivers/net/eexpress.c
+++ b/drivers/net/eexpress.c
@@ -1103,7 +1103,7 @@ static int __init eexp_hw_probe(struct net_device *dev, unsigned short ioaddr)
 		dev->dev_addr[i] = ((unsigned char *)hw_addr)[5-i];
 
 	{
-		static char irqmap[]={0, 9, 3, 4, 5, 10, 11, 0};
+		static const char irqmap[] = { 0, 9, 3, 4, 5, 10, 11, 0 };
 		unsigned short setupval = eexp_hw_readeeprom(ioaddr,0);
 
 		/* Use the IRQ from EEPROM if none was given */
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 8e745e74828..a724a2d1450 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -130,19 +130,6 @@
 
 /* utility functions */
 
-#define ehea_info(fmt, args...) \
-	printk(KERN_INFO DRV_NAME ": " fmt "\n", ## args)
-
-#define ehea_error(fmt, args...) \
-	printk(KERN_ERR DRV_NAME ": Error in %s: " fmt "\n", __func__, ## args)
-
-#ifdef DEBUG
-#define ehea_debug(fmt, args...) \
-	printk(KERN_DEBUG DRV_NAME ": " fmt, ## args)
-#else
-#define ehea_debug(fmt, args...) do {} while (0)
-#endif
-
 void ehea_dump(void *adr, int len, char *msg);
 
 #define EHEA_BMASK(pos, length) (((pos) << 16) + (length))
@@ -515,6 +502,4 @@ void ehea_set_ethtool_ops(struct net_device *netdev);
 int ehea_sense_port_attr(struct ehea_port *port);
 int ehea_set_portspeed(struct ehea_port *port, u32 port_speed);
 
-extern struct work_struct ehea_rereg_mr_task;
-
 #endif	/* __EHEA_H__ */
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index 75b099ce49c..3e2e734fecb 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -26,6 +26,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "ehea.h"
 #include "ehea_phyp.h"
 
@@ -118,10 +120,10 @@ doit:
 	ret = ehea_set_portspeed(port, sp);
 
 	if (!ret)
-		ehea_info("%s: Port speed successfully set: %dMbps "
-			  "%s Duplex",
-			  port->netdev->name, port->port_speed,
-			  port->full_duplex == 1 ? "Full" : "Half");
+		netdev_info(dev,
+			    "Port speed successfully set: %dMbps %s Duplex\n",
+			    port->port_speed,
+			    port->full_duplex == 1 ? "Full" : "Half");
 out:
 	return ret;
 }
@@ -134,10 +136,10 @@ static int ehea_nway_reset(struct net_device *dev)
 	ret = ehea_set_portspeed(port, EHEA_SPEED_AUTONEG);
 
 	if (!ret)
-		ehea_info("%s: Port speed successfully set: %dMbps "
-			  "%s Duplex",
-			  port->netdev->name, port->port_speed,
-			  port->full_duplex == 1 ? "Full" : "Half");
+		netdev_info(port->netdev,
+			    "Port speed successfully set: %dMbps %s Duplex\n",
+			    port->port_speed,
+			    port->full_duplex == 1 ? "Full" : "Half");
 	return ret;
 }
 
@@ -261,6 +263,20 @@ static void ehea_get_ethtool_stats(struct net_device *dev,
 
 }
 
+static int ehea_set_flags(struct net_device *dev, u32 data)
+{
+	/* Avoid changing the VLAN flags */
+	if ((data & (ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN)) !=
+	    (ethtool_op_get_flags(dev) & (ETH_FLAG_RXVLAN |
+					  ETH_FLAG_TXVLAN))){
+		return -EINVAL;
+	}
+
+	return ethtool_op_set_flags(dev, data, ETH_FLAG_LRO
+					| ETH_FLAG_TXVLAN
+					| ETH_FLAG_RXVLAN);
+}
+
 const struct ethtool_ops ehea_ethtool_ops = {
 	.get_settings = ehea_get_settings,
 	.get_drvinfo = ehea_get_drvinfo,
@@ -273,6 +289,8 @@ const struct ethtool_ops ehea_ethtool_ops = {
 	.get_ethtool_stats = ehea_get_ethtool_stats,
 	.get_rx_csum = ehea_get_rx_csum,
 	.set_settings = ehea_set_settings,
+	.get_flags = ethtool_op_get_flags,
+	.set_flags = ehea_set_flags,
 	.nway_reset = ehea_nway_reset,		/* Restart autonegotiation */
 };
 
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 182b2a7be8d..1032b5bbe23 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -26,6 +26,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/in.h>
 #include <linux/ip.h>
 #include <linux/tcp.h>
@@ -101,7 +103,6 @@ MODULE_PARM_DESC(use_lro, " Large Receive Offload, 1: enable, 0: disable, "
 static int port_name_cnt;
 static LIST_HEAD(adapter_list);
 static unsigned long ehea_driver_flags;
-struct work_struct ehea_rereg_mr_task;
 static DEFINE_MUTEX(dlpar_mem_lock);
 struct ehea_fw_handle_array ehea_fw_handles;
 struct ehea_bcmc_reg_array ehea_bcmc_regs;
@@ -136,8 +137,8 @@ void ehea_dump(void *adr, int len, char *msg)
 	int x;
 	unsigned char *deb = adr;
 	for (x = 0; x < len; x += 16) {
-		printk(DRV_NAME " %s adr=%p ofs=%04x %016llx %016llx\n", msg,
-			  deb, x, *((u64 *)&deb[0]), *((u64 *)&deb[8]));
+		pr_info("%s adr=%p ofs=%04x %016llx %016llx\n",
+			msg, deb, x, *((u64 *)&deb[0]), *((u64 *)&deb[8]));
 		deb += 16;
 	}
 }
@@ -337,7 +338,7 @@ static struct net_device_stats *ehea_get_stats(struct net_device *dev)
 
 	cb2 = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!cb2) {
-		ehea_error("no mem for cb2");
+		netdev_err(dev, "no mem for cb2\n");
 		goto out;
 	}
 
@@ -345,7 +346,7 @@ static struct net_device_stats *ehea_get_stats(struct net_device *dev)
 				      port->logical_port_id,
 				      H_PORT_CB2, H_PORT_CB2_ALL, cb2);
 	if (hret != H_SUCCESS) {
-		ehea_error("query_ehea_port failed");
+		netdev_err(dev, "query_ehea_port failed\n");
 		goto out_herr;
 	}
 
@@ -400,6 +401,7 @@ static void ehea_refill_rq1(struct ehea_port_res *pr, int index, int nr_of_wqes)
 			skb_arr_rq1[index] = netdev_alloc_skb(dev,
 							      EHEA_L_PKT_SIZE);
 			if (!skb_arr_rq1[index]) {
+				netdev_info(dev, "Unable to allocate enough skb in the array\n");
 				pr->rq1_skba.os_skbs = fill_wqes - i;
 				break;
 			}
@@ -422,13 +424,20 @@ static void ehea_init_fill_rq1(struct ehea_port_res *pr, int nr_rq1a)
 	struct net_device *dev = pr->port->netdev;
 	int i;
 
-	for (i = 0; i < pr->rq1_skba.len; i++) {
+	if (nr_rq1a > pr->rq1_skba.len) {
+		netdev_err(dev, "NR_RQ1A bigger than skb array len\n");
+		return;
+	}
+
+	for (i = 0; i < nr_rq1a; i++) {
 		skb_arr_rq1[i] = netdev_alloc_skb(dev, EHEA_L_PKT_SIZE);
-		if (!skb_arr_rq1[i])
+		if (!skb_arr_rq1[i]) {
+			netdev_info(dev, "Not enough memory to allocate skb array\n");
 			break;
+		}
 	}
 	/* Ring doorbell */
-	ehea_update_rq1a(pr->qp, nr_rq1a);
+	ehea_update_rq1a(pr->qp, i);
 }
 
 static int ehea_refill_rq_def(struct ehea_port_res *pr,
@@ -461,8 +470,9 @@ static int ehea_refill_rq_def(struct ehea_port_res *pr,
 		if (!skb) {
 			q_skba->os_skbs = fill_wqes - i;
 			if (q_skba->os_skbs == q_skba->len - 2) {
-				ehea_info("%s: rq%i ran dry - no mem for skb",
-					  pr->port->netdev->name, rq_nr);
+				netdev_info(pr->port->netdev,
+					    "rq%i ran dry - no mem for skb\n",
+					    rq_nr);
 				ret = -ENOMEM;
 			}
 			break;
@@ -627,8 +637,8 @@ static int ehea_treat_poll_error(struct ehea_port_res *pr, int rq,
 
 	if (cqe->status & EHEA_CQE_STAT_FAT_ERR_MASK) {
 		if (netif_msg_rx_err(pr->port)) {
-			ehea_error("Critical receive error for QP %d. "
-				   "Resetting port.", pr->qp->init_attr.qp_nr);
+			pr_err("Critical receive error for QP %d. Resetting port.\n",
+			       pr->qp->init_attr.qp_nr);
 			ehea_dump(cqe, sizeof(*cqe), "CQE");
 		}
 		ehea_schedule_port_reset(pr->port);
@@ -675,7 +685,7 @@ static void ehea_proc_skb(struct ehea_port_res *pr, struct ehea_cqe *cqe,
 	int vlan_extracted = ((cqe->status & EHEA_CQE_VLAN_TAG_XTRACT) &&
 			      pr->port->vgrp);
 
-	if (use_lro) {
+	if (skb->dev->features & NETIF_F_LRO) {
 		if (vlan_extracted)
 			lro_vlan_hwaccel_receive_skb(&pr->lro_mgr, skb,
 						     pr->port->vgrp,
@@ -730,13 +740,15 @@ static int ehea_proc_rwqes(struct net_device *dev,
 							  skb_arr_rq1_len,
 							  wqe_index);
 				if (unlikely(!skb)) {
-					if (netif_msg_rx_err(port))
-						ehea_error("LL rq1: skb=NULL");
+					netif_info(port, rx_err, dev,
+						  "LL rq1: skb=NULL\n");
 
 					skb = netdev_alloc_skb(dev,
 							       EHEA_L_PKT_SIZE);
-					if (!skb)
+					if (!skb) {
+						netdev_err(dev, "Not enough memory to allocate skb\n");
 						break;
+					}
 				}
 				skb_copy_to_linear_data(skb, ((char *)cqe) + 64,
 						 cqe->num_bytes_transfered - 4);
@@ -746,8 +758,8 @@ static int ehea_proc_rwqes(struct net_device *dev,
 				skb = get_skb_by_index(skb_arr_rq2,
 						       skb_arr_rq2_len, cqe);
 				if (unlikely(!skb)) {
-					if (netif_msg_rx_err(port))
-						ehea_error("rq2: skb=NULL");
+					netif_err(port, rx_err, dev,
+						  "rq2: skb=NULL\n");
 					break;
 				}
 				ehea_fill_skb(dev, skb, cqe);
@@ -757,8 +769,8 @@ static int ehea_proc_rwqes(struct net_device *dev,
 				skb = get_skb_by_index(skb_arr_rq3,
 						       skb_arr_rq3_len, cqe);
 				if (unlikely(!skb)) {
-					if (netif_msg_rx_err(port))
-						ehea_error("rq3: skb=NULL");
+					netif_err(port, rx_err, dev,
+						  "rq3: skb=NULL\n");
 					break;
 				}
 				ehea_fill_skb(dev, skb, cqe);
@@ -777,7 +789,7 @@ static int ehea_proc_rwqes(struct net_device *dev,
 		}
 		cqe = ehea_poll_rq1(qp, &wqe_index);
 	}
-	if (use_lro)
+	if (dev->features & NETIF_F_LRO)
 		lro_flush_all(&pr->lro_mgr);
 
 	pr->rx_packets += processed;
@@ -830,7 +842,7 @@ static void check_sqs(struct ehea_port *port)
 					 msecs_to_jiffies(100));
 
 		if (!ret) {
-			ehea_error("HW/SW queues out of sync");
+			pr_err("HW/SW queues out of sync\n");
 			ehea_schedule_port_reset(pr->port);
 			return;
 		}
@@ -863,14 +875,14 @@ static struct ehea_cqe *ehea_proc_cqes(struct ehea_port_res *pr, int my_quota)
 		}
 
 		if (cqe->status & EHEA_CQE_STAT_ERR_MASK) {
-			ehea_error("Bad send completion status=0x%04X",
-				   cqe->status);
+			pr_err("Bad send completion status=0x%04X\n",
+			       cqe->status);
 
 			if (netif_msg_tx_err(pr->port))
 				ehea_dump(cqe, sizeof(*cqe), "Send CQE");
 
 			if (cqe->status & EHEA_CQE_STAT_RESET_MASK) {
-				ehea_error("Resetting port");
+				pr_err("Resetting port\n");
 				ehea_schedule_port_reset(pr->port);
 				break;
 			}
@@ -988,8 +1000,8 @@ static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param)
 
 	while (eqe) {
 		qp_token = EHEA_BMASK_GET(EHEA_EQE_QP_TOKEN, eqe->entry);
-		ehea_error("QP aff_err: entry=0x%llx, token=0x%x",
-			   eqe->entry, qp_token);
+		pr_err("QP aff_err: entry=0x%llx, token=0x%x\n",
+		       eqe->entry, qp_token);
 
 		qp = port->port_res[qp_token].qp;
 
@@ -1007,7 +1019,7 @@ static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param)
 	}
 
 	if (reset_port) {
-		ehea_error("Resetting port");
+		pr_err("Resetting port\n");
 		ehea_schedule_port_reset(port);
 	}
 
@@ -1035,7 +1047,7 @@ int ehea_sense_port_attr(struct ehea_port *port)
 	/* may be called via ehea_neq_tasklet() */
 	cb0 = (void *)get_zeroed_page(GFP_ATOMIC);
 	if (!cb0) {
-		ehea_error("no mem for cb0");
+		pr_err("no mem for cb0\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -1127,7 +1139,7 @@ int ehea_set_portspeed(struct ehea_port *port, u32 port_speed)
 
 	cb4 = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!cb4) {
-		ehea_error("no mem for cb4");
+		pr_err("no mem for cb4\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -1178,16 +1190,16 @@ int ehea_set_portspeed(struct ehea_port *port, u32 port_speed)
 				break;
 			}
 		} else {
-			ehea_error("Failed sensing port speed");
+			pr_err("Failed sensing port speed\n");
 			ret = -EIO;
 		}
 	} else {
 		if (hret == H_AUTHORITY) {
-			ehea_info("Hypervisor denied setting port speed");
+			pr_info("Hypervisor denied setting port speed\n");
 			ret = -EPERM;
 		} else {
 			ret = -EIO;
-			ehea_error("Failed setting port speed");
+			pr_err("Failed setting port speed\n");
 		}
 	}
 	if (!prop_carrier_state || (port->phy_link == EHEA_PHY_LINK_UP))
@@ -1204,80 +1216,78 @@ static void ehea_parse_eqe(struct ehea_adapter *adapter, u64 eqe)
 	u8 ec;
 	u8 portnum;
 	struct ehea_port *port;
+	struct net_device *dev;
 
 	ec = EHEA_BMASK_GET(NEQE_EVENT_CODE, eqe);
 	portnum = EHEA_BMASK_GET(NEQE_PORTNUM, eqe);
 	port = ehea_get_port(adapter, portnum);
+	dev = port->netdev;
 
 	switch (ec) {
 	case EHEA_EC_PORTSTATE_CHG:	/* port state change */
 
 		if (!port) {
-			ehea_error("unknown portnum %x", portnum);
+			netdev_err(dev, "unknown portnum %x\n", portnum);
 			break;
 		}
 
 		if (EHEA_BMASK_GET(NEQE_PORT_UP, eqe)) {
-			if (!netif_carrier_ok(port->netdev)) {
+			if (!netif_carrier_ok(dev)) {
 				ret = ehea_sense_port_attr(port);
 				if (ret) {
-					ehea_error("failed resensing port "
-						   "attributes");
+					netdev_err(dev, "failed resensing port attributes\n");
 					break;
 				}
 
-				if (netif_msg_link(port))
-					ehea_info("%s: Logical port up: %dMbps "
-						  "%s Duplex",
-						  port->netdev->name,
-						  port->port_speed,
-						  port->full_duplex ==
-						  1 ? "Full" : "Half");
+				netif_info(port, link, dev,
+					   "Logical port up: %dMbps %s Duplex\n",
+					   port->port_speed,
+					   port->full_duplex == 1 ?
+					   "Full" : "Half");
 
-				netif_carrier_on(port->netdev);
-				netif_wake_queue(port->netdev);
+				netif_carrier_on(dev);
+				netif_wake_queue(dev);
 			}
 		} else
-			if (netif_carrier_ok(port->netdev)) {
-				if (netif_msg_link(port))
-					ehea_info("%s: Logical port down",
-						  port->netdev->name);
-				netif_carrier_off(port->netdev);
-				netif_stop_queue(port->netdev);
+			if (netif_carrier_ok(dev)) {
+				netif_info(port, link, dev,
+					   "Logical port down\n");
+				netif_carrier_off(dev);
+				netif_stop_queue(dev);
 			}
 
 		if (EHEA_BMASK_GET(NEQE_EXTSWITCH_PORT_UP, eqe)) {
 			port->phy_link = EHEA_PHY_LINK_UP;
-			if (netif_msg_link(port))
-				ehea_info("%s: Physical port up",
-					  port->netdev->name);
+			netif_info(port, link, dev,
+				   "Physical port up\n");
 			if (prop_carrier_state)
-				netif_carrier_on(port->netdev);
+				netif_carrier_on(dev);
 		} else {
 			port->phy_link = EHEA_PHY_LINK_DOWN;
-			if (netif_msg_link(port))
-				ehea_info("%s: Physical port down",
-					  port->netdev->name);
+			netif_info(port, link, dev,
+				   "Physical port down\n");
 			if (prop_carrier_state)
-				netif_carrier_off(port->netdev);
+				netif_carrier_off(dev);
 		}
 
 		if (EHEA_BMASK_GET(NEQE_EXTSWITCH_PRIMARY, eqe))
-			ehea_info("External switch port is primary port");
+			netdev_info(dev,
+				    "External switch port is primary port\n");
 		else
-			ehea_info("External switch port is backup port");
+			netdev_info(dev,
+				    "External switch port is backup port\n");
 
 		break;
 	case EHEA_EC_ADAPTER_MALFUNC:
-		ehea_error("Adapter malfunction");
+		netdev_err(dev, "Adapter malfunction\n");
 		break;
 	case EHEA_EC_PORT_MALFUNC:
-		ehea_info("Port malfunction: Device: %s", port->netdev->name);
-		netif_carrier_off(port->netdev);
-		netif_stop_queue(port->netdev);
+		netdev_info(dev, "Port malfunction\n");
+		netif_carrier_off(dev);
+		netif_stop_queue(dev);
 		break;
 	default:
-		ehea_error("unknown event code %x, eqe=0x%llX", ec, eqe);
+		netdev_err(dev, "unknown event code %x, eqe=0x%llX\n", ec, eqe);
 		break;
 	}
 }
@@ -1289,13 +1299,13 @@ static void ehea_neq_tasklet(unsigned long data)
 	u64 event_mask;
 
 	eqe = ehea_poll_eq(adapter->neq);
-	ehea_debug("eqe=%p", eqe);
+	pr_debug("eqe=%p\n", eqe);
 
 	while (eqe) {
-		ehea_debug("*eqe=%lx", eqe->entry);
+		pr_debug("*eqe=%lx\n", (unsigned long) eqe->entry);
 		ehea_parse_eqe(adapter, eqe->entry);
 		eqe = ehea_poll_eq(adapter->neq);
-		ehea_debug("next eqe=%p", eqe);
+		pr_debug("next eqe=%p\n", eqe);
 	}
 
 	event_mask = EHEA_BMASK_SET(NELR_PORTSTATE_CHG, 1)
@@ -1344,14 +1354,14 @@ static int ehea_reg_interrupts(struct net_device *dev)
 				  ehea_qp_aff_irq_handler,
 				  IRQF_DISABLED, port->int_aff_name, port);
 	if (ret) {
-		ehea_error("failed registering irq for qp_aff_irq_handler:"
-			   "ist=%X", port->qp_eq->attr.ist1);
+		netdev_err(dev, "failed registering irq for qp_aff_irq_handler:ist=%X\n",
+			   port->qp_eq->attr.ist1);
 		goto out_free_qpeq;
 	}
 
-	if (netif_msg_ifup(port))
-		ehea_info("irq_handle 0x%X for function qp_aff_irq_handler "
-			  "registered", port->qp_eq->attr.ist1);
+	netif_info(port, ifup, dev,
+		   "irq_handle 0x%X for function qp_aff_irq_handler registered\n",
+		   port->qp_eq->attr.ist1);
 
 
 	for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
@@ -1363,14 +1373,13 @@ static int ehea_reg_interrupts(struct net_device *dev)
 					  IRQF_DISABLED, pr->int_send_name,
 					  pr);
 		if (ret) {
-			ehea_error("failed registering irq for ehea_queue "
-				   "port_res_nr:%d, ist=%X", i,
-				   pr->eq->attr.ist1);
+			netdev_err(dev, "failed registering irq for ehea_queue port_res_nr:%d, ist=%X\n",
+				   i, pr->eq->attr.ist1);
 			goto out_free_req;
 		}
-		if (netif_msg_ifup(port))
-			ehea_info("irq_handle 0x%X for function ehea_queue_int "
-				  "%d registered", pr->eq->attr.ist1, i);
+		netif_info(port, ifup, dev,
+			   "irq_handle 0x%X for function ehea_queue_int %d registered\n",
+			   pr->eq->attr.ist1, i);
 	}
 out:
 	return ret;
@@ -1401,16 +1410,16 @@ static void ehea_free_interrupts(struct net_device *dev)
 	for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
 		pr = &port->port_res[i];
 		ibmebus_free_irq(pr->eq->attr.ist1, pr);
-		if (netif_msg_intr(port))
-			ehea_info("free send irq for res %d with handle 0x%X",
-				  i, pr->eq->attr.ist1);
+		netif_info(port, intr, dev,
+			   "free send irq for res %d with handle 0x%X\n",
+			   i, pr->eq->attr.ist1);
 	}
 
 	/* associated events */
 	ibmebus_free_irq(port->qp_eq->attr.ist1, port);
-	if (netif_msg_intr(port))
-		ehea_info("associated event interrupt for handle 0x%X freed",
-			  port->qp_eq->attr.ist1);
+	netif_info(port, intr, dev,
+		   "associated event interrupt for handle 0x%X freed\n",
+		   port->qp_eq->attr.ist1);
 }
 
 static int ehea_configure_port(struct ehea_port *port)
@@ -1479,7 +1488,7 @@ int ehea_gen_smrs(struct ehea_port_res *pr)
 out_free:
 	ehea_rem_mr(&pr->send_mr);
 out:
-	ehea_error("Generating SMRS failed\n");
+	pr_err("Generating SMRS failed\n");
 	return -EIO;
 }
 
@@ -1496,12 +1505,10 @@ static int ehea_init_q_skba(struct ehea_q_skb_arr *q_skba, int max_q_entries)
 {
 	int arr_size = sizeof(void *) * max_q_entries;
 
-	q_skba->arr = vmalloc(arr_size);
+	q_skba->arr = vzalloc(arr_size);
 	if (!q_skba->arr)
 		return -ENOMEM;
 
-	memset(q_skba->arr, 0, arr_size);
-
 	q_skba->len = max_q_entries;
 	q_skba->index = 0;
 	q_skba->os_skbs = 0;
@@ -1536,7 +1543,7 @@ static int ehea_init_port_res(struct ehea_port *port, struct ehea_port_res *pr,
 
 	pr->eq = ehea_create_eq(adapter, eq_type, EHEA_MAX_ENTRIES_EQ, 0);
 	if (!pr->eq) {
-		ehea_error("create_eq failed (eq)");
+		pr_err("create_eq failed (eq)\n");
 		goto out_free;
 	}
 
@@ -1544,7 +1551,7 @@ static int ehea_init_port_res(struct ehea_port *port, struct ehea_port_res *pr,
 				     pr->eq->fw_handle,
 				     port->logical_port_id);
 	if (!pr->recv_cq) {
-		ehea_error("create_cq failed (cq_recv)");
+		pr_err("create_cq failed (cq_recv)\n");
 		goto out_free;
 	}
 
@@ -1552,19 +1559,19 @@ static int ehea_init_port_res(struct ehea_port *port, struct ehea_port_res *pr,
 				     pr->eq->fw_handle,
 				     port->logical_port_id);
 	if (!pr->send_cq) {
-		ehea_error("create_cq failed (cq_send)");
+		pr_err("create_cq failed (cq_send)\n");
 		goto out_free;
 	}
 
 	if (netif_msg_ifup(port))
-		ehea_info("Send CQ: act_nr_cqes=%d, Recv CQ: act_nr_cqes=%d",
-			  pr->send_cq->attr.act_nr_of_cqes,
-			  pr->recv_cq->attr.act_nr_of_cqes);
+		pr_info("Send CQ: act_nr_cqes=%d, Recv CQ: act_nr_cqes=%d\n",
+			pr->send_cq->attr.act_nr_of_cqes,
+			pr->recv_cq->attr.act_nr_of_cqes);
 
 	init_attr = kzalloc(sizeof(*init_attr), GFP_KERNEL);
 	if (!init_attr) {
 		ret = -ENOMEM;
-		ehea_error("no mem for ehea_qp_init_attr");
+		pr_err("no mem for ehea_qp_init_attr\n");
 		goto out_free;
 	}
 
@@ -1589,18 +1596,18 @@ static int ehea_init_port_res(struct ehea_port *port, struct ehea_port_res *pr,
 
 	pr->qp = ehea_create_qp(adapter, adapter->pd, init_attr);
 	if (!pr->qp) {
-		ehea_error("create_qp failed");
+		pr_err("create_qp failed\n");
 		ret = -EIO;
 		goto out_free;
 	}
 
 	if (netif_msg_ifup(port))
-		ehea_info("QP: qp_nr=%d\n act_nr_snd_wqe=%d\n nr_rwqe_rq1=%d\n "
-			  "nr_rwqe_rq2=%d\n nr_rwqe_rq3=%d", init_attr->qp_nr,
-			  init_attr->act_nr_send_wqes,
-			  init_attr->act_nr_rwqes_rq1,
-			  init_attr->act_nr_rwqes_rq2,
-			  init_attr->act_nr_rwqes_rq3);
+		pr_info("QP: qp_nr=%d\n act_nr_snd_wqe=%d\n nr_rwqe_rq1=%d\n nr_rwqe_rq2=%d\n nr_rwqe_rq3=%d\n",
+			init_attr->qp_nr,
+			init_attr->act_nr_send_wqes,
+			init_attr->act_nr_rwqes_rq1,
+			init_attr->act_nr_rwqes_rq2,
+			init_attr->act_nr_rwqes_rq3);
 
 	pr->sq_skba_size = init_attr->act_nr_send_wqes + 1;
 
@@ -1751,7 +1758,7 @@ static void write_swqe2_TSO(struct sk_buff *skb,
 			swqe->descriptors++;
 		}
 	} else
-		ehea_error("cannot handle fragmented headers");
+		pr_err("cannot handle fragmented headers\n");
 }
 
 static void write_swqe2_nonTSO(struct sk_buff *skb,
@@ -1847,8 +1854,8 @@ static int ehea_broadcast_reg_helper(struct ehea_port *port, u32 hcallid)
 				     port->logical_port_id,
 				     reg_type, port->mac_addr, 0, hcallid);
 	if (hret != H_SUCCESS) {
-		ehea_error("%sregistering bc address failed (tagged)",
-			   hcallid == H_REG_BCMC ? "" : "de");
+		pr_err("%sregistering bc address failed (tagged)\n",
+		       hcallid == H_REG_BCMC ? "" : "de");
 		ret = -EIO;
 		goto out_herr;
 	}
@@ -1859,8 +1866,8 @@ static int ehea_broadcast_reg_helper(struct ehea_port *port, u32 hcallid)
 				     port->logical_port_id,
 				     reg_type, port->mac_addr, 0, hcallid);
 	if (hret != H_SUCCESS) {
-		ehea_error("%sregistering bc address failed (vlan)",
-			   hcallid == H_REG_BCMC ? "" : "de");
+		pr_err("%sregistering bc address failed (vlan)\n",
+		       hcallid == H_REG_BCMC ? "" : "de");
 		ret = -EIO;
 	}
 out_herr:
@@ -1882,7 +1889,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa)
 
 	cb0 = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!cb0) {
-		ehea_error("no mem for cb0");
+		pr_err("no mem for cb0\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -1930,11 +1937,11 @@ out:
 static void ehea_promiscuous_error(u64 hret, int enable)
 {
 	if (hret == H_AUTHORITY)
-		ehea_info("Hypervisor denied %sabling promiscuous mode",
-			  enable == 1 ? "en" : "dis");
+		pr_info("Hypervisor denied %sabling promiscuous mode\n",
+			enable == 1 ? "en" : "dis");
 	else
-		ehea_error("failed %sabling promiscuous mode",
-			   enable == 1 ? "en" : "dis");
+		pr_err("failed %sabling promiscuous mode\n",
+		       enable == 1 ? "en" : "dis");
 }
 
 static void ehea_promiscuous(struct net_device *dev, int enable)
@@ -1948,7 +1955,7 @@ static void ehea_promiscuous(struct net_device *dev, int enable)
 
 	cb7 = (void *)get_zeroed_page(GFP_ATOMIC);
 	if (!cb7) {
-		ehea_error("no mem for cb7");
+		pr_err("no mem for cb7\n");
 		goto out;
 	}
 
@@ -2008,7 +2015,7 @@ static int ehea_drop_multicast_list(struct net_device *dev)
 		hret = ehea_multicast_reg_helper(port, mc_entry->macaddr,
 						 H_DEREG_BCMC);
 		if (hret) {
-			ehea_error("failed deregistering mcast MAC");
+			pr_err("failed deregistering mcast MAC\n");
 			ret = -EIO;
 		}
 
@@ -2031,7 +2038,8 @@ static void ehea_allmulti(struct net_device *dev, int enable)
 			if (!hret)
 				port->allmulti = 1;
 			else
-				ehea_error("failed enabling IFF_ALLMULTI");
+				netdev_err(dev,
+					   "failed enabling IFF_ALLMULTI\n");
 		}
 	} else
 		if (!enable) {
@@ -2040,7 +2048,8 @@ static void ehea_allmulti(struct net_device *dev, int enable)
 			if (!hret)
 				port->allmulti = 0;
 			else
-				ehea_error("failed disabling IFF_ALLMULTI");
+				netdev_err(dev,
+					   "failed disabling IFF_ALLMULTI\n");
 		}
 }
 
@@ -2051,7 +2060,7 @@ static void ehea_add_multicast_entry(struct ehea_port *port, u8 *mc_mac_addr)
 
 	ehea_mcl_entry = kzalloc(sizeof(*ehea_mcl_entry), GFP_ATOMIC);
 	if (!ehea_mcl_entry) {
-		ehea_error("no mem for mcl_entry");
+		pr_err("no mem for mcl_entry\n");
 		return;
 	}
 
@@ -2064,7 +2073,7 @@ static void ehea_add_multicast_entry(struct ehea_port *port, u8 *mc_mac_addr)
 	if (!hret)
 		list_add(&ehea_mcl_entry->list, &port->mc_list->list);
 	else {
-		ehea_error("failed registering mcast MAC");
+		pr_err("failed registering mcast MAC\n");
 		kfree(ehea_mcl_entry);
 	}
 }
@@ -2097,9 +2106,8 @@ static void ehea_set_multicast_list(struct net_device *dev)
 		}
 
 		if (netdev_mc_count(dev) > port->adapter->max_mc_mac) {
-			ehea_info("Mcast registration limit reached (0x%llx). "
-				  "Use ALLMULTI!",
-				  port->adapter->max_mc_mac);
+			pr_info("Mcast registration limit reached (0x%llx). Use ALLMULTI!\n",
+				port->adapter->max_mc_mac);
 			goto out;
 		}
 
@@ -2305,10 +2313,10 @@ static int ehea_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	}
 	pr->swqe_id_counter += 1;
 
-	if (netif_msg_tx_queued(port)) {
-		ehea_info("post swqe on QP %d", pr->qp->init_attr.qp_nr);
+	netif_info(port, tx_queued, dev,
+		   "post swqe on QP %d\n", pr->qp->init_attr.qp_nr);
+	if (netif_msg_tx_queued(port))
 		ehea_dump(swqe, 512, "swqe");
-	}
 
 	if (unlikely(test_bit(__EHEA_STOP_XFER, &ehea_driver_flags))) {
 		netif_stop_queue(dev);
@@ -2344,14 +2352,14 @@ static void ehea_vlan_rx_register(struct net_device *dev,
 
 	cb1 = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!cb1) {
-		ehea_error("no mem for cb1");
+		pr_err("no mem for cb1\n");
 		goto out;
 	}
 
 	hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id,
 				       H_PORT_CB1, H_PORT_CB1_ALL, cb1);
 	if (hret != H_SUCCESS)
-		ehea_error("modify_ehea_port failed");
+		pr_err("modify_ehea_port failed\n");
 
 	free_page((unsigned long)cb1);
 out:
@@ -2368,14 +2376,14 @@ static void ehea_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 
 	cb1 = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!cb1) {
-		ehea_error("no mem for cb1");
+		pr_err("no mem for cb1\n");
 		goto out;
 	}
 
 	hret = ehea_h_query_ehea_port(adapter->handle, port->logical_port_id,
 				      H_PORT_CB1, H_PORT_CB1_ALL, cb1);
 	if (hret != H_SUCCESS) {
-		ehea_error("query_ehea_port failed");
+		pr_err("query_ehea_port failed\n");
 		goto out;
 	}
 
@@ -2385,7 +2393,7 @@ static void ehea_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 	hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id,
 				       H_PORT_CB1, H_PORT_CB1_ALL, cb1);
 	if (hret != H_SUCCESS)
-		ehea_error("modify_ehea_port failed");
+		pr_err("modify_ehea_port failed\n");
 out:
 	free_page((unsigned long)cb1);
 	return;
@@ -2403,14 +2411,14 @@ static void ehea_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 
 	cb1 = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!cb1) {
-		ehea_error("no mem for cb1");
+		pr_err("no mem for cb1\n");
 		goto out;
 	}
 
 	hret = ehea_h_query_ehea_port(adapter->handle, port->logical_port_id,
 				      H_PORT_CB1, H_PORT_CB1_ALL, cb1);
 	if (hret != H_SUCCESS) {
-		ehea_error("query_ehea_port failed");
+		pr_err("query_ehea_port failed\n");
 		goto out;
 	}
 
@@ -2420,7 +2428,7 @@ static void ehea_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 	hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id,
 				       H_PORT_CB1, H_PORT_CB1_ALL, cb1);
 	if (hret != H_SUCCESS)
-		ehea_error("modify_ehea_port failed");
+		pr_err("modify_ehea_port failed\n");
 out:
 	free_page((unsigned long)cb1);
 }
@@ -2442,7 +2450,7 @@ int ehea_activate_qp(struct ehea_adapter *adapter, struct ehea_qp *qp)
 	hret = ehea_h_query_ehea_qp(adapter->handle, 0, qp->fw_handle,
 				    EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF), cb0);
 	if (hret != H_SUCCESS) {
-		ehea_error("query_ehea_qp failed (1)");
+		pr_err("query_ehea_qp failed (1)\n");
 		goto out;
 	}
 
@@ -2451,14 +2459,14 @@ int ehea_activate_qp(struct ehea_adapter *adapter, struct ehea_qp *qp)
 				     EHEA_BMASK_SET(H_QPCB0_QP_CTL_REG, 1), cb0,
 				     &dummy64, &dummy64, &dummy16, &dummy16);
 	if (hret != H_SUCCESS) {
-		ehea_error("modify_ehea_qp failed (1)");
+		pr_err("modify_ehea_qp failed (1)\n");
 		goto out;
 	}
 
 	hret = ehea_h_query_ehea_qp(adapter->handle, 0, qp->fw_handle,
 				    EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF), cb0);
 	if (hret != H_SUCCESS) {
-		ehea_error("query_ehea_qp failed (2)");
+		pr_err("query_ehea_qp failed (2)\n");
 		goto out;
 	}
 
@@ -2467,14 +2475,14 @@ int ehea_activate_qp(struct ehea_adapter *adapter, struct ehea_qp *qp)
 				     EHEA_BMASK_SET(H_QPCB0_QP_CTL_REG, 1), cb0,
 				     &dummy64, &dummy64, &dummy16, &dummy16);
 	if (hret != H_SUCCESS) {
-		ehea_error("modify_ehea_qp failed (2)");
+		pr_err("modify_ehea_qp failed (2)\n");
 		goto out;
 	}
 
 	hret = ehea_h_query_ehea_qp(adapter->handle, 0, qp->fw_handle,
 				    EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF), cb0);
 	if (hret != H_SUCCESS) {
-		ehea_error("query_ehea_qp failed (3)");
+		pr_err("query_ehea_qp failed (3)\n");
 		goto out;
 	}
 
@@ -2483,14 +2491,14 @@ int ehea_activate_qp(struct ehea_adapter *adapter, struct ehea_qp *qp)
 				     EHEA_BMASK_SET(H_QPCB0_QP_CTL_REG, 1), cb0,
 				     &dummy64, &dummy64, &dummy16, &dummy16);
 	if (hret != H_SUCCESS) {
-		ehea_error("modify_ehea_qp failed (3)");
+		pr_err("modify_ehea_qp failed (3)\n");
 		goto out;
 	}
 
 	hret = ehea_h_query_ehea_qp(adapter->handle, 0, qp->fw_handle,
 				    EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF), cb0);
 	if (hret != H_SUCCESS) {
-		ehea_error("query_ehea_qp failed (4)");
+		pr_err("query_ehea_qp failed (4)\n");
 		goto out;
 	}
 
@@ -2511,7 +2519,7 @@ static int ehea_port_res_setup(struct ehea_port *port, int def_qps,
 				   EHEA_MAX_ENTRIES_EQ, 1);
 	if (!port->qp_eq) {
 		ret = -EINVAL;
-		ehea_error("ehea_create_eq failed (qp_eq)");
+		pr_err("ehea_create_eq failed (qp_eq)\n");
 		goto out_kill_eq;
 	}
 
@@ -2592,27 +2600,27 @@ static int ehea_up(struct net_device *dev)
 	ret = ehea_port_res_setup(port, port->num_def_qps,
 				  port->num_add_tx_qps);
 	if (ret) {
-		ehea_error("port_res_failed");
+		netdev_err(dev, "port_res_failed\n");
 		goto out;
 	}
 
 	/* Set default QP for this port */
 	ret = ehea_configure_port(port);
 	if (ret) {
-		ehea_error("ehea_configure_port failed. ret:%d", ret);
+		netdev_err(dev, "ehea_configure_port failed. ret:%d\n", ret);
 		goto out_clean_pr;
 	}
 
 	ret = ehea_reg_interrupts(dev);
 	if (ret) {
-		ehea_error("reg_interrupts failed. ret:%d", ret);
+		netdev_err(dev, "reg_interrupts failed. ret:%d\n", ret);
 		goto out_clean_pr;
 	}
 
 	for (i = 0; i < port->num_def_qps + port->num_add_tx_qps; i++) {
 		ret = ehea_activate_qp(port->adapter, port->port_res[i].qp);
 		if (ret) {
-			ehea_error("activate_qp failed");
+			netdev_err(dev, "activate_qp failed\n");
 			goto out_free_irqs;
 		}
 	}
@@ -2620,7 +2628,7 @@ static int ehea_up(struct net_device *dev)
 	for (i = 0; i < port->num_def_qps; i++) {
 		ret = ehea_fill_port_res(&port->port_res[i]);
 		if (ret) {
-			ehea_error("out_free_irqs");
+			netdev_err(dev, "out_free_irqs\n");
 			goto out_free_irqs;
 		}
 	}
@@ -2643,7 +2651,7 @@ out_clean_pr:
 	ehea_clean_all_portres(port);
 out:
 	if (ret)
-		ehea_info("Failed starting %s. ret=%i", dev->name, ret);
+		netdev_info(dev, "Failed starting. ret=%i\n", ret);
 
 	ehea_update_bcmc_registrations();
 	ehea_update_firmware_handles();
@@ -2674,8 +2682,7 @@ static int ehea_open(struct net_device *dev)
 
 	mutex_lock(&port->port_lock);
 
-	if (netif_msg_ifup(port))
-		ehea_info("enabling port %s", dev->name);
+	netif_info(port, ifup, dev, "enabling port\n");
 
 	ret = ehea_up(dev);
 	if (!ret) {
@@ -2710,8 +2717,7 @@ static int ehea_down(struct net_device *dev)
 
 	ret = ehea_clean_all_portres(port);
 	if (ret)
-		ehea_info("Failed freeing resources for %s. ret=%i",
-			  dev->name, ret);
+		netdev_info(dev, "Failed freeing resources. ret=%i\n", ret);
 
 	ehea_update_firmware_handles();
 
@@ -2723,8 +2729,7 @@ static int ehea_stop(struct net_device *dev)
 	int ret;
 	struct ehea_port *port = netdev_priv(dev);
 
-	if (netif_msg_ifdown(port))
-		ehea_info("disabling port %s", dev->name);
+	netif_info(port, ifdown, dev, "disabling port\n");
 
 	set_bit(__EHEA_DISABLE_PORT_RESET, &port->flags);
 	cancel_work_sync(&port->reset_task);
@@ -2765,7 +2770,7 @@ static void ehea_flush_sq(struct ehea_port *port)
 			 msecs_to_jiffies(100));
 
 		if (!ret) {
-			ehea_error("WARNING: sq not flushed completely");
+			pr_err("WARNING: sq not flushed completely\n");
 			break;
 		}
 	}
@@ -2801,7 +2806,7 @@ int ehea_stop_qps(struct net_device *dev)
 					    EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF),
 					    cb0);
 		if (hret != H_SUCCESS) {
-			ehea_error("query_ehea_qp failed (1)");
+			pr_err("query_ehea_qp failed (1)\n");
 			goto out;
 		}
 
@@ -2813,7 +2818,7 @@ int ehea_stop_qps(struct net_device *dev)
 							    1), cb0, &dummy64,
 					     &dummy64, &dummy16, &dummy16);
 		if (hret != H_SUCCESS) {
-			ehea_error("modify_ehea_qp failed (1)");
+			pr_err("modify_ehea_qp failed (1)\n");
 			goto out;
 		}
 
@@ -2821,14 +2826,14 @@ int ehea_stop_qps(struct net_device *dev)
 					    EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF),
 					    cb0);
 		if (hret != H_SUCCESS) {
-			ehea_error("query_ehea_qp failed (2)");
+			pr_err("query_ehea_qp failed (2)\n");
 			goto out;
 		}
 
 		/* deregister shared memory regions */
 		dret = ehea_rem_smrs(pr);
 		if (dret) {
-			ehea_error("unreg shared memory region failed");
+			pr_err("unreg shared memory region failed\n");
 			goto out;
 		}
 	}
@@ -2897,7 +2902,7 @@ int ehea_restart_qps(struct net_device *dev)
 
 		ret = ehea_gen_smrs(pr);
 		if (ret) {
-			ehea_error("creation of shared memory regions failed");
+			netdev_err(dev, "creation of shared memory regions failed\n");
 			goto out;
 		}
 
@@ -2908,7 +2913,7 @@ int ehea_restart_qps(struct net_device *dev)
 					    EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF),
 					    cb0);
 		if (hret != H_SUCCESS) {
-			ehea_error("query_ehea_qp failed (1)");
+			netdev_err(dev, "query_ehea_qp failed (1)\n");
 			goto out;
 		}
 
@@ -2920,7 +2925,7 @@ int ehea_restart_qps(struct net_device *dev)
 							    1), cb0, &dummy64,
 					     &dummy64, &dummy16, &dummy16);
 		if (hret != H_SUCCESS) {
-			ehea_error("modify_ehea_qp failed (1)");
+			netdev_err(dev, "modify_ehea_qp failed (1)\n");
 			goto out;
 		}
 
@@ -2928,7 +2933,7 @@ int ehea_restart_qps(struct net_device *dev)
 					    EHEA_BMASK_SET(H_QPCB0_ALL, 0xFFFF),
 					    cb0);
 		if (hret != H_SUCCESS) {
-			ehea_error("query_ehea_qp failed (2)");
+			netdev_err(dev, "query_ehea_qp failed (2)\n");
 			goto out;
 		}
 
@@ -2965,8 +2970,7 @@ static void ehea_reset_port(struct work_struct *work)
 
 	ehea_set_multicast_list(dev);
 
-	if (netif_msg_timer(port))
-		ehea_info("Device %s resetted successfully", dev->name);
+	netif_info(port, timer, dev, "reset successful\n");
 
 	port_napi_enable(port);
 
@@ -2976,12 +2980,12 @@ out:
 	mutex_unlock(&dlpar_mem_lock);
 }
 
-static void ehea_rereg_mrs(struct work_struct *work)
+static void ehea_rereg_mrs(void)
 {
 	int ret, i;
 	struct ehea_adapter *adapter;
 
-	ehea_info("LPAR memory changed - re-initializing driver");
+	pr_info("LPAR memory changed - re-initializing driver\n");
 
 	list_for_each_entry(adapter, &adapter_list, list)
 		if (adapter->active_ports) {
@@ -3013,8 +3017,7 @@ static void ehea_rereg_mrs(struct work_struct *work)
 			/* Unregister old memory region */
 			ret = ehea_rem_mr(&adapter->mr);
 			if (ret) {
-				ehea_error("unregister MR failed - driver"
-					   " inoperable!");
+				pr_err("unregister MR failed - driver inoperable!\n");
 				goto out;
 			}
 		}
@@ -3026,8 +3029,7 @@ static void ehea_rereg_mrs(struct work_struct *work)
 			/* Register new memory region */
 			ret = ehea_reg_kernel_mr(adapter, &adapter->mr);
 			if (ret) {
-				ehea_error("register MR failed - driver"
-					   " inoperable!");
+				pr_err("register MR failed - driver inoperable!\n");
 				goto out;
 			}
 
@@ -3050,7 +3052,7 @@ static void ehea_rereg_mrs(struct work_struct *work)
 				}
 			}
 		}
-	ehea_info("re-initializing driver complete");
+	pr_info("re-initializing driver complete\n");
 out:
 	return;
 }
@@ -3103,7 +3105,7 @@ int ehea_get_jumboframe_status(struct ehea_port *port, int *jumbo)
 	/* (Try to) enable *jumbo frames */
 	cb4 = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!cb4) {
-		ehea_error("no mem for cb4");
+		pr_err("no mem for cb4\n");
 		ret = -ENOMEM;
 		goto out;
 	} else {
@@ -3165,13 +3167,13 @@ static struct device *ehea_register_port(struct ehea_port *port,
 
 	ret = of_device_register(&port->ofdev);
 	if (ret) {
-		ehea_error("failed to register device. ret=%d", ret);
+		pr_err("failed to register device. ret=%d\n", ret);
 		goto out;
 	}
 
 	ret = device_create_file(&port->ofdev.dev, &dev_attr_log_port_id);
 	if (ret) {
-		ehea_error("failed to register attributes, ret=%d", ret);
+		pr_err("failed to register attributes, ret=%d\n", ret);
 		goto out_unreg_of_dev;
 	}
 
@@ -3221,7 +3223,7 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
 	dev = alloc_etherdev(sizeof(struct ehea_port));
 
 	if (!dev) {
-		ehea_error("no mem for net_device");
+		pr_err("no mem for net_device\n");
 		ret = -ENOMEM;
 		goto out_err;
 	}
@@ -3268,11 +3270,14 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
 		      | NETIF_F_LLTX;
 	dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
 
+	if (use_lro)
+		dev->features |= NETIF_F_LRO;
+
 	INIT_WORK(&port->reset_task, ehea_reset_port);
 
 	ret = register_netdev(dev);
 	if (ret) {
-		ehea_error("register_netdev failed. ret=%d", ret);
+		pr_err("register_netdev failed. ret=%d\n", ret);
 		goto out_unreg_port;
 	}
 
@@ -3280,11 +3285,10 @@ struct ehea_port *ehea_setup_single_port(struct ehea_adapter *adapter,
 
 	ret = ehea_get_jumboframe_status(port, &jumbo);
 	if (ret)
-		ehea_error("failed determining jumbo frame status for %s",
-			   port->netdev->name);
+		netdev_err(dev, "failed determining jumbo frame status\n");
 
-	ehea_info("%s: Jumbo frames are %sabled", dev->name,
-		  jumbo == 1 ? "en" : "dis");
+	netdev_info(dev, "Jumbo frames are %sabled\n",
+		    jumbo == 1 ? "en" : "dis");
 
 	adapter->active_ports++;
 
@@ -3300,14 +3304,16 @@ out_free_ethdev:
 	free_netdev(dev);
 
 out_err:
-	ehea_error("setting up logical port with id=%d failed, ret=%d",
-		   logical_port_id, ret);
+	pr_err("setting up logical port with id=%d failed, ret=%d\n",
+	       logical_port_id, ret);
 	return NULL;
 }
 
 static void ehea_shutdown_single_port(struct ehea_port *port)
 {
 	struct ehea_adapter *adapter = port->adapter;
+
+	cancel_work_sync(&port->reset_task);
 	unregister_netdev(port->netdev);
 	ehea_unregister_port(port);
 	kfree(port->mc_list);
@@ -3329,13 +3335,13 @@ static int ehea_setup_ports(struct ehea_adapter *adapter)
 		dn_log_port_id = of_get_property(eth_dn, "ibm,hea-port-no",
 						 NULL);
 		if (!dn_log_port_id) {
-			ehea_error("bad device node: eth_dn name=%s",
-				   eth_dn->full_name);
+			pr_err("bad device node: eth_dn name=%s\n",
+			       eth_dn->full_name);
 			continue;
 		}
 
 		if (ehea_add_adapter_mr(adapter)) {
-			ehea_error("creating MR failed");
+			pr_err("creating MR failed\n");
 			of_node_put(eth_dn);
 			return -EIO;
 		}
@@ -3344,9 +3350,8 @@ static int ehea_setup_ports(struct ehea_adapter *adapter)
 							  *dn_log_port_id,
 							  eth_dn);
 		if (adapter->port[i])
-			ehea_info("%s -> logical port id #%d",
-				  adapter->port[i]->netdev->name,
-				  *dn_log_port_id);
+			netdev_info(adapter->port[i]->netdev,
+				    "logical port id #%d\n", *dn_log_port_id);
 		else
 			ehea_remove_adapter_mr(adapter);
 
@@ -3391,21 +3396,20 @@ static ssize_t ehea_probe_port(struct device *dev,
 	port = ehea_get_port(adapter, logical_port_id);
 
 	if (port) {
-		ehea_info("adding port with logical port id=%d failed. port "
-			  "already configured as %s.", logical_port_id,
-			  port->netdev->name);
+		netdev_info(port->netdev, "adding port with logical port id=%d failed: port already configured\n",
+			    logical_port_id);
 		return -EINVAL;
 	}
 
 	eth_dn = ehea_get_eth_dn(adapter, logical_port_id);
 
 	if (!eth_dn) {
-		ehea_info("no logical port with id %d found", logical_port_id);
+		pr_info("no logical port with id %d found\n", logical_port_id);
 		return -EINVAL;
 	}
 
 	if (ehea_add_adapter_mr(adapter)) {
-		ehea_error("creating MR failed");
+		pr_err("creating MR failed\n");
 		return -EIO;
 	}
 
@@ -3420,8 +3424,8 @@ static ssize_t ehea_probe_port(struct device *dev,
 				break;
 			}
 
-		ehea_info("added %s (logical port id=%d)", port->netdev->name,
-			  logical_port_id);
+		netdev_info(port->netdev, "added: (logical port id=%d)\n",
+			    logical_port_id);
 	} else {
 		ehea_remove_adapter_mr(adapter);
 		return -EIO;
@@ -3444,8 +3448,8 @@ static ssize_t ehea_remove_port(struct device *dev,
 	port = ehea_get_port(adapter, logical_port_id);
 
 	if (port) {
-		ehea_info("removed %s (logical port id=%d)", port->netdev->name,
-			  logical_port_id);
+		netdev_info(port->netdev, "removed: (logical port id=%d)\n",
+			    logical_port_id);
 
 		ehea_shutdown_single_port(port);
 
@@ -3455,8 +3459,8 @@ static ssize_t ehea_remove_port(struct device *dev,
 				break;
 			}
 	} else {
-		ehea_error("removing port with logical port id=%d failed. port "
-			   "not configured.", logical_port_id);
+		pr_err("removing port with logical port id=%d failed. port not configured.\n",
+		       logical_port_id);
 		return -EINVAL;
 	}
 
@@ -3493,7 +3497,7 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev,
 	int ret;
 
 	if (!dev || !dev->dev.of_node) {
-		ehea_error("Invalid ibmebus device probed");
+		pr_err("Invalid ibmebus device probed\n");
 		return -EINVAL;
 	}
 
@@ -3597,8 +3601,6 @@ static int __devexit ehea_remove(struct platform_device *dev)
 
 	ehea_remove_device_sysfs(dev);
 
-	flush_scheduled_work();
-
 	ibmebus_free_irq(adapter->neq->attr.ist1, adapter);
 	tasklet_kill(&adapter->neq_tasklet);
 
@@ -3641,21 +3643,21 @@ static int ehea_mem_notifier(struct notifier_block *nb,
 
 	switch (action) {
 	case MEM_CANCEL_OFFLINE:
-		ehea_info("memory offlining canceled");
+		pr_info("memory offlining canceled");
 		/* Readd canceled memory block */
 	case MEM_ONLINE:
-		ehea_info("memory is going online");
+		pr_info("memory is going online");
 		set_bit(__EHEA_STOP_XFER, &ehea_driver_flags);
 		if (ehea_add_sect_bmap(arg->start_pfn, arg->nr_pages))
 			goto out_unlock;
-		ehea_rereg_mrs(NULL);
+		ehea_rereg_mrs();
 		break;
 	case MEM_GOING_OFFLINE:
-		ehea_info("memory is going offline");
+		pr_info("memory is going offline");
 		set_bit(__EHEA_STOP_XFER, &ehea_driver_flags);
 		if (ehea_rem_sect_bmap(arg->start_pfn, arg->nr_pages))
 			goto out_unlock;
-		ehea_rereg_mrs(NULL);
+		ehea_rereg_mrs();
 		break;
 	default:
 		break;
@@ -3677,7 +3679,7 @@ static int ehea_reboot_notifier(struct notifier_block *nb,
 				unsigned long action, void *unused)
 {
 	if (action == SYS_RESTART) {
-		ehea_info("Reboot: freeing all eHEA resources");
+		pr_info("Reboot: freeing all eHEA resources\n");
 		ibmebus_unregister_driver(&ehea_driver);
 	}
 	return NOTIFY_DONE;
@@ -3693,22 +3695,22 @@ static int check_module_parm(void)
 
 	if ((rq1_entries < EHEA_MIN_ENTRIES_QP) ||
 	    (rq1_entries > EHEA_MAX_ENTRIES_RQ1)) {
-		ehea_info("Bad parameter: rq1_entries");
+		pr_info("Bad parameter: rq1_entries\n");
 		ret = -EINVAL;
 	}
 	if ((rq2_entries < EHEA_MIN_ENTRIES_QP) ||
 	    (rq2_entries > EHEA_MAX_ENTRIES_RQ2)) {
-		ehea_info("Bad parameter: rq2_entries");
+		pr_info("Bad parameter: rq2_entries\n");
 		ret = -EINVAL;
 	}
 	if ((rq3_entries < EHEA_MIN_ENTRIES_QP) ||
 	    (rq3_entries > EHEA_MAX_ENTRIES_RQ3)) {
-		ehea_info("Bad parameter: rq3_entries");
+		pr_info("Bad parameter: rq3_entries\n");
 		ret = -EINVAL;
 	}
 	if ((sq_entries < EHEA_MIN_ENTRIES_QP) ||
 	    (sq_entries > EHEA_MAX_ENTRIES_SQ)) {
-		ehea_info("Bad parameter: sq_entries");
+		pr_info("Bad parameter: sq_entries\n");
 		ret = -EINVAL;
 	}
 
@@ -3728,11 +3730,8 @@ int __init ehea_module_init(void)
 {
 	int ret;
 
-	printk(KERN_INFO "IBM eHEA ethernet device driver (Release %s)\n",
-	       DRV_VERSION);
-
+	pr_info("IBM eHEA ethernet device driver (Release %s)\n", DRV_VERSION);
 
-	INIT_WORK(&ehea_rereg_mr_task, ehea_rereg_mrs);
 	memset(&ehea_fw_handles, 0, sizeof(ehea_fw_handles));
 	memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs));
 
@@ -3749,27 +3748,27 @@ int __init ehea_module_init(void)
 
 	ret = register_reboot_notifier(&ehea_reboot_nb);
 	if (ret)
-		ehea_info("failed registering reboot notifier");
+		pr_info("failed registering reboot notifier\n");
 
 	ret = register_memory_notifier(&ehea_mem_nb);
 	if (ret)
-		ehea_info("failed registering memory remove notifier");
+		pr_info("failed registering memory remove notifier\n");
 
 	ret = crash_shutdown_register(ehea_crash_handler);
 	if (ret)
-		ehea_info("failed registering crash handler");
+		pr_info("failed registering crash handler\n");
 
 	ret = ibmebus_register_driver(&ehea_driver);
 	if (ret) {
-		ehea_error("failed registering eHEA device driver on ebus");
+		pr_err("failed registering eHEA device driver on ebus\n");
 		goto out2;
 	}
 
 	ret = driver_create_file(&ehea_driver.driver,
 				 &driver_attr_capabilities);
 	if (ret) {
-		ehea_error("failed to register capabilities attribute, ret=%d",
-			   ret);
+		pr_err("failed to register capabilities attribute, ret=%d\n",
+		       ret);
 		goto out3;
 	}
 
@@ -3789,13 +3788,12 @@ static void __exit ehea_module_exit(void)
 {
 	int ret;
 
-	flush_scheduled_work();
 	driver_remove_file(&ehea_driver.driver, &driver_attr_capabilities);
 	ibmebus_unregister_driver(&ehea_driver);
 	unregister_reboot_notifier(&ehea_reboot_nb);
 	ret = crash_shutdown_unregister(ehea_crash_handler);
 	if (ret)
-		ehea_info("failed unregistering crash handler");
+		pr_info("failed unregistering crash handler\n");
 	unregister_memory_notifier(&ehea_mem_nb);
 	kfree(ehea_fw_handles.arr);
 	kfree(ehea_bcmc_regs.arr);
diff --git a/drivers/net/ehea/ehea_phyp.c b/drivers/net/ehea/ehea_phyp.c
index 8fe9dcaa753..0506967b904 100644
--- a/drivers/net/ehea/ehea_phyp.c
+++ b/drivers/net/ehea/ehea_phyp.c
@@ -26,6 +26,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "ehea_phyp.h"
 
 
@@ -67,12 +69,11 @@ static long ehea_plpar_hcall_norets(unsigned long opcode,
 		}
 
 		if (ret < H_SUCCESS)
-			ehea_error("opcode=%lx ret=%lx"
-				   " arg1=%lx arg2=%lx arg3=%lx arg4=%lx"
-				   " arg5=%lx arg6=%lx arg7=%lx ",
-				   opcode, ret,
-				   arg1, arg2, arg3, arg4, arg5,
-				   arg6, arg7);
+			pr_err("opcode=%lx ret=%lx"
+			       " arg1=%lx arg2=%lx arg3=%lx arg4=%lx"
+			       " arg5=%lx arg6=%lx arg7=%lx\n",
+			       opcode, ret,
+			       arg1, arg2, arg3, arg4, arg5, arg6, arg7);
 
 		return ret;
 	}
@@ -114,19 +115,18 @@ static long ehea_plpar_hcall9(unsigned long opcode,
 		    && (((cb_cat == H_PORT_CB4) && ((arg3 == H_PORT_CB4_JUMBO)
 		    || (arg3 == H_PORT_CB4_SPEED))) || ((cb_cat == H_PORT_CB7)
 		    && (arg3 == H_PORT_CB7_DUCQPN)))))
-			ehea_error("opcode=%lx ret=%lx"
-				   " arg1=%lx arg2=%lx arg3=%lx arg4=%lx"
-				   " arg5=%lx arg6=%lx arg7=%lx arg8=%lx"
-				   " arg9=%lx"
-				   " out1=%lx out2=%lx out3=%lx out4=%lx"
-				   " out5=%lx out6=%lx out7=%lx out8=%lx"
-				   " out9=%lx",
-				   opcode, ret,
-				   arg1, arg2, arg3, arg4, arg5,
-				   arg6, arg7, arg8, arg9,
-				   outs[0], outs[1], outs[2], outs[3],
-				   outs[4], outs[5], outs[6], outs[7],
-				   outs[8]);
+			pr_err("opcode=%lx ret=%lx"
+			       " arg1=%lx arg2=%lx arg3=%lx arg4=%lx"
+			       " arg5=%lx arg6=%lx arg7=%lx arg8=%lx"
+			       " arg9=%lx"
+			       " out1=%lx out2=%lx out3=%lx out4=%lx"
+			       " out5=%lx out6=%lx out7=%lx out8=%lx"
+			       " out9=%lx\n",
+			       opcode, ret,
+			       arg1, arg2, arg3, arg4, arg5,
+			       arg6, arg7, arg8, arg9,
+			       outs[0], outs[1], outs[2], outs[3], outs[4],
+			       outs[5], outs[6], outs[7], outs[8]);
 		return ret;
 	}
 
@@ -515,7 +515,7 @@ u64 ehea_h_register_rpage_mr(const u64 adapter_handle, const u64 mr_handle,
 			     const u64 log_pageaddr, const u64 count)
 {
 	if ((count > 1) && (log_pageaddr & ~PAGE_MASK)) {
-		ehea_error("not on pageboundary");
+		pr_err("not on pageboundary\n");
 		return H_PARAMETER;
 	}
 
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index 89128b6373e..cd44bb8017d 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -26,6 +26,8 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include "ehea.h"
@@ -45,7 +47,7 @@ static void *hw_qpageit_get_inc(struct hw_queue *queue)
 		queue->current_q_offset -= queue->pagesize;
 		retvalue = NULL;
 	} else if (((u64) retvalue) & (EHEA_PAGESIZE-1)) {
-		ehea_error("not on pageboundary");
+		pr_err("not on pageboundary\n");
 		retvalue = NULL;
 	}
 	return retvalue;
@@ -58,15 +60,15 @@ static int hw_queue_ctor(struct hw_queue *queue, const u32 nr_of_pages,
 	int i, k;
 
 	if ((pagesize > PAGE_SIZE) || (!pages_per_kpage)) {
-		ehea_error("pagesize conflict! kernel pagesize=%d, "
-			   "ehea pagesize=%d", (int)PAGE_SIZE, (int)pagesize);
+		pr_err("pagesize conflict! kernel pagesize=%d, ehea pagesize=%d\n",
+		       (int)PAGE_SIZE, (int)pagesize);
 		return -EINVAL;
 	}
 
 	queue->queue_length = nr_of_pages * pagesize;
 	queue->queue_pages = kmalloc(nr_of_pages * sizeof(void *), GFP_KERNEL);
 	if (!queue->queue_pages) {
-		ehea_error("no mem for queue_pages");
+		pr_err("no mem for queue_pages\n");
 		return -ENOMEM;
 	}
 
@@ -130,7 +132,7 @@ struct ehea_cq *ehea_create_cq(struct ehea_adapter *adapter,
 
 	cq = kzalloc(sizeof(*cq), GFP_KERNEL);
 	if (!cq) {
-		ehea_error("no mem for cq");
+		pr_err("no mem for cq\n");
 		goto out_nomem;
 	}
 
@@ -147,7 +149,7 @@ struct ehea_cq *ehea_create_cq(struct ehea_adapter *adapter,
 	hret = ehea_h_alloc_resource_cq(adapter->handle, &cq->attr,
 					&cq->fw_handle, &cq->epas);
 	if (hret != H_SUCCESS) {
-		ehea_error("alloc_resource_cq failed");
+		pr_err("alloc_resource_cq failed\n");
 		goto out_freemem;
 	}
 
@@ -159,7 +161,7 @@ struct ehea_cq *ehea_create_cq(struct ehea_adapter *adapter,
 	for (counter = 0; counter < cq->attr.nr_pages; counter++) {
 		vpage = hw_qpageit_get_inc(&cq->hw_queue);
 		if (!vpage) {
-			ehea_error("hw_qpageit_get_inc failed");
+			pr_err("hw_qpageit_get_inc failed\n");
 			goto out_kill_hwq;
 		}
 
@@ -168,9 +170,8 @@ struct ehea_cq *ehea_create_cq(struct ehea_adapter *adapter,
 					     0, EHEA_CQ_REGISTER_ORIG,
 					     cq->fw_handle, rpage, 1);
 		if (hret < H_SUCCESS) {
-			ehea_error("register_rpage_cq failed ehea_cq=%p "
-				   "hret=%llx counter=%i act_pages=%i",
-				   cq, hret, counter, cq->attr.nr_pages);
+			pr_err("register_rpage_cq failed ehea_cq=%p hret=%llx counter=%i act_pages=%i\n",
+			       cq, hret, counter, cq->attr.nr_pages);
 			goto out_kill_hwq;
 		}
 
@@ -178,14 +179,14 @@ struct ehea_cq *ehea_create_cq(struct ehea_adapter *adapter,
 			vpage = hw_qpageit_get_inc(&cq->hw_queue);
 
 			if ((hret != H_SUCCESS) || (vpage)) {
-				ehea_error("registration of pages not "
-					   "complete hret=%llx\n", hret);
+				pr_err("registration of pages not complete hret=%llx\n",
+				       hret);
 				goto out_kill_hwq;
 			}
 		} else {
 			if (hret != H_PAGE_REGISTERED) {
-				ehea_error("CQ: registration of page failed "
-					   "hret=%llx\n", hret);
+				pr_err("CQ: registration of page failed hret=%llx\n",
+				       hret);
 				goto out_kill_hwq;
 			}
 		}
@@ -241,7 +242,7 @@ int ehea_destroy_cq(struct ehea_cq *cq)
 	}
 
 	if (hret != H_SUCCESS) {
-		ehea_error("destroy CQ failed");
+		pr_err("destroy CQ failed\n");
 		return -EIO;
 	}
 
@@ -259,7 +260,7 @@ struct ehea_eq *ehea_create_eq(struct ehea_adapter *adapter,
 
 	eq = kzalloc(sizeof(*eq), GFP_KERNEL);
 	if (!eq) {
-		ehea_error("no mem for eq");
+		pr_err("no mem for eq\n");
 		return NULL;
 	}
 
@@ -272,21 +273,21 @@ struct ehea_eq *ehea_create_eq(struct ehea_adapter *adapter,
 	hret = ehea_h_alloc_resource_eq(adapter->handle,
 					&eq->attr, &eq->fw_handle);
 	if (hret != H_SUCCESS) {
-		ehea_error("alloc_resource_eq failed");
+		pr_err("alloc_resource_eq failed\n");
 		goto out_freemem;
 	}
 
 	ret = hw_queue_ctor(&eq->hw_queue, eq->attr.nr_pages,
 			    EHEA_PAGESIZE, sizeof(struct ehea_eqe));
 	if (ret) {
-		ehea_error("can't allocate eq pages");
+		pr_err("can't allocate eq pages\n");
 		goto out_freeres;
 	}
 
 	for (i = 0; i < eq->attr.nr_pages; i++) {
 		vpage = hw_qpageit_get_inc(&eq->hw_queue);
 		if (!vpage) {
-			ehea_error("hw_qpageit_get_inc failed");
+			pr_err("hw_qpageit_get_inc failed\n");
 			hret = H_RESOURCE;
 			goto out_kill_hwq;
 		}
@@ -370,7 +371,7 @@ int ehea_destroy_eq(struct ehea_eq *eq)
 	}
 
 	if (hret != H_SUCCESS) {
-		ehea_error("destroy EQ failed");
+		pr_err("destroy EQ failed\n");
 		return -EIO;
 	}
 
@@ -395,7 +396,7 @@ int ehea_qp_alloc_register(struct ehea_qp *qp, struct hw_queue *hw_queue,
 	for (cnt = 0; cnt < nr_pages; cnt++) {
 		vpage = hw_qpageit_get_inc(hw_queue);
 		if (!vpage) {
-			ehea_error("hw_qpageit_get_inc failed");
+			pr_err("hw_qpageit_get_inc failed\n");
 			goto out_kill_hwq;
 		}
 		rpage = virt_to_abs(vpage);
@@ -403,7 +404,7 @@ int ehea_qp_alloc_register(struct ehea_qp *qp, struct hw_queue *hw_queue,
 					     0, h_call_q_selector,
 					     qp->fw_handle, rpage, 1);
 		if (hret < H_SUCCESS) {
-			ehea_error("register_rpage_qp failed");
+			pr_err("register_rpage_qp failed\n");
 			goto out_kill_hwq;
 		}
 	}
@@ -432,7 +433,7 @@ struct ehea_qp *ehea_create_qp(struct ehea_adapter *adapter,
 
 	qp = kzalloc(sizeof(*qp), GFP_KERNEL);
 	if (!qp) {
-		ehea_error("no mem for qp");
+		pr_err("no mem for qp\n");
 		return NULL;
 	}
 
@@ -441,7 +442,7 @@ struct ehea_qp *ehea_create_qp(struct ehea_adapter *adapter,
 	hret = ehea_h_alloc_resource_qp(adapter->handle, init_attr, pd,
 					&qp->fw_handle, &qp->epas);
 	if (hret != H_SUCCESS) {
-		ehea_error("ehea_h_alloc_resource_qp failed");
+		pr_err("ehea_h_alloc_resource_qp failed\n");
 		goto out_freemem;
 	}
 
@@ -455,7 +456,7 @@ struct ehea_qp *ehea_create_qp(struct ehea_adapter *adapter,
 				     init_attr->act_wqe_size_enc_sq, adapter,
 				     0);
 	if (ret) {
-		ehea_error("can't register for sq ret=%x", ret);
+		pr_err("can't register for sq ret=%x\n", ret);
 		goto out_freeres;
 	}
 
@@ -465,7 +466,7 @@ struct ehea_qp *ehea_create_qp(struct ehea_adapter *adapter,
 				     init_attr->act_wqe_size_enc_rq1,
 				     adapter, 1);
 	if (ret) {
-		ehea_error("can't register for rq1 ret=%x", ret);
+		pr_err("can't register for rq1 ret=%x\n", ret);
 		goto out_kill_hwsq;
 	}
 
@@ -476,7 +477,7 @@ struct ehea_qp *ehea_create_qp(struct ehea_adapter *adapter,
 					     init_attr->act_wqe_size_enc_rq2,
 					     adapter, 2);
 		if (ret) {
-			ehea_error("can't register for rq2 ret=%x", ret);
+			pr_err("can't register for rq2 ret=%x\n", ret);
 			goto out_kill_hwr1q;
 		}
 	}
@@ -488,7 +489,7 @@ struct ehea_qp *ehea_create_qp(struct ehea_adapter *adapter,
 					     init_attr->act_wqe_size_enc_rq3,
 					     adapter, 3);
 		if (ret) {
-			ehea_error("can't register for rq3 ret=%x", ret);
+			pr_err("can't register for rq3 ret=%x\n", ret);
 			goto out_kill_hwr2q;
 		}
 	}
@@ -553,7 +554,7 @@ int ehea_destroy_qp(struct ehea_qp *qp)
 	}
 
 	if (hret != H_SUCCESS) {
-		ehea_error("destroy QP failed");
+		pr_err("destroy QP failed\n");
 		return -EIO;
 	}
 
@@ -842,7 +843,7 @@ static u64 ehea_reg_mr_section(int top, int dir, int idx, u64 *pt,
 		    (hret != H_PAGE_REGISTERED)) {
 			ehea_h_free_resource(adapter->handle, mr->handle,
 					     FORCE_FREE);
-			ehea_error("register_rpage_mr failed");
+			pr_err("register_rpage_mr failed\n");
 			return hret;
 		}
 	}
@@ -896,7 +897,7 @@ int ehea_reg_kernel_mr(struct ehea_adapter *adapter, struct ehea_mr *mr)
 
 	pt = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!pt) {
-		ehea_error("no mem");
+		pr_err("no mem\n");
 		ret = -ENOMEM;
 		goto out;
 	}
@@ -906,14 +907,14 @@ int ehea_reg_kernel_mr(struct ehea_adapter *adapter, struct ehea_mr *mr)
 					&mr->handle, &mr->lkey);
 
 	if (hret != H_SUCCESS) {
-		ehea_error("alloc_resource_mr failed");
+		pr_err("alloc_resource_mr failed\n");
 		ret = -EIO;
 		goto out;
 	}
 
 	if (!ehea_bmap) {
 		ehea_h_free_resource(adapter->handle, mr->handle, FORCE_FREE);
-		ehea_error("no busmap available");
+		pr_err("no busmap available\n");
 		ret = -EIO;
 		goto out;
 	}
@@ -929,7 +930,7 @@ int ehea_reg_kernel_mr(struct ehea_adapter *adapter, struct ehea_mr *mr)
 
 	if (hret != H_SUCCESS) {
 		ehea_h_free_resource(adapter->handle, mr->handle, FORCE_FREE);
-		ehea_error("registering mr failed");
+		pr_err("registering mr failed\n");
 		ret = -EIO;
 		goto out;
 	}
@@ -952,7 +953,7 @@ int ehea_rem_mr(struct ehea_mr *mr)
 	hret = ehea_h_free_resource(mr->adapter->handle, mr->handle,
 				    FORCE_FREE);
 	if (hret != H_SUCCESS) {
-		ehea_error("destroy MR failed");
+		pr_err("destroy MR failed\n");
 		return -EIO;
 	}
 
@@ -987,14 +988,14 @@ void print_error_data(u64 *data)
 		length = EHEA_PAGESIZE;
 
 	if (type == EHEA_AER_RESTYPE_QP)
-		ehea_error("QP (resource=%llX) state: AER=0x%llX, AERR=0x%llX, "
-			   "port=%llX", resource, data[6], data[12], data[22]);
+		pr_err("QP (resource=%llX) state: AER=0x%llX, AERR=0x%llX, port=%llX\n",
+		       resource, data[6], data[12], data[22]);
 	else if (type == EHEA_AER_RESTYPE_CQ)
-		ehea_error("CQ (resource=%llX) state: AER=0x%llX", resource,
-			   data[6]);
+		pr_err("CQ (resource=%llX) state: AER=0x%llX\n",
+		       resource, data[6]);
 	else if (type == EHEA_AER_RESTYPE_EQ)
-		ehea_error("EQ (resource=%llX) state: AER=0x%llX", resource,
-			   data[6]);
+		pr_err("EQ (resource=%llX) state: AER=0x%llX\n",
+		       resource, data[6]);
 
 	ehea_dump(data, length, "error data");
 }
@@ -1008,7 +1009,7 @@ u64 ehea_error_data(struct ehea_adapter *adapter, u64 res_handle,
 
 	rblock = (void *)get_zeroed_page(GFP_KERNEL);
 	if (!rblock) {
-		ehea_error("Cannot allocate rblock memory.");
+		pr_err("Cannot allocate rblock memory\n");
 		goto out;
 	}
 
@@ -1020,9 +1021,9 @@ u64 ehea_error_data(struct ehea_adapter *adapter, u64 res_handle,
 		*aerr = rblock[12];
 		print_error_data(rblock);
 	} else if (ret == H_R_STATE) {
-		ehea_error("No error data available: %llX.", res_handle);
+		pr_err("No error data available: %llX\n", res_handle);
 	} else
-		ehea_error("Error data could not be fetched: %llX", res_handle);
+		pr_err("Error data could not be fetched: %llX\n", res_handle);
 
 	free_page((unsigned long)rblock);
 out:
diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index c91d364c552..a937f49d9db 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -32,7 +32,7 @@
 
 #define DRV_NAME		"enic"
 #define DRV_DESCRIPTION		"Cisco VIC Ethernet NIC Driver"
-#define DRV_VERSION		"1.4.1.6"
+#define DRV_VERSION		"1.4.1.10"
 #define DRV_COPYRIGHT		"Copyright 2008-2010 Cisco Systems, Inc"
 
 #define ENIC_BARS_MAX		6
@@ -61,6 +61,8 @@ struct enic_port_profile {
 	char name[PORT_PROFILE_MAX];
 	u8 instance_uuid[PORT_UUID_MAX];
 	u8 host_uuid[PORT_UUID_MAX];
+	u8 vf_mac[ETH_ALEN];
+	u8 mac_addr[ETH_ALEN];
 };
 
 /* Per-instance private data structure */
@@ -78,8 +80,10 @@ struct enic {
 	spinlock_t devcmd_lock;
 	u8 mac_addr[ETH_ALEN];
 	u8 mc_addr[ENIC_MULTICAST_PERFECT_FILTERS][ETH_ALEN];
+	u8 uc_addr[ENIC_UNICAST_PERFECT_FILTERS][ETH_ALEN];
 	unsigned int flags;
 	unsigned int mc_count;
+	unsigned int uc_count;
 	int csum_rx_enabled;
 	u32 port_mtu;
 	u32 rx_coalesce_usecs;
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index a466ef91dd4..a0af48c51fb 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -702,7 +702,7 @@ static inline void enic_queue_wq_skb_csum_l4(struct enic *enic,
 {
 	unsigned int head_len = skb_headlen(skb);
 	unsigned int len_left = skb->len - head_len;
-	unsigned int hdr_len = skb_transport_offset(skb);
+	unsigned int hdr_len = skb_checksum_start_offset(skb);
 	unsigned int csum_offset = hdr_len + skb->csum_offset;
 	int eop = (len_left == 0);
 
@@ -1002,7 +1002,7 @@ static int enic_dev_packet_filter(struct enic *enic, int directed,
 	return err;
 }
 
-static int enic_dev_add_multicast_addr(struct enic *enic, u8 *addr)
+static int enic_dev_add_addr(struct enic *enic, u8 *addr)
 {
 	int err;
 
@@ -1013,7 +1013,7 @@ static int enic_dev_add_multicast_addr(struct enic *enic, u8 *addr)
 	return err;
 }
 
-static int enic_dev_del_multicast_addr(struct enic *enic, u8 *addr)
+static int enic_dev_del_addr(struct enic *enic, u8 *addr)
 {
 	int err;
 
@@ -1024,29 +1024,19 @@ static int enic_dev_del_multicast_addr(struct enic *enic, u8 *addr)
 	return err;
 }
 
-/* netif_tx_lock held, BHs disabled */
-static void enic_set_multicast_list(struct net_device *netdev)
+static void enic_add_multicast_addr_list(struct enic *enic)
 {
-	struct enic *enic = netdev_priv(netdev);
+	struct net_device *netdev = enic->netdev;
 	struct netdev_hw_addr *ha;
-	int directed = 1;
-	int multicast = (netdev->flags & IFF_MULTICAST) ? 1 : 0;
-	int broadcast = (netdev->flags & IFF_BROADCAST) ? 1 : 0;
-	int promisc = (netdev->flags & IFF_PROMISC) ? 1 : 0;
 	unsigned int mc_count = netdev_mc_count(netdev);
-	int allmulti = (netdev->flags & IFF_ALLMULTI) ||
-		mc_count > ENIC_MULTICAST_PERFECT_FILTERS;
-	unsigned int flags = netdev->flags | (allmulti ? IFF_ALLMULTI : 0);
 	u8 mc_addr[ENIC_MULTICAST_PERFECT_FILTERS][ETH_ALEN];
 	unsigned int i, j;
 
-	if (mc_count > ENIC_MULTICAST_PERFECT_FILTERS)
+	if (mc_count > ENIC_MULTICAST_PERFECT_FILTERS) {
+		netdev_warn(netdev, "Registering only %d out of %d "
+			"multicast addresses\n",
+			ENIC_MULTICAST_PERFECT_FILTERS, mc_count);
 		mc_count = ENIC_MULTICAST_PERFECT_FILTERS;
-
-	if (enic->flags != flags) {
-		enic->flags = flags;
-		enic_dev_packet_filter(enic, directed,
-			multicast, broadcast, promisc, allmulti);
 	}
 
 	/* Is there an easier way?  Trying to minimize to
@@ -1068,7 +1058,7 @@ static void enic_set_multicast_list(struct net_device *netdev)
 				mc_addr[j]) == 0)
 				break;
 		if (j == mc_count)
-			enic_dev_del_multicast_addr(enic, enic->mc_addr[i]);
+			enic_dev_del_addr(enic, enic->mc_addr[i]);
 	}
 
 	for (i = 0; i < mc_count; i++) {
@@ -1077,7 +1067,7 @@ static void enic_set_multicast_list(struct net_device *netdev)
 				enic->mc_addr[j]) == 0)
 				break;
 		if (j == enic->mc_count)
-			enic_dev_add_multicast_addr(enic, mc_addr[i]);
+			enic_dev_add_addr(enic, mc_addr[i]);
 	}
 
 	/* Save the list to compare against next time
@@ -1089,6 +1079,89 @@ static void enic_set_multicast_list(struct net_device *netdev)
 	enic->mc_count = mc_count;
 }
 
+static void enic_add_unicast_addr_list(struct enic *enic)
+{
+	struct net_device *netdev = enic->netdev;
+	struct netdev_hw_addr *ha;
+	unsigned int uc_count = netdev_uc_count(netdev);
+	u8 uc_addr[ENIC_UNICAST_PERFECT_FILTERS][ETH_ALEN];
+	unsigned int i, j;
+
+	if (uc_count > ENIC_UNICAST_PERFECT_FILTERS) {
+		netdev_warn(netdev, "Registering only %d out of %d "
+			"unicast addresses\n",
+			ENIC_UNICAST_PERFECT_FILTERS, uc_count);
+		uc_count = ENIC_UNICAST_PERFECT_FILTERS;
+	}
+
+	/* Is there an easier way?  Trying to minimize to
+	 * calls to add/del unicast addrs.  We keep the
+	 * addrs from the last call in enic->uc_addr and
+	 * look for changes to add/del.
+	 */
+
+	i = 0;
+	netdev_for_each_uc_addr(ha, netdev) {
+		if (i == uc_count)
+			break;
+		memcpy(uc_addr[i++], ha->addr, ETH_ALEN);
+	}
+
+	for (i = 0; i < enic->uc_count; i++) {
+		for (j = 0; j < uc_count; j++)
+			if (compare_ether_addr(enic->uc_addr[i],
+				uc_addr[j]) == 0)
+				break;
+		if (j == uc_count)
+			enic_dev_del_addr(enic, enic->uc_addr[i]);
+	}
+
+	for (i = 0; i < uc_count; i++) {
+		for (j = 0; j < enic->uc_count; j++)
+			if (compare_ether_addr(uc_addr[i],
+				enic->uc_addr[j]) == 0)
+				break;
+		if (j == enic->uc_count)
+			enic_dev_add_addr(enic, uc_addr[i]);
+	}
+
+	/* Save the list to compare against next time
+	 */
+
+	for (i = 0; i < uc_count; i++)
+		memcpy(enic->uc_addr[i], uc_addr[i], ETH_ALEN);
+
+	enic->uc_count = uc_count;
+}
+
+/* netif_tx_lock held, BHs disabled */
+static void enic_set_rx_mode(struct net_device *netdev)
+{
+	struct enic *enic = netdev_priv(netdev);
+	int directed = 1;
+	int multicast = (netdev->flags & IFF_MULTICAST) ? 1 : 0;
+	int broadcast = (netdev->flags & IFF_BROADCAST) ? 1 : 0;
+	int promisc = (netdev->flags & IFF_PROMISC) ||
+		netdev_uc_count(netdev) > ENIC_UNICAST_PERFECT_FILTERS;
+	int allmulti = (netdev->flags & IFF_ALLMULTI) ||
+		netdev_mc_count(netdev) > ENIC_MULTICAST_PERFECT_FILTERS;
+	unsigned int flags = netdev->flags |
+		(allmulti ? IFF_ALLMULTI : 0) |
+		(promisc ? IFF_PROMISC : 0);
+
+	if (enic->flags != flags) {
+		enic->flags = flags;
+		enic_dev_packet_filter(enic, directed,
+			multicast, broadcast, promisc, allmulti);
+	}
+
+	if (!promisc) {
+		enic_add_unicast_addr_list(enic);
+		if (!allmulti)
+			enic_add_multicast_addr_list(enic);
+	}
+}
+
 /* rtnl lock is held */
 static void enic_vlan_rx_register(struct net_device *netdev,
 	struct vlan_group *vlan_group)
@@ -1158,11 +1231,31 @@ static int enic_dev_init_done(struct enic *enic, int *done, int *error)
 	return err;
 }
 
+static int enic_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+	struct enic *enic = netdev_priv(netdev);
+
+	if (vf != PORT_SELF_VF)
+		return -EOPNOTSUPP;
+
+	/* Ignore the vf argument for now. We can assume the request
+	 * is coming on a vf.
+	 */
+	if (is_valid_ether_addr(mac)) {
+		memcpy(enic->pp.vf_mac, mac, ETH_ALEN);
+		return 0;
+	} else
+		return -EINVAL;
+}
+
 static int enic_set_port_profile(struct enic *enic, u8 *mac)
 {
 	struct vic_provinfo *vp;
 	u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
+	u16 os_type = VIC_GENERIC_PROV_OS_TYPE_LINUX;
 	char uuid_str[38];
+	char client_mac_str[18];
+	u8 *client_mac;
 	int err;
 
 	err = enic_vnic_dev_deinit(enic);
@@ -1180,46 +1273,63 @@ static int enic_set_port_profile(struct enic *enic, u8 *mac)
 			return -EADDRNOTAVAIL;
 
 		vp = vic_provinfo_alloc(GFP_KERNEL, oui,
-			VIC_PROVINFO_LINUX_TYPE);
+			VIC_PROVINFO_GENERIC_TYPE);
 		if (!vp)
 			return -ENOMEM;
 
 		vic_provinfo_add_tlv(vp,
-			VIC_LINUX_PROV_TLV_PORT_PROFILE_NAME_STR,
+			VIC_GENERIC_PROV_TLV_PORT_PROFILE_NAME_STR,
 			strlen(enic->pp.name) + 1, enic->pp.name);
 
+		if (!is_zero_ether_addr(enic->pp.mac_addr))
+			client_mac = enic->pp.mac_addr;
+		else
+			client_mac = mac;
+
+		vic_provinfo_add_tlv(vp,
+			VIC_GENERIC_PROV_TLV_CLIENT_MAC_ADDR,
+			ETH_ALEN, client_mac);
+
+		sprintf(client_mac_str, "%pM", client_mac);
 		vic_provinfo_add_tlv(vp,
-			VIC_LINUX_PROV_TLV_CLIENT_MAC_ADDR,
-			ETH_ALEN, mac);
+			VIC_GENERIC_PROV_TLV_CLUSTER_PORT_UUID_STR,
+			sizeof(client_mac_str), client_mac_str);
 
 		if (enic->pp.set & ENIC_SET_INSTANCE) {
 			sprintf(uuid_str, "%pUB", enic->pp.instance_uuid);
 			vic_provinfo_add_tlv(vp,
-				VIC_LINUX_PROV_TLV_CLIENT_UUID_STR,
+				VIC_GENERIC_PROV_TLV_CLIENT_UUID_STR,
 				sizeof(uuid_str), uuid_str);
 		}
 
 		if (enic->pp.set & ENIC_SET_HOST) {
 			sprintf(uuid_str, "%pUB", enic->pp.host_uuid);
 			vic_provinfo_add_tlv(vp,
-				VIC_LINUX_PROV_TLV_HOST_UUID_STR,
+				VIC_GENERIC_PROV_TLV_HOST_UUID_STR,
 				sizeof(uuid_str), uuid_str);
 		}
 
+		os_type = htons(os_type);
+		vic_provinfo_add_tlv(vp,
+			VIC_GENERIC_PROV_TLV_OS_TYPE,
+			sizeof(os_type), &os_type);
+
 		err = enic_dev_init_prov(enic, vp);
 		vic_provinfo_free(vp);
 		if (err)
 			return err;
+
+		enic->pp.set |= ENIC_SET_APPLIED;
 		break;
 
 	case PORT_REQUEST_DISASSOCIATE:
+		enic->pp.set &= ~ENIC_SET_APPLIED;
 		break;
 
 	default:
 		return -EINVAL;
 	}
 
-	enic->pp.set |= ENIC_SET_APPLIED;
 	return 0;
 }
 
@@ -1227,29 +1337,31 @@ static int enic_set_vf_port(struct net_device *netdev, int vf,
 	struct nlattr *port[])
 {
 	struct enic *enic = netdev_priv(netdev);
+	struct enic_port_profile new_pp;
+	int err = 0;
 
-	memset(&enic->pp, 0, sizeof(enic->pp));
+	memset(&new_pp, 0, sizeof(new_pp));
 
 	if (port[IFLA_PORT_REQUEST]) {
-		enic->pp.set |= ENIC_SET_REQUEST;
-		enic->pp.request = nla_get_u8(port[IFLA_PORT_REQUEST]);
+		new_pp.set |= ENIC_SET_REQUEST;
+		new_pp.request = nla_get_u8(port[IFLA_PORT_REQUEST]);
 	}
 
 	if (port[IFLA_PORT_PROFILE]) {
-		enic->pp.set |= ENIC_SET_NAME;
-		memcpy(enic->pp.name, nla_data(port[IFLA_PORT_PROFILE]),
+		new_pp.set |= ENIC_SET_NAME;
+		memcpy(new_pp.name, nla_data(port[IFLA_PORT_PROFILE]),
 			PORT_PROFILE_MAX);
 	}
 
 	if (port[IFLA_PORT_INSTANCE_UUID]) {
-		enic->pp.set |= ENIC_SET_INSTANCE;
-		memcpy(enic->pp.instance_uuid,
+		new_pp.set |= ENIC_SET_INSTANCE;
+		memcpy(new_pp.instance_uuid,
 			nla_data(port[IFLA_PORT_INSTANCE_UUID]), PORT_UUID_MAX);
 	}
 
 	if (port[IFLA_PORT_HOST_UUID]) {
-		enic->pp.set |= ENIC_SET_HOST;
-		memcpy(enic->pp.host_uuid,
+		new_pp.set |= ENIC_SET_HOST;
+		memcpy(new_pp.host_uuid,
 			nla_data(port[IFLA_PORT_HOST_UUID]), PORT_UUID_MAX);
 	}
 
@@ -1257,21 +1369,39 @@ static int enic_set_vf_port(struct net_device *netdev, int vf,
 	if (vf != PORT_SELF_VF)
 		return -EOPNOTSUPP;
 
-	if (!(enic->pp.set & ENIC_SET_REQUEST))
+	if (!(new_pp.set & ENIC_SET_REQUEST))
 		return -EOPNOTSUPP;
 
-	if (enic->pp.request == PORT_REQUEST_ASSOCIATE) {
-
-		/* If the interface mac addr hasn't been assigned,
-		 * assign a random mac addr before setting port-
-		 * profile.
-		 */
+	if (new_pp.request == PORT_REQUEST_ASSOCIATE) {
+		/* Special case handling */
+		if (!is_zero_ether_addr(enic->pp.vf_mac))
+			memcpy(new_pp.mac_addr, enic->pp.vf_mac, ETH_ALEN);
 
 		if (is_zero_ether_addr(netdev->dev_addr))
 			random_ether_addr(netdev->dev_addr);
+	} else if (new_pp.request == PORT_REQUEST_DISASSOCIATE) {
+		if (!is_zero_ether_addr(enic->pp.mac_addr))
+			enic_dev_del_addr(enic, enic->pp.mac_addr);
 	}
 
-	return enic_set_port_profile(enic, netdev->dev_addr);
+	memcpy(&enic->pp, &new_pp, sizeof(struct enic_port_profile));
+
+	err = enic_set_port_profile(enic, netdev->dev_addr);
+	if (err)
+		goto set_port_profile_cleanup;
+
+	if (!is_zero_ether_addr(enic->pp.mac_addr))
+		enic_dev_add_addr(enic, enic->pp.mac_addr);
+
+set_port_profile_cleanup:
+	memset(enic->pp.vf_mac, 0, ETH_ALEN);
+
+	if (err || enic->pp.request == PORT_REQUEST_DISASSOCIATE) {
+		memset(netdev->dev_addr, 0, ETH_ALEN);
+		memset(enic->pp.mac_addr, 0, ETH_ALEN);
+	}
+
+	return err;
 }
 
 static int enic_get_vf_port(struct net_device *netdev, int vf,
@@ -1851,8 +1981,11 @@ static int enic_open(struct net_device *netdev)
 	for (i = 0; i < enic->rq_count; i++)
 		vnic_rq_enable(&enic->rq[i]);
 
-	enic_dev_add_station_addr(enic);
-	enic_set_multicast_list(netdev);
+	if (enic_is_dynamic(enic) && !is_zero_ether_addr(enic->pp.mac_addr))
+		enic_dev_add_addr(enic, enic->pp.mac_addr);
+	else
+		enic_dev_add_station_addr(enic);
+	enic_set_rx_mode(netdev);
 
 	netif_wake_queue(netdev);
 
@@ -1899,7 +2032,10 @@ static int enic_stop(struct net_device *netdev)
 
 	netif_carrier_off(netdev);
 	netif_tx_disable(netdev);
-	enic_dev_del_station_addr(enic);
+	if (enic_is_dynamic(enic) && !is_zero_ether_addr(enic->pp.mac_addr))
+		enic_dev_del_addr(enic, enic->pp.mac_addr);
+	else
+		enic_dev_del_station_addr(enic);
 
 	for (i = 0; i < enic->wq_count; i++) {
 		err = vnic_wq_disable(&enic->wq[i]);
@@ -1962,7 +2098,8 @@ static void enic_poll_controller(struct net_device *netdev)
 	case VNIC_DEV_INTR_MODE_MSIX:
 		for (i = 0; i < enic->rq_count; i++) {
 			intr = enic_msix_rq_intr(enic, i);
-			enic_isr_msix_rq(enic->msix_entry[intr].vector, enic);
+			enic_isr_msix_rq(enic->msix_entry[intr].vector,
+				&enic->napi[i]);
 		}
 		intr = enic_msix_wq_intr(enic, i);
 		enic_isr_msix_wq(enic->msix_entry[intr].vector, enic);
@@ -2042,7 +2179,7 @@ static int enic_dev_hang_reset(struct enic *enic)
 
 static int enic_set_rsskey(struct enic *enic)
 {
-	u64 rss_key_buf_pa;
+	dma_addr_t rss_key_buf_pa;
 	union vnic_rss_key *rss_key_buf_va = NULL;
 	union vnic_rss_key rss_key = {
 		.key[0].b = {85, 67, 83, 97, 119, 101, 115, 111, 109, 101},
@@ -2073,7 +2210,7 @@ static int enic_set_rsskey(struct enic *enic)
 
 static int enic_set_rsscpu(struct enic *enic, u8 rss_hash_bits)
 {
-	u64 rss_cpu_buf_pa;
+	dma_addr_t rss_cpu_buf_pa;
 	union vnic_rss_cpu *rss_cpu_buf_va = NULL;
 	unsigned int i;
 	int err;
@@ -2328,7 +2465,8 @@ static const struct net_device_ops enic_netdev_dynamic_ops = {
 	.ndo_start_xmit		= enic_hard_start_xmit,
 	.ndo_get_stats		= enic_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_multicast_list	= enic_set_multicast_list,
+	.ndo_set_rx_mode	= enic_set_rx_mode,
+	.ndo_set_multicast_list	= enic_set_rx_mode,
 	.ndo_set_mac_address	= enic_set_mac_address_dynamic,
 	.ndo_change_mtu		= enic_change_mtu,
 	.ndo_vlan_rx_register	= enic_vlan_rx_register,
@@ -2337,6 +2475,9 @@ static const struct net_device_ops enic_netdev_dynamic_ops = {
 	.ndo_tx_timeout		= enic_tx_timeout,
 	.ndo_set_vf_port	= enic_set_vf_port,
 	.ndo_get_vf_port	= enic_get_vf_port,
+#ifdef IFLA_VF_MAX
+	.ndo_set_vf_mac		= enic_set_vf_mac,
+#endif
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= enic_poll_controller,
 #endif
@@ -2349,7 +2490,8 @@ static const struct net_device_ops enic_netdev_ops = {
 	.ndo_get_stats		= enic_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= enic_set_mac_address,
-	.ndo_set_multicast_list	= enic_set_multicast_list,
+	.ndo_set_rx_mode	= enic_set_rx_mode,
+	.ndo_set_multicast_list	= enic_set_rx_mode,
 	.ndo_change_mtu		= enic_change_mtu,
 	.ndo_vlan_rx_register	= enic_vlan_rx_register,
 	.ndo_vlan_rx_add_vid	= enic_vlan_rx_add_vid,
@@ -2693,7 +2835,7 @@ static void __devexit enic_remove(struct pci_dev *pdev)
 	if (netdev) {
 		struct enic *enic = netdev_priv(netdev);
 
-		flush_scheduled_work();
+		cancel_work_sync(&enic->reset);
 		unregister_netdev(netdev);
 		enic_dev_deinit(enic);
 		vnic_dev_close(enic->vdev);
diff --git a/drivers/net/enic/enic_res.h b/drivers/net/enic/enic_res.h
index 9a103d9ef9e..25be2734c3f 100644
--- a/drivers/net/enic/enic_res.h
+++ b/drivers/net/enic/enic_res.h
@@ -34,6 +34,7 @@
 #define ENIC_MAX_MTU			9000
 
 #define ENIC_MULTICAST_PERFECT_FILTERS	32
+#define ENIC_UNICAST_PERFECT_FILTERS	32
 
 #define ENIC_NON_TSO_MAX_DESC		16
 
diff --git a/drivers/net/enic/vnic_vic.h b/drivers/net/enic/vnic_vic.h
index 7e46e5e8600..f700f5d9e81 100644
--- a/drivers/net/enic/vnic_vic.h
+++ b/drivers/net/enic/vnic_vic.h
@@ -24,14 +24,29 @@
 /* Note: String field lengths include null char */
 
 #define VIC_PROVINFO_CISCO_OUI		{ 0x00, 0x00, 0x0c }
-#define VIC_PROVINFO_LINUX_TYPE		0x2
-
-enum vic_linux_prov_tlv_type {
-	VIC_LINUX_PROV_TLV_PORT_PROFILE_NAME_STR = 0,
-	VIC_LINUX_PROV_TLV_CLIENT_MAC_ADDR = 1,			/* u8[6] */
-	VIC_LINUX_PROV_TLV_CLIENT_NAME_STR = 2,
-	VIC_LINUX_PROV_TLV_HOST_UUID_STR = 8,
-	VIC_LINUX_PROV_TLV_CLIENT_UUID_STR = 9,
+#define VIC_PROVINFO_GENERIC_TYPE		0x4
+
+enum vic_generic_prov_tlv_type {
+	VIC_GENERIC_PROV_TLV_PORT_PROFILE_NAME_STR = 0,
+	VIC_GENERIC_PROV_TLV_CLIENT_MAC_ADDR = 1,
+	VIC_GENERIC_PROV_TLV_CLIENT_NAME_STR = 2,
+	VIC_GENERIC_PROV_TLV_CLUSTER_PORT_NAME_STR = 3,
+	VIC_GENERIC_PROV_TLV_CLUSTER_PORT_UUID_STR = 4,
+	VIC_GENERIC_PROV_TLV_CLUSTER_UUID_STR = 5,
+	VIC_GENERIC_PROV_TLV_CLUSTER_NAME_STR = 7,
+	VIC_GENERIC_PROV_TLV_HOST_UUID_STR = 8,
+	VIC_GENERIC_PROV_TLV_CLIENT_UUID_STR = 9,
+	VIC_GENERIC_PROV_TLV_INCARNATION_NUMBER = 10,
+	VIC_GENERIC_PROV_TLV_OS_TYPE = 11,
+	VIC_GENERIC_PROV_TLV_OS_VENDOR = 12,
+	VIC_GENERIC_PROV_TLV_CLIENT_TYPE = 15,
+};
+
+enum vic_generic_prov_os_type {
+	VIC_GENERIC_PROV_OS_TYPE_UNKNOWN = 0,
+	VIC_GENERIC_PROV_OS_TYPE_ESX = 1,
+	VIC_GENERIC_PROV_OS_TYPE_LINUX = 2,
+	VIC_GENERIC_PROV_OS_TYPE_WINDOWS = 3,
 };
 
 struct vic_provinfo {
diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c
index aa56963ad55..c353bf3113c 100644
--- a/drivers/net/epic100.c
+++ b/drivers/net/epic100.c
@@ -935,7 +935,7 @@ static void epic_init_ring(struct net_device *dev)
 
 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
 	for (i = 0; i < RX_RING_SIZE; i++) {
-		struct sk_buff *skb = dev_alloc_skb(ep->rx_buf_sz);
+		struct sk_buff *skb = dev_alloc_skb(ep->rx_buf_sz + 2);
 		ep->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
@@ -1233,7 +1233,7 @@ static int epic_rx(struct net_device *dev, int budget)
 		entry = ep->dirty_rx % RX_RING_SIZE;
 		if (ep->rx_skbuff[entry] == NULL) {
 			struct sk_buff *skb;
-			skb = ep->rx_skbuff[entry] = dev_alloc_skb(ep->rx_buf_sz);
+			skb = ep->rx_skbuff[entry] = dev_alloc_skb(ep->rx_buf_sz + 2);
 			if (skb == NULL)
 				break;
 			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index c5a2fe099a8..b79d7e1555d 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 #include <net/ethoc.h>
 
 static int buffer_size = 0x8000; /* 32 KBytes */
@@ -184,7 +185,6 @@ MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size");
  * @netdev:	pointer to network device structure
  * @napi:	NAPI structure
  * @msg_enable:	device state flags
- * @rx_lock:	receive lock
  * @lock:	device lock
  * @phy:	attached PHY
  * @mdio:	MDIO bus for PHY access
@@ -209,7 +209,6 @@ struct ethoc {
 	struct napi_struct napi;
 	u32 msg_enable;
 
-	spinlock_t rx_lock;
 	spinlock_t lock;
 
 	struct phy_device *phy;
@@ -413,10 +412,21 @@ static int ethoc_rx(struct net_device *dev, int limit)
 		unsigned int entry;
 		struct ethoc_bd bd;
 
-		entry = priv->num_tx + (priv->cur_rx % priv->num_rx);
+		entry = priv->num_tx + priv->cur_rx;
 		ethoc_read_bd(priv, entry, &bd);
-		if (bd.stat & RX_BD_EMPTY)
-			break;
+		if (bd.stat & RX_BD_EMPTY) {
+			ethoc_ack_irq(priv, INT_MASK_RX);
+			/* If packet (interrupt) came in between checking
+			 * BD_EMTPY and clearing the interrupt source, then we
+			 * risk missing the packet as the RX interrupt won't
+			 * trigger right away when we reenable it; hence, check
+			 * BD_EMTPY here again to make sure there isn't such a
+			 * packet waiting for us...
+			 */
+			ethoc_read_bd(priv, entry, &bd);
+			if (bd.stat & RX_BD_EMPTY)
+				break;
+		}
 
 		if (ethoc_update_rx_stats(priv, &bd) == 0) {
 			int size = bd.stat >> 16;
@@ -446,13 +456,14 @@ static int ethoc_rx(struct net_device *dev, int limit)
 		bd.stat &= ~RX_BD_STATS;
 		bd.stat |=  RX_BD_EMPTY;
 		ethoc_write_bd(priv, entry, &bd);
-		priv->cur_rx++;
+		if (++priv->cur_rx == priv->num_rx)
+			priv->cur_rx = 0;
 	}
 
 	return count;
 }
 
-static int ethoc_update_tx_stats(struct ethoc *dev, struct ethoc_bd *bd)
+static void ethoc_update_tx_stats(struct ethoc *dev, struct ethoc_bd *bd)
 {
 	struct net_device *netdev = dev->netdev;
 
@@ -482,32 +493,44 @@ static int ethoc_update_tx_stats(struct ethoc *dev, struct ethoc_bd *bd)
 	netdev->stats.collisions += (bd->stat >> 4) & 0xf;
 	netdev->stats.tx_bytes += bd->stat >> 16;
 	netdev->stats.tx_packets++;
-	return 0;
 }
 
-static void ethoc_tx(struct net_device *dev)
+static int ethoc_tx(struct net_device *dev, int limit)
 {
 	struct ethoc *priv = netdev_priv(dev);
+	int count;
+	struct ethoc_bd bd;
 
-	spin_lock(&priv->lock);
+	for (count = 0; count < limit; ++count) {
+		unsigned int entry;
 
-	while (priv->dty_tx != priv->cur_tx) {
-		unsigned int entry = priv->dty_tx % priv->num_tx;
-		struct ethoc_bd bd;
+		entry = priv->dty_tx & (priv->num_tx-1);
 
 		ethoc_read_bd(priv, entry, &bd);
-		if (bd.stat & TX_BD_READY)
-			break;
 
-		entry = (++priv->dty_tx) % priv->num_tx;
-		(void)ethoc_update_tx_stats(priv, &bd);
+		if (bd.stat & TX_BD_READY || (priv->dty_tx == priv->cur_tx)) {
+			ethoc_ack_irq(priv, INT_MASK_TX);
+			/* If interrupt came in between reading in the BD
+			 * and clearing the interrupt source, then we risk
+			 * missing the event as the TX interrupt won't trigger
+			 * right away when we reenable it; hence, check
+			 * BD_EMPTY here again to make sure there isn't such an
+			 * event pending...
+			 */
+			ethoc_read_bd(priv, entry, &bd);
+			if (bd.stat & TX_BD_READY ||
+			    (priv->dty_tx == priv->cur_tx))
+				break;
+		}
+
+		ethoc_update_tx_stats(priv, &bd);
+		priv->dty_tx++;
 	}
 
 	if ((priv->cur_tx - priv->dty_tx) <= (priv->num_tx / 2))
 		netif_wake_queue(dev);
 
-	ethoc_ack_irq(priv, INT_MASK_TX);
-	spin_unlock(&priv->lock);
+	return count;
 }
 
 static irqreturn_t ethoc_interrupt(int irq, void *dev_id)
@@ -515,32 +538,38 @@ static irqreturn_t ethoc_interrupt(int irq, void *dev_id)
 	struct net_device *dev = dev_id;
 	struct ethoc *priv = netdev_priv(dev);
 	u32 pending;
-
-	ethoc_disable_irq(priv, INT_MASK_ALL);
+	u32 mask;
+
+	/* Figure out what triggered the interrupt...
+	 * The tricky bit here is that the interrupt source bits get
+	 * set in INT_SOURCE for an event irregardless of whether that
+	 * event is masked or not.  Thus, in order to figure out what
+	 * triggered the interrupt, we need to remove the sources
+	 * for all events that are currently masked.  This behaviour
+	 * is not particularly well documented but reasonable...
+	 */
+	mask = ethoc_read(priv, INT_MASK);
 	pending = ethoc_read(priv, INT_SOURCE);
+	pending &= mask;
+
 	if (unlikely(pending == 0)) {
-		ethoc_enable_irq(priv, INT_MASK_ALL);
 		return IRQ_NONE;
 	}
 
 	ethoc_ack_irq(priv, pending);
 
+	/* We always handle the dropped packet interrupt */
 	if (pending & INT_MASK_BUSY) {
 		dev_err(&dev->dev, "packet dropped\n");
 		dev->stats.rx_dropped++;
 	}
 
-	if (pending & INT_MASK_RX) {
-		if (napi_schedule_prep(&priv->napi))
-			__napi_schedule(&priv->napi);
-	} else {
-		ethoc_enable_irq(priv, INT_MASK_RX);
+	/* Handle receive/transmit event by switching to polling */
+	if (pending & (INT_MASK_TX | INT_MASK_RX)) {
+		ethoc_disable_irq(priv, INT_MASK_TX | INT_MASK_RX);
+		napi_schedule(&priv->napi);
 	}
 
-	if (pending & INT_MASK_TX)
-		ethoc_tx(dev);
-
-	ethoc_enable_irq(priv, INT_MASK_ALL & ~INT_MASK_RX);
 	return IRQ_HANDLED;
 }
 
@@ -566,26 +595,29 @@ static int ethoc_get_mac_address(struct net_device *dev, void *addr)
 static int ethoc_poll(struct napi_struct *napi, int budget)
 {
 	struct ethoc *priv = container_of(napi, struct ethoc, napi);
-	int work_done = 0;
+	int rx_work_done = 0;
+	int tx_work_done = 0;
+
+	rx_work_done = ethoc_rx(priv->netdev, budget);
+	tx_work_done = ethoc_tx(priv->netdev, budget);
 
-	work_done = ethoc_rx(priv->netdev, budget);
-	if (work_done < budget) {
-		ethoc_enable_irq(priv, INT_MASK_RX);
+	if (rx_work_done < budget && tx_work_done < budget) {
 		napi_complete(napi);
+		ethoc_enable_irq(priv, INT_MASK_TX | INT_MASK_RX);
 	}
 
-	return work_done;
+	return rx_work_done;
 }
 
 static int ethoc_mdio_read(struct mii_bus *bus, int phy, int reg)
 {
-	unsigned long timeout = jiffies + ETHOC_MII_TIMEOUT;
 	struct ethoc *priv = bus->priv;
+	int i;
 
 	ethoc_write(priv, MIIADDRESS, MIIADDRESS_ADDR(phy, reg));
 	ethoc_write(priv, MIICOMMAND, MIICOMMAND_READ);
 
-	while (time_before(jiffies, timeout)) {
+	for (i=0; i < 5; i++) {
 		u32 status = ethoc_read(priv, MIISTATUS);
 		if (!(status & MIISTATUS_BUSY)) {
 			u32 data = ethoc_read(priv, MIIRX_DATA);
@@ -593,8 +625,7 @@ static int ethoc_mdio_read(struct mii_bus *bus, int phy, int reg)
 			ethoc_write(priv, MIICOMMAND, 0);
 			return data;
 		}
-
-		schedule();
+		usleep_range(100,200);
 	}
 
 	return -EBUSY;
@@ -602,22 +633,21 @@ static int ethoc_mdio_read(struct mii_bus *bus, int phy, int reg)
 
 static int ethoc_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val)
 {
-	unsigned long timeout = jiffies + ETHOC_MII_TIMEOUT;
 	struct ethoc *priv = bus->priv;
+	int i;
 
 	ethoc_write(priv, MIIADDRESS, MIIADDRESS_ADDR(phy, reg));
 	ethoc_write(priv, MIITX_DATA, val);
 	ethoc_write(priv, MIICOMMAND, MIICOMMAND_WRITE);
 
-	while (time_before(jiffies, timeout)) {
+	for (i=0; i < 5; i++) {
 		u32 stat = ethoc_read(priv, MIISTATUS);
 		if (!(stat & MIISTATUS_BUSY)) {
 			/* reset MII command register */
 			ethoc_write(priv, MIICOMMAND, 0);
 			return 0;
 		}
-
-		schedule();
+		usleep_range(100,200);
 	}
 
 	return -EBUSY;
@@ -971,9 +1001,17 @@ static int __devinit ethoc_probe(struct platform_device *pdev)
 	/* calculate the number of TX/RX buffers, maximum 128 supported */
 	num_bd = min_t(unsigned int,
 		128, (netdev->mem_end - netdev->mem_start + 1) / ETHOC_BUFSIZ);
-	priv->num_tx = max(2, num_bd / 4);
+	if (num_bd < 4) {
+		ret = -ENODEV;
+		goto error;
+	}
+	/* num_tx must be a power of two */
+	priv->num_tx = rounddown_pow_of_two(num_bd >> 1);
 	priv->num_rx = num_bd - priv->num_tx;
 
+	dev_dbg(&pdev->dev, "ethoc: num_tx: %d num_rx: %d\n",
+		priv->num_tx, priv->num_rx);
+
 	priv->vma = devm_kzalloc(&pdev->dev, num_bd*sizeof(void*), GFP_KERNEL);
 	if (!priv->vma) {
 		ret = -ENOMEM;
@@ -982,10 +1020,23 @@ static int __devinit ethoc_probe(struct platform_device *pdev)
 
 	/* Allow the platform setup code to pass in a MAC address. */
 	if (pdev->dev.platform_data) {
-		struct ethoc_platform_data *pdata =
-			(struct ethoc_platform_data *)pdev->dev.platform_data;
+		struct ethoc_platform_data *pdata = pdev->dev.platform_data;
 		memcpy(netdev->dev_addr, pdata->hwaddr, IFHWADDRLEN);
 		priv->phy_id = pdata->phy_id;
+	} else {
+		priv->phy_id = -1;
+
+#ifdef CONFIG_OF
+		{
+		const uint8_t* mac;
+
+		mac = of_get_property(pdev->dev.of_node,
+				      "local-mac-address",
+				      NULL);
+		if (mac)
+			memcpy(netdev->dev_addr, mac, IFHWADDRLEN);
+		}
+#endif
 	}
 
 	/* Check that the given MAC address is valid. If it isn't, read the
@@ -1046,7 +1097,6 @@ static int __devinit ethoc_probe(struct platform_device *pdev)
 	/* setup NAPI */
 	netif_napi_add(netdev, &priv->napi, ethoc_poll, 64);
 
-	spin_lock_init(&priv->rx_lock);
 	spin_lock_init(&priv->lock);
 
 	ret = register_netdev(netdev);
@@ -1113,6 +1163,16 @@ static int ethoc_resume(struct platform_device *pdev)
 # define ethoc_resume  NULL
 #endif
 
+#ifdef CONFIG_OF
+static struct of_device_id ethoc_match[] = {
+	{
+		.compatible = "opencores,ethoc",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ethoc_match);
+#endif
+
 static struct platform_driver ethoc_driver = {
 	.probe   = ethoc_probe,
 	.remove  = __devexit_p(ethoc_remove),
@@ -1120,6 +1180,10 @@ static struct platform_driver ethoc_driver = {
 	.resume  = ethoc_resume,
 	.driver  = {
 		.name = "ethoc",
+		.owner = THIS_MODULE,
+#ifdef CONFIG_OF
+		.of_match_table = ethoc_match,
+#endif
 	},
 };
 
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index e9f5d030bc2..50c1213f61f 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -366,9 +366,8 @@ static irqreturn_t mpc52xx_fec_tx_interrupt(int irq, void *dev_id)
 {
 	struct net_device *dev = dev_id;
 	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
-	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock(&priv->lock);
 	while (bcom_buffer_done(priv->tx_dmatsk)) {
 		struct sk_buff *skb;
 		struct bcom_fec_bd *bd;
@@ -379,7 +378,7 @@ static irqreturn_t mpc52xx_fec_tx_interrupt(int irq, void *dev_id)
 
 		dev_kfree_skb_irq(skb);
 	}
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock(&priv->lock);
 
 	netif_wake_queue(dev);
 
@@ -395,9 +394,8 @@ static irqreturn_t mpc52xx_fec_rx_interrupt(int irq, void *dev_id)
 	struct bcom_fec_bd *bd;
 	u32 status, physaddr;
 	int length;
-	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock(&priv->lock);
 
 	while (bcom_buffer_done(priv->rx_dmatsk)) {
 
@@ -429,7 +427,7 @@ static irqreturn_t mpc52xx_fec_rx_interrupt(int irq, void *dev_id)
 
 		/* Process the received skb - Drop the spin lock while
 		 * calling into the network stack */
-		spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock(&priv->lock);
 
 		dma_unmap_single(dev->dev.parent, physaddr, rskb->len,
 				 DMA_FROM_DEVICE);
@@ -438,10 +436,10 @@ static irqreturn_t mpc52xx_fec_rx_interrupt(int irq, void *dev_id)
 		rskb->protocol = eth_type_trans(rskb, dev);
 		netif_rx(rskb);
 
-		spin_lock_irqsave(&priv->lock, flags);
+		spin_lock(&priv->lock);
 	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
+	spin_unlock(&priv->lock);
 
 	return IRQ_HANDLED;
 }
@@ -452,7 +450,6 @@ static irqreturn_t mpc52xx_fec_interrupt(int irq, void *dev_id)
 	struct mpc52xx_fec_priv *priv = netdev_priv(dev);
 	struct mpc52xx_fec __iomem *fec = priv->fec;
 	u32 ievent;
-	unsigned long flags;
 
 	ievent = in_be32(&fec->ievent);
 
@@ -470,9 +467,9 @@ static irqreturn_t mpc52xx_fec_interrupt(int irq, void *dev_id)
 		if (net_ratelimit() && (ievent & FEC_IEVENT_XFIFO_ERROR))
 			dev_warn(&dev->dev, "FEC_IEVENT_XFIFO_ERROR\n");
 
-		spin_lock_irqsave(&priv->lock, flags);
+		spin_lock(&priv->lock);
 		mpc52xx_fec_reset(dev);
-		spin_unlock_irqrestore(&priv->lock, flags);
+		spin_unlock(&priv->lock);
 
 		return IRQ_HANDLED;
 	}
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 0fa1776563a..cd2d72d825d 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -39,6 +39,9 @@
  * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
  * superfluous timer interrupts from the nic.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #define FORCEDETH_VERSION		"0.64"
 #define DRV_NAME			"forcedeth"
 
@@ -60,18 +63,12 @@
 #include <linux/if_vlan.h>
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
+#include <linux/uaccess.h>
+#include  <linux/io.h>
 
 #include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
 #include <asm/system.h>
 
-#if 0
-#define dprintk			printk
-#else
-#define dprintk(x...)		do { } while (0)
-#endif
-
 #define TX_WORK_PER_LOOP  64
 #define RX_WORK_PER_LOOP  64
 
@@ -186,9 +183,9 @@ enum {
 	NvRegSlotTime = 0x9c,
 #define NVREG_SLOTTIME_LEGBF_ENABLED	0x80000000
 #define NVREG_SLOTTIME_10_100_FULL	0x00007f00
-#define NVREG_SLOTTIME_1000_FULL 	0x0003ff00
+#define NVREG_SLOTTIME_1000_FULL	0x0003ff00
 #define NVREG_SLOTTIME_HALF		0x0000ff00
-#define NVREG_SLOTTIME_DEFAULT	 	0x00007f00
+#define NVREG_SLOTTIME_DEFAULT		0x00007f00
 #define NVREG_SLOTTIME_MASK		0x000000ff
 
 	NvRegTxDeferral = 0xA0,
@@ -297,7 +294,7 @@ enum {
 #define NVREG_WAKEUPFLAGS_ENABLE	0x1111
 
 	NvRegMgmtUnitGetVersion = 0x204,
-#define NVREG_MGMTUNITGETVERSION     	0x01
+#define NVREG_MGMTUNITGETVERSION	0x01
 	NvRegMgmtUnitVersion = 0x208,
 #define NVREG_MGMTUNITVERSION		0x08
 	NvRegPowerCap = 0x268,
@@ -368,8 +365,8 @@ struct ring_desc_ex {
 };
 
 union ring_type {
-	struct ring_desc* orig;
-	struct ring_desc_ex* ex;
+	struct ring_desc *orig;
+	struct ring_desc_ex *ex;
 };
 
 #define FLAG_MASK_V1 0xffff0000
@@ -444,10 +441,10 @@ union ring_type {
 #define NV_RX3_VLAN_TAG_MASK	(0x0000FFFF)
 
 /* Miscelaneous hardware related defines: */
-#define NV_PCI_REGSZ_VER1      	0x270
-#define NV_PCI_REGSZ_VER2      	0x2d4
-#define NV_PCI_REGSZ_VER3      	0x604
-#define NV_PCI_REGSZ_MAX       	0x604
+#define NV_PCI_REGSZ_VER1	0x270
+#define NV_PCI_REGSZ_VER2	0x2d4
+#define NV_PCI_REGSZ_VER3	0x604
+#define NV_PCI_REGSZ_MAX	0x604
 
 /* various timeout delays: all in usec */
 #define NV_TXRX_RESET_DELAY	4
@@ -717,7 +714,7 @@ static const struct register_test nv_registers_test[] = {
 	{ NvRegMulticastAddrA, 0xffffffff },
 	{ NvRegTxWatermark, 0x0ff },
 	{ NvRegWakeUpFlags, 0x07777 },
-	{ 0,0 }
+	{ 0, 0 }
 };
 
 struct nv_skb_map {
@@ -911,7 +908,7 @@ static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED;
  * Power down phy when interface is down (persists through reboot;
  * older Linux and other OSes may not power it up again)
  */
-static int phy_power_down = 0;
+static int phy_power_down;
 
 static inline struct fe_priv *get_nvpriv(struct net_device *dev)
 {
@@ -948,7 +945,7 @@ static bool nv_optimized(struct fe_priv *np)
 }
 
 static int reg_delay(struct net_device *dev, int offset, u32 mask, u32 target,
-				int delay, int delaymax, const char *msg)
+		     int delay, int delaymax)
 {
 	u8 __iomem *base = get_hwbase(dev);
 
@@ -956,11 +953,8 @@ static int reg_delay(struct net_device *dev, int offset, u32 mask, u32 target,
 	do {
 		udelay(delay);
 		delaymax -= delay;
-		if (delaymax < 0) {
-			if (msg)
-				printk("%s", msg);
+		if (delaymax < 0)
 			return 1;
-		}
 	} while ((readl(base + offset) & mask) != target);
 	return 0;
 }
@@ -984,12 +978,10 @@ static void setup_hw_rings(struct net_device *dev, int rxtx_flags)
 	u8 __iomem *base = get_hwbase(dev);
 
 	if (!nv_optimized(np)) {
-		if (rxtx_flags & NV_SETUP_RX_RING) {
+		if (rxtx_flags & NV_SETUP_RX_RING)
 			writel(dma_low(np->ring_addr), base + NvRegRxRingPhysAddr);
-		}
-		if (rxtx_flags & NV_SETUP_TX_RING) {
+		if (rxtx_flags & NV_SETUP_TX_RING)
 			writel(dma_low(np->ring_addr + np->rx_ring_size*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
-		}
 	} else {
 		if (rxtx_flags & NV_SETUP_RX_RING) {
 			writel(dma_low(np->ring_addr), base + NvRegRxRingPhysAddr);
@@ -1015,10 +1007,8 @@ static void free_rings(struct net_device *dev)
 			pci_free_consistent(np->pci_dev, sizeof(struct ring_desc_ex) * (np->rx_ring_size + np->tx_ring_size),
 					    np->rx_ring.ex, np->ring_addr);
 	}
-	if (np->rx_skb)
-		kfree(np->rx_skb);
-	if (np->tx_skb)
-		kfree(np->tx_skb);
+	kfree(np->rx_skb);
+	kfree(np->tx_skb);
 }
 
 static int using_multi_irqs(struct net_device *dev)
@@ -1145,23 +1135,15 @@ static int mii_rw(struct net_device *dev, int addr, int miireg, int value)
 	writel(reg, base + NvRegMIIControl);
 
 	if (reg_delay(dev, NvRegMIIControl, NVREG_MIICTL_INUSE, 0,
-			NV_MIIPHY_DELAY, NV_MIIPHY_DELAYMAX, NULL)) {
-		dprintk(KERN_DEBUG "%s: mii_rw of reg %d at PHY %d timed out.\n",
-				dev->name, miireg, addr);
+			NV_MIIPHY_DELAY, NV_MIIPHY_DELAYMAX)) {
 		retval = -1;
 	} else if (value != MII_READ) {
 		/* it was a write operation - fewer failures are detectable */
-		dprintk(KERN_DEBUG "%s: mii_rw wrote 0x%x to reg %d at PHY %d\n",
-				dev->name, value, miireg, addr);
 		retval = 0;
 	} else if (readl(base + NvRegMIIStatus) & NVREG_MIISTAT_ERROR) {
-		dprintk(KERN_DEBUG "%s: mii_rw of reg %d at PHY %d failed.\n",
-				dev->name, miireg, addr);
 		retval = -1;
 	} else {
 		retval = readl(base + NvRegMIIData);
-		dprintk(KERN_DEBUG "%s: mii_rw read from reg %d at PHY %d: 0x%x.\n",
-				dev->name, miireg, addr, retval);
 	}
 
 	return retval;
@@ -1174,16 +1156,15 @@ static int phy_reset(struct net_device *dev, u32 bmcr_setup)
 	unsigned int tries = 0;
 
 	miicontrol = BMCR_RESET | bmcr_setup;
-	if (mii_rw(dev, np->phyaddr, MII_BMCR, miicontrol)) {
+	if (mii_rw(dev, np->phyaddr, MII_BMCR, miicontrol))
 		return -1;
-	}
 
 	/* wait for 500ms */
 	msleep(500);
 
 	/* must wait till reset is deasserted */
 	while (miicontrol & BMCR_RESET) {
-		msleep(10);
+		usleep_range(10000, 20000);
 		miicontrol = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
 		/* FIXME: 100 tries seem excessive */
 		if (tries++ > 100)
@@ -1192,106 +1173,239 @@ static int phy_reset(struct net_device *dev, u32 bmcr_setup)
 	return 0;
 }
 
+static int init_realtek_8211b(struct net_device *dev, struct fe_priv *np)
+{
+	static const struct {
+		int reg;
+		int init;
+	} ri[] = {
+		{ PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1 },
+		{ PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2 },
+		{ PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3 },
+		{ PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4 },
+		{ PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5 },
+		{ PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6 },
+		{ PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1 },
+	};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ri); i++) {
+		if (mii_rw(dev, np->phyaddr, ri[i].reg, ri[i].init))
+			return PHY_ERROR;
+	}
+
+	return 0;
+}
+
+static int init_realtek_8211c(struct net_device *dev, struct fe_priv *np)
+{
+	u32 reg;
+	u8 __iomem *base = get_hwbase(dev);
+	u32 powerstate = readl(base + NvRegPowerState2);
+
+	/* need to perform hw phy reset */
+	powerstate |= NVREG_POWERSTATE2_PHY_RESET;
+	writel(powerstate, base + NvRegPowerState2);
+	msleep(25);
+
+	powerstate &= ~NVREG_POWERSTATE2_PHY_RESET;
+	writel(powerstate, base + NvRegPowerState2);
+	msleep(25);
+
+	reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
+	reg |= PHY_REALTEK_INIT9;
+	if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, reg))
+		return PHY_ERROR;
+	if (mii_rw(dev, np->phyaddr,
+		   PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10))
+		return PHY_ERROR;
+	reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, MII_READ);
+	if (!(reg & PHY_REALTEK_INIT11)) {
+		reg |= PHY_REALTEK_INIT11;
+		if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, reg))
+			return PHY_ERROR;
+	}
+	if (mii_rw(dev, np->phyaddr,
+		   PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1))
+		return PHY_ERROR;
+
+	return 0;
+}
+
+static int init_realtek_8201(struct net_device *dev, struct fe_priv *np)
+{
+	u32 phy_reserved;
+
+	if (np->driver_data & DEV_NEED_PHY_INIT_FIX) {
+		phy_reserved = mii_rw(dev, np->phyaddr,
+				      PHY_REALTEK_INIT_REG6, MII_READ);
+		phy_reserved |= PHY_REALTEK_INIT7;
+		if (mii_rw(dev, np->phyaddr,
+			   PHY_REALTEK_INIT_REG6, phy_reserved))
+			return PHY_ERROR;
+	}
+
+	return 0;
+}
+
+static int init_realtek_8201_cross(struct net_device *dev, struct fe_priv *np)
+{
+	u32 phy_reserved;
+
+	if (phy_cross == NV_CROSSOVER_DETECTION_DISABLED) {
+		if (mii_rw(dev, np->phyaddr,
+			   PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3))
+			return PHY_ERROR;
+		phy_reserved = mii_rw(dev, np->phyaddr,
+				      PHY_REALTEK_INIT_REG2, MII_READ);
+		phy_reserved &= ~PHY_REALTEK_INIT_MSK1;
+		phy_reserved |= PHY_REALTEK_INIT3;
+		if (mii_rw(dev, np->phyaddr,
+			   PHY_REALTEK_INIT_REG2, phy_reserved))
+			return PHY_ERROR;
+		if (mii_rw(dev, np->phyaddr,
+			   PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1))
+			return PHY_ERROR;
+	}
+
+	return 0;
+}
+
+static int init_cicada(struct net_device *dev, struct fe_priv *np,
+		       u32 phyinterface)
+{
+	u32 phy_reserved;
+
+	if (phyinterface & PHY_RGMII) {
+		phy_reserved = mii_rw(dev, np->phyaddr, MII_RESV1, MII_READ);
+		phy_reserved &= ~(PHY_CICADA_INIT1 | PHY_CICADA_INIT2);
+		phy_reserved |= (PHY_CICADA_INIT3 | PHY_CICADA_INIT4);
+		if (mii_rw(dev, np->phyaddr, MII_RESV1, phy_reserved))
+			return PHY_ERROR;
+		phy_reserved = mii_rw(dev, np->phyaddr, MII_NCONFIG, MII_READ);
+		phy_reserved |= PHY_CICADA_INIT5;
+		if (mii_rw(dev, np->phyaddr, MII_NCONFIG, phy_reserved))
+			return PHY_ERROR;
+	}
+	phy_reserved = mii_rw(dev, np->phyaddr, MII_SREVISION, MII_READ);
+	phy_reserved |= PHY_CICADA_INIT6;
+	if (mii_rw(dev, np->phyaddr, MII_SREVISION, phy_reserved))
+		return PHY_ERROR;
+
+	return 0;
+}
+
+static int init_vitesse(struct net_device *dev, struct fe_priv *np)
+{
+	u32 phy_reserved;
+
+	if (mii_rw(dev, np->phyaddr,
+		   PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT1))
+		return PHY_ERROR;
+	if (mii_rw(dev, np->phyaddr,
+		   PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT2))
+		return PHY_ERROR;
+	phy_reserved = mii_rw(dev, np->phyaddr,
+			      PHY_VITESSE_INIT_REG4, MII_READ);
+	if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved))
+		return PHY_ERROR;
+	phy_reserved = mii_rw(dev, np->phyaddr,
+			      PHY_VITESSE_INIT_REG3, MII_READ);
+	phy_reserved &= ~PHY_VITESSE_INIT_MSK1;
+	phy_reserved |= PHY_VITESSE_INIT3;
+	if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved))
+		return PHY_ERROR;
+	if (mii_rw(dev, np->phyaddr,
+		   PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT4))
+		return PHY_ERROR;
+	if (mii_rw(dev, np->phyaddr,
+		   PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT5))
+		return PHY_ERROR;
+	phy_reserved = mii_rw(dev, np->phyaddr,
+			      PHY_VITESSE_INIT_REG4, MII_READ);
+	phy_reserved &= ~PHY_VITESSE_INIT_MSK1;
+	phy_reserved |= PHY_VITESSE_INIT3;
+	if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved))
+		return PHY_ERROR;
+	phy_reserved = mii_rw(dev, np->phyaddr,
+			      PHY_VITESSE_INIT_REG3, MII_READ);
+	if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved))
+		return PHY_ERROR;
+	if (mii_rw(dev, np->phyaddr,
+		   PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT6))
+		return PHY_ERROR;
+	if (mii_rw(dev, np->phyaddr,
+		   PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT7))
+		return PHY_ERROR;
+	phy_reserved = mii_rw(dev, np->phyaddr,
+			      PHY_VITESSE_INIT_REG4, MII_READ);
+	if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved))
+		return PHY_ERROR;
+	phy_reserved = mii_rw(dev, np->phyaddr,
+			      PHY_VITESSE_INIT_REG3, MII_READ);
+	phy_reserved &= ~PHY_VITESSE_INIT_MSK2;
+	phy_reserved |= PHY_VITESSE_INIT8;
+	if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved))
+		return PHY_ERROR;
+	if (mii_rw(dev, np->phyaddr,
+		   PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT9))
+		return PHY_ERROR;
+	if (mii_rw(dev, np->phyaddr,
+		   PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT10))
+		return PHY_ERROR;
+
+	return 0;
+}
+
 static int phy_init(struct net_device *dev)
 {
 	struct fe_priv *np = get_nvpriv(dev);
 	u8 __iomem *base = get_hwbase(dev);
-	u32 phyinterface, phy_reserved, mii_status, mii_control, mii_control_1000,reg;
+	u32 phyinterface;
+	u32 mii_status, mii_control, mii_control_1000, reg;
 
 	/* phy errata for E3016 phy */
 	if (np->phy_model == PHY_MODEL_MARVELL_E3016) {
 		reg = mii_rw(dev, np->phyaddr, MII_NCONFIG, MII_READ);
 		reg &= ~PHY_MARVELL_E3016_INITMASK;
 		if (mii_rw(dev, np->phyaddr, MII_NCONFIG, reg)) {
-			printk(KERN_INFO "%s: phy write to errata reg failed.\n", pci_name(np->pci_dev));
+			netdev_info(dev, "%s: phy write to errata reg failed\n",
+				    pci_name(np->pci_dev));
 			return PHY_ERROR;
 		}
 	}
 	if (np->phy_oui == PHY_OUI_REALTEK) {
 		if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
 		    np->phy_rev == PHY_REV_REALTEK_8211B) {
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+			if (init_realtek_8211b(dev, np)) {
+				netdev_info(dev, "%s: phy init failed\n",
+					    pci_name(np->pci_dev));
 				return PHY_ERROR;
 			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+		} else if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
+			   np->phy_rev == PHY_REV_REALTEK_8211C) {
+			if (init_realtek_8211c(dev, np)) {
+				netdev_info(dev, "%s: phy init failed\n",
+					    pci_name(np->pci_dev));
 				return PHY_ERROR;
 			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+		} else if (np->phy_model == PHY_MODEL_REALTEK_8201) {
+			if (init_realtek_8201(dev, np)) {
+				netdev_info(dev, "%s: phy init failed\n",
+					    pci_name(np->pci_dev));
 				return PHY_ERROR;
 			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-		}
-		if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
-		    np->phy_rev == PHY_REV_REALTEK_8211C) {
-			u32 powerstate = readl(base + NvRegPowerState2);
-
-			/* need to perform hw phy reset */
-			powerstate |= NVREG_POWERSTATE2_PHY_RESET;
-			writel(powerstate, base + NvRegPowerState2);
-			msleep(25);
-
-			powerstate &= ~NVREG_POWERSTATE2_PHY_RESET;
-			writel(powerstate, base + NvRegPowerState2);
-			msleep(25);
-
-			reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
-			reg |= PHY_REALTEK_INIT9;
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, reg)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT10)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-			reg = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, MII_READ);
-			if (!(reg & PHY_REALTEK_INIT11)) {
-				reg |= PHY_REALTEK_INIT11;
-				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG7, reg)) {
-					printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-					return PHY_ERROR;
-				}
-			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-		}
-		if (np->phy_model == PHY_MODEL_REALTEK_8201) {
-			if (np->driver_data & DEV_NEED_PHY_INIT_FIX) {
-				phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
-				phy_reserved |= PHY_REALTEK_INIT7;
-				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
-					printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-					return PHY_ERROR;
-				}
-			}
 		}
 	}
 
 	/* set advertise register */
 	reg = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ);
-	reg |= (ADVERTISE_10HALF|ADVERTISE_10FULL|ADVERTISE_100HALF|ADVERTISE_100FULL|ADVERTISE_PAUSE_ASYM|ADVERTISE_PAUSE_CAP);
+	reg |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
+		ADVERTISE_100HALF | ADVERTISE_100FULL |
+		ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP);
 	if (mii_rw(dev, np->phyaddr, MII_ADVERTISE, reg)) {
-		printk(KERN_INFO "%s: phy write to advertise failed.\n", pci_name(np->pci_dev));
+		netdev_info(dev, "%s: phy write to advertise failed\n",
+			    pci_name(np->pci_dev));
 		return PHY_ERROR;
 	}
 
@@ -1302,7 +1416,8 @@ static int phy_init(struct net_device *dev)
 	mii_status = mii_rw(dev, np->phyaddr, MII_BMSR, MII_READ);
 	if (mii_status & PHY_GIGABIT) {
 		np->gigabit = PHY_GIGABIT;
-		mii_control_1000 = mii_rw(dev, np->phyaddr, MII_CTRL1000, MII_READ);
+		mii_control_1000 = mii_rw(dev, np->phyaddr,
+					  MII_CTRL1000, MII_READ);
 		mii_control_1000 &= ~ADVERTISE_1000HALF;
 		if (phyinterface & PHY_RGMII)
 			mii_control_1000 |= ADVERTISE_1000FULL;
@@ -1310,11 +1425,11 @@ static int phy_init(struct net_device *dev)
 			mii_control_1000 &= ~ADVERTISE_1000FULL;
 
 		if (mii_rw(dev, np->phyaddr, MII_CTRL1000, mii_control_1000)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+			netdev_info(dev, "%s: phy init failed\n",
+				    pci_name(np->pci_dev));
 			return PHY_ERROR;
 		}
-	}
-	else
+	} else
 		np->gigabit = 0;
 
 	mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
@@ -1326,7 +1441,8 @@ static int phy_init(struct net_device *dev)
 		/* start autoneg since we already performed hw reset above */
 		mii_control |= BMCR_ANRESTART;
 		if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
-			printk(KERN_INFO "%s: phy init failed\n", pci_name(np->pci_dev));
+			netdev_info(dev, "%s: phy init failed\n",
+				    pci_name(np->pci_dev));
 			return PHY_ERROR;
 		}
 	} else {
@@ -1334,165 +1450,42 @@ static int phy_init(struct net_device *dev)
 		 * (certain phys need bmcr to be setup with reset)
 		 */
 		if (phy_reset(dev, mii_control)) {
-			printk(KERN_INFO "%s: phy reset failed\n", pci_name(np->pci_dev));
+			netdev_info(dev, "%s: phy reset failed\n",
+				    pci_name(np->pci_dev));
 			return PHY_ERROR;
 		}
 	}
 
 	/* phy vendor specific configuration */
-	if ((np->phy_oui == PHY_OUI_CICADA) && (phyinterface & PHY_RGMII) ) {
-		phy_reserved = mii_rw(dev, np->phyaddr, MII_RESV1, MII_READ);
-		phy_reserved &= ~(PHY_CICADA_INIT1 | PHY_CICADA_INIT2);
-		phy_reserved |= (PHY_CICADA_INIT3 | PHY_CICADA_INIT4);
-		if (mii_rw(dev, np->phyaddr, MII_RESV1, phy_reserved)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		phy_reserved = mii_rw(dev, np->phyaddr, MII_NCONFIG, MII_READ);
-		phy_reserved |= PHY_CICADA_INIT5;
-		if (mii_rw(dev, np->phyaddr, MII_NCONFIG, phy_reserved)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-	}
-	if (np->phy_oui == PHY_OUI_CICADA) {
-		phy_reserved = mii_rw(dev, np->phyaddr, MII_SREVISION, MII_READ);
-		phy_reserved |= PHY_CICADA_INIT6;
-		if (mii_rw(dev, np->phyaddr, MII_SREVISION, phy_reserved)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-	}
-	if (np->phy_oui == PHY_OUI_VITESSE) {
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT1)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT2)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
-		phy_reserved &= ~PHY_VITESSE_INIT_MSK1;
-		phy_reserved |= PHY_VITESSE_INIT3;
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT4)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT5)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
-		phy_reserved &= ~PHY_VITESSE_INIT_MSK1;
-		phy_reserved |= PHY_VITESSE_INIT3;
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+	if ((np->phy_oui == PHY_OUI_CICADA)) {
+		if (init_cicada(dev, np, phyinterface)) {
+			netdev_info(dev, "%s: phy init failed\n",
+				    pci_name(np->pci_dev));
 			return PHY_ERROR;
 		}
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT6)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+	} else if (np->phy_oui == PHY_OUI_VITESSE) {
+		if (init_vitesse(dev, np)) {
+			netdev_info(dev, "%s: phy init failed\n",
+				    pci_name(np->pci_dev));
 			return PHY_ERROR;
 		}
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT7)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, MII_READ);
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG4, phy_reserved)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		phy_reserved = mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, MII_READ);
-		phy_reserved &= ~PHY_VITESSE_INIT_MSK2;
-		phy_reserved |= PHY_VITESSE_INIT8;
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG3, phy_reserved)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG2, PHY_VITESSE_INIT9)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-		if (mii_rw(dev, np->phyaddr, PHY_VITESSE_INIT_REG1, PHY_VITESSE_INIT10)) {
-			printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-			return PHY_ERROR;
-		}
-	}
-	if (np->phy_oui == PHY_OUI_REALTEK) {
+	} else if (np->phy_oui == PHY_OUI_REALTEK) {
 		if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
 		    np->phy_rev == PHY_REV_REALTEK_8211B) {
 			/* reset could have cleared these out, set them back */
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-				return PHY_ERROR;
-			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+			if (init_realtek_8211b(dev, np)) {
+				netdev_info(dev, "%s: phy init failed\n",
+					    pci_name(np->pci_dev));
 				return PHY_ERROR;
 			}
-			if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
-				printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
+		} else if (np->phy_model == PHY_MODEL_REALTEK_8201) {
+			if (init_realtek_8201(dev, np) ||
+			    init_realtek_8201_cross(dev, np)) {
+				netdev_info(dev, "%s: phy init failed\n",
+					    pci_name(np->pci_dev));
 				return PHY_ERROR;
 			}
 		}
-		if (np->phy_model == PHY_MODEL_REALTEK_8201) {
-			if (np->driver_data & DEV_NEED_PHY_INIT_FIX) {
-				phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
-				phy_reserved |= PHY_REALTEK_INIT7;
-				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
-					printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-					return PHY_ERROR;
-				}
-			}
-			if (phy_cross == NV_CROSSOVER_DETECTION_DISABLED) {
-				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
-					printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-					return PHY_ERROR;
-				}
-				phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, MII_READ);
-				phy_reserved &= ~PHY_REALTEK_INIT_MSK1;
-				phy_reserved |= PHY_REALTEK_INIT3;
-				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, phy_reserved)) {
-					printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-					return PHY_ERROR;
-				}
-				if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
-					printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
-					return PHY_ERROR;
-				}
-			}
-		}
 	}
 
 	/* some phys clear out pause advertisment on reset, set it back */
@@ -1501,12 +1494,10 @@ static int phy_init(struct net_device *dev)
 	/* restart auto negotiation, power down phy */
 	mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
 	mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE);
-	if (phy_power_down) {
+	if (phy_power_down)
 		mii_control |= BMCR_PDOWN;
-	}
-	if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
+	if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control))
 		return PHY_ERROR;
-	}
 
 	return 0;
 }
@@ -1517,7 +1508,6 @@ static void nv_start_rx(struct net_device *dev)
 	u8 __iomem *base = get_hwbase(dev);
 	u32 rx_ctrl = readl(base + NvRegReceiverControl);
 
-	dprintk(KERN_DEBUG "%s: nv_start_rx\n", dev->name);
 	/* Already running? Stop it. */
 	if ((readl(base + NvRegReceiverControl) & NVREG_RCVCTL_START) && !np->mac_in_use) {
 		rx_ctrl &= ~NVREG_RCVCTL_START;
@@ -1526,12 +1516,10 @@ static void nv_start_rx(struct net_device *dev)
 	}
 	writel(np->linkspeed, base + NvRegLinkSpeed);
 	pci_push(base);
-        rx_ctrl |= NVREG_RCVCTL_START;
-        if (np->mac_in_use)
+	rx_ctrl |= NVREG_RCVCTL_START;
+	if (np->mac_in_use)
 		rx_ctrl &= ~NVREG_RCVCTL_RX_PATH_EN;
 	writel(rx_ctrl, base + NvRegReceiverControl);
-	dprintk(KERN_DEBUG "%s: nv_start_rx to duplex %d, speed 0x%08x.\n",
-				dev->name, np->duplex, np->linkspeed);
 	pci_push(base);
 }
 
@@ -1541,15 +1529,15 @@ static void nv_stop_rx(struct net_device *dev)
 	u8 __iomem *base = get_hwbase(dev);
 	u32 rx_ctrl = readl(base + NvRegReceiverControl);
 
-	dprintk(KERN_DEBUG "%s: nv_stop_rx\n", dev->name);
 	if (!np->mac_in_use)
 		rx_ctrl &= ~NVREG_RCVCTL_START;
 	else
 		rx_ctrl |= NVREG_RCVCTL_RX_PATH_EN;
 	writel(rx_ctrl, base + NvRegReceiverControl);
-	reg_delay(dev, NvRegReceiverStatus, NVREG_RCVSTAT_BUSY, 0,
-			NV_RXSTOP_DELAY1, NV_RXSTOP_DELAY1MAX,
-			KERN_INFO "nv_stop_rx: ReceiverStatus remained busy");
+	if (reg_delay(dev, NvRegReceiverStatus, NVREG_RCVSTAT_BUSY, 0,
+		      NV_RXSTOP_DELAY1, NV_RXSTOP_DELAY1MAX))
+		netdev_info(dev, "%s: ReceiverStatus remained busy\n",
+			    __func__);
 
 	udelay(NV_RXSTOP_DELAY2);
 	if (!np->mac_in_use)
@@ -1562,7 +1550,6 @@ static void nv_start_tx(struct net_device *dev)
 	u8 __iomem *base = get_hwbase(dev);
 	u32 tx_ctrl = readl(base + NvRegTransmitterControl);
 
-	dprintk(KERN_DEBUG "%s: nv_start_tx\n", dev->name);
 	tx_ctrl |= NVREG_XMITCTL_START;
 	if (np->mac_in_use)
 		tx_ctrl &= ~NVREG_XMITCTL_TX_PATH_EN;
@@ -1576,15 +1563,15 @@ static void nv_stop_tx(struct net_device *dev)
 	u8 __iomem *base = get_hwbase(dev);
 	u32 tx_ctrl = readl(base + NvRegTransmitterControl);
 
-	dprintk(KERN_DEBUG "%s: nv_stop_tx\n", dev->name);
 	if (!np->mac_in_use)
 		tx_ctrl &= ~NVREG_XMITCTL_START;
 	else
 		tx_ctrl |= NVREG_XMITCTL_TX_PATH_EN;
 	writel(tx_ctrl, base + NvRegTransmitterControl);
-	reg_delay(dev, NvRegTransmitterStatus, NVREG_XMITSTAT_BUSY, 0,
-			NV_TXSTOP_DELAY1, NV_TXSTOP_DELAY1MAX,
-			KERN_INFO "nv_stop_tx: TransmitterStatus remained busy");
+	if (reg_delay(dev, NvRegTransmitterStatus, NVREG_XMITSTAT_BUSY, 0,
+		      NV_TXSTOP_DELAY1, NV_TXSTOP_DELAY1MAX))
+		netdev_info(dev, "%s: TransmitterStatus remained busy\n",
+			    __func__);
 
 	udelay(NV_TXSTOP_DELAY2);
 	if (!np->mac_in_use)
@@ -1609,7 +1596,6 @@ static void nv_txrx_reset(struct net_device *dev)
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base = get_hwbase(dev);
 
-	dprintk(KERN_DEBUG "%s: nv_txrx_reset\n", dev->name);
 	writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->txrxctl_bits, base + NvRegTxRxControl);
 	pci_push(base);
 	udelay(NV_TXRX_RESET_DELAY);
@@ -1623,8 +1609,6 @@ static void nv_mac_reset(struct net_device *dev)
 	u8 __iomem *base = get_hwbase(dev);
 	u32 temp1, temp2, temp3;
 
-	dprintk(KERN_DEBUG "%s: nv_mac_reset\n", dev->name);
-
 	writel(NVREG_TXRXCTL_BIT2 | NVREG_TXRXCTL_RESET | np->txrxctl_bits, base + NvRegTxRxControl);
 	pci_push(base);
 
@@ -1745,7 +1729,7 @@ static struct net_device_stats *nv_get_stats(struct net_device *dev)
 static int nv_alloc_rx(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
-	struct ring_desc* less_rx;
+	struct ring_desc *less_rx;
 
 	less_rx = np->get_rx.orig;
 	if (less_rx-- == np->first_rx.orig)
@@ -1767,9 +1751,8 @@ static int nv_alloc_rx(struct net_device *dev)
 				np->put_rx.orig = np->first_rx.orig;
 			if (unlikely(np->put_rx_ctx++ == np->last_rx_ctx))
 				np->put_rx_ctx = np->first_rx_ctx;
-		} else {
+		} else
 			return 1;
-		}
 	}
 	return 0;
 }
@@ -1777,7 +1760,7 @@ static int nv_alloc_rx(struct net_device *dev)
 static int nv_alloc_rx_optimized(struct net_device *dev)
 {
 	struct fe_priv *np = netdev_priv(dev);
-	struct ring_desc_ex* less_rx;
+	struct ring_desc_ex *less_rx;
 
 	less_rx = np->get_rx.ex;
 	if (less_rx-- == np->first_rx.ex)
@@ -1800,9 +1783,8 @@ static int nv_alloc_rx_optimized(struct net_device *dev)
 				np->put_rx.ex = np->first_rx.ex;
 			if (unlikely(np->put_rx_ctx++ == np->last_rx_ctx))
 				np->put_rx_ctx = np->first_rx_ctx;
-		} else {
+		} else
 			return 1;
-		}
 	}
 	return 0;
 }
@@ -2018,24 +2000,24 @@ static void nv_legacybackoff_reseed(struct net_device *dev)
 
 /* Known Good seed sets */
 static const u32 main_seedset[BACKOFF_SEEDSET_ROWS][BACKOFF_SEEDSET_LFSRS] = {
-    {145, 155, 165, 175, 185, 196, 235, 245, 255, 265, 275, 285, 660, 690, 874},
-    {245, 255, 265, 575, 385, 298, 335, 345, 355, 366, 375, 385, 761, 790, 974},
-    {145, 155, 165, 175, 185, 196, 235, 245, 255, 265, 275, 285, 660, 690, 874},
-    {245, 255, 265, 575, 385, 298, 335, 345, 355, 366, 375, 386, 761, 790, 974},
-    {266, 265, 276, 585, 397, 208, 345, 355, 365, 376, 385, 396, 771, 700, 984},
-    {266, 265, 276, 586, 397, 208, 346, 355, 365, 376, 285, 396, 771, 700, 984},
-    {366, 365, 376, 686, 497, 308, 447, 455, 466, 476, 485, 496, 871, 800,  84},
-    {466, 465, 476, 786, 597, 408, 547, 555, 566, 576, 585, 597, 971, 900, 184}};
+	{145, 155, 165, 175, 185, 196, 235, 245, 255, 265, 275, 285, 660, 690, 874},
+	{245, 255, 265, 575, 385, 298, 335, 345, 355, 366, 375, 385, 761, 790, 974},
+	{145, 155, 165, 175, 185, 196, 235, 245, 255, 265, 275, 285, 660, 690, 874},
+	{245, 255, 265, 575, 385, 298, 335, 345, 355, 366, 375, 386, 761, 790, 974},
+	{266, 265, 276, 585, 397, 208, 345, 355, 365, 376, 385, 396, 771, 700, 984},
+	{266, 265, 276, 586, 397, 208, 346, 355, 365, 376, 285, 396, 771, 700, 984},
+	{366, 365, 376, 686, 497, 308, 447, 455, 466, 476, 485, 496, 871, 800,  84},
+	{466, 465, 476, 786, 597, 408, 547, 555, 566, 576, 585, 597, 971, 900, 184} };
 
 static const u32 gear_seedset[BACKOFF_SEEDSET_ROWS][BACKOFF_SEEDSET_LFSRS] = {
-    {251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375,  30, 295},
-    {351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
-    {351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 397},
-    {251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375,  30, 295},
-    {251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375,  30, 295},
-    {351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
-    {351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
-    {351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395}};
+	{251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375,  30, 295},
+	{351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
+	{351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 397},
+	{251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375,  30, 295},
+	{251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375,  30, 295},
+	{351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
+	{351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
+	{351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395} };
 
 static void nv_gear_backoff_reseed(struct net_device *dev)
 {
@@ -2083,13 +2065,12 @@ static void nv_gear_backoff_reseed(struct net_device *dev)
 	temp = NVREG_BKOFFCTRL_DEFAULT | (0 << NVREG_BKOFFCTRL_SELECT);
 	temp |= combinedSeed & NVREG_BKOFFCTRL_SEED_MASK;
 	temp |= combinedSeed >> NVREG_BKOFFCTRL_GEAR;
-	writel(temp,base + NvRegBackOffControl);
+	writel(temp, base + NvRegBackOffControl);
 
-    	/* Setup seeds for all gear LFSRs. */
+	/* Setup seeds for all gear LFSRs. */
 	get_random_bytes(&seedset, sizeof(seedset));
 	seedset = seedset % BACKOFF_SEEDSET_ROWS;
-	for (i = 1; i <= BACKOFF_SEEDSET_LFSRS; i++)
-	{
+	for (i = 1; i <= BACKOFF_SEEDSET_LFSRS; i++) {
 		temp = NVREG_BKOFFCTRL_DEFAULT | (i << NVREG_BKOFFCTRL_SELECT);
 		temp |= main_seedset[seedset][i-1] & 0x3ff;
 		temp |= ((gear_seedset[seedset][i-1] & 0x3ff) << NVREG_BKOFFCTRL_GEAR);
@@ -2113,10 +2094,10 @@ static netdev_tx_t nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	u32 size = skb_headlen(skb);
 	u32 entries = (size >> NV_TX2_TSO_MAX_SHIFT) + ((size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
 	u32 empty_slots;
-	struct ring_desc* put_tx;
-	struct ring_desc* start_tx;
-	struct ring_desc* prev_tx;
-	struct nv_skb_map* prev_tx_ctx;
+	struct ring_desc *put_tx;
+	struct ring_desc *start_tx;
+	struct ring_desc *prev_tx;
+	struct nv_skb_map *prev_tx_ctx;
 	unsigned long flags;
 
 	/* add fragments to entries count */
@@ -2204,18 +2185,6 @@ static netdev_tx_t nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	spin_unlock_irqrestore(&np->lock, flags);
 
-	dprintk(KERN_DEBUG "%s: nv_start_xmit: entries %d queued for transmission. tx_flags_extra: %x\n",
-		dev->name, entries, tx_flags_extra);
-	{
-		int j;
-		for (j=0; j<64; j++) {
-			if ((j%16) == 0)
-				dprintk("\n%03x:", j);
-			dprintk(" %02x", ((unsigned char*)skb->data)[j]);
-		}
-		dprintk("\n");
-	}
-
 	writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
 	return NETDEV_TX_OK;
 }
@@ -2233,11 +2202,11 @@ static netdev_tx_t nv_start_xmit_optimized(struct sk_buff *skb,
 	u32 size = skb_headlen(skb);
 	u32 entries = (size >> NV_TX2_TSO_MAX_SHIFT) + ((size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
 	u32 empty_slots;
-	struct ring_desc_ex* put_tx;
-	struct ring_desc_ex* start_tx;
-	struct ring_desc_ex* prev_tx;
-	struct nv_skb_map* prev_tx_ctx;
-	struct nv_skb_map* start_tx_ctx;
+	struct ring_desc_ex *put_tx;
+	struct ring_desc_ex *start_tx;
+	struct ring_desc_ex *prev_tx;
+	struct nv_skb_map *prev_tx_ctx;
+	struct nv_skb_map *start_tx_ctx;
 	unsigned long flags;
 
 	/* add fragments to entries count */
@@ -2355,18 +2324,6 @@ static netdev_tx_t nv_start_xmit_optimized(struct sk_buff *skb,
 
 	spin_unlock_irqrestore(&np->lock, flags);
 
-	dprintk(KERN_DEBUG "%s: nv_start_xmit_optimized: entries %d queued for transmission. tx_flags_extra: %x\n",
-		dev->name, entries, tx_flags_extra);
-	{
-		int j;
-		for (j=0; j<64; j++) {
-			if ((j%16) == 0)
-				dprintk("\n%03x:", j);
-			dprintk(" %02x", ((unsigned char*)skb->data)[j]);
-		}
-		dprintk("\n");
-	}
-
 	writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
 	return NETDEV_TX_OK;
 }
@@ -2399,15 +2356,12 @@ static int nv_tx_done(struct net_device *dev, int limit)
 	struct fe_priv *np = netdev_priv(dev);
 	u32 flags;
 	int tx_work = 0;
-	struct ring_desc* orig_get_tx = np->get_tx.orig;
+	struct ring_desc *orig_get_tx = np->get_tx.orig;
 
 	while ((np->get_tx.orig != np->put_tx.orig) &&
 	       !((flags = le32_to_cpu(np->get_tx.orig->flaglen)) & NV_TX_VALID) &&
 	       (tx_work < limit)) {
 
-		dprintk(KERN_DEBUG "%s: nv_tx_done: flags 0x%x.\n",
-					dev->name, flags);
-
 		nv_unmap_txskb(np, np->get_tx_ctx);
 
 		if (np->desc_ver == DESC_VER_1) {
@@ -2464,15 +2418,12 @@ static int nv_tx_done_optimized(struct net_device *dev, int limit)
 	struct fe_priv *np = netdev_priv(dev);
 	u32 flags;
 	int tx_work = 0;
-	struct ring_desc_ex* orig_get_tx = np->get_tx.ex;
+	struct ring_desc_ex *orig_get_tx = np->get_tx.ex;
 
 	while ((np->get_tx.ex != np->put_tx.ex) &&
 	       !((flags = le32_to_cpu(np->get_tx.ex->flaglen)) & NV_TX2_VALID) &&
 	       (tx_work < limit)) {
 
-		dprintk(KERN_DEBUG "%s: nv_tx_done_optimized: flags 0x%x.\n",
-					dev->name, flags);
-
 		nv_unmap_txskb(np, np->get_tx_ctx);
 
 		if (flags & NV_TX2_LASTPACKET) {
@@ -2491,9 +2442,8 @@ static int nv_tx_done_optimized(struct net_device *dev, int limit)
 			np->get_tx_ctx->skb = NULL;
 			tx_work++;
 
-			if (np->tx_limit) {
+			if (np->tx_limit)
 				nv_tx_flip_ownership(dev);
-			}
 		}
 		if (unlikely(np->get_tx.ex++ == np->last_tx.ex))
 			np->get_tx.ex = np->first_tx.ex;
@@ -2518,57 +2468,56 @@ static void nv_tx_timeout(struct net_device *dev)
 	u32 status;
 	union ring_type put_tx;
 	int saved_tx_limit;
+	int i;
 
 	if (np->msi_flags & NV_MSI_X_ENABLED)
 		status = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
 	else
 		status = readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK;
 
-	printk(KERN_INFO "%s: Got tx_timeout. irq: %08x\n", dev->name, status);
-
-	{
-		int i;
-
-		printk(KERN_INFO "%s: Ring at %lx\n",
-		       dev->name, (unsigned long)np->ring_addr);
-		printk(KERN_INFO "%s: Dumping tx registers\n", dev->name);
-		for (i=0;i<=np->register_size;i+= 32) {
-			printk(KERN_INFO "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
-					i,
-					readl(base + i + 0), readl(base + i + 4),
-					readl(base + i + 8), readl(base + i + 12),
-					readl(base + i + 16), readl(base + i + 20),
-					readl(base + i + 24), readl(base + i + 28));
-		}
-		printk(KERN_INFO "%s: Dumping tx ring\n", dev->name);
-		for (i=0;i<np->tx_ring_size;i+= 4) {
-			if (!nv_optimized(np)) {
-				printk(KERN_INFO "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
-				       i,
-				       le32_to_cpu(np->tx_ring.orig[i].buf),
-				       le32_to_cpu(np->tx_ring.orig[i].flaglen),
-				       le32_to_cpu(np->tx_ring.orig[i+1].buf),
-				       le32_to_cpu(np->tx_ring.orig[i+1].flaglen),
-				       le32_to_cpu(np->tx_ring.orig[i+2].buf),
-				       le32_to_cpu(np->tx_ring.orig[i+2].flaglen),
-				       le32_to_cpu(np->tx_ring.orig[i+3].buf),
-				       le32_to_cpu(np->tx_ring.orig[i+3].flaglen));
-			} else {
-				printk(KERN_INFO "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n",
-				       i,
-				       le32_to_cpu(np->tx_ring.ex[i].bufhigh),
-				       le32_to_cpu(np->tx_ring.ex[i].buflow),
-				       le32_to_cpu(np->tx_ring.ex[i].flaglen),
-				       le32_to_cpu(np->tx_ring.ex[i+1].bufhigh),
-				       le32_to_cpu(np->tx_ring.ex[i+1].buflow),
-				       le32_to_cpu(np->tx_ring.ex[i+1].flaglen),
-				       le32_to_cpu(np->tx_ring.ex[i+2].bufhigh),
-				       le32_to_cpu(np->tx_ring.ex[i+2].buflow),
-				       le32_to_cpu(np->tx_ring.ex[i+2].flaglen),
-				       le32_to_cpu(np->tx_ring.ex[i+3].bufhigh),
-				       le32_to_cpu(np->tx_ring.ex[i+3].buflow),
-				       le32_to_cpu(np->tx_ring.ex[i+3].flaglen));
-			}
+	netdev_info(dev, "Got tx_timeout. irq: %08x\n", status);
+
+	netdev_info(dev, "Ring at %lx\n", (unsigned long)np->ring_addr);
+	netdev_info(dev, "Dumping tx registers\n");
+	for (i = 0; i <= np->register_size; i += 32) {
+		netdev_info(dev,
+			    "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+			    i,
+			    readl(base + i + 0), readl(base + i + 4),
+			    readl(base + i + 8), readl(base + i + 12),
+			    readl(base + i + 16), readl(base + i + 20),
+			    readl(base + i + 24), readl(base + i + 28));
+	}
+	netdev_info(dev, "Dumping tx ring\n");
+	for (i = 0; i < np->tx_ring_size; i += 4) {
+		if (!nv_optimized(np)) {
+			netdev_info(dev,
+				    "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
+				    i,
+				    le32_to_cpu(np->tx_ring.orig[i].buf),
+				    le32_to_cpu(np->tx_ring.orig[i].flaglen),
+				    le32_to_cpu(np->tx_ring.orig[i+1].buf),
+				    le32_to_cpu(np->tx_ring.orig[i+1].flaglen),
+				    le32_to_cpu(np->tx_ring.orig[i+2].buf),
+				    le32_to_cpu(np->tx_ring.orig[i+2].flaglen),
+				    le32_to_cpu(np->tx_ring.orig[i+3].buf),
+				    le32_to_cpu(np->tx_ring.orig[i+3].flaglen));
+		} else {
+			netdev_info(dev,
+				    "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n",
+				    i,
+				    le32_to_cpu(np->tx_ring.ex[i].bufhigh),
+				    le32_to_cpu(np->tx_ring.ex[i].buflow),
+				    le32_to_cpu(np->tx_ring.ex[i].flaglen),
+				    le32_to_cpu(np->tx_ring.ex[i+1].bufhigh),
+				    le32_to_cpu(np->tx_ring.ex[i+1].buflow),
+				    le32_to_cpu(np->tx_ring.ex[i+1].flaglen),
+				    le32_to_cpu(np->tx_ring.ex[i+2].bufhigh),
+				    le32_to_cpu(np->tx_ring.ex[i+2].buflow),
+				    le32_to_cpu(np->tx_ring.ex[i+2].flaglen),
+				    le32_to_cpu(np->tx_ring.ex[i+3].bufhigh),
+				    le32_to_cpu(np->tx_ring.ex[i+3].buflow),
+				    le32_to_cpu(np->tx_ring.ex[i+3].flaglen));
 		}
 	}
 
@@ -2616,15 +2565,13 @@ static int nv_getlen(struct net_device *dev, void *packet, int datalen)
 	int protolen;	/* length as stored in the proto field */
 
 	/* 1) calculate len according to header */
-	if ( ((struct vlan_ethhdr *)packet)->h_vlan_proto == htons(ETH_P_8021Q)) {
-		protolen = ntohs( ((struct vlan_ethhdr *)packet)->h_vlan_encapsulated_proto );
+	if (((struct vlan_ethhdr *)packet)->h_vlan_proto == htons(ETH_P_8021Q)) {
+		protolen = ntohs(((struct vlan_ethhdr *)packet)->h_vlan_encapsulated_proto);
 		hdrlen = VLAN_HLEN;
 	} else {
-		protolen = ntohs( ((struct ethhdr *)packet)->h_proto);
+		protolen = ntohs(((struct ethhdr *)packet)->h_proto);
 		hdrlen = ETH_HLEN;
 	}
-	dprintk(KERN_DEBUG "%s: nv_getlen: datalen %d, protolen %d, hdrlen %d\n",
-				dev->name, datalen, protolen, hdrlen);
 	if (protolen > ETH_DATA_LEN)
 		return datalen; /* Value in proto field not a len, no checks possible */
 
@@ -2635,26 +2582,18 @@ static int nv_getlen(struct net_device *dev, void *packet, int datalen)
 			/* more data on wire than in 802 header, trim of
 			 * additional data.
 			 */
-			dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n",
-					dev->name, protolen);
 			return protolen;
 		} else {
 			/* less data on wire than mentioned in header.
 			 * Discard the packet.
 			 */
-			dprintk(KERN_DEBUG "%s: nv_getlen: discarding long packet.\n",
-					dev->name);
 			return -1;
 		}
 	} else {
 		/* short packet. Accept only if 802 values are also short */
 		if (protolen > ETH_ZLEN) {
-			dprintk(KERN_DEBUG "%s: nv_getlen: discarding short packet.\n",
-					dev->name);
 			return -1;
 		}
-		dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n",
-				dev->name, datalen);
 		return datalen;
 	}
 }
@@ -2667,13 +2606,10 @@ static int nv_rx_process(struct net_device *dev, int limit)
 	struct sk_buff *skb;
 	int len;
 
-	while((np->get_rx.orig != np->put_rx.orig) &&
+	while ((np->get_rx.orig != np->put_rx.orig) &&
 	      !((flags = le32_to_cpu(np->get_rx.orig->flaglen)) & NV_RX_AVAIL) &&
 		(rx_work < limit)) {
 
-		dprintk(KERN_DEBUG "%s: nv_rx_process: flags 0x%x.\n",
-					dev->name, flags);
-
 		/*
 		 * the packet is for us - immediately tear down the pci mapping.
 		 * TODO: check if a prefetch of the first cacheline improves
@@ -2685,16 +2621,6 @@ static int nv_rx_process(struct net_device *dev, int limit)
 		skb = np->get_rx_ctx->skb;
 		np->get_rx_ctx->skb = NULL;
 
-		{
-			int j;
-			dprintk(KERN_DEBUG "Dumping packet (flags 0x%x).",flags);
-			for (j=0; j<64; j++) {
-				if ((j%16) == 0)
-					dprintk("\n%03x:", j);
-				dprintk(" %02x", ((unsigned char*)skb->data)[j]);
-			}
-			dprintk("\n");
-		}
 		/* look at what we actually got: */
 		if (np->desc_ver == DESC_VER_1) {
 			if (likely(flags & NV_RX_DESCRIPTORVALID)) {
@@ -2710,9 +2636,8 @@ static int nv_rx_process(struct net_device *dev, int limit)
 					}
 					/* framing errors are soft errors */
 					else if ((flags & NV_RX_ERROR_MASK) == NV_RX_FRAMINGERR) {
-						if (flags & NV_RX_SUBSTRACT1) {
+						if (flags & NV_RX_SUBSTRACT1)
 							len--;
-						}
 					}
 					/* the rest are hard errors */
 					else {
@@ -2745,9 +2670,8 @@ static int nv_rx_process(struct net_device *dev, int limit)
 					}
 					/* framing errors are soft errors */
 					else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) {
-						if (flags & NV_RX2_SUBSTRACT1) {
+						if (flags & NV_RX2_SUBSTRACT1)
 							len--;
-						}
 					}
 					/* the rest are hard errors */
 					else {
@@ -2771,8 +2695,6 @@ static int nv_rx_process(struct net_device *dev, int limit)
 		/* got a valid packet - forward it to the network core */
 		skb_put(skb, len);
 		skb->protocol = eth_type_trans(skb, dev);
-		dprintk(KERN_DEBUG "%s: nv_rx_process: %d bytes, proto %d accepted.\n",
-					dev->name, len, skb->protocol);
 		napi_gro_receive(&np->napi, skb);
 		dev->stats.rx_packets++;
 		dev->stats.rx_bytes += len;
@@ -2797,13 +2719,10 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
 	struct sk_buff *skb;
 	int len;
 
-	while((np->get_rx.ex != np->put_rx.ex) &&
+	while ((np->get_rx.ex != np->put_rx.ex) &&
 	      !((flags = le32_to_cpu(np->get_rx.ex->flaglen)) & NV_RX2_AVAIL) &&
 	      (rx_work < limit)) {
 
-		dprintk(KERN_DEBUG "%s: nv_rx_process_optimized: flags 0x%x.\n",
-					dev->name, flags);
-
 		/*
 		 * the packet is for us - immediately tear down the pci mapping.
 		 * TODO: check if a prefetch of the first cacheline improves
@@ -2815,16 +2734,6 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
 		skb = np->get_rx_ctx->skb;
 		np->get_rx_ctx->skb = NULL;
 
-		{
-			int j;
-			dprintk(KERN_DEBUG "Dumping packet (flags 0x%x).",flags);
-			for (j=0; j<64; j++) {
-				if ((j%16) == 0)
-					dprintk("\n%03x:", j);
-				dprintk(" %02x", ((unsigned char*)skb->data)[j]);
-			}
-			dprintk("\n");
-		}
 		/* look at what we actually got: */
 		if (likely(flags & NV_RX2_DESCRIPTORVALID)) {
 			len = flags & LEN_MASK_V2;
@@ -2838,9 +2747,8 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
 				}
 				/* framing errors are soft errors */
 				else if ((flags & NV_RX2_ERROR_MASK) == NV_RX2_FRAMINGERR) {
-					if (flags & NV_RX2_SUBSTRACT1) {
+					if (flags & NV_RX2_SUBSTRACT1)
 						len--;
-					}
 				}
 				/* the rest are hard errors */
 				else {
@@ -2858,9 +2766,6 @@ static int nv_rx_process_optimized(struct net_device *dev, int limit)
 			skb->protocol = eth_type_trans(skb, dev);
 			prefetch(skb->data);
 
-			dprintk(KERN_DEBUG "%s: nv_rx_process_optimized: %d bytes, proto %d accepted.\n",
-				dev->name, len, skb->protocol);
-
 			if (likely(!np->vlangrp)) {
 				napi_gro_receive(&np->napi, skb);
 			} else {
@@ -2949,7 +2854,7 @@ static int nv_change_mtu(struct net_device *dev, int new_mtu)
 		/* reinit nic view of the rx queue */
 		writel(np->rx_buf_sz, base + NvRegOffloadConfig);
 		setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING);
-		writel( ((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
+		writel(((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
 			base + NvRegRingSizes);
 		pci_push(base);
 		writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
@@ -2986,7 +2891,7 @@ static void nv_copy_mac_to_hw(struct net_device *dev)
 static int nv_set_mac_address(struct net_device *dev, void *addr)
 {
 	struct fe_priv *np = netdev_priv(dev);
-	struct sockaddr *macaddr = (struct sockaddr*)addr;
+	struct sockaddr *macaddr = (struct sockaddr *)addr;
 
 	if (!is_valid_ether_addr(macaddr->sa_data))
 		return -EADDRNOTAVAIL;
@@ -3076,8 +2981,6 @@ static void nv_set_multicast(struct net_device *dev)
 	writel(mask[0], base + NvRegMulticastMaskA);
 	writel(mask[1], base + NvRegMulticastMaskB);
 	writel(pff, base + NvRegPacketFilterFlags);
-	dprintk(KERN_INFO "%s: reconfiguration for multicast lists.\n",
-		dev->name);
 	nv_start_rx(dev);
 	spin_unlock_irq(&np->lock);
 }
@@ -3152,8 +3055,6 @@ static int nv_update_linkspeed(struct net_device *dev)
 	mii_status = mii_rw(dev, np->phyaddr, MII_BMSR, MII_READ);
 
 	if (!(mii_status & BMSR_LSTATUS)) {
-		dprintk(KERN_DEBUG "%s: no link detected by phy - falling back to 10HD.\n",
-				dev->name);
 		newls = NVREG_LINKSPEED_FORCE|NVREG_LINKSPEED_10;
 		newdup = 0;
 		retval = 0;
@@ -3161,8 +3062,6 @@ static int nv_update_linkspeed(struct net_device *dev)
 	}
 
 	if (np->autoneg == 0) {
-		dprintk(KERN_DEBUG "%s: nv_update_linkspeed: autoneg off, PHY set to 0x%04x.\n",
-				dev->name, np->fixed_mode);
 		if (np->fixed_mode & LPA_100FULL) {
 			newls = NVREG_LINKSPEED_FORCE|NVREG_LINKSPEED_100;
 			newdup = 1;
@@ -3185,14 +3084,11 @@ static int nv_update_linkspeed(struct net_device *dev)
 		newls = NVREG_LINKSPEED_FORCE|NVREG_LINKSPEED_10;
 		newdup = 0;
 		retval = 0;
-		dprintk(KERN_DEBUG "%s: autoneg not completed - falling back to 10HD.\n", dev->name);
 		goto set_speed;
 	}
 
 	adv = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ);
 	lpa = mii_rw(dev, np->phyaddr, MII_LPA, MII_READ);
-	dprintk(KERN_DEBUG "%s: nv_update_linkspeed: PHY advertises 0x%04x, lpa 0x%04x.\n",
-				dev->name, adv, lpa);
 
 	retval = 1;
 	if (np->gigabit == PHY_GIGABIT) {
@@ -3201,8 +3097,6 @@ static int nv_update_linkspeed(struct net_device *dev)
 
 		if ((control_1000 & ADVERTISE_1000FULL) &&
 			(status_1000 & LPA_1000FULL)) {
-			dprintk(KERN_DEBUG "%s: nv_update_linkspeed: GBit ethernet detected.\n",
-				dev->name);
 			newls = NVREG_LINKSPEED_FORCE|NVREG_LINKSPEED_1000;
 			newdup = 1;
 			goto set_speed;
@@ -3224,7 +3118,6 @@ static int nv_update_linkspeed(struct net_device *dev)
 		newls = NVREG_LINKSPEED_FORCE|NVREG_LINKSPEED_10;
 		newdup = 0;
 	} else {
-		dprintk(KERN_DEBUG "%s: bad ability %04x - falling back to 10HD.\n", dev->name, adv_lpa);
 		newls = NVREG_LINKSPEED_FORCE|NVREG_LINKSPEED_10;
 		newdup = 0;
 	}
@@ -3233,9 +3126,6 @@ set_speed:
 	if (np->duplex == newdup && np->linkspeed == newls)
 		return retval;
 
-	dprintk(KERN_INFO "%s: changing link setting from %d/%d to %d/%d.\n",
-			dev->name, np->linkspeed, np->duplex, newls, newdup);
-
 	np->duplex = newdup;
 	np->linkspeed = newls;
 
@@ -3302,7 +3192,7 @@ set_speed:
 	}
 	writel(txreg, base + NvRegTxWatermark);
 
-	writel(NVREG_MISC1_FORCE | ( np->duplex ? 0 : NVREG_MISC1_HD),
+	writel(NVREG_MISC1_FORCE | (np->duplex ? 0 : NVREG_MISC1_HD),
 		base + NvRegMisc1);
 	pci_push(base);
 	writel(np->linkspeed, base + NvRegLinkSpeed);
@@ -3312,8 +3202,8 @@ set_speed:
 	/* setup pause frame */
 	if (np->duplex != 0) {
 		if (np->autoneg && np->pause_flags & NV_PAUSEFRAME_AUTONEG) {
-			adv_pause = adv & (ADVERTISE_PAUSE_CAP| ADVERTISE_PAUSE_ASYM);
-			lpa_pause = lpa & (LPA_PAUSE_CAP| LPA_PAUSE_ASYM);
+			adv_pause = adv & (ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
+			lpa_pause = lpa & (LPA_PAUSE_CAP | LPA_PAUSE_ASYM);
 
 			switch (adv_pause) {
 			case ADVERTISE_PAUSE_CAP:
@@ -3324,22 +3214,17 @@ set_speed:
 				}
 				break;
 			case ADVERTISE_PAUSE_ASYM:
-				if (lpa_pause == (LPA_PAUSE_CAP| LPA_PAUSE_ASYM))
-				{
+				if (lpa_pause == (LPA_PAUSE_CAP | LPA_PAUSE_ASYM))
 					pause_flags |= NV_PAUSEFRAME_TX_ENABLE;
-				}
 				break;
-			case ADVERTISE_PAUSE_CAP| ADVERTISE_PAUSE_ASYM:
-				if (lpa_pause & LPA_PAUSE_CAP)
-				{
+			case ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM:
+				if (lpa_pause & LPA_PAUSE_CAP) {
 					pause_flags |=  NV_PAUSEFRAME_RX_ENABLE;
 					if (np->pause_flags & NV_PAUSEFRAME_TX_REQ)
 						pause_flags |= NV_PAUSEFRAME_TX_ENABLE;
 				}
 				if (lpa_pause == LPA_PAUSE_ASYM)
-				{
 					pause_flags |= NV_PAUSEFRAME_RX_ENABLE;
-				}
 				break;
 			}
 		} else {
@@ -3361,14 +3246,14 @@ static void nv_linkchange(struct net_device *dev)
 	if (nv_update_linkspeed(dev)) {
 		if (!netif_carrier_ok(dev)) {
 			netif_carrier_on(dev);
-			printk(KERN_INFO "%s: link up.\n", dev->name);
+			netdev_info(dev, "link up\n");
 			nv_txrx_gate(dev, false);
 			nv_start_rx(dev);
 		}
 	} else {
 		if (netif_carrier_ok(dev)) {
 			netif_carrier_off(dev);
-			printk(KERN_INFO "%s: link down.\n", dev->name);
+			netdev_info(dev, "link down\n");
 			nv_txrx_gate(dev, true);
 			nv_stop_rx(dev);
 		}
@@ -3382,11 +3267,9 @@ static void nv_link_irq(struct net_device *dev)
 
 	miistat = readl(base + NvRegMIIStatus);
 	writel(NVREG_MIISTAT_LINKCHANGE, base + NvRegMIIStatus);
-	dprintk(KERN_INFO "%s: link change irq, status 0x%x.\n", dev->name, miistat);
 
 	if (miistat & (NVREG_MIISTAT_LINKCHANGE))
 		nv_linkchange(dev);
-	dprintk(KERN_DEBUG "%s: link change notification done.\n", dev->name);
 }
 
 static void nv_msi_workaround(struct fe_priv *np)
@@ -3437,8 +3320,6 @@ static irqreturn_t nv_nic_irq(int foo, void *data)
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base = get_hwbase(dev);
 
-	dprintk(KERN_DEBUG "%s: nv_nic_irq\n", dev->name);
-
 	if (!(np->msi_flags & NV_MSI_X_ENABLED)) {
 		np->events = readl(base + NvRegIrqStatus);
 		writel(np->events, base + NvRegIrqStatus);
@@ -3446,7 +3327,6 @@ static irqreturn_t nv_nic_irq(int foo, void *data)
 		np->events = readl(base + NvRegMSIXIrqStatus);
 		writel(np->events, base + NvRegMSIXIrqStatus);
 	}
-	dprintk(KERN_DEBUG "%s: irq: %08x\n", dev->name, np->events);
 	if (!(np->events & np->irqmask))
 		return IRQ_NONE;
 
@@ -3460,8 +3340,6 @@ static irqreturn_t nv_nic_irq(int foo, void *data)
 		__napi_schedule(&np->napi);
 	}
 
-	dprintk(KERN_DEBUG "%s: nv_nic_irq completed\n", dev->name);
-
 	return IRQ_HANDLED;
 }
 
@@ -3476,8 +3354,6 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data)
 	struct fe_priv *np = netdev_priv(dev);
 	u8 __iomem *base = get_hwbase(dev);
 
-	dprintk(KERN_DEBUG "%s: nv_nic_irq_optimized\n", dev->name);
-
 	if (!(np->msi_flags & NV_MSI_X_ENABLED)) {
 		np->events = readl(base + NvRegIrqStatus);
 		writel(np->events, base + NvRegIrqStatus);
@@ -3485,7 +3361,6 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data)
 		np->events = readl(base + NvRegMSIXIrqStatus);
 		writel(np->events, base + NvRegMSIXIrqStatus);
 	}
-	dprintk(KERN_DEBUG "%s: irq: %08x\n", dev->name, np->events);
 	if (!(np->events & np->irqmask))
 		return IRQ_NONE;
 
@@ -3498,7 +3373,6 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data)
 		writel(0, base + NvRegIrqMask);
 		__napi_schedule(&np->napi);
 	}
-	dprintk(KERN_DEBUG "%s: nv_nic_irq_optimized completed\n", dev->name);
 
 	return IRQ_HANDLED;
 }
@@ -3512,12 +3386,9 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data)
 	int i;
 	unsigned long flags;
 
-	dprintk(KERN_DEBUG "%s: nv_nic_irq_tx\n", dev->name);
-
-	for (i=0; ; i++) {
+	for (i = 0;; i++) {
 		events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_TX_ALL;
 		writel(NVREG_IRQ_TX_ALL, base + NvRegMSIXIrqStatus);
-		dprintk(KERN_DEBUG "%s: tx irq: %08x\n", dev->name, events);
 		if (!(events & np->irqmask))
 			break;
 
@@ -3536,12 +3407,12 @@ static irqreturn_t nv_nic_irq_tx(int foo, void *data)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			spin_unlock_irqrestore(&np->lock, flags);
-			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_tx.\n", dev->name, i);
+			netdev_dbg(dev, "%s: too many iterations (%d)\n",
+				   __func__, i);
 			break;
 		}
 
 	}
-	dprintk(KERN_DEBUG "%s: nv_nic_irq_tx completed\n", dev->name);
 
 	return IRQ_RETVAL(i);
 }
@@ -3553,7 +3424,7 @@ static int nv_napi_poll(struct napi_struct *napi, int budget)
 	u8 __iomem *base = get_hwbase(dev);
 	unsigned long flags;
 	int retcode;
-	int rx_count, tx_work=0, rx_work=0;
+	int rx_count, tx_work = 0, rx_work = 0;
 
 	do {
 		if (!nv_optimized(np)) {
@@ -3626,12 +3497,9 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data)
 	int i;
 	unsigned long flags;
 
-	dprintk(KERN_DEBUG "%s: nv_nic_irq_rx\n", dev->name);
-
-	for (i=0; ; i++) {
+	for (i = 0;; i++) {
 		events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_RX_ALL;
 		writel(NVREG_IRQ_RX_ALL, base + NvRegMSIXIrqStatus);
-		dprintk(KERN_DEBUG "%s: rx irq: %08x\n", dev->name, events);
 		if (!(events & np->irqmask))
 			break;
 
@@ -3655,11 +3523,11 @@ static irqreturn_t nv_nic_irq_rx(int foo, void *data)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			spin_unlock_irqrestore(&np->lock, flags);
-			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_rx.\n", dev->name, i);
+			netdev_dbg(dev, "%s: too many iterations (%d)\n",
+				   __func__, i);
 			break;
 		}
 	}
-	dprintk(KERN_DEBUG "%s: nv_nic_irq_rx completed\n", dev->name);
 
 	return IRQ_RETVAL(i);
 }
@@ -3673,12 +3541,9 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data)
 	int i;
 	unsigned long flags;
 
-	dprintk(KERN_DEBUG "%s: nv_nic_irq_other\n", dev->name);
-
-	for (i=0; ; i++) {
+	for (i = 0;; i++) {
 		events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_OTHER;
 		writel(NVREG_IRQ_OTHER, base + NvRegMSIXIrqStatus);
-		dprintk(KERN_DEBUG "%s: irq: %08x\n", dev->name, events);
 		if (!(events & np->irqmask))
 			break;
 
@@ -3723,12 +3588,12 @@ static irqreturn_t nv_nic_irq_other(int foo, void *data)
 				mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
 			}
 			spin_unlock_irqrestore(&np->lock, flags);
-			printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq_other.\n", dev->name, i);
+			netdev_dbg(dev, "%s: too many iterations (%d)\n",
+				   __func__, i);
 			break;
 		}
 
 	}
-	dprintk(KERN_DEBUG "%s: nv_nic_irq_other completed\n", dev->name);
 
 	return IRQ_RETVAL(i);
 }
@@ -3740,8 +3605,6 @@ static irqreturn_t nv_nic_irq_test(int foo, void *data)
 	u8 __iomem *base = get_hwbase(dev);
 	u32 events;
 
-	dprintk(KERN_DEBUG "%s: nv_nic_irq_test\n", dev->name);
-
 	if (!(np->msi_flags & NV_MSI_X_ENABLED)) {
 		events = readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK;
 		writel(NVREG_IRQ_TIMER, base + NvRegIrqStatus);
@@ -3750,7 +3613,6 @@ static irqreturn_t nv_nic_irq_test(int foo, void *data)
 		writel(NVREG_IRQ_TIMER, base + NvRegMSIXIrqStatus);
 	}
 	pci_push(base);
-	dprintk(KERN_DEBUG "%s: irq: %08x\n", dev->name, events);
 	if (!(events & NVREG_IRQ_TIMER))
 		return IRQ_RETVAL(0);
 
@@ -3760,8 +3622,6 @@ static irqreturn_t nv_nic_irq_test(int foo, void *data)
 	np->intr_test = 1;
 	spin_unlock(&np->lock);
 
-	dprintk(KERN_DEBUG "%s: nv_nic_irq_test completed\n", dev->name);
-
 	return IRQ_RETVAL(1);
 }
 
@@ -3776,17 +3636,15 @@ static void set_msix_vector_map(struct net_device *dev, u32 vector, u32 irqmask)
 	 * the remaining 8 interrupts.
 	 */
 	for (i = 0; i < 8; i++) {
-		if ((irqmask >> i) & 0x1) {
+		if ((irqmask >> i) & 0x1)
 			msixmap |= vector << (i << 2);
-		}
 	}
 	writel(readl(base + NvRegMSIXMap0) | msixmap, base + NvRegMSIXMap0);
 
 	msixmap = 0;
 	for (i = 0; i < 8; i++) {
-		if ((irqmask >> (i + 8)) & 0x1) {
+		if ((irqmask >> (i + 8)) & 0x1)
 			msixmap |= vector << (i << 2);
-		}
 	}
 	writel(readl(base + NvRegMSIXMap1) | msixmap, base + NvRegMSIXMap1);
 }
@@ -3809,17 +3667,19 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 	}
 
 	if (np->msi_flags & NV_MSI_X_CAPABLE) {
-		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
+		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++)
 			np->msi_x_entry[i].entry = i;
-		}
-		if ((ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK))) == 0) {
+		ret = pci_enable_msix(np->pci_dev, np->msi_x_entry, (np->msi_flags & NV_MSI_X_VECTORS_MASK));
+		if (ret == 0) {
 			np->msi_flags |= NV_MSI_X_ENABLED;
 			if (optimization_mode == NV_OPTIMIZATION_MODE_THROUGHPUT && !intr_test) {
 				/* Request irq for rx handling */
 				sprintf(np->name_rx, "%s-rx", dev->name);
 				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector,
 						nv_nic_irq_rx, IRQF_SHARED, np->name_rx, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for rx %d\n", ret);
+					netdev_info(dev,
+						    "request_irq failed for rx %d\n",
+						    ret);
 					pci_disable_msix(np->pci_dev);
 					np->msi_flags &= ~NV_MSI_X_ENABLED;
 					goto out_err;
@@ -3828,7 +3688,9 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 				sprintf(np->name_tx, "%s-tx", dev->name);
 				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_TX].vector,
 						nv_nic_irq_tx, IRQF_SHARED, np->name_tx, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for tx %d\n", ret);
+					netdev_info(dev,
+						    "request_irq failed for tx %d\n",
+						    ret);
 					pci_disable_msix(np->pci_dev);
 					np->msi_flags &= ~NV_MSI_X_ENABLED;
 					goto out_free_rx;
@@ -3837,7 +3699,9 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 				sprintf(np->name_other, "%s-other", dev->name);
 				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_OTHER].vector,
 						nv_nic_irq_other, IRQF_SHARED, np->name_other, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed for link %d\n", ret);
+					netdev_info(dev,
+						    "request_irq failed for link %d\n",
+						    ret);
 					pci_disable_msix(np->pci_dev);
 					np->msi_flags &= ~NV_MSI_X_ENABLED;
 					goto out_free_tx;
@@ -3851,7 +3715,9 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 			} else {
 				/* Request irq for all interrupts */
 				if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, handler, IRQF_SHARED, dev->name, dev) != 0) {
-					printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+					netdev_info(dev,
+						    "request_irq failed %d\n",
+						    ret);
 					pci_disable_msix(np->pci_dev);
 					np->msi_flags &= ~NV_MSI_X_ENABLED;
 					goto out_err;
@@ -3864,11 +3730,13 @@ static int nv_request_irq(struct net_device *dev, int intr_test)
 		}
 	}
 	if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
-		if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
+		ret = pci_enable_msi(np->pci_dev);
+		if (ret == 0) {
 			np->msi_flags |= NV_MSI_ENABLED;
 			dev->irq = np->pci_dev->irq;
 			if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0) {
-				printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
+				netdev_info(dev, "request_irq failed %d\n",
+					    ret);
 				pci_disable_msi(np->pci_dev);
 				np->msi_flags &= ~NV_MSI_ENABLED;
 				dev->irq = np->pci_dev->irq;
@@ -3903,9 +3771,8 @@ static void nv_free_irq(struct net_device *dev)
 	int i;
 
 	if (np->msi_flags & NV_MSI_X_ENABLED) {
-		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
+		for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++)
 			free_irq(np->msi_x_entry[i].vector, dev);
-		}
 		pci_disable_msix(np->pci_dev);
 		np->msi_flags &= ~NV_MSI_X_ENABLED;
 	} else {
@@ -3954,7 +3821,7 @@ static void nv_do_nic_poll(unsigned long data)
 
 	if (np->recover_error) {
 		np->recover_error = 0;
-		printk(KERN_INFO "%s: MAC in recoverable error state\n", dev->name);
+		netdev_info(dev, "MAC in recoverable error state\n");
 		if (netif_running(dev)) {
 			netif_tx_lock_bh(dev);
 			netif_addr_lock(dev);
@@ -3975,7 +3842,7 @@ static void nv_do_nic_poll(unsigned long data)
 			/* reinit nic view of the rx queue */
 			writel(np->rx_buf_sz, base + NvRegOffloadConfig);
 			setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING);
-			writel( ((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
+			writel(((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
 				base + NvRegRingSizes);
 			pci_push(base);
 			writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
@@ -4105,7 +3972,7 @@ static int nv_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	}
 
 	if (netif_carrier_ok(dev)) {
-		switch(np->linkspeed & (NVREG_LINKSPEED_MASK)) {
+		switch (np->linkspeed & (NVREG_LINKSPEED_MASK)) {
 		case NVREG_LINKSPEED_10:
 			ecmd->speed = SPEED_10;
 			break;
@@ -4250,14 +4117,14 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		}
 
 		if (netif_running(dev))
-			printk(KERN_INFO "%s: link down.\n", dev->name);
+			netdev_info(dev, "link down\n");
 		bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
 		if (np->phy_model == PHY_MODEL_MARVELL_E3016) {
 			bmcr |= BMCR_ANENABLE;
 			/* reset the phy in order for settings to stick,
 			 * and cause autoneg to start */
 			if (phy_reset(dev, bmcr)) {
-				printk(KERN_INFO "%s: phy reset failed\n", dev->name);
+				netdev_info(dev, "phy reset failed\n");
 				return -EINVAL;
 			}
 		} else {
@@ -4306,7 +4173,7 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		if (np->phy_oui == PHY_OUI_MARVELL) {
 			/* reset the phy in order for forced mode settings to stick */
 			if (phy_reset(dev, bmcr)) {
-				printk(KERN_INFO "%s: phy reset failed\n", dev->name);
+				netdev_info(dev, "phy reset failed\n");
 				return -EINVAL;
 			}
 		} else {
@@ -4344,7 +4211,7 @@ static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void
 
 	regs->version = FORCEDETH_REGS_VER;
 	spin_lock_irq(&np->lock);
-	for (i = 0;i <= np->register_size/sizeof(u32); i++)
+	for (i = 0; i <= np->register_size/sizeof(u32); i++)
 		rbuf[i] = readl(base + i*sizeof(u32));
 	spin_unlock_irq(&np->lock);
 }
@@ -4368,7 +4235,7 @@ static int nv_nway_reset(struct net_device *dev)
 			spin_unlock(&np->lock);
 			netif_addr_unlock(dev);
 			netif_tx_unlock_bh(dev);
-			printk(KERN_INFO "%s: link down.\n", dev->name);
+			netdev_info(dev, "link down\n");
 		}
 
 		bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
@@ -4376,7 +4243,7 @@ static int nv_nway_reset(struct net_device *dev)
 			bmcr |= BMCR_ANENABLE;
 			/* reset the phy in order for settings to stick*/
 			if (phy_reset(dev, bmcr)) {
-				printk(KERN_INFO "%s: phy reset failed\n", dev->name);
+				netdev_info(dev, "phy reset failed\n");
 				return -EINVAL;
 			}
 		} else {
@@ -4464,10 +4331,9 @@ static int nv_set_ringparam(struct net_device *dev, struct ethtool_ringparam* ri
 				pci_free_consistent(np->pci_dev, sizeof(struct ring_desc_ex) * (ring->rx_pending + ring->tx_pending),
 						    rxtx_ring, ring_addr);
 		}
-		if (rx_skbuff)
-			kfree(rx_skbuff);
-		if (tx_skbuff)
-			kfree(tx_skbuff);
+
+		kfree(rx_skbuff);
+		kfree(tx_skbuff);
 		goto exit;
 	}
 
@@ -4491,14 +4357,14 @@ static int nv_set_ringparam(struct net_device *dev, struct ethtool_ringparam* ri
 	np->tx_ring_size = ring->tx_pending;
 
 	if (!nv_optimized(np)) {
-		np->rx_ring.orig = (struct ring_desc*)rxtx_ring;
+		np->rx_ring.orig = (struct ring_desc *)rxtx_ring;
 		np->tx_ring.orig = &np->rx_ring.orig[np->rx_ring_size];
 	} else {
-		np->rx_ring.ex = (struct ring_desc_ex*)rxtx_ring;
+		np->rx_ring.ex = (struct ring_desc_ex *)rxtx_ring;
 		np->tx_ring.ex = &np->rx_ring.ex[np->rx_ring_size];
 	}
-	np->rx_skb = (struct nv_skb_map*)rx_skbuff;
-	np->tx_skb = (struct nv_skb_map*)tx_skbuff;
+	np->rx_skb = (struct nv_skb_map *)rx_skbuff;
+	np->tx_skb = (struct nv_skb_map *)tx_skbuff;
 	np->ring_addr = ring_addr;
 
 	memset(np->rx_skb, 0, sizeof(struct nv_skb_map) * np->rx_ring_size);
@@ -4515,7 +4381,7 @@ static int nv_set_ringparam(struct net_device *dev, struct ethtool_ringparam* ri
 		/* reinit nic view of the queues */
 		writel(np->rx_buf_sz, base + NvRegOffloadConfig);
 		setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING);
-		writel( ((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
+		writel(((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
 			base + NvRegRingSizes);
 		pci_push(base);
 		writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
@@ -4550,12 +4416,11 @@ static int nv_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam*
 
 	if ((!np->autoneg && np->duplex == 0) ||
 	    (np->autoneg && !pause->autoneg && np->duplex == 0)) {
-		printk(KERN_INFO "%s: can not set pause settings when forced link is in half duplex.\n",
-		       dev->name);
+		netdev_info(dev, "can not set pause settings when forced link is in half duplex\n");
 		return -EINVAL;
 	}
 	if (pause->tx_pause && !(np->pause_flags & NV_PAUSEFRAME_TX_CAPABLE)) {
-		printk(KERN_INFO "%s: hardware does not support tx pause frames.\n", dev->name);
+		netdev_info(dev, "hardware does not support tx pause frames\n");
 		return -EINVAL;
 	}
 
@@ -4590,7 +4455,7 @@ static int nv_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam*
 		mii_rw(dev, np->phyaddr, MII_ADVERTISE, adv);
 
 		if (netif_running(dev))
-			printk(KERN_INFO "%s: link down.\n", dev->name);
+			netdev_info(dev, "link down\n");
 		bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
 		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
 		mii_rw(dev, np->phyaddr, MII_BMCR, bmcr);
@@ -4841,7 +4706,7 @@ static int nv_loopback_test(struct net_device *dev)
 	/* reinit nic view of the rx queue */
 	writel(np->rx_buf_sz, base + NvRegOffloadConfig);
 	setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING);
-	writel( ((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
+	writel(((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
 		base + NvRegRingSizes);
 	pci_push(base);
 
@@ -4852,8 +4717,7 @@ static int nv_loopback_test(struct net_device *dev)
 	pkt_len = ETH_DATA_LEN;
 	tx_skb = dev_alloc_skb(pkt_len);
 	if (!tx_skb) {
-		printk(KERN_ERR "dev_alloc_skb() failed during loopback test"
-			 " of %s\n", dev->name);
+		netdev_err(dev, "dev_alloc_skb() failed during loopback test\n");
 		ret = 0;
 		goto out;
 	}
@@ -4893,29 +4757,22 @@ static int nv_loopback_test(struct net_device *dev)
 		if (flags & NV_RX_ERROR)
 			ret = 0;
 	} else {
-		if (flags & NV_RX2_ERROR) {
+		if (flags & NV_RX2_ERROR)
 			ret = 0;
-		}
 	}
 
 	if (ret) {
 		if (len != pkt_len) {
 			ret = 0;
-			dprintk(KERN_DEBUG "%s: loopback len mismatch %d vs %d\n",
-				dev->name, len, pkt_len);
 		} else {
 			rx_skb = np->rx_skb[0].skb;
 			for (i = 0; i < pkt_len; i++) {
 				if (rx_skb->data[i] != (u8)(i & 0xff)) {
 					ret = 0;
-					dprintk(KERN_DEBUG "%s: loopback pattern check failed on byte %d\n",
-						dev->name, i);
 					break;
 				}
 			}
 		}
-	} else {
-		dprintk(KERN_DEBUG "%s: loopback - did not receive test packet\n", dev->name);
 	}
 
 	pci_unmap_single(np->pci_dev, test_dma_addr,
@@ -4958,11 +4815,10 @@ static void nv_self_test(struct net_device *dev, struct ethtool_test *test, u64
 			netif_addr_lock(dev);
 			spin_lock_irq(&np->lock);
 			nv_disable_hw_interrupts(dev, np->irqmask);
-			if (!(np->msi_flags & NV_MSI_X_ENABLED)) {
+			if (!(np->msi_flags & NV_MSI_X_ENABLED))
 				writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
-			} else {
+			else
 				writel(NVREG_IRQSTAT_MASK, base + NvRegMSIXIrqStatus);
-			}
 			/* stop engines */
 			nv_stop_rxtx(dev);
 			nv_txrx_reset(dev);
@@ -5003,7 +4859,7 @@ static void nv_self_test(struct net_device *dev, struct ethtool_test *test, u64
 			/* reinit nic view of the rx queue */
 			writel(np->rx_buf_sz, base + NvRegOffloadConfig);
 			setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING);
-			writel( ((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
+			writel(((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
 				base + NvRegRingSizes);
 			pci_push(base);
 			writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
@@ -5106,8 +4962,7 @@ static int nv_mgmt_acquire_sema(struct net_device *dev)
 		    ((tx_ctrl & NVREG_XMITCTL_MGMT_SEMA_MASK) == NVREG_XMITCTL_MGMT_SEMA_FREE)) {
 			np->mgmt_sema = 1;
 			return 1;
-		}
-		else
+		} else
 			udelay(50);
 	}
 
@@ -5167,8 +5022,6 @@ static int nv_open(struct net_device *dev)
 	int oom, i;
 	u32 low;
 
-	dprintk(KERN_DEBUG "nv_open: begin\n");
-
 	/* power up phy */
 	mii_rw(dev, np->phyaddr, MII_BMCR,
 	       mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ) & ~BMCR_PDOWN);
@@ -5204,7 +5057,7 @@ static int nv_open(struct net_device *dev)
 
 	/* give hw rings */
 	setup_hw_rings(dev, NV_SETUP_RX_RING | NV_SETUP_TX_RING);
-	writel( ((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
+	writel(((np->rx_ring_size-1) << NVREG_RINGSZ_RXSHIFT) + ((np->tx_ring_size-1) << NVREG_RINGSZ_TXSHIFT),
 		base + NvRegRingSizes);
 
 	writel(np->linkspeed, base + NvRegLinkSpeed);
@@ -5216,9 +5069,11 @@ static int nv_open(struct net_device *dev)
 	writel(np->vlanctl_bits, base + NvRegVlanControl);
 	pci_push(base);
 	writel(NVREG_TXRXCTL_BIT1|np->txrxctl_bits, base + NvRegTxRxControl);
-	reg_delay(dev, NvRegUnknownSetupReg5, NVREG_UNKSETUP5_BIT31, NVREG_UNKSETUP5_BIT31,
-			NV_SETUP5_DELAY, NV_SETUP5_DELAYMAX,
-			KERN_INFO "open: SetupReg5, Bit 31 remained off\n");
+	if (reg_delay(dev, NvRegUnknownSetupReg5,
+		      NVREG_UNKSETUP5_BIT31, NVREG_UNKSETUP5_BIT31,
+		      NV_SETUP5_DELAY, NV_SETUP5_DELAYMAX))
+		netdev_info(dev,
+			    "%s: SetupReg5, Bit 31 remained off\n", __func__);
 
 	writel(0, base + NvRegMIIMask);
 	writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
@@ -5251,8 +5106,7 @@ static int nv_open(struct net_device *dev)
 			writel(NVREG_POLL_DEFAULT_THROUGHPUT, base + NvRegPollingInterval);
 		else
 			writel(NVREG_POLL_DEFAULT_CPU, base + NvRegPollingInterval);
-	}
-	else
+	} else
 		writel(poll_interval & 0xFFFF, base + NvRegPollingInterval);
 	writel(NVREG_UNKSETUP6_VAL, base + NvRegUnknownSetupReg6);
 	writel((np->phyaddr << NVREG_ADAPTCTL_PHYSHIFT)|NVREG_ADAPTCTL_PHYVALID|NVREG_ADAPTCTL_RUNNING,
@@ -5263,7 +5117,7 @@ static int nv_open(struct net_device *dev)
 		writel(NVREG_WAKEUPFLAGS_ENABLE , base + NvRegWakeUpFlags);
 
 	i = readl(base + NvRegPowerState);
-	if ( (i & NVREG_POWERSTATE_POWEREDUP) == 0)
+	if ((i & NVREG_POWERSTATE_POWEREDUP) == 0)
 		writel(NVREG_POWERSTATE_POWEREDUP|i, base + NvRegPowerState);
 
 	pci_push(base);
@@ -5276,9 +5130,8 @@ static int nv_open(struct net_device *dev)
 	writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
 	pci_push(base);
 
-	if (nv_request_irq(dev, 0)) {
+	if (nv_request_irq(dev, 0))
 		goto out_drain;
-	}
 
 	/* ask for interrupts */
 	nv_enable_hw_interrupts(dev, np->irqmask);
@@ -5296,7 +5149,6 @@ static int nv_open(struct net_device *dev)
 		u32 miistat;
 		miistat = readl(base + NvRegMIIStatus);
 		writel(NVREG_MIISTAT_MASK_ALL, base + NvRegMIIStatus);
-		dprintk(KERN_INFO "startup: got 0x%08x.\n", miistat);
 	}
 	/* set linkspeed to invalid value, thus force nv_update_linkspeed
 	 * to init hw */
@@ -5309,7 +5161,7 @@ static int nv_open(struct net_device *dev)
 	if (ret) {
 		netif_carrier_on(dev);
 	} else {
-		printk(KERN_INFO "%s: no link during initialization.\n", dev->name);
+		netdev_info(dev, "no link during initialization\n");
 		netif_carrier_off(dev);
 	}
 	if (oom)
@@ -5352,7 +5204,6 @@ static int nv_close(struct net_device *dev)
 	base = get_hwbase(dev);
 	nv_disable_hw_interrupts(dev, np->irqmask);
 	pci_push(base);
-	dprintk(KERN_INFO "%s: Irqmask is zero again\n", dev->name);
 
 	spin_unlock_irq(&np->lock);
 
@@ -5421,8 +5272,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	static int printed_version;
 
 	if (!printed_version++)
-		printk(KERN_INFO "%s: Reverse Engineered nForce ethernet"
-		       " driver. Version %s.\n", DRV_NAME, FORCEDETH_VERSION);
+		pr_info("Reverse Engineered nForce ethernet driver. Version %s.\n",
+			FORCEDETH_VERSION);
 
 	dev = alloc_etherdev(sizeof(struct fe_priv));
 	err = -ENOMEM;
@@ -5465,10 +5316,6 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	err = -EINVAL;
 	addr = 0;
 	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		dprintk(KERN_DEBUG "%s: resource %d start %p len %ld flags 0x%08lx.\n",
-				pci_name(pci_dev), i, (void*)pci_resource_start(pci_dev, i),
-				pci_resource_len(pci_dev, i),
-				pci_resource_flags(pci_dev, i));
 		if (pci_resource_flags(pci_dev, i) & IORESOURCE_MEM &&
 				pci_resource_len(pci_dev, i) >= np->register_size) {
 			addr = pci_resource_start(pci_dev, i);
@@ -5476,8 +5323,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		}
 	}
 	if (i == DEVICE_COUNT_RESOURCE) {
-		dev_printk(KERN_INFO, &pci_dev->dev,
-			   "Couldn't find register window\n");
+		dev_info(&pci_dev->dev, "Couldn't find register window\n");
 		goto out_relreg;
 	}
 
@@ -5493,13 +5339,13 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		np->txrxctl_bits = NVREG_TXRXCTL_DESC_3;
 		if (dma_64bit) {
 			if (pci_set_dma_mask(pci_dev, DMA_BIT_MASK(39)))
-				dev_printk(KERN_INFO, &pci_dev->dev,
-					"64-bit DMA failed, using 32-bit addressing\n");
+				dev_info(&pci_dev->dev,
+					 "64-bit DMA failed, using 32-bit addressing\n");
 			else
 				dev->features |= NETIF_F_HIGHDMA;
 			if (pci_set_consistent_dma_mask(pci_dev, DMA_BIT_MASK(39))) {
-				dev_printk(KERN_INFO, &pci_dev->dev,
-					"64-bit DMA (consistent) failed, using 32-bit ring buffers\n");
+				dev_info(&pci_dev->dev,
+					 "64-bit DMA (consistent) failed, using 32-bit ring buffers\n");
 			}
 		}
 	} else if (id->driver_data & DEV_HAS_LARGEDESC) {
@@ -5620,7 +5466,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		dev->dev_addr[4] = (np->orig_mac[0] >>  8) & 0xff;
 		dev->dev_addr[5] = (np->orig_mac[0] >>  0) & 0xff;
 		writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
-		printk(KERN_DEBUG "nv_probe: set workaround bit for reversed mac addr\n");
+		dev_dbg(&pci_dev->dev,
+			"%s: set workaround bit for reversed mac addr\n",
+			__func__);
 	}
 	memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
 
@@ -5629,17 +5477,14 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		 * Bad mac address. At least one bios sets the mac address
 		 * to 01:23:45:67:89:ab
 		 */
-		dev_printk(KERN_ERR, &pci_dev->dev,
-			"Invalid Mac address detected: %pM\n",
-		        dev->dev_addr);
-		dev_printk(KERN_ERR, &pci_dev->dev,
-			"Please complain to your hardware vendor. Switching to a random MAC.\n");
+		dev_err(&pci_dev->dev,
+			"Invalid MAC address detected: %pM - Please complain to your hardware vendor.\n",
+			dev->dev_addr);
 		random_ether_addr(dev->dev_addr);
+		dev_err(&pci_dev->dev,
+			"Using random MAC address: %pM\n", dev->dev_addr);
 	}
 
-	dprintk(KERN_DEBUG "%s: MAC Address %pM\n",
-		pci_name(pci_dev), dev->dev_addr);
-
 	/* set mac address */
 	nv_copy_mac_to_hw(dev);
 
@@ -5663,16 +5508,15 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		writel(powerstate, base + NvRegPowerState2);
 	}
 
-	if (np->desc_ver == DESC_VER_1) {
+	if (np->desc_ver == DESC_VER_1)
 		np->tx_flags = NV_TX_VALID;
-	} else {
+	else
 		np->tx_flags = NV_TX2_VALID;
-	}
 
 	np->msi_flags = 0;
-	if ((id->driver_data & DEV_HAS_MSI) && msi) {
+	if ((id->driver_data & DEV_HAS_MSI) && msi)
 		np->msi_flags |= NV_MSI_CAPABLE;
-	}
+
 	if ((id->driver_data & DEV_HAS_MSI_X) && msix) {
 		/* msix has had reported issues when modifying irqmask
 		   as in the case of napi, therefore, disable for now
@@ -5702,11 +5546,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	if (id->driver_data & DEV_NEED_TIMERIRQ)
 		np->irqmask |= NVREG_IRQ_TIMER;
 	if (id->driver_data & DEV_NEED_LINKTIMER) {
-		dprintk(KERN_INFO "%s: link timer on.\n", pci_name(pci_dev));
 		np->need_linktimer = 1;
 		np->link_timeout = jiffies + LINK_TIMEOUT;
 	} else {
-		dprintk(KERN_INFO "%s: link timer off.\n", pci_name(pci_dev));
 		np->need_linktimer = 0;
 	}
 
@@ -5735,19 +5577,14 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		    nv_mgmt_acquire_sema(dev) &&
 		    nv_mgmt_get_version(dev)) {
 			np->mac_in_use = 1;
-			if (np->mgmt_version > 0) {
+			if (np->mgmt_version > 0)
 				np->mac_in_use = readl(base + NvRegMgmtUnitControl) & NVREG_MGMTUNITCONTROL_INUSE;
-			}
-			dprintk(KERN_INFO "%s: mgmt unit is running. mac in use %x.\n",
-				pci_name(pci_dev), np->mac_in_use);
 			/* management unit setup the phy already? */
 			if (np->mac_in_use &&
 			    ((readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_SYNC_MASK) ==
 			     NVREG_XMITCTL_SYNC_PHY_INIT)) {
 				/* phy is inited by mgmt unit */
 				phyinitialized = 1;
-				dprintk(KERN_INFO "%s: Phy already initialized by mgmt unit.\n",
-					pci_name(pci_dev));
 			} else {
 				/* we need to init the phy */
 			}
@@ -5773,8 +5610,6 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		np->phy_model = id2 & PHYID2_MODEL_MASK;
 		id1 = (id1 & PHYID1_OUI_MASK) << PHYID1_OUI_SHFT;
 		id2 = (id2 & PHYID2_OUI_MASK) >> PHYID2_OUI_SHFT;
-		dprintk(KERN_DEBUG "%s: open: Found PHY %04x:%04x at address %d.\n",
-			pci_name(pci_dev), id1, id2, phyaddr);
 		np->phyaddr = phyaddr;
 		np->phy_oui = id1 | id2;
 
@@ -5788,8 +5623,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 		break;
 	}
 	if (i == 33) {
-		dev_printk(KERN_INFO, &pci_dev->dev,
-			"open: Could not find a valid PHY.\n");
+		dev_info(&pci_dev->dev, "open: Could not find a valid PHY\n");
 		goto out_error;
 	}
 
@@ -5799,9 +5633,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	} else {
 		/* see if it is a gigabit phy */
 		u32 mii_status = mii_rw(dev, np->phyaddr, MII_BMSR, MII_READ);
-		if (mii_status & PHY_GIGABIT) {
+		if (mii_status & PHY_GIGABIT)
 			np->gigabit = PHY_GIGABIT;
-		}
 	}
 
 	/* set default link speed settings */
@@ -5811,37 +5644,27 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 
 	err = register_netdev(dev);
 	if (err) {
-		dev_printk(KERN_INFO, &pci_dev->dev,
-			   "unable to register netdev: %d\n", err);
+		dev_info(&pci_dev->dev, "unable to register netdev: %d\n", err);
 		goto out_error;
 	}
 
-	dev_printk(KERN_INFO, &pci_dev->dev, "ifname %s, PHY OUI 0x%x @ %d, "
-		   "addr %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
-		   dev->name,
-		   np->phy_oui,
-		   np->phyaddr,
-		   dev->dev_addr[0],
-		   dev->dev_addr[1],
-		   dev->dev_addr[2],
-		   dev->dev_addr[3],
-		   dev->dev_addr[4],
-		   dev->dev_addr[5]);
-
-	dev_printk(KERN_INFO, &pci_dev->dev, "%s%s%s%s%s%s%s%s%s%sdesc-v%u\n",
-		   dev->features & NETIF_F_HIGHDMA ? "highdma " : "",
-		   dev->features & (NETIF_F_IP_CSUM | NETIF_F_SG) ?
-		   	"csum " : "",
-		   dev->features & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX) ?
-		   	"vlan " : "",
-		   id->driver_data & DEV_HAS_POWER_CNTRL ? "pwrctl " : "",
-		   id->driver_data & DEV_HAS_MGMT_UNIT ? "mgmt " : "",
-		   id->driver_data & DEV_NEED_TIMERIRQ ? "timirq " : "",
-		   np->gigabit == PHY_GIGABIT ? "gbit " : "",
-		   np->need_linktimer ? "lnktim " : "",
-		   np->msi_flags & NV_MSI_CAPABLE ? "msi " : "",
-		   np->msi_flags & NV_MSI_X_CAPABLE ? "msi-x " : "",
-		   np->desc_ver);
+	dev_info(&pci_dev->dev, "ifname %s, PHY OUI 0x%x @ %d, addr %pM\n",
+		 dev->name, np->phy_oui, np->phyaddr, dev->dev_addr);
+
+	dev_info(&pci_dev->dev, "%s%s%s%s%s%s%s%s%s%sdesc-v%u\n",
+		 dev->features & NETIF_F_HIGHDMA ? "highdma " : "",
+		 dev->features & (NETIF_F_IP_CSUM | NETIF_F_SG) ?
+			"csum " : "",
+		 dev->features & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX) ?
+			"vlan " : "",
+		 id->driver_data & DEV_HAS_POWER_CNTRL ? "pwrctl " : "",
+		 id->driver_data & DEV_HAS_MGMT_UNIT ? "mgmt " : "",
+		 id->driver_data & DEV_NEED_TIMERIRQ ? "timirq " : "",
+		 np->gigabit == PHY_GIGABIT ? "gbit " : "",
+		 np->need_linktimer ? "lnktim " : "",
+		 np->msi_flags & NV_MSI_CAPABLE ? "msi " : "",
+		 np->msi_flags & NV_MSI_X_CAPABLE ? "msi-x " : "",
+		 np->desc_ver);
 
 	return 0;
 
@@ -5931,13 +5754,13 @@ static int nv_suspend(struct pci_dev *pdev, pm_message_t state)
 	int i;
 
 	if (netif_running(dev)) {
-		// Gross.
+		/* Gross. */
 		nv_close(dev);
 	}
 	netif_device_detach(dev);
 
 	/* save non-pci configuration space */
-	for (i = 0;i <= np->register_size/sizeof(u32); i++)
+	for (i = 0; i <= np->register_size/sizeof(u32); i++)
 		np->saved_config_space[i] = readl(base + i*sizeof(u32));
 
 	pci_save_state(pdev);
@@ -5960,7 +5783,7 @@ static int nv_resume(struct pci_dev *pdev)
 	pci_enable_wake(pdev, PCI_D0, 0);
 
 	/* restore non-pci configuration space */
-	for (i = 0;i <= np->register_size/sizeof(u32); i++)
+	for (i = 0; i <= np->register_size/sizeof(u32); i++)
 		writel(np->saved_config_space[i], base+i*sizeof(u32));
 
 	if (np->driver_data & DEV_NEED_MSI_FIX)
@@ -5990,9 +5813,8 @@ static void nv_shutdown(struct pci_dev *pdev)
 	 * If we really go for poweroff, we must not restore the MAC,
 	 * otherwise the MAC for WOL will be reversed at least on some boards.
 	 */
-	if (system_state != SYSTEM_POWER_OFF) {
+	if (system_state != SYSTEM_POWER_OFF)
 		nv_restore_mac_addr(pdev);
-	}
 
 	pci_disable_device(pdev);
 	/*
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 49e4ce1246a..45c4b7bfcf3 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -143,7 +143,8 @@ void gfar_halt(struct net_device *dev);
 static void gfar_halt_nodisable(struct net_device *dev);
 void gfar_start(struct net_device *dev);
 static void gfar_clear_exact_match(struct net_device *dev);
-static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
+static void gfar_set_mac_for_addr(struct net_device *dev, int num,
+				  const u8 *addr);
 static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 
 MODULE_AUTHOR("Freescale Semiconductor, Inc");
@@ -577,11 +578,10 @@ static int gfar_parse_group(struct device_node *np,
 			irq_of_parse_and_map(np, 1);
 		priv->gfargrp[priv->num_grps].interruptError =
 			irq_of_parse_and_map(np,2);
-		if (priv->gfargrp[priv->num_grps].interruptTransmit < 0 ||
-			priv->gfargrp[priv->num_grps].interruptReceive < 0 ||
-			priv->gfargrp[priv->num_grps].interruptError < 0) {
+		if (priv->gfargrp[priv->num_grps].interruptTransmit == NO_IRQ ||
+		    priv->gfargrp[priv->num_grps].interruptReceive  == NO_IRQ ||
+		    priv->gfargrp[priv->num_grps].interruptError    == NO_IRQ)
 			return -EINVAL;
-		}
 	}
 
 	priv->gfargrp[priv->num_grps].grp_id = priv->num_grps;
@@ -3095,10 +3095,10 @@ static void gfar_set_multi(struct net_device *dev)
 static void gfar_clear_exact_match(struct net_device *dev)
 {
 	int idx;
-	u8 zero_arr[MAC_ADDR_LEN] = {0,0,0,0,0,0};
+	static const u8 zero_arr[MAC_ADDR_LEN] = {0, 0, 0, 0, 0, 0};
 
 	for(idx = 1;idx < GFAR_EM_NUM + 1;idx++)
-		gfar_set_mac_for_addr(dev, idx, (u8 *)zero_arr);
+		gfar_set_mac_for_addr(dev, idx, zero_arr);
 }
 
 /* Set the appropriate hash bit for the given addr */
@@ -3133,7 +3133,8 @@ static void gfar_set_hash_for_addr(struct net_device *dev, u8 *addr)
 /* There are multiple MAC Address register pairs on some controllers
  * This function sets the numth pair to a given address
  */
-static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr)
+static void gfar_set_mac_for_addr(struct net_device *dev, int num,
+				  const u8 *addr)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	struct gfar __iomem *regs = priv->gfargrp[0].regs;
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 5c566ebc54b..3bc8e276ba4 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -635,9 +635,10 @@ static int gfar_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	if (wol->wolopts & ~WAKE_MAGIC)
 		return -EINVAL;
 
+	device_set_wakeup_enable(&dev->dev, wol->wolopts & WAKE_MAGIC);
+
 	spin_lock_irqsave(&priv->bflock, flags);
-	priv->wol_en = wol->wolopts & WAKE_MAGIC ? 1 : 0;
-	device_set_wakeup_enable(&dev->dev, priv->wol_en);
+	priv->wol_en =  !!device_may_wakeup(&dev->dev);
 	spin_unlock_irqrestore(&priv->bflock, flags);
 
 	return 0;
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 9a6485892b3..80d25ed5334 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -1202,7 +1202,7 @@ static void hamachi_init_ring(struct net_device *dev)
 	}
 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
 	for (i = 0; i < RX_RING_SIZE; i++) {
-		struct sk_buff *skb = dev_alloc_skb(hmp->rx_buf_sz);
+		struct sk_buff *skb = dev_alloc_skb(hmp->rx_buf_sz + 2);
 		hmp->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
@@ -1669,7 +1669,7 @@ static int hamachi_rx(struct net_device *dev)
 		entry = hmp->dirty_rx % RX_RING_SIZE;
 		desc = &(hmp->rx_ring[entry]);
 		if (hmp->rx_skbuff[entry] == NULL) {
-			struct sk_buff *skb = dev_alloc_skb(hmp->rx_buf_sz);
+			struct sk_buff *skb = dev_alloc_skb(hmp->rx_buf_sz + 2);
 
 			hmp->rx_skbuff[entry] = skb;
 			if (skb == NULL)
diff --git a/drivers/net/hp.c b/drivers/net/hp.c
index d15d2f2ba78..ef2014375e6 100644
--- a/drivers/net/hp.c
+++ b/drivers/net/hp.c
@@ -162,9 +162,9 @@ static int __init hp_probe1(struct net_device *dev, int ioaddr)
 
 	/* Snarf the interrupt now.  Someday this could be moved to open(). */
 	if (dev->irq < 2) {
-		int irq_16list[] = { 11, 10, 5, 3, 4, 7, 9, 0};
-		int irq_8list[] = { 7, 5, 3, 4, 9, 0};
-		int *irqp = wordmode ? irq_16list : irq_8list;
+		static const int irq_16list[] = { 11, 10, 5, 3, 4, 7, 9, 0};
+		static const int irq_8list[] = { 7, 5, 3, 4, 9, 0};
+		const int *irqp = wordmode ? irq_16list : irq_8list;
 		do {
 			int irq = *irqp;
 			if (request_irq (irq, NULL, 0, "bogus", NULL) != -EBUSY) {
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 06bb9b79945..6d9275c52e0 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1279,7 +1279,7 @@ static void emac_force_link_update(struct emac_instance *dev)
 	netif_carrier_off(dev->ndev);
 	smp_rmb();
 	if (dev->link_polling) {
-		cancel_rearming_delayed_work(&dev->link_work);
+		cancel_delayed_work_sync(&dev->link_work);
 		if (dev->link_polling)
 			schedule_delayed_work(&dev->link_work,  PHY_POLL_LINK_OFF);
 	}
@@ -1294,7 +1294,7 @@ static int emac_close(struct net_device *ndev)
 
 	if (dev->phy.address >= 0) {
 		dev->link_polling = 0;
-		cancel_rearming_delayed_work(&dev->link_work);
+		cancel_delayed_work_sync(&dev->link_work);
 	}
 	mutex_lock(&dev->link_lock);
 	emac_netif_stop(dev);
@@ -2950,7 +2950,7 @@ static int __devexit emac_remove(struct platform_device *ofdev)
 
 	unregister_netdev(dev->ndev);
 
-	flush_scheduled_work();
+	cancel_work_sync(&dev->reset_work);
 
 	if (emac_has_feature(dev, EMAC_FTR_HAS_TAH))
 		tah_detach(dev->tah_dev, dev->tah_port);
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index c454b45ca7e..5522d459654 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -729,11 +729,6 @@ static void netdev_get_drvinfo(struct net_device *dev,
 		sizeof(info->version) - 1);
 }
 
-static u32 netdev_get_link(struct net_device *dev)
-{
-	return 1;
-}
-
 static void ibmveth_set_rx_csum_flags(struct net_device *dev, u32 data)
 {
 	struct ibmveth_adapter *adapter = netdev_priv(dev);
@@ -918,7 +913,7 @@ static void ibmveth_get_ethtool_stats(struct net_device *dev,
 static const struct ethtool_ops netdev_ethtool_ops = {
 	.get_drvinfo		= netdev_get_drvinfo,
 	.get_settings		= netdev_get_settings,
-	.get_link		= netdev_get_link,
+	.get_link		= ethtool_op_get_link,
 	.set_tx_csum		= ibmveth_set_tx_csum,
 	.get_rx_csum		= ibmveth_get_rx_csum,
 	.set_rx_csum		= ibmveth_set_rx_csum,
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index ab9f675c5b8..e07d487f015 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -36,22 +36,10 @@
 #include <net/pkt_sched.h>
 #include <net/net_namespace.h>
 
-#define TX_TIMEOUT  (2*HZ)
-
 #define TX_Q_LIMIT    32
 struct ifb_private {
 	struct tasklet_struct   ifb_tasklet;
 	int     tasklet_pending;
-	/* mostly debug stats leave in for now */
-	unsigned long   st_task_enter; /* tasklet entered */
-	unsigned long   st_txq_refl_try; /* transmit queue refill attempt */
-	unsigned long   st_rxq_enter; /* receive queue entered */
-	unsigned long   st_rx2tx_tran; /* receive to trasmit transfers */
-	unsigned long   st_rxq_notenter; /*receiveQ not entered, resched */
-	unsigned long   st_rx_frm_egr; /* received from egress path */
-	unsigned long   st_rx_frm_ing; /* received from ingress path */
-	unsigned long   st_rxq_check;
-	unsigned long   st_rxq_rsch;
 	struct sk_buff_head     rq;
 	struct sk_buff_head     tq;
 };
@@ -73,24 +61,17 @@ static void ri_tasklet(unsigned long dev)
 	struct sk_buff *skb;
 
 	txq = netdev_get_tx_queue(_dev, 0);
-	dp->st_task_enter++;
 	if ((skb = skb_peek(&dp->tq)) == NULL) {
-		dp->st_txq_refl_try++;
 		if (__netif_tx_trylock(txq)) {
-			dp->st_rxq_enter++;
-			while ((skb = skb_dequeue(&dp->rq)) != NULL) {
-				skb_queue_tail(&dp->tq, skb);
-				dp->st_rx2tx_tran++;
-			}
+			skb_queue_splice_tail_init(&dp->rq, &dp->tq);
 			__netif_tx_unlock(txq);
 		} else {
 			/* reschedule */
-			dp->st_rxq_notenter++;
 			goto resched;
 		}
 	}
 
-	while ((skb = skb_dequeue(&dp->tq)) != NULL) {
+	while ((skb = __skb_dequeue(&dp->tq)) != NULL) {
 		u32 from = G_TC_FROM(skb->tc_verd);
 
 		skb->tc_verd = 0;
@@ -104,30 +85,28 @@ static void ri_tasklet(unsigned long dev)
 			rcu_read_unlock();
 			dev_kfree_skb(skb);
 			stats->tx_dropped++;
+			if (skb_queue_len(&dp->tq) != 0)
+				goto resched;
 			break;
 		}
 		rcu_read_unlock();
 		skb->skb_iif = _dev->ifindex;
 
 		if (from & AT_EGRESS) {
-			dp->st_rx_frm_egr++;
 			dev_queue_xmit(skb);
 		} else if (from & AT_INGRESS) {
-			dp->st_rx_frm_ing++;
 			skb_pull(skb, skb->dev->hard_header_len);
-			netif_rx(skb);
+			netif_receive_skb(skb);
 		} else
 			BUG();
 	}
 
 	if (__netif_tx_trylock(txq)) {
-		dp->st_rxq_check++;
 		if ((skb = skb_peek(&dp->rq)) == NULL) {
 			dp->tasklet_pending = 0;
 			if (netif_queue_stopped(_dev))
 				netif_wake_queue(_dev);
 		} else {
-			dp->st_rxq_rsch++;
 			__netif_tx_unlock(txq);
 			goto resched;
 		}
@@ -147,6 +126,10 @@ static const struct net_device_ops ifb_netdev_ops = {
 	.ndo_validate_addr = eth_validate_addr,
 };
 
+#define IFB_FEATURES (NETIF_F_NO_CSUM | NETIF_F_SG  | NETIF_F_FRAGLIST	| \
+		      NETIF_F_TSO_ECN | NETIF_F_TSO | NETIF_F_TSO6	| \
+		      NETIF_F_HIGHDMA | NETIF_F_HW_VLAN_TX)
+
 static void ifb_setup(struct net_device *dev)
 {
 	/* Initialize the device structure. */
@@ -157,6 +140,9 @@ static void ifb_setup(struct net_device *dev)
 	ether_setup(dev);
 	dev->tx_queue_len = TX_Q_LIMIT;
 
+	dev->features |= IFB_FEATURES;
+	dev->vlan_features |= IFB_FEATURES;
+
 	dev->flags |= IFF_NOARP;
 	dev->flags &= ~IFF_MULTICAST;
 	dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
@@ -182,7 +168,7 @@ static netdev_tx_t ifb_xmit(struct sk_buff *skb, struct net_device *dev)
 		netif_stop_queue(dev);
 	}
 
-	skb_queue_tail(&dp->rq, skb);
+	__skb_queue_tail(&dp->rq, skb);
 	if (!dp->tasklet_pending) {
 		dp->tasklet_pending = 1;
 		tasklet_schedule(&dp->ifb_tasklet);
@@ -197,8 +183,8 @@ static int ifb_close(struct net_device *dev)
 
 	tasklet_kill(&dp->ifb_tasklet);
 	netif_stop_queue(dev);
-	skb_queue_purge(&dp->rq);
-	skb_queue_purge(&dp->tq);
+	__skb_queue_purge(&dp->rq);
+	__skb_queue_purge(&dp->tq);
 	return 0;
 }
 
@@ -207,8 +193,8 @@ static int ifb_open(struct net_device *dev)
 	struct ifb_private *dp = netdev_priv(dev);
 
 	tasklet_init(&dp->ifb_tasklet, ri_tasklet, (unsigned long)dev);
-	skb_queue_head_init(&dp->rq);
-	skb_queue_head_init(&dp->tq);
+	__skb_queue_head_init(&dp->rq);
+	__skb_queue_head_init(&dp->tq);
 	netif_start_queue(dev);
 
 	return 0;
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index bc183f5487c..0a2368fa6bc 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -134,6 +134,8 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 	case E1000_DEV_ID_82580_COPPER_DUAL:
 	case E1000_DEV_ID_DH89XXCC_SGMII:
 	case E1000_DEV_ID_DH89XXCC_SERDES:
+	case E1000_DEV_ID_DH89XXCC_BACKPLANE:
+	case E1000_DEV_ID_DH89XXCC_SFP:
 		mac->type = e1000_82580;
 		break;
 	case E1000_DEV_ID_I350_COPPER:
@@ -1478,6 +1480,39 @@ out:
 }
 
 /**
+ *  igb_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
+ *  @hw: pointer to the hardware struct
+ *  @enable: state to enter, either enabled or disabled
+ *  @pf: Physical Function pool - do not set anti-spoofing for the PF
+ *
+ *  enables/disables L2 switch anti-spoofing functionality.
+ **/
+void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
+{
+	u32 dtxswc;
+
+	switch (hw->mac.type) {
+	case e1000_82576:
+	case e1000_i350:
+		dtxswc = rd32(E1000_DTXSWC);
+		if (enable) {
+			dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
+				   E1000_DTXSWC_VLAN_SPOOF_MASK);
+			/* The PF can spoof - it has to in order to
+			 * support emulation mode NICs */
+			dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
+		} else {
+			dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
+				    E1000_DTXSWC_VLAN_SPOOF_MASK);
+		}
+		wr32(E1000_DTXSWC, dtxswc);
+		break;
+	default:
+		break;
+	}
+}
+
+/**
  *  igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
  *  @hw: pointer to the hardware struct
  *  @enable: state to enter, either enabled or disabled
@@ -1578,7 +1613,7 @@ static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw)
 {
 	s32 ret_val = 0;
 	u32 mdicnfg;
-	u16 nvm_data;
+	u16 nvm_data = 0;
 
 	if (hw->mac.type != e1000_82580)
 		goto out;
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index cbd1e1259e4..1d01af2472e 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -194,6 +194,10 @@ struct e1000_adv_tx_context_desc {
 #define E1000_NVM_APME_82575          0x0400
 #define MAX_NUM_VFS                   8
 
+#define E1000_DTXSWC_MAC_SPOOF_MASK   0x000000FF /* Per VF MAC spoof control */
+#define E1000_DTXSWC_VLAN_SPOOF_MASK  0x0000FF00 /* Per VF VLAN spoof control */
+#define E1000_DTXSWC_LLE_MASK         0x00FF0000 /* Per VF Local LB enables */
+#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8
 #define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31)  /* global VF LB enable */
 
 /* Easy defines for setting default pool, would normally be left a zero */
@@ -243,6 +247,7 @@ struct e1000_adv_tx_context_desc {
 
 /* RX packet buffer size defines */
 #define E1000_RXPBS_SIZE_MASK_82576  0x0000007F
+void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *, bool, int);
 void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
 void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
 u16 igb_rxpbs_adjust_82580(u32 data);
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index 62222796a8b..6319ed902bc 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -419,6 +419,9 @@
 #define E1000_ERR_SWFW_SYNC 13
 #define E1000_NOT_IMPLEMENTED 14
 #define E1000_ERR_MBX      15
+#define E1000_ERR_INVALID_ARGUMENT  16
+#define E1000_ERR_NO_SPACE          17
+#define E1000_ERR_NVM_PBA_SECTION   18
 
 /* Loop limit on how long we wait for auto-negotiation to complete */
 #define COPPER_LINK_UP_LIMIT              10
@@ -580,11 +583,15 @@
 
 /* Mask bits for fields in Word 0x1a of the NVM */
 
+/* length of string needed to store part num */
+#define E1000_PBANUM_LENGTH         11
+
 /* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
 #define NVM_SUM                    0xBABA
 
 #define NVM_PBA_OFFSET_0           8
 #define NVM_PBA_OFFSET_1           9
+#define NVM_PBA_PTR_GUARD          0xFAFA
 #define NVM_WORD_SIZE_BASE_SHIFT   6
 
 /* NVM Commands - Microwire */
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index c0b017f8d78..e2638afb8cd 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -54,8 +54,10 @@ struct e1000_hw;
 #define E1000_DEV_ID_82580_SERDES             0x1510
 #define E1000_DEV_ID_82580_SGMII              0x1511
 #define E1000_DEV_ID_82580_COPPER_DUAL        0x1516
-#define E1000_DEV_ID_DH89XXCC_SGMII           0x0436
-#define E1000_DEV_ID_DH89XXCC_SERDES          0x0438
+#define E1000_DEV_ID_DH89XXCC_SGMII           0x0438
+#define E1000_DEV_ID_DH89XXCC_SERDES          0x043A
+#define E1000_DEV_ID_DH89XXCC_BACKPLANE       0x043C
+#define E1000_DEV_ID_DH89XXCC_SFP             0x0440
 #define E1000_DEV_ID_I350_COPPER              0x1521
 #define E1000_DEV_ID_I350_FIBER               0x1522
 #define E1000_DEV_ID_I350_SERDES              0x1523
diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c
index d83b77fa403..6b5cc2cc453 100644
--- a/drivers/net/igb/e1000_nvm.c
+++ b/drivers/net/igb/e1000_nvm.c
@@ -445,31 +445,112 @@ out:
 }
 
 /**
- *  igb_read_part_num - Read device part number
+ *  igb_read_part_string - Read device part number
  *  @hw: pointer to the HW structure
  *  @part_num: pointer to device part number
+ *  @part_num_size: size of part number buffer
  *
  *  Reads the product board assembly (PBA) number from the EEPROM and stores
  *  the value in part_num.
  **/
-s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num)
+s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size)
 {
-	s32  ret_val;
+	s32 ret_val;
 	u16 nvm_data;
+	u16 pointer;
+	u16 offset;
+	u16 length;
+
+	if (part_num == NULL) {
+		hw_dbg("PBA string buffer was null\n");
+		ret_val = E1000_ERR_INVALID_ARGUMENT;
+		goto out;
+	}
 
 	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
 	if (ret_val) {
 		hw_dbg("NVM Read Error\n");
 		goto out;
 	}
-	*part_num = (u32)(nvm_data << 16);
 
-	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &nvm_data);
+	ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer);
+	if (ret_val) {
+		hw_dbg("NVM Read Error\n");
+		goto out;
+	}
+
+	/*
+	 * if nvm_data is not ptr guard the PBA must be in legacy format which
+	 * means pointer is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (nvm_data != NVM_PBA_PTR_GUARD) {
+		hw_dbg("NVM PBA number is not stored as string\n");
+
+		/* we will need 11 characters to store the PBA */
+		if (part_num_size < 11) {
+			hw_dbg("PBA string buffer too small\n");
+			return E1000_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pointer */
+		part_num[0] = (nvm_data >> 12) & 0xF;
+		part_num[1] = (nvm_data >> 8) & 0xF;
+		part_num[2] = (nvm_data >> 4) & 0xF;
+		part_num[3] = nvm_data & 0xF;
+		part_num[4] = (pointer >> 12) & 0xF;
+		part_num[5] = (pointer >> 8) & 0xF;
+		part_num[6] = '-';
+		part_num[7] = 0;
+		part_num[8] = (pointer >> 4) & 0xF;
+		part_num[9] = pointer & 0xF;
+
+		/* put a null character on the end of our string */
+		part_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (part_num[offset] < 0xA)
+				part_num[offset] += '0';
+			else if (part_num[offset] < 0x10)
+				part_num[offset] += 'A' - 0xA;
+		}
+
+		goto out;
+	}
+
+	ret_val = hw->nvm.ops.read(hw, pointer, 1, &length);
 	if (ret_val) {
 		hw_dbg("NVM Read Error\n");
 		goto out;
 	}
-	*part_num |= nvm_data;
+
+	if (length == 0xFFFF || length == 0) {
+		hw_dbg("NVM PBA number section invalid length\n");
+		ret_val = E1000_ERR_NVM_PBA_SECTION;
+		goto out;
+	}
+	/* check if part_num buffer is big enough */
+	if (part_num_size < (((u32)length * 2) - 1)) {
+		hw_dbg("PBA string buffer too small\n");
+		ret_val = E1000_ERR_NO_SPACE;
+		goto out;
+	}
+
+	/* trim pba length from start of string */
+	pointer++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = hw->nvm.ops.read(hw, pointer + offset, 1, &nvm_data);
+		if (ret_val) {
+			hw_dbg("NVM Read Error\n");
+			goto out;
+		}
+		part_num[offset * 2] = (u8)(nvm_data >> 8);
+		part_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+	}
+	part_num[offset * 2] = '\0';
 
 out:
 	return ret_val;
diff --git a/drivers/net/igb/e1000_nvm.h b/drivers/net/igb/e1000_nvm.h
index 1041c34dcbe..29c956a84bd 100644
--- a/drivers/net/igb/e1000_nvm.h
+++ b/drivers/net/igb/e1000_nvm.h
@@ -32,6 +32,8 @@ s32  igb_acquire_nvm(struct e1000_hw *hw);
 void igb_release_nvm(struct e1000_hw *hw);
 s32  igb_read_mac_addr(struct e1000_hw *hw);
 s32  igb_read_part_num(struct e1000_hw *hw, u32 *part_num);
+s32  igb_read_part_string(struct e1000_hw *hw, u8 *part_num,
+                          u32 part_num_size);
 s32  igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
 s32  igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
 s32  igb_validate_nvm_checksum(struct e1000_hw *hw);
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index ddd036a7899..6694bf3e5ad 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -1757,11 +1757,12 @@ s32 igb_get_cable_length_igp_2(struct e1000_hw *hw)
 	u16 phy_data, i, agc_value = 0;
 	u16 cur_agc_index, max_agc_index = 0;
 	u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
-	u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
-							 {IGP02E1000_PHY_AGC_A,
-							  IGP02E1000_PHY_AGC_B,
-							  IGP02E1000_PHY_AGC_C,
-							  IGP02E1000_PHY_AGC_D};
+	static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+	       IGP02E1000_PHY_AGC_A,
+	       IGP02E1000_PHY_AGC_B,
+	       IGP02E1000_PHY_AGC_C,
+	       IGP02E1000_PHY_AGC_D
+	};
 
 	/* Read the AGC registers for all channels */
 	for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index abb7333a1fb..8ac83c5190d 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -301,6 +301,7 @@
 #define E1000_VFTE      0x00C90 /* VF Transmit Enables */
 #define E1000_QDE       0x02408 /* Queue Drop Enable - RW */
 #define E1000_DTXSWC    0x03500 /* DMA Tx Switch Control - RW */
+#define E1000_WVBR      0x03554 /* VM Wrong Behavior - RWS */
 #define E1000_RPLOLR    0x05AF0 /* Replication Offload - RW */
 #define E1000_UTA       0x0A000 /* Unicast Table Array - RW */
 #define E1000_IOVTCL    0x05BBC /* IOV Control Register */
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index edab9c44239..92a4ef09e55 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -324,6 +324,7 @@ struct igb_adapter {
 	unsigned int vfs_allocated_count;
 	struct vf_data_storage *vf_data;
 	u32 rss_queues;
+	u32 wvbr;
 };
 
 #define IGB_FLAG_HAS_MSI           (1 << 0)
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 892d196f17a..58c665b7513 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -73,6 +73,8 @@ static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
@@ -1654,7 +1656,7 @@ void igb_reset(struct igb_adapter *adapter)
 	if (adapter->vfs_allocated_count) {
 		int i;
 		for (i = 0 ; i < adapter->vfs_allocated_count; i++)
-			adapter->vf_data[i].flags = 0;
+			adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
 
 		/* ping all the active vfs to let them know we are going down */
 		igb_ping_all_vfs(adapter);
@@ -1729,12 +1731,13 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	struct igb_adapter *adapter;
 	struct e1000_hw *hw;
 	u16 eeprom_data = 0;
+	s32 ret_val;
 	static int global_quad_port_a; /* global quad port a indication */
 	const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
 	unsigned long mmio_start, mmio_len;
 	int err, pci_using_dac;
 	u16 eeprom_apme_mask = IGB_EEPROM_APME;
-	u32 part_num;
+	u8 part_str[E1000_PBANUM_LENGTH];
 
 	/* Catch broken hardware that put the wrong VF device ID in
 	 * the PCIe SR-IOV capability.
@@ -2000,10 +2003,10 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 		   "unknown"),
 		 netdev->dev_addr);
 
-	igb_read_part_num(hw, &part_num);
-	dev_info(&pdev->dev, "%s: PBA No: %06x-%03x\n", netdev->name,
-		(part_num >> 8), (part_num & 0xff));
-
+	ret_val = igb_read_part_string(hw, part_str, E1000_PBANUM_LENGTH);
+	if (ret_val)
+		strcpy(part_str, "Unknown");
+	dev_info(&pdev->dev, "%s: PBA No: %s\n", netdev->name, part_str);
 	dev_info(&pdev->dev,
 		"Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
 		adapter->msix_entries ? "MSI-X" :
@@ -2049,13 +2052,16 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 
-	/* flush_scheduled work may reschedule our watchdog task, so
-	 * explicitly disable watchdog tasks from being rescheduled  */
+	/*
+	 * The watchdog timer may be rescheduled, so explicitly
+	 * disable watchdog from being rescheduled.
+	 */
 	set_bit(__IGB_DOWN, &adapter->state);
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_info_timer);
 
-	flush_scheduled_work();
+	cancel_work_sync(&adapter->reset_task);
+	cancel_work_sync(&adapter->watchdog_task);
 
 #ifdef CONFIG_IGB_DCA
 	if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
@@ -2436,10 +2442,9 @@ int igb_setup_tx_resources(struct igb_ring *tx_ring)
 	int size;
 
 	size = sizeof(struct igb_buffer) * tx_ring->count;
-	tx_ring->buffer_info = vmalloc(size);
+	tx_ring->buffer_info = vzalloc(size);
 	if (!tx_ring->buffer_info)
 		goto err;
-	memset(tx_ring->buffer_info, 0, size);
 
 	/* round up to nearest 4K */
 	tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
@@ -2587,10 +2592,9 @@ int igb_setup_rx_resources(struct igb_ring *rx_ring)
 	int size, desc_len;
 
 	size = sizeof(struct igb_buffer) * rx_ring->count;
-	rx_ring->buffer_info = vmalloc(size);
+	rx_ring->buffer_info = vzalloc(size);
 	if (!rx_ring->buffer_info)
 		goto err;
-	memset(rx_ring->buffer_info, 0, size);
 
 	desc_len = sizeof(union e1000_adv_rx_desc);
 
@@ -3362,6 +3366,45 @@ static void igb_set_rx_mode(struct net_device *netdev)
 	igb_restore_vf_multicasts(adapter);
 }
 
+static void igb_check_wvbr(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 wvbr = 0;
+
+	switch (hw->mac.type) {
+	case e1000_82576:
+	case e1000_i350:
+		if (!(wvbr = rd32(E1000_WVBR)))
+			return;
+		break;
+	default:
+		break;
+	}
+
+	adapter->wvbr |= wvbr;
+}
+
+#define IGB_STAGGERED_QUEUE_OFFSET 8
+
+static void igb_spoof_check(struct igb_adapter *adapter)
+{
+	int j;
+
+	if (!adapter->wvbr)
+		return;
+
+	for(j = 0; j < adapter->vfs_allocated_count; j++) {
+		if (adapter->wvbr & (1 << j) ||
+		    adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
+			dev_warn(&adapter->pdev->dev,
+				"Spoof event(s) detected on VF %d\n", j);
+			adapter->wvbr &=
+				~((1 << j) |
+				  (1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
+		}
+	}
+}
+
 /* Need to wait a few seconds after link up to get diagnostic information from
  * the phy */
 static void igb_update_phy_info(unsigned long data)
@@ -3521,6 +3564,8 @@ static void igb_watchdog_task(struct work_struct *work)
 		wr32(E1000_ICS, E1000_ICS_RXDMT0);
 	}
 
+	igb_spoof_check(adapter);
+
 	/* Reset the timer */
 	if (!test_bit(__IGB_DOWN, &adapter->state))
 		mod_timer(&adapter->watchdog_timer,
@@ -4517,6 +4562,10 @@ static irqreturn_t igb_msix_other(int irq, void *data)
 	if (icr & E1000_ICR_DOUTSYNC) {
 		/* HW is reporting DMA is out of sync */
 		adapter->stats.doosync++;
+		/* The DMA Out of Sync is also indication of a spoof event
+		 * in IOV mode. Check the Wrong VM Behavior register to
+		 * see if it is really a spoof event. */
+		igb_check_wvbr(adapter);
 	}
 
 	/* Check for a mailbox event */
@@ -4969,8 +5018,8 @@ static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
 
 static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
 {
-	/* clear flags */
-	adapter->vf_data[vf].flags &= ~(IGB_VF_FLAG_PF_SET_MAC);
+	/* clear flags - except flag that indicates PF has set the MAC */
+	adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC;
 	adapter->vf_data[vf].last_nack = jiffies;
 
 	/* reset offloads to defaults */
@@ -5024,7 +5073,7 @@ static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
 	reg = rd32(E1000_VFRE);
 	wr32(E1000_VFRE, reg | (1 << vf));
 
-	adapter->vf_data[vf].flags = IGB_VF_FLAG_CTS;
+	adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
 
 	/* reply to reset with ack and vf mac address */
 	msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
@@ -5103,7 +5152,14 @@ static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
 
 	switch ((msgbuf[0] & 0xFFFF)) {
 	case E1000_VF_SET_MAC_ADDR:
-		retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
+		retval = -EINVAL;
+		if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
+			retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
+		else
+			dev_warn(&pdev->dev,
+				 "VF %d attempted to override administratively "
+				 "set MAC address\nReload the VF driver to "
+				 "resume operations\n", vf);
 		break;
 	case E1000_VF_SET_PROMISC:
 		retval = igb_set_vf_promisc(adapter, msgbuf, vf);
@@ -5115,8 +5171,12 @@ static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
 		retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
 		break;
 	case E1000_VF_SET_VLAN:
-		if (adapter->vf_data[vf].pf_vlan)
-			retval = -1;
+		retval = -1;
+		if (vf_data->pf_vlan)
+			dev_warn(&pdev->dev,
+				 "VF %d attempted to override administratively "
+				 "set VLAN tag\nReload the VF driver to "
+				 "resume operations\n", vf);
 		else
 			retval = igb_set_vf_vlan(adapter, msgbuf, vf);
 		break;
@@ -6580,6 +6640,8 @@ static void igb_vmm_control(struct igb_adapter *adapter)
 	if (adapter->vfs_allocated_count) {
 		igb_vmdq_set_loopback_pf(hw, true);
 		igb_vmdq_set_replication_pf(hw, true);
+		igb_vmdq_set_anti_spoofing_pf(hw, true,
+						adapter->vfs_allocated_count);
 	} else {
 		igb_vmdq_set_loopback_pf(hw, false);
 		igb_vmdq_set_replication_pf(hw, false);
diff --git a/drivers/net/igbvf/Makefile b/drivers/net/igbvf/Makefile
index c2f150d8f2d..0fa3db3dd8b 100644
--- a/drivers/net/igbvf/Makefile
+++ b/drivers/net/igbvf/Makefile
@@ -1,7 +1,7 @@
 ################################################################################
 #
 # Intel(R) 82576 Virtual Function Linux driver
-# Copyright(c) 2009 Intel Corporation.
+# Copyright(c) 2009 - 2010 Intel Corporation.
 #
 # This program is free software; you can redistribute it and/or modify it
 # under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/igbvf/defines.h b/drivers/net/igbvf/defines.h
index 88a47537518..79f2604673f 100644
--- a/drivers/net/igbvf/defines.h
+++ b/drivers/net/igbvf/defines.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) 82576 Virtual Function Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c
index 33add708bcb..ed6e3d91024 100644
--- a/drivers/net/igbvf/ethtool.c
+++ b/drivers/net/igbvf/ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) 82576 Virtual Function Linux driver
-  Copyright(c) 2009 Intel Corporation.
+  Copyright(c) 2009 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -110,11 +110,6 @@ static int igbvf_get_settings(struct net_device *netdev,
 	return 0;
 }
 
-static u32 igbvf_get_link(struct net_device *netdev)
-{
-	return netif_carrier_ok(netdev);
-}
-
 static int igbvf_set_settings(struct net_device *netdev,
                               struct ethtool_cmd *ecmd)
 {
@@ -515,7 +510,7 @@ static const struct ethtool_ops igbvf_ethtool_ops = {
 	.get_msglevel		= igbvf_get_msglevel,
 	.set_msglevel		= igbvf_set_msglevel,
 	.nway_reset		= igbvf_nway_reset,
-	.get_link		= igbvf_get_link,
+	.get_link		= ethtool_op_get_link,
 	.get_eeprom_len		= igbvf_get_eeprom_len,
 	.get_eeprom		= igbvf_get_eeprom,
 	.set_eeprom		= igbvf_set_eeprom,
diff --git a/drivers/net/igbvf/igbvf.h b/drivers/net/igbvf/igbvf.h
index debeee2dc71..990c329e6c3 100644
--- a/drivers/net/igbvf/igbvf.h
+++ b/drivers/net/igbvf/igbvf.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) 82576 Virtual Function Linux driver
-  Copyright(c) 2009 Intel Corporation.
+  Copyright(c) 2009 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -97,6 +97,7 @@ struct igbvf_adapter;
 
 enum igbvf_boards {
 	board_vf,
+	board_i350_vf,
 };
 
 struct igbvf_queue_stats {
@@ -126,7 +127,6 @@ struct igbvf_buffer {
 			unsigned int page_offset;
 		};
 	};
-	struct page *page;
 };
 
 union igbvf_desc {
diff --git a/drivers/net/igbvf/mbx.c b/drivers/net/igbvf/mbx.c
index 819a8ec901d..3d6f4cc3998 100644
--- a/drivers/net/igbvf/mbx.c
+++ b/drivers/net/igbvf/mbx.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) 82576 Virtual Function Linux driver
-  Copyright(c) 2009 Intel Corporation.
+  Copyright(c) 2009 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/igbvf/mbx.h b/drivers/net/igbvf/mbx.h
index 4938609dbfb..c2883c45d47 100644
--- a/drivers/net/igbvf/mbx.h
+++ b/drivers/net/igbvf/mbx.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) 82576 Virtual Function Linux driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 28af019c97b..6352c8158e6 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) 82576 Virtual Function Linux driver
-  Copyright(c) 2009 Intel Corporation.
+  Copyright(c) 2009 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -44,12 +44,13 @@
 
 #include "igbvf.h"
 
-#define DRV_VERSION "1.0.0-k0"
+#define DRV_VERSION "1.0.8-k0"
 char igbvf_driver_name[] = "igbvf";
 const char igbvf_driver_version[] = DRV_VERSION;
 static const char igbvf_driver_string[] =
 				"Intel(R) Virtual Function Network Driver";
-static const char igbvf_copyright[] = "Copyright (c) 2009 Intel Corporation.";
+static const char igbvf_copyright[] =
+				"Copyright (c) 2009 - 2010 Intel Corporation.";
 
 static int igbvf_poll(struct napi_struct *napi, int budget);
 static void igbvf_reset(struct igbvf_adapter *);
@@ -63,8 +64,16 @@ static struct igbvf_info igbvf_vf_info = {
 	.init_ops               = e1000_init_function_pointers_vf,
 };
 
+static struct igbvf_info igbvf_i350_vf_info = {
+	.mac			= e1000_vfadapt_i350,
+	.flags			= 0,
+	.pba			= 10,
+	.init_ops		= e1000_init_function_pointers_vf,
+};
+
 static const struct igbvf_info *igbvf_info_tbl[] = {
 	[board_vf]              = &igbvf_vf_info,
+	[board_i350_vf]		= &igbvf_i350_vf_info,
 };
 
 /**
@@ -429,10 +438,9 @@ int igbvf_setup_tx_resources(struct igbvf_adapter *adapter,
 	int size;
 
 	size = sizeof(struct igbvf_buffer) * tx_ring->count;
-	tx_ring->buffer_info = vmalloc(size);
+	tx_ring->buffer_info = vzalloc(size);
 	if (!tx_ring->buffer_info)
 		goto err;
-	memset(tx_ring->buffer_info, 0, size);
 
 	/* round up to nearest 4K */
 	tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
@@ -469,10 +477,9 @@ int igbvf_setup_rx_resources(struct igbvf_adapter *adapter,
 	int size, desc_len;
 
 	size = sizeof(struct igbvf_buffer) * rx_ring->count;
-	rx_ring->buffer_info = vmalloc(size);
+	rx_ring->buffer_info = vzalloc(size);
 	if (!rx_ring->buffer_info)
 		goto err;
-	memset(rx_ring->buffer_info, 0, size);
 
 	desc_len = sizeof(union e1000_adv_rx_desc);
 
@@ -1851,8 +1858,6 @@ static void igbvf_watchdog_task(struct work_struct *work)
 
 	if (link) {
 		if (!netif_carrier_ok(netdev)) {
-			bool txb2b = 1;
-
 			mac->ops.get_link_up_info(&adapter->hw,
 			                          &adapter->link_speed,
 			                          &adapter->link_duplex);
@@ -1862,11 +1867,9 @@ static void igbvf_watchdog_task(struct work_struct *work)
 			adapter->tx_timeout_factor = 1;
 			switch (adapter->link_speed) {
 			case SPEED_10:
-				txb2b = 0;
 				adapter->tx_timeout_factor = 16;
 				break;
 			case SPEED_100:
-				txb2b = 0;
 				/* maybe add some timeout factor ? */
 				break;
 			}
@@ -2830,13 +2833,14 @@ static void __devexit igbvf_remove(struct pci_dev *pdev)
 	struct e1000_hw *hw = &adapter->hw;
 
 	/*
-	 * flush_scheduled work may reschedule our watchdog task, so
-	 * explicitly disable watchdog tasks from being rescheduled
+	 * The watchdog timer may be rescheduled, so explicitly
+	 * disable it from being rescheduled.
 	 */
 	set_bit(__IGBVF_DOWN, &adapter->state);
 	del_timer_sync(&adapter->watchdog_timer);
 
-	flush_scheduled_work();
+	cancel_work_sync(&adapter->reset_task);
+	cancel_work_sync(&adapter->watchdog_task);
 
 	unregister_netdev(netdev);
 
@@ -2869,6 +2873,7 @@ static struct pci_error_handlers igbvf_err_handler = {
 
 static DEFINE_PCI_DEVICE_TABLE(igbvf_pci_tbl) = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_VF), board_vf },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_VF), board_i350_vf },
 	{ } /* terminate list */
 };
 MODULE_DEVICE_TABLE(pci, igbvf_pci_tbl);
diff --git a/drivers/net/igbvf/regs.h b/drivers/net/igbvf/regs.h
index b9e24ed70d0..77e18d3d6b1 100644
--- a/drivers/net/igbvf/regs.h
+++ b/drivers/net/igbvf/regs.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) 82576 Virtual Function Linux driver
-  Copyright(c) 2009 Intel Corporation.
+  Copyright(c) 2009 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/igbvf/vf.c b/drivers/net/igbvf/vf.c
index a9a61efa964..74486a8b009 100644
--- a/drivers/net/igbvf/vf.c
+++ b/drivers/net/igbvf/vf.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) 82576 Virtual Function Linux driver
-  Copyright(c) 2009 Intel Corporation.
+  Copyright(c) 2009 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -362,8 +362,8 @@ static s32 e1000_check_for_link_vf(struct e1000_hw *hw)
 	 * or a virtual function reset
 	 */
 
-	/* If we were hit with a reset drop the link */
-	if (!mbx->ops.check_for_rst(hw))
+	/* If we were hit with a reset or timeout drop the link */
+	if (!mbx->ops.check_for_rst(hw) || !mbx->timeout)
 		mac->get_link_status = true;
 
 	if (!mac->get_link_status)
diff --git a/drivers/net/igbvf/vf.h b/drivers/net/igbvf/vf.h
index 1e8ce3741a6..d7ed58fcd9b 100644
--- a/drivers/net/igbvf/vf.h
+++ b/drivers/net/igbvf/vf.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel(R) 82576 Virtual Function Linux driver
-  Copyright(c) 2009 Intel Corporation.
+  Copyright(c) 2009 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -39,6 +39,7 @@
 struct e1000_hw;
 
 #define E1000_DEV_ID_82576_VF                 0x10CA
+#define E1000_DEV_ID_I350_VF                  0x1520
 #define E1000_REVISION_0 0
 #define E1000_REVISION_1 1
 #define E1000_REVISION_2 2
@@ -133,6 +134,7 @@ struct e1000_adv_tx_context_desc {
 enum e1000_mac_type {
 	e1000_undefined = 0,
 	e1000_vfadapt,
+	e1000_vfadapt_i350,
 	e1000_num_macs  /* List is 1-based, so subtract 1 for true count. */
 };
 
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index dc019809234..aa93655c3aa 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -88,16 +88,14 @@ static const char *ipg_brand_name[] = {
 	"IC PLUS IP1000 1000/100/10 based NIC",
 	"Sundance Technology ST2021 based NIC",
 	"Tamarack Microelectronics TC9020/9021 based NIC",
-	"Tamarack Microelectronics TC9020/9021 based NIC",
 	"D-Link NIC IP1000A"
 };
 
 static DEFINE_PCI_DEVICE_TABLE(ipg_pci_tbl) = {
 	{ PCI_VDEVICE(SUNDANCE,	0x1023), 0 },
 	{ PCI_VDEVICE(SUNDANCE,	0x2021), 1 },
-	{ PCI_VDEVICE(SUNDANCE,	0x1021), 2 },
-	{ PCI_VDEVICE(DLINK,	0x9021), 3 },
-	{ PCI_VDEVICE(DLINK,	0x4020), 4 },
+	{ PCI_VDEVICE(DLINK,	0x9021), 2 },
+	{ PCI_VDEVICE(DLINK,	0x4020), 3 },
 	{ 0, }
 };
 
diff --git a/drivers/net/irda/act200l-sir.c b/drivers/net/irda/act200l-sir.c
index 37ab8c85571..8ff084f1d23 100644
--- a/drivers/net/irda/act200l-sir.c
+++ b/drivers/net/irda/act200l-sir.c
@@ -199,7 +199,7 @@ static int act200l_reset(struct sir_dev *dev)
 {
 	unsigned state = dev->fsm.substate;
 	unsigned delay = 0;
-	u8 control[9] = {
+	static const u8 control[9] = {
 		ACT200L_REG15,
 		ACT200L_REG13 | ACT200L_SHDW,
 		ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index b626cccbccd..f81d944fc36 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -818,9 +818,9 @@ toshoboe_probe (struct toshoboe_cb *self)
 {
   int i, j, n;
 #ifdef USE_MIR
-  int bauds[] = { 9600, 115200, 4000000, 1152000 };
+  static const int bauds[] = { 9600, 115200, 4000000, 1152000 };
 #else
-  int bauds[] = { 9600, 115200, 4000000 };
+  static const int bauds[] = { 9600, 115200, 4000000 };
 #endif
   unsigned long flags;
 
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index 74b20f179ce..cc821de2c96 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -959,7 +959,7 @@ static void mcs_disconnect(struct usb_interface *intf)
 	if (!mcs)
 		return;
 
-	flush_scheduled_work();
+	cancel_work_sync(&mcs->work);
 
 	unregister_netdev(mcs->netdev);
 	free_netdev(mcs->netdev);
diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c
index 00b38bccd6d..52a7c86af66 100644
--- a/drivers/net/irda/sh_sir.c
+++ b/drivers/net/irda/sh_sir.c
@@ -258,7 +258,7 @@ static int sh_sir_set_baudrate(struct sh_sir_self *self, u32 baudrate)
 
 	/* Baud Rate Error Correction x 10000 */
 	u32 rate_err_array[] = {
-		0000, 0625, 1250, 1875,
+		   0,  625, 1250, 1875,
 		2500, 3125, 3750, 4375,
 		5000, 5625, 6250, 6875,
 		7500, 8125, 8750, 9375,
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 8c57bfb5f09..1c1677cfea2 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -376,7 +376,7 @@ MODULE_DEVICE_TABLE(pnp, smsc_ircc_pnp_table);
 static int pnp_driver_registered;
 
 #ifdef CONFIG_PNP
-static int __init smsc_ircc_pnp_probe(struct pnp_dev *dev,
+static int __devinit smsc_ircc_pnp_probe(struct pnp_dev *dev,
 				      const struct pnp_device_id *dev_id)
 {
 	unsigned int firbase, sirbase;
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 8df645e78f2..9ece1fd9889 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -885,17 +885,8 @@ static void veth_stop_connection(struct veth_lpar_connection *cnx)
 	veth_kick_statemachine(cnx);
 	spin_unlock_irq(&cnx->lock);
 
-	/* There's a slim chance the reset code has just queued the
-	 * statemachine to run in five seconds. If so we need to cancel
-	 * that and requeue the work to run now. */
-	if (cancel_delayed_work(&cnx->statemachine_wq)) {
-		spin_lock_irq(&cnx->lock);
-		veth_kick_statemachine(cnx);
-		spin_unlock_irq(&cnx->lock);
-	}
-
-	/* Wait for the state machine to run. */
-	flush_scheduled_work();
+	/* ensure the statemachine runs now and waits for its completion */
+	flush_delayed_work_sync(&cnx->statemachine_wq);
 }
 
 static void veth_destroy_connection(struct veth_lpar_connection *cnx)
@@ -1009,15 +1000,10 @@ static int veth_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	return 0;
 }
 
-static u32 veth_get_link(struct net_device *dev)
-{
-	return 1;
-}
-
 static const struct ethtool_ops ops = {
 	.get_drvinfo = veth_get_drvinfo,
 	.get_settings = veth_get_settings,
-	.get_link = veth_get_link,
+	.get_link = ethtool_op_get_link,
 };
 
 static const struct net_device_ops veth_netdev_ops = {
@@ -1605,7 +1591,7 @@ static int veth_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 	}
 	veth_dev[i] = dev;
 
-	port = (struct veth_port*)netdev_priv(dev);
+	port = netdev_priv(dev);
 
 	/* Start the state machine on each connection on this vlan. If we're
 	 * the first dev to do so this will commence link negotiation */
@@ -1658,15 +1644,14 @@ static void __exit veth_module_cleanup(void)
 	/* Disconnect our "irq" to stop events coming from the Hypervisor. */
 	HvLpEvent_unregisterHandler(HvLpEvent_Type_VirtualLan);
 
-	/* Make sure any work queued from Hypervisor callbacks is finished. */
-	flush_scheduled_work();
-
 	for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) {
 		cnx = veth_cnx[i];
 
 		if (!cnx)
 			continue;
 
+		/* Cancel work queued from Hypervisor callbacks */
+		cancel_delayed_work_sync(&cnx->statemachine_wq);
 		/* Remove the connection from sysfs */
 		kobject_del(&cnx->kobject);
 		/* Drop the driver's reference to the connection */
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index caa8192fff2..5639cccb493 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -98,6 +98,8 @@ static void ixgb_alloc_rx_buffers(struct ixgb_adapter *, int);
 static void ixgb_tx_timeout(struct net_device *dev);
 static void ixgb_tx_timeout_task(struct work_struct *work);
 
+static void ixgb_vlan_strip_enable(struct ixgb_adapter *adapter);
+static void ixgb_vlan_strip_disable(struct ixgb_adapter *adapter);
 static void ixgb_vlan_rx_register(struct net_device *netdev,
                                   struct vlan_group *grp);
 static void ixgb_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
@@ -525,7 +527,7 @@ ixgb_remove(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
-	flush_scheduled_work();
+	cancel_work_sync(&adapter->tx_timeout_task);
 
 	unregister_netdev(netdev);
 
@@ -669,13 +671,12 @@ ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
 	int size;
 
 	size = sizeof(struct ixgb_buffer) * txdr->count;
-	txdr->buffer_info = vmalloc(size);
+	txdr->buffer_info = vzalloc(size);
 	if (!txdr->buffer_info) {
 		netif_err(adapter, probe, adapter->netdev,
 			  "Unable to allocate transmit descriptor ring memory\n");
 		return -ENOMEM;
 	}
-	memset(txdr->buffer_info, 0, size);
 
 	/* round up to nearest 4K */
 
@@ -759,13 +760,12 @@ ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
 	int size;
 
 	size = sizeof(struct ixgb_buffer) * rxdr->count;
-	rxdr->buffer_info = vmalloc(size);
+	rxdr->buffer_info = vzalloc(size);
 	if (!rxdr->buffer_info) {
 		netif_err(adapter, probe, adapter->netdev,
 			  "Unable to allocate receive descriptor ring\n");
 		return -ENOMEM;
 	}
-	memset(rxdr->buffer_info, 0, size);
 
 	/* Round up to nearest 4K */
 
@@ -1078,6 +1078,8 @@ ixgb_set_multi(struct net_device *netdev)
 
 	if (netdev->flags & IFF_PROMISC) {
 		rctl |= (IXGB_RCTL_UPE | IXGB_RCTL_MPE);
+		/* disable VLAN filtering */
+		rctl &= ~IXGB_RCTL_CFIEN;
 		rctl &= ~IXGB_RCTL_VFE;
 	} else {
 		if (netdev->flags & IFF_ALLMULTI) {
@@ -1086,7 +1088,9 @@ ixgb_set_multi(struct net_device *netdev)
 		} else {
 			rctl &= ~(IXGB_RCTL_UPE | IXGB_RCTL_MPE);
 		}
+		/* enable VLAN filtering */
 		rctl |= IXGB_RCTL_VFE;
+		rctl &= ~IXGB_RCTL_CFIEN;
 	}
 
 	if (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES) {
@@ -1105,6 +1109,12 @@ ixgb_set_multi(struct net_device *netdev)
 
 		ixgb_mc_addr_list_update(hw, mta, netdev_mc_count(netdev), 0);
 	}
+
+	if (netdev->features & NETIF_F_HW_VLAN_RX)
+		ixgb_vlan_strip_enable(adapter);
+	else
+		ixgb_vlan_strip_disable(adapter);
+
 }
 
 /**
@@ -1252,7 +1262,7 @@ ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb)
 
 	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
 		struct ixgb_buffer *buffer_info;
-		css = skb_transport_offset(skb);
+		css = skb_checksum_start_offset(skb);
 		cso = css + skb->csum_offset;
 
 		i = adapter->tx_ring.next_to_use;
@@ -2152,33 +2162,30 @@ static void
 ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 {
 	struct ixgb_adapter *adapter = netdev_priv(netdev);
-	u32 ctrl, rctl;
 
-	ixgb_irq_disable(adapter);
 	adapter->vlgrp = grp;
+}
 
-	if (grp) {
-		/* enable VLAN tag insert/strip */
-		ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
-		ctrl |= IXGB_CTRL0_VME;
-		IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
-
-		/* enable VLAN receive filtering */
+static void
+ixgb_vlan_strip_enable(struct ixgb_adapter *adapter)
+{
+	u32 ctrl;
 
-		rctl = IXGB_READ_REG(&adapter->hw, RCTL);
-		rctl &= ~IXGB_RCTL_CFIEN;
-		IXGB_WRITE_REG(&adapter->hw, RCTL, rctl);
-	} else {
-		/* disable VLAN tag insert/strip */
+	/* enable VLAN tag insert/strip */
+	ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
+	ctrl |= IXGB_CTRL0_VME;
+	IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
+}
 
-		ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
-		ctrl &= ~IXGB_CTRL0_VME;
-		IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
-	}
+static void
+ixgb_vlan_strip_disable(struct ixgb_adapter *adapter)
+{
+	u32 ctrl;
 
-	/* don't enable interrupts unless we are UP */
-	if (adapter->netdev->flags & IFF_UP)
-		ixgb_irq_enable(adapter);
+	/* disable VLAN tag insert/strip */
+	ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
+	ctrl &= ~IXGB_CTRL0_VME;
+	IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
 }
 
 static void
diff --git a/drivers/net/ixgb/ixgb_param.c b/drivers/net/ixgb/ixgb_param.c
index 88a08f05624..dd7fbeb1f7d 100644
--- a/drivers/net/ixgb/ixgb_param.c
+++ b/drivers/net/ixgb/ixgb_param.c
@@ -191,9 +191,9 @@ struct ixgb_option {
 		} r;
 		struct {	/* list_option info */
 			int nr;
-			struct ixgb_opt_list {
+			const struct ixgb_opt_list {
 				int i;
-				char *str;
+				const char *str;
 			} *p;
 		} l;
 	} arg;
@@ -226,7 +226,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
 		break;
 	case list_option: {
 		int i;
-		struct ixgb_opt_list *ent;
+		const struct ixgb_opt_list *ent;
 
 		for (i = 0; i < opt->arg.l.nr; i++) {
 			ent = &opt->arg.l.p[i];
@@ -322,14 +322,15 @@ ixgb_check_options(struct ixgb_adapter *adapter)
 	}
 	{ /* Flow Control */
 
-		struct ixgb_opt_list fc_list[] =
-			{{ ixgb_fc_none,	"Flow Control Disabled" },
-			 { ixgb_fc_rx_pause,"Flow Control Receive Only" },
-			 { ixgb_fc_tx_pause,"Flow Control Transmit Only" },
-			 { ixgb_fc_full,	"Flow Control Enabled" },
-			 { ixgb_fc_default, "Flow Control Hardware Default" }};
+		static const struct ixgb_opt_list fc_list[] = {
+		       { ixgb_fc_none, "Flow Control Disabled" },
+		       { ixgb_fc_rx_pause, "Flow Control Receive Only" },
+		       { ixgb_fc_tx_pause, "Flow Control Transmit Only" },
+		       { ixgb_fc_full, "Flow Control Enabled" },
+		       { ixgb_fc_default, "Flow Control Hardware Default" }
+		};
 
-		const struct ixgb_option opt = {
+		static const struct ixgb_option opt = {
 			.type = list_option,
 			.name = "Flow Control",
 			.err  = "reading default settings from EEPROM",
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile
index 8f81efb4916..7d7387fbdec 100644
--- a/drivers/net/ixgbe/Makefile
+++ b/drivers/net/ixgbe/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o
 
 ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
               ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \
-              ixgbe_mbx.o
+              ixgbe_mbx.o ixgbe_x540.o
 
 ixgbe-$(CONFIG_IXGBE_DCB) +=  ixgbe_dcb.o ixgbe_dcb_82598.o \
                               ixgbe_dcb_82599.o ixgbe_dcb_nl.o
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index ed8703cfffb..3ae30b8cb7d 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -61,10 +61,8 @@
 #define IXGBE_MIN_RXD			     64
 
 /* flow control */
-#define IXGBE_DEFAULT_FCRTL		0x10000
 #define IXGBE_MIN_FCRTL			   0x40
 #define IXGBE_MAX_FCRTL			0x7FF80
-#define IXGBE_DEFAULT_FCRTH		0x20000
 #define IXGBE_MIN_FCRTH			  0x600
 #define IXGBE_MAX_FCRTH			0x7FFF0
 #define IXGBE_DEFAULT_FCPAUSE		 0xFFFF
@@ -130,7 +128,9 @@ struct ixgbe_tx_buffer {
 	unsigned long time_stamp;
 	u16 length;
 	u16 next_to_watch;
-	u16 mapped_as_page;
+	unsigned int bytecount;
+	u16 gso_segs;
+	u8 mapped_as_page;
 };
 
 struct ixgbe_rx_buffer {
@@ -146,12 +146,56 @@ struct ixgbe_queue_stats {
 	u64 bytes;
 };
 
+struct ixgbe_tx_queue_stats {
+	u64 restart_queue;
+	u64 tx_busy;
+	u64 completed;
+	u64 tx_done_old;
+};
+
+struct ixgbe_rx_queue_stats {
+	u64 rsc_count;
+	u64 rsc_flush;
+	u64 non_eop_descs;
+	u64 alloc_rx_page_failed;
+	u64 alloc_rx_buff_failed;
+};
+
+enum ixbge_ring_state_t {
+	__IXGBE_TX_FDIR_INIT_DONE,
+	__IXGBE_TX_DETECT_HANG,
+	__IXGBE_HANG_CHECK_ARMED,
+	__IXGBE_RX_PS_ENABLED,
+	__IXGBE_RX_RSC_ENABLED,
+};
+
+#define ring_is_ps_enabled(ring) \
+	test_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state)
+#define set_ring_ps_enabled(ring) \
+	set_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state)
+#define clear_ring_ps_enabled(ring) \
+	clear_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state)
+#define check_for_tx_hang(ring) \
+	test_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
+#define set_check_for_tx_hang(ring) \
+	set_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
+#define clear_check_for_tx_hang(ring) \
+	clear_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
+#define ring_is_rsc_enabled(ring) \
+	test_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
+#define set_ring_rsc_enabled(ring) \
+	set_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
+#define clear_ring_rsc_enabled(ring) \
+	clear_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
 struct ixgbe_ring {
 	void *desc;			/* descriptor ring memory */
+	struct device *dev;             /* device for DMA mapping */
+	struct net_device *netdev;      /* netdev ring belongs to */
 	union {
 		struct ixgbe_tx_buffer *tx_buffer_info;
 		struct ixgbe_rx_buffer *rx_buffer_info;
 	};
+	unsigned long state;
 	u8 atr_sample_rate;
 	u8 atr_count;
 	u16 count;			/* amount of descriptors */
@@ -160,38 +204,30 @@ struct ixgbe_ring {
 	u16 next_to_clean;
 
 	u8 queue_index; /* needed for multiqueue queue management */
-
-#define IXGBE_RING_RX_PS_ENABLED                (u8)(1)
-	u8 flags;			/* per ring feature flags */
-	u16 head;
-	u16 tail;
-
-	unsigned int total_bytes;
-	unsigned int total_packets;
-
-#ifdef CONFIG_IXGBE_DCA
-	/* cpu for tx queue */
-	int cpu;
-#endif
-
-	u16 work_limit;			/* max work per interrupt */
-	u16 reg_idx;			/* holds the special value that gets
+	u8 reg_idx;			/* holds the special value that gets
 					 * the hardware register offset
 					 * associated with this ring, which is
 					 * different for DCB and RSS modes
 					 */
 
+	u16 work_limit;			/* max work per interrupt */
+
+	u8 __iomem *tail;
+
+	unsigned int total_bytes;
+	unsigned int total_packets;
+
 	struct ixgbe_queue_stats stats;
 	struct u64_stats_sync syncp;
+	union {
+		struct ixgbe_tx_queue_stats tx_stats;
+		struct ixgbe_rx_queue_stats rx_stats;
+	};
 	int numa_node;
-	unsigned long reinit_state;
-	u64 rsc_count;			/* stat for coalesced packets */
-	u64 rsc_flush;			/* stats for flushed packets */
-	u32 restart_queue;		/* track tx queue restarts */
-	u32 non_eop_descs;		/* track hardware descriptor chaining */
-
 	unsigned int size;		/* length in bytes */
 	dma_addr_t dma;			/* phys. address of descriptor ring */
+	struct rcu_head rcu;
+	struct ixgbe_q_vector *q_vector; /* back-pointer to host q_vector */
 } ____cacheline_internodealigned_in_smp;
 
 enum ixgbe_ring_f_enum {
@@ -237,6 +273,9 @@ struct ixgbe_q_vector {
 	unsigned int v_idx; /* index of q_vector within array, also used for
 	                     * finding the bit in EICR and friends that
 	                     * represents the vector for this ring */
+#ifdef CONFIG_IXGBE_DCA
+	int cpu;	    /* CPU for DCA */
+#endif
 	struct napi_struct napi;
 	DECLARE_BITMAP(rxr_idx, MAX_RX_QUEUES); /* Rx ring indices */
 	DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */
@@ -246,6 +285,7 @@ struct ixgbe_q_vector {
 	u8 rx_itr;
 	u32 eitr;
 	cpumask_var_t affinity_mask;
+	char name[IFNAMSIZ + 9];
 };
 
 /* Helper macros to switch between ints/sec and what the register uses.
@@ -294,7 +334,6 @@ struct ixgbe_adapter {
 	u16 bd_number;
 	struct work_struct reset_task;
 	struct ixgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
-	char name[MAX_MSIX_COUNT][IFNAMSIZ + 9];
 	struct ixgbe_dcb_config dcb_cfg;
 	struct ixgbe_dcb_config temp_dcb_cfg;
 	u8 dcb_set_bitmap;
@@ -417,6 +456,7 @@ struct ixgbe_adapter {
 	int node;
 	struct work_struct check_overtemp_task;
 	u32 interrupt_event;
+	char lsc_int_name[IFNAMSIZ + 9];
 
 	/* SR-IOV */
 	DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS);
@@ -428,17 +468,25 @@ enum ixbge_state_t {
 	__IXGBE_TESTING,
 	__IXGBE_RESETTING,
 	__IXGBE_DOWN,
-	__IXGBE_FDIR_INIT_DONE,
 	__IXGBE_SFP_MODULE_NOT_FOUND
 };
 
+struct ixgbe_rsc_cb {
+	dma_addr_t dma;
+	u16 skb_cnt;
+	bool delay_unmap;
+};
+#define IXGBE_RSC_CB(skb) ((struct ixgbe_rsc_cb *)(skb)->cb)
+
 enum ixgbe_boards {
 	board_82598,
 	board_82599,
+	board_X540,
 };
 
 extern struct ixgbe_info ixgbe_82598_info;
 extern struct ixgbe_info ixgbe_82599_info;
+extern struct ixgbe_info ixgbe_X540_info;
 #ifdef CONFIG_IXGBE_DCB
 extern const struct dcbnl_rtnl_ops dcbnl_ops;
 extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,
@@ -454,26 +502,24 @@ extern void ixgbe_down(struct ixgbe_adapter *adapter);
 extern void ixgbe_reinit_locked(struct ixgbe_adapter *adapter);
 extern void ixgbe_reset(struct ixgbe_adapter *adapter);
 extern void ixgbe_set_ethtool_ops(struct net_device *netdev);
-extern int ixgbe_setup_rx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
-extern int ixgbe_setup_tx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
-extern void ixgbe_free_rx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
-extern void ixgbe_free_tx_resources(struct ixgbe_adapter *, struct ixgbe_ring *);
+extern int ixgbe_setup_rx_resources(struct ixgbe_ring *);
+extern int ixgbe_setup_tx_resources(struct ixgbe_ring *);
+extern void ixgbe_free_rx_resources(struct ixgbe_ring *);
+extern void ixgbe_free_tx_resources(struct ixgbe_ring *);
 extern void ixgbe_configure_rx_ring(struct ixgbe_adapter *,struct ixgbe_ring *);
 extern void ixgbe_configure_tx_ring(struct ixgbe_adapter *,struct ixgbe_ring *);
 extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
 extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
 extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
 extern netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *,
-					 struct net_device *,
 					 struct ixgbe_adapter *,
 					 struct ixgbe_ring *);
-extern void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *,
+extern void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *,
                                              struct ixgbe_tx_buffer *);
-extern void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
-                                   struct ixgbe_ring *rx_ring,
-                                   int cleaned_count);
+extern void ixgbe_alloc_rx_buffers(struct ixgbe_ring *, u16);
 extern void ixgbe_write_eitr(struct ixgbe_q_vector *);
 extern int ethtool_ioctl(struct ifreq *ifr);
+extern u8 ixgbe_dcb_txq_to_tc(struct ixgbe_adapter *adapter, u8 index);
 extern s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
 extern s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc);
 extern s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc);
@@ -498,6 +544,10 @@ extern s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input,
                                          u16 flex_byte);
 extern s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input,
                                       u8 l4type);
+extern void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
+                                   struct ixgbe_ring *ring);
+extern void ixgbe_clear_rscctl(struct ixgbe_adapter *adapter,
+                               struct ixgbe_ring *ring);
 extern void ixgbe_set_rx_mode(struct net_device *netdev);
 #ifdef IXGBE_FCOE
 extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter);
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 9c02d6014cc..d0f1d9d2c41 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -38,9 +38,6 @@
 #define IXGBE_82598_MC_TBL_SIZE  128
 #define IXGBE_82598_VFT_TBL_SIZE 128
 
-static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
-                                             ixgbe_link_speed *speed,
-                                             bool *autoneg);
 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
                                          ixgbe_link_speed speed,
                                          bool autoneg,
@@ -156,7 +153,7 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
 	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
 		mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
 		mac->ops.get_link_capabilities =
-		                  &ixgbe_get_copper_link_capabilities_82598;
+			&ixgbe_get_copper_link_capabilities_generic;
 	}
 
 	switch (hw->phy.type) {
@@ -274,37 +271,6 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
 }
 
 /**
- *  ixgbe_get_copper_link_capabilities_82598 - Determines link capabilities
- *  @hw: pointer to hardware structure
- *  @speed: pointer to link speed
- *  @autoneg: boolean auto-negotiation value
- *
- *  Determines the link capabilities by reading the AUTOC register.
- **/
-static s32 ixgbe_get_copper_link_capabilities_82598(struct ixgbe_hw *hw,
-						    ixgbe_link_speed *speed,
-						    bool *autoneg)
-{
-	s32 status = IXGBE_ERR_LINK_SETUP;
-	u16 speed_ability;
-
-	*speed = 0;
-	*autoneg = true;
-
-	status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
-	                              &speed_ability);
-
-	if (status == 0) {
-		if (speed_ability & MDIO_SPEED_10G)
-		    *speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (speed_ability & MDIO_PMA_SPEED_1000)
-		    *speed |= IXGBE_LINK_SPEED_1GB_FULL;
-	}
-
-	return status;
-}
-
-/**
  *  ixgbe_get_media_type_82598 - Determines media type
  *  @hw: pointer to hardware structure
  *
@@ -357,6 +323,7 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 	u32 fctrl_reg;
 	u32 rmcs_reg;
 	u32 reg;
+	u32 rx_pba_size;
 	u32 link_speed = 0;
 	bool link_up;
 
@@ -459,16 +426,18 @@ static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
 
 	/* Set up and enable Rx high/low water mark thresholds, enable XON. */
 	if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
-		if (hw->fc.send_xon) {
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
-			                (hw->fc.low_water | IXGBE_FCRTL_XONE));
-		} else {
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
-			                hw->fc.low_water);
-		}
+		rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
+		rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
+
+		reg = (rx_pba_size - hw->fc.low_water) << 6;
+		if (hw->fc.send_xon)
+			reg |= IXGBE_FCRTL_XONE;
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), reg);
+
+		reg = (rx_pba_size - hw->fc.high_water) << 10;
+		reg |= IXGBE_FCRTH_FCEN;
 
-		IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num),
-		                (hw->fc.high_water | IXGBE_FCRTH_FCEN));
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), reg);
 	}
 
 	/* Configure pause time (2 TCs per register) */
@@ -1222,6 +1191,7 @@ static struct ixgbe_mac_operations mac_ops_82598 = {
 static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
 	.init_params		= &ixgbe_init_eeprom_params_generic,
 	.read			= &ixgbe_read_eerd_generic,
+	.calc_checksum          = &ixgbe_calc_eeprom_checksum_generic,
 	.validate_checksum	= &ixgbe_validate_eeprom_checksum_generic,
 	.update_checksum	= &ixgbe_update_eeprom_checksum_generic,
 };
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 0bd8fbb5bfd..bfd3c227cd4 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -56,9 +56,6 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
                                ixgbe_link_speed speed,
                                bool autoneg,
                                bool autoneg_wait_to_complete);
-static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw,
-                                             ixgbe_link_speed *speed,
-                                             bool *autoneg);
 static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
                                          ixgbe_link_speed speed,
                                          bool autoneg,
@@ -68,9 +65,9 @@ static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
 static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mac_info *mac = &hw->mac;
-	if (hw->phy.multispeed_fiber) {
-		/* Set up dual speed SFP+ support */
-		mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+
+	/* enable the laser control functions for SFP+ fiber */
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) {
 		mac->ops.disable_tx_laser =
 		                       &ixgbe_disable_tx_laser_multispeed_fiber;
 		mac->ops.enable_tx_laser =
@@ -80,6 +77,12 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
 		mac->ops.disable_tx_laser = NULL;
 		mac->ops.enable_tx_laser = NULL;
 		mac->ops.flap_tx_laser = NULL;
+	}
+
+	if (hw->phy.multispeed_fiber) {
+		/* Set up dual speed SFP+ support */
+		mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+	} else {
 		if ((mac->ops.get_media_type(hw) ==
 		     ixgbe_media_type_backplane) &&
 		    (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
@@ -93,6 +96,8 @@ static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
 static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 {
 	s32 ret_val = 0;
+	u32 reg_anlp1 = 0;
+	u32 i = 0;
 	u16 list_offset, data_offset, data_value;
 
 	if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
@@ -119,14 +124,34 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 			IXGBE_WRITE_FLUSH(hw);
 			hw->eeprom.ops.read(hw, ++data_offset, &data_value);
 		}
-		/* Now restart DSP by setting Restart_AN */
-		IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
-		    (IXGBE_READ_REG(hw, IXGBE_AUTOC) | IXGBE_AUTOC_AN_RESTART));
 
 		/* Release the semaphore */
 		ixgbe_release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
 		/* Delay obtaining semaphore again to allow FW access */
 		msleep(hw->eeprom.semaphore_delay);
+
+		/* Now restart DSP by setting Restart_AN and clearing LMS */
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
+		                IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) |
+		                IXGBE_AUTOC_AN_RESTART));
+
+		/* Wait for AN to leave state 0 */
+		for (i = 0; i < 10; i++) {
+			msleep(4);
+			reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+			if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)
+				break;
+		}
+		if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) {
+			hw_dbg(hw, "sfp module setup not complete\n");
+			ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
+			goto setup_sfp_out;
+		}
+
+		/* Restart DSP by setting Restart_AN and return to SFI mode */
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw,
+		                IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL |
+		                IXGBE_AUTOC_AN_RESTART));
 	}
 
 setup_sfp_out:
@@ -174,7 +199,7 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
 	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
 		mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
 		mac->ops.get_link_capabilities =
-		                  &ixgbe_get_copper_link_capabilities_82599;
+			&ixgbe_get_copper_link_capabilities_generic;
 	}
 
 	/* Set necessary function pointers based on phy type */
@@ -184,6 +209,10 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
 		phy->ops.get_firmware_version =
 		             &ixgbe_get_phy_firmware_version_tnx;
 		break;
+	case ixgbe_phy_aq:
+		phy->ops.get_firmware_version =
+			&ixgbe_get_phy_firmware_version_generic;
+		break;
 	default:
 		break;
 	}
@@ -290,37 +319,6 @@ out:
 }
 
 /**
- *  ixgbe_get_copper_link_capabilities_82599 - Determines link capabilities
- *  @hw: pointer to hardware structure
- *  @speed: pointer to link speed
- *  @autoneg: boolean auto-negotiation value
- *
- *  Determines the link capabilities by reading the AUTOC register.
- **/
-static s32 ixgbe_get_copper_link_capabilities_82599(struct ixgbe_hw *hw,
-                                                    ixgbe_link_speed *speed,
-                                                    bool *autoneg)
-{
-	s32 status = IXGBE_ERR_LINK_SETUP;
-	u16 speed_ability;
-
-	*speed = 0;
-	*autoneg = true;
-
-	status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
-	                              &speed_ability);
-
-	if (status == 0) {
-		if (speed_ability & MDIO_SPEED_10G)
-		    *speed |= IXGBE_LINK_SPEED_10GB_FULL;
-		if (speed_ability & MDIO_PMA_SPEED_1000)
-		    *speed |= IXGBE_LINK_SPEED_1GB_FULL;
-	}
-
-	return status;
-}
-
-/**
  *  ixgbe_get_media_type_82599 - Get media type
  *  @hw: pointer to hardware structure
  *
@@ -332,7 +330,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 
 	/* Detect if there is a copper PHY attached. */
 	if (hw->phy.type == ixgbe_phy_cu_unknown ||
-	    hw->phy.type == ixgbe_phy_tn) {
+	    hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_aq) {
 		media_type = ixgbe_media_type_copper;
 		goto out;
 	}
@@ -342,11 +341,13 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82599_KX4_MEZZ:
 	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
 	case IXGBE_DEV_ID_82599_KR:
+	case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
 	case IXGBE_DEV_ID_82599_XAUI_LOM:
 		/* Default device ID is mezzanine card KX/KX4 */
 		media_type = ixgbe_media_type_backplane;
 		break;
 	case IXGBE_DEV_ID_82599_SFP:
+	case IXGBE_DEV_ID_82599_SFP_FCOE:
 	case IXGBE_DEV_ID_82599_SFP_EM:
 		media_type = ixgbe_media_type_fiber;
 		break;
@@ -1924,6 +1925,7 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
 	hw->phy.ops.identify(hw);
 
 	if (hw->phy.type == ixgbe_phy_tn ||
+	    hw->phy.type == ixgbe_phy_aq ||
 	    hw->phy.type == ixgbe_phy_cu_unknown) {
 		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
 				     &ext_ability);
@@ -2125,51 +2127,6 @@ fw_version_out:
 	return status;
 }
 
-/**
- *  ixgbe_get_wwn_prefix_82599 - Get alternative WWNN/WWPN prefix from
- *  the EEPROM
- *  @hw: pointer to hardware structure
- *  @wwnn_prefix: the alternative WWNN prefix
- *  @wwpn_prefix: the alternative WWPN prefix
- *
- *  This function will read the EEPROM from the alternative SAN MAC address
- *  block to check the support for the alternative WWNN/WWPN prefix support.
- **/
-static s32 ixgbe_get_wwn_prefix_82599(struct ixgbe_hw *hw, u16 *wwnn_prefix,
-                                      u16 *wwpn_prefix)
-{
-	u16 offset, caps;
-	u16 alt_san_mac_blk_offset;
-
-	/* clear output first */
-	*wwnn_prefix = 0xFFFF;
-	*wwpn_prefix = 0xFFFF;
-
-	/* check if alternative SAN MAC is supported */
-	hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR,
-	                    &alt_san_mac_blk_offset);
-
-	if ((alt_san_mac_blk_offset == 0) ||
-	    (alt_san_mac_blk_offset == 0xFFFF))
-		goto wwn_prefix_out;
-
-	/* check capability in alternative san mac address block */
-	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
-	hw->eeprom.ops.read(hw, offset, &caps);
-	if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
-		goto wwn_prefix_out;
-
-	/* get the corresponding prefix for WWNN/WWPN */
-	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
-	hw->eeprom.ops.read(hw, offset, wwnn_prefix);
-
-	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
-	hw->eeprom.ops.read(hw, offset, wwpn_prefix);
-
-wwn_prefix_out:
-	return 0;
-}
-
 static struct ixgbe_mac_operations mac_ops_82599 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_82599,
@@ -2181,7 +2138,7 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
 	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
 	.get_device_caps        = &ixgbe_get_device_caps_82599,
-	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_82599,
+	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_generic,
 	.stop_adapter           = &ixgbe_stop_adapter_generic,
 	.get_bus_info           = &ixgbe_get_bus_info_generic,
 	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
@@ -2208,12 +2165,15 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
 	.fc_enable              = &ixgbe_fc_enable_generic,
 	.init_uta_tables        = &ixgbe_init_uta_tables_generic,
 	.setup_sfp              = &ixgbe_setup_sfp_modules_82599,
+	.set_mac_anti_spoofing  = &ixgbe_set_mac_anti_spoofing,
+	.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
 };
 
 static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
 	.init_params            = &ixgbe_init_eeprom_params_generic,
 	.read                   = &ixgbe_read_eerd_generic,
 	.write                  = &ixgbe_write_eeprom_generic,
+	.calc_checksum          = &ixgbe_calc_eeprom_checksum_generic,
 	.validate_checksum      = &ixgbe_validate_eeprom_checksum_generic,
 	.update_checksum        = &ixgbe_update_eeprom_checksum_generic,
 };
@@ -2240,5 +2200,5 @@ struct ixgbe_info ixgbe_82599_info = {
 	.mac_ops                = &mac_ops_82599,
 	.eeprom_ops             = &eeprom_ops_82599,
 	.phy_ops                = &phy_ops_82599,
-	.mbx_ops                = &mbx_ops_82599,
+	.mbx_ops                = &mbx_ops_generic,
 };
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index e3eca131638..d5ede2df3e4 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -45,14 +45,12 @@ static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
 static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
 static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
 static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
-static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw);
 
 static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index);
 static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
 static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
 static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
 static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
-static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
 
 /**
  *  ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
@@ -198,30 +196,110 @@ s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_read_pba_num_generic - Reads part number from EEPROM
+ *  ixgbe_read_pba_string_generic - Reads part number string from EEPROM
  *  @hw: pointer to hardware structure
- *  @pba_num: stores the part number from the EEPROM
+ *  @pba_num: stores the part number string from the EEPROM
+ *  @pba_num_size: part number string buffer length
  *
- *  Reads the part number from the EEPROM.
+ *  Reads the part number string from the EEPROM.
  **/
-s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num)
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+                                  u32 pba_num_size)
 {
 	s32 ret_val;
 	u16 data;
+	u16 pba_ptr;
+	u16 offset;
+	u16 length;
+
+	if (pba_num == NULL) {
+		hw_dbg(hw, "PBA string buffer was null\n");
+		return IXGBE_ERR_INVALID_ARGUMENT;
+	}
 
 	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
 	if (ret_val) {
 		hw_dbg(hw, "NVM Read Error\n");
 		return ret_val;
 	}
-	*pba_num = (u32)(data << 16);
 
-	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &data);
+	ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr);
 	if (ret_val) {
 		hw_dbg(hw, "NVM Read Error\n");
 		return ret_val;
 	}
-	*pba_num |= data;
+
+	/*
+	 * if data is not ptr guard the PBA must be in legacy format which
+	 * means pba_ptr is actually our second data word for the PBA number
+	 * and we can decode it into an ascii string
+	 */
+	if (data != IXGBE_PBANUM_PTR_GUARD) {
+		hw_dbg(hw, "NVM PBA number is not stored as string\n");
+
+		/* we will need 11 characters to store the PBA */
+		if (pba_num_size < 11) {
+			hw_dbg(hw, "PBA string buffer too small\n");
+			return IXGBE_ERR_NO_SPACE;
+		}
+
+		/* extract hex string from data and pba_ptr */
+		pba_num[0] = (data >> 12) & 0xF;
+		pba_num[1] = (data >> 8) & 0xF;
+		pba_num[2] = (data >> 4) & 0xF;
+		pba_num[3] = data & 0xF;
+		pba_num[4] = (pba_ptr >> 12) & 0xF;
+		pba_num[5] = (pba_ptr >> 8) & 0xF;
+		pba_num[6] = '-';
+		pba_num[7] = 0;
+		pba_num[8] = (pba_ptr >> 4) & 0xF;
+		pba_num[9] = pba_ptr & 0xF;
+
+		/* put a null character on the end of our string */
+		pba_num[10] = '\0';
+
+		/* switch all the data but the '-' to hex char */
+		for (offset = 0; offset < 10; offset++) {
+			if (pba_num[offset] < 0xA)
+				pba_num[offset] += '0';
+			else if (pba_num[offset] < 0x10)
+				pba_num[offset] += 'A' - 0xA;
+		}
+
+		return 0;
+	}
+
+	ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length);
+	if (ret_val) {
+		hw_dbg(hw, "NVM Read Error\n");
+		return ret_val;
+	}
+
+	if (length == 0xFFFF || length == 0) {
+		hw_dbg(hw, "NVM PBA number section invalid length\n");
+		return IXGBE_ERR_PBA_SECTION;
+	}
+
+	/* check if pba_num buffer is big enough */
+	if (pba_num_size  < (((u32)length * 2) - 1)) {
+		hw_dbg(hw, "PBA string buffer too small\n");
+		return IXGBE_ERR_NO_SPACE;
+	}
+
+	/* trim pba length from start of string */
+	pba_ptr++;
+	length--;
+
+	for (offset = 0; offset < length; offset++) {
+		ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data);
+		if (ret_val) {
+			hw_dbg(hw, "NVM Read Error\n");
+			return ret_val;
+		}
+		pba_num[offset * 2] = (u8)(data >> 8);
+		pba_num[(offset * 2) + 1] = (u8)(data & 0xFF);
+	}
+	pba_num[offset * 2] = '\0';
 
 	return 0;
 }
@@ -638,7 +716,7 @@ out:
  *  Polls the status bit (bit 1) of the EERD or EEWR to determine when the
  *  read or write is done respectively.
  **/
-static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
+s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
 {
 	u32 i;
 	u32 reg;
@@ -1009,7 +1087,7 @@ static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
  *  ixgbe_calc_eeprom_checksum - Calculates and returns the checksum
  *  @hw: pointer to hardware structure
  **/
-static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw)
+u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw)
 {
 	u16 i;
 	u16 j;
@@ -1072,7 +1150,7 @@ s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
 	status = hw->eeprom.ops.read(hw, 0, &checksum);
 
 	if (status == 0) {
-		checksum = ixgbe_calc_eeprom_checksum(hw);
+		checksum = hw->eeprom.ops.calc_checksum(hw);
 
 		hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
 
@@ -1110,7 +1188,7 @@ s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
 	status = hw->eeprom.ops.read(hw, 0, &checksum);
 
 	if (status == 0) {
-		checksum = ixgbe_calc_eeprom_checksum(hw);
+		checksum = hw->eeprom.ops.calc_checksum(hw);
 		status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM,
 		                            checksum);
 	} else {
@@ -1595,6 +1673,7 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 	u32 mflcn_reg, fccfg_reg;
 	u32 reg;
 	u32 rx_pba_size;
+	u32 fcrtl, fcrth;
 
 #ifdef CONFIG_DCB
 	if (hw->fc.requested_mode == ixgbe_fc_pfc)
@@ -1671,41 +1750,21 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 	IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
 	IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
 
-	reg = IXGBE_READ_REG(hw, IXGBE_MTQC);
-	/* Thresholds are different for link flow control when in DCB mode */
-	if (reg & IXGBE_MTQC_RT_ENA) {
-		rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
+	rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
+	rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
 
-		/* Always disable XON for LFC when in DCB mode */
-		reg = (rx_pba_size >> 5) & 0xFFE0;
-		IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), reg);
+	fcrth = (rx_pba_size - hw->fc.high_water) << 10;
+	fcrtl = (rx_pba_size - hw->fc.low_water) << 10;
 
-		reg = (rx_pba_size >> 2) & 0xFFE0;
-		if (hw->fc.current_mode & ixgbe_fc_tx_pause)
-			reg |= IXGBE_FCRTH_FCEN;
-		IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), reg);
-	} else {
-		/*
-		 * Set up and enable Rx high/low water mark thresholds,
-		 * enable XON.
-		 */
-		if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
-			if (hw->fc.send_xon) {
-				IXGBE_WRITE_REG(hw,
-				              IXGBE_FCRTL_82599(packetbuf_num),
-			                      (hw->fc.low_water |
-				              IXGBE_FCRTL_XONE));
-			} else {
-				IXGBE_WRITE_REG(hw,
-				              IXGBE_FCRTL_82599(packetbuf_num),
-				              hw->fc.low_water);
-			}
-
-			IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num),
-			               (hw->fc.high_water | IXGBE_FCRTH_FCEN));
-		}
+	if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
+		fcrth |= IXGBE_FCRTH_FCEN;
+		if (hw->fc.send_xon)
+			fcrtl |= IXGBE_FCRTL_XONE;
 	}
 
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), fcrth);
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), fcrtl);
+
 	/* Configure pause time (2 TCs per register) */
 	reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
 	if ((packetbuf_num & 1) == 0)
@@ -2705,3 +2764,112 @@ s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 
 	return 0;
 }
+
+/**
+ *  ixgbe_get_wwn_prefix_generic Get alternative WWNN/WWPN prefix from
+ *  the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @wwnn_prefix: the alternative WWNN prefix
+ *  @wwpn_prefix: the alternative WWPN prefix
+ *
+ *  This function will read the EEPROM from the alternative SAN MAC address
+ *  block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+                                        u16 *wwpn_prefix)
+{
+	u16 offset, caps;
+	u16 alt_san_mac_blk_offset;
+
+	/* clear output first */
+	*wwnn_prefix = 0xFFFF;
+	*wwpn_prefix = 0xFFFF;
+
+	/* check if alternative SAN MAC is supported */
+	hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR,
+	                    &alt_san_mac_blk_offset);
+
+	if ((alt_san_mac_blk_offset == 0) ||
+	    (alt_san_mac_blk_offset == 0xFFFF))
+		goto wwn_prefix_out;
+
+	/* check capability in alternative san mac address block */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
+	hw->eeprom.ops.read(hw, offset, &caps);
+	if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
+		goto wwn_prefix_out;
+
+	/* get the corresponding prefix for WWNN/WWPN */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
+	hw->eeprom.ops.read(hw, offset, wwnn_prefix);
+
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
+	hw->eeprom.ops.read(hw, offset, wwpn_prefix);
+
+wwn_prefix_out:
+	return 0;
+}
+
+/**
+ *  ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for anti-spoofing
+ *  @pf: Physical Function pool - do not enable anti-spoofing for the PF
+ *
+ **/
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf)
+{
+	int j;
+	int pf_target_reg = pf >> 3;
+	int pf_target_shift = pf % 8;
+	u32 pfvfspoof = 0;
+
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
+	if (enable)
+		pfvfspoof = IXGBE_SPOOF_MACAS_MASK;
+
+	/*
+	 * PFVFSPOOF register array is size 8 with 8 bits assigned to
+	 * MAC anti-spoof enables in each register array element.
+	 */
+	for (j = 0; j < IXGBE_PFVFSPOOF_REG_COUNT; j++)
+		IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
+
+	/* If not enabling anti-spoofing then done */
+	if (!enable)
+		return;
+
+	/*
+	 * The PF should be allowed to spoof so that it can support
+	 * emulation mode NICs.  Reset the bit assigned to the PF
+	 */
+	pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg));
+	pfvfspoof ^= (1 << pf_target_shift);
+	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg), pfvfspoof);
+}
+
+/**
+ *  ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable switch for VLAN anti-spoofing
+ *  @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
+ *
+ **/
+void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
+{
+	int vf_target_reg = vf >> 3;
+	int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT;
+	u32 pfvfspoof;
+
+	if (hw->mac.type == ixgbe_mac_82598EB)
+		return;
+
+	pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+	if (enable)
+		pfvfspoof |= (1 << vf_target_shift);
+	else
+		pfvfspoof &= ~(1 << vf_target_shift);
+	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
+}
diff --git a/drivers/net/ixgbe/ixgbe_common.h b/drivers/net/ixgbe/ixgbe_common.h
index 424c223437d..66ed045a8cf 100644
--- a/drivers/net/ixgbe/ixgbe_common.h
+++ b/drivers/net/ixgbe/ixgbe_common.h
@@ -35,7 +35,8 @@ s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw);
 s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
 s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
 s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
-s32 ixgbe_read_pba_num_generic(struct ixgbe_hw *hw, u32 *pba_num);
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+                                  u32 pba_num_size);
 s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
 s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
 void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw);
@@ -49,9 +50,11 @@ s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
 s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
 s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
                                        u16 *data);
+u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw);
 s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
                                            u16 *checksum_val);
 s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
+s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
 
 s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
                           u32 enable_addr);
@@ -81,9 +84,12 @@ s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw);
 s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw,
                                  ixgbe_link_speed *speed,
                                  bool *link_up, bool link_up_wait_to_complete);
-
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+                                 u16 *wwpn_prefix);
 s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
 s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
+void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf);
 
 #define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
 
diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c
index 0d44c6470ca..d16c260c1f5 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.c
+++ b/drivers/net/ixgbe/ixgbe_dcb.c
@@ -42,7 +42,8 @@
  * It should be called only after the rules are checked by
  * ixgbe_dcb_check_config().
  */
-s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_dcb_config *dcb_config,
+s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *hw,
+				   struct ixgbe_dcb_config *dcb_config,
 				   int max_frame, u8 direction)
 {
 	struct tc_bw_alloc *p;
@@ -124,7 +125,8 @@ s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_dcb_config *dcb_config,
 			 * credit may not be enough to send out a TSO
 			 * packet in descriptor plane arbitration.
 			 */
-			if (credit_max &&
+			if ((hw->mac.type == ixgbe_mac_82598EB) &&
+			    credit_max &&
 			    (credit_max < MINIMUM_CREDIT_FOR_TSO))
 				credit_max = MINIMUM_CREDIT_FOR_TSO;
 
@@ -150,10 +152,17 @@ s32 ixgbe_dcb_hw_config(struct ixgbe_hw *hw,
                         struct ixgbe_dcb_config *dcb_config)
 {
 	s32 ret = 0;
-	if (hw->mac.type == ixgbe_mac_82598EB)
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
 		ret = ixgbe_dcb_hw_config_82598(hw, dcb_config);
-	else if (hw->mac.type == ixgbe_mac_82599EB)
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		ret = ixgbe_dcb_hw_config_82599(hw, dcb_config);
+		break;
+	default:
+		break;
+	}
 	return ret;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_dcb.h b/drivers/net/ixgbe/ixgbe_dcb.h
index 0208a87b129..1cfe38ee164 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.h
+++ b/drivers/net/ixgbe/ixgbe_dcb.h
@@ -150,7 +150,8 @@ struct ixgbe_dcb_config {
 /* DCB driver APIs */
 
 /* DCB credits calculation */
-s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_dcb_config *, int, u8);
+s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *,
+				   struct ixgbe_dcb_config *, int, u8);
 
 /* DCB hw initialization */
 s32 ixgbe_dcb_hw_config(struct ixgbe_hw *, struct ixgbe_dcb_config *);
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ixgbe/ixgbe_dcb_82598.c
index 50288bcadc5..9a5e89c12e0 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82598.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82598.c
@@ -256,21 +256,17 @@ s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw,
 	 * for each traffic class.
 	 */
 	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
-		if (dcb_config->rx_pba_cfg == pba_equal) {
-			rx_pba_size = IXGBE_RXPBSIZE_64KB;
-		} else {
-			rx_pba_size = (i < 4) ? IXGBE_RXPBSIZE_80KB
-					      : IXGBE_RXPBSIZE_48KB;
-		}
+		rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
+		rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
+		reg = (rx_pba_size - hw->fc.low_water) << 10;
 
-		reg = ((rx_pba_size >> 5) &  0xFFF0);
 		if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx ||
 		    dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full)
 			reg |= IXGBE_FCRTL_XONE;
 
 		IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), reg);
 
-		reg = ((rx_pba_size >> 2) & 0xFFF0);
+		reg = (rx_pba_size - hw->fc.high_water) << 10;
 		if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx ||
 		    dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full)
 			reg |= IXGBE_FCRTH_FCEN;
diff --git a/drivers/net/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ixgbe/ixgbe_dcb_82599.c
index 05f22471507..374e1f74d0f 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_82599.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_82599.c
@@ -251,19 +251,17 @@ s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw,
 
 	/* Configure PFC Tx thresholds per TC */
 	for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
-		if (dcb_config->rx_pba_cfg == pba_equal)
-			rx_pba_size = IXGBE_RXPBSIZE_64KB;
-		else
-			rx_pba_size = (i < 4) ? IXGBE_RXPBSIZE_80KB
-			                      : IXGBE_RXPBSIZE_48KB;
+		rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
+		rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
+
+		reg = (rx_pba_size - hw->fc.low_water) << 10;
 
-		reg = ((rx_pba_size >> 5) & 0xFFE0);
 		if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full ||
 		    dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx)
 			reg |= IXGBE_FCRTL_XONE;
 		IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
 
-		reg = ((rx_pba_size >> 2) & 0xFFE0);
+		reg = (rx_pba_size - hw->fc.high_water) << 10;
 		if (dcb_config->tc_config[i].dcb_pfc == pfc_enabled_full ||
 		    dcb_config->tc_config[i].dcb_pfc == pfc_enabled_tx)
 			reg |= IXGBE_FCRTH_FCEN;
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index b53b465e24a..bf566e8a455 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -130,15 +130,21 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 			netdev->netdev_ops->ndo_stop(netdev);
 		ixgbe_clear_interrupt_scheme(adapter);
 
-		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+		switch (adapter->hw.mac.type) {
+		case ixgbe_mac_82598EB:
 			adapter->last_lfc_mode = adapter->hw.fc.current_mode;
 			adapter->hw.fc.requested_mode = ixgbe_fc_none;
-		}
-		adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
-		if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+			break;
+		case ixgbe_mac_82599EB:
+		case ixgbe_mac_X540:
 			adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
 			adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+			break;
+		default:
+			break;
 		}
+
 		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
 		ixgbe_init_interrupt_scheme(adapter);
 		if (netif_running(netdev))
@@ -155,8 +161,14 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 			adapter->dcb_cfg.pfc_mode_enable = false;
 			adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
 			adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
-			if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+			switch (adapter->hw.mac.type) {
+			case ixgbe_mac_82599EB:
+			case ixgbe_mac_X540:
 				adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+				break;
+			default:
+				break;
+			}
 
 			ixgbe_init_interrupt_scheme(adapter);
 			if (netif_running(netdev))
@@ -178,9 +190,14 @@ static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev,
 	for (i = 0; i < netdev->addr_len; i++)
 		perm_addr[i] = adapter->hw.mac.perm_addr[i];
 
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		for (j = 0; j < netdev->addr_len; j++, i++)
 			perm_addr[i] = adapter->hw.mac.san_addr[j];
+		break;
+	default:
+		break;
 	}
 }
 
@@ -366,15 +383,29 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
 	}
 
 	if (adapter->dcb_cfg.pfc_mode_enable) {
-		if ((adapter->hw.mac.type != ixgbe_mac_82598EB) &&
-			(adapter->hw.fc.current_mode != ixgbe_fc_pfc))
-			adapter->last_lfc_mode = adapter->hw.fc.current_mode;
+		switch (adapter->hw.mac.type) {
+		case ixgbe_mac_82599EB:
+		case ixgbe_mac_X540:
+			if (adapter->hw.fc.current_mode != ixgbe_fc_pfc)
+				adapter->last_lfc_mode =
+				                  adapter->hw.fc.current_mode;
+			break;
+		default:
+			break;
+		}
 		adapter->hw.fc.requested_mode = ixgbe_fc_pfc;
 	} else {
-		if (adapter->hw.mac.type != ixgbe_mac_82598EB)
-			adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
-		else
+		switch (adapter->hw.mac.type) {
+		case ixgbe_mac_82598EB:
 			adapter->hw.fc.requested_mode = ixgbe_fc_none;
+			break;
+		case ixgbe_mac_82599EB:
+		case ixgbe_mac_X540:
+			adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+			break;
+		default:
+			break;
+		}
 	}
 
 	if (adapter->dcb_set_bitmap & BIT_RESETLINK) {
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 3dc731c22ff..23ff23e8b39 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -185,6 +185,16 @@ static int ixgbe_get_settings(struct net_device *netdev,
 					     ADVERTISED_FIBRE);
 			ecmd->port = PORT_FIBRE;
 			ecmd->autoneg = AUTONEG_DISABLE;
+		} else if ((hw->device_id == IXGBE_DEV_ID_82599_COMBO_BACKPLANE) ||
+			   (hw->device_id == IXGBE_DEV_ID_82599_KX4_MEZZ)) {
+			ecmd->supported |= (SUPPORTED_1000baseT_Full |
+					    SUPPORTED_Autoneg |
+					    SUPPORTED_FIBRE);
+			ecmd->advertising = (ADVERTISED_10000baseT_Full |
+					     ADVERTISED_1000baseT_Full |
+					     ADVERTISED_Autoneg |
+					     ADVERTISED_FIBRE);
+			ecmd->port = PORT_FIBRE;
 		} else {
 			ecmd->supported |= (SUPPORTED_1000baseT_Full |
 					    SUPPORTED_FIBRE);
@@ -204,6 +214,7 @@ static int ixgbe_get_settings(struct net_device *netdev,
 	/* Get PHY type */
 	switch (adapter->hw.phy.type) {
 	case ixgbe_phy_tn:
+	case ixgbe_phy_aq:
 	case ixgbe_phy_cu_unknown:
 		/* Copper 10G-BASET */
 		ecmd->port = PORT_TP;
@@ -332,13 +343,6 @@ static void ixgbe_get_pauseparam(struct net_device *netdev,
 	else
 		pause->autoneg = 1;
 
-#ifdef CONFIG_DCB
-	if (hw->fc.current_mode == ixgbe_fc_pfc) {
-		pause->rx_pause = 0;
-		pause->tx_pause = 0;
-	}
-
-#endif
 	if (hw->fc.current_mode == ixgbe_fc_rx_pause) {
 		pause->rx_pause = 1;
 	} else if (hw->fc.current_mode == ixgbe_fc_tx_pause) {
@@ -346,6 +350,11 @@ static void ixgbe_get_pauseparam(struct net_device *netdev,
 	} else if (hw->fc.current_mode == ixgbe_fc_full) {
 		pause->rx_pause = 1;
 		pause->tx_pause = 1;
+#ifdef CONFIG_DCB
+	} else if (hw->fc.current_mode == ixgbe_fc_pfc) {
+		pause->rx_pause = 0;
+		pause->tx_pause = 0;
+#endif
 	}
 }
 
@@ -363,7 +372,6 @@ static int ixgbe_set_pauseparam(struct net_device *netdev,
 		return -EINVAL;
 
 #endif
-
 	fc = hw->fc;
 
 	if (pause->autoneg != AUTONEG_ENABLE)
@@ -412,11 +420,6 @@ static int ixgbe_set_rx_csum(struct net_device *netdev, u32 data)
 	else
 		adapter->flags &= ~IXGBE_FLAG_RX_CSUM_ENABLED;
 
-	if (netif_running(netdev))
-		ixgbe_reinit_locked(adapter);
-	else
-		ixgbe_reset(adapter);
-
 	return 0;
 }
 
@@ -428,16 +431,21 @@ static u32 ixgbe_get_tx_csum(struct net_device *netdev)
 static int ixgbe_set_tx_csum(struct net_device *netdev, u32 data)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	u32 feature_list;
 
-	if (data) {
-		netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-		if (adapter->hw.mac.type == ixgbe_mac_82599EB)
-			netdev->features |= NETIF_F_SCTP_CSUM;
-	} else {
-		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-		if (adapter->hw.mac.type == ixgbe_mac_82599EB)
-			netdev->features &= ~NETIF_F_SCTP_CSUM;
+	feature_list = (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		feature_list |= NETIF_F_SCTP_CSUM;
+		break;
+	default:
+		break;
 	}
+	if (data)
+		netdev->features |= feature_list;
+	else
+		netdev->features &= ~feature_list;
 
 	return 0;
 }
@@ -530,10 +538,20 @@ static void ixgbe_get_regs(struct net_device *netdev,
 	regs_buff[32] = IXGBE_READ_REG(hw, IXGBE_FCTTV(1));
 	regs_buff[33] = IXGBE_READ_REG(hw, IXGBE_FCTTV(2));
 	regs_buff[34] = IXGBE_READ_REG(hw, IXGBE_FCTTV(3));
-	for (i = 0; i < 8; i++)
-		regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL(i));
-	for (i = 0; i < 8; i++)
-		regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH(i));
+	for (i = 0; i < 8; i++) {
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL(i));
+			regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH(i));
+			break;
+		case ixgbe_mac_82599EB:
+			regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL_82599(i));
+			regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH_82599(i));
+			break;
+		default:
+			break;
+		}
+	}
 	regs_buff[51] = IXGBE_READ_REG(hw, IXGBE_FCRTV);
 	regs_buff[52] = IXGBE_READ_REG(hw, IXGBE_TFCS);
 
@@ -615,6 +633,7 @@ static void ixgbe_get_regs(struct net_device *netdev,
 	regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM);
 	regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT(0));
 
+	/* DCB */
 	regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS);
 	regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS);
 	regs_buff[831] = IXGBE_READ_REG(hw, IXGBE_PDPMCS);
@@ -820,9 +839,10 @@ static void ixgbe_get_drvinfo(struct net_device *netdev,
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	char firmware_version[32];
 
-	strncpy(drvinfo->driver, ixgbe_driver_name, sizeof(drvinfo->driver));
+	strncpy(drvinfo->driver, ixgbe_driver_name,
+	        sizeof(drvinfo->driver) - 1);
 	strncpy(drvinfo->version, ixgbe_driver_version,
-	        sizeof(drvinfo->version));
+	        sizeof(drvinfo->version) - 1);
 
 	snprintf(firmware_version, sizeof(firmware_version), "%d.%d-%d",
 	         (adapter->eeprom_version & 0xF000) >> 12,
@@ -905,13 +925,11 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 			memcpy(&temp_tx_ring[i], adapter->tx_ring[i],
 			       sizeof(struct ixgbe_ring));
 			temp_tx_ring[i].count = new_tx_count;
-			err = ixgbe_setup_tx_resources(adapter,
-			                               &temp_tx_ring[i]);
+			err = ixgbe_setup_tx_resources(&temp_tx_ring[i]);
 			if (err) {
 				while (i) {
 					i--;
-					ixgbe_free_tx_resources(adapter,
-					                      &temp_tx_ring[i]);
+					ixgbe_free_tx_resources(&temp_tx_ring[i]);
 				}
 				goto clear_reset;
 			}
@@ -930,13 +948,11 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 			memcpy(&temp_rx_ring[i], adapter->rx_ring[i],
 			       sizeof(struct ixgbe_ring));
 			temp_rx_ring[i].count = new_rx_count;
-			err = ixgbe_setup_rx_resources(adapter,
-			                               &temp_rx_ring[i]);
+			err = ixgbe_setup_rx_resources(&temp_rx_ring[i]);
 			if (err) {
 				while (i) {
 					i--;
-					ixgbe_free_rx_resources(adapter,
-					                      &temp_rx_ring[i]);
+					ixgbe_free_rx_resources(&temp_rx_ring[i]);
 				}
 				goto err_setup;
 			}
@@ -951,8 +967,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 		/* tx */
 		if (new_tx_count != adapter->tx_ring_count) {
 			for (i = 0; i < adapter->num_tx_queues; i++) {
-				ixgbe_free_tx_resources(adapter,
-				                        adapter->tx_ring[i]);
+				ixgbe_free_tx_resources(adapter->tx_ring[i]);
 				memcpy(adapter->tx_ring[i], &temp_tx_ring[i],
 				       sizeof(struct ixgbe_ring));
 			}
@@ -962,8 +977,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev,
 		/* rx */
 		if (new_rx_count != adapter->rx_ring_count) {
 			for (i = 0; i < adapter->num_rx_queues; i++) {
-				ixgbe_free_rx_resources(adapter,
-				                        adapter->rx_ring[i]);
+				ixgbe_free_rx_resources(adapter->rx_ring[i]);
 				memcpy(adapter->rx_ring[i], &temp_rx_ring[i],
 				       sizeof(struct ixgbe_ring));
 			}
@@ -1144,7 +1158,7 @@ struct ixgbe_reg_test {
 #define TABLE64_TEST_HI	6
 
 /* default 82599 register test */
-static struct ixgbe_reg_test reg_test_82599[] = {
+static const struct ixgbe_reg_test reg_test_82599[] = {
 	{ IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
 	{ IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
 	{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
@@ -1168,7 +1182,7 @@ static struct ixgbe_reg_test reg_test_82599[] = {
 };
 
 /* default 82598 register test */
-static struct ixgbe_reg_test reg_test_82598[] = {
+static const struct ixgbe_reg_test reg_test_82598[] = {
 	{ IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
 	{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
 	{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
@@ -1195,18 +1209,22 @@ static struct ixgbe_reg_test reg_test_82598[] = {
 	{ 0, 0, 0, 0 }
 };
 
+static const u32 register_test_patterns[] = {
+	0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
+};
+
 #define REG_PATTERN_TEST(R, M, W)                                             \
 {                                                                             \
 	u32 pat, val, before;                                                 \
-	const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
-	for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {                       \
+	for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) {      \
 		before = readl(adapter->hw.hw_addr + R);                      \
-		writel((_test[pat] & W), (adapter->hw.hw_addr + R));          \
+		writel((register_test_patterns[pat] & W),                     \
+		       (adapter->hw.hw_addr + R));                            \
 		val = readl(adapter->hw.hw_addr + R);                         \
-		if (val != (_test[pat] & W & M)) {                            \
-			e_err(drv, "pattern test reg %04X failed: got "   \
-			      "0x%08X expected 0x%08X\n",		      \
-			      R, val, (_test[pat] & W & M));                \
+		if (val != (register_test_patterns[pat] & W & M)) {           \
+			e_err(drv, "pattern test reg %04X failed: got "       \
+			      "0x%08X expected 0x%08X\n",                     \
+			      R, val, (register_test_patterns[pat] & W & M)); \
 			*data = R;                                            \
 			writel(before, adapter->hw.hw_addr + R);              \
 			return 1;                                             \
@@ -1233,16 +1251,24 @@ static struct ixgbe_reg_test reg_test_82598[] = {
 
 static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
 {
-	struct ixgbe_reg_test *test;
+	const struct ixgbe_reg_test *test;
 	u32 value, before, after;
 	u32 i, toggle;
 
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-		toggle = 0x7FFFF30F;
-		test = reg_test_82599;
-	} else {
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
 		toggle = 0x7FFFF3FF;
 		test = reg_test_82598;
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		toggle = 0x7FFFF30F;
+		test = reg_test_82599;
+		break;
+	default:
+		*data = 1;
+		return 1;
+		break;
 	}
 
 	/*
@@ -1460,16 +1486,21 @@ static void ixgbe_free_desc_rings(struct ixgbe_adapter *adapter)
 	reg_ctl &= ~IXGBE_TXDCTL_ENABLE;
 	IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx), reg_ctl);
 
-	if (hw->mac.type == ixgbe_mac_82599EB) {
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		reg_ctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
 		reg_ctl &= ~IXGBE_DMATXCTL_TE;
 		IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg_ctl);
+		break;
+	default:
+		break;
 	}
 
 	ixgbe_reset(adapter);
 
-	ixgbe_free_tx_resources(adapter, &adapter->test_tx_ring);
-	ixgbe_free_rx_resources(adapter, &adapter->test_rx_ring);
+	ixgbe_free_tx_resources(&adapter->test_tx_ring);
+	ixgbe_free_rx_resources(&adapter->test_rx_ring);
 }
 
 static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter)
@@ -1483,17 +1514,24 @@ static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter)
 	/* Setup Tx descriptor ring and Tx buffers */
 	tx_ring->count = IXGBE_DEFAULT_TXD;
 	tx_ring->queue_index = 0;
+	tx_ring->dev = &adapter->pdev->dev;
+	tx_ring->netdev = adapter->netdev;
 	tx_ring->reg_idx = adapter->tx_ring[0]->reg_idx;
 	tx_ring->numa_node = adapter->node;
 
-	err = ixgbe_setup_tx_resources(adapter, tx_ring);
+	err = ixgbe_setup_tx_resources(tx_ring);
 	if (err)
 		return 1;
 
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_DMATXCTL);
 		reg_data |= IXGBE_DMATXCTL_TE;
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DMATXCTL, reg_data);
+		break;
+	default:
+		break;
 	}
 
 	ixgbe_configure_tx_ring(adapter, tx_ring);
@@ -1501,11 +1539,13 @@ static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter)
 	/* Setup Rx Descriptor ring and Rx buffers */
 	rx_ring->count = IXGBE_DEFAULT_RXD;
 	rx_ring->queue_index = 0;
+	rx_ring->dev = &adapter->pdev->dev;
+	rx_ring->netdev = adapter->netdev;
 	rx_ring->reg_idx = adapter->rx_ring[0]->reg_idx;
 	rx_ring->rx_buf_len = IXGBE_RXBUFFER_2048;
 	rx_ring->numa_node = adapter->node;
 
-	err = ixgbe_setup_rx_resources(adapter, rx_ring);
+	err = ixgbe_setup_rx_resources(rx_ring);
 	if (err) {
 		ret_val = 4;
 		goto err_nomem;
@@ -1604,8 +1644,7 @@ static int ixgbe_check_lbtest_frame(struct sk_buff *skb,
 	return 13;
 }
 
-static u16 ixgbe_clean_test_rings(struct ixgbe_adapter *adapter,
-                                  struct ixgbe_ring *rx_ring,
+static u16 ixgbe_clean_test_rings(struct ixgbe_ring *rx_ring,
                                   struct ixgbe_ring *tx_ring,
                                   unsigned int size)
 {
@@ -1627,7 +1666,7 @@ static u16 ixgbe_clean_test_rings(struct ixgbe_adapter *adapter,
 		rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc];
 
 		/* unmap Rx buffer, will be remapped by alloc_rx_buffers */
-		dma_unmap_single(&adapter->pdev->dev,
+		dma_unmap_single(rx_ring->dev,
 		                 rx_buffer_info->dma,
 				 bufsz,
 				 DMA_FROM_DEVICE);
@@ -1639,7 +1678,7 @@ static u16 ixgbe_clean_test_rings(struct ixgbe_adapter *adapter,
 
 		/* unmap buffer on Tx side */
 		tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc];
-		ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
+		ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
 
 		/* increment Rx/Tx next to clean counters */
 		rx_ntc++;
@@ -1655,7 +1694,7 @@ static u16 ixgbe_clean_test_rings(struct ixgbe_adapter *adapter,
 	}
 
 	/* re-map buffers to ring, store next to clean values */
-	ixgbe_alloc_rx_buffers(adapter, rx_ring, count);
+	ixgbe_alloc_rx_buffers(rx_ring, count);
 	rx_ring->next_to_clean = rx_ntc;
 	tx_ring->next_to_clean = tx_ntc;
 
@@ -1699,7 +1738,6 @@ static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter)
 		for (i = 0; i < 64; i++) {
 			skb_get(skb);
 			tx_ret_val = ixgbe_xmit_frame_ring(skb,
-							   adapter->netdev,
 							   adapter,
 							   tx_ring);
 			if (tx_ret_val == NETDEV_TX_OK)
@@ -1714,8 +1752,7 @@ static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter)
 		/* allow 200 milliseconds for packets to go from Tx to Rx */
 		msleep(200);
 
-		good_cnt = ixgbe_clean_test_rings(adapter, rx_ring,
-						  tx_ring, size);
+		good_cnt = ixgbe_clean_test_rings(rx_ring, tx_ring, size);
 		if (good_cnt != 64) {
 			ret_val = 13;
 			break;
@@ -1847,7 +1884,25 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
 	struct ixgbe_hw *hw = &adapter->hw;
 	int retval = 1;
 
+	/* WOL not supported except for the following */
 	switch(hw->device_id) {
+	case IXGBE_DEV_ID_82599_SFP:
+		/* Only this subdevice supports WOL */
+		if (hw->subsystem_device_id != IXGBE_SUBDEV_ID_82599_SFP) {
+			wol->supported = 0;
+			break;
+		}
+		retval = 0;
+		break;
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+		/* All except this subdevice support WOL */
+		if (hw->subsystem_device_id ==
+		    IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) {
+			wol->supported = 0;
+			break;
+		}
+		retval = 0;
+		break;
 	case IXGBE_DEV_ID_82599_KX4:
 		retval = 0;
 		break;
@@ -1985,6 +2040,41 @@ static int ixgbe_get_coalesce(struct net_device *netdev,
 	return 0;
 }
 
+/*
+ * this function must be called before setting the new value of
+ * rx_itr_setting
+ */
+static bool ixgbe_update_rsc(struct ixgbe_adapter *adapter,
+			     struct ethtool_coalesce *ec)
+{
+	struct net_device *netdev = adapter->netdev;
+
+	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
+		return false;
+
+	/* if interrupt rate is too high then disable RSC */
+	if (ec->rx_coalesce_usecs != 1 &&
+	    ec->rx_coalesce_usecs <= 1000000/IXGBE_MAX_RSC_INT_RATE) {
+		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
+			e_info(probe, "rx-usecs set too low, "
+				      "disabling RSC\n");
+			adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
+			return true;
+		}
+	} else {
+		/* check the feature flag value and enable RSC if necessary */
+		if ((netdev->features & NETIF_F_LRO) &&
+		    !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) {
+			e_info(probe, "rx-usecs set to %d, "
+				      "re-enabling RSC\n",
+			       ec->rx_coalesce_usecs);
+			adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
+			return true;
+		}
+	}
+	return false;
+}
+
 static int ixgbe_set_coalesce(struct net_device *netdev,
                               struct ethtool_coalesce *ec)
 {
@@ -2002,17 +2092,14 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 		adapter->tx_ring[0]->work_limit = ec->tx_max_coalesced_frames_irq;
 
 	if (ec->rx_coalesce_usecs > 1) {
-		u32 max_int;
-		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
-			max_int = IXGBE_MAX_RSC_INT_RATE;
-		else
-			max_int = IXGBE_MAX_INT_RATE;
-
 		/* check the limits */
-		if ((1000000/ec->rx_coalesce_usecs > max_int) ||
+		if ((1000000/ec->rx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
 		    (1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE))
 			return -EINVAL;
 
+		/* check the old value and enable RSC if necessary */
+		need_reset = ixgbe_update_rsc(adapter, ec);
+
 		/* store the value in ints/second */
 		adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
 
@@ -2021,32 +2108,21 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 		/* clear the lower bit as its used for dynamic state */
 		adapter->rx_itr_setting &= ~1;
 	} else if (ec->rx_coalesce_usecs == 1) {
+		/* check the old value and enable RSC if necessary */
+		need_reset = ixgbe_update_rsc(adapter, ec);
+
 		/* 1 means dynamic mode */
 		adapter->rx_eitr_param = 20000;
 		adapter->rx_itr_setting = 1;
 	} else {
+		/* check the old value and enable RSC if necessary */
+		need_reset = ixgbe_update_rsc(adapter, ec);
 		/*
 		 * any other value means disable eitr, which is best
 		 * served by setting the interrupt rate very high
 		 */
 		adapter->rx_eitr_param = IXGBE_MAX_INT_RATE;
 		adapter->rx_itr_setting = 0;
-
-		/*
-		 * if hardware RSC is enabled, disable it when
-		 * setting low latency mode, to avoid errata, assuming
-		 * that when the user set low latency mode they want
-		 * it at the cost of anything else
-		 */
-		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
-			adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
-			if (netdev->features & NETIF_F_LRO) {
-				netdev->features &= ~NETIF_F_LRO;
-				e_info(probe, "rx-usecs set to 0, "
-				       "disabling RSC\n");
-			}
-			need_reset = true;
-		}
 	}
 
 	if (ec->tx_coalesce_usecs > 1) {
@@ -2127,34 +2203,45 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)
 	need_reset = (data & ETH_FLAG_RXVLAN) !=
 		     (netdev->features & NETIF_F_HW_VLAN_RX);
 
-	rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_LRO |
+	rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_LRO | ETH_FLAG_NTUPLE |
 					ETH_FLAG_RXVLAN | ETH_FLAG_TXVLAN);
 	if (rc)
 		return rc;
 
 	/* if state changes we need to update adapter->flags and reset */
-	if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) {
-		/*
-		 * cast both to bool and verify if they are set the same
-		 * but only enable RSC if itr is non-zero, as
-		 * itr=0 and RSC are mutually exclusive
-		 */
-		if (((!!(data & ETH_FLAG_LRO)) !=
-		     (!!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) &&
-		    adapter->rx_itr_setting) {
+	if ((adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) &&
+	    (!!(data & ETH_FLAG_LRO) !=
+	     !!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) {
+		if ((data & ETH_FLAG_LRO) &&
+		    (!adapter->rx_itr_setting ||
+		     (adapter->rx_itr_setting > IXGBE_MAX_RSC_INT_RATE))) {
+			e_info(probe, "rx-usecs set too low, "
+				      "not enabling RSC.\n");
+		} else {
 			adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED;
 			switch (adapter->hw.mac.type) {
 			case ixgbe_mac_82599EB:
 				need_reset = true;
 				break;
+			case ixgbe_mac_X540: {
+				int i;
+				for (i = 0; i < adapter->num_rx_queues; i++) {
+					struct ixgbe_ring *ring =
+					                  adapter->rx_ring[i];
+					if (adapter->flags2 &
+					    IXGBE_FLAG2_RSC_ENABLED) {
+						ixgbe_configure_rscctl(adapter,
+						                       ring);
+					} else {
+						ixgbe_clear_rscctl(adapter,
+						                   ring);
+					}
+				}
+			}
+				break;
 			default:
 				break;
 			}
-		} else if (!adapter->rx_itr_setting) {
-			netdev->features &= ~NETIF_F_LRO;
-			if (data & ETH_FLAG_LRO)
-				e_info(probe, "rx-usecs set to 0, "
-				       "LRO/RSC cannot be enabled.\n");
 		}
 	}
 
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index 05efa6a8ce8..6342d485979 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -68,7 +68,7 @@ static inline bool ixgbe_rx_is_fcoe(union ixgbe_adv_rx_desc *rx_desc)
 static inline void ixgbe_fcoe_clear_ddp(struct ixgbe_fcoe_ddp *ddp)
 {
 	ddp->len = 0;
-	ddp->err = 0;
+	ddp->err = 1;
 	ddp->udl = NULL;
 	ddp->udp = 0UL;
 	ddp->sgl = NULL;
@@ -92,6 +92,7 @@ int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid)
 	struct ixgbe_fcoe *fcoe;
 	struct ixgbe_adapter *adapter;
 	struct ixgbe_fcoe_ddp *ddp;
+	u32 fcbuff;
 
 	if (!netdev)
 		goto out_ddp_put;
@@ -115,7 +116,14 @@ int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid)
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCBUFF, 0);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW,
 				(xid | IXGBE_FCDMARW_WE));
+
+		/* guaranteed to be invalidated after 100us */
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW,
+				(xid | IXGBE_FCDMARW_RE));
+		fcbuff = IXGBE_READ_REG(&adapter->hw, IXGBE_FCBUFF);
 		spin_unlock_bh(&fcoe->lock);
+		if (fcbuff & IXGBE_FCBUFF_VALID)
+			udelay(100);
 	}
 	if (ddp->sgl)
 		pci_unmap_sg(adapter->pdev, ddp->sgl, ddp->sgc,
@@ -168,6 +176,11 @@ int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
 		return 0;
 	}
 
+	/* no DDP if we are already down or resetting */
+	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+	    test_bit(__IXGBE_RESETTING, &adapter->state))
+		return 0;
+
 	fcoe = &adapter->fcoe;
 	if (!fcoe->pool) {
 		e_warn(drv, "xid=0x%x no ddp pool for fcoe\n", xid);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 2bd3eb4ee5a..38ab4f3f819 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -52,13 +52,14 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
 			      "Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "2.0.84-k2"
+#define DRV_VERSION "3.0.12-k2"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation.";
 
 static const struct ixgbe_info *ixgbe_info_tbl[] = {
 	[board_82598] = &ixgbe_82598_info,
 	[board_82599] = &ixgbe_82599_info,
+	[board_X540] = &ixgbe_X540_info,
 };
 
 /* ixgbe_pci_tbl - PCI Device ID Table
@@ -108,10 +109,16 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = {
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_BACKPLANE_FCOE),
+	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_FCOE),
+	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM),
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T),
+	 board_X540 },
 
 	/* required last entry */
 	{0, }
@@ -560,6 +567,7 @@ static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction,
 		IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar);
 		break;
 	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		if (direction == -1) {
 			/* other causes */
 			msix_vector |= IXGBE_IVAR_ALLOC_VAL;
@@ -589,29 +597,34 @@ static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter,
 {
 	u32 mask;
 
-	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
 		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
-	} else {
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		mask = (qmask & 0xFFFFFFFF);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask);
 		mask = (qmask >> 32);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask);
+		break;
+	default:
+		break;
 	}
 }
 
-void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
-				      struct ixgbe_tx_buffer
-				      *tx_buffer_info)
+void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *tx_ring,
+				      struct ixgbe_tx_buffer *tx_buffer_info)
 {
 	if (tx_buffer_info->dma) {
 		if (tx_buffer_info->mapped_as_page)
-			dma_unmap_page(&adapter->pdev->dev,
+			dma_unmap_page(tx_ring->dev,
 				       tx_buffer_info->dma,
 				       tx_buffer_info->length,
 				       DMA_TO_DEVICE);
 		else
-			dma_unmap_single(&adapter->pdev->dev,
+			dma_unmap_single(tx_ring->dev,
 					 tx_buffer_info->dma,
 					 tx_buffer_info->length,
 					 DMA_TO_DEVICE);
@@ -626,92 +639,166 @@ void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
 }
 
 /**
- * ixgbe_tx_xon_state - check the tx ring xon state
- * @adapter: the ixgbe adapter
- * @tx_ring: the corresponding tx_ring
+ * ixgbe_dcb_txq_to_tc - convert a reg index to a traffic class
+ * @adapter: driver private struct
+ * @index: reg idx of queue to query (0-127)
  *
- * If not in DCB mode, checks TFCS.TXOFF, otherwise, find out the
- * corresponding TC of this tx_ring when checking TFCS.
+ * Helper function to determine the traffic index for a paticular
+ * register index.
  *
- * Returns : true if in xon state (currently not paused)
+ * Returns : a tc index for use in range 0-7, or 0-3
  */
-static inline bool ixgbe_tx_xon_state(struct ixgbe_adapter *adapter,
-				      struct ixgbe_ring *tx_ring)
+u8 ixgbe_dcb_txq_to_tc(struct ixgbe_adapter *adapter, u8 reg_idx)
 {
-	u32 txoff = IXGBE_TFCS_TXOFF;
+	int tc = -1;
+	int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
 
-#ifdef CONFIG_IXGBE_DCB
-	if (adapter->dcb_cfg.pfc_mode_enable) {
-		int tc;
-		int reg_idx = tx_ring->reg_idx;
-		int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
+	/* if DCB is not enabled the queues have no TC */
+	if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
+		return tc;
+
+	/* check valid range */
+	if (reg_idx >= adapter->hw.mac.max_tx_queues)
+		return tc;
+
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
+		tc = reg_idx >> 2;
+		break;
+	default:
+		if (dcb_i != 4 && dcb_i != 8)
+			break;
+
+		/* if VMDq is enabled the lowest order bits determine TC */
+		if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
+				      IXGBE_FLAG_VMDQ_ENABLED)) {
+			tc = reg_idx & (dcb_i - 1);
+			break;
+		}
+
+		/*
+		 * Convert the reg_idx into the correct TC. This bitmask
+		 * targets the last full 32 ring traffic class and assigns
+		 * it a value of 1. From there the rest of the rings are
+		 * based on shifting the mask further up to include the
+		 * reg_idx / 16 and then reg_idx / 8. It assumes dcB_i
+		 * will only ever be 8 or 4 and that reg_idx will never
+		 * be greater then 128. The code without the power of 2
+		 * optimizations would be:
+		 * (((reg_idx % 32) + 32) * dcb_i) >> (9 - reg_idx / 32)
+		 */
+		tc = ((reg_idx & 0X1F) + 0x20) * dcb_i;
+		tc >>= 9 - (reg_idx >> 5);
+	}
+
+	return tc;
+}
+
+static void ixgbe_update_xoff_received(struct ixgbe_adapter *adapter)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_hw_stats *hwstats = &adapter->stats;
+	u32 data = 0;
+	u32 xoff[8] = {0};
+	int i;
 
-		switch (adapter->hw.mac.type) {
+	if ((hw->fc.current_mode == ixgbe_fc_full) ||
+	    (hw->fc.current_mode == ixgbe_fc_rx_pause)) {
+		switch (hw->mac.type) {
 		case ixgbe_mac_82598EB:
-			tc = reg_idx >> 2;
-			txoff = IXGBE_TFCS_TXOFF0;
+			data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
 			break;
-		case ixgbe_mac_82599EB:
-			tc = 0;
-			txoff = IXGBE_TFCS_TXOFF;
-			if (dcb_i == 8) {
-				/* TC0, TC1 */
-				tc = reg_idx >> 5;
-				if (tc == 2) /* TC2, TC3 */
-					tc += (reg_idx - 64) >> 4;
-				else if (tc == 3) /* TC4, TC5, TC6, TC7 */
-					tc += 1 + ((reg_idx - 96) >> 3);
-			} else if (dcb_i == 4) {
-				/* TC0, TC1 */
-				tc = reg_idx >> 6;
-				if (tc == 1) {
-					tc += (reg_idx - 64) >> 5;
-					if (tc == 2) /* TC2, TC3 */
-						tc += (reg_idx - 96) >> 4;
-				}
-			}
+		default:
+			data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
+		}
+		hwstats->lxoffrxc += data;
+
+		/* refill credits (no tx hang) if we received xoff */
+		if (!data)
+			return;
+
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			clear_bit(__IXGBE_HANG_CHECK_ARMED,
+				  &adapter->tx_ring[i]->state);
+		return;
+	} else if (!(adapter->dcb_cfg.pfc_mode_enable))
+		return;
+
+	/* update stats for each tc, only valid with PFC enabled */
+	for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) {
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
+			xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
 			break;
 		default:
-			tc = 0;
+			xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
 		}
-		txoff <<= tc;
+		hwstats->pxoffrxc[i] += xoff[i];
+	}
+
+	/* disarm tx queues that have received xoff frames */
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
+		u32 tc = ixgbe_dcb_txq_to_tc(adapter, tx_ring->reg_idx);
+
+		if (xoff[tc])
+			clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state);
 	}
-#endif
-	return IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & txoff;
 }
 
-static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
-				       struct ixgbe_ring *tx_ring,
-				       unsigned int eop)
+static u64 ixgbe_get_tx_completed(struct ixgbe_ring *ring)
 {
+	return ring->tx_stats.completed;
+}
+
+static u64 ixgbe_get_tx_pending(struct ixgbe_ring *ring)
+{
+	struct ixgbe_adapter *adapter = netdev_priv(ring->netdev);
 	struct ixgbe_hw *hw = &adapter->hw;
 
-	/* Detect a transmit hang in hardware, this serializes the
-	 * check with the clearing of time_stamp and movement of eop */
-	adapter->detect_tx_hung = false;
-	if (tx_ring->tx_buffer_info[eop].time_stamp &&
-	    time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) &&
-	    ixgbe_tx_xon_state(adapter, tx_ring)) {
-		/* detected Tx unit hang */
-		union ixgbe_adv_tx_desc *tx_desc;
-		tx_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
-		e_err(drv, "Detected Tx Unit Hang\n"
-		      "  Tx Queue             <%d>\n"
-		      "  TDH, TDT             <%x>, <%x>\n"
-		      "  next_to_use          <%x>\n"
-		      "  next_to_clean        <%x>\n"
-		      "tx_buffer_info[next_to_clean]\n"
-		      "  time_stamp           <%lx>\n"
-		      "  jiffies              <%lx>\n",
-		      tx_ring->queue_index,
-		      IXGBE_READ_REG(hw, tx_ring->head),
-		      IXGBE_READ_REG(hw, tx_ring->tail),
-		      tx_ring->next_to_use, eop,
-		      tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
-		return true;
+	u32 head = IXGBE_READ_REG(hw, IXGBE_TDH(ring->reg_idx));
+	u32 tail = IXGBE_READ_REG(hw, IXGBE_TDT(ring->reg_idx));
+
+	if (head != tail)
+		return (head < tail) ?
+			tail - head : (tail + ring->count - head);
+
+	return 0;
+}
+
+static inline bool ixgbe_check_tx_hang(struct ixgbe_ring *tx_ring)
+{
+	u32 tx_done = ixgbe_get_tx_completed(tx_ring);
+	u32 tx_done_old = tx_ring->tx_stats.tx_done_old;
+	u32 tx_pending = ixgbe_get_tx_pending(tx_ring);
+	bool ret = false;
+
+	clear_check_for_tx_hang(tx_ring);
+
+	/*
+	 * Check for a hung queue, but be thorough. This verifies
+	 * that a transmit has been completed since the previous
+	 * check AND there is at least one packet pending. The
+	 * ARMED bit is set to indicate a potential hang. The
+	 * bit is cleared if a pause frame is received to remove
+	 * false hang detection due to PFC or 802.3x frames. By
+	 * requiring this to fail twice we avoid races with
+	 * pfc clearing the ARMED bit and conditions where we
+	 * run the check_tx_hang logic with a transmit completion
+	 * pending but without time to complete it yet.
+	 */
+	if ((tx_done_old == tx_done) && tx_pending) {
+		/* make sure it is true for two checks in a row */
+		ret = test_and_set_bit(__IXGBE_HANG_CHECK_ARMED,
+				       &tx_ring->state);
+	} else {
+		/* update completed stats and continue */
+		tx_ring->tx_stats.tx_done_old = tx_done;
+		/* reset the countdown */
+		clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state);
 	}
 
-	return false;
+	return ret;
 }
 
 #define IXGBE_MAX_TXD_PWR       14
@@ -734,11 +821,10 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 			       struct ixgbe_ring *tx_ring)
 {
 	struct ixgbe_adapter *adapter = q_vector->adapter;
-	struct net_device *netdev = adapter->netdev;
 	union ixgbe_adv_tx_desc *tx_desc, *eop_desc;
 	struct ixgbe_tx_buffer *tx_buffer_info;
-	unsigned int i, eop, count = 0;
 	unsigned int total_bytes = 0, total_packets = 0;
+	u16 i, eop, count = 0;
 
 	i = tx_ring->next_to_clean;
 	eop = tx_ring->tx_buffer_info[i].next_to_watch;
@@ -749,147 +835,182 @@ static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
 		bool cleaned = false;
 		rmb(); /* read buffer_info after eop_desc */
 		for ( ; !cleaned; count++) {
-			struct sk_buff *skb;
 			tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
 			tx_buffer_info = &tx_ring->tx_buffer_info[i];
-			cleaned = (i == eop);
-			skb = tx_buffer_info->skb;
-
-			if (cleaned && skb) {
-				unsigned int segs, bytecount;
-				unsigned int hlen = skb_headlen(skb);
-
-				/* gso_segs is currently only valid for tcp */
-				segs = skb_shinfo(skb)->gso_segs ?: 1;
-#ifdef IXGBE_FCOE
-				/* adjust for FCoE Sequence Offload */
-				if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
-				    && (skb->protocol == htons(ETH_P_FCOE)) &&
-				    skb_is_gso(skb)) {
-					hlen = skb_transport_offset(skb) +
-						sizeof(struct fc_frame_header) +
-						sizeof(struct fcoe_crc_eof);
-					segs = DIV_ROUND_UP(skb->len - hlen,
-						skb_shinfo(skb)->gso_size);
-				}
-#endif /* IXGBE_FCOE */
-				/* multiply data chunks by size of headers */
-				bytecount = ((segs - 1) * hlen) + skb->len;
-				total_packets += segs;
-				total_bytes += bytecount;
-			}
-
-			ixgbe_unmap_and_free_tx_resource(adapter,
-							 tx_buffer_info);
 
 			tx_desc->wb.status = 0;
+			cleaned = (i == eop);
 
 			i++;
 			if (i == tx_ring->count)
 				i = 0;
+
+			if (cleaned && tx_buffer_info->skb) {
+				total_bytes += tx_buffer_info->bytecount;
+				total_packets += tx_buffer_info->gso_segs;
+			}
+
+			ixgbe_unmap_and_free_tx_resource(tx_ring,
+							 tx_buffer_info);
 		}
 
+		tx_ring->tx_stats.completed++;
 		eop = tx_ring->tx_buffer_info[i].next_to_watch;
 		eop_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
 	}
 
 	tx_ring->next_to_clean = i;
+	tx_ring->total_bytes += total_bytes;
+	tx_ring->total_packets += total_packets;
+	u64_stats_update_begin(&tx_ring->syncp);
+	tx_ring->stats.packets += total_packets;
+	tx_ring->stats.bytes += total_bytes;
+	u64_stats_update_end(&tx_ring->syncp);
+
+	if (check_for_tx_hang(tx_ring) && ixgbe_check_tx_hang(tx_ring)) {
+		/* schedule immediate reset if we believe we hung */
+		struct ixgbe_hw *hw = &adapter->hw;
+		tx_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
+		e_err(drv, "Detected Tx Unit Hang\n"
+			"  Tx Queue             <%d>\n"
+			"  TDH, TDT             <%x>, <%x>\n"
+			"  next_to_use          <%x>\n"
+			"  next_to_clean        <%x>\n"
+			"tx_buffer_info[next_to_clean]\n"
+			"  time_stamp           <%lx>\n"
+			"  jiffies              <%lx>\n",
+			tx_ring->queue_index,
+			IXGBE_READ_REG(hw, IXGBE_TDH(tx_ring->reg_idx)),
+			IXGBE_READ_REG(hw, IXGBE_TDT(tx_ring->reg_idx)),
+			tx_ring->next_to_use, eop,
+			tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
+
+		netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
+
+		e_info(probe,
+		       "tx hang %d detected on queue %d, resetting adapter\n",
+			adapter->tx_timeout_count + 1, tx_ring->queue_index);
+
+		/* schedule immediate reset if we believe we hung */
+		ixgbe_tx_timeout(adapter->netdev);
+
+		/* the adapter is about to reset, no point in enabling stuff */
+		return true;
+	}
 
 #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
-	if (unlikely(count && netif_carrier_ok(netdev) &&
+	if (unlikely(count && netif_carrier_ok(tx_ring->netdev) &&
 		     (IXGBE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
 		/* Make sure that anybody stopping the queue after this
 		 * sees the new next_to_clean.
 		 */
 		smp_mb();
-		if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
+		if (__netif_subqueue_stopped(tx_ring->netdev, tx_ring->queue_index) &&
 		    !test_bit(__IXGBE_DOWN, &adapter->state)) {
-			netif_wake_subqueue(netdev, tx_ring->queue_index);
-			++tx_ring->restart_queue;
+			netif_wake_subqueue(tx_ring->netdev, tx_ring->queue_index);
+			++tx_ring->tx_stats.restart_queue;
 		}
 	}
 
-	if (adapter->detect_tx_hung) {
-		if (ixgbe_check_tx_hang(adapter, tx_ring, i)) {
-			/* schedule immediate reset if we believe we hung */
-			e_info(probe, "tx hang %d detected, resetting "
-			       "adapter\n", adapter->tx_timeout_count + 1);
-			ixgbe_tx_timeout(adapter->netdev);
-		}
-	}
-
-	/* re-arm the interrupt */
-	if (count >= tx_ring->work_limit)
-		ixgbe_irq_rearm_queues(adapter, ((u64)1 << q_vector->v_idx));
-
-	tx_ring->total_bytes += total_bytes;
-	tx_ring->total_packets += total_packets;
-	u64_stats_update_begin(&tx_ring->syncp);
-	tx_ring->stats.packets += total_packets;
-	tx_ring->stats.bytes += total_bytes;
-	u64_stats_update_end(&tx_ring->syncp);
 	return count < tx_ring->work_limit;
 }
 
 #ifdef CONFIG_IXGBE_DCA
 static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
-				struct ixgbe_ring *rx_ring)
+				struct ixgbe_ring *rx_ring,
+				int cpu)
 {
+	struct ixgbe_hw *hw = &adapter->hw;
 	u32 rxctrl;
-	int cpu = get_cpu();
-	int q = rx_ring->reg_idx;
-
-	if (rx_ring->cpu != cpu) {
-		rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q));
-		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
-			rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK;
-			rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
-		} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-			rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK_82599;
-			rxctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
-				   IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599);
-		}
-		rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
-		rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
-		rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
-		rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
-			    IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl);
-		rx_ring->cpu = cpu;
+	u8 reg_idx = rx_ring->reg_idx;
+
+	rxctrl = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(reg_idx));
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK;
+		rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK_82599;
+		rxctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
+			   IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599);
+		break;
+	default:
+		break;
 	}
-	put_cpu();
+	rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
+	rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
+	rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
+	rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+		    IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+	IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl);
 }
 
 static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
-				struct ixgbe_ring *tx_ring)
+				struct ixgbe_ring *tx_ring,
+				int cpu)
 {
+	struct ixgbe_hw *hw = &adapter->hw;
 	u32 txctrl;
+	u8 reg_idx = tx_ring->reg_idx;
+
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(reg_idx));
+		txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
+		txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+		txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+		txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(reg_idx), txctrl);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx));
+		txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599;
+		txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
+			   IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+		txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+		txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx), txctrl);
+		break;
+	default:
+		break;
+	}
+}
+
+static void ixgbe_update_dca(struct ixgbe_q_vector *q_vector)
+{
+	struct ixgbe_adapter *adapter = q_vector->adapter;
 	int cpu = get_cpu();
-	int q = tx_ring->reg_idx;
-	struct ixgbe_hw *hw = &adapter->hw;
+	long r_idx;
+	int i;
 
-	if (tx_ring->cpu != cpu) {
-		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
-			txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q));
-			txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
-			txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
-			txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
-			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl);
-		} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-			txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q));
-			txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599;
-			txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
-				  IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
-			txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
-			IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl);
-		}
-		tx_ring->cpu = cpu;
+	if (q_vector->cpu == cpu)
+		goto out_no_update;
+
+	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+	for (i = 0; i < q_vector->txr_count; i++) {
+		ixgbe_update_tx_dca(adapter, adapter->tx_ring[r_idx], cpu);
+		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+				      r_idx + 1);
+	}
+
+	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+	for (i = 0; i < q_vector->rxr_count; i++) {
+		ixgbe_update_rx_dca(adapter, adapter->rx_ring[r_idx], cpu);
+		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
+				      r_idx + 1);
 	}
+
+	q_vector->cpu = cpu;
+out_no_update:
 	put_cpu();
 }
 
 static void ixgbe_setup_dca(struct ixgbe_adapter *adapter)
 {
+	int num_q_vectors;
 	int i;
 
 	if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
@@ -898,22 +1019,25 @@ static void ixgbe_setup_dca(struct ixgbe_adapter *adapter)
 	/* always use CB2 mode, difference is masked in the CB driver */
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
 
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		adapter->tx_ring[i]->cpu = -1;
-		ixgbe_update_tx_dca(adapter, adapter->tx_ring[i]);
-	}
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		adapter->rx_ring[i]->cpu = -1;
-		ixgbe_update_rx_dca(adapter, adapter->rx_ring[i]);
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+		num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+	else
+		num_q_vectors = 1;
+
+	for (i = 0; i < num_q_vectors; i++) {
+		adapter->q_vector[i]->cpu = -1;
+		ixgbe_update_dca(adapter->q_vector[i]);
 	}
 }
 
 static int __ixgbe_notify_dca(struct device *dev, void *data)
 {
-	struct net_device *netdev = dev_get_drvdata(dev);
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_adapter *adapter = dev_get_drvdata(dev);
 	unsigned long event = *(unsigned long *)data;
 
+	if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
+		return 0;
+
 	switch (event) {
 	case DCA_PROVIDER_ADD:
 		/* if we're already enabled, don't do it again */
@@ -1012,8 +1136,7 @@ static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 }
 
-static inline void ixgbe_release_rx_desc(struct ixgbe_hw *hw,
-					 struct ixgbe_ring *rx_ring, u32 val)
+static inline void ixgbe_release_rx_desc(struct ixgbe_ring *rx_ring, u32 val)
 {
 	/*
 	 * Force memory writes to complete before letting h/w
@@ -1022,72 +1145,81 @@ static inline void ixgbe_release_rx_desc(struct ixgbe_hw *hw,
 	 * such as IA-64).
 	 */
 	wmb();
-	IXGBE_WRITE_REG(hw, IXGBE_RDT(rx_ring->reg_idx), val);
+	writel(val, rx_ring->tail);
 }
 
 /**
  * ixgbe_alloc_rx_buffers - Replace used receive buffers; packet split
- * @adapter: address of board private structure
+ * @rx_ring: ring to place buffers on
+ * @cleaned_count: number of buffers to replace
  **/
-void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
-			    struct ixgbe_ring *rx_ring,
-			    int cleaned_count)
+void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count)
 {
-	struct net_device *netdev = adapter->netdev;
-	struct pci_dev *pdev = adapter->pdev;
 	union ixgbe_adv_rx_desc *rx_desc;
 	struct ixgbe_rx_buffer *bi;
-	unsigned int i;
-	unsigned int bufsz = rx_ring->rx_buf_len;
+	struct sk_buff *skb;
+	u16 i = rx_ring->next_to_use;
 
-	i = rx_ring->next_to_use;
-	bi = &rx_ring->rx_buffer_info[i];
+	/* do nothing if no valid netdev defined */
+	if (!rx_ring->netdev)
+		return;
 
 	while (cleaned_count--) {
 		rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i);
+		bi = &rx_ring->rx_buffer_info[i];
+		skb = bi->skb;
 
-		if (!bi->page_dma &&
-		    (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)) {
-			if (!bi->page) {
-				bi->page = netdev_alloc_page(netdev);
-				if (!bi->page) {
-					adapter->alloc_rx_page_failed++;
-					goto no_buffers;
-				}
-				bi->page_offset = 0;
-			} else {
-				/* use a half page if we're re-using */
-				bi->page_offset ^= (PAGE_SIZE / 2);
-			}
-
-			bi->page_dma = dma_map_page(&pdev->dev, bi->page,
-						    bi->page_offset,
-						    (PAGE_SIZE / 2),
-						    DMA_FROM_DEVICE);
-		}
-
-		if (!bi->skb) {
-			struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev,
-									bufsz);
-			bi->skb = skb;
-
+		if (!skb) {
+			skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
+							rx_ring->rx_buf_len);
 			if (!skb) {
-				adapter->alloc_rx_buff_failed++;
+				rx_ring->rx_stats.alloc_rx_buff_failed++;
 				goto no_buffers;
 			}
 			/* initialize queue mapping */
 			skb_record_rx_queue(skb, rx_ring->queue_index);
+			bi->skb = skb;
 		}
 
 		if (!bi->dma) {
-			bi->dma = dma_map_single(&pdev->dev,
-						 bi->skb->data,
+			bi->dma = dma_map_single(rx_ring->dev,
+						 skb->data,
 						 rx_ring->rx_buf_len,
 						 DMA_FROM_DEVICE);
+			if (dma_mapping_error(rx_ring->dev, bi->dma)) {
+				rx_ring->rx_stats.alloc_rx_buff_failed++;
+				bi->dma = 0;
+				goto no_buffers;
+			}
 		}
-		/* Refresh the desc even if buffer_addrs didn't change because
-		 * each write-back erases this info. */
-		if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
+
+		if (ring_is_ps_enabled(rx_ring)) {
+			if (!bi->page) {
+				bi->page = netdev_alloc_page(rx_ring->netdev);
+				if (!bi->page) {
+					rx_ring->rx_stats.alloc_rx_page_failed++;
+					goto no_buffers;
+				}
+			}
+
+			if (!bi->page_dma) {
+				/* use a half page if we're re-using */
+				bi->page_offset ^= PAGE_SIZE / 2;
+				bi->page_dma = dma_map_page(rx_ring->dev,
+							    bi->page,
+							    bi->page_offset,
+							    PAGE_SIZE / 2,
+							    DMA_FROM_DEVICE);
+				if (dma_mapping_error(rx_ring->dev,
+						      bi->page_dma)) {
+					rx_ring->rx_stats.alloc_rx_page_failed++;
+					bi->page_dma = 0;
+					goto no_buffers;
+				}
+			}
+
+			/* Refresh the desc even if buffer_addrs didn't change
+			 * because each write-back erases this info. */
 			rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
 			rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
 		} else {
@@ -1098,56 +1230,48 @@ void ixgbe_alloc_rx_buffers(struct ixgbe_adapter *adapter,
 		i++;
 		if (i == rx_ring->count)
 			i = 0;
-		bi = &rx_ring->rx_buffer_info[i];
 	}
 
 no_buffers:
 	if (rx_ring->next_to_use != i) {
 		rx_ring->next_to_use = i;
-		if (i-- == 0)
-			i = (rx_ring->count - 1);
-
-		ixgbe_release_rx_desc(&adapter->hw, rx_ring, i);
+		ixgbe_release_rx_desc(rx_ring, i);
 	}
 }
 
-static inline u16 ixgbe_get_hdr_info(union ixgbe_adv_rx_desc *rx_desc)
-{
-	return rx_desc->wb.lower.lo_dword.hs_rss.hdr_info;
-}
-
-static inline u16 ixgbe_get_pkt_info(union ixgbe_adv_rx_desc *rx_desc)
+static inline u16 ixgbe_get_hlen(union ixgbe_adv_rx_desc *rx_desc)
 {
-	return rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
-}
-
-static inline u32 ixgbe_get_rsc_count(union ixgbe_adv_rx_desc *rx_desc)
-{
-	return (le32_to_cpu(rx_desc->wb.lower.lo_dword.data) &
-		IXGBE_RXDADV_RSCCNT_MASK) >>
-		IXGBE_RXDADV_RSCCNT_SHIFT;
+	/* HW will not DMA in data larger than the given buffer, even if it
+	 * parses the (NFS, of course) header to be larger.  In that case, it
+	 * fills the header buffer and spills the rest into the page.
+	 */
+	u16 hdr_info = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info);
+	u16 hlen = (hdr_info &  IXGBE_RXDADV_HDRBUFLEN_MASK) >>
+		    IXGBE_RXDADV_HDRBUFLEN_SHIFT;
+	if (hlen > IXGBE_RX_HDR_SIZE)
+		hlen = IXGBE_RX_HDR_SIZE;
+	return hlen;
 }
 
 /**
  * ixgbe_transform_rsc_queue - change rsc queue into a full packet
  * @skb: pointer to the last skb in the rsc queue
- * @count: pointer to number of packets coalesced in this context
  *
  * This function changes a queue full of hw rsc buffers into a completed
  * packet.  It uses the ->prev pointers to find the first packet and then
  * turns it into the frag list owner.
  **/
-static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb,
-							u64 *count)
+static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb)
 {
 	unsigned int frag_list_size = 0;
+	unsigned int skb_cnt = 1;
 
 	while (skb->prev) {
 		struct sk_buff *prev = skb->prev;
 		frag_list_size += skb->len;
 		skb->prev = NULL;
 		skb = prev;
-		*count += 1;
+		skb_cnt++;
 	}
 
 	skb_shinfo(skb)->frag_list = skb->next;
@@ -1155,68 +1279,59 @@ static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb,
 	skb->len += frag_list_size;
 	skb->data_len += frag_list_size;
 	skb->truesize += frag_list_size;
+	IXGBE_RSC_CB(skb)->skb_cnt = skb_cnt;
+
 	return skb;
 }
 
-struct ixgbe_rsc_cb {
-	dma_addr_t dma;
-	bool delay_unmap;
-};
-
-#define IXGBE_RSC_CB(skb) ((struct ixgbe_rsc_cb *)(skb)->cb)
+static inline bool ixgbe_get_rsc_state(union ixgbe_adv_rx_desc *rx_desc)
+{
+	return !!(le32_to_cpu(rx_desc->wb.lower.lo_dword.data) &
+		IXGBE_RXDADV_RSCCNT_MASK);
+}
 
-static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
+static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 			       struct ixgbe_ring *rx_ring,
 			       int *work_done, int work_to_do)
 {
 	struct ixgbe_adapter *adapter = q_vector->adapter;
-	struct pci_dev *pdev = adapter->pdev;
 	union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
 	struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer;
 	struct sk_buff *skb;
-	unsigned int i, rsc_count = 0;
-	u32 len, staterr;
-	u16 hdr_info;
-	bool cleaned = false;
-	int cleaned_count = 0;
 	unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+	const int current_node = numa_node_id();
 #ifdef IXGBE_FCOE
 	int ddp_bytes = 0;
 #endif /* IXGBE_FCOE */
+	u32 staterr;
+	u16 i;
+	u16 cleaned_count = 0;
+	bool pkt_is_rsc = false;
 
 	i = rx_ring->next_to_clean;
 	rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i);
 	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
-	rx_buffer_info = &rx_ring->rx_buffer_info[i];
 
 	while (staterr & IXGBE_RXD_STAT_DD) {
 		u32 upper_len = 0;
-		if (*work_done >= work_to_do)
-			break;
-		(*work_done)++;
 
 		rmb(); /* read descriptor and rx_buffer_info after status DD */
-		if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
-			hdr_info = le16_to_cpu(ixgbe_get_hdr_info(rx_desc));
-			len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
-			       IXGBE_RXDADV_HDRBUFLEN_SHIFT;
-			upper_len = le16_to_cpu(rx_desc->wb.upper.length);
-			if ((len > IXGBE_RX_HDR_SIZE) ||
-			    (upper_len && !(hdr_info & IXGBE_RXDADV_SPH)))
-				len = IXGBE_RX_HDR_SIZE;
-		} else {
-			len = le16_to_cpu(rx_desc->wb.upper.length);
-		}
 
-		cleaned = true;
+		rx_buffer_info = &rx_ring->rx_buffer_info[i];
+
 		skb = rx_buffer_info->skb;
-		prefetch(skb->data);
 		rx_buffer_info->skb = NULL;
+		prefetch(skb->data);
+
+		if (ring_is_rsc_enabled(rx_ring))
+			pkt_is_rsc = ixgbe_get_rsc_state(rx_desc);
 
+		/* if this is a skb from previous receive DMA will be 0 */
 		if (rx_buffer_info->dma) {
-			if ((adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
-			    (!(staterr & IXGBE_RXD_STAT_EOP)) &&
-				 (!(skb->prev))) {
+			u16 hlen;
+			if (pkt_is_rsc &&
+			    !(staterr & IXGBE_RXD_STAT_EOP) &&
+			    !skb->prev) {
 				/*
 				 * When HWRSC is enabled, delay unmapping
 				 * of the first packet. It carries the
@@ -1227,29 +1342,42 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 				IXGBE_RSC_CB(skb)->delay_unmap = true;
 				IXGBE_RSC_CB(skb)->dma = rx_buffer_info->dma;
 			} else {
-				dma_unmap_single(&pdev->dev,
+				dma_unmap_single(rx_ring->dev,
 						 rx_buffer_info->dma,
 						 rx_ring->rx_buf_len,
 						 DMA_FROM_DEVICE);
 			}
 			rx_buffer_info->dma = 0;
-			skb_put(skb, len);
+
+			if (ring_is_ps_enabled(rx_ring)) {
+				hlen = ixgbe_get_hlen(rx_desc);
+				upper_len = le16_to_cpu(rx_desc->wb.upper.length);
+			} else {
+				hlen = le16_to_cpu(rx_desc->wb.upper.length);
+			}
+
+			skb_put(skb, hlen);
+		} else {
+			/* assume packet split since header is unmapped */
+			upper_len = le16_to_cpu(rx_desc->wb.upper.length);
 		}
 
 		if (upper_len) {
-			dma_unmap_page(&pdev->dev, rx_buffer_info->page_dma,
-				       PAGE_SIZE / 2, DMA_FROM_DEVICE);
+			dma_unmap_page(rx_ring->dev,
+				       rx_buffer_info->page_dma,
+				       PAGE_SIZE / 2,
+				       DMA_FROM_DEVICE);
 			rx_buffer_info->page_dma = 0;
 			skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
 					   rx_buffer_info->page,
 					   rx_buffer_info->page_offset,
 					   upper_len);
 
-			if ((rx_ring->rx_buf_len > (PAGE_SIZE / 2)) ||
-			    (page_count(rx_buffer_info->page) != 1))
-				rx_buffer_info->page = NULL;
-			else
+			if ((page_count(rx_buffer_info->page) == 1) &&
+			    (page_to_nid(rx_buffer_info->page) == current_node))
 				get_page(rx_buffer_info->page);
+			else
+				rx_buffer_info->page = NULL;
 
 			skb->len += upper_len;
 			skb->data_len += upper_len;
@@ -1264,10 +1392,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		prefetch(next_rxd);
 		cleaned_count++;
 
-		if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
-			rsc_count = ixgbe_get_rsc_count(rx_desc);
-
-		if (rsc_count) {
+		if (pkt_is_rsc) {
 			u32 nextp = (staterr & IXGBE_RXDADV_NEXTP_MASK) >>
 				     IXGBE_RXDADV_NEXTP_SHIFT;
 			next_buffer = &rx_ring->rx_buffer_info[nextp];
@@ -1275,32 +1400,8 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 			next_buffer = &rx_ring->rx_buffer_info[i];
 		}
 
-		if (staterr & IXGBE_RXD_STAT_EOP) {
-			if (skb->prev)
-				skb = ixgbe_transform_rsc_queue(skb,
-								&(rx_ring->rsc_count));
-			if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
-				if (IXGBE_RSC_CB(skb)->delay_unmap) {
-					dma_unmap_single(&pdev->dev,
-							 IXGBE_RSC_CB(skb)->dma,
-							 rx_ring->rx_buf_len,
-							 DMA_FROM_DEVICE);
-					IXGBE_RSC_CB(skb)->dma = 0;
-					IXGBE_RSC_CB(skb)->delay_unmap = false;
-				}
-				if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED)
-					rx_ring->rsc_count +=
-						skb_shinfo(skb)->nr_frags;
-				else
-					rx_ring->rsc_count++;
-				rx_ring->rsc_flush++;
-			}
-			u64_stats_update_begin(&rx_ring->syncp);
-			rx_ring->stats.packets++;
-			rx_ring->stats.bytes += skb->len;
-			u64_stats_update_end(&rx_ring->syncp);
-		} else {
-			if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
+		if (!(staterr & IXGBE_RXD_STAT_EOP)) {
+			if (ring_is_ps_enabled(rx_ring)) {
 				rx_buffer_info->skb = next_buffer->skb;
 				rx_buffer_info->dma = next_buffer->dma;
 				next_buffer->skb = skb;
@@ -1309,12 +1410,45 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 				skb->next = next_buffer->skb;
 				skb->next->prev = skb;
 			}
-			rx_ring->non_eop_descs++;
+			rx_ring->rx_stats.non_eop_descs++;
 			goto next_desc;
 		}
 
+		if (skb->prev) {
+			skb = ixgbe_transform_rsc_queue(skb);
+			/* if we got here without RSC the packet is invalid */
+			if (!pkt_is_rsc) {
+				__pskb_trim(skb, 0);
+				rx_buffer_info->skb = skb;
+				goto next_desc;
+			}
+		}
+
+		if (ring_is_rsc_enabled(rx_ring)) {
+			if (IXGBE_RSC_CB(skb)->delay_unmap) {
+				dma_unmap_single(rx_ring->dev,
+						 IXGBE_RSC_CB(skb)->dma,
+						 rx_ring->rx_buf_len,
+						 DMA_FROM_DEVICE);
+				IXGBE_RSC_CB(skb)->dma = 0;
+				IXGBE_RSC_CB(skb)->delay_unmap = false;
+			}
+		}
+		if (pkt_is_rsc) {
+			if (ring_is_ps_enabled(rx_ring))
+				rx_ring->rx_stats.rsc_count +=
+					skb_shinfo(skb)->nr_frags;
+			else
+				rx_ring->rx_stats.rsc_count +=
+					IXGBE_RSC_CB(skb)->skb_cnt;
+			rx_ring->rx_stats.rsc_flush++;
+		}
+
+		/* ERR_MASK will only have valid bits if EOP set */
 		if (staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK) {
-			dev_kfree_skb_irq(skb);
+			/* trim packet back to size 0 and recycle it */
+			__pskb_trim(skb, 0);
+			rx_buffer_info->skb = skb;
 			goto next_desc;
 		}
 
@@ -1324,7 +1458,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		total_rx_bytes += skb->len;
 		total_rx_packets++;
 
-		skb->protocol = eth_type_trans(skb, adapter->netdev);
+		skb->protocol = eth_type_trans(skb, rx_ring->netdev);
 #ifdef IXGBE_FCOE
 		/* if ddp, not passing to ULD unless for FCP_RSP or error */
 		if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
@@ -1338,16 +1472,18 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 next_desc:
 		rx_desc->wb.upper.status_error = 0;
 
+		(*work_done)++;
+		if (*work_done >= work_to_do)
+			break;
+
 		/* return some buffers to hardware, one at a time is too slow */
 		if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) {
-			ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
+			ixgbe_alloc_rx_buffers(rx_ring, cleaned_count);
 			cleaned_count = 0;
 		}
 
 		/* use prefetched values */
 		rx_desc = next_rxd;
-		rx_buffer_info = &rx_ring->rx_buffer_info[i];
-
 		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
 	}
 
@@ -1355,14 +1491,14 @@ next_desc:
 	cleaned_count = IXGBE_DESC_UNUSED(rx_ring);
 
 	if (cleaned_count)
-		ixgbe_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
+		ixgbe_alloc_rx_buffers(rx_ring, cleaned_count);
 
 #ifdef IXGBE_FCOE
 	/* include DDPed FCoE data */
 	if (ddp_bytes > 0) {
 		unsigned int mss;
 
-		mss = adapter->netdev->mtu - sizeof(struct fcoe_hdr) -
+		mss = rx_ring->netdev->mtu - sizeof(struct fcoe_hdr) -
 			sizeof(struct fc_frame_header) -
 			sizeof(struct fcoe_crc_eof);
 		if (mss > 512)
@@ -1374,8 +1510,10 @@ next_desc:
 
 	rx_ring->total_packets += total_rx_packets;
 	rx_ring->total_bytes += total_rx_bytes;
-
-	return cleaned;
+	u64_stats_update_begin(&rx_ring->syncp);
+	rx_ring->stats.packets += total_rx_packets;
+	rx_ring->stats.bytes += total_rx_bytes;
+	u64_stats_update_end(&rx_ring->syncp);
 }
 
 static int ixgbe_clean_rxonly(struct napi_struct *, int);
@@ -1389,7 +1527,7 @@ static int ixgbe_clean_rxonly(struct napi_struct *, int);
 static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_q_vector *q_vector;
-	int i, j, q_vectors, v_idx, r_idx;
+	int i, q_vectors, v_idx, r_idx;
 	u32 mask;
 
 	q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
@@ -1405,8 +1543,8 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 				       adapter->num_rx_queues);
 
 		for (i = 0; i < q_vector->rxr_count; i++) {
-			j = adapter->rx_ring[r_idx]->reg_idx;
-			ixgbe_set_ivar(adapter, 0, j, v_idx);
+			u8 reg_idx = adapter->rx_ring[r_idx]->reg_idx;
+			ixgbe_set_ivar(adapter, 0, reg_idx, v_idx);
 			r_idx = find_next_bit(q_vector->rxr_idx,
 					      adapter->num_rx_queues,
 					      r_idx + 1);
@@ -1415,8 +1553,8 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 				       adapter->num_tx_queues);
 
 		for (i = 0; i < q_vector->txr_count; i++) {
-			j = adapter->tx_ring[r_idx]->reg_idx;
-			ixgbe_set_ivar(adapter, 1, j, v_idx);
+			u8 reg_idx = adapter->tx_ring[r_idx]->reg_idx;
+			ixgbe_set_ivar(adapter, 1, reg_idx, v_idx);
 			r_idx = find_next_bit(q_vector->txr_idx,
 					      adapter->num_tx_queues,
 					      r_idx + 1);
@@ -1447,11 +1585,19 @@ static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
 		}
 	}
 
-	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
 		ixgbe_set_ivar(adapter, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX,
 			       v_idx);
-	else if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		ixgbe_set_ivar(adapter, -1, 1, v_idx);
+		break;
+
+	default:
+		break;
+	}
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950);
 
 	/* set up to autoclear timer, and the vectors */
@@ -1547,12 +1693,15 @@ void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
 	int v_idx = q_vector->v_idx;
 	u32 itr_reg = EITR_INTS_PER_SEC_TO_REG(q_vector->eitr);
 
-	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
 		/* must write high and low 16 bits to reset counter */
 		itr_reg |= (itr_reg << 16);
-	} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		/*
-		 * 82599 can support a value of zero, so allow it for
+		 * 82599 and X540 can support a value of zero, so allow it for
 		 * max interrupt rate, but there is an errata where it can
 		 * not be zero with RSC
 		 */
@@ -1565,6 +1714,9 @@ void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
 		 * immediate assertion of the interrupt
 		 */
 		itr_reg |= IXGBE_EITR_CNT_WDIS;
+		break;
+	default:
+		break;
 	}
 	IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg);
 }
@@ -1572,14 +1724,13 @@ void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
 static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
 {
 	struct ixgbe_adapter *adapter = q_vector->adapter;
+	int i, r_idx;
 	u32 new_itr;
 	u8 current_itr, ret_itr;
-	int i, r_idx;
-	struct ixgbe_ring *rx_ring, *tx_ring;
 
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
 	for (i = 0; i < q_vector->txr_count; i++) {
-		tx_ring = adapter->tx_ring[r_idx];
+		struct ixgbe_ring *tx_ring = adapter->tx_ring[r_idx];
 		ret_itr = ixgbe_update_itr(adapter, q_vector->eitr,
 					   q_vector->tx_itr,
 					   tx_ring->total_packets,
@@ -1594,7 +1745,7 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
 
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
 	for (i = 0; i < q_vector->rxr_count; i++) {
-		rx_ring = adapter->rx_ring[r_idx];
+		struct ixgbe_ring *rx_ring = adapter->rx_ring[r_idx];
 		ret_itr = ixgbe_update_itr(adapter, q_vector->eitr,
 					   q_vector->rx_itr,
 					   rx_ring->total_packets,
@@ -1625,7 +1776,7 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector)
 
 	if (new_itr != q_vector->eitr) {
 		/* do an exponential smoothing */
-		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
+		new_itr = ((q_vector->eitr * 9) + new_itr)/10;
 
 		/* save the algorithm value here, not the smoothed one */
 		q_vector->eitr = new_itr;
@@ -1693,17 +1844,18 @@ static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 
+	if (eicr & IXGBE_EICR_GPI_SDP2) {
+		/* Clear the interrupt */
+		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2);
+		if (!test_bit(__IXGBE_DOWN, &adapter->state))
+			schedule_work(&adapter->sfp_config_module_task);
+	}
+
 	if (eicr & IXGBE_EICR_GPI_SDP1) {
 		/* Clear the interrupt */
 		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
-		schedule_work(&adapter->multispeed_fiber_task);
-	} else if (eicr & IXGBE_EICR_GPI_SDP2) {
-		/* Clear the interrupt */
-		IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2);
-		schedule_work(&adapter->sfp_config_module_task);
-	} else {
-		/* Interrupt isn't for us... */
-		return;
+		if (!test_bit(__IXGBE_DOWN, &adapter->state))
+			schedule_work(&adapter->multispeed_fiber_task);
 	}
 }
 
@@ -1743,16 +1895,16 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
 	if (eicr & IXGBE_EICR_MAILBOX)
 		ixgbe_msg_task(adapter);
 
-	if (hw->mac.type == ixgbe_mac_82598EB)
-		ixgbe_check_fan_failure(adapter, eicr);
-
-	if (hw->mac.type == ixgbe_mac_82599EB) {
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
 		ixgbe_check_sfp_event(adapter, eicr);
-		adapter->interrupt_event = eicr;
 		if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
-		    ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC)))
+		    ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
+			adapter->interrupt_event = eicr;
 			schedule_work(&adapter->check_overtemp_task);
-
+		}
+		/* now fallthrough to handle Flow Director */
+	case ixgbe_mac_X540:
 		/* Handle Flow Director Full threshold interrupt */
 		if (eicr & IXGBE_EICR_FLOW_DIR) {
 			int i;
@@ -1762,12 +1914,18 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
 			for (i = 0; i < adapter->num_tx_queues; i++) {
 				struct ixgbe_ring *tx_ring =
 							    adapter->tx_ring[i];
-				if (test_and_clear_bit(__IXGBE_FDIR_INIT_DONE,
-						       &tx_ring->reinit_state))
+				if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE,
+						       &tx_ring->state))
 					schedule_work(&adapter->fdir_reinit_task);
 			}
 		}
+		break;
+	default:
+		break;
 	}
+
+	ixgbe_check_fan_failure(adapter, eicr);
+
 	if (!test_bit(__IXGBE_DOWN, &adapter->state))
 		IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
 
@@ -1778,15 +1936,24 @@ static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter,
 					   u64 qmask)
 {
 	u32 mask;
+	struct ixgbe_hw *hw = &adapter->hw;
 
-	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
 		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
-	} else {
+		IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		mask = (qmask & 0xFFFFFFFF);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(0), mask);
+		if (mask)
+			IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask);
 		mask = (qmask >> 32);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS_EX(1), mask);
+		if (mask)
+			IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
+		break;
+	default:
+		break;
 	}
 	/* skip the flush */
 }
@@ -1795,15 +1962,24 @@ static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter,
 					    u64 qmask)
 {
 	u32 mask;
+	struct ixgbe_hw *hw = &adapter->hw;
 
-	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
 		mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, mask);
-	} else {
+		IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		mask = (qmask & 0xFFFFFFFF);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), mask);
+		if (mask)
+			IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask);
 		mask = (qmask >> 32);
-		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), mask);
+		if (mask)
+			IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask);
+		break;
+	default:
+		break;
 	}
 	/* skip the flush */
 }
@@ -1846,8 +2022,13 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
 	int r_idx;
 	int i;
 
+#ifdef CONFIG_IXGBE_DCA
+	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+		ixgbe_update_dca(q_vector);
+#endif
+
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
-	for (i = 0;  i < q_vector->rxr_count; i++) {
+	for (i = 0; i < q_vector->rxr_count; i++) {
 		rx_ring = adapter->rx_ring[r_idx];
 		rx_ring->total_bytes = 0;
 		rx_ring->total_packets = 0;
@@ -1858,7 +2039,6 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
 	if (!q_vector->rxr_count)
 		return IRQ_HANDLED;
 
-	/* disable interrupts on this vector only */
 	/* EIAM disabled interrupts (on this vector) for us */
 	napi_schedule(&q_vector->napi);
 
@@ -1917,13 +2097,14 @@ static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
 	int work_done = 0;
 	long r_idx;
 
-	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
-	rx_ring = adapter->rx_ring[r_idx];
 #ifdef CONFIG_IXGBE_DCA
 	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
-		ixgbe_update_rx_dca(adapter, rx_ring);
+		ixgbe_update_dca(q_vector);
 #endif
 
+	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+	rx_ring = adapter->rx_ring[r_idx];
+
 	ixgbe_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
 
 	/* If all Rx work done, exit the polling mode */
@@ -1957,13 +2138,14 @@ static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
 	long r_idx;
 	bool tx_clean_complete = true;
 
+#ifdef CONFIG_IXGBE_DCA
+	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+		ixgbe_update_dca(q_vector);
+#endif
+
 	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
 	for (i = 0; i < q_vector->txr_count; i++) {
 		ring = adapter->tx_ring[r_idx];
-#ifdef CONFIG_IXGBE_DCA
-		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
-			ixgbe_update_tx_dca(adapter, ring);
-#endif
 		tx_clean_complete &= ixgbe_clean_tx_irq(q_vector, ring);
 		r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
 				      r_idx + 1);
@@ -1976,10 +2158,6 @@ static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
 	r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
 	for (i = 0; i < q_vector->rxr_count; i++) {
 		ring = adapter->rx_ring[r_idx];
-#ifdef CONFIG_IXGBE_DCA
-		if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
-			ixgbe_update_rx_dca(adapter, ring);
-#endif
 		ixgbe_clean_rx_irq(q_vector, ring, &work_done, budget);
 		r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
 				      r_idx + 1);
@@ -2018,13 +2196,14 @@ static int ixgbe_clean_txonly(struct napi_struct *napi, int budget)
 	int work_done = 0;
 	long r_idx;
 
-	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
-	tx_ring = adapter->tx_ring[r_idx];
 #ifdef CONFIG_IXGBE_DCA
 	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
-		ixgbe_update_tx_dca(adapter, tx_ring);
+		ixgbe_update_dca(q_vector);
 #endif
 
+	r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+	tx_ring = adapter->tx_ring[r_idx];
+
 	if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
 		work_done = budget;
 
@@ -2045,24 +2224,27 @@ static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx,
 				     int r_idx)
 {
 	struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
+	struct ixgbe_ring *rx_ring = a->rx_ring[r_idx];
 
 	set_bit(r_idx, q_vector->rxr_idx);
 	q_vector->rxr_count++;
+	rx_ring->q_vector = q_vector;
 }
 
 static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx,
 				     int t_idx)
 {
 	struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
+	struct ixgbe_ring *tx_ring = a->tx_ring[t_idx];
 
 	set_bit(t_idx, q_vector->txr_idx);
 	q_vector->txr_count++;
+	tx_ring->q_vector = q_vector;
 }
 
 /**
  * ixgbe_map_rings_to_vectors - Maps descriptor rings to vectors
  * @adapter: board private structure to initialize
- * @vectors: allotted vector count for descriptor rings
  *
  * This function maps descriptor rings to the queue-specific vectors
  * we were allotted through the MSI-X enabling code.  Ideally, we'd have
@@ -2070,9 +2252,9 @@ static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx,
  * group the rings as "efficiently" as possible.  You would add new
  * mapping configurations in here.
  **/
-static int ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter,
-				      int vectors)
+static int ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter)
 {
+	int q_vectors;
 	int v_start = 0;
 	int rxr_idx = 0, txr_idx = 0;
 	int rxr_remaining = adapter->num_rx_queues;
@@ -2085,11 +2267,13 @@ static int ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter,
 	if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
 		goto out;
 
+	q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
 	/*
 	 * The ideal configuration...
 	 * We have enough vectors to map one per queue.
 	 */
-	if (vectors == adapter->num_rx_queues + adapter->num_tx_queues) {
+	if (q_vectors == adapter->num_rx_queues + adapter->num_tx_queues) {
 		for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++)
 			map_vector_to_rxq(adapter, v_start, rxr_idx);
 
@@ -2105,23 +2289,20 @@ static int ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter,
 	 * multiple queues per vector.
 	 */
 	/* Re-adjusting *qpv takes care of the remainder. */
-	for (i = v_start; i < vectors; i++) {
-		rqpv = DIV_ROUND_UP(rxr_remaining, vectors - i);
+	for (i = v_start; i < q_vectors; i++) {
+		rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - i);
 		for (j = 0; j < rqpv; j++) {
 			map_vector_to_rxq(adapter, i, rxr_idx);
 			rxr_idx++;
 			rxr_remaining--;
 		}
-	}
-	for (i = v_start; i < vectors; i++) {
-		tqpv = DIV_ROUND_UP(txr_remaining, vectors - i);
+		tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - i);
 		for (j = 0; j < tqpv; j++) {
 			map_vector_to_txq(adapter, i, txr_idx);
 			txr_idx++;
 			txr_remaining--;
 		}
 	}
-
 out:
 	return err;
 }
@@ -2143,30 +2324,36 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
 	/* Decrement for Other and TCP Timer vectors */
 	q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
 
-	/* Map the Tx/Rx rings to the vectors we were allotted. */
-	err = ixgbe_map_rings_to_vectors(adapter, q_vectors);
+	err = ixgbe_map_rings_to_vectors(adapter);
 	if (err)
-		goto out;
+		return err;
 
-#define SET_HANDLER(_v) ((!(_v)->rxr_count) ? &ixgbe_msix_clean_tx : \
-			 (!(_v)->txr_count) ? &ixgbe_msix_clean_rx : \
-			 &ixgbe_msix_clean_many)
+#define SET_HANDLER(_v) (((_v)->rxr_count && (_v)->txr_count)        \
+					  ? &ixgbe_msix_clean_many : \
+			  (_v)->rxr_count ? &ixgbe_msix_clean_rx   : \
+			  (_v)->txr_count ? &ixgbe_msix_clean_tx   : \
+			  NULL)
 	for (vector = 0; vector < q_vectors; vector++) {
-		handler = SET_HANDLER(adapter->q_vector[vector]);
+		struct ixgbe_q_vector *q_vector = adapter->q_vector[vector];
+		handler = SET_HANDLER(q_vector);
 
 		if (handler == &ixgbe_msix_clean_rx) {
-			sprintf(adapter->name[vector], "%s-%s-%d",
-				netdev->name, "rx", ri++);
+			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+			         "%s-%s-%d", netdev->name, "rx", ri++);
 		} else if (handler == &ixgbe_msix_clean_tx) {
-			sprintf(adapter->name[vector], "%s-%s-%d",
-				netdev->name, "tx", ti++);
-		} else
-			sprintf(adapter->name[vector], "%s-%s-%d",
-				netdev->name, "TxRx", vector);
-
+			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+			         "%s-%s-%d", netdev->name, "tx", ti++);
+		} else if (handler == &ixgbe_msix_clean_many) {
+			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+			         "%s-%s-%d", netdev->name, "TxRx", ri++);
+			ti++;
+		} else {
+			/* skip this unused q_vector */
+			continue;
+		}
 		err = request_irq(adapter->msix_entries[vector].vector,
-				  handler, 0, adapter->name[vector],
-				  adapter->q_vector[vector]);
+				  handler, 0, q_vector->name,
+				  q_vector);
 		if (err) {
 			e_err(probe, "request_irq failed for MSIX interrupt "
 			      "Error: %d\n", err);
@@ -2174,9 +2361,9 @@ static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
 		}
 	}
 
-	sprintf(adapter->name[vector], "%s:lsc", netdev->name);
+	sprintf(adapter->lsc_int_name, "%s:lsc", netdev->name);
 	err = request_irq(adapter->msix_entries[vector].vector,
-			  ixgbe_msix_lsc, 0, adapter->name[vector], netdev);
+			  ixgbe_msix_lsc, 0, adapter->lsc_int_name, netdev);
 	if (err) {
 		e_err(probe, "request_irq for msix_lsc failed: %d\n", err);
 		goto free_queue_irqs;
@@ -2192,17 +2379,16 @@ free_queue_irqs:
 	pci_disable_msix(adapter->pdev);
 	kfree(adapter->msix_entries);
 	adapter->msix_entries = NULL;
-out:
 	return err;
 }
 
 static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
-	u8 current_itr;
-	u32 new_itr = q_vector->eitr;
 	struct ixgbe_ring *rx_ring = adapter->rx_ring[0];
 	struct ixgbe_ring *tx_ring = adapter->tx_ring[0];
+	u32 new_itr = q_vector->eitr;
+	u8 current_itr;
 
 	q_vector->tx_itr = ixgbe_update_itr(adapter, new_itr,
 					    q_vector->tx_itr,
@@ -2232,9 +2418,9 @@ static void ixgbe_set_itr(struct ixgbe_adapter *adapter)
 
 	if (new_itr != q_vector->eitr) {
 		/* do an exponential smoothing */
-		new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
+		new_itr = ((q_vector->eitr * 9) + new_itr)/10;
 
-		/* save the algorithm value here, not the smoothed one */
+		/* save the algorithm value here */
 		q_vector->eitr = new_itr;
 
 		ixgbe_write_eitr(q_vector);
@@ -2255,12 +2441,17 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
 		mask |= IXGBE_EIMS_GPI_SDP0;
 	if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
 		mask |= IXGBE_EIMS_GPI_SDP1;
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		mask |= IXGBE_EIMS_ECC;
 		mask |= IXGBE_EIMS_GPI_SDP1;
 		mask |= IXGBE_EIMS_GPI_SDP2;
 		if (adapter->num_vfs)
 			mask |= IXGBE_EIMS_MAILBOX;
+		break;
+	default:
+		break;
 	}
 	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
 	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
@@ -2316,13 +2507,20 @@ static irqreturn_t ixgbe_intr(int irq, void *data)
 	if (eicr & IXGBE_EICR_LSC)
 		ixgbe_check_lsc(adapter);
 
-	if (hw->mac.type == ixgbe_mac_82599EB)
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
 		ixgbe_check_sfp_event(adapter, eicr);
+		if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+		    ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
+			adapter->interrupt_event = eicr;
+			schedule_work(&adapter->check_overtemp_task);
+		}
+		break;
+	default:
+		break;
+	}
 
 	ixgbe_check_fan_failure(adapter, eicr);
-	if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
-	    ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC)))
-		schedule_work(&adapter->check_overtemp_task);
 
 	if (napi_schedule_prep(&(q_vector->napi))) {
 		adapter->tx_ring[0]->total_packets = 0;
@@ -2415,14 +2613,20 @@ static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
  **/
 static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
 {
-	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
-	} else {
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
 		if (adapter->num_vfs > 32)
 			IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0);
+		break;
+	default:
+		break;
 	}
 	IXGBE_WRITE_FLUSH(&adapter->hw);
 	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
@@ -2468,7 +2672,7 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter,
 	u64 tdba = ring->dma;
 	int wait_loop = 10;
 	u32 txdctl;
-	u16 reg_idx = ring->reg_idx;
+	u8 reg_idx = ring->reg_idx;
 
 	/* disable queue to avoid issues while updating state */
 	txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
@@ -2483,8 +2687,7 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter,
 			ring->count * sizeof(union ixgbe_adv_tx_desc));
 	IXGBE_WRITE_REG(hw, IXGBE_TDH(reg_idx), 0);
 	IXGBE_WRITE_REG(hw, IXGBE_TDT(reg_idx), 0);
-	ring->head = IXGBE_TDH(reg_idx);
-	ring->tail = IXGBE_TDT(reg_idx);
+	ring->tail = hw->hw_addr + IXGBE_TDT(reg_idx);
 
 	/* configure fetching thresholds */
 	if (adapter->rx_itr_setting == 0) {
@@ -2500,7 +2703,16 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter,
 	}
 
 	/* reinitialize flowdirector state */
-	set_bit(__IXGBE_FDIR_INIT_DONE, &ring->reinit_state);
+	if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) &&
+	    adapter->atr_sample_rate) {
+		ring->atr_sample_rate = adapter->atr_sample_rate;
+		ring->atr_count = 0;
+		set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state);
+	} else {
+		ring->atr_sample_rate = 0;
+	}
+
+	clear_bit(__IXGBE_HANG_CHECK_ARMED, &ring->state);
 
 	/* enable queue */
 	txdctl |= IXGBE_TXDCTL_ENABLE;
@@ -2591,16 +2803,22 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
 				   struct ixgbe_ring *rx_ring)
 {
 	u32 srrctl;
-	int index;
-	struct ixgbe_ring_feature *feature = adapter->ring_feature;
+	u8 reg_idx = rx_ring->reg_idx;
 
-	index = rx_ring->reg_idx;
-	if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
-		unsigned long mask;
-		mask = (unsigned long) feature[RING_F_RSS].mask;
-		index = index & mask;
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB: {
+		struct ixgbe_ring_feature *feature = adapter->ring_feature;
+		const int mask = feature[RING_F_RSS].mask;
+		reg_idx = reg_idx & mask;
+	}
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+	default:
+		break;
 	}
-	srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(index));
+
+	srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(reg_idx));
 
 	srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
 	srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
@@ -2610,7 +2828,7 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
 	srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
 		  IXGBE_SRRCTL_BSIZEHDR_MASK;
 
-	if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
+	if (ring_is_ps_enabled(rx_ring)) {
 #if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER
 		srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
 #else
@@ -2623,7 +2841,7 @@ static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
 		srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
 	}
 
-	IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(index), srrctl);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(reg_idx), srrctl);
 }
 
 static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
@@ -2693,19 +2911,36 @@ static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
 }
 
 /**
+ * ixgbe_clear_rscctl - disable RSC for the indicated ring
+ * @adapter: address of board private structure
+ * @ring: structure containing ring specific data
+ **/
+void ixgbe_clear_rscctl(struct ixgbe_adapter *adapter,
+                        struct ixgbe_ring *ring)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 rscctrl;
+	u8 reg_idx = ring->reg_idx;
+
+	rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(reg_idx));
+	rscctrl &= ~IXGBE_RSCCTL_RSCEN;
+	IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(reg_idx), rscctrl);
+}
+
+/**
  * ixgbe_configure_rscctl - enable RSC for the indicated ring
  * @adapter:    address of board private structure
  * @index:      index of ring to set
  **/
-static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
+void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
 				   struct ixgbe_ring *ring)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 rscctrl;
 	int rx_buf_len;
-	u16 reg_idx = ring->reg_idx;
+	u8 reg_idx = ring->reg_idx;
 
-	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))
+	if (!ring_is_rsc_enabled(ring))
 		return;
 
 	rx_buf_len = ring->rx_buf_len;
@@ -2716,7 +2951,7 @@ static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
 	 * total size of max desc * buf_len is not greater
 	 * than 65535
 	 */
-	if (ring->flags & IXGBE_RING_RX_PS_ENABLED) {
+	if (ring_is_ps_enabled(ring)) {
 #if (MAX_SKB_FRAGS > 16)
 		rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
 #elif (MAX_SKB_FRAGS > 8)
@@ -2769,9 +3004,9 @@ static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
 				       struct ixgbe_ring *ring)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
-	int reg_idx = ring->reg_idx;
 	int wait_loop = IXGBE_MAX_RX_DESC_POLL;
 	u32 rxdctl;
+	u8 reg_idx = ring->reg_idx;
 
 	/* RXDCTL.EN will return 0 on 82598 if link is down, so skip it */
 	if (hw->mac.type == ixgbe_mac_82598EB &&
@@ -2795,7 +3030,7 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
 	struct ixgbe_hw *hw = &adapter->hw;
 	u64 rdba = ring->dma;
 	u32 rxdctl;
-	u16 reg_idx = ring->reg_idx;
+	u8 reg_idx = ring->reg_idx;
 
 	/* disable queue to avoid issues while updating state */
 	rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
@@ -2809,8 +3044,7 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
 			ring->count * sizeof(union ixgbe_adv_rx_desc));
 	IXGBE_WRITE_REG(hw, IXGBE_RDH(reg_idx), 0);
 	IXGBE_WRITE_REG(hw, IXGBE_RDT(reg_idx), 0);
-	ring->head = IXGBE_RDH(reg_idx);
-	ring->tail = IXGBE_RDT(reg_idx);
+	ring->tail = hw->hw_addr + IXGBE_RDT(reg_idx);
 
 	ixgbe_configure_srrctl(adapter, ring);
 	ixgbe_configure_rscctl(adapter, ring);
@@ -2832,7 +3066,7 @@ void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
 	IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
 
 	ixgbe_rx_desc_queue_enable(adapter, ring);
-	ixgbe_alloc_rx_buffers(adapter, ring, IXGBE_DESC_UNUSED(ring));
+	ixgbe_alloc_rx_buffers(ring, IXGBE_DESC_UNUSED(ring));
 }
 
 static void ixgbe_setup_psrtype(struct ixgbe_adapter *adapter)
@@ -2898,6 +3132,9 @@ static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter)
 
 	/* enable Tx loopback for VF/PF communication */
 	IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
+	/* Enable MAC Anti-Spoofing */
+	hw->mac.ops.set_mac_anti_spoofing(hw, (adapter->num_vfs != 0),
+					  adapter->num_vfs);
 }
 
 static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
@@ -2955,24 +3192,32 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
 		rx_ring->rx_buf_len = rx_buf_len;
 
 		if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)
-			rx_ring->flags |= IXGBE_RING_RX_PS_ENABLED;
+			set_ring_ps_enabled(rx_ring);
 		else
-			rx_ring->flags &= ~IXGBE_RING_RX_PS_ENABLED;
+			clear_ring_ps_enabled(rx_ring);
+
+		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+			set_ring_rsc_enabled(rx_ring);
+		else
+			clear_ring_rsc_enabled(rx_ring);
 
 #ifdef IXGBE_FCOE
 		if (netdev->features & NETIF_F_FCOE_MTU) {
 			struct ixgbe_ring_feature *f;
 			f = &adapter->ring_feature[RING_F_FCOE];
 			if ((i >= f->mask) && (i < f->mask + f->indices)) {
-				rx_ring->flags &= ~IXGBE_RING_RX_PS_ENABLED;
+				clear_ring_ps_enabled(rx_ring);
 				if (rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE)
 					rx_ring->rx_buf_len =
 						IXGBE_FCOE_JUMBO_FRAME_SIZE;
+			} else if (!ring_is_rsc_enabled(rx_ring) &&
+				   !ring_is_ps_enabled(rx_ring)) {
+				rx_ring->rx_buf_len =
+						IXGBE_FCOE_JUMBO_FRAME_SIZE;
 			}
 		}
 #endif /* IXGBE_FCOE */
 	}
-
 }
 
 static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter)
@@ -2995,6 +3240,7 @@ static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter)
 		rdrxctl |= IXGBE_RDRXCTL_MVMEN;
 		break;
 	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		/* Disable RSC for ACK packets */
 		IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
 		   (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
@@ -3122,6 +3368,7 @@ static void ixgbe_vlan_strip_disable(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 		break;
 	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		for (i = 0; i < adapter->num_rx_queues; i++) {
 			j = adapter->rx_ring[i]->reg_idx;
 			vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
@@ -3151,6 +3398,7 @@ static void ixgbe_vlan_strip_enable(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 		break;
 	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		for (i = 0; i < adapter->num_rx_queues; i++) {
 			j = adapter->rx_ring[i]->reg_idx;
 			vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
@@ -3348,8 +3596,6 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
 	int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
-	u32 txdctl;
-	int i, j;
 
 	if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) {
 		if (hw->mac.type == ixgbe_mac_82598EB)
@@ -3365,25 +3611,18 @@ static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
 		max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
 #endif
 
-	ixgbe_dcb_calculate_tc_credits(&adapter->dcb_cfg, max_frame,
+	ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
 					DCB_TX_CONFIG);
-	ixgbe_dcb_calculate_tc_credits(&adapter->dcb_cfg, max_frame,
+	ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
 					DCB_RX_CONFIG);
 
-	/* reconfigure the hardware */
-	ixgbe_dcb_hw_config(&adapter->hw, &adapter->dcb_cfg);
-
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		j = adapter->tx_ring[i]->reg_idx;
-		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
-		/* PThresh workaround for Tx hang with DFP enabled. */
-		txdctl |= 32;
-		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j), txdctl);
-	}
 	/* Enable VLAN tag insert/strip */
 	adapter->netdev->features |= NETIF_F_HW_VLAN_RX;
 
 	hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
+
+	/* reconfigure the hardware */
+	ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg);
 }
 
 #endif
@@ -3515,8 +3754,9 @@ static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter)
 		case ixgbe_mac_82598EB:
 			IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
 			break;
-		default:
 		case ixgbe_mac_82599EB:
+		case ixgbe_mac_X540:
+		default:
 			IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF);
 			IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF);
 			break;
@@ -3560,13 +3800,24 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	else
 		ixgbe_configure_msi_and_legacy(adapter);
 
-	/* enable the optics */
-	if (hw->phy.multispeed_fiber)
+	/* enable the optics for both mult-speed fiber and 82599 SFP+ fiber */
+	if (hw->mac.ops.enable_tx_laser &&
+	    ((hw->phy.multispeed_fiber) ||
+	     ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+	      (hw->mac.type == ixgbe_mac_82599EB))))
 		hw->mac.ops.enable_tx_laser(hw);
 
 	clear_bit(__IXGBE_DOWN, &adapter->state);
 	ixgbe_napi_enable_all(adapter);
 
+	if (ixgbe_is_sfp(hw)) {
+		ixgbe_sfp_link_config(adapter);
+	} else {
+		err = ixgbe_non_sfp_link_config(hw);
+		if (err)
+			e_err(probe, "link_config FAILED %d\n", err);
+	}
+
 	/* clear any pending interrupts, may auto mask */
 	IXGBE_READ_REG(hw, IXGBE_EICR);
 	ixgbe_irq_enable(adapter, true, true);
@@ -3589,26 +3840,8 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
 	 * If we're not hot-pluggable SFP+, we just need to configure link
 	 * and bring it up.
 	 */
-	if (hw->phy.type == ixgbe_phy_unknown) {
-		err = hw->phy.ops.identify(hw);
-		if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
-			/*
-			 * Take the device down and schedule the sfp tasklet
-			 * which will unregister_netdev and log it.
-			 */
-			ixgbe_down(adapter);
-			schedule_work(&adapter->sfp_config_module_task);
-			return err;
-		}
-	}
-
-	if (ixgbe_is_sfp(hw)) {
-		ixgbe_sfp_link_config(adapter);
-	} else {
-		err = ixgbe_non_sfp_link_config(hw);
-		if (err)
-			e_err(probe, "link_config FAILED %d\n", err);
-	}
+	if (hw->phy.type == ixgbe_phy_unknown)
+		schedule_work(&adapter->sfp_config_module_task);
 
 	/* enable transmits */
 	netif_tx_start_all_queues(adapter->netdev);
@@ -3686,15 +3919,13 @@ void ixgbe_reset(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_clean_rx_ring - Free Rx Buffers per Queue
- * @adapter: board private structure
  * @rx_ring: ring to free buffers from
  **/
-static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
-				struct ixgbe_ring *rx_ring)
+static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring)
 {
-	struct pci_dev *pdev = adapter->pdev;
+	struct device *dev = rx_ring->dev;
 	unsigned long size;
-	unsigned int i;
+	u16 i;
 
 	/* ring already cleared, nothing to do */
 	if (!rx_ring->rx_buffer_info)
@@ -3706,7 +3937,7 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
 
 		rx_buffer_info = &rx_ring->rx_buffer_info[i];
 		if (rx_buffer_info->dma) {
-			dma_unmap_single(&pdev->dev, rx_buffer_info->dma,
+			dma_unmap_single(rx_ring->dev, rx_buffer_info->dma,
 					 rx_ring->rx_buf_len,
 					 DMA_FROM_DEVICE);
 			rx_buffer_info->dma = 0;
@@ -3717,7 +3948,7 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
 			do {
 				struct sk_buff *this = skb;
 				if (IXGBE_RSC_CB(this)->delay_unmap) {
-					dma_unmap_single(&pdev->dev,
+					dma_unmap_single(dev,
 							 IXGBE_RSC_CB(this)->dma,
 							 rx_ring->rx_buf_len,
 							 DMA_FROM_DEVICE);
@@ -3731,7 +3962,7 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
 		if (!rx_buffer_info->page)
 			continue;
 		if (rx_buffer_info->page_dma) {
-			dma_unmap_page(&pdev->dev, rx_buffer_info->page_dma,
+			dma_unmap_page(dev, rx_buffer_info->page_dma,
 				       PAGE_SIZE / 2, DMA_FROM_DEVICE);
 			rx_buffer_info->page_dma = 0;
 		}
@@ -3748,24 +3979,17 @@ static void ixgbe_clean_rx_ring(struct ixgbe_adapter *adapter,
 
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;
-
-	if (rx_ring->head)
-		writel(0, adapter->hw.hw_addr + rx_ring->head);
-	if (rx_ring->tail)
-		writel(0, adapter->hw.hw_addr + rx_ring->tail);
 }
 
 /**
  * ixgbe_clean_tx_ring - Free Tx Buffers
- * @adapter: board private structure
  * @tx_ring: ring to be cleaned
  **/
-static void ixgbe_clean_tx_ring(struct ixgbe_adapter *adapter,
-				struct ixgbe_ring *tx_ring)
+static void ixgbe_clean_tx_ring(struct ixgbe_ring *tx_ring)
 {
 	struct ixgbe_tx_buffer *tx_buffer_info;
 	unsigned long size;
-	unsigned int i;
+	u16 i;
 
 	/* ring already cleared, nothing to do */
 	if (!tx_ring->tx_buffer_info)
@@ -3774,7 +3998,7 @@ static void ixgbe_clean_tx_ring(struct ixgbe_adapter *adapter,
 	/* Free all the Tx ring sk_buffs */
 	for (i = 0; i < tx_ring->count; i++) {
 		tx_buffer_info = &tx_ring->tx_buffer_info[i];
-		ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
+		ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
 	}
 
 	size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
@@ -3785,11 +4009,6 @@ static void ixgbe_clean_tx_ring(struct ixgbe_adapter *adapter,
 
 	tx_ring->next_to_use = 0;
 	tx_ring->next_to_clean = 0;
-
-	if (tx_ring->head)
-		writel(0, adapter->hw.hw_addr + tx_ring->head);
-	if (tx_ring->tail)
-		writel(0, adapter->hw.hw_addr + tx_ring->tail);
 }
 
 /**
@@ -3801,7 +4020,7 @@ static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_rx_queues; i++)
-		ixgbe_clean_rx_ring(adapter, adapter->rx_ring[i]);
+		ixgbe_clean_rx_ring(adapter->rx_ring[i]);
 }
 
 /**
@@ -3813,7 +4032,7 @@ static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter)
 	int i;
 
 	for (i = 0; i < adapter->num_tx_queues; i++)
-		ixgbe_clean_tx_ring(adapter, adapter->tx_ring[i]);
+		ixgbe_clean_tx_ring(adapter->tx_ring[i]);
 }
 
 void ixgbe_down(struct ixgbe_adapter *adapter)
@@ -3822,7 +4041,7 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 rxctrl;
 	u32 txdctl;
-	int i, j;
+	int i;
 	int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
 
 	/* signal that we are down to the interrupt handler */
@@ -3880,26 +4099,36 @@ void ixgbe_down(struct ixgbe_adapter *adapter)
 
 	/* disable transmits in the hardware now that interrupts are off */
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		j = adapter->tx_ring[i]->reg_idx;
-		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(j));
-		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(j),
+		u8 reg_idx = adapter->tx_ring[i]->reg_idx;
+		txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
+		IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx),
 				(txdctl & ~IXGBE_TXDCTL_ENABLE));
 	}
 	/* Disable the Tx DMA engine on 82599 */
-	if (hw->mac.type == ixgbe_mac_82599EB)
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL,
 				(IXGBE_READ_REG(hw, IXGBE_DMATXCTL) &
 				 ~IXGBE_DMATXCTL_TE));
-
-	/* power down the optics */
-	if (hw->phy.multispeed_fiber)
-		hw->mac.ops.disable_tx_laser(hw);
+		break;
+	default:
+		break;
+	}
 
 	/* clear n-tuple filters that are cached */
 	ethtool_ntuple_flush(netdev);
 
 	if (!pci_channel_offline(adapter->pdev))
 		ixgbe_reset(adapter);
+
+	/* power down the optics for multispeed fiber and 82599 SFP+ fiber */
+	if (hw->mac.ops.disable_tx_laser &&
+	    ((hw->phy.multispeed_fiber) ||
+	     ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+	      (hw->mac.type == ixgbe_mac_82599EB))))
+		hw->mac.ops.disable_tx_laser(hw);
+
 	ixgbe_clean_all_tx_rings(adapter);
 	ixgbe_clean_all_rx_rings(adapter);
 
@@ -3924,10 +4153,8 @@ static int ixgbe_poll(struct napi_struct *napi, int budget)
 	int tx_clean_complete, work_done = 0;
 
 #ifdef CONFIG_IXGBE_DCA
-	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
-		ixgbe_update_tx_dca(adapter, adapter->tx_ring[0]);
-		ixgbe_update_rx_dca(adapter, adapter->rx_ring[0]);
-	}
+	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+		ixgbe_update_dca(q_vector);
 #endif
 
 	tx_clean_complete = ixgbe_clean_tx_irq(q_vector, adapter->tx_ring[0]);
@@ -3955,6 +4182,8 @@ static void ixgbe_tx_timeout(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 
+	adapter->tx_timeout_count++;
+
 	/* Do the reset outside of interrupt context */
 	schedule_work(&adapter->reset_task);
 }
@@ -3969,8 +4198,6 @@ static void ixgbe_reset_task(struct work_struct *work)
 	    test_bit(__IXGBE_RESETTING, &adapter->state))
 		return;
 
-	adapter->tx_timeout_count++;
-
 	ixgbe_dump(adapter);
 	netdev_err(adapter->netdev, "Reset adapter\n");
 	ixgbe_reinit_locked(adapter);
@@ -4220,19 +4447,16 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
 static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter)
 {
 	int i;
-	bool ret = false;
 
-	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i]->reg_idx = i;
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i]->reg_idx = i;
-		ret = true;
-	} else {
-		ret = false;
-	}
+	if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
+		return false;
 
-	return ret;
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		adapter->rx_ring[i]->reg_idx = i;
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		adapter->tx_ring[i]->reg_idx = i;
+
+	return true;
 }
 
 #ifdef CONFIG_IXGBE_DCB
@@ -4249,71 +4473,67 @@ static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
 	bool ret = false;
 	int dcb_i = adapter->ring_feature[RING_F_DCB].indices;
 
-	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-		if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
-			/* the number of queues is assumed to be symmetric */
-			for (i = 0; i < dcb_i; i++) {
-				adapter->rx_ring[i]->reg_idx = i << 3;
-				adapter->tx_ring[i]->reg_idx = i << 2;
-			}
-			ret = true;
-		} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
-			if (dcb_i == 8) {
-				/*
-				 * Tx TC0 starts at: descriptor queue 0
-				 * Tx TC1 starts at: descriptor queue 32
-				 * Tx TC2 starts at: descriptor queue 64
-				 * Tx TC3 starts at: descriptor queue 80
-				 * Tx TC4 starts at: descriptor queue 96
-				 * Tx TC5 starts at: descriptor queue 104
-				 * Tx TC6 starts at: descriptor queue 112
-				 * Tx TC7 starts at: descriptor queue 120
-				 *
-				 * Rx TC0-TC7 are offset by 16 queues each
-				 */
-				for (i = 0; i < 3; i++) {
-					adapter->tx_ring[i]->reg_idx = i << 5;
-					adapter->rx_ring[i]->reg_idx = i << 4;
-				}
-				for ( ; i < 5; i++) {
-					adapter->tx_ring[i]->reg_idx =
-								 ((i + 2) << 4);
-					adapter->rx_ring[i]->reg_idx = i << 4;
-				}
-				for ( ; i < dcb_i; i++) {
-					adapter->tx_ring[i]->reg_idx =
-								 ((i + 8) << 3);
-					adapter->rx_ring[i]->reg_idx = i << 4;
-				}
+	if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
+		return false;
 
-				ret = true;
-			} else if (dcb_i == 4) {
-				/*
-				 * Tx TC0 starts at: descriptor queue 0
-				 * Tx TC1 starts at: descriptor queue 64
-				 * Tx TC2 starts at: descriptor queue 96
-				 * Tx TC3 starts at: descriptor queue 112
-				 *
-				 * Rx TC0-TC3 are offset by 32 queues each
-				 */
-				adapter->tx_ring[0]->reg_idx = 0;
-				adapter->tx_ring[1]->reg_idx = 64;
-				adapter->tx_ring[2]->reg_idx = 96;
-				adapter->tx_ring[3]->reg_idx = 112;
-				for (i = 0 ; i < dcb_i; i++)
-					adapter->rx_ring[i]->reg_idx = i << 5;
-
-				ret = true;
-			} else {
-				ret = false;
+	/* the number of queues is assumed to be symmetric */
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82598EB:
+		for (i = 0; i < dcb_i; i++) {
+			adapter->rx_ring[i]->reg_idx = i << 3;
+			adapter->tx_ring[i]->reg_idx = i << 2;
+		}
+		ret = true;
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		if (dcb_i == 8) {
+			/*
+			 * Tx TC0 starts at: descriptor queue 0
+			 * Tx TC1 starts at: descriptor queue 32
+			 * Tx TC2 starts at: descriptor queue 64
+			 * Tx TC3 starts at: descriptor queue 80
+			 * Tx TC4 starts at: descriptor queue 96
+			 * Tx TC5 starts at: descriptor queue 104
+			 * Tx TC6 starts at: descriptor queue 112
+			 * Tx TC7 starts at: descriptor queue 120
+			 *
+			 * Rx TC0-TC7 are offset by 16 queues each
+			 */
+			for (i = 0; i < 3; i++) {
+				adapter->tx_ring[i]->reg_idx = i << 5;
+				adapter->rx_ring[i]->reg_idx = i << 4;
 			}
-		} else {
-			ret = false;
+			for ( ; i < 5; i++) {
+				adapter->tx_ring[i]->reg_idx = ((i + 2) << 4);
+				adapter->rx_ring[i]->reg_idx = i << 4;
+			}
+			for ( ; i < dcb_i; i++) {
+				adapter->tx_ring[i]->reg_idx = ((i + 8) << 3);
+				adapter->rx_ring[i]->reg_idx = i << 4;
+			}
+			ret = true;
+		} else if (dcb_i == 4) {
+			/*
+			 * Tx TC0 starts at: descriptor queue 0
+			 * Tx TC1 starts at: descriptor queue 64
+			 * Tx TC2 starts at: descriptor queue 96
+			 * Tx TC3 starts at: descriptor queue 112
+			 *
+			 * Rx TC0-TC3 are offset by 32 queues each
+			 */
+			adapter->tx_ring[0]->reg_idx = 0;
+			adapter->tx_ring[1]->reg_idx = 64;
+			adapter->tx_ring[2]->reg_idx = 96;
+			adapter->tx_ring[3]->reg_idx = 112;
+			for (i = 0 ; i < dcb_i; i++)
+				adapter->rx_ring[i]->reg_idx = i << 5;
+			ret = true;
 		}
-	} else {
-		ret = false;
+		break;
+	default:
+		break;
 	}
-
 	return ret;
 }
 #endif
@@ -4353,55 +4573,55 @@ static inline bool ixgbe_cache_ring_fdir(struct ixgbe_adapter *adapter)
  */
 static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
 {
-	int i, fcoe_rx_i = 0, fcoe_tx_i = 0;
-	bool ret = false;
 	struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+	int i;
+	u8 fcoe_rx_i = 0, fcoe_tx_i = 0;
+
+	if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
+		return false;
 
-	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
 #ifdef CONFIG_IXGBE_DCB
-		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-			struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+	if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+		struct ixgbe_fcoe *fcoe = &adapter->fcoe;
 
-			ixgbe_cache_ring_dcb(adapter);
-			/* find out queues in TC for FCoE */
-			fcoe_rx_i = adapter->rx_ring[fcoe->tc]->reg_idx + 1;
-			fcoe_tx_i = adapter->tx_ring[fcoe->tc]->reg_idx + 1;
-			/*
-			 * In 82599, the number of Tx queues for each traffic
-			 * class for both 8-TC and 4-TC modes are:
-			 * TCs  : TC0 TC1 TC2 TC3 TC4 TC5 TC6 TC7
-			 * 8 TCs:  32  32  16  16   8   8   8   8
-			 * 4 TCs:  64  64  32  32
-			 * We have max 8 queues for FCoE, where 8 the is
-			 * FCoE redirection table size. If TC for FCoE is
-			 * less than or equal to TC3, we have enough queues
-			 * to add max of 8 queues for FCoE, so we start FCoE
-			 * tx descriptor from the next one, i.e., reg_idx + 1.
-			 * If TC for FCoE is above TC3, implying 8 TC mode,
-			 * and we need 8 for FCoE, we have to take all queues
-			 * in that traffic class for FCoE.
-			 */
-			if ((f->indices == IXGBE_FCRETA_SIZE) && (fcoe->tc > 3))
-				fcoe_tx_i--;
-		}
+		ixgbe_cache_ring_dcb(adapter);
+		/* find out queues in TC for FCoE */
+		fcoe_rx_i = adapter->rx_ring[fcoe->tc]->reg_idx + 1;
+		fcoe_tx_i = adapter->tx_ring[fcoe->tc]->reg_idx + 1;
+		/*
+		 * In 82599, the number of Tx queues for each traffic
+		 * class for both 8-TC and 4-TC modes are:
+		 * TCs  : TC0 TC1 TC2 TC3 TC4 TC5 TC6 TC7
+		 * 8 TCs:  32  32  16  16   8   8   8   8
+		 * 4 TCs:  64  64  32  32
+		 * We have max 8 queues for FCoE, where 8 the is
+		 * FCoE redirection table size. If TC for FCoE is
+		 * less than or equal to TC3, we have enough queues
+		 * to add max of 8 queues for FCoE, so we start FCoE
+		 * Tx queue from the next one, i.e., reg_idx + 1.
+		 * If TC for FCoE is above TC3, implying 8 TC mode,
+		 * and we need 8 for FCoE, we have to take all queues
+		 * in that traffic class for FCoE.
+		 */
+		if ((f->indices == IXGBE_FCRETA_SIZE) && (fcoe->tc > 3))
+			fcoe_tx_i--;
+	}
 #endif /* CONFIG_IXGBE_DCB */
-		if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
-			if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
-			    (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
-				ixgbe_cache_ring_fdir(adapter);
-			else
-				ixgbe_cache_ring_rss(adapter);
+	if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+		if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) ||
+		    (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+			ixgbe_cache_ring_fdir(adapter);
+		else
+			ixgbe_cache_ring_rss(adapter);
 
-			fcoe_rx_i = f->mask;
-			fcoe_tx_i = f->mask;
-		}
-		for (i = 0; i < f->indices; i++, fcoe_rx_i++, fcoe_tx_i++) {
-			adapter->rx_ring[f->mask + i]->reg_idx = fcoe_rx_i;
-			adapter->tx_ring[f->mask + i]->reg_idx = fcoe_tx_i;
-		}
-		ret = true;
+		fcoe_rx_i = f->mask;
+		fcoe_tx_i = f->mask;
 	}
-	return ret;
+	for (i = 0; i < f->indices; i++, fcoe_rx_i++, fcoe_tx_i++) {
+		adapter->rx_ring[f->mask + i]->reg_idx = fcoe_rx_i;
+		adapter->tx_ring[f->mask + i]->reg_idx = fcoe_tx_i;
+	}
+	return true;
 }
 
 #endif /* IXGBE_FCOE */
@@ -4470,65 +4690,55 @@ static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
  **/
 static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
 {
-	int i;
-	int orig_node = adapter->node;
+	int rx = 0, tx = 0, nid = adapter->node;
 
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct ixgbe_ring *ring = adapter->tx_ring[i];
-		if (orig_node == -1) {
-			int cur_node = next_online_node(adapter->node);
-			if (cur_node == MAX_NUMNODES)
-				cur_node = first_online_node;
-			adapter->node = cur_node;
-		}
-		ring = kzalloc_node(sizeof(struct ixgbe_ring), GFP_KERNEL,
-				    adapter->node);
+	if (nid < 0 || !node_online(nid))
+		nid = first_online_node;
+
+	for (; tx < adapter->num_tx_queues; tx++) {
+		struct ixgbe_ring *ring;
+
+		ring = kzalloc_node(sizeof(*ring), GFP_KERNEL, nid);
 		if (!ring)
-			ring = kzalloc(sizeof(struct ixgbe_ring), GFP_KERNEL);
+			ring = kzalloc(sizeof(*ring), GFP_KERNEL);
 		if (!ring)
-			goto err_tx_ring_allocation;
+			goto err_allocation;
 		ring->count = adapter->tx_ring_count;
-		ring->queue_index = i;
-		ring->numa_node = adapter->node;
+		ring->queue_index = tx;
+		ring->numa_node = nid;
+		ring->dev = &adapter->pdev->dev;
+		ring->netdev = adapter->netdev;
 
-		adapter->tx_ring[i] = ring;
+		adapter->tx_ring[tx] = ring;
 	}
 
-	/* Restore the adapter's original node */
-	adapter->node = orig_node;
+	for (; rx < adapter->num_rx_queues; rx++) {
+		struct ixgbe_ring *ring;
 
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct ixgbe_ring *ring = adapter->rx_ring[i];
-		if (orig_node == -1) {
-			int cur_node = next_online_node(adapter->node);
-			if (cur_node == MAX_NUMNODES)
-				cur_node = first_online_node;
-			adapter->node = cur_node;
-		}
-		ring = kzalloc_node(sizeof(struct ixgbe_ring), GFP_KERNEL,
-				    adapter->node);
+		ring = kzalloc_node(sizeof(*ring), GFP_KERNEL, nid);
 		if (!ring)
-			ring = kzalloc(sizeof(struct ixgbe_ring), GFP_KERNEL);
+			ring = kzalloc(sizeof(*ring), GFP_KERNEL);
 		if (!ring)
-			goto err_rx_ring_allocation;
+			goto err_allocation;
 		ring->count = adapter->rx_ring_count;
-		ring->queue_index = i;
-		ring->numa_node = adapter->node;
+		ring->queue_index = rx;
+		ring->numa_node = nid;
+		ring->dev = &adapter->pdev->dev;
+		ring->netdev = adapter->netdev;
 
-		adapter->rx_ring[i] = ring;
+		adapter->rx_ring[rx] = ring;
 	}
 
-	/* Restore the adapter's original node */
-	adapter->node = orig_node;
-
 	ixgbe_cache_ring_register(adapter);
 
 	return 0;
 
-err_rx_ring_allocation:
-	for (i = 0; i < adapter->num_tx_queues; i++)
-		kfree(adapter->tx_ring[i]);
-err_tx_ring_allocation:
+err_allocation:
+	while (tx)
+		kfree(adapter->tx_ring[--tx]);
+
+	while (rx)
+		kfree(adapter->rx_ring[--rx]);
 	return -ENOMEM;
 }
 
@@ -4750,6 +4960,11 @@ err_set_interrupt:
 	return err;
 }
 
+static void ring_free_rcu(struct rcu_head *head)
+{
+	kfree(container_of(head, struct ixgbe_ring, rcu));
+}
+
 /**
  * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
  * @adapter: board private structure to clear interrupt scheme on
@@ -4766,10 +4981,18 @@ void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
 		adapter->tx_ring[i] = NULL;
 	}
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		kfree(adapter->rx_ring[i]);
+		struct ixgbe_ring *ring = adapter->rx_ring[i];
+
+		/* ixgbe_get_stats64() might access this ring, we must wait
+		 * a grace period before freeing it.
+		 */
+		call_rcu(&ring->rcu, ring_free_rcu);
 		adapter->rx_ring[i] = NULL;
 	}
 
+	adapter->num_tx_queues = 0;
+	adapter->num_rx_queues = 0;
+
 	ixgbe_free_q_vectors(adapter);
 	ixgbe_reset_interrupt_capability(adapter);
 }
@@ -4843,6 +5066,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	int j;
 	struct tc_configuration *tc;
 #endif
+	int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
 
 	/* PCI config space info */
 
@@ -4857,11 +5081,14 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	adapter->ring_feature[RING_F_RSS].indices = rss;
 	adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
 	adapter->ring_feature[RING_F_DCB].indices = IXGBE_MAX_DCB_INDICES;
-	if (hw->mac.type == ixgbe_mac_82598EB) {
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
 		if (hw->device_id == IXGBE_DEV_ID_82598AT)
 			adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE;
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
-	} else if (hw->mac.type == ixgbe_mac_82599EB) {
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
 		adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
 		adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
@@ -4890,6 +5117,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 		adapter->fcoe.up = IXGBE_FCOE_DEFTC;
 #endif
 #endif /* IXGBE_FCOE */
+		break;
+	default:
+		break;
 	}
 
 #ifdef CONFIG_IXGBE_DCB
@@ -4919,8 +5149,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 #ifdef CONFIG_DCB
 	adapter->last_lfc_mode = hw->fc.current_mode;
 #endif
-	hw->fc.high_water = IXGBE_DEFAULT_FCRTH;
-	hw->fc.low_water = IXGBE_DEFAULT_FCRTL;
+	hw->fc.high_water = FC_HIGH_WATER(max_frame);
+	hw->fc.low_water = FC_LOW_WATER(max_frame);
 	hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
 	hw->fc.send_xon = true;
 	hw->fc.disable_fc_autoneg = false;
@@ -4958,30 +5188,27 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
  * @tx_ring:    tx descriptor ring (for a specific queue) to setup
  *
  * Return 0 on success, negative on failure
  **/
-int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
-			     struct ixgbe_ring *tx_ring)
+int ixgbe_setup_tx_resources(struct ixgbe_ring *tx_ring)
 {
-	struct pci_dev *pdev = adapter->pdev;
+	struct device *dev = tx_ring->dev;
 	int size;
 
 	size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
-	tx_ring->tx_buffer_info = vmalloc_node(size, tx_ring->numa_node);
+	tx_ring->tx_buffer_info = vzalloc_node(size, tx_ring->numa_node);
 	if (!tx_ring->tx_buffer_info)
-		tx_ring->tx_buffer_info = vmalloc(size);
+		tx_ring->tx_buffer_info = vzalloc(size);
 	if (!tx_ring->tx_buffer_info)
 		goto err;
-	memset(tx_ring->tx_buffer_info, 0, size);
 
 	/* round up to nearest 4K */
 	tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc);
 	tx_ring->size = ALIGN(tx_ring->size, 4096);
 
-	tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
+	tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
 					   &tx_ring->dma, GFP_KERNEL);
 	if (!tx_ring->desc)
 		goto err;
@@ -4994,7 +5221,7 @@ int ixgbe_setup_tx_resources(struct ixgbe_adapter *adapter,
 err:
 	vfree(tx_ring->tx_buffer_info);
 	tx_ring->tx_buffer_info = NULL;
-	e_err(probe, "Unable to allocate memory for the Tx descriptor ring\n");
+	dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n");
 	return -ENOMEM;
 }
 
@@ -5013,7 +5240,7 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
 	int i, err = 0;
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		err = ixgbe_setup_tx_resources(adapter, adapter->tx_ring[i]);
+		err = ixgbe_setup_tx_resources(adapter->tx_ring[i]);
 		if (!err)
 			continue;
 		e_err(probe, "Allocation for Tx Queue %u failed\n", i);
@@ -5025,48 +5252,40 @@ static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors)
- * @adapter: board private structure
  * @rx_ring:    rx descriptor ring (for a specific queue) to setup
  *
  * Returns 0 on success, negative on failure
  **/
-int ixgbe_setup_rx_resources(struct ixgbe_adapter *adapter,
-			     struct ixgbe_ring *rx_ring)
+int ixgbe_setup_rx_resources(struct ixgbe_ring *rx_ring)
 {
-	struct pci_dev *pdev = adapter->pdev;
+	struct device *dev = rx_ring->dev;
 	int size;
 
 	size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
-	rx_ring->rx_buffer_info = vmalloc_node(size, adapter->node);
+	rx_ring->rx_buffer_info = vzalloc_node(size, rx_ring->numa_node);
 	if (!rx_ring->rx_buffer_info)
-		rx_ring->rx_buffer_info = vmalloc(size);
-	if (!rx_ring->rx_buffer_info) {
-		e_err(probe, "vmalloc allocation failed for the Rx "
-		      "descriptor ring\n");
-		goto alloc_failed;
-	}
-	memset(rx_ring->rx_buffer_info, 0, size);
+		rx_ring->rx_buffer_info = vzalloc(size);
+	if (!rx_ring->rx_buffer_info)
+		goto err;
 
 	/* Round up to nearest 4K */
 	rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc);
 	rx_ring->size = ALIGN(rx_ring->size, 4096);
 
-	rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
+	rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
 					   &rx_ring->dma, GFP_KERNEL);
 
-	if (!rx_ring->desc) {
-		e_err(probe, "Memory allocation failed for the Rx "
-		      "descriptor ring\n");
-		vfree(rx_ring->rx_buffer_info);
-		goto alloc_failed;
-	}
+	if (!rx_ring->desc)
+		goto err;
 
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;
 
 	return 0;
-
-alloc_failed:
+err:
+	vfree(rx_ring->rx_buffer_info);
+	rx_ring->rx_buffer_info = NULL;
+	dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
 	return -ENOMEM;
 }
 
@@ -5080,13 +5299,12 @@ alloc_failed:
  *
  * Return 0 on success, negative on failure
  **/
-
 static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
 {
 	int i, err = 0;
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		err = ixgbe_setup_rx_resources(adapter, adapter->rx_ring[i]);
+		err = ixgbe_setup_rx_resources(adapter->rx_ring[i]);
 		if (!err)
 			continue;
 		e_err(probe, "Allocation for Rx Queue %u failed\n", i);
@@ -5098,23 +5316,23 @@ static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
 
 /**
  * ixgbe_free_tx_resources - Free Tx Resources per Queue
- * @adapter: board private structure
  * @tx_ring: Tx descriptor ring for a specific queue
  *
  * Free all transmit software resources
  **/
-void ixgbe_free_tx_resources(struct ixgbe_adapter *adapter,
-			     struct ixgbe_ring *tx_ring)
+void ixgbe_free_tx_resources(struct ixgbe_ring *tx_ring)
 {
-	struct pci_dev *pdev = adapter->pdev;
-
-	ixgbe_clean_tx_ring(adapter, tx_ring);
+	ixgbe_clean_tx_ring(tx_ring);
 
 	vfree(tx_ring->tx_buffer_info);
 	tx_ring->tx_buffer_info = NULL;
 
-	dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
-			  tx_ring->dma);
+	/* if not set, then don't free */
+	if (!tx_ring->desc)
+		return;
+
+	dma_free_coherent(tx_ring->dev, tx_ring->size,
+			  tx_ring->desc, tx_ring->dma);
 
 	tx_ring->desc = NULL;
 }
@@ -5131,28 +5349,28 @@ static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter)
 
 	for (i = 0; i < adapter->num_tx_queues; i++)
 		if (adapter->tx_ring[i]->desc)
-			ixgbe_free_tx_resources(adapter, adapter->tx_ring[i]);
+			ixgbe_free_tx_resources(adapter->tx_ring[i]);
 }
 
 /**
  * ixgbe_free_rx_resources - Free Rx Resources
- * @adapter: board private structure
  * @rx_ring: ring to clean the resources from
  *
  * Free all receive software resources
  **/
-void ixgbe_free_rx_resources(struct ixgbe_adapter *adapter,
-			     struct ixgbe_ring *rx_ring)
+void ixgbe_free_rx_resources(struct ixgbe_ring *rx_ring)
 {
-	struct pci_dev *pdev = adapter->pdev;
-
-	ixgbe_clean_rx_ring(adapter, rx_ring);
+	ixgbe_clean_rx_ring(rx_ring);
 
 	vfree(rx_ring->rx_buffer_info);
 	rx_ring->rx_buffer_info = NULL;
 
-	dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
-			  rx_ring->dma);
+	/* if not set, then don't free */
+	if (!rx_ring->desc)
+		return;
+
+	dma_free_coherent(rx_ring->dev, rx_ring->size,
+			  rx_ring->desc, rx_ring->dma);
 
 	rx_ring->desc = NULL;
 }
@@ -5169,7 +5387,7 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter)
 
 	for (i = 0; i < adapter->num_rx_queues; i++)
 		if (adapter->rx_ring[i]->desc)
-			ixgbe_free_rx_resources(adapter, adapter->rx_ring[i]);
+			ixgbe_free_rx_resources(adapter->rx_ring[i]);
 }
 
 /**
@@ -5182,6 +5400,7 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter)
 static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
 
 	/* MTU < 68 is an error and causes problems on some kernels */
@@ -5192,6 +5411,9 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
 	/* must set new MTU before calling down or up */
 	netdev->mtu = new_mtu;
 
+	hw->fc.high_water = FC_HIGH_WATER(max_frame);
+	hw->fc.low_water = FC_LOW_WATER(max_frame);
+
 	if (netif_running(netdev))
 		ixgbe_reinit_locked(adapter);
 
@@ -5287,8 +5509,8 @@ static int ixgbe_close(struct net_device *netdev)
 #ifdef CONFIG_PM
 static int ixgbe_resume(struct pci_dev *pdev)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
 	u32 err;
 
 	pci_set_power_state(pdev, PCI_D0);
@@ -5319,7 +5541,7 @@ static int ixgbe_resume(struct pci_dev *pdev)
 	IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
 
 	if (netif_running(netdev)) {
-		err = ixgbe_open(adapter->netdev);
+		err = ixgbe_open(netdev);
 		if (err)
 			return err;
 	}
@@ -5332,8 +5554,8 @@ static int ixgbe_resume(struct pci_dev *pdev)
 
 static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
 	u32 ctrl, fctrl;
 	u32 wufc = adapter->wol;
@@ -5350,6 +5572,8 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		ixgbe_free_all_rx_resources(adapter);
 	}
 
+	ixgbe_clear_interrupt_scheme(adapter);
+
 #ifdef CONFIG_PM
 	retval = pci_save_state(pdev);
 	if (retval)
@@ -5376,15 +5600,20 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 		IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0);
 	}
 
-	if (wufc && hw->mac.type == ixgbe_mac_82599EB)
-		pci_wake_from_d3(pdev, true);
-	else
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
 		pci_wake_from_d3(pdev, false);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		pci_wake_from_d3(pdev, !!wufc);
+		break;
+	default:
+		break;
+	}
 
 	*enable_wake = !!wufc;
 
-	ixgbe_clear_interrupt_scheme(adapter);
-
 	ixgbe_release_hw_control(adapter);
 
 	pci_disable_device(pdev);
@@ -5433,10 +5662,12 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
+	struct ixgbe_hw_stats *hwstats = &adapter->stats;
 	u64 total_mpc = 0;
 	u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
-	u64 non_eop_descs = 0, restart_queue = 0;
-	struct ixgbe_hw_stats *hwstats = &adapter->stats;
+	u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0;
+	u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0;
+	u64 bytes = 0, packets = 0;
 
 	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
 	    test_bit(__IXGBE_RESETTING, &adapter->state))
@@ -5449,21 +5680,41 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 			adapter->hw_rx_no_dma_resources +=
 				IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
 		for (i = 0; i < adapter->num_rx_queues; i++) {
-			rsc_count += adapter->rx_ring[i]->rsc_count;
-			rsc_flush += adapter->rx_ring[i]->rsc_flush;
+			rsc_count += adapter->rx_ring[i]->rx_stats.rsc_count;
+			rsc_flush += adapter->rx_ring[i]->rx_stats.rsc_flush;
 		}
 		adapter->rsc_total_count = rsc_count;
 		adapter->rsc_total_flush = rsc_flush;
 	}
 
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct ixgbe_ring *rx_ring = adapter->rx_ring[i];
+		non_eop_descs += rx_ring->rx_stats.non_eop_descs;
+		alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed;
+		alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed;
+		bytes += rx_ring->stats.bytes;
+		packets += rx_ring->stats.packets;
+	}
+	adapter->non_eop_descs = non_eop_descs;
+	adapter->alloc_rx_page_failed = alloc_rx_page_failed;
+	adapter->alloc_rx_buff_failed = alloc_rx_buff_failed;
+	netdev->stats.rx_bytes = bytes;
+	netdev->stats.rx_packets = packets;
+
+	bytes = 0;
+	packets = 0;
 	/* gather some stats to the adapter struct that are per queue */
-	for (i = 0; i < adapter->num_tx_queues; i++)
-		restart_queue += adapter->tx_ring[i]->restart_queue;
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
+		restart_queue += tx_ring->tx_stats.restart_queue;
+		tx_busy += tx_ring->tx_stats.tx_busy;
+		bytes += tx_ring->stats.bytes;
+		packets += tx_ring->stats.packets;
+	}
 	adapter->restart_queue = restart_queue;
-
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		non_eop_descs += adapter->rx_ring[i]->non_eop_descs;
-	adapter->non_eop_descs = non_eop_descs;
+	adapter->tx_busy = tx_busy;
+	netdev->stats.tx_bytes = bytes;
+	netdev->stats.tx_packets = packets;
 
 	hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
 	for (i = 0; i < 8; i++) {
@@ -5478,17 +5729,18 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 		hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i));
 		hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i));
 		hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i));
-		if (hw->mac.type == ixgbe_mac_82599EB) {
-			hwstats->pxonrxc[i] +=
-				IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
-			hwstats->pxoffrxc[i] +=
-				IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
-			hwstats->qprdc[i] += IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
-		} else {
+		switch (hw->mac.type) {
+		case ixgbe_mac_82598EB:
 			hwstats->pxonrxc[i] +=
 				IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
-			hwstats->pxoffrxc[i] +=
-				IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+			break;
+		case ixgbe_mac_82599EB:
+		case ixgbe_mac_X540:
+			hwstats->pxonrxc[i] +=
+				IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
+			break;
+		default:
+			break;
 		}
 		hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
 		hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
@@ -5497,21 +5749,25 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 	/* work around hardware counting issue */
 	hwstats->gprc -= missed_rx;
 
+	ixgbe_update_xoff_received(adapter);
+
 	/* 82598 hardware only has a 32 bit counter in the high register */
-	if (hw->mac.type == ixgbe_mac_82599EB) {
-		u64 tmp;
+	switch (hw->mac.type) {
+	case ixgbe_mac_82598EB:
+		hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+		hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
+		hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
+		hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH);
+		break;
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
-		tmp = IXGBE_READ_REG(hw, IXGBE_GORCH) & 0xF;
-						/* 4 high bits of GORC */
-		hwstats->gorc += (tmp << 32);
+		IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
 		hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
-		tmp = IXGBE_READ_REG(hw, IXGBE_GOTCH) & 0xF;
-						/* 4 high bits of GOTC */
-		hwstats->gotc += (tmp << 32);
+		IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */
 		hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORL);
-		IXGBE_READ_REG(hw, IXGBE_TORH);	/* to clear */
+		IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
 		hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
-		hwstats->lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
 		hwstats->fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
 		hwstats->fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
 #ifdef IXGBE_FCOE
@@ -5522,12 +5778,9 @@ void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 		hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
 		hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
 #endif /* IXGBE_FCOE */
-	} else {
-		hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
-		hwstats->lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
-		hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
-		hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
-		hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH);
+		break;
+	default:
+		break;
 	}
 	bprc = IXGBE_READ_REG(hw, IXGBE_BPRC);
 	hwstats->bprc += bprc;
@@ -5700,8 +5953,8 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work)
 
 	if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
 		for (i = 0; i < adapter->num_tx_queues; i++)
-			set_bit(__IXGBE_FDIR_INIT_DONE,
-				&(adapter->tx_ring[i]->reinit_state));
+			set_bit(__IXGBE_TX_FDIR_INIT_DONE,
+				&(adapter->tx_ring[i]->state));
 	} else {
 		e_err(probe, "failed to finish FDIR re-initialization, "
 		      "ignored adding FDIR ATR filters\n");
@@ -5710,6 +5963,26 @@ static void ixgbe_fdir_reinit_task(struct work_struct *work)
 	netif_tx_start_all_queues(adapter->netdev);
 }
 
+static void ixgbe_spoof_check(struct ixgbe_adapter *adapter)
+{
+	u32 ssvpc;
+
+	/* Do not perform spoof check for 82598 */
+	if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+		return;
+
+	ssvpc = IXGBE_READ_REG(&adapter->hw, IXGBE_SSVPC);
+
+	/*
+	 * ssvpc register is cleared on read, if zero then no
+	 * spoofed packets in the last interval.
+	 */
+	if (!ssvpc)
+		return;
+
+	e_warn(drv, "%d Spoofed packets detected\n", ssvpc);
+}
+
 static DEFINE_MUTEX(ixgbe_watchdog_lock);
 
 /**
@@ -5763,17 +6036,27 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 		if (!netif_carrier_ok(netdev)) {
 			bool flow_rx, flow_tx;
 
-			if (hw->mac.type == ixgbe_mac_82599EB) {
-				u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
-				u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
-				flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
-				flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
-			} else {
+			switch (hw->mac.type) {
+			case ixgbe_mac_82598EB: {
 				u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
 				u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS);
 				flow_rx = !!(frctl & IXGBE_FCTRL_RFCE);
 				flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
 			}
+				break;
+			case ixgbe_mac_82599EB:
+			case ixgbe_mac_X540: {
+				u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+				u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+				flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
+				flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
+			}
+				break;
+			default:
+				flow_tx = false;
+				flow_rx = false;
+				break;
+			}
 
 			e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
 			       (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
@@ -5787,7 +6070,10 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 			netif_carrier_on(netdev);
 		} else {
 			/* Force detection of hung controller */
-			adapter->detect_tx_hung = true;
+			for (i = 0; i < adapter->num_tx_queues; i++) {
+				tx_ring = adapter->tx_ring[i];
+				set_check_for_tx_hang(tx_ring);
+			}
 		}
 	} else {
 		adapter->link_up = false;
@@ -5817,13 +6103,14 @@ static void ixgbe_watchdog_task(struct work_struct *work)
 		}
 	}
 
+	ixgbe_spoof_check(adapter);
 	ixgbe_update_stats(adapter);
 	mutex_unlock(&ixgbe_watchdog_lock);
 }
 
 static int ixgbe_tso(struct ixgbe_adapter *adapter,
 		     struct ixgbe_ring *tx_ring, struct sk_buff *skb,
-		     u32 tx_flags, u8 *hdr_len)
+		     u32 tx_flags, u8 *hdr_len, __be16 protocol)
 {
 	struct ixgbe_adv_tx_context_desc *context_desc;
 	unsigned int i;
@@ -5841,7 +6128,7 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter,
 		l4len = tcp_hdrlen(skb);
 		*hdr_len += l4len;
 
-		if (skb->protocol == htons(ETH_P_IP)) {
+		if (protocol == htons(ETH_P_IP)) {
 			struct iphdr *iph = ip_hdr(skb);
 			iph->tot_len = 0;
 			iph->check = 0;
@@ -5880,7 +6167,7 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter,
 		type_tucmd_mlhl = (IXGBE_TXD_CMD_DEXT |
 				   IXGBE_ADVTXD_DTYP_CTXT);
 
-		if (skb->protocol == htons(ETH_P_IP))
+		if (protocol == htons(ETH_P_IP))
 			type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
 		type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
 		context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
@@ -5906,16 +6193,10 @@ static int ixgbe_tso(struct ixgbe_adapter *adapter,
 	return false;
 }
 
-static u32 ixgbe_psum(struct ixgbe_adapter *adapter, struct sk_buff *skb)
+static u32 ixgbe_psum(struct ixgbe_adapter *adapter, struct sk_buff *skb,
+		      __be16 protocol)
 {
 	u32 rtn = 0;
-	__be16 protocol;
-
-	if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
-		protocol = ((const struct vlan_ethhdr *)skb->data)->
-					h_vlan_encapsulated_proto;
-	else
-		protocol = skb->protocol;
 
 	switch (protocol) {
 	case cpu_to_be16(ETH_P_IP):
@@ -5943,7 +6224,7 @@ static u32 ixgbe_psum(struct ixgbe_adapter *adapter, struct sk_buff *skb)
 	default:
 		if (unlikely(net_ratelimit()))
 			e_warn(probe, "partial checksum but proto=%x!\n",
-			       skb->protocol);
+			       protocol);
 		break;
 	}
 
@@ -5952,7 +6233,8 @@ static u32 ixgbe_psum(struct ixgbe_adapter *adapter, struct sk_buff *skb)
 
 static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 			  struct ixgbe_ring *tx_ring,
-			  struct sk_buff *skb, u32 tx_flags)
+			  struct sk_buff *skb, u32 tx_flags,
+			  __be16 protocol)
 {
 	struct ixgbe_adv_tx_context_desc *context_desc;
 	unsigned int i;
@@ -5981,7 +6263,7 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 				    IXGBE_ADVTXD_DTYP_CTXT);
 
 		if (skb->ip_summed == CHECKSUM_PARTIAL)
-			type_tucmd_mlhl |= ixgbe_psum(adapter, skb);
+			type_tucmd_mlhl |= ixgbe_psum(adapter, skb, protocol);
 
 		context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
 		/* use index zero for tx checksum offload */
@@ -6004,15 +6286,17 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
 static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 			struct ixgbe_ring *tx_ring,
 			struct sk_buff *skb, u32 tx_flags,
-			unsigned int first)
+			unsigned int first, const u8 hdr_len)
 {
-	struct pci_dev *pdev = adapter->pdev;
+	struct device *dev = tx_ring->dev;
 	struct ixgbe_tx_buffer *tx_buffer_info;
 	unsigned int len;
 	unsigned int total = skb->len;
 	unsigned int offset = 0, size, count = 0, i;
 	unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
 	unsigned int f;
+	unsigned int bytecount = skb->len;
+	u16 gso_segs = 1;
 
 	i = tx_ring->next_to_use;
 
@@ -6027,10 +6311,10 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 
 		tx_buffer_info->length = size;
 		tx_buffer_info->mapped_as_page = false;
-		tx_buffer_info->dma = dma_map_single(&pdev->dev,
+		tx_buffer_info->dma = dma_map_single(dev,
 						     skb->data + offset,
 						     size, DMA_TO_DEVICE);
-		if (dma_mapping_error(&pdev->dev, tx_buffer_info->dma))
+		if (dma_mapping_error(dev, tx_buffer_info->dma))
 			goto dma_error;
 		tx_buffer_info->time_stamp = jiffies;
 		tx_buffer_info->next_to_watch = i;
@@ -6063,12 +6347,12 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 			size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
 
 			tx_buffer_info->length = size;
-			tx_buffer_info->dma = dma_map_page(&adapter->pdev->dev,
+			tx_buffer_info->dma = dma_map_page(dev,
 							   frag->page,
 							   offset, size,
 							   DMA_TO_DEVICE);
 			tx_buffer_info->mapped_as_page = true;
-			if (dma_mapping_error(&pdev->dev, tx_buffer_info->dma))
+			if (dma_mapping_error(dev, tx_buffer_info->dma))
 				goto dma_error;
 			tx_buffer_info->time_stamp = jiffies;
 			tx_buffer_info->next_to_watch = i;
@@ -6082,6 +6366,19 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
 			break;
 	}
 
+	if (tx_flags & IXGBE_TX_FLAGS_TSO)
+		gso_segs = skb_shinfo(skb)->gso_segs;
+#ifdef IXGBE_FCOE
+	/* adjust for FCoE Sequence Offload */
+	else if (tx_flags & IXGBE_TX_FLAGS_FSO)
+		gso_segs = DIV_ROUND_UP(skb->len - hdr_len,
+					skb_shinfo(skb)->gso_size);
+#endif /* IXGBE_FCOE */
+	bytecount += (gso_segs - 1) * hdr_len;
+
+	/* multiply data chunks by size of headers */
+	tx_ring->tx_buffer_info[i].bytecount = bytecount;
+	tx_ring->tx_buffer_info[i].gso_segs = gso_segs;
 	tx_ring->tx_buffer_info[i].skb = skb;
 	tx_ring->tx_buffer_info[first].next_to_watch = i;
 
@@ -6103,14 +6400,13 @@ dma_error:
 			i += tx_ring->count;
 		i--;
 		tx_buffer_info = &tx_ring->tx_buffer_info[i];
-		ixgbe_unmap_and_free_tx_resource(adapter, tx_buffer_info);
+		ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
 	}
 
 	return 0;
 }
 
-static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
-			   struct ixgbe_ring *tx_ring,
+static void ixgbe_tx_queue(struct ixgbe_ring *tx_ring,
 			   int tx_flags, int count, u32 paylen, u8 hdr_len)
 {
 	union ixgbe_adv_tx_desc *tx_desc = NULL;
@@ -6175,60 +6471,46 @@ static void ixgbe_tx_queue(struct ixgbe_adapter *adapter,
 	wmb();
 
 	tx_ring->next_to_use = i;
-	writel(i, adapter->hw.hw_addr + tx_ring->tail);
+	writel(i, tx_ring->tail);
 }
 
 static void ixgbe_atr(struct ixgbe_adapter *adapter, struct sk_buff *skb,
-		      int queue, u32 tx_flags)
+		      u8 queue, u32 tx_flags, __be16 protocol)
 {
 	struct ixgbe_atr_input atr_input;
-	struct tcphdr *th;
 	struct iphdr *iph = ip_hdr(skb);
 	struct ethhdr *eth = (struct ethhdr *)skb->data;
-	u16 vlan_id, src_port, dst_port, flex_bytes;
-	u32 src_ipv4_addr, dst_ipv4_addr;
-	u8 l4type = 0;
+	struct tcphdr *th;
+	u16 vlan_id;
 
-	/* Right now, we support IPv4 only */
-	if (skb->protocol != htons(ETH_P_IP))
-		return;
-	/* check if we're UDP or TCP */
-	if (iph->protocol == IPPROTO_TCP) {
-		th = tcp_hdr(skb);
-		src_port = th->source;
-		dst_port = th->dest;
-		l4type |= IXGBE_ATR_L4TYPE_TCP;
-		/* l4type IPv4 type is 0, no need to assign */
-	} else {
-		/* Unsupported L4 header, just bail here */
+	/* Right now, we support IPv4 w/ TCP only */
+	if (protocol != htons(ETH_P_IP) ||
+	    iph->protocol != IPPROTO_TCP)
 		return;
-	}
 
 	memset(&atr_input, 0, sizeof(struct ixgbe_atr_input));
 
 	vlan_id = (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK) >>
 		   IXGBE_TX_FLAGS_VLAN_SHIFT;
-	src_ipv4_addr = iph->saddr;
-	dst_ipv4_addr = iph->daddr;
-	flex_bytes = eth->h_proto;
+
+	th = tcp_hdr(skb);
 
 	ixgbe_atr_set_vlan_id_82599(&atr_input, vlan_id);
-	ixgbe_atr_set_src_port_82599(&atr_input, dst_port);
-	ixgbe_atr_set_dst_port_82599(&atr_input, src_port);
-	ixgbe_atr_set_flex_byte_82599(&atr_input, flex_bytes);
-	ixgbe_atr_set_l4type_82599(&atr_input, l4type);
+	ixgbe_atr_set_src_port_82599(&atr_input, th->dest);
+	ixgbe_atr_set_dst_port_82599(&atr_input, th->source);
+	ixgbe_atr_set_flex_byte_82599(&atr_input, eth->h_proto);
+	ixgbe_atr_set_l4type_82599(&atr_input, IXGBE_ATR_L4TYPE_TCP);
 	/* src and dst are inverted, think how the receiver sees them */
-	ixgbe_atr_set_src_ipv4_82599(&atr_input, dst_ipv4_addr);
-	ixgbe_atr_set_dst_ipv4_82599(&atr_input, src_ipv4_addr);
+	ixgbe_atr_set_src_ipv4_82599(&atr_input, iph->daddr);
+	ixgbe_atr_set_dst_ipv4_82599(&atr_input, iph->saddr);
 
 	/* This assumes the Rx queue and Tx queue are bound to the same CPU */
 	ixgbe_fdir_add_signature_filter_82599(&adapter->hw, &atr_input, queue);
 }
 
-static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
-				 struct ixgbe_ring *tx_ring, int size)
+static int __ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, int size)
 {
-	netif_stop_subqueue(netdev, tx_ring->queue_index);
+	netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
 	/* Herbert's original patch had:
 	 *  smp_mb__after_netif_stop_queue();
 	 * but since that doesn't exist yet, just open code it. */
@@ -6240,27 +6522,29 @@ static int __ixgbe_maybe_stop_tx(struct net_device *netdev,
 		return -EBUSY;
 
 	/* A reprieve! - use start_queue because it doesn't call schedule */
-	netif_start_subqueue(netdev, tx_ring->queue_index);
-	++tx_ring->restart_queue;
+	netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
+	++tx_ring->tx_stats.restart_queue;
 	return 0;
 }
 
-static int ixgbe_maybe_stop_tx(struct net_device *netdev,
-			      struct ixgbe_ring *tx_ring, int size)
+static int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, int size)
 {
 	if (likely(IXGBE_DESC_UNUSED(tx_ring) >= size))
 		return 0;
-	return __ixgbe_maybe_stop_tx(netdev, tx_ring, size);
+	return __ixgbe_maybe_stop_tx(tx_ring, size);
 }
 
 static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	int txq = smp_processor_id();
-
 #ifdef IXGBE_FCOE
-	if ((skb->protocol == htons(ETH_P_FCOE)) ||
-	    (skb->protocol == htons(ETH_P_FIP))) {
+	__be16 protocol;
+
+	protocol = vlan_get_protocol(skb);
+
+	if ((protocol == htons(ETH_P_FCOE)) ||
+	    (protocol == htons(ETH_P_FIP))) {
 		if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
 			txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
 			txq += adapter->ring_feature[RING_F_FCOE].mask;
@@ -6292,10 +6576,11 @@ static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
 	return skb_tx_hash(dev, skb);
 }
 
-netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev,
+netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
 			  struct ixgbe_adapter *adapter,
 			  struct ixgbe_ring *tx_ring)
 {
+	struct net_device *netdev = tx_ring->netdev;
 	struct netdev_queue *txq;
 	unsigned int first;
 	unsigned int tx_flags = 0;
@@ -6303,6 +6588,9 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 	int tso;
 	int count = 0;
 	unsigned int f;
+	__be16 protocol;
+
+	protocol = vlan_get_protocol(skb);
 
 	if (vlan_tx_tag_present(skb)) {
 		tx_flags |= vlan_tx_tag_get(skb);
@@ -6323,8 +6611,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 	/* for FCoE with DCB, we force the priority to what
 	 * was specified by the switch */
 	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED &&
-	    (skb->protocol == htons(ETH_P_FCOE) ||
-	     skb->protocol == htons(ETH_P_FIP))) {
+	    (protocol == htons(ETH_P_FCOE) ||
+	     protocol == htons(ETH_P_FIP))) {
 #ifdef CONFIG_IXGBE_DCB
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
 			tx_flags &= ~(IXGBE_TX_FLAGS_VLAN_PRIO_MASK
@@ -6334,7 +6622,7 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 		}
 #endif
 		/* flag for FCoE offloads */
-		if (skb->protocol == htons(ETH_P_FCOE))
+		if (protocol == htons(ETH_P_FCOE))
 			tx_flags |= IXGBE_TX_FLAGS_FCOE;
 	}
 #endif
@@ -6350,8 +6638,8 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 	for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
 		count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
 
-	if (ixgbe_maybe_stop_tx(netdev, tx_ring, count)) {
-		adapter->tx_busy++;
+	if (ixgbe_maybe_stop_tx(tx_ring, count)) {
+		tx_ring->tx_stats.tx_busy++;
 		return NETDEV_TX_BUSY;
 	}
 
@@ -6368,9 +6656,10 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 			tx_flags |= IXGBE_TX_FLAGS_FSO;
 #endif /* IXGBE_FCOE */
 	} else {
-		if (skb->protocol == htons(ETH_P_IP))
+		if (protocol == htons(ETH_P_IP))
 			tx_flags |= IXGBE_TX_FLAGS_IPV4;
-		tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
+		tso = ixgbe_tso(adapter, tx_ring, skb, tx_flags, &hdr_len,
+				protocol);
 		if (tso < 0) {
 			dev_kfree_skb_any(skb);
 			return NETDEV_TX_OK;
@@ -6378,30 +6667,30 @@ netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, struct net_device *netdev
 
 		if (tso)
 			tx_flags |= IXGBE_TX_FLAGS_TSO;
-		else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags) &&
+		else if (ixgbe_tx_csum(adapter, tx_ring, skb, tx_flags,
+				       protocol) &&
 			 (skb->ip_summed == CHECKSUM_PARTIAL))
 			tx_flags |= IXGBE_TX_FLAGS_CSUM;
 	}
 
-	count = ixgbe_tx_map(adapter, tx_ring, skb, tx_flags, first);
+	count = ixgbe_tx_map(adapter, tx_ring, skb, tx_flags, first, hdr_len);
 	if (count) {
 		/* add the ATR filter if ATR is on */
 		if (tx_ring->atr_sample_rate) {
 			++tx_ring->atr_count;
 			if ((tx_ring->atr_count >= tx_ring->atr_sample_rate) &&
-			     test_bit(__IXGBE_FDIR_INIT_DONE,
-				      &tx_ring->reinit_state)) {
+			     test_bit(__IXGBE_TX_FDIR_INIT_DONE,
+				      &tx_ring->state)) {
 				ixgbe_atr(adapter, skb, tx_ring->queue_index,
-					  tx_flags);
+					  tx_flags, protocol);
 				tx_ring->atr_count = 0;
 			}
 		}
 		txq = netdev_get_tx_queue(netdev, tx_ring->queue_index);
 		txq->tx_bytes += skb->len;
 		txq->tx_packets++;
-		ixgbe_tx_queue(adapter, tx_ring, tx_flags, count, skb->len,
-			       hdr_len);
-		ixgbe_maybe_stop_tx(netdev, tx_ring, DESC_NEEDED);
+		ixgbe_tx_queue(tx_ring, tx_flags, count, skb->len, hdr_len);
+		ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED);
 
 	} else {
 		dev_kfree_skb_any(skb);
@@ -6418,7 +6707,7 @@ static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netd
 	struct ixgbe_ring *tx_ring;
 
 	tx_ring = adapter->tx_ring[skb->queue_mapping];
-	return ixgbe_xmit_frame_ring(skb, netdev, adapter, tx_ring);
+	return ixgbe_xmit_frame_ring(skb, adapter, tx_ring);
 }
 
 /**
@@ -6559,20 +6848,23 @@ static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev,
 
 	/* accurate rx/tx bytes/packets stats */
 	dev_txq_stats_fold(netdev, stats);
+	rcu_read_lock();
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct ixgbe_ring *ring = adapter->rx_ring[i];
+		struct ixgbe_ring *ring = ACCESS_ONCE(adapter->rx_ring[i]);
 		u64 bytes, packets;
 		unsigned int start;
 
-		do {
-			start = u64_stats_fetch_begin_bh(&ring->syncp);
-			packets = ring->stats.packets;
-			bytes   = ring->stats.bytes;
-		} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
-		stats->rx_packets += packets;
-		stats->rx_bytes   += bytes;
+		if (ring) {
+			do {
+				start = u64_stats_fetch_begin_bh(&ring->syncp);
+				packets = ring->stats.packets;
+				bytes   = ring->stats.bytes;
+			} while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+			stats->rx_packets += packets;
+			stats->rx_bytes   += bytes;
+		}
 	}
-
+	rcu_read_unlock();
 	/* following stats updated by ixgbe_watchdog_task() */
 	stats->multicast	= netdev->stats.multicast;
 	stats->rx_errors	= netdev->stats.rx_errors;
@@ -6621,7 +6913,7 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
 	struct ixgbe_hw *hw = &adapter->hw;
 	int err;
 
-	if (hw->mac.type != ixgbe_mac_82599EB || !max_vfs)
+	if (hw->mac.type == ixgbe_mac_82598EB || !max_vfs)
 		return;
 
 	/* The 82599 supports up to 64 VFs per physical function
@@ -6687,11 +6979,12 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
 	static int cards_found;
 	int i, err, pci_using_dac;
+	u8 part_str[IXGBE_PBANUM_LENGTH];
 	unsigned int indices = num_possible_cpus();
 #ifdef IXGBE_FCOE
 	u16 device_caps;
 #endif
-	u32 part_num, eec;
+	u32 eec;
 
 	/* Catch broken hardware that put the wrong VF device ID in
 	 * the PCIe SR-IOV capability.
@@ -6754,8 +7047,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
 	SET_NETDEV_DEV(netdev, &pdev->dev);
 
-	pci_set_drvdata(pdev, netdev);
 	adapter = netdev_priv(netdev);
+	pci_set_drvdata(pdev, adapter);
 
 	adapter->netdev = netdev;
 	adapter->pdev = pdev;
@@ -6778,7 +7071,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	netdev->netdev_ops = &ixgbe_netdev_ops;
 	ixgbe_set_ethtool_ops(netdev);
 	netdev->watchdog_timeo = 5 * HZ;
-	strcpy(netdev->name, pci_name(pdev));
+	strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
 
 	adapter->bd_number = cards_found;
 
@@ -6828,8 +7121,14 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		goto err_sw_init;
 
 	/* Make it possible the adapter to be woken up via WOL */
-	if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+	switch (adapter->hw.mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+		break;
+	default:
+		break;
+	}
 
 	/*
 	 * If there is a fan on this device and it has failed log the
@@ -6937,8 +7236,11 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		goto err_eeprom;
 	}
 
-	/* power down the optics */
-	if (hw->phy.multispeed_fiber)
+	/* power down the optics for multispeed fiber and 82599 SFP+ fiber */
+	if (hw->mac.ops.disable_tx_laser &&
+	    ((hw->phy.multispeed_fiber) ||
+	     ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+	      (hw->mac.type == ixgbe_mac_82599EB))))
 		hw->mac.ops.disable_tx_laser(hw);
 
 	init_timer(&adapter->watchdog_timer);
@@ -6953,6 +7255,18 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		goto err_sw_init;
 
 	switch (pdev->device) {
+	case IXGBE_DEV_ID_82599_SFP:
+		/* Only this subdevice supports WOL */
+		if (pdev->subsystem_device == IXGBE_SUBDEV_ID_82599_SFP)
+			adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
+			                IXGBE_WUFC_MC | IXGBE_WUFC_BC);
+		break;
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+		/* All except this subdevice support WOL */
+		if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
+			adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
+			                IXGBE_WUFC_MC | IXGBE_WUFC_BC);
+		break;
 	case IXGBE_DEV_ID_82599_KX4:
 		adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
 				IXGBE_WUFC_MC | IXGBE_WUFC_BC);
@@ -6976,16 +7290,17 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		    hw->bus.width == ixgbe_bus_width_pcie_x1 ? "Width x1" :
 		    "Unknown"),
 		   netdev->dev_addr);
-	ixgbe_read_pba_num_generic(hw, &part_num);
+
+	err = ixgbe_read_pba_string_generic(hw, part_str, IXGBE_PBANUM_LENGTH);
+	if (err)
+		strncpy(part_str, "Unknown", IXGBE_PBANUM_LENGTH);
 	if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
-		e_dev_info("MAC: %d, PHY: %d, SFP+: %d, "
-			   "PBA No: %06x-%03x\n",
+		e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n",
 			   hw->mac.type, hw->phy.type, hw->phy.sfp_type,
-			   (part_num >> 8), (part_num & 0xff));
+		           part_str);
 	else
-		e_dev_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
-			   hw->mac.type, hw->phy.type,
-			   (part_num >> 8), (part_num & 0xff));
+		e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n",
+			   hw->mac.type, hw->phy.type, part_str);
 
 	if (hw->bus.width <= ixgbe_bus_width_pcie_x4) {
 		e_dev_warn("PCI-Express bandwidth available for this card is "
@@ -7078,17 +7393,19 @@ err_dma:
  **/
 static void __devexit ixgbe_remove(struct pci_dev *pdev)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
 
 	set_bit(__IXGBE_DOWN, &adapter->state);
-	/* clear the module not found bit to make sure the worker won't
-	 * reschedule
+
+	/*
+	 * The timers may be rescheduled, so explicitly disable them
+	 * from being rescheduled.
 	 */
 	clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
 	del_timer_sync(&adapter->watchdog_timer);
-
 	del_timer_sync(&adapter->sfp_timer);
+
 	cancel_work_sync(&adapter->watchdog_task);
 	cancel_work_sync(&adapter->sfp_task);
 	cancel_work_sync(&adapter->multispeed_fiber_task);
@@ -7096,7 +7413,8 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 	if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
 	    adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
 		cancel_work_sync(&adapter->fdir_reinit_task);
-	flush_scheduled_work();
+	if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
+		cancel_work_sync(&adapter->check_overtemp_task);
 
 #ifdef CONFIG_IXGBE_DCA
 	if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
@@ -7149,8 +7467,8 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
 						pci_channel_state_t state)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
 
 	netif_device_detach(netdev);
 
@@ -7173,8 +7491,7 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
  */
 static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
 	pci_ers_result_t result;
 	int err;
 
@@ -7212,8 +7529,8 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
  */
 static void ixgbe_io_resume(struct pci_dev *pdev)
 {
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+	struct net_device *netdev = adapter->netdev;
 
 	if (netif_running(netdev)) {
 		if (ixgbe_up(adapter)) {
@@ -7278,6 +7595,7 @@ static void __exit ixgbe_exit_module(void)
 	dca_unregister_notify(&dca_notifier);
 #endif
 	pci_unregister_driver(&ixgbe_driver);
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 
 #ifdef CONFIG_IXGBE_DCA
diff --git a/drivers/net/ixgbe/ixgbe_mbx.c b/drivers/net/ixgbe/ixgbe_mbx.c
index 471f0f2cdb9..ea82c5a1cd3 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.c
+++ b/drivers/net/ixgbe/ixgbe_mbx.c
@@ -319,8 +319,16 @@ static s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number)
 	u32 vflre = 0;
 	s32 ret_val = IXGBE_ERR_MBX;
 
-	if (hw->mac.type == ixgbe_mac_82599EB)
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
 		vflre = IXGBE_READ_REG(hw, IXGBE_VFLRE(reg_offset));
+		break;
+	case ixgbe_mac_X540:
+		vflre = IXGBE_READ_REG(hw, IXGBE_VFLREC(reg_offset));
+		break;
+	default:
+		break;
+	}
 
 	if (vflre & (1 << vf_shift)) {
 		ret_val = 0;
@@ -439,22 +447,26 @@ void ixgbe_init_mbx_params_pf(struct ixgbe_hw *hw)
 {
 	struct ixgbe_mbx_info *mbx = &hw->mbx;
 
-	if (hw->mac.type != ixgbe_mac_82599EB)
-		return;
-
-	mbx->timeout = 0;
-	mbx->usec_delay = 0;
-
-	mbx->size = IXGBE_VFMAILBOX_SIZE;
-
-	mbx->stats.msgs_tx = 0;
-	mbx->stats.msgs_rx = 0;
-	mbx->stats.reqs = 0;
-	mbx->stats.acks = 0;
-	mbx->stats.rsts = 0;
+	switch (hw->mac.type) {
+	case ixgbe_mac_82599EB:
+	case ixgbe_mac_X540:
+		mbx->timeout = 0;
+		mbx->usec_delay = 0;
+
+		mbx->size = IXGBE_VFMAILBOX_SIZE;
+
+		mbx->stats.msgs_tx = 0;
+		mbx->stats.msgs_rx = 0;
+		mbx->stats.reqs = 0;
+		mbx->stats.acks = 0;
+		mbx->stats.rsts = 0;
+		break;
+	default:
+		break;
+	}
 }
 
-struct ixgbe_mbx_operations mbx_ops_82599 = {
+struct ixgbe_mbx_operations mbx_ops_generic = {
 	.read                   = ixgbe_read_mbx_pf,
 	.write                  = ixgbe_write_mbx_pf,
 	.read_posted            = ixgbe_read_posted_mbx,
diff --git a/drivers/net/ixgbe/ixgbe_mbx.h b/drivers/net/ixgbe/ixgbe_mbx.h
index 7e0d08ff5b5..3df9b159021 100644
--- a/drivers/net/ixgbe/ixgbe_mbx.h
+++ b/drivers/net/ixgbe/ixgbe_mbx.h
@@ -88,6 +88,6 @@ s32 ixgbe_check_for_ack(struct ixgbe_hw *, u16);
 s32 ixgbe_check_for_rst(struct ixgbe_hw *, u16);
 void ixgbe_init_mbx_params_pf(struct ixgbe_hw *);
 
-extern struct ixgbe_mbx_operations mbx_ops_82599;
+extern struct ixgbe_mbx_operations mbx_ops_generic;
 
 #endif /* _IXGBE_MBX_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 6c0d42e33f2..8f7123e8fc0 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -115,6 +115,9 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
 	case TN1010_PHY_ID:
 		phy_type = ixgbe_phy_tn;
 		break;
+	case X540_PHY_ID:
+		phy_type = ixgbe_phy_aq;
+		break;
 	case QT2022_PHY_ID:
 		phy_type = ixgbe_phy_qt;
 		break;
@@ -425,6 +428,39 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
 }
 
 /**
+ * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ */
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+                                               ixgbe_link_speed *speed,
+                                               bool *autoneg)
+{
+	s32 status = IXGBE_ERR_LINK_SETUP;
+	u16 speed_ability;
+
+	*speed = 0;
+	*autoneg = true;
+
+	status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
+	                              &speed_ability);
+
+	if (status == 0) {
+		if (speed_ability & MDIO_SPEED_10G)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (speed_ability & MDIO_PMA_SPEED_1000)
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		if (speed_ability & MDIO_PMA_SPEED_100)
+			*speed |= IXGBE_LINK_SPEED_100_FULL;
+	}
+
+	return status;
+}
+
+/**
  *  ixgbe_reset_phy_nl - Performs a PHY reset
  *  @hw: pointer to hardware structure
  **/
@@ -1378,6 +1414,22 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
 }
 
 /**
+ *  ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ *  @hw: pointer to hardware structure
+ *  @firmware_version: pointer to the PHY Firmware Version
+**/
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+                                           u16 *firmware_version)
+{
+	s32 status = 0;
+
+	status = hw->phy.ops.read_reg(hw, AQ_FW_REV, MDIO_MMD_VEND1,
+	                              firmware_version);
+
+	return status;
+}
+
+/**
  *  ixgbe_tn_check_overtemp - Checks if an overtemp occured.
  *  @hw: pointer to hardware structure
  *
diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h
index fb3898f12fc..e2c6b7eac64 100644
--- a/drivers/net/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ixgbe/ixgbe_phy.h
@@ -96,6 +96,9 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
                                        ixgbe_link_speed speed,
                                        bool autoneg,
                                        bool autoneg_wait_to_complete);
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+                                               ixgbe_link_speed *speed,
+                                               bool *autoneg);
 
 /* PHY specific */
 s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
@@ -103,6 +106,8 @@ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
                              bool *link_up);
 s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
                                        u16 *firmware_version);
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+                                           u16 *firmware_version);
 
 s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
 s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
diff --git a/drivers/net/ixgbe/ixgbe_sriov.c b/drivers/net/ixgbe/ixgbe_sriov.c
index 5428153af8f..47b15738b00 100644
--- a/drivers/net/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ixgbe/ixgbe_sriov.c
@@ -68,7 +68,7 @@ static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
 	 * addresses
 	 */
 	for (i = 0; i < entries; i++) {
-		vfinfo->vf_mc_hashes[i] = hash_list[i];;
+		vfinfo->vf_mc_hashes[i] = hash_list[i];
 	}
 
 	for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
@@ -178,8 +178,7 @@ static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
 int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
 {
 	unsigned char vf_mac_addr[6];
-	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
 	unsigned int vfn = (event_mask & 0x3f);
 
 	bool enable = ((event_mask & 0x10000000U) != 0);
@@ -216,6 +215,11 @@ static inline void ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
 	reg |= (reg | (1 << vf_shift));
 	IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
 
+	/* Enable counting of spoofed packets in the SSVPC register */
+	reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
+	reg |= (1 << vf_shift);
+	IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
+
 	ixgbe_vf_reset_event(adapter, vf);
 }
 
@@ -228,6 +232,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 	int entries;
 	u16 *hash_list;
 	int add, vid;
+	u8 *new_mac;
 
 	retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
 
@@ -245,15 +250,22 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 
 	if (msgbuf[0] == IXGBE_VF_RESET) {
 		unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
-		u8 *addr = (u8 *)(&msgbuf[1]);
+		new_mac = (u8 *)(&msgbuf[1]);
 		e_info(probe, "VF Reset msg received from vf %d\n", vf);
 		adapter->vfinfo[vf].clear_to_send = false;
 		ixgbe_vf_reset_msg(adapter, vf);
 		adapter->vfinfo[vf].clear_to_send = true;
 
+		if (is_valid_ether_addr(new_mac) &&
+		    !adapter->vfinfo[vf].pf_set_mac)
+			ixgbe_set_vf_mac(adapter, vf, vf_mac);
+		else
+			ixgbe_set_vf_mac(adapter,
+				 vf, adapter->vfinfo[vf].vf_mac_addresses);
+
 		/* reply to reset with ack and vf mac address */
 		msgbuf[0] = IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK;
-		memcpy(addr, vf_mac, IXGBE_ETH_LENGTH_OF_ADDRESS);
+		memcpy(new_mac, vf_mac, IXGBE_ETH_LENGTH_OF_ADDRESS);
 		/*
 		 * Piggyback the multicast filter type so VF can compute the
 		 * correct vectors
@@ -272,14 +284,16 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 
 	switch ((msgbuf[0] & 0xFFFF)) {
 	case IXGBE_VF_SET_MAC_ADDR:
-		{
-			u8 *new_mac = ((u8 *)(&msgbuf[1]));
-			if (is_valid_ether_addr(new_mac) &&
-			    !adapter->vfinfo[vf].pf_set_mac)
-				ixgbe_set_vf_mac(adapter, vf, new_mac);
-			else
-				ixgbe_set_vf_mac(adapter,
-				  vf, adapter->vfinfo[vf].vf_mac_addresses);
+		new_mac = ((u8 *)(&msgbuf[1]));
+		if (is_valid_ether_addr(new_mac) &&
+		    !adapter->vfinfo[vf].pf_set_mac) {
+			ixgbe_set_vf_mac(adapter, vf, new_mac);
+		} else if (memcmp(adapter->vfinfo[vf].vf_mac_addresses,
+				  new_mac, ETH_ALEN)) {
+			e_warn(drv, "VF %d attempted to override "
+			       "administratively set MAC address\nReload "
+			       "the VF driver to resume operations\n", vf);
+			retval = -1;
 		}
 		break;
 	case IXGBE_VF_SET_MULTICAST:
@@ -296,7 +310,15 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
 		add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
 		      >> IXGBE_VT_MSGINFO_SHIFT;
 		vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
-		retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
+		if (adapter->vfinfo[vf].pf_vlan) {
+			e_warn(drv, "VF %d attempted to override "
+			       "administratively set VLAN configuration\n"
+			       "Reload the VF driver to resume operations\n",
+			       vf);
+			retval = -1;
+		} else {
+			retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
+		}
 		break;
 	default:
 		e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
@@ -395,6 +417,7 @@ int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
 {
 	int err = 0;
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
 
 	if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
 		return -EINVAL;
@@ -403,7 +426,8 @@ int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
 		if (err)
 			goto out;
 		ixgbe_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
-		ixgbe_set_vmolr(&adapter->hw, vf, false);
+		ixgbe_set_vmolr(hw, vf, false);
+		hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
 		adapter->vfinfo[vf].pf_vlan = vlan;
 		adapter->vfinfo[vf].pf_qos = qos;
 		dev_info(&adapter->pdev->dev,
@@ -420,7 +444,8 @@ int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
 		err = ixgbe_set_vf_vlan(adapter, false,
 					adapter->vfinfo[vf].pf_vlan, vf);
 		ixgbe_set_vmvir(adapter, vlan, vf);
-		ixgbe_set_vmolr(&adapter->hw, vf, true);
+		ixgbe_set_vmolr(hw, vf, true);
+		hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
 		adapter->vfinfo[vf].pf_vlan = 0;
 		adapter->vfinfo[vf].pf_qos = 0;
        }
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index d3cc6ce7c97..446f3467d3c 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -54,9 +54,14 @@
 #define IXGBE_DEV_ID_82599_T3_LOM        0x151C
 #define IXGBE_DEV_ID_82599_CX4           0x10F9
 #define IXGBE_DEV_ID_82599_SFP           0x10FB
+#define IXGBE_DEV_ID_82599_BACKPLANE_FCOE       0x152a
+#define IXGBE_DEV_ID_82599_SFP_FCOE      0x1529
+#define IXGBE_SUBDEV_ID_82599_SFP        0x11A9
 #define IXGBE_DEV_ID_82599_SFP_EM        0x1507
 #define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
 #define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
+#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ  0x000C
+#define IXGBE_DEV_ID_X540T               0x1528
 
 /* General Registers */
 #define IXGBE_CTRL      0x00000
@@ -225,6 +230,7 @@
 #define IXGBE_VT_CTL    0x051B0
 #define IXGBE_VFRE(_i)  (0x051E0 + ((_i) * 4))
 #define IXGBE_VFTE(_i)  (0x08110 + ((_i) * 4))
+#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4))
 #define IXGBE_QDE       0x2F04
 #define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */
 #define IXGBE_UTA(_i)   (0x0F400 + ((_i) * 4))
@@ -279,7 +285,8 @@
 #define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40))
 #define IXGBE_DTXCTL    0x07E00
 
-#define IXGBE_DMATXCTL  0x04A80
+#define IXGBE_DMATXCTL      0x04A80
+#define IXGBE_PFVFSPOOF(_i) (0x08200 + ((_i) * 4)) /* 8 of these 0 - 7 */
 #define IXGBE_PFDTXGSWC     0x08220
 #define IXGBE_DTXMXSZRQ     0x08100
 #define IXGBE_DTXTCPFLGL    0x04A88
@@ -293,6 +300,13 @@
 #define IXGBE_DMATXCTL_VT_SHIFT 16  /* VLAN EtherType */
 
 #define IXGBE_PFDTXGSWC_VT_LBEN 0x1 /* Local L2 VT switch enable */
+
+/* Anti-spoofing defines */
+#define IXGBE_SPOOF_MACAS_MASK          0xFF
+#define IXGBE_SPOOF_VLANAS_MASK         0xFF00
+#define IXGBE_SPOOF_VLANAS_SHIFT        8
+#define IXGBE_PFVFSPOOF_REG_COUNT       8
+
 #define IXGBE_DCA_TXCTRL(_i)    (0x07200 + ((_i) * 4)) /* 16 of these (0-15) */
 /* Tx DCA Control register : 128 of these (0-127) */
 #define IXGBE_DCA_TXCTRL_82599(_i)  (0x0600C + ((_i) * 0x40))
@@ -994,8 +1008,10 @@
 /* PHY IDs*/
 #define TN1010_PHY_ID    0x00A19410
 #define TNX_FW_REV       0xB
+#define X540_PHY_ID      0x01540200
 #define QT2022_PHY_ID    0x0043A400
 #define ATH_PHY_ID       0x03429050
+#define AQ_FW_REV        0x20
 
 /* PHY Types */
 #define IXGBE_M88E1145_E_PHY_ID  0x01410CD0
@@ -1463,6 +1479,8 @@
 #define IXGBE_ANLP1_PAUSE               0x0C00
 #define IXGBE_ANLP1_SYM_PAUSE           0x0400
 #define IXGBE_ANLP1_ASM_PAUSE           0x0800
+#define IXGBE_ANLP1_AN_STATE_MASK       0x000f0000
+
 
 /* SW Semaphore Register bitmasks */
 #define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
@@ -1491,6 +1509,7 @@
 #define IXGBE_EEC_PRES      0x00000100 /* EEPROM Present */
 #define IXGBE_EEC_ARD       0x00000200 /* EEPROM Auto Read Done */
 #define IXGBE_EEC_FLUP      0x00800000 /* Flash update command */
+#define IXGBE_EEC_SEC1VAL   0x02000000 /* Sector 1 Valid */
 #define IXGBE_EEC_FLUDONE   0x04000000 /* Flash update done */
 /* EEPROM Addressing bits based on type (0-small, 1-large) */
 #define IXGBE_EEC_ADDR_SIZE 0x00000400
@@ -1500,12 +1519,18 @@
 #define IXGBE_EEPROM_WORD_SIZE_SHIFT  6
 #define IXGBE_EEPROM_OPCODE_BITS      8
 
+/* Part Number String Length */
+#define IXGBE_PBANUM_LENGTH 11
+
 /* Checksum and EEPROM pointers */
+#define IXGBE_PBANUM_PTR_GUARD  0xFAFA
 #define IXGBE_EEPROM_CHECKSUM   0x3F
 #define IXGBE_EEPROM_SUM        0xBABA
 #define IXGBE_PCIE_ANALOG_PTR   0x03
 #define IXGBE_ATLAS0_CONFIG_PTR 0x04
+#define IXGBE_PHY_PTR           0x04
 #define IXGBE_ATLAS1_CONFIG_PTR 0x05
+#define IXGBE_OPTION_ROM_PTR    0x05
 #define IXGBE_PCIE_GENERAL_PTR  0x06
 #define IXGBE_PCIE_CONFIG0_PTR  0x07
 #define IXGBE_PCIE_CONFIG1_PTR  0x08
@@ -2113,6 +2138,14 @@ typedef u32 ixgbe_physical_layer;
 #define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
 #define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000
 
+/* Flow Control Macros */
+#define PAUSE_RTT	8
+#define PAUSE_MTU(MTU)	((MTU + 1024 - 1) / 1024)
+
+#define FC_HIGH_WATER(MTU) ((((PAUSE_RTT + PAUSE_MTU(MTU)) * 144) + 99) / 100 +\
+				PAUSE_MTU(MTU))
+#define FC_LOW_WATER(MTU)  (2 * (2 * PAUSE_MTU(MTU) + PAUSE_RTT))
+
 /* Software ATR hash keys */
 #define IXGBE_ATR_BUCKET_HASH_KEY    0xE214AD3D
 #define IXGBE_ATR_SIGNATURE_HASH_KEY 0x14364D17
@@ -2164,6 +2197,7 @@ struct ixgbe_atr_input_masks {
 enum ixgbe_eeprom_type {
 	ixgbe_eeprom_uninitialized = 0,
 	ixgbe_eeprom_spi,
+	ixgbe_flash,
 	ixgbe_eeprom_none /* No NVM support */
 };
 
@@ -2171,12 +2205,14 @@ enum ixgbe_mac_type {
 	ixgbe_mac_unknown = 0,
 	ixgbe_mac_82598EB,
 	ixgbe_mac_82599EB,
+	ixgbe_mac_X540,
 	ixgbe_num_macs
 };
 
 enum ixgbe_phy_type {
 	ixgbe_phy_unknown = 0,
 	ixgbe_phy_tn,
+	ixgbe_phy_aq,
 	ixgbe_phy_cu_unknown,
 	ixgbe_phy_qt,
 	ixgbe_phy_xaui,
@@ -2405,6 +2441,7 @@ struct ixgbe_eeprom_operations {
 	s32 (*write)(struct ixgbe_hw *, u16, u16);
 	s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
 	s32 (*update_checksum)(struct ixgbe_hw *);
+	u16 (*calc_checksum)(struct ixgbe_hw *);
 };
 
 struct ixgbe_mac_operations {
@@ -2454,6 +2491,8 @@ struct ixgbe_mac_operations {
 	s32 (*clear_vfta)(struct ixgbe_hw *);
 	s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
 	s32 (*init_uta_tables)(struct ixgbe_hw *);
+	void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int);
+	void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int);
 
 	/* Flow Control */
 	s32 (*fc_enable)(struct ixgbe_hw *, s32);
@@ -2574,6 +2613,7 @@ struct ixgbe_hw {
 	u16				subsystem_vendor_id;
 	u8				revision_id;
 	bool				adapter_stopped;
+	bool				force_full_reset;
 };
 
 struct ixgbe_info {
@@ -2614,6 +2654,9 @@ struct ixgbe_info {
 #define IXGBE_ERR_NO_SPACE                      -25
 #define IXGBE_ERR_OVERTEMP                      -26
 #define IXGBE_ERR_RAR_INDEX                     -27
+#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE        -30
+#define IXGBE_ERR_PBA_SECTION                   -31
+#define IXGBE_ERR_INVALID_ARGUMENT              -32
 #define IXGBE_NOT_IMPLEMENTED                   0x7FFFFFFF
 
 #endif /* _IXGBE_TYPE_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c
new file mode 100644
index 00000000000..3a8923993ce
--- /dev/null
+++ b/drivers/net/ixgbe/ixgbe_x540.c
@@ -0,0 +1,724 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2010 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+//#include "ixgbe_mbx.h"
+
+#define IXGBE_X540_MAX_TX_QUEUES 128
+#define IXGBE_X540_MAX_RX_QUEUES 128
+#define IXGBE_X540_RAR_ENTRIES   128
+#define IXGBE_X540_MC_TBL_SIZE   128
+#define IXGBE_X540_VFT_TBL_SIZE  128
+
+static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
+static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
+static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask);
+static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask);
+static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
+static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
+
+static enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
+{
+	return ixgbe_media_type_copper;
+}
+
+static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	/* Call PHY identify routine to get the phy type */
+	ixgbe_identify_phy_generic(hw);
+
+	mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
+	mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ **/
+static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
+                                     ixgbe_link_speed speed, bool autoneg,
+                                     bool autoneg_wait_to_complete)
+{
+	return hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+	                                    autoneg_wait_to_complete);
+}
+
+/**
+ *  ixgbe_reset_hw_X540 - Perform hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks
+ *  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ *  reset.
+ **/
+static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
+{
+	ixgbe_link_speed link_speed;
+	s32 status = 0;
+	u32 ctrl;
+	u32 ctrl_ext;
+	u32 reset_bit;
+	u32 i;
+	u32 autoc;
+	u32 autoc2;
+	bool link_up = false;
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	hw->mac.ops.stop_adapter(hw);
+
+	/*
+	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+	 * access and verify no pending requests before reset
+	 */
+	status = ixgbe_disable_pcie_master(hw);
+	if (status != 0) {
+		status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+		hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
+	}
+
+	/*
+	 * Issue global reset to the MAC.  Needs to be SW reset if link is up.
+	 * If link reset is used when link is up, it might reset the PHY when
+	 * mng is using it.  If link is down or the flag to force full link
+	 * reset is set, then perform link reset.
+	 */
+	if (hw->force_full_reset) {
+		reset_bit = IXGBE_CTRL_LNK_RST;
+	} else {
+		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+		if (!link_up)
+			reset_bit = IXGBE_CTRL_LNK_RST;
+		else
+			reset_bit = IXGBE_CTRL_RST;
+	}
+
+	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear indicating reset is complete */
+	for (i = 0; i < 10; i++) {
+		udelay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST))
+			break;
+	}
+	if (ctrl & IXGBE_CTRL_RST) {
+		status = IXGBE_ERR_RESET_FAILED;
+		hw_dbg(hw, "Reset polling failed to complete.\n");
+	}
+
+	/* Clear PF Reset Done bit so PF/VF Mail Ops can work */
+	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+	ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+
+	msleep(50);
+
+	/* Set the Rx packet buffer size. */
+	IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/*
+	 * Store the original AUTOC/AUTOC2 values if they have not been
+	 * stored off yet.  Otherwise restore the stored original
+	 * values since the reset operation sets back to defaults.
+	 */
+	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	if (hw->mac.orig_link_settings_stored == false) {
+		hw->mac.orig_autoc = autoc;
+		hw->mac.orig_autoc2 = autoc2;
+		hw->mac.orig_link_settings_stored = true;
+	} else {
+		if (autoc != hw->mac.orig_autoc)
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
+			                IXGBE_AUTOC_AN_RESTART));
+
+		if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
+		    (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
+			autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
+			autoc2 |= (hw->mac.orig_autoc2 &
+			           IXGBE_AUTOC2_UPPER_MASK);
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+		}
+	}
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/* Store the permanent SAN mac address */
+	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+	/* Add the SAN MAC address to the RAR only if it's a valid address */
+	if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+		hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+		                    hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+		/* Reserve the last RAR for the SAN MAC address */
+		hw->mac.num_rar_entries--;
+	}
+
+	/* Store the alternative WWNN/WWPN prefix */
+	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+	                           &hw->mac.wwpn_prefix);
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current configuration.
+ **/
+static u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
+{
+	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u16 ext_ability = 0;
+
+	hw->phy.ops.identify(hw);
+
+	hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
+			     &ext_ability);
+	if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+		physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+	if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+		physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+	if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+		physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+
+	return physical_layer;
+}
+
+/**
+ * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	u32 eec;
+	u16 eeprom_size;
+
+	if (eeprom->type == ixgbe_eeprom_uninitialized) {
+		eeprom->semaphore_delay = 10;
+		eeprom->type = ixgbe_flash;
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+		eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+		                    IXGBE_EEC_SIZE_SHIFT);
+		eeprom->word_size = 1 << (eeprom_size +
+		                          IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+		hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
+		        eeprom->type, eeprom->word_size);
+	}
+
+	return 0;
+}
+
+/**
+ * ixgbe_read_eerd_X540 - Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EERPOM
+ **/
+static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	s32 status;
+
+	if (ixgbe_acquire_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM) == 0)
+		status = ixgbe_read_eerd_generic(hw, offset, data);
+	else
+		status = IXGBE_ERR_SWFW_SYNC;
+
+	ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/**
+ * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of  word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	u32 eewr;
+	s32 status;
+
+	hw->eeprom.ops.init_params(hw);
+
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+		goto out;
+	}
+
+	eewr = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+	       (data << IXGBE_EEPROM_RW_REG_DATA) |
+	       IXGBE_EEPROM_RW_REG_START;
+
+	if (ixgbe_acquire_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM) == 0) {
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+		if (status != 0) {
+			hw_dbg(hw, "Eeprom write EEWR timed out\n");
+			goto out;
+		}
+
+		IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
+
+		status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+		if (status != 0) {
+			hw_dbg(hw, "Eeprom write EEWR timed out\n");
+			goto out;
+		}
+	} else {
+		status = IXGBE_ERR_SWFW_SYNC;
+	}
+
+out:
+	ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM);
+	return status;
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+	u16 i;
+	u16 j;
+	u16 checksum = 0;
+	u16 length = 0;
+	u16 pointer = 0;
+	u16 word = 0;
+
+	/* Include 0x0-0x3F in the checksum */
+	for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
+		if (hw->eeprom.ops.read(hw, i, &word) != 0) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			break;
+		}
+		checksum += word;
+	}
+
+	/*
+	 * Include all data from pointers 0x3, 0x6-0xE.  This excludes the
+	 * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+	 */
+	for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
+		if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+			continue;
+
+		if (hw->eeprom.ops.read(hw, i, &pointer) != 0) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			break;
+		}
+
+		/* Skip pointer section if the pointer is invalid. */
+		if (pointer == 0xFFFF || pointer == 0 ||
+		    pointer >= hw->eeprom.word_size)
+			continue;
+
+		if (hw->eeprom.ops.read(hw, pointer, &length) != 0) {
+			hw_dbg(hw, "EEPROM read failed\n");
+			break;
+		}
+
+		/* Skip pointer section if length is invalid. */
+		if (length == 0xFFFF || length == 0 ||
+		    (pointer + length) >= hw->eeprom.word_size)
+			continue;
+
+		for (j = pointer+1; j <= pointer+length; j++) {
+			if (hw->eeprom.ops.read(hw, j, &word) != 0) {
+				hw_dbg(hw, "EEPROM read failed\n");
+				break;
+			}
+			checksum += word;
+		}
+	}
+
+	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+	return checksum;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+	s32 status;
+
+	status = ixgbe_update_eeprom_checksum_generic(hw);
+
+	if (status)
+		status = ixgbe_update_flash_X540(hw);
+
+	return status;
+}
+
+/**
+ * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
+ *
+ * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
+ * EEPROM from shadow RAM to the flash device.
+ **/
+static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
+{
+	u32 flup;
+	s32 status = IXGBE_ERR_EEPROM;
+
+	status = ixgbe_poll_flash_update_done_X540(hw);
+	if (status == IXGBE_ERR_EEPROM) {
+		hw_dbg(hw, "Flash update time out\n");
+		goto out;
+	}
+
+	flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
+
+	status = ixgbe_poll_flash_update_done_X540(hw);
+	if (status)
+		hw_dbg(hw, "Flash update complete\n");
+	else
+		hw_dbg(hw, "Flash update time out\n");
+
+	if (hw->revision_id == 0) {
+		flup = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+		if (flup & IXGBE_EEC_SEC1VAL) {
+			flup |= IXGBE_EEC_FLUP;
+			IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
+		}
+
+		status = ixgbe_poll_flash_update_done_X540(hw);
+		if (status)
+			hw_dbg(hw, "Flash update complete\n");
+		else
+			hw_dbg(hw, "Flash update time out\n");
+
+	}
+out:
+	return status;
+}
+
+/**
+ * ixgbe_poll_flash_update_done_X540 - Poll flash update status
+ * @hw: pointer to hardware structure
+ *
+ * Polls the FLUDONE (bit 26) of the EEC Register to determine when the
+ * flash update is done.
+ **/
+static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u32 reg;
+	s32 status = IXGBE_ERR_EEPROM;
+
+	for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) {
+		reg = IXGBE_READ_REG(hw, IXGBE_EEC);
+		if (reg & IXGBE_EEC_FLUDONE) {
+			status = 0;
+			break;
+		}
+		udelay(5);
+	}
+	return status;
+}
+
+/**
+ * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore thought the SW_FW_SYNC register for
+ * the specified function (CSR, PHY0, PHY1, NVM, Flash)
+ **/
+static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+	u32 fwmask = mask << 5;
+	u32 hwmask = 0;
+	u32 timeout = 200;
+	u32 i;
+
+	if (swmask == IXGBE_GSSR_EEP_SM)
+		hwmask = IXGBE_GSSR_FLASH_SM;
+
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * SW NVM semaphore bit is used for access to all
+		 * SW_FW_SYNC bits (not just NVM)
+		 */
+		if (ixgbe_get_swfw_sync_semaphore(hw))
+			return IXGBE_ERR_SWFW_SYNC;
+
+		swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+		if (!(swfw_sync & (fwmask | swmask | hwmask))) {
+			swfw_sync |= swmask;
+			IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+			ixgbe_release_swfw_sync_semaphore(hw);
+			break;
+		} else {
+			/*
+			 * Firmware currently using resource (fwmask),
+			 * hardware currently using resource (hwmask),
+			 * or other software thread currently using
+			 * resource (swmask)
+			 */
+			ixgbe_release_swfw_sync_semaphore(hw);
+			msleep(5);
+		}
+	}
+
+	/*
+	 * If the resource is not released by the FW/HW the SW can assume that
+	 * the FW/HW malfunctions. In that case the SW should sets the
+	 * SW bit(s) of the requested resource(s) while ignoring the
+	 * corresponding FW/HW bits in the SW_FW_SYNC register.
+	 */
+	if (i >= timeout) {
+		swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+		if (swfw_sync & (fwmask | hwmask)) {
+			if (ixgbe_get_swfw_sync_semaphore(hw))
+				return IXGBE_ERR_SWFW_SYNC;
+
+			swfw_sync |= swmask;
+			IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+			ixgbe_release_swfw_sync_semaphore(hw);
+		}
+	}
+
+	msleep(5);
+	return 0;
+}
+
+/**
+ * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore throught the SW_FW_SYNC register
+ * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
+ **/
+static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
+{
+	u32 swfw_sync;
+	u32 swmask = mask;
+
+	ixgbe_get_swfw_sync_semaphore(hw);
+
+	swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+	swfw_sync &= ~swmask;
+	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+
+	ixgbe_release_swfw_sync_semaphore(hw);
+	msleep(5);
+}
+
+/**
+ * ixgbe_get_nvm_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Sets the hardware semaphores so SW/FW can gain control of shared resources
+ **/
+static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_EEPROM;
+	u32 timeout = 2000;
+	u32 i;
+	u32 swsm;
+
+	/* Get SMBI software semaphore between device drivers first */
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+		if (!(swsm & IXGBE_SWSM_SMBI)) {
+			status = 0;
+			break;
+		}
+		udelay(50);
+	}
+
+	/* Now get the semaphore between SW/FW through the REGSMP bit */
+	if (status) {
+		for (i = 0; i < timeout; i++) {
+			swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+			if (!(swsm & IXGBE_SWFW_REGSMP))
+				break;
+
+			udelay(50);
+		}
+	} else {
+		hw_dbg(hw, "Software semaphore SMBI between device drivers "
+		           "not granted.\n");
+	}
+
+	return status;
+}
+
+/**
+ * ixgbe_release_nvm_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * This function clears hardware semaphore bits.
+ **/
+static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+	 u32 swsm;
+
+	/* Release both semaphores by writing 0 to the bits REGSMP and SMBI */
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+	swsm &= ~IXGBE_SWSM_SMBI;
+	IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+	swsm &= ~IXGBE_SWFW_REGSMP;
+	IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm);
+
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+static struct ixgbe_mac_operations mac_ops_X540 = {
+	.init_hw                = &ixgbe_init_hw_generic,
+	.reset_hw               = &ixgbe_reset_hw_X540,
+	.start_hw               = &ixgbe_start_hw_generic,
+	.clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
+	.get_media_type         = &ixgbe_get_media_type_X540,
+	.get_supported_physical_layer =
+                                  &ixgbe_get_supported_physical_layer_X540,
+	.enable_rx_dma          = &ixgbe_enable_rx_dma_generic,
+	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
+	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
+	.get_device_caps        = NULL,
+	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_generic,
+	.stop_adapter           = &ixgbe_stop_adapter_generic,
+	.get_bus_info           = &ixgbe_get_bus_info_generic,
+	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
+	.read_analog_reg8       = NULL,
+	.write_analog_reg8      = NULL,
+	.setup_link             = &ixgbe_setup_mac_link_X540,
+	.check_link             = &ixgbe_check_mac_link_generic,
+	.get_link_capabilities  = &ixgbe_get_copper_link_capabilities_generic,
+	.led_on                 = &ixgbe_led_on_generic,
+	.led_off                = &ixgbe_led_off_generic,
+	.blink_led_start        = &ixgbe_blink_led_start_generic,
+	.blink_led_stop         = &ixgbe_blink_led_stop_generic,
+	.set_rar                = &ixgbe_set_rar_generic,
+	.clear_rar              = &ixgbe_clear_rar_generic,
+	.set_vmdq               = &ixgbe_set_vmdq_generic,
+	.clear_vmdq             = &ixgbe_clear_vmdq_generic,
+	.init_rx_addrs          = &ixgbe_init_rx_addrs_generic,
+	.update_uc_addr_list    = &ixgbe_update_uc_addr_list_generic,
+	.update_mc_addr_list    = &ixgbe_update_mc_addr_list_generic,
+	.enable_mc              = &ixgbe_enable_mc_generic,
+	.disable_mc             = &ixgbe_disable_mc_generic,
+	.clear_vfta             = &ixgbe_clear_vfta_generic,
+	.set_vfta               = &ixgbe_set_vfta_generic,
+	.fc_enable              = &ixgbe_fc_enable_generic,
+	.init_uta_tables        = &ixgbe_init_uta_tables_generic,
+	.setup_sfp              = NULL,
+	.set_mac_anti_spoofing  = &ixgbe_set_mac_anti_spoofing,
+	.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
+	.init_params            = &ixgbe_init_eeprom_params_X540,
+	.read                   = &ixgbe_read_eerd_X540,
+	.write                  = &ixgbe_write_eewr_X540,
+	.calc_checksum		= &ixgbe_calc_eeprom_checksum_X540,
+	.validate_checksum      = &ixgbe_validate_eeprom_checksum_generic,
+	.update_checksum        = &ixgbe_update_eeprom_checksum_X540,
+};
+
+static struct ixgbe_phy_operations phy_ops_X540 = {
+	.identify               = &ixgbe_identify_phy_generic,
+	.identify_sfp           = &ixgbe_identify_sfp_module_generic,
+	.init			= NULL,
+	.reset                  = &ixgbe_reset_phy_generic,
+	.read_reg               = &ixgbe_read_phy_reg_generic,
+	.write_reg              = &ixgbe_write_phy_reg_generic,
+	.setup_link             = &ixgbe_setup_phy_link_generic,
+	.setup_link_speed       = &ixgbe_setup_phy_link_speed_generic,
+	.read_i2c_byte          = &ixgbe_read_i2c_byte_generic,
+	.write_i2c_byte         = &ixgbe_write_i2c_byte_generic,
+	.read_i2c_eeprom        = &ixgbe_read_i2c_eeprom_generic,
+	.write_i2c_eeprom       = &ixgbe_write_i2c_eeprom_generic,
+	.check_overtemp         = &ixgbe_tn_check_overtemp,
+};
+
+struct ixgbe_info ixgbe_X540_info = {
+	.mac                    = ixgbe_mac_X540,
+	.get_invariants         = &ixgbe_get_invariants_X540,
+	.mac_ops                = &mac_ops_X540,
+	.eeprom_ops             = &eeprom_ops_X540,
+	.phy_ops                = &phy_ops_X540,
+	.mbx_ops                = &mbx_ops_generic,
+};
diff --git a/drivers/net/ixgbevf/Makefile b/drivers/net/ixgbevf/Makefile
index dd4e0d27e8c..1f35d229e71 100644
--- a/drivers/net/ixgbevf/Makefile
+++ b/drivers/net/ixgbevf/Makefile
@@ -1,7 +1,7 @@
 ################################################################################
 #
 # Intel 82599 Virtual Function driver
-# Copyright(c) 1999 - 2009 Intel Corporation.
+# Copyright(c) 1999 - 2010 Intel Corporation.
 #
 # This program is free software; you can redistribute it and/or modify it
 # under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbevf/defines.h b/drivers/net/ixgbevf/defines.h
index ca2c81f49a0..de643eb2ada 100644
--- a/drivers/net/ixgbevf/defines.h
+++ b/drivers/net/ixgbevf/defines.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -30,6 +30,7 @@
 
 /* Device IDs */
 #define IXGBE_DEV_ID_82599_VF           0x10ED
+#define IXGBE_DEV_ID_X540_VF            0x1515
 
 #define IXGBE_VF_IRQ_CLEAR_MASK         7
 #define IXGBE_VF_MAX_TX_QUEUES          1
diff --git a/drivers/net/ixgbevf/ethtool.c b/drivers/net/ixgbevf/ethtool.c
index 4cc817acfb6..fa29b3c8c46 100644
--- a/drivers/net/ixgbevf/ethtool.c
+++ b/drivers/net/ixgbevf/ethtool.c
@@ -544,7 +544,7 @@ struct ixgbevf_reg_test {
 #define TABLE64_TEST_HI	6
 
 /* default VF register test */
-static struct ixgbevf_reg_test reg_test_vf[] = {
+static const struct ixgbevf_reg_test reg_test_vf[] = {
 	{ IXGBE_VFRDBAL(0), 2, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
 	{ IXGBE_VFRDBAH(0), 2, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
 	{ IXGBE_VFRDLEN(0), 2, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
@@ -557,19 +557,23 @@ static struct ixgbevf_reg_test reg_test_vf[] = {
 	{ 0, 0, 0, 0 }
 };
 
+static const u32 register_test_patterns[] = {
+	0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
+};
+
 #define REG_PATTERN_TEST(R, M, W)                                             \
 {                                                                             \
 	u32 pat, val, before;                                                 \
-	const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
-	for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {                       \
+	for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) {      \
 		before = readl(adapter->hw.hw_addr + R);                      \
-		writel((_test[pat] & W), (adapter->hw.hw_addr + R));          \
+		writel((register_test_patterns[pat] & W),                     \
+		       (adapter->hw.hw_addr + R));                            \
 		val = readl(adapter->hw.hw_addr + R);                         \
-		if (val != (_test[pat] & W & M)) {                            \
+		if (val != (register_test_patterns[pat] & W & M)) {           \
 			hw_dbg(&adapter->hw,                                  \
 			"pattern test reg %04X failed: got "                  \
 			"0x%08X expected 0x%08X\n",                           \
-			R, val, (_test[pat] & W & M));                        \
+			R, val, (register_test_patterns[pat] & W & M));       \
 			*data = R;                                            \
 			writel(before, adapter->hw.hw_addr + R);              \
 			return 1;                                             \
@@ -596,7 +600,7 @@ static struct ixgbevf_reg_test reg_test_vf[] = {
 
 static int ixgbevf_reg_test(struct ixgbevf_adapter *adapter, u64 *data)
 {
-	struct ixgbevf_reg_test *test;
+	const struct ixgbevf_reg_test *test;
 	u32 i;
 
 	test = reg_test_vf;
diff --git a/drivers/net/ixgbevf/ixgbevf.h b/drivers/net/ixgbevf/ixgbevf.h
index da4033c6efa..a63efcb2cf1 100644
--- a/drivers/net/ixgbevf/ixgbevf.h
+++ b/drivers/net/ixgbevf/ixgbevf.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -275,9 +275,11 @@ enum ixbgevf_state_t {
 
 enum ixgbevf_boards {
 	board_82599_vf,
+	board_X540_vf,
 };
 
-extern struct ixgbevf_info ixgbevf_vf_info;
+extern struct ixgbevf_info ixgbevf_82599_vf_info;
+extern struct ixgbevf_info ixgbevf_X540_vf_info;
 extern struct ixgbe_mac_operations ixgbevf_mbx_ops;
 
 /* needed by ethtool.c */
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index dc03c965238..464e6c9d3fc 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -51,12 +51,14 @@ char ixgbevf_driver_name[] = "ixgbevf";
 static const char ixgbevf_driver_string[] =
 	"Intel(R) 82599 Virtual Function";
 
-#define DRV_VERSION "1.0.0-k0"
+#define DRV_VERSION "1.0.19-k0"
 const char ixgbevf_driver_version[] = DRV_VERSION;
-static char ixgbevf_copyright[] = "Copyright (c) 2009 Intel Corporation.";
+static char ixgbevf_copyright[] =
+	"Copyright (c) 2009 - 2010 Intel Corporation.";
 
 static const struct ixgbevf_info *ixgbevf_info_tbl[] = {
-	[board_82599_vf] = &ixgbevf_vf_info,
+	[board_82599_vf] = &ixgbevf_82599_vf_info,
+	[board_X540_vf]  = &ixgbevf_X540_vf_info,
 };
 
 /* ixgbevf_pci_tbl - PCI Device ID Table
@@ -70,6 +72,8 @@ static const struct ixgbevf_info *ixgbevf_info_tbl[] = {
 static struct pci_device_id ixgbevf_pci_tbl[] = {
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF),
 	board_82599_vf},
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF),
+	board_X540_vf},
 
 	/* required last entry */
 	{0, }
@@ -2488,10 +2492,9 @@ int ixgbevf_setup_tx_resources(struct ixgbevf_adapter *adapter,
 	int size;
 
 	size = sizeof(struct ixgbevf_tx_buffer) * tx_ring->count;
-	tx_ring->tx_buffer_info = vmalloc(size);
+	tx_ring->tx_buffer_info = vzalloc(size);
 	if (!tx_ring->tx_buffer_info)
 		goto err;
-	memset(tx_ring->tx_buffer_info, 0, size);
 
 	/* round up to nearest 4K */
 	tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc);
@@ -2555,14 +2558,13 @@ int ixgbevf_setup_rx_resources(struct ixgbevf_adapter *adapter,
 	int size;
 
 	size = sizeof(struct ixgbevf_rx_buffer) * rx_ring->count;
-	rx_ring->rx_buffer_info = vmalloc(size);
+	rx_ring->rx_buffer_info = vzalloc(size);
 	if (!rx_ring->rx_buffer_info) {
 		hw_dbg(&adapter->hw,
 		       "Unable to vmalloc buffer memory for "
 		       "the receive descriptor ring\n");
 		goto alloc_failed;
 	}
-	memset(rx_ring->rx_buffer_info, 0, size);
 
 	/* Round up to nearest 4K */
 	rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc);
@@ -3424,10 +3426,6 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
 	if (hw->mac.ops.get_bus_info)
 		hw->mac.ops.get_bus_info(hw);
 
-
-	netif_carrier_off(netdev);
-	netif_tx_stop_all_queues(netdev);
-
 	strcpy(netdev->name, "eth%d");
 
 	err = register_netdev(netdev);
@@ -3436,6 +3434,8 @@ static int __devinit ixgbevf_probe(struct pci_dev *pdev,
 
 	adapter->netdev_registered = true;
 
+	netif_carrier_off(netdev);
+
 	ixgbevf_init_last_counter_stats(adapter);
 
 	/* print the MAC address */
@@ -3487,10 +3487,9 @@ static void __devexit ixgbevf_remove(struct pci_dev *pdev)
 
 	del_timer_sync(&adapter->watchdog_timer);
 
+	cancel_work_sync(&adapter->reset_task);
 	cancel_work_sync(&adapter->watchdog_task);
 
-	flush_scheduled_work();
-
 	if (adapter->netdev_registered) {
 		unregister_netdev(netdev);
 		adapter->netdev_registered = false;
diff --git a/drivers/net/ixgbevf/mbx.c b/drivers/net/ixgbevf/mbx.c
index 84ac486f4a6..7a883312577 100644
--- a/drivers/net/ixgbevf/mbx.c
+++ b/drivers/net/ixgbevf/mbx.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbevf/mbx.h b/drivers/net/ixgbevf/mbx.h
index 8c063bebee7..b2b5bf5daa3 100644
--- a/drivers/net/ixgbevf/mbx.h
+++ b/drivers/net/ixgbevf/mbx.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbevf/regs.h b/drivers/net/ixgbevf/regs.h
index 12f75960aec..fb80ca1bcc9 100644
--- a/drivers/net/ixgbevf/regs.h
+++ b/drivers/net/ixgbevf/regs.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
diff --git a/drivers/net/ixgbevf/vf.c b/drivers/net/ixgbevf/vf.c
index bfe42c1fcfa..eecd3bf6833 100644
--- a/drivers/net/ixgbevf/vf.c
+++ b/drivers/net/ixgbevf/vf.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -381,8 +381,12 @@ static struct ixgbe_mac_operations ixgbevf_mac_ops = {
 	.set_vfta            = ixgbevf_set_vfta_vf,
 };
 
-struct ixgbevf_info ixgbevf_vf_info = {
+struct ixgbevf_info ixgbevf_82599_vf_info = {
 	.mac = ixgbe_mac_82599_vf,
 	.mac_ops = &ixgbevf_mac_ops,
 };
 
+struct ixgbevf_info ixgbevf_X540_vf_info = {
+	.mac = ixgbe_mac_X540_vf,
+	.mac_ops = &ixgbevf_mac_ops,
+};
diff --git a/drivers/net/ixgbevf/vf.h b/drivers/net/ixgbevf/vf.h
index 61f9dc83142..23eb114c149 100644
--- a/drivers/net/ixgbevf/vf.h
+++ b/drivers/net/ixgbevf/vf.h
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel 82599 Virtual Function driver
-  Copyright(c) 1999 - 2009 Intel Corporation.
+  Copyright(c) 1999 - 2010 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -73,6 +73,7 @@ struct ixgbe_mac_operations {
 enum ixgbe_mac_type {
 	ixgbe_mac_unknown = 0,
 	ixgbe_mac_82599_vf,
+	ixgbe_mac_X540_vf,
 	ixgbe_num_macs
 };
 
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index c57d9a43cec..e97ebef3cf4 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -135,7 +135,7 @@ jme_reset_phy_processor(struct jme_adapter *jme)
 
 static void
 jme_setup_wakeup_frame(struct jme_adapter *jme,
-		u32 *mask, u32 crc, int fnr)
+		       const u32 *mask, u32 crc, int fnr)
 {
 	int i;
 
@@ -163,7 +163,7 @@ jme_setup_wakeup_frame(struct jme_adapter *jme,
 static inline void
 jme_reset_mac_processor(struct jme_adapter *jme)
 {
-	u32 mask[WAKEUP_FRAME_MASK_DWNR] = {0, 0, 0, 0};
+	static const u32 mask[WAKEUP_FRAME_MASK_DWNR] = {0, 0, 0, 0};
 	u32 crc = 0xCDCDCDCD;
 	u32 gpreg0;
 	int i;
@@ -2076,12 +2076,11 @@ jme_change_mtu(struct net_device *netdev, int new_mtu)
 	}
 
 	if (new_mtu > 1900) {
-		netdev->features &= ~(NETIF_F_HW_CSUM |
-				NETIF_F_TSO |
-				NETIF_F_TSO6);
+		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+				NETIF_F_TSO | NETIF_F_TSO6);
 	} else {
 		if (test_bit(JME_FLAG_TXCSUM, &jme->flags))
-			netdev->features |= NETIF_F_HW_CSUM;
+			netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 		if (test_bit(JME_FLAG_TSO, &jme->flags))
 			netdev->features |= NETIF_F_TSO | NETIF_F_TSO6;
 	}
@@ -2514,10 +2513,12 @@ jme_set_tx_csum(struct net_device *netdev, u32 on)
 	if (on) {
 		set_bit(JME_FLAG_TXCSUM, &jme->flags);
 		if (netdev->mtu <= 1900)
-			netdev->features |= NETIF_F_HW_CSUM;
+			netdev->features |=
+				NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	} else {
 		clear_bit(JME_FLAG_TXCSUM, &jme->flags);
-		netdev->features &= ~NETIF_F_HW_CSUM;
+		netdev->features &=
+				~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
 	}
 
 	return 0;
@@ -2797,7 +2798,8 @@ jme_init_one(struct pci_dev *pdev,
 	netdev->netdev_ops = &jme_netdev_ops;
 	netdev->ethtool_ops		= &jme_ethtool_ops;
 	netdev->watchdog_timeo		= TX_TIMEOUT;
-	netdev->features		=	NETIF_F_HW_CSUM |
+	netdev->features		=	NETIF_F_IP_CSUM |
+						NETIF_F_IPV6_CSUM |
 						NETIF_F_SG |
 						NETIF_F_TSO |
 						NETIF_F_TSO6 |
diff --git a/drivers/net/ksz884x.c b/drivers/net/ksz884x.c
index 37504a39890..540a8dcbcc4 100644
--- a/drivers/net/ksz884x.c
+++ b/drivers/net/ksz884x.c
@@ -3570,7 +3570,7 @@ static void hw_cfg_wol(struct ksz_hw *hw, u16 frame, int set)
  * This routine is used to program Wake-on-LAN pattern.
  */
 static void hw_set_wol_frame(struct ksz_hw *hw, int i, uint mask_size,
-	u8 *mask, uint frame_size, u8 *pattern)
+	const u8 *mask, uint frame_size, const u8 *pattern)
 {
 	int bits;
 	int from;
@@ -3626,9 +3626,9 @@ static void hw_set_wol_frame(struct ksz_hw *hw, int i, uint mask_size,
  *
  * This routine is used to add ARP pattern for waking up the host.
  */
-static void hw_add_wol_arp(struct ksz_hw *hw, u8 *ip_addr)
+static void hw_add_wol_arp(struct ksz_hw *hw, const u8 *ip_addr)
 {
-	u8 mask[6] = { 0x3F, 0xF0, 0x3F, 0x00, 0xC0, 0x03 };
+	static const u8 mask[6] = { 0x3F, 0xF0, 0x3F, 0x00, 0xC0, 0x03 };
 	u8 pattern[42] = {
 		0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
 		0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
@@ -3651,8 +3651,8 @@ static void hw_add_wol_arp(struct ksz_hw *hw, u8 *ip_addr)
  */
 static void hw_add_wol_bcast(struct ksz_hw *hw)
 {
-	u8 mask[] = { 0x3F };
-	u8 pattern[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
+	static const u8 mask[] = { 0x3F };
+	static const u8 pattern[] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
 
 	hw_set_wol_frame(hw, 2, 1, mask, MAC_ADDR_LEN, pattern);
 }
@@ -3669,7 +3669,7 @@ static void hw_add_wol_bcast(struct ksz_hw *hw)
  */
 static void hw_add_wol_mcast(struct ksz_hw *hw)
 {
-	u8 mask[] = { 0x3F };
+	static const u8 mask[] = { 0x3F };
 	u8 pattern[] = { 0x33, 0x33, 0xFF, 0x00, 0x00, 0x00 };
 
 	memcpy(&pattern[3], &hw->override_addr[3], 3);
@@ -3687,7 +3687,7 @@ static void hw_add_wol_mcast(struct ksz_hw *hw)
  */
 static void hw_add_wol_ucast(struct ksz_hw *hw)
 {
-	u8 mask[] = { 0x3F };
+	static const u8 mask[] = { 0x3F };
 
 	hw_set_wol_frame(hw, 0, 1, mask, MAC_ADDR_LEN, hw->override_addr);
 }
@@ -3700,7 +3700,7 @@ static void hw_add_wol_ucast(struct ksz_hw *hw)
  *
  * This routine is used to enable Wake-on-LAN depending on driver settings.
  */
-static void hw_enable_wol(struct ksz_hw *hw, u32 wol_enable, u8 *net_addr)
+static void hw_enable_wol(struct ksz_hw *hw, u32 wol_enable, const u8 *net_addr)
 {
 	hw_cfg_wol(hw, KS8841_WOL_MAGIC_ENABLE, (wol_enable & WAKE_MAGIC));
 	hw_cfg_wol(hw, KS8841_WOL_FRAME0_ENABLE, (wol_enable & WAKE_UCAST));
@@ -6208,7 +6208,7 @@ static int netdev_set_wol(struct net_device *dev,
 	struct dev_info *hw_priv = priv->adapter;
 
 	/* Need to find a way to retrieve the device IP address. */
-	u8 net_addr[] = { 192, 168, 1, 1 };
+	static const u8 net_addr[] = { 192, 168, 1, 1 };
 
 	if (wol->wolopts & ~hw_priv->wol_support)
 		return -EINVAL;
@@ -6953,7 +6953,7 @@ static void read_other_addr(struct ksz_hw *hw)
 #define PCI_VENDOR_ID_MICREL_KS		0x16c6
 #endif
 
-static int __init pcidev_init(struct pci_dev *pdev,
+static int __devinit pcidev_init(struct pci_dev *pdev,
 	const struct pci_device_id *id)
 {
 	struct net_device *dev;
@@ -7241,7 +7241,7 @@ static int pcidev_suspend(struct pci_dev *pdev, pm_message_t state)
 	struct ksz_hw *hw = &hw_priv->hw;
 
 	/* Need to find a way to retrieve the device IP address. */
-	u8 net_addr[] = { 192, 168, 1, 1 };
+	static const u8 net_addr[] = { 192, 168, 1, 1 };
 
 	for (i = 0; i < hw->dev_count; i++) {
 		if (info->netdev[i]) {
diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index e7030ceb178..da74db4a03d 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c
@@ -203,7 +203,7 @@ static void __NS8390_init(struct net_device *dev, int startp);
 static int __ei_open(struct net_device *dev)
 {
 	unsigned long flags;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 
 	if (dev->watchdog_timeo <= 0)
 		 dev->watchdog_timeo = TX_TIMEOUT;
@@ -231,7 +231,7 @@ static int __ei_open(struct net_device *dev)
  */
 static int __ei_close(struct net_device *dev)
 {
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	unsigned long flags;
 
 	/*
@@ -256,7 +256,7 @@ static int __ei_close(struct net_device *dev)
 static void __ei_tx_timeout(struct net_device *dev)
 {
 	unsigned long e8390_base = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	int txsr, isr, tickssofar = jiffies - dev_trans_start(dev);
 	unsigned long flags;
 
@@ -303,7 +303,7 @@ static netdev_tx_t __ei_start_xmit(struct sk_buff *skb,
 				   struct net_device *dev)
 {
 	unsigned long e8390_base = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	int send_length = skb->len, output_page;
 	unsigned long flags;
 	char buf[ETH_ZLEN];
@@ -592,7 +592,7 @@ static void ei_tx_err(struct net_device *dev)
 static void ei_tx_intr(struct net_device *dev)
 {
 	unsigned long e8390_base = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	int status = ei_inb(e8390_base + EN0_TSR);
 
 	ei_outb_p(ENISR_TX, e8390_base + EN0_ISR); /* Ack intr. */
@@ -675,7 +675,7 @@ static void ei_tx_intr(struct net_device *dev)
 static void ei_receive(struct net_device *dev)
 {
 	unsigned long e8390_base = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	unsigned char rxing_page, this_frame, next_frame;
 	unsigned short current_offset;
 	int rx_pkt_count = 0;
@@ -879,7 +879,7 @@ static void ei_rx_overrun(struct net_device *dev)
 static struct net_device_stats *__ei_get_stats(struct net_device *dev)
 {
 	unsigned long ioaddr = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	unsigned long flags;
 
 	/* If the card is stopped, just return the present stats. */
@@ -927,7 +927,7 @@ static void do_set_multicast_list(struct net_device *dev)
 {
 	unsigned long e8390_base = dev->base_addr;
 	int i;
-	struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 
 	if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI)))
 	{
@@ -981,7 +981,7 @@ static void do_set_multicast_list(struct net_device *dev)
 static void __ei_set_multicast_list(struct net_device *dev)
 {
 	unsigned long flags;
-	struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 
 	spin_lock_irqsave(&ei_local->page_lock, flags);
 	do_set_multicast_list(dev);
@@ -998,7 +998,7 @@ static void __ei_set_multicast_list(struct net_device *dev)
 
 static void ethdev_setup(struct net_device *dev)
 {
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	if (ei_debug > 1)
 		printk(version);
 
@@ -1036,7 +1036,7 @@ static struct net_device *____alloc_ei_netdev(int size)
 static void __NS8390_init(struct net_device *dev, int startp)
 {
 	unsigned long e8390_base = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	int i;
 	int endcfg = ei_local->word16
 	    ? (0x48 | ENDCFG_WTS | (ei_local->bigendian ? ENDCFG_BOS : 0))
@@ -1099,7 +1099,7 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
 								int start_page)
 {
 	unsigned long e8390_base = dev->base_addr;
- 	struct ei_device *ei_local __attribute((unused)) = (struct ei_device *) netdev_priv(dev);
+ 	struct ei_device *ei_local __attribute((unused)) = netdev_priv(dev);
 
 	ei_outb_p(E8390_NODMA+E8390_PAGE0, e8390_base+E8390_CMD);
 
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ll_temac_main.c
index 9f8e7027b0b..183765cb7f2 100644
--- a/drivers/net/ll_temac_main.c
+++ b/drivers/net/ll_temac_main.c
@@ -692,7 +692,7 @@ static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	cur_p->app0 = 0;
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		unsigned int csum_start_off = skb_transport_offset(skb);
+		unsigned int csum_start_off = skb_checksum_start_offset(skb);
 		unsigned int csum_index_off = csum_start_off + skb->csum_offset;
 
 		cur_p->app0 |= 1; /* TX Checksum Enabled */
@@ -952,7 +952,7 @@ static const struct attribute_group temac_attr_group = {
 	.attrs = temac_device_attrs,
 };
 
-static int __init
+static int __devinit
 temac_of_probe(struct platform_device *op, const struct of_device_id *match)
 {
 	struct device_node *np;
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 0fc9dc7f20d..6ed577b065d 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -38,6 +38,7 @@ struct macvlan_port {
 	struct hlist_head	vlan_hash[MACVLAN_HASH_SIZE];
 	struct list_head	vlans;
 	struct rcu_head		rcu;
+	bool 			passthru;
 };
 
 #define macvlan_port_get_rcu(dev) \
@@ -169,6 +170,7 @@ static struct sk_buff *macvlan_handle_frame(struct sk_buff *skb)
 			macvlan_broadcast(skb, port, NULL,
 					  MACVLAN_MODE_PRIVATE |
 					  MACVLAN_MODE_VEPA    |
+					  MACVLAN_MODE_PASSTHRU|
 					  MACVLAN_MODE_BRIDGE);
 		else if (src->mode == MACVLAN_MODE_VEPA)
 			/* flood to everyone except source */
@@ -185,7 +187,10 @@ static struct sk_buff *macvlan_handle_frame(struct sk_buff *skb)
 		return skb;
 	}
 
-	vlan = macvlan_hash_lookup(port, eth->h_dest);
+	if (port->passthru)
+		vlan = list_first_entry(&port->vlans, struct macvlan_dev, list);
+	else
+		vlan = macvlan_hash_lookup(port, eth->h_dest);
 	if (vlan == NULL)
 		return skb;
 
@@ -243,18 +248,22 @@ xmit_world:
 netdev_tx_t macvlan_start_xmit(struct sk_buff *skb,
 			       struct net_device *dev)
 {
-	int i = skb_get_queue_mapping(skb);
-	struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
 	unsigned int len = skb->len;
 	int ret;
+	const struct macvlan_dev *vlan = netdev_priv(dev);
 
 	ret = macvlan_queue_xmit(skb, dev);
 	if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) {
-		txq->tx_packets++;
-		txq->tx_bytes += len;
-	} else
-		txq->tx_dropped++;
+		struct macvlan_pcpu_stats *pcpu_stats;
 
+		pcpu_stats = this_cpu_ptr(vlan->pcpu_stats);
+		u64_stats_update_begin(&pcpu_stats->syncp);
+		pcpu_stats->tx_packets++;
+		pcpu_stats->tx_bytes += len;
+		u64_stats_update_end(&pcpu_stats->syncp);
+	} else {
+		this_cpu_inc(vlan->pcpu_stats->tx_dropped);
+	}
 	return ret;
 }
 EXPORT_SYMBOL_GPL(macvlan_start_xmit);
@@ -284,6 +293,11 @@ static int macvlan_open(struct net_device *dev)
 	struct net_device *lowerdev = vlan->lowerdev;
 	int err;
 
+	if (vlan->port->passthru) {
+		dev_set_promiscuity(lowerdev, 1);
+		goto hash_add;
+	}
+
 	err = -EBUSY;
 	if (macvlan_addr_busy(vlan->port, dev->dev_addr))
 		goto out;
@@ -296,6 +310,8 @@ static int macvlan_open(struct net_device *dev)
 		if (err < 0)
 			goto del_unicast;
 	}
+
+hash_add:
 	macvlan_hash_add(vlan);
 	return 0;
 
@@ -310,12 +326,18 @@ static int macvlan_stop(struct net_device *dev)
 	struct macvlan_dev *vlan = netdev_priv(dev);
 	struct net_device *lowerdev = vlan->lowerdev;
 
+	if (vlan->port->passthru) {
+		dev_set_promiscuity(lowerdev, -1);
+		goto hash_del;
+	}
+
 	dev_mc_unsync(lowerdev, dev);
 	if (dev->flags & IFF_ALLMULTI)
 		dev_set_allmulti(lowerdev, -1);
 
 	dev_uc_del(lowerdev, dev->dev_addr);
 
+hash_del:
 	macvlan_hash_del(vlan);
 	return 0;
 }
@@ -414,14 +436,15 @@ static int macvlan_init(struct net_device *dev)
 	dev->state		= (dev->state & ~MACVLAN_STATE_MASK) |
 				  (lowerdev->state & MACVLAN_STATE_MASK);
 	dev->features 		= lowerdev->features & MACVLAN_FEATURES;
+	dev->features		|= NETIF_F_LLTX;
 	dev->gso_max_size	= lowerdev->gso_max_size;
 	dev->iflink		= lowerdev->ifindex;
 	dev->hard_header_len	= lowerdev->hard_header_len;
 
 	macvlan_set_lockdep_class(dev);
 
-	vlan->rx_stats = alloc_percpu(struct macvlan_rx_stats);
-	if (!vlan->rx_stats)
+	vlan->pcpu_stats = alloc_percpu(struct macvlan_pcpu_stats);
+	if (!vlan->pcpu_stats)
 		return -ENOMEM;
 
 	return 0;
@@ -431,7 +454,7 @@ static void macvlan_uninit(struct net_device *dev)
 {
 	struct macvlan_dev *vlan = netdev_priv(dev);
 
-	free_percpu(vlan->rx_stats);
+	free_percpu(vlan->pcpu_stats);
 }
 
 static struct rtnl_link_stats64 *macvlan_dev_get_stats64(struct net_device *dev,
@@ -439,33 +462,38 @@ static struct rtnl_link_stats64 *macvlan_dev_get_stats64(struct net_device *dev,
 {
 	struct macvlan_dev *vlan = netdev_priv(dev);
 
-	dev_txq_stats_fold(dev, stats);
-
-	if (vlan->rx_stats) {
-		struct macvlan_rx_stats *p, accum = {0};
-		u64 rx_packets, rx_bytes, rx_multicast;
+	if (vlan->pcpu_stats) {
+		struct macvlan_pcpu_stats *p;
+		u64 rx_packets, rx_bytes, rx_multicast, tx_packets, tx_bytes;
+		u32 rx_errors = 0, tx_dropped = 0;
 		unsigned int start;
 		int i;
 
 		for_each_possible_cpu(i) {
-			p = per_cpu_ptr(vlan->rx_stats, i);
+			p = per_cpu_ptr(vlan->pcpu_stats, i);
 			do {
 				start = u64_stats_fetch_begin_bh(&p->syncp);
 				rx_packets	= p->rx_packets;
 				rx_bytes	= p->rx_bytes;
 				rx_multicast	= p->rx_multicast;
+				tx_packets	= p->tx_packets;
+				tx_bytes	= p->tx_bytes;
 			} while (u64_stats_fetch_retry_bh(&p->syncp, start));
-			accum.rx_packets	+= rx_packets;
-			accum.rx_bytes		+= rx_bytes;
-			accum.rx_multicast	+= rx_multicast;
-			/* rx_errors is an ulong, updated without syncp protection */
-			accum.rx_errors		+= p->rx_errors;
+
+			stats->rx_packets	+= rx_packets;
+			stats->rx_bytes		+= rx_bytes;
+			stats->multicast	+= rx_multicast;
+			stats->tx_packets	+= tx_packets;
+			stats->tx_bytes		+= tx_bytes;
+			/* rx_errors & tx_dropped are u32, updated
+			 * without syncp protection.
+			 */
+			rx_errors	+= p->rx_errors;
+			tx_dropped	+= p->tx_dropped;
 		}
-		stats->rx_packets = accum.rx_packets;
-		stats->rx_bytes   = accum.rx_bytes;
-		stats->rx_errors  = accum.rx_errors;
-		stats->rx_dropped = accum.rx_errors;
-		stats->multicast  = accum.rx_multicast;
+		stats->rx_errors	= rx_errors;
+		stats->rx_dropped	= rx_errors;
+		stats->tx_dropped	= tx_dropped;
 	}
 	return stats;
 }
@@ -549,6 +577,7 @@ static int macvlan_port_create(struct net_device *dev)
 	if (port == NULL)
 		return -ENOMEM;
 
+	port->passthru = false;
 	port->dev = dev;
 	INIT_LIST_HEAD(&port->vlans);
 	for (i = 0; i < MACVLAN_HASH_SIZE; i++)
@@ -593,6 +622,7 @@ static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[])
 		case MACVLAN_MODE_PRIVATE:
 		case MACVLAN_MODE_VEPA:
 		case MACVLAN_MODE_BRIDGE:
+		case MACVLAN_MODE_PASSTHRU:
 			break;
 		default:
 			return -EINVAL;
@@ -601,25 +631,6 @@ static int macvlan_validate(struct nlattr *tb[], struct nlattr *data[])
 	return 0;
 }
 
-static int macvlan_get_tx_queues(struct net *net,
-				 struct nlattr *tb[],
-				 unsigned int *num_tx_queues,
-				 unsigned int *real_num_tx_queues)
-{
-	struct net_device *real_dev;
-
-	if (!tb[IFLA_LINK])
-		return -EINVAL;
-
-	real_dev = __dev_get_by_index(net, nla_get_u32(tb[IFLA_LINK]));
-	if (!real_dev)
-		return -ENODEV;
-
-	*num_tx_queues      = real_dev->num_tx_queues;
-	*real_num_tx_queues = real_dev->real_num_tx_queues;
-	return 0;
-}
-
 int macvlan_common_newlink(struct net *src_net, struct net_device *dev,
 			   struct nlattr *tb[], struct nlattr *data[],
 			   int (*receive)(struct sk_buff *skb),
@@ -661,6 +672,10 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev,
 	}
 	port = macvlan_port_get(lowerdev);
 
+	/* Only 1 macvlan device can be created in passthru mode */
+	if (port->passthru)
+		return -EINVAL;
+
 	vlan->lowerdev = lowerdev;
 	vlan->dev      = dev;
 	vlan->port     = port;
@@ -671,6 +686,13 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev,
 	if (data && data[IFLA_MACVLAN_MODE])
 		vlan->mode = nla_get_u32(data[IFLA_MACVLAN_MODE]);
 
+	if (vlan->mode == MACVLAN_MODE_PASSTHRU) {
+		if (!list_empty(&port->vlans))
+			return -EINVAL;
+		port->passthru = true;
+		memcpy(dev->dev_addr, lowerdev->dev_addr, ETH_ALEN);
+	}
+
 	err = register_netdevice(dev);
 	if (err < 0)
 		goto destroy_port;
@@ -743,7 +765,6 @@ int macvlan_link_register(struct rtnl_link_ops *ops)
 {
 	/* common fields */
 	ops->priv_size		= sizeof(struct macvlan_dev);
-	ops->get_tx_queues	= macvlan_get_tx_queues;
 	ops->validate		= macvlan_validate;
 	ops->maxtype		= IFLA_MACVLAN_MAX;
 	ops->policy		= macvlan_policy;
diff --git a/drivers/net/macvtap.c b/drivers/net/macvtap.c
index 42567279843..21845affea1 100644
--- a/drivers/net/macvtap.c
+++ b/drivers/net/macvtap.c
@@ -504,8 +504,7 @@ static int macvtap_skb_to_vnet_hdr(const struct sk_buff *skb,
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		vnet_hdr->flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
-		vnet_hdr->csum_start = skb->csum_start -
-					skb_headroom(skb);
+		vnet_hdr->csum_start = skb_checksum_start_offset(skb);
 		vnet_hdr->csum_offset = skb->csum_offset;
 	} /* else everything is zero */
 
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index b68eee2414c..7a7e18ba278 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -289,6 +289,10 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
 		MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_BF_REG_SZ_OFFSET);
 		dev_cap->bf_reg_size = 1 << (field & 0x1f);
 		MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_MAX_BF_REGS_PER_PAGE_OFFSET);
+		if ((1 << (field & 0x3f)) > (PAGE_SIZE / dev_cap->bf_reg_size)) {
+			mlx4_warn(dev, "firmware bug: log2 # of blue flame regs is invalid (%d), forcing 3\n", field & 0x1f);
+			field = 3;
+		}
 		dev_cap->bf_regs_per_page = 1 << (field & 0x3f);
 		mlx4_dbg(dev, "BlueFlame available (reg size %d, regs/page %d)\n",
 			 dev_cap->bf_reg_size, dev_cap->bf_regs_per_page);
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index dd2b6a71c6d..02076e16542 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1514,11 +1514,6 @@ static int mv643xx_eth_nway_reset(struct net_device *dev)
 	return genphy_restart_aneg(mp->phy);
 }
 
-static u32 mv643xx_eth_get_link(struct net_device *dev)
-{
-	return !!netif_carrier_ok(dev);
-}
-
 static int
 mv643xx_eth_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec)
 {
@@ -1658,7 +1653,7 @@ static const struct ethtool_ops mv643xx_eth_ethtool_ops = {
 	.set_settings		= mv643xx_eth_set_settings,
 	.get_drvinfo		= mv643xx_eth_get_drvinfo,
 	.nway_reset		= mv643xx_eth_nway_reset,
-	.get_link		= mv643xx_eth_get_link,
+	.get_link		= ethtool_op_get_link,
 	.get_coalesce		= mv643xx_eth_get_coalesce,
 	.set_coalesce		= mv643xx_eth_set_coalesce,
 	.get_ringparam		= mv643xx_eth_get_ringparam,
@@ -2983,7 +2978,7 @@ static int mv643xx_eth_remove(struct platform_device *pdev)
 	unregister_netdev(mp->dev);
 	if (mp->phy != NULL)
 		phy_detach(mp->phy);
-	flush_scheduled_work();
+	cancel_work_sync(&mp->tx_timeout_task);
 	free_netdev(mp->dev);
 
 	platform_set_drvdata(pdev, NULL);
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 8524cc40ec5..a37fcf11ab3 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -2736,7 +2736,7 @@ again:
 	odd_flag = 0;
 	flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
 	if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
-		cksum_offset = skb_transport_offset(skb);
+		cksum_offset = skb_checksum_start_offset(skb);
 		pseudo_hdr_offset = cksum_offset + skb->csum_offset;
 		/* If the headers are excessively large, then we must
 		 * fall back to a software checksum */
@@ -4067,7 +4067,7 @@ static void myri10ge_remove(struct pci_dev *pdev)
 	if (mgp == NULL)
 		return;
 
-	flush_scheduled_work();
+	cancel_work_sync(&mgp->watchdog_work);
 	netdev = mgp->dev;
 	unregister_netdev(netdev);
 
diff --git a/drivers/net/ne-h8300.c b/drivers/net/ne-h8300.c
index e0b0ef11f11..30be8c634eb 100644
--- a/drivers/net/ne-h8300.c
+++ b/drivers/net/ne-h8300.c
@@ -86,7 +86,7 @@ static u32 reg_offset[16];
 
 static int __init init_reg_offset(struct net_device *dev,unsigned long base_addr)
 {
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	int i;
 	unsigned char bus_width;
 
@@ -218,7 +218,7 @@ static int __init ne_probe1(struct net_device *dev, int ioaddr)
 	int start_page, stop_page;
 	int reg0, ret;
 	static unsigned version_printed;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	unsigned char bus_width;
 
 	if (!request_region(ioaddr, NE_IO_EXTENT, DRV_NAME))
@@ -371,7 +371,7 @@ static int ne_close(struct net_device *dev)
 static void ne_reset_8390(struct net_device *dev)
 {
 	unsigned long reset_start_time = jiffies;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 
 	if (ei_debug > 1)
 		printk(KERN_DEBUG "resetting the 8390 t=%ld...", jiffies);
@@ -397,7 +397,7 @@ static void ne_reset_8390(struct net_device *dev)
 
 static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
 {
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	/* This *shouldn't* happen. If it does, it's the last thing you'll see */
 
 	if (ei_status.dmaing)
@@ -437,7 +437,7 @@ static void ne_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, i
 
 static void ne_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
 {
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 #ifdef NE_SANITY_CHECK
 	int xfer_count = count;
 #endif
@@ -507,7 +507,7 @@ static void ne_block_input(struct net_device *dev, int count, struct sk_buff *sk
 static void ne_block_output(struct net_device *dev, int count,
 		const unsigned char *buf, const int start_page)
 {
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	unsigned long dma_start;
 #ifdef NE_SANITY_CHECK
 	int retries = 0;
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index 94255f09093..dfb67eb2a94 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -664,6 +664,7 @@ static int netconsole_netdev_event(struct notifier_block *this,
 	unsigned long flags;
 	struct netconsole_target *nt;
 	struct net_device *dev = ptr;
+	bool stopped = false;
 
 	if (!(event == NETDEV_CHANGENAME || event == NETDEV_UNREGISTER ||
 	      event == NETDEV_BONDING_DESLAVE || event == NETDEV_GOING_DOWN))
@@ -690,15 +691,16 @@ static int netconsole_netdev_event(struct notifier_block *this,
 			case NETDEV_GOING_DOWN:
 			case NETDEV_BONDING_DESLAVE:
 				nt->enabled = 0;
+				stopped = true;
 				break;
 			}
 		}
 		netconsole_target_put(nt);
 	}
 	spin_unlock_irqrestore(&target_list_lock, flags);
-	if (event == NETDEV_UNREGISTER || event == NETDEV_BONDING_DESLAVE)
-		printk(KERN_INFO "netconsole: network logging stopped, "
-			"interface %s %s\n",  dev->name,
+	if (stopped && (event == NETDEV_UNREGISTER || event == NETDEV_BONDING_DESLAVE))
+		printk(KERN_INFO "netconsole: network logging stopped on "
+			"interface %s as it %s\n",  dev->name,
 			event == NETDEV_UNREGISTER ? "unregistered" : "released slaves");
 
 done:
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 8e8a97839cb..a11380544e6 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -53,8 +53,8 @@
 
 #define _NETXEN_NIC_LINUX_MAJOR 4
 #define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 74
-#define NETXEN_NIC_LINUX_VERSIONID  "4.0.74"
+#define _NETXEN_NIC_LINUX_SUBVERSION 75
+#define NETXEN_NIC_LINUX_VERSIONID  "4.0.75"
 
 #define NETXEN_VERSION_CODE(a, b, c)	(((a) << 24) + ((b) << 16) + (c))
 #define _major(v)	(((v) >> 24) & 0xff)
@@ -1132,6 +1132,7 @@ typedef struct {
 #define NETXEN_NIC_MSI_ENABLED		0x02
 #define NETXEN_NIC_MSIX_ENABLED		0x04
 #define NETXEN_NIC_LRO_ENABLED		0x08
+#define NETXEN_NIC_LRO_DISABLED		0x00
 #define NETXEN_NIC_BRIDGE_ENABLED       0X10
 #define NETXEN_NIC_DIAG_ENABLED		0x20
 #define NETXEN_IS_MSI_FAMILY(adapter) \
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index b30de24f4a5..587498e140b 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -720,7 +720,21 @@ static u32 netxen_nic_get_rx_csum(struct net_device *dev)
 static int netxen_nic_set_rx_csum(struct net_device *dev, u32 data)
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
-	adapter->rx_csum = !!data;
+
+	if (data) {
+		adapter->rx_csum = data;
+		return 0;
+	}
+
+	if (dev->features & NETIF_F_LRO) {
+		if (netxen_config_hw_lro(adapter, NETXEN_NIC_LRO_DISABLED))
+			return -EIO;
+
+		dev->features &= ~NETIF_F_LRO;
+		netxen_send_lro_cleanup(adapter);
+		netdev_info(dev, "disabling LRO as rx_csum is off\n");
+	}
+	adapter->rx_csum = data;
 	return 0;
 }
 
@@ -893,11 +907,19 @@ static int netxen_nic_set_flags(struct net_device *netdev, u32 data)
 	if (!(adapter->capabilities & NX_FW_CAPABILITY_HW_LRO))
 		return -EINVAL;
 
+	if (!adapter->rx_csum) {
+		netdev_info(netdev, "rx csum is off, cannot toggle LRO\n");
+		return -EINVAL;
+	}
+
+	if (!!(data & ETH_FLAG_LRO) == !!(netdev->features & NETIF_F_LRO))
+		return 0;
+
 	if (data & ETH_FLAG_LRO) {
 		hw_lro = NETXEN_NIC_LRO_ENABLED;
 		netdev->features |= NETIF_F_LRO;
 	} else {
-		hw_lro = 0;
+		hw_lro = NETXEN_NIC_LRO_DISABLED;
 		netdev->features &= ~NETIF_F_LRO;
 	}
 
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 37d3ebd65be..5cef718fe35 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -655,7 +655,7 @@ nx_p3_sre_macaddr_change(struct netxen_adapter *adapter, u8 *addr, unsigned op)
 }
 
 static int nx_p3_nic_add_mac(struct netxen_adapter *adapter,
-		u8 *addr, struct list_head *del_list)
+		const u8 *addr, struct list_head *del_list)
 {
 	struct list_head *head;
 	nx_mac_list_t *cur;
@@ -686,7 +686,9 @@ static void netxen_p3_nic_set_multi(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
 	struct netdev_hw_addr *ha;
-	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+	static const u8 bcast_addr[ETH_ALEN] = {
+		0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	};
 	u32 mode = VPORT_MISS_MODE_DROP;
 	LIST_HEAD(del_list);
 	struct list_head *head;
@@ -807,9 +809,6 @@ int netxen_config_hw_lro(struct netxen_adapter *adapter, int enable)
 	u64 word;
 	int rv = 0;
 
-	if ((adapter->flags & NETXEN_NIC_LRO_ENABLED) == enable)
-		return 0;
-
 	memset(&req, 0, sizeof(nx_nic_req_t));
 
 	req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
@@ -825,8 +824,6 @@ int netxen_config_hw_lro(struct netxen_adapter *adapter, int enable)
 			"configure hw lro request\n");
 	}
 
-	adapter->flags ^= NETXEN_NIC_LRO_ENABLED;
-
 	return rv;
 }
 
@@ -869,9 +866,11 @@ int netxen_config_rss(struct netxen_adapter *adapter, int enable)
 	u64 word;
 	int i, rv;
 
-	u64 key[] = { 0xbeac01fa6a42b73bULL, 0x8030f20c77cb2da3ULL,
-			0xae7b30b4d0ca2bcbULL, 0x43a38fb04167253dULL,
-			0x255b0ec26d5a56daULL };
+	static const u64 key[] = {
+		0xbeac01fa6a42b73bULL, 0x8030f20c77cb2da3ULL,
+		0xae7b30b4d0ca2bcbULL, 0x43a38fb04167253dULL,
+		0x255b0ec26d5a56daULL
+	};
 
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
@@ -895,7 +894,7 @@ int netxen_config_rss(struct netxen_adapter *adapter, int enable)
 		((u64)(enable & 0x1) << 8) |
 		((0x7ULL) << 48);
 	req.words[0] = cpu_to_le64(word);
-	for (i = 0; i < 5; i++)
+	for (i = 0; i < ARRAY_SIZE(key); i++)
 		req.words[i+1] = cpu_to_le64(key[i]);
 
 
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 95fe552aa27..731077d8d96 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -214,13 +214,12 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 	tx_ring->num_desc = adapter->num_txd;
 	tx_ring->txq = netdev_get_tx_queue(netdev, 0);
 
-	cmd_buf_arr = vmalloc(TX_BUFF_RINGSIZE(tx_ring));
+	cmd_buf_arr = vzalloc(TX_BUFF_RINGSIZE(tx_ring));
 	if (cmd_buf_arr == NULL) {
 		dev_err(&pdev->dev, "%s: failed to allocate cmd buffer ring\n",
 		       netdev->name);
 		goto err_out;
 	}
-	memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring));
 	tx_ring->cmd_buf_arr = cmd_buf_arr;
 
 	recv_ctx = &adapter->recv_ctx;
@@ -279,8 +278,7 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 			break;
 
 		}
-		rds_ring->rx_buf_arr = (struct netxen_rx_buffer *)
-			vmalloc(RCV_BUFF_RINGSIZE(rds_ring));
+		rds_ring->rx_buf_arr = vzalloc(RCV_BUFF_RINGSIZE(rds_ring));
 		if (rds_ring->rx_buf_arr == NULL) {
 			printk(KERN_ERR "%s: Failed to allocate "
 				"rx buffer ring %d\n",
@@ -288,7 +286,6 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 			/* free whatever was already allocated */
 			goto err_out;
 		}
-		memset(rds_ring->rx_buf_arr, 0, RCV_BUFF_RINGSIZE(rds_ring));
 		INIT_LIST_HEAD(&rds_ring->free_list);
 		/*
 		 * Now go through all of them, set reference handles
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index e1d30d7f207..33fac32e0d9 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -38,7 +38,7 @@
 #include <linux/sysfs.h>
 #include <linux/aer.h>
 
-MODULE_DESCRIPTION("QLogic/NetXen (1/10) GbE Converged Ethernet Driver");
+MODULE_DESCRIPTION("QLogic/NetXen (1/10) GbE Intelligent Ethernet Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID);
 MODULE_FIRMWARE(NX_UNIFIED_ROMIMAGE_NAME);
@@ -762,8 +762,6 @@ netxen_check_options(struct netxen_adapter *adapter)
 	if (adapter->fw_version >= NETXEN_VERSION_CODE(4, 0, 222))
 		adapter->capabilities = NXRD32(adapter, CRB_FW_CAPABILITIES_1);
 
-	adapter->flags &= ~NETXEN_NIC_LRO_ENABLED;
-
 	if (adapter->ahw.port_type == NETXEN_NIC_XGBE) {
 		adapter->num_rxd = DEFAULT_RCV_DESCRIPTORS_10G;
 		adapter->num_jumbo_rxd = MAX_JUMBO_RCV_DESCRIPTORS_10G;
@@ -990,7 +988,7 @@ __netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev)
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		netxen_config_intr_coalesce(adapter);
 
-	if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO)
+	if (netdev->features & NETIF_F_LRO)
 		netxen_config_hw_lro(adapter, NETXEN_NIC_LRO_ENABLED);
 
 	netxen_napi_enable(adapter);
@@ -1277,6 +1275,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	int i = 0, err;
 	int pci_func_id = PCI_FUNC(pdev->devfn);
 	uint8_t revision_id;
+	u32 val;
 
 	if (pdev->revision >= NX_P3_A0 && pdev->revision <= NX_P3_B1) {
 		pr_warning("%s: chip revisions between 0x%x-0x%x "
@@ -1352,8 +1351,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	if (reset_devices) {
-		if (adapter->portnum == 0) {
+	if (adapter->portnum == 0) {
+		val = NXRD32(adapter, NX_CRB_DEV_REF_COUNT);
+		if (val != 0xffffffff && val != 0) {
 			NXWR32(adapter, NX_CRB_DEV_REF_COUNT, 0);
 			adapter->need_fw_reset = 1;
 		}
diff --git a/drivers/net/ni52.c b/drivers/net/ni52.c
index 33618edc61f..d973fc6c6b8 100644
--- a/drivers/net/ni52.c
+++ b/drivers/net/ni52.c
@@ -388,9 +388,9 @@ static long memend;	/* e.g 0xd4000 */
 struct net_device * __init ni52_probe(int unit)
 {
 	struct net_device *dev = alloc_etherdev(sizeof(struct priv));
-	static int ports[] = {0x300, 0x280, 0x360 , 0x320 , 0x340, 0};
+	static const int ports[] = {0x300, 0x280, 0x360, 0x320, 0x340, 0};
+	const int *port;
 	struct priv *p;
-	int *port;
 	int err = 0;
 
 	if (!dev)
diff --git a/drivers/net/ni65.c b/drivers/net/ni65.c
index da228a0dd6c..c75ae85eb91 100644
--- a/drivers/net/ni65.c
+++ b/drivers/net/ni65.c
@@ -361,8 +361,8 @@ static int dma;
 struct net_device * __init ni65_probe(int unit)
 {
 	struct net_device *dev = alloc_etherdev(0);
-	static int ports[] = {0x360,0x300,0x320,0x340, 0};
-	int *port;
+	static const int ports[] = { 0x360, 0x300, 0x320, 0x340, 0 };
+	const int *port;
 	int err = 0;
 
 	if (!dev)
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 781e368329f..2541321bad8 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -6589,7 +6589,7 @@ static u64 niu_compute_tx_flags(struct sk_buff *skb, struct ethhdr *ehdr,
 			     (ip_proto == IPPROTO_UDP ?
 			      TXHDR_CSUM_UDP : TXHDR_CSUM_SCTP));
 
-		start = skb_transport_offset(skb) -
+		start = skb_checksum_start_offset(skb) -
 			(pad_bytes + sizeof(struct tx_pkt_hdr));
 		stuff = start + skb->csum_offset;
 
@@ -9917,7 +9917,7 @@ static int niu_suspend(struct pci_dev *pdev, pm_message_t state)
 	if (!netif_running(dev))
 		return 0;
 
-	flush_scheduled_work();
+	flush_work_sync(&np->reset_task);
 	niu_netif_stop(np);
 
 	del_timer_sync(&np->timer);
diff --git a/drivers/net/pch_gbe/pch_gbe_ethtool.c b/drivers/net/pch_gbe/pch_gbe_ethtool.c
index c8cc32c0edc..c8c873b31a8 100644
--- a/drivers/net/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/pch_gbe/pch_gbe_ethtool.c
@@ -469,18 +469,6 @@ static int pch_gbe_set_rx_csum(struct net_device *netdev, u32 data)
 }
 
 /**
- * pch_gbe_get_tx_csum - Report whether transmit checksums are turned on or off
- * @netdev:  Network interface device structure
- * Returns
- *	true(1):  Checksum On
- *	false(0): Checksum Off
- */
-static u32 pch_gbe_get_tx_csum(struct net_device *netdev)
-{
-	return (netdev->features & NETIF_F_HW_CSUM) != 0;
-}
-
-/**
  * pch_gbe_set_tx_csum - Turn transmit checksums on or off
  * @netdev: Network interface device structure
  * @data:   Checksum on[true] or off[false]
@@ -493,11 +481,7 @@ static int pch_gbe_set_tx_csum(struct net_device *netdev, u32 data)
 	struct pch_gbe_adapter *adapter = netdev_priv(netdev);
 
 	adapter->tx_csum = data;
-	if (data)
-		netdev->features |= NETIF_F_HW_CSUM;
-	else
-		netdev->features &= ~NETIF_F_HW_CSUM;
-	return 0;
+	return ethtool_op_set_tx_ipv6_csum(netdev, data);
 }
 
 /**
@@ -572,7 +556,6 @@ static const struct ethtool_ops pch_gbe_ethtool_ops = {
 	.set_pauseparam = pch_gbe_set_pauseparam,
 	.get_rx_csum = pch_gbe_get_rx_csum,
 	.set_rx_csum = pch_gbe_set_rx_csum,
-	.get_tx_csum = pch_gbe_get_tx_csum,
 	.set_tx_csum = pch_gbe_set_tx_csum,
 	.get_strings = pch_gbe_get_strings,
 	.get_ethtool_stats = pch_gbe_get_ethtool_stats,
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index 472056b4744..d7355306a73 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
  *
  * This code was derived from the Intel e1000e Linux driver.
  *
@@ -1523,12 +1523,11 @@ int pch_gbe_setup_tx_resources(struct pch_gbe_adapter *adapter,
 	int desNo;
 
 	size = (int)sizeof(struct pch_gbe_buffer) * tx_ring->count;
-	tx_ring->buffer_info = vmalloc(size);
+	tx_ring->buffer_info = vzalloc(size);
 	if (!tx_ring->buffer_info) {
 		pr_err("Unable to allocate memory for the buffer infomation\n");
 		return -ENOMEM;
 	}
-	memset(tx_ring->buffer_info, 0, size);
 
 	tx_ring->size = tx_ring->count * (int)sizeof(struct pch_gbe_tx_desc);
 
@@ -1573,12 +1572,11 @@ int pch_gbe_setup_rx_resources(struct pch_gbe_adapter *adapter,
 	int desNo;
 
 	size = (int)sizeof(struct pch_gbe_buffer) * rx_ring->count;
-	rx_ring->buffer_info = vmalloc(size);
+	rx_ring->buffer_info = vzalloc(size);
 	if (!rx_ring->buffer_info) {
 		pr_err("Unable to allocate memory for the receive descriptor ring\n");
 		return -ENOMEM;
 	}
-	memset(rx_ring->buffer_info, 0, size);
 	rx_ring->size = rx_ring->count * (int)sizeof(struct pch_gbe_rx_desc);
 	rx_ring->desc =	dma_alloc_coherent(&pdev->dev, rx_ring->size,
 					   &rx_ring->dma, GFP_KERNEL);
@@ -2321,7 +2319,7 @@ static int pch_gbe_probe(struct pci_dev *pdev,
 	netdev->watchdog_timeo = PCH_GBE_WATCHDOG_PERIOD;
 	netif_napi_add(netdev, &adapter->napi,
 		       pch_gbe_napi_poll, PCH_GBE_RX_WEIGHT);
-	netdev->features = NETIF_F_HW_CSUM | NETIF_F_GRO;
+	netdev->features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_GRO;
 	pch_gbe_set_ethtool_ops(netdev);
 
 	pch_gbe_mac_reset_hw(&adapter->hw);
@@ -2360,9 +2358,9 @@ static int pch_gbe_probe(struct pci_dev *pdev,
 	pch_gbe_check_options(adapter);
 
 	if (adapter->tx_csum)
-		netdev->features |= NETIF_F_HW_CSUM;
+		netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	else
-		netdev->features &= ~NETIF_F_HW_CSUM;
+		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
 
 	/* initialize the wol settings based on the eeprom settings */
 	adapter->wake_up_evt = PCH_GBE_WL_INIT_SETTING;
@@ -2464,8 +2462,8 @@ static void __exit pch_gbe_exit_module(void)
 module_init(pch_gbe_init_module);
 module_exit(pch_gbe_exit_module);
 
-MODULE_DESCRIPTION("OKI semiconductor PCH Gigabit ethernet Driver");
-MODULE_AUTHOR("OKI semiconductor, <masa-korg@dsn.okisemi.com>");
+MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver");
+MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DEVICE_TABLE(pci, pch_gbe_pcidev_id);
diff --git a/drivers/net/pch_gbe/pch_gbe_param.c b/drivers/net/pch_gbe/pch_gbe_param.c
index 2510146fc56..ef0996a0eaa 100644
--- a/drivers/net/pch_gbe/pch_gbe_param.c
+++ b/drivers/net/pch_gbe/pch_gbe_param.c
@@ -434,8 +434,8 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
 			.err  = "using default of "
 				__MODULE_STRING(PCH_GBE_DEFAULT_TXD),
 			.def  = PCH_GBE_DEFAULT_TXD,
-			.arg  = { .r = { .min = PCH_GBE_MIN_TXD } },
-			.arg  = { .r = { .max = PCH_GBE_MAX_TXD } }
+			.arg  = { .r = { .min = PCH_GBE_MIN_TXD,
+					 .max = PCH_GBE_MAX_TXD } }
 		};
 		struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
 		tx_ring->count = TxDescriptors;
@@ -450,8 +450,8 @@ void pch_gbe_check_options(struct pch_gbe_adapter *adapter)
 			.err  = "using default of "
 				__MODULE_STRING(PCH_GBE_DEFAULT_RXD),
 			.def  = PCH_GBE_DEFAULT_RXD,
-			.arg  = { .r = { .min = PCH_GBE_MIN_RXD } },
-			.arg  = { .r = { .max = PCH_GBE_MAX_RXD } }
+			.arg  = { .r = { .min = PCH_GBE_MIN_RXD,
+					 .max = PCH_GBE_MAX_RXD } }
 		};
 		struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
 		rx_ring->count = RxDescriptors;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index d2e166e29dd..1f42f6ac855 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -111,13 +111,14 @@ static irqreturn_t ax_interrupt(int irq, void *dev_id);
 
 typedef struct axnet_dev_t {
 	struct pcmcia_device	*p_dev;
-    caddr_t		base;
-    struct timer_list	watchdog;
-    int			stale, fast_poll;
-    u_short		link_status;
-    u_char		duplex_flag;
-    int			phy_id;
-    int			flags;
+	caddr_t	base;
+	struct timer_list	watchdog;
+	int	stale, fast_poll;
+	u_short	link_status;
+	u_char	duplex_flag;
+	int	phy_id;
+	int	flags;
+	int	active_low;
 } axnet_dev_t;
 
 static inline axnet_dev_t *PRIV(struct net_device *dev)
@@ -322,6 +323,8 @@ static int axnet_config(struct pcmcia_device *link)
     if (info->flags & IS_AX88790)
 	outb(0x10, dev->base_addr + AXNET_GPIO);  /* select Internal PHY */
 
+    info->active_low = 0;
+
     for (i = 0; i < 32; i++) {
 	j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
 	j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
@@ -329,15 +332,18 @@ static int axnet_config(struct pcmcia_device *link)
 	if ((j != 0) && (j != 0xffff)) break;
     }
 
-    /* Maybe PHY is in power down mode. (PPD_SET = 1) 
-       Bit 2 of CCSR is active low. */ 
     if (i == 32) {
+	/* Maybe PHY is in power down mode. (PPD_SET = 1)
+	   Bit 2 of CCSR is active low. */
 	pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
 	for (i = 0; i < 32; i++) {
 	    j = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 1);
 	    j2 = mdio_read(dev->base_addr + AXNET_MII_EEP, i, 2);
 	    if (j == j2) continue;
-	    if ((j != 0) && (j != 0xffff)) break;
+	    if ((j != 0) && (j != 0xffff)) {
+		info->active_low = 1;
+		break;
+	    }
 	}
     }
 
@@ -383,8 +389,12 @@ static int axnet_suspend(struct pcmcia_device *link)
 static int axnet_resume(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
+	axnet_dev_t *info = PRIV(dev);
 
 	if (link->open) {
+		if (info->active_low == 1)
+			pcmcia_write_config_byte(link, CISREG_CCSR, 0x04);
+
 		axnet_reset_8390(dev);
 		AX88190_init(dev, 1);
 		netif_device_attach(dev);
@@ -680,6 +690,7 @@ static void block_output(struct net_device *dev, int count,
 static struct pcmcia_device_id axnet_ids[] = {
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x016c, 0x0081),
 	PCMCIA_DEVICE_MANF_CARD(0x018a, 0x0301),
+	PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0301),
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0303),
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0309),
@@ -865,7 +876,7 @@ static void do_set_multicast_list(struct net_device *dev);
 static int ax_open(struct net_device *dev)
 {
 	unsigned long flags;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 
 	/*
 	 *	Grab the page lock so we own the register set, then call
@@ -916,7 +927,7 @@ static int ax_close(struct net_device *dev)
 static void axnet_tx_timeout(struct net_device *dev)
 {
 	long e8390_base = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	int txsr, isr, tickssofar = jiffies - dev_trans_start(dev);
 	unsigned long flags;
 
@@ -963,7 +974,7 @@ static netdev_tx_t axnet_start_xmit(struct sk_buff *skb,
 					  struct net_device *dev)
 {
 	long e8390_base = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	int length, send_length, output_page;
 	unsigned long flags;
 	u8 packet[ETH_ZLEN];
@@ -1260,7 +1271,7 @@ static void ei_tx_err(struct net_device *dev)
 static void ei_tx_intr(struct net_device *dev)
 {
 	long e8390_base = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	int status = inb(e8390_base + EN0_TSR);
     
 	/*
@@ -1344,7 +1355,7 @@ static void ei_tx_intr(struct net_device *dev)
 static void ei_receive(struct net_device *dev)
 {
 	long e8390_base = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	unsigned char rxing_page, this_frame, next_frame;
 	unsigned short current_offset;
 	int rx_pkt_count = 0;
@@ -1529,7 +1540,7 @@ static void ei_rx_overrun(struct net_device *dev)
 static struct net_device_stats *get_stats(struct net_device *dev)
 {
 	long ioaddr = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	unsigned long flags;
     
 	/* If the card is stopped, just return the present stats. */
@@ -1578,7 +1589,7 @@ static void do_set_multicast_list(struct net_device *dev)
 {
 	long e8390_base = dev->base_addr;
 	int i;
-	struct ei_device *ei_local = (struct ei_device*)netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 
 	if (!(dev->flags&(IFF_PROMISC|IFF_ALLMULTI))) {
 		memset(ei_local->mcfilter, 0, 8);
@@ -1636,7 +1647,7 @@ static void AX88190_init(struct net_device *dev, int startp)
 {
 	axnet_dev_t *info = PRIV(dev);
 	long e8390_base = dev->base_addr;
-	struct ei_device *ei_local = (struct ei_device *) netdev_priv(dev);
+	struct ei_device *ei_local = netdev_priv(dev);
 	int i;
 	int endcfg = ei_local->word16 ? (0x48 | ENDCFG_WTS) : 0x48;
     
@@ -1702,7 +1713,7 @@ static void NS8390_trigger_send(struct net_device *dev, unsigned int length,
 								int start_page)
 {
 	long e8390_base = dev->base_addr;
- 	struct ei_device *ei_local __attribute((unused)) = (struct ei_device *) netdev_priv(dev);
+ 	struct ei_device *ei_local __attribute((unused)) = netdev_priv(dev);
     
 	if (inb_p(e8390_base) & E8390_TRANS) 
 	{
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index 0a2b0f9cdf3..76683d97d83 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -1291,7 +1291,7 @@ updateCRC
 
 static void updateCRC(int *CRC, int bit)
 {
-  int poly[]={
+  static const int poly[]={
     1,1,1,0, 1,1,0,1,
     1,0,1,1, 1,0,0,0,
     1,0,0,0, 0,0,1,1,
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index d05c44692f0..2c158910f7e 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1493,7 +1493,6 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x0149, 0x4530),
 	PCMCIA_DEVICE_MANF_CARD(0x0149, 0xc1ab),
 	PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0110),
-	PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x2328),
 	PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x8041),
 	PCMCIA_DEVICE_MANF_CARD(0x0213, 0x2452),
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0300),
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index cb3d13e4e07..35fda5ac812 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -64,7 +64,7 @@ config BCM63XX_PHY
 config ICPLUS_PHY
 	tristate "Drivers for ICPlus PHYs"
 	---help---
-	  Currently supports the IP175C PHY.
+	  Currently supports the IP175C and IP1001 PHYs.
 
 config REALTEK_PHY
 	tristate "Drivers for Realtek PHYs"
diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index c1d2d251fe8..9a09e24c30b 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -30,7 +30,7 @@
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
-MODULE_DESCRIPTION("ICPlus IP175C PHY driver");
+MODULE_DESCRIPTION("ICPlus IP175C/IC1001 PHY drivers");
 MODULE_AUTHOR("Michael Barkowski");
 MODULE_LICENSE("GPL");
 
@@ -89,6 +89,33 @@ static int ip175c_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int ip1001_config_init(struct phy_device *phydev)
+{
+	int err, value;
+
+	/* Software Reset PHY */
+	value = phy_read(phydev, MII_BMCR);
+	value |= BMCR_RESET;
+	err = phy_write(phydev, MII_BMCR, value);
+	if (err < 0)
+		return err;
+
+	do {
+		value = phy_read(phydev, MII_BMCR);
+	} while (value & BMCR_RESET);
+
+	/* Additional delay (2ns) used to adjust RX clock phase
+	 * at GMII/ RGMII interface */
+	value = phy_read(phydev, 16);
+	value |= 0x3;
+
+	err = phy_write(phydev, 16, value);
+	if (err < 0)
+		return err;
+
+	return err;
+}
+
 static int ip175c_read_status(struct phy_device *phydev)
 {
 	if (phydev->addr == 4) /* WAN port */
@@ -121,21 +148,43 @@ static struct phy_driver ip175c_driver = {
 	.driver		= { .owner = THIS_MODULE,},
 };
 
-static int __init ip175c_init(void)
+static struct phy_driver ip1001_driver = {
+	.phy_id		= 0x02430d90,
+	.name		= "ICPlus IP1001",
+	.phy_id_mask	= 0x0ffffff0,
+	.features	= PHY_GBIT_FEATURES | SUPPORTED_Pause |
+			  SUPPORTED_Asym_Pause,
+	.config_init	= &ip1001_config_init,
+	.config_aneg	= &genphy_config_aneg,
+	.read_status	= &genphy_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.driver		= { .owner = THIS_MODULE,},
+};
+
+static int __init icplus_init(void)
 {
+	int ret = 0;
+
+	ret = phy_driver_register(&ip1001_driver);
+	if (ret < 0)
+		return -ENODEV;
+
 	return phy_driver_register(&ip175c_driver);
 }
 
-static void __exit ip175c_exit(void)
+static void __exit icplus_exit(void)
 {
+	phy_driver_unregister(&ip1001_driver);
 	phy_driver_unregister(&ip175c_driver);
 }
 
-module_init(ip175c_init);
-module_exit(ip175c_exit);
+module_init(icplus_init);
+module_exit(icplus_exit);
 
 static struct mdio_device_id __maybe_unused icplus_tbl[] = {
 	{ 0x02430d80, 0x0ffffff0 },
+	{ 0x02430d90, 0x0ffffff0 },
 	{ }
 };
 
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index f0bd1a1aba3..e8b9c53c304 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -30,11 +30,14 @@
 #include <linux/ethtool.h>
 #include <linux/phy.h>
 #include <linux/marvell_phy.h>
+#include <linux/of.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 
+#define MII_MARVELL_PHY_PAGE		22
+
 #define MII_M1011_IEVENT		0x13
 #define MII_M1011_IEVENT_CLEAR		0x0000
 
@@ -80,7 +83,6 @@
 #define MII_88E1121_PHY_LED_CTRL	16
 #define MII_88E1121_PHY_LED_PAGE	3
 #define MII_88E1121_PHY_LED_DEF		0x0030
-#define MII_88E1121_PHY_PAGE		22
 
 #define MII_M1011_PHY_STATUS		0x11
 #define MII_M1011_PHY_STATUS_1000	0x8000
@@ -186,13 +188,94 @@ static int marvell_config_aneg(struct phy_device *phydev)
 	return 0;
 }
 
+#ifdef CONFIG_OF_MDIO
+/*
+ * Set and/or override some configuration registers based on the
+ * marvell,reg-init property stored in the of_node for the phydev.
+ *
+ * marvell,reg-init = <reg-page reg mask value>,...;
+ *
+ * There may be one or more sets of <reg-page reg mask value>:
+ *
+ * reg-page: which register bank to use.
+ * reg: the register.
+ * mask: if non-zero, ANDed with existing register value.
+ * value: ORed with the masked value and written to the regiser.
+ *
+ */
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+	const __be32 *paddr;
+	int len, i, saved_page, current_page, page_changed, ret;
+
+	if (!phydev->dev.of_node)
+		return 0;
+
+	paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len);
+	if (!paddr || len < (4 * sizeof(*paddr)))
+		return 0;
+
+	saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+	if (saved_page < 0)
+		return saved_page;
+	page_changed = 0;
+	current_page = saved_page;
+
+	ret = 0;
+	len /= sizeof(*paddr);
+	for (i = 0; i < len - 3; i += 4) {
+		u16 reg_page = be32_to_cpup(paddr + i);
+		u16 reg = be32_to_cpup(paddr + i + 1);
+		u16 mask = be32_to_cpup(paddr + i + 2);
+		u16 val_bits = be32_to_cpup(paddr + i + 3);
+		int val;
+
+		if (reg_page != current_page) {
+			current_page = reg_page;
+			page_changed = 1;
+			ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
+			if (ret < 0)
+				goto err;
+		}
+
+		val = 0;
+		if (mask) {
+			val = phy_read(phydev, reg);
+			if (val < 0) {
+				ret = val;
+				goto err;
+			}
+			val &= mask;
+		}
+		val |= val_bits;
+
+		ret = phy_write(phydev, reg, val);
+		if (ret < 0)
+			goto err;
+
+	}
+err:
+	if (page_changed) {
+		i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
+		if (ret == 0)
+			ret = i;
+	}
+	return ret;
+}
+#else
+static int marvell_of_reg_init(struct phy_device *phydev)
+{
+	return 0;
+}
+#endif /* CONFIG_OF_MDIO */
+
 static int m88e1121_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
 			MII_88E1121_PHY_MSCR_PAGE);
 	if (err < 0)
 		return err;
@@ -218,7 +301,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 			return err;
 	}
 
-	phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 
 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 	if (err < 0)
@@ -229,11 +312,11 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	phy_write(phydev, MII_88E1121_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
 	phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
-	phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 
 	err = genphy_config_aneg(phydev);
 
@@ -244,9 +327,9 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
 {
 	int err, oldpage, mscr;
 
-	oldpage = phy_read(phydev, MII_88E1121_PHY_PAGE);
+	oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE,
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
 			MII_88E1121_PHY_MSCR_PAGE);
 	if (err < 0)
 		return err;
@@ -258,7 +341,7 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
-	err = phy_write(phydev, MII_88E1121_PHY_PAGE, oldpage);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
 	if (err < 0)
 		return err;
 
@@ -368,6 +451,9 @@ static int m88e1111_config_init(struct phy_device *phydev)
 			return err;
 	}
 
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
 
 	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
 	if (err < 0)
@@ -398,7 +484,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	int err;
 
 	/* Change address */
-	err = phy_write(phydev, 0x16, 0x0002);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
 	if (err < 0)
 		return err;
 
@@ -408,7 +494,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
 		return err;
 
 	/* Change address */
-	err = phy_write(phydev, 0x16, 0x0003);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003);
 	if (err < 0)
 		return err;
 
@@ -420,8 +506,42 @@ static int m88e1118_config_init(struct phy_device *phydev)
 	if (err < 0)
 		return err;
 
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
+
 	/* Reset address */
-	err = phy_write(phydev, 0x16, 0x0);
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int m88e1149_config_init(struct phy_device *phydev)
+{
+	int err;
+
+	/* Change address */
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
+	if (err < 0)
+		return err;
+
+	/* Enable 1000 Mbit */
+	err = phy_write(phydev, 0x15, 0x1048);
+	if (err < 0)
+		return err;
+
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
+
+	/* Reset address */
+	err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
 	if (err < 0)
 		return err;
 
@@ -491,6 +611,10 @@ static int m88e1145_config_init(struct phy_device *phydev)
 		}
 	}
 
+	err = marvell_of_reg_init(phydev);
+	if (err < 0)
+		return err;
+
 	return 0;
 }
 
@@ -685,6 +809,19 @@ static struct phy_driver marvell_drivers[] = {
 		.driver = { .owner = THIS_MODULE },
 	},
 	{
+		.phy_id = MARVELL_PHY_ID_88E1149R,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
+		.name = "Marvell 88E1149R",
+		.features = PHY_GBIT_FEATURES,
+		.flags = PHY_HAS_INTERRUPT,
+		.config_init = &m88e1149_config_init,
+		.config_aneg = &m88e1118_config_aneg,
+		.read_status = &genphy_read_status,
+		.ack_interrupt = &marvell_ack_interrupt,
+		.config_intr = &marvell_config_intr,
+		.driver = { .owner = THIS_MODULE },
+	},
+	{
 		.phy_id = MARVELL_PHY_ID_88E1240,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1240",
@@ -735,6 +872,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = {
 	{ 0x01410e10, 0xfffffff0 },
 	{ 0x01410cb0, 0xfffffff0 },
 	{ 0x01410cd0, 0xfffffff0 },
+	{ 0x01410e50, 0xfffffff0 },
 	{ 0x01410e30, 0xfffffff0 },
 	{ 0x01410e90, 0xfffffff0 },
 	{ }
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 7670aac0e93..a8445c72fc1 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -47,11 +47,11 @@ void phy_print_status(struct phy_device *phydev)
 	pr_info("PHY: %s - Link is %s", dev_name(&phydev->dev),
 			phydev->link ? "Up" : "Down");
 	if (phydev->link)
-		printk(" - %d/%s", phydev->speed,
+		printk(KERN_CONT " - %d/%s", phydev->speed,
 				DUPLEX_FULL == phydev->duplex ?
 				"Full" : "Half");
 
-	printk("\n");
+	printk(KERN_CONT "\n");
 }
 EXPORT_SYMBOL(phy_print_status);
 
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 09cf56d0416..6456484c029 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1136,8 +1136,7 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
 		   a four-byte PPP header on each packet */
 		*skb_push(skb, 2) = 1;
 		if (ppp->pass_filter &&
-		    sk_run_filter(skb, ppp->pass_filter,
-				  ppp->pass_len) == 0) {
+		    sk_run_filter(skb, ppp->pass_filter) == 0) {
 			if (ppp->debug & 1)
 				printk(KERN_DEBUG "PPP: outbound frame not passed\n");
 			kfree_skb(skb);
@@ -1145,8 +1144,7 @@ ppp_send_frame(struct ppp *ppp, struct sk_buff *skb)
 		}
 		/* if this packet passes the active filter, record the time */
 		if (!(ppp->active_filter &&
-		      sk_run_filter(skb, ppp->active_filter,
-				    ppp->active_len) == 0))
+		      sk_run_filter(skb, ppp->active_filter) == 0))
 			ppp->last_xmit = jiffies;
 		skb_pull(skb, 2);
 #else
@@ -1285,6 +1283,11 @@ ppp_push(struct ppp *ppp)
 }
 
 #ifdef CONFIG_PPP_MULTILINK
+static bool mp_protocol_compress __read_mostly = true;
+module_param(mp_protocol_compress, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(mp_protocol_compress,
+		 "compress protocol id in multilink fragments");
+
 /*
  * Divide a packet to be transmitted into fragments and
  * send them out the individual links.
@@ -1347,10 +1350,10 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 	if (nfree == 0 || nfree < navail / 2)
 		return 0; /* can't take now, leave it in xmit_pending */
 
-	/* Do protocol field compression (XXX this should be optional) */
+	/* Do protocol field compression */
 	p = skb->data;
 	len = skb->len;
-	if (*p == 0) {
+	if (*p == 0 && mp_protocol_compress) {
 		++p;
 		--len;
 	}
@@ -1758,8 +1761,7 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb)
 
 			*skb_push(skb, 2) = 0;
 			if (ppp->pass_filter &&
-			    sk_run_filter(skb, ppp->pass_filter,
-					  ppp->pass_len) == 0) {
+			    sk_run_filter(skb, ppp->pass_filter) == 0) {
 				if (ppp->debug & 1)
 					printk(KERN_DEBUG "PPP: inbound frame "
 					       "not passed\n");
@@ -1767,8 +1769,7 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb)
 				return;
 			}
 			if (!(ppp->active_filter &&
-			      sk_run_filter(skb, ppp->active_filter,
-					    ppp->active_len) == 0))
+			      sk_run_filter(skb, ppp->active_filter) == 0))
 				ppp->last_recv = jiffies;
 			__skb_pull(skb, 2);
 		} else
@@ -2584,16 +2585,16 @@ ppp_create_interface(struct net *net, int unit, int *retp)
 	 */
 	dev_net_set(dev, net);
 
-	ret = -EEXIST;
 	mutex_lock(&pn->all_ppp_mutex);
 
 	if (unit < 0) {
 		unit = unit_get(&pn->units_idr, ppp);
 		if (unit < 0) {
-			*retp = unit;
+			ret = unit;
 			goto out2;
 		}
 	} else {
+		ret = -EEXIST;
 		if (unit_find(&pn->units_idr, unit))
 			goto out2; /* unit already exists */
 		/*
@@ -2668,10 +2669,10 @@ static void ppp_shutdown_interface(struct ppp *ppp)
 		ppp->closing = 1;
 		ppp_unlock(ppp);
 		unregister_netdev(ppp->dev);
+		unit_put(&pn->units_idr, ppp->file.index);
 	} else
 		ppp_unlock(ppp);
 
-	unit_put(&pn->units_idr, ppp->file.index);
 	ppp->file.dead = 1;
 	ppp->owner = NULL;
 	wake_up_interruptible(&ppp->file.rwait);
@@ -2859,8 +2860,7 @@ static void __exit ppp_cleanup(void)
  * by holding all_ppp_mutex
  */
 
-/* associate pointer with specified number */
-static int unit_set(struct idr *p, void *ptr, int n)
+static int __unit_alloc(struct idr *p, void *ptr, int n)
 {
 	int unit, err;
 
@@ -2871,10 +2871,24 @@ again:
 	}
 
 	err = idr_get_new_above(p, ptr, n, &unit);
-	if (err == -EAGAIN)
-		goto again;
+	if (err < 0) {
+		if (err == -EAGAIN)
+			goto again;
+		return err;
+	}
 
-	if (unit != n) {
+	return unit;
+}
+
+/* associate pointer with specified number */
+static int unit_set(struct idr *p, void *ptr, int n)
+{
+	int unit;
+
+	unit = __unit_alloc(p, ptr, n);
+	if (unit < 0)
+		return unit;
+	else if (unit != n) {
 		idr_remove(p, unit);
 		return -EINVAL;
 	}
@@ -2885,19 +2899,7 @@ again:
 /* get new free unit number and associate pointer with it */
 static int unit_get(struct idr *p, void *ptr)
 {
-	int unit, err;
-
-again:
-	if (!idr_pre_get(p, GFP_KERNEL)) {
-		printk(KERN_ERR "PPP: No free memory for idr\n");
-		return -ENOMEM;
-	}
-
-	err = idr_get_new_above(p, ptr, 0, &unit);
-	if (err == -EAGAIN)
-		goto again;
-
-	return unit;
+	return __unit_alloc(p, ptr, 0);
 }
 
 /* put unit number back to a pool */
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index d72fb0519a2..78c0e3c9b2b 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -948,7 +948,7 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb)
 
 abort:
 	kfree_skb(skb);
-	return 0;
+	return 1;
 }
 
 /************************************************************************
diff --git a/drivers/net/pptp.c b/drivers/net/pptp.c
index ccbc91326bf..164cfad6ce7 100644
--- a/drivers/net/pptp.c
+++ b/drivers/net/pptp.c
@@ -277,7 +277,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	iph->tos      = 0;
 	iph->daddr    = rt->rt_dst;
 	iph->saddr    = rt->rt_src;
-	iph->ttl      = dst_metric(&rt->dst, RTAX_HOPLIMIT);
+	iph->ttl      = ip4_dst_hoplimit(&rt->dst);
 	iph->tot_len  = htons(skb->len);
 
 	skb_dst_drop(skb);
@@ -673,8 +673,7 @@ static int __init pptp_init_module(void)
 	int err = 0;
 	pr_info("PPTP driver version " PPTP_DRIVER_VERSION "\n");
 
-	callid_sock = __vmalloc((MAX_CALLID + 1) * sizeof(void *),
-		GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+	callid_sock = vzalloc((MAX_CALLID + 1) * sizeof(void *));
 	if (!callid_sock) {
 		pr_err("PPTP: cann't allocate memory\n");
 		return -ENOMEM;
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c
index 18c0297743f..1b63c8aef12 100644
--- a/drivers/net/pxa168_eth.c
+++ b/drivers/net/pxa168_eth.c
@@ -1450,16 +1450,11 @@ static void pxa168_get_drvinfo(struct net_device *dev,
 	strncpy(info->bus_info, "N/A", 32);
 }
 
-static u32 pxa168_get_link(struct net_device *dev)
-{
-	return !!netif_carrier_ok(dev);
-}
-
 static const struct ethtool_ops pxa168_ethtool_ops = {
 	.get_settings = pxa168_get_settings,
 	.set_settings = pxa168_set_settings,
 	.get_drvinfo = pxa168_get_drvinfo,
-	.get_link = pxa168_get_link,
+	.get_link = ethtool_op_get_link,
 };
 
 static const struct net_device_ops pxa168_eth_netdev_ops = {
@@ -1607,7 +1602,7 @@ static int pxa168_eth_remove(struct platform_device *pdev)
 	mdiobus_unregister(pep->smi_bus);
 	mdiobus_free(pep->smi_bus);
 	unregister_netdev(dev);
-	flush_scheduled_work();
+	cancel_work_sync(&pep->tx_timeout_task);
 	free_netdev(dev);
 	platform_set_drvdata(pdev, NULL);
 	return 0;
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 7496ed2c34a..1a3584edd79 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -2467,7 +2467,7 @@ map_error:
 static netdev_tx_t ql3xxx_send(struct sk_buff *skb,
 			       struct net_device *ndev)
 {
-	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
+	struct ql3_adapter *qdev = netdev_priv(ndev);
 	struct ql3xxx_port_registers __iomem *port_regs =
 			qdev->mem_map_registers;
 	struct ql_tx_buf_cb *tx_cb;
@@ -3390,7 +3390,7 @@ static void ql_set_mac_info(struct ql3_adapter *qdev)
 
 static void ql_display_dev_info(struct net_device *ndev)
 {
-	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
+	struct ql3_adapter *qdev = netdev_priv(ndev);
 	struct pci_dev *pdev = qdev->pdev;
 
 	netdev_info(ndev,
@@ -3573,7 +3573,7 @@ static int ql3xxx_open(struct net_device *ndev)
 
 static int ql3xxx_set_mac_address(struct net_device *ndev, void *p)
 {
-	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
+	struct ql3_adapter *qdev = netdev_priv(ndev);
 	struct ql3xxx_port_registers __iomem *port_regs =
 			qdev->mem_map_registers;
 	struct sockaddr *addr = p;
@@ -3608,7 +3608,7 @@ static int ql3xxx_set_mac_address(struct net_device *ndev, void *p)
 
 static void ql3xxx_tx_timeout(struct net_device *ndev)
 {
-	struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
+	struct ql3_adapter *qdev = netdev_priv(ndev);
 
 	netdev_err(ndev, "Resetting...\n");
 	/*
diff --git a/drivers/net/qlcnic/qlcnic.h b/drivers/net/qlcnic/qlcnic.h
index 8ecc170c9b7..9c2a02d204d 100644
--- a/drivers/net/qlcnic/qlcnic.h
+++ b/drivers/net/qlcnic/qlcnic.h
@@ -1,25 +1,8 @@
 /*
- * Copyright (C) 2009 - QLogic Corporation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called "COPYING".
+ * QLogic qlcnic NIC Driver
+ * Copyright (c)  2009-2010 QLogic Corporation
  *
+ * See LICENSE.qlcnic for copyright and licensing details.
  */
 
 #ifndef _QLCNIC_H_
@@ -51,8 +34,8 @@
 
 #define _QLCNIC_LINUX_MAJOR 5
 #define _QLCNIC_LINUX_MINOR 0
-#define _QLCNIC_LINUX_SUBVERSION 11
-#define QLCNIC_LINUX_VERSIONID  "5.0.11"
+#define _QLCNIC_LINUX_SUBVERSION 14
+#define QLCNIC_LINUX_VERSIONID  "5.0.14"
 #define QLCNIC_DRV_IDC_VER  0x01
 #define QLCNIC_DRIVER_VERSION  ((_QLCNIC_LINUX_MAJOR << 16) |\
 		 (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
@@ -798,7 +781,6 @@ struct qlcnic_nic_intr_coalesce {
 #define QLCNIC_H2C_OPCODE_GET_NET_STATS 		16
 #define QLCNIC_H2C_OPCODE_PROXY_UPDATE_P2V		17
 #define QLCNIC_H2C_OPCODE_CONFIG_IPADDR 		18
-#define QLCNIC_H2C_OPCODE_CONFIG_LOOPBACK		19
 #define QLCNIC_H2C_OPCODE_PROXY_STOP_DONE		20
 #define QLCNIC_H2C_OPCODE_GET_LINKEVENT 		21
 #define QLCNIC_C2C_OPCODE				22
@@ -923,6 +905,7 @@ struct qlcnic_ipaddr {
 #define QLCNIC_MACSPOOF			0x200
 #define QLCNIC_MAC_OVERRIDE_DISABLED	0x400
 #define QLCNIC_PROMISC_DISABLED		0x800
+#define QLCNIC_NEED_FLR			0x1000
 #define QLCNIC_IS_MSI_FAMILY(adapter) \
 	((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
 
@@ -942,6 +925,7 @@ struct qlcnic_ipaddr {
 
 #define QLCNIC_INTERRUPT_TEST		1
 #define QLCNIC_LOOPBACK_TEST		2
+#define QLCNIC_LED_TEST		3
 
 #define QLCNIC_FILTER_AGE	80
 #define QLCNIC_READD_AGE	20
@@ -1126,8 +1110,7 @@ struct qlcnic_eswitch {
 /* Return codes for Error handling */
 #define QL_STATUS_INVALID_PARAM	-1
 
-#define MAX_BW			100
-#define MIN_BW			1
+#define MAX_BW			100	/* % of link speed */
 #define MAX_VLAN_ID		4095
 #define MIN_VLAN_ID		2
 #define MAX_TX_QUEUES		1
@@ -1135,7 +1118,7 @@ struct qlcnic_eswitch {
 #define DEFAULT_MAC_LEARN	1
 
 #define IS_VALID_VLAN(vlan)	(vlan >= MIN_VLAN_ID && vlan < MAX_VLAN_ID)
-#define IS_VALID_BW(bw)		(bw >= MIN_BW && bw <= MAX_BW)
+#define IS_VALID_BW(bw)		(bw <= MAX_BW)
 #define IS_VALID_TX_QUEUES(que)	(que > 0 && que <= MAX_TX_QUEUES)
 #define IS_VALID_RX_QUEUES(que)	(que > 0 && que <= MAX_RX_QUEUES)
 
@@ -1314,21 +1297,15 @@ int qlcnic_config_bridged_mode(struct qlcnic_adapter *adapter, u32 enable);
 int qlcnic_send_lro_cleanup(struct qlcnic_adapter *adapter);
 void qlcnic_update_cmd_producer(struct qlcnic_adapter *adapter,
 		struct qlcnic_host_tx_ring *tx_ring);
-void qlcnic_clear_ilb_mode(struct qlcnic_adapter *adapter);
-int qlcnic_set_ilb_mode(struct qlcnic_adapter *adapter);
 void qlcnic_fetch_mac(struct qlcnic_adapter *, u32, u32, u8, u8 *);
 
 /* Functions from qlcnic_main.c */
-int qlcnic_request_quiscent_mode(struct qlcnic_adapter *adapter);
-void qlcnic_clear_quiscent_mode(struct qlcnic_adapter *adapter);
 int qlcnic_reset_context(struct qlcnic_adapter *);
 u32 qlcnic_issue_cmd(struct qlcnic_adapter *adapter,
 	u32 pci_fn, u32 version, u32 arg1, u32 arg2, u32 arg3, u32 cmd);
 void qlcnic_diag_free_res(struct net_device *netdev, int max_sds_rings);
 int qlcnic_diag_alloc_res(struct net_device *netdev, int test);
-int qlcnic_check_loopback_buff(unsigned char *data);
 netdev_tx_t qlcnic_xmit_frame(struct sk_buff *skb, struct net_device *netdev);
-void qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring);
 
 /* Management functions */
 int qlcnic_get_mac_address(struct qlcnic_adapter *, u8*);
@@ -1377,6 +1354,8 @@ static const struct qlcnic_brdinfo qlcnic_boards[] = {
 		"3200 Series Single Port 10Gb Intelligent Ethernet Adapter"},
 	{0x1077, 0x8020, 0x103c, 0x3733,
 		"NC523SFP 10Gb 2-port Server Adapter"},
+	{0x1077, 0x8020, 0x103c, 0x3346,
+		"CN1000Q Dual Port Converged Network Adapter"},
 	{0x1077, 0x8020, 0x0, 0x0, "cLOM8214 1/10GbE Controller"},
 };
 
diff --git a/drivers/net/qlcnic/qlcnic_ctx.c b/drivers/net/qlcnic/qlcnic_ctx.c
index 1cdc05dade6..27631f23b3f 100644
--- a/drivers/net/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/qlcnic/qlcnic_ctx.c
@@ -1,25 +1,8 @@
 /*
- * Copyright (C) 2009 - QLogic Corporation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called "COPYING".
+ * QLogic qlcnic NIC Driver
+ * Copyright (c)  2009-2010 QLogic Corporation
  *
+ * See LICENSE.qlcnic for copyright and licensing details.
  */
 
 #include "qlcnic.h"
@@ -480,6 +463,11 @@ int qlcnic_fw_create_ctx(struct qlcnic_adapter *adapter)
 {
 	int err;
 
+	if (adapter->flags & QLCNIC_NEED_FLR) {
+		pci_reset_function(adapter->pdev);
+		adapter->flags &= ~QLCNIC_NEED_FLR;
+	}
+
 	err = qlcnic_fw_cmd_create_rx_ctx(adapter);
 	if (err)
 		return err;
diff --git a/drivers/net/qlcnic/qlcnic_ethtool.c b/drivers/net/qlcnic/qlcnic_ethtool.c
index ec21d24015c..1e7af709d39 100644
--- a/drivers/net/qlcnic/qlcnic_ethtool.c
+++ b/drivers/net/qlcnic/qlcnic_ethtool.c
@@ -1,25 +1,8 @@
 /*
- * Copyright (C) 2009 - QLogic Corporation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called "COPYING".
+ * QLogic qlcnic NIC Driver
+ * Copyright (c)  2009-2010 QLogic Corporation
  *
+ * See LICENSE.qlcnic for copyright and licensing details.
  */
 
 #include <linux/types.h>
@@ -101,8 +84,7 @@ static const char qlcnic_device_gstrings_stats[][ETH_GSTRING_LEN] = {
 static const char qlcnic_gstrings_test[][ETH_GSTRING_LEN] = {
 	"Register_Test_on_offline",
 	"Link_Test_on_offline",
-	"Interrupt_Test_offline",
-	"Loopback_Test_offline"
+	"Interrupt_Test_offline"
 };
 
 #define QLCNIC_TEST_LEN	ARRAY_SIZE(qlcnic_gstrings_test)
@@ -643,104 +625,6 @@ static int qlcnic_get_sset_count(struct net_device *dev, int sset)
 	}
 }
 
-#define QLC_ILB_PKT_SIZE 64
-#define QLC_NUM_ILB_PKT	16
-#define QLC_ILB_MAX_RCV_LOOP 10
-
-static void qlcnic_create_loopback_buff(unsigned char *data)
-{
-	unsigned char random_data[] = {0xa8, 0x06, 0x45, 0x00};
-	memset(data, 0x4e, QLC_ILB_PKT_SIZE);
-	memset(data, 0xff, 12);
-	memcpy(data + 12, random_data, sizeof(random_data));
-}
-
-int qlcnic_check_loopback_buff(unsigned char *data)
-{
-	unsigned char buff[QLC_ILB_PKT_SIZE];
-	qlcnic_create_loopback_buff(buff);
-	return memcmp(data, buff, QLC_ILB_PKT_SIZE);
-}
-
-static int qlcnic_do_ilb_test(struct qlcnic_adapter *adapter)
-{
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
-	struct qlcnic_host_sds_ring *sds_ring = &recv_ctx->sds_rings[0];
-	struct sk_buff *skb;
-	int i, loop, cnt = 0;
-
-	for (i = 0; i < QLC_NUM_ILB_PKT; i++) {
-		skb = dev_alloc_skb(QLC_ILB_PKT_SIZE);
-		qlcnic_create_loopback_buff(skb->data);
-		skb_put(skb, QLC_ILB_PKT_SIZE);
-
-		adapter->diag_cnt = 0;
-		qlcnic_xmit_frame(skb, adapter->netdev);
-
-		loop = 0;
-		do {
-			msleep(1);
-			qlcnic_process_rcv_ring_diag(sds_ring);
-		} while (loop++ < QLC_ILB_MAX_RCV_LOOP &&
-			 !adapter->diag_cnt);
-
-		dev_kfree_skb_any(skb);
-
-		if (!adapter->diag_cnt)
-			dev_warn(&adapter->pdev->dev, "ILB Test: %dth packet"
-				" not recevied\n", i + 1);
-		else
-			cnt++;
-	}
-	if (cnt != i) {
-		dev_warn(&adapter->pdev->dev, "ILB Test failed\n");
-		return -1;
-	}
-	return 0;
-}
-
-static int qlcnic_loopback_test(struct net_device *netdev)
-{
-	struct qlcnic_adapter *adapter = netdev_priv(netdev);
-	int max_sds_rings = adapter->max_sds_rings;
-	int ret;
-
-	if (adapter->op_mode == QLCNIC_NON_PRIV_FUNC) {
-		dev_warn(&adapter->pdev->dev, "Loopback test not supported"
-				"for non privilege function\n");
-		return 0;
-	}
-
-	if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
-		return -EIO;
-
-	if (qlcnic_request_quiscent_mode(adapter)) {
-		clear_bit(__QLCNIC_RESETTING, &adapter->state);
-		return -EIO;
-	}
-
-	ret = qlcnic_diag_alloc_res(netdev, QLCNIC_LOOPBACK_TEST);
-	if (ret)
-		goto clear_it;
-
-	ret = qlcnic_set_ilb_mode(adapter);
-	if (ret)
-		goto done;
-
-	ret = qlcnic_do_ilb_test(adapter);
-
-	qlcnic_clear_ilb_mode(adapter);
-
-done:
-	qlcnic_diag_free_res(netdev, max_sds_rings);
-
-clear_it:
-	qlcnic_clear_quiscent_mode(adapter);
-	adapter->max_sds_rings = max_sds_rings;
-	clear_bit(__QLCNIC_RESETTING, &adapter->state);
-	return ret;
-}
-
 static int qlcnic_irq_test(struct net_device *netdev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
@@ -793,9 +677,6 @@ qlcnic_diag_test(struct net_device *dev, struct ethtool_test *eth_test,
 		if (data[2])
 			eth_test->flags |= ETH_TEST_FL_FAILED;
 
-		data[3] = qlcnic_loopback_test(dev);
-		if (data[3])
-			eth_test->flags |= ETH_TEST_FL_FAILED;
 
 	}
 }
@@ -925,9 +806,10 @@ static int qlcnic_set_rx_csum(struct net_device *dev, u32 data)
 
 		dev->features &= ~NETIF_F_LRO;
 		qlcnic_send_lro_cleanup(adapter);
+		dev_info(&adapter->pdev->dev,
+					"disabling LRO as rx_csum is off\n");
 	}
 	adapter->rx_csum = !!data;
-	dev_info(&adapter->pdev->dev, "disabling LRO as rx_csum is off\n");
 	return 0;
 }
 
@@ -952,16 +834,27 @@ static int qlcnic_set_tso(struct net_device *dev, u32 data)
 static int qlcnic_blink_led(struct net_device *dev, u32 val)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(dev);
+	int max_sds_rings = adapter->max_sds_rings;
+	int dev_down = 0;
 	int ret;
 
-	if (!test_bit(__QLCNIC_DEV_UP, &adapter->state))
-		return -EIO;
+	if (!test_bit(__QLCNIC_DEV_UP, &adapter->state)) {
+		dev_down = 1;
+		if (test_and_set_bit(__QLCNIC_RESETTING, &adapter->state))
+			return -EIO;
+
+		ret = qlcnic_diag_alloc_res(dev, QLCNIC_LED_TEST);
+		if (ret) {
+			clear_bit(__QLCNIC_RESETTING, &adapter->state);
+			return ret;
+		}
+	}
 
 	ret = adapter->nic_ops->config_led(adapter, 1, 0xf);
 	if (ret) {
 		dev_err(&adapter->pdev->dev,
 			"Failed to set LED blink state.\n");
-		return ret;
+		goto done;
 	}
 
 	msleep_interruptible(val * 1000);
@@ -970,10 +863,16 @@ static int qlcnic_blink_led(struct net_device *dev, u32 val)
 	if (ret) {
 		dev_err(&adapter->pdev->dev,
 			"Failed to reset LED blink state.\n");
-		return ret;
+		goto done;
 	}
 
-	return 0;
+done:
+	if (dev_down) {
+		qlcnic_diag_free_res(dev, max_sds_rings);
+		clear_bit(__QLCNIC_RESETTING, &adapter->state);
+	}
+	return ret;
+
 }
 
 static void
diff --git a/drivers/net/qlcnic/qlcnic_hdr.h b/drivers/net/qlcnic/qlcnic_hdr.h
index 4290b80cde1..726ef555b6b 100644
--- a/drivers/net/qlcnic/qlcnic_hdr.h
+++ b/drivers/net/qlcnic/qlcnic_hdr.h
@@ -1,25 +1,8 @@
 /*
- * Copyright (C) 2009 - QLogic Corporation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called "COPYING".
+ * QLogic qlcnic NIC Driver
+ * Copyright (c)  2009-2010 QLogic Corporation
  *
+ * See LICENSE.qlcnic for copyright and licensing details.
  */
 
 #ifndef __QLCNIC_HDR_H_
@@ -638,7 +621,7 @@ enum {
 #define PCIX_INT_MASK		(0x10104)
 
 #define PCIX_OCM_WINDOW		(0x10800)
-#define PCIX_OCM_WINDOW_REG(func)	(PCIX_OCM_WINDOW + 0x20 * (func))
+#define PCIX_OCM_WINDOW_REG(func)	(PCIX_OCM_WINDOW + 0x4 * (func))
 
 #define PCIX_TARGET_STATUS	(0x10118)
 #define PCIX_TARGET_STATUS_F1	(0x10160)
@@ -722,7 +705,7 @@ enum {
 #define QLCNIC_DEV_NPAR_OPER		1 /* NPAR Operational */
 #define QLCNIC_DEV_NPAR_OPER_TIMEO	30 /* Operational time out */
 
-#define QLC_DEV_CHECK_ACTIVE(VAL, FN)		((VAL) &= (1 << (FN * 4)))
+#define QLC_DEV_CHECK_ACTIVE(VAL, FN)		((VAL) & (1 << (FN * 4)))
 #define QLC_DEV_SET_REF_CNT(VAL, FN)		((VAL) |= (1 << (FN * 4)))
 #define QLC_DEV_CLR_REF_CNT(VAL, FN)		((VAL) &= ~(1 << (FN * 4)))
 #define QLC_DEV_SET_RST_RDY(VAL, FN)		((VAL) |= (1 << (FN * 4)))
diff --git a/drivers/net/qlcnic/qlcnic_hw.c b/drivers/net/qlcnic/qlcnic_hw.c
index 7a47a2a7ee2..616940f0a8d 100644
--- a/drivers/net/qlcnic/qlcnic_hw.c
+++ b/drivers/net/qlcnic/qlcnic_hw.c
@@ -1,25 +1,8 @@
 /*
- * Copyright (C) 2009 - QLogic Corporation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called "COPYING".
+ * QLogic qlcnic NIC Driver
+ * Copyright (c)  2009-2010 QLogic Corporation
  *
+ * See LICENSE.qlcnic for copyright and licensing details.
  */
 
 #include "qlcnic.h"
@@ -398,7 +381,7 @@ qlcnic_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
 	return qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 }
 
-static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, u8 *addr)
+static int qlcnic_nic_add_mac(struct qlcnic_adapter *adapter, const u8 *addr)
 {
 	struct list_head *head;
 	struct qlcnic_mac_list_s *cur;
@@ -432,7 +415,9 @@ void qlcnic_set_multi(struct net_device *netdev)
 {
 	struct qlcnic_adapter *adapter = netdev_priv(netdev);
 	struct netdev_hw_addr *ha;
-	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+	static const u8 bcast_addr[ETH_ALEN] = {
+		0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	};
 	u32 mode = VPORT_MISS_MODE_DROP;
 
 	if (!test_bit(__QLCNIC_FW_ATTACHED, &adapter->state))
@@ -638,10 +623,11 @@ int qlcnic_config_rss(struct qlcnic_adapter *adapter, int enable)
 	u64 word;
 	int i, rv;
 
-	const u64 key[] = { 0xbeac01fa6a42b73bULL, 0x8030f20c77cb2da3ULL,
-			0xae7b30b4d0ca2bcbULL, 0x43a38fb04167253dULL,
-			0x255b0ec26d5a56daULL };
-
+	static const u64 key[] = {
+		0xbeac01fa6a42b73bULL, 0x8030f20c77cb2da3ULL,
+		0xae7b30b4d0ca2bcbULL, 0x43a38fb04167253dULL,
+		0x255b0ec26d5a56daULL
+	};
 
 	memset(&req, 0, sizeof(struct qlcnic_nic_req));
 	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
@@ -1234,56 +1220,3 @@ int qlcnic_config_led(struct qlcnic_adapter *adapter, u32 state, u32 rate)
 
 	return rv;
 }
-
-static int qlcnic_set_fw_loopback(struct qlcnic_adapter *adapter, u32 flag)
-{
-	struct qlcnic_nic_req	req;
-	int			rv;
-	u64			word;
-
-	memset(&req, 0, sizeof(struct qlcnic_nic_req));
-	req.qhdr = cpu_to_le64(QLCNIC_HOST_REQUEST << 23);
-
-	word = QLCNIC_H2C_OPCODE_CONFIG_LOOPBACK |
-			((u64)adapter->portnum << 16);
-	req.req_hdr = cpu_to_le64(word);
-	req.words[0] = cpu_to_le64(flag);
-
-	rv = qlcnic_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
-	if (rv)
-		dev_err(&adapter->pdev->dev,
-			"%sting loopback mode failed.\n",
-					flag ? "Set" : "Reset");
-	return rv;
-}
-
-int qlcnic_set_ilb_mode(struct qlcnic_adapter *adapter)
-{
-	if (qlcnic_set_fw_loopback(adapter, 1))
-		return -EIO;
-
-	if (qlcnic_nic_set_promisc(adapter,
-				VPORT_MISS_MODE_ACCEPT_ALL)) {
-		qlcnic_set_fw_loopback(adapter, 0);
-		return -EIO;
-	}
-
-	msleep(1000);
-	return 0;
-}
-
-void qlcnic_clear_ilb_mode(struct qlcnic_adapter *adapter)
-{
-	int mode = VPORT_MISS_MODE_DROP;
-	struct net_device *netdev = adapter->netdev;
-
-	qlcnic_set_fw_loopback(adapter, 0);
-
-	if (netdev->flags & IFF_PROMISC)
-		mode = VPORT_MISS_MODE_ACCEPT_ALL;
-	else if (netdev->flags & IFF_ALLMULTI)
-		mode = VPORT_MISS_MODE_ACCEPT_MULTI;
-
-	qlcnic_nic_set_promisc(adapter, mode);
-	msleep(1000);
-}
diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c
index 0d180c6e41f..9b9c7c39d3e 100644
--- a/drivers/net/qlcnic/qlcnic_init.c
+++ b/drivers/net/qlcnic/qlcnic_init.c
@@ -1,25 +1,8 @@
 /*
- * Copyright (C) 2009 - QLogic Corporation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called "COPYING".
+ * QLogic qlcnic NIC Driver
+ * Copyright (c)  2009-2010 QLogic Corporation
  *
+ * See LICENSE.qlcnic for copyright and licensing details.
  */
 
 #include <linux/netdevice.h>
@@ -236,12 +219,11 @@ int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter)
 	tx_ring->num_desc = adapter->num_txd;
 	tx_ring->txq = netdev_get_tx_queue(netdev, 0);
 
-	cmd_buf_arr = vmalloc(TX_BUFF_RINGSIZE(tx_ring));
+	cmd_buf_arr = vzalloc(TX_BUFF_RINGSIZE(tx_ring));
 	if (cmd_buf_arr == NULL) {
 		dev_err(&netdev->dev, "failed to allocate cmd buffer ring\n");
 		goto err_out;
 	}
-	memset(cmd_buf_arr, 0, TX_BUFF_RINGSIZE(tx_ring));
 	tx_ring->cmd_buf_arr = cmd_buf_arr;
 
 	recv_ctx = &adapter->recv_ctx;
@@ -275,14 +257,12 @@ int qlcnic_alloc_sw_resources(struct qlcnic_adapter *adapter)
 				rds_ring->dma_size + NET_IP_ALIGN;
 			break;
 		}
-		rds_ring->rx_buf_arr = (struct qlcnic_rx_buffer *)
-			vmalloc(RCV_BUFF_RINGSIZE(rds_ring));
+		rds_ring->rx_buf_arr = vzalloc(RCV_BUFF_RINGSIZE(rds_ring));
 		if (rds_ring->rx_buf_arr == NULL) {
 			dev_err(&netdev->dev, "Failed to allocate "
 				"rx buffer ring %d\n", ring);
 			goto err_out;
 		}
-		memset(rds_ring->rx_buf_arr, 0, RCV_BUFF_RINGSIZE(rds_ring));
 		INIT_LIST_HEAD(&rds_ring->free_list);
 		/*
 		 * Now go through all of them, set reference handles
@@ -1693,99 +1673,6 @@ qlcnic_post_rx_buffers_nodb(struct qlcnic_adapter *adapter,
 	spin_unlock(&rds_ring->lock);
 }
 
-static void dump_skb(struct sk_buff *skb)
-{
-	int i;
-	unsigned char *data = skb->data;
-
-	for (i = 0; i < skb->len; i++) {
-		printk("%02x ", data[i]);
-		if ((i & 0x0f) == 8)
-			printk("\n");
-	}
-}
-
-static struct qlcnic_rx_buffer *
-qlcnic_process_rcv_diag(struct qlcnic_adapter *adapter,
-		struct qlcnic_host_sds_ring *sds_ring,
-		int ring, u64 sts_data0)
-{
-	struct qlcnic_recv_context *recv_ctx = &adapter->recv_ctx;
-	struct qlcnic_rx_buffer *buffer;
-	struct sk_buff *skb;
-	struct qlcnic_host_rds_ring *rds_ring;
-	int index, length, cksum, pkt_offset;
-
-	if (unlikely(ring >= adapter->max_rds_rings))
-		return NULL;
-
-	rds_ring = &recv_ctx->rds_rings[ring];
-
-	index = qlcnic_get_sts_refhandle(sts_data0);
-	if (unlikely(index >= rds_ring->num_desc))
-		return NULL;
-
-	buffer = &rds_ring->rx_buf_arr[index];
-
-	length = qlcnic_get_sts_totallength(sts_data0);
-	cksum  = qlcnic_get_sts_status(sts_data0);
-	pkt_offset = qlcnic_get_sts_pkt_offset(sts_data0);
-
-	skb = qlcnic_process_rxbuf(adapter, rds_ring, index, cksum);
-	if (!skb)
-		return buffer;
-
-	if (length > rds_ring->skb_size)
-		skb_put(skb, rds_ring->skb_size);
-	else
-		skb_put(skb, length);
-
-	if (pkt_offset)
-		skb_pull(skb, pkt_offset);
-
-	if (!qlcnic_check_loopback_buff(skb->data))
-		adapter->diag_cnt++;
-	else
-		dump_skb(skb);
-
-	dev_kfree_skb_any(skb);
-	adapter->stats.rx_pkts++;
-	adapter->stats.rxbytes += length;
-
-	return buffer;
-}
-
-void
-qlcnic_process_rcv_ring_diag(struct qlcnic_host_sds_ring *sds_ring)
-{
-	struct qlcnic_adapter *adapter = sds_ring->adapter;
-	struct status_desc *desc;
-	struct qlcnic_rx_buffer *rxbuf;
-	u64 sts_data0;
-
-	int opcode, ring, desc_cnt;
-	u32 consumer = sds_ring->consumer;
-
-	desc = &sds_ring->desc_head[consumer];
-	sts_data0 = le64_to_cpu(desc->status_desc_data[0]);
-
-	if (!(sts_data0 & STATUS_OWNER_HOST))
-		return;
-
-	desc_cnt = qlcnic_get_sts_desc_cnt(sts_data0);
-	opcode = qlcnic_get_sts_opcode(sts_data0);
-
-	ring = qlcnic_get_sts_type(sts_data0);
-	rxbuf = qlcnic_process_rcv_diag(adapter, sds_ring,
-					ring, sts_data0);
-
-	desc->status_desc_data[0] = cpu_to_le64(STATUS_OWNER_PHANTOM);
-	consumer = get_next_index(consumer, sds_ring->num_desc);
-
-	sds_ring->consumer = consumer;
-	writel(consumer, sds_ring->crb_sts_consumer);
-}
-
 void
 qlcnic_fetch_mac(struct qlcnic_adapter *adapter, u32 off1, u32 off2,
 			u8 alt_mac, u8 *mac)
diff --git a/drivers/net/qlcnic/qlcnic_main.c b/drivers/net/qlcnic/qlcnic_main.c
index a3dcd04be22..11e3a46c091 100644
--- a/drivers/net/qlcnic/qlcnic_main.c
+++ b/drivers/net/qlcnic/qlcnic_main.c
@@ -1,25 +1,8 @@
 /*
- * Copyright (C) 2009 - QLogic Corporation.
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
- * MA  02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution
- * in the file called "COPYING".
+ * QLogic qlcnic NIC Driver
+ * Copyright (c)  2009-2010 QLogic Corporation
  *
+ * See LICENSE.qlcnic for copyright and licensing details.
  */
 
 #include <linux/slab.h>
@@ -1546,6 +1529,8 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto err_out_iounmap;
 
+	adapter->flags |= QLCNIC_NEED_FLR;
+
 	err = adapter->nic_ops->start_firmware(adapter);
 	if (err) {
 		dev_err(&pdev->dev, "Loading fw failed.Please Reboot\n");
@@ -2854,61 +2839,6 @@ qlcnic_set_npar_non_operational(struct qlcnic_adapter *adapter)
 	qlcnic_api_unlock(adapter);
 }
 
-/* Caller should held RESETTING bit.
- * This should be call in sync with qlcnic_request_quiscent_mode.
- */
-void qlcnic_clear_quiscent_mode(struct qlcnic_adapter *adapter)
-{
-	qlcnic_clr_drv_state(adapter);
-	qlcnic_api_lock(adapter);
-	QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_READY);
-	qlcnic_api_unlock(adapter);
-}
-
-/* Caller should held RESETTING bit.
- */
-int qlcnic_request_quiscent_mode(struct qlcnic_adapter *adapter)
-{
-	u8 timeo = adapter->dev_init_timeo / 2;
-	u32 state;
-
-	if (qlcnic_api_lock(adapter))
-		return -EIO;
-
-	state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
-	if (state != QLCNIC_DEV_READY)
-		return -EIO;
-
-	QLCWR32(adapter, QLCNIC_CRB_DEV_STATE, QLCNIC_DEV_NEED_QUISCENT);
-	qlcnic_api_unlock(adapter);
-	QLCDB(adapter, DRV, "NEED QUISCENT state set\n");
-	qlcnic_idc_debug_info(adapter, 0);
-
-	qlcnic_set_drv_state(adapter, QLCNIC_DEV_NEED_QUISCENT);
-
-	do {
-		msleep(2000);
-		state = QLCRD32(adapter, QLCNIC_CRB_DEV_STATE);
-		if (state == QLCNIC_DEV_QUISCENT)
-			return 0;
-		if (!qlcnic_check_drv_state(adapter)) {
-			if (qlcnic_api_lock(adapter))
-				return -EIO;
-			QLCWR32(adapter, QLCNIC_CRB_DEV_STATE,
-							QLCNIC_DEV_QUISCENT);
-			qlcnic_api_unlock(adapter);
-			QLCDB(adapter, DRV, "QUISCENT mode set\n");
-			return 0;
-		}
-	} while (--timeo);
-
-	dev_err(&adapter->pdev->dev, "Failed to quiesce device, DRV_STATE=%08x"
-		" DRV_ACTIVE=%08x\n", QLCRD32(adapter, QLCNIC_CRB_DRV_STATE),
-		QLCRD32(adapter, QLCNIC_CRB_DRV_ACTIVE));
-	qlcnic_clear_quiscent_mode(adapter);
-	return -EIO;
-}
-
 /*Transit to RESET state from READY state only */
 static void
 qlcnic_dev_request_reset(struct qlcnic_adapter *adapter)
@@ -3587,9 +3517,12 @@ validate_esw_config(struct qlcnic_adapter *adapter,
 		case QLCNIC_PORT_DEFAULTS:
 			if (QLC_DEV_GET_DRV(op_mode, pci_func) !=
 						QLCNIC_NON_PRIV_FUNC) {
-				esw_cfg[i].mac_anti_spoof = 0;
-				esw_cfg[i].mac_override = 1;
-				esw_cfg[i].promisc_mode = 1;
+				if (esw_cfg[i].mac_anti_spoof != 0)
+					return QL_STATUS_INVALID_PARAM;
+				if (esw_cfg[i].mac_override != 1)
+					return QL_STATUS_INVALID_PARAM;
+				if (esw_cfg[i].promisc_mode != 1)
+					return QL_STATUS_INVALID_PARAM;
 			}
 			break;
 		case QLCNIC_ADD_VLAN:
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index bdb8fe86853..4757c59a07a 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -2083,6 +2083,7 @@ struct ql_adapter {
 	u32 mailbox_in;
 	u32 mailbox_out;
 	struct mbox_params idc_mbc;
+	struct mutex	mpi_mutex;
 
 	int tx_ring_size;
 	int rx_ring_size;
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index c30e0fe55a3..49bfa581306 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -62,15 +62,15 @@ static const u32 default_msg =
 /* NETIF_MSG_PKTDATA | */
     NETIF_MSG_HW | NETIF_MSG_WOL | 0;
 
-static int debug = 0x00007fff;	/* defaults above */
-module_param(debug, int, 0);
+static int debug = -1;	/* defaults above */
+module_param(debug, int, 0664);
 MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
 
 #define MSIX_IRQ 0
 #define MSI_IRQ 1
 #define LEG_IRQ 2
 static int qlge_irq_type = MSIX_IRQ;
-module_param(qlge_irq_type, int, MSIX_IRQ);
+module_param(qlge_irq_type, int, 0664);
 MODULE_PARM_DESC(qlge_irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
 
 static int qlge_mpi_coredump;
@@ -3548,12 +3548,13 @@ err_irq:
 
 static int ql_start_rss(struct ql_adapter *qdev)
 {
-	u8 init_hash_seed[] = {0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2,
-				0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f,
-				0xb0, 0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b,
-				0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80,
-				0x30, 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b,
-				0xbe, 0xac, 0x01, 0xfa};
+	static const u8 init_hash_seed[] = {
+		0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2,
+		0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f, 0xb0,
+		0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b, 0x30, 0xb4,
+		0x77, 0xcb, 0x2d, 0xa3, 0x80, 0x30, 0xf2, 0x0c,
+		0x6a, 0x42, 0xb7, 0x3b, 0xbe, 0xac, 0x01, 0xfa
+	};
 	struct ricb *ricb = &qdev->ricb;
 	int status = 0;
 	int i;
@@ -3844,7 +3845,7 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 
 static void ql_display_dev_info(struct net_device *ndev)
 {
-	struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
+	struct ql_adapter *qdev = netdev_priv(ndev);
 
 	netif_info(qdev, probe, qdev->ndev,
 		   "Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
@@ -4264,7 +4265,7 @@ static struct net_device_stats *qlge_get_stats(struct net_device
 
 static void qlge_set_multicast_list(struct net_device *ndev)
 {
-	struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
+	struct ql_adapter *qdev = netdev_priv(ndev);
 	struct netdev_hw_addr *ha;
 	int i, status;
 
@@ -4354,7 +4355,7 @@ exit:
 
 static int qlge_set_mac_address(struct net_device *ndev, void *p)
 {
-	struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
+	struct ql_adapter *qdev = netdev_priv(ndev);
 	struct sockaddr *addr = p;
 	int status;
 
@@ -4377,7 +4378,7 @@ static int qlge_set_mac_address(struct net_device *ndev, void *p)
 
 static void qlge_tx_timeout(struct net_device *ndev)
 {
-	struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
+	struct ql_adapter *qdev = netdev_priv(ndev);
 	ql_queue_asic_error(qdev);
 }
 
@@ -4629,6 +4630,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work);
 	INIT_DELAYED_WORK(&qdev->mpi_core_to_log, ql_mpi_core_to_log);
 	init_completion(&qdev->ide_completion);
+	mutex_init(&qdev->mpi_mutex);
 
 	if (!cards_found) {
 		dev_info(&pdev->dev, "%s\n", DRV_STRING);
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 100a462cc91..ff2bf8a4e24 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -534,6 +534,7 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	int status;
 	unsigned long count;
 
+	mutex_lock(&qdev->mpi_mutex);
 
 	/* Begin polled mode for MPI */
 	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
@@ -603,6 +604,7 @@ done:
 end:
 	/* End polled mode for MPI */
 	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
+	mutex_unlock(&qdev->mpi_mutex);
 	return status;
 }
 
@@ -1099,9 +1101,7 @@ int ql_wait_fifo_empty(struct ql_adapter *qdev)
 static int ql_set_port_cfg(struct ql_adapter *qdev)
 {
 	int status;
-	rtnl_lock();
 	status = ql_mb_set_port_cfg(qdev);
-	rtnl_unlock();
 	if (status)
 		return status;
 	status = ql_idc_wait(qdev);
@@ -1122,9 +1122,7 @@ void ql_mpi_port_cfg_work(struct work_struct *work)
 	    container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
 	int status;
 
-	rtnl_lock();
 	status = ql_mb_get_port_cfg(qdev);
-	rtnl_unlock();
 	if (status) {
 		netif_err(qdev, drv, qdev->ndev,
 			  "Bug: Failed to get port config data.\n");
@@ -1167,7 +1165,6 @@ void ql_mpi_idc_work(struct work_struct *work)
 	u32 aen;
 	int timeout;
 
-	rtnl_lock();
 	aen = mbcp->mbox_out[1] >> 16;
 	timeout = (mbcp->mbox_out[1] >> 8) & 0xf;
 
@@ -1231,7 +1228,6 @@ void ql_mpi_idc_work(struct work_struct *work)
 		}
 		break;
 	}
-	rtnl_unlock();
 }
 
 void ql_mpi_work(struct work_struct *work)
@@ -1242,7 +1238,7 @@ void ql_mpi_work(struct work_struct *work)
 	struct mbox_params *mbcp = &mbc;
 	int err = 0;
 
-	rtnl_lock();
+	mutex_lock(&qdev->mpi_mutex);
 	/* Begin polled mode for MPI */
 	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
 
@@ -1259,7 +1255,7 @@ void ql_mpi_work(struct work_struct *work)
 
 	/* End polled mode for MPI */
 	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
-	rtnl_unlock();
+	mutex_unlock(&qdev->mpi_mutex);
 	ql_enable_completion_interrupt(qdev, 0);
 }
 
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 0b014c89468..27e6f6d43ca 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -1153,6 +1153,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 	lp->mii_bus = mdiobus_alloc();
 	if (!lp->mii_bus) {
 		dev_err(&pdev->dev, "mdiobus_alloc() failed\n");
+		err = -ENOMEM;
 		goto err_out_unmap;
 	}
 
@@ -1165,6 +1166,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 	lp->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
 	if (!lp->mii_bus->irq) {
 		dev_err(&pdev->dev, "mii_bus irq allocation failed\n");
+		err = -ENOMEM;
 		goto err_out_mdio;
 	}
 
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index d88ce9fb1cb..27a7c20f64c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
 #include <linux/pm_runtime.h>
+#include <linux/firmware.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
@@ -33,6 +34,9 @@
 #define MODULENAME "r8169"
 #define PFX MODULENAME ": "
 
+#define FIRMWARE_8168D_1	"rtl_nic/rtl8168d-1.fw"
+#define FIRMWARE_8168D_2	"rtl_nic/rtl8168d-2.fw"
+
 #ifdef RTL8169_DEBUG
 #define assert(expr) \
 	if (!(expr)) {					\
@@ -63,7 +67,6 @@ static const int multicast_filter_limit = 32;
 #define RX_FIFO_THRESH	7	/* 7 means NO threshold, Rx buffer level before first PCI xfer. */
 #define RX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
 #define TX_DMA_BURST	6	/* Maximum PCI burst, '6' is 1024 */
-#define EarlyTxThld	0x3F	/* 0x3F means NO early transmit */
 #define SafeMtu		0x1c20	/* ... actually life sucks beyond ~7k */
 #define InterFrameGap	0x03	/* 3 means InterFrameGap = the shortest one */
 
@@ -118,7 +121,8 @@ enum mac_version {
 	RTL_GIGA_MAC_VER_24 = 0x18, // 8168CP
 	RTL_GIGA_MAC_VER_25 = 0x19, // 8168D
 	RTL_GIGA_MAC_VER_26 = 0x1a, // 8168D
-	RTL_GIGA_MAC_VER_27 = 0x1b  // 8168DP
+	RTL_GIGA_MAC_VER_27 = 0x1b, // 8168DP
+	RTL_GIGA_MAC_VER_28 = 0x1c, // 8168DP
 };
 
 #define _R(NAME,MAC,MASK) \
@@ -155,7 +159,8 @@ static const struct {
 	_R("RTL8168cp/8111cp",	RTL_GIGA_MAC_VER_24, 0xff7e1880), // PCI-E
 	_R("RTL8168d/8111d",	RTL_GIGA_MAC_VER_25, 0xff7e1880), // PCI-E
 	_R("RTL8168d/8111d",	RTL_GIGA_MAC_VER_26, 0xff7e1880), // PCI-E
-	_R("RTL8168dp/8111dp",	RTL_GIGA_MAC_VER_27, 0xff7e1880)  // PCI-E
+	_R("RTL8168dp/8111dp",	RTL_GIGA_MAC_VER_27, 0xff7e1880), // PCI-E
+	_R("RTL8168dp/8111dp",	RTL_GIGA_MAC_VER_28, 0xff7e1880)  // PCI-E
 };
 #undef _R
 
@@ -227,7 +232,14 @@ enum rtl_registers {
 	IntrMitigate	= 0xe2,
 	RxDescAddrLow	= 0xe4,
 	RxDescAddrHigh	= 0xe8,
-	EarlyTxThres	= 0xec,
+	EarlyTxThres	= 0xec,	/* 8169. Unit of 32 bytes. */
+
+#define NoEarlyTx	0x3f	/* Max value : no early transmit. */
+
+	MaxTxPacketSize	= 0xec,	/* 8101/8168. Unit of 128 bytes. */
+
+#define TxPacketMax	(8064 >> 7)
+
 	FuncEvent	= 0xf0,
 	FuncEventMask	= 0xf4,
 	FuncPresetState	= 0xf8,
@@ -248,7 +260,7 @@ enum rtl8168_8101_registers {
 #define	CSIAR_BYTE_ENABLE		0x0f
 #define	CSIAR_BYTE_ENABLE_SHIFT		12
 #define	CSIAR_ADDR_MASK			0x0fff
-
+	PMCH			= 0x6f,
 	EPHYAR			= 0x80,
 #define	EPHYAR_FLAG			0x80000000
 #define	EPHYAR_WRITE_CMD		0x80000000
@@ -267,6 +279,33 @@ enum rtl8168_8101_registers {
 #define	EFUSEAR_DATA_MASK		0xff
 };
 
+enum rtl8168_registers {
+	ERIDR			= 0x70,
+	ERIAR			= 0x74,
+#define ERIAR_FLAG			0x80000000
+#define ERIAR_WRITE_CMD			0x80000000
+#define ERIAR_READ_CMD			0x00000000
+#define ERIAR_ADDR_BYTE_ALIGN		4
+#define ERIAR_EXGMAC			0
+#define ERIAR_MSIX			1
+#define ERIAR_ASF			2
+#define ERIAR_TYPE_SHIFT		16
+#define ERIAR_BYTEEN			0x0f
+#define ERIAR_BYTEEN_SHIFT		12
+	EPHY_RXER_NUM		= 0x7c,
+	OCPDR			= 0xb0,	/* OCP GPHY access */
+#define OCPDR_WRITE_CMD			0x80000000
+#define OCPDR_READ_CMD			0x00000000
+#define OCPDR_REG_MASK			0x7f
+#define OCPDR_GPHY_REG_SHIFT		16
+#define OCPDR_DATA_MASK			0xffff
+	OCPAR			= 0xb4,
+#define OCPAR_FLAG			0x80000000
+#define OCPAR_GPHY_WRITE_CMD		0x8000f060
+#define OCPAR_GPHY_READ_CMD		0x0000f060
+	RDSAR1			= 0xd0	/* 8168c only. Undocumented on 8168dp */
+};
+
 enum rtl_register_content {
 	/* InterruptStatusBits */
 	SYSErr		= 0x8000,
@@ -490,11 +529,22 @@ struct rtl8169_private {
 #ifdef CONFIG_R8169_VLAN
 	struct vlan_group *vlgrp;
 #endif
+
+	struct mdio_ops {
+		void (*write)(void __iomem *, int, int);
+		int (*read)(void __iomem *, int);
+	} mdio_ops;
+
+	struct pll_power_ops {
+		void (*down)(struct rtl8169_private *);
+		void (*up)(struct rtl8169_private *);
+	} pll_power_ops;
+
 	int (*set_speed)(struct net_device *, u8 autoneg, u16 speed, u8 duplex);
 	int (*get_settings)(struct net_device *, struct ethtool_cmd *);
-	void (*phy_reset_enable)(void __iomem *);
+	void (*phy_reset_enable)(struct rtl8169_private *tp);
 	void (*hw_start)(struct net_device *);
-	unsigned int (*phy_reset_pending)(void __iomem *);
+	unsigned int (*phy_reset_pending)(struct rtl8169_private *tp);
 	unsigned int (*link_ok)(void __iomem *);
 	int (*do_ioctl)(struct rtl8169_private *tp, struct mii_ioctl_data *data, int cmd);
 	int pcie_cap;
@@ -514,6 +564,8 @@ module_param_named(debug, debug.msg_enable, int, 0);
 MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(RTL8169_VERSION);
+MODULE_FIRMWARE(FIRMWARE_8168D_1);
+MODULE_FIRMWARE(FIRMWARE_8168D_2);
 
 static int rtl8169_open(struct net_device *dev);
 static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
@@ -535,7 +587,82 @@ static int rtl8169_poll(struct napi_struct *napi, int budget);
 static const unsigned int rtl8169_rx_config =
 	(RX_FIFO_THRESH << RxCfgFIFOShift) | (RX_DMA_BURST << RxCfgDMAShift);
 
-static void mdio_write(void __iomem *ioaddr, int reg_addr, int value)
+static u32 ocp_read(struct rtl8169_private *tp, u8 mask, u16 reg)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+	int i;
+
+	RTL_W32(OCPAR, ((u32)mask & 0x0f) << 12 | (reg & 0x0fff));
+	for (i = 0; i < 20; i++) {
+		udelay(100);
+		if (RTL_R32(OCPAR) & OCPAR_FLAG)
+			break;
+	}
+	return RTL_R32(OCPDR);
+}
+
+static void ocp_write(struct rtl8169_private *tp, u8 mask, u16 reg, u32 data)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+	int i;
+
+	RTL_W32(OCPDR, data);
+	RTL_W32(OCPAR, OCPAR_FLAG | ((u32)mask & 0x0f) << 12 | (reg & 0x0fff));
+	for (i = 0; i < 20; i++) {
+		udelay(100);
+		if ((RTL_R32(OCPAR) & OCPAR_FLAG) == 0)
+			break;
+	}
+}
+
+static void rtl8168_oob_notify(void __iomem *ioaddr, u8 cmd)
+{
+	int i;
+
+	RTL_W8(ERIDR, cmd);
+	RTL_W32(ERIAR, 0x800010e8);
+	msleep(2);
+	for (i = 0; i < 5; i++) {
+		udelay(100);
+		if (!(RTL_R32(ERIDR) & ERIAR_FLAG))
+			break;
+	}
+
+	ocp_write(ioaddr, 0x1, 0x30, 0x00000001);
+}
+
+#define OOB_CMD_RESET		0x00
+#define OOB_CMD_DRIVER_START	0x05
+#define OOB_CMD_DRIVER_STOP	0x06
+
+static void rtl8168_driver_start(struct rtl8169_private *tp)
+{
+	int i;
+
+	rtl8168_oob_notify(tp, OOB_CMD_DRIVER_START);
+
+	for (i = 0; i < 10; i++) {
+		msleep(10);
+		if (ocp_read(tp, 0x0f, 0x0010) & 0x00000800)
+			break;
+	}
+}
+
+static void rtl8168_driver_stop(struct rtl8169_private *tp)
+{
+	int i;
+
+	rtl8168_oob_notify(tp, OOB_CMD_DRIVER_STOP);
+
+	for (i = 0; i < 10; i++) {
+		msleep(10);
+		if ((ocp_read(tp, 0x0f, 0x0010) & 0x00000800) == 0)
+			break;
+	}
+}
+
+
+static void r8169_mdio_write(void __iomem *ioaddr, int reg_addr, int value)
 {
 	int i;
 
@@ -557,7 +684,7 @@ static void mdio_write(void __iomem *ioaddr, int reg_addr, int value)
 	udelay(20);
 }
 
-static int mdio_read(void __iomem *ioaddr, int reg_addr)
+static int r8169_mdio_read(void __iomem *ioaddr, int reg_addr)
 {
 	int i, value = -1;
 
@@ -583,34 +710,117 @@ static int mdio_read(void __iomem *ioaddr, int reg_addr)
 	return value;
 }
 
-static void mdio_patch(void __iomem *ioaddr, int reg_addr, int value)
+static void r8168dp_1_mdio_access(void __iomem *ioaddr, int reg_addr, u32 data)
+{
+	int i;
+
+	RTL_W32(OCPDR, data |
+		((reg_addr & OCPDR_REG_MASK) << OCPDR_GPHY_REG_SHIFT));
+	RTL_W32(OCPAR, OCPAR_GPHY_WRITE_CMD);
+	RTL_W32(EPHY_RXER_NUM, 0);
+
+	for (i = 0; i < 100; i++) {
+		mdelay(1);
+		if (!(RTL_R32(OCPAR) & OCPAR_FLAG))
+			break;
+	}
+}
+
+static void r8168dp_1_mdio_write(void __iomem *ioaddr, int reg_addr, int value)
+{
+	r8168dp_1_mdio_access(ioaddr, reg_addr, OCPDR_WRITE_CMD |
+		(value & OCPDR_DATA_MASK));
+}
+
+static int r8168dp_1_mdio_read(void __iomem *ioaddr, int reg_addr)
+{
+	int i;
+
+	r8168dp_1_mdio_access(ioaddr, reg_addr, OCPDR_READ_CMD);
+
+	mdelay(1);
+	RTL_W32(OCPAR, OCPAR_GPHY_READ_CMD);
+	RTL_W32(EPHY_RXER_NUM, 0);
+
+	for (i = 0; i < 100; i++) {
+		mdelay(1);
+		if (RTL_R32(OCPAR) & OCPAR_FLAG)
+			break;
+	}
+
+	return RTL_R32(OCPDR) & OCPDR_DATA_MASK;
+}
+
+#define R8168DP_1_MDIO_ACCESS_BIT	0x00020000
+
+static void r8168dp_2_mdio_start(void __iomem *ioaddr)
+{
+	RTL_W32(0xd0, RTL_R32(0xd0) & ~R8168DP_1_MDIO_ACCESS_BIT);
+}
+
+static void r8168dp_2_mdio_stop(void __iomem *ioaddr)
+{
+	RTL_W32(0xd0, RTL_R32(0xd0) | R8168DP_1_MDIO_ACCESS_BIT);
+}
+
+static void r8168dp_2_mdio_write(void __iomem *ioaddr, int reg_addr, int value)
+{
+	r8168dp_2_mdio_start(ioaddr);
+
+	r8169_mdio_write(ioaddr, reg_addr, value);
+
+	r8168dp_2_mdio_stop(ioaddr);
+}
+
+static int r8168dp_2_mdio_read(void __iomem *ioaddr, int reg_addr)
+{
+	int value;
+
+	r8168dp_2_mdio_start(ioaddr);
+
+	value = r8169_mdio_read(ioaddr, reg_addr);
+
+	r8168dp_2_mdio_stop(ioaddr);
+
+	return value;
+}
+
+static void rtl_writephy(struct rtl8169_private *tp, int location, u32 val)
+{
+	tp->mdio_ops.write(tp->mmio_addr, location, val);
+}
+
+static int rtl_readphy(struct rtl8169_private *tp, int location)
 {
-	mdio_write(ioaddr, reg_addr, mdio_read(ioaddr, reg_addr) | value);
+	return tp->mdio_ops.read(tp->mmio_addr, location);
 }
 
-static void mdio_plus_minus(void __iomem *ioaddr, int reg_addr, int p, int m)
+static void rtl_patchphy(struct rtl8169_private *tp, int reg_addr, int value)
+{
+	rtl_writephy(tp, reg_addr, rtl_readphy(tp, reg_addr) | value);
+}
+
+static void rtl_w1w0_phy(struct rtl8169_private *tp, int reg_addr, int p, int m)
 {
 	int val;
 
-	val = mdio_read(ioaddr, reg_addr);
-	mdio_write(ioaddr, reg_addr, (val | p) & ~m);
+	val = rtl_readphy(tp, reg_addr);
+	rtl_writephy(tp, reg_addr, (val | p) & ~m);
 }
 
 static void rtl_mdio_write(struct net_device *dev, int phy_id, int location,
 			   int val)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->mmio_addr;
 
-	mdio_write(ioaddr, location, val);
+	rtl_writephy(tp, location, val);
 }
 
 static int rtl_mdio_read(struct net_device *dev, int phy_id, int location)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->mmio_addr;
 
-	return mdio_read(ioaddr, location);
+	return rtl_readphy(tp, location);
 }
 
 static void rtl_ephy_write(void __iomem *ioaddr, int reg_addr, int value)
@@ -711,14 +921,16 @@ static void rtl8169_asic_down(void __iomem *ioaddr)
 	RTL_R16(CPlusCmd);
 }
 
-static unsigned int rtl8169_tbi_reset_pending(void __iomem *ioaddr)
+static unsigned int rtl8169_tbi_reset_pending(struct rtl8169_private *tp)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
+
 	return RTL_R32(TBICSR) & TBIReset;
 }
 
-static unsigned int rtl8169_xmii_reset_pending(void __iomem *ioaddr)
+static unsigned int rtl8169_xmii_reset_pending(struct rtl8169_private *tp)
 {
-	return mdio_read(ioaddr, MII_BMCR) & BMCR_RESET;
+	return rtl_readphy(tp, MII_BMCR) & BMCR_RESET;
 }
 
 static unsigned int rtl8169_tbi_link_ok(void __iomem *ioaddr)
@@ -731,39 +943,51 @@ static unsigned int rtl8169_xmii_link_ok(void __iomem *ioaddr)
 	return RTL_R8(PHYstatus) & LinkStatus;
 }
 
-static void rtl8169_tbi_reset_enable(void __iomem *ioaddr)
+static void rtl8169_tbi_reset_enable(struct rtl8169_private *tp)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
+
 	RTL_W32(TBICSR, RTL_R32(TBICSR) | TBIReset);
 }
 
-static void rtl8169_xmii_reset_enable(void __iomem *ioaddr)
+static void rtl8169_xmii_reset_enable(struct rtl8169_private *tp)
 {
 	unsigned int val;
 
-	val = mdio_read(ioaddr, MII_BMCR) | BMCR_RESET;
-	mdio_write(ioaddr, MII_BMCR, val & 0xffff);
+	val = rtl_readphy(tp, MII_BMCR) | BMCR_RESET;
+	rtl_writephy(tp, MII_BMCR, val & 0xffff);
 }
 
-static void rtl8169_check_link_status(struct net_device *dev,
+static void __rtl8169_check_link_status(struct net_device *dev,
 				      struct rtl8169_private *tp,
-				      void __iomem *ioaddr)
+				      void __iomem *ioaddr,
+				      bool pm)
 {
 	unsigned long flags;
 
 	spin_lock_irqsave(&tp->lock, flags);
 	if (tp->link_ok(ioaddr)) {
 		/* This is to cancel a scheduled suspend if there's one. */
-		pm_request_resume(&tp->pci_dev->dev);
+		if (pm)
+			pm_request_resume(&tp->pci_dev->dev);
 		netif_carrier_on(dev);
 		netif_info(tp, ifup, dev, "link up\n");
 	} else {
 		netif_carrier_off(dev);
 		netif_info(tp, ifdown, dev, "link down\n");
-		pm_schedule_suspend(&tp->pci_dev->dev, 100);
+		if (pm)
+			pm_schedule_suspend(&tp->pci_dev->dev, 100);
 	}
 	spin_unlock_irqrestore(&tp->lock, flags);
 }
 
+static void rtl8169_check_link_status(struct net_device *dev,
+				      struct rtl8169_private *tp,
+				      void __iomem *ioaddr)
+{
+	__rtl8169_check_link_status(dev, tp, ioaddr, false);
+}
+
 #define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
 
 static u32 __rtl8169_get_wol(struct rtl8169_private *tp)
@@ -846,10 +1070,10 @@ static int rtl8169_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 	else
 		tp->features &= ~RTL_FEATURE_WOL;
 	__rtl8169_set_wol(tp, wol->wolopts);
-	device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts);
-
 	spin_unlock_irq(&tp->lock);
 
+	device_set_wakeup_enable(&tp->pci_dev->dev, wol->wolopts);
+
 	return 0;
 }
 
@@ -895,18 +1119,17 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
 				  u8 autoneg, u16 speed, u8 duplex)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->mmio_addr;
 	int giga_ctrl, bmcr;
 
 	if (autoneg == AUTONEG_ENABLE) {
 		int auto_nego;
 
-		auto_nego = mdio_read(ioaddr, MII_ADVERTISE);
+		auto_nego = rtl_readphy(tp, MII_ADVERTISE);
 		auto_nego |= (ADVERTISE_10HALF | ADVERTISE_10FULL |
 			      ADVERTISE_100HALF | ADVERTISE_100FULL);
 		auto_nego |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
 
-		giga_ctrl = mdio_read(ioaddr, MII_CTRL1000);
+		giga_ctrl = rtl_readphy(tp, MII_CTRL1000);
 		giga_ctrl &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 
 		/* The 8100e/8101e/8102e do Fast Ethernet only. */
@@ -934,12 +1157,12 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
 			 * Vendor specific (0x1f) and reserved (0x0e) MII
 			 * registers.
 			 */
-			mdio_write(ioaddr, 0x1f, 0x0000);
-			mdio_write(ioaddr, 0x0e, 0x0000);
+			rtl_writephy(tp, 0x1f, 0x0000);
+			rtl_writephy(tp, 0x0e, 0x0000);
 		}
 
-		mdio_write(ioaddr, MII_ADVERTISE, auto_nego);
-		mdio_write(ioaddr, MII_CTRL1000, giga_ctrl);
+		rtl_writephy(tp, MII_ADVERTISE, auto_nego);
+		rtl_writephy(tp, MII_CTRL1000, giga_ctrl);
 	} else {
 		giga_ctrl = 0;
 
@@ -953,21 +1176,21 @@ static int rtl8169_set_speed_xmii(struct net_device *dev,
 		if (duplex == DUPLEX_FULL)
 			bmcr |= BMCR_FULLDPLX;
 
-		mdio_write(ioaddr, 0x1f, 0x0000);
+		rtl_writephy(tp, 0x1f, 0x0000);
 	}
 
 	tp->phy_1000_ctrl_reg = giga_ctrl;
 
-	mdio_write(ioaddr, MII_BMCR, bmcr);
+	rtl_writephy(tp, MII_BMCR, bmcr);
 
 	if ((tp->mac_version == RTL_GIGA_MAC_VER_02) ||
 	    (tp->mac_version == RTL_GIGA_MAC_VER_03)) {
 		if ((speed == SPEED_100) && (autoneg != AUTONEG_ENABLE)) {
-			mdio_write(ioaddr, 0x17, 0x2138);
-			mdio_write(ioaddr, 0x0e, 0x0260);
+			rtl_writephy(tp, 0x17, 0x2138);
+			rtl_writephy(tp, 0x0e, 0x0260);
 		} else {
-			mdio_write(ioaddr, 0x17, 0x2108);
-			mdio_write(ioaddr, 0x0e, 0x0000);
+			rtl_writephy(tp, 0x17, 0x2108);
+			rtl_writephy(tp, 0x0e, 0x0000);
 		}
 	}
 
@@ -1309,9 +1532,12 @@ static void rtl8169_get_mac_version(struct rtl8169_private *tp,
 		/* 8168D family. */
 		{ 0x7cf00000, 0x28300000,	RTL_GIGA_MAC_VER_26 },
 		{ 0x7cf00000, 0x28100000,	RTL_GIGA_MAC_VER_25 },
-		{ 0x7c800000, 0x28800000,	RTL_GIGA_MAC_VER_27 },
 		{ 0x7c800000, 0x28000000,	RTL_GIGA_MAC_VER_26 },
 
+		/* 8168DP family. */
+		{ 0x7cf00000, 0x28800000,	RTL_GIGA_MAC_VER_27 },
+		{ 0x7cf00000, 0x28a00000,	RTL_GIGA_MAC_VER_28 },
+
 		/* 8168C family. */
 		{ 0x7cf00000, 0x3cb00000,	RTL_GIGA_MAC_VER_24 },
 		{ 0x7cf00000, 0x3c900000,	RTL_GIGA_MAC_VER_23 },
@@ -1375,15 +1601,74 @@ struct phy_reg {
 	u16 val;
 };
 
-static void rtl_phy_write(void __iomem *ioaddr, const struct phy_reg *regs, int len)
+static void rtl_writephy_batch(struct rtl8169_private *tp,
+			       const struct phy_reg *regs, int len)
 {
 	while (len-- > 0) {
-		mdio_write(ioaddr, regs->reg, regs->val);
+		rtl_writephy(tp, regs->reg, regs->val);
 		regs++;
 	}
 }
 
-static void rtl8169s_hw_phy_config(void __iomem *ioaddr)
+#define PHY_READ		0x00000000
+#define PHY_DATA_OR		0x10000000
+#define PHY_DATA_AND		0x20000000
+#define PHY_BJMPN		0x30000000
+#define PHY_READ_EFUSE		0x40000000
+#define PHY_READ_MAC_BYTE	0x50000000
+#define PHY_WRITE_MAC_BYTE	0x60000000
+#define PHY_CLEAR_READCOUNT	0x70000000
+#define PHY_WRITE		0x80000000
+#define PHY_READCOUNT_EQ_SKIP	0x90000000
+#define PHY_COMP_EQ_SKIPN	0xa0000000
+#define PHY_COMP_NEQ_SKIPN	0xb0000000
+#define PHY_WRITE_PREVIOUS	0xc0000000
+#define PHY_SKIPN		0xd0000000
+#define PHY_DELAY_MS		0xe0000000
+#define PHY_WRITE_ERI_WORD	0xf0000000
+
+static void
+rtl_phy_write_fw(struct rtl8169_private *tp, const struct firmware *fw)
+{
+	__le32 *phytable = (__le32 *)fw->data;
+	struct net_device *dev = tp->dev;
+	size_t i;
+
+	if (fw->size % sizeof(*phytable)) {
+		netif_err(tp, probe, dev, "odd sized firmware %zd\n", fw->size);
+		return;
+	}
+
+	for (i = 0; i < fw->size / sizeof(*phytable); i++) {
+		u32 action = le32_to_cpu(phytable[i]);
+
+		if (!action)
+			break;
+
+		if ((action & 0xf0000000) != PHY_WRITE) {
+			netif_err(tp, probe, dev,
+				  "unknown action 0x%08x\n", action);
+			return;
+		}
+	}
+
+	while (i-- != 0) {
+		u32 action = le32_to_cpu(*phytable);
+		u32 data = action & 0x0000ffff;
+		u32 reg = (action & 0x0fff0000) >> 16;
+
+		switch(action & 0xf0000000) {
+		case PHY_WRITE:
+			rtl_writephy(tp, reg, data);
+			phytable++;
+			break;
+		default:
+			BUG();
+		}
+	}
+}
+
+static void rtl8169s_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
@@ -1447,10 +1732,10 @@ static void rtl8169s_hw_phy_config(void __iomem *ioaddr)
 		{ 0x00, 0x9200 }
 	};
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
 
-static void rtl8169sb_hw_phy_config(void __iomem *ioaddr)
+static void rtl8169sb_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0002 },
@@ -1458,11 +1743,10 @@ static void rtl8169sb_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1f, 0x0000 }
 	};
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
 
-static void rtl8169scd_hw_phy_config_quirk(struct rtl8169_private *tp,
-					   void __iomem *ioaddr)
+static void rtl8169scd_hw_phy_config_quirk(struct rtl8169_private *tp)
 {
 	struct pci_dev *pdev = tp->pci_dev;
 	u16 vendor_id, device_id;
@@ -1473,13 +1757,12 @@ static void rtl8169scd_hw_phy_config_quirk(struct rtl8169_private *tp,
 	if ((vendor_id != PCI_VENDOR_ID_GIGABYTE) || (device_id != 0xe000))
 		return;
 
-	mdio_write(ioaddr, 0x1f, 0x0001);
-	mdio_write(ioaddr, 0x10, 0xf01b);
-	mdio_write(ioaddr, 0x1f, 0x0000);
+	rtl_writephy(tp, 0x1f, 0x0001);
+	rtl_writephy(tp, 0x10, 0xf01b);
+	rtl_writephy(tp, 0x1f, 0x0000);
 }
 
-static void rtl8169scd_hw_phy_config(struct rtl8169_private *tp,
-				     void __iomem *ioaddr)
+static void rtl8169scd_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
@@ -1521,12 +1804,12 @@ static void rtl8169scd_hw_phy_config(struct rtl8169_private *tp,
 		{ 0x1f, 0x0000 }
 	};
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 
-	rtl8169scd_hw_phy_config_quirk(tp, ioaddr);
+	rtl8169scd_hw_phy_config_quirk(tp);
 }
 
-static void rtl8169sce_hw_phy_config(void __iomem *ioaddr)
+static void rtl8169sce_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
@@ -1576,23 +1859,23 @@ static void rtl8169sce_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1f, 0x0000 }
 	};
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
 
-static void rtl8168bb_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168bb_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x10, 0xf41b },
 		{ 0x1f, 0x0000 }
 	};
 
-	mdio_write(ioaddr, 0x1f, 0x0001);
-	mdio_patch(ioaddr, 0x16, 1 << 0);
+	rtl_writephy(tp, 0x1f, 0x0001);
+	rtl_patchphy(tp, 0x16, 1 << 0);
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
 
-static void rtl8168bef_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168bef_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
@@ -1600,10 +1883,10 @@ static void rtl8168bef_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1f, 0x0000 }
 	};
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
 
-static void rtl8168cp_1_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168cp_1_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0000 },
@@ -1613,10 +1896,10 @@ static void rtl8168cp_1_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1f, 0x0000 }
 	};
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
 
-static void rtl8168cp_2_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168cp_2_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
@@ -1624,14 +1907,14 @@ static void rtl8168cp_2_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1f, 0x0000 }
 	};
 
-	mdio_write(ioaddr, 0x1f, 0x0000);
-	mdio_patch(ioaddr, 0x14, 1 << 5);
-	mdio_patch(ioaddr, 0x0d, 1 << 5);
+	rtl_writephy(tp, 0x1f, 0x0000);
+	rtl_patchphy(tp, 0x14, 1 << 5);
+	rtl_patchphy(tp, 0x0d, 1 << 5);
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
 
-static void rtl8168c_1_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168c_1_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
@@ -1653,14 +1936,14 @@ static void rtl8168c_1_hw_phy_config(void __iomem *ioaddr)
 		{ 0x09, 0x0000 }
 	};
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 
-	mdio_patch(ioaddr, 0x14, 1 << 5);
-	mdio_patch(ioaddr, 0x0d, 1 << 5);
-	mdio_write(ioaddr, 0x1f, 0x0000);
+	rtl_patchphy(tp, 0x14, 1 << 5);
+	rtl_patchphy(tp, 0x0d, 1 << 5);
+	rtl_writephy(tp, 0x1f, 0x0000);
 }
 
-static void rtl8168c_2_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168c_2_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
@@ -1680,15 +1963,15 @@ static void rtl8168c_2_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1f, 0x0000 }
 	};
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 
-	mdio_patch(ioaddr, 0x16, 1 << 0);
-	mdio_patch(ioaddr, 0x14, 1 << 5);
-	mdio_patch(ioaddr, 0x0d, 1 << 5);
-	mdio_write(ioaddr, 0x1f, 0x0000);
+	rtl_patchphy(tp, 0x16, 1 << 0);
+	rtl_patchphy(tp, 0x14, 1 << 5);
+	rtl_patchphy(tp, 0x0d, 1 << 5);
+	rtl_writephy(tp, 0x1f, 0x0000);
 }
 
-static void rtl8168c_3_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168c_3_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0001 },
@@ -1702,22 +1985,23 @@ static void rtl8168c_3_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1f, 0x0000 }
 	};
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 
-	mdio_patch(ioaddr, 0x16, 1 << 0);
-	mdio_patch(ioaddr, 0x14, 1 << 5);
-	mdio_patch(ioaddr, 0x0d, 1 << 5);
-	mdio_write(ioaddr, 0x1f, 0x0000);
+	rtl_patchphy(tp, 0x16, 1 << 0);
+	rtl_patchphy(tp, 0x14, 1 << 5);
+	rtl_patchphy(tp, 0x0d, 1 << 5);
+	rtl_writephy(tp, 0x1f, 0x0000);
 }
 
-static void rtl8168c_4_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168c_4_hw_phy_config(struct rtl8169_private *tp)
 {
-	rtl8168c_3_hw_phy_config(ioaddr);
+	rtl8168c_3_hw_phy_config(tp);
 }
 
-static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168d_1_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init_0[] = {
+		/* Channel Estimation */
 		{ 0x1f, 0x0001 },
 		{ 0x06, 0x4064 },
 		{ 0x07, 0x2863 },
@@ -1734,378 +2018,40 @@ static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr)
 		{ 0x12, 0xf49f },
 		{ 0x13, 0x070b },
 		{ 0x1a, 0x05ad },
-		{ 0x14, 0x94c0 }
-	};
-	static const struct phy_reg phy_reg_init_1[] = {
+		{ 0x14, 0x94c0 },
+
+		/*
+		 * Tx Error Issue
+		 * enhance line driver power
+		 */
 		{ 0x1f, 0x0002 },
 		{ 0x06, 0x5561 },
 		{ 0x1f, 0x0005 },
 		{ 0x05, 0x8332 },
-		{ 0x06, 0x5561 }
-	};
-	static const struct phy_reg phy_reg_init_2[] = {
-		{ 0x1f, 0x0005 },
-		{ 0x05, 0xffc2 },
-		{ 0x1f, 0x0005 },
-		{ 0x05, 0x8000 },
-		{ 0x06, 0xf8f9 },
-		{ 0x06, 0xfaef },
-		{ 0x06, 0x59ee },
-		{ 0x06, 0xf8ea },
-		{ 0x06, 0x00ee },
-		{ 0x06, 0xf8eb },
-		{ 0x06, 0x00e0 },
-		{ 0x06, 0xf87c },
-		{ 0x06, 0xe1f8 },
-		{ 0x06, 0x7d59 },
-		{ 0x06, 0x0fef },
-		{ 0x06, 0x0139 },
-		{ 0x06, 0x029e },
-		{ 0x06, 0x06ef },
-		{ 0x06, 0x1039 },
-		{ 0x06, 0x089f },
-		{ 0x06, 0x2aee },
-		{ 0x06, 0xf8ea },
-		{ 0x06, 0x00ee },
-		{ 0x06, 0xf8eb },
-		{ 0x06, 0x01e0 },
-		{ 0x06, 0xf87c },
-		{ 0x06, 0xe1f8 },
-		{ 0x06, 0x7d58 },
-		{ 0x06, 0x409e },
-		{ 0x06, 0x0f39 },
-		{ 0x06, 0x46aa },
-		{ 0x06, 0x0bbf },
-		{ 0x06, 0x8290 },
-		{ 0x06, 0xd682 },
-		{ 0x06, 0x9802 },
-		{ 0x06, 0x014f },
-		{ 0x06, 0xae09 },
-		{ 0x06, 0xbf82 },
-		{ 0x06, 0x98d6 },
-		{ 0x06, 0x82a0 },
-		{ 0x06, 0x0201 },
-		{ 0x06, 0x4fef },
-		{ 0x06, 0x95fe },
-		{ 0x06, 0xfdfc },
-		{ 0x06, 0x05f8 },
-		{ 0x06, 0xf9fa },
-		{ 0x06, 0xeef8 },
-		{ 0x06, 0xea00 },
-		{ 0x06, 0xeef8 },
-		{ 0x06, 0xeb00 },
-		{ 0x06, 0xe2f8 },
-		{ 0x06, 0x7ce3 },
-		{ 0x06, 0xf87d },
-		{ 0x06, 0xa511 },
-		{ 0x06, 0x1112 },
-		{ 0x06, 0xd240 },
-		{ 0x06, 0xd644 },
-		{ 0x06, 0x4402 },
-		{ 0x06, 0x8217 },
-		{ 0x06, 0xd2a0 },
-		{ 0x06, 0xd6aa },
-		{ 0x06, 0xaa02 },
-		{ 0x06, 0x8217 },
-		{ 0x06, 0xae0f },
-		{ 0x06, 0xa544 },
-		{ 0x06, 0x4402 },
-		{ 0x06, 0xae4d },
-		{ 0x06, 0xa5aa },
-		{ 0x06, 0xaa02 },
-		{ 0x06, 0xae47 },
-		{ 0x06, 0xaf82 },
-		{ 0x06, 0x13ee },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x00ee },
-		{ 0x06, 0x834d },
-		{ 0x06, 0x0fee },
-		{ 0x06, 0x834c },
-		{ 0x06, 0x0fee },
-		{ 0x06, 0x834f },
-		{ 0x06, 0x00ee },
-		{ 0x06, 0x8351 },
-		{ 0x06, 0x00ee },
-		{ 0x06, 0x834a },
-		{ 0x06, 0xffee },
-		{ 0x06, 0x834b },
-		{ 0x06, 0xffe0 },
-		{ 0x06, 0x8330 },
-		{ 0x06, 0xe183 },
-		{ 0x06, 0x3158 },
-		{ 0x06, 0xfee4 },
-		{ 0x06, 0xf88a },
-		{ 0x06, 0xe5f8 },
-		{ 0x06, 0x8be0 },
-		{ 0x06, 0x8332 },
-		{ 0x06, 0xe183 },
-		{ 0x06, 0x3359 },
-		{ 0x06, 0x0fe2 },
-		{ 0x06, 0x834d },
-		{ 0x06, 0x0c24 },
-		{ 0x06, 0x5af0 },
-		{ 0x06, 0x1e12 },
-		{ 0x06, 0xe4f8 },
-		{ 0x06, 0x8ce5 },
-		{ 0x06, 0xf88d },
-		{ 0x06, 0xaf82 },
-		{ 0x06, 0x13e0 },
-		{ 0x06, 0x834f },
-		{ 0x06, 0x10e4 },
-		{ 0x06, 0x834f },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4e78 },
-		{ 0x06, 0x009f },
-		{ 0x06, 0x0ae0 },
-		{ 0x06, 0x834f },
-		{ 0x06, 0xa010 },
-		{ 0x06, 0xa5ee },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x01e0 },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x7805 },
-		{ 0x06, 0x9e9a },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4e78 },
-		{ 0x06, 0x049e },
-		{ 0x06, 0x10e0 },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x7803 },
-		{ 0x06, 0x9e0f },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4e78 },
-		{ 0x06, 0x019e },
-		{ 0x06, 0x05ae },
-		{ 0x06, 0x0caf },
-		{ 0x06, 0x81f8 },
-		{ 0x06, 0xaf81 },
-		{ 0x06, 0xa3af },
-		{ 0x06, 0x81dc },
-		{ 0x06, 0xaf82 },
-		{ 0x06, 0x13ee },
-		{ 0x06, 0x8348 },
-		{ 0x06, 0x00ee },
-		{ 0x06, 0x8349 },
-		{ 0x06, 0x00e0 },
-		{ 0x06, 0x8351 },
-		{ 0x06, 0x10e4 },
-		{ 0x06, 0x8351 },
-		{ 0x06, 0x5801 },
-		{ 0x06, 0x9fea },
-		{ 0x06, 0xd000 },
-		{ 0x06, 0xd180 },
-		{ 0x06, 0x1f66 },
-		{ 0x06, 0xe2f8 },
-		{ 0x06, 0xeae3 },
-		{ 0x06, 0xf8eb },
-		{ 0x06, 0x5af8 },
-		{ 0x06, 0x1e20 },
-		{ 0x06, 0xe6f8 },
-		{ 0x06, 0xeae5 },
-		{ 0x06, 0xf8eb },
-		{ 0x06, 0xd302 },
-		{ 0x06, 0xb3fe },
-		{ 0x06, 0xe2f8 },
-		{ 0x06, 0x7cef },
-		{ 0x06, 0x325b },
-		{ 0x06, 0x80e3 },
-		{ 0x06, 0xf87d },
-		{ 0x06, 0x9e03 },
-		{ 0x06, 0x7dff },
-		{ 0x06, 0xff0d },
-		{ 0x06, 0x581c },
-		{ 0x06, 0x551a },
-		{ 0x06, 0x6511 },
-		{ 0x06, 0xa190 },
-		{ 0x06, 0xd3e2 },
-		{ 0x06, 0x8348 },
-		{ 0x06, 0xe383 },
-		{ 0x06, 0x491b },
-		{ 0x06, 0x56ab },
-		{ 0x06, 0x08ef },
-		{ 0x06, 0x56e6 },
-		{ 0x06, 0x8348 },
-		{ 0x06, 0xe783 },
-		{ 0x06, 0x4910 },
-		{ 0x06, 0xd180 },
-		{ 0x06, 0x1f66 },
-		{ 0x06, 0xa004 },
-		{ 0x06, 0xb9e2 },
-		{ 0x06, 0x8348 },
-		{ 0x06, 0xe383 },
-		{ 0x06, 0x49ef },
-		{ 0x06, 0x65e2 },
-		{ 0x06, 0x834a },
-		{ 0x06, 0xe383 },
-		{ 0x06, 0x4b1b },
-		{ 0x06, 0x56aa },
-		{ 0x06, 0x0eef },
-		{ 0x06, 0x56e6 },
-		{ 0x06, 0x834a },
-		{ 0x06, 0xe783 },
-		{ 0x06, 0x4be2 },
-		{ 0x06, 0x834d },
-		{ 0x06, 0xe683 },
-		{ 0x06, 0x4ce0 },
-		{ 0x06, 0x834d },
-		{ 0x06, 0xa000 },
-		{ 0x06, 0x0caf },
-		{ 0x06, 0x81dc },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4d10 },
-		{ 0x06, 0xe483 },
-		{ 0x06, 0x4dae },
-		{ 0x06, 0x0480 },
-		{ 0x06, 0xe483 },
-		{ 0x06, 0x4de0 },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x7803 },
-		{ 0x06, 0x9e0b },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4e78 },
-		{ 0x06, 0x049e },
-		{ 0x06, 0x04ee },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x02e0 },
-		{ 0x06, 0x8332 },
-		{ 0x06, 0xe183 },
-		{ 0x06, 0x3359 },
-		{ 0x06, 0x0fe2 },
-		{ 0x06, 0x834d },
-		{ 0x06, 0x0c24 },
-		{ 0x06, 0x5af0 },
-		{ 0x06, 0x1e12 },
-		{ 0x06, 0xe4f8 },
-		{ 0x06, 0x8ce5 },
-		{ 0x06, 0xf88d },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x30e1 },
-		{ 0x06, 0x8331 },
-		{ 0x06, 0x6801 },
-		{ 0x06, 0xe4f8 },
-		{ 0x06, 0x8ae5 },
-		{ 0x06, 0xf88b },
-		{ 0x06, 0xae37 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4e03 },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4ce1 },
-		{ 0x06, 0x834d },
-		{ 0x06, 0x1b01 },
-		{ 0x06, 0x9e04 },
-		{ 0x06, 0xaaa1 },
-		{ 0x06, 0xaea8 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4e04 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4f00 },
-		{ 0x06, 0xaeab },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4f78 },
-		{ 0x06, 0x039f },
-		{ 0x06, 0x14ee },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x05d2 },
-		{ 0x06, 0x40d6 },
-		{ 0x06, 0x5554 },
-		{ 0x06, 0x0282 },
-		{ 0x06, 0x17d2 },
-		{ 0x06, 0xa0d6 },
-		{ 0x06, 0xba00 },
-		{ 0x06, 0x0282 },
-		{ 0x06, 0x17fe },
-		{ 0x06, 0xfdfc },
-		{ 0x06, 0x05f8 },
-		{ 0x06, 0xe0f8 },
-		{ 0x06, 0x60e1 },
-		{ 0x06, 0xf861 },
-		{ 0x06, 0x6802 },
-		{ 0x06, 0xe4f8 },
-		{ 0x06, 0x60e5 },
-		{ 0x06, 0xf861 },
-		{ 0x06, 0xe0f8 },
-		{ 0x06, 0x48e1 },
-		{ 0x06, 0xf849 },
-		{ 0x06, 0x580f },
-		{ 0x06, 0x1e02 },
-		{ 0x06, 0xe4f8 },
-		{ 0x06, 0x48e5 },
-		{ 0x06, 0xf849 },
-		{ 0x06, 0xd000 },
-		{ 0x06, 0x0282 },
-		{ 0x06, 0x5bbf },
-		{ 0x06, 0x8350 },
-		{ 0x06, 0xef46 },
-		{ 0x06, 0xdc19 },
-		{ 0x06, 0xddd0 },
-		{ 0x06, 0x0102 },
-		{ 0x06, 0x825b },
-		{ 0x06, 0x0282 },
-		{ 0x06, 0x77e0 },
-		{ 0x06, 0xf860 },
-		{ 0x06, 0xe1f8 },
-		{ 0x06, 0x6158 },
-		{ 0x06, 0xfde4 },
-		{ 0x06, 0xf860 },
-		{ 0x06, 0xe5f8 },
-		{ 0x06, 0x61fc },
-		{ 0x06, 0x04f9 },
-		{ 0x06, 0xfafb },
-		{ 0x06, 0xc6bf },
-		{ 0x06, 0xf840 },
-		{ 0x06, 0xbe83 },
-		{ 0x06, 0x50a0 },
-		{ 0x06, 0x0101 },
-		{ 0x06, 0x071b },
-		{ 0x06, 0x89cf },
-		{ 0x06, 0xd208 },
-		{ 0x06, 0xebdb },
-		{ 0x06, 0x19b2 },
-		{ 0x06, 0xfbff },
-		{ 0x06, 0xfefd },
-		{ 0x06, 0x04f8 },
-		{ 0x06, 0xe0f8 },
-		{ 0x06, 0x48e1 },
-		{ 0x06, 0xf849 },
-		{ 0x06, 0x6808 },
-		{ 0x06, 0xe4f8 },
-		{ 0x06, 0x48e5 },
-		{ 0x06, 0xf849 },
-		{ 0x06, 0x58f7 },
-		{ 0x06, 0xe4f8 },
-		{ 0x06, 0x48e5 },
-		{ 0x06, 0xf849 },
-		{ 0x06, 0xfc04 },
-		{ 0x06, 0x4d20 },
-		{ 0x06, 0x0002 },
-		{ 0x06, 0x4e22 },
-		{ 0x06, 0x0002 },
-		{ 0x06, 0x4ddf },
-		{ 0x06, 0xff01 },
-		{ 0x06, 0x4edd },
-		{ 0x06, 0xff01 },
-		{ 0x05, 0x83d4 },
-		{ 0x06, 0x8000 },
-		{ 0x05, 0x83d8 },
-		{ 0x06, 0x8051 },
-		{ 0x02, 0x6010 },
-		{ 0x03, 0xdc00 },
-		{ 0x05, 0xfff6 },
-		{ 0x06, 0x00fc },
-		{ 0x1f, 0x0000 },
+		{ 0x06, 0x5561 },
+
+		/*
+		 * Can not link to 1Gbps with bad cable
+		 * Decrease SNR threshold form 21.07dB to 19.04dB
+		 */
+		{ 0x1f, 0x0001 },
+		{ 0x17, 0x0cc0 },
 
 		{ 0x1f, 0x0000 },
-		{ 0x0d, 0xf880 },
-		{ 0x1f, 0x0000 }
+		{ 0x0d, 0xf880 }
 	};
+	void __iomem *ioaddr = tp->mmio_addr;
+	const struct firmware *fw;
 
-	rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
-
-	mdio_write(ioaddr, 0x1f, 0x0002);
-	mdio_plus_minus(ioaddr, 0x0b, 0x0010, 0x00ef);
-	mdio_plus_minus(ioaddr, 0x0c, 0xa200, 0x5d00);
+	rtl_writephy_batch(tp, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
 
-	rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
+	/*
+	 * Rx Error Issue
+	 * Fine Tune Switching regulator parameter
+	 */
+	rtl_writephy(tp, 0x1f, 0x0002);
+	rtl_w1w0_phy(tp, 0x0b, 0x0010, 0x00ef);
+	rtl_w1w0_phy(tp, 0x0c, 0xa200, 0x5d00);
 
 	if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
 		static const struct phy_reg phy_reg_init[] = {
@@ -2118,9 +2064,9 @@ static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr)
 		};
 		int val;
 
-		rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+		rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 
-		val = mdio_read(ioaddr, 0x0d);
+		val = rtl_readphy(tp, 0x0d);
 
 		if ((val & 0x00ff) != 0x006c) {
 			static const u32 set[] = {
@@ -2129,11 +2075,11 @@ static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr)
 			};
 			int i;
 
-			mdio_write(ioaddr, 0x1f, 0x0002);
+			rtl_writephy(tp, 0x1f, 0x0002);
 
 			val &= 0xff00;
 			for (i = 0; i < ARRAY_SIZE(set); i++)
-				mdio_write(ioaddr, 0x0d, val | set[i]);
+				rtl_writephy(tp, 0x0d, val | set[i]);
 		}
 	} else {
 		static const struct phy_reg phy_reg_init[] = {
@@ -2144,23 +2090,36 @@ static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr)
 			{ 0x06, 0x6662 }
 		};
 
-		rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+		rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 	}
 
-	mdio_write(ioaddr, 0x1f, 0x0002);
-	mdio_patch(ioaddr, 0x0d, 0x0300);
-	mdio_patch(ioaddr, 0x0f, 0x0010);
-
-	mdio_write(ioaddr, 0x1f, 0x0002);
-	mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600);
-	mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000);
+	/* RSET couple improve */
+	rtl_writephy(tp, 0x1f, 0x0002);
+	rtl_patchphy(tp, 0x0d, 0x0300);
+	rtl_patchphy(tp, 0x0f, 0x0010);
+
+	/* Fine tune PLL performance */
+	rtl_writephy(tp, 0x1f, 0x0002);
+	rtl_w1w0_phy(tp, 0x02, 0x0100, 0x0600);
+	rtl_w1w0_phy(tp, 0x03, 0x0000, 0xe000);
+
+	rtl_writephy(tp, 0x1f, 0x0005);
+	rtl_writephy(tp, 0x05, 0x001b);
+	if (rtl_readphy(tp, 0x06) == 0xbf00 &&
+	    request_firmware(&fw, FIRMWARE_8168D_1, &tp->pci_dev->dev) == 0) {
+		rtl_phy_write_fw(tp, fw);
+		release_firmware(fw);
+	} else {
+		netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n");
+	}
 
-	rtl_phy_write(ioaddr, phy_reg_init_2, ARRAY_SIZE(phy_reg_init_2));
+	rtl_writephy(tp, 0x1f, 0x0000);
 }
 
-static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168d_2_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init_0[] = {
+		/* Channel Estimation */
 		{ 0x1f, 0x0001 },
 		{ 0x06, 0x4064 },
 		{ 0x07, 0x2863 },
@@ -2179,326 +2138,30 @@ static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1a, 0x05ad },
 		{ 0x14, 0x94c0 },
 
+		/*
+		 * Tx Error Issue
+		 * enhance line driver power
+		 */
 		{ 0x1f, 0x0002 },
 		{ 0x06, 0x5561 },
 		{ 0x1f, 0x0005 },
 		{ 0x05, 0x8332 },
-		{ 0x06, 0x5561 }
-	};
-	static const struct phy_reg phy_reg_init_1[] = {
-		{ 0x1f, 0x0005 },
-		{ 0x05, 0xffc2 },
-		{ 0x1f, 0x0005 },
-		{ 0x05, 0x8000 },
-		{ 0x06, 0xf8f9 },
-		{ 0x06, 0xfaee },
-		{ 0x06, 0xf8ea },
-		{ 0x06, 0x00ee },
-		{ 0x06, 0xf8eb },
-		{ 0x06, 0x00e2 },
-		{ 0x06, 0xf87c },
-		{ 0x06, 0xe3f8 },
-		{ 0x06, 0x7da5 },
-		{ 0x06, 0x1111 },
-		{ 0x06, 0x12d2 },
-		{ 0x06, 0x40d6 },
-		{ 0x06, 0x4444 },
-		{ 0x06, 0x0281 },
-		{ 0x06, 0xc6d2 },
-		{ 0x06, 0xa0d6 },
-		{ 0x06, 0xaaaa },
-		{ 0x06, 0x0281 },
-		{ 0x06, 0xc6ae },
-		{ 0x06, 0x0fa5 },
-		{ 0x06, 0x4444 },
-		{ 0x06, 0x02ae },
-		{ 0x06, 0x4da5 },
-		{ 0x06, 0xaaaa },
-		{ 0x06, 0x02ae },
-		{ 0x06, 0x47af },
-		{ 0x06, 0x81c2 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4e00 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4d0f },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4c0f },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4f00 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x5100 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4aff },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4bff },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x30e1 },
-		{ 0x06, 0x8331 },
-		{ 0x06, 0x58fe },
-		{ 0x06, 0xe4f8 },
-		{ 0x06, 0x8ae5 },
-		{ 0x06, 0xf88b },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x32e1 },
-		{ 0x06, 0x8333 },
-		{ 0x06, 0x590f },
-		{ 0x06, 0xe283 },
-		{ 0x06, 0x4d0c },
-		{ 0x06, 0x245a },
-		{ 0x06, 0xf01e },
-		{ 0x06, 0x12e4 },
-		{ 0x06, 0xf88c },
-		{ 0x06, 0xe5f8 },
-		{ 0x06, 0x8daf },
-		{ 0x06, 0x81c2 },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4f10 },
-		{ 0x06, 0xe483 },
-		{ 0x06, 0x4fe0 },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x7800 },
-		{ 0x06, 0x9f0a },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4fa0 },
-		{ 0x06, 0x10a5 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4e01 },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4e78 },
-		{ 0x06, 0x059e },
-		{ 0x06, 0x9ae0 },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x7804 },
-		{ 0x06, 0x9e10 },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4e78 },
-		{ 0x06, 0x039e },
-		{ 0x06, 0x0fe0 },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x7801 },
-		{ 0x06, 0x9e05 },
-		{ 0x06, 0xae0c },
-		{ 0x06, 0xaf81 },
-		{ 0x06, 0xa7af },
-		{ 0x06, 0x8152 },
-		{ 0x06, 0xaf81 },
-		{ 0x06, 0x8baf },
-		{ 0x06, 0x81c2 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4800 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4900 },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x5110 },
-		{ 0x06, 0xe483 },
-		{ 0x06, 0x5158 },
-		{ 0x06, 0x019f },
-		{ 0x06, 0xead0 },
-		{ 0x06, 0x00d1 },
-		{ 0x06, 0x801f },
-		{ 0x06, 0x66e2 },
-		{ 0x06, 0xf8ea },
-		{ 0x06, 0xe3f8 },
-		{ 0x06, 0xeb5a },
-		{ 0x06, 0xf81e },
-		{ 0x06, 0x20e6 },
-		{ 0x06, 0xf8ea },
-		{ 0x06, 0xe5f8 },
-		{ 0x06, 0xebd3 },
-		{ 0x06, 0x02b3 },
-		{ 0x06, 0xfee2 },
-		{ 0x06, 0xf87c },
-		{ 0x06, 0xef32 },
-		{ 0x06, 0x5b80 },
-		{ 0x06, 0xe3f8 },
-		{ 0x06, 0x7d9e },
-		{ 0x06, 0x037d },
-		{ 0x06, 0xffff },
-		{ 0x06, 0x0d58 },
-		{ 0x06, 0x1c55 },
-		{ 0x06, 0x1a65 },
-		{ 0x06, 0x11a1 },
-		{ 0x06, 0x90d3 },
-		{ 0x06, 0xe283 },
-		{ 0x06, 0x48e3 },
-		{ 0x06, 0x8349 },
-		{ 0x06, 0x1b56 },
-		{ 0x06, 0xab08 },
-		{ 0x06, 0xef56 },
-		{ 0x06, 0xe683 },
-		{ 0x06, 0x48e7 },
-		{ 0x06, 0x8349 },
-		{ 0x06, 0x10d1 },
-		{ 0x06, 0x801f },
-		{ 0x06, 0x66a0 },
-		{ 0x06, 0x04b9 },
-		{ 0x06, 0xe283 },
-		{ 0x06, 0x48e3 },
-		{ 0x06, 0x8349 },
-		{ 0x06, 0xef65 },
-		{ 0x06, 0xe283 },
-		{ 0x06, 0x4ae3 },
-		{ 0x06, 0x834b },
-		{ 0x06, 0x1b56 },
-		{ 0x06, 0xaa0e },
-		{ 0x06, 0xef56 },
-		{ 0x06, 0xe683 },
-		{ 0x06, 0x4ae7 },
-		{ 0x06, 0x834b },
-		{ 0x06, 0xe283 },
-		{ 0x06, 0x4de6 },
-		{ 0x06, 0x834c },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4da0 },
-		{ 0x06, 0x000c },
-		{ 0x06, 0xaf81 },
-		{ 0x06, 0x8be0 },
-		{ 0x06, 0x834d },
-		{ 0x06, 0x10e4 },
-		{ 0x06, 0x834d },
-		{ 0x06, 0xae04 },
-		{ 0x06, 0x80e4 },
-		{ 0x06, 0x834d },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x4e78 },
-		{ 0x06, 0x039e },
-		{ 0x06, 0x0be0 },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x7804 },
-		{ 0x06, 0x9e04 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4e02 },
-		{ 0x06, 0xe083 },
-		{ 0x06, 0x32e1 },
-		{ 0x06, 0x8333 },
-		{ 0x06, 0x590f },
-		{ 0x06, 0xe283 },
-		{ 0x06, 0x4d0c },
-		{ 0x06, 0x245a },
-		{ 0x06, 0xf01e },
-		{ 0x06, 0x12e4 },
-		{ 0x06, 0xf88c },
-		{ 0x06, 0xe5f8 },
-		{ 0x06, 0x8de0 },
-		{ 0x06, 0x8330 },
-		{ 0x06, 0xe183 },
-		{ 0x06, 0x3168 },
-		{ 0x06, 0x01e4 },
-		{ 0x06, 0xf88a },
-		{ 0x06, 0xe5f8 },
-		{ 0x06, 0x8bae },
-		{ 0x06, 0x37ee },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x03e0 },
-		{ 0x06, 0x834c },
-		{ 0x06, 0xe183 },
-		{ 0x06, 0x4d1b },
-		{ 0x06, 0x019e },
-		{ 0x06, 0x04aa },
-		{ 0x06, 0xa1ae },
-		{ 0x06, 0xa8ee },
-		{ 0x06, 0x834e },
-		{ 0x06, 0x04ee },
-		{ 0x06, 0x834f },
-		{ 0x06, 0x00ae },
-		{ 0x06, 0xabe0 },
-		{ 0x06, 0x834f },
-		{ 0x06, 0x7803 },
-		{ 0x06, 0x9f14 },
-		{ 0x06, 0xee83 },
-		{ 0x06, 0x4e05 },
-		{ 0x06, 0xd240 },
-		{ 0x06, 0xd655 },
-		{ 0x06, 0x5402 },
-		{ 0x06, 0x81c6 },
-		{ 0x06, 0xd2a0 },
-		{ 0x06, 0xd6ba },
-		{ 0x06, 0x0002 },
-		{ 0x06, 0x81c6 },
-		{ 0x06, 0xfefd },
-		{ 0x06, 0xfc05 },
-		{ 0x06, 0xf8e0 },
-		{ 0x06, 0xf860 },
-		{ 0x06, 0xe1f8 },
-		{ 0x06, 0x6168 },
-		{ 0x06, 0x02e4 },
-		{ 0x06, 0xf860 },
-		{ 0x06, 0xe5f8 },
-		{ 0x06, 0x61e0 },
-		{ 0x06, 0xf848 },
-		{ 0x06, 0xe1f8 },
-		{ 0x06, 0x4958 },
-		{ 0x06, 0x0f1e },
-		{ 0x06, 0x02e4 },
-		{ 0x06, 0xf848 },
-		{ 0x06, 0xe5f8 },
-		{ 0x06, 0x49d0 },
-		{ 0x06, 0x0002 },
-		{ 0x06, 0x820a },
-		{ 0x06, 0xbf83 },
-		{ 0x06, 0x50ef },
-		{ 0x06, 0x46dc },
-		{ 0x06, 0x19dd },
-		{ 0x06, 0xd001 },
-		{ 0x06, 0x0282 },
-		{ 0x06, 0x0a02 },
-		{ 0x06, 0x8226 },
-		{ 0x06, 0xe0f8 },
-		{ 0x06, 0x60e1 },
-		{ 0x06, 0xf861 },
-		{ 0x06, 0x58fd },
-		{ 0x06, 0xe4f8 },
-		{ 0x06, 0x60e5 },
-		{ 0x06, 0xf861 },
-		{ 0x06, 0xfc04 },
-		{ 0x06, 0xf9fa },
-		{ 0x06, 0xfbc6 },
-		{ 0x06, 0xbff8 },
-		{ 0x06, 0x40be },
-		{ 0x06, 0x8350 },
-		{ 0x06, 0xa001 },
-		{ 0x06, 0x0107 },
-		{ 0x06, 0x1b89 },
-		{ 0x06, 0xcfd2 },
-		{ 0x06, 0x08eb },
-		{ 0x06, 0xdb19 },
-		{ 0x06, 0xb2fb },
-		{ 0x06, 0xfffe },
-		{ 0x06, 0xfd04 },
-		{ 0x06, 0xf8e0 },
-		{ 0x06, 0xf848 },
-		{ 0x06, 0xe1f8 },
-		{ 0x06, 0x4968 },
-		{ 0x06, 0x08e4 },
-		{ 0x06, 0xf848 },
-		{ 0x06, 0xe5f8 },
-		{ 0x06, 0x4958 },
-		{ 0x06, 0xf7e4 },
-		{ 0x06, 0xf848 },
-		{ 0x06, 0xe5f8 },
-		{ 0x06, 0x49fc },
-		{ 0x06, 0x044d },
-		{ 0x06, 0x2000 },
-		{ 0x06, 0x024e },
-		{ 0x06, 0x2200 },
-		{ 0x06, 0x024d },
-		{ 0x06, 0xdfff },
-		{ 0x06, 0x014e },
-		{ 0x06, 0xddff },
-		{ 0x06, 0x0100 },
-		{ 0x05, 0x83d8 },
-		{ 0x06, 0x8000 },
-		{ 0x03, 0xdc00 },
-		{ 0x05, 0xfff6 },
-		{ 0x06, 0x00fc },
-		{ 0x1f, 0x0000 },
+		{ 0x06, 0x5561 },
+
+		/*
+		 * Can not link to 1Gbps with bad cable
+		 * Decrease SNR threshold form 21.07dB to 19.04dB
+		 */
+		{ 0x1f, 0x0001 },
+		{ 0x17, 0x0cc0 },
 
 		{ 0x1f, 0x0000 },
-		{ 0x0d, 0xf880 },
-		{ 0x1f, 0x0000 }
+		{ 0x0d, 0xf880 }
 	};
+	void __iomem *ioaddr = tp->mmio_addr;
+	const struct firmware *fw;
 
-	rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
+	rtl_writephy_batch(tp, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
 
 	if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
 		static const struct phy_reg phy_reg_init[] = {
@@ -2512,21 +2175,21 @@ static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr)
 		};
 		int val;
 
-		rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+		rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 
-		val = mdio_read(ioaddr, 0x0d);
+		val = rtl_readphy(tp, 0x0d);
 		if ((val & 0x00ff) != 0x006c) {
-			u32 set[] = {
+			static const u32 set[] = {
 				0x0065, 0x0066, 0x0067, 0x0068,
 				0x0069, 0x006a, 0x006b, 0x006c
 			};
 			int i;
 
-			mdio_write(ioaddr, 0x1f, 0x0002);
+			rtl_writephy(tp, 0x1f, 0x0002);
 
 			val &= 0xff00;
 			for (i = 0; i < ARRAY_SIZE(set); i++)
-				mdio_write(ioaddr, 0x0d, val | set[i]);
+				rtl_writephy(tp, 0x0d, val | set[i]);
 		}
 	} else {
 		static const struct phy_reg phy_reg_init[] = {
@@ -2537,23 +2200,32 @@ static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr)
 			{ 0x06, 0x2642 }
 		};
 
-		rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+		rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 	}
 
-	mdio_write(ioaddr, 0x1f, 0x0002);
-	mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600);
-	mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000);
-
-	mdio_write(ioaddr, 0x1f, 0x0001);
-	mdio_write(ioaddr, 0x17, 0x0cc0);
-
-	mdio_write(ioaddr, 0x1f, 0x0002);
-	mdio_patch(ioaddr, 0x0f, 0x0017);
+	/* Fine tune PLL performance */
+	rtl_writephy(tp, 0x1f, 0x0002);
+	rtl_w1w0_phy(tp, 0x02, 0x0100, 0x0600);
+	rtl_w1w0_phy(tp, 0x03, 0x0000, 0xe000);
+
+	/* Switching regulator Slew rate */
+	rtl_writephy(tp, 0x1f, 0x0002);
+	rtl_patchphy(tp, 0x0f, 0x0017);
+
+	rtl_writephy(tp, 0x1f, 0x0005);
+	rtl_writephy(tp, 0x05, 0x001b);
+	if (rtl_readphy(tp, 0x06) == 0xb300 &&
+	    request_firmware(&fw, FIRMWARE_8168D_2, &tp->pci_dev->dev) == 0) {
+		rtl_phy_write_fw(tp, fw);
+		release_firmware(fw);
+	} else {
+		netif_warn(tp, probe, tp->dev, "unable to apply firmware patch\n");
+	}
 
-	rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
+	rtl_writephy(tp, 0x1f, 0x0000);
 }
 
-static void rtl8168d_3_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168d_3_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0002 },
@@ -2611,10 +2283,26 @@ static void rtl8168d_3_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1f, 0x0000 }
 	};
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
 
-static void rtl8102e_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168d_4_hw_phy_config(struct rtl8169_private *tp)
+{
+	static const struct phy_reg phy_reg_init[] = {
+		{ 0x1f, 0x0001 },
+		{ 0x17, 0x0cc0 },
+
+		{ 0x1f, 0x0007 },
+		{ 0x1e, 0x002d },
+		{ 0x18, 0x0040 },
+		{ 0x1f, 0x0000 }
+	};
+
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_patchphy(tp, 0x0d, 1 << 5);
+}
+
+static void rtl8102e_hw_phy_config(struct rtl8169_private *tp)
 {
 	static const struct phy_reg phy_reg_init[] = {
 		{ 0x1f, 0x0003 },
@@ -2623,18 +2311,17 @@ static void rtl8102e_hw_phy_config(void __iomem *ioaddr)
 		{ 0x1f, 0x0000 }
 	};
 
-	mdio_write(ioaddr, 0x1f, 0x0000);
-	mdio_patch(ioaddr, 0x11, 1 << 12);
-	mdio_patch(ioaddr, 0x19, 1 << 13);
-	mdio_patch(ioaddr, 0x10, 1 << 15);
+	rtl_writephy(tp, 0x1f, 0x0000);
+	rtl_patchphy(tp, 0x11, 1 << 12);
+	rtl_patchphy(tp, 0x19, 1 << 13);
+	rtl_patchphy(tp, 0x10, 1 << 15);
 
-	rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+	rtl_writephy_batch(tp, phy_reg_init, ARRAY_SIZE(phy_reg_init));
 }
 
 static void rtl_hw_phy_config(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
-	void __iomem *ioaddr = tp->mmio_addr;
 
 	rtl8169_print_mac_version(tp);
 
@@ -2643,58 +2330,61 @@ static void rtl_hw_phy_config(struct net_device *dev)
 		break;
 	case RTL_GIGA_MAC_VER_02:
 	case RTL_GIGA_MAC_VER_03:
-		rtl8169s_hw_phy_config(ioaddr);
+		rtl8169s_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_04:
-		rtl8169sb_hw_phy_config(ioaddr);
+		rtl8169sb_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_05:
-		rtl8169scd_hw_phy_config(tp, ioaddr);
+		rtl8169scd_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_06:
-		rtl8169sce_hw_phy_config(ioaddr);
+		rtl8169sce_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_07:
 	case RTL_GIGA_MAC_VER_08:
 	case RTL_GIGA_MAC_VER_09:
-		rtl8102e_hw_phy_config(ioaddr);
+		rtl8102e_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_11:
-		rtl8168bb_hw_phy_config(ioaddr);
+		rtl8168bb_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_12:
-		rtl8168bef_hw_phy_config(ioaddr);
+		rtl8168bef_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_17:
-		rtl8168bef_hw_phy_config(ioaddr);
+		rtl8168bef_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_18:
-		rtl8168cp_1_hw_phy_config(ioaddr);
+		rtl8168cp_1_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_19:
-		rtl8168c_1_hw_phy_config(ioaddr);
+		rtl8168c_1_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_20:
-		rtl8168c_2_hw_phy_config(ioaddr);
+		rtl8168c_2_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_21:
-		rtl8168c_3_hw_phy_config(ioaddr);
+		rtl8168c_3_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_22:
-		rtl8168c_4_hw_phy_config(ioaddr);
+		rtl8168c_4_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_23:
 	case RTL_GIGA_MAC_VER_24:
-		rtl8168cp_2_hw_phy_config(ioaddr);
+		rtl8168cp_2_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_25:
-		rtl8168d_1_hw_phy_config(ioaddr);
+		rtl8168d_1_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_26:
-		rtl8168d_2_hw_phy_config(ioaddr);
+		rtl8168d_2_hw_phy_config(tp);
 		break;
 	case RTL_GIGA_MAC_VER_27:
-		rtl8168d_3_hw_phy_config(ioaddr);
+		rtl8168d_3_hw_phy_config(tp);
+		break;
+	case RTL_GIGA_MAC_VER_28:
+		rtl8168d_4_hw_phy_config(tp);
 		break;
 
 	default:
@@ -2717,7 +2407,7 @@ static void rtl8169_phy_timer(unsigned long __opaque)
 
 	spin_lock_irq(&tp->lock);
 
-	if (tp->phy_reset_pending(ioaddr)) {
+	if (tp->phy_reset_pending(tp)) {
 		/*
 		 * A busy loop could burn quite a few cycles on nowadays CPU.
 		 * Let's delay the execution of the timer for a few ticks.
@@ -2731,7 +2421,7 @@ static void rtl8169_phy_timer(unsigned long __opaque)
 
 	netif_warn(tp, link, dev, "PHY reset until link up\n");
 
-	tp->phy_reset_enable(ioaddr);
+	tp->phy_reset_enable(tp);
 
 out_mod_timer:
 	mod_timer(timer, jiffies + timeout);
@@ -2791,12 +2481,11 @@ static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev,
 static void rtl8169_phy_reset(struct net_device *dev,
 			      struct rtl8169_private *tp)
 {
-	void __iomem *ioaddr = tp->mmio_addr;
 	unsigned int i;
 
-	tp->phy_reset_enable(ioaddr);
+	tp->phy_reset_enable(tp);
 	for (i = 0; i < 100; i++) {
-		if (!tp->phy_reset_pending(ioaddr))
+		if (!tp->phy_reset_pending(tp))
 			return;
 		msleep(1);
 	}
@@ -2823,7 +2512,7 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
 		dprintk("Set MAC Reg C+CR Offset 0x82h = 0x01h\n");
 		RTL_W8(0x82, 0x01);
 		dprintk("Set PHY Reg 0x0bh = 0x00h\n");
-		mdio_write(ioaddr, 0x0b, 0x0000); //w 0x0b 15 0 0
+		rtl_writephy(tp, 0x0b, 0x0000); //w 0x0b 15 0 0
 	}
 
 	rtl8169_phy_reset(dev, tp);
@@ -2893,11 +2582,11 @@ static int rtl_xmii_ioctl(struct rtl8169_private *tp, struct mii_ioctl_data *dat
 		return 0;
 
 	case SIOCGMIIREG:
-		data->val_out = mdio_read(tp->mmio_addr, data->reg_num & 0x1f);
+		data->val_out = rtl_readphy(tp, data->reg_num & 0x1f);
 		return 0;
 
 	case SIOCSMIIREG:
-		mdio_write(tp->mmio_addr, data->reg_num & 0x1f, data->val_in);
+		rtl_writephy(tp, data->reg_num & 0x1f, data->val_in);
 		return 0;
 	}
 	return -EOPNOTSUPP;
@@ -2931,7 +2620,7 @@ static const struct rtl_cfg_info {
 		.hw_start	= rtl_hw_start_8168,
 		.region		= 2,
 		.align		= 8,
-		.intr_event	= SYSErr | RxFIFOOver | LinkChg | RxOverflow |
+		.intr_event	= SYSErr | LinkChg | RxOverflow |
 				  TxErr | TxOK | RxOK | RxErr,
 		.napi_event	= TxErr | TxOK | RxOK | RxOverflow,
 		.features	= RTL_FEATURE_GMII | RTL_FEATURE_MSI,
@@ -2997,6 +2686,173 @@ static const struct net_device_ops rtl8169_netdev_ops = {
 
 };
 
+static void __devinit rtl_init_mdio_ops(struct rtl8169_private *tp)
+{
+	struct mdio_ops *ops = &tp->mdio_ops;
+
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_27:
+		ops->write	= r8168dp_1_mdio_write;
+		ops->read	= r8168dp_1_mdio_read;
+		break;
+	case RTL_GIGA_MAC_VER_28:
+		ops->write	= r8168dp_2_mdio_write;
+		ops->read	= r8168dp_2_mdio_read;
+		break;
+	default:
+		ops->write	= r8169_mdio_write;
+		ops->read	= r8169_mdio_read;
+		break;
+	}
+}
+
+static void r810x_phy_power_down(struct rtl8169_private *tp)
+{
+	rtl_writephy(tp, 0x1f, 0x0000);
+	rtl_writephy(tp, MII_BMCR, BMCR_PDOWN);
+}
+
+static void r810x_phy_power_up(struct rtl8169_private *tp)
+{
+	rtl_writephy(tp, 0x1f, 0x0000);
+	rtl_writephy(tp, MII_BMCR, BMCR_ANENABLE);
+}
+
+static void r810x_pll_power_down(struct rtl8169_private *tp)
+{
+	if (__rtl8169_get_wol(tp) & WAKE_ANY) {
+		rtl_writephy(tp, 0x1f, 0x0000);
+		rtl_writephy(tp, MII_BMCR, 0x0000);
+		return;
+	}
+
+	r810x_phy_power_down(tp);
+}
+
+static void r810x_pll_power_up(struct rtl8169_private *tp)
+{
+	r810x_phy_power_up(tp);
+}
+
+static void r8168_phy_power_up(struct rtl8169_private *tp)
+{
+	rtl_writephy(tp, 0x1f, 0x0000);
+	rtl_writephy(tp, 0x0e, 0x0000);
+	rtl_writephy(tp, MII_BMCR, BMCR_ANENABLE);
+}
+
+static void r8168_phy_power_down(struct rtl8169_private *tp)
+{
+	rtl_writephy(tp, 0x1f, 0x0000);
+	rtl_writephy(tp, 0x0e, 0x0200);
+	rtl_writephy(tp, MII_BMCR, BMCR_PDOWN);
+}
+
+static void r8168_pll_power_down(struct rtl8169_private *tp)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	if (tp->mac_version == RTL_GIGA_MAC_VER_27)
+		return;
+
+	if (((tp->mac_version == RTL_GIGA_MAC_VER_23) ||
+	     (tp->mac_version == RTL_GIGA_MAC_VER_24)) &&
+	    (RTL_R16(CPlusCmd) & ASF)) {
+		return;
+	}
+
+	if (__rtl8169_get_wol(tp) & WAKE_ANY) {
+		rtl_writephy(tp, 0x1f, 0x0000);
+		rtl_writephy(tp, MII_BMCR, 0x0000);
+
+		RTL_W32(RxConfig, RTL_R32(RxConfig) |
+			AcceptBroadcast | AcceptMulticast | AcceptMyPhys);
+		return;
+	}
+
+	r8168_phy_power_down(tp);
+
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_25:
+	case RTL_GIGA_MAC_VER_26:
+		RTL_W8(PMCH, RTL_R8(PMCH) & ~0x80);
+		break;
+	}
+}
+
+static void r8168_pll_power_up(struct rtl8169_private *tp)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	if (tp->mac_version == RTL_GIGA_MAC_VER_27)
+		return;
+
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_25:
+	case RTL_GIGA_MAC_VER_26:
+		RTL_W8(PMCH, RTL_R8(PMCH) | 0x80);
+		break;
+	}
+
+	r8168_phy_power_up(tp);
+}
+
+static void rtl_pll_power_op(struct rtl8169_private *tp,
+			     void (*op)(struct rtl8169_private *))
+{
+	if (op)
+		op(tp);
+}
+
+static void rtl_pll_power_down(struct rtl8169_private *tp)
+{
+	rtl_pll_power_op(tp, tp->pll_power_ops.down);
+}
+
+static void rtl_pll_power_up(struct rtl8169_private *tp)
+{
+	rtl_pll_power_op(tp, tp->pll_power_ops.up);
+}
+
+static void __devinit rtl_init_pll_power_ops(struct rtl8169_private *tp)
+{
+	struct pll_power_ops *ops = &tp->pll_power_ops;
+
+	switch (tp->mac_version) {
+	case RTL_GIGA_MAC_VER_07:
+	case RTL_GIGA_MAC_VER_08:
+	case RTL_GIGA_MAC_VER_09:
+	case RTL_GIGA_MAC_VER_10:
+	case RTL_GIGA_MAC_VER_16:
+		ops->down	= r810x_pll_power_down;
+		ops->up		= r810x_pll_power_up;
+		break;
+
+	case RTL_GIGA_MAC_VER_11:
+	case RTL_GIGA_MAC_VER_12:
+	case RTL_GIGA_MAC_VER_17:
+	case RTL_GIGA_MAC_VER_18:
+	case RTL_GIGA_MAC_VER_19:
+	case RTL_GIGA_MAC_VER_20:
+	case RTL_GIGA_MAC_VER_21:
+	case RTL_GIGA_MAC_VER_22:
+	case RTL_GIGA_MAC_VER_23:
+	case RTL_GIGA_MAC_VER_24:
+	case RTL_GIGA_MAC_VER_25:
+	case RTL_GIGA_MAC_VER_26:
+	case RTL_GIGA_MAC_VER_27:
+	case RTL_GIGA_MAC_VER_28:
+		ops->down	= r8168_pll_power_down;
+		ops->up		= r8168_pll_power_up;
+		break;
+
+	default:
+		ops->down	= NULL;
+		ops->up		= NULL;
+		break;
+	}
+}
+
 static int __devinit
 rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -3115,6 +2971,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	/* Identify chip attached to board */
 	rtl8169_get_mac_version(tp, ioaddr);
 
+	rtl_init_mdio_ops(tp);
+	rtl_init_pll_power_ops(tp);
+
 	/* Use appropriate default if unknown */
 	if (tp->mac_version == RTL_GIGA_MAC_NONE) {
 		netif_notice(tp, probe, dev,
@@ -3205,6 +3064,11 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		   dev->base_addr, dev->dev_addr,
 		   (u32)(RTL_R32(TxConfig) & 0x9cf0f8ff), dev->irq);
 
+	if ((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
+	    (tp->mac_version == RTL_GIGA_MAC_VER_28)) {
+		rtl8168_driver_start(tp);
+	}
+
 	rtl8169_init_phy(dev, tp);
 
 	/*
@@ -3240,7 +3104,12 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev)
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct rtl8169_private *tp = netdev_priv(dev);
 
-	flush_scheduled_work();
+	if ((tp->mac_version == RTL_GIGA_MAC_VER_27) ||
+	    (tp->mac_version == RTL_GIGA_MAC_VER_28)) {
+		rtl8168_driver_stop(tp);
+	}
+
+	cancel_delayed_work_sync(&tp->task);
 
 	unregister_netdev(dev);
 
@@ -3293,6 +3162,8 @@ static int rtl8169_open(struct net_device *dev)
 
 	napi_enable(&tp->napi);
 
+	rtl_pll_power_up(tp);
+
 	rtl_hw_start(dev);
 
 	rtl8169_request_timer(dev);
@@ -3319,11 +3190,19 @@ err_pm_runtime_put:
 	goto out;
 }
 
-static void rtl8169_hw_reset(void __iomem *ioaddr)
+static void rtl8169_hw_reset(struct rtl8169_private *tp)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
+
 	/* Disable interrupts */
 	rtl8169_irq_mask_and_ack(ioaddr);
 
+	if (tp->mac_version == RTL_GIGA_MAC_VER_28) {
+		while (RTL_R8(TxPoll) & NPQ)
+			udelay(20);
+
+	}
+
 	/* Reset the chipset */
 	RTL_W8(ChipCmd, CmdReset);
 
@@ -3437,7 +3316,7 @@ static void rtl_hw_start_8169(struct net_device *dev)
 	    (tp->mac_version == RTL_GIGA_MAC_VER_04))
 		RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
 
-	RTL_W8(EarlyTxThres, EarlyTxThld);
+	RTL_W8(EarlyTxThres, NoEarlyTx);
 
 	rtl_set_rx_max_size(ioaddr, rx_buf_sz);
 
@@ -3507,12 +3386,22 @@ static void rtl_tx_performance_tweak(struct pci_dev *pdev, u16 force)
 	}
 }
 
-static void rtl_csi_access_enable(void __iomem *ioaddr)
+static void rtl_csi_access_enable(void __iomem *ioaddr, u32 bits)
 {
 	u32 csi;
 
 	csi = rtl_csi_read(ioaddr, 0x070c) & 0x00ffffff;
-	rtl_csi_write(ioaddr, 0x070c, csi | 0x27000000);
+	rtl_csi_write(ioaddr, 0x070c, csi | bits);
+}
+
+static void rtl_csi_access_enable_1(void __iomem *ioaddr)
+{
+	rtl_csi_access_enable(ioaddr, 0x17000000);
+}
+
+static void rtl_csi_access_enable_2(void __iomem *ioaddr)
+{
+	rtl_csi_access_enable(ioaddr, 0x27000000);
 }
 
 struct ephy_info {
@@ -3547,6 +3436,21 @@ static void rtl_disable_clock_request(struct pci_dev *pdev)
 	}
 }
 
+static void rtl_enable_clock_request(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct rtl8169_private *tp = netdev_priv(dev);
+	int cap = tp->pcie_cap;
+
+	if (cap) {
+		u16 ctl;
+
+		pci_read_config_word(pdev, cap + PCI_EXP_LNKCTL, &ctl);
+		ctl |= PCI_EXP_LNKCTL_CLKREQ_EN;
+		pci_write_config_word(pdev, cap + PCI_EXP_LNKCTL, ctl);
+	}
+}
+
 #define R8168_CPCMD_QUIRK_MASK (\
 	EnableBist | \
 	Mac_dbgo_oe | \
@@ -3572,7 +3476,7 @@ static void rtl_hw_start_8168bef(void __iomem *ioaddr, struct pci_dev *pdev)
 {
 	rtl_hw_start_8168bb(ioaddr, pdev);
 
-	RTL_W8(EarlyTxThres, EarlyTxThld);
+	RTL_W8(MaxTxPacketSize, TxPacketMax);
 
 	RTL_W8(Config4, RTL_R8(Config4) & ~(1 << 0));
 }
@@ -3600,7 +3504,7 @@ static void rtl_hw_start_8168cp_1(void __iomem *ioaddr, struct pci_dev *pdev)
 		{ 0x07, 0,	0x2000 }
 	};
 
-	rtl_csi_access_enable(ioaddr);
+	rtl_csi_access_enable_2(ioaddr);
 
 	rtl_ephy_init(ioaddr, e_info_8168cp, ARRAY_SIZE(e_info_8168cp));
 
@@ -3609,7 +3513,7 @@ static void rtl_hw_start_8168cp_1(void __iomem *ioaddr, struct pci_dev *pdev)
 
 static void rtl_hw_start_8168cp_2(void __iomem *ioaddr, struct pci_dev *pdev)
 {
-	rtl_csi_access_enable(ioaddr);
+	rtl_csi_access_enable_2(ioaddr);
 
 	RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
 
@@ -3620,14 +3524,14 @@ static void rtl_hw_start_8168cp_2(void __iomem *ioaddr, struct pci_dev *pdev)
 
 static void rtl_hw_start_8168cp_3(void __iomem *ioaddr, struct pci_dev *pdev)
 {
-	rtl_csi_access_enable(ioaddr);
+	rtl_csi_access_enable_2(ioaddr);
 
 	RTL_W8(Config3, RTL_R8(Config3) & ~Beacon_en);
 
 	/* Magic. */
 	RTL_W8(DBG_REG, 0x20);
 
-	RTL_W8(EarlyTxThres, EarlyTxThld);
+	RTL_W8(MaxTxPacketSize, TxPacketMax);
 
 	rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
 
@@ -3642,7 +3546,7 @@ static void rtl_hw_start_8168c_1(void __iomem *ioaddr, struct pci_dev *pdev)
 		{ 0x06, 0x0080,	0x0000 }
 	};
 
-	rtl_csi_access_enable(ioaddr);
+	rtl_csi_access_enable_2(ioaddr);
 
 	RTL_W8(DBG_REG, 0x06 | FIX_NAK_1 | FIX_NAK_2);
 
@@ -3658,7 +3562,7 @@ static void rtl_hw_start_8168c_2(void __iomem *ioaddr, struct pci_dev *pdev)
 		{ 0x03, 0x0400,	0x0220 }
 	};
 
-	rtl_csi_access_enable(ioaddr);
+	rtl_csi_access_enable_2(ioaddr);
 
 	rtl_ephy_init(ioaddr, e_info_8168c_2, ARRAY_SIZE(e_info_8168c_2));
 
@@ -3672,24 +3576,50 @@ static void rtl_hw_start_8168c_3(void __iomem *ioaddr, struct pci_dev *pdev)
 
 static void rtl_hw_start_8168c_4(void __iomem *ioaddr, struct pci_dev *pdev)
 {
-	rtl_csi_access_enable(ioaddr);
+	rtl_csi_access_enable_2(ioaddr);
 
 	__rtl_hw_start_8168cp(ioaddr, pdev);
 }
 
 static void rtl_hw_start_8168d(void __iomem *ioaddr, struct pci_dev *pdev)
 {
-	rtl_csi_access_enable(ioaddr);
+	rtl_csi_access_enable_2(ioaddr);
 
 	rtl_disable_clock_request(pdev);
 
-	RTL_W8(EarlyTxThres, EarlyTxThld);
+	RTL_W8(MaxTxPacketSize, TxPacketMax);
 
 	rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
 
 	RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) & ~R8168_CPCMD_QUIRK_MASK);
 }
 
+static void rtl_hw_start_8168d_4(void __iomem *ioaddr, struct pci_dev *pdev)
+{
+	static const struct ephy_info e_info_8168d_4[] = {
+		{ 0x0b, ~0,	0x48 },
+		{ 0x19, 0x20,	0x50 },
+		{ 0x0c, ~0,	0x20 }
+	};
+	int i;
+
+	rtl_csi_access_enable_1(ioaddr);
+
+	rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
+
+	RTL_W8(MaxTxPacketSize, TxPacketMax);
+
+	for (i = 0; i < ARRAY_SIZE(e_info_8168d_4); i++) {
+		const struct ephy_info *e = e_info_8168d_4 + i;
+		u16 w;
+
+		w = rtl_ephy_read(ioaddr, e->offset);
+		rtl_ephy_write(ioaddr, 0x03, (w & e->mask) | e->bits);
+	}
+
+	rtl_enable_clock_request(pdev);
+}
+
 static void rtl_hw_start_8168(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
@@ -3698,7 +3628,7 @@ static void rtl_hw_start_8168(struct net_device *dev)
 
 	RTL_W8(Cfg9346, Cfg9346_Unlock);
 
-	RTL_W8(EarlyTxThres, EarlyTxThld);
+	RTL_W8(MaxTxPacketSize, TxPacketMax);
 
 	rtl_set_rx_max_size(ioaddr, rx_buf_sz);
 
@@ -3767,6 +3697,10 @@ static void rtl_hw_start_8168(struct net_device *dev)
 		rtl_hw_start_8168d(ioaddr, pdev);
 	break;
 
+	case RTL_GIGA_MAC_VER_28:
+		rtl_hw_start_8168d_4(ioaddr, pdev);
+	break;
+
 	default:
 		printk(KERN_ERR PFX "%s: unknown chipset (mac_version = %d).\n",
 			dev->name, tp->mac_version);
@@ -3808,7 +3742,7 @@ static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev)
 	};
 	u8 cfg1;
 
-	rtl_csi_access_enable(ioaddr);
+	rtl_csi_access_enable_2(ioaddr);
 
 	RTL_W8(DBG_REG, FIX_NAK_1);
 
@@ -3829,7 +3763,7 @@ static void rtl_hw_start_8102e_1(void __iomem *ioaddr, struct pci_dev *pdev)
 
 static void rtl_hw_start_8102e_2(void __iomem *ioaddr, struct pci_dev *pdev)
 {
-	rtl_csi_access_enable(ioaddr);
+	rtl_csi_access_enable_2(ioaddr);
 
 	rtl_tx_performance_tweak(pdev, 0x5 << MAX_READ_REQUEST_SHIFT);
 
@@ -3878,7 +3812,7 @@ static void rtl_hw_start_8101(struct net_device *dev)
 
 	RTL_W8(Cfg9346, Cfg9346_Unlock);
 
-	RTL_W8(EarlyTxThres, EarlyTxThld);
+	RTL_W8(MaxTxPacketSize, TxPacketMax);
 
 	rtl_set_rx_max_size(ioaddr, rx_buf_sz);
 
@@ -4179,7 +4113,7 @@ static void rtl8169_tx_timeout(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 
-	rtl8169_hw_reset(tp->mmio_addr);
+	rtl8169_hw_reset(tp);
 
 	/* Let's wait a bit while any (async) irq lands on */
 	rtl8169_schedule_work(dev, rtl8169_reset_task);
@@ -4337,7 +4271,6 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
 {
 	struct rtl8169_private *tp = netdev_priv(dev);
 	struct pci_dev *pdev = tp->pci_dev;
-	void __iomem *ioaddr = tp->mmio_addr;
 	u16 pci_status, pci_cmd;
 
 	pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
@@ -4368,13 +4301,15 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
 
 	/* The infamous DAC f*ckup only happens at boot time */
 	if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) {
+		void __iomem *ioaddr = tp->mmio_addr;
+
 		netif_info(tp, intr, dev, "disabling PCI DAC\n");
 		tp->cp_cmd &= ~PCIDAC;
 		RTL_W16(CPlusCmd, tp->cp_cmd);
 		dev->features &= ~NETIF_F_HIGHDMA;
 	}
 
-	rtl8169_hw_reset(ioaddr);
+	rtl8169_hw_reset(tp);
 
 	rtl8169_schedule_work(dev, rtl8169_reinit_task);
 }
@@ -4440,8 +4375,7 @@ static inline void rtl8169_rx_csum(struct sk_buff *skb, u32 opts1)
 	u32 status = opts1 & RxProtoMask;
 
 	if (((status == RxProtoTCP) && !(opts1 & TCPFail)) ||
-	    ((status == RxProtoUDP) && !(opts1 & UDPFail)) ||
-	    ((status == RxProtoIP) && !(opts1 & IPFail)))
+	    ((status == RxProtoUDP) && !(opts1 & UDPFail)))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 	else
 		skb_checksum_none_assert(skb);
@@ -4588,7 +4522,8 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 		}
 
 		/* Work around for rx fifo overflow */
-		if (unlikely(status & RxFIFOOver)) {
+		if (unlikely(status & RxFIFOOver) &&
+		(tp->mac_version == RTL_GIGA_MAC_VER_11)) {
 			netif_stop_queue(dev);
 			rtl8169_tx_timeout(dev);
 			break;
@@ -4600,7 +4535,7 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance)
 		}
 
 		if (status & LinkChg)
-			rtl8169_check_link_status(dev, tp, ioaddr);
+			__rtl8169_check_link_status(dev, tp, ioaddr, true);
 
 		/* We need to see the lastest version of tp->intr_mask to
 		 * avoid ignoring an MSI interrupt and having to wait for
@@ -4701,6 +4636,8 @@ static void rtl8169_down(struct net_device *dev)
 	rtl8169_tx_clear(tp);
 
 	rtl8169_rx_clear(tp);
+
+	rtl_pll_power_down(tp);
 }
 
 static int rtl8169_close(struct net_device *dev)
@@ -4805,9 +4742,13 @@ static struct net_device_stats *rtl8169_get_stats(struct net_device *dev)
 
 static void rtl8169_net_suspend(struct net_device *dev)
 {
+	struct rtl8169_private *tp = netdev_priv(dev);
+
 	if (!netif_running(dev))
 		return;
 
+	rtl_pll_power_down(tp);
+
 	netif_device_detach(dev);
 	netif_stop_queue(dev);
 }
@@ -4826,7 +4767,12 @@ static int rtl8169_suspend(struct device *device)
 
 static void __rtl8169_resume(struct net_device *dev)
 {
+	struct rtl8169_private *tp = netdev_priv(dev);
+
 	netif_device_attach(dev);
+
+	rtl_pll_power_up(tp);
+
 	rtl8169_schedule_work(dev, rtl8169_reset_task);
 }
 
@@ -4890,11 +4836,7 @@ static int rtl8169_runtime_idle(struct device *device)
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct rtl8169_private *tp = netdev_priv(dev);
 
-	if (!tp->TxDescArray)
-		return 0;
-
-	rtl8169_check_link_status(dev, tp, tp->mmio_addr);
-	return -EBUSY;
+	return tp->TxDescArray ? -EBUSY : 0;
 }
 
 static const struct dev_pm_ops rtl8169_pm_ops = {
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index ecc25aab896..39c17cecb8b 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -88,14 +88,14 @@
 #include "s2io.h"
 #include "s2io-regs.h"
 
-#define DRV_VERSION "2.0.26.27"
+#define DRV_VERSION "2.0.26.28"
 
 /* S2io Driver name & version. */
-static char s2io_driver_name[] = "Neterion";
-static char s2io_driver_version[] = DRV_VERSION;
+static const char s2io_driver_name[] = "Neterion";
+static const char s2io_driver_version[] = DRV_VERSION;
 
-static int rxd_size[2] = {32, 48};
-static int rxd_count[2] = {127, 85};
+static const int rxd_size[2] = {32, 48};
+static const int rxd_count[2] = {127, 85};
 
 static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
 {
@@ -3598,10 +3598,12 @@ static int s2io_set_swapper(struct s2io_nic *sp)
 	val64 = readq(&bar0->pif_rd_swapper_fb);
 	if (val64 != 0x0123456789ABCDEFULL) {
 		int i = 0;
-		u64 value[] = { 0xC30000C3C30000C3ULL,   /* FE=1, SE=1 */
-				0x8100008181000081ULL,  /* FE=1, SE=0 */
-				0x4200004242000042ULL,  /* FE=0, SE=1 */
-				0};                     /* FE=0, SE=0 */
+		static const u64 value[] = {
+			0xC30000C3C30000C3ULL,	/* FE=1, SE=1 */
+			0x8100008181000081ULL,	/* FE=1, SE=0 */
+			0x4200004242000042ULL,	/* FE=0, SE=1 */
+			0			/* FE=0, SE=0 */
+		};
 
 		while (i < 4) {
 			writeq(value[i], &bar0->swapper_ctrl);
@@ -3627,10 +3629,12 @@ static int s2io_set_swapper(struct s2io_nic *sp)
 
 	if (val64 != valt) {
 		int i = 0;
-		u64 value[] = { 0x00C3C30000C3C300ULL,  /* FE=1, SE=1 */
-				0x0081810000818100ULL,  /* FE=1, SE=0 */
-				0x0042420000424200ULL,  /* FE=0, SE=1 */
-				0};                     /* FE=0, SE=0 */
+		static const u64 value[] = {
+			0x00C3C30000C3C300ULL,	/* FE=1, SE=1 */
+			0x0081810000818100ULL,	/* FE=1, SE=0 */
+			0x0042420000424200ULL,	/* FE=0, SE=1 */
+			0			/* FE=0, SE=0 */
+		};
 
 		while (i < 4) {
 			writeq((value[i] | valr), &bar0->swapper_ctrl);
@@ -5568,30 +5572,27 @@ static void s2io_ethtool_gringparam(struct net_device *dev,
 	struct s2io_nic *sp = netdev_priv(dev);
 	int i, tx_desc_count = 0, rx_desc_count = 0;
 
-	if (sp->rxd_mode == RXD_MODE_1)
+	if (sp->rxd_mode == RXD_MODE_1) {
 		ering->rx_max_pending = MAX_RX_DESC_1;
-	else if (sp->rxd_mode == RXD_MODE_3B)
+		ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
+	} else {
 		ering->rx_max_pending = MAX_RX_DESC_2;
+		ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
+	}
 
+	ering->rx_mini_max_pending = 0;
 	ering->tx_max_pending = MAX_TX_DESC;
-	for (i = 0 ; i < sp->config.tx_fifo_num ; i++)
-		tx_desc_count += sp->config.tx_cfg[i].fifo_len;
 
-	DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds);
-	ering->tx_pending = tx_desc_count;
-	rx_desc_count = 0;
-	for (i = 0 ; i < sp->config.rx_ring_num ; i++)
+	for (i = 0; i < sp->config.rx_ring_num; i++)
 		rx_desc_count += sp->config.rx_cfg[i].num_rxd;
-
 	ering->rx_pending = rx_desc_count;
-
-	ering->rx_mini_max_pending = 0;
-	ering->rx_mini_pending = 0;
-	if (sp->rxd_mode == RXD_MODE_1)
-		ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
-	else if (sp->rxd_mode == RXD_MODE_3B)
-		ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
 	ering->rx_jumbo_pending = rx_desc_count;
+	ering->rx_mini_pending = 0;
+
+	for (i = 0; i < sp->config.tx_fifo_num; i++)
+		tx_desc_count += sp->config.tx_cfg[i].fifo_len;
+	ering->tx_pending = tx_desc_count;
+	DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds);
 }
 
 /**
@@ -7692,6 +7693,8 @@ static void s2io_init_pci(struct s2io_nic *sp)
 static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
 			    u8 *dev_multiq)
 {
+	int i;
+
 	if ((tx_fifo_num > MAX_TX_FIFOS) || (tx_fifo_num < 1)) {
 		DBG_PRINT(ERR_DBG, "Requested number of tx fifos "
 			  "(%d) not supported\n", tx_fifo_num);
@@ -7750,6 +7753,15 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
 		DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");
 		rx_ring_mode = 1;
 	}
+
+	for (i = 0; i < MAX_RX_RINGS; i++)
+		if (rx_ring_sz[i] > MAX_RX_BLOCKS_PER_RING) {
+			DBG_PRINT(ERR_DBG, "Requested rx ring size not "
+				  "supported\nDefaulting to %d\n",
+				  MAX_RX_BLOCKS_PER_RING);
+			rx_ring_sz[i] = MAX_RX_BLOCKS_PER_RING;
+		}
+
 	return SUCCESS;
 }
 
@@ -8321,8 +8333,7 @@ mem_alloc_failed:
 
 static void __devexit s2io_rem_nic(struct pci_dev *pdev)
 {
-	struct net_device *dev =
-		(struct net_device *)pci_get_drvdata(pdev);
+	struct net_device *dev = pci_get_drvdata(pdev);
 	struct s2io_nic *sp;
 
 	if (dev == NULL) {
@@ -8330,9 +8341,11 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev)
 		return;
 	}
 
-	flush_scheduled_work();
-
 	sp = netdev_priv(dev);
+
+	cancel_work_sync(&sp->rst_timer_task);
+	cancel_work_sync(&sp->set_link_task);
+
 	unregister_netdev(dev);
 
 	free_shared_mem(sp);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 00b8614efe4..7d160306b65 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -355,13 +355,12 @@ struct stat_block {
 #define FIFO_OTHER_MAX_NUM			1
 
 
-#define MAX_RX_DESC_1  (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 127 )
-#define MAX_RX_DESC_2  (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 )
-#define MAX_RX_DESC_3  (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 85 )
+#define MAX_RX_DESC_1  (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 128)
+#define MAX_RX_DESC_2  (MAX_RX_RINGS * MAX_RX_BLOCKS_PER_RING * 86)
 #define MAX_TX_DESC    (MAX_AVAILABLE_TXDS)
 
 /* FIFO mappings for all possible number of fifos configured */
-static int fifo_map[][MAX_TX_FIFOS] = {
+static const int fifo_map[][MAX_TX_FIFOS] = {
 	{0, 0, 0, 0, 0, 0, 0, 0},
 	{0, 0, 0, 0, 1, 1, 1, 1},
 	{0, 0, 0, 1, 1, 1, 2, 2},
@@ -372,7 +371,7 @@ static int fifo_map[][MAX_TX_FIFOS] = {
 	{0, 1, 2, 3, 4, 5, 6, 7},
 };
 
-static u16 fifo_selector[MAX_TX_FIFOS] = {0, 1, 3, 3, 7, 7, 7, 7};
+static const u16 fifo_selector[MAX_TX_FIFOS] = {0, 1, 3, 3, 7, 7, 7, 7};
 
 /* Maintains Per FIFO related information. */
 struct tx_fifo_config {
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 417adf37282..76290a8c3c1 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -1449,7 +1449,8 @@ static int __devinit sc92031_probe(struct pci_dev *pdev,
 	dev->irq = pdev->irq;
 
 	/* faked with skb_copy_and_csum_dev */
-	dev->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+	dev->features = NETIF_F_SG | NETIF_F_HIGHDMA |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 
 	dev->netdev_ops		= &sc92031_netdev_ops;
 	dev->watchdog_timeo	= TX_TIMEOUT;
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 05df20e4797..711449c6e67 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -23,7 +23,6 @@
 #include <linux/gfp.h>
 #include "net_driver.h"
 #include "efx.h"
-#include "mdio_10g.h"
 #include "nic.h"
 
 #include "mcdi.h"
@@ -197,7 +196,9 @@ MODULE_PARM_DESC(debug, "Bitmapped debugging message enable value");
 
 static void efx_remove_channels(struct efx_nic *efx);
 static void efx_remove_port(struct efx_nic *efx);
+static void efx_init_napi(struct efx_nic *efx);
 static void efx_fini_napi(struct efx_nic *efx);
+static void efx_fini_napi_channel(struct efx_channel *channel);
 static void efx_fini_struct(struct efx_nic *efx);
 static void efx_start_all(struct efx_nic *efx);
 static void efx_stop_all(struct efx_nic *efx);
@@ -335,8 +336,10 @@ void efx_process_channel_now(struct efx_channel *channel)
 
 	/* Disable interrupts and wait for ISRs to complete */
 	efx_nic_disable_interrupts(efx);
-	if (efx->legacy_irq)
+	if (efx->legacy_irq) {
 		synchronize_irq(efx->legacy_irq);
+		efx->legacy_irq_enabled = false;
+	}
 	if (channel->irq)
 		synchronize_irq(channel->irq);
 
@@ -351,6 +354,8 @@ void efx_process_channel_now(struct efx_channel *channel)
 	efx_channel_processed(channel);
 
 	napi_enable(&channel->napi_str);
+	if (efx->legacy_irq)
+		efx->legacy_irq_enabled = true;
 	efx_nic_enable_interrupts(efx);
 }
 
@@ -426,6 +431,7 @@ efx_alloc_channel(struct efx_nic *efx, int i, struct efx_channel *old_channel)
 
 		*channel = *old_channel;
 
+		channel->napi_dev = NULL;
 		memset(&channel->eventq, 0, sizeof(channel->eventq));
 
 		rx_queue = &channel->rx_queue;
@@ -455,9 +461,6 @@ efx_alloc_channel(struct efx_nic *efx, int i, struct efx_channel *old_channel)
 		}
 	}
 
-	spin_lock_init(&channel->tx_stop_lock);
-	atomic_set(&channel->tx_stop_count, 1);
-
 	rx_queue = &channel->rx_queue;
 	rx_queue->efx = efx;
 	setup_timer(&rx_queue->slow_fill, efx_rx_slow_fill,
@@ -736,9 +739,13 @@ efx_realloc_channels(struct efx_nic *efx, u32 rxq_entries, u32 txq_entries)
 	if (rc)
 		goto rollback;
 
+	efx_init_napi(efx);
+
 	/* Destroy old channels */
-	for (i = 0; i < efx->n_channels; i++)
+	for (i = 0; i < efx->n_channels; i++) {
+		efx_fini_napi_channel(other_channel[i]);
 		efx_remove_channel(other_channel[i]);
+	}
 out:
 	/* Free unused channel structures */
 	for (i = 0; i < efx->n_channels; i++)
@@ -910,6 +917,7 @@ static void efx_mac_work(struct work_struct *data)
 
 static int efx_probe_port(struct efx_nic *efx)
 {
+	unsigned char *perm_addr;
 	int rc;
 
 	netif_dbg(efx, probe, efx->net_dev, "create port\n");
@@ -923,11 +931,12 @@ static int efx_probe_port(struct efx_nic *efx)
 		return rc;
 
 	/* Sanity check MAC address */
-	if (is_valid_ether_addr(efx->mac_address)) {
-		memcpy(efx->net_dev->dev_addr, efx->mac_address, ETH_ALEN);
+	perm_addr = efx->net_dev->perm_addr;
+	if (is_valid_ether_addr(perm_addr)) {
+		memcpy(efx->net_dev->dev_addr, perm_addr, ETH_ALEN);
 	} else {
 		netif_err(efx, probe, efx->net_dev, "invalid MAC address %pM\n",
-			  efx->mac_address);
+			  perm_addr);
 		if (!allow_bad_hwaddr) {
 			rc = -EINVAL;
 			goto err;
@@ -1394,12 +1403,14 @@ static void efx_start_all(struct efx_nic *efx)
 	 * restart the transmit interface early so the watchdog timer stops */
 	efx_start_port(efx);
 
-	efx_for_each_channel(channel, efx) {
-		if (efx_dev_registered(efx))
-			efx_wake_queue(channel);
+	if (efx_dev_registered(efx))
+		netif_tx_wake_all_queues(efx->net_dev);
+
+	efx_for_each_channel(channel, efx)
 		efx_start_channel(channel);
-	}
 
+	if (efx->legacy_irq)
+		efx->legacy_irq_enabled = true;
 	efx_nic_enable_interrupts(efx);
 
 	/* Switch to event based MCDI completions after enabling interrupts.
@@ -1460,8 +1471,10 @@ static void efx_stop_all(struct efx_nic *efx)
 
 	/* Disable interrupts and wait for ISR to complete */
 	efx_nic_disable_interrupts(efx);
-	if (efx->legacy_irq)
+	if (efx->legacy_irq) {
 		synchronize_irq(efx->legacy_irq);
+		efx->legacy_irq_enabled = false;
+	}
 	efx_for_each_channel(channel, efx) {
 		if (channel->irq)
 			synchronize_irq(channel->irq);
@@ -1482,9 +1495,7 @@ static void efx_stop_all(struct efx_nic *efx)
 	/* Stop the kernel transmit interface late, so the watchdog
 	 * timer isn't ticking over the flush */
 	if (efx_dev_registered(efx)) {
-		struct efx_channel *channel;
-		efx_for_each_channel(channel, efx)
-			efx_stop_queue(channel);
+		netif_tx_stop_all_queues(efx->net_dev);
 		netif_tx_lock_bh(efx->net_dev);
 		netif_tx_unlock_bh(efx->net_dev);
 	}
@@ -1593,7 +1604,7 @@ static int efx_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd)
  *
  **************************************************************************/
 
-static int efx_init_napi(struct efx_nic *efx)
+static void efx_init_napi(struct efx_nic *efx)
 {
 	struct efx_channel *channel;
 
@@ -1602,18 +1613,21 @@ static int efx_init_napi(struct efx_nic *efx)
 		netif_napi_add(channel->napi_dev, &channel->napi_str,
 			       efx_poll, napi_weight);
 	}
-	return 0;
+}
+
+static void efx_fini_napi_channel(struct efx_channel *channel)
+{
+	if (channel->napi_dev)
+		netif_napi_del(&channel->napi_str);
+	channel->napi_dev = NULL;
 }
 
 static void efx_fini_napi(struct efx_nic *efx)
 {
 	struct efx_channel *channel;
 
-	efx_for_each_channel(channel, efx) {
-		if (channel->napi_dev)
-			netif_napi_del(&channel->napi_str);
-		channel->napi_dev = NULL;
-	}
+	efx_for_each_channel(channel, efx)
+		efx_fini_napi_channel(channel);
 }
 
 /**************************************************************************
@@ -1877,6 +1891,7 @@ static DEVICE_ATTR(phy_type, 0644, show_phy_type, NULL);
 static int efx_register_netdev(struct efx_nic *efx)
 {
 	struct net_device *net_dev = efx->net_dev;
+	struct efx_channel *channel;
 	int rc;
 
 	net_dev->watchdog_timeo = 5 * HZ;
@@ -1899,6 +1914,14 @@ static int efx_register_netdev(struct efx_nic *efx)
 	if (rc)
 		goto fail_locked;
 
+	efx_for_each_channel(channel, efx) {
+		struct efx_tx_queue *tx_queue;
+		efx_for_each_channel_tx_queue(tx_queue, channel) {
+			tx_queue->core_txq = netdev_get_tx_queue(
+				efx->net_dev, tx_queue->queue / EFX_TXQ_TYPES);
+		}
+	}
+
 	/* Always start with carrier off; PHY events will detect the link */
 	netif_carrier_off(efx->net_dev);
 
@@ -1962,7 +1985,6 @@ void efx_reset_down(struct efx_nic *efx, enum reset_type method)
 
 	efx_stop_all(efx);
 	mutex_lock(&efx->mac_lock);
-	mutex_lock(&efx->spi_lock);
 
 	efx_fini_channels(efx);
 	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE)
@@ -2004,7 +2026,6 @@ int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok)
 	efx_init_channels(efx);
 	efx_restore_filters(efx);
 
-	mutex_unlock(&efx->spi_lock);
 	mutex_unlock(&efx->mac_lock);
 
 	efx_start_all(efx);
@@ -2014,7 +2035,6 @@ int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok)
 fail:
 	efx->port_initialized = false;
 
-	mutex_unlock(&efx->spi_lock);
 	mutex_unlock(&efx->mac_lock);
 
 	return rc;
@@ -2202,8 +2222,6 @@ static int efx_init_struct(struct efx_nic *efx, struct efx_nic_type *type,
 	/* Initialise common structures */
 	memset(efx, 0, sizeof(*efx));
 	spin_lock_init(&efx->biu_lock);
-	mutex_init(&efx->mdio_lock);
-	mutex_init(&efx->spi_lock);
 #ifdef CONFIG_SFC_MTD
 	INIT_LIST_HEAD(&efx->mtd_list);
 #endif
@@ -2335,9 +2353,7 @@ static int efx_pci_probe_main(struct efx_nic *efx)
 	if (rc)
 		goto fail1;
 
-	rc = efx_init_napi(efx);
-	if (rc)
-		goto fail2;
+	efx_init_napi(efx);
 
 	rc = efx->type->init(efx);
 	if (rc) {
@@ -2368,7 +2384,6 @@ static int efx_pci_probe_main(struct efx_nic *efx)
 	efx->type->fini(efx);
  fail3:
 	efx_fini_napi(efx);
- fail2:
 	efx_remove_all(efx);
  fail1:
 	return rc;
diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h
index 10a1bf40da9..d43a7e5212b 100644
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -36,8 +36,6 @@ efx_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev);
 extern netdev_tx_t
 efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb);
 extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index);
-extern void efx_stop_queue(struct efx_channel *channel);
-extern void efx_wake_queue(struct efx_channel *channel);
 
 /* RX */
 extern int efx_probe_rx_queue(struct efx_rx_queue *rx_queue);
@@ -74,9 +72,8 @@ extern int efx_filter_insert_filter(struct efx_nic *efx,
 				    bool replace);
 extern int efx_filter_remove_filter(struct efx_nic *efx,
 				    struct efx_filter_spec *spec);
-extern void efx_filter_table_clear(struct efx_nic *efx,
-				   enum efx_filter_table_id table_id,
-				   enum efx_filter_priority priority);
+extern void efx_filter_clear_rx(struct efx_nic *efx,
+				enum efx_filter_priority priority);
 
 /* Channels */
 extern void efx_process_channel_now(struct efx_channel *channel);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index edb9d16b8b4..0e8bb19ed60 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -11,14 +11,13 @@
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
 #include <linux/rtnetlink.h>
+#include <linux/in.h>
 #include "net_driver.h"
 #include "workarounds.h"
 #include "selftest.h"
 #include "efx.h"
 #include "filter.h"
 #include "nic.h"
-#include "spi.h"
-#include "mdio_10g.h"
 
 struct ethtool_string {
 	char name[ETH_GSTRING_LEN];
@@ -560,12 +559,8 @@ static int efx_ethtool_set_flags(struct net_device *net_dev, u32 data)
 	if (rc)
 		return rc;
 
-	if (!(data & ETH_FLAG_NTUPLE)) {
-		efx_filter_table_clear(efx, EFX_FILTER_TABLE_RX_IP,
-				       EFX_FILTER_PRI_MANUAL);
-		efx_filter_table_clear(efx, EFX_FILTER_TABLE_RX_MAC,
-				       EFX_FILTER_PRI_MANUAL);
-	}
+	if (!(data & ETH_FLAG_NTUPLE))
+		efx_filter_clear_rx(efx, EFX_FILTER_PRI_MANUAL);
 
 	return 0;
 }
@@ -584,6 +579,9 @@ static void efx_ethtool_self_test(struct net_device *net_dev,
 		goto fail1;
 	}
 
+	netif_info(efx, drv, efx->net_dev, "starting %sline testing\n",
+		   (test->flags & ETH_TEST_FL_OFFLINE) ? "off" : "on");
+
 	/* We need rx buffers and interrupts. */
 	already_up = (efx->net_dev->flags & IFF_UP);
 	if (!already_up) {
@@ -602,9 +600,9 @@ static void efx_ethtool_self_test(struct net_device *net_dev,
 	if (!already_up)
 		dev_close(efx->net_dev);
 
-	netif_dbg(efx, drv, efx->net_dev, "%s %sline self-tests\n",
-		  rc == 0 ? "passed" : "failed",
-		  (test->flags & ETH_TEST_FL_OFFLINE) ? "off" : "on");
+	netif_info(efx, drv, efx->net_dev, "%s %sline self-tests\n",
+		   rc == 0 ? "passed" : "failed",
+		   (test->flags & ETH_TEST_FL_OFFLINE) ? "off" : "on");
 
  fail2:
  fail1:
@@ -622,68 +620,6 @@ static int efx_ethtool_nway_reset(struct net_device *net_dev)
 	return mdio45_nway_restart(&efx->mdio);
 }
 
-static u32 efx_ethtool_get_link(struct net_device *net_dev)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-
-	return efx->link_state.up;
-}
-
-static int efx_ethtool_get_eeprom_len(struct net_device *net_dev)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-	struct efx_spi_device *spi = efx->spi_eeprom;
-
-	if (!spi)
-		return 0;
-	return min(spi->size, EFX_EEPROM_BOOTCONFIG_END) -
-		min(spi->size, EFX_EEPROM_BOOTCONFIG_START);
-}
-
-static int efx_ethtool_get_eeprom(struct net_device *net_dev,
-				  struct ethtool_eeprom *eeprom, u8 *buf)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-	struct efx_spi_device *spi = efx->spi_eeprom;
-	size_t len;
-	int rc;
-
-	rc = mutex_lock_interruptible(&efx->spi_lock);
-	if (rc)
-		return rc;
-	rc = falcon_spi_read(efx, spi,
-			     eeprom->offset + EFX_EEPROM_BOOTCONFIG_START,
-			     eeprom->len, &len, buf);
-	mutex_unlock(&efx->spi_lock);
-
-	eeprom->magic = EFX_ETHTOOL_EEPROM_MAGIC;
-	eeprom->len = len;
-	return rc;
-}
-
-static int efx_ethtool_set_eeprom(struct net_device *net_dev,
-				  struct ethtool_eeprom *eeprom, u8 *buf)
-{
-	struct efx_nic *efx = netdev_priv(net_dev);
-	struct efx_spi_device *spi = efx->spi_eeprom;
-	size_t len;
-	int rc;
-
-	if (eeprom->magic != EFX_ETHTOOL_EEPROM_MAGIC)
-		return -EINVAL;
-
-	rc = mutex_lock_interruptible(&efx->spi_lock);
-	if (rc)
-		return rc;
-	rc = falcon_spi_write(efx, spi,
-			      eeprom->offset + EFX_EEPROM_BOOTCONFIG_START,
-			      eeprom->len, &len, buf);
-	mutex_unlock(&efx->spi_lock);
-
-	eeprom->len = len;
-	return rc;
-}
-
 static int efx_ethtool_get_coalesce(struct net_device *net_dev,
 				    struct ethtool_coalesce *coalesce)
 {
@@ -978,6 +914,7 @@ static int efx_ethtool_set_rx_ntuple(struct net_device *net_dev,
 	struct ethhdr *mac_entry = &ntuple->fs.h_u.ether_spec;
 	struct ethhdr *mac_mask = &ntuple->fs.m_u.ether_spec;
 	struct efx_filter_spec filter;
+	int rc;
 
 	/* Range-check action */
 	if (ntuple->fs.action < ETHTOOL_RXNTUPLE_ACTION_CLEAR ||
@@ -987,9 +924,16 @@ static int efx_ethtool_set_rx_ntuple(struct net_device *net_dev,
 	if (~ntuple->fs.data_mask)
 		return -EINVAL;
 
+	efx_filter_init_rx(&filter, EFX_FILTER_PRI_MANUAL, 0,
+			   (ntuple->fs.action == ETHTOOL_RXNTUPLE_ACTION_DROP) ?
+			   0xfff : ntuple->fs.action);
+
 	switch (ntuple->fs.flow_type) {
 	case TCP_V4_FLOW:
-	case UDP_V4_FLOW:
+	case UDP_V4_FLOW: {
+		u8 proto = (ntuple->fs.flow_type == TCP_V4_FLOW ?
+			    IPPROTO_TCP : IPPROTO_UDP);
+
 		/* Must match all of destination, */
 		if (ip_mask->ip4dst | ip_mask->pdst)
 			return -EINVAL;
@@ -1001,7 +945,22 @@ static int efx_ethtool_set_rx_ntuple(struct net_device *net_dev,
 		/* and nothing else */
 		if ((u8)~ip_mask->tos | (u16)~ntuple->fs.vlan_tag_mask)
 			return -EINVAL;
+
+		if (!ip_mask->ip4src)
+			rc = efx_filter_set_ipv4_full(&filter, proto,
+						      ip_entry->ip4dst,
+						      ip_entry->pdst,
+						      ip_entry->ip4src,
+						      ip_entry->psrc);
+		else
+			rc = efx_filter_set_ipv4_local(&filter, proto,
+						       ip_entry->ip4dst,
+						       ip_entry->pdst);
+		if (rc)
+			return rc;
 		break;
+	}
+
 	case ETHER_FLOW:
 		/* Must match all of destination, */
 		if (!is_zero_ether_addr(mac_mask->h_dest))
@@ -1014,58 +973,24 @@ static int efx_ethtool_set_rx_ntuple(struct net_device *net_dev,
 		if (!is_broadcast_ether_addr(mac_mask->h_source) ||
 		    mac_mask->h_proto != htons(0xffff))
 			return -EINVAL;
+
+		rc = efx_filter_set_eth_local(
+			&filter,
+			(ntuple->fs.vlan_tag_mask == 0xf000) ?
+			ntuple->fs.vlan_tag : EFX_FILTER_VID_UNSPEC,
+			mac_entry->h_dest);
+		if (rc)
+			return rc;
 		break;
+
 	default:
 		return -EINVAL;
 	}
 
-	filter.priority = EFX_FILTER_PRI_MANUAL;
-	filter.flags = 0;
-
-	switch (ntuple->fs.flow_type) {
-	case TCP_V4_FLOW:
-		if (!ip_mask->ip4src)
-			efx_filter_set_rx_tcp_full(&filter,
-						   htonl(ip_entry->ip4src),
-						   htons(ip_entry->psrc),
-						   htonl(ip_entry->ip4dst),
-						   htons(ip_entry->pdst));
-		else
-			efx_filter_set_rx_tcp_wild(&filter,
-						   htonl(ip_entry->ip4dst),
-						   htons(ip_entry->pdst));
-		break;
-	case UDP_V4_FLOW:
-		if (!ip_mask->ip4src)
-			efx_filter_set_rx_udp_full(&filter,
-						   htonl(ip_entry->ip4src),
-						   htons(ip_entry->psrc),
-						   htonl(ip_entry->ip4dst),
-						   htons(ip_entry->pdst));
-		else
-			efx_filter_set_rx_udp_wild(&filter,
-						   htonl(ip_entry->ip4dst),
-						   htons(ip_entry->pdst));
-		break;
-	case ETHER_FLOW:
-		if (ntuple->fs.vlan_tag_mask == 0xf000)
-			efx_filter_set_rx_mac_full(&filter,
-						   ntuple->fs.vlan_tag & 0xfff,
-						   mac_entry->h_dest);
-		else
-			efx_filter_set_rx_mac_wild(&filter, mac_entry->h_dest);
-		break;
-	}
-
-	if (ntuple->fs.action == ETHTOOL_RXNTUPLE_ACTION_CLEAR) {
+	if (ntuple->fs.action == ETHTOOL_RXNTUPLE_ACTION_CLEAR)
 		return efx_filter_remove_filter(efx, &filter);
-	} else {
-		if (ntuple->fs.action == ETHTOOL_RXNTUPLE_ACTION_DROP)
-			filter.dmaq_id = 0xfff;
-		else
-			filter.dmaq_id = ntuple->fs.action;
+	else
 		return efx_filter_insert_filter(efx, &filter, true);
-	}
 }
 
 static int efx_ethtool_get_rxfh_indir(struct net_device *net_dev,
@@ -1115,10 +1040,7 @@ const struct ethtool_ops efx_ethtool_ops = {
 	.get_msglevel		= efx_ethtool_get_msglevel,
 	.set_msglevel		= efx_ethtool_set_msglevel,
 	.nway_reset		= efx_ethtool_nway_reset,
-	.get_link		= efx_ethtool_get_link,
-	.get_eeprom_len		= efx_ethtool_get_eeprom_len,
-	.get_eeprom		= efx_ethtool_get_eeprom,
-	.set_eeprom		= efx_ethtool_set_eeprom,
+	.get_link		= ethtool_op_get_link,
 	.get_coalesce		= efx_ethtool_get_coalesce,
 	.set_coalesce		= efx_ethtool_set_coalesce,
 	.get_ringparam		= efx_ethtool_get_ringparam,
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 267019bb2b1..70e4f7dcce8 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -24,7 +24,6 @@
 #include "nic.h"
 #include "regs.h"
 #include "io.h"
-#include "mdio_10g.h"
 #include "phy.h"
 #include "workarounds.h"
 
@@ -255,7 +254,6 @@ int falcon_spi_cmd(struct efx_nic *efx, const struct efx_spi_device *spi,
 	/* Input validation */
 	if (len > FALCON_SPI_MAX_LEN)
 		return -EINVAL;
-	BUG_ON(!mutex_is_locked(&efx->spi_lock));
 
 	/* Check that previous command is not still running */
 	rc = falcon_spi_poll(efx);
@@ -719,6 +717,7 @@ static int falcon_mdio_write(struct net_device *net_dev,
 			     int prtad, int devad, u16 addr, u16 value)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	efx_oword_t reg;
 	int rc;
 
@@ -726,7 +725,7 @@ static int falcon_mdio_write(struct net_device *net_dev,
 		   "writing MDIO %d register %d.%d with 0x%04x\n",
 		    prtad, devad, addr, value);
 
-	mutex_lock(&efx->mdio_lock);
+	mutex_lock(&nic_data->mdio_lock);
 
 	/* Check MDIO not currently being accessed */
 	rc = falcon_gmii_wait(efx);
@@ -762,7 +761,7 @@ static int falcon_mdio_write(struct net_device *net_dev,
 	}
 
 out:
-	mutex_unlock(&efx->mdio_lock);
+	mutex_unlock(&nic_data->mdio_lock);
 	return rc;
 }
 
@@ -771,10 +770,11 @@ static int falcon_mdio_read(struct net_device *net_dev,
 			    int prtad, int devad, u16 addr)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	efx_oword_t reg;
 	int rc;
 
-	mutex_lock(&efx->mdio_lock);
+	mutex_lock(&nic_data->mdio_lock);
 
 	/* Check MDIO not currently being accessed */
 	rc = falcon_gmii_wait(efx);
@@ -813,7 +813,7 @@ static int falcon_mdio_read(struct net_device *net_dev,
 	}
 
 out:
-	mutex_unlock(&efx->mdio_lock);
+	mutex_unlock(&nic_data->mdio_lock);
 	return rc;
 }
 
@@ -841,6 +841,7 @@ static int falcon_probe_port(struct efx_nic *efx)
 	}
 
 	/* Fill out MDIO structure and loopback modes */
+	mutex_init(&nic_data->mdio_lock);
 	efx->mdio.mdio_read = falcon_mdio_read;
 	efx->mdio.mdio_write = falcon_mdio_write;
 	rc = efx->phy_op->probe(efx);
@@ -880,6 +881,41 @@ static void falcon_remove_port(struct efx_nic *efx)
 	efx_nic_free_buffer(efx, &efx->stats_buffer);
 }
 
+/* Global events are basically PHY events */
+static bool
+falcon_handle_global_event(struct efx_channel *channel, efx_qword_t *event)
+{
+	struct efx_nic *efx = channel->efx;
+	struct falcon_nic_data *nic_data = efx->nic_data;
+
+	if (EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_G_PHY0_INTR) ||
+	    EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_XG_PHY0_INTR) ||
+	    EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_XFP_PHY0_INTR))
+		/* Ignored */
+		return true;
+
+	if ((efx_nic_rev(efx) == EFX_REV_FALCON_B0) &&
+	    EFX_QWORD_FIELD(*event, FSF_BB_GLB_EV_XG_MGT_INTR)) {
+		nic_data->xmac_poll_required = true;
+		return true;
+	}
+
+	if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1 ?
+	    EFX_QWORD_FIELD(*event, FSF_AA_GLB_EV_RX_RECOVERY) :
+	    EFX_QWORD_FIELD(*event, FSF_BB_GLB_EV_RX_RECOVERY)) {
+		netif_err(efx, rx_err, efx->net_dev,
+			  "channel %d seen global RX_RESET event. Resetting.\n",
+			  channel->channel);
+
+		atomic_inc(&efx->rx_reset);
+		efx_schedule_reset(efx, EFX_WORKAROUND_6555(efx) ?
+				   RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE);
+		return true;
+	}
+
+	return false;
+}
+
 /**************************************************************************
  *
  * Falcon test code
@@ -889,6 +925,7 @@ static void falcon_remove_port(struct efx_nic *efx)
 static int
 falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out)
 {
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	struct falcon_nvconfig *nvconfig;
 	struct efx_spi_device *spi;
 	void *region;
@@ -896,8 +933,11 @@ falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out)
 	__le16 *word, *limit;
 	u32 csum;
 
-	spi = efx->spi_flash ? efx->spi_flash : efx->spi_eeprom;
-	if (!spi)
+	if (efx_spi_present(&nic_data->spi_flash))
+		spi = &nic_data->spi_flash;
+	else if (efx_spi_present(&nic_data->spi_eeprom))
+		spi = &nic_data->spi_eeprom;
+	else
 		return -EINVAL;
 
 	region = kmalloc(FALCON_NVCONFIG_END, GFP_KERNEL);
@@ -905,12 +945,13 @@ falcon_read_nvram(struct efx_nic *efx, struct falcon_nvconfig *nvconfig_out)
 		return -ENOMEM;
 	nvconfig = region + FALCON_NVCONFIG_OFFSET;
 
-	mutex_lock(&efx->spi_lock);
+	mutex_lock(&nic_data->spi_lock);
 	rc = falcon_spi_read(efx, spi, 0, FALCON_NVCONFIG_END, NULL, region);
-	mutex_unlock(&efx->spi_lock);
+	mutex_unlock(&nic_data->spi_lock);
 	if (rc) {
 		netif_err(efx, hw, efx->net_dev, "Failed to read %s\n",
-			  efx->spi_flash ? "flash" : "EEPROM");
+			  efx_spi_present(&nic_data->spi_flash) ?
+			  "flash" : "EEPROM");
 		rc = -EIO;
 		goto out;
 	}
@@ -1012,7 +1053,7 @@ static int falcon_b0_test_registers(struct efx_nic *efx)
 
 /* Resets NIC to known state.  This routine must be called in process
  * context and is allowed to sleep. */
-static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method)
+static int __falcon_reset_hw(struct efx_nic *efx, enum reset_type method)
 {
 	struct falcon_nic_data *nic_data = efx->nic_data;
 	efx_oword_t glb_ctl_reg_ker;
@@ -1108,6 +1149,18 @@ fail5:
 	return rc;
 }
 
+static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method)
+{
+	struct falcon_nic_data *nic_data = efx->nic_data;
+	int rc;
+
+	mutex_lock(&nic_data->spi_lock);
+	rc = __falcon_reset_hw(efx, method);
+	mutex_unlock(&nic_data->spi_lock);
+
+	return rc;
+}
+
 static void falcon_monitor(struct efx_nic *efx)
 {
 	bool link_changed;
@@ -1189,16 +1242,11 @@ static int falcon_reset_sram(struct efx_nic *efx)
 	return -ETIMEDOUT;
 }
 
-static int falcon_spi_device_init(struct efx_nic *efx,
-				  struct efx_spi_device **spi_device_ret,
+static void falcon_spi_device_init(struct efx_nic *efx,
+				  struct efx_spi_device *spi_device,
 				  unsigned int device_id, u32 device_type)
 {
-	struct efx_spi_device *spi_device;
-
 	if (device_type != 0) {
-		spi_device = kzalloc(sizeof(*spi_device), GFP_KERNEL);
-		if (!spi_device)
-			return -ENOMEM;
 		spi_device->device_id = device_id;
 		spi_device->size =
 			1 << SPI_DEV_TYPE_FIELD(device_type, SPI_DEV_TYPE_SIZE);
@@ -1215,27 +1263,15 @@ static int falcon_spi_device_init(struct efx_nic *efx,
 			1 << SPI_DEV_TYPE_FIELD(device_type,
 						SPI_DEV_TYPE_BLOCK_SIZE);
 	} else {
-		spi_device = NULL;
+		spi_device->size = 0;
 	}
-
-	kfree(*spi_device_ret);
-	*spi_device_ret = spi_device;
-	return 0;
-}
-
-static void falcon_remove_spi_devices(struct efx_nic *efx)
-{
-	kfree(efx->spi_eeprom);
-	efx->spi_eeprom = NULL;
-	kfree(efx->spi_flash);
-	efx->spi_flash = NULL;
 }
 
 /* Extract non-volatile configuration */
 static int falcon_probe_nvconfig(struct efx_nic *efx)
 {
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	struct falcon_nvconfig *nvconfig;
-	int board_rev;
 	int rc;
 
 	nvconfig = kmalloc(sizeof(*nvconfig), GFP_KERNEL);
@@ -1243,55 +1279,32 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
 		return -ENOMEM;
 
 	rc = falcon_read_nvram(efx, nvconfig);
-	if (rc == -EINVAL) {
-		netif_err(efx, probe, efx->net_dev,
-			  "NVRAM is invalid therefore using defaults\n");
-		efx->phy_type = PHY_TYPE_NONE;
-		efx->mdio.prtad = MDIO_PRTAD_NONE;
-		board_rev = 0;
-		rc = 0;
-	} else if (rc) {
-		goto fail1;
-	} else {
-		struct falcon_nvconfig_board_v2 *v2 = &nvconfig->board_v2;
-		struct falcon_nvconfig_board_v3 *v3 = &nvconfig->board_v3;
-
-		efx->phy_type = v2->port0_phy_type;
-		efx->mdio.prtad = v2->port0_phy_addr;
-		board_rev = le16_to_cpu(v2->board_revision);
-
-		if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) {
-			rc = falcon_spi_device_init(
-				efx, &efx->spi_flash, FFE_AB_SPI_DEVICE_FLASH,
-				le32_to_cpu(v3->spi_device_type
-					    [FFE_AB_SPI_DEVICE_FLASH]));
-			if (rc)
-				goto fail2;
-			rc = falcon_spi_device_init(
-				efx, &efx->spi_eeprom, FFE_AB_SPI_DEVICE_EEPROM,
-				le32_to_cpu(v3->spi_device_type
-					    [FFE_AB_SPI_DEVICE_EEPROM]));
-			if (rc)
-				goto fail2;
-		}
+	if (rc)
+		goto out;
+
+	efx->phy_type = nvconfig->board_v2.port0_phy_type;
+	efx->mdio.prtad = nvconfig->board_v2.port0_phy_addr;
+
+	if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) {
+		falcon_spi_device_init(
+			efx, &nic_data->spi_flash, FFE_AB_SPI_DEVICE_FLASH,
+			le32_to_cpu(nvconfig->board_v3
+				    .spi_device_type[FFE_AB_SPI_DEVICE_FLASH]));
+		falcon_spi_device_init(
+			efx, &nic_data->spi_eeprom, FFE_AB_SPI_DEVICE_EEPROM,
+			le32_to_cpu(nvconfig->board_v3
+				    .spi_device_type[FFE_AB_SPI_DEVICE_EEPROM]));
 	}
 
 	/* Read the MAC addresses */
-	memcpy(efx->mac_address, nvconfig->mac_address[0], ETH_ALEN);
+	memcpy(efx->net_dev->perm_addr, nvconfig->mac_address[0], ETH_ALEN);
 
 	netif_dbg(efx, probe, efx->net_dev, "PHY is %d phy_id %d\n",
 		  efx->phy_type, efx->mdio.prtad);
 
-	rc = falcon_probe_board(efx, board_rev);
-	if (rc)
-		goto fail2;
-
-	kfree(nvconfig);
-	return 0;
-
- fail2:
-	falcon_remove_spi_devices(efx);
- fail1:
+	rc = falcon_probe_board(efx,
+				le16_to_cpu(nvconfig->board_v2.board_revision));
+out:
 	kfree(nvconfig);
 	return rc;
 }
@@ -1299,6 +1312,7 @@ static int falcon_probe_nvconfig(struct efx_nic *efx)
 /* Probe all SPI devices on the NIC */
 static void falcon_probe_spi_devices(struct efx_nic *efx)
 {
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	efx_oword_t nic_stat, gpio_ctl, ee_vpd_cfg;
 	int boot_dev;
 
@@ -1327,12 +1341,14 @@ static void falcon_probe_spi_devices(struct efx_nic *efx)
 		efx_writeo(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0);
 	}
 
+	mutex_init(&nic_data->spi_lock);
+
 	if (boot_dev == FFE_AB_SPI_DEVICE_FLASH)
-		falcon_spi_device_init(efx, &efx->spi_flash,
+		falcon_spi_device_init(efx, &nic_data->spi_flash,
 				       FFE_AB_SPI_DEVICE_FLASH,
 				       default_flash_type);
 	if (boot_dev == FFE_AB_SPI_DEVICE_EEPROM)
-		falcon_spi_device_init(efx, &efx->spi_eeprom,
+		falcon_spi_device_init(efx, &nic_data->spi_eeprom,
 				       FFE_AB_SPI_DEVICE_EEPROM,
 				       large_eeprom_type);
 }
@@ -1397,7 +1413,7 @@ static int falcon_probe_nic(struct efx_nic *efx)
 	}
 
 	/* Now we can reset the NIC */
-	rc = falcon_reset_hw(efx, RESET_TYPE_ALL);
+	rc = __falcon_reset_hw(efx, RESET_TYPE_ALL);
 	if (rc) {
 		netif_err(efx, probe, efx->net_dev, "failed to reset NIC\n");
 		goto fail3;
@@ -1419,8 +1435,11 @@ static int falcon_probe_nic(struct efx_nic *efx)
 
 	/* Read in the non-volatile configuration */
 	rc = falcon_probe_nvconfig(efx);
-	if (rc)
+	if (rc) {
+		if (rc == -EINVAL)
+			netif_err(efx, probe, efx->net_dev, "NVRAM is invalid\n");
 		goto fail5;
+	}
 
 	/* Initialise I2C adapter */
 	board = falcon_board(efx);
@@ -1452,7 +1471,6 @@ static int falcon_probe_nic(struct efx_nic *efx)
 	BUG_ON(i2c_del_adapter(&board->i2c_adap));
 	memset(&board->i2c_adap, 0, sizeof(board->i2c_adap));
  fail5:
-	falcon_remove_spi_devices(efx);
 	efx_nic_free_buffer(efx, &efx->irq_status);
  fail4:
  fail3:
@@ -1606,10 +1624,9 @@ static void falcon_remove_nic(struct efx_nic *efx)
 	BUG_ON(rc);
 	memset(&board->i2c_adap, 0, sizeof(board->i2c_adap));
 
-	falcon_remove_spi_devices(efx);
 	efx_nic_free_buffer(efx, &efx->irq_status);
 
-	falcon_reset_hw(efx, RESET_TYPE_ALL);
+	__falcon_reset_hw(efx, RESET_TYPE_ALL);
 
 	/* Release the second function after the reset */
 	if (nic_data->pci_dev2) {
@@ -1720,6 +1737,7 @@ struct efx_nic_type falcon_a1_nic_type = {
 	.reset = falcon_reset_hw,
 	.probe_port = falcon_probe_port,
 	.remove_port = falcon_remove_port,
+	.handle_global_event = falcon_handle_global_event,
 	.prepare_flush = falcon_prepare_flush,
 	.update_stats = falcon_update_nic_stats,
 	.start_stats = falcon_start_nic_stats,
@@ -1760,6 +1778,7 @@ struct efx_nic_type falcon_b0_nic_type = {
 	.reset = falcon_reset_hw,
 	.probe_port = falcon_probe_port,
 	.remove_port = falcon_remove_port,
+	.handle_global_event = falcon_handle_global_event,
 	.prepare_flush = falcon_prepare_flush,
 	.update_stats = falcon_update_nic_stats,
 	.start_stats = falcon_start_nic_stats,
diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c
index cfc6a5b5a47..2dd16f0b3ce 100644
--- a/drivers/net/sfc/falcon_boards.c
+++ b/drivers/net/sfc/falcon_boards.c
@@ -13,8 +13,6 @@
 #include "phy.h"
 #include "efx.h"
 #include "nic.h"
-#include "regs.h"
-#include "io.h"
 #include "workarounds.h"
 
 /* Macros for unpacking the board revision */
@@ -30,17 +28,28 @@
 #define FALCON_BOARD_SFN4112F 0x52
 
 /* Board temperature is about 15°C above ambient when air flow is
- * limited. */
+ * limited.  The maximum acceptable ambient temperature varies
+ * depending on the PHY specifications but the critical temperature
+ * above which we should shut down to avoid damage is 80°C. */
 #define FALCON_BOARD_TEMP_BIAS	15
+#define FALCON_BOARD_TEMP_CRIT	(80 + FALCON_BOARD_TEMP_BIAS)
 
 /* SFC4000 datasheet says: 'The maximum permitted junction temperature
  * is 125°C; the thermal design of the environment for the SFC4000
  * should aim to keep this well below 100°C.' */
+#define FALCON_JUNC_TEMP_MIN	0
 #define FALCON_JUNC_TEMP_MAX	90
+#define FALCON_JUNC_TEMP_CRIT	125
 
 /*****************************************************************************
  * Support for LM87 sensor chip used on several boards
  */
+#define LM87_REG_TEMP_HW_INT_LOCK	0x13
+#define LM87_REG_TEMP_HW_EXT_LOCK	0x14
+#define LM87_REG_TEMP_HW_INT		0x17
+#define LM87_REG_TEMP_HW_EXT		0x18
+#define LM87_REG_TEMP_EXT1		0x26
+#define LM87_REG_TEMP_INT		0x27
 #define LM87_REG_ALARMS1		0x41
 #define LM87_REG_ALARMS2		0x42
 #define LM87_IN_LIMITS(nr, _min, _max)			\
@@ -57,6 +66,27 @@
 
 #if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE)
 
+static int efx_poke_lm87(struct i2c_client *client, const u8 *reg_values)
+{
+	while (*reg_values) {
+		u8 reg = *reg_values++;
+		u8 value = *reg_values++;
+		int rc = i2c_smbus_write_byte_data(client, reg, value);
+		if (rc)
+			return rc;
+	}
+	return 0;
+}
+
+static const u8 falcon_lm87_common_regs[] = {
+	LM87_REG_TEMP_HW_INT_LOCK, FALCON_BOARD_TEMP_CRIT,
+	LM87_REG_TEMP_HW_INT, FALCON_BOARD_TEMP_CRIT,
+	LM87_TEMP_EXT1_LIMITS(FALCON_JUNC_TEMP_MIN, FALCON_JUNC_TEMP_MAX),
+	LM87_REG_TEMP_HW_EXT_LOCK, FALCON_JUNC_TEMP_CRIT,
+	LM87_REG_TEMP_HW_EXT, FALCON_JUNC_TEMP_CRIT,
+	0
+};
+
 static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
 			 const u8 *reg_values)
 {
@@ -67,13 +97,16 @@ static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
 	if (!client)
 		return -EIO;
 
-	while (*reg_values) {
-		u8 reg = *reg_values++;
-		u8 value = *reg_values++;
-		rc = i2c_smbus_write_byte_data(client, reg, value);
-		if (rc)
-			goto err;
-	}
+	/* Read-to-clear alarm/interrupt status */
+	i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
+	i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
+
+	rc = efx_poke_lm87(client, reg_values);
+	if (rc)
+		goto err;
+	rc = efx_poke_lm87(client, falcon_lm87_common_regs);
+	if (rc)
+		goto err;
 
 	board->hwmon_client = client;
 	return 0;
@@ -91,36 +124,56 @@ static void efx_fini_lm87(struct efx_nic *efx)
 static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
 {
 	struct i2c_client *client = falcon_board(efx)->hwmon_client;
-	s32 alarms1, alarms2;
+	bool temp_crit, elec_fault, is_failure;
+	u16 alarms;
+	s32 reg;
 
 	/* If link is up then do not monitor temperature */
 	if (EFX_WORKAROUND_7884(efx) && efx->link_state.up)
 		return 0;
 
-	alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
-	alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
-	if (alarms1 < 0)
-		return alarms1;
-	if (alarms2 < 0)
-		return alarms2;
-	alarms1 &= mask;
-	alarms2 &= mask >> 8;
-	if (alarms1 || alarms2) {
+	reg = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
+	if (reg < 0)
+		return reg;
+	alarms = reg;
+	reg = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
+	if (reg < 0)
+		return reg;
+	alarms |= reg << 8;
+	alarms &= mask;
+
+	temp_crit = false;
+	if (alarms & LM87_ALARM_TEMP_INT) {
+		reg = i2c_smbus_read_byte_data(client, LM87_REG_TEMP_INT);
+		if (reg < 0)
+			return reg;
+		if (reg > FALCON_BOARD_TEMP_CRIT)
+			temp_crit = true;
+	}
+	if (alarms & LM87_ALARM_TEMP_EXT1) {
+		reg = i2c_smbus_read_byte_data(client, LM87_REG_TEMP_EXT1);
+		if (reg < 0)
+			return reg;
+		if (reg > FALCON_JUNC_TEMP_CRIT)
+			temp_crit = true;
+	}
+	elec_fault = alarms & ~(LM87_ALARM_TEMP_INT | LM87_ALARM_TEMP_EXT1);
+	is_failure = temp_crit || elec_fault;
+
+	if (alarms)
 		netif_err(efx, hw, efx->net_dev,
-			  "LM87 detected a hardware failure (status %02x:%02x)"
-			  "%s%s%s\n",
-			  alarms1, alarms2,
-			  (alarms1 & LM87_ALARM_TEMP_INT) ?
+			  "LM87 detected a hardware %s (status %02x:%02x)"
+			  "%s%s%s%s\n",
+			  is_failure ? "failure" : "problem",
+			  alarms & 0xff, alarms >> 8,
+			  (alarms & LM87_ALARM_TEMP_INT) ?
 			  "; board is overheating" : "",
-			  (alarms1 & LM87_ALARM_TEMP_EXT1) ?
+			  (alarms & LM87_ALARM_TEMP_EXT1) ?
 			  "; controller is overheating" : "",
-			  (alarms1 & ~(LM87_ALARM_TEMP_INT | LM87_ALARM_TEMP_EXT1)
-			   || alarms2) ?
-			  "; electrical fault" : "");
-		return -ERANGE;
-	}
+			  temp_crit ? "; reached critical temperature" : "",
+			  elec_fault ? "; electrical fault" : "");
 
-	return 0;
+	return is_failure ? -ERANGE : 0;
 }
 
 #else /* !CONFIG_SENSORS_LM87 */
@@ -325,7 +378,7 @@ static ssize_t set_phy_flash_cfg(struct device *dev,
 		new_mode = old_mode & ~PHY_MODE_SPECIAL;
 	else
 		new_mode = PHY_MODE_SPECIAL;
-	if (old_mode == new_mode) {
+	if (!((old_mode ^ new_mode) & PHY_MODE_SPECIAL)) {
 		err = 0;
 	} else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
 		err = -EBUSY;
@@ -362,10 +415,11 @@ static void sfe4001_fini(struct efx_nic *efx)
 
 static int sfe4001_check_hw(struct efx_nic *efx)
 {
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	s32 status;
 
 	/* If XAUI link is up then do not monitor */
-	if (EFX_WORKAROUND_7884(efx) && !efx->xmac_poll_required)
+	if (EFX_WORKAROUND_7884(efx) && !nic_data->xmac_poll_required)
 		return 0;
 
 	/* Check the powered status of the PHY. Lack of power implies that
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index b31f595ebb5..b49e8439464 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -16,7 +16,6 @@
 #include "io.h"
 #include "mac.h"
 #include "mdio_10g.h"
-#include "phy.h"
 #include "workarounds.h"
 
 /**************************************************************************
@@ -88,6 +87,7 @@ int falcon_reset_xaui(struct efx_nic *efx)
 
 static void falcon_ack_status_intr(struct efx_nic *efx)
 {
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	efx_oword_t reg;
 
 	if ((efx_nic_rev(efx) != EFX_REV_FALCON_B0) || LOOPBACK_INTERNAL(efx))
@@ -99,7 +99,7 @@ static void falcon_ack_status_intr(struct efx_nic *efx)
 
 	/* We can only use this interrupt to signal the negative edge of
 	 * xaui_align [we have to poll the positive edge]. */
-	if (efx->xmac_poll_required)
+	if (nic_data->xmac_poll_required)
 		return;
 
 	efx_reado(efx, &reg, FR_AB_XM_MGT_INT_MSK);
@@ -277,12 +277,14 @@ static bool falcon_xmac_check_fault(struct efx_nic *efx)
 
 static int falcon_reconfigure_xmac(struct efx_nic *efx)
 {
+	struct falcon_nic_data *nic_data = efx->nic_data;
+
 	falcon_reconfigure_xgxs_core(efx);
 	falcon_reconfigure_xmac_core(efx);
 
 	falcon_reconfigure_mac_wrapper(efx);
 
-	efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 5);
+	nic_data->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 5);
 	falcon_ack_status_intr(efx);
 
 	return 0;
@@ -350,11 +352,13 @@ static void falcon_update_stats_xmac(struct efx_nic *efx)
 
 void falcon_poll_xmac(struct efx_nic *efx)
 {
+	struct falcon_nic_data *nic_data = efx->nic_data;
+
 	if (!EFX_WORKAROUND_5147(efx) || !efx->link_state.up ||
-	    !efx->xmac_poll_required)
+	    !nic_data->xmac_poll_required)
 		return;
 
-	efx->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 1);
+	nic_data->xmac_poll_required = !falcon_xmac_link_ok_retry(efx, 1);
 	falcon_ack_status_intr(efx);
 }
 
diff --git a/drivers/net/sfc/filter.c b/drivers/net/sfc/filter.c
index 52cb6082b91..d4722c41c4c 100644
--- a/drivers/net/sfc/filter.c
+++ b/drivers/net/sfc/filter.c
@@ -7,6 +7,7 @@
  * by the Free Software Foundation, incorporated herein by reference.
  */
 
+#include <linux/in.h>
 #include "efx.h"
 #include "filter.h"
 #include "io.h"
@@ -26,19 +27,26 @@
  */
 #define FILTER_CTL_SRCH_MAX 200
 
+enum efx_filter_table_id {
+	EFX_FILTER_TABLE_RX_IP = 0,
+	EFX_FILTER_TABLE_RX_MAC,
+	EFX_FILTER_TABLE_COUNT,
+};
+
 struct efx_filter_table {
+	enum efx_filter_table_id id;
 	u32		offset;		/* address of table relative to BAR */
 	unsigned	size;		/* number of entries */
 	unsigned	step;		/* step between entries */
 	unsigned	used;		/* number currently used */
 	unsigned long	*used_bitmap;
 	struct efx_filter_spec *spec;
+	unsigned	search_depth[EFX_FILTER_TYPE_COUNT];
 };
 
 struct efx_filter_state {
 	spinlock_t	lock;
 	struct efx_filter_table table[EFX_FILTER_TABLE_COUNT];
-	unsigned	search_depth[EFX_FILTER_TYPE_COUNT];
 };
 
 /* The filter hash function is LFSR polynomial x^16 + x^3 + 1 of a 32-bit
@@ -65,68 +73,203 @@ static u16 efx_filter_increment(u32 key)
 }
 
 static enum efx_filter_table_id
-efx_filter_type_table_id(enum efx_filter_type type)
+efx_filter_spec_table_id(const struct efx_filter_spec *spec)
+{
+	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_IP != (EFX_FILTER_TCP_FULL >> 2));
+	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_IP != (EFX_FILTER_TCP_WILD >> 2));
+	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_IP != (EFX_FILTER_UDP_FULL >> 2));
+	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_IP != (EFX_FILTER_UDP_WILD >> 2));
+	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_MAC != (EFX_FILTER_MAC_FULL >> 2));
+	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_MAC != (EFX_FILTER_MAC_WILD >> 2));
+	EFX_BUG_ON_PARANOID(spec->type == EFX_FILTER_UNSPEC);
+	return spec->type >> 2;
+}
+
+static struct efx_filter_table *
+efx_filter_spec_table(struct efx_filter_state *state,
+		      const struct efx_filter_spec *spec)
 {
-	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_IP != (EFX_FILTER_RX_TCP_FULL >> 2));
-	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_IP != (EFX_FILTER_RX_TCP_WILD >> 2));
-	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_IP != (EFX_FILTER_RX_UDP_FULL >> 2));
-	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_IP != (EFX_FILTER_RX_UDP_WILD >> 2));
-	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_MAC != (EFX_FILTER_RX_MAC_FULL >> 2));
-	BUILD_BUG_ON(EFX_FILTER_TABLE_RX_MAC != (EFX_FILTER_RX_MAC_WILD >> 2));
-	return type >> 2;
+	if (spec->type == EFX_FILTER_UNSPEC)
+		return NULL;
+	else
+		return &state->table[efx_filter_spec_table_id(spec)];
 }
 
-static void
-efx_filter_table_reset_search_depth(struct efx_filter_state *state,
-				    enum efx_filter_table_id table_id)
+static void efx_filter_table_reset_search_depth(struct efx_filter_table *table)
 {
-	memset(state->search_depth + (table_id << 2), 0,
-	       sizeof(state->search_depth[0]) << 2);
+	memset(table->search_depth, 0, sizeof(table->search_depth));
 }
 
 static void efx_filter_push_rx_limits(struct efx_nic *efx)
 {
 	struct efx_filter_state *state = efx->filter_state;
+	struct efx_filter_table *table;
 	efx_oword_t filter_ctl;
 
 	efx_reado(efx, &filter_ctl, FR_BZ_RX_FILTER_CTL);
 
+	table = &state->table[EFX_FILTER_TABLE_RX_IP];
 	EFX_SET_OWORD_FIELD(filter_ctl, FRF_BZ_TCP_FULL_SRCH_LIMIT,
-			    state->search_depth[EFX_FILTER_RX_TCP_FULL] +
+			    table->search_depth[EFX_FILTER_TCP_FULL] +
 			    FILTER_CTL_SRCH_FUDGE_FULL);
 	EFX_SET_OWORD_FIELD(filter_ctl, FRF_BZ_TCP_WILD_SRCH_LIMIT,
-			    state->search_depth[EFX_FILTER_RX_TCP_WILD] +
+			    table->search_depth[EFX_FILTER_TCP_WILD] +
 			    FILTER_CTL_SRCH_FUDGE_WILD);
 	EFX_SET_OWORD_FIELD(filter_ctl, FRF_BZ_UDP_FULL_SRCH_LIMIT,
-			    state->search_depth[EFX_FILTER_RX_UDP_FULL] +
+			    table->search_depth[EFX_FILTER_UDP_FULL] +
 			    FILTER_CTL_SRCH_FUDGE_FULL);
 	EFX_SET_OWORD_FIELD(filter_ctl, FRF_BZ_UDP_WILD_SRCH_LIMIT,
-			    state->search_depth[EFX_FILTER_RX_UDP_WILD] +
+			    table->search_depth[EFX_FILTER_UDP_WILD] +
 			    FILTER_CTL_SRCH_FUDGE_WILD);
 
-	if (state->table[EFX_FILTER_TABLE_RX_MAC].size) {
+	table = &state->table[EFX_FILTER_TABLE_RX_MAC];
+	if (table->size) {
 		EFX_SET_OWORD_FIELD(
 			filter_ctl, FRF_CZ_ETHERNET_FULL_SEARCH_LIMIT,
-			state->search_depth[EFX_FILTER_RX_MAC_FULL] +
+			table->search_depth[EFX_FILTER_MAC_FULL] +
 			FILTER_CTL_SRCH_FUDGE_FULL);
 		EFX_SET_OWORD_FIELD(
 			filter_ctl, FRF_CZ_ETHERNET_WILDCARD_SEARCH_LIMIT,
-			state->search_depth[EFX_FILTER_RX_MAC_WILD] +
+			table->search_depth[EFX_FILTER_MAC_WILD] +
 			FILTER_CTL_SRCH_FUDGE_WILD);
 	}
 
 	efx_writeo(efx, &filter_ctl, FR_BZ_RX_FILTER_CTL);
 }
 
+static inline void __efx_filter_set_ipv4(struct efx_filter_spec *spec,
+					 __be32 host1, __be16 port1,
+					 __be32 host2, __be16 port2)
+{
+	spec->data[0] = ntohl(host1) << 16 | ntohs(port1);
+	spec->data[1] = ntohs(port2) << 16 | ntohl(host1) >> 16;
+	spec->data[2] = ntohl(host2);
+}
+
+/**
+ * efx_filter_set_ipv4_local - specify IPv4 host, transport protocol and port
+ * @spec: Specification to initialise
+ * @proto: Transport layer protocol number
+ * @host: Local host address (network byte order)
+ * @port: Local port (network byte order)
+ */
+int efx_filter_set_ipv4_local(struct efx_filter_spec *spec, u8 proto,
+			      __be32 host, __be16 port)
+{
+	__be32 host1;
+	__be16 port1;
+
+	EFX_BUG_ON_PARANOID(!(spec->flags & EFX_FILTER_FLAG_RX));
+
+	/* This cannot currently be combined with other filtering */
+	if (spec->type != EFX_FILTER_UNSPEC)
+		return -EPROTONOSUPPORT;
+
+	if (port == 0)
+		return -EINVAL;
+
+	switch (proto) {
+	case IPPROTO_TCP:
+		spec->type = EFX_FILTER_TCP_WILD;
+		break;
+	case IPPROTO_UDP:
+		spec->type = EFX_FILTER_UDP_WILD;
+		break;
+	default:
+		return -EPROTONOSUPPORT;
+	}
+
+	/* Filter is constructed in terms of source and destination,
+	 * with the odd wrinkle that the ports are swapped in a UDP
+	 * wildcard filter.  We need to convert from local and remote
+	 * (= zero for wildcard) addresses.
+	 */
+	host1 = 0;
+	if (proto != IPPROTO_UDP) {
+		port1 = 0;
+	} else {
+		port1 = port;
+		port = 0;
+	}
+
+	__efx_filter_set_ipv4(spec, host1, port1, host, port);
+	return 0;
+}
+
+/**
+ * efx_filter_set_ipv4_full - specify IPv4 hosts, transport protocol and ports
+ * @spec: Specification to initialise
+ * @proto: Transport layer protocol number
+ * @host: Local host address (network byte order)
+ * @port: Local port (network byte order)
+ * @rhost: Remote host address (network byte order)
+ * @rport: Remote port (network byte order)
+ */
+int efx_filter_set_ipv4_full(struct efx_filter_spec *spec, u8 proto,
+			     __be32 host, __be16 port,
+			     __be32 rhost, __be16 rport)
+{
+	EFX_BUG_ON_PARANOID(!(spec->flags & EFX_FILTER_FLAG_RX));
+
+	/* This cannot currently be combined with other filtering */
+	if (spec->type != EFX_FILTER_UNSPEC)
+		return -EPROTONOSUPPORT;
+
+	if (port == 0 || rport == 0)
+		return -EINVAL;
+
+	switch (proto) {
+	case IPPROTO_TCP:
+		spec->type = EFX_FILTER_TCP_FULL;
+		break;
+	case IPPROTO_UDP:
+		spec->type = EFX_FILTER_UDP_FULL;
+		break;
+	default:
+		return -EPROTONOSUPPORT;
+	}
+
+	__efx_filter_set_ipv4(spec, rhost, rport, host, port);
+	return 0;
+}
+
+/**
+ * efx_filter_set_eth_local - specify local Ethernet address and optional VID
+ * @spec: Specification to initialise
+ * @vid: VLAN ID to match, or %EFX_FILTER_VID_UNSPEC
+ * @addr: Local Ethernet MAC address
+ */
+int efx_filter_set_eth_local(struct efx_filter_spec *spec,
+			     u16 vid, const u8 *addr)
+{
+	EFX_BUG_ON_PARANOID(!(spec->flags & EFX_FILTER_FLAG_RX));
+
+	/* This cannot currently be combined with other filtering */
+	if (spec->type != EFX_FILTER_UNSPEC)
+		return -EPROTONOSUPPORT;
+
+	if (vid == EFX_FILTER_VID_UNSPEC) {
+		spec->type = EFX_FILTER_MAC_WILD;
+		spec->data[0] = 0;
+	} else {
+		spec->type = EFX_FILTER_MAC_FULL;
+		spec->data[0] = vid;
+	}
+
+	spec->data[1] = addr[2] << 24 | addr[3] << 16 | addr[4] << 8 | addr[5];
+	spec->data[2] = addr[0] << 8 | addr[1];
+	return 0;
+}
+
 /* Build a filter entry and return its n-tuple key. */
 static u32 efx_filter_build(efx_oword_t *filter, struct efx_filter_spec *spec)
 {
 	u32 data3;
 
-	switch (efx_filter_type_table_id(spec->type)) {
+	switch (efx_filter_spec_table_id(spec)) {
 	case EFX_FILTER_TABLE_RX_IP: {
-		bool is_udp = (spec->type == EFX_FILTER_RX_UDP_FULL ||
-			       spec->type == EFX_FILTER_RX_UDP_WILD);
+		bool is_udp = (spec->type == EFX_FILTER_UDP_FULL ||
+			       spec->type == EFX_FILTER_UDP_WILD);
 		EFX_POPULATE_OWORD_7(
 			*filter,
 			FRF_BZ_RSS_EN,
@@ -143,7 +286,7 @@ static u32 efx_filter_build(efx_oword_t *filter, struct efx_filter_spec *spec)
 	}
 
 	case EFX_FILTER_TABLE_RX_MAC: {
-		bool is_wild = spec->type == EFX_FILTER_RX_MAC_WILD;
+		bool is_wild = spec->type == EFX_FILTER_MAC_WILD;
 		EFX_POPULATE_OWORD_8(
 			*filter,
 			FRF_CZ_RMFT_RSS_EN,
@@ -206,6 +349,14 @@ found:
 	return filter_idx;
 }
 
+/* Construct/deconstruct external filter IDs */
+
+static inline int
+efx_filter_make_id(enum efx_filter_table_id table_id, unsigned index)
+{
+	return table_id << 16 | index;
+}
+
 /**
  * efx_filter_insert_filter - add or replace a filter
  * @efx: NIC in which to insert the filter
@@ -213,30 +364,28 @@ found:
  * @replace: Flag for whether the specified filter may replace a filter
  *	with an identical match expression and equal or lower priority
  *
- * On success, return the filter index within its table.
+ * On success, return the filter ID.
  * On failure, return a negative error code.
  */
 int efx_filter_insert_filter(struct efx_nic *efx, struct efx_filter_spec *spec,
 			     bool replace)
 {
 	struct efx_filter_state *state = efx->filter_state;
-	enum efx_filter_table_id table_id =
-		efx_filter_type_table_id(spec->type);
-	struct efx_filter_table *table = &state->table[table_id];
+	struct efx_filter_table *table = efx_filter_spec_table(state, spec);
 	struct efx_filter_spec *saved_spec;
 	efx_oword_t filter;
 	int filter_idx, depth;
 	u32 key;
 	int rc;
 
-	if (table->size == 0)
+	if (!table || table->size == 0)
 		return -EINVAL;
 
 	key = efx_filter_build(&filter, spec);
 
 	netif_vdbg(efx, hw, efx->net_dev,
 		   "%s: type %d search_depth=%d", __func__, spec->type,
-		   state->search_depth[spec->type]);
+		   table->search_depth[spec->type]);
 
 	spin_lock_bh(&state->lock);
 
@@ -263,8 +412,8 @@ int efx_filter_insert_filter(struct efx_nic *efx, struct efx_filter_spec *spec,
 	}
 	*saved_spec = *spec;
 
-	if (state->search_depth[spec->type] < depth) {
-		state->search_depth[spec->type] = depth;
+	if (table->search_depth[spec->type] < depth) {
+		table->search_depth[spec->type] = depth;
 		efx_filter_push_rx_limits(efx);
 	}
 
@@ -273,6 +422,7 @@ int efx_filter_insert_filter(struct efx_nic *efx, struct efx_filter_spec *spec,
 	netif_vdbg(efx, hw, efx->net_dev,
 		   "%s: filter type %d index %d rxq %u set",
 		   __func__, spec->type, filter_idx, spec->dmaq_id);
+	rc = efx_filter_make_id(table->id, filter_idx);
 
 out:
 	spin_unlock_bh(&state->lock);
@@ -306,15 +456,16 @@ static void efx_filter_table_clear_entry(struct efx_nic *efx,
 int efx_filter_remove_filter(struct efx_nic *efx, struct efx_filter_spec *spec)
 {
 	struct efx_filter_state *state = efx->filter_state;
-	enum efx_filter_table_id table_id =
-		efx_filter_type_table_id(spec->type);
-	struct efx_filter_table *table = &state->table[table_id];
+	struct efx_filter_table *table = efx_filter_spec_table(state, spec);
 	struct efx_filter_spec *saved_spec;
 	efx_oword_t filter;
 	int filter_idx, depth;
 	u32 key;
 	int rc;
 
+	if (!table)
+		return -EINVAL;
+
 	key = efx_filter_build(&filter, spec);
 
 	spin_lock_bh(&state->lock);
@@ -332,7 +483,7 @@ int efx_filter_remove_filter(struct efx_nic *efx, struct efx_filter_spec *spec)
 
 	efx_filter_table_clear_entry(efx, table, filter_idx);
 	if (table->used == 0)
-		efx_filter_table_reset_search_depth(state, table_id);
+		efx_filter_table_reset_search_depth(table);
 	rc = 0;
 
 out:
@@ -340,15 +491,9 @@ out:
 	return rc;
 }
 
-/**
- * efx_filter_table_clear - remove filters from a table by priority
- * @efx: NIC from which to remove the filters
- * @table_id: Table from which to remove the filters
- * @priority: Maximum priority to remove
- */
-void efx_filter_table_clear(struct efx_nic *efx,
-			    enum efx_filter_table_id table_id,
-			    enum efx_filter_priority priority)
+static void efx_filter_table_clear(struct efx_nic *efx,
+				   enum efx_filter_table_id table_id,
+				   enum efx_filter_priority priority)
 {
 	struct efx_filter_state *state = efx->filter_state;
 	struct efx_filter_table *table = &state->table[table_id];
@@ -360,11 +505,22 @@ void efx_filter_table_clear(struct efx_nic *efx,
 		if (table->spec[filter_idx].priority <= priority)
 			efx_filter_table_clear_entry(efx, table, filter_idx);
 	if (table->used == 0)
-		efx_filter_table_reset_search_depth(state, table_id);
+		efx_filter_table_reset_search_depth(table);
 
 	spin_unlock_bh(&state->lock);
 }
 
+/**
+ * efx_filter_clear_rx - remove RX filters by priority
+ * @efx: NIC from which to remove the filters
+ * @priority: Maximum priority to remove
+ */
+void efx_filter_clear_rx(struct efx_nic *efx, enum efx_filter_priority priority)
+{
+	efx_filter_table_clear(efx, EFX_FILTER_TABLE_RX_IP, priority);
+	efx_filter_table_clear(efx, EFX_FILTER_TABLE_RX_MAC, priority);
+}
+
 /* Restore filter stater after reset */
 void efx_restore_filters(struct efx_nic *efx)
 {
@@ -407,6 +563,7 @@ int efx_probe_filters(struct efx_nic *efx)
 
 	if (efx_nic_rev(efx) >= EFX_REV_FALCON_B0) {
 		table = &state->table[EFX_FILTER_TABLE_RX_IP];
+		table->id = EFX_FILTER_TABLE_RX_IP;
 		table->offset = FR_BZ_RX_FILTER_TBL0;
 		table->size = FR_BZ_RX_FILTER_TBL0_ROWS;
 		table->step = FR_BZ_RX_FILTER_TBL0_STEP;
@@ -414,6 +571,7 @@ int efx_probe_filters(struct efx_nic *efx)
 
 	if (efx_nic_rev(efx) >= EFX_REV_SIENA_A0) {
 		table = &state->table[EFX_FILTER_TABLE_RX_MAC];
+		table->id = EFX_FILTER_TABLE_RX_MAC;
 		table->offset = FR_CZ_RX_MAC_FILTER_TBL0;
 		table->size = FR_CZ_RX_MAC_FILTER_TBL0_ROWS;
 		table->step = FR_CZ_RX_MAC_FILTER_TBL0_STEP;
@@ -428,10 +586,9 @@ int efx_probe_filters(struct efx_nic *efx)
 					     GFP_KERNEL);
 		if (!table->used_bitmap)
 			goto fail;
-		table->spec = vmalloc(table->size * sizeof(*table->spec));
+		table->spec = vzalloc(table->size * sizeof(*table->spec));
 		if (!table->spec)
 			goto fail;
-		memset(table->spec, 0, table->size * sizeof(*table->spec));
 	}
 
 	return 0;
diff --git a/drivers/net/sfc/filter.h b/drivers/net/sfc/filter.h
index a53319ded79..872f2132a49 100644
--- a/drivers/net/sfc/filter.h
+++ b/drivers/net/sfc/filter.h
@@ -12,31 +12,27 @@
 
 #include <linux/types.h>
 
-enum efx_filter_table_id {
-	EFX_FILTER_TABLE_RX_IP = 0,
-	EFX_FILTER_TABLE_RX_MAC,
-	EFX_FILTER_TABLE_COUNT,
-};
-
 /**
  * enum efx_filter_type - type of hardware filter
- * @EFX_FILTER_RX_TCP_FULL: RX, matching TCP/IPv4 4-tuple
- * @EFX_FILTER_RX_TCP_WILD: RX, matching TCP/IPv4 destination (host, port)
- * @EFX_FILTER_RX_UDP_FULL: RX, matching UDP/IPv4 4-tuple
- * @EFX_FILTER_RX_UDP_WILD: RX, matching UDP/IPv4 destination (host, port)
- * @EFX_FILTER_RX_MAC_FULL: RX, matching Ethernet destination MAC address, VID
- * @EFX_FILTER_RX_MAC_WILD: RX, matching Ethernet destination MAC address
+ * @EFX_FILTER_TCP_FULL: Matching TCP/IPv4 4-tuple
+ * @EFX_FILTER_TCP_WILD: Matching TCP/IPv4 destination (host, port)
+ * @EFX_FILTER_UDP_FULL: Matching UDP/IPv4 4-tuple
+ * @EFX_FILTER_UDP_WILD: Matching UDP/IPv4 destination (host, port)
+ * @EFX_FILTER_MAC_FULL: Matching Ethernet destination MAC address, VID
+ * @EFX_FILTER_MAC_WILD: Matching Ethernet destination MAC address
+ * @EFX_FILTER_UNSPEC: Match type is unspecified
  *
- * Falcon NICs only support the RX TCP/IPv4 and UDP/IPv4 filter types.
+ * Falcon NICs only support the TCP/IPv4 and UDP/IPv4 filter types.
  */
 enum efx_filter_type {
-	EFX_FILTER_RX_TCP_FULL = 0,
-	EFX_FILTER_RX_TCP_WILD,
-	EFX_FILTER_RX_UDP_FULL,
-	EFX_FILTER_RX_UDP_WILD,
-	EFX_FILTER_RX_MAC_FULL = 4,
-	EFX_FILTER_RX_MAC_WILD,
-	EFX_FILTER_TYPE_COUNT,
+	EFX_FILTER_TCP_FULL = 0,
+	EFX_FILTER_TCP_WILD,
+	EFX_FILTER_UDP_FULL,
+	EFX_FILTER_UDP_WILD,
+	EFX_FILTER_MAC_FULL = 4,
+	EFX_FILTER_MAC_WILD,
+	EFX_FILTER_TYPE_COUNT,		/* number of specific types */
+	EFX_FILTER_UNSPEC = 0xf,
 };
 
 /**
@@ -63,13 +59,13 @@ enum efx_filter_priority {
  * @EFX_FILTER_FLAG_RX_OVERRIDE_IP: Enables a MAC filter to override
  *	any IP filter that matches the same packet.  By default, IP
  *	filters take precedence.
- *
- * Currently, no flags are defined for TX filters.
+ * @EFX_FILTER_FLAG_RX: Filter is for RX
  */
 enum efx_filter_flags {
 	EFX_FILTER_FLAG_RX_RSS = 0x01,
 	EFX_FILTER_FLAG_RX_SCATTER = 0x02,
 	EFX_FILTER_FLAG_RX_OVERRIDE_IP = 0x04,
+	EFX_FILTER_FLAG_RX = 0x08,
 };
 
 /**
@@ -91,99 +87,26 @@ struct efx_filter_spec {
 	u32	data[3];
 };
 
-/**
- * efx_filter_set_rx_tcp_full - specify RX filter with TCP/IPv4 full match
- * @spec: Specification to initialise
- * @shost: Source host address (host byte order)
- * @sport: Source port (host byte order)
- * @dhost: Destination host address (host byte order)
- * @dport: Destination port (host byte order)
- */
-static inline void
-efx_filter_set_rx_tcp_full(struct efx_filter_spec *spec,
-			   u32 shost, u16 sport, u32 dhost, u16 dport)
-{
-	spec->type = EFX_FILTER_RX_TCP_FULL;
-	spec->data[0] = sport | shost << 16;
-	spec->data[1] = dport << 16 | shost >> 16;
-	spec->data[2] = dhost;
-}
-
-/**
- * efx_filter_set_rx_tcp_wild - specify RX filter with TCP/IPv4 wildcard match
- * @spec: Specification to initialise
- * @dhost: Destination host address (host byte order)
- * @dport: Destination port (host byte order)
- */
-static inline void
-efx_filter_set_rx_tcp_wild(struct efx_filter_spec *spec, u32 dhost, u16 dport)
-{
-	spec->type = EFX_FILTER_RX_TCP_WILD;
-	spec->data[0] = 0;
-	spec->data[1] = dport << 16;
-	spec->data[2] = dhost;
-}
-
-/**
- * efx_filter_set_rx_udp_full - specify RX filter with UDP/IPv4 full match
- * @spec: Specification to initialise
- * @shost: Source host address (host byte order)
- * @sport: Source port (host byte order)
- * @dhost: Destination host address (host byte order)
- * @dport: Destination port (host byte order)
- */
-static inline void
-efx_filter_set_rx_udp_full(struct efx_filter_spec *spec,
-			   u32 shost, u16 sport, u32 dhost, u16 dport)
-{
-	spec->type = EFX_FILTER_RX_UDP_FULL;
-	spec->data[0] = sport | shost << 16;
-	spec->data[1] = dport << 16 | shost >> 16;
-	spec->data[2] = dhost;
-}
-
-/**
- * efx_filter_set_rx_udp_wild - specify RX filter with UDP/IPv4 wildcard match
- * @spec: Specification to initialise
- * @dhost: Destination host address (host byte order)
- * @dport: Destination port (host byte order)
- */
-static inline void
-efx_filter_set_rx_udp_wild(struct efx_filter_spec *spec, u32 dhost, u16 dport)
+static inline void efx_filter_init_rx(struct efx_filter_spec *spec,
+				      enum efx_filter_priority priority,
+				      enum efx_filter_flags flags,
+				      unsigned rxq_id)
 {
-	spec->type = EFX_FILTER_RX_UDP_WILD;
-	spec->data[0] = dport;
-	spec->data[1] = 0;
-	spec->data[2] = dhost;
+	spec->type = EFX_FILTER_UNSPEC;
+	spec->priority = priority;
+	spec->flags = EFX_FILTER_FLAG_RX | flags;
+	spec->dmaq_id = rxq_id;
 }
 
-/**
- * efx_filter_set_rx_mac_full - specify RX filter with MAC full match
- * @spec: Specification to initialise
- * @vid: VLAN ID
- * @addr: Destination MAC address
- */
-static inline void efx_filter_set_rx_mac_full(struct efx_filter_spec *spec,
-					      u16 vid, const u8 *addr)
-{
-	spec->type = EFX_FILTER_RX_MAC_FULL;
-	spec->data[0] = vid;
-	spec->data[1] = addr[2] << 24 | addr[3] << 16 | addr[4] << 8 | addr[5];
-	spec->data[2] = addr[0] << 8 | addr[1];
-}
-
-/**
- * efx_filter_set_rx_mac_full - specify RX filter with MAC wildcard match
- * @spec: Specification to initialise
- * @addr: Destination MAC address
- */
-static inline void efx_filter_set_rx_mac_wild(struct efx_filter_spec *spec,
-					      const u8 *addr)
-{
-	spec->type = EFX_FILTER_RX_MAC_WILD;
-	spec->data[0] = 0;
-	spec->data[1] = addr[2] << 24 | addr[3] << 16 | addr[4] << 8 | addr[5];
-	spec->data[2] = addr[0] << 8 | addr[1];
-}
+extern int efx_filter_set_ipv4_local(struct efx_filter_spec *spec, u8 proto,
+				     __be32 host, __be16 port);
+extern int efx_filter_set_ipv4_full(struct efx_filter_spec *spec, u8 proto,
+				    __be32 host, __be16 port,
+				    __be32 rhost, __be16 rport);
+extern int efx_filter_set_eth_local(struct efx_filter_spec *spec,
+				    u16 vid, const u8 *addr);
+enum {
+	EFX_FILTER_VID_UNSPEC = 0xffff,
+};
 
 #endif /* EFX_FILTER_H */
diff --git a/drivers/net/sfc/io.h b/drivers/net/sfc/io.h
index 85a99fe8743..6da4ae20a03 100644
--- a/drivers/net/sfc/io.h
+++ b/drivers/net/sfc/io.h
@@ -22,28 +22,39 @@
  *
  * Notes on locking strategy:
  *
- * Most NIC registers require 16-byte (or 8-byte, for SRAM) atomic writes
- * which necessitates locking.
- * Under normal operation few writes to NIC registers are made and these
- * registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and TX_DESC_UPD_REG) are special
- * cased to allow 4-byte (hence lockless) accesses.
+ * Most CSRs are 128-bit (oword) and therefore cannot be read or
+ * written atomically.  Access from the host is buffered by the Bus
+ * Interface Unit (BIU).  Whenever the host reads from the lowest
+ * address of such a register, or from the address of a different such
+ * register, the BIU latches the register's value.  Subsequent reads
+ * from higher addresses of the same register will read the latched
+ * value.  Whenever the host writes part of such a register, the BIU
+ * collects the written value and does not write to the underlying
+ * register until all 4 dwords have been written.  A similar buffering
+ * scheme applies to host access to the NIC's 64-bit SRAM.
  *
- * It *is* safe to write to these 4-byte registers in the middle of an
- * access to an 8-byte or 16-byte register.  We therefore use a
- * spinlock to protect accesses to the larger registers, but no locks
- * for the 4-byte registers.
+ * Access to different CSRs and 64-bit SRAM words must be serialised,
+ * since interleaved access can result in lost writes or lost
+ * information from read-to-clear fields.  We use efx_nic::biu_lock
+ * for this.  (We could use separate locks for read and write, but
+ * this is not normally a performance bottleneck.)
  *
- * A write barrier is needed to ensure that DW3 is written after DW0/1/2
- * due to the way the 16byte registers are "collected" in the BIU.
+ * The DMA descriptor pointers (RX_DESC_UPD and TX_DESC_UPD) are
+ * 128-bit but are special-cased in the BIU to avoid the need for
+ * locking in the host:
  *
- * We also lock when carrying out reads, to ensure consistency of the
- * data (made possible since the BIU reads all 128 bits into a cache).
- * Reads are very rare, so this isn't a significant performance
- * impact.  (Most data transferred from NIC to host is DMAed directly
- * into host memory).
- *
- * I/O BAR access uses locks for both reads and writes (but is only provided
- * for testing purposes).
+ * - They are write-only.
+ * - The semantics of writing to these registers are such that
+ *   replacing the low 96 bits with zero does not affect functionality.
+ * - If the host writes to the last dword address of such a register
+ *   (i.e. the high 32 bits) the underlying register will always be
+ *   written.  If the collector does not hold values for the low 96
+ *   bits of the register, they will be written as zero.  Writing to
+ *   the last qword does not have this effect and must not be done.
+ * - If the host writes to the address of any other part of such a
+ *   register while the collector already holds values for some other
+ *   register, the write is discarded and the collector maintains its
+ *   current state.
  */
 
 #if BITS_PER_LONG == 64
@@ -72,7 +83,7 @@ static inline __le32 _efx_readd(struct efx_nic *efx, unsigned int reg)
 	return (__force __le32)__raw_readl(efx->membase + reg);
 }
 
-/* Writes to a normal 16-byte Efx register, locking as appropriate. */
+/* Write a normal 128-bit CSR, locking as appropriate. */
 static inline void efx_writeo(struct efx_nic *efx, efx_oword_t *value,
 			      unsigned int reg)
 {
@@ -85,21 +96,18 @@ static inline void efx_writeo(struct efx_nic *efx, efx_oword_t *value,
 	spin_lock_irqsave(&efx->biu_lock, flags);
 #ifdef EFX_USE_QWORD_IO
 	_efx_writeq(efx, value->u64[0], reg + 0);
-	wmb();
 	_efx_writeq(efx, value->u64[1], reg + 8);
 #else
 	_efx_writed(efx, value->u32[0], reg + 0);
 	_efx_writed(efx, value->u32[1], reg + 4);
 	_efx_writed(efx, value->u32[2], reg + 8);
-	wmb();
 	_efx_writed(efx, value->u32[3], reg + 12);
 #endif
 	mmiowb();
 	spin_unlock_irqrestore(&efx->biu_lock, flags);
 }
 
-/* Write an 8-byte NIC SRAM entry through the supplied mapping,
- * locking as appropriate. */
+/* Write 64-bit SRAM through the supplied mapping, locking as appropriate. */
 static inline void efx_sram_writeq(struct efx_nic *efx, void __iomem *membase,
 				   efx_qword_t *value, unsigned int index)
 {
@@ -115,36 +123,25 @@ static inline void efx_sram_writeq(struct efx_nic *efx, void __iomem *membase,
 	__raw_writeq((__force u64)value->u64[0], membase + addr);
 #else
 	__raw_writel((__force u32)value->u32[0], membase + addr);
-	wmb();
 	__raw_writel((__force u32)value->u32[1], membase + addr + 4);
 #endif
 	mmiowb();
 	spin_unlock_irqrestore(&efx->biu_lock, flags);
 }
 
-/* Write dword to NIC register that allows partial writes
- *
- * Some registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and
- * TX_DESC_UPD_REG) can be written to as a single dword.  This allows
- * for lockless writes.
- */
+/* Write a 32-bit CSR or the last dword of a special 128-bit CSR */
 static inline void efx_writed(struct efx_nic *efx, efx_dword_t *value,
 			      unsigned int reg)
 {
 	netif_vdbg(efx, hw, efx->net_dev,
-		   "writing partial register %x with "EFX_DWORD_FMT"\n",
+		   "writing register %x with "EFX_DWORD_FMT"\n",
 		   reg, EFX_DWORD_VAL(*value));
 
 	/* No lock required */
 	_efx_writed(efx, value->u32[0], reg);
 }
 
-/* Read from a NIC register
- *
- * This reads an entire 16-byte register in one go, locking as
- * appropriate.  It is essential to read the first dword first, as this
- * prompts the NIC to load the current value into the shadow register.
- */
+/* Read a 128-bit CSR, locking as appropriate. */
 static inline void efx_reado(struct efx_nic *efx, efx_oword_t *value,
 			     unsigned int reg)
 {
@@ -152,7 +149,6 @@ static inline void efx_reado(struct efx_nic *efx, efx_oword_t *value,
 
 	spin_lock_irqsave(&efx->biu_lock, flags);
 	value->u32[0] = _efx_readd(efx, reg + 0);
-	rmb();
 	value->u32[1] = _efx_readd(efx, reg + 4);
 	value->u32[2] = _efx_readd(efx, reg + 8);
 	value->u32[3] = _efx_readd(efx, reg + 12);
@@ -163,8 +159,7 @@ static inline void efx_reado(struct efx_nic *efx, efx_oword_t *value,
 		   EFX_OWORD_VAL(*value));
 }
 
-/* Read an 8-byte SRAM entry through supplied mapping,
- * locking as appropriate. */
+/* Read 64-bit SRAM through the supplied mapping, locking as appropriate. */
 static inline void efx_sram_readq(struct efx_nic *efx, void __iomem *membase,
 				  efx_qword_t *value, unsigned int index)
 {
@@ -176,7 +171,6 @@ static inline void efx_sram_readq(struct efx_nic *efx, void __iomem *membase,
 	value->u64[0] = (__force __le64)__raw_readq(membase + addr);
 #else
 	value->u32[0] = (__force __le32)__raw_readl(membase + addr);
-	rmb();
 	value->u32[1] = (__force __le32)__raw_readl(membase + addr + 4);
 #endif
 	spin_unlock_irqrestore(&efx->biu_lock, flags);
@@ -186,7 +180,7 @@ static inline void efx_sram_readq(struct efx_nic *efx, void __iomem *membase,
 		   addr, EFX_QWORD_VAL(*value));
 }
 
-/* Read dword from register that allows partial writes (sic) */
+/* Read a 32-bit CSR or SRAM */
 static inline void efx_readd(struct efx_nic *efx, efx_dword_t *value,
 				unsigned int reg)
 {
@@ -196,28 +190,28 @@ static inline void efx_readd(struct efx_nic *efx, efx_dword_t *value,
 		   reg, EFX_DWORD_VAL(*value));
 }
 
-/* Write to a register forming part of a table */
+/* Write a 128-bit CSR forming part of a table */
 static inline void efx_writeo_table(struct efx_nic *efx, efx_oword_t *value,
 				      unsigned int reg, unsigned int index)
 {
 	efx_writeo(efx, value, reg + index * sizeof(efx_oword_t));
 }
 
-/* Read to a register forming part of a table */
+/* Read a 128-bit CSR forming part of a table */
 static inline void efx_reado_table(struct efx_nic *efx, efx_oword_t *value,
 				     unsigned int reg, unsigned int index)
 {
 	efx_reado(efx, value, reg + index * sizeof(efx_oword_t));
 }
 
-/* Write to a dword register forming part of a table */
+/* Write a 32-bit CSR forming part of a table, or 32-bit SRAM */
 static inline void efx_writed_table(struct efx_nic *efx, efx_dword_t *value,
 				       unsigned int reg, unsigned int index)
 {
 	efx_writed(efx, value, reg + index * sizeof(efx_oword_t));
 }
 
-/* Read from a dword register forming part of a table */
+/* Read a 32-bit CSR forming part of a table, or 32-bit SRAM */
 static inline void efx_readd_table(struct efx_nic *efx, efx_dword_t *value,
 				   unsigned int reg, unsigned int index)
 {
@@ -231,29 +225,54 @@ static inline void efx_readd_table(struct efx_nic *efx, efx_dword_t *value,
 #define EFX_PAGED_REG(page, reg) \
 	((page) * EFX_PAGE_BLOCK_SIZE + (reg))
 
-/* As for efx_writeo(), but for a page-mapped register. */
-static inline void efx_writeo_page(struct efx_nic *efx, efx_oword_t *value,
-				   unsigned int reg, unsigned int page)
+/* Write the whole of RX_DESC_UPD or TX_DESC_UPD */
+static inline void _efx_writeo_page(struct efx_nic *efx, efx_oword_t *value,
+				    unsigned int reg, unsigned int page)
 {
-	efx_writeo(efx, value, EFX_PAGED_REG(page, reg));
-}
+	reg = EFX_PAGED_REG(page, reg);
 
-/* As for efx_writed(), but for a page-mapped register. */
-static inline void efx_writed_page(struct efx_nic *efx, efx_dword_t *value,
-				   unsigned int reg, unsigned int page)
+	netif_vdbg(efx, hw, efx->net_dev,
+		   "writing register %x with " EFX_OWORD_FMT "\n", reg,
+		   EFX_OWORD_VAL(*value));
+
+#ifdef EFX_USE_QWORD_IO
+	_efx_writeq(efx, value->u64[0], reg + 0);
+#else
+	_efx_writed(efx, value->u32[0], reg + 0);
+	_efx_writed(efx, value->u32[1], reg + 4);
+#endif
+	_efx_writed(efx, value->u32[2], reg + 8);
+	_efx_writed(efx, value->u32[3], reg + 12);
+}
+#define efx_writeo_page(efx, value, reg, page)				\
+	_efx_writeo_page(efx, value,					\
+			 reg +						\
+			 BUILD_BUG_ON_ZERO((reg) != 0x830 && (reg) != 0xa10), \
+			 page)
+
+/* Write a page-mapped 32-bit CSR (EVQ_RPTR or the high bits of
+ * RX_DESC_UPD or TX_DESC_UPD)
+ */
+static inline void _efx_writed_page(struct efx_nic *efx, efx_dword_t *value,
+				    unsigned int reg, unsigned int page)
 {
 	efx_writed(efx, value, EFX_PAGED_REG(page, reg));
 }
-
-/* Write dword to page-mapped register with an extra lock.
- *
- * As for efx_writed_page(), but for a register that suffers from
- * SFC bug 3181. Take out a lock so the BIU collector cannot be
- * confused. */
-static inline void efx_writed_page_locked(struct efx_nic *efx,
-					  efx_dword_t *value,
-					  unsigned int reg,
-					  unsigned int page)
+#define efx_writed_page(efx, value, reg, page)				\
+	_efx_writed_page(efx, value,					\
+			 reg +						\
+			 BUILD_BUG_ON_ZERO((reg) != 0x400 && (reg) != 0x83c \
+					   && (reg) != 0xa1c),		\
+			 page)
+
+/* Write TIMER_COMMAND.  This is a page-mapped 32-bit CSR, but a bug
+ * in the BIU means that writes to TIMER_COMMAND[0] invalidate the
+ * collector register.
+ */
+static inline void _efx_writed_page_locked(struct efx_nic *efx,
+					   efx_dword_t *value,
+					   unsigned int reg,
+					   unsigned int page)
 {
 	unsigned long flags __attribute__ ((unused));
 
@@ -265,5 +284,9 @@ static inline void efx_writed_page_locked(struct efx_nic *efx,
 		efx_writed(efx, value, EFX_PAGED_REG(page, reg));
 	}
 }
+#define efx_writed_page_locked(efx, value, reg, page)			\
+	_efx_writed_page_locked(efx, value,				\
+				reg + BUILD_BUG_ON_ZERO((reg) != 0x420), \
+				page)
 
 #endif /* EFX_IO_H */
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 12cf910c2ce..b716e827b29 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -381,7 +381,7 @@ int efx_mcdi_rpc(struct efx_nic *efx, unsigned cmd,
 				  -rc);
 			efx_schedule_reset(efx, RESET_TYPE_MC_FAILURE);
 		} else
-			netif_err(efx, hw, efx->net_dev,
+			netif_dbg(efx, hw, efx->net_dev,
 				  "MC command 0x%x inlen %d failed rc=%d\n",
 				  cmd, (int)inlen, -rc);
 	}
@@ -463,6 +463,7 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc)
 		if (mcdi->mode == MCDI_MODE_EVENTS) {
 			mcdi->resprc = rc;
 			mcdi->resplen = 0;
+			++mcdi->credits;
 		}
 	} else
 		/* Nobody was waiting for an MCDI request, so trigger a reset */
diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c
index c992742446b..0e97eed663c 100644
--- a/drivers/net/sfc/mcdi_phy.c
+++ b/drivers/net/sfc/mcdi_phy.c
@@ -16,7 +16,6 @@
 #include "phy.h"
 #include "mcdi.h"
 #include "mcdi_pcol.h"
-#include "mdio_10g.h"
 #include "nic.h"
 #include "selftest.h"
 
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 98d94602042..56b0266b441 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -15,7 +15,6 @@
 #include "net_driver.h"
 #include "mdio_10g.h"
 #include "workarounds.h"
-#include "nic.h"
 
 unsigned efx_mdio_id_oui(u32 id)
 {
diff --git a/drivers/net/sfc/mtd.c b/drivers/net/sfc/mtd.c
index 02e54b4f701..d38627448c2 100644
--- a/drivers/net/sfc/mtd.c
+++ b/drivers/net/sfc/mtd.c
@@ -321,14 +321,15 @@ static int falcon_mtd_read(struct mtd_info *mtd, loff_t start,
 	struct efx_mtd *efx_mtd = mtd->priv;
 	const struct efx_spi_device *spi = efx_mtd->spi;
 	struct efx_nic *efx = efx_mtd->efx;
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	int rc;
 
-	rc = mutex_lock_interruptible(&efx->spi_lock);
+	rc = mutex_lock_interruptible(&nic_data->spi_lock);
 	if (rc)
 		return rc;
 	rc = falcon_spi_read(efx, spi, part->offset + start, len,
 			     retlen, buffer);
-	mutex_unlock(&efx->spi_lock);
+	mutex_unlock(&nic_data->spi_lock);
 	return rc;
 }
 
@@ -337,13 +338,14 @@ static int falcon_mtd_erase(struct mtd_info *mtd, loff_t start, size_t len)
 	struct efx_mtd_partition *part = to_efx_mtd_partition(mtd);
 	struct efx_mtd *efx_mtd = mtd->priv;
 	struct efx_nic *efx = efx_mtd->efx;
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	int rc;
 
-	rc = mutex_lock_interruptible(&efx->spi_lock);
+	rc = mutex_lock_interruptible(&nic_data->spi_lock);
 	if (rc)
 		return rc;
 	rc = efx_spi_erase(part, part->offset + start, len);
-	mutex_unlock(&efx->spi_lock);
+	mutex_unlock(&nic_data->spi_lock);
 	return rc;
 }
 
@@ -354,14 +356,15 @@ static int falcon_mtd_write(struct mtd_info *mtd, loff_t start,
 	struct efx_mtd *efx_mtd = mtd->priv;
 	const struct efx_spi_device *spi = efx_mtd->spi;
 	struct efx_nic *efx = efx_mtd->efx;
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	int rc;
 
-	rc = mutex_lock_interruptible(&efx->spi_lock);
+	rc = mutex_lock_interruptible(&nic_data->spi_lock);
 	if (rc)
 		return rc;
 	rc = falcon_spi_write(efx, spi, part->offset + start, len,
 			      retlen, buffer);
-	mutex_unlock(&efx->spi_lock);
+	mutex_unlock(&nic_data->spi_lock);
 	return rc;
 }
 
@@ -370,11 +373,12 @@ static int falcon_mtd_sync(struct mtd_info *mtd)
 	struct efx_mtd_partition *part = to_efx_mtd_partition(mtd);
 	struct efx_mtd *efx_mtd = mtd->priv;
 	struct efx_nic *efx = efx_mtd->efx;
+	struct falcon_nic_data *nic_data = efx->nic_data;
 	int rc;
 
-	mutex_lock(&efx->spi_lock);
+	mutex_lock(&nic_data->spi_lock);
 	rc = efx_spi_slow_wait(part, true);
-	mutex_unlock(&efx->spi_lock);
+	mutex_unlock(&nic_data->spi_lock);
 	return rc;
 }
 
@@ -387,35 +391,67 @@ static struct efx_mtd_ops falcon_mtd_ops = {
 
 static int falcon_mtd_probe(struct efx_nic *efx)
 {
-	struct efx_spi_device *spi = efx->spi_flash;
+	struct falcon_nic_data *nic_data = efx->nic_data;
+	struct efx_spi_device *spi;
 	struct efx_mtd *efx_mtd;
-	int rc;
+	int rc = -ENODEV;
 
 	ASSERT_RTNL();
 
-	if (!spi || spi->size <= FALCON_FLASH_BOOTCODE_START)
-		return -ENODEV;
-
-	efx_mtd = kzalloc(sizeof(*efx_mtd) + sizeof(efx_mtd->part[0]),
-			  GFP_KERNEL);
-	if (!efx_mtd)
-		return -ENOMEM;
-
-	efx_mtd->spi = spi;
-	efx_mtd->name = "flash";
-	efx_mtd->ops = &falcon_mtd_ops;
+	spi = &nic_data->spi_flash;
+	if (efx_spi_present(spi) && spi->size > FALCON_FLASH_BOOTCODE_START) {
+		efx_mtd = kzalloc(sizeof(*efx_mtd) + sizeof(efx_mtd->part[0]),
+				  GFP_KERNEL);
+		if (!efx_mtd)
+			return -ENOMEM;
+
+		efx_mtd->spi = spi;
+		efx_mtd->name = "flash";
+		efx_mtd->ops = &falcon_mtd_ops;
+
+		efx_mtd->n_parts = 1;
+		efx_mtd->part[0].mtd.type = MTD_NORFLASH;
+		efx_mtd->part[0].mtd.flags = MTD_CAP_NORFLASH;
+		efx_mtd->part[0].mtd.size = spi->size - FALCON_FLASH_BOOTCODE_START;
+		efx_mtd->part[0].mtd.erasesize = spi->erase_size;
+		efx_mtd->part[0].offset = FALCON_FLASH_BOOTCODE_START;
+		efx_mtd->part[0].type_name = "sfc_flash_bootrom";
+
+		rc = efx_mtd_probe_device(efx, efx_mtd);
+		if (rc) {
+			kfree(efx_mtd);
+			return rc;
+		}
+	}
 
-	efx_mtd->n_parts = 1;
-	efx_mtd->part[0].mtd.type = MTD_NORFLASH;
-	efx_mtd->part[0].mtd.flags = MTD_CAP_NORFLASH;
-	efx_mtd->part[0].mtd.size = spi->size - FALCON_FLASH_BOOTCODE_START;
-	efx_mtd->part[0].mtd.erasesize = spi->erase_size;
-	efx_mtd->part[0].offset = FALCON_FLASH_BOOTCODE_START;
-	efx_mtd->part[0].type_name = "sfc_flash_bootrom";
+	spi = &nic_data->spi_eeprom;
+	if (efx_spi_present(spi) && spi->size > EFX_EEPROM_BOOTCONFIG_START) {
+		efx_mtd = kzalloc(sizeof(*efx_mtd) + sizeof(efx_mtd->part[0]),
+				  GFP_KERNEL);
+		if (!efx_mtd)
+			return -ENOMEM;
+
+		efx_mtd->spi = spi;
+		efx_mtd->name = "EEPROM";
+		efx_mtd->ops = &falcon_mtd_ops;
+
+		efx_mtd->n_parts = 1;
+		efx_mtd->part[0].mtd.type = MTD_RAM;
+		efx_mtd->part[0].mtd.flags = MTD_CAP_RAM;
+		efx_mtd->part[0].mtd.size =
+			min(spi->size, EFX_EEPROM_BOOTCONFIG_END) -
+			EFX_EEPROM_BOOTCONFIG_START;
+		efx_mtd->part[0].mtd.erasesize = spi->erase_size;
+		efx_mtd->part[0].offset = EFX_EEPROM_BOOTCONFIG_START;
+		efx_mtd->part[0].type_name = "sfc_bootconfig";
+
+		rc = efx_mtd_probe_device(efx, efx_mtd);
+		if (rc) {
+			kfree(efx_mtd);
+			return rc;
+		}
+	}
 
-	rc = efx_mtd_probe_device(efx, efx_mtd);
-	if (rc)
-		kfree(efx_mtd);
 	return rc;
 }
 
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 0a7e26d73b5..bdce66ddf93 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -136,14 +136,19 @@ struct efx_tx_buffer {
  * @efx: The associated Efx NIC
  * @queue: DMA queue number
  * @channel: The associated channel
+ * @core_txq: The networking core TX queue structure
  * @buffer: The software buffer ring
  * @txd: The hardware descriptor ring
  * @ptr_mask: The size of the ring minus 1.
  * @flushed: Used when handling queue flushing
  * @read_count: Current read pointer.
  *	This is the number of buffers that have been removed from both rings.
- * @stopped: Stopped count.
- *	Set if this TX queue is currently stopping its port.
+ * @old_write_count: The value of @write_count when last checked.
+ *	This is here for performance reasons.  The xmit path will
+ *	only get the up-to-date value of @write_count if this
+ *	variable indicates that the queue is empty.  This is to
+ *	avoid cache-line ping-pong between the xmit path and the
+ *	completion path.
  * @insert_count: Current insert pointer
  *	This is the number of buffers that have been added to the
  *	software ring.
@@ -163,13 +168,17 @@ struct efx_tx_buffer {
  * @tso_long_headers: Number of packets with headers too long for standard
  *	blocks
  * @tso_packets: Number of packets via the TSO xmit path
+ * @pushes: Number of times the TX push feature has been used
+ * @empty_read_count: If the completion path has seen the queue as empty
+ *	and the transmission path has not yet checked this, the value of
+ *	@read_count bitwise-added to %EFX_EMPTY_COUNT_VALID; otherwise 0.
  */
 struct efx_tx_queue {
 	/* Members which don't change on the fast path */
 	struct efx_nic *efx ____cacheline_aligned_in_smp;
 	unsigned queue;
 	struct efx_channel *channel;
-	struct efx_nic *nic;
+	struct netdev_queue *core_txq;
 	struct efx_tx_buffer *buffer;
 	struct efx_special_buffer txd;
 	unsigned int ptr_mask;
@@ -177,7 +186,7 @@ struct efx_tx_queue {
 
 	/* Members used mainly on the completion path */
 	unsigned int read_count ____cacheline_aligned_in_smp;
-	int stopped;
+	unsigned int old_write_count;
 
 	/* Members used only on the xmit path */
 	unsigned int insert_count ____cacheline_aligned_in_smp;
@@ -187,6 +196,11 @@ struct efx_tx_queue {
 	unsigned int tso_bursts;
 	unsigned int tso_long_headers;
 	unsigned int tso_packets;
+	unsigned int pushes;
+
+	/* Members shared between paths and sometimes updated */
+	unsigned int empty_read_count ____cacheline_aligned_in_smp;
+#define EFX_EMPTY_COUNT_VALID 0x80000000
 };
 
 /**
@@ -305,7 +319,6 @@ enum efx_rx_alloc_method {
  * @irq_moderation: IRQ moderation value (in hardware ticks)
  * @napi_dev: Net device used with NAPI
  * @napi_str: NAPI control structure
- * @reset_work: Scheduled reset work thread
  * @work_pending: Is work pending via NAPI?
  * @eventq: Event queue buffer
  * @eventq_mask: Event queue pointer mask
@@ -326,8 +339,6 @@ enum efx_rx_alloc_method {
  * @n_rx_overlength: Count of RX_OVERLENGTH errors
  * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun
  * @rx_queue: RX queue for this channel
- * @tx_stop_count: Core TX queue stop count
- * @tx_stop_lock: Core TX queue stop lock
  * @tx_queue: TX queues for this channel
  */
 struct efx_channel {
@@ -366,10 +377,6 @@ struct efx_channel {
 	bool rx_pkt_csummed;
 
 	struct efx_rx_queue rx_queue;
-
-	atomic_t tx_stop_count;
-	spinlock_t tx_stop_lock;
-
 	struct efx_tx_queue tx_queue[2];
 };
 
@@ -621,14 +628,13 @@ struct efx_filter_state;
  * @pci_dev: The PCI device
  * @type: Controller type attributes
  * @legacy_irq: IRQ number
+ * @legacy_irq_enabled: Are IRQs enabled on NIC (INT_EN_KER register)?
  * @workqueue: Workqueue for port reconfigures and the HW monitor.
  *	Work items do not hold and must not acquire RTNL.
  * @workqueue_name: Name of workqueue
  * @reset_work: Scheduled reset workitem
- * @monitor_work: Hardware monitor workitem
  * @membase_phys: Memory BAR value as physical address
  * @membase: Memory BAR value
- * @biu_lock: BIU (bus interface unit) lock
  * @interrupt_mode: Interrupt mode
  * @irq_rx_adaptive: Adaptive IRQ moderation enabled for RX event queues
  * @irq_rx_moderation: IRQ moderation time for RX event queues
@@ -647,23 +653,14 @@ struct efx_filter_state;
  * @n_tx_channels: Number of channels used for TX
  * @rx_buffer_len: RX buffer length
  * @rx_buffer_order: Order (log2) of number of pages for each RX buffer
+ * @rx_hash_key: Toeplitz hash key for RSS
  * @rx_indir_table: Indirection table for RSS
  * @int_error_count: Number of internal errors seen recently
  * @int_error_expire: Time at which error count will be expired
  * @irq_status: Interrupt status buffer
- * @last_irq_cpu: Last CPU to handle interrupt.
- *	This register is written with the SMP processor ID whenever an
- *	interrupt is handled.  It is used by efx_nic_test_interrupt()
- *	to verify that an interrupt has occurred.
  * @irq_zero_count: Number of legacy IRQs seen with queue flags == 0
  * @fatal_irq_level: IRQ level (bit number) used for serious errors
- * @spi_flash: SPI flash device
- *	This field will be %NULL if no flash device is present (or for Siena).
- * @spi_eeprom: SPI EEPROM device
- *	This field will be %NULL if no EEPROM device is present (or for Siena).
- * @spi_lock: SPI bus lock
  * @mtd_list: List of MTDs attached to the NIC
- * @n_rx_nodesc_drop_cnt: RX no descriptor drop count
  * @nic_data: Hardware dependant state
  * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
  *	@port_inhibited, efx_monitor() and efx_reconfigure_port()
@@ -676,21 +673,14 @@ struct efx_filter_state;
  * @port_initialized: Port initialized?
  * @net_dev: Operating system network device. Consider holding the rtnl lock
  * @rx_checksum_enabled: RX checksumming enabled
- * @mac_stats: MAC statistics. These include all statistics the MACs
- *	can provide.  Generic code converts these into a standard
- *	&struct net_device_stats.
  * @stats_buffer: DMA buffer for statistics
- * @stats_lock: Statistics update lock. Serialises statistics fetches
  * @mac_op: MAC interface
- * @mac_address: Permanent MAC address
  * @phy_type: PHY type
- * @mdio_lock: MDIO lock
  * @phy_op: PHY interface
  * @phy_data: PHY private data (including PHY-specific stats)
  * @mdio: PHY MDIO interface
  * @mdio_bus: PHY MDIO bus ID (only used by Siena)
  * @phy_mode: PHY operating mode. Serialised by @mac_lock.
- * @xmac_poll_required: XMAC link state needs polling
  * @link_advertising: Autonegotiation advertising flags
  * @link_state: Current state of the link
  * @n_link_state_changes: Number of times the link has changed state
@@ -701,21 +691,34 @@ struct efx_filter_state;
  * @loopback_mode: Loopback status
  * @loopback_modes: Supported loopback mode bitmask
  * @loopback_selftest: Offline self-test private state
+ * @monitor_work: Hardware monitor workitem
+ * @biu_lock: BIU (bus interface unit) lock
+ * @last_irq_cpu: Last CPU to handle interrupt.
+ *	This register is written with the SMP processor ID whenever an
+ *	interrupt is handled.  It is used by efx_nic_test_interrupt()
+ *	to verify that an interrupt has occurred.
+ * @n_rx_nodesc_drop_cnt: RX no descriptor drop count
+ * @mac_stats: MAC statistics. These include all statistics the MACs
+ *	can provide.  Generic code converts these into a standard
+ *	&struct net_device_stats.
+ * @stats_lock: Statistics update lock. Serialises statistics fetches
  *
  * This is stored in the private area of the &struct net_device.
  */
 struct efx_nic {
+	/* The following fields should be written very rarely */
+
 	char name[IFNAMSIZ];
 	struct pci_dev *pci_dev;
 	const struct efx_nic_type *type;
 	int legacy_irq;
+	bool legacy_irq_enabled;
 	struct workqueue_struct *workqueue;
 	char workqueue_name[16];
 	struct work_struct reset_work;
-	struct delayed_work monitor_work;
 	resource_size_t membase_phys;
 	void __iomem *membase;
-	spinlock_t biu_lock;
+
 	enum efx_int_mode interrupt_mode;
 	bool irq_rx_adaptive;
 	unsigned int irq_rx_moderation;
@@ -742,19 +745,13 @@ struct efx_nic {
 	unsigned long int_error_expire;
 
 	struct efx_buffer irq_status;
-	volatile signed int last_irq_cpu;
 	unsigned irq_zero_count;
 	unsigned fatal_irq_level;
 
-	struct efx_spi_device *spi_flash;
-	struct efx_spi_device *spi_eeprom;
-	struct mutex spi_lock;
 #ifdef CONFIG_SFC_MTD
 	struct list_head mtd_list;
 #endif
 
-	unsigned n_rx_nodesc_drop_cnt;
-
 	void *nic_data;
 
 	struct mutex mac_lock;
@@ -766,22 +763,17 @@ struct efx_nic {
 	struct net_device *net_dev;
 	bool rx_checksum_enabled;
 
-	struct efx_mac_stats mac_stats;
 	struct efx_buffer stats_buffer;
-	spinlock_t stats_lock;
 
 	struct efx_mac_operations *mac_op;
-	unsigned char mac_address[ETH_ALEN];
 
 	unsigned int phy_type;
-	struct mutex mdio_lock;
 	struct efx_phy_operations *phy_op;
 	void *phy_data;
 	struct mdio_if_info mdio;
 	unsigned int mdio_bus;
 	enum efx_phy_mode phy_mode;
 
-	bool xmac_poll_required;
 	u32 link_advertising;
 	struct efx_link_state link_state;
 	unsigned int n_link_state_changes;
@@ -797,6 +789,15 @@ struct efx_nic {
 	void *loopback_selftest;
 
 	struct efx_filter_state *filter_state;
+
+	/* The following fields may be written more often */
+
+	struct delayed_work monitor_work ____cacheline_aligned_in_smp;
+	spinlock_t biu_lock;
+	volatile signed int last_irq_cpu;
+	unsigned n_rx_nodesc_drop_cnt;
+	struct efx_mac_stats mac_stats;
+	spinlock_t stats_lock;
 };
 
 static inline int efx_dev_registered(struct efx_nic *efx)
@@ -829,6 +830,7 @@ static inline unsigned int efx_port_num(struct efx_nic *efx)
  *	be called while the controller is uninitialised.
  * @probe_port: Probe the MAC and PHY
  * @remove_port: Free resources allocated by probe_port()
+ * @handle_global_event: Handle a "global" event (may be %NULL)
  * @prepare_flush: Prepare the hardware for flushing the DMA queues
  * @update_stats: Update statistics not provided by event handling
  * @start_stats: Start the regular fetching of statistics
@@ -873,6 +875,7 @@ struct efx_nic_type {
 	int (*reset)(struct efx_nic *efx, enum reset_type method);
 	int (*probe_port)(struct efx_nic *efx);
 	void (*remove_port)(struct efx_nic *efx);
+	bool (*handle_global_event)(struct efx_channel *channel, efx_qword_t *);
 	void (*prepare_flush)(struct efx_nic *efx);
 	void (*update_stats)(struct efx_nic *efx);
 	void (*start_stats)(struct efx_nic *efx);
diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
index 41c36b9a424..da386599ab6 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -362,6 +362,35 @@ static inline void efx_notify_tx_desc(struct efx_tx_queue *tx_queue)
 			FR_AZ_TX_DESC_UPD_DWORD_P0, tx_queue->queue);
 }
 
+/* Write pointer and first descriptor for TX descriptor ring */
+static inline void efx_push_tx_desc(struct efx_tx_queue *tx_queue,
+				    const efx_qword_t *txd)
+{
+	unsigned write_ptr;
+	efx_oword_t reg;
+
+	BUILD_BUG_ON(FRF_AZ_TX_DESC_LBN != 0);
+	BUILD_BUG_ON(FR_AA_TX_DESC_UPD_KER != FR_BZ_TX_DESC_UPD_P0);
+
+	write_ptr = tx_queue->write_count & tx_queue->ptr_mask;
+	EFX_POPULATE_OWORD_2(reg, FRF_AZ_TX_DESC_PUSH_CMD, true,
+			     FRF_AZ_TX_DESC_WPTR, write_ptr);
+	reg.qword[0] = *txd;
+	efx_writeo_page(tx_queue->efx, &reg,
+			FR_BZ_TX_DESC_UPD_P0, tx_queue->queue);
+}
+
+static inline bool
+efx_may_push_tx_desc(struct efx_tx_queue *tx_queue, unsigned int write_count)
+{
+	unsigned empty_read_count = ACCESS_ONCE(tx_queue->empty_read_count);
+
+	if (empty_read_count == 0)
+		return false;
+
+	tx_queue->empty_read_count = 0;
+	return ((empty_read_count ^ write_count) & ~EFX_EMPTY_COUNT_VALID) == 0;
+}
 
 /* For each entry inserted into the software descriptor ring, create a
  * descriptor in the hardware TX descriptor ring (in host memory), and
@@ -373,6 +402,7 @@ void efx_nic_push_buffers(struct efx_tx_queue *tx_queue)
 	struct efx_tx_buffer *buffer;
 	efx_qword_t *txd;
 	unsigned write_ptr;
+	unsigned old_write_count = tx_queue->write_count;
 
 	BUG_ON(tx_queue->write_count == tx_queue->insert_count);
 
@@ -391,7 +421,15 @@ void efx_nic_push_buffers(struct efx_tx_queue *tx_queue)
 	} while (tx_queue->write_count != tx_queue->insert_count);
 
 	wmb(); /* Ensure descriptors are written before they are fetched */
-	efx_notify_tx_desc(tx_queue);
+
+	if (efx_may_push_tx_desc(tx_queue, old_write_count)) {
+		txd = efx_tx_desc(tx_queue,
+				  old_write_count & tx_queue->ptr_mask);
+		efx_push_tx_desc(tx_queue, txd);
+		++tx_queue->pushes;
+	} else {
+		efx_notify_tx_desc(tx_queue);
+	}
 }
 
 /* Allocate hardware resources for a TX queue */
@@ -894,46 +932,6 @@ efx_handle_generated_event(struct efx_channel *channel, efx_qword_t *event)
 			  channel->channel, EFX_QWORD_VAL(*event));
 }
 
-/* Global events are basically PHY events */
-static void
-efx_handle_global_event(struct efx_channel *channel, efx_qword_t *event)
-{
-	struct efx_nic *efx = channel->efx;
-	bool handled = false;
-
-	if (EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_G_PHY0_INTR) ||
-	    EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_XG_PHY0_INTR) ||
-	    EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_XFP_PHY0_INTR)) {
-		/* Ignored */
-		handled = true;
-	}
-
-	if ((efx_nic_rev(efx) >= EFX_REV_FALCON_B0) &&
-	    EFX_QWORD_FIELD(*event, FSF_BB_GLB_EV_XG_MGT_INTR)) {
-		efx->xmac_poll_required = true;
-		handled = true;
-	}
-
-	if (efx_nic_rev(efx) <= EFX_REV_FALCON_A1 ?
-	    EFX_QWORD_FIELD(*event, FSF_AA_GLB_EV_RX_RECOVERY) :
-	    EFX_QWORD_FIELD(*event, FSF_BB_GLB_EV_RX_RECOVERY)) {
-		netif_err(efx, rx_err, efx->net_dev,
-			  "channel %d seen global RX_RESET event. Resetting.\n",
-			  channel->channel);
-
-		atomic_inc(&efx->rx_reset);
-		efx_schedule_reset(efx, EFX_WORKAROUND_6555(efx) ?
-				   RESET_TYPE_RX_RECOVERY : RESET_TYPE_DISABLE);
-		handled = true;
-	}
-
-	if (!handled)
-		netif_err(efx, hw, efx->net_dev,
-			  "channel %d unknown global event "
-			  EFX_QWORD_FMT "\n", channel->channel,
-			  EFX_QWORD_VAL(*event));
-}
-
 static void
 efx_handle_driver_event(struct efx_channel *channel, efx_qword_t *event)
 {
@@ -1050,15 +1048,17 @@ int efx_nic_process_eventq(struct efx_channel *channel, int budget)
 		case FSE_AZ_EV_CODE_DRV_GEN_EV:
 			efx_handle_generated_event(channel, &event);
 			break;
-		case FSE_AZ_EV_CODE_GLOBAL_EV:
-			efx_handle_global_event(channel, &event);
-			break;
 		case FSE_AZ_EV_CODE_DRIVER_EV:
 			efx_handle_driver_event(channel, &event);
 			break;
 		case FSE_CZ_EV_CODE_MCDI_EV:
 			efx_mcdi_process_event(channel, &event);
 			break;
+		case FSE_AZ_EV_CODE_GLOBAL_EV:
+			if (efx->type->handle_global_event &&
+			    efx->type->handle_global_event(channel, &event))
+				break;
+			/* else fall through */
 		default:
 			netif_err(channel->efx, hw, channel->efx->net_dev,
 				  "channel %d unknown event type %d (data "
@@ -1418,6 +1418,12 @@ static irqreturn_t efx_legacy_interrupt(int irq, void *dev_id)
 	u32 queues;
 	int syserr;
 
+	/* Could this be ours?  If interrupts are disabled then the
+	 * channel state may not be valid.
+	 */
+	if (!efx->legacy_irq_enabled)
+		return result;
+
 	/* Read the ISR which also ACKs the interrupts */
 	efx_readd(efx, &reg, FR_BZ_INT_ISR0);
 	queues = EFX_EXTRACT_DWORD(reg, 0, 31);
@@ -1664,7 +1670,7 @@ void efx_nic_init_common(struct efx_nic *efx)
 	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_RX_SPACER, 0xfe);
 	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_RX_SPACER_EN, 1);
 	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_ONE_PKT_PER_Q, 1);
-	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PUSH_EN, 0);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PUSH_EN, 1);
 	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_DIS_NON_IP_EV, 1);
 	/* Enable SW_EV to inherit in char driver - assume harmless here */
 	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_SOFT_EVT_EN, 1);
diff --git a/drivers/net/sfc/nic.h b/drivers/net/sfc/nic.h
index 0438dc98722..eb0586925b5 100644
--- a/drivers/net/sfc/nic.h
+++ b/drivers/net/sfc/nic.h
@@ -15,6 +15,7 @@
 #include "net_driver.h"
 #include "efx.h"
 #include "mcdi.h"
+#include "spi.h"
 
 /*
  * Falcon hardware control
@@ -113,6 +114,11 @@ struct falcon_board {
  * @stats_pending: Is there a pending DMA of MAC statistics.
  * @stats_timer: A timer for regularly fetching MAC statistics.
  * @stats_dma_done: Pointer to the flag which indicates DMA completion.
+ * @spi_flash: SPI flash device
+ * @spi_eeprom: SPI EEPROM device
+ * @spi_lock: SPI bus lock
+ * @mdio_lock: MDIO bus lock
+ * @xmac_poll_required: XMAC link state needs polling
  */
 struct falcon_nic_data {
 	struct pci_dev *pci_dev2;
@@ -121,6 +127,11 @@ struct falcon_nic_data {
 	bool stats_pending;
 	struct timer_list stats_timer;
 	u32 *stats_dma_done;
+	struct efx_spi_device spi_flash;
+	struct efx_spi_device spi_eeprom;
+	struct mutex spi_lock;
+	struct mutex mdio_lock;
+	bool xmac_poll_required;
 };
 
 static inline struct falcon_board *falcon_board(struct efx_nic *efx)
@@ -135,7 +146,6 @@ static inline struct falcon_board *falcon_board(struct efx_nic *efx)
  * @fw_build: Firmware build number
  * @mcdi: Management-Controller-to-Driver Interface
  * @wol_filter_id: Wake-on-LAN packet filter id
- * @ipv6_rss_key: Toeplitz hash key for IPv6 RSS
  */
 struct siena_nic_data {
 	u64 fw_version;
diff --git a/drivers/net/sfc/qt202x_phy.c b/drivers/net/sfc/qt202x_phy.c
index 68813d1d85f..ea3ae008931 100644
--- a/drivers/net/sfc/qt202x_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -41,6 +41,8 @@
 #define PCS_UC_STATUS_LBN	0
 #define PCS_UC_STATUS_WIDTH	8
 #define PCS_UC_STATUS_FW_SAVE	0x20
+#define PMA_PMD_MODE_REG	0xc301
+#define PMA_PMD_RXIN_SEL_LBN	6
 #define PMA_PMD_FTX_CTRL2_REG	0xc309
 #define PMA_PMD_FTX_STATIC_LBN	13
 #define PMA_PMD_VEND1_REG	0xc001
@@ -282,6 +284,10 @@ static int qt2025c_select_phy_mode(struct efx_nic *efx)
 	 * slow) reload of the firmware image (the microcontroller's code
 	 * memory is not affected by the microcontroller reset). */
 	efx_mdio_write(efx, 1, 0xc317, 0x00ff);
+	/* PMA/PMD loopback sets RXIN to inverse polarity and the firmware
+	 * restart doesn't reset it. We need to do that ourselves. */
+	efx_mdio_set_flag(efx, 1, PMA_PMD_MODE_REG,
+			  1 << PMA_PMD_RXIN_SEL_LBN, false);
 	efx_mdio_write(efx, 1, 0xc300, 0x0002);
 	msleep(20);
 
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 6d0959b5158..3925fd62117 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -37,7 +37,7 @@
  * This driver supports two methods for allocating and using RX buffers:
  * each RX buffer may be backed by an skb or by an order-n page.
  *
- * When LRO is in use then the second method has a lower overhead,
+ * When GRO is in use then the second method has a lower overhead,
  * since we don't have to allocate then free skbs on reassembled frames.
  *
  * Values:
@@ -50,25 +50,25 @@
  *
  *   - Since pushing and popping descriptors are separated by the rx_queue
  *     size, so the watermarks should be ~rxd_size.
- *   - The performance win by using page-based allocation for LRO is less
- *     than the performance hit of using page-based allocation of non-LRO,
+ *   - The performance win by using page-based allocation for GRO is less
+ *     than the performance hit of using page-based allocation of non-GRO,
  *     so the watermarks should reflect this.
  *
  * Per channel we maintain a single variable, updated by each channel:
  *
- *   rx_alloc_level += (lro_performed ? RX_ALLOC_FACTOR_LRO :
+ *   rx_alloc_level += (gro_performed ? RX_ALLOC_FACTOR_GRO :
  *                      RX_ALLOC_FACTOR_SKB)
  * Per NAPI poll interval, we constrain rx_alloc_level to 0..MAX (which
  * limits the hysteresis), and update the allocation strategy:
  *
- *   rx_alloc_method = (rx_alloc_level > RX_ALLOC_LEVEL_LRO ?
+ *   rx_alloc_method = (rx_alloc_level > RX_ALLOC_LEVEL_GRO ?
  *                      RX_ALLOC_METHOD_PAGE : RX_ALLOC_METHOD_SKB)
  */
 static int rx_alloc_method = RX_ALLOC_METHOD_AUTO;
 
-#define RX_ALLOC_LEVEL_LRO 0x2000
+#define RX_ALLOC_LEVEL_GRO 0x2000
 #define RX_ALLOC_LEVEL_MAX 0x3000
-#define RX_ALLOC_FACTOR_LRO 1
+#define RX_ALLOC_FACTOR_GRO 1
 #define RX_ALLOC_FACTOR_SKB (-2)
 
 /* This is the percentage fill level below which new RX descriptors
@@ -441,19 +441,19 @@ static void efx_rx_packet__check_len(struct efx_rx_queue *rx_queue,
 	efx_rx_queue_channel(rx_queue)->n_rx_overlength++;
 }
 
-/* Pass a received packet up through the generic LRO stack
+/* Pass a received packet up through the generic GRO stack
  *
  * Handles driverlink veto, and passes the fragment up via
- * the appropriate LRO method
+ * the appropriate GRO method
  */
-static void efx_rx_packet_lro(struct efx_channel *channel,
+static void efx_rx_packet_gro(struct efx_channel *channel,
 			      struct efx_rx_buffer *rx_buf,
 			      bool checksummed)
 {
 	struct napi_struct *napi = &channel->napi_str;
 	gro_result_t gro_result;
 
-	/* Pass the skb/page into the LRO engine */
+	/* Pass the skb/page into the GRO engine */
 	if (rx_buf->page) {
 		struct efx_nic *efx = channel->efx;
 		struct page *page = rx_buf->page;
@@ -499,7 +499,7 @@ static void efx_rx_packet_lro(struct efx_channel *channel,
 	if (gro_result == GRO_NORMAL) {
 		channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB;
 	} else if (gro_result != GRO_DROP) {
-		channel->rx_alloc_level += RX_ALLOC_FACTOR_LRO;
+		channel->rx_alloc_level += RX_ALLOC_FACTOR_GRO;
 		channel->irq_mod_score += 2;
 	}
 }
@@ -605,7 +605,7 @@ void __efx_rx_packet(struct efx_channel *channel,
 	}
 
 	if (likely(checksummed || rx_buf->page)) {
-		efx_rx_packet_lro(channel, rx_buf, checksummed);
+		efx_rx_packet_gro(channel, rx_buf, checksummed);
 		return;
 	}
 
@@ -628,7 +628,7 @@ void efx_rx_strategy(struct efx_channel *channel)
 {
 	enum efx_rx_alloc_method method = rx_alloc_method;
 
-	/* Only makes sense to use page based allocation if LRO is enabled */
+	/* Only makes sense to use page based allocation if GRO is enabled */
 	if (!(channel->efx->net_dev->features & NETIF_F_GRO)) {
 		method = RX_ALLOC_METHOD_SKB;
 	} else if (method == RX_ALLOC_METHOD_AUTO) {
@@ -639,7 +639,7 @@ void efx_rx_strategy(struct efx_channel *channel)
 			channel->rx_alloc_level = RX_ALLOC_LEVEL_MAX;
 
 		/* Decide on the allocation method */
-		method = ((channel->rx_alloc_level > RX_ALLOC_LEVEL_LRO) ?
+		method = ((channel->rx_alloc_level > RX_ALLOC_LEVEL_GRO) ?
 			  RX_ALLOC_METHOD_PAGE : RX_ALLOC_METHOD_SKB);
 	}
 
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index 45236f58a25..bf845617644 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -194,13 +194,7 @@ static int siena_reset_hw(struct efx_nic *efx, enum reset_type method)
 
 static int siena_probe_nvconfig(struct efx_nic *efx)
 {
-	int rc;
-
-	rc = efx_mcdi_get_board_cfg(efx, efx->mac_address, NULL);
-	if (rc)
-		return rc;
-
-	return 0;
+	return efx_mcdi_get_board_cfg(efx, efx->net_dev->perm_addr, NULL);
 }
 
 static int siena_probe_nic(struct efx_nic *efx)
@@ -562,7 +556,7 @@ static int siena_set_wol(struct efx_nic *efx, u32 type)
 		if (nic_data->wol_filter_id != -1)
 			efx_mcdi_wol_filter_remove(efx,
 						   nic_data->wol_filter_id);
-		rc = efx_mcdi_wol_filter_set_magic(efx, efx->mac_address,
+		rc = efx_mcdi_wol_filter_set_magic(efx, efx->net_dev->dev_addr,
 						   &nic_data->wol_filter_id);
 		if (rc)
 			goto fail;
diff --git a/drivers/net/sfc/spi.h b/drivers/net/sfc/spi.h
index 8bf4fce0813..879b7f6bde3 100644
--- a/drivers/net/sfc/spi.h
+++ b/drivers/net/sfc/spi.h
@@ -61,6 +61,11 @@ struct efx_spi_device {
 	unsigned int block_size;
 };
 
+static inline bool efx_spi_present(const struct efx_spi_device *spi)
+{
+	return spi->size != 0;
+}
+
 int falcon_spi_cmd(struct efx_nic *efx,
 		   const struct efx_spi_device *spi, unsigned int command,
 		   int address, const void* in, void *out, size_t len);
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index 1bc6c48c96e..f102912eba9 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -15,9 +15,7 @@
 #include "mdio_10g.h"
 #include "nic.h"
 #include "phy.h"
-#include "regs.h"
 #include "workarounds.h"
-#include "selftest.h"
 
 /* We expect these MMDs to be in the package. */
 #define TENXPRESS_REQUIRED_DEVS (MDIO_DEVS_PMAPMD	| \
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index 11726989fe2..2f5e9da657b 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -30,50 +30,6 @@
  */
 #define EFX_TXQ_THRESHOLD(_efx) ((_efx)->txq_entries / 2u)
 
-/* We need to be able to nest calls to netif_tx_stop_queue(), partly
- * because of the 2 hardware queues associated with each core queue,
- * but also so that we can inhibit TX for reasons other than a full
- * hardware queue. */
-void efx_stop_queue(struct efx_channel *channel)
-{
-	struct efx_nic *efx = channel->efx;
-	struct efx_tx_queue *tx_queue = efx_channel_get_tx_queue(channel, 0);
-
-	if (!tx_queue)
-		return;
-
-	spin_lock_bh(&channel->tx_stop_lock);
-	netif_vdbg(efx, tx_queued, efx->net_dev, "stop TX queue\n");
-
-	atomic_inc(&channel->tx_stop_count);
-	netif_tx_stop_queue(
-		netdev_get_tx_queue(efx->net_dev,
-				    tx_queue->queue / EFX_TXQ_TYPES));
-
-	spin_unlock_bh(&channel->tx_stop_lock);
-}
-
-/* Decrement core TX queue stop count and wake it if the count is 0 */
-void efx_wake_queue(struct efx_channel *channel)
-{
-	struct efx_nic *efx = channel->efx;
-	struct efx_tx_queue *tx_queue = efx_channel_get_tx_queue(channel, 0);
-
-	if (!tx_queue)
-		return;
-
-	local_bh_disable();
-	if (atomic_dec_and_lock(&channel->tx_stop_count,
-				&channel->tx_stop_lock)) {
-		netif_vdbg(efx, tx_queued, efx->net_dev, "waking TX queue\n");
-		netif_tx_wake_queue(
-			netdev_get_tx_queue(efx->net_dev,
-					    tx_queue->queue / EFX_TXQ_TYPES));
-		spin_unlock(&channel->tx_stop_lock);
-	}
-	local_bh_enable();
-}
-
 static void efx_dequeue_buffer(struct efx_tx_queue *tx_queue,
 			       struct efx_tx_buffer *buffer)
 {
@@ -234,21 +190,22 @@ netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb)
 				 * checked.  Update the xmit path's
 				 * copy of read_count.
 				 */
-				++tx_queue->stopped;
+				netif_tx_stop_queue(tx_queue->core_txq);
 				/* This memory barrier protects the
-				 * change of stopped from the access
+				 * change of queue state from the access
 				 * of read_count. */
 				smp_mb();
 				tx_queue->old_read_count =
-					*(volatile unsigned *)
-					&tx_queue->read_count;
+					ACCESS_ONCE(tx_queue->read_count);
 				fill_level = (tx_queue->insert_count
 					      - tx_queue->old_read_count);
 				q_space = efx->txq_entries - 1 - fill_level;
-				if (unlikely(q_space-- <= 0))
-					goto stop;
+				if (unlikely(q_space-- <= 0)) {
+					rc = NETDEV_TX_BUSY;
+					goto unwind;
+				}
 				smp_mb();
-				--tx_queue->stopped;
+				netif_tx_start_queue(tx_queue->core_txq);
 			}
 
 			insert_ptr = tx_queue->insert_count & tx_queue->ptr_mask;
@@ -308,13 +265,6 @@ netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb)
 
 	/* Mark the packet as transmitted, and free the SKB ourselves */
 	dev_kfree_skb_any(skb);
-	goto unwind;
-
- stop:
-	rc = NETDEV_TX_BUSY;
-
-	if (tx_queue->stopped == 1)
-		efx_stop_queue(tx_queue->channel);
 
  unwind:
 	/* Work backwards until we hit the original insert pointer value */
@@ -407,22 +357,25 @@ void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index)
 	efx_dequeue_buffers(tx_queue, index);
 
 	/* See if we need to restart the netif queue.  This barrier
-	 * separates the update of read_count from the test of
-	 * stopped. */
+	 * separates the update of read_count from the test of the
+	 * queue state. */
 	smp_mb();
-	if (unlikely(tx_queue->stopped) && likely(efx->port_enabled)) {
+	if (unlikely(netif_tx_queue_stopped(tx_queue->core_txq)) &&
+	    likely(efx->port_enabled)) {
 		fill_level = tx_queue->insert_count - tx_queue->read_count;
 		if (fill_level < EFX_TXQ_THRESHOLD(efx)) {
 			EFX_BUG_ON_PARANOID(!efx_dev_registered(efx));
+			netif_tx_wake_queue(tx_queue->core_txq);
+		}
+	}
 
-			/* Do this under netif_tx_lock(), to avoid racing
-			 * with efx_xmit(). */
-			netif_tx_lock(efx->net_dev);
-			if (tx_queue->stopped) {
-				tx_queue->stopped = 0;
-				efx_wake_queue(tx_queue->channel);
-			}
-			netif_tx_unlock(efx->net_dev);
+	/* Check whether the hardware queue is now empty */
+	if ((int)(tx_queue->read_count - tx_queue->old_write_count) >= 0) {
+		tx_queue->old_write_count = ACCESS_ONCE(tx_queue->write_count);
+		if (tx_queue->read_count == tx_queue->old_write_count) {
+			smp_mb();
+			tx_queue->empty_read_count =
+				tx_queue->read_count | EFX_EMPTY_COUNT_VALID;
 		}
 	}
 }
@@ -470,9 +423,10 @@ void efx_init_tx_queue(struct efx_tx_queue *tx_queue)
 
 	tx_queue->insert_count = 0;
 	tx_queue->write_count = 0;
+	tx_queue->old_write_count = 0;
 	tx_queue->read_count = 0;
 	tx_queue->old_read_count = 0;
-	BUG_ON(tx_queue->stopped);
+	tx_queue->empty_read_count = 0 | EFX_EMPTY_COUNT_VALID;
 
 	/* Set up TX descriptor ring */
 	efx_nic_init_tx(tx_queue);
@@ -508,12 +462,6 @@ void efx_fini_tx_queue(struct efx_tx_queue *tx_queue)
 
 	/* Free up TSO header cache */
 	efx_fini_tso(tx_queue);
-
-	/* Release queue's stop on port, if any */
-	if (tx_queue->stopped) {
-		tx_queue->stopped = 0;
-		efx_wake_queue(tx_queue->channel);
-	}
 }
 
 void efx_remove_tx_queue(struct efx_tx_queue *tx_queue)
@@ -755,12 +703,12 @@ static int efx_tx_queue_insert(struct efx_tx_queue *tx_queue,
 			 * since the xmit path last checked.  Update
 			 * the xmit path's copy of read_count.
 			 */
-			++tx_queue->stopped;
+			netif_tx_stop_queue(tx_queue->core_txq);
 			/* This memory barrier protects the change of
-			 * stopped from the access of read_count. */
+			 * queue state from the access of read_count. */
 			smp_mb();
 			tx_queue->old_read_count =
-				*(volatile unsigned *)&tx_queue->read_count;
+				ACCESS_ONCE(tx_queue->read_count);
 			fill_level = (tx_queue->insert_count
 				      - tx_queue->old_read_count);
 			q_space = efx->txq_entries - 1 - fill_level;
@@ -769,7 +717,7 @@ static int efx_tx_queue_insert(struct efx_tx_queue *tx_queue,
 				return 1;
 			}
 			smp_mb();
-			--tx_queue->stopped;
+			netif_tx_start_queue(tx_queue->core_txq);
 		}
 
 		insert_ptr = tx_queue->insert_count & tx_queue->ptr_mask;
@@ -1109,8 +1057,10 @@ static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue,
 
 	while (1) {
 		rc = tso_fill_packet_with_fragment(tx_queue, skb, &state);
-		if (unlikely(rc))
-			goto stop;
+		if (unlikely(rc)) {
+			rc2 = NETDEV_TX_BUSY;
+			goto unwind;
+		}
 
 		/* Move onto the next fragment? */
 		if (state.in_len == 0) {
@@ -1139,14 +1089,6 @@ static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue,
 	netif_err(efx, tx_err, efx->net_dev,
 		  "Out of memory for TSO headers, or PCI mapping error\n");
 	dev_kfree_skb_any(skb);
-	goto unwind;
-
- stop:
-	rc2 = NETDEV_TX_BUSY;
-
-	/* Stop the queue if it wasn't stopped before. */
-	if (tx_queue->stopped == 1)
-		efx_stop_queue(tx_queue->channel);
 
  unwind:
 	/* Free the DMA mapping we were in the process of writing out */
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 50259dfec58..819c1750e2a 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -45,9 +45,9 @@ static void sh_eth_set_duplex(struct net_device *ndev)
 	u32 ioaddr = ndev->base_addr;
 
 	if (mdp->duplex) /* Full */
-		ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM, ioaddr + ECMR);
+		writel(readl(ioaddr + ECMR) | ECMR_DM, ioaddr + ECMR);
 	else		/* Half */
-		ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM, ioaddr + ECMR);
+		writel(readl(ioaddr + ECMR) & ~ECMR_DM, ioaddr + ECMR);
 }
 
 static void sh_eth_set_rate(struct net_device *ndev)
@@ -57,10 +57,10 @@ static void sh_eth_set_rate(struct net_device *ndev)
 
 	switch (mdp->speed) {
 	case 10: /* 10BASE */
-		ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_RTM, ioaddr + ECMR);
+		writel(readl(ioaddr + ECMR) & ~ECMR_RTM, ioaddr + ECMR);
 		break;
 	case 100:/* 100BASE */
-		ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_RTM, ioaddr + ECMR);
+		writel(readl(ioaddr + ECMR) | ECMR_RTM, ioaddr + ECMR);
 		break;
 	default:
 		break;
@@ -96,9 +96,9 @@ static void sh_eth_set_duplex(struct net_device *ndev)
 	u32 ioaddr = ndev->base_addr;
 
 	if (mdp->duplex) /* Full */
-		ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM, ioaddr + ECMR);
+		writel(readl(ioaddr + ECMR) | ECMR_DM, ioaddr + ECMR);
 	else		/* Half */
-		ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM, ioaddr + ECMR);
+		writel(readl(ioaddr + ECMR) & ~ECMR_DM, ioaddr + ECMR);
 }
 
 static void sh_eth_set_rate(struct net_device *ndev)
@@ -108,10 +108,10 @@ static void sh_eth_set_rate(struct net_device *ndev)
 
 	switch (mdp->speed) {
 	case 10: /* 10BASE */
-		ctrl_outl(0, ioaddr + RTRATE);
+		writel(0, ioaddr + RTRATE);
 		break;
 	case 100:/* 100BASE */
-		ctrl_outl(1, ioaddr + RTRATE);
+		writel(1, ioaddr + RTRATE);
 		break;
 	default:
 		break;
@@ -143,7 +143,7 @@ static struct sh_eth_cpu_data sh_eth_my_cpu_data = {
 static void sh_eth_chip_reset(struct net_device *ndev)
 {
 	/* reset device */
-	ctrl_outl(ARSTR_ARSTR, ARSTR);
+	writel(ARSTR_ARSTR, ARSTR);
 	mdelay(1);
 }
 
@@ -152,10 +152,10 @@ static void sh_eth_reset(struct net_device *ndev)
 	u32 ioaddr = ndev->base_addr;
 	int cnt = 100;
 
-	ctrl_outl(EDSR_ENALL, ioaddr + EDSR);
-	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
+	writel(EDSR_ENALL, ioaddr + EDSR);
+	writel(readl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
 	while (cnt > 0) {
-		if (!(ctrl_inl(ioaddr + EDMR) & 0x3))
+		if (!(readl(ioaddr + EDMR) & 0x3))
 			break;
 		mdelay(1);
 		cnt--;
@@ -164,14 +164,14 @@ static void sh_eth_reset(struct net_device *ndev)
 		printk(KERN_ERR "Device reset fail\n");
 
 	/* Table Init */
-	ctrl_outl(0x0, ioaddr + TDLAR);
-	ctrl_outl(0x0, ioaddr + TDFAR);
-	ctrl_outl(0x0, ioaddr + TDFXR);
-	ctrl_outl(0x0, ioaddr + TDFFR);
-	ctrl_outl(0x0, ioaddr + RDLAR);
-	ctrl_outl(0x0, ioaddr + RDFAR);
-	ctrl_outl(0x0, ioaddr + RDFXR);
-	ctrl_outl(0x0, ioaddr + RDFFR);
+	writel(0x0, ioaddr + TDLAR);
+	writel(0x0, ioaddr + TDFAR);
+	writel(0x0, ioaddr + TDFXR);
+	writel(0x0, ioaddr + TDFFR);
+	writel(0x0, ioaddr + RDLAR);
+	writel(0x0, ioaddr + RDFAR);
+	writel(0x0, ioaddr + RDFXR);
+	writel(0x0, ioaddr + RDFFR);
 }
 
 static void sh_eth_set_duplex(struct net_device *ndev)
@@ -180,9 +180,9 @@ static void sh_eth_set_duplex(struct net_device *ndev)
 	u32 ioaddr = ndev->base_addr;
 
 	if (mdp->duplex) /* Full */
-		ctrl_outl(ctrl_inl(ioaddr + ECMR) | ECMR_DM, ioaddr + ECMR);
+		writel(readl(ioaddr + ECMR) | ECMR_DM, ioaddr + ECMR);
 	else		/* Half */
-		ctrl_outl(ctrl_inl(ioaddr + ECMR) & ~ECMR_DM, ioaddr + ECMR);
+		writel(readl(ioaddr + ECMR) & ~ECMR_DM, ioaddr + ECMR);
 }
 
 static void sh_eth_set_rate(struct net_device *ndev)
@@ -192,13 +192,13 @@ static void sh_eth_set_rate(struct net_device *ndev)
 
 	switch (mdp->speed) {
 	case 10: /* 10BASE */
-		ctrl_outl(GECMR_10, ioaddr + GECMR);
+		writel(GECMR_10, ioaddr + GECMR);
 		break;
 	case 100:/* 100BASE */
-		ctrl_outl(GECMR_100, ioaddr + GECMR);
+		writel(GECMR_100, ioaddr + GECMR);
 		break;
 	case 1000: /* 1000BASE */
-		ctrl_outl(GECMR_1000, ioaddr + GECMR);
+		writel(GECMR_1000, ioaddr + GECMR);
 		break;
 	default:
 		break;
@@ -283,9 +283,9 @@ static void sh_eth_reset(struct net_device *ndev)
 {
 	u32 ioaddr = ndev->base_addr;
 
-	ctrl_outl(ctrl_inl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
+	writel(readl(ioaddr + EDMR) | EDMR_SRST, ioaddr + EDMR);
 	mdelay(3);
-	ctrl_outl(ctrl_inl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR);
+	writel(readl(ioaddr + EDMR) & ~EDMR_SRST, ioaddr + EDMR);
 }
 #endif
 
@@ -336,10 +336,10 @@ static void update_mac_address(struct net_device *ndev)
 {
 	u32 ioaddr = ndev->base_addr;
 
-	ctrl_outl((ndev->dev_addr[0] << 24) | (ndev->dev_addr[1] << 16) |
+	writel((ndev->dev_addr[0] << 24) | (ndev->dev_addr[1] << 16) |
 		  (ndev->dev_addr[2] << 8) | (ndev->dev_addr[3]),
 		  ioaddr + MAHR);
-	ctrl_outl((ndev->dev_addr[4] << 8) | (ndev->dev_addr[5]),
+	writel((ndev->dev_addr[4] << 8) | (ndev->dev_addr[5]),
 		  ioaddr + MALR);
 }
 
@@ -358,12 +358,12 @@ static void read_mac_address(struct net_device *ndev, unsigned char *mac)
 	if (mac[0] || mac[1] || mac[2] || mac[3] || mac[4] || mac[5]) {
 		memcpy(ndev->dev_addr, mac, 6);
 	} else {
-		ndev->dev_addr[0] = (ctrl_inl(ioaddr + MAHR) >> 24);
-		ndev->dev_addr[1] = (ctrl_inl(ioaddr + MAHR) >> 16) & 0xFF;
-		ndev->dev_addr[2] = (ctrl_inl(ioaddr + MAHR) >> 8) & 0xFF;
-		ndev->dev_addr[3] = (ctrl_inl(ioaddr + MAHR) & 0xFF);
-		ndev->dev_addr[4] = (ctrl_inl(ioaddr + MALR) >> 8) & 0xFF;
-		ndev->dev_addr[5] = (ctrl_inl(ioaddr + MALR) & 0xFF);
+		ndev->dev_addr[0] = (readl(ioaddr + MAHR) >> 24);
+		ndev->dev_addr[1] = (readl(ioaddr + MAHR) >> 16) & 0xFF;
+		ndev->dev_addr[2] = (readl(ioaddr + MAHR) >> 8) & 0xFF;
+		ndev->dev_addr[3] = (readl(ioaddr + MAHR) & 0xFF);
+		ndev->dev_addr[4] = (readl(ioaddr + MALR) >> 8) & 0xFF;
+		ndev->dev_addr[5] = (readl(ioaddr + MALR) & 0xFF);
 	}
 }
 
@@ -379,19 +379,19 @@ struct bb_info {
 /* PHY bit set */
 static void bb_set(u32 addr, u32 msk)
 {
-	ctrl_outl(ctrl_inl(addr) | msk, addr);
+	writel(readl(addr) | msk, addr);
 }
 
 /* PHY bit clear */
 static void bb_clr(u32 addr, u32 msk)
 {
-	ctrl_outl((ctrl_inl(addr) & ~msk), addr);
+	writel((readl(addr) & ~msk), addr);
 }
 
 /* PHY bit read */
 static int bb_read(u32 addr, u32 msk)
 {
-	return (ctrl_inl(addr) & msk) != 0;
+	return (readl(addr) & msk) != 0;
 }
 
 /* Data I/O pin control */
@@ -506,9 +506,9 @@ static void sh_eth_ring_format(struct net_device *ndev)
 		rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
 		/* Rx descriptor address set */
 		if (i == 0) {
-			ctrl_outl(mdp->rx_desc_dma, ioaddr + RDLAR);
+			writel(mdp->rx_desc_dma, ioaddr + RDLAR);
 #if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			ctrl_outl(mdp->rx_desc_dma, ioaddr + RDFAR);
+			writel(mdp->rx_desc_dma, ioaddr + RDFAR);
 #endif
 		}
 	}
@@ -528,9 +528,9 @@ static void sh_eth_ring_format(struct net_device *ndev)
 		txdesc->buffer_length = 0;
 		if (i == 0) {
 			/* Tx descriptor address set */
-			ctrl_outl(mdp->tx_desc_dma, ioaddr + TDLAR);
+			writel(mdp->tx_desc_dma, ioaddr + TDLAR);
 #if defined(CONFIG_CPU_SUBTYPE_SH7763)
-			ctrl_outl(mdp->tx_desc_dma, ioaddr + TDFAR);
+			writel(mdp->tx_desc_dma, ioaddr + TDFAR);
 #endif
 		}
 	}
@@ -623,71 +623,71 @@ static int sh_eth_dev_init(struct net_device *ndev)
 	/* Descriptor format */
 	sh_eth_ring_format(ndev);
 	if (mdp->cd->rpadir)
-		ctrl_outl(mdp->cd->rpadir_value, ioaddr + RPADIR);
+		writel(mdp->cd->rpadir_value, ioaddr + RPADIR);
 
 	/* all sh_eth int mask */
-	ctrl_outl(0, ioaddr + EESIPR);
+	writel(0, ioaddr + EESIPR);
 
 #if defined(__LITTLE_ENDIAN__)
 	if (mdp->cd->hw_swap)
-		ctrl_outl(EDMR_EL, ioaddr + EDMR);
+		writel(EDMR_EL, ioaddr + EDMR);
 	else
 #endif
-		ctrl_outl(0, ioaddr + EDMR);
+		writel(0, ioaddr + EDMR);
 
 	/* FIFO size set */
-	ctrl_outl(mdp->cd->fdr_value, ioaddr + FDR);
-	ctrl_outl(0, ioaddr + TFTR);
+	writel(mdp->cd->fdr_value, ioaddr + FDR);
+	writel(0, ioaddr + TFTR);
 
 	/* Frame recv control */
-	ctrl_outl(mdp->cd->rmcr_value, ioaddr + RMCR);
+	writel(mdp->cd->rmcr_value, ioaddr + RMCR);
 
 	rx_int_var = mdp->rx_int_var = DESC_I_RINT8 | DESC_I_RINT5;
 	tx_int_var = mdp->tx_int_var = DESC_I_TINT2;
-	ctrl_outl(rx_int_var | tx_int_var, ioaddr + TRSCER);
+	writel(rx_int_var | tx_int_var, ioaddr + TRSCER);
 
 	if (mdp->cd->bculr)
-		ctrl_outl(0x800, ioaddr + BCULR);	/* Burst sycle set */
+		writel(0x800, ioaddr + BCULR);	/* Burst sycle set */
 
-	ctrl_outl(mdp->cd->fcftr_value, ioaddr + FCFTR);
+	writel(mdp->cd->fcftr_value, ioaddr + FCFTR);
 
 	if (!mdp->cd->no_trimd)
-		ctrl_outl(0, ioaddr + TRIMD);
+		writel(0, ioaddr + TRIMD);
 
 	/* Recv frame limit set register */
-	ctrl_outl(RFLR_VALUE, ioaddr + RFLR);
+	writel(RFLR_VALUE, ioaddr + RFLR);
 
-	ctrl_outl(ctrl_inl(ioaddr + EESR), ioaddr + EESR);
-	ctrl_outl(mdp->cd->eesipr_value, ioaddr + EESIPR);
+	writel(readl(ioaddr + EESR), ioaddr + EESR);
+	writel(mdp->cd->eesipr_value, ioaddr + EESIPR);
 
 	/* PAUSE Prohibition */
-	val = (ctrl_inl(ioaddr + ECMR) & ECMR_DM) |
+	val = (readl(ioaddr + ECMR) & ECMR_DM) |
 		ECMR_ZPF | (mdp->duplex ? ECMR_DM : 0) | ECMR_TE | ECMR_RE;
 
-	ctrl_outl(val, ioaddr + ECMR);
+	writel(val, ioaddr + ECMR);
 
 	if (mdp->cd->set_rate)
 		mdp->cd->set_rate(ndev);
 
 	/* E-MAC Status Register clear */
-	ctrl_outl(mdp->cd->ecsr_value, ioaddr + ECSR);
+	writel(mdp->cd->ecsr_value, ioaddr + ECSR);
 
 	/* E-MAC Interrupt Enable register */
-	ctrl_outl(mdp->cd->ecsipr_value, ioaddr + ECSIPR);
+	writel(mdp->cd->ecsipr_value, ioaddr + ECSIPR);
 
 	/* Set MAC address */
 	update_mac_address(ndev);
 
 	/* mask reset */
 	if (mdp->cd->apr)
-		ctrl_outl(APR_AP, ioaddr + APR);
+		writel(APR_AP, ioaddr + APR);
 	if (mdp->cd->mpr)
-		ctrl_outl(MPR_MP, ioaddr + MPR);
+		writel(MPR_MP, ioaddr + MPR);
 	if (mdp->cd->tpauser)
-		ctrl_outl(TPAUSER_UNLIMITED, ioaddr + TPAUSER);
+		writel(TPAUSER_UNLIMITED, ioaddr + TPAUSER);
 
 	/* Setting the Rx mode will start the Rx process. */
-	ctrl_outl(EDRRR_R, ioaddr + EDRRR);
+	writel(EDRRR_R, ioaddr + EDRRR);
 
 	netif_start_queue(ndev);
 
@@ -811,8 +811,8 @@ static int sh_eth_rx(struct net_device *ndev)
 
 	/* Restart Rx engine if stopped. */
 	/* If we don't need to check status, don't. -KDU */
-	if (!(ctrl_inl(ndev->base_addr + EDRRR) & EDRRR_R))
-		ctrl_outl(EDRRR_R, ndev->base_addr + EDRRR);
+	if (!(readl(ndev->base_addr + EDRRR) & EDRRR_R))
+		writel(EDRRR_R, ndev->base_addr + EDRRR);
 
 	return 0;
 }
@@ -827,8 +827,8 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 	u32 mask;
 
 	if (intr_status & EESR_ECI) {
-		felic_stat = ctrl_inl(ioaddr + ECSR);
-		ctrl_outl(felic_stat, ioaddr + ECSR);	/* clear int */
+		felic_stat = readl(ioaddr + ECSR);
+		writel(felic_stat, ioaddr + ECSR);	/* clear int */
 		if (felic_stat & ECSR_ICD)
 			mdp->stats.tx_carrier_errors++;
 		if (felic_stat & ECSR_LCHNG) {
@@ -839,25 +839,25 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 				else
 					link_stat = PHY_ST_LINK;
 			} else {
-				link_stat = (ctrl_inl(ioaddr + PSR));
+				link_stat = (readl(ioaddr + PSR));
 				if (mdp->ether_link_active_low)
 					link_stat = ~link_stat;
 			}
 			if (!(link_stat & PHY_ST_LINK)) {
 				/* Link Down : disable tx and rx */
-				ctrl_outl(ctrl_inl(ioaddr + ECMR) &
+				writel(readl(ioaddr + ECMR) &
 					  ~(ECMR_RE | ECMR_TE), ioaddr + ECMR);
 			} else {
 				/* Link Up */
-				ctrl_outl(ctrl_inl(ioaddr + EESIPR) &
+				writel(readl(ioaddr + EESIPR) &
 					  ~DMAC_M_ECI, ioaddr + EESIPR);
 				/*clear int */
-				ctrl_outl(ctrl_inl(ioaddr + ECSR),
+				writel(readl(ioaddr + ECSR),
 					  ioaddr + ECSR);
-				ctrl_outl(ctrl_inl(ioaddr + EESIPR) |
+				writel(readl(ioaddr + EESIPR) |
 					  DMAC_M_ECI, ioaddr + EESIPR);
 				/* enable tx and rx */
-				ctrl_outl(ctrl_inl(ioaddr + ECMR) |
+				writel(readl(ioaddr + ECMR) |
 					  (ECMR_RE | ECMR_TE), ioaddr + ECMR);
 			}
 		}
@@ -888,8 +888,8 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 		/* Receive Descriptor Empty int */
 		mdp->stats.rx_over_errors++;
 
-		if (ctrl_inl(ioaddr + EDRRR) ^ EDRRR_R)
-			ctrl_outl(EDRRR_R, ioaddr + EDRRR);
+		if (readl(ioaddr + EDRRR) ^ EDRRR_R)
+			writel(EDRRR_R, ioaddr + EDRRR);
 		dev_err(&ndev->dev, "Receive Descriptor Empty\n");
 	}
 	if (intr_status & EESR_RFE) {
@@ -903,7 +903,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 		mask &= ~EESR_ADE;
 	if (intr_status & mask) {
 		/* Tx error */
-		u32 edtrr = ctrl_inl(ndev->base_addr + EDTRR);
+		u32 edtrr = readl(ndev->base_addr + EDTRR);
 		/* dmesg */
 		dev_err(&ndev->dev, "TX error. status=%8.8x cur_tx=%8.8x ",
 				intr_status, mdp->cur_tx);
@@ -915,7 +915,7 @@ static void sh_eth_error(struct net_device *ndev, int intr_status)
 		/* SH7712 BUG */
 		if (edtrr ^ EDTRR_TRNS) {
 			/* tx dma start */
-			ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR);
+			writel(EDTRR_TRNS, ndev->base_addr + EDTRR);
 		}
 		/* wakeup */
 		netif_wake_queue(ndev);
@@ -934,12 +934,12 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 	spin_lock(&mdp->lock);
 
 	/* Get interrpt stat */
-	intr_status = ctrl_inl(ioaddr + EESR);
+	intr_status = readl(ioaddr + EESR);
 	/* Clear interrupt */
 	if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
 			EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
 			cd->tx_check | cd->eesr_err_check)) {
-		ctrl_outl(intr_status, ioaddr + EESR);
+		writel(intr_status, ioaddr + EESR);
 		ret = IRQ_HANDLED;
 	} else
 		goto other_irq;
@@ -1000,7 +1000,7 @@ static void sh_eth_adjust_link(struct net_device *ndev)
 				mdp->cd->set_rate(ndev);
 		}
 		if (mdp->link == PHY_DOWN) {
-			ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_TXF)
+			writel((readl(ioaddr + ECMR) & ~ECMR_TXF)
 					| ECMR_DM, ioaddr + ECMR);
 			new_state = 1;
 			mdp->link = phydev->link;
@@ -1125,7 +1125,7 @@ static void sh_eth_tx_timeout(struct net_device *ndev)
 
 	/* worning message out. */
 	printk(KERN_WARNING "%s: transmit timed out, status %8.8x,"
-	       " resetting...\n", ndev->name, (int)ctrl_inl(ioaddr + EESR));
+	       " resetting...\n", ndev->name, (int)readl(ioaddr + EESR));
 
 	/* tx_errors count up */
 	mdp->stats.tx_errors++;
@@ -1196,8 +1196,8 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
 
 	mdp->cur_tx++;
 
-	if (!(ctrl_inl(ndev->base_addr + EDTRR) & EDTRR_TRNS))
-		ctrl_outl(EDTRR_TRNS, ndev->base_addr + EDTRR);
+	if (!(readl(ndev->base_addr + EDTRR) & EDTRR_TRNS))
+		writel(EDTRR_TRNS, ndev->base_addr + EDTRR);
 
 	return NETDEV_TX_OK;
 }
@@ -1212,11 +1212,11 @@ static int sh_eth_close(struct net_device *ndev)
 	netif_stop_queue(ndev);
 
 	/* Disable interrupts by clearing the interrupt mask. */
-	ctrl_outl(0x0000, ioaddr + EESIPR);
+	writel(0x0000, ioaddr + EESIPR);
 
 	/* Stop the chip's Tx and Rx processes. */
-	ctrl_outl(0, ioaddr + EDTRR);
-	ctrl_outl(0, ioaddr + EDRRR);
+	writel(0, ioaddr + EDTRR);
+	writel(0, ioaddr + EDRRR);
 
 	/* PHY Disconnect */
 	if (mdp->phydev) {
@@ -1251,20 +1251,20 @@ static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
 
 	pm_runtime_get_sync(&mdp->pdev->dev);
 
-	mdp->stats.tx_dropped += ctrl_inl(ioaddr + TROCR);
-	ctrl_outl(0, ioaddr + TROCR);	/* (write clear) */
-	mdp->stats.collisions += ctrl_inl(ioaddr + CDCR);
-	ctrl_outl(0, ioaddr + CDCR);	/* (write clear) */
-	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + LCCR);
-	ctrl_outl(0, ioaddr + LCCR);	/* (write clear) */
+	mdp->stats.tx_dropped += readl(ioaddr + TROCR);
+	writel(0, ioaddr + TROCR);	/* (write clear) */
+	mdp->stats.collisions += readl(ioaddr + CDCR);
+	writel(0, ioaddr + CDCR);	/* (write clear) */
+	mdp->stats.tx_carrier_errors += readl(ioaddr + LCCR);
+	writel(0, ioaddr + LCCR);	/* (write clear) */
 #if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CERCR);/* CERCR */
-	ctrl_outl(0, ioaddr + CERCR);	/* (write clear) */
-	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CEECR);/* CEECR */
-	ctrl_outl(0, ioaddr + CEECR);	/* (write clear) */
+	mdp->stats.tx_carrier_errors += readl(ioaddr + CERCR);/* CERCR */
+	writel(0, ioaddr + CERCR);	/* (write clear) */
+	mdp->stats.tx_carrier_errors += readl(ioaddr + CEECR);/* CEECR */
+	writel(0, ioaddr + CEECR);	/* (write clear) */
 #else
-	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CNDCR);
-	ctrl_outl(0, ioaddr + CNDCR);	/* (write clear) */
+	mdp->stats.tx_carrier_errors += readl(ioaddr + CNDCR);
+	writel(0, ioaddr + CNDCR);	/* (write clear) */
 #endif
 	pm_runtime_put_sync(&mdp->pdev->dev);
 
@@ -1295,11 +1295,11 @@ static void sh_eth_set_multicast_list(struct net_device *ndev)
 
 	if (ndev->flags & IFF_PROMISC) {
 		/* Set promiscuous. */
-		ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_MCT) | ECMR_PRM,
+		writel((readl(ioaddr + ECMR) & ~ECMR_MCT) | ECMR_PRM,
 			  ioaddr + ECMR);
 	} else {
 		/* Normal, unicast/broadcast-only mode. */
-		ctrl_outl((ctrl_inl(ioaddr + ECMR) & ~ECMR_PRM) | ECMR_MCT,
+		writel((readl(ioaddr + ECMR) & ~ECMR_PRM) | ECMR_MCT,
 			  ioaddr + ECMR);
 	}
 }
@@ -1307,30 +1307,30 @@ static void sh_eth_set_multicast_list(struct net_device *ndev)
 /* SuperH's TSU register init function */
 static void sh_eth_tsu_init(u32 ioaddr)
 {
-	ctrl_outl(0, ioaddr + TSU_FWEN0);	/* Disable forward(0->1) */
-	ctrl_outl(0, ioaddr + TSU_FWEN1);	/* Disable forward(1->0) */
-	ctrl_outl(0, ioaddr + TSU_FCM);	/* forward fifo 3k-3k */
-	ctrl_outl(0xc, ioaddr + TSU_BSYSL0);
-	ctrl_outl(0xc, ioaddr + TSU_BSYSL1);
-	ctrl_outl(0, ioaddr + TSU_PRISL0);
-	ctrl_outl(0, ioaddr + TSU_PRISL1);
-	ctrl_outl(0, ioaddr + TSU_FWSL0);
-	ctrl_outl(0, ioaddr + TSU_FWSL1);
-	ctrl_outl(TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, ioaddr + TSU_FWSLC);
+	writel(0, ioaddr + TSU_FWEN0);	/* Disable forward(0->1) */
+	writel(0, ioaddr + TSU_FWEN1);	/* Disable forward(1->0) */
+	writel(0, ioaddr + TSU_FCM);	/* forward fifo 3k-3k */
+	writel(0xc, ioaddr + TSU_BSYSL0);
+	writel(0xc, ioaddr + TSU_BSYSL1);
+	writel(0, ioaddr + TSU_PRISL0);
+	writel(0, ioaddr + TSU_PRISL1);
+	writel(0, ioaddr + TSU_FWSL0);
+	writel(0, ioaddr + TSU_FWSL1);
+	writel(TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL, ioaddr + TSU_FWSLC);
 #if defined(CONFIG_CPU_SUBTYPE_SH7763)
-	ctrl_outl(0, ioaddr + TSU_QTAG0);	/* Disable QTAG(0->1) */
-	ctrl_outl(0, ioaddr + TSU_QTAG1);	/* Disable QTAG(1->0) */
+	writel(0, ioaddr + TSU_QTAG0);	/* Disable QTAG(0->1) */
+	writel(0, ioaddr + TSU_QTAG1);	/* Disable QTAG(1->0) */
 #else
-	ctrl_outl(0, ioaddr + TSU_QTAGM0);	/* Disable QTAG(0->1) */
-	ctrl_outl(0, ioaddr + TSU_QTAGM1);	/* Disable QTAG(1->0) */
+	writel(0, ioaddr + TSU_QTAGM0);	/* Disable QTAG(0->1) */
+	writel(0, ioaddr + TSU_QTAGM1);	/* Disable QTAG(1->0) */
 #endif
-	ctrl_outl(0, ioaddr + TSU_FWSR);	/* all interrupt status clear */
-	ctrl_outl(0, ioaddr + TSU_FWINMK);	/* Disable all interrupt */
-	ctrl_outl(0, ioaddr + TSU_TEN);	/* Disable all CAM entry */
-	ctrl_outl(0, ioaddr + TSU_POST1);	/* Disable CAM entry [ 0- 7] */
-	ctrl_outl(0, ioaddr + TSU_POST2);	/* Disable CAM entry [ 8-15] */
-	ctrl_outl(0, ioaddr + TSU_POST3);	/* Disable CAM entry [16-23] */
-	ctrl_outl(0, ioaddr + TSU_POST4);	/* Disable CAM entry [24-31] */
+	writel(0, ioaddr + TSU_FWSR);	/* all interrupt status clear */
+	writel(0, ioaddr + TSU_FWINMK);	/* Disable all interrupt */
+	writel(0, ioaddr + TSU_TEN);	/* Disable all CAM entry */
+	writel(0, ioaddr + TSU_POST1);	/* Disable CAM entry [ 0- 7] */
+	writel(0, ioaddr + TSU_POST2);	/* Disable CAM entry [ 8-15] */
+	writel(0, ioaddr + TSU_POST3);	/* Disable CAM entry [16-23] */
+	writel(0, ioaddr + TSU_POST4);	/* Disable CAM entry [24-31] */
 }
 #endif /* SH_ETH_HAS_TSU */
 
@@ -1552,7 +1552,6 @@ static int sh_eth_drv_remove(struct platform_device *pdev)
 
 	sh_mdio_release(ndev);
 	unregister_netdev(ndev);
-	flush_scheduled_work();
 	pm_runtime_disable(&pdev->dev);
 	free_netdev(ndev);
 	platform_set_drvdata(pdev, NULL);
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index 8b47763958f..efa64221eed 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
-#include <linux/workqueue.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index a5d6a6bd0c1..3406ed87091 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -1915,9 +1915,10 @@ err_release_board:
 static void __devexit sis190_remove_one(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev);
+	struct sis190_private *tp = netdev_priv(dev);
 
 	sis190_mii_remove(dev);
-	flush_scheduled_work();
+	cancel_work_sync(&tp->phy_task);
 	unregister_netdev(dev);
 	sis190_release_board(pdev);
 	pci_set_drvdata(pdev, NULL);
diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c
index 0a66fed52e8..16c62659cdd 100644
--- a/drivers/net/skfp/skfddi.c
+++ b/drivers/net/skfp/skfddi.c
@@ -412,7 +412,7 @@ static  int skfp_driver_init(struct net_device *dev)
 		bp->SharedMemAddr = pci_alloc_consistent(&bp->pdev,
 							 bp->SharedMemSize,
 							 &bp->SharedMemDMA);
-		if (!bp->SharedMemSize) {
+		if (!bp->SharedMemAddr) {
 			printk("could not allocate mem for ");
 			printk("hardware module: %ld byte\n",
 			       bp->SharedMemSize);
diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c
index 2d9941c045b..1e1bd0c201c 100644
--- a/drivers/net/skfp/smt.c
+++ b/drivers/net/skfp/smt.c
@@ -1263,7 +1263,7 @@ void smt_set_timestamp(struct s_smc *smc, u_char *p)
 static void smt_fill_policy(struct s_smc *smc, struct smt_p_policy *policy)
 {
 	int	i ;
-	u_char	*map ;
+	const u_char *map ;
 	u_short	in ;
 	u_short	out ;
 
@@ -1271,7 +1271,7 @@ static void smt_fill_policy(struct s_smc *smc, struct smt_p_policy *policy)
 	 * MIB para 101b (fddiSMTConnectionPolicy) coding
 	 * is different from 0005 coding
 	 */
-	static u_char	ansi_weirdness[16] = {
+	static const u_char ansi_weirdness[16] = {
 		0,7,5,3,8,1,6,4,9,10,2,11,12,13,14,15
 	} ;
 	SMTSETPARA(policy,SMT_P_POLICY) ;
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 220e0398f1d..42daf98ba73 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -1191,7 +1191,7 @@ static void genesis_init(struct skge_hw *hw)
 
 static void genesis_reset(struct skge_hw *hw, int port)
 {
-	const u8 zero[8]  = { 0 };
+	static const u8 zero[8]  = { 0 };
 	u32 reg;
 
 	skge_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
@@ -1557,7 +1557,7 @@ static void genesis_mac_init(struct skge_hw *hw, int port)
 	int jumbo = hw->dev[port]->mtu > ETH_DATA_LEN;
 	int i;
 	u32 r;
-	const u8 zero[6]  = { 0 };
+	static const u8 zero[6]  = { 0 };
 
 	for (i = 0; i < 10; i++) {
 		skge_write16(hw, SK_REG(port, TX_MFF_CTRL1),
@@ -2764,7 +2764,7 @@ static netdev_tx_t skge_xmit_frame(struct sk_buff *skb,
 	td->dma_hi = map >> 32;
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		const int offset = skb_transport_offset(skb);
+		const int offset = skb_checksum_start_offset(skb);
 
 		/* This seems backwards, but it is what the sk98lin
 		 * does.  Looks like hardware is wrong?
@@ -4012,8 +4012,6 @@ static void __devexit skge_remove(struct pci_dev *pdev)
 	if (!hw)
 		return;
 
-	flush_scheduled_work();
-
 	dev1 = hw->dev[1];
 	if (dev1)
 		unregister_netdev(dev1);
@@ -4044,53 +4042,40 @@ static void __devexit skge_remove(struct pci_dev *pdev)
 }
 
 #ifdef CONFIG_PM
-static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
+static int skge_suspend(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct skge_hw *hw  = pci_get_drvdata(pdev);
-	int i, err, wol = 0;
+	int i;
 
 	if (!hw)
 		return 0;
 
-	err = pci_save_state(pdev);
-	if (err)
-		return err;
-
 	for (i = 0; i < hw->ports; i++) {
 		struct net_device *dev = hw->dev[i];
 		struct skge_port *skge = netdev_priv(dev);
 
 		if (netif_running(dev))
 			skge_down(dev);
+
 		if (skge->wol)
 			skge_wol_init(skge);
-
-		wol |= skge->wol;
 	}
 
 	skge_write32(hw, B0_IMSK, 0);
 
-	pci_prepare_to_sleep(pdev);
-
 	return 0;
 }
 
-static int skge_resume(struct pci_dev *pdev)
+static int skge_resume(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct skge_hw *hw  = pci_get_drvdata(pdev);
 	int i, err;
 
 	if (!hw)
 		return 0;
 
-	err = pci_back_from_sleep(pdev);
-	if (err)
-		goto out;
-
-	err = pci_restore_state(pdev);
-	if (err)
-		goto out;
-
 	err = skge_reset(hw);
 	if (err)
 		goto out;
@@ -4111,12 +4096,19 @@ static int skge_resume(struct pci_dev *pdev)
 out:
 	return err;
 }
+
+static SIMPLE_DEV_PM_OPS(skge_pm_ops, skge_suspend, skge_resume);
+#define SKGE_PM_OPS (&skge_pm_ops)
+
+#else
+
+#define SKGE_PM_OPS NULL
 #endif
 
 static void skge_shutdown(struct pci_dev *pdev)
 {
 	struct skge_hw *hw  = pci_get_drvdata(pdev);
-	int i, wol = 0;
+	int i;
 
 	if (!hw)
 		return;
@@ -4127,15 +4119,10 @@ static void skge_shutdown(struct pci_dev *pdev)
 
 		if (skge->wol)
 			skge_wol_init(skge);
-		wol |= skge->wol;
 	}
 
-	if (pci_enable_wake(pdev, PCI_D3cold, wol))
-		pci_enable_wake(pdev, PCI_D3hot, wol);
-
-	pci_disable_device(pdev);
+	pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev));
 	pci_set_power_state(pdev, PCI_D3hot);
-
 }
 
 static struct pci_driver skge_driver = {
@@ -4143,11 +4130,8 @@ static struct pci_driver skge_driver = {
 	.id_table =     skge_id_table,
 	.probe =        skge_probe,
 	.remove =       __devexit_p(skge_remove),
-#ifdef CONFIG_PM
-	.suspend = 	skge_suspend,
-	.resume = 	skge_resume,
-#endif
 	.shutdown =	skge_shutdown,
+	.driver.pm =	SKGE_PM_OPS,
 };
 
 static struct dmi_system_id skge_32bit_dma_boards[] = {
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index d6577084ce7..39996bf3b24 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1917,8 +1917,10 @@ static void sky2_tx_complete(struct sky2_port *sky2, u16 done)
 			netif_printk(sky2, tx_done, KERN_DEBUG, dev,
 				     "tx done %u\n", idx);
 
-			dev->stats.tx_packets++;
-			dev->stats.tx_bytes += skb->len;
+			u64_stats_update_begin(&sky2->tx_stats.syncp);
+			++sky2->tx_stats.packets;
+			sky2->tx_stats.bytes += skb->len;
+			u64_stats_update_end(&sky2->tx_stats.syncp);
 
 			re->skb = NULL;
 			dev_kfree_skb_any(skb);
@@ -2460,7 +2462,7 @@ static struct sk_buff *sky2_receive(struct net_device *dev,
 
 	/* if length reported by DMA does not match PHY, packet was truncated */
 	if (length != count)
-		goto len_error;
+		goto error;
 
 okay:
 	if (length < copybreak)
@@ -2475,34 +2477,13 @@ resubmit:
 
 	return skb;
 
-len_error:
-	/* Truncation of overlength packets
-	   causes PHY length to not match MAC length */
-	++dev->stats.rx_length_errors;
-	if (net_ratelimit())
-		netif_info(sky2, rx_err, dev,
-			   "rx length error: status %#x length %d\n",
-			   status, length);
-	goto resubmit;
-
 error:
 	++dev->stats.rx_errors;
-	if (status & GMR_FS_RX_FF_OV) {
-		dev->stats.rx_over_errors++;
-		goto resubmit;
-	}
 
 	if (net_ratelimit())
 		netif_info(sky2, rx_err, dev,
 			   "rx error, status 0x%x length %d\n", status, length);
 
-	if (status & (GMR_FS_LONG_ERR | GMR_FS_UN_SIZE))
-		dev->stats.rx_length_errors++;
-	if (status & GMR_FS_FRAGMENT)
-		dev->stats.rx_frame_errors++;
-	if (status & GMR_FS_CRC_ERR)
-		dev->stats.rx_crc_errors++;
-
 	goto resubmit;
 }
 
@@ -2543,14 +2524,19 @@ static inline void sky2_skb_rx(const struct sky2_port *sky2,
 static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
 				unsigned packets, unsigned bytes)
 {
-	if (packets) {
-		struct net_device *dev = hw->dev[port];
+	struct net_device *dev = hw->dev[port];
+	struct sky2_port *sky2 = netdev_priv(dev);
 
-		dev->stats.rx_packets += packets;
-		dev->stats.rx_bytes += bytes;
-		dev->last_rx = jiffies;
-		sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
-	}
+	if (packets == 0)
+		return;
+
+	u64_stats_update_begin(&sky2->rx_stats.syncp);
+	sky2->rx_stats.packets += packets;
+	sky2->rx_stats.bytes += bytes;
+	u64_stats_update_end(&sky2->rx_stats.syncp);
+
+	dev->last_rx = jiffies;
+	sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
 }
 
 static void sky2_rx_checksum(struct sky2_port *sky2, u32 status)
@@ -3398,12 +3384,24 @@ static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 	struct sky2_hw *hw = sky2->hw;
+	bool enable_wakeup = false;
+	int i;
 
 	if ((wol->wolopts & ~sky2_wol_supported(sky2->hw)) ||
 	    !device_can_wakeup(&hw->pdev->dev))
 		return -EOPNOTSUPP;
 
 	sky2->wol = wol->wolopts;
+
+	for (i = 0; i < hw->ports; i++) {
+		struct net_device *dev = hw->dev[i];
+		struct sky2_port *sky2 = netdev_priv(dev);
+
+		if (sky2->wol)
+			enable_wakeup = true;
+	}
+	device_set_wakeup_enable(&hw->pdev->dev, enable_wakeup);
+
 	return 0;
 }
 
@@ -3614,13 +3612,11 @@ static void sky2_phy_stats(struct sky2_port *sky2, u64 * data, unsigned count)
 	unsigned port = sky2->port;
 	int i;
 
-	data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32
-	    | (u64) gma_read32(hw, port, GM_TXO_OK_LO);
-	data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32
-	    | (u64) gma_read32(hw, port, GM_RXO_OK_LO);
+	data[0] = get_stats64(hw, port, GM_TXO_OK_LO);
+	data[1] = get_stats64(hw, port, GM_RXO_OK_LO);
 
 	for (i = 2; i < count; i++)
-		data[i] = (u64) gma_read32(hw, port, sky2_stats[i].offset);
+		data[i] = get_stats32(hw, port, sky2_stats[i].offset);
 }
 
 static void sky2_set_msglevel(struct net_device *netdev, u32 value)
@@ -3738,6 +3734,51 @@ static void sky2_set_multicast(struct net_device *dev)
 	gma_write16(hw, port, GM_RX_CTRL, reg);
 }
 
+static struct rtnl_link_stats64 *sky2_get_stats(struct net_device *dev,
+						struct rtnl_link_stats64 *stats)
+{
+	struct sky2_port *sky2 = netdev_priv(dev);
+	struct sky2_hw *hw = sky2->hw;
+	unsigned port = sky2->port;
+	unsigned int start;
+	u64 _bytes, _packets;
+
+	do {
+		start = u64_stats_fetch_begin_bh(&sky2->rx_stats.syncp);
+		_bytes = sky2->rx_stats.bytes;
+		_packets = sky2->rx_stats.packets;
+	} while (u64_stats_fetch_retry_bh(&sky2->rx_stats.syncp, start));
+
+	stats->rx_packets = _packets;
+	stats->rx_bytes = _bytes;
+
+	do {
+		start = u64_stats_fetch_begin_bh(&sky2->tx_stats.syncp);
+		_bytes = sky2->tx_stats.bytes;
+		_packets = sky2->tx_stats.packets;
+	} while (u64_stats_fetch_retry_bh(&sky2->tx_stats.syncp, start));
+
+	stats->tx_packets = _packets;
+	stats->tx_bytes = _bytes;
+
+	stats->multicast = get_stats32(hw, port, GM_RXF_MC_OK)
+		+ get_stats32(hw, port, GM_RXF_BC_OK);
+
+	stats->collisions = get_stats32(hw, port, GM_TXF_COL);
+
+	stats->rx_length_errors = get_stats32(hw, port, GM_RXF_LNG_ERR);
+	stats->rx_crc_errors = get_stats32(hw, port, GM_RXF_FCS_ERR);
+	stats->rx_frame_errors = get_stats32(hw, port, GM_RXF_SHT)
+		+ get_stats32(hw, port, GM_RXE_FRAG);
+	stats->rx_over_errors = get_stats32(hw, port, GM_RXE_FIFO_OV);
+
+	stats->rx_dropped = dev->stats.rx_dropped;
+	stats->rx_fifo_errors = dev->stats.rx_fifo_errors;
+	stats->tx_fifo_errors = dev->stats.tx_fifo_errors;
+
+	return stats;
+}
+
 /* Can have one global because blinking is controlled by
  * ethtool and that is always under RTNL mutex
  */
@@ -4512,6 +4553,7 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
 	.ndo_set_multicast_list	= sky2_set_multicast,
 	.ndo_change_mtu		= sky2_change_mtu,
 	.ndo_tx_timeout		= sky2_tx_timeout,
+	.ndo_get_stats64	= sky2_get_stats,
 #ifdef SKY2_VLAN_TAG_USED
 	.ndo_vlan_rx_register	= sky2_vlan_rx_register,
 #endif
@@ -4529,6 +4571,7 @@ static const struct net_device_ops sky2_netdev_ops[2] = {
 	.ndo_set_multicast_list	= sky2_set_multicast,
 	.ndo_change_mtu		= sky2_change_mtu,
 	.ndo_tx_timeout		= sky2_tx_timeout,
+	.ndo_get_stats64	= sky2_get_stats,
 #ifdef SKY2_VLAN_TAG_USED
 	.ndo_vlan_rx_register	= sky2_vlan_rx_register,
 #endif
@@ -4920,10 +4963,11 @@ static void __devexit sky2_remove(struct pci_dev *pdev)
 	pci_set_drvdata(pdev, NULL);
 }
 
-static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
+static int sky2_suspend(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
-	int i, wol = 0;
+	int i;
 
 	if (!hw)
 		return 0;
@@ -4940,41 +4984,24 @@ static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
 
 		if (sky2->wol)
 			sky2_wol_init(sky2);
-
-		wol |= sky2->wol;
 	}
 
-	device_set_wakeup_enable(&pdev->dev, wol != 0);
-
 	sky2_power_aux(hw);
 	rtnl_unlock();
 
-	pci_save_state(pdev);
-	pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
-	pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
 	return 0;
 }
 
 #ifdef CONFIG_PM
-static int sky2_resume(struct pci_dev *pdev)
+static int sky2_resume(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct sky2_hw *hw = pci_get_drvdata(pdev);
 	int err;
 
 	if (!hw)
 		return 0;
 
-	err = pci_set_power_state(pdev, PCI_D0);
-	if (err)
-		goto out;
-
-	err = pci_restore_state(pdev);
-	if (err)
-		goto out;
-
-	pci_enable_wake(pdev, PCI_D0, 0);
-
 	/* Re-enable all clocks */
 	err = pci_write_config_dword(pdev, PCI_DEV_REG3, 0);
 	if (err) {
@@ -4994,11 +5021,20 @@ out:
 	pci_disable_device(pdev);
 	return err;
 }
+
+static SIMPLE_DEV_PM_OPS(sky2_pm_ops, sky2_suspend, sky2_resume);
+#define SKY2_PM_OPS (&sky2_pm_ops)
+
+#else
+
+#define SKY2_PM_OPS NULL
 #endif
 
 static void sky2_shutdown(struct pci_dev *pdev)
 {
-	sky2_suspend(pdev, PMSG_SUSPEND);
+	sky2_suspend(&pdev->dev);
+	pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev));
+	pci_set_power_state(pdev, PCI_D3hot);
 }
 
 static struct pci_driver sky2_driver = {
@@ -5006,11 +5042,8 @@ static struct pci_driver sky2_driver = {
 	.id_table = sky2_id_table,
 	.probe = sky2_probe,
 	.remove = __devexit_p(sky2_remove),
-#ifdef CONFIG_PM
-	.suspend = sky2_suspend,
-	.resume = sky2_resume,
-#endif
 	.shutdown = sky2_shutdown,
+	.driver.pm = SKY2_PM_OPS,
 };
 
 static int __init sky2_init_module(void)
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 61891a6cacc..80bdc404f1e 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2200,6 +2200,12 @@ enum flow_control {
 	FC_BOTH	= 3,
 };
 
+struct sky2_stats {
+	struct u64_stats_sync syncp;
+	u64		packets;
+	u64		bytes;
+};
+
 struct sky2_port {
 	struct sky2_hw	     *hw;
 	struct net_device    *netdev;
@@ -2209,6 +2215,8 @@ struct sky2_port {
 
 	struct tx_ring_info  *tx_ring;
 	struct sky2_tx_le    *tx_le;
+	struct sky2_stats    tx_stats;
+
 	u16		     tx_ring_size;
 	u16		     tx_cons;		/* next le to check */
 	u16		     tx_prod;		/* next le to use */
@@ -2221,6 +2229,7 @@ struct sky2_port {
 
 	struct rx_ring_info  *rx_ring ____cacheline_aligned_in_smp;
 	struct sky2_rx_le    *rx_le;
+	struct sky2_stats    rx_stats;
 
 	u16		     rx_next;		/* next re to check */
 	u16		     rx_put;		/* next le index to use */
@@ -2346,6 +2355,39 @@ static inline u32 gma_read32(struct sky2_hw *hw, unsigned port, unsigned reg)
 		| (u32) sky2_read16(hw, base+4) << 16;
 }
 
+static inline u64 gma_read64(struct sky2_hw *hw, unsigned port, unsigned reg)
+{
+	unsigned base = SK_GMAC_REG(port, reg);
+
+	return (u64) sky2_read16(hw, base)
+		| (u64) sky2_read16(hw, base+4) << 16
+		| (u64) sky2_read16(hw, base+8) << 32
+		| (u64) sky2_read16(hw, base+12) << 48;
+}
+
+/* There is no way to atomically read32 bit values from PHY, so retry */
+static inline u32 get_stats32(struct sky2_hw *hw, unsigned port, unsigned reg)
+{
+	u32 val;
+
+	do {
+		val = gma_read32(hw, port, reg);
+	} while (gma_read32(hw, port, reg) != val);
+
+	return val;
+}
+
+static inline u64 get_stats64(struct sky2_hw *hw, unsigned port, unsigned reg)
+{
+	u64 val;
+
+	do {
+		val = gma_read64(hw, port, reg);
+	} while (gma_read64(hw, port, reg) != val);
+
+	return val;
+}
+
 static inline void gma_write16(const struct sky2_hw *hw, unsigned port, int r, u16 v)
 {
 	sky2_write16(hw, SK_GMAC_REG(port,r), v);
diff --git a/drivers/net/smc-ultra.c b/drivers/net/smc-ultra.c
index d2dd8e6113a..235a3c6c9f9 100644
--- a/drivers/net/smc-ultra.c
+++ b/drivers/net/smc-ultra.c
@@ -277,8 +277,12 @@ static int __init ultra_probe1(struct net_device *dev, int ioaddr)
 	dev->base_addr = ioaddr+ULTRA_NIC_OFFSET;
 
 	{
-		int addr_tbl[4] = {0x0C0000, 0x0E0000, 0xFC0000, 0xFE0000};
-		short num_pages_tbl[4] = {0x20, 0x40, 0x80, 0xff};
+		static const int addr_tbl[4] = {
+			0x0C0000, 0x0E0000, 0xFC0000, 0xFE0000
+		};
+		static const short num_pages_tbl[4] = {
+			0x20, 0x40, 0x80, 0xff
+		};
 
 		dev->mem_start = ((addr & 0x0f) << 13) + addr_tbl[(addr >> 6) & 3] ;
 		num_pages = num_pages_tbl[(addr >> 4) & 3];
diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c
index 4adf1242278..a4f2bd52e54 100644
--- a/drivers/net/starfire.c
+++ b/drivers/net/starfire.c
@@ -148,7 +148,7 @@ static int full_duplex[MAX_UNITS] = {0, };
  * This SUCKS.
  * We need a much better method to determine if dma_addr_t is 64-bit.
  */
-#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) || (defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT))
+#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__alpha__) || (defined(CONFIG_MIPS) && ((defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) || defined(CONFIG_64BIT))) || (defined(__powerpc64__) || defined(CONFIG_PHYS_64BIT))
 /* 64-bit dma_addr_t */
 #define ADDR_64BITS	/* This chip uses 64 bit addresses. */
 #define netdrv_addr_t __le64
diff --git a/drivers/net/stmmac/stmmac.h b/drivers/net/stmmac/stmmac.h
index 79bdc2e1322..5f06c4706ab 100644
--- a/drivers/net/stmmac/stmmac.h
+++ b/drivers/net/stmmac/stmmac.h
@@ -20,7 +20,7 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
-#define DRV_MODULE_VERSION	"Apr_2010"
+#define DRV_MODULE_VERSION	"Nov_2010"
 #include <linux/platform_device.h>
 #include <linux/stmmac.h>
 
@@ -37,7 +37,6 @@ struct stmmac_priv {
 	unsigned int cur_tx;
 	unsigned int dirty_tx;
 	unsigned int dma_tx_size;
-	int tx_coe;
 	int tx_coalesce;
 
 	struct dma_desc *dma_rx ;
@@ -48,7 +47,6 @@ struct stmmac_priv {
 	struct sk_buff_head rx_recycle;
 
 	struct net_device *dev;
-	int is_gmac;
 	dma_addr_t dma_rx_phy;
 	unsigned int dma_rx_size;
 	unsigned int dma_buf_sz;
@@ -60,14 +58,11 @@ struct stmmac_priv {
 	struct napi_struct napi;
 
 	phy_interface_t phy_interface;
-	int pbl;
-	int bus_id;
 	int phy_addr;
 	int phy_mask;
 	int (*phy_reset) (void *priv);
-	void (*fix_mac_speed) (void *priv, unsigned int speed);
-	void (*bus_setup)(void __iomem *ioaddr);
-	void *bsp_priv;
+	int rx_coe;
+	int no_csum_insertion;
 
 	int phy_irq;
 	struct phy_device *phydev;
@@ -77,47 +72,20 @@ struct stmmac_priv {
 	unsigned int flow_ctrl;
 	unsigned int pause;
 	struct mii_bus *mii;
-	int mii_clk_csr;
 
 	u32 msg_enable;
 	spinlock_t lock;
 	int wolopts;
 	int wolenabled;
-	int shutdown;
 #ifdef CONFIG_STMMAC_TIMER
 	struct stmmac_timer *tm;
 #endif
 #ifdef STMMAC_VLAN_TAG_USED
 	struct vlan_group *vlgrp;
 #endif
-	int enh_desc;
-	int rx_coe;
-	int bugged_jumbo;
-	int no_csum_insertion;
+	struct plat_stmmacenet_data *plat;
 };
 
-#ifdef CONFIG_STM_DRIVERS
-#include <linux/stm/pad.h>
-static inline int stmmac_claim_resource(struct platform_device *pdev)
-{
-	int ret = 0;
-	struct plat_stmmacenet_data *plat_dat = pdev->dev.platform_data;
-
-	/* Pad routing setup */
-	if (IS_ERR(devm_stm_pad_claim(&pdev->dev, plat_dat->pad_config,
-			dev_name(&pdev->dev)))) {
-		printk(KERN_ERR "%s: Failed to request pads!\n", __func__);
-		ret = -ENODEV;
-	}
-	return ret;
-}
-#else
-static inline int stmmac_claim_resource(struct platform_device *pdev)
-{
-	return 0;
-}
-#endif
-
 extern int stmmac_mdio_unregister(struct net_device *ndev);
 extern int stmmac_mdio_register(struct net_device *ndev);
 extern void stmmac_set_ethtool_ops(struct net_device *netdev);
diff --git a/drivers/net/stmmac/stmmac_ethtool.c b/drivers/net/stmmac/stmmac_ethtool.c
index 6d65482e789..fd719edc7f7 100644
--- a/drivers/net/stmmac/stmmac_ethtool.c
+++ b/drivers/net/stmmac/stmmac_ethtool.c
@@ -94,7 +94,7 @@ static void stmmac_ethtool_getdrvinfo(struct net_device *dev,
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 
-	if (!priv->is_gmac)
+	if (!priv->plat->has_gmac)
 		strcpy(info->driver, MAC100_ETHTOOL_NAME);
 	else
 		strcpy(info->driver, GMAC_ETHTOOL_NAME);
@@ -176,7 +176,7 @@ static void stmmac_ethtool_gregs(struct net_device *dev,
 
 	memset(reg_space, 0x0, REG_SPACE_SIZE);
 
-	if (!priv->is_gmac) {
+	if (!priv->plat->has_gmac) {
 		/* MAC registers */
 		for (i = 0; i < 12; i++)
 			reg_space[i] = readl(priv->ioaddr + (i * 4));
@@ -197,16 +197,6 @@ static void stmmac_ethtool_gregs(struct net_device *dev,
 	}
 }
 
-static int stmmac_ethtool_set_tx_csum(struct net_device *netdev, u32 data)
-{
-	if (data)
-		netdev->features |= NETIF_F_HW_CSUM;
-	else
-		netdev->features &= ~NETIF_F_HW_CSUM;
-
-	return 0;
-}
-
 static u32 stmmac_ethtool_get_rx_csum(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
@@ -370,7 +360,7 @@ static struct ethtool_ops stmmac_ethtool_ops = {
 	.get_link = ethtool_op_get_link,
 	.get_rx_csum = stmmac_ethtool_get_rx_csum,
 	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = stmmac_ethtool_set_tx_csum,
+	.set_tx_csum = ethtool_op_set_tx_ipv6_csum,
 	.get_sg = ethtool_op_get_sg,
 	.set_sg = ethtool_op_set_sg,
 	.get_pauseparam = stmmac_get_pauseparam,
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 06bc6034ce8..34a0af3837f 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -186,6 +186,18 @@ static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
 	return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1;
 }
 
+/* On some ST platforms, some HW system configuraton registers have to be
+ * set according to the link speed negotiated.
+ */
+static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
+{
+	struct phy_device *phydev = priv->phydev;
+
+	if (likely(priv->plat->fix_mac_speed))
+		priv->plat->fix_mac_speed(priv->plat->bsp_priv,
+					  phydev->speed);
+}
+
 /**
  * stmmac_adjust_link
  * @dev: net device structure
@@ -228,15 +240,13 @@ static void stmmac_adjust_link(struct net_device *dev)
 			new_state = 1;
 			switch (phydev->speed) {
 			case 1000:
-				if (likely(priv->is_gmac))
+				if (likely(priv->plat->has_gmac))
 					ctrl &= ~priv->hw->link.port;
-				if (likely(priv->fix_mac_speed))
-					priv->fix_mac_speed(priv->bsp_priv,
-							    phydev->speed);
+				stmmac_hw_fix_mac_speed(priv);
 				break;
 			case 100:
 			case 10:
-				if (priv->is_gmac) {
+				if (priv->plat->has_gmac) {
 					ctrl |= priv->hw->link.port;
 					if (phydev->speed == SPEED_100) {
 						ctrl |= priv->hw->link.speed;
@@ -246,9 +256,7 @@ static void stmmac_adjust_link(struct net_device *dev)
 				} else {
 					ctrl &= ~priv->hw->link.port;
 				}
-				if (likely(priv->fix_mac_speed))
-					priv->fix_mac_speed(priv->bsp_priv,
-							    phydev->speed);
+				stmmac_hw_fix_mac_speed(priv);
 				break;
 			default:
 				if (netif_msg_link(priv))
@@ -305,7 +313,7 @@ static int stmmac_init_phy(struct net_device *dev)
 		return 0;
 	}
 
-	snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+	snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->plat->bus_id);
 	snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
 		 priv->phy_addr);
 	pr_debug("stmmac_init_phy:  trying to attach to %s\n", phy_id);
@@ -552,7 +560,7 @@ static void free_dma_desc_resources(struct stmmac_priv *priv)
  */
 static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
 {
-	if (likely((priv->tx_coe) && (!priv->no_csum_insertion))) {
+	if (likely((priv->plat->tx_coe) && (!priv->no_csum_insertion))) {
 		/* In case of GMAC, SF mode has to be enabled
 		 * to perform the TX COE. This depends on:
 		 * 1) TX COE if actually supported
@@ -814,7 +822,7 @@ static int stmmac_open(struct net_device *dev)
 	init_dma_desc_rings(dev);
 
 	/* DMA initialization and SW reset */
-	if (unlikely(priv->hw->dma->init(priv->ioaddr, priv->pbl,
+	if (unlikely(priv->hw->dma->init(priv->ioaddr, priv->plat->pbl,
 					 priv->dma_tx_phy,
 					 priv->dma_rx_phy) < 0)) {
 
@@ -825,19 +833,17 @@ static int stmmac_open(struct net_device *dev)
 	/* Copy the MAC addr into the HW  */
 	priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0);
 	/* If required, perform hw setup of the bus. */
-	if (priv->bus_setup)
-		priv->bus_setup(priv->ioaddr);
+	if (priv->plat->bus_setup)
+		priv->plat->bus_setup(priv->ioaddr);
 	/* Initialize the MAC Core */
 	priv->hw->mac->core_init(priv->ioaddr);
 
 	priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr);
 	if (priv->rx_coe)
 		pr_info("stmmac: Rx Checksum Offload Engine supported\n");
-	if (priv->tx_coe)
+	if (priv->plat->tx_coe)
 		pr_info("\tTX Checksum insertion supported\n");
 
-	priv->shutdown = 0;
-
 	/* Initialise the MMC (if present) to disable all interrupts. */
 	writel(0xffffffff, priv->ioaddr + MMC_HIGH_INTR_MASK);
 	writel(0xffffffff, priv->ioaddr + MMC_LOW_INTR_MASK);
@@ -943,7 +949,7 @@ static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb)
 	       skb, skb->len);
 
 	segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO);
-	if (unlikely(IS_ERR(segs)))
+	if (IS_ERR(segs))
 		goto sw_tso_end;
 
 	do {
@@ -1042,7 +1048,8 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 		return stmmac_sw_tso(priv, skb);
 
 	if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
-		if (unlikely((!priv->tx_coe) || (priv->no_csum_insertion)))
+		if (unlikely((!priv->plat->tx_coe) ||
+			     (priv->no_csum_insertion)))
 			skb_checksum_help(skb);
 		else
 			csum_insertion = 1;
@@ -1146,7 +1153,7 @@ static inline void stmmac_rx_refill(struct stmmac_priv *priv)
 					   DMA_FROM_DEVICE);
 
 			(p + entry)->des2 = priv->rx_skbuff_dma[entry];
-			if (unlikely(priv->is_gmac)) {
+			if (unlikely(priv->plat->has_gmac)) {
 				if (bfsize >= BUF_SIZE_8KiB)
 					(p + entry)->des3 =
 					    (p + entry)->des2 + BUF_SIZE_8KiB;
@@ -1356,7 +1363,7 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
 		return -EBUSY;
 	}
 
-	if (priv->is_gmac)
+	if (priv->plat->has_gmac)
 		max_mtu = JUMBO_LEN;
 	else
 		max_mtu = ETH_DATA_LEN;
@@ -1370,7 +1377,7 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
 	 * needs to have the Tx COE disabled for oversized frames
 	 * (due to limited buffer sizes). In this case we disable
 	 * the TX csum insertionin the TDES and not use SF. */
-	if ((priv->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN))
+	if ((priv->plat->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN))
 		priv->no_csum_insertion = 1;
 	else
 		priv->no_csum_insertion = 0;
@@ -1390,7 +1397,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 		return IRQ_NONE;
 	}
 
-	if (priv->is_gmac)
+	if (priv->plat->has_gmac)
 		/* To handle GMAC own interrupts */
 		priv->hw->mac->host_irq_status((void __iomem *) dev->base_addr);
 
@@ -1487,7 +1494,8 @@ static int stmmac_probe(struct net_device *dev)
 	dev->netdev_ops = &stmmac_netdev_ops;
 	stmmac_set_ethtool_ops(dev);
 
-	dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA);
+	dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA |
+		NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	dev->watchdog_timeo = msecs_to_jiffies(watchdog);
 #ifdef STMMAC_VLAN_TAG_USED
 	/* Both mac100 and gmac support receive VLAN tag detection */
@@ -1509,6 +1517,8 @@ static int stmmac_probe(struct net_device *dev)
 		pr_warning("\tno valid MAC address;"
 			"please, use ifconfig or nwhwconfig!\n");
 
+	spin_lock_init(&priv->lock);
+
 	ret = register_netdev(dev);
 	if (ret) {
 		pr_err("%s: ERROR %i registering the device\n",
@@ -1518,9 +1528,7 @@ static int stmmac_probe(struct net_device *dev)
 
 	DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
 	    dev->name, (dev->features & NETIF_F_SG) ? "on" : "off",
-	    (dev->features & NETIF_F_HW_CSUM) ? "on" : "off");
-
-	spin_lock_init(&priv->lock);
+	    (dev->features & NETIF_F_IP_CSUM) ? "on" : "off");
 
 	return ret;
 }
@@ -1536,7 +1544,7 @@ static int stmmac_mac_device_setup(struct net_device *dev)
 
 	struct mac_device_info *device;
 
-	if (priv->is_gmac)
+	if (priv->plat->has_gmac)
 		device = dwmac1000_setup(priv->ioaddr);
 	else
 		device = dwmac100_setup(priv->ioaddr);
@@ -1544,7 +1552,7 @@ static int stmmac_mac_device_setup(struct net_device *dev)
 	if (!device)
 		return -ENOMEM;
 
-	if (priv->enh_desc) {
+	if (priv->plat->enh_desc) {
 		device->desc = &enh_desc_ops;
 		pr_info("\tEnhanced descriptor structure\n");
 	} else
@@ -1598,7 +1606,7 @@ static int stmmac_associate_phy(struct device *dev, void *data)
 		plat_dat->bus_id);
 
 	/* Check that this phy is for the MAC being initialised */
-	if (priv->bus_id != plat_dat->bus_id)
+	if (priv->plat->bus_id != plat_dat->bus_id)
 		return 0;
 
 	/* OK, this PHY is connected to the MAC.
@@ -1634,15 +1642,13 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
 	struct resource *res;
 	void __iomem *addr = NULL;
 	struct net_device *ndev = NULL;
-	struct stmmac_priv *priv;
+	struct stmmac_priv *priv = NULL;
 	struct plat_stmmacenet_data *plat_dat;
 
 	pr_info("STMMAC driver:\n\tplatform registration... ");
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		ret = -ENODEV;
-		goto out;
-	}
+	if (!res)
+		return -ENODEV;
 	pr_info("\tdone!\n");
 
 	if (!request_mem_region(res->start, resource_size(res),
@@ -1650,22 +1656,21 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
 		pr_err("%s: ERROR: memory allocation failed"
 		       "cannot get the I/O addr 0x%x\n",
 		       __func__, (unsigned int)res->start);
-		ret = -EBUSY;
-		goto out;
+		return -EBUSY;
 	}
 
 	addr = ioremap(res->start, resource_size(res));
 	if (!addr) {
 		pr_err("%s: ERROR: memory mapping failed\n", __func__);
 		ret = -ENOMEM;
-		goto out;
+		goto out_release_region;
 	}
 
 	ndev = alloc_etherdev(sizeof(struct stmmac_priv));
 	if (!ndev) {
 		pr_err("%s: ERROR: allocating the device\n", __func__);
 		ret = -ENOMEM;
-		goto out;
+		goto out_unmap;
 	}
 
 	SET_NETDEV_DEV(ndev, &pdev->dev);
@@ -1675,21 +1680,17 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
 	if (ndev->irq == -ENXIO) {
 		pr_err("%s: ERROR: MAC IRQ configuration "
 		       "information not found\n", __func__);
-		ret = -ENODEV;
-		goto out;
+		ret = -ENXIO;
+		goto out_free_ndev;
 	}
 
 	priv = netdev_priv(ndev);
 	priv->device = &(pdev->dev);
 	priv->dev = ndev;
 	plat_dat = pdev->dev.platform_data;
-	priv->bus_id = plat_dat->bus_id;
-	priv->pbl = plat_dat->pbl;	/* TLI */
-	priv->mii_clk_csr = plat_dat->clk_csr;
-	priv->tx_coe = plat_dat->tx_coe;
-	priv->bugged_jumbo = plat_dat->bugged_jumbo;
-	priv->is_gmac = plat_dat->has_gmac;	/* GMAC is on board */
-	priv->enh_desc = plat_dat->enh_desc;
+
+	priv->plat = plat_dat;
+
 	priv->ioaddr = addr;
 
 	/* PMT module is not integrated in all the MAC devices. */
@@ -1703,20 +1704,22 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
 	/* Set the I/O base addr */
 	ndev->base_addr = (unsigned long)addr;
 
-	/* Verify embedded resource for the platform */
-	ret = stmmac_claim_resource(pdev);
-	if (ret < 0)
-		goto out;
+	/* Custom initialisation */
+	if (priv->plat->init) {
+		ret = priv->plat->init(pdev);
+		if (unlikely(ret))
+			goto out_free_ndev;
+	}
 
 	/* MAC HW revice detection */
 	ret = stmmac_mac_device_setup(ndev);
 	if (ret < 0)
-		goto out;
+		goto out_plat_exit;
 
 	/* Network Device Registration */
 	ret = stmmac_probe(ndev);
 	if (ret < 0)
-		goto out;
+		goto out_plat_exit;
 
 	/* associate a PHY - it is provided by another platform bus */
 	if (!driver_for_each_device
@@ -1724,31 +1727,33 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
 	     stmmac_associate_phy)) {
 		pr_err("No PHY device is associated with this MAC!\n");
 		ret = -ENODEV;
-		goto out;
+		goto out_unregister;
 	}
 
-	priv->fix_mac_speed = plat_dat->fix_mac_speed;
-	priv->bus_setup = plat_dat->bus_setup;
-	priv->bsp_priv = plat_dat->bsp_priv;
-
 	pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
 	       "\tIO base addr: 0x%p)\n", ndev->name, pdev->name,
 	       pdev->id, ndev->irq, addr);
 
 	/* MDIO bus Registration */
-	pr_debug("\tMDIO bus (id: %d)...", priv->bus_id);
+	pr_debug("\tMDIO bus (id: %d)...", priv->plat->bus_id);
 	ret = stmmac_mdio_register(ndev);
 	if (ret < 0)
-		goto out;
+		goto out_unregister;
 	pr_debug("registered!\n");
+	return 0;
 
-out:
-	if (ret < 0) {
-		platform_set_drvdata(pdev, NULL);
-		release_mem_region(res->start, resource_size(res));
-		if (addr != NULL)
-			iounmap(addr);
-	}
+out_unregister:
+	unregister_netdev(ndev);
+out_plat_exit:
+	if (priv->plat->exit)
+		priv->plat->exit(pdev);
+out_free_ndev:
+	free_netdev(ndev);
+	platform_set_drvdata(pdev, NULL);
+out_unmap:
+	iounmap(addr);
+out_release_region:
+	release_mem_region(res->start, resource_size(res));
 
 	return ret;
 }
@@ -1777,6 +1782,9 @@ static int stmmac_dvr_remove(struct platform_device *pdev)
 
 	stmmac_mdio_unregister(ndev);
 
+	if (priv->plat->exit)
+		priv->plat->exit(pdev);
+
 	platform_set_drvdata(pdev, NULL);
 	unregister_netdev(ndev);
 
@@ -1790,69 +1798,54 @@ static int stmmac_dvr_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
+static int stmmac_suspend(struct device *dev)
 {
-	struct net_device *dev = platform_get_drvdata(pdev);
-	struct stmmac_priv *priv = netdev_priv(dev);
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
 	int dis_ic = 0;
 
-	if (!dev || !netif_running(dev))
+	if (!ndev || !netif_running(ndev))
 		return 0;
 
 	spin_lock(&priv->lock);
 
-	if (state.event == PM_EVENT_SUSPEND) {
-		netif_device_detach(dev);
-		netif_stop_queue(dev);
-		if (priv->phydev)
-			phy_stop(priv->phydev);
+	netif_device_detach(ndev);
+	netif_stop_queue(ndev);
+	if (priv->phydev)
+		phy_stop(priv->phydev);
 
 #ifdef CONFIG_STMMAC_TIMER
-		priv->tm->timer_stop();
-		if (likely(priv->tm->enable))
-			dis_ic = 1;
+	priv->tm->timer_stop();
+	if (likely(priv->tm->enable))
+		dis_ic = 1;
 #endif
-		napi_disable(&priv->napi);
-
-		/* Stop TX/RX DMA */
-		priv->hw->dma->stop_tx(priv->ioaddr);
-		priv->hw->dma->stop_rx(priv->ioaddr);
-		/* Clear the Rx/Tx descriptors */
-		priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
-					     dis_ic);
-		priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
-
-		/* Enable Power down mode by programming the PMT regs */
-		if (device_can_wakeup(priv->device))
-			priv->hw->mac->pmt(priv->ioaddr, priv->wolopts);
-		else
-			stmmac_disable_mac(priv->ioaddr);
-	} else {
-		priv->shutdown = 1;
-		/* Although this can appear slightly redundant it actually
-		 * makes fast the standby operation and guarantees the driver
-		 * working if hibernation is on media. */
-		stmmac_release(dev);
-	}
+	napi_disable(&priv->napi);
+
+	/* Stop TX/RX DMA */
+	priv->hw->dma->stop_tx(priv->ioaddr);
+	priv->hw->dma->stop_rx(priv->ioaddr);
+	/* Clear the Rx/Tx descriptors */
+	priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
+				     dis_ic);
+	priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
+
+	/* Enable Power down mode by programming the PMT regs */
+	if (device_may_wakeup(priv->device))
+		priv->hw->mac->pmt(priv->ioaddr, priv->wolopts);
+	else
+		stmmac_disable_mac(priv->ioaddr);
 
 	spin_unlock(&priv->lock);
 	return 0;
 }
 
-static int stmmac_resume(struct platform_device *pdev)
+static int stmmac_resume(struct device *dev)
 {
-	struct net_device *dev = platform_get_drvdata(pdev);
-	struct stmmac_priv *priv = netdev_priv(dev);
-
-	if (!netif_running(dev))
-		return 0;
+	struct net_device *ndev = dev_get_drvdata(dev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
 
-	if (priv->shutdown) {
-		/* Re-open the interface and re-init the MAC/DMA
-		   and the rings (i.e. on hibernation stage) */
-		stmmac_open(dev);
+	if (!netif_running(ndev))
 		return 0;
-	}
 
 	spin_lock(&priv->lock);
 
@@ -1861,10 +1854,10 @@ static int stmmac_resume(struct platform_device *pdev)
 	 * is received. Anyway, it's better to manually clear
 	 * this bit because it can generate problems while resuming
 	 * from another devices (e.g. serial console). */
-	if (device_can_wakeup(priv->device))
+	if (device_may_wakeup(priv->device))
 		priv->hw->mac->pmt(priv->ioaddr, 0);
 
-	netif_device_attach(dev);
+	netif_device_attach(ndev);
 
 	/* Enable the MAC and DMA */
 	stmmac_enable_mac(priv->ioaddr);
@@ -1872,31 +1865,59 @@ static int stmmac_resume(struct platform_device *pdev)
 	priv->hw->dma->start_rx(priv->ioaddr);
 
 #ifdef CONFIG_STMMAC_TIMER
-	priv->tm->timer_start(tmrate);
+	if (likely(priv->tm->enable))
+		priv->tm->timer_start(tmrate);
 #endif
 	napi_enable(&priv->napi);
 
 	if (priv->phydev)
 		phy_start(priv->phydev);
 
-	netif_start_queue(dev);
+	netif_start_queue(ndev);
 
 	spin_unlock(&priv->lock);
 	return 0;
 }
-#endif
 
-static struct platform_driver stmmac_driver = {
-	.driver = {
-		   .name = STMMAC_RESOURCE_NAME,
-		   },
-	.probe = stmmac_dvr_probe,
-	.remove = stmmac_dvr_remove,
-#ifdef CONFIG_PM
+static int stmmac_freeze(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	if (!ndev || !netif_running(ndev))
+		return 0;
+
+	return stmmac_release(ndev);
+}
+
+static int stmmac_restore(struct device *dev)
+{
+	struct net_device *ndev = dev_get_drvdata(dev);
+
+	if (!ndev || !netif_running(ndev))
+		return 0;
+
+	return stmmac_open(ndev);
+}
+
+static const struct dev_pm_ops stmmac_pm_ops = {
 	.suspend = stmmac_suspend,
 	.resume = stmmac_resume,
-#endif
+	.freeze = stmmac_freeze,
+	.thaw = stmmac_restore,
+	.restore = stmmac_restore,
+};
+#else
+static const struct dev_pm_ops stmmac_pm_ops;
+#endif /* CONFIG_PM */
 
+static struct platform_driver stmmac_driver = {
+	.probe = stmmac_dvr_probe,
+	.remove = stmmac_dvr_remove,
+	.driver = {
+		.name = STMMAC_RESOURCE_NAME,
+		.owner = THIS_MODULE,
+		.pm = &stmmac_pm_ops,
+	},
 };
 
 /**
diff --git a/drivers/net/stmmac/stmmac_mdio.c b/drivers/net/stmmac/stmmac_mdio.c
index d7441616357..234b4068a1f 100644
--- a/drivers/net/stmmac/stmmac_mdio.c
+++ b/drivers/net/stmmac/stmmac_mdio.c
@@ -53,7 +53,7 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 	int data;
 	u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
 			((phyreg << 6) & (0x000007C0)));
-	regValue |= MII_BUSY | ((priv->mii_clk_csr & 7) << 2);
+	regValue |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2);
 
 	do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1);
 	writel(regValue, priv->ioaddr + mii_address);
@@ -85,7 +85,7 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
 	    (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
 	    | MII_WRITE;
 
-	value |= MII_BUSY | ((priv->mii_clk_csr & 7) << 2);
+	value |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2);
 
 
 	/* Wait until any existing MII operation is complete */
@@ -114,7 +114,7 @@ static int stmmac_mdio_reset(struct mii_bus *bus)
 
 	if (priv->phy_reset) {
 		pr_debug("stmmac_mdio_reset: calling phy_reset\n");
-		priv->phy_reset(priv->bsp_priv);
+		priv->phy_reset(priv->plat->bsp_priv);
 	}
 
 	/* This is a workaround for problems with the STE101P PHY.
@@ -157,7 +157,7 @@ int stmmac_mdio_register(struct net_device *ndev)
 	new_bus->read = &stmmac_mdio_read;
 	new_bus->write = &stmmac_mdio_write;
 	new_bus->reset = &stmmac_mdio_reset;
-	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->plat->bus_id);
 	new_bus->priv = ndev;
 	new_bus->irq = irqlist;
 	new_bus->phy_mask = priv->phy_mask;
diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index 3ed2a67bd6d..4793df843c2 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -294,6 +294,9 @@ enum alta_offsets {
 	/* Aliased and bogus values! */
 	RxStatus = 0x0c,
 };
+
+#define ASIC_HI_WORD(x)	((x) + 2)
+
 enum ASICCtrl_HiWord_bit {
 	GlobalReset = 0x0001,
 	RxReset = 0x0002,
@@ -431,6 +434,7 @@ static void netdev_error(struct net_device *dev, int intr_status);
 static void netdev_error(struct net_device *dev, int intr_status);
 static void set_rx_mode(struct net_device *dev);
 static int __set_mac_addr(struct net_device *dev);
+static int sundance_set_mac_addr(struct net_device *dev, void *data);
 static struct net_device_stats *get_stats(struct net_device *dev);
 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 static int  netdev_close(struct net_device *dev);
@@ -464,7 +468,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_do_ioctl 		= netdev_ioctl,
 	.ndo_tx_timeout		= tx_timeout,
 	.ndo_change_mtu		= change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_set_mac_address 	= sundance_set_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
@@ -1016,7 +1020,7 @@ static void init_ring(struct net_device *dev)
 
 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
 	for (i = 0; i < RX_RING_SIZE; i++) {
-		struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz);
+		struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz + 2);
 		np->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
@@ -1407,7 +1411,7 @@ static void refill_rx (struct net_device *dev)
 		struct sk_buff *skb;
 		entry = np->dirty_rx % RX_RING_SIZE;
 		if (np->rx_skbuff[entry] == NULL) {
-			skb = dev_alloc_skb(np->rx_buf_sz);
+			skb = dev_alloc_skb(np->rx_buf_sz + 2);
 			np->rx_skbuff[entry] = skb;
 			if (skb == NULL)
 				break;		/* Better luck next round. */
@@ -1592,6 +1596,19 @@ static int __set_mac_addr(struct net_device *dev)
 	return 0;
 }
 
+/* Invoked with rtnl_lock held */
+static int sundance_set_mac_addr(struct net_device *dev, void *data)
+{
+	const struct sockaddr *addr = data;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+	__set_mac_addr(dev);
+
+	return 0;
+}
+
 static const struct {
 	const char name[ETH_GSTRING_LEN];
 } sundance_stats[] = {
@@ -1772,10 +1789,10 @@ static int netdev_close(struct net_device *dev)
     	}
 
     	iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset,
-			ioaddr +ASICCtrl + 2);
+			ioaddr + ASIC_HI_WORD(ASICCtrl));
 
     	for (i = 2000; i > 0; i--) {
- 		if ((ioread16(ioaddr + ASICCtrl +2) & ResetBusy) == 0)
+		if ((ioread16(ioaddr + ASIC_HI_WORD(ASICCtrl)) & ResetBusy) == 0)
 			break;
 		mdelay(1);
     	}
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 4ceb3cf6a9a..1c5408f8393 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1004,7 +1004,7 @@ static netdev_tx_t gem_start_xmit(struct sk_buff *skb,
 
 	ctrl = 0;
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		const u64 csum_start_off = skb_transport_offset(skb);
+		const u64 csum_start_off = skb_checksum_start_offset(skb);
 		const u64 csum_stuff_off = csum_start_off + skb->csum_offset;
 
 		ctrl = (TXDCTRL_CENAB |
@@ -2380,10 +2380,8 @@ static int gem_suspend(struct pci_dev *pdev, pm_message_t state)
 	 */
 	mutex_unlock(&gp->pm_mutex);
 
-	/* Wait for a pending reset task to complete */
-	while (gp->reset_task_pending)
-		yield();
-	flush_scheduled_work();
+	/* Wait for the pending reset task to complete */
+	flush_work_sync(&gp->reset_task);
 
 	/* Shut the PHY down eventually and setup WOL */
 	gem_stop_phy(gp, gp->asleep_wol);
@@ -2928,10 +2926,8 @@ static void gem_remove_one(struct pci_dev *pdev)
 		/* We shouldn't need any locking here */
 		gem_get_cell(gp);
 
-		/* Wait for a pending reset task to complete */
-		while (gp->reset_task_pending)
-			yield();
-		flush_scheduled_work();
+		/* Cancel reset task */
+		cancel_work_sync(&gp->reset_task);
 
 		/* Shut the PHY down */
 		gem_stop_phy(gp, 0);
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index 5e28c414421..55bbb9c15d9 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -2266,7 +2266,7 @@ static netdev_tx_t happy_meal_start_xmit(struct sk_buff *skb,
 
 	tx_flags = TXFLAG_OWN;
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		const u32 csum_start_off = skb_transport_offset(skb);
+		const u32 csum_start_off = skb_checksum_start_offset(skb);
 		const u32 csum_stuff_off = csum_start_off + skb->csum_offset;
 
 		tx_flags = (TXFLAG_OWN | TXFLAG_CSENABLE |
diff --git a/drivers/net/sunlance.c b/drivers/net/sunlance.c
index 2cf84e5968b..767e1e2b210 100644
--- a/drivers/net/sunlance.c
+++ b/drivers/net/sunlance.c
@@ -1295,17 +1295,9 @@ static void sparc_lance_get_drvinfo(struct net_device *dev, struct ethtool_drvin
 	strcpy(info->version, "2.02");
 }
 
-static u32 sparc_lance_get_link(struct net_device *dev)
-{
-	/* We really do not keep track of this, but this
-	 * is better than not reporting anything at all.
-	 */
-	return 1;
-}
-
 static const struct ethtool_ops sparc_lance_ethtool_ops = {
 	.get_drvinfo		= sparc_lance_get_drvinfo,
-	.get_link		= sparc_lance_get_link,
+	.get_link		= ethtool_op_get_link,
 };
 
 static const struct net_device_ops sparc_lance_ops = {
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 8b3dc1eb401..296000bf5a2 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -324,7 +324,7 @@ static int bdx_fw_load(struct bdx_priv *priv)
 	ENTER;
 	master = READ_REG(priv, regINIT_SEMAPHORE);
 	if (!READ_REG(priv, regINIT_STATUS) && master) {
-		rc = request_firmware(&fw, "tehuti/firmware.bin", &priv->pdev->dev);
+		rc = request_firmware(&fw, "tehuti/bdx.bin", &priv->pdev->dev);
 		if (rc)
 			goto out;
 		bdx_tx_push_desc_safe(priv, (char *)fw->data, fw->size);
@@ -2510,4 +2510,4 @@ module_exit(bdx_module_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(BDX_DRV_DESC);
-MODULE_FIRMWARE("tehuti/firmware.bin");
+MODULE_FIRMWARE("tehuti/bdx.bin");
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 30ccbb6d097..7841a8f6999 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -32,6 +32,7 @@
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/ethtool.h>
+#include <linux/mdio.h>
 #include <linux/mii.h>
 #include <linux/phy.h>
 #include <linux/brcmphy.h>
@@ -69,10 +70,10 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define TG3_MAJ_NUM			3
-#define TG3_MIN_NUM			115
+#define TG3_MIN_NUM			116
 #define DRV_MODULE_VERSION	\
 	__stringify(TG3_MAJ_NUM) "." __stringify(TG3_MIN_NUM)
-#define DRV_MODULE_RELDATE	"October 14, 2010"
+#define DRV_MODULE_RELDATE	"December 3, 2010"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -1769,9 +1770,9 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up)
 
 	if (tp->link_config.autoneg == AUTONEG_ENABLE &&
 	    current_link_up == 1 &&
-	    (tp->link_config.active_speed == SPEED_1000 ||
-	     (tp->link_config.active_speed == SPEED_100 &&
-	      tp->link_config.active_duplex == DUPLEX_FULL))) {
+	    tp->link_config.active_duplex == DUPLEX_FULL &&
+	    (tp->link_config.active_speed == SPEED_100 ||
+	     tp->link_config.active_speed == SPEED_1000)) {
 		u32 eeectl;
 
 		if (tp->link_config.active_speed == SPEED_1000)
@@ -1781,7 +1782,8 @@ static void tg3_phy_eee_adjust(struct tg3 *tp, u32 current_link_up)
 
 		tw32(TG3_CPMU_EEE_CTRL, eeectl);
 
-		tg3_phy_cl45_read(tp, 0x7, TG3_CL45_D7_EEERES_STAT, &val);
+		tg3_phy_cl45_read(tp, MDIO_MMD_AN,
+				  TG3_CL45_D7_EEERES_STAT, &val);
 
 		if (val == TG3_CL45_D7_EEERES_STAT_LP_1000T ||
 		    val == TG3_CL45_D7_EEERES_STAT_LP_100TX)
@@ -2549,39 +2551,35 @@ static void __tg3_set_mac_addr(struct tg3 *tp, int skip_mac_1)
 	tw32(MAC_TX_BACKOFF_SEED, addr_high);
 }
 
-static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
+static void tg3_enable_register_access(struct tg3 *tp)
 {
-	u32 misc_host_ctrl;
-	bool device_should_wake, do_low_power;
-
-	/* Make sure register accesses (indirect or otherwise)
-	 * will function correctly.
+	/*
+	 * Make sure register accesses (indirect or otherwise) will function
+	 * correctly.
 	 */
 	pci_write_config_dword(tp->pdev,
-			       TG3PCI_MISC_HOST_CTRL,
-			       tp->misc_host_ctrl);
+			       TG3PCI_MISC_HOST_CTRL, tp->misc_host_ctrl);
+}
 
-	switch (state) {
-	case PCI_D0:
-		pci_enable_wake(tp->pdev, state, false);
-		pci_set_power_state(tp->pdev, PCI_D0);
+static int tg3_power_up(struct tg3 *tp)
+{
+	tg3_enable_register_access(tp);
 
-		/* Switch out of Vaux if it is a NIC */
-		if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
-			tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl, 100);
+	pci_set_power_state(tp->pdev, PCI_D0);
 
-		return 0;
+	/* Switch out of Vaux if it is a NIC */
+	if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
+		tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl, 100);
 
-	case PCI_D1:
-	case PCI_D2:
-	case PCI_D3hot:
-		break;
+	return 0;
+}
 
-	default:
-		netdev_err(tp->dev, "Invalid power state (D%d) requested\n",
-			   state);
-		return -EINVAL;
-	}
+static int tg3_power_down_prepare(struct tg3 *tp)
+{
+	u32 misc_host_ctrl;
+	bool device_should_wake, do_low_power;
+
+	tg3_enable_register_access(tp);
 
 	/* Restore the CLKREQ setting. */
 	if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG) {
@@ -2600,8 +2598,7 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 	tw32(TG3PCI_MISC_HOST_CTRL,
 	     misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT);
 
-	device_should_wake = pci_pme_capable(tp->pdev, state) &&
-			     device_may_wakeup(&tp->pdev->dev) &&
+	device_should_wake = device_may_wakeup(&tp->pdev->dev) &&
 			     (tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
 
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
@@ -2728,12 +2725,10 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 		     (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)))
 			mac_mode |= MAC_MODE_KEEP_FRAME_IN_WOL;
 
-		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
-			mac_mode |= tp->mac_mode &
-				    (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
-			if (mac_mode & MAC_MODE_APE_TX_EN)
-				mac_mode |= MAC_MODE_TDE_ENABLE;
-		}
+		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+			mac_mode |= MAC_MODE_APE_TX_EN |
+				    MAC_MODE_APE_RX_EN |
+				    MAC_MODE_TDE_ENABLE;
 
 		tw32_f(MAC_MODE, mac_mode);
 		udelay(100);
@@ -2823,13 +2818,15 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 
 	tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN);
 
-	if (device_should_wake)
-		pci_enable_wake(tp->pdev, state, true);
+	return 0;
+}
 
-	/* Finally, set the new power state. */
-	pci_set_power_state(tp->pdev, state);
+static void tg3_power_down(struct tg3 *tp)
+{
+	tg3_power_down_prepare(tp);
 
-	return 0;
+	pci_wake_from_d3(tp->pdev, tp->tg3_flags & TG3_FLAG_WOL_ENABLE);
+	pci_set_power_state(tp->pdev, PCI_D3hot);
 }
 
 static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)
@@ -2969,7 +2966,7 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
 	}
 
 	if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
-		u32 val = 0;
+		u32 val;
 
 		tw32(TG3_CPMU_EEE_MODE,
 		     tr32(TG3_CPMU_EEE_MODE) & ~TG3_CPMU_EEEMD_LPI_ENABLE);
@@ -2986,19 +2983,18 @@ static void tg3_phy_copper_begin(struct tg3 *tp)
 			tg3_phydsp_write(tp, MII_TG3_DSP_CH34TP2,
 					 val | MII_TG3_DSP_CH34TP2_HIBW01);
 
+		val = 0;
 		if (tp->link_config.autoneg == AUTONEG_ENABLE) {
 			/* Advertise 100-BaseTX EEE ability */
 			if (tp->link_config.advertising &
-			    (ADVERTISED_100baseT_Half |
-			     ADVERTISED_100baseT_Full))
-				val |= TG3_CL45_D7_EEEADV_CAP_100TX;
+			    ADVERTISED_100baseT_Full)
+				val |= MDIO_AN_EEE_ADV_100TX;
 			/* Advertise 1000-BaseT EEE ability */
 			if (tp->link_config.advertising &
-			    (ADVERTISED_1000baseT_Half |
-			     ADVERTISED_1000baseT_Full))
-				val |= TG3_CL45_D7_EEEADV_CAP_1000T;
+			    ADVERTISED_1000baseT_Full)
+				val |= MDIO_AN_EEE_ADV_1000T;
 		}
-		tg3_phy_cl45_write(tp, 0x7, TG3_CL45_D7_EEEADV_CAP, val);
+		tg3_phy_cl45_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
 
 		/* Turn off SM_DSP clock. */
 		val = MII_TG3_AUXCTL_SHDWSEL_AUXCTL |
@@ -5763,7 +5759,7 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb,
 	dma_unmap_addr_set(&tnapi->tx_buffers[entry], mapping, mapping);
 
 	if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
-	    !mss && skb->len > ETH_DATA_LEN)
+	    !mss && skb->len > VLAN_ETH_FRAME_LEN)
 		base_flags |= TXD_FLAG_JMB_PKT;
 
 	tg3_set_txd(tnapi, entry, mapping, len, base_flags,
@@ -5997,7 +5993,7 @@ static netdev_tx_t tg3_start_xmit_dma_bug(struct sk_buff *skb,
 #endif
 
 	if ((tp->tg3_flags3 & TG3_FLG3_USE_JUMBO_BDFLAG) &&
-	    !mss && skb->len > ETH_DATA_LEN)
+	    !mss && skb->len > VLAN_ETH_FRAME_LEN)
 		base_flags |= TXD_FLAG_JMB_PKT;
 
 	len = skb_headlen(skb);
@@ -6339,13 +6335,13 @@ static void tg3_rx_prodring_fini(struct tg3 *tp,
 	kfree(tpr->rx_jmb_buffers);
 	tpr->rx_jmb_buffers = NULL;
 	if (tpr->rx_std) {
-		pci_free_consistent(tp->pdev, TG3_RX_STD_RING_BYTES(tp),
-				    tpr->rx_std, tpr->rx_std_mapping);
+		dma_free_coherent(&tp->pdev->dev, TG3_RX_STD_RING_BYTES(tp),
+				  tpr->rx_std, tpr->rx_std_mapping);
 		tpr->rx_std = NULL;
 	}
 	if (tpr->rx_jmb) {
-		pci_free_consistent(tp->pdev, TG3_RX_JMB_RING_BYTES(tp),
-				    tpr->rx_jmb, tpr->rx_jmb_mapping);
+		dma_free_coherent(&tp->pdev->dev, TG3_RX_JMB_RING_BYTES(tp),
+				  tpr->rx_jmb, tpr->rx_jmb_mapping);
 		tpr->rx_jmb = NULL;
 	}
 }
@@ -6358,8 +6354,10 @@ static int tg3_rx_prodring_init(struct tg3 *tp,
 	if (!tpr->rx_std_buffers)
 		return -ENOMEM;
 
-	tpr->rx_std = pci_alloc_consistent(tp->pdev, TG3_RX_STD_RING_BYTES(tp),
-					   &tpr->rx_std_mapping);
+	tpr->rx_std = dma_alloc_coherent(&tp->pdev->dev,
+					 TG3_RX_STD_RING_BYTES(tp),
+					 &tpr->rx_std_mapping,
+					 GFP_KERNEL);
 	if (!tpr->rx_std)
 		goto err_out;
 
@@ -6370,9 +6368,10 @@ static int tg3_rx_prodring_init(struct tg3 *tp,
 		if (!tpr->rx_jmb_buffers)
 			goto err_out;
 
-		tpr->rx_jmb = pci_alloc_consistent(tp->pdev,
-						   TG3_RX_JMB_RING_BYTES(tp),
-						   &tpr->rx_jmb_mapping);
+		tpr->rx_jmb = dma_alloc_coherent(&tp->pdev->dev,
+						 TG3_RX_JMB_RING_BYTES(tp),
+						 &tpr->rx_jmb_mapping,
+						 GFP_KERNEL);
 		if (!tpr->rx_jmb)
 			goto err_out;
 	}
@@ -6491,7 +6490,7 @@ static void tg3_free_consistent(struct tg3 *tp)
 		struct tg3_napi *tnapi = &tp->napi[i];
 
 		if (tnapi->tx_ring) {
-			pci_free_consistent(tp->pdev, TG3_TX_RING_BYTES,
+			dma_free_coherent(&tp->pdev->dev, TG3_TX_RING_BYTES,
 				tnapi->tx_ring, tnapi->tx_desc_mapping);
 			tnapi->tx_ring = NULL;
 		}
@@ -6500,25 +6499,26 @@ static void tg3_free_consistent(struct tg3 *tp)
 		tnapi->tx_buffers = NULL;
 
 		if (tnapi->rx_rcb) {
-			pci_free_consistent(tp->pdev, TG3_RX_RCB_RING_BYTES(tp),
-					    tnapi->rx_rcb,
-					    tnapi->rx_rcb_mapping);
+			dma_free_coherent(&tp->pdev->dev,
+					  TG3_RX_RCB_RING_BYTES(tp),
+					  tnapi->rx_rcb,
+					  tnapi->rx_rcb_mapping);
 			tnapi->rx_rcb = NULL;
 		}
 
 		tg3_rx_prodring_fini(tp, &tnapi->prodring);
 
 		if (tnapi->hw_status) {
-			pci_free_consistent(tp->pdev, TG3_HW_STATUS_SIZE,
-					    tnapi->hw_status,
-					    tnapi->status_mapping);
+			dma_free_coherent(&tp->pdev->dev, TG3_HW_STATUS_SIZE,
+					  tnapi->hw_status,
+					  tnapi->status_mapping);
 			tnapi->hw_status = NULL;
 		}
 	}
 
 	if (tp->hw_stats) {
-		pci_free_consistent(tp->pdev, sizeof(struct tg3_hw_stats),
-				    tp->hw_stats, tp->stats_mapping);
+		dma_free_coherent(&tp->pdev->dev, sizeof(struct tg3_hw_stats),
+				  tp->hw_stats, tp->stats_mapping);
 		tp->hw_stats = NULL;
 	}
 }
@@ -6531,9 +6531,10 @@ static int tg3_alloc_consistent(struct tg3 *tp)
 {
 	int i;
 
-	tp->hw_stats = pci_alloc_consistent(tp->pdev,
-					    sizeof(struct tg3_hw_stats),
-					    &tp->stats_mapping);
+	tp->hw_stats = dma_alloc_coherent(&tp->pdev->dev,
+					  sizeof(struct tg3_hw_stats),
+					  &tp->stats_mapping,
+					  GFP_KERNEL);
 	if (!tp->hw_stats)
 		goto err_out;
 
@@ -6543,9 +6544,10 @@ static int tg3_alloc_consistent(struct tg3 *tp)
 		struct tg3_napi *tnapi = &tp->napi[i];
 		struct tg3_hw_status *sblk;
 
-		tnapi->hw_status = pci_alloc_consistent(tp->pdev,
-							TG3_HW_STATUS_SIZE,
-							&tnapi->status_mapping);
+		tnapi->hw_status = dma_alloc_coherent(&tp->pdev->dev,
+						      TG3_HW_STATUS_SIZE,
+						      &tnapi->status_mapping,
+						      GFP_KERNEL);
 		if (!tnapi->hw_status)
 			goto err_out;
 
@@ -6566,9 +6568,10 @@ static int tg3_alloc_consistent(struct tg3 *tp)
 			if (!tnapi->tx_buffers)
 				goto err_out;
 
-			tnapi->tx_ring = pci_alloc_consistent(tp->pdev,
-							      TG3_TX_RING_BYTES,
-						       &tnapi->tx_desc_mapping);
+			tnapi->tx_ring = dma_alloc_coherent(&tp->pdev->dev,
+							    TG3_TX_RING_BYTES,
+							&tnapi->tx_desc_mapping,
+							    GFP_KERNEL);
 			if (!tnapi->tx_ring)
 				goto err_out;
 		}
@@ -6601,9 +6604,10 @@ static int tg3_alloc_consistent(struct tg3 *tp)
 		if (!i && (tp->tg3_flags3 & TG3_FLG3_ENABLE_RSS))
 			continue;
 
-		tnapi->rx_rcb = pci_alloc_consistent(tp->pdev,
-						     TG3_RX_RCB_RING_BYTES(tp),
-						     &tnapi->rx_rcb_mapping);
+		tnapi->rx_rcb = dma_alloc_coherent(&tp->pdev->dev,
+						   TG3_RX_RCB_RING_BYTES(tp),
+						   &tnapi->rx_rcb_mapping,
+						   GFP_KERNEL);
 		if (!tnapi->rx_rcb)
 			goto err_out;
 
@@ -6987,7 +6991,7 @@ static void tg3_restore_pci_state(struct tg3 *tp)
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785) {
 		if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
-			pcie_set_readrq(tp->pdev, 4096);
+			pcie_set_readrq(tp->pdev, tp->pcie_readrq);
 		else {
 			pci_write_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE,
 					      tp->pci_cacheline_sz);
@@ -7181,7 +7185,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 				      tp->pcie_cap + PCI_EXP_DEVCTL,
 				      val16);
 
-		pcie_set_readrq(tp->pdev, 4096);
+		pcie_set_readrq(tp->pdev, tp->pcie_readrq);
 
 		/* Clear error status */
 		pci_write_config_word(tp->pdev,
@@ -7222,19 +7226,21 @@ static int tg3_chip_reset(struct tg3 *tp)
 		tw32(TG3PCI_CLOCK_CTRL, tp->pci_clock_ctrl);
 	}
 
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+		tp->mac_mode = MAC_MODE_APE_TX_EN |
+			       MAC_MODE_APE_RX_EN |
+			       MAC_MODE_TDE_ENABLE;
+
 	if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES) {
-		tp->mac_mode = MAC_MODE_PORT_MODE_TBI;
-		tw32_f(MAC_MODE, tp->mac_mode);
+		tp->mac_mode |= MAC_MODE_PORT_MODE_TBI;
+		val = tp->mac_mode;
 	} else if (tp->phy_flags & TG3_PHYFLG_MII_SERDES) {
-		tp->mac_mode = MAC_MODE_PORT_MODE_GMII;
-		tw32_f(MAC_MODE, tp->mac_mode);
-	} else if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
-		tp->mac_mode &= (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
-		if (tp->mac_mode & MAC_MODE_APE_TX_EN)
-			tp->mac_mode |= MAC_MODE_TDE_ENABLE;
-		tw32_f(MAC_MODE, tp->mac_mode);
+		tp->mac_mode |= MAC_MODE_PORT_MODE_GMII;
+		val = tp->mac_mode;
 	} else
-		tw32_f(MAC_MODE, 0);
+		val = 0;
+
+	tw32_f(MAC_MODE, val);
 	udelay(40);
 
 	tg3_ape_unlock(tp, TG3_APE_LOCK_GRC);
@@ -7801,6 +7807,37 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	if (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE)
 		tg3_abort_hw(tp, 1);
 
+	/* Enable MAC control of LPI */
+	if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
+		tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL,
+		       TG3_CPMU_EEE_LNKIDL_PCIE_NL0 |
+		       TG3_CPMU_EEE_LNKIDL_UART_IDL);
+
+		tw32_f(TG3_CPMU_EEE_CTRL,
+		       TG3_CPMU_EEE_CTRL_EXIT_20_1_US);
+
+		val = TG3_CPMU_EEEMD_ERLY_L1_XIT_DET |
+		      TG3_CPMU_EEEMD_LPI_IN_TX |
+		      TG3_CPMU_EEEMD_LPI_IN_RX |
+		      TG3_CPMU_EEEMD_EEE_ENABLE;
+
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5717)
+			val |= TG3_CPMU_EEEMD_SND_IDX_DET_EN;
+
+		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+			val |= TG3_CPMU_EEEMD_APE_TX_DET_EN;
+
+		tw32_f(TG3_CPMU_EEE_MODE, val);
+
+		tw32_f(TG3_CPMU_EEE_DBTMR1,
+		       TG3_CPMU_DBTMR1_PCIEXIT_2047US |
+		       TG3_CPMU_DBTMR1_LNKIDLE_2047US);
+
+		tw32_f(TG3_CPMU_EEE_DBTMR2,
+		       TG3_CPMU_DBTMR1_APE_TX_2047US |
+		       TG3_CPMU_DBTMR2_TXIDXEQ_2047US);
+	}
+
 	if (reset_phy)
 		tg3_phy_reset(tp);
 
@@ -7860,18 +7897,21 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		tw32(GRC_MODE, grc_mode);
 	}
 
-	if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) {
-		u32 grc_mode = tr32(GRC_MODE);
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765) {
+		if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) {
+			u32 grc_mode = tr32(GRC_MODE);
 
-		/* Access the lower 1K of PL PCIE block registers. */
-		val = grc_mode & ~GRC_MODE_PCIE_PORT_MASK;
-		tw32(GRC_MODE, val | GRC_MODE_PCIE_PL_SEL);
+			/* Access the lower 1K of PL PCIE block registers. */
+			val = grc_mode & ~GRC_MODE_PCIE_PORT_MASK;
+			tw32(GRC_MODE, val | GRC_MODE_PCIE_PL_SEL);
 
-		val = tr32(TG3_PCIE_TLDLPL_PORT + TG3_PCIE_PL_LO_PHYCTL5);
-		tw32(TG3_PCIE_TLDLPL_PORT + TG3_PCIE_PL_LO_PHYCTL5,
-		     val | TG3_PCIE_PL_LO_PHYCTL5_DIS_L2CLKREQ);
+			val = tr32(TG3_PCIE_TLDLPL_PORT +
+				   TG3_PCIE_PL_LO_PHYCTL5);
+			tw32(TG3_PCIE_TLDLPL_PORT + TG3_PCIE_PL_LO_PHYCTL5,
+			     val | TG3_PCIE_PL_LO_PHYCTL5_DIS_L2CLKREQ);
 
-		tw32(GRC_MODE, grc_mode);
+			tw32(GRC_MODE, grc_mode);
+		}
 
 		val = tr32(TG3_CPMU_LSPD_10MB_CLK);
 		val &= ~CPMU_LSPD_10MB_MACCLK_MASK;
@@ -7879,22 +7919,6 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		tw32(TG3_CPMU_LSPD_10MB_CLK, val);
 	}
 
-	/* Enable MAC control of LPI */
-	if (tp->phy_flags & TG3_PHYFLG_EEE_CAP) {
-		tw32_f(TG3_CPMU_EEE_LNKIDL_CTRL,
-		       TG3_CPMU_EEE_LNKIDL_PCIE_NL0 |
-		       TG3_CPMU_EEE_LNKIDL_UART_IDL);
-
-		tw32_f(TG3_CPMU_EEE_CTRL,
-		       TG3_CPMU_EEE_CTRL_EXIT_20_1_US);
-
-		tw32_f(TG3_CPMU_EEE_MODE,
-		       TG3_CPMU_EEEMD_ERLY_L1_XIT_DET |
-		       TG3_CPMU_EEEMD_LPI_IN_TX |
-		       TG3_CPMU_EEEMD_LPI_IN_RX |
-		       TG3_CPMU_EEEMD_EEE_ENABLE);
-	}
-
 	/* This works around an issue with Athlon chipsets on
 	 * B3 tigon3 silicon.  This bit has no effect on any
 	 * other revision.  But do not set this on PCI Express
@@ -8162,8 +8186,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		      RDMAC_MODE_FIFOURUN_ENAB | RDMAC_MODE_FIFOOREAD_ENAB |
 		      RDMAC_MODE_LNGREAD_ENAB);
 
-	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717 ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719)
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717)
 		rdmac_mode |= RDMAC_MODE_MULT_DMA_RD_DIS;
 
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
@@ -8203,6 +8226,10 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780 ||
 	    (tp->tg3_flags3 & TG3_FLG3_5717_PLUS)) {
 		val = tr32(TG3_RDMA_RSRVCTRL_REG);
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+			val &= ~TG3_RDMA_RSRVCTRL_TXMRGN_MASK;
+			val |= TG3_RDMA_RSRVCTRL_TXMRGN_320B;
+		}
 		tw32(TG3_RDMA_RSRVCTRL_REG,
 		     val | TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX);
 	}
@@ -8280,7 +8307,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 	}
 
 	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
-		tp->mac_mode &= MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
+		tp->mac_mode = MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
 	else
 		tp->mac_mode = 0;
 	tp->mac_mode |= MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
@@ -9031,8 +9058,14 @@ static bool tg3_enable_msix(struct tg3 *tp)
 		pci_disable_msix(tp->pdev);
 		return false;
 	}
-	if (tp->irq_cnt > 1)
+
+	if (tp->irq_cnt > 1) {
 		tp->tg3_flags3 |= TG3_FLG3_ENABLE_RSS;
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+			tp->tg3_flags3 |= TG3_FLG3_ENABLE_TSS;
+			netif_set_real_num_tx_queues(tp->dev, tp->irq_cnt - 1);
+		}
+	}
 
 	return true;
 }
@@ -9101,7 +9134,7 @@ static int tg3_open(struct net_device *dev)
 
 	netif_carrier_off(tp->dev);
 
-	err = tg3_set_power_state(tp, PCI_D0);
+	err = tg3_power_up(tp);
 	if (err)
 		return err;
 
@@ -9266,7 +9299,7 @@ static int tg3_close(struct net_device *dev)
 
 	tg3_free_consistent(tp);
 
-	tg3_set_power_state(tp, PCI_D3hot);
+	tg3_power_down(tp);
 
 	netif_carrier_off(tp->dev);
 
@@ -11068,7 +11101,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
 	struct tg3 *tp = netdev_priv(dev);
 
 	if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
-		tg3_set_power_state(tp, PCI_D0);
+		tg3_power_up(tp);
 
 	memset(data, 0, sizeof(u64) * TG3_NUM_TEST);
 
@@ -11136,7 +11169,7 @@ static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest,
 			tg3_phy_start(tp);
 	}
 	if (tp->phy_flags & TG3_PHYFLG_IS_LOW_POWER)
-		tg3_set_power_state(tp, PCI_D3hot);
+		tg3_power_down(tp);
 
 }
 
@@ -12411,8 +12444,9 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
 		if (cfg2 & (1 << 18))
 			tp->phy_flags |= TG3_PHYFLG_SERDES_PREEMPHASIS;
 
-		if (((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
-		      GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX)) &&
+		if (((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) ||
+		    ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+		      GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX))) &&
 		    (cfg2 & NIC_SRAM_DATA_CFG_2_APD_EN))
 			tp->phy_flags |= TG3_PHYFLG_ENABLE_APD;
 
@@ -12548,9 +12582,11 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 		}
 	}
 
-	if (tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 ||
-	    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
-	     tp->pci_chip_rev_id != CHIPREV_ID_57765_A0))
+	if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
+	    ((tp->pdev->device == TG3PCI_DEVICE_TIGON3_5718 &&
+	      tp->pci_chip_rev_id != CHIPREV_ID_5717_A0) ||
+	     (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57765 &&
+	      tp->pci_chip_rev_id != CHIPREV_ID_57765_A0)))
 		tp->phy_flags |= TG3_PHYFLG_EEE_CAP;
 
 	if (!(tp->phy_flags & TG3_PHYFLG_ANY_SERDES) &&
@@ -12658,7 +12694,7 @@ static void __devinit tg3_read_vpd(struct tg3 *tp)
 			cnt = pci_read_vpd(tp->pdev, pos,
 					   TG3_NVM_VPD_LEN - pos,
 					   &vpd_data[pos]);
-			if (cnt == -ETIMEDOUT || -EINTR)
+			if (cnt == -ETIMEDOUT || cnt == -EINTR)
 				cnt = 0;
 			else if (cnt < 0)
 				goto out_not_found;
@@ -13047,17 +13083,15 @@ static inline u32 tg3_rx_ret_ring_size(struct tg3 *tp)
 		return 512;
 }
 
+DEFINE_PCI_DEVICE_TABLE(write_reorder_chipsets) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8385_0) },
+	{ },
+};
+
 static int __devinit tg3_get_invariants(struct tg3 *tp)
 {
-	static struct pci_device_id write_reorder_chipsets[] = {
-		{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
-			     PCI_DEVICE_ID_AMD_FE_GATE_700C) },
-		{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
-			     PCI_DEVICE_ID_AMD_8131_BRIDGE) },
-		{ PCI_DEVICE(PCI_VENDOR_ID_VIA,
-			     PCI_DEVICE_ID_VIA_8385_0) },
-		{ },
-	};
 	u32 misc_ctrl_reg;
 	u32 pci_state_reg, grc_misc_cfg;
 	u32 val;
@@ -13359,7 +13393,45 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 
 		tp->tg3_flags2 |= TG3_FLG2_PCI_EXPRESS;
 
-		pcie_set_readrq(tp->pdev, 4096);
+		tp->pcie_readrq = 4096;
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5719) {
+			u16 word;
+
+			pci_read_config_word(tp->pdev,
+					     tp->pcie_cap + PCI_EXP_LNKSTA,
+					     &word);
+			switch (word & PCI_EXP_LNKSTA_CLS) {
+			case PCI_EXP_LNKSTA_CLS_2_5GB:
+				word &= PCI_EXP_LNKSTA_NLW;
+				word >>= PCI_EXP_LNKSTA_NLW_SHIFT;
+				switch (word) {
+				case 2:
+					tp->pcie_readrq = 2048;
+					break;
+				case 4:
+					tp->pcie_readrq = 1024;
+					break;
+				}
+				break;
+
+			case PCI_EXP_LNKSTA_CLS_5_0GB:
+				word &= PCI_EXP_LNKSTA_NLW;
+				word >>= PCI_EXP_LNKSTA_NLW_SHIFT;
+				switch (word) {
+				case 1:
+					tp->pcie_readrq = 2048;
+					break;
+				case 2:
+					tp->pcie_readrq = 1024;
+					break;
+				case 4:
+					tp->pcie_readrq = 512;
+					break;
+				}
+			}
+		}
+
+		pcie_set_readrq(tp->pdev, tp->pcie_readrq);
 
 		pci_read_config_word(tp->pdev,
 				     tp->pcie_cap + PCI_EXP_LNKCTL,
@@ -13546,7 +13618,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	    (tp->tg3_flags3 & TG3_FLG3_5717_PLUS))
 		tp->tg3_flags |= TG3_FLAG_CPMU_PRESENT;
 
-	/* Set up tp->grc_local_ctrl before calling tg3_set_power_state().
+	/* Set up tp->grc_local_ctrl before calling tg_power_up().
 	 * GPIO1 driven high will bring 5700's external PHY out of reset.
 	 * It is also used as eeprom write protect on LOMs.
 	 */
@@ -13577,7 +13649,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	}
 
 	/* Force the chip into D0. */
-	err = tg3_set_power_state(tp, PCI_D0);
+	err = tg3_power_up(tp);
 	if (err) {
 		dev_err(&tp->pdev->dev, "Transition to D0 failed\n");
 		return err;
@@ -13722,8 +13794,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 
 	/* Preserve the APE MAC_MODE bits */
 	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
-		tp->mac_mode = tr32(MAC_MODE) |
-			       MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
+		tp->mac_mode = MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
 	else
 		tp->mac_mode = TG3_DEF_MAC_MODE;
 
@@ -14153,13 +14224,19 @@ static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dm
 
 #define TEST_BUFFER_SIZE	0x2000
 
+DEFINE_PCI_DEVICE_TABLE(dma_wait_state_chipsets) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_PCI15) },
+	{ },
+};
+
 static int __devinit tg3_test_dma(struct tg3 *tp)
 {
 	dma_addr_t buf_dma;
 	u32 *buf, saved_dma_rwctrl;
 	int ret = 0;
 
-	buf = pci_alloc_consistent(tp->pdev, TEST_BUFFER_SIZE, &buf_dma);
+	buf = dma_alloc_coherent(&tp->pdev->dev, TEST_BUFFER_SIZE,
+				 &buf_dma, GFP_KERNEL);
 	if (!buf) {
 		ret = -ENOMEM;
 		goto out_nofree;
@@ -14321,11 +14398,6 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 	}
 	if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) !=
 	    DMA_RWCTRL_WRITE_BNDRY_16) {
-		static struct pci_device_id dma_wait_state_chipsets[] = {
-			{ PCI_DEVICE(PCI_VENDOR_ID_APPLE,
-				     PCI_DEVICE_ID_APPLE_UNI_N_PCI15) },
-			{ },
-		};
 
 		/* DMA test passed without adjusting DMA boundary,
 		 * now look for chipsets that are known to expose the
@@ -14343,7 +14415,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp)
 	}
 
 out:
-	pci_free_consistent(tp->pdev, TEST_BUFFER_SIZE, buf, buf_dma);
+	dma_free_coherent(&tp->pdev->dev, TEST_BUFFER_SIZE, buf, buf_dma);
 out_nofree:
 	return ret;
 }
@@ -14957,7 +15029,7 @@ static void __devexit tg3_remove_one(struct pci_dev *pdev)
 		if (tp->fw)
 			release_firmware(tp->fw);
 
-		flush_scheduled_work();
+		cancel_work_sync(&tp->reset_task);
 
 		if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
 			tg3_phy_fini(tp);
@@ -14980,23 +15052,18 @@ static void __devexit tg3_remove_one(struct pci_dev *pdev)
 	}
 }
 
-static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int tg3_suspend(struct device *device)
 {
+	struct pci_dev *pdev = to_pci_dev(device);
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct tg3 *tp = netdev_priv(dev);
-	pci_power_t target_state;
 	int err;
 
-	/* PCI register 4 needs to be saved whether netif_running() or not.
-	 * MSI address and data need to be saved if using MSI and
-	 * netif_running().
-	 */
-	pci_save_state(pdev);
-
 	if (!netif_running(dev))
 		return 0;
 
-	flush_scheduled_work();
+	flush_work_sync(&tp->reset_task);
 	tg3_phy_stop(tp);
 	tg3_netif_stop(tp);
 
@@ -15013,9 +15080,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state)
 	tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE;
 	tg3_full_unlock(tp);
 
-	target_state = pdev->pm_cap ? pci_target_state(pdev) : PCI_D3hot;
-
-	err = tg3_set_power_state(tp, target_state);
+	err = tg3_power_down_prepare(tp);
 	if (err) {
 		int err2;
 
@@ -15042,21 +15107,16 @@ out:
 	return err;
 }
 
-static int tg3_resume(struct pci_dev *pdev)
+static int tg3_resume(struct device *device)
 {
+	struct pci_dev *pdev = to_pci_dev(device);
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct tg3 *tp = netdev_priv(dev);
 	int err;
 
-	pci_restore_state(tp->pdev);
-
 	if (!netif_running(dev))
 		return 0;
 
-	err = tg3_set_power_state(tp, PCI_D0);
-	if (err)
-		return err;
-
 	netif_device_attach(dev);
 
 	tg3_full_lock(tp, 0);
@@ -15080,13 +15140,21 @@ out:
 	return err;
 }
 
+static SIMPLE_DEV_PM_OPS(tg3_pm_ops, tg3_suspend, tg3_resume);
+#define TG3_PM_OPS (&tg3_pm_ops)
+
+#else
+
+#define TG3_PM_OPS NULL
+
+#endif /* CONFIG_PM_SLEEP */
+
 static struct pci_driver tg3_driver = {
 	.name		= DRV_MODULE_NAME,
 	.id_table	= tg3_pci_tbl,
 	.probe		= tg3_init_one,
 	.remove		= __devexit_p(tg3_remove_one),
-	.suspend	= tg3_suspend,
-	.resume		= tg3_resume
+	.driver.pm	= TG3_PM_OPS,
 };
 
 static int __init tg3_init(void)
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 4a1974804b9..d62c8d937c8 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1094,13 +1094,19 @@
 /* 0x3664 --> 0x36b0 unused */
 
 #define TG3_CPMU_EEE_MODE		0x000036b0
-#define TG3_CPMU_EEEMD_ERLY_L1_XIT_DET	 0x00000008
-#define TG3_CPMU_EEEMD_LPI_ENABLE	 0x00000080
-#define TG3_CPMU_EEEMD_LPI_IN_TX	 0x00000100
-#define TG3_CPMU_EEEMD_LPI_IN_RX	 0x00000200
-#define TG3_CPMU_EEEMD_EEE_ENABLE	 0x00100000
-/* 0x36b4 --> 0x36b8 unused */
-
+#define  TG3_CPMU_EEEMD_APE_TX_DET_EN	 0x00000004
+#define  TG3_CPMU_EEEMD_ERLY_L1_XIT_DET	 0x00000008
+#define  TG3_CPMU_EEEMD_SND_IDX_DET_EN	 0x00000040
+#define  TG3_CPMU_EEEMD_LPI_ENABLE	 0x00000080
+#define  TG3_CPMU_EEEMD_LPI_IN_TX	 0x00000100
+#define  TG3_CPMU_EEEMD_LPI_IN_RX	 0x00000200
+#define  TG3_CPMU_EEEMD_EEE_ENABLE	 0x00100000
+#define TG3_CPMU_EEE_DBTMR1		0x000036b4
+#define  TG3_CPMU_DBTMR1_PCIEXIT_2047US	 0x07ff0000
+#define  TG3_CPMU_DBTMR1_LNKIDLE_2047US	 0x000070ff
+#define TG3_CPMU_EEE_DBTMR2		0x000036b8
+#define  TG3_CPMU_DBTMR1_APE_TX_2047US	 0x07ff0000
+#define  TG3_CPMU_DBTMR2_TXIDXEQ_2047US	 0x000070ff
 #define TG3_CPMU_EEE_LNKIDL_CTRL	0x000036bc
 #define  TG3_CPMU_EEE_LNKIDL_PCIE_NL0	 0x01000000
 #define  TG3_CPMU_EEE_LNKIDL_UART_IDL	 0x00000004
@@ -1327,6 +1333,8 @@
 
 #define TG3_RDMA_RSRVCTRL_REG		0x00004900
 #define TG3_RDMA_RSRVCTRL_FIFO_OFLW_FIX	 0x00000004
+#define TG3_RDMA_RSRVCTRL_TXMRGN_320B	 0x28000000
+#define TG3_RDMA_RSRVCTRL_TXMRGN_MASK	 0xffe00000
 /* 0x4904 --> 0x4910 unused */
 
 #define TG3_LSO_RD_DMA_CRPTEN_CTRL	0x00004910
@@ -2170,9 +2178,6 @@
 #define MII_TG3_TEST1_CRC_EN		0x8000
 
 /* Clause 45 expansion registers */
-#define TG3_CL45_D7_EEEADV_CAP		0x003c
-#define TG3_CL45_D7_EEEADV_CAP_100TX	0x0002
-#define TG3_CL45_D7_EEEADV_CAP_1000T	0x0004
 #define TG3_CL45_D7_EEERES_STAT		0x803e
 #define TG3_CL45_D7_EEERES_STAT_LP_100TX	0x0002
 #define TG3_CL45_D7_EEERES_STAT_LP_1000T	0x0004
@@ -2562,10 +2567,6 @@ struct ring_info {
 	DEFINE_DMA_UNMAP_ADDR(mapping);
 };
 
-struct tg3_config_info {
-	u32				flags;
-};
-
 struct tg3_link_config {
 	/* Describes what we're trying to get. */
 	u32				advertising;
@@ -2713,17 +2714,17 @@ struct tg3_napi {
 	u32				last_irq_tag;
 	u32				int_mbox;
 	u32				coal_now;
-	u32				tx_prod;
-	u32				tx_cons;
-	u32				tx_pending;
-	u32				prodmbox;
 
-	u32				consmbox;
+	u32				consmbox ____cacheline_aligned;
 	u32				rx_rcb_ptr;
 	u16				*rx_rcb_prod_idx;
 	struct tg3_rx_prodring_set	prodring;
-
 	struct tg3_rx_buffer_desc	*rx_rcb;
+
+	u32				tx_prod	____cacheline_aligned;
+	u32				tx_cons;
+	u32				tx_pending;
+	u32				prodmbox;
 	struct tg3_tx_buffer_desc	*tx_ring;
 	struct ring_info		*tx_buffers;
 
@@ -2946,6 +2947,7 @@ struct tg3 {
 	int				pcix_cap;
 	int				pcie_cap;
 	};
+	int				pcie_readrq;
 
 	struct mii_bus			*mdio_bus;
 	int				mdio_irq[PHY_MAX_ADDR];
diff --git a/drivers/net/tile/Makefile b/drivers/net/tile/Makefile
new file mode 100644
index 00000000000..f634f142cab
--- /dev/null
+++ b/drivers/net/tile/Makefile
@@ -0,0 +1,10 @@
+#
+# Makefile for the TILE on-chip networking support.
+#
+
+obj-$(CONFIG_TILE_NET) += tile_net.o
+ifdef CONFIG_TILEGX
+tile_net-objs := tilegx.o mpipe.o iorpc_mpipe.o dma_queue.o
+else
+tile_net-objs := tilepro.o
+endif
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c
new file mode 100644
index 00000000000..0e6bac5ec65
--- /dev/null
+++ b/drivers/net/tile/tilepro.c
@@ -0,0 +1,2406 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/moduleparam.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>      /* printk() */
+#include <linux/slab.h>        /* kmalloc() */
+#include <linux/errno.h>       /* error codes */
+#include <linux/types.h>       /* size_t */
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>   /* struct device, and other headers */
+#include <linux/etherdevice.h> /* eth_type_trans */
+#include <linux/skbuff.h>
+#include <linux/ioctl.h>
+#include <linux/cdev.h>
+#include <linux/hugetlb.h>
+#include <linux/in6.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <asm/checksum.h>
+#include <asm/homecache.h>
+
+#include <hv/drv_xgbe_intf.h>
+#include <hv/drv_xgbe_impl.h>
+#include <hv/hypervisor.h>
+#include <hv/netio_intf.h>
+
+/* For TSO */
+#include <linux/ip.h>
+#include <linux/tcp.h>
+
+
+/* There is no singlethread_cpu, so schedule work on the current cpu. */
+#define singlethread_cpu -1
+
+
+/*
+ * First, "tile_net_init_module()" initializes all four "devices" which
+ * can be used by linux.
+ *
+ * Then, "ifconfig DEVICE up" calls "tile_net_open()", which analyzes
+ * the network cpus, then uses "tile_net_open_aux()" to initialize
+ * LIPP/LEPP, and then uses "tile_net_open_inner()" to register all
+ * the tiles, provide buffers to LIPP, allow ingress to start, and
+ * turn on hypervisor interrupt handling (and NAPI) on all tiles.
+ *
+ * If registration fails due to the link being down, then "retry_work"
+ * is used to keep calling "tile_net_open_inner()" until it succeeds.
+ *
+ * If "ifconfig DEVICE down" is called, it uses "tile_net_stop()" to
+ * stop egress, drain the LIPP buffers, unregister all the tiles, stop
+ * LIPP/LEPP, and wipe the LEPP queue.
+ *
+ * We start out with the ingress interrupt enabled on each CPU.  When
+ * this interrupt fires, we disable it, and call "napi_schedule()".
+ * This will cause "tile_net_poll()" to be called, which will pull
+ * packets from the netio queue, filtering them out, or passing them
+ * to "netif_receive_skb()".  If our budget is exhausted, we will
+ * return, knowing we will be called again later.  Otherwise, we
+ * reenable the ingress interrupt, and call "napi_complete()".
+ *
+ *
+ * NOTE: The use of "native_driver" ensures that EPP exists, and that
+ * "epp_sendv" is legal, and that "LIPP" is being used.
+ *
+ * NOTE: Failing to free completions for an arbitrarily long time
+ * (which is defined to be illegal) does in fact cause bizarre
+ * problems.  The "egress_timer" helps prevent this from happening.
+ *
+ * NOTE: The egress code can be interrupted by the interrupt handler.
+ */
+
+
+/* HACK: Allow use of "jumbo" packets. */
+/* This should be 1500 if "jumbo" is not set in LIPP. */
+/* This should be at most 10226 (10240 - 14) if "jumbo" is set in LIPP. */
+/* ISSUE: This has not been thoroughly tested (except at 1500). */
+#define TILE_NET_MTU 1500
+
+/* HACK: Define to support GSO. */
+/* ISSUE: This may actually hurt performance of the TCP blaster. */
+/* #define TILE_NET_GSO */
+
+/* Define this to collapse "duplicate" acks. */
+/* #define IGNORE_DUP_ACKS */
+
+/* HACK: Define this to verify incoming packets. */
+/* #define TILE_NET_VERIFY_INGRESS */
+
+/* Use 3000 to enable the Linux Traffic Control (QoS) layer, else 0. */
+#define TILE_NET_TX_QUEUE_LEN 0
+
+/* Define to dump packets (prints out the whole packet on tx and rx). */
+/* #define TILE_NET_DUMP_PACKETS */
+
+/* Define to enable debug spew (all PDEBUG's are enabled). */
+/* #define TILE_NET_DEBUG */
+
+
+/* Define to activate paranoia checks. */
+/* #define TILE_NET_PARANOIA */
+
+/* Default transmit lockup timeout period, in jiffies. */
+#define TILE_NET_TIMEOUT (5 * HZ)
+
+/* Default retry interval for bringing up the NetIO interface, in jiffies. */
+#define TILE_NET_RETRY_INTERVAL (5 * HZ)
+
+/* Number of ports (xgbe0, xgbe1, gbe0, gbe1). */
+#define TILE_NET_DEVS 4
+
+
+
+/* Paranoia. */
+#if NET_IP_ALIGN != LIPP_PACKET_PADDING
+#error "NET_IP_ALIGN must match LIPP_PACKET_PADDING."
+#endif
+
+
+/* Debug print. */
+#ifdef TILE_NET_DEBUG
+#define PDEBUG(fmt, args...) net_printk(fmt, ## args)
+#else
+#define PDEBUG(fmt, args...)
+#endif
+
+
+MODULE_AUTHOR("Tilera");
+MODULE_LICENSE("GPL");
+
+
+#define IS_MULTICAST(mac_addr) \
+	(((u8 *)(mac_addr))[0] & 0x01)
+
+#define IS_BROADCAST(mac_addr) \
+	(((u16 *)(mac_addr))[0] == 0xffff)
+
+
+/*
+ * Queue of incoming packets for a specific cpu and device.
+ *
+ * Includes a pointer to the "system" data, and the actual "user" data.
+ */
+struct tile_netio_queue {
+	netio_queue_impl_t *__system_part;
+	netio_queue_user_impl_t __user_part;
+
+};
+
+
+/*
+ * Statistics counters for a specific cpu and device.
+ */
+struct tile_net_stats_t {
+	u32 rx_packets;
+	u32 rx_bytes;
+	u32 tx_packets;
+	u32 tx_bytes;
+};
+
+
+/*
+ * Info for a specific cpu and device.
+ *
+ * ISSUE: There is a "dev" pointer in "napi" as well.
+ */
+struct tile_net_cpu {
+	/* The NAPI struct. */
+	struct napi_struct napi;
+	/* Packet queue. */
+	struct tile_netio_queue queue;
+	/* Statistics. */
+	struct tile_net_stats_t stats;
+	/* ISSUE: Is this needed? */
+	bool napi_enabled;
+	/* True if this tile has succcessfully registered with the IPP. */
+	bool registered;
+	/* True if the link was down last time we tried to register. */
+	bool link_down;
+	/* True if "egress_timer" is scheduled. */
+	bool egress_timer_scheduled;
+	/* Number of small sk_buffs which must still be provided. */
+	unsigned int num_needed_small_buffers;
+	/* Number of large sk_buffs which must still be provided. */
+	unsigned int num_needed_large_buffers;
+	/* A timer for handling egress completions. */
+	struct timer_list egress_timer;
+};
+
+
+/*
+ * Info for a specific device.
+ */
+struct tile_net_priv {
+	/* Our network device. */
+	struct net_device *dev;
+	/* The actual egress queue. */
+	lepp_queue_t *epp_queue;
+	/* Protects "epp_queue->cmd_tail" and "epp_queue->comp_tail" */
+	spinlock_t cmd_lock;
+	/* Protects "epp_queue->comp_head". */
+	spinlock_t comp_lock;
+	/* The hypervisor handle for this interface. */
+	int hv_devhdl;
+	/* The intr bit mask that IDs this device. */
+	u32 intr_id;
+	/* True iff "tile_net_open_aux()" has succeeded. */
+	int partly_opened;
+	/* True iff "tile_net_open_inner()" has succeeded. */
+	int fully_opened;
+	/* Effective network cpus. */
+	struct cpumask network_cpus_map;
+	/* Number of network cpus. */
+	int network_cpus_count;
+	/* Credits per network cpu. */
+	int network_cpus_credits;
+	/* Network stats. */
+	struct net_device_stats stats;
+	/* For NetIO bringup retries. */
+	struct delayed_work retry_work;
+	/* Quick access to per cpu data. */
+	struct tile_net_cpu *cpu[NR_CPUS];
+};
+
+
+/*
+ * The actual devices (xgbe0, xgbe1, gbe0, gbe1).
+ */
+static struct net_device *tile_net_devs[TILE_NET_DEVS];
+
+/*
+ * The "tile_net_cpu" structures for each device.
+ */
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_xgbe0);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_xgbe1);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_gbe0);
+static DEFINE_PER_CPU(struct tile_net_cpu, hv_gbe1);
+
+
+/*
+ * True if "network_cpus" was specified.
+ */
+static bool network_cpus_used;
+
+/*
+ * The actual cpus in "network_cpus".
+ */
+static struct cpumask network_cpus_map;
+
+
+
+#ifdef TILE_NET_DEBUG
+/*
+ * printk with extra stuff.
+ *
+ * We print the CPU we're running in brackets.
+ */
+static void net_printk(char *fmt, ...)
+{
+	int i;
+	int len;
+	va_list args;
+	static char buf[256];
+
+	len = sprintf(buf, "tile_net[%2.2d]: ", smp_processor_id());
+	va_start(args, fmt);
+	i = vscnprintf(buf + len, sizeof(buf) - len - 1, fmt, args);
+	va_end(args);
+	buf[255] = '\0';
+	pr_notice(buf);
+}
+#endif
+
+
+#ifdef TILE_NET_DUMP_PACKETS
+/*
+ * Dump a packet.
+ */
+static void dump_packet(unsigned char *data, unsigned long length, char *s)
+{
+	unsigned long i;
+	static unsigned int count;
+
+	pr_info("dump_packet(data %p, length 0x%lx s %s count 0x%x)\n",
+	       data, length, s, count++);
+
+	pr_info("\n");
+
+	for (i = 0; i < length; i++) {
+		if ((i & 0xf) == 0)
+			sprintf(buf, "%8.8lx:", i);
+		sprintf(buf + strlen(buf), " %2.2x", data[i]);
+		if ((i & 0xf) == 0xf || i == length - 1)
+			pr_info("%s\n", buf);
+	}
+}
+#endif
+
+
+/*
+ * Provide support for the __netio_fastio1() swint
+ * (see <hv/drv_xgbe_intf.h> for how it is used).
+ *
+ * The fastio swint2 call may clobber all the caller-saved registers.
+ * It rarely clobbers memory, but we allow for the possibility in
+ * the signature just to be on the safe side.
+ *
+ * Also, gcc doesn't seem to allow an input operand to be
+ * clobbered, so we fake it with dummy outputs.
+ *
+ * This function can't be static because of the way it is declared
+ * in the netio header.
+ */
+inline int __netio_fastio1(u32 fastio_index, u32 arg0)
+{
+	long result, clobber_r1, clobber_r10;
+	asm volatile("swint2"
+		     : "=R00" (result),
+		       "=R01" (clobber_r1), "=R10" (clobber_r10)
+		     : "R10" (fastio_index), "R01" (arg0)
+		     : "memory", "r2", "r3", "r4",
+		       "r5", "r6", "r7", "r8", "r9",
+		       "r11", "r12", "r13", "r14",
+		       "r15", "r16", "r17", "r18", "r19",
+		       "r20", "r21", "r22", "r23", "r24",
+		       "r25", "r26", "r27", "r28", "r29");
+	return result;
+}
+
+
+/*
+ * Provide a linux buffer to LIPP.
+ */
+static void tile_net_provide_linux_buffer(struct tile_net_cpu *info,
+					  void *va, bool small)
+{
+	struct tile_netio_queue *queue = &info->queue;
+
+	/* Convert "va" and "small" to "linux_buffer_t". */
+	unsigned int buffer = ((unsigned int)(__pa(va) >> 7) << 1) + small;
+
+	__netio_fastio_free_buffer(queue->__user_part.__fastio_index, buffer);
+}
+
+
+/*
+ * Provide a linux buffer for LIPP.
+ */
+static bool tile_net_provide_needed_buffer(struct tile_net_cpu *info,
+					   bool small)
+{
+	/* ISSUE: What should we use here? */
+	unsigned int large_size = NET_IP_ALIGN + TILE_NET_MTU + 100;
+
+	/* Round up to ensure to avoid "false sharing" with last cache line. */
+	unsigned int buffer_size =
+		 (((small ? LIPP_SMALL_PACKET_SIZE : large_size) +
+		   CHIP_L2_LINE_SIZE() - 1) & -CHIP_L2_LINE_SIZE());
+
+	/*
+	 * ISSUE: Since CPAs are 38 bits, and we can only encode the
+	 * high 31 bits in a "linux_buffer_t", the low 7 bits must be
+	 * zero, and thus, we must align the actual "va" mod 128.
+	 */
+	const unsigned long align = 128;
+
+	struct sk_buff *skb;
+	void *va;
+
+	struct sk_buff **skb_ptr;
+
+	/* Note that "dev_alloc_skb()" adds NET_SKB_PAD more bytes, */
+	/* and also "reserves" that many bytes. */
+	/* ISSUE: Can we "share" the NET_SKB_PAD bytes with "skb_ptr"? */
+	int len = sizeof(*skb_ptr) + align + buffer_size;
+
+	while (1) {
+
+		/* Allocate (or fail). */
+		skb = dev_alloc_skb(len);
+		if (skb == NULL)
+			return false;
+
+		/* Make room for a back-pointer to 'skb'. */
+		skb_reserve(skb, sizeof(*skb_ptr));
+
+		/* Make sure we are aligned. */
+		skb_reserve(skb, -(long)skb->data & (align - 1));
+
+		/* This address is given to IPP. */
+		va = skb->data;
+
+		if (small)
+			break;
+
+		/* ISSUE: This has never been observed! */
+		/* Large buffers must not span a huge page. */
+		if (((((long)va & ~HPAGE_MASK) + 1535) & HPAGE_MASK) == 0)
+			break;
+		pr_err("Leaking unaligned linux buffer at %p.\n", va);
+	}
+
+	/* Skip two bytes to satisfy LIPP assumptions. */
+	/* Note that this aligns IP on a 16 byte boundary. */
+	/* ISSUE: Do this when the packet arrives? */
+	skb_reserve(skb, NET_IP_ALIGN);
+
+	/* Save a back-pointer to 'skb'. */
+	skb_ptr = va - sizeof(*skb_ptr);
+	*skb_ptr = skb;
+
+	/* Invalidate the packet buffer. */
+	if (!hash_default)
+		__inv_buffer(skb->data, buffer_size);
+
+	/* Make sure "skb_ptr" has been flushed. */
+	__insn_mf();
+
+#ifdef TILE_NET_PARANOIA
+#if CHIP_HAS_CBOX_HOME_MAP()
+	if (hash_default) {
+		HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)va);
+		if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
+			panic("Non-coherent ingress buffer!");
+	}
+#endif
+#endif
+
+	/* Provide the new buffer. */
+	tile_net_provide_linux_buffer(info, va, small);
+
+	return true;
+}
+
+
+/*
+ * Provide linux buffers for LIPP.
+ */
+static void tile_net_provide_needed_buffers(struct tile_net_cpu *info)
+{
+	while (info->num_needed_small_buffers != 0) {
+		if (!tile_net_provide_needed_buffer(info, true))
+			goto oops;
+		info->num_needed_small_buffers--;
+	}
+
+	while (info->num_needed_large_buffers != 0) {
+		if (!tile_net_provide_needed_buffer(info, false))
+			goto oops;
+		info->num_needed_large_buffers--;
+	}
+
+	return;
+
+oops:
+
+	/* Add a description to the page allocation failure dump. */
+	pr_notice("Could not provide a linux buffer to LIPP.\n");
+}
+
+
+/*
+ * Grab some LEPP completions, and store them in "comps", of size
+ * "comps_size", and return the number of completions which were
+ * stored, so the caller can free them.
+ *
+ * If "pending" is not NULL, it will be set to true if there might
+ * still be some pending completions caused by this tile, else false.
+ */
+static unsigned int tile_net_lepp_grab_comps(struct net_device *dev,
+					     struct sk_buff *comps[],
+					     unsigned int comps_size,
+					     bool *pending)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	lepp_queue_t *eq = priv->epp_queue;
+
+	unsigned int n = 0;
+
+	unsigned int comp_head;
+	unsigned int comp_busy;
+	unsigned int comp_tail;
+
+	spin_lock(&priv->comp_lock);
+
+	comp_head = eq->comp_head;
+	comp_busy = eq->comp_busy;
+	comp_tail = eq->comp_tail;
+
+	while (comp_head != comp_busy && n < comps_size) {
+		comps[n++] = eq->comps[comp_head];
+		LEPP_QINC(comp_head);
+	}
+
+	if (pending != NULL)
+		*pending = (comp_head != comp_tail);
+
+	eq->comp_head = comp_head;
+
+	spin_unlock(&priv->comp_lock);
+
+	return n;
+}
+
+
+/*
+ * Make sure the egress timer is scheduled.
+ *
+ * Note that we use "schedule if not scheduled" logic instead of the more
+ * obvious "reschedule" logic, because "reschedule" is fairly expensive.
+ */
+static void tile_net_schedule_egress_timer(struct tile_net_cpu *info)
+{
+	if (!info->egress_timer_scheduled) {
+		mod_timer_pinned(&info->egress_timer, jiffies + 1);
+		info->egress_timer_scheduled = true;
+	}
+}
+
+
+/*
+ * The "function" for "info->egress_timer".
+ *
+ * This timer will reschedule itself as long as there are any pending
+ * completions expected (on behalf of any tile).
+ *
+ * ISSUE: Realistically, will the timer ever stop scheduling itself?
+ *
+ * ISSUE: This timer is almost never actually needed, so just use a global
+ * timer that can run on any tile.
+ *
+ * ISSUE: Maybe instead track number of expected completions, and free
+ * only that many, resetting to zero if "pending" is ever false.
+ */
+static void tile_net_handle_egress_timer(unsigned long arg)
+{
+	struct tile_net_cpu *info = (struct tile_net_cpu *)arg;
+	struct net_device *dev = info->napi.dev;
+
+	struct sk_buff *olds[32];
+	unsigned int wanted = 32;
+	unsigned int i, nolds = 0;
+	bool pending;
+
+	/* The timer is no longer scheduled. */
+	info->egress_timer_scheduled = false;
+
+	nolds = tile_net_lepp_grab_comps(dev, olds, wanted, &pending);
+
+	for (i = 0; i < nolds; i++)
+		kfree_skb(olds[i]);
+
+	/* Reschedule timer if needed. */
+	if (pending)
+		tile_net_schedule_egress_timer(info);
+}
+
+
+#ifdef IGNORE_DUP_ACKS
+
+/*
+ * Help detect "duplicate" ACKs.  These are sequential packets (for a
+ * given flow) which are exactly 66 bytes long, sharing everything but
+ * ID=2@0x12, Hsum=2@0x18, Ack=4@0x2a, WinSize=2@0x30, Csum=2@0x32,
+ * Tstamps=10@0x38.  The ID's are +1, the Hsum's are -1, the Ack's are
+ * +N, and the Tstamps are usually identical.
+ *
+ * NOTE: Apparently truly duplicate acks (with identical "ack" values),
+ * should not be collapsed, as they are used for some kind of flow control.
+ */
+static bool is_dup_ack(char *s1, char *s2, unsigned int len)
+{
+	int i;
+
+	unsigned long long ignorable = 0;
+
+	/* Identification. */
+	ignorable |= (1ULL << 0x12);
+	ignorable |= (1ULL << 0x13);
+
+	/* Header checksum. */
+	ignorable |= (1ULL << 0x18);
+	ignorable |= (1ULL << 0x19);
+
+	/* ACK. */
+	ignorable |= (1ULL << 0x2a);
+	ignorable |= (1ULL << 0x2b);
+	ignorable |= (1ULL << 0x2c);
+	ignorable |= (1ULL << 0x2d);
+
+	/* WinSize. */
+	ignorable |= (1ULL << 0x30);
+	ignorable |= (1ULL << 0x31);
+
+	/* Checksum. */
+	ignorable |= (1ULL << 0x32);
+	ignorable |= (1ULL << 0x33);
+
+	for (i = 0; i < len; i++, ignorable >>= 1) {
+
+		if ((ignorable & 1) || (s1[i] == s2[i]))
+			continue;
+
+#ifdef TILE_NET_DEBUG
+		/* HACK: Mention non-timestamp diffs. */
+		if (i < 0x38 && i != 0x2f &&
+		    net_ratelimit())
+			pr_info("Diff at 0x%x\n", i);
+#endif
+
+		return false;
+	}
+
+#ifdef TILE_NET_NO_SUPPRESS_DUP_ACKS
+	/* HACK: Do not suppress truly duplicate ACKs. */
+	/* ISSUE: Is this actually necessary or helpful? */
+	if (s1[0x2a] == s2[0x2a] &&
+	    s1[0x2b] == s2[0x2b] &&
+	    s1[0x2c] == s2[0x2c] &&
+	    s1[0x2d] == s2[0x2d]) {
+		return false;
+	}
+#endif
+
+	return true;
+}
+
+#endif
+
+
+
+/*
+ * Like "tile_net_handle_packets()", but just discard packets.
+ */
+static void tile_net_discard_packets(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_netio_queue *queue = &info->queue;
+	netio_queue_impl_t *qsp = queue->__system_part;
+	netio_queue_user_impl_t *qup = &queue->__user_part;
+
+	while (qup->__packet_receive_read !=
+	       qsp->__packet_receive_queue.__packet_write) {
+
+		int index = qup->__packet_receive_read;
+
+		int index2_aux = index + sizeof(netio_pkt_t);
+		int index2 =
+			((index2_aux ==
+			  qsp->__packet_receive_queue.__last_packet_plus_one) ?
+			 0 : index2_aux);
+
+		netio_pkt_t *pkt = (netio_pkt_t *)
+			((unsigned long) &qsp[1] + index);
+
+		/* Extract the "linux_buffer_t". */
+		unsigned int buffer = pkt->__packet.word;
+
+		/* Convert "linux_buffer_t" to "va". */
+		void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+		/* Acquire the associated "skb". */
+		struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+		struct sk_buff *skb = *skb_ptr;
+
+		kfree_skb(skb);
+
+		/* Consume this packet. */
+		qup->__packet_receive_read = index2;
+	}
+}
+
+
+/*
+ * Handle the next packet.  Return true if "processed", false if "filtered".
+ */
+static bool tile_net_poll_aux(struct tile_net_cpu *info, int index)
+{
+	struct net_device *dev = info->napi.dev;
+
+	struct tile_netio_queue *queue = &info->queue;
+	netio_queue_impl_t *qsp = queue->__system_part;
+	netio_queue_user_impl_t *qup = &queue->__user_part;
+	struct tile_net_stats_t *stats = &info->stats;
+
+	int filter;
+
+	int index2_aux = index + sizeof(netio_pkt_t);
+	int index2 =
+		((index2_aux ==
+		  qsp->__packet_receive_queue.__last_packet_plus_one) ?
+		 0 : index2_aux);
+
+	netio_pkt_t *pkt = (netio_pkt_t *)((unsigned long) &qsp[1] + index);
+
+	netio_pkt_metadata_t *metadata = NETIO_PKT_METADATA(pkt);
+
+	/* Extract the packet size. */
+	unsigned long len =
+		(NETIO_PKT_CUSTOM_LENGTH(pkt) +
+		 NET_IP_ALIGN - NETIO_PACKET_PADDING);
+
+	/* Extract the "linux_buffer_t". */
+	unsigned int buffer = pkt->__packet.word;
+
+	/* Extract "small" (vs "large"). */
+	bool small = ((buffer & 1) != 0);
+
+	/* Convert "linux_buffer_t" to "va". */
+	void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+	/* Extract the packet data pointer. */
+	/* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */
+	unsigned char *buf = va + NET_IP_ALIGN;
+
+#ifdef IGNORE_DUP_ACKS
+
+	static int other;
+	static int final;
+	static int keep;
+	static int skip;
+
+#endif
+
+	/* Invalidate the packet buffer. */
+	if (!hash_default)
+		__inv_buffer(buf, len);
+
+	/* ISSUE: Is this needed? */
+	dev->last_rx = jiffies;
+
+#ifdef TILE_NET_DUMP_PACKETS
+	dump_packet(buf, len, "rx");
+#endif /* TILE_NET_DUMP_PACKETS */
+
+#ifdef TILE_NET_VERIFY_INGRESS
+	if (!NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt) &&
+	    NETIO_PKT_L4_CSUM_CALCULATED_M(metadata, pkt)) {
+		/*
+		 * FIXME: This complains about UDP packets
+		 * with a "zero" checksum (bug 6624).
+		 */
+#ifdef TILE_NET_PANIC_ON_BAD
+		dump_packet(buf, len, "rx");
+		panic("Bad L4 checksum.");
+#else
+		pr_warning("Bad L4 checksum on %d byte packet.\n", len);
+#endif
+	}
+	if (!NETIO_PKT_L3_CSUM_CORRECT_M(metadata, pkt) &&
+	    NETIO_PKT_L3_CSUM_CALCULATED_M(metadata, pkt)) {
+		dump_packet(buf, len, "rx");
+		panic("Bad L3 checksum.");
+	}
+	switch (NETIO_PKT_STATUS_M(metadata, pkt)) {
+	case NETIO_PKT_STATUS_OVERSIZE:
+		if (len >= 64) {
+			dump_packet(buf, len, "rx");
+			panic("Unexpected OVERSIZE.");
+		}
+		break;
+	case NETIO_PKT_STATUS_BAD:
+#ifdef TILE_NET_PANIC_ON_BAD
+		dump_packet(buf, len, "rx");
+		panic("Unexpected BAD packet.");
+#else
+		pr_warning("Unexpected BAD %d byte packet.\n", len);
+#endif
+	}
+#endif
+
+	filter = 0;
+
+	if (!(dev->flags & IFF_UP)) {
+		/* Filter packets received before we're up. */
+		filter = 1;
+	} else if (!(dev->flags & IFF_PROMISC)) {
+		/*
+		 * FIXME: Implement HW multicast filter.
+		 */
+		if (!IS_MULTICAST(buf) && !IS_BROADCAST(buf)) {
+			/* Filter packets not for our address. */
+			const u8 *mine = dev->dev_addr;
+			filter = compare_ether_addr(mine, buf);
+		}
+	}
+
+#ifdef IGNORE_DUP_ACKS
+
+	if (len != 66) {
+		/* FIXME: Must check "is_tcp_ack(buf, len)" somehow. */
+
+		other++;
+
+	} else if (index2 ==
+		   qsp->__packet_receive_queue.__packet_write) {
+
+		final++;
+
+	} else {
+
+		netio_pkt_t *pkt2 = (netio_pkt_t *)
+			((unsigned long) &qsp[1] + index2);
+
+		netio_pkt_metadata_t *metadata2 =
+			NETIO_PKT_METADATA(pkt2);
+
+		/* Extract the packet size. */
+		unsigned long len2 =
+			(NETIO_PKT_CUSTOM_LENGTH(pkt2) +
+			 NET_IP_ALIGN - NETIO_PACKET_PADDING);
+
+		if (len2 == 66 &&
+		    NETIO_PKT_FLOW_HASH_M(metadata, pkt) ==
+		    NETIO_PKT_FLOW_HASH_M(metadata2, pkt2)) {
+
+			/* Extract the "linux_buffer_t". */
+			unsigned int buffer2 = pkt2->__packet.word;
+
+			/* Convert "linux_buffer_t" to "va". */
+			void *va2 =
+				__va((phys_addr_t)(buffer2 >> 1) << 7);
+
+			/* Extract the packet data pointer. */
+			/* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */
+			unsigned char *buf2 = va2 + NET_IP_ALIGN;
+
+			/* Invalidate the packet buffer. */
+			if (!hash_default)
+				__inv_buffer(buf2, len2);
+
+			if (is_dup_ack(buf, buf2, len)) {
+				skip++;
+				filter = 1;
+			} else {
+				keep++;
+			}
+		}
+	}
+
+	if (net_ratelimit())
+		pr_info("Other %d Final %d Keep %d Skip %d.\n",
+			other, final, keep, skip);
+
+#endif
+
+	if (filter) {
+
+		/* ISSUE: Update "drop" statistics? */
+
+		tile_net_provide_linux_buffer(info, va, small);
+
+	} else {
+
+		/* Acquire the associated "skb". */
+		struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+		struct sk_buff *skb = *skb_ptr;
+
+		/* Paranoia. */
+		if (skb->data != buf)
+			panic("Corrupt linux buffer from LIPP! "
+			      "VA=%p, skb=%p, skb->data=%p\n",
+			      va, skb, skb->data);
+
+		/* Encode the actual packet length. */
+		skb_put(skb, len);
+
+		/* NOTE: This call also sets "skb->dev = dev". */
+		skb->protocol = eth_type_trans(skb, dev);
+
+		/* ISSUE: Discard corrupt packets? */
+		/* ISSUE: Discard packets with bad checksums? */
+
+		/* Avoid recomputing TCP/UDP checksums. */
+		if (NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt))
+			skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+		netif_receive_skb(skb);
+
+		stats->rx_packets++;
+		stats->rx_bytes += len;
+
+		if (small)
+			info->num_needed_small_buffers++;
+		else
+			info->num_needed_large_buffers++;
+	}
+
+	/* Return four credits after every fourth packet. */
+	if (--qup->__receive_credit_remaining == 0) {
+		u32 interval = qup->__receive_credit_interval;
+		qup->__receive_credit_remaining = interval;
+		__netio_fastio_return_credits(qup->__fastio_index, interval);
+	}
+
+	/* Consume this packet. */
+	qup->__packet_receive_read = index2;
+
+	return !filter;
+}
+
+
+/*
+ * Handle some packets for the given device on the current CPU.
+ *
+ * ISSUE: The "rotting packet" race condition occurs if a packet
+ * arrives after the queue appears to be empty, and before the
+ * hypervisor interrupt is re-enabled.
+ */
+static int tile_net_poll(struct napi_struct *napi, int budget)
+{
+	struct net_device *dev = napi->dev;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_netio_queue *queue = &info->queue;
+	netio_queue_impl_t *qsp = queue->__system_part;
+	netio_queue_user_impl_t *qup = &queue->__user_part;
+
+	unsigned int work = 0;
+
+	while (1) {
+		int index = qup->__packet_receive_read;
+		if (index == qsp->__packet_receive_queue.__packet_write)
+			break;
+
+		if (tile_net_poll_aux(info, index)) {
+			if (++work >= budget)
+				goto done;
+		}
+	}
+
+	napi_complete(&info->napi);
+
+	/* Re-enable hypervisor interrupts. */
+	enable_percpu_irq(priv->intr_id);
+
+	/* HACK: Avoid the "rotting packet" problem. */
+	if (qup->__packet_receive_read !=
+	    qsp->__packet_receive_queue.__packet_write)
+		napi_schedule(&info->napi);
+
+	/* ISSUE: Handle completions? */
+
+done:
+
+	tile_net_provide_needed_buffers(info);
+
+	return work;
+}
+
+
+/*
+ * Handle an ingress interrupt for the given device on the current cpu.
+ */
+static irqreturn_t tile_net_handle_ingress_interrupt(int irq, void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	/* Disable hypervisor interrupt. */
+	disable_percpu_irq(priv->intr_id);
+
+	napi_schedule(&info->napi);
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * One time initialization per interface.
+ */
+static int tile_net_open_aux(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	int ret;
+	int dummy;
+	unsigned int epp_lotar;
+
+	/*
+	 * Find out where EPP memory should be homed.
+	 */
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)&epp_lotar, sizeof(epp_lotar),
+			   NETIO_EPP_SHM_OFF);
+	if (ret < 0) {
+		pr_err("could not read epp_shm_queue lotar.\n");
+		return -EIO;
+	}
+
+	/*
+	 * Home the page on the EPP.
+	 */
+	{
+		int epp_home = hv_lotar_to_cpu(epp_lotar);
+		struct page *page = virt_to_page(priv->epp_queue);
+		homecache_change_page_home(page, 0, epp_home);
+	}
+
+	/*
+	 * Register the EPP shared memory queue.
+	 */
+	{
+		netio_ipp_address_t ea = {
+			.va = 0,
+			.pa = __pa(priv->epp_queue),
+			.pte = hv_pte(0),
+			.size = PAGE_SIZE,
+		};
+		ea.pte = hv_pte_set_lotar(ea.pte, epp_lotar);
+		ea.pte = hv_pte_set_mode(ea.pte, HV_PTE_MODE_CACHE_TILE_L3);
+		ret = hv_dev_pwrite(priv->hv_devhdl, 0,
+				    (HV_VirtAddr)&ea,
+				    sizeof(ea),
+				    NETIO_EPP_SHM_OFF);
+		if (ret < 0)
+			return -EIO;
+	}
+
+	/*
+	 * Start LIPP/LEPP.
+	 */
+	if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+			  sizeof(dummy), NETIO_IPP_START_SHIM_OFF) < 0) {
+		pr_warning("Failed to start LIPP/LEPP.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+
+/*
+ * Register with hypervisor on each CPU.
+ *
+ * Strangely, this function does important things even if it "fails",
+ * which is especially common if the link is not up yet.  Hopefully
+ * these things are all "harmless" if done twice!
+ */
+static void tile_net_register(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info;
+
+	struct tile_netio_queue *queue;
+
+	/* Only network cpus can receive packets. */
+	int queue_id =
+		cpumask_test_cpu(my_cpu, &priv->network_cpus_map) ? 0 : 255;
+
+	netio_input_config_t config = {
+		.flags = 0,
+		.num_receive_packets = priv->network_cpus_credits,
+		.queue_id = queue_id
+	};
+
+	int ret = 0;
+	netio_queue_impl_t *queuep;
+
+	PDEBUG("tile_net_register(queue_id %d)\n", queue_id);
+
+	if (!strcmp(dev->name, "xgbe0"))
+		info = &__get_cpu_var(hv_xgbe0);
+	else if (!strcmp(dev->name, "xgbe1"))
+		info = &__get_cpu_var(hv_xgbe1);
+	else if (!strcmp(dev->name, "gbe0"))
+		info = &__get_cpu_var(hv_gbe0);
+	else if (!strcmp(dev->name, "gbe1"))
+		info = &__get_cpu_var(hv_gbe1);
+	else
+		BUG();
+
+	/* Initialize the egress timer. */
+	init_timer(&info->egress_timer);
+	info->egress_timer.data = (long)info;
+	info->egress_timer.function = tile_net_handle_egress_timer;
+
+	priv->cpu[my_cpu] = info;
+
+	/*
+	 * Register ourselves with the IPP.
+	 */
+	ret = hv_dev_pwrite(priv->hv_devhdl, 0,
+			    (HV_VirtAddr)&config,
+			    sizeof(netio_input_config_t),
+			    NETIO_IPP_INPUT_REGISTER_OFF);
+	PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n",
+	       ret);
+	if (ret < 0) {
+		printk(KERN_DEBUG "hv_dev_pwrite NETIO_IPP_INPUT_REGISTER_OFF"
+		       " failure %d\n", ret);
+		info->link_down = (ret == NETIO_LINK_DOWN);
+		return;
+	}
+
+	/*
+	 * Get the pointer to our queue's system part.
+	 */
+
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)&queuep,
+			   sizeof(netio_queue_impl_t *),
+			   NETIO_IPP_INPUT_REGISTER_OFF);
+	PDEBUG("hv_dev_pread(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n",
+	       ret);
+	PDEBUG("queuep %p\n", queuep);
+	if (ret <= 0) {
+		/* ISSUE: Shouldn't this be a fatal error? */
+		pr_err("hv_dev_pread NETIO_IPP_INPUT_REGISTER_OFF failure\n");
+		return;
+	}
+
+	queue = &info->queue;
+
+	queue->__system_part = queuep;
+
+	memset(&queue->__user_part, 0, sizeof(netio_queue_user_impl_t));
+
+	/* This is traditionally "config.num_receive_packets / 2". */
+	queue->__user_part.__receive_credit_interval = 4;
+	queue->__user_part.__receive_credit_remaining =
+		queue->__user_part.__receive_credit_interval;
+
+	/*
+	 * Get a fastio index from the hypervisor.
+	 * ISSUE: Shouldn't this check the result?
+	 */
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)&queue->__user_part.__fastio_index,
+			   sizeof(queue->__user_part.__fastio_index),
+			   NETIO_IPP_GET_FASTIO_OFF);
+	PDEBUG("hv_dev_pread(NETIO_IPP_GET_FASTIO_OFF) returned %d\n", ret);
+
+	netif_napi_add(dev, &info->napi, tile_net_poll, 64);
+
+	/* Now we are registered. */
+	info->registered = true;
+}
+
+
+/*
+ * Unregister with hypervisor on each CPU.
+ */
+static void tile_net_unregister(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	int ret = 0;
+	int dummy = 0;
+
+	/* Do nothing if never registered. */
+	if (info == NULL)
+		return;
+
+	/* Do nothing if already unregistered. */
+	if (!info->registered)
+		return;
+
+	/*
+	 * Unregister ourselves with LIPP.
+	 */
+	ret = hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+			    sizeof(dummy), NETIO_IPP_INPUT_UNREGISTER_OFF);
+	PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_UNREGISTER_OFF) returned %d\n",
+	       ret);
+	if (ret < 0) {
+		/* FIXME: Just panic? */
+		pr_err("hv_dev_pwrite NETIO_IPP_INPUT_UNREGISTER_OFF"
+		       " failure %d\n", ret);
+	}
+
+	/*
+	 * Discard all packets still in our NetIO queue.  Hopefully,
+	 * once the unregister call is complete, there will be no
+	 * packets still in flight on the IDN.
+	 */
+	tile_net_discard_packets(dev);
+
+	/* Reset state. */
+	info->num_needed_small_buffers = 0;
+	info->num_needed_large_buffers = 0;
+
+	/* Cancel egress timer. */
+	del_timer(&info->egress_timer);
+	info->egress_timer_scheduled = false;
+
+	netif_napi_del(&info->napi);
+
+	/* Now we are unregistered. */
+	info->registered = false;
+}
+
+
+/*
+ * Helper function for "tile_net_stop()".
+ *
+ * Also used to handle registration failure in "tile_net_open_inner()",
+ * when "fully_opened" is known to be false, and the various extra
+ * steps in "tile_net_stop()" are not necessary.  ISSUE: It might be
+ * simpler if we could just call "tile_net_stop()" anyway.
+ */
+static void tile_net_stop_aux(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	int dummy = 0;
+
+	/* Unregister all tiles, so LIPP will stop delivering packets. */
+	on_each_cpu(tile_net_unregister, (void *)dev, 1);
+
+	/* Stop LIPP/LEPP. */
+	if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+			  sizeof(dummy), NETIO_IPP_STOP_SHIM_OFF) < 0)
+		panic("Failed to stop LIPP/LEPP!\n");
+
+	priv->partly_opened = 0;
+}
+
+
+/*
+ * Disable ingress interrupts for the given device on the current cpu.
+ */
+static void tile_net_disable_intr(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	/* Disable hypervisor interrupt. */
+	disable_percpu_irq(priv->intr_id);
+
+	/* Disable NAPI if needed. */
+	if (info != NULL && info->napi_enabled) {
+		napi_disable(&info->napi);
+		info->napi_enabled = false;
+	}
+}
+
+
+/*
+ * Enable ingress interrupts for the given device on the current cpu.
+ */
+static void tile_net_enable_intr(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	/* Enable hypervisor interrupt. */
+	enable_percpu_irq(priv->intr_id);
+
+	/* Enable NAPI. */
+	napi_enable(&info->napi);
+	info->napi_enabled = true;
+}
+
+
+/*
+ * tile_net_open_inner does most of the work of bringing up the interface.
+ * It's called from tile_net_open(), and also from tile_net_retry_open().
+ * The return value is 0 if the interface was brought up, < 0 if
+ * tile_net_open() should return the return value as an error, and > 0 if
+ * tile_net_open() should return success and schedule a work item to
+ * periodically retry the bringup.
+ */
+static int tile_net_open_inner(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info;
+	struct tile_netio_queue *queue;
+	unsigned int irq;
+	int i;
+
+	/*
+	 * First try to register just on the local CPU, and handle any
+	 * semi-expected "link down" failure specially.  Note that we
+	 * do NOT call "tile_net_stop_aux()", unlike below.
+	 */
+	tile_net_register(dev);
+	info = priv->cpu[my_cpu];
+	if (!info->registered) {
+		if (info->link_down)
+			return 1;
+		return -EAGAIN;
+	}
+
+	/*
+	 * Now register everywhere else.  If any registration fails,
+	 * even for "link down" (which might not be possible), we
+	 * clean up using "tile_net_stop_aux()".
+	 */
+	smp_call_function(tile_net_register, (void *)dev, 1);
+	for_each_online_cpu(i) {
+		if (!priv->cpu[i]->registered) {
+			tile_net_stop_aux(dev);
+			return -EAGAIN;
+		}
+	}
+
+	queue = &info->queue;
+
+	/*
+	 * Set the device intr bit mask.
+	 * The tile_net_register above sets per tile __intr_id.
+	 */
+	priv->intr_id = queue->__system_part->__intr_id;
+	BUG_ON(!priv->intr_id);
+
+	/*
+	 * Register the device interrupt handler.
+	 * The __ffs() function returns the index into the interrupt handler
+	 * table from the interrupt bit mask which should have one bit
+	 * and one bit only set.
+	 */
+	irq = __ffs(priv->intr_id);
+	tile_irq_activate(irq, TILE_IRQ_PERCPU);
+	BUG_ON(request_irq(irq, tile_net_handle_ingress_interrupt,
+			   0, dev->name, (void *)dev) != 0);
+
+	/* ISSUE: How could "priv->fully_opened" ever be "true" here? */
+
+	if (!priv->fully_opened) {
+
+		int dummy = 0;
+
+		/* Allocate initial buffers. */
+
+		int max_buffers =
+			priv->network_cpus_count * priv->network_cpus_credits;
+
+		info->num_needed_small_buffers =
+			min(LIPP_SMALL_BUFFERS, max_buffers);
+
+		info->num_needed_large_buffers =
+			min(LIPP_LARGE_BUFFERS, max_buffers);
+
+		tile_net_provide_needed_buffers(info);
+
+		if (info->num_needed_small_buffers != 0 ||
+		    info->num_needed_large_buffers != 0)
+			panic("Insufficient memory for buffer stack!");
+
+		/* Start LIPP/LEPP and activate "ingress" at the shim. */
+		if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+				  sizeof(dummy), NETIO_IPP_INPUT_INIT_OFF) < 0)
+			panic("Failed to activate the LIPP Shim!\n");
+
+		priv->fully_opened = 1;
+	}
+
+	/* On each tile, enable the hypervisor to trigger interrupts. */
+	/* ISSUE: Do this before starting LIPP/LEPP? */
+	on_each_cpu(tile_net_enable_intr, (void *)dev, 1);
+
+	/* Start our transmit queue. */
+	netif_start_queue(dev);
+
+	return 0;
+}
+
+
+/*
+ * Called periodically to retry bringing up the NetIO interface,
+ * if it doesn't come up cleanly during tile_net_open().
+ */
+static void tile_net_open_retry(struct work_struct *w)
+{
+	struct delayed_work *dw =
+		container_of(w, struct delayed_work, work);
+
+	struct tile_net_priv *priv =
+		container_of(dw, struct tile_net_priv, retry_work);
+
+	/*
+	 * Try to bring the NetIO interface up.  If it fails, reschedule
+	 * ourselves to try again later; otherwise, tell Linux we now have
+	 * a working link.  ISSUE: What if the return value is negative?
+	 */
+	if (tile_net_open_inner(priv->dev))
+		schedule_delayed_work_on(singlethread_cpu, &priv->retry_work,
+					 TILE_NET_RETRY_INTERVAL);
+	else
+		netif_carrier_on(priv->dev);
+}
+
+
+/*
+ * Called when a network interface is made active.
+ *
+ * Returns 0 on success, negative value on failure.
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP).  At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ *
+ * If the actual link is not available yet, then we tell Linux that
+ * we have no carrier, and we keep checking until the link comes up.
+ */
+static int tile_net_open(struct net_device *dev)
+{
+	int ret = 0;
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	/*
+	 * We rely on priv->partly_opened to tell us if this is the
+	 * first time this interface is being brought up. If it is
+	 * set, the IPP was already initialized and should not be
+	 * initialized again.
+	 */
+	if (!priv->partly_opened) {
+
+		int count;
+		int credits;
+
+		/* Initialize LIPP/LEPP, and start the Shim. */
+		ret = tile_net_open_aux(dev);
+		if (ret < 0) {
+			pr_err("tile_net_open_aux failed: %d\n", ret);
+			return ret;
+		}
+
+		/* Analyze the network cpus. */
+
+		if (network_cpus_used)
+			cpumask_copy(&priv->network_cpus_map,
+				     &network_cpus_map);
+		else
+			cpumask_copy(&priv->network_cpus_map, cpu_online_mask);
+
+
+		count = cpumask_weight(&priv->network_cpus_map);
+
+		/* Limit credits to available buffers, and apply min. */
+		credits = max(16, (LIPP_LARGE_BUFFERS / count) & ~1);
+
+		/* Apply "GBE" max limit. */
+		/* ISSUE: Use higher limit for XGBE? */
+		credits = min(NETIO_MAX_RECEIVE_PKTS, credits);
+
+		priv->network_cpus_count = count;
+		priv->network_cpus_credits = credits;
+
+#ifdef TILE_NET_DEBUG
+		pr_info("Using %d network cpus, with %d credits each\n",
+		       priv->network_cpus_count, priv->network_cpus_credits);
+#endif
+
+		priv->partly_opened = 1;
+	}
+
+	/*
+	 * Attempt to bring up the link.
+	 */
+	ret = tile_net_open_inner(dev);
+	if (ret <= 0) {
+		if (ret == 0)
+			netif_carrier_on(dev);
+		return ret;
+	}
+
+	/*
+	 * We were unable to bring up the NetIO interface, but we want to
+	 * try again in a little bit.  Tell Linux that we have no carrier
+	 * so it doesn't try to use the interface before the link comes up
+	 * and then remember to try again later.
+	 */
+	netif_carrier_off(dev);
+	schedule_delayed_work_on(singlethread_cpu, &priv->retry_work,
+				 TILE_NET_RETRY_INTERVAL);
+
+	return 0;
+}
+
+
+/*
+ * Disables a network interface.
+ *
+ * Returns 0, this is not allowed to fail.
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the drivers control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ *
+ * ISSUE: Can this can be called while "tile_net_poll()" is running?
+ */
+static int tile_net_stop(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	bool pending = true;
+
+	PDEBUG("tile_net_stop()\n");
+
+	/* ISSUE: Only needed if not yet fully open. */
+	cancel_delayed_work_sync(&priv->retry_work);
+
+	/* Can't transmit any more. */
+	netif_stop_queue(dev);
+
+	/*
+	 * Disable hypervisor interrupts on each tile.
+	 */
+	on_each_cpu(tile_net_disable_intr, (void *)dev, 1);
+
+	/*
+	 * Unregister the interrupt handler.
+	 * The __ffs() function returns the index into the interrupt handler
+	 * table from the interrupt bit mask which should have one bit
+	 * and one bit only set.
+	 */
+	if (priv->intr_id)
+		free_irq(__ffs(priv->intr_id), dev);
+
+	/*
+	 * Drain all the LIPP buffers.
+	 */
+
+	while (true) {
+		int buffer;
+
+		/* NOTE: This should never fail. */
+		if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&buffer,
+				 sizeof(buffer), NETIO_IPP_DRAIN_OFF) < 0)
+			break;
+
+		/* Stop when done. */
+		if (buffer == 0)
+			break;
+
+		{
+			/* Convert "linux_buffer_t" to "va". */
+			void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+			/* Acquire the associated "skb". */
+			struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+			struct sk_buff *skb = *skb_ptr;
+
+			kfree_skb(skb);
+		}
+	}
+
+	/* Stop LIPP/LEPP. */
+	tile_net_stop_aux(dev);
+
+
+	priv->fully_opened = 0;
+
+
+	/*
+	 * XXX: ISSUE: It appears that, in practice anyway, by the
+	 * time we get here, there are no pending completions.
+	 */
+	while (pending) {
+
+		struct sk_buff *olds[32];
+		unsigned int wanted = 32;
+		unsigned int i, nolds = 0;
+
+		nolds = tile_net_lepp_grab_comps(dev, olds,
+						 wanted, &pending);
+
+		/* ISSUE: We have never actually seen this debug spew. */
+		if (nolds != 0)
+			pr_info("During tile_net_stop(), grabbed %d comps.\n",
+			       nolds);
+
+		for (i = 0; i < nolds; i++)
+			kfree_skb(olds[i]);
+	}
+
+
+	/* Wipe the EPP queue. */
+	memset(priv->epp_queue, 0, sizeof(lepp_queue_t));
+
+	/* Evict the EPP queue. */
+	finv_buffer(priv->epp_queue, PAGE_SIZE);
+
+	return 0;
+}
+
+
+/*
+ * Prepare the "frags" info for the resulting LEPP command.
+ *
+ * If needed, flush the memory used by the frags.
+ */
+static unsigned int tile_net_tx_frags(lepp_frag_t *frags,
+				      struct sk_buff *skb,
+				      void *b_data, unsigned int b_len)
+{
+	unsigned int i, n = 0;
+
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	phys_addr_t cpa;
+
+	if (b_len != 0) {
+
+		if (!hash_default)
+			finv_buffer_remote(b_data, b_len);
+
+		cpa = __pa(b_data);
+		frags[n].cpa_lo = cpa;
+		frags[n].cpa_hi = cpa >> 32;
+		frags[n].length = b_len;
+		frags[n].hash_for_home = hash_default;
+		n++;
+	}
+
+	for (i = 0; i < sh->nr_frags; i++) {
+
+		skb_frag_t *f = &sh->frags[i];
+		unsigned long pfn = page_to_pfn(f->page);
+
+		/* FIXME: Compute "hash_for_home" properly. */
+		/* ISSUE: The hypervisor checks CHIP_HAS_REV1_DMA_PACKETS(). */
+		int hash_for_home = hash_default;
+
+		/* FIXME: Hmmm. */
+		if (!hash_default) {
+			void *va = pfn_to_kaddr(pfn) + f->page_offset;
+			BUG_ON(PageHighMem(f->page));
+			finv_buffer_remote(va, f->size);
+		}
+
+		cpa = ((phys_addr_t)pfn << PAGE_SHIFT) + f->page_offset;
+		frags[n].cpa_lo = cpa;
+		frags[n].cpa_hi = cpa >> 32;
+		frags[n].length = f->size;
+		frags[n].hash_for_home = hash_for_home;
+		n++;
+	}
+
+	return n;
+}
+
+
+/*
+ * This function takes "skb", consisting of a header template and a
+ * payload, and hands it to LEPP, to emit as one or more segments,
+ * each consisting of a possibly modified header, plus a piece of the
+ * payload, via a process known as "tcp segmentation offload".
+ *
+ * Usually, "data" will contain the header template, of size "sh_len",
+ * and "sh->frags" will contain "skb->data_len" bytes of payload, and
+ * there will be "sh->gso_segs" segments.
+ *
+ * Sometimes, if "sendfile()" requires copying, we will be called with
+ * "data" containing the header and payload, with "frags" being empty.
+ *
+ * In theory, "sh->nr_frags" could be 3, but in practice, it seems
+ * that this will never actually happen.
+ *
+ * See "emulate_large_send_offload()" for some reference code, which
+ * does not handle checksumming.
+ *
+ * ISSUE: How do we make sure that high memory DMA does not migrate?
+ */
+static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_net_stats_t *stats = &info->stats;
+
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	unsigned char *data = skb->data;
+
+	/* The ip header follows the ethernet header. */
+	struct iphdr *ih = ip_hdr(skb);
+	unsigned int ih_len = ih->ihl * 4;
+
+	/* Note that "nh == ih", by definition. */
+	unsigned char *nh = skb_network_header(skb);
+	unsigned int eh_len = nh - data;
+
+	/* The tcp header follows the ip header. */
+	struct tcphdr *th = (struct tcphdr *)(nh + ih_len);
+	unsigned int th_len = th->doff * 4;
+
+	/* The total number of header bytes. */
+	/* NOTE: This may be less than skb_headlen(skb). */
+	unsigned int sh_len = eh_len + ih_len + th_len;
+
+	/* The number of payload bytes at "skb->data + sh_len". */
+	/* This is non-zero for sendfile() without HIGHDMA. */
+	unsigned int b_len = skb_headlen(skb) - sh_len;
+
+	/* The total number of payload bytes. */
+	unsigned int d_len = b_len + skb->data_len;
+
+	/* The maximum payload size. */
+	unsigned int p_len = sh->gso_size;
+
+	/* The total number of segments. */
+	unsigned int num_segs = sh->gso_segs;
+
+	/* The temporary copy of the command. */
+	u32 cmd_body[(LEPP_MAX_CMD_SIZE + 3) / 4];
+	lepp_tso_cmd_t *cmd = (lepp_tso_cmd_t *)cmd_body;
+
+	/* Analyze the "frags". */
+	unsigned int num_frags =
+		tile_net_tx_frags(cmd->frags, skb, data + sh_len, b_len);
+
+	/* The size of the command, including frags and header. */
+	size_t cmd_size = LEPP_TSO_CMD_SIZE(num_frags, sh_len);
+
+	/* The command header. */
+	lepp_tso_cmd_t cmd_init = {
+		.tso = true,
+		.header_size = sh_len,
+		.ip_offset = eh_len,
+		.tcp_offset = eh_len + ih_len,
+		.payload_size = p_len,
+		.num_frags = num_frags,
+	};
+
+	unsigned long irqflags;
+
+	lepp_queue_t *eq = priv->epp_queue;
+
+	struct sk_buff *olds[4];
+	unsigned int wanted = 4;
+	unsigned int i, nolds = 0;
+
+	unsigned int cmd_head, cmd_tail, cmd_next;
+	unsigned int comp_tail;
+
+	unsigned int free_slots;
+
+
+	/* Paranoia. */
+	BUG_ON(skb->protocol != htons(ETH_P_IP));
+	BUG_ON(ih->protocol != IPPROTO_TCP);
+	BUG_ON(skb->ip_summed != CHECKSUM_PARTIAL);
+	BUG_ON(num_frags > LEPP_MAX_FRAGS);
+	/*--BUG_ON(num_segs != (d_len + (p_len - 1)) / p_len); */
+	BUG_ON(num_segs <= 1);
+
+
+	/* Finish preparing the command. */
+
+	/* Copy the command header. */
+	*cmd = cmd_init;
+
+	/* Copy the "header". */
+	memcpy(&cmd->frags[num_frags], data, sh_len);
+
+
+	/* Prefetch and wait, to minimize time spent holding the spinlock. */
+	prefetch_L1(&eq->comp_tail);
+	prefetch_L1(&eq->cmd_tail);
+	mb();
+
+
+	/* Enqueue the command. */
+
+	spin_lock_irqsave(&priv->cmd_lock, irqflags);
+
+	/*
+	 * Handle completions if needed to make room.
+	 * HACK: Spin until there is sufficient room.
+	 */
+	free_slots = lepp_num_free_comp_slots(eq);
+	if (free_slots < 1) {
+spin:
+		nolds += tile_net_lepp_grab_comps(dev, olds + nolds,
+						  wanted - nolds, NULL);
+		if (lepp_num_free_comp_slots(eq) < 1)
+			goto spin;
+	}
+
+	cmd_head = eq->cmd_head;
+	cmd_tail = eq->cmd_tail;
+
+	/* NOTE: The "gotos" below are untested. */
+
+	/* Prepare to advance, detecting full queue. */
+	cmd_next = cmd_tail + cmd_size;
+	if (cmd_tail < cmd_head && cmd_next >= cmd_head)
+		goto spin;
+	if (cmd_next > LEPP_CMD_LIMIT) {
+		cmd_next = 0;
+		if (cmd_next == cmd_head)
+			goto spin;
+	}
+
+	/* Copy the command. */
+	memcpy(&eq->cmds[cmd_tail], cmd, cmd_size);
+
+	/* Advance. */
+	cmd_tail = cmd_next;
+
+	/* Record "skb" for eventual freeing. */
+	comp_tail = eq->comp_tail;
+	eq->comps[comp_tail] = skb;
+	LEPP_QINC(comp_tail);
+	eq->comp_tail = comp_tail;
+
+	/* Flush before allowing LEPP to handle the command. */
+	__insn_mf();
+
+	eq->cmd_tail = cmd_tail;
+
+	spin_unlock_irqrestore(&priv->cmd_lock, irqflags);
+
+	if (nolds == 0)
+		nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL);
+
+	/* Handle completions. */
+	for (i = 0; i < nolds; i++)
+		kfree_skb(olds[i]);
+
+	/* Update stats. */
+	stats->tx_packets += num_segs;
+	stats->tx_bytes += (num_segs * sh_len) + d_len;
+
+	/* Make sure the egress timer is scheduled. */
+	tile_net_schedule_egress_timer(info);
+
+	return NETDEV_TX_OK;
+}
+
+
+/*
+ * Transmit a packet (called by the kernel via "hard_start_xmit" hook).
+ */
+static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+	struct tile_net_stats_t *stats = &info->stats;
+
+	unsigned long irqflags;
+
+	struct skb_shared_info *sh = skb_shinfo(skb);
+
+	unsigned int len = skb->len;
+	unsigned char *data = skb->data;
+
+	unsigned int csum_start = skb->csum_start - skb_headroom(skb);
+
+	lepp_frag_t frags[LEPP_MAX_FRAGS];
+
+	unsigned int num_frags;
+
+	lepp_queue_t *eq = priv->epp_queue;
+
+	struct sk_buff *olds[4];
+	unsigned int wanted = 4;
+	unsigned int i, nolds = 0;
+
+	unsigned int cmd_size = sizeof(lepp_cmd_t);
+
+	unsigned int cmd_head, cmd_tail, cmd_next;
+	unsigned int comp_tail;
+
+	lepp_cmd_t cmds[LEPP_MAX_FRAGS];
+
+	unsigned int free_slots;
+
+
+	/*
+	 * This is paranoia, since we think that if the link doesn't come
+	 * up, telling Linux we have no carrier will keep it from trying
+	 * to transmit.  If it does, though, we can't execute this routine,
+	 * since data structures we depend on aren't set up yet.
+	 */
+	if (!info->registered)
+		return NETDEV_TX_BUSY;
+
+
+	/* Save the timestamp. */
+	dev->trans_start = jiffies;
+
+
+#ifdef TILE_NET_PARANOIA
+#if CHIP_HAS_CBOX_HOME_MAP()
+	if (hash_default) {
+		HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)data);
+		if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
+			panic("Non-coherent egress buffer!");
+	}
+#endif
+#endif
+
+
+#ifdef TILE_NET_DUMP_PACKETS
+	/* ISSUE: Does not dump the "frags". */
+	dump_packet(data, skb_headlen(skb), "tx");
+#endif /* TILE_NET_DUMP_PACKETS */
+
+
+	if (sh->gso_size != 0)
+		return tile_net_tx_tso(skb, dev);
+
+
+	/* Prepare the commands. */
+
+	num_frags = tile_net_tx_frags(frags, skb, data, skb_headlen(skb));
+
+	for (i = 0; i < num_frags; i++) {
+
+		bool final = (i == num_frags - 1);
+
+		lepp_cmd_t cmd = {
+			.cpa_lo = frags[i].cpa_lo,
+			.cpa_hi = frags[i].cpa_hi,
+			.length = frags[i].length,
+			.hash_for_home = frags[i].hash_for_home,
+			.send_completion = final,
+			.end_of_packet = final
+		};
+
+		if (i == 0 && skb->ip_summed == CHECKSUM_PARTIAL) {
+			cmd.compute_checksum = 1;
+			cmd.checksum_data.bits.start_byte = csum_start;
+			cmd.checksum_data.bits.count = len - csum_start;
+			cmd.checksum_data.bits.destination_byte =
+				csum_start + skb->csum_offset;
+		}
+
+		cmds[i] = cmd;
+	}
+
+
+	/* Prefetch and wait, to minimize time spent holding the spinlock. */
+	prefetch_L1(&eq->comp_tail);
+	prefetch_L1(&eq->cmd_tail);
+	mb();
+
+
+	/* Enqueue the commands. */
+
+	spin_lock_irqsave(&priv->cmd_lock, irqflags);
+
+	/*
+	 * Handle completions if needed to make room.
+	 * HACK: Spin until there is sufficient room.
+	 */
+	free_slots = lepp_num_free_comp_slots(eq);
+	if (free_slots < 1) {
+spin:
+		nolds += tile_net_lepp_grab_comps(dev, olds + nolds,
+						  wanted - nolds, NULL);
+		if (lepp_num_free_comp_slots(eq) < 1)
+			goto spin;
+	}
+
+	cmd_head = eq->cmd_head;
+	cmd_tail = eq->cmd_tail;
+
+	/* NOTE: The "gotos" below are untested. */
+
+	/* Copy the commands, or fail. */
+	for (i = 0; i < num_frags; i++) {
+
+		/* Prepare to advance, detecting full queue. */
+		cmd_next = cmd_tail + cmd_size;
+		if (cmd_tail < cmd_head && cmd_next >= cmd_head)
+			goto spin;
+		if (cmd_next > LEPP_CMD_LIMIT) {
+			cmd_next = 0;
+			if (cmd_next == cmd_head)
+				goto spin;
+		}
+
+		/* Copy the command. */
+		*(lepp_cmd_t *)&eq->cmds[cmd_tail] = cmds[i];
+
+		/* Advance. */
+		cmd_tail = cmd_next;
+	}
+
+	/* Record "skb" for eventual freeing. */
+	comp_tail = eq->comp_tail;
+	eq->comps[comp_tail] = skb;
+	LEPP_QINC(comp_tail);
+	eq->comp_tail = comp_tail;
+
+	/* Flush before allowing LEPP to handle the command. */
+	__insn_mf();
+
+	eq->cmd_tail = cmd_tail;
+
+	spin_unlock_irqrestore(&priv->cmd_lock, irqflags);
+
+	if (nolds == 0)
+		nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL);
+
+	/* Handle completions. */
+	for (i = 0; i < nolds; i++)
+		kfree_skb(olds[i]);
+
+	/* HACK: Track "expanded" size for short packets (e.g. 42 < 60). */
+	stats->tx_packets++;
+	stats->tx_bytes += ((len >= ETH_ZLEN) ? len : ETH_ZLEN);
+
+	/* Make sure the egress timer is scheduled. */
+	tile_net_schedule_egress_timer(info);
+
+	return NETDEV_TX_OK;
+}
+
+
+/*
+ * Deal with a transmit timeout.
+ */
+static void tile_net_tx_timeout(struct net_device *dev)
+{
+	PDEBUG("tile_net_tx_timeout()\n");
+	PDEBUG("Transmit timeout at %ld, latency %ld\n", jiffies,
+	       jiffies - dev->trans_start);
+
+	/* XXX: ISSUE: This doesn't seem useful for us. */
+	netif_wake_queue(dev);
+}
+
+
+/*
+ * Ioctl commands.
+ */
+static int tile_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	return -EOPNOTSUPP;
+}
+
+
+/*
+ * Get System Network Statistics.
+ *
+ * Returns the address of the device statistics structure.
+ */
+static struct net_device_stats *tile_net_get_stats(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+	u32 rx_packets = 0;
+	u32 tx_packets = 0;
+	u32 rx_bytes = 0;
+	u32 tx_bytes = 0;
+	int i;
+
+	for_each_online_cpu(i) {
+		if (priv->cpu[i]) {
+			rx_packets += priv->cpu[i]->stats.rx_packets;
+			rx_bytes += priv->cpu[i]->stats.rx_bytes;
+			tx_packets += priv->cpu[i]->stats.tx_packets;
+			tx_bytes += priv->cpu[i]->stats.tx_bytes;
+		}
+	}
+
+	priv->stats.rx_packets = rx_packets;
+	priv->stats.rx_bytes = rx_bytes;
+	priv->stats.tx_packets = tx_packets;
+	priv->stats.tx_bytes = tx_bytes;
+
+	return &priv->stats;
+}
+
+
+/*
+ * Change the "mtu".
+ *
+ * The "change_mtu" method is usually not needed.
+ * If you need it, it must be like this.
+ */
+static int tile_net_change_mtu(struct net_device *dev, int new_mtu)
+{
+	PDEBUG("tile_net_change_mtu()\n");
+
+	/* Check ranges. */
+	if ((new_mtu < 68) || (new_mtu > 1500))
+		return -EINVAL;
+
+	/* Accept the value. */
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
+
+/*
+ * Change the Ethernet Address of the NIC.
+ *
+ * The hypervisor driver does not support changing MAC address.  However,
+ * the IPP does not do anything with the MAC address, so the address which
+ * gets used on outgoing packets, and which is accepted on incoming packets,
+ * is completely up to the NetIO program or kernel driver which is actually
+ * handling them.
+ *
+ * Returns 0 on success, negative on failure.
+ */
+static int tile_net_set_mac_address(struct net_device *dev, void *p)
+{
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	/* ISSUE: Note that "dev_addr" is now a pointer. */
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+	return 0;
+}
+
+
+/*
+ * Obtain the MAC address from the hypervisor.
+ * This must be done before opening the device.
+ */
+static int tile_net_get_mac(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	char hv_dev_name[32];
+	int len;
+
+	__netio_getset_offset_t offset = { .word = NETIO_IPP_PARAM_OFF };
+
+	int ret;
+
+	/* For example, "xgbe0". */
+	strcpy(hv_dev_name, dev->name);
+	len = strlen(hv_dev_name);
+
+	/* For example, "xgbe/0". */
+	hv_dev_name[len] = hv_dev_name[len - 1];
+	hv_dev_name[len - 1] = '/';
+	len++;
+
+	/* For example, "xgbe/0/native_hash". */
+	strcpy(hv_dev_name + len, hash_default ? "/native_hash" : "/native");
+
+	/* Get the hypervisor handle for this device. */
+	priv->hv_devhdl = hv_dev_open((HV_VirtAddr)hv_dev_name, 0);
+	PDEBUG("hv_dev_open(%s) returned %d %p\n",
+	       hv_dev_name, priv->hv_devhdl, &priv->hv_devhdl);
+	if (priv->hv_devhdl < 0) {
+		if (priv->hv_devhdl == HV_ENODEV)
+			printk(KERN_DEBUG "Ignoring unconfigured device %s\n",
+				 hv_dev_name);
+		else
+			printk(KERN_DEBUG "hv_dev_open(%s) returned %d\n",
+				 hv_dev_name, priv->hv_devhdl);
+		return -1;
+	}
+
+	/*
+	 * Read the hardware address from the hypervisor.
+	 * ISSUE: Note that "dev_addr" is now a pointer.
+	 */
+	offset.bits.class = NETIO_PARAM;
+	offset.bits.addr = NETIO_PARAM_MAC;
+	ret = hv_dev_pread(priv->hv_devhdl, 0,
+			   (HV_VirtAddr)dev->dev_addr, dev->addr_len,
+			   offset.word);
+	PDEBUG("hv_dev_pread(NETIO_PARAM_MAC) returned %d\n", ret);
+	if (ret <= 0) {
+		printk(KERN_DEBUG "hv_dev_pread(NETIO_PARAM_MAC) %s failed\n",
+		       dev->name);
+		/*
+		 * Since the device is configured by the hypervisor but we
+		 * can't get its MAC address, we are most likely running
+		 * the simulator, so let's generate a random MAC address.
+		 */
+		random_ether_addr(dev->dev_addr);
+	}
+
+	return 0;
+}
+
+
+static struct net_device_ops tile_net_ops = {
+	.ndo_open = tile_net_open,
+	.ndo_stop = tile_net_stop,
+	.ndo_start_xmit = tile_net_tx,
+	.ndo_do_ioctl = tile_net_ioctl,
+	.ndo_get_stats = tile_net_get_stats,
+	.ndo_change_mtu = tile_net_change_mtu,
+	.ndo_tx_timeout = tile_net_tx_timeout,
+	.ndo_set_mac_address = tile_net_set_mac_address
+};
+
+
+/*
+ * The setup function.
+ *
+ * This uses ether_setup() to assign various fields in dev, including
+ * setting IFF_BROADCAST and IFF_MULTICAST, then sets some extra fields.
+ */
+static void tile_net_setup(struct net_device *dev)
+{
+	PDEBUG("tile_net_setup()\n");
+
+	ether_setup(dev);
+
+	dev->netdev_ops = &tile_net_ops;
+
+	dev->watchdog_timeo = TILE_NET_TIMEOUT;
+
+	/* We want lockless xmit. */
+	dev->features |= NETIF_F_LLTX;
+
+	/* We support hardware tx checksums. */
+	dev->features |= NETIF_F_HW_CSUM;
+
+	/* We support scatter/gather. */
+	dev->features |= NETIF_F_SG;
+
+	/* We support TSO. */
+	dev->features |= NETIF_F_TSO;
+
+#ifdef TILE_NET_GSO
+	/* We support GSO. */
+	dev->features |= NETIF_F_GSO;
+#endif
+
+	if (hash_default)
+		dev->features |= NETIF_F_HIGHDMA;
+
+	/* ISSUE: We should support NETIF_F_UFO. */
+
+	dev->tx_queue_len = TILE_NET_TX_QUEUE_LEN;
+
+	dev->mtu = TILE_NET_MTU;
+}
+
+
+/*
+ * Allocate the device structure, register the device, and obtain the
+ * MAC address from the hypervisor.
+ */
+static struct net_device *tile_net_dev_init(const char *name)
+{
+	int ret;
+	struct net_device *dev;
+	struct tile_net_priv *priv;
+	struct page *page;
+
+	/*
+	 * Allocate the device structure.  This allocates "priv", calls
+	 * tile_net_setup(), and saves "name".  Normally, "name" is a
+	 * template, instantiated by register_netdev(), but not for us.
+	 */
+	dev = alloc_netdev(sizeof(*priv), name, tile_net_setup);
+	if (!dev) {
+		pr_err("alloc_netdev(%s) failed\n", name);
+		return NULL;
+	}
+
+	priv = netdev_priv(dev);
+
+	/* Initialize "priv". */
+
+	memset(priv, 0, sizeof(*priv));
+
+	/* Save "dev" for "tile_net_open_retry()". */
+	priv->dev = dev;
+
+	INIT_DELAYED_WORK(&priv->retry_work, tile_net_open_retry);
+
+	spin_lock_init(&priv->cmd_lock);
+	spin_lock_init(&priv->comp_lock);
+
+	/* Allocate "epp_queue". */
+	BUG_ON(get_order(sizeof(lepp_queue_t)) != 0);
+	page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0);
+	if (!page) {
+		free_netdev(dev);
+		return NULL;
+	}
+	priv->epp_queue = page_address(page);
+
+	/* Register the network device. */
+	ret = register_netdev(dev);
+	if (ret) {
+		pr_err("register_netdev %s failed %d\n", dev->name, ret);
+		free_page((unsigned long)priv->epp_queue);
+		free_netdev(dev);
+		return NULL;
+	}
+
+	/* Get the MAC address. */
+	ret = tile_net_get_mac(dev);
+	if (ret < 0) {
+		unregister_netdev(dev);
+		free_page((unsigned long)priv->epp_queue);
+		free_netdev(dev);
+		return NULL;
+	}
+
+	return dev;
+}
+
+
+/*
+ * Module cleanup.
+ */
+static void tile_net_cleanup(void)
+{
+	int i;
+
+	for (i = 0; i < TILE_NET_DEVS; i++) {
+		if (tile_net_devs[i]) {
+			struct net_device *dev = tile_net_devs[i];
+			struct tile_net_priv *priv = netdev_priv(dev);
+			unregister_netdev(dev);
+			finv_buffer(priv->epp_queue, PAGE_SIZE);
+			free_page((unsigned long)priv->epp_queue);
+			free_netdev(dev);
+		}
+	}
+}
+
+
+/*
+ * Module initialization.
+ */
+static int tile_net_init_module(void)
+{
+	pr_info("Tilera IPP Net Driver\n");
+
+	tile_net_devs[0] = tile_net_dev_init("xgbe0");
+	tile_net_devs[1] = tile_net_dev_init("xgbe1");
+	tile_net_devs[2] = tile_net_dev_init("gbe0");
+	tile_net_devs[3] = tile_net_dev_init("gbe1");
+
+	return 0;
+}
+
+
+#ifndef MODULE
+/*
+ * The "network_cpus" boot argument specifies the cpus that are dedicated
+ * to handle ingress packets.
+ *
+ * The parameter should be in the form "network_cpus=m-n[,x-y]", where
+ * m, n, x, y are integer numbers that represent the cpus that can be
+ * neither a dedicated cpu nor a dataplane cpu.
+ */
+static int __init network_cpus_setup(char *str)
+{
+	int rc = cpulist_parse_crop(str, &network_cpus_map);
+	if (rc != 0) {
+		pr_warning("network_cpus=%s: malformed cpu list\n",
+		       str);
+	} else {
+
+		/* Remove dedicated cpus. */
+		cpumask_and(&network_cpus_map, &network_cpus_map,
+			    cpu_possible_mask);
+
+
+		if (cpumask_empty(&network_cpus_map)) {
+			pr_warning("Ignoring network_cpus='%s'.\n",
+			       str);
+		} else {
+			char buf[1024];
+			cpulist_scnprintf(buf, sizeof(buf), &network_cpus_map);
+			pr_info("Linux network CPUs: %s\n", buf);
+			network_cpus_used = true;
+		}
+	}
+
+	return 0;
+}
+__setup("network_cpus=", network_cpus_setup);
+#endif
+
+
+module_init(tile_net_init_module);
+module_exit(tile_net_cleanup);
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 91e6c78271a..4786497de03 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -657,8 +657,9 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr)
 #ifndef PCMCIA
 	/* finish figuring the shared RAM address */
 	if (cardpresent == TR_ISA) {
-		static __u32 ram_bndry_mask[] =
-			{ 0xffffe000, 0xffffc000, 0xffff8000, 0xffff0000 };
+		static const __u32 ram_bndry_mask[] = {
+			0xffffe000, 0xffffc000, 0xffff8000, 0xffff0000
+		};
 		__u32 new_base, rrr_32, chk_base, rbm;
 
 		rrr_32=readb(ti->mmio+ACA_OFFSET+ACA_RW+RRR_ODD) >> 2 & 0x03;
diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c
index c78a50586c1..b13c6b040be 100644
--- a/drivers/net/tulip/de2104x.c
+++ b/drivers/net/tulip/de2104x.c
@@ -964,7 +964,7 @@ static void de_set_media (struct de_private *de)
 		dw32(MacMode, macmode);
 }
 
-static void de_next_media (struct de_private *de, u32 *media,
+static void de_next_media (struct de_private *de, const u32 *media,
 			   unsigned int n_media)
 {
 	unsigned int i;
@@ -1008,10 +1008,10 @@ static void de21040_media_timer (unsigned long data)
 		return;
 
 	if (de->media_type == DE_MEDIA_AUI) {
-		u32 next_state = DE_MEDIA_TP;
+		static const u32 next_state = DE_MEDIA_TP;
 		de_next_media(de, &next_state, 1);
 	} else {
-		u32 next_state = DE_MEDIA_AUI;
+		static const u32 next_state = DE_MEDIA_AUI;
 		de_next_media(de, &next_state, 1);
 	}
 
@@ -1136,13 +1136,19 @@ static void de21041_media_timer (unsigned long data)
 	 * simply resets the PHY and reloads the current media settings.
 	 */
 	if (de->media_type == DE_MEDIA_AUI) {
-		u32 next_states[] = { DE_MEDIA_BNC, DE_MEDIA_TP_AUTO };
+		static const u32 next_states[] = {
+			DE_MEDIA_BNC, DE_MEDIA_TP_AUTO
+		};
 		de_next_media(de, next_states, ARRAY_SIZE(next_states));
 	} else if (de->media_type == DE_MEDIA_BNC) {
-		u32 next_states[] = { DE_MEDIA_TP_AUTO, DE_MEDIA_AUI };
+		static const u32 next_states[] = {
+			DE_MEDIA_TP_AUTO, DE_MEDIA_AUI
+		};
 		de_next_media(de, next_states, ARRAY_SIZE(next_states));
 	} else {
-		u32 next_states[] = { DE_MEDIA_AUI, DE_MEDIA_BNC, DE_MEDIA_TP_AUTO };
+		static const u32 next_states[] = {
+			DE_MEDIA_AUI, DE_MEDIA_BNC, DE_MEDIA_TP_AUTO
+		};
 		de_next_media(de, next_states, ARRAY_SIZE(next_states));
 	}
 
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index a9f7d5d1a26..7064e035757 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -688,9 +688,6 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
 
 	DMFE_DBUG(0, "dmfe_start_xmit", 0);
 
-	/* Resource flag check */
-	netif_stop_queue(dev);
-
 	/* Too large packet check */
 	if (skb->len > MAX_PACKET_SIZE) {
 		pr_err("big packet = %d\n", (u16)skb->len);
@@ -698,6 +695,9 @@ static netdev_tx_t dmfe_start_xmit(struct sk_buff *skb,
 		return NETDEV_TX_OK;
 	}
 
+	/* Resource flag check */
+	netif_stop_queue(dev);
+
 	spin_lock_irqsave(&db->lock, flags);
 
 	/* No Tx resource check, it never happen nromally */
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index 2c39f259121..5c01e260f1b 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1302,17 +1302,18 @@ static const struct net_device_ops tulip_netdev_ops = {
 #endif
 };
 
+DEFINE_PCI_DEVICE_TABLE(early_486_chipsets) = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
+	{ },
+};
+
 static int __devinit tulip_init_one (struct pci_dev *pdev,
 				     const struct pci_device_id *ent)
 {
 	struct tulip_private *tp;
 	/* See note below on the multiport cards. */
 	static unsigned char last_phys_addr[6] = {0x00, 'L', 'i', 'n', 'u', 'x'};
-	static struct pci_device_id early_486_chipsets[] = {
-		{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
-		{ PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
-		{ },
-	};
 	static int last_irq;
 	static int multiport_cnt;	/* For four-port boards w/one EEPROM */
 	int i, irq;
@@ -1682,7 +1683,9 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 		tp->full_duplex_lock = 1;
 
 	if (tulip_media_cap[tp->default_port] & MediaIsMII) {
-		u16 media2advert[] = { 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200 };
+		static const u16 media2advert[] = {
+			0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200
+		};
 		tp->mii_advertise = media2advert[tp->default_port - 9];
 		tp->mii_advertise |= (tp->flags & HAS_8023X); /* Matching bits! */
 	}
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 55f3a3e667a..7599c457abd 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -757,7 +757,7 @@ static __inline__ ssize_t tun_put_user(struct tun_struct *tun,
 
 		if (skb->ip_summed == CHECKSUM_PARTIAL) {
 			gso.flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
-			gso.csum_start = skb->csum_start - skb_headroom(skb);
+			gso.csum_start = skb_checksum_start_offset(skb);
 			gso.csum_offset = skb->csum_offset;
 		} /* else everything is zero */
 
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 5b83c3f35f4..a3c46f6a15e 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -1004,7 +1004,6 @@ typhoon_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
 	}
 
 	strcpy(info->driver, KBUILD_MODNAME);
-	strcpy(info->version, UTS_RELEASE);
 	strcpy(info->bus_info, pci_name(pci_dev));
 }
 
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index a4c3f570824..acbdab3d66c 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2050,12 +2050,16 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
 
 	ugeth_vdbg("%s: IN", __func__);
 
+	/*
+	 * Tell the kernel the link is down.
+	 * Must be done before disabling the controller
+	 * or deadlock may happen.
+	 */
+	phy_stop(phydev);
+
 	/* Disable the controller */
 	ugeth_disable(ugeth, COMM_DIR_RX_AND_TX);
 
-	/* Tell the kernel the link is down */
-	phy_stop(phydev);
-
 	/* Mask all interrupts */
 	out_be32(ugeth->uccf->p_uccm, 0x00000000);
 
@@ -2065,9 +2069,6 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
 	/* Disable Rx and Tx */
 	clrbits32(&ug_regs->maccfg1, MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX);
 
-	phy_disconnect(ugeth->phydev);
-	ugeth->phydev = NULL;
-
 	ucc_geth_memclean(ugeth);
 }
 
@@ -3550,7 +3551,10 @@ static int ucc_geth_close(struct net_device *dev)
 
 	napi_disable(&ugeth->napi);
 
+	cancel_work_sync(&ugeth->timeout_work);
 	ucc_geth_stop(ugeth);
+	phy_disconnect(ugeth->phydev);
+	ugeth->phydev = NULL;
 
 	free_irq(ugeth->ug_info->uf_info.irq, ugeth->ndev);
 
@@ -3579,8 +3583,12 @@ static void ucc_geth_timeout_work(struct work_struct *work)
 		 * Must reset MAC *and* PHY. This is done by reopening
 		 * the device.
 		 */
-		ucc_geth_close(dev);
-		ucc_geth_open(dev);
+		netif_tx_stop_all_queues(dev);
+		ucc_geth_stop(ugeth);
+		ucc_geth_init_mac(ugeth);
+		/* Must start PHY here */
+		phy_start(ugeth->phydev);
+		netif_tx_start_all_queues(dev);
 	}
 
 	netif_tx_schedule_all(dev);
@@ -3594,7 +3602,6 @@ static void ucc_geth_timeout(struct net_device *dev)
 {
 	struct ucc_geth_private *ugeth = netdev_priv(dev);
 
-	netif_carrier_off(dev);
 	schedule_work(&ugeth->timeout_work);
 }
 
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 05a95586f3c..055b87ab4f0 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -899,7 +899,8 @@ struct ucc_geth_hardware_statistics {
 #define UCC_GETH_UTFS_INIT                      512	/* Tx virtual FIFO size
 							 */
 #define UCC_GETH_UTFET_INIT                     256	/* 1/2 utfs */
-#define UCC_GETH_UTFTT_INIT                     512
+#define UCC_GETH_UTFTT_INIT                     256	/* 1/2 utfs
+							   due to errata */
 /* Gigabit Ethernet (1000 Mbps) */
 #define UCC_GETH_URFS_GIGA_INIT                 4096/*2048*/	/* Rx virtual
 								   FIFO size */
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 52ffabe6db0..6f600cced6e 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -196,6 +196,25 @@ config USB_NET_CDC_EEM
 	  IEEE 802 "local assignment" bit is set in the address, a "usbX"
 	  name is used instead.
 
+config USB_NET_CDC_NCM
+	tristate "CDC NCM support"
+	depends on USB_USBNET
+	default y
+	help
+	  This driver provides support for CDC NCM (Network Control Model
+	  Device USB Class Specification). The CDC NCM specification is
+	  available from <http://www.usb.org/>.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module.
+
+	  This driver should work with at least the following devices:
+	    * ST-Ericsson M700 LTE FDD/TDD Mobile Broadband Modem (ref. design)
+	    * ST-Ericsson M5730 HSPA+ Mobile Broadband Modem (reference design)
+	    * ST-Ericsson M570 HSPA+ Mobile Broadband Modem (reference design)
+	    * ST-Ericsson M343 HSPA Mobile Broadband Modem (reference design)
+	    * Ericsson F5521gw Mobile Broadband Module
+
 config USB_NET_DM9601
 	tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
 	depends on USB_USBNET
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index a19b0259ae1..cac17030118 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -26,4 +26,5 @@ obj-$(CONFIG_USB_CDC_PHONET)	+= cdc-phonet.o
 obj-$(CONFIG_USB_IPHETH)	+= ipheth.o
 obj-$(CONFIG_USB_SIERRA_NET)	+= sierra_net.o
 obj-$(CONFIG_USB_NET_CX82310_ETH)	+= cx82310_eth.o
+obj-$(CONFIG_USB_NET_CDC_NCM)	+= cdc_ncm.o
 
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index aea4645be7f..6140b56cce5 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1508,6 +1508,10 @@ static const struct usb_device_id	products [] = {
 	USB_DEVICE (0x0b95, 0x1780),
 	.driver_info = (unsigned long) &ax88178_info,
 }, {
+	// Logitec LAN-GTJ/U2A
+	USB_DEVICE (0x0789, 0x0160),
+	.driver_info = (unsigned long) &ax88178_info,
+}, {
 	// Linksys USB200M Rev 2
 	USB_DEVICE (0x13b1, 0x0018),
 	.driver_info = (unsigned long) &ax88772_info,
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index b3fe0de4046..9a60e415d76 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -99,9 +99,7 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
 		 */
 		buf = dev->udev->actconfig->extra;
 		len = dev->udev->actconfig->extralen;
-		if (len)
-			dev_dbg(&intf->dev,
-				"CDC descriptors on config\n");
+		dev_dbg(&intf->dev, "CDC descriptors on config\n");
 	}
 
 	/* Maybe CDC descriptors are after the endpoint?  This bug has
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
new file mode 100644
index 00000000000..593c104ab19
--- /dev/null
+++ b/drivers/net/usb/cdc_ncm.c
@@ -0,0 +1,1213 @@
+/*
+ * cdc_ncm.c
+ *
+ * Copyright (C) ST-Ericsson 2010
+ * Contact: Alexey Orishko <alexey.orishko@stericsson.com>
+ * Original author: Hans Petter Selasky <hans.petter.selasky@stericsson.com>
+ *
+ * USB Host Driver for Network Control Model (NCM)
+ * http://www.usb.org/developers/devclass_docs/NCM10.zip
+ *
+ * The NCM encoding, decoding and initialization logic
+ * derives from FreeBSD 8.x. if_cdce.c and if_cdcereg.h
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose this file to be licensed under the terms
+ * of the GNU General Public License (GPL) Version 2 or the 2-clause
+ * BSD license listed below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/usb.h>
+#include <linux/version.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/atomic.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/cdc.h>
+
+#define	DRIVER_VERSION				"30-Nov-2010"
+
+/* CDC NCM subclass 3.2.1 */
+#define USB_CDC_NCM_NDP16_LENGTH_MIN		0x10
+
+/* Maximum NTB length */
+#define	CDC_NCM_NTB_MAX_SIZE_TX			16384	/* bytes */
+#define	CDC_NCM_NTB_MAX_SIZE_RX			16384	/* bytes */
+
+/* Minimum value for MaxDatagramSize, ch. 6.2.9 */
+#define	CDC_NCM_MIN_DATAGRAM_SIZE		1514	/* bytes */
+
+#define	CDC_NCM_MIN_TX_PKT			512	/* bytes */
+
+/* Default value for MaxDatagramSize */
+#define	CDC_NCM_MAX_DATAGRAM_SIZE		2048	/* bytes */
+
+/*
+ * Maximum amount of datagrams in NCM Datagram Pointer Table, not counting
+ * the last NULL entry. Any additional datagrams in NTB would be discarded.
+ */
+#define	CDC_NCM_DPT_DATAGRAMS_MAX		32
+
+/* Restart the timer, if amount of datagrams is less than given value */
+#define	CDC_NCM_RESTART_TIMER_DATAGRAM_CNT	3
+
+/* The following macro defines the minimum header space */
+#define	CDC_NCM_MIN_HDR_SIZE \
+	(sizeof(struct usb_cdc_ncm_nth16) + sizeof(struct usb_cdc_ncm_ndp16) + \
+	(CDC_NCM_DPT_DATAGRAMS_MAX + 1) * sizeof(struct usb_cdc_ncm_dpe16))
+
+struct connection_speed_change {
+	__le32	USBitRate; /* holds 3GPP downlink value, bits per second */
+	__le32	DSBitRate; /* holds 3GPP uplink value, bits per second */
+} __attribute__ ((packed));
+
+struct cdc_ncm_data {
+	struct usb_cdc_ncm_nth16 nth16;
+	struct usb_cdc_ncm_ndp16 ndp16;
+	struct usb_cdc_ncm_dpe16 dpe16[CDC_NCM_DPT_DATAGRAMS_MAX + 1];
+};
+
+struct cdc_ncm_ctx {
+	struct cdc_ncm_data rx_ncm;
+	struct cdc_ncm_data tx_ncm;
+	struct usb_cdc_ncm_ntb_parameters ncm_parm;
+	struct timer_list tx_timer;
+
+	const struct usb_cdc_ncm_desc *func_desc;
+	const struct usb_cdc_header_desc *header_desc;
+	const struct usb_cdc_union_desc *union_desc;
+	const struct usb_cdc_ether_desc *ether_desc;
+
+	struct net_device *netdev;
+	struct usb_device *udev;
+	struct usb_host_endpoint *in_ep;
+	struct usb_host_endpoint *out_ep;
+	struct usb_host_endpoint *status_ep;
+	struct usb_interface *intf;
+	struct usb_interface *control;
+	struct usb_interface *data;
+
+	struct sk_buff *tx_curr_skb;
+	struct sk_buff *tx_rem_skb;
+
+	spinlock_t mtx;
+
+	u32 tx_timer_pending;
+	u32 tx_curr_offset;
+	u32 tx_curr_last_offset;
+	u32 tx_curr_frame_num;
+	u32 rx_speed;
+	u32 tx_speed;
+	u32 rx_max;
+	u32 tx_max;
+	u32 max_datagram_size;
+	u16 tx_max_datagrams;
+	u16 tx_remainder;
+	u16 tx_modulus;
+	u16 tx_ndp_modulus;
+	u16 tx_seq;
+	u16 connected;
+	u8 data_claimed;
+	u8 control_claimed;
+};
+
+static void cdc_ncm_tx_timeout(unsigned long arg);
+static const struct driver_info cdc_ncm_info;
+static struct usb_driver cdc_ncm_driver;
+static struct ethtool_ops cdc_ncm_ethtool_ops;
+
+static const struct usb_device_id cdc_devs[] = {
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM,
+		USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+		.driver_info = (unsigned long)&cdc_ncm_info,
+	},
+	{
+	},
+};
+
+MODULE_DEVICE_TABLE(usb, cdc_devs);
+
+static void
+cdc_ncm_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
+{
+	struct usbnet *dev = netdev_priv(net);
+
+	strncpy(info->driver, dev->driver_name, sizeof(info->driver));
+	strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
+	strncpy(info->fw_version, dev->driver_info->description,
+		sizeof(info->fw_version));
+	usb_make_path(dev->udev, info->bus_info, sizeof(info->bus_info));
+}
+
+static int
+cdc_ncm_do_request(struct cdc_ncm_ctx *ctx, struct usb_cdc_notification *req,
+		   void *data, u16 flags, u16 *actlen, u16 timeout)
+{
+	int err;
+
+	err = usb_control_msg(ctx->udev, (req->bmRequestType & USB_DIR_IN) ?
+				usb_rcvctrlpipe(ctx->udev, 0) :
+				usb_sndctrlpipe(ctx->udev, 0),
+				req->bNotificationType, req->bmRequestType,
+				req->wValue,
+				req->wIndex, data,
+				req->wLength, timeout);
+
+	if (err < 0) {
+		if (actlen)
+			*actlen = 0;
+		return err;
+	}
+
+	if (actlen)
+		*actlen = err;
+
+	return 0;
+}
+
+static u8 cdc_ncm_setup(struct cdc_ncm_ctx *ctx)
+{
+	struct usb_cdc_notification req;
+	u32 val;
+	__le16 max_datagram_size;
+	u8 flags;
+	u8 iface_no;
+	int err;
+
+	iface_no = ctx->control->cur_altsetting->desc.bInterfaceNumber;
+
+	req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE;
+	req.bNotificationType = USB_CDC_GET_NTB_PARAMETERS;
+	req.wValue = 0;
+	req.wIndex = cpu_to_le16(iface_no);
+	req.wLength = cpu_to_le16(sizeof(ctx->ncm_parm));
+
+	err = cdc_ncm_do_request(ctx, &req, &ctx->ncm_parm, 0, NULL, 1000);
+	if (err) {
+		pr_debug("failed GET_NTB_PARAMETERS\n");
+		return 1;
+	}
+
+	/* read correct set of parameters according to device mode */
+	ctx->rx_max = le32_to_cpu(ctx->ncm_parm.dwNtbInMaxSize);
+	ctx->tx_max = le32_to_cpu(ctx->ncm_parm.dwNtbOutMaxSize);
+	ctx->tx_remainder = le16_to_cpu(ctx->ncm_parm.wNdpOutPayloadRemainder);
+	ctx->tx_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutDivisor);
+	ctx->tx_ndp_modulus = le16_to_cpu(ctx->ncm_parm.wNdpOutAlignment);
+
+	if (ctx->func_desc != NULL)
+		flags = ctx->func_desc->bmNetworkCapabilities;
+	else
+		flags = 0;
+
+	pr_debug("dwNtbInMaxSize=%u dwNtbOutMaxSize=%u "
+		 "wNdpOutPayloadRemainder=%u wNdpOutDivisor=%u "
+		 "wNdpOutAlignment=%u flags=0x%x\n",
+		 ctx->rx_max, ctx->tx_max, ctx->tx_remainder, ctx->tx_modulus,
+		 ctx->tx_ndp_modulus, flags);
+
+	/* max count of tx datagrams without terminating NULL entry */
+	ctx->tx_max_datagrams = CDC_NCM_DPT_DATAGRAMS_MAX;
+
+	/* verify maximum size of received NTB in bytes */
+	if ((ctx->rx_max <
+	    (CDC_NCM_MIN_HDR_SIZE + CDC_NCM_MIN_DATAGRAM_SIZE)) ||
+	    (ctx->rx_max > CDC_NCM_NTB_MAX_SIZE_RX)) {
+		pr_debug("Using default maximum receive length=%d\n",
+						CDC_NCM_NTB_MAX_SIZE_RX);
+		ctx->rx_max = CDC_NCM_NTB_MAX_SIZE_RX;
+	}
+
+	/* verify maximum size of transmitted NTB in bytes */
+	if ((ctx->tx_max <
+	    (CDC_NCM_MIN_HDR_SIZE + CDC_NCM_MIN_DATAGRAM_SIZE)) ||
+	    (ctx->tx_max > CDC_NCM_NTB_MAX_SIZE_TX)) {
+		pr_debug("Using default maximum transmit length=%d\n",
+						CDC_NCM_NTB_MAX_SIZE_TX);
+		ctx->tx_max = CDC_NCM_NTB_MAX_SIZE_TX;
+	}
+
+	/*
+	 * verify that the structure alignment is:
+	 * - power of two
+	 * - not greater than the maximum transmit length
+	 * - not less than four bytes
+	 */
+	val = ctx->tx_ndp_modulus;
+
+	if ((val < USB_CDC_NCM_NDP_ALIGN_MIN_SIZE) ||
+	    (val != ((-val) & val)) || (val >= ctx->tx_max)) {
+		pr_debug("Using default alignment: 4 bytes\n");
+		ctx->tx_ndp_modulus = USB_CDC_NCM_NDP_ALIGN_MIN_SIZE;
+	}
+
+	/*
+	 * verify that the payload alignment is:
+	 * - power of two
+	 * - not greater than the maximum transmit length
+	 * - not less than four bytes
+	 */
+	val = ctx->tx_modulus;
+
+	if ((val < USB_CDC_NCM_NDP_ALIGN_MIN_SIZE) ||
+	    (val != ((-val) & val)) || (val >= ctx->tx_max)) {
+		pr_debug("Using default transmit modulus: 4 bytes\n");
+		ctx->tx_modulus = USB_CDC_NCM_NDP_ALIGN_MIN_SIZE;
+	}
+
+	/* verify the payload remainder */
+	if (ctx->tx_remainder >= ctx->tx_modulus) {
+		pr_debug("Using default transmit remainder: 0 bytes\n");
+		ctx->tx_remainder = 0;
+	}
+
+	/* adjust TX-remainder according to NCM specification. */
+	ctx->tx_remainder = ((ctx->tx_remainder - ETH_HLEN) &
+						(ctx->tx_modulus - 1));
+
+	/* additional configuration */
+
+	/* set CRC Mode */
+	req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE;
+	req.bNotificationType = USB_CDC_SET_CRC_MODE;
+	req.wValue = cpu_to_le16(USB_CDC_NCM_CRC_NOT_APPENDED);
+	req.wIndex = cpu_to_le16(iface_no);
+	req.wLength = 0;
+
+	err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000);
+	if (err)
+		pr_debug("Setting CRC mode off failed\n");
+
+	/* set NTB format */
+	req.bmRequestType = USB_TYPE_CLASS | USB_DIR_OUT | USB_RECIP_INTERFACE;
+	req.bNotificationType = USB_CDC_SET_NTB_FORMAT;
+	req.wValue = cpu_to_le16(USB_CDC_NCM_NTB16_FORMAT);
+	req.wIndex = cpu_to_le16(iface_no);
+	req.wLength = 0;
+
+	err = cdc_ncm_do_request(ctx, &req, NULL, 0, NULL, 1000);
+	if (err)
+		pr_debug("Setting NTB format to 16-bit failed\n");
+
+	/* set Max Datagram Size (MTU) */
+	req.bmRequestType = USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE;
+	req.bNotificationType = USB_CDC_GET_MAX_DATAGRAM_SIZE;
+	req.wValue = 0;
+	req.wIndex = cpu_to_le16(iface_no);
+	req.wLength = cpu_to_le16(2);
+
+	err = cdc_ncm_do_request(ctx, &req, &max_datagram_size, 0, NULL, 1000);
+	if (err) {
+		pr_debug(" GET_MAX_DATAGRAM_SIZE failed, using size=%u\n",
+			 CDC_NCM_MIN_DATAGRAM_SIZE);
+		/* use default */
+		ctx->max_datagram_size = CDC_NCM_MIN_DATAGRAM_SIZE;
+	} else {
+		ctx->max_datagram_size = le16_to_cpu(max_datagram_size);
+
+		if (ctx->max_datagram_size < CDC_NCM_MIN_DATAGRAM_SIZE)
+			ctx->max_datagram_size = CDC_NCM_MIN_DATAGRAM_SIZE;
+		else if (ctx->max_datagram_size > CDC_NCM_MAX_DATAGRAM_SIZE)
+			ctx->max_datagram_size = CDC_NCM_MAX_DATAGRAM_SIZE;
+	}
+
+	if (ctx->netdev->mtu != (ctx->max_datagram_size - ETH_HLEN))
+		ctx->netdev->mtu = ctx->max_datagram_size - ETH_HLEN;
+
+	return 0;
+}
+
+static void
+cdc_ncm_find_endpoints(struct cdc_ncm_ctx *ctx, struct usb_interface *intf)
+{
+	struct usb_host_endpoint *e;
+	u8 ep;
+
+	for (ep = 0; ep < intf->cur_altsetting->desc.bNumEndpoints; ep++) {
+
+		e = intf->cur_altsetting->endpoint + ep;
+		switch (e->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+		case USB_ENDPOINT_XFER_INT:
+			if (usb_endpoint_dir_in(&e->desc)) {
+				if (ctx->status_ep == NULL)
+					ctx->status_ep = e;
+			}
+			break;
+
+		case USB_ENDPOINT_XFER_BULK:
+			if (usb_endpoint_dir_in(&e->desc)) {
+				if (ctx->in_ep == NULL)
+					ctx->in_ep = e;
+			} else {
+				if (ctx->out_ep == NULL)
+					ctx->out_ep = e;
+			}
+			break;
+
+		default:
+			break;
+		}
+	}
+}
+
+static void cdc_ncm_free(struct cdc_ncm_ctx *ctx)
+{
+	if (ctx == NULL)
+		return;
+
+	del_timer_sync(&ctx->tx_timer);
+
+	if (ctx->data_claimed) {
+		usb_set_intfdata(ctx->data, NULL);
+		usb_driver_release_interface(driver_of(ctx->intf), ctx->data);
+	}
+
+	if (ctx->control_claimed) {
+		usb_set_intfdata(ctx->control, NULL);
+		usb_driver_release_interface(driver_of(ctx->intf),
+								ctx->control);
+	}
+
+	if (ctx->tx_rem_skb != NULL) {
+		dev_kfree_skb_any(ctx->tx_rem_skb);
+		ctx->tx_rem_skb = NULL;
+	}
+
+	if (ctx->tx_curr_skb != NULL) {
+		dev_kfree_skb_any(ctx->tx_curr_skb);
+		ctx->tx_curr_skb = NULL;
+	}
+
+	kfree(ctx);
+}
+
+static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct cdc_ncm_ctx *ctx;
+	struct usb_driver *driver;
+	u8 *buf;
+	int len;
+	int temp;
+	u8 iface_no;
+
+	ctx = kmalloc(sizeof(*ctx), GFP_KERNEL);
+	if (ctx == NULL)
+		goto error;
+
+	memset(ctx, 0, sizeof(*ctx));
+
+	init_timer(&ctx->tx_timer);
+	spin_lock_init(&ctx->mtx);
+	ctx->netdev = dev->net;
+
+	/* store ctx pointer in device data field */
+	dev->data[0] = (unsigned long)ctx;
+
+	/* get some pointers */
+	driver = driver_of(intf);
+	buf = intf->cur_altsetting->extra;
+	len = intf->cur_altsetting->extralen;
+
+	ctx->udev = dev->udev;
+	ctx->intf = intf;
+
+	/* parse through descriptors associated with control interface */
+	while ((len > 0) && (buf[0] > 2) && (buf[0] <= len)) {
+
+		if (buf[1] != USB_DT_CS_INTERFACE)
+			goto advance;
+
+		switch (buf[2]) {
+		case USB_CDC_UNION_TYPE:
+			if (buf[0] < sizeof(*(ctx->union_desc)))
+				break;
+
+			ctx->union_desc =
+					(const struct usb_cdc_union_desc *)buf;
+
+			ctx->control = usb_ifnum_to_if(dev->udev,
+					ctx->union_desc->bMasterInterface0);
+			ctx->data = usb_ifnum_to_if(dev->udev,
+					ctx->union_desc->bSlaveInterface0);
+			break;
+
+		case USB_CDC_ETHERNET_TYPE:
+			if (buf[0] < sizeof(*(ctx->ether_desc)))
+				break;
+
+			ctx->ether_desc =
+					(const struct usb_cdc_ether_desc *)buf;
+
+			dev->hard_mtu =
+				le16_to_cpu(ctx->ether_desc->wMaxSegmentSize);
+
+			if (dev->hard_mtu <
+			    (CDC_NCM_MIN_DATAGRAM_SIZE - ETH_HLEN))
+				dev->hard_mtu =
+					CDC_NCM_MIN_DATAGRAM_SIZE - ETH_HLEN;
+
+			else if (dev->hard_mtu >
+				 (CDC_NCM_MAX_DATAGRAM_SIZE - ETH_HLEN))
+				dev->hard_mtu =
+					CDC_NCM_MAX_DATAGRAM_SIZE - ETH_HLEN;
+			break;
+
+		case USB_CDC_NCM_TYPE:
+			if (buf[0] < sizeof(*(ctx->func_desc)))
+				break;
+
+			ctx->func_desc = (const struct usb_cdc_ncm_desc *)buf;
+			break;
+
+		default:
+			break;
+		}
+advance:
+		/* advance to next descriptor */
+		temp = buf[0];
+		buf += temp;
+		len -= temp;
+	}
+
+	/* check if we got everything */
+	if ((ctx->control == NULL) || (ctx->data == NULL) ||
+	    (ctx->ether_desc == NULL))
+		goto error;
+
+	/* claim interfaces, if any */
+	if (ctx->data != intf) {
+		temp = usb_driver_claim_interface(driver, ctx->data, dev);
+		if (temp)
+			goto error;
+		ctx->data_claimed = 1;
+	}
+
+	if (ctx->control != intf) {
+		temp = usb_driver_claim_interface(driver, ctx->control, dev);
+		if (temp)
+			goto error;
+		ctx->control_claimed = 1;
+	}
+
+	iface_no = ctx->data->cur_altsetting->desc.bInterfaceNumber;
+
+	/* reset data interface */
+	temp = usb_set_interface(dev->udev, iface_no, 0);
+	if (temp)
+		goto error;
+
+	/* initialize data interface */
+	if (cdc_ncm_setup(ctx))
+		goto error;
+
+	/* configure data interface */
+	temp = usb_set_interface(dev->udev, iface_no, 1);
+	if (temp)
+		goto error;
+
+	cdc_ncm_find_endpoints(ctx, ctx->data);
+	cdc_ncm_find_endpoints(ctx, ctx->control);
+
+	if ((ctx->in_ep == NULL) || (ctx->out_ep == NULL) ||
+	    (ctx->status_ep == NULL))
+		goto error;
+
+	dev->net->ethtool_ops = &cdc_ncm_ethtool_ops;
+
+	usb_set_intfdata(ctx->data, dev);
+	usb_set_intfdata(ctx->control, dev);
+	usb_set_intfdata(ctx->intf, dev);
+
+	temp = usbnet_get_ethernet_addr(dev, ctx->ether_desc->iMACAddress);
+	if (temp)
+		goto error;
+
+	dev_info(&dev->udev->dev, "MAC-Address: "
+				"0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n",
+				dev->net->dev_addr[0], dev->net->dev_addr[1],
+				dev->net->dev_addr[2], dev->net->dev_addr[3],
+				dev->net->dev_addr[4], dev->net->dev_addr[5]);
+
+	dev->in = usb_rcvbulkpipe(dev->udev,
+		ctx->in_ep->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+	dev->out = usb_sndbulkpipe(dev->udev,
+		ctx->out_ep->desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+	dev->status = ctx->status_ep;
+	dev->rx_urb_size = ctx->rx_max;
+
+	/*
+	 * We should get an event when network connection is "connected" or
+	 * "disconnected". Set network connection in "disconnected" state
+	 * (carrier is OFF) during attach, so the IP network stack does not
+	 * start IPv6 negotiation and more.
+	 */
+	netif_carrier_off(dev->net);
+	ctx->tx_speed = ctx->rx_speed = 0;
+	return 0;
+
+error:
+	cdc_ncm_free((struct cdc_ncm_ctx *)dev->data[0]);
+	dev->data[0] = 0;
+	dev_info(&dev->udev->dev, "Descriptor failure\n");
+	return -ENODEV;
+}
+
+static void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	struct usb_driver *driver;
+
+	if (ctx == NULL)
+		return;		/* no setup */
+
+	driver = driver_of(intf);
+
+	usb_set_intfdata(ctx->data, NULL);
+	usb_set_intfdata(ctx->control, NULL);
+	usb_set_intfdata(ctx->intf, NULL);
+
+	/* release interfaces, if any */
+	if (ctx->data_claimed) {
+		usb_driver_release_interface(driver, ctx->data);
+		ctx->data_claimed = 0;
+	}
+
+	if (ctx->control_claimed) {
+		usb_driver_release_interface(driver, ctx->control);
+		ctx->control_claimed = 0;
+	}
+
+	cdc_ncm_free(ctx);
+}
+
+static void cdc_ncm_zero_fill(u8 *ptr, u32 first, u32 end, u32 max)
+{
+	if (first >= max)
+		return;
+	if (first >= end)
+		return;
+	if (end > max)
+		end = max;
+	memset(ptr + first, 0, end - first);
+}
+
+static struct sk_buff *
+cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb)
+{
+	struct sk_buff *skb_out;
+	u32 rem;
+	u32 offset;
+	u32 last_offset;
+	u16 n = 0;
+	u8 timeout = 0;
+
+	/* if there is a remaining skb, it gets priority */
+	if (skb != NULL)
+		swap(skb, ctx->tx_rem_skb);
+	else
+		timeout = 1;
+
+	/*
+	 * +----------------+
+	 * | skb_out        |
+	 * +----------------+
+	 *           ^ offset
+	 *        ^ last_offset
+	 */
+
+	/* check if we are resuming an OUT skb */
+	if (ctx->tx_curr_skb != NULL) {
+		/* pop variables */
+		skb_out = ctx->tx_curr_skb;
+		offset = ctx->tx_curr_offset;
+		last_offset = ctx->tx_curr_last_offset;
+		n = ctx->tx_curr_frame_num;
+
+	} else {
+		/* reset variables */
+		skb_out = alloc_skb(ctx->tx_max, GFP_ATOMIC);
+		if (skb_out == NULL) {
+			if (skb != NULL) {
+				dev_kfree_skb_any(skb);
+				ctx->netdev->stats.tx_dropped++;
+			}
+			goto exit_no_skb;
+		}
+
+		/* make room for NTH and NDP */
+		offset = ALIGN(sizeof(struct usb_cdc_ncm_nth16),
+					ctx->tx_ndp_modulus) +
+					sizeof(struct usb_cdc_ncm_ndp16) +
+					(ctx->tx_max_datagrams + 1) *
+					sizeof(struct usb_cdc_ncm_dpe16);
+
+		/* store last valid offset before alignment */
+		last_offset = offset;
+		/* align first Datagram offset correctly */
+		offset = ALIGN(offset, ctx->tx_modulus) + ctx->tx_remainder;
+		/* zero buffer till the first IP datagram */
+		cdc_ncm_zero_fill(skb_out->data, 0, offset, offset);
+		n = 0;
+		ctx->tx_curr_frame_num = 0;
+	}
+
+	for (; n < ctx->tx_max_datagrams; n++) {
+		/* check if end of transmit buffer is reached */
+		if (offset >= ctx->tx_max)
+			break;
+
+		/* compute maximum buffer size */
+		rem = ctx->tx_max - offset;
+
+		if (skb == NULL) {
+			skb = ctx->tx_rem_skb;
+			ctx->tx_rem_skb = NULL;
+
+			/* check for end of skb */
+			if (skb == NULL)
+				break;
+		}
+
+		if (skb->len > rem) {
+			if (n == 0) {
+				/* won't fit, MTU problem? */
+				dev_kfree_skb_any(skb);
+				skb = NULL;
+				ctx->netdev->stats.tx_dropped++;
+			} else {
+				/* no room for skb - store for later */
+				if (ctx->tx_rem_skb != NULL) {
+					dev_kfree_skb_any(ctx->tx_rem_skb);
+					ctx->netdev->stats.tx_dropped++;
+				}
+				ctx->tx_rem_skb = skb;
+				skb = NULL;
+
+				/* loop one more time */
+				timeout = 1;
+			}
+			break;
+		}
+
+		memcpy(((u8 *)skb_out->data) + offset, skb->data, skb->len);
+
+		ctx->tx_ncm.dpe16[n].wDatagramLength = cpu_to_le16(skb->len);
+		ctx->tx_ncm.dpe16[n].wDatagramIndex = cpu_to_le16(offset);
+
+		/* update offset */
+		offset += skb->len;
+
+		/* store last valid offset before alignment */
+		last_offset = offset;
+
+		/* align offset correctly */
+		offset = ALIGN(offset, ctx->tx_modulus) + ctx->tx_remainder;
+
+		/* zero padding */
+		cdc_ncm_zero_fill(skb_out->data, last_offset, offset,
+								ctx->tx_max);
+		dev_kfree_skb_any(skb);
+		skb = NULL;
+	}
+
+	/* free up any dangling skb */
+	if (skb != NULL) {
+		dev_kfree_skb_any(skb);
+		skb = NULL;
+		ctx->netdev->stats.tx_dropped++;
+	}
+
+	ctx->tx_curr_frame_num = n;
+
+	if (n == 0) {
+		/* wait for more frames */
+		/* push variables */
+		ctx->tx_curr_skb = skb_out;
+		ctx->tx_curr_offset = offset;
+		ctx->tx_curr_last_offset = last_offset;
+		goto exit_no_skb;
+
+	} else if ((n < ctx->tx_max_datagrams) && (timeout == 0)) {
+		/* wait for more frames */
+		/* push variables */
+		ctx->tx_curr_skb = skb_out;
+		ctx->tx_curr_offset = offset;
+		ctx->tx_curr_last_offset = last_offset;
+		/* set the pending count */
+		if (n < CDC_NCM_RESTART_TIMER_DATAGRAM_CNT)
+			ctx->tx_timer_pending = 2;
+		goto exit_no_skb;
+
+	} else {
+		/* frame goes out */
+		/* variables will be reset at next call */
+	}
+
+	/* check for overflow */
+	if (last_offset > ctx->tx_max)
+		last_offset = ctx->tx_max;
+
+	/* revert offset */
+	offset = last_offset;
+
+	/*
+	 * If collected data size is less or equal CDC_NCM_MIN_TX_PKT bytes,
+	 * we send buffers as it is. If we get more data, it would be more
+	 * efficient for USB HS mobile device with DMA engine to receive a full
+	 * size NTB, than canceling DMA transfer and receiving a short packet.
+	 */
+	if (offset > CDC_NCM_MIN_TX_PKT)
+		offset = ctx->tx_max;
+
+	/* final zero padding */
+	cdc_ncm_zero_fill(skb_out->data, last_offset, offset, ctx->tx_max);
+
+	/* store last offset */
+	last_offset = offset;
+
+	if ((last_offset < ctx->tx_max) && ((last_offset %
+			le16_to_cpu(ctx->out_ep->desc.wMaxPacketSize)) == 0)) {
+		/* force short packet */
+		*(((u8 *)skb_out->data) + last_offset) = 0;
+		last_offset++;
+	}
+
+	/* zero the rest of the DPEs plus the last NULL entry */
+	for (; n <= CDC_NCM_DPT_DATAGRAMS_MAX; n++) {
+		ctx->tx_ncm.dpe16[n].wDatagramLength = 0;
+		ctx->tx_ncm.dpe16[n].wDatagramIndex = 0;
+	}
+
+	/* fill out 16-bit NTB header */
+	ctx->tx_ncm.nth16.dwSignature = cpu_to_le32(USB_CDC_NCM_NTH16_SIGN);
+	ctx->tx_ncm.nth16.wHeaderLength =
+					cpu_to_le16(sizeof(ctx->tx_ncm.nth16));
+	ctx->tx_ncm.nth16.wSequence = cpu_to_le16(ctx->tx_seq);
+	ctx->tx_ncm.nth16.wBlockLength = cpu_to_le16(last_offset);
+	ctx->tx_ncm.nth16.wFpIndex = ALIGN(sizeof(struct usb_cdc_ncm_nth16),
+							ctx->tx_ndp_modulus);
+
+	memcpy(skb_out->data, &(ctx->tx_ncm.nth16), sizeof(ctx->tx_ncm.nth16));
+	ctx->tx_seq++;
+
+	/* fill out 16-bit NDP table */
+	ctx->tx_ncm.ndp16.dwSignature =
+				cpu_to_le32(USB_CDC_NCM_NDP16_NOCRC_SIGN);
+	rem = sizeof(ctx->tx_ncm.ndp16) + ((ctx->tx_curr_frame_num + 1) *
+					sizeof(struct usb_cdc_ncm_dpe16));
+	ctx->tx_ncm.ndp16.wLength = cpu_to_le16(rem);
+	ctx->tx_ncm.ndp16.wNextFpIndex = 0; /* reserved */
+
+	memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wFpIndex,
+						&(ctx->tx_ncm.ndp16),
+						sizeof(ctx->tx_ncm.ndp16));
+
+	memcpy(((u8 *)skb_out->data) + ctx->tx_ncm.nth16.wFpIndex +
+					sizeof(ctx->tx_ncm.ndp16),
+					&(ctx->tx_ncm.dpe16),
+					(ctx->tx_curr_frame_num + 1) *
+					sizeof(struct usb_cdc_ncm_dpe16));
+
+	/* set frame length */
+	skb_put(skb_out, last_offset);
+
+	/* return skb */
+	ctx->tx_curr_skb = NULL;
+	return skb_out;
+
+exit_no_skb:
+	return NULL;
+}
+
+static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx)
+{
+	/* start timer, if not already started */
+	if (timer_pending(&ctx->tx_timer) == 0) {
+		ctx->tx_timer.function = &cdc_ncm_tx_timeout;
+		ctx->tx_timer.data = (unsigned long)ctx;
+		ctx->tx_timer.expires = jiffies + ((HZ + 999) / 1000);
+		add_timer(&ctx->tx_timer);
+	}
+}
+
+static void cdc_ncm_tx_timeout(unsigned long arg)
+{
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)arg;
+	u8 restart;
+
+	spin_lock(&ctx->mtx);
+	if (ctx->tx_timer_pending != 0) {
+		ctx->tx_timer_pending--;
+		restart = 1;
+	} else
+		restart = 0;
+
+	spin_unlock(&ctx->mtx);
+
+	if (restart)
+		cdc_ncm_tx_timeout_start(ctx);
+	else if (ctx->netdev != NULL)
+		usbnet_start_xmit(NULL, ctx->netdev);
+}
+
+static struct sk_buff *
+cdc_ncm_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *skb_out;
+	struct cdc_ncm_ctx *ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	u8 need_timer = 0;
+
+	/*
+	 * The Ethernet API we are using does not support transmitting
+	 * multiple Ethernet frames in a single call. This driver will
+	 * accumulate multiple Ethernet frames and send out a larger
+	 * USB frame when the USB buffer is full or when a single jiffies
+	 * timeout happens.
+	 */
+	if (ctx == NULL)
+		goto error;
+
+	spin_lock(&ctx->mtx);
+	skb_out = cdc_ncm_fill_tx_frame(ctx, skb);
+	if (ctx->tx_curr_skb != NULL)
+		need_timer = 1;
+	spin_unlock(&ctx->mtx);
+
+	/* Start timer, if there is a remaining skb */
+	if (need_timer)
+		cdc_ncm_tx_timeout_start(ctx);
+
+	if (skb_out)
+		dev->net->stats.tx_packets += ctx->tx_curr_frame_num;
+	return skb_out;
+
+error:
+	if (skb != NULL)
+		dev_kfree_skb_any(skb);
+
+	return NULL;
+}
+
+static int cdc_ncm_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in)
+{
+	struct sk_buff *skb;
+	struct cdc_ncm_ctx *ctx;
+	int sumlen;
+	int actlen;
+	int temp;
+	int nframes;
+	int x;
+	int offset;
+
+	ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	if (ctx == NULL)
+		goto error;
+
+	actlen = skb_in->len;
+	sumlen = CDC_NCM_NTB_MAX_SIZE_RX;
+
+	if (actlen < (sizeof(ctx->rx_ncm.nth16) + sizeof(ctx->rx_ncm.ndp16))) {
+		pr_debug("frame too short\n");
+		goto error;
+	}
+
+	memcpy(&(ctx->rx_ncm.nth16), ((u8 *)skb_in->data),
+						sizeof(ctx->rx_ncm.nth16));
+
+	if (le32_to_cpu(ctx->rx_ncm.nth16.dwSignature) !=
+	    USB_CDC_NCM_NTH16_SIGN) {
+		pr_debug("invalid NTH16 signature <%u>\n",
+			 le32_to_cpu(ctx->rx_ncm.nth16.dwSignature));
+		goto error;
+	}
+
+	temp = le16_to_cpu(ctx->rx_ncm.nth16.wBlockLength);
+	if (temp > sumlen) {
+		pr_debug("unsupported NTB block length %u/%u\n", temp, sumlen);
+		goto error;
+	}
+
+	temp = le16_to_cpu(ctx->rx_ncm.nth16.wFpIndex);
+	if ((temp + sizeof(ctx->rx_ncm.ndp16)) > actlen) {
+		pr_debug("invalid DPT16 index\n");
+		goto error;
+	}
+
+	memcpy(&(ctx->rx_ncm.ndp16), ((u8 *)skb_in->data) + temp,
+						sizeof(ctx->rx_ncm.ndp16));
+
+	if (le32_to_cpu(ctx->rx_ncm.ndp16.dwSignature) !=
+	    USB_CDC_NCM_NDP16_NOCRC_SIGN) {
+		pr_debug("invalid DPT16 signature <%u>\n",
+			 le32_to_cpu(ctx->rx_ncm.ndp16.dwSignature));
+		goto error;
+	}
+
+	if (le16_to_cpu(ctx->rx_ncm.ndp16.wLength) <
+	    USB_CDC_NCM_NDP16_LENGTH_MIN) {
+		pr_debug("invalid DPT16 length <%u>\n",
+			 le32_to_cpu(ctx->rx_ncm.ndp16.dwSignature));
+		goto error;
+	}
+
+	nframes = ((le16_to_cpu(ctx->rx_ncm.ndp16.wLength) -
+					sizeof(struct usb_cdc_ncm_ndp16)) /
+					sizeof(struct usb_cdc_ncm_dpe16));
+	nframes--; /* we process NDP entries except for the last one */
+
+	pr_debug("nframes = %u\n", nframes);
+
+	temp += sizeof(ctx->rx_ncm.ndp16);
+
+	if ((temp + nframes * (sizeof(struct usb_cdc_ncm_dpe16))) > actlen) {
+		pr_debug("Invalid nframes = %d\n", nframes);
+		goto error;
+	}
+
+	if (nframes > CDC_NCM_DPT_DATAGRAMS_MAX) {
+		pr_debug("Truncating number of frames from %u to %u\n",
+					nframes, CDC_NCM_DPT_DATAGRAMS_MAX);
+		nframes = CDC_NCM_DPT_DATAGRAMS_MAX;
+	}
+
+	memcpy(&(ctx->rx_ncm.dpe16), ((u8 *)skb_in->data) + temp,
+				nframes * (sizeof(struct usb_cdc_ncm_dpe16)));
+
+	for (x = 0; x < nframes; x++) {
+		offset = le16_to_cpu(ctx->rx_ncm.dpe16[x].wDatagramIndex);
+		temp = le16_to_cpu(ctx->rx_ncm.dpe16[x].wDatagramLength);
+
+		/*
+		 * CDC NCM ch. 3.7
+		 * All entries after first NULL entry are to be ignored
+		 */
+		if ((offset == 0) || (temp == 0)) {
+			if (!x)
+				goto error; /* empty NTB */
+			break;
+		}
+
+		/* sanity checking */
+		if (((offset + temp) > actlen) ||
+		    (temp > CDC_NCM_MAX_DATAGRAM_SIZE) || (temp < ETH_HLEN)) {
+			pr_debug("invalid frame detected (ignored)"
+				"offset[%u]=%u, length=%u, skb=%p\n",
+							x, offset, temp, skb);
+			if (!x)
+				goto error;
+			break;
+
+		} else {
+			skb = skb_clone(skb_in, GFP_ATOMIC);
+			skb->len = temp;
+			skb->data = ((u8 *)skb_in->data) + offset;
+			skb_set_tail_pointer(skb, temp);
+			usbnet_skb_return(dev, skb);
+		}
+	}
+	return 1;
+error:
+	return 0;
+}
+
+static void
+cdc_ncm_speed_change(struct cdc_ncm_ctx *ctx,
+		     struct connection_speed_change *data)
+{
+	uint32_t rx_speed = le32_to_cpu(data->USBitRate);
+	uint32_t tx_speed = le32_to_cpu(data->DSBitRate);
+
+	/*
+	 * Currently the USB-NET API does not support reporting the actual
+	 * device speed. Do print it instead.
+	 */
+	if ((tx_speed != ctx->tx_speed) || (rx_speed != ctx->rx_speed)) {
+		ctx->tx_speed = tx_speed;
+		ctx->rx_speed = rx_speed;
+
+		if ((tx_speed > 1000000) && (rx_speed > 1000000)) {
+			printk(KERN_INFO KBUILD_MODNAME
+				": %s: %u mbit/s downlink "
+				"%u mbit/s uplink\n",
+				ctx->netdev->name,
+				(unsigned int)(rx_speed / 1000000U),
+				(unsigned int)(tx_speed / 1000000U));
+		} else {
+			printk(KERN_INFO KBUILD_MODNAME
+				": %s: %u kbit/s downlink "
+				"%u kbit/s uplink\n",
+				ctx->netdev->name,
+				(unsigned int)(rx_speed / 1000U),
+				(unsigned int)(tx_speed / 1000U));
+		}
+	}
+}
+
+static void cdc_ncm_status(struct usbnet *dev, struct urb *urb)
+{
+	struct cdc_ncm_ctx *ctx;
+	struct usb_cdc_notification *event;
+
+	ctx = (struct cdc_ncm_ctx *)dev->data[0];
+
+	if (urb->actual_length < sizeof(*event))
+		return;
+
+	/* test for split data in 8-byte chunks */
+	if (test_and_clear_bit(EVENT_STS_SPLIT, &dev->flags)) {
+		cdc_ncm_speed_change(ctx,
+		      (struct connection_speed_change *)urb->transfer_buffer);
+		return;
+	}
+
+	event = urb->transfer_buffer;
+
+	switch (event->bNotificationType) {
+	case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+		/*
+		 * According to the CDC NCM specification ch.7.1
+		 * USB_CDC_NOTIFY_NETWORK_CONNECTION notification shall be
+		 * sent by device after USB_CDC_NOTIFY_SPEED_CHANGE.
+		 */
+		ctx->connected = event->wValue;
+
+		printk(KERN_INFO KBUILD_MODNAME ": %s: network connection:"
+			" %sconnected\n",
+			ctx->netdev->name, ctx->connected ? "" : "dis");
+
+		if (ctx->connected)
+			netif_carrier_on(dev->net);
+		else {
+			netif_carrier_off(dev->net);
+			ctx->tx_speed = ctx->rx_speed = 0;
+		}
+		break;
+
+	case USB_CDC_NOTIFY_SPEED_CHANGE:
+		if (urb->actual_length <
+		    (sizeof(*event) + sizeof(struct connection_speed_change)))
+			set_bit(EVENT_STS_SPLIT, &dev->flags);
+		else
+			cdc_ncm_speed_change(ctx,
+				(struct connection_speed_change *) &event[1]);
+		break;
+
+	default:
+		dev_err(&dev->udev->dev, "NCM: unexpected "
+			"notification 0x%02x!\n", event->bNotificationType);
+		break;
+	}
+}
+
+static int cdc_ncm_check_connect(struct usbnet *dev)
+{
+	struct cdc_ncm_ctx *ctx;
+
+	ctx = (struct cdc_ncm_ctx *)dev->data[0];
+	if (ctx == NULL)
+		return 1;	/* disconnected */
+
+	return !ctx->connected;
+}
+
+static int
+cdc_ncm_probe(struct usb_interface *udev, const struct usb_device_id *prod)
+{
+	return usbnet_probe(udev, prod);
+}
+
+static void cdc_ncm_disconnect(struct usb_interface *intf)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+
+	if (dev == NULL)
+		return;		/* already disconnected */
+
+	usbnet_disconnect(intf);
+}
+
+static int cdc_ncm_manage_power(struct usbnet *dev, int status)
+{
+	dev->intf->needs_remote_wakeup = status;
+	return 0;
+}
+
+static const struct driver_info cdc_ncm_info = {
+	.description = "CDC NCM",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET,
+	.bind = cdc_ncm_bind,
+	.unbind = cdc_ncm_unbind,
+	.check_connect = cdc_ncm_check_connect,
+	.manage_power = cdc_ncm_manage_power,
+	.status = cdc_ncm_status,
+	.rx_fixup = cdc_ncm_rx_fixup,
+	.tx_fixup = cdc_ncm_tx_fixup,
+};
+
+static struct usb_driver cdc_ncm_driver = {
+	.name = "cdc_ncm",
+	.id_table = cdc_devs,
+	.probe = cdc_ncm_probe,
+	.disconnect = cdc_ncm_disconnect,
+	.suspend = usbnet_suspend,
+	.resume = usbnet_resume,
+	.supports_autosuspend = 1,
+};
+
+static struct ethtool_ops cdc_ncm_ethtool_ops = {
+	.get_drvinfo = cdc_ncm_get_drvinfo,
+	.get_link = usbnet_get_link,
+	.get_msglevel = usbnet_get_msglevel,
+	.set_msglevel = usbnet_set_msglevel,
+	.get_settings = usbnet_get_settings,
+	.set_settings = usbnet_set_settings,
+	.nway_reset = usbnet_nway_reset,
+};
+
+static int __init cdc_ncm_init(void)
+{
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION "\n");
+	return usb_register(&cdc_ncm_driver);
+}
+
+module_init(cdc_ncm_init);
+
+static void __exit cdc_ncm_exit(void)
+{
+	usb_deregister(&cdc_ncm_driver);
+}
+
+module_exit(cdc_ncm_exit);
+
+MODULE_AUTHOR("Hans Petter Selasky");
+MODULE_DESCRIPTION("USB CDC NCM host driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index b154a94de03..bed8fcedff4 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -958,10 +958,6 @@ static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
 				/* Packet is complete. Inject into stack. */
 				/* We have IP packet here */
 				odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
-				/* don't check it */
-				odev->skb_rx_buf->ip_summed =
-					CHECKSUM_UNNECESSARY;
-
 				skb_reset_mac_header(odev->skb_rx_buf);
 
 				/* Ship it off to the kernel */
@@ -1001,6 +997,18 @@ static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
 	}
 }
 
+static void fix_crc_bug(struct urb *urb, __le16 max_packet_size)
+{
+	static const u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
+	u32 rest = urb->actual_length % le16_to_cpu(max_packet_size);
+
+	if (((rest == 5) || (rest == 6)) &&
+	    !memcmp(((u8 *)urb->transfer_buffer) + urb->actual_length - 4,
+		    crc_check, 4)) {
+		urb->actual_length -= 4;
+	}
+}
+
 /* Moving data from usb to kernel (in interrupt state) */
 static void read_bulk_callback(struct urb *urb)
 {
@@ -1029,17 +1037,8 @@ static void read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	if (odev->parent->port_spec & HSO_INFO_CRC_BUG) {
-		u32 rest;
-		u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
-		rest = urb->actual_length %
-			le16_to_cpu(odev->in_endp->wMaxPacketSize);
-		if (((rest == 5) || (rest == 6)) &&
-		    !memcmp(((u8 *) urb->transfer_buffer) +
-			    urb->actual_length - 4, crc_check, 4)) {
-			urb->actual_length -= 4;
-		}
-	}
+	if (odev->parent->port_spec & HSO_INFO_CRC_BUG)
+		fix_crc_bug(urb, odev->in_endp->wMaxPacketSize);
 
 	/* do we even have a packet? */
 	if (urb->actual_length) {
@@ -1231,18 +1230,8 @@ static void hso_std_serial_read_bulk_callback(struct urb *urb)
 		return;
 
 	if (status == 0) {
-		if (serial->parent->port_spec & HSO_INFO_CRC_BUG) {
-			u32 rest;
-			u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
-			rest =
-			    urb->actual_length %
-			    le16_to_cpu(serial->in_endp->wMaxPacketSize);
-			if (((rest == 5) || (rest == 6)) &&
-			    !memcmp(((u8 *) urb->transfer_buffer) +
-				    urb->actual_length - 4, crc_check, 4)) {
-				urb->actual_length -= 4;
-			}
-		}
+		if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
+			fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
 		/* Valid data, handle RX data */
 		spin_lock(&serial->serial_lock);
 		serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
@@ -1745,7 +1734,6 @@ static int hso_serial_ioctl(struct tty_struct *tty, struct file *file,
 			    unsigned int cmd, unsigned long arg)
 {
 	struct hso_serial *serial =  get_serial_by_tty(tty);
-	void __user *uarg = (void __user *)arg;
 	int ret = 0;
 	D4("IOCTL cmd: %d, arg: %ld", cmd, arg);
 
@@ -2994,12 +2982,14 @@ static int hso_probe(struct usb_interface *interface,
 
 	case HSO_INTF_BULK:
 		/* It's a regular bulk interface */
-		if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) &&
-		    !disable_net)
-			hso_dev = hso_create_net_device(interface, port_spec);
-		else
+		if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+			if (!disable_net)
+				hso_dev =
+				    hso_create_net_device(interface, port_spec);
+		} else {
 			hso_dev =
 			    hso_create_bulk_serial_device(interface, port_spec);
+		}
 		if (!hso_dev)
 			goto exit;
 		break;
diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index a6281e3987b..2b791392e78 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -1,5 +1,5 @@
 /*
- * MOSCHIP MCS7830 based USB 2.0 Ethernet Devices
+ * MOSCHIP MCS7830 based (7730/7830/7832) USB 2.0 Ethernet Devices
  *
  * based on usbnet.c, asix.c and the vendor provided mcs7830 driver
  *
@@ -11,6 +11,9 @@
  *
  * Definitions gathered from MOSCHIP, Data Sheet_7830DA.pdf (thanks!).
  *
+ * 2010-12-19: add 7832 USB PID ("functionality same as MCS7830"),
+ *             per active notification by manufacturer
+ *
  * TODO:
  * - support HIF_REG_CONFIG_SLEEPMODE/HIF_REG_CONFIG_TXENABLE (via autopm?)
  * - implement ethtool_ops get_pauseparam/set_pauseparam
@@ -60,6 +63,7 @@
 #define MCS7830_MAX_MCAST	64
 
 #define MCS7830_VENDOR_ID	0x9710
+#define MCS7832_PRODUCT_ID	0x7832
 #define MCS7830_PRODUCT_ID	0x7830
 #define MCS7730_PRODUCT_ID	0x7730
 
@@ -351,7 +355,7 @@ static int mcs7830_set_autoneg(struct usbnet *dev, int ptrUserPhyMode)
 	if (!ret)
 		ret = mcs7830_write_phy(dev, MII_BMCR,
 				BMCR_ANENABLE | BMCR_ANRESTART	);
-	return ret < 0 ? : 0;
+	return ret;
 }
 
 
@@ -626,7 +630,7 @@ static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 }
 
 static const struct driver_info moschip_info = {
-	.description	= "MOSCHIP 7830/7730 usb-NET adapter",
+	.description	= "MOSCHIP 7830/7832/7730 usb-NET adapter",
 	.bind		= mcs7830_bind,
 	.rx_fixup	= mcs7830_rx_fixup,
 	.flags		= FLAG_ETHER,
@@ -645,6 +649,10 @@ static const struct driver_info sitecom_info = {
 
 static const struct usb_device_id products[] = {
 	{
+		USB_DEVICE(MCS7830_VENDOR_ID, MCS7832_PRODUCT_ID),
+		.driver_info = (unsigned long) &moschip_info,
+	},
+	{
 		USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
 		.driver_info = (unsigned long) &moschip_info,
 	},
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index 6710f09346d..ef3667690b1 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -359,7 +359,7 @@ fail:
 
 static int mdio_read(struct net_device *dev, int phy_id, int loc)
 {
-	pegasus_t *pegasus = (pegasus_t *) netdev_priv(dev);
+	pegasus_t *pegasus = netdev_priv(dev);
 	u16 res;
 
 	read_mii_word(pegasus, phy_id, loc, &res);
@@ -397,7 +397,7 @@ fail:
 
 static void mdio_write(struct net_device *dev, int phy_id, int loc, int val)
 {
-	pegasus_t *pegasus = (pegasus_t *) netdev_priv(dev);
+	pegasus_t *pegasus = netdev_priv(dev);
 
 	write_mii_word(pegasus, phy_id, loc, val);
 }
diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c
index d1ac15c95fa..ed1b4321058 100644
--- a/drivers/net/usb/sierra_net.c
+++ b/drivers/net/usb/sierra_net.c
@@ -802,10 +802,9 @@ static void sierra_net_unbind(struct usbnet *dev, struct usb_interface *intf)
 
 	dev_dbg(&dev->udev->dev, "%s", __func__);
 
-	/* Kill the timer then flush the work queue */
+	/* kill the timer and work */
 	del_timer_sync(&priv->sync_timer);
-
-	flush_scheduled_work();
+	cancel_work_sync(&priv->sierra_net_kevent);
 
 	/* tell modem we are going away */
 	status = sierra_net_send_cmd(dev, priv->shdwn_msg,
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 65cb1abfbe5..bc86f4b6ecc 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1163,9 +1163,8 @@ static int smsc95xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 
 static u32 smsc95xx_calc_csum_preamble(struct sk_buff *skb)
 {
-	int len = skb->data - skb->head;
-	u16 high_16 = (u16)(skb->csum_offset + skb->csum_start - len);
-	u16 low_16 = (u16)(skb->csum_start - len);
+	u16 low_16 = (u16)skb_checksum_start_offset(skb);
+	u16 high_16 = low_16 + skb->csum_offset;
 	return (high_16 << 16) | low_16;
 }
 
@@ -1193,7 +1192,7 @@ static struct sk_buff *smsc95xx_tx_fixup(struct usbnet *dev,
 		if (skb->len <= 45) {
 			/* workaround - hardware tx checksum does not work
 			 * properly with extremely small packets */
-			long csstart = skb->csum_start - skb_headroom(skb);
+			long csstart = skb_checksum_start_offset(skb);
 			__wsum calc = csum_partial(skb->data + csstart,
 				skb->len - csstart, 0);
 			*((__sum16 *)(skb->data + csstart
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index c04d49e31f8..ed9a41643ff 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -391,14 +391,19 @@ static inline void rx_process (struct usbnet *dev, struct sk_buff *skb)
 		goto error;
 	// else network stack removes extra byte if we forced a short packet
 
-	if (skb->len)
-		usbnet_skb_return (dev, skb);
-	else {
-		netif_dbg(dev, rx_err, dev->net, "drop\n");
-error:
-		dev->net->stats.rx_errors++;
-		skb_queue_tail (&dev->done, skb);
+	if (skb->len) {
+		/* all data was already cloned from skb inside the driver */
+		if (dev->driver_info->flags & FLAG_MULTI_PACKET)
+			dev_kfree_skb_any(skb);
+		else
+			usbnet_skb_return(dev, skb);
+		return;
 	}
+
+	netif_dbg(dev, rx_err, dev->net, "drop\n");
+error:
+	dev->net->stats.rx_errors++;
+	skb_queue_tail(&dev->done, skb);
 }
 
 /*-------------------------------------------------------------------------*/
@@ -971,7 +976,8 @@ static void tx_complete (struct urb *urb)
 	struct usbnet		*dev = entry->dev;
 
 	if (urb->status == 0) {
-		dev->net->stats.tx_packets++;
+		if (!(dev->driver_info->flags & FLAG_MULTI_PACKET))
+			dev->net->stats.tx_packets++;
 		dev->net->stats.tx_bytes += entry->length;
 	} else {
 		dev->net->stats.tx_errors++;
@@ -1044,8 +1050,13 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 	if (info->tx_fixup) {
 		skb = info->tx_fixup (dev, skb, GFP_ATOMIC);
 		if (!skb) {
-			netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
-			goto drop;
+			if (netif_msg_tx_err(dev)) {
+				netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n");
+				goto drop;
+			} else {
+				/* cdc_ncm collected packet; waits for more */
+				goto not_drop;
+			}
 		}
 	}
 	length = skb->len;
@@ -1067,13 +1078,18 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 	/* don't assume the hardware handles USB_ZERO_PACKET
 	 * NOTE:  strictly conforming cdc-ether devices should expect
 	 * the ZLP here, but ignore the one-byte packet.
+	 * NOTE2: CDC NCM specification is different from CDC ECM when
+	 * handling ZLP/short packets, so cdc_ncm driver will make short
+	 * packet itself if needed.
 	 */
 	if (length % dev->maxpacket == 0) {
 		if (!(info->flags & FLAG_SEND_ZLP)) {
-			urb->transfer_buffer_length++;
-			if (skb_tailroom(skb)) {
-				skb->data[skb->len] = 0;
-				__skb_put(skb, 1);
+			if (!(info->flags & FLAG_MULTI_PACKET)) {
+				urb->transfer_buffer_length++;
+				if (skb_tailroom(skb)) {
+					skb->data[skb->len] = 0;
+					__skb_put(skb, 1);
+				}
 			}
 		} else
 			urb->transfer_flags |= URB_ZERO_PACKET;
@@ -1122,6 +1138,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb,
 		netif_dbg(dev, tx_err, dev->net, "drop, code %d\n", retval);
 drop:
 		dev->net->stats.tx_dropped++;
+not_drop:
 		if (skb)
 			dev_kfree_skb_any (skb);
 		usb_free_urb (urb);
@@ -1231,8 +1248,7 @@ void usbnet_disconnect (struct usb_interface *intf)
 	net = dev->net;
 	unregister_netdev (net);
 
-	/* we don't hold rtnl here ... */
-	flush_scheduled_work ();
+	cancel_work_sync(&dev->kevent);
 
 	if (dev->driver_info->unbind)
 		dev->driver_info->unbind (dev, intf);
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index 0bbc0c32313..cc83fa71c3f 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -166,7 +166,9 @@ static netdev_tx_t veth_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (!(rcv->flags & IFF_UP))
 		goto tx_drop;
 
-	if (dev->features & NETIF_F_NO_CSUM)
+	/* don't change ip_summed == CHECKSUM_PARTIAL, as that
+	   will cause bad checksum on forwarded packets */
+	if (skb->ip_summed == CHECKSUM_NONE)
 		skb->ip_summed = rcv_priv->ip_summed;
 
 	length = skb->len + ETH_HLEN;
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 4930f9dbc49..5e7f069eab5 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -30,8 +30,8 @@
 */
 
 #define DRV_NAME	"via-rhine"
-#define DRV_VERSION	"1.4.3"
-#define DRV_RELDATE	"2007-03-06"
+#define DRV_VERSION	"1.5.0"
+#define DRV_RELDATE	"2010-10-09"
 
 
 /* A few user-configurable values.
@@ -100,6 +100,7 @@ static const int multicast_filter_limit = 32;
 #include <linux/mii.h>
 #include <linux/ethtool.h>
 #include <linux/crc32.h>
+#include <linux/if_vlan.h>
 #include <linux/bitops.h>
 #include <linux/workqueue.h>
 #include <asm/processor.h>	/* Processor type for cache alignment. */
@@ -133,6 +134,9 @@ MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
 MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
 MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
 
+#define MCAM_SIZE	32
+#define VCAM_SIZE	32
+
 /*
 		Theory of Operation
 
@@ -279,15 +283,16 @@ MODULE_DEVICE_TABLE(pci, rhine_pci_tbl);
 /* Offsets to the device registers. */
 enum register_offsets {
 	StationAddr=0x00, RxConfig=0x06, TxConfig=0x07, ChipCmd=0x08,
-	ChipCmd1=0x09,
+	ChipCmd1=0x09, TQWake=0x0A,
 	IntrStatus=0x0C, IntrEnable=0x0E,
 	MulticastFilter0=0x10, MulticastFilter1=0x14,
 	RxRingPtr=0x18, TxRingPtr=0x1C, GFIFOTest=0x54,
-	MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E,
+	MIIPhyAddr=0x6C, MIIStatus=0x6D, PCIBusConfig=0x6E, PCIBusConfig1=0x6F,
 	MIICmd=0x70, MIIRegAddr=0x71, MIIData=0x72, MACRegEEcsr=0x74,
 	ConfigA=0x78, ConfigB=0x79, ConfigC=0x7A, ConfigD=0x7B,
 	RxMissed=0x7C, RxCRCErrs=0x7E, MiscCmd=0x81,
 	StickyHW=0x83, IntrStatus2=0x84,
+	CamMask=0x88, CamCon=0x92, CamAddr=0x93,
 	WOLcrSet=0xA0, PwcfgSet=0xA1, WOLcgSet=0xA3, WOLcrClr=0xA4,
 	WOLcrClr1=0xA6, WOLcgClr=0xA7,
 	PwrcsrSet=0xA8, PwrcsrSet1=0xA9, PwrcsrClr=0xAC, PwrcsrClr1=0xAD,
@@ -299,6 +304,40 @@ enum backoff_bits {
 	BackCaptureEffect=0x04, BackRandom=0x08
 };
 
+/* Bits in the TxConfig (TCR) register */
+enum tcr_bits {
+	TCR_PQEN=0x01,
+	TCR_LB0=0x02,		/* loopback[0] */
+	TCR_LB1=0x04,		/* loopback[1] */
+	TCR_OFSET=0x08,
+	TCR_RTGOPT=0x10,
+	TCR_RTFT0=0x20,
+	TCR_RTFT1=0x40,
+	TCR_RTSF=0x80,
+};
+
+/* Bits in the CamCon (CAMC) register */
+enum camcon_bits {
+	CAMC_CAMEN=0x01,
+	CAMC_VCAMSL=0x02,
+	CAMC_CAMWR=0x04,
+	CAMC_CAMRD=0x08,
+};
+
+/* Bits in the PCIBusConfig1 (BCR1) register */
+enum bcr1_bits {
+	BCR1_POT0=0x01,
+	BCR1_POT1=0x02,
+	BCR1_POT2=0x04,
+	BCR1_CTFT0=0x08,
+	BCR1_CTFT1=0x10,
+	BCR1_CTSF=0x20,
+	BCR1_TXQNOBK=0x40,	/* for VT6105 */
+	BCR1_VIDFR=0x80,	/* for VT6105 */
+	BCR1_MED0=0x40,		/* for VT6102 */
+	BCR1_MED1=0x80,		/* for VT6102 */
+};
+
 #ifdef USE_MMIO
 /* Registers we check that mmio and reg are the same. */
 static const int mmio_verify_registers[] = {
@@ -356,6 +395,11 @@ enum desc_status_bits {
 	DescOwn=0x80000000
 };
 
+/* Bits in *_desc.*_length */
+enum desc_length_bits {
+	DescTag=0x00010000
+};
+
 /* Bits in ChipCmd. */
 enum chip_cmd_bits {
 	CmdInit=0x01, CmdStart=0x02, CmdStop=0x04, CmdRxOn=0x08,
@@ -365,6 +409,9 @@ enum chip_cmd_bits {
 };
 
 struct rhine_private {
+	/* Bit mask for configured VLAN ids */
+	unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+
 	/* Descriptor rings */
 	struct rx_desc *rx_ring;
 	struct tx_desc *tx_ring;
@@ -405,6 +452,23 @@ struct rhine_private {
 	void __iomem *base;
 };
 
+#define BYTE_REG_BITS_ON(x, p)      do { iowrite8((ioread8((p))|(x)), (p)); } while (0)
+#define WORD_REG_BITS_ON(x, p)      do { iowrite16((ioread16((p))|(x)), (p)); } while (0)
+#define DWORD_REG_BITS_ON(x, p)     do { iowrite32((ioread32((p))|(x)), (p)); } while (0)
+
+#define BYTE_REG_BITS_IS_ON(x, p)   (ioread8((p)) & (x))
+#define WORD_REG_BITS_IS_ON(x, p)   (ioread16((p)) & (x))
+#define DWORD_REG_BITS_IS_ON(x, p)  (ioread32((p)) & (x))
+
+#define BYTE_REG_BITS_OFF(x, p)     do { iowrite8(ioread8((p)) & (~(x)), (p)); } while (0)
+#define WORD_REG_BITS_OFF(x, p)     do { iowrite16(ioread16((p)) & (~(x)), (p)); } while (0)
+#define DWORD_REG_BITS_OFF(x, p)    do { iowrite32(ioread32((p)) & (~(x)), (p)); } while (0)
+
+#define BYTE_REG_BITS_SET(x, m, p)   do { iowrite8((ioread8((p)) & (~(m)))|(x), (p)); } while (0)
+#define WORD_REG_BITS_SET(x, m, p)   do { iowrite16((ioread16((p)) & (~(m)))|(x), (p)); } while (0)
+#define DWORD_REG_BITS_SET(x, m, p)  do { iowrite32((ioread32((p)) & (~(m)))|(x), (p)); } while (0)
+
+
 static int  mdio_read(struct net_device *dev, int phy_id, int location);
 static void mdio_write(struct net_device *dev, int phy_id, int location, int value);
 static int  rhine_open(struct net_device *dev);
@@ -422,6 +486,14 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
 static const struct ethtool_ops netdev_ethtool_ops;
 static int  rhine_close(struct net_device *dev);
 static void rhine_shutdown (struct pci_dev *pdev);
+static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid);
+static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid);
+static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr);
+static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr);
+static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask);
+static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask);
+static void rhine_init_cam_filter(struct net_device *dev);
+static void rhine_update_vcam(struct net_device *dev);
 
 #define RHINE_WAIT_FOR(condition) do {					\
 	int i=1024;							\
@@ -629,6 +701,8 @@ static const struct net_device_ops rhine_netdev_ops = {
 	.ndo_set_mac_address 	 = eth_mac_addr,
 	.ndo_do_ioctl		 = netdev_ioctl,
 	.ndo_tx_timeout 	 = rhine_tx_timeout,
+	.ndo_vlan_rx_add_vid	 = rhine_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	 = rhine_vlan_rx_kill_vid,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	 = rhine_poll,
 #endif
@@ -795,6 +869,10 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
 	if (rp->quirks & rqRhineI)
 		dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
 
+	if (pdev->revision >= VT6105M)
+		dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX |
+		NETIF_F_HW_VLAN_FILTER;
+
 	/* dev->name not defined before register_netdev()! */
 	rc = register_netdev(dev);
 	if (rc)
@@ -1040,6 +1118,167 @@ static void rhine_set_carrier(struct mii_if_info *mii)
 		       netif_carrier_ok(mii->dev));
 }
 
+/**
+ * rhine_set_cam - set CAM multicast filters
+ * @ioaddr: register block of this Rhine
+ * @idx: multicast CAM index [0..MCAM_SIZE-1]
+ * @addr: multicast address (6 bytes)
+ *
+ * Load addresses into multicast filters.
+ */
+static void rhine_set_cam(void __iomem *ioaddr, int idx, u8 *addr)
+{
+	int i;
+
+	iowrite8(CAMC_CAMEN, ioaddr + CamCon);
+	wmb();
+
+	/* Paranoid -- idx out of range should never happen */
+	idx &= (MCAM_SIZE - 1);
+
+	iowrite8((u8) idx, ioaddr + CamAddr);
+
+	for (i = 0; i < 6; i++, addr++)
+		iowrite8(*addr, ioaddr + MulticastFilter0 + i);
+	udelay(10);
+	wmb();
+
+	iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon);
+	udelay(10);
+
+	iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_vlan_cam - set CAM VLAN filters
+ * @ioaddr: register block of this Rhine
+ * @idx: VLAN CAM index [0..VCAM_SIZE-1]
+ * @addr: VLAN ID (2 bytes)
+ *
+ * Load addresses into VLAN filters.
+ */
+static void rhine_set_vlan_cam(void __iomem *ioaddr, int idx, u8 *addr)
+{
+	iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon);
+	wmb();
+
+	/* Paranoid -- idx out of range should never happen */
+	idx &= (VCAM_SIZE - 1);
+
+	iowrite8((u8) idx, ioaddr + CamAddr);
+
+	iowrite16(*((u16 *) addr), ioaddr + MulticastFilter0 + 6);
+	udelay(10);
+	wmb();
+
+	iowrite8(CAMC_CAMWR | CAMC_CAMEN, ioaddr + CamCon);
+	udelay(10);
+
+	iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_cam_mask - set multicast CAM mask
+ * @ioaddr: register block of this Rhine
+ * @mask: multicast CAM mask
+ *
+ * Mask sets multicast filters active/inactive.
+ */
+static void rhine_set_cam_mask(void __iomem *ioaddr, u32 mask)
+{
+	iowrite8(CAMC_CAMEN, ioaddr + CamCon);
+	wmb();
+
+	/* write mask */
+	iowrite32(mask, ioaddr + CamMask);
+
+	/* disable CAMEN */
+	iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_set_vlan_cam_mask - set VLAN CAM mask
+ * @ioaddr: register block of this Rhine
+ * @mask: VLAN CAM mask
+ *
+ * Mask sets VLAN filters active/inactive.
+ */
+static void rhine_set_vlan_cam_mask(void __iomem *ioaddr, u32 mask)
+{
+	iowrite8(CAMC_CAMEN | CAMC_VCAMSL, ioaddr + CamCon);
+	wmb();
+
+	/* write mask */
+	iowrite32(mask, ioaddr + CamMask);
+
+	/* disable CAMEN */
+	iowrite8(0, ioaddr + CamCon);
+}
+
+/**
+ * rhine_init_cam_filter - initialize CAM filters
+ * @dev: network device
+ *
+ * Initialize (disable) hardware VLAN and multicast support on this
+ * Rhine.
+ */
+static void rhine_init_cam_filter(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+
+	/* Disable all CAMs */
+	rhine_set_vlan_cam_mask(ioaddr, 0);
+	rhine_set_cam_mask(ioaddr, 0);
+
+	/* disable hardware VLAN support */
+	BYTE_REG_BITS_ON(TCR_PQEN, ioaddr + TxConfig);
+	BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+}
+
+/**
+ * rhine_update_vcam - update VLAN CAM filters
+ * @rp: rhine_private data of this Rhine
+ *
+ * Update VLAN CAM filters to match configuration change.
+ */
+static void rhine_update_vcam(struct net_device *dev)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+	void __iomem *ioaddr = rp->base;
+	u16 vid;
+	u32 vCAMmask = 0;	/* 32 vCAMs (6105M and better) */
+	unsigned int i = 0;
+
+	for_each_set_bit(vid, rp->active_vlans, VLAN_N_VID) {
+		rhine_set_vlan_cam(ioaddr, i, (u8 *)&vid);
+		vCAMmask |= 1 << i;
+		if (++i >= VCAM_SIZE)
+			break;
+	}
+	rhine_set_vlan_cam_mask(ioaddr, vCAMmask);
+}
+
+static void rhine_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	spin_lock_irq(&rp->lock);
+	set_bit(vid, rp->active_vlans);
+	rhine_update_vcam(dev);
+	spin_unlock_irq(&rp->lock);
+}
+
+static void rhine_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+	struct rhine_private *rp = netdev_priv(dev);
+
+	spin_lock_irq(&rp->lock);
+	clear_bit(vid, rp->active_vlans);
+	rhine_update_vcam(dev);
+	spin_unlock_irq(&rp->lock);
+}
+
 static void init_registers(struct net_device *dev)
 {
 	struct rhine_private *rp = netdev_priv(dev);
@@ -1061,6 +1300,9 @@ static void init_registers(struct net_device *dev)
 
 	rhine_set_rx_mode(dev);
 
+	if (rp->pdev->revision >= VT6105M)
+		rhine_init_cam_filter(dev);
+
 	napi_enable(&rp->napi);
 
 	/* Enable interrupts by setting the interrupt mask. */
@@ -1276,16 +1518,28 @@ static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
 	rp->tx_ring[entry].desc_length =
 		cpu_to_le32(TXDESC | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN));
 
+	if (unlikely(vlan_tx_tag_present(skb))) {
+		rp->tx_ring[entry].tx_status = cpu_to_le32((vlan_tx_tag_get(skb)) << 16);
+		/* request tagging */
+		rp->tx_ring[entry].desc_length |= cpu_to_le32(0x020000);
+	}
+	else
+		rp->tx_ring[entry].tx_status = 0;
+
 	/* lock eth irq */
 	spin_lock_irqsave(&rp->lock, flags);
 	wmb();
-	rp->tx_ring[entry].tx_status = cpu_to_le32(DescOwn);
+	rp->tx_ring[entry].tx_status |= cpu_to_le32(DescOwn);
 	wmb();
 
 	rp->cur_tx++;
 
 	/* Non-x86 Todo: explicitly flush cache lines here. */
 
+	if (vlan_tx_tag_present(skb))
+		/* Tx queues are bits 7-0 (first Tx queue: bit 7) */
+		BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake);
+
 	/* Wake the potentially-idle transmit channel */
 	iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
 	       ioaddr + ChipCmd1);
@@ -1437,6 +1691,21 @@ static void rhine_tx(struct net_device *dev)
 	spin_unlock(&rp->lock);
 }
 
+/**
+ * rhine_get_vlan_tci - extract TCI from Rx data buffer
+ * @skb: pointer to sk_buff
+ * @data_size: used data area of the buffer including CRC
+ *
+ * If hardware VLAN tag extraction is enabled and the chip indicates a 802.1Q
+ * packet, the extracted 802.1Q header (2 bytes TPID + 2 bytes TCI) is 4-byte
+ * aligned following the CRC.
+ */
+static inline u16 rhine_get_vlan_tci(struct sk_buff *skb, int data_size)
+{
+	u8 *trailer = (u8 *)skb->data + ((data_size + 3) & ~3) + 2;
+	return ntohs(*(u16 *)trailer);
+}
+
 /* Process up to limit frames from receive ring */
 static int rhine_rx(struct net_device *dev, int limit)
 {
@@ -1454,6 +1723,7 @@ static int rhine_rx(struct net_device *dev, int limit)
 	for (count = 0; count < limit; ++count) {
 		struct rx_desc *desc = rp->rx_head_desc;
 		u32 desc_status = le32_to_cpu(desc->rx_status);
+		u32 desc_length = le32_to_cpu(desc->desc_length);
 		int data_size = desc_status >> 16;
 
 		if (desc_status & DescOwn)
@@ -1498,6 +1768,7 @@ static int rhine_rx(struct net_device *dev, int limit)
 			struct sk_buff *skb = NULL;
 			/* Length should omit the CRC */
 			int pkt_len = data_size - 4;
+			u16 vlan_tci = 0;
 
 			/* Check if the packet is long enough to accept without
 			   copying to a minimally-sized skbuff. */
@@ -1532,7 +1803,14 @@ static int rhine_rx(struct net_device *dev, int limit)
 						 rp->rx_buf_sz,
 						 PCI_DMA_FROMDEVICE);
 			}
+
+			if (unlikely(desc_length & DescTag))
+				vlan_tci = rhine_get_vlan_tci(skb, data_size);
+
 			skb->protocol = eth_type_trans(skb, dev);
+
+			if (unlikely(desc_length & DescTag))
+				__vlan_hwaccel_put_tag(skb, vlan_tci);
 			netif_receive_skb(skb);
 			dev->stats.rx_bytes += pkt_len;
 			dev->stats.rx_packets++;
@@ -1596,6 +1874,11 @@ static void rhine_restart_tx(struct net_device *dev) {
 
 		iowrite8(ioread8(ioaddr + ChipCmd) | CmdTxOn,
 		       ioaddr + ChipCmd);
+
+		if (rp->tx_ring[entry].desc_length & cpu_to_le32(0x020000))
+			/* Tx queues are bits 7-0 (first Tx queue: bit 7) */
+			BYTE_REG_BITS_ON(1 << 7, ioaddr + TQWake);
+
 		iowrite8(ioread8(ioaddr + ChipCmd1) | Cmd1TxDemand,
 		       ioaddr + ChipCmd1);
 		IOSYNC;
@@ -1631,7 +1914,7 @@ static void rhine_error(struct net_device *dev, int intr_status)
 	}
 	if (intr_status & IntrTxUnderrun) {
 		if (rp->tx_thresh < 0xE0)
-			iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig);
+			BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
 		if (debug > 1)
 			printk(KERN_INFO "%s: Transmitter underrun, Tx "
 			       "threshold now %2.2x.\n",
@@ -1646,7 +1929,7 @@ static void rhine_error(struct net_device *dev, int intr_status)
 	    (intr_status & (IntrTxAborted |
 	     IntrTxUnderrun | IntrTxDescRace)) == 0) {
 		if (rp->tx_thresh < 0xE0) {
-			iowrite8(rp->tx_thresh += 0x20, ioaddr + TxConfig);
+			BYTE_REG_BITS_SET((rp->tx_thresh += 0x20), 0x80, ioaddr + TxConfig);
 		}
 		if (debug > 1)
 			printk(KERN_INFO "%s: Unspecified error. Tx "
@@ -1688,7 +1971,8 @@ static void rhine_set_rx_mode(struct net_device *dev)
 	struct rhine_private *rp = netdev_priv(dev);
 	void __iomem *ioaddr = rp->base;
 	u32 mc_filter[2];	/* Multicast hash filter */
-	u8 rx_mode;		/* Note: 0x02=accept runt, 0x01=accept errs */
+	u8 rx_mode = 0x0C;	/* Note: 0x02=accept runt, 0x01=accept errs */
+	struct netdev_hw_addr *ha;
 
 	if (dev->flags & IFF_PROMISC) {		/* Set promiscuous. */
 		rx_mode = 0x1C;
@@ -1699,10 +1983,18 @@ static void rhine_set_rx_mode(struct net_device *dev)
 		/* Too many to match, or accept all multicasts. */
 		iowrite32(0xffffffff, ioaddr + MulticastFilter0);
 		iowrite32(0xffffffff, ioaddr + MulticastFilter1);
-		rx_mode = 0x0C;
+	} else if (rp->pdev->revision >= VT6105M) {
+		int i = 0;
+		u32 mCAMmask = 0;	/* 32 mCAMs (6105M and better) */
+		netdev_for_each_mc_addr(ha, dev) {
+			if (i == MCAM_SIZE)
+				break;
+			rhine_set_cam(ioaddr, i, ha->addr);
+			mCAMmask |= 1 << i;
+			i++;
+		}
+		rhine_set_cam_mask(ioaddr, mCAMmask);
 	} else {
-		struct netdev_hw_addr *ha;
-
 		memset(mc_filter, 0, sizeof(mc_filter));
 		netdev_for_each_mc_addr(ha, dev) {
 			int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
@@ -1711,9 +2003,15 @@ static void rhine_set_rx_mode(struct net_device *dev)
 		}
 		iowrite32(mc_filter[0], ioaddr + MulticastFilter0);
 		iowrite32(mc_filter[1], ioaddr + MulticastFilter1);
-		rx_mode = 0x0C;
 	}
-	iowrite8(rp->rx_thresh | rx_mode, ioaddr + RxConfig);
+	/* enable/disable VLAN receive filtering */
+	if (rp->pdev->revision >= VT6105M) {
+		if (dev->flags & IFF_PROMISC)
+			BYTE_REG_BITS_OFF(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+		else
+			BYTE_REG_BITS_ON(BCR1_VIDFR, ioaddr + PCIBusConfig1);
+	}
+	BYTE_REG_BITS_ON(rx_mode, ioaddr + RxConfig);
 }
 
 static void netdev_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
@@ -1966,7 +2264,7 @@ static int rhine_resume(struct pci_dev *pdev)
 	if (!netif_running(dev))
 		return 0;
 
-        if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
+	if (request_irq(dev->irq, rhine_interrupt, IRQF_SHARED, dev->name, dev))
 		printk(KERN_ERR "via-rhine %s: request_irq failed\n", dev->name);
 
 	ret = pci_set_power_state(pdev, PCI_D0);
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index bb6b67f6b0c..90a23e410d1 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -519,7 +519,7 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
 		hdr->hdr.flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
-		hdr->hdr.csum_start = skb->csum_start - skb_headroom(skb);
+		hdr->hdr.csum_start = skb_checksum_start_offset(skb);
 		hdr->hdr.csum_offset = skb->csum_offset;
 	} else {
 		hdr->hdr.flags = 0;
@@ -986,9 +986,15 @@ static int virtnet_probe(struct virtio_device *vdev)
 		goto unregister;
 	}
 
-	vi->status = VIRTIO_NET_S_LINK_UP;
-	virtnet_update_status(vi);
-	netif_carrier_on(dev);
+	/* Assume link up if device can't report link status,
+	   otherwise get link status from config. */
+	if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
+		netif_carrier_off(dev);
+		virtnet_update_status(vi);
+	} else {
+		vi->status = VIRTIO_NET_S_LINK_UP;
+		netif_carrier_on(dev);
+	}
 
 	pr_debug("virtnet: registered device %s\n", dev->name);
 	return 0;
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index 21314e06e6d..d143e8b72b5 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -44,6 +44,9 @@ MODULE_DEVICE_TABLE(pci, vmxnet3_pciid_table);
 
 static atomic_t devices_found;
 
+#define VMXNET3_MAX_DEVICES 10
+static int enable_mq = 1;
+static int irq_share_mode;
 
 /*
  *    Enable/Disable the given intr
@@ -99,7 +102,7 @@ vmxnet3_ack_events(struct vmxnet3_adapter *adapter, u32 events)
 static bool
 vmxnet3_tq_stopped(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
 {
-	return netif_queue_stopped(adapter->netdev);
+	return tq->stopped;
 }
 
 
@@ -107,7 +110,7 @@ static void
 vmxnet3_tq_start(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
 {
 	tq->stopped = false;
-	netif_start_queue(adapter->netdev);
+	netif_start_subqueue(adapter->netdev, tq - adapter->tx_queue);
 }
 
 
@@ -115,7 +118,7 @@ static void
 vmxnet3_tq_wake(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
 {
 	tq->stopped = false;
-	netif_wake_queue(adapter->netdev);
+	netif_wake_subqueue(adapter->netdev, (tq - adapter->tx_queue));
 }
 
 
@@ -124,7 +127,7 @@ vmxnet3_tq_stop(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
 {
 	tq->stopped = true;
 	tq->num_stop++;
-	netif_stop_queue(adapter->netdev);
+	netif_stop_subqueue(adapter->netdev, (tq - adapter->tx_queue));
 }
 
 
@@ -135,6 +138,7 @@ static void
 vmxnet3_check_link(struct vmxnet3_adapter *adapter, bool affectTxQueue)
 {
 	u32 ret;
+	int i;
 
 	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_LINK);
 	ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
@@ -145,22 +149,28 @@ vmxnet3_check_link(struct vmxnet3_adapter *adapter, bool affectTxQueue)
 		if (!netif_carrier_ok(adapter->netdev))
 			netif_carrier_on(adapter->netdev);
 
-		if (affectTxQueue)
-			vmxnet3_tq_start(&adapter->tx_queue, adapter);
+		if (affectTxQueue) {
+			for (i = 0; i < adapter->num_tx_queues; i++)
+				vmxnet3_tq_start(&adapter->tx_queue[i],
+						 adapter);
+		}
 	} else {
 		printk(KERN_INFO "%s: NIC Link is Down\n",
 		       adapter->netdev->name);
 		if (netif_carrier_ok(adapter->netdev))
 			netif_carrier_off(adapter->netdev);
 
-		if (affectTxQueue)
-			vmxnet3_tq_stop(&adapter->tx_queue, adapter);
+		if (affectTxQueue) {
+			for (i = 0; i < adapter->num_tx_queues; i++)
+				vmxnet3_tq_stop(&adapter->tx_queue[i], adapter);
+		}
 	}
 }
 
 static void
 vmxnet3_process_events(struct vmxnet3_adapter *adapter)
 {
+	int i;
 	u32 events = le32_to_cpu(adapter->shared->ecr);
 	if (!events)
 		return;
@@ -176,16 +186,18 @@ vmxnet3_process_events(struct vmxnet3_adapter *adapter)
 		VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
 				       VMXNET3_CMD_GET_QUEUE_STATUS);
 
-		if (adapter->tqd_start->status.stopped) {
-			printk(KERN_ERR "%s: tq error 0x%x\n",
-			       adapter->netdev->name,
-			       le32_to_cpu(adapter->tqd_start->status.error));
-		}
-		if (adapter->rqd_start->status.stopped) {
-			printk(KERN_ERR "%s: rq error 0x%x\n",
-			       adapter->netdev->name,
-			       adapter->rqd_start->status.error);
-		}
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			if (adapter->tqd_start[i].status.stopped)
+				dev_err(&adapter->netdev->dev,
+					"%s: tq[%d] error 0x%x\n",
+					adapter->netdev->name, i, le32_to_cpu(
+					adapter->tqd_start[i].status.error));
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			if (adapter->rqd_start[i].status.stopped)
+				dev_err(&adapter->netdev->dev,
+					"%s: rq[%d] error 0x%x\n",
+					adapter->netdev->name, i,
+					adapter->rqd_start[i].status.error);
 
 		schedule_work(&adapter->work);
 	}
@@ -410,7 +422,7 @@ vmxnet3_tq_cleanup(struct vmxnet3_tx_queue *tq,
 }
 
 
-void
+static void
 vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq,
 		   struct vmxnet3_adapter *adapter)
 {
@@ -437,6 +449,17 @@ vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq,
 }
 
 
+/* Destroy all tx queues */
+void
+vmxnet3_tq_destroy_all(struct vmxnet3_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		vmxnet3_tq_destroy(&adapter->tx_queue[i], adapter);
+}
+
+
 static void
 vmxnet3_tq_init(struct vmxnet3_tx_queue *tq,
 		struct vmxnet3_adapter *adapter)
@@ -518,6 +541,14 @@ err:
 	return -ENOMEM;
 }
 
+static void
+vmxnet3_tq_cleanup_all(struct vmxnet3_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		vmxnet3_tq_cleanup(&adapter->tx_queue[i], adapter);
+}
 
 /*
  *    starting from ring->next2fill, allocate rx buffers for the given ring
@@ -732,6 +763,17 @@ vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx,
 }
 
 
+/* Init all tx queues */
+static void
+vmxnet3_tq_init_all(struct vmxnet3_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		vmxnet3_tq_init(&adapter->tx_queue[i], adapter);
+}
+
+
 /*
  *    parse and copy relevant protocol headers:
  *      For a tso pkt, relevant headers are L2/3/4 including options
@@ -756,7 +798,7 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
 {
 	struct Vmxnet3_TxDataDesc *tdd;
 
-	if (ctx->mss) {
+	if (ctx->mss) {	/* TSO */
 		ctx->eth_ip_hdr_size = skb_transport_offset(skb);
 		ctx->l4_hdr_size = ((struct tcphdr *)
 				   skb_transport_header(skb))->doff * 4;
@@ -765,7 +807,7 @@ vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
 		unsigned int pull_size;
 
 		if (skb->ip_summed == CHECKSUM_PARTIAL) {
-			ctx->eth_ip_hdr_size = skb_transport_offset(skb);
+			ctx->eth_ip_hdr_size = skb_checksum_start_offset(skb);
 
 			if (ctx->ipv4) {
 				struct iphdr *iph = (struct iphdr *)
@@ -903,6 +945,21 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
 		}
 	}
 
+	spin_lock_irqsave(&tq->tx_lock, flags);
+
+	if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) {
+		tq->stats.tx_ring_full++;
+		dev_dbg(&adapter->netdev->dev,
+			"tx queue stopped on %s, next2comp %u"
+			" next2fill %u\n", adapter->netdev->name,
+			tq->tx_ring.next2comp, tq->tx_ring.next2fill);
+
+		vmxnet3_tq_stop(tq, adapter);
+		spin_unlock_irqrestore(&tq->tx_lock, flags);
+		return NETDEV_TX_BUSY;
+	}
+
+
 	ret = vmxnet3_parse_and_copy_hdr(skb, tq, &ctx, adapter);
 	if (ret >= 0) {
 		BUG_ON(ret <= 0 && ctx.copy_size != 0);
@@ -923,21 +980,7 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
 		}
 	} else {
 		tq->stats.drop_hdr_inspect_err++;
-		goto drop_pkt;
-	}
-
-	spin_lock_irqsave(&tq->tx_lock, flags);
-
-	if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) {
-		tq->stats.tx_ring_full++;
-		dev_dbg(&adapter->netdev->dev,
-			"tx queue stopped on %s, next2comp %u"
-			" next2fill %u\n", adapter->netdev->name,
-			tq->tx_ring.next2comp, tq->tx_ring.next2fill);
-
-		vmxnet3_tq_stop(tq, adapter);
-		spin_unlock_irqrestore(&tq->tx_lock, flags);
-		return NETDEV_TX_BUSY;
+		goto unlock_drop_pkt;
 	}
 
 	/* fill tx descs related to addr & len */
@@ -1000,7 +1043,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
 	if (le32_to_cpu(tq->shared->txNumDeferred) >=
 					le32_to_cpu(tq->shared->txThreshold)) {
 		tq->shared->txNumDeferred = 0;
-		VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_TXPROD,
+		VMXNET3_WRITE_BAR0_REG(adapter,
+				       VMXNET3_REG_TXPROD + tq->qid * 8,
 				       tq->tx_ring.next2fill);
 	}
 
@@ -1008,6 +1052,8 @@ vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
 
 hdr_too_big:
 	tq->stats.drop_oversized_hdr++;
+unlock_drop_pkt:
+	spin_unlock_irqrestore(&tq->tx_lock, flags);
 drop_pkt:
 	tq->stats.drop_total++;
 	dev_kfree_skb(skb);
@@ -1020,7 +1066,10 @@ vmxnet3_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
 
-	return vmxnet3_tq_xmit(skb, &adapter->tx_queue, adapter, netdev);
+		BUG_ON(skb->queue_mapping > adapter->num_tx_queues);
+		return vmxnet3_tq_xmit(skb,
+				       &adapter->tx_queue[skb->queue_mapping],
+				       adapter, netdev);
 }
 
 
@@ -1082,7 +1131,9 @@ static int
 vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
 		       struct vmxnet3_adapter *adapter, int quota)
 {
-	static u32 rxprod_reg[2] = {VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2};
+	static const u32 rxprod_reg[2] = {
+		VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2
+	};
 	u32 num_rxd = 0;
 	struct Vmxnet3_RxCompDesc *rcd;
 	struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx;
@@ -1106,9 +1157,9 @@ vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
 			break;
 		}
 		num_rxd++;
-
+		BUG_ON(rcd->rqID != rq->qid && rcd->rqID != rq->qid2);
 		idx = rcd->rxdIdx;
-		ring_idx = rcd->rqID == rq->qid ? 0 : 1;
+		ring_idx = rcd->rqID < adapter->num_rx_queues ? 0 : 1;
 		vmxnet3_getRxDesc(rxd, &rq->rx_ring[ring_idx].base[idx].rxd,
 				  &rxCmdDesc);
 		rbi = rq->buf_info[ring_idx] + idx;
@@ -1260,6 +1311,16 @@ vmxnet3_rq_cleanup(struct vmxnet3_rx_queue *rq,
 }
 
 
+static void
+vmxnet3_rq_cleanup_all(struct vmxnet3_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		vmxnet3_rq_cleanup(&adapter->rx_queue[i], adapter);
+}
+
+
 void vmxnet3_rq_destroy(struct vmxnet3_rx_queue *rq,
 			struct vmxnet3_adapter *adapter)
 {
@@ -1351,6 +1412,25 @@ vmxnet3_rq_init(struct vmxnet3_rx_queue *rq,
 
 
 static int
+vmxnet3_rq_init_all(struct vmxnet3_adapter *adapter)
+{
+	int i, err = 0;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		err = vmxnet3_rq_init(&adapter->rx_queue[i], adapter);
+		if (unlikely(err)) {
+			dev_err(&adapter->netdev->dev, "%s: failed to "
+				"initialize rx queue%i\n",
+				adapter->netdev->name, i);
+			break;
+		}
+	}
+	return err;
+
+}
+
+
+static int
 vmxnet3_rq_create(struct vmxnet3_rx_queue *rq, struct vmxnet3_adapter *adapter)
 {
 	int i;
@@ -1398,33 +1478,177 @@ err:
 
 
 static int
+vmxnet3_rq_create_all(struct vmxnet3_adapter *adapter)
+{
+	int i, err = 0;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		err = vmxnet3_rq_create(&adapter->rx_queue[i], adapter);
+		if (unlikely(err)) {
+			dev_err(&adapter->netdev->dev,
+				"%s: failed to create rx queue%i\n",
+				adapter->netdev->name, i);
+			goto err_out;
+		}
+	}
+	return err;
+err_out:
+	vmxnet3_rq_destroy_all(adapter);
+	return err;
+
+}
+
+/* Multiple queue aware polling function for tx and rx */
+
+static int
 vmxnet3_do_poll(struct vmxnet3_adapter *adapter, int budget)
 {
+	int rcd_done = 0, i;
 	if (unlikely(adapter->shared->ecr))
 		vmxnet3_process_events(adapter);
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		vmxnet3_tq_tx_complete(&adapter->tx_queue[i], adapter);
 
-	vmxnet3_tq_tx_complete(&adapter->tx_queue, adapter);
-	return vmxnet3_rq_rx_complete(&adapter->rx_queue, adapter, budget);
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		rcd_done += vmxnet3_rq_rx_complete(&adapter->rx_queue[i],
+						   adapter, budget);
+	return rcd_done;
 }
 
 
 static int
 vmxnet3_poll(struct napi_struct *napi, int budget)
 {
-	struct vmxnet3_adapter *adapter = container_of(napi,
-					  struct vmxnet3_adapter, napi);
+	struct vmxnet3_rx_queue *rx_queue = container_of(napi,
+					  struct vmxnet3_rx_queue, napi);
+	int rxd_done;
+
+	rxd_done = vmxnet3_do_poll(rx_queue->adapter, budget);
+
+	if (rxd_done < budget) {
+		napi_complete(napi);
+		vmxnet3_enable_all_intrs(rx_queue->adapter);
+	}
+	return rxd_done;
+}
+
+/*
+ * NAPI polling function for MSI-X mode with multiple Rx queues
+ * Returns the # of the NAPI credit consumed (# of rx descriptors processed)
+ */
+
+static int
+vmxnet3_poll_rx_only(struct napi_struct *napi, int budget)
+{
+	struct vmxnet3_rx_queue *rq = container_of(napi,
+						struct vmxnet3_rx_queue, napi);
+	struct vmxnet3_adapter *adapter = rq->adapter;
 	int rxd_done;
 
-	rxd_done = vmxnet3_do_poll(adapter, budget);
+	/* When sharing interrupt with corresponding tx queue, process
+	 * tx completions in that queue as well
+	 */
+	if (adapter->share_intr == VMXNET3_INTR_BUDDYSHARE) {
+		struct vmxnet3_tx_queue *tq =
+				&adapter->tx_queue[rq - adapter->rx_queue];
+		vmxnet3_tq_tx_complete(tq, adapter);
+	}
+
+	rxd_done = vmxnet3_rq_rx_complete(rq, adapter, budget);
 
 	if (rxd_done < budget) {
 		napi_complete(napi);
-		vmxnet3_enable_intr(adapter, 0);
+		vmxnet3_enable_intr(adapter, rq->comp_ring.intr_idx);
 	}
 	return rxd_done;
 }
 
 
+#ifdef CONFIG_PCI_MSI
+
+/*
+ * Handle completion interrupts on tx queues
+ * Returns whether or not the intr is handled
+ */
+
+static irqreturn_t
+vmxnet3_msix_tx(int irq, void *data)
+{
+	struct vmxnet3_tx_queue *tq = data;
+	struct vmxnet3_adapter *adapter = tq->adapter;
+
+	if (adapter->intr.mask_mode == VMXNET3_IMM_ACTIVE)
+		vmxnet3_disable_intr(adapter, tq->comp_ring.intr_idx);
+
+	/* Handle the case where only one irq is allocate for all tx queues */
+	if (adapter->share_intr == VMXNET3_INTR_TXSHARE) {
+		int i;
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			struct vmxnet3_tx_queue *txq = &adapter->tx_queue[i];
+			vmxnet3_tq_tx_complete(txq, adapter);
+		}
+	} else {
+		vmxnet3_tq_tx_complete(tq, adapter);
+	}
+	vmxnet3_enable_intr(adapter, tq->comp_ring.intr_idx);
+
+	return IRQ_HANDLED;
+}
+
+
+/*
+ * Handle completion interrupts on rx queues. Returns whether or not the
+ * intr is handled
+ */
+
+static irqreturn_t
+vmxnet3_msix_rx(int irq, void *data)
+{
+	struct vmxnet3_rx_queue *rq = data;
+	struct vmxnet3_adapter *adapter = rq->adapter;
+
+	/* disable intr if needed */
+	if (adapter->intr.mask_mode == VMXNET3_IMM_ACTIVE)
+		vmxnet3_disable_intr(adapter, rq->comp_ring.intr_idx);
+	napi_schedule(&rq->napi);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ *----------------------------------------------------------------------------
+ *
+ * vmxnet3_msix_event --
+ *
+ *    vmxnet3 msix event intr handler
+ *
+ * Result:
+ *    whether or not the intr is handled
+ *
+ *----------------------------------------------------------------------------
+ */
+
+static irqreturn_t
+vmxnet3_msix_event(int irq, void *data)
+{
+	struct net_device *dev = data;
+	struct vmxnet3_adapter *adapter = netdev_priv(dev);
+
+	/* disable intr if needed */
+	if (adapter->intr.mask_mode == VMXNET3_IMM_ACTIVE)
+		vmxnet3_disable_intr(adapter, adapter->intr.event_intr_idx);
+
+	if (adapter->shared->ecr)
+		vmxnet3_process_events(adapter);
+
+	vmxnet3_enable_intr(adapter, adapter->intr.event_intr_idx);
+
+	return IRQ_HANDLED;
+}
+
+#endif /* CONFIG_PCI_MSI  */
+
+
 /* Interrupt handler for vmxnet3  */
 static irqreturn_t
 vmxnet3_intr(int irq, void *dev_id)
@@ -1432,7 +1656,7 @@ vmxnet3_intr(int irq, void *dev_id)
 	struct net_device *dev = dev_id;
 	struct vmxnet3_adapter *adapter = netdev_priv(dev);
 
-	if (unlikely(adapter->intr.type == VMXNET3_IT_INTX)) {
+	if (adapter->intr.type == VMXNET3_IT_INTX) {
 		u32 icr = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_ICR);
 		if (unlikely(icr == 0))
 			/* not ours */
@@ -1442,77 +1666,144 @@ vmxnet3_intr(int irq, void *dev_id)
 
 	/* disable intr if needed */
 	if (adapter->intr.mask_mode == VMXNET3_IMM_ACTIVE)
-		vmxnet3_disable_intr(adapter, 0);
+		vmxnet3_disable_all_intrs(adapter);
 
-	napi_schedule(&adapter->napi);
+	napi_schedule(&adapter->rx_queue[0].napi);
 
 	return IRQ_HANDLED;
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 
-
 /* netpoll callback. */
 static void
 vmxnet3_netpoll(struct net_device *netdev)
 {
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
-	int irq;
 
-#ifdef CONFIG_PCI_MSI
-	if (adapter->intr.type == VMXNET3_IT_MSIX)
-		irq = adapter->intr.msix_entries[0].vector;
-	else
-#endif
-		irq = adapter->pdev->irq;
+	if (adapter->intr.mask_mode == VMXNET3_IMM_ACTIVE)
+		vmxnet3_disable_all_intrs(adapter);
+
+	vmxnet3_do_poll(adapter, adapter->rx_queue[0].rx_ring[0].size);
+	vmxnet3_enable_all_intrs(adapter);
 
-	disable_irq(irq);
-	vmxnet3_intr(irq, netdev);
-	enable_irq(irq);
 }
-#endif
+#endif	/* CONFIG_NET_POLL_CONTROLLER */
 
 static int
 vmxnet3_request_irqs(struct vmxnet3_adapter *adapter)
 {
-	int err;
+	struct vmxnet3_intr *intr = &adapter->intr;
+	int err = 0, i;
+	int vector = 0;
 
 #ifdef CONFIG_PCI_MSI
 	if (adapter->intr.type == VMXNET3_IT_MSIX) {
-		/* we only use 1 MSI-X vector */
-		err = request_irq(adapter->intr.msix_entries[0].vector,
-				  vmxnet3_intr, 0, adapter->netdev->name,
-				  adapter->netdev);
-	} else if (adapter->intr.type == VMXNET3_IT_MSI) {
+		for (i = 0; i < adapter->num_tx_queues; i++) {
+			if (adapter->share_intr != VMXNET3_INTR_BUDDYSHARE) {
+				sprintf(adapter->tx_queue[i].name, "%s-tx-%d",
+					adapter->netdev->name, vector);
+				err = request_irq(
+					      intr->msix_entries[vector].vector,
+					      vmxnet3_msix_tx, 0,
+					      adapter->tx_queue[i].name,
+					      &adapter->tx_queue[i]);
+			} else {
+				sprintf(adapter->tx_queue[i].name, "%s-rxtx-%d",
+					adapter->netdev->name, vector);
+			}
+			if (err) {
+				dev_err(&adapter->netdev->dev,
+					"Failed to request irq for MSIX, %s, "
+					"error %d\n",
+					adapter->tx_queue[i].name, err);
+				return err;
+			}
+
+			/* Handle the case where only 1 MSIx was allocated for
+			 * all tx queues */
+			if (adapter->share_intr == VMXNET3_INTR_TXSHARE) {
+				for (; i < adapter->num_tx_queues; i++)
+					adapter->tx_queue[i].comp_ring.intr_idx
+								= vector;
+				vector++;
+				break;
+			} else {
+				adapter->tx_queue[i].comp_ring.intr_idx
+								= vector++;
+			}
+		}
+		if (adapter->share_intr == VMXNET3_INTR_BUDDYSHARE)
+			vector = 0;
+
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			if (adapter->share_intr != VMXNET3_INTR_BUDDYSHARE)
+				sprintf(adapter->rx_queue[i].name, "%s-rx-%d",
+					adapter->netdev->name, vector);
+			else
+				sprintf(adapter->rx_queue[i].name, "%s-rxtx-%d",
+					adapter->netdev->name, vector);
+			err = request_irq(intr->msix_entries[vector].vector,
+					  vmxnet3_msix_rx, 0,
+					  adapter->rx_queue[i].name,
+					  &(adapter->rx_queue[i]));
+			if (err) {
+				printk(KERN_ERR "Failed to request irq for MSIX"
+				       ", %s, error %d\n",
+				       adapter->rx_queue[i].name, err);
+				return err;
+			}
+
+			adapter->rx_queue[i].comp_ring.intr_idx = vector++;
+		}
+
+		sprintf(intr->event_msi_vector_name, "%s-event-%d",
+			adapter->netdev->name, vector);
+		err = request_irq(intr->msix_entries[vector].vector,
+				  vmxnet3_msix_event, 0,
+				  intr->event_msi_vector_name, adapter->netdev);
+		intr->event_intr_idx = vector;
+
+	} else if (intr->type == VMXNET3_IT_MSI) {
+		adapter->num_rx_queues = 1;
 		err = request_irq(adapter->pdev->irq, vmxnet3_intr, 0,
 				  adapter->netdev->name, adapter->netdev);
-	} else
+	} else {
 #endif
-	{
+		adapter->num_rx_queues = 1;
 		err = request_irq(adapter->pdev->irq, vmxnet3_intr,
 				  IRQF_SHARED, adapter->netdev->name,
 				  adapter->netdev);
+#ifdef CONFIG_PCI_MSI
 	}
-
-	if (err)
+#endif
+	intr->num_intrs = vector + 1;
+	if (err) {
 		printk(KERN_ERR "Failed to request irq %s (intr type:%d), error"
-		       ":%d\n", adapter->netdev->name, adapter->intr.type, err);
+		       ":%d\n", adapter->netdev->name, intr->type, err);
+	} else {
+		/* Number of rx queues will not change after this */
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			struct vmxnet3_rx_queue *rq = &adapter->rx_queue[i];
+			rq->qid = i;
+			rq->qid2 = i + adapter->num_rx_queues;
+		}
 
 
-	if (!err) {
-		int i;
-		/* init our intr settings */
-		for (i = 0; i < adapter->intr.num_intrs; i++)
-			adapter->intr.mod_levels[i] = UPT1_IML_ADAPTIVE;
 
-		/* next setup intr index for all intr sources */
-		adapter->tx_queue.comp_ring.intr_idx = 0;
-		adapter->rx_queue.comp_ring.intr_idx = 0;
-		adapter->intr.event_intr_idx = 0;
+		/* init our intr settings */
+		for (i = 0; i < intr->num_intrs; i++)
+			intr->mod_levels[i] = UPT1_IML_ADAPTIVE;
+		if (adapter->intr.type != VMXNET3_IT_MSIX) {
+			adapter->intr.event_intr_idx = 0;
+			for (i = 0; i < adapter->num_tx_queues; i++)
+				adapter->tx_queue[i].comp_ring.intr_idx = 0;
+			adapter->rx_queue[0].comp_ring.intr_idx = 0;
+		}
 
 		printk(KERN_INFO "%s: intr type %u, mode %u, %u vectors "
-		       "allocated\n", adapter->netdev->name, adapter->intr.type,
-		       adapter->intr.mask_mode, adapter->intr.num_intrs);
+		       "allocated\n", adapter->netdev->name, intr->type,
+		       intr->mask_mode, intr->num_intrs);
 	}
 
 	return err;
@@ -1522,18 +1813,32 @@ vmxnet3_request_irqs(struct vmxnet3_adapter *adapter)
 static void
 vmxnet3_free_irqs(struct vmxnet3_adapter *adapter)
 {
-	BUG_ON(adapter->intr.type == VMXNET3_IT_AUTO ||
-	       adapter->intr.num_intrs <= 0);
+	struct vmxnet3_intr *intr = &adapter->intr;
+	BUG_ON(intr->type == VMXNET3_IT_AUTO || intr->num_intrs <= 0);
 
-	switch (adapter->intr.type) {
+	switch (intr->type) {
 #ifdef CONFIG_PCI_MSI
 	case VMXNET3_IT_MSIX:
 	{
-		int i;
+		int i, vector = 0;
+
+		if (adapter->share_intr != VMXNET3_INTR_BUDDYSHARE) {
+			for (i = 0; i < adapter->num_tx_queues; i++) {
+				free_irq(intr->msix_entries[vector++].vector,
+					 &(adapter->tx_queue[i]));
+				if (adapter->share_intr == VMXNET3_INTR_TXSHARE)
+					break;
+			}
+		}
 
-		for (i = 0; i < adapter->intr.num_intrs; i++)
-			free_irq(adapter->intr.msix_entries[i].vector,
-				 adapter->netdev);
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			free_irq(intr->msix_entries[vector++].vector,
+				 &(adapter->rx_queue[i]));
+		}
+
+		free_irq(intr->msix_entries[vector].vector,
+			 adapter->netdev);
+		BUG_ON(vector >= intr->num_intrs);
 		break;
 	}
 #endif
@@ -1727,6 +2032,15 @@ vmxnet3_set_mc(struct net_device *netdev)
 	kfree(new_table);
 }
 
+void
+vmxnet3_rq_destroy_all(struct vmxnet3_adapter *adapter)
+{
+	int i;
+
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		vmxnet3_rq_destroy(&adapter->rx_queue[i], adapter);
+}
+
 
 /*
  *   Set up driver_shared based on settings in adapter.
@@ -1774,40 +2088,72 @@ vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter)
 	devRead->misc.mtu = cpu_to_le32(adapter->netdev->mtu);
 	devRead->misc.queueDescPA = cpu_to_le64(adapter->queue_desc_pa);
 	devRead->misc.queueDescLen = cpu_to_le32(
-				     sizeof(struct Vmxnet3_TxQueueDesc) +
-				     sizeof(struct Vmxnet3_RxQueueDesc));
+		adapter->num_tx_queues * sizeof(struct Vmxnet3_TxQueueDesc) +
+		adapter->num_rx_queues * sizeof(struct Vmxnet3_RxQueueDesc));
 
 	/* tx queue settings */
-	BUG_ON(adapter->tx_queue.tx_ring.base == NULL);
-
-	devRead->misc.numTxQueues = 1;
-	tqc = &adapter->tqd_start->conf;
-	tqc->txRingBasePA   = cpu_to_le64(adapter->tx_queue.tx_ring.basePA);
-	tqc->dataRingBasePA = cpu_to_le64(adapter->tx_queue.data_ring.basePA);
-	tqc->compRingBasePA = cpu_to_le64(adapter->tx_queue.comp_ring.basePA);
-	tqc->ddPA           = cpu_to_le64(virt_to_phys(
-						adapter->tx_queue.buf_info));
-	tqc->txRingSize     = cpu_to_le32(adapter->tx_queue.tx_ring.size);
-	tqc->dataRingSize   = cpu_to_le32(adapter->tx_queue.data_ring.size);
-	tqc->compRingSize   = cpu_to_le32(adapter->tx_queue.comp_ring.size);
-	tqc->ddLen          = cpu_to_le32(sizeof(struct vmxnet3_tx_buf_info) *
-			      tqc->txRingSize);
-	tqc->intrIdx        = adapter->tx_queue.comp_ring.intr_idx;
+	devRead->misc.numTxQueues =  adapter->num_tx_queues;
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct vmxnet3_tx_queue	*tq = &adapter->tx_queue[i];
+		BUG_ON(adapter->tx_queue[i].tx_ring.base == NULL);
+		tqc = &adapter->tqd_start[i].conf;
+		tqc->txRingBasePA   = cpu_to_le64(tq->tx_ring.basePA);
+		tqc->dataRingBasePA = cpu_to_le64(tq->data_ring.basePA);
+		tqc->compRingBasePA = cpu_to_le64(tq->comp_ring.basePA);
+		tqc->ddPA           = cpu_to_le64(virt_to_phys(tq->buf_info));
+		tqc->txRingSize     = cpu_to_le32(tq->tx_ring.size);
+		tqc->dataRingSize   = cpu_to_le32(tq->data_ring.size);
+		tqc->compRingSize   = cpu_to_le32(tq->comp_ring.size);
+		tqc->ddLen          = cpu_to_le32(
+					sizeof(struct vmxnet3_tx_buf_info) *
+					tqc->txRingSize);
+		tqc->intrIdx        = tq->comp_ring.intr_idx;
+	}
 
 	/* rx queue settings */
-	devRead->misc.numRxQueues = 1;
-	rqc = &adapter->rqd_start->conf;
-	rqc->rxRingBasePA[0] = cpu_to_le64(adapter->rx_queue.rx_ring[0].basePA);
-	rqc->rxRingBasePA[1] = cpu_to_le64(adapter->rx_queue.rx_ring[1].basePA);
-	rqc->compRingBasePA  = cpu_to_le64(adapter->rx_queue.comp_ring.basePA);
-	rqc->ddPA            = cpu_to_le64(virt_to_phys(
-						adapter->rx_queue.buf_info));
-	rqc->rxRingSize[0]   = cpu_to_le32(adapter->rx_queue.rx_ring[0].size);
-	rqc->rxRingSize[1]   = cpu_to_le32(adapter->rx_queue.rx_ring[1].size);
-	rqc->compRingSize    = cpu_to_le32(adapter->rx_queue.comp_ring.size);
-	rqc->ddLen           = cpu_to_le32(sizeof(struct vmxnet3_rx_buf_info) *
-			       (rqc->rxRingSize[0] + rqc->rxRingSize[1]));
-	rqc->intrIdx         = adapter->rx_queue.comp_ring.intr_idx;
+	devRead->misc.numRxQueues = adapter->num_rx_queues;
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct vmxnet3_rx_queue	*rq = &adapter->rx_queue[i];
+		rqc = &adapter->rqd_start[i].conf;
+		rqc->rxRingBasePA[0] = cpu_to_le64(rq->rx_ring[0].basePA);
+		rqc->rxRingBasePA[1] = cpu_to_le64(rq->rx_ring[1].basePA);
+		rqc->compRingBasePA  = cpu_to_le64(rq->comp_ring.basePA);
+		rqc->ddPA            = cpu_to_le64(virt_to_phys(
+							rq->buf_info));
+		rqc->rxRingSize[0]   = cpu_to_le32(rq->rx_ring[0].size);
+		rqc->rxRingSize[1]   = cpu_to_le32(rq->rx_ring[1].size);
+		rqc->compRingSize    = cpu_to_le32(rq->comp_ring.size);
+		rqc->ddLen           = cpu_to_le32(
+					sizeof(struct vmxnet3_rx_buf_info) *
+					(rqc->rxRingSize[0] +
+					 rqc->rxRingSize[1]));
+		rqc->intrIdx         = rq->comp_ring.intr_idx;
+	}
+
+#ifdef VMXNET3_RSS
+	memset(adapter->rss_conf, 0, sizeof(*adapter->rss_conf));
+
+	if (adapter->rss) {
+		struct UPT1_RSSConf *rssConf = adapter->rss_conf;
+		devRead->misc.uptFeatures |= UPT1_F_RSS;
+		devRead->misc.numRxQueues = adapter->num_rx_queues;
+		rssConf->hashType = UPT1_RSS_HASH_TYPE_TCP_IPV4 |
+				    UPT1_RSS_HASH_TYPE_IPV4 |
+				    UPT1_RSS_HASH_TYPE_TCP_IPV6 |
+				    UPT1_RSS_HASH_TYPE_IPV6;
+		rssConf->hashFunc = UPT1_RSS_HASH_FUNC_TOEPLITZ;
+		rssConf->hashKeySize = UPT1_RSS_MAX_KEY_SIZE;
+		rssConf->indTableSize = VMXNET3_RSS_IND_TABLE_SIZE;
+		get_random_bytes(&rssConf->hashKey[0], rssConf->hashKeySize);
+		for (i = 0; i < rssConf->indTableSize; i++)
+			rssConf->indTable[i] = i % adapter->num_rx_queues;
+
+		devRead->rssConfDesc.confVer = 1;
+		devRead->rssConfDesc.confLen = sizeof(*rssConf);
+		devRead->rssConfDesc.confPA  = virt_to_phys(rssConf);
+	}
+
+#endif /* VMXNET3_RSS */
 
 	/* intr settings */
 	devRead->intrConf.autoMask = adapter->intr.mask_mode ==
@@ -1829,18 +2175,18 @@ vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter)
 int
 vmxnet3_activate_dev(struct vmxnet3_adapter *adapter)
 {
-	int err;
+	int err, i;
 	u32 ret;
 
-	dev_dbg(&adapter->netdev->dev,
-		"%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes"
-		" %u %u %u\n", adapter->netdev->name, adapter->skb_buf_size,
-		adapter->rx_buf_per_pkt, adapter->tx_queue.tx_ring.size,
-		adapter->rx_queue.rx_ring[0].size,
-		adapter->rx_queue.rx_ring[1].size);
-
-	vmxnet3_tq_init(&adapter->tx_queue, adapter);
-	err = vmxnet3_rq_init(&adapter->rx_queue, adapter);
+	dev_dbg(&adapter->netdev->dev, "%s: skb_buf_size %d, rx_buf_per_pkt %d,"
+		" ring sizes %u %u %u\n", adapter->netdev->name,
+		adapter->skb_buf_size, adapter->rx_buf_per_pkt,
+		adapter->tx_queue[0].tx_ring.size,
+		adapter->rx_queue[0].rx_ring[0].size,
+		adapter->rx_queue[0].rx_ring[1].size);
+
+	vmxnet3_tq_init_all(adapter);
+	err = vmxnet3_rq_init_all(adapter);
 	if (err) {
 		printk(KERN_ERR "Failed to init rx queue for %s: error %d\n",
 		       adapter->netdev->name, err);
@@ -1870,10 +2216,15 @@ vmxnet3_activate_dev(struct vmxnet3_adapter *adapter)
 		err = -EINVAL;
 		goto activate_err;
 	}
-	VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_RXPROD,
-			       adapter->rx_queue.rx_ring[0].next2fill);
-	VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_RXPROD2,
-			       adapter->rx_queue.rx_ring[1].next2fill);
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		VMXNET3_WRITE_BAR0_REG(adapter,
+				VMXNET3_REG_RXPROD + i * VMXNET3_REG_ALIGN,
+				adapter->rx_queue[i].rx_ring[0].next2fill);
+		VMXNET3_WRITE_BAR0_REG(adapter, (VMXNET3_REG_RXPROD2 +
+				(i * VMXNET3_REG_ALIGN)),
+				adapter->rx_queue[i].rx_ring[1].next2fill);
+	}
 
 	/* Apply the rx filter settins last. */
 	vmxnet3_set_mc(adapter->netdev);
@@ -1883,8 +2234,8 @@ vmxnet3_activate_dev(struct vmxnet3_adapter *adapter)
 	 * tx queue if the link is up.
 	 */
 	vmxnet3_check_link(adapter, true);
-
-	napi_enable(&adapter->napi);
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		napi_enable(&adapter->rx_queue[i].napi);
 	vmxnet3_enable_all_intrs(adapter);
 	clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
 	return 0;
@@ -1896,7 +2247,7 @@ activate_err:
 irq_err:
 rq_err:
 	/* free up buffers we allocated */
-	vmxnet3_rq_cleanup(&adapter->rx_queue, adapter);
+	vmxnet3_rq_cleanup_all(adapter);
 	return err;
 }
 
@@ -1911,6 +2262,7 @@ vmxnet3_reset_dev(struct vmxnet3_adapter *adapter)
 int
 vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter)
 {
+	int i;
 	if (test_and_set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state))
 		return 0;
 
@@ -1919,13 +2271,14 @@ vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter)
 			       VMXNET3_CMD_QUIESCE_DEV);
 	vmxnet3_disable_all_intrs(adapter);
 
-	napi_disable(&adapter->napi);
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		napi_disable(&adapter->rx_queue[i].napi);
 	netif_tx_disable(adapter->netdev);
 	adapter->link_speed = 0;
 	netif_carrier_off(adapter->netdev);
 
-	vmxnet3_tq_cleanup(&adapter->tx_queue, adapter);
-	vmxnet3_rq_cleanup(&adapter->rx_queue, adapter);
+	vmxnet3_tq_cleanup_all(adapter);
+	vmxnet3_rq_cleanup_all(adapter);
 	vmxnet3_free_irqs(adapter);
 	return 0;
 }
@@ -2047,7 +2400,9 @@ vmxnet3_free_pci_resources(struct vmxnet3_adapter *adapter)
 static void
 vmxnet3_adjust_rx_ring_size(struct vmxnet3_adapter *adapter)
 {
-	size_t sz;
+	size_t sz, i, ring0_size, ring1_size, comp_size;
+	struct vmxnet3_rx_queue	*rq = &adapter->rx_queue[0];
+
 
 	if (adapter->netdev->mtu <= VMXNET3_MAX_SKB_BUF_SIZE -
 				    VMXNET3_MAX_ETH_HDR_SIZE) {
@@ -2069,11 +2424,19 @@ vmxnet3_adjust_rx_ring_size(struct vmxnet3_adapter *adapter)
 	 * rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN
 	 */
 	sz = adapter->rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN;
-	adapter->rx_queue.rx_ring[0].size = (adapter->rx_queue.rx_ring[0].size +
-					     sz - 1) / sz * sz;
-	adapter->rx_queue.rx_ring[0].size = min_t(u32,
-					    adapter->rx_queue.rx_ring[0].size,
-					    VMXNET3_RX_RING_MAX_SIZE / sz * sz);
+	ring0_size = adapter->rx_queue[0].rx_ring[0].size;
+	ring0_size = (ring0_size + sz - 1) / sz * sz;
+	ring0_size = min_t(u32, rq->rx_ring[0].size, VMXNET3_RX_RING_MAX_SIZE /
+			   sz * sz);
+	ring1_size = adapter->rx_queue[0].rx_ring[1].size;
+	comp_size = ring0_size + ring1_size;
+
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		rq = &adapter->rx_queue[i];
+		rq->rx_ring[0].size = ring0_size;
+		rq->rx_ring[1].size = ring1_size;
+		rq->comp_ring.size = comp_size;
+	}
 }
 
 
@@ -2081,29 +2444,53 @@ int
 vmxnet3_create_queues(struct vmxnet3_adapter *adapter, u32 tx_ring_size,
 		      u32 rx_ring_size, u32 rx_ring2_size)
 {
-	int err;
-
-	adapter->tx_queue.tx_ring.size   = tx_ring_size;
-	adapter->tx_queue.data_ring.size = tx_ring_size;
-	adapter->tx_queue.comp_ring.size = tx_ring_size;
-	adapter->tx_queue.shared = &adapter->tqd_start->ctrl;
-	adapter->tx_queue.stopped = true;
-	err = vmxnet3_tq_create(&adapter->tx_queue, adapter);
-	if (err)
-		return err;
+	int err = 0, i;
+
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		struct vmxnet3_tx_queue	*tq = &adapter->tx_queue[i];
+		tq->tx_ring.size   = tx_ring_size;
+		tq->data_ring.size = tx_ring_size;
+		tq->comp_ring.size = tx_ring_size;
+		tq->shared = &adapter->tqd_start[i].ctrl;
+		tq->stopped = true;
+		tq->adapter = adapter;
+		tq->qid = i;
+		err = vmxnet3_tq_create(tq, adapter);
+		/*
+		 * Too late to change num_tx_queues. We cannot do away with
+		 * lesser number of queues than what we asked for
+		 */
+		if (err)
+			goto queue_err;
+	}
 
-	adapter->rx_queue.rx_ring[0].size = rx_ring_size;
-	adapter->rx_queue.rx_ring[1].size = rx_ring2_size;
+	adapter->rx_queue[0].rx_ring[0].size = rx_ring_size;
+	adapter->rx_queue[0].rx_ring[1].size = rx_ring2_size;
 	vmxnet3_adjust_rx_ring_size(adapter);
-	adapter->rx_queue.comp_ring.size  = adapter->rx_queue.rx_ring[0].size +
-					    adapter->rx_queue.rx_ring[1].size;
-	adapter->rx_queue.qid  = 0;
-	adapter->rx_queue.qid2 = 1;
-	adapter->rx_queue.shared = &adapter->rqd_start->ctrl;
-	err = vmxnet3_rq_create(&adapter->rx_queue, adapter);
-	if (err)
-		vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
-
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		struct vmxnet3_rx_queue *rq = &adapter->rx_queue[i];
+		/* qid and qid2 for rx queues will be assigned later when num
+		 * of rx queues is finalized after allocating intrs */
+		rq->shared = &adapter->rqd_start[i].ctrl;
+		rq->adapter = adapter;
+		err = vmxnet3_rq_create(rq, adapter);
+		if (err) {
+			if (i == 0) {
+				printk(KERN_ERR "Could not allocate any rx"
+				       "queues. Aborting.\n");
+				goto queue_err;
+			} else {
+				printk(KERN_INFO "Number of rx queues changed "
+				       "to : %d.\n", i);
+				adapter->num_rx_queues = i;
+				err = 0;
+				break;
+			}
+		}
+	}
+	return err;
+queue_err:
+	vmxnet3_tq_destroy_all(adapter);
 	return err;
 }
 
@@ -2111,11 +2498,12 @@ static int
 vmxnet3_open(struct net_device *netdev)
 {
 	struct vmxnet3_adapter *adapter;
-	int err;
+	int err, i;
 
 	adapter = netdev_priv(netdev);
 
-	spin_lock_init(&adapter->tx_queue.tx_lock);
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		spin_lock_init(&adapter->tx_queue[i].tx_lock);
 
 	err = vmxnet3_create_queues(adapter, VMXNET3_DEF_TX_RING_SIZE,
 				    VMXNET3_DEF_RX_RING_SIZE,
@@ -2130,8 +2518,8 @@ vmxnet3_open(struct net_device *netdev)
 	return 0;
 
 activate_err:
-	vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
-	vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
+	vmxnet3_rq_destroy_all(adapter);
+	vmxnet3_tq_destroy_all(adapter);
 queue_err:
 	return err;
 }
@@ -2151,8 +2539,8 @@ vmxnet3_close(struct net_device *netdev)
 
 	vmxnet3_quiesce_dev(adapter);
 
-	vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
-	vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
+	vmxnet3_rq_destroy_all(adapter);
+	vmxnet3_tq_destroy_all(adapter);
 
 	clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state);
 
@@ -2164,6 +2552,8 @@ vmxnet3_close(struct net_device *netdev)
 void
 vmxnet3_force_close(struct vmxnet3_adapter *adapter)
 {
+	int i;
+
 	/*
 	 * we must clear VMXNET3_STATE_BIT_RESETTING, otherwise
 	 * vmxnet3_close() will deadlock.
@@ -2171,7 +2561,8 @@ vmxnet3_force_close(struct vmxnet3_adapter *adapter)
 	BUG_ON(test_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state));
 
 	/* we need to enable NAPI, otherwise dev_close will deadlock */
-	napi_enable(&adapter->napi);
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		napi_enable(&adapter->rx_queue[i].napi);
 	dev_close(adapter->netdev);
 }
 
@@ -2202,14 +2593,11 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
 		vmxnet3_reset_dev(adapter);
 
 		/* we need to re-create the rx queue based on the new mtu */
-		vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
+		vmxnet3_rq_destroy_all(adapter);
 		vmxnet3_adjust_rx_ring_size(adapter);
-		adapter->rx_queue.comp_ring.size  =
-					adapter->rx_queue.rx_ring[0].size +
-					adapter->rx_queue.rx_ring[1].size;
-		err = vmxnet3_rq_create(&adapter->rx_queue, adapter);
+		err = vmxnet3_rq_create_all(adapter);
 		if (err) {
-			printk(KERN_ERR "%s: failed to re-create rx queue,"
+			printk(KERN_ERR "%s: failed to re-create rx queues,"
 				" error %d. Closing it.\n", netdev->name, err);
 			goto out;
 		}
@@ -2274,6 +2662,55 @@ vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac)
 	mac[5] = (tmp >> 8) & 0xff;
 }
 
+#ifdef CONFIG_PCI_MSI
+
+/*
+ * Enable MSIx vectors.
+ * Returns :
+ *	0 on successful enabling of required vectors,
+ *	VMXNET3_LINUX_MIN_MSIX_VECT when only minumum number of vectors required
+ *	 could be enabled.
+ *	number of vectors which can be enabled otherwise (this number is smaller
+ *	 than VMXNET3_LINUX_MIN_MSIX_VECT)
+ */
+
+static int
+vmxnet3_acquire_msix_vectors(struct vmxnet3_adapter *adapter,
+			     int vectors)
+{
+	int err = 0, vector_threshold;
+	vector_threshold = VMXNET3_LINUX_MIN_MSIX_VECT;
+
+	while (vectors >= vector_threshold) {
+		err = pci_enable_msix(adapter->pdev, adapter->intr.msix_entries,
+				      vectors);
+		if (!err) {
+			adapter->intr.num_intrs = vectors;
+			return 0;
+		} else if (err < 0) {
+			printk(KERN_ERR "Failed to enable MSI-X for %s, error"
+			       " %d\n",	adapter->netdev->name, err);
+			vectors = 0;
+		} else if (err < vector_threshold) {
+			break;
+		} else {
+			/* If fails to enable required number of MSI-x vectors
+			 * try enabling 3 of them. One each for rx, tx and event
+			 */
+			vectors = vector_threshold;
+			printk(KERN_ERR "Failed to enable %d MSI-X for %s, try"
+			       " %d instead\n", vectors, adapter->netdev->name,
+			       vector_threshold);
+		}
+	}
+
+	printk(KERN_INFO "Number of MSI-X interrupts which can be allocatedi"
+	       " are lower than min threshold required.\n");
+	return err;
+}
+
+
+#endif /* CONFIG_PCI_MSI */
 
 static void
 vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)
@@ -2293,16 +2730,47 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)
 
 #ifdef CONFIG_PCI_MSI
 	if (adapter->intr.type == VMXNET3_IT_MSIX) {
-		int err;
-
-		adapter->intr.msix_entries[0].entry = 0;
-		err = pci_enable_msix(adapter->pdev, adapter->intr.msix_entries,
-				      VMXNET3_LINUX_MAX_MSIX_VECT);
-		if (!err) {
-			adapter->intr.num_intrs = 1;
-			adapter->intr.type = VMXNET3_IT_MSIX;
+		int vector, err = 0;
+
+		adapter->intr.num_intrs = (adapter->share_intr ==
+					   VMXNET3_INTR_TXSHARE) ? 1 :
+					   adapter->num_tx_queues;
+		adapter->intr.num_intrs += (adapter->share_intr ==
+					   VMXNET3_INTR_BUDDYSHARE) ? 0 :
+					   adapter->num_rx_queues;
+		adapter->intr.num_intrs += 1;		/* for link event */
+
+		adapter->intr.num_intrs = (adapter->intr.num_intrs >
+					   VMXNET3_LINUX_MIN_MSIX_VECT
+					   ? adapter->intr.num_intrs :
+					   VMXNET3_LINUX_MIN_MSIX_VECT);
+
+		for (vector = 0; vector < adapter->intr.num_intrs; vector++)
+			adapter->intr.msix_entries[vector].entry = vector;
+
+		err = vmxnet3_acquire_msix_vectors(adapter,
+						   adapter->intr.num_intrs);
+		/* If we cannot allocate one MSIx vector per queue
+		 * then limit the number of rx queues to 1
+		 */
+		if (err == VMXNET3_LINUX_MIN_MSIX_VECT) {
+			if (adapter->share_intr != VMXNET3_INTR_BUDDYSHARE
+			    || adapter->num_rx_queues != 2) {
+				adapter->share_intr = VMXNET3_INTR_TXSHARE;
+				printk(KERN_ERR "Number of rx queues : 1\n");
+				adapter->num_rx_queues = 1;
+				adapter->intr.num_intrs =
+						VMXNET3_LINUX_MIN_MSIX_VECT;
+			}
 			return;
 		}
+		if (!err)
+			return;
+
+		/* If we cannot allocate MSIx vectors use only one rx queue */
+		printk(KERN_INFO "Failed to enable MSI-X for %s, error %d."
+		       "#rx queues : 1, try MSI\n", adapter->netdev->name, err);
+
 		adapter->intr.type = VMXNET3_IT_MSI;
 	}
 
@@ -2310,12 +2778,15 @@ vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)
 		int err;
 		err = pci_enable_msi(adapter->pdev);
 		if (!err) {
+			adapter->num_rx_queues = 1;
 			adapter->intr.num_intrs = 1;
 			return;
 		}
 	}
 #endif /* CONFIG_PCI_MSI */
 
+	adapter->num_rx_queues = 1;
+	printk(KERN_INFO "Using INTx interrupt, #Rx queues: 1.\n");
 	adapter->intr.type = VMXNET3_IT_INTX;
 
 	/* INT-X related setting */
@@ -2343,6 +2814,7 @@ vmxnet3_tx_timeout(struct net_device *netdev)
 
 	printk(KERN_ERR "%s: tx hang\n", adapter->netdev->name);
 	schedule_work(&adapter->work);
+	netif_wake_queue(adapter->netdev);
 }
 
 
@@ -2399,8 +2871,29 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 	struct net_device *netdev;
 	struct vmxnet3_adapter *adapter;
 	u8 mac[ETH_ALEN];
+	int size;
+	int num_tx_queues;
+	int num_rx_queues;
+
+#ifdef VMXNET3_RSS
+	if (enable_mq)
+		num_rx_queues = min(VMXNET3_DEVICE_MAX_RX_QUEUES,
+				    (int)num_online_cpus());
+	else
+#endif
+		num_rx_queues = 1;
+
+	if (enable_mq)
+		num_tx_queues = min(VMXNET3_DEVICE_MAX_TX_QUEUES,
+				    (int)num_online_cpus());
+	else
+		num_tx_queues = 1;
+
+	netdev = alloc_etherdev_mq(sizeof(struct vmxnet3_adapter),
+				   max(num_tx_queues, num_rx_queues));
+	printk(KERN_INFO "# of Tx queues : %d, # of Rx queues : %d\n",
+	       num_tx_queues, num_rx_queues);
 
-	netdev = alloc_etherdev(sizeof(struct vmxnet3_adapter));
 	if (!netdev) {
 		printk(KERN_ERR "Failed to alloc ethernet device for adapter "
 			"%s\n",	pci_name(pdev));
@@ -2422,9 +2915,12 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 		goto err_alloc_shared;
 	}
 
-	adapter->tqd_start = pci_alloc_consistent(adapter->pdev,
-			     sizeof(struct Vmxnet3_TxQueueDesc) +
-			     sizeof(struct Vmxnet3_RxQueueDesc),
+	adapter->num_rx_queues = num_rx_queues;
+	adapter->num_tx_queues = num_tx_queues;
+
+	size = sizeof(struct Vmxnet3_TxQueueDesc) * adapter->num_tx_queues;
+	size += sizeof(struct Vmxnet3_RxQueueDesc) * adapter->num_rx_queues;
+	adapter->tqd_start = pci_alloc_consistent(adapter->pdev, size,
 			     &adapter->queue_desc_pa);
 
 	if (!adapter->tqd_start) {
@@ -2433,8 +2929,8 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 		err = -ENOMEM;
 		goto err_alloc_queue_desc;
 	}
-	adapter->rqd_start = (struct Vmxnet3_RxQueueDesc *)(adapter->tqd_start
-							    + 1);
+	adapter->rqd_start = (struct Vmxnet3_RxQueueDesc *)(adapter->tqd_start +
+							adapter->num_tx_queues);
 
 	adapter->pm_conf = kmalloc(sizeof(struct Vmxnet3_PMConf), GFP_KERNEL);
 	if (adapter->pm_conf == NULL) {
@@ -2444,6 +2940,17 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 		goto err_alloc_pm;
 	}
 
+#ifdef VMXNET3_RSS
+
+	adapter->rss_conf = kmalloc(sizeof(struct UPT1_RSSConf), GFP_KERNEL);
+	if (adapter->rss_conf == NULL) {
+		printk(KERN_ERR "Failed to allocate memory for %s\n",
+		       pci_name(pdev));
+		err = -ENOMEM;
+		goto err_alloc_rss;
+	}
+#endif /* VMXNET3_RSS */
+
 	err = vmxnet3_alloc_pci_resources(adapter, &dma64);
 	if (err < 0)
 		goto err_alloc_pci;
@@ -2471,18 +2978,48 @@ vmxnet3_probe_device(struct pci_dev *pdev,
 	vmxnet3_declare_features(adapter, dma64);
 
 	adapter->dev_number = atomic_read(&devices_found);
+
+	 adapter->share_intr = irq_share_mode;
+	if (adapter->share_intr == VMXNET3_INTR_BUDDYSHARE &&
+	    adapter->num_tx_queues != adapter->num_rx_queues)
+		adapter->share_intr = VMXNET3_INTR_DONTSHARE;
+
 	vmxnet3_alloc_intr_resources(adapter);
 
+#ifdef VMXNET3_RSS
+	if (adapter->num_rx_queues > 1 &&
+	    adapter->intr.type == VMXNET3_IT_MSIX) {
+		adapter->rss = true;
+		printk(KERN_INFO "RSS is enabled.\n");
+	} else {
+		adapter->rss = false;
+	}
+#endif
+
 	vmxnet3_read_mac_addr(adapter, mac);
 	memcpy(netdev->dev_addr,  mac, netdev->addr_len);
 
 	netdev->netdev_ops = &vmxnet3_netdev_ops;
-	netdev->watchdog_timeo = 5 * HZ;
 	vmxnet3_set_ethtool_ops(netdev);
+	netdev->watchdog_timeo = 5 * HZ;
 
 	INIT_WORK(&adapter->work, vmxnet3_reset_work);
 
-	netif_napi_add(netdev, &adapter->napi, vmxnet3_poll, 64);
+	if (adapter->intr.type == VMXNET3_IT_MSIX) {
+		int i;
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			netif_napi_add(adapter->netdev,
+				       &adapter->rx_queue[i].napi,
+				       vmxnet3_poll_rx_only, 64);
+		}
+	} else {
+		netif_napi_add(adapter->netdev, &adapter->rx_queue[0].napi,
+			       vmxnet3_poll, 64);
+	}
+
+	netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
+	netif_set_real_num_rx_queues(adapter->netdev, adapter->num_rx_queues);
+
 	SET_NETDEV_DEV(netdev, &pdev->dev);
 	err = register_netdev(netdev);
 
@@ -2502,11 +3039,14 @@ err_register:
 err_ver:
 	vmxnet3_free_pci_resources(adapter);
 err_alloc_pci:
+#ifdef VMXNET3_RSS
+	kfree(adapter->rss_conf);
+err_alloc_rss:
+#endif
 	kfree(adapter->pm_conf);
 err_alloc_pm:
-	pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_TxQueueDesc) +
-			    sizeof(struct Vmxnet3_RxQueueDesc),
-			    adapter->tqd_start, adapter->queue_desc_pa);
+	pci_free_consistent(adapter->pdev, size, adapter->tqd_start,
+			    adapter->queue_desc_pa);
 err_alloc_queue_desc:
 	pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared),
 			    adapter->shared, adapter->shared_pa);
@@ -2522,17 +3062,32 @@ vmxnet3_remove_device(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	int size = 0;
+	int num_rx_queues;
 
-	flush_scheduled_work();
+#ifdef VMXNET3_RSS
+	if (enable_mq)
+		num_rx_queues = min(VMXNET3_DEVICE_MAX_RX_QUEUES,
+				    (int)num_online_cpus());
+	else
+#endif
+		num_rx_queues = 1;
+
+	cancel_work_sync(&adapter->work);
 
 	unregister_netdev(netdev);
 
 	vmxnet3_free_intr_resources(adapter);
 	vmxnet3_free_pci_resources(adapter);
+#ifdef VMXNET3_RSS
+	kfree(adapter->rss_conf);
+#endif
 	kfree(adapter->pm_conf);
-	pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_TxQueueDesc) +
-			    sizeof(struct Vmxnet3_RxQueueDesc),
-			    adapter->tqd_start, adapter->queue_desc_pa);
+
+	size = sizeof(struct Vmxnet3_TxQueueDesc) * adapter->num_tx_queues;
+	size += sizeof(struct Vmxnet3_RxQueueDesc) * num_rx_queues;
+	pci_free_consistent(adapter->pdev, size, adapter->tqd_start,
+			    adapter->queue_desc_pa);
 	pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared),
 			    adapter->shared, adapter->shared_pa);
 	free_netdev(netdev);
@@ -2563,7 +3118,7 @@ vmxnet3_suspend(struct device *device)
 	vmxnet3_free_intr_resources(adapter);
 
 	netif_device_detach(netdev);
-	netif_stop_queue(netdev);
+	netif_tx_stop_all_queues(netdev);
 
 	/* Create wake-up filters. */
 	pmConf = adapter->pm_conf;
diff --git a/drivers/net/vmxnet3/vmxnet3_ethtool.c b/drivers/net/vmxnet3/vmxnet3_ethtool.c
index b79070bcc92..8e17fc8a7fe 100644
--- a/drivers/net/vmxnet3/vmxnet3_ethtool.c
+++ b/drivers/net/vmxnet3/vmxnet3_ethtool.c
@@ -151,44 +151,42 @@ vmxnet3_get_stats(struct net_device *netdev)
 	struct UPT1_TxStats *devTxStats;
 	struct UPT1_RxStats *devRxStats;
 	struct net_device_stats *net_stats = &netdev->stats;
+	int i;
 
 	adapter = netdev_priv(netdev);
 
 	/* Collect the dev stats into the shared area */
 	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS);
 
-	/* Assuming that we have a single queue device */
-	devTxStats = &adapter->tqd_start->stats;
-	devRxStats = &adapter->rqd_start->stats;
-
-	/* Get access to the driver stats per queue */
-	drvTxStats = &adapter->tx_queue.stats;
-	drvRxStats = &adapter->rx_queue.stats;
-
 	memset(net_stats, 0, sizeof(*net_stats));
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		devTxStats = &adapter->tqd_start[i].stats;
+		drvTxStats = &adapter->tx_queue[i].stats;
+		net_stats->tx_packets += devTxStats->ucastPktsTxOK +
+					devTxStats->mcastPktsTxOK +
+					devTxStats->bcastPktsTxOK;
+		net_stats->tx_bytes += devTxStats->ucastBytesTxOK +
+				      devTxStats->mcastBytesTxOK +
+				      devTxStats->bcastBytesTxOK;
+		net_stats->tx_errors += devTxStats->pktsTxError;
+		net_stats->tx_dropped += drvTxStats->drop_total;
+	}
 
-	net_stats->rx_packets = devRxStats->ucastPktsRxOK +
-				devRxStats->mcastPktsRxOK +
-				devRxStats->bcastPktsRxOK;
-
-	net_stats->tx_packets = devTxStats->ucastPktsTxOK +
-				devTxStats->mcastPktsTxOK +
-				devTxStats->bcastPktsTxOK;
-
-	net_stats->rx_bytes = devRxStats->ucastBytesRxOK +
-			      devRxStats->mcastBytesRxOK +
-			      devRxStats->bcastBytesRxOK;
-
-	net_stats->tx_bytes = devTxStats->ucastBytesTxOK +
-			      devTxStats->mcastBytesTxOK +
-			      devTxStats->bcastBytesTxOK;
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		devRxStats = &adapter->rqd_start[i].stats;
+		drvRxStats = &adapter->rx_queue[i].stats;
+		net_stats->rx_packets += devRxStats->ucastPktsRxOK +
+					devRxStats->mcastPktsRxOK +
+					devRxStats->bcastPktsRxOK;
 
-	net_stats->rx_errors = devRxStats->pktsRxError;
-	net_stats->tx_errors = devTxStats->pktsTxError;
-	net_stats->rx_dropped = drvRxStats->drop_total;
-	net_stats->tx_dropped = drvTxStats->drop_total;
-	net_stats->multicast =  devRxStats->mcastPktsRxOK;
+		net_stats->rx_bytes += devRxStats->ucastBytesRxOK +
+				      devRxStats->mcastBytesRxOK +
+				      devRxStats->bcastBytesRxOK;
 
+		net_stats->rx_errors += devRxStats->pktsRxError;
+		net_stats->rx_dropped += drvRxStats->drop_total;
+		net_stats->multicast +=  devRxStats->mcastPktsRxOK;
+	}
 	return net_stats;
 }
 
@@ -307,24 +305,26 @@ vmxnet3_get_ethtool_stats(struct net_device *netdev,
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
 	u8 *base;
 	int i;
+	int j = 0;
 
 	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS);
 
 	/* this does assume each counter is 64-bit wide */
+/* TODO change this for multiple queues */
 
-	base = (u8 *)&adapter->tqd_start->stats;
+	base = (u8 *)&adapter->tqd_start[j].stats;
 	for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++)
 		*buf++ = *(u64 *)(base + vmxnet3_tq_dev_stats[i].offset);
 
-	base = (u8 *)&adapter->tx_queue.stats;
+	base = (u8 *)&adapter->tx_queue[j].stats;
 	for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++)
 		*buf++ = *(u64 *)(base + vmxnet3_tq_driver_stats[i].offset);
 
-	base = (u8 *)&adapter->rqd_start->stats;
+	base = (u8 *)&adapter->rqd_start[j].stats;
 	for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++)
 		*buf++ = *(u64 *)(base + vmxnet3_rq_dev_stats[i].offset);
 
-	base = (u8 *)&adapter->rx_queue.stats;
+	base = (u8 *)&adapter->rx_queue[j].stats;
 	for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++)
 		*buf++ = *(u64 *)(base + vmxnet3_rq_driver_stats[i].offset);
 
@@ -339,6 +339,7 @@ vmxnet3_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p)
 {
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
 	u32 *buf = p;
+	int i = 0;
 
 	memset(p, 0, vmxnet3_get_regs_len(netdev));
 
@@ -347,28 +348,29 @@ vmxnet3_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p)
 	/* Update vmxnet3_get_regs_len if we want to dump more registers */
 
 	/* make each ring use multiple of 16 bytes */
-	buf[0] = adapter->tx_queue.tx_ring.next2fill;
-	buf[1] = adapter->tx_queue.tx_ring.next2comp;
-	buf[2] = adapter->tx_queue.tx_ring.gen;
+/* TODO change this for multiple queues */
+	buf[0] = adapter->tx_queue[i].tx_ring.next2fill;
+	buf[1] = adapter->tx_queue[i].tx_ring.next2comp;
+	buf[2] = adapter->tx_queue[i].tx_ring.gen;
 	buf[3] = 0;
 
-	buf[4] = adapter->tx_queue.comp_ring.next2proc;
-	buf[5] = adapter->tx_queue.comp_ring.gen;
-	buf[6] = adapter->tx_queue.stopped;
+	buf[4] = adapter->tx_queue[i].comp_ring.next2proc;
+	buf[5] = adapter->tx_queue[i].comp_ring.gen;
+	buf[6] = adapter->tx_queue[i].stopped;
 	buf[7] = 0;
 
-	buf[8] = adapter->rx_queue.rx_ring[0].next2fill;
-	buf[9] = adapter->rx_queue.rx_ring[0].next2comp;
-	buf[10] = adapter->rx_queue.rx_ring[0].gen;
+	buf[8] = adapter->rx_queue[i].rx_ring[0].next2fill;
+	buf[9] = adapter->rx_queue[i].rx_ring[0].next2comp;
+	buf[10] = adapter->rx_queue[i].rx_ring[0].gen;
 	buf[11] = 0;
 
-	buf[12] = adapter->rx_queue.rx_ring[1].next2fill;
-	buf[13] = adapter->rx_queue.rx_ring[1].next2comp;
-	buf[14] = adapter->rx_queue.rx_ring[1].gen;
+	buf[12] = adapter->rx_queue[i].rx_ring[1].next2fill;
+	buf[13] = adapter->rx_queue[i].rx_ring[1].next2comp;
+	buf[14] = adapter->rx_queue[i].rx_ring[1].gen;
 	buf[15] = 0;
 
-	buf[16] = adapter->rx_queue.comp_ring.next2proc;
-	buf[17] = adapter->rx_queue.comp_ring.gen;
+	buf[16] = adapter->rx_queue[i].comp_ring.next2proc;
+	buf[17] = adapter->rx_queue[i].comp_ring.gen;
 	buf[18] = 0;
 	buf[19] = 0;
 }
@@ -435,8 +437,10 @@ vmxnet3_get_ringparam(struct net_device *netdev,
 	param->rx_mini_max_pending = 0;
 	param->rx_jumbo_max_pending = 0;
 
-	param->rx_pending = adapter->rx_queue.rx_ring[0].size;
-	param->tx_pending = adapter->tx_queue.tx_ring.size;
+	param->rx_pending = adapter->rx_queue[0].rx_ring[0].size *
+			    adapter->num_rx_queues;
+	param->tx_pending = adapter->tx_queue[0].tx_ring.size *
+			    adapter->num_tx_queues;
 	param->rx_mini_pending = 0;
 	param->rx_jumbo_pending = 0;
 }
@@ -480,8 +484,8 @@ vmxnet3_set_ringparam(struct net_device *netdev,
 							   sz) != 0)
 		return -EINVAL;
 
-	if (new_tx_ring_size == adapter->tx_queue.tx_ring.size &&
-			new_rx_ring_size == adapter->rx_queue.rx_ring[0].size) {
+	if (new_tx_ring_size == adapter->tx_queue[0].tx_ring.size &&
+	    new_rx_ring_size == adapter->rx_queue[0].rx_ring[0].size) {
 		return 0;
 	}
 
@@ -498,11 +502,12 @@ vmxnet3_set_ringparam(struct net_device *netdev,
 
 		/* recreate the rx queue and the tx queue based on the
 		 * new sizes */
-		vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
-		vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
+		vmxnet3_tq_destroy_all(adapter);
+		vmxnet3_rq_destroy_all(adapter);
 
 		err = vmxnet3_create_queues(adapter, new_tx_ring_size,
 			new_rx_ring_size, VMXNET3_DEF_RX_RING_SIZE);
+
 		if (err) {
 			/* failed, most likely because of OOM, try default
 			 * size */
@@ -535,6 +540,66 @@ out:
 }
 
 
+static int
+vmxnet3_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *info,
+		  void *rules)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	switch (info->cmd) {
+	case ETHTOOL_GRXRINGS:
+		info->data = adapter->num_rx_queues;
+		return 0;
+	}
+	return -EOPNOTSUPP;
+}
+
+#ifdef VMXNET3_RSS
+static int
+vmxnet3_get_rss_indir(struct net_device *netdev,
+		      struct ethtool_rxfh_indir *p)
+{
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	struct UPT1_RSSConf *rssConf = adapter->rss_conf;
+	unsigned int n = min_t(unsigned int, p->size, rssConf->indTableSize);
+
+	p->size = rssConf->indTableSize;
+	while (n--)
+		p->ring_index[n] = rssConf->indTable[n];
+	return 0;
+
+}
+
+static int
+vmxnet3_set_rss_indir(struct net_device *netdev,
+		      const struct ethtool_rxfh_indir *p)
+{
+	unsigned int i;
+	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+	struct UPT1_RSSConf *rssConf = adapter->rss_conf;
+
+	if (p->size != rssConf->indTableSize)
+		return -EINVAL;
+	for (i = 0; i < rssConf->indTableSize; i++) {
+		/*
+		 * Return with error code if any of the queue indices
+		 * is out of range
+		 */
+		if (p->ring_index[i] < 0 ||
+		    p->ring_index[i] >= adapter->num_rx_queues)
+			return -EINVAL;
+	}
+
+	for (i = 0; i < rssConf->indTableSize; i++)
+		rssConf->indTable[i] = p->ring_index[i];
+
+	VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+			       VMXNET3_CMD_UPDATE_RSSIDT);
+
+	return 0;
+
+}
+#endif
+
 static struct ethtool_ops vmxnet3_ethtool_ops = {
 	.get_settings      = vmxnet3_get_settings,
 	.get_drvinfo       = vmxnet3_get_drvinfo,
@@ -558,6 +623,11 @@ static struct ethtool_ops vmxnet3_ethtool_ops = {
 	.get_ethtool_stats = vmxnet3_get_ethtool_stats,
 	.get_ringparam     = vmxnet3_get_ringparam,
 	.set_ringparam     = vmxnet3_set_ringparam,
+	.get_rxnfc         = vmxnet3_get_rxnfc,
+#ifdef VMXNET3_RSS
+	.get_rxfh_indir    = vmxnet3_get_rss_indir,
+	.set_rxfh_indir    = vmxnet3_set_rss_indir,
+#endif
 };
 
 void vmxnet3_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index edf228843af..7fadeed37f0 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -68,11 +68,15 @@
 /*
  * Version numbers
  */
-#define VMXNET3_DRIVER_VERSION_STRING   "1.0.14.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING   "1.0.16.0-k"
 
 /* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM      0x01000E00
+#define VMXNET3_DRIVER_VERSION_NUM      0x01001000
 
+#if defined(CONFIG_PCI_MSI)
+	/* RSS only makes sense if MSI-X is supported. */
+	#define VMXNET3_RSS
+#endif
 
 /*
  * Capabilities
@@ -218,16 +222,19 @@ struct vmxnet3_tx_ctx {
 };
 
 struct vmxnet3_tx_queue {
+	char			name[IFNAMSIZ+8]; /* To identify interrupt */
+	struct vmxnet3_adapter		*adapter;
 	spinlock_t                      tx_lock;
 	struct vmxnet3_cmd_ring         tx_ring;
-	struct vmxnet3_tx_buf_info     *buf_info;
+	struct vmxnet3_tx_buf_info      *buf_info;
 	struct vmxnet3_tx_data_ring     data_ring;
 	struct vmxnet3_comp_ring        comp_ring;
-	struct Vmxnet3_TxQueueCtrl            *shared;
+	struct Vmxnet3_TxQueueCtrl      *shared;
 	struct vmxnet3_tq_driver_stats  stats;
 	bool                            stopped;
 	int                             num_stop;  /* # of times the queue is
 						    * stopped */
+	int				qid;
 } __attribute__((__aligned__(SMP_CACHE_BYTES)));
 
 enum vmxnet3_rx_buf_type {
@@ -259,6 +266,9 @@ struct vmxnet3_rq_driver_stats {
 };
 
 struct vmxnet3_rx_queue {
+	char			name[IFNAMSIZ + 8]; /* To identify interrupt */
+	struct vmxnet3_adapter	  *adapter;
+	struct napi_struct        napi;
 	struct vmxnet3_cmd_ring   rx_ring[2];
 	struct vmxnet3_comp_ring  comp_ring;
 	struct vmxnet3_rx_ctx     rx_ctx;
@@ -271,7 +281,16 @@ struct vmxnet3_rx_queue {
 	struct vmxnet3_rq_driver_stats  stats;
 } __attribute__((__aligned__(SMP_CACHE_BYTES)));
 
-#define VMXNET3_LINUX_MAX_MSIX_VECT     1
+#define VMXNET3_DEVICE_MAX_TX_QUEUES 8
+#define VMXNET3_DEVICE_MAX_RX_QUEUES 8   /* Keep this value as a power of 2 */
+
+/* Should be less than UPT1_RSS_MAX_IND_TABLE_SIZE */
+#define VMXNET3_RSS_IND_TABLE_SIZE (VMXNET3_DEVICE_MAX_RX_QUEUES * 4)
+
+#define VMXNET3_LINUX_MAX_MSIX_VECT     (VMXNET3_DEVICE_MAX_TX_QUEUES + \
+					 VMXNET3_DEVICE_MAX_RX_QUEUES + 1)
+#define VMXNET3_LINUX_MIN_MSIX_VECT     3    /* 1 for each : tx, rx and event */
+
 
 struct vmxnet3_intr {
 	enum vmxnet3_intr_mask_mode  mask_mode;
@@ -279,27 +298,32 @@ struct vmxnet3_intr {
 	u8  num_intrs;			/* # of intr vectors */
 	u8  event_intr_idx;		/* idx of the intr vector for event */
 	u8  mod_levels[VMXNET3_LINUX_MAX_MSIX_VECT]; /* moderation level */
+	char	event_msi_vector_name[IFNAMSIZ+11];
 #ifdef CONFIG_PCI_MSI
 	struct msix_entry msix_entries[VMXNET3_LINUX_MAX_MSIX_VECT];
 #endif
 };
 
+/* Interrupt sharing schemes, share_intr */
+#define VMXNET3_INTR_BUDDYSHARE 0    /* Corresponding tx,rx queues share irq */
+#define VMXNET3_INTR_TXSHARE 1	     /* All tx queues share one irq */
+#define VMXNET3_INTR_DONTSHARE 2     /* each queue has its own irq */
+
+
 #define VMXNET3_STATE_BIT_RESETTING   0
 #define VMXNET3_STATE_BIT_QUIESCED    1
 struct vmxnet3_adapter {
-	struct vmxnet3_tx_queue         tx_queue;
-	struct vmxnet3_rx_queue         rx_queue;
-	struct napi_struct              napi;
-	struct vlan_group              *vlan_grp;
-
-	struct vmxnet3_intr             intr;
-
-	struct Vmxnet3_DriverShared    *shared;
-	struct Vmxnet3_PMConf          *pm_conf;
-	struct Vmxnet3_TxQueueDesc     *tqd_start;     /* first tx queue desc */
-	struct Vmxnet3_RxQueueDesc     *rqd_start;     /* first rx queue desc */
-	struct net_device              *netdev;
-	struct pci_dev                 *pdev;
+	struct vmxnet3_tx_queue		tx_queue[VMXNET3_DEVICE_MAX_TX_QUEUES];
+	struct vmxnet3_rx_queue		rx_queue[VMXNET3_DEVICE_MAX_RX_QUEUES];
+	struct vlan_group		*vlan_grp;
+	struct vmxnet3_intr		intr;
+	struct Vmxnet3_DriverShared	*shared;
+	struct Vmxnet3_PMConf		*pm_conf;
+	struct Vmxnet3_TxQueueDesc	*tqd_start;     /* all tx queue desc */
+	struct Vmxnet3_RxQueueDesc	*rqd_start;	/* all rx queue desc */
+	struct net_device		*netdev;
+	struct net_device_stats		net_stats;
+	struct pci_dev			*pdev;
 
 	u8			__iomem *hw_addr0; /* for BAR 0 */
 	u8			__iomem *hw_addr1; /* for BAR 1 */
@@ -308,6 +332,12 @@ struct vmxnet3_adapter {
 	bool				rxcsum;
 	bool				lro;
 	bool				jumbo_frame;
+#ifdef VMXNET3_RSS
+	struct UPT1_RSSConf		*rss_conf;
+	bool				rss;
+#endif
+	u32				num_rx_queues;
+	u32				num_tx_queues;
 
 	/* rx buffer related */
 	unsigned			skb_buf_size;
@@ -327,6 +357,7 @@ struct vmxnet3_adapter {
 	unsigned long  state;    /* VMXNET3_STATE_BIT_xxx */
 
 	int dev_number;
+	int share_intr;
 };
 
 #define VMXNET3_WRITE_BAR0_REG(adapter, reg, val)  \
@@ -366,12 +397,10 @@ void
 vmxnet3_reset_dev(struct vmxnet3_adapter *adapter);
 
 void
-vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq,
-		   struct vmxnet3_adapter *adapter);
+vmxnet3_tq_destroy_all(struct vmxnet3_adapter *adapter);
 
 void
-vmxnet3_rq_destroy(struct vmxnet3_rx_queue *rq,
-		   struct vmxnet3_adapter *adapter);
+vmxnet3_rq_destroy_all(struct vmxnet3_adapter *adapter);
 
 int
 vmxnet3_create_queues(struct vmxnet3_adapter *adapter,
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index 409c2e6053d..01c05f53e2f 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -21,100 +21,15 @@
 #include "vxge-config.h"
 #include "vxge-main.h"
 
-static enum vxge_hw_status
-__vxge_hw_fifo_delete(
-	struct __vxge_hw_vpath_handle *vpath_handle);
-
-static struct __vxge_hw_blockpool_entry *
-__vxge_hw_blockpool_block_allocate(struct __vxge_hw_device *hldev,
-			u32 size);
-
-static void
-__vxge_hw_blockpool_block_free(struct __vxge_hw_device *hldev,
-			struct __vxge_hw_blockpool_entry *entry);
-
-static void vxge_hw_blockpool_block_add(struct __vxge_hw_device *devh,
-					void *block_addr,
-					u32 length,
-					struct pci_dev *dma_h,
-					struct pci_dev *acc_handle);
-
-static enum vxge_hw_status
-__vxge_hw_blockpool_create(struct __vxge_hw_device *hldev,
-			struct __vxge_hw_blockpool  *blockpool,
-			u32 pool_size,
-			u32 pool_max);
-
-static void
-__vxge_hw_blockpool_destroy(struct __vxge_hw_blockpool  *blockpool);
-
-static void *
-__vxge_hw_blockpool_malloc(struct __vxge_hw_device *hldev,
-			u32 size,
-			struct vxge_hw_mempool_dma *dma_object);
-
-static void
-__vxge_hw_blockpool_free(struct __vxge_hw_device *hldev,
-			void *memblock,
-			u32 size,
-			struct vxge_hw_mempool_dma *dma_object);
-
-static void
-__vxge_hw_channel_free(
-	struct __vxge_hw_channel *channel);
-
-static enum vxge_hw_status __vxge_hw_ring_delete(struct __vxge_hw_vpath_handle *vp);
-
-static enum vxge_hw_status
-__vxge_hw_device_config_check(struct vxge_hw_device_config *new_config);
-
-static enum vxge_hw_status
-__vxge_hw_device_register_poll(
-	void __iomem	*reg,
-	u64 mask, u32 max_millis);
-
-static inline enum vxge_hw_status
-__vxge_hw_pio_mem_write64(u64 val64, void __iomem *addr,
-			  u64 mask, u32 max_millis)
-{
-	__vxge_hw_pio_mem_write32_lower((u32)vxge_bVALn(val64, 32, 32), addr);
-	wmb();
-
-	__vxge_hw_pio_mem_write32_upper((u32)vxge_bVALn(val64, 0, 32), addr);
-	wmb();
-
-	return  __vxge_hw_device_register_poll(addr, mask, max_millis);
+#define VXGE_HW_VPATH_STATS_PIO_READ(offset) {				\
+	status = __vxge_hw_vpath_stats_access(vpath,			\
+					      VXGE_HW_STATS_OP_READ,	\
+					      offset,			\
+					      &val64);			\
+	if (status != VXGE_HW_OK)					\
+		return status;						\
 }
 
-static struct vxge_hw_mempool*
-__vxge_hw_mempool_create(struct __vxge_hw_device *devh, u32 memblock_size,
-			u32 item_size, u32 private_size, u32 items_initial,
-			u32 items_max, struct vxge_hw_mempool_cbs *mp_callback,
-			void *userdata);
-
-static void __vxge_hw_mempool_destroy(struct vxge_hw_mempool *mempool);
-
-static enum vxge_hw_status
-__vxge_hw_vpath_stats_get(struct __vxge_hw_virtualpath *vpath,
-			  struct vxge_hw_vpath_stats_hw_info *hw_stats);
-
-static enum vxge_hw_status
-vxge_hw_vpath_stats_enable(struct __vxge_hw_vpath_handle *vpath_handle);
-
-static enum vxge_hw_status
-__vxge_hw_legacy_swapper_set(struct vxge_hw_legacy_reg __iomem *legacy_reg);
-
-static void
-__vxge_hw_vp_terminate(struct __vxge_hw_device *devh, u32 vp_id);
-
-static enum vxge_hw_status
-__vxge_hw_vpath_xmac_tx_stats_get(struct __vxge_hw_virtualpath	*vpath,
-				  struct vxge_hw_xmac_vpath_tx_stats *vpath_tx_stats);
-
-static enum vxge_hw_status
-__vxge_hw_vpath_xmac_rx_stats_get(struct __vxge_hw_virtualpath	*vpath,
-				  struct vxge_hw_xmac_vpath_rx_stats *vpath_rx_stats);
-
 static void
 vxge_hw_vpath_set_zero_rx_frm_len(struct vxge_hw_vpath_reg __iomem *vp_reg)
 {
@@ -124,8 +39,6 @@ vxge_hw_vpath_set_zero_rx_frm_len(struct vxge_hw_vpath_reg __iomem *vp_reg)
 	val64 &= ~VXGE_HW_RXMAC_VCFG0_RTS_MAX_FRM_LEN(0x3fff);
 	writeq(val64, &vp_reg->rxmac_vcfg0);
 	val64 = readq(&vp_reg->rxmac_vcfg0);
-
-	return;
 }
 
 /*
@@ -197,6 +110,50 @@ void vxge_hw_device_wait_receive_idle(struct __vxge_hw_device *hldev)
 	}
 }
 
+/*
+ * __vxge_hw_device_register_poll
+ * Will poll certain register for specified amount of time.
+ * Will poll until masked bit is not cleared.
+ */
+static enum vxge_hw_status
+__vxge_hw_device_register_poll(void __iomem *reg, u64 mask, u32 max_millis)
+{
+	u64 val64;
+	u32 i = 0;
+	enum vxge_hw_status ret = VXGE_HW_FAIL;
+
+	udelay(10);
+
+	do {
+		val64 = readq(reg);
+		if (!(val64 & mask))
+			return VXGE_HW_OK;
+		udelay(100);
+	} while (++i <= 9);
+
+	i = 0;
+	do {
+		val64 = readq(reg);
+		if (!(val64 & mask))
+			return VXGE_HW_OK;
+		mdelay(1);
+	} while (++i <= max_millis);
+
+	return ret;
+}
+
+static inline enum vxge_hw_status
+__vxge_hw_pio_mem_write64(u64 val64, void __iomem *addr,
+			  u64 mask, u32 max_millis)
+{
+	__vxge_hw_pio_mem_write32_lower((u32)vxge_bVALn(val64, 32, 32), addr);
+	wmb();
+	__vxge_hw_pio_mem_write32_upper((u32)vxge_bVALn(val64, 0, 32), addr);
+	wmb();
+
+	return __vxge_hw_device_register_poll(addr, mask, max_millis);
+}
+
 static enum vxge_hw_status
 vxge_hw_vpath_fw_api(struct __vxge_hw_virtualpath *vpath, u32 action,
 		     u32 fw_memo, u32 offset, u64 *data0, u64 *data1,
@@ -446,77 +403,6 @@ vxge_hw_vpath_eprom_img_ver_get(struct __vxge_hw_device *hldev,
 }
 
 /*
- * __vxge_hw_channel_allocate - Allocate memory for channel
- * This function allocates required memory for the channel and various arrays
- * in the channel
- */
-static struct __vxge_hw_channel *
-__vxge_hw_channel_allocate(struct __vxge_hw_vpath_handle *vph,
-			   enum __vxge_hw_channel_type type,
-	u32 length, u32 per_dtr_space, void *userdata)
-{
-	struct __vxge_hw_channel *channel;
-	struct __vxge_hw_device *hldev;
-	int size = 0;
-	u32 vp_id;
-
-	hldev = vph->vpath->hldev;
-	vp_id = vph->vpath->vp_id;
-
-	switch (type) {
-	case VXGE_HW_CHANNEL_TYPE_FIFO:
-		size = sizeof(struct __vxge_hw_fifo);
-		break;
-	case VXGE_HW_CHANNEL_TYPE_RING:
-		size = sizeof(struct __vxge_hw_ring);
-		break;
-	default:
-		break;
-	}
-
-	channel = kzalloc(size, GFP_KERNEL);
-	if (channel == NULL)
-		goto exit0;
-	INIT_LIST_HEAD(&channel->item);
-
-	channel->common_reg = hldev->common_reg;
-	channel->first_vp_id = hldev->first_vp_id;
-	channel->type = type;
-	channel->devh = hldev;
-	channel->vph = vph;
-	channel->userdata = userdata;
-	channel->per_dtr_space = per_dtr_space;
-	channel->length = length;
-	channel->vp_id = vp_id;
-
-	channel->work_arr = kzalloc(sizeof(void *)*length, GFP_KERNEL);
-	if (channel->work_arr == NULL)
-		goto exit1;
-
-	channel->free_arr = kzalloc(sizeof(void *)*length, GFP_KERNEL);
-	if (channel->free_arr == NULL)
-		goto exit1;
-	channel->free_ptr = length;
-
-	channel->reserve_arr = kzalloc(sizeof(void *)*length, GFP_KERNEL);
-	if (channel->reserve_arr == NULL)
-		goto exit1;
-	channel->reserve_ptr = length;
-	channel->reserve_top = 0;
-
-	channel->orig_arr = kzalloc(sizeof(void *)*length, GFP_KERNEL);
-	if (channel->orig_arr == NULL)
-		goto exit1;
-
-	return channel;
-exit1:
-	__vxge_hw_channel_free(channel);
-
-exit0:
-	return NULL;
-}
-
-/*
  * __vxge_hw_channel_free - Free memory allocated for channel
  * This function deallocates memory from the channel and various arrays
  * in the channel
@@ -609,38 +495,6 @@ static void __vxge_hw_device_pci_e_init(struct __vxge_hw_device *hldev)
 	pci_save_state(hldev->pdev);
 }
 
-/*
- * __vxge_hw_device_register_poll
- * Will poll certain register for specified amount of time.
- * Will poll until masked bit is not cleared.
- */
-static enum vxge_hw_status
-__vxge_hw_device_register_poll(void __iomem *reg, u64 mask, u32 max_millis)
-{
-	u64 val64;
-	u32 i = 0;
-	enum vxge_hw_status ret = VXGE_HW_FAIL;
-
-	udelay(10);
-
-	do {
-		val64 = readq(reg);
-		if (!(val64 & mask))
-			return VXGE_HW_OK;
-		udelay(100);
-	} while (++i <= 9);
-
-	i = 0;
-	do {
-		val64 = readq(reg);
-		if (!(val64 & mask))
-			return VXGE_HW_OK;
-		mdelay(1);
-	} while (++i <= max_millis);
-
-	return ret;
-}
-
 /* __vxge_hw_device_vpath_reset_in_prog_check - Check if vpath reset
  * in progress
  * This routine checks the vpath reset in progress register is turned zero
@@ -656,6 +510,60 @@ __vxge_hw_device_vpath_reset_in_prog_check(u64 __iomem *vpath_rst_in_prog)
 }
 
 /*
+ * _hw_legacy_swapper_set - Set the swapper bits for the legacy secion.
+ * Set the swapper bits appropriately for the lagacy section.
+ */
+static enum vxge_hw_status
+__vxge_hw_legacy_swapper_set(struct vxge_hw_legacy_reg __iomem *legacy_reg)
+{
+	u64 val64;
+	enum vxge_hw_status status = VXGE_HW_OK;
+
+	val64 = readq(&legacy_reg->toc_swapper_fb);
+
+	wmb();
+
+	switch (val64) {
+	case VXGE_HW_SWAPPER_INITIAL_VALUE:
+		return status;
+
+	case VXGE_HW_SWAPPER_BYTE_SWAPPED_BIT_FLIPPED:
+		writeq(VXGE_HW_SWAPPER_READ_BYTE_SWAP_ENABLE,
+			&legacy_reg->pifm_rd_swap_en);
+		writeq(VXGE_HW_SWAPPER_READ_BIT_FLAP_ENABLE,
+			&legacy_reg->pifm_rd_flip_en);
+		writeq(VXGE_HW_SWAPPER_WRITE_BYTE_SWAP_ENABLE,
+			&legacy_reg->pifm_wr_swap_en);
+		writeq(VXGE_HW_SWAPPER_WRITE_BIT_FLAP_ENABLE,
+			&legacy_reg->pifm_wr_flip_en);
+		break;
+
+	case VXGE_HW_SWAPPER_BYTE_SWAPPED:
+		writeq(VXGE_HW_SWAPPER_READ_BYTE_SWAP_ENABLE,
+			&legacy_reg->pifm_rd_swap_en);
+		writeq(VXGE_HW_SWAPPER_WRITE_BYTE_SWAP_ENABLE,
+			&legacy_reg->pifm_wr_swap_en);
+		break;
+
+	case VXGE_HW_SWAPPER_BIT_FLIPPED:
+		writeq(VXGE_HW_SWAPPER_READ_BIT_FLAP_ENABLE,
+			&legacy_reg->pifm_rd_flip_en);
+		writeq(VXGE_HW_SWAPPER_WRITE_BIT_FLAP_ENABLE,
+			&legacy_reg->pifm_wr_flip_en);
+		break;
+	}
+
+	wmb();
+
+	val64 = readq(&legacy_reg->toc_swapper_fb);
+
+	if (val64 != VXGE_HW_SWAPPER_INITIAL_VALUE)
+		status = VXGE_HW_ERR_SWAPPER_CTRL;
+
+	return status;
+}
+
+/*
  * __vxge_hw_device_toc_get
  * This routine sets the swapper and reads the toc pointer and returns the
  * memory mapped address of the toc
@@ -1132,7 +1040,6 @@ vxge_hw_device_hw_info_get(void __iomem *bar0,
 	   (u32)VXGE_HW_HOST_TYPE_ASSIGNMENTS_GET_HOST_TYPE_ASSIGNMENTS(val64);
 
 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-
 		if (!((hw_info->vpath_mask) & vxge_mBIT(i)))
 			continue;
 
@@ -1196,6 +1103,218 @@ exit:
 }
 
 /*
+ * __vxge_hw_blockpool_destroy - Deallocates the block pool
+ */
+static void __vxge_hw_blockpool_destroy(struct __vxge_hw_blockpool *blockpool)
+{
+	struct __vxge_hw_device *hldev;
+	struct list_head *p, *n;
+	u16 ret;
+
+	if (blockpool == NULL) {
+		ret = 1;
+		goto exit;
+	}
+
+	hldev = blockpool->hldev;
+
+	list_for_each_safe(p, n, &blockpool->free_block_list) {
+		pci_unmap_single(hldev->pdev,
+			((struct __vxge_hw_blockpool_entry *)p)->dma_addr,
+			((struct __vxge_hw_blockpool_entry *)p)->length,
+			PCI_DMA_BIDIRECTIONAL);
+
+		vxge_os_dma_free(hldev->pdev,
+			((struct __vxge_hw_blockpool_entry *)p)->memblock,
+			&((struct __vxge_hw_blockpool_entry *)p)->acc_handle);
+
+		list_del(&((struct __vxge_hw_blockpool_entry *)p)->item);
+		kfree(p);
+		blockpool->pool_size--;
+	}
+
+	list_for_each_safe(p, n, &blockpool->free_entry_list) {
+		list_del(&((struct __vxge_hw_blockpool_entry *)p)->item);
+		kfree((void *)p);
+	}
+	ret = 0;
+exit:
+	return;
+}
+
+/*
+ * __vxge_hw_blockpool_create - Create block pool
+ */
+static enum vxge_hw_status
+__vxge_hw_blockpool_create(struct __vxge_hw_device *hldev,
+			   struct __vxge_hw_blockpool *blockpool,
+			   u32 pool_size,
+			   u32 pool_max)
+{
+	u32 i;
+	struct __vxge_hw_blockpool_entry *entry = NULL;
+	void *memblock;
+	dma_addr_t dma_addr;
+	struct pci_dev *dma_handle;
+	struct pci_dev *acc_handle;
+	enum vxge_hw_status status = VXGE_HW_OK;
+
+	if (blockpool == NULL) {
+		status = VXGE_HW_FAIL;
+		goto blockpool_create_exit;
+	}
+
+	blockpool->hldev = hldev;
+	blockpool->block_size = VXGE_HW_BLOCK_SIZE;
+	blockpool->pool_size = 0;
+	blockpool->pool_max = pool_max;
+	blockpool->req_out = 0;
+
+	INIT_LIST_HEAD(&blockpool->free_block_list);
+	INIT_LIST_HEAD(&blockpool->free_entry_list);
+
+	for (i = 0; i < pool_size + pool_max; i++) {
+		entry = kzalloc(sizeof(struct __vxge_hw_blockpool_entry),
+				GFP_KERNEL);
+		if (entry == NULL) {
+			__vxge_hw_blockpool_destroy(blockpool);
+			status = VXGE_HW_ERR_OUT_OF_MEMORY;
+			goto blockpool_create_exit;
+		}
+		list_add(&entry->item, &blockpool->free_entry_list);
+	}
+
+	for (i = 0; i < pool_size; i++) {
+		memblock = vxge_os_dma_malloc(
+				hldev->pdev,
+				VXGE_HW_BLOCK_SIZE,
+				&dma_handle,
+				&acc_handle);
+		if (memblock == NULL) {
+			__vxge_hw_blockpool_destroy(blockpool);
+			status = VXGE_HW_ERR_OUT_OF_MEMORY;
+			goto blockpool_create_exit;
+		}
+
+		dma_addr = pci_map_single(hldev->pdev, memblock,
+				VXGE_HW_BLOCK_SIZE, PCI_DMA_BIDIRECTIONAL);
+		if (unlikely(pci_dma_mapping_error(hldev->pdev,
+				dma_addr))) {
+			vxge_os_dma_free(hldev->pdev, memblock, &acc_handle);
+			__vxge_hw_blockpool_destroy(blockpool);
+			status = VXGE_HW_ERR_OUT_OF_MEMORY;
+			goto blockpool_create_exit;
+		}
+
+		if (!list_empty(&blockpool->free_entry_list))
+			entry = (struct __vxge_hw_blockpool_entry *)
+				list_first_entry(&blockpool->free_entry_list,
+					struct __vxge_hw_blockpool_entry,
+					item);
+
+		if (entry == NULL)
+			entry =
+			    kzalloc(sizeof(struct __vxge_hw_blockpool_entry),
+					GFP_KERNEL);
+		if (entry != NULL) {
+			list_del(&entry->item);
+			entry->length = VXGE_HW_BLOCK_SIZE;
+			entry->memblock = memblock;
+			entry->dma_addr = dma_addr;
+			entry->acc_handle = acc_handle;
+			entry->dma_handle = dma_handle;
+			list_add(&entry->item,
+					  &blockpool->free_block_list);
+			blockpool->pool_size++;
+		} else {
+			__vxge_hw_blockpool_destroy(blockpool);
+			status = VXGE_HW_ERR_OUT_OF_MEMORY;
+			goto blockpool_create_exit;
+		}
+	}
+
+blockpool_create_exit:
+	return status;
+}
+
+/*
+ * __vxge_hw_device_fifo_config_check - Check fifo configuration.
+ * Check the fifo configuration
+ */
+static enum vxge_hw_status
+__vxge_hw_device_fifo_config_check(struct vxge_hw_fifo_config *fifo_config)
+{
+	if ((fifo_config->fifo_blocks < VXGE_HW_MIN_FIFO_BLOCKS) ||
+	    (fifo_config->fifo_blocks > VXGE_HW_MAX_FIFO_BLOCKS))
+		return VXGE_HW_BADCFG_FIFO_BLOCKS;
+
+	return VXGE_HW_OK;
+}
+
+/*
+ * __vxge_hw_device_vpath_config_check - Check vpath configuration.
+ * Check the vpath configuration
+ */
+static enum vxge_hw_status
+__vxge_hw_device_vpath_config_check(struct vxge_hw_vp_config *vp_config)
+{
+	enum vxge_hw_status status;
+
+	if ((vp_config->min_bandwidth < VXGE_HW_VPATH_BANDWIDTH_MIN) ||
+	    (vp_config->min_bandwidth >	VXGE_HW_VPATH_BANDWIDTH_MAX))
+		return VXGE_HW_BADCFG_VPATH_MIN_BANDWIDTH;
+
+	status = __vxge_hw_device_fifo_config_check(&vp_config->fifo);
+	if (status != VXGE_HW_OK)
+		return status;
+
+	if ((vp_config->mtu != VXGE_HW_VPATH_USE_FLASH_DEFAULT_INITIAL_MTU) &&
+		((vp_config->mtu < VXGE_HW_VPATH_MIN_INITIAL_MTU) ||
+		(vp_config->mtu > VXGE_HW_VPATH_MAX_INITIAL_MTU)))
+		return VXGE_HW_BADCFG_VPATH_MTU;
+
+	if ((vp_config->rpa_strip_vlan_tag !=
+		VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_USE_FLASH_DEFAULT) &&
+		(vp_config->rpa_strip_vlan_tag !=
+		VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE) &&
+		(vp_config->rpa_strip_vlan_tag !=
+		VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_DISABLE))
+		return VXGE_HW_BADCFG_VPATH_RPA_STRIP_VLAN_TAG;
+
+	return VXGE_HW_OK;
+}
+
+/*
+ * __vxge_hw_device_config_check - Check device configuration.
+ * Check the device configuration
+ */
+static enum vxge_hw_status
+__vxge_hw_device_config_check(struct vxge_hw_device_config *new_config)
+{
+	u32 i;
+	enum vxge_hw_status status;
+
+	if ((new_config->intr_mode != VXGE_HW_INTR_MODE_IRQLINE) &&
+	    (new_config->intr_mode != VXGE_HW_INTR_MODE_MSIX) &&
+	    (new_config->intr_mode != VXGE_HW_INTR_MODE_MSIX_ONE_SHOT) &&
+	    (new_config->intr_mode != VXGE_HW_INTR_MODE_DEF))
+		return VXGE_HW_BADCFG_INTR_MODE;
+
+	if ((new_config->rts_mac_en != VXGE_HW_RTS_MAC_DISABLE) &&
+	    (new_config->rts_mac_en != VXGE_HW_RTS_MAC_ENABLE))
+		return VXGE_HW_BADCFG_RTS_MAC_EN;
+
+	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
+		status = __vxge_hw_device_vpath_config_check(
+				&new_config->vp_config[i]);
+		if (status != VXGE_HW_OK)
+			return status;
+	}
+
+	return VXGE_HW_OK;
+}
+
+/*
  * vxge_hw_device_initialize - Initialize Titan device.
  * Initialize Titan device. Note that all the arguments of this public API
  * are 'IN', including @hldev. Driver cooperates with
@@ -1219,14 +1338,12 @@ vxge_hw_device_initialize(
 	if (status != VXGE_HW_OK)
 		goto exit;
 
-	hldev = (struct __vxge_hw_device *)
-			vmalloc(sizeof(struct __vxge_hw_device));
+	hldev = vzalloc(sizeof(struct __vxge_hw_device));
 	if (hldev == NULL) {
 		status = VXGE_HW_ERR_OUT_OF_MEMORY;
 		goto exit;
 	}
 
-	memset(hldev, 0, sizeof(struct __vxge_hw_device));
 	hldev->magic = VXGE_HW_DEVICE_MAGIC;
 
 	vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_ALL);
@@ -1305,6 +1422,242 @@ vxge_hw_device_terminate(struct __vxge_hw_device *hldev)
 }
 
 /*
+ * __vxge_hw_vpath_stats_access - Get the statistics from the given location
+ *                           and offset and perform an operation
+ */
+static enum vxge_hw_status
+__vxge_hw_vpath_stats_access(struct __vxge_hw_virtualpath *vpath,
+			     u32 operation, u32 offset, u64 *stat)
+{
+	u64 val64;
+	enum vxge_hw_status status = VXGE_HW_OK;
+	struct vxge_hw_vpath_reg __iomem *vp_reg;
+
+	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN) {
+		status = VXGE_HW_ERR_VPATH_NOT_OPEN;
+		goto vpath_stats_access_exit;
+	}
+
+	vp_reg = vpath->vp_reg;
+
+	val64 =  VXGE_HW_XMAC_STATS_ACCESS_CMD_OP(operation) |
+		 VXGE_HW_XMAC_STATS_ACCESS_CMD_STROBE |
+		 VXGE_HW_XMAC_STATS_ACCESS_CMD_OFFSET_SEL(offset);
+
+	status = __vxge_hw_pio_mem_write64(val64,
+				&vp_reg->xmac_stats_access_cmd,
+				VXGE_HW_XMAC_STATS_ACCESS_CMD_STROBE,
+				vpath->hldev->config.device_poll_millis);
+	if ((status == VXGE_HW_OK) && (operation == VXGE_HW_STATS_OP_READ))
+		*stat = readq(&vp_reg->xmac_stats_access_data);
+	else
+		*stat = 0;
+
+vpath_stats_access_exit:
+	return status;
+}
+
+/*
+ * __vxge_hw_vpath_xmac_tx_stats_get - Get the TX Statistics of a vpath
+ */
+static enum vxge_hw_status
+__vxge_hw_vpath_xmac_tx_stats_get(struct __vxge_hw_virtualpath *vpath,
+			struct vxge_hw_xmac_vpath_tx_stats *vpath_tx_stats)
+{
+	u64 *val64;
+	int i;
+	u32 offset = VXGE_HW_STATS_VPATH_TX_OFFSET;
+	enum vxge_hw_status status = VXGE_HW_OK;
+
+	val64 = (u64 *)vpath_tx_stats;
+
+	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN) {
+		status = VXGE_HW_ERR_VPATH_NOT_OPEN;
+		goto exit;
+	}
+
+	for (i = 0; i < sizeof(struct vxge_hw_xmac_vpath_tx_stats) / 8; i++) {
+		status = __vxge_hw_vpath_stats_access(vpath,
+					VXGE_HW_STATS_OP_READ,
+					offset, val64);
+		if (status != VXGE_HW_OK)
+			goto exit;
+		offset++;
+		val64++;
+	}
+exit:
+	return status;
+}
+
+/*
+ * __vxge_hw_vpath_xmac_rx_stats_get - Get the RX Statistics of a vpath
+ */
+static enum vxge_hw_status
+__vxge_hw_vpath_xmac_rx_stats_get(struct __vxge_hw_virtualpath *vpath,
+			struct vxge_hw_xmac_vpath_rx_stats *vpath_rx_stats)
+{
+	u64 *val64;
+	enum vxge_hw_status status = VXGE_HW_OK;
+	int i;
+	u32 offset = VXGE_HW_STATS_VPATH_RX_OFFSET;
+	val64 = (u64 *) vpath_rx_stats;
+
+	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN) {
+		status = VXGE_HW_ERR_VPATH_NOT_OPEN;
+		goto exit;
+	}
+	for (i = 0; i < sizeof(struct vxge_hw_xmac_vpath_rx_stats) / 8; i++) {
+		status = __vxge_hw_vpath_stats_access(vpath,
+					VXGE_HW_STATS_OP_READ,
+					offset >> 3, val64);
+		if (status != VXGE_HW_OK)
+			goto exit;
+
+		offset += 8;
+		val64++;
+	}
+exit:
+	return status;
+}
+
+/*
+ * __vxge_hw_vpath_stats_get - Get the vpath hw statistics.
+ */
+static enum vxge_hw_status
+__vxge_hw_vpath_stats_get(struct __vxge_hw_virtualpath *vpath,
+			  struct vxge_hw_vpath_stats_hw_info *hw_stats)
+{
+	u64 val64;
+	enum vxge_hw_status status = VXGE_HW_OK;
+	struct vxge_hw_vpath_reg __iomem *vp_reg;
+
+	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN) {
+		status = VXGE_HW_ERR_VPATH_NOT_OPEN;
+		goto exit;
+	}
+	vp_reg = vpath->vp_reg;
+
+	val64 = readq(&vp_reg->vpath_debug_stats0);
+	hw_stats->ini_num_mwr_sent =
+		(u32)VXGE_HW_VPATH_DEBUG_STATS0_GET_INI_NUM_MWR_SENT(val64);
+
+	val64 = readq(&vp_reg->vpath_debug_stats1);
+	hw_stats->ini_num_mrd_sent =
+		(u32)VXGE_HW_VPATH_DEBUG_STATS1_GET_INI_NUM_MRD_SENT(val64);
+
+	val64 = readq(&vp_reg->vpath_debug_stats2);
+	hw_stats->ini_num_cpl_rcvd =
+		(u32)VXGE_HW_VPATH_DEBUG_STATS2_GET_INI_NUM_CPL_RCVD(val64);
+
+	val64 = readq(&vp_reg->vpath_debug_stats3);
+	hw_stats->ini_num_mwr_byte_sent =
+		VXGE_HW_VPATH_DEBUG_STATS3_GET_INI_NUM_MWR_BYTE_SENT(val64);
+
+	val64 = readq(&vp_reg->vpath_debug_stats4);
+	hw_stats->ini_num_cpl_byte_rcvd =
+		VXGE_HW_VPATH_DEBUG_STATS4_GET_INI_NUM_CPL_BYTE_RCVD(val64);
+
+	val64 = readq(&vp_reg->vpath_debug_stats5);
+	hw_stats->wrcrdtarb_xoff =
+		(u32)VXGE_HW_VPATH_DEBUG_STATS5_GET_WRCRDTARB_XOFF(val64);
+
+	val64 = readq(&vp_reg->vpath_debug_stats6);
+	hw_stats->rdcrdtarb_xoff =
+		(u32)VXGE_HW_VPATH_DEBUG_STATS6_GET_RDCRDTARB_XOFF(val64);
+
+	val64 = readq(&vp_reg->vpath_genstats_count01);
+	hw_stats->vpath_genstats_count0 =
+	(u32)VXGE_HW_VPATH_GENSTATS_COUNT01_GET_PPIF_VPATH_GENSTATS_COUNT0(
+		val64);
+
+	val64 = readq(&vp_reg->vpath_genstats_count01);
+	hw_stats->vpath_genstats_count1 =
+	(u32)VXGE_HW_VPATH_GENSTATS_COUNT01_GET_PPIF_VPATH_GENSTATS_COUNT1(
+		val64);
+
+	val64 = readq(&vp_reg->vpath_genstats_count23);
+	hw_stats->vpath_genstats_count2 =
+	(u32)VXGE_HW_VPATH_GENSTATS_COUNT23_GET_PPIF_VPATH_GENSTATS_COUNT2(
+		val64);
+
+	val64 = readq(&vp_reg->vpath_genstats_count01);
+	hw_stats->vpath_genstats_count3 =
+	(u32)VXGE_HW_VPATH_GENSTATS_COUNT23_GET_PPIF_VPATH_GENSTATS_COUNT3(
+		val64);
+
+	val64 = readq(&vp_reg->vpath_genstats_count4);
+	hw_stats->vpath_genstats_count4 =
+	(u32)VXGE_HW_VPATH_GENSTATS_COUNT4_GET_PPIF_VPATH_GENSTATS_COUNT4(
+		val64);
+
+	val64 = readq(&vp_reg->vpath_genstats_count5);
+	hw_stats->vpath_genstats_count5 =
+	(u32)VXGE_HW_VPATH_GENSTATS_COUNT5_GET_PPIF_VPATH_GENSTATS_COUNT5(
+		val64);
+
+	status = __vxge_hw_vpath_xmac_tx_stats_get(vpath, &hw_stats->tx_stats);
+	if (status != VXGE_HW_OK)
+		goto exit;
+
+	status = __vxge_hw_vpath_xmac_rx_stats_get(vpath, &hw_stats->rx_stats);
+	if (status != VXGE_HW_OK)
+		goto exit;
+
+	VXGE_HW_VPATH_STATS_PIO_READ(
+		VXGE_HW_STATS_VPATH_PROG_EVENT_VNUM0_OFFSET);
+
+	hw_stats->prog_event_vnum0 =
+			(u32)VXGE_HW_STATS_GET_VPATH_PROG_EVENT_VNUM0(val64);
+
+	hw_stats->prog_event_vnum1 =
+			(u32)VXGE_HW_STATS_GET_VPATH_PROG_EVENT_VNUM1(val64);
+
+	VXGE_HW_VPATH_STATS_PIO_READ(
+		VXGE_HW_STATS_VPATH_PROG_EVENT_VNUM2_OFFSET);
+
+	hw_stats->prog_event_vnum2 =
+			(u32)VXGE_HW_STATS_GET_VPATH_PROG_EVENT_VNUM2(val64);
+
+	hw_stats->prog_event_vnum3 =
+			(u32)VXGE_HW_STATS_GET_VPATH_PROG_EVENT_VNUM3(val64);
+
+	val64 = readq(&vp_reg->rx_multi_cast_stats);
+	hw_stats->rx_multi_cast_frame_discard =
+		(u16)VXGE_HW_RX_MULTI_CAST_STATS_GET_FRAME_DISCARD(val64);
+
+	val64 = readq(&vp_reg->rx_frm_transferred);
+	hw_stats->rx_frm_transferred =
+		(u32)VXGE_HW_RX_FRM_TRANSFERRED_GET_RX_FRM_TRANSFERRED(val64);
+
+	val64 = readq(&vp_reg->rxd_returned);
+	hw_stats->rxd_returned =
+		(u16)VXGE_HW_RXD_RETURNED_GET_RXD_RETURNED(val64);
+
+	val64 = readq(&vp_reg->dbg_stats_rx_mpa);
+	hw_stats->rx_mpa_len_fail_frms =
+		(u16)VXGE_HW_DBG_STATS_GET_RX_MPA_LEN_FAIL_FRMS(val64);
+	hw_stats->rx_mpa_mrk_fail_frms =
+		(u16)VXGE_HW_DBG_STATS_GET_RX_MPA_MRK_FAIL_FRMS(val64);
+	hw_stats->rx_mpa_crc_fail_frms =
+		(u16)VXGE_HW_DBG_STATS_GET_RX_MPA_CRC_FAIL_FRMS(val64);
+
+	val64 = readq(&vp_reg->dbg_stats_rx_fau);
+	hw_stats->rx_permitted_frms =
+		(u16)VXGE_HW_DBG_STATS_GET_RX_FAU_RX_PERMITTED_FRMS(val64);
+	hw_stats->rx_vp_reset_discarded_frms =
+	(u16)VXGE_HW_DBG_STATS_GET_RX_FAU_RX_VP_RESET_DISCARDED_FRMS(val64);
+	hw_stats->rx_wol_frms =
+		(u16)VXGE_HW_DBG_STATS_GET_RX_FAU_RX_WOL_FRMS(val64);
+
+	val64 = readq(&vp_reg->tx_vp_reset_discarded_frms);
+	hw_stats->tx_vp_reset_discarded_frms =
+	(u16)VXGE_HW_TX_VP_RESET_DISCARDED_FRMS_GET_TX_VP_RESET_DISCARDED_FRMS(
+		val64);
+exit:
+	return status;
+}
+
+/*
  * vxge_hw_device_stats_get - Get the device hw statistics.
  * Returns the vpath h/w stats for the device.
  */
@@ -1470,7 +1823,6 @@ vxge_hw_device_xmac_stats_get(struct __vxge_hw_device *hldev,
 
 	status = vxge_hw_device_xmac_aggr_stats_get(hldev,
 					0, &xmac_stats->aggr_stats[0]);
-
 	if (status != VXGE_HW_OK)
 		goto exit;
 
@@ -1845,189 +2197,359 @@ exit:
 }
 
 /*
- * __vxge_hw_ring_create - Create a Ring
- * This function creates Ring and initializes it.
+ * __vxge_hw_channel_allocate - Allocate memory for channel
+ * This function allocates required memory for the channel and various arrays
+ * in the channel
  */
-static enum vxge_hw_status
-__vxge_hw_ring_create(struct __vxge_hw_vpath_handle *vp,
-		      struct vxge_hw_ring_attr *attr)
+static struct __vxge_hw_channel *
+__vxge_hw_channel_allocate(struct __vxge_hw_vpath_handle *vph,
+			   enum __vxge_hw_channel_type type,
+			   u32 length, u32 per_dtr_space,
+			   void *userdata)
 {
-	enum vxge_hw_status status = VXGE_HW_OK;
-	struct __vxge_hw_ring *ring;
-	u32 ring_length;
-	struct vxge_hw_ring_config *config;
+	struct __vxge_hw_channel *channel;
 	struct __vxge_hw_device *hldev;
+	int size = 0;
 	u32 vp_id;
-	struct vxge_hw_mempool_cbs ring_mp_callback;
 
-	if ((vp == NULL) || (attr == NULL)) {
+	hldev = vph->vpath->hldev;
+	vp_id = vph->vpath->vp_id;
+
+	switch (type) {
+	case VXGE_HW_CHANNEL_TYPE_FIFO:
+		size = sizeof(struct __vxge_hw_fifo);
+		break;
+	case VXGE_HW_CHANNEL_TYPE_RING:
+		size = sizeof(struct __vxge_hw_ring);
+		break;
+	default:
+		break;
+	}
+
+	channel = kzalloc(size, GFP_KERNEL);
+	if (channel == NULL)
+		goto exit0;
+	INIT_LIST_HEAD(&channel->item);
+
+	channel->common_reg = hldev->common_reg;
+	channel->first_vp_id = hldev->first_vp_id;
+	channel->type = type;
+	channel->devh = hldev;
+	channel->vph = vph;
+	channel->userdata = userdata;
+	channel->per_dtr_space = per_dtr_space;
+	channel->length = length;
+	channel->vp_id = vp_id;
+
+	channel->work_arr = kzalloc(sizeof(void *)*length, GFP_KERNEL);
+	if (channel->work_arr == NULL)
+		goto exit1;
+
+	channel->free_arr = kzalloc(sizeof(void *)*length, GFP_KERNEL);
+	if (channel->free_arr == NULL)
+		goto exit1;
+	channel->free_ptr = length;
+
+	channel->reserve_arr = kzalloc(sizeof(void *)*length, GFP_KERNEL);
+	if (channel->reserve_arr == NULL)
+		goto exit1;
+	channel->reserve_ptr = length;
+	channel->reserve_top = 0;
+
+	channel->orig_arr = kzalloc(sizeof(void *)*length, GFP_KERNEL);
+	if (channel->orig_arr == NULL)
+		goto exit1;
+
+	return channel;
+exit1:
+	__vxge_hw_channel_free(channel);
+
+exit0:
+	return NULL;
+}
+
+/*
+ * vxge_hw_blockpool_block_add - callback for vxge_os_dma_malloc_async
+ * Adds a block to block pool
+ */
+static void vxge_hw_blockpool_block_add(struct __vxge_hw_device *devh,
+					void *block_addr,
+					u32 length,
+					struct pci_dev *dma_h,
+					struct pci_dev *acc_handle)
+{
+	struct __vxge_hw_blockpool *blockpool;
+	struct __vxge_hw_blockpool_entry *entry = NULL;
+	dma_addr_t dma_addr;
+	enum vxge_hw_status status = VXGE_HW_OK;
+	u32 req_out;
+
+	blockpool = &devh->block_pool;
+
+	if (block_addr == NULL) {
+		blockpool->req_out--;
 		status = VXGE_HW_FAIL;
 		goto exit;
 	}
 
-	hldev = vp->vpath->hldev;
-	vp_id = vp->vpath->vp_id;
+	dma_addr = pci_map_single(devh->pdev, block_addr, length,
+				PCI_DMA_BIDIRECTIONAL);
 
-	config = &hldev->config.vp_config[vp_id].ring;
+	if (unlikely(pci_dma_mapping_error(devh->pdev, dma_addr))) {
+		vxge_os_dma_free(devh->pdev, block_addr, &acc_handle);
+		blockpool->req_out--;
+		status = VXGE_HW_FAIL;
+		goto exit;
+	}
 
-	ring_length = config->ring_blocks *
-			vxge_hw_ring_rxds_per_block_get(config->buffer_mode);
+	if (!list_empty(&blockpool->free_entry_list))
+		entry = (struct __vxge_hw_blockpool_entry *)
+			list_first_entry(&blockpool->free_entry_list,
+				struct __vxge_hw_blockpool_entry,
+				item);
 
-	ring = (struct __vxge_hw_ring *)__vxge_hw_channel_allocate(vp,
-						VXGE_HW_CHANNEL_TYPE_RING,
-						ring_length,
-						attr->per_rxd_space,
-						attr->userdata);
+	if (entry == NULL)
+		entry =	vmalloc(sizeof(struct __vxge_hw_blockpool_entry));
+	else
+		list_del(&entry->item);
 
-	if (ring == NULL) {
+	if (entry != NULL) {
+		entry->length = length;
+		entry->memblock = block_addr;
+		entry->dma_addr = dma_addr;
+		entry->acc_handle = acc_handle;
+		entry->dma_handle = dma_h;
+		list_add(&entry->item, &blockpool->free_block_list);
+		blockpool->pool_size++;
+		status = VXGE_HW_OK;
+	} else
 		status = VXGE_HW_ERR_OUT_OF_MEMORY;
-		goto exit;
-	}
 
-	vp->vpath->ringh = ring;
-	ring->vp_id = vp_id;
-	ring->vp_reg = vp->vpath->vp_reg;
-	ring->common_reg = hldev->common_reg;
-	ring->stats = &vp->vpath->sw_stats->ring_stats;
-	ring->config = config;
-	ring->callback = attr->callback;
-	ring->rxd_init = attr->rxd_init;
-	ring->rxd_term = attr->rxd_term;
-	ring->buffer_mode = config->buffer_mode;
-	ring->rxds_limit = config->rxds_limit;
+	blockpool->req_out--;
 
-	ring->rxd_size = vxge_hw_ring_rxd_size_get(config->buffer_mode);
-	ring->rxd_priv_size =
-		sizeof(struct __vxge_hw_ring_rxd_priv) + attr->per_rxd_space;
-	ring->per_rxd_space = attr->per_rxd_space;
+	req_out = blockpool->req_out;
+exit:
+	return;
+}
 
-	ring->rxd_priv_size =
-		((ring->rxd_priv_size + VXGE_CACHE_LINE_SIZE - 1) /
-		VXGE_CACHE_LINE_SIZE) * VXGE_CACHE_LINE_SIZE;
+static inline void
+vxge_os_dma_malloc_async(struct pci_dev *pdev, void *devh, unsigned long size)
+{
+	gfp_t flags;
+	void *vaddr;
 
-	/* how many RxDs can fit into one block. Depends on configured
-	 * buffer_mode. */
-	ring->rxds_per_block =
-		vxge_hw_ring_rxds_per_block_get(config->buffer_mode);
+	if (in_interrupt())
+		flags = GFP_ATOMIC | GFP_DMA;
+	else
+		flags = GFP_KERNEL | GFP_DMA;
 
-	/* calculate actual RxD block private size */
-	ring->rxdblock_priv_size = ring->rxd_priv_size * ring->rxds_per_block;
-	ring_mp_callback.item_func_alloc = __vxge_hw_ring_mempool_item_alloc;
-	ring->mempool = __vxge_hw_mempool_create(hldev,
-				VXGE_HW_BLOCK_SIZE,
-				VXGE_HW_BLOCK_SIZE,
-				ring->rxdblock_priv_size,
-				ring->config->ring_blocks,
-				ring->config->ring_blocks,
-				&ring_mp_callback,
-				ring);
+	vaddr = kmalloc((size), flags);
 
-	if (ring->mempool == NULL) {
-		__vxge_hw_ring_delete(vp);
-		return VXGE_HW_ERR_OUT_OF_MEMORY;
-	}
+	vxge_hw_blockpool_block_add(devh, vaddr, size, pdev, pdev);
+}
 
-	status = __vxge_hw_channel_initialize(&ring->channel);
-	if (status != VXGE_HW_OK) {
-		__vxge_hw_ring_delete(vp);
-		goto exit;
+/*
+ * __vxge_hw_blockpool_blocks_add - Request additional blocks
+ */
+static
+void __vxge_hw_blockpool_blocks_add(struct __vxge_hw_blockpool *blockpool)
+{
+	u32 nreq = 0, i;
+
+	if ((blockpool->pool_size  +  blockpool->req_out) <
+		VXGE_HW_MIN_DMA_BLOCK_POOL_SIZE) {
+		nreq = VXGE_HW_INCR_DMA_BLOCK_POOL_SIZE;
+		blockpool->req_out += nreq;
 	}
 
-	/* Note:
-	 * Specifying rxd_init callback means two things:
-	 * 1) rxds need to be initialized by driver at channel-open time;
-	 * 2) rxds need to be posted at channel-open time
-	 *    (that's what the initial_replenish() below does)
-	 * Currently we don't have a case when the 1) is done without the 2).
-	 */
-	if (ring->rxd_init) {
-		status = vxge_hw_ring_replenish(ring);
-		if (status != VXGE_HW_OK) {
-			__vxge_hw_ring_delete(vp);
+	for (i = 0; i < nreq; i++)
+		vxge_os_dma_malloc_async(
+			((struct __vxge_hw_device *)blockpool->hldev)->pdev,
+			blockpool->hldev, VXGE_HW_BLOCK_SIZE);
+}
+
+/*
+ * __vxge_hw_blockpool_malloc - Allocate a memory block from pool
+ * Allocates a block of memory of given size, either from block pool
+ * or by calling vxge_os_dma_malloc()
+ */
+static void *__vxge_hw_blockpool_malloc(struct __vxge_hw_device *devh, u32 size,
+					struct vxge_hw_mempool_dma *dma_object)
+{
+	struct __vxge_hw_blockpool_entry *entry = NULL;
+	struct __vxge_hw_blockpool  *blockpool;
+	void *memblock = NULL;
+	enum vxge_hw_status status = VXGE_HW_OK;
+
+	blockpool = &devh->block_pool;
+
+	if (size != blockpool->block_size) {
+
+		memblock = vxge_os_dma_malloc(devh->pdev, size,
+						&dma_object->handle,
+						&dma_object->acc_handle);
+
+		if (memblock == NULL) {
+			status = VXGE_HW_ERR_OUT_OF_MEMORY;
 			goto exit;
 		}
-	}
 
-	/* initial replenish will increment the counter in its post() routine,
-	 * we have to reset it */
-	ring->stats->common_stats.usage_cnt = 0;
+		dma_object->addr = pci_map_single(devh->pdev, memblock, size,
+					PCI_DMA_BIDIRECTIONAL);
+
+		if (unlikely(pci_dma_mapping_error(devh->pdev,
+				dma_object->addr))) {
+			vxge_os_dma_free(devh->pdev, memblock,
+				&dma_object->acc_handle);
+			status = VXGE_HW_ERR_OUT_OF_MEMORY;
+			goto exit;
+		}
+
+	} else {
+
+		if (!list_empty(&blockpool->free_block_list))
+			entry = (struct __vxge_hw_blockpool_entry *)
+				list_first_entry(&blockpool->free_block_list,
+					struct __vxge_hw_blockpool_entry,
+					item);
+
+		if (entry != NULL) {
+			list_del(&entry->item);
+			dma_object->addr = entry->dma_addr;
+			dma_object->handle = entry->dma_handle;
+			dma_object->acc_handle = entry->acc_handle;
+			memblock = entry->memblock;
+
+			list_add(&entry->item,
+				&blockpool->free_entry_list);
+			blockpool->pool_size--;
+		}
+
+		if (memblock != NULL)
+			__vxge_hw_blockpool_blocks_add(blockpool);
+	}
 exit:
-	return status;
+	return memblock;
 }
 
 /*
- * __vxge_hw_ring_abort - Returns the RxD
- * This function terminates the RxDs of ring
+ * __vxge_hw_blockpool_blocks_remove - Free additional blocks
  */
-static enum vxge_hw_status __vxge_hw_ring_abort(struct __vxge_hw_ring *ring)
+static void
+__vxge_hw_blockpool_blocks_remove(struct __vxge_hw_blockpool *blockpool)
 {
-	void *rxdh;
-	struct __vxge_hw_channel *channel;
-
-	channel = &ring->channel;
+	struct list_head *p, *n;
 
-	for (;;) {
-		vxge_hw_channel_dtr_try_complete(channel, &rxdh);
+	list_for_each_safe(p, n, &blockpool->free_block_list) {
 
-		if (rxdh == NULL)
+		if (blockpool->pool_size < blockpool->pool_max)
 			break;
 
-		vxge_hw_channel_dtr_complete(channel);
+		pci_unmap_single(
+			((struct __vxge_hw_device *)blockpool->hldev)->pdev,
+			((struct __vxge_hw_blockpool_entry *)p)->dma_addr,
+			((struct __vxge_hw_blockpool_entry *)p)->length,
+			PCI_DMA_BIDIRECTIONAL);
 
-		if (ring->rxd_term)
-			ring->rxd_term(rxdh, VXGE_HW_RXD_STATE_POSTED,
-				channel->userdata);
+		vxge_os_dma_free(
+			((struct __vxge_hw_device *)blockpool->hldev)->pdev,
+			((struct __vxge_hw_blockpool_entry *)p)->memblock,
+			&((struct __vxge_hw_blockpool_entry *)p)->acc_handle);
 
-		vxge_hw_channel_dtr_free(channel, rxdh);
-	}
+		list_del(&((struct __vxge_hw_blockpool_entry *)p)->item);
 
-	return VXGE_HW_OK;
+		list_add(p, &blockpool->free_entry_list);
+
+		blockpool->pool_size--;
+
+	}
 }
 
 /*
- * __vxge_hw_ring_reset - Resets the ring
- * This function resets the ring during vpath reset operation
+ * __vxge_hw_blockpool_free - Frees the memory allcoated with
+ *				__vxge_hw_blockpool_malloc
  */
-static enum vxge_hw_status __vxge_hw_ring_reset(struct __vxge_hw_ring *ring)
+static void __vxge_hw_blockpool_free(struct __vxge_hw_device *devh,
+				     void *memblock, u32 size,
+				     struct vxge_hw_mempool_dma *dma_object)
 {
+	struct __vxge_hw_blockpool_entry *entry = NULL;
+	struct __vxge_hw_blockpool  *blockpool;
 	enum vxge_hw_status status = VXGE_HW_OK;
-	struct __vxge_hw_channel *channel;
 
-	channel = &ring->channel;
+	blockpool = &devh->block_pool;
 
-	__vxge_hw_ring_abort(ring);
+	if (size != blockpool->block_size) {
+		pci_unmap_single(devh->pdev, dma_object->addr, size,
+			PCI_DMA_BIDIRECTIONAL);
+		vxge_os_dma_free(devh->pdev, memblock, &dma_object->acc_handle);
+	} else {
 
-	status = __vxge_hw_channel_reset(channel);
+		if (!list_empty(&blockpool->free_entry_list))
+			entry = (struct __vxge_hw_blockpool_entry *)
+				list_first_entry(&blockpool->free_entry_list,
+					struct __vxge_hw_blockpool_entry,
+					item);
 
-	if (status != VXGE_HW_OK)
-		goto exit;
+		if (entry == NULL)
+			entry =	vmalloc(sizeof(
+					struct __vxge_hw_blockpool_entry));
+		else
+			list_del(&entry->item);
 
-	if (ring->rxd_init) {
-		status = vxge_hw_ring_replenish(ring);
-		if (status != VXGE_HW_OK)
-			goto exit;
+		if (entry != NULL) {
+			entry->length = size;
+			entry->memblock = memblock;
+			entry->dma_addr = dma_object->addr;
+			entry->acc_handle = dma_object->acc_handle;
+			entry->dma_handle = dma_object->handle;
+			list_add(&entry->item,
+					&blockpool->free_block_list);
+			blockpool->pool_size++;
+			status = VXGE_HW_OK;
+		} else
+			status = VXGE_HW_ERR_OUT_OF_MEMORY;
+
+		if (status == VXGE_HW_OK)
+			__vxge_hw_blockpool_blocks_remove(blockpool);
 	}
-exit:
-	return status;
 }
 
 /*
- * __vxge_hw_ring_delete - Removes the ring
- * This function freeup the memory pool and removes the ring
+ * vxge_hw_mempool_destroy
  */
-static enum vxge_hw_status __vxge_hw_ring_delete(struct __vxge_hw_vpath_handle *vp)
+static void __vxge_hw_mempool_destroy(struct vxge_hw_mempool *mempool)
 {
-	struct __vxge_hw_ring *ring = vp->vpath->ringh;
+	u32 i, j;
+	struct __vxge_hw_device *devh = mempool->devh;
 
-	__vxge_hw_ring_abort(ring);
+	for (i = 0; i < mempool->memblocks_allocated; i++) {
+		struct vxge_hw_mempool_dma *dma_object;
 
-	if (ring->mempool)
-		__vxge_hw_mempool_destroy(ring->mempool);
+		vxge_assert(mempool->memblocks_arr[i]);
+		vxge_assert(mempool->memblocks_dma_arr + i);
 
-	vp->vpath->ringh = NULL;
-	__vxge_hw_channel_free(&ring->channel);
+		dma_object = mempool->memblocks_dma_arr + i;
 
-	return VXGE_HW_OK;
+		for (j = 0; j < mempool->items_per_memblock; j++) {
+			u32 index = i * mempool->items_per_memblock + j;
+
+			/* to skip last partially filled(if any) memblock */
+			if (index >= mempool->items_current)
+				break;
+		}
+
+		vfree(mempool->memblocks_priv_arr[i]);
+
+		__vxge_hw_blockpool_free(devh, mempool->memblocks_arr[i],
+				mempool->memblock_size, dma_object);
+	}
+
+	vfree(mempool->items_arr);
+	vfree(mempool->memblocks_dma_arr);
+	vfree(mempool->memblocks_priv_arr);
+	vfree(mempool->memblocks_arr);
+	vfree(mempool);
 }
 
 /*
@@ -2064,15 +2586,12 @@ __vxge_hw_mempool_grow(struct vxge_hw_mempool *mempool, u32 num_allocate,
 		 * allocate new memblock and its private part at once.
 		 * This helps to minimize memory usage a lot. */
 		mempool->memblocks_priv_arr[i] =
-				vmalloc(mempool->items_priv_size * n_items);
+				vzalloc(mempool->items_priv_size * n_items);
 		if (mempool->memblocks_priv_arr[i] == NULL) {
 			status = VXGE_HW_ERR_OUT_OF_MEMORY;
 			goto exit;
 		}
 
-		memset(mempool->memblocks_priv_arr[i], 0,
-			     mempool->items_priv_size * n_items);
-
 		/* allocate DMA-capable memblock */
 		mempool->memblocks_arr[i] =
 			__vxge_hw_blockpool_malloc(mempool->devh,
@@ -2123,16 +2642,15 @@ exit:
  * with size enough to hold %items_initial number of items. Memory is
  * DMA-able but client must map/unmap before interoperating with the device.
  */
-static struct vxge_hw_mempool*
-__vxge_hw_mempool_create(
-	struct __vxge_hw_device *devh,
-	u32 memblock_size,
-	u32 item_size,
-	u32 items_priv_size,
-	u32 items_initial,
-	u32 items_max,
-	struct vxge_hw_mempool_cbs *mp_callback,
-	void *userdata)
+static struct vxge_hw_mempool *
+__vxge_hw_mempool_create(struct __vxge_hw_device *devh,
+			 u32 memblock_size,
+			 u32 item_size,
+			 u32 items_priv_size,
+			 u32 items_initial,
+			 u32 items_max,
+			 struct vxge_hw_mempool_cbs *mp_callback,
+			 void *userdata)
 {
 	enum vxge_hw_status status = VXGE_HW_OK;
 	u32 memblocks_to_allocate;
@@ -2144,13 +2662,11 @@ __vxge_hw_mempool_create(
 		goto exit;
 	}
 
-	mempool = (struct vxge_hw_mempool *)
-			vmalloc(sizeof(struct vxge_hw_mempool));
+	mempool = vzalloc(sizeof(struct vxge_hw_mempool));
 	if (mempool == NULL) {
 		status = VXGE_HW_ERR_OUT_OF_MEMORY;
 		goto exit;
 	}
-	memset(mempool, 0, sizeof(struct vxge_hw_mempool));
 
 	mempool->devh			= devh;
 	mempool->memblock_size		= memblock_size;
@@ -2170,53 +2686,43 @@ __vxge_hw_mempool_create(
 
 	/* allocate array of memblocks */
 	mempool->memblocks_arr =
-		(void **) vmalloc(sizeof(void *) * mempool->memblocks_max);
+		vzalloc(sizeof(void *) * mempool->memblocks_max);
 	if (mempool->memblocks_arr == NULL) {
 		__vxge_hw_mempool_destroy(mempool);
 		status = VXGE_HW_ERR_OUT_OF_MEMORY;
 		mempool = NULL;
 		goto exit;
 	}
-	memset(mempool->memblocks_arr, 0,
-		sizeof(void *) * mempool->memblocks_max);
 
 	/* allocate array of private parts of items per memblocks */
 	mempool->memblocks_priv_arr =
-		(void **) vmalloc(sizeof(void *) * mempool->memblocks_max);
+		vzalloc(sizeof(void *) * mempool->memblocks_max);
 	if (mempool->memblocks_priv_arr == NULL) {
 		__vxge_hw_mempool_destroy(mempool);
 		status = VXGE_HW_ERR_OUT_OF_MEMORY;
 		mempool = NULL;
 		goto exit;
 	}
-	memset(mempool->memblocks_priv_arr, 0,
-		    sizeof(void *) * mempool->memblocks_max);
 
 	/* allocate array of memblocks DMA objects */
-	mempool->memblocks_dma_arr = (struct vxge_hw_mempool_dma *)
-		vmalloc(sizeof(struct vxge_hw_mempool_dma) *
+	mempool->memblocks_dma_arr =
+		vzalloc(sizeof(struct vxge_hw_mempool_dma) *
 			mempool->memblocks_max);
-
 	if (mempool->memblocks_dma_arr == NULL) {
 		__vxge_hw_mempool_destroy(mempool);
 		status = VXGE_HW_ERR_OUT_OF_MEMORY;
 		mempool = NULL;
 		goto exit;
 	}
-	memset(mempool->memblocks_dma_arr, 0,
-			sizeof(struct vxge_hw_mempool_dma) *
-			mempool->memblocks_max);
 
 	/* allocate hash array of items */
-	mempool->items_arr =
-		(void **) vmalloc(sizeof(void *) * mempool->items_max);
+	mempool->items_arr = vzalloc(sizeof(void *) * mempool->items_max);
 	if (mempool->items_arr == NULL) {
 		__vxge_hw_mempool_destroy(mempool);
 		status = VXGE_HW_ERR_OUT_OF_MEMORY;
 		mempool = NULL;
 		goto exit;
 	}
-	memset(mempool->items_arr, 0, sizeof(void *) * mempool->items_max);
 
 	/* calculate initial number of memblocks */
 	memblocks_to_allocate = (mempool->items_initial +
@@ -2238,122 +2744,188 @@ exit:
 }
 
 /*
- * vxge_hw_mempool_destroy
+ * __vxge_hw_ring_abort - Returns the RxD
+ * This function terminates the RxDs of ring
  */
-static void __vxge_hw_mempool_destroy(struct vxge_hw_mempool *mempool)
+static enum vxge_hw_status __vxge_hw_ring_abort(struct __vxge_hw_ring *ring)
 {
-	u32 i, j;
-	struct __vxge_hw_device *devh = mempool->devh;
-
-	for (i = 0; i < mempool->memblocks_allocated; i++) {
-		struct vxge_hw_mempool_dma *dma_object;
+	void *rxdh;
+	struct __vxge_hw_channel *channel;
 
-		vxge_assert(mempool->memblocks_arr[i]);
-		vxge_assert(mempool->memblocks_dma_arr + i);
+	channel = &ring->channel;
 
-		dma_object = mempool->memblocks_dma_arr + i;
+	for (;;) {
+		vxge_hw_channel_dtr_try_complete(channel, &rxdh);
 
-		for (j = 0; j < mempool->items_per_memblock; j++) {
-			u32 index = i * mempool->items_per_memblock + j;
+		if (rxdh == NULL)
+			break;
 
-			/* to skip last partially filled(if any) memblock */
-			if (index >= mempool->items_current)
-				break;
-		}
+		vxge_hw_channel_dtr_complete(channel);
 
-		vfree(mempool->memblocks_priv_arr[i]);
+		if (ring->rxd_term)
+			ring->rxd_term(rxdh, VXGE_HW_RXD_STATE_POSTED,
+				channel->userdata);
 
-		__vxge_hw_blockpool_free(devh, mempool->memblocks_arr[i],
-				mempool->memblock_size, dma_object);
+		vxge_hw_channel_dtr_free(channel, rxdh);
 	}
 
-	vfree(mempool->items_arr);
+	return VXGE_HW_OK;
+}
 
-	vfree(mempool->memblocks_dma_arr);
+/*
+ * __vxge_hw_ring_reset - Resets the ring
+ * This function resets the ring during vpath reset operation
+ */
+static enum vxge_hw_status __vxge_hw_ring_reset(struct __vxge_hw_ring *ring)
+{
+	enum vxge_hw_status status = VXGE_HW_OK;
+	struct __vxge_hw_channel *channel;
 
-	vfree(mempool->memblocks_priv_arr);
+	channel = &ring->channel;
 
-	vfree(mempool->memblocks_arr);
+	__vxge_hw_ring_abort(ring);
 
-	vfree(mempool);
+	status = __vxge_hw_channel_reset(channel);
+
+	if (status != VXGE_HW_OK)
+		goto exit;
+
+	if (ring->rxd_init) {
+		status = vxge_hw_ring_replenish(ring);
+		if (status != VXGE_HW_OK)
+			goto exit;
+	}
+exit:
+	return status;
 }
 
 /*
- * __vxge_hw_device_fifo_config_check - Check fifo configuration.
- * Check the fifo configuration
+ * __vxge_hw_ring_delete - Removes the ring
+ * This function freeup the memory pool and removes the ring
  */
 static enum vxge_hw_status
-__vxge_hw_device_fifo_config_check(struct vxge_hw_fifo_config *fifo_config)
+__vxge_hw_ring_delete(struct __vxge_hw_vpath_handle *vp)
 {
-	if ((fifo_config->fifo_blocks < VXGE_HW_MIN_FIFO_BLOCKS) ||
-	     (fifo_config->fifo_blocks > VXGE_HW_MAX_FIFO_BLOCKS))
-		return VXGE_HW_BADCFG_FIFO_BLOCKS;
+	struct __vxge_hw_ring *ring = vp->vpath->ringh;
+
+	__vxge_hw_ring_abort(ring);
+
+	if (ring->mempool)
+		__vxge_hw_mempool_destroy(ring->mempool);
+
+	vp->vpath->ringh = NULL;
+	__vxge_hw_channel_free(&ring->channel);
 
 	return VXGE_HW_OK;
 }
 
 /*
- * __vxge_hw_device_vpath_config_check - Check vpath configuration.
- * Check the vpath configuration
+ * __vxge_hw_ring_create - Create a Ring
+ * This function creates Ring and initializes it.
  */
 static enum vxge_hw_status
-__vxge_hw_device_vpath_config_check(struct vxge_hw_vp_config *vp_config)
+__vxge_hw_ring_create(struct __vxge_hw_vpath_handle *vp,
+		      struct vxge_hw_ring_attr *attr)
 {
-	enum vxge_hw_status status;
+	enum vxge_hw_status status = VXGE_HW_OK;
+	struct __vxge_hw_ring *ring;
+	u32 ring_length;
+	struct vxge_hw_ring_config *config;
+	struct __vxge_hw_device *hldev;
+	u32 vp_id;
+	struct vxge_hw_mempool_cbs ring_mp_callback;
 
-	if ((vp_config->min_bandwidth < VXGE_HW_VPATH_BANDWIDTH_MIN) ||
-		(vp_config->min_bandwidth >
-					VXGE_HW_VPATH_BANDWIDTH_MAX))
-		return VXGE_HW_BADCFG_VPATH_MIN_BANDWIDTH;
+	if ((vp == NULL) || (attr == NULL)) {
+		status = VXGE_HW_FAIL;
+		goto exit;
+	}
 
-	status = __vxge_hw_device_fifo_config_check(&vp_config->fifo);
-	if (status != VXGE_HW_OK)
-		return status;
+	hldev = vp->vpath->hldev;
+	vp_id = vp->vpath->vp_id;
 
-	if ((vp_config->mtu != VXGE_HW_VPATH_USE_FLASH_DEFAULT_INITIAL_MTU) &&
-		((vp_config->mtu < VXGE_HW_VPATH_MIN_INITIAL_MTU) ||
-		(vp_config->mtu > VXGE_HW_VPATH_MAX_INITIAL_MTU)))
-		return VXGE_HW_BADCFG_VPATH_MTU;
+	config = &hldev->config.vp_config[vp_id].ring;
 
-	if ((vp_config->rpa_strip_vlan_tag !=
-		VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_USE_FLASH_DEFAULT) &&
-		(vp_config->rpa_strip_vlan_tag !=
-		VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_ENABLE) &&
-		(vp_config->rpa_strip_vlan_tag !=
-		VXGE_HW_VPATH_RPA_STRIP_VLAN_TAG_DISABLE))
-		return VXGE_HW_BADCFG_VPATH_RPA_STRIP_VLAN_TAG;
+	ring_length = config->ring_blocks *
+			vxge_hw_ring_rxds_per_block_get(config->buffer_mode);
 
-	return VXGE_HW_OK;
-}
+	ring = (struct __vxge_hw_ring *)__vxge_hw_channel_allocate(vp,
+						VXGE_HW_CHANNEL_TYPE_RING,
+						ring_length,
+						attr->per_rxd_space,
+						attr->userdata);
+	if (ring == NULL) {
+		status = VXGE_HW_ERR_OUT_OF_MEMORY;
+		goto exit;
+	}
 
-/*
- * __vxge_hw_device_config_check - Check device configuration.
- * Check the device configuration
- */
-static enum vxge_hw_status
-__vxge_hw_device_config_check(struct vxge_hw_device_config *new_config)
-{
-	u32 i;
-	enum vxge_hw_status status;
+	vp->vpath->ringh = ring;
+	ring->vp_id = vp_id;
+	ring->vp_reg = vp->vpath->vp_reg;
+	ring->common_reg = hldev->common_reg;
+	ring->stats = &vp->vpath->sw_stats->ring_stats;
+	ring->config = config;
+	ring->callback = attr->callback;
+	ring->rxd_init = attr->rxd_init;
+	ring->rxd_term = attr->rxd_term;
+	ring->buffer_mode = config->buffer_mode;
+	ring->rxds_limit = config->rxds_limit;
 
-	if ((new_config->intr_mode != VXGE_HW_INTR_MODE_IRQLINE) &&
-	   (new_config->intr_mode != VXGE_HW_INTR_MODE_MSIX) &&
-	   (new_config->intr_mode != VXGE_HW_INTR_MODE_MSIX_ONE_SHOT) &&
-	   (new_config->intr_mode != VXGE_HW_INTR_MODE_DEF))
-		return VXGE_HW_BADCFG_INTR_MODE;
+	ring->rxd_size = vxge_hw_ring_rxd_size_get(config->buffer_mode);
+	ring->rxd_priv_size =
+		sizeof(struct __vxge_hw_ring_rxd_priv) + attr->per_rxd_space;
+	ring->per_rxd_space = attr->per_rxd_space;
 
-	if ((new_config->rts_mac_en != VXGE_HW_RTS_MAC_DISABLE) &&
-	   (new_config->rts_mac_en != VXGE_HW_RTS_MAC_ENABLE))
-		return VXGE_HW_BADCFG_RTS_MAC_EN;
+	ring->rxd_priv_size =
+		((ring->rxd_priv_size + VXGE_CACHE_LINE_SIZE - 1) /
+		VXGE_CACHE_LINE_SIZE) * VXGE_CACHE_LINE_SIZE;
 
-	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-		status = __vxge_hw_device_vpath_config_check(
-				&new_config->vp_config[i]);
-		if (status != VXGE_HW_OK)
-			return status;
+	/* how many RxDs can fit into one block. Depends on configured
+	 * buffer_mode. */
+	ring->rxds_per_block =
+		vxge_hw_ring_rxds_per_block_get(config->buffer_mode);
+
+	/* calculate actual RxD block private size */
+	ring->rxdblock_priv_size = ring->rxd_priv_size * ring->rxds_per_block;
+	ring_mp_callback.item_func_alloc = __vxge_hw_ring_mempool_item_alloc;
+	ring->mempool = __vxge_hw_mempool_create(hldev,
+				VXGE_HW_BLOCK_SIZE,
+				VXGE_HW_BLOCK_SIZE,
+				ring->rxdblock_priv_size,
+				ring->config->ring_blocks,
+				ring->config->ring_blocks,
+				&ring_mp_callback,
+				ring);
+	if (ring->mempool == NULL) {
+		__vxge_hw_ring_delete(vp);
+		return VXGE_HW_ERR_OUT_OF_MEMORY;
 	}
 
-	return VXGE_HW_OK;
+	status = __vxge_hw_channel_initialize(&ring->channel);
+	if (status != VXGE_HW_OK) {
+		__vxge_hw_ring_delete(vp);
+		goto exit;
+	}
+
+	/* Note:
+	 * Specifying rxd_init callback means two things:
+	 * 1) rxds need to be initialized by driver at channel-open time;
+	 * 2) rxds need to be posted at channel-open time
+	 *    (that's what the initial_replenish() below does)
+	 * Currently we don't have a case when the 1) is done without the 2).
+	 */
+	if (ring->rxd_init) {
+		status = vxge_hw_ring_replenish(ring);
+		if (status != VXGE_HW_OK) {
+			__vxge_hw_ring_delete(vp);
+			goto exit;
+		}
+	}
+
+	/* initial replenish will increment the counter in its post() routine,
+	 * we have to reset it */
+	ring->stats->common_stats.usage_cnt = 0;
+exit:
+	return status;
 }
 
 /*
@@ -2375,7 +2947,6 @@ vxge_hw_device_config_default_get(struct vxge_hw_device_config *device_config)
 	device_config->rts_mac_en =  VXGE_HW_RTS_MAC_DEFAULT;
 
 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-
 		device_config->vp_config[i].vp_id = i;
 
 		device_config->vp_config[i].min_bandwidth =
@@ -2515,61 +3086,6 @@ vxge_hw_device_config_default_get(struct vxge_hw_device_config *device_config)
 }
 
 /*
- * _hw_legacy_swapper_set - Set the swapper bits for the legacy secion.
- * Set the swapper bits appropriately for the lagacy section.
- */
-static enum vxge_hw_status
-__vxge_hw_legacy_swapper_set(struct vxge_hw_legacy_reg __iomem *legacy_reg)
-{
-	u64 val64;
-	enum vxge_hw_status status = VXGE_HW_OK;
-
-	val64 = readq(&legacy_reg->toc_swapper_fb);
-
-	wmb();
-
-	switch (val64) {
-
-	case VXGE_HW_SWAPPER_INITIAL_VALUE:
-		return status;
-
-	case VXGE_HW_SWAPPER_BYTE_SWAPPED_BIT_FLIPPED:
-		writeq(VXGE_HW_SWAPPER_READ_BYTE_SWAP_ENABLE,
-			&legacy_reg->pifm_rd_swap_en);
-		writeq(VXGE_HW_SWAPPER_READ_BIT_FLAP_ENABLE,
-			&legacy_reg->pifm_rd_flip_en);
-		writeq(VXGE_HW_SWAPPER_WRITE_BYTE_SWAP_ENABLE,
-			&legacy_reg->pifm_wr_swap_en);
-		writeq(VXGE_HW_SWAPPER_WRITE_BIT_FLAP_ENABLE,
-			&legacy_reg->pifm_wr_flip_en);
-		break;
-
-	case VXGE_HW_SWAPPER_BYTE_SWAPPED:
-		writeq(VXGE_HW_SWAPPER_READ_BYTE_SWAP_ENABLE,
-			&legacy_reg->pifm_rd_swap_en);
-		writeq(VXGE_HW_SWAPPER_WRITE_BYTE_SWAP_ENABLE,
-			&legacy_reg->pifm_wr_swap_en);
-		break;
-
-	case VXGE_HW_SWAPPER_BIT_FLIPPED:
-		writeq(VXGE_HW_SWAPPER_READ_BIT_FLAP_ENABLE,
-			&legacy_reg->pifm_rd_flip_en);
-		writeq(VXGE_HW_SWAPPER_WRITE_BIT_FLAP_ENABLE,
-			&legacy_reg->pifm_wr_flip_en);
-		break;
-	}
-
-	wmb();
-
-	val64 = readq(&legacy_reg->toc_swapper_fb);
-
-	if (val64 != VXGE_HW_SWAPPER_INITIAL_VALUE)
-		status = VXGE_HW_ERR_SWAPPER_CTRL;
-
-	return status;
-}
-
-/*
  * __vxge_hw_vpath_swapper_set - Set the swapper bits for the vpath.
  * Set the swapper bits appropriately for the vpath.
  */
@@ -2593,9 +3109,8 @@ __vxge_hw_vpath_swapper_set(struct vxge_hw_vpath_reg __iomem *vpath_reg)
  * Set the swapper bits appropriately for the vpath.
  */
 static enum vxge_hw_status
-__vxge_hw_kdfc_swapper_set(
-	struct vxge_hw_legacy_reg __iomem *legacy_reg,
-	struct vxge_hw_vpath_reg __iomem *vpath_reg)
+__vxge_hw_kdfc_swapper_set(struct vxge_hw_legacy_reg __iomem *legacy_reg,
+			   struct vxge_hw_vpath_reg __iomem *vpath_reg)
 {
 	u64 val64;
 
@@ -2845,6 +3360,69 @@ exit:
 }
 
 /*
+ * __vxge_hw_fifo_abort - Returns the TxD
+ * This function terminates the TxDs of fifo
+ */
+static enum vxge_hw_status __vxge_hw_fifo_abort(struct __vxge_hw_fifo *fifo)
+{
+	void *txdlh;
+
+	for (;;) {
+		vxge_hw_channel_dtr_try_complete(&fifo->channel, &txdlh);
+
+		if (txdlh == NULL)
+			break;
+
+		vxge_hw_channel_dtr_complete(&fifo->channel);
+
+		if (fifo->txdl_term) {
+			fifo->txdl_term(txdlh,
+			VXGE_HW_TXDL_STATE_POSTED,
+			fifo->channel.userdata);
+		}
+
+		vxge_hw_channel_dtr_free(&fifo->channel, txdlh);
+	}
+
+	return VXGE_HW_OK;
+}
+
+/*
+ * __vxge_hw_fifo_reset - Resets the fifo
+ * This function resets the fifo during vpath reset operation
+ */
+static enum vxge_hw_status __vxge_hw_fifo_reset(struct __vxge_hw_fifo *fifo)
+{
+	enum vxge_hw_status status = VXGE_HW_OK;
+
+	__vxge_hw_fifo_abort(fifo);
+	status = __vxge_hw_channel_reset(&fifo->channel);
+
+	return status;
+}
+
+/*
+ * __vxge_hw_fifo_delete - Removes the FIFO
+ * This function freeup the memory pool and removes the FIFO
+ */
+static enum vxge_hw_status
+__vxge_hw_fifo_delete(struct __vxge_hw_vpath_handle *vp)
+{
+	struct __vxge_hw_fifo *fifo = vp->vpath->fifoh;
+
+	__vxge_hw_fifo_abort(fifo);
+
+	if (fifo->mempool)
+		__vxge_hw_mempool_destroy(fifo->mempool);
+
+	vp->vpath->fifoh = NULL;
+
+	__vxge_hw_channel_free(&fifo->channel);
+
+	return VXGE_HW_OK;
+}
+
+/*
  * __vxge_hw_fifo_mempool_item_alloc - Allocate List blocks for TxD
  * list callback
  * This function is callback passed to __vxge_hw_mempool_create to create memory
@@ -3009,69 +3587,6 @@ exit:
 }
 
 /*
- * __vxge_hw_fifo_abort - Returns the TxD
- * This function terminates the TxDs of fifo
- */
-static enum vxge_hw_status __vxge_hw_fifo_abort(struct __vxge_hw_fifo *fifo)
-{
-	void *txdlh;
-
-	for (;;) {
-		vxge_hw_channel_dtr_try_complete(&fifo->channel, &txdlh);
-
-		if (txdlh == NULL)
-			break;
-
-		vxge_hw_channel_dtr_complete(&fifo->channel);
-
-		if (fifo->txdl_term) {
-			fifo->txdl_term(txdlh,
-			VXGE_HW_TXDL_STATE_POSTED,
-			fifo->channel.userdata);
-		}
-
-		vxge_hw_channel_dtr_free(&fifo->channel, txdlh);
-	}
-
-	return VXGE_HW_OK;
-}
-
-/*
- * __vxge_hw_fifo_reset - Resets the fifo
- * This function resets the fifo during vpath reset operation
- */
-static enum vxge_hw_status __vxge_hw_fifo_reset(struct __vxge_hw_fifo *fifo)
-{
-	enum vxge_hw_status status = VXGE_HW_OK;
-
-	__vxge_hw_fifo_abort(fifo);
-	status = __vxge_hw_channel_reset(&fifo->channel);
-
-	return status;
-}
-
-/*
- * __vxge_hw_fifo_delete - Removes the FIFO
- * This function freeup the memory pool and removes the FIFO
- */
-static enum vxge_hw_status
-__vxge_hw_fifo_delete(struct __vxge_hw_vpath_handle *vp)
-{
-	struct __vxge_hw_fifo *fifo = vp->vpath->fifoh;
-
-	__vxge_hw_fifo_abort(fifo);
-
-	if (fifo->mempool)
-		__vxge_hw_mempool_destroy(fifo->mempool);
-
-	vp->vpath->fifoh = NULL;
-
-	__vxge_hw_channel_free(&fifo->channel);
-
-	return VXGE_HW_OK;
-}
-
-/*
  * __vxge_hw_vpath_pci_read - Read the content of given address
  *                          in pci config space.
  * Read from the vpath pci config space.
@@ -3802,10 +4317,10 @@ __vxge_hw_vpath_tim_configure(struct __vxge_hw_device *hldev, u32 vp_id)
 	vp_reg = vpath->vp_reg;
 	config = vpath->vp_config;
 
-	writeq((u64)0, &vp_reg->tim_dest_addr);
-	writeq((u64)0, &vp_reg->tim_vpath_map);
-	writeq((u64)0, &vp_reg->tim_bitmap);
-	writeq((u64)0, &vp_reg->tim_remap);
+	writeq(0, &vp_reg->tim_dest_addr);
+	writeq(0, &vp_reg->tim_vpath_map);
+	writeq(0, &vp_reg->tim_bitmap);
+	writeq(0, &vp_reg->tim_remap);
 
 	if (config->ring.enable == VXGE_HW_RING_ENABLE)
 		writeq(VXGE_HW_TIM_RING_ASSN_INT_NUM(
@@ -3907,8 +4422,7 @@ __vxge_hw_vpath_tim_configure(struct __vxge_hw_device *hldev, u32 vp_id)
 
 		if (config->tti.util_sel != VXGE_HW_USE_FLASH_DEFAULT) {
 			val64 &= ~VXGE_HW_TIM_CFG3_INT_NUM_UTIL_SEL(0x3f);
-			val64 |= VXGE_HW_TIM_CFG3_INT_NUM_UTIL_SEL(
-					config->tti.util_sel);
+			val64 |= VXGE_HW_TIM_CFG3_INT_NUM_UTIL_SEL(vp_id);
 		}
 
 		if (config->tti.ltimer_val != VXGE_HW_USE_FLASH_DEFAULT) {
@@ -4012,8 +4526,7 @@ __vxge_hw_vpath_tim_configure(struct __vxge_hw_device *hldev, u32 vp_id)
 
 		if (config->rti.util_sel != VXGE_HW_USE_FLASH_DEFAULT) {
 			val64 &= ~VXGE_HW_TIM_CFG3_INT_NUM_UTIL_SEL(0x3f);
-			val64 |= VXGE_HW_TIM_CFG3_INT_NUM_UTIL_SEL(
-					config->rti.util_sel);
+			val64 |= VXGE_HW_TIM_CFG3_INT_NUM_UTIL_SEL(vp_id);
 		}
 
 		if (config->rti.ltimer_val != VXGE_HW_USE_FLASH_DEFAULT) {
@@ -4034,11 +4547,15 @@ __vxge_hw_vpath_tim_configure(struct __vxge_hw_device *hldev, u32 vp_id)
 	writeq(val64, &vp_reg->tim_cfg2_int_num[VXGE_HW_VPATH_INTR_BMAP]);
 	writeq(val64, &vp_reg->tim_cfg3_int_num[VXGE_HW_VPATH_INTR_BMAP]);
 
+	val64 = VXGE_HW_TIM_WRKLD_CLC_WRKLD_EVAL_PRD(150);
+	val64 |= VXGE_HW_TIM_WRKLD_CLC_WRKLD_EVAL_DIV(0);
+	val64 |= VXGE_HW_TIM_WRKLD_CLC_CNT_RX_TX(3);
+	writeq(val64, &vp_reg->tim_wrkld_clc);
+
 	return status;
 }
 
-void
-vxge_hw_vpath_tti_ci_set(struct __vxge_hw_device *hldev, u32 vp_id)
+void vxge_hw_vpath_tti_ci_set(struct __vxge_hw_device *hldev, u32 vp_id)
 {
 	struct __vxge_hw_virtualpath *vpath;
 	struct vxge_hw_vpath_reg __iomem *vp_reg;
@@ -4049,17 +4566,15 @@ vxge_hw_vpath_tti_ci_set(struct __vxge_hw_device *hldev, u32 vp_id)
 	vp_reg = vpath->vp_reg;
 	config = vpath->vp_config;
 
-	if (config->fifo.enable == VXGE_HW_FIFO_ENABLE) {
+	if (config->fifo.enable == VXGE_HW_FIFO_ENABLE &&
+	    config->tti.timer_ci_en != VXGE_HW_TIM_TIMER_CI_ENABLE) {
+		config->tti.timer_ci_en = VXGE_HW_TIM_TIMER_CI_ENABLE;
 		val64 = readq(&vp_reg->tim_cfg1_int_num[VXGE_HW_VPATH_INTR_TX]);
-
-		if (config->tti.timer_ci_en != VXGE_HW_TIM_TIMER_CI_ENABLE) {
-			config->tti.timer_ci_en = VXGE_HW_TIM_TIMER_CI_ENABLE;
-			val64 |= VXGE_HW_TIM_CFG1_INT_NUM_TIMER_CI;
-			writeq(val64,
-			&vp_reg->tim_cfg1_int_num[VXGE_HW_VPATH_INTR_TX]);
-		}
+		val64 |= VXGE_HW_TIM_CFG1_INT_NUM_TIMER_CI;
+		writeq(val64, &vp_reg->tim_cfg1_int_num[VXGE_HW_VPATH_INTR_TX]);
 	}
 }
+
 /*
  * __vxge_hw_vpath_initialize
  * This routine is the final phase of init which initializes the
@@ -4083,22 +4598,18 @@ __vxge_hw_vpath_initialize(struct __vxge_hw_device *hldev, u32 vp_id)
 	vp_reg = vpath->vp_reg;
 
 	status =  __vxge_hw_vpath_swapper_set(vpath->vp_reg);
-
 	if (status != VXGE_HW_OK)
 		goto exit;
 
 	status =  __vxge_hw_vpath_mac_configure(hldev, vp_id);
-
 	if (status != VXGE_HW_OK)
 		goto exit;
 
 	status =  __vxge_hw_vpath_kdfc_configure(hldev, vp_id);
-
 	if (status != VXGE_HW_OK)
 		goto exit;
 
 	status = __vxge_hw_vpath_tim_configure(hldev, vp_id);
-
 	if (status != VXGE_HW_OK)
 		goto exit;
 
@@ -4106,7 +4617,6 @@ __vxge_hw_vpath_initialize(struct __vxge_hw_device *hldev, u32 vp_id)
 
 	/* Get MRRS value from device control */
 	status  = __vxge_hw_vpath_pci_read(vpath, 1, 0x78, &val32);
-
 	if (status == VXGE_HW_OK) {
 		val32 = (val32 & VXGE_HW_PCI_EXP_DEVCTL_READRQ) >> 12;
 		val64 &=
@@ -4130,6 +4640,28 @@ exit:
 }
 
 /*
+ * __vxge_hw_vp_terminate - Terminate Virtual Path structure
+ * This routine closes all channels it opened and freeup memory
+ */
+static void __vxge_hw_vp_terminate(struct __vxge_hw_device *hldev, u32 vp_id)
+{
+	struct __vxge_hw_virtualpath *vpath;
+
+	vpath = &hldev->virtual_paths[vp_id];
+
+	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN)
+		goto exit;
+
+	VXGE_HW_DEVICE_TIM_INT_MASK_RESET(vpath->hldev->tim_int_mask0,
+		vpath->hldev->tim_int_mask1, vpath->vp_id);
+	hldev->stats.hw_dev_info_stats.vpath_info[vpath->vp_id] = NULL;
+
+	memset(vpath, 0, sizeof(struct __vxge_hw_virtualpath));
+exit:
+	return;
+}
+
+/*
  * __vxge_hw_vp_initialize - Initialize Virtual Path structure
  * This routine is the initial phase of init which resets the vpath and
  * initializes the software support structures.
@@ -4185,29 +4717,6 @@ exit:
 }
 
 /*
- * __vxge_hw_vp_terminate - Terminate Virtual Path structure
- * This routine closes all channels it opened and freeup memory
- */
-static void
-__vxge_hw_vp_terminate(struct __vxge_hw_device *hldev, u32 vp_id)
-{
-	struct __vxge_hw_virtualpath *vpath;
-
-	vpath = &hldev->virtual_paths[vp_id];
-
-	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN)
-		goto exit;
-
-	VXGE_HW_DEVICE_TIM_INT_MASK_RESET(vpath->hldev->tim_int_mask0,
-		vpath->hldev->tim_int_mask1, vpath->vp_id);
-	hldev->stats.hw_dev_info_stats.vpath_info[vpath->vp_id] = NULL;
-
-	memset(vpath, 0, sizeof(struct __vxge_hw_virtualpath));
-exit:
-	return;
-}
-
-/*
  * vxge_hw_vpath_mtu_set - Set MTU.
  * Set new MTU value. Example, to use jumbo frames:
  * vxge_hw_vpath_mtu_set(my_device, 9600);
@@ -4244,6 +4753,64 @@ exit:
 }
 
 /*
+ * vxge_hw_vpath_stats_enable - Enable vpath h/wstatistics.
+ * Enable the DMA vpath statistics. The function is to be called to re-enable
+ * the adapter to update stats into the host memory
+ */
+static enum vxge_hw_status
+vxge_hw_vpath_stats_enable(struct __vxge_hw_vpath_handle *vp)
+{
+	enum vxge_hw_status status = VXGE_HW_OK;
+	struct __vxge_hw_virtualpath *vpath;
+
+	vpath = vp->vpath;
+
+	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN) {
+		status = VXGE_HW_ERR_VPATH_NOT_OPEN;
+		goto exit;
+	}
+
+	memcpy(vpath->hw_stats_sav, vpath->hw_stats,
+			sizeof(struct vxge_hw_vpath_stats_hw_info));
+
+	status = __vxge_hw_vpath_stats_get(vpath, vpath->hw_stats);
+exit:
+	return status;
+}
+
+/*
+ * __vxge_hw_blockpool_block_allocate - Allocates a block from block pool
+ * This function allocates a block from block pool or from the system
+ */
+static struct __vxge_hw_blockpool_entry *
+__vxge_hw_blockpool_block_allocate(struct __vxge_hw_device *devh, u32 size)
+{
+	struct __vxge_hw_blockpool_entry *entry = NULL;
+	struct __vxge_hw_blockpool  *blockpool;
+
+	blockpool = &devh->block_pool;
+
+	if (size == blockpool->block_size) {
+
+		if (!list_empty(&blockpool->free_block_list))
+			entry = (struct __vxge_hw_blockpool_entry *)
+				list_first_entry(&blockpool->free_block_list,
+					struct __vxge_hw_blockpool_entry,
+					item);
+
+		if (entry != NULL) {
+			list_del(&entry->item);
+			blockpool->pool_size--;
+		}
+	}
+
+	if (entry != NULL)
+		__vxge_hw_blockpool_blocks_add(blockpool);
+
+	return entry;
+}
+
+/*
  * vxge_hw_vpath_open - Open a virtual path on a given adapter
  * This function is used to open access to virtual path of an
  * adapter for offload, GRO operations. This function returns
@@ -4267,19 +4834,15 @@ vxge_hw_vpath_open(struct __vxge_hw_device *hldev,
 
 	status = __vxge_hw_vp_initialize(hldev, attr->vp_id,
 			&hldev->config.vp_config[attr->vp_id]);
-
 	if (status != VXGE_HW_OK)
 		goto vpath_open_exit1;
 
-	vp = (struct __vxge_hw_vpath_handle *)
-		vmalloc(sizeof(struct __vxge_hw_vpath_handle));
+	vp = vzalloc(sizeof(struct __vxge_hw_vpath_handle));
 	if (vp == NULL) {
 		status = VXGE_HW_ERR_OUT_OF_MEMORY;
 		goto vpath_open_exit2;
 	}
 
-	memset(vp, 0, sizeof(struct __vxge_hw_vpath_handle));
-
 	vp->vpath = vpath;
 
 	if (vpath->vp_config->fifo.enable == VXGE_HW_FIFO_ENABLE) {
@@ -4302,7 +4865,6 @@ vxge_hw_vpath_open(struct __vxge_hw_device *hldev,
 
 	vpath->stats_block = __vxge_hw_blockpool_block_allocate(hldev,
 				VXGE_HW_BLOCK_SIZE);
-
 	if (vpath->stats_block == NULL) {
 		status = VXGE_HW_ERR_OUT_OF_MEMORY;
 		goto vpath_open_exit8;
@@ -4361,8 +4923,7 @@ vpath_open_exit1:
  * This function is used to close access to virtual path opened
  * earlier.
  */
-void
-vxge_hw_vpath_rx_doorbell_init(struct __vxge_hw_vpath_handle *vp)
+void vxge_hw_vpath_rx_doorbell_init(struct __vxge_hw_vpath_handle *vp)
 {
 	struct __vxge_hw_virtualpath *vpath = vp->vpath;
 	struct __vxge_hw_ring *ring = vpath->ringh;
@@ -4398,6 +4959,29 @@ vxge_hw_vpath_rx_doorbell_init(struct __vxge_hw_vpath_handle *vp)
 }
 
 /*
+ * __vxge_hw_blockpool_block_free - Frees a block from block pool
+ * @devh: Hal device
+ * @entry: Entry of block to be freed
+ *
+ * This function frees a block from block pool
+ */
+static void
+__vxge_hw_blockpool_block_free(struct __vxge_hw_device *devh,
+			       struct __vxge_hw_blockpool_entry *entry)
+{
+	struct __vxge_hw_blockpool  *blockpool;
+
+	blockpool = &devh->block_pool;
+
+	if (entry->length == blockpool->block_size) {
+		list_add(&entry->item, &blockpool->free_block_list);
+		blockpool->pool_size++;
+	}
+
+	__vxge_hw_blockpool_blocks_remove(blockpool);
+}
+
+/*
  * vxge_hw_vpath_close - Close the handle got from previous vpath (vpath) open
  * This function is used to close access to virtual path opened
  * earlier.
@@ -4548,730 +5132,3 @@ vxge_hw_vpath_enable(struct __vxge_hw_vpath_handle *vp)
 	__vxge_hw_pio_mem_write32_upper((u32)vxge_bVALn(val64, 0, 32),
 		&hldev->common_reg->cmn_rsthdlr_cfg1);
 }
-
-/*
- * vxge_hw_vpath_stats_enable - Enable vpath h/wstatistics.
- * Enable the DMA vpath statistics. The function is to be called to re-enable
- * the adapter to update stats into the host memory
- */
-static enum vxge_hw_status
-vxge_hw_vpath_stats_enable(struct __vxge_hw_vpath_handle *vp)
-{
-	enum vxge_hw_status status = VXGE_HW_OK;
-	struct __vxge_hw_virtualpath *vpath;
-
-	vpath = vp->vpath;
-
-	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN) {
-		status = VXGE_HW_ERR_VPATH_NOT_OPEN;
-		goto exit;
-	}
-
-	memcpy(vpath->hw_stats_sav, vpath->hw_stats,
-			sizeof(struct vxge_hw_vpath_stats_hw_info));
-
-	status = __vxge_hw_vpath_stats_get(vpath, vpath->hw_stats);
-exit:
-	return status;
-}
-
-/*
- * __vxge_hw_vpath_stats_access - Get the statistics from the given location
- *                           and offset and perform an operation
- */
-static enum vxge_hw_status
-__vxge_hw_vpath_stats_access(struct __vxge_hw_virtualpath *vpath,
-			     u32 operation, u32 offset, u64 *stat)
-{
-	u64 val64;
-	enum vxge_hw_status status = VXGE_HW_OK;
-	struct vxge_hw_vpath_reg __iomem *vp_reg;
-
-	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN) {
-		status = VXGE_HW_ERR_VPATH_NOT_OPEN;
-		goto vpath_stats_access_exit;
-	}
-
-	vp_reg = vpath->vp_reg;
-
-	val64 =  VXGE_HW_XMAC_STATS_ACCESS_CMD_OP(operation) |
-		 VXGE_HW_XMAC_STATS_ACCESS_CMD_STROBE |
-		 VXGE_HW_XMAC_STATS_ACCESS_CMD_OFFSET_SEL(offset);
-
-	status = __vxge_hw_pio_mem_write64(val64,
-				&vp_reg->xmac_stats_access_cmd,
-				VXGE_HW_XMAC_STATS_ACCESS_CMD_STROBE,
-				vpath->hldev->config.device_poll_millis);
-
-	if ((status == VXGE_HW_OK) && (operation == VXGE_HW_STATS_OP_READ))
-		*stat = readq(&vp_reg->xmac_stats_access_data);
-	else
-		*stat = 0;
-
-vpath_stats_access_exit:
-	return status;
-}
-
-/*
- * __vxge_hw_vpath_xmac_tx_stats_get - Get the TX Statistics of a vpath
- */
-static enum vxge_hw_status
-__vxge_hw_vpath_xmac_tx_stats_get(
-	struct __vxge_hw_virtualpath *vpath,
-	struct vxge_hw_xmac_vpath_tx_stats *vpath_tx_stats)
-{
-	u64 *val64;
-	int i;
-	u32 offset = VXGE_HW_STATS_VPATH_TX_OFFSET;
-	enum vxge_hw_status status = VXGE_HW_OK;
-
-	val64 = (u64 *) vpath_tx_stats;
-
-	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN) {
-		status = VXGE_HW_ERR_VPATH_NOT_OPEN;
-		goto exit;
-	}
-
-	for (i = 0; i < sizeof(struct vxge_hw_xmac_vpath_tx_stats) / 8; i++) {
-		status = __vxge_hw_vpath_stats_access(vpath,
-					VXGE_HW_STATS_OP_READ,
-					offset, val64);
-		if (status != VXGE_HW_OK)
-			goto exit;
-		offset++;
-		val64++;
-	}
-exit:
-	return status;
-}
-
-/*
- * __vxge_hw_vpath_xmac_rx_stats_get - Get the RX Statistics of a vpath
- */
-static enum vxge_hw_status
-__vxge_hw_vpath_xmac_rx_stats_get(struct __vxge_hw_virtualpath *vpath,
-				  struct vxge_hw_xmac_vpath_rx_stats *vpath_rx_stats)
-{
-	u64 *val64;
-	enum vxge_hw_status status = VXGE_HW_OK;
-	int i;
-	u32 offset = VXGE_HW_STATS_VPATH_RX_OFFSET;
-	val64 = (u64 *) vpath_rx_stats;
-
-	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN) {
-		status = VXGE_HW_ERR_VPATH_NOT_OPEN;
-		goto exit;
-	}
-	for (i = 0; i < sizeof(struct vxge_hw_xmac_vpath_rx_stats) / 8; i++) {
-		status = __vxge_hw_vpath_stats_access(vpath,
-					VXGE_HW_STATS_OP_READ,
-					offset >> 3, val64);
-		if (status != VXGE_HW_OK)
-			goto exit;
-
-		offset += 8;
-		val64++;
-	}
-exit:
-	return status;
-}
-
-/*
- * __vxge_hw_vpath_stats_get - Get the vpath hw statistics.
- */
-static enum vxge_hw_status
-__vxge_hw_vpath_stats_get(struct __vxge_hw_virtualpath *vpath,
-			  struct vxge_hw_vpath_stats_hw_info *hw_stats)
-{
-	u64 val64;
-	enum vxge_hw_status status = VXGE_HW_OK;
-	struct vxge_hw_vpath_reg __iomem *vp_reg;
-
-	if (vpath->vp_open == VXGE_HW_VP_NOT_OPEN) {
-		status = VXGE_HW_ERR_VPATH_NOT_OPEN;
-		goto exit;
-	}
-	vp_reg = vpath->vp_reg;
-
-	val64 = readq(&vp_reg->vpath_debug_stats0);
-	hw_stats->ini_num_mwr_sent =
-		(u32)VXGE_HW_VPATH_DEBUG_STATS0_GET_INI_NUM_MWR_SENT(val64);
-
-	val64 = readq(&vp_reg->vpath_debug_stats1);
-	hw_stats->ini_num_mrd_sent =
-		(u32)VXGE_HW_VPATH_DEBUG_STATS1_GET_INI_NUM_MRD_SENT(val64);
-
-	val64 = readq(&vp_reg->vpath_debug_stats2);
-	hw_stats->ini_num_cpl_rcvd =
-		(u32)VXGE_HW_VPATH_DEBUG_STATS2_GET_INI_NUM_CPL_RCVD(val64);
-
-	val64 = readq(&vp_reg->vpath_debug_stats3);
-	hw_stats->ini_num_mwr_byte_sent =
-		VXGE_HW_VPATH_DEBUG_STATS3_GET_INI_NUM_MWR_BYTE_SENT(val64);
-
-	val64 = readq(&vp_reg->vpath_debug_stats4);
-	hw_stats->ini_num_cpl_byte_rcvd =
-		VXGE_HW_VPATH_DEBUG_STATS4_GET_INI_NUM_CPL_BYTE_RCVD(val64);
-
-	val64 = readq(&vp_reg->vpath_debug_stats5);
-	hw_stats->wrcrdtarb_xoff =
-		(u32)VXGE_HW_VPATH_DEBUG_STATS5_GET_WRCRDTARB_XOFF(val64);
-
-	val64 = readq(&vp_reg->vpath_debug_stats6);
-	hw_stats->rdcrdtarb_xoff =
-		(u32)VXGE_HW_VPATH_DEBUG_STATS6_GET_RDCRDTARB_XOFF(val64);
-
-	val64 = readq(&vp_reg->vpath_genstats_count01);
-	hw_stats->vpath_genstats_count0 =
-	(u32)VXGE_HW_VPATH_GENSTATS_COUNT01_GET_PPIF_VPATH_GENSTATS_COUNT0(
-		val64);
-
-	val64 = readq(&vp_reg->vpath_genstats_count01);
-	hw_stats->vpath_genstats_count1 =
-	(u32)VXGE_HW_VPATH_GENSTATS_COUNT01_GET_PPIF_VPATH_GENSTATS_COUNT1(
-		val64);
-
-	val64 = readq(&vp_reg->vpath_genstats_count23);
-	hw_stats->vpath_genstats_count2 =
-	(u32)VXGE_HW_VPATH_GENSTATS_COUNT23_GET_PPIF_VPATH_GENSTATS_COUNT2(
-		val64);
-
-	val64 = readq(&vp_reg->vpath_genstats_count01);
-	hw_stats->vpath_genstats_count3 =
-	(u32)VXGE_HW_VPATH_GENSTATS_COUNT23_GET_PPIF_VPATH_GENSTATS_COUNT3(
-		val64);
-
-	val64 = readq(&vp_reg->vpath_genstats_count4);
-	hw_stats->vpath_genstats_count4 =
-	(u32)VXGE_HW_VPATH_GENSTATS_COUNT4_GET_PPIF_VPATH_GENSTATS_COUNT4(
-		val64);
-
-	val64 = readq(&vp_reg->vpath_genstats_count5);
-	hw_stats->vpath_genstats_count5 =
-	(u32)VXGE_HW_VPATH_GENSTATS_COUNT5_GET_PPIF_VPATH_GENSTATS_COUNT5(
-		val64);
-
-	status = __vxge_hw_vpath_xmac_tx_stats_get(vpath, &hw_stats->tx_stats);
-	if (status != VXGE_HW_OK)
-		goto exit;
-
-	status = __vxge_hw_vpath_xmac_rx_stats_get(vpath, &hw_stats->rx_stats);
-	if (status != VXGE_HW_OK)
-		goto exit;
-
-	VXGE_HW_VPATH_STATS_PIO_READ(
-		VXGE_HW_STATS_VPATH_PROG_EVENT_VNUM0_OFFSET);
-
-	hw_stats->prog_event_vnum0 =
-			(u32)VXGE_HW_STATS_GET_VPATH_PROG_EVENT_VNUM0(val64);
-
-	hw_stats->prog_event_vnum1 =
-			(u32)VXGE_HW_STATS_GET_VPATH_PROG_EVENT_VNUM1(val64);
-
-	VXGE_HW_VPATH_STATS_PIO_READ(
-		VXGE_HW_STATS_VPATH_PROG_EVENT_VNUM2_OFFSET);
-
-	hw_stats->prog_event_vnum2 =
-			(u32)VXGE_HW_STATS_GET_VPATH_PROG_EVENT_VNUM2(val64);
-
-	hw_stats->prog_event_vnum3 =
-			(u32)VXGE_HW_STATS_GET_VPATH_PROG_EVENT_VNUM3(val64);
-
-	val64 = readq(&vp_reg->rx_multi_cast_stats);
-	hw_stats->rx_multi_cast_frame_discard =
-		(u16)VXGE_HW_RX_MULTI_CAST_STATS_GET_FRAME_DISCARD(val64);
-
-	val64 = readq(&vp_reg->rx_frm_transferred);
-	hw_stats->rx_frm_transferred =
-		(u32)VXGE_HW_RX_FRM_TRANSFERRED_GET_RX_FRM_TRANSFERRED(val64);
-
-	val64 = readq(&vp_reg->rxd_returned);
-	hw_stats->rxd_returned =
-		(u16)VXGE_HW_RXD_RETURNED_GET_RXD_RETURNED(val64);
-
-	val64 = readq(&vp_reg->dbg_stats_rx_mpa);
-	hw_stats->rx_mpa_len_fail_frms =
-		(u16)VXGE_HW_DBG_STATS_GET_RX_MPA_LEN_FAIL_FRMS(val64);
-	hw_stats->rx_mpa_mrk_fail_frms =
-		(u16)VXGE_HW_DBG_STATS_GET_RX_MPA_MRK_FAIL_FRMS(val64);
-	hw_stats->rx_mpa_crc_fail_frms =
-		(u16)VXGE_HW_DBG_STATS_GET_RX_MPA_CRC_FAIL_FRMS(val64);
-
-	val64 = readq(&vp_reg->dbg_stats_rx_fau);
-	hw_stats->rx_permitted_frms =
-		(u16)VXGE_HW_DBG_STATS_GET_RX_FAU_RX_PERMITTED_FRMS(val64);
-	hw_stats->rx_vp_reset_discarded_frms =
-	(u16)VXGE_HW_DBG_STATS_GET_RX_FAU_RX_VP_RESET_DISCARDED_FRMS(val64);
-	hw_stats->rx_wol_frms =
-		(u16)VXGE_HW_DBG_STATS_GET_RX_FAU_RX_WOL_FRMS(val64);
-
-	val64 = readq(&vp_reg->tx_vp_reset_discarded_frms);
-	hw_stats->tx_vp_reset_discarded_frms =
-	(u16)VXGE_HW_TX_VP_RESET_DISCARDED_FRMS_GET_TX_VP_RESET_DISCARDED_FRMS(
-		val64);
-exit:
-	return status;
-}
-
-
-static void vxge_os_dma_malloc_async(struct pci_dev *pdev, void *devh,
-					unsigned long size)
-{
-	gfp_t flags;
-	void *vaddr;
-
-	if (in_interrupt())
-		flags = GFP_ATOMIC | GFP_DMA;
-	else
-		flags = GFP_KERNEL | GFP_DMA;
-
-	vaddr = kmalloc((size), flags);
-
-	vxge_hw_blockpool_block_add(devh, vaddr, size, pdev, pdev);
-}
-
-static void vxge_os_dma_free(struct pci_dev *pdev, const void *vaddr,
-			     struct pci_dev **p_dma_acch)
-{
-	unsigned long misaligned = *(unsigned long *)p_dma_acch;
-	u8 *tmp = (u8 *)vaddr;
-	tmp -= misaligned;
-	kfree((void *)tmp);
-}
-
-/*
- * __vxge_hw_blockpool_create - Create block pool
- */
-
-static enum vxge_hw_status
-__vxge_hw_blockpool_create(struct __vxge_hw_device *hldev,
-			   struct __vxge_hw_blockpool *blockpool,
-			   u32 pool_size,
-			   u32 pool_max)
-{
-	u32 i;
-	struct __vxge_hw_blockpool_entry *entry = NULL;
-	void *memblock;
-	dma_addr_t dma_addr;
-	struct pci_dev *dma_handle;
-	struct pci_dev *acc_handle;
-	enum vxge_hw_status status = VXGE_HW_OK;
-
-	if (blockpool == NULL) {
-		status = VXGE_HW_FAIL;
-		goto blockpool_create_exit;
-	}
-
-	blockpool->hldev = hldev;
-	blockpool->block_size = VXGE_HW_BLOCK_SIZE;
-	blockpool->pool_size = 0;
-	blockpool->pool_max = pool_max;
-	blockpool->req_out = 0;
-
-	INIT_LIST_HEAD(&blockpool->free_block_list);
-	INIT_LIST_HEAD(&blockpool->free_entry_list);
-
-	for (i = 0; i < pool_size + pool_max; i++) {
-		entry = kzalloc(sizeof(struct __vxge_hw_blockpool_entry),
-				GFP_KERNEL);
-		if (entry == NULL) {
-			__vxge_hw_blockpool_destroy(blockpool);
-			status = VXGE_HW_ERR_OUT_OF_MEMORY;
-			goto blockpool_create_exit;
-		}
-		list_add(&entry->item, &blockpool->free_entry_list);
-	}
-
-	for (i = 0; i < pool_size; i++) {
-
-		memblock = vxge_os_dma_malloc(
-				hldev->pdev,
-				VXGE_HW_BLOCK_SIZE,
-				&dma_handle,
-				&acc_handle);
-
-		if (memblock == NULL) {
-			__vxge_hw_blockpool_destroy(blockpool);
-			status = VXGE_HW_ERR_OUT_OF_MEMORY;
-			goto blockpool_create_exit;
-		}
-
-		dma_addr = pci_map_single(hldev->pdev, memblock,
-				VXGE_HW_BLOCK_SIZE, PCI_DMA_BIDIRECTIONAL);
-
-		if (unlikely(pci_dma_mapping_error(hldev->pdev,
-				dma_addr))) {
-
-			vxge_os_dma_free(hldev->pdev, memblock, &acc_handle);
-			__vxge_hw_blockpool_destroy(blockpool);
-			status = VXGE_HW_ERR_OUT_OF_MEMORY;
-			goto blockpool_create_exit;
-		}
-
-		if (!list_empty(&blockpool->free_entry_list))
-			entry = (struct __vxge_hw_blockpool_entry *)
-				list_first_entry(&blockpool->free_entry_list,
-					struct __vxge_hw_blockpool_entry,
-					item);
-
-		if (entry == NULL)
-			entry =
-			    kzalloc(sizeof(struct __vxge_hw_blockpool_entry),
-					GFP_KERNEL);
-		if (entry != NULL) {
-			list_del(&entry->item);
-			entry->length = VXGE_HW_BLOCK_SIZE;
-			entry->memblock = memblock;
-			entry->dma_addr = dma_addr;
-			entry->acc_handle = acc_handle;
-			entry->dma_handle = dma_handle;
-			list_add(&entry->item,
-					  &blockpool->free_block_list);
-			blockpool->pool_size++;
-		} else {
-			__vxge_hw_blockpool_destroy(blockpool);
-			status = VXGE_HW_ERR_OUT_OF_MEMORY;
-			goto blockpool_create_exit;
-		}
-	}
-
-blockpool_create_exit:
-	return status;
-}
-
-/*
- * __vxge_hw_blockpool_destroy - Deallocates the block pool
- */
-
-static void __vxge_hw_blockpool_destroy(struct __vxge_hw_blockpool *blockpool)
-{
-
-	struct __vxge_hw_device *hldev;
-	struct list_head *p, *n;
-	u16 ret;
-
-	if (blockpool == NULL) {
-		ret = 1;
-		goto exit;
-	}
-
-	hldev = blockpool->hldev;
-
-	list_for_each_safe(p, n, &blockpool->free_block_list) {
-
-		pci_unmap_single(hldev->pdev,
-			((struct __vxge_hw_blockpool_entry *)p)->dma_addr,
-			((struct __vxge_hw_blockpool_entry *)p)->length,
-			PCI_DMA_BIDIRECTIONAL);
-
-		vxge_os_dma_free(hldev->pdev,
-			((struct __vxge_hw_blockpool_entry *)p)->memblock,
-			&((struct __vxge_hw_blockpool_entry *) p)->acc_handle);
-
-		list_del(
-			&((struct __vxge_hw_blockpool_entry *)p)->item);
-		kfree(p);
-		blockpool->pool_size--;
-	}
-
-	list_for_each_safe(p, n, &blockpool->free_entry_list) {
-		list_del(
-			&((struct __vxge_hw_blockpool_entry *)p)->item);
-		kfree((void *)p);
-	}
-	ret = 0;
-exit:
-	return;
-}
-
-/*
- * __vxge_hw_blockpool_blocks_add - Request additional blocks
- */
-static
-void __vxge_hw_blockpool_blocks_add(struct __vxge_hw_blockpool *blockpool)
-{
-	u32 nreq = 0, i;
-
-	if ((blockpool->pool_size  +  blockpool->req_out) <
-		VXGE_HW_MIN_DMA_BLOCK_POOL_SIZE) {
-		nreq = VXGE_HW_INCR_DMA_BLOCK_POOL_SIZE;
-		blockpool->req_out += nreq;
-	}
-
-	for (i = 0; i < nreq; i++)
-		vxge_os_dma_malloc_async(
-			((struct __vxge_hw_device *)blockpool->hldev)->pdev,
-			blockpool->hldev, VXGE_HW_BLOCK_SIZE);
-}
-
-/*
- * __vxge_hw_blockpool_blocks_remove - Free additional blocks
- */
-static
-void __vxge_hw_blockpool_blocks_remove(struct __vxge_hw_blockpool *blockpool)
-{
-	struct list_head *p, *n;
-
-	list_for_each_safe(p, n, &blockpool->free_block_list) {
-
-		if (blockpool->pool_size < blockpool->pool_max)
-			break;
-
-		pci_unmap_single(
-			((struct __vxge_hw_device *)blockpool->hldev)->pdev,
-			((struct __vxge_hw_blockpool_entry *)p)->dma_addr,
-			((struct __vxge_hw_blockpool_entry *)p)->length,
-			PCI_DMA_BIDIRECTIONAL);
-
-		vxge_os_dma_free(
-			((struct __vxge_hw_device *)blockpool->hldev)->pdev,
-			((struct __vxge_hw_blockpool_entry *)p)->memblock,
-			&((struct __vxge_hw_blockpool_entry *)p)->acc_handle);
-
-		list_del(&((struct __vxge_hw_blockpool_entry *)p)->item);
-
-		list_add(p, &blockpool->free_entry_list);
-
-		blockpool->pool_size--;
-
-	}
-}
-
-/*
- * vxge_hw_blockpool_block_add - callback for vxge_os_dma_malloc_async
- * Adds a block to block pool
- */
-static void vxge_hw_blockpool_block_add(struct __vxge_hw_device *devh,
-					void *block_addr,
-					u32 length,
-					struct pci_dev *dma_h,
-					struct pci_dev *acc_handle)
-{
-	struct __vxge_hw_blockpool  *blockpool;
-	struct __vxge_hw_blockpool_entry  *entry = NULL;
-	dma_addr_t dma_addr;
-	enum vxge_hw_status status = VXGE_HW_OK;
-	u32 req_out;
-
-	blockpool = &devh->block_pool;
-
-	if (block_addr == NULL) {
-		blockpool->req_out--;
-		status = VXGE_HW_FAIL;
-		goto exit;
-	}
-
-	dma_addr = pci_map_single(devh->pdev, block_addr, length,
-				PCI_DMA_BIDIRECTIONAL);
-
-	if (unlikely(pci_dma_mapping_error(devh->pdev, dma_addr))) {
-
-		vxge_os_dma_free(devh->pdev, block_addr, &acc_handle);
-		blockpool->req_out--;
-		status = VXGE_HW_FAIL;
-		goto exit;
-	}
-
-
-	if (!list_empty(&blockpool->free_entry_list))
-		entry = (struct __vxge_hw_blockpool_entry *)
-			list_first_entry(&blockpool->free_entry_list,
-				struct __vxge_hw_blockpool_entry,
-				item);
-
-	if (entry == NULL)
-		entry = (struct __vxge_hw_blockpool_entry *)
-			vmalloc(sizeof(struct __vxge_hw_blockpool_entry));
-	else
-		list_del(&entry->item);
-
-	if (entry != NULL) {
-		entry->length = length;
-		entry->memblock = block_addr;
-		entry->dma_addr = dma_addr;
-		entry->acc_handle = acc_handle;
-		entry->dma_handle = dma_h;
-		list_add(&entry->item, &blockpool->free_block_list);
-		blockpool->pool_size++;
-		status = VXGE_HW_OK;
-	} else
-		status = VXGE_HW_ERR_OUT_OF_MEMORY;
-
-	blockpool->req_out--;
-
-	req_out = blockpool->req_out;
-exit:
-	return;
-}
-
-/*
- * __vxge_hw_blockpool_malloc - Allocate a memory block from pool
- * Allocates a block of memory of given size, either from block pool
- * or by calling vxge_os_dma_malloc()
- */
-static void *
-__vxge_hw_blockpool_malloc(struct __vxge_hw_device *devh, u32 size,
-				struct vxge_hw_mempool_dma *dma_object)
-{
-	struct __vxge_hw_blockpool_entry *entry = NULL;
-	struct __vxge_hw_blockpool  *blockpool;
-	void *memblock = NULL;
-	enum vxge_hw_status status = VXGE_HW_OK;
-
-	blockpool = &devh->block_pool;
-
-	if (size != blockpool->block_size) {
-
-		memblock = vxge_os_dma_malloc(devh->pdev, size,
-						&dma_object->handle,
-						&dma_object->acc_handle);
-
-		if (memblock == NULL) {
-			status = VXGE_HW_ERR_OUT_OF_MEMORY;
-			goto exit;
-		}
-
-		dma_object->addr = pci_map_single(devh->pdev, memblock, size,
-					PCI_DMA_BIDIRECTIONAL);
-
-		if (unlikely(pci_dma_mapping_error(devh->pdev,
-				dma_object->addr))) {
-			vxge_os_dma_free(devh->pdev, memblock,
-				&dma_object->acc_handle);
-			status = VXGE_HW_ERR_OUT_OF_MEMORY;
-			goto exit;
-		}
-
-	} else {
-
-		if (!list_empty(&blockpool->free_block_list))
-			entry = (struct __vxge_hw_blockpool_entry *)
-				list_first_entry(&blockpool->free_block_list,
-					struct __vxge_hw_blockpool_entry,
-					item);
-
-		if (entry != NULL) {
-			list_del(&entry->item);
-			dma_object->addr = entry->dma_addr;
-			dma_object->handle = entry->dma_handle;
-			dma_object->acc_handle = entry->acc_handle;
-			memblock = entry->memblock;
-
-			list_add(&entry->item,
-				&blockpool->free_entry_list);
-			blockpool->pool_size--;
-		}
-
-		if (memblock != NULL)
-			__vxge_hw_blockpool_blocks_add(blockpool);
-	}
-exit:
-	return memblock;
-}
-
-/*
- * __vxge_hw_blockpool_free - Frees the memory allcoated with
-				__vxge_hw_blockpool_malloc
- */
-static void
-__vxge_hw_blockpool_free(struct __vxge_hw_device *devh,
-			void *memblock, u32 size,
-			struct vxge_hw_mempool_dma *dma_object)
-{
-	struct __vxge_hw_blockpool_entry *entry = NULL;
-	struct __vxge_hw_blockpool  *blockpool;
-	enum vxge_hw_status status = VXGE_HW_OK;
-
-	blockpool = &devh->block_pool;
-
-	if (size != blockpool->block_size) {
-		pci_unmap_single(devh->pdev, dma_object->addr, size,
-			PCI_DMA_BIDIRECTIONAL);
-		vxge_os_dma_free(devh->pdev, memblock, &dma_object->acc_handle);
-	} else {
-
-		if (!list_empty(&blockpool->free_entry_list))
-			entry = (struct __vxge_hw_blockpool_entry *)
-				list_first_entry(&blockpool->free_entry_list,
-					struct __vxge_hw_blockpool_entry,
-					item);
-
-		if (entry == NULL)
-			entry = (struct __vxge_hw_blockpool_entry *)
-				vmalloc(sizeof(
-					struct __vxge_hw_blockpool_entry));
-		else
-			list_del(&entry->item);
-
-		if (entry != NULL) {
-			entry->length = size;
-			entry->memblock = memblock;
-			entry->dma_addr = dma_object->addr;
-			entry->acc_handle = dma_object->acc_handle;
-			entry->dma_handle = dma_object->handle;
-			list_add(&entry->item,
-					&blockpool->free_block_list);
-			blockpool->pool_size++;
-			status = VXGE_HW_OK;
-		} else
-			status = VXGE_HW_ERR_OUT_OF_MEMORY;
-
-		if (status == VXGE_HW_OK)
-			__vxge_hw_blockpool_blocks_remove(blockpool);
-	}
-}
-
-/*
- * __vxge_hw_blockpool_block_allocate - Allocates a block from block pool
- * This function allocates a block from block pool or from the system
- */
-static struct __vxge_hw_blockpool_entry *
-__vxge_hw_blockpool_block_allocate(struct __vxge_hw_device *devh, u32 size)
-{
-	struct __vxge_hw_blockpool_entry *entry = NULL;
-	struct __vxge_hw_blockpool  *blockpool;
-
-	blockpool = &devh->block_pool;
-
-	if (size == blockpool->block_size) {
-
-		if (!list_empty(&blockpool->free_block_list))
-			entry = (struct __vxge_hw_blockpool_entry *)
-				list_first_entry(&blockpool->free_block_list,
-					struct __vxge_hw_blockpool_entry,
-					item);
-
-		if (entry != NULL) {
-			list_del(&entry->item);
-			blockpool->pool_size--;
-		}
-	}
-
-	if (entry != NULL)
-		__vxge_hw_blockpool_blocks_add(blockpool);
-
-	return entry;
-}
-
-/*
- * __vxge_hw_blockpool_block_free - Frees a block from block pool
- * @devh: Hal device
- * @entry: Entry of block to be freed
- *
- * This function frees a block from block pool
- */
-static void
-__vxge_hw_blockpool_block_free(struct __vxge_hw_device *devh,
-			struct __vxge_hw_blockpool_entry *entry)
-{
-	struct __vxge_hw_blockpool  *blockpool;
-
-	blockpool = &devh->block_pool;
-
-	if (entry->length == blockpool->block_size) {
-		list_add(&entry->item, &blockpool->free_block_list);
-		blockpool->pool_size++;
-	}
-
-	__vxge_hw_blockpool_blocks_remove(blockpool);
-}
diff --git a/drivers/net/vxge/vxge-config.h b/drivers/net/vxge/vxge-config.h
index 5b2c8313426..e249e288d16 100644
--- a/drivers/net/vxge/vxge-config.h
+++ b/drivers/net/vxge/vxge-config.h
@@ -314,9 +314,9 @@ struct vxge_hw_ring_config {
 #define VXGE_HW_RING_DEFAULT					1
 
 	u32				ring_blocks;
-#define VXGE_HW_MIN_RING_BLOCKS				1
-#define VXGE_HW_MAX_RING_BLOCKS				128
-#define VXGE_HW_DEF_RING_BLOCKS				2
+#define VXGE_HW_MIN_RING_BLOCKS					1
+#define VXGE_HW_MAX_RING_BLOCKS					128
+#define VXGE_HW_DEF_RING_BLOCKS					2
 
 	u32				buffer_mode;
 #define VXGE_HW_RING_RXD_BUFFER_MODE_1				1
@@ -700,7 +700,7 @@ struct __vxge_hw_virtualpath {
  *
  * This structure is used to store the callback information.
  */
-struct __vxge_hw_vpath_handle{
+struct __vxge_hw_vpath_handle {
 	struct list_head	item;
 	struct __vxge_hw_virtualpath	*vpath;
 };
@@ -815,8 +815,8 @@ struct vxge_hw_device_hw_info {
 	u8		serial_number[VXGE_HW_INFO_LEN];
 	u8		part_number[VXGE_HW_INFO_LEN];
 	u8		product_desc[VXGE_HW_INFO_LEN];
-	u8 (mac_addrs)[VXGE_HW_MAX_VIRTUAL_PATHS][ETH_ALEN];
-	u8 (mac_addr_masks)[VXGE_HW_MAX_VIRTUAL_PATHS][ETH_ALEN];
+	u8 mac_addrs[VXGE_HW_MAX_VIRTUAL_PATHS][ETH_ALEN];
+	u8 mac_addr_masks[VXGE_HW_MAX_VIRTUAL_PATHS][ETH_ALEN];
 };
 
 /**
@@ -863,20 +863,10 @@ struct vxge_hw_device_attr {
 				loc, \
 				offset, \
 				&val64);			\
-								\
 	if (status != VXGE_HW_OK)				\
 		return status;						\
 }
 
-#define VXGE_HW_VPATH_STATS_PIO_READ(offset) {				\
-	status = __vxge_hw_vpath_stats_access(vpath, \
-			VXGE_HW_STATS_OP_READ, \
-			offset, \
-			&val64);					\
-	if (status != VXGE_HW_OK)					\
-		return status;						\
-}
-
 /*
  * struct __vxge_hw_ring - Ring channel.
  * @channel: Channel "base" of this ring, the common part of all HW
@@ -1148,7 +1138,7 @@ struct __vxge_hw_non_offload_db_wrapper {
  *             lookup to determine the transmit port.
  *             01: Send on physical Port1.
  *             10: Send on physical Port0.
-	*	       11: Send on both ports.
+ *	       11: Send on both ports.
  *             Bits 18 to 21 - Reserved
  *             Bits 22 to 23 - Gather_Code. This field is set by the host and
  *             is used to describe how individual buffers comprise a frame.
@@ -1927,6 +1917,15 @@ out:
 	return vaddr;
 }
 
+static inline void vxge_os_dma_free(struct pci_dev *pdev, const void *vaddr,
+			struct pci_dev **p_dma_acch)
+{
+	unsigned long misaligned = *(unsigned long *)p_dma_acch;
+	u8 *tmp = (u8 *)vaddr;
+	tmp -= misaligned;
+	kfree((void *)tmp);
+}
+
 /*
  * __vxge_hw_mempool_item_priv - will return pointer on per item private space
  */
@@ -1996,7 +1995,6 @@ enum vxge_hw_status vxge_hw_vpath_mtu_set(
 void
 vxge_hw_vpath_rx_doorbell_init(struct __vxge_hw_vpath_handle *vp);
 
-
 #ifndef readq
 static inline u64 readq(void __iomem *addr)
 {
diff --git a/drivers/net/vxge/vxge-ethtool.c b/drivers/net/vxge/vxge-ethtool.c
index 09f721e1051..1dd3a21b3a4 100644
--- a/drivers/net/vxge/vxge-ethtool.c
+++ b/drivers/net/vxge/vxge-ethtool.c
@@ -80,7 +80,7 @@ static int vxge_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
 static void vxge_ethtool_gdrvinfo(struct net_device *dev,
 				  struct ethtool_drvinfo *info)
 {
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 	strlcpy(info->driver, VXGE_DRIVER_NAME, sizeof(VXGE_DRIVER_NAME));
 	strlcpy(info->version, DRV_VERSION, sizeof(DRV_VERSION));
 	strlcpy(info->fw_version, vdev->fw_version, VXGE_HW_FW_STRLEN);
@@ -108,7 +108,7 @@ static void vxge_ethtool_gregs(struct net_device *dev,
 	enum vxge_hw_status status;
 	u64 reg;
 	u64 *reg_space = (u64 *)space;
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 	struct __vxge_hw_device *hldev = vdev->devh;
 
 	regs->len = sizeof(struct vxge_hw_vpath_reg) * vdev->no_of_vpath;
@@ -144,7 +144,7 @@ static void vxge_ethtool_gregs(struct net_device *dev,
  */
 static int vxge_ethtool_idnic(struct net_device *dev, u32 data)
 {
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 	struct __vxge_hw_device *hldev = vdev->devh;
 
 	vxge_hw_device_flick_link_led(hldev, VXGE_FLICKER_ON);
@@ -166,7 +166,7 @@ static int vxge_ethtool_idnic(struct net_device *dev, u32 data)
 static void vxge_ethtool_getpause_data(struct net_device *dev,
 				       struct ethtool_pauseparam *ep)
 {
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 	struct __vxge_hw_device *hldev = vdev->devh;
 
 	vxge_hw_device_getpause_data(hldev, 0, &ep->tx_pause, &ep->rx_pause);
@@ -185,7 +185,7 @@ static void vxge_ethtool_getpause_data(struct net_device *dev,
 static int vxge_ethtool_setpause_data(struct net_device *dev,
 				      struct ethtool_pauseparam *ep)
 {
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 	struct __vxge_hw_device *hldev = vdev->devh;
 
 	vxge_hw_device_setpause_data(hldev, 0, ep->tx_pause, ep->rx_pause);
@@ -203,7 +203,7 @@ static void vxge_get_ethtool_stats(struct net_device *dev,
 	enum vxge_hw_status status;
 	enum vxge_hw_status swstatus;
 	struct vxge_vpath *vpath = NULL;
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 	struct __vxge_hw_device *hldev = vdev->devh;
 	struct vxge_hw_xmac_stats *xmac_stats;
 	struct vxge_hw_device_stats_sw_info *sw_stats;
@@ -572,7 +572,7 @@ static void vxge_ethtool_get_strings(struct net_device *dev, u32 stringset,
 {
 	int stat_size = 0;
 	int i, j;
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 	switch (stringset) {
 	case ETH_SS_STATS:
 		vxge_add_string("VPATH STATISTICS%s\t\t\t",
@@ -1059,21 +1059,21 @@ static void vxge_ethtool_get_strings(struct net_device *dev, u32 stringset,
 
 static int vxge_ethtool_get_regs_len(struct net_device *dev)
 {
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 
 	return sizeof(struct vxge_hw_vpath_reg) * vdev->no_of_vpath;
 }
 
 static u32 vxge_get_rx_csum(struct net_device *dev)
 {
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 
 	return vdev->rx_csum;
 }
 
 static int vxge_set_rx_csum(struct net_device *dev, u32 data)
 {
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 
 	if (data)
 		vdev->rx_csum = 1;
@@ -1095,7 +1095,7 @@ static int vxge_ethtool_op_set_tso(struct net_device *dev, u32 data)
 
 static int vxge_ethtool_get_sset_count(struct net_device *dev, int sset)
 {
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 
 	switch (sset) {
 	case ETH_SS_STATS:
@@ -1114,7 +1114,7 @@ static int vxge_ethtool_get_sset_count(struct net_device *dev, int sset)
 
 static int vxge_set_flags(struct net_device *dev, u32 data)
 {
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 	enum vxge_hw_status status;
 
 	if (data & ~ETH_FLAG_RXHASH)
@@ -1148,7 +1148,7 @@ static int vxge_set_flags(struct net_device *dev, u32 data)
 
 static int vxge_fw_flash(struct net_device *dev, struct ethtool_flash *parms)
 {
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 
 	if (vdev->max_vpath_supported != VXGE_HW_MAX_VIRTUAL_PATHS) {
 		printk(KERN_INFO "Single Function Mode is required to flash the"
@@ -1177,7 +1177,7 @@ static const struct ethtool_ops vxge_ethtool_ops = {
 	.get_rx_csum		= vxge_get_rx_csum,
 	.set_rx_csum		= vxge_set_rx_csum,
 	.get_tx_csum		= ethtool_op_get_tx_csum,
-	.set_tx_csum		= ethtool_op_set_tx_hw_csum,
+	.set_tx_csum		= ethtool_op_set_tx_ipv6_csum,
 	.get_sg			= ethtool_op_get_sg,
 	.set_sg			= ethtool_op_set_sg,
 	.get_tso		= ethtool_op_get_tso,
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index 3f2d6ed13d3..1ac9b568f1b 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -84,15 +84,6 @@ module_param_array(bw_percentage, uint, NULL, 0);
 
 static struct vxge_drv_config *driver_config;
 
-static enum vxge_hw_status vxge_add_mac_addr(struct vxgedev *vdev,
-					     struct macInfo *mac);
-static enum vxge_hw_status vxge_del_mac_addr(struct vxgedev *vdev,
-					     struct macInfo *mac);
-static int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac);
-static int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac);
-static enum vxge_hw_status vxge_restore_vpath_vid_table(struct vxge_vpath *vpath);
-static enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath);
-
 static inline int is_vxge_card_up(struct vxgedev *vdev)
 {
 	return test_bit(__VXGE_STATE_CARD_UP, &vdev->state);
@@ -149,11 +140,10 @@ static inline void VXGE_COMPLETE_ALL_RX(struct vxgedev *vdev)
  * This function is called during interrupt context to notify link up state
  * change.
  */
-static void
-vxge_callback_link_up(struct __vxge_hw_device *hldev)
+static void vxge_callback_link_up(struct __vxge_hw_device *hldev)
 {
 	struct net_device *dev = hldev->ndev;
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 
 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 		vdev->ndev->name, __func__, __LINE__);
@@ -173,11 +163,10 @@ vxge_callback_link_up(struct __vxge_hw_device *hldev)
  * This function is called during interrupt context to notify link down state
  * change.
  */
-static void
-vxge_callback_link_down(struct __vxge_hw_device *hldev)
+static void vxge_callback_link_down(struct __vxge_hw_device *hldev)
 {
 	struct net_device *dev = hldev->ndev;
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 
 	vxge_debug_entryexit(VXGE_TRACE,
 		"%s: %s:%d", vdev->ndev->name, __func__, __LINE__);
@@ -196,7 +185,7 @@ vxge_callback_link_down(struct __vxge_hw_device *hldev)
  *
  * Allocate SKB.
  */
-static struct sk_buff*
+static struct sk_buff *
 vxge_rx_alloc(void *dtrh, struct vxge_ring *ring, const int skb_size)
 {
 	struct net_device    *dev;
@@ -414,7 +403,6 @@ vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr,
 
 		prefetch((char *)skb + L1_CACHE_BYTES);
 		if (unlikely(t_code)) {
-
 			if (vxge_hw_ring_handle_tcode(ringh, dtr, t_code) !=
 				VXGE_HW_OK) {
 
@@ -437,9 +425,7 @@ vxge_rx_1b_compl(struct __vxge_hw_ring *ringh, void *dtr,
 		}
 
 		if (pkt_length > VXGE_LL_RX_COPY_THRESHOLD) {
-
 			if (vxge_rx_alloc(dtr, ring, data_size) != NULL) {
-
 				if (!vxge_rx_map(dtr, ring)) {
 					skb_put(skb, pkt_length);
 
@@ -678,6 +664,65 @@ static enum vxge_hw_status vxge_search_mac_addr_in_list(
 	return FALSE;
 }
 
+static int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac)
+{
+	struct vxge_mac_addrs *new_mac_entry;
+	u8 *mac_address = NULL;
+
+	if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT)
+		return TRUE;
+
+	new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC);
+	if (!new_mac_entry) {
+		vxge_debug_mem(VXGE_ERR,
+			"%s: memory allocation failed",
+			VXGE_DRIVER_NAME);
+		return FALSE;
+	}
+
+	list_add(&new_mac_entry->item, &vpath->mac_addr_list);
+
+	/* Copy the new mac address to the list */
+	mac_address = (u8 *)&new_mac_entry->macaddr;
+	memcpy(mac_address, mac->macaddr, ETH_ALEN);
+
+	new_mac_entry->state = mac->state;
+	vpath->mac_addr_cnt++;
+
+	/* Is this a multicast address */
+	if (0x01 & mac->macaddr[0])
+		vpath->mcast_addr_cnt++;
+
+	return TRUE;
+}
+
+/* Add a mac address to DA table */
+static enum vxge_hw_status
+vxge_add_mac_addr(struct vxgedev *vdev, struct macInfo *mac)
+{
+	enum vxge_hw_status status = VXGE_HW_OK;
+	struct vxge_vpath *vpath;
+	enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode;
+
+	if (0x01 & mac->macaddr[0]) /* multicast address */
+		duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE;
+	else
+		duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE;
+
+	vpath = &vdev->vpaths[mac->vpath_no];
+	status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr,
+						mac->macmask, duplicate_mode);
+	if (status != VXGE_HW_OK) {
+		vxge_debug_init(VXGE_ERR,
+			"DA config add entry failed for vpath:%d",
+			vpath->device_id);
+	} else
+		if (FALSE == vxge_mac_list_add(vpath, mac))
+			status = -EPERM;
+
+	return status;
+}
+
 static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header)
 {
 	struct macInfo mac_info;
@@ -688,7 +733,7 @@ static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header)
 	struct vxge_vpath *vpath = NULL;
 	struct __vxge_hw_device *hldev;
 
-	hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev);
+	hldev = pci_get_drvdata(vdev->pdev);
 
 	mac_address = (u8 *)&mac_addr;
 	memcpy(mac_address, mac_header, ETH_ALEN);
@@ -787,7 +832,7 @@ vxge_xmit(struct sk_buff *skb, struct net_device *dev)
 		return NETDEV_TX_OK;
 	}
 
-	vdev = (struct vxgedev *)netdev_priv(dev);
+	vdev = netdev_priv(dev);
 
 	if (unlikely(!is_vxge_card_up(vdev))) {
 		vxge_debug_tx(VXGE_ERR,
@@ -1023,6 +1068,50 @@ vxge_tx_term(void *dtrh, enum vxge_hw_txdl_state state, void *userdata)
 		"%s:%d  Exiting...", __func__, __LINE__);
 }
 
+static int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac)
+{
+	struct list_head *entry, *next;
+	u64 del_mac = 0;
+	u8 *mac_address = (u8 *) (&del_mac);
+
+	/* Copy the mac address to delete from the list */
+	memcpy(mac_address, mac->macaddr, ETH_ALEN);
+
+	list_for_each_safe(entry, next, &vpath->mac_addr_list) {
+		if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) {
+			list_del(entry);
+			kfree((struct vxge_mac_addrs *)entry);
+			vpath->mac_addr_cnt--;
+
+			/* Is this a multicast address */
+			if (0x01 & mac->macaddr[0])
+				vpath->mcast_addr_cnt--;
+			return TRUE;
+		}
+	}
+
+	return FALSE;
+}
+
+/* delete a mac address from DA table */
+static enum vxge_hw_status
+vxge_del_mac_addr(struct vxgedev *vdev, struct macInfo *mac)
+{
+	enum vxge_hw_status status = VXGE_HW_OK;
+	struct vxge_vpath *vpath;
+
+	vpath = &vdev->vpaths[mac->vpath_no];
+	status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr,
+						mac->macmask);
+	if (status != VXGE_HW_OK) {
+		vxge_debug_init(VXGE_ERR,
+			"DA config delete entry failed for vpath:%d",
+			vpath->device_id);
+	} else
+		vxge_mac_list_del(vpath, mac);
+	return status;
+}
+
 /**
  * vxge_set_multicast
  * @dev: pointer to the device structure
@@ -1052,7 +1141,7 @@ static void vxge_set_multicast(struct net_device *dev)
 	vxge_debug_entryexit(VXGE_TRACE,
 		"%s:%d", __func__, __LINE__);
 
-	vdev = (struct vxgedev *)netdev_priv(dev);
+	vdev = netdev_priv(dev);
 	hldev = (struct __vxge_hw_device  *)vdev->devh;
 
 	if (unlikely(!is_vxge_card_up(vdev)))
@@ -1209,7 +1298,7 @@ static int vxge_set_mac_addr(struct net_device *dev, void *p)
 
 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 
-	vdev = (struct vxgedev *)netdev_priv(dev);
+	vdev = netdev_priv(dev);
 	hldev = vdev->devh;
 
 	if (!is_valid_ether_addr(addr->sa_data))
@@ -1313,7 +1402,7 @@ static void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id)
 	struct __vxge_hw_device *hldev;
 	int msix_id;
 
-	hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev);
+	hldev = pci_get_drvdata(vdev->pdev);
 
 	vxge_hw_vpath_wait_receive_idle(hldev, vpath->device_id);
 
@@ -1333,6 +1422,95 @@ static void vxge_vpath_intr_disable(struct vxgedev *vdev, int vp_id)
 	}
 }
 
+/* list all mac addresses from DA table */
+static enum vxge_hw_status
+vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath, struct macInfo *mac)
+{
+	enum vxge_hw_status status = VXGE_HW_OK;
+	unsigned char macmask[ETH_ALEN];
+	unsigned char macaddr[ETH_ALEN];
+
+	status = vxge_hw_vpath_mac_addr_get(vpath->handle,
+				macaddr, macmask);
+	if (status != VXGE_HW_OK) {
+		vxge_debug_init(VXGE_ERR,
+			"DA config list entry failed for vpath:%d",
+			vpath->device_id);
+		return status;
+	}
+
+	while (memcmp(mac->macaddr, macaddr, ETH_ALEN)) {
+		status = vxge_hw_vpath_mac_addr_get_next(vpath->handle,
+				macaddr, macmask);
+		if (status != VXGE_HW_OK)
+			break;
+	}
+
+	return status;
+}
+
+/* Store all mac addresses from the list to the DA table */
+static enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath)
+{
+	enum vxge_hw_status status = VXGE_HW_OK;
+	struct macInfo mac_info;
+	u8 *mac_address = NULL;
+	struct list_head *entry, *next;
+
+	memset(&mac_info, 0, sizeof(struct macInfo));
+
+	if (vpath->is_open) {
+		list_for_each_safe(entry, next, &vpath->mac_addr_list) {
+			mac_address =
+				(u8 *)&
+				((struct vxge_mac_addrs *)entry)->macaddr;
+			memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
+			((struct vxge_mac_addrs *)entry)->state =
+				VXGE_LL_MAC_ADDR_IN_DA_TABLE;
+			/* does this mac address already exist in da table? */
+			status = vxge_search_mac_addr_in_da_table(vpath,
+				&mac_info);
+			if (status != VXGE_HW_OK) {
+				/* Add this mac address to the DA table */
+				status = vxge_hw_vpath_mac_addr_add(
+					vpath->handle, mac_info.macaddr,
+					mac_info.macmask,
+				    VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE);
+				if (status != VXGE_HW_OK) {
+					vxge_debug_init(VXGE_ERR,
+					    "DA add entry failed for vpath:%d",
+					    vpath->device_id);
+					((struct vxge_mac_addrs *)entry)->state
+						= VXGE_LL_MAC_ADDR_IN_LIST;
+				}
+			}
+		}
+	}
+
+	return status;
+}
+
+/* Store all vlan ids from the list to the vid table */
+static enum vxge_hw_status
+vxge_restore_vpath_vid_table(struct vxge_vpath *vpath)
+{
+	enum vxge_hw_status status = VXGE_HW_OK;
+	struct vxgedev *vdev = vpath->vdev;
+	u16 vid;
+
+	if (vdev->vlgrp && vpath->is_open) {
+
+		for (vid = 0; vid < VLAN_N_VID; vid++) {
+			if (!vlan_group_get_device(vdev->vlgrp, vid))
+				continue;
+			/* Add these vlan to the vid table */
+			status = vxge_hw_vpath_vid_add(vpath->handle, vid);
+		}
+	}
+
+	return status;
+}
+
 /*
  * vxge_reset_vpath
  * @vdev: pointer to vdev
@@ -1428,12 +1606,16 @@ static int do_vxge_reset(struct vxgedev *vdev, int event)
 	}
 
 	if (event == VXGE_LL_FULL_RESET) {
+		netif_carrier_off(vdev->ndev);
+
 		/* wait for all the vpath reset to complete */
 		for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
 			while (test_bit(vp_id, &vdev->vp_reset))
 				msleep(50);
 		}
 
+		netif_carrier_on(vdev->ndev);
+
 		/* if execution mode is set to debug, don't reset the adapter */
 		if (unlikely(vdev->exec_mode)) {
 			vxge_debug_init(VXGE_ERR,
@@ -1587,9 +1769,14 @@ out:
  *
  * driver may reset the chip on events of serr, eccerr, etc
  */
-static int vxge_reset(struct vxgedev *vdev)
+static void vxge_reset(struct work_struct *work)
 {
-	return do_vxge_reset(vdev, VXGE_LL_FULL_RESET);
+	struct vxgedev *vdev = container_of(work, struct vxgedev, reset_task);
+
+	if (!netif_running(vdev->ndev))
+		return;
+
+	do_vxge_reset(vdev, VXGE_LL_FULL_RESET);
 }
 
 /**
@@ -1632,8 +1819,7 @@ static int vxge_poll_inta(struct napi_struct *napi, int budget)
 	int budget_org = budget;
 	struct vxge_ring *ring;
 
-	struct __vxge_hw_device *hldev = (struct __vxge_hw_device *)
-		pci_get_drvdata(vdev->pdev);
+	struct __vxge_hw_device *hldev = pci_get_drvdata(vdev->pdev);
 
 	for (i = 0; i < vdev->no_of_vpath; i++) {
 		ring = &vdev->vpaths[i].ring;
@@ -1672,8 +1858,8 @@ static void vxge_netpoll(struct net_device *dev)
 	struct __vxge_hw_device *hldev;
 	struct vxgedev *vdev;
 
-	vdev = (struct vxgedev *)netdev_priv(dev);
-	hldev = (struct __vxge_hw_device  *)pci_get_drvdata(vdev->pdev);
+	vdev = netdev_priv(dev);
+	hldev = pci_get_drvdata(vdev->pdev);
 
 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 
@@ -1746,7 +1932,6 @@ static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev)
 				vdev->config.rth_algorithm,
 				&hash_types,
 				vdev->config.rth_bkt_sz);
-
 		 if (status != VXGE_HW_OK) {
 			vxge_debug_init(VXGE_ERR,
 				"RTH configuration failed for vpath:%d",
@@ -1758,199 +1943,6 @@ static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev)
 	return status;
 }
 
-static int vxge_mac_list_add(struct vxge_vpath *vpath, struct macInfo *mac)
-{
-	struct vxge_mac_addrs *new_mac_entry;
-	u8 *mac_address = NULL;
-
-	if (vpath->mac_addr_cnt >= VXGE_MAX_LEARN_MAC_ADDR_CNT)
-		return TRUE;
-
-	new_mac_entry = kzalloc(sizeof(struct vxge_mac_addrs), GFP_ATOMIC);
-	if (!new_mac_entry) {
-		vxge_debug_mem(VXGE_ERR,
-			"%s: memory allocation failed",
-			VXGE_DRIVER_NAME);
-		return FALSE;
-	}
-
-	list_add(&new_mac_entry->item, &vpath->mac_addr_list);
-
-	/* Copy the new mac address to the list */
-	mac_address = (u8 *)&new_mac_entry->macaddr;
-	memcpy(mac_address, mac->macaddr, ETH_ALEN);
-
-	new_mac_entry->state = mac->state;
-	vpath->mac_addr_cnt++;
-
-	/* Is this a multicast address */
-	if (0x01 & mac->macaddr[0])
-		vpath->mcast_addr_cnt++;
-
-	return TRUE;
-}
-
-/* Add a mac address to DA table */
-static enum vxge_hw_status vxge_add_mac_addr(struct vxgedev *vdev,
-					     struct macInfo *mac)
-{
-	enum vxge_hw_status status = VXGE_HW_OK;
-	struct vxge_vpath *vpath;
-	enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode;
-
-	if (0x01 & mac->macaddr[0]) /* multicast address */
-		duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE;
-	else
-		duplicate_mode = VXGE_HW_VPATH_MAC_ADDR_REPLACE_DUPLICATE;
-
-	vpath = &vdev->vpaths[mac->vpath_no];
-	status = vxge_hw_vpath_mac_addr_add(vpath->handle, mac->macaddr,
-						mac->macmask, duplicate_mode);
-	if (status != VXGE_HW_OK) {
-		vxge_debug_init(VXGE_ERR,
-			"DA config add entry failed for vpath:%d",
-			vpath->device_id);
-	} else
-		if (FALSE == vxge_mac_list_add(vpath, mac))
-			status = -EPERM;
-
-	return status;
-}
-
-static int vxge_mac_list_del(struct vxge_vpath *vpath, struct macInfo *mac)
-{
-	struct list_head *entry, *next;
-	u64 del_mac = 0;
-	u8 *mac_address = (u8 *)(&del_mac);
-
-	/* Copy the mac address to delete from the list */
-	memcpy(mac_address, mac->macaddr, ETH_ALEN);
-
-	list_for_each_safe(entry, next, &vpath->mac_addr_list) {
-		if (((struct vxge_mac_addrs *)entry)->macaddr == del_mac) {
-			list_del(entry);
-			kfree((struct vxge_mac_addrs *)entry);
-			vpath->mac_addr_cnt--;
-
-			/* Is this a multicast address */
-			if (0x01 & mac->macaddr[0])
-				vpath->mcast_addr_cnt--;
-			return TRUE;
-		}
-	}
-
-	return FALSE;
-}
-/* delete a mac address from DA table */
-static enum vxge_hw_status vxge_del_mac_addr(struct vxgedev *vdev,
-					     struct macInfo *mac)
-{
-	enum vxge_hw_status status = VXGE_HW_OK;
-	struct vxge_vpath *vpath;
-
-	vpath = &vdev->vpaths[mac->vpath_no];
-	status = vxge_hw_vpath_mac_addr_delete(vpath->handle, mac->macaddr,
-						mac->macmask);
-	if (status != VXGE_HW_OK) {
-		vxge_debug_init(VXGE_ERR,
-			"DA config delete entry failed for vpath:%d",
-			vpath->device_id);
-	} else
-		vxge_mac_list_del(vpath, mac);
-	return status;
-}
-
-/* list all mac addresses from DA table */
-enum vxge_hw_status
-static vxge_search_mac_addr_in_da_table(struct vxge_vpath *vpath,
-					struct macInfo *mac)
-{
-	enum vxge_hw_status status = VXGE_HW_OK;
-	unsigned char macmask[ETH_ALEN];
-	unsigned char macaddr[ETH_ALEN];
-
-	status = vxge_hw_vpath_mac_addr_get(vpath->handle,
-				macaddr, macmask);
-	if (status != VXGE_HW_OK) {
-		vxge_debug_init(VXGE_ERR,
-			"DA config list entry failed for vpath:%d",
-			vpath->device_id);
-		return status;
-	}
-
-	while (memcmp(mac->macaddr, macaddr, ETH_ALEN)) {
-
-		status = vxge_hw_vpath_mac_addr_get_next(vpath->handle,
-				macaddr, macmask);
-		if (status != VXGE_HW_OK)
-			break;
-	}
-
-	return status;
-}
-
-/* Store all vlan ids from the list to the vid table */
-static enum vxge_hw_status vxge_restore_vpath_vid_table(struct vxge_vpath *vpath)
-{
-	enum vxge_hw_status status = VXGE_HW_OK;
-	struct vxgedev *vdev = vpath->vdev;
-	u16 vid;
-
-	if (vdev->vlgrp && vpath->is_open) {
-
-		for (vid = 0; vid < VLAN_N_VID; vid++) {
-			if (!vlan_group_get_device(vdev->vlgrp, vid))
-				continue;
-			/* Add these vlan to the vid table */
-			status = vxge_hw_vpath_vid_add(vpath->handle, vid);
-		}
-	}
-
-	return status;
-}
-
-/* Store all mac addresses from the list to the DA table */
-static enum vxge_hw_status vxge_restore_vpath_mac_addr(struct vxge_vpath *vpath)
-{
-	enum vxge_hw_status status = VXGE_HW_OK;
-	struct macInfo mac_info;
-	u8 *mac_address = NULL;
-	struct list_head *entry, *next;
-
-	memset(&mac_info, 0, sizeof(struct macInfo));
-
-	if (vpath->is_open) {
-
-		list_for_each_safe(entry, next, &vpath->mac_addr_list) {
-			mac_address =
-				(u8 *)&
-				((struct vxge_mac_addrs *)entry)->macaddr;
-			memcpy(mac_info.macaddr, mac_address, ETH_ALEN);
-			((struct vxge_mac_addrs *)entry)->state =
-				VXGE_LL_MAC_ADDR_IN_DA_TABLE;
-			/* does this mac address already exist in da table? */
-			status = vxge_search_mac_addr_in_da_table(vpath,
-				&mac_info);
-			if (status != VXGE_HW_OK) {
-				/* Add this mac address to the DA table */
-				status = vxge_hw_vpath_mac_addr_add(
-					vpath->handle, mac_info.macaddr,
-					mac_info.macmask,
-				    VXGE_HW_VPATH_MAC_ADDR_ADD_DUPLICATE);
-				if (status != VXGE_HW_OK) {
-					vxge_debug_init(VXGE_ERR,
-					    "DA add entry failed for vpath:%d",
-					    vpath->device_id);
-					((struct vxge_mac_addrs *)entry)->state
-						= VXGE_LL_MAC_ADDR_IN_LIST;
-				}
-			}
-		}
-	}
-
-	return status;
-}
-
 /* reset vpaths */
 enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev)
 {
@@ -2043,6 +2035,7 @@ static int vxge_open_vpaths(struct vxgedev *vdev)
 
 		vpath->ring.ndev = vdev->ndev;
 		vpath->ring.pdev = vdev->pdev;
+
 		status = vxge_hw_vpath_open(vdev->devh, &attr, &vpath->handle);
 		if (status == VXGE_HW_OK) {
 			vpath->fifo.handle =
@@ -2071,11 +2064,10 @@ static int vxge_open_vpaths(struct vxgedev *vdev)
 			vdev->stats.vpaths_open++;
 		} else {
 			vdev->stats.vpath_open_fail++;
-			vxge_debug_init(VXGE_ERR,
-				"%s: vpath: %d failed to open "
-				"with status: %d",
-			    vdev->ndev->name, vpath->device_id,
-				status);
+			vxge_debug_init(VXGE_ERR, "%s: vpath: %d failed to "
+					"open with status: %d",
+					vdev->ndev->name, vpath->device_id,
+					status);
 			vxge_close_vpaths(vdev, 0);
 			return -EPERM;
 		}
@@ -2083,6 +2075,7 @@ static int vxge_open_vpaths(struct vxgedev *vdev)
 		vp_id = vpath->handle->vpath->vp_id;
 		vdev->vpaths_deployed |= vxge_mBIT(vp_id);
 	}
+
 	return VXGE_HW_OK;
 }
 
@@ -2107,7 +2100,7 @@ static irqreturn_t vxge_isr_napi(int irq, void *dev_id)
 	vxge_debug_intr(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 
 	dev = vdev->ndev;
-	hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev);
+	hldev = pci_get_drvdata(vdev->pdev);
 
 	if (pci_channel_offline(vdev->pdev))
 		return IRQ_NONE;
@@ -2115,8 +2108,7 @@ static irqreturn_t vxge_isr_napi(int irq, void *dev_id)
 	if (unlikely(!is_vxge_card_up(vdev)))
 		return IRQ_HANDLED;
 
-	status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode,
-			&reason);
+	status = vxge_hw_device_begin_irq(hldev, vdev->exec_mode, &reason);
 	if (status == VXGE_HW_OK) {
 		vxge_hw_device_mask_all(hldev);
 
@@ -2342,7 +2334,7 @@ static void vxge_rem_msix_isr(struct vxgedev *vdev)
 static void vxge_rem_isr(struct vxgedev *vdev)
 {
 	struct __vxge_hw_device *hldev;
-	hldev = (struct __vxge_hw_device  *)pci_get_drvdata(vdev->pdev);
+	hldev = pci_get_drvdata(vdev->pdev);
 
 #ifdef CONFIG_PCI_MSI
 	if (vdev->config.intr_type == MSI_X) {
@@ -2569,8 +2561,7 @@ static void vxge_poll_vp_lockup(unsigned long data)
  * Return value: '0' on success and an appropriate (-)ve integer as
  * defined in errno.h file on failure.
  */
-static int
-vxge_open(struct net_device *dev)
+static int vxge_open(struct net_device *dev)
 {
 	enum vxge_hw_status status;
 	struct vxgedev *vdev;
@@ -2579,11 +2570,12 @@ vxge_open(struct net_device *dev)
 	int ret = 0;
 	int i;
 	u64 val64, function_mode;
+
 	vxge_debug_entryexit(VXGE_TRACE,
 		"%s: %s:%d", dev->name, __func__, __LINE__);
 
-	vdev = (struct vxgedev *)netdev_priv(dev);
-	hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev);
+	vdev = netdev_priv(dev);
+	hldev = pci_get_drvdata(vdev->pdev);
 	function_mode = vdev->config.device_hw_info.function_mode;
 
 	/* make sure you have link off by default every time Nic is
@@ -2810,8 +2802,8 @@ static int do_vxge_close(struct net_device *dev, int do_io)
 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d",
 		dev->name, __func__, __LINE__);
 
-	vdev = (struct vxgedev *)netdev_priv(dev);
-	hldev = (struct __vxge_hw_device *)pci_get_drvdata(vdev->pdev);
+	vdev = netdev_priv(dev);
+	hldev = pci_get_drvdata(vdev->pdev);
 
 	if (unlikely(!is_vxge_card_up(vdev)))
 		return 0;
@@ -2831,7 +2823,6 @@ static int do_vxge_close(struct net_device *dev, int do_io)
 					struct vxge_hw_mrpcim_reg,
 					rts_mgr_cbasin_cfg),
 				&val64);
-
 		if (status == VXGE_HW_OK) {
 			val64 &= ~vpath_vector;
 			status = vxge_hw_mgmt_reg_write(vdev->devh,
@@ -2915,8 +2906,7 @@ static int do_vxge_close(struct net_device *dev, int do_io)
  * Return value: '0' on success and an appropriate (-)ve integer as
  * defined in errno.h file on failure.
  */
-static int
-vxge_close(struct net_device *dev)
+static int vxge_close(struct net_device *dev)
 {
 	do_vxge_close(dev, 1);
 	return 0;
@@ -2990,9 +2980,7 @@ vxge_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *net_stats)
 		net_stats->rx_bytes += vdev->vpaths[k].ring.stats.rx_bytes;
 		net_stats->rx_errors += vdev->vpaths[k].ring.stats.rx_errors;
 		net_stats->multicast += vdev->vpaths[k].ring.stats.rx_mcast;
-		net_stats->rx_dropped +=
-			vdev->vpaths[k].ring.stats.rx_dropped;
-
+		net_stats->rx_dropped += vdev->vpaths[k].ring.stats.rx_dropped;
 		net_stats->tx_packets += vdev->vpaths[k].fifo.stats.tx_frms;
 		net_stats->tx_bytes += vdev->vpaths[k].fifo.stats.tx_bytes;
 		net_stats->tx_errors += vdev->vpaths[k].fifo.stats.tx_errors;
@@ -3132,18 +3120,17 @@ static int vxge_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
  * This function is triggered if the Tx Queue is stopped
  * for a pre-defined amount of time when the Interface is still up.
  */
-static void
-vxge_tx_watchdog(struct net_device *dev)
+static void vxge_tx_watchdog(struct net_device *dev)
 {
 	struct vxgedev *vdev;
 
 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 
-	vdev = (struct vxgedev *)netdev_priv(dev);
+	vdev = netdev_priv(dev);
 
 	vdev->cric_err_event = VXGE_HW_EVENT_RESET_START;
 
-	vxge_reset(vdev);
+	schedule_work(&vdev->reset_task);
 	vxge_debug_entryexit(VXGE_TRACE,
 		"%s:%d  Exiting...", __func__, __LINE__);
 }
@@ -3167,7 +3154,7 @@ vxge_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
 
 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 
-	vdev = (struct vxgedev *)netdev_priv(dev);
+	vdev = netdev_priv(dev);
 
 	vpath = &vdev->vpaths[0];
 	if ((NULL == grp) && (vpath->is_open)) {
@@ -3216,7 +3203,7 @@ vxge_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
 	struct vxge_vpath *vpath;
 	int vp_id;
 
-	vdev = (struct vxgedev *)netdev_priv(dev);
+	vdev = netdev_priv(dev);
 
 	/* Add these vlan to the vid table */
 	for (vp_id = 0; vp_id < vdev->no_of_vpath; vp_id++) {
@@ -3243,7 +3230,7 @@ vxge_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
 
 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
 
-	vdev = (struct vxgedev *)netdev_priv(dev);
+	vdev = netdev_priv(dev);
 
 	vlan_group_set_device(vdev->vlgrp, vid, NULL);
 
@@ -3265,15 +3252,12 @@ static const struct net_device_ops vxge_netdev_ops = {
 	.ndo_start_xmit         = vxge_xmit,
 	.ndo_validate_addr      = eth_validate_addr,
 	.ndo_set_multicast_list = vxge_set_multicast,
-
 	.ndo_do_ioctl           = vxge_ioctl,
-
 	.ndo_set_mac_address    = vxge_set_mac_addr,
 	.ndo_change_mtu         = vxge_change_mtu,
 	.ndo_vlan_rx_register   = vxge_vlan_rx_register,
 	.ndo_vlan_rx_kill_vid   = vxge_vlan_rx_kill_vid,
 	.ndo_vlan_rx_add_vid	= vxge_vlan_rx_add_vid,
-
 	.ndo_tx_timeout         = vxge_tx_watchdog,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller    = vxge_netpoll,
@@ -3348,6 +3332,7 @@ static int __devinit vxge_device_register(struct __vxge_hw_device *hldev,
 	ndev->netdev_ops = &vxge_netdev_ops;
 
 	ndev->watchdog_timeo = VXGE_LL_WATCH_DOG_TIMEOUT;
+	INIT_WORK(&vdev->reset_task, vxge_reset);
 
 	vxge_initialize_ethtool_ops(ndev);
 
@@ -3369,7 +3354,7 @@ static int __devinit vxge_device_register(struct __vxge_hw_device *hldev,
 
 	ndev->features |= NETIF_F_SG;
 
-	ndev->features |= NETIF_F_HW_CSUM;
+	ndev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	vxge_debug_init(vxge_hw_device_trace_level_get(hldev),
 		"%s : checksuming enabled", __func__);
 
@@ -3452,13 +3437,13 @@ static void vxge_device_unregister(struct __vxge_hw_device *hldev)
 	vxge_debug_entryexit(vdev->level_trace,	"%s: %s:%d", vdev->ndev->name,
 			     __func__, __LINE__);
 
-	memcpy(buf, dev->name, IFNAMSIZ);
+	strncpy(buf, dev->name, IFNAMSIZ);
+
+	flush_work_sync(&vdev->reset_task);
 
 	/* in 2.6 will call stop() if device is up */
 	unregister_netdev(dev);
 
-	flush_scheduled_work();
-
 	vxge_debug_init(vdev->level_trace, "%s: ethernet device unregistered",
 			buf);
 	vxge_debug_entryexit(vdev->level_trace,	"%s: %s:%d  Exiting...", buf,
@@ -3476,7 +3461,7 @@ vxge_callback_crit_err(struct __vxge_hw_device *hldev,
 			enum vxge_hw_event type, u64 vp_id)
 {
 	struct net_device *dev = hldev->ndev;
-	struct vxgedev *vdev = (struct vxgedev *)netdev_priv(dev);
+	struct vxgedev *vdev = netdev_priv(dev);
 	struct vxge_vpath *vpath = NULL;
 	int vpath_idx;
 
@@ -3699,9 +3684,9 @@ static int __devinit vxge_config_vpaths(
 		device_config->vp_config[i].tti.timer_ac_en =
 				VXGE_HW_TIM_TIMER_AC_ENABLE;
 
-		/* For msi-x with napi (each vector
-		has a handler of its own) -
-		Set CI to OFF for all vpaths */
+		/* For msi-x with napi (each vector has a handler of its own) -
+		 * Set CI to OFF for all vpaths
+		 */
 		device_config->vp_config[i].tti.timer_ci_en =
 			VXGE_HW_TIM_TIMER_CI_DISABLE;
 
@@ -3731,10 +3716,13 @@ static int __devinit vxge_config_vpaths(
 
 		device_config->vp_config[i].ring.ring_blocks  =
 						VXGE_HW_DEF_RING_BLOCKS;
+
 		device_config->vp_config[i].ring.buffer_mode =
 			VXGE_HW_RING_RXD_BUFFER_MODE_1;
+
 		device_config->vp_config[i].ring.rxds_limit  =
 				VXGE_HW_DEF_RING_RXDS_LIMIT;
+
 		device_config->vp_config[i].ring.scatter_mode =
 					VXGE_HW_RING_SCATTER_MODE_A;
 
@@ -3814,6 +3802,7 @@ static void __devinit vxge_device_config_init(
 		device_config->intr_mode = VXGE_HW_INTR_MODE_MSIX;
 		break;
 	}
+
 	/* Timer period between device poll */
 	device_config->device_poll_millis = VXGE_TIMER_DELAY;
 
@@ -3825,16 +3814,10 @@ static void __devinit vxge_device_config_init(
 
 	vxge_debug_ll_config(VXGE_TRACE, "%s : Device Config Params ",
 			__func__);
-	vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_initial : %d",
-			device_config->dma_blockpool_initial);
-	vxge_debug_ll_config(VXGE_TRACE, "dma_blockpool_max : %d",
-			device_config->dma_blockpool_max);
 	vxge_debug_ll_config(VXGE_TRACE, "intr_mode : %d",
 			device_config->intr_mode);
 	vxge_debug_ll_config(VXGE_TRACE, "device_poll_millis : %d",
 			device_config->device_poll_millis);
-	vxge_debug_ll_config(VXGE_TRACE, "rts_mac_en : %d",
-			device_config->rts_mac_en);
 	vxge_debug_ll_config(VXGE_TRACE, "rth_en : %d",
 			device_config->rth_en);
 	vxge_debug_ll_config(VXGE_TRACE, "rth_it_type : %d",
@@ -3923,9 +3906,6 @@ static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask)
 		vxge_debug_init(VXGE_TRACE,
 			"%s: MAC Address learning enabled", vdev->ndev->name);
 
-	vxge_debug_init(VXGE_TRACE,
-		"%s: Rx doorbell mode enabled", vdev->ndev->name);
-
 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
 		if (!vxge_bVALn(vpath_mask, i, 1))
 			continue;
@@ -3938,14 +3918,6 @@ static void __devinit vxge_print_parm(struct vxgedev *vdev, u64 vpath_mask)
 			((struct __vxge_hw_device  *)(vdev->devh))->
 				config.vp_config[i].rpa_strip_vlan_tag
 			? "Enabled" : "Disabled");
-		vxge_debug_init(VXGE_TRACE,
-			"%s: Ring blocks : %d", vdev->ndev->name,
-			((struct __vxge_hw_device  *)(vdev->devh))->
-				config.vp_config[i].ring.ring_blocks);
-		vxge_debug_init(VXGE_TRACE,
-			"%s: Fifo blocks : %d", vdev->ndev->name,
-			((struct __vxge_hw_device  *)(vdev->devh))->
-				config.vp_config[i].fifo.fifo_blocks);
 		vxge_debug_ll_config(VXGE_TRACE,
 			"%s: Max frags : %d", vdev->ndev->name,
 			((struct __vxge_hw_device  *)(vdev->devh))->
@@ -3985,8 +3957,7 @@ static int vxge_pm_resume(struct pci_dev *pdev)
 static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev,
 						pci_channel_state_t state)
 {
-	struct __vxge_hw_device *hldev =
-		(struct __vxge_hw_device  *)pci_get_drvdata(pdev);
+	struct __vxge_hw_device *hldev = pci_get_drvdata(pdev);
 	struct net_device *netdev = hldev->ndev;
 
 	netif_device_detach(netdev);
@@ -4015,8 +3986,7 @@ static pci_ers_result_t vxge_io_error_detected(struct pci_dev *pdev,
  */
 static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev)
 {
-	struct __vxge_hw_device *hldev =
-		(struct __vxge_hw_device  *)pci_get_drvdata(pdev);
+	struct __vxge_hw_device *hldev = pci_get_drvdata(pdev);
 	struct net_device *netdev = hldev->ndev;
 
 	struct vxgedev *vdev = netdev_priv(netdev);
@@ -4027,7 +3997,7 @@ static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev)
 	}
 
 	pci_set_master(pdev);
-	vxge_reset(vdev);
+	do_vxge_reset(vdev, VXGE_LL_FULL_RESET);
 
 	return PCI_ERS_RESULT_RECOVERED;
 }
@@ -4041,8 +4011,7 @@ static pci_ers_result_t vxge_io_slot_reset(struct pci_dev *pdev)
  */
 static void vxge_io_resume(struct pci_dev *pdev)
 {
-	struct __vxge_hw_device *hldev =
-		(struct __vxge_hw_device  *)pci_get_drvdata(pdev);
+	struct __vxge_hw_device *hldev = pci_get_drvdata(pdev);
 	struct net_device *netdev = hldev->ndev;
 
 	if (netif_running(netdev)) {
@@ -4222,6 +4191,20 @@ static int vxge_probe_fw_update(struct vxgedev *vdev)
 	return ret;
 }
 
+static int __devinit is_sriov_initialized(struct pci_dev *pdev)
+{
+	int pos;
+	u16 ctrl;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+	if (pos) {
+		pci_read_config_word(pdev, pos + PCI_SRIOV_CTRL, &ctrl);
+		if (ctrl & PCI_SRIOV_CTRL_VFE)
+			return 1;
+	}
+	return 0;
+}
+
 /**
  * vxge_probe
  * @pdev : structure containing the PCI related information of the device.
@@ -4259,9 +4242,10 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 	attr.pdev = pdev;
 
 	/* In SRIOV-17 mode, functions of the same adapter
-	 * can be deployed on different buses */
-	if ((!pdev->is_virtfn) && ((bus != pdev->bus->number) ||
-		(device != PCI_SLOT(pdev->devfn))))
+	 * can be deployed on different buses
+	 */
+	if (((bus != pdev->bus->number) || (device != PCI_SLOT(pdev->devfn))) &&
+	    !pdev->is_virtfn)
 		new_device = 1;
 
 	bus = pdev->bus->number;
@@ -4279,6 +4263,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 		driver_config->config_dev_cnt = 0;
 		driver_config->total_dev_cnt = 0;
 	}
+
 	/* Now making the CPU based no of vpath calculation
 	 * applicable for individual functions as well.
 	 */
@@ -4301,11 +4286,11 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 		goto _exit0;
 	}
 
-	ll_config = kzalloc(sizeof(*ll_config), GFP_KERNEL);
+	ll_config = kzalloc(sizeof(struct vxge_config), GFP_KERNEL);
 	if (!ll_config) {
 		ret = -ENOMEM;
 		vxge_debug_init(VXGE_ERR,
-			"ll_config : malloc failed %s %d",
+			"device_config : malloc failed %s %d",
 			__FILE__, __LINE__);
 		goto _exit0;
 	}
@@ -4349,7 +4334,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 		goto _exit1;
 	}
 
-	if (pci_request_regions(pdev, VXGE_DRIVER_NAME)) {
+	if (pci_request_region(pdev, 0, VXGE_DRIVER_NAME)) {
 		vxge_debug_init(VXGE_ERR,
 			"%s : request regions failed", __func__);
 		ret = -ENODEV;
@@ -4408,14 +4393,13 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 		num_vfs = vxge_get_num_vfs(function_mode) - 1;
 
 	/* Enable SRIOV mode, if firmware has SRIOV support and if it is a PF */
-	if (is_sriov(function_mode) && (max_config_dev > 1) &&
-		(ll_config->intr_type != INTA) &&
-		(is_privileged == VXGE_HW_OK)) {
-		ret = pci_enable_sriov(pdev, ((max_config_dev - 1) < num_vfs)
-			? (max_config_dev - 1) : num_vfs);
+	if (is_sriov(function_mode) && !is_sriov_initialized(pdev) &&
+	   (ll_config->intr_type != INTA)) {
+		ret = pci_enable_sriov(pdev, num_vfs);
 		if (ret)
 			vxge_debug_ll_config(VXGE_ERR,
 				"Failed in enabling SRIOV mode: %d\n", ret);
+			/* No need to fail out, as an error here is non-fatal */
 	}
 
 	/*
@@ -4606,9 +4590,7 @@ vxge_probe(struct pci_dev *pdev, const struct pci_device_id *pre)
 
 	/* Copy the station mac address to the list */
 	for (i = 0; i < vdev->no_of_vpath; i++) {
-		entry =	(struct vxge_mac_addrs *)
-				kzalloc(sizeof(struct vxge_mac_addrs),
-					GFP_KERNEL);
+		entry =	kzalloc(sizeof(struct vxge_mac_addrs), GFP_KERNEL);
 		if (NULL == entry) {
 			vxge_debug_init(VXGE_ERR,
 				"%s: mac_addr_list : memory allocation failed",
@@ -4665,7 +4647,7 @@ _exit4:
 _exit3:
 	iounmap(attr.bar0);
 _exit2:
-	pci_release_regions(pdev);
+	pci_release_region(pdev, 0);
 _exit1:
 	pci_disable_device(pdev);
 _exit0:
@@ -4689,7 +4671,7 @@ static void __devexit vxge_remove(struct pci_dev *pdev)
 	struct net_device *dev;
 	int i = 0;
 
-	hldev = (struct __vxge_hw_device  *)pci_get_drvdata(pdev);
+	hldev = pci_get_drvdata(pdev);
 
 	if (hldev == NULL)
 		return;
@@ -4713,8 +4695,6 @@ static void __devexit vxge_remove(struct pci_dev *pdev)
 
 	iounmap(vdev->bar0);
 
-	pci_disable_sriov(pdev);
-
 	/* we are safe to free it now */
 	free_netdev(dev);
 
@@ -4724,7 +4704,7 @@ static void __devexit vxge_remove(struct pci_dev *pdev)
 	vxge_hw_device_terminate(hldev);
 
 	pci_disable_device(pdev);
-	pci_release_regions(pdev);
+	pci_release_region(pdev, 0);
 	pci_set_drvdata(pdev, NULL);
 	vxge_debug_entryexit(vdev->level_trace,	"%s:%d  Exiting...", __func__,
 			     __LINE__);
@@ -4763,6 +4743,10 @@ vxge_starter(void)
 		return -ENOMEM;
 
 	ret = pci_register_driver(&vxge_driver);
+	if (ret) {
+		kfree(driver_config);
+		goto err;
+	}
 
 	if (driver_config->config_dev_cnt &&
 	   (driver_config->config_dev_cnt != driver_config->total_dev_cnt))
@@ -4770,10 +4754,7 @@ vxge_starter(void)
 			"%s: Configured %d of %d devices",
 			VXGE_DRIVER_NAME, driver_config->config_dev_cnt,
 			driver_config->total_dev_cnt);
-
-	if (ret)
-		kfree(driver_config);
-
+err:
 	return ret;
 }
 
diff --git a/drivers/net/vxge/vxge-main.h b/drivers/net/vxge/vxge-main.h
index 953cb0ded3e..5746fedc356 100644
--- a/drivers/net/vxge/vxge-main.h
+++ b/drivers/net/vxge/vxge-main.h
@@ -305,8 +305,8 @@ struct vxge_vpath {
 	int is_configured;
 	int is_open;
 	struct vxgedev *vdev;
-	u8 (macaddr)[ETH_ALEN];
-	u8 (macmask)[ETH_ALEN];
+	u8 macaddr[ETH_ALEN];
+	u8 macmask[ETH_ALEN];
 
 #define VXGE_MAX_LEARN_MAC_ADDR_CNT	2048
 	/* mac addresses currently programmed into NIC */
@@ -395,6 +395,7 @@ struct vxgedev {
 	u32 		level_err;
 	u32 		level_trace;
 	char		fw_version[VXGE_HW_FW_STRLEN];
+	struct work_struct reset_task;
 };
 
 struct vxge_rx_priv {
@@ -420,10 +421,8 @@ struct vxge_tx_priv {
 		mod_timer(&timer, (jiffies + exp)); \
 	} while (0);
 
-extern void vxge_initialize_ethtool_ops(struct net_device *ndev);
-
+void vxge_initialize_ethtool_ops(struct net_device *ndev);
 enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev);
-
 int vxge_fw_upgrade(struct vxgedev *vdev, char *fw_name, int override);
 
 /**
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index 4bdb611a684..4c10d6c4075 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -17,13 +17,6 @@
 #include "vxge-config.h"
 #include "vxge-main.h"
 
-static enum vxge_hw_status
-__vxge_hw_device_handle_error(struct __vxge_hw_device *hldev,
-			      u32 vp_id, enum vxge_hw_event type);
-static enum vxge_hw_status
-__vxge_hw_vpath_alarm_process(struct __vxge_hw_virtualpath *vpath,
-			      u32 skip_alarms);
-
 /*
  * vxge_hw_vpath_intr_enable - Enable vpath interrupts.
  * @vp: Virtual Path handle.
@@ -419,6 +412,384 @@ void vxge_hw_device_flush_io(struct __vxge_hw_device *hldev)
 }
 
 /**
+ * __vxge_hw_device_handle_error - Handle error
+ * @hldev: HW device
+ * @vp_id: Vpath Id
+ * @type: Error type. Please see enum vxge_hw_event{}
+ *
+ * Handle error.
+ */
+static enum vxge_hw_status
+__vxge_hw_device_handle_error(struct __vxge_hw_device *hldev, u32 vp_id,
+			      enum vxge_hw_event type)
+{
+	switch (type) {
+	case VXGE_HW_EVENT_UNKNOWN:
+		break;
+	case VXGE_HW_EVENT_RESET_START:
+	case VXGE_HW_EVENT_RESET_COMPLETE:
+	case VXGE_HW_EVENT_LINK_DOWN:
+	case VXGE_HW_EVENT_LINK_UP:
+		goto out;
+	case VXGE_HW_EVENT_ALARM_CLEARED:
+		goto out;
+	case VXGE_HW_EVENT_ECCERR:
+	case VXGE_HW_EVENT_MRPCIM_ECCERR:
+		goto out;
+	case VXGE_HW_EVENT_FIFO_ERR:
+	case VXGE_HW_EVENT_VPATH_ERR:
+	case VXGE_HW_EVENT_CRITICAL_ERR:
+	case VXGE_HW_EVENT_SERR:
+		break;
+	case VXGE_HW_EVENT_SRPCIM_SERR:
+	case VXGE_HW_EVENT_MRPCIM_SERR:
+		goto out;
+	case VXGE_HW_EVENT_SLOT_FREEZE:
+		break;
+	default:
+		vxge_assert(0);
+		goto out;
+	}
+
+	/* notify driver */
+	if (hldev->uld_callbacks.crit_err)
+		hldev->uld_callbacks.crit_err(
+			(struct __vxge_hw_device *)hldev,
+			type, vp_id);
+out:
+
+	return VXGE_HW_OK;
+}
+
+/*
+ * __vxge_hw_device_handle_link_down_ind
+ * @hldev: HW device handle.
+ *
+ * Link down indication handler. The function is invoked by HW when
+ * Titan indicates that the link is down.
+ */
+static enum vxge_hw_status
+__vxge_hw_device_handle_link_down_ind(struct __vxge_hw_device *hldev)
+{
+	/*
+	 * If the previous link state is not down, return.
+	 */
+	if (hldev->link_state == VXGE_HW_LINK_DOWN)
+		goto exit;
+
+	hldev->link_state = VXGE_HW_LINK_DOWN;
+
+	/* notify driver */
+	if (hldev->uld_callbacks.link_down)
+		hldev->uld_callbacks.link_down(hldev);
+exit:
+	return VXGE_HW_OK;
+}
+
+/*
+ * __vxge_hw_device_handle_link_up_ind
+ * @hldev: HW device handle.
+ *
+ * Link up indication handler. The function is invoked by HW when
+ * Titan indicates that the link is up for programmable amount of time.
+ */
+static enum vxge_hw_status
+__vxge_hw_device_handle_link_up_ind(struct __vxge_hw_device *hldev)
+{
+	/*
+	 * If the previous link state is not down, return.
+	 */
+	if (hldev->link_state == VXGE_HW_LINK_UP)
+		goto exit;
+
+	hldev->link_state = VXGE_HW_LINK_UP;
+
+	/* notify driver */
+	if (hldev->uld_callbacks.link_up)
+		hldev->uld_callbacks.link_up(hldev);
+exit:
+	return VXGE_HW_OK;
+}
+
+/*
+ * __vxge_hw_vpath_alarm_process - Process Alarms.
+ * @vpath: Virtual Path.
+ * @skip_alarms: Do not clear the alarms
+ *
+ * Process vpath alarms.
+ *
+ */
+static enum vxge_hw_status
+__vxge_hw_vpath_alarm_process(struct __vxge_hw_virtualpath *vpath,
+			      u32 skip_alarms)
+{
+	u64 val64;
+	u64 alarm_status;
+	u64 pic_status;
+	struct __vxge_hw_device *hldev = NULL;
+	enum vxge_hw_event alarm_event = VXGE_HW_EVENT_UNKNOWN;
+	u64 mask64;
+	struct vxge_hw_vpath_stats_sw_info *sw_stats;
+	struct vxge_hw_vpath_reg __iomem *vp_reg;
+
+	if (vpath == NULL) {
+		alarm_event = VXGE_HW_SET_LEVEL(VXGE_HW_EVENT_UNKNOWN,
+			alarm_event);
+		goto out2;
+	}
+
+	hldev = vpath->hldev;
+	vp_reg = vpath->vp_reg;
+	alarm_status = readq(&vp_reg->vpath_general_int_status);
+
+	if (alarm_status == VXGE_HW_ALL_FOXES) {
+		alarm_event = VXGE_HW_SET_LEVEL(VXGE_HW_EVENT_SLOT_FREEZE,
+			alarm_event);
+		goto out;
+	}
+
+	sw_stats = vpath->sw_stats;
+
+	if (alarm_status & ~(
+		VXGE_HW_VPATH_GENERAL_INT_STATUS_PIC_INT |
+		VXGE_HW_VPATH_GENERAL_INT_STATUS_PCI_INT |
+		VXGE_HW_VPATH_GENERAL_INT_STATUS_WRDMA_INT |
+		VXGE_HW_VPATH_GENERAL_INT_STATUS_XMAC_INT)) {
+		sw_stats->error_stats.unknown_alarms++;
+
+		alarm_event = VXGE_HW_SET_LEVEL(VXGE_HW_EVENT_UNKNOWN,
+			alarm_event);
+		goto out;
+	}
+
+	if (alarm_status & VXGE_HW_VPATH_GENERAL_INT_STATUS_XMAC_INT) {
+
+		val64 = readq(&vp_reg->xgmac_vp_int_status);
+
+		if (val64 &
+		VXGE_HW_XGMAC_VP_INT_STATUS_ASIC_NTWK_VP_ERR_ASIC_NTWK_VP_INT) {
+
+			val64 = readq(&vp_reg->asic_ntwk_vp_err_reg);
+
+			if (((val64 &
+			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT) &&
+			     (!(val64 &
+				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK))) ||
+			    ((val64 &
+			     VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT_OCCURR) &&
+			     (!(val64 &
+				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK_OCCURR)
+				     ))) {
+				sw_stats->error_stats.network_sustained_fault++;
+
+				writeq(
+				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT,
+					&vp_reg->asic_ntwk_vp_err_mask);
+
+				__vxge_hw_device_handle_link_down_ind(hldev);
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_LINK_DOWN, alarm_event);
+			}
+
+			if (((val64 &
+			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK) &&
+			     (!(val64 &
+				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT))) ||
+			    ((val64 &
+			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK_OCCURR) &&
+			     (!(val64 &
+				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT_OCCURR)
+				     ))) {
+
+				sw_stats->error_stats.network_sustained_ok++;
+
+				writeq(
+				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK,
+					&vp_reg->asic_ntwk_vp_err_mask);
+
+				__vxge_hw_device_handle_link_up_ind(hldev);
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_LINK_UP, alarm_event);
+			}
+
+			writeq(VXGE_HW_INTR_MASK_ALL,
+				&vp_reg->asic_ntwk_vp_err_reg);
+
+			alarm_event = VXGE_HW_SET_LEVEL(
+				VXGE_HW_EVENT_ALARM_CLEARED, alarm_event);
+
+			if (skip_alarms)
+				return VXGE_HW_OK;
+		}
+	}
+
+	if (alarm_status & VXGE_HW_VPATH_GENERAL_INT_STATUS_PIC_INT) {
+
+		pic_status = readq(&vp_reg->vpath_ppif_int_status);
+
+		if (pic_status &
+		    VXGE_HW_VPATH_PPIF_INT_STATUS_GENERAL_ERRORS_GENERAL_INT) {
+
+			val64 = readq(&vp_reg->general_errors_reg);
+			mask64 = readq(&vp_reg->general_errors_mask);
+
+			if ((val64 &
+				VXGE_HW_GENERAL_ERRORS_REG_INI_SERR_DET) &
+				~mask64) {
+				sw_stats->error_stats.ini_serr_det++;
+
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_SERR, alarm_event);
+			}
+
+			if ((val64 &
+			    VXGE_HW_GENERAL_ERRORS_REG_DBLGEN_FIFO0_OVRFLOW) &
+				~mask64) {
+				sw_stats->error_stats.dblgen_fifo0_overflow++;
+
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_FIFO_ERR, alarm_event);
+			}
+
+			if ((val64 &
+			    VXGE_HW_GENERAL_ERRORS_REG_STATSB_PIF_CHAIN_ERR) &
+				~mask64)
+				sw_stats->error_stats.statsb_pif_chain_error++;
+
+			if ((val64 &
+			   VXGE_HW_GENERAL_ERRORS_REG_STATSB_DROP_TIMEOUT_REQ) &
+				~mask64)
+				sw_stats->error_stats.statsb_drop_timeout++;
+
+			if ((val64 &
+				VXGE_HW_GENERAL_ERRORS_REG_TGT_ILLEGAL_ACCESS) &
+				~mask64)
+				sw_stats->error_stats.target_illegal_access++;
+
+			if (!skip_alarms) {
+				writeq(VXGE_HW_INTR_MASK_ALL,
+					&vp_reg->general_errors_reg);
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_ALARM_CLEARED,
+					alarm_event);
+			}
+		}
+
+		if (pic_status &
+		    VXGE_HW_VPATH_PPIF_INT_STATUS_KDFCCTL_ERRORS_KDFCCTL_INT) {
+
+			val64 = readq(&vp_reg->kdfcctl_errors_reg);
+			mask64 = readq(&vp_reg->kdfcctl_errors_mask);
+
+			if ((val64 &
+			    VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO0_OVRWR) &
+				~mask64) {
+				sw_stats->error_stats.kdfcctl_fifo0_overwrite++;
+
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_FIFO_ERR,
+					alarm_event);
+			}
+
+			if ((val64 &
+			    VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO0_POISON) &
+				~mask64) {
+				sw_stats->error_stats.kdfcctl_fifo0_poison++;
+
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_FIFO_ERR,
+					alarm_event);
+			}
+
+			if ((val64 &
+			    VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO0_DMA_ERR) &
+				~mask64) {
+				sw_stats->error_stats.kdfcctl_fifo0_dma_error++;
+
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_FIFO_ERR,
+					alarm_event);
+			}
+
+			if (!skip_alarms) {
+				writeq(VXGE_HW_INTR_MASK_ALL,
+					&vp_reg->kdfcctl_errors_reg);
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_ALARM_CLEARED,
+					alarm_event);
+			}
+		}
+
+	}
+
+	if (alarm_status & VXGE_HW_VPATH_GENERAL_INT_STATUS_WRDMA_INT) {
+
+		val64 = readq(&vp_reg->wrdma_alarm_status);
+
+		if (val64 & VXGE_HW_WRDMA_ALARM_STATUS_PRC_ALARM_PRC_INT) {
+
+			val64 = readq(&vp_reg->prc_alarm_reg);
+			mask64 = readq(&vp_reg->prc_alarm_mask);
+
+			if ((val64 & VXGE_HW_PRC_ALARM_REG_PRC_RING_BUMP)&
+				~mask64)
+				sw_stats->error_stats.prc_ring_bumps++;
+
+			if ((val64 & VXGE_HW_PRC_ALARM_REG_PRC_RXDCM_SC_ERR) &
+				~mask64) {
+				sw_stats->error_stats.prc_rxdcm_sc_err++;
+
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_VPATH_ERR,
+					alarm_event);
+			}
+
+			if ((val64 & VXGE_HW_PRC_ALARM_REG_PRC_RXDCM_SC_ABORT)
+				& ~mask64) {
+				sw_stats->error_stats.prc_rxdcm_sc_abort++;
+
+				alarm_event = VXGE_HW_SET_LEVEL(
+						VXGE_HW_EVENT_VPATH_ERR,
+						alarm_event);
+			}
+
+			if ((val64 & VXGE_HW_PRC_ALARM_REG_PRC_QUANTA_SIZE_ERR)
+				 & ~mask64) {
+				sw_stats->error_stats.prc_quanta_size_err++;
+
+				alarm_event = VXGE_HW_SET_LEVEL(
+					VXGE_HW_EVENT_VPATH_ERR,
+					alarm_event);
+			}
+
+			if (!skip_alarms) {
+				writeq(VXGE_HW_INTR_MASK_ALL,
+					&vp_reg->prc_alarm_reg);
+				alarm_event = VXGE_HW_SET_LEVEL(
+						VXGE_HW_EVENT_ALARM_CLEARED,
+						alarm_event);
+			}
+		}
+	}
+out:
+	hldev->stats.sw_dev_err_stats.vpath_alarms++;
+out2:
+	if ((alarm_event == VXGE_HW_EVENT_ALARM_CLEARED) ||
+		(alarm_event == VXGE_HW_EVENT_UNKNOWN))
+		return VXGE_HW_OK;
+
+	__vxge_hw_device_handle_error(hldev, vpath->vp_id, alarm_event);
+
+	if (alarm_event == VXGE_HW_EVENT_SERR)
+		return VXGE_HW_ERR_CRITICAL;
+
+	return (alarm_event == VXGE_HW_EVENT_SLOT_FREEZE) ?
+		VXGE_HW_ERR_SLOT_FREEZE :
+		(alarm_event == VXGE_HW_EVENT_FIFO_ERR) ? VXGE_HW_ERR_FIFO :
+		VXGE_HW_ERR_VPATH;
+}
+
+/**
  * vxge_hw_device_begin_irq - Begin IRQ processing.
  * @hldev: HW device handle.
  * @skip_alarms: Do not clear the alarms
@@ -513,108 +884,6 @@ exit:
 	return ret;
 }
 
-/*
- * __vxge_hw_device_handle_link_up_ind
- * @hldev: HW device handle.
- *
- * Link up indication handler. The function is invoked by HW when
- * Titan indicates that the link is up for programmable amount of time.
- */
-static enum vxge_hw_status
-__vxge_hw_device_handle_link_up_ind(struct __vxge_hw_device *hldev)
-{
-	/*
-	 * If the previous link state is not down, return.
-	 */
-	if (hldev->link_state == VXGE_HW_LINK_UP)
-		goto exit;
-
-	hldev->link_state = VXGE_HW_LINK_UP;
-
-	/* notify driver */
-	if (hldev->uld_callbacks.link_up)
-		hldev->uld_callbacks.link_up(hldev);
-exit:
-	return VXGE_HW_OK;
-}
-
-/*
- * __vxge_hw_device_handle_link_down_ind
- * @hldev: HW device handle.
- *
- * Link down indication handler. The function is invoked by HW when
- * Titan indicates that the link is down.
- */
-static enum vxge_hw_status
-__vxge_hw_device_handle_link_down_ind(struct __vxge_hw_device *hldev)
-{
-	/*
-	 * If the previous link state is not down, return.
-	 */
-	if (hldev->link_state == VXGE_HW_LINK_DOWN)
-		goto exit;
-
-	hldev->link_state = VXGE_HW_LINK_DOWN;
-
-	/* notify driver */
-	if (hldev->uld_callbacks.link_down)
-		hldev->uld_callbacks.link_down(hldev);
-exit:
-	return VXGE_HW_OK;
-}
-
-/**
- * __vxge_hw_device_handle_error - Handle error
- * @hldev: HW device
- * @vp_id: Vpath Id
- * @type: Error type. Please see enum vxge_hw_event{}
- *
- * Handle error.
- */
-static enum vxge_hw_status
-__vxge_hw_device_handle_error(
-		struct __vxge_hw_device *hldev,
-		u32 vp_id,
-		enum vxge_hw_event type)
-{
-	switch (type) {
-	case VXGE_HW_EVENT_UNKNOWN:
-		break;
-	case VXGE_HW_EVENT_RESET_START:
-	case VXGE_HW_EVENT_RESET_COMPLETE:
-	case VXGE_HW_EVENT_LINK_DOWN:
-	case VXGE_HW_EVENT_LINK_UP:
-		goto out;
-	case VXGE_HW_EVENT_ALARM_CLEARED:
-		goto out;
-	case VXGE_HW_EVENT_ECCERR:
-	case VXGE_HW_EVENT_MRPCIM_ECCERR:
-		goto out;
-	case VXGE_HW_EVENT_FIFO_ERR:
-	case VXGE_HW_EVENT_VPATH_ERR:
-	case VXGE_HW_EVENT_CRITICAL_ERR:
-	case VXGE_HW_EVENT_SERR:
-		break;
-	case VXGE_HW_EVENT_SRPCIM_SERR:
-	case VXGE_HW_EVENT_MRPCIM_SERR:
-		goto out;
-	case VXGE_HW_EVENT_SLOT_FREEZE:
-		break;
-	default:
-		vxge_assert(0);
-		goto out;
-	}
-
-	/* notify driver */
-	if (hldev->uld_callbacks.crit_err)
-		hldev->uld_callbacks.crit_err(
-			(struct __vxge_hw_device *)hldev,
-			type, vp_id);
-out:
-
-	return VXGE_HW_OK;
-}
-
 /**
  * vxge_hw_device_clear_tx_rx - Acknowledge (that is, clear) the
  * condition that has caused the Tx and RX interrupt.
@@ -699,8 +968,8 @@ _alloc_after_swap:
  * Posts a dtr to work array.
  *
  */
-static void vxge_hw_channel_dtr_post(struct __vxge_hw_channel *channel,
-				     void *dtrh)
+static void
+vxge_hw_channel_dtr_post(struct __vxge_hw_channel *channel, void *dtrh)
 {
 	vxge_assert(channel->work_arr[channel->post_index] == NULL);
 
@@ -911,10 +1180,6 @@ void vxge_hw_ring_rxd_post(struct __vxge_hw_ring *ring, void *rxdh)
  */
 void vxge_hw_ring_rxd_post_post_wmb(struct __vxge_hw_ring *ring, void *rxdh)
 {
-	struct __vxge_hw_channel *channel;
-
-	channel = &ring->channel;
-
 	wmb();
 	vxge_hw_ring_rxd_post_post(ring, rxdh);
 }
@@ -975,7 +1240,7 @@ enum vxge_hw_status vxge_hw_ring_rxd_next_completed(
 	*t_code	= (u8)VXGE_HW_RING_RXD_T_CODE_GET(control_0);
 
 	/* check whether it is not the end */
-	if (!own || ((*t_code == VXGE_HW_RING_T_CODE_FRM_DROP) && own)) {
+	if (!own || *t_code == VXGE_HW_RING_T_CODE_FRM_DROP) {
 
 		vxge_assert(((struct vxge_hw_ring_rxd_1 *)rxdp)->host_control !=
 				0);
@@ -1868,284 +2133,6 @@ exit:
 }
 
 /*
- * __vxge_hw_vpath_alarm_process - Process Alarms.
- * @vpath: Virtual Path.
- * @skip_alarms: Do not clear the alarms
- *
- * Process vpath alarms.
- *
- */
-static enum vxge_hw_status
-__vxge_hw_vpath_alarm_process(struct __vxge_hw_virtualpath *vpath,
-			      u32 skip_alarms)
-{
-	u64 val64;
-	u64 alarm_status;
-	u64 pic_status;
-	struct __vxge_hw_device *hldev = NULL;
-	enum vxge_hw_event alarm_event = VXGE_HW_EVENT_UNKNOWN;
-	u64 mask64;
-	struct vxge_hw_vpath_stats_sw_info *sw_stats;
-	struct vxge_hw_vpath_reg __iomem *vp_reg;
-
-	if (vpath == NULL) {
-		alarm_event = VXGE_HW_SET_LEVEL(VXGE_HW_EVENT_UNKNOWN,
-			alarm_event);
-		goto out2;
-	}
-
-	hldev = vpath->hldev;
-	vp_reg = vpath->vp_reg;
-	alarm_status = readq(&vp_reg->vpath_general_int_status);
-
-	if (alarm_status == VXGE_HW_ALL_FOXES) {
-		alarm_event = VXGE_HW_SET_LEVEL(VXGE_HW_EVENT_SLOT_FREEZE,
-			alarm_event);
-		goto out;
-	}
-
-	sw_stats = vpath->sw_stats;
-
-	if (alarm_status & ~(
-		VXGE_HW_VPATH_GENERAL_INT_STATUS_PIC_INT |
-		VXGE_HW_VPATH_GENERAL_INT_STATUS_PCI_INT |
-		VXGE_HW_VPATH_GENERAL_INT_STATUS_WRDMA_INT |
-		VXGE_HW_VPATH_GENERAL_INT_STATUS_XMAC_INT)) {
-		sw_stats->error_stats.unknown_alarms++;
-
-		alarm_event = VXGE_HW_SET_LEVEL(VXGE_HW_EVENT_UNKNOWN,
-			alarm_event);
-		goto out;
-	}
-
-	if (alarm_status & VXGE_HW_VPATH_GENERAL_INT_STATUS_XMAC_INT) {
-
-		val64 = readq(&vp_reg->xgmac_vp_int_status);
-
-		if (val64 &
-		VXGE_HW_XGMAC_VP_INT_STATUS_ASIC_NTWK_VP_ERR_ASIC_NTWK_VP_INT) {
-
-			val64 = readq(&vp_reg->asic_ntwk_vp_err_reg);
-
-			if (((val64 &
-			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT) &&
-			     (!(val64 &
-				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK))) ||
-			    ((val64 &
-			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT_OCCURR) &&
-			     (!(val64 &
-				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK_OCCURR)
-				     ))) {
-				sw_stats->error_stats.network_sustained_fault++;
-
-				writeq(
-				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT,
-					&vp_reg->asic_ntwk_vp_err_mask);
-
-				__vxge_hw_device_handle_link_down_ind(hldev);
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_LINK_DOWN, alarm_event);
-			}
-
-			if (((val64 &
-			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK) &&
-			     (!(val64 &
-				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT))) ||
-			    ((val64 &
-			      VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK_OCCURR) &&
-			     (!(val64 &
-				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_FLT_OCCURR)
-				     ))) {
-
-				sw_stats->error_stats.network_sustained_ok++;
-
-				writeq(
-				VXGE_HW_ASIC_NW_VP_ERR_REG_XMACJ_STN_OK,
-					&vp_reg->asic_ntwk_vp_err_mask);
-
-				__vxge_hw_device_handle_link_up_ind(hldev);
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_LINK_UP, alarm_event);
-			}
-
-			writeq(VXGE_HW_INTR_MASK_ALL,
-				&vp_reg->asic_ntwk_vp_err_reg);
-
-			alarm_event = VXGE_HW_SET_LEVEL(
-				VXGE_HW_EVENT_ALARM_CLEARED, alarm_event);
-
-			if (skip_alarms)
-				return VXGE_HW_OK;
-		}
-	}
-
-	if (alarm_status & VXGE_HW_VPATH_GENERAL_INT_STATUS_PIC_INT) {
-
-		pic_status = readq(&vp_reg->vpath_ppif_int_status);
-
-		if (pic_status &
-		    VXGE_HW_VPATH_PPIF_INT_STATUS_GENERAL_ERRORS_GENERAL_INT) {
-
-			val64 = readq(&vp_reg->general_errors_reg);
-			mask64 = readq(&vp_reg->general_errors_mask);
-
-			if ((val64 &
-				VXGE_HW_GENERAL_ERRORS_REG_INI_SERR_DET) &
-				~mask64) {
-				sw_stats->error_stats.ini_serr_det++;
-
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_SERR, alarm_event);
-			}
-
-			if ((val64 &
-			    VXGE_HW_GENERAL_ERRORS_REG_DBLGEN_FIFO0_OVRFLOW) &
-				~mask64) {
-				sw_stats->error_stats.dblgen_fifo0_overflow++;
-
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_FIFO_ERR, alarm_event);
-			}
-
-			if ((val64 &
-			    VXGE_HW_GENERAL_ERRORS_REG_STATSB_PIF_CHAIN_ERR) &
-				~mask64)
-				sw_stats->error_stats.statsb_pif_chain_error++;
-
-			if ((val64 &
-			   VXGE_HW_GENERAL_ERRORS_REG_STATSB_DROP_TIMEOUT_REQ) &
-				~mask64)
-				sw_stats->error_stats.statsb_drop_timeout++;
-
-			if ((val64 &
-				VXGE_HW_GENERAL_ERRORS_REG_TGT_ILLEGAL_ACCESS) &
-				~mask64)
-				sw_stats->error_stats.target_illegal_access++;
-
-			if (!skip_alarms) {
-				writeq(VXGE_HW_INTR_MASK_ALL,
-					&vp_reg->general_errors_reg);
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_ALARM_CLEARED,
-					alarm_event);
-			}
-		}
-
-		if (pic_status &
-		    VXGE_HW_VPATH_PPIF_INT_STATUS_KDFCCTL_ERRORS_KDFCCTL_INT) {
-
-			val64 = readq(&vp_reg->kdfcctl_errors_reg);
-			mask64 = readq(&vp_reg->kdfcctl_errors_mask);
-
-			if ((val64 &
-			    VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO0_OVRWR) &
-				~mask64) {
-				sw_stats->error_stats.kdfcctl_fifo0_overwrite++;
-
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_FIFO_ERR,
-					alarm_event);
-			}
-
-			if ((val64 &
-			    VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO0_POISON) &
-				~mask64) {
-				sw_stats->error_stats.kdfcctl_fifo0_poison++;
-
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_FIFO_ERR,
-					alarm_event);
-			}
-
-			if ((val64 &
-			    VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO0_DMA_ERR) &
-				~mask64) {
-				sw_stats->error_stats.kdfcctl_fifo0_dma_error++;
-
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_FIFO_ERR,
-					alarm_event);
-			}
-
-			if (!skip_alarms) {
-				writeq(VXGE_HW_INTR_MASK_ALL,
-					&vp_reg->kdfcctl_errors_reg);
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_ALARM_CLEARED,
-					alarm_event);
-			}
-		}
-
-	}
-
-	if (alarm_status & VXGE_HW_VPATH_GENERAL_INT_STATUS_WRDMA_INT) {
-
-		val64 = readq(&vp_reg->wrdma_alarm_status);
-
-		if (val64 & VXGE_HW_WRDMA_ALARM_STATUS_PRC_ALARM_PRC_INT) {
-
-			val64 = readq(&vp_reg->prc_alarm_reg);
-			mask64 = readq(&vp_reg->prc_alarm_mask);
-
-			if ((val64 & VXGE_HW_PRC_ALARM_REG_PRC_RING_BUMP)&
-				~mask64)
-				sw_stats->error_stats.prc_ring_bumps++;
-
-			if ((val64 & VXGE_HW_PRC_ALARM_REG_PRC_RXDCM_SC_ERR) &
-				~mask64) {
-				sw_stats->error_stats.prc_rxdcm_sc_err++;
-
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_VPATH_ERR,
-					alarm_event);
-			}
-
-			if ((val64 & VXGE_HW_PRC_ALARM_REG_PRC_RXDCM_SC_ABORT)
-				& ~mask64) {
-				sw_stats->error_stats.prc_rxdcm_sc_abort++;
-
-				alarm_event = VXGE_HW_SET_LEVEL(
-						VXGE_HW_EVENT_VPATH_ERR,
-						alarm_event);
-			}
-
-			if ((val64 & VXGE_HW_PRC_ALARM_REG_PRC_QUANTA_SIZE_ERR)
-				 & ~mask64) {
-				sw_stats->error_stats.prc_quanta_size_err++;
-
-				alarm_event = VXGE_HW_SET_LEVEL(
-					VXGE_HW_EVENT_VPATH_ERR,
-					alarm_event);
-			}
-
-			if (!skip_alarms) {
-				writeq(VXGE_HW_INTR_MASK_ALL,
-					&vp_reg->prc_alarm_reg);
-				alarm_event = VXGE_HW_SET_LEVEL(
-						VXGE_HW_EVENT_ALARM_CLEARED,
-						alarm_event);
-			}
-		}
-	}
-out:
-	hldev->stats.sw_dev_err_stats.vpath_alarms++;
-out2:
-	if ((alarm_event == VXGE_HW_EVENT_ALARM_CLEARED) ||
-		(alarm_event == VXGE_HW_EVENT_UNKNOWN))
-		return VXGE_HW_OK;
-
-	__vxge_hw_device_handle_error(hldev, vpath->vp_id, alarm_event);
-
-	if (alarm_event == VXGE_HW_EVENT_SERR)
-		return VXGE_HW_ERR_CRITICAL;
-
-	return (alarm_event == VXGE_HW_EVENT_SLOT_FREEZE) ?
-		VXGE_HW_ERR_SLOT_FREEZE :
-		(alarm_event == VXGE_HW_EVENT_FIFO_ERR) ? VXGE_HW_ERR_FIFO :
-		VXGE_HW_ERR_VPATH;
-}
-
-/*
  * vxge_hw_vpath_alarm_process - Process Alarms.
  * @vpath: Virtual Path.
  * @skip_alarms: Do not clear the alarms
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 1fceee87622..8c3103fb644 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -2081,10 +2081,6 @@ struct __vxge_hw_ring_rxd_priv {
 #endif
 };
 
-/* ========================= FIFO PRIVATE API ============================= */
-
-struct vxge_hw_fifo_attr;
-
 struct vxge_hw_mempool_cbs {
 	void (*item_func_alloc)(
 			struct vxge_hw_mempool *mempoolh,
@@ -2158,27 +2154,27 @@ enum vxge_hw_vpath_mac_addr_add_mode {
 enum vxge_hw_status
 vxge_hw_vpath_mac_addr_add(
 	struct __vxge_hw_vpath_handle *vpath_handle,
-	u8 (macaddr)[ETH_ALEN],
-	u8 (macaddr_mask)[ETH_ALEN],
+	u8 *macaddr,
+	u8 *macaddr_mask,
 	enum vxge_hw_vpath_mac_addr_add_mode duplicate_mode);
 
 enum vxge_hw_status
 vxge_hw_vpath_mac_addr_get(
 	struct __vxge_hw_vpath_handle *vpath_handle,
-	u8 (macaddr)[ETH_ALEN],
-	u8 (macaddr_mask)[ETH_ALEN]);
+	u8 *macaddr,
+	u8 *macaddr_mask);
 
 enum vxge_hw_status
 vxge_hw_vpath_mac_addr_get_next(
 	struct __vxge_hw_vpath_handle *vpath_handle,
-	u8 (macaddr)[ETH_ALEN],
-	u8 (macaddr_mask)[ETH_ALEN]);
+	u8 *macaddr,
+	u8 *macaddr_mask);
 
 enum vxge_hw_status
 vxge_hw_vpath_mac_addr_delete(
 	struct __vxge_hw_vpath_handle *vpath_handle,
-	u8 (macaddr)[ETH_ALEN],
-	u8 (macaddr_mask)[ETH_ALEN]);
+	u8 *macaddr,
+	u8 *macaddr_mask);
 
 enum vxge_hw_status
 vxge_hw_vpath_vid_add(
@@ -2285,6 +2281,7 @@ vxge_hw_channel_dtr_free(struct __vxge_hw_channel *channel, void *dtrh);
 
 int
 vxge_hw_channel_dtr_count(struct __vxge_hw_channel *channel);
+
 void
 vxge_hw_vpath_tti_ci_set(struct __vxge_hw_device *hldev, u32 vp_id);
 
diff --git a/drivers/net/vxge/vxge-version.h b/drivers/net/vxge/vxge-version.h
index f05bb2f55e7..ad2f99b9bcf 100644
--- a/drivers/net/vxge/vxge-version.h
+++ b/drivers/net/vxge/vxge-version.h
@@ -15,9 +15,9 @@
 #define VXGE_VERSION_H
 
 #define VXGE_VERSION_MAJOR	"2"
-#define VXGE_VERSION_MINOR	"0"
-#define VXGE_VERSION_FIX	"10"
-#define VXGE_VERSION_BUILD	"21808"
+#define VXGE_VERSION_MINOR	"5"
+#define VXGE_VERSION_FIX	"1"
+#define VXGE_VERSION_BUILD	"22082"
 #define VXGE_VERSION_FOR	"k"
 
 #define VXGE_FW_VER(maj, min, bld) (((maj) << 16) + ((min) << 8) + (bld))
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index d45b08d1dbc..34cff6ce6d2 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -1358,7 +1358,7 @@ static int dscc4_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	return ret;
 }
 
-static int dscc4_match(struct thingie *p, int value)
+static int dscc4_match(const struct thingie *p, int value)
 {
 	int i;
 
@@ -1403,7 +1403,7 @@ done:
 static int dscc4_encoding_setting(struct dscc4_dev_priv *dpriv,
 				  struct net_device *dev)
 {
-	struct thingie encoding[] = {
+	static const struct thingie encoding[] = {
 		{ ENCODING_NRZ,		0x00000000 },
 		{ ENCODING_NRZI,	0x00200000 },
 		{ ENCODING_FM_MARK,	0x00400000 },
@@ -1442,7 +1442,7 @@ static int dscc4_loopback_setting(struct dscc4_dev_priv *dpriv,
 static int dscc4_crc_setting(struct dscc4_dev_priv *dpriv,
 			     struct net_device *dev)
 {
-	struct thingie crc[] = {
+	static const struct thingie crc[] = {
 		{ PARITY_CRC16_PR0_CCITT,	0x00000010 },
 		{ PARITY_CRC16_PR1_CCITT,	0x00000000 },
 		{ PARITY_CRC32_PR0_CCITT,	0x00000011 },
diff --git a/drivers/net/wan/hd64572.c b/drivers/net/wan/hd64572.c
index ea476cbd38b..e305274f83f 100644
--- a/drivers/net/wan/hd64572.c
+++ b/drivers/net/wan/hd64572.c
@@ -293,6 +293,7 @@ static inline void sca_tx_done(port_t *port)
 	struct net_device *dev = port->netdev;
 	card_t* card = port->card;
 	u8 stat;
+	unsigned count = 0;
 
 	spin_lock(&port->lock);
 
@@ -316,10 +317,12 @@ static inline void sca_tx_done(port_t *port)
 			dev->stats.tx_bytes += readw(&desc->len);
 		}
 		writeb(0, &desc->stat);	/* Free descriptor */
+		count++;
 		port->txlast = (port->txlast + 1) % card->tx_ring_buffers;
 	}
 
-	netif_wake_queue(dev);
+	if (count)
+		netif_wake_queue(dev);
 	spin_unlock(&port->lock);
 }
 
diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c
index d81ad839788..24297b274cd 100644
--- a/drivers/net/wan/x25_asy.c
+++ b/drivers/net/wan/x25_asy.c
@@ -498,7 +498,6 @@ norbuff:
 static int x25_asy_close(struct net_device *dev)
 {
 	struct x25_asy *sl = netdev_priv(dev);
-	int err;
 
 	spin_lock(&sl->lock);
 	if (sl->tty)
@@ -507,10 +506,6 @@ static int x25_asy_close(struct net_device *dev)
 	netif_stop_queue(dev);
 	sl->rcount = 0;
 	sl->xleft  = 0;
-	err = lapb_unregister(dev);
-	if (err != LAPB_OK)
-		printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
-			err);
 	spin_unlock(&sl->lock);
 	return 0;
 }
@@ -582,7 +577,7 @@ static int x25_asy_open_tty(struct tty_struct *tty)
 	if (err)
 		return err;
 	/* Done.  We have linked the TTY line to a channel. */
-	return sl->dev->base_addr;
+	return 0;
 }
 
 
@@ -595,6 +590,7 @@ static int x25_asy_open_tty(struct tty_struct *tty)
 static void x25_asy_close_tty(struct tty_struct *tty)
 {
 	struct x25_asy *sl = tty->disc_data;
+	int err;
 
 	/* First make sure we're connected. */
 	if (!sl || sl->magic != X25_ASY_MAGIC)
@@ -605,6 +601,11 @@ static void x25_asy_close_tty(struct tty_struct *tty)
 		dev_close(sl->dev);
 	rtnl_unlock();
 
+	err = lapb_unregister(sl->dev);
+	if (err != LAPB_OK)
+		printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
+			err);
+
 	tty->disc_data = NULL;
 	sl->tty = NULL;
 	x25_asy_free(sl);
diff --git a/drivers/net/wd.c b/drivers/net/wd.c
index f1549fff0ed..8831a3393ec 100644
--- a/drivers/net/wd.c
+++ b/drivers/net/wd.c
@@ -275,7 +275,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr)
 	dev->base_addr = ioaddr+WD_NIC_OFFSET;
 
 	if (dev->irq < 2) {
-		int irqmap[] = {9,3,5,7,10,11,15,4};
+		static const int irqmap[] = {9, 3, 5, 7, 10, 11, 15, 4};
 		int reg1 = inb(ioaddr+1);
 		int reg4 = inb(ioaddr+4);
 		if (ancient || reg1 == 0xff) {	/* Ack!! No way to read the IRQ! */
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index cdedab46ba2..f0603327aaf 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -92,54 +92,6 @@ MODULE_PARM_DESC(barkers,
 		 "signal; values are appended to a list--setting one value "
 		 "as zero cleans the existing list and starts a new one.");
 
-static
-struct i2400m_work *__i2400m_work_setup(
-	struct i2400m *i2400m, void (*fn)(struct work_struct *),
-	gfp_t gfp_flags, const void *pl, size_t pl_size)
-{
-	struct i2400m_work *iw;
-
-	iw = kzalloc(sizeof(*iw) + pl_size, gfp_flags);
-	if (iw == NULL)
-		return NULL;
-	iw->i2400m = i2400m_get(i2400m);
-	iw->pl_size = pl_size;
-	memcpy(iw->pl, pl, pl_size);
-	INIT_WORK(&iw->ws, fn);
-	return iw;
-}
-
-
-/*
- * Schedule i2400m's specific work on the system's queue.
- *
- * Used for a few cases where we really need it; otherwise, identical
- * to i2400m_queue_work().
- *
- * Returns < 0 errno code on error, 1 if ok.
- *
- * If it returns zero, something really bad happened, as it means the
- * works struct was already queued, but we have just allocated it, so
- * it should not happen.
- */
-static int i2400m_schedule_work(struct i2400m *i2400m,
-			 void (*fn)(struct work_struct *), gfp_t gfp_flags,
-			 const void *pl, size_t pl_size)
-{
-	int result;
-	struct i2400m_work *iw;
-
-	result = -ENOMEM;
-	iw = __i2400m_work_setup(i2400m, fn, gfp_flags, pl, pl_size);
-	if (iw != NULL) {
-		result = schedule_work(&iw->ws);
-		if (WARN_ON(result == 0))
-			result = -ENXIO;
-	}
-	return result;
-}
-
-
 /*
  * WiMAX stack operation: relay a message from user space
  *
@@ -648,17 +600,11 @@ EXPORT_SYMBOL_GPL(i2400m_post_reset);
 static
 void __i2400m_dev_reset_handle(struct work_struct *ws)
 {
-	int result;
-	struct i2400m_work *iw = container_of(ws, struct i2400m_work, ws);
-	const char *reason;
-	struct i2400m *i2400m = iw->i2400m;
+	struct i2400m *i2400m = container_of(ws, struct i2400m, reset_ws);
+	const char *reason = i2400m->reset_reason;
 	struct device *dev = i2400m_dev(i2400m);
 	struct i2400m_reset_ctx *ctx = i2400m->reset_ctx;
-
-	if (WARN_ON(iw->pl_size != sizeof(reason)))
-		reason = "SW BUG: reason n/a";
-	else
-		memcpy(&reason, iw->pl, sizeof(reason));
+	int result;
 
 	d_fnstart(3, dev, "(ws %p i2400m %p reason %s)\n", ws, i2400m, reason);
 
@@ -733,8 +679,6 @@ void __i2400m_dev_reset_handle(struct work_struct *ws)
 		}
 	}
 out:
-	i2400m_put(i2400m);
-	kfree(iw);
 	d_fnend(3, dev, "(ws %p i2400m %p reason %s) = void\n",
 		ws, i2400m, reason);
 }
@@ -754,8 +698,8 @@ out:
  */
 int i2400m_dev_reset_handle(struct i2400m *i2400m, const char *reason)
 {
-	return i2400m_schedule_work(i2400m, __i2400m_dev_reset_handle,
-				    GFP_ATOMIC, &reason, sizeof(reason));
+	i2400m->reset_reason = reason;
+	return schedule_work(&i2400m->reset_ws);
 }
 EXPORT_SYMBOL_GPL(i2400m_dev_reset_handle);
 
@@ -768,14 +712,9 @@ EXPORT_SYMBOL_GPL(i2400m_dev_reset_handle);
 static
 void __i2400m_error_recovery(struct work_struct *ws)
 {
-	struct i2400m_work *iw = container_of(ws, struct i2400m_work, ws);
-	struct i2400m *i2400m = iw->i2400m;
+	struct i2400m *i2400m = container_of(ws, struct i2400m, recovery_ws);
 
 	i2400m_reset(i2400m, I2400M_RT_BUS);
-
-	i2400m_put(i2400m);
-	kfree(iw);
-	return;
 }
 
 /*
@@ -805,18 +744,10 @@ void __i2400m_error_recovery(struct work_struct *ws)
  */
 void i2400m_error_recovery(struct i2400m *i2400m)
 {
-	struct device *dev = i2400m_dev(i2400m);
-
-	if (atomic_add_return(1, &i2400m->error_recovery) == 1) {
-		if (i2400m_schedule_work(i2400m, __i2400m_error_recovery,
-			GFP_ATOMIC, NULL, 0) < 0) {
-			dev_err(dev, "run out of memory for "
-				"scheduling an error recovery ?\n");
-			atomic_dec(&i2400m->error_recovery);
-		}
-	} else
+	if (atomic_add_return(1, &i2400m->error_recovery) == 1)
+		schedule_work(&i2400m->recovery_ws);
+	else
 		atomic_dec(&i2400m->error_recovery);
-	return;
 }
 EXPORT_SYMBOL_GPL(i2400m_error_recovery);
 
@@ -886,6 +817,10 @@ void i2400m_init(struct i2400m *i2400m)
 
 	mutex_init(&i2400m->init_mutex);
 	/* wake_tx_ws is initialized in i2400m_tx_setup() */
+
+	INIT_WORK(&i2400m->reset_ws, __i2400m_dev_reset_handle);
+	INIT_WORK(&i2400m->recovery_ws, __i2400m_error_recovery);
+
 	atomic_set(&i2400m->bus_reset_retries, 0);
 
 	i2400m->alive = 0;
@@ -1040,6 +975,9 @@ void i2400m_release(struct i2400m *i2400m)
 
 	i2400m_dev_stop(i2400m);
 
+	cancel_work_sync(&i2400m->reset_ws);
+	cancel_work_sync(&i2400m->recovery_ws);
+
 	i2400m_debugfs_rm(i2400m);
 	sysfs_remove_group(&i2400m->wimax_dev.net_dev->dev.kobj,
 			   &i2400m_dev_attr_group);
@@ -1083,8 +1021,6 @@ module_init(i2400m_driver_init);
 static
 void __exit i2400m_driver_exit(void)
 {
-	/* for scheds i2400m_dev_reset_handle() */
-	flush_scheduled_work();
 	i2400m_barker_db_exit();
 }
 module_exit(i2400m_driver_exit);
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 59ac7705e76..17ecaa41a80 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -632,6 +632,11 @@ struct i2400m {
 	struct work_struct wake_tx_ws;
 	struct sk_buff *wake_tx_skb;
 
+	struct work_struct reset_ws;
+	const char *reset_reason;
+
+	struct work_struct recovery_ws;
+
 	struct dentry *debugfs_dentry;
 	const char *fw_name;		/* name of the current firmware image */
 	unsigned long fw_version;	/* version of the firmware interface */
@@ -896,20 +901,6 @@ struct device *i2400m_dev(struct i2400m *i2400m)
 	return i2400m->wimax_dev.net_dev->dev.parent;
 }
 
-/*
- * Helper for scheduling simple work functions
- *
- * This struct can get any kind of payload attached (normally in the
- * form of a struct where you pack the stuff you want to pass to the
- * _work function).
- */
-struct i2400m_work {
-	struct work_struct ws;
-	struct i2400m *i2400m;
-	size_t pl_size;
-	u8 pl[0];
-};
-
 extern int i2400m_msg_check_status(const struct i2400m_l3l4_hdr *,
 				   char *, size_t);
 extern int i2400m_msg_size_check(struct i2400m *,
diff --git a/drivers/net/wimax/i2400m/sdio.c b/drivers/net/wimax/i2400m/sdio.c
index 9bfc26e1bc6..be428cae28d 100644
--- a/drivers/net/wimax/i2400m/sdio.c
+++ b/drivers/net/wimax/i2400m/sdio.c
@@ -590,7 +590,6 @@ module_init(i2400ms_driver_init);
 static
 void __exit i2400ms_driver_exit(void)
 {
-	flush_scheduled_work();	/* for the stuff we schedule */
 	sdio_unregister_driver(&i2400m_sdio_driver);
 }
 module_exit(i2400ms_driver_exit);
diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c
index d3365ac85dd..298f2b0b631 100644
--- a/drivers/net/wimax/i2400m/usb.c
+++ b/drivers/net/wimax/i2400m/usb.c
@@ -514,7 +514,7 @@ int i2400mu_probe(struct usb_interface *iface,
 #ifdef CONFIG_PM
 	iface->needs_remote_wakeup = 1;		/* autosuspend (15s delay) */
 	device_init_wakeup(dev, 1);
-	usb_dev->autosuspend_delay = 15 * HZ;
+	pm_runtime_set_autosuspend_delay(&usb_dev->dev, 15000);
 	usb_enable_autosuspend(usb_dev);
 #endif
 
@@ -780,7 +780,6 @@ module_init(i2400mu_driver_init);
 static
 void __exit i2400mu_driver_exit(void)
 {
-	flush_scheduled_work();	/* for the stuff we schedule from sysfs.c */
 	usb_deregister(&i2400mu_driver);
 }
 module_exit(i2400mu_driver_exit);
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 4de4410cd38..b4338f38939 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -279,6 +279,7 @@ source "drivers/net/wireless/libertas/Kconfig"
 source "drivers/net/wireless/orinoco/Kconfig"
 source "drivers/net/wireless/p54/Kconfig"
 source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/rtlwifi/Kconfig"
 source "drivers/net/wireless/wl1251/Kconfig"
 source "drivers/net/wireless/wl12xx/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 06f8ca26c5c..9760561a27a 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_B43LEGACY)		+= b43legacy/
 obj-$(CONFIG_ZD1211RW)		+= zd1211rw/
 obj-$(CONFIG_RTL8180)		+= rtl818x/
 obj-$(CONFIG_RTL8187)		+= rtl818x/
+obj-$(CONFIG_RTL8192CE)		+= rtlwifi/
 
 # 16-bit wireless PCMCIA client drivers
 obj-$(CONFIG_PCMCIA_RAYCS)	+= ray_cs.o
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index a36e7870b03..57a79b0475f 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -4652,24 +4652,18 @@ static ssize_t proc_write( struct file *file,
 			   size_t len,
 			   loff_t *offset )
 {
-	loff_t pos = *offset;
+	ssize_t ret;
 	struct proc_data *priv = file->private_data;
 
 	if (!priv->wbuffer)
 		return -EINVAL;
 
-	if (pos < 0)
-		return -EINVAL;
-	if (pos >= priv->maxwritelen)
-		return 0;
-	if (len > priv->maxwritelen - pos)
-		len = priv->maxwritelen - pos;
-	if (copy_from_user(priv->wbuffer + pos, buffer, len))
-		return -EFAULT;
-	if ( pos + len > priv->writelen )
-		priv->writelen = len + file->f_pos;
-	*offset = pos + len;
-	return len;
+	ret = simple_write_to_buffer(priv->wbuffer, priv->maxwritelen, offset,
+					buffer, len);
+	if (ret > 0)
+		priv->writelen = max_t(int, priv->writelen, *offset);
+
+	return ret;
 }
 
 static int proc_status_open(struct inode *inode, struct file *file)
diff --git a/drivers/net/wireless/ath/ar9170/cmd.c b/drivers/net/wireless/ath/ar9170/cmd.c
index 4604de09a8b..6452c5055a6 100644
--- a/drivers/net/wireless/ath/ar9170/cmd.c
+++ b/drivers/net/wireless/ath/ar9170/cmd.c
@@ -54,7 +54,7 @@ int ar9170_write_mem(struct ar9170 *ar, const __le32 *data, size_t len)
 
 int ar9170_write_reg(struct ar9170 *ar, const u32 reg, const u32 val)
 {
-	__le32 buf[2] = {
+	const __le32 buf[2] = {
 		cpu_to_le32(reg),
 		cpu_to_le32(val),
 	};
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index 5dbb5361fd5..d3be6f9816b 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -161,8 +161,7 @@ static void ar9170_usb_submit_urb(struct ar9170_usb *aru)
 static void ar9170_usb_tx_urb_complete_frame(struct urb *urb)
 {
 	struct sk_buff *skb = urb->context;
-	struct ar9170_usb *aru = (struct ar9170_usb *)
-	      usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+	struct ar9170_usb *aru = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 
 	if (unlikely(!aru)) {
 		dev_kfree_skb_irq(skb);
@@ -219,8 +218,7 @@ free:
 static void ar9170_usb_rx_completed(struct urb *urb)
 {
 	struct sk_buff *skb = urb->context;
-	struct ar9170_usb *aru = (struct ar9170_usb *)
-		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+	struct ar9170_usb *aru = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 	int err;
 
 	if (!aru)
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index 501050c0296..e43210c8585 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -126,6 +126,7 @@ struct ath_bus_ops {
 	void (*read_cachesize)(struct ath_common *common, int *csz);
 	bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
 	void (*bt_coex_prep)(struct ath_common *common);
+	void (*extn_synch_en)(struct ath_common *common);
 };
 
 struct ath_common {
@@ -162,6 +163,8 @@ struct ath_common {
 	struct ath_regulatory regulatory;
 	const struct ath_ops *ops;
 	const struct ath_bus_ops *bus_ops;
+
+	bool btcoex_enabled;
 };
 
 struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
@@ -178,4 +181,112 @@ bool ath_hw_keyreset(struct ath_common *common, u16 entry);
 void ath_hw_cycle_counters_update(struct ath_common *common);
 int32_t ath_hw_get_listen_time(struct ath_common *common);
 
+extern __attribute__ ((format (printf, 3, 4))) int
+ath_printk(const char *level, struct ath_common *common, const char *fmt, ...);
+
+#define ath_emerg(common, fmt, ...)				\
+	ath_printk(KERN_EMERG, common, fmt, ##__VA_ARGS__)
+#define ath_alert(common, fmt, ...)				\
+	ath_printk(KERN_ALERT, common, fmt, ##__VA_ARGS__)
+#define ath_crit(common, fmt, ...)				\
+	ath_printk(KERN_CRIT, common, fmt, ##__VA_ARGS__)
+#define ath_err(common, fmt, ...)				\
+	ath_printk(KERN_ERR, common, fmt, ##__VA_ARGS__)
+#define ath_warn(common, fmt, ...)				\
+	ath_printk(KERN_WARNING, common, fmt, ##__VA_ARGS__)
+#define ath_notice(common, fmt, ...)				\
+	ath_printk(KERN_NOTICE, common, fmt, ##__VA_ARGS__)
+#define ath_info(common, fmt, ...)				\
+	ath_printk(KERN_INFO, common, fmt, ##__VA_ARGS__)
+
+/**
+ * enum ath_debug_level - atheros wireless debug level
+ *
+ * @ATH_DBG_RESET: reset processing
+ * @ATH_DBG_QUEUE: hardware queue management
+ * @ATH_DBG_EEPROM: eeprom processing
+ * @ATH_DBG_CALIBRATE: periodic calibration
+ * @ATH_DBG_INTERRUPT: interrupt processing
+ * @ATH_DBG_REGULATORY: regulatory processing
+ * @ATH_DBG_ANI: adaptive noise immunitive processing
+ * @ATH_DBG_XMIT: basic xmit operation
+ * @ATH_DBG_BEACON: beacon handling
+ * @ATH_DBG_CONFIG: configuration of the hardware
+ * @ATH_DBG_FATAL: fatal errors, this is the default, DBG_DEFAULT
+ * @ATH_DBG_PS: power save processing
+ * @ATH_DBG_HWTIMER: hardware timer handling
+ * @ATH_DBG_BTCOEX: bluetooth coexistance
+ * @ATH_DBG_BSTUCK: stuck beacons
+ * @ATH_DBG_ANY: enable all debugging
+ *
+ * The debug level is used to control the amount and type of debugging output
+ * we want to see. Each driver has its own method for enabling debugging and
+ * modifying debug level states -- but this is typically done through a
+ * module parameter 'debug' along with a respective 'debug' debugfs file
+ * entry.
+ */
+enum ATH_DEBUG {
+	ATH_DBG_RESET		= 0x00000001,
+	ATH_DBG_QUEUE		= 0x00000002,
+	ATH_DBG_EEPROM		= 0x00000004,
+	ATH_DBG_CALIBRATE	= 0x00000008,
+	ATH_DBG_INTERRUPT	= 0x00000010,
+	ATH_DBG_REGULATORY	= 0x00000020,
+	ATH_DBG_ANI		= 0x00000040,
+	ATH_DBG_XMIT		= 0x00000080,
+	ATH_DBG_BEACON		= 0x00000100,
+	ATH_DBG_CONFIG		= 0x00000200,
+	ATH_DBG_FATAL		= 0x00000400,
+	ATH_DBG_PS		= 0x00000800,
+	ATH_DBG_HWTIMER		= 0x00001000,
+	ATH_DBG_BTCOEX		= 0x00002000,
+	ATH_DBG_WMI		= 0x00004000,
+	ATH_DBG_BSTUCK		= 0x00008000,
+	ATH_DBG_ANY		= 0xffffffff
+};
+
+#define ATH_DBG_DEFAULT (ATH_DBG_FATAL)
+
+#ifdef CONFIG_ATH_DEBUG
+
+#define ath_dbg(common, dbg_mask, fmt, ...)			\
+({								\
+	int rtn;						\
+	if ((common)->debug_mask & dbg_mask)			\
+		rtn = ath_printk(KERN_DEBUG, common, fmt,	\
+				 ##__VA_ARGS__);		\
+	else							\
+		rtn = 0;					\
+								\
+	rtn;							\
+})
+#define ATH_DBG_WARN(foo, arg...) WARN(foo, arg)
+#define ATH_DBG_WARN_ON_ONCE(foo) WARN_ON_ONCE(foo)
+
+#else
+
+static inline  __attribute__ ((format (printf, 3, 4))) int
+ath_dbg(struct ath_common *common, enum ATH_DEBUG dbg_mask,
+	const char *fmt, ...)
+{
+	return 0;
+}
+#define ATH_DBG_WARN(foo, arg...) do {} while (0)
+#define ATH_DBG_WARN_ON_ONCE(foo) ({				\
+	int __ret_warn_once = !!(foo);				\
+	unlikely(__ret_warn_once);				\
+})
+
+#endif /* CONFIG_ATH_DEBUG */
+
+/** Returns string describing opmode, or NULL if unknown mode. */
+#ifdef CONFIG_ATH_DEBUG
+const char *ath_opmode_to_string(enum nl80211_iftype opmode);
+#else
+static inline const char *ath_opmode_to_string(enum nl80211_iftype opmode)
+{
+	return "UNKNOWN";
+}
+#endif
+
 #endif /* ATH_H */
diff --git a/drivers/net/wireless/ath/ath5k/Kconfig b/drivers/net/wireless/ath/ath5k/Kconfig
index eb83b7b4d0e..e0793319389 100644
--- a/drivers/net/wireless/ath/ath5k/Kconfig
+++ b/drivers/net/wireless/ath/ath5k/Kconfig
@@ -1,9 +1,12 @@
 config ATH5K
 	tristate "Atheros 5xxx wireless cards support"
-	depends on PCI && MAC80211
+	depends on (PCI || ATHEROS_AR231X) && MAC80211
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
+	select AVERAGE
+	select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
+	select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros 5xxx chipset.
@@ -37,3 +40,16 @@ config ATH5K_DEBUG
 
 	  modprobe ath5k debug=0x00000400
 
+config ATH5K_AHB
+	bool "Atheros 5xxx AHB bus support"
+	depends on (ATHEROS_AR231X && !PCI)
+	---help---
+	  This adds support for WiSoC type chipsets of the 5xxx Atheros
+	  family.
+
+config ATH5K_PCI
+	bool "Atheros 5xxx PCI bus support"
+	depends on (!ATHEROS_AR231X && PCI)
+	---help---
+	  This adds support for PCI type chipsets of the 5xxx Atheros
+	  family.
diff --git a/drivers/net/wireless/ath/ath5k/Makefile b/drivers/net/wireless/ath/ath5k/Makefile
index 2242a140e4f..f60b3899afc 100644
--- a/drivers/net/wireless/ath/ath5k/Makefile
+++ b/drivers/net/wireless/ath/ath5k/Makefile
@@ -14,5 +14,8 @@ ath5k-y				+= led.o
 ath5k-y				+= rfkill.o
 ath5k-y				+= ani.o
 ath5k-y				+= sysfs.o
+ath5k-y				+= mac80211-ops.o
 ath5k-$(CONFIG_ATH5K_DEBUG)	+= debug.o
+ath5k-$(CONFIG_ATH5K_AHB)	+= ahb.o
+ath5k-$(CONFIG_ATH5K_PCI)	+= pci.o
 obj-$(CONFIG_ATH5K)		+= ath5k.o
diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c
new file mode 100644
index 00000000000..707cde14924
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/ahb.c
@@ -0,0 +1,219 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/nl80211.h>
+#include <linux/platform_device.h>
+#include <ar231x_platform.h>
+#include "ath5k.h"
+#include "debug.h"
+#include "base.h"
+#include "reg.h"
+#include "debug.h"
+
+/* return bus cachesize in 4B word units */
+static void ath5k_ahb_read_cachesize(struct ath_common *common, int *csz)
+{
+	*csz = L1_CACHE_BYTES >> 2;
+}
+
+bool ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
+{
+	struct ath5k_softc *sc = common->priv;
+	struct platform_device *pdev = to_platform_device(sc->dev);
+	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
+	u16 *eeprom, *eeprom_end;
+
+
+
+	bcfg = pdev->dev.platform_data;
+	eeprom = (u16 *) bcfg->radio;
+	eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ;
+
+	eeprom += off;
+	if (eeprom > eeprom_end)
+		return -EINVAL;
+
+	*data = *eeprom;
+	return 0;
+}
+
+int ath5k_hw_read_srev(struct ath5k_hw *ah)
+{
+	struct ath5k_softc *sc = ah->ah_sc;
+	struct platform_device *pdev = to_platform_device(sc->dev);
+	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
+	ah->ah_mac_srev = bcfg->devid;
+	return 0;
+}
+
+static const struct ath_bus_ops ath_ahb_bus_ops = {
+	.ath_bus_type = ATH_AHB,
+	.read_cachesize = ath5k_ahb_read_cachesize,
+	.eeprom_read = ath5k_ahb_eeprom_read,
+};
+
+/*Initialization*/
+static int ath_ahb_probe(struct platform_device *pdev)
+{
+	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
+	struct ath5k_softc *sc;
+	struct ieee80211_hw *hw;
+	struct resource *res;
+	void __iomem *mem;
+	int irq;
+	int ret = 0;
+	u32 reg;
+
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "no platform data specified\n");
+		ret = -EINVAL;
+		goto err_out;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no memory resource found\n");
+		ret = -ENXIO;
+		goto err_out;
+	}
+
+	mem = ioremap_nocache(res->start, res->end - res->start + 1);
+	if (mem == NULL) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto err_out;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no IRQ resource found\n");
+		ret = -ENXIO;
+		goto err_out;
+	}
+
+	irq = res->start;
+
+	hw = ieee80211_alloc_hw(sizeof(struct ath5k_softc), &ath5k_hw_ops);
+	if (hw == NULL) {
+		dev_err(&pdev->dev, "no memory for ieee80211_hw\n");
+		ret = -ENOMEM;
+		goto err_out;
+	}
+
+	sc = hw->priv;
+	sc->hw = hw;
+	sc->dev = &pdev->dev;
+	sc->iobase = mem;
+	sc->irq = irq;
+	sc->devid = bcfg->devid;
+
+	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
+		/* Enable WMAC AHB arbitration */
+		reg = __raw_readl((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+		reg |= AR5K_AR2315_AHB_ARB_CTL_WLAN;
+		__raw_writel(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+
+		/* Enable global WMAC swapping */
+		reg = __raw_readl((void __iomem *) AR5K_AR2315_BYTESWAP);
+		reg |= AR5K_AR2315_BYTESWAP_WMAC;
+		__raw_writel(reg, (void __iomem *) AR5K_AR2315_BYTESWAP);
+	} else {
+		/* Enable WMAC DMA access (assuming 5312 or 231x*/
+		/* TODO: check other platforms */
+		reg = __raw_readl((void __iomem *) AR5K_AR5312_ENABLE);
+		if (to_platform_device(sc->dev)->id == 0)
+			reg |= AR5K_AR5312_ENABLE_WLAN0;
+		else
+			reg |= AR5K_AR5312_ENABLE_WLAN1;
+		__raw_writel(reg, (void __iomem *) AR5K_AR5312_ENABLE);
+	}
+
+	ret = ath5k_init_softc(sc, &ath_ahb_bus_ops);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
+		ret = -ENODEV;
+		goto err_free_hw;
+	}
+
+	platform_set_drvdata(pdev, hw);
+
+	return 0;
+
+ err_free_hw:
+	ieee80211_free_hw(hw);
+	platform_set_drvdata(pdev, NULL);
+ err_out:
+	return ret;
+}
+
+static int ath_ahb_remove(struct platform_device *pdev)
+{
+	struct ar231x_board_config *bcfg = pdev->dev.platform_data;
+	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+	struct ath5k_softc *sc;
+	u32 reg;
+
+	if (!hw)
+		return 0;
+
+	sc = hw->priv;
+
+	if (bcfg->devid >= AR5K_SREV_AR2315_R6) {
+		/* Disable WMAC AHB arbitration */
+		reg = __raw_readl((void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+		reg &= ~AR5K_AR2315_AHB_ARB_CTL_WLAN;
+		__raw_writel(reg, (void __iomem *) AR5K_AR2315_AHB_ARB_CTL);
+	} else {
+		/*Stop DMA access */
+		reg = __raw_readl((void __iomem *) AR5K_AR5312_ENABLE);
+		if (to_platform_device(sc->dev)->id == 0)
+			reg &= ~AR5K_AR5312_ENABLE_WLAN0;
+		else
+			reg &= ~AR5K_AR5312_ENABLE_WLAN1;
+		__raw_writel(reg, (void __iomem *) AR5K_AR5312_ENABLE);
+	}
+
+	ath5k_deinit_softc(sc);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver ath_ahb_driver = {
+	.probe      = ath_ahb_probe,
+	.remove     = ath_ahb_remove,
+	.driver		= {
+		.name	= "ar231x-wmac",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init
+ath5k_ahb_init(void)
+{
+	return platform_driver_register(&ath_ahb_driver);
+}
+
+static void __exit
+ath5k_ahb_exit(void)
+{
+	platform_driver_unregister(&ath_ahb_driver);
+}
+
+module_init(ath5k_ahb_init);
+module_exit(ath5k_ahb_exit);
diff --git a/drivers/net/wireless/ath/ath5k/ani.c b/drivers/net/wireless/ath/ath5k/ani.c
index f1419198a47..f915f404302 100644
--- a/drivers/net/wireless/ath/ath5k/ani.c
+++ b/drivers/net/wireless/ath/ath5k/ani.c
@@ -58,20 +58,20 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level)
 {
 	/* TODO:
 	 * ANI documents suggest the following five levels to use, but the HAL
-	 * and ath9k use only use the last two levels, making this
+	 * and ath9k use only the last two levels, making this
 	 * essentially an on/off option. There *may* be a reason for this (???),
 	 * so i stick with the HAL version for now...
 	 */
 #if 0
-	const s8 hi[] = { -18, -18, -16, -14, -12 };
-	const s8 lo[] = { -52, -56, -60, -64, -70 };
-	const s8 sz[] = { -34, -41, -48, -55, -62 };
-	const s8 fr[] = { -70, -72, -75, -78, -80 };
+	static const s8 lo[] = { -52, -56, -60, -64, -70 };
+	static const s8 hi[] = { -18, -18, -16, -14, -12 };
+	static const s8 sz[] = { -34, -41, -48, -55, -62 };
+	static const s8 fr[] = { -70, -72, -75, -78, -80 };
 #else
-	const s8 sz[] = { -55, -62 };
-	const s8 lo[] = { -64, -70 };
-	const s8 hi[] = { -14, -12 };
-	const s8 fr[] = { -78, -80 };
+	static const s8 lo[] = { -64, -70 };
+	static const s8 hi[] = { -14, -12 };
+	static const s8 sz[] = { -55, -62 };
+	static const s8 fr[] = { -78, -80 };
 #endif
 	if (level < 0 || level >= ARRAY_SIZE(sz)) {
 		ATH5K_ERR(ah->ah_sc, "noise immuniy level %d out of range",
@@ -102,7 +102,7 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level)
 void
 ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level)
 {
-	const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
+	static const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
 
 	if (level < 0 || level >= ARRAY_SIZE(val) ||
 	    level > ah->ah_sc->ani_state.max_spur_level) {
@@ -127,7 +127,7 @@ ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level)
 void
 ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level)
 {
-	const int val[] = { 0, 4, 8 };
+	static const int val[] = { 0, 4, 8 };
 
 	if (level < 0 || level >= ARRAY_SIZE(val)) {
 		ATH5K_ERR(ah->ah_sc, "firstep level %d out of range", level);
@@ -151,12 +151,12 @@ ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level)
 void
 ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on)
 {
-	const int m1l[] = { 127, 50 };
-	const int m2l[] = { 127, 40 };
-	const int m1[] = { 127, 0x4d };
-	const int m2[] = { 127, 0x40 };
-	const int m2cnt[] = { 31, 16 };
-	const int m2lcnt[] = { 63, 48 };
+	static const int m1l[] = { 127, 50 };
+	static const int m2l[] = { 127, 40 };
+	static const int m1[] = { 127, 0x4d };
+	static const int m2[] = { 127, 0x40 };
+	static const int m2cnt[] = { 31, 16 };
+	static const int m2lcnt[] = { 63, 48 };
 
 	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
 				AR5K_PHY_WEAK_OFDM_LOW_THR_M1, m1l[on]);
@@ -192,7 +192,7 @@ ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on)
 void
 ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on)
 {
-	const int val[] = { 8, 6 };
+	static const int val[] = { 8, 6 };
 	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_CCK_CROSSCORR,
 				AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR, val[on]);
 	ah->ah_sc->ani_state.cck_weak_sig = on;
@@ -216,7 +216,7 @@ static void
 ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as,
 			 bool ofdm_trigger)
 {
-	int rssi = ah->ah_beacon_rssi_avg.avg;
+	int rssi = ewma_read(&ah->ah_beacon_rssi_avg);
 
 	ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "raise immunity (%s)",
 		ofdm_trigger ? "ODFM" : "CCK");
@@ -301,7 +301,7 @@ ath5k_ani_raise_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as,
 static void
 ath5k_ani_lower_immunity(struct ath5k_hw *ah, struct ath5k_ani_state *as)
 {
-	int rssi = ah->ah_beacon_rssi_avg.avg;
+	int rssi = ewma_read(&ah->ah_beacon_rssi_avg);
 
 	ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_ANI, "lower immunity");
 
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 308b79e1ff0..407e39c2b10 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -25,6 +25,7 @@
 
 #include <linux/io.h>
 #include <linux/types.h>
+#include <linux/average.h>
 #include <net/mac80211.h>
 
 /* RX/TX descriptor hw structs
@@ -153,19 +154,6 @@
 		udelay(1);						\
 } while (0)
 
-/* Register dumps are done per operation mode */
-#define AR5K_INI_RFGAIN_5GHZ		0
-#define AR5K_INI_RFGAIN_2GHZ		1
-
-/* TODO: Clean this up */
-#define AR5K_INI_VAL_11A		0
-#define AR5K_INI_VAL_11A_TURBO		1
-#define AR5K_INI_VAL_11B		2
-#define AR5K_INI_VAL_11G		3
-#define AR5K_INI_VAL_11G_TURBO		4
-#define AR5K_INI_VAL_XR			0
-#define AR5K_INI_VAL_MAX		5
-
 /*
  * Some tuneable values (these should be changeable by the user)
  * TODO: Make use of them and add more options OR use debug/configfs
@@ -221,42 +209,66 @@
 
 /* Initial values */
 #define	AR5K_INIT_CYCRSSI_THR1			2
-#define AR5K_INIT_TX_LATENCY			502
-#define AR5K_INIT_USEC				39
-#define AR5K_INIT_USEC_TURBO			79
-#define AR5K_INIT_USEC_32			31
-#define AR5K_INIT_SLOT_TIME			396
-#define AR5K_INIT_SLOT_TIME_TURBO		480
-#define AR5K_INIT_ACK_CTS_TIMEOUT		1024
-#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO		0x08000800
-#define AR5K_INIT_PROG_IFS			920
-#define AR5K_INIT_PROG_IFS_TURBO		960
-#define AR5K_INIT_EIFS				3440
-#define AR5K_INIT_EIFS_TURBO			6880
-#define AR5K_INIT_SIFS				560
-#define AR5K_INIT_SIFS_TURBO			480
+
+/* Tx retry limits */
 #define AR5K_INIT_SH_RETRY			10
 #define AR5K_INIT_LG_RETRY			AR5K_INIT_SH_RETRY
+/* For station mode */
 #define AR5K_INIT_SSH_RETRY			32
 #define AR5K_INIT_SLG_RETRY			AR5K_INIT_SSH_RETRY
 #define AR5K_INIT_TX_RETRY			10
 
-#define AR5K_INIT_TRANSMIT_LATENCY		(			\
-	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
-	(AR5K_INIT_USEC)						\
-)
-#define AR5K_INIT_TRANSMIT_LATENCY_TURBO	(			\
-	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
-	(AR5K_INIT_USEC_TURBO)						\
-)
-#define AR5K_INIT_PROTO_TIME_CNTRL		(			\
-	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) |	\
-	(AR5K_INIT_PROG_IFS)						\
-)
-#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO	(			\
-	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
-	(AR5K_INIT_PROG_IFS_TURBO)					\
-)
+
+/* Slot time */
+#define AR5K_INIT_SLOT_TIME_TURBO		6
+#define AR5K_INIT_SLOT_TIME_DEFAULT		9
+#define	AR5K_INIT_SLOT_TIME_HALF_RATE		13
+#define	AR5K_INIT_SLOT_TIME_QUARTER_RATE	21
+#define	AR5K_INIT_SLOT_TIME_B			20
+#define AR5K_SLOT_TIME_MAX			0xffff
+
+/* SIFS */
+#define	AR5K_INIT_SIFS_TURBO			6
+/* XXX: 8 from initvals 10 from standard */
+#define	AR5K_INIT_SIFS_DEFAULT_BG		8
+#define	AR5K_INIT_SIFS_DEFAULT_A		16
+#define	AR5K_INIT_SIFS_HALF_RATE		32
+#define AR5K_INIT_SIFS_QUARTER_RATE		64
+
+/* Used to calculate tx time for non 5/10/40MHz
+ * operation */
+/* It's preamble time + signal time (16 + 4) */
+#define	AR5K_INIT_OFDM_PREAMPLE_TIME		20
+/* Preamble time for 40MHz (turbo) operation (min ?) */
+#define	AR5K_INIT_OFDM_PREAMBLE_TIME_MIN	14
+#define	AR5K_INIT_OFDM_SYMBOL_TIME		4
+#define	AR5K_INIT_OFDM_PLCP_BITS		22
+
+/* Rx latency for 5 and 10MHz operation (max ?) */
+#define AR5K_INIT_RX_LAT_MAX			63
+/* Tx latencies from initvals (5212 only but no problem
+ * because we only tweak them on 5212) */
+#define	AR5K_INIT_TX_LAT_A			54
+#define	AR5K_INIT_TX_LAT_BG			384
+/* Tx latency for 40MHz (turbo) operation (min ?) */
+#define	AR5K_INIT_TX_LAT_MIN			32
+/* Default Tx/Rx latencies (same for 5211)*/
+#define AR5K_INIT_TX_LATENCY_5210		54
+#define	AR5K_INIT_RX_LATENCY_5210		29
+
+/* Tx frame to Tx data start delay */
+#define AR5K_INIT_TXF2TXD_START_DEFAULT		14
+#define AR5K_INIT_TXF2TXD_START_DELAY_10MHZ	12
+#define AR5K_INIT_TXF2TXD_START_DELAY_5MHZ	13
+
+/* We need to increase PHY switch and agc settling time
+ * on turbo mode */
+#define	AR5K_SWITCH_SETTLING			5760
+#define	AR5K_SWITCH_SETTLING_TURBO		7168
+
+#define	AR5K_AGC_SETTLING			28
+/* 38 on 5210 but shouldn't matter */
+#define	AR5K_AGC_SETTLING_TURBO			37
 
 
 /* GENERIC CHIPSET DEFINITIONS */
@@ -303,12 +315,19 @@ struct ath5k_srev_name {
 #define AR5K_SREV_AR5311B	0x30 /* Spirit */
 #define AR5K_SREV_AR5211	0x40 /* Oahu */
 #define AR5K_SREV_AR5212	0x50 /* Venice */
+#define AR5K_SREV_AR5312_R2	0x52 /* AP31 */
 #define AR5K_SREV_AR5212_V4	0x54 /* ??? */
 #define AR5K_SREV_AR5213	0x55 /* ??? */
+#define AR5K_SREV_AR5312_R7	0x57 /* AP30 */
+#define AR5K_SREV_AR2313_R8	0x58 /* AP43 */
 #define AR5K_SREV_AR5213A	0x59 /* Hainan */
 #define AR5K_SREV_AR2413	0x78 /* Griffin lite */
 #define AR5K_SREV_AR2414	0x70 /* Griffin */
+#define AR5K_SREV_AR2315_R6 0x86 /* AP51-Light */
+#define AR5K_SREV_AR2315_R7 0x87 /* AP51-Full */
 #define AR5K_SREV_AR5424	0x90 /* Condor */
+#define AR5K_SREV_AR2317_R1 0x90 /* AP61-Light */
+#define AR5K_SREV_AR2317_R2 0x91 /* AP61-Full */
 #define AR5K_SREV_AR5413	0xa4 /* Eagle lite */
 #define AR5K_SREV_AR5414	0xa0 /* Eagle */
 #define AR5K_SREV_AR2415	0xb0 /* Talon */
@@ -404,12 +423,10 @@ struct ath5k_srev_name {
 
 enum ath5k_driver_mode {
 	AR5K_MODE_11A		=	0,
-	AR5K_MODE_11A_TURBO	=	1,
-	AR5K_MODE_11B		=	2,
-	AR5K_MODE_11G		=	3,
-	AR5K_MODE_11G_TURBO	=	4,
+	AR5K_MODE_11B		=	1,
+	AR5K_MODE_11G		=	2,
 	AR5K_MODE_XR		=	0,
-	AR5K_MODE_MAX		=	5
+	AR5K_MODE_MAX		=	3
 };
 
 enum ath5k_ant_mode {
@@ -423,6 +440,12 @@ enum ath5k_ant_mode {
 	AR5K_ANTMODE_MAX,
 };
 
+enum ath5k_bw_mode {
+	AR5K_BWMODE_DEFAULT	= 0,	/* 20MHz, default operation */
+	AR5K_BWMODE_5MHZ	= 1,	/* Quarter rate */
+	AR5K_BWMODE_10MHZ	= 2,	/* Half rate */
+	AR5K_BWMODE_40MHZ	= 3	/* Turbo */
+};
 
 /****************\
   TX DEFINITIONS
@@ -655,7 +678,6 @@ struct ath5k_gain {
 
 /* channel_flags */
 #define	CHANNEL_CW_INT	0x0008	/* Contention Window interference detected */
-#define	CHANNEL_TURBO	0x0010	/* Turbo Channel */
 #define	CHANNEL_CCK	0x0020	/* CCK channel */
 #define	CHANNEL_OFDM	0x0040	/* OFDM channel */
 #define	CHANNEL_2GHZ	0x0080	/* 2GHz channel. */
@@ -667,16 +689,10 @@ struct ath5k_gain {
 #define	CHANNEL_A	(CHANNEL_5GHZ|CHANNEL_OFDM)
 #define	CHANNEL_B	(CHANNEL_2GHZ|CHANNEL_CCK)
 #define	CHANNEL_G	(CHANNEL_2GHZ|CHANNEL_OFDM)
-#define	CHANNEL_T	(CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
-#define	CHANNEL_TG	(CHANNEL_2GHZ|CHANNEL_OFDM|CHANNEL_TURBO)
-#define	CHANNEL_108A	CHANNEL_T
-#define	CHANNEL_108G	CHANNEL_TG
 #define	CHANNEL_X	(CHANNEL_5GHZ|CHANNEL_OFDM|CHANNEL_XR)
 
-#define	CHANNEL_ALL 	(CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ| \
-		CHANNEL_TURBO)
+#define	CHANNEL_ALL	(CHANNEL_OFDM|CHANNEL_CCK|CHANNEL_2GHZ|CHANNEL_5GHZ)
 
-#define	CHANNEL_ALL_NOTURBO 	(CHANNEL_ALL & ~CHANNEL_TURBO)
 #define CHANNEL_MODES		CHANNEL_ALL
 
 /*
@@ -1025,7 +1041,6 @@ struct ath5k_hw {
 	enum ath5k_int		ah_imr;
 
 	struct ieee80211_channel *ah_current_channel;
-	bool			ah_turbo;
 	bool			ah_calibration;
 	bool			ah_single_chip;
 
@@ -1034,6 +1049,7 @@ struct ath5k_hw {
 	u32			ah_phy;
 	u32			ah_mac_srev;
 	u16			ah_mac_version;
+	u16			ah_mac_revision;
 	u16			ah_phy_revision;
 	u16			ah_radio_5ghz_revision;
 	u16			ah_radio_2ghz_revision;
@@ -1043,6 +1059,8 @@ struct ath5k_hw {
 
 	u32			ah_limit_tx_retries;
 	u8			ah_coverage_class;
+	bool			ah_ack_bitrate_high;
+	u8			ah_bwmode;
 
 	/* Antenna Control */
 	u32			ah_ant_ctl[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
@@ -1085,12 +1103,14 @@ struct ath5k_hw {
 		/* Values in 0.25dB units */
 		s16		txp_min_pwr;
 		s16		txp_max_pwr;
+		s16		txp_cur_pwr;
 		/* Values in 0.5dB units */
 		s16		txp_offset;
 		s16		txp_ofdm;
 		s16		txp_cck_ofdm_gainf_delta;
 		/* Value in dB units */
 		s16		txp_cck_ofdm_pwr_delta;
+		bool		txp_setup;
 	} ah_txpower;
 
 	struct {
@@ -1102,7 +1122,7 @@ struct ath5k_hw {
 	struct ath5k_nfcal_hist ah_nfcal_hist;
 
 	/* average beacon RSSI in our BSS (used by ANI) */
-	struct ath5k_avg_val	ah_beacon_rssi_avg;
+	struct ewma		ah_beacon_rssi_avg;
 
 	/* noise floor from last periodic calibration */
 	s32			ah_noise_floor;
@@ -1131,36 +1151,50 @@ struct ath5k_hw {
 /*
  * Prototypes
  */
+extern const struct ieee80211_ops ath5k_hw_ops;
 
-/* Attach/Detach Functions */
-int ath5k_hw_attach(struct ath5k_softc *sc);
-void ath5k_hw_detach(struct ath5k_hw *ah);
+/* Initialization and detach functions */
+int ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops);
+void ath5k_deinit_softc(struct ath5k_softc *sc);
+int ath5k_hw_init(struct ath5k_softc *sc);
+void ath5k_hw_deinit(struct ath5k_hw *ah);
 
 int ath5k_sysfs_register(struct ath5k_softc *sc);
 void ath5k_sysfs_unregister(struct ath5k_softc *sc);
 
+/*Chip id helper functions */
+const char *ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val);
+int ath5k_hw_read_srev(struct ath5k_hw *ah);
+
 /* LED functions */
 int ath5k_init_leds(struct ath5k_softc *sc);
 void ath5k_led_enable(struct ath5k_softc *sc);
 void ath5k_led_off(struct ath5k_softc *sc);
 void ath5k_unregister_leds(struct ath5k_softc *sc);
 
+
 /* Reset Functions */
 int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
 int ath5k_hw_on_hold(struct ath5k_hw *ah);
 int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
-		   struct ieee80211_channel *channel, bool change_channel);
+	   struct ieee80211_channel *channel, bool fast, bool skip_pcu);
 int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
 			      bool is_set);
 /* Power management functions */
 
+
+/* Clock rate related functions */
+unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec);
+unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock);
+void ath5k_hw_set_clockrate(struct ath5k_hw *ah);
+
+
 /* DMA Related Functions */
 void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
-int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
 u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
-void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
+int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
 int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
-int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
+int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue);
 u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
 int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
 				u32 phys_addr);
@@ -1170,38 +1204,43 @@ bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
 int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
 enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask);
 void ath5k_hw_update_mib_counters(struct ath5k_hw *ah);
+/* Init/Stop functions */
+void ath5k_hw_dma_init(struct ath5k_hw *ah);
+int ath5k_hw_dma_stop(struct ath5k_hw *ah);
 
 /* EEPROM access functions */
 int ath5k_eeprom_init(struct ath5k_hw *ah);
 void ath5k_eeprom_detach(struct ath5k_hw *ah);
 int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
 
+
 /* Protocol Control Unit Functions */
+/* Helpers */
+int ath5k_hw_get_frame_duration(struct ath5k_hw *ah,
+		int len, struct ieee80211_rate *rate);
+unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah);
+unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah);
 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype opmode);
 void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class);
-/* BSSID Functions */
+/* RX filter control*/
 int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
 void ath5k_hw_set_bssid(struct ath5k_hw *ah);
 void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
-/* Receive start/stop functions */
-void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
-void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
-/* RX Filter functions */
 void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
 u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
 void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
+/* Receive (DRU) start/stop functions */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
+void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
 /* Beacon control functions */
 u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
 void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64);
 void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
 void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval);
 bool ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval);
-/* ACK bit rate */
-void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high);
-/* Clock rate related functions */
-unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec);
-unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock);
-void ath5k_hw_set_clockrate(struct ath5k_hw *ah);
+/* Init function */
+void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+								u8 mode);
 
 /* Queue Control Unit, DFS Control Unit Functions */
 int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
@@ -1214,7 +1253,9 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
 u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
 void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
 int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
-int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
+int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time);
+/* Init function */
+int ath5k_hw_init_queues(struct ath5k_hw *ah);
 
 /* Hardware Descriptor Functions */
 int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
@@ -1224,6 +1265,7 @@ int ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 	unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
 	u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3);
 
+
 /* GPIO Functions */
 void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
 int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
@@ -1233,11 +1275,13 @@ int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
 void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
 			    u32 interrupt_level);
 
-/* rfkill Functions */
+
+/* RFkill Functions */
 void ath5k_rfkill_hw_start(struct ath5k_hw *ah);
 void ath5k_rfkill_hw_stop(struct ath5k_hw *ah);
 
-/* Misc functions */
+
+/* Misc functions TODO: Cleanup */
 int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
 int ath5k_hw_get_capability(struct ath5k_hw *ah,
 			    enum ath5k_capability_type cap_type, u32 capability,
@@ -1245,19 +1289,20 @@ int ath5k_hw_get_capability(struct ath5k_hw *ah,
 int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
 int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
 
+
 /* Initial register settings functions */
 int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
 
-/* Initialize RF */
-int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
-			 struct ieee80211_channel *channel,
-			 unsigned int mode);
-int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq);
+
+/* PHY functions */
+/* Misc PHY functions */
+u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
+int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+/* Gain_F optimization */
 enum ath5k_rfgain ath5k_hw_gainf_calibrate(struct ath5k_hw *ah);
 int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah);
 /* PHY/RF channel functions */
 bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
-int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 /* PHY calibration */
 void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah);
 int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
@@ -1266,18 +1311,14 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah);
 /* Spur mitigation */
 bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
 				  struct ieee80211_channel *channel);
-void ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
-					 struct ieee80211_channel *channel);
-/* Misc PHY functions */
-u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
-int ath5k_hw_phy_disable(struct ath5k_hw *ah);
 /* Antenna control */
 void ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode);
 void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode);
 /* TX power setup */
-int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
-		     u8 ee_mode, u8 txpower);
 int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
+/* Init function */
+int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+				u8 mode, bool fast);
 
 /*
  * Functions used internaly
@@ -1293,6 +1334,32 @@ static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
         return &(ath5k_hw_common(ah)->regulatory);
 }
 
+#ifdef CONFIG_ATHEROS_AR231X
+#define AR5K_AR2315_PCI_BASE	((void __iomem *)0xb0100000)
+
+static inline void __iomem *ath5k_ahb_reg(struct ath5k_hw *ah, u16 reg)
+{
+	/* On AR2315 and AR2317 the PCI clock domain registers
+	 * are outside of the WMAC register space */
+	if (unlikely((reg >= 0x4000) && (reg < 0x5000) &&
+		(ah->ah_mac_srev >= AR5K_SREV_AR2315_R6)))
+		return AR5K_AR2315_PCI_BASE + reg;
+
+	return ah->ah_iobase + reg;
+}
+
+static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
+{
+	return __raw_readl(ath5k_ahb_reg(ah, reg));
+}
+
+static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
+{
+	__raw_writel(val, ath5k_ahb_reg(ah, reg));
+}
+
+#else
+
 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
 {
 	return ioread32(ah->ah_iobase + reg);
@@ -1303,6 +1370,24 @@ static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
 	iowrite32(val, ah->ah_iobase + reg);
 }
 
+#endif
+
+static inline enum ath_bus_type ath5k_get_bus_type(struct ath5k_hw *ah)
+{
+	return ath5k_hw_common(ah)->bus_ops->ath_bus_type;
+}
+
+static inline void ath5k_read_cachesize(struct ath_common *common, int *csz)
+{
+	common->bus_ops->read_cachesize(common, csz);
+}
+
+static inline bool ath5k_hw_nvram_read(struct ath5k_hw *ah, u32 off, u16 *data)
+{
+	struct ath_common *common = ath5k_hw_common(ah);
+	return common->bus_ops->eeprom_read(common, off, data);
+}
+
 static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
 {
 	u32 retval = 0, bit, i;
@@ -1315,27 +1400,4 @@ static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
 	return retval;
 }
 
-#define AVG_SAMPLES	8
-#define AVG_FACTOR	1000
-
-/**
- * ath5k_moving_average -  Exponentially weighted moving average
- * @avg: average structure
- * @val: current value
- *
- * This implementation make use of a struct ath5k_avg_val to prevent rounding
- * errors.
- */
-static inline struct ath5k_avg_val
-ath5k_moving_average(const struct ath5k_avg_val avg, const int val)
-{
-	struct ath5k_avg_val new;
-	new.avg_weight = avg.avg_weight  ?
-		(((avg.avg_weight * ((AVG_SAMPLES) - 1)) +
-			(val * (AVG_FACTOR))) / (AVG_SAMPLES)) :
-		(val * (AVG_FACTOR));
-	new.avg = new.avg_weight / (AVG_FACTOR);
-	return new;
-}
-
 #endif
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index fbe8aca975d..cdac5cff017 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -93,16 +93,16 @@ static int ath5k_hw_post(struct ath5k_hw *ah)
 }
 
 /**
- * ath5k_hw_attach - Check if hw is supported and init the needed structs
+ * ath5k_hw_init - Check if hw is supported and init the needed structs
  *
- * @sc: The &struct ath5k_softc we got from the driver's attach function
+ * @sc: The &struct ath5k_softc we got from the driver's init_softc function
  *
  * Check if the device is supported, perform a POST and initialize the needed
  * structs. Returns -ENOMEM if we don't have memory for the needed structs,
  * -ENODEV if the device is not supported or prints an error msg if something
  * else went wrong.
  */
-int ath5k_hw_attach(struct ath5k_softc *sc)
+int ath5k_hw_init(struct ath5k_softc *sc)
 {
 	struct ath5k_hw *ah = sc->ah;
 	struct ath_common *common = ath5k_hw_common(ah);
@@ -115,7 +115,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
 	 * HW information
 	 */
 	ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT;
-	ah->ah_turbo = false;
+	ah->ah_bwmode = AR5K_BWMODE_DEFAULT;
 	ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
 	ah->ah_imr = 0;
 	ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
@@ -128,7 +128,8 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
 	/*
 	 * Find the mac version
 	 */
-	srev = ath5k_hw_reg_read(ah, AR5K_SREV);
+	ath5k_hw_read_srev(ah);
+	srev = ah->ah_mac_srev;
 	if (srev < AR5K_SREV_AR5311)
 		ah->ah_version = AR5K_AR5210;
 	else if (srev < AR5K_SREV_AR5212)
@@ -136,6 +137,10 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
 	else
 		ah->ah_version = AR5K_AR5212;
 
+	/* Get the MAC revision */
+	ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
+	ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
+
 	/* Fill the ath5k_hw struct with the needed functions */
 	ret = ath5k_hw_init_desc_functions(ah);
 	if (ret)
@@ -146,9 +151,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
 	if (ret)
 		goto err;
 
-	/* Get MAC, PHY and RADIO revisions */
-	ah->ah_mac_srev = srev;
-	ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
+	/* Get PHY and RADIO revisions */
 	ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) &
 			0xffffffff;
 	ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
@@ -273,7 +276,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
 	/*
 	 * Write PCI-E power save settings
 	 */
-	if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
+	if ((ah->ah_version == AR5K_AR5212) && pdev && (pci_is_pcie(pdev))) {
 		ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
 		ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
 
@@ -305,8 +308,7 @@ int ath5k_hw_attach(struct ath5k_softc *sc)
 	/* Get misc capabilities */
 	ret = ath5k_hw_set_capabilities(ah);
 	if (ret) {
-		ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
-			sc->pdev->device);
+		ATH5K_ERR(sc, "unable to get device capabilities\n");
 		goto err;
 	}
 
@@ -346,11 +348,11 @@ err:
 }
 
 /**
- * ath5k_hw_detach - Free the ath5k_hw struct
+ * ath5k_hw_deinit - Free the ath5k_hw struct
  *
  * @ah: The &struct ath5k_hw
  */
-void ath5k_hw_detach(struct ath5k_hw *ah)
+void ath5k_hw_deinit(struct ath5k_hw *ah)
 {
 	__set_bit(ATH_STAT_INVALID, ah->ah_sc->status);
 
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 8251946842e..019a74d533a 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -47,8 +47,6 @@
 #include <linux/io.h>
 #include <linux/netdevice.h>
 #include <linux/cache.h>
-#include <linux/pci.h>
-#include <linux/pci-aspm.h>
 #include <linux/ethtool.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
@@ -62,10 +60,9 @@
 #include "reg.h"
 #include "debug.h"
 #include "ani.h"
-#include "../debug.h"
 
-static int modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+int ath5k_modparam_nohwcrypt;
+module_param_named(nohwcrypt, ath5k_modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
 static int modparam_all_channels;
@@ -78,39 +75,24 @@ MODULE_AUTHOR("Nick Kossifidis");
 MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
 MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
-
-static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
-static int ath5k_beacon_update(struct ieee80211_hw *hw,
-		struct ieee80211_vif *vif);
-static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
-
-/* Known PCI ids */
-static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
-	{ PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
-	{ PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
-	{ PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
-	{ PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
-	{ PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
-	{ PCI_VDEVICE(3COM_2,  0x0013) }, /* 3com 5212 */
-	{ PCI_VDEVICE(3COM,    0x0013) }, /* 3com 3CRDAG675 5212 */
-	{ PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
-	{ PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */
-	{ PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */
-	{ PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */
-	{ PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */
-	{ PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */
-	{ PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */
-	{ PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
-	{ PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
-	{ PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
-	{ PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
-	{ 0 }
-};
-MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
+
+static int ath5k_init(struct ieee80211_hw *hw);
+static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
+								bool skip_pcu);
+int ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
 
 /* Known SREVs */
 static const struct ath5k_srev_name srev_names[] = {
+#ifdef CONFIG_ATHEROS_AR231X
+	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R2 },
+	{ "5312",	AR5K_VERSION_MAC,	AR5K_SREV_AR5312_R7 },
+	{ "2313",	AR5K_VERSION_MAC,	AR5K_SREV_AR2313_R8 },
+	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R6 },
+	{ "2315",	AR5K_VERSION_MAC,	AR5K_SREV_AR2315_R7 },
+	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R1 },
+	{ "2317",	AR5K_VERSION_MAC,	AR5K_SREV_AR2317_R2 },
+#else
 	{ "5210",	AR5K_VERSION_MAC,	AR5K_SREV_AR5210 },
 	{ "5311",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311 },
 	{ "5311A",	AR5K_VERSION_MAC,	AR5K_SREV_AR5311A },
@@ -129,6 +111,7 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "5418",	AR5K_VERSION_MAC,	AR5K_SREV_AR5418 },
 	{ "2425",	AR5K_VERSION_MAC,	AR5K_SREV_AR2425 },
 	{ "2417",	AR5K_VERSION_MAC,	AR5K_SREV_AR2417 },
+#endif
 	{ "xxxxx",	AR5K_VERSION_MAC,	AR5K_SREV_UNKNOWN },
 	{ "5110",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5110 },
 	{ "5111",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5111 },
@@ -142,10 +125,12 @@ static const struct ath5k_srev_name srev_names[] = {
 	{ "2112B",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2112B },
 	{ "2413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2413 },
 	{ "5413",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5413 },
-	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
-	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
 	{ "5424",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5424 },
 	{ "5133",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_5133 },
+#ifdef CONFIG_ATHEROS_AR231X
+	{ "2316",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2316 },
+	{ "2317",	AR5K_VERSION_RAD,	AR5K_SREV_RAD_2317 },
+#endif
 	{ "xxxxx",	AR5K_VERSION_RAD,	AR5K_SREV_UNKNOWN },
 };
 
@@ -191,38 +176,6 @@ static const struct ieee80211_rate ath5k_rates[] = {
 	/* XR missing */
 };
 
-static inline void ath5k_txbuf_free_skb(struct ath5k_softc *sc,
-				struct ath5k_buf *bf)
-{
-	BUG_ON(!bf);
-	if (!bf->skb)
-		return;
-	pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
-			PCI_DMA_TODEVICE);
-	dev_kfree_skb_any(bf->skb);
-	bf->skb = NULL;
-	bf->skbaddr = 0;
-	bf->desc->ds_data = 0;
-}
-
-static inline void ath5k_rxbuf_free_skb(struct ath5k_softc *sc,
-				struct ath5k_buf *bf)
-{
-	struct ath5k_hw *ah = sc->ah;
-	struct ath_common *common = ath5k_hw_common(ah);
-
-	BUG_ON(!bf);
-	if (!bf->skb)
-		return;
-	pci_unmap_single(sc->pdev, bf->skbaddr, common->rx_bufsize,
-			PCI_DMA_FROMDEVICE);
-	dev_kfree_skb_any(bf->skb);
-	bf->skb = NULL;
-	bf->skbaddr = 0;
-	bf->desc->ds_data = 0;
-}
-
-
 static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
 {
 	u64 tsf = ath5k_hw_get_tsf64(ah);
@@ -233,7 +186,7 @@ static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
 	return (tsf & ~0x7fff) | rstamp;
 }
 
-static const char *
+const char *
 ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
 {
 	const char *name = "xxxxx";
@@ -327,14 +280,12 @@ ath5k_copy_channels(struct ath5k_hw *ah,
 
 	switch (mode) {
 	case AR5K_MODE_11A:
-	case AR5K_MODE_11A_TURBO:
 		/* 1..220, but 2GHz frequencies are filtered by check_channel */
 		size = 220 ;
 		chfreq = CHANNEL_5GHZ;
 		break;
 	case AR5K_MODE_11B:
 	case AR5K_MODE_11G:
-	case AR5K_MODE_11G_TURBO:
 		size = 26;
 		chfreq = CHANNEL_2GHZ;
 		break;
@@ -363,11 +314,6 @@ ath5k_copy_channels(struct ath5k_hw *ah,
 		case AR5K_MODE_11G:
 			channels[count].hw_value = chfreq | CHANNEL_OFDM;
 			break;
-		case AR5K_MODE_11A_TURBO:
-		case AR5K_MODE_11G_TURBO:
-			channels[count].hw_value = chfreq |
-				CHANNEL_OFDM | CHANNEL_TURBO;
-			break;
 		case AR5K_MODE_11B:
 			channels[count].hw_value = CHANNEL_B;
 		}
@@ -483,7 +429,7 @@ ath5k_setup_bands(struct ieee80211_hw *hw)
  *
  * Called with sc->lock.
  */
-static int
+int
 ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 {
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
@@ -496,7 +442,7 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 	 * hardware at the new frequency, and then re-enable
 	 * the relevant bits of the h/w.
 	 */
-	return ath5k_reset(sc, chan);
+	return ath5k_reset(sc, chan, true);
 }
 
 static void
@@ -549,7 +495,7 @@ static void ath_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 	/* Calculate combined mode - when APs are active, operate in AP mode.
 	 * Otherwise use the mode of the new interface. This can currently
 	 * only deal with combinations of APs and STAs. Only one ad-hoc
-	 * interfaces is allowed above.
+	 * interfaces is allowed.
 	 */
 	if (avf->opmode == NL80211_IFTYPE_AP)
 		iter_data->opmode = NL80211_IFTYPE_AP;
@@ -558,16 +504,9 @@ static void ath_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 			iter_data->opmode = avf->opmode;
 }
 
-static void ath_do_set_opmode(struct ath5k_softc *sc)
-{
-	struct ath5k_hw *ah = sc->ah;
-	ath5k_hw_set_opmode(ah, sc->opmode);
-	ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n",
-		  sc->opmode, ath_opmode_to_string(sc->opmode));
-}
-
-void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc,
-					struct ieee80211_vif *vif)
+void
+ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc,
+				   struct ieee80211_vif *vif)
 {
 	struct ath_common *common = ath5k_hw_common(sc->ah);
 	struct ath_vif_iter_data iter_data;
@@ -595,7 +534,9 @@ void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc,
 		/* Nothing active, default to station mode */
 		sc->opmode = NL80211_IFTYPE_STATION;
 
-	ath_do_set_opmode(sc);
+	ath5k_hw_set_opmode(sc->ah, sc->opmode);
+	ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d (%s)\n",
+		  sc->opmode, ath_opmode_to_string(sc->opmode));
 
 	if (iter_data.need_set_hw_addr && iter_data.found_active)
 		ath5k_hw_set_lladdr(sc->ah, iter_data.active_mac);
@@ -604,7 +545,7 @@ void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc,
 		ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
 }
 
-static void
+void
 ath5k_mode_setup(struct ath5k_softc *sc, struct ieee80211_vif *vif)
 {
 	struct ath5k_hw *ah = sc->ah;
@@ -659,10 +600,11 @@ struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
 		return NULL;
 	}
 
-	*skb_addr = pci_map_single(sc->pdev,
+	*skb_addr = dma_map_single(sc->dev,
 				   skb->data, common->rx_bufsize,
-				   PCI_DMA_FROMDEVICE);
-	if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
+				   DMA_FROM_DEVICE);
+
+	if (unlikely(dma_mapping_error(sc->dev, *skb_addr))) {
 		ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
 		dev_kfree_skb(skb);
 		return NULL;
@@ -758,8 +700,8 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
 	flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
 
 	/* XXX endianness */
-	bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
-			PCI_DMA_TODEVICE);
+	bf->skbaddr = dma_map_single(sc->dev, skb->data, skb->len,
+			DMA_TO_DEVICE);
 
 	rate = ieee80211_get_tx_rate(sc->hw, info);
 	if (!rate) {
@@ -839,7 +781,7 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
 
 	return 0;
 err_unmap:
-	pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
+	dma_unmap_single(sc->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
 	return ret;
 }
 
@@ -848,7 +790,7 @@ err_unmap:
 \*******************/
 
 static int
-ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
+ath5k_desc_alloc(struct ath5k_softc *sc)
 {
 	struct ath5k_desc *ds;
 	struct ath5k_buf *bf;
@@ -859,7 +801,9 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
 	/* allocate descriptors */
 	sc->desc_len = sizeof(struct ath5k_desc) *
 			(ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
-	sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
+
+	sc->desc = dma_alloc_coherent(sc->dev, sc->desc_len,
+				&sc->desc_daddr, GFP_KERNEL);
 	if (sc->desc == NULL) {
 		ATH5K_ERR(sc, "can't allocate descriptors\n");
 		ret = -ENOMEM;
@@ -905,14 +849,45 @@ ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
 
 	return 0;
 err_free:
-	pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
+	dma_free_coherent(sc->dev, sc->desc_len, sc->desc, sc->desc_daddr);
 err:
 	sc->desc = NULL;
 	return ret;
 }
 
+void
+ath5k_txbuf_free_skb(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+	BUG_ON(!bf);
+	if (!bf->skb)
+		return;
+	dma_unmap_single(sc->dev, bf->skbaddr, bf->skb->len,
+			DMA_TO_DEVICE);
+	dev_kfree_skb_any(bf->skb);
+	bf->skb = NULL;
+	bf->skbaddr = 0;
+	bf->desc->ds_data = 0;
+}
+
+void
+ath5k_rxbuf_free_skb(struct ath5k_softc *sc, struct ath5k_buf *bf)
+{
+	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
+
+	BUG_ON(!bf);
+	if (!bf->skb)
+		return;
+	dma_unmap_single(sc->dev, bf->skbaddr, common->rx_bufsize,
+			DMA_FROM_DEVICE);
+	dev_kfree_skb_any(bf->skb);
+	bf->skb = NULL;
+	bf->skbaddr = 0;
+	bf->desc->ds_data = 0;
+}
+
 static void
-ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
+ath5k_desc_free(struct ath5k_softc *sc)
 {
 	struct ath5k_buf *bf;
 
@@ -924,7 +899,7 @@ ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
 		ath5k_txbuf_free_skb(sc, bf);
 
 	/* Free memory associated with all descriptors */
-	pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
+	dma_free_coherent(sc->dev, sc->desc_len, sc->desc, sc->desc_daddr);
 	sc->desc = NULL;
 	sc->desc_daddr = 0;
 
@@ -1069,62 +1044,44 @@ err:
 	return ret;
 }
 
+/**
+ * ath5k_drain_tx_buffs - Empty tx buffers
+ *
+ * @sc The &struct ath5k_softc
+ *
+ * Empty tx buffers from all queues in preparation
+ * of a reset or during shutdown.
+ *
+ * NB:	this assumes output has been stopped and
+ *	we do not need to block ath5k_tx_tasklet
+ */
 static void
-ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
+ath5k_drain_tx_buffs(struct ath5k_softc *sc)
 {
+	struct ath5k_txq *txq;
 	struct ath5k_buf *bf, *bf0;
+	int i;
 
-	/*
-	 * NB: this assumes output has been stopped and
-	 *     we do not need to block ath5k_tx_tasklet
-	 */
-	spin_lock_bh(&txq->lock);
-	list_for_each_entry_safe(bf, bf0, &txq->q, list) {
-		ath5k_debug_printtxbuf(sc, bf);
-
-		ath5k_txbuf_free_skb(sc, bf);
+	for (i = 0; i < ARRAY_SIZE(sc->txqs); i++) {
+		if (sc->txqs[i].setup) {
+			txq = &sc->txqs[i];
+			spin_lock_bh(&txq->lock);
+			list_for_each_entry_safe(bf, bf0, &txq->q, list) {
+				ath5k_debug_printtxbuf(sc, bf);
 
-		spin_lock_bh(&sc->txbuflock);
-		list_move_tail(&bf->list, &sc->txbuf);
-		sc->txbuf_len++;
-		txq->txq_len--;
-		spin_unlock_bh(&sc->txbuflock);
-	}
-	txq->link = NULL;
-	txq->txq_poll_mark = false;
-	spin_unlock_bh(&txq->lock);
-}
+				ath5k_txbuf_free_skb(sc, bf);
 
-/*
- * Drain the transmit queues and reclaim resources.
- */
-static void
-ath5k_txq_cleanup(struct ath5k_softc *sc)
-{
-	struct ath5k_hw *ah = sc->ah;
-	unsigned int i;
-
-	/* XXX return value */
-	if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
-		/* don't touch the hardware if marked invalid */
-		ath5k_hw_stop_tx_dma(ah, sc->bhalq);
-		ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
-			ath5k_hw_get_txdp(ah, sc->bhalq));
-		for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
-			if (sc->txqs[i].setup) {
-				ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
-				ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
-					"link %p\n",
-					sc->txqs[i].qnum,
-					ath5k_hw_get_txdp(ah,
-							sc->txqs[i].qnum),
-					sc->txqs[i].link);
+				spin_lock_bh(&sc->txbuflock);
+				list_move_tail(&bf->list, &sc->txbuf);
+				sc->txbuf_len++;
+				txq->txq_len--;
+				spin_unlock_bh(&sc->txbuflock);
 			}
+			txq->link = NULL;
+			txq->txq_poll_mark = false;
+			spin_unlock_bh(&txq->lock);
+		}
 	}
-
-	for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
-		if (sc->txqs[i].setup)
-			ath5k_txq_drainq(sc, &sc->txqs[i]);
 }
 
 static void
@@ -1184,16 +1141,19 @@ err:
 }
 
 /*
- * Disable the receive h/w in preparation for a reset.
+ * Disable the receive logic on PCU (DRU)
+ * In preparation for a shutdown.
+ *
+ * Note: Doesn't stop rx DMA, ath5k_hw_dma_stop
+ * does.
  */
 static void
 ath5k_rx_stop(struct ath5k_softc *sc)
 {
 	struct ath5k_hw *ah = sc->ah;
 
-	ath5k_hw_stop_rx_pcu(ah);	/* disable PCU */
 	ath5k_hw_set_rx_filter(ah, 0);	/* clear recv filter */
-	ath5k_hw_stop_rx_dma(ah);	/* disable DMA engine */
+	ath5k_hw_stop_rx_pcu(ah);	/* disable PCU */
 
 	ath5k_debug_printrxbuffs(sc, ah);
 }
@@ -1307,8 +1267,7 @@ ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi)
 	    memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) != 0)
 		return;
 
-	ah->ah_beacon_rssi_avg = ath5k_moving_average(ah->ah_beacon_rssi_avg,
-						      rssi);
+	ewma_add(&ah->ah_beacon_rssi_avg, rssi);
 
 	/* in IBSS mode we should keep RSSI statistics per neighbour */
 	/* le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS */
@@ -1551,9 +1510,9 @@ ath5k_tasklet_rx(unsigned long data)
 			if (!next_skb)
 				goto next;
 
-			pci_unmap_single(sc->pdev, bf->skbaddr,
+			dma_unmap_single(sc->dev, bf->skbaddr,
 					 common->rx_bufsize,
-					 PCI_DMA_FROMDEVICE);
+					 DMA_FROM_DEVICE);
 
 			skb_put(skb, rs.rs_datalen);
 
@@ -1574,8 +1533,9 @@ unlock:
 * TX Handling *
 \*************/
 
-static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
-			  struct ath5k_txq *txq)
+int
+ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
+	       struct ath5k_txq *txq)
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_buf *bf;
@@ -1716,8 +1676,9 @@ ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
 
 			skb = bf->skb;
 			bf->skb = NULL;
-			pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
-					PCI_DMA_TODEVICE);
+
+			dma_unmap_single(sc->dev, bf->skbaddr, skb->len,
+					DMA_TO_DEVICE);
 			ath5k_tx_frame_completed(sc, skb, &ts);
 		}
 
@@ -1771,12 +1732,13 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	u32 flags;
 	const int padsize = 0;
 
-	bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
-			PCI_DMA_TODEVICE);
+	bf->skbaddr = dma_map_single(sc->dev, skb->data, skb->len,
+			DMA_TO_DEVICE);
 	ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
 			"skbaddr %llx\n", skb, skb->data, skb->len,
 			(unsigned long long)bf->skbaddr);
-	if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
+
+	if (dma_mapping_error(sc->dev, bf->skbaddr)) {
 		ATH5K_ERR(sc, "beacon DMA mapping failed\n");
 		return -EIO;
 	}
@@ -1828,7 +1790,7 @@ ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 
 	return 0;
 err_unmap:
-	pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
+	dma_unmap_single(sc->dev, bf->skbaddr, skb->len, DMA_TO_DEVICE);
 	return ret;
 }
 
@@ -1839,7 +1801,7 @@ err_unmap:
  *
  * Called with the beacon lock.
  */
-static int
+int
 ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 {
 	int ret;
@@ -1917,7 +1879,8 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 		sc->bmisscount = 0;
 	}
 
-	if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) {
+	if ((sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) ||
+			sc->opmode == NL80211_IFTYPE_MESH_POINT) {
 		u64 tsf = ath5k_hw_get_tsf64(ah);
 		u32 tsftu = TSF_TO_TU(tsf);
 		int slot = ((tsftu % sc->bintval) * ATH_BCBUF) / sc->bintval;
@@ -1944,13 +1907,14 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 	 * This should never fail since we check above that no frames
 	 * are still pending on the queue.
 	 */
-	if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
+	if (unlikely(ath5k_hw_stop_beacon_queue(ah, sc->bhalq))) {
 		ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq);
 		/* NB: hw still stops DMA, so proceed */
 	}
 
-	/* refresh the beacon for AP mode */
-	if (sc->opmode == NL80211_IFTYPE_AP)
+	/* refresh the beacon for AP or MESH mode */
+	if (sc->opmode == NL80211_IFTYPE_AP ||
+			sc->opmode == NL80211_IFTYPE_MESH_POINT)
 		ath5k_beacon_update(sc->hw, vif);
 
 	ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
@@ -1983,7 +1947,7 @@ ath5k_beacon_send(struct ath5k_softc *sc)
  * when we otherwise know we have to update the timers, but we keep it in this
  * function to have it all together in one place.
  */
-static void
+void
 ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
 {
 	struct ath5k_hw *ah = sc->ah;
@@ -2085,7 +2049,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
  * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
  * interrupts to detect TSF updates only.
  */
-static void
+void
 ath5k_beacon_config(struct ath5k_softc *sc)
 {
 	struct ath5k_hw *ah = sc->ah;
@@ -2113,7 +2077,7 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 		} else
 			ath5k_beacon_update_timers(sc, -1);
 	} else {
-		ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
+		ath5k_hw_stop_beacon_queue(sc->ah, sc->bhalq);
 	}
 
 	ath5k_hw_set_imr(ah, sc->imask);
@@ -2175,7 +2139,7 @@ ath5k_intr_calibration_poll(struct ath5k_hw *ah)
 	 * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
 }
 
-static irqreturn_t
+irqreturn_t
 ath5k_intr(int irq, void *dev_id)
 {
 	struct ath5k_softc *sc = dev_id;
@@ -2184,7 +2148,8 @@ ath5k_intr(int irq, void *dev_id)
 	unsigned int counter = 1000;
 
 	if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
-				!ath5k_hw_is_intr_pending(ah)))
+		((ath5k_get_bus_type(ah) != ATH_AHB) &&
+				!ath5k_hw_is_intr_pending(ah))))
 		return IRQ_NONE;
 
 	do {
@@ -2250,6 +2215,10 @@ ath5k_intr(int irq, void *dev_id)
 				tasklet_schedule(&sc->rf_kill.toggleq);
 
 		}
+
+		if (ath5k_get_bus_type(ah) == ATH_AHB)
+			break;
+
 	} while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
 
 	if (unlikely(!counter))
@@ -2349,7 +2318,7 @@ ath5k_tx_complete_poll_work(struct work_struct *work)
 	if (needreset) {
 		ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
 			  "TX queues stuck, resetting\n");
-		ath5k_reset(sc, sc->curchan);
+		ath5k_reset(sc, NULL, true);
 	}
 
 	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
@@ -2361,6 +2330,163 @@ ath5k_tx_complete_poll_work(struct work_struct *work)
 * Initialization routines *
 \*************************/
 
+int
+ath5k_init_softc(struct ath5k_softc *sc, const struct ath_bus_ops *bus_ops)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ath_common *common;
+	int ret;
+	int csz;
+
+	/* Initialize driver private data */
+	SET_IEEE80211_DEV(hw, sc->dev);
+	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
+			IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+			IEEE80211_HW_SIGNAL_DBM |
+			IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC) |
+		BIT(NL80211_IFTYPE_MESH_POINT);
+
+	/* both antennas can be configured as RX or TX */
+	hw->wiphy->available_antennas_tx = 0x3;
+	hw->wiphy->available_antennas_rx = 0x3;
+
+	hw->extra_tx_headroom = 2;
+	hw->channel_change_time = 5000;
+
+	/*
+	 * Mark the device as detached to avoid processing
+	 * interrupts until setup is complete.
+	 */
+	__set_bit(ATH_STAT_INVALID, sc->status);
+
+	sc->opmode = NL80211_IFTYPE_STATION;
+	sc->bintval = 1000;
+	mutex_init(&sc->lock);
+	spin_lock_init(&sc->rxbuflock);
+	spin_lock_init(&sc->txbuflock);
+	spin_lock_init(&sc->block);
+
+
+	/* Setup interrupt handler */
+	ret = request_irq(sc->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
+	if (ret) {
+		ATH5K_ERR(sc, "request_irq failed\n");
+		goto err;
+	}
+
+	/* If we passed the test, malloc an ath5k_hw struct */
+	sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
+	if (!sc->ah) {
+		ret = -ENOMEM;
+		ATH5K_ERR(sc, "out of memory\n");
+		goto err_irq;
+	}
+
+	sc->ah->ah_sc = sc;
+	sc->ah->ah_iobase = sc->iobase;
+	common = ath5k_hw_common(sc->ah);
+	common->ops = &ath5k_common_ops;
+	common->bus_ops = bus_ops;
+	common->ah = sc->ah;
+	common->hw = hw;
+	common->priv = sc;
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	ath5k_read_cachesize(common, &csz);
+	common->cachelsz = csz << 2; /* convert to bytes */
+
+	spin_lock_init(&common->cc_lock);
+
+	/* Initialize device */
+	ret = ath5k_hw_init(sc);
+	if (ret)
+		goto err_free_ah;
+
+	/* set up multi-rate retry capabilities */
+	if (sc->ah->ah_version == AR5K_AR5212) {
+		hw->max_rates = 4;
+		hw->max_rate_tries = 11;
+	}
+
+	hw->vif_data_size = sizeof(struct ath5k_vif);
+
+	/* Finish private driver data initialization */
+	ret = ath5k_init(hw);
+	if (ret)
+		goto err_ah;
+
+	ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
+			ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
+					sc->ah->ah_mac_srev,
+					sc->ah->ah_phy_revision);
+
+	if (!sc->ah->ah_single_chip) {
+		/* Single chip radio (!RF5111) */
+		if (sc->ah->ah_radio_5ghz_revision &&
+			!sc->ah->ah_radio_2ghz_revision) {
+			/* No 5GHz support -> report 2GHz radio */
+			if (!test_bit(AR5K_MODE_11A,
+				sc->ah->ah_capabilities.cap_mode)) {
+				ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
+					ath5k_chip_name(AR5K_VERSION_RAD,
+						sc->ah->ah_radio_5ghz_revision),
+						sc->ah->ah_radio_5ghz_revision);
+			/* No 2GHz support (5110 and some
+			 * 5Ghz only cards) -> report 5Ghz radio */
+			} else if (!test_bit(AR5K_MODE_11B,
+				sc->ah->ah_capabilities.cap_mode)) {
+				ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
+					ath5k_chip_name(AR5K_VERSION_RAD,
+						sc->ah->ah_radio_5ghz_revision),
+						sc->ah->ah_radio_5ghz_revision);
+			/* Multiband radio */
+			} else {
+				ATH5K_INFO(sc, "RF%s multiband radio found"
+					" (0x%x)\n",
+					ath5k_chip_name(AR5K_VERSION_RAD,
+						sc->ah->ah_radio_5ghz_revision),
+						sc->ah->ah_radio_5ghz_revision);
+			}
+		}
+		/* Multi chip radio (RF5111 - RF2111) ->
+		 * report both 2GHz/5GHz radios */
+		else if (sc->ah->ah_radio_5ghz_revision &&
+				sc->ah->ah_radio_2ghz_revision){
+			ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
+				ath5k_chip_name(AR5K_VERSION_RAD,
+					sc->ah->ah_radio_5ghz_revision),
+					sc->ah->ah_radio_5ghz_revision);
+			ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
+				ath5k_chip_name(AR5K_VERSION_RAD,
+					sc->ah->ah_radio_2ghz_revision),
+					sc->ah->ah_radio_2ghz_revision);
+		}
+	}
+
+	ath5k_debug_init_device(sc);
+
+	/* ready to process interrupts */
+	__clear_bit(ATH_STAT_INVALID, sc->status);
+
+	return 0;
+err_ah:
+	ath5k_hw_deinit(sc->ah);
+err_free_ah:
+	kfree(sc->ah);
+err_irq:
+	free_irq(sc->irq, sc);
+err:
+	return ret;
+}
+
 static int
 ath5k_stop_locked(struct ath5k_softc *sc)
 {
@@ -2389,19 +2515,18 @@ ath5k_stop_locked(struct ath5k_softc *sc)
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
 		ath5k_led_off(sc);
 		ath5k_hw_set_imr(ah, 0);
-		synchronize_irq(sc->pdev->irq);
-	}
-	ath5k_txq_cleanup(sc);
-	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
+		synchronize_irq(sc->irq);
 		ath5k_rx_stop(sc);
+		ath5k_hw_dma_stop(ah);
+		ath5k_drain_tx_buffs(sc);
 		ath5k_hw_phy_disable(ah);
 	}
 
 	return 0;
 }
 
-static int
-ath5k_init(struct ath5k_softc *sc)
+int
+ath5k_init_hw(struct ath5k_softc *sc)
 {
 	struct ath5k_hw *ah = sc->ah;
 	struct ath_common *common = ath5k_hw_common(ah);
@@ -2430,7 +2555,7 @@ ath5k_init(struct ath5k_softc *sc)
 		AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
 		AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
 
-	ret = ath5k_reset(sc, NULL);
+	ret = ath5k_reset(sc, NULL, false);
 	if (ret)
 		goto done;
 
@@ -2443,7 +2568,9 @@ ath5k_init(struct ath5k_softc *sc)
 	for (i = 0; i < common->keymax; i++)
 		ath_hw_keyreset(common, (u16) i);
 
-	ath5k_hw_set_ack_bitrate_high(ah, true);
+	/* Use higher rates for acks instead of base
+	 * rate */
+	ah->ah_ack_bitrate_high = true;
 
 	for (i = 0; i < ARRAY_SIZE(sc->bslot); i++)
 		sc->bslot[i] = NULL;
@@ -2474,7 +2601,7 @@ static void stop_tasklets(struct ath5k_softc *sc)
  * if another thread does a system call and the thread doing the
  * stop is preempted).
  */
-static int
+int
 ath5k_stop_hw(struct ath5k_softc *sc)
 {
 	int ret;
@@ -2527,25 +2654,35 @@ ath5k_stop_hw(struct ath5k_softc *sc)
  * This should be called with sc->lock.
  */
 static int
-ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
+ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
+							bool skip_pcu)
 {
 	struct ath5k_hw *ah = sc->ah;
-	int ret;
+	struct ath_common *common = ath5k_hw_common(ah);
+	int ret, ani_mode;
 
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
 
 	ath5k_hw_set_imr(ah, 0);
-	synchronize_irq(sc->pdev->irq);
+	synchronize_irq(sc->irq);
 	stop_tasklets(sc);
 
-	if (chan) {
-		ath5k_txq_cleanup(sc);
-		ath5k_rx_stop(sc);
+	/* Save ani mode and disable ANI durring
+	 * reset. If we don't we might get false
+	 * PHY error interrupts. */
+	ani_mode = ah->ah_sc->ani_state.ani_mode;
+	ath5k_ani_init(ah, ATH5K_ANI_MODE_OFF);
 
+	/* We are going to empty hw queues
+	 * so we should also free any remaining
+	 * tx buffers */
+	ath5k_drain_tx_buffs(sc);
+	if (chan) {
 		sc->curchan = chan;
 		sc->curband = &sc->sbands[chan->band];
 	}
-	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL);
+	ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL,
+								skip_pcu);
 	if (ret) {
 		ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
 		goto err;
@@ -2557,11 +2694,20 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
 		goto err;
 	}
 
-	ath5k_ani_init(ah, ah->ah_sc->ani_state.ani_mode);
+	ath5k_ani_init(ah, ani_mode);
 
 	ah->ah_cal_next_full = jiffies;
 	ah->ah_cal_next_ani = jiffies;
 	ah->ah_cal_next_nf = jiffies;
+	ewma_init(&ah->ah_beacon_rssi_avg, 1024, 8);
+
+	/* clear survey data and cycle counters */
+	memset(&sc->survey, 0, sizeof(sc->survey));
+	spin_lock_bh(&common->cc_lock);
+	ath_hw_cycle_counters_update(common);
+	memset(&common->cc_survey, 0, sizeof(common->cc_survey));
+	memset(&common->cc_ani, 0, sizeof(common->cc_ani));
+	spin_unlock_bh(&common->cc_lock);
 
 	/*
 	 * Change channels and update the h/w rate map if we're switching;
@@ -2590,13 +2736,14 @@ static void ath5k_reset_work(struct work_struct *work)
 		reset_work);
 
 	mutex_lock(&sc->lock);
-	ath5k_reset(sc, sc->curchan);
+	ath5k_reset(sc, NULL, true);
 	mutex_unlock(&sc->lock);
 }
 
 static int
-ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
+ath5k_init(struct ieee80211_hw *hw)
 {
+
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_hw *ah = sc->ah;
 	struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
@@ -2604,7 +2751,6 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	u8 mac[ETH_ALEN] = {};
 	int ret;
 
-	ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
 
 	/*
 	 * Check if the MAC has multi-rate retry support.
@@ -2641,7 +2787,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	/*
 	 * Allocate tx+rx descriptors and populate the lists.
 	 */
-	ret = ath5k_desc_alloc(sc, pdev);
+	ret = ath5k_desc_alloc(sc);
 	if (ret) {
 		ATH5K_ERR(sc, "can't allocate descriptors\n");
 		goto err;
@@ -2666,33 +2812,46 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 		goto err_bhal;
 	}
 
-	/* This order matches mac80211's queue priority, so we can
-	 * directly use the mac80211 queue number without any mapping */
-	txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO);
-	if (IS_ERR(txq)) {
-		ATH5K_ERR(sc, "can't setup xmit queue\n");
-		ret = PTR_ERR(txq);
-		goto err_queues;
-	}
-	txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI);
-	if (IS_ERR(txq)) {
-		ATH5K_ERR(sc, "can't setup xmit queue\n");
-		ret = PTR_ERR(txq);
-		goto err_queues;
-	}
-	txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
-	if (IS_ERR(txq)) {
-		ATH5K_ERR(sc, "can't setup xmit queue\n");
-		ret = PTR_ERR(txq);
-		goto err_queues;
-	}
-	txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
-	if (IS_ERR(txq)) {
-		ATH5K_ERR(sc, "can't setup xmit queue\n");
-		ret = PTR_ERR(txq);
-		goto err_queues;
+	/* 5211 and 5212 usually support 10 queues but we better rely on the
+	 * capability information */
+	if (ah->ah_capabilities.cap_queues.q_tx_num >= 6) {
+		/* This order matches mac80211's queue priority, so we can
+		* directly use the mac80211 queue number without any mapping */
+		txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VO);
+		if (IS_ERR(txq)) {
+			ATH5K_ERR(sc, "can't setup xmit queue\n");
+			ret = PTR_ERR(txq);
+			goto err_queues;
+		}
+		txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_VI);
+		if (IS_ERR(txq)) {
+			ATH5K_ERR(sc, "can't setup xmit queue\n");
+			ret = PTR_ERR(txq);
+			goto err_queues;
+		}
+		txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
+		if (IS_ERR(txq)) {
+			ATH5K_ERR(sc, "can't setup xmit queue\n");
+			ret = PTR_ERR(txq);
+			goto err_queues;
+		}
+		txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
+		if (IS_ERR(txq)) {
+			ATH5K_ERR(sc, "can't setup xmit queue\n");
+			ret = PTR_ERR(txq);
+			goto err_queues;
+		}
+		hw->queues = 4;
+	} else {
+		/* older hardware (5210) can only support one data queue */
+		txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BE);
+		if (IS_ERR(txq)) {
+			ATH5K_ERR(sc, "can't setup xmit queue\n");
+			ret = PTR_ERR(txq);
+			goto err_queues;
+		}
+		hw->queues = 1;
 	}
-	hw->queues = 4;
 
 	tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
 	tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
@@ -2705,8 +2864,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 
 	ret = ath5k_eeprom_read_mac(ah, mac);
 	if (ret) {
-		ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
-			sc->pdev->device);
+		ATH5K_ERR(sc, "unable to read address from EEPROM\n");
 		goto err_queues;
 	}
 
@@ -2741,15 +2899,15 @@ err_queues:
 err_bhal:
 	ath5k_hw_release_tx_queue(ah, sc->bhalq);
 err_desc:
-	ath5k_desc_free(sc, pdev);
+	ath5k_desc_free(sc);
 err:
 	return ret;
 }
 
-static void
-ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
+void
+ath5k_deinit_softc(struct ath5k_softc *sc)
 {
-	struct ath5k_softc *sc = hw->priv;
+	struct ieee80211_hw *hw = sc->hw;
 
 	/*
 	 * NB: the order of these is important:
@@ -2764,8 +2922,9 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	 * XXX: ??? detach ath5k_hw ???
 	 * Other than that, it's straightforward...
 	 */
+	ath5k_debug_finish_device(sc);
 	ieee80211_unregister_hw(hw);
-	ath5k_desc_free(sc, pdev);
+	ath5k_desc_free(sc);
 	ath5k_txq_release(sc);
 	ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
 	ath5k_unregister_leds(sc);
@@ -2776,231 +2935,12 @@ ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	 * returns because we'll get called back to reclaim node
 	 * state and potentially want to use them.
 	 */
+	ath5k_hw_deinit(sc->ah);
+	free_irq(sc->irq, sc);
 }
 
-/********************\
-* Mac80211 functions *
-\********************/
-
-static int
-ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct ath5k_softc *sc = hw->priv;
-	u16 qnum = skb_get_queue_mapping(skb);
-
-	if (WARN_ON(qnum >= sc->ah->ah_capabilities.cap_queues.q_tx_num)) {
-		dev_kfree_skb_any(skb);
-		return 0;
-	}
-
-	return ath5k_tx_queue(hw, skb, &sc->txqs[qnum]);
-}
-
-static int ath5k_start(struct ieee80211_hw *hw)
-{
-	return ath5k_init(hw->priv);
-}
-
-static void ath5k_stop(struct ieee80211_hw *hw)
-{
-	ath5k_stop_hw(hw->priv);
-}
-
-static int ath5k_add_interface(struct ieee80211_hw *hw,
-		struct ieee80211_vif *vif)
-{
-	struct ath5k_softc *sc = hw->priv;
-	int ret;
-	struct ath5k_vif *avf = (void *)vif->drv_priv;
-
-	mutex_lock(&sc->lock);
-
-	if ((vif->type == NL80211_IFTYPE_AP ||
-	     vif->type == NL80211_IFTYPE_ADHOC)
-	    && (sc->num_ap_vifs + sc->num_adhoc_vifs) >= ATH_BCBUF) {
-		ret = -ELNRNG;
-		goto end;
-	}
-
-	/* Don't allow other interfaces if one ad-hoc is configured.
-	 * TODO: Fix the problems with ad-hoc and multiple other interfaces.
-	 * We would need to operate the HW in ad-hoc mode to allow TSF updates
-	 * for the IBSS, but this breaks with additional AP or STA interfaces
-	 * at the moment. */
-	if (sc->num_adhoc_vifs ||
-	    (sc->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) {
-		ATH5K_ERR(sc, "Only one single ad-hoc interface is allowed.\n");
-		ret = -ELNRNG;
-		goto end;
-	}
-
-	switch (vif->type) {
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_ADHOC:
-	case NL80211_IFTYPE_MESH_POINT:
-		avf->opmode = vif->type;
-		break;
-	default:
-		ret = -EOPNOTSUPP;
-		goto end;
-	}
-
-	sc->nvifs++;
-	ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode);
-
-	/* Assign the vap/adhoc to a beacon xmit slot. */
-	if ((avf->opmode == NL80211_IFTYPE_AP) ||
-	    (avf->opmode == NL80211_IFTYPE_ADHOC)) {
-		int slot;
-
-		WARN_ON(list_empty(&sc->bcbuf));
-		avf->bbuf = list_first_entry(&sc->bcbuf, struct ath5k_buf,
-					     list);
-		list_del(&avf->bbuf->list);
-
-		avf->bslot = 0;
-		for (slot = 0; slot < ATH_BCBUF; slot++) {
-			if (!sc->bslot[slot]) {
-				avf->bslot = slot;
-				break;
-			}
-		}
-		BUG_ON(sc->bslot[avf->bslot] != NULL);
-		sc->bslot[avf->bslot] = vif;
-		if (avf->opmode == NL80211_IFTYPE_AP)
-			sc->num_ap_vifs++;
-		else
-			sc->num_adhoc_vifs++;
-	}
-
-	/* Any MAC address is fine, all others are included through the
-	 * filter.
-	 */
-	memcpy(&sc->lladdr, vif->addr, ETH_ALEN);
-	ath5k_hw_set_lladdr(sc->ah, vif->addr);
-
-	memcpy(&avf->lladdr, vif->addr, ETH_ALEN);
-
-	ath5k_mode_setup(sc, vif);
-
-	ret = 0;
-end:
-	mutex_unlock(&sc->lock);
-	return ret;
-}
-
-static void
-ath5k_remove_interface(struct ieee80211_hw *hw,
-			struct ieee80211_vif *vif)
-{
-	struct ath5k_softc *sc = hw->priv;
-	struct ath5k_vif *avf = (void *)vif->drv_priv;
-	unsigned int i;
-
-	mutex_lock(&sc->lock);
-	sc->nvifs--;
-
-	if (avf->bbuf) {
-		ath5k_txbuf_free_skb(sc, avf->bbuf);
-		list_add_tail(&avf->bbuf->list, &sc->bcbuf);
-		for (i = 0; i < ATH_BCBUF; i++) {
-			if (sc->bslot[i] == vif) {
-				sc->bslot[i] = NULL;
-				break;
-			}
-		}
-		avf->bbuf = NULL;
-	}
-	if (avf->opmode == NL80211_IFTYPE_AP)
-		sc->num_ap_vifs--;
-	else if (avf->opmode == NL80211_IFTYPE_ADHOC)
-		sc->num_adhoc_vifs--;
-
-	ath5k_update_bssid_mask_and_opmode(sc, NULL);
-	mutex_unlock(&sc->lock);
-}
-
-/*
- * TODO: Phy disable/diversity etc
- */
-static int
-ath5k_config(struct ieee80211_hw *hw, u32 changed)
-{
-	struct ath5k_softc *sc = hw->priv;
-	struct ath5k_hw *ah = sc->ah;
-	struct ieee80211_conf *conf = &hw->conf;
-	int ret = 0;
-
-	mutex_lock(&sc->lock);
-
-	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		ret = ath5k_chan_set(sc, conf->channel);
-		if (ret < 0)
-			goto unlock;
-	}
-
-	if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
-	(sc->power_level != conf->power_level)) {
-		sc->power_level = conf->power_level;
-
-		/* Half dB steps */
-		ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
-	}
-
-	/* TODO:
-	 * 1) Move this on config_interface and handle each case
-	 * separately eg. when we have only one STA vif, use
-	 * AR5K_ANTMODE_SINGLE_AP
-	 *
-	 * 2) Allow the user to change antenna mode eg. when only
-	 * one antenna is present
-	 *
-	 * 3) Allow the user to set default/tx antenna when possible
-	 *
-	 * 4) Default mode should handle 90% of the cases, together
-	 * with fixed a/b and single AP modes we should be able to
-	 * handle 99%. Sectored modes are extreme cases and i still
-	 * haven't found a usage for them. If we decide to support them,
-	 * then we must allow the user to set how many tx antennas we
-	 * have available
-	 */
-	ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
-
-unlock:
-	mutex_unlock(&sc->lock);
-	return ret;
-}
-
-static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
-				   struct netdev_hw_addr_list *mc_list)
-{
-	u32 mfilt[2], val;
-	u8 pos;
-	struct netdev_hw_addr *ha;
-
-	mfilt[0] = 0;
-	mfilt[1] = 1;
-
-	netdev_hw_addr_list_for_each(ha, mc_list) {
-		/* calculate XOR of eight 6-bit values */
-		val = get_unaligned_le32(ha->addr + 0);
-		pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
-		val = get_unaligned_le32(ha->addr + 3);
-		pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
-		pos &= 0x3f;
-		mfilt[pos / 32] |= (1 << (pos % 32));
-		/* XXX: we might be able to just do this instead,
-		* but not sure, needs testing, if we do use this we'd
-		* neet to inform below to not reset the mcast */
-		/* ath5k_hw_set_mcast_filterindex(ah,
-		 *      ha->addr[5]); */
-	}
-
-	return ((u64)(mfilt[1]) << 32) | mfilt[0];
-}
-
-static bool ath_any_vif_assoc(struct ath5k_softc *sc)
+bool
+ath_any_vif_assoc(struct ath5k_softc *sc)
 {
 	struct ath_vif_iter_data iter_data;
 	iter_data.hw_macaddr = NULL;
@@ -3013,242 +2953,7 @@ static bool ath_any_vif_assoc(struct ath5k_softc *sc)
 	return iter_data.any_assoc;
 }
 
-#define SUPPORTED_FIF_FLAGS \
-	FIF_PROMISC_IN_BSS |  FIF_ALLMULTI | FIF_FCSFAIL | \
-	FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
-	FIF_BCN_PRBRESP_PROMISC
-/*
- * o always accept unicast, broadcast, and multicast traffic
- * o multicast traffic for all BSSIDs will be enabled if mac80211
- *   says it should be
- * o maintain current state of phy ofdm or phy cck error reception.
- *   If the hardware detects any of these type of errors then
- *   ath5k_hw_get_rx_filter() will pass to us the respective
- *   hardware filters to be able to receive these type of frames.
- * o probe request frames are accepted only when operating in
- *   hostap, adhoc, or monitor modes
- * o enable promiscuous mode according to the interface state
- * o accept beacons:
- *   - when operating in adhoc mode so the 802.11 layer creates
- *     node table entries for peers,
- *   - when operating in station mode for collecting rssi data when
- *     the station is otherwise quiet, or
- *   - when scanning
- */
-static void ath5k_configure_filter(struct ieee80211_hw *hw,
-		unsigned int changed_flags,
-		unsigned int *new_flags,
-		u64 multicast)
-{
-	struct ath5k_softc *sc = hw->priv;
-	struct ath5k_hw *ah = sc->ah;
-	u32 mfilt[2], rfilt;
-
-	mutex_lock(&sc->lock);
-
-	mfilt[0] = multicast;
-	mfilt[1] = multicast >> 32;
-
-	/* Only deal with supported flags */
-	changed_flags &= SUPPORTED_FIF_FLAGS;
-	*new_flags &= SUPPORTED_FIF_FLAGS;
-
-	/* If HW detects any phy or radar errors, leave those filters on.
-	 * Also, always enable Unicast, Broadcasts and Multicast
-	 * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
-	rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
-		(AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
-		AR5K_RX_FILTER_MCAST);
-
-	if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
-		if (*new_flags & FIF_PROMISC_IN_BSS) {
-			__set_bit(ATH_STAT_PROMISC, sc->status);
-		} else {
-			__clear_bit(ATH_STAT_PROMISC, sc->status);
-		}
-	}
-
-	if (test_bit(ATH_STAT_PROMISC, sc->status))
-		rfilt |= AR5K_RX_FILTER_PROM;
-
-	/* Note, AR5K_RX_FILTER_MCAST is already enabled */
-	if (*new_flags & FIF_ALLMULTI) {
-		mfilt[0] =  ~0;
-		mfilt[1] =  ~0;
-	}
-
-	/* This is the best we can do */
-	if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
-		rfilt |= AR5K_RX_FILTER_PHYERR;
-
-	/* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
-	* and probes for any BSSID */
-	if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (sc->nvifs > 1))
-		rfilt |= AR5K_RX_FILTER_BEACON;
-
-	/* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
-	 * set we should only pass on control frames for this
-	 * station. This needs testing. I believe right now this
-	 * enables *all* control frames, which is OK.. but
-	 * but we should see if we can improve on granularity */
-	if (*new_flags & FIF_CONTROL)
-		rfilt |= AR5K_RX_FILTER_CONTROL;
-
-	/* Additional settings per mode -- this is per ath5k */
-
-	/* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
-
-	switch (sc->opmode) {
-	case NL80211_IFTYPE_MESH_POINT:
-		rfilt |= AR5K_RX_FILTER_CONTROL |
-			 AR5K_RX_FILTER_BEACON |
-			 AR5K_RX_FILTER_PROBEREQ |
-			 AR5K_RX_FILTER_PROM;
-		break;
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_ADHOC:
-		rfilt |= AR5K_RX_FILTER_PROBEREQ |
-			 AR5K_RX_FILTER_BEACON;
-		break;
-	case NL80211_IFTYPE_STATION:
-		if (sc->assoc)
-			rfilt |= AR5K_RX_FILTER_BEACON;
-	default:
-		break;
-	}
-
-	/* Set filters */
-	ath5k_hw_set_rx_filter(ah, rfilt);
-
-	/* Set multicast bits */
-	ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
-	/* Set the cached hw filter flags, this will later actually
-	 * be set in HW */
-	sc->filter_flags = rfilt;
-
-	mutex_unlock(&sc->lock);
-}
-
-static int
-ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
-	      struct ieee80211_vif *vif, struct ieee80211_sta *sta,
-	      struct ieee80211_key_conf *key)
-{
-	struct ath5k_softc *sc = hw->priv;
-	struct ath5k_hw *ah = sc->ah;
-	struct ath_common *common = ath5k_hw_common(ah);
-	int ret = 0;
-
-	if (modparam_nohwcrypt)
-		return -EOPNOTSUPP;
-
-	switch (key->cipher) {
-	case WLAN_CIPHER_SUITE_WEP40:
-	case WLAN_CIPHER_SUITE_WEP104:
-	case WLAN_CIPHER_SUITE_TKIP:
-		break;
-	case WLAN_CIPHER_SUITE_CCMP:
-		if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM)
-			break;
-		return -EOPNOTSUPP;
-	default:
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	mutex_lock(&sc->lock);
-
-	switch (cmd) {
-	case SET_KEY:
-		ret = ath_key_config(common, vif, sta, key);
-		if (ret >= 0) {
-			key->hw_key_idx = ret;
-			/* push IV and Michael MIC generation to stack */
-			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
-			if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
-				key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
-			if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
-				key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
-			ret = 0;
-		}
-		break;
-	case DISABLE_KEY:
-		ath_key_delete(common, key);
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	mmiowb();
-	mutex_unlock(&sc->lock);
-	return ret;
-}
-
-static int
-ath5k_get_stats(struct ieee80211_hw *hw,
-		struct ieee80211_low_level_stats *stats)
-{
-	struct ath5k_softc *sc = hw->priv;
-
-	/* Force update */
-	ath5k_hw_update_mib_counters(sc->ah);
-
-	stats->dot11ACKFailureCount = sc->stats.ack_fail;
-	stats->dot11RTSFailureCount = sc->stats.rts_fail;
-	stats->dot11RTSSuccessCount = sc->stats.rts_ok;
-	stats->dot11FCSErrorCount = sc->stats.fcs_error;
-
-	return 0;
-}
-
-static int ath5k_get_survey(struct ieee80211_hw *hw, int idx,
-		struct survey_info *survey)
-{
-	struct ath5k_softc *sc = hw->priv;
-	struct ieee80211_conf *conf = &hw->conf;
-
-	 if (idx != 0)
-		return -ENOENT;
-
-	survey->channel = conf->channel;
-	survey->filled = SURVEY_INFO_NOISE_DBM;
-	survey->noise = sc->ah->ah_noise_floor;
-
-	return 0;
-}
-
-static u64
-ath5k_get_tsf(struct ieee80211_hw *hw)
-{
-	struct ath5k_softc *sc = hw->priv;
-
-	return ath5k_hw_get_tsf64(sc->ah);
-}
-
-static void
-ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
-{
-	struct ath5k_softc *sc = hw->priv;
-
-	ath5k_hw_set_tsf64(sc->ah, tsf);
-}
-
-static void
-ath5k_reset_tsf(struct ieee80211_hw *hw)
-{
-	struct ath5k_softc *sc = hw->priv;
-
-	/*
-	 * in IBSS mode we need to update the beacon timers too.
-	 * this will also reset the TSF if we call it with 0
-	 */
-	if (sc->opmode == NL80211_IFTYPE_ADHOC)
-		ath5k_beacon_update_timers(sc, 0);
-	else
-		ath5k_hw_reset_tsf(sc->ah);
-}
-
-static void
+void
 set_beacon_filter(struct ieee80211_hw *hw, bool enable)
 {
 	struct ath5k_softc *sc = hw->priv;
@@ -3262,494 +2967,3 @@ set_beacon_filter(struct ieee80211_hw *hw, bool enable)
 	ath5k_hw_set_rx_filter(ah, rfilt);
 	sc->filter_flags = rfilt;
 }
-
-static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
-				    struct ieee80211_vif *vif,
-				    struct ieee80211_bss_conf *bss_conf,
-				    u32 changes)
-{
-	struct ath5k_vif *avf = (void *)vif->drv_priv;
-	struct ath5k_softc *sc = hw->priv;
-	struct ath5k_hw *ah = sc->ah;
-	struct ath_common *common = ath5k_hw_common(ah);
-	unsigned long flags;
-
-	mutex_lock(&sc->lock);
-
-	if (changes & BSS_CHANGED_BSSID) {
-		/* Cache for later use during resets */
-		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
-		common->curaid = 0;
-		ath5k_hw_set_bssid(ah);
-		mmiowb();
-	}
-
-	if (changes & BSS_CHANGED_BEACON_INT)
-		sc->bintval = bss_conf->beacon_int;
-
-	if (changes & BSS_CHANGED_ASSOC) {
-		avf->assoc = bss_conf->assoc;
-		if (bss_conf->assoc)
-			sc->assoc = bss_conf->assoc;
-		else
-			sc->assoc = ath_any_vif_assoc(sc);
-
-		if (sc->opmode == NL80211_IFTYPE_STATION)
-			set_beacon_filter(hw, sc->assoc);
-		ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
-			AR5K_LED_ASSOC : AR5K_LED_INIT);
-		if (bss_conf->assoc) {
-			ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
-				  "Bss Info ASSOC %d, bssid: %pM\n",
-				  bss_conf->aid, common->curbssid);
-			common->curaid = bss_conf->aid;
-			ath5k_hw_set_bssid(ah);
-			/* Once ANI is available you would start it here */
-		}
-	}
-
-	if (changes & BSS_CHANGED_BEACON) {
-		spin_lock_irqsave(&sc->block, flags);
-		ath5k_beacon_update(hw, vif);
-		spin_unlock_irqrestore(&sc->block, flags);
-	}
-
-	if (changes & BSS_CHANGED_BEACON_ENABLED)
-		sc->enable_beacon = bss_conf->enable_beacon;
-
-	if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED |
-		       BSS_CHANGED_BEACON_INT))
-		ath5k_beacon_config(sc);
-
-	mutex_unlock(&sc->lock);
-}
-
-static void ath5k_sw_scan_start(struct ieee80211_hw *hw)
-{
-	struct ath5k_softc *sc = hw->priv;
-	if (!sc->assoc)
-		ath5k_hw_set_ledstate(sc->ah, AR5K_LED_SCAN);
-}
-
-static void ath5k_sw_scan_complete(struct ieee80211_hw *hw)
-{
-	struct ath5k_softc *sc = hw->priv;
-	ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
-		AR5K_LED_ASSOC : AR5K_LED_INIT);
-}
-
-/**
- * ath5k_set_coverage_class - Set IEEE 802.11 coverage class
- *
- * @hw: struct ieee80211_hw pointer
- * @coverage_class: IEEE 802.11 coverage class number
- *
- * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given
- * coverage class. The values are persistent, they are restored after device
- * reset.
- */
-static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
-{
-	struct ath5k_softc *sc = hw->priv;
-
-	mutex_lock(&sc->lock);
-	ath5k_hw_set_coverage_class(sc->ah, coverage_class);
-	mutex_unlock(&sc->lock);
-}
-
-static int ath5k_conf_tx(struct ieee80211_hw *hw, u16 queue,
-			 const struct ieee80211_tx_queue_params *params)
-{
-	struct ath5k_softc *sc = hw->priv;
-	struct ath5k_hw *ah = sc->ah;
-	struct ath5k_txq_info qi;
-	int ret = 0;
-
-	if (queue >= ah->ah_capabilities.cap_queues.q_tx_num)
-		return 0;
-
-	mutex_lock(&sc->lock);
-
-	ath5k_hw_get_tx_queueprops(ah, queue, &qi);
-
-	qi.tqi_aifs = params->aifs;
-	qi.tqi_cw_min = params->cw_min;
-	qi.tqi_cw_max = params->cw_max;
-	qi.tqi_burst_time = params->txop;
-
-	ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
-		  "Configure tx [queue %d],  "
-		  "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
-		  queue, params->aifs, params->cw_min,
-		  params->cw_max, params->txop);
-
-	if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) {
-		ATH5K_ERR(sc,
-			  "Unable to update hardware queue %u!\n", queue);
-		ret = -EIO;
-	} else
-		ath5k_hw_reset_tx_queue(ah, queue);
-
-	mutex_unlock(&sc->lock);
-
-	return ret;
-}
-
-static const struct ieee80211_ops ath5k_hw_ops = {
-	.tx 		= ath5k_tx,
-	.start 		= ath5k_start,
-	.stop 		= ath5k_stop,
-	.add_interface 	= ath5k_add_interface,
-	.remove_interface = ath5k_remove_interface,
-	.config 	= ath5k_config,
-	.prepare_multicast = ath5k_prepare_multicast,
-	.configure_filter = ath5k_configure_filter,
-	.set_key 	= ath5k_set_key,
-	.get_stats 	= ath5k_get_stats,
-	.get_survey	= ath5k_get_survey,
-	.conf_tx	= ath5k_conf_tx,
-	.get_tsf 	= ath5k_get_tsf,
-	.set_tsf 	= ath5k_set_tsf,
-	.reset_tsf 	= ath5k_reset_tsf,
-	.bss_info_changed = ath5k_bss_info_changed,
-	.sw_scan_start	= ath5k_sw_scan_start,
-	.sw_scan_complete = ath5k_sw_scan_complete,
-	.set_coverage_class = ath5k_set_coverage_class,
-};
-
-/********************\
-* PCI Initialization *
-\********************/
-
-static int __devinit
-ath5k_pci_probe(struct pci_dev *pdev,
-		const struct pci_device_id *id)
-{
-	void __iomem *mem;
-	struct ath5k_softc *sc;
-	struct ath_common *common;
-	struct ieee80211_hw *hw;
-	int ret;
-	u8 csz;
-
-	/*
-	 * L0s needs to be disabled on all ath5k cards.
-	 *
-	 * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
-	 * by default in the future in 2.6.36) this will also mean both L1 and
-	 * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
-	 * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
-	 * though but cannot currently undue the effect of a blacklist, for
-	 * details you can read pcie_aspm_sanity_check() and see how it adjusts
-	 * the device link capability.
-	 *
-	 * It may be possible in the future to implement some PCI API to allow
-	 * drivers to override blacklists for pre 1.1 PCIe but for now it is
-	 * best to accept that both L0s and L1 will be disabled completely for
-	 * distributions shipping with CONFIG_PCIEASPM rather than having this
-	 * issue present. Motivation for adding this new API will be to help
-	 * with power consumption for some of these devices.
-	 */
-	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
-
-	ret = pci_enable_device(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "can't enable device\n");
-		goto err;
-	}
-
-	/* XXX 32-bit addressing only */
-	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (ret) {
-		dev_err(&pdev->dev, "32-bit DMA not available\n");
-		goto err_dis;
-	}
-
-	/*
-	 * Cache line size is used to size and align various
-	 * structures used to communicate with the hardware.
-	 */
-	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
-	if (csz == 0) {
-		/*
-		 * Linux 2.4.18 (at least) writes the cache line size
-		 * register as a 16-bit wide register which is wrong.
-		 * We must have this setup properly for rx buffer
-		 * DMA to work so force a reasonable value here if it
-		 * comes up zero.
-		 */
-		csz = L1_CACHE_BYTES >> 2;
-		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
-	}
-	/*
-	 * The default setting of latency timer yields poor results,
-	 * set it to the value used by other systems.  It may be worth
-	 * tweaking this setting more.
-	 */
-	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
-
-	/* Enable bus mastering */
-	pci_set_master(pdev);
-
-	/*
-	 * Disable the RETRY_TIMEOUT register (0x41) to keep
-	 * PCI Tx retries from interfering with C3 CPU state.
-	 */
-	pci_write_config_byte(pdev, 0x41, 0);
-
-	ret = pci_request_region(pdev, 0, "ath5k");
-	if (ret) {
-		dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
-		goto err_dis;
-	}
-
-	mem = pci_iomap(pdev, 0, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
-		ret = -EIO;
-		goto err_reg;
-	}
-
-	/*
-	 * Allocate hw (mac80211 main struct)
-	 * and hw->priv (driver private data)
-	 */
-	hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
-	if (hw == NULL) {
-		dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
-		ret = -ENOMEM;
-		goto err_map;
-	}
-
-	dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
-
-	/* Initialize driver private data */
-	SET_IEEE80211_DEV(hw, &pdev->dev);
-	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
-		    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
-		    IEEE80211_HW_SIGNAL_DBM;
-
-	hw->wiphy->interface_modes =
-		BIT(NL80211_IFTYPE_AP) |
-		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_ADHOC) |
-		BIT(NL80211_IFTYPE_MESH_POINT);
-
-	hw->extra_tx_headroom = 2;
-	hw->channel_change_time = 5000;
-	sc = hw->priv;
-	sc->hw = hw;
-	sc->pdev = pdev;
-
-	/*
-	 * Mark the device as detached to avoid processing
-	 * interrupts until setup is complete.
-	 */
-	__set_bit(ATH_STAT_INVALID, sc->status);
-
-	sc->iobase = mem; /* So we can unmap it on detach */
-	sc->opmode = NL80211_IFTYPE_STATION;
-	sc->bintval = 1000;
-	mutex_init(&sc->lock);
-	spin_lock_init(&sc->rxbuflock);
-	spin_lock_init(&sc->txbuflock);
-	spin_lock_init(&sc->block);
-
-	/* Set private data */
-	pci_set_drvdata(pdev, sc);
-
-	/* Setup interrupt handler */
-	ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
-	if (ret) {
-		ATH5K_ERR(sc, "request_irq failed\n");
-		goto err_free;
-	}
-
-	/* If we passed the test, malloc an ath5k_hw struct */
-	sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
-	if (!sc->ah) {
-		ret = -ENOMEM;
-		ATH5K_ERR(sc, "out of memory\n");
-		goto err_irq;
-	}
-
-	sc->ah->ah_sc = sc;
-	sc->ah->ah_iobase = sc->iobase;
-	common = ath5k_hw_common(sc->ah);
-	common->ops = &ath5k_common_ops;
-	common->ah = sc->ah;
-	common->hw = hw;
-	common->cachelsz = csz << 2; /* convert to bytes */
-	spin_lock_init(&common->cc_lock);
-
-	/* Initialize device */
-	ret = ath5k_hw_attach(sc);
-	if (ret) {
-		goto err_free_ah;
-	}
-
-	/* set up multi-rate retry capabilities */
-	if (sc->ah->ah_version == AR5K_AR5212) {
-		hw->max_rates = 4;
-		hw->max_rate_tries = 11;
-	}
-
-	hw->vif_data_size = sizeof(struct ath5k_vif);
-
-	/* Finish private driver data initialization */
-	ret = ath5k_attach(pdev, hw);
-	if (ret)
-		goto err_ah;
-
-	ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
-			ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
-					sc->ah->ah_mac_srev,
-					sc->ah->ah_phy_revision);
-
-	if (!sc->ah->ah_single_chip) {
-		/* Single chip radio (!RF5111) */
-		if (sc->ah->ah_radio_5ghz_revision &&
-			!sc->ah->ah_radio_2ghz_revision) {
-			/* No 5GHz support -> report 2GHz radio */
-			if (!test_bit(AR5K_MODE_11A,
-				sc->ah->ah_capabilities.cap_mode)) {
-				ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
-					ath5k_chip_name(AR5K_VERSION_RAD,
-						sc->ah->ah_radio_5ghz_revision),
-						sc->ah->ah_radio_5ghz_revision);
-			/* No 2GHz support (5110 and some
-			 * 5Ghz only cards) -> report 5Ghz radio */
-			} else if (!test_bit(AR5K_MODE_11B,
-				sc->ah->ah_capabilities.cap_mode)) {
-				ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
-					ath5k_chip_name(AR5K_VERSION_RAD,
-						sc->ah->ah_radio_5ghz_revision),
-						sc->ah->ah_radio_5ghz_revision);
-			/* Multiband radio */
-			} else {
-				ATH5K_INFO(sc, "RF%s multiband radio found"
-					" (0x%x)\n",
-					ath5k_chip_name(AR5K_VERSION_RAD,
-						sc->ah->ah_radio_5ghz_revision),
-						sc->ah->ah_radio_5ghz_revision);
-			}
-		}
-		/* Multi chip radio (RF5111 - RF2111) ->
-		 * report both 2GHz/5GHz radios */
-		else if (sc->ah->ah_radio_5ghz_revision &&
-				sc->ah->ah_radio_2ghz_revision){
-			ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
-				ath5k_chip_name(AR5K_VERSION_RAD,
-					sc->ah->ah_radio_5ghz_revision),
-					sc->ah->ah_radio_5ghz_revision);
-			ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
-				ath5k_chip_name(AR5K_VERSION_RAD,
-					sc->ah->ah_radio_2ghz_revision),
-					sc->ah->ah_radio_2ghz_revision);
-		}
-	}
-
-	ath5k_debug_init_device(sc);
-
-	/* ready to process interrupts */
-	__clear_bit(ATH_STAT_INVALID, sc->status);
-
-	return 0;
-err_ah:
-	ath5k_hw_detach(sc->ah);
-err_free_ah:
-	kfree(sc->ah);
-err_irq:
-	free_irq(pdev->irq, sc);
-err_free:
-	ieee80211_free_hw(hw);
-err_map:
-	pci_iounmap(pdev, mem);
-err_reg:
-	pci_release_region(pdev, 0);
-err_dis:
-	pci_disable_device(pdev);
-err:
-	return ret;
-}
-
-static void __devexit
-ath5k_pci_remove(struct pci_dev *pdev)
-{
-	struct ath5k_softc *sc = pci_get_drvdata(pdev);
-
-	ath5k_debug_finish_device(sc);
-	ath5k_detach(pdev, sc->hw);
-	ath5k_hw_detach(sc->ah);
-	kfree(sc->ah);
-	free_irq(pdev->irq, sc);
-	pci_iounmap(pdev, sc->iobase);
-	pci_release_region(pdev, 0);
-	pci_disable_device(pdev);
-	ieee80211_free_hw(sc->hw);
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int ath5k_pci_suspend(struct device *dev)
-{
-	struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
-
-	ath5k_led_off(sc);
-	return 0;
-}
-
-static int ath5k_pci_resume(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct ath5k_softc *sc = pci_get_drvdata(pdev);
-
-	/*
-	 * Suspend/Resume resets the PCI configuration space, so we have to
-	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
-	 * PCI Tx retries from interfering with C3 CPU state
-	 */
-	pci_write_config_byte(pdev, 0x41, 0);
-
-	ath5k_led_enable(sc);
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
-#define ATH5K_PM_OPS	(&ath5k_pm_ops)
-#else
-#define ATH5K_PM_OPS	NULL
-#endif /* CONFIG_PM_SLEEP */
-
-static struct pci_driver ath5k_pci_driver = {
-	.name		= KBUILD_MODNAME,
-	.id_table	= ath5k_pci_id_table,
-	.probe		= ath5k_pci_probe,
-	.remove		= __devexit_p(ath5k_pci_remove),
-	.driver.pm	= ATH5K_PM_OPS,
-};
-
-/*
- * Module init/exit functions
- */
-static int __init
-init_ath5k_pci(void)
-{
-	int ret;
-
-	ret = pci_register_driver(&ath5k_pci_driver);
-	if (ret) {
-		printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
-		return ret;
-	}
-
-	return 0;
-}
-
-static void __exit
-exit_ath5k_pci(void)
-{
-	pci_unregister_driver(&ath5k_pci_driver);
-}
-
-module_init(init_ath5k_pci);
-module_exit(exit_ath5k_pci);
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index 9a79773cdc2..6d511476e4d 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -169,7 +169,10 @@ struct ath5k_vif {
 /* Software Carrier, keeps track of the driver state
  * associated with an instance of a device */
 struct ath5k_softc {
-	struct pci_dev		*pdev;		/* for dma mapping */
+	struct pci_dev		*pdev;
+	struct device		*dev;		/* for dma mapping */
+	int irq;
+	u16 devid;
 	void __iomem		*iobase;	/* address of the device */
 	struct mutex		lock;		/* dev-level lock */
 	struct ieee80211_hw	*hw;		/* IEEE 802.11 common */
@@ -255,6 +258,8 @@ struct ath5k_softc {
 	struct tasklet_struct	ani_tasklet;	/* ANI calibration */
 
 	struct delayed_work	tx_complete_work;
+
+	struct survey_info	survey;		/* collected survey info */
 };
 
 #define ath5k_hw_hasbssidmask(_ah) \
diff --git a/drivers/net/wireless/ath/ath5k/caps.c b/drivers/net/wireless/ath/ath5k/caps.c
index beae519aa73..31cad80e9b0 100644
--- a/drivers/net/wireless/ath/ath5k/caps.c
+++ b/drivers/net/wireless/ath/ath5k/caps.c
@@ -49,7 +49,6 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
 
 		/* Set supported modes */
 		__set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode);
-		__set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode);
 	} else {
 		/*
 		 * XXX The tranceiver supports frequencies from 4920 to 6100GHz
@@ -74,11 +73,6 @@ int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
 			/* Set supported modes */
 			__set_bit(AR5K_MODE_11A,
 					ah->ah_capabilities.cap_mode);
-			__set_bit(AR5K_MODE_11A_TURBO,
-					ah->ah_capabilities.cap_mode);
-			if (ah->ah_version == AR5K_AR5212)
-				__set_bit(AR5K_MODE_11G_TURBO,
-						ah->ah_capabilities.cap_mode);
 		}
 
 		/* Enable  802.11b if a 2GHz capable radio (2111/5112) is
diff --git a/drivers/net/wireless/ath/ath5k/debug.c b/drivers/net/wireless/ath/ath5k/debug.c
index acda56ee521..d2f84d76bb0 100644
--- a/drivers/net/wireless/ath/ath5k/debug.c
+++ b/drivers/net/wireless/ath/ath5k/debug.c
@@ -60,7 +60,6 @@
 
 #include "base.h"
 #include "debug.h"
-#include "../debug.h"
 
 static unsigned int ath5k_debug;
 module_param_named(debug, ath5k_debug, uint, 0);
@@ -312,6 +311,7 @@ static const struct {
 	{ ATH5K_DEBUG_DUMP_RX,	"dumprx",	"print received skb content" },
 	{ ATH5K_DEBUG_DUMP_TX,	"dumptx",	"print transmit skb content" },
 	{ ATH5K_DEBUG_DUMPBANDS, "dumpbands",	"dump bands" },
+	{ ATH5K_DEBUG_DMA,	"dma",		"dma start/stop" },
 	{ ATH5K_DEBUG_ANI,	"ani",		"adaptive noise immunity" },
 	{ ATH5K_DEBUG_DESC,	"desc",		"descriptor chains" },
 	{ ATH5K_DEBUG_ANY,	"all",		"show all debug levels" },
@@ -554,63 +554,63 @@ static ssize_t read_file_frameerrors(struct file *file, char __user *user_buf,
 
 	len += snprintf(buf+len, sizeof(buf)-len,
 			"RX\n---------------------\n");
-	len += snprintf(buf+len, sizeof(buf)-len, "CRC\t%d\t(%d%%)\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "CRC\t%u\t(%u%%)\n",
 			st->rxerr_crc,
 			st->rx_all_count > 0 ?
 				st->rxerr_crc*100/st->rx_all_count : 0);
-	len += snprintf(buf+len, sizeof(buf)-len, "PHY\t%d\t(%d%%)\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "PHY\t%u\t(%u%%)\n",
 			st->rxerr_phy,
 			st->rx_all_count > 0 ?
 				st->rxerr_phy*100/st->rx_all_count : 0);
 	for (i = 0; i < 32; i++) {
 		if (st->rxerr_phy_code[i])
 			len += snprintf(buf+len, sizeof(buf)-len,
-				" phy_err[%d]\t%d\n",
+				" phy_err[%u]\t%u\n",
 				i, st->rxerr_phy_code[i]);
 	}
 
-	len += snprintf(buf+len, sizeof(buf)-len, "FIFO\t%d\t(%d%%)\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "FIFO\t%u\t(%u%%)\n",
 			st->rxerr_fifo,
 			st->rx_all_count > 0 ?
 				st->rxerr_fifo*100/st->rx_all_count : 0);
-	len += snprintf(buf+len, sizeof(buf)-len, "decrypt\t%d\t(%d%%)\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "decrypt\t%u\t(%u%%)\n",
 			st->rxerr_decrypt,
 			st->rx_all_count > 0 ?
 				st->rxerr_decrypt*100/st->rx_all_count : 0);
-	len += snprintf(buf+len, sizeof(buf)-len, "MIC\t%d\t(%d%%)\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "MIC\t%u\t(%u%%)\n",
 			st->rxerr_mic,
 			st->rx_all_count > 0 ?
 				st->rxerr_mic*100/st->rx_all_count : 0);
-	len += snprintf(buf+len, sizeof(buf)-len, "process\t%d\t(%d%%)\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "process\t%u\t(%u%%)\n",
 			st->rxerr_proc,
 			st->rx_all_count > 0 ?
 				st->rxerr_proc*100/st->rx_all_count : 0);
-	len += snprintf(buf+len, sizeof(buf)-len, "jumbo\t%d\t(%d%%)\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "jumbo\t%u\t(%u%%)\n",
 			st->rxerr_jumbo,
 			st->rx_all_count > 0 ?
 				st->rxerr_jumbo*100/st->rx_all_count : 0);
-	len += snprintf(buf+len, sizeof(buf)-len, "[RX all\t%d]\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "[RX all\t%u]\n",
 			st->rx_all_count);
-	len += snprintf(buf+len, sizeof(buf)-len, "RX-all-bytes\t%d\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "RX-all-bytes\t%u\n",
 			st->rx_bytes_count);
 
 	len += snprintf(buf+len, sizeof(buf)-len,
 			"\nTX\n---------------------\n");
-	len += snprintf(buf+len, sizeof(buf)-len, "retry\t%d\t(%d%%)\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "retry\t%u\t(%u%%)\n",
 			st->txerr_retry,
 			st->tx_all_count > 0 ?
 				st->txerr_retry*100/st->tx_all_count : 0);
-	len += snprintf(buf+len, sizeof(buf)-len, "FIFO\t%d\t(%d%%)\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "FIFO\t%u\t(%u%%)\n",
 			st->txerr_fifo,
 			st->tx_all_count > 0 ?
 				st->txerr_fifo*100/st->tx_all_count : 0);
-	len += snprintf(buf+len, sizeof(buf)-len, "filter\t%d\t(%d%%)\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "filter\t%u\t(%u%%)\n",
 			st->txerr_filt,
 			st->tx_all_count > 0 ?
 				st->txerr_filt*100/st->tx_all_count : 0);
-	len += snprintf(buf+len, sizeof(buf)-len, "[TX all\t%d]\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "[TX all\t%u]\n",
 			st->tx_all_count);
-	len += snprintf(buf+len, sizeof(buf)-len, "TX-all-bytes\t%d\n",
+	len += snprintf(buf+len, sizeof(buf)-len, "TX-all-bytes\t%u\n",
 			st->tx_bytes_count);
 
 	if (len > sizeof(buf))
@@ -719,7 +719,7 @@ static ssize_t read_file_ani(struct file *file, char __user *user_buf,
 			st->mib_intr);
 	len += snprintf(buf+len, sizeof(buf)-len,
 			"beacon RSSI average:\t%d\n",
-			sc->ah->ah_beacon_rssi_avg.avg);
+			(int)ewma_read(&sc->ah->ah_beacon_rssi_avg));
 
 #define CC_PRINT(_struct, _field) \
 	_struct._field, \
diff --git a/drivers/net/wireless/ath/ath5k/debug.h b/drivers/net/wireless/ath/ath5k/debug.h
index 236edbd2507..3e34428d512 100644
--- a/drivers/net/wireless/ath/ath5k/debug.h
+++ b/drivers/net/wireless/ath/ath5k/debug.h
@@ -95,6 +95,7 @@ struct ath5k_dbg_info {
  * @ATH5K_DEBUG_DUMP_RX: print received skb content
  * @ATH5K_DEBUG_DUMP_TX: print transmit skb content
  * @ATH5K_DEBUG_DUMPBANDS: dump bands
+ * @ATH5K_DEBUG_DMA: debug dma start/stop
  * @ATH5K_DEBUG_TRACE: trace function calls
  * @ATH5K_DEBUG_DESC: descriptor setup
  * @ATH5K_DEBUG_ANY: show at any debug level
@@ -118,6 +119,7 @@ enum ath5k_debug_level {
 	ATH5K_DEBUG_DUMP_RX	= 0x00000100,
 	ATH5K_DEBUG_DUMP_TX	= 0x00000200,
 	ATH5K_DEBUG_DUMPBANDS	= 0x00000400,
+	ATH5K_DEBUG_DMA		= 0x00000800,
 	ATH5K_DEBUG_ANI		= 0x00002000,
 	ATH5K_DEBUG_DESC	= 0x00004000,
 	ATH5K_DEBUG_ANY		= 0xffffffff
diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
index 43244382f21..16b44ff7dd3 100644
--- a/drivers/net/wireless/ath/ath5k/desc.c
+++ b/drivers/net/wireless/ath/ath5k/desc.c
@@ -26,9 +26,10 @@
 #include "debug.h"
 #include "base.h"
 
-/*
- * TX Descriptors
- */
+
+/************************\
+* TX Control descriptors *
+\************************/
 
 /*
  * Initialize the 2-word tx control descriptor on 5210/5211
@@ -335,6 +336,11 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 	return 0;
 }
 
+
+/***********************\
+* TX Status descriptors *
+\***********************/
+
 /*
  * Proccess the tx status descriptor on 5210/5211
  */
@@ -476,9 +482,10 @@ static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
 	return 0;
 }
 
-/*
- * RX Descriptors
- */
+
+/****************\
+* RX Descriptors *
+\****************/
 
 /*
  * Initialize an rx control descriptor
@@ -666,6 +673,11 @@ static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
 	return 0;
 }
 
+
+/********\
+* Attach *
+\********/
+
 /*
  * Init function pointers inside ath5k_hw struct
  */
diff --git a/drivers/net/wireless/ath/ath5k/desc.h b/drivers/net/wireless/ath/ath5k/desc.h
index b2adb2a281c..2509d0bf037 100644
--- a/drivers/net/wireless/ath/ath5k/desc.h
+++ b/drivers/net/wireless/ath/ath5k/desc.h
@@ -26,7 +26,7 @@
 struct ath5k_hw_rx_ctl {
 	u32	rx_control_0; /* RX control word 0 */
 	u32	rx_control_1; /* RX control word 1 */
-} __packed;
+} __packed __aligned(4);
 
 /* RX control word 1 fields/flags */
 #define AR5K_DESC_RX_CTL1_BUF_LEN		0x00000fff /* data buffer length */
@@ -39,7 +39,7 @@ struct ath5k_hw_rx_ctl {
 struct ath5k_hw_rx_status {
 	u32	rx_status_0; /* RX status word 0 */
 	u32	rx_status_1; /* RX status word 1 */
-} __packed;
+} __packed __aligned(4);
 
 /* 5210/5211 */
 /* RX status word 0 fields/flags */
@@ -129,7 +129,7 @@ enum ath5k_phy_error_code {
 struct ath5k_hw_2w_tx_ctl {
 	u32	tx_control_0; /* TX control word 0 */
 	u32	tx_control_1; /* TX control word 1 */
-} __packed;
+} __packed __aligned(4);
 
 /* TX control word 0 fields/flags */
 #define AR5K_2W_TX_DESC_CTL0_FRAME_LEN		0x00000fff /* frame length */
@@ -185,7 +185,7 @@ struct ath5k_hw_4w_tx_ctl {
 	u32	tx_control_1; /* TX control word 1 */
 	u32	tx_control_2; /* TX control word 2 */
 	u32	tx_control_3; /* TX control word 3 */
-} __packed;
+} __packed __aligned(4);
 
 /* TX control word 0 fields/flags */
 #define AR5K_4W_TX_DESC_CTL0_FRAME_LEN		0x00000fff /* frame length */
@@ -244,7 +244,7 @@ struct ath5k_hw_4w_tx_ctl {
 struct ath5k_hw_tx_status {
 	u32	tx_status_0; /* TX status word 0 */
 	u32	tx_status_1; /* TX status word 1 */
-} __packed;
+} __packed __aligned(4);
 
 /* TX status word 0 fields/flags */
 #define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK	0x00000001 /* TX success */
@@ -282,7 +282,7 @@ struct ath5k_hw_tx_status {
 struct ath5k_hw_5210_tx_desc {
 	struct ath5k_hw_2w_tx_ctl	tx_ctl;
 	struct ath5k_hw_tx_status	tx_stat;
-} __packed;
+} __packed __aligned(4);
 
 /*
  * 5212 hardware TX descriptor
@@ -290,7 +290,7 @@ struct ath5k_hw_5210_tx_desc {
 struct ath5k_hw_5212_tx_desc {
 	struct ath5k_hw_4w_tx_ctl	tx_ctl;
 	struct ath5k_hw_tx_status	tx_stat;
-} __packed;
+} __packed __aligned(4);
 
 /*
  * Common hardware RX descriptor
@@ -298,7 +298,7 @@ struct ath5k_hw_5212_tx_desc {
 struct ath5k_hw_all_rx_desc {
 	struct ath5k_hw_rx_ctl		rx_ctl;
 	struct ath5k_hw_rx_status	rx_stat;
-} __packed;
+} __packed __aligned(4);
 
 /*
  * Atheros hardware DMA descriptor
@@ -313,7 +313,7 @@ struct ath5k_desc {
 		struct ath5k_hw_5212_tx_desc	ds_tx5212;
 		struct ath5k_hw_all_rx_desc	ds_rx;
 	} ud;
-} __packed;
+} __packed __aligned(4);
 
 #define AR5K_RXDESC_INTREQ	0x0020
 
diff --git a/drivers/net/wireless/ath/ath5k/dma.c b/drivers/net/wireless/ath/ath5k/dma.c
index 923c9ca5c4f..0064be7ce5c 100644
--- a/drivers/net/wireless/ath/ath5k/dma.c
+++ b/drivers/net/wireless/ath/ath5k/dma.c
@@ -37,6 +37,7 @@
 #include "debug.h"
 #include "base.h"
 
+
 /*********\
 * Receive *
 \*********/
@@ -57,7 +58,7 @@ void ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
  *
  * @ah:	The &struct ath5k_hw
  */
-int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
+static int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
 {
 	unsigned int i;
 
@@ -69,7 +70,11 @@ int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
 	for (i = 1000; i > 0 &&
 			(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
 			i--)
-		udelay(10);
+		udelay(100);
+
+	if (!i)
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_DMA,
+				"failed to stop RX DMA !\n");
 
 	return i ? 0 : -EBUSY;
 }
@@ -90,11 +95,18 @@ u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah)
  * @ah: The &struct ath5k_hw
  * @phys_addr: RX descriptor address
  *
- * XXX: Should we check if rx is enabled before setting rxdp ?
+ * Returns -EIO if rx is active
  */
-void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
+int ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
 {
+	if (ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_DMA,
+				"tried to set RXDP while rx was active !\n");
+		return -EIO;
+	}
+
 	ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
+	return 0;
 }
 
 
@@ -125,7 +137,7 @@ int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
 	/* Return if queue is declared inactive */
 	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return -EIO;
+		return -EINVAL;
 
 	if (ah->ah_version == AR5K_AR5210) {
 		tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
@@ -173,10 +185,10 @@ int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
  *
  * Stop DMA transmit on a specific hw queue and drain queue so we don't
  * have any pending frames. Returns -EBUSY if we still have pending frames,
- * -EINVAL if queue number is out of range.
+ * -EINVAL if queue number is out of range or inactive.
  *
  */
-int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+static int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 {
 	unsigned int i = 40;
 	u32 tx_queue, pending;
@@ -185,7 +197,7 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
 	/* Return if queue is declared inactive */
 	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return -EIO;
+		return -EINVAL;
 
 	if (ah->ah_version == AR5K_AR5210) {
 		tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
@@ -211,12 +223,31 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
 		ath5k_hw_reg_read(ah, AR5K_CR);
 	} else {
+
+		/*
+		 * Enable DCU early termination to quickly
+		 * flush any pending frames from QCU
+		 */
+		AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+					AR5K_QCU_MISC_DCU_EARLY);
+
 		/*
 		 * Schedule TX disable and wait until queue is empty
 		 */
 		AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
 
-		/*Check for pending frames*/
+		/* Wait for queue to stop */
+		for (i = 1000; i > 0 &&
+		(AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue) != 0);
+		i--)
+			udelay(100);
+
+		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+			ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_DMA,
+				"queue %i didn't stop !\n", queue);
+
+		/* Check for pending frames */
+		i = 1000;
 		do {
 			pending = ath5k_hw_reg_read(ah,
 				AR5K_QUEUE_STATUS(queue)) &
@@ -247,12 +278,12 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 					AR5K_DIAG_SW_CHANNEL_IDLE_HIGH);
 
 			/* Wait a while and disable mechanism */
-			udelay(200);
+			udelay(400);
 			AR5K_REG_DISABLE_BITS(ah, AR5K_QUIET_CTL1,
 						AR5K_QUIET_CTL1_QT_EN);
 
 			/* Re-check for pending frames */
-			i = 40;
+			i = 100;
 			do {
 				pending = ath5k_hw_reg_read(ah,
 					AR5K_QUEUE_STATUS(queue)) &
@@ -262,12 +293,27 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 
 			AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW_5211,
 					AR5K_DIAG_SW_CHANNEL_IDLE_HIGH);
+
+			if (pending)
+				ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_DMA,
+					"quiet mechanism didn't work q:%i !\n",
+					queue);
 		}
 
+		/*
+		 * Disable DCU early termination
+		 */
+		AR5K_REG_DISABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+					AR5K_QCU_MISC_DCU_EARLY);
+
 		/* Clear register */
 		ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
-		if (pending)
+		if (pending) {
+			ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_DMA,
+					"tx dma didn't stop (q:%i, frm:%i) !\n",
+					queue, pending);
 			return -EBUSY;
+		}
 	}
 
 	/* TODO: Check for success on 5210 else return error */
@@ -275,6 +321,26 @@ int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
 }
 
 /**
+ * ath5k_hw_stop_beacon_queue - Stop beacon queue
+ *
+ * @ah The &struct ath5k_hw
+ * @queue The queue number
+ *
+ * Returns -EIO if queue didn't stop
+ */
+int ath5k_hw_stop_beacon_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+	int ret;
+	ret = ath5k_hw_stop_tx_dma(ah, queue);
+	if (ret) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_DMA,
+				"beacon queue didn't stop !\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+/**
  * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue
  *
  * @ah: The &struct ath5k_hw
@@ -427,6 +493,7 @@ done:
 	return ret;
 }
 
+
 /*******************\
 * Interrupt masking *
 \*******************/
@@ -688,3 +755,92 @@ enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
 	return old_mask;
 }
 
+
+/********************\
+ Init/Stop functions
+\********************/
+
+/**
+ * ath5k_hw_dma_init - Initialize DMA unit
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Set DMA size and pre-enable interrupts
+ * (driver handles tx/rx buffer setup and
+ * dma start/stop)
+ *
+ * XXX: Save/restore RXDP/TXDP registers ?
+ */
+void ath5k_hw_dma_init(struct ath5k_hw *ah)
+{
+	/*
+	 * Set Rx/Tx DMA Configuration
+	 *
+	 * Set standard DMA size (128). Note that
+	 * a DMA size of 512 causes rx overruns and tx errors
+	 * on pci-e cards (tested on 5424 but since rx overruns
+	 * also occur on 5416/5418 with madwifi we set 128
+	 * for all PCI-E cards to be safe).
+	 *
+	 * XXX: need to check 5210 for this
+	 * TODO: Check out tx triger level, it's always 64 on dumps but I
+	 * guess we can tweak it and see how it goes ;-)
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+			AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
+		AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
+			AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B);
+	}
+
+	/* Pre-enable interrupts on 5211/5212*/
+	if (ah->ah_version != AR5K_AR5210)
+		ath5k_hw_set_imr(ah, ah->ah_imr);
+
+}
+
+/**
+ * ath5k_hw_dma_stop - stop DMA unit
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Stop tx/rx DMA and interrupts. Returns
+ * -EBUSY if tx or rx dma failed to stop.
+ *
+ * XXX: Sometimes DMA unit hangs and we have
+ * stuck frames on tx queues, only a reset
+ * can fix that.
+ */
+int ath5k_hw_dma_stop(struct ath5k_hw *ah)
+{
+	int i, qmax, err;
+	err = 0;
+
+	/* Disable interrupts */
+	ath5k_hw_set_imr(ah, 0);
+
+	/* Stop rx dma */
+	err = ath5k_hw_stop_rx_dma(ah);
+	if (err)
+		return err;
+
+	/* Clear any pending interrupts
+	 * and disable tx dma */
+	if (ah->ah_version != AR5K_AR5210) {
+		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
+		qmax = AR5K_NUM_TX_QUEUES;
+	} else {
+		/* PISR/SISR Not available on 5210 */
+		ath5k_hw_reg_read(ah, AR5K_ISR);
+		qmax = AR5K_NUM_TX_QUEUES_NOQCU;
+	}
+
+	for (i = 0; i < qmax; i++) {
+		err = ath5k_hw_stop_tx_dma(ah, i);
+		/* -EINVAL -> queue inactive */
+		if (err != -EINVAL)
+			return err;
+	}
+
+	return err;
+}
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index 39722dd73e4..80e625608ba 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -28,45 +28,16 @@
 #include "debug.h"
 #include "base.h"
 
-/*
- * Read from eeprom
- */
-static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data)
-{
-	u32 status, timeout;
-
-	/*
-	 * Initialize EEPROM access
-	 */
-	if (ah->ah_version == AR5K_AR5210) {
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
-		(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
-	} else {
-		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
-				AR5K_EEPROM_CMD_READ);
-	}
-
-	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
-		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
-		if (status & AR5K_EEPROM_STAT_RDDONE) {
-			if (status & AR5K_EEPROM_STAT_RDERR)
-				return -EIO;
-			*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
-					0xffff);
-			return 0;
-		}
-		udelay(15);
-	}
 
-	return -ETIMEDOUT;
-}
+/******************\
+* Helper functions *
+\******************/
 
 /*
  * Translate binary channel representation in EEPROM to frequency
  */
 static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin,
-                                 unsigned int mode)
+							unsigned int mode)
 {
 	u16 val;
 
@@ -89,6 +60,11 @@ static u16 ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee, u16 bin,
 	return val;
 }
 
+
+/*********\
+* Parsers *
+\*********/
+
 /*
  * Initialize eeprom & capabilities structs
  */
@@ -198,7 +174,7 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah)
 	 *
 	 * XXX: Serdes values seem to be fixed so
 	 * no need to read them here, we write them
-	 * during ath5k_hw_attach */
+	 * during ath5k_hw_init */
 	AR5K_EEPROM_READ(AR5K_EEPROM_PCIE_OFFSET, val);
 	ee->ee_serdes = (val == AR5K_EEPROM_PCIE_SERDES_SECTION) ?
 							true : false;
@@ -647,6 +623,7 @@ ath5k_eeprom_init_11bg_2413(struct ath5k_hw *ah, unsigned int mode, int offset)
 	return 0;
 }
 
+
 /*
  * Read power calibration for RF5111 chips
  *
@@ -1514,6 +1491,7 @@ ath5k_eeprom_read_target_rate_pwr_info(struct ath5k_hw *ah, unsigned int mode)
 	return 0;
 }
 
+
 /*
  * Read per channel calibration info from EEPROM
  *
@@ -1607,15 +1585,6 @@ ath5k_eeprom_free_pcal_info(struct ath5k_hw *ah, int mode)
 	return 0;
 }
 
-void
-ath5k_eeprom_detach(struct ath5k_hw *ah)
-{
-	u8 mode;
-
-	for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++)
-		ath5k_eeprom_free_pcal_info(ah, mode);
-}
-
 /* Read conformance test limits used for regulatory control */
 static int
 ath5k_eeprom_read_ctl_info(struct ath5k_hw *ah)
@@ -1757,6 +1726,44 @@ ath5k_eeprom_read_spur_chans(struct ath5k_hw *ah)
 }
 
 /*
+ * Read the MAC address from eeprom
+ */
+int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+	u8 mac_d[ETH_ALEN] = {};
+	u32 total, offset;
+	u16 data;
+	int octet, ret;
+
+	ret = ath5k_hw_nvram_read(ah, 0x20, &data);
+	if (ret)
+		return ret;
+
+	for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
+		ret = ath5k_hw_nvram_read(ah, offset, &data);
+		if (ret)
+			return ret;
+
+		total += data;
+		mac_d[octet + 1] = data & 0xff;
+		mac_d[octet] = data >> 8;
+		octet += 2;
+	}
+
+	if (!total || total == 3 * 0xffff)
+		return -EINVAL;
+
+	memcpy(mac, mac_d, ETH_ALEN);
+
+	return 0;
+}
+
+
+/***********************\
+* Init/Detach functions *
+\***********************/
+
+/*
  * Initialize eeprom data structure
  */
 int
@@ -1787,35 +1794,27 @@ ath5k_eeprom_init(struct ath5k_hw *ah)
 	return 0;
 }
 
-/*
- * Read the MAC address from eeprom
- */
-int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+void
+ath5k_eeprom_detach(struct ath5k_hw *ah)
 {
-	u8 mac_d[ETH_ALEN] = {};
-	u32 total, offset;
-	u16 data;
-	int octet, ret;
-
-	ret = ath5k_hw_eeprom_read(ah, 0x20, &data);
-	if (ret)
-		return ret;
+	u8 mode;
 
-	for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
-		ret = ath5k_hw_eeprom_read(ah, offset, &data);
-		if (ret)
-			return ret;
+	for (mode = AR5K_EEPROM_MODE_11A; mode <= AR5K_EEPROM_MODE_11G; mode++)
+		ath5k_eeprom_free_pcal_info(ah, mode);
+}
 
-		total += data;
-		mac_d[octet + 1] = data & 0xff;
-		mac_d[octet] = data >> 8;
-		octet += 2;
+int
+ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
+{
+	switch (channel->hw_value & CHANNEL_MODES) {
+	case CHANNEL_A:
+	case CHANNEL_XR:
+		return AR5K_EEPROM_MODE_11A;
+	case CHANNEL_G:
+		return AR5K_EEPROM_MODE_11G;
+	case CHANNEL_B:
+		return AR5K_EEPROM_MODE_11B;
+	default:
+		return -1;
 	}
-
-	if (!total || total == 3 * 0xffff)
-		return -EINVAL;
-
-	memcpy(mac, mac_d, ETH_ALEN);
-
-	return 0;
 }
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.h b/drivers/net/wireless/ath/ath5k/eeprom.h
index c4a6d5f26af..7c09e150dbd 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.h
+++ b/drivers/net/wireless/ath/ath5k/eeprom.h
@@ -241,7 +241,7 @@ enum ath5k_eeprom_freq_bands{
 #define	AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz	6250
 
 #define AR5K_EEPROM_READ(_o, _v) do {			\
-	ret = ath5k_hw_eeprom_read(ah, (_o), &(_v));	\
+	ret = ath5k_hw_nvram_read(ah, (_o), &(_v));	\
 	if (ret)					\
 		return ret;				\
 } while (0)
@@ -517,3 +517,5 @@ struct ath5k_eeprom_info {
 	u32	ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
 };
 
+int
+ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel);
diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c
index 8fa43930882..e49340d18df 100644
--- a/drivers/net/wireless/ath/ath5k/initvals.c
+++ b/drivers/net/wireless/ath/ath5k/initvals.c
@@ -44,7 +44,7 @@ struct ath5k_ini {
 
 struct ath5k_ini_mode {
 	u16	mode_register;
-	u32	mode_value[5];
+	u32	mode_value[3];
 };
 
 /* Initial register settings for AR5210 */
@@ -391,76 +391,74 @@ static const struct ath5k_ini ar5211_ini[] = {
  */
 static const struct ath5k_ini_mode ar5211_ini_mode[] = {
 	{ AR5K_TXCFG,
-	/*	  a	    aTurbo	  b	  g (OFDM)    */
-	   { 0x00000015, 0x00000015, 0x0000001d, 0x00000015 } },
+	/*	A/XR          B           G       */
+	   { 0x00000015, 0x0000001d, 0x00000015 } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(0),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(1),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(2),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(3),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(4),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(5),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(6),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(7),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(8),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(9),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_DCU_GBL_IFS_SLOT,
-	   { 0x00000168, 0x000001e0, 0x000001b8, 0x00000168 } },
+	   { 0x00000168, 0x000001b8, 0x00000168 } },
 	{ AR5K_DCU_GBL_IFS_SIFS,
-	   { 0x00000230, 0x000001e0, 0x000000b0, 0x00000230 } },
+	   { 0x00000230, 0x000000b0, 0x00000230 } },
 	{ AR5K_DCU_GBL_IFS_EIFS,
-	   { 0x00000d98, 0x00001180, 0x00001f48, 0x00000d98 } },
+	   { 0x00000d98, 0x00001f48, 0x00000d98 } },
 	{ AR5K_DCU_GBL_IFS_MISC,
-	   { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000a0e0 } },
+	   { 0x0000a0e0, 0x00005880, 0x0000a0e0 } },
 	{ AR5K_TIME_OUT,
-	   { 0x04000400, 0x08000800, 0x20003000, 0x04000400 } },
+	   { 0x04000400, 0x20003000, 0x04000400 } },
 	{ AR5K_USEC_5211,
-	   { 0x0e8d8fa7, 0x0e8d8fcf, 0x01608f95, 0x0e8d8fa7 } },
-	{ AR5K_PHY_TURBO,
-	   { 0x00000000, 0x00000003, 0x00000000, 0x00000000 } },
+	   { 0x0e8d8fa7, 0x01608f95, 0x0e8d8fa7 } },
 	{ AR5K_PHY(8),
-	   { 0x02020200, 0x02020200, 0x02010200, 0x02020200 } },
-	{ AR5K_PHY(9),
-	   { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e } },
-	{ AR5K_PHY(10),
-	   { 0x0a020001, 0x0a020001, 0x05010000, 0x0a020001 } },
-	{ AR5K_PHY(13),
-	   { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
-	{ AR5K_PHY(14),
-	   { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b } },
-	{ AR5K_PHY(17),
-	   { 0x1372169c, 0x137216a5, 0x137216a8, 0x1372169c } },
-	{ AR5K_PHY(18),
-	   { 0x0018ba67, 0x0018ba67, 0x0018ba69, 0x0018ba69 } },
-	{ AR5K_PHY(20),
-	   { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } },
+	   { 0x02020200, 0x02010200, 0x02020200 } },
+	{ AR5K_PHY_RF_CTL2,
+	   { 0x00000e0e, 0x00000707, 0x00000e0e } },
+	{ AR5K_PHY_RF_CTL3,
+	   { 0x0a020001, 0x05010000, 0x0a020001 } },
+	{ AR5K_PHY_RF_CTL4,
+	   { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+	{ AR5K_PHY_PA_CTL,
+	   { 0x00000007, 0x0000000b, 0x0000000b } },
+	{ AR5K_PHY_SETTLING,
+	   { 0x1372169c, 0x137216a8, 0x1372169c } },
+	{ AR5K_PHY_GAIN,
+	   { 0x0018ba67, 0x0018ba69, 0x0018ba69 } },
+	{ AR5K_PHY_DESIRED_SIZE,
+	   { 0x0c28b4e0, 0x0c28b4e0, 0x0c28b4e0 } },
 	{ AR5K_PHY_SIG,
-	   { 0x7e800d2e, 0x7e800d2e, 0x7ec00d2e, 0x7e800d2e } },
+	   { 0x7e800d2e, 0x7ec00d2e, 0x7e800d2e } },
 	{ AR5K_PHY_AGCCOARSE,
-	   { 0x31375d5e, 0x31375d5e, 0x313a5d5e, 0x31375d5e } },
+	   { 0x31375d5e, 0x313a5d5e, 0x31375d5e } },
 	{ AR5K_PHY_AGCCTL,
-	   { 0x0000bd10, 0x0000bd10, 0x0000bd38, 0x0000bd10 } },
+	   { 0x0000bd10, 0x0000bd38, 0x0000bd10 } },
 	{ AR5K_PHY_NF,
-	   { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
+	   { 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
 	{ AR5K_PHY_RX_DELAY,
-	   { 0x00002710, 0x00002710, 0x0000157c, 0x00002710 } },
+	   { 0x00002710, 0x0000157c, 0x00002710 } },
 	{ AR5K_PHY(70),
-	   { 0x00000190, 0x00000190, 0x00000084, 0x00000190 } },
+	   { 0x00000190, 0x00000084, 0x00000190 } },
 	{ AR5K_PHY_FRAME_CTL_5211,
-	   { 0x6fe01020, 0x6fe01020, 0x6fe00920, 0x6fe01020 } },
+	   { 0x6fe01020, 0x6fe00920, 0x6fe01020 } },
 	{ AR5K_PHY_PCDAC_TXPOWER_BASE,
-	   { 0x05ff14ff, 0x05ff14ff, 0x05ff14ff, 0x05ff19ff } },
+	   { 0x05ff14ff, 0x05ff14ff, 0x05ff19ff } },
 	{ AR5K_RF_BUFFER_CONTROL_4,
-	   { 0x00000010, 0x00000014, 0x00000010, 0x00000010 } },
+	   { 0x00000010, 0x00000010, 0x00000010 } },
 };
 
 /* Initial register settings for AR5212 */
@@ -677,89 +675,87 @@ static const struct ath5k_ini ar5212_ini_common_start[] = {
 /* Initial mode-specific settings for AR5212 (Written before ar5212_ini) */
 static const struct ath5k_ini_mode ar5212_ini_mode_start[] = {
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(0),
-	/*	a/XR	   aTurbo	  b	   g (DYN)     gTurbo     */
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+	/*	A/XR          B           G       */
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(1),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(2),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(3),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(4),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(5),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(6),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(7),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(8),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_QUEUE_DFS_LOCAL_IFS(9),
-	   { 0x002ffc0f, 0x002ffc0f, 0x002ffc1f, 0x002ffc0f, 0x002ffc0f } },
+	   { 0x002ffc0f, 0x002ffc1f, 0x002ffc0f } },
 	{ AR5K_DCU_GBL_IFS_SIFS,
-	   { 0x00000230, 0x000001e0, 0x000000b0, 0x00000160, 0x000001e0 } },
+	   { 0x00000230, 0x000000b0, 0x00000160 } },
 	{ AR5K_DCU_GBL_IFS_SLOT,
-	   { 0x00000168, 0x000001e0, 0x000001b8, 0x0000018c, 0x000001e0 } },
+	   { 0x00000168, 0x000001b8, 0x0000018c } },
 	{ AR5K_DCU_GBL_IFS_EIFS,
-	   { 0x00000e60, 0x00001180, 0x00001f1c, 0x00003e38, 0x00001180 } },
+	   { 0x00000e60, 0x00001f1c, 0x00003e38 } },
 	{ AR5K_DCU_GBL_IFS_MISC,
-	   { 0x0000a0e0, 0x00014068, 0x00005880, 0x0000b0e0, 0x00014068 } },
+	   { 0x0000a0e0, 0x00005880, 0x0000b0e0 } },
 	{ AR5K_TIME_OUT,
-	   { 0x03e803e8, 0x06e006e0, 0x04200420, 0x08400840, 0x06e006e0 } },
-	{ AR5K_PHY_TURBO,
-	   { 0x00000000, 0x00000003, 0x00000000, 0x00000000, 0x00000003 } },
+	   { 0x03e803e8, 0x04200420, 0x08400840 } },
 	{ AR5K_PHY(8),
-	   { 0x02020200, 0x02020200, 0x02010200, 0x02020200, 0x02020200 } },
+	   { 0x02020200, 0x02010200, 0x02020200 } },
 	{ AR5K_PHY_RF_CTL2,
-	   { 0x00000e0e, 0x00000e0e, 0x00000707, 0x00000e0e, 0x00000e0e } },
+	   { 0x00000e0e, 0x00000707, 0x00000e0e } },
 	{ AR5K_PHY_SETTLING,
-	   { 0x1372161c, 0x13721c25, 0x13721722, 0x137216a2, 0x13721c25 } },
+	   { 0x1372161c, 0x13721722, 0x137216a2 } },
 	{ AR5K_PHY_AGCCTL,
-	   { 0x00009d10, 0x00009d10, 0x00009d18, 0x00009d18, 0x00009d10 } },
+	   { 0x00009d10, 0x00009d18, 0x00009d18 } },
 	{ AR5K_PHY_NF,
-	   { 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
+	   { 0x0001ce00, 0x0001ce00, 0x0001ce00 } },
 	{ AR5K_PHY_WEAK_OFDM_HIGH_THR,
-	   { 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 } },
+	   { 0x409a4190, 0x409a4190, 0x409a4190 } },
 	{ AR5K_PHY(70),
-	   { 0x000001b8, 0x000001b8, 0x00000084, 0x00000108, 0x000001b8 } },
+	   { 0x000001b8, 0x00000084, 0x00000108 } },
 	{ AR5K_PHY_OFDM_SELFCORR,
-	   { 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05, 0x10058a05 } },
+	   { 0x10058a05, 0x10058a05, 0x10058a05 } },
 	{ 0xa230,
-	   { 0x00000000, 0x00000000, 0x00000000, 0x00000108, 0x00000000 } },
+	   { 0x00000000, 0x00000000, 0x00000108 } },
 };
 
 /* Initial mode-specific settings for AR5212 + RF5111 (Written after ar5212_ini) */
 static const struct ath5k_ini_mode rf5111_ini_mode_end[] = {
 	{ AR5K_TXCFG,
-	/*	a/XR	   aTurbo	  b	   g (DYN)     gTurbo     */
-	   { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } },
+	/*	A/XR          B           G       */
+	   { 0x00008015, 0x00008015, 0x00008015 } },
 	{ AR5K_USEC_5211,
-	   { 0x128d8fa7, 0x09880fcf, 0x04e00f95, 0x12e00fab, 0x09880fcf } },
+	   { 0x128d8fa7, 0x04e00f95, 0x12e00fab } },
 	{ AR5K_PHY_RF_CTL3,
-	   { 0x0a020001, 0x0a020001, 0x05010100, 0x0a020001, 0x0a020001 } },
+	   { 0x0a020001, 0x05010100, 0x0a020001 } },
 	{ AR5K_PHY_RF_CTL4,
-	   { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+	   { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
 	{ AR5K_PHY_PA_CTL,
-	   { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } },
+	   { 0x00000007, 0x0000000b, 0x0000000b } },
 	{ AR5K_PHY_GAIN,
-	   { 0x0018da5a, 0x0018da5a, 0x0018ca69, 0x0018ca69, 0x0018ca69 } },
+	   { 0x0018da5a, 0x0018ca69, 0x0018ca69 } },
 	{ AR5K_PHY_DESIRED_SIZE,
-	   { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
+	   { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
 	{ AR5K_PHY_SIG,
-	   { 0x7e800d2e, 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e, 0x7e800d2e } },
+	   { 0x7e800d2e, 0x7ee84d2e, 0x7ee84d2e } },
 	{ AR5K_PHY_AGCCOARSE,
-	   { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137615e } },
+	   { 0x3137665e, 0x3137665e, 0x3137665e } },
 	{ AR5K_PHY_WEAK_OFDM_LOW_THR,
-	   { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb080, 0x050cb080 } },
+	   { 0x050cb081, 0x050cb081, 0x050cb080 } },
 	{ AR5K_PHY_RX_DELAY,
-	   { 0x00002710, 0x00002710, 0x0000157c, 0x00002af8, 0x00002710 } },
+	   { 0x00002710, 0x0000157c, 0x00002af8 } },
 	{ AR5K_PHY_FRAME_CTL_5211,
-	   { 0xf7b81020, 0xf7b81020, 0xf7b80d20, 0xf7b81020, 0xf7b81020 } },
+	   { 0xf7b81020, 0xf7b80d20, 0xf7b81020 } },
 	{ AR5K_PHY_GAIN_2GHZ,
-	   { 0x642c416a, 0x642c416a, 0x6440416a, 0x6440416a, 0x6440416a } },
+	   { 0x642c416a, 0x6440416a, 0x6440416a } },
 	{ AR5K_PHY_CCK_RX_CTL_4,
-	   { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } },
+	   { 0x1883800a, 0x1873800a, 0x1883800a } },
 };
 
 static const struct ath5k_ini rf5111_ini_common_end[] = {
@@ -782,38 +778,38 @@ static const struct ath5k_ini rf5111_ini_common_end[] = {
 /* Initial mode-specific settings for AR5212 + RF5112 (Written after ar5212_ini) */
 static const struct ath5k_ini_mode rf5112_ini_mode_end[] = {
 	{ AR5K_TXCFG,
-	/*	a/XR	   aTurbo	  b	   g (DYN)     gTurbo     */
-	   { 0x00008015, 0x00008015, 0x00008015, 0x00008015, 0x00008015 } },
+	/*	A/XR          B           G       */
+	   { 0x00008015, 0x00008015, 0x00008015 } },
 	{ AR5K_USEC_5211,
-	   { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } },
+	   { 0x128d93a7, 0x04e01395, 0x12e013ab } },
 	{ AR5K_PHY_RF_CTL3,
-	   { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } },
+	   { 0x0a020001, 0x05020100, 0x0a020001 } },
 	{ AR5K_PHY_RF_CTL4,
-	   { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+	   { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
 	{ AR5K_PHY_PA_CTL,
-	   { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } },
+	   { 0x00000007, 0x0000000b, 0x0000000b } },
 	{ AR5K_PHY_GAIN,
-	   { 0x0018da6d, 0x0018da6d, 0x0018ca75, 0x0018ca75, 0x0018ca75 } },
+	   { 0x0018da6d, 0x0018ca75, 0x0018ca75 } },
 	{ AR5K_PHY_DESIRED_SIZE,
-	   { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
+	   { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b4e0 } },
 	{ AR5K_PHY_SIG,
-	   { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e, 0x7e800d2e } },
+	   { 0x7e800d2e, 0x7ee80d2e, 0x7ee80d2e } },
 	{ AR5K_PHY_AGCCOARSE,
-	   { 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e, 0x3137665e } },
+	   { 0x3137665e, 0x3137665e, 0x3137665e } },
 	{ AR5K_PHY_WEAK_OFDM_LOW_THR,
-	   { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } },
+	   { 0x050cb081, 0x050cb081, 0x050cb081 } },
 	{ AR5K_PHY_RX_DELAY,
-	   { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } },
+	   { 0x000007d0, 0x0000044c, 0x00000898 } },
 	{ AR5K_PHY_FRAME_CTL_5211,
-	   { 0xf7b81020, 0xf7b81020, 0xf7b80d10, 0xf7b81010, 0xf7b81010 } },
+	   { 0xf7b81020, 0xf7b80d10, 0xf7b81010 } },
 	{ AR5K_PHY_CCKTXCTL,
-	   { 0x00000000, 0x00000000, 0x00000008, 0x00000008, 0x00000008 } },
+	   { 0x00000000, 0x00000008, 0x00000008 } },
 	{ AR5K_PHY_CCK_CROSSCORR,
-	   { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+	   { 0xd6be6788, 0xd03e6788, 0xd03e6788 } },
 	{ AR5K_PHY_GAIN_2GHZ,
-	   { 0x642c0140, 0x642c0140, 0x6442c160, 0x6442c160, 0x6442c160 } },
+	   { 0x642c0140, 0x6442c160, 0x6442c160 } },
 	{ AR5K_PHY_CCK_RX_CTL_4,
-	   { 0x1883800a, 0x1883800a, 0x1873800a, 0x1883800a, 0x1883800a } },
+	   { 0x1883800a, 0x1873800a, 0x1883800a } },
 };
 
 static const struct ath5k_ini rf5112_ini_common_end[] = {
@@ -833,66 +829,66 @@ static const struct ath5k_ini rf5112_ini_common_end[] = {
 /* Initial mode-specific settings for RF5413/5414 (Written after ar5212_ini) */
 static const struct ath5k_ini_mode rf5413_ini_mode_end[] = {
 	{ AR5K_TXCFG,
-	/*	a/XR	   aTurbo	  b	   g (DYN)     gTurbo     */
-	   { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } },
+	/*	A/XR          B           G       */
+	   { 0x00000015, 0x00000015, 0x00000015 } },
 	{ AR5K_USEC_5211,
-	   { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } },
+	   { 0x128d93a7, 0x04e01395, 0x12e013ab } },
 	{ AR5K_PHY_RF_CTL3,
-	   { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } },
+	   { 0x0a020001, 0x05020100, 0x0a020001 } },
 	{ AR5K_PHY_RF_CTL4,
-	   { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+	   { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
 	{ AR5K_PHY_PA_CTL,
-	   { 0x00000007, 0x00000007, 0x0000000b, 0x0000000b, 0x0000000b } },
+	   { 0x00000007, 0x0000000b, 0x0000000b } },
 	{ AR5K_PHY_GAIN,
-	   { 0x0018fa61, 0x0018fa61, 0x001a1a63, 0x001a1a63, 0x001a1a63 } },
+	   { 0x0018fa61, 0x001a1a63, 0x001a1a63 } },
 	{ AR5K_PHY_DESIRED_SIZE,
-	   { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } },
+	   { 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da } },
 	{ AR5K_PHY_SIG,
-	   { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } },
+	   { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } },
 	{ AR5K_PHY_AGCCOARSE,
-	   { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } },
+	   { 0x3139605e, 0x3139605e, 0x3139605e } },
 	{ AR5K_PHY_WEAK_OFDM_LOW_THR,
-	   { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } },
+	   { 0x050cb081, 0x050cb081, 0x050cb081 } },
 	{ AR5K_PHY_RX_DELAY,
-	   { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } },
+	   { 0x000007d0, 0x0000044c, 0x00000898 } },
 	{ AR5K_PHY_FRAME_CTL_5211,
-	   { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } },
+	   { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } },
 	{ AR5K_PHY_CCKTXCTL,
-	   { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+	   { 0x00000000, 0x00000000, 0x00000000 } },
 	{ AR5K_PHY_CCK_CROSSCORR,
-	   { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+	   { 0xd6be6788, 0xd03e6788, 0xd03e6788 } },
 	{ AR5K_PHY_GAIN_2GHZ,
-	   { 0x002ec1e0, 0x002ec1e0, 0x002ac120, 0x002ac120, 0x002ac120 } },
+	   { 0x002ec1e0, 0x002ac120, 0x002ac120 } },
 	{ AR5K_PHY_CCK_RX_CTL_4,
-	   { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } },
+	   { 0x1883800a, 0x1863800a, 0x1883800a } },
 	{ 0xa300,
-	   { 0x18010000, 0x18010000, 0x18010000, 0x18010000, 0x18010000 } },
+	   { 0x18010000, 0x18010000, 0x18010000 } },
 	{ 0xa304,
-	   { 0x30032602, 0x30032602, 0x30032602, 0x30032602, 0x30032602 } },
+	   { 0x30032602, 0x30032602, 0x30032602 } },
 	{ 0xa308,
-	   { 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06, 0x48073e06 } },
+	   { 0x48073e06, 0x48073e06, 0x48073e06 } },
 	{ 0xa30c,
-	   { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } },
+	   { 0x560b4c0a, 0x560b4c0a, 0x560b4c0a } },
 	{ 0xa310,
-	   { 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f, 0x641a600f } },
+	   { 0x641a600f, 0x641a600f, 0x641a600f } },
 	{ 0xa314,
-	   { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } },
+	   { 0x784f6e1b, 0x784f6e1b, 0x784f6e1b } },
 	{ 0xa318,
-	   { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } },
+	   { 0x868f7c5a, 0x868f7c5a, 0x868f7c5a } },
 	{ 0xa31c,
-	   { 0x90cf865b, 0x90cf865b, 0x8ecf865b, 0x8ecf865b, 0x8ecf865b } },
+	   { 0x90cf865b, 0x8ecf865b, 0x8ecf865b } },
 	{ 0xa320,
-	   { 0x9d4f970f, 0x9d4f970f, 0x9b4f970f, 0x9b4f970f, 0x9b4f970f } },
+	   { 0x9d4f970f, 0x9b4f970f, 0x9b4f970f } },
 	{ 0xa324,
-	   { 0xa7cfa38f, 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f, 0xa3cf9f8f } },
+	   { 0xa7cfa38f, 0xa3cf9f8f, 0xa3cf9f8f } },
 	{ 0xa328,
-	   { 0xb55faf1f, 0xb55faf1f, 0xb35faf1f, 0xb35faf1f, 0xb35faf1f } },
+	   { 0xb55faf1f, 0xb35faf1f, 0xb35faf1f } },
 	{ 0xa32c,
-	   { 0xbddfb99f, 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f, 0xbbdfb99f } },
+	   { 0xbddfb99f, 0xbbdfb99f, 0xbbdfb99f } },
 	{ 0xa330,
-	   { 0xcb7fc53f, 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f, 0xcb7fc73f } },
+	   { 0xcb7fc53f, 0xcb7fc73f, 0xcb7fc73f } },
 	{ 0xa334,
-	   { 0xd5ffd1bf, 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } },
+	   { 0xd5ffd1bf, 0xd3ffd1bf, 0xd3ffd1bf } },
 };
 
 static const struct ath5k_ini rf5413_ini_common_end[] = {
@@ -972,38 +968,38 @@ static const struct ath5k_ini rf5413_ini_common_end[] = {
 /* XXX: a mode ? */
 static const struct ath5k_ini_mode rf2413_ini_mode_end[] = {
 	{ AR5K_TXCFG,
-	/*	a/XR	   aTurbo	  b	   g (DYN)     gTurbo     */
-	   { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } },
+	/*	A/XR          B           G       */
+	   { 0x00000015, 0x00000015, 0x00000015 } },
 	{ AR5K_USEC_5211,
-	   { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } },
+	   { 0x128d93a7, 0x04e01395, 0x12e013ab } },
 	{ AR5K_PHY_RF_CTL3,
-	   { 0x0a020001, 0x0a020001, 0x05020000, 0x0a020001, 0x0a020001 } },
+	   { 0x0a020001, 0x05020000, 0x0a020001 } },
 	{ AR5K_PHY_RF_CTL4,
-	   { 0x00000e00, 0x00000e00, 0x00000e00, 0x00000e00, 0x00000e00 } },
+	   { 0x00000e00, 0x00000e00, 0x00000e00 } },
 	{ AR5K_PHY_PA_CTL,
-	   { 0x00000002, 0x00000002, 0x0000000a, 0x0000000a, 0x0000000a } },
+	   { 0x00000002, 0x0000000a, 0x0000000a } },
 	{ AR5K_PHY_GAIN,
-	   { 0x0018da6d, 0x0018da6d, 0x001a6a64, 0x001a6a64, 0x001a6a64 } },
+	   { 0x0018da6d, 0x001a6a64, 0x001a6a64 } },
 	{ AR5K_PHY_DESIRED_SIZE,
-	   { 0x0de8b4e0, 0x0de8b4e0, 0x0de8b0da, 0x0c98b0da, 0x0de8b0da } },
+	   { 0x0de8b4e0, 0x0de8b0da, 0x0c98b0da } },
 	{ AR5K_PHY_SIG,
-	   { 0x7e800d2e, 0x7e800d2e, 0x7ee80d2e, 0x7ec80d2e, 0x7e800d2e } },
+	   { 0x7e800d2e, 0x7ee80d2e, 0x7ec80d2e } },
 	{ AR5K_PHY_AGCCOARSE,
-	   { 0x3137665e, 0x3137665e, 0x3137665e, 0x3139605e, 0x3137665e } },
+	   { 0x3137665e, 0x3137665e, 0x3139605e } },
 	{ AR5K_PHY_WEAK_OFDM_LOW_THR,
-	   { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } },
+	   { 0x050cb081, 0x050cb081, 0x050cb081 } },
 	{ AR5K_PHY_RX_DELAY,
-	   { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } },
+	   { 0x000007d0, 0x0000044c, 0x00000898 } },
 	{ AR5K_PHY_FRAME_CTL_5211,
-	   { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } },
+	   { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } },
 	{ AR5K_PHY_CCKTXCTL,
-	   { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+	   { 0x00000000, 0x00000000, 0x00000000 } },
 	{ AR5K_PHY_CCK_CROSSCORR,
-	   { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+	   { 0xd6be6788, 0xd03e6788, 0xd03e6788 } },
 	{ AR5K_PHY_GAIN_2GHZ,
-	   { 0x002c0140, 0x002c0140, 0x0042c140, 0x0042c140, 0x0042c140 } },
+	   { 0x002c0140, 0x0042c140, 0x0042c140 } },
 	{ AR5K_PHY_CCK_RX_CTL_4,
-	   { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } },
+	   { 0x1883800a, 0x1863800a, 0x1883800a } },
 };
 
 static const struct ath5k_ini rf2413_ini_common_end[] = {
@@ -1094,52 +1090,50 @@ static const struct ath5k_ini rf2413_ini_common_end[] = {
 /* XXX: a mode ? */
 static const struct ath5k_ini_mode rf2425_ini_mode_end[] = {
 	{ AR5K_TXCFG,
-	/*	a/XR	   aTurbo	  b	   g (DYN)     gTurbo     */
-	   { 0x00000015, 0x00000015, 0x00000015, 0x00000015, 0x00000015 } },
+	/*	A/XR          B           G       */
+	   { 0x00000015, 0x00000015, 0x00000015 } },
 	{ AR5K_USEC_5211,
-	   { 0x128d93a7, 0x098813cf, 0x04e01395, 0x12e013ab, 0x098813cf } },
-	{ AR5K_PHY_TURBO,
-	   { 0x00000000, 0x00000001, 0x00000000, 0x00000000, 0x00000001 } },
+	   { 0x128d93a7, 0x04e01395, 0x12e013ab } },
 	{ AR5K_PHY_RF_CTL3,
-	   { 0x0a020001, 0x0a020001, 0x05020100, 0x0a020001, 0x0a020001 } },
+	   { 0x0a020001, 0x05020100, 0x0a020001 } },
 	{ AR5K_PHY_RF_CTL4,
-	   { 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e } },
+	   { 0x00000e0e, 0x00000e0e, 0x00000e0e } },
 	{ AR5K_PHY_PA_CTL,
-	   { 0x00000003, 0x00000003, 0x0000000b, 0x0000000b, 0x0000000b } },
+	   { 0x00000003, 0x0000000b, 0x0000000b } },
 	{ AR5K_PHY_SETTLING,
-	   { 0x1372161c, 0x13721c25, 0x13721722, 0x13721422, 0x13721c25 } },
+	   { 0x1372161c, 0x13721722, 0x13721422 } },
 	{ AR5K_PHY_GAIN,
-	   { 0x0018fa61, 0x0018fa61, 0x00199a65, 0x00199a65, 0x00199a65 } },
+	   { 0x0018fa61, 0x00199a65, 0x00199a65 } },
 	{ AR5K_PHY_DESIRED_SIZE,
-	   { 0x0c98b4e0, 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da, 0x0c98b0da } },
+	   { 0x0c98b4e0, 0x0c98b0da, 0x0c98b0da } },
 	{ AR5K_PHY_SIG,
-	   { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } },
+	   { 0x7ec80d2e, 0x7ec80d2e, 0x7ec80d2e } },
 	{ AR5K_PHY_AGCCOARSE,
-	   { 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e, 0x3139605e } },
+	   { 0x3139605e, 0x3139605e, 0x3139605e } },
 	{ AR5K_PHY_WEAK_OFDM_LOW_THR,
-	   { 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 } },
+	   { 0x050cb081, 0x050cb081, 0x050cb081 } },
 	{ AR5K_PHY_RX_DELAY,
-	   { 0x000007d0, 0x000007d0, 0x0000044c, 0x00000898, 0x000007d0 } },
+	   { 0x000007d0, 0x0000044c, 0x00000898 } },
 	{ AR5K_PHY_FRAME_CTL_5211,
-	   { 0xf7b81000, 0xf7b81000, 0xf7b80d00, 0xf7b81000, 0xf7b81000 } },
+	   { 0xf7b81000, 0xf7b80d00, 0xf7b81000 } },
 	{ AR5K_PHY_CCKTXCTL,
-	   { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
+	   { 0x00000000, 0x00000000, 0x00000000 } },
 	{ AR5K_PHY_CCK_CROSSCORR,
-	   { 0xd6be6788, 0xd6be6788, 0xd03e6788, 0xd03e6788, 0xd03e6788 } },
+	   { 0xd6be6788, 0xd03e6788, 0xd03e6788 } },
 	{ AR5K_PHY_GAIN_2GHZ,
-	   { 0x00000140, 0x00000140, 0x0052c140, 0x0052c140, 0x0052c140 } },
+	   { 0x00000140, 0x0052c140, 0x0052c140 } },
 	{ AR5K_PHY_CCK_RX_CTL_4,
-	   { 0x1883800a, 0x1883800a, 0x1863800a, 0x1883800a, 0x1883800a } },
+	   { 0x1883800a, 0x1863800a, 0x1883800a } },
 	{ 0xa324,
-	   { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+	   { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
 	{ 0xa328,
-	   { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+	   { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
 	{ 0xa32c,
-	   { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+	   { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
 	{ 0xa330,
-	   { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+	   { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
 	{ 0xa334,
-	   { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
+	   { 0xa7cfa7cf, 0xa7cfa7cf, 0xa7cfa7cf } },
 };
 
 static const struct ath5k_ini rf2425_ini_common_end[] = {
@@ -1368,15 +1362,15 @@ static const struct ath5k_ini rf5112_ini_bbgain[] = {
  * Write initial register dump
  */
 static void ath5k_hw_ini_registers(struct ath5k_hw *ah, unsigned int size,
-		const struct ath5k_ini *ini_regs, bool change_channel)
+		const struct ath5k_ini *ini_regs, bool skip_pcu)
 {
 	unsigned int i;
 
 	/* Write initial registers */
 	for (i = 0; i < size; i++) {
-		/* On channel change there is
-		 * no need to mess with PCU */
-		if (change_channel &&
+		/* Skip PCU registers if
+		 * requested */
+		if (skip_pcu &&
 				ini_regs[i].ini_register >= AR5K_PCU_MIN &&
 				ini_regs[i].ini_register <= AR5K_PCU_MAX)
 			continue;
@@ -1409,7 +1403,7 @@ static void ath5k_hw_ini_mode_registers(struct ath5k_hw *ah,
 
 }
 
-int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
+int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool skip_pcu)
 {
 	/*
 	 * Write initial register settings
@@ -1427,7 +1421,7 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
 		 * Write initial settings common for all modes
 		 */
 		ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5212_ini_common_start),
-				ar5212_ini_common_start, change_channel);
+				ar5212_ini_common_start, skip_pcu);
 
 		/* Second set of mode-specific settings */
 		switch (ah->ah_radio) {
@@ -1439,12 +1433,12 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
 
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf5111_ini_common_end),
-					rf5111_ini_common_end, change_channel);
+					rf5111_ini_common_end, skip_pcu);
 
 			/* Baseband gain table */
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf5111_ini_bbgain),
-					rf5111_ini_bbgain, change_channel);
+					rf5111_ini_bbgain, skip_pcu);
 
 			break;
 		case AR5K_RF5112:
@@ -1455,11 +1449,11 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
 
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf5112_ini_common_end),
-					rf5112_ini_common_end, change_channel);
+					rf5112_ini_common_end, skip_pcu);
 
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf5112_ini_bbgain),
-					rf5112_ini_bbgain, change_channel);
+					rf5112_ini_bbgain, skip_pcu);
 
 			break;
 		case AR5K_RF5413:
@@ -1470,11 +1464,11 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
 
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf5413_ini_common_end),
-					rf5413_ini_common_end, change_channel);
+					rf5413_ini_common_end, skip_pcu);
 
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf5112_ini_bbgain),
-					rf5112_ini_bbgain, change_channel);
+					rf5112_ini_bbgain, skip_pcu);
 
 			break;
 		case AR5K_RF2316:
@@ -1486,7 +1480,7 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
 
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf2413_ini_common_end),
-					rf2413_ini_common_end, change_channel);
+					rf2413_ini_common_end, skip_pcu);
 
 			/* Override settings from rf2413_ini_common_end */
 			if (ah->ah_radio == AR5K_RF2316) {
@@ -1498,9 +1492,32 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
 
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf5112_ini_bbgain),
-					rf5112_ini_bbgain, change_channel);
+					rf5112_ini_bbgain, skip_pcu);
 			break;
 		case AR5K_RF2317:
+
+			ath5k_hw_ini_mode_registers(ah,
+					ARRAY_SIZE(rf2413_ini_mode_end),
+					rf2413_ini_mode_end, mode);
+
+			ath5k_hw_ini_registers(ah,
+					ARRAY_SIZE(rf2425_ini_common_end),
+					rf2425_ini_common_end, skip_pcu);
+
+			/* Override settings from rf2413_ini_mode_end */
+			ath5k_hw_reg_write(ah, 0x00180a65, AR5K_PHY_GAIN);
+
+			/* Override settings from rf2413_ini_common_end */
+			ath5k_hw_reg_write(ah, 0x00004000, AR5K_PHY_AGC);
+			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TPC_RG5,
+				AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP, 0xa);
+			ath5k_hw_reg_write(ah, 0x800000a8, 0x8140);
+			ath5k_hw_reg_write(ah, 0x000000ff, 0x9958);
+
+			ath5k_hw_ini_registers(ah,
+					ARRAY_SIZE(rf5112_ini_bbgain),
+					rf5112_ini_bbgain, skip_pcu);
+			break;
 		case AR5K_RF2425:
 
 			ath5k_hw_ini_mode_registers(ah,
@@ -1509,11 +1526,11 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
 
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf2425_ini_common_end),
-					rf2425_ini_common_end, change_channel);
+					rf2425_ini_common_end, skip_pcu);
 
 			ath5k_hw_ini_registers(ah,
 					ARRAY_SIZE(rf5112_ini_bbgain),
-					rf5112_ini_bbgain, change_channel);
+					rf5112_ini_bbgain, skip_pcu);
 			break;
 		default:
 			return -EINVAL;
@@ -1538,17 +1555,17 @@ int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel)
 		 * Write initial settings common for all modes
 		 */
 		ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5211_ini),
-				ar5211_ini, change_channel);
+				ar5211_ini, skip_pcu);
 
 		/* AR5211 only comes with 5111 */
 
 		/* Baseband gain table */
 		ath5k_hw_ini_registers(ah, ARRAY_SIZE(rf5111_ini_bbgain),
-				rf5111_ini_bbgain, change_channel);
+				rf5111_ini_bbgain, skip_pcu);
 	/* For AR5210 (for mode settings check out ath5k_hw_reset_tx_queue) */
 	} else if (ah->ah_version == AR5K_AR5210) {
 		ath5k_hw_ini_registers(ah, ARRAY_SIZE(ar5210_ini),
-				ar5210_ini, change_channel);
+				ar5210_ini, skip_pcu);
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c
index 67aa52e9bf9..576edf2965d 100644
--- a/drivers/net/wireless/ath/ath5k/led.c
+++ b/drivers/net/wireless/ath/ath5k/led.c
@@ -133,7 +133,7 @@ ath5k_register_led(struct ath5k_softc *sc, struct ath5k_led *led,
 	led->led_dev.default_trigger = trigger;
 	led->led_dev.brightness_set = ath5k_led_brightness_set;
 
-	err = led_classdev_register(&sc->pdev->dev, &led->led_dev);
+	err = led_classdev_register(sc->dev, &led->led_dev);
 	if (err) {
 		ATH5K_WARN(sc, "could not register LED %s\n", name);
 		led->sc = NULL;
@@ -161,11 +161,20 @@ int ath5k_init_leds(struct ath5k_softc *sc)
 {
 	int ret = 0;
 	struct ieee80211_hw *hw = sc->hw;
+#ifndef CONFIG_ATHEROS_AR231X
 	struct pci_dev *pdev = sc->pdev;
+#endif
 	char name[ATH5K_LED_MAX_NAME_LEN + 1];
 	const struct pci_device_id *match;
 
+	if (!sc->pdev)
+		return 0;
+
+#ifdef CONFIG_ATHEROS_AR231X
+	match = NULL;
+#else
 	match = pci_match_id(&ath5k_led_devices[0], pdev);
+#endif
 	if (match) {
 		__set_bit(ATH_STAT_LEDSOFT, sc->status);
 		sc->led_pin = ATH_PIN(match->driver_data);
diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
new file mode 100644
index 00000000000..d76d68c99f7
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c
@@ -0,0 +1,774 @@
+/*-
+ * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
+ * Copyright (c) 2004-2005 Atheros Communications, Inc.
+ * Copyright (c) 2006 Devicescape Software, Inc.
+ * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2010 Bruno Randolf <br1@einfach.org>
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+ *    redistribution must be conditioned upon including a substantially
+ *    similar Disclaimer requirement for further binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include <asm/unaligned.h>
+
+#include "base.h"
+#include "reg.h"
+
+extern int ath5k_modparam_nohwcrypt;
+
+/* functions used from base.c */
+void set_beacon_filter(struct ieee80211_hw *hw, bool enable);
+bool ath_any_vif_assoc(struct ath5k_softc *sc);
+int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
+		   struct ath5k_txq *txq);
+int ath5k_init_hw(struct ath5k_softc *sc);
+int ath5k_stop_hw(struct ath5k_softc *sc);
+void ath5k_mode_setup(struct ath5k_softc *sc, struct ieee80211_vif *vif);
+void ath5k_update_bssid_mask_and_opmode(struct ath5k_softc *sc,
+					struct ieee80211_vif *vif);
+int ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan);
+void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
+int ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+void ath5k_beacon_config(struct ath5k_softc *sc);
+void ath5k_txbuf_free_skb(struct ath5k_softc *sc, struct ath5k_buf *bf);
+void ath5k_rxbuf_free_skb(struct ath5k_softc *sc, struct ath5k_buf *bf);
+
+/********************\
+* Mac80211 functions *
+\********************/
+
+static int
+ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct ath5k_softc *sc = hw->priv;
+	u16 qnum = skb_get_queue_mapping(skb);
+
+	if (WARN_ON(qnum >= sc->ah->ah_capabilities.cap_queues.q_tx_num)) {
+		dev_kfree_skb_any(skb);
+		return 0;
+	}
+
+	return ath5k_tx_queue(hw, skb, &sc->txqs[qnum]);
+}
+
+
+static int
+ath5k_start(struct ieee80211_hw *hw)
+{
+	return ath5k_init_hw(hw->priv);
+}
+
+
+static void
+ath5k_stop(struct ieee80211_hw *hw)
+{
+	ath5k_stop_hw(hw->priv);
+}
+
+
+static int
+ath5k_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
+{
+	struct ath5k_softc *sc = hw->priv;
+	int ret;
+	struct ath5k_vif *avf = (void *)vif->drv_priv;
+
+	mutex_lock(&sc->lock);
+
+	if ((vif->type == NL80211_IFTYPE_AP ||
+	     vif->type == NL80211_IFTYPE_ADHOC)
+	    && (sc->num_ap_vifs + sc->num_adhoc_vifs) >= ATH_BCBUF) {
+		ret = -ELNRNG;
+		goto end;
+	}
+
+	/* Don't allow other interfaces if one ad-hoc is configured.
+	 * TODO: Fix the problems with ad-hoc and multiple other interfaces.
+	 * We would need to operate the HW in ad-hoc mode to allow TSF updates
+	 * for the IBSS, but this breaks with additional AP or STA interfaces
+	 * at the moment. */
+	if (sc->num_adhoc_vifs ||
+	    (sc->nvifs && vif->type == NL80211_IFTYPE_ADHOC)) {
+		ATH5K_ERR(sc, "Only one single ad-hoc interface is allowed.\n");
+		ret = -ELNRNG;
+		goto end;
+	}
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_MESH_POINT:
+		avf->opmode = vif->type;
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		goto end;
+	}
+
+	sc->nvifs++;
+	ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", avf->opmode);
+
+	/* Assign the vap/adhoc to a beacon xmit slot. */
+	if ((avf->opmode == NL80211_IFTYPE_AP) ||
+	    (avf->opmode == NL80211_IFTYPE_ADHOC) ||
+	    (avf->opmode == NL80211_IFTYPE_MESH_POINT)) {
+		int slot;
+
+		WARN_ON(list_empty(&sc->bcbuf));
+		avf->bbuf = list_first_entry(&sc->bcbuf, struct ath5k_buf,
+					     list);
+		list_del(&avf->bbuf->list);
+
+		avf->bslot = 0;
+		for (slot = 0; slot < ATH_BCBUF; slot++) {
+			if (!sc->bslot[slot]) {
+				avf->bslot = slot;
+				break;
+			}
+		}
+		BUG_ON(sc->bslot[avf->bslot] != NULL);
+		sc->bslot[avf->bslot] = vif;
+		if (avf->opmode == NL80211_IFTYPE_AP)
+			sc->num_ap_vifs++;
+		else if (avf->opmode == NL80211_IFTYPE_ADHOC)
+			sc->num_adhoc_vifs++;
+	}
+
+	/* Any MAC address is fine, all others are included through the
+	 * filter.
+	 */
+	memcpy(&sc->lladdr, vif->addr, ETH_ALEN);
+	ath5k_hw_set_lladdr(sc->ah, vif->addr);
+
+	memcpy(&avf->lladdr, vif->addr, ETH_ALEN);
+
+	ath5k_mode_setup(sc, vif);
+
+	ret = 0;
+end:
+	mutex_unlock(&sc->lock);
+	return ret;
+}
+
+
+static void
+ath5k_remove_interface(struct ieee80211_hw *hw,
+		       struct ieee80211_vif *vif)
+{
+	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_vif *avf = (void *)vif->drv_priv;
+	unsigned int i;
+
+	mutex_lock(&sc->lock);
+	sc->nvifs--;
+
+	if (avf->bbuf) {
+		ath5k_txbuf_free_skb(sc, avf->bbuf);
+		list_add_tail(&avf->bbuf->list, &sc->bcbuf);
+		for (i = 0; i < ATH_BCBUF; i++) {
+			if (sc->bslot[i] == vif) {
+				sc->bslot[i] = NULL;
+				break;
+			}
+		}
+		avf->bbuf = NULL;
+	}
+	if (avf->opmode == NL80211_IFTYPE_AP)
+		sc->num_ap_vifs--;
+	else if (avf->opmode == NL80211_IFTYPE_ADHOC)
+		sc->num_adhoc_vifs--;
+
+	ath5k_update_bssid_mask_and_opmode(sc, NULL);
+	mutex_unlock(&sc->lock);
+}
+
+
+/*
+ * TODO: Phy disable/diversity etc
+ */
+static int
+ath5k_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
+	struct ieee80211_conf *conf = &hw->conf;
+	int ret = 0;
+
+	mutex_lock(&sc->lock);
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		ret = ath5k_chan_set(sc, conf->channel);
+		if (ret < 0)
+			goto unlock;
+	}
+
+	if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
+	(sc->power_level != conf->power_level)) {
+		sc->power_level = conf->power_level;
+
+		/* Half dB steps */
+		ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
+	}
+
+	/* TODO:
+	 * 1) Move this on config_interface and handle each case
+	 * separately eg. when we have only one STA vif, use
+	 * AR5K_ANTMODE_SINGLE_AP
+	 *
+	 * 2) Allow the user to change antenna mode eg. when only
+	 * one antenna is present
+	 *
+	 * 3) Allow the user to set default/tx antenna when possible
+	 *
+	 * 4) Default mode should handle 90% of the cases, together
+	 * with fixed a/b and single AP modes we should be able to
+	 * handle 99%. Sectored modes are extreme cases and i still
+	 * haven't found a usage for them. If we decide to support them,
+	 * then we must allow the user to set how many tx antennas we
+	 * have available
+	 */
+	ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
+
+unlock:
+	mutex_unlock(&sc->lock);
+	return ret;
+}
+
+
+static void
+ath5k_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		       struct ieee80211_bss_conf *bss_conf, u32 changes)
+{
+	struct ath5k_vif *avf = (void *)vif->drv_priv;
+	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
+	unsigned long flags;
+
+	mutex_lock(&sc->lock);
+
+	if (changes & BSS_CHANGED_BSSID) {
+		/* Cache for later use during resets */
+		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
+		common->curaid = 0;
+		ath5k_hw_set_bssid(ah);
+		mmiowb();
+	}
+
+	if (changes & BSS_CHANGED_BEACON_INT)
+		sc->bintval = bss_conf->beacon_int;
+
+	if (changes & BSS_CHANGED_ASSOC) {
+		avf->assoc = bss_conf->assoc;
+		if (bss_conf->assoc)
+			sc->assoc = bss_conf->assoc;
+		else
+			sc->assoc = ath_any_vif_assoc(sc);
+
+		if (sc->opmode == NL80211_IFTYPE_STATION)
+			set_beacon_filter(hw, sc->assoc);
+		ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
+			AR5K_LED_ASSOC : AR5K_LED_INIT);
+		if (bss_conf->assoc) {
+			ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
+				  "Bss Info ASSOC %d, bssid: %pM\n",
+				  bss_conf->aid, common->curbssid);
+			common->curaid = bss_conf->aid;
+			ath5k_hw_set_bssid(ah);
+			/* Once ANI is available you would start it here */
+		}
+	}
+
+	if (changes & BSS_CHANGED_BEACON) {
+		spin_lock_irqsave(&sc->block, flags);
+		ath5k_beacon_update(hw, vif);
+		spin_unlock_irqrestore(&sc->block, flags);
+	}
+
+	if (changes & BSS_CHANGED_BEACON_ENABLED)
+		sc->enable_beacon = bss_conf->enable_beacon;
+
+	if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED |
+		       BSS_CHANGED_BEACON_INT))
+		ath5k_beacon_config(sc);
+
+	mutex_unlock(&sc->lock);
+}
+
+
+static u64
+ath5k_prepare_multicast(struct ieee80211_hw *hw,
+			struct netdev_hw_addr_list *mc_list)
+{
+	u32 mfilt[2], val;
+	u8 pos;
+	struct netdev_hw_addr *ha;
+
+	mfilt[0] = 0;
+	mfilt[1] = 1;
+
+	netdev_hw_addr_list_for_each(ha, mc_list) {
+		/* calculate XOR of eight 6-bit values */
+		val = get_unaligned_le32(ha->addr + 0);
+		pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
+		val = get_unaligned_le32(ha->addr + 3);
+		pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
+		pos &= 0x3f;
+		mfilt[pos / 32] |= (1 << (pos % 32));
+		/* XXX: we might be able to just do this instead,
+		* but not sure, needs testing, if we do use this we'd
+		* neet to inform below to not reset the mcast */
+		/* ath5k_hw_set_mcast_filterindex(ah,
+		 *      ha->addr[5]); */
+	}
+
+	return ((u64)(mfilt[1]) << 32) | mfilt[0];
+}
+
+
+/*
+ * o always accept unicast, broadcast, and multicast traffic
+ * o multicast traffic for all BSSIDs will be enabled if mac80211
+ *   says it should be
+ * o maintain current state of phy ofdm or phy cck error reception.
+ *   If the hardware detects any of these type of errors then
+ *   ath5k_hw_get_rx_filter() will pass to us the respective
+ *   hardware filters to be able to receive these type of frames.
+ * o probe request frames are accepted only when operating in
+ *   hostap, adhoc, or monitor modes
+ * o enable promiscuous mode according to the interface state
+ * o accept beacons:
+ *   - when operating in adhoc mode so the 802.11 layer creates
+ *     node table entries for peers,
+ *   - when operating in station mode for collecting rssi data when
+ *     the station is otherwise quiet, or
+ *   - when scanning
+ */
+static void
+ath5k_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
+		       unsigned int *new_flags, u64 multicast)
+{
+#define SUPPORTED_FIF_FLAGS \
+	(FIF_PROMISC_IN_BSS |  FIF_ALLMULTI | FIF_FCSFAIL | \
+	FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
+	FIF_BCN_PRBRESP_PROMISC)
+
+	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
+	u32 mfilt[2], rfilt;
+
+	mutex_lock(&sc->lock);
+
+	mfilt[0] = multicast;
+	mfilt[1] = multicast >> 32;
+
+	/* Only deal with supported flags */
+	changed_flags &= SUPPORTED_FIF_FLAGS;
+	*new_flags &= SUPPORTED_FIF_FLAGS;
+
+	/* If HW detects any phy or radar errors, leave those filters on.
+	 * Also, always enable Unicast, Broadcasts and Multicast
+	 * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
+	rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
+		(AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
+		AR5K_RX_FILTER_MCAST);
+
+	if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
+		if (*new_flags & FIF_PROMISC_IN_BSS)
+			__set_bit(ATH_STAT_PROMISC, sc->status);
+		else
+			__clear_bit(ATH_STAT_PROMISC, sc->status);
+	}
+
+	if (test_bit(ATH_STAT_PROMISC, sc->status))
+		rfilt |= AR5K_RX_FILTER_PROM;
+
+	/* Note, AR5K_RX_FILTER_MCAST is already enabled */
+	if (*new_flags & FIF_ALLMULTI) {
+		mfilt[0] =  ~0;
+		mfilt[1] =  ~0;
+	}
+
+	/* This is the best we can do */
+	if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
+		rfilt |= AR5K_RX_FILTER_PHYERR;
+
+	/* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
+	* and probes for any BSSID */
+	if ((*new_flags & FIF_BCN_PRBRESP_PROMISC) || (sc->nvifs > 1))
+		rfilt |= AR5K_RX_FILTER_BEACON;
+
+	/* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
+	 * set we should only pass on control frames for this
+	 * station. This needs testing. I believe right now this
+	 * enables *all* control frames, which is OK.. but
+	 * but we should see if we can improve on granularity */
+	if (*new_flags & FIF_CONTROL)
+		rfilt |= AR5K_RX_FILTER_CONTROL;
+
+	/* Additional settings per mode -- this is per ath5k */
+
+	/* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
+
+	switch (sc->opmode) {
+	case NL80211_IFTYPE_MESH_POINT:
+		rfilt |= AR5K_RX_FILTER_CONTROL |
+			 AR5K_RX_FILTER_BEACON |
+			 AR5K_RX_FILTER_PROBEREQ |
+			 AR5K_RX_FILTER_PROM;
+		break;
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_ADHOC:
+		rfilt |= AR5K_RX_FILTER_PROBEREQ |
+			 AR5K_RX_FILTER_BEACON;
+		break;
+	case NL80211_IFTYPE_STATION:
+		if (sc->assoc)
+			rfilt |= AR5K_RX_FILTER_BEACON;
+	default:
+		break;
+	}
+
+	/* Set filters */
+	ath5k_hw_set_rx_filter(ah, rfilt);
+
+	/* Set multicast bits */
+	ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
+	/* Set the cached hw filter flags, this will later actually
+	 * be set in HW */
+	sc->filter_flags = rfilt;
+
+	mutex_unlock(&sc->lock);
+}
+
+
+static int
+ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+	      struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+	      struct ieee80211_key_conf *key)
+{
+	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
+	int ret = 0;
+
+	if (ath5k_modparam_nohwcrypt)
+		return -EOPNOTSUPP;
+
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_WEP40:
+	case WLAN_CIPHER_SUITE_WEP104:
+	case WLAN_CIPHER_SUITE_TKIP:
+		break;
+	case WLAN_CIPHER_SUITE_CCMP:
+		if (common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM)
+			break;
+		return -EOPNOTSUPP;
+	default:
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	mutex_lock(&sc->lock);
+
+	switch (cmd) {
+	case SET_KEY:
+		ret = ath_key_config(common, vif, sta, key);
+		if (ret >= 0) {
+			key->hw_key_idx = ret;
+			/* push IV and Michael MIC generation to stack */
+			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+			if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
+				key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+			if (key->cipher == WLAN_CIPHER_SUITE_CCMP)
+				key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
+			ret = 0;
+		}
+		break;
+	case DISABLE_KEY:
+		ath_key_delete(common, key);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mmiowb();
+	mutex_unlock(&sc->lock);
+	return ret;
+}
+
+
+static void
+ath5k_sw_scan_start(struct ieee80211_hw *hw)
+{
+	struct ath5k_softc *sc = hw->priv;
+	if (!sc->assoc)
+		ath5k_hw_set_ledstate(sc->ah, AR5K_LED_SCAN);
+}
+
+
+static void
+ath5k_sw_scan_complete(struct ieee80211_hw *hw)
+{
+	struct ath5k_softc *sc = hw->priv;
+	ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
+		AR5K_LED_ASSOC : AR5K_LED_INIT);
+}
+
+
+static int
+ath5k_get_stats(struct ieee80211_hw *hw,
+		struct ieee80211_low_level_stats *stats)
+{
+	struct ath5k_softc *sc = hw->priv;
+
+	/* Force update */
+	ath5k_hw_update_mib_counters(sc->ah);
+
+	stats->dot11ACKFailureCount = sc->stats.ack_fail;
+	stats->dot11RTSFailureCount = sc->stats.rts_fail;
+	stats->dot11RTSSuccessCount = sc->stats.rts_ok;
+	stats->dot11FCSErrorCount = sc->stats.fcs_error;
+
+	return 0;
+}
+
+
+static int
+ath5k_conf_tx(struct ieee80211_hw *hw, u16 queue,
+	      const struct ieee80211_tx_queue_params *params)
+{
+	struct ath5k_softc *sc = hw->priv;
+	struct ath5k_hw *ah = sc->ah;
+	struct ath5k_txq_info qi;
+	int ret = 0;
+
+	if (queue >= ah->ah_capabilities.cap_queues.q_tx_num)
+		return 0;
+
+	mutex_lock(&sc->lock);
+
+	ath5k_hw_get_tx_queueprops(ah, queue, &qi);
+
+	qi.tqi_aifs = params->aifs;
+	qi.tqi_cw_min = params->cw_min;
+	qi.tqi_cw_max = params->cw_max;
+	qi.tqi_burst_time = params->txop;
+
+	ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
+		  "Configure tx [queue %d],  "
+		  "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
+		  queue, params->aifs, params->cw_min,
+		  params->cw_max, params->txop);
+
+	if (ath5k_hw_set_tx_queueprops(ah, queue, &qi)) {
+		ATH5K_ERR(sc,
+			  "Unable to update hardware queue %u!\n", queue);
+		ret = -EIO;
+	} else
+		ath5k_hw_reset_tx_queue(ah, queue);
+
+	mutex_unlock(&sc->lock);
+
+	return ret;
+}
+
+
+static u64
+ath5k_get_tsf(struct ieee80211_hw *hw)
+{
+	struct ath5k_softc *sc = hw->priv;
+
+	return ath5k_hw_get_tsf64(sc->ah);
+}
+
+
+static void
+ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
+{
+	struct ath5k_softc *sc = hw->priv;
+
+	ath5k_hw_set_tsf64(sc->ah, tsf);
+}
+
+
+static void
+ath5k_reset_tsf(struct ieee80211_hw *hw)
+{
+	struct ath5k_softc *sc = hw->priv;
+
+	/*
+	 * in IBSS mode we need to update the beacon timers too.
+	 * this will also reset the TSF if we call it with 0
+	 */
+	if (sc->opmode == NL80211_IFTYPE_ADHOC)
+		ath5k_beacon_update_timers(sc, 0);
+	else
+		ath5k_hw_reset_tsf(sc->ah);
+}
+
+
+static int
+ath5k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey)
+{
+	struct ath5k_softc *sc = hw->priv;
+	struct ieee80211_conf *conf = &hw->conf;
+	struct ath_common *common = ath5k_hw_common(sc->ah);
+	struct ath_cycle_counters *cc = &common->cc_survey;
+	unsigned int div = common->clockrate * 1000;
+
+	if (idx != 0)
+		return -ENOENT;
+
+	spin_lock_bh(&common->cc_lock);
+	ath_hw_cycle_counters_update(common);
+	if (cc->cycles > 0) {
+		sc->survey.channel_time += cc->cycles / div;
+		sc->survey.channel_time_busy += cc->rx_busy / div;
+		sc->survey.channel_time_rx += cc->rx_frame / div;
+		sc->survey.channel_time_tx += cc->tx_frame / div;
+	}
+	memset(cc, 0, sizeof(*cc));
+	spin_unlock_bh(&common->cc_lock);
+
+	memcpy(survey, &sc->survey, sizeof(*survey));
+
+	survey->channel = conf->channel;
+	survey->noise = sc->ah->ah_noise_floor;
+	survey->filled = SURVEY_INFO_NOISE_DBM |
+			SURVEY_INFO_CHANNEL_TIME |
+			SURVEY_INFO_CHANNEL_TIME_BUSY |
+			SURVEY_INFO_CHANNEL_TIME_RX |
+			SURVEY_INFO_CHANNEL_TIME_TX;
+
+	return 0;
+}
+
+
+/**
+ * ath5k_set_coverage_class - Set IEEE 802.11 coverage class
+ *
+ * @hw: struct ieee80211_hw pointer
+ * @coverage_class: IEEE 802.11 coverage class number
+ *
+ * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given
+ * coverage class. The values are persistent, they are restored after device
+ * reset.
+ */
+static void
+ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
+{
+	struct ath5k_softc *sc = hw->priv;
+
+	mutex_lock(&sc->lock);
+	ath5k_hw_set_coverage_class(sc->ah, coverage_class);
+	mutex_unlock(&sc->lock);
+}
+
+
+static int
+ath5k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant)
+{
+	struct ath5k_softc *sc = hw->priv;
+
+	if (tx_ant == 1 && rx_ant == 1)
+		ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_FIXED_A);
+	else if (tx_ant == 2 && rx_ant == 2)
+		ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_FIXED_B);
+	else if ((tx_ant & 3) == 3 && (rx_ant & 3) == 3)
+		ath5k_hw_set_antenna_mode(sc->ah, AR5K_ANTMODE_DEFAULT);
+	else
+		return -EINVAL;
+	return 0;
+}
+
+
+static int
+ath5k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant)
+{
+	struct ath5k_softc *sc = hw->priv;
+
+	switch (sc->ah->ah_ant_mode) {
+	case AR5K_ANTMODE_FIXED_A:
+		*tx_ant = 1; *rx_ant = 1; break;
+	case AR5K_ANTMODE_FIXED_B:
+		*tx_ant = 2; *rx_ant = 2; break;
+	case AR5K_ANTMODE_DEFAULT:
+		*tx_ant = 3; *rx_ant = 3; break;
+	}
+	return 0;
+}
+
+
+const struct ieee80211_ops ath5k_hw_ops = {
+	.tx			= ath5k_tx,
+	.start			= ath5k_start,
+	.stop			= ath5k_stop,
+	.add_interface		= ath5k_add_interface,
+	/* .change_interface	= not implemented */
+	.remove_interface	= ath5k_remove_interface,
+	.config			= ath5k_config,
+	.bss_info_changed	= ath5k_bss_info_changed,
+	.prepare_multicast	= ath5k_prepare_multicast,
+	.configure_filter	= ath5k_configure_filter,
+	/* .set_tim		= not implemented */
+	.set_key		= ath5k_set_key,
+	/* .update_tkip_key	= not implemented */
+	/* .hw_scan		= not implemented */
+	.sw_scan_start		= ath5k_sw_scan_start,
+	.sw_scan_complete	= ath5k_sw_scan_complete,
+	.get_stats		= ath5k_get_stats,
+	/* .get_tkip_seq	= not implemented */
+	/* .set_frag_threshold	= not implemented */
+	/* .set_rts_threshold	= not implemented */
+	/* .sta_add		= not implemented */
+	/* .sta_remove		= not implemented */
+	/* .sta_notify		= not implemented */
+	.conf_tx		= ath5k_conf_tx,
+	.get_tsf		= ath5k_get_tsf,
+	.set_tsf		= ath5k_set_tsf,
+	.reset_tsf		= ath5k_reset_tsf,
+	/* .tx_last_beacon	= not implemented */
+	/* .ampdu_action	= not needed */
+	.get_survey		= ath5k_get_survey,
+	.set_coverage_class	= ath5k_set_coverage_class,
+	/* .rfkill_poll		= not implemented */
+	/* .flush		= not implemented */
+	/* .channel_switch	= not implemented */
+	/* .napi_poll		= not implemented */
+	.set_antenna		= ath5k_set_antenna,
+	.get_antenna		= ath5k_get_antenna,
+};
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
new file mode 100644
index 00000000000..7f8c5b0e9d2
--- /dev/null
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/nl80211.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include "../ath.h"
+#include "ath5k.h"
+#include "debug.h"
+#include "base.h"
+#include "reg.h"
+
+/* Known PCI ids */
+static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
+	{ PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
+	{ PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
+	{ PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
+	{ PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
+	{ PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
+	{ PCI_VDEVICE(3COM_2,  0x0013) }, /* 3com 5212 */
+	{ PCI_VDEVICE(3COM,    0x0013) }, /* 3com 3CRDAG675 5212 */
+	{ PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
+	{ PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */
+	{ PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */
+	{ PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */
+	{ PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */
+	{ PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */
+	{ PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */
+	{ PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
+	{ PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
+	{ PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
+	{ PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
+
+/* return bus cachesize in 4B word units */
+static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
+{
+	struct ath5k_softc *sc = (struct ath5k_softc *) common->priv;
+	u8 u8tmp;
+
+	pci_read_config_byte(sc->pdev, PCI_CACHE_LINE_SIZE, &u8tmp);
+	*csz = (int)u8tmp;
+
+	/*
+	 * This check was put in to avoid "unplesant" consequences if
+	 * the bootrom has not fully initialized all PCI devices.
+	 * Sometimes the cache line size register is not set
+	 */
+
+	if (*csz == 0)
+		*csz = L1_CACHE_BYTES >> 2;   /* Use the default size */
+}
+
+/*
+ * Read from eeprom
+ */
+bool ath5k_pci_eeprom_read(struct ath_common *common, u32 offset, u16 *data)
+{
+	struct ath5k_hw *ah = (struct ath5k_hw *) common->ah;
+	u32 status, timeout;
+
+	/*
+	 * Initialize EEPROM access
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
+		(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
+	} else {
+		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
+				AR5K_EEPROM_CMD_READ);
+	}
+
+	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
+		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
+		if (status & AR5K_EEPROM_STAT_RDDONE) {
+			if (status & AR5K_EEPROM_STAT_RDERR)
+				return -EIO;
+			*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
+					0xffff);
+			return 0;
+		}
+		udelay(15);
+	}
+
+	return -ETIMEDOUT;
+}
+
+int ath5k_hw_read_srev(struct ath5k_hw *ah)
+{
+	ah->ah_mac_srev = ath5k_hw_reg_read(ah, AR5K_SREV);
+	return 0;
+}
+
+/* Common ath_bus_opts structure */
+static const struct ath_bus_ops ath_pci_bus_ops = {
+	.ath_bus_type = ATH_PCI,
+	.read_cachesize = ath5k_pci_read_cachesize,
+	.eeprom_read = ath5k_pci_eeprom_read,
+};
+
+/********************\
+* PCI Initialization *
+\********************/
+
+static int __devinit
+ath5k_pci_probe(struct pci_dev *pdev,
+		const struct pci_device_id *id)
+{
+	void __iomem *mem;
+	struct ath5k_softc *sc;
+	struct ieee80211_hw *hw;
+	int ret;
+	u8 csz;
+
+	/*
+	 * L0s needs to be disabled on all ath5k cards.
+	 *
+	 * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
+	 * by default in the future in 2.6.36) this will also mean both L1 and
+	 * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
+	 * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
+	 * though but cannot currently undue the effect of a blacklist, for
+	 * details you can read pcie_aspm_sanity_check() and see how it adjusts
+	 * the device link capability.
+	 *
+	 * It may be possible in the future to implement some PCI API to allow
+	 * drivers to override blacklists for pre 1.1 PCIe but for now it is
+	 * best to accept that both L0s and L1 will be disabled completely for
+	 * distributions shipping with CONFIG_PCIEASPM rather than having this
+	 * issue present. Motivation for adding this new API will be to help
+	 * with power consumption for some of these devices.
+	 */
+	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "can't enable device\n");
+		goto err;
+	}
+
+	/* XXX 32-bit addressing only */
+	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret) {
+		dev_err(&pdev->dev, "32-bit DMA not available\n");
+		goto err_dis;
+	}
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
+	if (csz == 0) {
+		/*
+		 * Linux 2.4.18 (at least) writes the cache line size
+		 * register as a 16-bit wide register which is wrong.
+		 * We must have this setup properly for rx buffer
+		 * DMA to work so force a reasonable value here if it
+		 * comes up zero.
+		 */
+		csz = L1_CACHE_BYTES >> 2;
+		pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
+	}
+	/*
+	 * The default setting of latency timer yields poor results,
+	 * set it to the value used by other systems.  It may be worth
+	 * tweaking this setting more.
+	 */
+	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
+
+	/* Enable bus mastering */
+	pci_set_master(pdev);
+
+	/*
+	 * Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state.
+	 */
+	pci_write_config_byte(pdev, 0x41, 0);
+
+	ret = pci_request_region(pdev, 0, "ath5k");
+	if (ret) {
+		dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
+		goto err_dis;
+	}
+
+	mem = pci_iomap(pdev, 0, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
+		ret = -EIO;
+		goto err_reg;
+	}
+
+	/*
+	 * Allocate hw (mac80211 main struct)
+	 * and hw->priv (driver private data)
+	 */
+	hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
+	if (hw == NULL) {
+		dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
+		ret = -ENOMEM;
+		goto err_map;
+	}
+
+	dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
+
+	sc = hw->priv;
+	sc->hw = hw;
+	sc->pdev = pdev;
+	sc->dev = &pdev->dev;
+	sc->irq = pdev->irq;
+	sc->devid = id->device;
+	sc->iobase = mem; /* So we can unmap it on detach */
+
+	/* Initialize */
+	ret = ath5k_init_softc(sc, &ath_pci_bus_ops);
+	if (ret)
+		goto err_free;
+
+	/* Set private data */
+	pci_set_drvdata(pdev, hw);
+
+	return 0;
+err_free:
+	ieee80211_free_hw(hw);
+err_map:
+	pci_iounmap(pdev, mem);
+err_reg:
+	pci_release_region(pdev, 0);
+err_dis:
+	pci_disable_device(pdev);
+err:
+	return ret;
+}
+
+static void __devexit
+ath5k_pci_remove(struct pci_dev *pdev)
+{
+	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ath5k_softc *sc = hw->priv;
+
+	ath5k_deinit_softc(sc);
+	pci_iounmap(pdev, sc->iobase);
+	pci_release_region(pdev, 0);
+	pci_disable_device(pdev);
+	ieee80211_free_hw(hw);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ath5k_pci_suspend(struct device *dev)
+{
+	struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
+
+	ath5k_led_off(sc);
+	return 0;
+}
+
+static int ath5k_pci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct ath5k_softc *sc = pci_get_drvdata(pdev);
+
+	/*
+	 * Suspend/Resume resets the PCI configuration space, so we have to
+	 * re-disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state
+	 */
+	pci_write_config_byte(pdev, 0x41, 0);
+
+	ath5k_led_enable(sc);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
+#define ATH5K_PM_OPS	(&ath5k_pm_ops)
+#else
+#define ATH5K_PM_OPS	NULL
+#endif /* CONFIG_PM_SLEEP */
+
+static struct pci_driver ath5k_pci_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= ath5k_pci_id_table,
+	.probe		= ath5k_pci_probe,
+	.remove		= __devexit_p(ath5k_pci_remove),
+	.driver.pm	= ATH5K_PM_OPS,
+};
+
+/*
+ * Module init/exit functions
+ */
+static int __init
+init_ath5k_pci(void)
+{
+	int ret;
+
+	ret = pci_register_driver(&ath5k_pci_driver);
+	if (ret) {
+		printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit
+exit_ath5k_pci(void)
+{
+	pci_unregister_driver(&ath5k_pci_driver);
+}
+
+module_init(init_ath5k_pci);
+module_exit(exit_ath5k_pci);
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 074b4c64439..e5f2b96a4c6 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -31,87 +31,163 @@
 #include "debug.h"
 #include "base.h"
 
+/*
+ * AR5212+ can use higher rates for ack transmition
+ * based on current tx rate instead of the base rate.
+ * It does this to better utilize channel usage.
+ * This is a mapping between G rates (that cover both
+ * CCK and OFDM) and ack rates that we use when setting
+ * rate -> duration table. This mapping is hw-based so
+ * don't change anything.
+ *
+ * To enable this functionality we must set
+ * ah->ah_ack_bitrate_high to true else base rate is
+ * used (1Mb for CCK, 6Mb for OFDM).
+ */
+static const unsigned int ack_rates_high[] =
+/* Tx	-> ACK	*/
+/* 1Mb	-> 1Mb	*/	{ 0,
+/* 2MB	-> 2Mb	*/	1,
+/* 5.5Mb -> 2Mb	*/	1,
+/* 11Mb	-> 2Mb	*/	1,
+/* 6Mb	-> 6Mb	*/	4,
+/* 9Mb	-> 6Mb	*/	4,
+/* 12Mb	-> 12Mb	*/	6,
+/* 18Mb	-> 12Mb	*/	6,
+/* 24Mb	-> 24Mb	*/	8,
+/* 36Mb	-> 24Mb	*/	8,
+/* 48Mb	-> 24Mb	*/	8,
+/* 54Mb	-> 24Mb	*/	8 };
+
 /*******************\
-* Generic functions *
+* Helper functions *
 \*******************/
 
 /**
- * ath5k_hw_set_opmode - Set PCU operating mode
+ * ath5k_hw_get_frame_duration - Get tx time of a frame
  *
  * @ah: The &struct ath5k_hw
- * @op_mode: &enum nl80211_iftype operating mode
+ * @len: Frame's length in bytes
+ * @rate: The @struct ieee80211_rate
  *
- * Initialize PCU for the various operating modes (AP/STA etc)
+ * Calculate tx duration of a frame given it's rate and length
+ * It extends ieee80211_generic_frame_duration for non standard
+ * bwmodes.
  */
-int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
+int ath5k_hw_get_frame_duration(struct ath5k_hw *ah,
+		int len, struct ieee80211_rate *rate)
 {
-	struct ath_common *common = ath5k_hw_common(ah);
-	u32 pcu_reg, beacon_reg, low_id, high_id;
+	struct ath5k_softc *sc = ah->ah_sc;
+	int sifs, preamble, plcp_bits, sym_time;
+	int bitrate, bits, symbols, symbol_bits;
+	int dur;
+
+	/* Fallback */
+	if (!ah->ah_bwmode) {
+		dur = ieee80211_generic_frame_duration(sc->hw,
+						NULL, len, rate);
+		return dur;
+	}
 
-	ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_MODE, "mode %d\n", op_mode);
+	bitrate = rate->bitrate;
+	preamble = AR5K_INIT_OFDM_PREAMPLE_TIME;
+	plcp_bits = AR5K_INIT_OFDM_PLCP_BITS;
+	sym_time = AR5K_INIT_OFDM_SYMBOL_TIME;
 
-	/* Preserve rest settings */
-	pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
-	pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP
-			| AR5K_STA_ID1_KEYSRCH_MODE
-			| (ah->ah_version == AR5K_AR5210 ?
-			(AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0));
+	switch (ah->ah_bwmode) {
+	case AR5K_BWMODE_40MHZ:
+		sifs = AR5K_INIT_SIFS_TURBO;
+		preamble = AR5K_INIT_OFDM_PREAMBLE_TIME_MIN;
+		break;
+	case AR5K_BWMODE_10MHZ:
+		sifs = AR5K_INIT_SIFS_HALF_RATE;
+		preamble *= 2;
+		sym_time *= 2;
+		break;
+	case AR5K_BWMODE_5MHZ:
+		sifs = AR5K_INIT_SIFS_QUARTER_RATE;
+		preamble *= 4;
+		sym_time *= 4;
+		break;
+	default:
+		sifs = AR5K_INIT_SIFS_DEFAULT_BG;
+		break;
+	}
 
-	beacon_reg = 0;
+	bits = plcp_bits + (len << 3);
+	/* Bit rate is in 100Kbits */
+	symbol_bits = bitrate * sym_time;
+	symbols = DIV_ROUND_UP(bits * 10, symbol_bits);
 
-	switch (op_mode) {
-	case NL80211_IFTYPE_ADHOC:
-		pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE;
-		beacon_reg |= AR5K_BCR_ADHOC;
-		if (ah->ah_version == AR5K_AR5210)
-			pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
-		else
-			AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
-		break;
+	dur = sifs + preamble + (sym_time * symbols);
 
-	case NL80211_IFTYPE_AP:
-	case NL80211_IFTYPE_MESH_POINT:
-		pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE;
-		beacon_reg |= AR5K_BCR_AP;
-		if (ah->ah_version == AR5K_AR5210)
-			pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
-		else
-			AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
-		break;
+	return dur;
+}
 
-	case NL80211_IFTYPE_STATION:
-		pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
-			| (ah->ah_version == AR5K_AR5210 ?
-				AR5K_STA_ID1_PWR_SV : 0);
-	case NL80211_IFTYPE_MONITOR:
-		pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
-			| (ah->ah_version == AR5K_AR5210 ?
-				AR5K_STA_ID1_NO_PSPOLL : 0);
-		break;
+/**
+ * ath5k_hw_get_default_slottime - Get the default slot time for current mode
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
+{
+	struct ieee80211_channel *channel = ah->ah_current_channel;
+	unsigned int slot_time;
 
+	switch (ah->ah_bwmode) {
+	case AR5K_BWMODE_40MHZ:
+		slot_time = AR5K_INIT_SLOT_TIME_TURBO;
+		break;
+	case AR5K_BWMODE_10MHZ:
+		slot_time = AR5K_INIT_SLOT_TIME_HALF_RATE;
+		break;
+	case AR5K_BWMODE_5MHZ:
+		slot_time = AR5K_INIT_SLOT_TIME_QUARTER_RATE;
+		break;
+	case AR5K_BWMODE_DEFAULT:
+		slot_time = AR5K_INIT_SLOT_TIME_DEFAULT;
 	default:
-		return -EINVAL;
+		if (channel->hw_value & CHANNEL_CCK)
+			slot_time = AR5K_INIT_SLOT_TIME_B;
+		break;
 	}
 
-	/*
-	 * Set PCU registers
-	 */
-	low_id = get_unaligned_le32(common->macaddr);
-	high_id = get_unaligned_le16(common->macaddr + 4);
-	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
-	ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+	return slot_time;
+}
 
-	/*
-	 * Set Beacon Control Register on 5210
-	 */
-	if (ah->ah_version == AR5K_AR5210)
-		ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+/**
+ * ath5k_hw_get_default_sifs - Get the default SIFS for current mode
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
+{
+	struct ieee80211_channel *channel = ah->ah_current_channel;
+	unsigned int sifs;
 
-	return 0;
+	switch (ah->ah_bwmode) {
+	case AR5K_BWMODE_40MHZ:
+		sifs = AR5K_INIT_SIFS_TURBO;
+		break;
+	case AR5K_BWMODE_10MHZ:
+		sifs = AR5K_INIT_SIFS_HALF_RATE;
+		break;
+	case AR5K_BWMODE_5MHZ:
+		sifs = AR5K_INIT_SIFS_QUARTER_RATE;
+		break;
+	case AR5K_BWMODE_DEFAULT:
+		sifs = AR5K_INIT_SIFS_DEFAULT_BG;
+	default:
+		if (channel->hw_value & CHANNEL_5GHZ)
+			sifs = AR5K_INIT_SIFS_DEFAULT_A;
+		break;
+	}
+
+	return sifs;
 }
 
 /**
- * ath5k_hw_update - Update MIB counters (mac layer statistics)
+ * ath5k_hw_update_mib_counters - Update MIB counters (mac layer statistics)
  *
  * @ah: The &struct ath5k_hw
  *
@@ -133,36 +209,88 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
 	stats->beacons += ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
 }
 
+
+/******************\
+* ACK/CTS Timeouts *
+\******************/
+
 /**
- * ath5k_hw_set_ack_bitrate - set bitrate for ACKs
+ * ath5k_hw_write_rate_duration - fill rate code to duration table
  *
- * @ah: The &struct ath5k_hw
- * @high: Flag to determine if we want to use high transmission rate
- * for ACKs or not
+ * @ah: the &struct ath5k_hw
+ * @mode: one of enum ath5k_driver_mode
+ *
+ * Write the rate code to duration table upon hw reset. This is a helper for
+ * ath5k_hw_pcu_init(). It seems all this is doing is setting an ACK timeout on
+ * the hardware, based on current mode, for each rate. The rates which are
+ * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have
+ * different rate code so we write their value twice (one for long preamble
+ * and one for short).
+ *
+ * Note: Band doesn't matter here, if we set the values for OFDM it works
+ * on both a and g modes. So all we have to do is set values for all g rates
+ * that include all OFDM and CCK rates.
  *
- * If high flag is set, we tell hw to use a set of control rates based on
- * the current transmission rate (check out control_rates array inside reset.c).
- * If not hw just uses the lowest rate available for the current modulation
- * scheme being used (1Mbit for CCK and 6Mbits for OFDM).
  */
-void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
+static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah)
 {
-	if (ah->ah_version != AR5K_AR5212)
-		return;
-	else {
-		u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
-		if (high)
-			AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+	struct ath5k_softc *sc = ah->ah_sc;
+	struct ieee80211_rate *rate;
+	unsigned int i;
+	/* 802.11g covers both OFDM and CCK */
+	u8 band = IEEE80211_BAND_2GHZ;
+
+	/* Write rate duration table */
+	for (i = 0; i < sc->sbands[band].n_bitrates; i++) {
+		u32 reg;
+		u16 tx_time;
+
+		if (ah->ah_ack_bitrate_high)
+			rate = &sc->sbands[band].bitrates[ack_rates_high[i]];
+		/* CCK -> 1Mb */
+		else if (i < 4)
+			rate = &sc->sbands[band].bitrates[0];
+		/* OFDM -> 6Mb */
 		else
-			AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+			rate = &sc->sbands[band].bitrates[4];
+
+		/* Set ACK timeout */
+		reg = AR5K_RATE_DUR(rate->hw_value);
+
+		/* An ACK frame consists of 10 bytes. If you add the FCS,
+		 * which ieee80211_generic_frame_duration() adds,
+		 * its 14 bytes. Note we use the control rate and not the
+		 * actual rate for this rate. See mac80211 tx.c
+		 * ieee80211_duration() for a brief description of
+		 * what rate we should choose to TX ACKs. */
+		tx_time = ath5k_hw_get_frame_duration(ah, 10, rate);
+
+		tx_time = le16_to_cpu(tx_time);
+
+		ath5k_hw_reg_write(ah, tx_time, reg);
+
+		if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
+			continue;
+
+		/*
+		 * We're not distinguishing short preamble here,
+		 * This is true, all we'll get is a longer value here
+		 * which is not necessarilly bad. We could use
+		 * export ieee80211_frame_duration() but that needs to be
+		 * fixed first to be properly used by mac802111 drivers:
+		 *
+		 *  - remove erp stuff and let the routine figure ofdm
+		 *    erp rates
+		 *  - remove passing argument ieee80211_local as
+		 *    drivers don't have access to it
+		 *  - move drivers using ieee80211_generic_frame_duration()
+		 *    to this
+		 */
+		ath5k_hw_reg_write(ah, tx_time,
+			reg + (AR5K_SET_SHORT_PREAMBLE << 2));
 	}
 }
 
-
-/******************\
-* ACK/CTS Timeouts *
-\******************/
-
 /**
  * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU
  *
@@ -199,88 +327,10 @@ static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
 	return 0;
 }
 
-/**
- * ath5k_hw_htoclock - Translate usec to hw clock units
- *
- * @ah: The &struct ath5k_hw
- * @usec: value in microseconds
- */
-unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec)
-{
-	struct ath_common *common = ath5k_hw_common(ah);
-	return usec * common->clockrate;
-}
-
-/**
- * ath5k_hw_clocktoh - Translate hw clock units to usec
- * @clock: value in hw clock units
- */
-unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock)
-{
-	struct ath_common *common = ath5k_hw_common(ah);
-	return clock / common->clockrate;
-}
-
-/**
- * ath5k_hw_set_clockrate - Set common->clockrate for the current channel
- *
- * @ah: The &struct ath5k_hw
- */
-void ath5k_hw_set_clockrate(struct ath5k_hw *ah)
-{
-	struct ieee80211_channel *channel = ah->ah_current_channel;
-	struct ath_common *common = ath5k_hw_common(ah);
-	int clock;
-
-	if (channel->hw_value & CHANNEL_5GHZ)
-		clock = 40; /* 802.11a */
-	else if (channel->hw_value & CHANNEL_CCK)
-		clock = 22; /* 802.11b */
-	else
-		clock = 44; /* 802.11g */
-
-	/* Clock rate in turbo modes is twice the normal rate */
-	if (channel->hw_value & CHANNEL_TURBO)
-		clock *= 2;
-
-	common->clockrate = clock;
-}
-
-/**
- * ath5k_hw_get_default_slottime - Get the default slot time for current mode
- *
- * @ah: The &struct ath5k_hw
- */
-static unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah)
-{
-	struct ieee80211_channel *channel = ah->ah_current_channel;
-
-	if (channel->hw_value & CHANNEL_TURBO)
-		return 6; /* both turbo modes */
-
-	if (channel->hw_value & CHANNEL_CCK)
-		return 20; /* 802.11b */
-
-	return 9; /* 802.11 a/g */
-}
-
-/**
- * ath5k_hw_get_default_sifs - Get the default SIFS for current mode
- *
- * @ah: The &struct ath5k_hw
- */
-static unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah)
-{
-	struct ieee80211_channel *channel = ah->ah_current_channel;
-
-	if (channel->hw_value & CHANNEL_TURBO)
-		return 8; /* both turbo modes */
 
-	if (channel->hw_value & CHANNEL_5GHZ)
-		return 16; /* 802.11a */
-
-	return 10; /* 802.11 b/g */
-}
+/*******************\
+* RX filter Control *
+\*******************/
 
 /**
  * ath5k_hw_set_lladdr - Set station id
@@ -362,39 +412,6 @@ void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
 		ath_hw_setbssidmask(common);
 }
 
-/************\
-* RX Control *
-\************/
-
-/**
- * ath5k_hw_start_rx_pcu - Start RX engine
- *
- * @ah: The &struct ath5k_hw
- *
- * Starts RX engine on PCU so that hw can process RXed frames
- * (ACK etc).
- *
- * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
- */
-void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
-{
-	AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
-}
-
-/**
- * at5k_hw_stop_rx_pcu - Stop RX engine
- *
- * @ah: The &struct ath5k_hw
- *
- * Stops RX engine on PCU
- *
- * TODO: Detach ANI here
- */
-void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
-{
-	AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
-}
-
 /*
  * Set multicast filter
  */
@@ -746,7 +763,7 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval)
  * @ah: The &struct ath5k_hw
  * @coverage_class: IEEE 802.11 coverage class number
  *
- * Sets slot time, ACK timeout and CTS timeout for given coverage class.
+ * Sets IFS intervals and ACK/CTS timeouts for given coverage class.
  */
 void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
 {
@@ -755,9 +772,175 @@ void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class)
 	int ack_timeout = ath5k_hw_get_default_sifs(ah) + slot_time;
 	int cts_timeout = ack_timeout;
 
-	ath5k_hw_set_slot_time(ah, slot_time);
+	ath5k_hw_set_ifs_intervals(ah, slot_time);
 	ath5k_hw_set_ack_timeout(ah, ack_timeout);
 	ath5k_hw_set_cts_timeout(ah, cts_timeout);
 
 	ah->ah_coverage_class = coverage_class;
 }
+
+/***************************\
+* Init/Start/Stop functions *
+\***************************/
+
+/**
+ * ath5k_hw_start_rx_pcu - Start RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Starts RX engine on PCU so that hw can process RXed frames
+ * (ACK etc).
+ *
+ * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
+ */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+{
+	AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * at5k_hw_stop_rx_pcu - Stop RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Stops RX engine on PCU
+ */
+void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
+{
+	AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * ath5k_hw_set_opmode - Set PCU operating mode
+ *
+ * @ah: The &struct ath5k_hw
+ * @op_mode: &enum nl80211_iftype operating mode
+ *
+ * Configure PCU for the various operating modes (AP/STA etc)
+ */
+int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode)
+{
+	struct ath_common *common = ath5k_hw_common(ah);
+	u32 pcu_reg, beacon_reg, low_id, high_id;
+
+	ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_MODE, "mode %d\n", op_mode);
+
+	/* Preserve rest settings */
+	pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
+	pcu_reg &= ~(AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_AP
+			| AR5K_STA_ID1_KEYSRCH_MODE
+			| (ah->ah_version == AR5K_AR5210 ?
+			(AR5K_STA_ID1_PWR_SV | AR5K_STA_ID1_NO_PSPOLL) : 0));
+
+	beacon_reg = 0;
+
+	switch (op_mode) {
+	case NL80211_IFTYPE_ADHOC:
+		pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_KEYSRCH_MODE;
+		beacon_reg |= AR5K_BCR_ADHOC;
+		if (ah->ah_version == AR5K_AR5210)
+			pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
+		else
+			AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
+		break;
+
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_MESH_POINT:
+		pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_KEYSRCH_MODE;
+		beacon_reg |= AR5K_BCR_AP;
+		if (ah->ah_version == AR5K_AR5210)
+			pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
+		else
+			AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
+		break;
+
+	case NL80211_IFTYPE_STATION:
+		pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
+			| (ah->ah_version == AR5K_AR5210 ?
+				AR5K_STA_ID1_PWR_SV : 0);
+	case NL80211_IFTYPE_MONITOR:
+		pcu_reg |= AR5K_STA_ID1_KEYSRCH_MODE
+			| (ah->ah_version == AR5K_AR5210 ?
+				AR5K_STA_ID1_NO_PSPOLL : 0);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Set PCU registers
+	 */
+	low_id = get_unaligned_le32(common->macaddr);
+	high_id = get_unaligned_le16(common->macaddr + 4);
+	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+	ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+	/*
+	 * Set Beacon Control Register on 5210
+	 */
+	if (ah->ah_version == AR5K_AR5210)
+		ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+
+	return 0;
+}
+
+void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
+								u8 mode)
+{
+	/* Set bssid and bssid mask */
+	ath5k_hw_set_bssid(ah);
+
+	/* Set PCU config */
+	ath5k_hw_set_opmode(ah, op_mode);
+
+	/* Write rate duration table only on AR5212 and if
+	 * virtual interface has already been brought up
+	 * XXX: rethink this after new mode changes to
+	 * mac80211 are integrated */
+	if (ah->ah_version == AR5K_AR5212 &&
+		ah->ah_sc->nvifs)
+		ath5k_hw_write_rate_duration(ah);
+
+	/* Set RSSI/BRSSI thresholds
+	 *
+	 * Note: If we decide to set this value
+	 * dynamicaly, have in mind that when AR5K_RSSI_THR
+	 * register is read it might return 0x40 if we haven't
+	 * wrote anything to it plus BMISS RSSI threshold is zeroed.
+	 * So doing a save/restore procedure here isn't the right
+	 * choice. Instead store it on ath5k_hw */
+	ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
+				AR5K_TUNE_BMISS_THRES <<
+				AR5K_RSSI_THR_BMISS_S),
+				AR5K_RSSI_THR);
+
+	/* MIC QoS support */
+	if (ah->ah_mac_srev >= AR5K_SREV_AR2413) {
+		ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL);
+		ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL);
+	}
+
+	/* QoS NOACK Policy */
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) |
+			AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET)  |
+			AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET),
+			AR5K_QOS_NOACK);
+	}
+
+	/* Restore slot time and ACK timeouts */
+	if (ah->ah_coverage_class > 0)
+		ath5k_hw_set_coverage_class(ah, ah->ah_coverage_class);
+
+	/* Set ACK bitrate mode (see ack_rates_high) */
+	if (ah->ah_version == AR5K_AR5212) {
+		u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
+		if (ah->ah_ack_bitrate_high)
+			AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+		else
+			AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+	}
+	return;
+}
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 219367884e6..78c26fdccad 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -29,6 +29,95 @@
 #include "rfbuffer.h"
 #include "rfgain.h"
 
+
+/******************\
+* Helper functions *
+\******************/
+
+/*
+ * Get the PHY Chip revision
+ */
+u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan)
+{
+	unsigned int i;
+	u32 srev;
+	u16 ret;
+
+	/*
+	 * Set the radio chip access register
+	 */
+	switch (chan) {
+	case CHANNEL_2GHZ:
+		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0));
+		break;
+	case CHANNEL_5GHZ:
+		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+		break;
+	default:
+		return 0;
+	}
+
+	mdelay(2);
+
+	/* ...wait until PHY is ready and read the selected radio revision */
+	ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34));
+
+	for (i = 0; i < 8; i++)
+		ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20));
+
+	if (ah->ah_version == AR5K_AR5210) {
+		srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf;
+		ret = (u16)ath5k_hw_bitswap(srev, 4) + 1;
+	} else {
+		srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff;
+		ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) |
+				((srev & 0x0f) << 4), 8);
+	}
+
+	/* Reset to the 5GHz mode */
+	ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+
+	return ret;
+}
+
+/*
+ * Check if a channel is supported
+ */
+bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags)
+{
+	/* Check if the channel is in our supported range */
+	if (flags & CHANNEL_2GHZ) {
+		if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) &&
+		    (freq <= ah->ah_capabilities.cap_range.range_2ghz_max))
+			return true;
+	} else if (flags & CHANNEL_5GHZ)
+		if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) &&
+		    (freq <= ah->ah_capabilities.cap_range.range_5ghz_max))
+			return true;
+
+	return false;
+}
+
+bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
+				struct ieee80211_channel *channel)
+{
+	u8 refclk_freq;
+
+	if ((ah->ah_radio == AR5K_RF5112) ||
+	(ah->ah_radio == AR5K_RF5413) ||
+	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+		refclk_freq = 40;
+	else
+		refclk_freq = 32;
+
+	if ((channel->center_freq % refclk_freq != 0) &&
+	((channel->center_freq % refclk_freq < 10) ||
+	(channel->center_freq % refclk_freq > 22)))
+		return true;
+	else
+		return false;
+}
+
 /*
  * Used to modify RF Banks before writing them to AR5K_RF_BUFFER
  */
@@ -110,6 +199,90 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
 	return data;
 }
 
+/**
+ * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
+ *
+ * @ah: the &struct ath5k_hw
+ * @channel: the currently set channel upon reset
+ *
+ * Write the delta slope coefficient (used on pilot tracking ?) for OFDM
+ * operation on the AR5212 upon reset. This is a helper for ath5k_hw_phy_init.
+ *
+ * Since delta slope is floating point we split it on its exponent and
+ * mantissa and provide these values on hw.
+ *
+ * For more infos i think this patent is related
+ * http://www.freepatentsonline.com/7184495.html
+ */
+static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+	struct ieee80211_channel *channel)
+{
+	/* Get exponent and mantissa and set it */
+	u32 coef_scaled, coef_exp, coef_man,
+		ds_coef_exp, ds_coef_man, clock;
+
+	BUG_ON(!(ah->ah_version == AR5K_AR5212) ||
+		!(channel->hw_value & CHANNEL_OFDM));
+
+	/* Get coefficient
+	 * ALGO: coef = (5 * clock / carrier_freq) / 2
+	 * we scale coef by shifting clock value by 24 for
+	 * better precision since we use integers */
+	switch (ah->ah_bwmode) {
+	case AR5K_BWMODE_40MHZ:
+		clock = 40 * 2;
+		break;
+	case AR5K_BWMODE_10MHZ:
+		clock = 40 / 2;
+		break;
+	case AR5K_BWMODE_5MHZ:
+		clock = 40 / 4;
+		break;
+	default:
+		clock = 40;
+		break;
+	}
+	coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq;
+
+	/* Get exponent
+	 * ALGO: coef_exp = 14 - highest set bit position */
+	coef_exp = ilog2(coef_scaled);
+
+	/* Doesn't make sense if it's zero*/
+	if (!coef_scaled || !coef_exp)
+		return -EINVAL;
+
+	/* Note: we've shifted coef_scaled by 24 */
+	coef_exp = 14 - (coef_exp - 24);
+
+
+	/* Get mantissa (significant digits)
+	 * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */
+	coef_man = coef_scaled +
+		(1 << (24 - coef_exp - 1));
+
+	/* Calculate delta slope coefficient exponent
+	 * and mantissa (remove scaling) and set them on hw */
+	ds_coef_man = coef_man >> (24 - coef_exp);
+	ds_coef_exp = coef_exp - 16;
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+		AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+		AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
+
+	return 0;
+}
+
+int ath5k_hw_phy_disable(struct ath5k_hw *ah)
+{
+	/*Just a try M.F.*/
+	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+
+	return 0;
+}
+
+
 /**********************\
 * RF Gain optimization *
 \**********************/
@@ -436,10 +609,10 @@ done:
 /* Write initial RF gain table to set the RF sensitivity
  * this one works on all RF chips and has nothing to do
  * with gain_F calibration */
-int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq)
+static int ath5k_hw_rfgain_init(struct ath5k_hw *ah, enum ieee80211_band band)
 {
 	const struct ath5k_ini_rfgain *ath5k_rfg;
-	unsigned int i, size;
+	unsigned int i, size, index;
 
 	switch (ah->ah_radio) {
 	case AR5K_RF5111:
@@ -471,17 +644,11 @@ int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq)
 		return -EINVAL;
 	}
 
-	switch (freq) {
-	case AR5K_INI_RFGAIN_2GHZ:
-	case AR5K_INI_RFGAIN_5GHZ:
-		break;
-	default:
-		return -EINVAL;
-	}
+	index = (band == IEEE80211_BAND_2GHZ) ? 1 : 0;
 
 	for (i = 0; i < size; i++) {
 		AR5K_REG_WAIT(i);
-		ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[freq],
+		ath5k_hw_reg_write(ah, ath5k_rfg[i].rfg_value[index],
 			(u32)ath5k_rfg[i].rfg_register);
 	}
 
@@ -494,12 +661,11 @@ int ath5k_hw_rfgain_init(struct ath5k_hw *ah, unsigned int freq)
 * RF Registers setup *
 \********************/
 
-
 /*
  * Setup RF registers by writing RF buffer on hw
  */
-int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
-		unsigned int mode)
+static int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
+	struct ieee80211_channel *channel, unsigned int mode)
 {
 	const struct ath5k_rf_reg *rf_regs;
 	const struct ath5k_ini_rfbuffer *ini_rfb;
@@ -652,6 +818,11 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 
 	g_step = &go->go_step[ah->ah_gain.g_step_idx];
 
+	/* Set turbo mode (N/A on RF5413) */
+	if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) &&
+	(ah->ah_radio != AR5K_RF5413))
+		ath5k_hw_rfb_op(ah, rf_regs, 1, AR5K_RF_TURBO, false);
+
 	/* Bank Modifications (chip-specific) */
 	if (ah->ah_radio == AR5K_RF5111) {
 
@@ -691,7 +862,23 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		ath5k_hw_rfb_op(ah, rf_regs, ee->ee_xpd[ee_mode],
 						AR5K_RF_PLO_SEL, true);
 
-		/* TODO: Half/quarter channel support */
+		/* Tweak power detectors for half/quarter rate support */
+		if (ah->ah_bwmode == AR5K_BWMODE_5MHZ ||
+		ah->ah_bwmode == AR5K_BWMODE_10MHZ) {
+			u8 wait_i;
+
+			ath5k_hw_rfb_op(ah, rf_regs, 0x1f,
+						AR5K_RF_WAIT_S, true);
+
+			wait_i = (ah->ah_bwmode == AR5K_BWMODE_5MHZ) ?
+							0x1f : 0x10;
+
+			ath5k_hw_rfb_op(ah, rf_regs, wait_i,
+						AR5K_RF_WAIT_I, true);
+			ath5k_hw_rfb_op(ah, rf_regs, 3,
+						AR5K_RF_MAX_TIME, true);
+
+		}
 	}
 
 	if (ah->ah_radio == AR5K_RF5112) {
@@ -789,8 +976,20 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		ath5k_hw_rfb_op(ah, rf_regs, ee->ee_i_gain[ee_mode],
 						AR5K_RF_GAIN_I, true);
 
-		/* TODO: Half/quarter channel support */
+		/* Tweak power detector for half/quarter rates */
+		if (ah->ah_bwmode == AR5K_BWMODE_5MHZ ||
+		ah->ah_bwmode == AR5K_BWMODE_10MHZ) {
+			u8 pd_delay;
 
+			pd_delay = (ah->ah_bwmode == AR5K_BWMODE_5MHZ) ?
+							0xf : 0x8;
+
+			ath5k_hw_rfb_op(ah, rf_regs, pd_delay,
+						AR5K_RF_PD_PERIOD_A, true);
+			ath5k_hw_rfb_op(ah, rf_regs, 0xf,
+						AR5K_RF_PD_DELAY_A, true);
+
+		}
 	}
 
 	if (ah->ah_radio == AR5K_RF5413 &&
@@ -822,24 +1021,6 @@ int ath5k_hw_rfregs_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 \**************************/
 
 /*
- * Check if a channel is supported
- */
-bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags)
-{
-	/* Check if the channel is in our supported range */
-	if (flags & CHANNEL_2GHZ) {
-		if ((freq >= ah->ah_capabilities.cap_range.range_2ghz_min) &&
-		    (freq <= ah->ah_capabilities.cap_range.range_2ghz_max))
-			return true;
-	} else if (flags & CHANNEL_5GHZ)
-		if ((freq >= ah->ah_capabilities.cap_range.range_5ghz_min) &&
-		    (freq <= ah->ah_capabilities.cap_range.range_5ghz_max))
-			return true;
-
-	return false;
-}
-
-/*
  * Convertion needed for RF5110
  */
 static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
@@ -1045,7 +1226,8 @@ static int ath5k_hw_rf2425_channel(struct ath5k_hw *ah,
 /*
  * Set a channel on the radio chip
  */
-int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
+static int ath5k_hw_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel)
 {
 	int ret;
 	/*
@@ -1092,8 +1274,6 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
 	}
 
 	ah->ah_current_channel = channel;
-	ah->ah_turbo = channel->hw_value == CHANNEL_T ? true : false;
-	ath5k_hw_set_clockrate(ah);
 
 	return 0;
 }
@@ -1102,18 +1282,12 @@ int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel)
   PHY calibration
 \*****************/
 
-static int sign_extend(int val, const int nbits)
-{
-	int order = BIT(nbits-1);
-	return (val ^ order) - order;
-}
-
 static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah)
 {
 	s32 val;
 
 	val = ath5k_hw_reg_read(ah, AR5K_PHY_NF);
-	return sign_extend(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 9);
+	return sign_extend32(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 8);
 }
 
 void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
@@ -1181,22 +1355,7 @@ void ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
 		return;
 	}
 
-	switch (ah->ah_current_channel->hw_value & CHANNEL_MODES) {
-	case CHANNEL_A:
-	case CHANNEL_T:
-	case CHANNEL_XR:
-		ee_mode = AR5K_EEPROM_MODE_11A;
-		break;
-	case CHANNEL_G:
-	case CHANNEL_TG:
-		ee_mode = AR5K_EEPROM_MODE_11G;
-		break;
-	default:
-	case CHANNEL_B:
-		ee_mode = AR5K_EEPROM_MODE_11B;
-		break;
-	}
-
+	ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel);
 
 	/* completed NF calibration, test threshold */
 	nf = ath5k_hw_read_measured_noise_floor(ah);
@@ -1425,31 +1584,12 @@ int ath5k_hw_phy_calibrate(struct ath5k_hw *ah,
 	return ret;
 }
 
+
 /***************************\
 * Spur mitigation functions *
 \***************************/
 
-bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
-				struct ieee80211_channel *channel)
-{
-	u8 refclk_freq;
-
-	if ((ah->ah_radio == AR5K_RF5112) ||
-	(ah->ah_radio == AR5K_RF5413) ||
-	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
-		refclk_freq = 40;
-	else
-		refclk_freq = 32;
-
-	if ((channel->center_freq % refclk_freq != 0) &&
-	((channel->center_freq % refclk_freq < 10) ||
-	(channel->center_freq % refclk_freq > 22)))
-		return true;
-	else
-		return false;
-}
-
-void
+static void
 ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
 				struct ieee80211_channel *channel)
 {
@@ -1478,7 +1618,7 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
 	spur_chan_fbin = AR5K_EEPROM_NO_SPUR;
 	spur_detection_window = AR5K_SPUR_CHAN_WIDTH;
 	/* XXX: Half/Quarter channels ?*/
-	if (channel->hw_value & CHANNEL_TURBO)
+	if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
 		spur_detection_window *= 2;
 
 	for (i = 0; i < AR5K_EEPROM_N_SPUR_CHANS; i++) {
@@ -1507,32 +1647,43 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
 		 * Calculate deltas:
 		 * spur_freq_sigma_delta -> spur_offset / sample_freq << 21
 		 * spur_delta_phase -> spur_offset / chip_freq << 11
-		 * Note: Both values have 100KHz resolution
+		 * Note: Both values have 100Hz resolution
 		 */
-		/* XXX: Half/Quarter rate channels ? */
-		switch (channel->hw_value) {
-		case CHANNEL_A:
-			/* Both sample_freq and chip_freq are 40MHz */
-			spur_delta_phase = (spur_offset << 17) / 25;
-			spur_freq_sigma_delta = (spur_delta_phase >> 10);
-			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
-			break;
-		case CHANNEL_G:
-			/* sample_freq -> 40MHz chip_freq -> 44MHz
-			 * (for b compatibility) */
-			spur_freq_sigma_delta = (spur_offset << 8) / 55;
-			spur_delta_phase = (spur_offset << 17) / 25;
-			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
-			break;
-		case CHANNEL_T:
-		case CHANNEL_TG:
+		switch (ah->ah_bwmode) {
+		case AR5K_BWMODE_40MHZ:
 			/* Both sample_freq and chip_freq are 80MHz */
 			spur_delta_phase = (spur_offset << 16) / 25;
 			spur_freq_sigma_delta = (spur_delta_phase >> 10);
-			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_TURBO_100Hz;
+			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz * 2;
 			break;
+		case AR5K_BWMODE_10MHZ:
+			/* Both sample_freq and chip_freq are 20MHz (?) */
+			spur_delta_phase = (spur_offset << 18) / 25;
+			spur_freq_sigma_delta = (spur_delta_phase >> 10);
+			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 2;
+		case AR5K_BWMODE_5MHZ:
+			/* Both sample_freq and chip_freq are 10MHz (?) */
+			spur_delta_phase = (spur_offset << 19) / 25;
+			spur_freq_sigma_delta = (spur_delta_phase >> 10);
+			symbol_width = AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz / 4;
 		default:
-			return;
+			if (channel->hw_value == CHANNEL_A) {
+				/* Both sample_freq and chip_freq are 40MHz */
+				spur_delta_phase = (spur_offset << 17) / 25;
+				spur_freq_sigma_delta =
+						(spur_delta_phase >> 10);
+				symbol_width =
+					AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+			} else {
+				/* sample_freq -> 40MHz chip_freq -> 44MHz
+				 * (for b compatibility) */
+				spur_delta_phase = (spur_offset << 17) / 25;
+				spur_freq_sigma_delta =
+						(spur_offset << 8) / 55;
+				symbol_width =
+					AR5K_SPUR_SYMBOL_WIDTH_BASE_100Hz;
+			}
+			break;
 		}
 
 		/* Calculate pilot and magnitude masks */
@@ -1672,63 +1823,6 @@ ath5k_hw_set_spur_mitigation_filter(struct ath5k_hw *ah,
 	}
 }
 
-/********************\
-  Misc PHY functions
-\********************/
-
-int ath5k_hw_phy_disable(struct ath5k_hw *ah)
-{
-	/*Just a try M.F.*/
-	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
-
-	return 0;
-}
-
-/*
- * Get the PHY Chip revision
- */
-u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan)
-{
-	unsigned int i;
-	u32 srev;
-	u16 ret;
-
-	/*
-	 * Set the radio chip access register
-	 */
-	switch (chan) {
-	case CHANNEL_2GHZ:
-		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_2GHZ, AR5K_PHY(0));
-		break;
-	case CHANNEL_5GHZ:
-		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
-		break;
-	default:
-		return 0;
-	}
-
-	mdelay(2);
-
-	/* ...wait until PHY is ready and read the selected radio revision */
-	ath5k_hw_reg_write(ah, 0x00001c16, AR5K_PHY(0x34));
-
-	for (i = 0; i < 8; i++)
-		ath5k_hw_reg_write(ah, 0x00010000, AR5K_PHY(0x20));
-
-	if (ah->ah_version == AR5K_AR5210) {
-		srev = ath5k_hw_reg_read(ah, AR5K_PHY(256) >> 28) & 0xf;
-		ret = (u16)ath5k_hw_bitswap(srev, 4) + 1;
-	} else {
-		srev = (ath5k_hw_reg_read(ah, AR5K_PHY(0x100)) >> 24) & 0xff;
-		ret = (u16)ath5k_hw_bitswap(((srev & 0xf0) >> 4) |
-				((srev & 0x0f) << 4), 8);
-	}
-
-	/* Reset to the 5GHz mode */
-	ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
-
-	return ret;
-}
 
 /*****************\
 * Antenna control *
@@ -1822,7 +1916,8 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 	struct ieee80211_channel *channel = ah->ah_current_channel;
 	bool use_def_for_tx, update_def_on_tx, use_def_for_rts, fast_div;
 	bool use_def_for_sg;
-	u8 def_ant, tx_ant, ee_mode;
+	int ee_mode;
+	u8 def_ant, tx_ant;
 	u32 sta_id1 = 0;
 
 	/* if channel is not initialized yet we can't set the antennas
@@ -1834,20 +1929,8 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 
 	def_ant = ah->ah_def_ant;
 
-	switch (channel->hw_value & CHANNEL_MODES) {
-	case CHANNEL_A:
-	case CHANNEL_T:
-	case CHANNEL_XR:
-		ee_mode = AR5K_EEPROM_MODE_11A;
-		break;
-	case CHANNEL_G:
-	case CHANNEL_TG:
-		ee_mode = AR5K_EEPROM_MODE_11G;
-		break;
-	case CHANNEL_B:
-		ee_mode = AR5K_EEPROM_MODE_11B;
-		break;
-	default:
+	ee_mode = ath5k_eeprom_mode_from_channel(channel);
+	if (ee_mode < 0) {
 		ATH5K_ERR(ah->ah_sc,
 			"invalid channel: %d\n", channel->center_freq);
 		return;
@@ -2275,20 +2358,20 @@ ath5k_get_max_ctl_power(struct ath5k_hw *ah,
 
 	switch (channel->hw_value & CHANNEL_MODES) {
 	case CHANNEL_A:
-		ctl_mode |= AR5K_CTL_11A;
+		if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
+			ctl_mode |= AR5K_CTL_TURBO;
+		else
+			ctl_mode |= AR5K_CTL_11A;
 		break;
 	case CHANNEL_G:
-		ctl_mode |= AR5K_CTL_11G;
+		if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
+			ctl_mode |= AR5K_CTL_TURBOG;
+		else
+			ctl_mode |= AR5K_CTL_11G;
 		break;
 	case CHANNEL_B:
 		ctl_mode |= AR5K_CTL_11B;
 		break;
-	case CHANNEL_T:
-		ctl_mode |= AR5K_CTL_TURBO;
-		break;
-	case CHANNEL_TG:
-		ctl_mode |= AR5K_CTL_TURBOG;
-		break;
 	case CHANNEL_XR:
 		/* Fall through */
 	default:
@@ -2482,7 +2565,7 @@ ath5k_combine_linear_pcdac_curves(struct ath5k_hw *ah, s16* table_min,
 
 /* Write PCDAC values on hw */
 static void
-ath5k_setup_pcdac_table(struct ath5k_hw *ah)
+ath5k_write_pcdac_table(struct ath5k_hw *ah)
 {
 	u8 	*pcdac_out = ah->ah_txpower.txp_pd_table;
 	int	i;
@@ -2631,10 +2714,12 @@ ath5k_combine_pwr_to_pdadc_curves(struct ath5k_hw *ah,
 
 /* Write PDADC values on hw */
 static void
-ath5k_setup_pwr_to_pdadc_table(struct ath5k_hw *ah,
-			u8 pdcurves, u8 *pdg_to_idx)
+ath5k_write_pwr_to_pdadc_table(struct ath5k_hw *ah, u8 ee_mode)
 {
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
 	u8 *pdadc_out = ah->ah_txpower.txp_pd_table;
+	u8 *pdg_to_idx = ee->ee_pdc_to_idx[ee_mode];
+	u8 pdcurves = ee->ee_pd_gains[ee_mode];
 	u32 reg;
 	u8 i;
 
@@ -2844,8 +2929,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 					(s16) pcinfo_R->freq,
 					pcinfo_L->max_pwr, pcinfo_R->max_pwr);
 
-	/* We are ready to go, fill PCDAC/PDADC
-	 * table and write settings on hardware */
+	/* Fill PCDAC/PDADC table */
 	switch (type) {
 	case AR5K_PWRTABLE_LINEAR_PCDAC:
 		/* For RF5112 we can have one or two curves
@@ -2858,9 +2942,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 		 * match max power value with max
 		 * table index */
 		ah->ah_txpower.txp_offset = 64 - (table_max[0] / 2);
-
-		/* Write settings on hw */
-		ath5k_setup_pcdac_table(ah);
 		break;
 	case AR5K_PWRTABLE_PWR_TO_PCDAC:
 		/* We are done for RF5111 since it has only
@@ -2870,9 +2951,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 		/* No rate powertable adjustment for RF5111 */
 		ah->ah_txpower.txp_min_idx = 0;
 		ah->ah_txpower.txp_offset = 0;
-
-		/* Write settings on hw */
-		ath5k_setup_pcdac_table(ah);
 		break;
 	case AR5K_PWRTABLE_PWR_TO_PDADC:
 		/* Set PDADC boundaries and fill
@@ -2880,9 +2958,6 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 		ath5k_combine_pwr_to_pdadc_curves(ah, table_min, table_max,
 						ee->ee_pd_gains[ee_mode]);
 
-		/* Write settings on hw */
-		ath5k_setup_pwr_to_pdadc_table(ah, pdg, pdg_curve_to_idx);
-
 		/* Set txp.offset, note that table_min
 		 * can be negative */
 		ah->ah_txpower.txp_offset = table_min[0];
@@ -2891,9 +2966,20 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 		return -EINVAL;
 	}
 
+	ah->ah_txpower.txp_setup = true;
+
 	return 0;
 }
 
+/* Write power table for current channel to hw */
+static void
+ath5k_write_channel_powertable(struct ath5k_hw *ah, u8 ee_mode, u8 type)
+{
+	if (type == AR5K_PWRTABLE_PWR_TO_PDADC)
+		ath5k_write_pwr_to_pdadc_table(ah, ee_mode);
+	else
+		ath5k_write_pcdac_table(ah);
+}
 
 /*
  * Per-rate tx power setting
@@ -2982,7 +3068,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
 
 	/* Min/max in 0.25dB units */
 	ah->ah_txpower.txp_min_pwr = 2 * rates[7];
-	ah->ah_txpower.txp_max_pwr = 2 * rates[0];
+	ah->ah_txpower.txp_cur_pwr = 2 * rates[0];
 	ah->ah_txpower.txp_ofdm = rates[7];
 }
 
@@ -2990,11 +3076,13 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
 /*
  * Set transmission power
  */
-int
+static int
 ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
-		u8 ee_mode, u8 txpower)
+		 u8 txpower)
 {
 	struct ath5k_rate_pcal_info rate_info;
+	struct ieee80211_channel *curr_channel = ah->ah_current_channel;
+	int ee_mode;
 	u8 type;
 	int ret;
 
@@ -3003,14 +3091,18 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		return -EINVAL;
 	}
 
-	/* Reset TX power values */
-	memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
-	ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
-	ah->ah_txpower.txp_min_pwr = 0;
-	ah->ah_txpower.txp_max_pwr = AR5K_TUNE_MAX_TXPOWER;
+	ee_mode = ath5k_eeprom_mode_from_channel(channel);
+	if (ee_mode < 0) {
+		ATH5K_ERR(ah->ah_sc,
+			"invalid channel: %d\n", channel->center_freq);
+		return -EINVAL;
+	}
 
 	/* Initialize TX power table */
 	switch (ah->ah_radio) {
+	case AR5K_RF5110:
+		/* TODO */
+		return 0;
 	case AR5K_RF5111:
 		type = AR5K_PWRTABLE_PWR_TO_PCDAC;
 		break;
@@ -3028,10 +3120,26 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		return -EINVAL;
 	}
 
-	/* FIXME: Only on channel/mode change */
-	ret = ath5k_setup_channel_powertable(ah, channel, ee_mode, type);
-	if (ret)
-		return ret;
+	/*
+	 * If we don't change channel/mode skip tx powertable calculation
+	 * and use the cached one.
+	 */
+	if (!ah->ah_txpower.txp_setup ||
+	    (channel->hw_value != curr_channel->hw_value) ||
+	    (channel->center_freq != curr_channel->center_freq)) {
+		/* Reset TX power values */
+		memset(&ah->ah_txpower, 0, sizeof(ah->ah_txpower));
+		ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+
+		/* Calculate the powertable */
+		ret = ath5k_setup_channel_powertable(ah, channel,
+							ee_mode, type);
+		if (ret)
+			return ret;
+	}
+
+	/* Write table on hw */
+	ath5k_write_channel_powertable(ah, ee_mode, type);
 
 	/* Limit max power if we have a CTL available */
 	ath5k_get_max_ctl_power(ah, channel);
@@ -3086,31 +3194,219 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 
 int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
 {
-	/*Just a try M.F.*/
-	struct ieee80211_channel *channel = ah->ah_current_channel;
-	u8 ee_mode;
+	ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
+		"changing txpower to %d\n", txpower);
 
-	switch (channel->hw_value & CHANNEL_MODES) {
-	case CHANNEL_A:
-	case CHANNEL_T:
-	case CHANNEL_XR:
-		ee_mode = AR5K_EEPROM_MODE_11A;
-		break;
-	case CHANNEL_G:
-	case CHANNEL_TG:
-		ee_mode = AR5K_EEPROM_MODE_11G;
-		break;
-	case CHANNEL_B:
-		ee_mode = AR5K_EEPROM_MODE_11B;
-		break;
-	default:
-		ATH5K_ERR(ah->ah_sc,
-			"invalid channel: %d\n", channel->center_freq);
+	return ath5k_hw_txpower(ah, ah->ah_current_channel, txpower);
+}
+
+/*************\
+ Init function
+\*************/
+
+int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
+		      u8 mode, bool fast)
+{
+	struct ieee80211_channel *curr_channel;
+	int ret, i;
+	u32 phy_tst1;
+	ret = 0;
+
+	/*
+	 * Sanity check for fast flag
+	 * Don't try fast channel change when changing modulation
+	 * mode/band. We check for chip compatibility on
+	 * ath5k_hw_reset.
+	 */
+	curr_channel = ah->ah_current_channel;
+	if (fast && (channel->hw_value != curr_channel->hw_value))
 		return -EINVAL;
+
+	/*
+	 * On fast channel change we only set the synth parameters
+	 * while PHY is running, enable calibration and skip the rest.
+	 */
+	if (fast) {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
+				    AR5K_PHY_RFBUS_REQ_REQUEST);
+		for (i = 0; i < 100; i++) {
+			if (ath5k_hw_reg_read(ah, AR5K_PHY_RFBUS_GRANT))
+				break;
+			udelay(5);
+		}
+		/* Failed */
+		if (i >= 100)
+			return -EIO;
 	}
 
-	ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
-		"changing txpower to %d\n", txpower);
+	/*
+	 * Set TX power
+	 *
+	 * Note: We need to do that before we set
+	 * RF buffer settings on 5211/5212+ so that we
+	 * properly set curve indices.
+	 */
+	ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_cur_pwr ?
+			ah->ah_txpower.txp_cur_pwr / 2 : AR5K_TUNE_MAX_TXPOWER);
+	if (ret)
+		return ret;
+
+	/*
+	 * For 5210 we do all initialization using
+	 * initvals, so we don't have to modify
+	 * any settings (5210 also only supports
+	 * a/aturbo modes)
+	 */
+	if ((ah->ah_version != AR5K_AR5210) && !fast) {
+
+		/*
+		 * Write initial RF gain settings
+		 * This should work for both 5111/5112
+		 */
+		ret = ath5k_hw_rfgain_init(ah, channel->band);
+		if (ret)
+			return ret;
+
+		mdelay(1);
+
+		/*
+		 * Write RF buffer
+		 */
+		ret = ath5k_hw_rfregs_init(ah, channel, mode);
+		if (ret)
+			return ret;
+
+		/* Write OFDM timings on 5212*/
+		if (ah->ah_version == AR5K_AR5212 &&
+			channel->hw_value & CHANNEL_OFDM) {
+
+			ret = ath5k_hw_write_ofdm_timings(ah, channel);
+			if (ret)
+				return ret;
+
+			/* Spur info is available only from EEPROM versions
+			 * greater than 5.3, but the EEPROM routines will use
+			 * static values for older versions */
+			if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
+				ath5k_hw_set_spur_mitigation_filter(ah,
+								    channel);
+		}
+
+		/*Enable/disable 802.11b mode on 5111
+		(enable 2111 frequency converter + CCK)*/
+		if (ah->ah_radio == AR5K_RF5111) {
+			if (mode == AR5K_MODE_11B)
+				AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
+				    AR5K_TXCFG_B_MODE);
+			else
+				AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+				    AR5K_TXCFG_B_MODE);
+		}
+
+	} else if (ah->ah_version == AR5K_AR5210) {
+		mdelay(1);
+		/* Disable phy and wait */
+		ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+		mdelay(1);
+	}
+
+	/* Set channel on PHY */
+	ret = ath5k_hw_channel(ah, channel);
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable the PHY and wait until completion
+	 * This includes BaseBand and Synthesizer
+	 * activation.
+	 */
+	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+
+	/*
+	 * On 5211+ read activation -> rx delay
+	 * and use it.
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		u32 delay;
+		delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+			AR5K_PHY_RX_DELAY_M;
+		delay = (channel->hw_value & CHANNEL_CCK) ?
+			((delay << 2) / 22) : (delay / 10);
+		if (ah->ah_bwmode == AR5K_BWMODE_10MHZ)
+			delay = delay << 1;
+		if (ah->ah_bwmode == AR5K_BWMODE_5MHZ)
+			delay = delay << 2;
+		/* XXX: /2 on turbo ? Let's be safe
+		 * for now */
+		udelay(100 + delay);
+	} else {
+		mdelay(1);
+	}
+
+	if (fast)
+		/*
+		 * Release RF Bus grant
+		 */
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
+				    AR5K_PHY_RFBUS_REQ_REQUEST);
+	else {
+		/*
+		 * Perform ADC test to see if baseband is ready
+		 * Set tx hold and check adc test register
+		 */
+		phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+		ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+		for (i = 0; i <= 20; i++) {
+			if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+				break;
+			udelay(200);
+		}
+		ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
+	}
+
+	/*
+	 * Start automatic gain control calibration
+	 *
+	 * During AGC calibration RX path is re-routed to
+	 * a power detector so we don't receive anything.
+	 *
+	 * This method is used to calibrate some static offsets
+	 * used together with on-the fly I/Q calibration (the
+	 * one performed via ath5k_hw_phy_calibrate), which doesn't
+	 * interrupt rx path.
+	 *
+	 * While rx path is re-routed to the power detector we also
+	 * start a noise floor calibration to measure the
+	 * card's noise floor (the noise we measure when we are not
+	 * transmitting or receiving anything).
+	 *
+	 * If we are in a noisy environment, AGC calibration may time
+	 * out and/or noise floor calibration might timeout.
+	 */
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+				AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF);
+
+	/* At the same time start I/Q calibration for QAM constellation
+	 * -no need for CCK- */
+	ah->ah_calibration = false;
+	if (!(mode == AR5K_MODE_11B)) {
+		ah->ah_calibration = true;
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_RUN);
+	}
+
+	/* Wait for gain calibration to finish (we check for I/Q calibration
+	 * during ath5k_phy_calibrate) */
+	if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+			AR5K_PHY_AGCCTL_CAL, 0, false)) {
+		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
+			channel->center_freq);
+	}
+
+	/* Restore antenna mode */
+	ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
 
-	return ath5k_hw_txpower(ah, channel, ee_mode, txpower);
+	return ret;
 }
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 84c717ded1c..2c9c9e793d4 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -25,14 +25,52 @@ Queue Control Unit, DFS Control Unit Functions
 #include "debug.h"
 #include "base.h"
 
+
+/******************\
+* Helper functions *
+\******************/
+
 /*
- * Get properties for a transmit queue
+ * Get number of pending frames
+ * for a specific queue [5211+]
  */
-int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
-		struct ath5k_txq_info *queue_info)
+u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
 {
-	memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
-	return 0;
+	u32 pending;
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/* Return if queue is declared inactive */
+	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return false;
+
+	/* XXX: How about AR5K_CFG_TXCNT ? */
+	if (ah->ah_version == AR5K_AR5210)
+		return false;
+
+	pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue));
+	pending &= AR5K_QCU_STS_FRMPENDCNT;
+
+	/* It's possible to have no frames pending even if TXE
+	 * is set. To indicate that q has not stopped return
+	 * true */
+	if (!pending && AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+		return true;
+
+	return pending;
+}
+
+/*
+ * Set a transmit queue inactive
+ */
+void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+	if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
+		return;
+
+	/* This queue will be skipped in further operations */
+	ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
+	/*For SIMR setup*/
+	AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
 }
 
 /*
@@ -50,6 +88,16 @@ static u16 ath5k_cw_validate(u16 cw_req)
 }
 
 /*
+ * Get properties for a transmit queue
+ */
+int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
+		struct ath5k_txq_info *queue_info)
+{
+	memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
+	return 0;
+}
+
+/*
  * Set properties for a transmit queue
  */
 int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
@@ -104,8 +152,8 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
 	/*
 	 * Get queue by type
 	 */
-	/*5210 only has 2 queues*/
-	if (ah->ah_version == AR5K_AR5210) {
+	/* 5210 only has 2 queues */
+	if (ah->ah_capabilities.cap_queues.q_tx_num == 2) {
 		switch (queue_type) {
 		case AR5K_TX_QUEUE_DATA:
 			queue = AR5K_TX_QUEUE_ID_NOQCU_DATA;
@@ -172,113 +220,18 @@ int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
 	return queue;
 }
 
-/*
- * Get number of pending frames
- * for a specific queue [5211+]
- */
-u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
-{
-	u32 pending;
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/* Return if queue is declared inactive */
-	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return false;
-
-	/* XXX: How about AR5K_CFG_TXCNT ? */
-	if (ah->ah_version == AR5K_AR5210)
-		return false;
-
-	pending = ath5k_hw_reg_read(ah, AR5K_QUEUE_STATUS(queue));
-	pending &= AR5K_QCU_STS_FRMPENDCNT;
-
-	/* It's possible to have no frames pending even if TXE
-	 * is set. To indicate that q has not stopped return
-	 * true */
-	if (!pending && AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
-		return true;
-
-	return pending;
-}
-
-/*
- * Set a transmit queue inactive
- */
-void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
-{
-	if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
-		return;
 
-	/* This queue will be skipped in further operations */
-	ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
-	/*For SIMR setup*/
-	AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
-}
+/*******************************\
+* Single QCU/DCU initialization *
+\*******************************/
 
 /*
- * Set DFS properties for a transmit queue on DCU
+ * Set tx retry limits on DCU
  */
-int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+static void ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah,
+					unsigned int queue)
 {
 	u32 retry_lg, retry_sh;
-	struct ath5k_txq_info *tq = &ah->ah_txq[queue];
-
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	tq = &ah->ah_txq[queue];
-
-	if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return 0;
-
-	if (ah->ah_version == AR5K_AR5210) {
-		/* Only handle data queues, others will be ignored */
-		if (tq->tqi_type != AR5K_TX_QUEUE_DATA)
-			return 0;
-
-		/* Set Slot time */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME,
-			AR5K_SLOT_TIME);
-		/* Set ACK_CTS timeout */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_ACK_CTS_TIMEOUT_TURBO :
-			AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME);
-		/* Set Transmit Latency */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_TRANSMIT_LATENCY_TURBO :
-			AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210);
-
-		/* Set IFS0 */
-		if (ah->ah_turbo) {
-			 ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO +
-				tq->tqi_aifs * AR5K_INIT_SLOT_TIME_TURBO) <<
-				AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO,
-				AR5K_IFS0);
-		} else {
-			ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS +
-				tq->tqi_aifs * AR5K_INIT_SLOT_TIME) <<
-				AR5K_IFS0_DIFS_S) |
-				AR5K_INIT_SIFS, AR5K_IFS0);
-		}
-
-		/* Set IFS1 */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
-			AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
-		/* Set AR5K_PHY_SETTLING */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
-			| 0x38 :
-			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
-			| 0x1C,
-			AR5K_PHY_SETTLING);
-		/* Set Frame Control Register */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			(AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
-			AR5K_PHY_TURBO_SHORT | 0x2020) :
-			(AR5K_PHY_FRAME_CTL_INI | 0x1020),
-			AR5K_PHY_FRAME_CTL_5210);
-	}
 
 	/*
 	 * Calculate and set retry limits
@@ -293,8 +246,13 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 		retry_sh = AR5K_INIT_SH_RETRY;
 	}
 
-	/*No QCU/DCU [5210]*/
+	/* Single data queue on AR5210 */
 	if (ah->ah_version == AR5K_AR5210) {
+		struct ath5k_txq_info *tq = &ah->ah_txq[queue];
+
+		if (queue > 0)
+			return;
+
 		ath5k_hw_reg_write(ah,
 			(tq->tqi_cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S)
 			| AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
@@ -304,8 +262,8 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 			| AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY)
 			| AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY),
 			AR5K_NODCU_RETRY_LMT);
+	/* DCU on AR5211+ */
 	} else {
-		/*QCU/DCU [5211+]*/
 		ath5k_hw_reg_write(ah,
 			AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
 				AR5K_DCU_RETRY_LMT_SLG_RETRY) |
@@ -314,219 +272,393 @@ int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
 			AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) |
 			AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY),
 			AR5K_QUEUE_DFS_RETRY_LIMIT(queue));
+	}
+	return;
+}
 
-	/*===Rest is also for QCU/DCU only [5211+]===*/
+/**
+ * ath5k_hw_reset_tx_queue - Initialize a single hw queue
+ *
+ * @ah The &struct ath5k_hw
+ * @queue The hw queue number
+ *
+ * Set DFS properties for the given transmit queue on DCU
+ * and configures all queue-specific parameters.
+ */
+int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+	struct ath5k_txq_info *tq = &ah->ah_txq[queue];
 
-		/*
-		 * Set contention window (cw_min/cw_max)
-		 * and arbitrated interframe space (aifs)...
-		 */
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM(tq->tqi_cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
-			AR5K_REG_SM(tq->tqi_cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
-			AR5K_REG_SM(tq->tqi_aifs, AR5K_DCU_LCL_IFS_AIFS),
-			AR5K_QUEUE_DFS_LOCAL_IFS(queue));
-
-		/*
-		 * Set misc registers
-		 */
-		/* Enable DCU early termination for this queue */
-		AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-					AR5K_QCU_MISC_DCU_EARLY);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	tq = &ah->ah_txq[queue];
+
+	/* Skip if queue inactive or if we are on AR5210
+	 * that doesn't have QCU/DCU */
+	if ((ah->ah_version == AR5K_AR5210) ||
+	(tq->tqi_type == AR5K_TX_QUEUE_INACTIVE))
+		return 0;
+
+	/*
+	 * Set contention window (cw_min/cw_max)
+	 * and arbitrated interframe space (aifs)...
+	 */
+	ath5k_hw_reg_write(ah,
+		AR5K_REG_SM(tq->tqi_cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
+		AR5K_REG_SM(tq->tqi_cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
+		AR5K_REG_SM(tq->tqi_aifs, AR5K_DCU_LCL_IFS_AIFS),
+		AR5K_QUEUE_DFS_LOCAL_IFS(queue));
+
+	/*
+	 * Set tx retry limits for this queue
+	 */
+	ath5k_hw_set_tx_retry_limits(ah, queue);
+
+
+	/*
+	 * Set misc registers
+	 */
+
+	/* Enable DCU to wait for next fragment from QCU */
+	AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+				AR5K_DCU_MISC_FRAG_WAIT);
 
-		/* Enable DCU to wait for next fragment from QCU */
+	/* On Maui and Spirit use the global seqnum on DCU */
+	if (ah->ah_mac_version < AR5K_SREV_AR5211)
 		AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
-					AR5K_DCU_MISC_FRAG_WAIT);
-
-		/* On Maui and Spirit use the global seqnum on DCU */
-		if (ah->ah_mac_version < AR5K_SREV_AR5211)
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
-						AR5K_DCU_MISC_SEQNUM_CTL);
-
-		if (tq->tqi_cbr_period) {
-			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
-				AR5K_QCU_CBRCFG_INTVAL) |
-				AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
-				AR5K_QCU_CBRCFG_ORN_THRES),
-				AR5K_QUEUE_CBRCFG(queue));
+					AR5K_DCU_MISC_SEQNUM_CTL);
+
+	/* Constant bit rate period */
+	if (tq->tqi_cbr_period) {
+		ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
+					AR5K_QCU_CBRCFG_INTVAL) |
+					AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
+					AR5K_QCU_CBRCFG_ORN_THRES),
+					AR5K_QUEUE_CBRCFG(queue));
+
+		AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+					AR5K_QCU_MISC_FRSHED_CBR);
+
+		if (tq->tqi_cbr_overflow_limit)
 			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_CBR);
-			if (tq->tqi_cbr_overflow_limit)
-				AR5K_REG_ENABLE_BITS(ah,
-					AR5K_QUEUE_MISC(queue),
 					AR5K_QCU_MISC_CBR_THRES_ENABLE);
-		}
+	}
 
-		if (tq->tqi_ready_time &&
-		(tq->tqi_type != AR5K_TX_QUEUE_CAB))
-			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
-				AR5K_QCU_RDYTIMECFG_INTVAL) |
-				AR5K_QCU_RDYTIMECFG_ENABLE,
-				AR5K_QUEUE_RDYTIMECFG(queue));
-
-		if (tq->tqi_burst_time) {
-			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
-				AR5K_DCU_CHAN_TIME_DUR) |
-				AR5K_DCU_CHAN_TIME_ENABLE,
-				AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
-
-			if (tq->tqi_flags
-			& AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
-				AR5K_REG_ENABLE_BITS(ah,
-					AR5K_QUEUE_MISC(queue),
+	/* Ready time interval */
+	if (tq->tqi_ready_time && (tq->tqi_type != AR5K_TX_QUEUE_CAB))
+		ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
+					AR5K_QCU_RDYTIMECFG_INTVAL) |
+					AR5K_QCU_RDYTIMECFG_ENABLE,
+					AR5K_QUEUE_RDYTIMECFG(queue));
+
+	if (tq->tqi_burst_time) {
+		ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
+					AR5K_DCU_CHAN_TIME_DUR) |
+					AR5K_DCU_CHAN_TIME_ENABLE,
+					AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
 					AR5K_QCU_MISC_RDY_VEOL_POLICY);
-		}
+	}
 
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
-			ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
-				AR5K_QUEUE_DFS_MISC(queue));
+	/* Enable/disable Post frame backoff */
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
+		ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
+					AR5K_QUEUE_DFS_MISC(queue));
 
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
-			ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
-				AR5K_QUEUE_DFS_MISC(queue));
+	/* Enable/disable fragmentation burst backoff */
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
+		ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
+					AR5K_QUEUE_DFS_MISC(queue));
 
-		/*
-		 * Set registers by queue type
-		 */
-		switch (tq->tqi_type) {
-		case AR5K_TX_QUEUE_BEACON:
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+	/*
+	 * Set registers by queue type
+	 */
+	switch (tq->tqi_type) {
+	case AR5K_TX_QUEUE_BEACON:
+		AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
 				AR5K_QCU_MISC_FRSHED_DBA_GT |
 				AR5K_QCU_MISC_CBREXP_BCN_DIS |
 				AR5K_QCU_MISC_BCN_ENABLE);
 
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+		AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
 				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
 				AR5K_DCU_MISC_ARBLOCK_CTL_S) |
 				AR5K_DCU_MISC_ARBLOCK_IGNORE |
 				AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
 				AR5K_DCU_MISC_BCN_ENABLE);
-			break;
+		break;
 
-		case AR5K_TX_QUEUE_CAB:
-			/* XXX: use BCN_SENT_GT, if we can figure out how */
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_DBA_GT |
-				AR5K_QCU_MISC_CBREXP_DIS |
-				AR5K_QCU_MISC_CBREXP_BCN_DIS);
+	case AR5K_TX_QUEUE_CAB:
+		/* XXX: use BCN_SENT_GT, if we can figure out how */
+		AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+					AR5K_QCU_MISC_FRSHED_DBA_GT |
+					AR5K_QCU_MISC_CBREXP_DIS |
+					AR5K_QCU_MISC_CBREXP_BCN_DIS);
 
-			ath5k_hw_reg_write(ah, ((tq->tqi_ready_time -
-				(AR5K_TUNE_SW_BEACON_RESP -
-				AR5K_TUNE_DMA_BEACON_RESP) -
+		ath5k_hw_reg_write(ah, ((tq->tqi_ready_time -
+					(AR5K_TUNE_SW_BEACON_RESP -
+					AR5K_TUNE_DMA_BEACON_RESP) -
 				AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
-				AR5K_QCU_RDYTIMECFG_ENABLE,
-				AR5K_QUEUE_RDYTIMECFG(queue));
+					AR5K_QCU_RDYTIMECFG_ENABLE,
+					AR5K_QUEUE_RDYTIMECFG(queue));
 
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
-				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
-				AR5K_DCU_MISC_ARBLOCK_CTL_S));
-			break;
+		AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+					(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+					AR5K_DCU_MISC_ARBLOCK_CTL_S));
+		break;
 
-		case AR5K_TX_QUEUE_UAPSD:
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_CBREXP_DIS);
-			break;
+	case AR5K_TX_QUEUE_UAPSD:
+		AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+					AR5K_QCU_MISC_CBREXP_DIS);
+		break;
 
-		case AR5K_TX_QUEUE_DATA:
-		default:
+	case AR5K_TX_QUEUE_DATA:
+	default:
 			break;
-		}
-
-		/* TODO: Handle frame compression */
-
-		/*
-		 * Enable interrupts for this tx queue
-		 * in the secondary interrupt mask registers
-		 */
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRORNINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrorn, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRURNINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrurn, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_QTRIGINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_qtrig, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_nofrm, queue);
-
-		/* Update secondary interrupt mask registers */
-
-		/* Filter out inactive queues */
-		ah->ah_txq_imr_txok &= ah->ah_txq_status;
-		ah->ah_txq_imr_txerr &= ah->ah_txq_status;
-		ah->ah_txq_imr_txurn &= ah->ah_txq_status;
-		ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
-		ah->ah_txq_imr_txeol &= ah->ah_txq_status;
-		ah->ah_txq_imr_cbrorn &= ah->ah_txq_status;
-		ah->ah_txq_imr_cbrurn &= ah->ah_txq_status;
-		ah->ah_txq_imr_qtrig &= ah->ah_txq_status;
-		ah->ah_txq_imr_nofrm &= ah->ah_txq_status;
-
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
-			AR5K_SIMR0_QCU_TXOK) |
-			AR5K_REG_SM(ah->ah_txq_imr_txdesc,
-			AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0);
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
-			AR5K_SIMR1_QCU_TXERR) |
-			AR5K_REG_SM(ah->ah_txq_imr_txeol,
-			AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1);
-		/* Update simr2 but don't overwrite rest simr2 settings */
-		AR5K_REG_DISABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_QCU_TXURN);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2,
-			AR5K_REG_SM(ah->ah_txq_imr_txurn,
-			AR5K_SIMR2_QCU_TXURN));
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_cbrorn,
-			AR5K_SIMR3_QCBRORN) |
-			AR5K_REG_SM(ah->ah_txq_imr_cbrurn,
-			AR5K_SIMR3_QCBRURN), AR5K_SIMR3);
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_qtrig,
-			AR5K_SIMR4_QTRIG), AR5K_SIMR4);
-		/* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_nofrm,
-			AR5K_TXNOFRM_QCU), AR5K_TXNOFRM);
-		/* No queue has TXNOFRM enabled, disable the interrupt
-		 * by setting AR5K_TXNOFRM to zero */
-		if (ah->ah_txq_imr_nofrm == 0)
-			ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM);
-
-		/* Set QCU mask for this DCU to save power */
-		AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(queue), queue);
 	}
 
+	/* TODO: Handle frame compression */
+
+	/*
+	 * Enable interrupts for this tx queue
+	 * in the secondary interrupt mask registers
+	 */
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
+		AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
+
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
+		AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
+
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
+		AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
+
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
+		AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
+
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
+		AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
+
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRORNINT_ENABLE)
+		AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrorn, queue);
+
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_CBRURNINT_ENABLE)
+		AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_cbrurn, queue);
+
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_QTRIGINT_ENABLE)
+		AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_qtrig, queue);
+
+	if (tq->tqi_flags & AR5K_TXQ_FLAG_TXNOFRMINT_ENABLE)
+		AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_nofrm, queue);
+
+	/* Update secondary interrupt mask registers */
+
+	/* Filter out inactive queues */
+	ah->ah_txq_imr_txok &= ah->ah_txq_status;
+	ah->ah_txq_imr_txerr &= ah->ah_txq_status;
+	ah->ah_txq_imr_txurn &= ah->ah_txq_status;
+	ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
+	ah->ah_txq_imr_txeol &= ah->ah_txq_status;
+	ah->ah_txq_imr_cbrorn &= ah->ah_txq_status;
+	ah->ah_txq_imr_cbrurn &= ah->ah_txq_status;
+	ah->ah_txq_imr_qtrig &= ah->ah_txq_status;
+	ah->ah_txq_imr_nofrm &= ah->ah_txq_status;
+
+	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
+					AR5K_SIMR0_QCU_TXOK) |
+					AR5K_REG_SM(ah->ah_txq_imr_txdesc,
+					AR5K_SIMR0_QCU_TXDESC),
+					AR5K_SIMR0);
+
+	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
+					AR5K_SIMR1_QCU_TXERR) |
+					AR5K_REG_SM(ah->ah_txq_imr_txeol,
+					AR5K_SIMR1_QCU_TXEOL),
+					AR5K_SIMR1);
+
+	/* Update SIMR2 but don't overwrite rest simr2 settings */
+	AR5K_REG_DISABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_QCU_TXURN);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2,
+				AR5K_REG_SM(ah->ah_txq_imr_txurn,
+				AR5K_SIMR2_QCU_TXURN));
+
+	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_cbrorn,
+				AR5K_SIMR3_QCBRORN) |
+				AR5K_REG_SM(ah->ah_txq_imr_cbrurn,
+				AR5K_SIMR3_QCBRURN),
+				AR5K_SIMR3);
+
+	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_qtrig,
+				AR5K_SIMR4_QTRIG), AR5K_SIMR4);
+
+	/* Set TXNOFRM_QCU for the queues with TXNOFRM enabled */
+	ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_nofrm,
+				AR5K_TXNOFRM_QCU), AR5K_TXNOFRM);
+
+	/* No queue has TXNOFRM enabled, disable the interrupt
+	 * by setting AR5K_TXNOFRM to zero */
+	if (ah->ah_txq_imr_nofrm == 0)
+		ath5k_hw_reg_write(ah, 0, AR5K_TXNOFRM);
+
+	/* Set QCU mask for this DCU to save power */
+	AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(queue), queue);
+
 	return 0;
 }
 
-/*
- * Set slot time on DCU
+
+/**************************\
+* Global QCU/DCU functions *
+\**************************/
+
+/**
+ * ath5k_hw_set_ifs_intervals  - Set global inter-frame spaces on DCU
+ *
+ * @ah The &struct ath5k_hw
+ * @slot_time Slot time in us
+ *
+ * Sets the global IFS intervals on DCU (also works on AR5210) for
+ * the given slot time and the current bwmode.
  */
-int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
+int ath5k_hw_set_ifs_intervals(struct ath5k_hw *ah, unsigned int slot_time)
 {
+	struct ieee80211_channel *channel = ah->ah_current_channel;
+	struct ath5k_softc *sc = ah->ah_sc;
+	struct ieee80211_rate *rate;
+	u32 ack_tx_time, eifs, eifs_clock, sifs, sifs_clock;
 	u32 slot_time_clock = ath5k_hw_htoclock(ah, slot_time);
 
 	if (slot_time < 6 || slot_time_clock > AR5K_SLOT_TIME_MAX)
 		return -EINVAL;
 
-	if (ah->ah_version == AR5K_AR5210)
-		ath5k_hw_reg_write(ah, slot_time_clock, AR5K_SLOT_TIME);
+	sifs = ath5k_hw_get_default_sifs(ah);
+	sifs_clock = ath5k_hw_htoclock(ah, sifs);
+
+	/* EIFS
+	 * Txtime of ack at lowest rate + SIFS + DIFS
+	 * (DIFS = SIFS + 2 * Slot time)
+	 *
+	 * Note: HAL has some predefined values for EIFS
+	 * Turbo:   (37 + 2 * 6)
+	 * Default: (74 + 2 * 9)
+	 * Half:    (149 + 2 * 13)
+	 * Quarter: (298 + 2 * 21)
+	 *
+	 * (74 + 2 * 6) for AR5210 default and turbo !
+	 *
+	 * According to the formula we have
+	 * ack_tx_time = 25 for turbo and
+	 * ack_tx_time = 42.5 * clock multiplier
+	 * for default/half/quarter.
+	 *
+	 * This can't be right, 42 is what we would get
+	 * from ath5k_hw_get_frame_dur_for_bwmode or
+	 * ieee80211_generic_frame_duration for zero frame
+	 * length and without SIFS !
+	 *
+	 * Also we have different lowest rate for 802.11a
+	 */
+	if (channel->hw_value & CHANNEL_5GHZ)
+		rate = &sc->sbands[IEEE80211_BAND_5GHZ].bitrates[0];
 	else
-		ath5k_hw_reg_write(ah, slot_time_clock, AR5K_DCU_GBL_IFS_SLOT);
+		rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[0];
+
+	ack_tx_time = ath5k_hw_get_frame_duration(ah, 10, rate);
+
+	/* ack_tx_time includes an SIFS already */
+	eifs = ack_tx_time + sifs + 2 * slot_time;
+	eifs_clock = ath5k_hw_htoclock(ah, eifs);
+
+	/* Set IFS settings on AR5210 */
+	if (ah->ah_version == AR5K_AR5210) {
+		u32 pifs, pifs_clock, difs, difs_clock;
+
+		/* Set slot time */
+		ath5k_hw_reg_write(ah, slot_time_clock, AR5K_SLOT_TIME);
+
+		/* Set EIFS */
+		eifs_clock = AR5K_REG_SM(eifs_clock, AR5K_IFS1_EIFS);
+
+		/* PIFS = Slot time + SIFS */
+		pifs = slot_time + sifs;
+		pifs_clock = ath5k_hw_htoclock(ah, pifs);
+		pifs_clock = AR5K_REG_SM(pifs_clock, AR5K_IFS1_PIFS);
+
+		/* DIFS = SIFS + 2 * Slot time */
+		difs = sifs + 2 * slot_time;
+		difs_clock = ath5k_hw_htoclock(ah, difs);
+
+		/* Set SIFS/DIFS */
+		ath5k_hw_reg_write(ah, (difs_clock <<
+				AR5K_IFS0_DIFS_S) | sifs_clock,
+				AR5K_IFS0);
+
+		/* Set PIFS/EIFS and preserve AR5K_INIT_CARR_SENSE_EN */
+		ath5k_hw_reg_write(ah, pifs_clock | eifs_clock |
+				(AR5K_INIT_CARR_SENSE_EN << AR5K_IFS1_CS_EN_S),
+				AR5K_IFS1);
+
+		return 0;
+	}
+
+	/* Set IFS slot time */
+	ath5k_hw_reg_write(ah, slot_time_clock, AR5K_DCU_GBL_IFS_SLOT);
+
+	/* Set EIFS interval */
+	ath5k_hw_reg_write(ah, eifs_clock, AR5K_DCU_GBL_IFS_EIFS);
+
+	/* Set SIFS interval in usecs */
+	AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC,
+				AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC,
+				sifs);
+
+	/* Set SIFS interval in clock cycles */
+	ath5k_hw_reg_write(ah, sifs_clock, AR5K_DCU_GBL_IFS_SIFS);
 
 	return 0;
 }
 
+
+int ath5k_hw_init_queues(struct ath5k_hw *ah)
+{
+	int i, ret;
+
+	/* TODO: HW Compression support for data queues */
+	/* TODO: Burst prefetch for data queues */
+
+	/*
+	 * Reset queues and start beacon timers at the end of the reset routine
+	 * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping
+	 * Note: If we want we can assign multiple qcus on one dcu.
+	 */
+	if (ah->ah_version != AR5K_AR5210)
+		for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
+			ret = ath5k_hw_reset_tx_queue(ah, i);
+			if (ret) {
+				ATH5K_ERR(ah->ah_sc,
+					"failed to reset TX queue #%d\n", i);
+				return ret;
+			}
+		}
+	else
+		/* No QCU/DCU on AR5210, just set tx
+		 * retry limits. We set IFS parameters
+		 * on ath5k_hw_set_ifs_intervals */
+		ath5k_hw_set_tx_retry_limits(ah, 0);
+
+	/* Set the turbo flag when operating on 40MHz */
+	if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
+		AR5K_REG_ENABLE_BITS(ah, AR5K_DCU_GBL_IFS_MISC,
+				AR5K_DCU_GBL_IFS_MISC_TURBO_MODE);
+
+	/* If we didn't set IFS timings through
+	 * ath5k_hw_set_coverage_class make sure
+	 * we set them here */
+	if (!ah->ah_coverage_class) {
+		unsigned int slot_time = ath5k_hw_get_default_slottime(ah);
+		ath5k_hw_set_ifs_intervals(ah, slot_time);
+	}
+
+	return 0;
+}
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index ca79ecd832f..7ad05d401ab 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -787,6 +787,7 @@
 #define	AR5K_DCU_GBL_IFS_MISC_LFSR_SLICE	0x00000007	/* LFSR Slice Select */
 #define	AR5K_DCU_GBL_IFS_MISC_TURBO_MODE	0x00000008	/* Turbo mode */
 #define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC	0x000003f0	/* SIFS Duration mask */
+#define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC_S	4
 #define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR		0x000ffc00	/* USEC Duration mask */
 #define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S	10
 #define	AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY	0x00300000	/* DCU Arbiter delay mask */
@@ -1311,7 +1312,7 @@
 #define AR5K_IFS1_EIFS		0x03fff000
 #define AR5K_IFS1_EIFS_S	12
 #define AR5K_IFS1_CS_EN		0x04000000
-
+#define AR5K_IFS1_CS_EN_S	26
 
 /*
  * CFP duration register
@@ -2058,6 +2059,7 @@
 
 #define AR5K_PHY_SCAL			0x9878
 #define AR5K_PHY_SCAL_32MHZ		0x0000000e
+#define	AR5K_PHY_SCAL_32MHZ_5311	0x00000008
 #define	AR5K_PHY_SCAL_32MHZ_2417	0x0000000a
 #define	AR5K_PHY_SCAL_32MHZ_HB63	0x00000032
 
@@ -2244,6 +2246,8 @@
 #define	AR5K_PHY_FRAME_CTL		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_PHY_FRAME_CTL_5210 : AR5K_PHY_FRAME_CTL_5211)
 /*---[5111+]---*/
+#define	AR5K_PHY_FRAME_CTL_WIN_LEN	0x00000003	/* Force window length (?) */
+#define	AR5K_PHY_FRAME_CTL_WIN_LEN_S	0
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP	0x00000038	/* Mask for tx clip (?) */
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP_S	3
 #define	AR5K_PHY_FRAME_CTL_PREP_CHINFO	0x00010000	/* Prepend chan info */
@@ -2558,3 +2562,28 @@
  */
 #define AR5K_PHY_PDADC_TXPOWER_BASE	0xa280
 #define	AR5K_PHY_PDADC_TXPOWER(_n)	(AR5K_PHY_PDADC_TXPOWER_BASE + ((_n) << 2))
+
+/*
+ * Platform registers for WiSoC
+ */
+#define AR5K_AR5312_RESET		0xbc003020
+#define AR5K_AR5312_RESET_BB0_COLD	0x00000004
+#define AR5K_AR5312_RESET_BB1_COLD	0x00000200
+#define AR5K_AR5312_RESET_WMAC0		0x00002000
+#define AR5K_AR5312_RESET_BB0_WARM	0x00004000
+#define AR5K_AR5312_RESET_WMAC1		0x00020000
+#define AR5K_AR5312_RESET_BB1_WARM	0x00040000
+
+#define AR5K_AR5312_ENABLE		0xbc003080
+#define AR5K_AR5312_ENABLE_WLAN0    0x00000001
+#define AR5K_AR5312_ENABLE_WLAN1    0x00000008
+
+#define AR5K_AR2315_RESET		0xb1000004
+#define AR5K_AR2315_RESET_WMAC		0x00000001
+#define AR5K_AR2315_RESET_BB_WARM	0x00000002
+
+#define AR5K_AR2315_AHB_ARB_CTL		0xb1000008
+#define AR5K_AR2315_AHB_ARB_CTL_WLAN	0x00000002
+
+#define AR5K_AR2315_BYTESWAP	0xb100000c
+#define AR5K_AR2315_BYTESWAP_WMAC	0x00000002
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 5b179d01f97..84206898f77 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -27,11 +27,17 @@
 
 #include <linux/pci.h> 		/* To determine if a card is pci-e */
 #include <linux/log2.h>
+#include <linux/platform_device.h>
 #include "ath5k.h"
 #include "reg.h"
 #include "base.h"
 #include "debug.h"
 
+
+/******************\
+* Helper functions *
+\******************/
+
 /*
  * Check if a register write has been completed
  */
@@ -53,146 +59,267 @@ int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
 	return (i <= 0) ? -EAGAIN : 0;
 }
 
+
+/*************************\
+* Clock related functions *
+\*************************/
+
 /**
- * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
+ * ath5k_hw_htoclock - Translate usec to hw clock units
  *
- * @ah: the &struct ath5k_hw
- * @channel: the currently set channel upon reset
- *
- * Write the delta slope coefficient (used on pilot tracking ?) for OFDM
- * operation on the AR5212 upon reset. This is a helper for ath5k_hw_reset().
+ * @ah: The &struct ath5k_hw
+ * @usec: value in microseconds
+ */
+unsigned int ath5k_hw_htoclock(struct ath5k_hw *ah, unsigned int usec)
+{
+	struct ath_common *common = ath5k_hw_common(ah);
+	return usec * common->clockrate;
+}
+
+/**
+ * ath5k_hw_clocktoh - Translate hw clock units to usec
+ * @clock: value in hw clock units
+ */
+unsigned int ath5k_hw_clocktoh(struct ath5k_hw *ah, unsigned int clock)
+{
+	struct ath_common *common = ath5k_hw_common(ah);
+	return clock / common->clockrate;
+}
+
+/**
+ * ath5k_hw_init_core_clock - Initialize core clock
  *
- * Since delta slope is floating point we split it on its exponent and
- * mantissa and provide these values on hw.
+ * @ah The &struct ath5k_hw
  *
- * For more infos i think this patent is related
- * http://www.freepatentsonline.com/7184495.html
+ * Initialize core clock parameters (usec, usec32, latencies etc).
  */
-static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
-	struct ieee80211_channel *channel)
+static void ath5k_hw_init_core_clock(struct ath5k_hw *ah)
 {
-	/* Get exponent and mantissa and set it */
-	u32 coef_scaled, coef_exp, coef_man,
-		ds_coef_exp, ds_coef_man, clock;
-
-	BUG_ON(!(ah->ah_version == AR5K_AR5212) ||
-		!(channel->hw_value & CHANNEL_OFDM));
-
-	/* Get coefficient
-	 * ALGO: coef = (5 * clock / carrier_freq) / 2
-	 * we scale coef by shifting clock value by 24 for
-	 * better precision since we use integers */
-	/* TODO: Half/quarter rate */
-	clock =  (channel->hw_value & CHANNEL_TURBO) ? 80 : 40;
-	coef_scaled = ((5 * (clock << 24)) / 2) / channel->center_freq;
-
-	/* Get exponent
-	 * ALGO: coef_exp = 14 - highest set bit position */
-	coef_exp = ilog2(coef_scaled);
-
-	/* Doesn't make sense if it's zero*/
-	if (!coef_scaled || !coef_exp)
-		return -EINVAL;
+	struct ieee80211_channel *channel = ah->ah_current_channel;
+	struct ath_common *common = ath5k_hw_common(ah);
+	u32 usec_reg, txlat, rxlat, usec, clock, sclock, txf2txs;
+
+	/*
+	 * Set core clock frequency
+	 */
+	if (channel->hw_value & CHANNEL_5GHZ)
+		clock = 40; /* 802.11a */
+	else if (channel->hw_value & CHANNEL_CCK)
+		clock = 22; /* 802.11b */
+	else
+		clock = 44; /* 802.11g */
+
+	/* Use clock multiplier for non-default
+	 * bwmode */
+	switch (ah->ah_bwmode) {
+	case AR5K_BWMODE_40MHZ:
+		clock *= 2;
+		break;
+	case AR5K_BWMODE_10MHZ:
+		clock /= 2;
+		break;
+	case AR5K_BWMODE_5MHZ:
+		clock /= 4;
+		break;
+	default:
+		break;
+	}
 
-	/* Note: we've shifted coef_scaled by 24 */
-	coef_exp = 14 - (coef_exp - 24);
+	common->clockrate = clock;
 
+	/*
+	 * Set USEC parameters
+	 */
+	/* Set USEC counter on PCU*/
+	usec = clock - 1;
+	usec = AR5K_REG_SM(usec, AR5K_USEC_1);
 
-	/* Get mantissa (significant digits)
-	 * ALGO: coef_mant = floor(coef_scaled* 2^coef_exp+0.5) */
-	coef_man = coef_scaled +
-		(1 << (24 - coef_exp - 1));
+	/* Set usec duration on DCU */
+	if (ah->ah_version != AR5K_AR5210)
+		AR5K_REG_WRITE_BITS(ah, AR5K_DCU_GBL_IFS_MISC,
+					AR5K_DCU_GBL_IFS_MISC_USEC_DUR,
+					clock);
 
-	/* Calculate delta slope coefficient exponent
-	 * and mantissa (remove scaling) and set them on hw */
-	ds_coef_man = coef_man >> (24 - coef_exp);
-	ds_coef_exp = coef_exp - 16;
+	/* Set 32MHz USEC counter */
+	if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413) ||
+		(ah->ah_radio == AR5K_RF2316) ||
+		(ah->ah_radio == AR5K_RF2317))
+	/* Remain on 40MHz clock ? */
+		sclock = 40 - 1;
+	else
+		sclock = 32 - 1;
+	sclock = AR5K_REG_SM(sclock, AR5K_USEC_32);
 
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
-		AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
-		AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
+	/*
+	 * Set tx/rx latencies
+	 */
+	usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
+	txlat = AR5K_REG_MS(usec_reg, AR5K_USEC_TX_LATENCY_5211);
+	rxlat = AR5K_REG_MS(usec_reg, AR5K_USEC_RX_LATENCY_5211);
 
-	return 0;
-}
+	/*
+	 * 5210 initvals don't include usec settings
+	 * so we need to use magic values here for
+	 * tx/rx latencies
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		/* same for turbo */
+		txlat = AR5K_INIT_TX_LATENCY_5210;
+		rxlat = AR5K_INIT_RX_LATENCY_5210;
+	}
 
+	if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+		/* 5311 has different tx/rx latency masks
+		 * from 5211, since we deal 5311 the same
+		 * as 5211 when setting initvals, shift
+		 * values here to their proper locations
+		 *
+		 * Note: Initvals indicate tx/rx/ latencies
+		 * are the same for turbo mode */
+		txlat = AR5K_REG_SM(txlat, AR5K_USEC_TX_LATENCY_5210);
+		rxlat = AR5K_REG_SM(rxlat, AR5K_USEC_RX_LATENCY_5210);
+	} else
+	switch (ah->ah_bwmode) {
+	case AR5K_BWMODE_10MHZ:
+		txlat = AR5K_REG_SM(txlat * 2,
+				AR5K_USEC_TX_LATENCY_5211);
+		rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX,
+				AR5K_USEC_RX_LATENCY_5211);
+		txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_10MHZ;
+		break;
+	case AR5K_BWMODE_5MHZ:
+		txlat = AR5K_REG_SM(txlat * 4,
+				AR5K_USEC_TX_LATENCY_5211);
+		rxlat = AR5K_REG_SM(AR5K_INIT_RX_LAT_MAX,
+				AR5K_USEC_RX_LATENCY_5211);
+		txf2txs = AR5K_INIT_TXF2TXD_START_DELAY_5MHZ;
+		break;
+	case AR5K_BWMODE_40MHZ:
+		txlat = AR5K_INIT_TX_LAT_MIN;
+		rxlat = AR5K_REG_SM(rxlat / 2,
+				AR5K_USEC_RX_LATENCY_5211);
+		txf2txs = AR5K_INIT_TXF2TXD_START_DEFAULT;
+		break;
+	default:
+		break;
+	}
 
-/*
- * index into rates for control rates, we can set it up like this because
- * this is only used for AR5212 and we know it supports G mode
- */
-static const unsigned int control_rates[] =
-	{ 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
+	usec_reg = (usec | sclock | txlat | rxlat);
+	ath5k_hw_reg_write(ah, usec_reg, AR5K_USEC);
 
-/**
- * ath5k_hw_write_rate_duration - fill rate code to duration table
- *
- * @ah: the &struct ath5k_hw
- * @mode: one of enum ath5k_driver_mode
- *
- * Write the rate code to duration table upon hw reset. This is a helper for
- * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout on
- * the hardware, based on current mode, for each rate. The rates which are
- * capable of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have
- * different rate code so we write their value twice (one for long preample
- * and one for short).
+	/* On 5112 set tx frane to tx data start delay */
+	if (ah->ah_radio == AR5K_RF5112) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_RF_CTL2,
+					AR5K_PHY_RF_CTL2_TXF2TXD_START,
+					txf2txs);
+	}
+}
+
+/*
+ * If there is an external 32KHz crystal available, use it
+ * as ref. clock instead of 32/40MHz clock and baseband clocks
+ * to save power during sleep or restore normal 32/40MHz
+ * operation.
  *
- * Note: Band doesn't matter here, if we set the values for OFDM it works
- * on both a and g modes. So all we have to do is set values for all g rates
- * that include all OFDM and CCK rates. If we operate in turbo or xr/half/
- * quarter rate mode, we need to use another set of bitrates (that's why we
- * need the mode parameter) but we don't handle these proprietary modes yet.
+ * XXX: When operating on 32KHz certain PHY registers (27 - 31,
+ *	123 - 127) require delay on access.
  */
-static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
-       unsigned int mode)
+static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
 {
-	struct ath5k_softc *sc = ah->ah_sc;
-	struct ieee80211_rate *rate;
-	unsigned int i;
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 scal, spending;
+
+	/* Only set 32KHz settings if we have an external
+	 * 32KHz crystal present */
+	if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) ||
+	AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) &&
+	enable) {
 
-	/* Write rate duration table */
-	for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
-		u32 reg;
-		u16 tx_time;
+		/* 1 usec/cycle */
+		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1);
+		/* Set up tsf increment on each cycle */
+		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61);
 
-		rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];
+		/* Set baseband sleep control registers
+		 * and sleep control rate */
+		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
+
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413) ||
+		(ah->ah_radio == AR5K_RF2316) ||
+		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+			spending = 0x14;
+		else
+			spending = 0x18;
+		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
 
-		/* Set ACK timeout */
-		reg = AR5K_RATE_DUR(rate->hw_value);
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413) ||
+		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+			ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT);
+			ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL);
+			ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK);
+			ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY);
+			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02);
+		} else {
+			ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT);
+			ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL);
+			ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK);
+			ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY);
+			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03);
+		}
 
-		/* An ACK frame consists of 10 bytes. If you add the FCS,
-		 * which ieee80211_generic_frame_duration() adds,
-		 * its 14 bytes. Note we use the control rate and not the
-		 * actual rate for this rate. See mac80211 tx.c
-		 * ieee80211_duration() for a brief description of
-		 * what rate we should choose to TX ACKs. */
-		tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
-							NULL, 10, rate));
+		/* Enable sleep clock operation */
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_EN);
 
-		ath5k_hw_reg_write(ah, tx_time, reg);
+	} else {
 
-		if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
-			continue;
+		/* Disable sleep clock operation and
+		 * restore default parameters */
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_EN);
 
-		/*
-		 * We're not distinguishing short preamble here,
-		 * This is true, all we'll get is a longer value here
-		 * which is not necessarilly bad. We could use
-		 * export ieee80211_frame_duration() but that needs to be
-		 * fixed first to be properly used by mac802111 drivers:
-		 *
-		 *  - remove erp stuff and let the routine figure ofdm
-		 *    erp rates
-		 *  - remove passing argument ieee80211_local as
-		 *    drivers don't have access to it
-		 *  - move drivers using ieee80211_generic_frame_duration()
-		 *    to this
-		 */
-		ath5k_hw_reg_write(ah, tx_time,
-			reg + (AR5K_SET_SHORT_PREAMBLE << 2));
+		AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
+				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0);
+
+		/* Set DAC/ADC delays */
+		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
+
+		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
+			scal = AR5K_PHY_SCAL_32MHZ_2417;
+		else if (ee->ee_is_hb63)
+			scal = AR5K_PHY_SCAL_32MHZ_HB63;
+		else
+			scal = AR5K_PHY_SCAL_32MHZ;
+		ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
+
+		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
+
+		if ((ah->ah_radio == AR5K_RF5112) ||
+		(ah->ah_radio == AR5K_RF5413) ||
+		(ah->ah_radio == AR5K_RF2316) ||
+		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
+			spending = 0x14;
+		else
+			spending = 0x18;
+		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
+
+		/* Set up tsf increment on each cycle */
+		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1);
 	}
 }
 
+
+/*********************\
+* Reset/Sleep control *
+\*********************/
+
 /*
  * Reset chipset
  */
@@ -236,6 +363,64 @@ static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
 }
 
 /*
+ * Reset AHB chipset
+ * AR5K_RESET_CTL_PCU flag resets WMAC
+ * AR5K_RESET_CTL_BASEBAND flag resets WBB
+ */
+static int ath5k_hw_wisoc_reset(struct ath5k_hw *ah, u32 flags)
+{
+	u32 mask = flags ? flags : ~0U;
+	volatile u32 *reg;
+	u32 regval;
+	u32 val = 0;
+
+	/* ah->ah_mac_srev is not available at this point yet */
+	if (ah->ah_sc->devid >= AR5K_SREV_AR2315_R6) {
+		reg = (u32 *) AR5K_AR2315_RESET;
+		if (mask & AR5K_RESET_CTL_PCU)
+			val |= AR5K_AR2315_RESET_WMAC;
+		if (mask & AR5K_RESET_CTL_BASEBAND)
+			val |= AR5K_AR2315_RESET_BB_WARM;
+	} else {
+		reg = (u32 *) AR5K_AR5312_RESET;
+		if (to_platform_device(ah->ah_sc->dev)->id == 0) {
+			if (mask & AR5K_RESET_CTL_PCU)
+				val |= AR5K_AR5312_RESET_WMAC0;
+			if (mask & AR5K_RESET_CTL_BASEBAND)
+				val |= AR5K_AR5312_RESET_BB0_COLD |
+				       AR5K_AR5312_RESET_BB0_WARM;
+		} else {
+			if (mask & AR5K_RESET_CTL_PCU)
+				val |= AR5K_AR5312_RESET_WMAC1;
+			if (mask & AR5K_RESET_CTL_BASEBAND)
+				val |= AR5K_AR5312_RESET_BB1_COLD |
+				       AR5K_AR5312_RESET_BB1_WARM;
+		}
+	}
+
+	/* Put BB/MAC into reset */
+	regval = __raw_readl(reg);
+	__raw_writel(regval | val, reg);
+	regval = __raw_readl(reg);
+	udelay(100);
+
+	/* Bring BB/MAC out of reset */
+	__raw_writel(regval & ~val, reg);
+	regval = __raw_readl(reg);
+
+	/*
+	 * Reset configuration register (for hw byte-swap). Note that this
+	 * is only set for big endian. We do the necessary magic in
+	 * AR5K_INIT_CFG.
+	 */
+	if ((flags & AR5K_RESET_CTL_PCU) == 0)
+		ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
+
+	return 0;
+}
+
+
+/*
  * Sleep control
  */
 static int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
@@ -334,6 +519,9 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah)
 	u32 bus_flags;
 	int ret;
 
+	if (ath5k_get_bus_type(ah) == ATH_AHB)
+		return 0;
+
 	/* Make sure device is awake */
 	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
 	if (ret) {
@@ -349,7 +537,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah)
 	 * we ingore that flag for PCI-E cards. On PCI cards
 	 * this flag gets cleared after 64 PCI clocks.
 	 */
-	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+	bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI;
 
 	if (ah->ah_version == AR5K_AR5210) {
 		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
@@ -378,7 +566,6 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah)
 
 /*
  * Bring up MAC + PHY Chips and program PLL
- * TODO: Half/Quarter rate support
  */
 int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 {
@@ -390,11 +577,13 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 	mode = 0;
 	clock = 0;
 
-	/* Wakeup the device */
-	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
-		return ret;
+	if ((ath5k_get_bus_type(ah) != ATH_AHB) || !initial) {
+		/* Wakeup the device */
+		ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+		if (ret) {
+			ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
+			return ret;
+		}
 	}
 
 	/*
@@ -405,7 +594,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 	 * we ingore that flag for PCI-E cards. On PCI cards
 	 * this flag gets cleared after 64 PCI clocks.
 	 */
-	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+	bus_flags = (pdev && pci_is_pcie(pdev)) ? 0 : AR5K_RESET_CTL_PCI;
 
 	if (ah->ah_version == AR5K_AR5210) {
 		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
@@ -413,8 +602,12 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 			AR5K_RESET_CTL_PHY | AR5K_RESET_CTL_PCI);
 			mdelay(2);
 	} else {
-		ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
-			AR5K_RESET_CTL_BASEBAND | bus_flags);
+		if (ath5k_get_bus_type(ah) == ATH_AHB)
+			ret = ath5k_hw_wisoc_reset(ah, AR5K_RESET_CTL_PCU |
+				AR5K_RESET_CTL_BASEBAND);
+		else
+			ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+				AR5K_RESET_CTL_BASEBAND | bus_flags);
 	}
 
 	if (ret) {
@@ -429,9 +622,15 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 		return ret;
 	}
 
-	/* ...clear reset control register and pull device out of
-	 * warm reset */
-	if (ath5k_hw_nic_reset(ah, 0)) {
+	/* ...reset configuration regiter on Wisoc ...
+	 * ...clear reset control register and pull device out of
+	 * warm reset on others */
+	if (ath5k_get_bus_type(ah) == ATH_AHB)
+		ret = ath5k_hw_wisoc_reset(ah, 0);
+	else
+		ret = ath5k_hw_nic_reset(ah, 0);
+
+	if (ret) {
 		ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
 		return -EIO;
 	}
@@ -466,7 +665,8 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 				 * CCK headers) operation. We need to test
 				 * this, 5211 might support ofdm-only g after
 				 * all, there are also initial register values
-				 * in the code for g mode (see initvals.c). */
+				 * in the code for g mode (see initvals.c).
+				 */
 				if (ah->ah_version == AR5K_AR5211)
 					mode |= AR5K_PHY_MODE_MOD_OFDM;
 				else
@@ -479,6 +679,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 		} else if (flags & CHANNEL_5GHZ) {
 			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
 
+			/* Different PLL setting for 5413 */
 			if (ah->ah_radio == AR5K_RF5413)
 				clock = AR5K_PHY_PLL_40MHZ_5413;
 			else
@@ -496,12 +697,29 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 			return -EINVAL;
 		}
 
-		if (flags & CHANNEL_TURBO)
-			turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
+		/*XXX: Can bwmode be used with dynamic mode ?
+		 * (I don't think it supports 44MHz) */
+		/* On 2425 initvals TURBO_SHORT is not pressent */
+		if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) {
+			turbo = AR5K_PHY_TURBO_MODE |
+				(ah->ah_radio == AR5K_RF2425) ? 0 :
+				AR5K_PHY_TURBO_SHORT;
+		} else if (ah->ah_bwmode != AR5K_BWMODE_DEFAULT) {
+			if (ah->ah_radio == AR5K_RF5413) {
+				mode |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ?
+					AR5K_PHY_MODE_HALF_RATE :
+					AR5K_PHY_MODE_QUARTER_RATE;
+			} else if (ah->ah_version == AR5K_AR5212) {
+				clock |= (ah->ah_bwmode == AR5K_BWMODE_10MHZ) ?
+					AR5K_PHY_PLL_HALF_RATE :
+					AR5K_PHY_PLL_QUARTER_RATE;
+			}
+		}
+
 	} else { /* Reset the device */
 
 		/* ...enable Atheros turbo mode if requested */
-		if (flags & CHANNEL_TURBO)
+		if (ah->ah_bwmode == AR5K_BWMODE_40MHZ)
 			ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
 					AR5K_PHY_TURBO);
 	}
@@ -522,107 +740,10 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 	return 0;
 }
 
-/*
- * If there is an external 32KHz crystal available, use it
- * as ref. clock instead of 32/40MHz clock and baseband clocks
- * to save power during sleep or restore normal 32/40MHz
- * operation.
- *
- * XXX: When operating on 32KHz certain PHY registers (27 - 31,
- * 	123 - 127) require delay on access.
- */
-static void ath5k_hw_set_sleep_clock(struct ath5k_hw *ah, bool enable)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	u32 scal, spending, usec32;
 
-	/* Only set 32KHz settings if we have an external
-	 * 32KHz crystal present */
-	if ((AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1) ||
-	AR5K_EEPROM_HAS32KHZCRYSTAL_OLD(ee->ee_misc1)) &&
-	enable) {
-
-		/* 1 usec/cycle */
-		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, 1);
-		/* Set up tsf increment on each cycle */
-		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 61);
-
-		/* Set baseband sleep control registers
-		 * and sleep control rate */
-		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
-
-		if ((ah->ah_radio == AR5K_RF5112) ||
-		(ah->ah_radio == AR5K_RF5413) ||
-		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
-			spending = 0x14;
-		else
-			spending = 0x18;
-		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
-
-		if ((ah->ah_radio == AR5K_RF5112) ||
-		(ah->ah_radio == AR5K_RF5413) ||
-		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
-			ath5k_hw_reg_write(ah, 0x26, AR5K_PHY_SLMT);
-			ath5k_hw_reg_write(ah, 0x0d, AR5K_PHY_SCAL);
-			ath5k_hw_reg_write(ah, 0x07, AR5K_PHY_SCLOCK);
-			ath5k_hw_reg_write(ah, 0x3f, AR5K_PHY_SDELAY);
-			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
-				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x02);
-		} else {
-			ath5k_hw_reg_write(ah, 0x0a, AR5K_PHY_SLMT);
-			ath5k_hw_reg_write(ah, 0x0c, AR5K_PHY_SCAL);
-			ath5k_hw_reg_write(ah, 0x03, AR5K_PHY_SCLOCK);
-			ath5k_hw_reg_write(ah, 0x20, AR5K_PHY_SDELAY);
-			AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
-				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0x03);
-		}
-
-		/* Enable sleep clock operation */
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG,
-				AR5K_PCICFG_SLEEP_CLOCK_EN);
-
-	} else {
-
-		/* Disable sleep clock operation and
-		 * restore default parameters */
-		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
-				AR5K_PCICFG_SLEEP_CLOCK_EN);
-
-		AR5K_REG_WRITE_BITS(ah, AR5K_PCICFG,
-				AR5K_PCICFG_SLEEP_CLOCK_RATE, 0);
-
-		ath5k_hw_reg_write(ah, 0x1f, AR5K_PHY_SCR);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
-
-		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
-			scal = AR5K_PHY_SCAL_32MHZ_2417;
-		else if (ee->ee_is_hb63)
-			scal = AR5K_PHY_SCAL_32MHZ_HB63;
-		else
-			scal = AR5K_PHY_SCAL_32MHZ;
-		ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
-
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
-
-		if ((ah->ah_radio == AR5K_RF5112) ||
-		(ah->ah_radio == AR5K_RF5413) ||
-		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4)))
-			spending = 0x14;
-		else
-			spending = 0x18;
-		ath5k_hw_reg_write(ah, spending, AR5K_PHY_SPENDING);
-
-		if ((ah->ah_radio == AR5K_RF5112) ||
-		(ah->ah_radio == AR5K_RF5413))
-			usec32 = 39;
-		else
-			usec32 = 31;
-		AR5K_REG_WRITE_BITS(ah, AR5K_USEC_5211, AR5K_USEC_32, usec32);
-
-		AR5K_REG_WRITE_BITS(ah, AR5K_TSF_PARM, AR5K_TSF_PARM_INC, 1);
-	}
-}
+/**************************************\
+* Post-initvals register modifications *
+\**************************************/
 
 /* TODO: Half/Quarter rate */
 static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
@@ -663,22 +784,10 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
 		AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
 				AR5K_TXCFG_DCU_DBL_BUF_DIS);
 
-	/* Set DAC/ADC delays */
-	if (ah->ah_version == AR5K_AR5212) {
-		u32 scal;
-		struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-		if (ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))
-			scal = AR5K_PHY_SCAL_32MHZ_2417;
-		else if (ee->ee_is_hb63)
-			scal = AR5K_PHY_SCAL_32MHZ_HB63;
-		else
-			scal = AR5K_PHY_SCAL_32MHZ;
-		ath5k_hw_reg_write(ah, scal, AR5K_PHY_SCAL);
-	}
-
 	/* Set fast ADC */
 	if ((ah->ah_radio == AR5K_RF5413) ||
-	(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
+		(ah->ah_radio == AR5K_RF2317) ||
+		(ah->ah_mac_version == (AR5K_SREV_AR2417 >> 4))) {
 		u32 fast_adc = true;
 
 		if (channel->center_freq == 2462 ||
@@ -706,33 +815,68 @@ static void ath5k_hw_tweak_initval_settings(struct ath5k_hw *ah,
 	}
 
 	if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
-		u32 usec_reg;
-		/* 5311 has different tx/rx latency masks
-		 * from 5211, since we deal 5311 the same
-		 * as 5211 when setting initvals, shift
-		 * values here to their proper locations */
-		usec_reg = ath5k_hw_reg_read(ah, AR5K_USEC_5211);
-		ath5k_hw_reg_write(ah, usec_reg & (AR5K_USEC_1 |
-				AR5K_USEC_32 |
-				AR5K_USEC_TX_LATENCY_5211 |
-				AR5K_REG_SM(29,
-				AR5K_USEC_RX_LATENCY_5210)),
-				AR5K_USEC_5211);
 		/* Clear QCU/DCU clock gating register */
 		ath5k_hw_reg_write(ah, 0, AR5K_QCUDCU_CLKGT);
 		/* Set DAC/ADC delays */
-		ath5k_hw_reg_write(ah, 0x08, AR5K_PHY_SCAL);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ_5311,
+						AR5K_PHY_SCAL);
 		/* Enable PCU FIFO corruption ECO */
 		AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW_5211,
 					AR5K_DIAG_SW_ECO_ENABLE);
 	}
+
+	if (ah->ah_bwmode) {
+		/* Increase PHY switch and AGC settling time
+		 * on turbo mode (ath5k_hw_commit_eeprom_settings
+		 * will override settling time if available) */
+		if (ah->ah_bwmode == AR5K_BWMODE_40MHZ) {
+
+			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+						AR5K_PHY_SETTLING_AGC,
+						AR5K_AGC_SETTLING_TURBO);
+
+			/* XXX: Initvals indicate we only increase
+			 * switch time on AR5212, 5211 and 5210
+			 * only change agc time (bug?) */
+			if (ah->ah_version == AR5K_AR5212)
+				AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
+						AR5K_PHY_SETTLING_SWITCH,
+						AR5K_SWITCH_SETTLING_TURBO);
+
+			if (ah->ah_version == AR5K_AR5210) {
+				/* Set Frame Control Register */
+				ath5k_hw_reg_write(ah,
+					(AR5K_PHY_FRAME_CTL_INI |
+					AR5K_PHY_TURBO_MODE |
+					AR5K_PHY_TURBO_SHORT | 0x2020),
+					AR5K_PHY_FRAME_CTL_5210);
+			}
+		/* On 5413 PHY force window length for half/quarter rate*/
+		} else if ((ah->ah_mac_srev >= AR5K_SREV_AR5424) &&
+		(ah->ah_mac_srev <= AR5K_SREV_AR5414)) {
+			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL_5211,
+						AR5K_PHY_FRAME_CTL_WIN_LEN,
+						3);
+		}
+	} else if (ah->ah_version == AR5K_AR5210) {
+		/* Set Frame Control Register for normal operation */
+		ath5k_hw_reg_write(ah, (AR5K_PHY_FRAME_CTL_INI | 0x1020),
+						AR5K_PHY_FRAME_CTL_5210);
+	}
 }
 
 static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
-		struct ieee80211_channel *channel, u8 ee_mode)
+		struct ieee80211_channel *channel)
 {
 	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
 	s16 cck_ofdm_pwr_delta;
+	u8 ee_mode;
+
+	/* TODO: Add support for AR5210 EEPROM */
+	if (ah->ah_version == AR5K_AR5210)
+		return;
+
+	ee_mode = ath5k_eeprom_mode_from_channel(channel);
 
 	/* Adjust power delta for channel 14 */
 	if (channel->center_freq == 2484)
@@ -772,7 +916,7 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 		AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
 		AR5K_PHY_NFTHRES);
 
-	if ((channel->hw_value & CHANNEL_TURBO) &&
+	if ((ah->ah_bwmode == AR5K_BWMODE_40MHZ) &&
 	(ah->ah_ee_version >= AR5K_EEPROM_VERSION_5_0)) {
 		/* Switch settling time (Turbo) */
 		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_SETTLING,
@@ -870,143 +1014,172 @@ static void ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 		ath5k_hw_reg_write(ah, 0, AR5K_PHY_HEAVY_CLIP_ENABLE);
 }
 
-/*
- * Main reset function
- */
+
+/*********************\
+* Main reset function *
+\*********************/
+
 int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
-	struct ieee80211_channel *channel, bool change_channel)
+		struct ieee80211_channel *channel, bool fast, bool skip_pcu)
 {
-	struct ath_common *common = ath5k_hw_common(ah);
-	u32 s_seq[10], s_led[3], staid1_flags, tsf_up, tsf_lo;
-	u32 phy_tst1;
-	u8 mode, freq, ee_mode;
+	u32 s_seq[10], s_led[3], tsf_up, tsf_lo;
+	u8 mode;
 	int i, ret;
 
-	ee_mode = 0;
-	staid1_flags = 0;
 	tsf_up = 0;
 	tsf_lo = 0;
-	freq = 0;
 	mode = 0;
 
 	/*
-	 * Save some registers before a reset
+	 * Sanity check for fast flag
+	 * Fast channel change only available
+	 * on AR2413/AR5413.
 	 */
-	/*DCU/Antenna selection not available on 5210*/
-	if (ah->ah_version != AR5K_AR5210) {
+	if (fast && (ah->ah_radio != AR5K_RF2413) &&
+	(ah->ah_radio != AR5K_RF5413))
+		fast = 0;
 
-		switch (channel->hw_value & CHANNEL_MODES) {
-		case CHANNEL_A:
-			mode = AR5K_MODE_11A;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		case CHANNEL_G:
-			mode = AR5K_MODE_11G;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11G;
-			break;
-		case CHANNEL_B:
-			mode = AR5K_MODE_11B;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11B;
-			break;
-		case CHANNEL_T:
-			mode = AR5K_MODE_11A_TURBO;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		case CHANNEL_TG:
-			if (ah->ah_version == AR5K_AR5211) {
-				ATH5K_ERR(ah->ah_sc,
-					"TurboG mode not available on 5211");
-				return -EINVAL;
-			}
-			mode = AR5K_MODE_11G_TURBO;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11G;
-			break;
-		case CHANNEL_XR:
-			if (ah->ah_version == AR5K_AR5211) {
-				ATH5K_ERR(ah->ah_sc,
-					"XR mode not available on 5211");
-				return -EINVAL;
-			}
-			mode = AR5K_MODE_XR;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		default:
+	/* Disable sleep clock operation
+	 * to avoid register access delay on certain
+	 * PHY registers */
+	if (ah->ah_version == AR5K_AR5212)
+		ath5k_hw_set_sleep_clock(ah, false);
+
+	/*
+	 * Stop PCU
+	 */
+	ath5k_hw_stop_rx_pcu(ah);
+
+	/*
+	 * Stop DMA
+	 *
+	 * Note: If DMA didn't stop continue
+	 * since only a reset will fix it.
+	 */
+	ret = ath5k_hw_dma_stop(ah);
+
+	/* RF Bus grant won't work if we have pending
+	 * frames */
+	if (ret && fast) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
+			"DMA didn't stop, falling back to normal reset\n");
+		fast = 0;
+		/* Non fatal, just continue with
+		 * normal reset */
+		ret = 0;
+	}
+
+	switch (channel->hw_value & CHANNEL_MODES) {
+	case CHANNEL_A:
+		mode = AR5K_MODE_11A;
+		break;
+	case CHANNEL_G:
+
+		if (ah->ah_version <= AR5K_AR5211) {
 			ATH5K_ERR(ah->ah_sc,
-				"invalid channel: %d\n", channel->center_freq);
+				"G mode not available on 5210/5211");
 			return -EINVAL;
 		}
 
-		if (change_channel) {
-			/*
-			 * Save frame sequence count
-			 * For revs. after Oahu, only save
-			 * seq num for DCU 0 (Global seq num)
-			 */
-			if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
-
-				for (i = 0; i < 10; i++)
-					s_seq[i] = ath5k_hw_reg_read(ah,
-						AR5K_QUEUE_DCU_SEQNUM(i));
+		mode = AR5K_MODE_11G;
+		break;
+	case CHANNEL_B:
 
-			} else {
-				s_seq[0] = ath5k_hw_reg_read(ah,
-						AR5K_QUEUE_DCU_SEQNUM(0));
-			}
+		if (ah->ah_version < AR5K_AR5211) {
+			ATH5K_ERR(ah->ah_sc,
+				"B mode not available on 5210");
+			return -EINVAL;
+		}
 
-			/* TSF accelerates on AR5211 during reset
-			 * As a workaround save it here and restore
-			 * it later so that it's back in time after
-			 * reset. This way it'll get re-synced on the
-			 * next beacon without breaking ad-hoc.
-			 *
-			 * On AR5212 TSF is almost preserved across a
-			 * reset so it stays back in time anyway and
-			 * we don't have to save/restore it.
-			 *
-			 * XXX: Since this breaks power saving we have
-			 * to disable power saving until we receive the
-			 * next beacon, so we can resync beacon timers */
-			if (ah->ah_version == AR5K_AR5211) {
-				tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
-				tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
-			}
+		mode = AR5K_MODE_11B;
+		break;
+	case CHANNEL_XR:
+		if (ah->ah_version == AR5K_AR5211) {
+			ATH5K_ERR(ah->ah_sc,
+				"XR mode not available on 5211");
+			return -EINVAL;
 		}
+		mode = AR5K_MODE_XR;
+		break;
+	default:
+		ATH5K_ERR(ah->ah_sc,
+			"invalid channel: %d\n", channel->center_freq);
+		return -EINVAL;
+	}
 
-		if (ah->ah_version == AR5K_AR5212) {
-			/* Restore normal 32/40MHz clock operation
-			 * to avoid register access delay on certain
-			 * PHY registers */
-			ath5k_hw_set_sleep_clock(ah, false);
+	/*
+	 * If driver requested fast channel change and DMA has stopped
+	 * go on. If it fails continue with a normal reset.
+	 */
+	if (fast) {
+		ret = ath5k_hw_phy_init(ah, channel, mode, true);
+		if (ret) {
+			ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
+				"fast chan change failed, falling back to normal reset\n");
+			/* Non fatal, can happen eg.
+			 * on mode change */
+			ret = 0;
+		} else
+			return 0;
+	}
 
-			/* Since we are going to write rf buffer
-			 * check if we have any pending gain_F
-			 * optimization settings */
-			if (change_channel && ah->ah_rf_banks != NULL)
-				ath5k_hw_gainf_calibrate(ah);
+	/*
+	 * Save some registers before a reset
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		/*
+		 * Save frame sequence count
+		 * For revs. after Oahu, only save
+		 * seq num for DCU 0 (Global seq num)
+		 */
+		if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+
+			for (i = 0; i < 10; i++)
+				s_seq[i] = ath5k_hw_reg_read(ah,
+					AR5K_QUEUE_DCU_SEQNUM(i));
+
+		} else {
+			s_seq[0] = ath5k_hw_reg_read(ah,
+					AR5K_QUEUE_DCU_SEQNUM(0));
+		}
+
+		/* TSF accelerates on AR5211 during reset
+		 * As a workaround save it here and restore
+		 * it later so that it's back in time after
+		 * reset. This way it'll get re-synced on the
+		 * next beacon without breaking ad-hoc.
+		 *
+		 * On AR5212 TSF is almost preserved across a
+		 * reset so it stays back in time anyway and
+		 * we don't have to save/restore it.
+		 *
+		 * XXX: Since this breaks power saving we have
+		 * to disable power saving until we receive the
+		 * next beacon, so we can resync beacon timers */
+		if (ah->ah_version == AR5K_AR5211) {
+			tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+			tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
 		}
 	}
 
+
 	/*GPIOs*/
 	s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) &
 					AR5K_PCICFG_LEDSTATE;
 	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
 	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
 
-	/* AR5K_STA_ID1 flags, only preserve antenna
-	 * settings and ack/cts rate mode */
-	staid1_flags = ath5k_hw_reg_read(ah, AR5K_STA_ID1) &
-			(AR5K_STA_ID1_DEFAULT_ANTENNA |
-			AR5K_STA_ID1_DESC_ANTENNA |
-			AR5K_STA_ID1_RTS_DEF_ANTENNA |
-			AR5K_STA_ID1_ACKCTS_6MB |
-			AR5K_STA_ID1_BASE_RATE_11B |
-			AR5K_STA_ID1_SELFGEN_DEF_ANT);
+
+	/*
+	 * Since we are going to write rf buffer
+	 * check if we have any pending gain_F
+	 * optimization settings
+	 */
+	if (ah->ah_version == AR5K_AR5212 &&
+	(ah->ah_radio <= AR5K_RF5112)) {
+		if (!fast && ah->ah_rf_banks != NULL)
+				ath5k_hw_gainf_calibrate(ah);
+	}
 
 	/* Wakeup the device */
 	ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
@@ -1021,121 +1194,42 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 							AR5K_PHY(0));
 
 	/* Write initial settings */
-	ret = ath5k_hw_write_initvals(ah, mode, change_channel);
+	ret = ath5k_hw_write_initvals(ah, mode, skip_pcu);
 	if (ret)
 		return ret;
 
+	/* Initialize core clock settings */
+	ath5k_hw_init_core_clock(ah);
+
 	/*
-	 * 5211/5212 Specific
+	 * Tweak initval settings for revised
+	 * chipsets and add some more config
+	 * bits
 	 */
-	if (ah->ah_version != AR5K_AR5210) {
-
-		/*
-		 * Write initial RF gain settings
-		 * This should work for both 5111/5112
-		 */
-		ret = ath5k_hw_rfgain_init(ah, freq);
-		if (ret)
-			return ret;
-
-		mdelay(1);
-
-		/*
-		 * Tweak initval settings for revised
-		 * chipsets and add some more config
-		 * bits
-		 */
-		ath5k_hw_tweak_initval_settings(ah, channel);
-
-		/*
-		 * Set TX power
-		 */
-		ret = ath5k_hw_txpower(ah, channel, ee_mode,
-					ah->ah_txpower.txp_max_pwr / 2);
-		if (ret)
-			return ret;
+	ath5k_hw_tweak_initval_settings(ah, channel);
 
-		/* Write rate duration table only on AR5212 and if
-		 * virtual interface has already been brought up
-		 * XXX: rethink this after new mode changes to
-		 * mac80211 are integrated */
-		if (ah->ah_version == AR5K_AR5212 &&
-			ah->ah_sc->nvifs)
-			ath5k_hw_write_rate_duration(ah, mode);
+	/* Commit values from EEPROM */
+	ath5k_hw_commit_eeprom_settings(ah, channel);
 
-		/*
-		 * Write RF buffer
-		 */
-		ret = ath5k_hw_rfregs_init(ah, channel, mode);
-		if (ret)
-			return ret;
-
-
-		/* Write OFDM timings on 5212*/
-		if (ah->ah_version == AR5K_AR5212 &&
-			channel->hw_value & CHANNEL_OFDM) {
-
-			ret = ath5k_hw_write_ofdm_timings(ah, channel);
-			if (ret)
-				return ret;
-
-			/* Spur info is available only from EEPROM versions
-			 * greater than 5.3, but the EEPROM routines will use
-			 * static values for older versions */
-			if (ah->ah_mac_srev >= AR5K_SREV_AR5424)
-				ath5k_hw_set_spur_mitigation_filter(ah,
-								    channel);
-		}
-
-		/*Enable/disable 802.11b mode on 5111
-		(enable 2111 frequency converter + CCK)*/
-		if (ah->ah_radio == AR5K_RF5111) {
-			if (mode == AR5K_MODE_11B)
-				AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
-				    AR5K_TXCFG_B_MODE);
-			else
-				AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
-				    AR5K_TXCFG_B_MODE);
-		}
-
-		/* Commit values from EEPROM */
-		ath5k_hw_commit_eeprom_settings(ah, channel, ee_mode);
-
-	} else {
-		/*
-		 * For 5210 we do all initialization using
-		 * initvals, so we don't have to modify
-		 * any settings (5210 also only supports
-		 * a/aturbo modes)
-		 */
-		mdelay(1);
-		/* Disable phy and wait */
-		ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
-		mdelay(1);
-	}
 
 	/*
 	 * Restore saved values
 	 */
 
-	/*DCU/Antenna selection not available on 5210*/
+	/* Seqnum, TSF */
 	if (ah->ah_version != AR5K_AR5210) {
+		if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+			for (i = 0; i < 10; i++)
+				ath5k_hw_reg_write(ah, s_seq[i],
+					AR5K_QUEUE_DCU_SEQNUM(i));
+		} else {
+			ath5k_hw_reg_write(ah, s_seq[0],
+				AR5K_QUEUE_DCU_SEQNUM(0));
+		}
 
-		if (change_channel) {
-			if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
-				for (i = 0; i < 10; i++)
-					ath5k_hw_reg_write(ah, s_seq[i],
-						AR5K_QUEUE_DCU_SEQNUM(i));
-			} else {
-				ath5k_hw_reg_write(ah, s_seq[0],
-					AR5K_QUEUE_DCU_SEQNUM(0));
-			}
-
-
-			if (ah->ah_version == AR5K_AR5211) {
-				ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
-				ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
-			}
+		if (ah->ah_version == AR5K_AR5211) {
+			ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
+			ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
 		}
 	}
 
@@ -1146,203 +1240,34 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
 	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
 
-	/* Restore sta_id flags and preserve our mac address*/
-	ath5k_hw_reg_write(ah,
-			   get_unaligned_le32(common->macaddr),
-			   AR5K_STA_ID0);
-	ath5k_hw_reg_write(ah,
-			   staid1_flags | get_unaligned_le16(common->macaddr + 4),
-			   AR5K_STA_ID1);
-
-
 	/*
-	 * Configure PCU
+	 * Initialize PCU
 	 */
-
-	/* Restore bssid and bssid mask */
-	ath5k_hw_set_bssid(ah);
-
-	/* Set PCU config */
-	ath5k_hw_set_opmode(ah, op_mode);
-
-	/* Clear any pending interrupts
-	 * PISR/SISR Not available on 5210 */
-	if (ah->ah_version != AR5K_AR5210)
-		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
-
-	/* Set RSSI/BRSSI thresholds
-	 *
-	 * Note: If we decide to set this value
-	 * dynamically, keep in mind that when AR5K_RSSI_THR
-	 * register is read, it might return 0x40 if we haven't
-	 * written anything to it.  Also, BMISS RSSI threshold is zeroed.
-	 * So doing a save/restore procedure here isn't the right
-	 * choice. Instead, store it in ath5k_hw */
-	ath5k_hw_reg_write(ah, (AR5K_TUNE_RSSI_THRES |
-				AR5K_TUNE_BMISS_THRES <<
-				AR5K_RSSI_THR_BMISS_S),
-				AR5K_RSSI_THR);
-
-	/* MIC QoS support */
-	if (ah->ah_mac_srev >= AR5K_SREV_AR2413) {
-		ath5k_hw_reg_write(ah, 0x000100aa, AR5K_MIC_QOS_CTL);
-		ath5k_hw_reg_write(ah, 0x00003210, AR5K_MIC_QOS_SEL);
-	}
-
-	/* QoS NOACK Policy */
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM(2, AR5K_QOS_NOACK_2BIT_VALUES) |
-			AR5K_REG_SM(5, AR5K_QOS_NOACK_BIT_OFFSET)  |
-			AR5K_REG_SM(0, AR5K_QOS_NOACK_BYTE_OFFSET),
-			AR5K_QOS_NOACK);
-	}
-
+	ath5k_hw_pcu_init(ah, op_mode, mode);
 
 	/*
-	 * Configure PHY
+	 * Initialize PHY
 	 */
-
-	/* Set channel on PHY */
-	ret = ath5k_hw_channel(ah, channel);
-	if (ret)
+	ret = ath5k_hw_phy_init(ah, channel, mode, false);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc,
+			"failed to initialize PHY (%i) !\n", ret);
 		return ret;
-
-	/*
-	 * Enable the PHY and wait until completion
-	 * This includes BaseBand and Synthesizer
-	 * activation.
-	 */
-	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
-
-	/*
-	 * On 5211+ read activation -> rx delay
-	 * and use it.
-	 *
-	 * TODO: Half/quarter rate support
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		u32 delay;
-		delay = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
-			AR5K_PHY_RX_DELAY_M;
-		delay = (channel->hw_value & CHANNEL_CCK) ?
-			((delay << 2) / 22) : (delay / 10);
-
-		udelay(100 + (2 * delay));
-	} else {
-		mdelay(1);
 	}
 
 	/*
-	 * Perform ADC test to see if baseband is ready
-	 * Set TX hold and check ADC test register
-	 */
-	phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
-	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
-	for (i = 0; i <= 20; i++) {
-		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
-			break;
-		udelay(200);
-	}
-	ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
-
-	/*
-	 * Start automatic gain control calibration
-	 *
-	 * During AGC calibration RX path is re-routed to
-	 * a power detector so we don't receive anything.
-	 *
-	 * This method is used to calibrate some static offsets
-	 * used together with on-the fly I/Q calibration (the
-	 * one performed via ath5k_hw_phy_calibrate), which doesn't
-	 * interrupt rx path.
-	 *
-	 * While rx path is re-routed to the power detector we also
-	 * start a noise floor calibration to measure the
-	 * card's noise floor (the noise we measure when we are not
-	 * transmitting or receiving anything).
-	 *
-	 * If we are in a noisy environment, AGC calibration may time
-	 * out and/or noise floor calibration might timeout.
-	 */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
-				AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF);
-
-	/* At the same time start I/Q calibration for QAM constellation
-	 * -no need for CCK- */
-	ah->ah_calibration = false;
-	if (!(mode == AR5K_MODE_11B)) {
-		ah->ah_calibration = true;
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_RUN);
-	}
-
-	/* Wait for gain calibration to finish (we check for I/Q calibration
-	 * during ath5k_phy_calibrate) */
-	if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
-			AR5K_PHY_AGCCTL_CAL, 0, false)) {
-		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
-			channel->center_freq);
-	}
-
-	/* Restore antenna mode */
-	ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
-
-	/* Restore slot time and ACK timeouts */
-	if (ah->ah_coverage_class > 0)
-		ath5k_hw_set_coverage_class(ah, ah->ah_coverage_class);
-
-	/*
 	 * Configure QCUs/DCUs
 	 */
+	ret = ath5k_hw_init_queues(ah);
+	if (ret)
+		return ret;
 
-	/* TODO: HW Compression support for data queues */
-	/* TODO: Burst prefetch for data queues */
-
-	/*
-	 * Reset queues and start beacon timers at the end of the reset routine
-	 * This also sets QCU mask on each DCU for 1:1 qcu to dcu mapping
-	 * Note: If we want we can assign multiple qcus on one dcu.
-	 */
-	for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
-		ret = ath5k_hw_reset_tx_queue(ah, i);
-		if (ret) {
-			ATH5K_ERR(ah->ah_sc,
-				"failed to reset TX queue #%d\n", i);
-			return ret;
-		}
-	}
-
-
-	/*
-	 * Configure DMA/Interrupts
-	 */
 
 	/*
-	 * Set Rx/Tx DMA Configuration
-	 *
-	 * Set standard DMA size (128). Note that
-	 * a DMA size of 512 causes rx overruns and tx errors
-	 * on pci-e cards (tested on 5424 but since rx overruns
-	 * also occur on 5416/5418 with madwifi we set 128
-	 * for all PCI-E cards to be safe).
-	 *
-	 * XXX: need to check 5210 for this
-	 * TODO: Check out tx triger level, it's always 64 on dumps but I
-	 * guess we can tweak it and see how it goes ;-)
+	 * Initialize DMA/Interrupts
 	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
-			AR5K_TXCFG_SDMAMR, AR5K_DMASIZE_128B);
-		AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
-			AR5K_RXCFG_SDMAMW, AR5K_DMASIZE_128B);
-	}
+	ath5k_hw_dma_init(ah);
 
-	/* Pre-enable interrupts on 5211/5212*/
-	if (ah->ah_version != AR5K_AR5210)
-		ath5k_hw_set_imr(ah, ah->ah_imr);
 
 	/* Enable 32KHz clock function for AR5212+ chips
 	 * Set clocks to 32KHz operation and use an
diff --git a/drivers/net/wireless/ath/ath5k/rfbuffer.h b/drivers/net/wireless/ath/ath5k/rfbuffer.h
index 3ac4cff4239..16b67e84906 100644
--- a/drivers/net/wireless/ath/ath5k/rfbuffer.h
+++ b/drivers/net/wireless/ath/ath5k/rfbuffer.h
@@ -51,7 +51,7 @@
 struct ath5k_ini_rfbuffer {
 	u8	rfb_bank;		/* RF Bank number */
 	u16	rfb_ctrl_register;	/* RF Buffer control register */
-	u32	rfb_mode_data[5];	/* RF Buffer data for each mode */
+	u32	rfb_mode_data[3];	/* RF Buffer data for each mode */
 };
 
 /*
@@ -79,8 +79,10 @@ struct ath5k_rf_reg {
  * life easier by using an index for each register
  * instead of a full rfb_field */
 enum ath5k_rf_regs_idx {
+	/* BANK 2 */
+	AR5K_RF_TURBO = 0,
 	/* BANK 6 */
-	AR5K_RF_OB_2GHZ = 0,
+	AR5K_RF_OB_2GHZ,
 	AR5K_RF_OB_5GHZ,
 	AR5K_RF_DB_2GHZ,
 	AR5K_RF_DB_5GHZ,
@@ -134,6 +136,9 @@ enum ath5k_rf_regs_idx {
 * RF5111 (Sombrero) *
 \*******************/
 
+/* BANK 2				len  pos col */
+#define	AR5K_RF5111_RF_TURBO		{ 1, 3,   0 }
+
 /* BANK 6				len  pos col */
 #define	AR5K_RF5111_OB_2GHZ		{ 3, 119, 0 }
 #define	AR5K_RF5111_DB_2GHZ		{ 3, 122, 0 }
@@ -158,6 +163,7 @@ enum ath5k_rf_regs_idx {
 #define	AR5K_RF5111_MAX_TIME		{ 2, 49,  0 }
 
 static const struct ath5k_rf_reg rf_regs_5111[] = {
+	{2, AR5K_RF_TURBO,		AR5K_RF5111_RF_TURBO},
 	{6, AR5K_RF_OB_2GHZ,		AR5K_RF5111_OB_2GHZ},
 	{6, AR5K_RF_DB_2GHZ,		AR5K_RF5111_DB_2GHZ},
 	{6, AR5K_RF_OB_5GHZ,		AR5K_RF5111_OB_5GHZ},
@@ -177,97 +183,52 @@ static const struct ath5k_rf_reg rf_regs_5111[] = {
 
 /* Default mode specific settings */
 static const struct ath5k_ini_rfbuffer rfb_5111[] = {
-	{ 0, 0x989c,
-	/*     mode a/XR  mode aTurbo    mode b     mode g    mode gTurbo */
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00380000, 0x00380000, 0x00380000, 0x00380000, 0x00380000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 0, 0x989c,
-	    { 0x00000000, 0x00000000, 0x000000c0, 0x00000080, 0x00000080 } },
-	{ 0, 0x989c,
-	    { 0x000400f9, 0x000400f9, 0x000400ff, 0x000400fd, 0x000400fd } },
-	{ 0, 0x98d4,
-	    { 0x00000000, 0x00000000, 0x00000004, 0x00000004, 0x00000004 } },
-	{ 1, 0x98d4,
-	    { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
-	{ 2, 0x98d4,
-	    { 0x00000010, 0x00000014, 0x00000010, 0x00000010, 0x00000014 } },
-	{ 3, 0x98d8,
-	    { 0x00601068, 0x00601068, 0x00601068, 0x00601068, 0x00601068 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
-	{ 6, 0x989c,
-	    { 0x04000000, 0x04000000, 0x04000000, 0x04000000, 0x04000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x0a000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x003800c0, 0x00380080, 0x023800c0, 0x003800c0, 0x003800c0 } },
-	{ 6, 0x989c,
-	    { 0x00020006, 0x00020006, 0x00000006, 0x00020006, 0x00020006 } },
-	{ 6, 0x989c,
-	    { 0x00000089, 0x00000089, 0x00000089, 0x00000089, 0x00000089 } },
-	{ 6, 0x989c,
-	    { 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0, 0x000000a0 } },
-	{ 6, 0x989c,
-	    { 0x00040007, 0x00040007, 0x00040007, 0x00040007, 0x00040007 } },
-	{ 6, 0x98d4,
-	    { 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a } },
-	{ 7, 0x989c,
-	    { 0x00000040, 0x00000048, 0x00000040, 0x00000040, 0x00000040 } },
-	{ 7, 0x989c,
-	    { 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 } },
-	{ 7, 0x989c,
-	    { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } },
-	{ 7, 0x989c,
-	    { 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f, 0x0000004f } },
-	{ 7, 0x989c,
-	    { 0x000000f1, 0x000000f1, 0x00000061, 0x000000f1, 0x000000f1 } },
-	{ 7, 0x989c,
-	    { 0x0000904f, 0x0000904f, 0x0000904c, 0x0000904f, 0x0000904f } },
-	{ 7, 0x989c,
-	    { 0x0000125a, 0x0000125a, 0x0000129a, 0x0000125a, 0x0000125a } },
-	{ 7, 0x98cc,
-	    { 0x0000000e, 0x0000000e, 0x0000000f, 0x0000000e, 0x0000000e } },
+	/* BANK / C.R.     A/XR         B           G      */
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00380000, 0x00380000, 0x00380000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 0, 0x989c, { 0x00000000, 0x000000c0, 0x00000080 } },
+	{ 0, 0x989c, { 0x000400f9, 0x000400ff, 0x000400fd } },
+	{ 0, 0x98d4, { 0x00000000, 0x00000004, 0x00000004 } },
+	{ 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+	{ 2, 0x98d4, { 0x00000010, 0x00000010, 0x00000010 } },
+	{ 3, 0x98d8, { 0x00601068, 0x00601068, 0x00601068 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } },
+	{ 6, 0x989c, { 0x04000000, 0x04000000, 0x04000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x0a000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x003800c0, 0x023800c0, 0x003800c0 } },
+	{ 6, 0x989c, { 0x00020006, 0x00000006, 0x00020006 } },
+	{ 6, 0x989c, { 0x00000089, 0x00000089, 0x00000089 } },
+	{ 6, 0x989c, { 0x000000a0, 0x000000a0, 0x000000a0 } },
+	{ 6, 0x989c, { 0x00040007, 0x00040007, 0x00040007 } },
+	{ 6, 0x98d4, { 0x0000001a, 0x0000001a, 0x0000001a } },
+	{ 7, 0x989c, { 0x00000040, 0x00000040, 0x00000040 } },
+	{ 7, 0x989c, { 0x00000010, 0x00000010, 0x00000010 } },
+	{ 7, 0x989c, { 0x00000008, 0x00000008, 0x00000008 } },
+	{ 7, 0x989c, { 0x0000004f, 0x0000004f, 0x0000004f } },
+	{ 7, 0x989c, { 0x000000f1, 0x00000061, 0x000000f1 } },
+	{ 7, 0x989c, { 0x0000904f, 0x0000904c, 0x0000904f } },
+	{ 7, 0x989c, { 0x0000125a, 0x0000129a, 0x0000125a } },
+	{ 7, 0x98cc, { 0x0000000e, 0x0000000f, 0x0000000e } },
 };
 
 
@@ -276,6 +237,9 @@ static const struct ath5k_ini_rfbuffer rfb_5111[] = {
 * RF5112/RF2112 (Derby) *
 \***********************/
 
+/* BANK 2 (Common)			len  pos col */
+#define	AR5K_RF5112X_RF_TURBO		{ 1, 1,   2 }
+
 /* BANK 7 (Common)			len  pos col */
 #define	AR5K_RF5112X_GAIN_I		{ 6, 14,  0 }
 #define	AR5K_RF5112X_MIXVGA_OVR		{ 1, 36,  0 }
@@ -307,6 +271,7 @@ static const struct ath5k_ini_rfbuffer rfb_5111[] = {
 #define AR5K_RF5112_PWD(_n)		{ 1, (302 - _n), 3 }
 
 static const struct ath5k_rf_reg rf_regs_5112[] = {
+	{2, AR5K_RF_TURBO,		AR5K_RF5112X_RF_TURBO},
 	{6, AR5K_RF_OB_2GHZ,		AR5K_RF5112_OB_2GHZ},
 	{6, AR5K_RF_DB_2GHZ,		AR5K_RF5112_DB_2GHZ},
 	{6, AR5K_RF_OB_5GHZ,		AR5K_RF5112_OB_5GHZ},
@@ -335,115 +300,61 @@ static const struct ath5k_rf_reg rf_regs_5112[] = {
 
 /* Default mode specific settings */
 static const struct ath5k_ini_rfbuffer rfb_5112[] = {
-	{ 1, 0x98d4,
-	/*     mode a/XR  mode aTurbo    mode b     mode g    mode gTurbo */
-	    { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
-	{ 2, 0x98d0,
-	    { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } },
-	{ 3, 0x98dc,
-	    { 0x00a0c0c0, 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0, 0x00e0c0c0 } },
-	{ 6, 0x989c,
-	    { 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000, 0x00a00000 } },
-	{ 6, 0x989c,
-	    { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00660000, 0x00660000, 0x00660000, 0x00660000, 0x00660000 } },
-	{ 6, 0x989c,
-	    { 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000, 0x00db0000 } },
-	{ 6, 0x989c,
-	    { 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000, 0x00f10000 } },
-	{ 6, 0x989c,
-	    { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
-	{ 6, 0x989c,
-	    { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
-	{ 6, 0x989c,
-	    { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
-	{ 6, 0x989c,
-	    { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
-	{ 6, 0x989c,
-	    { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
-	{ 6, 0x989c,
-	    { 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000, 0x008b0000 } },
-	{ 6, 0x989c,
-	    { 0x00600000, 0x00600000, 0x00600000, 0x00600000, 0x00600000 } },
-	{ 6, 0x989c,
-	    { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
-	{ 6, 0x989c,
-	    { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } },
-	{ 6, 0x989c,
-	    { 0x00640000, 0x00640000, 0x00640000, 0x00640000, 0x00640000 } },
-	{ 6, 0x989c,
-	    { 0x00200000, 0x00200000, 0x00200000, 0x00200000, 0x00200000 } },
-	{ 6, 0x989c,
-	    { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } },
-	{ 6, 0x989c,
-	    { 0x00250000, 0x00250000, 0x00250000, 0x00250000, 0x00250000 } },
-	{ 6, 0x989c,
-	    { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
-	{ 6, 0x989c,
-	    { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
-	{ 6, 0x989c,
-	    { 0x00510000, 0x00510000, 0x00510000, 0x00510000, 0x00510000 } },
-	{ 6, 0x989c,
-	    { 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000, 0x1c040000 } },
-	{ 6, 0x989c,
-	    { 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000, 0x000a0000 } },
-	{ 6, 0x989c,
-	    { 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000, 0x00a10000 } },
-	{ 6, 0x989c,
-	    { 0x00400000, 0x00400000, 0x00400000, 0x00400000, 0x00400000 } },
-	{ 6, 0x989c,
-	    { 0x03090000, 0x03090000, 0x03090000, 0x03090000, 0x03090000 } },
-	{ 6, 0x989c,
-	    { 0x06000000, 0x06000000, 0x06000000, 0x06000000, 0x06000000 } },
-	{ 6, 0x989c,
-	    { 0x000000b0, 0x000000b0, 0x000000a8, 0x000000a8, 0x000000a8 } },
-	{ 6, 0x989c,
-	    { 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e, 0x0000002e } },
-	{ 6, 0x989c,
-	    { 0x006c4a41, 0x006c4a41, 0x006c4af1, 0x006c4a61, 0x006c4a61 } },
-	{ 6, 0x989c,
-	    { 0x0050892a, 0x0050892a, 0x0050892b, 0x0050892b, 0x0050892b } },
-	{ 6, 0x989c,
-	    { 0x00842400, 0x00842400, 0x00842400, 0x00842400, 0x00842400 } },
-	{ 6, 0x989c,
-	    { 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200, 0x00c69200 } },
-	{ 6, 0x98d0,
-	    { 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c, 0x0002000c } },
-	{ 7, 0x989c,
-	    { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } },
-	{ 7, 0x989c,
-	    { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } },
-	{ 7, 0x989c,
-	    { 0x0000000a, 0x0000000a, 0x00000012, 0x00000012, 0x00000012 } },
-	{ 7, 0x989c,
-	    { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
-	{ 7, 0x989c,
-	    { 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1, 0x000000c1 } },
-	{ 7, 0x989c,
-	    { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
-	{ 7, 0x989c,
-	    { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } },
-	{ 7, 0x989c,
-	    { 0x00000022, 0x00000022, 0x00000022, 0x00000022, 0x00000022 } },
-	{ 7, 0x989c,
-	    { 0x00000092, 0x00000092, 0x00000092, 0x00000092, 0x00000092 } },
-	{ 7, 0x989c,
-	    { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } },
-	{ 7, 0x989c,
-	    { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } },
-	{ 7, 0x989c,
-	    { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } },
-	{ 7, 0x98c4,
-	    { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
+	/* BANK / C.R.     A/XR         B           G      */
+	{ 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+	{ 2, 0x98d0, { 0x03060408, 0x03060408, 0x03060408 } },
+	{ 3, 0x98dc, { 0x00a0c0c0, 0x00e0c0c0, 0x00e0c0c0 } },
+	{ 6, 0x989c, { 0x00a00000, 0x00a00000, 0x00a00000 } },
+	{ 6, 0x989c, { 0x000a0000, 0x000a0000, 0x000a0000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00660000, 0x00660000, 0x00660000 } },
+	{ 6, 0x989c, { 0x00db0000, 0x00db0000, 0x00db0000 } },
+	{ 6, 0x989c, { 0x00f10000, 0x00f10000, 0x00f10000 } },
+	{ 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } },
+	{ 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } },
+	{ 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } },
+	{ 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+	{ 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+	{ 6, 0x989c, { 0x008b0000, 0x008b0000, 0x008b0000 } },
+	{ 6, 0x989c, { 0x00600000, 0x00600000, 0x00600000 } },
+	{ 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } },
+	{ 6, 0x989c, { 0x00840000, 0x00840000, 0x00840000 } },
+	{ 6, 0x989c, { 0x00640000, 0x00640000, 0x00640000 } },
+	{ 6, 0x989c, { 0x00200000, 0x00200000, 0x00200000 } },
+	{ 6, 0x989c, { 0x00240000, 0x00240000, 0x00240000 } },
+	{ 6, 0x989c, { 0x00250000, 0x00250000, 0x00250000 } },
+	{ 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } },
+	{ 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } },
+	{ 6, 0x989c, { 0x00510000, 0x00510000, 0x00510000 } },
+	{ 6, 0x989c, { 0x1c040000, 0x1c040000, 0x1c040000 } },
+	{ 6, 0x989c, { 0x000a0000, 0x000a0000, 0x000a0000 } },
+	{ 6, 0x989c, { 0x00a10000, 0x00a10000, 0x00a10000 } },
+	{ 6, 0x989c, { 0x00400000, 0x00400000, 0x00400000 } },
+	{ 6, 0x989c, { 0x03090000, 0x03090000, 0x03090000 } },
+	{ 6, 0x989c, { 0x06000000, 0x06000000, 0x06000000 } },
+	{ 6, 0x989c, { 0x000000b0, 0x000000a8, 0x000000a8 } },
+	{ 6, 0x989c, { 0x0000002e, 0x0000002e, 0x0000002e } },
+	{ 6, 0x989c, { 0x006c4a41, 0x006c4af1, 0x006c4a61 } },
+	{ 6, 0x989c, { 0x0050892a, 0x0050892b, 0x0050892b } },
+	{ 6, 0x989c, { 0x00842400, 0x00842400, 0x00842400 } },
+	{ 6, 0x989c, { 0x00c69200, 0x00c69200, 0x00c69200 } },
+	{ 6, 0x98d0, { 0x0002000c, 0x0002000c, 0x0002000c } },
+	{ 7, 0x989c, { 0x00000094, 0x00000094, 0x00000094 } },
+	{ 7, 0x989c, { 0x00000091, 0x00000091, 0x00000091 } },
+	{ 7, 0x989c, { 0x0000000a, 0x00000012, 0x00000012 } },
+	{ 7, 0x989c, { 0x00000080, 0x00000080, 0x00000080 } },
+	{ 7, 0x989c, { 0x000000c1, 0x000000c1, 0x000000c1 } },
+	{ 7, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } },
+	{ 7, 0x989c, { 0x000000f0, 0x000000f0, 0x000000f0 } },
+	{ 7, 0x989c, { 0x00000022, 0x00000022, 0x00000022 } },
+	{ 7, 0x989c, { 0x00000092, 0x00000092, 0x00000092 } },
+	{ 7, 0x989c, { 0x000000d4, 0x000000d4, 0x000000d4 } },
+	{ 7, 0x989c, { 0x000014cc, 0x000014cc, 0x000014cc } },
+	{ 7, 0x989c, { 0x0000048c, 0x0000048c, 0x0000048c } },
+	{ 7, 0x98c4, { 0x00000003, 0x00000003, 0x00000003 } },
 };
 
 /* RFX112A (Derby 2) */
@@ -477,6 +388,7 @@ static const struct ath5k_ini_rfbuffer rfb_5112[] = {
 #define	AR5K_RF5112A_XB5_LVL		{ 2, 3,	  3 }
 
 static const struct ath5k_rf_reg rf_regs_5112a[] = {
+	{2, AR5K_RF_TURBO,		AR5K_RF5112X_RF_TURBO},
 	{6, AR5K_RF_OB_2GHZ,		AR5K_RF5112A_OB_2GHZ},
 	{6, AR5K_RF_DB_2GHZ,		AR5K_RF5112A_DB_2GHZ},
 	{6, AR5K_RF_OB_5GHZ,		AR5K_RF5112A_OB_5GHZ},
@@ -515,119 +427,63 @@ static const struct ath5k_rf_reg rf_regs_5112a[] = {
 
 /* Default mode specific settings */
 static const struct ath5k_ini_rfbuffer rfb_5112a[] = {
-	{ 1, 0x98d4,
-	/*     mode a/XR  mode aTurbo    mode b     mode g    mode gTurbo */
-	    { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
-	{ 2, 0x98d0,
-	    { 0x03060408, 0x03070408, 0x03060408, 0x03060408, 0x03070408 } },
-	{ 3, 0x98dc,
-	    { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
-	{ 6, 0x989c,
-	    { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00800000, 0x00800000, 0x00800000, 0x00800000, 0x00800000 } },
-	{ 6, 0x989c,
-	    { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
-	{ 6, 0x989c,
-	    { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00180000, 0x00180000, 0x00180000, 0x00180000, 0x00180000 } },
-	{ 6, 0x989c,
-	    { 0x00600000, 0x00600000, 0x006e0000, 0x006e0000, 0x006e0000 } },
-	{ 6, 0x989c,
-	    { 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000, 0x00c70000 } },
-	{ 6, 0x989c,
-	    { 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000, 0x004b0000 } },
-	{ 6, 0x989c,
-	    { 0x04480000, 0x04480000, 0x04480000, 0x04480000, 0x04480000 } },
-	{ 6, 0x989c,
-	    { 0x004c0000, 0x004c0000, 0x004c0000, 0x004c0000, 0x004c0000 } },
-	{ 6, 0x989c,
-	    { 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000, 0x00e40000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000, 0x00fc0000 } },
-	{ 6, 0x989c,
-	    { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
-	{ 6, 0x989c,
-	    { 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000, 0x043f0000 } },
-	{ 6, 0x989c,
-	    { 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000, 0x000c0000 } },
-	{ 6, 0x989c,
-	    { 0x02190000, 0x02190000, 0x02190000, 0x02190000, 0x02190000 } },
-	{ 6, 0x989c,
-	    { 0x00240000, 0x00240000, 0x00240000, 0x00240000, 0x00240000 } },
-	{ 6, 0x989c,
-	    { 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000, 0x00b40000 } },
-	{ 6, 0x989c,
-	    { 0x00990000, 0x00990000, 0x00990000, 0x00990000, 0x00990000 } },
-	{ 6, 0x989c,
-	    { 0x00500000, 0x00500000, 0x00500000, 0x00500000, 0x00500000 } },
-	{ 6, 0x989c,
-	    { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
-	{ 6, 0x989c,
-	    { 0x00120000, 0x00120000, 0x00120000, 0x00120000, 0x00120000 } },
-	{ 6, 0x989c,
-	    { 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000, 0xc0320000 } },
-	{ 6, 0x989c,
-	    { 0x01740000, 0x01740000, 0x01740000, 0x01740000, 0x01740000 } },
-	{ 6, 0x989c,
-	    { 0x00110000, 0x00110000, 0x00110000, 0x00110000, 0x00110000 } },
-	{ 6, 0x989c,
-	    { 0x86280000, 0x86280000, 0x86280000, 0x86280000, 0x86280000 } },
-	{ 6, 0x989c,
-	    { 0x31840000, 0x31840000, 0x31840000, 0x31840000, 0x31840000 } },
-	{ 6, 0x989c,
-	    { 0x00f20080, 0x00f20080, 0x00f20080, 0x00f20080, 0x00f20080 } },
-	{ 6, 0x989c,
-	    { 0x00270019, 0x00270019, 0x00270019, 0x00270019, 0x00270019 } },
-	{ 6, 0x989c,
-	    { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2, 0x000000b2 } },
-	{ 6, 0x989c,
-	    { 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084, 0x00b02084 } },
-	{ 6, 0x989c,
-	    { 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4, 0x004125a4 } },
-	{ 6, 0x989c,
-	    { 0x00119220, 0x00119220, 0x00119220, 0x00119220, 0x00119220 } },
-	{ 6, 0x989c,
-	    { 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800, 0x001a4800 } },
-	{ 6, 0x98d8,
-	    { 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230, 0x000b0230 } },
-	{ 7, 0x989c,
-	    { 0x00000094, 0x00000094, 0x00000094, 0x00000094, 0x00000094 } },
-	{ 7, 0x989c,
-	    { 0x00000091, 0x00000091, 0x00000091, 0x00000091, 0x00000091 } },
-	{ 7, 0x989c,
-	    { 0x00000012, 0x00000012, 0x00000012, 0x00000012, 0x00000012 } },
-	{ 7, 0x989c,
-	    { 0x00000080, 0x00000080, 0x00000080, 0x00000080, 0x00000080 } },
-	{ 7, 0x989c,
-	    { 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9, 0x000000d9 } },
-	{ 7, 0x989c,
-	    { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
-	{ 7, 0x989c,
-	    { 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0, 0x000000f0 } },
-	{ 7, 0x989c,
-	    { 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2, 0x000000a2 } },
-	{ 7, 0x989c,
-	    { 0x00000052, 0x00000052, 0x00000052, 0x00000052, 0x00000052 } },
-	{ 7, 0x989c,
-	    { 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4, 0x000000d4 } },
-	{ 7, 0x989c,
-	    { 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc, 0x000014cc } },
-	{ 7, 0x989c,
-	    { 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c, 0x0000048c } },
-	{ 7, 0x98c4,
-	    { 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003 } },
+	/* BANK / C.R.     A/XR         B           G      */
+	{ 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+	{ 2, 0x98d0, { 0x03060408, 0x03060408, 0x03060408 } },
+	{ 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+	{ 6, 0x989c, { 0x0f000000, 0x0f000000, 0x0f000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00800000, 0x00800000, 0x00800000 } },
+	{ 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } },
+	{ 6, 0x989c, { 0x00010000, 0x00010000, 0x00010000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00180000, 0x00180000, 0x00180000 } },
+	{ 6, 0x989c, { 0x00600000, 0x006e0000, 0x006e0000 } },
+	{ 6, 0x989c, { 0x00c70000, 0x00c70000, 0x00c70000 } },
+	{ 6, 0x989c, { 0x004b0000, 0x004b0000, 0x004b0000 } },
+	{ 6, 0x989c, { 0x04480000, 0x04480000, 0x04480000 } },
+	{ 6, 0x989c, { 0x004c0000, 0x004c0000, 0x004c0000 } },
+	{ 6, 0x989c, { 0x00e40000, 0x00e40000, 0x00e40000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00fc0000, 0x00fc0000, 0x00fc0000 } },
+	{ 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+	{ 6, 0x989c, { 0x043f0000, 0x043f0000, 0x043f0000 } },
+	{ 6, 0x989c, { 0x000c0000, 0x000c0000, 0x000c0000 } },
+	{ 6, 0x989c, { 0x02190000, 0x02190000, 0x02190000 } },
+	{ 6, 0x989c, { 0x00240000, 0x00240000, 0x00240000 } },
+	{ 6, 0x989c, { 0x00b40000, 0x00b40000, 0x00b40000 } },
+	{ 6, 0x989c, { 0x00990000, 0x00990000, 0x00990000 } },
+	{ 6, 0x989c, { 0x00500000, 0x00500000, 0x00500000 } },
+	{ 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } },
+	{ 6, 0x989c, { 0x00120000, 0x00120000, 0x00120000 } },
+	{ 6, 0x989c, { 0xc0320000, 0xc0320000, 0xc0320000 } },
+	{ 6, 0x989c, { 0x01740000, 0x01740000, 0x01740000 } },
+	{ 6, 0x989c, { 0x00110000, 0x00110000, 0x00110000 } },
+	{ 6, 0x989c, { 0x86280000, 0x86280000, 0x86280000 } },
+	{ 6, 0x989c, { 0x31840000, 0x31840000, 0x31840000 } },
+	{ 6, 0x989c, { 0x00f20080, 0x00f20080, 0x00f20080 } },
+	{ 6, 0x989c, { 0x00270019, 0x00270019, 0x00270019 } },
+	{ 6, 0x989c, { 0x00000003, 0x00000003, 0x00000003 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x000000b2, 0x000000b2, 0x000000b2 } },
+	{ 6, 0x989c, { 0x00b02084, 0x00b02084, 0x00b02084 } },
+	{ 6, 0x989c, { 0x004125a4, 0x004125a4, 0x004125a4 } },
+	{ 6, 0x989c, { 0x00119220, 0x00119220, 0x00119220 } },
+	{ 6, 0x989c, { 0x001a4800, 0x001a4800, 0x001a4800 } },
+	{ 6, 0x98d8, { 0x000b0230, 0x000b0230, 0x000b0230 } },
+	{ 7, 0x989c, { 0x00000094, 0x00000094, 0x00000094 } },
+	{ 7, 0x989c, { 0x00000091, 0x00000091, 0x00000091 } },
+	{ 7, 0x989c, { 0x00000012, 0x00000012, 0x00000012 } },
+	{ 7, 0x989c, { 0x00000080, 0x00000080, 0x00000080 } },
+	{ 7, 0x989c, { 0x000000d9, 0x000000d9, 0x000000d9 } },
+	{ 7, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } },
+	{ 7, 0x989c, { 0x000000f0, 0x000000f0, 0x000000f0 } },
+	{ 7, 0x989c, { 0x000000a2, 0x000000a2, 0x000000a2 } },
+	{ 7, 0x989c, { 0x00000052, 0x00000052, 0x00000052 } },
+	{ 7, 0x989c, { 0x000000d4, 0x000000d4, 0x000000d4 } },
+	{ 7, 0x989c, { 0x000014cc, 0x000014cc, 0x000014cc } },
+	{ 7, 0x989c, { 0x0000048c, 0x0000048c, 0x0000048c } },
+	{ 7, 0x98c4, { 0x00000003, 0x00000003, 0x00000003 } },
 };
 
 
@@ -636,11 +492,15 @@ static const struct ath5k_ini_rfbuffer rfb_5112a[] = {
 * RF2413 (Griffin) *
 \******************/
 
+/* BANK 2				len  pos col */
+#define AR5K_RF2413_RF_TURBO		{ 1, 1,   2 }
+
 /* BANK 6 				len  pos col */
 #define	AR5K_RF2413_OB_2GHZ		{ 3, 168, 0 }
 #define	AR5K_RF2413_DB_2GHZ		{ 3, 165, 0 }
 
 static const struct ath5k_rf_reg rf_regs_2413[] = {
+	{2, AR5K_RF_TURBO,		AR5K_RF2413_RF_TURBO},
 	{6, AR5K_RF_OB_2GHZ,		AR5K_RF2413_OB_2GHZ},
 	{6, AR5K_RF_DB_2GHZ,		AR5K_RF2413_DB_2GHZ},
 };
@@ -649,73 +509,40 @@ static const struct ath5k_rf_reg rf_regs_2413[] = {
  * XXX: a/aTurbo ???
  */
 static const struct ath5k_ini_rfbuffer rfb_2413[] = {
-	{ 1, 0x98d4,
-	/*     mode a/XR  mode aTurbo    mode b     mode g    mode gTurbo */
-	    { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
-	{ 2, 0x98d0,
-	    { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } },
-	{ 3, 0x98dc,
-	    { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
-	{ 6, 0x989c,
-	    { 0xf0000000, 0xf0000000, 0xf0000000, 0xf0000000, 0xf0000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x03000000, 0x03000000, 0x03000000, 0x03000000, 0x03000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x40400000, 0x40400000, 0x40400000, 0x40400000, 0x40400000 } },
-	{ 6, 0x989c,
-	    { 0x65050000, 0x65050000, 0x65050000, 0x65050000, 0x65050000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00420000, 0x00420000, 0x00420000, 0x00420000, 0x00420000 } },
-	{ 6, 0x989c,
-	    { 0x00b50000, 0x00b50000, 0x00b50000, 0x00b50000, 0x00b50000 } },
-	{ 6, 0x989c,
-	    { 0x00030000, 0x00030000, 0x00030000, 0x00030000, 0x00030000 } },
-	{ 6, 0x989c,
-	    { 0x00f70000, 0x00f70000, 0x00f70000, 0x00f70000, 0x00f70000 } },
-	{ 6, 0x989c,
-	    { 0x009d0000, 0x009d0000, 0x009d0000, 0x009d0000, 0x009d0000 } },
-	{ 6, 0x989c,
-	    { 0x00220000, 0x00220000, 0x00220000, 0x00220000, 0x00220000 } },
-	{ 6, 0x989c,
-	    { 0x04220000, 0x04220000, 0x04220000, 0x04220000, 0x04220000 } },
-	{ 6, 0x989c,
-	    { 0x00230018, 0x00230018, 0x00230018, 0x00230018, 0x00230018 } },
-	{ 6, 0x989c,
-	    { 0x00280000, 0x00280000, 0x00280060, 0x00280060, 0x00280060 } },
-	{ 6, 0x989c,
-	    { 0x005000c0, 0x005000c0, 0x005000c3, 0x005000c3, 0x005000c3 } },
-	{ 6, 0x989c,
-	    { 0x0004007f, 0x0004007f, 0x0004007f, 0x0004007f, 0x0004007f } },
-	{ 6, 0x989c,
-	    { 0x00000458, 0x00000458, 0x00000458, 0x00000458, 0x00000458 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x0000c000, 0x0000c000, 0x0000c000, 0x0000c000, 0x0000c000 } },
-	{ 6, 0x98d8,
-	    { 0x00400230, 0x00400230, 0x00400230, 0x00400230, 0x00400230 } },
-	{ 7, 0x989c,
-	    { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
-	{ 7, 0x989c,
-	    { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
-	{ 7, 0x98cc,
-	    { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+	/* BANK / C.R.     A/XR         B           G      */
+	{ 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+	{ 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } },
+	{ 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+	{ 6, 0x989c, { 0xf0000000, 0xf0000000, 0xf0000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x03000000, 0x03000000, 0x03000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x40400000, 0x40400000, 0x40400000 } },
+	{ 6, 0x989c, { 0x65050000, 0x65050000, 0x65050000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00420000, 0x00420000, 0x00420000 } },
+	{ 6, 0x989c, { 0x00b50000, 0x00b50000, 0x00b50000 } },
+	{ 6, 0x989c, { 0x00030000, 0x00030000, 0x00030000 } },
+	{ 6, 0x989c, { 0x00f70000, 0x00f70000, 0x00f70000 } },
+	{ 6, 0x989c, { 0x009d0000, 0x009d0000, 0x009d0000 } },
+	{ 6, 0x989c, { 0x00220000, 0x00220000, 0x00220000 } },
+	{ 6, 0x989c, { 0x04220000, 0x04220000, 0x04220000 } },
+	{ 6, 0x989c, { 0x00230018, 0x00230018, 0x00230018 } },
+	{ 6, 0x989c, { 0x00280000, 0x00280060, 0x00280060 } },
+	{ 6, 0x989c, { 0x005000c0, 0x005000c3, 0x005000c3 } },
+	{ 6, 0x989c, { 0x0004007f, 0x0004007f, 0x0004007f } },
+	{ 6, 0x989c, { 0x00000458, 0x00000458, 0x00000458 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x0000c000, 0x0000c000, 0x0000c000 } },
+	{ 6, 0x98d8, { 0x00400230, 0x00400230, 0x00400230 } },
+	{ 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+	{ 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+	{ 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
 };
 
 
@@ -724,88 +551,57 @@ static const struct ath5k_ini_rfbuffer rfb_2413[] = {
 * RF2315/RF2316 (Cobra SoC) *
 \***************************/
 
+/* BANK 2				len  pos col */
+#define	AR5K_RF2316_RF_TURBO		{ 1, 1,   2 }
+
 /* BANK 6				len  pos col */
 #define	AR5K_RF2316_OB_2GHZ		{ 3, 178, 0 }
 #define	AR5K_RF2316_DB_2GHZ		{ 3, 175, 0 }
 
 static const struct ath5k_rf_reg rf_regs_2316[] = {
+	{2, AR5K_RF_TURBO,		AR5K_RF2316_RF_TURBO},
 	{6, AR5K_RF_OB_2GHZ,		AR5K_RF2316_OB_2GHZ},
 	{6, AR5K_RF_DB_2GHZ,		AR5K_RF2316_DB_2GHZ},
 };
 
 /* Default mode specific settings */
 static const struct ath5k_ini_rfbuffer rfb_2316[] = {
-	{ 1, 0x98d4,
-	/*     mode a/XR  mode aTurbo    mode b     mode g    mode gTurbo */
-	    { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
-	{ 2, 0x98d0,
-	    { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } },
-	{ 3, 0x98dc,
-	    { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000 } },
-	{ 6, 0x989c,
-	    { 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000, 0x0f000000 } },
-	{ 6, 0x989c,
-	    { 0x02000000, 0x02000000, 0x02000000, 0x02000000, 0x02000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0xf8000000, 0xf8000000, 0xf8000000, 0xf8000000, 0xf8000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x95150000, 0x95150000, 0x95150000, 0x95150000, 0x95150000 } },
-	{ 6, 0x989c,
-	    { 0xc1000000, 0xc1000000, 0xc1000000, 0xc1000000, 0xc1000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00080000, 0x00080000, 0x00080000, 0x00080000, 0x00080000 } },
-	{ 6, 0x989c,
-	    { 0x00d50000, 0x00d50000, 0x00d50000, 0x00d50000, 0x00d50000 } },
-	{ 6, 0x989c,
-	    { 0x000e0000, 0x000e0000, 0x000e0000, 0x000e0000, 0x000e0000 } },
-	{ 6, 0x989c,
-	    { 0x00dc0000, 0x00dc0000, 0x00dc0000, 0x00dc0000, 0x00dc0000 } },
-	{ 6, 0x989c,
-	    { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } },
-	{ 6, 0x989c,
-	    { 0x008a0000, 0x008a0000, 0x008a0000, 0x008a0000, 0x008a0000 } },
-	{ 6, 0x989c,
-	    { 0x10880000, 0x10880000, 0x10880000, 0x10880000, 0x10880000 } },
-	{ 6, 0x989c,
-	    { 0x008c0060, 0x008c0060, 0x008c0060, 0x008c0060, 0x008c0060 } },
-	{ 6, 0x989c,
-	    { 0x00a00000, 0x00a00000, 0x00a00080, 0x00a00080, 0x00a00080 } },
-	{ 6, 0x989c,
-	    { 0x00400000, 0x00400000, 0x0040000d, 0x0040000d, 0x0040000d } },
-	{ 6, 0x989c,
-	    { 0x00110400, 0x00110400, 0x00110400, 0x00110400, 0x00110400 } },
-	{ 6, 0x989c,
-	    { 0x00000060, 0x00000060, 0x00000060, 0x00000060, 0x00000060 } },
-	{ 6, 0x989c,
-	    { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
-	{ 6, 0x989c,
-	    { 0x00000b00, 0x00000b00, 0x00000b00, 0x00000b00, 0x00000b00 } },
-	{ 6, 0x989c,
-	    { 0x00000be8, 0x00000be8, 0x00000be8, 0x00000be8, 0x00000be8 } },
-	{ 6, 0x98c0,
-	    { 0x00010000, 0x00010000, 0x00010000, 0x00010000, 0x00010000 } },
-	{ 7, 0x989c,
-	    { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
-	{ 7, 0x989c,
-	    { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
-	{ 7, 0x98cc,
-	    { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+	/* BANK / C.R.     A/XR         B           G      */
+	{ 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+	{ 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } },
+	{ 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0xc0000000, 0xc0000000, 0xc0000000 } },
+	{ 6, 0x989c, { 0x0f000000, 0x0f000000, 0x0f000000 } },
+	{ 6, 0x989c, { 0x02000000, 0x02000000, 0x02000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0xf8000000, 0xf8000000, 0xf8000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x95150000, 0x95150000, 0x95150000 } },
+	{ 6, 0x989c, { 0xc1000000, 0xc1000000, 0xc1000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00080000, 0x00080000, 0x00080000 } },
+	{ 6, 0x989c, { 0x00d50000, 0x00d50000, 0x00d50000 } },
+	{ 6, 0x989c, { 0x000e0000, 0x000e0000, 0x000e0000 } },
+	{ 6, 0x989c, { 0x00dc0000, 0x00dc0000, 0x00dc0000 } },
+	{ 6, 0x989c, { 0x00770000, 0x00770000, 0x00770000 } },
+	{ 6, 0x989c, { 0x008a0000, 0x008a0000, 0x008a0000 } },
+	{ 6, 0x989c, { 0x10880000, 0x10880000, 0x10880000 } },
+	{ 6, 0x989c, { 0x008c0060, 0x008c0060, 0x008c0060 } },
+	{ 6, 0x989c, { 0x00a00000, 0x00a00080, 0x00a00080 } },
+	{ 6, 0x989c, { 0x00400000, 0x0040000d, 0x0040000d } },
+	{ 6, 0x989c, { 0x00110400, 0x00110400, 0x00110400 } },
+	{ 6, 0x989c, { 0x00000060, 0x00000060, 0x00000060 } },
+	{ 6, 0x989c, { 0x00000001, 0x00000001, 0x00000001 } },
+	{ 6, 0x989c, { 0x00000b00, 0x00000b00, 0x00000b00 } },
+	{ 6, 0x989c, { 0x00000be8, 0x00000be8, 0x00000be8 } },
+	{ 6, 0x98c0, { 0x00010000, 0x00010000, 0x00010000 } },
+	{ 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+	{ 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+	{ 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
 };
 
 
@@ -835,93 +631,50 @@ static const struct ath5k_rf_reg rf_regs_5413[] = {
 
 /* Default mode specific settings */
 static const struct ath5k_ini_rfbuffer rfb_5413[] = {
-	{ 1, 0x98d4,
-	/*     mode a/XR  mode aTurbo    mode b     mode g    mode gTurbo */
-	    { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
-	{ 2, 0x98d0,
-	    { 0x00000008, 0x00000008, 0x00000008, 0x00000008, 0x00000008 } },
-	{ 3, 0x98dc,
-	    { 0x00a000c0, 0x00a000c0, 0x00e000c0, 0x00e000c0, 0x00e000c0 } },
-	{ 6, 0x989c,
-	    { 0x33000000, 0x33000000, 0x33000000, 0x33000000, 0x33000000 } },
-	{ 6, 0x989c,
-	    { 0x01000000, 0x01000000, 0x01000000, 0x01000000, 0x01000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000, 0x1f000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000, 0x00b80000 } },
-	{ 6, 0x989c,
-	    { 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000, 0x00b70000 } },
-	{ 6, 0x989c,
-	    { 0x00840000, 0x00840000, 0x00840000, 0x00840000, 0x00840000 } },
-	{ 6, 0x989c,
-	    { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } },
-	{ 6, 0x989c,
-	    { 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000, 0x00c00000 } },
-	{ 6, 0x989c,
-	    { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
-	{ 6, 0x989c,
-	    { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
-	{ 6, 0x989c,
-	    { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
-	{ 6, 0x989c,
-	    { 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
-	{ 6, 0x989c,
-	    { 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000, 0x00d70000 } },
-	{ 6, 0x989c,
-	    { 0x00610000, 0x00610000, 0x00610000, 0x00610000, 0x00610000 } },
-	{ 6, 0x989c,
-	    { 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000, 0x00fe0000 } },
-	{ 6, 0x989c,
-	    { 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000, 0x00de0000 } },
-	{ 6, 0x989c,
-	    { 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000, 0x007f0000 } },
-	{ 6, 0x989c,
-	    { 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000, 0x043d0000 } },
-	{ 6, 0x989c,
-	    { 0x00770000, 0x00770000, 0x00770000, 0x00770000, 0x00770000 } },
-	{ 6, 0x989c,
-	    { 0x00440000, 0x00440000, 0x00440000, 0x00440000, 0x00440000 } },
-	{ 6, 0x989c,
-	    { 0x00980000, 0x00980000, 0x00980000, 0x00980000, 0x00980000 } },
-	{ 6, 0x989c,
-	    { 0x00100080, 0x00100080, 0x00100080, 0x00100080, 0x00100080 } },
-	{ 6, 0x989c,
-	    { 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034, 0x0005c034 } },
-	{ 6, 0x989c,
-	    { 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0, 0x003100f0 } },
-	{ 6, 0x989c,
-	    { 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f, 0x000c011f } },
-	{ 6, 0x989c,
-	    { 0x00510040, 0x00510040, 0x00510040, 0x00510040, 0x00510040 } },
-	{ 6, 0x989c,
-	    { 0x005000da, 0x005000da, 0x005000da, 0x005000da, 0x005000da } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00004044, 0x00004044, 0x00004044, 0x00004044, 0x00004044 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0, 0x000060c0 } },
-	{ 6, 0x989c,
-	    { 0x00002c00, 0x00002c00, 0x00003600, 0x00003600, 0x00002c00 } },
-	{ 6, 0x98c8,
-	    { 0x00000403, 0x00000403, 0x00040403, 0x00040403, 0x00040403 } },
-	{ 7, 0x989c,
-	    { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
-	{ 7, 0x989c,
-	    { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
-	{ 7, 0x98cc,
-	    { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+	/* BANK / C.R.     A/XR         B           G      */
+	{ 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+	{ 2, 0x98d0, { 0x00000008, 0x00000008, 0x00000008 } },
+	{ 3, 0x98dc, { 0x00a000c0, 0x00e000c0, 0x00e000c0 } },
+	{ 6, 0x989c, { 0x33000000, 0x33000000, 0x33000000 } },
+	{ 6, 0x989c, { 0x01000000, 0x01000000, 0x01000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x1f000000, 0x1f000000, 0x1f000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00b80000, 0x00b80000, 0x00b80000 } },
+	{ 6, 0x989c, { 0x00b70000, 0x00b70000, 0x00b70000 } },
+	{ 6, 0x989c, { 0x00840000, 0x00840000, 0x00840000 } },
+	{ 6, 0x989c, { 0x00980000, 0x00980000, 0x00980000 } },
+	{ 6, 0x989c, { 0x00c00000, 0x00c00000, 0x00c00000 } },
+	{ 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+	{ 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+	{ 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+	{ 6, 0x989c, { 0x00ff0000, 0x00ff0000, 0x00ff0000 } },
+	{ 6, 0x989c, { 0x00d70000, 0x00d70000, 0x00d70000 } },
+	{ 6, 0x989c, { 0x00610000, 0x00610000, 0x00610000 } },
+	{ 6, 0x989c, { 0x00fe0000, 0x00fe0000, 0x00fe0000 } },
+	{ 6, 0x989c, { 0x00de0000, 0x00de0000, 0x00de0000 } },
+	{ 6, 0x989c, { 0x007f0000, 0x007f0000, 0x007f0000 } },
+	{ 6, 0x989c, { 0x043d0000, 0x043d0000, 0x043d0000 } },
+	{ 6, 0x989c, { 0x00770000, 0x00770000, 0x00770000 } },
+	{ 6, 0x989c, { 0x00440000, 0x00440000, 0x00440000 } },
+	{ 6, 0x989c, { 0x00980000, 0x00980000, 0x00980000 } },
+	{ 6, 0x989c, { 0x00100080, 0x00100080, 0x00100080 } },
+	{ 6, 0x989c, { 0x0005c034, 0x0005c034, 0x0005c034 } },
+	{ 6, 0x989c, { 0x003100f0, 0x003100f0, 0x003100f0 } },
+	{ 6, 0x989c, { 0x000c011f, 0x000c011f, 0x000c011f } },
+	{ 6, 0x989c, { 0x00510040, 0x00510040, 0x00510040 } },
+	{ 6, 0x989c, { 0x005000da, 0x005000da, 0x005000da } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00004044, 0x00004044, 0x00004044 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x000060c0, 0x000060c0, 0x000060c0 } },
+	{ 6, 0x989c, { 0x00002c00, 0x00003600, 0x00003600 } },
+	{ 6, 0x98c8, { 0x00000403, 0x00040403, 0x00040403 } },
+	{ 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+	{ 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+	{ 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
 };
 
 
@@ -931,92 +684,59 @@ static const struct ath5k_ini_rfbuffer rfb_5413[] = {
 * AR2317 (Spider SoC)       *
 \***************************/
 
+/* BANK 2				len  pos col */
+#define AR5K_RF2425_RF_TURBO		{ 1, 1,   2 }
+
 /* BANK 6				len  pos col */
 #define	AR5K_RF2425_OB_2GHZ		{ 3, 193, 0 }
 #define	AR5K_RF2425_DB_2GHZ		{ 3, 190, 0 }
 
 static const struct ath5k_rf_reg rf_regs_2425[] = {
+	{2, AR5K_RF_TURBO,		AR5K_RF2425_RF_TURBO},
 	{6, AR5K_RF_OB_2GHZ,		AR5K_RF2425_OB_2GHZ},
 	{6, AR5K_RF_DB_2GHZ,		AR5K_RF2425_DB_2GHZ},
 };
 
 /* Default mode specific settings
- * XXX: a/aTurbo ?
  */
 static const struct ath5k_ini_rfbuffer rfb_2425[] = {
-	{ 1, 0x98d4,
-	/*     mode a/XR  mode aTurbo    mode b     mode g    mode gTurbo */
-	    { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
-	{ 2, 0x98d0,
-	    { 0x02001408, 0x02001408, 0x02001408, 0x02001408, 0x02001408 } },
-	{ 3, 0x98dc,
-	    { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
-	{ 6, 0x989c,
-	    { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } },
-	{ 6, 0x989c,
-	    { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } },
-	{ 6, 0x989c,
-	    { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
-	{ 6, 0x989c,
-	    { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } },
-	{ 6, 0x989c,
-	    { 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000 } },
-	{ 6, 0x989c,
-	    { 0x00140000, 0x00140000, 0x00140000, 0x00140000, 0x00140000 } },
-	{ 6, 0x989c,
-	    { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } },
-	{ 6, 0x989c,
-	    { 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a } },
-	{ 6, 0x989c,
-	    { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } },
-	{ 6, 0x989c,
-	    { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } },
-	{ 6, 0x989c,
-	    { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } },
-	{ 6, 0x989c,
-	    { 0x00001688, 0x00001688, 0x00001688, 0x00001688, 0x00001688 } },
-	{ 6, 0x98c4,
-	    { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
-	{ 7, 0x989c,
-	    { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
-	{ 7, 0x989c,
-	    { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
-	{ 7, 0x98cc,
-	    { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+	/* BANK / C.R.     A/XR         B           G      */
+	{ 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+	{ 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } },
+	{ 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+	{ 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } },
+	{ 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } },
+	{ 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } },
+	{ 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } },
+	{ 6, 0x989c, { 0x00e70000, 0x00e70000, 0x00e70000 } },
+	{ 6, 0x989c, { 0x00140000, 0x00140000, 0x00140000 } },
+	{ 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } },
+	{ 6, 0x989c, { 0x0007001a, 0x0007001a, 0x0007001a } },
+	{ 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } },
+	{ 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } },
+	{ 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } },
+	{ 6, 0x989c, { 0x00001688, 0x00001688, 0x00001688 } },
+	{ 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } },
+	{ 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+	{ 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+	{ 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
 };
 
 /*
@@ -1024,158 +744,85 @@ static const struct ath5k_ini_rfbuffer rfb_2425[] = {
  * bank modification and get rid of this
  */
 static const struct ath5k_ini_rfbuffer rfb_2317[] = {
-	{ 1, 0x98d4,
-	/*     mode a/XR  mode aTurbo    mode b     mode g    mode gTurbo */
-	    { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
-	{ 2, 0x98d0,
-	    { 0x02001408, 0x02011408, 0x02001408, 0x02001408, 0x02011408 } },
-	{ 3, 0x98dc,
-	    { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
-	{ 6, 0x989c,
-	    { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } },
-	{ 6, 0x989c,
-	    { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } },
-	{ 6, 0x989c,
-	    { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
-	{ 6, 0x989c,
-	    { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } },
-	{ 6, 0x989c,
-	    { 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000, 0x00e70000 } },
-	{ 6, 0x989c,
-	    { 0x00140100, 0x00140100, 0x00140100, 0x00140100, 0x00140100 } },
-	{ 6, 0x989c,
-	    { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } },
-	{ 6, 0x989c,
-	    { 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a, 0x0007001a } },
-	{ 6, 0x989c,
-	    { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } },
-	{ 6, 0x989c,
-	    { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } },
-	{ 6, 0x989c,
-	    { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } },
-	{ 6, 0x989c,
-	    { 0x00009688, 0x00009688, 0x00009688, 0x00009688, 0x00009688 } },
-	{ 6, 0x98c4,
-	    { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
-	{ 7, 0x989c,
-	    { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
-	{ 7, 0x989c,
-	    { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
-	{ 7, 0x98cc,
-	    { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+	/* BANK / C.R.     A/XR         B           G      */
+	{ 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+	{ 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } },
+	{ 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+	{ 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } },
+	{ 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } },
+	{ 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } },
+	{ 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } },
+	{ 6, 0x989c, { 0x00e70000, 0x00e70000, 0x00e70000 } },
+	{ 6, 0x989c, { 0x00140100, 0x00140100, 0x00140100 } },
+	{ 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } },
+	{ 6, 0x989c, { 0x0007001a, 0x0007001a, 0x0007001a } },
+	{ 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } },
+	{ 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } },
+	{ 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } },
+	{ 6, 0x989c, { 0x00009688, 0x00009688, 0x00009688 } },
+	{ 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } },
+	{ 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+	{ 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+	{ 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
 };
 
 /*
  * TODO: Handle the few differences with swan during
  * bank modification and get rid of this
- * XXX: a/aTurbo ?
  */
 static const struct ath5k_ini_rfbuffer rfb_2417[] = {
-	{ 1, 0x98d4,
-	/*     mode a/XR  mode aTurbo    mode b     mode g    mode gTurbo */
-	    { 0x00000020, 0x00000020, 0x00000020, 0x00000020, 0x00000020 } },
-	{ 2, 0x98d0,
-	    { 0x02001408, 0x02001408, 0x02001408, 0x02001408, 0x02001408 } },
-	{ 3, 0x98dc,
-	    { 0x00a020c0, 0x00a020c0, 0x00e020c0, 0x00e020c0, 0x00e020c0 } },
-	{ 6, 0x989c,
-	    { 0x10000000, 0x10000000, 0x10000000, 0x10000000, 0x10000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000, 0x002a0000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00100000, 0x00100000, 0x00100000, 0x00100000, 0x00100000 } },
-	{ 6, 0x989c,
-	    { 0x00020000, 0x00020000, 0x00020000, 0x00020000, 0x00020000 } },
-	{ 6, 0x989c,
-	    { 0x00730000, 0x00730000, 0x00730000, 0x00730000, 0x00730000 } },
-	{ 6, 0x989c,
-	    { 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000, 0x00f80000 } },
-	{ 6, 0x989c,
-	    { 0x00e70000, 0x00e70000, 0x80e70000, 0x80e70000, 0x00e70000 } },
-	{ 6, 0x989c,
-	    { 0x00140000, 0x00140000, 0x00140000, 0x00140000, 0x00140000 } },
-	{ 6, 0x989c,
-	    { 0x00910040, 0x00910040, 0x00910040, 0x00910040, 0x00910040 } },
-	{ 6, 0x989c,
-	    { 0x0007001a, 0x0007001a, 0x0207001a, 0x0207001a, 0x0007001a } },
-	{ 6, 0x989c,
-	    { 0x00410000, 0x00410000, 0x00410000, 0x00410000, 0x00410000 } },
-	{ 6, 0x989c,
-	    { 0x00810000, 0x00810000, 0x00810060, 0x00810060, 0x00810060 } },
-	{ 6, 0x989c,
-	    { 0x00020800, 0x00020800, 0x00020803, 0x00020803, 0x00020803 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 } },
-	{ 6, 0x989c,
-	    { 0x00001660, 0x00001660, 0x00001660, 0x00001660, 0x00001660 } },
-	{ 6, 0x989c,
-	    { 0x00001688, 0x00001688, 0x00001688, 0x00001688, 0x00001688 } },
-	{ 6, 0x98c4,
-	    { 0x00000001, 0x00000001, 0x00000001, 0x00000001, 0x00000001 } },
-	{ 7, 0x989c,
-	    { 0x00006400, 0x00006400, 0x00006400, 0x00006400, 0x00006400 } },
-	{ 7, 0x989c,
-	    { 0x00000800, 0x00000800, 0x00000800, 0x00000800, 0x00000800 } },
-	{ 7, 0x98cc,
-	    { 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e, 0x0000000e } },
+	/* BANK / C.R.     A/XR         B           G      */
+	{ 1, 0x98d4, { 0x00000020, 0x00000020, 0x00000020 } },
+	{ 2, 0x98d0, { 0x02001408, 0x02001408, 0x02001408 } },
+	{ 3, 0x98dc, { 0x00a020c0, 0x00e020c0, 0x00e020c0 } },
+	{ 6, 0x989c, { 0x10000000, 0x10000000, 0x10000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x002a0000, 0x002a0000, 0x002a0000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00100000, 0x00100000, 0x00100000 } },
+	{ 6, 0x989c, { 0x00020000, 0x00020000, 0x00020000 } },
+	{ 6, 0x989c, { 0x00730000, 0x00730000, 0x00730000 } },
+	{ 6, 0x989c, { 0x00f80000, 0x00f80000, 0x00f80000 } },
+	{ 6, 0x989c, { 0x00e70000, 0x80e70000, 0x80e70000 } },
+	{ 6, 0x989c, { 0x00140000, 0x00140000, 0x00140000 } },
+	{ 6, 0x989c, { 0x00910040, 0x00910040, 0x00910040 } },
+	{ 6, 0x989c, { 0x0007001a, 0x0207001a, 0x0207001a } },
+	{ 6, 0x989c, { 0x00410000, 0x00410000, 0x00410000 } },
+	{ 6, 0x989c, { 0x00810000, 0x00810060, 0x00810060 } },
+	{ 6, 0x989c, { 0x00020800, 0x00020803, 0x00020803 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00000000, 0x00000000, 0x00000000 } },
+	{ 6, 0x989c, { 0x00001660, 0x00001660, 0x00001660 } },
+	{ 6, 0x989c, { 0x00001688, 0x00001688, 0x00001688 } },
+	{ 6, 0x98c4, { 0x00000001, 0x00000001, 0x00000001 } },
+	{ 7, 0x989c, { 0x00006400, 0x00006400, 0x00006400 } },
+	{ 7, 0x989c, { 0x00000800, 0x00000800, 0x00000800 } },
+	{ 7, 0x98cc, { 0x0000000e, 0x0000000e, 0x0000000e } },
 };
diff --git a/drivers/net/wireless/ath/ath5k/sysfs.c b/drivers/net/wireless/ath/ath5k/sysfs.c
index 90757de7bf5..929c68cdf8a 100644
--- a/drivers/net/wireless/ath/ath5k/sysfs.c
+++ b/drivers/net/wireless/ath/ath5k/sysfs.c
@@ -95,7 +95,7 @@ static struct attribute_group ath5k_attribute_group_ani = {
 int
 ath5k_sysfs_register(struct ath5k_softc *sc)
 {
-	struct device *dev = &sc->pdev->dev;
+	struct device *dev = sc->dev;
 	int err;
 
 	err = sysfs_create_group(&dev->kobj, &ath5k_attribute_group_ani);
@@ -110,7 +110,7 @@ ath5k_sysfs_register(struct ath5k_softc *sc)
 void
 ath5k_sysfs_unregister(struct ath5k_softc *sc)
 {
-	struct device *dev = &sc->pdev->dev;
+	struct device *dev = sc->dev;
 
 	sysfs_remove_group(&dev->kobj, &ath5k_attribute_group_ani);
 }
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 1a984b02e9e..25a6e4417cd 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -35,10 +35,9 @@ static bool ath_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 
 	pdata = (struct ath9k_platform_data *) pdev->dev.platform_data;
 	if (off >= (ARRAY_SIZE(pdata->eeprom_data))) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "%s: flash read failed, offset %08x "
-			  "is out of range\n",
-			  __func__, off);
+		ath_err(common,
+			"%s: flash read failed, offset %08x is out of range\n",
+			__func__, off);
 		return false;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 63ccb39cdcd..2e31c775351 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -135,8 +135,8 @@ static void ath9k_ani_restart(struct ath_hw *ah)
 		cck_base = AR_PHY_COUNTMAX - ah->config.cck_trig_high;
 	}
 
-	ath_print(common, ATH_DBG_ANI,
-		  "Writing ofdmbase=%u   cckbase=%u\n", ofdm_base, cck_base);
+	ath_dbg(common, ATH_DBG_ANI,
+		"Writing ofdmbase=%u   cckbase=%u\n", ofdm_base, cck_base);
 
 	ENABLE_REGWRITE_BUFFER(ah);
 
@@ -267,11 +267,11 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel)
 
 	aniState->noiseFloor = BEACON_RSSI(ah);
 
-	ath_print(common, ATH_DBG_ANI,
-		  "**** ofdmlevel %d=>%d, rssi=%d[lo=%d hi=%d]\n",
-		  aniState->ofdmNoiseImmunityLevel,
-		  immunityLevel, aniState->noiseFloor,
-		  aniState->rssiThrLow, aniState->rssiThrHigh);
+	ath_dbg(common, ATH_DBG_ANI,
+		"**** ofdmlevel %d=>%d, rssi=%d[lo=%d hi=%d]\n",
+		aniState->ofdmNoiseImmunityLevel,
+		immunityLevel, aniState->noiseFloor,
+		aniState->rssiThrLow, aniState->rssiThrHigh);
 
 	aniState->ofdmNoiseImmunityLevel = immunityLevel;
 
@@ -334,11 +334,11 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel)
 	const struct ani_cck_level_entry *entry_cck;
 
 	aniState->noiseFloor = BEACON_RSSI(ah);
-	ath_print(common, ATH_DBG_ANI,
-		  "**** ccklevel %d=>%d, rssi=%d[lo=%d hi=%d]\n",
-		  aniState->cckNoiseImmunityLevel, immunityLevel,
-		  aniState->noiseFloor, aniState->rssiThrLow,
-		  aniState->rssiThrHigh);
+	ath_dbg(common, ATH_DBG_ANI,
+		"**** ccklevel %d=>%d, rssi=%d[lo=%d hi=%d]\n",
+		aniState->cckNoiseImmunityLevel, immunityLevel,
+		aniState->noiseFloor, aniState->rssiThrLow,
+		aniState->rssiThrHigh);
 
 	if ((ah->opmode == NL80211_IFTYPE_STATION ||
 	     ah->opmode == NL80211_IFTYPE_ADHOC) &&
@@ -358,7 +358,7 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel)
 				     entry_cck->fir_step_level);
 
 	/* Skip MRC CCK for pre AR9003 families */
-	if (!AR_SREV_9300_20_OR_LATER(ah))
+	if (!AR_SREV_9300_20_OR_LATER(ah) || AR_SREV_9485(ah))
 		return;
 
 	if (aniState->mrcCCKOff == entry_cck->mrc_cck_on)
@@ -478,8 +478,8 @@ static void ath9k_ani_reset_old(struct ath_hw *ah, bool is_scanning)
 
 	if (ah->opmode != NL80211_IFTYPE_STATION
 	    && ah->opmode != NL80211_IFTYPE_ADHOC) {
-		ath_print(common, ATH_DBG_ANI,
-			  "Reset ANI state opmode %u\n", ah->opmode);
+		ath_dbg(common, ATH_DBG_ANI,
+			"Reset ANI state opmode %u\n", ah->opmode);
 		ah->stats.ast_ani_reset++;
 
 		if (ah->opmode == NL80211_IFTYPE_AP) {
@@ -584,16 +584,14 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 		    ATH9K_ANI_OFDM_DEF_LEVEL ||
 		    aniState->cckNoiseImmunityLevel !=
 		    ATH9K_ANI_CCK_DEF_LEVEL) {
-			ath_print(common, ATH_DBG_ANI,
-				  "Restore defaults: opmode %u "
-				  "chan %d Mhz/0x%x is_scanning=%d "
-				  "ofdm:%d cck:%d\n",
-				  ah->opmode,
-				  chan->channel,
-				  chan->channelFlags,
-				  is_scanning,
-				  aniState->ofdmNoiseImmunityLevel,
-				  aniState->cckNoiseImmunityLevel);
+			ath_dbg(common, ATH_DBG_ANI,
+				"Restore defaults: opmode %u chan %d Mhz/0x%x is_scanning=%d ofdm:%d cck:%d\n",
+				ah->opmode,
+				chan->channel,
+				chan->channelFlags,
+				is_scanning,
+				aniState->ofdmNoiseImmunityLevel,
+				aniState->cckNoiseImmunityLevel);
 
 			ath9k_hw_set_ofdm_nil(ah, ATH9K_ANI_OFDM_DEF_LEVEL);
 			ath9k_hw_set_cck_nil(ah, ATH9K_ANI_CCK_DEF_LEVEL);
@@ -602,16 +600,14 @@ void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning)
 		/*
 		 * restore historical levels for this channel
 		 */
-		ath_print(common, ATH_DBG_ANI,
-			  "Restore history: opmode %u "
-			  "chan %d Mhz/0x%x is_scanning=%d "
-			  "ofdm:%d cck:%d\n",
-			  ah->opmode,
-			  chan->channel,
-			  chan->channelFlags,
-			  is_scanning,
-			  aniState->ofdmNoiseImmunityLevel,
-			  aniState->cckNoiseImmunityLevel);
+		ath_dbg(common, ATH_DBG_ANI,
+			"Restore history: opmode %u chan %d Mhz/0x%x is_scanning=%d ofdm:%d cck:%d\n",
+			ah->opmode,
+			chan->channel,
+			chan->channelFlags,
+			is_scanning,
+			aniState->ofdmNoiseImmunityLevel,
+			aniState->cckNoiseImmunityLevel);
 
 			ath9k_hw_set_ofdm_nil(ah,
 					      aniState->ofdmNoiseImmunityLevel);
@@ -666,19 +662,17 @@ static bool ath9k_hw_ani_read_counters(struct ath_hw *ah)
 
 	if (!use_new_ani(ah) && (phyCnt1 < ofdm_base || phyCnt2 < cck_base)) {
 		if (phyCnt1 < ofdm_base) {
-			ath_print(common, ATH_DBG_ANI,
-				  "phyCnt1 0x%x, resetting "
-				  "counter value to 0x%x\n",
-				  phyCnt1, ofdm_base);
+			ath_dbg(common, ATH_DBG_ANI,
+				"phyCnt1 0x%x, resetting counter value to 0x%x\n",
+				phyCnt1, ofdm_base);
 			REG_WRITE(ah, AR_PHY_ERR_1, ofdm_base);
 			REG_WRITE(ah, AR_PHY_ERR_MASK_1,
 				  AR_PHY_ERR_OFDM_TIMING);
 		}
 		if (phyCnt2 < cck_base) {
-			ath_print(common, ATH_DBG_ANI,
-				  "phyCnt2 0x%x, resetting "
-				  "counter value to 0x%x\n",
-				  phyCnt2, cck_base);
+			ath_dbg(common, ATH_DBG_ANI,
+				"phyCnt2 0x%x, resetting counter value to 0x%x\n",
+				phyCnt2, cck_base);
 			REG_WRITE(ah, AR_PHY_ERR_2, cck_base);
 			REG_WRITE(ah, AR_PHY_ERR_MASK_2,
 				  AR_PHY_ERR_CCK_TIMING);
@@ -719,13 +713,12 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan)
 	cckPhyErrRate =  aniState->cckPhyErrCount * 1000 /
 			 aniState->listenTime;
 
-	ath_print(common, ATH_DBG_ANI,
-		  "listenTime=%d OFDM:%d errs=%d/s CCK:%d "
-		  "errs=%d/s ofdm_turn=%d\n",
-		  aniState->listenTime,
-		  aniState->ofdmNoiseImmunityLevel,
-		  ofdmPhyErrRate, aniState->cckNoiseImmunityLevel,
-		  cckPhyErrRate, aniState->ofdmsTurn);
+	ath_dbg(common, ATH_DBG_ANI,
+		"listenTime=%d OFDM:%d errs=%d/s CCK:%d errs=%d/s ofdm_turn=%d\n",
+		aniState->listenTime,
+		aniState->ofdmNoiseImmunityLevel,
+		ofdmPhyErrRate, aniState->cckNoiseImmunityLevel,
+		cckPhyErrRate, aniState->ofdmsTurn);
 
 	if (aniState->listenTime > 5 * ah->aniperiod) {
 		if (ofdmPhyErrRate <= ah->config.ofdm_trig_low &&
@@ -755,7 +748,7 @@ void ath9k_enable_mib_counters(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 
-	ath_print(common, ATH_DBG_ANI, "Enable MIB counters\n");
+	ath_dbg(common, ATH_DBG_ANI, "Enable MIB counters\n");
 
 	ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
 
@@ -777,7 +770,7 @@ void ath9k_hw_disable_mib_counters(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 
-	ath_print(common, ATH_DBG_ANI, "Disable MIB counters\n");
+	ath_dbg(common, ATH_DBG_ANI, "Disable MIB counters\n");
 
 	REG_WRITE(ah, AR_MIBC, AR_MIBC_FMC);
 	ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
@@ -834,10 +827,10 @@ void ath9k_hw_ani_setup(struct ath_hw *ah)
 {
 	int i;
 
-	const int totalSizeDesired[] = { -55, -55, -55, -55, -62 };
-	const int coarseHigh[] = { -14, -14, -14, -14, -12 };
-	const int coarseLow[] = { -64, -64, -64, -64, -70 };
-	const int firpwr[] = { -78, -78, -78, -78, -80 };
+	static const int totalSizeDesired[] = { -55, -55, -55, -55, -62 };
+	static const int coarseHigh[] = { -14, -14, -14, -14, -12 };
+	static const int coarseLow[] = { -64, -64, -64, -64, -70 };
+	static const int firpwr[] = { -78, -78, -78, -78, -80 };
 
 	for (i = 0; i < 5; i++) {
 		ah->totalSizeDesired[i] = totalSizeDesired[i];
@@ -852,7 +845,7 @@ void ath9k_hw_ani_init(struct ath_hw *ah)
 	struct ath_common *common = ath9k_hw_common(ah);
 	int i;
 
-	ath_print(common, ATH_DBG_ANI, "Initialize ANI\n");
+	ath_dbg(common, ATH_DBG_ANI, "Initialize ANI\n");
 
 	if (use_new_ani(ah)) {
 		ah->config.ofdm_trig_high = ATH9K_ANI_OFDM_TRIG_HIGH_NEW;
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index ea9f4497f58..ffcf44a4058 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -130,9 +130,8 @@ static void ar5008_hw_force_bias(struct ath_hw *ah, u16 synth_freq)
 	/* pre-reverse this field */
 	tmp_reg = ath9k_hw_reverse_bits(new_bias, 3);
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "Force rf_pwd_icsyndiv to %1d on %4d\n",
-		  new_bias, synth_freq);
+	ath_dbg(common, ATH_DBG_CONFIG, "Force rf_pwd_icsyndiv to %1d on %4d\n",
+		new_bias, synth_freq);
 
 	/* swizzle rf_pwd_icsyndiv */
 	ar5008_hw_phy_modify_rx_buffer(ah->analogBank6Data, tmp_reg, 3, 181, 3);
@@ -173,8 +172,7 @@ static int ar5008_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 			channelSel = ((freq - 704) * 2 - 3040) / 10;
 			bModeSynth = 1;
 		} else {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Invalid channel %u MHz\n", freq);
+			ath_err(common, "Invalid channel %u MHz\n", freq);
 			return -EINVAL;
 		}
 
@@ -206,8 +204,7 @@ static int ar5008_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 		channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8);
 		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
 	} else {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Invalid channel %u MHz\n", freq);
+		ath_err(common, "Invalid channel %u MHz\n", freq);
 		return -EINVAL;
 	}
 
@@ -244,13 +241,15 @@ static void ar5008_hw_spur_mitigate(struct ath_hw *ah,
 	int upper, lower, cur_vit_mask;
 	int tmp, new;
 	int i;
-	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
-			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
+	static int pilot_mask_reg[4] = {
+		AR_PHY_TIMING7, AR_PHY_TIMING8,
+		AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
 	};
-	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
-			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
+	static int chan_mask_reg[4] = {
+		AR_PHY_TIMING9, AR_PHY_TIMING10,
+		AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
 	};
-	int inc[4] = { 0, 100, 0, 0 };
+	static int inc[4] = { 0, 100, 0, 0 };
 
 	int8_t mask_m[123];
 	int8_t mask_p[123];
@@ -446,8 +445,7 @@ static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah)
 #define ATH_ALLOC_BANK(bank, size) do { \
 		bank = kzalloc((sizeof(u32) * size), GFP_KERNEL); \
 		if (!bank) { \
-			ath_print(common, ATH_DBG_FATAL, \
-				  "Cannot allocate RF banks\n"); \
+			ath_err(common, "Cannot allocate RF banks\n"); \
 			return -ENOMEM; \
 		} \
 	} while (0);
@@ -873,12 +871,11 @@ static int ar5008_hw_process_ini(struct ath_hw *ah,
 				 channel->max_antenna_gain * 2,
 				 channel->max_power * 2,
 				 min((u32) MAX_RATE_POWER,
-				 (u32) regulatory->power_limit));
+				 (u32) regulatory->power_limit), false);
 
 	/* Write analog registers */
 	if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-			  "ar5416SetRfRegs failed\n");
+		ath_err(ath9k_hw_common(ah), "ar5416SetRfRegs failed\n");
 		return -EIO;
 	}
 
@@ -964,18 +961,6 @@ static void ar5008_hw_rfbus_done(struct ath_hw *ah)
 	REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
 }
 
-static void ar5008_hw_enable_rfkill(struct ath_hw *ah)
-{
-	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-		    AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
-
-	REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
-		    AR_GPIO_INPUT_MUX2_RFSILENT);
-
-	ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
-	REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
-}
-
 static void ar5008_restore_chainmask(struct ath_hw *ah)
 {
 	int rx_chainmask = ah->rxchainmask;
@@ -1056,10 +1041,9 @@ static bool ar5008_hw_ani_control_old(struct ath_hw *ah,
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(ah->totalSizeDesired)) {
-			ath_print(common, ATH_DBG_ANI,
-				  "level out of range (%u > %u)\n",
-				  level,
-				  (unsigned)ARRAY_SIZE(ah->totalSizeDesired));
+			ath_dbg(common, ATH_DBG_ANI,
+				"level out of range (%u > %zu)\n",
+				level, ARRAY_SIZE(ah->totalSizeDesired));
 			return false;
 		}
 
@@ -1084,12 +1068,12 @@ static bool ar5008_hw_ani_control_old(struct ath_hw *ah,
 		break;
 	}
 	case ATH9K_ANI_OFDM_WEAK_SIGNAL_DETECTION:{
-		const int m1ThreshLow[] = { 127, 50 };
-		const int m2ThreshLow[] = { 127, 40 };
-		const int m1Thresh[] = { 127, 0x4d };
-		const int m2Thresh[] = { 127, 0x40 };
-		const int m2CountThr[] = { 31, 16 };
-		const int m2CountThrLow[] = { 63, 48 };
+		static const int m1ThreshLow[] = { 127, 50 };
+		static const int m2ThreshLow[] = { 127, 40 };
+		static const int m1Thresh[] = { 127, 0x4d };
+		static const int m2Thresh[] = { 127, 0x40 };
+		static const int m2CountThr[] = { 31, 16 };
+		static const int m2CountThrLow[] = { 63, 48 };
 		u32 on = param ? 1 : 0;
 
 		REG_RMW_FIELD(ah, AR_PHY_SFCORR_LOW,
@@ -1141,7 +1125,7 @@ static bool ar5008_hw_ani_control_old(struct ath_hw *ah,
 		break;
 	}
 	case ATH9K_ANI_CCK_WEAK_SIGNAL_THR:{
-		const int weakSigThrCck[] = { 8, 6 };
+		static const int weakSigThrCck[] = { 8, 6 };
 		u32 high = param ? 1 : 0;
 
 		REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT,
@@ -1157,14 +1141,13 @@ static bool ar5008_hw_ani_control_old(struct ath_hw *ah,
 		break;
 	}
 	case ATH9K_ANI_FIRSTEP_LEVEL:{
-		const int firstep[] = { 0, 4, 8 };
+		static const int firstep[] = { 0, 4, 8 };
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(firstep)) {
-			ath_print(common, ATH_DBG_ANI,
-				  "level out of range (%u > %u)\n",
-				  level,
-				  (unsigned) ARRAY_SIZE(firstep));
+			ath_dbg(common, ATH_DBG_ANI,
+				"level out of range (%u > %zu)\n",
+				level, ARRAY_SIZE(firstep));
 			return false;
 		}
 		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
@@ -1178,14 +1161,13 @@ static bool ar5008_hw_ani_control_old(struct ath_hw *ah,
 		break;
 	}
 	case ATH9K_ANI_SPUR_IMMUNITY_LEVEL:{
-		const int cycpwrThr1[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
+		static const int cycpwrThr1[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(cycpwrThr1)) {
-			ath_print(common, ATH_DBG_ANI,
-				  "level out of range (%u > %u)\n",
-				  level,
-				  (unsigned) ARRAY_SIZE(cycpwrThr1));
+			ath_dbg(common, ATH_DBG_ANI,
+				"level out of range (%u > %zu)\n",
+				level, ARRAY_SIZE(cycpwrThr1));
 			return false;
 		}
 		REG_RMW_FIELD(ah, AR_PHY_TIMING5,
@@ -1201,25 +1183,22 @@ static bool ar5008_hw_ani_control_old(struct ath_hw *ah,
 	case ATH9K_ANI_PRESENT:
 		break;
 	default:
-		ath_print(common, ATH_DBG_ANI,
-			  "invalid cmd %u\n", cmd);
+		ath_dbg(common, ATH_DBG_ANI, "invalid cmd %u\n", cmd);
 		return false;
 	}
 
-	ath_print(common, ATH_DBG_ANI, "ANI parameters:\n");
-	ath_print(common, ATH_DBG_ANI,
-		  "noiseImmunityLevel=%d, spurImmunityLevel=%d, "
-		  "ofdmWeakSigDetectOff=%d\n",
-		  aniState->noiseImmunityLevel,
-		  aniState->spurImmunityLevel,
-		  !aniState->ofdmWeakSigDetectOff);
-	ath_print(common, ATH_DBG_ANI,
-		  "cckWeakSigThreshold=%d, "
-		  "firstepLevel=%d, listenTime=%d\n",
-		  aniState->cckWeakSigThreshold,
-		  aniState->firstepLevel,
-		  aniState->listenTime);
-	ath_print(common, ATH_DBG_ANI,
+	ath_dbg(common, ATH_DBG_ANI, "ANI parameters:\n");
+	ath_dbg(common, ATH_DBG_ANI,
+		"noiseImmunityLevel=%d, spurImmunityLevel=%d, ofdmWeakSigDetectOff=%d\n",
+		aniState->noiseImmunityLevel,
+		aniState->spurImmunityLevel,
+		!aniState->ofdmWeakSigDetectOff);
+	ath_dbg(common, ATH_DBG_ANI,
+		"cckWeakSigThreshold=%d, firstepLevel=%d, listenTime=%d\n",
+		aniState->cckWeakSigThreshold,
+		aniState->firstepLevel,
+		aniState->listenTime);
+	ath_dbg(common, ATH_DBG_ANI,
 		"ofdmPhyErrCount=%d, cckPhyErrCount=%d\n\n",
 		aniState->ofdmPhyErrCount,
 		aniState->cckPhyErrCount);
@@ -1304,12 +1283,12 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
 
 		if (!on != aniState->ofdmWeakSigDetectOff) {
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: ofdm weak signal: %s=>%s\n",
-				  chan->channel,
-				  !aniState->ofdmWeakSigDetectOff ?
-					"on" : "off",
-				  on ? "on" : "off");
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: ofdm weak signal: %s=>%s\n",
+				chan->channel,
+				!aniState->ofdmWeakSigDetectOff ?
+				"on" : "off",
+				on ? "on" : "off");
 			if (on)
 				ah->stats.ast_ani_ofdmon++;
 			else
@@ -1322,11 +1301,9 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(firstep_table)) {
-			ath_print(common, ATH_DBG_ANI,
-				  "ATH9K_ANI_FIRSTEP_LEVEL: level "
-				  "out of range (%u > %u)\n",
-				  level,
-				  (unsigned) ARRAY_SIZE(firstep_table));
+			ath_dbg(common, ATH_DBG_ANI,
+				"ATH9K_ANI_FIRSTEP_LEVEL: level out of range (%u > %zu)\n",
+				level, ARRAY_SIZE(firstep_table));
 			return false;
 		}
 
@@ -1361,24 +1338,22 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 			      AR_PHY_FIND_SIG_FIRSTEP_LOW, value2);
 
 		if (level != aniState->firstepLevel) {
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: level %d=>%d[def:%d] "
-				  "firstep[level]=%d ini=%d\n",
-				  chan->channel,
-				  aniState->firstepLevel,
-				  level,
-				  ATH9K_ANI_FIRSTEP_LVL_NEW,
-				  value,
-				  aniState->iniDef.firstep);
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: level %d=>%d[def:%d] "
-				  "firstep_low[level]=%d ini=%d\n",
-				  chan->channel,
-				  aniState->firstepLevel,
-				  level,
-				  ATH9K_ANI_FIRSTEP_LVL_NEW,
-				  value2,
-				  aniState->iniDef.firstepLow);
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: level %d=>%d[def:%d] firstep[level]=%d ini=%d\n",
+				chan->channel,
+				aniState->firstepLevel,
+				level,
+				ATH9K_ANI_FIRSTEP_LVL_NEW,
+				value,
+				aniState->iniDef.firstep);
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: level %d=>%d[def:%d] firstep_low[level]=%d ini=%d\n",
+				chan->channel,
+				aniState->firstepLevel,
+				level,
+				ATH9K_ANI_FIRSTEP_LVL_NEW,
+				value2,
+				aniState->iniDef.firstepLow);
 			if (level > aniState->firstepLevel)
 				ah->stats.ast_ani_stepup++;
 			else if (level < aniState->firstepLevel)
@@ -1391,11 +1366,9 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(cycpwrThr1_table)) {
-			ath_print(common, ATH_DBG_ANI,
-				  "ATH9K_ANI_SPUR_IMMUNITY_LEVEL: level "
-				  "out of range (%u > %u)\n",
-				  level,
-				  (unsigned) ARRAY_SIZE(cycpwrThr1_table));
+			ath_dbg(common, ATH_DBG_ANI,
+				"ATH9K_ANI_SPUR_IMMUNITY_LEVEL: level out of range (%u > %zu)\n",
+				level, ARRAY_SIZE(cycpwrThr1_table));
 			return false;
 		}
 		/*
@@ -1429,24 +1402,22 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 			      AR_PHY_EXT_TIMING5_CYCPWR_THR1, value2);
 
 		if (level != aniState->spurImmunityLevel) {
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: level %d=>%d[def:%d] "
-				  "cycpwrThr1[level]=%d ini=%d\n",
-				  chan->channel,
-				  aniState->spurImmunityLevel,
-				  level,
-				  ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
-				  value,
-				  aniState->iniDef.cycpwrThr1);
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: level %d=>%d[def:%d] "
-				  "cycpwrThr1Ext[level]=%d ini=%d\n",
-				  chan->channel,
-				  aniState->spurImmunityLevel,
-				  level,
-				  ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
-				  value2,
-				  aniState->iniDef.cycpwrThr1Ext);
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: level %d=>%d[def:%d] cycpwrThr1[level]=%d ini=%d\n",
+				chan->channel,
+				aniState->spurImmunityLevel,
+				level,
+				ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
+				value,
+				aniState->iniDef.cycpwrThr1);
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: level %d=>%d[def:%d] cycpwrThr1Ext[level]=%d ini=%d\n",
+				chan->channel,
+				aniState->spurImmunityLevel,
+				level,
+				ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
+				value2,
+				aniState->iniDef.cycpwrThr1Ext);
 			if (level > aniState->spurImmunityLevel)
 				ah->stats.ast_ani_spurup++;
 			else if (level < aniState->spurImmunityLevel)
@@ -1465,22 +1436,19 @@ static bool ar5008_hw_ani_control_new(struct ath_hw *ah,
 	case ATH9K_ANI_PRESENT:
 		break;
 	default:
-		ath_print(common, ATH_DBG_ANI,
-			  "invalid cmd %u\n", cmd);
+		ath_dbg(common, ATH_DBG_ANI, "invalid cmd %u\n", cmd);
 		return false;
 	}
 
-	ath_print(common, ATH_DBG_ANI,
-		  "ANI parameters: SI=%d, ofdmWS=%s FS=%d "
-		  "MRCcck=%s listenTime=%d "
-		  "ofdmErrs=%d cckErrs=%d\n",
-		  aniState->spurImmunityLevel,
-		  !aniState->ofdmWeakSigDetectOff ? "on" : "off",
-		  aniState->firstepLevel,
-		  !aniState->mrcCCKOff ? "on" : "off",
-		  aniState->listenTime,
-		  aniState->ofdmPhyErrCount,
-		  aniState->cckPhyErrCount);
+	ath_dbg(common, ATH_DBG_ANI,
+		"ANI parameters: SI=%d, ofdmWS=%s FS=%d MRCcck=%s listenTime=%d ofdmErrs=%d cckErrs=%d\n",
+		aniState->spurImmunityLevel,
+		!aniState->ofdmWeakSigDetectOff ? "on" : "off",
+		aniState->firstepLevel,
+		!aniState->mrcCCKOff ? "on" : "off",
+		aniState->listenTime,
+		aniState->ofdmPhyErrCount,
+		aniState->cckPhyErrCount);
 	return true;
 }
 
@@ -1490,25 +1458,25 @@ static void ar5008_hw_do_getnf(struct ath_hw *ah,
 	int16_t nf;
 
 	nf = MS(REG_READ(ah, AR_PHY_CCA), AR_PHY_MINCCA_PWR);
-	nfarray[0] = sign_extend(nf, 9);
+	nfarray[0] = sign_extend32(nf, 8);
 
 	nf = MS(REG_READ(ah, AR_PHY_CH1_CCA), AR_PHY_CH1_MINCCA_PWR);
-	nfarray[1] = sign_extend(nf, 9);
+	nfarray[1] = sign_extend32(nf, 8);
 
 	nf = MS(REG_READ(ah, AR_PHY_CH2_CCA), AR_PHY_CH2_MINCCA_PWR);
-	nfarray[2] = sign_extend(nf, 9);
+	nfarray[2] = sign_extend32(nf, 8);
 
 	if (!IS_CHAN_HT40(ah->curchan))
 		return;
 
 	nf = MS(REG_READ(ah, AR_PHY_EXT_CCA), AR_PHY_EXT_MINCCA_PWR);
-	nfarray[3] = sign_extend(nf, 9);
+	nfarray[3] = sign_extend32(nf, 8);
 
 	nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA), AR_PHY_CH1_EXT_MINCCA_PWR);
-	nfarray[4] = sign_extend(nf, 9);
+	nfarray[4] = sign_extend32(nf, 8);
 
 	nf = MS(REG_READ(ah, AR_PHY_CH2_EXT_CCA), AR_PHY_CH2_EXT_MINCCA_PWR);
-	nfarray[5] = sign_extend(nf, 9);
+	nfarray[5] = sign_extend32(nf, 8);
 }
 
 /*
@@ -1526,13 +1494,12 @@ static void ar5008_hw_ani_cache_ini_regs(struct ath_hw *ah)
 
 	iniDef = &aniState->iniDef;
 
-	ath_print(common, ATH_DBG_ANI,
-		  "ver %d.%d opmode %u chan %d Mhz/0x%x\n",
-		  ah->hw_version.macVersion,
-		  ah->hw_version.macRev,
-		  ah->opmode,
-		  chan->channel,
-		  chan->channelFlags);
+	ath_dbg(common, ATH_DBG_ANI, "ver %d.%d opmode %u chan %d Mhz/0x%x\n",
+		ah->hw_version.macVersion,
+		ah->hw_version.macRev,
+		ah->opmode,
+		chan->channel,
+		chan->channelFlags);
 
 	val = REG_READ(ah, AR_PHY_SFCORR);
 	iniDef->m1Thresh = MS(val, AR_PHY_SFCORR_M1_THRESH);
@@ -1579,10 +1546,55 @@ static void ar5008_hw_set_nf_limits(struct ath_hw *ah)
 	ah->nf_5g.nominal = AR_PHY_CCA_NOM_VAL_5416_5GHZ;
 }
 
+static void ar5008_hw_set_radar_params(struct ath_hw *ah,
+				       struct ath_hw_radar_conf *conf)
+{
+	u32 radar_0 = 0, radar_1 = 0;
+
+	if (!conf) {
+		REG_CLR_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_ENA);
+		return;
+	}
+
+	radar_0 |= AR_PHY_RADAR_0_ENA | AR_PHY_RADAR_0_FFT_ENA;
+	radar_0 |= SM(conf->fir_power, AR_PHY_RADAR_0_FIRPWR);
+	radar_0 |= SM(conf->radar_rssi, AR_PHY_RADAR_0_RRSSI);
+	radar_0 |= SM(conf->pulse_height, AR_PHY_RADAR_0_HEIGHT);
+	radar_0 |= SM(conf->pulse_rssi, AR_PHY_RADAR_0_PRSSI);
+	radar_0 |= SM(conf->pulse_inband, AR_PHY_RADAR_0_INBAND);
+
+	radar_1 |= AR_PHY_RADAR_1_MAX_RRSSI;
+	radar_1 |= AR_PHY_RADAR_1_BLOCK_CHECK;
+	radar_1 |= SM(conf->pulse_maxlen, AR_PHY_RADAR_1_MAXLEN);
+	radar_1 |= SM(conf->pulse_inband_step, AR_PHY_RADAR_1_RELSTEP_THRESH);
+	radar_1 |= SM(conf->radar_inband, AR_PHY_RADAR_1_RELPWR_THRESH);
+
+	REG_WRITE(ah, AR_PHY_RADAR_0, radar_0);
+	REG_WRITE(ah, AR_PHY_RADAR_1, radar_1);
+	if (conf->ext_channel)
+		REG_SET_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA);
+	else
+		REG_CLR_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA);
+}
+
+static void ar5008_hw_set_radar_conf(struct ath_hw *ah)
+{
+	struct ath_hw_radar_conf *conf = &ah->radar_conf;
+
+	conf->fir_power = -33;
+	conf->radar_rssi = 20;
+	conf->pulse_height = 10;
+	conf->pulse_rssi = 24;
+	conf->pulse_inband = 15;
+	conf->pulse_maxlen = 255;
+	conf->pulse_inband_step = 12;
+	conf->radar_inband = 8;
+}
+
 void ar5008_hw_attach_phy_ops(struct ath_hw *ah)
 {
 	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
-	const u32 ar5416_cca_regs[6] = {
+	static const u32 ar5416_cca_regs[6] = {
 		AR_PHY_CCA,
 		AR_PHY_CH1_CCA,
 		AR_PHY_CH2_CCA,
@@ -1605,10 +1617,10 @@ void ar5008_hw_attach_phy_ops(struct ath_hw *ah)
 	priv_ops->set_delta_slope = ar5008_hw_set_delta_slope;
 	priv_ops->rfbus_req = ar5008_hw_rfbus_req;
 	priv_ops->rfbus_done = ar5008_hw_rfbus_done;
-	priv_ops->enable_rfkill = ar5008_hw_enable_rfkill;
 	priv_ops->restore_chainmask = ar5008_restore_chainmask;
 	priv_ops->set_diversity = ar5008_set_diversity;
 	priv_ops->do_getnf = ar5008_hw_do_getnf;
+	priv_ops->set_radar_params = ar5008_hw_set_radar_params;
 
 	if (modparam_force_new_ani) {
 		priv_ops->ani_control = ar5008_hw_ani_control_new;
@@ -1624,5 +1636,6 @@ void ar5008_hw_attach_phy_ops(struct ath_hw *ah)
 		priv_ops->compute_pll_control = ar5008_hw_compute_pll_control;
 
 	ar5008_hw_set_nf_limits(ah);
+	ar5008_hw_set_radar_conf(ah);
 	memcpy(ah->nf_regs, ar5416_cca_regs, sizeof(ah->nf_regs));
 }
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 15f62cd0cc3..01880aa13e3 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -39,18 +39,18 @@ static void ar9002_hw_setup_calibration(struct ath_hw *ah,
 	switch (currCal->calData->calType) {
 	case IQ_MISMATCH_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "starting IQ Mismatch Calibration\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"starting IQ Mismatch Calibration\n");
 		break;
 	case ADC_GAIN_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_GAIN);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "starting ADC Gain Calibration\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"starting ADC Gain Calibration\n");
 		break;
 	case ADC_DC_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_PER);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "starting ADC DC Calibration\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"starting ADC DC Calibration\n");
 		break;
 	}
 
@@ -107,11 +107,11 @@ static void ar9002_hw_iqcal_collect(struct ath_hw *ah)
 			REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
 		ah->totalIqCorrMeas[i] +=
 			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
-		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
-			  "%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
-			  ah->cal_samples, i, ah->totalPowerMeasI[i],
-			  ah->totalPowerMeasQ[i],
-			  ah->totalIqCorrMeas[i]);
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			"%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
+			ah->cal_samples, i, ah->totalPowerMeasI[i],
+			ah->totalPowerMeasQ[i],
+			ah->totalIqCorrMeas[i]);
 	}
 }
 
@@ -129,14 +129,13 @@ static void ar9002_hw_adc_gaincal_collect(struct ath_hw *ah)
 		ah->totalAdcQEvenPhase[i] +=
 			REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
 
-		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
-			  "%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
-			  "oddq=0x%08x; evenq=0x%08x;\n",
-			  ah->cal_samples, i,
-			  ah->totalAdcIOddPhase[i],
-			  ah->totalAdcIEvenPhase[i],
-			  ah->totalAdcQOddPhase[i],
-			  ah->totalAdcQEvenPhase[i]);
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			"%d: Chn %d oddi=0x%08x; eveni=0x%08x; oddq=0x%08x; evenq=0x%08x;\n",
+			ah->cal_samples, i,
+			ah->totalAdcIOddPhase[i],
+			ah->totalAdcIEvenPhase[i],
+			ah->totalAdcQOddPhase[i],
+			ah->totalAdcQEvenPhase[i]);
 	}
 }
 
@@ -154,14 +153,13 @@ static void ar9002_hw_adc_dccal_collect(struct ath_hw *ah)
 		ah->totalAdcDcOffsetQEvenPhase[i] +=
 			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
 
-		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
-			  "%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
-			  "oddq=0x%08x; evenq=0x%08x;\n",
-			  ah->cal_samples, i,
-			  ah->totalAdcDcOffsetIOddPhase[i],
-			  ah->totalAdcDcOffsetIEvenPhase[i],
-			  ah->totalAdcDcOffsetQOddPhase[i],
-			  ah->totalAdcDcOffsetQEvenPhase[i]);
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			"%d: Chn %d oddi=0x%08x; eveni=0x%08x; oddq=0x%08x; evenq=0x%08x;\n",
+			ah->cal_samples, i,
+			ah->totalAdcDcOffsetIOddPhase[i],
+			ah->totalAdcDcOffsetIEvenPhase[i],
+			ah->totalAdcDcOffsetQOddPhase[i],
+			ah->totalAdcDcOffsetQEvenPhase[i]);
 	}
 }
 
@@ -178,13 +176,13 @@ static void ar9002_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 		powerMeasQ = ah->totalPowerMeasQ[i];
 		iqCorrMeas = ah->totalIqCorrMeas[i];
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Starting IQ Cal and Correction for Chain %d\n",
-			  i);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Starting IQ Cal and Correction for Chain %d\n",
+			i);
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Orignal: Chn %diq_corr_meas = 0x%08x\n",
-			  i, ah->totalIqCorrMeas[i]);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Orignal: Chn %diq_corr_meas = 0x%08x\n",
+			i, ah->totalIqCorrMeas[i]);
 
 		iqCorrNeg = 0;
 
@@ -193,12 +191,12 @@ static void ar9002_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 			iqCorrNeg = 1;
 		}
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
-		ath_print(common, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
-			  iqCorrNeg);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
+		ath_dbg(common, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
+			iqCorrNeg);
 
 		iCoffDenom = (powerMeasI / 2 + powerMeasQ / 2) / 128;
 		qCoffDenom = powerMeasQ / 64;
@@ -207,14 +205,14 @@ static void ar9002_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 		    (qCoffDenom != 0)) {
 			iCoff = iqCorrMeas / iCoffDenom;
 			qCoff = powerMeasI / qCoffDenom - 64;
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Chn %d iCoff = 0x%08x\n", i, iCoff);
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Chn %d qCoff = 0x%08x\n", i, qCoff);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Chn %d iCoff = 0x%08x\n", i, iCoff);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Chn %d qCoff = 0x%08x\n", i, qCoff);
 
 			iCoff = iCoff & 0x3f;
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "New: Chn %d iCoff = 0x%08x\n", i, iCoff);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"New: Chn %d iCoff = 0x%08x\n", i, iCoff);
 			if (iqCorrNeg == 0x0)
 				iCoff = 0x40 - iCoff;
 
@@ -223,9 +221,9 @@ static void ar9002_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 			else if (qCoff <= -16)
 				qCoff = -16;
 
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Chn %d : iCoff = 0x%x  qCoff = 0x%x\n",
-				  i, iCoff, qCoff);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Chn %d : iCoff = 0x%x  qCoff = 0x%x\n",
+				i, iCoff, qCoff);
 
 			REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
 				      AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF,
@@ -233,9 +231,9 @@ static void ar9002_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 			REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
 				      AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF,
 				      qCoff);
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "IQ Cal and Correction done for Chain %d\n",
-				  i);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"IQ Cal and Correction done for Chain %d\n",
+				i);
 		}
 	}
 
@@ -255,21 +253,21 @@ static void ar9002_hw_adc_gaincal_calibrate(struct ath_hw *ah, u8 numChains)
 		qOddMeasOffset = ah->totalAdcQOddPhase[i];
 		qEvenMeasOffset = ah->totalAdcQEvenPhase[i];
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Starting ADC Gain Cal for Chain %d\n", i);
-
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_odd_i = 0x%08x\n", i,
-			  iOddMeasOffset);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_even_i = 0x%08x\n", i,
-			  iEvenMeasOffset);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_odd_q = 0x%08x\n", i,
-			  qOddMeasOffset);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_even_q = 0x%08x\n", i,
-			  qEvenMeasOffset);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Starting ADC Gain Cal for Chain %d\n", i);
+
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_odd_i = 0x%08x\n", i,
+			iOddMeasOffset);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_even_i = 0x%08x\n", i,
+			iEvenMeasOffset);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_odd_q = 0x%08x\n", i,
+			qOddMeasOffset);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_even_q = 0x%08x\n", i,
+			qEvenMeasOffset);
 
 		if (iOddMeasOffset != 0 && qEvenMeasOffset != 0) {
 			iGainMismatch =
@@ -279,20 +277,20 @@ static void ar9002_hw_adc_gaincal_calibrate(struct ath_hw *ah, u8 numChains)
 				((qOddMeasOffset * 32) /
 				 qEvenMeasOffset) & 0x3f;
 
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Chn %d gain_mismatch_i = 0x%08x\n", i,
-				  iGainMismatch);
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Chn %d gain_mismatch_q = 0x%08x\n", i,
-				  qGainMismatch);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Chn %d gain_mismatch_i = 0x%08x\n", i,
+				iGainMismatch);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Chn %d gain_mismatch_q = 0x%08x\n", i,
+				qGainMismatch);
 
 			val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
 			val &= 0xfffff000;
 			val |= (qGainMismatch) | (iGainMismatch << 6);
 			REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
 
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "ADC Gain Cal done for Chain %d\n", i);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"ADC Gain Cal done for Chain %d\n", i);
 		}
 	}
 
@@ -317,41 +315,41 @@ static void ar9002_hw_adc_dccal_calibrate(struct ath_hw *ah, u8 numChains)
 		qOddMeasOffset = ah->totalAdcDcOffsetQOddPhase[i];
 		qEvenMeasOffset = ah->totalAdcDcOffsetQEvenPhase[i];
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			   "Starting ADC DC Offset Cal for Chain %d\n", i);
-
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_odd_i = %d\n", i,
-			  iOddMeasOffset);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_even_i = %d\n", i,
-			  iEvenMeasOffset);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_odd_q = %d\n", i,
-			  qOddMeasOffset);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_even_q = %d\n", i,
-			  qEvenMeasOffset);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Starting ADC DC Offset Cal for Chain %d\n", i);
+
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_odd_i = %d\n", i,
+			iOddMeasOffset);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_even_i = %d\n", i,
+			iEvenMeasOffset);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_odd_q = %d\n", i,
+			qOddMeasOffset);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_even_q = %d\n", i,
+			qEvenMeasOffset);
 
 		iDcMismatch = (((iEvenMeasOffset - iOddMeasOffset) * 2) /
 			       numSamples) & 0x1ff;
 		qDcMismatch = (((qOddMeasOffset - qEvenMeasOffset) * 2) /
 			       numSamples) & 0x1ff;
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d dc_offset_mismatch_i = 0x%08x\n", i,
-			  iDcMismatch);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d dc_offset_mismatch_q = 0x%08x\n", i,
-			  qDcMismatch);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d dc_offset_mismatch_i = 0x%08x\n", i,
+			iDcMismatch);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d dc_offset_mismatch_q = 0x%08x\n", i,
+			qDcMismatch);
 
 		val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
 		val &= 0xc0000fff;
 		val |= (qDcMismatch << 12) | (iDcMismatch << 21);
 		REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "ADC DC Offset Cal done for Chain %d\n", i);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"ADC DC Offset Cal done for Chain %d\n", i);
 	}
 
 	REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0),
@@ -540,7 +538,7 @@ static inline void ar9285_hw_pa_cal(struct ath_hw *ah, bool is_reset)
 		{ 0x7838, 0 },
 	};
 
-	ath_print(common, ATH_DBG_CALIBRATE, "Running PA Calibration\n");
+	ath_dbg(common, ATH_DBG_CALIBRATE, "Running PA Calibration\n");
 
 	/* PA CAL is not needed for high power solution */
 	if (ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE) ==
@@ -721,9 +719,8 @@ static bool ar9285_hw_cl_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL);
 		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
 				  AR_PHY_AGC_CONTROL_CAL, 0, AH_WAIT_TIMEOUT)) {
-			ath_print(common, ATH_DBG_CALIBRATE, "offset "
-				  "calibration failed to complete in "
-				  "1ms; noisy ??\n");
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"offset calibration failed to complete in 1ms; noisy environment?\n");
 			return false;
 		}
 		REG_CLR_BIT(ah, AR_PHY_TURBO, AR_PHY_FC_DYN2040_EN);
@@ -736,8 +733,8 @@ static bool ar9285_hw_cl_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL);
 	if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
 			  0, AH_WAIT_TIMEOUT)) {
-		ath_print(common, ATH_DBG_CALIBRATE, "offset calibration "
-			  "failed to complete in 1ms; noisy ??\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"offset calibration failed to complete in 1ms; noisy environment?\n");
 		return false;
 	}
 
@@ -829,9 +826,8 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
 				   AR_PHY_AGC_CONTROL_CAL,
 				   0, AH_WAIT_TIMEOUT)) {
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "offset calibration failed to "
-				  "complete in 1ms; noisy environment?\n");
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"offset calibration failed to complete in 1ms; noisy environment?\n");
 			return false;
 		}
 
@@ -866,19 +862,19 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 
 			INIT_CAL(&ah->adcgain_caldata);
 			INSERT_CAL(ah, &ah->adcgain_caldata);
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "enabling ADC Gain Calibration.\n");
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"enabling ADC Gain Calibration.\n");
 
 			INIT_CAL(&ah->adcdc_caldata);
 			INSERT_CAL(ah, &ah->adcdc_caldata);
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "enabling ADC DC Calibration.\n");
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"enabling ADC DC Calibration.\n");
 		}
 
 		INIT_CAL(&ah->iq_caldata);
 		INSERT_CAL(ah, &ah->iq_caldata);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "enabling IQ Calibration.\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"enabling IQ Calibration.\n");
 
 		ah->cal_list_curr = ah->cal_list;
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
index a0471f2e1c7..f8a7771faee 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c
@@ -22,28 +22,10 @@
 
 int modparam_force_new_ani;
 module_param_named(force_new_ani, modparam_force_new_ani, int, 0444);
-MODULE_PARM_DESC(nohwcrypt, "Force new ANI for AR5008, AR9001, AR9002");
+MODULE_PARM_DESC(force_new_ani, "Force new ANI for AR5008, AR9001, AR9002");
 
 /* General hardware code for the A5008/AR9001/AR9002 hadware families */
 
-static bool ar9002_hw_macversion_supported(u32 macversion)
-{
-	switch (macversion) {
-	case AR_SREV_VERSION_5416_PCI:
-	case AR_SREV_VERSION_5416_PCIE:
-	case AR_SREV_VERSION_9160:
-	case AR_SREV_VERSION_9100:
-	case AR_SREV_VERSION_9280:
-	case AR_SREV_VERSION_9285:
-	case AR_SREV_VERSION_9287:
-	case AR_SREV_VERSION_9271:
-		return true;
-	default:
-		break;
-	}
-	return false;
-}
-
 static void ar9002_hw_init_mode_regs(struct ath_hw *ah)
 {
 	if (AR_SREV_9271(ah)) {
@@ -410,6 +392,9 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah,
 			val &= ~(AR_WA_BIT6 | AR_WA_BIT7);
 		}
 
+		if (AR_SREV_9280(ah))
+			val |= AR_WA_BIT22;
+
 		if (AR_SREV_9285E_20(ah))
 			val |= AR_WA_BIT23;
 
@@ -491,9 +476,9 @@ int ar9002_hw_rf_claim(struct ath_hw *ah)
 	case AR_RAD2122_SREV_MAJOR:
 		break;
 	default:
-		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-			  "Radio Chip Rev 0x%02X not supported\n",
-			  val & AR_RADIO_SREV_MAJOR);
+		ath_err(ath9k_hw_common(ah),
+			"Radio Chip Rev 0x%02X not supported\n",
+			val & AR_RADIO_SREV_MAJOR);
 		return -EOPNOTSUPP;
 	}
 
@@ -562,7 +547,6 @@ void ar9002_hw_attach_ops(struct ath_hw *ah)
 
 	priv_ops->init_mode_regs = ar9002_hw_init_mode_regs;
 	priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs;
-	priv_ops->macversion_supported = ar9002_hw_macversion_supported;
 
 	ops->config_pci_powersave = ar9002_hw_configpcipowersave;
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_mac.c b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
index 50dda394f8b..399ab3bb299 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_mac.c
@@ -90,13 +90,10 @@ static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
 
 		*masked = isr & ATH9K_INT_COMMON;
 
-		if (ah->config.rx_intr_mitigation) {
-			if (isr & (AR_ISR_RXMINTR | AR_ISR_RXINTM))
-				*masked |= ATH9K_INT_RX;
-		}
-
-		if (isr & (AR_ISR_RXOK | AR_ISR_RXERR))
+		if (isr & (AR_ISR_RXMINTR | AR_ISR_RXINTM |
+			   AR_ISR_RXOK | AR_ISR_RXERR))
 			*masked |= ATH9K_INT_RX;
+
 		if (isr &
 		    (AR_ISR_TXOK | AR_ISR_TXDESC | AR_ISR_TXERR |
 		     AR_ISR_TXEOL)) {
@@ -114,16 +111,8 @@ static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
 		}
 
 		if (isr & AR_ISR_RXORN) {
-			ath_print(common, ATH_DBG_INTERRUPT,
-				  "receive FIFO overrun interrupt\n");
-		}
-
-		if (!AR_SREV_9100(ah)) {
-			if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
-				u32 isr5 = REG_READ(ah, AR_ISR_S5_S);
-				if (isr5 & AR_ISR_S5_TIM_TIMER)
-					*masked |= ATH9K_INT_TIM_TIMER;
-			}
+			ath_dbg(common, ATH_DBG_INTERRUPT,
+				"receive FIFO overrun interrupt\n");
 		}
 
 		*masked |= mask2;
@@ -136,17 +125,18 @@ static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
 		u32 s5_s;
 
 		s5_s = REG_READ(ah, AR_ISR_S5_S);
-		if (isr & AR_ISR_GENTMR) {
-			ah->intr_gen_timer_trigger =
+		ah->intr_gen_timer_trigger =
 				MS(s5_s, AR_ISR_S5_GENTIMER_TRIG);
 
-			ah->intr_gen_timer_thresh =
-				MS(s5_s, AR_ISR_S5_GENTIMER_THRESH);
+		ah->intr_gen_timer_thresh =
+			MS(s5_s, AR_ISR_S5_GENTIMER_THRESH);
 
-			if (ah->intr_gen_timer_trigger)
-				*masked |= ATH9K_INT_GENTIMER;
+		if (ah->intr_gen_timer_trigger)
+			*masked |= ATH9K_INT_GENTIMER;
 
-		}
+		if ((s5_s & AR_ISR_S5_TIM_TIMER) &&
+		    !(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
+			*masked |= ATH9K_INT_TIM_TIMER;
 	}
 
 	if (sync_cause) {
@@ -157,25 +147,25 @@ static bool ar9002_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
 
 		if (fatal_int) {
 			if (sync_cause & AR_INTR_SYNC_HOST1_FATAL) {
-				ath_print(common, ATH_DBG_ANY,
-					  "received PCI FATAL interrupt\n");
+				ath_dbg(common, ATH_DBG_ANY,
+					"received PCI FATAL interrupt\n");
 			}
 			if (sync_cause & AR_INTR_SYNC_HOST1_PERR) {
-				ath_print(common, ATH_DBG_ANY,
-					  "received PCI PERR interrupt\n");
+				ath_dbg(common, ATH_DBG_ANY,
+					"received PCI PERR interrupt\n");
 			}
 			*masked |= ATH9K_INT_FATAL;
 		}
 		if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
-			ath_print(common, ATH_DBG_INTERRUPT,
-				  "AR_INTR_SYNC_RADM_CPL_TIMEOUT\n");
+			ath_dbg(common, ATH_DBG_INTERRUPT,
+				"AR_INTR_SYNC_RADM_CPL_TIMEOUT\n");
 			REG_WRITE(ah, AR_RC, AR_RC_HOSTIF);
 			REG_WRITE(ah, AR_RC, 0);
 			*masked |= ATH9K_INT_FATAL;
 		}
 		if (sync_cause & AR_INTR_SYNC_LOCAL_TIMEOUT) {
-			ath_print(common, ATH_DBG_INTERRUPT,
-				  "AR_INTR_SYNC_LOCAL_TIMEOUT\n");
+			ath_dbg(common, ATH_DBG_INTERRUPT,
+				"AR_INTR_SYNC_LOCAL_TIMEOUT\n");
 		}
 
 		REG_WRITE(ah, AR_INTR_SYNC_CAUSE_CLR, sync_cause);
@@ -218,77 +208,70 @@ static int ar9002_hw_proc_txdesc(struct ath_hw *ah, void *ds,
 				 struct ath_tx_status *ts)
 {
 	struct ar5416_desc *ads = AR5416DESC(ds);
+	u32 status;
 
-	if ((ads->ds_txstatus9 & AR_TxDone) == 0)
+	status = ACCESS_ONCE(ads->ds_txstatus9);
+	if ((status & AR_TxDone) == 0)
 		return -EINPROGRESS;
 
-	ts->ts_seqnum = MS(ads->ds_txstatus9, AR_SeqNum);
 	ts->ts_tstamp = ads->AR_SendTimestamp;
 	ts->ts_status = 0;
 	ts->ts_flags = 0;
 
-	if (ads->ds_txstatus1 & AR_FrmXmitOK)
+	if (status & AR_TxOpExceeded)
+		ts->ts_status |= ATH9K_TXERR_XTXOP;
+	ts->tid = MS(status, AR_TxTid);
+	ts->ts_rateindex = MS(status, AR_FinalTxIdx);
+	ts->ts_seqnum = MS(status, AR_SeqNum);
+
+	status = ACCESS_ONCE(ads->ds_txstatus0);
+	ts->ts_rssi_ctl0 = MS(status, AR_TxRSSIAnt00);
+	ts->ts_rssi_ctl1 = MS(status, AR_TxRSSIAnt01);
+	ts->ts_rssi_ctl2 = MS(status, AR_TxRSSIAnt02);
+	if (status & AR_TxBaStatus) {
+		ts->ts_flags |= ATH9K_TX_BA;
+		ts->ba_low = ads->AR_BaBitmapLow;
+		ts->ba_high = ads->AR_BaBitmapHigh;
+	}
+
+	status = ACCESS_ONCE(ads->ds_txstatus1);
+	if (status & AR_FrmXmitOK)
 		ts->ts_status |= ATH9K_TX_ACKED;
-	if (ads->ds_txstatus1 & AR_ExcessiveRetries)
-		ts->ts_status |= ATH9K_TXERR_XRETRY;
-	if (ads->ds_txstatus1 & AR_Filtered)
-		ts->ts_status |= ATH9K_TXERR_FILT;
-	if (ads->ds_txstatus1 & AR_FIFOUnderrun) {
-		ts->ts_status |= ATH9K_TXERR_FIFO;
-		ath9k_hw_updatetxtriglevel(ah, true);
+	else {
+		if (status & AR_ExcessiveRetries)
+			ts->ts_status |= ATH9K_TXERR_XRETRY;
+		if (status & AR_Filtered)
+			ts->ts_status |= ATH9K_TXERR_FILT;
+		if (status & AR_FIFOUnderrun) {
+			ts->ts_status |= ATH9K_TXERR_FIFO;
+			ath9k_hw_updatetxtriglevel(ah, true);
+		}
 	}
-	if (ads->ds_txstatus9 & AR_TxOpExceeded)
-		ts->ts_status |= ATH9K_TXERR_XTXOP;
-	if (ads->ds_txstatus1 & AR_TxTimerExpired)
+	if (status & AR_TxTimerExpired)
 		ts->ts_status |= ATH9K_TXERR_TIMER_EXPIRED;
-
-	if (ads->ds_txstatus1 & AR_DescCfgErr)
+	if (status & AR_DescCfgErr)
 		ts->ts_flags |= ATH9K_TX_DESC_CFG_ERR;
-	if (ads->ds_txstatus1 & AR_TxDataUnderrun) {
+	if (status & AR_TxDataUnderrun) {
 		ts->ts_flags |= ATH9K_TX_DATA_UNDERRUN;
 		ath9k_hw_updatetxtriglevel(ah, true);
 	}
-	if (ads->ds_txstatus1 & AR_TxDelimUnderrun) {
+	if (status & AR_TxDelimUnderrun) {
 		ts->ts_flags |= ATH9K_TX_DELIM_UNDERRUN;
 		ath9k_hw_updatetxtriglevel(ah, true);
 	}
-	if (ads->ds_txstatus0 & AR_TxBaStatus) {
-		ts->ts_flags |= ATH9K_TX_BA;
-		ts->ba_low = ads->AR_BaBitmapLow;
-		ts->ba_high = ads->AR_BaBitmapHigh;
-	}
+	ts->ts_shortretry = MS(status, AR_RTSFailCnt);
+	ts->ts_longretry = MS(status, AR_DataFailCnt);
+	ts->ts_virtcol = MS(status, AR_VirtRetryCnt);
 
-	ts->ts_rateindex = MS(ads->ds_txstatus9, AR_FinalTxIdx);
-	switch (ts->ts_rateindex) {
-	case 0:
-		ts->ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate0);
-		break;
-	case 1:
-		ts->ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate1);
-		break;
-	case 2:
-		ts->ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate2);
-		break;
-	case 3:
-		ts->ts_ratecode = MS(ads->ds_ctl3, AR_XmitRate3);
-		break;
-	}
+	status = ACCESS_ONCE(ads->ds_txstatus5);
+	ts->ts_rssi = MS(status, AR_TxRSSICombined);
+	ts->ts_rssi_ext0 = MS(status, AR_TxRSSIAnt10);
+	ts->ts_rssi_ext1 = MS(status, AR_TxRSSIAnt11);
+	ts->ts_rssi_ext2 = MS(status, AR_TxRSSIAnt12);
 
-	ts->ts_rssi = MS(ads->ds_txstatus5, AR_TxRSSICombined);
-	ts->ts_rssi_ctl0 = MS(ads->ds_txstatus0, AR_TxRSSIAnt00);
-	ts->ts_rssi_ctl1 = MS(ads->ds_txstatus0, AR_TxRSSIAnt01);
-	ts->ts_rssi_ctl2 = MS(ads->ds_txstatus0, AR_TxRSSIAnt02);
-	ts->ts_rssi_ext0 = MS(ads->ds_txstatus5, AR_TxRSSIAnt10);
-	ts->ts_rssi_ext1 = MS(ads->ds_txstatus5, AR_TxRSSIAnt11);
-	ts->ts_rssi_ext2 = MS(ads->ds_txstatus5, AR_TxRSSIAnt12);
 	ts->evm0 = ads->AR_TxEVM0;
 	ts->evm1 = ads->AR_TxEVM1;
 	ts->evm2 = ads->AR_TxEVM2;
-	ts->ts_shortretry = MS(ads->ds_txstatus1, AR_RTSFailCnt);
-	ts->ts_longretry = MS(ads->ds_txstatus1, AR_DataFailCnt);
-	ts->ts_virtcol = MS(ads->ds_txstatus1, AR_VirtRetryCnt);
-	ts->tid = MS(ads->ds_txstatus9, AR_TxTid);
-	ts->ts_antenna = 0;
 
 	return 0;
 }
@@ -300,7 +283,6 @@ static void ar9002_hw_set11n_txdesc(struct ath_hw *ah, void *ds,
 {
 	struct ar5416_desc *ads = AR5416DESC(ds);
 
-	txPower += ah->txpower_indexoffset;
 	if (txPower > 63)
 		txPower = 63;
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
index c00cdc67b55..7d68d61e406 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c
@@ -175,13 +175,15 @@ static void ar9002_hw_spur_mitigate(struct ath_hw *ah,
 	int upper, lower, cur_vit_mask;
 	int tmp, newVal;
 	int i;
-	int pilot_mask_reg[4] = { AR_PHY_TIMING7, AR_PHY_TIMING8,
-			  AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
+	static const int pilot_mask_reg[4] = {
+		AR_PHY_TIMING7, AR_PHY_TIMING8,
+		AR_PHY_PILOT_MASK_01_30, AR_PHY_PILOT_MASK_31_60
 	};
-	int chan_mask_reg[4] = { AR_PHY_TIMING9, AR_PHY_TIMING10,
-			 AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
+	static const int chan_mask_reg[4] = {
+		AR_PHY_TIMING9, AR_PHY_TIMING10,
+		AR_PHY_CHANNEL_MASK_01_30, AR_PHY_CHANNEL_MASK_31_60
 	};
-	int inc[4] = { 0, 100, 0, 0 };
+	static const int inc[4] = { 0, 100, 0, 0 };
 	struct chan_centers centers;
 
 	int8_t mask_m[123];
@@ -201,13 +203,14 @@ static void ar9002_hw_spur_mitigate(struct ath_hw *ah,
 	for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
 		cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
 
+		if (AR_NO_SPUR == cur_bb_spur)
+			break;
+
 		if (is2GHz)
 			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_2GHZ;
 		else
 			cur_bb_spur = (cur_bb_spur / 10) + AR_BASE_FREQ_5GHZ;
 
-		if (AR_NO_SPUR == cur_bb_spur)
-			break;
 		cur_bb_spur = cur_bb_spur - freq;
 
 		if (IS_CHAN_HT40(chan)) {
@@ -473,21 +476,21 @@ static void ar9002_hw_do_getnf(struct ath_hw *ah,
 	int16_t nf;
 
 	nf = MS(REG_READ(ah, AR_PHY_CCA), AR9280_PHY_MINCCA_PWR);
-	nfarray[0] = sign_extend(nf, 9);
+	nfarray[0] = sign_extend32(nf, 8);
 
 	nf = MS(REG_READ(ah, AR_PHY_EXT_CCA), AR9280_PHY_EXT_MINCCA_PWR);
 	if (IS_CHAN_HT40(ah->curchan))
-		nfarray[3] = sign_extend(nf, 9);
+		nfarray[3] = sign_extend32(nf, 8);
 
 	if (AR_SREV_9285(ah) || AR_SREV_9271(ah))
 		return;
 
 	nf = MS(REG_READ(ah, AR_PHY_CH1_CCA), AR9280_PHY_CH1_MINCCA_PWR);
-	nfarray[1] = sign_extend(nf, 9);
+	nfarray[1] = sign_extend32(nf, 8);
 
 	nf = MS(REG_READ(ah, AR_PHY_CH1_EXT_CCA), AR9280_PHY_CH1_EXT_MINCCA_PWR);
 	if (IS_CHAN_HT40(ah->curchan))
-		nfarray[4] = sign_extend(nf, 9);
+		nfarray[4] = sign_extend32(nf, 8);
 }
 
 static void ar9002_hw_set_nf_limits(struct ath_hw *ah)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index a14a5e43cf5..81f9cf294de 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -34,9 +34,9 @@ static const u32 ar9300_2p2_radio_postamble[][5] = {
 
 static const u32 ar9300Modes_lowest_ob_db_tx_gain_table_2p2[][5] = {
 	/* Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20   */
-	{0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x00637800, 0x00637800},
-	{0x0000a2e0, 0x0000f800, 0x0000f800, 0x03838000, 0x03838000},
-	{0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03fc0000, 0x03fc0000},
+	{0x0000a2dc, 0x00033800, 0x00033800, 0x00637800, 0x00637800},
+	{0x0000a2e0, 0x0003c000, 0x0003c000, 0x03838000, 0x03838000},
+	{0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03fc0000, 0x03fc0000},
 	{0x0000a2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9},
 	{0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
@@ -56,21 +56,21 @@ static const u32 ar9300Modes_lowest_ob_db_tx_gain_table_2p2[][5] = {
 	{0x0000a538, 0x4702244a, 0x4702244a, 0x34000e24, 0x34000e24},
 	{0x0000a53c, 0x4b02244c, 0x4b02244c, 0x38001640, 0x38001640},
 	{0x0000a540, 0x4e02246c, 0x4e02246c, 0x3c001660, 0x3c001660},
-	{0x0000a544, 0x5302266c, 0x5302266c, 0x3f001861, 0x3f001861},
-	{0x0000a548, 0x5702286c, 0x5702286c, 0x43001a81, 0x43001a81},
-	{0x0000a54c, 0x5c02486b, 0x5c02486b, 0x47001a83, 0x47001a83},
-	{0x0000a550, 0x61024a6c, 0x61024a6c, 0x4a001c84, 0x4a001c84},
-	{0x0000a554, 0x66026a6c, 0x66026a6c, 0x4e001ce3, 0x4e001ce3},
-	{0x0000a558, 0x6b026e6c, 0x6b026e6c, 0x52001ce5, 0x52001ce5},
-	{0x0000a55c, 0x7002708c, 0x7002708c, 0x56001ce9, 0x56001ce9},
-	{0x0000a560, 0x7302b08a, 0x7302b08a, 0x5a001ceb, 0x5a001ceb},
-	{0x0000a564, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a568, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a56c, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a570, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a574, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a578, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
-	{0x0000a57c, 0x7702b08c, 0x7702b08c, 0x5d001eec, 0x5d001eec},
+	{0x0000a544, 0x52022470, 0x52022470, 0x3f001861, 0x3f001861},
+	{0x0000a548, 0x55022490, 0x55022490, 0x43001a81, 0x43001a81},
+	{0x0000a54c, 0x59022492, 0x59022492, 0x47001a83, 0x47001a83},
+	{0x0000a550, 0x5d022692, 0x5d022692, 0x4a001c84, 0x4a001c84},
+	{0x0000a554, 0x61022892, 0x61022892, 0x4e001ce3, 0x4e001ce3},
+	{0x0000a558, 0x65024890, 0x65024890, 0x52001ce5, 0x52001ce5},
+	{0x0000a55c, 0x69024892, 0x69024892, 0x56001ce9, 0x56001ce9},
+	{0x0000a560, 0x6e024c92, 0x6e024c92, 0x5a001ceb, 0x5a001ceb},
+	{0x0000a564, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a568, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a56c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a570, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a574, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a578, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
+	{0x0000a57c, 0x74026e92, 0x74026e92, 0x5d001eec, 0x5d001eec},
 	{0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000},
 	{0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002},
 	{0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004},
@@ -88,44 +88,44 @@ static const u32 ar9300Modes_lowest_ob_db_tx_gain_table_2p2[][5] = {
 	{0x0000a5b8, 0x4782244a, 0x4782244a, 0x34800e24, 0x34800e24},
 	{0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x38801640, 0x38801640},
 	{0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x3c801660, 0x3c801660},
-	{0x0000a5c4, 0x5382266c, 0x5382266c, 0x3f801861, 0x3f801861},
-	{0x0000a5c8, 0x5782286c, 0x5782286c, 0x43801a81, 0x43801a81},
-	{0x0000a5cc, 0x5c82486b, 0x5c82486b, 0x47801a83, 0x47801a83},
-	{0x0000a5d0, 0x61824a6c, 0x61824a6c, 0x4a801c84, 0x4a801c84},
-	{0x0000a5d4, 0x66826a6c, 0x66826a6c, 0x4e801ce3, 0x4e801ce3},
-	{0x0000a5d8, 0x6b826e6c, 0x6b826e6c, 0x52801ce5, 0x52801ce5},
-	{0x0000a5dc, 0x7082708c, 0x7082708c, 0x56801ce9, 0x56801ce9},
-	{0x0000a5e0, 0x7382b08a, 0x7382b08a, 0x5a801ceb, 0x5a801ceb},
-	{0x0000a5e4, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5e8, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5ec, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f0, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f4, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5f8, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
-	{0x0000a5fc, 0x7782b08c, 0x7782b08c, 0x5d801eec, 0x5d801eec},
+	{0x0000a5c4, 0x52822470, 0x52822470, 0x3f801861, 0x3f801861},
+	{0x0000a5c8, 0x55822490, 0x55822490, 0x43801a81, 0x43801a81},
+	{0x0000a5cc, 0x59822492, 0x59822492, 0x47801a83, 0x47801a83},
+	{0x0000a5d0, 0x5d822692, 0x5d822692, 0x4a801c84, 0x4a801c84},
+	{0x0000a5d4, 0x61822892, 0x61822892, 0x4e801ce3, 0x4e801ce3},
+	{0x0000a5d8, 0x65824890, 0x65824890, 0x52801ce5, 0x52801ce5},
+	{0x0000a5dc, 0x69824892, 0x69824892, 0x56801ce9, 0x56801ce9},
+	{0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x5a801ceb, 0x5a801ceb},
+	{0x0000a5e4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5e8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5ec, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5f0, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5f4, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5f8, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
+	{0x0000a5fc, 0x74826e92, 0x74826e92, 0x5d801eec, 0x5d801eec},
 	{0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000a614, 0x01404000, 0x01404000, 0x01404000, 0x01404000},
-	{0x0000a618, 0x01404501, 0x01404501, 0x01404501, 0x01404501},
-	{0x0000a61c, 0x02008802, 0x02008802, 0x02008501, 0x02008501},
-	{0x0000a620, 0x0300cc03, 0x0300cc03, 0x0280ca03, 0x0280ca03},
-	{0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04},
-	{0x0000a628, 0x0300cc03, 0x0300cc03, 0x04014c04, 0x04014c04},
-	{0x0000a62c, 0x03810c03, 0x03810c03, 0x04015005, 0x04015005},
-	{0x0000a630, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
-	{0x0000a634, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
-	{0x0000a638, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
-	{0x0000a63c, 0x03810e04, 0x03810e04, 0x04015005, 0x04015005},
-	{0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x00637800, 0x00637800},
-	{0x0000b2e0, 0x0000f800, 0x0000f800, 0x03838000, 0x03838000},
-	{0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03fc0000, 0x03fc0000},
+	{0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000},
+	{0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501},
+	{0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501},
+	{0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03},
+	{0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04},
+	{0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04},
+	{0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+	{0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+	{0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+	{0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+	{0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005},
+	{0x0000b2dc, 0x00033800, 0x00033800, 0x00637800, 0x00637800},
+	{0x0000b2e0, 0x0003c000, 0x0003c000, 0x03838000, 0x03838000},
+	{0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03fc0000, 0x03fc0000},
 	{0x0000b2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
-	{0x0000c2dc, 0x0380c7fc, 0x0380c7fc, 0x00637800, 0x00637800},
-	{0x0000c2e0, 0x0000f800, 0x0000f800, 0x03838000, 0x03838000},
-	{0x0000c2e4, 0x03ff0000, 0x03ff0000, 0x03fc0000, 0x03fc0000},
+	{0x0000c2dc, 0x00033800, 0x00033800, 0x00637800, 0x00637800},
+	{0x0000c2e0, 0x0003c000, 0x0003c000, 0x03838000, 0x03838000},
+	{0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03fc0000, 0x03fc0000},
 	{0x0000c2e8, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
 	{0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4},
 	{0x00016048, 0x62480001, 0x62480001, 0x62480001, 0x62480001},
@@ -638,6 +638,7 @@ static const u32 ar9300_2p2_baseband_postamble[][5] = {
 	{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
 	{0x0000a204, 0x000037c0, 0x000037c4, 0x000037c4, 0x000037c0},
 	{0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004},
+	{0x0000a22c, 0x01026a2f, 0x01026a2f, 0x01026a2f, 0x01026a2f},
 	{0x0000a230, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b},
 	{0x0000a234, 0x00000fff, 0x10000fff, 0x10000fff, 0x00000fff},
 	{0x0000a238, 0xffb81018, 0xffb81018, 0xffb81018, 0xffb81018},
@@ -680,7 +681,7 @@ static const u32 ar9300_2p2_baseband_core[][2] = {
 	{0x0000981c, 0x00020028},
 	{0x00009834, 0x6400a290},
 	{0x00009838, 0x0108ecff},
-	{0x0000983c, 0x14750600},
+	{0x0000983c, 0x0d000600},
 	{0x00009880, 0x201fff00},
 	{0x00009884, 0x00001042},
 	{0x000098a4, 0x00200400},
@@ -722,7 +723,6 @@ static const u32 ar9300_2p2_baseband_core[][2] = {
 	{0x0000a220, 0x00000000},
 	{0x0000a224, 0x00000000},
 	{0x0000a228, 0x10002310},
-	{0x0000a22c, 0x01036a27},
 	{0x0000a23c, 0x00000000},
 	{0x0000a244, 0x0c000000},
 	{0x0000a2a0, 0x00000001},
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 9e6edffe0bd..4a4cd88429c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -18,6 +18,16 @@
 #include "hw-ops.h"
 #include "ar9003_phy.h"
 
+#define MPASS	3
+#define MAX_MEASUREMENT	8
+#define MAX_DIFFERENCE	10
+
+struct coeff {
+	int mag_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MPASS];
+	int phs_coeff[AR9300_MAX_CHAINS][MAX_MEASUREMENT][MPASS];
+	int iqc_coeff[2];
+};
+
 enum ar9003_cal_types {
 	IQ_MISMATCH_CAL = BIT(0),
 	TEMP_COMP_CAL = BIT(1),
@@ -40,8 +50,8 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah,
 		currCal->calData->calCountMax);
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "starting IQ Mismatch Calibration\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"starting IQ Mismatch Calibration\n");
 
 		/* Kick-off cal */
 		REG_SET_BIT(ah, AR_PHY_TIMING4, AR_PHY_TIMING4_DO_CAL);
@@ -52,8 +62,8 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah,
 		REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM,
 			      AR_PHY_65NM_CH0_THERM_START, 1);
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "starting Temperature Compensation Calibration\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"starting Temperature Compensation Calibration\n");
 		break;
 	}
 }
@@ -181,11 +191,11 @@ static void ar9003_hw_iqcal_collect(struct ath_hw *ah)
 			REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
 		ah->totalIqCorrMeas[i] +=
 			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
-		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
-			  "%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
-			  ah->cal_samples, i, ah->totalPowerMeasI[i],
-			  ah->totalPowerMeasQ[i],
-			  ah->totalIqCorrMeas[i]);
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			"%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
+			ah->cal_samples, i, ah->totalPowerMeasI[i],
+			ah->totalPowerMeasQ[i],
+			ah->totalIqCorrMeas[i]);
 	}
 }
 
@@ -196,7 +206,7 @@ static void ar9003_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 	u32 qCoffDenom, iCoffDenom;
 	int32_t qCoff, iCoff;
 	int iqCorrNeg, i;
-	const u_int32_t offset_array[3] = {
+	static const u_int32_t offset_array[3] = {
 		AR_PHY_RX_IQCAL_CORR_B0,
 		AR_PHY_RX_IQCAL_CORR_B1,
 		AR_PHY_RX_IQCAL_CORR_B2,
@@ -207,13 +217,13 @@ static void ar9003_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 		powerMeasQ = ah->totalPowerMeasQ[i];
 		iqCorrMeas = ah->totalIqCorrMeas[i];
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Starting IQ Cal and Correction for Chain %d\n",
-			  i);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Starting IQ Cal and Correction for Chain %d\n",
+			i);
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Orignal: Chn %diq_corr_meas = 0x%08x\n",
-			  i, ah->totalIqCorrMeas[i]);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Orignal: Chn %diq_corr_meas = 0x%08x\n",
+			i, ah->totalIqCorrMeas[i]);
 
 		iqCorrNeg = 0;
 
@@ -222,12 +232,12 @@ static void ar9003_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 			iqCorrNeg = 1;
 		}
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
-		ath_print(common, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
-			  iqCorrNeg);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
+		ath_dbg(common, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
+			iqCorrNeg);
 
 		iCoffDenom = (powerMeasI / 2 + powerMeasQ / 2) / 256;
 		qCoffDenom = powerMeasQ / 64;
@@ -235,10 +245,10 @@ static void ar9003_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 		if ((iCoffDenom != 0) && (qCoffDenom != 0)) {
 			iCoff = iqCorrMeas / iCoffDenom;
 			qCoff = powerMeasI / qCoffDenom - 64;
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Chn %d iCoff = 0x%08x\n", i, iCoff);
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Chn %d qCoff = 0x%08x\n", i, qCoff);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Chn %d iCoff = 0x%08x\n", i, iCoff);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Chn %d qCoff = 0x%08x\n", i, qCoff);
 
 			/* Force bounds on iCoff */
 			if (iCoff >= 63)
@@ -259,14 +269,13 @@ static void ar9003_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 			iCoff = iCoff & 0x7f;
 			qCoff = qCoff & 0x7f;
 
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Chn %d : iCoff = 0x%x  qCoff = 0x%x\n",
-				  i, iCoff, qCoff);
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Register offset (0x%04x) "
-				  "before update = 0x%x\n",
-				  offset_array[i],
-				  REG_READ(ah, offset_array[i]));
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Chn %d : iCoff = 0x%x  qCoff = 0x%x\n",
+				i, iCoff, qCoff);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Register offset (0x%04x) before update = 0x%x\n",
+				offset_array[i],
+				REG_READ(ah, offset_array[i]));
 
 			REG_RMW_FIELD(ah, offset_array[i],
 				      AR_PHY_RX_IQCAL_CORR_IQCORR_Q_I_COFF,
@@ -274,33 +283,29 @@ static void ar9003_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 			REG_RMW_FIELD(ah, offset_array[i],
 				      AR_PHY_RX_IQCAL_CORR_IQCORR_Q_Q_COFF,
 				      qCoff);
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Register offset (0x%04x) QI COFF "
-				  "(bitfields 0x%08x) after update = 0x%x\n",
-				  offset_array[i],
-				  AR_PHY_RX_IQCAL_CORR_IQCORR_Q_I_COFF,
-				  REG_READ(ah, offset_array[i]));
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Register offset (0x%04x) QQ COFF "
-				  "(bitfields 0x%08x) after update = 0x%x\n",
-				  offset_array[i],
-				  AR_PHY_RX_IQCAL_CORR_IQCORR_Q_Q_COFF,
-				  REG_READ(ah, offset_array[i]));
-
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "IQ Cal and Correction done for Chain %d\n",
-				  i);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Register offset (0x%04x) QI COFF (bitfields 0x%08x) after update = 0x%x\n",
+				offset_array[i],
+				AR_PHY_RX_IQCAL_CORR_IQCORR_Q_I_COFF,
+				REG_READ(ah, offset_array[i]));
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Register offset (0x%04x) QQ COFF (bitfields 0x%08x) after update = 0x%x\n",
+				offset_array[i],
+				AR_PHY_RX_IQCAL_CORR_IQCORR_Q_Q_COFF,
+				REG_READ(ah, offset_array[i]));
+
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"IQ Cal and Correction done for Chain %d\n", i);
 		}
 	}
 
 	REG_SET_BIT(ah, AR_PHY_RX_IQCAL_CORR_B0,
 		    AR_PHY_RX_IQCAL_CORR_IQCORR_ENABLE);
-	ath_print(common, ATH_DBG_CALIBRATE,
-		  "IQ Cal and Correction (offset 0x%04x) enabled "
-		  "(bit position 0x%08x). New Value 0x%08x\n",
-		  (unsigned) (AR_PHY_RX_IQCAL_CORR_B0),
-		  AR_PHY_RX_IQCAL_CORR_IQCORR_ENABLE,
-		  REG_READ(ah, AR_PHY_RX_IQCAL_CORR_B0));
+	ath_dbg(common, ATH_DBG_CALIBRATE,
+		"IQ Cal and Correction (offset 0x%04x) enabled (bit position 0x%08x). New Value 0x%08x\n",
+		(unsigned) (AR_PHY_RX_IQCAL_CORR_B0),
+		AR_PHY_RX_IQCAL_CORR_IQCORR_ENABLE,
+		REG_READ(ah, AR_PHY_RX_IQCAL_CORR_B0));
 }
 
 static const struct ath9k_percal_data iq_cal_single_sample = {
@@ -340,7 +345,7 @@ static bool ar9003_hw_solve_iq_cal(struct ath_hw *ah,
 	f2 = (f1 * f1 + f3 * f3) / result_shift;
 
 	if (!f2) {
-		ath_print(common, ATH_DBG_CALIBRATE, "Divide by 0\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE, "Divide by 0\n");
 		return false;
 	}
 
@@ -461,11 +466,14 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 
 	if ((i2_p_q2_a0_d0 == 0) || (i2_p_q2_a0_d1 == 0) ||
 	    (i2_p_q2_a1_d0 == 0) || (i2_p_q2_a1_d1 == 0)) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Divide by 0:\na0_d0=%d\n"
-			  "a0_d1=%d\na2_d0=%d\na1_d1=%d\n",
-			  i2_p_q2_a0_d0, i2_p_q2_a0_d1,
-			  i2_p_q2_a1_d0, i2_p_q2_a1_d1);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Divide by 0:\n"
+			"a0_d0=%d\n"
+			"a0_d1=%d\n"
+			"a2_d0=%d\n"
+			"a1_d1=%d\n",
+			i2_p_q2_a0_d0, i2_p_q2_a0_d1,
+			i2_p_q2_a1_d0, i2_p_q2_a1_d1);
 		return false;
 	}
 
@@ -498,9 +506,9 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 	mag2 = ar9003_hw_find_mag_approx(ah, cos_2phi_2, sin_2phi_2);
 
 	if ((mag1 == 0) || (mag2 == 0)) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Divide by 0: mag1=%d, mag2=%d\n",
-			  mag1, mag2);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Divide by 0: mag1=%d, mag2=%d\n",
+			mag1, mag2);
 		return false;
 	}
 
@@ -517,8 +525,8 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 			     mag_a0_d0, phs_a0_d0,
 			     mag_a1_d0,
 			     phs_a1_d0, solved_eq)) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Call to ar9003_hw_solve_iq_cal() failed.\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Call to ar9003_hw_solve_iq_cal() failed.\n");
 		return false;
 	}
 
@@ -527,14 +535,14 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 	mag_rx = solved_eq[2];
 	phs_rx = solved_eq[3];
 
-	ath_print(common, ATH_DBG_CALIBRATE,
-		  "chain %d: mag mismatch=%d phase mismatch=%d\n",
-		  chain_idx, mag_tx/res_scale, phs_tx/res_scale);
+	ath_dbg(common, ATH_DBG_CALIBRATE,
+		"chain %d: mag mismatch=%d phase mismatch=%d\n",
+		chain_idx, mag_tx/res_scale, phs_tx/res_scale);
 
 	if (res_scale == mag_tx) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Divide by 0: mag_tx=%d, res_scale=%d\n",
-			  mag_tx, res_scale);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Divide by 0: mag_tx=%d, res_scale=%d\n",
+			mag_tx, res_scale);
 		return false;
 	}
 
@@ -545,9 +553,9 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 	q_q_coff = (mag_corr_tx * 128 / res_scale);
 	q_i_coff = (phs_corr_tx * 256 / res_scale);
 
-	ath_print(common, ATH_DBG_CALIBRATE,
-		  "tx chain %d: mag corr=%d  phase corr=%d\n",
-		  chain_idx, q_q_coff, q_i_coff);
+	ath_dbg(common, ATH_DBG_CALIBRATE,
+		"tx chain %d: mag corr=%d  phase corr=%d\n",
+		chain_idx, q_q_coff, q_i_coff);
 
 	if (q_i_coff < -63)
 		q_i_coff = -63;
@@ -560,14 +568,14 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 
 	iqc_coeff[0] = (q_q_coff * 128) + q_i_coff;
 
-	ath_print(common, ATH_DBG_CALIBRATE,
-		  "tx chain %d: iq corr coeff=%x\n",
-		  chain_idx, iqc_coeff[0]);
+	ath_dbg(common, ATH_DBG_CALIBRATE,
+		"tx chain %d: iq corr coeff=%x\n",
+		chain_idx, iqc_coeff[0]);
 
 	if (-mag_rx == res_scale) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Divide by 0: mag_rx=%d, res_scale=%d\n",
-			  mag_rx, res_scale);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Divide by 0: mag_rx=%d, res_scale=%d\n",
+			mag_rx, res_scale);
 		return false;
 	}
 
@@ -578,9 +586,9 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 	q_q_coff = (mag_corr_rx * 128 / res_scale);
 	q_i_coff = (phs_corr_rx * 256 / res_scale);
 
-	ath_print(common, ATH_DBG_CALIBRATE,
-		  "rx chain %d: mag corr=%d  phase corr=%d\n",
-		  chain_idx, q_q_coff, q_i_coff);
+	ath_dbg(common, ATH_DBG_CALIBRATE,
+		"rx chain %d: mag corr=%d  phase corr=%d\n",
+		chain_idx, q_q_coff, q_i_coff);
 
 	if (q_i_coff < -63)
 		q_i_coff = -63;
@@ -593,140 +601,367 @@ static bool ar9003_hw_calc_iq_corr(struct ath_hw *ah,
 
 	iqc_coeff[1] = (q_q_coff * 128) + q_i_coff;
 
-	ath_print(common, ATH_DBG_CALIBRATE,
-		  "rx chain %d: iq corr coeff=%x\n",
-		  chain_idx, iqc_coeff[1]);
+	ath_dbg(common, ATH_DBG_CALIBRATE,
+		"rx chain %d: iq corr coeff=%x\n",
+		chain_idx, iqc_coeff[1]);
+
+	return true;
+}
+
+static bool ar9003_hw_compute_closest_pass_and_avg(int *mp_coeff, int *mp_avg)
+{
+	int diff[MPASS];
+
+	diff[0] = abs(mp_coeff[0] - mp_coeff[1]);
+	diff[1] = abs(mp_coeff[1] - mp_coeff[2]);
+	diff[2] = abs(mp_coeff[2] - mp_coeff[0]);
+
+	if (diff[0] > MAX_DIFFERENCE &&
+	    diff[1] > MAX_DIFFERENCE &&
+	    diff[2] > MAX_DIFFERENCE)
+		return false;
+
+	if (diff[0] <= diff[1] && diff[0] <= diff[2])
+		*mp_avg = (mp_coeff[0] + mp_coeff[1]) / 2;
+	else if (diff[1] <= diff[2])
+		*mp_avg = (mp_coeff[1] + mp_coeff[2]) / 2;
+	else
+		*mp_avg = (mp_coeff[2] + mp_coeff[0]) / 2;
 
 	return true;
 }
 
+static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah,
+						 u8 num_chains,
+						 struct coeff *coeff)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	int i, im, nmeasurement;
+	int magnitude, phase;
+	u32 tx_corr_coeff[MAX_MEASUREMENT][AR9300_MAX_CHAINS];
+
+	memset(tx_corr_coeff, 0, sizeof(tx_corr_coeff));
+	for (i = 0; i < MAX_MEASUREMENT / 2; i++) {
+		tx_corr_coeff[i * 2][0] = tx_corr_coeff[(i * 2) + 1][0] =
+					AR_PHY_TX_IQCAL_CORR_COEFF_B0(i);
+		if (!AR_SREV_9485(ah)) {
+			tx_corr_coeff[i * 2][1] =
+			tx_corr_coeff[(i * 2) + 1][1] =
+					AR_PHY_TX_IQCAL_CORR_COEFF_B1(i);
+
+			tx_corr_coeff[i * 2][2] =
+			tx_corr_coeff[(i * 2) + 1][2] =
+					AR_PHY_TX_IQCAL_CORR_COEFF_B2(i);
+		}
+	}
+
+	/* Load the average of 2 passes */
+	for (i = 0; i < num_chains; i++) {
+		if (AR_SREV_9485(ah))
+			nmeasurement = REG_READ_FIELD(ah,
+					AR_PHY_TX_IQCAL_STATUS_B0_9485,
+					AR_PHY_CALIBRATED_GAINS_0);
+		else
+			nmeasurement = REG_READ_FIELD(ah,
+					AR_PHY_TX_IQCAL_STATUS_B0,
+					AR_PHY_CALIBRATED_GAINS_0);
+
+		if (nmeasurement > MAX_MEASUREMENT)
+			nmeasurement = MAX_MEASUREMENT;
+
+		for (im = 0; im < nmeasurement; im++) {
+			/*
+			 * Determine which 2 passes are closest and compute avg
+			 * magnitude
+			 */
+			if (!ar9003_hw_compute_closest_pass_and_avg(coeff->mag_coeff[i][im],
+								    &magnitude))
+				goto disable_txiqcal;
+
+			/*
+			 * Determine which 2 passes are closest and compute avg
+			 * phase
+			 */
+			if (!ar9003_hw_compute_closest_pass_and_avg(coeff->phs_coeff[i][im],
+								    &phase))
+				goto disable_txiqcal;
+
+			coeff->iqc_coeff[0] = (magnitude & 0x7f) |
+					      ((phase & 0x7f) << 7);
+
+			if ((im % 2) == 0)
+				REG_RMW_FIELD(ah, tx_corr_coeff[im][i],
+					AR_PHY_TX_IQCAL_CORR_COEFF_00_COEFF_TABLE,
+					coeff->iqc_coeff[0]);
+			else
+				REG_RMW_FIELD(ah, tx_corr_coeff[im][i],
+					AR_PHY_TX_IQCAL_CORR_COEFF_01_COEFF_TABLE,
+					coeff->iqc_coeff[0]);
+		}
+	}
+
+	REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_3,
+		      AR_PHY_TX_IQCAL_CONTROL_3_IQCORR_EN, 0x1);
+	REG_RMW_FIELD(ah, AR_PHY_RX_IQCAL_CORR_B0,
+		      AR_PHY_RX_IQCAL_CORR_B0_LOOPBACK_IQCORR_EN, 0x1);
+
+	return;
+
+disable_txiqcal:
+	REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_3,
+		      AR_PHY_TX_IQCAL_CONTROL_3_IQCORR_EN, 0x0);
+	REG_RMW_FIELD(ah, AR_PHY_RX_IQCAL_CORR_B0,
+		      AR_PHY_RX_IQCAL_CORR_B0_LOOPBACK_IQCORR_EN, 0x0);
+
+	ath_dbg(common, ATH_DBG_CALIBRATE, "TX IQ Cal disabled\n");
+}
+
 static void ar9003_hw_tx_iq_cal(struct ath_hw *ah)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
-	const u32 txiqcal_status[AR9300_MAX_CHAINS] = {
+	static const u32 txiqcal_status[AR9300_MAX_CHAINS] = {
 		AR_PHY_TX_IQCAL_STATUS_B0,
 		AR_PHY_TX_IQCAL_STATUS_B1,
 		AR_PHY_TX_IQCAL_STATUS_B2,
 	};
-	const u32 tx_corr_coeff[AR9300_MAX_CHAINS] = {
-		AR_PHY_TX_IQCAL_CORR_COEFF_01_B0,
-		AR_PHY_TX_IQCAL_CORR_COEFF_01_B1,
-		AR_PHY_TX_IQCAL_CORR_COEFF_01_B2,
-	};
-	const u32 rx_corr[AR9300_MAX_CHAINS] = {
-		AR_PHY_RX_IQCAL_CORR_B0,
-		AR_PHY_RX_IQCAL_CORR_B1,
-		AR_PHY_RX_IQCAL_CORR_B2,
-	};
-	const u_int32_t chan_info_tab[] = {
+	static const u32 chan_info_tab[] = {
 		AR_PHY_CHAN_INFO_TAB_0,
 		AR_PHY_CHAN_INFO_TAB_1,
 		AR_PHY_CHAN_INFO_TAB_2,
 	};
+	struct coeff coeff;
 	s32 iq_res[6];
-	s32 iqc_coeff[2];
-	s32 i, j;
-	u32 num_chains = 0;
+	s32 i, j, ip, im, nmeasurement;
+	u8 nchains = get_streams(common->tx_chainmask);
+
+	for (ip = 0; ip < MPASS; ip++) {
+		REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_1,
+			      AR_PHY_TX_IQCAQL_CONTROL_1_IQCORR_I_Q_COFF_DELPT,
+			      DELPT);
+		REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_START,
+			      AR_PHY_TX_IQCAL_START_DO_CAL,
+			      AR_PHY_TX_IQCAL_START_DO_CAL);
+
+		if (!ath9k_hw_wait(ah, AR_PHY_TX_IQCAL_START,
+				   AR_PHY_TX_IQCAL_START_DO_CAL,
+				   0, AH_WAIT_TIMEOUT)) {
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Tx IQ Cal not complete.\n");
+			goto TX_IQ_CAL_FAILED;
+		}
 
-	for (i = 0; i < AR9300_MAX_CHAINS; i++) {
-		if (ah->txchainmask & (1 << i))
-			num_chains++;
-	}
+		nmeasurement = REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_STATUS_B0,
+					      AR_PHY_CALIBRATED_GAINS_0);
+			if (nmeasurement > MAX_MEASUREMENT)
+				nmeasurement = MAX_MEASUREMENT;
+
+		for (i = 0; i < nchains; i++) {
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"Doing Tx IQ Cal for chain %d.\n", i);
+			for (im = 0; im < nmeasurement; im++) {
+				if (REG_READ(ah, txiqcal_status[i]) &
+					     AR_PHY_TX_IQCAL_STATUS_FAILED) {
+					ath_dbg(common, ATH_DBG_CALIBRATE,
+						"Tx IQ Cal failed for chain %d.\n", i);
+					goto TX_IQ_CAL_FAILED;
+				}
 
-	REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_1,
-		      AR_PHY_TX_IQCAQL_CONTROL_1_IQCORR_I_Q_COFF_DELPT,
-		      DELPT);
-	REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_START,
-		      AR_PHY_TX_IQCAL_START_DO_CAL,
-		      AR_PHY_TX_IQCAL_START_DO_CAL);
+				for (j = 0; j < 3; j++) {
+					u8 idx = 2 * j,
+					   offset = 4 * (3 * im + j);
 
-	if (!ath9k_hw_wait(ah, AR_PHY_TX_IQCAL_START,
-			   AR_PHY_TX_IQCAL_START_DO_CAL,
-			   0, AH_WAIT_TIMEOUT)) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Tx IQ Cal not complete.\n");
-		goto TX_IQ_CAL_FAILED;
-	}
+					REG_RMW_FIELD(ah, AR_PHY_CHAN_INFO_MEMORY,
+						      AR_PHY_CHAN_INFO_TAB_S2_READ,
+						      0);
 
-	for (i = 0; i < num_chains; i++) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Doing Tx IQ Cal for chain %d.\n", i);
+					/* 32 bits */
+					iq_res[idx] = REG_READ(ah,
+							chan_info_tab[i] +
+							offset);
 
-		if (REG_READ(ah, txiqcal_status[i]) &
-			     AR_PHY_TX_IQCAL_STATUS_FAILED) {
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Tx IQ Cal failed for chain %d.\n", i);
-			goto TX_IQ_CAL_FAILED;
-		}
+					REG_RMW_FIELD(ah, AR_PHY_CHAN_INFO_MEMORY,
+						      AR_PHY_CHAN_INFO_TAB_S2_READ,
+						      1);
 
-		for (j = 0; j < 3; j++) {
-			u_int8_t idx = 2 * j,
-			offset = 4 * j;
+					/* 16 bits */
+					iq_res[idx+1] = 0xffff & REG_READ(ah,
+								chan_info_tab[i] +
+								offset);
 
-			REG_RMW_FIELD(ah, AR_PHY_CHAN_INFO_MEMORY,
-				      AR_PHY_CHAN_INFO_TAB_S2_READ, 0);
-
-			/* 32 bits */
-			iq_res[idx] = REG_READ(ah, chan_info_tab[i] + offset);
+					ath_dbg(common, ATH_DBG_CALIBRATE,
+						"IQ RES[%d]=0x%x IQ_RES[%d]=0x%x\n",
+						idx, iq_res[idx], idx+1, iq_res[idx+1]);
+				}
 
-			REG_RMW_FIELD(ah, AR_PHY_CHAN_INFO_MEMORY,
-				      AR_PHY_CHAN_INFO_TAB_S2_READ, 1);
+				if (!ar9003_hw_calc_iq_corr(ah, i, iq_res,
+							    coeff.iqc_coeff)) {
+					ath_dbg(common, ATH_DBG_CALIBRATE,
+						"Failed in calculation of IQ correction.\n");
+					goto TX_IQ_CAL_FAILED;
+				}
+				coeff.mag_coeff[i][im][ip] =
+						coeff.iqc_coeff[0] & 0x7f;
+				coeff.phs_coeff[i][im][ip] =
+						(coeff.iqc_coeff[0] >> 7) & 0x7f;
 
-			/* 16 bits */
-			iq_res[idx+1] = 0xffff & REG_READ(ah,
-							  chan_info_tab[i] +
-							  offset);
+				if (coeff.mag_coeff[i][im][ip] > 63)
+					coeff.mag_coeff[i][im][ip] -= 128;
+				if (coeff.phs_coeff[i][im][ip] > 63)
+					coeff.phs_coeff[i][im][ip] -= 128;
 
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "IQ RES[%d]=0x%x IQ_RES[%d]=0x%x\n",
-				  idx, iq_res[idx], idx+1, iq_res[idx+1]);
-		}
-
-		if (!ar9003_hw_calc_iq_corr(ah, i, iq_res, iqc_coeff)) {
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "Failed in calculation of IQ correction.\n");
-			goto TX_IQ_CAL_FAILED;
+			}
 		}
-
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "IQ_COEFF[0] = 0x%x IQ_COEFF[1] = 0x%x\n",
-			  iqc_coeff[0], iqc_coeff[1]);
-
-		REG_RMW_FIELD(ah, tx_corr_coeff[i],
-			      AR_PHY_TX_IQCAL_CORR_COEFF_01_COEFF_TABLE,
-			      iqc_coeff[0]);
-		REG_RMW_FIELD(ah, rx_corr[i],
-			      AR_PHY_RX_IQCAL_CORR_LOOPBACK_IQCORR_Q_Q_COFF,
-			      iqc_coeff[1] >> 7);
-		REG_RMW_FIELD(ah, rx_corr[i],
-			      AR_PHY_RX_IQCAL_CORR_LOOPBACK_IQCORR_Q_I_COFF,
-			      iqc_coeff[1]);
 	}
 
-	REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_3,
-		      AR_PHY_TX_IQCAL_CONTROL_3_IQCORR_EN, 0x1);
-	REG_RMW_FIELD(ah, AR_PHY_RX_IQCAL_CORR_B0,
-		      AR_PHY_RX_IQCAL_CORR_B0_LOOPBACK_IQCORR_EN, 0x1);
+	ar9003_hw_tx_iqcal_load_avg_2_passes(ah, nchains, &coeff);
 
 	return;
 
 TX_IQ_CAL_FAILED:
-	ath_print(common, ATH_DBG_CALIBRATE, "Tx IQ Cal failed\n");
+	ath_dbg(common, ATH_DBG_CALIBRATE, "Tx IQ Cal failed\n");
+}
+
+static void ar9003_hw_tx_iq_cal_run(struct ath_hw *ah)
+{
+	u8 tx_gain_forced;
+
+	REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_1_9485,
+		      AR_PHY_TX_IQCAQL_CONTROL_1_IQCORR_I_Q_COFF_DELPT, DELPT);
+	tx_gain_forced = REG_READ_FIELD(ah, AR_PHY_TX_FORCED_GAIN,
+					AR_PHY_TXGAIN_FORCE);
+	if (tx_gain_forced)
+		REG_RMW_FIELD(ah, AR_PHY_TX_FORCED_GAIN,
+			      AR_PHY_TXGAIN_FORCE, 0);
+
+	REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_START_9485,
+		      AR_PHY_TX_IQCAL_START_DO_CAL_9485, 1);
 }
 
+static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	const u32 txiqcal_status[AR9300_MAX_CHAINS] = {
+		AR_PHY_TX_IQCAL_STATUS_B0_9485,
+		AR_PHY_TX_IQCAL_STATUS_B1,
+		AR_PHY_TX_IQCAL_STATUS_B2,
+	};
+	const u_int32_t chan_info_tab[] = {
+		AR_PHY_CHAN_INFO_TAB_0,
+		AR_PHY_CHAN_INFO_TAB_1,
+		AR_PHY_CHAN_INFO_TAB_2,
+	};
+	struct coeff coeff;
+	s32 iq_res[6];
+	u8 num_chains = 0;
+	int i, ip, im, j;
+	int nmeasurement;
+
+	for (i = 0; i < AR9300_MAX_CHAINS; i++) {
+		if (ah->txchainmask & (1 << i))
+			num_chains++;
+	}
+
+	for (ip = 0; ip < MPASS; ip++) {
+		for (i = 0; i < num_chains; i++) {
+			nmeasurement = REG_READ_FIELD(ah,
+					AR_PHY_TX_IQCAL_STATUS_B0_9485,
+					AR_PHY_CALIBRATED_GAINS_0);
+			if (nmeasurement > MAX_MEASUREMENT)
+				nmeasurement = MAX_MEASUREMENT;
+
+			for (im = 0; im < nmeasurement; im++) {
+				ath_dbg(common, ATH_DBG_CALIBRATE,
+					"Doing Tx IQ Cal for chain %d.\n", i);
+
+				if (REG_READ(ah, txiqcal_status[i]) &
+				    AR_PHY_TX_IQCAL_STATUS_FAILED) {
+					ath_dbg(common, ATH_DBG_CALIBRATE,
+					"Tx IQ Cal failed for chain %d.\n", i);
+					goto tx_iqcal_fail;
+				}
+
+				for (j = 0; j < 3; j++) {
+					u32 idx = 2 * j, offset = 4 * (3 * im + j);
+
+					REG_RMW_FIELD(ah,
+						AR_PHY_CHAN_INFO_MEMORY,
+						AR_PHY_CHAN_INFO_TAB_S2_READ,
+						0);
+
+					/* 32 bits */
+					iq_res[idx] = REG_READ(ah,
+							chan_info_tab[i] +
+							offset);
+
+					REG_RMW_FIELD(ah,
+						AR_PHY_CHAN_INFO_MEMORY,
+						AR_PHY_CHAN_INFO_TAB_S2_READ,
+						1);
+
+					/* 16 bits */
+					iq_res[idx + 1] = 0xffff & REG_READ(ah,
+							  chan_info_tab[i] + offset);
+
+					ath_dbg(common, ATH_DBG_CALIBRATE,
+						"IQ RES[%d]=0x%x"
+						"IQ_RES[%d]=0x%x\n",
+						idx, iq_res[idx], idx + 1,
+						iq_res[idx + 1]);
+				}
+
+				if (!ar9003_hw_calc_iq_corr(ah, i, iq_res,
+							    coeff.iqc_coeff)) {
+					ath_dbg(common, ATH_DBG_CALIBRATE,
+					 "Failed in calculation of IQ correction.\n");
+					goto tx_iqcal_fail;
+				}
+
+				coeff.mag_coeff[i][im][ip] =
+						coeff.iqc_coeff[0] & 0x7f;
+				coeff.phs_coeff[i][im][ip] =
+						(coeff.iqc_coeff[0] >> 7) & 0x7f;
+
+				if (coeff.mag_coeff[i][im][ip] > 63)
+					coeff.mag_coeff[i][im][ip] -= 128;
+				if (coeff.phs_coeff[i][im][ip] > 63)
+					coeff.phs_coeff[i][im][ip] -= 128;
+			}
+		}
+	}
+	ar9003_hw_tx_iqcal_load_avg_2_passes(ah, num_chains, &coeff);
+
+	return;
+
+tx_iqcal_fail:
+	ath_dbg(common, ATH_DBG_CALIBRATE, "Tx IQ Cal failed\n");
+	return;
+}
 static bool ar9003_hw_init_cal(struct ath_hw *ah,
 			       struct ath9k_channel *chan)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
+	int val;
 
-	/*
-	 * 0x7 = 0b111 , AR9003 needs to be configured for 3-chain mode before
-	 * running AGC/TxIQ cals
-	 */
-	ar9003_hw_set_chain_masks(ah, 0x7, 0x7);
+	val = REG_READ(ah, AR_ENT_OTP);
+	ath_dbg(common, ATH_DBG_CALIBRATE, "ath9k: AR_ENT_OTP 0x%x\n", val);
+
+	if (AR_SREV_9485(ah))
+		ar9003_hw_set_chain_masks(ah, 0x1, 0x1);
+	else if (val & AR_ENT_OTP_CHAIN2_DISABLE)
+		ar9003_hw_set_chain_masks(ah, 0x3, 0x3);
+	else
+		/*
+		 * 0x7 = 0b111 , AR9003 needs to be configured for 3-chain
+		 * mode before running AGC/TxIQ cals
+		 */
+		ar9003_hw_set_chain_masks(ah, 0x7, 0x7);
 
 	/* Do Tx IQ Calibration */
-	ar9003_hw_tx_iq_cal(ah);
+	if (AR_SREV_9485(ah))
+		ar9003_hw_tx_iq_cal_run(ah);
+	else
+		ar9003_hw_tx_iq_cal(ah);
+
 	REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS);
 	udelay(5);
 	REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN);
@@ -739,12 +974,14 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
 	/* Poll for offset calibration complete */
 	if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
 			   0, AH_WAIT_TIMEOUT)) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "offset calibration failed to "
-			  "complete in 1ms; noisy environment?\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"offset calibration failed to complete in 1ms; noisy environment?\n");
 		return false;
 	}
 
+	if (AR_SREV_9485(ah))
+		ar9003_hw_tx_iq_cal_post_proc(ah);
+
 	/* Revert chainmasks to their original values before NF cal */
 	ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
 
@@ -757,15 +994,15 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
 	if (ah->supp_cals & IQ_MISMATCH_CAL) {
 		INIT_CAL(&ah->iq_caldata);
 		INSERT_CAL(ah, &ah->iq_caldata);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "enabling IQ Calibration.\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"enabling IQ Calibration.\n");
 	}
 
 	if (ah->supp_cals & TEMP_COMP_CAL) {
 		INIT_CAL(&ah->tempCompCalData);
 		INSERT_CAL(ah, &ah->tempCompCalData);
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "enabling Temperature Compensation Calibration.\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"enabling Temperature Compensation Calibration.\n");
 	}
 
 	/* Initialize current pointer to first element in list */
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index c4182359bee..4819747fa4c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -22,12 +22,14 @@
 #define COMP_CKSUM_LEN 2
 
 #define AR_CH0_TOP (0x00016288)
-#define AR_CH0_TOP_XPABIASLVL (0x3)
+#define AR_CH0_TOP_XPABIASLVL (0x300)
 #define AR_CH0_TOP_XPABIASLVL_S (8)
 
 #define AR_CH0_THERM (0x00016290)
-#define AR_CH0_THERM_SPARE (0x3f)
-#define AR_CH0_THERM_SPARE_S (0)
+#define AR_CH0_THERM_XPABIASLVL_MSB 0x3
+#define AR_CH0_THERM_XPABIASLVL_MSB_S 0
+#define AR_CH0_THERM_XPASHORT2GND 0x4
+#define AR_CH0_THERM_XPASHORT2GND_S 2
 
 #define AR_SWITCH_TABLE_COM_ALL (0xffff)
 #define AR_SWITCH_TABLE_COM_ALL_S (0)
@@ -55,6 +57,14 @@
 #define SUB_NUM_CTL_MODES_AT_5G_40 2    /* excluding HT40, EXT-OFDM */
 #define SUB_NUM_CTL_MODES_AT_2G_40 3    /* excluding HT40, EXT-OFDM, EXT-CCK */
 
+#define CTL(_tpower, _flag) ((_tpower) | ((_flag) << 6))
+
+#define EEPROM_DATA_LEN_9485	1088
+
+static int ar9003_hw_power_interpolate(int32_t x,
+				       int32_t *px, int32_t *py, u_int16_t np);
+
+
 static const struct ar9300_eeprom ar9300_default = {
 	.eepromVersion = 2,
 	.templateVersion = 2,
@@ -65,7 +75,7 @@ static const struct ar9300_eeprom ar9300_default = {
 		.regDmn = { LE16(0), LE16(0x1f) },
 		.txrxMask =  0x77, /* 4 bits tx and 4 bits rx */
 		.opCapFlags = {
-			.opFlags = AR9300_OPFLAGS_11G | AR9300_OPFLAGS_11A,
+			.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
 			.eepMisc = 0,
 		},
 		.rfSilent = 0,
@@ -144,13 +154,16 @@ static const struct ar9300_eeprom ar9300_default = {
 		.txEndToRxOn = 0x2,
 		.txFrameToXpaOn = 0xe,
 		.thresh62 = 28,
-		.papdRateMaskHt20 = LE32(0x80c080),
-		.papdRateMaskHt40 = LE32(0x80c080),
+		.papdRateMaskHt20 = LE32(0x0cf0e0e0),
+		.papdRateMaskHt40 = LE32(0x6cf0e0e0),
 		.futureModal = {
-			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 		},
 	 },
+	.base_ext1 = {
+		.ant_div_control = 0,
+		.future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+	},
 	.calFreqPier2G = {
 		FREQ2FBIN(2412, 1),
 		FREQ2FBIN(2437, 1),
@@ -285,25 +298,25 @@ static const struct ar9300_eeprom ar9300_default = {
 			/* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
 			/* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
 			/* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
-			/* Data[11].ctlEdges[3].bChannel */
-			FREQ2FBIN(2462, 1),
+			/* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
 		}
 	 },
 	.ctlPowerData_2G = {
-		 { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
-		 { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
-		 { { {60, 1}, {60, 0}, {60, 0}, {60, 1} } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
 
-		 { { {60, 1}, {60, 0}, {0, 0}, {0, 0} } },
-		 { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
-		 { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+		 { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 
-		 { { {60, 0}, {60, 1}, {60, 1}, {60, 0} } },
-		 { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
-		 { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
 
-		 { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
-		 { { {60, 0}, {60, 1}, {60, 1}, {60, 1} } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
 	 },
 	.modalHeader5G = {
 		/* 4 idle,t1,t2,b (4 bits per setting) */
@@ -343,13 +356,20 @@ static const struct ar9300_eeprom ar9300_default = {
 		.txEndToRxOn = 0x2,
 		.txFrameToXpaOn = 0xe,
 		.thresh62 = 28,
-		.papdRateMaskHt20 = LE32(0xf0e0e0),
-		.papdRateMaskHt40 = LE32(0xf0e0e0),
+		.papdRateMaskHt20 = LE32(0x0c80c080),
+		.papdRateMaskHt40 = LE32(0x0080c080),
 		.futureModal = {
-			0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-			0, 0, 0, 0, 0, 0, 0, 0
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
 		},
 	 },
+	.base_ext2 = {
+		.tempSlopeLow = 0,
+		.tempSlopeHigh = 0,
+		.xatten1DBLow = {0, 0, 0},
+		.xatten1MarginLow = {0, 0, 0},
+		.xatten1DBHigh = {0, 0, 0},
+		.xatten1MarginHigh = {0, 0, 0}
+	},
 	.calFreqPier5G = {
 		FREQ2FBIN(5180, 0),
 		FREQ2FBIN(5220, 0),
@@ -568,64 +588,2396 @@ static const struct ar9300_eeprom ar9300_default = {
 	.ctlPowerData_5G = {
 		{
 			{
-				{60, 1}, {60, 1}, {60, 1}, {60, 1},
-				{60, 1}, {60, 1}, {60, 1}, {60, 0},
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+			}
+		},
+		{
+			{
+				CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+				CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+				CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+			}
+		},
+	 }
+};
+
+static const struct ar9300_eeprom ar9300_x113 = {
+	.eepromVersion = 2,
+	.templateVersion = 6,
+	.macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0},
+	.custData = {"x113-023-f0000"},
+	.baseEepHeader = {
+		.regDmn = { LE16(0), LE16(0x1f) },
+		.txrxMask =  0x77, /* 4 bits tx and 4 bits rx */
+		.opCapFlags = {
+			.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
+			.eepMisc = 0,
+		},
+		.rfSilent = 0,
+		.blueToothOptions = 0,
+		.deviceCap = 0,
+		.deviceType = 5, /* takes lower byte in eeprom location */
+		.pwrTableOffset = AR9300_PWR_TABLE_OFFSET,
+		.params_for_tuning_caps = {0, 0},
+		.featureEnable = 0x0d,
+		 /*
+		  * bit0 - enable tx temp comp - disabled
+		  * bit1 - enable tx volt comp - disabled
+		  * bit2 - enable fastClock - enabled
+		  * bit3 - enable doubling - enabled
+		  * bit4 - enable internal regulator - disabled
+		  * bit5 - enable pa predistortion - disabled
+		  */
+		.miscConfiguration = 0, /* bit0 - turn down drivestrength */
+		.eepromWriteEnableGpio = 6,
+		.wlanDisableGpio = 0,
+		.wlanLedGpio = 8,
+		.rxBandSelectGpio = 0xff,
+		.txrxgain = 0x21,
+		.swreg = 0,
+	 },
+	.modalHeader2G = {
+	/* ar9300_modal_eep_header  2g */
+		/* 4 idle,t1,t2,b(4 bits per setting) */
+		.antCtrlCommon = LE32(0x110),
+		/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
+		.antCtrlCommon2 = LE32(0x44444),
+
+		/*
+		 * antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r,
+		 * rx1, rx12, b (2 bits each)
+		 */
+		.antCtrlChain = { LE16(0x150), LE16(0x150), LE16(0x150) },
+
+		/*
+		 * xatten1DB[AR9300_MAX_CHAINS];  3 xatten1_db
+		 * for ar9280 (0xa20c/b20c 5:0)
+		 */
+		.xatten1DB = {0, 0, 0},
+
+		/*
+		 * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
+		 * for ar9280 (0xa20c/b20c 16:12
+		 */
+		.xatten1Margin = {0, 0, 0},
+		.tempSlope = 25,
+		.voltSlope = 0,
+
+		/*
+		 * spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur
+		 * channels in usual fbin coding format
+		 */
+		.spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0},
+
+		/*
+		 * noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check
+		 * if the register is per chain
+		 */
+		.noiseFloorThreshCh = {-1, 0, 0},
+		.ob = {1, 1, 1},/* 3 chain */
+		.db_stage2 = {1, 1, 1}, /* 3 chain  */
+		.db_stage3 = {0, 0, 0},
+		.db_stage4 = {0, 0, 0},
+		.xpaBiasLvl = 0,
+		.txFrameToDataStart = 0x0e,
+		.txFrameToPaOn = 0x0e,
+		.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
+		.antennaGain = 0,
+		.switchSettling = 0x2c,
+		.adcDesiredSize = -30,
+		.txEndToXpaOff = 0,
+		.txEndToRxOn = 0x2,
+		.txFrameToXpaOn = 0xe,
+		.thresh62 = 28,
+		.papdRateMaskHt20 = LE32(0x0c80c080),
+		.papdRateMaskHt40 = LE32(0x0080c080),
+		.futureModal = {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		},
+	 },
+	 .base_ext1 = {
+		.ant_div_control = 0,
+		.future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+	 },
+	.calFreqPier2G = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1),
+	 },
+	/* ar9300_cal_data_per_freq_op_loop 2g */
+	.calPierData2G = {
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+	 },
+	.calTarget_freqbin_Cck = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2472, 1),
+	 },
+	.calTarget_freqbin_2G = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	 },
+	.calTarget_freqbin_2GHT20 = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	 },
+	.calTarget_freqbin_2GHT40 = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	 },
+	.calTargetPowerCck = {
+		 /* 1L-5L,5S,11L,11S */
+		 { {34, 34, 34, 34} },
+		 { {34, 34, 34, 34} },
+	},
+	.calTargetPower2G = {
+		 /* 6-24,36,48,54 */
+		 { {34, 34, 32, 32} },
+		 { {34, 34, 32, 32} },
+		 { {34, 34, 32, 32} },
+	},
+	.calTargetPower2GHT20 = {
+		{ {32, 32, 32, 32, 32, 28, 32, 32, 30, 28, 0, 0, 0, 0} },
+		{ {32, 32, 32, 32, 32, 28, 32, 32, 30, 28, 0, 0, 0, 0} },
+		{ {32, 32, 32, 32, 32, 28, 32, 32, 30, 28, 0, 0, 0, 0} },
+	},
+	.calTargetPower2GHT40 = {
+		{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
+		{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
+		{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
+	},
+	.ctlIndex_2G =  {
+		0x11, 0x12, 0x15, 0x17, 0x41, 0x42,
+		0x45, 0x47, 0x31, 0x32, 0x35, 0x37,
+	},
+	.ctl_freqbin_2G = {
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2457, 1),
+			FREQ2FBIN(2462, 1)
+		},
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2462, 1),
+			0xFF,
+		},
+
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2462, 1),
+			0xFF,
+		},
+		{
+			FREQ2FBIN(2422, 1),
+			FREQ2FBIN(2427, 1),
+			FREQ2FBIN(2447, 1),
+			FREQ2FBIN(2452, 1)
+		},
+
+		{
+			/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1),
+		},
+
+		{
+			/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			0,
+		},
+
+		{
+			/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2472, 1),
+			0,
+		},
+
+		{
+			/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
+			/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
+			/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
+			/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
+		},
+
+		{
+			/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+		},
+
+		{
+			/* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			0
+		},
+
+		{
+			/* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			0
+		},
+
+		{
+			/* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
+			/* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
+			/* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
+			/* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
+		}
+	 },
+	.ctlPowerData_2G = {
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
+
+		 { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+	 },
+	.modalHeader5G = {
+		/* 4 idle,t1,t2,b (4 bits per setting) */
+		.antCtrlCommon = LE32(0x220),
+		/* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */
+		.antCtrlCommon2 = LE32(0x11111),
+		 /* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */
+		.antCtrlChain = {
+			LE16(0x150), LE16(0x150), LE16(0x150),
+		},
+		 /* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */
+		.xatten1DB = {0, 0, 0},
+
+		/*
+		 * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
+		 * for merlin (0xa20c/b20c 16:12
+		 */
+		.xatten1Margin = {0, 0, 0},
+		.tempSlope = 68,
+		.voltSlope = 0,
+		/* spurChans spur channels in usual fbin coding format */
+		.spurChans = {FREQ2FBIN(5500, 0), 0, 0, 0, 0},
+		/* noiseFloorThreshCh Check if the register is per chain */
+		.noiseFloorThreshCh = {-1, 0, 0},
+		.ob = {3, 3, 3}, /* 3 chain */
+		.db_stage2 = {3, 3, 3}, /* 3 chain */
+		.db_stage3 = {3, 3, 3}, /* doesn't exist for 2G */
+		.db_stage4 = {3, 3, 3},	 /* don't exist for 2G */
+		.xpaBiasLvl = 0,
+		.txFrameToDataStart = 0x0e,
+		.txFrameToPaOn = 0x0e,
+		.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
+		.antennaGain = 0,
+		.switchSettling = 0x2d,
+		.adcDesiredSize = -30,
+		.txEndToXpaOff = 0,
+		.txEndToRxOn = 0x2,
+		.txFrameToXpaOn = 0xe,
+		.thresh62 = 28,
+		.papdRateMaskHt20 = LE32(0x0cf0e0e0),
+		.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+		.futureModal = {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		},
+	 },
+	.base_ext2 = {
+		.tempSlopeLow = 72,
+		.tempSlopeHigh = 105,
+		.xatten1DBLow = {0, 0, 0},
+		.xatten1MarginLow = {0, 0, 0},
+		.xatten1DBHigh = {0, 0, 0},
+		.xatten1MarginHigh = {0, 0, 0}
+	 },
+	.calFreqPier5G = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5240, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5600, 0),
+		FREQ2FBIN(5745, 0),
+		FREQ2FBIN(5785, 0)
+	},
+	.calPierData5G = {
+			{
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+			},
+			{
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+			},
+			{
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+			},
+
+	},
+	.calTarget_freqbin_5G = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5220, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5600, 0),
+		FREQ2FBIN(5745, 0),
+		FREQ2FBIN(5785, 0)
+	},
+	.calTarget_freqbin_5GHT20 = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5240, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5700, 0),
+		FREQ2FBIN(5745, 0),
+		FREQ2FBIN(5825, 0)
+	},
+	.calTarget_freqbin_5GHT40 = {
+		FREQ2FBIN(5190, 0),
+		FREQ2FBIN(5230, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5410, 0),
+		FREQ2FBIN(5510, 0),
+		FREQ2FBIN(5670, 0),
+		FREQ2FBIN(5755, 0),
+		FREQ2FBIN(5825, 0)
+	 },
+	.calTargetPower5G = {
+		/* 6-24,36,48,54 */
+		{ {42, 40, 40, 34} },
+		{ {42, 40, 40, 34} },
+		{ {42, 40, 40, 34} },
+		{ {42, 40, 40, 34} },
+		{ {42, 40, 40, 34} },
+		{ {42, 40, 40, 34} },
+		{ {42, 40, 40, 34} },
+		{ {42, 40, 40, 34} },
+	 },
+	.calTargetPower5GHT20 = {
+		/*
+		 * 0_8_16,1-3_9-11_17-19,
+		 * 4,5,6,7,12,13,14,15,20,21,22,23
+		 */
+		{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
+		{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
+		{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
+		{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
+		{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
+		{ {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} },
+		{ {38, 38, 38, 38, 32, 28, 38, 38, 32, 28, 38, 38, 32, 26} },
+		{ {36, 36, 36, 36, 32, 28, 36, 36, 32, 28, 36, 36, 32, 26} },
+	 },
+	.calTargetPower5GHT40 =  {
+		/*
+		 * 0_8_16,1-3_9-11_17-19,
+		 * 4,5,6,7,12,13,14,15,20,21,22,23
+		 */
+		{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
+		{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
+		{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
+		{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
+		{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
+		{ {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} },
+		{ {36, 36, 36, 36, 30, 26, 36, 36, 30, 26, 36, 36, 30, 24} },
+		{ {34, 34, 34, 34, 30, 26, 34, 34, 30, 26, 34, 34, 30, 24} },
+	 },
+	.ctlIndex_5G =  {
+		0x10, 0x16, 0x18, 0x40, 0x46,
+		0x48, 0x30, 0x36, 0x38
+	},
+	.ctl_freqbin_5G =  {
+		{
+			/* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
+			/* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0),
+			/* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+			/* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+		},
+		{
+			/* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
+			/* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0),
+			/* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+			/* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+		},
+
+		{
+			/* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+			/* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
+			/* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
+			/* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0),
+			/* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0),
+			/* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0),
+			/* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0),
+			/* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0)
+		},
+
+		{
+			/* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
+			/* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0),
+			/* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[3].ctlEdges[6].bChannel */ 0xFF,
+			/* Data[3].ctlEdges[7].bChannel */ 0xFF,
+		},
+
+		{
+			/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[4].ctlEdges[4].bChannel */ 0xFF,
+			/* Data[4].ctlEdges[5].bChannel */ 0xFF,
+			/* Data[4].ctlEdges[6].bChannel */ 0xFF,
+			/* Data[4].ctlEdges[7].bChannel */ 0xFF,
+		},
+
+		{
+			/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+			/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0),
+			/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0),
+			/* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
+			/* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0),
+			/* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
+			/* Data[5].ctlEdges[6].bChannel */ 0xFF,
+			/* Data[5].ctlEdges[7].bChannel */ 0xFF
+		},
+
+		{
+			/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
+			/* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0),
+			/* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0),
+			/* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0)
+		},
+
+		{
+			/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0),
+			/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0),
+			/* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+			/* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+		},
+
+		{
+			/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+			/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
+			/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
+			/* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
+			/* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0),
+			/* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
+			/* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0),
+			/* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0)
+		}
+	 },
+	.ctlPowerData_5G = {
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+			}
+		},
+		{
+			{
+				CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+				CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+				CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+			}
+		},
+	 }
+};
+
+
+static const struct ar9300_eeprom ar9300_h112 = {
+	.eepromVersion = 2,
+	.templateVersion = 3,
+	.macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0},
+	.custData = {"h112-241-f0000"},
+	.baseEepHeader = {
+		.regDmn = { LE16(0), LE16(0x1f) },
+		.txrxMask =  0x77, /* 4 bits tx and 4 bits rx */
+		.opCapFlags = {
+			.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
+			.eepMisc = 0,
+		},
+		.rfSilent = 0,
+		.blueToothOptions = 0,
+		.deviceCap = 0,
+		.deviceType = 5, /* takes lower byte in eeprom location */
+		.pwrTableOffset = AR9300_PWR_TABLE_OFFSET,
+		.params_for_tuning_caps = {0, 0},
+		.featureEnable = 0x0d,
+		/*
+		 * bit0 - enable tx temp comp - disabled
+		 * bit1 - enable tx volt comp - disabled
+		 * bit2 - enable fastClock - enabled
+		 * bit3 - enable doubling - enabled
+		 * bit4 - enable internal regulator - disabled
+		 * bit5 - enable pa predistortion - disabled
+		 */
+		.miscConfiguration = 0, /* bit0 - turn down drivestrength */
+		.eepromWriteEnableGpio = 6,
+		.wlanDisableGpio = 0,
+		.wlanLedGpio = 8,
+		.rxBandSelectGpio = 0xff,
+		.txrxgain = 0x10,
+		.swreg = 0,
+	},
+	.modalHeader2G = {
+		/* ar9300_modal_eep_header  2g */
+		/* 4 idle,t1,t2,b(4 bits per setting) */
+		.antCtrlCommon = LE32(0x110),
+		/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
+		.antCtrlCommon2 = LE32(0x44444),
+
+		/*
+		 * antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r,
+		 * rx1, rx12, b (2 bits each)
+		 */
+		.antCtrlChain = { LE16(0x150), LE16(0x150), LE16(0x150) },
+
+		/*
+		 * xatten1DB[AR9300_MAX_CHAINS];  3 xatten1_db
+		 * for ar9280 (0xa20c/b20c 5:0)
+		 */
+		.xatten1DB = {0, 0, 0},
+
+		/*
+		 * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
+		 * for ar9280 (0xa20c/b20c 16:12
+		 */
+		.xatten1Margin = {0, 0, 0},
+		.tempSlope = 25,
+		.voltSlope = 0,
+
+		/*
+		 * spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur
+		 * channels in usual fbin coding format
+		 */
+		.spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0},
+
+		/*
+		 * noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check
+		 * if the register is per chain
+		 */
+		.noiseFloorThreshCh = {-1, 0, 0},
+		.ob = {1, 1, 1},/* 3 chain */
+		.db_stage2 = {1, 1, 1}, /* 3 chain  */
+		.db_stage3 = {0, 0, 0},
+		.db_stage4 = {0, 0, 0},
+		.xpaBiasLvl = 0,
+		.txFrameToDataStart = 0x0e,
+		.txFrameToPaOn = 0x0e,
+		.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
+		.antennaGain = 0,
+		.switchSettling = 0x2c,
+		.adcDesiredSize = -30,
+		.txEndToXpaOff = 0,
+		.txEndToRxOn = 0x2,
+		.txFrameToXpaOn = 0xe,
+		.thresh62 = 28,
+		.papdRateMaskHt20 = LE32(0x80c080),
+		.papdRateMaskHt40 = LE32(0x80c080),
+		.futureModal = {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		},
+	},
+	.base_ext1 = {
+		.ant_div_control = 0,
+		.future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+	},
+	.calFreqPier2G = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1),
+	},
+	/* ar9300_cal_data_per_freq_op_loop 2g */
+	.calPierData2G = {
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+	},
+	.calTarget_freqbin_Cck = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2484, 1),
+	},
+	.calTarget_freqbin_2G = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	},
+	.calTarget_freqbin_2GHT20 = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	},
+	.calTarget_freqbin_2GHT40 = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	},
+	.calTargetPowerCck = {
+		/* 1L-5L,5S,11L,11S */
+		{ {34, 34, 34, 34} },
+		{ {34, 34, 34, 34} },
+	},
+	.calTargetPower2G = {
+		/* 6-24,36,48,54 */
+		{ {34, 34, 32, 32} },
+		{ {34, 34, 32, 32} },
+		{ {34, 34, 32, 32} },
+	},
+	.calTargetPower2GHT20 = {
+		{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 28, 28, 28, 24} },
+		{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 28, 28, 28, 24} },
+		{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 28, 28, 28, 24} },
+	},
+	.calTargetPower2GHT40 = {
+		{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 26, 26, 26, 22} },
+		{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 26, 26, 26, 22} },
+		{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 26, 26, 26, 22} },
+	},
+	.ctlIndex_2G =  {
+		0x11, 0x12, 0x15, 0x17, 0x41, 0x42,
+		0x45, 0x47, 0x31, 0x32, 0x35, 0x37,
+	},
+	.ctl_freqbin_2G = {
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2457, 1),
+			FREQ2FBIN(2462, 1)
+		},
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2462, 1),
+			0xFF,
+		},
+
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2462, 1),
+			0xFF,
+		},
+		{
+			FREQ2FBIN(2422, 1),
+			FREQ2FBIN(2427, 1),
+			FREQ2FBIN(2447, 1),
+			FREQ2FBIN(2452, 1)
+		},
+
+		{
+			/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1),
+		},
+
+		{
+			/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			0,
+		},
+
+		{
+			/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2472, 1),
+			0,
+		},
+
+		{
+			/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
+			/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
+			/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
+			/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
+		},
+
+		{
+			/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+		},
+
+		{
+			/* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			0
+		},
+
+		{
+			/* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			0
+		},
+
+		{
+			/* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
+			/* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
+			/* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
+			/* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
+		}
+	},
+	.ctlPowerData_2G = {
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
+
+		{ { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+	},
+	.modalHeader5G = {
+		/* 4 idle,t1,t2,b (4 bits per setting) */
+		.antCtrlCommon = LE32(0x220),
+		/* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */
+		.antCtrlCommon2 = LE32(0x44444),
+		/* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */
+		.antCtrlChain = {
+			LE16(0x150), LE16(0x150), LE16(0x150),
+		},
+		/* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */
+		.xatten1DB = {0, 0, 0},
+
+		/*
+		 * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
+		 * for merlin (0xa20c/b20c 16:12
+		 */
+		.xatten1Margin = {0, 0, 0},
+		.tempSlope = 45,
+		.voltSlope = 0,
+		/* spurChans spur channels in usual fbin coding format */
+		.spurChans = {0, 0, 0, 0, 0},
+		/* noiseFloorThreshCh Check if the register is per chain */
+		.noiseFloorThreshCh = {-1, 0, 0},
+		.ob = {3, 3, 3}, /* 3 chain */
+		.db_stage2 = {3, 3, 3}, /* 3 chain */
+		.db_stage3 = {3, 3, 3}, /* doesn't exist for 2G */
+		.db_stage4 = {3, 3, 3},	 /* don't exist for 2G */
+		.xpaBiasLvl = 0,
+		.txFrameToDataStart = 0x0e,
+		.txFrameToPaOn = 0x0e,
+		.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
+		.antennaGain = 0,
+		.switchSettling = 0x2d,
+		.adcDesiredSize = -30,
+		.txEndToXpaOff = 0,
+		.txEndToRxOn = 0x2,
+		.txFrameToXpaOn = 0xe,
+		.thresh62 = 28,
+		.papdRateMaskHt20 = LE32(0x0cf0e0e0),
+		.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+		.futureModal = {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		},
+	},
+	.base_ext2 = {
+		.tempSlopeLow = 40,
+		.tempSlopeHigh = 50,
+		.xatten1DBLow = {0, 0, 0},
+		.xatten1MarginLow = {0, 0, 0},
+		.xatten1DBHigh = {0, 0, 0},
+		.xatten1MarginHigh = {0, 0, 0}
+	},
+	.calFreqPier5G = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5220, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5600, 0),
+		FREQ2FBIN(5700, 0),
+		FREQ2FBIN(5825, 0)
+	},
+	.calPierData5G = {
+		{
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+		},
+		{
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+		},
+		{
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+		},
+
+	},
+	.calTarget_freqbin_5G = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5240, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5600, 0),
+		FREQ2FBIN(5700, 0),
+		FREQ2FBIN(5825, 0)
+	},
+	.calTarget_freqbin_5GHT20 = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5240, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5700, 0),
+		FREQ2FBIN(5745, 0),
+		FREQ2FBIN(5825, 0)
+	},
+	.calTarget_freqbin_5GHT40 = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5240, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5700, 0),
+		FREQ2FBIN(5745, 0),
+		FREQ2FBIN(5825, 0)
+	},
+	.calTargetPower5G = {
+		/* 6-24,36,48,54 */
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+	},
+	.calTargetPower5GHT20 = {
+		/*
+		 * 0_8_16,1-3_9-11_17-19,
+		 * 4,5,6,7,12,13,14,15,20,21,22,23
+		 */
+		{ {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 20, 20, 20, 16} },
+		{ {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 20, 20, 20, 16} },
+		{ {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 18, 18, 18, 16} },
+		{ {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 18, 18, 18, 16} },
+		{ {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 16, 16, 16, 14} },
+		{ {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 16, 16, 16, 14} },
+		{ {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 14, 14, 14, 12} },
+		{ {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 14, 14, 14, 12} },
+	},
+	.calTargetPower5GHT40 =  {
+		/*
+		 * 0_8_16,1-3_9-11_17-19,
+		 * 4,5,6,7,12,13,14,15,20,21,22,23
+		 */
+		{ {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 18, 18, 18, 14} },
+		{ {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 18, 18, 18, 14} },
+		{ {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 16, 16, 16, 12} },
+		{ {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 16, 16, 16, 12} },
+		{ {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 14, 14, 14, 10} },
+		{ {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 14, 14, 14, 10} },
+		{ {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 12, 12, 12, 8} },
+		{ {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 12, 12, 12, 8} },
+	},
+	.ctlIndex_5G =  {
+		0x10, 0x16, 0x18, 0x40, 0x46,
+		0x48, 0x30, 0x36, 0x38
+	},
+	.ctl_freqbin_5G =  {
+		{
+			/* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
+			/* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0),
+			/* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+			/* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+		},
+		{
+			/* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
+			/* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0),
+			/* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+			/* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+		},
+
+		{
+			/* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+			/* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
+			/* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
+			/* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0),
+			/* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0),
+			/* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0),
+			/* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0),
+			/* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0)
+		},
+
+		{
+			/* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
+			/* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0),
+			/* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[3].ctlEdges[6].bChannel */ 0xFF,
+			/* Data[3].ctlEdges[7].bChannel */ 0xFF,
+		},
+
+		{
+			/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[4].ctlEdges[4].bChannel */ 0xFF,
+			/* Data[4].ctlEdges[5].bChannel */ 0xFF,
+			/* Data[4].ctlEdges[6].bChannel */ 0xFF,
+			/* Data[4].ctlEdges[7].bChannel */ 0xFF,
+		},
+
+		{
+			/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+			/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0),
+			/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0),
+			/* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
+			/* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0),
+			/* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
+			/* Data[5].ctlEdges[6].bChannel */ 0xFF,
+			/* Data[5].ctlEdges[7].bChannel */ 0xFF
+		},
+
+		{
+			/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
+			/* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0),
+			/* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0),
+			/* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0)
+		},
+
+		{
+			/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0),
+			/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0),
+			/* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+			/* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+		},
+
+		{
+			/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+			/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
+			/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
+			/* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
+			/* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0),
+			/* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
+			/* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0),
+			/* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0)
+		}
+	},
+	.ctlPowerData_5G = {
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+			}
+		},
+		{
+			{
+				CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+				CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+				CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+			}
+		},
+	}
+};
+
+
+static const struct ar9300_eeprom ar9300_x112 = {
+	.eepromVersion = 2,
+	.templateVersion = 5,
+	.macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0},
+	.custData = {"x112-041-f0000"},
+	.baseEepHeader = {
+		.regDmn = { LE16(0), LE16(0x1f) },
+		.txrxMask =  0x77, /* 4 bits tx and 4 bits rx */
+		.opCapFlags = {
+			.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
+			.eepMisc = 0,
+		},
+		.rfSilent = 0,
+		.blueToothOptions = 0,
+		.deviceCap = 0,
+		.deviceType = 5, /* takes lower byte in eeprom location */
+		.pwrTableOffset = AR9300_PWR_TABLE_OFFSET,
+		.params_for_tuning_caps = {0, 0},
+		.featureEnable = 0x0d,
+		/*
+		 * bit0 - enable tx temp comp - disabled
+		 * bit1 - enable tx volt comp - disabled
+		 * bit2 - enable fastclock - enabled
+		 * bit3 - enable doubling - enabled
+		 * bit4 - enable internal regulator - disabled
+		 * bit5 - enable pa predistortion - disabled
+		 */
+		.miscConfiguration = 0, /* bit0 - turn down drivestrength */
+		.eepromWriteEnableGpio = 6,
+		.wlanDisableGpio = 0,
+		.wlanLedGpio = 8,
+		.rxBandSelectGpio = 0xff,
+		.txrxgain = 0x0,
+		.swreg = 0,
+	},
+	.modalHeader2G = {
+		/* ar9300_modal_eep_header  2g */
+		/* 4 idle,t1,t2,b(4 bits per setting) */
+		.antCtrlCommon = LE32(0x110),
+		/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
+		.antCtrlCommon2 = LE32(0x22222),
+
+		/*
+		 * antCtrlChain[ar9300_max_chains]; 6 idle, t, r,
+		 * rx1, rx12, b (2 bits each)
+		 */
+		.antCtrlChain = { LE16(0x10), LE16(0x10), LE16(0x10) },
+
+		/*
+		 * xatten1DB[AR9300_max_chains];  3 xatten1_db
+		 * for ar9280 (0xa20c/b20c 5:0)
+		 */
+		.xatten1DB = {0x1b, 0x1b, 0x1b},
+
+		/*
+		 * xatten1Margin[ar9300_max_chains]; 3 xatten1_margin
+		 * for ar9280 (0xa20c/b20c 16:12
+		 */
+		.xatten1Margin = {0x15, 0x15, 0x15},
+		.tempSlope = 50,
+		.voltSlope = 0,
+
+		/*
+		 * spurChans[OSPrey_eeprom_modal_sPURS]; spur
+		 * channels in usual fbin coding format
+		 */
+		.spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0},
+
+		/*
+		 * noiseFloorThreshch[ar9300_max_cHAINS]; 3 Check
+		 * if the register is per chain
+		 */
+		.noiseFloorThreshCh = {-1, 0, 0},
+		.ob = {1, 1, 1},/* 3 chain */
+		.db_stage2 = {1, 1, 1}, /* 3 chain  */
+		.db_stage3 = {0, 0, 0},
+		.db_stage4 = {0, 0, 0},
+		.xpaBiasLvl = 0,
+		.txFrameToDataStart = 0x0e,
+		.txFrameToPaOn = 0x0e,
+		.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
+		.antennaGain = 0,
+		.switchSettling = 0x2c,
+		.adcDesiredSize = -30,
+		.txEndToXpaOff = 0,
+		.txEndToRxOn = 0x2,
+		.txFrameToXpaOn = 0xe,
+		.thresh62 = 28,
+		.papdRateMaskHt20 = LE32(0x0c80c080),
+		.papdRateMaskHt40 = LE32(0x0080c080),
+		.futureModal = {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		},
+	},
+	.base_ext1 = {
+		.ant_div_control = 0,
+		.future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+	},
+	.calFreqPier2G = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1),
+	},
+	/* ar9300_cal_data_per_freq_op_loop 2g */
+	.calPierData2G = {
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+	},
+	.calTarget_freqbin_Cck = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2472, 1),
+	},
+	.calTarget_freqbin_2G = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	},
+	.calTarget_freqbin_2GHT20 = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	},
+	.calTarget_freqbin_2GHT40 = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	},
+	.calTargetPowerCck = {
+		/* 1L-5L,5S,11L,11s */
+		{ {38, 38, 38, 38} },
+		{ {38, 38, 38, 38} },
+	},
+	.calTargetPower2G = {
+		/* 6-24,36,48,54 */
+		{ {38, 38, 36, 34} },
+		{ {38, 38, 36, 34} },
+		{ {38, 38, 34, 32} },
+	},
+	.calTargetPower2GHT20 = {
+		{ {36, 36, 36, 36, 36, 34, 34, 32, 30, 28, 28, 28, 28, 26} },
+		{ {36, 36, 36, 36, 36, 34, 36, 34, 32, 30, 30, 30, 28, 26} },
+		{ {36, 36, 36, 36, 36, 34, 34, 32, 30, 28, 28, 28, 28, 26} },
+	},
+	.calTargetPower2GHT40 = {
+		{ {36, 36, 36, 36, 34, 32, 32, 30, 28, 26, 26, 26, 26, 24} },
+		{ {36, 36, 36, 36, 34, 32, 34, 32, 30, 28, 28, 28, 28, 24} },
+		{ {36, 36, 36, 36, 34, 32, 32, 30, 28, 26, 26, 26, 26, 24} },
+	},
+	.ctlIndex_2G =  {
+		0x11, 0x12, 0x15, 0x17, 0x41, 0x42,
+		0x45, 0x47, 0x31, 0x32, 0x35, 0x37,
+	},
+	.ctl_freqbin_2G = {
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2457, 1),
+			FREQ2FBIN(2462, 1)
+		},
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2462, 1),
+			0xFF,
+		},
+
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2462, 1),
+			0xFF,
+		},
+		{
+			FREQ2FBIN(2422, 1),
+			FREQ2FBIN(2427, 1),
+			FREQ2FBIN(2447, 1),
+			FREQ2FBIN(2452, 1)
+		},
+
+		{
+			/* Data[4].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
+			/* Data[4].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
+			/* Data[4].ctledges[2].bchannel */ FREQ2FBIN(2472, 1),
+			/* Data[4].ctledges[3].bchannel */ FREQ2FBIN(2484, 1),
+		},
+
+		{
+			/* Data[5].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
+			/* Data[5].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
+			/* Data[5].ctledges[2].bchannel */ FREQ2FBIN(2472, 1),
+			0,
+		},
+
+		{
+			/* Data[6].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
+			/* Data[6].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2472, 1),
+			0,
+		},
+
+		{
+			/* Data[7].ctledges[0].bchannel */ FREQ2FBIN(2422, 1),
+			/* Data[7].ctledges[1].bchannel */ FREQ2FBIN(2427, 1),
+			/* Data[7].ctledges[2].bchannel */ FREQ2FBIN(2447, 1),
+			/* Data[7].ctledges[3].bchannel */ FREQ2FBIN(2462, 1),
+		},
+
+		{
+			/* Data[8].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
+			/* Data[8].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
+			/* Data[8].ctledges[2].bchannel */ FREQ2FBIN(2472, 1),
+		},
+
+		{
+			/* Data[9].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
+			/* Data[9].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
+			/* Data[9].ctledges[2].bchannel */ FREQ2FBIN(2472, 1),
+			0
+		},
+
+		{
+			/* Data[10].ctledges[0].bchannel */ FREQ2FBIN(2412, 1),
+			/* Data[10].ctledges[1].bchannel */ FREQ2FBIN(2417, 1),
+			/* Data[10].ctledges[2].bchannel */ FREQ2FBIN(2472, 1),
+			0
+		},
+
+		{
+			/* Data[11].ctledges[0].bchannel */ FREQ2FBIN(2422, 1),
+			/* Data[11].ctledges[1].bchannel */ FREQ2FBIN(2427, 1),
+			/* Data[11].ctledges[2].bchannel */ FREQ2FBIN(2447, 1),
+			/* Data[11].ctledges[3].bchannel */ FREQ2FBIN(2462, 1),
+		}
+	},
+	.ctlPowerData_2G = {
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		{ { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
+
+		{ { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+		{ { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+	},
+	.modalHeader5G = {
+		/* 4 idle,t1,t2,b (4 bits per setting) */
+		.antCtrlCommon = LE32(0x110),
+		/* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */
+		.antCtrlCommon2 = LE32(0x22222),
+		/* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */
+		.antCtrlChain = {
+			LE16(0x0), LE16(0x0), LE16(0x0),
+		},
+		/* xatten1DB 3 xatten1_db for ar9280 (0xa20c/b20c 5:0) */
+		.xatten1DB = {0x13, 0x19, 0x17},
+
+		/*
+		 * xatten1Margin[ar9300_max_chains]; 3 xatten1_margin
+		 * for merlin (0xa20c/b20c 16:12
+		 */
+		.xatten1Margin = {0x19, 0x19, 0x19},
+		.tempSlope = 70,
+		.voltSlope = 15,
+		/* spurChans spur channels in usual fbin coding format */
+		.spurChans = {0, 0, 0, 0, 0},
+		/* noiseFloorThreshch check if the register is per chain */
+		.noiseFloorThreshCh = {-1, 0, 0},
+		.ob = {3, 3, 3}, /* 3 chain */
+		.db_stage2 = {3, 3, 3}, /* 3 chain */
+		.db_stage3 = {3, 3, 3}, /* doesn't exist for 2G */
+		.db_stage4 = {3, 3, 3},	 /* don't exist for 2G */
+		.xpaBiasLvl = 0,
+		.txFrameToDataStart = 0x0e,
+		.txFrameToPaOn = 0x0e,
+		.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
+		.antennaGain = 0,
+		.switchSettling = 0x2d,
+		.adcDesiredSize = -30,
+		.txEndToXpaOff = 0,
+		.txEndToRxOn = 0x2,
+		.txFrameToXpaOn = 0xe,
+		.thresh62 = 28,
+		.papdRateMaskHt20 = LE32(0x0cf0e0e0),
+		.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+		.futureModal = {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		},
+	},
+	.base_ext2 = {
+		.tempSlopeLow = 72,
+		.tempSlopeHigh = 105,
+		.xatten1DBLow = {0x10, 0x14, 0x10},
+		.xatten1MarginLow = {0x19, 0x19 , 0x19},
+		.xatten1DBHigh = {0x1d, 0x20, 0x24},
+		.xatten1MarginHigh = {0x10, 0x10, 0x10}
+	},
+	.calFreqPier5G = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5220, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5600, 0),
+		FREQ2FBIN(5700, 0),
+		FREQ2FBIN(5785, 0)
+	},
+	.calPierData5G = {
+		{
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+		},
+		{
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+		},
+		{
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+			{0, 0, 0, 0, 0},
+		},
+
+	},
+	.calTarget_freqbin_5G = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5220, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5600, 0),
+		FREQ2FBIN(5725, 0),
+		FREQ2FBIN(5825, 0)
+	},
+	.calTarget_freqbin_5GHT20 = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5220, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5600, 0),
+		FREQ2FBIN(5725, 0),
+		FREQ2FBIN(5825, 0)
+	},
+	.calTarget_freqbin_5GHT40 = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5220, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5600, 0),
+		FREQ2FBIN(5725, 0),
+		FREQ2FBIN(5825, 0)
+	},
+	.calTargetPower5G = {
+		/* 6-24,36,48,54 */
+		{ {32, 32, 28, 26} },
+		{ {32, 32, 28, 26} },
+		{ {32, 32, 28, 26} },
+		{ {32, 32, 26, 24} },
+		{ {32, 32, 26, 24} },
+		{ {32, 32, 24, 22} },
+		{ {30, 30, 24, 22} },
+		{ {30, 30, 24, 22} },
+	},
+	.calTargetPower5GHT20 = {
+		/*
+		 * 0_8_16,1-3_9-11_17-19,
+		 * 4,5,6,7,12,13,14,15,20,21,22,23
+		 */
+		{ {32, 32, 32, 32, 28, 26, 32, 28, 26, 24, 24, 24, 22, 22} },
+		{ {32, 32, 32, 32, 28, 26, 32, 28, 26, 24, 24, 24, 22, 22} },
+		{ {32, 32, 32, 32, 28, 26, 32, 28, 26, 24, 24, 24, 22, 22} },
+		{ {32, 32, 32, 32, 28, 26, 32, 26, 24, 22, 22, 22, 20, 20} },
+		{ {32, 32, 32, 32, 28, 26, 32, 26, 24, 22, 20, 18, 16, 16} },
+		{ {32, 32, 32, 32, 28, 26, 32, 24, 20, 16, 18, 16, 14, 14} },
+		{ {30, 30, 30, 30, 28, 26, 30, 24, 20, 16, 18, 16, 14, 14} },
+		{ {30, 30, 30, 30, 28, 26, 30, 24, 20, 16, 18, 16, 14, 14} },
+	},
+	.calTargetPower5GHT40 =  {
+		/*
+		 * 0_8_16,1-3_9-11_17-19,
+		 * 4,5,6,7,12,13,14,15,20,21,22,23
+		 */
+		{ {32, 32, 32, 30, 28, 26, 30, 28, 26, 24, 24, 24, 22, 22} },
+		{ {32, 32, 32, 30, 28, 26, 30, 28, 26, 24, 24, 24, 22, 22} },
+		{ {32, 32, 32, 30, 28, 26, 30, 28, 26, 24, 24, 24, 22, 22} },
+		{ {32, 32, 32, 30, 28, 26, 30, 26, 24, 22, 22, 22, 20, 20} },
+		{ {32, 32, 32, 30, 28, 26, 30, 26, 24, 22, 20, 18, 16, 16} },
+		{ {32, 32, 32, 30, 28, 26, 30, 22, 20, 16, 18, 16, 14, 14} },
+		{ {30, 30, 30, 30, 28, 26, 30, 22, 20, 16, 18, 16, 14, 14} },
+		{ {30, 30, 30, 30, 28, 26, 30, 22, 20, 16, 18, 16, 14, 14} },
+	},
+	.ctlIndex_5G =  {
+		0x10, 0x16, 0x18, 0x40, 0x46,
+		0x48, 0x30, 0x36, 0x38
+	},
+	.ctl_freqbin_5G =  {
+		{
+			/* Data[0].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
+			/* Data[0].ctledges[1].bchannel */ FREQ2FBIN(5260, 0),
+			/* Data[0].ctledges[2].bchannel */ FREQ2FBIN(5280, 0),
+			/* Data[0].ctledges[3].bchannel */ FREQ2FBIN(5500, 0),
+			/* Data[0].ctledges[4].bchannel */ FREQ2FBIN(5600, 0),
+			/* Data[0].ctledges[5].bchannel */ FREQ2FBIN(5700, 0),
+			/* Data[0].ctledges[6].bchannel */ FREQ2FBIN(5745, 0),
+			/* Data[0].ctledges[7].bchannel */ FREQ2FBIN(5825, 0)
+		},
+		{
+			/* Data[1].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
+			/* Data[1].ctledges[1].bchannel */ FREQ2FBIN(5260, 0),
+			/* Data[1].ctledges[2].bchannel */ FREQ2FBIN(5280, 0),
+			/* Data[1].ctledges[3].bchannel */ FREQ2FBIN(5500, 0),
+			/* Data[1].ctledges[4].bchannel */ FREQ2FBIN(5520, 0),
+			/* Data[1].ctledges[5].bchannel */ FREQ2FBIN(5700, 0),
+			/* Data[1].ctledges[6].bchannel */ FREQ2FBIN(5745, 0),
+			/* Data[1].ctledges[7].bchannel */ FREQ2FBIN(5825, 0)
+		},
+
+		{
+			/* Data[2].ctledges[0].bchannel */ FREQ2FBIN(5190, 0),
+			/* Data[2].ctledges[1].bchannel */ FREQ2FBIN(5230, 0),
+			/* Data[2].ctledges[2].bchannel */ FREQ2FBIN(5270, 0),
+			/* Data[2].ctledges[3].bchannel */ FREQ2FBIN(5310, 0),
+			/* Data[2].ctledges[4].bchannel */ FREQ2FBIN(5510, 0),
+			/* Data[2].ctledges[5].bchannel */ FREQ2FBIN(5550, 0),
+			/* Data[2].ctledges[6].bchannel */ FREQ2FBIN(5670, 0),
+			/* Data[2].ctledges[7].bchannel */ FREQ2FBIN(5755, 0)
+		},
+
+		{
+			/* Data[3].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
+			/* Data[3].ctledges[1].bchannel */ FREQ2FBIN(5200, 0),
+			/* Data[3].ctledges[2].bchannel */ FREQ2FBIN(5260, 0),
+			/* Data[3].ctledges[3].bchannel */ FREQ2FBIN(5320, 0),
+			/* Data[3].ctledges[4].bchannel */ FREQ2FBIN(5500, 0),
+			/* Data[3].ctledges[5].bchannel */ FREQ2FBIN(5700, 0),
+			/* Data[3].ctledges[6].bchannel */ 0xFF,
+			/* Data[3].ctledges[7].bchannel */ 0xFF,
+		},
+
+		{
+			/* Data[4].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
+			/* Data[4].ctledges[1].bchannel */ FREQ2FBIN(5260, 0),
+			/* Data[4].ctledges[2].bchannel */ FREQ2FBIN(5500, 0),
+			/* Data[4].ctledges[3].bchannel */ FREQ2FBIN(5700, 0),
+			/* Data[4].ctledges[4].bchannel */ 0xFF,
+			/* Data[4].ctledges[5].bchannel */ 0xFF,
+			/* Data[4].ctledges[6].bchannel */ 0xFF,
+			/* Data[4].ctledges[7].bchannel */ 0xFF,
+		},
+
+		{
+			/* Data[5].ctledges[0].bchannel */ FREQ2FBIN(5190, 0),
+			/* Data[5].ctledges[1].bchannel */ FREQ2FBIN(5270, 0),
+			/* Data[5].ctledges[2].bchannel */ FREQ2FBIN(5310, 0),
+			/* Data[5].ctledges[3].bchannel */ FREQ2FBIN(5510, 0),
+			/* Data[5].ctledges[4].bchannel */ FREQ2FBIN(5590, 0),
+			/* Data[5].ctledges[5].bchannel */ FREQ2FBIN(5670, 0),
+			/* Data[5].ctledges[6].bchannel */ 0xFF,
+			/* Data[5].ctledges[7].bchannel */ 0xFF
+		},
+
+		{
+			/* Data[6].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
+			/* Data[6].ctledges[1].bchannel */ FREQ2FBIN(5200, 0),
+			/* Data[6].ctledges[2].bchannel */ FREQ2FBIN(5220, 0),
+			/* Data[6].ctledges[3].bchannel */ FREQ2FBIN(5260, 0),
+			/* Data[6].ctledges[4].bchannel */ FREQ2FBIN(5500, 0),
+			/* Data[6].ctledges[5].bchannel */ FREQ2FBIN(5600, 0),
+			/* Data[6].ctledges[6].bchannel */ FREQ2FBIN(5700, 0),
+			/* Data[6].ctledges[7].bchannel */ FREQ2FBIN(5745, 0)
+		},
+
+		{
+			/* Data[7].ctledges[0].bchannel */ FREQ2FBIN(5180, 0),
+			/* Data[7].ctledges[1].bchannel */ FREQ2FBIN(5260, 0),
+			/* Data[7].ctledges[2].bchannel */ FREQ2FBIN(5320, 0),
+			/* Data[7].ctledges[3].bchannel */ FREQ2FBIN(5500, 0),
+			/* Data[7].ctledges[4].bchannel */ FREQ2FBIN(5560, 0),
+			/* Data[7].ctledges[5].bchannel */ FREQ2FBIN(5700, 0),
+			/* Data[7].ctledges[6].bchannel */ FREQ2FBIN(5745, 0),
+			/* Data[7].ctledges[7].bchannel */ FREQ2FBIN(5825, 0)
+		},
+
+		{
+			/* Data[8].ctledges[0].bchannel */ FREQ2FBIN(5190, 0),
+			/* Data[8].ctledges[1].bchannel */ FREQ2FBIN(5230, 0),
+			/* Data[8].ctledges[2].bchannel */ FREQ2FBIN(5270, 0),
+			/* Data[8].ctledges[3].bchannel */ FREQ2FBIN(5510, 0),
+			/* Data[8].ctledges[4].bchannel */ FREQ2FBIN(5550, 0),
+			/* Data[8].ctledges[5].bchannel */ FREQ2FBIN(5670, 0),
+			/* Data[8].ctledges[6].bchannel */ FREQ2FBIN(5755, 0),
+			/* Data[8].ctledges[7].bchannel */ FREQ2FBIN(5795, 0)
+		}
+	},
+	.ctlPowerData_5G = {
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+			}
+		},
+		{
+			{
+				CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+				CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+				CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+			}
+		},
+		{
+			{
+				CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+			}
+		},
+	}
+};
+
+static const struct ar9300_eeprom ar9300_h116 = {
+	.eepromVersion = 2,
+	.templateVersion = 4,
+	.macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0},
+	.custData = {"h116-041-f0000"},
+	.baseEepHeader = {
+		.regDmn = { LE16(0), LE16(0x1f) },
+		.txrxMask =  0x33, /* 4 bits tx and 4 bits rx */
+		.opCapFlags = {
+			.opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A,
+			.eepMisc = 0,
+		},
+		.rfSilent = 0,
+		.blueToothOptions = 0,
+		.deviceCap = 0,
+		.deviceType = 5, /* takes lower byte in eeprom location */
+		.pwrTableOffset = AR9300_PWR_TABLE_OFFSET,
+		.params_for_tuning_caps = {0, 0},
+		.featureEnable = 0x0d,
+		 /*
+		  * bit0 - enable tx temp comp - disabled
+		  * bit1 - enable tx volt comp - disabled
+		  * bit2 - enable fastClock - enabled
+		  * bit3 - enable doubling - enabled
+		  * bit4 - enable internal regulator - disabled
+		  * bit5 - enable pa predistortion - disabled
+		  */
+		.miscConfiguration = 0, /* bit0 - turn down drivestrength */
+		.eepromWriteEnableGpio = 6,
+		.wlanDisableGpio = 0,
+		.wlanLedGpio = 8,
+		.rxBandSelectGpio = 0xff,
+		.txrxgain = 0x10,
+		.swreg = 0,
+	 },
+	.modalHeader2G = {
+	/* ar9300_modal_eep_header  2g */
+		/* 4 idle,t1,t2,b(4 bits per setting) */
+		.antCtrlCommon = LE32(0x110),
+		/* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */
+		.antCtrlCommon2 = LE32(0x44444),
+
+		/*
+		 * antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r,
+		 * rx1, rx12, b (2 bits each)
+		 */
+		.antCtrlChain = { LE16(0x10), LE16(0x10), LE16(0x10) },
+
+		/*
+		 * xatten1DB[AR9300_MAX_CHAINS];  3 xatten1_db
+		 * for ar9280 (0xa20c/b20c 5:0)
+		 */
+		.xatten1DB = {0x1f, 0x1f, 0x1f},
+
+		/*
+		 * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
+		 * for ar9280 (0xa20c/b20c 16:12
+		 */
+		.xatten1Margin = {0x12, 0x12, 0x12},
+		.tempSlope = 25,
+		.voltSlope = 0,
+
+		/*
+		 * spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur
+		 * channels in usual fbin coding format
+		 */
+		.spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0},
+
+		/*
+		 * noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check
+		 * if the register is per chain
+		 */
+		.noiseFloorThreshCh = {-1, 0, 0},
+		.ob = {1, 1, 1},/* 3 chain */
+		.db_stage2 = {1, 1, 1}, /* 3 chain  */
+		.db_stage3 = {0, 0, 0},
+		.db_stage4 = {0, 0, 0},
+		.xpaBiasLvl = 0,
+		.txFrameToDataStart = 0x0e,
+		.txFrameToPaOn = 0x0e,
+		.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
+		.antennaGain = 0,
+		.switchSettling = 0x2c,
+		.adcDesiredSize = -30,
+		.txEndToXpaOff = 0,
+		.txEndToRxOn = 0x2,
+		.txFrameToXpaOn = 0xe,
+		.thresh62 = 28,
+		.papdRateMaskHt20 = LE32(0x0c80C080),
+		.papdRateMaskHt40 = LE32(0x0080C080),
+		.futureModal = {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		},
+	 },
+	 .base_ext1 = {
+		.ant_div_control = 0,
+		.future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}
+	 },
+	.calFreqPier2G = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1),
+	 },
+	/* ar9300_cal_data_per_freq_op_loop 2g */
+	.calPierData2G = {
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+		{ {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} },
+	 },
+	.calTarget_freqbin_Cck = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2472, 1),
+	 },
+	.calTarget_freqbin_2G = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	 },
+	.calTarget_freqbin_2GHT20 = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	 },
+	.calTarget_freqbin_2GHT40 = {
+		FREQ2FBIN(2412, 1),
+		FREQ2FBIN(2437, 1),
+		FREQ2FBIN(2472, 1)
+	 },
+	.calTargetPowerCck = {
+		 /* 1L-5L,5S,11L,11S */
+		 { {34, 34, 34, 34} },
+		 { {34, 34, 34, 34} },
+	},
+	.calTargetPower2G = {
+		 /* 6-24,36,48,54 */
+		 { {34, 34, 32, 32} },
+		 { {34, 34, 32, 32} },
+		 { {34, 34, 32, 32} },
+	},
+	.calTargetPower2GHT20 = {
+		{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 0, 0, 0, 0} },
+		{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 0, 0, 0, 0} },
+		{ {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 0, 0, 0, 0} },
+	},
+	.calTargetPower2GHT40 = {
+		{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
+		{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
+		{ {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} },
+	},
+	.ctlIndex_2G =  {
+		0x11, 0x12, 0x15, 0x17, 0x41, 0x42,
+		0x45, 0x47, 0x31, 0x32, 0x35, 0x37,
+	},
+	.ctl_freqbin_2G = {
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2457, 1),
+			FREQ2FBIN(2462, 1)
+		},
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2462, 1),
+			0xFF,
+		},
+
+		{
+			FREQ2FBIN(2412, 1),
+			FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2462, 1),
+			0xFF,
+		},
+		{
+			FREQ2FBIN(2422, 1),
+			FREQ2FBIN(2427, 1),
+			FREQ2FBIN(2447, 1),
+			FREQ2FBIN(2452, 1)
+		},
+
+		{
+			/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1),
+		},
+
+		{
+			/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			0,
+		},
+
+		{
+			/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			FREQ2FBIN(2472, 1),
+			0,
+		},
+
+		{
+			/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
+			/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
+			/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
+			/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
+		},
+
+		{
+			/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+		},
+
+		{
+			/* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			0
+		},
+
+		{
+			/* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1),
+			/* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1),
+			/* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1),
+			0
+		},
+
+		{
+			/* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1),
+			/* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1),
+			/* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1),
+			/* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1),
+		}
+	 },
+	.ctlPowerData_2G = {
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
+
+		 { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+		 { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+	 },
+	.modalHeader5G = {
+		/* 4 idle,t1,t2,b (4 bits per setting) */
+		.antCtrlCommon = LE32(0x220),
+		/* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */
+		.antCtrlCommon2 = LE32(0x44444),
+		 /* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */
+		.antCtrlChain = {
+			LE16(0x150), LE16(0x150), LE16(0x150),
+		},
+		 /* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */
+		.xatten1DB = {0x19, 0x19, 0x19},
+
+		/*
+		 * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin
+		 * for merlin (0xa20c/b20c 16:12
+		 */
+		.xatten1Margin = {0x14, 0x14, 0x14},
+		.tempSlope = 70,
+		.voltSlope = 0,
+		/* spurChans spur channels in usual fbin coding format */
+		.spurChans = {0, 0, 0, 0, 0},
+		/* noiseFloorThreshCh Check if the register is per chain */
+		.noiseFloorThreshCh = {-1, 0, 0},
+		.ob = {3, 3, 3}, /* 3 chain */
+		.db_stage2 = {3, 3, 3}, /* 3 chain */
+		.db_stage3 = {3, 3, 3}, /* doesn't exist for 2G */
+		.db_stage4 = {3, 3, 3},	 /* don't exist for 2G */
+		.xpaBiasLvl = 0,
+		.txFrameToDataStart = 0x0e,
+		.txFrameToPaOn = 0x0e,
+		.txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */
+		.antennaGain = 0,
+		.switchSettling = 0x2d,
+		.adcDesiredSize = -30,
+		.txEndToXpaOff = 0,
+		.txEndToRxOn = 0x2,
+		.txFrameToXpaOn = 0xe,
+		.thresh62 = 28,
+		.papdRateMaskHt20 = LE32(0x0cf0e0e0),
+		.papdRateMaskHt40 = LE32(0x6cf0e0e0),
+		.futureModal = {
+			0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+		},
+	 },
+	.base_ext2 = {
+		.tempSlopeLow = 35,
+		.tempSlopeHigh = 50,
+		.xatten1DBLow = {0, 0, 0},
+		.xatten1MarginLow = {0, 0, 0},
+		.xatten1DBHigh = {0, 0, 0},
+		.xatten1MarginHigh = {0, 0, 0}
+	 },
+	.calFreqPier5G = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5220, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5600, 0),
+		FREQ2FBIN(5700, 0),
+		FREQ2FBIN(5785, 0)
+	},
+	.calPierData5G = {
+			{
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+			},
+			{
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+			},
+			{
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+				{0, 0, 0, 0, 0},
+			},
+
+	},
+	.calTarget_freqbin_5G = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5240, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5600, 0),
+		FREQ2FBIN(5700, 0),
+		FREQ2FBIN(5825, 0)
+	},
+	.calTarget_freqbin_5GHT20 = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5240, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5700, 0),
+		FREQ2FBIN(5745, 0),
+		FREQ2FBIN(5825, 0)
+	},
+	.calTarget_freqbin_5GHT40 = {
+		FREQ2FBIN(5180, 0),
+		FREQ2FBIN(5240, 0),
+		FREQ2FBIN(5320, 0),
+		FREQ2FBIN(5400, 0),
+		FREQ2FBIN(5500, 0),
+		FREQ2FBIN(5700, 0),
+		FREQ2FBIN(5745, 0),
+		FREQ2FBIN(5825, 0)
+	 },
+	.calTargetPower5G = {
+		/* 6-24,36,48,54 */
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+		{ {30, 30, 28, 24} },
+	 },
+	.calTargetPower5GHT20 = {
+		/*
+		 * 0_8_16,1-3_9-11_17-19,
+		 * 4,5,6,7,12,13,14,15,20,21,22,23
+		 */
+		{ {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 0, 0, 0, 0} },
+		{ {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 0, 0, 0, 0} },
+		{ {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 0, 0, 0, 0} },
+		{ {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 0, 0, 0, 0} },
+		{ {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 0, 0, 0, 0} },
+		{ {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 0, 0, 0, 0} },
+		{ {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 0, 0, 0, 0} },
+		{ {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 0, 0, 0, 0} },
+	 },
+	.calTargetPower5GHT40 =  {
+		/*
+		 * 0_8_16,1-3_9-11_17-19,
+		 * 4,5,6,7,12,13,14,15,20,21,22,23
+		 */
+		{ {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 0, 0, 0, 0} },
+		{ {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 0, 0, 0, 0} },
+		{ {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 0, 0, 0, 0} },
+		{ {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 0, 0, 0, 0} },
+		{ {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 0, 0, 0, 0} },
+		{ {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 0, 0, 0, 0} },
+		{ {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 0, 0, 0, 0} },
+		{ {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 0, 0, 0, 0} },
+	 },
+	.ctlIndex_5G =  {
+		0x10, 0x16, 0x18, 0x40, 0x46,
+		0x48, 0x30, 0x36, 0x38
+	},
+	.ctl_freqbin_5G =  {
+		{
+			/* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
+			/* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0),
+			/* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+			/* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+		},
+		{
+			/* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0),
+			/* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0),
+			/* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+			/* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+		},
+
+		{
+			/* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+			/* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
+			/* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
+			/* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0),
+			/* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0),
+			/* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0),
+			/* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0),
+			/* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0)
+		},
+
+		{
+			/* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
+			/* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0),
+			/* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[3].ctlEdges[6].bChannel */ 0xFF,
+			/* Data[3].ctlEdges[7].bChannel */ 0xFF,
+		},
+
+		{
+			/* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[4].ctlEdges[4].bChannel */ 0xFF,
+			/* Data[4].ctlEdges[5].bChannel */ 0xFF,
+			/* Data[4].ctlEdges[6].bChannel */ 0xFF,
+			/* Data[4].ctlEdges[7].bChannel */ 0xFF,
+		},
+
+		{
+			/* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+			/* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0),
+			/* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0),
+			/* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
+			/* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0),
+			/* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
+			/* Data[5].ctlEdges[6].bChannel */ 0xFF,
+			/* Data[5].ctlEdges[7].bChannel */ 0xFF
+		},
+
+		{
+			/* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0),
+			/* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0),
+			/* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0),
+			/* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0)
+		},
+
+		{
+			/* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0),
+			/* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0),
+			/* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0),
+			/* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0),
+			/* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0),
+			/* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0),
+			/* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0),
+			/* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0)
+		},
+
+		{
+			/* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0),
+			/* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0),
+			/* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0),
+			/* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0),
+			/* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0),
+			/* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0),
+			/* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0),
+			/* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0)
+		}
+	 },
+	.ctlPowerData_5G = {
+		{
+			{
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
 			}
 		},
 		{
 			{
-				{60, 1}, {60, 1}, {60, 1}, {60, 1},
-				{60, 1}, {60, 1}, {60, 1}, {60, 0},
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
 			}
 		},
 		{
 			{
-				{60, 0}, {60, 1}, {60, 0}, {60, 1},
-				{60, 1}, {60, 1}, {60, 1}, {60, 1},
+				CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
 			}
 		},
 		{
 			{
-				{60, 0}, {60, 1}, {60, 1}, {60, 0},
-				{60, 1}, {60, 0}, {60, 0}, {60, 0},
+				CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+				CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
 			}
 		},
 		{
 			{
-				{60, 1}, {60, 1}, {60, 1}, {60, 0},
-				{60, 0}, {60, 0}, {60, 0}, {60, 0},
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+				CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
 			}
 		},
 		{
 			{
-				{60, 1}, {60, 1}, {60, 1}, {60, 1},
-				{60, 1}, {60, 0}, {60, 0}, {60, 0},
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
 			}
 		},
 		{
 			{
-				{60, 1}, {60, 1}, {60, 1}, {60, 1},
-				{60, 1}, {60, 1}, {60, 1}, {60, 1},
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
 			}
 		},
 		{
 			{
-				{60, 1}, {60, 1}, {60, 0}, {60, 1},
-				{60, 1}, {60, 1}, {60, 1}, {60, 0},
+				CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
 			}
 		},
 		{
 			{
-				{60, 1}, {60, 0}, {60, 1}, {60, 1},
-				{60, 1}, {60, 1}, {60, 0}, {60, 1},
+				CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
+				CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
 			}
 		},
 	 }
 };
 
+
+static const struct ar9300_eeprom *ar9300_eep_templates[] = {
+	&ar9300_default,
+	&ar9300_x112,
+	&ar9300_h116,
+	&ar9300_h112,
+	&ar9300_x113,
+};
+
+static const struct ar9300_eeprom *ar9003_eeprom_struct_find_by_id(int id)
+{
+#define N_LOOP (sizeof(ar9300_eep_templates) / sizeof(ar9300_eep_templates[0]))
+	int it;
+
+	for (it = 0; it < N_LOOP; it++)
+		if (ar9300_eep_templates[it]->templateVersion == id)
+			return ar9300_eep_templates[it];
+	return NULL;
+#undef N_LOOP
+}
+
+
 static u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz)
 {
-	if (fbin == AR9300_BCHAN_UNUSED)
+	if (fbin == AR5416_BCHAN_UNUSED)
 		return fbin;
 
 	return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin));
@@ -636,6 +2988,16 @@ static int ath9k_hw_ar9300_check_eeprom(struct ath_hw *ah)
 	return 0;
 }
 
+static int interpolate(int x, int xa, int xb, int ya, int yb)
+{
+	int bf, factor, plus;
+
+	bf = 2 * (yb - ya) * (x - xa) / (xb - xa);
+	factor = bf / 2;
+	plus = bf % 2;
+	return ya + factor + plus;
+}
+
 static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah,
 				      enum eeprom_param param)
 {
@@ -673,6 +3035,10 @@ static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah,
 		return le32_to_cpu(pBase->swreg);
 	case EEP_PAPRD:
 		return !!(pBase->featureEnable & BIT(5));
+	case EEP_CHAIN_MASK_REDUCE:
+		return (pBase->miscConfiguration >> 0x3) & 0x1;
+	case EEP_ANT_DIV_CTL1:
+		return le32_to_cpu(eep->base_ext1.ant_div_control);
 	default:
 		return 0;
 	}
@@ -711,8 +3077,8 @@ static bool ar9300_read_eeprom(struct ath_hw *ah, int address, u8 *buffer,
 	int i;
 
 	if ((address < 0) || ((address + count) / 2 > AR9300_EEPROM_SIZE - 1)) {
-		ath_print(common, ATH_DBG_EEPROM,
-			  "eeprom address not in range\n");
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"eeprom address not in range\n");
 		return false;
 	}
 
@@ -743,11 +3109,41 @@ static bool ar9300_read_eeprom(struct ath_hw *ah, int address, u8 *buffer,
 	return true;
 
 error:
-	ath_print(common, ATH_DBG_EEPROM,
-		  "unable to read eeprom region at offset %d\n", address);
+	ath_dbg(common, ATH_DBG_EEPROM,
+		"unable to read eeprom region at offset %d\n", address);
 	return false;
 }
 
+static bool ar9300_otp_read_word(struct ath_hw *ah, int addr, u32 *data)
+{
+	REG_READ(ah, AR9300_OTP_BASE + (4 * addr));
+
+	if (!ath9k_hw_wait(ah, AR9300_OTP_STATUS, AR9300_OTP_STATUS_TYPE,
+			   AR9300_OTP_STATUS_VALID, 1000))
+		return false;
+
+	*data = REG_READ(ah, AR9300_OTP_READ_DATA);
+	return true;
+}
+
+static bool ar9300_read_otp(struct ath_hw *ah, int address, u8 *buffer,
+			    int count)
+{
+	u32 data;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		int offset = 8 * ((address - i) % 4);
+		if (!ar9300_otp_read_word(ah, (address - i) / 4, &data))
+			return false;
+
+		buffer[i] = (data >> offset) & 0xff;
+	}
+
+	return true;
+}
+
+
 static void ar9300_comp_hdr_unpack(u8 *best, int *code, int *reference,
 				   int *length, int *major, int *minor)
 {
@@ -798,17 +3194,15 @@ static bool ar9300_uncompress_block(struct ath_hw *ah,
 		length &= 0xff;
 
 		if (length > 0 && spot >= 0 && spot+length <= mdataSize) {
-			ath_print(common, ATH_DBG_EEPROM,
-				  "Restore at %d: spot=%d "
-				  "offset=%d length=%d\n",
-				   it, spot, offset, length);
+			ath_dbg(common, ATH_DBG_EEPROM,
+				"Restore at %d: spot=%d offset=%d length=%d\n",
+				it, spot, offset, length);
 			memcpy(&mptr[spot], &block[it+2], length);
 			spot += length;
 		} else if (length > 0) {
-			ath_print(common, ATH_DBG_EEPROM,
-				  "Bad restore at %d: spot=%d "
-				  "offset=%d length=%d\n",
-				  it, spot, offset, length);
+			ath_dbg(common, ATH_DBG_EEPROM,
+				"Bad restore at %d: spot=%d offset=%d length=%d\n",
+				it, spot, offset, length);
 			return false;
 		}
 	}
@@ -824,45 +3218,80 @@ static int ar9300_compress_decision(struct ath_hw *ah,
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 	u8 *dptr;
+	const struct ar9300_eeprom *eep = NULL;
 
 	switch (code) {
 	case _CompressNone:
 		if (length != mdata_size) {
-			ath_print(common, ATH_DBG_EEPROM,
-				  "EEPROM structure size mismatch"
-				  "memory=%d eeprom=%d\n", mdata_size, length);
+			ath_dbg(common, ATH_DBG_EEPROM,
+				"EEPROM structure size mismatch memory=%d eeprom=%d\n",
+				mdata_size, length);
 			return -1;
 		}
 		memcpy(mptr, (u8 *) (word + COMP_HDR_LEN), length);
-		ath_print(common, ATH_DBG_EEPROM, "restored eeprom %d:"
-			  " uncompressed, length %d\n", it, length);
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"restored eeprom %d: uncompressed, length %d\n",
+			it, length);
 		break;
 	case _CompressBlock:
 		if (reference == 0) {
 			dptr = mptr;
 		} else {
-			if (reference != 2) {
-				ath_print(common, ATH_DBG_EEPROM,
-					  "cant find reference eeprom"
-					  "struct %d\n", reference);
+			eep = ar9003_eeprom_struct_find_by_id(reference);
+			if (eep == NULL) {
+				ath_dbg(common, ATH_DBG_EEPROM,
+					"cant find reference eeprom struct %d\n",
+					reference);
 				return -1;
 			}
-			memcpy(mptr, &ar9300_default, mdata_size);
+			memcpy(mptr, eep, mdata_size);
 		}
-		ath_print(common, ATH_DBG_EEPROM,
-			  "restore eeprom %d: block, reference %d,"
-			  " length %d\n", it, reference, length);
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"restore eeprom %d: block, reference %d, length %d\n",
+			it, reference, length);
 		ar9300_uncompress_block(ah, mptr, mdata_size,
 					(u8 *) (word + COMP_HDR_LEN), length);
 		break;
 	default:
-		ath_print(common, ATH_DBG_EEPROM, "unknown compression"
-			  " code %d\n", code);
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"unknown compression code %d\n", code);
 		return -1;
 	}
 	return 0;
 }
 
+typedef bool (*eeprom_read_op)(struct ath_hw *ah, int address, u8 *buffer,
+			       int count);
+
+static bool ar9300_check_header(void *data)
+{
+	u32 *word = data;
+	return !(*word == 0 || *word == ~0);
+}
+
+static bool ar9300_check_eeprom_header(struct ath_hw *ah, eeprom_read_op read,
+				       int base_addr)
+{
+	u8 header[4];
+
+	if (!read(ah, base_addr, header, 4))
+		return false;
+
+	return ar9300_check_header(header);
+}
+
+static int ar9300_eeprom_restore_flash(struct ath_hw *ah, u8 *mptr,
+				       int mdata_size)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	u16 *data = (u16 *) mptr;
+	int i;
+
+	for (i = 0; i < mdata_size / 2; i++, data++)
+		ath9k_hw_nvram_read(common, i, data);
+
+	return 0;
+}
 /*
  * Read the configuration data from the eeprom.
  * The data can be put in any specified memory buffer.
@@ -883,6 +3312,10 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
 	int it;
 	u16 checksum, mchecksum;
 	struct ath_common *common = ath9k_hw_common(ah);
+	eeprom_read_op read;
+
+	if (ath9k_hw_use_flash(ah))
+		return ar9300_eeprom_restore_flash(ah, mptr, mdata_size);
 
 	word = kzalloc(2048, GFP_KERNEL);
 	if (!word)
@@ -890,43 +3323,73 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
 
 	memcpy(mptr, &ar9300_default, mdata_size);
 
+	read = ar9300_read_eeprom;
+	if (AR_SREV_9485(ah))
+		cptr = AR9300_BASE_ADDR_4K;
+	else
+		cptr = AR9300_BASE_ADDR;
+	ath_dbg(common, ATH_DBG_EEPROM,
+		"Trying EEPROM accesss at Address 0x%04x\n", cptr);
+	if (ar9300_check_eeprom_header(ah, read, cptr))
+		goto found;
+
+	cptr = AR9300_BASE_ADDR_512;
+	ath_dbg(common, ATH_DBG_EEPROM,
+		"Trying EEPROM accesss at Address 0x%04x\n", cptr);
+	if (ar9300_check_eeprom_header(ah, read, cptr))
+		goto found;
+
+	read = ar9300_read_otp;
 	cptr = AR9300_BASE_ADDR;
+	ath_dbg(common, ATH_DBG_EEPROM,
+		"Trying OTP accesss at Address 0x%04x\n", cptr);
+	if (ar9300_check_eeprom_header(ah, read, cptr))
+		goto found;
+
+	cptr = AR9300_BASE_ADDR_512;
+	ath_dbg(common, ATH_DBG_EEPROM,
+		"Trying OTP accesss at Address 0x%04x\n", cptr);
+	if (ar9300_check_eeprom_header(ah, read, cptr))
+		goto found;
+
+	goto fail;
+
+found:
+	ath_dbg(common, ATH_DBG_EEPROM, "Found valid EEPROM data\n");
+
 	for (it = 0; it < MSTATE; it++) {
-		if (!ar9300_read_eeprom(ah, cptr, word, COMP_HDR_LEN))
+		if (!read(ah, cptr, word, COMP_HDR_LEN))
 			goto fail;
 
-		if ((word[0] == 0 && word[1] == 0 && word[2] == 0 &&
-		     word[3] == 0) || (word[0] == 0xff && word[1] == 0xff
-				       && word[2] == 0xff && word[3] == 0xff))
+		if (!ar9300_check_header(word))
 			break;
 
 		ar9300_comp_hdr_unpack(word, &code, &reference,
 				       &length, &major, &minor);
-		ath_print(common, ATH_DBG_EEPROM,
-			  "Found block at %x: code=%d ref=%d"
-			  "length=%d major=%d minor=%d\n", cptr, code,
-			  reference, length, major, minor);
-		if (length >= 1024) {
-			ath_print(common, ATH_DBG_EEPROM,
-				  "Skipping bad header\n");
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"Found block at %x: code=%d ref=%d length=%d major=%d minor=%d\n",
+			cptr, code, reference, length, major, minor);
+		if ((!AR_SREV_9485(ah) && length >= 1024) ||
+		    (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485)) {
+			ath_dbg(common, ATH_DBG_EEPROM,
+				"Skipping bad header\n");
 			cptr -= COMP_HDR_LEN;
 			continue;
 		}
 
 		osize = length;
-		ar9300_read_eeprom(ah, cptr, word,
-				   COMP_HDR_LEN + osize + COMP_CKSUM_LEN);
+		read(ah, cptr, word, COMP_HDR_LEN + osize + COMP_CKSUM_LEN);
 		checksum = ar9300_comp_cksum(&word[COMP_HDR_LEN], length);
 		mchecksum = word[COMP_HDR_LEN + osize] |
 		    (word[COMP_HDR_LEN + osize + 1] << 8);
-		ath_print(common, ATH_DBG_EEPROM,
-			  "checksum %x %x\n", checksum, mchecksum);
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"checksum %x %x\n", checksum, mchecksum);
 		if (checksum == mchecksum) {
 			ar9300_compress_decision(ah, it, code, reference, mptr,
 						 word, length, mdata_size);
 		} else {
-			ath_print(common, ATH_DBG_EEPROM,
-				  "skipping block with bad checksum\n");
+			ath_dbg(common, ATH_DBG_EEPROM,
+				"skipping block with bad checksum\n");
 		}
 		cptr -= (COMP_HDR_LEN + osize + COMP_CKSUM_LEN);
 	}
@@ -967,18 +3430,6 @@ static int ath9k_hw_ar9300_get_eeprom_rev(struct ath_hw *ah)
 	return 0;
 }
 
-static u8 ath9k_hw_ar9300_get_num_ant_config(struct ath_hw *ah,
-					     enum ath9k_hal_freq_band freq_band)
-{
-	return 1;
-}
-
-static u32 ath9k_hw_ar9300_get_eeprom_antenna_cfg(struct ath_hw *ah,
-						  struct ath9k_channel *chan)
-{
-	return -EINVAL;
-}
-
 static s32 ar9003_hw_xpa_bias_level_get(struct ath_hw *ah, bool is2ghz)
 {
 	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
@@ -992,9 +3443,15 @@ static s32 ar9003_hw_xpa_bias_level_get(struct ath_hw *ah, bool is2ghz)
 static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz)
 {
 	int bias = ar9003_hw_xpa_bias_level_get(ah, is2ghz);
-	REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, (bias & 0x3));
-	REG_RMW_FIELD(ah, AR_CH0_THERM, AR_CH0_THERM_SPARE,
-		      ((bias >> 2) & 0x3));
+
+	if (AR_SREV_9485(ah))
+		REG_RMW_FIELD(ah, AR_CH0_TOP2, AR_CH0_TOP2_XPABIASLVL, bias);
+	else {
+		REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias);
+		REG_RMW_FIELD(ah, AR_CH0_THERM, AR_CH0_THERM_XPABIASLVL_MSB,
+			      bias >> 2);
+		REG_RMW_FIELD(ah, AR_CH0_THERM, AR_CH0_THERM_XPASHORT2GND, 1);
+	}
 }
 
 static u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz)
@@ -1049,11 +3506,25 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 	value = ar9003_hw_ant_ctrl_chain_get(ah, 0, is2ghz);
 	REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_0, AR_SWITCH_TABLE_ALL, value);
 
-	value = ar9003_hw_ant_ctrl_chain_get(ah, 1, is2ghz);
-	REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_1, AR_SWITCH_TABLE_ALL, value);
+	if (!AR_SREV_9485(ah)) {
+		value = ar9003_hw_ant_ctrl_chain_get(ah, 1, is2ghz);
+		REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_1, AR_SWITCH_TABLE_ALL,
+			      value);
+
+		value = ar9003_hw_ant_ctrl_chain_get(ah, 2, is2ghz);
+		REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_2, AR_SWITCH_TABLE_ALL,
+			      value);
+	}
 
-	value = ar9003_hw_ant_ctrl_chain_get(ah, 2, is2ghz);
-	REG_RMW_FIELD(ah, AR_PHY_SWITCH_CHAIN_2, AR_SWITCH_TABLE_ALL, value);
+	if (AR_SREV_9485(ah)) {
+		value = ath9k_hw_ar9300_get_eeprom(ah, EEP_ANT_DIV_CTL1);
+		REG_RMW_FIELD(ah, AR_PHY_MC_GAIN_CTRL, AR_ANT_DIV_CTRL_ALL,
+			      value);
+		REG_RMW_FIELD(ah, AR_PHY_MC_GAIN_CTRL, AR_ANT_DIV_ENABLE,
+			      value >> 6);
+		REG_RMW_FIELD(ah, AR_PHY_CCK_DETECT, AR_FAST_DIV_ENABLE,
+			      value >> 7);
+	}
 }
 
 static void ar9003_hw_drive_strength_apply(struct ath_hw *ah)
@@ -1097,28 +3568,177 @@ static void ar9003_hw_drive_strength_apply(struct ath_hw *ah)
 	REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS4, reg);
 }
 
+static u16 ar9003_hw_atten_chain_get(struct ath_hw *ah, int chain,
+				     struct ath9k_channel *chan)
+{
+	int f[3], t[3];
+	u16 value;
+	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+
+	if (chain >= 0 && chain < 3) {
+		if (IS_CHAN_2GHZ(chan))
+			return eep->modalHeader2G.xatten1DB[chain];
+		else if (eep->base_ext2.xatten1DBLow[chain] != 0) {
+			t[0] = eep->base_ext2.xatten1DBLow[chain];
+			f[0] = 5180;
+			t[1] = eep->modalHeader5G.xatten1DB[chain];
+			f[1] = 5500;
+			t[2] = eep->base_ext2.xatten1DBHigh[chain];
+			f[2] = 5785;
+			value = ar9003_hw_power_interpolate((s32) chan->channel,
+							    f, t, 3);
+			return value;
+		} else
+			return eep->modalHeader5G.xatten1DB[chain];
+	}
+
+	return 0;
+}
+
+
+static u16 ar9003_hw_atten_chain_get_margin(struct ath_hw *ah, int chain,
+					    struct ath9k_channel *chan)
+{
+	int f[3], t[3];
+	u16 value;
+	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+
+	if (chain >= 0 && chain < 3) {
+		if (IS_CHAN_2GHZ(chan))
+			return eep->modalHeader2G.xatten1Margin[chain];
+		else if (eep->base_ext2.xatten1MarginLow[chain] != 0) {
+			t[0] = eep->base_ext2.xatten1MarginLow[chain];
+			f[0] = 5180;
+			t[1] = eep->modalHeader5G.xatten1Margin[chain];
+			f[1] = 5500;
+			t[2] = eep->base_ext2.xatten1MarginHigh[chain];
+			f[2] = 5785;
+			value = ar9003_hw_power_interpolate((s32) chan->channel,
+							    f, t, 3);
+			return value;
+		} else
+			return eep->modalHeader5G.xatten1Margin[chain];
+	}
+
+	return 0;
+}
+
+static void ar9003_hw_atten_apply(struct ath_hw *ah, struct ath9k_channel *chan)
+{
+	int i;
+	u16 value;
+	unsigned long ext_atten_reg[3] = {AR_PHY_EXT_ATTEN_CTL_0,
+					  AR_PHY_EXT_ATTEN_CTL_1,
+					  AR_PHY_EXT_ATTEN_CTL_2,
+					 };
+
+	/* Test value. if 0 then attenuation is unused. Don't load anything. */
+	for (i = 0; i < 3; i++) {
+		value = ar9003_hw_atten_chain_get(ah, i, chan);
+		REG_RMW_FIELD(ah, ext_atten_reg[i],
+			      AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value);
+
+		value = ar9003_hw_atten_chain_get_margin(ah, i, chan);
+		REG_RMW_FIELD(ah, ext_atten_reg[i],
+			      AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, value);
+	}
+}
+
+static bool is_pmu_set(struct ath_hw *ah, u32 pmu_reg, int pmu_set)
+{
+	int timeout = 100;
+
+	while (pmu_set != REG_READ(ah, pmu_reg)) {
+		if (timeout-- == 0)
+			return false;
+		REG_WRITE(ah, pmu_reg, pmu_set);
+		udelay(10);
+	}
+
+	return true;
+}
+
 static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah)
 {
 	int internal_regulator =
 		ath9k_hw_ar9300_get_eeprom(ah, EEP_INTERNAL_REGULATOR);
 
 	if (internal_regulator) {
-		/* Internal regulator is ON. Write swreg register. */
-		int swreg = ath9k_hw_ar9300_get_eeprom(ah, EEP_SWREG);
-		REG_WRITE(ah, AR_RTC_REG_CONTROL1,
-		REG_READ(ah, AR_RTC_REG_CONTROL1) &
-			 (~AR_RTC_REG_CONTROL1_SWREG_PROGRAM));
-		REG_WRITE(ah, AR_RTC_REG_CONTROL0, swreg);
-		/* Set REG_CONTROL1.SWREG_PROGRAM */
-		REG_WRITE(ah, AR_RTC_REG_CONTROL1,
-			  REG_READ(ah,
-				   AR_RTC_REG_CONTROL1) |
-				   AR_RTC_REG_CONTROL1_SWREG_PROGRAM);
+		if (AR_SREV_9485(ah)) {
+			int reg_pmu_set;
+
+			reg_pmu_set = REG_READ(ah, AR_PHY_PMU2) & ~AR_PHY_PMU2_PGM;
+			REG_WRITE(ah, AR_PHY_PMU2, reg_pmu_set);
+			if (!is_pmu_set(ah, AR_PHY_PMU2, reg_pmu_set))
+				return;
+
+			reg_pmu_set = (5 << 1) | (7 << 4) | (1 << 8) |
+				      (7 << 14) | (6 << 17) | (1 << 20) |
+				      (3 << 24) | (1 << 28);
+
+			REG_WRITE(ah, AR_PHY_PMU1, reg_pmu_set);
+			if (!is_pmu_set(ah, AR_PHY_PMU1, reg_pmu_set))
+				return;
+
+			reg_pmu_set = (REG_READ(ah, AR_PHY_PMU2) & ~0xFFC00000)
+					| (4 << 26);
+			REG_WRITE(ah, AR_PHY_PMU2, reg_pmu_set);
+			if (!is_pmu_set(ah, AR_PHY_PMU2, reg_pmu_set))
+				return;
+
+			reg_pmu_set = (REG_READ(ah, AR_PHY_PMU2) & ~0x00200000)
+					| (1 << 21);
+			REG_WRITE(ah, AR_PHY_PMU2, reg_pmu_set);
+			if (!is_pmu_set(ah, AR_PHY_PMU2, reg_pmu_set))
+				return;
+		} else {
+			/* Internal regulator is ON. Write swreg register. */
+			int swreg = ath9k_hw_ar9300_get_eeprom(ah, EEP_SWREG);
+			REG_WRITE(ah, AR_RTC_REG_CONTROL1,
+				  REG_READ(ah, AR_RTC_REG_CONTROL1) &
+				  (~AR_RTC_REG_CONTROL1_SWREG_PROGRAM));
+			REG_WRITE(ah, AR_RTC_REG_CONTROL0, swreg);
+			/* Set REG_CONTROL1.SWREG_PROGRAM */
+			REG_WRITE(ah, AR_RTC_REG_CONTROL1,
+				  REG_READ(ah,
+					   AR_RTC_REG_CONTROL1) |
+					   AR_RTC_REG_CONTROL1_SWREG_PROGRAM);
+		}
 	} else {
-		REG_WRITE(ah, AR_RTC_SLEEP_CLK,
-			  (REG_READ(ah,
-				    AR_RTC_SLEEP_CLK) |
-				    AR_RTC_FORCE_SWREG_PRD));
+		if (AR_SREV_9485(ah)) {
+			REG_RMW_FIELD(ah, AR_PHY_PMU2, AR_PHY_PMU2_PGM, 0);
+			while (REG_READ_FIELD(ah, AR_PHY_PMU2,
+					      AR_PHY_PMU2_PGM))
+				udelay(10);
+
+			REG_RMW_FIELD(ah, AR_PHY_PMU1, AR_PHY_PMU1_PWD, 0x1);
+			while (!REG_READ_FIELD(ah, AR_PHY_PMU1,
+					       AR_PHY_PMU1_PWD))
+				udelay(10);
+			REG_RMW_FIELD(ah, AR_PHY_PMU2, AR_PHY_PMU2_PGM, 0x1);
+			while (!REG_READ_FIELD(ah, AR_PHY_PMU2,
+					      AR_PHY_PMU2_PGM))
+				udelay(10);
+		} else
+			REG_WRITE(ah, AR_RTC_SLEEP_CLK,
+				  (REG_READ(ah,
+				   AR_RTC_SLEEP_CLK) |
+				   AR_RTC_FORCE_SWREG_PRD));
+	}
+
+}
+
+static void ar9003_hw_apply_tuning_caps(struct ath_hw *ah)
+{
+	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+	u8 tuning_caps_param = eep->baseEepHeader.params_for_tuning_caps[0];
+
+	if (eep->baseEepHeader.featureEnable & 0x40) {
+		tuning_caps_param &= 0x7f;
+		REG_RMW_FIELD(ah, AR_CH0_XTAL, AR_CH0_XTAL_CAPINDAC,
+			      tuning_caps_param);
+		REG_RMW_FIELD(ah, AR_CH0_XTAL, AR_CH0_XTAL_CAPOUTDAC,
+			      tuning_caps_param);
 	}
 }
 
@@ -1128,7 +3748,10 @@ static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah,
 	ar9003_hw_xpa_bias_level_apply(ah, IS_CHAN_2GHZ(chan));
 	ar9003_hw_ant_ctrl_apply(ah, IS_CHAN_2GHZ(chan));
 	ar9003_hw_drive_strength_apply(ah);
+	ar9003_hw_atten_apply(ah, chan);
 	ar9003_hw_internal_regulator_apply(ah);
+	if (AR_SREV_9485(ah))
+		ar9003_hw_apply_tuning_caps(ah);
 }
 
 static void ath9k_hw_ar9300_set_addac(struct ath_hw *ah,
@@ -1189,7 +3812,7 @@ static int ar9003_hw_power_interpolate(int32_t x,
 			if (hx == lx)
 				y = ly;
 			else	/* interpolate  */
-				y = ly + (((x - lx) * (hy - ly)) / (hx - lx));
+				y = interpolate(x, lx, hx, ly, hy);
 		} else		/* only low is good, use it */
 			y = ly;
 	} else if (hhave)	/* only high is good, use it */
@@ -1558,22 +4181,9 @@ static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq,
 	    ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_23, freq,
 					      is2GHz) + ht40PowerIncForPdadc;
 
-	while (i < ar9300RateSize) {
-		ath_print(common, ATH_DBG_EEPROM,
-			  "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
-		i++;
-
-		ath_print(common, ATH_DBG_EEPROM,
-			  "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
-		i++;
-
-		ath_print(common, ATH_DBG_EEPROM,
-			  "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
-		i++;
-
-		ath_print(common, ATH_DBG_EEPROM,
-			  "TPC[%02d] 0x%08x\n", i, targetPowerValT2[i]);
-		i++;
+	for (i = 0; i < ar9300RateSize; i++) {
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"TPC[%02d] 0x%08x\n", i, targetPowerValT2[i]);
 	}
 }
 
@@ -1592,18 +4202,17 @@ static int ar9003_hw_cal_pier_get(struct ath_hw *ah,
 	struct ath_common *common = ath9k_hw_common(ah);
 
 	if (ichain >= AR9300_MAX_CHAINS) {
-		ath_print(common, ATH_DBG_EEPROM,
-			  "Invalid chain index, must be less than %d\n",
-			  AR9300_MAX_CHAINS);
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"Invalid chain index, must be less than %d\n",
+			AR9300_MAX_CHAINS);
 		return -1;
 	}
 
 	if (mode) {		/* 5GHz */
 		if (ipier >= AR9300_NUM_5G_CAL_PIERS) {
-			ath_print(common, ATH_DBG_EEPROM,
-				  "Invalid 5GHz cal pier index, must "
-				  "be less than %d\n",
-				  AR9300_NUM_5G_CAL_PIERS);
+			ath_dbg(common, ATH_DBG_EEPROM,
+				"Invalid 5GHz cal pier index, must be less than %d\n",
+				AR9300_NUM_5G_CAL_PIERS);
 			return -1;
 		}
 		pCalPier = &(eep->calFreqPier5G[ipier]);
@@ -1611,9 +4220,9 @@ static int ar9003_hw_cal_pier_get(struct ath_hw *ah,
 		is2GHz = 0;
 	} else {
 		if (ipier >= AR9300_NUM_2G_CAL_PIERS) {
-			ath_print(common, ATH_DBG_EEPROM,
-				  "Invalid 2GHz cal pier index, must "
-				  "be less than %d\n", AR9300_NUM_2G_CAL_PIERS);
+			ath_dbg(common, ATH_DBG_EEPROM,
+				"Invalid 2GHz cal pier index, must be less than %d\n",
+				AR9300_NUM_2G_CAL_PIERS);
 			return -1;
 		}
 
@@ -1637,27 +4246,32 @@ static int ar9003_hw_power_control_override(struct ath_hw *ah,
 {
 	int tempSlope = 0;
 	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+	int f[3], t[3];
 
 	REG_RMW(ah, AR_PHY_TPC_11_B0,
 		(correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
 		AR_PHY_TPC_OLPC_GAIN_DELTA);
-	REG_RMW(ah, AR_PHY_TPC_11_B1,
-		(correction[1] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
-		AR_PHY_TPC_OLPC_GAIN_DELTA);
-	REG_RMW(ah, AR_PHY_TPC_11_B2,
-		(correction[2] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
-		AR_PHY_TPC_OLPC_GAIN_DELTA);
+	if (ah->caps.tx_chainmask & BIT(1))
+		REG_RMW(ah, AR_PHY_TPC_11_B1,
+			(correction[1] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
+			AR_PHY_TPC_OLPC_GAIN_DELTA);
+	if (ah->caps.tx_chainmask & BIT(2))
+		REG_RMW(ah, AR_PHY_TPC_11_B2,
+			(correction[2] << AR_PHY_TPC_OLPC_GAIN_DELTA_S),
+			AR_PHY_TPC_OLPC_GAIN_DELTA);
 
 	/* enable open loop power control on chip */
 	REG_RMW(ah, AR_PHY_TPC_6_B0,
 		(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
 		AR_PHY_TPC_6_ERROR_EST_MODE);
-	REG_RMW(ah, AR_PHY_TPC_6_B1,
-		(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
-		AR_PHY_TPC_6_ERROR_EST_MODE);
-	REG_RMW(ah, AR_PHY_TPC_6_B2,
-		(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
-		AR_PHY_TPC_6_ERROR_EST_MODE);
+	if (ah->caps.tx_chainmask & BIT(1))
+		REG_RMW(ah, AR_PHY_TPC_6_B1,
+			(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
+			AR_PHY_TPC_6_ERROR_EST_MODE);
+	if (ah->caps.tx_chainmask & BIT(2))
+		REG_RMW(ah, AR_PHY_TPC_6_B2,
+			(3 << AR_PHY_TPC_6_ERROR_EST_MODE_S),
+			AR_PHY_TPC_6_ERROR_EST_MODE);
 
 	/*
 	 * enable temperature compensation
@@ -1665,7 +4279,16 @@ static int ar9003_hw_power_control_override(struct ath_hw *ah,
 	 */
 	if (frequency < 4000)
 		tempSlope = eep->modalHeader2G.tempSlope;
-	else
+	else if (eep->base_ext2.tempSlopeLow != 0) {
+		t[0] = eep->base_ext2.tempSlopeLow;
+		f[0] = 5180;
+		t[1] = eep->modalHeader5G.tempSlope;
+		f[1] = 5500;
+		t[2] = eep->base_ext2.tempSlopeHigh;
+		f[2] = 5785;
+		tempSlope = ar9003_hw_power_interpolate((s32) frequency,
+							f, t, 3);
+	} else
 		tempSlope = eep->modalHeader5G.tempSlope;
 
 	REG_RMW_FIELD(ah, AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, tempSlope);
@@ -1753,11 +4376,11 @@ static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency)
 
 	/* interpolate  */
 	for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) {
-		ath_print(common, ATH_DBG_EEPROM,
-			  "ch=%d f=%d low=%d %d h=%d %d\n",
-			  ichain, frequency, lfrequency[ichain],
-			  lcorrection[ichain], hfrequency[ichain],
-			  hcorrection[ichain]);
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"ch=%d f=%d low=%d %d h=%d %d\n",
+			ichain, frequency, lfrequency[ichain],
+			lcorrection[ichain], hfrequency[ichain],
+			hcorrection[ichain]);
 		/* they're the same, so just pick one */
 		if (hfrequency[ichain] == lfrequency[ichain]) {
 			correction[ichain] = lcorrection[ichain];
@@ -1769,25 +4392,23 @@ static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency)
 			/* so is the high frequency, interpolate */
 			if (hfrequency[ichain] - frequency < 1000) {
 
-				correction[ichain] = lcorrection[ichain] +
-				    (((frequency - lfrequency[ichain]) *
-				      (hcorrection[ichain] -
-				       lcorrection[ichain])) /
-				     (hfrequency[ichain] - lfrequency[ichain]));
-
-				temperature[ichain] = ltemperature[ichain] +
-				    (((frequency - lfrequency[ichain]) *
-				      (htemperature[ichain] -
-				       ltemperature[ichain])) /
-				     (hfrequency[ichain] - lfrequency[ichain]));
-
-				voltage[ichain] =
-				    lvoltage[ichain] +
-				    (((frequency -
-				       lfrequency[ichain]) * (hvoltage[ichain] -
-							      lvoltage[ichain]))
-				     / (hfrequency[ichain] -
-					lfrequency[ichain]));
+				correction[ichain] = interpolate(frequency,
+						lfrequency[ichain],
+						hfrequency[ichain],
+						lcorrection[ichain],
+						hcorrection[ichain]);
+
+				temperature[ichain] = interpolate(frequency,
+						lfrequency[ichain],
+						hfrequency[ichain],
+						ltemperature[ichain],
+						htemperature[ichain]);
+
+				voltage[ichain] = interpolate(frequency,
+						lfrequency[ichain],
+						hfrequency[ichain],
+						lvoltage[ichain],
+						hvoltage[ichain]);
 			}
 			/* only low is good, use it */
 			else {
@@ -1811,9 +4432,9 @@ static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency)
 	ar9003_hw_power_control_override(ah, frequency, correction, voltage,
 					 temperature);
 
-	ath_print(common, ATH_DBG_EEPROM,
-		  "for frequency=%d, calibration correction = %d %d %d\n",
-		  frequency, correction[0], correction[1], correction[2]);
+	ath_dbg(common, ATH_DBG_EEPROM,
+		"for frequency=%d, calibration correction = %d %d %d\n",
+		frequency, correction[0], correction[1], correction[2]);
 
 	return 0;
 }
@@ -1827,9 +4448,9 @@ static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep,
 	struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
 
 	if (is2GHz)
-		return ctl_2g[idx].ctlEdges[edge].tPower;
+		return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge]);
 	else
-		return ctl_5g[idx].ctlEdges[edge].tPower;
+		return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge]);
 }
 
 static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
@@ -1847,15 +4468,15 @@ static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
 
 	if (is2GHz) {
 		if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq &&
-		    ctl_2g[idx].ctlEdges[edge - 1].flag)
-			return ctl_2g[idx].ctlEdges[edge - 1].tPower;
+		    CTL_EDGE_FLAGS(ctl_2g[idx].ctlEdges[edge - 1]))
+			return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge - 1]);
 	} else {
 		if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq &&
-		    ctl_5g[idx].ctlEdges[edge - 1].flag)
-			return ctl_5g[idx].ctlEdges[edge - 1].tPower;
+		    CTL_EDGE_FLAGS(ctl_5g[idx].ctlEdges[edge - 1]))
+			return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge - 1]);
 	}
 
-	return AR9300_MAX_RATE_POWER;
+	return MAX_RATE_POWER;
 }
 
 /*
@@ -1864,7 +4485,7 @@ static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
 static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep,
 					u16 freq, int idx, bool is2GHz)
 {
-	u16 twiceMaxEdgePower = AR9300_MAX_RATE_POWER;
+	u16 twiceMaxEdgePower = MAX_RATE_POWER;
 	u8 *ctl_freqbin = is2GHz ?
 		&eep->ctl_freqbin_2G[idx][0] :
 		&eep->ctl_freqbin_5G[idx][0];
@@ -1874,7 +4495,7 @@ static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep,
 
 	/* Get the edge power */
 	for (edge = 0;
-	     (edge < num_edges) && (ctl_freqbin[edge] != AR9300_BCHAN_UNUSED);
+	     (edge < num_edges) && (ctl_freqbin[edge] != AR5416_BCHAN_UNUSED);
 	     edge++) {
 		/*
 		 * If there's an exact channel match or an inband flag set
@@ -1912,21 +4533,23 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ar9300_eeprom *pEepData = &ah->eeprom.ar9300_eep;
-	u16 twiceMaxEdgePower = AR9300_MAX_RATE_POWER;
+	u16 twiceMaxEdgePower = MAX_RATE_POWER;
 	static const u16 tpScaleReductionTable[5] = {
-		0, 3, 6, 9, AR9300_MAX_RATE_POWER
+		0, 3, 6, 9, MAX_RATE_POWER
 	};
 	int i;
 	int16_t  twiceLargestAntenna;
 	u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
-	u16 ctlModesFor11a[] = {
+	static const u16 ctlModesFor11a[] = {
 		CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40
 	};
-	u16 ctlModesFor11g[] = {
+	static const u16 ctlModesFor11g[] = {
 		CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT,
 		CTL_11G_EXT, CTL_2GHT40
 	};
-	u16 numCtlModes, *pCtlMode, ctlMode, freq;
+	u16 numCtlModes;
+	const u16 *pCtlMode;
+	u16 ctlMode, freq;
 	struct chan_centers centers;
 	u8 *ctlIndex;
 	u8 ctlNum;
@@ -2016,11 +4639,10 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
 		else
 			freq = centers.ctl_center;
 
-		ath_print(common, ATH_DBG_REGULATORY,
-			  "LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, "
-			  "EXT_ADDITIVE %d\n",
-			  ctlMode, numCtlModes, isHt40CtlMode,
-			  (pCtlMode[ctlMode] & EXT_ADDITIVE));
+		ath_dbg(common, ATH_DBG_REGULATORY,
+			"LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, EXT_ADDITIVE %d\n",
+			ctlMode, numCtlModes, isHt40CtlMode,
+			(pCtlMode[ctlMode] & EXT_ADDITIVE));
 
 		/* walk through each CTL index stored in EEPROM */
 		if (is2ghz) {
@@ -2032,12 +4654,10 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
 		}
 
 		for (i = 0; (i < ctlNum) && ctlIndex[i]; i++) {
-			ath_print(common, ATH_DBG_REGULATORY,
-				  "LOOP-Ctlidx %d: cfgCtl 0x%2.2x "
-				  "pCtlMode 0x%2.2x ctlIndex 0x%2.2x "
-				  "chan %dn",
-				  i, cfgCtl, pCtlMode[ctlMode], ctlIndex[i],
-				  chan->channel);
+			ath_dbg(common, ATH_DBG_REGULATORY,
+				"LOOP-Ctlidx %d: cfgCtl 0x%2.2x pCtlMode 0x%2.2x ctlIndex 0x%2.2x chan %d\n",
+				i, cfgCtl, pCtlMode[ctlMode], ctlIndex[i],
+				chan->channel);
 
 				/*
 				 * compare test group from regulatory
@@ -2076,11 +4696,10 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
 
 			minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower);
 
-			ath_print(common, ATH_DBG_REGULATORY,
-				  "SEL-Min ctlMode %d pCtlMode %d 2xMaxEdge %d "
-				  "sP %d minCtlPwr %d\n",
-				  ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
-				  scaledPower, minCtlPower);
+			ath_dbg(common, ATH_DBG_REGULATORY,
+				"SEL-Min ctlMode %d pCtlMode %d 2xMaxEdge %d sP %d minCtlPwr %d\n",
+				ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower,
+				scaledPower, minCtlPower);
 
 			/* Apply ctl mode to correct target power set */
 			switch (pCtlMode[ctlMode]) {
@@ -2127,40 +4746,101 @@ static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah,
 	} /* end ctl mode checking */
 }
 
+static inline u8 mcsidx_to_tgtpwridx(unsigned int mcs_idx, u8 base_pwridx)
+{
+	u8 mod_idx = mcs_idx % 8;
+
+	if (mod_idx <= 3)
+		return mod_idx ? (base_pwridx + 1) : base_pwridx;
+	else
+		return base_pwridx + 4 * (mcs_idx / 8) + mod_idx - 2;
+}
+
 static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah,
 					struct ath9k_channel *chan, u16 cfgCtl,
 					u8 twiceAntennaReduction,
 					u8 twiceMaxRegulatoryPower,
-					u8 powerLimit)
+					u8 powerLimit, bool test)
 {
+	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	struct ath_common *common = ath9k_hw_common(ah);
+	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+	struct ar9300_modal_eep_header *modal_hdr;
 	u8 targetPowerValT2[ar9300RateSize];
-	unsigned int i = 0;
+	u8 target_power_val_t2_eep[ar9300RateSize];
+	unsigned int i = 0, paprd_scale_factor = 0;
+	u8 pwr_idx, min_pwridx = 0;
 
 	ar9003_hw_set_target_power_eeprom(ah, chan->channel, targetPowerValT2);
+
+	if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) {
+		if (IS_CHAN_2GHZ(chan))
+			modal_hdr = &eep->modalHeader2G;
+		else
+			modal_hdr = &eep->modalHeader5G;
+
+		ah->paprd_ratemask =
+			le32_to_cpu(modal_hdr->papdRateMaskHt20) &
+			AR9300_PAPRD_RATE_MASK;
+
+		ah->paprd_ratemask_ht40 =
+			le32_to_cpu(modal_hdr->papdRateMaskHt40) &
+			AR9300_PAPRD_RATE_MASK;
+
+		paprd_scale_factor = ar9003_get_paprd_scale_factor(ah, chan);
+		min_pwridx = IS_CHAN_HT40(chan) ? ALL_TARGET_HT40_0_8_16 :
+						  ALL_TARGET_HT20_0_8_16;
+
+		if (!ah->paprd_table_write_done) {
+			memcpy(target_power_val_t2_eep, targetPowerValT2,
+			       sizeof(targetPowerValT2));
+			for (i = 0; i < 24; i++) {
+				pwr_idx = mcsidx_to_tgtpwridx(i, min_pwridx);
+				if (ah->paprd_ratemask & (1 << i)) {
+					if (targetPowerValT2[pwr_idx] &&
+					    targetPowerValT2[pwr_idx] ==
+					    target_power_val_t2_eep[pwr_idx])
+						targetPowerValT2[pwr_idx] -=
+							paprd_scale_factor;
+				}
+			}
+		}
+		memcpy(target_power_val_t2_eep, targetPowerValT2,
+		       sizeof(targetPowerValT2));
+	}
+
 	ar9003_hw_set_power_per_rate_table(ah, chan,
 					   targetPowerValT2, cfgCtl,
 					   twiceAntennaReduction,
 					   twiceMaxRegulatoryPower,
 					   powerLimit);
 
-	while (i < ar9300RateSize) {
-		ath_print(common, ATH_DBG_EEPROM,
-			  "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
-		i++;
-		ath_print(common, ATH_DBG_EEPROM,
-			  "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
-		i++;
-		ath_print(common, ATH_DBG_EEPROM,
-			  "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]);
-		i++;
-		ath_print(common, ATH_DBG_EEPROM,
-			  "TPC[%02d] 0x%08x\n\n", i, targetPowerValT2[i]);
-		i++;
+	if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) {
+		for (i = 0; i < ar9300RateSize; i++) {
+			if ((ah->paprd_ratemask & (1 << i)) &&
+			    (abs(targetPowerValT2[i] -
+				target_power_val_t2_eep[i]) >
+			    paprd_scale_factor)) {
+				ah->paprd_ratemask &= ~(1 << i);
+				ath_dbg(common, ATH_DBG_EEPROM,
+					"paprd disabled for mcs %d\n", i);
+			}
+		}
 	}
 
-	/* Write target power array to registers */
-	ar9003_hw_tx_power_regwrite(ah, targetPowerValT2);
+	regulatory->max_power_level = 0;
+	for (i = 0; i < ar9300RateSize; i++) {
+		if (targetPowerValT2[i] > regulatory->max_power_level)
+			regulatory->max_power_level = targetPowerValT2[i];
+	}
+
+	if (test)
+		return;
+
+	for (i = 0; i < ar9300RateSize; i++) {
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"TPC[%02d] 0x%08x\n", i, targetPowerValT2[i]);
+	}
 
 	/*
 	 * This is the TX power we send back to driver core,
@@ -2180,8 +4860,24 @@ static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah,
 		i = ALL_TARGET_HT20_0_8_16; /* ht20 */
 
 	ah->txpower_limit = targetPowerValT2[i];
+	regulatory->max_power_level = targetPowerValT2[i];
 
+	/* Write target power array to registers */
+	ar9003_hw_tx_power_regwrite(ah, targetPowerValT2);
 	ar9003_hw_calibration_apply(ah, chan->channel);
+
+	if (IS_CHAN_2GHZ(chan)) {
+		if (IS_CHAN_HT40(chan))
+			i = ALL_TARGET_HT40_0_8_16;
+		else
+			i = ALL_TARGET_HT20_0_8_16;
+	} else {
+		if (IS_CHAN_HT40(chan))
+			i = ALL_TARGET_HT40_7;
+		else
+			i = ALL_TARGET_HT20_7;
+	}
+	ah->paprd_target_power = targetPowerValT2[i];
 }
 
 static u16 ath9k_hw_ar9300_get_spur_channel(struct ath_hw *ah,
@@ -2204,14 +4900,43 @@ s32 ar9003_hw_get_rx_gain_idx(struct ath_hw *ah)
 	return (eep->baseEepHeader.txrxgain) & 0xf; /* bits 3:0 */
 }
 
+u8 *ar9003_get_spur_chan_ptr(struct ath_hw *ah, bool is_2ghz)
+{
+	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+
+	if (is_2ghz)
+		return eep->modalHeader2G.spurChans;
+	else
+		return eep->modalHeader5G.spurChans;
+}
+
+unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah,
+					   struct ath9k_channel *chan)
+{
+	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+
+	if (IS_CHAN_2GHZ(chan))
+		return MS(le32_to_cpu(eep->modalHeader2G.papdRateMaskHt20),
+			  AR9300_PAPRD_SCALE_1);
+	else {
+		if (chan->channel >= 5700)
+		return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20),
+			  AR9300_PAPRD_SCALE_1);
+		else if (chan->channel >= 5400)
+			return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40),
+				   AR9300_PAPRD_SCALE_2);
+		else
+			return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40),
+				  AR9300_PAPRD_SCALE_1);
+	}
+}
+
 const struct eeprom_ops eep_ar9300_ops = {
 	.check_eeprom = ath9k_hw_ar9300_check_eeprom,
 	.get_eeprom = ath9k_hw_ar9300_get_eeprom,
 	.fill_eeprom = ath9k_hw_ar9300_fill_eeprom,
 	.get_eeprom_ver = ath9k_hw_ar9300_get_eeprom_ver,
 	.get_eeprom_rev = ath9k_hw_ar9300_get_eeprom_rev,
-	.get_num_ant_config = ath9k_hw_ar9300_get_num_ant_config,
-	.get_eeprom_antenna_cfg = ath9k_hw_ar9300_get_eeprom_antenna_cfg,
 	.set_board_values = ath9k_hw_ar9300_set_board_values,
 	.set_addac = ath9k_hw_ar9300_set_addac,
 	.set_txpower = ath9k_hw_ar9300_set_txpower,
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
index 3c533bb983c..afb0b5ee186 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -20,47 +20,22 @@
 /* #define AR9300_NUM_CTLS              21 */
 #define AR9300_NUM_CTLS_5G           9
 #define AR9300_NUM_CTLS_2G           12
-#define AR9300_CTL_MODE_M            0xF
 #define AR9300_NUM_BAND_EDGES_5G     8
 #define AR9300_NUM_BAND_EDGES_2G     4
-#define AR9300_NUM_PD_GAINS          4
-#define AR9300_PD_GAINS_IN_MASK      4
-#define AR9300_PD_GAIN_ICEPTS        5
-#define AR9300_EEPROM_MODAL_SPURS    5
-#define AR9300_MAX_RATE_POWER        63
-#define AR9300_NUM_PDADC_VALUES      128
-#define AR9300_NUM_RATES             16
-#define AR9300_BCHAN_UNUSED          0xFF
-#define AR9300_MAX_PWR_RANGE_IN_HALF_DB 64
-#define AR9300_OPFLAGS_11A           0x01
-#define AR9300_OPFLAGS_11G           0x02
-#define AR9300_OPFLAGS_5G_HT40       0x04
-#define AR9300_OPFLAGS_2G_HT40       0x08
-#define AR9300_OPFLAGS_5G_HT20       0x10
-#define AR9300_OPFLAGS_2G_HT20       0x20
 #define AR9300_EEPMISC_BIG_ENDIAN    0x01
 #define AR9300_EEPMISC_WOW           0x02
 #define AR9300_CUSTOMER_DATA_SIZE    20
 
-#define FREQ2FBIN(x, y) ((y) ? ((x) - 2300) : (((x) - 4800) / 5))
 #define FBIN2FREQ(x, y) ((y) ? (2300 + x) : (4800 + 5 * x))
 #define AR9300_MAX_CHAINS            3
 #define AR9300_ANT_16S               25
 #define AR9300_FUTURE_MODAL_SZ       6
 
-#define AR9300_NUM_ANT_CHAIN_FIELDS     7
-#define AR9300_NUM_ANT_COMMON_FIELDS    4
-#define AR9300_SIZE_ANT_CHAIN_FIELD     3
-#define AR9300_SIZE_ANT_COMMON_FIELD    4
-#define AR9300_ANT_CHAIN_MASK           0x7
-#define AR9300_ANT_COMMON_MASK          0xf
-#define AR9300_CHAIN_0_IDX              0
-#define AR9300_CHAIN_1_IDX              1
-#define AR9300_CHAIN_2_IDX              2
-
-#define AR928X_NUM_ANT_CHAIN_FIELDS     6
-#define AR928X_SIZE_ANT_CHAIN_FIELD     2
-#define AR928X_ANT_CHAIN_MASK           0x3
+#define AR9300_PAPRD_RATE_MASK		0x01ffffff
+#define AR9300_PAPRD_SCALE_1		0x0e000000
+#define AR9300_PAPRD_SCALE_1_S		25
+#define AR9300_PAPRD_SCALE_2		0x70000000
+#define AR9300_PAPRD_SCALE_2_S		28
 
 /* Delta from which to start power to pdadc table */
 /* This offset is used in both open loop and closed loop power control
@@ -71,14 +46,20 @@
  */
 #define AR9300_PWR_TABLE_OFFSET  0
 
-/* enable flags for voltage and temp compensation */
-#define ENABLE_TEMP_COMPENSATION 0x01
-#define ENABLE_VOLT_COMPENSATION 0x02
 /* byte addressable */
 #define AR9300_EEPROM_SIZE (16*1024)
-#define FIXED_CCA_THRESHOLD 15
 
+#define AR9300_BASE_ADDR_4K 0xfff
 #define AR9300_BASE_ADDR 0x3ff
+#define AR9300_BASE_ADDR_512 0x1ff
+
+#define AR9300_OTP_BASE			0x14000
+#define AR9300_OTP_STATUS		0x15f18
+#define AR9300_OTP_STATUS_TYPE		0x7
+#define AR9300_OTP_STATUS_VALID		0x4
+#define AR9300_OTP_STATUS_ACCESS_BUSY	0x2
+#define AR9300_OTP_STATUS_SM_BUSY	0x1
+#define AR9300_OTP_READ_DATA		0x15f1c
 
 enum targetPowerHTRates {
 	HT_TARGET_RATE_0_8_16,
@@ -216,7 +197,7 @@ struct ar9300_modal_eep_header {
 	int8_t tempSlope;
 	int8_t voltSlope;
 	/* spur channels in usual fbin coding format */
-	u8 spurChans[AR9300_EEPROM_MODAL_SPURS];
+	u8 spurChans[AR_EEPROM_MODAL_SPURS];
 	/* 3  Check if the register is per chain */
 	int8_t noiseFloorThreshCh[AR9300_MAX_CHAINS];
 	u8 ob[AR9300_MAX_CHAINS];
@@ -236,7 +217,7 @@ struct ar9300_modal_eep_header {
 	u8 thresh62;
 	__le32 papdRateMaskHt20;
 	__le32 papdRateMaskHt40;
-	u8 futureModal[24];
+	u8 futureModal[10];
 } __packed;
 
 struct ar9300_cal_data_per_freq_op_loop {
@@ -261,17 +242,26 @@ struct cal_tgt_pow_ht {
 	u8 tPow2x[14];
 } __packed;
 
-struct cal_ctl_edge_pwr {
-	u8 tPower:6,
-	   flag:2;
-} __packed;
-
 struct cal_ctl_data_2g {
-	struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_2G];
+	u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G];
 } __packed;
 
 struct cal_ctl_data_5g {
-	struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G];
+	u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G];
+} __packed;
+
+struct ar9300_BaseExtension_1 {
+	u8 ant_div_control;
+	u8 future[13];
+} __packed;
+
+struct ar9300_BaseExtension_2 {
+	int8_t    tempSlopeLow;
+	int8_t    tempSlopeHigh;
+	u8   xatten1DBLow[AR9300_MAX_CHAINS];
+	u8   xatten1MarginLow[AR9300_MAX_CHAINS];
+	u8   xatten1DBHigh[AR9300_MAX_CHAINS];
+	u8   xatten1MarginHigh[AR9300_MAX_CHAINS];
 } __packed;
 
 struct ar9300_eeprom {
@@ -283,6 +273,7 @@ struct ar9300_eeprom {
 	struct ar9300_base_eep_hdr baseEepHeader;
 
 	struct ar9300_modal_eep_header modalHeader2G;
+	struct ar9300_BaseExtension_1 base_ext1;
 	u8 calFreqPier2G[AR9300_NUM_2G_CAL_PIERS];
 	struct ar9300_cal_data_per_freq_op_loop
 	 calPierData2G[AR9300_MAX_CHAINS][AR9300_NUM_2G_CAL_PIERS];
@@ -302,6 +293,7 @@ struct ar9300_eeprom {
 	u8 ctl_freqbin_2G[AR9300_NUM_CTLS_2G][AR9300_NUM_BAND_EDGES_2G];
 	struct cal_ctl_data_2g ctlPowerData_2G[AR9300_NUM_CTLS_2G];
 	struct ar9300_modal_eep_header modalHeader5G;
+	struct ar9300_BaseExtension_2 base_ext2;
 	u8 calFreqPier5G[AR9300_NUM_5G_CAL_PIERS];
 	struct ar9300_cal_data_per_freq_op_loop
 	 calPierData5G[AR9300_MAX_CHAINS][AR9300_NUM_5G_CAL_PIERS];
@@ -322,4 +314,8 @@ struct ar9300_eeprom {
 s32 ar9003_hw_get_tx_gain_idx(struct ath_hw *ah);
 s32 ar9003_hw_get_rx_gain_idx(struct ath_hw *ah);
 
+u8 *ar9003_get_spur_chan_ptr(struct ath_hw *ah, bool is_2ghz);
+
+unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah,
+					   struct ath9k_channel *chan);
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
index c2a057156bf..6137634e46c 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c
@@ -17,20 +17,10 @@
 #include "hw.h"
 #include "ar9003_mac.h"
 #include "ar9003_2p2_initvals.h"
+#include "ar9485_initvals.h"
 
 /* General hardware code for the AR9003 hadware family */
 
-static bool ar9003_hw_macversion_supported(u32 macversion)
-{
-	switch (macversion) {
-	case AR_SREV_VERSION_9300:
-		return true;
-	default:
-		break;
-	}
-	return false;
-}
-
 /*
  * The AR9003 family uses a new INI format (pre, core, post
  * arrays per subsystem). This provides support for the
@@ -38,72 +28,134 @@ static bool ar9003_hw_macversion_supported(u32 macversion)
  */
 static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
 {
-	/* mac */
-	INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
-	INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
-		       ar9300_2p2_mac_core,
-		       ARRAY_SIZE(ar9300_2p2_mac_core), 2);
-	INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
-		       ar9300_2p2_mac_postamble,
-		       ARRAY_SIZE(ar9300_2p2_mac_postamble), 5);
-
-	/* bb */
-	INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
-	INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
-		       ar9300_2p2_baseband_core,
-		       ARRAY_SIZE(ar9300_2p2_baseband_core), 2);
-	INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
-		       ar9300_2p2_baseband_postamble,
-		       ARRAY_SIZE(ar9300_2p2_baseband_postamble), 5);
-
-	/* radio */
-	INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
-	INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
-		       ar9300_2p2_radio_core,
-		       ARRAY_SIZE(ar9300_2p2_radio_core), 2);
-	INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
-		       ar9300_2p2_radio_postamble,
-		       ARRAY_SIZE(ar9300_2p2_radio_postamble), 5);
-
-	/* soc */
-	INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
-		       ar9300_2p2_soc_preamble,
-		       ARRAY_SIZE(ar9300_2p2_soc_preamble), 2);
-	INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
-	INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
-		       ar9300_2p2_soc_postamble,
-		       ARRAY_SIZE(ar9300_2p2_soc_postamble), 5);
-
-	/* rx/tx gain */
-	INIT_INI_ARRAY(&ah->iniModesRxGain,
-		       ar9300Common_rx_gain_table_2p2,
-		       ARRAY_SIZE(ar9300Common_rx_gain_table_2p2), 2);
-	INIT_INI_ARRAY(&ah->iniModesTxGain,
-		       ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
-		       ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2),
-		       5);
-
-	/* Load PCIE SERDES settings from INI */
-
-	/* Awake Setting */
-
-	INIT_INI_ARRAY(&ah->iniPcieSerdes,
-		       ar9300PciePhy_pll_on_clkreq_disable_L1_2p2,
-		       ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p2),
-		       2);
-
-	/* Sleep Setting */
-
-	INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
-		       ar9300PciePhy_clkreq_enable_L1_2p2,
-		       ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p2),
-		       2);
-
-	/* Fast clock modal settings */
-	INIT_INI_ARRAY(&ah->iniModesAdditional,
-		       ar9300Modes_fast_clock_2p2,
-		       ARRAY_SIZE(ar9300Modes_fast_clock_2p2),
-		       3);
+	if (AR_SREV_9485(ah)) {
+		/* mac */
+		INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
+		INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
+				ar9485_1_0_mac_core,
+				ARRAY_SIZE(ar9485_1_0_mac_core), 2);
+		INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
+				ar9485_1_0_mac_postamble,
+				ARRAY_SIZE(ar9485_1_0_mac_postamble), 5);
+
+		/* bb */
+		INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], ar9485_1_0,
+				ARRAY_SIZE(ar9485_1_0), 2);
+		INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
+				ar9485_1_0_baseband_core,
+				ARRAY_SIZE(ar9485_1_0_baseband_core), 2);
+		INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
+				ar9485_1_0_baseband_postamble,
+				ARRAY_SIZE(ar9485_1_0_baseband_postamble), 5);
+
+		/* radio */
+		INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
+		INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
+				ar9485_1_0_radio_core,
+				ARRAY_SIZE(ar9485_1_0_radio_core), 2);
+		INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
+				ar9485_1_0_radio_postamble,
+				ARRAY_SIZE(ar9485_1_0_radio_postamble), 2);
+
+		/* soc */
+		INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
+				ar9485_1_0_soc_preamble,
+				ARRAY_SIZE(ar9485_1_0_soc_preamble), 2);
+		INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
+		INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST], NULL, 0, 0);
+
+		/* rx/tx gain */
+		INIT_INI_ARRAY(&ah->iniModesRxGain,
+				ar9485Common_rx_gain_1_0,
+				ARRAY_SIZE(ar9485Common_rx_gain_1_0), 2);
+		INIT_INI_ARRAY(&ah->iniModesTxGain,
+				ar9485Modes_lowest_ob_db_tx_gain_1_0,
+				ARRAY_SIZE(ar9485Modes_lowest_ob_db_tx_gain_1_0),
+				5);
+
+		/* Load PCIE SERDES settings from INI */
+
+		/* Awake Setting */
+
+		INIT_INI_ARRAY(&ah->iniPcieSerdes,
+				ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1,
+				ARRAY_SIZE(ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1),
+				2);
+
+		/* Sleep Setting */
+
+		INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+				ar9485_1_0_pcie_phy_pll_on_clkreq_enable_L1,
+				ARRAY_SIZE(ar9485_1_0_pcie_phy_pll_on_clkreq_enable_L1),
+				2);
+	} else {
+		/* mac */
+		INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
+		INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
+				ar9300_2p2_mac_core,
+				ARRAY_SIZE(ar9300_2p2_mac_core), 2);
+		INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
+				ar9300_2p2_mac_postamble,
+				ARRAY_SIZE(ar9300_2p2_mac_postamble), 5);
+
+		/* bb */
+		INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], NULL, 0, 0);
+		INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
+				ar9300_2p2_baseband_core,
+				ARRAY_SIZE(ar9300_2p2_baseband_core), 2);
+		INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
+				ar9300_2p2_baseband_postamble,
+				ARRAY_SIZE(ar9300_2p2_baseband_postamble), 5);
+
+		/* radio */
+		INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
+		INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
+				ar9300_2p2_radio_core,
+				ARRAY_SIZE(ar9300_2p2_radio_core), 2);
+		INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
+				ar9300_2p2_radio_postamble,
+				ARRAY_SIZE(ar9300_2p2_radio_postamble), 5);
+
+		/* soc */
+		INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
+				ar9300_2p2_soc_preamble,
+				ARRAY_SIZE(ar9300_2p2_soc_preamble), 2);
+		INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
+		INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST],
+				ar9300_2p2_soc_postamble,
+				ARRAY_SIZE(ar9300_2p2_soc_postamble), 5);
+
+		/* rx/tx gain */
+		INIT_INI_ARRAY(&ah->iniModesRxGain,
+				ar9300Common_rx_gain_table_2p2,
+				ARRAY_SIZE(ar9300Common_rx_gain_table_2p2), 2);
+		INIT_INI_ARRAY(&ah->iniModesTxGain,
+				ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
+				ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2),
+				5);
+
+		/* Load PCIE SERDES settings from INI */
+
+		/* Awake Setting */
+
+		INIT_INI_ARRAY(&ah->iniPcieSerdes,
+				ar9300PciePhy_pll_on_clkreq_disable_L1_2p2,
+				ARRAY_SIZE(ar9300PciePhy_pll_on_clkreq_disable_L1_2p2),
+				2);
+
+		/* Sleep Setting */
+
+		INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
+				ar9300PciePhy_clkreq_enable_L1_2p2,
+				ARRAY_SIZE(ar9300PciePhy_clkreq_enable_L1_2p2),
+				2);
+
+		/* Fast clock modal settings */
+		INIT_INI_ARRAY(&ah->iniModesAdditional,
+				ar9300Modes_fast_clock_2p2,
+				ARRAY_SIZE(ar9300Modes_fast_clock_2p2),
+				3);
+	}
 }
 
 static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
@@ -111,22 +163,52 @@ static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
 	switch (ar9003_hw_get_tx_gain_idx(ah)) {
 	case 0:
 	default:
-		INIT_INI_ARRAY(&ah->iniModesTxGain,
-			       ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
-			       ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2),
-			       5);
+		if (AR_SREV_9485(ah))
+			INIT_INI_ARRAY(&ah->iniModesTxGain,
+				       ar9485Modes_lowest_ob_db_tx_gain_1_0,
+				       ARRAY_SIZE(ar9485Modes_lowest_ob_db_tx_gain_1_0),
+				       5);
+		else
+			INIT_INI_ARRAY(&ah->iniModesTxGain,
+				       ar9300Modes_lowest_ob_db_tx_gain_table_2p2,
+				       ARRAY_SIZE(ar9300Modes_lowest_ob_db_tx_gain_table_2p2),
+				       5);
 		break;
 	case 1:
-		INIT_INI_ARRAY(&ah->iniModesTxGain,
-			       ar9300Modes_high_ob_db_tx_gain_table_2p2,
-			       ARRAY_SIZE(ar9300Modes_high_ob_db_tx_gain_table_2p2),
-			       5);
+		if (AR_SREV_9485(ah))
+			INIT_INI_ARRAY(&ah->iniModesTxGain,
+				       ar9485Modes_high_ob_db_tx_gain_1_0,
+				       ARRAY_SIZE(ar9485Modes_lowest_ob_db_tx_gain_1_0),
+				       5);
+		else
+			INIT_INI_ARRAY(&ah->iniModesTxGain,
+				       ar9300Modes_high_ob_db_tx_gain_table_2p2,
+				       ARRAY_SIZE(ar9300Modes_high_ob_db_tx_gain_table_2p2),
+				       5);
 		break;
 	case 2:
-		INIT_INI_ARRAY(&ah->iniModesTxGain,
-			       ar9300Modes_low_ob_db_tx_gain_table_2p2,
-			       ARRAY_SIZE(ar9300Modes_low_ob_db_tx_gain_table_2p2),
-			       5);
+		if (AR_SREV_9485(ah))
+			INIT_INI_ARRAY(&ah->iniModesTxGain,
+				       ar9485Modes_low_ob_db_tx_gain_1_0,
+				       ARRAY_SIZE(ar9485Modes_lowest_ob_db_tx_gain_1_0),
+				       5);
+		else
+			INIT_INI_ARRAY(&ah->iniModesTxGain,
+				       ar9300Modes_low_ob_db_tx_gain_table_2p2,
+				       ARRAY_SIZE(ar9300Modes_low_ob_db_tx_gain_table_2p2),
+				       5);
+		break;
+	case 3:
+		if (AR_SREV_9485(ah))
+			INIT_INI_ARRAY(&ah->iniModesTxGain,
+				       ar9485Modes_high_power_tx_gain_1_0,
+				       ARRAY_SIZE(ar9485Modes_high_power_tx_gain_1_0),
+				       5);
+		else
+			INIT_INI_ARRAY(&ah->iniModesTxGain,
+				       ar9300Modes_high_power_tx_gain_table_2p2,
+				       ARRAY_SIZE(ar9300Modes_high_power_tx_gain_table_2p2),
+				       5);
 		break;
 	}
 }
@@ -136,16 +218,28 @@ static void ar9003_rx_gain_table_apply(struct ath_hw *ah)
 	switch (ar9003_hw_get_rx_gain_idx(ah)) {
 	case 0:
 	default:
-		INIT_INI_ARRAY(&ah->iniModesRxGain,
-			       ar9300Common_rx_gain_table_2p2,
-			       ARRAY_SIZE(ar9300Common_rx_gain_table_2p2),
-			       2);
+		if (AR_SREV_9485(ah))
+			INIT_INI_ARRAY(&ah->iniModesRxGain,
+				       ar9485Common_rx_gain_1_0,
+				       ARRAY_SIZE(ar9485Common_rx_gain_1_0),
+				       2);
+		else
+			INIT_INI_ARRAY(&ah->iniModesRxGain,
+				       ar9300Common_rx_gain_table_2p2,
+				       ARRAY_SIZE(ar9300Common_rx_gain_table_2p2),
+				       2);
 		break;
 	case 1:
-		INIT_INI_ARRAY(&ah->iniModesRxGain,
-			       ar9300Common_wo_xlna_rx_gain_table_2p2,
-			       ARRAY_SIZE(ar9300Common_wo_xlna_rx_gain_table_2p2),
-			       2);
+		if (AR_SREV_9485(ah))
+			INIT_INI_ARRAY(&ah->iniModesRxGain,
+				       ar9485Common_wo_xlna_rx_gain_1_0,
+				       ARRAY_SIZE(ar9485Common_wo_xlna_rx_gain_1_0),
+				       2);
+		else
+			INIT_INI_ARRAY(&ah->iniModesRxGain,
+				       ar9300Common_wo_xlna_rx_gain_table_2p2,
+				       ARRAY_SIZE(ar9300Common_wo_xlna_rx_gain_table_2p2),
+				       2);
 		break;
 	}
 }
@@ -216,7 +310,6 @@ void ar9003_hw_attach_ops(struct ath_hw *ah)
 
 	priv_ops->init_mode_regs = ar9003_hw_init_mode_regs;
 	priv_ops->init_mode_gain_regs = ar9003_hw_init_mode_gain_regs;
-	priv_ops->macversion_supported = ar9003_hw_macversion_supported;
 
 	ops->config_pci_powersave = ar9003_hw_configpcipowersave;
 
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
index 3b424ca1ba8..4ceddbbdfce 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c
@@ -182,8 +182,8 @@ static bool ar9003_hw_get_isr(struct ath_hw *ah, enum ath9k_int *masked)
 		}
 
 		if (sync_cause & AR_INTR_SYNC_LOCAL_TIMEOUT)
-			ath_print(common, ATH_DBG_INTERRUPT,
-				  "AR_INTR_SYNC_LOCAL_TIMEOUT\n");
+			ath_dbg(common, ATH_DBG_INTERRUPT,
+				"AR_INTR_SYNC_LOCAL_TIMEOUT\n");
 
 		REG_WRITE(ah, AR_INTR_SYNC_CAUSE_CLR, sync_cause);
 		(void) REG_READ(ah, AR_INTR_SYNC_CAUSE_CLR);
@@ -237,73 +237,76 @@ static int ar9003_hw_proc_txdesc(struct ath_hw *ah, void *ds,
 				 struct ath_tx_status *ts)
 {
 	struct ar9003_txs *ads;
+	u32 status;
 
 	ads = &ah->ts_ring[ah->ts_tail];
 
-	if ((ads->status8 & AR_TxDone) == 0)
+	status = ACCESS_ONCE(ads->status8);
+	if ((status & AR_TxDone) == 0)
 		return -EINPROGRESS;
 
 	ah->ts_tail = (ah->ts_tail + 1) % ah->ts_size;
 
 	if ((MS(ads->ds_info, AR_DescId) != ATHEROS_VENDOR_ID) ||
 	    (MS(ads->ds_info, AR_TxRxDesc) != 1)) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_XMIT,
-			  "Tx Descriptor error %x\n", ads->ds_info);
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_XMIT,
+			"Tx Descriptor error %x\n", ads->ds_info);
 		memset(ads, 0, sizeof(*ads));
 		return -EIO;
 	}
 
+	if (status & AR_TxOpExceeded)
+		ts->ts_status |= ATH9K_TXERR_XTXOP;
+	ts->ts_rateindex = MS(status, AR_FinalTxIdx);
+	ts->ts_seqnum = MS(status, AR_SeqNum);
+	ts->tid = MS(status, AR_TxTid);
+
 	ts->qid = MS(ads->ds_info, AR_TxQcuNum);
 	ts->desc_id = MS(ads->status1, AR_TxDescId);
-	ts->ts_seqnum = MS(ads->status8, AR_SeqNum);
 	ts->ts_tstamp = ads->status4;
 	ts->ts_status = 0;
 	ts->ts_flags  = 0;
 
-	if (ads->status3 & AR_ExcessiveRetries)
+	status = ACCESS_ONCE(ads->status2);
+	ts->ts_rssi_ctl0 = MS(status, AR_TxRSSIAnt00);
+	ts->ts_rssi_ctl1 = MS(status, AR_TxRSSIAnt01);
+	ts->ts_rssi_ctl2 = MS(status, AR_TxRSSIAnt02);
+	if (status & AR_TxBaStatus) {
+		ts->ts_flags |= ATH9K_TX_BA;
+		ts->ba_low = ads->status5;
+		ts->ba_high = ads->status6;
+	}
+
+	status = ACCESS_ONCE(ads->status3);
+	if (status & AR_ExcessiveRetries)
 		ts->ts_status |= ATH9K_TXERR_XRETRY;
-	if (ads->status3 & AR_Filtered)
+	if (status & AR_Filtered)
 		ts->ts_status |= ATH9K_TXERR_FILT;
-	if (ads->status3 & AR_FIFOUnderrun) {
+	if (status & AR_FIFOUnderrun) {
 		ts->ts_status |= ATH9K_TXERR_FIFO;
 		ath9k_hw_updatetxtriglevel(ah, true);
 	}
-	if (ads->status8 & AR_TxOpExceeded)
-		ts->ts_status |= ATH9K_TXERR_XTXOP;
-	if (ads->status3 & AR_TxTimerExpired)
+	if (status & AR_TxTimerExpired)
 		ts->ts_status |= ATH9K_TXERR_TIMER_EXPIRED;
-
-	if (ads->status3 & AR_DescCfgErr)
+	if (status & AR_DescCfgErr)
 		ts->ts_flags |= ATH9K_TX_DESC_CFG_ERR;
-	if (ads->status3 & AR_TxDataUnderrun) {
+	if (status & AR_TxDataUnderrun) {
 		ts->ts_flags |= ATH9K_TX_DATA_UNDERRUN;
 		ath9k_hw_updatetxtriglevel(ah, true);
 	}
-	if (ads->status3 & AR_TxDelimUnderrun) {
+	if (status & AR_TxDelimUnderrun) {
 		ts->ts_flags |= ATH9K_TX_DELIM_UNDERRUN;
 		ath9k_hw_updatetxtriglevel(ah, true);
 	}
-	if (ads->status2 & AR_TxBaStatus) {
-		ts->ts_flags |= ATH9K_TX_BA;
-		ts->ba_low = ads->status5;
-		ts->ba_high = ads->status6;
-	}
+	ts->ts_shortretry = MS(status, AR_RTSFailCnt);
+	ts->ts_longretry = MS(status, AR_DataFailCnt);
+	ts->ts_virtcol = MS(status, AR_VirtRetryCnt);
 
-	ts->ts_rateindex = MS(ads->status8, AR_FinalTxIdx);
-
-	ts->ts_rssi = MS(ads->status7, AR_TxRSSICombined);
-	ts->ts_rssi_ctl0 = MS(ads->status2, AR_TxRSSIAnt00);
-	ts->ts_rssi_ctl1 = MS(ads->status2, AR_TxRSSIAnt01);
-	ts->ts_rssi_ctl2 = MS(ads->status2, AR_TxRSSIAnt02);
-	ts->ts_rssi_ext0 = MS(ads->status7, AR_TxRSSIAnt10);
-	ts->ts_rssi_ext1 = MS(ads->status7, AR_TxRSSIAnt11);
-	ts->ts_rssi_ext2 = MS(ads->status7, AR_TxRSSIAnt12);
-	ts->ts_shortretry = MS(ads->status3, AR_RTSFailCnt);
-	ts->ts_longretry = MS(ads->status3, AR_DataFailCnt);
-	ts->ts_virtcol = MS(ads->status3, AR_VirtRetryCnt);
-	ts->ts_antenna = 0;
-
-	ts->tid = MS(ads->status8, AR_TxTid);
+	status = ACCESS_ONCE(ads->status7);
+	ts->ts_rssi = MS(status, AR_TxRSSICombined);
+	ts->ts_rssi_ext0 = MS(status, AR_TxRSSIAnt10);
+	ts->ts_rssi_ext1 = MS(status, AR_TxRSSIAnt11);
+	ts->ts_rssi_ext2 = MS(status, AR_TxRSSIAnt12);
 
 	memset(ads, 0, sizeof(*ads));
 
@@ -319,7 +322,6 @@ static void ar9003_hw_set11n_txdesc(struct ath_hw *ah, void *ds,
 	if (txpower > ah->txpower_limit)
 		txpower = ah->txpower_limit;
 
-	txpower += ah->txpower_indexoffset;
 	if (txpower > 63)
 		txpower = 63;
 
@@ -407,12 +409,36 @@ static void ar9003_hw_set11n_ratescenario(struct ath_hw *ah, void *ds,
 static void ar9003_hw_set11n_aggr_first(struct ath_hw *ah, void *ds,
 					u32 aggrLen)
 {
+#define FIRST_DESC_NDELIMS 60
 	struct ar9003_txc *ads = (struct ar9003_txc *) ds;
 
 	ads->ctl12 |= (AR_IsAggr | AR_MoreAggr);
 
-	ads->ctl17 &= ~AR_AggrLen;
-	ads->ctl17 |= SM(aggrLen, AR_AggrLen);
+	if (ah->ent_mode & AR_ENT_OTP_MPSD) {
+		u32 ctl17, ndelim;
+		/*
+		 * Add delimiter when using RTS/CTS with aggregation
+		 * and non enterprise AR9003 card
+		 */
+		ctl17 = ads->ctl17;
+		ndelim = MS(ctl17, AR_PadDelim);
+
+		if (ndelim < FIRST_DESC_NDELIMS) {
+			aggrLen += (FIRST_DESC_NDELIMS - ndelim) * 4;
+			ndelim = FIRST_DESC_NDELIMS;
+		}
+
+		ctl17 &= ~AR_AggrLen;
+		ctl17 |= SM(aggrLen, AR_AggrLen);
+
+		ctl17 &= ~AR_PadDelim;
+		ctl17 |= SM(ndelim, AR_PadDelim);
+
+		ads->ctl17 = ctl17;
+	} else {
+		ads->ctl17 &= ~AR_AggrLen;
+		ads->ctl17 |= SM(aggrLen, AR_AggrLen);
+	}
 }
 
 static void ar9003_hw_set11n_aggr_middle(struct ath_hw *ah, void *ds,
@@ -587,9 +613,9 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs,
 		 * possibly be reviewing the last subframe. AR_CRCErr
 		 * is the CRC of the actual data.
 		 */
-		if (rxsp->status11 & AR_CRCErr) {
+		if (rxsp->status11 & AR_CRCErr)
 			rxs->rs_status |= ATH9K_RXERR_CRC;
-		} else if (rxsp->status11 & AR_PHYErr) {
+		if (rxsp->status11 & AR_PHYErr) {
 			phyerr = MS(rxsp->status11, AR_PHYErrCode);
 			/*
 			 * If we reach a point here where AR_PostDelimCRCErr is
@@ -612,11 +638,12 @@ int ath9k_hw_process_rxdesc_edma(struct ath_hw *ah, struct ath_rx_status *rxs,
 				rxs->rs_phyerr = phyerr;
 			}
 
-		} else if (rxsp->status11 & AR_DecryptCRCErr) {
+		}
+		if (rxsp->status11 & AR_DecryptCRCErr)
 			rxs->rs_status |= ATH9K_RXERR_DECRYPT;
-		} else if (rxsp->status11 & AR_MichaelErr) {
+		if (rxsp->status11 & AR_MichaelErr)
 			rxs->rs_status |= ATH9K_RXERR_MIC;
-		} else if (rxsp->status11 & AR_KeyMiss)
+		if (rxsp->status11 & AR_KeyMiss)
 			rxs->rs_status |= ATH9K_RXERR_DECRYPT;
 	}
 
@@ -631,10 +658,10 @@ void ath9k_hw_reset_txstatus_ring(struct ath_hw *ah)
 	memset((void *) ah->ts_ring, 0,
 		ah->ts_size * sizeof(struct ar9003_txs));
 
-	ath_print(ath9k_hw_common(ah), ATH_DBG_XMIT,
-		  "TS Start 0x%x End 0x%x Virt %p, Size %d\n",
-		   ah->ts_paddr_start, ah->ts_paddr_end,
-		   ah->ts_ring, ah->ts_size);
+	ath_dbg(ath9k_hw_common(ah), ATH_DBG_XMIT,
+		"TS Start 0x%x End 0x%x Virt %p, Size %d\n",
+		ah->ts_paddr_start, ah->ts_paddr_end,
+		ah->ts_ring, ah->ts_size);
 
 	REG_WRITE(ah, AR_Q_STATUS_RING_START, ah->ts_paddr_start);
 	REG_WRITE(ah, AR_Q_STATUS_RING_END, ah->ts_paddr_end);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.h b/drivers/net/wireless/ath/ath9k/ar9003_mac.h
index 9f2cea70a84..45cc7e80436 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_mac.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.h
@@ -65,7 +65,7 @@ struct ar9003_rxs {
 	u32 status9;
 	u32 status10;
 	u32 status11;
-} __packed;
+} __packed __aligned(4);
 
 /* Transmit Control Descriptor */
 struct ar9003_txc {
@@ -93,7 +93,7 @@ struct ar9003_txc {
 	u32 ctl21;  /* DMA control 21 */
 	u32 ctl22;  /* DMA control 22 */
 	u32 pad[9]; /* pad to cache line (128 bytes/32 dwords) */
-} __packed;
+} __packed __aligned(4);
 
 struct ar9003_txs {
 	u32 ds_info;
@@ -105,7 +105,7 @@ struct ar9003_txs {
 	u32 status6;
 	u32 status7;
 	u32 status8;
-} __packed;
+} __packed __aligned(4);
 
 void ar9003_hw_attach_mac_ops(struct ath_hw *hw);
 void ath9k_hw_set_rx_bufsize(struct ath_hw *ah, u16 buf_size);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
index 716db414c25..356d2fd7882 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c
@@ -19,45 +19,124 @@
 
 void ar9003_paprd_enable(struct ath_hw *ah, bool val)
 {
+	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+	struct ath9k_channel *chan = ah->curchan;
+
+	if (val) {
+		ah->paprd_table_write_done = true;
+
+		ah->eep_ops->set_txpower(ah, chan,
+				ath9k_regd_get_ctl(regulatory, chan),
+				chan->chan->max_antenna_gain * 2,
+				chan->chan->max_power * 2,
+				min((u32) MAX_RATE_POWER,
+				(u32) regulatory->power_limit), false);
+	}
+
 	REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B0,
 		      AR_PHY_PAPRD_CTRL0_PAPRD_ENABLE, !!val);
-	REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B1,
-		      AR_PHY_PAPRD_CTRL0_PAPRD_ENABLE, !!val);
-	REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B2,
-		      AR_PHY_PAPRD_CTRL0_PAPRD_ENABLE, !!val);
+	if (ah->caps.tx_chainmask & BIT(1))
+		REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B1,
+			      AR_PHY_PAPRD_CTRL0_PAPRD_ENABLE, !!val);
+	if (ah->caps.tx_chainmask & BIT(2))
+		REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B2,
+			      AR_PHY_PAPRD_CTRL0_PAPRD_ENABLE, !!val);
 }
 EXPORT_SYMBOL(ar9003_paprd_enable);
 
-static void ar9003_paprd_setup_single_table(struct ath_hw *ah)
+static int ar9003_get_training_power_2g(struct ath_hw *ah)
+{
+	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+	struct ar9300_modal_eep_header *hdr = &eep->modalHeader2G;
+	unsigned int power, scale, delta;
+
+	scale = MS(le32_to_cpu(hdr->papdRateMaskHt20), AR9300_PAPRD_SCALE_1);
+	power = REG_READ_FIELD(ah, AR_PHY_POWERTX_RATE5,
+			       AR_PHY_POWERTX_RATE5_POWERTXHT20_0);
+
+	delta = abs((int) ah->paprd_target_power - (int) power);
+	if (delta > scale)
+		return -1;
+
+	if (delta < 4)
+		power -= 4 - delta;
+
+	return power;
+}
+
+static int ar9003_get_training_power_5g(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
-	struct ar9300_modal_eep_header *hdr;
-	const u32 ctrl0[3] = {
+	struct ar9300_modal_eep_header *hdr = &eep->modalHeader5G;
+	struct ath9k_channel *chan = ah->curchan;
+	unsigned int power, scale, delta;
+
+	if (chan->channel >= 5700)
+		scale = MS(le32_to_cpu(hdr->papdRateMaskHt20),
+			   AR9300_PAPRD_SCALE_1);
+	else if (chan->channel >= 5400)
+		scale = MS(le32_to_cpu(hdr->papdRateMaskHt40),
+			   AR9300_PAPRD_SCALE_2);
+	else
+		scale = MS(le32_to_cpu(hdr->papdRateMaskHt40),
+			   AR9300_PAPRD_SCALE_1);
+
+	if (IS_CHAN_HT40(chan))
+		power = REG_READ_FIELD(ah, AR_PHY_POWERTX_RATE8,
+			AR_PHY_POWERTX_RATE8_POWERTXHT40_5);
+	else
+		power = REG_READ_FIELD(ah, AR_PHY_POWERTX_RATE6,
+			AR_PHY_POWERTX_RATE6_POWERTXHT20_5);
+
+	power += scale;
+	delta = abs((int) ah->paprd_target_power - (int) power);
+	if (delta > scale)
+		return -1;
+
+	power += 2 * get_streams(common->tx_chainmask);
+	return power;
+}
+
+static int ar9003_paprd_setup_single_table(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	static const u32 ctrl0[3] = {
 		AR_PHY_PAPRD_CTRL0_B0,
 		AR_PHY_PAPRD_CTRL0_B1,
 		AR_PHY_PAPRD_CTRL0_B2
 	};
-	const u32 ctrl1[3] = {
+	static const u32 ctrl1[3] = {
 		AR_PHY_PAPRD_CTRL1_B0,
 		AR_PHY_PAPRD_CTRL1_B1,
 		AR_PHY_PAPRD_CTRL1_B2
 	};
-	u32 am_mask, ht40_mask;
+	int training_power;
 	int i;
 
-	if (ah->curchan && IS_CHAN_5GHZ(ah->curchan))
-		hdr = &eep->modalHeader5G;
+	if (IS_CHAN_2GHZ(ah->curchan))
+		training_power = ar9003_get_training_power_2g(ah);
 	else
-		hdr = &eep->modalHeader2G;
-
-	am_mask = le32_to_cpu(hdr->papdRateMaskHt20);
-	ht40_mask = le32_to_cpu(hdr->papdRateMaskHt40);
+		training_power = ar9003_get_training_power_5g(ah);
 
-	REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2AM, AR_PHY_PAPRD_AM2AM_MASK, am_mask);
-	REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2PM, AR_PHY_PAPRD_AM2PM_MASK, am_mask);
-	REG_RMW_FIELD(ah, AR_PHY_PAPRD_HT40, AR_PHY_PAPRD_HT40_MASK, ht40_mask);
-
-	for (i = 0; i < 3; i++) {
+	if (training_power < 0) {
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"PAPRD target power delta out of range");
+		return -ERANGE;
+	}
+	ah->paprd_training_power = training_power;
+	ath_dbg(common, ATH_DBG_CALIBRATE,
+		"Training power: %d, Target power: %d\n",
+		ah->paprd_training_power, ah->paprd_target_power);
+
+	REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2AM, AR_PHY_PAPRD_AM2AM_MASK,
+		      ah->paprd_ratemask);
+	REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2PM, AR_PHY_PAPRD_AM2PM_MASK,
+		      ah->paprd_ratemask);
+	REG_RMW_FIELD(ah, AR_PHY_PAPRD_HT40, AR_PHY_PAPRD_HT40_MASK,
+		      ah->paprd_ratemask_ht40);
+
+	for (i = 0; i < ah->caps.max_txchains; i++) {
 		REG_RMW_FIELD(ah, ctrl0[i],
 			      AR_PHY_PAPRD_CTRL0_USE_SINGLE_TABLE_MASK, 1);
 		REG_RMW_FIELD(ah, ctrl1[i],
@@ -102,8 +181,14 @@ static void ar9003_paprd_setup_single_table(struct ath_hw *ah)
 		      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_NUM_CORR_STAGES, 7);
 	REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
 		      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_MIN_LOOPBACK_DEL, 1);
-	REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
-		      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP, -6);
+	if (AR_SREV_9485(ah))
+		REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
+			      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP,
+			      -3);
+	else
+		REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
+			      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP,
+			      -6);
 	REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3,
 		      AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_ADC_DESIRED_SIZE,
 		      -15);
@@ -132,6 +217,7 @@ static void ar9003_paprd_setup_single_table(struct ath_hw *ah)
 		      AR_PHY_PAPRD_PRE_POST_SCALING, 185706);
 	REG_RMW_FIELD(ah, AR_PHY_PAPRD_PRE_POST_SCALE_7_B0,
 		      AR_PHY_PAPRD_PRE_POST_SCALING, 175487);
+	return 0;
 }
 
 static void ar9003_paprd_get_gain_table(struct ath_hw *ah)
@@ -586,15 +672,10 @@ void ar9003_paprd_populate_single_table(struct ath_hw *ah,
 {
 	u32 *paprd_table_val = caldata->pa_table[chain];
 	u32 small_signal_gain = caldata->small_signal_gain[chain];
-	u32 training_power;
+	u32 training_power = ah->paprd_training_power;
 	u32 reg = 0;
 	int i;
 
-	training_power =
-	    REG_READ_FIELD(ah, AR_PHY_POWERTX_RATE5,
-			   AR_PHY_POWERTX_RATE5_POWERTXHT20_0);
-	training_power -= 4;
-
 	if (chain == 0)
 		reg = AR_PHY_PAPRD_MEM_TAB_B0;
 	else if (chain == 1)
@@ -620,26 +701,22 @@ void ar9003_paprd_populate_single_table(struct ath_hw *ah,
 		      AR_PHY_PAPRD_CTRL1_PAPRD_POWER_AT_AM2AM_CAL,
 		      training_power);
 
-	REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL1_B1,
-		      AR_PHY_PAPRD_CTRL1_PAPRD_POWER_AT_AM2AM_CAL,
-		      training_power);
+	if (ah->caps.tx_chainmask & BIT(1))
+		REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL1_B1,
+			      AR_PHY_PAPRD_CTRL1_PAPRD_POWER_AT_AM2AM_CAL,
+			      training_power);
 
-	REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL1_B2,
-		      AR_PHY_PAPRD_CTRL1_PAPRD_POWER_AT_AM2AM_CAL,
-		      training_power);
+	if (ah->caps.tx_chainmask & BIT(2))
+		REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL1_B2,
+			      AR_PHY_PAPRD_CTRL1_PAPRD_POWER_AT_AM2AM_CAL,
+			      training_power);
 }
 EXPORT_SYMBOL(ar9003_paprd_populate_single_table);
 
 int ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain)
 {
-
 	unsigned int i, desired_gain, gain_index;
-	unsigned int train_power;
-
-	train_power = REG_READ_FIELD(ah, AR_PHY_POWERTX_RATE5,
-				     AR_PHY_POWERTX_RATE5_POWERTXHT20_0);
-
-	train_power = train_power - 4;
+	unsigned int train_power = ah->paprd_training_power;
 
 	desired_gain = ar9003_get_desired_gain(ah, chain, train_power);
 
@@ -705,7 +782,12 @@ EXPORT_SYMBOL(ar9003_paprd_create_curve);
 
 int ar9003_paprd_init_table(struct ath_hw *ah)
 {
-	ar9003_paprd_setup_single_table(ah);
+	int ret;
+
+	ret = ar9003_paprd_setup_single_table(ah);
+	if (ret < 0)
+	    return ret;
+
 	ar9003_paprd_get_gain_table(ah);
 	return 0;
 }
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 669b777729b..8d60f4f09ac 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -75,7 +75,10 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 	freq = centers.synth_center;
 
 	if (freq < 4800) {     /* 2 GHz, fractional mode */
-		channelSel = CHANSEL_2G(freq);
+		if (AR_SREV_9485(ah))
+			channelSel = CHANSEL_2G_9485(freq);
+		else
+			channelSel = CHANSEL_2G(freq);
 		/* Set to 2G mode */
 		bMode = 1;
 	} else {
@@ -128,24 +131,53 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 static void ar9003_hw_spur_mitigate_mrc_cck(struct ath_hw *ah,
 					    struct ath9k_channel *chan)
 {
-	u32 spur_freq[4] = { 2420, 2440, 2464, 2480 };
+	static const u32 spur_freq[4] = { 2420, 2440, 2464, 2480 };
 	int cur_bb_spur, negative = 0, cck_spur_freq;
 	int i;
+	int range, max_spur_cnts, synth_freq;
+	u8 *spur_fbin_ptr = NULL;
 
 	/*
 	 * Need to verify range +/- 10 MHz in control channel, otherwise spur
 	 * is out-of-band and can be ignored.
 	 */
 
-	for (i = 0; i < 4; i++) {
+	if (AR_SREV_9485(ah)) {
+		spur_fbin_ptr = ar9003_get_spur_chan_ptr(ah,
+							 IS_CHAN_2GHZ(chan));
+		if (spur_fbin_ptr[0] == 0) /* No spur */
+			return;
+		max_spur_cnts = 5;
+		if (IS_CHAN_HT40(chan)) {
+			range = 19;
+			if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL,
+					   AR_PHY_GC_DYN2040_PRI_CH) == 0)
+				synth_freq = chan->channel + 10;
+			else
+				synth_freq = chan->channel - 10;
+		} else {
+			range = 10;
+			synth_freq = chan->channel;
+		}
+	} else {
+		range = 10;
+		max_spur_cnts = 4;
+		synth_freq = chan->channel;
+	}
+
+	for (i = 0; i < max_spur_cnts; i++) {
 		negative = 0;
-		cur_bb_spur = spur_freq[i] - chan->channel;
+		if (AR_SREV_9485(ah))
+			cur_bb_spur = FBIN2FREQ(spur_fbin_ptr[i],
+					IS_CHAN_2GHZ(chan)) - synth_freq;
+		else
+			cur_bb_spur = spur_freq[i] - synth_freq;
 
 		if (cur_bb_spur < 0) {
 			negative = 1;
 			cur_bb_spur = -cur_bb_spur;
 		}
-		if (cur_bb_spur < 10) {
+		if (cur_bb_spur < range) {
 			cck_spur_freq = (int)((cur_bb_spur << 19) / 11);
 
 			if (negative == 1)
@@ -487,7 +519,11 @@ void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
 		break;
 	}
 
-	REG_WRITE(ah, AR_SELFGEN_MASK, tx);
+	if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && (tx == 0x7))
+		REG_WRITE(ah, AR_SELFGEN_MASK, 0x3);
+	else
+		REG_WRITE(ah, AR_SELFGEN_MASK, tx);
+
 	if (tx == 0x5) {
 		REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP,
 			    AR_PHY_SWAP_ALT_CHAIN);
@@ -542,10 +578,7 @@ static void ar9003_hw_prog_ini(struct ath_hw *ah,
 		u32 reg = INI_RA(iniArr, i, 0);
 		u32 val = INI_RA(iniArr, i, column);
 
-		if (reg >= 0x16000 && reg < 0x17000)
-			ath9k_hw_analog_shift_regwrite(ah, reg, val);
-		else
-			REG_WRITE(ah, reg, val);
+		REG_WRITE(ah, reg, val);
 
 		DO_DELAY(regWrites);
 	}
@@ -614,7 +647,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah,
 				 channel->max_antenna_gain * 2,
 				 channel->max_power * 2,
 				 min((u32) MAX_RATE_POWER,
-				 (u32) regulatory->power_limit));
+				 (u32) regulatory->power_limit), false);
 
 	return 0;
 }
@@ -712,28 +745,6 @@ static void ar9003_hw_rfbus_done(struct ath_hw *ah)
 	REG_WRITE(ah, AR_PHY_RFBUS_REQ, 0);
 }
 
-/*
- * Set the interrupt and GPIO values so the ISR can disable RF
- * on a switch signal.  Assumes GPIO port and interrupt polarity
- * are set prior to call.
- */
-static void ar9003_hw_enable_rfkill(struct ath_hw *ah)
-{
-	/* Connect rfsilent_bb_l to baseband */
-	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-		    AR_GPIO_INPUT_EN_VAL_RFSILENT_BB);
-	/* Set input mux for rfsilent_bb_l to GPIO #0 */
-	REG_CLR_BIT(ah, AR_GPIO_INPUT_MUX2,
-		    AR_GPIO_INPUT_MUX2_RFSILENT);
-
-	/*
-	 * Configure the desired GPIO port for input and
-	 * enable baseband rf silence.
-	 */
-	ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
-	REG_SET_BIT(ah, AR_PHY_TEST, RFSILENT_BB);
-}
-
 static void ar9003_hw_set_diversity(struct ath_hw *ah, bool value)
 {
 	u32 v = REG_READ(ah, AR_PHY_CCK_DETECT);
@@ -820,12 +831,12 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 				    AR_PHY_SFCORR_LOW_USE_SELF_CORR_LOW);
 
 		if (!on != aniState->ofdmWeakSigDetectOff) {
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: ofdm weak signal: %s=>%s\n",
-				  chan->channel,
-				  !aniState->ofdmWeakSigDetectOff ?
-					"on" : "off",
-				  on ? "on" : "off");
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: ofdm weak signal: %s=>%s\n",
+				chan->channel,
+				!aniState->ofdmWeakSigDetectOff ?
+				"on" : "off",
+				on ? "on" : "off");
 			if (on)
 				ah->stats.ast_ani_ofdmon++;
 			else
@@ -838,11 +849,9 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(firstep_table)) {
-			ath_print(common, ATH_DBG_ANI,
-				  "ATH9K_ANI_FIRSTEP_LEVEL: level "
-				  "out of range (%u > %u)\n",
-				  level,
-				  (unsigned) ARRAY_SIZE(firstep_table));
+			ath_dbg(common, ATH_DBG_ANI,
+				"ATH9K_ANI_FIRSTEP_LEVEL: level out of range (%u > %zu)\n",
+				level, ARRAY_SIZE(firstep_table));
 			return false;
 		}
 
@@ -877,24 +886,22 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 			      AR_PHY_FIND_SIG_LOW_FIRSTEP_LOW, value2);
 
 		if (level != aniState->firstepLevel) {
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: level %d=>%d[def:%d] "
-				  "firstep[level]=%d ini=%d\n",
-				  chan->channel,
-				  aniState->firstepLevel,
-				  level,
-				  ATH9K_ANI_FIRSTEP_LVL_NEW,
-				  value,
-				  aniState->iniDef.firstep);
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: level %d=>%d[def:%d] "
-				  "firstep_low[level]=%d ini=%d\n",
-				  chan->channel,
-				  aniState->firstepLevel,
-				  level,
-				  ATH9K_ANI_FIRSTEP_LVL_NEW,
-				  value2,
-				  aniState->iniDef.firstepLow);
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: level %d=>%d[def:%d] firstep[level]=%d ini=%d\n",
+				chan->channel,
+				aniState->firstepLevel,
+				level,
+				ATH9K_ANI_FIRSTEP_LVL_NEW,
+				value,
+				aniState->iniDef.firstep);
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: level %d=>%d[def:%d] firstep_low[level]=%d ini=%d\n",
+				chan->channel,
+				aniState->firstepLevel,
+				level,
+				ATH9K_ANI_FIRSTEP_LVL_NEW,
+				value2,
+				aniState->iniDef.firstepLow);
 			if (level > aniState->firstepLevel)
 				ah->stats.ast_ani_stepup++;
 			else if (level < aniState->firstepLevel)
@@ -907,11 +914,9 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(cycpwrThr1_table)) {
-			ath_print(common, ATH_DBG_ANI,
-				  "ATH9K_ANI_SPUR_IMMUNITY_LEVEL: level "
-				  "out of range (%u > %u)\n",
-				  level,
-				  (unsigned) ARRAY_SIZE(cycpwrThr1_table));
+			ath_dbg(common, ATH_DBG_ANI,
+				"ATH9K_ANI_SPUR_IMMUNITY_LEVEL: level out of range (%u > %zu)\n",
+				level, ARRAY_SIZE(cycpwrThr1_table));
 			return false;
 		}
 		/*
@@ -945,24 +950,22 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 			      AR_PHY_EXT_CYCPWR_THR1, value2);
 
 		if (level != aniState->spurImmunityLevel) {
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: level %d=>%d[def:%d] "
-				  "cycpwrThr1[level]=%d ini=%d\n",
-				  chan->channel,
-				  aniState->spurImmunityLevel,
-				  level,
-				  ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
-				  value,
-				  aniState->iniDef.cycpwrThr1);
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: level %d=>%d[def:%d] "
-				  "cycpwrThr1Ext[level]=%d ini=%d\n",
-				  chan->channel,
-				  aniState->spurImmunityLevel,
-				  level,
-				  ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
-				  value2,
-				  aniState->iniDef.cycpwrThr1Ext);
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: level %d=>%d[def:%d] cycpwrThr1[level]=%d ini=%d\n",
+				chan->channel,
+				aniState->spurImmunityLevel,
+				level,
+				ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
+				value,
+				aniState->iniDef.cycpwrThr1);
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: level %d=>%d[def:%d] cycpwrThr1Ext[level]=%d ini=%d\n",
+				chan->channel,
+				aniState->spurImmunityLevel,
+				level,
+				ATH9K_ANI_SPUR_IMMUNE_LVL_NEW,
+				value2,
+				aniState->iniDef.cycpwrThr1Ext);
 			if (level > aniState->spurImmunityLevel)
 				ah->stats.ast_ani_spurup++;
 			else if (level < aniState->spurImmunityLevel)
@@ -982,11 +985,11 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 		REG_RMW_FIELD(ah, AR_PHY_MRC_CCK_CTRL,
 			      AR_PHY_MRC_CCK_MUX_REG, is_on);
 		if (!is_on != aniState->mrcCCKOff) {
-			ath_print(common, ATH_DBG_ANI,
-				  "** ch %d: MRC CCK: %s=>%s\n",
-				  chan->channel,
-				  !aniState->mrcCCKOff ? "on" : "off",
-				  is_on ? "on" : "off");
+			ath_dbg(common, ATH_DBG_ANI,
+				"** ch %d: MRC CCK: %s=>%s\n",
+				chan->channel,
+				!aniState->mrcCCKOff ? "on" : "off",
+				is_on ? "on" : "off");
 		if (is_on)
 			ah->stats.ast_ani_ccklow++;
 		else
@@ -998,22 +1001,19 @@ static bool ar9003_hw_ani_control(struct ath_hw *ah,
 	case ATH9K_ANI_PRESENT:
 		break;
 	default:
-		ath_print(common, ATH_DBG_ANI,
-			  "invalid cmd %u\n", cmd);
+		ath_dbg(common, ATH_DBG_ANI, "invalid cmd %u\n", cmd);
 		return false;
 	}
 
-	ath_print(common, ATH_DBG_ANI,
-		  "ANI parameters: SI=%d, ofdmWS=%s FS=%d "
-		  "MRCcck=%s listenTime=%d "
-		  "ofdmErrs=%d cckErrs=%d\n",
-		  aniState->spurImmunityLevel,
-		  !aniState->ofdmWeakSigDetectOff ? "on" : "off",
-		  aniState->firstepLevel,
-		  !aniState->mrcCCKOff ? "on" : "off",
-		  aniState->listenTime,
-		  aniState->ofdmPhyErrCount,
-		  aniState->cckPhyErrCount);
+	ath_dbg(common, ATH_DBG_ANI,
+		"ANI parameters: SI=%d, ofdmWS=%s FS=%d MRCcck=%s listenTime=%d ofdmErrs=%d cckErrs=%d\n",
+		aniState->spurImmunityLevel,
+		!aniState->ofdmWeakSigDetectOff ? "on" : "off",
+		aniState->firstepLevel,
+		!aniState->mrcCCKOff ? "on" : "off",
+		aniState->listenTime,
+		aniState->ofdmPhyErrCount,
+		aniState->cckPhyErrCount);
 	return true;
 }
 
@@ -1023,25 +1023,25 @@ static void ar9003_hw_do_getnf(struct ath_hw *ah,
 	int16_t nf;
 
 	nf = MS(REG_READ(ah, AR_PHY_CCA_0), AR_PHY_MINCCA_PWR);
-	nfarray[0] = sign_extend(nf, 9);
+	nfarray[0] = sign_extend32(nf, 8);
 
 	nf = MS(REG_READ(ah, AR_PHY_CCA_1), AR_PHY_CH1_MINCCA_PWR);
-	nfarray[1] = sign_extend(nf, 9);
+	nfarray[1] = sign_extend32(nf, 8);
 
 	nf = MS(REG_READ(ah, AR_PHY_CCA_2), AR_PHY_CH2_MINCCA_PWR);
-	nfarray[2] = sign_extend(nf, 9);
+	nfarray[2] = sign_extend32(nf, 8);
 
 	if (!IS_CHAN_HT40(ah->curchan))
 		return;
 
 	nf = MS(REG_READ(ah, AR_PHY_EXT_CCA), AR_PHY_EXT_MINCCA_PWR);
-	nfarray[3] = sign_extend(nf, 9);
+	nfarray[3] = sign_extend32(nf, 8);
 
 	nf = MS(REG_READ(ah, AR_PHY_EXT_CCA_1), AR_PHY_CH1_EXT_MINCCA_PWR);
-	nfarray[4] = sign_extend(nf, 9);
+	nfarray[4] = sign_extend32(nf, 8);
 
 	nf = MS(REG_READ(ah, AR_PHY_EXT_CCA_2), AR_PHY_CH2_EXT_MINCCA_PWR);
-	nfarray[5] = sign_extend(nf, 9);
+	nfarray[5] = sign_extend32(nf, 8);
 }
 
 static void ar9003_hw_set_nf_limits(struct ath_hw *ah)
@@ -1070,13 +1070,13 @@ static void ar9003_hw_ani_cache_ini_regs(struct ath_hw *ah)
 	aniState = &ah->curchan->ani;
 	iniDef = &aniState->iniDef;
 
-	ath_print(common, ATH_DBG_ANI,
-		  "ver %d.%d opmode %u chan %d Mhz/0x%x\n",
-		  ah->hw_version.macVersion,
-		  ah->hw_version.macRev,
-		  ah->opmode,
-		  chan->channel,
-		  chan->channelFlags);
+	ath_dbg(common, ATH_DBG_ANI,
+		"ver %d.%d opmode %u chan %d Mhz/0x%x\n",
+		ah->hw_version.macVersion,
+		ah->hw_version.macRev,
+		ah->opmode,
+		chan->channel,
+		chan->channelFlags);
 
 	val = REG_READ(ah, AR_PHY_SFCORR);
 	iniDef->m1Thresh = MS(val, AR_PHY_SFCORR_M1_THRESH);
@@ -1113,10 +1113,55 @@ static void ar9003_hw_ani_cache_ini_regs(struct ath_hw *ah)
 	aniState->mrcCCKOff = !ATH9K_ANI_ENABLE_MRC_CCK;
 }
 
+static void ar9003_hw_set_radar_params(struct ath_hw *ah,
+				       struct ath_hw_radar_conf *conf)
+{
+	u32 radar_0 = 0, radar_1 = 0;
+
+	if (!conf) {
+		REG_CLR_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_ENA);
+		return;
+	}
+
+	radar_0 |= AR_PHY_RADAR_0_ENA | AR_PHY_RADAR_0_FFT_ENA;
+	radar_0 |= SM(conf->fir_power, AR_PHY_RADAR_0_FIRPWR);
+	radar_0 |= SM(conf->radar_rssi, AR_PHY_RADAR_0_RRSSI);
+	radar_0 |= SM(conf->pulse_height, AR_PHY_RADAR_0_HEIGHT);
+	radar_0 |= SM(conf->pulse_rssi, AR_PHY_RADAR_0_PRSSI);
+	radar_0 |= SM(conf->pulse_inband, AR_PHY_RADAR_0_INBAND);
+
+	radar_1 |= AR_PHY_RADAR_1_MAX_RRSSI;
+	radar_1 |= AR_PHY_RADAR_1_BLOCK_CHECK;
+	radar_1 |= SM(conf->pulse_maxlen, AR_PHY_RADAR_1_MAXLEN);
+	radar_1 |= SM(conf->pulse_inband_step, AR_PHY_RADAR_1_RELSTEP_THRESH);
+	radar_1 |= SM(conf->radar_inband, AR_PHY_RADAR_1_RELPWR_THRESH);
+
+	REG_WRITE(ah, AR_PHY_RADAR_0, radar_0);
+	REG_WRITE(ah, AR_PHY_RADAR_1, radar_1);
+	if (conf->ext_channel)
+		REG_SET_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA);
+	else
+		REG_CLR_BIT(ah, AR_PHY_RADAR_EXT, AR_PHY_RADAR_EXT_ENA);
+}
+
+static void ar9003_hw_set_radar_conf(struct ath_hw *ah)
+{
+	struct ath_hw_radar_conf *conf = &ah->radar_conf;
+
+	conf->fir_power = -28;
+	conf->radar_rssi = 0;
+	conf->pulse_height = 10;
+	conf->pulse_rssi = 24;
+	conf->pulse_inband = 8;
+	conf->pulse_maxlen = 255;
+	conf->pulse_inband_step = 12;
+	conf->radar_inband = 8;
+}
+
 void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
 {
 	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
-	const u32 ar9300_cca_regs[6] = {
+	static const u32 ar9300_cca_regs[6] = {
 		AR_PHY_CCA_0,
 		AR_PHY_CCA_1,
 		AR_PHY_CCA_2,
@@ -1136,13 +1181,14 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah)
 	priv_ops->set_delta_slope = ar9003_hw_set_delta_slope;
 	priv_ops->rfbus_req = ar9003_hw_rfbus_req;
 	priv_ops->rfbus_done = ar9003_hw_rfbus_done;
-	priv_ops->enable_rfkill = ar9003_hw_enable_rfkill;
 	priv_ops->set_diversity = ar9003_hw_set_diversity;
 	priv_ops->ani_control = ar9003_hw_ani_control;
 	priv_ops->do_getnf = ar9003_hw_do_getnf;
 	priv_ops->ani_cache_ini_regs = ar9003_hw_ani_cache_ini_regs;
+	priv_ops->set_radar_params = ar9003_hw_set_radar_params;
 
 	ar9003_hw_set_nf_limits(ah);
+	ar9003_hw_set_radar_conf(ah);
 	memcpy(ah->nf_regs, ar9300_cca_regs, sizeof(ah->nf_regs));
 }
 
@@ -1165,7 +1211,7 @@ void ar9003_hw_bb_watchdog_config(struct ath_hw *ah)
 			  ~(AR_PHY_WATCHDOG_NON_IDLE_ENABLE |
 			    AR_PHY_WATCHDOG_IDLE_ENABLE));
 
-		ath_print(common, ATH_DBG_RESET, "Disabled BB Watchdog\n");
+		ath_dbg(common, ATH_DBG_RESET, "Disabled BB Watchdog\n");
 		return;
 	}
 
@@ -1201,9 +1247,9 @@ void ar9003_hw_bb_watchdog_config(struct ath_hw *ah)
 		  AR_PHY_WATCHDOG_IDLE_MASK |
 		  (AR_PHY_WATCHDOG_NON_IDLE_MASK & (idle_count << 2)));
 
-	ath_print(common, ATH_DBG_RESET,
-		  "Enabled BB Watchdog timeout (%u ms)\n",
-		  idle_tmo_ms);
+	ath_dbg(common, ATH_DBG_RESET,
+		"Enabled BB Watchdog timeout (%u ms)\n",
+		idle_tmo_ms);
 }
 
 void ar9003_hw_bb_watchdog_read(struct ath_hw *ah)
@@ -1231,37 +1277,35 @@ void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah)
 		return;
 
 	status = ah->bb_watchdog_last_status;
-	ath_print(common, ATH_DBG_RESET,
-		  "\n==== BB update: BB status=0x%08x ====\n", status);
-	ath_print(common, ATH_DBG_RESET,
-		  "** BB state: wd=%u det=%u rdar=%u rOFDM=%d "
-		  "rCCK=%u tOFDM=%u tCCK=%u agc=%u src=%u **\n",
-		  MS(status, AR_PHY_WATCHDOG_INFO),
-		  MS(status, AR_PHY_WATCHDOG_DET_HANG),
-		  MS(status, AR_PHY_WATCHDOG_RADAR_SM),
-		  MS(status, AR_PHY_WATCHDOG_RX_OFDM_SM),
-		  MS(status, AR_PHY_WATCHDOG_RX_CCK_SM),
-		  MS(status, AR_PHY_WATCHDOG_TX_OFDM_SM),
-		  MS(status, AR_PHY_WATCHDOG_TX_CCK_SM),
-		  MS(status, AR_PHY_WATCHDOG_AGC_SM),
-		  MS(status,AR_PHY_WATCHDOG_SRCH_SM));
-
-	ath_print(common, ATH_DBG_RESET,
-		  "** BB WD cntl: cntl1=0x%08x cntl2=0x%08x **\n",
-		  REG_READ(ah, AR_PHY_WATCHDOG_CTL_1),
-		  REG_READ(ah, AR_PHY_WATCHDOG_CTL_2));
-	ath_print(common, ATH_DBG_RESET,
-		  "** BB mode: BB_gen_controls=0x%08x **\n",
-		  REG_READ(ah, AR_PHY_GEN_CTRL));
+	ath_dbg(common, ATH_DBG_RESET,
+		"\n==== BB update: BB status=0x%08x ====\n", status);
+	ath_dbg(common, ATH_DBG_RESET,
+		"** BB state: wd=%u det=%u rdar=%u rOFDM=%d rCCK=%u tOFDM=%u tCCK=%u agc=%u src=%u **\n",
+		MS(status, AR_PHY_WATCHDOG_INFO),
+		MS(status, AR_PHY_WATCHDOG_DET_HANG),
+		MS(status, AR_PHY_WATCHDOG_RADAR_SM),
+		MS(status, AR_PHY_WATCHDOG_RX_OFDM_SM),
+		MS(status, AR_PHY_WATCHDOG_RX_CCK_SM),
+		MS(status, AR_PHY_WATCHDOG_TX_OFDM_SM),
+		MS(status, AR_PHY_WATCHDOG_TX_CCK_SM),
+		MS(status, AR_PHY_WATCHDOG_AGC_SM),
+		MS(status, AR_PHY_WATCHDOG_SRCH_SM));
+
+	ath_dbg(common, ATH_DBG_RESET,
+		"** BB WD cntl: cntl1=0x%08x cntl2=0x%08x **\n",
+		REG_READ(ah, AR_PHY_WATCHDOG_CTL_1),
+		REG_READ(ah, AR_PHY_WATCHDOG_CTL_2));
+	ath_dbg(common, ATH_DBG_RESET,
+		"** BB mode: BB_gen_controls=0x%08x **\n",
+		REG_READ(ah, AR_PHY_GEN_CTRL));
 
 #define PCT(_field) (common->cc_survey._field * 100 / common->cc_survey.cycles)
 	if (common->cc_survey.cycles)
-		ath_print(common, ATH_DBG_RESET,
-			  "** BB busy times: rx_clear=%d%%, "
-			  "rx_frame=%d%%, tx_frame=%d%% **\n",
-			  PCT(rx_busy), PCT(rx_frame), PCT(tx_frame));
+		ath_dbg(common, ATH_DBG_RESET,
+			"** BB busy times: rx_clear=%d%%, rx_frame=%d%%, tx_frame=%d%% **\n",
+			PCT(rx_busy), PCT(rx_frame), PCT(tx_frame));
 
-	ath_print(common, ATH_DBG_RESET,
-		  "==== BB update: done ====\n\n");
+	ath_dbg(common, ATH_DBG_RESET,
+		"==== BB update: done ====\n\n");
 }
 EXPORT_SYMBOL(ar9003_hw_bb_watchdog_dbg_info);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
index 3394dfe52b4..59bab6bd8a7 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h
@@ -260,7 +260,13 @@
 #define AR_PHY_CCA_0            (AR_AGC_BASE + 0x1c)
 #define AR_PHY_EXT_CCA0         (AR_AGC_BASE + 0x20)
 #define AR_PHY_RESTART          (AR_AGC_BASE + 0x24)
+
 #define AR_PHY_MC_GAIN_CTRL     (AR_AGC_BASE + 0x28)
+#define AR_ANT_DIV_CTRL_ALL	0x7e000000
+#define AR_ANT_DIV_CTRL_ALL_S	25
+#define AR_ANT_DIV_ENABLE	0x1000000
+#define AR_ANT_DIV_ENABLE_S	24
+
 #define AR_PHY_EXTCHN_PWRTHR1   (AR_AGC_BASE + 0x2c)
 #define AR_PHY_EXT_CHN_WIN      (AR_AGC_BASE + 0x30)
 #define AR_PHY_20_40_DET_THR    (AR_AGC_BASE + 0x34)
@@ -271,7 +277,11 @@
 #define AR_PHY_RX_GAIN_BOUNDS_2 (AR_AGC_BASE + 0x48)
 #define AR_PHY_RSSI_0           (AR_AGC_BASE + 0x180)
 #define AR_PHY_SPUR_CCK_REP0    (AR_AGC_BASE + 0x184)
+
 #define AR_PHY_CCK_DETECT       (AR_AGC_BASE + 0x1c0)
+#define AR_FAST_DIV_ENABLE	0x2000
+#define AR_FAST_DIV_ENABLE_S	13
+
 #define AR_PHY_DAG_CTRLCCK      (AR_AGC_BASE + 0x1c4)
 #define AR_PHY_IQCORR_CTRL_CCK  (AR_AGC_BASE + 0x1c8)
 
@@ -536,10 +546,18 @@
 
 #define AR_PHY_TXGAIN_TABLE      (AR_SM_BASE + 0x300)
 
+#define AR_PHY_TX_IQCAL_START_9485		(AR_SM_BASE + 0x3c4)
+#define AR_PHY_TX_IQCAL_START_DO_CAL_9485	0x80000000
+#define AR_PHY_TX_IQCAL_START_DO_CAL_9485_S	31
+#define AR_PHY_TX_IQCAL_CONTROL_1_9485		(AR_SM_BASE + 0x3c8)
+#define AR_PHY_TX_IQCAL_STATUS_B0_9485		(AR_SM_BASE + 0x3f0)
+
 #define AR_PHY_TX_IQCAL_CONTROL_1   (AR_SM_BASE + 0x448)
 #define AR_PHY_TX_IQCAL_START       (AR_SM_BASE + 0x440)
 #define AR_PHY_TX_IQCAL_STATUS_B0   (AR_SM_BASE + 0x48c)
-#define AR_PHY_TX_IQCAL_CORR_COEFF_01_B0    (AR_SM_BASE + 0x450)
+#define AR_PHY_TX_IQCAL_CORR_COEFF_B0(_i)    (AR_SM_BASE + \
+					     (AR_SREV_9485(ah) ? \
+					      0x3d0 : 0x450) + ((_i) << 2))
 
 #define AR_PHY_WATCHDOG_STATUS      (AR_SM_BASE + 0x5c0)
 #define AR_PHY_WATCHDOG_CTL_1       (AR_SM_BASE + 0x5c4)
@@ -568,7 +586,7 @@
 #define AR_PHY_65NM_CH0_BIAS2       0x160c4
 #define AR_PHY_65NM_CH0_BIAS4       0x160cc
 #define AR_PHY_65NM_CH0_RXTX4       0x1610c
-#define AR_PHY_65NM_CH0_THERM       0x16290
+#define AR_PHY_65NM_CH0_THERM       (AR_SREV_9485(ah) ? 0x1628c : 0x16290)
 
 #define AR_PHY_65NM_CH0_THERM_LOCAL   0x80000000
 #define AR_PHY_65NM_CH0_THERM_LOCAL_S 31
@@ -584,6 +602,24 @@
 #define AR_PHY_65NM_CH2_RXTX1       0x16900
 #define AR_PHY_65NM_CH2_RXTX2       0x16904
 
+#define AR_CH0_TOP2 (AR_SREV_9485(ah) ? 0x00016284 : 0x0001628c)
+#define AR_CH0_TOP2_XPABIASLVL		0xf000
+#define AR_CH0_TOP2_XPABIASLVL_S	12
+
+#define AR_CH0_XTAL		(AR_SREV_9485(ah) ? 0x16290 : 0x16294)
+#define AR_CH0_XTAL_CAPINDAC	0x7f000000
+#define AR_CH0_XTAL_CAPINDAC_S	24
+#define AR_CH0_XTAL_CAPOUTDAC	0x00fe0000
+#define AR_CH0_XTAL_CAPOUTDAC_S	17
+
+#define AR_PHY_PMU1		0x16c40
+#define AR_PHY_PMU1_PWD		0x1
+#define AR_PHY_PMU1_PWD_S	0
+
+#define AR_PHY_PMU2		0x16c44
+#define AR_PHY_PMU2_PGM		0x00200000
+#define AR_PHY_PMU2_PGM_S	21
+
 #define AR_PHY_RX1DB_BIQUAD_LONG_SHIFT		0x00380000
 #define AR_PHY_RX1DB_BIQUAD_LONG_SHIFT_S	19
 #define AR_PHY_RX6DB_BIQUAD_LONG_SHIFT		0x00c00000
@@ -683,6 +719,7 @@
 #define AR_PHY_TPCGR1_FORCED_DAC_GAIN_S 1
 #define AR_PHY_TPCGR1_FORCE_DAC_GAIN    0x00000001
 #define AR_PHY_TXGAIN_FORCE               0x00000001
+#define AR_PHY_TXGAIN_FORCE_S		  0
 #define AR_PHY_TXGAIN_FORCED_PADVGNRA     0x00003c00
 #define AR_PHY_TXGAIN_FORCED_PADVGNRA_S   10
 #define AR_PHY_TXGAIN_FORCED_PADVGNRB     0x0003c000
@@ -725,8 +762,13 @@
 #define AR_PHY_TX_IQCAL_START_DO_CAL_S      0
 
 #define AR_PHY_TX_IQCAL_STATUS_FAILED    0x00000001
-#define AR_PHY_TX_IQCAL_CORR_COEFF_01_COEFF_TABLE      0x00003fff
-#define AR_PHY_TX_IQCAL_CORR_COEFF_01_COEFF_TABLE_S    0
+#define AR_PHY_CALIBRATED_GAINS_0	 0x3e
+#define AR_PHY_CALIBRATED_GAINS_0_S	 1
+
+#define AR_PHY_TX_IQCAL_CORR_COEFF_00_COEFF_TABLE      0x00003fff
+#define AR_PHY_TX_IQCAL_CORR_COEFF_00_COEFF_TABLE_S    0
+#define AR_PHY_TX_IQCAL_CORR_COEFF_01_COEFF_TABLE      0x0fffc000
+#define AR_PHY_TX_IQCAL_CORR_COEFF_01_COEFF_TABLE_S    14
 
 #define AR_PHY_65NM_CH0_RXTX4_THERM_ON          0x10000000
 #define AR_PHY_65NM_CH0_RXTX4_THERM_ON_S        28
@@ -785,7 +827,7 @@
 #define AR_PHY_TPC_11_B1         (AR_SM1_BASE + 0x220)
 #define AR_PHY_PDADC_TAB_1       (AR_SM1_BASE + 0x240)
 #define AR_PHY_TX_IQCAL_STATUS_B1   (AR_SM1_BASE + 0x48c)
-#define AR_PHY_TX_IQCAL_CORR_COEFF_01_B1    (AR_SM1_BASE + 0x450)
+#define AR_PHY_TX_IQCAL_CORR_COEFF_B1(_i)    (AR_SM_BASE + 0x450 + ((_i) << 2))
 
 /*
  * Channel 2 Register Map
@@ -838,7 +880,7 @@
 #define AR_PHY_TPC_11_B2         (AR_SM2_BASE + 0x220)
 #define AR_PHY_PDADC_TAB_2       (AR_SM2_BASE + 0x240)
 #define AR_PHY_TX_IQCAL_STATUS_B2   (AR_SM2_BASE + 0x48c)
-#define AR_PHY_TX_IQCAL_CORR_COEFF_01_B2    (AR_SM2_BASE + 0x450)
+#define AR_PHY_TX_IQCAL_CORR_COEFF_B2(_i)    (AR_SM2_BASE + 0x450 + ((_i) << 2))
 
 #define AR_PHY_TX_IQCAL_STATUS_B2_FAILED    0x00000001
 
@@ -945,7 +987,9 @@
 #define AR_PHY_PAPRD_CTRL1_PAPRD_MAG_SCALE_FACT		0x0ffe0000
 #define AR_PHY_PAPRD_CTRL1_PAPRD_MAG_SCALE_FACT_S	17
 
-#define AR_PHY_PAPRD_TRAINER_CNTL1				(AR_SM_BASE + 0x490)
+#define AR_PHY_PAPRD_TRAINER_CNTL1				(AR_SM_BASE + \
+								 (AR_SREV_9485(ah) ? \
+								  0x580 : 0x490))
 #define AR_PHY_PAPRD_TRAINER_CNTL1_CF_CF_PAPRD_TRAIN_ENABLE	0x00000001
 #define AR_PHY_PAPRD_TRAINER_CNTL1_CF_CF_PAPRD_TRAIN_ENABLE_S	0
 #define AR_PHY_PAPRD_TRAINER_CNTL1_CF_PAPRD_AGC2_SETTLING	0x0000007e
@@ -961,11 +1005,15 @@
 #define AR_PHY_PAPRD_TRAINER_CNTL1_CF_PAPRD_LB_SKIP		0x0003f000
 #define AR_PHY_PAPRD_TRAINER_CNTL1_CF_PAPRD_LB_SKIP_S		12
 
-#define AR_PHY_PAPRD_TRAINER_CNTL2				(AR_SM_BASE + 0x494)
+#define AR_PHY_PAPRD_TRAINER_CNTL2				(AR_SM_BASE + \
+								 (AR_SREV_9485(ah) ? \
+								  0x584 : 0x494))
 #define AR_PHY_PAPRD_TRAINER_CNTL2_CF_PAPRD_INIT_RX_BB_GAIN	0xFFFFFFFF
 #define AR_PHY_PAPRD_TRAINER_CNTL2_CF_PAPRD_INIT_RX_BB_GAIN_S	0
 
-#define AR_PHY_PAPRD_TRAINER_CNTL3				(AR_SM_BASE + 0x498)
+#define AR_PHY_PAPRD_TRAINER_CNTL3				(AR_SM_BASE + \
+								 (AR_SREV_9485(ah) ? \
+								  0x588 : 0x498))
 #define AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_ADC_DESIRED_SIZE	0x0000003f
 #define AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_ADC_DESIRED_SIZE_S	0
 #define AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP		0x00000fc0
@@ -981,7 +1029,9 @@
 #define AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_BBTXMIX_DISABLE	0x20000000
 #define AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_BBTXMIX_DISABLE_S	29
 
-#define AR_PHY_PAPRD_TRAINER_CNTL4				(AR_SM_BASE + 0x49c)
+#define AR_PHY_PAPRD_TRAINER_CNTL4				(AR_SM_BASE + \
+								 (AR_SREV_9485(ah) ? \
+								  0x58c : 0x49c))
 #define AR_PHY_PAPRD_TRAINER_CNTL4_CF_PAPRD_NUM_TRAIN_SAMPLES	0x03ff0000
 #define AR_PHY_PAPRD_TRAINER_CNTL4_CF_PAPRD_NUM_TRAIN_SAMPLES_S	16
 #define AR_PHY_PAPRD_TRAINER_CNTL4_CF_PAPRD_SAFETY_DELTA	0x0000f000
@@ -1040,6 +1090,14 @@
 #define AR_PHY_POWERTX_RATE5_POWERTXHT20_0	0x3F
 #define AR_PHY_POWERTX_RATE5_POWERTXHT20_0_S	0
 
+#define AR_PHY_POWERTX_RATE6			(AR_SM_BASE + 0x1d4)
+#define AR_PHY_POWERTX_RATE6_POWERTXHT20_5	0x3F00
+#define AR_PHY_POWERTX_RATE6_POWERTXHT20_5_S	8
+
+#define AR_PHY_POWERTX_RATE8			(AR_SM_BASE + 0x1dc)
+#define AR_PHY_POWERTX_RATE8_POWERTXHT40_5	0x3F00
+#define AR_PHY_POWERTX_RATE8_POWERTXHT40_5_S	8
+
 void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx);
 
 #endif  /* AR9003_PHY_H */
diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
new file mode 100644
index 00000000000..70de3d89a7b
--- /dev/null
+++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h
@@ -0,0 +1,943 @@
+/*
+ * Copyright (c) 2010 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef INITVALS_9485_H
+#define INITVALS_9485_H
+
+static const u32 ar9485Common_1_0[][2] = {
+	/*   Addr     allmodes */
+	{0x00007010, 0x00000022},
+	{0x00007020, 0x00000000},
+	{0x00007034, 0x00000002},
+	{0x00007038, 0x000004c2},
+};
+
+static const u32 ar9485_1_0_mac_postamble[][5] = {
+	/* Addr     5G_HT20     5G_HT40     2G_HT40     2G_HT20    */
+	{0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160},
+	{0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c},
+	{0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38},
+	{0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00},
+	{0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b},
+	{0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810},
+	{0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a},
+	{0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440},
+};
+
+static const u32 ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1[][2] = {
+	/*   Addr     allmodes */
+	{0x00018c00, 0x10212e5e},
+	{0x00018c04, 0x000801d8},
+	{0x00018c08, 0x0000580c},
+};
+
+static const u32 ar9485Common_wo_xlna_rx_gain_1_0[][2] = {
+	/*   Addr     allmodes */
+	{0x0000a000, 0x00010000},
+	{0x0000a004, 0x00030002},
+	{0x0000a008, 0x00050004},
+	{0x0000a00c, 0x00810080},
+	{0x0000a010, 0x01800082},
+	{0x0000a014, 0x01820181},
+	{0x0000a018, 0x01840183},
+	{0x0000a01c, 0x01880185},
+	{0x0000a020, 0x018a0189},
+	{0x0000a024, 0x02850284},
+	{0x0000a028, 0x02890288},
+	{0x0000a02c, 0x03850384},
+	{0x0000a030, 0x03890388},
+	{0x0000a034, 0x038b038a},
+	{0x0000a038, 0x038d038c},
+	{0x0000a03c, 0x03910390},
+	{0x0000a040, 0x03930392},
+	{0x0000a044, 0x03950394},
+	{0x0000a048, 0x00000396},
+	{0x0000a04c, 0x00000000},
+	{0x0000a050, 0x00000000},
+	{0x0000a054, 0x00000000},
+	{0x0000a058, 0x00000000},
+	{0x0000a05c, 0x00000000},
+	{0x0000a060, 0x00000000},
+	{0x0000a064, 0x00000000},
+	{0x0000a068, 0x00000000},
+	{0x0000a06c, 0x00000000},
+	{0x0000a070, 0x00000000},
+	{0x0000a074, 0x00000000},
+	{0x0000a078, 0x00000000},
+	{0x0000a07c, 0x00000000},
+	{0x0000a080, 0x28282828},
+	{0x0000a084, 0x28282828},
+	{0x0000a088, 0x28282828},
+	{0x0000a08c, 0x28282828},
+	{0x0000a090, 0x28282828},
+	{0x0000a094, 0x21212128},
+	{0x0000a098, 0x171c1c1c},
+	{0x0000a09c, 0x02020212},
+	{0x0000a0a0, 0x00000202},
+	{0x0000a0a4, 0x00000000},
+	{0x0000a0a8, 0x00000000},
+	{0x0000a0ac, 0x00000000},
+	{0x0000a0b0, 0x00000000},
+	{0x0000a0b4, 0x00000000},
+	{0x0000a0b8, 0x00000000},
+	{0x0000a0bc, 0x00000000},
+	{0x0000a0c0, 0x001f0000},
+	{0x0000a0c4, 0x111f1100},
+	{0x0000a0c8, 0x111d111e},
+	{0x0000a0cc, 0x111b111c},
+	{0x0000a0d0, 0x22032204},
+	{0x0000a0d4, 0x22012202},
+	{0x0000a0d8, 0x221f2200},
+	{0x0000a0dc, 0x221d221e},
+	{0x0000a0e0, 0x33013302},
+	{0x0000a0e4, 0x331f3300},
+	{0x0000a0e8, 0x4402331e},
+	{0x0000a0ec, 0x44004401},
+	{0x0000a0f0, 0x441e441f},
+	{0x0000a0f4, 0x55015502},
+	{0x0000a0f8, 0x551f5500},
+	{0x0000a0fc, 0x6602551e},
+	{0x0000a100, 0x66006601},
+	{0x0000a104, 0x661e661f},
+	{0x0000a108, 0x7703661d},
+	{0x0000a10c, 0x77017702},
+	{0x0000a110, 0x00007700},
+	{0x0000a114, 0x00000000},
+	{0x0000a118, 0x00000000},
+	{0x0000a11c, 0x00000000},
+	{0x0000a120, 0x00000000},
+	{0x0000a124, 0x00000000},
+	{0x0000a128, 0x00000000},
+	{0x0000a12c, 0x00000000},
+	{0x0000a130, 0x00000000},
+	{0x0000a134, 0x00000000},
+	{0x0000a138, 0x00000000},
+	{0x0000a13c, 0x00000000},
+	{0x0000a140, 0x001f0000},
+	{0x0000a144, 0x111f1100},
+	{0x0000a148, 0x111d111e},
+	{0x0000a14c, 0x111b111c},
+	{0x0000a150, 0x22032204},
+	{0x0000a154, 0x22012202},
+	{0x0000a158, 0x221f2200},
+	{0x0000a15c, 0x221d221e},
+	{0x0000a160, 0x33013302},
+	{0x0000a164, 0x331f3300},
+	{0x0000a168, 0x4402331e},
+	{0x0000a16c, 0x44004401},
+	{0x0000a170, 0x441e441f},
+	{0x0000a174, 0x55015502},
+	{0x0000a178, 0x551f5500},
+	{0x0000a17c, 0x6602551e},
+	{0x0000a180, 0x66006601},
+	{0x0000a184, 0x661e661f},
+	{0x0000a188, 0x7703661d},
+	{0x0000a18c, 0x77017702},
+	{0x0000a190, 0x00007700},
+	{0x0000a194, 0x00000000},
+	{0x0000a198, 0x00000000},
+	{0x0000a19c, 0x00000000},
+	{0x0000a1a0, 0x00000000},
+	{0x0000a1a4, 0x00000000},
+	{0x0000a1a8, 0x00000000},
+	{0x0000a1ac, 0x00000000},
+	{0x0000a1b0, 0x00000000},
+	{0x0000a1b4, 0x00000000},
+	{0x0000a1b8, 0x00000000},
+	{0x0000a1bc, 0x00000000},
+	{0x0000a1c0, 0x00000000},
+	{0x0000a1c4, 0x00000000},
+	{0x0000a1c8, 0x00000000},
+	{0x0000a1cc, 0x00000000},
+	{0x0000a1d0, 0x00000000},
+	{0x0000a1d4, 0x00000000},
+	{0x0000a1d8, 0x00000000},
+	{0x0000a1dc, 0x00000000},
+	{0x0000a1e0, 0x00000000},
+	{0x0000a1e4, 0x00000000},
+	{0x0000a1e8, 0x00000000},
+	{0x0000a1ec, 0x00000000},
+	{0x0000a1f0, 0x00000396},
+	{0x0000a1f4, 0x00000396},
+	{0x0000a1f8, 0x00000396},
+	{0x0000a1fc, 0x00000296},
+};
+
+static const u32 ar9485Modes_high_power_tx_gain_1_0[][5] = {
+	/*   Addr      5G_HT20     5G_HT40     2G_HT40     2G_HT20 */
+	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
+	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
+	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
+	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
+	{0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
+	{0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
+	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
+	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
+	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
+	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
+	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
+	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
+	{0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
+	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x2e000a20, 0x2e000a20},
+	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x34000e20, 0x34000e20},
+	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x38000e22, 0x38000e22},
+	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x3c000e24, 0x3c000e24},
+	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x40000e26, 0x40000e26},
+	{0x0000a544, 0x6502feca, 0x6502feca, 0x43001640, 0x43001640},
+	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x46001660, 0x46001660},
+	{0x0000a54c, 0x7203feca, 0x7203feca, 0x49001861, 0x49001861},
+	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x4c001a81, 0x4c001a81},
+	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x4f001a83, 0x4f001a83},
+	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x54001c85, 0x54001c85},
+	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x58001ce5, 0x58001ce5},
+	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5b001ce9, 0x5b001ce9},
+	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x60001eeb, 0x60001eeb},
+	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x00016044, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db},
+};
+
+static const u32 ar9485_1_0[][2] = {
+	/*  Addr      allmodes */
+	{0x0000a580, 0x00000000},
+	{0x0000a584, 0x00000000},
+	{0x0000a588, 0x00000000},
+	{0x0000a58c, 0x00000000},
+	{0x0000a590, 0x00000000},
+	{0x0000a594, 0x00000000},
+	{0x0000a598, 0x00000000},
+	{0x0000a59c, 0x00000000},
+	{0x0000a5a0, 0x00000000},
+	{0x0000a5a4, 0x00000000},
+	{0x0000a5a8, 0x00000000},
+	{0x0000a5ac, 0x00000000},
+	{0x0000a5b0, 0x00000000},
+	{0x0000a5b4, 0x00000000},
+	{0x0000a5b8, 0x00000000},
+	{0x0000a5bc, 0x00000000},
+};
+
+static const u32 ar9485_1_0_radio_core[][2] = {
+	/*   Addr     allmodes */
+	{0x00016000, 0x36db6db6},
+	{0x00016004, 0x6db6db40},
+	{0x00016008, 0x73800000},
+	{0x0001600c, 0x00000000},
+	{0x00016040, 0x7f80fff8},
+	{0x00016048, 0x6c92426e},
+	{0x0001604c, 0x000f0278},
+	{0x00016050, 0x6db6db6c},
+	{0x00016054, 0x6db60000},
+	{0x00016080, 0x00080000},
+	{0x00016084, 0x0e48048c},
+	{0x00016088, 0x14214514},
+	{0x0001608c, 0x119f081e},
+	{0x00016090, 0x24926490},
+	{0x00016098, 0xd28b3330},
+	{0x000160a0, 0xc2108ffe},
+	{0x000160a4, 0x812fc370},
+	{0x000160a8, 0x423c8000},
+	{0x000160b4, 0x92480040},
+	{0x000160c0, 0x006db6db},
+	{0x000160c4, 0x0186db60},
+	{0x000160c8, 0x6db6db6c},
+	{0x000160cc, 0x6de6fbe0},
+	{0x000160d0, 0xf7dfcf3c},
+	{0x00016100, 0x04cb0001},
+	{0x00016104, 0xfff80015},
+	{0x00016108, 0x00080010},
+	{0x00016144, 0x01884080},
+	{0x00016148, 0x00008040},
+	{0x00016180, 0x08453333},
+	{0x00016184, 0x18e82f01},
+	{0x00016188, 0x00000000},
+	{0x0001618c, 0x00000000},
+	{0x00016240, 0x08400000},
+	{0x00016244, 0x1bf90f00},
+	{0x00016248, 0x00000000},
+	{0x0001624c, 0x00000000},
+	{0x00016280, 0x01000015},
+	{0x00016284, 0x00d30000},
+	{0x00016288, 0x00318000},
+	{0x0001628c, 0x50000000},
+	{0x00016290, 0x4b96210f},
+	{0x00016380, 0x00000000},
+	{0x00016384, 0x00000000},
+	{0x00016388, 0x00800700},
+	{0x0001638c, 0x00800700},
+	{0x00016390, 0x00800700},
+	{0x00016394, 0x00000000},
+	{0x00016398, 0x00000000},
+	{0x0001639c, 0x00000000},
+	{0x000163a0, 0x00000001},
+	{0x000163a4, 0x00000001},
+	{0x000163a8, 0x00000000},
+	{0x000163ac, 0x00000000},
+	{0x000163b0, 0x00000000},
+	{0x000163b4, 0x00000000},
+	{0x000163b8, 0x00000000},
+	{0x000163bc, 0x00000000},
+	{0x000163c0, 0x000000a0},
+	{0x000163c4, 0x000c0000},
+	{0x000163c8, 0x14021402},
+	{0x000163cc, 0x00001402},
+	{0x000163d0, 0x00000000},
+	{0x000163d4, 0x00000000},
+	{0x00016c40, 0x1319c178},
+	{0x00016c44, 0x10000000},
+};
+
+static const u32 ar9485Modes_lowest_ob_db_tx_gain_1_0[][5] = {
+	/*  Addr       5G_HT20     5G_HT40     2G_HT40     2G_HT20 */
+	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
+	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
+	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
+	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
+	{0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
+	{0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
+	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
+	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
+	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
+	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
+	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
+	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
+	{0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
+	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x2e000a20, 0x2e000a20},
+	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x34000e20, 0x34000e20},
+	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x38000e22, 0x38000e22},
+	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x3c000e24, 0x3c000e24},
+	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x40000e26, 0x40000e26},
+	{0x0000a544, 0x6502feca, 0x6502feca, 0x43001640, 0x43001640},
+	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x46001660, 0x46001660},
+	{0x0000a54c, 0x7203feca, 0x7203feca, 0x49001861, 0x49001861},
+	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x4c001a81, 0x4c001a81},
+	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x4f001a83, 0x4f001a83},
+	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x54001c85, 0x54001c85},
+	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x58001ce5, 0x58001ce5},
+	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5b001ce9, 0x5b001ce9},
+	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x60001eeb, 0x60001eeb},
+	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x00016044, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db},
+};
+
+static const u32 ar9485_1_0_baseband_core[][2] = {
+	/* Addr      allmodes  */
+	{0x00009800, 0xafe68e30},
+	{0x00009804, 0xfd14e000},
+	{0x00009808, 0x9c0a8f6b},
+	{0x0000980c, 0x04800000},
+	{0x00009814, 0x9280c00a},
+	{0x00009818, 0x00000000},
+	{0x0000981c, 0x00020028},
+	{0x00009834, 0x5f3ca3de},
+	{0x00009838, 0x0108ecff},
+	{0x0000983c, 0x14750600},
+	{0x00009880, 0x201fff00},
+	{0x00009884, 0x00001042},
+	{0x000098a4, 0x00200400},
+	{0x000098b0, 0x52440bbe},
+	{0x000098bc, 0x00000002},
+	{0x000098d0, 0x004b6a8e},
+	{0x000098d4, 0x00000820},
+	{0x000098dc, 0x00000000},
+	{0x000098f0, 0x00000000},
+	{0x000098f4, 0x00000000},
+	{0x00009c04, 0x00000000},
+	{0x00009c08, 0x03200000},
+	{0x00009c0c, 0x00000000},
+	{0x00009c10, 0x00000000},
+	{0x00009c14, 0x00046384},
+	{0x00009c18, 0x05b6b440},
+	{0x00009c1c, 0x00b6b440},
+	{0x00009d00, 0xc080a333},
+	{0x00009d04, 0x40206c10},
+	{0x00009d08, 0x009c4060},
+	{0x00009d0c, 0x1883800a},
+	{0x00009d10, 0x01834061},
+	{0x00009d14, 0x00c00400},
+	{0x00009d18, 0x00000000},
+	{0x00009d1c, 0x00000000},
+	{0x00009e08, 0x0038233c},
+	{0x00009e24, 0x990bb515},
+	{0x00009e28, 0x0a6f0000},
+	{0x00009e30, 0x06336f77},
+	{0x00009e34, 0x6af6532f},
+	{0x00009e38, 0x0cc80c00},
+	{0x00009e40, 0x0d261820},
+	{0x00009e4c, 0x00001004},
+	{0x00009e50, 0x00ff03f1},
+	{0x00009fc0, 0x80be4788},
+	{0x00009fc4, 0x0001efb5},
+	{0x00009fcc, 0x40000014},
+	{0x0000a20c, 0x00000000},
+	{0x0000a210, 0x00000000},
+	{0x0000a220, 0x00000000},
+	{0x0000a224, 0x00000000},
+	{0x0000a228, 0x10002310},
+	{0x0000a23c, 0x00000000},
+	{0x0000a244, 0x0c000000},
+	{0x0000a2a0, 0x00000001},
+	{0x0000a2c0, 0x00000001},
+	{0x0000a2c8, 0x00000000},
+	{0x0000a2cc, 0x18c43433},
+	{0x0000a2d4, 0x00000000},
+	{0x0000a2dc, 0x00000000},
+	{0x0000a2e0, 0x00000000},
+	{0x0000a2e4, 0x00000000},
+	{0x0000a2e8, 0x00000000},
+	{0x0000a2ec, 0x00000000},
+	{0x0000a2f0, 0x00000000},
+	{0x0000a2f4, 0x00000000},
+	{0x0000a2f8, 0x00000000},
+	{0x0000a344, 0x00000000},
+	{0x0000a34c, 0x00000000},
+	{0x0000a350, 0x0000a000},
+	{0x0000a364, 0x00000000},
+	{0x0000a370, 0x00000000},
+	{0x0000a390, 0x00000001},
+	{0x0000a394, 0x00000444},
+	{0x0000a398, 0x001f0e0f},
+	{0x0000a39c, 0x0075393f},
+	{0x0000a3a0, 0xb79f6427},
+	{0x0000a3a4, 0x00000000},
+	{0x0000a3a8, 0xaaaaaaaa},
+	{0x0000a3ac, 0x3c466478},
+	{0x0000a3c0, 0x20202020},
+	{0x0000a3c4, 0x22222220},
+	{0x0000a3c8, 0x20200020},
+	{0x0000a3cc, 0x20202020},
+	{0x0000a3d0, 0x20202020},
+	{0x0000a3d4, 0x20202020},
+	{0x0000a3d8, 0x20202020},
+	{0x0000a3dc, 0x20202020},
+	{0x0000a3e0, 0x20202020},
+	{0x0000a3e4, 0x20202020},
+	{0x0000a3e8, 0x20202020},
+	{0x0000a3ec, 0x20202020},
+	{0x0000a3f0, 0x00000000},
+	{0x0000a3f4, 0x00000006},
+	{0x0000a3f8, 0x0cdbd380},
+	{0x0000a3fc, 0x000f0f01},
+	{0x0000a400, 0x8fa91f01},
+	{0x0000a404, 0x00000000},
+	{0x0000a408, 0x0e79e5c6},
+	{0x0000a40c, 0x00820820},
+	{0x0000a414, 0x1ce739ce},
+	{0x0000a418, 0x2d0011ce},
+	{0x0000a41c, 0x1ce739ce},
+	{0x0000a420, 0x000001ce},
+	{0x0000a424, 0x1ce739ce},
+	{0x0000a428, 0x000001ce},
+	{0x0000a42c, 0x1ce739ce},
+	{0x0000a430, 0x1ce739ce},
+	{0x0000a434, 0x00000000},
+	{0x0000a438, 0x00001801},
+	{0x0000a43c, 0x00000000},
+	{0x0000a440, 0x00000000},
+	{0x0000a444, 0x00000000},
+	{0x0000a448, 0x04000000},
+	{0x0000a44c, 0x00000001},
+	{0x0000a450, 0x00010000},
+	{0x0000a458, 0x00000000},
+	{0x0000a5c4, 0x3fad9d74},
+	{0x0000a5c8, 0x0048060a},
+	{0x0000a5cc, 0x00000637},
+	{0x0000a760, 0x03020100},
+	{0x0000a764, 0x09080504},
+	{0x0000a768, 0x0d0c0b0a},
+	{0x0000a76c, 0x13121110},
+	{0x0000a770, 0x31301514},
+	{0x0000a774, 0x35343332},
+	{0x0000a778, 0x00000036},
+	{0x0000a780, 0x00000838},
+	{0x0000a7c0, 0x00000000},
+	{0x0000a7c4, 0xfffffffc},
+	{0x0000a7c8, 0x00000000},
+	{0x0000a7cc, 0x00000000},
+	{0x0000a7d0, 0x00000000},
+	{0x0000a7d4, 0x00000004},
+	{0x0000a7dc, 0x00000001},
+};
+
+static const u32 ar9485Modes_high_ob_db_tx_gain_1_0[][5] = {
+	/* Addr        5G_HT20     5G_HT40     2G_HT40    2G_HT20  */
+	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
+	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
+	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
+	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
+	{0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
+	{0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
+	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
+	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
+	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
+	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
+	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
+	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
+	{0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
+	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x2e000a20, 0x2e000a20},
+	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x34000e20, 0x34000e20},
+	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x38000e22, 0x38000e22},
+	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x3c000e24, 0x3c000e24},
+	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x40000e26, 0x40000e26},
+	{0x0000a544, 0x6502feca, 0x6502feca, 0x43001640, 0x43001640},
+	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x46001660, 0x46001660},
+	{0x0000a54c, 0x7203feca, 0x7203feca, 0x49001861, 0x49001861},
+	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x4c001a81, 0x4c001a81},
+	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x4f001a83, 0x4f001a83},
+	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x54001c85, 0x54001c85},
+	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x58001ce5, 0x58001ce5},
+	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5b001ce9, 0x5b001ce9},
+	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x60001eeb, 0x60001eeb},
+	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x00016044, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db},
+};
+
+static const u32 ar9485Common_rx_gain_1_0[][2] = {
+	/* Addr      allmodes  */
+	{0x0000a000, 0x00010000},
+	{0x0000a004, 0x00030002},
+	{0x0000a008, 0x00050004},
+	{0x0000a00c, 0x00810080},
+	{0x0000a010, 0x01800082},
+	{0x0000a014, 0x01820181},
+	{0x0000a018, 0x01840183},
+	{0x0000a01c, 0x01880185},
+	{0x0000a020, 0x018a0189},
+	{0x0000a024, 0x02850284},
+	{0x0000a028, 0x02890288},
+	{0x0000a02c, 0x03850384},
+	{0x0000a030, 0x03890388},
+	{0x0000a034, 0x038b038a},
+	{0x0000a038, 0x038d038c},
+	{0x0000a03c, 0x03910390},
+	{0x0000a040, 0x03930392},
+	{0x0000a044, 0x03950394},
+	{0x0000a048, 0x00000396},
+	{0x0000a04c, 0x00000000},
+	{0x0000a050, 0x00000000},
+	{0x0000a054, 0x00000000},
+	{0x0000a058, 0x00000000},
+	{0x0000a05c, 0x00000000},
+	{0x0000a060, 0x00000000},
+	{0x0000a064, 0x00000000},
+	{0x0000a068, 0x00000000},
+	{0x0000a06c, 0x00000000},
+	{0x0000a070, 0x00000000},
+	{0x0000a074, 0x00000000},
+	{0x0000a078, 0x00000000},
+	{0x0000a07c, 0x00000000},
+	{0x0000a080, 0x28282828},
+	{0x0000a084, 0x28282828},
+	{0x0000a088, 0x28282828},
+	{0x0000a08c, 0x28282828},
+	{0x0000a090, 0x28282828},
+	{0x0000a094, 0x21212128},
+	{0x0000a098, 0x171c1c1c},
+	{0x0000a09c, 0x02020212},
+	{0x0000a0a0, 0x00000202},
+	{0x0000a0a4, 0x00000000},
+	{0x0000a0a8, 0x00000000},
+	{0x0000a0ac, 0x00000000},
+	{0x0000a0b0, 0x00000000},
+	{0x0000a0b4, 0x00000000},
+	{0x0000a0b8, 0x00000000},
+	{0x0000a0bc, 0x00000000},
+	{0x0000a0c0, 0x001f0000},
+	{0x0000a0c4, 0x111f1100},
+	{0x0000a0c8, 0x111d111e},
+	{0x0000a0cc, 0x111b111c},
+	{0x0000a0d0, 0x22032204},
+	{0x0000a0d4, 0x22012202},
+	{0x0000a0d8, 0x221f2200},
+	{0x0000a0dc, 0x221d221e},
+	{0x0000a0e0, 0x33013302},
+	{0x0000a0e4, 0x331f3300},
+	{0x0000a0e8, 0x4402331e},
+	{0x0000a0ec, 0x44004401},
+	{0x0000a0f0, 0x441e441f},
+	{0x0000a0f4, 0x55015502},
+	{0x0000a0f8, 0x551f5500},
+	{0x0000a0fc, 0x6602551e},
+	{0x0000a100, 0x66006601},
+	{0x0000a104, 0x661e661f},
+	{0x0000a108, 0x7703661d},
+	{0x0000a10c, 0x77017702},
+	{0x0000a110, 0x00007700},
+	{0x0000a114, 0x00000000},
+	{0x0000a118, 0x00000000},
+	{0x0000a11c, 0x00000000},
+	{0x0000a120, 0x00000000},
+	{0x0000a124, 0x00000000},
+	{0x0000a128, 0x00000000},
+	{0x0000a12c, 0x00000000},
+	{0x0000a130, 0x00000000},
+	{0x0000a134, 0x00000000},
+	{0x0000a138, 0x00000000},
+	{0x0000a13c, 0x00000000},
+	{0x0000a140, 0x001f0000},
+	{0x0000a144, 0x111f1100},
+	{0x0000a148, 0x111d111e},
+	{0x0000a14c, 0x111b111c},
+	{0x0000a150, 0x22032204},
+	{0x0000a154, 0x22012202},
+	{0x0000a158, 0x221f2200},
+	{0x0000a15c, 0x221d221e},
+	{0x0000a160, 0x33013302},
+	{0x0000a164, 0x331f3300},
+	{0x0000a168, 0x4402331e},
+	{0x0000a16c, 0x44004401},
+	{0x0000a170, 0x441e441f},
+	{0x0000a174, 0x55015502},
+	{0x0000a178, 0x551f5500},
+	{0x0000a17c, 0x6602551e},
+	{0x0000a180, 0x66006601},
+	{0x0000a184, 0x661e661f},
+	{0x0000a188, 0x7703661d},
+	{0x0000a18c, 0x77017702},
+	{0x0000a190, 0x00007700},
+	{0x0000a194, 0x00000000},
+	{0x0000a198, 0x00000000},
+	{0x0000a19c, 0x00000000},
+	{0x0000a1a0, 0x00000000},
+	{0x0000a1a4, 0x00000000},
+	{0x0000a1a8, 0x00000000},
+	{0x0000a1ac, 0x00000000},
+	{0x0000a1b0, 0x00000000},
+	{0x0000a1b4, 0x00000000},
+	{0x0000a1b8, 0x00000000},
+	{0x0000a1bc, 0x00000000},
+	{0x0000a1c0, 0x00000000},
+	{0x0000a1c4, 0x00000000},
+	{0x0000a1c8, 0x00000000},
+	{0x0000a1cc, 0x00000000},
+	{0x0000a1d0, 0x00000000},
+	{0x0000a1d4, 0x00000000},
+	{0x0000a1d8, 0x00000000},
+	{0x0000a1dc, 0x00000000},
+	{0x0000a1e0, 0x00000000},
+	{0x0000a1e4, 0x00000000},
+	{0x0000a1e8, 0x00000000},
+	{0x0000a1ec, 0x00000000},
+	{0x0000a1f0, 0x00000396},
+	{0x0000a1f4, 0x00000396},
+	{0x0000a1f8, 0x00000396},
+	{0x0000a1fc, 0x00000296},
+};
+
+static const u32 ar9485_1_0_pcie_phy_pll_on_clkreq_enable_L1[][2] = {
+	/*   Addr    allmodes  */
+	{0x00018c00, 0x10252e5e},
+	{0x00018c04, 0x000801d8},
+	{0x00018c08, 0x0000580c},
+};
+
+static const u32 ar9485_1_0_pcie_phy_clkreq_enable_L1[][2] = {
+	/*  Addr    allmodes   */
+	{0x00018c00, 0x10253e5e},
+	{0x00018c04, 0x000801d8},
+	{0x00018c08, 0x0000580c},
+};
+
+static const u32 ar9485_1_0_soc_preamble[][2] = {
+	/*   Addr     allmodes */
+	{0x000040a4, 0x00a0c9c9},
+	{0x00007048, 0x00000004},
+};
+
+static const u32 ar9485_fast_clock_1_0_baseband_postamble[][3] = {
+	/*   Addr      5G_HT20     5G_HT40 */
+	{0x00009e00, 0x03721821, 0x03721821},
+	{0x0000a230, 0x0000400b, 0x00004016},
+	{0x0000a254, 0x00000898, 0x00001130},
+};
+
+static const u32 ar9485_1_0_baseband_postamble[][5] = {
+	/* Addr        5G_HT20     5G_HT40     2G_HT40     2G_HT20 */
+	{0x00009810, 0xd00a8005, 0xd00a8005, 0xd00a8005, 0xd00a8005},
+	{0x00009820, 0x206a002e, 0x206a002e, 0x206a002e, 0x206a002e},
+	{0x00009824, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0},
+	{0x00009828, 0x06903081, 0x06903081, 0x06903881, 0x06903881},
+	{0x0000982c, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4},
+	{0x00009830, 0x0000059c, 0x0000059c, 0x0000059c, 0x0000059c},
+	{0x00009c00, 0x00000044, 0x00000044, 0x00000044, 0x00000044},
+	{0x00009e00, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0},
+	{0x00009e04, 0x00182020, 0x00182020, 0x00182020, 0x00182020},
+	{0x00009e0c, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2},
+	{0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec80d2e, 0x7ec80d2e},
+	{0x00009e14, 0x31395d5e, 0x3139605e, 0x3139605e, 0x31395d5e},
+	{0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
+	{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
+	{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
+	{0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222},
+	{0x00009e44, 0x02321e27, 0x02321e27, 0x02282324, 0x02282324},
+	{0x00009e48, 0x5030201a, 0x5030201a, 0x50302010, 0x50302010},
+	{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
+	{0x0000a204, 0x01303fc0, 0x01303fc4, 0x01303fc4, 0x01303fc0},
+	{0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004},
+	{0x0000a230, 0x0000400a, 0x00004014, 0x00004016, 0x0000400b},
+	{0x0000a234, 0x10000fff, 0x10000fff, 0x10000fff, 0x10000fff},
+	{0x0000a238, 0xffb81018, 0xffb81018, 0xffb81018, 0xffb81018},
+	{0x0000a250, 0x00000000, 0x00000000, 0x00000210, 0x00000108},
+	{0x0000a254, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898},
+	{0x0000a258, 0x02020002, 0x02020002, 0x02020002, 0x02020002},
+	{0x0000a25c, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e},
+	{0x0000a260, 0x3a021501, 0x3a021501, 0x3a021501, 0x3a021501},
+	{0x0000a264, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e},
+	{0x0000a280, 0x00000007, 0x00000007, 0x0000000b, 0x0000000b},
+	{0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0},
+	{0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+	{0x0000a2d0, 0x00071981, 0x00071981, 0x00071981, 0x00071982},
+	{0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a},
+	{0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+	{0x0000be04, 0x00802020, 0x00802020, 0x00802020, 0x00802020},
+	{0x0000be18, 0x00000000, 0x00000000, 0x00000000, 0x00000000},
+};
+
+static const u32 ar9485Modes_low_ob_db_tx_gain_1_0[][5] = {
+	/*  Addr      5G_HT20    5G_HT40     2G_HT40     2G_HT20   */
+	{0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8},
+	{0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000},
+	{0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002},
+	{0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004},
+	{0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200},
+	{0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202},
+	{0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400},
+	{0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402},
+	{0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404},
+	{0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603},
+	{0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605},
+	{0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03},
+	{0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04},
+	{0x0000a530, 0x48023ec6, 0x48023ec6, 0x2e000a20, 0x2e000a20},
+	{0x0000a534, 0x4d023f01, 0x4d023f01, 0x34000e20, 0x34000e20},
+	{0x0000a538, 0x53023f4b, 0x53023f4b, 0x38000e22, 0x38000e22},
+	{0x0000a53c, 0x5a027f09, 0x5a027f09, 0x3c000e24, 0x3c000e24},
+	{0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x40000e26, 0x40000e26},
+	{0x0000a544, 0x6502feca, 0x6502feca, 0x43001640, 0x43001640},
+	{0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x46001660, 0x46001660},
+	{0x0000a54c, 0x7203feca, 0x7203feca, 0x49001861, 0x49001861},
+	{0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x4c001a81, 0x4c001a81},
+	{0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x4f001a83, 0x4f001a83},
+	{0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x54001c85, 0x54001c85},
+	{0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x58001ce5, 0x58001ce5},
+	{0x0000a560, 0x900fff0b, 0x900fff0b, 0x5b001ce9, 0x5b001ce9},
+	{0x0000a564, 0x960fffcb, 0x960fffcb, 0x60001eeb, 0x60001eeb},
+	{0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x60001eeb, 0x60001eeb},
+	{0x00016044, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db, 0x05b6b2db},
+};
+
+static const u32 ar9485_1_0_pcie_phy_clkreq_disable_L1[][2] = {
+	/*   Addr     allmodes */
+	{0x00018c00, 0x10213e5e},
+	{0x00018c04, 0x000801d8},
+	{0x00018c08, 0x0000580c},
+};
+
+static const u32 ar9485_1_0_radio_postamble[][2] = {
+	/*   Addr     allmodes */
+	{0x0001609c, 0x0b283f31},
+	{0x000160ac, 0x24611800},
+	{0x000160b0, 0x03284f3e},
+	{0x0001610c, 0x00170000},
+	{0x00016140, 0x10804008},
+};
+
+static const u32 ar9485_1_0_mac_core[][2] = {
+	/*  Addr      allmodes */
+	{0x00000008, 0x00000000},
+	{0x00000030, 0x00020085},
+	{0x00000034, 0x00000005},
+	{0x00000040, 0x00000000},
+	{0x00000044, 0x00000000},
+	{0x00000048, 0x00000008},
+	{0x0000004c, 0x00000010},
+	{0x00000050, 0x00000000},
+	{0x00001040, 0x002ffc0f},
+	{0x00001044, 0x002ffc0f},
+	{0x00001048, 0x002ffc0f},
+	{0x0000104c, 0x002ffc0f},
+	{0x00001050, 0x002ffc0f},
+	{0x00001054, 0x002ffc0f},
+	{0x00001058, 0x002ffc0f},
+	{0x0000105c, 0x002ffc0f},
+	{0x00001060, 0x002ffc0f},
+	{0x00001064, 0x002ffc0f},
+	{0x000010f0, 0x00000100},
+	{0x00001270, 0x00000000},
+	{0x000012b0, 0x00000000},
+	{0x000012f0, 0x00000000},
+	{0x0000143c, 0x00000000},
+	{0x0000147c, 0x00000000},
+	{0x00008000, 0x00000000},
+	{0x00008004, 0x00000000},
+	{0x00008008, 0x00000000},
+	{0x0000800c, 0x00000000},
+	{0x00008018, 0x00000000},
+	{0x00008020, 0x00000000},
+	{0x00008038, 0x00000000},
+	{0x0000803c, 0x00000000},
+	{0x00008040, 0x00000000},
+	{0x00008044, 0x00000000},
+	{0x00008048, 0x00000000},
+	{0x0000804c, 0xffffffff},
+	{0x00008054, 0x00000000},
+	{0x00008058, 0x00000000},
+	{0x0000805c, 0x000fc78f},
+	{0x00008060, 0x0000000f},
+	{0x00008064, 0x00000000},
+	{0x00008070, 0x00000310},
+	{0x00008074, 0x00000020},
+	{0x00008078, 0x00000000},
+	{0x0000809c, 0x0000000f},
+	{0x000080a0, 0x00000000},
+	{0x000080a4, 0x02ff0000},
+	{0x000080a8, 0x0e070605},
+	{0x000080ac, 0x0000000d},
+	{0x000080b0, 0x00000000},
+	{0x000080b4, 0x00000000},
+	{0x000080b8, 0x00000000},
+	{0x000080bc, 0x00000000},
+	{0x000080c0, 0x2a800000},
+	{0x000080c4, 0x06900168},
+	{0x000080c8, 0x13881c20},
+	{0x000080cc, 0x01f40000},
+	{0x000080d0, 0x00252500},
+	{0x000080d4, 0x00a00000},
+	{0x000080d8, 0x00400000},
+	{0x000080dc, 0x00000000},
+	{0x000080e0, 0xffffffff},
+	{0x000080e4, 0x0000ffff},
+	{0x000080e8, 0x3f3f3f3f},
+	{0x000080ec, 0x00000000},
+	{0x000080f0, 0x00000000},
+	{0x000080f4, 0x00000000},
+	{0x000080fc, 0x00020000},
+	{0x00008100, 0x00000000},
+	{0x00008108, 0x00000052},
+	{0x0000810c, 0x00000000},
+	{0x00008110, 0x00000000},
+	{0x00008114, 0x000007ff},
+	{0x00008118, 0x000000aa},
+	{0x0000811c, 0x00003210},
+	{0x00008124, 0x00000000},
+	{0x00008128, 0x00000000},
+	{0x0000812c, 0x00000000},
+	{0x00008130, 0x00000000},
+	{0x00008134, 0x00000000},
+	{0x00008138, 0x00000000},
+	{0x0000813c, 0x0000ffff},
+	{0x00008144, 0xffffffff},
+	{0x00008168, 0x00000000},
+	{0x0000816c, 0x00000000},
+	{0x00008170, 0x18486200},
+	{0x00008174, 0x33332210},
+	{0x00008178, 0x00000000},
+	{0x0000817c, 0x00020000},
+	{0x000081c0, 0x00000000},
+	{0x000081c4, 0x33332210},
+	{0x000081c8, 0x00000000},
+	{0x000081cc, 0x00000000},
+	{0x000081d4, 0x00000000},
+	{0x000081ec, 0x00000000},
+	{0x000081f0, 0x00000000},
+	{0x000081f4, 0x00000000},
+	{0x000081f8, 0x00000000},
+	{0x000081fc, 0x00000000},
+	{0x00008240, 0x00100000},
+	{0x00008244, 0x0010f400},
+	{0x00008248, 0x00000800},
+	{0x0000824c, 0x0001e800},
+	{0x00008250, 0x00000000},
+	{0x00008254, 0x00000000},
+	{0x00008258, 0x00000000},
+	{0x0000825c, 0x40000000},
+	{0x00008260, 0x00080922},
+	{0x00008264, 0x9ca00010},
+	{0x00008268, 0xffffffff},
+	{0x0000826c, 0x0000ffff},
+	{0x00008270, 0x00000000},
+	{0x00008274, 0x40000000},
+	{0x00008278, 0x003e4180},
+	{0x0000827c, 0x00000004},
+	{0x00008284, 0x0000002c},
+	{0x00008288, 0x0000002c},
+	{0x0000828c, 0x000000ff},
+	{0x00008294, 0x00000000},
+	{0x00008298, 0x00000000},
+	{0x0000829c, 0x00000000},
+	{0x00008300, 0x00000140},
+	{0x00008314, 0x00000000},
+	{0x0000831c, 0x0000010d},
+	{0x00008328, 0x00000000},
+	{0x0000832c, 0x00000007},
+	{0x00008330, 0x00000302},
+	{0x00008334, 0x00000700},
+	{0x00008338, 0x00ff0000},
+	{0x0000833c, 0x02400000},
+	{0x00008340, 0x000107ff},
+	{0x00008344, 0xa248105b},
+	{0x00008348, 0x008f0000},
+	{0x0000835c, 0x00000000},
+	{0x00008360, 0xffffffff},
+	{0x00008364, 0xffffffff},
+	{0x00008368, 0x00000000},
+	{0x00008370, 0x00000000},
+	{0x00008374, 0x000000ff},
+	{0x00008378, 0x00000000},
+	{0x0000837c, 0x00000000},
+	{0x00008380, 0xffffffff},
+	{0x00008384, 0xffffffff},
+	{0x00008390, 0xffffffff},
+	{0x00008394, 0xffffffff},
+	{0x00008398, 0x00000000},
+	{0x0000839c, 0x00000000},
+	{0x000083a0, 0x00000000},
+	{0x000083a4, 0x0000fa14},
+	{0x000083a8, 0x000f0c00},
+	{0x000083ac, 0x33332210},
+	{0x000083b0, 0x33332210},
+	{0x000083b4, 0x33332210},
+	{0x000083b8, 0x33332210},
+	{0x000083bc, 0x00000000},
+	{0x000083c0, 0x00000000},
+	{0x000083c4, 0x00000000},
+	{0x000083c8, 0x00000000},
+	{0x000083cc, 0x00000200},
+	{0x000083d0, 0x000301ff},
+};
+#endif
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 9b8e7e3fceb..3681caf5428 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -21,6 +21,7 @@
 #include <linux/device.h>
 #include <linux/leds.h>
 #include <linux/completion.h>
+#include <linux/pm_qos_params.h>
 
 #include "debug.h"
 #include "common.h"
@@ -56,6 +57,8 @@ struct ath_node;
 
 #define A_MAX(a, b) ((a) > (b) ? (a) : (b))
 
+#define ATH9K_PM_QOS_DEFAULT_VALUE	55
+
 #define TSF_TO_TU(_h,_l) \
 	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
 
@@ -86,33 +89,19 @@ struct ath_config {
 /**
  * enum buffer_type - Buffer type flags
  *
- * @BUF_HT: Send this buffer using HT capabilities
  * @BUF_AMPDU: This buffer is an ampdu, as part of an aggregate (during TX)
  * @BUF_AGGR: Indicates whether the buffer can be aggregated
  *	(used in aggregation scheduling)
- * @BUF_RETRY: Indicates whether the buffer is retried
  * @BUF_XRETRY: To denote excessive retries of the buffer
  */
 enum buffer_type {
-	BUF_HT			= BIT(1),
 	BUF_AMPDU		= BIT(2),
 	BUF_AGGR		= BIT(3),
-	BUF_RETRY		= BIT(4),
 	BUF_XRETRY		= BIT(5),
 };
 
-#define bf_nframes      	bf_state.bfs_nframes
-#define bf_al           	bf_state.bfs_al
-#define bf_frmlen       	bf_state.bfs_frmlen
-#define bf_retries      	bf_state.bfs_retries
-#define bf_seqno        	bf_state.bfs_seqno
-#define bf_tidno        	bf_state.bfs_tidno
-#define bf_keyix                bf_state.bfs_keyix
-#define bf_keytype      	bf_state.bfs_keytype
-#define bf_isht(bf)		(bf->bf_state.bf_type & BUF_HT)
 #define bf_isampdu(bf)		(bf->bf_state.bf_type & BUF_AMPDU)
 #define bf_isaggr(bf)		(bf->bf_state.bf_type & BUF_AGGR)
-#define bf_isretried(bf)	(bf->bf_state.bf_type & BUF_RETRY)
 #define bf_isxretried(bf)	(bf->bf_state.bf_type & BUF_XRETRY)
 
 #define ATH_TXSTATUS_RING_SIZE 64
@@ -177,8 +166,8 @@ void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd,
 
 /* returns delimiter padding required given the packet length */
 #define ATH_AGGR_GET_NDELIM(_len)					\
-	(((((_len) + ATH_AGGR_DELIM_SZ) < ATH_AGGR_MINPLEN) ?           \
-	  (ATH_AGGR_MINPLEN - (_len) - ATH_AGGR_DELIM_SZ) : 0) >> 2)
+       (((_len) >= ATH_AGGR_MINPLEN) ? 0 :                             \
+        DIV_ROUND_UP(ATH_AGGR_MINPLEN - (_len), ATH_AGGR_DELIM_SZ))
 
 #define BAW_WITHIN(_start, _bawsz, _seqno) \
 	((((_seqno) - (_start)) & 4095) < (_bawsz))
@@ -195,12 +184,12 @@ enum ATH_AGGR_STATUS {
 
 #define ATH_TXFIFO_DEPTH 8
 struct ath_txq {
-	int axq_class;
 	u32 axq_qnum;
 	u32 *axq_link;
 	struct list_head axq_q;
 	spinlock_t axq_lock;
 	u32 axq_depth;
+	u32 axq_ampdu_depth;
 	bool stopped;
 	bool axq_tx_inprogress;
 	struct list_head axq_acq;
@@ -208,27 +197,28 @@ struct ath_txq {
 	struct list_head txq_fifo_pending;
 	u8 txq_headidx;
 	u8 txq_tailidx;
+	int pending_frames;
 };
 
 struct ath_atx_ac {
+	struct ath_txq *txq;
 	int sched;
-	int qnum;
 	struct list_head list;
 	struct list_head tid_q;
 };
 
+struct ath_frame_info {
+	int framelen;
+	u32 keyix;
+	enum ath9k_key_type keytype;
+	u8 retries;
+	u16 seqno;
+};
+
 struct ath_buf_state {
-	int bfs_nframes;
-	u16 bfs_al;
-	u16 bfs_frmlen;
-	int bfs_seqno;
-	int bfs_tidno;
-	int bfs_retries;
 	u8 bf_type;
 	u8 bfs_paprd;
-	unsigned long bfs_paprd_timestamp;
-	u32 bfs_keyix;
-	enum ath9k_key_type bfs_keytype;
+	enum ath9k_internal_frame_type bfs_ftype;
 };
 
 struct ath_buf {
@@ -241,7 +231,6 @@ struct ath_buf {
 	dma_addr_t bf_daddr;		/* physical addr of desc */
 	dma_addr_t bf_buf_addr;	/* physical addr of data buffer, for DMA */
 	bool bf_stale;
-	bool bf_tx_aborted;
 	u16 bf_flags;
 	struct ath_buf_state bf_state;
 	struct ath_wiphy *aphy;
@@ -270,7 +259,6 @@ struct ath_node {
 	struct ath_atx_ac ac[WME_NUM_AC];
 	u16 maxampdu;
 	u8 mpdudensity;
-	int last_rssi;
 };
 
 #define AGGR_CLEANUP         BIT(1)
@@ -279,6 +267,7 @@ struct ath_node {
 
 struct ath_tx_control {
 	struct ath_txq *txq;
+	struct ath_node *an;
 	int if_id;
 	enum ath9k_internal_frame_type frame_type;
 	u8 paprd;
@@ -291,12 +280,11 @@ struct ath_tx_control {
 struct ath_tx {
 	u16 seq_no;
 	u32 txqsetup;
-	int hwq_map[WME_NUM_AC];
 	spinlock_t txbuflock;
 	struct list_head txbuf;
 	struct ath_txq txq[ATH9K_NUM_TX_QUEUES];
 	struct ath_descdma txdma;
-	int pending_frames[WME_NUM_AC];
+	struct ath_txq *txq_map[WME_NUM_AC];
 };
 
 struct ath_rx_edma {
@@ -310,7 +298,6 @@ struct ath_rx {
 	u8 rxotherant;
 	u32 *rxlink;
 	unsigned int rxfilter;
-	spinlock_t pcu_lock;
 	spinlock_t rxbuflock;
 	struct list_head rxbuf;
 	struct ath_descdma rxdma;
@@ -327,8 +314,7 @@ void ath_rx_cleanup(struct ath_softc *sc);
 int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp);
 struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype);
 void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq);
-int ath_tx_setup(struct ath_softc *sc, int haltype);
-void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx);
+bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx);
 void ath_draintxq(struct ath_softc *sc,
 		     struct ath_txq *txq, bool retry_tx);
 void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an);
@@ -342,7 +328,6 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 		 struct ath_tx_control *txctl);
 void ath_tx_tasklet(struct ath_softc *sc);
 void ath_tx_edma_tasklet(struct ath_softc *sc);
-void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb);
 int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
 		      u16 tid, u16 *ssn);
 void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
@@ -563,6 +548,7 @@ struct ath_ant_comb {
 #define SC_OP_BT_PRIORITY_DETECTED   BIT(12)
 #define SC_OP_BT_SCAN		     BIT(13)
 #define SC_OP_ANI_RUN		     BIT(14)
+#define SC_OP_ENABLE_APM	     BIT(15)
 
 /* Powersave flags */
 #define PS_WAIT_FOR_BEACON        BIT(0)
@@ -600,13 +586,14 @@ struct ath_softc {
 	struct ath_hw *sc_ah;
 	void __iomem *mem;
 	int irq;
-	spinlock_t sc_resetlock;
 	spinlock_t sc_serial_rw;
 	spinlock_t sc_pm_lock;
+	spinlock_t sc_pcu_lock;
 	struct mutex mutex;
 	struct work_struct paprd_work;
 	struct work_struct hw_check_work;
 	struct completion paprd_complete;
+	bool paprd_pending;
 
 	u32 intrstatus;
 	u32 sc_flags; /* SC_OP_* */
@@ -646,6 +633,8 @@ struct ath_softc {
 	struct ath_descdma txsdma;
 
 	struct ath_ant_comb ant_comb;
+
+	struct pm_qos_request_list pm_qos_req;
 };
 
 struct ath_wiphy {
@@ -662,11 +651,11 @@ struct ath_wiphy {
 	bool idle;
 	int chan_idx;
 	int chan_is_ht;
+	int last_rssi;
 };
 
 void ath9k_tasklet(unsigned long data);
 int ath_reset(struct ath_softc *sc, bool retry_tx);
-int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
 int ath_cabq_update(struct ath_softc *);
 
 static inline void ath_read_cachesize(struct ath_common *common, int *csz)
@@ -675,17 +664,19 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz)
 }
 
 extern struct ieee80211_ops ath9k_ops;
-extern int modparam_nohwcrypt;
+extern int ath9k_modparam_nohwcrypt;
 extern int led_blink;
+extern int ath9k_pm_qos_value;
+extern bool is_ath9k_unloaded;
 
 irqreturn_t ath_isr(int irq, void *dev);
+void ath9k_init_crypto(struct ath_softc *sc);
 int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
 		    const struct ath_bus_ops *bus_ops);
 void ath9k_deinit_device(struct ath_softc *sc);
 void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw);
 void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
 			   struct ath9k_channel *ichan);
-void ath_update_chainmask(struct ath_softc *sc, int is_ht);
 int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 		    struct ath9k_channel *hchan);
 
@@ -712,10 +703,12 @@ static inline void ath_ahb_exit(void) {};
 void ath9k_ps_wakeup(struct ath_softc *sc);
 void ath9k_ps_restore(struct ath_softc *sc);
 
+u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate);
+
 void ath9k_set_bssid_mask(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 int ath9k_wiphy_add(struct ath_softc *sc);
 int ath9k_wiphy_del(struct ath_wiphy *aphy);
-void ath9k_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb);
+void ath9k_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, int ftype);
 int ath9k_wiphy_pause(struct ath_wiphy *aphy);
 int ath9k_wiphy_unpause(struct ath_wiphy *aphy);
 int ath9k_wiphy_select(struct ath_wiphy *aphy);
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 19891e7d49a..385ba03134b 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -28,7 +28,7 @@ int ath_beaconq_config(struct ath_softc *sc)
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_tx_queue_info qi, qi_be;
-	int qnum;
+	struct ath_txq *txq;
 
 	ath9k_hw_get_txq_props(ah, sc->beacon.beaconq, &qi);
 	if (sc->sc_ah->opmode == NL80211_IFTYPE_AP) {
@@ -38,16 +38,16 @@ int ath_beaconq_config(struct ath_softc *sc)
 		qi.tqi_cwmax = 0;
 	} else {
 		/* Adhoc mode; important thing is to use 2x cwmin. */
-		qnum = sc->tx.hwq_map[WME_AC_BE];
-		ath9k_hw_get_txq_props(ah, qnum, &qi_be);
+		txq = sc->tx.txq_map[WME_AC_BE];
+		ath9k_hw_get_txq_props(ah, txq->axq_qnum, &qi_be);
 		qi.tqi_aifs = qi_be.tqi_aifs;
 		qi.tqi_cwmin = 4*qi_be.tqi_cwmin;
 		qi.tqi_cwmax = qi_be.tqi_cwmax;
 	}
 
 	if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to update h/w beacon queue parameters\n");
+		ath_err(common,
+			"Unable to update h/w beacon queue parameters\n");
 		return 0;
 	} else {
 		ath9k_hw_resettxqueue(ah, sc->beacon.beaconq);
@@ -103,12 +103,32 @@ static void ath_beacon_setup(struct ath_softc *sc, struct ath_vif *avp,
 	memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4);
 	series[0].Tries = 1;
 	series[0].Rate = rate;
-	series[0].ChSel = common->tx_chainmask;
+	series[0].ChSel = ath_txchainmask_reduction(sc,
+			common->tx_chainmask, series[0].Rate);
 	series[0].RateFlags = (ctsrate) ? ATH9K_RATESERIES_RTS_CTS : 0;
 	ath9k_hw_set11n_ratescenario(ah, ds, ds, 0, ctsrate, ctsduration,
 				     series, 4, 0);
 }
 
+static void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	struct ath_tx_control txctl;
+
+	memset(&txctl, 0, sizeof(struct ath_tx_control));
+	txctl.txq = sc->beacon.cabq;
+
+	ath_dbg(common, ATH_DBG_XMIT,
+		"transmitting CABQ packet, skb: %p\n", skb);
+
+	if (ath_tx_start(hw, skb, &txctl) != 0) {
+		ath_dbg(common, ATH_DBG_XMIT, "CABQ TX failed\n");
+		dev_kfree_skb_any(skb);
+	}
+}
+
 static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
 					   struct ieee80211_vif *vif)
 {
@@ -169,8 +189,7 @@ static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
 		dev_kfree_skb_any(skb);
 		bf->bf_mpdu = NULL;
 		bf->bf_buf_addr = 0;
-		ath_print(common, ATH_DBG_FATAL,
-			  "dma_mapping_error on beaconing\n");
+		ath_err(common, "dma_mapping_error on beaconing\n");
 		return NULL;
 	}
 
@@ -190,8 +209,8 @@ static struct ath_buf *ath_beacon_generate(struct ieee80211_hw *hw,
 
 	if (skb && cabq_depth) {
 		if (sc->nvifs > 1) {
-			ath_print(common, ATH_DBG_BEACON,
-				  "Flushing previous cabq traffic\n");
+			ath_dbg(common, ATH_DBG_BEACON,
+				"Flushing previous cabq traffic\n");
 			ath_draintxq(sc, cabq, false);
 		}
 	}
@@ -263,7 +282,7 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 	/* NB: the beacon data buffer must be 32-bit aligned. */
 	skb = ieee80211_beacon_get(sc->hw, vif);
 	if (skb == NULL) {
-		ath_print(common, ATH_DBG_BEACON, "cannot get skb\n");
+		ath_dbg(common, ATH_DBG_BEACON, "cannot get skb\n");
 		return -ENOMEM;
 	}
 
@@ -287,10 +306,9 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 		tsfadjust = intval * avp->av_bslot / ATH_BCBUF;
 		avp->tsf_adjust = cpu_to_le64(TU_TO_USEC(tsfadjust));
 
-		ath_print(common, ATH_DBG_BEACON,
-			  "stagger beacons, bslot %d intval "
-			  "%u tsfadjust %llu\n",
-			  avp->av_bslot, intval, (unsigned long long)tsfadjust);
+		ath_dbg(common, ATH_DBG_BEACON,
+			"stagger beacons, bslot %d intval %u tsfadjust %llu\n",
+			avp->av_bslot, intval, (unsigned long long)tsfadjust);
 
 		((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp =
 			avp->tsf_adjust;
@@ -304,8 +322,7 @@ int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 		dev_kfree_skb_any(skb);
 		bf->bf_mpdu = NULL;
 		bf->bf_buf_addr = 0;
-		ath_print(common, ATH_DBG_FATAL,
-			  "dma_mapping_error on beacon alloc\n");
+		ath_err(common, "dma_mapping_error on beacon alloc\n");
 		return -ENOMEM;
 	}
 
@@ -362,13 +379,13 @@ void ath_beacon_tasklet(unsigned long data)
 		sc->beacon.bmisscnt++;
 
 		if (sc->beacon.bmisscnt < BSTUCK_THRESH) {
-			ath_print(common, ATH_DBG_BSTUCK,
-				  "missed %u consecutive beacons\n",
-				  sc->beacon.bmisscnt);
+			ath_dbg(common, ATH_DBG_BSTUCK,
+				"missed %u consecutive beacons\n",
+				sc->beacon.bmisscnt);
 			ath9k_hw_bstuck_nfcal(ah);
 		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
-			ath_print(common, ATH_DBG_BSTUCK,
-				  "beacon is officially stuck\n");
+			ath_dbg(common, ATH_DBG_BSTUCK,
+				"beacon is officially stuck\n");
 			sc->sc_flags |= SC_OP_TSF_RESET;
 			ath_reset(sc, true);
 		}
@@ -377,9 +394,9 @@ void ath_beacon_tasklet(unsigned long data)
 	}
 
 	if (sc->beacon.bmisscnt != 0) {
-		ath_print(common, ATH_DBG_BSTUCK,
-			  "resume beacon xmit after %u misses\n",
-			  sc->beacon.bmisscnt);
+		ath_dbg(common, ATH_DBG_BSTUCK,
+			"resume beacon xmit after %u misses\n",
+			sc->beacon.bmisscnt);
 		sc->beacon.bmisscnt = 0;
 	}
 
@@ -405,9 +422,9 @@ void ath_beacon_tasklet(unsigned long data)
 	vif = sc->beacon.bslot[slot];
 	aphy = sc->beacon.bslot_aphy[slot];
 
-	ath_print(common, ATH_DBG_BEACON,
-		  "slot %d [tsf %llu tsftu %u intval %u] vif %p\n",
-		  slot, tsf, tsftu, intval, vif);
+	ath_dbg(common, ATH_DBG_BEACON,
+		"slot %d [tsf %llu tsftu %u intval %u] vif %p\n",
+		slot, tsf, tsftu, intval, vif);
 
 	bfaddr = 0;
 	if (vif) {
@@ -449,8 +466,8 @@ void ath_beacon_tasklet(unsigned long data)
 		 * are still pending on the queue.
 		 */
 		if (!ath9k_hw_stoptxdma(ah, sc->beacon.beaconq)) {
-			ath_print(common, ATH_DBG_FATAL,
-				"beacon queue %u did not stop?\n", sc->beacon.beaconq);
+			ath_err(common, "beacon queue %u did not stop?\n",
+				sc->beacon.beaconq);
 		}
 
 		/* NB: cabq traffic should already be queued and primed */
@@ -503,7 +520,7 @@ static void ath_beacon_config_ap(struct ath_softc *sc,
 
 	/* Set the computed AP beacon timers */
 
-	ath9k_hw_set_interrupts(ah, 0);
+	ath9k_hw_disable_interrupts(ah);
 	ath9k_beacon_init(sc, nexttbtt, intval);
 	sc->beacon.bmisscnt = 0;
 	ath9k_hw_set_interrupts(ah, ah->imask);
@@ -536,8 +553,8 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 
 	/* No need to configure beacon if we are not associated */
 	if (!common->curaid) {
-		ath_print(common, ATH_DBG_BEACON,
-			 "STA is not yet associated..skipping beacon config\n");
+		ath_dbg(common, ATH_DBG_BEACON,
+			"STA is not yet associated..skipping beacon config\n");
 		return;
 	}
 
@@ -549,8 +566,6 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 	 * last beacon we received (which may be none).
 	 */
 	dtimperiod = conf->dtim_period;
-	if (dtimperiod <= 0)		/* NB: 0 if not known */
-		dtimperiod = 1;
 	dtimcount = conf->dtim_count;
 	if (dtimcount >= dtimperiod)	/* NB: sanity check */
 		dtimcount = 0;
@@ -558,8 +573,6 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 	cfpcount = 0;
 
 	sleepduration = conf->listen_interval * intval;
-	if (sleepduration <= 0)
-		sleepduration = intval;
 
 	/*
 	 * Pull nexttbtt forward to reflect the current
@@ -630,23 +643,22 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 	/* TSF out of range threshold fixed at 1 second */
 	bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
 
-	ath_print(common, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
-	ath_print(common, ATH_DBG_BEACON,
-		  "bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
-		  bs.bs_bmissthreshold, bs.bs_sleepduration,
-		  bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
+	ath_dbg(common, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
+	ath_dbg(common, ATH_DBG_BEACON,
+		"bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
+		bs.bs_bmissthreshold, bs.bs_sleepduration,
+		bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
 
 	/* Set the computed STA beacon timers */
 
-	ath9k_hw_set_interrupts(ah, 0);
+	ath9k_hw_disable_interrupts(ah);
 	ath9k_hw_set_sta_beacon_timers(ah, &bs);
 	ah->imask |= ATH9K_INT_BMISS;
 	ath9k_hw_set_interrupts(ah, ah->imask);
 }
 
 static void ath_beacon_config_adhoc(struct ath_softc *sc,
-				    struct ath_beacon_config *conf,
-				    struct ieee80211_vif *vif)
+				    struct ath_beacon_config *conf)
 {
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
@@ -670,9 +682,9 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 		nexttbtt += intval;
 	} while (nexttbtt < tsftu);
 
-	ath_print(common, ATH_DBG_BEACON,
-		  "IBSS nexttbtt %u intval %u (%u)\n",
-		  nexttbtt, intval, conf->beacon_interval);
+	ath_dbg(common, ATH_DBG_BEACON,
+		"IBSS nexttbtt %u intval %u (%u)\n",
+		nexttbtt, intval, conf->beacon_interval);
 
 	/*
 	 * In IBSS mode enable the beacon timers but only enable SWBA interrupts
@@ -686,7 +698,7 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 
 	/* Set the computed ADHOC beacon timers */
 
-	ath9k_hw_set_interrupts(ah, 0);
+	ath9k_hw_disable_interrupts(ah);
 	ath9k_beacon_init(sc, nexttbtt, intval);
 	sc->beacon.bmisscnt = 0;
 	ath9k_hw_set_interrupts(ah, ah->imask);
@@ -701,18 +713,17 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 	/* Setup the beacon configuration parameters */
 	if (vif) {
 		struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
-
 		iftype = vif->type;
-
 		cur_conf->beacon_interval = bss_conf->beacon_int;
 		cur_conf->dtim_period = bss_conf->dtim_period;
+	} else {
+		iftype = sc->sc_ah->opmode;
+	}
+
 		cur_conf->listen_interval = 1;
 		cur_conf->dtim_count = 1;
 		cur_conf->bmiss_timeout =
 			ATH_DEFAULT_BMISS_LIMIT * cur_conf->beacon_interval;
-	} else {
-		iftype = sc->sc_ah->opmode;
-	}
 
 	/*
 	 * It looks like mac80211 may end up using beacon interval of zero in
@@ -723,20 +734,27 @@ void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 	if (cur_conf->beacon_interval == 0)
 		cur_conf->beacon_interval = 100;
 
+	/*
+	 * Some times we dont parse dtim period from mac80211, in that case
+	 * use a default value
+	 */
+	if (cur_conf->dtim_period == 0)
+		cur_conf->dtim_period = 1;
+
 	switch (iftype) {
 	case NL80211_IFTYPE_AP:
 		ath_beacon_config_ap(sc, cur_conf);
 		break;
 	case NL80211_IFTYPE_ADHOC:
 	case NL80211_IFTYPE_MESH_POINT:
-		ath_beacon_config_adhoc(sc, cur_conf, vif);
+		ath_beacon_config_adhoc(sc, cur_conf);
 		break;
 	case NL80211_IFTYPE_STATION:
 		ath_beacon_config_sta(sc, cur_conf);
 		break;
 	default:
-		ath_print(common, ATH_DBG_CONFIG,
-			  "Unsupported beaconing mode\n");
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"Unsupported beaconing mode\n");
 		return;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
index 6a92e57fddf..d33bf204c99 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.c
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -35,29 +35,6 @@ struct ath_btcoex_config {
 	bool bt_hold_rx_clear;
 };
 
-static const u16 ath_subsysid_tbl[] = {
-	AR9280_COEX2WIRE_SUBSYSID,
-	AT9285_COEX3WIRE_SA_SUBSYSID,
-	AT9285_COEX3WIRE_DA_SUBSYSID
-};
-
-/*
- * Checks the subsystem id of the device to see if it
- * supports btcoex
- */
-bool ath9k_hw_btcoex_supported(struct ath_hw *ah)
-{
-	int i;
-
-	if (!ah->hw_version.subsysid)
-		return false;
-
-	for (i = 0; i < ARRAY_SIZE(ath_subsysid_tbl); i++)
-		if (ah->hw_version.subsysid == ath_subsysid_tbl[i])
-			return true;
-
-	return false;
-}
 
 void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum)
 {
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index 1ee5a15ccbb..588dfd464dd 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -49,7 +49,6 @@ struct ath_btcoex_hw {
 	u32 bt_coex_mode2; 	/* Register setting for AR_BT_COEX_MODE2 */
 };
 
-bool ath9k_hw_btcoex_supported(struct ath_hw *ah);
 void ath9k_hw_btcoex_init_2wire(struct ath_hw *ah);
 void ath9k_hw_btcoex_init_3wire(struct ath_hw *ah);
 void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum);
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 6d509484b5f..b68a1acbddd 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -97,12 +97,12 @@ static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah,
 		if (h[i].privNF > limit->max) {
 			high_nf_mid = true;
 
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "NFmid[%d] (%d) > MAX (%d), %s\n",
-				  i, h[i].privNF, limit->max,
-				  (cal->nfcal_interference ?
-				   "not corrected (due to interference)" :
-				   "correcting to MAX"));
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"NFmid[%d] (%d) > MAX (%d), %s\n",
+				i, h[i].privNF, limit->max,
+				(cal->nfcal_interference ?
+				 "not corrected (due to interference)" :
+				 "correcting to MAX"));
 
 			/*
 			 * Normally we limit the average noise floor by the
@@ -180,18 +180,18 @@ bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
 		return true;
 
 	if (currCal->calState != CAL_DONE) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "Calibration state incorrect, %d\n",
-			  currCal->calState);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Calibration state incorrect, %d\n",
+			currCal->calState);
 		return true;
 	}
 
 	if (!(ah->supp_cals & currCal->calData->calType))
 		return true;
 
-	ath_print(common, ATH_DBG_CALIBRATE,
-		  "Resetting Cal %d state for channel %u\n",
-		  currCal->calData->calType, conf->channel->center_freq);
+	ath_dbg(common, ATH_DBG_CALIBRATE,
+		"Resetting Cal %d state for channel %u\n",
+		currCal->calData->calType, conf->channel->center_freq);
 
 	ah->caldata->CalValid &= ~currCal->calData->calType;
 	currCal->calState = CAL_WAITING;
@@ -279,9 +279,9 @@ void ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	 * noisefloor until the next calibration timer.
 	 */
 	if (j == 1000) {
-		ath_print(common, ATH_DBG_ANY, "Timeout while waiting for nf "
-			  "to load: AR_PHY_AGC_CONTROL=0x%x\n",
-			  REG_READ(ah, AR_PHY_AGC_CONTROL));
+		ath_dbg(common, ATH_DBG_ANY,
+			"Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n",
+			REG_READ(ah, AR_PHY_AGC_CONTROL));
 		return;
 	}
 
@@ -318,19 +318,19 @@ static void ath9k_hw_nf_sanitize(struct ath_hw *ah, s16 *nf)
 		if (!nf[i])
 			continue;
 
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "NF calibrated [%s] [chain %d] is %d\n",
-			  (i >= 3 ? "ext" : "ctl"), i % 3, nf[i]);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"NF calibrated [%s] [chain %d] is %d\n",
+			(i >= 3 ? "ext" : "ctl"), i % 3, nf[i]);
 
 		if (nf[i] > ATH9K_NF_TOO_HIGH) {
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "NF[%d] (%d) > MAX (%d), correcting to MAX",
-				  i, nf[i], ATH9K_NF_TOO_HIGH);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"NF[%d] (%d) > MAX (%d), correcting to MAX\n",
+				i, nf[i], ATH9K_NF_TOO_HIGH);
 			nf[i] = limit->max;
 		} else if (nf[i] < limit->min) {
-			ath_print(common, ATH_DBG_CALIBRATE,
-				  "NF[%d] (%d) < MIN (%d), correcting to NOM",
-				  i, nf[i], limit->min);
+			ath_dbg(common, ATH_DBG_CALIBRATE,
+				"NF[%d] (%d) < MIN (%d), correcting to NOM\n",
+				i, nf[i], limit->min);
 			nf[i] = limit->nominal;
 		}
 	}
@@ -347,8 +347,8 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan)
 
 	chan->channelFlags &= (~CHANNEL_CW_INT);
 	if (REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "NF did not complete in calibration window\n");
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"NF did not complete in calibration window\n");
 		return false;
 	}
 
@@ -357,10 +357,9 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan)
 	nf = nfarray[0];
 	if (ath9k_hw_get_nf_thresh(ah, c->band, &nfThresh)
 	    && nf > nfThresh) {
-		ath_print(common, ATH_DBG_CALIBRATE,
-			  "noise floor failed detected; "
-			  "detected %d, threshold %d\n",
-			  nf, nfThresh);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"noise floor failed detected; detected %d, threshold %d\n",
+			nf, nfThresh);
 		chan->channelFlags |= CHANNEL_CW_INT;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c
index f43a2d98421..df1998d4825 100644
--- a/drivers/net/wireless/ath/ath9k/common.c
+++ b/drivers/net/wireless/ath/ath9k/common.c
@@ -107,12 +107,10 @@ static u32 ath9k_get_extchanmode(struct ieee80211_channel *chan,
 /*
  * Update internal channel flags.
  */
-void ath9k_cmn_update_ichannel(struct ieee80211_hw *hw,
-			       struct ath9k_channel *ichan)
+void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
+			       struct ieee80211_channel *chan,
+			       enum nl80211_channel_type channel_type)
 {
-	struct ieee80211_channel *chan = hw->conf.channel;
-	struct ieee80211_conf *conf = &hw->conf;
-
 	ichan->channel = chan->center_freq;
 	ichan->chan = chan;
 
@@ -124,9 +122,8 @@ void ath9k_cmn_update_ichannel(struct ieee80211_hw *hw,
 		ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
 	}
 
-	if (conf_is_ht(conf))
-		ichan->chanmode = ath9k_get_extchanmode(chan,
-							conf->channel_type);
+	if (channel_type != NL80211_CHAN_NO_HT)
+		ichan->chanmode = ath9k_get_extchanmode(chan, channel_type);
 }
 EXPORT_SYMBOL(ath9k_cmn_update_ichannel);
 
@@ -142,7 +139,7 @@ struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw,
 
 	chan_idx = curchan->hw_value;
 	channel = &ah->channels[chan_idx];
-	ath9k_cmn_update_ichannel(hw, channel);
+	ath9k_cmn_update_ichannel(channel, curchan, hw->conf.channel_type);
 
 	return channel;
 }
@@ -183,8 +180,8 @@ void ath9k_cmn_btcoex_bt_stomp(struct ath_common *common,
 					   AR_STOMP_NONE_WLAN_WGHT);
 		break;
 	default:
-		ath_print(common, ATH_DBG_BTCOEX,
-			  "Invalid Stomptype\n");
+		ath_dbg(common, ATH_DBG_BTCOEX,
+			"Invalid Stomptype\n");
 		break;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/common.h b/drivers/net/wireless/ath/ath9k/common.h
index fea3b331539..a126bddebb0 100644
--- a/drivers/net/wireless/ath/ath9k/common.h
+++ b/drivers/net/wireless/ath/ath9k/common.h
@@ -17,7 +17,6 @@
 #include <net/mac80211.h>
 
 #include "../ath.h"
-#include "../debug.h"
 
 #include "hw.h"
 #include "hw-ops.h"
@@ -31,10 +30,11 @@
 #define WME_MAX_BA              WME_BA_BMP_SIZE
 #define ATH_TID_MAX_BUFS        (2 * WME_MAX_BA)
 
-#define WME_AC_BE   0
-#define WME_AC_BK   1
-#define WME_AC_VI   2
-#define WME_AC_VO   3
+/* These must match mac80211 skb queue mapping numbers */
+#define WME_AC_VO   0
+#define WME_AC_VI   1
+#define WME_AC_BE   2
+#define WME_AC_BK   3
 #define WME_NUM_AC  4
 
 #define ATH_RSSI_DUMMY_MARKER   0x127
@@ -62,8 +62,9 @@ enum ath_stomp_type {
 
 int ath9k_cmn_padpos(__le16 frame_control);
 int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb);
-void ath9k_cmn_update_ichannel(struct ieee80211_hw *hw,
-			       struct ath9k_channel *ichan);
+void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
+			       struct ieee80211_channel *chan,
+			       enum nl80211_channel_type channel_type);
 struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw,
 					       struct ath_hw *ah);
 int ath9k_cmn_count_streams(unsigned int chainmask, int max);
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 43e71a944cb..3586c43077a 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -24,8 +24,6 @@
 #define REG_READ_D(_ah, _reg) \
 	ath9k_hw_common(_ah)->ops->read((_ah), (_reg))
 
-static struct dentry *ath9k_debugfs_root;
-
 static int ath9k_debugfs_open(struct inode *inode, struct file *file)
 {
 	file->private_data = inode->i_private;
@@ -461,16 +459,16 @@ static ssize_t read_file_wiphy(struct file *file, char __user *user_buf,
 
 	/* Put variable-length stuff down here, and check for overflows. */
 	for (i = 0; i < sc->num_sec_wiphy; i++) {
-		struct ath_wiphy *aphy = sc->sec_wiphy[i];
-		if (aphy == NULL)
+		struct ath_wiphy *aphy_tmp = sc->sec_wiphy[i];
+		if (aphy_tmp == NULL)
 			continue;
-		chan = aphy->hw->conf.channel;
+		chan = aphy_tmp->hw->conf.channel;
 		len += snprintf(buf + len, sizeof(buf) - len,
 			"secondary: %s (%s chan=%d ht=%d)\n",
-			wiphy_name(aphy->hw->wiphy),
-			ath_wiphy_state_str(aphy->state),
+			wiphy_name(aphy_tmp->hw->wiphy),
+			ath_wiphy_state_str(aphy_tmp->state),
 			ieee80211_frequency_to_channel(chan->center_freq),
-			aphy->chan_is_ht);
+						       aphy_tmp->chan_is_ht);
 	}
 	if (len > sizeof(buf))
 		len = sizeof(buf);
@@ -585,10 +583,10 @@ static const struct file_operations fops_wiphy = {
 	do {								\
 		len += snprintf(buf + len, size - len,			\
 				"%s%13u%11u%10u%10u\n", str,		\
-		sc->debug.stats.txstats[sc->tx.hwq_map[WME_AC_BE]].elem, \
-		sc->debug.stats.txstats[sc->tx.hwq_map[WME_AC_BK]].elem, \
-		sc->debug.stats.txstats[sc->tx.hwq_map[WME_AC_VI]].elem, \
-		sc->debug.stats.txstats[sc->tx.hwq_map[WME_AC_VO]].elem); \
+		sc->debug.stats.txstats[WME_AC_BE].elem, \
+		sc->debug.stats.txstats[WME_AC_BK].elem, \
+		sc->debug.stats.txstats[WME_AC_VI].elem, \
+		sc->debug.stats.txstats[WME_AC_VO].elem); \
 } while(0)
 
 static ssize_t read_file_xmit(struct file *file, char __user *user_buf,
@@ -630,33 +628,35 @@ static ssize_t read_file_xmit(struct file *file, char __user *user_buf,
 	return retval;
 }
 
-void ath_debug_stat_tx(struct ath_softc *sc, struct ath_txq *txq,
-		       struct ath_buf *bf, struct ath_tx_status *ts)
+void ath_debug_stat_tx(struct ath_softc *sc, struct ath_buf *bf,
+		       struct ath_tx_status *ts)
 {
-	TX_STAT_INC(txq->axq_qnum, tx_pkts_all);
-	sc->debug.stats.txstats[txq->axq_qnum].tx_bytes_all += bf->bf_mpdu->len;
+	int qnum = skb_get_queue_mapping(bf->bf_mpdu);
+
+	TX_STAT_INC(qnum, tx_pkts_all);
+	sc->debug.stats.txstats[qnum].tx_bytes_all += bf->bf_mpdu->len;
 
 	if (bf_isampdu(bf)) {
 		if (bf_isxretried(bf))
-			TX_STAT_INC(txq->axq_qnum, a_xretries);
+			TX_STAT_INC(qnum, a_xretries);
 		else
-			TX_STAT_INC(txq->axq_qnum, a_completed);
+			TX_STAT_INC(qnum, a_completed);
 	} else {
-		TX_STAT_INC(txq->axq_qnum, completed);
+		TX_STAT_INC(qnum, completed);
 	}
 
 	if (ts->ts_status & ATH9K_TXERR_FIFO)
-		TX_STAT_INC(txq->axq_qnum, fifo_underrun);
+		TX_STAT_INC(qnum, fifo_underrun);
 	if (ts->ts_status & ATH9K_TXERR_XTXOP)
-		TX_STAT_INC(txq->axq_qnum, xtxop);
+		TX_STAT_INC(qnum, xtxop);
 	if (ts->ts_status & ATH9K_TXERR_TIMER_EXPIRED)
-		TX_STAT_INC(txq->axq_qnum, timer_exp);
+		TX_STAT_INC(qnum, timer_exp);
 	if (ts->ts_flags & ATH9K_TX_DESC_CFG_ERR)
-		TX_STAT_INC(txq->axq_qnum, desc_cfg_err);
+		TX_STAT_INC(qnum, desc_cfg_err);
 	if (ts->ts_flags & ATH9K_TX_DATA_UNDERRUN)
-		TX_STAT_INC(txq->axq_qnum, data_underrun);
+		TX_STAT_INC(qnum, data_underrun);
 	if (ts->ts_flags & ATH9K_TX_DELIM_UNDERRUN)
-		TX_STAT_INC(txq->axq_qnum, delim_underrun);
+		TX_STAT_INC(qnum, delim_underrun);
 }
 
 static const struct file_operations fops_xmit = {
@@ -876,11 +876,8 @@ int ath9k_init_debug(struct ath_hw *ah)
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_softc *sc = (struct ath_softc *) common->priv;
 
-	if (!ath9k_debugfs_root)
-		return -ENOENT;
-
-	sc->debug.debugfs_phy = debugfs_create_dir(wiphy_name(sc->hw->wiphy),
-						      ath9k_debugfs_root);
+	sc->debug.debugfs_phy = debugfs_create_dir("ath9k",
+						   sc->hw->wiphy->debugfsdir);
 	if (!sc->debug.debugfs_phy)
 		return -ENOMEM;
 
@@ -933,29 +930,7 @@ int ath9k_init_debug(struct ath_hw *ah)
 	sc->debug.regidx = 0;
 	return 0;
 err:
-	ath9k_exit_debug(ah);
-	return -ENOMEM;
-}
-
-void ath9k_exit_debug(struct ath_hw *ah)
-{
-	struct ath_common *common = ath9k_hw_common(ah);
-	struct ath_softc *sc = (struct ath_softc *) common->priv;
-
 	debugfs_remove_recursive(sc->debug.debugfs_phy);
-}
-
-int ath9k_debug_create_root(void)
-{
-	ath9k_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
-	if (!ath9k_debugfs_root)
-		return -ENOENT;
-
-	return 0;
-}
-
-void ath9k_debug_remove_root(void)
-{
-	debugfs_remove(ath9k_debugfs_root);
-	ath9k_debugfs_root = NULL;
+	sc->debug.debugfs_phy = NULL;
+	return -ENOMEM;
 }
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index bb0823242ba..1e5078bd034 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -164,13 +164,10 @@ struct ath9k_debug {
 };
 
 int ath9k_init_debug(struct ath_hw *ah);
-void ath9k_exit_debug(struct ath_hw *ah);
 
-int ath9k_debug_create_root(void);
-void ath9k_debug_remove_root(void);
 void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status);
-void ath_debug_stat_tx(struct ath_softc *sc, struct ath_txq *txq,
-		       struct ath_buf *bf, struct ath_tx_status *ts);
+void ath_debug_stat_tx(struct ath_softc *sc, struct ath_buf *bf,
+		       struct ath_tx_status *ts);
 void ath_debug_stat_rx(struct ath_softc *sc, struct ath_rx_status *rs);
 
 #else
@@ -180,26 +177,12 @@ static inline int ath9k_init_debug(struct ath_hw *ah)
 	return 0;
 }
 
-static inline void ath9k_exit_debug(struct ath_hw *ah)
-{
-}
-
-static inline int ath9k_debug_create_root(void)
-{
-	return 0;
-}
-
-static inline void ath9k_debug_remove_root(void)
-{
-}
-
 static inline void ath_debug_stat_interrupt(struct ath_softc *sc,
 					    enum ath9k_int status)
 {
 }
 
 static inline void ath_debug_stat_tx(struct ath_softc *sc,
-				     struct ath_txq *txq,
 				     struct ath_buf *bf,
 				     struct ath_tx_status *ts)
 {
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index 1266333f586..d0516315957 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -234,22 +234,22 @@ void ath9k_hw_get_target_powers(struct ath_hw *ah,
 u16 ath9k_hw_get_max_edge_power(u16 freq, struct cal_ctl_edges *pRdEdgesPower,
 				bool is2GHz, int num_band_edges)
 {
-	u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+	u16 twiceMaxEdgePower = MAX_RATE_POWER;
 	int i;
 
 	for (i = 0; (i < num_band_edges) &&
 		     (pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
 		if (freq == ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel, is2GHz)) {
-			twiceMaxEdgePower = pRdEdgesPower[i].tPower;
+			twiceMaxEdgePower = CTL_EDGE_TPOWER(pRdEdgesPower[i].ctl);
 			break;
 		} else if ((i > 0) &&
 			   (freq < ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel,
 						      is2GHz))) {
 			if (ath9k_hw_fbin2freq(pRdEdgesPower[i - 1].bChannel,
 					       is2GHz) < freq &&
-			    pRdEdgesPower[i - 1].flag) {
+			    CTL_EDGE_FLAGS(pRdEdgesPower[i - 1].ctl)) {
 				twiceMaxEdgePower =
-					pRdEdgesPower[i - 1].tPower;
+					CTL_EDGE_TPOWER(pRdEdgesPower[i - 1].ctl);
 			}
 			break;
 		}
@@ -273,12 +273,225 @@ void ath9k_hw_update_regulatory_maxpower(struct ath_hw *ah)
 		regulatory->max_power_level += INCREASE_MAXPOW_BY_THREE_CHAIN;
 		break;
 	default:
-		ath_print(common, ATH_DBG_EEPROM,
-			  "Invalid chainmask configuration\n");
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"Invalid chainmask configuration\n");
 		break;
 	}
 }
 
+void ath9k_hw_get_gain_boundaries_pdadcs(struct ath_hw *ah,
+				struct ath9k_channel *chan,
+				void *pRawDataSet,
+				u8 *bChans, u16 availPiers,
+				u16 tPdGainOverlap,
+				u16 *pPdGainBoundaries, u8 *pPDADCValues,
+				u16 numXpdGains)
+{
+	int i, j, k;
+	int16_t ss;
+	u16 idxL = 0, idxR = 0, numPiers;
+	static u8 vpdTableL[AR5416_NUM_PD_GAINS]
+		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+	static u8 vpdTableR[AR5416_NUM_PD_GAINS]
+		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+	static u8 vpdTableI[AR5416_NUM_PD_GAINS]
+		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
+
+	u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
+	u8 minPwrT4[AR5416_NUM_PD_GAINS];
+	u8 maxPwrT4[AR5416_NUM_PD_GAINS];
+	int16_t vpdStep;
+	int16_t tmpVal;
+	u16 sizeCurrVpdTable, maxIndex, tgtIndex;
+	bool match;
+	int16_t minDelta = 0;
+	struct chan_centers centers;
+	int pdgain_boundary_default;
+	struct cal_data_per_freq *data_def = pRawDataSet;
+	struct cal_data_per_freq_4k *data_4k = pRawDataSet;
+	struct cal_data_per_freq_ar9287 *data_9287 = pRawDataSet;
+	bool eeprom_4k = AR_SREV_9285(ah) || AR_SREV_9271(ah);
+	int intercepts;
+
+	if (AR_SREV_9287(ah))
+		intercepts = AR9287_PD_GAIN_ICEPTS;
+	else
+		intercepts = AR5416_PD_GAIN_ICEPTS;
+
+	memset(&minPwrT4, 0, AR5416_NUM_PD_GAINS);
+	ath9k_hw_get_channel_centers(ah, chan, &centers);
+
+	for (numPiers = 0; numPiers < availPiers; numPiers++) {
+		if (bChans[numPiers] == AR5416_BCHAN_UNUSED)
+			break;
+	}
+
+	match = ath9k_hw_get_lower_upper_index((u8)FREQ2FBIN(centers.synth_center,
+							     IS_CHAN_2GHZ(chan)),
+					       bChans, numPiers, &idxL, &idxR);
+
+	if (match) {
+		if (AR_SREV_9287(ah)) {
+			/* FIXME: array overrun? */
+			for (i = 0; i < numXpdGains; i++) {
+				minPwrT4[i] = data_9287[idxL].pwrPdg[i][0];
+				maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4];
+				ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						data_9287[idxL].pwrPdg[i],
+						data_9287[idxL].vpdPdg[i],
+						intercepts,
+						vpdTableI[i]);
+			}
+		} else if (eeprom_4k) {
+			for (i = 0; i < numXpdGains; i++) {
+				minPwrT4[i] = data_4k[idxL].pwrPdg[i][0];
+				maxPwrT4[i] = data_4k[idxL].pwrPdg[i][4];
+				ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						data_4k[idxL].pwrPdg[i],
+						data_4k[idxL].vpdPdg[i],
+						intercepts,
+						vpdTableI[i]);
+			}
+		} else {
+			for (i = 0; i < numXpdGains; i++) {
+				minPwrT4[i] = data_def[idxL].pwrPdg[i][0];
+				maxPwrT4[i] = data_def[idxL].pwrPdg[i][4];
+				ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						data_def[idxL].pwrPdg[i],
+						data_def[idxL].vpdPdg[i],
+						intercepts,
+						vpdTableI[i]);
+			}
+		}
+	} else {
+		for (i = 0; i < numXpdGains; i++) {
+			if (AR_SREV_9287(ah)) {
+				pVpdL = data_9287[idxL].vpdPdg[i];
+				pPwrL = data_9287[idxL].pwrPdg[i];
+				pVpdR = data_9287[idxR].vpdPdg[i];
+				pPwrR = data_9287[idxR].pwrPdg[i];
+			} else if (eeprom_4k) {
+				pVpdL = data_4k[idxL].vpdPdg[i];
+				pPwrL = data_4k[idxL].pwrPdg[i];
+				pVpdR = data_4k[idxR].vpdPdg[i];
+				pPwrR = data_4k[idxR].pwrPdg[i];
+			} else {
+				pVpdL = data_def[idxL].vpdPdg[i];
+				pPwrL = data_def[idxL].pwrPdg[i];
+				pVpdR = data_def[idxR].vpdPdg[i];
+				pPwrR = data_def[idxR].pwrPdg[i];
+			}
+
+			minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
+
+			maxPwrT4[i] =
+				min(pPwrL[intercepts - 1],
+				    pPwrR[intercepts - 1]);
+
+
+			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						pPwrL, pVpdL,
+						intercepts,
+						vpdTableL[i]);
+			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
+						pPwrR, pVpdR,
+						intercepts,
+						vpdTableR[i]);
+
+			for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
+				vpdTableI[i][j] =
+					(u8)(ath9k_hw_interpolate((u16)
+					     FREQ2FBIN(centers.
+						       synth_center,
+						       IS_CHAN_2GHZ
+						       (chan)),
+					     bChans[idxL], bChans[idxR],
+					     vpdTableL[i][j], vpdTableR[i][j]));
+			}
+		}
+	}
+
+	k = 0;
+
+	for (i = 0; i < numXpdGains; i++) {
+		if (i == (numXpdGains - 1))
+			pPdGainBoundaries[i] =
+				(u16)(maxPwrT4[i] / 2);
+		else
+			pPdGainBoundaries[i] =
+				(u16)((maxPwrT4[i] + minPwrT4[i + 1]) / 4);
+
+		pPdGainBoundaries[i] =
+			min((u16)MAX_RATE_POWER, pPdGainBoundaries[i]);
+
+		if ((i == 0) && !AR_SREV_5416_20_OR_LATER(ah)) {
+			minDelta = pPdGainBoundaries[0] - 23;
+			pPdGainBoundaries[0] = 23;
+		} else {
+			minDelta = 0;
+		}
+
+		if (i == 0) {
+			if (AR_SREV_9280_20_OR_LATER(ah))
+				ss = (int16_t)(0 - (minPwrT4[i] / 2));
+			else
+				ss = 0;
+		} else {
+			ss = (int16_t)((pPdGainBoundaries[i - 1] -
+					(minPwrT4[i] / 2)) -
+				       tPdGainOverlap + 1 + minDelta);
+		}
+		vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]);
+		vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
+
+		while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+			tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep);
+			pPDADCValues[k++] = (u8)((tmpVal < 0) ? 0 : tmpVal);
+			ss++;
+		}
+
+		sizeCurrVpdTable = (u8) ((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
+		tgtIndex = (u8)(pPdGainBoundaries[i] + tPdGainOverlap -
+				(minPwrT4[i] / 2));
+		maxIndex = (tgtIndex < sizeCurrVpdTable) ?
+			tgtIndex : sizeCurrVpdTable;
+
+		while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+			pPDADCValues[k++] = vpdTableI[i][ss++];
+		}
+
+		vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] -
+				    vpdTableI[i][sizeCurrVpdTable - 2]);
+		vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
+
+		if (tgtIndex >= maxIndex) {
+			while ((ss <= tgtIndex) &&
+			       (k < (AR5416_NUM_PDADC_VALUES - 1))) {
+				tmpVal = (int16_t)((vpdTableI[i][sizeCurrVpdTable - 1] +
+						    (ss - maxIndex + 1) * vpdStep));
+				pPDADCValues[k++] = (u8)((tmpVal > 255) ?
+							 255 : tmpVal);
+				ss++;
+			}
+		}
+	}
+
+	if (eeprom_4k)
+		pdgain_boundary_default = 58;
+	else
+		pdgain_boundary_default = pPdGainBoundaries[i - 1];
+
+	while (i < AR5416_PD_GAINS_IN_MASK) {
+		pPdGainBoundaries[i] = pdgain_boundary_default;
+		i++;
+	}
+
+	while (k < AR5416_NUM_PDADC_VALUES) {
+		pPDADCValues[k] = pPDADCValues[k - 1];
+		k++;
+	}
+}
+
 int ath9k_hw_eeprom_init(struct ath_hw *ah)
 {
 	int status;
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index dacb45e1b90..58e2ddc927a 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -17,12 +17,12 @@
 #ifndef EEPROM_H
 #define EEPROM_H
 
+#define AR_EEPROM_MODAL_SPURS   5
+
 #include "../ath.h"
 #include <net/cfg80211.h>
 #include "ar9003_eeprom.h"
 
-#define AH_USE_EEPROM   0x1
-
 #ifdef __BIG_ENDIAN
 #define AR5416_EEPROM_MAGIC 0x5aa5
 #else
@@ -149,8 +149,6 @@
 #define AR5416_NUM_PD_GAINS             4
 #define AR5416_PD_GAINS_IN_MASK         4
 #define AR5416_PD_GAIN_ICEPTS           5
-#define AR5416_EEPROM_MODAL_SPURS       5
-#define AR5416_MAX_RATE_POWER           63
 #define AR5416_NUM_PDADC_VALUES         128
 #define AR5416_BCHAN_UNUSED             0xFF
 #define AR5416_MAX_PWR_RANGE_IN_HALF_DB 64
@@ -175,8 +173,6 @@
 #define AR5416_EEP4K_NUM_CTLS                 12
 #define AR5416_EEP4K_NUM_BAND_EDGES           4
 #define AR5416_EEP4K_NUM_PD_GAINS             2
-#define AR5416_EEP4K_PD_GAINS_IN_MASK         4
-#define AR5416_EEP4K_PD_GAIN_ICEPTS           5
 #define AR5416_EEP4K_MAX_CHAINS               1
 
 #define AR9280_TX_GAIN_TABLE_SIZE 22
@@ -198,41 +194,30 @@
 #define AR9287_NUM_2G_40_TARGET_POWERS  3
 #define AR9287_NUM_CTLS              	12
 #define AR9287_NUM_BAND_EDGES        	4
-#define AR9287_NUM_PD_GAINS             4
-#define AR9287_PD_GAINS_IN_MASK         4
 #define AR9287_PD_GAIN_ICEPTS           1
-#define AR9287_EEPROM_MODAL_SPURS       5
-#define AR9287_MAX_RATE_POWER           63
-#define AR9287_NUM_PDADC_VALUES         128
-#define AR9287_NUM_RATES                16
-#define AR9287_BCHAN_UNUSED             0xFF
-#define AR9287_MAX_PWR_RANGE_IN_HALF_DB 64
-#define AR9287_OPFLAGS_11A              0x01
-#define AR9287_OPFLAGS_11G              0x02
-#define AR9287_OPFLAGS_2G_HT40          0x08
-#define AR9287_OPFLAGS_2G_HT20          0x20
-#define AR9287_OPFLAGS_5G_HT40          0x04
-#define AR9287_OPFLAGS_5G_HT20          0x10
 #define AR9287_EEPMISC_BIG_ENDIAN       0x01
 #define AR9287_EEPMISC_WOW              0x02
 #define AR9287_MAX_CHAINS               2
 #define AR9287_ANT_16S                  32
-#define AR9287_custdatasize             20
-
-#define AR9287_NUM_ANT_CHAIN_FIELDS     6
-#define AR9287_NUM_ANT_COMMON_FIELDS    4
-#define AR9287_SIZE_ANT_CHAIN_FIELD     2
-#define AR9287_SIZE_ANT_COMMON_FIELD    4
-#define AR9287_ANT_CHAIN_MASK           0x3
-#define AR9287_ANT_COMMON_MASK          0xf
-#define AR9287_CHAIN_0_IDX              0
-#define AR9287_CHAIN_1_IDX              1
+
 #define AR9287_DATA_SZ                  32
 
 #define AR9287_PWR_TABLE_OFFSET_DB  -5
 
 #define AR9287_CHECKSUM_LOCATION (AR9287_EEP_START_LOC + 1)
 
+#define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f)
+#define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03)
+
+#define LNA_CTL_BUF_MODE	BIT(0)
+#define LNA_CTL_ISEL_LO		BIT(1)
+#define LNA_CTL_ISEL_HI		BIT(2)
+#define LNA_CTL_BUF_IN		BIT(3)
+#define LNA_CTL_FEM_BAND	BIT(4)
+#define LNA_CTL_LOCAL_BIAS	BIT(5)
+#define LNA_CTL_FORCE_XPA	BIT(6)
+#define LNA_CTL_USE_ANT1	BIT(7)
+
 enum eeprom_param {
 	EEP_NFTHRESH_5,
 	EEP_NFTHRESH_2,
@@ -268,6 +253,7 @@ enum eeprom_param {
 	EEP_PAPRD,
 	EEP_MODAL_VER,
 	EEP_ANT_DIV_CTL1,
+	EEP_CHAIN_MASK_REDUCE
 };
 
 enum ar5416_rates {
@@ -378,15 +364,12 @@ struct modal_eep_header {
 	u8 xatten2Margin[AR5416_MAX_CHAINS];
 	u8 ob_ch1;
 	u8 db_ch1;
-	u8 useAnt1:1,
-	    force_xpaon:1,
-	    local_bias:1,
-	    femBandSelectUsed:1, xlnabufin:1, xlnaisel:2, xlnabufmode:1;
+	u8 lna_ctl;
 	u8 miscBits;
 	u16 xpaBiasLvlFreq[3];
 	u8 futureModal[6];
 
-	struct spur_chan spurChans[AR5416_EEPROM_MODAL_SPURS];
+	struct spur_chan spurChans[AR_EEPROM_MODAL_SPURS];
 } __packed;
 
 struct calDataPerFreqOpLoop {
@@ -454,7 +437,7 @@ struct modal_eep_4k_header {
 	u8 db2_4:4, reserved:4;
 #endif
 	u8 futureModal[4];
-	struct spur_chan spurChans[AR5416_EEPROM_MODAL_SPURS];
+	struct spur_chan spurChans[AR_EEPROM_MODAL_SPURS];
 } __packed;
 
 struct base_eep_ar9287_header {
@@ -512,7 +495,7 @@ struct modal_eep_ar9287_header {
 	u8 ob_qam;
 	u8 ob_pal_off;
 	u8 futureModal[30];
-	struct spur_chan spurChans[AR9287_EEPROM_MODAL_SPURS];
+	struct spur_chan spurChans[AR_EEPROM_MODAL_SPURS];
 } __packed;
 
 struct cal_data_per_freq {
@@ -521,8 +504,8 @@ struct cal_data_per_freq {
 } __packed;
 
 struct cal_data_per_freq_4k {
-	u8 pwrPdg[AR5416_EEP4K_NUM_PD_GAINS][AR5416_EEP4K_PD_GAIN_ICEPTS];
-	u8 vpdPdg[AR5416_EEP4K_NUM_PD_GAINS][AR5416_EEP4K_PD_GAIN_ICEPTS];
+	u8 pwrPdg[AR5416_EEP4K_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
+	u8 vpdPdg[AR5416_EEP4K_NUM_PD_GAINS][AR5416_PD_GAIN_ICEPTS];
 } __packed;
 
 struct cal_target_power_leg {
@@ -535,18 +518,10 @@ struct cal_target_power_ht {
 	u8 tPow2x[8];
 } __packed;
 
-
-#ifdef __BIG_ENDIAN_BITFIELD
 struct cal_ctl_edges {
 	u8 bChannel;
-	u8 flag:2, tPower:6;
+	u8 ctl;
 } __packed;
-#else
-struct cal_ctl_edges {
-	u8 bChannel;
-	u8 tPower:6, flag:2;
-} __packed;
-#endif
 
 struct cal_data_op_loop_ar9287 {
 	u8 pwrPdg[2][5];
@@ -556,8 +531,8 @@ struct cal_data_op_loop_ar9287 {
 } __packed;
 
 struct cal_data_per_freq_ar9287 {
-	u8 pwrPdg[AR9287_NUM_PD_GAINS][AR9287_PD_GAIN_ICEPTS];
-	u8 vpdPdg[AR9287_NUM_PD_GAINS][AR9287_PD_GAIN_ICEPTS];
+	u8 pwrPdg[AR5416_NUM_PD_GAINS][AR9287_PD_GAIN_ICEPTS];
+	u8 vpdPdg[AR5416_NUM_PD_GAINS][AR9287_PD_GAIN_ICEPTS];
 } __packed;
 
 union cal_data_per_freq_ar9287_u {
@@ -672,15 +647,12 @@ struct eeprom_ops {
 	bool (*fill_eeprom)(struct ath_hw *hw);
 	int (*get_eeprom_ver)(struct ath_hw *hw);
 	int (*get_eeprom_rev)(struct ath_hw *hw);
-	u8 (*get_num_ant_config)(struct ath_hw *hw,
-				 enum ath9k_hal_freq_band band);
-	u32 (*get_eeprom_antenna_cfg)(struct ath_hw *hw,
-				      struct ath9k_channel *chan);
 	void (*set_board_values)(struct ath_hw *hw, struct ath9k_channel *chan);
 	void (*set_addac)(struct ath_hw *hw, struct ath9k_channel *chan);
 	void (*set_txpower)(struct ath_hw *hw, struct ath9k_channel *chan,
 			   u16 cfgCtl, u8 twiceAntennaReduction,
-			   u8 twiceMaxRegulatoryPower, u8 powerLimit);
+			   u8 twiceMaxRegulatoryPower, u8 powerLimit,
+			   bool test);
 	u16 (*get_spur_channel)(struct ath_hw *ah, u16 i, bool is2GHz);
 };
 
@@ -713,6 +685,14 @@ u16 ath9k_hw_get_max_edge_power(u16 freq, struct cal_ctl_edges *pRdEdgesPower,
 void ath9k_hw_update_regulatory_maxpower(struct ath_hw *ah);
 int ath9k_hw_eeprom_init(struct ath_hw *ah);
 
+void ath9k_hw_get_gain_boundaries_pdadcs(struct ath_hw *ah,
+				struct ath9k_channel *chan,
+				void *pRawDataSet,
+				u8 *bChans, u16 availPiers,
+				u16 tPdGainOverlap,
+				u16 *pPdGainBoundaries, u8 *pPDADCValues,
+				u16 numXpdGains);
+
 #define ar5416_get_ntxchains(_txchainmask)			\
 	(((_txchainmask >> 2) & 1) +                            \
 	 ((_txchainmask >> 1) & 1) + (_txchainmask & 1))
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
index 4fa4d8e28c6..fbdff7e4795 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -37,14 +37,14 @@ static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah)
 	eep_start_loc = 64;
 
 	if (!ath9k_hw_use_flash(ah)) {
-		ath_print(common, ATH_DBG_EEPROM,
-			  "Reading from EEPROM, not flash\n");
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"Reading from EEPROM, not flash\n");
 	}
 
 	for (addr = 0; addr < SIZE_EEPROM_4K; addr++) {
 		if (!ath9k_hw_nvram_read(common, addr + eep_start_loc, eep_data)) {
-			ath_print(common, ATH_DBG_EEPROM,
-				  "Unable to read eeprom region\n");
+			ath_dbg(common, ATH_DBG_EEPROM,
+				"Unable to read eeprom region\n");
 			return false;
 		}
 		eep_data++;
@@ -69,13 +69,12 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 	if (!ath9k_hw_use_flash(ah)) {
 		if (!ath9k_hw_nvram_read(common, AR5416_EEPROM_MAGIC_OFFSET,
 					 &magic)) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Reading Magic # failed\n");
+			ath_err(common, "Reading Magic # failed\n");
 			return false;
 		}
 
-		ath_print(common, ATH_DBG_EEPROM,
-			  "Read Magic = 0x%04X\n", magic);
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"Read Magic = 0x%04X\n", magic);
 
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
@@ -90,16 +89,15 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 					eepdata++;
 				}
 			} else {
-				ath_print(common, ATH_DBG_FATAL,
-					  "Invalid EEPROM Magic. "
-					  "endianness mismatch.\n");
+				ath_err(common,
+					"Invalid EEPROM Magic. Endianness mismatch.\n");
 				return -EINVAL;
 			}
 		}
 	}
 
-	ath_print(common, ATH_DBG_EEPROM, "need_swap = %s.\n",
-		  need_swap ? "True" : "False");
+	ath_dbg(common, ATH_DBG_EEPROM, "need_swap = %s.\n",
+		need_swap ? "True" : "False");
 
 	if (need_swap)
 		el = swab16(ah->eeprom.map4k.baseEepHeader.length);
@@ -120,8 +118,8 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 		u32 integer;
 		u16 word;
 
-		ath_print(common, ATH_DBG_EEPROM,
-			  "EEPROM Endianness is not native.. Changing\n");
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"EEPROM Endianness is not native.. Changing\n");
 
 		word = swab16(eep->baseEepHeader.length);
 		eep->baseEepHeader.length = word;
@@ -155,7 +153,7 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 			eep->modalHeader.antCtrlChain[i] = integer;
 		}
 
-		for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
+		for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
 			word = swab16(eep->modalHeader.spurChans[i].spurChan);
 			eep->modalHeader.spurChans[i].spurChan = word;
 		}
@@ -163,9 +161,8 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
 	    ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
-			  sum, ah->eep_ops->get_eeprom_ver(ah));
+		ath_err(common, "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+			sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
 	}
 
@@ -230,173 +227,6 @@ static u32 ath9k_hw_4k_get_eeprom(struct ath_hw *ah,
 	}
 }
 
-static void ath9k_hw_get_4k_gain_boundaries_pdadcs(struct ath_hw *ah,
-				struct ath9k_channel *chan,
-				struct cal_data_per_freq_4k *pRawDataSet,
-				u8 *bChans, u16 availPiers,
-				u16 tPdGainOverlap,
-				u16 *pPdGainBoundaries, u8 *pPDADCValues,
-				u16 numXpdGains)
-{
-#define TMP_VAL_VPD_TABLE \
-	((vpdTableI[i][sizeCurrVpdTable - 1] + (ss - maxIndex + 1) * vpdStep));
-	int i, j, k;
-	int16_t ss;
-	u16 idxL = 0, idxR = 0, numPiers;
-	static u8 vpdTableL[AR5416_EEP4K_NUM_PD_GAINS]
-		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-	static u8 vpdTableR[AR5416_EEP4K_NUM_PD_GAINS]
-		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-	static u8 vpdTableI[AR5416_EEP4K_NUM_PD_GAINS]
-		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-
-	u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
-	u8 minPwrT4[AR5416_EEP4K_NUM_PD_GAINS];
-	u8 maxPwrT4[AR5416_EEP4K_NUM_PD_GAINS];
-	int16_t vpdStep;
-	int16_t tmpVal;
-	u16 sizeCurrVpdTable, maxIndex, tgtIndex;
-	bool match;
-	int16_t minDelta = 0;
-	struct chan_centers centers;
-#define PD_GAIN_BOUNDARY_DEFAULT 58;
-
-	memset(&minPwrT4, 0, AR9287_NUM_PD_GAINS);
-	ath9k_hw_get_channel_centers(ah, chan, &centers);
-
-	for (numPiers = 0; numPiers < availPiers; numPiers++) {
-		if (bChans[numPiers] == AR5416_BCHAN_UNUSED)
-			break;
-	}
-
-	match = ath9k_hw_get_lower_upper_index(
-					(u8)FREQ2FBIN(centers.synth_center,
-					IS_CHAN_2GHZ(chan)), bChans, numPiers,
-					&idxL, &idxR);
-
-	if (match) {
-		for (i = 0; i < numXpdGains; i++) {
-			minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
-			maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
-			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
-					pRawDataSet[idxL].pwrPdg[i],
-					pRawDataSet[idxL].vpdPdg[i],
-					AR5416_EEP4K_PD_GAIN_ICEPTS,
-					vpdTableI[i]);
-		}
-	} else {
-		for (i = 0; i < numXpdGains; i++) {
-			pVpdL = pRawDataSet[idxL].vpdPdg[i];
-			pPwrL = pRawDataSet[idxL].pwrPdg[i];
-			pVpdR = pRawDataSet[idxR].vpdPdg[i];
-			pPwrR = pRawDataSet[idxR].pwrPdg[i];
-
-			minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
-
-			maxPwrT4[i] =
-				min(pPwrL[AR5416_EEP4K_PD_GAIN_ICEPTS - 1],
-				    pPwrR[AR5416_EEP4K_PD_GAIN_ICEPTS - 1]);
-
-
-			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
-						pPwrL, pVpdL,
-						AR5416_EEP4K_PD_GAIN_ICEPTS,
-						vpdTableL[i]);
-			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
-						pPwrR, pVpdR,
-						AR5416_EEP4K_PD_GAIN_ICEPTS,
-						vpdTableR[i]);
-
-			for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
-				vpdTableI[i][j] =
-					(u8)(ath9k_hw_interpolate((u16)
-					     FREQ2FBIN(centers.
-						       synth_center,
-						       IS_CHAN_2GHZ
-						       (chan)),
-					     bChans[idxL], bChans[idxR],
-					     vpdTableL[i][j], vpdTableR[i][j]));
-			}
-		}
-	}
-
-	k = 0;
-
-	for (i = 0; i < numXpdGains; i++) {
-		if (i == (numXpdGains - 1))
-			pPdGainBoundaries[i] =
-				(u16)(maxPwrT4[i] / 2);
-		else
-			pPdGainBoundaries[i] =
-				(u16)((maxPwrT4[i] + minPwrT4[i + 1]) / 4);
-
-		pPdGainBoundaries[i] =
-			min((u16)AR5416_MAX_RATE_POWER, pPdGainBoundaries[i]);
-
-		if ((i == 0) && !AR_SREV_5416_20_OR_LATER(ah)) {
-			minDelta = pPdGainBoundaries[0] - 23;
-			pPdGainBoundaries[0] = 23;
-		} else {
-			minDelta = 0;
-		}
-
-		if (i == 0) {
-			if (AR_SREV_9280_20_OR_LATER(ah))
-				ss = (int16_t)(0 - (minPwrT4[i] / 2));
-			else
-				ss = 0;
-		} else {
-			ss = (int16_t)((pPdGainBoundaries[i - 1] -
-					(minPwrT4[i] / 2)) -
-				       tPdGainOverlap + 1 + minDelta);
-		}
-		vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]);
-		vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
-
-		while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
-			tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep);
-			pPDADCValues[k++] = (u8)((tmpVal < 0) ? 0 : tmpVal);
-			ss++;
-		}
-
-		sizeCurrVpdTable = (u8) ((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
-		tgtIndex = (u8)(pPdGainBoundaries[i] + tPdGainOverlap -
-				(minPwrT4[i] / 2));
-		maxIndex = (tgtIndex < sizeCurrVpdTable) ?
-			tgtIndex : sizeCurrVpdTable;
-
-		while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1)))
-			pPDADCValues[k++] = vpdTableI[i][ss++];
-
-		vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] -
-				    vpdTableI[i][sizeCurrVpdTable - 2]);
-		vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
-
-		if (tgtIndex >= maxIndex) {
-			while ((ss <= tgtIndex) &&
-			       (k < (AR5416_NUM_PDADC_VALUES - 1))) {
-				tmpVal = (int16_t) TMP_VAL_VPD_TABLE;
-				pPDADCValues[k++] = (u8)((tmpVal > 255) ?
-							 255 : tmpVal);
-				ss++;
-			}
-		}
-	}
-
-	while (i < AR5416_EEP4K_PD_GAINS_IN_MASK) {
-		pPdGainBoundaries[i] = PD_GAIN_BOUNDARY_DEFAULT;
-		i++;
-	}
-
-	while (k < AR5416_NUM_PDADC_VALUES) {
-		pPDADCValues[k] = pPDADCValues[k - 1];
-		k++;
-	}
-
-	return;
-#undef TMP_VAL_VPD_TABLE
-}
-
 static void ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
 				  int16_t *pTxPowerIndexOffset)
@@ -407,7 +237,7 @@ static void ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 	u8 *pCalBChans = NULL;
 	u16 pdGainOverlap_t2;
 	static u8 pdadcValues[AR5416_NUM_PDADC_VALUES];
-	u16 gainBoundaries[AR5416_EEP4K_PD_GAINS_IN_MASK];
+	u16 gainBoundaries[AR5416_PD_GAINS_IN_MASK];
 	u16 numPiers, i, j;
 	u16 numXpdGain, xpdMask;
 	u16 xpdGainValues[AR5416_EEP4K_NUM_PD_GAINS] = { 0, 0 };
@@ -429,12 +259,12 @@ static void ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 
 	numXpdGain = 0;
 
-	for (i = 1; i <= AR5416_EEP4K_PD_GAINS_IN_MASK; i++) {
-		if ((xpdMask >> (AR5416_EEP4K_PD_GAINS_IN_MASK - i)) & 1) {
+	for (i = 1; i <= AR5416_PD_GAINS_IN_MASK; i++) {
+		if ((xpdMask >> (AR5416_PD_GAINS_IN_MASK - i)) & 1) {
 			if (numXpdGain >= AR5416_EEP4K_NUM_PD_GAINS)
 				break;
 			xpdGainValues[numXpdGain] =
-				(u16)(AR5416_EEP4K_PD_GAINS_IN_MASK - i);
+				(u16)(AR5416_PD_GAINS_IN_MASK - i);
 			numXpdGain++;
 		}
 	}
@@ -458,7 +288,7 @@ static void ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 		if (pEepData->baseEepHeader.txMask & (1 << i)) {
 			pRawDataset = pEepData->calPierData2G[i];
 
-			ath9k_hw_get_4k_gain_boundaries_pdadcs(ah, chan,
+			ath9k_hw_get_gain_boundaries_pdadcs(ah, chan,
 					    pRawDataset, pCalBChans,
 					    numPiers, pdGainOverlap_t2,
 					    gainBoundaries,
@@ -488,21 +318,20 @@ static void ath9k_hw_set_4k_power_cal_table(struct ath_hw *ah,
 					((pdadcValues[4 * j + 3] & 0xFF) << 24);
 				REG_WRITE(ah, regOffset, reg32);
 
-				ath_print(common, ATH_DBG_EEPROM,
-					  "PDADC (%d,%4x): %4.4x %8.8x\n",
-					  i, regChainOffset, regOffset,
-					  reg32);
-				ath_print(common, ATH_DBG_EEPROM,
-					  "PDADC: Chain %d | "
-					  "PDADC %3d Value %3d | "
-					  "PDADC %3d Value %3d | "
-					  "PDADC %3d Value %3d | "
-					  "PDADC %3d Value %3d |\n",
-					  i, 4 * j, pdadcValues[4 * j],
-					  4 * j + 1, pdadcValues[4 * j + 1],
-					  4 * j + 2, pdadcValues[4 * j + 2],
-					  4 * j + 3,
-					  pdadcValues[4 * j + 3]);
+				ath_dbg(common, ATH_DBG_EEPROM,
+					"PDADC (%d,%4x): %4.4x %8.8x\n",
+					i, regChainOffset, regOffset,
+					reg32);
+				ath_dbg(common, ATH_DBG_EEPROM,
+					"PDADC: Chain %d | "
+					"PDADC %3d Value %3d | "
+					"PDADC %3d Value %3d | "
+					"PDADC %3d Value %3d | "
+					"PDADC %3d Value %3d |\n",
+					i, 4 * j, pdadcValues[4 * j],
+					4 * j + 1, pdadcValues[4 * j + 1],
+					4 * j + 2, pdadcValues[4 * j + 2],
+					4 * j + 3, pdadcValues[4 * j + 3]);
 
 				regOffset += 4;
 			}
@@ -532,14 +361,16 @@ static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 	int i;
 	int16_t twiceLargestAntenna;
 	u16 twiceMinEdgePower;
-	u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+	u16 twiceMaxEdgePower = MAX_RATE_POWER;
 	u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
-	u16 numCtlModes, *pCtlMode, ctlMode, freq;
+	u16 numCtlModes;
+	const u16 *pCtlMode;
+	u16 ctlMode, freq;
 	struct chan_centers centers;
 	struct cal_ctl_data_4k *rep;
 	struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
 	static const u16 tpScaleReductionTable[5] =
-		{ 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+		{ 0, 3, 6, 9, MAX_RATE_POWER };
 	struct cal_target_power_leg targetPowerOfdm, targetPowerCck = {
 		0, { 0, 0, 0, 0}
 	};
@@ -550,10 +381,10 @@ static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 	struct cal_target_power_ht targetPowerHt20, targetPowerHt40 = {
 		0, {0, 0, 0, 0}
 	};
-	u16 ctlModesFor11g[] =
-		{ CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
-		  CTL_2GHT40
-		};
+	static const u16 ctlModesFor11g[] = {
+		CTL_11B, CTL_11G, CTL_2GHT20,
+		CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40
+	};
 
 	ath9k_hw_get_channel_centers(ah, chan, &centers);
 
@@ -615,7 +446,7 @@ static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 
 		if (ah->eep_ops->get_eeprom_ver(ah) == 14 &&
 		    ah->eep_ops->get_eeprom_rev(ah) <= 2)
-			twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+			twiceMaxEdgePower = MAX_RATE_POWER;
 
 		for (i = 0; (i < AR5416_EEP4K_NUM_CTLS) &&
 			     pEepData->ctlIndex[i]; i++) {
@@ -726,7 +557,7 @@ static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
 				    u16 cfgCtl,
 				    u8 twiceAntennaReduction,
 				    u8 twiceMaxRegulatoryPower,
-				    u8 powerLimit)
+				    u8 powerLimit, bool test)
 {
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
@@ -751,15 +582,20 @@ static void ath9k_hw_4k_set_txpower(struct ath_hw *ah,
 
 	ath9k_hw_set_4k_power_cal_table(ah, chan, &txPowerIndexOffset);
 
+	regulatory->max_power_level = 0;
 	for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
 		ratesArray[i] =	(int16_t)(txPowerIndexOffset + ratesArray[i]);
-		if (ratesArray[i] > AR5416_MAX_RATE_POWER)
-			ratesArray[i] = AR5416_MAX_RATE_POWER;
+		if (ratesArray[i] > MAX_RATE_POWER)
+			ratesArray[i] = MAX_RATE_POWER;
+
+		if (ratesArray[i] > regulatory->max_power_level)
+			regulatory->max_power_level = ratesArray[i];
 	}
 
+	if (test)
+	    return;
 
 	/* Update regulatory */
-
 	i = rate6mb;
 	if (IS_CHAN_HT40(chan))
 		i = rateHt40_0;
@@ -934,8 +770,7 @@ static void ath9k_hw_4k_set_board_values(struct ath_hw *ah,
 	pModal = &eep->modalHeader;
 	txRxAttenLocal = 23;
 
-	REG_WRITE(ah, AR_PHY_SWITCH_COM,
-		  ah->eep_ops->get_eeprom_antenna_cfg(ah, chan));
+	REG_WRITE(ah, AR_PHY_SWITCH_COM, pModal->antCtrlCommon);
 
 	/* Single chain for 4K EEPROM*/
 	ath9k_hw_4k_set_gain(ah, pModal, eep, txRxAttenLocal);
@@ -1151,21 +986,6 @@ static void ath9k_hw_4k_set_board_values(struct ath_hw *ah,
 	}
 }
 
-static u32 ath9k_hw_4k_get_eeprom_antenna_cfg(struct ath_hw *ah,
-					      struct ath9k_channel *chan)
-{
-	struct ar5416_eeprom_4k *eep = &ah->eeprom.map4k;
-	struct modal_eep_4k_header *pModal = &eep->modalHeader;
-
-	return pModal->antCtrlCommon;
-}
-
-static u8 ath9k_hw_4k_get_num_ant_config(struct ath_hw *ah,
-					 enum ath9k_hal_freq_band freq_band)
-{
-	return 1;
-}
-
 static u16 ath9k_hw_4k_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
 {
 #define EEP_MAP4K_SPURCHAN \
@@ -1174,17 +994,17 @@ static u16 ath9k_hw_4k_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
 
 	u16 spur_val = AR_NO_SPUR;
 
-	ath_print(common, ATH_DBG_ANI,
-		  "Getting spur idx %d is2Ghz. %d val %x\n",
-		  i, is2GHz, ah->config.spurchans[i][is2GHz]);
+	ath_dbg(common, ATH_DBG_ANI,
+		"Getting spur idx:%d is2Ghz:%d val:%x\n",
+		i, is2GHz, ah->config.spurchans[i][is2GHz]);
 
 	switch (ah->config.spurmode) {
 	case SPUR_DISABLE:
 		break;
 	case SPUR_ENABLE_IOCTL:
 		spur_val = ah->config.spurchans[i][is2GHz];
-		ath_print(common, ATH_DBG_ANI,
-			  "Getting spur val from new loc. %d\n", spur_val);
+		ath_dbg(common, ATH_DBG_ANI,
+			"Getting spur val from new loc. %d\n", spur_val);
 		break;
 	case SPUR_ENABLE_EEPROM:
 		spur_val = EEP_MAP4K_SPURCHAN;
@@ -1202,8 +1022,6 @@ const struct eeprom_ops eep_4k_ops = {
 	.fill_eeprom		= ath9k_hw_4k_fill_eeprom,
 	.get_eeprom_ver		= ath9k_hw_4k_get_eeprom_ver,
 	.get_eeprom_rev		= ath9k_hw_4k_get_eeprom_rev,
-	.get_num_ant_config	= ath9k_hw_4k_get_num_ant_config,
-	.get_eeprom_antenna_cfg	= ath9k_hw_4k_get_eeprom_antenna_cfg,
 	.set_board_values	= ath9k_hw_4k_set_board_values,
 	.set_addac		= ath9k_hw_4k_set_addac,
 	.set_txpower		= ath9k_hw_4k_set_txpower,
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index 966b9496a9d..9b6bc8a953b 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -37,21 +37,21 @@ static bool ath9k_hw_ar9287_fill_eeprom(struct ath_hw *ah)
 	int addr, eep_start_loc;
 	eep_data = (u16 *)eep;
 
-	if (ah->hw_version.devid == 0x7015)
+	if (common->bus_ops->ath_bus_type == ATH_USB)
 		eep_start_loc = AR9287_HTC_EEP_START_LOC;
 	else
 		eep_start_loc = AR9287_EEP_START_LOC;
 
 	if (!ath9k_hw_use_flash(ah)) {
-		ath_print(common, ATH_DBG_EEPROM,
-			  "Reading from EEPROM, not flash\n");
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"Reading from EEPROM, not flash\n");
 	}
 
 	for (addr = 0; addr < NUM_EEP_WORDS; addr++) {
 		if (!ath9k_hw_nvram_read(common, addr + eep_start_loc,
 					 eep_data)) {
-			ath_print(common, ATH_DBG_EEPROM,
-				  "Unable to read eeprom region\n");
+			ath_dbg(common, ATH_DBG_EEPROM,
+				"Unable to read eeprom region\n");
 			return false;
 		}
 		eep_data++;
@@ -72,13 +72,12 @@ static int ath9k_hw_ar9287_check_eeprom(struct ath_hw *ah)
 	if (!ath9k_hw_use_flash(ah)) {
 		if (!ath9k_hw_nvram_read(common, AR5416_EEPROM_MAGIC_OFFSET,
 					 &magic)) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Reading Magic # failed\n");
+			ath_err(common, "Reading Magic # failed\n");
 			return false;
 		}
 
-		ath_print(common, ATH_DBG_EEPROM,
-			  "Read Magic = 0x%04X\n", magic);
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"Read Magic = 0x%04X\n", magic);
 
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
@@ -93,16 +92,15 @@ static int ath9k_hw_ar9287_check_eeprom(struct ath_hw *ah)
 					eepdata++;
 				}
 			} else {
-				ath_print(common, ATH_DBG_FATAL,
-					  "Invalid EEPROM Magic. "
-					  "Endianness mismatch.\n");
+				ath_err(common,
+					"Invalid EEPROM Magic. Endianness mismatch.\n");
 				return -EINVAL;
 			}
 		}
 	}
 
-	ath_print(common, ATH_DBG_EEPROM, "need_swap = %s.\n",
-		  need_swap ? "True" : "False");
+	ath_dbg(common, ATH_DBG_EEPROM, "need_swap = %s.\n",
+		need_swap ? "True" : "False");
 
 	if (need_swap)
 		el = swab16(ah->eeprom.map9287.baseEepHeader.length);
@@ -152,7 +150,7 @@ static int ath9k_hw_ar9287_check_eeprom(struct ath_hw *ah)
 			eep->modalHeader.antCtrlChain[i] = integer;
 		}
 
-		for (i = 0; i < AR9287_EEPROM_MODAL_SPURS; i++) {
+		for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
 			word = swab16(eep->modalHeader.spurChans[i].spurChan);
 			eep->modalHeader.spurChans[i].spurChan = word;
 		}
@@ -160,9 +158,8 @@ static int ath9k_hw_ar9287_check_eeprom(struct ath_hw *ah)
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR9287_EEP_VER
 	    || ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
-			   sum, ah->eep_ops->get_eeprom_ver(ah));
+		ath_err(common, "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+			sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
 	}
 
@@ -223,163 +220,6 @@ static u32 ath9k_hw_ar9287_get_eeprom(struct ath_hw *ah,
 	}
 }
 
-static void ath9k_hw_get_ar9287_gain_boundaries_pdadcs(struct ath_hw *ah,
-			       struct ath9k_channel *chan,
-			       struct cal_data_per_freq_ar9287 *pRawDataSet,
-			       u8 *bChans, u16 availPiers,
-			       u16 tPdGainOverlap,
-			       u16 *pPdGainBoundaries,
-			       u8 *pPDADCValues,
-			       u16 numXpdGains)
-{
-#define TMP_VAL_VPD_TABLE						\
-	((vpdTableI[i][sizeCurrVpdTable - 1] + (ss - maxIndex + 1) * vpdStep));
-
-	int i, j, k;
-	int16_t ss;
-	u16 idxL = 0, idxR = 0, numPiers;
-	u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
-	u8 minPwrT4[AR9287_NUM_PD_GAINS];
-	u8 maxPwrT4[AR9287_NUM_PD_GAINS];
-	int16_t vpdStep;
-	int16_t tmpVal;
-	u16 sizeCurrVpdTable, maxIndex, tgtIndex;
-	bool match;
-	int16_t minDelta = 0;
-	struct chan_centers centers;
-	static u8 vpdTableL[AR5416_EEP4K_NUM_PD_GAINS]
-		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-	static u8 vpdTableR[AR5416_EEP4K_NUM_PD_GAINS]
-		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-	static u8 vpdTableI[AR5416_EEP4K_NUM_PD_GAINS]
-		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-
-	memset(&minPwrT4, 0, AR9287_NUM_PD_GAINS);
-	ath9k_hw_get_channel_centers(ah, chan, &centers);
-
-	for (numPiers = 0; numPiers < availPiers; numPiers++) {
-		if (bChans[numPiers] == AR9287_BCHAN_UNUSED)
-			break;
-	}
-
-	match = ath9k_hw_get_lower_upper_index(
-		(u8)FREQ2FBIN(centers.synth_center, IS_CHAN_2GHZ(chan)),
-		bChans, numPiers, &idxL, &idxR);
-
-	if (match) {
-		for (i = 0; i < numXpdGains; i++) {
-			minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
-			maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
-			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
-						pRawDataSet[idxL].pwrPdg[i],
-						pRawDataSet[idxL].vpdPdg[i],
-						AR9287_PD_GAIN_ICEPTS,
-						vpdTableI[i]);
-		}
-	} else {
-		for (i = 0; i < numXpdGains; i++) {
-			pVpdL = pRawDataSet[idxL].vpdPdg[i];
-			pPwrL = pRawDataSet[idxL].pwrPdg[i];
-			pVpdR = pRawDataSet[idxR].vpdPdg[i];
-			pPwrR = pRawDataSet[idxR].pwrPdg[i];
-
-			minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
-
-			maxPwrT4[i] = min(pPwrL[AR9287_PD_GAIN_ICEPTS - 1],
-					  pPwrR[AR9287_PD_GAIN_ICEPTS - 1]);
-
-			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
-						pPwrL, pVpdL,
-						AR9287_PD_GAIN_ICEPTS,
-						vpdTableL[i]);
-			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
-						pPwrR, pVpdR,
-						AR9287_PD_GAIN_ICEPTS,
-						vpdTableR[i]);
-
-			for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
-				vpdTableI[i][j] = (u8)(ath9k_hw_interpolate(
-				       (u16)FREQ2FBIN(centers. synth_center,
-						      IS_CHAN_2GHZ(chan)),
-				       bChans[idxL], bChans[idxR],
-				       vpdTableL[i][j], vpdTableR[i][j]));
-			}
-		}
-	}
-
-	k = 0;
-
-	for (i = 0; i < numXpdGains; i++) {
-		if (i == (numXpdGains - 1))
-			pPdGainBoundaries[i] =
-				(u16)(maxPwrT4[i] / 2);
-		else
-			pPdGainBoundaries[i] =
-				(u16)((maxPwrT4[i] + minPwrT4[i+1]) / 4);
-
-		pPdGainBoundaries[i] = min((u16)AR5416_MAX_RATE_POWER,
-					   pPdGainBoundaries[i]);
-
-
-		minDelta = 0;
-
-		if (i == 0) {
-			if (AR_SREV_9280_20_OR_LATER(ah))
-				ss = (int16_t)(0 - (minPwrT4[i] / 2));
-			else
-				ss = 0;
-		} else {
-			ss = (int16_t)((pPdGainBoundaries[i-1] -
-					(minPwrT4[i] / 2)) -
-				       tPdGainOverlap + 1 + minDelta);
-		}
-
-		vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]);
-		vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
-
-		while ((ss < 0) && (k < (AR9287_NUM_PDADC_VALUES - 1)))	{
-			tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep);
-			pPDADCValues[k++] = (u8)((tmpVal < 0) ? 0 : tmpVal);
-			ss++;
-		}
-
-		sizeCurrVpdTable = (u8)((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
-		tgtIndex = (u8)(pPdGainBoundaries[i] +
-				tPdGainOverlap - (minPwrT4[i] / 2));
-		maxIndex = (tgtIndex < sizeCurrVpdTable) ?
-			    tgtIndex : sizeCurrVpdTable;
-
-		while ((ss < maxIndex) && (k < (AR9287_NUM_PDADC_VALUES - 1)))
-			pPDADCValues[k++] = vpdTableI[i][ss++];
-
-		vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] -
-				    vpdTableI[i][sizeCurrVpdTable - 2]);
-		vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
-
-		if (tgtIndex > maxIndex) {
-			while ((ss <= tgtIndex) &&
-				(k < (AR9287_NUM_PDADC_VALUES - 1))) {
-				tmpVal = (int16_t) TMP_VAL_VPD_TABLE;
-				pPDADCValues[k++] =
-					(u8)((tmpVal > 255) ? 255 : tmpVal);
-				ss++;
-			}
-		}
-	}
-
-	while (i < AR9287_PD_GAINS_IN_MASK) {
-		pPdGainBoundaries[i] = pPdGainBoundaries[i-1];
-		i++;
-	}
-
-	while (k < AR9287_NUM_PDADC_VALUES) {
-		pPDADCValues[k] = pPDADCValues[k-1];
-		k++;
-	}
-
-#undef TMP_VAL_VPD_TABLE
-}
-
 static void ar9287_eeprom_get_tx_gain_index(struct ath_hw *ah,
 			    struct ath9k_channel *chan,
 			    struct cal_data_op_loop_ar9287 *pRawDatasetOpLoop,
@@ -392,7 +232,7 @@ static void ar9287_eeprom_get_tx_gain_index(struct ath_hw *ah,
 	ath9k_hw_get_channel_centers(ah, chan, &centers);
 
 	for (numPiers = 0; numPiers < availPiers; numPiers++) {
-		if (pCalChans[numPiers] == AR9287_BCHAN_UNUSED)
+		if (pCalChans[numPiers] == AR5416_BCHAN_UNUSED)
 			break;
 	}
 
@@ -458,11 +298,11 @@ static void ath9k_hw_set_ar9287_power_cal_table(struct ath_hw *ah,
 	struct cal_data_op_loop_ar9287 *pRawDatasetOpenLoop;
 	u8 *pCalBChans = NULL;
 	u16 pdGainOverlap_t2;
-	u8 pdadcValues[AR9287_NUM_PDADC_VALUES];
-	u16 gainBoundaries[AR9287_PD_GAINS_IN_MASK];
+	u8 pdadcValues[AR5416_NUM_PDADC_VALUES];
+	u16 gainBoundaries[AR5416_PD_GAINS_IN_MASK];
 	u16 numPiers = 0, i, j;
 	u16 numXpdGain, xpdMask;
-	u16 xpdGainValues[AR9287_NUM_PD_GAINS] = {0, 0, 0, 0};
+	u16 xpdGainValues[AR5416_NUM_PD_GAINS] = {0, 0, 0, 0};
 	u32 reg32, regOffset, regChainOffset, regval;
 	int16_t modalIdx, diff = 0;
 	struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
@@ -490,12 +330,12 @@ static void ath9k_hw_set_ar9287_power_cal_table(struct ath_hw *ah,
 	numXpdGain = 0;
 
 	/* Calculate the value of xpdgains from the xpdGain Mask */
-	for (i = 1; i <= AR9287_PD_GAINS_IN_MASK; i++) {
-		if ((xpdMask >> (AR9287_PD_GAINS_IN_MASK - i)) & 1) {
-			if (numXpdGain >= AR9287_NUM_PD_GAINS)
+	for (i = 1; i <= AR5416_PD_GAINS_IN_MASK; i++) {
+		if ((xpdMask >> (AR5416_PD_GAINS_IN_MASK - i)) & 1) {
+			if (numXpdGain >= AR5416_NUM_PD_GAINS)
 				break;
 			xpdGainValues[numXpdGain] =
-				(u16)(AR9287_PD_GAINS_IN_MASK-i);
+				(u16)(AR5416_PD_GAINS_IN_MASK-i);
 			numXpdGain++;
 		}
 	}
@@ -528,7 +368,7 @@ static void ath9k_hw_set_ar9287_power_cal_table(struct ath_hw *ah,
 					(struct cal_data_per_freq_ar9287 *)
 					pEepData->calPierData2G[i];
 
-				ath9k_hw_get_ar9287_gain_boundaries_pdadcs(ah, chan,
+				ath9k_hw_get_gain_boundaries_pdadcs(ah, chan,
 							   pRawDataset,
 							   pCalBChans, numPiers,
 							   pdGainOverlap_t2,
@@ -564,13 +404,13 @@ static void ath9k_hw_set_ar9287_power_cal_table(struct ath_hw *ah,
 					     (int32_t)AR9287_PWR_TABLE_OFFSET_DB);
 				diff *= 2;
 
-				for (j = 0; j < ((u16)AR9287_NUM_PDADC_VALUES-diff); j++)
+				for (j = 0; j < ((u16)AR5416_NUM_PDADC_VALUES-diff); j++)
 					pdadcValues[j] = pdadcValues[j+diff];
 
-				for (j = (u16)(AR9287_NUM_PDADC_VALUES-diff);
-				     j < AR9287_NUM_PDADC_VALUES; j++)
+				for (j = (u16)(AR5416_NUM_PDADC_VALUES-diff);
+				     j < AR5416_NUM_PDADC_VALUES; j++)
 					pdadcValues[j] =
-					  pdadcValues[AR9287_NUM_PDADC_VALUES-diff];
+					  pdadcValues[AR5416_NUM_PDADC_VALUES-diff];
 			}
 
 			if (!ath9k_hw_ar9287_get_eeprom(ah, EEP_OL_PWRCTRL)) {
@@ -613,9 +453,9 @@ static void ath9k_hw_set_ar9287_power_per_rate_table(struct ath_hw *ah,
 #define REDUCE_SCALED_POWER_BY_THREE_CHAIN   10
 
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
-	u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+	u16 twiceMaxEdgePower = MAX_RATE_POWER;
 	static const u16 tpScaleReductionTable[5] =
-		{ 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+		{ 0, 3, 6, 9, MAX_RATE_POWER };
 	int i;
 	int16_t twiceLargestAntenna;
 	struct cal_ctl_data_ar9287 *rep;
@@ -626,13 +466,13 @@ static void ath9k_hw_set_ar9287_power_per_rate_table(struct ath_hw *ah,
 	struct cal_target_power_ht targetPowerHt20,
 				    targetPowerHt40 = {0, {0, 0, 0, 0} };
 	u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
-	u16 ctlModesFor11g[] = {CTL_11B,
-				CTL_11G,
-				CTL_2GHT20,
-				CTL_11B_EXT,
-				CTL_11G_EXT,
-				CTL_2GHT40};
-	u16 numCtlModes = 0, *pCtlMode = NULL, ctlMode, freq;
+	static const u16 ctlModesFor11g[] = {
+		CTL_11B, CTL_11G, CTL_2GHT20,
+		CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40
+	};
+	u16 numCtlModes = 0;
+	const u16 *pCtlMode = NULL;
+	u16 ctlMode, freq;
 	struct chan_centers centers;
 	int tx_chainmask;
 	u16 twiceMinEdgePower;
@@ -853,7 +693,7 @@ static void ath9k_hw_ar9287_set_txpower(struct ath_hw *ah,
 					struct ath9k_channel *chan, u16 cfgCtl,
 					u8 twiceAntennaReduction,
 					u8 twiceMaxRegulatoryPower,
-					u8 powerLimit)
+					u8 powerLimit, bool test)
 {
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
@@ -877,12 +717,26 @@ static void ath9k_hw_ar9287_set_txpower(struct ath_hw *ah,
 
 	ath9k_hw_set_ar9287_power_cal_table(ah, chan, &txPowerIndexOffset);
 
+	regulatory->max_power_level = 0;
 	for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
 		ratesArray[i] = (int16_t)(txPowerIndexOffset + ratesArray[i]);
-		if (ratesArray[i] > AR9287_MAX_RATE_POWER)
-			ratesArray[i] = AR9287_MAX_RATE_POWER;
+		if (ratesArray[i] > MAX_RATE_POWER)
+			ratesArray[i] = MAX_RATE_POWER;
+
+		if (ratesArray[i] > regulatory->max_power_level)
+			regulatory->max_power_level = ratesArray[i];
 	}
 
+	if (test)
+		return;
+
+	if (IS_CHAN_2GHZ(chan))
+		i = rate1l;
+	else
+		i = rate6mb;
+
+	regulatory->max_power_level = ratesArray[i];
+
 	if (AR_SREV_9280_20_OR_LATER(ah)) {
 		for (i = 0; i < Ar5416RateSize; i++)
 			ratesArray[i] -= AR9287_PWR_TABLE_OFFSET_DB * 2;
@@ -971,17 +825,6 @@ static void ath9k_hw_ar9287_set_txpower(struct ath_hw *ah,
 			  | ATH9K_POW_SM(ratesArray[rateDupOfdm], 8)
 			  | ATH9K_POW_SM(ratesArray[rateDupCck], 0));
 	}
-
-	if (IS_CHAN_2GHZ(chan))
-		i = rate1l;
-	else
-		i = rate6mb;
-
-	if (AR_SREV_9280_20_OR_LATER(ah))
-		regulatory->max_power_level =
-			ratesArray[i] + AR9287_PWR_TABLE_OFFSET_DB * 2;
-	else
-		regulatory->max_power_level = ratesArray[i];
 }
 
 static void ath9k_hw_ar9287_set_addac(struct ath_hw *ah,
@@ -1023,8 +866,7 @@ static void ath9k_hw_ar9287_set_board_values(struct ath_hw *ah,
 		antWrites[j++] = (u16)(pModal->antCtrlChain[i] & 0x3);
 	}
 
-	REG_WRITE(ah, AR_PHY_SWITCH_COM,
-		  ah->eep_ops->get_eeprom_antenna_cfg(ah, chan));
+	REG_WRITE(ah, AR_PHY_SWITCH_COM, pModal->antCtrlCommon);
 
 	for (i = 0; i < AR9287_MAX_CHAINS; i++)	{
 		regChainOffset = i * 0x1000;
@@ -1125,21 +967,6 @@ static void ath9k_hw_ar9287_set_board_values(struct ath_hw *ah,
 				  pModal->xpaBiasLvl);
 }
 
-static u8 ath9k_hw_ar9287_get_num_ant_config(struct ath_hw *ah,
-					     enum ath9k_hal_freq_band freq_band)
-{
-	return 1;
-}
-
-static u32 ath9k_hw_ar9287_get_eeprom_antenna_cfg(struct ath_hw *ah,
-						  struct ath9k_channel *chan)
-{
-	struct ar9287_eeprom *eep = &ah->eeprom.map9287;
-	struct modal_eep_ar9287_header *pModal = &eep->modalHeader;
-
-	return pModal->antCtrlCommon;
-}
-
 static u16 ath9k_hw_ar9287_get_spur_channel(struct ath_hw *ah,
 					    u16 i, bool is2GHz)
 {
@@ -1149,17 +976,17 @@ static u16 ath9k_hw_ar9287_get_spur_channel(struct ath_hw *ah,
 	struct ath_common *common = ath9k_hw_common(ah);
 	u16 spur_val = AR_NO_SPUR;
 
-	ath_print(common, ATH_DBG_ANI,
-		  "Getting spur idx %d is2Ghz. %d val %x\n",
-		  i, is2GHz, ah->config.spurchans[i][is2GHz]);
+	ath_dbg(common, ATH_DBG_ANI,
+		"Getting spur idx:%d is2Ghz:%d val:%x\n",
+		i, is2GHz, ah->config.spurchans[i][is2GHz]);
 
 	switch (ah->config.spurmode) {
 	case SPUR_DISABLE:
 		break;
 	case SPUR_ENABLE_IOCTL:
 		spur_val = ah->config.spurchans[i][is2GHz];
-		ath_print(common, ATH_DBG_ANI,
-			  "Getting spur val from new loc. %d\n", spur_val);
+		ath_dbg(common, ATH_DBG_ANI,
+			"Getting spur val from new loc. %d\n", spur_val);
 		break;
 	case SPUR_ENABLE_EEPROM:
 		spur_val = EEP_MAP9287_SPURCHAN;
@@ -1177,8 +1004,6 @@ const struct eeprom_ops eep_ar9287_ops = {
 	.fill_eeprom		= ath9k_hw_ar9287_fill_eeprom,
 	.get_eeprom_ver		= ath9k_hw_ar9287_get_eeprom_ver,
 	.get_eeprom_rev		= ath9k_hw_ar9287_get_eeprom_rev,
-	.get_num_ant_config	= ath9k_hw_ar9287_get_num_ant_config,
-	.get_eeprom_antenna_cfg	= ath9k_hw_ar9287_get_eeprom_antenna_cfg,
 	.set_board_values	= ath9k_hw_ar9287_set_board_values,
 	.set_addac		= ath9k_hw_ar9287_set_addac,
 	.set_txpower		= ath9k_hw_ar9287_set_txpower,
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
index 76b4d65472d..088f141f200 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -96,8 +96,8 @@ static bool ath9k_hw_def_fill_eeprom(struct ath_hw *ah)
 	for (addr = 0; addr < SIZE_EEPROM_DEF; addr++) {
 		if (!ath9k_hw_nvram_read(common, addr + ar5416_eep_start_loc,
 					 eep_data)) {
-			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-				  "Unable to read eeprom region\n");
+			ath_err(ath9k_hw_common(ah),
+				"Unable to read eeprom region\n");
 			return false;
 		}
 		eep_data++;
@@ -117,13 +117,13 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 	int i, addr, size;
 
 	if (!ath9k_hw_nvram_read(common, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
-		ath_print(common, ATH_DBG_FATAL, "Reading Magic # failed\n");
+		ath_err(common, "Reading Magic # failed\n");
 		return false;
 	}
 
 	if (!ath9k_hw_use_flash(ah)) {
-		ath_print(common, ATH_DBG_EEPROM,
-			  "Read Magic = 0x%04X\n", magic);
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"Read Magic = 0x%04X\n", magic);
 
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
@@ -139,16 +139,15 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 					eepdata++;
 				}
 			} else {
-				ath_print(common, ATH_DBG_FATAL,
-					  "Invalid EEPROM Magic. "
-					  "Endianness mismatch.\n");
+				ath_err(common,
+					"Invalid EEPROM Magic. Endianness mismatch.\n");
 				return -EINVAL;
 			}
 		}
 	}
 
-	ath_print(common, ATH_DBG_EEPROM, "need_swap = %s.\n",
-		  need_swap ? "True" : "False");
+	ath_dbg(common, ATH_DBG_EEPROM, "need_swap = %s.\n",
+		need_swap ? "True" : "False");
 
 	if (need_swap)
 		el = swab16(ah->eeprom.def.baseEepHeader.length);
@@ -169,8 +168,8 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 		u32 integer, j;
 		u16 word;
 
-		ath_print(common, ATH_DBG_EEPROM,
-			  "EEPROM Endianness is not native.. Changing.\n");
+		ath_dbg(common, ATH_DBG_EEPROM,
+			"EEPROM Endianness is not native.. Changing.\n");
 
 		word = swab16(eep->baseEepHeader.length);
 		eep->baseEepHeader.length = word;
@@ -207,7 +206,7 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 				pModal->antCtrlChain[i] = integer;
 			}
 
-			for (i = 0; i < AR5416_EEPROM_MODAL_SPURS; i++) {
+			for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
 				word = swab16(pModal->spurChans[i].spurChan);
 				pModal->spurChans[i].spurChan = word;
 			}
@@ -216,8 +215,7 @@ static int ath9k_hw_def_check_eeprom(struct ath_hw *ah)
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
 	    ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+		ath_err(common, "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
 			sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
 	}
@@ -376,8 +374,7 @@ static void ath9k_hw_def_set_board_values(struct ath_hw *ah,
 	pModal = &(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
 	txRxAttenLocal = IS_CHAN_2GHZ(chan) ? 23 : 44;
 
-	REG_WRITE(ah, AR_PHY_SWITCH_COM,
-		  ah->eep_ops->get_eeprom_antenna_cfg(ah, chan));
+	REG_WRITE(ah, AR_PHY_SWITCH_COM, pModal->antCtrlCommon & 0xffff);
 
 	for (i = 0; i < AR5416_MAX_CHAINS; i++) {
 		if (AR_SREV_9280(ah)) {
@@ -451,9 +448,10 @@ static void ath9k_hw_def_set_board_values(struct ath_hw *ah,
 		ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
 					  AR_AN_TOP2_LOCALBIAS,
 					  AR_AN_TOP2_LOCALBIAS_S,
-					  pModal->local_bias);
+					  !!(pModal->lna_ctl &
+					     LNA_CTL_LOCAL_BIAS));
 		REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
-			      pModal->force_xpaon);
+			      !!(pModal->lna_ctl & LNA_CTL_FORCE_XPA));
 	}
 
 	REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
@@ -589,168 +587,6 @@ static void ath9k_hw_def_set_addac(struct ath_hw *ah,
 #undef XPA_LVL_FREQ
 }
 
-static void ath9k_hw_get_def_gain_boundaries_pdadcs(struct ath_hw *ah,
-				struct ath9k_channel *chan,
-				struct cal_data_per_freq *pRawDataSet,
-				u8 *bChans, u16 availPiers,
-				u16 tPdGainOverlap,
-				u16 *pPdGainBoundaries, u8 *pPDADCValues,
-				u16 numXpdGains)
-{
-	int i, j, k;
-	int16_t ss;
-	u16 idxL = 0, idxR = 0, numPiers;
-	static u8 vpdTableL[AR5416_NUM_PD_GAINS]
-		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-	static u8 vpdTableR[AR5416_NUM_PD_GAINS]
-		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-	static u8 vpdTableI[AR5416_NUM_PD_GAINS]
-		[AR5416_MAX_PWR_RANGE_IN_HALF_DB];
-
-	u8 *pVpdL, *pVpdR, *pPwrL, *pPwrR;
-	u8 minPwrT4[AR5416_NUM_PD_GAINS];
-	u8 maxPwrT4[AR5416_NUM_PD_GAINS];
-	int16_t vpdStep;
-	int16_t tmpVal;
-	u16 sizeCurrVpdTable, maxIndex, tgtIndex;
-	bool match;
-	int16_t minDelta = 0;
-	struct chan_centers centers;
-
-	memset(&minPwrT4, 0, AR9287_NUM_PD_GAINS);
-	ath9k_hw_get_channel_centers(ah, chan, &centers);
-
-	for (numPiers = 0; numPiers < availPiers; numPiers++) {
-		if (bChans[numPiers] == AR5416_BCHAN_UNUSED)
-			break;
-	}
-
-	match = ath9k_hw_get_lower_upper_index((u8)FREQ2FBIN(centers.synth_center,
-							     IS_CHAN_2GHZ(chan)),
-					       bChans, numPiers, &idxL, &idxR);
-
-	if (match) {
-		for (i = 0; i < numXpdGains; i++) {
-			minPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][0];
-			maxPwrT4[i] = pRawDataSet[idxL].pwrPdg[i][4];
-			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
-					pRawDataSet[idxL].pwrPdg[i],
-					pRawDataSet[idxL].vpdPdg[i],
-					AR5416_PD_GAIN_ICEPTS,
-					vpdTableI[i]);
-		}
-	} else {
-		for (i = 0; i < numXpdGains; i++) {
-			pVpdL = pRawDataSet[idxL].vpdPdg[i];
-			pPwrL = pRawDataSet[idxL].pwrPdg[i];
-			pVpdR = pRawDataSet[idxR].vpdPdg[i];
-			pPwrR = pRawDataSet[idxR].pwrPdg[i];
-
-			minPwrT4[i] = max(pPwrL[0], pPwrR[0]);
-
-			maxPwrT4[i] =
-				min(pPwrL[AR5416_PD_GAIN_ICEPTS - 1],
-				    pPwrR[AR5416_PD_GAIN_ICEPTS - 1]);
-
-
-			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
-						pPwrL, pVpdL,
-						AR5416_PD_GAIN_ICEPTS,
-						vpdTableL[i]);
-			ath9k_hw_fill_vpd_table(minPwrT4[i], maxPwrT4[i],
-						pPwrR, pVpdR,
-						AR5416_PD_GAIN_ICEPTS,
-						vpdTableR[i]);
-
-			for (j = 0; j <= (maxPwrT4[i] - minPwrT4[i]) / 2; j++) {
-				vpdTableI[i][j] =
-					(u8)(ath9k_hw_interpolate((u16)
-					     FREQ2FBIN(centers.
-						       synth_center,
-						       IS_CHAN_2GHZ
-						       (chan)),
-					     bChans[idxL], bChans[idxR],
-					     vpdTableL[i][j], vpdTableR[i][j]));
-			}
-		}
-	}
-
-	k = 0;
-
-	for (i = 0; i < numXpdGains; i++) {
-		if (i == (numXpdGains - 1))
-			pPdGainBoundaries[i] =
-				(u16)(maxPwrT4[i] / 2);
-		else
-			pPdGainBoundaries[i] =
-				(u16)((maxPwrT4[i] + minPwrT4[i + 1]) / 4);
-
-		pPdGainBoundaries[i] =
-			min((u16)AR5416_MAX_RATE_POWER, pPdGainBoundaries[i]);
-
-		if ((i == 0) && !AR_SREV_5416_20_OR_LATER(ah)) {
-			minDelta = pPdGainBoundaries[0] - 23;
-			pPdGainBoundaries[0] = 23;
-		} else {
-			minDelta = 0;
-		}
-
-		if (i == 0) {
-			if (AR_SREV_9280_20_OR_LATER(ah))
-				ss = (int16_t)(0 - (minPwrT4[i] / 2));
-			else
-				ss = 0;
-		} else {
-			ss = (int16_t)((pPdGainBoundaries[i - 1] -
-					(minPwrT4[i] / 2)) -
-				       tPdGainOverlap + 1 + minDelta);
-		}
-		vpdStep = (int16_t)(vpdTableI[i][1] - vpdTableI[i][0]);
-		vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
-
-		while ((ss < 0) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
-			tmpVal = (int16_t)(vpdTableI[i][0] + ss * vpdStep);
-			pPDADCValues[k++] = (u8)((tmpVal < 0) ? 0 : tmpVal);
-			ss++;
-		}
-
-		sizeCurrVpdTable = (u8) ((maxPwrT4[i] - minPwrT4[i]) / 2 + 1);
-		tgtIndex = (u8)(pPdGainBoundaries[i] + tPdGainOverlap -
-				(minPwrT4[i] / 2));
-		maxIndex = (tgtIndex < sizeCurrVpdTable) ?
-			tgtIndex : sizeCurrVpdTable;
-
-		while ((ss < maxIndex) && (k < (AR5416_NUM_PDADC_VALUES - 1))) {
-			pPDADCValues[k++] = vpdTableI[i][ss++];
-		}
-
-		vpdStep = (int16_t)(vpdTableI[i][sizeCurrVpdTable - 1] -
-				    vpdTableI[i][sizeCurrVpdTable - 2]);
-		vpdStep = (int16_t)((vpdStep < 1) ? 1 : vpdStep);
-
-		if (tgtIndex >= maxIndex) {
-			while ((ss <= tgtIndex) &&
-			       (k < (AR5416_NUM_PDADC_VALUES - 1))) {
-				tmpVal = (int16_t)((vpdTableI[i][sizeCurrVpdTable - 1] +
-						    (ss - maxIndex + 1) * vpdStep));
-				pPDADCValues[k++] = (u8)((tmpVal > 255) ?
-							 255 : tmpVal);
-				ss++;
-			}
-		}
-	}
-
-	while (i < AR5416_PD_GAINS_IN_MASK) {
-		pPdGainBoundaries[i] = pPdGainBoundaries[i - 1];
-		i++;
-	}
-
-	while (k < AR5416_NUM_PDADC_VALUES) {
-		pPDADCValues[k] = pPDADCValues[k - 1];
-		k++;
-	}
-}
-
 static int16_t ath9k_change_gain_boundary_setting(struct ath_hw *ah,
 				u16 *gb,
 				u16 numXpdGain,
@@ -783,7 +619,7 @@ static int16_t ath9k_change_gain_boundary_setting(struct ath_hw *ah,
 		/* Because of a hardware limitation, ensure the gain boundary
 		 * is not larger than (63 - overlap)
 		 */
-		gb_limit = (u16)(AR5416_MAX_RATE_POWER - pdGainOverlap_t2);
+		gb_limit = (u16)(MAX_RATE_POWER - pdGainOverlap_t2);
 
 		for (k = 0; k < numXpdGain; k++)
 			gb[k] = (u16)min(gb_limit, gb[k]);
@@ -917,7 +753,7 @@ static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
 				ath9k_olc_get_pdadcs(ah, pcdacIdx,
 						     txPower/2, pdadcValues);
 			} else {
-				ath9k_hw_get_def_gain_boundaries_pdadcs(ah,
+				ath9k_hw_get_gain_boundaries_pdadcs(ah,
 							chan, pRawDataset,
 							pCalBChans, numPiers,
 							pdGainOverlap_t2,
@@ -965,20 +801,19 @@ static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
 					((pdadcValues[4 * j + 3] & 0xFF) << 24);
 				REG_WRITE(ah, regOffset, reg32);
 
-				ath_print(common, ATH_DBG_EEPROM,
-					  "PDADC (%d,%4x): %4.4x %8.8x\n",
-					  i, regChainOffset, regOffset,
-					  reg32);
-				ath_print(common, ATH_DBG_EEPROM,
-					  "PDADC: Chain %d | PDADC %3d "
-					  "Value %3d | PDADC %3d Value %3d | "
-					  "PDADC %3d Value %3d | PDADC %3d "
-					  "Value %3d |\n",
-					  i, 4 * j, pdadcValues[4 * j],
-					  4 * j + 1, pdadcValues[4 * j + 1],
-					  4 * j + 2, pdadcValues[4 * j + 2],
-					  4 * j + 3,
-					  pdadcValues[4 * j + 3]);
+				ath_dbg(common, ATH_DBG_EEPROM,
+					"PDADC (%d,%4x): %4.4x %8.8x\n",
+					i, regChainOffset, regOffset,
+					reg32);
+				ath_dbg(common, ATH_DBG_EEPROM,
+					"PDADC: Chain %d | PDADC %3d "
+					"Value %3d | PDADC %3d Value %3d | "
+					"PDADC %3d Value %3d | PDADC %3d "
+					"Value %3d |\n",
+					i, 4 * j, pdadcValues[4 * j],
+					4 * j + 1, pdadcValues[4 * j + 1],
+					4 * j + 2, pdadcValues[4 * j + 2],
+					4 * j + 3, pdadcValues[4 * j + 3]);
 
 				regOffset += 4;
 			}
@@ -1003,9 +838,9 @@ static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
-	u16 twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+	u16 twiceMaxEdgePower = MAX_RATE_POWER;
 	static const u16 tpScaleReductionTable[5] =
-		{ 0, 3, 6, 9, AR5416_MAX_RATE_POWER };
+		{ 0, 3, 6, 9, MAX_RATE_POWER };
 
 	int i;
 	int16_t twiceLargestAntenna;
@@ -1021,13 +856,16 @@ static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 		0, {0, 0, 0, 0}
 	};
 	u16 scaledPower = 0, minCtlPower, maxRegAllowedPower;
-	u16 ctlModesFor11a[] =
-		{ CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 };
-	u16 ctlModesFor11g[] =
-		{ CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, CTL_11G_EXT,
-		  CTL_2GHT40
-		};
-	u16 numCtlModes, *pCtlMode, ctlMode, freq;
+	static const u16 ctlModesFor11a[] = {
+		CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40
+	};
+	static const u16 ctlModesFor11g[] = {
+		CTL_11B, CTL_11G, CTL_2GHT20,
+		CTL_11B_EXT, CTL_11G_EXT, CTL_2GHT40
+	};
+	u16 numCtlModes;
+	const u16 *pCtlMode;
+	u16 ctlMode, freq;
 	struct chan_centers centers;
 	int tx_chainmask;
 	u16 twiceMinEdgePower;
@@ -1062,15 +900,19 @@ static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 	case 1:
 		break;
 	case 2:
-		scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	case 3:
-		scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+			scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+		else
+			scaledPower = 0;
 		break;
 	}
 
-	scaledPower = max((u16)0, scaledPower);
-
 	if (IS_CHAN_2GHZ(chan)) {
 		numCtlModes = ARRAY_SIZE(ctlModesFor11g) -
 			SUB_NUM_CTL_MODES_AT_2G_40;
@@ -1143,7 +985,7 @@ static void ath9k_hw_set_def_power_per_rate_table(struct ath_hw *ah,
 
 		if (ah->eep_ops->get_eeprom_ver(ah) == 14 &&
 		    ah->eep_ops->get_eeprom_rev(ah) <= 2)
-			twiceMaxEdgePower = AR5416_MAX_RATE_POWER;
+			twiceMaxEdgePower = MAX_RATE_POWER;
 
 		for (i = 0; (i < AR5416_NUM_CTLS) && pEepData->ctlIndex[i]; i++) {
 			if ((((cfgCtl & ~CTL_MODE_M) |
@@ -1258,7 +1100,7 @@ static void ath9k_hw_def_set_txpower(struct ath_hw *ah,
 				    u16 cfgCtl,
 				    u8 twiceAntennaReduction,
 				    u8 twiceMaxRegulatoryPower,
-				    u8 powerLimit)
+				    u8 powerLimit, bool test)
 {
 #define RT_AR_DELTA(x) (ratesArray[x] - cck_ofdm_delta)
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
@@ -1285,12 +1127,44 @@ static void ath9k_hw_def_set_txpower(struct ath_hw *ah,
 
 	ath9k_hw_set_def_power_cal_table(ah, chan, &txPowerIndexOffset);
 
+	regulatory->max_power_level = 0;
 	for (i = 0; i < ARRAY_SIZE(ratesArray); i++) {
 		ratesArray[i] =	(int16_t)(txPowerIndexOffset + ratesArray[i]);
-		if (ratesArray[i] > AR5416_MAX_RATE_POWER)
-			ratesArray[i] = AR5416_MAX_RATE_POWER;
+		if (ratesArray[i] > MAX_RATE_POWER)
+			ratesArray[i] = MAX_RATE_POWER;
+		if (ratesArray[i] > regulatory->max_power_level)
+			regulatory->max_power_level = ratesArray[i];
 	}
 
+	if (!test) {
+		i = rate6mb;
+
+		if (IS_CHAN_HT40(chan))
+			i = rateHt40_0;
+		else if (IS_CHAN_HT20(chan))
+			i = rateHt20_0;
+
+		regulatory->max_power_level = ratesArray[i];
+	}
+
+	switch(ar5416_get_ntxchains(ah->txchainmask)) {
+	case 1:
+		break;
+	case 2:
+		regulatory->max_power_level += INCREASE_MAXPOW_BY_TWO_CHAIN;
+		break;
+	case 3:
+		regulatory->max_power_level += INCREASE_MAXPOW_BY_THREE_CHAIN;
+		break;
+	default:
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_EEPROM,
+			"Invalid chainmask configuration\n");
+		break;
+	}
+
+	if (test)
+		return;
+
 	if (AR_SREV_9280_20_OR_LATER(ah)) {
 		for (i = 0; i < Ar5416RateSize; i++) {
 			int8_t pwr_table_offset;
@@ -1387,62 +1261,6 @@ static void ath9k_hw_def_set_txpower(struct ath_hw *ah,
 	REG_WRITE(ah, AR_PHY_POWER_TX_SUB,
 		  ATH9K_POW_SM(pModal->pwrDecreaseFor3Chain, 6)
 		  | ATH9K_POW_SM(pModal->pwrDecreaseFor2Chain, 0));
-
-	i = rate6mb;
-
-	if (IS_CHAN_HT40(chan))
-		i = rateHt40_0;
-	else if (IS_CHAN_HT20(chan))
-		i = rateHt20_0;
-
-	if (AR_SREV_9280_20_OR_LATER(ah))
-		regulatory->max_power_level =
-			ratesArray[i] + AR5416_PWR_TABLE_OFFSET_DB * 2;
-	else
-		regulatory->max_power_level = ratesArray[i];
-
-	switch(ar5416_get_ntxchains(ah->txchainmask)) {
-	case 1:
-		break;
-	case 2:
-		regulatory->max_power_level += INCREASE_MAXPOW_BY_TWO_CHAIN;
-		break;
-	case 3:
-		regulatory->max_power_level += INCREASE_MAXPOW_BY_THREE_CHAIN;
-		break;
-	default:
-		ath_print(ath9k_hw_common(ah), ATH_DBG_EEPROM,
-			  "Invalid chainmask configuration\n");
-		break;
-	}
-}
-
-static u8 ath9k_hw_def_get_num_ant_config(struct ath_hw *ah,
-					  enum ath9k_hal_freq_band freq_band)
-{
-	struct ar5416_eeprom_def *eep = &ah->eeprom.def;
-	struct modal_eep_header *pModal =
-		&(eep->modalHeader[freq_band]);
-	struct base_eep_header *pBase = &eep->baseEepHeader;
-	u8 num_ant_config;
-
-	num_ant_config = 1;
-
-	if (pBase->version >= 0x0E0D)
-		if (pModal->useAnt1)
-			num_ant_config += 1;
-
-	return num_ant_config;
-}
-
-static u32 ath9k_hw_def_get_eeprom_antenna_cfg(struct ath_hw *ah,
-					       struct ath9k_channel *chan)
-{
-	struct ar5416_eeprom_def *eep = &ah->eeprom.def;
-	struct modal_eep_header *pModal =
-		&(eep->modalHeader[IS_CHAN_2GHZ(chan)]);
-
-	return pModal->antCtrlCommon;
 }
 
 static u16 ath9k_hw_def_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
@@ -1453,17 +1271,17 @@ static u16 ath9k_hw_def_get_spur_channel(struct ath_hw *ah, u16 i, bool is2GHz)
 
 	u16 spur_val = AR_NO_SPUR;
 
-	ath_print(common, ATH_DBG_ANI,
-		  "Getting spur idx %d is2Ghz. %d val %x\n",
-		  i, is2GHz, ah->config.spurchans[i][is2GHz]);
+	ath_dbg(common, ATH_DBG_ANI,
+		"Getting spur idx:%d is2Ghz:%d val:%x\n",
+		i, is2GHz, ah->config.spurchans[i][is2GHz]);
 
 	switch (ah->config.spurmode) {
 	case SPUR_DISABLE:
 		break;
 	case SPUR_ENABLE_IOCTL:
 		spur_val = ah->config.spurchans[i][is2GHz];
-		ath_print(common, ATH_DBG_ANI,
-			  "Getting spur val from new loc. %d\n", spur_val);
+		ath_dbg(common, ATH_DBG_ANI,
+			"Getting spur val from new loc. %d\n", spur_val);
 		break;
 	case SPUR_ENABLE_EEPROM:
 		spur_val = EEP_DEF_SPURCHAN;
@@ -1481,8 +1299,6 @@ const struct eeprom_ops eep_def_ops = {
 	.fill_eeprom		= ath9k_hw_def_fill_eeprom,
 	.get_eeprom_ver		= ath9k_hw_def_get_eeprom_ver,
 	.get_eeprom_rev		= ath9k_hw_def_get_eeprom_rev,
-	.get_num_ant_config	= ath9k_hw_def_get_num_ant_config,
-	.get_eeprom_antenna_cfg	= ath9k_hw_def_get_eeprom_antenna_cfg,
 	.set_board_values	= ath9k_hw_def_set_board_values,
 	.set_addac		= ath9k_hw_def_set_addac,
 	.set_txpower		= ath9k_hw_def_set_txpower,
diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c
index 4a9a68bba32..13376406924 100644
--- a/drivers/net/wireless/ath/ath9k/gpio.c
+++ b/drivers/net/wireless/ath/ath9k/gpio.c
@@ -103,8 +103,8 @@ static int ath_register_led(struct ath_softc *sc, struct ath_led *led,
 
 	ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev);
 	if (ret)
-		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
-			  "Failed to register led:%s", led->name);
+		ath_err(ath9k_hw_common(sc->sc_ah),
+			"Failed to register led:%s", led->name);
 	else
 		led->registered = 1;
 	return ret;
@@ -236,13 +236,13 @@ static void ath_detect_bt_priority(struct ath_softc *sc)
 		sc->sc_flags &= ~(SC_OP_BT_PRIORITY_DETECTED | SC_OP_BT_SCAN);
 		/* Detect if colocated bt started scanning */
 		if (btcoex->bt_priority_cnt >= ATH_BT_CNT_SCAN_THRESHOLD) {
-			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_BTCOEX,
-				  "BT scan detected");
+			ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_BTCOEX,
+				"BT scan detected\n");
 			sc->sc_flags |= (SC_OP_BT_SCAN |
 					 SC_OP_BT_PRIORITY_DETECTED);
 		} else if (btcoex->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
-			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_BTCOEX,
-				  "BT priority traffic detected");
+			ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_BTCOEX,
+				"BT priority traffic detected\n");
 			sc->sc_flags |= SC_OP_BT_PRIORITY_DETECTED;
 		}
 
@@ -259,7 +259,7 @@ static void ath9k_gen_timer_start(struct ath_hw *ah,
 	ath9k_hw_gen_timer_start(ah, timer, timer_next, timer_period);
 
 	if ((ah->imask & ATH9K_INT_GENTIMER) == 0) {
-		ath9k_hw_set_interrupts(ah, 0);
+		ath9k_hw_disable_interrupts(ah);
 		ah->imask |= ATH9K_INT_GENTIMER;
 		ath9k_hw_set_interrupts(ah, ah->imask);
 	}
@@ -273,7 +273,7 @@ static void ath9k_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
 
 	/* if no timer is enabled, turn off interrupt mask */
 	if (timer_table->timer_mask.val == 0) {
-		ath9k_hw_set_interrupts(ah, 0);
+		ath9k_hw_disable_interrupts(ah);
 		ah->imask &= ~ATH9K_INT_GENTIMER;
 		ath9k_hw_set_interrupts(ah, ah->imask);
 	}
@@ -310,10 +310,8 @@ static void ath_btcoex_period_timer(unsigned long data)
 
 		timer_period = is_btscan ? btcoex->btscan_no_stomp :
 					   btcoex->btcoex_no_stomp;
-		ath9k_gen_timer_start(ah,
-				      btcoex->no_stomp_timer,
-				      (ath9k_hw_gettsf32(ah) +
-				       timer_period), timer_period * 10);
+		ath9k_gen_timer_start(ah, btcoex->no_stomp_timer, 0,
+				      timer_period * 10);
 		btcoex->hw_timer_enabled = true;
 	}
 
@@ -333,8 +331,8 @@ static void ath_btcoex_no_stomp_timer(void *arg)
 	struct ath_common *common = ath9k_hw_common(ah);
 	bool is_btscan = sc->sc_flags & SC_OP_BT_SCAN;
 
-	ath_print(common, ATH_DBG_BTCOEX,
-		  "no stomp timer running\n");
+	ath_dbg(common, ATH_DBG_BTCOEX,
+		"no stomp timer running\n");
 
 	spin_lock_bh(&btcoex->btcoex_lock);
 
@@ -380,8 +378,8 @@ void ath9k_btcoex_timer_resume(struct ath_softc *sc)
 	struct ath_btcoex *btcoex = &sc->btcoex;
 	struct ath_hw *ah = sc->sc_ah;
 
-	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
-		  "Starting btcoex timers");
+	ath_dbg(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+		"Starting btcoex timers\n");
 
 	/* make sure duty cycle timer is also stopped when resuming */
 	if (btcoex->hw_timer_enabled)
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c
index 6576f683dba..5ab3084eb9c 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.c
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.c
@@ -28,15 +28,30 @@ MODULE_FIRMWARE(FIRMWARE_AR9271);
 static struct usb_device_id ath9k_hif_usb_ids[] = {
 	{ USB_DEVICE(0x0cf3, 0x9271) }, /* Atheros */
 	{ USB_DEVICE(0x0cf3, 0x1006) }, /* Atheros */
-	{ USB_DEVICE(0x0cf3, 0x7010) }, /* Atheros */
-	{ USB_DEVICE(0x0cf3, 0x7015) }, /* Atheros */
 	{ USB_DEVICE(0x0846, 0x9030) }, /* Netgear N150 */
-	{ USB_DEVICE(0x0846, 0x9018) }, /* Netgear WNDA3200 */
 	{ USB_DEVICE(0x07D1, 0x3A10) }, /* Dlink Wireless 150 */
 	{ USB_DEVICE(0x13D3, 0x3327) }, /* Azurewave */
 	{ USB_DEVICE(0x13D3, 0x3328) }, /* Azurewave */
+	{ USB_DEVICE(0x13D3, 0x3346) }, /* IMC Networks */
+	{ USB_DEVICE(0x13D3, 0x3348) }, /* Azurewave */
+	{ USB_DEVICE(0x13D3, 0x3349) }, /* Azurewave */
+	{ USB_DEVICE(0x13D3, 0x3350) }, /* Azurewave */
 	{ USB_DEVICE(0x04CA, 0x4605) }, /* Liteon */
-	{ USB_DEVICE(0x083A, 0xA704) }, /* SMC Networks */
+	{ USB_DEVICE(0x040D, 0x3801) }, /* VIA */
+	{ USB_DEVICE(0x0cf3, 0xb003) }, /* Ubiquiti WifiStation Ext */
+
+	{ USB_DEVICE(0x0cf3, 0x7015),
+	  .driver_info = AR9287_USB },  /* Atheros */
+	{ USB_DEVICE(0x1668, 0x1200),
+	  .driver_info = AR9287_USB },  /* Verizon */
+
+	{ USB_DEVICE(0x0cf3, 0x7010),
+	  .driver_info = AR9280_USB },  /* Atheros */
+	{ USB_DEVICE(0x0846, 0x9018),
+	  .driver_info = AR9280_USB },  /* Netgear WNDA3200 */
+	{ USB_DEVICE(0x083A, 0xA704),
+	  .driver_info = AR9280_USB },  /* SMC Networks */
+
 	{ },
 };
 
@@ -138,16 +153,36 @@ static void hif_usb_tx_cb(struct urb *urb)
 	case -ENODEV:
 	case -ESHUTDOWN:
 		/*
-		 * The URB has been killed, free the SKBs
-		 * and return.
+		 * The URB has been killed, free the SKBs.
 		 */
 		ath9k_skb_queue_purge(hif_dev, &tx_buf->skb_queue);
-		return;
+
+		/*
+		 * If the URBs are being flushed, no need to add this
+		 * URB to the free list.
+		 */
+		spin_lock(&hif_dev->tx.tx_lock);
+		if (hif_dev->tx.flags & HIF_USB_TX_FLUSH) {
+			spin_unlock(&hif_dev->tx.tx_lock);
+			return;
+		}
+		spin_unlock(&hif_dev->tx.tx_lock);
+
+		/*
+		 * In the stop() case, this URB has to be added to
+		 * the free list.
+		 */
+		goto add_free;
 	default:
 		break;
 	}
 
-	/* Check if TX has been stopped */
+	/*
+	 * Check if TX has been stopped, this is needed because
+	 * this CB could have been invoked just after the TX lock
+	 * was released in hif_stop() and kill_urb() hasn't been
+	 * called yet.
+	 */
 	spin_lock(&hif_dev->tx.tx_lock);
 	if (hif_dev->tx.flags & HIF_USB_TX_STOP) {
 		spin_unlock(&hif_dev->tx.tx_lock);
@@ -299,6 +334,7 @@ static void hif_usb_start(void *hif_handle, u8 pipe_id)
 static void hif_usb_stop(void *hif_handle, u8 pipe_id)
 {
 	struct hif_device_usb *hif_dev = (struct hif_device_usb *)hif_handle;
+	struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL;
 	unsigned long flags;
 
 	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
@@ -306,6 +342,12 @@ static void hif_usb_stop(void *hif_handle, u8 pipe_id)
 	hif_dev->tx.tx_skb_cnt = 0;
 	hif_dev->tx.flags |= HIF_USB_TX_STOP;
 	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
+
+	/* The pending URBs have to be canceled. */
+	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
+				 &hif_dev->tx.tx_pending, list) {
+		usb_kill_urb(tx_buf->urb);
+	}
 }
 
 static int hif_usb_send(void *hif_handle, u8 pipe_id, struct sk_buff *skb,
@@ -347,9 +389,9 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 				    struct sk_buff *skb)
 {
 	struct sk_buff *nskb, *skb_pool[MAX_PKT_NUM_IN_TRANSFER];
-	int index = 0, i = 0, chk_idx, len = skb->len;
-	int rx_remain_len = 0, rx_pkt_len = 0;
-	u16 pkt_len, pkt_tag, pool_index = 0;
+	int index = 0, i = 0, len = skb->len;
+	int rx_remain_len, rx_pkt_len;
+	u16 pool_index = 0;
 	u8 *ptr;
 
 	spin_lock(&hif_dev->rx_lock);
@@ -383,64 +425,64 @@ static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev,
 	spin_unlock(&hif_dev->rx_lock);
 
 	while (index < len) {
+		u16 pkt_len;
+		u16 pkt_tag;
+		u16 pad_len;
+		int chk_idx;
+
 		ptr = (u8 *) skb->data;
 
 		pkt_len = ptr[index] + (ptr[index+1] << 8);
 		pkt_tag = ptr[index+2] + (ptr[index+3] << 8);
 
-		if (pkt_tag == ATH_USB_RX_STREAM_MODE_TAG) {
-			u16 pad_len;
-
-			pad_len = 4 - (pkt_len & 0x3);
-			if (pad_len == 4)
-				pad_len = 0;
-
-			chk_idx = index;
-			index = index + 4 + pkt_len + pad_len;
-
-			if (index > MAX_RX_BUF_SIZE) {
-				spin_lock(&hif_dev->rx_lock);
-				hif_dev->rx_remain_len = index - MAX_RX_BUF_SIZE;
-				hif_dev->rx_transfer_len =
-					MAX_RX_BUF_SIZE - chk_idx - 4;
-				hif_dev->rx_pad_len = pad_len;
-
-				nskb = __dev_alloc_skb(pkt_len + 32,
-						       GFP_ATOMIC);
-				if (!nskb) {
-					dev_err(&hif_dev->udev->dev,
-					"ath9k_htc: RX memory allocation"
-					" error\n");
-					spin_unlock(&hif_dev->rx_lock);
-					goto err;
-				}
-				skb_reserve(nskb, 32);
-				RX_STAT_INC(skb_allocated);
-
-				memcpy(nskb->data, &(skb->data[chk_idx+4]),
-				       hif_dev->rx_transfer_len);
-
-				/* Record the buffer pointer */
-				hif_dev->remain_skb = nskb;
+		if (pkt_tag != ATH_USB_RX_STREAM_MODE_TAG) {
+			RX_STAT_INC(skb_dropped);
+			return;
+		}
+
+		pad_len = 4 - (pkt_len & 0x3);
+		if (pad_len == 4)
+			pad_len = 0;
+
+		chk_idx = index;
+		index = index + 4 + pkt_len + pad_len;
+
+		if (index > MAX_RX_BUF_SIZE) {
+			spin_lock(&hif_dev->rx_lock);
+			hif_dev->rx_remain_len = index - MAX_RX_BUF_SIZE;
+			hif_dev->rx_transfer_len =
+				MAX_RX_BUF_SIZE - chk_idx - 4;
+			hif_dev->rx_pad_len = pad_len;
+
+			nskb = __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC);
+			if (!nskb) {
+				dev_err(&hif_dev->udev->dev,
+					"ath9k_htc: RX memory allocation error\n");
 				spin_unlock(&hif_dev->rx_lock);
-			} else {
-				nskb = __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC);
-				if (!nskb) {
-					dev_err(&hif_dev->udev->dev,
-					"ath9k_htc: RX memory allocation"
-					" error\n");
-					goto err;
-				}
-				skb_reserve(nskb, 32);
-				RX_STAT_INC(skb_allocated);
-
-				memcpy(nskb->data, &(skb->data[chk_idx+4]), pkt_len);
-				skb_put(nskb, pkt_len);
-				skb_pool[pool_index++] = nskb;
+				goto err;
 			}
+			skb_reserve(nskb, 32);
+			RX_STAT_INC(skb_allocated);
+
+			memcpy(nskb->data, &(skb->data[chk_idx+4]),
+			       hif_dev->rx_transfer_len);
+
+			/* Record the buffer pointer */
+			hif_dev->remain_skb = nskb;
+			spin_unlock(&hif_dev->rx_lock);
 		} else {
-			RX_STAT_INC(skb_dropped);
-			return;
+			nskb = __dev_alloc_skb(pkt_len + 32, GFP_ATOMIC);
+			if (!nskb) {
+				dev_err(&hif_dev->udev->dev,
+					"ath9k_htc: RX memory allocation error\n");
+				goto err;
+			}
+			skb_reserve(nskb, 32);
+			RX_STAT_INC(skb_allocated);
+
+			memcpy(nskb->data, &(skb->data[chk_idx+4]), pkt_len);
+			skb_put(nskb, pkt_len);
+			skb_pool[pool_index++] = nskb;
 		}
 	}
 
@@ -455,7 +497,7 @@ err:
 static void ath9k_hif_usb_rx_cb(struct urb *urb)
 {
 	struct sk_buff *skb = (struct sk_buff *) urb->context;
-	struct hif_device_usb *hif_dev = (struct hif_device_usb *)
+	struct hif_device_usb *hif_dev =
 		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 	int ret;
 
@@ -502,7 +544,7 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 {
 	struct sk_buff *skb = (struct sk_buff *) urb->context;
 	struct sk_buff *nskb;
-	struct hif_device_usb *hif_dev = (struct hif_device_usb *)
+	struct hif_device_usb *hif_dev =
 		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 	int ret;
 
@@ -540,11 +582,11 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb)
 			return;
 		}
 
-		usb_fill_int_urb(urb, hif_dev->udev,
+		usb_fill_bulk_urb(urb, hif_dev->udev,
 				 usb_rcvbulkpipe(hif_dev->udev,
 						 USB_REG_IN_PIPE),
 				 nskb->data, MAX_REG_IN_BUF_SIZE,
-				 ath9k_hif_usb_reg_in_cb, nskb, 1);
+				 ath9k_hif_usb_reg_in_cb, nskb);
 
 		ret = usb_submit_urb(urb, GFP_ATOMIC);
 		if (ret) {
@@ -572,6 +614,7 @@ free:
 static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
 {
 	struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL;
+	unsigned long flags;
 
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_buf, list) {
@@ -582,6 +625,10 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev)
 		kfree(tx_buf);
 	}
 
+	spin_lock_irqsave(&hif_dev->tx.tx_lock, flags);
+	hif_dev->tx.flags |= HIF_USB_TX_FLUSH;
+	spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);
+
 	list_for_each_entry_safe(tx_buf, tx_buf_tmp,
 				 &hif_dev->tx.tx_pending, list) {
 		usb_kill_urb(tx_buf->urb);
@@ -720,11 +767,11 @@ static int ath9k_hif_usb_alloc_reg_in_urb(struct hif_device_usb *hif_dev)
 	if (!skb)
 		goto err;
 
-	usb_fill_int_urb(hif_dev->reg_in_urb, hif_dev->udev,
+	usb_fill_bulk_urb(hif_dev->reg_in_urb, hif_dev->udev,
 			 usb_rcvbulkpipe(hif_dev->udev,
 					 USB_REG_IN_PIPE),
 			 skb->data, MAX_REG_IN_BUF_SIZE,
-			 ath9k_hif_usb_reg_in_cb, skb, 1);
+			 ath9k_hif_usb_reg_in_cb, skb);
 
 	if (usb_submit_urb(hif_dev->reg_in_urb, GFP_KERNEL) != 0)
 		goto err;
@@ -770,7 +817,8 @@ static void ath9k_hif_usb_dealloc_urbs(struct hif_device_usb *hif_dev)
 	ath9k_hif_usb_dealloc_rx_urbs(hif_dev);
 }
 
-static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
+static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev,
+				     u32 drv_info)
 {
 	int transfer, err;
 	const void *data = hif_dev->firmware->data;
@@ -801,16 +849,10 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
 	}
 	kfree(buf);
 
-	switch (hif_dev->device_id) {
-	case 0x7010:
-	case 0x7015:
-	case 0x9018:
+	if (IS_AR7010_DEVICE(drv_info))
 		firm_offset = AR7010_FIRMWARE_TEXT;
-		break;
-	default:
+	else
 		firm_offset = AR9271_FIRMWARE_TEXT;
-		break;
-	}
 
 	/*
 	 * Issue FW download complete command to firmware.
@@ -828,7 +870,7 @@ static int ath9k_hif_usb_download_fw(struct hif_device_usb *hif_dev)
 	return 0;
 }
 
-static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev)
+static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev, u32 drv_info)
 {
 	int ret, idx;
 	struct usb_host_interface *alt = &hif_dev->interface->altsetting[0];
@@ -843,16 +885,8 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev)
 		goto err_fw_req;
 	}
 
-	/* Alloc URBs */
-	ret = ath9k_hif_usb_alloc_urbs(hif_dev);
-	if (ret) {
-		dev_err(&hif_dev->udev->dev,
-			"ath9k_htc: Unable to allocate URBs\n");
-		goto err_urb;
-	}
-
 	/* Download firmware */
-	ret = ath9k_hif_usb_download_fw(hif_dev);
+	ret = ath9k_hif_usb_download_fw(hif_dev, drv_info);
 	if (ret) {
 		dev_err(&hif_dev->udev->dev,
 			"ath9k_htc: Firmware - %s download failed\n",
@@ -866,21 +900,27 @@ static int ath9k_hif_usb_dev_init(struct hif_device_usb *hif_dev)
 	 */
 	for (idx = 0; idx < alt->desc.bNumEndpoints; idx++) {
 		endp = &alt->endpoint[idx].desc;
-		if (((endp->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
-				== 0x04) &&
-		    ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-				== USB_ENDPOINT_XFER_INT)) {
+		if ((endp->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				== USB_ENDPOINT_XFER_INT) {
 			endp->bmAttributes &= ~USB_ENDPOINT_XFERTYPE_MASK;
 			endp->bmAttributes |= USB_ENDPOINT_XFER_BULK;
 			endp->bInterval = 0;
 		}
 	}
 
+	/* Alloc URBs */
+	ret = ath9k_hif_usb_alloc_urbs(hif_dev);
+	if (ret) {
+		dev_err(&hif_dev->udev->dev,
+			"ath9k_htc: Unable to allocate URBs\n");
+		goto err_urb;
+	}
+
 	return 0;
 
-err_fw_download:
-	ath9k_hif_usb_dealloc_urbs(hif_dev);
 err_urb:
+	ath9k_hif_usb_dealloc_urbs(hif_dev);
+err_fw_download:
 	release_firmware(hif_dev->firmware);
 err_fw_req:
 	hif_dev->firmware = NULL;
@@ -925,21 +965,15 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface,
 
 	/* Find out which firmware to load */
 
-	switch(hif_dev->device_id) {
-	case 0x7010:
-	case 0x7015:
-	case 0x9018:
+	if (IS_AR7010_DEVICE(id->driver_info))
 		if (le16_to_cpu(udev->descriptor.bcdDevice) == 0x0202)
 			hif_dev->fw_name = FIRMWARE_AR7010_1_1;
 		else
 			hif_dev->fw_name = FIRMWARE_AR7010;
-		break;
-	default:
+	else
 		hif_dev->fw_name = FIRMWARE_AR9271;
-		break;
-	}
 
-	ret = ath9k_hif_usb_dev_init(hif_dev);
+	ret = ath9k_hif_usb_dev_init(hif_dev, id->driver_info);
 	if (ret) {
 		ret = -EINVAL;
 		goto err_hif_init_usb;
@@ -947,7 +981,7 @@ static int ath9k_hif_usb_probe(struct usb_interface *interface,
 
 	ret = ath9k_htc_hw_init(hif_dev->htc_handle,
 				&hif_dev->udev->dev, hif_dev->device_id,
-				hif_dev->udev->product);
+				hif_dev->udev->product, id->driver_info);
 	if (ret) {
 		ret = -EINVAL;
 		goto err_htc_hw_init;
@@ -990,18 +1024,17 @@ static void ath9k_hif_usb_reboot(struct usb_device *udev)
 static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
 {
 	struct usb_device *udev = interface_to_usbdev(interface);
-	struct hif_device_usb *hif_dev =
-		(struct hif_device_usb *) usb_get_intfdata(interface);
+	struct hif_device_usb *hif_dev = usb_get_intfdata(interface);
+	bool unplugged = (udev->state == USB_STATE_NOTATTACHED) ? true : false;
 
 	if (hif_dev) {
-		ath9k_htc_hw_deinit(hif_dev->htc_handle,
-		    (udev->state == USB_STATE_NOTATTACHED) ? true : false);
+		ath9k_htc_hw_deinit(hif_dev->htc_handle, unplugged);
 		ath9k_htc_hw_free(hif_dev->htc_handle);
 		ath9k_hif_usb_dev_deinit(hif_dev);
 		usb_set_intfdata(interface, NULL);
 	}
 
-	if (hif_dev->flags & HIF_USB_START)
+	if (!unplugged && (hif_dev->flags & HIF_USB_START))
 		ath9k_hif_usb_reboot(udev);
 
 	kfree(hif_dev);
@@ -1013,8 +1046,14 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface)
 static int ath9k_hif_usb_suspend(struct usb_interface *interface,
 				 pm_message_t message)
 {
-	struct hif_device_usb *hif_dev =
-		(struct hif_device_usb *) usb_get_intfdata(interface);
+	struct hif_device_usb *hif_dev = usb_get_intfdata(interface);
+
+	/*
+	 * The device has to be set to FULLSLEEP mode in case no
+	 * interface is up.
+	 */
+	if (!(hif_dev->flags & HIF_USB_START))
+		ath9k_htc_suspend(hif_dev->htc_handle);
 
 	ath9k_hif_usb_dealloc_urbs(hif_dev);
 
@@ -1023,8 +1062,8 @@ static int ath9k_hif_usb_suspend(struct usb_interface *interface,
 
 static int ath9k_hif_usb_resume(struct usb_interface *interface)
 {
-	struct hif_device_usb *hif_dev =
-		(struct hif_device_usb *) usb_get_intfdata(interface);
+	struct hif_device_usb *hif_dev = usb_get_intfdata(interface);
+	struct htc_target *htc_handle = hif_dev->htc_handle;
 	int ret;
 
 	ret = ath9k_hif_usb_alloc_urbs(hif_dev);
@@ -1032,7 +1071,8 @@ static int ath9k_hif_usb_resume(struct usb_interface *interface)
 		return ret;
 
 	if (hif_dev->firmware) {
-		ret = ath9k_hif_usb_download_fw(hif_dev);
+		ret = ath9k_hif_usb_download_fw(hif_dev,
+				htc_handle->drv_priv->ah->hw_version.usbdev);
 		if (ret)
 			goto fail_resume;
 	} else {
@@ -1042,7 +1082,7 @@ static int ath9k_hif_usb_resume(struct usb_interface *interface)
 
 	mdelay(100);
 
-	ret = ath9k_htc_resume(hif_dev->htc_handle);
+	ret = ath9k_htc_resume(htc_handle);
 
 	if (ret)
 		goto fail_resume;
diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h
index 2daf97b11c0..7b9d863d403 100644
--- a/drivers/net/wireless/ath/ath9k/hif_usb.h
+++ b/drivers/net/wireless/ath/ath9k/hif_usb.h
@@ -17,6 +17,8 @@
 #ifndef HTC_USB_H
 #define HTC_USB_H
 
+#define IS_AR7010_DEVICE(_v) (((_v) == AR9280_USB) || ((_v) == AR9287_USB))
+
 #define AR9271_FIRMWARE       0x501000
 #define AR9271_FIRMWARE_TEXT  0x903000
 #define AR7010_FIRMWARE_TEXT  0x906000
@@ -62,6 +64,7 @@ struct tx_buf {
 };
 
 #define HIF_USB_TX_STOP  BIT(0)
+#define HIF_USB_TX_FLUSH BIT(1)
 
 struct hif_usb_tx {
 	u8 flags;
diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h
index 75ecf6a30d2..a099b3e87ed 100644
--- a/drivers/net/wireless/ath/ath9k/htc.h
+++ b/drivers/net/wireless/ath/ath9k/htc.h
@@ -331,17 +331,15 @@ void ath_htc_cancel_btcoex_work(struct ath9k_htc_priv *priv);
 
 #define OP_INVALID		   BIT(0)
 #define OP_SCANNING		   BIT(1)
-#define OP_FULL_RESET		   BIT(2)
-#define OP_LED_ASSOCIATED	   BIT(3)
-#define OP_LED_ON		   BIT(4)
-#define OP_PREAMBLE_SHORT	   BIT(5)
-#define OP_PROTECT_ENABLE	   BIT(6)
-#define OP_ASSOCIATED		   BIT(7)
-#define OP_ENABLE_BEACON	   BIT(8)
-#define OP_LED_DEINIT		   BIT(9)
-#define OP_UNPLUGGED		   BIT(10)
-#define OP_BT_PRIORITY_DETECTED	   BIT(11)
-#define OP_BT_SCAN		   BIT(12)
+#define OP_LED_ASSOCIATED	   BIT(2)
+#define OP_LED_ON		   BIT(3)
+#define OP_PREAMBLE_SHORT	   BIT(4)
+#define OP_PROTECT_ENABLE	   BIT(5)
+#define OP_ASSOCIATED		   BIT(6)
+#define OP_ENABLE_BEACON	   BIT(7)
+#define OP_LED_DEINIT		   BIT(8)
+#define OP_BT_PRIORITY_DETECTED    BIT(9)
+#define OP_BT_SCAN                 BIT(10)
 
 struct ath9k_htc_priv {
 	struct device *dev;
@@ -368,7 +366,7 @@ struct ath9k_htc_priv {
 	u16 seq_no;
 	u32 bmiss_cnt;
 
-	struct ath9k_hw_cal_data caldata[38];
+	struct ath9k_hw_cal_data caldata[ATH9K_NUM_CHANNELS];
 
 	spinlock_t beacon_lock;
 
@@ -378,7 +376,7 @@ struct ath9k_htc_priv {
 	struct ieee80211_vif *vif;
 	struct htc_beacon_config cur_beacon_conf;
 	unsigned int rxfilter;
-	struct tasklet_struct wmi_tasklet;
+	struct tasklet_struct swba_tasklet;
 	struct tasklet_struct rx_tasklet;
 	struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS];
 	struct ath9k_htc_rx rx;
@@ -386,6 +384,7 @@ struct ath9k_htc_priv {
 	struct sk_buff_head tx_queue;
 	struct delayed_work ath9k_ani_work;
 	struct work_struct ps_work;
+	struct work_struct fatal_work;
 
 	struct mutex htc_pm_lock;
 	unsigned long ps_usecount;
@@ -420,6 +419,8 @@ static inline void ath_read_cachesize(struct ath_common *common, int *csz)
 	common->bus_ops->read_cachesize(common, csz);
 }
 
+void ath9k_htc_reset(struct ath9k_htc_priv *priv);
+
 void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv);
 void ath9k_htc_beacon_config(struct ath9k_htc_priv *priv,
 			     struct ieee80211_vif *vif);
@@ -435,6 +436,7 @@ void ath9k_htc_beaconep(void *drv_priv, struct sk_buff *skb,
 void ath9k_htc_station_work(struct work_struct *work);
 void ath9k_htc_aggr_work(struct work_struct *work);
 void ath9k_ani_work(struct work_struct *work);;
+void ath_start_ani(struct ath9k_htc_priv *priv);
 
 int ath9k_tx_init(struct ath9k_htc_priv *priv);
 void ath9k_tx_tasklet(unsigned long data);
@@ -455,15 +457,23 @@ u32 ath9k_htc_calcrxfilter(struct ath9k_htc_priv *priv);
 void ath9k_htc_ps_wakeup(struct ath9k_htc_priv *priv);
 void ath9k_htc_ps_restore(struct ath9k_htc_priv *priv);
 void ath9k_ps_work(struct work_struct *work);
+bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
+			enum ath9k_power_mode mode);
+void ath_update_txpow(struct ath9k_htc_priv *priv);
 
 void ath9k_start_rfkill_poll(struct ath9k_htc_priv *priv);
+void ath9k_htc_rfkill_poll_state(struct ieee80211_hw *hw);
+void ath9k_htc_radio_enable(struct ieee80211_hw *hw);
+void ath9k_htc_radio_disable(struct ieee80211_hw *hw);
+void ath9k_led_stop_brightness(struct ath9k_htc_priv *priv);
 void ath9k_init_leds(struct ath9k_htc_priv *priv);
 void ath9k_deinit_leds(struct ath9k_htc_priv *priv);
 
 int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
-			   u16 devid, char *product);
+			   u16 devid, char *product, u32 drv_info);
 void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug);
 #ifdef CONFIG_PM
+void ath9k_htc_suspend(struct htc_target *htc_handle);
 int ath9k_htc_resume(struct htc_target *htc_handle);
 #endif
 #ifdef CONFIG_ATH9K_HTC_DEBUGFS
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
index 1b72aa482ac..87cc65a78a3 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c
@@ -123,11 +123,11 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 	/* TSF out of range threshold fixed at 1 second */
 	bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
 
-	ath_print(common, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
-	ath_print(common, ATH_DBG_BEACON,
-		  "bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
-		  bs.bs_bmissthreshold, bs.bs_sleepduration,
-		  bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
+	ath_dbg(common, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
+	ath_dbg(common, ATH_DBG_BEACON,
+		"bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
+		bs.bs_bmissthreshold, bs.bs_sleepduration,
+		bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
 
 	/* Set the computed STA beacon timers */
 
@@ -154,9 +154,9 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
 	if (priv->op_flags & OP_ENABLE_BEACON)
 		imask |= ATH9K_INT_SWBA;
 
-	ath_print(common, ATH_DBG_BEACON,
-		  "IBSS Beacon config, intval: %d, imask: 0x%x\n",
-		  bss_conf->beacon_interval, imask);
+	ath_dbg(common, ATH_DBG_BEACON,
+		"IBSS Beacon config, intval: %d, imask: 0x%x\n",
+		bss_conf->beacon_interval, imask);
 
 	WMI_CMD(WMI_DISABLE_INTR_CMDID);
 	ath9k_hw_beaconinit(priv->ah, nexttbtt, intval);
@@ -246,8 +246,8 @@ void ath9k_htc_beaconq_config(struct ath9k_htc_priv *priv)
 	qi.tqi_cwmax = qi_be.tqi_cwmax;
 
 	if (!ath9k_hw_set_txq_props(ah, priv->beaconq, &qi)) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-			  "Unable to update beacon queue %u!\n", qnum);
+		ath_err(ath9k_hw_common(ah),
+			"Unable to update beacon queue %u!\n", qnum);
 	} else {
 		ath9k_hw_resettxqueue(ah, priv->beaconq);
 	}
@@ -278,8 +278,8 @@ void ath9k_htc_beacon_config(struct ath9k_htc_priv *priv,
 		ath9k_htc_beacon_config_adhoc(priv, cur_conf);
 		break;
 	default:
-		ath_print(common, ATH_DBG_CONFIG,
-			  "Unsupported beaconing mode\n");
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"Unsupported beaconing mode\n");
 		return;
 	}
 }
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
index 50eec9a3b88..fe70f67aa08 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_gpio.c
@@ -1,3 +1,19 @@
+/*
+ * Copyright (c) 2010 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
 #include "htc.h"
 
 /******************/
@@ -20,13 +36,13 @@ static void ath_detect_bt_priority(struct ath9k_htc_priv *priv)
 		priv->op_flags &= ~(OP_BT_PRIORITY_DETECTED | OP_BT_SCAN);
 		/* Detect if colocated bt started scanning */
 		if (btcoex->bt_priority_cnt >= ATH_BT_CNT_SCAN_THRESHOLD) {
-			ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
-				  "BT scan detected");
+			ath_dbg(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+				"BT scan detected\n");
 			priv->op_flags |= (OP_BT_SCAN |
 					 OP_BT_PRIORITY_DETECTED);
 		} else if (btcoex->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
-			ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
-				    "BT priority traffic detected");
+			ath_dbg(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+				"BT priority traffic detected\n");
 			priv->op_flags |= OP_BT_PRIORITY_DETECTED;
 		}
 
@@ -83,8 +99,8 @@ static void ath_btcoex_duty_cycle_work(struct work_struct *work)
 	struct ath_common *common = ath9k_hw_common(ah);
 	bool is_btscan = priv->op_flags & OP_BT_SCAN;
 
-	ath_print(common, ATH_DBG_BTCOEX,
-		  "time slice work for bt and wlan\n");
+	ath_dbg(common, ATH_DBG_BTCOEX,
+		"time slice work for bt and wlan\n");
 
 	if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW || is_btscan)
 		ath9k_cmn_btcoex_bt_stomp(common, ATH_BTCOEX_STOMP_NONE);
@@ -114,8 +130,7 @@ void ath_htc_resume_btcoex_work(struct ath9k_htc_priv *priv)
 	struct ath_btcoex *btcoex = &priv->btcoex;
 	struct ath_hw *ah = priv->ah;
 
-	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
-		  "Starting btcoex work");
+	ath_dbg(ath9k_hw_common(ah), ATH_DBG_BTCOEX, "Starting btcoex work\n");
 
 	btcoex->bt_priority_cnt = 0;
 	btcoex->bt_priority_time = jiffies;
@@ -132,3 +147,314 @@ void ath_htc_cancel_btcoex_work(struct ath9k_htc_priv *priv)
 	cancel_delayed_work_sync(&priv->coex_period_work);
 	cancel_delayed_work_sync(&priv->duty_cycle_work);
 }
+
+/*******/
+/* LED */
+/*******/
+
+static void ath9k_led_blink_work(struct work_struct *work)
+{
+	struct ath9k_htc_priv *priv = container_of(work, struct ath9k_htc_priv,
+						   ath9k_led_blink_work.work);
+
+	if (!(priv->op_flags & OP_LED_ASSOCIATED))
+		return;
+
+	if ((priv->led_on_duration == ATH_LED_ON_DURATION_IDLE) ||
+	    (priv->led_off_duration == ATH_LED_OFF_DURATION_IDLE))
+		ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 0);
+	else
+		ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin,
+				  (priv->op_flags & OP_LED_ON) ? 1 : 0);
+
+	ieee80211_queue_delayed_work(priv->hw,
+				     &priv->ath9k_led_blink_work,
+				     (priv->op_flags & OP_LED_ON) ?
+				     msecs_to_jiffies(priv->led_off_duration) :
+				     msecs_to_jiffies(priv->led_on_duration));
+
+	priv->led_on_duration = priv->led_on_cnt ?
+		max((ATH_LED_ON_DURATION_IDLE - priv->led_on_cnt), 25) :
+		ATH_LED_ON_DURATION_IDLE;
+	priv->led_off_duration = priv->led_off_cnt ?
+		max((ATH_LED_OFF_DURATION_IDLE - priv->led_off_cnt), 10) :
+		ATH_LED_OFF_DURATION_IDLE;
+	priv->led_on_cnt = priv->led_off_cnt = 0;
+
+	if (priv->op_flags & OP_LED_ON)
+		priv->op_flags &= ~OP_LED_ON;
+	else
+		priv->op_flags |= OP_LED_ON;
+}
+
+static void ath9k_led_brightness_work(struct work_struct *work)
+{
+	struct ath_led *led = container_of(work, struct ath_led,
+					   brightness_work.work);
+	struct ath9k_htc_priv *priv = led->priv;
+
+	switch (led->brightness) {
+	case LED_OFF:
+		if (led->led_type == ATH_LED_ASSOC ||
+		    led->led_type == ATH_LED_RADIO) {
+			ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin,
+					  (led->led_type == ATH_LED_RADIO));
+			priv->op_flags &= ~OP_LED_ASSOCIATED;
+			if (led->led_type == ATH_LED_RADIO)
+				priv->op_flags &= ~OP_LED_ON;
+		} else {
+			priv->led_off_cnt++;
+		}
+		break;
+	case LED_FULL:
+		if (led->led_type == ATH_LED_ASSOC) {
+			priv->op_flags |= OP_LED_ASSOCIATED;
+			ieee80211_queue_delayed_work(priv->hw,
+					     &priv->ath9k_led_blink_work, 0);
+		} else if (led->led_type == ATH_LED_RADIO) {
+			ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 0);
+			priv->op_flags |= OP_LED_ON;
+		} else {
+			priv->led_on_cnt++;
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static void ath9k_led_brightness(struct led_classdev *led_cdev,
+				 enum led_brightness brightness)
+{
+	struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev);
+	struct ath9k_htc_priv *priv = led->priv;
+
+	led->brightness = brightness;
+	if (!(priv->op_flags & OP_LED_DEINIT))
+		ieee80211_queue_delayed_work(priv->hw,
+					     &led->brightness_work, 0);
+}
+
+void ath9k_led_stop_brightness(struct ath9k_htc_priv *priv)
+{
+	cancel_delayed_work_sync(&priv->radio_led.brightness_work);
+	cancel_delayed_work_sync(&priv->assoc_led.brightness_work);
+	cancel_delayed_work_sync(&priv->tx_led.brightness_work);
+	cancel_delayed_work_sync(&priv->rx_led.brightness_work);
+}
+
+static int ath9k_register_led(struct ath9k_htc_priv *priv, struct ath_led *led,
+			      char *trigger)
+{
+	int ret;
+
+	led->priv = priv;
+	led->led_cdev.name = led->name;
+	led->led_cdev.default_trigger = trigger;
+	led->led_cdev.brightness_set = ath9k_led_brightness;
+
+	ret = led_classdev_register(wiphy_dev(priv->hw->wiphy), &led->led_cdev);
+	if (ret)
+		ath_err(ath9k_hw_common(priv->ah),
+			"Failed to register led:%s", led->name);
+	else
+		led->registered = 1;
+
+	INIT_DELAYED_WORK(&led->brightness_work, ath9k_led_brightness_work);
+
+	return ret;
+}
+
+static void ath9k_unregister_led(struct ath_led *led)
+{
+	if (led->registered) {
+		led_classdev_unregister(&led->led_cdev);
+		led->registered = 0;
+	}
+}
+
+void ath9k_deinit_leds(struct ath9k_htc_priv *priv)
+{
+	priv->op_flags |= OP_LED_DEINIT;
+	ath9k_unregister_led(&priv->assoc_led);
+	priv->op_flags &= ~OP_LED_ASSOCIATED;
+	ath9k_unregister_led(&priv->tx_led);
+	ath9k_unregister_led(&priv->rx_led);
+	ath9k_unregister_led(&priv->radio_led);
+}
+
+void ath9k_init_leds(struct ath9k_htc_priv *priv)
+{
+	char *trigger;
+	int ret;
+
+	if (AR_SREV_9287(priv->ah))
+		priv->ah->led_pin = ATH_LED_PIN_9287;
+	else if (AR_SREV_9271(priv->ah))
+		priv->ah->led_pin = ATH_LED_PIN_9271;
+	else if (AR_DEVID_7010(priv->ah))
+		priv->ah->led_pin = ATH_LED_PIN_7010;
+	else
+		priv->ah->led_pin = ATH_LED_PIN_DEF;
+
+	/* Configure gpio 1 for output */
+	ath9k_hw_cfg_output(priv->ah, priv->ah->led_pin,
+			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+	/* LED off, active low */
+	ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 1);
+
+	INIT_DELAYED_WORK(&priv->ath9k_led_blink_work, ath9k_led_blink_work);
+
+	trigger = ieee80211_get_radio_led_name(priv->hw);
+	snprintf(priv->radio_led.name, sizeof(priv->radio_led.name),
+		"ath9k-%s::radio", wiphy_name(priv->hw->wiphy));
+	ret = ath9k_register_led(priv, &priv->radio_led, trigger);
+	priv->radio_led.led_type = ATH_LED_RADIO;
+	if (ret)
+		goto fail;
+
+	trigger = ieee80211_get_assoc_led_name(priv->hw);
+	snprintf(priv->assoc_led.name, sizeof(priv->assoc_led.name),
+		"ath9k-%s::assoc", wiphy_name(priv->hw->wiphy));
+	ret = ath9k_register_led(priv, &priv->assoc_led, trigger);
+	priv->assoc_led.led_type = ATH_LED_ASSOC;
+	if (ret)
+		goto fail;
+
+	trigger = ieee80211_get_tx_led_name(priv->hw);
+	snprintf(priv->tx_led.name, sizeof(priv->tx_led.name),
+		"ath9k-%s::tx", wiphy_name(priv->hw->wiphy));
+	ret = ath9k_register_led(priv, &priv->tx_led, trigger);
+	priv->tx_led.led_type = ATH_LED_TX;
+	if (ret)
+		goto fail;
+
+	trigger = ieee80211_get_rx_led_name(priv->hw);
+	snprintf(priv->rx_led.name, sizeof(priv->rx_led.name),
+		"ath9k-%s::rx", wiphy_name(priv->hw->wiphy));
+	ret = ath9k_register_led(priv, &priv->rx_led, trigger);
+	priv->rx_led.led_type = ATH_LED_RX;
+	if (ret)
+		goto fail;
+
+	priv->op_flags &= ~OP_LED_DEINIT;
+
+	return;
+
+fail:
+	cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
+	ath9k_deinit_leds(priv);
+}
+
+/*******************/
+/*	Rfkill	   */
+/*******************/
+
+static bool ath_is_rfkill_set(struct ath9k_htc_priv *priv)
+{
+	return ath9k_hw_gpio_get(priv->ah, priv->ah->rfkill_gpio) ==
+		priv->ah->rfkill_polarity;
+}
+
+void ath9k_htc_rfkill_poll_state(struct ieee80211_hw *hw)
+{
+	struct ath9k_htc_priv *priv = hw->priv;
+	bool blocked = !!ath_is_rfkill_set(priv);
+
+	wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
+}
+
+void ath9k_start_rfkill_poll(struct ath9k_htc_priv *priv)
+{
+	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
+		wiphy_rfkill_start_polling(priv->hw->wiphy);
+}
+
+void ath9k_htc_radio_enable(struct ieee80211_hw *hw)
+{
+	struct ath9k_htc_priv *priv = hw->priv;
+	struct ath_hw *ah = priv->ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	int ret;
+	u8 cmd_rsp;
+
+	if (!ah->curchan)
+		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
+
+	/* Reset the HW */
+	ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
+	if (ret) {
+		ath_err(common,
+			"Unable to reset hardware; reset status %d (freq %u MHz)\n",
+			ret, ah->curchan->channel);
+	}
+
+	ath_update_txpow(priv);
+
+	/* Start RX */
+	WMI_CMD(WMI_START_RECV_CMDID);
+	ath9k_host_rx_init(priv);
+
+	/* Start TX */
+	htc_start(priv->htc);
+	spin_lock_bh(&priv->tx_lock);
+	priv->tx_queues_stop = false;
+	spin_unlock_bh(&priv->tx_lock);
+	ieee80211_wake_queues(hw);
+
+	WMI_CMD(WMI_ENABLE_INTR_CMDID);
+
+	/* Enable LED */
+	ath9k_hw_cfg_output(ah, ah->led_pin,
+			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+	ath9k_hw_set_gpio(ah, ah->led_pin, 0);
+}
+
+void ath9k_htc_radio_disable(struct ieee80211_hw *hw)
+{
+	struct ath9k_htc_priv *priv = hw->priv;
+	struct ath_hw *ah = priv->ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	int ret;
+	u8 cmd_rsp;
+
+	ath9k_htc_ps_wakeup(priv);
+
+	/* Disable LED */
+	ath9k_hw_set_gpio(ah, ah->led_pin, 1);
+	ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
+
+	WMI_CMD(WMI_DISABLE_INTR_CMDID);
+
+	/* Stop TX */
+	ieee80211_stop_queues(hw);
+	htc_stop(priv->htc);
+	WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
+	skb_queue_purge(&priv->tx_queue);
+
+	/* Stop RX */
+	WMI_CMD(WMI_STOP_RECV_CMDID);
+
+	/*
+	 * The MIB counters have to be disabled here,
+	 * since the target doesn't do it.
+	 */
+	ath9k_hw_disable_mib_counters(ah);
+
+	if (!ah->curchan)
+		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
+
+	/* Reset the HW */
+	ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
+	if (ret) {
+		ath_err(common,
+			"Unable to reset hardware; reset status %d (freq %u MHz)\n",
+			ret, ah->curchan->channel);
+	}
+
+	/* Disable the PHY */
+	ath9k_hw_phy_disable(ah);
+
+	ath9k_htc_ps_restore(priv);
+	ath9k_htc_setpower(priv, ATH9K_PM_FULL_SLEEP);
+}
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
index 3d7b97f1b3a..38433f9bfe5 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c
@@ -142,7 +142,7 @@ static void ath9k_deinit_priv(struct ath9k_htc_priv *priv)
 {
 	ath9k_htc_exit_debug(priv->ah);
 	ath9k_hw_deinit(priv->ah);
-	tasklet_kill(&priv->wmi_tasklet);
+	tasklet_kill(&priv->swba_tasklet);
 	tasklet_kill(&priv->rx_tasklet);
 	tasklet_kill(&priv->tx_tasklet);
 	kfree(priv->ah);
@@ -181,7 +181,8 @@ static inline int ath9k_htc_connect_svc(struct ath9k_htc_priv *priv,
 	return htc_connect_service(priv->htc, &req, ep_id);
 }
 
-static int ath9k_init_htc_services(struct ath9k_htc_priv *priv, u16 devid)
+static int ath9k_init_htc_services(struct ath9k_htc_priv *priv, u16 devid,
+				   u32 drv_info)
 {
 	int ret;
 
@@ -245,15 +246,10 @@ static int ath9k_init_htc_services(struct ath9k_htc_priv *priv, u16 devid)
 	 * the HIF layer, shouldn't matter much.
 	 */
 
-	switch(devid) {
-	case 0x7010:
-	case 0x7015:
-	case 0x9018:
+	if (IS_AR7010_DEVICE(drv_info))
 		priv->htc->credits = 45;
-		break;
-	default:
+	else
 		priv->htc->credits = 33;
-	}
 
 	ret = htc_init(priv->htc);
 	if (ret)
@@ -292,9 +288,9 @@ static unsigned int ath9k_regread(void *hw_priv, u32 reg_offset)
 			  (u8 *) &val, sizeof(val),
 			  100);
 	if (unlikely(r)) {
-		ath_print(common, ATH_DBG_WMI,
-			  "REGISTER READ FAILED: (0x%04x, %d)\n",
-			   reg_offset, r);
+		ath_dbg(common, ATH_DBG_WMI,
+			"REGISTER READ FAILED: (0x%04x, %d)\n",
+			reg_offset, r);
 		return -EIO;
 	}
 
@@ -306,7 +302,7 @@ static void ath9k_regwrite_single(void *hw_priv, u32 val, u32 reg_offset)
 	struct ath_hw *ah = (struct ath_hw *) hw_priv;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) common->priv;
-	__be32 buf[2] = {
+	const __be32 buf[2] = {
 		cpu_to_be32(reg_offset),
 		cpu_to_be32(val),
 	};
@@ -317,9 +313,9 @@ static void ath9k_regwrite_single(void *hw_priv, u32 val, u32 reg_offset)
 			  (u8 *) &val, sizeof(val),
 			  100);
 	if (unlikely(r)) {
-		ath_print(common, ATH_DBG_WMI,
-			  "REGISTER WRITE FAILED:(0x%04x, %d)\n",
-			  reg_offset, r);
+		ath_dbg(common, ATH_DBG_WMI,
+			"REGISTER WRITE FAILED:(0x%04x, %d)\n",
+			reg_offset, r);
 	}
 }
 
@@ -349,9 +345,9 @@ static void ath9k_regwrite_buffer(void *hw_priv, u32 val, u32 reg_offset)
 			  (u8 *) &rsp_status, sizeof(rsp_status),
 			  100);
 		if (unlikely(r)) {
-			ath_print(common, ATH_DBG_WMI,
-				  "REGISTER WRITE FAILED, multi len: %d\n",
-				  priv->wmi->multi_write_idx);
+			ath_dbg(common, ATH_DBG_WMI,
+				"REGISTER WRITE FAILED, multi len: %d\n",
+				priv->wmi->multi_write_idx);
 		}
 		priv->wmi->multi_write_idx = 0;
 	}
@@ -399,9 +395,9 @@ static void ath9k_regwrite_flush(void *hw_priv)
 			  (u8 *) &rsp_status, sizeof(rsp_status),
 			  100);
 		if (unlikely(r)) {
-			ath_print(common, ATH_DBG_WMI,
-				  "REGISTER WRITE FAILED, multi len: %d\n",
-				  priv->wmi->multi_write_idx);
+			ath_dbg(common, ATH_DBG_WMI,
+				"REGISTER WRITE FAILED, multi len: %d\n",
+				priv->wmi->multi_write_idx);
 		}
 		priv->wmi->multi_write_idx = 0;
 	}
@@ -473,9 +469,9 @@ static void setup_ht_cap(struct ath9k_htc_priv *priv,
 	tx_streams = ath9k_cmn_count_streams(common->tx_chainmask, 2);
 	rx_streams = ath9k_cmn_count_streams(common->rx_chainmask, 2);
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "TX streams %d, RX streams: %d\n",
-		  tx_streams, rx_streams);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"TX streams %d, RX streams: %d\n",
+		tx_streams, rx_streams);
 
 	if (tx_streams != rx_streams) {
 		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
@@ -499,37 +495,31 @@ static int ath9k_init_queues(struct ath9k_htc_priv *priv)
 
 	priv->beaconq = ath9k_hw_beaconq_setup(priv->ah);
 	if (priv->beaconq == -1) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup BEACON xmit queue\n");
+		ath_err(common, "Unable to setup BEACON xmit queue\n");
 		goto err;
 	}
 
 	priv->cabq = ath9k_htc_cabq_setup(priv);
 	if (priv->cabq == -1) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup CAB xmit queue\n");
+		ath_err(common, "Unable to setup CAB xmit queue\n");
 		goto err;
 	}
 
 	if (!ath9k_htc_txq_setup(priv, WME_AC_BE)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for BE traffic\n");
+		ath_err(common, "Unable to setup xmit queue for BE traffic\n");
 		goto err;
 	}
 
 	if (!ath9k_htc_txq_setup(priv, WME_AC_BK)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for BK traffic\n");
+		ath_err(common, "Unable to setup xmit queue for BK traffic\n");
 		goto err;
 	}
 	if (!ath9k_htc_txq_setup(priv, WME_AC_VI)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for VI traffic\n");
+		ath_err(common, "Unable to setup xmit queue for VI traffic\n");
 		goto err;
 	}
 	if (!ath9k_htc_txq_setup(priv, WME_AC_VO)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for VO traffic\n");
+		ath_err(common, "Unable to setup xmit queue for VO traffic\n");
 		goto err;
 	}
 
@@ -547,9 +537,9 @@ static void ath9k_init_crypto(struct ath9k_htc_priv *priv)
 	/* Get the hardware key cache size. */
 	common->keymax = priv->ah->caps.keycache_size;
 	if (common->keymax > ATH_KEYMAX) {
-		ath_print(common, ATH_DBG_ANY,
-			  "Warning, using only %u entries in %u key cache\n",
-			  ATH_KEYMAX, common->keymax);
+		ath_dbg(common, ATH_DBG_ANY,
+			"Warning, using only %u entries in %u key cache\n",
+			ATH_KEYMAX, common->keymax);
 		common->keymax = ATH_KEYMAX;
 	}
 
@@ -625,7 +615,8 @@ static void ath9k_init_btcoex(struct ath9k_htc_priv *priv)
 }
 
 static int ath9k_init_priv(struct ath9k_htc_priv *priv,
-			   u16 devid, char *product)
+			   u16 devid, char *product,
+			   u32 drv_info)
 {
 	struct ath_hw *ah = NULL;
 	struct ath_common *common;
@@ -639,6 +630,8 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv,
 
 	ah->hw_version.devid = devid;
 	ah->hw_version.subsysid = 0; /* FIXME */
+	ah->hw_version.usbdev = drv_info;
+	ah->ah_flags |= AH_USE_EEPROM;
 	priv->ah = ah;
 
 	common = ath9k_hw_common(ah);
@@ -654,13 +647,15 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv,
 	spin_lock_init(&priv->tx_lock);
 	mutex_init(&priv->mutex);
 	mutex_init(&priv->htc_pm_lock);
-	tasklet_init(&priv->wmi_tasklet, ath9k_wmi_tasklet,
+	tasklet_init(&priv->swba_tasklet, ath9k_swba_tasklet,
 		     (unsigned long)priv);
 	tasklet_init(&priv->rx_tasklet, ath9k_rx_tasklet,
 		     (unsigned long)priv);
-	tasklet_init(&priv->tx_tasklet, ath9k_tx_tasklet, (unsigned long)priv);
+	tasklet_init(&priv->tx_tasklet, ath9k_tx_tasklet,
+		     (unsigned long)priv);
 	INIT_DELAYED_WORK(&priv->ath9k_ani_work, ath9k_ani_work);
 	INIT_WORK(&priv->ps_work, ath9k_ps_work);
+	INIT_WORK(&priv->fatal_work, ath9k_fatal_work);
 
 	/*
 	 * Cache line size is used to size and align various
@@ -671,16 +666,15 @@ static int ath9k_init_priv(struct ath9k_htc_priv *priv,
 
 	ret = ath9k_hw_init(ah);
 	if (ret) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to initialize hardware; "
-			  "initialization status: %d\n", ret);
+		ath_err(common,
+			"Unable to initialize hardware; initialization status: %d\n",
+			ret);
 		goto err_hw;
 	}
 
 	ret = ath9k_htc_init_debug(ah);
 	if (ret) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to create debugfs files\n");
+		ath_err(common, "Unable to create debugfs files\n");
 		goto err_debug;
 	}
 
@@ -760,7 +754,7 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv,
 }
 
 static int ath9k_init_device(struct ath9k_htc_priv *priv,
-			     u16 devid, char *product)
+			     u16 devid, char *product, u32 drv_info)
 {
 	struct ieee80211_hw *hw = priv->hw;
 	struct ath_common *common;
@@ -769,7 +763,7 @@ static int ath9k_init_device(struct ath9k_htc_priv *priv,
 	struct ath_regulatory *reg;
 
 	/* Bring up device */
-	error = ath9k_init_priv(priv, devid, product);
+	error = ath9k_init_priv(priv, devid, product, drv_info);
 	if (error != 0)
 		goto err_init;
 
@@ -827,7 +821,7 @@ err_init:
 }
 
 int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
-			   u16 devid, char *product)
+			   u16 devid, char *product, u32 drv_info)
 {
 	struct ieee80211_hw *hw;
 	struct ath9k_htc_priv *priv;
@@ -854,14 +848,11 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev,
 		goto err_free;
 	}
 
-	ret = ath9k_init_htc_services(priv, devid);
+	ret = ath9k_init_htc_services(priv, devid, drv_info);
 	if (ret)
 		goto err_init;
 
-	/* The device may have been unplugged earlier. */
-	priv->op_flags &= ~OP_UNPLUGGED;
-
-	ret = ath9k_init_device(priv, devid, product);
+	ret = ath9k_init_device(priv, devid, product, drv_info);
 	if (ret)
 		goto err_init;
 
@@ -880,7 +871,7 @@ void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug)
 
 		/* Check if the device has been yanked out. */
 		if (hotunplug)
-			htc_handle->drv_priv->op_flags |= OP_UNPLUGGED;
+			htc_handle->drv_priv->ah->ah_flags |= AH_UNPLUGGED;
 
 		ath9k_deinit_device(htc_handle->drv_priv);
 		ath9k_deinit_wmi(htc_handle->drv_priv);
@@ -889,16 +880,23 @@ void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug)
 }
 
 #ifdef CONFIG_PM
+
+void ath9k_htc_suspend(struct htc_target *htc_handle)
+{
+	ath9k_htc_setpower(htc_handle->drv_priv, ATH9K_PM_FULL_SLEEP);
+}
+
 int ath9k_htc_resume(struct htc_target *htc_handle)
 {
+	struct ath9k_htc_priv *priv = htc_handle->drv_priv;
 	int ret;
 
-	ret = ath9k_htc_wait_for_target(htc_handle->drv_priv);
+	ret = ath9k_htc_wait_for_target(priv);
 	if (ret)
 		return ret;
 
-	ret = ath9k_init_htc_services(htc_handle->drv_priv,
-			      htc_handle->drv_priv->ah->hw_version.devid);
+	ret = ath9k_init_htc_services(priv, priv->ah->hw_version.devid,
+				      priv->ah->hw_version.usbdev);
 	return ret;
 }
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index 9a3be8da755..845b4c938d1 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -24,12 +24,12 @@ static struct dentry *ath9k_debugfs_root;
 /* Utilities */
 /*************/
 
-static void ath_update_txpow(struct ath9k_htc_priv *priv)
+void ath_update_txpow(struct ath9k_htc_priv *priv)
 {
 	struct ath_hw *ah = priv->ah;
 
 	if (priv->curtxpow != priv->txpowlimit) {
-		ath9k_hw_set_txpowerlimit(ah, priv->txpowlimit);
+		ath9k_hw_set_txpowerlimit(ah, priv->txpowlimit, false);
 		/* read back in case value is clamped */
 		priv->curtxpow = ath9k_hw_regulatory(ah)->power_limit;
 	}
@@ -63,8 +63,8 @@ static enum htc_phymode ath9k_htc_get_curmode(struct ath9k_htc_priv *priv,
 	return mode;
 }
 
-static bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
-			       enum ath9k_power_mode mode)
+bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
+			enum ath9k_power_mode mode)
 {
 	bool ret;
 
@@ -116,6 +116,60 @@ void ath9k_ps_work(struct work_struct *work)
 	ath9k_htc_setpower(priv, ATH9K_PM_NETWORK_SLEEP);
 }
 
+void ath9k_htc_reset(struct ath9k_htc_priv *priv)
+{
+	struct ath_hw *ah = priv->ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ieee80211_channel *channel = priv->hw->conf.channel;
+	struct ath9k_hw_cal_data *caldata;
+	enum htc_phymode mode;
+	__be16 htc_mode;
+	u8 cmd_rsp;
+	int ret;
+
+	mutex_lock(&priv->mutex);
+	ath9k_htc_ps_wakeup(priv);
+
+	if (priv->op_flags & OP_ASSOCIATED)
+		cancel_delayed_work_sync(&priv->ath9k_ani_work);
+
+	ieee80211_stop_queues(priv->hw);
+	htc_stop(priv->htc);
+	WMI_CMD(WMI_DISABLE_INTR_CMDID);
+	WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
+	WMI_CMD(WMI_STOP_RECV_CMDID);
+
+	caldata = &priv->caldata[channel->hw_value];
+	ret = ath9k_hw_reset(ah, ah->curchan, caldata, false);
+	if (ret) {
+		ath_err(common,
+			"Unable to reset device (%u Mhz) reset status %d\n",
+			channel->center_freq, ret);
+	}
+
+	ath_update_txpow(priv);
+
+	WMI_CMD(WMI_START_RECV_CMDID);
+	ath9k_host_rx_init(priv);
+
+	mode = ath9k_htc_get_curmode(priv, ah->curchan);
+	htc_mode = cpu_to_be16(mode);
+	WMI_CMD_BUF(WMI_SET_MODE_CMDID, &htc_mode);
+
+	WMI_CMD(WMI_ENABLE_INTR_CMDID);
+	htc_start(priv->htc);
+
+	if (priv->op_flags & OP_ASSOCIATED) {
+		ath9k_htc_beacon_config(priv, priv->vif);
+		ath_start_ani(priv);
+	}
+
+	ieee80211_wake_queues(priv->hw);
+
+	ath9k_htc_ps_restore(priv);
+	mutex_unlock(&priv->mutex);
+}
+
 static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 				 struct ieee80211_hw *hw,
 				 struct ath9k_channel *hchan)
@@ -123,7 +177,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 	struct ath_hw *ah = priv->ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_conf *conf = &common->hw->conf;
-	bool fastcc = true;
+	bool fastcc;
 	struct ieee80211_channel *channel = hw->conf.channel;
 	struct ath9k_hw_cal_data *caldata;
 	enum htc_phymode mode;
@@ -134,8 +188,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 	if (priv->op_flags & OP_INVALID)
 		return -EIO;
 
-	if (priv->op_flags & OP_FULL_RESET)
-		fastcc = false;
+	fastcc = !!(hw->conf.flags & IEEE80211_CONF_OFFCHANNEL);
 
 	ath9k_htc_ps_wakeup(priv);
 	htc_stop(priv->htc);
@@ -143,18 +196,18 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 	WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
 	WMI_CMD(WMI_STOP_RECV_CMDID);
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "(%u MHz) -> (%u MHz), HT: %d, HT40: %d fastcc: %d\n",
-		  priv->ah->curchan->channel,
-		  channel->center_freq, conf_is_ht(conf), conf_is_ht40(conf),
-		  fastcc);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"(%u MHz) -> (%u MHz), HT: %d, HT40: %d fastcc: %d\n",
+		priv->ah->curchan->channel,
+		channel->center_freq, conf_is_ht(conf), conf_is_ht40(conf),
+		fastcc);
 
 	caldata = &priv->caldata[channel->hw_value];
 	ret = ath9k_hw_reset(ah, hchan, caldata, fastcc);
 	if (ret) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to reset channel (%u Mhz) "
-			  "reset status %d\n", channel->center_freq, ret);
+		ath_err(common,
+			"Unable to reset channel (%u Mhz) reset status %d\n",
+			channel->center_freq, ret);
 		goto err;
 	}
 
@@ -177,23 +230,43 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 		goto err;
 
 	htc_start(priv->htc);
-
-	priv->op_flags &= ~OP_FULL_RESET;
 err:
 	ath9k_htc_ps_restore(priv);
 	return ret;
 }
 
+static void __ath9k_htc_remove_monitor_interface(struct ath9k_htc_priv *priv)
+{
+	struct ath_common *common = ath9k_hw_common(priv->ah);
+	struct ath9k_htc_target_vif hvif;
+	int ret = 0;
+	u8 cmd_rsp;
+
+	memset(&hvif, 0, sizeof(struct ath9k_htc_target_vif));
+	memcpy(&hvif.myaddr, common->macaddr, ETH_ALEN);
+	hvif.index = 0; /* Should do for now */
+	WMI_CMD_BUF(WMI_VAP_REMOVE_CMDID, &hvif);
+	priv->nvifs--;
+}
+
 static int ath9k_htc_add_monitor_interface(struct ath9k_htc_priv *priv)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	struct ath9k_htc_target_vif hvif;
+	struct ath9k_htc_target_sta tsta;
 	int ret = 0;
 	u8 cmd_rsp;
 
 	if (priv->nvifs > 0)
 		return -ENOBUFS;
 
+	if (priv->nstations >= ATH9K_HTC_MAX_STA)
+		return -ENOBUFS;
+
+	/*
+	 * Add an interface.
+	 */
+
 	memset(&hvif, 0, sizeof(struct ath9k_htc_target_vif));
 	memcpy(&hvif.myaddr, common->macaddr, ETH_ALEN);
 
@@ -206,23 +279,57 @@ static int ath9k_htc_add_monitor_interface(struct ath9k_htc_priv *priv)
 		return ret;
 
 	priv->nvifs++;
+
+	/*
+	 * Associate a station with the interface for packet injection.
+	 */
+
+	memset(&tsta, 0, sizeof(struct ath9k_htc_target_sta));
+
+	memcpy(&tsta.macaddr, common->macaddr, ETH_ALEN);
+
+	tsta.is_vif_sta = 1;
+	tsta.sta_index = priv->nstations;
+	tsta.vif_index = hvif.index;
+	tsta.maxampdu = 0xffff;
+
+	WMI_CMD_BUF(WMI_NODE_CREATE_CMDID, &tsta);
+	if (ret) {
+		ath_err(common, "Unable to add station entry for monitor mode\n");
+		goto err_vif;
+	}
+
+	priv->nstations++;
+
 	return 0;
+
+err_vif:
+	/*
+	 * Remove the interface from the target.
+	 */
+	__ath9k_htc_remove_monitor_interface(priv);
+	return ret;
 }
 
 static int ath9k_htc_remove_monitor_interface(struct ath9k_htc_priv *priv)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
-	struct ath9k_htc_target_vif hvif;
 	int ret = 0;
-	u8 cmd_rsp;
+	u8 cmd_rsp, sta_idx;
 
-	memset(&hvif, 0, sizeof(struct ath9k_htc_target_vif));
-	memcpy(&hvif.myaddr, common->macaddr, ETH_ALEN);
-	hvif.index = 0; /* Should do for now */
-	WMI_CMD_BUF(WMI_VAP_REMOVE_CMDID, &hvif);
-	priv->nvifs--;
+	__ath9k_htc_remove_monitor_interface(priv);
 
-	return ret;
+	sta_idx = 0; /* Only single interface, for now */
+
+	WMI_CMD_BUF(WMI_NODE_REMOVE_CMDID, &sta_idx);
+	if (ret) {
+		ath_err(common, "Unable to remove station entry for monitor mode\n");
+		return ret;
+	}
+
+	priv->nstations--;
+
+	return 0;
 }
 
 static int ath9k_htc_add_station(struct ath9k_htc_priv *priv,
@@ -263,15 +370,16 @@ static int ath9k_htc_add_station(struct ath9k_htc_priv *priv,
 	WMI_CMD_BUF(WMI_NODE_CREATE_CMDID, &tsta);
 	if (ret) {
 		if (sta)
-			ath_print(common, ATH_DBG_FATAL,
-			  "Unable to add station entry for: %pM\n", sta->addr);
+			ath_err(common,
+				"Unable to add station entry for: %pM\n",
+				sta->addr);
 		return ret;
 	}
 
 	if (sta)
-		ath_print(common, ATH_DBG_CONFIG,
-			  "Added a station entry for: %pM (idx: %d)\n",
-			  sta->addr, tsta.sta_index);
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"Added a station entry for: %pM (idx: %d)\n",
+			sta->addr, tsta.sta_index);
 
 	priv->nstations++;
 	return 0;
@@ -296,16 +404,16 @@ static int ath9k_htc_remove_station(struct ath9k_htc_priv *priv,
 	WMI_CMD_BUF(WMI_NODE_REMOVE_CMDID, &sta_idx);
 	if (ret) {
 		if (sta)
-			ath_print(common, ATH_DBG_FATAL,
-			  "Unable to remove station entry for: %pM\n",
-			  sta->addr);
+			ath_err(common,
+				"Unable to remove station entry for: %pM\n",
+				sta->addr);
 		return ret;
 	}
 
 	if (sta)
-		ath_print(common, ATH_DBG_CONFIG,
-			  "Removed a station entry for: %pM (idx: %d)\n",
-			  sta->addr, sta_idx);
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"Removed a station entry for: %pM (idx: %d)\n",
+			sta->addr, sta_idx);
 
 	priv->nstations--;
 	return 0;
@@ -390,8 +498,8 @@ static int ath9k_htc_send_rate_cmd(struct ath9k_htc_priv *priv,
 
 	WMI_CMD_BUF(WMI_RC_RATE_UPDATE_CMDID, trate);
 	if (ret) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to initialize Rate information on target\n");
+		ath_err(common,
+			"Unable to initialize Rate information on target\n");
 	}
 
 	return ret;
@@ -408,9 +516,9 @@ static void ath9k_htc_init_rate(struct ath9k_htc_priv *priv,
 	ath9k_htc_setup_rate(priv, sta, &trate);
 	ret = ath9k_htc_send_rate_cmd(priv, &trate);
 	if (!ret)
-		ath_print(common, ATH_DBG_CONFIG,
-			  "Updated target sta: %pM, rate caps: 0x%X\n",
-			  sta->addr, be32_to_cpu(trate.capflags));
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"Updated target sta: %pM, rate caps: 0x%X\n",
+			sta->addr, be32_to_cpu(trate.capflags));
 }
 
 static void ath9k_htc_update_rate(struct ath9k_htc_priv *priv,
@@ -435,9 +543,9 @@ static void ath9k_htc_update_rate(struct ath9k_htc_priv *priv,
 
 	ret = ath9k_htc_send_rate_cmd(priv, &trate);
 	if (!ret)
-		ath_print(common, ATH_DBG_CONFIG,
-			  "Updated target sta: %pM, rate caps: 0x%X\n",
-			  bss_conf->bssid, be32_to_cpu(trate.capflags));
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"Updated target sta: %pM, rate caps: 0x%X\n",
+			bss_conf->bssid, be32_to_cpu(trate.capflags));
 }
 
 static int ath9k_htc_tx_aggr_oper(struct ath9k_htc_priv *priv,
@@ -464,14 +572,14 @@ static int ath9k_htc_tx_aggr_oper(struct ath9k_htc_priv *priv,
 
 	WMI_CMD_BUF(WMI_TX_AGGR_ENABLE_CMDID, &aggr);
 	if (ret)
-		ath_print(common, ATH_DBG_CONFIG,
-			  "Unable to %s TX aggregation for (%pM, %d)\n",
-			  (aggr.aggr_enable) ? "start" : "stop", sta->addr, tid);
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"Unable to %s TX aggregation for (%pM, %d)\n",
+			(aggr.aggr_enable) ? "start" : "stop", sta->addr, tid);
 	else
-		ath_print(common, ATH_DBG_CONFIG,
-			  "%s TX aggregation for (%pM, %d)\n",
-			  (aggr.aggr_enable) ? "Starting" : "Stopping",
-			  sta->addr, tid);
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"%s TX aggregation for (%pM, %d)\n",
+			(aggr.aggr_enable) ? "Starting" : "Stopping",
+			sta->addr, tid);
 
 	spin_lock_bh(&priv->tx_lock);
 	ista->tid_state[tid] = (aggr.aggr_enable && !ret) ? AGGR_START : AGGR_STOP;
@@ -689,7 +797,7 @@ void ath9k_htc_debug_remove_root(void)
 /* ANI */
 /*******/
 
-static void ath_start_ani(struct ath9k_htc_priv *priv)
+void ath_start_ani(struct ath9k_htc_priv *priv)
 {
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 	unsigned long timestamp = jiffies_to_msecs(jiffies);
@@ -724,7 +832,7 @@ void ath9k_ani_work(struct work_struct *work)
 	/* Long calibration runs independently of short calibration. */
 	if ((timestamp - common->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
 		longcal = true;
-		ath_print(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
+		ath_dbg(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
 		common->ani.longcal_timer = timestamp;
 	}
 
@@ -733,8 +841,8 @@ void ath9k_ani_work(struct work_struct *work)
 		if ((timestamp - common->ani.shortcal_timer) >=
 		    short_cal_interval) {
 			shortcal = true;
-			ath_print(common, ATH_DBG_ANI,
-				  "shortcal @%lu\n", jiffies);
+			ath_dbg(common, ATH_DBG_ANI,
+				"shortcal @%lu\n", jiffies);
 			common->ani.shortcal_timer = timestamp;
 			common->ani.resetcal_timer = timestamp;
 		}
@@ -788,317 +896,6 @@ set_timer:
 				     msecs_to_jiffies(cal_interval));
 }
 
-/*******/
-/* LED */
-/*******/
-
-static void ath9k_led_blink_work(struct work_struct *work)
-{
-	struct ath9k_htc_priv *priv = container_of(work, struct ath9k_htc_priv,
-						   ath9k_led_blink_work.work);
-
-	if (!(priv->op_flags & OP_LED_ASSOCIATED))
-		return;
-
-	if ((priv->led_on_duration == ATH_LED_ON_DURATION_IDLE) ||
-	    (priv->led_off_duration == ATH_LED_OFF_DURATION_IDLE))
-		ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 0);
-	else
-		ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin,
-				  (priv->op_flags & OP_LED_ON) ? 1 : 0);
-
-	ieee80211_queue_delayed_work(priv->hw,
-				     &priv->ath9k_led_blink_work,
-				     (priv->op_flags & OP_LED_ON) ?
-				     msecs_to_jiffies(priv->led_off_duration) :
-				     msecs_to_jiffies(priv->led_on_duration));
-
-	priv->led_on_duration = priv->led_on_cnt ?
-		max((ATH_LED_ON_DURATION_IDLE - priv->led_on_cnt), 25) :
-		ATH_LED_ON_DURATION_IDLE;
-	priv->led_off_duration = priv->led_off_cnt ?
-		max((ATH_LED_OFF_DURATION_IDLE - priv->led_off_cnt), 10) :
-		ATH_LED_OFF_DURATION_IDLE;
-	priv->led_on_cnt = priv->led_off_cnt = 0;
-
-	if (priv->op_flags & OP_LED_ON)
-		priv->op_flags &= ~OP_LED_ON;
-	else
-		priv->op_flags |= OP_LED_ON;
-}
-
-static void ath9k_led_brightness_work(struct work_struct *work)
-{
-	struct ath_led *led = container_of(work, struct ath_led,
-					   brightness_work.work);
-	struct ath9k_htc_priv *priv = led->priv;
-
-	switch (led->brightness) {
-	case LED_OFF:
-		if (led->led_type == ATH_LED_ASSOC ||
-		    led->led_type == ATH_LED_RADIO) {
-			ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin,
-					  (led->led_type == ATH_LED_RADIO));
-			priv->op_flags &= ~OP_LED_ASSOCIATED;
-			if (led->led_type == ATH_LED_RADIO)
-				priv->op_flags &= ~OP_LED_ON;
-		} else {
-			priv->led_off_cnt++;
-		}
-		break;
-	case LED_FULL:
-		if (led->led_type == ATH_LED_ASSOC) {
-			priv->op_flags |= OP_LED_ASSOCIATED;
-			ieee80211_queue_delayed_work(priv->hw,
-					     &priv->ath9k_led_blink_work, 0);
-		} else if (led->led_type == ATH_LED_RADIO) {
-			ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 0);
-			priv->op_flags |= OP_LED_ON;
-		} else {
-			priv->led_on_cnt++;
-		}
-		break;
-	default:
-		break;
-	}
-}
-
-static void ath9k_led_brightness(struct led_classdev *led_cdev,
-				 enum led_brightness brightness)
-{
-	struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev);
-	struct ath9k_htc_priv *priv = led->priv;
-
-	led->brightness = brightness;
-	if (!(priv->op_flags & OP_LED_DEINIT))
-		ieee80211_queue_delayed_work(priv->hw,
-					     &led->brightness_work, 0);
-}
-
-static void ath9k_led_stop_brightness(struct ath9k_htc_priv *priv)
-{
-	cancel_delayed_work_sync(&priv->radio_led.brightness_work);
-	cancel_delayed_work_sync(&priv->assoc_led.brightness_work);
-	cancel_delayed_work_sync(&priv->tx_led.brightness_work);
-	cancel_delayed_work_sync(&priv->rx_led.brightness_work);
-}
-
-static int ath9k_register_led(struct ath9k_htc_priv *priv, struct ath_led *led,
-			      char *trigger)
-{
-	int ret;
-
-	led->priv = priv;
-	led->led_cdev.name = led->name;
-	led->led_cdev.default_trigger = trigger;
-	led->led_cdev.brightness_set = ath9k_led_brightness;
-
-	ret = led_classdev_register(wiphy_dev(priv->hw->wiphy), &led->led_cdev);
-	if (ret)
-		ath_print(ath9k_hw_common(priv->ah), ATH_DBG_FATAL,
-			  "Failed to register led:%s", led->name);
-	else
-		led->registered = 1;
-
-	INIT_DELAYED_WORK(&led->brightness_work, ath9k_led_brightness_work);
-
-	return ret;
-}
-
-static void ath9k_unregister_led(struct ath_led *led)
-{
-	if (led->registered) {
-		led_classdev_unregister(&led->led_cdev);
-		led->registered = 0;
-	}
-}
-
-void ath9k_deinit_leds(struct ath9k_htc_priv *priv)
-{
-	priv->op_flags |= OP_LED_DEINIT;
-	ath9k_unregister_led(&priv->assoc_led);
-	priv->op_flags &= ~OP_LED_ASSOCIATED;
-	ath9k_unregister_led(&priv->tx_led);
-	ath9k_unregister_led(&priv->rx_led);
-	ath9k_unregister_led(&priv->radio_led);
-}
-
-void ath9k_init_leds(struct ath9k_htc_priv *priv)
-{
-	char *trigger;
-	int ret;
-
-	if (AR_SREV_9287(priv->ah))
-		priv->ah->led_pin = ATH_LED_PIN_9287;
-	else if (AR_SREV_9271(priv->ah))
-		priv->ah->led_pin = ATH_LED_PIN_9271;
-	else if (AR_DEVID_7010(priv->ah))
-		priv->ah->led_pin = ATH_LED_PIN_7010;
-	else
-		priv->ah->led_pin = ATH_LED_PIN_DEF;
-
-	/* Configure gpio 1 for output */
-	ath9k_hw_cfg_output(priv->ah, priv->ah->led_pin,
-			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-	/* LED off, active low */
-	ath9k_hw_set_gpio(priv->ah, priv->ah->led_pin, 1);
-
-	INIT_DELAYED_WORK(&priv->ath9k_led_blink_work, ath9k_led_blink_work);
-
-	trigger = ieee80211_get_radio_led_name(priv->hw);
-	snprintf(priv->radio_led.name, sizeof(priv->radio_led.name),
-		"ath9k-%s::radio", wiphy_name(priv->hw->wiphy));
-	ret = ath9k_register_led(priv, &priv->radio_led, trigger);
-	priv->radio_led.led_type = ATH_LED_RADIO;
-	if (ret)
-		goto fail;
-
-	trigger = ieee80211_get_assoc_led_name(priv->hw);
-	snprintf(priv->assoc_led.name, sizeof(priv->assoc_led.name),
-		"ath9k-%s::assoc", wiphy_name(priv->hw->wiphy));
-	ret = ath9k_register_led(priv, &priv->assoc_led, trigger);
-	priv->assoc_led.led_type = ATH_LED_ASSOC;
-	if (ret)
-		goto fail;
-
-	trigger = ieee80211_get_tx_led_name(priv->hw);
-	snprintf(priv->tx_led.name, sizeof(priv->tx_led.name),
-		"ath9k-%s::tx", wiphy_name(priv->hw->wiphy));
-	ret = ath9k_register_led(priv, &priv->tx_led, trigger);
-	priv->tx_led.led_type = ATH_LED_TX;
-	if (ret)
-		goto fail;
-
-	trigger = ieee80211_get_rx_led_name(priv->hw);
-	snprintf(priv->rx_led.name, sizeof(priv->rx_led.name),
-		"ath9k-%s::rx", wiphy_name(priv->hw->wiphy));
-	ret = ath9k_register_led(priv, &priv->rx_led, trigger);
-	priv->rx_led.led_type = ATH_LED_RX;
-	if (ret)
-		goto fail;
-
-	priv->op_flags &= ~OP_LED_DEINIT;
-
-	return;
-
-fail:
-	cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
-	ath9k_deinit_leds(priv);
-}
-
-/*******************/
-/*	Rfkill	   */
-/*******************/
-
-static bool ath_is_rfkill_set(struct ath9k_htc_priv *priv)
-{
-	return ath9k_hw_gpio_get(priv->ah, priv->ah->rfkill_gpio) ==
-		priv->ah->rfkill_polarity;
-}
-
-static void ath9k_htc_rfkill_poll_state(struct ieee80211_hw *hw)
-{
-	struct ath9k_htc_priv *priv = hw->priv;
-	bool blocked = !!ath_is_rfkill_set(priv);
-
-	wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
-}
-
-void ath9k_start_rfkill_poll(struct ath9k_htc_priv *priv)
-{
-	if (priv->ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		wiphy_rfkill_start_polling(priv->hw->wiphy);
-}
-
-static void ath9k_htc_radio_enable(struct ieee80211_hw *hw)
-{
-	struct ath9k_htc_priv *priv = hw->priv;
-	struct ath_hw *ah = priv->ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	int ret;
-	u8 cmd_rsp;
-
-	if (!ah->curchan)
-		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
-
-	/* Reset the HW */
-	ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
-	if (ret) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to reset hardware; reset status %d "
-			  "(freq %u MHz)\n", ret, ah->curchan->channel);
-	}
-
-	ath_update_txpow(priv);
-
-	/* Start RX */
-	WMI_CMD(WMI_START_RECV_CMDID);
-	ath9k_host_rx_init(priv);
-
-	/* Start TX */
-	htc_start(priv->htc);
-	spin_lock_bh(&priv->tx_lock);
-	priv->tx_queues_stop = false;
-	spin_unlock_bh(&priv->tx_lock);
-	ieee80211_wake_queues(hw);
-
-	WMI_CMD(WMI_ENABLE_INTR_CMDID);
-
-	/* Enable LED */
-	ath9k_hw_cfg_output(ah, ah->led_pin,
-			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
-	ath9k_hw_set_gpio(ah, ah->led_pin, 0);
-}
-
-static void ath9k_htc_radio_disable(struct ieee80211_hw *hw)
-{
-	struct ath9k_htc_priv *priv = hw->priv;
-	struct ath_hw *ah = priv->ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-	int ret;
-	u8 cmd_rsp;
-
-	ath9k_htc_ps_wakeup(priv);
-
-	/* Disable LED */
-	ath9k_hw_set_gpio(ah, ah->led_pin, 1);
-	ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
-
-	WMI_CMD(WMI_DISABLE_INTR_CMDID);
-
-	/* Stop TX */
-	ieee80211_stop_queues(hw);
-	htc_stop(priv->htc);
-	WMI_CMD(WMI_DRAIN_TXQ_ALL_CMDID);
-	skb_queue_purge(&priv->tx_queue);
-
-	/* Stop RX */
-	WMI_CMD(WMI_STOP_RECV_CMDID);
-
-	/*
-	 * The MIB counters have to be disabled here,
-	 * since the target doesn't do it.
-	 */
-	ath9k_hw_disable_mib_counters(ah);
-
-	if (!ah->curchan)
-		ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
-
-	/* Reset the HW */
-	ret = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
-	if (ret) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to reset hardware; reset status %d "
-			  "(freq %u MHz)\n", ret, ah->curchan->channel);
-	}
-
-	/* Disable the PHY */
-	ath9k_hw_phy_disable(ah);
-
-	ath9k_htc_ps_restore(priv);
-	ath9k_htc_setpower(priv, ATH9K_PM_FULL_SLEEP);
-}
-
 /**********************/
 /* mac80211 Callbacks */
 /**********************/
@@ -1124,15 +921,15 @@ static int ath9k_htc_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	ret = ath9k_htc_tx_start(priv, skb);
 	if (ret != 0) {
 		if (ret == -ENOMEM) {
-			ath_print(ath9k_hw_common(priv->ah), ATH_DBG_XMIT,
-				  "Stopping TX queues\n");
+			ath_dbg(ath9k_hw_common(priv->ah), ATH_DBG_XMIT,
+				"Stopping TX queues\n");
 			ieee80211_stop_queues(hw);
 			spin_lock_bh(&priv->tx_lock);
 			priv->tx_queues_stop = true;
 			spin_unlock_bh(&priv->tx_lock);
 		} else {
-			ath_print(ath9k_hw_common(priv->ah), ATH_DBG_XMIT,
-				  "Tx failed");
+			ath_dbg(ath9k_hw_common(priv->ah), ATH_DBG_XMIT,
+				"Tx failed\n");
 		}
 		goto fail_tx;
 	}
@@ -1158,9 +955,9 @@ static int ath9k_htc_start(struct ieee80211_hw *hw)
 
 	mutex_lock(&priv->mutex);
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "Starting driver with initial channel: %d MHz\n",
-		  curchan->center_freq);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"Starting driver with initial channel: %d MHz\n",
+		curchan->center_freq);
 
 	/* Ensure that HW is awake before flushing RX */
 	ath9k_htc_setpower(priv, ATH9K_PM_AWAKE);
@@ -1169,15 +966,12 @@ static int ath9k_htc_start(struct ieee80211_hw *hw)
 	/* setup initial channel */
 	init_channel = ath9k_cmn_get_curchannel(hw, ah);
 
-	/* Reset SERDES registers */
-	ath9k_hw_configpcipowersave(ah, 0, 0);
-
 	ath9k_hw_htc_resetinit(ah);
 	ret = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
 	if (ret) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to reset hardware; reset status %d "
-			  "(freq %u MHz)\n", ret, curchan->center_freq);
+		ath_err(common,
+			"Unable to reset hardware; reset status %d (freq %u MHz)\n",
+			ret, curchan->center_freq);
 		mutex_unlock(&priv->mutex);
 		return ret;
 	}
@@ -1220,19 +1014,20 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
 	int ret = 0;
 	u8 cmd_rsp;
 
+	/* Cancel all the running timers/work .. */
+	cancel_work_sync(&priv->fatal_work);
+	cancel_work_sync(&priv->ps_work);
+	cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
+	ath9k_led_stop_brightness(priv);
+
 	mutex_lock(&priv->mutex);
 
 	if (priv->op_flags & OP_INVALID) {
-		ath_print(common, ATH_DBG_ANY, "Device not present\n");
+		ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
 		mutex_unlock(&priv->mutex);
 		return;
 	}
 
-	/* Cancel all the running timers/work .. */
-	cancel_work_sync(&priv->ps_work);
-	cancel_delayed_work_sync(&priv->ath9k_led_blink_work);
-	ath9k_led_stop_brightness(priv);
-
 	ath9k_htc_ps_wakeup(priv);
 	htc_stop(priv->htc);
 	WMI_CMD(WMI_DISABLE_INTR_CMDID);
@@ -1243,11 +1038,10 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
 	/* Remove monitor interface here */
 	if (ah->opmode == NL80211_IFTYPE_MONITOR) {
 		if (ath9k_htc_remove_monitor_interface(priv))
-			ath_print(common, ATH_DBG_FATAL,
-				  "Unable to remove monitor interface\n");
+			ath_err(common, "Unable to remove monitor interface\n");
 		else
-			ath_print(common, ATH_DBG_CONFIG,
-				  "Monitor interface removed\n");
+			ath_dbg(common, ATH_DBG_CONFIG,
+				"Monitor interface removed\n");
 	}
 
 	if (ah->btcoex_hw.enabled) {
@@ -1258,13 +1052,12 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw)
 
 	ath9k_hw_phy_disable(ah);
 	ath9k_hw_disable(ah);
-	ath9k_hw_configpcipowersave(ah, 1, 1);
 	ath9k_htc_ps_restore(priv);
 	ath9k_htc_setpower(priv, ATH9K_PM_FULL_SLEEP);
 
 	priv->op_flags |= OP_INVALID;
 
-	ath_print(common, ATH_DBG_CONFIG, "Driver halt\n");
+	ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n");
 	mutex_unlock(&priv->mutex);
 }
 
@@ -1298,14 +1091,14 @@ static int ath9k_htc_add_interface(struct ieee80211_hw *hw,
 		hvif.opmode = cpu_to_be32(HTC_M_IBSS);
 		break;
 	default:
-		ath_print(common, ATH_DBG_FATAL,
+		ath_err(common,
 			"Interface type %d not yet supported\n", vif->type);
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "Attach a VIF of type: %d\n", vif->type);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"Attach a VIF of type: %d\n", vif->type);
 
 	priv->ah->opmode = vif->type;
 
@@ -1328,8 +1121,8 @@ static int ath9k_htc_add_interface(struct ieee80211_hw *hw,
 
 	ret = ath9k_htc_update_cap_target(priv);
 	if (ret)
-		ath_print(common, ATH_DBG_CONFIG, "Failed to update"
-			  " capability in target \n");
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"Failed to update capability in target\n");
 
 	priv->vif = vif;
 out:
@@ -1349,7 +1142,7 @@ static void ath9k_htc_remove_interface(struct ieee80211_hw *hw,
 	int ret = 0;
 	u8 cmd_rsp;
 
-	ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
+	ath_dbg(common, ATH_DBG_CONFIG, "Detach Interface\n");
 
 	mutex_lock(&priv->mutex);
 	ath9k_htc_ps_wakeup(priv);
@@ -1386,8 +1179,8 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 		mutex_unlock(&priv->htc_pm_lock);
 
 		if (enable_radio) {
-			ath_print(common, ATH_DBG_CONFIG,
-				  "not-idle: enabling radio\n");
+			ath_dbg(common, ATH_DBG_CONFIG,
+				"not-idle: enabling radio\n");
 			ath9k_htc_setpower(priv, ATH9K_PM_AWAKE);
 			ath9k_htc_radio_enable(hw);
 		}
@@ -1397,19 +1190,21 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 		struct ieee80211_channel *curchan = hw->conf.channel;
 		int pos = curchan->hw_value;
 
-		ath_print(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
-			  curchan->center_freq);
+		ath_dbg(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
+			curchan->center_freq);
 
-		ath9k_cmn_update_ichannel(hw, &priv->ah->channels[pos]);
+		ath9k_cmn_update_ichannel(&priv->ah->channels[pos],
+					  hw->conf.channel,
+					  hw->conf.channel_type);
 
 		if (ath9k_htc_set_channel(priv, hw, &priv->ah->channels[pos]) < 0) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Unable to set channel\n");
+			ath_err(common, "Unable to set channel\n");
 			mutex_unlock(&priv->mutex);
 			return -EINVAL;
 		}
 
 	}
+
 	if (changed & IEEE80211_CONF_CHANGE_PS) {
 		if (conf->flags & IEEE80211_CONF_PS) {
 			ath9k_htc_setpower(priv, ATH9K_PM_NETWORK_SLEEP);
@@ -1421,14 +1216,18 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 		}
 	}
 
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		priv->txpowlimit = 2 * conf->power_level;
+		ath_update_txpow(priv);
+	}
+
 	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
 		if (conf->flags & IEEE80211_CONF_MONITOR) {
 			if (ath9k_htc_add_monitor_interface(priv))
-				ath_print(common, ATH_DBG_FATAL,
-					  "Failed to set monitor mode\n");
+				ath_err(common, "Failed to set monitor mode\n");
 			else
-				ath_print(common, ATH_DBG_CONFIG,
-					  "HW opmode set to Monitor mode\n");
+				ath_dbg(common, ATH_DBG_CONFIG,
+					"HW opmode set to Monitor mode\n");
 		}
 	}
 
@@ -1440,8 +1239,8 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed)
 		}
 		mutex_unlock(&priv->htc_pm_lock);
 
-		ath_print(common, ATH_DBG_CONFIG,
-			  "idle: disabling radio\n");
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"idle: disabling radio\n");
 		ath9k_htc_radio_disable(hw);
 	}
 
@@ -1478,8 +1277,8 @@ static void ath9k_htc_configure_filter(struct ieee80211_hw *hw,
 	rfilt = ath9k_htc_calcrxfilter(priv);
 	ath9k_hw_setrxfilter(priv->ah, rfilt);
 
-	ath_print(ath9k_hw_common(priv->ah), ATH_DBG_CONFIG,
-		  "Set HW RX filter: 0x%x\n", rfilt);
+	ath_dbg(ath9k_hw_common(priv->ah), ATH_DBG_CONFIG,
+		"Set HW RX filter: 0x%x\n", rfilt);
 
 	ath9k_htc_ps_restore(priv);
 	mutex_unlock(&priv->mutex);
@@ -1542,15 +1341,14 @@ static int ath9k_htc_conf_tx(struct ieee80211_hw *hw, u16 queue,
 
 	qnum = get_hw_qnum(queue, priv->hwq_map);
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "Configure tx [queue/hwq] [%d/%d],  "
-		  "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
-		  queue, qnum, params->aifs, params->cw_min,
-		  params->cw_max, params->txop);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"Configure tx [queue/hwq] [%d/%d],  aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
+		queue, qnum, params->aifs, params->cw_min,
+		params->cw_max, params->txop);
 
 	ret = ath_htc_txq_update(priv, qnum, &qi);
 	if (ret) {
-		ath_print(common, ATH_DBG_FATAL, "TXQ Update failed\n");
+		ath_err(common, "TXQ Update failed\n");
 		goto out;
 	}
 
@@ -1578,7 +1376,7 @@ static int ath9k_htc_set_key(struct ieee80211_hw *hw,
 		return -ENOSPC;
 
 	mutex_lock(&priv->mutex);
-	ath_print(common, ATH_DBG_CONFIG, "Set HW Key\n");
+	ath_dbg(common, ATH_DBG_CONFIG, "Set HW Key\n");
 	ath9k_htc_ps_wakeup(priv);
 
 	switch (cmd) {
@@ -1624,7 +1422,7 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_ASSOC) {
 		common->curaid = bss_conf->assoc ?
 				 bss_conf->aid : 0;
-		ath_print(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
+		ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
 			bss_conf->assoc);
 
 		if (bss_conf->assoc) {
@@ -1641,9 +1439,9 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
 		ath9k_hw_write_associd(ah);
 
-		ath_print(common, ATH_DBG_CONFIG,
-			  "BSSID: %pM aid: 0x%x\n",
-			  common->curbssid, common->curaid);
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"BSSID: %pM aid: 0x%x\n",
+			common->curbssid, common->curaid);
 	}
 
 	if ((changed & BSS_CHANGED_BEACON_INT) ||
@@ -1661,8 +1459,8 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
-		ath_print(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
-			  bss_conf->use_short_preamble);
+		ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
+			bss_conf->use_short_preamble);
 		if (bss_conf->use_short_preamble)
 			priv->op_flags |= OP_PREAMBLE_SHORT;
 		else
@@ -1670,8 +1468,8 @@ static void ath9k_htc_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
-		ath_print(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
-			  bss_conf->use_cts_prot);
+		ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
+			bss_conf->use_cts_prot);
 		if (bss_conf->use_cts_prot &&
 		    hw->conf.channel->band != IEEE80211_BAND_5GHZ)
 			priv->op_flags |= OP_PROTECT_ENABLE;
@@ -1762,8 +1560,7 @@ static int ath9k_htc_ampdu_action(struct ieee80211_hw *hw,
 		spin_unlock_bh(&priv->tx_lock);
 		break;
 	default:
-		ath_print(ath9k_hw_common(priv->ah), ATH_DBG_FATAL,
-			  "Unknown AMPDU action\n");
+		ath_err(ath9k_hw_common(priv->ah), "Unknown AMPDU action\n");
 	}
 
 	return ret;
@@ -1792,7 +1589,6 @@ static void ath9k_htc_sw_scan_complete(struct ieee80211_hw *hw)
 	spin_lock_bh(&priv->beacon_lock);
 	priv->op_flags &= ~OP_SCANNING;
 	spin_unlock_bh(&priv->beacon_lock);
-	priv->op_flags |= OP_FULL_RESET;
 	if (priv->op_flags & OP_ASSOCIATED) {
 		ath9k_htc_beacon_config(priv, priv->vif);
 		ath_start_ani(priv);
diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
index 3d19b5bc937..33f36029fa4 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c
@@ -20,8 +20,15 @@
 /* TX */
 /******/
 
+static const int subtype_txq_to_hwq[] = {
+	[WME_AC_BE] = ATH_TXQ_AC_BE,
+	[WME_AC_BK] = ATH_TXQ_AC_BK,
+	[WME_AC_VI] = ATH_TXQ_AC_VI,
+	[WME_AC_VO] = ATH_TXQ_AC_VO,
+};
+
 #define ATH9K_HTC_INIT_TXQ(subtype) do {			\
-		qi.tqi_subtype = subtype;			\
+		qi.tqi_subtype = subtype_txq_to_hwq[subtype];	\
 		qi.tqi_aifs = ATH9K_TXQ_USEDEFAULT;		\
 		qi.tqi_cwmin = ATH9K_TXQ_USEDEFAULT;		\
 		qi.tqi_cwmax = ATH9K_TXQ_USEDEFAULT;		\
@@ -62,8 +69,8 @@ int ath_htc_txq_update(struct ath9k_htc_priv *priv, int qnum,
 	qi.tqi_readyTime = qinfo->tqi_readyTime;
 
 	if (!ath9k_hw_set_txq_props(ah, qnum, &qi)) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-			  "Unable to update hardware queue %u!\n", qnum);
+		ath_err(ath9k_hw_common(ah),
+			"Unable to update hardware queue %u!\n", qnum);
 		error = -EIO;
 	} else {
 		ath9k_hw_resettxqueue(ah, qnum);
@@ -121,7 +128,7 @@ int ath9k_htc_tx_start(struct ath9k_htc_priv *priv, struct sk_buff *skb)
 			tx_hdr.data_type = ATH9K_HTC_NORMAL;
 		}
 
-		if (ieee80211_is_data(fc)) {
+		if (ieee80211_is_data_qos(fc)) {
 			qc = ieee80211_get_qos_ctl(hdr);
 			tx_hdr.tidno = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
 		}
@@ -244,7 +251,7 @@ void ath9k_tx_tasklet(unsigned long data)
 				ista = (struct ath9k_htc_sta *)sta->drv_priv;
 
 				if (ath9k_htc_check_tx_aggr(priv, ista, tid)) {
-					ieee80211_start_tx_ba_session(sta, tid);
+					ieee80211_start_tx_ba_session(sta, tid, 0);
 					spin_lock_bh(&priv->tx_lock);
 					ista->tid_state[tid] = AGGR_PROGRESS;
 					spin_unlock_bh(&priv->tx_lock);
@@ -263,8 +270,8 @@ void ath9k_tx_tasklet(unsigned long data)
 	if (priv->tx_queues_stop) {
 		priv->tx_queues_stop = false;
 		spin_unlock_bh(&priv->tx_lock);
-		ath_print(ath9k_hw_common(priv->ah), ATH_DBG_XMIT,
-			  "Waking up TX queues\n");
+		ath_dbg(ath9k_hw_common(priv->ah), ATH_DBG_XMIT,
+			"Waking up TX queues\n");
 		ieee80211_wake_queues(priv->hw);
 		return;
 	}
@@ -289,8 +296,7 @@ void ath9k_htc_txep(void *drv_priv, struct sk_buff *skb,
 		   (ep_id == priv->data_vo_ep)) {
 		skb_pull(skb, sizeof(struct tx_frame_hdr));
 	} else {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unsupported TX EPID: %d\n", ep_id);
+		ath_err(common, "Unsupported TX EPID: %d\n", ep_id);
 		dev_kfree_skb_any(skb);
 		return;
 	}
@@ -330,9 +336,8 @@ bool ath9k_htc_txq_setup(struct ath9k_htc_priv *priv, int subtype)
 		return false;
 
 	if (qnum >= ARRAY_SIZE(priv->hwq_map)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "qnum %u out of range, max %u!\n",
-			  qnum, (unsigned int)ARRAY_SIZE(priv->hwq_map));
+		ath_err(common, "qnum %u out of range, max %zu!\n",
+			qnum, ARRAY_SIZE(priv->hwq_map));
 		ath9k_hw_releasetxqueue(ah, qnum);
 		return false;
 	}
@@ -483,8 +488,7 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 	__le16 fc;
 
 	if (skb->len <= HTC_RX_FRAME_HEADER_SIZE) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Corrupted RX frame, dropping\n");
+		ath_err(common, "Corrupted RX frame, dropping\n");
 		goto rx_next;
 	}
 
@@ -492,10 +496,9 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv,
 
 	if (be16_to_cpu(rxstatus->rs_datalen) -
 	    (skb->len - HTC_RX_FRAME_HEADER_SIZE) != 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Corrupted RX data len, dropping "
-			  "(dlen: %d, skblen: %d)\n",
-			  rxstatus->rs_datalen, skb->len);
+		ath_err(common,
+			"Corrupted RX data len, dropping (dlen: %d, skblen: %d)\n",
+			rxstatus->rs_datalen, skb->len);
 		goto rx_next;
 	}
 
@@ -678,8 +681,8 @@ void ath9k_htc_rxep(void *drv_priv, struct sk_buff *skb,
 	spin_unlock(&priv->rx.rxbuflock);
 
 	if (rxbuf == NULL) {
-		ath_print(common, ATH_DBG_ANY,
-			  "No free RX buffer\n");
+		ath_dbg(common, ATH_DBG_ANY,
+			"No free RX buffer\n");
 		goto err;
 	}
 
@@ -721,8 +724,7 @@ int ath9k_rx_init(struct ath9k_htc_priv *priv)
 	for (i = 0; i < ATH9K_HTC_RXBUF; i++) {
 		rxbuf = kzalloc(sizeof(struct ath9k_htc_rxbuf), GFP_KERNEL);
 		if (rxbuf == NULL) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Unable to allocate RX buffers\n");
+			ath_err(common, "Unable to allocate RX buffers\n");
 			goto err;
 		}
 		list_add_tail(&rxbuf->list, &priv->rx.rxbuf);
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index 861ec926930..c41ab8c3016 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -462,9 +462,10 @@ void ath9k_htc_hw_free(struct htc_target *htc)
 }
 
 int ath9k_htc_hw_init(struct htc_target *target,
-		      struct device *dev, u16 devid, char *product)
+		      struct device *dev, u16 devid,
+		      char *product, u32 drv_info)
 {
-	if (ath9k_htc_probe_device(target, dev, devid, product)) {
+	if (ath9k_htc_probe_device(target, dev, devid, product, drv_info)) {
 		printk(KERN_ERR "Failed to initialize the device\n");
 		return -ENODEV;
 	}
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.h b/drivers/net/wireless/ath/ath9k/htc_hst.h
index 07b6509d589..ecd018798c4 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.h
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.h
@@ -77,20 +77,6 @@ struct htc_config_pipe_msg {
 	u8 credits;
 } __packed;
 
-struct htc_packet {
-	void *pktcontext;
-	u8 *buf;
-	u8 *buf_payload;
-	u32 buflen;
-	u32 payload_len;
-
-	int endpoint;
-	int status;
-
-	void *context;
-	u32 reserved;
-};
-
 struct htc_ep_callbacks {
 	void *priv;
 	void (*tx) (void *, struct sk_buff *, enum htc_endpoint_id, bool txok);
@@ -123,11 +109,6 @@ struct htc_endpoint {
 #define HTC_CONTROL_BUFFER_SIZE	\
 	(HTC_MAX_CONTROL_MESSAGE_LENGTH + sizeof(struct htc_frame_hdr))
 
-struct htc_control_buf {
-	struct htc_packet htc_pkt;
-	u8 buf[HTC_CONTROL_BUFFER_SIZE];
-};
-
 #define HTC_OP_START_WAIT           BIT(0)
 #define HTC_OP_CONFIG_PIPE_CREDITS  BIT(1)
 
@@ -239,7 +220,8 @@ struct htc_target *ath9k_htc_hw_alloc(void *hif_handle,
 				      struct device *dev);
 void ath9k_htc_hw_free(struct htc_target *htc);
 int ath9k_htc_hw_init(struct htc_target *target,
-		      struct device *dev, u16 devid, char *product);
+		      struct device *dev, u16 devid, char *product,
+		      u32 drv_info);
 void ath9k_htc_hw_deinit(struct htc_target *target, bool hot_unplug);
 
 #endif /* HTC_HST_H */
diff --git a/drivers/net/wireless/ath/ath9k/hw-ops.h b/drivers/net/wireless/ath/ath9k/hw-ops.h
index 0a4ad348b69..c8f254fe0f0 100644
--- a/drivers/net/wireless/ath/ath9k/hw-ops.h
+++ b/drivers/net/wireless/ath/ath9k/hw-ops.h
@@ -223,11 +223,6 @@ static inline void ath9k_hw_rfbus_done(struct ath_hw *ah)
 	return ath9k_hw_private_ops(ah)->rfbus_done(ah);
 }
 
-static inline void ath9k_enable_rfkill(struct ath_hw *ah)
-{
-	return ath9k_hw_private_ops(ah)->enable_rfkill(ah);
-}
-
 static inline void ath9k_hw_restore_chainmask(struct ath_hw *ah)
 {
 	if (!ath9k_hw_private_ops(ah)->restore_chainmask)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index cc13ee11782..fde978665e0 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -54,13 +54,6 @@ static void ath9k_hw_init_mode_regs(struct ath_hw *ah)
 	ath9k_hw_private_ops(ah)->init_mode_regs(ah);
 }
 
-static bool ath9k_hw_macversion_supported(struct ath_hw *ah)
-{
-	struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah);
-
-	return priv_ops->macversion_supported(ah->hw_version.macVersion);
-}
-
 static u32 ath9k_hw_compute_pll_control(struct ath_hw *ah,
 					struct ath9k_channel *chan)
 {
@@ -129,9 +122,9 @@ bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
 		udelay(AH_TIME_QUANTUM);
 	}
 
-	ath_print(ath9k_hw_common(ah), ATH_DBG_ANY,
-		  "timeout (%d us) on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
-		  timeout, reg, REG_READ(ah, reg), mask, val);
+	ath_dbg(ath9k_hw_common(ah), ATH_DBG_ANY,
+		"timeout (%d us) on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
+		timeout, reg, REG_READ(ah, reg), mask, val);
 
 	return false;
 }
@@ -211,8 +204,8 @@ u16 ath9k_hw_computetxtime(struct ath_hw *ah,
 		}
 		break;
 	default:
-		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-			  "Unknown phy %u (rate ix %u)\n", phy, rateix);
+		ath_err(ath9k_hw_common(ah),
+			"Unknown phy %u (rate ix %u)\n", phy, rateix);
 		txTime = 0;
 		break;
 	}
@@ -284,11 +277,9 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
 
 static void ath9k_hw_disablepcie(struct ath_hw *ah)
 {
-	if (AR_SREV_9100(ah))
+	if (!AR_SREV_5416(ah))
 		return;
 
-	ENABLE_REGWRITE_BUFFER(ah);
-
 	REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
 	REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
 	REG_WRITE(ah, AR_PCIE_SERDES, 0x28000029);
@@ -300,8 +291,6 @@ static void ath9k_hw_disablepcie(struct ath_hw *ah)
 	REG_WRITE(ah, AR_PCIE_SERDES, 0x000e1007);
 
 	REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
-
-	REGWRITE_BUFFER_FLUSH(ah);
 }
 
 /* This should work for all families including legacy */
@@ -310,10 +299,9 @@ static bool ath9k_hw_chip_test(struct ath_hw *ah)
 	struct ath_common *common = ath9k_hw_common(ah);
 	u32 regAddr[2] = { AR_STA_ID0 };
 	u32 regHold[2];
-	u32 patternData[4] = { 0x55555555,
-			       0xaaaaaaaa,
-			       0x66666666,
-			       0x99999999 };
+	static const u32 patternData[4] = {
+		0x55555555, 0xaaaaaaaa, 0x66666666, 0x99999999
+	};
 	int i, j, loop_max;
 
 	if (!AR_SREV_9300_20_OR_LATER(ah)) {
@@ -332,11 +320,9 @@ static bool ath9k_hw_chip_test(struct ath_hw *ah)
 			REG_WRITE(ah, addr, wrData);
 			rdData = REG_READ(ah, addr);
 			if (rdData != wrData) {
-				ath_print(common, ATH_DBG_FATAL,
-					  "address test failed "
-					  "addr: 0x%08x - wr:0x%08x != "
-					  "rd:0x%08x\n",
-					  addr, wrData, rdData);
+				ath_err(common,
+					"address test failed addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
+					addr, wrData, rdData);
 				return false;
 			}
 		}
@@ -345,11 +331,9 @@ static bool ath9k_hw_chip_test(struct ath_hw *ah)
 			REG_WRITE(ah, addr, wrData);
 			rdData = REG_READ(ah, addr);
 			if (wrData != rdData) {
-				ath_print(common, ATH_DBG_FATAL,
-					  "address test failed "
-					  "addr: 0x%08x - wr:0x%08x != "
-					  "rd:0x%08x\n",
-					  addr, wrData, rdData);
+				ath_err(common,
+					"address test failed addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
+					addr, wrData, rdData);
 				return false;
 			}
 		}
@@ -419,17 +403,12 @@ static void ath9k_hw_init_defaults(struct ath_hw *ah)
 	ah->hw_version.magic = AR5416_MAGIC;
 	ah->hw_version.subvendorid = 0;
 
-	ah->ah_flags = 0;
-	if (!AR_SREV_9100(ah))
-		ah->ah_flags = AH_USE_EEPROM;
-
 	ah->atim_window = 0;
 	ah->sta_id1_defaults =
 		AR_STA_ID1_CRPT_MIC_ENABLE |
 		AR_STA_ID1_MCAST_KSRCH;
-	ah->beacon_interval = 100;
 	ah->enable_32kHz_clock = DONT_USE_32KHZ;
-	ah->slottime = (u32) -1;
+	ah->slottime = 20;
 	ah->globaltxtimeout = (u32) -1;
 	ah->power_mode = ATH9K_PM_UNDEFINED;
 }
@@ -440,7 +419,7 @@ static int ath9k_hw_init_macaddr(struct ath_hw *ah)
 	u32 sum;
 	int i;
 	u16 eeval;
-	u32 EEP_MAC[] = { EEP_MAC_LSW, EEP_MAC_MID, EEP_MAC_MSW };
+	static const u32 EEP_MAC[] = { EEP_MAC_LSW, EEP_MAC_MID, EEP_MAC_MSW };
 
 	sum = 0;
 	for (i = 0; i < 3; i++) {
@@ -474,16 +453,16 @@ static int ath9k_hw_post_init(struct ath_hw *ah)
 	if (ecode != 0)
 		return ecode;
 
-	ath_print(ath9k_hw_common(ah), ATH_DBG_CONFIG,
-		  "Eeprom VER: %d, REV: %d\n",
-		  ah->eep_ops->get_eeprom_ver(ah),
-		  ah->eep_ops->get_eeprom_rev(ah));
+	ath_dbg(ath9k_hw_common(ah), ATH_DBG_CONFIG,
+		"Eeprom VER: %d, REV: %d\n",
+		ah->eep_ops->get_eeprom_ver(ah),
+		ah->eep_ops->get_eeprom_rev(ah));
 
 	ecode = ath9k_hw_rf_alloc_ext_banks(ah);
 	if (ecode) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-			  "Failed allocating banks for "
-			  "external radio\n");
+		ath_err(ath9k_hw_common(ah),
+			"Failed allocating banks for external radio\n");
+		ath9k_hw_rf_free_ext_banks(ah);
 		return ecode;
 	}
 
@@ -513,8 +492,7 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 		ah->hw_version.macVersion = AR_SREV_VERSION_9100;
 
 	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Couldn't reset chip\n");
+		ath_err(common, "Couldn't reset chip\n");
 		return -EIO;
 	}
 
@@ -524,7 +502,7 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 	ath9k_hw_attach_ops(ah);
 
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) {
-		ath_print(common, ATH_DBG_FATAL, "Couldn't wakeup chip\n");
+		ath_err(common, "Couldn't wakeup chip\n");
 		return -EIO;
 	}
 
@@ -540,7 +518,7 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 		}
 	}
 
-	ath_print(common, ATH_DBG_RESET, "serialize_regmode is %d\n",
+	ath_dbg(common, ATH_DBG_RESET, "serialize_regmode is %d\n",
 		ah->config.serialize_regmode);
 
 	if (AR_SREV_9285(ah) || AR_SREV_9271(ah))
@@ -548,11 +526,22 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 	else
 		ah->config.max_txtrig_level = MAX_TX_FIFO_THRESHOLD;
 
-	if (!ath9k_hw_macversion_supported(ah)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Mac Chip Rev 0x%02x.%x is not supported by "
-			  "this driver\n", ah->hw_version.macVersion,
-			  ah->hw_version.macRev);
+	switch (ah->hw_version.macVersion) {
+	case AR_SREV_VERSION_5416_PCI:
+	case AR_SREV_VERSION_5416_PCIE:
+	case AR_SREV_VERSION_9160:
+	case AR_SREV_VERSION_9100:
+	case AR_SREV_VERSION_9280:
+	case AR_SREV_VERSION_9285:
+	case AR_SREV_VERSION_9287:
+	case AR_SREV_VERSION_9271:
+	case AR_SREV_VERSION_9300:
+	case AR_SREV_VERSION_9485:
+		break;
+	default:
+		ath_err(common,
+			"Mac Chip Rev 0x%02x.%x is not supported by this driver\n",
+			ah->hw_version.macVersion, ah->hw_version.macRev);
 		return -EOPNOTSUPP;
 	}
 
@@ -598,8 +587,7 @@ static int __ath9k_hw_init(struct ath_hw *ah)
 
 	r = ath9k_hw_init_macaddr(ah);
 	if (r) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Failed to initialize MAC address\n");
+		ath_err(common, "Failed to initialize MAC address\n");
 		return r;
 	}
 
@@ -633,21 +621,21 @@ int ath9k_hw_init(struct ath_hw *ah)
 	case AR9287_DEVID_PCIE:
 	case AR2427_DEVID_PCIE:
 	case AR9300_DEVID_PCIE:
+	case AR9300_DEVID_AR9485_PCIE:
 		break;
 	default:
 		if (common->bus_ops->ath_bus_type == ATH_USB)
 			break;
-		ath_print(common, ATH_DBG_FATAL,
-			  "Hardware device ID 0x%04x not supported\n",
-			  ah->hw_version.devid);
+		ath_err(common, "Hardware device ID 0x%04x not supported\n",
+			ah->hw_version.devid);
 		return -EOPNOTSUPP;
 	}
 
 	ret = __ath9k_hw_init(ah);
 	if (ret) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to initialize hardware; "
-			  "initialization status: %d\n", ret);
+		ath_err(common,
+			"Unable to initialize hardware; initialization status: %d\n",
+			ret);
 		return ret;
 	}
 
@@ -679,7 +667,12 @@ static void ath9k_hw_init_qos(struct ath_hw *ah)
 static void ath9k_hw_init_pll(struct ath_hw *ah,
 			      struct ath9k_channel *chan)
 {
-	u32 pll = ath9k_hw_compute_pll_control(ah, chan);
+	u32 pll;
+
+	if (AR_SREV_9485(ah))
+		REG_WRITE(ah, AR_RTC_PLL_CONTROL2, 0x886666);
+
+	pll = ath9k_hw_compute_pll_control(ah, chan);
 
 	REG_WRITE(ah, AR_RTC_PLL_CONTROL, pll);
 
@@ -771,8 +764,8 @@ static void ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
 static bool ath9k_hw_set_global_txtimeout(struct ath_hw *ah, u32 tu)
 {
 	if (tu > 0xFFFF) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_XMIT,
-			  "bad global tx timeout %u\n", tu);
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_XMIT,
+			"bad global tx timeout %u\n", tu);
 		ah->globaltxtimeout = (u32) -1;
 		return false;
 	} else {
@@ -789,8 +782,8 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
 	int slottime;
 	int sifstime;
 
-	ath_print(ath9k_hw_common(ah), ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
-		  ah->misc_mode);
+	ath_dbg(ath9k_hw_common(ah), ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
+		ah->misc_mode);
 
 	if (ah->misc_mode != 0)
 		REG_WRITE(ah, AR_PCU_MISC,
@@ -815,7 +808,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
 	if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ)
 		acktimeout += 64 - sifstime - ah->slottime;
 
-	ath9k_hw_setslottime(ah, slottime);
+	ath9k_hw_setslottime(ah, ah->slottime);
 	ath9k_hw_set_ack_timeout(ah, acktimeout);
 	ath9k_hw_set_cts_timeout(ah, acktimeout);
 	if (ah->globaltxtimeout != (u32) -1)
@@ -952,9 +945,12 @@ static void ath9k_hw_set_operating_mode(struct ath_hw *ah, int opmode)
 		REG_SET_BIT(ah, AR_CFG, AR_CFG_AP_ADHOC_INDICATION);
 		break;
 	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_MONITOR:
 		REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
 		break;
+	default:
+		if (ah->is_monitoring)
+			REG_WRITE(ah, AR_STA_ID1, val | AR_STA_ID1_KSRCH_MODE);
+		break;
 	}
 }
 
@@ -1030,8 +1026,8 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type)
 
 	REG_WRITE(ah, AR_RTC_RC, 0);
 	if (!ath9k_hw_wait(ah, AR_RTC_RC, AR_RTC_RC_M, 0, AH_WAIT_TIMEOUT)) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
-			  "RTC stuck in MAC reset\n");
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_RESET,
+			"RTC stuck in MAC reset\n");
 		return false;
 	}
 
@@ -1077,8 +1073,8 @@ static bool ath9k_hw_set_reset_power_on(struct ath_hw *ah)
 			   AR_RTC_STATUS_M,
 			   AR_RTC_STATUS_ON,
 			   AH_WAIT_TIMEOUT)) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
-			  "RTC not waking up\n");
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_RESET,
+			"RTC not waking up\n");
 		return false;
 	}
 
@@ -1138,16 +1134,14 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 
 	for (qnum = 0; qnum < AR_NUM_QCU; qnum++) {
 		if (ath9k_hw_numtxpending(ah, qnum)) {
-			ath_print(common, ATH_DBG_QUEUE,
-				  "Transmit frames pending on "
-				  "queue %d\n", qnum);
+			ath_dbg(common, ATH_DBG_QUEUE,
+				"Transmit frames pending on queue %d\n", qnum);
 			return false;
 		}
 	}
 
 	if (!ath9k_hw_rfbus_req(ah)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Could not kill baseband RX\n");
+		ath_err(common, "Could not kill baseband RX\n");
 		return false;
 	}
 
@@ -1155,8 +1149,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 
 	r = ath9k_hw_rf_set_freq(ah, chan);
 	if (r) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Failed to set channel\n");
+		ath_err(common, "Failed to set channel\n");
 		return false;
 	}
 	ath9k_hw_set_clockrate(ah);
@@ -1166,7 +1159,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah,
 			     channel->max_antenna_gain * 2,
 			     channel->max_power * 2,
 			     min((u32) MAX_RATE_POWER,
-			     (u32) regulatory->power_limit));
+			     (u32) regulatory->power_limit), false);
 
 	ath9k_hw_rfbus_done(ah);
 
@@ -1223,7 +1216,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	if (!ah->chip_fullsleep) {
 		ath9k_hw_abortpcurecv(ah);
 		if (!ath9k_hw_stopdmarecv(ah)) {
-			ath_print(common, ATH_DBG_XMIT,
+			ath_dbg(common, ATH_DBG_XMIT,
 				"Failed to stop receive dma\n");
 			bChannelChange = false;
 		}
@@ -1279,6 +1272,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 
 	ath9k_hw_mark_phy_inactive(ah);
 
+	ah->paprd_table_write_done = false;
+
 	/* Only required on the first reset */
 	if (AR_SREV_9271(ah) && ah->htc_reset_init) {
 		REG_WRITE(ah,
@@ -1288,7 +1283,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	}
 
 	if (!ath9k_hw_chip_reset(ah, chan)) {
-		ath_print(common, ATH_DBG_FATAL, "Chip reset failed\n");
+		ath_err(common, "Chip reset failed\n");
 		return -EINVAL;
 	}
 
@@ -1390,7 +1385,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 	ath9k_hw_init_qos(ah);
 
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_RFSILENT)
-		ath9k_enable_rfkill(ah);
+		ath9k_hw_cfg_gpio_input(ah, ah->rfkill_gpio);
 
 	ath9k_hw_init_global_settings(ah);
 
@@ -1435,13 +1430,13 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		u32 mask;
 		mask = REG_READ(ah, AR_CFG);
 		if (mask & (AR_CFG_SWRB | AR_CFG_SWTB | AR_CFG_SWRG)) {
-			ath_print(common, ATH_DBG_RESET,
+			ath_dbg(common, ATH_DBG_RESET,
 				"CFG Byte Swap Set 0x%x\n", mask);
 		} else {
 			mask =
 				INIT_CONFIG_STATUS | AR_CFG_SWRB | AR_CFG_SWTB;
 			REG_WRITE(ah, AR_CFG, mask);
-			ath_print(common, ATH_DBG_RESET,
+			ath_dbg(common, ATH_DBG_RESET,
 				"Setting CFG 0x%x\n", REG_READ(ah, AR_CFG));
 		}
 	} else {
@@ -1569,9 +1564,9 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah, int setChip)
 				    AR_RTC_FORCE_WAKE_EN);
 		}
 		if (i == 0) {
-			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-				  "Failed to wakeup in %uus\n",
-				  POWER_UP_TIME / 20);
+			ath_err(ath9k_hw_common(ah),
+				"Failed to wakeup in %uus\n",
+				POWER_UP_TIME / 20);
 			return false;
 		}
 	}
@@ -1595,8 +1590,8 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 	if (ah->power_mode == mode)
 		return status;
 
-	ath_print(common, ATH_DBG_RESET, "%s -> %s\n",
-		  modes[ah->power_mode], modes[mode]);
+	ath_dbg(common, ATH_DBG_RESET, "%s -> %s\n",
+		modes[ah->power_mode], modes[mode]);
 
 	switch (mode) {
 	case ATH9K_PM_AWAKE:
@@ -1610,12 +1605,20 @@ bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 		ath9k_set_power_network_sleep(ah, setChip);
 		break;
 	default:
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unknown power mode %u\n", mode);
+		ath_err(common, "Unknown power mode %u\n", mode);
 		return false;
 	}
 	ah->power_mode = mode;
 
+	/*
+	 * XXX: If this warning never comes up after a while then
+	 * simply keep the ATH_DBG_WARN_ON_ONCE() but make
+	 * ath9k_hw_setpower() return type void.
+	 */
+
+	if (!(ah->ah_flags & AH_UNPLUGGED))
+		ATH_DBG_WARN_ON_ONCE(!status);
+
 	return status;
 }
 EXPORT_SYMBOL(ath9k_hw_setpower);
@@ -1628,18 +1631,9 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period)
 {
 	int flags = 0;
 
-	ah->beacon_interval = beacon_period;
-
 	ENABLE_REGWRITE_BUFFER(ah);
 
 	switch (ah->opmode) {
-	case NL80211_IFTYPE_STATION:
-	case NL80211_IFTYPE_MONITOR:
-		REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(next_beacon));
-		REG_WRITE(ah, AR_NEXT_DMA_BEACON_ALERT, 0xffff);
-		REG_WRITE(ah, AR_NEXT_SWBA, 0x7ffff);
-		flags |= AR_TBTT_TIMER_EN;
-		break;
 	case NL80211_IFTYPE_ADHOC:
 	case NL80211_IFTYPE_MESH_POINT:
 		REG_SET_BIT(ah, AR_TXCFG,
@@ -1663,9 +1657,9 @@ void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period)
 			AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN;
 		break;
 	default:
-		ath_print(ath9k_hw_common(ah), ATH_DBG_BEACON,
-			  "%s: unsupported opmode: %d\n",
-			  __func__, ah->opmode);
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_BEACON,
+			"%s: unsupported opmode: %d\n",
+			__func__, ah->opmode);
 		return;
 		break;
 	}
@@ -1721,10 +1715,10 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 	else
 		nextTbtt = bs->bs_nexttbtt;
 
-	ath_print(common, ATH_DBG_BEACON, "next DTIM %d\n", bs->bs_nextdtim);
-	ath_print(common, ATH_DBG_BEACON, "next beacon %d\n", nextTbtt);
-	ath_print(common, ATH_DBG_BEACON, "beacon period %d\n", beaconintval);
-	ath_print(common, ATH_DBG_BEACON, "DTIM period %d\n", dtimperiod);
+	ath_dbg(common, ATH_DBG_BEACON, "next DTIM %d\n", bs->bs_nextdtim);
+	ath_dbg(common, ATH_DBG_BEACON, "next beacon %d\n", nextTbtt);
+	ath_dbg(common, ATH_DBG_BEACON, "beacon period %d\n", beaconintval);
+	ath_dbg(common, ATH_DBG_BEACON, "DTIM period %d\n", dtimperiod);
 
 	ENABLE_REGWRITE_BUFFER(ah);
 
@@ -1770,7 +1764,7 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
 	u16 capField = 0, eeval;
-	u8 ant_div_ctl1;
+	u8 ant_div_ctl1, tx_chainmask, rx_chainmask;
 
 	eeval = ah->eep_ops->get_eeprom(ah, EEP_REG_0);
 	regulatory->current_rd = eeval;
@@ -1789,14 +1783,14 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 			regulatory->current_rd += 5;
 		else if (regulatory->current_rd == 0x41)
 			regulatory->current_rd = 0x43;
-		ath_print(common, ATH_DBG_REGULATORY,
-			  "regdomain mapped to 0x%x\n", regulatory->current_rd);
+		ath_dbg(common, ATH_DBG_REGULATORY,
+			"regdomain mapped to 0x%x\n", regulatory->current_rd);
 	}
 
 	eeval = ah->eep_ops->get_eeprom(ah, EEP_OP_MODE);
 	if ((eeval & (AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A)) == 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "no band has been marked as supported in EEPROM.\n");
+		ath_err(common,
+			"no band has been marked as supported in EEPROM\n");
 		return -EINVAL;
 	}
 
@@ -1822,6 +1816,10 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 
 	ah->misc_mode |= AR_PCU_MIC_NEW_LOC_ENA;
 
+	/* enable key search for every frame in an aggregate */
+	if (AR_SREV_9300_20_OR_LATER(ah))
+		ah->misc_mode |= AR_PCU_ALWAYS_PERFORM_KEYSEARCH;
+
 	pCap->low_2ghz_chan = 2312;
 	pCap->high_2ghz_chan = 2732;
 
@@ -1910,13 +1908,7 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	    AR_SREV_5416(ah))
 		pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
 
-	pCap->num_antcfg_5ghz =
-		ah->eep_ops->get_num_ant_config(ah, ATH9K_HAL_FREQ_BAND_5GHZ);
-	pCap->num_antcfg_2ghz =
-		ah->eep_ops->get_num_ant_config(ah, ATH9K_HAL_FREQ_BAND_2GHZ);
-
-	if (AR_SREV_9280_20_OR_LATER(ah) &&
-	    ath9k_hw_btcoex_supported(ah)) {
+	if (AR_SREV_9280_20_OR_LATER(ah) && common->btcoex_enabled) {
 		btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO;
 		btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO;
 
@@ -1931,8 +1923,10 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	}
 
 	if (AR_SREV_9300_20_OR_LATER(ah)) {
-		pCap->hw_caps |= ATH9K_HW_CAP_EDMA | ATH9K_HW_CAP_LDPC |
-				 ATH9K_HW_CAP_FASTCLOCK;
+		pCap->hw_caps |= ATH9K_HW_CAP_EDMA | ATH9K_HW_CAP_FASTCLOCK;
+		if (!AR_SREV_9485(ah))
+			pCap->hw_caps |= ATH9K_HW_CAP_LDPC;
+
 		pCap->rx_hp_qdepth = ATH9K_HW_RX_HP_QDEPTH;
 		pCap->rx_lp_qdepth = ATH9K_HW_RX_LP_QDEPTH;
 		pCap->rx_status_len = sizeof(struct ar9003_rxs);
@@ -1952,6 +1946,9 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	if (AR_SREV_9300_20_OR_LATER(ah))
 		pCap->hw_caps |= ATH9K_HW_CAP_RAC_SUPPORTED;
 
+	if (AR_SREV_9300_20_OR_LATER(ah))
+		ah->ent_mode = REG_READ(ah, AR_ENT_OTP);
+
 	if (AR_SREV_9287_11_OR_LATER(ah) || AR_SREV_9271(ah))
 		pCap->hw_caps |= ATH9K_HW_CAP_SGI_20;
 
@@ -1962,6 +1959,29 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 			if ((ant_div_ctl1 & 0x1) && ((ant_div_ctl1 >> 3) & 0x1))
 				pCap->hw_caps |= ATH9K_HW_CAP_ANT_DIV_COMB;
 		}
+	if (AR_SREV_9300_20_OR_LATER(ah)) {
+		if (ah->eep_ops->get_eeprom(ah, EEP_CHAIN_MASK_REDUCE))
+			pCap->hw_caps |= ATH9K_HW_CAP_APM;
+	}
+
+
+
+	if (AR_SREV_9485_10(ah)) {
+		pCap->pcie_lcr_extsync_en = true;
+		pCap->pcie_lcr_offset = 0x80;
+	}
+
+	tx_chainmask = pCap->tx_chainmask;
+	rx_chainmask = pCap->rx_chainmask;
+	while (tx_chainmask || rx_chainmask) {
+		if (tx_chainmask & BIT(0))
+			pCap->max_txchains++;
+		if (rx_chainmask & BIT(0))
+			pCap->max_rxchains++;
+
+		tx_chainmask >>= 1;
+		rx_chainmask >>= 1;
+	}
 
 	return 0;
 }
@@ -2033,7 +2053,8 @@ u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio)
 		val = REG_READ(ah, AR7010_GPIO_IN);
 		return (MS(val, AR7010_GPIO_IN_VAL) & AR_GPIO_BIT(gpio)) == 0;
 	} else if (AR_SREV_9300_20_OR_LATER(ah))
-		return MS_REG_READ(AR9300, gpio) != 0;
+		return (MS(REG_READ(ah, AR_GPIO_IN), AR9300_GPIO_IN_VAL) &
+			AR_GPIO_BIT(gpio)) != 0;
 	else if (AR_SREV_9271(ah))
 		return MS_REG_READ(AR9271, gpio) != 0;
 	else if (AR_SREV_9287_11_OR_LATER(ah))
@@ -2165,7 +2186,7 @@ bool ath9k_hw_disable(struct ath_hw *ah)
 }
 EXPORT_SYMBOL(ath9k_hw_disable);
 
-void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit)
+void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test)
 {
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	struct ath9k_channel *chan = ah->curchan;
@@ -2178,7 +2199,7 @@ void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit)
 				 channel->max_antenna_gain * 2,
 				 channel->max_power * 2,
 				 min((u32) MAX_RATE_POWER,
-				 (u32) regulatory->power_limit));
+				 (u32) regulatory->power_limit), test);
 }
 EXPORT_SYMBOL(ath9k_hw_set_txpowerlimit);
 
@@ -2238,8 +2259,8 @@ void ath9k_hw_reset_tsf(struct ath_hw *ah)
 {
 	if (!ath9k_hw_wait(ah, AR_SLP32_MODE, AR_SLP32_TSF_WRITE_STATUS, 0,
 			   AH_TSF_WRITE_TIMEOUT))
-		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
-			  "AR_SLP32_TSF_WRITE_STATUS limit exceeded\n");
+		ath_dbg(ath9k_hw_common(ah), ATH_DBG_RESET,
+			"AR_SLP32_TSF_WRITE_STATUS limit exceeded\n");
 
 	REG_WRITE(ah, AR_RESET_TSF, AR_RESET_TSF_ONCE);
 }
@@ -2312,11 +2333,10 @@ static u32 rightmost_index(struct ath_gen_timer_table *timer_table, u32 *mask)
 	return timer_table->gen_timer_index[b];
 }
 
-u32 ath9k_hw_gettsf32(struct ath_hw *ah)
+static u32 ath9k_hw_gettsf32(struct ath_hw *ah)
 {
 	return REG_READ(ah, AR_TSF_L32);
 }
-EXPORT_SYMBOL(ath9k_hw_gettsf32);
 
 struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
 					  void (*trigger)(void *),
@@ -2330,9 +2350,9 @@ struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
 	timer = kzalloc(sizeof(struct ath_gen_timer), GFP_KERNEL);
 
 	if (timer == NULL) {
-		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-			  "Failed to allocate memory"
-			  "for hw timer[%d]\n", timer_index);
+		ath_err(ath9k_hw_common(ah),
+			"Failed to allocate memory for hw timer[%d]\n",
+			timer_index);
 		return NULL;
 	}
 
@@ -2361,9 +2381,9 @@ void ath9k_hw_gen_timer_start(struct ath_hw *ah,
 
 	tsf = ath9k_hw_gettsf32(ah);
 
-	ath_print(ath9k_hw_common(ah), ATH_DBG_HWTIMER,
-		  "curent tsf %x period %x"
-		  "timer_next %x\n", tsf, timer_period, timer_next);
+	ath_dbg(ath9k_hw_common(ah), ATH_DBG_HWTIMER,
+		"current tsf %x period %x timer_next %x\n",
+		tsf, timer_period, timer_next);
 
 	/*
 	 * Pull timer_next forward if the current TSF already passed it
@@ -2443,8 +2463,8 @@ void ath_gen_timer_isr(struct ath_hw *ah)
 		index = rightmost_index(timer_table, &thresh_mask);
 		timer = timer_table->timers[index];
 		BUG_ON(!timer);
-		ath_print(common, ATH_DBG_HWTIMER,
-			  "TSF overflow for Gen timer %d\n", index);
+		ath_dbg(common, ATH_DBG_HWTIMER,
+			"TSF overflow for Gen timer %d\n", index);
 		timer->overflow(timer->arg);
 	}
 
@@ -2452,8 +2472,8 @@ void ath_gen_timer_isr(struct ath_hw *ah)
 		index = rightmost_index(timer_table, &trigger_mask);
 		timer = timer_table->timers[index];
 		BUG_ON(!timer);
-		ath_print(common, ATH_DBG_HWTIMER,
-			  "Gen timer[%d] trigger\n", index);
+		ath_dbg(common, ATH_DBG_HWTIMER,
+			"Gen timer[%d] trigger\n", index);
 		timer->trigger(timer->arg);
 	}
 }
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index d032939768b..5a3dfec45e9 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -30,7 +30,6 @@
 #include "btcoex.h"
 
 #include "../regd.h"
-#include "../debug.h"
 
 #define ATHEROS_VENDOR_ID	0x168c
 
@@ -44,6 +43,7 @@
 #define AR9287_DEVID_PCI	0x002d
 #define AR9287_DEVID_PCIE	0x002e
 #define AR9300_DEVID_PCIE	0x0030
+#define AR9300_DEVID_AR9485_PCIE 0x0032
 
 #define AR5416_AR9100_DEVID	0x000b
 
@@ -157,6 +157,13 @@
 #define PAPRD_GAIN_TABLE_ENTRIES    32
 #define PAPRD_TABLE_SZ              24
 
+enum ath_hw_txq_subtype {
+	ATH_TXQ_AC_BE = 0,
+	ATH_TXQ_AC_BK = 1,
+	ATH_TXQ_AC_VI = 2,
+	ATH_TXQ_AC_VO = 3,
+};
+
 enum ath_ini_subsys {
 	ATH_INI_PRE = 0,
 	ATH_INI_CORE,
@@ -180,6 +187,7 @@ enum ath9k_hw_caps {
 	ATH9K_HW_CAP_ANT_DIV_COMB		= BIT(12),
 	ATH9K_HW_CAP_2GHZ			= BIT(13),
 	ATH9K_HW_CAP_5GHZ			= BIT(14),
+	ATH9K_HW_CAP_APM			= BIT(15),
 };
 
 struct ath9k_hw_capabilities {
@@ -191,16 +199,18 @@ struct ath9k_hw_capabilities {
 	u16 rts_aggr_limit;
 	u8 tx_chainmask;
 	u8 rx_chainmask;
+	u8 max_txchains;
+	u8 max_rxchains;
 	u16 tx_triglevel_max;
 	u16 reg_cap;
 	u8 num_gpio_pins;
-	u8 num_antcfg_2ghz;
-	u8 num_antcfg_5ghz;
 	u8 rx_hp_qdepth;
 	u8 rx_lp_qdepth;
 	u8 rx_status_len;
 	u8 tx_desc_len;
 	u8 txs_len;
+	u16 pcie_lcr_offset;
+	bool pcie_lcr_extsync_en;
 };
 
 struct ath9k_ops_config {
@@ -226,7 +236,6 @@ struct ath9k_ops_config {
 #define SPUR_DISABLE        	0
 #define SPUR_ENABLE_IOCTL   	1
 #define SPUR_ENABLE_EEPROM  	2
-#define AR_EEPROM_MODAL_SPURS   5
 #define AR_SPUR_5413_1      	1640
 #define AR_SPUR_5413_2      	1200
 #define AR_NO_SPUR      	0x8000
@@ -434,6 +443,7 @@ struct ath9k_hw_version {
 	u16 analog5GhzRev;
 	u16 analog2GhzRev;
 	u16 subsysid;
+	enum ath_usb_dev usbdev;
 };
 
 /* Generic TSF timer definitions */
@@ -478,6 +488,40 @@ struct ath_hw_antcomb_conf {
 };
 
 /**
+ * struct ath_hw_radar_conf - radar detection initialization parameters
+ *
+ * @pulse_inband: threshold for checking the ratio of in-band power
+ *	to total power for short radar pulses (half dB steps)
+ * @pulse_inband_step: threshold for checking an in-band power to total
+ *	power ratio increase for short radar pulses (half dB steps)
+ * @pulse_height: threshold for detecting the beginning of a short
+ *	radar pulse (dB step)
+ * @pulse_rssi: threshold for detecting if a short radar pulse is
+ *	gone (dB step)
+ * @pulse_maxlen: maximum pulse length (0.8 us steps)
+ *
+ * @radar_rssi: RSSI threshold for starting long radar detection (dB steps)
+ * @radar_inband: threshold for checking the ratio of in-band power
+ *	to total power for long radar pulses (half dB steps)
+ * @fir_power: threshold for detecting the end of a long radar pulse (dB)
+ *
+ * @ext_channel: enable extension channel radar detection
+ */
+struct ath_hw_radar_conf {
+	unsigned int pulse_inband;
+	unsigned int pulse_inband_step;
+	unsigned int pulse_height;
+	unsigned int pulse_rssi;
+	unsigned int pulse_maxlen;
+
+	unsigned int radar_rssi;
+	unsigned int radar_inband;
+	int fir_power;
+
+	bool ext_channel;
+};
+
+/**
  * struct ath_hw_private_ops - callbacks used internally by hardware code
  *
  * This structure contains private callbacks designed to only be used internally
@@ -488,7 +532,6 @@ struct ath_hw_antcomb_conf {
  *
  * @init_mode_regs: Initializes mode registers
  * @init_mode_gain_regs: Initialize TX/RX gain registers
- * @macversion_supported: If this specific mac revision is supported
  *
  * @rf_set_freq: change frequency
  * @spur_mitigate_freq: spur mitigation
@@ -510,7 +553,6 @@ struct ath_hw_private_ops {
 
 	void (*init_mode_regs)(struct ath_hw *ah);
 	void (*init_mode_gain_regs)(struct ath_hw *ah);
-	bool (*macversion_supported)(u32 macversion);
 	void (*setup_calibration)(struct ath_hw *ah,
 				  struct ath9k_cal_list *currCal);
 
@@ -534,7 +576,6 @@ struct ath_hw_private_ops {
 	void (*set_delta_slope)(struct ath_hw *ah, struct ath9k_channel *chan);
 	bool (*rfbus_req)(struct ath_hw *ah);
 	void (*rfbus_done)(struct ath_hw *ah);
-	void (*enable_rfkill)(struct ath_hw *ah);
 	void (*restore_chainmask)(struct ath_hw *ah);
 	void (*set_diversity)(struct ath_hw *ah, bool value);
 	u32 (*compute_pll_control)(struct ath_hw *ah,
@@ -542,6 +583,8 @@ struct ath_hw_private_ops {
 	bool (*ani_control)(struct ath_hw *ah, enum ath9k_ani_cmd cmd,
 			    int param);
 	void (*do_getnf)(struct ath_hw *ah, int16_t nfarray[NUM_NF_READINGS]);
+	void (*set_radar_params)(struct ath_hw *ah,
+				 struct ath_hw_radar_conf *conf);
 
 	/* ANI */
 	void (*ani_cache_ini_regs)(struct ath_hw *ah);
@@ -603,6 +646,10 @@ struct ath_nf_limits {
 	s16 nominal;
 };
 
+/* ah_flags */
+#define AH_USE_EEPROM   0x1
+#define AH_UNPLUGGED    0x2 /* The card has been physically removed. */
+
 struct ath_hw {
 	struct ieee80211_hw *hw;
 	struct ath_common common;
@@ -622,6 +669,7 @@ struct ath_hw {
 
 	bool sw_mgmt_crypto;
 	bool is_pciexpress;
+	bool is_monitoring;
 	bool need_an_top2_fixup;
 	u16 tx_trig_level;
 
@@ -717,9 +765,7 @@ struct ath_hw {
 	u32 *bank6Temp;
 
 	u8 txpower_limit;
-	int16_t txpower_indexoffset;
 	int coverage_class;
-	u32 beacon_interval;
 	u32 slottime;
 	u32 globaltxtimeout;
 
@@ -739,6 +785,8 @@ struct ath_hw {
 	u8 txchainmask;
 	u8 rxchainmask;
 
+	struct ath_hw_radar_conf radar_conf;
+
 	u32 originalGain[22];
 	int initPDADC;
 	int PDADCdelta;
@@ -788,6 +836,11 @@ struct ath_hw {
 	u32 bb_watchdog_last_status;
 	u32 bb_watchdog_timeout_ms; /* in ms, 0 to disable */
 
+	unsigned int paprd_target_power;
+	unsigned int paprd_training_power;
+	unsigned int paprd_ratemask;
+	unsigned int paprd_ratemask_ht40;
+	bool paprd_table_write_done;
 	u32 paprd_gain_table_entries[PAPRD_GAIN_TABLE_ENTRIES];
 	u8 paprd_gain_table_index[PAPRD_GAIN_TABLE_ENTRIES];
 	/*
@@ -796,6 +849,9 @@ struct ath_hw {
 	 * this register when in sleep states.
 	 */
 	u32 WARegVal;
+
+	/* Enterprise mode cap */
+	u32 ent_mode;
 };
 
 static inline struct ath_common *ath9k_hw_common(struct ath_hw *ah)
@@ -818,10 +874,9 @@ static inline struct ath_hw_ops *ath9k_hw_ops(struct ath_hw *ah)
 	return &ah->ops;
 }
 
-static inline int sign_extend(int val, const int nbits)
+static inline u8 get_streams(int mask)
 {
-	int order = BIT(nbits-1);
-	return (val ^ order) - order;
+	return !!(mask & BIT(0)) + !!(mask & BIT(1)) + !!(mask & BIT(2));
 }
 
 /* Initialization, Detach, Reset */
@@ -860,7 +915,7 @@ u32 ath9k_hw_getrxfilter(struct ath_hw *ah);
 void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits);
 bool ath9k_hw_phy_disable(struct ath_hw *ah);
 bool ath9k_hw_disable(struct ath_hw *ah);
-void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit);
+void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test);
 void ath9k_hw_setopmode(struct ath_hw *ah);
 void ath9k_hw_setmcastfilter(struct ath_hw *ah, u32 filter0, u32 filter1);
 void ath9k_hw_setbssidmask(struct ath_hw *ah);
@@ -892,7 +947,6 @@ void ath9k_hw_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer);
 
 void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer);
 void ath_gen_timer_isr(struct ath_hw *hw);
-u32 ath9k_hw_gettsf32(struct ath_hw *ah);
 
 void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len);
 
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index 95b41db0d86..767d8b86f1e 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -29,17 +29,27 @@ static unsigned int ath9k_debug = ATH_DBG_DEFAULT;
 module_param_named(debug, ath9k_debug, uint, 0);
 MODULE_PARM_DESC(debug, "Debugging mask");
 
-int modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
+int ath9k_modparam_nohwcrypt;
+module_param_named(nohwcrypt, ath9k_modparam_nohwcrypt, int, 0444);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
 
 int led_blink;
 module_param_named(blink, led_blink, int, 0444);
 MODULE_PARM_DESC(blink, "Enable LED blink on activity");
 
+static int ath9k_btcoex_enable;
+module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444);
+MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
+
+int ath9k_pm_qos_value = ATH9K_PM_QOS_DEFAULT_VALUE;
+module_param_named(pmqos, ath9k_pm_qos_value, int, S_IRUSR | S_IRGRP | S_IROTH);
+MODULE_PARM_DESC(pmqos, "User specified PM-QOS value");
+
+bool is_ath9k_unloaded;
 /* We use the hw_value as an index into our private channel structure */
 
 #define CHAN2G(_freq, _idx)  { \
+	.band = IEEE80211_BAND_2GHZ, \
 	.center_freq = (_freq), \
 	.hw_value = (_idx), \
 	.max_power = 20, \
@@ -206,7 +216,9 @@ static void setup_ht_cap(struct ath_softc *sc,
 	ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
 	ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8;
 
-	if (AR_SREV_9300_20_OR_LATER(ah))
+	if (AR_SREV_9485(ah))
+		max_streams = 1;
+	else if (AR_SREV_9300_20_OR_LATER(ah))
 		max_streams = 3;
 	else
 		max_streams = 2;
@@ -222,9 +234,9 @@ static void setup_ht_cap(struct ath_softc *sc,
 	tx_streams = ath9k_cmn_count_streams(common->tx_chainmask, max_streams);
 	rx_streams = ath9k_cmn_count_streams(common->rx_chainmask, max_streams);
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "TX streams %d, RX streams: %d\n",
-		  tx_streams, rx_streams);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"TX streams %d, RX streams: %d\n",
+		tx_streams, rx_streams);
 
 	if (tx_streams != rx_streams) {
 		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
@@ -267,8 +279,8 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 	struct ath_buf *bf;
 	int i, bsize, error, desc_len;
 
-	ath_print(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
-		  name, nbuf, ndesc);
+	ath_dbg(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
+		name, nbuf, ndesc);
 
 	INIT_LIST_HEAD(head);
 
@@ -279,8 +291,7 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 
 	/* ath_desc must be a multiple of DWORDs */
 	if ((desc_len % 4) != 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "ath_desc not DWORD aligned\n");
+		ath_err(common, "ath_desc not DWORD aligned\n");
 		BUG_ON((desc_len % 4) != 0);
 		error = -ENOMEM;
 		goto fail;
@@ -314,9 +325,9 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd,
 		goto fail;
 	}
 	ds = (u8 *) dd->dd_desc;
-	ath_print(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
-		  name, ds, (u32) dd->dd_desc_len,
-		  ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
+	ath_dbg(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
+		name, ds, (u32) dd->dd_desc_len,
+		ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
 
 	/* allocate buffers */
 	bsize = sizeof(struct ath_buf) * nbuf;
@@ -362,7 +373,7 @@ fail:
 #undef DS2PHYS
 }
 
-static void ath9k_init_crypto(struct ath_softc *sc)
+void ath9k_init_crypto(struct ath_softc *sc)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int i = 0;
@@ -370,9 +381,9 @@ static void ath9k_init_crypto(struct ath_softc *sc)
 	/* Get the hardware key cache size. */
 	common->keymax = sc->sc_ah->caps.keycache_size;
 	if (common->keymax > ATH_KEYMAX) {
-		ath_print(common, ATH_DBG_ANY,
-			  "Warning, using only %u entries in %u key cache\n",
-			  ATH_KEYMAX, common->keymax);
+		ath_dbg(common, ATH_DBG_ANY,
+			"Warning, using only %u entries in %u key cache\n",
+			ATH_KEYMAX, common->keymax);
 		common->keymax = ATH_KEYMAX;
 	}
 
@@ -395,7 +406,8 @@ static void ath9k_init_crypto(struct ath_softc *sc)
 
 static int ath9k_init_btcoex(struct ath_softc *sc)
 {
-	int r, qnum;
+	struct ath_txq *txq;
+	int r;
 
 	switch (sc->sc_ah->btcoex_hw.scheme) {
 	case ATH_BTCOEX_CFG_NONE:
@@ -408,8 +420,8 @@ static int ath9k_init_btcoex(struct ath_softc *sc)
 		r = ath_init_btcoex_timer(sc);
 		if (r)
 			return -1;
-		qnum = sc->tx.hwq_map[WME_AC_BE];
-		ath9k_hw_init_btcoex_hw(sc->sc_ah, qnum);
+		txq = sc->tx.txq_map[WME_AC_BE];
+		ath9k_hw_init_btcoex_hw(sc->sc_ah, txq->axq_qnum);
 		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
 		break;
 	default:
@@ -422,59 +434,18 @@ static int ath9k_init_btcoex(struct ath_softc *sc)
 
 static int ath9k_init_queues(struct ath_softc *sc)
 {
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int i = 0;
 
-	for (i = 0; i < ARRAY_SIZE(sc->tx.hwq_map); i++)
-		sc->tx.hwq_map[i] = -1;
-
 	sc->beacon.beaconq = ath9k_hw_beaconq_setup(sc->sc_ah);
-	if (sc->beacon.beaconq == -1) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup a beacon xmit queue\n");
-		goto err;
-	}
-
 	sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
-	if (sc->beacon.cabq == NULL) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup CAB xmit queue\n");
-		goto err;
-	}
 
 	sc->config.cabqReadytime = ATH_CABQ_READY_TIME;
 	ath_cabq_update(sc);
 
-	if (!ath_tx_setup(sc, WME_AC_BK)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for BK traffic\n");
-		goto err;
-	}
-
-	if (!ath_tx_setup(sc, WME_AC_BE)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for BE traffic\n");
-		goto err;
-	}
-	if (!ath_tx_setup(sc, WME_AC_VI)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for VI traffic\n");
-		goto err;
-	}
-	if (!ath_tx_setup(sc, WME_AC_VO)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to setup xmit queue for VO traffic\n");
-		goto err;
-	}
+	for (i = 0; i < WME_NUM_AC; i++)
+		sc->tx.txq_map[i] = ath_txq_setup(sc, ATH9K_TX_QUEUE_DATA, i);
 
 	return 0;
-
-err:
-	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
-		if (ATH_TXQ_SETUP(sc, i))
-			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-
-	return -EIO;
 }
 
 static int ath9k_init_channels_rates(struct ath_softc *sc)
@@ -570,6 +541,9 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
 	ah->hw_version.subsysid = subsysid;
 	sc->sc_ah = ah;
 
+	if (!sc->dev->platform_data)
+		ah->ah_flags |= AH_USE_EEPROM;
+
 	common = ath9k_hw_common(ah);
 	common->ops = &ath9k_common_ops;
 	common->bus_ops = bus_ops;
@@ -577,10 +551,10 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
 	common->hw = sc->hw;
 	common->priv = sc;
 	common->debug_mask = ath9k_debug;
+	common->btcoex_enabled = ath9k_btcoex_enable == 1;
 	spin_lock_init(&common->cc_lock);
 
 	spin_lock_init(&sc->wiphy_lock);
-	spin_lock_init(&sc->sc_resetlock);
 	spin_lock_init(&sc->sc_serial_rw);
 	spin_lock_init(&sc->sc_pm_lock);
 	mutex_init(&sc->mutex);
@@ -600,13 +574,6 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
 	if (ret)
 		goto err_hw;
 
-	ret = ath9k_init_debug(ah);
-	if (ret) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to create debugfs files\n");
-		goto err_debug;
-	}
-
 	ret = ath9k_init_queues(sc);
 	if (ret)
 		goto err_queues;
@@ -629,8 +596,6 @@ err_btcoex:
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
 err_queues:
-	ath9k_exit_debug(ah);
-err_debug:
 	ath9k_hw_deinit(ah);
 err_hw:
 	tasklet_kill(&sc->intr_tq);
@@ -642,6 +607,37 @@ err_hw:
 	return ret;
 }
 
+static void ath9k_init_band_txpower(struct ath_softc *sc, int band)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *chan;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
+	int i;
+
+	sband = &sc->sbands[band];
+	for (i = 0; i < sband->n_channels; i++) {
+		chan = &sband->channels[i];
+		ah->curchan = &ah->channels[chan->hw_value];
+		ath9k_cmn_update_ichannel(ah->curchan, chan, NL80211_CHAN_HT20);
+		ath9k_hw_set_txpowerlimit(ah, MAX_RATE_POWER, true);
+		chan->max_power = reg->max_power_level / 2;
+	}
+}
+
+static void ath9k_init_txpower_limits(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath9k_channel *curchan = ah->curchan;
+
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ)
+		ath9k_init_band_txpower(sc, IEEE80211_BAND_2GHZ);
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ)
+		ath9k_init_band_txpower(sc, IEEE80211_BAND_5GHZ);
+
+	ah->curchan = curchan;
+}
+
 void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
@@ -657,10 +653,12 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
 		 hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
 
-	if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || modparam_nohwcrypt)
+	if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || ath9k_modparam_nohwcrypt)
 		hw->flags |= IEEE80211_HW_MFP_CAPABLE;
 
 	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_P2P_GO) |
+		BIT(NL80211_IFTYPE_P2P_CLIENT) |
 		BIT(NL80211_IFTYPE_AP) |
 		BIT(NL80211_IFTYPE_WDS) |
 		BIT(NL80211_IFTYPE_STATION) |
@@ -703,6 +701,7 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
 		    const struct ath_bus_ops *bus_ops)
 {
 	struct ieee80211_hw *hw = sc->hw;
+	struct ath_wiphy *aphy = hw->priv;
 	struct ath_common *common;
 	struct ath_hw *ah;
 	int error = 0;
@@ -735,11 +734,19 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
 	if (error != 0)
 		goto error_rx;
 
+	ath9k_init_txpower_limits(sc);
+
 	/* Register with mac80211 */
 	error = ieee80211_register_hw(hw);
 	if (error)
 		goto error_register;
 
+	error = ath9k_init_debug(ah);
+	if (error) {
+		ath_err(common, "Unable to create debugfs files\n");
+		goto error_world;
+	}
+
 	/* Handle world regulatory */
 	if (!ath_is_world_regd(reg)) {
 		error = regulatory_hint(hw->wiphy, reg->alpha2);
@@ -752,10 +759,14 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
 	INIT_WORK(&sc->chan_work, ath9k_wiphy_chan_work);
 	INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work);
 	sc->wiphy_scheduler_int = msecs_to_jiffies(500);
+	aphy->last_rssi = ATH_RSSI_DUMMY_MARKER;
 
 	ath_init_leds(sc);
 	ath_start_rfkill_poll(sc);
 
+	pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+			   PM_QOS_DEFAULT_VALUE);
+
 	return 0;
 
 error_world:
@@ -794,7 +805,6 @@ static void ath9k_deinit_softc(struct ath_softc *sc)
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
 
-	ath9k_exit_debug(sc->sc_ah);
 	ath9k_hw_deinit(sc->sc_ah);
 
 	tasklet_kill(&sc->intr_tq);
@@ -824,6 +834,7 @@ void ath9k_deinit_device(struct ath_softc *sc)
 	}
 
 	ieee80211_unregister_hw(hw);
+	pm_qos_remove_request(&sc->pm_qos_req);
 	ath_rx_cleanup(sc);
 	ath_tx_cleanup(sc);
 	ath9k_deinit_softc(sc);
@@ -860,20 +871,12 @@ static int __init ath9k_init(void)
 		goto err_out;
 	}
 
-	error = ath9k_debug_create_root();
-	if (error) {
-		printk(KERN_ERR
-			"ath9k: Unable to create debugfs root: %d\n",
-			error);
-		goto err_rate_unregister;
-	}
-
 	error = ath_pci_init();
 	if (error < 0) {
 		printk(KERN_ERR
 			"ath9k: No PCI devices found, driver not installed.\n");
 		error = -ENODEV;
-		goto err_remove_root;
+		goto err_rate_unregister;
 	}
 
 	error = ath_ahb_init();
@@ -887,8 +890,6 @@ static int __init ath9k_init(void)
  err_pci_exit:
 	ath_pci_exit();
 
- err_remove_root:
-	ath9k_debug_remove_root();
  err_rate_unregister:
 	ath_rate_control_unregister();
  err_out:
@@ -898,9 +899,9 @@ module_init(ath9k_init);
 
 static void __exit ath9k_exit(void)
 {
+	is_ath9k_unloaded = true;
 	ath_ahb_exit();
 	ath_pci_exit();
-	ath9k_debug_remove_root();
 	ath_rate_control_unregister();
 	printk(KERN_INFO "%s: Driver unloaded\n", dev_info);
 }
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 8c13479b17c..180170d3ce2 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -20,11 +20,11 @@
 static void ath9k_hw_set_txq_interrupts(struct ath_hw *ah,
 					struct ath9k_tx_queue_info *qi)
 {
-	ath_print(ath9k_hw_common(ah), ATH_DBG_INTERRUPT,
-		  "tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n",
-		  ah->txok_interrupt_mask, ah->txerr_interrupt_mask,
-		  ah->txdesc_interrupt_mask, ah->txeol_interrupt_mask,
-		  ah->txurn_interrupt_mask);
+	ath_dbg(ath9k_hw_common(ah), ATH_DBG_INTERRUPT,
+		"tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n",
+		ah->txok_interrupt_mask, ah->txerr_interrupt_mask,
+		ah->txdesc_interrupt_mask, ah->txeol_interrupt_mask,
+		ah->txurn_interrupt_mask);
 
 	ENABLE_REGWRITE_BUFFER(ah);
 
@@ -56,8 +56,8 @@ EXPORT_SYMBOL(ath9k_hw_puttxbuf);
 
 void ath9k_hw_txstart(struct ath_hw *ah, u32 q)
 {
-	ath_print(ath9k_hw_common(ah), ATH_DBG_QUEUE,
-		  "Enable TXE on queue: %u\n", q);
+	ath_dbg(ath9k_hw_common(ah), ATH_DBG_QUEUE,
+		"Enable TXE on queue: %u\n", q);
 	REG_WRITE(ah, AR_Q_TXE, 1 << q);
 }
 EXPORT_SYMBOL(ath9k_hw_txstart);
@@ -117,12 +117,11 @@ EXPORT_SYMBOL(ath9k_hw_numtxpending);
 bool ath9k_hw_updatetxtriglevel(struct ath_hw *ah, bool bIncTrigLevel)
 {
 	u32 txcfg, curLevel, newLevel;
-	enum ath9k_int omask;
 
 	if (ah->tx_trig_level >= ah->config.max_txtrig_level)
 		return false;
 
-	omask = ath9k_hw_set_interrupts(ah, ah->imask & ~ATH9K_INT_GLOBAL);
+	ath9k_hw_disable_interrupts(ah);
 
 	txcfg = REG_READ(ah, AR_TXCFG);
 	curLevel = MS(txcfg, AR_FTRIG);
@@ -136,7 +135,7 @@ bool ath9k_hw_updatetxtriglevel(struct ath_hw *ah, bool bIncTrigLevel)
 		REG_WRITE(ah, AR_TXCFG,
 			  (txcfg & ~AR_FTRIG) | SM(newLevel, AR_FTRIG));
 
-	ath9k_hw_set_interrupts(ah, omask);
+	ath9k_hw_enable_interrupts(ah);
 
 	ah->tx_trig_level = newLevel;
 
@@ -155,15 +154,15 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 	u32 wait_time = ATH9K_TX_STOP_DMA_TIMEOUT / ATH9K_TIME_QUANTUM;
 
 	if (q >= pCap->total_queues) {
-		ath_print(common, ATH_DBG_QUEUE, "Stopping TX DMA, "
-			  "invalid queue: %u\n", q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"Stopping TX DMA, invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		ath_print(common, ATH_DBG_QUEUE, "Stopping TX DMA, "
-			  "inactive queue: %u\n", q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"Stopping TX DMA, inactive queue: %u\n", q);
 		return false;
 	}
 
@@ -176,9 +175,9 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 	}
 
 	if (ath9k_hw_numtxpending(ah, q)) {
-		ath_print(common, ATH_DBG_QUEUE,
-			  "%s: Num of pending TX Frames %d on Q %d\n",
-			  __func__, ath9k_hw_numtxpending(ah, q), q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"%s: Num of pending TX Frames %d on Q %d\n",
+			__func__, ath9k_hw_numtxpending(ah, q), q);
 
 		for (j = 0; j < 2; j++) {
 			tsfLow = REG_READ(ah, AR_TSF_L32);
@@ -192,9 +191,9 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 			if ((REG_READ(ah, AR_TSF_L32) >> 10) == (tsfLow >> 10))
 				break;
 
-			ath_print(common, ATH_DBG_QUEUE,
-				  "TSF has moved while trying to set "
-				  "quiet time TSF: 0x%08x\n", tsfLow);
+			ath_dbg(common, ATH_DBG_QUEUE,
+				"TSF has moved while trying to set quiet time TSF: 0x%08x\n",
+				tsfLow);
 		}
 
 		REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
@@ -205,9 +204,8 @@ bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 		wait = wait_time;
 		while (ath9k_hw_numtxpending(ah, q)) {
 			if ((--wait) == 0) {
-				ath_print(common, ATH_DBG_FATAL,
-					  "Failed to stop TX DMA in 100 "
-					  "msec after killing last frame\n");
+				ath_err(common,
+					"Failed to stop TX DMA in 100 msec after killing last frame\n");
 				break;
 			}
 			udelay(ATH9K_TIME_QUANTUM);
@@ -240,19 +238,19 @@ bool ath9k_hw_set_txq_props(struct ath_hw *ah, int q,
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		ath_print(common, ATH_DBG_QUEUE, "Set TXQ properties, "
-			  "invalid queue: %u\n", q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"Set TXQ properties, invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		ath_print(common, ATH_DBG_QUEUE, "Set TXQ properties, "
-			  "inactive queue: %u\n", q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"Set TXQ properties, inactive queue: %u\n", q);
 		return false;
 	}
 
-	ath_print(common, ATH_DBG_QUEUE, "Set queue properties for: %u\n", q);
+	ath_dbg(common, ATH_DBG_QUEUE, "Set queue properties for: %u\n", q);
 
 	qi->tqi_ver = qinfo->tqi_ver;
 	qi->tqi_subtype = qinfo->tqi_subtype;
@@ -311,15 +309,15 @@ bool ath9k_hw_get_txq_props(struct ath_hw *ah, int q,
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		ath_print(common, ATH_DBG_QUEUE, "Get TXQ properties, "
-			  "invalid queue: %u\n", q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"Get TXQ properties, invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		ath_print(common, ATH_DBG_QUEUE, "Get TXQ properties, "
-			  "inactive queue: %u\n", q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"Get TXQ properties, inactive queue: %u\n", q);
 		return false;
 	}
 
@@ -369,23 +367,20 @@ int ath9k_hw_setuptxqueue(struct ath_hw *ah, enum ath9k_tx_queue type,
 			    ATH9K_TX_QUEUE_INACTIVE)
 				break;
 		if (q == pCap->total_queues) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "No available TX queue\n");
+			ath_err(common, "No available TX queue\n");
 			return -1;
 		}
 		break;
 	default:
-		ath_print(common, ATH_DBG_FATAL,
-			  "Invalid TX queue type: %u\n", type);
+		ath_err(common, "Invalid TX queue type: %u\n", type);
 		return -1;
 	}
 
-	ath_print(common, ATH_DBG_QUEUE, "Setup TX queue: %u\n", q);
+	ath_dbg(common, ATH_DBG_QUEUE, "Setup TX queue: %u\n", q);
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type != ATH9K_TX_QUEUE_INACTIVE) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "TX queue: %u already active\n", q);
+		ath_err(common, "TX queue: %u already active\n", q);
 		return -1;
 	}
 	memset(qi, 0, sizeof(struct ath9k_tx_queue_info));
@@ -417,18 +412,18 @@ bool ath9k_hw_releasetxqueue(struct ath_hw *ah, u32 q)
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		ath_print(common, ATH_DBG_QUEUE, "Release TXQ, "
-			  "invalid queue: %u\n", q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"Release TXQ, invalid queue: %u\n", q);
 		return false;
 	}
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		ath_print(common, ATH_DBG_QUEUE, "Release TXQ, "
-			  "inactive queue: %u\n", q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"Release TXQ, inactive queue: %u\n", q);
 		return false;
 	}
 
-	ath_print(common, ATH_DBG_QUEUE, "Release TX queue: %u\n", q);
+	ath_dbg(common, ATH_DBG_QUEUE, "Release TX queue: %u\n", q);
 
 	qi->tqi_type = ATH9K_TX_QUEUE_INACTIVE;
 	ah->txok_interrupt_mask &= ~(1 << q);
@@ -451,19 +446,19 @@ bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
 	u32 cwMin, chanCwMin, value;
 
 	if (q >= pCap->total_queues) {
-		ath_print(common, ATH_DBG_QUEUE, "Reset TXQ, "
-			  "invalid queue: %u\n", q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"Reset TXQ, invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		ath_print(common, ATH_DBG_QUEUE, "Reset TXQ, "
-			  "inactive queue: %u\n", q);
+		ath_dbg(common, ATH_DBG_QUEUE,
+			"Reset TXQ, inactive queue: %u\n", q);
 		return true;
 	}
 
-	ath_print(common, ATH_DBG_QUEUE, "Reset TX queue: %u\n", q);
+	ath_dbg(common, ATH_DBG_QUEUE, "Reset TX queue: %u\n", q);
 
 	if (qi->tqi_cwmin == ATH9K_TXQ_USEDEFAULT) {
 		if (chan && IS_CHAN_B(chan))
@@ -697,16 +692,16 @@ int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
 	if ((ads.ds_rxstatus8 & AR_RxFrameOK) == 0) {
 		if (ads.ds_rxstatus8 & AR_CRCErr)
 			rs->rs_status |= ATH9K_RXERR_CRC;
-		else if (ads.ds_rxstatus8 & AR_PHYErr) {
+		if (ads.ds_rxstatus8 & AR_PHYErr) {
 			rs->rs_status |= ATH9K_RXERR_PHY;
 			phyerr = MS(ads.ds_rxstatus8, AR_PHYErrCode);
 			rs->rs_phyerr = phyerr;
-		} else if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
+		}
+		if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
 			rs->rs_status |= ATH9K_RXERR_DECRYPT;
-		else if ((ads.ds_rxstatus8 & AR_MichaelErr) &&
-		         rs->rs_keyix != ATH9K_RXKEYIX_INVALID)
+		if (ads.ds_rxstatus8 & AR_MichaelErr)
 			rs->rs_status |= ATH9K_RXERR_MIC;
-		else if (ads.ds_rxstatus8 & AR_KeyMiss)
+		if (ads.ds_rxstatus8 & AR_KeyMiss)
 			rs->rs_status |= ATH9K_RXERR_DECRYPT;
 	}
 
@@ -736,9 +731,9 @@ bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set)
 				     AR_DIAG_RX_ABORT));
 
 			reg = REG_READ(ah, AR_OBS_BUS_1);
-			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
-				  "RX failed to go idle in 10 ms RXSM=0x%x\n",
-				  reg);
+			ath_err(ath9k_hw_common(ah),
+				"RX failed to go idle in 10 ms RXSM=0x%x\n",
+				reg);
 
 			return false;
 		}
@@ -767,14 +762,6 @@ void ath9k_hw_startpcureceive(struct ath_hw *ah, bool is_scanning)
 }
 EXPORT_SYMBOL(ath9k_hw_startpcureceive);
 
-void ath9k_hw_stoppcurecv(struct ath_hw *ah)
-{
-	REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_DIS);
-
-	ath9k_hw_disable_mib_counters(ah);
-}
-EXPORT_SYMBOL(ath9k_hw_stoppcurecv);
-
 void ath9k_hw_abortpcurecv(struct ath_hw *ah)
 {
 	REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_RX_ABORT | AR_DIAG_RX_DIS);
@@ -800,12 +787,11 @@ bool ath9k_hw_stopdmarecv(struct ath_hw *ah)
 	}
 
 	if (i == 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "DMA failed to stop in %d ms "
-			  "AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
-			  AH_RX_STOP_DMA_TIMEOUT / 1000,
-			  REG_READ(ah, AR_CR),
-			  REG_READ(ah, AR_DIAG_SW));
+		ath_err(common,
+			"DMA failed to stop in %d ms AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
+			AH_RX_STOP_DMA_TIMEOUT / 1000,
+			REG_READ(ah, AR_CR),
+			REG_READ(ah, AR_DIAG_SW));
 		return false;
 	} else {
 		return true;
@@ -849,28 +835,59 @@ bool ath9k_hw_intrpend(struct ath_hw *ah)
 }
 EXPORT_SYMBOL(ath9k_hw_intrpend);
 
-enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah,
-					      enum ath9k_int ints)
+void ath9k_hw_disable_interrupts(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	ath_dbg(common, ATH_DBG_INTERRUPT, "disable IER\n");
+	REG_WRITE(ah, AR_IER, AR_IER_DISABLE);
+	(void) REG_READ(ah, AR_IER);
+	if (!AR_SREV_9100(ah)) {
+		REG_WRITE(ah, AR_INTR_ASYNC_ENABLE, 0);
+		(void) REG_READ(ah, AR_INTR_ASYNC_ENABLE);
+
+		REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
+		(void) REG_READ(ah, AR_INTR_SYNC_ENABLE);
+	}
+}
+EXPORT_SYMBOL(ath9k_hw_disable_interrupts);
+
+void ath9k_hw_enable_interrupts(struct ath_hw *ah)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	if (!(ah->imask & ATH9K_INT_GLOBAL))
+		return;
+
+	ath_dbg(common, ATH_DBG_INTERRUPT, "enable IER\n");
+	REG_WRITE(ah, AR_IER, AR_IER_ENABLE);
+	if (!AR_SREV_9100(ah)) {
+		REG_WRITE(ah, AR_INTR_ASYNC_ENABLE,
+			  AR_INTR_MAC_IRQ);
+		REG_WRITE(ah, AR_INTR_ASYNC_MASK, AR_INTR_MAC_IRQ);
+
+
+		REG_WRITE(ah, AR_INTR_SYNC_ENABLE,
+			  AR_INTR_SYNC_DEFAULT);
+		REG_WRITE(ah, AR_INTR_SYNC_MASK,
+			  AR_INTR_SYNC_DEFAULT);
+	}
+	ath_dbg(common, ATH_DBG_INTERRUPT, "AR_IMR 0x%x IER 0x%x\n",
+		REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER));
+}
+EXPORT_SYMBOL(ath9k_hw_enable_interrupts);
+
+void ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints)
 {
 	enum ath9k_int omask = ah->imask;
 	u32 mask, mask2;
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	struct ath_common *common = ath9k_hw_common(ah);
 
-	ath_print(common, ATH_DBG_INTERRUPT, "0x%x => 0x%x\n", omask, ints);
+	if (!(ints & ATH9K_INT_GLOBAL))
+		ath9k_hw_enable_interrupts(ah);
 
-	if (omask & ATH9K_INT_GLOBAL) {
-		ath_print(common, ATH_DBG_INTERRUPT, "disable IER\n");
-		REG_WRITE(ah, AR_IER, AR_IER_DISABLE);
-		(void) REG_READ(ah, AR_IER);
-		if (!AR_SREV_9100(ah)) {
-			REG_WRITE(ah, AR_INTR_ASYNC_ENABLE, 0);
-			(void) REG_READ(ah, AR_INTR_ASYNC_ENABLE);
-
-			REG_WRITE(ah, AR_INTR_SYNC_ENABLE, 0);
-			(void) REG_READ(ah, AR_INTR_SYNC_ENABLE);
-		}
-	}
+	ath_dbg(common, ATH_DBG_INTERRUPT, "0x%x => 0x%x\n", omask, ints);
 
 	/* TODO: global int Ref count */
 	mask = ints & ATH9K_INT_COMMON;
@@ -931,7 +948,7 @@ enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah,
 			mask2 |= AR_IMR_S2_CST;
 	}
 
-	ath_print(common, ATH_DBG_INTERRUPT, "new IMR 0x%x\n", mask);
+	ath_dbg(common, ATH_DBG_INTERRUPT, "new IMR 0x%x\n", mask);
 	REG_WRITE(ah, AR_IMR, mask);
 	ah->imrs2_reg &= ~(AR_IMR_S2_TIM | AR_IMR_S2_DTIM | AR_IMR_S2_DTIMSYNC |
 			   AR_IMR_S2_CABEND | AR_IMR_S2_CABTO |
@@ -946,24 +963,8 @@ enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah,
 			REG_CLR_BIT(ah, AR_IMR_S5, AR_IMR_S5_TIM_TIMER);
 	}
 
-	if (ints & ATH9K_INT_GLOBAL) {
-		ath_print(common, ATH_DBG_INTERRUPT, "enable IER\n");
-		REG_WRITE(ah, AR_IER, AR_IER_ENABLE);
-		if (!AR_SREV_9100(ah)) {
-			REG_WRITE(ah, AR_INTR_ASYNC_ENABLE,
-				  AR_INTR_MAC_IRQ);
-			REG_WRITE(ah, AR_INTR_ASYNC_MASK, AR_INTR_MAC_IRQ);
-
-
-			REG_WRITE(ah, AR_INTR_SYNC_ENABLE,
-				  AR_INTR_SYNC_DEFAULT);
-			REG_WRITE(ah, AR_INTR_SYNC_MASK,
-				  AR_INTR_SYNC_DEFAULT);
-		}
-		ath_print(common, ATH_DBG_INTERRUPT, "AR_IMR 0x%x IER 0x%x\n",
-			  REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER));
-	}
+	ath9k_hw_enable_interrupts(ah);
 
-	return omask;
+	return;
 }
 EXPORT_SYMBOL(ath9k_hw_set_interrupts);
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index 7c1a34d64f6..7512f97e8f4 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -104,13 +104,11 @@ struct ath_tx_status {
 	u32 ts_tstamp;
 	u16 ts_seqnum;
 	u8 ts_status;
-	u8 ts_ratecode;
 	u8 ts_rateindex;
 	int8_t ts_rssi;
 	u8 ts_shortretry;
 	u8 ts_longretry;
 	u8 ts_virtcol;
-	u8 ts_antenna;
 	u8 ts_flags;
 	int8_t ts_rssi_ctl0;
 	int8_t ts_rssi_ctl1;
@@ -121,7 +119,6 @@ struct ath_tx_status {
 	u8 qid;
 	u16 desc_id;
 	u8 tid;
-	u8 pad[2];
 	u32 ba_low;
 	u32 ba_high;
 	u32 evm0;
@@ -240,7 +237,7 @@ struct ath_desc {
 	u32 ds_ctl1;
 	u32 ds_hw[20];
 	void *ds_vdata;
-} __packed;
+} __packed __aligned(4);
 
 #define ATH9K_TXDESC_CLRDMASK		0x0001
 #define ATH9K_TXDESC_NOACK		0x0002
@@ -310,7 +307,7 @@ struct ar5416_desc {
 			u32 status8;
 		} rx;
 	} u;
-} __packed;
+} __packed __aligned(4);
 
 #define AR5416DESC(_ds)         ((struct ar5416_desc *)(_ds))
 #define AR5416DESC_CONST(_ds)   ((const struct ar5416_desc *)(_ds))
@@ -669,6 +666,7 @@ enum ath9k_key_type {
 
 struct ath_hw;
 struct ath9k_channel;
+enum ath9k_int;
 
 u32 ath9k_hw_gettxbuf(struct ath_hw *ah, u32 q);
 void ath9k_hw_puttxbuf(struct ath_hw *ah, u32 q, u32 txdp);
@@ -693,15 +691,15 @@ void ath9k_hw_setuprxdesc(struct ath_hw *ah, struct ath_desc *ds,
 bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set);
 void ath9k_hw_putrxbuf(struct ath_hw *ah, u32 rxdp);
 void ath9k_hw_startpcureceive(struct ath_hw *ah, bool is_scanning);
-void ath9k_hw_stoppcurecv(struct ath_hw *ah);
 void ath9k_hw_abortpcurecv(struct ath_hw *ah);
 bool ath9k_hw_stopdmarecv(struct ath_hw *ah);
 int ath9k_hw_beaconq_setup(struct ath_hw *ah);
 
 /* Interrupt Handling */
 bool ath9k_hw_intrpend(struct ath_hw *ah);
-enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah,
-				       enum ath9k_int ints);
+void ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints);
+void ath9k_hw_enable_interrupts(struct ath_hw *ah);
+void ath9k_hw_disable_interrupts(struct ath_hw *ah);
 
 void ar9002_hw_attach_mac_ops(struct ath_hw *ah);
 
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index b52f1cf8a60..f90a6ca94a7 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -23,7 +23,7 @@ static void ath_update_txpow(struct ath_softc *sc)
 	struct ath_hw *ah = sc->sc_ah;
 
 	if (sc->curtxpow != sc->config.txpowlimit) {
-		ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit);
+		ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit, false);
 		/* read back in case value is clamped */
 		sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit;
 	}
@@ -93,11 +93,13 @@ void ath9k_ps_wakeup(struct ath_softc *sc)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	unsigned long flags;
+	enum ath9k_power_mode power_mode;
 
 	spin_lock_irqsave(&sc->sc_pm_lock, flags);
 	if (++sc->ps_usecount != 1)
 		goto unlock;
 
+	power_mode = sc->sc_ah->power_mode;
 	ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
 
 	/*
@@ -105,10 +107,12 @@ void ath9k_ps_wakeup(struct ath_softc *sc)
 	 * useful data. Better clear them now so that they don't mess up
 	 * survey data results.
 	 */
-	spin_lock(&common->cc_lock);
-	ath_hw_cycle_counters_update(common);
-	memset(&common->cc_survey, 0, sizeof(common->cc_survey));
-	spin_unlock(&common->cc_lock);
+	if (power_mode != ATH9K_PM_AWAKE) {
+		spin_lock(&common->cc_lock);
+		ath_hw_cycle_counters_update(common);
+		memset(&common->cc_survey, 0, sizeof(common->cc_survey));
+		spin_unlock(&common->cc_lock);
+	}
 
  unlock:
 	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
@@ -230,6 +234,8 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 
 	ath9k_ps_wakeup(sc);
 
+	spin_lock_bh(&sc->sc_pcu_lock);
+
 	/*
 	 * This is only performed if the channel settings have
 	 * actually changed.
@@ -239,12 +245,11 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	 * hardware at the new frequency, and then re-enable
 	 * the relevant bits of the h/w.
 	 */
-	ath9k_hw_set_interrupts(ah, 0);
-	ath_drain_all_txq(sc, false);
-
-	spin_lock_bh(&sc->rx.pcu_lock);
+	ath9k_hw_disable_interrupts(ah);
+	stopped = ath_drain_all_txq(sc, false);
 
-	stopped = ath_stoprecv(sc);
+	if (!ath_stoprecv(sc))
+		stopped = false;
 
 	/* XXX: do not flush receive queue here. We don't want
 	 * to flush data frames already in queue because of
@@ -256,46 +261,39 @@ int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 	if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
 		caldata = &aphy->caldata;
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
-		  sc->sc_ah->curchan->channel,
-		  channel->center_freq, conf_is_ht40(conf),
-		  fastcc);
-
-	spin_lock_bh(&sc->sc_resetlock);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
+		sc->sc_ah->curchan->channel,
+		channel->center_freq, conf_is_ht40(conf),
+		fastcc);
 
 	r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
 	if (r) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to reset channel (%u MHz), "
-			  "reset status %d\n",
-			  channel->center_freq, r);
-		spin_unlock_bh(&sc->sc_resetlock);
-		spin_unlock_bh(&sc->rx.pcu_lock);
+		ath_err(common,
+			"Unable to reset channel (%u MHz), reset status %d\n",
+			channel->center_freq, r);
 		goto ps_restore;
 	}
-	spin_unlock_bh(&sc->sc_resetlock);
 
 	if (ath_startrecv(sc) != 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to restart recv logic\n");
+		ath_err(common, "Unable to restart recv logic\n");
 		r = -EIO;
-		spin_unlock_bh(&sc->rx.pcu_lock);
 		goto ps_restore;
 	}
 
-	spin_unlock_bh(&sc->rx.pcu_lock);
-
 	ath_update_txpow(sc);
 	ath9k_hw_set_interrupts(ah, ah->imask);
 
 	if (!(sc->sc_flags & (SC_OP_OFFCHANNEL))) {
-		ath_beacon_config(sc, NULL);
+		if (sc->sc_flags & SC_OP_BEACONS)
+			ath_beacon_config(sc, NULL);
 		ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 		ath_start_ani(common);
 	}
 
  ps_restore:
+	spin_unlock_bh(&sc->sc_pcu_lock);
+
 	ath9k_ps_restore(sc);
 	return r;
 }
@@ -323,6 +321,42 @@ static void ath_paprd_activate(struct ath_softc *sc)
 	ath9k_ps_restore(sc);
 }
 
+static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int chain)
+{
+	struct ieee80211_hw *hw = sc->hw;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ath_tx_control txctl;
+	int time_left;
+
+	memset(&txctl, 0, sizeof(txctl));
+	txctl.txq = sc->tx.txq_map[WME_AC_BE];
+
+	memset(tx_info, 0, sizeof(*tx_info));
+	tx_info->band = hw->conf.channel->band;
+	tx_info->flags |= IEEE80211_TX_CTL_NO_ACK;
+	tx_info->control.rates[0].idx = 0;
+	tx_info->control.rates[0].count = 1;
+	tx_info->control.rates[0].flags = IEEE80211_TX_RC_MCS;
+	tx_info->control.rates[1].idx = -1;
+
+	init_completion(&sc->paprd_complete);
+	sc->paprd_pending = true;
+	txctl.paprd = BIT(chain);
+	if (ath_tx_start(hw, skb, &txctl) != 0)
+		return false;
+
+	time_left = wait_for_completion_timeout(&sc->paprd_complete,
+			msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
+	sc->paprd_pending = false;
+
+	if (!time_left)
+		ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CALIBRATE,
+			"Timeout waiting for paprd training on TX chain %d\n",
+			chain);
+
+	return !!time_left;
+}
+
 void ath_paprd_calibrate(struct work_struct *work)
 {
 	struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work);
@@ -330,28 +364,23 @@ void ath_paprd_calibrate(struct work_struct *work)
 	struct ath_hw *ah = sc->sc_ah;
 	struct ieee80211_hdr *hdr;
 	struct sk_buff *skb = NULL;
-	struct ieee80211_tx_info *tx_info;
-	int band = hw->conf.channel->band;
-	struct ieee80211_supported_band *sband = &sc->sbands[band];
-	struct ath_tx_control txctl;
 	struct ath9k_hw_cal_data *caldata = ah->caldata;
 	struct ath_common *common = ath9k_hw_common(ah);
-	int qnum, ftype;
+	int ftype;
 	int chain_ok = 0;
 	int chain;
 	int len = 1800;
-	int time_left;
-	int i;
 
 	if (!caldata)
 		return;
 
+	if (ar9003_paprd_init_table(ah) < 0)
+		return;
+
 	skb = alloc_skb(len, GFP_KERNEL);
 	if (!skb)
 		return;
 
-	tx_info = IEEE80211_SKB_CB(skb);
-
 	skb_put(skb, len);
 	memset(skb->data, 0, len);
 	hdr = (struct ieee80211_hdr *)skb->data;
@@ -362,40 +391,25 @@ void ath_paprd_calibrate(struct work_struct *work)
 	memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
 	memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
 
-	memset(&txctl, 0, sizeof(txctl));
-	qnum = sc->tx.hwq_map[WME_AC_BE];
-	txctl.txq = &sc->tx.txq[qnum];
-
 	ath9k_ps_wakeup(sc);
-	ar9003_paprd_init_table(ah);
 	for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
 		if (!(common->tx_chainmask & BIT(chain)))
 			continue;
 
 		chain_ok = 0;
-		memset(tx_info, 0, sizeof(*tx_info));
-		tx_info->band = band;
 
-		for (i = 0; i < 4; i++) {
-			tx_info->control.rates[i].idx = sband->n_bitrates - 1;
-			tx_info->control.rates[i].count = 6;
-		}
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Sending PAPRD frame for thermal measurement "
+			"on chain %d\n", chain);
+		if (!ath_paprd_send_frame(sc, skb, chain))
+			goto fail_paprd;
 
-		init_completion(&sc->paprd_complete);
 		ar9003_paprd_setup_gain_table(ah, chain);
-		txctl.paprd = BIT(chain);
-		if (ath_tx_start(hw, skb, &txctl) != 0)
-			break;
 
-		time_left = wait_for_completion_timeout(&sc->paprd_complete,
-				msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
-		if (!time_left) {
-			ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
-				  "Timeout waiting for paprd training on "
-				  "TX chain %d\n",
-				  chain);
+		ath_dbg(common, ATH_DBG_CALIBRATE,
+			"Sending PAPRD training frame on chain %d\n", chain);
+		if (!ath_paprd_send_frame(sc, skb, chain))
 			goto fail_paprd;
-		}
 
 		if (!ar9003_paprd_is_done(ah))
 			break;
@@ -452,7 +466,7 @@ void ath_ani_calibrate(unsigned long data)
 	/* Long calibration runs independently of short calibration. */
 	if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
 		longcal = true;
-		ath_print(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
+		ath_dbg(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
 		common->ani.longcal_timer = timestamp;
 	}
 
@@ -460,8 +474,8 @@ void ath_ani_calibrate(unsigned long data)
 	if (!common->ani.caldone) {
 		if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
 			shortcal = true;
-			ath_print(common, ATH_DBG_ANI,
-				  "shortcal @%lu\n", jiffies);
+			ath_dbg(common, ATH_DBG_ANI,
+				"shortcal @%lu\n", jiffies);
 			common->ani.shortcal_timer = timestamp;
 			common->ani.resetcal_timer = timestamp;
 		}
@@ -520,49 +534,25 @@ set_timer:
 	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) {
 		if (!ah->caldata->paprd_done)
 			ieee80211_queue_work(sc->hw, &sc->paprd_work);
-		else
+		else if (!ah->paprd_table_write_done)
 			ath_paprd_activate(sc);
 	}
 }
 
-/*
- * Update tx/rx chainmask. For legacy association,
- * hard code chainmask to 1x1, for 11n association, use
- * the chainmask configuration, for bt coexistence, use
- * the chainmask configuration even in legacy mode.
- */
-void ath_update_chainmask(struct ath_softc *sc, int is_ht)
-{
-	struct ath_hw *ah = sc->sc_ah;
-	struct ath_common *common = ath9k_hw_common(ah);
-
-	if ((sc->sc_flags & SC_OP_OFFCHANNEL) || is_ht ||
-	    (ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE)) {
-		common->tx_chainmask = ah->caps.tx_chainmask;
-		common->rx_chainmask = ah->caps.rx_chainmask;
-	} else {
-		common->tx_chainmask = 1;
-		common->rx_chainmask = 1;
-	}
-
-	ath_print(common, ATH_DBG_CONFIG,
-		  "tx chmask: %d, rx chmask: %d\n",
-		  common->tx_chainmask,
-		  common->rx_chainmask);
-}
-
 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
 {
 	struct ath_node *an;
-
+	struct ath_hw *ah = sc->sc_ah;
 	an = (struct ath_node *)sta->drv_priv;
 
+	if ((ah->caps.hw_caps) & ATH9K_HW_CAP_APM)
+		sc->sc_flags |= SC_OP_ENABLE_APM;
+
 	if (sc->sc_flags & SC_OP_TXAGGR) {
 		ath_tx_node_init(sc, an);
 		an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 				     sta->ht_cap.ampdu_factor);
 		an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
-		an->last_rssi = ATH_RSSI_DUMMY_MARKER;
 	}
 }
 
@@ -610,6 +600,8 @@ void ath9k_tasklet(unsigned long data)
 		return;
 	}
 
+	spin_lock(&sc->sc_pcu_lock);
+
 	if (!ath9k_hw_check_alive(ah))
 		ieee80211_queue_work(sc->hw, &sc->hw_check_work);
 
@@ -620,15 +612,12 @@ void ath9k_tasklet(unsigned long data)
 		rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
 
 	if (status & rxmask) {
-		spin_lock_bh(&sc->rx.pcu_lock);
-
 		/* Check for high priority Rx first */
 		if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
 		    (status & ATH9K_INT_RXHP))
 			ath_rx_tasklet(sc, 0, true);
 
 		ath_rx_tasklet(sc, 0, false);
-		spin_unlock_bh(&sc->rx.pcu_lock);
 	}
 
 	if (status & ATH9K_INT_TX) {
@@ -643,8 +632,8 @@ void ath9k_tasklet(unsigned long data)
 		 * TSF sync does not look correct; remain awake to sync with
 		 * the next Beacon.
 		 */
-		ath_print(common, ATH_DBG_PS,
-			  "TSFOOR - Sync with next Beacon\n");
+		ath_dbg(common, ATH_DBG_PS,
+			"TSFOOR - Sync with next Beacon\n");
 		sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
 	}
 
@@ -653,7 +642,9 @@ void ath9k_tasklet(unsigned long data)
 			ath_gen_timer_isr(sc->sc_ah);
 
 	/* re-enable hardware interrupt */
-	ath9k_hw_set_interrupts(ah, ah->imask);
+	ath9k_hw_enable_interrupts(ah);
+
+	spin_unlock(&sc->sc_pcu_lock);
 	ath9k_ps_restore(sc);
 }
 
@@ -752,7 +743,7 @@ irqreturn_t ath_isr(int irq, void *dev)
 		 * interrupt; otherwise it will continue to
 		 * fire.
 		 */
-		ath9k_hw_set_interrupts(ah, 0);
+		ath9k_hw_disable_interrupts(ah);
 		/*
 		 * Let the hal handle the event. We assume
 		 * it will clear whatever condition caused
@@ -761,11 +752,13 @@ irqreturn_t ath_isr(int irq, void *dev)
 		spin_lock(&common->cc_lock);
 		ath9k_hw_proc_mib_event(ah);
 		spin_unlock(&common->cc_lock);
-		ath9k_hw_set_interrupts(ah, ah->imask);
+		ath9k_hw_enable_interrupts(ah);
 	}
 
 	if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
 		if (status & ATH9K_INT_TIM_TIMER) {
+			if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle))
+				goto chip_reset;
 			/* Clear RxAbort bit so that we can
 			 * receive frames */
 			ath9k_setpower(sc, ATH9K_PM_AWAKE);
@@ -778,8 +771,8 @@ chip_reset:
 	ath_debug_stat_interrupt(sc, status);
 
 	if (sched) {
-		/* turn off every interrupt except SWBA */
-		ath9k_hw_set_interrupts(ah, (ah->imask & ATH9K_INT_SWBA));
+		/* turn off every interrupt */
+		ath9k_hw_disable_interrupts(ah);
 		tasklet_schedule(&sc->intr_tq);
 	}
 
@@ -831,16 +824,18 @@ static u32 ath_get_extchanmode(struct ath_softc *sc,
 }
 
 static void ath9k_bss_assoc_info(struct ath_softc *sc,
+				 struct ieee80211_hw *hw,
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *bss_conf)
 {
+	struct ath_wiphy *aphy = hw->priv;
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 
 	if (bss_conf->assoc) {
-		ath_print(common, ATH_DBG_CONFIG,
-			  "Bss Info ASSOC %d, bssid: %pM\n",
-			   bss_conf->aid, common->curbssid);
+		ath_dbg(common, ATH_DBG_CONFIG,
+			"Bss Info ASSOC %d, bssid: %pM\n",
+			bss_conf->aid, common->curbssid);
 
 		/* New association, store aid */
 		common->curaid = bss_conf->aid;
@@ -857,12 +852,13 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 		ath_beacon_config(sc, vif);
 
 		/* Reset rssi stats */
+		aphy->last_rssi = ATH_RSSI_DUMMY_MARKER;
 		sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
 
 		sc->sc_flags |= SC_OP_ANI_RUN;
 		ath_start_ani(common);
 	} else {
-		ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
+		ath_dbg(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
 		common->curaid = 0;
 		/* Stop ANI */
 		sc->sc_flags &= ~SC_OP_ANI_RUN;
@@ -878,31 +874,25 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	int r;
 
 	ath9k_ps_wakeup(sc);
+	spin_lock_bh(&sc->sc_pcu_lock);
+
 	ath9k_hw_configpcipowersave(ah, 0, 0);
 
 	if (!ah->curchan)
 		ah->curchan = ath_get_curchannel(sc, sc->hw);
 
-	spin_lock_bh(&sc->rx.pcu_lock);
-	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 	if (r) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to reset channel (%u MHz), "
-			  "reset status %d\n",
-			  channel->center_freq, r);
+		ath_err(common,
+			"Unable to reset channel (%u MHz), reset status %d\n",
+			channel->center_freq, r);
 	}
-	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath_update_txpow(sc);
 	if (ath_startrecv(sc) != 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to restart recv logic\n");
-		spin_unlock_bh(&sc->rx.pcu_lock);
-		return;
+		ath_err(common, "Unable to restart recv logic\n");
+		goto out;
 	}
-	spin_unlock_bh(&sc->rx.pcu_lock);
-
 	if (sc->sc_flags & SC_OP_BEACONS)
 		ath_beacon_config(sc, NULL);	/* restart beacons */
 
@@ -915,6 +905,9 @@ void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	ath9k_hw_set_gpio(ah, ah->led_pin, 0);
 
 	ieee80211_wake_queues(hw);
+out:
+	spin_unlock_bh(&sc->sc_pcu_lock);
+
 	ath9k_ps_restore(sc);
 }
 
@@ -925,6 +918,8 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	int r;
 
 	ath9k_ps_wakeup(sc);
+	spin_lock_bh(&sc->sc_pcu_lock);
+
 	ieee80211_stop_queues(hw);
 
 	/*
@@ -937,34 +932,30 @@ void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 	}
 
 	/* Disable interrupts */
-	ath9k_hw_set_interrupts(ah, 0);
+	ath9k_hw_disable_interrupts(ah);
 
 	ath_drain_all_txq(sc, false);	/* clear pending tx frames */
 
-	spin_lock_bh(&sc->rx.pcu_lock);
-
 	ath_stoprecv(sc);		/* turn off frame recv */
 	ath_flushrecv(sc);		/* flush recv queue */
 
 	if (!ah->curchan)
 		ah->curchan = ath_get_curchannel(sc, hw);
 
-	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 	if (r) {
-		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
-			  "Unable to reset channel (%u MHz), "
-			  "reset status %d\n",
-			  channel->center_freq, r);
+		ath_err(ath9k_hw_common(sc->sc_ah),
+			"Unable to reset channel (%u MHz), reset status %d\n",
+			channel->center_freq, r);
 	}
-	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath9k_hw_phy_disable(ah);
 
-	spin_unlock_bh(&sc->rx.pcu_lock);
-
 	ath9k_hw_configpcipowersave(ah, 1, 1);
+
+	spin_unlock_bh(&sc->sc_pcu_lock);
 	ath9k_ps_restore(sc);
+
 	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 }
 
@@ -978,28 +969,23 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 	/* Stop ANI */
 	del_timer_sync(&common->ani.timer);
 
+	spin_lock_bh(&sc->sc_pcu_lock);
+
 	ieee80211_stop_queues(hw);
 
-	ath9k_hw_set_interrupts(ah, 0);
+	ath9k_hw_disable_interrupts(ah);
 	ath_drain_all_txq(sc, retry_tx);
 
-	spin_lock_bh(&sc->rx.pcu_lock);
-
 	ath_stoprecv(sc);
 	ath_flushrecv(sc);
 
-	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
 	if (r)
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to reset hardware; reset status %d\n", r);
-	spin_unlock_bh(&sc->sc_resetlock);
+		ath_err(common,
+			"Unable to reset hardware; reset status %d\n", r);
 
 	if (ath_startrecv(sc) != 0)
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to start recv logic\n");
-
-	spin_unlock_bh(&sc->rx.pcu_lock);
+		ath_err(common, "Unable to start recv logic\n");
 
 	/*
 	 * We may be doing a reset in response to a request
@@ -1025,6 +1011,7 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 	}
 
 	ieee80211_wake_queues(hw);
+	spin_unlock_bh(&sc->sc_pcu_lock);
 
 	/* Start ANI */
 	ath_start_ani(common);
@@ -1032,56 +1019,6 @@ int ath_reset(struct ath_softc *sc, bool retry_tx)
 	return r;
 }
 
-static int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
-{
-	int qnum;
-
-	switch (queue) {
-	case 0:
-		qnum = sc->tx.hwq_map[WME_AC_VO];
-		break;
-	case 1:
-		qnum = sc->tx.hwq_map[WME_AC_VI];
-		break;
-	case 2:
-		qnum = sc->tx.hwq_map[WME_AC_BE];
-		break;
-	case 3:
-		qnum = sc->tx.hwq_map[WME_AC_BK];
-		break;
-	default:
-		qnum = sc->tx.hwq_map[WME_AC_BE];
-		break;
-	}
-
-	return qnum;
-}
-
-int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
-{
-	int qnum;
-
-	switch (queue) {
-	case WME_AC_VO:
-		qnum = 0;
-		break;
-	case WME_AC_VI:
-		qnum = 1;
-		break;
-	case WME_AC_BE:
-		qnum = 2;
-		break;
-	case WME_AC_BK:
-		qnum = 3;
-		break;
-	default:
-		qnum = -1;
-		break;
-	}
-
-	return qnum;
-}
-
 /* XXX: Remove me once we don't depend on ath9k_channel for all
  * this redundant data */
 void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
@@ -1120,9 +1057,9 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	struct ath9k_channel *init_channel;
 	int r;
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "Starting driver with initial channel: %d MHz\n",
-		  curchan->center_freq);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"Starting driver with initial channel: %d MHz\n",
+		curchan->center_freq);
 
 	mutex_lock(&sc->mutex);
 
@@ -1163,19 +1100,15 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	 * be followed by initialization of the appropriate bits
 	 * and then setup of the interrupt mask.
 	 */
-	spin_lock_bh(&sc->rx.pcu_lock);
-	spin_lock_bh(&sc->sc_resetlock);
+	spin_lock_bh(&sc->sc_pcu_lock);
 	r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
 	if (r) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to reset hardware; reset status %d "
-			  "(freq %u MHz)\n", r,
-			  curchan->center_freq);
-		spin_unlock_bh(&sc->sc_resetlock);
-		spin_unlock_bh(&sc->rx.pcu_lock);
+		ath_err(common,
+			"Unable to reset hardware; reset status %d (freq %u MHz)\n",
+			r, curchan->center_freq);
+		spin_unlock_bh(&sc->sc_pcu_lock);
 		goto mutex_unlock;
 	}
-	spin_unlock_bh(&sc->sc_resetlock);
 
 	/*
 	 * This is needed only to setup initial state
@@ -1191,13 +1124,12 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	 * here except setup the interrupt mask.
 	 */
 	if (ath_startrecv(sc) != 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Unable to start recv logic\n");
+		ath_err(common, "Unable to start recv logic\n");
 		r = -EIO;
-		spin_unlock_bh(&sc->rx.pcu_lock);
+		spin_unlock_bh(&sc->sc_pcu_lock);
 		goto mutex_unlock;
 	}
-	spin_unlock_bh(&sc->rx.pcu_lock);
+	spin_unlock_bh(&sc->sc_pcu_lock);
 
 	/* Setup our intr mask. */
 	ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
@@ -1217,6 +1149,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 		ah->imask |= ATH9K_INT_CST;
 
 	sc->sc_flags &= ~SC_OP_INVALID;
+	sc->sc_ah->is_monitoring = false;
 
 	/* Disable BMISS interrupt when we're not associated */
 	ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
@@ -1238,6 +1171,15 @@ static int ath9k_start(struct ieee80211_hw *hw)
 			ath9k_btcoex_timer_resume(sc);
 	}
 
+	/* User has the option to provide pm-qos value as a module
+	 * parameter rather than using the default value of
+	 * 'ATH9K_PM_QOS_DEFAULT_VALUE'.
+	 */
+	pm_qos_update_request(&sc->pm_qos_req, ath9k_pm_qos_value);
+
+	if (ah->caps.pcie_lcr_extsync_en && common->bus_ops->extn_synch_en)
+		common->bus_ops->extn_synch_en(common);
+
 mutex_unlock:
 	mutex_unlock(&sc->mutex);
 
@@ -1247,19 +1189,16 @@ mutex_unlock:
 static int ath9k_tx(struct ieee80211_hw *hw,
 		    struct sk_buff *skb)
 {
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_tx_control txctl;
-	int padpos, padsize;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
-	int qnum;
 
 	if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
-		ath_print(common, ATH_DBG_XMIT,
-			  "ath9k: %s: TX in unexpected wiphy state "
-			  "%d\n", wiphy_name(hw->wiphy), aphy->state);
+		ath_dbg(common, ATH_DBG_XMIT,
+			"ath9k: %s: TX in unexpected wiphy state %d\n",
+			wiphy_name(hw->wiphy), aphy->state);
 		goto exit;
 	}
 
@@ -1271,8 +1210,8 @@ static int ath9k_tx(struct ieee80211_hw *hw,
 		if (ieee80211_is_data(hdr->frame_control) &&
 		    !ieee80211_is_nullfunc(hdr->frame_control) &&
 		    !ieee80211_has_pm(hdr->frame_control)) {
-			ath_print(common, ATH_DBG_PS, "Add PM=1 for a TX frame "
-				  "while in PS mode\n");
+			ath_dbg(common, ATH_DBG_PS,
+				"Add PM=1 for a TX frame while in PS mode\n");
 			hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
 		}
 	}
@@ -1287,12 +1226,12 @@ static int ath9k_tx(struct ieee80211_hw *hw,
 		if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
 			ath9k_hw_setrxabort(sc->sc_ah, 0);
 		if (ieee80211_is_pspoll(hdr->frame_control)) {
-			ath_print(common, ATH_DBG_PS,
-				  "Sending PS-Poll to pick a buffered frame\n");
+			ath_dbg(common, ATH_DBG_PS,
+				"Sending PS-Poll to pick a buffered frame\n");
 			sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
 		} else {
-			ath_print(common, ATH_DBG_PS,
-				  "Wake up to complete TX\n");
+			ath_dbg(common, ATH_DBG_PS,
+				"Wake up to complete TX\n");
 			sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
 		}
 		/*
@@ -1304,36 +1243,12 @@ static int ath9k_tx(struct ieee80211_hw *hw,
 	}
 
 	memset(&txctl, 0, sizeof(struct ath_tx_control));
+	txctl.txq = sc->tx.txq_map[skb_get_queue_mapping(skb)];
 
-	/*
-	 * As a temporary workaround, assign seq# here; this will likely need
-	 * to be cleaned up to work better with Beacon transmission and virtual
-	 * BSSes.
-	 */
-	if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
-		if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
-			sc->tx.seq_no += 0x10;
-		hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
-		hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
-	}
-
-	/* Add the padding after the header if this is not already done */
-	padpos = ath9k_cmn_padpos(hdr->frame_control);
-	padsize = padpos & 3;
-	if (padsize && skb->len>padpos) {
-		if (skb_headroom(skb) < padsize)
-			return -1;
-		skb_push(skb, padsize);
-		memmove(skb->data, skb->data + padsize, padpos);
-	}
-
-	qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc);
-	txctl.txq = &sc->tx.txq[qnum];
-
-	ath_print(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
+	ath_dbg(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
 
 	if (ath_tx_start(hw, skb, &txctl) != 0) {
-		ath_print(common, ATH_DBG_XMIT, "TX failed\n");
+		ath_dbg(common, ATH_DBG_XMIT, "TX failed\n");
 		goto exit;
 	}
 
@@ -1373,7 +1288,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 	}
 
 	if (sc->sc_flags & SC_OP_INVALID) {
-		ath_print(common, ATH_DBG_ANY, "Device not present\n");
+		ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
 		mutex_unlock(&sc->mutex);
 		return;
 	}
@@ -1392,32 +1307,38 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 			ath9k_btcoex_timer_pause(sc);
 	}
 
+	spin_lock_bh(&sc->sc_pcu_lock);
+
 	/* make sure h/w will not generate any interrupt
 	 * before setting the invalid flag. */
-	ath9k_hw_set_interrupts(ah, 0);
+	ath9k_hw_disable_interrupts(ah);
 
-	spin_lock_bh(&sc->rx.pcu_lock);
 	if (!(sc->sc_flags & SC_OP_INVALID)) {
 		ath_drain_all_txq(sc, false);
 		ath_stoprecv(sc);
 		ath9k_hw_phy_disable(ah);
 	} else
 		sc->rx.rxlink = NULL;
-	spin_unlock_bh(&sc->rx.pcu_lock);
 
 	/* disable HAL and put h/w to sleep */
 	ath9k_hw_disable(ah);
 	ath9k_hw_configpcipowersave(ah, 1, 1);
+
+	spin_unlock_bh(&sc->sc_pcu_lock);
+
 	ath9k_ps_restore(sc);
 
-	/* Finally, put the chip in FULL SLEEP mode */
-	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
+	sc->ps_idle = true;
+	ath9k_set_wiphy_idle(aphy, true);
+	ath_radio_disable(sc, hw);
 
 	sc->sc_flags |= SC_OP_INVALID;
 
+	pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE);
+
 	mutex_unlock(&sc->mutex);
 
-	ath_print(common, ATH_DBG_CONFIG, "Driver halt\n");
+	ath_dbg(common, ATH_DBG_CONFIG, "Driver halt\n");
 }
 
 static int ath9k_add_interface(struct ieee80211_hw *hw,
@@ -1450,14 +1371,14 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 		ic_opmode = vif->type;
 		break;
 	default:
-		ath_print(common, ATH_DBG_FATAL,
-			"Interface type %d not yet supported\n", vif->type);
+		ath_err(common, "Interface type %d not yet supported\n",
+			vif->type);
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "Attach a VIF of type: %d\n", ic_opmode);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"Attach a VIF of type: %d\n", ic_opmode);
 
 	/* Set the VIF opmode */
 	avp->av_opmode = ic_opmode;
@@ -1493,8 +1414,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 	ath9k_hw_set_interrupts(ah, ah->imask);
 
 	if (vif->type == NL80211_IFTYPE_AP    ||
-	    vif->type == NL80211_IFTYPE_ADHOC ||
-	    vif->type == NL80211_IFTYPE_MONITOR) {
+	    vif->type == NL80211_IFTYPE_ADHOC) {
 		sc->sc_flags |= SC_OP_ANI_RUN;
 		ath_start_ani(common);
 	}
@@ -1504,16 +1424,83 @@ out:
 	return ret;
 }
 
+static void ath9k_reclaim_beacon(struct ath_softc *sc,
+				 struct ieee80211_vif *vif)
+{
+	struct ath_vif *avp = (void *)vif->drv_priv;
+
+	/* Disable SWBA interrupt */
+	sc->sc_ah->imask &= ~ATH9K_INT_SWBA;
+	ath9k_ps_wakeup(sc);
+	ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
+	ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
+	tasklet_kill(&sc->bcon_tasklet);
+	ath9k_ps_restore(sc);
+
+	ath_beacon_return(sc, avp);
+	sc->sc_flags &= ~SC_OP_BEACONS;
+
+	if (sc->nbcnvifs > 0) {
+		/* Re-enable beaconing */
+		sc->sc_ah->imask |= ATH9K_INT_SWBA;
+		ath9k_ps_wakeup(sc);
+		ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
+		ath9k_ps_restore(sc);
+	}
+}
+
+static int ath9k_change_interface(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif,
+				  enum nl80211_iftype new_type,
+				  bool p2p)
+{
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	int ret = 0;
+
+	ath_dbg(common, ATH_DBG_CONFIG, "Change Interface\n");
+	mutex_lock(&sc->mutex);
+
+	switch (new_type) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_ADHOC:
+		if (sc->nbcnvifs >= ATH_BCBUF) {
+			ath_err(common, "No beacon slot available\n");
+			ret = -ENOBUFS;
+			goto out;
+		}
+		break;
+	case NL80211_IFTYPE_STATION:
+		/* Stop ANI */
+		sc->sc_flags &= ~SC_OP_ANI_RUN;
+		del_timer_sync(&common->ani.timer);
+		if ((vif->type == NL80211_IFTYPE_AP) ||
+		    (vif->type == NL80211_IFTYPE_ADHOC))
+			ath9k_reclaim_beacon(sc, vif);
+		break;
+	default:
+		ath_err(common, "Interface type %d not yet supported\n",
+				vif->type);
+		ret = -ENOTSUPP;
+		goto out;
+	}
+	vif->type = new_type;
+	vif->p2p = p2p;
+
+out:
+	mutex_unlock(&sc->mutex);
+	return ret;
+}
+
 static void ath9k_remove_interface(struct ieee80211_hw *hw,
 				   struct ieee80211_vif *vif)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	struct ath_vif *avp = (void *)vif->drv_priv;
-	int i;
 
-	ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
+	ath_dbg(common, ATH_DBG_CONFIG, "Detach Interface\n");
 
 	mutex_lock(&sc->mutex);
 
@@ -1524,23 +1511,8 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	/* Reclaim beacon resources */
 	if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
 	    (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
-	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
-		ath9k_ps_wakeup(sc);
-		ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-		ath9k_ps_restore(sc);
-	}
-
-	ath_beacon_return(sc, avp);
-	sc->sc_flags &= ~SC_OP_BEACONS;
-
-	for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
-		if (sc->beacon.bslot[i] == vif) {
-			printk(KERN_DEBUG "%s: vif had allocated beacon "
-			       "slot\n", __func__);
-			sc->beacon.bslot[i] = NULL;
-			sc->beacon.bslot_aphy[i] = NULL;
-		}
-	}
+	    (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT))
+		ath9k_reclaim_beacon(sc, vif);
 
 	sc->nvifs--;
 
@@ -1620,8 +1592,8 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 		if (enable_radio) {
 			sc->ps_idle = false;
 			ath_radio_enable(sc, hw);
-			ath_print(common, ATH_DBG_CONFIG,
-				  "not-idle: enabling radio\n");
+			ath_dbg(common, ATH_DBG_CONFIG,
+				"not-idle: enabling radio\n");
 		}
 	}
 
@@ -1643,9 +1615,13 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 
 	if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
 		if (conf->flags & IEEE80211_CONF_MONITOR) {
-			ath_print(common, ATH_DBG_CONFIG,
-				  "HW opmode set to Monitor mode\n");
-			sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
+			ath_dbg(common, ATH_DBG_CONFIG,
+				"Monitor mode is enabled\n");
+			sc->sc_ah->is_monitoring = true;
+		} else {
+			ath_dbg(common, ATH_DBG_CONFIG,
+				"Monitor mode is disabled\n");
+			sc->sc_ah->is_monitoring = false;
 		}
 	}
 
@@ -1676,14 +1652,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 			goto skip_chan_change;
 		}
 
-		ath_print(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
-			  curchan->center_freq);
+		ath_dbg(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
+			curchan->center_freq);
 
 		/* XXX: remove me eventualy */
 		ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
 
-		ath_update_chainmask(sc, conf_is_ht(conf));
-
 		/* update survey stats for the old channel before switching */
 		spin_lock_irqsave(&common->cc_lock, flags);
 		ath_update_survey_stats(sc);
@@ -1710,8 +1684,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 		}
 
 		if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "Unable to set channel\n");
+			ath_err(common, "Unable to set channel\n");
 			mutex_unlock(&sc->mutex);
 			return -EINVAL;
 		}
@@ -1736,7 +1709,7 @@ skip_chan_change:
 	spin_unlock_bh(&sc->wiphy_lock);
 
 	if (disable_radio) {
-		ath_print(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
+		ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
 		sc->ps_idle = true;
 		ath_radio_disable(sc, hw);
 	}
@@ -1775,8 +1748,8 @@ static void ath9k_configure_filter(struct ieee80211_hw *hw,
 	ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
 	ath9k_ps_restore(sc);
 
-	ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
-		  "Set HW RX filter: 0x%x\n", rfilt);
+	ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
+		"Set HW RX filter: 0x%x\n", rfilt);
 }
 
 static int ath9k_sta_add(struct ieee80211_hw *hw,
@@ -1809,12 +1782,15 @@ static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	struct ath_txq *txq;
 	struct ath9k_tx_queue_info qi;
-	int ret = 0, qnum;
+	int ret = 0;
 
 	if (queue >= WME_NUM_AC)
 		return 0;
 
+	txq = sc->tx.txq_map[queue];
+
 	mutex_lock(&sc->mutex);
 
 	memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
@@ -1823,20 +1799,18 @@ static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	qi.tqi_cwmin = params->cw_min;
 	qi.tqi_cwmax = params->cw_max;
 	qi.tqi_burstTime = params->txop;
-	qnum = ath_get_hal_qnum(queue, sc);
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "Configure tx [queue/halq] [%d/%d],  "
-		  "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
-		  queue, qnum, params->aifs, params->cw_min,
-		  params->cw_max, params->txop);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"Configure tx [queue/halq] [%d/%d], aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
+		queue, txq->axq_qnum, params->aifs, params->cw_min,
+		params->cw_max, params->txop);
 
-	ret = ath_txq_update(sc, qnum, &qi);
+	ret = ath_txq_update(sc, txq->axq_qnum, &qi);
 	if (ret)
-		ath_print(common, ATH_DBG_FATAL, "TXQ Update failed\n");
+		ath_err(common, "TXQ Update failed\n");
 
 	if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
-		if ((qnum == sc->tx.hwq_map[WME_AC_BE]) && !ret)
+		if (queue == WME_AC_BE && !ret)
 			ath_beaconq_config(sc);
 
 	mutex_unlock(&sc->mutex);
@@ -1855,12 +1829,12 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int ret = 0;
 
-	if (modparam_nohwcrypt)
+	if (ath9k_modparam_nohwcrypt)
 		return -ENOSPC;
 
 	mutex_lock(&sc->mutex);
 	ath9k_ps_wakeup(sc);
-	ath_print(common, ATH_DBG_CONFIG, "Set HW Key\n");
+	ath_dbg(common, ATH_DBG_CONFIG, "Set HW Key\n");
 
 	switch (cmd) {
 	case SET_KEY:
@@ -1915,13 +1889,8 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 		/* Set aggregation protection mode parameters */
 		sc->config.ath_aggr_prot = 0;
 
-		/* Only legacy IBSS for now */
-		if (vif->type == NL80211_IFTYPE_ADHOC)
-			ath_update_chainmask(sc, 0);
-
-		ath_print(common, ATH_DBG_CONFIG,
-			  "BSSID: %pM aid: 0x%x\n",
-			  common->curbssid, common->curaid);
+		ath_dbg(common, ATH_DBG_CONFIG, "BSSID: %pM aid: 0x%x\n",
+			common->curbssid, common->curaid);
 
 		/* need to reconfigure the beacon */
 		sc->sc_flags &= ~SC_OP_BEACONS ;
@@ -1977,8 +1946,8 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
-		ath_print(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
-			  bss_conf->use_short_preamble);
+		ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
+			bss_conf->use_short_preamble);
 		if (bss_conf->use_short_preamble)
 			sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
 		else
@@ -1986,8 +1955,8 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
-		ath_print(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
-			  bss_conf->use_cts_prot);
+		ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
+			bss_conf->use_cts_prot);
 		if (bss_conf->use_cts_prot &&
 		    hw->conf.channel->band != IEEE80211_BAND_5GHZ)
 			sc->sc_flags |= SC_OP_PROTECT_ENABLE;
@@ -1996,9 +1965,9 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_ASSOC) {
-		ath_print(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
+		ath_dbg(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
 			bss_conf->assoc);
-		ath9k_bss_assoc_info(sc, vif, bss_conf);
+		ath9k_bss_assoc_info(sc, hw, vif, bss_conf);
 	}
 
 	mutex_unlock(&sc->mutex);
@@ -2011,7 +1980,9 @@ static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
 	struct ath_softc *sc = aphy->sc;
 
 	mutex_lock(&sc->mutex);
+	ath9k_ps_wakeup(sc);
 	tsf = ath9k_hw_gettsf64(sc->sc_ah);
+	ath9k_ps_restore(sc);
 	mutex_unlock(&sc->mutex);
 
 	return tsf;
@@ -2023,7 +1994,9 @@ static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
 	struct ath_softc *sc = aphy->sc;
 
 	mutex_lock(&sc->mutex);
+	ath9k_ps_wakeup(sc);
 	ath9k_hw_settsf64(sc->sc_ah, tsf);
+	ath9k_ps_restore(sc);
 	mutex_unlock(&sc->mutex);
 }
 
@@ -2061,6 +2034,9 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 	case IEEE80211_AMPDU_RX_STOP:
 		break;
 	case IEEE80211_AMPDU_TX_START:
+		if (!(sc->sc_flags & SC_OP_TXAGGR))
+			return -EOPNOTSUPP;
+
 		ath9k_ps_wakeup(sc);
 		ret = ath_tx_aggr_start(sc, sta, tid, ssn);
 		if (!ret)
@@ -2079,8 +2055,7 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw,
 		ath9k_ps_restore(sc);
 		break;
 	default:
-		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
-			  "Unknown AMPDU action\n");
+		ath_err(ath9k_hw_common(sc->sc_ah), "Unknown AMPDU action\n");
 	}
 
 	local_bh_enable();
@@ -2180,6 +2155,7 @@ struct ieee80211_ops ath9k_ops = {
 	.start 		    = ath9k_start,
 	.stop 		    = ath9k_stop,
 	.add_interface 	    = ath9k_add_interface,
+	.change_interface   = ath9k_change_interface,
 	.remove_interface   = ath9k_remove_interface,
 	.config 	    = ath9k_config,
 	.configure_filter   = ath9k_configure_filter,
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index b5b651413e7..78ef1f13386 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -16,6 +16,7 @@
 
 #include <linux/nl80211.h>
 #include <linux/pci.h>
+#include <linux/ath9k_platform.h>
 #include "ath9k.h"
 
 static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
@@ -29,6 +30,7 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = {
 	{ PCI_VDEVICE(ATHEROS, 0x002D) }, /* PCI   */
 	{ PCI_VDEVICE(ATHEROS, 0x002E) }, /* PCI-E */
 	{ PCI_VDEVICE(ATHEROS, 0x0030) }, /* PCI-E  AR9300 */
+	{ PCI_VDEVICE(ATHEROS, 0x0032) }, /* PCI-E  AR9485 */
 	{ 0 }
 };
 
@@ -53,21 +55,35 @@ static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
 
 static bool ath_pci_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 {
-	struct ath_hw *ah = (struct ath_hw *) common->ah;
-
-	common->ops->read(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
-
-	if (!ath9k_hw_wait(ah,
-			   AR_EEPROM_STATUS_DATA,
-			   AR_EEPROM_STATUS_DATA_BUSY |
-			   AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0,
-			   AH_WAIT_TIMEOUT)) {
-		return false;
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	struct ath9k_platform_data *pdata = sc->dev->platform_data;
+
+	if (pdata) {
+		if (off >= (ARRAY_SIZE(pdata->eeprom_data))) {
+			ath_err(common,
+				"%s: eeprom read failed, offset %08x is out of range\n",
+				__func__, off);
+		}
+
+		*data = pdata->eeprom_data[off];
+	} else {
+		struct ath_hw *ah = (struct ath_hw *) common->ah;
+
+		common->ops->read(ah, AR5416_EEPROM_OFFSET +
+				      (off << AR5416_EEPROM_S));
+
+		if (!ath9k_hw_wait(ah,
+				   AR_EEPROM_STATUS_DATA,
+				   AR_EEPROM_STATUS_DATA_BUSY |
+				   AR_EEPROM_STATUS_DATA_PROT_ACCESS, 0,
+				   AH_WAIT_TIMEOUT)) {
+			return false;
+		}
+
+		*data = MS(common->ops->read(ah, AR_EEPROM_STATUS_DATA),
+			   AR_EEPROM_STATUS_DATA_VAL);
 	}
 
-	*data = MS(common->ops->read(ah, AR_EEPROM_STATUS_DATA),
-		   AR_EEPROM_STATUS_DATA_VAL);
-
 	return true;
 }
 
@@ -80,7 +96,7 @@ static void ath_pci_bt_coex_prep(struct ath_common *common)
 	struct pci_dev *pdev = to_pci_dev(sc->dev);
 	u8 aspm;
 
-	if (!pdev->is_pcie)
+	if (!pci_is_pcie(pdev))
 		return;
 
 	pci_read_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, &aspm);
@@ -88,11 +104,23 @@ static void ath_pci_bt_coex_prep(struct ath_common *common)
 	pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
 }
 
+static void ath_pci_extn_synch_enable(struct ath_common *common)
+{
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	struct pci_dev *pdev = to_pci_dev(sc->dev);
+	u8 lnkctl;
+
+	pci_read_config_byte(pdev, sc->sc_ah->caps.pcie_lcr_offset, &lnkctl);
+	lnkctl |= PCI_EXP_LNKCTL_ES;
+	pci_write_config_byte(pdev, sc->sc_ah->caps.pcie_lcr_offset, lnkctl);
+}
+
 static const struct ath_bus_ops ath_pci_bus_ops = {
 	.ath_bus_type = ATH_PCI,
 	.read_cachesize = ath_pci_read_cachesize,
 	.eeprom_read = ath_pci_eeprom_read,
 	.bt_coex_prep = ath_pci_bt_coex_prep,
+	.extn_synch_en = ath_pci_extn_synch_enable,
 };
 
 static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -236,6 +264,8 @@ static void ath_pci_remove(struct pci_dev *pdev)
 	struct ath_softc *sc = aphy->sc;
 	void __iomem *mem = sc->mem;
 
+	if (!is_ath9k_unloaded)
+		sc->sc_ah->ah_flags |= AH_UNPLUGGED;
 	ath9k_deinit_device(sc);
 	free_irq(sc->irq, sc);
 	ieee80211_free_hw(sc->hw);
@@ -247,34 +277,25 @@ static void ath_pci_remove(struct pci_dev *pdev)
 
 #ifdef CONFIG_PM
 
-static int ath_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int ath_pci_suspend(struct device *device)
 {
+	struct pci_dev *pdev = to_pci_dev(device);
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 
 	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
 
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
 	return 0;
 }
 
-static int ath_pci_resume(struct pci_dev *pdev)
+static int ath_pci_resume(struct device *device)
 {
+	struct pci_dev *pdev = to_pci_dev(device);
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	u32 val;
-	int err;
-
-	pci_restore_state(pdev);
-
-	err = pci_enable_device(pdev);
-	if (err)
-		return err;
 
 	/*
 	 * Suspend/Resume resets the PCI configuration space, so we have to
@@ -290,10 +311,38 @@ static int ath_pci_resume(struct pci_dev *pdev)
 			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 	ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
 
+	  /*
+	   * Reset key cache to sane defaults (all entries cleared) instead of
+	   * semi-random values after suspend/resume.
+	   */
+	ath9k_ps_wakeup(sc);
+	ath9k_init_crypto(sc);
+	ath9k_ps_restore(sc);
+
+	sc->ps_idle = true;
+	ath9k_set_wiphy_idle(aphy, true);
+	ath_radio_disable(sc, hw);
+
 	return 0;
 }
 
-#endif /* CONFIG_PM */
+static const struct dev_pm_ops ath9k_pm_ops = {
+	.suspend = ath_pci_suspend,
+	.resume = ath_pci_resume,
+	.freeze = ath_pci_suspend,
+	.thaw = ath_pci_resume,
+	.poweroff = ath_pci_suspend,
+	.restore = ath_pci_resume,
+};
+
+#define ATH9K_PM_OPS	(&ath9k_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define ATH9K_PM_OPS	NULL
+
+#endif /* !CONFIG_PM */
+
 
 MODULE_DEVICE_TABLE(pci, ath_pci_id_table);
 
@@ -302,10 +351,7 @@ static struct pci_driver ath_pci_driver = {
 	.id_table   = ath_pci_id_table,
 	.probe      = ath_pci_probe,
 	.remove     = ath_pci_remove,
-#ifdef CONFIG_PM
-	.suspend    = ath_pci_suspend,
-	.resume     = ath_pci_resume,
-#endif /* CONFIG_PM */
+	.driver.pm  = ATH9K_PM_OPS,
 };
 
 int ath_pci_init(void)
diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index 17969af842f..5e3d7496986 100644
--- a/drivers/net/wireless/ath/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -19,6 +19,7 @@
 
 #define CHANSEL_DIV		15
 #define CHANSEL_2G(_freq)	(((_freq) * 0x10000) / CHANSEL_DIV)
+#define CHANSEL_2G_9485(_freq)	((((_freq) * 0x10000) - 215) / CHANSEL_DIV)
 #define CHANSEL_5G(_freq)	(((_freq) * 0x8000) / CHANSEL_DIV)
 
 #define AR_PHY_BASE     0x9800
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 89978d71617..e45147820ea 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -381,25 +381,6 @@ static const struct ath_rate_table ar5416_11g_ratetable = {
 static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table,
 				struct ieee80211_tx_rate *rate);
 
-static inline int8_t median(int8_t a, int8_t b, int8_t c)
-{
-	if (a >= b) {
-		if (b >= c)
-			return b;
-		else if (a > c)
-			return c;
-		else
-			return a;
-	} else {
-		if (a >= c)
-			return a;
-		else if (b >= c)
-			return c;
-		else
-			return b;
-	}
-}
-
 static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table,
 				   struct ath_rate_priv *ath_rc_priv)
 {
@@ -419,7 +400,7 @@ static void ath_rc_sort_validrates(const struct ath_rate_table *rate_table,
 	}
 }
 
-static void ath_rc_init_valid_txmask(struct ath_rate_priv *ath_rc_priv)
+static void ath_rc_init_valid_rate_idx(struct ath_rate_priv *ath_rc_priv)
 {
 	u8 i;
 
@@ -427,7 +408,7 @@ static void ath_rc_init_valid_txmask(struct ath_rate_priv *ath_rc_priv)
 		ath_rc_priv->valid_rate_index[i] = 0;
 }
 
-static inline void ath_rc_set_valid_txmask(struct ath_rate_priv *ath_rc_priv,
+static inline void ath_rc_set_valid_rate_idx(struct ath_rate_priv *ath_rc_priv,
 					   u8 index, int valid_tx_rate)
 {
 	BUG_ON(index > ath_rc_priv->rate_table_size);
@@ -508,7 +489,7 @@ static u8 ath_rc_init_validrates(struct ath_rate_priv *ath_rc_priv,
 
 			ath_rc_priv->valid_phy_rateidx[phy][valid_rate_count] = i;
 			ath_rc_priv->valid_phy_ratecnt[phy] += 1;
-			ath_rc_set_valid_txmask(ath_rc_priv, i, 1);
+			ath_rc_set_valid_rate_idx(ath_rc_priv, i, 1);
 			hi = i;
 		}
 	}
@@ -551,7 +532,7 @@ static u8 ath_rc_setvalid_rates(struct ath_rate_priv *ath_rc_priv,
 				ath_rc_priv->valid_phy_rateidx[phy]
 					[valid_rate_count] = j;
 				ath_rc_priv->valid_phy_ratecnt[phy] += 1;
-				ath_rc_set_valid_txmask(ath_rc_priv, j, 1);
+				ath_rc_set_valid_rate_idx(ath_rc_priv, j, 1);
 				hi = A_MAX(hi, j);
 			}
 		}
@@ -587,7 +568,7 @@ static u8 ath_rc_setvalid_htrates(struct ath_rate_priv *ath_rc_priv,
 			ath_rc_priv->valid_phy_rateidx[phy]
 				[ath_rc_priv->valid_phy_ratecnt[phy]] = j;
 			ath_rc_priv->valid_phy_ratecnt[phy] += 1;
-			ath_rc_set_valid_txmask(ath_rc_priv, j, 1);
+			ath_rc_set_valid_rate_idx(ath_rc_priv, j, 1);
 			hi = A_MAX(hi, j);
 		}
 	}
@@ -883,7 +864,7 @@ static bool ath_rc_update_per(struct ath_softc *sc,
 	bool state_change = false;
 	int count, n_bad_frames;
 	u8 last_per;
-	static u32 nretry_to_per_lookup[10] = {
+	static const u32 nretry_to_per_lookup[10] = {
 		100 * 0 / 1,
 		100 * 1 / 4,
 		100 * 1 / 2,
@@ -1106,13 +1087,13 @@ static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table,
 				struct ieee80211_tx_rate *rate)
 {
 	int rix = 0, i = 0;
-	int mcs_rix_off[] = { 7, 15, 20, 21, 22, 23 };
+	static const int mcs_rix_off[] = { 7, 15, 20, 21, 22, 23 };
 
 	if (!(rate->flags & IEEE80211_TX_RC_MCS))
 		return rate->idx;
 
 	while (rate->idx > mcs_rix_off[i] &&
-	      i < sizeof(mcs_rix_off)/sizeof(int)) {
+	       i < ARRAY_SIZE(mcs_rix_off)) {
 		rix++; i++;
 	}
 
@@ -1203,7 +1184,7 @@ struct ath_rate_table *ath_choose_rate_table(struct ath_softc *sc,
 			return &ar5416_11na_ratetable;
 		return &ar5416_11a_ratetable;
 	default:
-		ath_print(common, ATH_DBG_CONFIG, "Invalid band\n");
+		ath_dbg(common, ATH_DBG_CONFIG, "Invalid band\n");
 		return NULL;
 	}
 }
@@ -1229,7 +1210,7 @@ static void ath_rc_init(struct ath_softc *sc,
 	}
 
 	/* Determine the valid rates */
-	ath_rc_init_valid_txmask(ath_rc_priv);
+	ath_rc_init_valid_rate_idx(ath_rc_priv);
 
 	for (i = 0; i < WLAN_RC_PHY_MAX; i++) {
 		for (j = 0; j < MAX_TX_RATE_PHY; j++)
@@ -1278,9 +1259,9 @@ static void ath_rc_init(struct ath_softc *sc,
 	ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4];
 	ath_rc_priv->rate_table = rate_table;
 
-	ath_print(common, ATH_DBG_CONFIG,
-		  "RC Initialized with capabilities: 0x%x\n",
-		  ath_rc_priv->ht_cap);
+	ath_dbg(common, ATH_DBG_CONFIG,
+		"RC Initialized with capabilities: 0x%x\n",
+		ath_rc_priv->ht_cap);
 }
 
 static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta,
@@ -1340,7 +1321,7 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hdr *hdr;
-	int final_ts_idx = 0, tx_status = 0, is_underrun = 0;
+	int final_ts_idx = 0, tx_status = 0;
 	int long_retry = 0;
 	__le16 fc;
 	int i;
@@ -1373,32 +1354,17 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
 		tx_info->status.ampdu_len = 1;
 	}
 
-	/*
-	 * If an underrun error is seen assume it as an excessive retry only
-	 * if max frame trigger level has been reached (2 KB for singel stream,
-	 * and 4 KB for dual stream). Adjust the long retry as if the frame was
-	 * tried hw->max_rate_tries times to affect how ratectrl updates PER for
-	 * the failed rate. In case of congestion on the bus penalizing these
-	 * type of underruns should help hardware actually transmit new frames
-	 * successfully by eventually preferring slower rates. This itself
-	 * should also alleviate congestion on the bus.
-	 */
-	if ((tx_info->pad[0] & ATH_TX_INFO_UNDERRUN) &&
-	    (sc->sc_ah->tx_trig_level >= ath_rc_priv->tx_triglevel_max)) {
-		tx_status = 1;
-		is_underrun = 1;
-	}
-
-	if (tx_info->pad[0] & ATH_TX_INFO_XRETRY)
+	if (!(tx_info->flags & IEEE80211_TX_STAT_ACK))
 		tx_status = 1;
 
 	ath_rc_tx_status(sc, ath_rc_priv, tx_info, final_ts_idx, tx_status,
-			 (is_underrun) ? sc->hw->max_rate_tries : long_retry);
+			 long_retry);
 
 	/* Check if aggregation has to be enabled for this tid */
 	if (conf_is_ht(&sc->hw->conf) &&
 	    !(skb->protocol == cpu_to_be16(ETH_P_PAE))) {
-		if (ieee80211_is_data_qos(fc)) {
+		if (ieee80211_is_data_qos(fc) &&
+		    skb_get_queue_mapping(skb) != IEEE80211_AC_VO) {
 			u8 *qc, tid;
 			struct ath_node *an;
 
@@ -1407,7 +1373,7 @@ static void ath_tx_status(void *priv, struct ieee80211_supported_band *sband,
 			an = (struct ath_node *)sta->drv_priv;
 
 			if(ath_tx_aggr_check(sc, an, tid))
-				ieee80211_start_tx_ba_session(sta, tid);
+				ieee80211_start_tx_ba_session(sta, tid, 0);
 		}
 	}
 
@@ -1444,12 +1410,12 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
 		ath_rc_priv->neg_ht_rates.rs_nrates = j;
 	}
 
-	is_cw40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40;
+	is_cw40 = !!(sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
 
 	if (is_cw40)
-		is_sgi = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40;
+		is_sgi = !!(sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40);
 	else if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_SGI_20)
-		is_sgi = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20;
+		is_sgi = !!(sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20);
 
 	/* Choose rate table first */
 
@@ -1468,10 +1434,8 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 	struct ath_rate_priv *ath_rc_priv = priv_sta;
 	const struct ath_rate_table *rate_table = NULL;
 	bool oper_cw40 = false, oper_sgi;
-	bool local_cw40 = (ath_rc_priv->ht_cap & WLAN_RC_40_FLAG) ?
-		true : false;
-	bool local_sgi = (ath_rc_priv->ht_cap & WLAN_RC_SGI_FLAG) ?
-		true : false;
+	bool local_cw40 = !!(ath_rc_priv->ht_cap & WLAN_RC_40_FLAG);
+	bool local_sgi = !!(ath_rc_priv->ht_cap & WLAN_RC_SGI_FLAG);
 
 	/* FIXME: Handle AP mode later when we support CWM */
 
@@ -1499,9 +1463,9 @@ static void ath_rate_update(void *priv, struct ieee80211_supported_band *sband,
 						   oper_cw40, oper_sgi);
 			ath_rc_init(sc, priv_sta, sband, sta, rate_table);
 
-			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
-				  "Operating HT Bandwidth changed to: %d\n",
-				  sc->hw->conf.channel_type);
+			ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
+				"Operating HT Bandwidth changed to: %d\n",
+				sc->hw->conf.channel_type);
 		}
 	}
 }
@@ -1612,13 +1576,11 @@ static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp
 
 	rate_priv = kzalloc(sizeof(struct ath_rate_priv), gfp);
 	if (!rate_priv) {
-		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
-			  "Unable to allocate private rc structure\n");
+		ath_err(ath9k_hw_common(sc->sc_ah),
+			"Unable to allocate private rc structure\n");
 		return NULL;
 	}
 
-	rate_priv->tx_triglevel_max = sc->sc_ah->caps.tx_triglevel_max;
-
 	return rate_priv;
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/rc.h b/drivers/net/wireless/ath/ath9k/rc.h
index 2f46a2266ba..5d984b8acdb 100644
--- a/drivers/net/wireless/ath/ath9k/rc.h
+++ b/drivers/net/wireless/ath/ath9k/rc.h
@@ -195,7 +195,6 @@ struct ath_rc_stats {
  * @rate_max_phy: phy index for the max rate
  * @per: PER for every valid rate in %
  * @probe_interval: interval for ratectrl to probe for other rates
- * @prev_data_rix: rate idx of last data frame
  * @ht_cap: HT capabilities
  * @neg_rates: Negotatied rates
  * @neg_ht_rates: Negotiated HT rates
@@ -214,22 +213,14 @@ struct ath_rate_priv {
 	u32 probe_time;
 	u32 per_down_time;
 	u32 probe_interval;
-	u32 prev_data_rix;
-	u32 tx_triglevel_max;
 	struct ath_rateset neg_rates;
 	struct ath_rateset neg_ht_rates;
-	struct ath_rate_softc *asc;
 	const struct ath_rate_table *rate_table;
 
 	struct dentry *debugfs_rcstats;
 	struct ath_rc_stats rcstats[RATE_TABLE_SIZE];
 };
 
-#define ATH_TX_INFO_FRAME_TYPE_INTERNAL	(1 << 0)
-#define ATH_TX_INFO_FRAME_TYPE_PAUSE	(1 << 1)
-#define ATH_TX_INFO_XRETRY		(1 << 3)
-#define ATH_TX_INFO_UNDERRUN		(1 << 4)
-
 enum ath9k_internal_frame_type {
 	ATH9K_IFT_NOT_INTERNAL,
 	ATH9K_IFT_PAUSE,
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index fddb0129bb5..b2497b8601e 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -165,7 +165,7 @@ static void ath_rx_addbuffer_edma(struct ath_softc *sc,
 	u32 nbuf = 0;
 
 	if (list_empty(&sc->rx.rxbuf)) {
-		ath_print(common, ATH_DBG_QUEUE, "No free rx buf available\n");
+		ath_dbg(common, ATH_DBG_QUEUE, "No free rx buf available\n");
 		return;
 	}
 
@@ -269,7 +269,7 @@ static int ath_rx_edma_init(struct ath_softc *sc, int nbufs)
 				dev_kfree_skb_any(skb);
 				bf->bf_mpdu = NULL;
 				bf->bf_buf_addr = 0;
-				ath_print(common, ATH_DBG_FATAL,
+				ath_err(common,
 					"dma_mapping_error() on RX init\n");
 				error = -ENOMEM;
 				goto rx_init_fail;
@@ -317,7 +317,7 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
 	struct ath_buf *bf;
 	int error = 0;
 
-	spin_lock_init(&sc->rx.pcu_lock);
+	spin_lock_init(&sc->sc_pcu_lock);
 	sc->sc_flags &= ~SC_OP_RXFLUSH;
 	spin_lock_init(&sc->rx.rxbuflock);
 
@@ -327,17 +327,17 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
 		common->rx_bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
 				min(common->cachelsz, (u16)64));
 
-		ath_print(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
-				common->cachelsz, common->rx_bufsize);
+		ath_dbg(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
+			common->cachelsz, common->rx_bufsize);
 
 		/* Initialize rx descriptors */
 
 		error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
 				"rx", nbufs, 1, 0);
 		if (error != 0) {
-			ath_print(common, ATH_DBG_FATAL,
-				  "failed to allocate rx descriptors: %d\n",
-				  error);
+			ath_err(common,
+				"failed to allocate rx descriptors: %d\n",
+				error);
 			goto err;
 		}
 
@@ -358,8 +358,8 @@ int ath_rx_init(struct ath_softc *sc, int nbufs)
 				dev_kfree_skb_any(skb);
 				bf->bf_mpdu = NULL;
 				bf->bf_buf_addr = 0;
-				ath_print(common, ATH_DBG_FATAL,
-					  "dma_mapping_error() on RX init\n");
+				ath_err(common,
+					"dma_mapping_error() on RX init\n");
 				error = -ENOMEM;
 				goto err;
 			}
@@ -441,7 +441,7 @@ u32 ath_calcrxfilter(struct ath_softc *sc)
 	 */
 	if (((sc->sc_ah->opmode != NL80211_IFTYPE_AP) &&
 	     (sc->rx.rxfilter & FIF_PROMISC_IN_BSS)) ||
-	    (sc->sc_ah->opmode == NL80211_IFTYPE_MONITOR))
+	    (sc->sc_ah->is_monitoring))
 		rfilt |= ATH9K_RX_FILTER_PROM;
 
 	if (sc->rx.rxfilter & FIF_CONTROL)
@@ -518,7 +518,7 @@ bool ath_stoprecv(struct ath_softc *sc)
 	bool stopped;
 
 	spin_lock_bh(&sc->rx.rxbuflock);
-	ath9k_hw_stoppcurecv(ah);
+	ath9k_hw_abortpcurecv(ah);
 	ath9k_hw_setrxfilter(ah, 0);
 	stopped = ath9k_hw_stopdmarecv(ah);
 
@@ -528,6 +528,13 @@ bool ath_stoprecv(struct ath_softc *sc)
 		sc->rx.rxlink = NULL;
 	spin_unlock_bh(&sc->rx.rxbuflock);
 
+	if (!(ah->ah_flags & AH_UNPLUGGED) &&
+	    unlikely(!stopped)) {
+		ath_err(ath9k_hw_common(sc->sc_ah),
+			"Could not stop RX, we could be "
+			"confusing the DMA engine when we start RX up\n");
+		ATH_DBG_WARN_ON_ONCE(!stopped);
+	}
 	return stopped;
 }
 
@@ -588,9 +595,8 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 
 	if (sc->ps_flags & PS_BEACON_SYNC) {
 		sc->ps_flags &= ~PS_BEACON_SYNC;
-		ath_print(common, ATH_DBG_PS,
-			  "Reconfigure Beacon timers based on "
-			  "timestamp from the AP\n");
+		ath_dbg(common, ATH_DBG_PS,
+			"Reconfigure Beacon timers based on timestamp from the AP\n");
 		ath_beacon_config(sc, NULL);
 	}
 
@@ -602,8 +608,8 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 		 * a backup trigger for returning into NETWORK SLEEP state,
 		 * so we are waiting for it as well.
 		 */
-		ath_print(common, ATH_DBG_PS, "Received DTIM beacon indicating "
-			  "buffered broadcast/multicast frame(s)\n");
+		ath_dbg(common, ATH_DBG_PS,
+			"Received DTIM beacon indicating buffered broadcast/multicast frame(s)\n");
 		sc->ps_flags |= PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON;
 		return;
 	}
@@ -615,8 +621,8 @@ static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 		 * been delivered.
 		 */
 		sc->ps_flags &= ~PS_WAIT_FOR_CAB;
-		ath_print(common, ATH_DBG_PS,
-			  "PS wait for CAB frames timed out\n");
+		ath_dbg(common, ATH_DBG_PS,
+			"PS wait for CAB frames timed out\n");
 	}
 }
 
@@ -641,15 +647,14 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
 		 * point.
 		 */
 		sc->ps_flags &= ~(PS_WAIT_FOR_CAB | PS_WAIT_FOR_BEACON);
-		ath_print(common, ATH_DBG_PS,
-			  "All PS CAB frames received, back to sleep\n");
+		ath_dbg(common, ATH_DBG_PS,
+			"All PS CAB frames received, back to sleep\n");
 	} else if ((sc->ps_flags & PS_WAIT_FOR_PSPOLL_DATA) &&
 		   !is_multicast_ether_addr(hdr->addr1) &&
 		   !ieee80211_has_morefrags(hdr->frame_control)) {
 		sc->ps_flags &= ~PS_WAIT_FOR_PSPOLL_DATA;
-		ath_print(common, ATH_DBG_PS,
-			  "Going back to sleep after having received "
-			  "PS-Poll data (0x%lx)\n",
+		ath_dbg(common, ATH_DBG_PS,
+			"Going back to sleep after having received PS-Poll data (0x%lx)\n",
 			sc->ps_flags & (PS_WAIT_FOR_BEACON |
 					PS_WAIT_FOR_CAB |
 					PS_WAIT_FOR_PSPOLL_DATA |
@@ -658,8 +663,7 @@ static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
 }
 
 static void ath_rx_send_to_mac80211(struct ieee80211_hw *hw,
-				    struct ath_softc *sc, struct sk_buff *skb,
-				    struct ieee80211_rx_status *rxs)
+				    struct ath_softc *sc, struct sk_buff *skb)
 {
 	struct ieee80211_hdr *hdr;
 
@@ -838,6 +842,10 @@ static bool ath9k_rx_accept(struct ath_common *common,
 			    struct ath_rx_status *rx_stats,
 			    bool *decrypt_error)
 {
+#define is_mc_or_valid_tkip_keyix ((is_mc ||			\
+		(rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && \
+		test_bit(rx_stats->rs_keyix, common->tkip_keymap))))
+
 	struct ath_hw *ah = common->ah;
 	__le16 fc;
 	u8 rx_status_len = ah->caps.rx_status_len;
@@ -879,15 +887,18 @@ static bool ath9k_rx_accept(struct ath_common *common,
 		if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
 			*decrypt_error = true;
 		} else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
+			bool is_mc;
 			/*
 			 * The MIC error bit is only valid if the frame
 			 * is not a control frame or fragment, and it was
 			 * decrypted using a valid TKIP key.
 			 */
+			is_mc = !!is_multicast_ether_addr(hdr->addr1);
+
 			if (!ieee80211_is_ctl(fc) &&
 			    !ieee80211_has_morefrags(fc) &&
 			    !(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
-			    test_bit(rx_stats->rs_keyix, common->tkip_keymap))
+			    is_mc_or_valid_tkip_keyix)
 				rxs->flag |= RX_FLAG_MMIC_ERROR;
 			else
 				rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
@@ -897,7 +908,7 @@ static bool ath9k_rx_accept(struct ath_common *common,
 		 * decryption and MIC failures. For monitor mode,
 		 * we also ignore the CRC error.
 		 */
-		if (ah->opmode == NL80211_IFTYPE_MONITOR) {
+		if (ah->is_monitoring) {
 			if (rx_stats->rs_status &
 			    ~(ATH9K_RXERR_DECRYPT | ATH9K_RXERR_MIC |
 			      ATH9K_RXERR_CRC))
@@ -951,8 +962,9 @@ static int ath9k_process_rate(struct ath_common *common,
 	 * No valid hardware bitrate found -- we should not get here
 	 * because hardware has already validated this frame as OK.
 	 */
-	ath_print(common, ATH_DBG_XMIT, "unsupported hw bitrate detected "
-		  "0x%02x using 1 Mbit\n", rx_stats->rs_rate);
+	ath_dbg(common, ATH_DBG_XMIT,
+		"unsupported hw bitrate detected 0x%02x using 1 Mbit\n",
+		rx_stats->rs_rate);
 
 	return -EINVAL;
 }
@@ -962,36 +974,23 @@ static void ath9k_process_rssi(struct ath_common *common,
 			       struct ieee80211_hdr *hdr,
 			       struct ath_rx_status *rx_stats)
 {
+	struct ath_wiphy *aphy = hw->priv;
 	struct ath_hw *ah = common->ah;
-	struct ieee80211_sta *sta;
-	struct ath_node *an;
-	int last_rssi = ATH_RSSI_DUMMY_MARKER;
+	int last_rssi;
 	__le16 fc;
 
+	if (ah->opmode != NL80211_IFTYPE_STATION)
+		return;
+
 	fc = hdr->frame_control;
+	if (!ieee80211_is_beacon(fc) ||
+	    compare_ether_addr(hdr->addr3, common->curbssid))
+		return;
 
-	rcu_read_lock();
-	/*
-	 * XXX: use ieee80211_find_sta! This requires quite a bit of work
-	 * under the current ath9k virtual wiphy implementation as we have
-	 * no way of tying a vif to wiphy. Typically vifs are attached to
-	 * at least one sdata of a wiphy on mac80211 but with ath9k virtual
-	 * wiphy you'd have to iterate over every wiphy and each sdata.
-	 */
-	if (is_multicast_ether_addr(hdr->addr1))
-		sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr2, NULL);
-	else
-		sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr2, hdr->addr1);
-
-	if (sta) {
-		an = (struct ath_node *) sta->drv_priv;
-		if (rx_stats->rs_rssi != ATH9K_RSSI_BAD &&
-		   !rx_stats->rs_moreaggr)
-			ATH_RSSI_LPF(an->last_rssi, rx_stats->rs_rssi);
-		last_rssi = an->last_rssi;
-	}
-	rcu_read_unlock();
+	if (rx_stats->rs_rssi != ATH9K_RSSI_BAD && !rx_stats->rs_moreaggr)
+		ATH_RSSI_LPF(aphy->last_rssi, rx_stats->rs_rssi);
 
+	last_rssi = aphy->last_rssi;
 	if (likely(last_rssi != ATH_RSSI_DUMMY_MARKER))
 		rx_stats->rs_rssi = ATH_EP_RND(last_rssi,
 					      ATH_RSSI_EP_MULTIPLIER);
@@ -999,8 +998,7 @@ static void ath9k_process_rssi(struct ath_common *common,
 		rx_stats->rs_rssi = 0;
 
 	/* Update Beacon RSSI, this is used by ANI. */
-	if (ieee80211_is_beacon(fc))
-		ah->stats.avgbrssi = rx_stats->rs_rssi;
+	ah->stats.avgbrssi = rx_stats->rs_rssi;
 }
 
 /*
@@ -1630,7 +1628,7 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	/*
-	 * The hw can techncically differ from common->hw when using ath9k
+	 * The hw can technically differ from common->hw when using ath9k
 	 * virtual wiphy so to account for that we iterate over the active
 	 * wiphys and find the appropriate wiphy and therefore hw.
 	 */
@@ -1737,9 +1735,8 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
 			dev_kfree_skb_any(requeue_skb);
 			bf->bf_mpdu = NULL;
 			bf->bf_buf_addr = 0;
-			ath_print(common, ATH_DBG_FATAL,
-				  "dma_mapping_error() on RX\n");
-			ath_rx_send_to_mac80211(hw, sc, skb, rxs);
+			ath_err(common, "dma_mapping_error() on RX\n");
+			ath_rx_send_to_mac80211(hw, sc, skb);
 			break;
 		}
 
@@ -1755,17 +1752,18 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp)
 		}
 
 		spin_lock_irqsave(&sc->sc_pm_lock, flags);
-		if (unlikely(ath9k_check_auto_sleep(sc) ||
-			     (sc->ps_flags & (PS_WAIT_FOR_BEACON |
+
+		if ((sc->ps_flags & (PS_WAIT_FOR_BEACON |
 					      PS_WAIT_FOR_CAB |
-					      PS_WAIT_FOR_PSPOLL_DATA))))
+					      PS_WAIT_FOR_PSPOLL_DATA)) ||
+					unlikely(ath9k_check_auto_sleep(sc)))
 			ath_rx_ps(sc, skb);
 		spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 
 		if (ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB)
 			ath_ant_comb_scan(sc, &rs);
 
-		ath_rx_send_to_mac80211(hw, sc, skb, rxs);
+		ath_rx_send_to_mac80211(hw, sc, skb);
 
 requeue:
 		if (edma) {
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index 42976b0a01c..4df5659c6c1 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -703,6 +703,7 @@
 #define AR_WA_RESET_EN                  (1 << 18) /* Sw Control to enable PCI-Reset to POR (bit 15) */
 #define AR_WA_ANALOG_SHIFT              (1 << 20)
 #define AR_WA_POR_SHORT                 (1 << 21) /* PCI-E Phy reset control */
+#define AR_WA_BIT22			(1 << 22)
 #define AR9285_WA_DEFAULT		0x004a050b
 #define AR9280_WA_DEFAULT           	0x0040073b
 #define AR_WA_DEFAULT               	0x0000073f
@@ -786,6 +787,8 @@
 #define AR_SREV_REVISION_9271_11	1
 #define AR_SREV_VERSION_9300		0x1c0
 #define AR_SREV_REVISION_9300_20	2 /* 2.0 and 2.1 */
+#define AR_SREV_VERSION_9485		0x240
+#define AR_SREV_REVISION_9485_10	0
 
 #define AR_SREV_5416(_ah) \
 	(((_ah)->hw_version.macVersion == AR_SREV_VERSION_5416_PCI) || \
@@ -858,14 +861,24 @@
 	 (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9300) && \
 	  ((_ah)->hw_version.macRev >= AR_SREV_REVISION_9300_20)))
 
+#define AR_SREV_9485(_ah) \
+	(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485))
+#define AR_SREV_9485_10(_ah) \
+	(AR_SREV_9485(_ah) && \
+	 ((_ah)->hw_version.macRev == AR_SREV_REVISION_9485_10))
+
 #define AR_SREV_9285E_20(_ah) \
     (AR_SREV_9285_12_OR_LATER(_ah) && \
      ((REG_READ(_ah, AR_AN_SYNTH9) & 0x7) == 0x1))
 
+enum ath_usb_dev {
+	AR9280_USB = 1, /* AR7010 + AR9280, UB94 */
+	AR9287_USB = 2, /* AR7010 + AR9287, UB95 */
+};
+
 #define AR_DEVID_7010(_ah) \
-	(((_ah)->hw_version.devid == 0x7010) || \
-	 ((_ah)->hw_version.devid == 0x7015) || \
-	 ((_ah)->hw_version.devid == 0x9018))
+	(((_ah)->hw_version.usbdev == AR9280_USB) || \
+	 ((_ah)->hw_version.usbdev == AR9287_USB))
 
 #define AR_RADIO_SREV_MAJOR                   0xf0
 #define AR_RAD5133_SREV_MAJOR                 0xc0
@@ -977,11 +990,13 @@ enum {
 #define AR9287_GPIO_IN_VAL_S                     11
 #define AR9271_GPIO_IN_VAL                       0xFFFF0000
 #define AR9271_GPIO_IN_VAL_S                     16
-#define AR9300_GPIO_IN_VAL                       0x0001FFFF
-#define AR9300_GPIO_IN_VAL_S                     0
 #define AR7010_GPIO_IN_VAL                       0x0000FFFF
 #define AR7010_GPIO_IN_VAL_S                     0
 
+#define AR_GPIO_IN				 0x404c
+#define AR9300_GPIO_IN_VAL                       0x0001FFFF
+#define AR9300_GPIO_IN_VAL_S                     0
+
 #define AR_GPIO_OE_OUT                           (AR_SREV_9300_20_OR_LATER(ah) ? 0x4050 : 0x404c)
 #define AR_GPIO_OE_OUT_DRV                       0x3
 #define AR_GPIO_OE_OUT_DRV_NO                    0x0
@@ -1065,6 +1080,9 @@ enum {
 #define AR_INTR_PRIO_ASYNC_MASK   0x40c8
 #define AR_INTR_PRIO_SYNC_MASK    0x40cc
 #define AR_INTR_PRIO_ASYNC_ENABLE 0x40d4
+#define AR_ENT_OTP		  0x40d8
+#define AR_ENT_OTP_CHAIN2_DISABLE               0x00020000
+#define AR_ENT_OTP_MPSD		0x00800000
 
 #define AR_RTC_9300_PLL_DIV          0x000003ff
 #define AR_RTC_9300_PLL_DIV_S        0
@@ -1102,6 +1120,8 @@ enum {
 #define AR_RTC_PLL_CONTROL \
 	((AR_SREV_9100(ah)) ? (AR_RTC_BASE + 0x0014) : 0x7014)
 
+#define AR_RTC_PLL_CONTROL2	0x703c
+
 #define AR_RTC_PLL_DIV          0x0000001f
 #define AR_RTC_PLL_DIV_S        0
 #define AR_RTC_PLL_DIV2         0x00000020
@@ -1565,6 +1585,7 @@ enum {
 #define AR_PCU_TBTT_PROTECT        0x00200000
 #define AR_PCU_CLEAR_VMF           0x01000000
 #define AR_PCU_CLEAR_BA_VALID      0x04000000
+#define AR_PCU_ALWAYS_PERFORM_KEYSEARCH 0x10000000
 
 #define AR_PCU_BT_ANT_PREVENT_RX   0x00100000
 #define AR_PCU_BT_ANT_PREVENT_RX_S 20
diff --git a/drivers/net/wireless/ath/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c
index ec7cf5ee56b..2dc7095e56d 100644
--- a/drivers/net/wireless/ath/ath9k/virtual.c
+++ b/drivers/net/wireless/ath/ath9k/virtual.c
@@ -107,6 +107,7 @@ int ath9k_wiphy_add(struct ath_softc *sc)
 	aphy->sc = sc;
 	aphy->hw = hw;
 	sc->sec_wiphy[i] = aphy;
+	aphy->last_rssi = ATH_RSSI_DUMMY_MARKER;
 	spin_unlock_bh(&sc->wiphy_lock);
 
 	memcpy(addr, common->macaddr, ETH_ALEN);
@@ -186,7 +187,7 @@ static int ath9k_send_nullfunc(struct ath_wiphy *aphy,
 	info->control.rates[1].idx = -1;
 
 	memset(&txctl, 0, sizeof(struct ath_tx_control));
-	txctl.txq = &sc->tx.txq[sc->tx.hwq_map[WME_AC_VO]];
+	txctl.txq = sc->tx.txq_map[WME_AC_VO];
 	txctl.frame_type = ps ? ATH9K_IFT_PAUSE : ATH9K_IFT_UNPAUSE;
 
 	if (ath_tx_start(aphy->hw, skb, &txctl) != 0)
@@ -287,7 +288,6 @@ void ath9k_wiphy_chan_work(struct work_struct *work)
 	/* sync hw configuration for hw code */
 	common->hw = aphy->hw;
 
-	ath_update_chainmask(sc, sc->chan_is_ht);
 	if (ath_set_channel(sc, aphy->hw,
 			    &sc->sc_ah->channels[sc->chan_idx]) < 0) {
 		printk(KERN_DEBUG "ath9k: Failed to set channel for new "
@@ -304,13 +304,12 @@ void ath9k_wiphy_chan_work(struct work_struct *work)
  * ath9k version of ieee80211_tx_status() for TX frames that are generated
  * internally in the driver.
  */
-void ath9k_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
+void ath9k_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, int ftype)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 
-	if ((tx_info->pad[0] & ATH_TX_INFO_FRAME_TYPE_PAUSE) &&
-	    aphy->state == ATH_WIPHY_PAUSING) {
+	if (ftype == ATH9K_IFT_PAUSE && aphy->state == ATH_WIPHY_PAUSING) {
 		if (!(tx_info->flags & IEEE80211_TX_STAT_ACK)) {
 			printk(KERN_DEBUG "ath9k: %s: no ACK for pause "
 			       "frame\n", wiphy_name(hw->wiphy));
@@ -656,10 +655,9 @@ void ath9k_set_wiphy_idle(struct ath_wiphy *aphy, bool idle)
 	struct ath_softc *sc = aphy->sc;
 
 	aphy->idle = idle;
-	ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
-		  "Marking %s as %s\n",
-		  wiphy_name(aphy->hw->wiphy),
-		  idle ? "idle" : "not-idle");
+	ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
+		"Marking %s as %sidle\n",
+		wiphy_name(aphy->hw->wiphy), idle ? "" : "not-");
 }
 /* Only bother starting a queue on an active virtual wiphy */
 bool ath_mac80211_start_queue(struct ath_softc *sc, u16 skb_queue)
diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c
index 93a8bda09c2..dc862f5e116 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.c
+++ b/drivers/net/wireless/ath/ath9k/wmi.c
@@ -120,17 +120,27 @@ void ath9k_deinit_wmi(struct ath9k_htc_priv *priv)
 	kfree(priv->wmi);
 }
 
-void ath9k_wmi_tasklet(unsigned long data)
+void ath9k_swba_tasklet(unsigned long data)
 {
 	struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *)data;
 	struct ath_common *common = ath9k_hw_common(priv->ah);
 
-	ath_print(common, ATH_DBG_WMI, "SWBA Event received\n");
+	ath_dbg(common, ATH_DBG_WMI, "SWBA Event received\n");
 
 	ath9k_htc_swba(priv, priv->wmi->beacon_pending);
 
 }
 
+void ath9k_fatal_work(struct work_struct *work)
+{
+	struct ath9k_htc_priv *priv = container_of(work, struct ath9k_htc_priv,
+						   fatal_work);
+	struct ath_common *common = ath9k_hw_common(priv->ah);
+
+	ath_dbg(common, ATH_DBG_FATAL, "FATAL Event received, resetting device\n");
+	ath9k_htc_reset(priv);
+}
+
 static void ath9k_wmi_rsp_callback(struct wmi *wmi, struct sk_buff *skb)
 {
 	skb_pull(skb, sizeof(struct wmi_cmd_hdr));
@@ -163,7 +173,11 @@ static void ath9k_wmi_ctrl_rx(void *priv, struct sk_buff *skb,
 		switch (cmd_id) {
 		case WMI_SWBA_EVENTID:
 			wmi->beacon_pending = *(u8 *)wmi_event;
-			tasklet_schedule(&wmi->drv_priv->wmi_tasklet);
+			tasklet_schedule(&wmi->drv_priv->swba_tasklet);
+			break;
+		case WMI_FATAL_EVENTID:
+			ieee80211_queue_work(wmi->drv_priv->hw,
+					     &wmi->drv_priv->fatal_work);
 			break;
 		case WMI_TXRATE_EVENTID:
 #ifdef CONFIG_ATH9K_HTC_DEBUGFS
@@ -250,7 +264,7 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 	int time_left, ret = 0;
 	unsigned long flags;
 
-	if (wmi->drv_priv->op_flags & OP_UNPLUGGED)
+	if (ah->ah_flags & AH_UNPLUGGED)
 		return 0;
 
 	skb = alloc_skb(headroom + cmd_len, GFP_ATOMIC);
@@ -286,9 +300,9 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 
 	time_left = wait_for_completion_timeout(&wmi->cmd_wait, timeout);
 	if (!time_left) {
-		ath_print(common, ATH_DBG_WMI,
-			  "Timeout waiting for WMI command: %s\n",
-			  wmi_cmd_to_name(cmd_id));
+		ath_dbg(common, ATH_DBG_WMI,
+			"Timeout waiting for WMI command: %s\n",
+			wmi_cmd_to_name(cmd_id));
 		mutex_unlock(&wmi->op_mutex);
 		return -ETIMEDOUT;
 	}
@@ -298,8 +312,8 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 	return 0;
 
 out:
-	ath_print(common, ATH_DBG_WMI,
-		  "WMI failure for: %s\n", wmi_cmd_to_name(cmd_id));
+	ath_dbg(common, ATH_DBG_WMI,
+		"WMI failure for: %s\n", wmi_cmd_to_name(cmd_id));
 	mutex_unlock(&wmi->op_mutex);
 	kfree_skb(skb);
 
diff --git a/drivers/net/wireless/ath/ath9k/wmi.h b/drivers/net/wireless/ath/ath9k/wmi.h
index ac61074af8a..42084277522 100644
--- a/drivers/net/wireless/ath/ath9k/wmi.h
+++ b/drivers/net/wireless/ath/ath9k/wmi.h
@@ -117,7 +117,8 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id,
 		  u8 *cmd_buf, u32 cmd_len,
 		  u8 *rsp_buf, u32 rsp_len,
 		  u32 timeout);
-void ath9k_wmi_tasklet(unsigned long data);
+void ath9k_swba_tasklet(unsigned long data);
+void ath9k_fatal_work(struct work_struct *work);
 
 #define WMI_CMD(_wmi_cmd)						\
 	do {								\
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index f2ade2402ce..332d1feb5c1 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -48,19 +48,17 @@ static u16 bits_per_symbol[][2] = {
 
 #define IS_HT_RATE(_rate)     ((_rate) & 0x80)
 
-static void ath_tx_send_ht_normal(struct ath_softc *sc, struct ath_txq *txq,
-				  struct ath_atx_tid *tid,
-				  struct list_head *bf_head);
+static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
+			       struct ath_atx_tid *tid,
+			       struct list_head *bf_head);
 static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
 				struct ath_txq *txq, struct list_head *bf_q,
 				struct ath_tx_status *ts, int txok, int sendbar);
 static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
 			     struct list_head *head);
-static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf);
-static int ath_tx_num_badfrms(struct ath_softc *sc, struct ath_buf *bf,
-			      struct ath_tx_status *ts, int txok);
+static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, int len);
 static void ath_tx_rc_status(struct ath_buf *bf, struct ath_tx_status *ts,
-			     int nbad, int txok, bool update_rc);
+			     int nframes, int nbad, int txok, bool update_rc);
 static void ath_tx_update_baw(struct ath_softc *sc, struct ath_atx_tid *tid,
 			      int seqno);
 
@@ -124,7 +122,7 @@ static void ath_tx_queue_tid(struct ath_txq *txq, struct ath_atx_tid *tid)
 
 static void ath_tx_resume_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
 {
-	struct ath_txq *txq = &sc->tx.txq[tid->ac->qnum];
+	struct ath_txq *txq = tid->ac->txq;
 
 	WARN_ON(!tid->paused);
 
@@ -140,12 +138,21 @@ unlock:
 	spin_unlock_bh(&txq->axq_lock);
 }
 
+static struct ath_frame_info *get_frame_info(struct sk_buff *skb)
+{
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	BUILD_BUG_ON(sizeof(struct ath_frame_info) >
+		     sizeof(tx_info->rate_driver_data));
+	return (struct ath_frame_info *) &tx_info->rate_driver_data[0];
+}
+
 static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
 {
-	struct ath_txq *txq = &sc->tx.txq[tid->ac->qnum];
+	struct ath_txq *txq = tid->ac->txq;
 	struct ath_buf *bf;
 	struct list_head bf_head;
 	struct ath_tx_status ts;
+	struct ath_frame_info *fi;
 
 	INIT_LIST_HEAD(&bf_head);
 
@@ -156,12 +163,15 @@ static void ath_tx_flush_tid(struct ath_softc *sc, struct ath_atx_tid *tid)
 		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
 		list_move_tail(&bf->list, &bf_head);
 
-		if (bf_isretried(bf)) {
-			ath_tx_update_baw(sc, tid, bf->bf_seqno);
+		spin_unlock_bh(&txq->axq_lock);
+		fi = get_frame_info(bf->bf_mpdu);
+		if (fi->retries) {
+			ath_tx_update_baw(sc, tid, fi->seqno);
 			ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0, 0);
 		} else {
-			ath_tx_send_ht_normal(sc, txq, tid, &bf_head);
+			ath_tx_send_normal(sc, txq, tid, &bf_head);
 		}
+		spin_lock_bh(&txq->axq_lock);
 	}
 
 	spin_unlock_bh(&txq->axq_lock);
@@ -184,14 +194,11 @@ static void ath_tx_update_baw(struct ath_softc *sc, struct ath_atx_tid *tid,
 }
 
 static void ath_tx_addto_baw(struct ath_softc *sc, struct ath_atx_tid *tid,
-			     struct ath_buf *bf)
+			     u16 seqno)
 {
 	int index, cindex;
 
-	if (bf_isretried(bf))
-		return;
-
-	index  = ATH_BA_INDEX(tid->seq_start, bf->bf_seqno);
+	index  = ATH_BA_INDEX(tid->seq_start, seqno);
 	cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
 	__set_bit(cindex, tid->tx_buf);
 
@@ -215,6 +222,7 @@ static void ath_tid_drain(struct ath_softc *sc, struct ath_txq *txq,
 	struct ath_buf *bf;
 	struct list_head bf_head;
 	struct ath_tx_status ts;
+	struct ath_frame_info *fi;
 
 	memset(&ts, 0, sizeof(ts));
 	INIT_LIST_HEAD(&bf_head);
@@ -226,8 +234,9 @@ static void ath_tid_drain(struct ath_softc *sc, struct ath_txq *txq,
 		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
 		list_move_tail(&bf->list, &bf_head);
 
-		if (bf_isretried(bf))
-			ath_tx_update_baw(sc, tid, bf->bf_seqno);
+		fi = get_frame_info(bf->bf_mpdu);
+		if (fi->retries)
+			ath_tx_update_baw(sc, tid, fi->seqno);
 
 		spin_unlock(&txq->axq_lock);
 		ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0, 0);
@@ -239,16 +248,15 @@ static void ath_tid_drain(struct ath_softc *sc, struct ath_txq *txq,
 }
 
 static void ath_tx_set_retry(struct ath_softc *sc, struct ath_txq *txq,
-			     struct ath_buf *bf)
+			     struct sk_buff *skb)
 {
-	struct sk_buff *skb;
+	struct ath_frame_info *fi = get_frame_info(skb);
 	struct ieee80211_hdr *hdr;
 
-	bf->bf_state.bf_type |= BUF_RETRY;
-	bf->bf_retries++;
 	TX_STAT_INC(txq->axq_qnum, a_retries);
+	if (fi->retries++ > 0)
+		return;
 
-	skb = bf->bf_mpdu;
 	hdr = (struct ieee80211_hdr *)skb->data;
 	hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_RETRY);
 }
@@ -298,9 +306,41 @@ static struct ath_buf* ath_clone_txbuf(struct ath_softc *sc, struct ath_buf *bf)
 	return tbf;
 }
 
+static void ath_tx_count_frames(struct ath_softc *sc, struct ath_buf *bf,
+			        struct ath_tx_status *ts, int txok,
+			        int *nframes, int *nbad)
+{
+	struct ath_frame_info *fi;
+	u16 seq_st = 0;
+	u32 ba[WME_BA_BMP_SIZE >> 5];
+	int ba_index;
+	int isaggr = 0;
+
+	*nbad = 0;
+	*nframes = 0;
+
+	isaggr = bf_isaggr(bf);
+	if (isaggr) {
+		seq_st = ts->ts_seqnum;
+		memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3);
+	}
+
+	while (bf) {
+		fi = get_frame_info(bf->bf_mpdu);
+		ba_index = ATH_BA_INDEX(seq_st, fi->seqno);
+
+		(*nframes)++;
+		if (!txok || (isaggr && !ATH_BA_ISSET(ba, ba_index)))
+			(*nbad)++;
+
+		bf = bf->bf_next;
+	}
+}
+
+
 static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 				 struct ath_buf *bf, struct list_head *bf_q,
-				 struct ath_tx_status *ts, int txok)
+				 struct ath_tx_status *ts, int txok, bool retry)
 {
 	struct ath_node *an = NULL;
 	struct sk_buff *skb;
@@ -316,7 +356,9 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 	int isaggr, txfail, txpending, sendbar = 0, needreset = 0, nbad = 0;
 	bool rc_update = true;
 	struct ieee80211_tx_rate rates[4];
+	struct ath_frame_info *fi;
 	int nframes;
+	u8 tidno;
 
 	skb = bf->bf_mpdu;
 	hdr = (struct ieee80211_hdr *)skb->data;
@@ -325,7 +367,6 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 	hw = bf->aphy->hw;
 
 	memcpy(rates, tx_info->control.rates, sizeof(rates));
-	nframes = bf->bf_nframes;
 
 	rcu_read_lock();
 
@@ -342,7 +383,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 			    !bf->bf_stale || bf_next != NULL)
 				list_move_tail(&bf->list, &bf_head);
 
-			ath_tx_rc_status(bf, ts, 1, 0, false);
+			ath_tx_rc_status(bf, ts, 1, 1, 0, false);
 			ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
 				0, 0);
 
@@ -352,14 +393,15 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 	}
 
 	an = (struct ath_node *)sta->drv_priv;
-	tid = ATH_AN_2_TID(an, bf->bf_tidno);
+	tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
+	tid = ATH_AN_2_TID(an, tidno);
 
 	/*
 	 * The hardware occasionally sends a tx status for the wrong TID.
 	 * In this case, the BA status cannot be considered valid and all
 	 * subframes need to be retransmitted
 	 */
-	if (bf->bf_tidno != ts->tid)
+	if (tidno != ts->tid)
 		txok = false;
 
 	isaggr = bf_isaggr(bf);
@@ -385,15 +427,16 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 	INIT_LIST_HEAD(&bf_pending);
 	INIT_LIST_HEAD(&bf_head);
 
-	nbad = ath_tx_num_badfrms(sc, bf, ts, txok);
+	ath_tx_count_frames(sc, bf, ts, txok, &nframes, &nbad);
 	while (bf) {
 		txfail = txpending = 0;
 		bf_next = bf->bf_next;
 
 		skb = bf->bf_mpdu;
 		tx_info = IEEE80211_SKB_CB(skb);
+		fi = get_frame_info(skb);
 
-		if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, bf->bf_seqno))) {
+		if (ATH_BA_ISSET(ba, ATH_BA_INDEX(seq_st, fi->seqno))) {
 			/* transmit completion, subframe is
 			 * acked by block ack */
 			acked_cnt++;
@@ -401,10 +444,9 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 			/* transmit completion */
 			acked_cnt++;
 		} else {
-			if (!(tid->state & AGGR_CLEANUP) &&
-			    !bf_last->bf_tx_aborted) {
-				if (bf->bf_retries < ATH_MAX_SW_RETRIES) {
-					ath_tx_set_retry(sc, txq, bf);
+			if (!(tid->state & AGGR_CLEANUP) && retry) {
+				if (fi->retries < ATH_MAX_SW_RETRIES) {
+					ath_tx_set_retry(sc, txq, bf->bf_mpdu);
 					txpending = 1;
 				} else {
 					bf->bf_state.bf_type |= BUF_XRETRY;
@@ -442,16 +484,15 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 			 * block-ack window
 			 */
 			spin_lock_bh(&txq->axq_lock);
-			ath_tx_update_baw(sc, tid, bf->bf_seqno);
+			ath_tx_update_baw(sc, tid, fi->seqno);
 			spin_unlock_bh(&txq->axq_lock);
 
 			if (rc_update && (acked_cnt == 1 || txfail_cnt == 1)) {
 				memcpy(tx_info->control.rates, rates, sizeof(rates));
-				bf->bf_nframes = nframes;
-				ath_tx_rc_status(bf, ts, nbad, txok, true);
+				ath_tx_rc_status(bf, ts, nframes, nbad, txok, true);
 				rc_update = false;
 			} else {
-				ath_tx_rc_status(bf, ts, nbad, txok, false);
+				ath_tx_rc_status(bf, ts, nframes, nbad, txok, false);
 			}
 
 			ath_tx_complete_buf(sc, bf, txq, &bf_head, ts,
@@ -470,14 +511,13 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq,
 					 */
 					if (!tbf) {
 						spin_lock_bh(&txq->axq_lock);
-						ath_tx_update_baw(sc, tid,
-								bf->bf_seqno);
+						ath_tx_update_baw(sc, tid, fi->seqno);
 						spin_unlock_bh(&txq->axq_lock);
 
 						bf->bf_state.bf_type |=
 							BUF_XRETRY;
-						ath_tx_rc_status(bf, ts, nbad,
-								0, false);
+						ath_tx_rc_status(bf, ts, nframes,
+								nbad, 0, false);
 						ath_tx_complete_buf(sc, bf, txq,
 								    &bf_head,
 								    ts, 0, 0);
@@ -611,6 +651,7 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
 	u16 minlen;
 	u8 flags, rix;
 	int width, streams, half_gi, ndelim, mindelim;
+	struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu);
 
 	/* Select standard number of delimiters based on frame length alone */
 	ndelim = ATH_AGGR_GET_NDELIM(frmlen);
@@ -621,7 +662,7 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
 	 * TODO - this could be improved to be dependent on the rate.
 	 *      The hardware can keep up at lower rates, but not higher rates
 	 */
-	if (bf->bf_keytype != ATH9K_KEY_TYPE_CLEAR)
+	if (fi->keyix != ATH9K_TXKEYIX_INVALID)
 		ndelim += ATH_AGGR_ENCRYPTDELIM;
 
 	/*
@@ -665,7 +706,8 @@ static int ath_compute_num_delims(struct ath_softc *sc, struct ath_atx_tid *tid,
 static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 					     struct ath_txq *txq,
 					     struct ath_atx_tid *tid,
-					     struct list_head *bf_q)
+					     struct list_head *bf_q,
+					     int *aggr_len)
 {
 #define PADBYTES(_len) ((4 - ((_len) % 4)) % 4)
 	struct ath_buf *bf, *bf_first, *bf_prev = NULL;
@@ -674,14 +716,16 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 		al_delta, h_baw = tid->baw_size / 2;
 	enum ATH_AGGR_STATUS status = ATH_AGGR_DONE;
 	struct ieee80211_tx_info *tx_info;
+	struct ath_frame_info *fi;
 
 	bf_first = list_first_entry(&tid->buf_q, struct ath_buf, list);
 
 	do {
 		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
+		fi = get_frame_info(bf->bf_mpdu);
 
 		/* do not step over block-ack window */
-		if (!BAW_WITHIN(tid->seq_start, tid->baw_size, bf->bf_seqno)) {
+		if (!BAW_WITHIN(tid->seq_start, tid->baw_size, fi->seqno)) {
 			status = ATH_AGGR_BAW_CLOSED;
 			break;
 		}
@@ -692,7 +736,7 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 		}
 
 		/* do not exceed aggregation limit */
-		al_delta = ATH_AGGR_DELIM_SZ + bf->bf_frmlen;
+		al_delta = ATH_AGGR_DELIM_SZ + fi->framelen;
 
 		if (nframes &&
 		    (aggr_limit < (al + bpad + al_delta + prev_al))) {
@@ -719,14 +763,15 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 		 * Get the delimiters needed to meet the MPDU
 		 * density for this node.
 		 */
-		ndelim = ath_compute_num_delims(sc, tid, bf_first, bf->bf_frmlen);
+		ndelim = ath_compute_num_delims(sc, tid, bf_first, fi->framelen);
 		bpad = PADBYTES(al_delta) + (ndelim << 2);
 
 		bf->bf_next = NULL;
 		ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, 0);
 
 		/* link buffers of this frame to the aggregate */
-		ath_tx_addto_baw(sc, tid, bf);
+		if (!fi->retries)
+			ath_tx_addto_baw(sc, tid, fi->seqno);
 		ath9k_hw_set11n_aggr_middle(sc->sc_ah, bf->bf_desc, ndelim);
 		list_move_tail(&bf->list, bf_q);
 		if (bf_prev) {
@@ -738,8 +783,7 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 
 	} while (!list_empty(&tid->buf_q));
 
-	bf_first->bf_al = al;
-	bf_first->bf_nframes = nframes;
+	*aggr_len = al;
 
 	return status;
 #undef PADBYTES
@@ -750,7 +794,9 @@ static void ath_tx_sched_aggr(struct ath_softc *sc, struct ath_txq *txq,
 {
 	struct ath_buf *bf;
 	enum ATH_AGGR_STATUS status;
+	struct ath_frame_info *fi;
 	struct list_head bf_q;
+	int aggr_len;
 
 	do {
 		if (list_empty(&tid->buf_q))
@@ -758,7 +804,7 @@ static void ath_tx_sched_aggr(struct ath_softc *sc, struct ath_txq *txq,
 
 		INIT_LIST_HEAD(&bf_q);
 
-		status = ath_tx_form_aggr(sc, txq, tid, &bf_q);
+		status = ath_tx_form_aggr(sc, txq, tid, &bf_q, &aggr_len);
 
 		/*
 		 * no frames picked up to be aggregated;
@@ -771,18 +817,20 @@ static void ath_tx_sched_aggr(struct ath_softc *sc, struct ath_txq *txq,
 		bf->bf_lastbf = list_entry(bf_q.prev, struct ath_buf, list);
 
 		/* if only one frame, send as non-aggregate */
-		if (bf->bf_nframes == 1) {
+		if (bf == bf->bf_lastbf) {
+			fi = get_frame_info(bf->bf_mpdu);
+
 			bf->bf_state.bf_type &= ~BUF_AGGR;
 			ath9k_hw_clr11n_aggr(sc->sc_ah, bf->bf_desc);
-			ath_buf_set_rate(sc, bf);
+			ath_buf_set_rate(sc, bf, fi->framelen);
 			ath_tx_txqaddbuf(sc, txq, &bf_q);
 			continue;
 		}
 
 		/* setup first desc of aggregate */
 		bf->bf_state.bf_type |= BUF_AGGR;
-		ath_buf_set_rate(sc, bf);
-		ath9k_hw_set11n_aggr_first(sc->sc_ah, bf->bf_desc, bf->bf_al);
+		ath_buf_set_rate(sc, bf, aggr_len);
+		ath9k_hw_set11n_aggr_first(sc->sc_ah, bf->bf_desc, aggr_len);
 
 		/* anchor last desc of aggregate */
 		ath9k_hw_set11n_aggr_last(sc->sc_ah, bf->bf_lastbf->bf_desc);
@@ -790,7 +838,7 @@ static void ath_tx_sched_aggr(struct ath_softc *sc, struct ath_txq *txq,
 		ath_tx_txqaddbuf(sc, txq, &bf_q);
 		TX_STAT_INC(txq->axq_qnum, a_aggr);
 
-	} while (txq->axq_depth < ATH_AGGR_MIN_QDEPTH &&
+	} while (txq->axq_ampdu_depth < ATH_AGGR_MIN_QDEPTH &&
 		 status != ATH_AGGR_BAW_CLOSED);
 }
 
@@ -817,7 +865,7 @@ void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
 {
 	struct ath_node *an = (struct ath_node *)sta->drv_priv;
 	struct ath_atx_tid *txtid = ATH_AN_2_TID(an, tid);
-	struct ath_txq *txq = &sc->tx.txq[txtid->ac->qnum];
+	struct ath_txq *txq = txtid->ac->txq;
 
 	if (txtid->state & AGGR_CLEANUP)
 		return;
@@ -888,10 +936,16 @@ struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype)
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_tx_queue_info qi;
+	static const int subtype_txq_to_hwq[] = {
+		[WME_AC_BE] = ATH_TXQ_AC_BE,
+		[WME_AC_BK] = ATH_TXQ_AC_BK,
+		[WME_AC_VI] = ATH_TXQ_AC_VI,
+		[WME_AC_VO] = ATH_TXQ_AC_VO,
+	};
 	int qnum, i;
 
 	memset(&qi, 0, sizeof(qi));
-	qi.tqi_subtype = subtype;
+	qi.tqi_subtype = subtype_txq_to_hwq[subtype];
 	qi.tqi_aifs = ATH9K_TXQ_USEDEFAULT;
 	qi.tqi_cwmin = ATH9K_TXQ_USEDEFAULT;
 	qi.tqi_cwmax = ATH9K_TXQ_USEDEFAULT;
@@ -931,22 +985,21 @@ struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype)
 		return NULL;
 	}
 	if (qnum >= ARRAY_SIZE(sc->tx.txq)) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "qnum %u out of range, max %u!\n",
-			  qnum, (unsigned int)ARRAY_SIZE(sc->tx.txq));
+		ath_err(common, "qnum %u out of range, max %zu!\n",
+			qnum, ARRAY_SIZE(sc->tx.txq));
 		ath9k_hw_releasetxqueue(ah, qnum);
 		return NULL;
 	}
 	if (!ATH_TXQ_SETUP(sc, qnum)) {
 		struct ath_txq *txq = &sc->tx.txq[qnum];
 
-		txq->axq_class = subtype;
 		txq->axq_qnum = qnum;
 		txq->axq_link = NULL;
 		INIT_LIST_HEAD(&txq->axq_q);
 		INIT_LIST_HEAD(&txq->axq_acq);
 		spin_lock_init(&txq->axq_lock);
 		txq->axq_depth = 0;
+		txq->axq_ampdu_depth = 0;
 		txq->axq_tx_inprogress = false;
 		sc->tx.txqsetup |= 1<<qnum;
 
@@ -985,8 +1038,8 @@ int ath_txq_update(struct ath_softc *sc, int qnum,
 	qi.tqi_readyTime = qinfo->tqi_readyTime;
 
 	if (!ath9k_hw_set_txq_props(ah, qnum, &qi)) {
-		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
-			  "Unable to update hardware queue %u!\n", qnum);
+		ath_err(ath9k_hw_common(sc->sc_ah),
+			"Unable to update hardware queue %u!\n", qnum);
 		error = -EIO;
 	} else {
 		ath9k_hw_resettxqueue(ah, qnum);
@@ -1016,6 +1069,12 @@ int ath_cabq_update(struct ath_softc *sc)
 	return 0;
 }
 
+static bool bf_is_ampdu_not_probing(struct ath_buf *bf)
+{
+    struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu);
+    return bf_isampdu(bf) && !(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE);
+}
+
 /*
  * Drain a given TX queue (could be Beacon or Data)
  *
@@ -1062,8 +1121,6 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx)
 		}
 
 		lastbf = bf->bf_lastbf;
-		if (!retry_tx)
-			lastbf->bf_tx_aborted = true;
 
 		if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
 			list_cut_position(&bf_head,
@@ -1076,11 +1133,13 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx)
 		}
 
 		txq->axq_depth--;
-
+		if (bf_is_ampdu_not_probing(bf))
+			txq->axq_ampdu_depth--;
 		spin_unlock_bh(&txq->axq_lock);
 
 		if (bf_isampdu(bf))
-			ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, 0);
+			ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, 0,
+					     retry_tx);
 		else
 			ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0, 0);
 	}
@@ -1101,7 +1160,7 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx)
 
 			if (bf_isampdu(bf))
 				ath_tx_complete_aggr(sc, txq, bf, &bf_head,
-						     &ts, 0);
+						     &ts, 0, retry_tx);
 			else
 				ath_tx_complete_buf(sc, bf, txq, &bf_head,
 						    &ts, 0, 0);
@@ -1120,7 +1179,7 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx)
 	}
 }
 
-void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
+bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
 {
 	struct ath_hw *ah = sc->sc_ah;
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
@@ -1128,7 +1187,7 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
 	int i, npend = 0;
 
 	if (sc->sc_flags & SC_OP_INVALID)
-		return;
+		return true;
 
 	/* Stop beacon queue */
 	ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
@@ -1142,25 +1201,15 @@ void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
 		}
 	}
 
-	if (npend) {
-		int r;
-
-		ath_print(common, ATH_DBG_FATAL,
-			  "Failed to stop TX DMA. Resetting hardware!\n");
-
-		spin_lock_bh(&sc->sc_resetlock);
-		r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
-		if (r)
-			ath_print(common, ATH_DBG_FATAL,
-				  "Unable to reset hardware; reset status %d\n",
-				  r);
-		spin_unlock_bh(&sc->sc_resetlock);
-	}
+	if (npend)
+		ath_err(common, "Failed to stop TX DMA!\n");
 
 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_draintxq(sc, &sc->tx.txq[i], retry_tx);
 	}
+
+	return !npend;
 }
 
 void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq)
@@ -1212,24 +1261,6 @@ void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq)
 	}
 }
 
-int ath_tx_setup(struct ath_softc *sc, int haltype)
-{
-	struct ath_txq *txq;
-
-	if (haltype >= ARRAY_SIZE(sc->tx.hwq_map)) {
-		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
-			  "HAL AC %u out of range, max %zu!\n",
-			 haltype, ARRAY_SIZE(sc->tx.hwq_map));
-		return 0;
-	}
-	txq = ath_txq_setup(sc, ATH9K_TX_QUEUE_DATA, haltype);
-	if (txq != NULL) {
-		sc->tx.hwq_map[haltype] = txq->axq_qnum;
-		return 1;
-	} else
-		return 0;
-}
-
 /***********/
 /* TX, DMA */
 /***********/
@@ -1255,8 +1286,8 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
 
 	bf = list_first_entry(head, struct ath_buf, list);
 
-	ath_print(common, ATH_DBG_QUEUE,
-		  "qnum: %d, txq depth: %d\n", txq->axq_qnum, txq->axq_depth);
+	ath_dbg(common, ATH_DBG_QUEUE,
+		"qnum: %d, txq depth: %d\n", txq->axq_qnum, txq->axq_depth);
 
 	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
 		if (txq->axq_depth >= ATH_TXFIFO_DEPTH) {
@@ -1264,47 +1295,45 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
 			return;
 		}
 		if (!list_empty(&txq->txq_fifo[txq->txq_headidx]))
-			ath_print(common, ATH_DBG_XMIT,
-				  "Initializing tx fifo %d which "
-				  "is non-empty\n",
-				  txq->txq_headidx);
+			ath_dbg(common, ATH_DBG_XMIT,
+				"Initializing tx fifo %d which is non-empty\n",
+				txq->txq_headidx);
 		INIT_LIST_HEAD(&txq->txq_fifo[txq->txq_headidx]);
 		list_splice_init(head, &txq->txq_fifo[txq->txq_headidx]);
 		INCR(txq->txq_headidx, ATH_TXFIFO_DEPTH);
 		ath9k_hw_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr);
-		ath_print(common, ATH_DBG_XMIT,
-			  "TXDP[%u] = %llx (%p)\n",
-			  txq->axq_qnum, ito64(bf->bf_daddr), bf->bf_desc);
+		ath_dbg(common, ATH_DBG_XMIT, "TXDP[%u] = %llx (%p)\n",
+			txq->axq_qnum, ito64(bf->bf_daddr), bf->bf_desc);
 	} else {
 		list_splice_tail_init(head, &txq->axq_q);
 
 		if (txq->axq_link == NULL) {
 			ath9k_hw_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr);
-			ath_print(common, ATH_DBG_XMIT,
-					"TXDP[%u] = %llx (%p)\n",
-					txq->axq_qnum, ito64(bf->bf_daddr),
-					bf->bf_desc);
+			ath_dbg(common, ATH_DBG_XMIT, "TXDP[%u] = %llx (%p)\n",
+				txq->axq_qnum, ito64(bf->bf_daddr),
+				bf->bf_desc);
 		} else {
 			*txq->axq_link = bf->bf_daddr;
-			ath_print(common, ATH_DBG_XMIT,
-					"link[%u] (%p)=%llx (%p)\n",
-					txq->axq_qnum, txq->axq_link,
-					ito64(bf->bf_daddr), bf->bf_desc);
+			ath_dbg(common, ATH_DBG_XMIT,
+				"link[%u] (%p)=%llx (%p)\n",
+				txq->axq_qnum, txq->axq_link,
+				ito64(bf->bf_daddr), bf->bf_desc);
 		}
 		ath9k_hw_get_desc_link(ah, bf->bf_lastbf->bf_desc,
 				       &txq->axq_link);
 		ath9k_hw_txstart(ah, txq->axq_qnum);
 	}
 	txq->axq_depth++;
+	if (bf_is_ampdu_not_probing(bf))
+		txq->axq_ampdu_depth++;
 }
 
 static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_atx_tid *tid,
-			      struct list_head *bf_head,
-			      struct ath_tx_control *txctl)
+			      struct ath_buf *bf, struct ath_tx_control *txctl)
 {
-	struct ath_buf *bf;
+	struct ath_frame_info *fi = get_frame_info(bf->bf_mpdu);
+	struct list_head bf_head;
 
-	bf = list_first_entry(bf_head, struct ath_buf, list);
 	bf->bf_state.bf_type |= BUF_AMPDU;
 	TX_STAT_INC(txctl->txq->axq_qnum, a_queued);
 
@@ -1316,56 +1345,47 @@ static void ath_tx_send_ampdu(struct ath_softc *sc, struct ath_atx_tid *tid,
 	 * - h/w queue depth exceeds low water mark
 	 */
 	if (!list_empty(&tid->buf_q) || tid->paused ||
-	    !BAW_WITHIN(tid->seq_start, tid->baw_size, bf->bf_seqno) ||
-	    txctl->txq->axq_depth >= ATH_AGGR_MIN_QDEPTH) {
+	    !BAW_WITHIN(tid->seq_start, tid->baw_size, fi->seqno) ||
+	    txctl->txq->axq_ampdu_depth >= ATH_AGGR_MIN_QDEPTH) {
 		/*
 		 * Add this frame to software queue for scheduling later
 		 * for aggregation.
 		 */
-		list_move_tail(&bf->list, &tid->buf_q);
+		list_add_tail(&bf->list, &tid->buf_q);
 		ath_tx_queue_tid(txctl->txq, tid);
 		return;
 	}
 
+	INIT_LIST_HEAD(&bf_head);
+	list_add(&bf->list, &bf_head);
+
 	/* Add sub-frame to BAW */
-	ath_tx_addto_baw(sc, tid, bf);
+	if (!fi->retries)
+		ath_tx_addto_baw(sc, tid, fi->seqno);
 
 	/* Queue to h/w without aggregation */
-	bf->bf_nframes = 1;
 	bf->bf_lastbf = bf;
-	ath_buf_set_rate(sc, bf);
-	ath_tx_txqaddbuf(sc, txctl->txq, bf_head);
+	ath_buf_set_rate(sc, bf, fi->framelen);
+	ath_tx_txqaddbuf(sc, txctl->txq, &bf_head);
 }
 
-static void ath_tx_send_ht_normal(struct ath_softc *sc, struct ath_txq *txq,
-				  struct ath_atx_tid *tid,
-				  struct list_head *bf_head)
+static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
+			       struct ath_atx_tid *tid,
+			       struct list_head *bf_head)
 {
+	struct ath_frame_info *fi;
 	struct ath_buf *bf;
 
 	bf = list_first_entry(bf_head, struct ath_buf, list);
 	bf->bf_state.bf_type &= ~BUF_AMPDU;
 
 	/* update starting sequence number for subsequent ADDBA request */
-	INCR(tid->seq_start, IEEE80211_SEQ_MAX);
-
-	bf->bf_nframes = 1;
-	bf->bf_lastbf = bf;
-	ath_buf_set_rate(sc, bf);
-	ath_tx_txqaddbuf(sc, txq, bf_head);
-	TX_STAT_INC(txq->axq_qnum, queued);
-}
-
-static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq,
-			       struct list_head *bf_head)
-{
-	struct ath_buf *bf;
-
-	bf = list_first_entry(bf_head, struct ath_buf, list);
+	if (tid)
+		INCR(tid->seq_start, IEEE80211_SEQ_MAX);
 
 	bf->bf_lastbf = bf;
-	bf->bf_nframes = 1;
-	ath_buf_set_rate(sc, bf);
+	fi = get_frame_info(bf->bf_mpdu);
+	ath_buf_set_rate(sc, bf, fi->framelen);
 	ath_tx_txqaddbuf(sc, txq, bf_head);
 	TX_STAT_INC(txq->axq_qnum, queued);
 }
@@ -1393,40 +1413,52 @@ static enum ath9k_pkt_type get_hw_packet_type(struct sk_buff *skb)
 	return htype;
 }
 
-static void assign_aggr_tid_seqno(struct sk_buff *skb,
-				  struct ath_buf *bf)
+static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb,
+			     int framelen)
 {
+	struct ath_wiphy *aphy = hw->priv;
+	struct ath_softc *sc = aphy->sc;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_sta *sta = tx_info->control.sta;
+	struct ieee80211_key_conf *hw_key = tx_info->control.hw_key;
 	struct ieee80211_hdr *hdr;
+	struct ath_frame_info *fi = get_frame_info(skb);
 	struct ath_node *an;
 	struct ath_atx_tid *tid;
-	__le16 fc;
-	u8 *qc;
+	enum ath9k_key_type keytype;
+	u16 seqno = 0;
+	u8 tidno;
 
-	if (!tx_info->control.sta)
-		return;
+	keytype = ath9k_cmn_get_hw_crypto_keytype(skb);
 
-	an = (struct ath_node *)tx_info->control.sta->drv_priv;
 	hdr = (struct ieee80211_hdr *)skb->data;
-	fc = hdr->frame_control;
+	if (sta && ieee80211_is_data_qos(hdr->frame_control) &&
+		conf_is_ht(&hw->conf) && (sc->sc_flags & SC_OP_TXAGGR)) {
+
+		an = (struct ath_node *) sta->drv_priv;
+		tidno = ieee80211_get_qos_ctl(hdr)[0] & IEEE80211_QOS_CTL_TID_MASK;
 
-	if (ieee80211_is_data_qos(fc)) {
-		qc = ieee80211_get_qos_ctl(hdr);
-		bf->bf_tidno = qc[0] & 0xf;
+		/*
+		 * Override seqno set by upper layer with the one
+		 * in tx aggregation state.
+		 */
+		tid = ATH_AN_2_TID(an, tidno);
+		seqno = tid->seq_next;
+		hdr->seq_ctrl = cpu_to_le16(seqno << IEEE80211_SEQ_SEQ_SHIFT);
+		INCR(tid->seq_next, IEEE80211_SEQ_MAX);
 	}
 
-	/*
-	 * For HT capable stations, we save tidno for later use.
-	 * We also override seqno set by upper layer with the one
-	 * in tx aggregation state.
-	 */
-	tid = ATH_AN_2_TID(an, bf->bf_tidno);
-	hdr->seq_ctrl = cpu_to_le16(tid->seq_next << IEEE80211_SEQ_SEQ_SHIFT);
-	bf->bf_seqno = tid->seq_next;
-	INCR(tid->seq_next, IEEE80211_SEQ_MAX);
+	memset(fi, 0, sizeof(*fi));
+	if (hw_key)
+		fi->keyix = hw_key->hw_key_idx;
+	else
+		fi->keyix = ATH9K_TXKEYIX_INVALID;
+	fi->keytype = keytype;
+	fi->framelen = framelen;
+	fi->seqno = seqno;
 }
 
-static int setup_tx_flags(struct sk_buff *skb, bool use_ldpc)
+static int setup_tx_flags(struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	int flags = 0;
@@ -1437,7 +1469,7 @@ static int setup_tx_flags(struct sk_buff *skb, bool use_ldpc)
 	if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
 		flags |= ATH9K_TXDESC_NOACK;
 
-	if (use_ldpc)
+	if (tx_info->flags & IEEE80211_TX_CTL_LDPC)
 		flags |= ATH9K_TXDESC_LDPC;
 
 	return flags;
@@ -1449,13 +1481,11 @@ static int setup_tx_flags(struct sk_buff *skb, bool use_ldpc)
  * width  - 0 for 20 MHz, 1 for 40 MHz
  * half_gi - to use 4us v/s 3.6 us for symbol time
  */
-static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf,
+static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, int pktlen,
 			    int width, int half_gi, bool shortPreamble)
 {
 	u32 nbits, nsymbits, duration, nsymbols;
-	int streams, pktlen;
-
-	pktlen = bf_isaggr(bf) ? bf->bf_al : bf->bf_frmlen;
+	int streams;
 
 	/* find number of symbols: PLCP + data */
 	streams = HT_RC_2_STREAMS(rix);
@@ -1474,7 +1504,19 @@ static u32 ath_pkt_duration(struct ath_softc *sc, u8 rix, struct ath_buf *bf,
 	return duration;
 }
 
-static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
+u8 ath_txchainmask_reduction(struct ath_softc *sc, u8 chainmask, u32 rate)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath9k_channel *curchan = ah->curchan;
+	if ((sc->sc_flags & SC_OP_ENABLE_APM) &&
+			(curchan->channelFlags & CHANNEL_5GHZ) &&
+			(chainmask == 0x7) && (rate < 0x90))
+		return 0x3;
+	else
+		return chainmask;
+}
+
+static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, int len)
 {
 	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath9k_11n_rate_series series[4];
@@ -1514,7 +1556,6 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 
 		rix = rates[i].idx;
 		series[i].Tries = rates[i].count;
-		series[i].ChSel = common->tx_chainmask;
 
 		if ((sc->config.ath_aggr_prot && bf_isaggr(bf)) ||
 		    (rates[i].flags & IEEE80211_TX_RC_USE_RTS_CTS)) {
@@ -1537,14 +1578,16 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 		if (rates[i].flags & IEEE80211_TX_RC_MCS) {
 			/* MCS rates */
 			series[i].Rate = rix | 0x80;
-			series[i].PktDuration = ath_pkt_duration(sc, rix, bf,
+			series[i].ChSel = ath_txchainmask_reduction(sc,
+					common->tx_chainmask, series[i].Rate);
+			series[i].PktDuration = ath_pkt_duration(sc, rix, len,
 				 is_40, is_sgi, is_sp);
 			if (rix < 8 && (tx_info->flags & IEEE80211_TX_CTL_STBC))
 				series[i].RateFlags |= ATH9K_RATESERIES_STBC;
 			continue;
 		}
 
-		/* legcay rates */
+		/* legacy rates */
 		if ((tx_info->band == IEEE80211_BAND_2GHZ) &&
 		    !(rate->flags & IEEE80211_RATE_ERP_G))
 			phy = WLAN_RC_PHY_CCK;
@@ -1560,12 +1603,18 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 			is_sp = false;
 		}
 
+		if (bf->bf_state.bfs_paprd)
+			series[i].ChSel = common->tx_chainmask;
+		else
+			series[i].ChSel = ath_txchainmask_reduction(sc,
+					common->tx_chainmask, series[i].Rate);
+
 		series[i].PktDuration = ath9k_hw_computetxtime(sc->sc_ah,
-			phy, rate->bitrate * 100, bf->bf_frmlen, rix, is_sp);
+			phy, rate->bitrate * 100, len, rix, is_sp);
 	}
 
 	/* For AR5416 - RTS cannot be followed by a frame larger than 8K */
-	if (bf_isaggr(bf) && (bf->bf_al > sc->sc_ah->caps.rts_aggr_limit))
+	if (bf_isaggr(bf) && (len > sc->sc_ah->caps.rts_aggr_limit))
 		flags &= ~ATH9K_TXDESC_RTSENA;
 
 	/* ATH9K_TXDESC_RTSENA and ATH9K_TXDESC_CTSENA are mutually exclusive. */
@@ -1582,67 +1631,29 @@ static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 		ath9k_hw_set11n_burstduration(sc->sc_ah, bf->bf_desc, 8192);
 }
 
-static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
-				struct sk_buff *skb,
-				struct ath_tx_control *txctl)
+static struct ath_buf *ath_tx_setup_buffer(struct ieee80211_hw *hw,
+					   struct ath_txq *txq,
+					   struct sk_buff *skb)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
-	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	int hdrlen;
-	__le16 fc;
-	int padpos, padsize;
-	bool use_ldpc = false;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
+	struct ath_frame_info *fi = get_frame_info(skb);
+	struct ath_buf *bf;
+	struct ath_desc *ds;
+	int frm_type;
 
-	tx_info->pad[0] = 0;
-	switch (txctl->frame_type) {
-	case ATH9K_IFT_NOT_INTERNAL:
-		break;
-	case ATH9K_IFT_PAUSE:
-		tx_info->pad[0] |= ATH_TX_INFO_FRAME_TYPE_PAUSE;
-		/* fall through */
-	case ATH9K_IFT_UNPAUSE:
-		tx_info->pad[0] |= ATH_TX_INFO_FRAME_TYPE_INTERNAL;
-		break;
+	bf = ath_tx_get_buffer(sc);
+	if (!bf) {
+		ath_dbg(common, ATH_DBG_XMIT, "TX buffers are full\n");
+		return NULL;
 	}
-	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
-	fc = hdr->frame_control;
 
 	ATH_TXBUF_RESET(bf);
 
 	bf->aphy = aphy;
-	bf->bf_frmlen = skb->len + FCS_LEN;
-	/* Remove the padding size from bf_frmlen, if any */
-	padpos = ath9k_cmn_padpos(hdr->frame_control);
-	padsize = padpos & 3;
-	if (padsize && skb->len>padpos+padsize) {
-		bf->bf_frmlen -= padsize;
-	}
-
-	if (!txctl->paprd && conf_is_ht(&hw->conf)) {
-		bf->bf_state.bf_type |= BUF_HT;
-		if (tx_info->flags & IEEE80211_TX_CTL_LDPC)
-			use_ldpc = true;
-	}
-
-	bf->bf_state.bfs_paprd = txctl->paprd;
-	if (txctl->paprd)
-		bf->bf_state.bfs_paprd_timestamp = jiffies;
-	bf->bf_flags = setup_tx_flags(skb, use_ldpc);
-
-	bf->bf_keytype = ath9k_cmn_get_hw_crypto_keytype(skb);
-	if (bf->bf_keytype != ATH9K_KEY_TYPE_CLEAR) {
-		bf->bf_frmlen += tx_info->control.hw_key->icv_len;
-		bf->bf_keyix = tx_info->control.hw_key->hw_key_idx;
-	} else {
-		bf->bf_keyix = ATH9K_TXKEYIX_INVALID;
-	}
-
-	if (ieee80211_is_data_qos(fc) && bf_isht(bf) &&
-	    (sc->sc_flags & SC_OP_TXAGGR))
-		assign_aggr_tid_seqno(skb, bf);
-
+	bf->bf_flags = setup_tx_flags(skb);
 	bf->bf_mpdu = skb;
 
 	bf->bf_buf_addr = dma_map_single(sc->dev, skb->data,
@@ -1650,42 +1661,19 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
 	if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
 		bf->bf_mpdu = NULL;
 		bf->bf_buf_addr = 0;
-		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
-			  "dma_mapping_error() on TX\n");
-		return -ENOMEM;
+		ath_err(ath9k_hw_common(sc->sc_ah),
+			"dma_mapping_error() on TX\n");
+		ath_tx_return_buffer(sc, bf);
+		return NULL;
 	}
 
-	bf->bf_tx_aborted = false;
-
-	return 0;
-}
-
-/* FIXME: tx power */
-static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
-			     struct ath_tx_control *txctl)
-{
-	struct sk_buff *skb = bf->bf_mpdu;
-	struct ieee80211_tx_info *tx_info =  IEEE80211_SKB_CB(skb);
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
-	struct ath_node *an = NULL;
-	struct list_head bf_head;
-	struct ath_desc *ds;
-	struct ath_atx_tid *tid;
-	struct ath_hw *ah = sc->sc_ah;
-	int frm_type;
-	__le16 fc;
-
 	frm_type = get_hw_packet_type(skb);
-	fc = hdr->frame_control;
-
-	INIT_LIST_HEAD(&bf_head);
-	list_add_tail(&bf->list, &bf_head);
 
 	ds = bf->bf_desc;
 	ath9k_hw_set_desc_link(ah, ds, 0);
 
-	ath9k_hw_set11n_txdesc(ah, ds, bf->bf_frmlen, frm_type, MAX_RATE_POWER,
-			       bf->bf_keyix, bf->bf_keytype, bf->bf_flags);
+	ath9k_hw_set11n_txdesc(ah, ds, fi->framelen, frm_type, MAX_RATE_POWER,
+			       fi->keyix, fi->keytype, bf->bf_flags);
 
 	ath9k_hw_filltxdesc(ah, ds,
 			    skb->len,	/* segment length */
@@ -1693,42 +1681,53 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
 			    true,	/* last segment */
 			    ds,		/* first descriptor */
 			    bf->bf_buf_addr,
-			    txctl->txq->axq_qnum);
+			    txq->axq_qnum);
+
 
-	if (bf->bf_state.bfs_paprd)
-		ar9003_hw_set_paprd_txdesc(ah, ds, bf->bf_state.bfs_paprd);
+	return bf;
+}
+
+/* FIXME: tx power */
+static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
+			     struct ath_tx_control *txctl)
+{
+	struct sk_buff *skb = bf->bf_mpdu;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	struct list_head bf_head;
+	struct ath_atx_tid *tid = NULL;
+	u8 tidno;
 
 	spin_lock_bh(&txctl->txq->axq_lock);
 
-	if (bf_isht(bf) && (sc->sc_flags & SC_OP_TXAGGR) &&
-	    tx_info->control.sta) {
-		an = (struct ath_node *)tx_info->control.sta->drv_priv;
-		tid = ATH_AN_2_TID(an, bf->bf_tidno);
+	if (ieee80211_is_data_qos(hdr->frame_control) && txctl->an) {
+		tidno = ieee80211_get_qos_ctl(hdr)[0] &
+			IEEE80211_QOS_CTL_TID_MASK;
+		tid = ATH_AN_2_TID(txctl->an, tidno);
 
-		if (!ieee80211_is_data_qos(fc)) {
-			ath_tx_send_normal(sc, txctl->txq, &bf_head);
-			goto tx_done;
-		}
+		WARN_ON(tid->ac->txq != txctl->txq);
+	}
 
-		if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
-			/*
-			 * Try aggregation if it's a unicast data frame
-			 * and the destination is HT capable.
-			 */
-			ath_tx_send_ampdu(sc, tid, &bf_head, txctl);
-		} else {
-			/*
-			 * Send this frame as regular when ADDBA
-			 * exchange is neither complete nor pending.
-			 */
-			ath_tx_send_ht_normal(sc, txctl->txq,
-					      tid, &bf_head);
-		}
+	if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && tid) {
+		/*
+		 * Try aggregation if it's a unicast data frame
+		 * and the destination is HT capable.
+		 */
+		ath_tx_send_ampdu(sc, tid, bf, txctl);
 	} else {
-		ath_tx_send_normal(sc, txctl->txq, &bf_head);
+		INIT_LIST_HEAD(&bf_head);
+		list_add_tail(&bf->list, &bf_head);
+
+		bf->bf_state.bfs_ftype = txctl->frame_type;
+		bf->bf_state.bfs_paprd = txctl->paprd;
+
+		if (bf->bf_state.bfs_paprd)
+			ar9003_hw_set_paprd_txdesc(sc->sc_ah, bf->bf_desc,
+						   bf->bf_state.bfs_paprd);
+
+		ath_tx_send_normal(sc, txctl->txq, tid, &bf_head);
 	}
 
-tx_done:
 	spin_unlock_bh(&txctl->txq->axq_lock);
 }
 
@@ -1736,66 +1735,23 @@ tx_done:
 int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb,
 		 struct ath_tx_control *txctl)
 {
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_sta *sta = info->control.sta;
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_txq *txq = txctl->txq;
 	struct ath_buf *bf;
-	int q, r;
-
-	bf = ath_tx_get_buffer(sc);
-	if (!bf) {
-		ath_print(common, ATH_DBG_XMIT, "TX buffers are full\n");
-		return -1;
-	}
-
-	r = ath_tx_setup_buffer(hw, bf, skb, txctl);
-	if (unlikely(r)) {
-		ath_print(common, ATH_DBG_FATAL, "TX mem alloc failure\n");
-
-		/* upon ath_tx_processq() this TX queue will be resumed, we
-		 * guarantee this will happen by knowing beforehand that
-		 * we will at least have to run TX completionon one buffer
-		 * on the queue */
-		spin_lock_bh(&txq->axq_lock);
-		if (!txq->stopped && txq->axq_depth > 1) {
-			ath_mac80211_stop_queue(sc, skb_get_queue_mapping(skb));
-			txq->stopped = 1;
-		}
-		spin_unlock_bh(&txq->axq_lock);
-
-		ath_tx_return_buffer(sc, bf);
-
-		return r;
-	}
-
-	q = skb_get_queue_mapping(skb);
-	if (q >= 4)
-		q = 0;
-
-	spin_lock_bh(&txq->axq_lock);
-	if (++sc->tx.pending_frames[q] > ATH_MAX_QDEPTH && !txq->stopped) {
-		ath_mac80211_stop_queue(sc, skb_get_queue_mapping(skb));
-		txq->stopped = 1;
-	}
-	spin_unlock_bh(&txq->axq_lock);
-
-	ath_tx_start_dma(sc, bf, txctl);
-
-	return 0;
-}
-
-void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
-	struct ath_wiphy *aphy = hw->priv;
-	struct ath_softc *sc = aphy->sc;
-	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	int padpos, padsize;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct ath_tx_control txctl;
+	int frmlen = skb->len + FCS_LEN;
+	int q;
+
+	/* NOTE:  sta can be NULL according to net/mac80211.h */
+	if (sta)
+		txctl->an = (struct ath_node *)sta->drv_priv;
 
-	memset(&txctl, 0, sizeof(struct ath_tx_control));
+	if (info->control.hw_key)
+		frmlen += info->control.hw_key->icv_len;
 
 	/*
 	 * As a temporary workaround, assign seq# here; this will likely need
@@ -1812,30 +1768,37 @@ void ath_tx_cabq(struct ieee80211_hw *hw, struct sk_buff *skb)
 	/* Add the padding after the header if this is not already done */
 	padpos = ath9k_cmn_padpos(hdr->frame_control);
 	padsize = padpos & 3;
-	if (padsize && skb->len>padpos) {
-		if (skb_headroom(skb) < padsize) {
-			ath_print(common, ATH_DBG_XMIT,
-				  "TX CABQ padding failed\n");
-			dev_kfree_skb_any(skb);
-			return;
-		}
+	if (padsize && skb->len > padpos) {
+		if (skb_headroom(skb) < padsize)
+			return -ENOMEM;
+
 		skb_push(skb, padsize);
 		memmove(skb->data, skb->data + padsize, padpos);
 	}
 
-	txctl.txq = sc->beacon.cabq;
+	setup_frame_info(hw, skb, frmlen);
 
-	ath_print(common, ATH_DBG_XMIT,
-		  "transmitting CABQ packet, skb: %p\n", skb);
+	/*
+	 * At this point, the vif, hw_key and sta pointers in the tx control
+	 * info are no longer valid (overwritten by the ath_frame_info data.
+	 */
+
+	bf = ath_tx_setup_buffer(hw, txctl->txq, skb);
+	if (unlikely(!bf))
+		return -ENOMEM;
 
-	if (ath_tx_start(hw, skb, &txctl) != 0) {
-		ath_print(common, ATH_DBG_XMIT, "CABQ TX failed\n");
-		goto exit;
+	q = skb_get_queue_mapping(skb);
+	spin_lock_bh(&txq->axq_lock);
+	if (txq == sc->tx.txq_map[q] &&
+	    ++txq->pending_frames > ATH_MAX_QDEPTH && !txq->stopped) {
+		ath_mac80211_stop_queue(sc, q);
+		txq->stopped = 1;
 	}
+	spin_unlock_bh(&txq->axq_lock);
 
-	return;
-exit:
-	dev_kfree_skb_any(skb);
+	ath_tx_start_dma(sc, bf, txctl);
+
+	return 0;
 }
 
 /*****************/
@@ -1843,7 +1806,8 @@ exit:
 /*****************/
 
 static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
-			    struct ath_wiphy *aphy, int tx_flags)
+			    struct ath_wiphy *aphy, int tx_flags, int ftype,
+			    struct ath_txq *txq)
 {
 	struct ieee80211_hw *hw = sc->hw;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
@@ -1851,7 +1815,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 	struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
 	int q, padpos, padsize;
 
-	ath_print(common, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb);
+	ath_dbg(common, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb);
 
 	if (aphy)
 		hw = aphy->hw;
@@ -1877,24 +1841,24 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 
 	if (sc->ps_flags & PS_WAIT_FOR_TX_ACK) {
 		sc->ps_flags &= ~PS_WAIT_FOR_TX_ACK;
-		ath_print(common, ATH_DBG_PS,
-			  "Going back to sleep after having "
-			  "received TX status (0x%lx)\n",
+		ath_dbg(common, ATH_DBG_PS,
+			"Going back to sleep after having received TX status (0x%lx)\n",
 			sc->ps_flags & (PS_WAIT_FOR_BEACON |
 					PS_WAIT_FOR_CAB |
 					PS_WAIT_FOR_PSPOLL_DATA |
 					PS_WAIT_FOR_TX_ACK));
 	}
 
-	if (unlikely(tx_info->pad[0] & ATH_TX_INFO_FRAME_TYPE_INTERNAL))
-		ath9k_tx_status(hw, skb);
+	if (unlikely(ftype))
+		ath9k_tx_status(hw, skb, ftype);
 	else {
 		q = skb_get_queue_mapping(skb);
-		if (q >= 4)
-			q = 0;
-
-		if (--sc->tx.pending_frames[q] < 0)
-			sc->tx.pending_frames[q] = 0;
+		if (txq == sc->tx.txq_map[q]) {
+			spin_lock_bh(&txq->axq_lock);
+			if (WARN_ON(--txq->pending_frames < 0))
+				txq->pending_frames = 0;
+			spin_unlock_bh(&txq->axq_lock);
+		}
 
 		ieee80211_tx_status(hw, skb);
 	}
@@ -1922,15 +1886,14 @@ static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
 	bf->bf_buf_addr = 0;
 
 	if (bf->bf_state.bfs_paprd) {
-		if (time_after(jiffies,
-			       bf->bf_state.bfs_paprd_timestamp +
-			       msecs_to_jiffies(ATH_PAPRD_TIMEOUT)))
+		if (!sc->paprd_pending)
 			dev_kfree_skb_any(skb);
 		else
 			complete(&sc->paprd_complete);
 	} else {
-		ath_debug_stat_tx(sc, txq, bf, ts);
-		ath_tx_complete(sc, skb, bf->aphy, tx_flags);
+		ath_debug_stat_tx(sc, bf, ts);
+		ath_tx_complete(sc, skb, bf->aphy, tx_flags,
+				bf->bf_state.bfs_ftype, txq);
 	}
 	/* At this point, skb (bf->bf_mpdu) is consumed...make sure we don't
 	 * accidentally reference it later.
@@ -1945,42 +1908,15 @@ static void ath_tx_complete_buf(struct ath_softc *sc, struct ath_buf *bf,
 	spin_unlock_irqrestore(&sc->tx.txbuflock, flags);
 }
 
-static int ath_tx_num_badfrms(struct ath_softc *sc, struct ath_buf *bf,
-			      struct ath_tx_status *ts, int txok)
-{
-	u16 seq_st = 0;
-	u32 ba[WME_BA_BMP_SIZE >> 5];
-	int ba_index;
-	int nbad = 0;
-	int isaggr = 0;
-
-	if (bf->bf_lastbf->bf_tx_aborted)
-		return 0;
-
-	isaggr = bf_isaggr(bf);
-	if (isaggr) {
-		seq_st = ts->ts_seqnum;
-		memcpy(ba, &ts->ba_low, WME_BA_BMP_SIZE >> 3);
-	}
-
-	while (bf) {
-		ba_index = ATH_BA_INDEX(seq_st, bf->bf_seqno);
-		if (!txok || (isaggr && !ATH_BA_ISSET(ba, ba_index)))
-			nbad++;
-
-		bf = bf->bf_next;
-	}
-
-	return nbad;
-}
-
 static void ath_tx_rc_status(struct ath_buf *bf, struct ath_tx_status *ts,
-			     int nbad, int txok, bool update_rc)
+			     int nframes, int nbad, int txok, bool update_rc)
 {
 	struct sk_buff *skb = bf->bf_mpdu;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hw *hw = bf->aphy->hw;
+	struct ath_softc *sc = bf->aphy->sc;
+	struct ath_hw *ah = sc->sc_ah;
 	u8 i, tx_rateindex;
 
 	if (txok)
@@ -1994,22 +1930,32 @@ static void ath_tx_rc_status(struct ath_buf *bf, struct ath_tx_status *ts,
 	if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && update_rc) {
 		tx_info->flags |= IEEE80211_TX_STAT_AMPDU;
 
-		BUG_ON(nbad > bf->bf_nframes);
+		BUG_ON(nbad > nframes);
 
-		tx_info->status.ampdu_len = bf->bf_nframes;
-		tx_info->status.ampdu_ack_len = bf->bf_nframes - nbad;
+		tx_info->status.ampdu_len = nframes;
+		tx_info->status.ampdu_ack_len = nframes - nbad;
 	}
 
 	if ((ts->ts_status & ATH9K_TXERR_FILT) == 0 &&
 	    (bf->bf_flags & ATH9K_TXDESC_NOACK) == 0 && update_rc) {
-		if (ieee80211_is_data(hdr->frame_control)) {
-			if (ts->ts_flags &
-			    (ATH9K_TX_DATA_UNDERRUN | ATH9K_TX_DELIM_UNDERRUN))
-				tx_info->pad[0] |= ATH_TX_INFO_UNDERRUN;
-			if ((ts->ts_status & ATH9K_TXERR_XRETRY) ||
-			    (ts->ts_status & ATH9K_TXERR_FIFO))
-				tx_info->pad[0] |= ATH_TX_INFO_XRETRY;
-		}
+		/*
+		 * If an underrun error is seen assume it as an excessive
+		 * retry only if max frame trigger level has been reached
+		 * (2 KB for single stream, and 4 KB for dual stream).
+		 * Adjust the long retry as if the frame was tried
+		 * hw->max_rate_tries times to affect how rate control updates
+		 * PER for the failed rate.
+		 * In case of congestion on the bus penalizing this type of
+		 * underruns should help hardware actually transmit new frames
+		 * successfully by eventually preferring slower rates.
+		 * This itself should also alleviate congestion on the bus.
+		 */
+		if (ieee80211_is_data(hdr->frame_control) &&
+		    (ts->ts_flags & (ATH9K_TX_DATA_UNDERRUN |
+		                     ATH9K_TX_DELIM_UNDERRUN)) &&
+		    ah->tx_trig_level >= sc->sc_ah->caps.tx_triglevel_max)
+			tx_info->status.rates[tx_rateindex].count =
+				hw->max_rate_tries;
 	}
 
 	for (i = tx_rateindex + 1; i < hw->max_rates; i++) {
@@ -2020,16 +1966,13 @@ static void ath_tx_rc_status(struct ath_buf *bf, struct ath_tx_status *ts,
 	tx_info->status.rates[tx_rateindex].count = ts->ts_longretry + 1;
 }
 
-static void ath_wake_mac80211_queue(struct ath_softc *sc, struct ath_txq *txq)
+static void ath_wake_mac80211_queue(struct ath_softc *sc, int qnum)
 {
-	int qnum;
-
-	qnum = ath_get_mac80211_qnum(txq->axq_class, sc);
-	if (qnum == -1)
-		return;
+	struct ath_txq *txq;
 
+	txq = sc->tx.txq_map[qnum];
 	spin_lock_bh(&txq->axq_lock);
-	if (txq->stopped && sc->tx.pending_frames[qnum] < ATH_MAX_QDEPTH) {
+	if (txq->stopped && txq->pending_frames < ATH_MAX_QDEPTH) {
 		if (ath_mac80211_start_queue(sc, qnum))
 			txq->stopped = 0;
 	}
@@ -2046,10 +1989,11 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 	struct ath_tx_status ts;
 	int txok;
 	int status;
+	int qnum;
 
-	ath_print(common, ATH_DBG_QUEUE, "tx queue %d (%x), link %p\n",
-		  txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum),
-		  txq->axq_link);
+	ath_dbg(common, ATH_DBG_QUEUE, "tx queue %d (%x), link %p\n",
+		txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum),
+		txq->axq_link);
 
 	for (;;) {
 		spin_lock_bh(&txq->axq_lock);
@@ -2106,6 +2050,9 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 		txq->axq_tx_inprogress = false;
 		if (bf_held)
 			list_del(&bf_held->list);
+
+		if (bf_is_ampdu_not_probing(bf))
+			txq->axq_ampdu_depth--;
 		spin_unlock_bh(&txq->axq_lock);
 
 		if (bf_held)
@@ -2118,15 +2065,19 @@ static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 			 */
 			if (ts.ts_status & ATH9K_TXERR_XRETRY)
 				bf->bf_state.bf_type |= BUF_XRETRY;
-			ath_tx_rc_status(bf, &ts, txok ? 0 : 1, txok, true);
+			ath_tx_rc_status(bf, &ts, 1, txok ? 0 : 1, txok, true);
 		}
 
+		qnum = skb_get_queue_mapping(bf->bf_mpdu);
+
 		if (bf_isampdu(bf))
-			ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, txok);
+			ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, txok,
+					     true);
 		else
 			ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, txok, 0);
 
-		ath_wake_mac80211_queue(sc, txq);
+		if (txq == sc->tx.txq_map[qnum])
+			ath_wake_mac80211_queue(sc, qnum);
 
 		spin_lock_bh(&txq->axq_lock);
 		if (sc->sc_flags & SC_OP_TXAGGR)
@@ -2160,8 +2111,8 @@ static void ath_tx_complete_poll_work(struct work_struct *work)
 		}
 
 	if (needreset) {
-		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_RESET,
-			  "tx hung, resetting the chip\n");
+		ath_dbg(ath9k_hw_common(sc->sc_ah), ATH_DBG_RESET,
+			"tx hung, resetting the chip\n");
 		ath9k_ps_wakeup(sc);
 		ath_reset(sc, true);
 		ath9k_ps_restore(sc);
@@ -2196,14 +2147,15 @@ void ath_tx_edma_tasklet(struct ath_softc *sc)
 	struct list_head bf_head;
 	int status;
 	int txok;
+	int qnum;
 
 	for (;;) {
 		status = ath9k_hw_txprocdesc(ah, NULL, (void *)&txs);
 		if (status == -EINPROGRESS)
 			break;
 		if (status == -EIO) {
-			ath_print(common, ATH_DBG_XMIT,
-				  "Error processing tx status\n");
+			ath_dbg(common, ATH_DBG_XMIT,
+				"Error processing tx status\n");
 			break;
 		}
 
@@ -2229,6 +2181,8 @@ void ath_tx_edma_tasklet(struct ath_softc *sc)
 		INCR(txq->txq_tailidx, ATH_TXFIFO_DEPTH);
 		txq->axq_depth--;
 		txq->axq_tx_inprogress = false;
+		if (bf_is_ampdu_not_probing(bf))
+			txq->axq_ampdu_depth--;
 		spin_unlock_bh(&txq->axq_lock);
 
 		txok = !(txs.ts_status & ATH9K_TXERR_MASK);
@@ -2236,16 +2190,20 @@ void ath_tx_edma_tasklet(struct ath_softc *sc)
 		if (!bf_isampdu(bf)) {
 			if (txs.ts_status & ATH9K_TXERR_XRETRY)
 				bf->bf_state.bf_type |= BUF_XRETRY;
-			ath_tx_rc_status(bf, &txs, txok ? 0 : 1, txok, true);
+			ath_tx_rc_status(bf, &txs, 1, txok ? 0 : 1, txok, true);
 		}
 
+		qnum = skb_get_queue_mapping(bf->bf_mpdu);
+
 		if (bf_isampdu(bf))
-			ath_tx_complete_aggr(sc, txq, bf, &bf_head, &txs, txok);
+			ath_tx_complete_aggr(sc, txq, bf, &bf_head, &txs,
+					     txok, true);
 		else
 			ath_tx_complete_buf(sc, bf, txq, &bf_head,
 					    &txs, txok, 0);
 
-		ath_wake_mac80211_queue(sc, txq);
+		if (txq == sc->tx.txq_map[qnum])
+			ath_wake_mac80211_queue(sc, qnum);
 
 		spin_lock_bh(&txq->axq_lock);
 		if (!list_empty(&txq->txq_fifo_pending)) {
@@ -2310,16 +2268,16 @@ int ath_tx_init(struct ath_softc *sc, int nbufs)
 	error = ath_descdma_setup(sc, &sc->tx.txdma, &sc->tx.txbuf,
 				  "tx", nbufs, 1, 1);
 	if (error != 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Failed to allocate tx descriptors: %d\n", error);
+		ath_err(common,
+			"Failed to allocate tx descriptors: %d\n", error);
 		goto err;
 	}
 
 	error = ath_descdma_setup(sc, &sc->beacon.bdma, &sc->beacon.bbuf,
 				  "beacon", ATH_BCBUF, 1, 1);
 	if (error != 0) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "Failed to allocate beacon descriptors: %d\n", error);
+		ath_err(common,
+			"Failed to allocate beacon descriptors: %d\n", error);
 		goto err;
 	}
 
@@ -2377,7 +2335,7 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an)
 	for (acno = 0, ac = &an->ac[acno];
 	     acno < WME_NUM_AC; acno++, ac++) {
 		ac->sched    = false;
-		ac->qnum = sc->tx.hwq_map[acno];
+		ac->txq = sc->tx.txq_map[acno];
 		INIT_LIST_HEAD(&ac->tid_q);
 	}
 }
@@ -2387,17 +2345,13 @@ void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an)
 	struct ath_atx_ac *ac;
 	struct ath_atx_tid *tid;
 	struct ath_txq *txq;
-	int i, tidno;
+	int tidno;
 
 	for (tidno = 0, tid = &an->tid[tidno];
 	     tidno < WME_NUM_TID; tidno++, tid++) {
-		i = tid->ac->qnum;
-
-		if (!ATH_TXQ_SETUP(sc, i))
-			continue;
 
-		txq = &sc->tx.txq[i];
 		ac = tid->ac;
+		txq = ac->txq;
 
 		spin_lock_bh(&txq->axq_lock);
 
diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h
index 6cf0c9ef47a..d07ff7f2fd9 100644
--- a/drivers/net/wireless/ath/carl9170/carl9170.h
+++ b/drivers/net/wireless/ath/carl9170/carl9170.h
@@ -48,7 +48,7 @@
 #include <linux/usb.h>
 #ifdef CONFIG_CARL9170_LEDS
 #include <linux/leds.h>
-#endif /* CONFIG_CARL170_LEDS */
+#endif /* CONFIG_CARL9170_LEDS */
 #ifdef CONFIG_CARL9170_WPC
 #include <linux/input.h>
 #endif /* CONFIG_CARL9170_WPC */
@@ -215,7 +215,7 @@ enum carl9170_restart_reasons {
 	CARL9170_RR_TOO_MANY_FIRMWARE_ERRORS,
 	CARL9170_RR_WATCHDOG,
 	CARL9170_RR_STUCK_TX,
-	CARL9170_RR_SLOW_SYSTEM,
+	CARL9170_RR_UNRESPONSIVE_DEVICE,
 	CARL9170_RR_COMMAND_TIMEOUT,
 	CARL9170_RR_TOO_MANY_PHY_ERRORS,
 	CARL9170_RR_LOST_RSP,
@@ -287,6 +287,7 @@ struct ar9170 {
 
 	/* reset / stuck frames/queue detection */
 	struct work_struct restart_work;
+	struct work_struct ping_work;
 	unsigned int restart_counter;
 	unsigned long queue_stop_timeout[__AR9170_NUM_TXQ];
 	unsigned long max_queue_stop_timeout[__AR9170_NUM_TXQ];
diff --git a/drivers/net/wireless/ath/carl9170/cmd.c b/drivers/net/wireless/ath/carl9170/cmd.c
index c21f3364bfe..cdfc94c371b 100644
--- a/drivers/net/wireless/ath/carl9170/cmd.c
+++ b/drivers/net/wireless/ath/carl9170/cmd.c
@@ -41,7 +41,7 @@
 
 int carl9170_write_reg(struct ar9170 *ar, const u32 reg, const u32 val)
 {
-	__le32 buf[2] = {
+	const __le32 buf[2] = {
 		cpu_to_le32(reg),
 		cpu_to_le32(val),
 	};
diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c
index ae6c006bbc5..546b4e4ec5e 100644
--- a/drivers/net/wireless/ath/carl9170/fw.c
+++ b/drivers/net/wireless/ath/carl9170/fw.c
@@ -291,7 +291,8 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len)
 
 		if (SUPP(CARL9170FW_WLANTX_CAB)) {
 			ar->hw->wiphy->interface_modes |=
-				BIT(NL80211_IFTYPE_AP);
+				BIT(NL80211_IFTYPE_AP) |
+				BIT(NL80211_IFTYPE_P2P_GO);
 		}
 	}
 
diff --git a/drivers/net/wireless/ath/carl9170/fwcmd.h b/drivers/net/wireless/ath/carl9170/fwcmd.h
index d552166db50..3680dfc70f4 100644
--- a/drivers/net/wireless/ath/carl9170/fwcmd.h
+++ b/drivers/net/wireless/ath/carl9170/fwcmd.h
@@ -97,13 +97,13 @@ struct carl9170_set_key_cmd {
 	__le16		type;
 	u8		macAddr[6];
 	u32		key[4];
-} __packed;
+} __packed __aligned(4);
 #define CARL9170_SET_KEY_CMD_SIZE		28
 
 struct carl9170_disable_key_cmd {
 	__le16		user;
 	__le16		padding;
-} __packed;
+} __packed __aligned(4);
 #define CARL9170_DISABLE_KEY_CMD_SIZE		4
 
 struct carl9170_u32_list {
@@ -206,7 +206,7 @@ struct carl9170_cmd {
 		struct carl9170_rx_filter_cmd	rx_filter;
 		u8 data[CARL9170_MAX_CMD_PAYLOAD_LEN];
 	} __packed;
-} __packed;
+} __packed __aligned(4);
 
 #define	CARL9170_TX_STATUS_QUEUE	3
 #define	CARL9170_TX_STATUS_QUEUE_S	0
@@ -216,6 +216,7 @@ struct carl9170_cmd {
 #define	CARL9170_TX_STATUS_TRIES	(7 << CARL9170_TX_STATUS_TRIES_S)
 #define	CARL9170_TX_STATUS_SUCCESS	0x80
 
+#ifdef __CARL9170FW__
 /*
  * NOTE:
  * Both structs [carl9170_tx_status and _carl9170_tx_status]
@@ -232,6 +233,8 @@ struct carl9170_tx_status {
 	u8 tries:3;
 	u8 success:1;
 } __packed;
+#endif /* __CARL9170FW__ */
+
 struct _carl9170_tx_status {
 	/*
 	 * This version should be immune to all alignment bugs.
@@ -272,13 +275,15 @@ struct carl9170_rsp {
 		struct carl9170_rf_init_result	rf_init_res;
 		struct carl9170_u32_list	rreg_res;
 		struct carl9170_u32_list	echo;
+#ifdef __CARL9170FW__
 		struct carl9170_tx_status	tx_status[0];
+#endif /* __CARL9170FW__ */
 		struct _carl9170_tx_status	_tx_status[0];
 		struct carl9170_gpio		gpio;
 		struct carl9170_tsf_rsp		tsf;
 		struct carl9170_psm		psm;
 		u8 data[CARL9170_MAX_CMD_PAYLOAD_LEN];
 	} __packed;
-} __packed;
+} __packed __aligned(4);
 
 #endif /* __CARL9170_SHARED_FWCMD_H */
diff --git a/drivers/net/wireless/ath/carl9170/hw.h b/drivers/net/wireless/ath/carl9170/hw.h
index 2f471b3f05a..e85df6edfed 100644
--- a/drivers/net/wireless/ath/carl9170/hw.h
+++ b/drivers/net/wireless/ath/carl9170/hw.h
@@ -712,7 +712,8 @@ struct ar9170_stream {
 	__le16 tag;
 
 	u8 payload[0];
-};
+} __packed __aligned(4);
+#define AR9170_STREAM_LEN				4
 
 #define AR9170_MAX_ACKTABLE_ENTRIES			8
 #define AR9170_MAX_VIRTUAL_MAC				7
@@ -736,4 +737,8 @@ struct ar9170_stream {
 
 #define MOD_VAL(reg, value, newvalue)					\
 	(((value) & ~reg) | (((newvalue) << reg##_S) & reg))
+
+#define GET_VAL(reg, value)						\
+	(((value) & reg) >> reg##_S)
+
 #endif	/* __CARL9170_SHARED_HW_H */
diff --git a/drivers/net/wireless/ath/carl9170/mac.c b/drivers/net/wireless/ath/carl9170/mac.c
index 2305bc27151..385cf508479 100644
--- a/drivers/net/wireless/ath/carl9170/mac.c
+++ b/drivers/net/wireless/ath/carl9170/mac.c
@@ -205,8 +205,8 @@ int carl9170_init_mac(struct ar9170 *ar)
 	carl9170_regwrite(AR9170_MAC_REG_BACKOFF_PROTECT, 0x105);
 
 	/* Aggregation MAX number and timeout */
-	carl9170_regwrite(AR9170_MAC_REG_AMPDU_FACTOR, 0xa);
-	carl9170_regwrite(AR9170_MAC_REG_AMPDU_DENSITY, 0x140a00);
+	carl9170_regwrite(AR9170_MAC_REG_AMPDU_FACTOR, 0x8000a);
+	carl9170_regwrite(AR9170_MAC_REG_AMPDU_DENSITY, 0x140a07);
 
 	carl9170_regwrite(AR9170_MAC_REG_FRAMETYPE_FILTER,
 			  AR9170_MAC_FTF_DEFAULTS);
@@ -457,8 +457,9 @@ int carl9170_set_beacon_timers(struct ar9170 *ar)
 
 int carl9170_update_beacon(struct ar9170 *ar, const bool submit)
 {
-	struct sk_buff *skb;
+	struct sk_buff *skb = NULL;
 	struct carl9170_vif_info *cvif;
+	struct ieee80211_tx_info *txinfo;
 	__le32 *data, *old = NULL;
 	u32 word, off, addr, len;
 	int i = 0, err = 0;
@@ -487,7 +488,13 @@ found:
 
 	if (!skb) {
 		err = -ENOMEM;
-		goto out_unlock;
+		goto err_free;
+	}
+
+	txinfo = IEEE80211_SKB_CB(skb);
+	if (txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS) {
+		err = -EINVAL;
+		goto err_free;
 	}
 
 	spin_lock_bh(&ar->beacon_lock);
@@ -504,11 +511,8 @@ found:
 			wiphy_err(ar->hw->wiphy, "beacon does not "
 				  "fit into device memory!\n");
 		}
-
-		spin_unlock_bh(&ar->beacon_lock);
-		dev_kfree_skb_any(skb);
 		err = -EINVAL;
-		goto out_unlock;
+		goto err_unlock;
 	}
 
 	if (len > AR9170_MAC_BCN_LENGTH_MAX) {
@@ -518,22 +522,22 @@ found:
 				 AR9170_MAC_BCN_LENGTH_MAX, len);
 		}
 
-		spin_unlock_bh(&ar->beacon_lock);
-		dev_kfree_skb_any(skb);
 		err = -EMSGSIZE;
-		goto out_unlock;
+		goto err_unlock;
 	}
 
-	carl9170_async_regwrite_begin(ar);
+	i = txinfo->control.rates[0].idx;
+	if (txinfo->band != IEEE80211_BAND_2GHZ)
+		i += 4;
 
-	/* XXX: use skb->cb info */
-	if (ar->hw->conf.channel->band == IEEE80211_BAND_2GHZ) {
-		carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP,
-				((skb->len + FCS_LEN) << (3 + 16)) + 0x0400);
-	} else {
-		carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP,
-				((skb->len + FCS_LEN) << 16) + 0x001b);
-	}
+	word = __carl9170_ratetable[i].hw_value & 0xf;
+	if (i < 4)
+		word |= ((skb->len + FCS_LEN) << (3 + 16)) + 0x0400;
+	else
+		word |= ((skb->len + FCS_LEN) << 16) + 0x0010;
+
+	carl9170_async_regwrite_begin(ar);
+	carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP, word);
 
 	for (i = 0; i < DIV_ROUND_UP(skb->len, 4); i++) {
 		/*
@@ -557,7 +561,7 @@ found:
 		cvif->beacon = skb;
 	spin_unlock_bh(&ar->beacon_lock);
 	if (err)
-		goto out_unlock;
+		goto err_free;
 
 	if (submit) {
 		err = carl9170_bcn_ctrl(ar, cvif->id,
@@ -565,10 +569,18 @@ found:
 					addr, skb->len + FCS_LEN);
 
 		if (err)
-			goto out_unlock;
+			goto err_free;
 	}
 out_unlock:
 	rcu_read_unlock();
+	return 0;
+
+err_unlock:
+	spin_unlock_bh(&ar->beacon_lock);
+
+err_free:
+	rcu_read_unlock();
+	dev_kfree_skb_any(skb);
 	return err;
 }
 
diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c
index 980ae70ea42..870df8c4262 100644
--- a/drivers/net/wireless/ath/carl9170/main.c
+++ b/drivers/net/wireless/ath/carl9170/main.c
@@ -428,6 +428,7 @@ static void carl9170_cancel_worker(struct ar9170 *ar)
 	cancel_delayed_work_sync(&ar->led_work);
 #endif /* CONFIG_CARL9170_LEDS */
 	cancel_work_sync(&ar->ps_work);
+	cancel_work_sync(&ar->ping_work);
 	cancel_work_sync(&ar->ampdu_work);
 }
 
@@ -533,6 +534,21 @@ void carl9170_restart(struct ar9170 *ar, const enum carl9170_restart_reasons r)
 	 */
 }
 
+static void carl9170_ping_work(struct work_struct *work)
+{
+	struct ar9170 *ar = container_of(work, struct ar9170, ping_work);
+	int err;
+
+	if (!IS_STARTED(ar))
+		return;
+
+	mutex_lock(&ar->mutex);
+	err = carl9170_echo_test(ar, 0xdeadbeef);
+	if (err)
+		carl9170_restart(ar, CARL9170_RR_UNRESPONSIVE_DEVICE);
+	mutex_unlock(&ar->mutex);
+}
+
 static int carl9170_init_interface(struct ar9170 *ar,
 				   struct ieee80211_vif *vif)
 {
@@ -647,7 +663,7 @@ init:
 	}
 
 unlock:
-	if (err && (vif_id != -1)) {
+	if (err && (vif_id >= 0)) {
 		vif_priv->active = false;
 		bitmap_release_region(&ar->vif_bitmap, vif_id, 0);
 		ar->vifs--;
@@ -1614,6 +1630,7 @@ void *carl9170_alloc(size_t priv_size)
 		skb_queue_head_init(&ar->tx_pending[i]);
 	}
 	INIT_WORK(&ar->ps_work, carl9170_ps_work);
+	INIT_WORK(&ar->ping_work, carl9170_ping_work);
 	INIT_WORK(&ar->restart_work, carl9170_restart_work);
 	INIT_WORK(&ar->ampdu_work, carl9170_ampdu_work);
 	INIT_DELAYED_WORK(&ar->tx_janitor, carl9170_tx_janitor);
@@ -1631,7 +1648,8 @@ void *carl9170_alloc(size_t priv_size)
 	 * supports these modes. The code which will add the
 	 * additional interface_modes is in fw.c.
 	 */
-	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+				     BIT(NL80211_IFTYPE_P2P_CLIENT);
 
 	hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS |
 		     IEEE80211_HW_REPORTS_TX_ACK_STATUS |
@@ -1828,7 +1846,7 @@ int carl9170_register(struct ar9170 *ar)
 	err = carl9170_led_register(ar);
 	if (err)
 		goto err_unreg;
-#endif /* CONFIG_CAR9L170_LEDS */
+#endif /* CONFIG_CARL9170_LEDS */
 
 #ifdef CONFIG_CARL9170_WPC
 	err = carl9170_register_wps_button(ar);
diff --git a/drivers/net/wireless/ath/carl9170/phy.c b/drivers/net/wireless/ath/carl9170/phy.c
index 89deca37a98..b6b0de60050 100644
--- a/drivers/net/wireless/ath/carl9170/phy.c
+++ b/drivers/net/wireless/ath/carl9170/phy.c
@@ -1029,8 +1029,6 @@ static int carl9170_init_rf_bank4_pwr(struct ar9170 *ar, bool band5ghz,
 	if (err)
 		return err;
 
-	msleep(20);
-
 	return 0;
 }
 
@@ -1554,15 +1552,6 @@ static int carl9170_set_power_cal(struct ar9170 *ar, u32 freq,
 	return carl9170_regwrite_result();
 }
 
-/* TODO: replace this with sign_extend32(noise, 8) */
-static int carl9170_calc_noise_dbm(u32 raw_noise)
-{
-	if (raw_noise & 0x100)
-		return ~0x1ff | raw_noise;
-	else
-		return raw_noise;
-}
-
 int carl9170_get_noisefloor(struct ar9170 *ar)
 {
 	static const u32 phy_regs[] = {
@@ -1578,11 +1567,11 @@ int carl9170_get_noisefloor(struct ar9170 *ar)
 		return err;
 
 	for (i = 0; i < 2; i++) {
-		ar->noise[i] = carl9170_calc_noise_dbm(
-			(phy_res[i] >> 19) & 0x1ff);
+		ar->noise[i] = sign_extend32(GET_VAL(
+			AR9170_PHY_CCA_MIN_PWR, phy_res[i]), 8);
 
-		ar->noise[i + 2] = carl9170_calc_noise_dbm(
-			(phy_res[i + 2] >> 23) & 0x1ff);
+		ar->noise[i + 2] = sign_extend32(GET_VAL(
+			AR9170_PHY_EXT_CCA_MIN_PWR, phy_res[i + 2]), 8);
 	}
 
 	return 0;
@@ -1669,12 +1658,6 @@ int carl9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
 			return err;
 
 		cmd = CARL9170_CMD_RF_INIT;
-
-		msleep(100);
-
-		err = carl9170_echo_test(ar, 0xaabbccdd);
-		if (err)
-			return err;
 	} else {
 		cmd = CARL9170_CMD_FREQUENCY;
 	}
@@ -1685,6 +1668,8 @@ int carl9170_set_channel(struct ar9170 *ar, struct ieee80211_channel *channel,
 
 	err = carl9170_write_reg(ar, AR9170_PHY_REG_HEAVY_CLIP_ENABLE,
 				 0x200);
+	if (err)
+		return err;
 
 	err = carl9170_init_rf_bank4_pwr(ar,
 		channel->band == IEEE80211_BAND_5GHZ,
diff --git a/drivers/net/wireless/ath/carl9170/phy.h b/drivers/net/wireless/ath/carl9170/phy.h
index 02c34eb4ebd..024fb42bc78 100644
--- a/drivers/net/wireless/ath/carl9170/phy.h
+++ b/drivers/net/wireless/ath/carl9170/phy.h
@@ -139,8 +139,8 @@
 #define		AR9170_PHY_AGC_CONTROL_NO_UPDATE_NF	0x00020000
 
 #define	AR9170_PHY_REG_CCA			(AR9170_PHY_REG_BASE + 0x0064)
-#define		AR9170_PHY_CCA_MINCCA_PWR		0x0ff80000
-#define		AR9170_PHY_CCA_MINCCA_PWR_S		19
+#define		AR9170_PHY_CCA_MIN_PWR			0x0ff80000
+#define		AR9170_PHY_CCA_MIN_PWR_S		19
 #define		AR9170_PHY_CCA_THRESH62			0x0007f000
 #define		AR9170_PHY_CCA_THRESH62_S		12
 
@@ -338,8 +338,8 @@
 #define		AR9170_PHY_EXT_CCA_CYCPWR_THR1_S	9
 #define		AR9170_PHY_EXT_CCA_THRESH62		0x007f0000
 #define		AR9170_PHY_EXT_CCA_THRESH62_S		16
-#define		AR9170_PHY_EXT_MINCCA_PWR		0xff800000
-#define		AR9170_PHY_EXT_MINCCA_PWR_S		23
+#define		AR9170_PHY_EXT_CCA_MIN_PWR		0xff800000
+#define		AR9170_PHY_EXT_CCA_MIN_PWR_S		23
 
 #define	AR9170_PHY_REG_SFCORR_EXT		(AR9170_PHY_REG_BASE + 0x01c0)
 #define		AR9170_PHY_SFCORR_EXT_M1_THRESH		0x0000007f
@@ -546,19 +546,19 @@
 #define		AR9170_PHY_FORCE_XPA_CFG_S		0
 
 #define	AR9170_PHY_REG_CH1_CCA			(AR9170_PHY_REG_BASE + 0x1064)
-#define		AR9170_PHY_CH1_MINCCA_PWR		0x0ff80000
-#define		AR9170_PHY_CH1_MINCCA_PWR_S		19
+#define		AR9170_PHY_CH1_CCA_MIN_PWR		0x0ff80000
+#define		AR9170_PHY_CH1_CCA_MIN_PWR_S		19
 
 #define	AR9170_PHY_REG_CH2_CCA			(AR9170_PHY_REG_BASE + 0x2064)
-#define		AR9170_PHY_CH2_MINCCA_PWR		0x0ff80000
-#define		AR9170_PHY_CH2_MINCCA_PWR_S		19
+#define		AR9170_PHY_CH2_CCA_MIN_PWR		0x0ff80000
+#define		AR9170_PHY_CH2_CCA_MIN_PWR_S		19
 
 #define	AR9170_PHY_REG_CH1_EXT_CCA		(AR9170_PHY_REG_BASE + 0x11bc)
-#define		AR9170_PHY_CH1_EXT_MINCCA_PWR		0xff800000
-#define		AR9170_PHY_CH1_EXT_MINCCA_PWR_S		23
+#define		AR9170_PHY_CH1_EXT_CCA_MIN_PWR		0xff800000
+#define		AR9170_PHY_CH1_EXT_CCA_MIN_PWR_S	23
 
 #define	AR9170_PHY_REG_CH2_EXT_CCA		(AR9170_PHY_REG_BASE + 0x21bc)
-#define		AR9170_PHY_CH2_EXT_MINCCA_PWR		0xff800000
-#define		AR9170_PHY_CH2_EXT_MINCCA_PWR_S		23
+#define		AR9170_PHY_CH2_EXT_CCA_MIN_PWR		0xff800000
+#define		AR9170_PHY_CH2_EXT_CCA_MIN_PWR_S	23
 
 #endif	/* __CARL9170_SHARED_PHY_H */
diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c
index b575c865142..6cc58e052d1 100644
--- a/drivers/net/wireless/ath/carl9170/tx.c
+++ b/drivers/net/wireless/ath/carl9170/tx.c
@@ -242,9 +242,11 @@ static void carl9170_tx_release(struct kref *ref)
 			ar->tx_ampdu_schedule = true;
 
 		if (txinfo->flags & IEEE80211_TX_STAT_AMPDU) {
-			txinfo->status.ampdu_len = txinfo->pad[0];
-			txinfo->status.ampdu_ack_len = txinfo->pad[1];
-			txinfo->pad[0] = txinfo->pad[1] = 0;
+			struct _carl9170_tx_superframe *super;
+
+			super = (void *)skb->data;
+			txinfo->status.ampdu_len = super->s.rix;
+			txinfo->status.ampdu_ack_len = super->s.cnt;
 		} else if (txinfo->flags & IEEE80211_TX_STAT_ACK) {
 			/*
 			 * drop redundant tx_status reports:
@@ -337,7 +339,8 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar,
 	u8 tid;
 
 	if (!(txinfo->flags & IEEE80211_TX_CTL_AMPDU) ||
-	    txinfo->flags & IEEE80211_TX_CTL_INJECTED)
+	    txinfo->flags & IEEE80211_TX_CTL_INJECTED ||
+	   (!(super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_AGGR))))
 		return;
 
 	tx_info = IEEE80211_SKB_CB(skb);
@@ -389,8 +392,8 @@ static void carl9170_tx_status_process_ampdu(struct ar9170 *ar,
 		sta_info->stats[tid].ampdu_ack_len++;
 
 	if (super->f.mac_control & cpu_to_le16(AR9170_TX_MAC_IMM_BA)) {
-		txinfo->pad[0] = sta_info->stats[tid].ampdu_len;
-		txinfo->pad[1] = sta_info->stats[tid].ampdu_ack_len;
+		super->s.rix = sta_info->stats[tid].ampdu_len;
+		super->s.cnt = sta_info->stats[tid].ampdu_ack_len;
 		txinfo->flags |= IEEE80211_TX_STAT_AMPDU;
 		sta_info->stats[tid].clear = true;
 	}
@@ -524,6 +527,59 @@ next:
 	}
 }
 
+static void carl9170_tx_ampdu_timeout(struct ar9170 *ar)
+{
+	struct carl9170_sta_tid *iter;
+	struct sk_buff *skb;
+	struct ieee80211_tx_info *txinfo;
+	struct carl9170_tx_info *arinfo;
+	struct _carl9170_tx_superframe *super;
+	struct ieee80211_sta *sta;
+	struct ieee80211_vif *vif;
+	struct ieee80211_hdr *hdr;
+	unsigned int vif_id;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(iter, &ar->tx_ampdu_list, list) {
+		if (iter->state < CARL9170_TID_STATE_IDLE)
+			continue;
+
+		spin_lock_bh(&iter->lock);
+		skb = skb_peek(&iter->queue);
+		if (!skb)
+			goto unlock;
+
+		txinfo = IEEE80211_SKB_CB(skb);
+		arinfo = (void *)txinfo->rate_driver_data;
+		if (time_is_after_jiffies(arinfo->timeout +
+		    msecs_to_jiffies(CARL9170_QUEUE_TIMEOUT)))
+			goto unlock;
+
+		super = (void *) skb->data;
+		hdr = (void *) super->frame_data;
+
+		vif_id = (super->s.misc & CARL9170_TX_SUPER_MISC_VIF_ID) >>
+			 CARL9170_TX_SUPER_MISC_VIF_ID_S;
+
+		if (WARN_ON(vif_id >= AR9170_MAX_VIRTUAL_MAC))
+			goto unlock;
+
+		vif = rcu_dereference(ar->vif_priv[vif_id].vif);
+		if (WARN_ON(!vif))
+			goto unlock;
+
+		sta = ieee80211_find_sta(vif, hdr->addr1);
+		if (WARN_ON(!sta))
+			goto unlock;
+
+		ieee80211_stop_tx_ba_session(sta, iter->tid);
+unlock:
+		spin_unlock_bh(&iter->lock);
+
+	}
+	rcu_read_unlock();
+}
+
 void carl9170_tx_janitor(struct work_struct *work)
 {
 	struct ar9170 *ar = container_of(work, struct ar9170,
@@ -534,6 +590,7 @@ void carl9170_tx_janitor(struct work_struct *work)
 	ar->tx_janitor_last_run = jiffies;
 
 	carl9170_check_queue_stop_timeout(ar);
+	carl9170_tx_ampdu_timeout(ar);
 
 	if (!atomic_read(&ar->tx_total_queued))
 		return;
@@ -810,7 +867,7 @@ static int carl9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
 
 	mac_tmp = cpu_to_le16(AR9170_TX_MAC_HW_DURATION |
 			      AR9170_TX_MAC_BACKOFF);
-	mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) &&
+	mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) &
 			       AR9170_TX_MAC_QOS);
 
 	no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK);
@@ -842,10 +899,8 @@ static int carl9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb)
 		if (unlikely(!sta || !cvif))
 			goto err_out;
 
-		factor = min_t(unsigned int, 1u,
-			 info->control.sta->ht_cap.ampdu_factor);
-
-		density = info->control.sta->ht_cap.ampdu_density;
+		factor = min_t(unsigned int, 1u, sta->ht_cap.ampdu_factor);
+		density = sta->ht_cap.ampdu_density;
 
 		if (density) {
 			/*
@@ -1206,6 +1261,7 @@ static void carl9170_tx(struct ar9170 *ar)
 static bool carl9170_tx_ampdu_queue(struct ar9170 *ar,
 	struct ieee80211_sta *sta, struct sk_buff *skb)
 {
+	struct _carl9170_tx_superframe *super = (void *) skb->data;
 	struct carl9170_sta_info *sta_info;
 	struct carl9170_sta_tid *agg;
 	struct sk_buff *iter;
@@ -1274,6 +1330,7 @@ err_unlock:
 
 err_unlock_rcu:
 	rcu_read_unlock();
+	super->f.mac_control &= ~cpu_to_le16(AR9170_TX_MAC_AGGR);
 	carl9170_tx_status(ar, skb, false);
 	ar->tx_dropped++;
 	return false;
@@ -1302,9 +1359,6 @@ int carl9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 */
 
 	if (info->flags & IEEE80211_TX_CTL_AMPDU) {
-		if (WARN_ON_ONCE(!sta))
-			goto err_free;
-
 		run = carl9170_tx_ampdu_queue(ar, sta, skb);
 		if (run)
 			carl9170_tx_ampdu(ar);
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index d8607f4c144..537732e5964 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -82,9 +82,11 @@ static struct usb_device_id carl9170_usb_ids[] = {
 	{ USB_DEVICE(0x07d1, 0x3c10) },
 	/* D-Link DWA 160 A2 */
 	{ USB_DEVICE(0x07d1, 0x3a09) },
+	/* D-Link DWA 130 D */
+	{ USB_DEVICE(0x07d1, 0x3a0f) },
 	/* Netgear WNA1000 */
 	{ USB_DEVICE(0x0846, 0x9040) },
-	/* Netgear WNDA3100 */
+	/* Netgear WNDA3100 (v1) */
 	{ USB_DEVICE(0x0846, 0x9010) },
 	/* Netgear WN111 v2 */
 	{ USB_DEVICE(0x0846, 0x9001), .driver_info = CARL9170_ONE_LED },
@@ -158,8 +160,7 @@ err_acc:
 
 static void carl9170_usb_tx_data_complete(struct urb *urb)
 {
-	struct ar9170 *ar = (struct ar9170 *)
-	      usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
+	struct ar9170 *ar = usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 
 	if (WARN_ON_ONCE(!ar)) {
 		dev_kfree_skb_irq(urb->context);
@@ -431,7 +432,7 @@ static void carl9170_usb_rx_complete(struct urb *urb)
 			 * device.
 			 */
 
-			carl9170_restart(ar, CARL9170_RR_SLOW_SYSTEM);
+			ieee80211_queue_work(ar->hw, &ar->ping_work);
 		}
 	} else {
 		/*
@@ -551,12 +552,12 @@ static int carl9170_usb_flush(struct ar9170 *ar)
 		usb_free_urb(urb);
 	}
 
-	ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, HZ);
+	ret = usb_wait_anchor_empty_timeout(&ar->tx_cmd, 1000);
 	if (ret == 0)
 		err = -ETIMEDOUT;
 
 	/* lets wait a while until the tx - queues are dried out */
-	ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, HZ);
+	ret = usb_wait_anchor_empty_timeout(&ar->tx_anch, 1000);
 	if (ret == 0)
 		err = -ETIMEDOUT;
 
@@ -833,7 +834,7 @@ static int carl9170_usb_load_firmware(struct ar9170 *ar)
 	if (err)
 		goto err_out;
 
-	/* firmware restarts cmd counter */
+	/* now, start the command response counter */
 	ar->cmd_seq = -1;
 
 	return 0;
@@ -850,7 +851,12 @@ int carl9170_usb_restart(struct ar9170 *ar)
 	if (ar->intf->condition != USB_INTERFACE_BOUND)
 		return 0;
 
-	/* Disable command response sequence counter. */
+	/*
+	 * Disable the command response sequence counter check.
+	 * We already know that the device/firmware is in a bad state.
+	 * So, no extra points are awarded to anyone who reminds the
+	 * driver about that.
+	 */
 	ar->cmd_seq = -2;
 
 	err = carl9170_reboot(ar);
@@ -902,6 +908,15 @@ static int carl9170_usb_init_device(struct ar9170 *ar)
 {
 	int err;
 
+	/*
+	 * The carl9170 firmware let's the driver know when it's
+	 * ready for action. But we have to be prepared to gracefully
+	 * handle all spurious [flushed] messages after each (re-)boot.
+	 * Thus the command response counter remains disabled until it
+	 * can be safely synchronized.
+	 */
+	ar->cmd_seq = -2;
+
 	err = carl9170_usb_send_rx_irq_urb(ar);
 	if (err)
 		goto err_out;
@@ -910,14 +925,21 @@ static int carl9170_usb_init_device(struct ar9170 *ar)
 	if (err)
 		goto err_unrx;
 
+	err = carl9170_usb_open(ar);
+	if (err)
+		goto err_unrx;
+
 	mutex_lock(&ar->mutex);
 	err = carl9170_usb_load_firmware(ar);
 	mutex_unlock(&ar->mutex);
 	if (err)
-		goto err_unrx;
+		goto err_stop;
 
 	return 0;
 
+err_stop:
+	carl9170_usb_stop(ar);
+
 err_unrx:
 	carl9170_usb_cancel_urbs(ar);
 
@@ -963,10 +985,6 @@ static void carl9170_usb_firmware_finish(struct ar9170 *ar)
 	if (err)
 		goto err_freefw;
 
-	err = carl9170_usb_open(ar);
-	if (err)
-		goto err_unrx;
-
 	err = carl9170_register(ar);
 
 	carl9170_usb_stop(ar);
@@ -1042,7 +1060,6 @@ static int carl9170_usb_probe(struct usb_interface *intf,
 	atomic_set(&ar->rx_work_urbs, 0);
 	atomic_set(&ar->rx_anch_urbs, 0);
 	atomic_set(&ar->rx_pool_urbs, 0);
-	ar->cmd_seq = -2;
 
 	usb_get_dev(ar->udev);
 
@@ -1089,10 +1106,6 @@ static int carl9170_usb_suspend(struct usb_interface *intf,
 
 	carl9170_usb_cancel_urbs(ar);
 
-	/*
-	 * firmware automatically reboots for usb suspend.
-	 */
-
 	return 0;
 }
 
@@ -1105,12 +1118,20 @@ static int carl9170_usb_resume(struct usb_interface *intf)
 		return -ENODEV;
 
 	usb_unpoison_anchored_urbs(&ar->rx_anch);
+	carl9170_set_state(ar, CARL9170_STOPPED);
 
-	err = carl9170_usb_init_device(ar);
-	if (err)
-		goto err_unrx;
+	/*
+	 * The USB documentation demands that [for suspend] all traffic
+	 * to and from the device has to stop. This would be fine, but
+	 * there's a catch: the device[usb phy] does not come back.
+	 *
+	 * Upon resume the firmware will "kill" itself and the
+	 * boot-code sorts out the magic voodoo.
+	 * Not very nice, but there's not much what could go wrong.
+	 */
+	msleep(1100);
 
-	err = carl9170_usb_open(ar);
+	err = carl9170_usb_init_device(ar);
 	if (err)
 		goto err_unrx;
 
@@ -1132,6 +1153,7 @@ static struct usb_driver carl9170_driver = {
 #ifdef CONFIG_PM
 	.suspend = carl9170_usb_suspend,
 	.resume = carl9170_usb_resume,
+	.reset_resume = carl9170_usb_resume,
 #endif /* CONFIG_PM */
 };
 
diff --git a/drivers/net/wireless/ath/carl9170/version.h b/drivers/net/wireless/ath/carl9170/version.h
index ff53f078a0b..ee0f84f2a2f 100644
--- a/drivers/net/wireless/ath/carl9170/version.h
+++ b/drivers/net/wireless/ath/carl9170/version.h
@@ -1,7 +1,7 @@
 #ifndef __CARL9170_SHARED_VERSION_H
 #define __CARL9170_SHARED_VERSION_H
 #define CARL9170FW_VERSION_YEAR 10
-#define CARL9170FW_VERSION_MONTH 9
-#define CARL9170FW_VERSION_DAY 28
-#define CARL9170FW_VERSION_GIT "1.8.8.3"
+#define CARL9170FW_VERSION_MONTH 10
+#define CARL9170FW_VERSION_DAY 29
+#define CARL9170FW_VERSION_GIT "1.9.0"
 #endif /* __CARL9170_SHARED_VERSION_H */
diff --git a/drivers/net/wireless/ath/debug.c b/drivers/net/wireless/ath/debug.c
index dacfb234f49..5367b1086e0 100644
--- a/drivers/net/wireless/ath/debug.c
+++ b/drivers/net/wireless/ath/debug.c
@@ -15,21 +15,6 @@
  */
 
 #include "ath.h"
-#include "debug.h"
-
-void ath_print(struct ath_common *common, int dbg_mask, const char *fmt, ...)
-{
-	va_list args;
-
-	if (likely(!(common->debug_mask & dbg_mask)))
-		return;
-
-	va_start(args, fmt);
-	printk(KERN_DEBUG "ath: ");
-	vprintk(fmt, args);
-	va_end(args);
-}
-EXPORT_SYMBOL(ath_print);
 
 const char *ath_opmode_to_string(enum nl80211_iftype opmode)
 {
diff --git a/drivers/net/wireless/ath/debug.h b/drivers/net/wireless/ath/debug.h
deleted file mode 100644
index 64e4af2c288..00000000000
--- a/drivers/net/wireless/ath/debug.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright (c) 2008-2009 Atheros Communications Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef ATH_DEBUG_H
-#define ATH_DEBUG_H
-
-#include "ath.h"
-
-/**
- * enum ath_debug_level - atheros wireless debug level
- *
- * @ATH_DBG_RESET: reset processing
- * @ATH_DBG_QUEUE: hardware queue management
- * @ATH_DBG_EEPROM: eeprom processing
- * @ATH_DBG_CALIBRATE: periodic calibration
- * @ATH_DBG_INTERRUPT: interrupt processing
- * @ATH_DBG_REGULATORY: regulatory processing
- * @ATH_DBG_ANI: adaptive noise immunitive processing
- * @ATH_DBG_XMIT: basic xmit operation
- * @ATH_DBG_BEACON: beacon handling
- * @ATH_DBG_CONFIG: configuration of the hardware
- * @ATH_DBG_FATAL: fatal errors, this is the default, DBG_DEFAULT
- * @ATH_DBG_PS: power save processing
- * @ATH_DBG_HWTIMER: hardware timer handling
- * @ATH_DBG_BTCOEX: bluetooth coexistance
- * @ATH_DBG_BSTUCK: stuck beacons
- * @ATH_DBG_ANY: enable all debugging
- *
- * The debug level is used to control the amount and type of debugging output
- * we want to see. Each driver has its own method for enabling debugging and
- * modifying debug level states -- but this is typically done through a
- * module parameter 'debug' along with a respective 'debug' debugfs file
- * entry.
- */
-enum ATH_DEBUG {
-	ATH_DBG_RESET		= 0x00000001,
-	ATH_DBG_QUEUE		= 0x00000002,
-	ATH_DBG_EEPROM		= 0x00000004,
-	ATH_DBG_CALIBRATE	= 0x00000008,
-	ATH_DBG_INTERRUPT	= 0x00000010,
-	ATH_DBG_REGULATORY	= 0x00000020,
-	ATH_DBG_ANI		= 0x00000040,
-	ATH_DBG_XMIT		= 0x00000080,
-	ATH_DBG_BEACON		= 0x00000100,
-	ATH_DBG_CONFIG		= 0x00000200,
-	ATH_DBG_FATAL		= 0x00000400,
-	ATH_DBG_PS		= 0x00000800,
-	ATH_DBG_HWTIMER		= 0x00001000,
-	ATH_DBG_BTCOEX		= 0x00002000,
-	ATH_DBG_WMI		= 0x00004000,
-	ATH_DBG_BSTUCK		= 0x00008000,
-	ATH_DBG_ANY		= 0xffffffff
-};
-
-#define ATH_DBG_DEFAULT (ATH_DBG_FATAL)
-
-#ifdef CONFIG_ATH_DEBUG
-void ath_print(struct ath_common *common, int dbg_mask, const char *fmt, ...)
-	__attribute__ ((format (printf, 3, 4)));
-#else
-static inline void __attribute__ ((format (printf, 3, 4)))
-ath_print(struct ath_common *common, int dbg_mask, const char *fmt, ...)
-{
-}
-#endif /* CONFIG_ATH_DEBUG */
-
-/** Returns string describing opmode, or NULL if unknown mode. */
-#ifdef CONFIG_ATH_DEBUG
-const char *ath_opmode_to_string(enum nl80211_iftype opmode);
-#else
-static inline const char *ath_opmode_to_string(enum nl80211_iftype opmode)
-{
-	return "UNKNOWN";
-}
-#endif
-
-#endif /* ATH_DEBUG_H */
diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c
index bd21a4d8208..5d465e5fcf2 100644
--- a/drivers/net/wireless/ath/key.c
+++ b/drivers/net/wireless/ath/key.c
@@ -20,7 +20,6 @@
 
 #include "ath.h"
 #include "reg.h"
-#include "debug.h"
 
 #define REG_READ			(common->ops->read)
 #define REG_WRITE(_ah, _reg, _val)	(common->ops->write)(_ah, _val, _reg)
@@ -37,8 +36,7 @@ bool ath_hw_keyreset(struct ath_common *common, u16 entry)
 	void *ah = common->ah;
 
 	if (entry >= common->keymax) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "keychache entry %u out of range\n", entry);
+		ath_err(common, "keycache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -60,6 +58,8 @@ bool ath_hw_keyreset(struct ath_common *common, u16 entry)
 		REG_WRITE(ah, AR_KEYTABLE_KEY1(micentry), 0);
 		REG_WRITE(ah, AR_KEYTABLE_KEY2(micentry), 0);
 		REG_WRITE(ah, AR_KEYTABLE_KEY3(micentry), 0);
+		if (common->crypt_caps & ATH_CRYPT_CAP_MIC_COMBINED)
+			REG_WRITE(ah, AR_KEYTABLE_KEY4(micentry), 0);
 
 	}
 
@@ -67,15 +67,15 @@ bool ath_hw_keyreset(struct ath_common *common, u16 entry)
 }
 EXPORT_SYMBOL(ath_hw_keyreset);
 
-bool ath_hw_keysetmac(struct ath_common *common, u16 entry, const u8 *mac)
+static bool ath_hw_keysetmac(struct ath_common *common,
+			     u16 entry, const u8 *mac)
 {
 	u32 macHi, macLo;
 	u32 unicast_flag = AR_KEYTABLE_VALID;
 	void *ah = common->ah;
 
 	if (entry >= common->keymax) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "keychache entry %u out of range\n", entry);
+		ath_err(common, "keycache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -107,17 +107,16 @@ bool ath_hw_keysetmac(struct ath_common *common, u16 entry, const u8 *mac)
 	return true;
 }
 
-bool ath_hw_set_keycache_entry(struct ath_common *common, u16 entry,
-				 const struct ath_keyval *k,
-				 const u8 *mac)
+static bool ath_hw_set_keycache_entry(struct ath_common *common, u16 entry,
+				      const struct ath_keyval *k,
+				      const u8 *mac)
 {
 	void *ah = common->ah;
 	u32 key0, key1, key2, key3, key4;
 	u32 keyType;
 
 	if (entry >= common->keymax) {
-		ath_print(common, ATH_DBG_FATAL,
-			  "keycache entry %u out of range\n", entry);
+		ath_err(common, "keycache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -127,8 +126,8 @@ bool ath_hw_set_keycache_entry(struct ath_common *common, u16 entry,
 		break;
 	case ATH_CIPHER_AES_CCM:
 		if (!(common->crypt_caps & ATH_CRYPT_CAP_CIPHER_AESCCM)) {
-			ath_print(common, ATH_DBG_ANY,
-				  "AES-CCM not supported by this mac rev\n");
+			ath_dbg(common, ATH_DBG_ANY,
+				"AES-CCM not supported by this mac rev\n");
 			return false;
 		}
 		keyType = AR_KEYTABLE_TYPE_CCM;
@@ -136,15 +135,15 @@ bool ath_hw_set_keycache_entry(struct ath_common *common, u16 entry,
 	case ATH_CIPHER_TKIP:
 		keyType = AR_KEYTABLE_TYPE_TKIP;
 		if (entry + 64 >= common->keymax) {
-			ath_print(common, ATH_DBG_ANY,
-				  "entry %u inappropriate for TKIP\n", entry);
+			ath_dbg(common, ATH_DBG_ANY,
+				"entry %u inappropriate for TKIP\n", entry);
 			return false;
 		}
 		break;
 	case ATH_CIPHER_WEP:
 		if (k->kv_len < WLAN_KEY_LEN_WEP40) {
-			ath_print(common, ATH_DBG_ANY,
-				  "WEP key length %u too small\n", k->kv_len);
+			ath_dbg(common, ATH_DBG_ANY,
+				"WEP key length %u too small\n", k->kv_len);
 			return false;
 		}
 		if (k->kv_len <= WLAN_KEY_LEN_WEP40)
@@ -158,8 +157,7 @@ bool ath_hw_set_keycache_entry(struct ath_common *common, u16 entry,
 		keyType = AR_KEYTABLE_TYPE_CLR;
 		break;
 	default:
-		ath_print(common, ATH_DBG_FATAL,
-			  "cipher %u not supported\n", k->kv_type);
+		ath_err(common, "cipher %u not supported\n", k->kv_type);
 		return false;
 	}
 
@@ -340,8 +338,7 @@ static int ath_setkey_tkip(struct ath_common *common, u16 keyix, const u8 *key,
 	memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
 	if (!ath_hw_set_keycache_entry(common, keyix, hk, NULL)) {
 		/* TX MIC entry failed. No need to proceed further */
-		ath_print(common, ATH_DBG_FATAL,
-			  "Setting TX MIC Key Failed\n");
+		ath_err(common, "Setting TX MIC Key Failed\n");
 		return 0;
 	}
 
diff --git a/drivers/net/wireless/ath/main.c b/drivers/net/wireless/ath/main.c
index 487193f1de1..c325202fdc5 100644
--- a/drivers/net/wireless/ath/main.c
+++ b/drivers/net/wireless/ath/main.c
@@ -56,3 +56,23 @@ struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
 	return skb;
 }
 EXPORT_SYMBOL(ath_rxbuf_alloc);
+
+int ath_printk(const char *level, struct ath_common *common,
+	       const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+	int rtn;
+
+	va_start(args, fmt);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	rtn = printk("%sath: %pV", level, &vaf);
+
+	va_end(args);
+
+	return rtn;
+}
+EXPORT_SYMBOL(ath_printk);
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index 3f4244f56ce..2b14775e6bc 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -342,6 +342,14 @@ int ath_reg_notifier_apply(struct wiphy *wiphy,
 	/* We always apply this */
 	ath_reg_apply_radar_flags(wiphy);
 
+	/*
+	 * This would happen when we have sent a custom regulatory request
+	 * a world regulatory domain and the scheduler hasn't yet processed
+	 * any pending requests in the queue.
+	 */
+	if (!request)
+		return 0;
+
 	switch (request->initiator) {
 	case NL80211_REGDOM_SET_BY_DRIVER:
 	case NL80211_REGDOM_SET_BY_CORE:
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index c8f7090b27d..46e382ed46a 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -1161,7 +1161,7 @@ static irqreturn_t service_interrupt(int irq, void *dev_id)
 	struct atmel_private *priv = netdev_priv(dev);
 	u8 isr;
 	int i = -1;
-	static u8 irq_order[] = {
+	static const u8 irq_order[] = {
 		ISR_OUT_OF_RANGE,
 		ISR_RxCOMPLETE,
 		ISR_TxCOMPLETE,
@@ -3771,7 +3771,9 @@ static int probe_atmel_card(struct net_device *dev)
 
 	if (rc) {
 		if (dev->dev_addr[0] == 0xFF) {
-			u8 default_mac[] = {0x00, 0x04, 0x25, 0x00, 0x00, 0x00};
+			static const u8 default_mac[] = {
+				0x00, 0x04, 0x25, 0x00, 0x00, 0x00
+			};
 			printk(KERN_ALERT "%s: *** Invalid MAC address. UPGRADE Firmware ****\n", dev->name);
 			memcpy(dev->dev_addr, default_mac, 6);
 		}
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 0a00d42642c..47033f6a1c2 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -86,15 +86,16 @@ config B43_PIO
 	select SSB_BLOCKIO
 	default y
 
-config B43_NPHY
-	bool "Pre IEEE 802.11n support (BROKEN)"
-	depends on B43 && EXPERIMENTAL && BROKEN
+config B43_PHY_N
+	bool "Support for 802.11n (N-PHY) devices (EXPERIMENTAL)"
+	depends on B43 && EXPERIMENTAL
 	---help---
-	  Support for the IEEE 802.11n draft.
+	  Support for the N-PHY.
 
-	  THIS IS BROKEN AND DOES NOT WORK YET.
+	  This enables support for devices with N-PHY revision up to 2.
 
-	  SAY N.
+	  Say N if you expect high stability and performance. Saying Y will not
+	  affect other devices support and may provide support for basic needs.
 
 config B43_PHY_LP
 	bool "Support for low-power (LP-PHY) devices (EXPERIMENTAL)"
diff --git a/drivers/net/wireless/b43/Makefile b/drivers/net/wireless/b43/Makefile
index 69d4af09a6c..cef334a8c66 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -1,12 +1,12 @@
 b43-y				+= main.o
 b43-y				+= tables.o
-b43-$(CONFIG_B43_NPHY)		+= tables_nphy.o
-b43-$(CONFIG_B43_NPHY)		+= radio_2055.o
-b43-$(CONFIG_B43_NPHY)		+= radio_2056.o
+b43-$(CONFIG_B43_PHY_N)		+= tables_nphy.o
+b43-$(CONFIG_B43_PHY_N)		+= radio_2055.o
+b43-$(CONFIG_B43_PHY_N)		+= radio_2056.o
 b43-y				+= phy_common.o
 b43-y				+= phy_g.o
 b43-y				+= phy_a.o
-b43-$(CONFIG_B43_NPHY)		+= phy_n.o
+b43-$(CONFIG_B43_PHY_N)		+= phy_n.o
 b43-$(CONFIG_B43_PHY_LP)	+= phy_lp.o
 b43-$(CONFIG_B43_PHY_LP)	+= tables_lpphy.o
 b43-y				+= sysfs.o
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 72821c456b0..bd4cb75b6ca 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -153,6 +153,19 @@
 #define B43_BFH_FEM_BT			0x0040	/* has FEM and switch to share antenna
 						 * with bluetooth */
 
+/* SPROM boardflags2_lo values */
+#define B43_BFL2_RXBB_INT_REG_DIS	0x0001	/* external RX BB regulator present */
+#define B43_BFL2_APLL_WAR		0x0002	/* alternative A-band PLL settings implemented */
+#define B43_BFL2_TXPWRCTRL_EN 		0x0004	/* permits enabling TX Power Control */
+#define B43_BFL2_2X4_DIV		0x0008	/* 2x4 diversity switch */
+#define B43_BFL2_5G_PWRGAIN		0x0010	/* supports 5G band power gain */
+#define B43_BFL2_PCIEWAR_OVR		0x0020	/* overrides ASPM and Clkreq settings */
+#define B43_BFL2_CAESERS_BRD		0x0040	/* is Caesers board (unused) */
+#define B43_BFL2_BTC3WIRE		0x0080	/* used 3-wire bluetooth coexist */
+#define B43_BFL2_SKWRKFEM_BRD		0x0100	/* 4321mcm93 uses Skyworks FEM */
+#define B43_BFL2_SPUR_WAR		0x0200	/* has a workaround for clock-harmonic spurs */
+#define B43_BFL2_GPLL_WAR		0x0400	/* altenative G-band PLL settings implemented */
+
 /* GPIO register offset, in both ChipCommon and PCI core. */
 #define B43_GPIO_CONTROL		0x6c
 
@@ -403,10 +416,10 @@ enum {
 
 /* 802.11 core specific TM State Low (SSB_TMSLOW) flags */
 #define B43_TMSLOW_GMODE		0x20000000	/* G Mode Enable */
-#define B43_TMSLOW_PHYCLKSPEED		0x00C00000	/* PHY clock speed mask (N-PHY only) */
-#define  B43_TMSLOW_PHYCLKSPEED_40MHZ	0x00000000	/* 40 MHz PHY */
-#define  B43_TMSLOW_PHYCLKSPEED_80MHZ	0x00400000	/* 80 MHz PHY */
-#define  B43_TMSLOW_PHYCLKSPEED_160MHZ	0x00800000	/* 160 MHz PHY */
+#define B43_TMSLOW_PHY_BANDWIDTH	0x00C00000	/* PHY band width and clock speed mask (N-PHY only) */
+#define  B43_TMSLOW_PHY_BANDWIDTH_10MHZ	0x00000000	/* 10 MHz bandwidth, 40 MHz PHY */
+#define  B43_TMSLOW_PHY_BANDWIDTH_20MHZ	0x00400000	/* 20 MHz bandwidth, 80 MHz PHY */
+#define  B43_TMSLOW_PHY_BANDWIDTH_40MHZ	0x00800000	/* 40 MHz bandwidth, 160 MHz PHY */
 #define B43_TMSLOW_PLLREFSEL		0x00200000	/* PLL Frequency Reference Select (rev >= 5) */
 #define B43_TMSLOW_MACPHYCLKEN		0x00100000	/* MAC PHY Clock Control Enable (rev >= 5) */
 #define B43_TMSLOW_PHYRESET		0x00080000	/* PHY Reset */
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 10d0aaf754c..3d5566e7af0 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -415,11 +415,6 @@ static int alloc_ringmemory(struct b43_dmaring *ring)
 
 static void free_ringmemory(struct b43_dmaring *ring)
 {
-	gfp_t flags = GFP_KERNEL;
-
-	if (ring->type == B43_DMA_64BIT)
-		flags |= GFP_DMA;
-
 	dma_free_coherent(ring->dev->dev->dma_dev, B43_DMA_RINGMEMSIZE,
 			  ring->descbase, ring->dmabase);
 }
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index a1186525c70..22bc9f17f63 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -322,59 +322,83 @@ static int b43_ratelimit(struct b43_wl *wl)
 
 void b43info(struct b43_wl *wl, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 
 	if (b43_modparam_verbose < B43_VERBOSITY_INFO)
 		return;
 	if (!b43_ratelimit(wl))
 		return;
+
 	va_start(args, fmt);
-	printk(KERN_INFO "b43-%s: ",
-	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
-	vprintk(fmt, args);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	printk(KERN_INFO "b43-%s: %pV",
+	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
+
 	va_end(args);
 }
 
 void b43err(struct b43_wl *wl, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 
 	if (b43_modparam_verbose < B43_VERBOSITY_ERROR)
 		return;
 	if (!b43_ratelimit(wl))
 		return;
+
 	va_start(args, fmt);
-	printk(KERN_ERR "b43-%s ERROR: ",
-	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
-	vprintk(fmt, args);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	printk(KERN_ERR "b43-%s ERROR: %pV",
+	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
+
 	va_end(args);
 }
 
 void b43warn(struct b43_wl *wl, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 
 	if (b43_modparam_verbose < B43_VERBOSITY_WARN)
 		return;
 	if (!b43_ratelimit(wl))
 		return;
+
 	va_start(args, fmt);
-	printk(KERN_WARNING "b43-%s warning: ",
-	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
-	vprintk(fmt, args);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	printk(KERN_WARNING "b43-%s warning: %pV",
+	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
+
 	va_end(args);
 }
 
 void b43dbg(struct b43_wl *wl, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 
 	if (b43_modparam_verbose < B43_VERBOSITY_DEBUG)
 		return;
+
 	va_start(args, fmt);
-	printk(KERN_DEBUG "b43-%s debug: ",
-	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
-	vprintk(fmt, args);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	printk(KERN_DEBUG "b43-%s debug: %pV",
+	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
+
 	va_end(args);
 }
 
@@ -1126,6 +1150,8 @@ void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 
 	flags |= B43_TMSLOW_PHYCLKEN;
 	flags |= B43_TMSLOW_PHYRESET;
+	if (dev->phy.type == B43_PHYTYPE_N)
+		flags |= B43_TMSLOW_PHY_BANDWIDTH_20MHZ; /* Make 20 MHz def */
 	ssb_device_enable(dev->dev, flags);
 	msleep(2);		/* Wait for the PLL to turn on. */
 
@@ -2095,8 +2121,10 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 		filename = "ucode13";
 	else if (rev == 14)
 		filename = "ucode14";
-	else if (rev >= 15)
+	else if (rev == 15)
 		filename = "ucode15";
+	else if ((rev >= 16) && (rev <= 20))
+		filename = "ucode16_mimo";
 	else
 		goto err_no_ucode;
 	err = b43_do_request_fw(ctx, filename, &fw->ucode);
@@ -2139,7 +2167,9 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 			goto err_no_initvals;
 		break;
 	case B43_PHYTYPE_N:
-		if ((rev >= 11) && (rev <= 12))
+		if (rev >= 16)
+			filename = "n0initvals16";
+		else if ((rev >= 11) && (rev <= 12))
 			filename = "n0initvals11";
 		else
 			goto err_no_initvals;
@@ -2183,7 +2213,9 @@ static int b43_try_request_fw(struct b43_request_fw_context *ctx)
 			goto err_no_initvals;
 		break;
 	case B43_PHYTYPE_N:
-		if ((rev >= 11) && (rev <= 12))
+		if (rev >= 16)
+			filename = "n0bsinitvals16";
+		else if ((rev >= 11) && (rev <= 12))
 			filename = "n0bsinitvals11";
 		else
 			goto err_no_initvals;
@@ -4022,9 +4054,9 @@ static int b43_phy_versioning(struct b43_wldev *dev)
 		if (phy_rev > 9)
 			unsupported = 1;
 		break;
-#ifdef CONFIG_B43_NPHY
+#ifdef CONFIG_B43_PHY_N
 	case B43_PHYTYPE_N:
-		if (phy_rev > 4)
+		if (phy_rev > 9)
 			unsupported = 1;
 		break;
 #endif
@@ -5067,7 +5099,7 @@ static void b43_print_driverinfo(void)
 #ifdef CONFIG_B43_PCMCIA
 	feat_pcmcia = "M";
 #endif
-#ifdef CONFIG_B43_NPHY
+#ifdef CONFIG_B43_PHY_N
 	feat_nphy = "N";
 #endif
 #ifdef CONFIG_B43_LEDS
diff --git a/drivers/net/wireless/b43/phy_common.c b/drivers/net/wireless/b43/phy_common.c
index 7b2ea678145..b5c5ce94d3f 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -50,7 +50,7 @@ int b43_phy_allocate(struct b43_wldev *dev)
 		phy->ops = &b43_phyops_g;
 		break;
 	case B43_PHYTYPE_N:
-#ifdef CONFIG_B43_NPHY
+#ifdef CONFIG_B43_PHY_N
 		phy->ops = &b43_phyops_n;
 #endif
 		break;
@@ -231,6 +231,7 @@ void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set)
 u16 b43_phy_read(struct b43_wldev *dev, u16 reg)
 {
 	assert_mac_suspended(dev);
+	dev->phy.writes_counter = 0;
 	return dev->phy.ops->phy_read(dev, reg);
 }
 
@@ -238,6 +239,10 @@ void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value)
 {
 	assert_mac_suspended(dev);
 	dev->phy.ops->phy_write(dev, reg, value);
+	if (++dev->phy.writes_counter == B43_MAX_WRITES_IN_ROW) {
+		b43_read16(dev, B43_MMIO_PHY_VER);
+		dev->phy.writes_counter = 0;
+	}
 }
 
 void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)
@@ -424,12 +429,21 @@ void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
 	b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
 }
 
+
+bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type)
+{
+	return (channel_type == NL80211_CHAN_HT40MINUS ||
+		channel_type == NL80211_CHAN_HT40PLUS);
+}
+
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/Cordic */
 struct b43_c32 b43_cordic(int theta)
 {
-	u32 arctg[] = { 2949120, 1740967, 919879, 466945, 234379, 117304,
-		      58666, 29335, 14668, 7334, 3667, 1833, 917, 458,
-		      229, 115, 57, 29, };
+	static const u32 arctg[] = {
+		2949120, 1740967, 919879, 466945, 234379, 117304,
+		  58666,   29335,  14668,   7334,   3667,   1833,
+		    917,     458,    229,    115,     57,     29,
+	};
 	u8 i;
 	s32 tmp;
 	s8 signx = 1;
diff --git a/drivers/net/wireless/b43/phy_common.h b/drivers/net/wireless/b43/phy_common.h
index 0e619422884..2401bee8b08 100644
--- a/drivers/net/wireless/b43/phy_common.h
+++ b/drivers/net/wireless/b43/phy_common.h
@@ -39,6 +39,9 @@ struct b43_c32 { s32 i, q; };
 #define B43_PHYVER_TYPE_SHIFT		8
 #define B43_PHYVER_VERSION		0x00FF
 
+/* PHY writes need to be flushed if we reach limit */
+#define B43_MAX_WRITES_IN_ROW		24
+
 /**
  * enum b43_interference_mitigation - Interference Mitigation mode
  *
@@ -232,6 +235,9 @@ struct b43_phy {
 	/* PHY revision number. */
 	u8 rev;
 
+	/* Count writes since last read */
+	u8 writes_counter;
+
 	/* Radio versioning */
 	u16 radio_manuf;	/* Radio manufacturer */
 	u16 radio_ver;		/* Radio version */
@@ -430,6 +436,8 @@ int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset);
  */
 void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
 
+bool b43_channel_type_is_40mhz(enum nl80211_channel_type channel_type);
+
 struct b43_c32 b43_cordic(int theta);
 
 #endif /* LINUX_B43_PHY_COMMON_H_ */
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index e0f2d122e12..ab81ed8b19d 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -67,6 +67,18 @@ enum b43_nphy_rf_sequence {
 	B43_RFSEQ_UPDATE_GAINU,
 };
 
+enum b43_nphy_rssi_type {
+	B43_NPHY_RSSI_X = 0,
+	B43_NPHY_RSSI_Y,
+	B43_NPHY_RSSI_Z,
+	B43_NPHY_RSSI_PWRDET,
+	B43_NPHY_RSSI_TSSI_I,
+	B43_NPHY_RSSI_TSSI_Q,
+	B43_NPHY_RSSI_TBD,
+};
+
+static void b43_nphy_stay_in_carrier_search(struct b43_wldev *dev,
+						bool enable);
 static void b43_nphy_set_rf_sequence(struct b43_wldev *dev, u8 cmd,
 					u8 *events, u8 *delays, u8 length);
 static void b43_nphy_force_rf_sequence(struct b43_wldev *dev,
@@ -76,13 +88,6 @@ static void b43_nphy_rf_control_override(struct b43_wldev *dev, u16 field,
 static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
 						u16 value, u8 core);
 
-static inline bool b43_channel_type_is_40mhz(
-					enum nl80211_channel_type channel_type)
-{
-	return (channel_type == NL80211_CHAN_HT40MINUS ||
-		channel_type == NL80211_CHAN_HT40PLUS);
-}
-
 void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
 {//TODO
 }
@@ -134,6 +139,99 @@ static void b43_chantab_radio_upload(struct b43_wldev *dev,
 	b43_radio_write(dev, B2055_C2_TX_MXBGTRIM, e->radio_c2_tx_mxbgtrim);
 }
 
+static void b43_chantab_radio_2056_upload(struct b43_wldev *dev,
+				const struct b43_nphy_channeltab_entry_rev3 *e)
+{
+	b43_radio_write(dev, B2056_SYN_PLL_VCOCAL1, e->radio_syn_pll_vcocal1);
+	b43_radio_write(dev, B2056_SYN_PLL_VCOCAL2, e->radio_syn_pll_vcocal2);
+	b43_radio_write(dev, B2056_SYN_PLL_REFDIV, e->radio_syn_pll_refdiv);
+	b43_radio_write(dev, B2056_SYN_PLL_MMD2, e->radio_syn_pll_mmd2);
+	b43_radio_write(dev, B2056_SYN_PLL_MMD1, e->radio_syn_pll_mmd1);
+	b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER1,
+					e->radio_syn_pll_loopfilter1);
+	b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER2,
+					e->radio_syn_pll_loopfilter2);
+	b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER3,
+					e->radio_syn_pll_loopfilter3);
+	b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER4,
+					e->radio_syn_pll_loopfilter4);
+	b43_radio_write(dev, B2056_SYN_PLL_LOOPFILTER5,
+					e->radio_syn_pll_loopfilter5);
+	b43_radio_write(dev, B2056_SYN_RESERVED_ADDR27,
+					e->radio_syn_reserved_addr27);
+	b43_radio_write(dev, B2056_SYN_RESERVED_ADDR28,
+					e->radio_syn_reserved_addr28);
+	b43_radio_write(dev, B2056_SYN_RESERVED_ADDR29,
+					e->radio_syn_reserved_addr29);
+	b43_radio_write(dev, B2056_SYN_LOGEN_VCOBUF1,
+					e->radio_syn_logen_vcobuf1);
+	b43_radio_write(dev, B2056_SYN_LOGEN_MIXER2, e->radio_syn_logen_mixer2);
+	b43_radio_write(dev, B2056_SYN_LOGEN_BUF3, e->radio_syn_logen_buf3);
+	b43_radio_write(dev, B2056_SYN_LOGEN_BUF4, e->radio_syn_logen_buf4);
+
+	b43_radio_write(dev, B2056_RX0 | B2056_RX_LNAA_TUNE,
+					e->radio_rx0_lnaa_tune);
+	b43_radio_write(dev, B2056_RX0 | B2056_RX_LNAG_TUNE,
+					e->radio_rx0_lnag_tune);
+
+	b43_radio_write(dev, B2056_TX0 | B2056_TX_INTPAA_BOOST_TUNE,
+					e->radio_tx0_intpaa_boost_tune);
+	b43_radio_write(dev, B2056_TX0 | B2056_TX_INTPAG_BOOST_TUNE,
+					e->radio_tx0_intpag_boost_tune);
+	b43_radio_write(dev, B2056_TX0 | B2056_TX_PADA_BOOST_TUNE,
+					e->radio_tx0_pada_boost_tune);
+	b43_radio_write(dev, B2056_TX0 | B2056_TX_PADG_BOOST_TUNE,
+					e->radio_tx0_padg_boost_tune);
+	b43_radio_write(dev, B2056_TX0 | B2056_TX_PGAA_BOOST_TUNE,
+					e->radio_tx0_pgaa_boost_tune);
+	b43_radio_write(dev, B2056_TX0 | B2056_TX_PGAG_BOOST_TUNE,
+					e->radio_tx0_pgag_boost_tune);
+	b43_radio_write(dev, B2056_TX0 | B2056_TX_MIXA_BOOST_TUNE,
+					e->radio_tx0_mixa_boost_tune);
+	b43_radio_write(dev, B2056_TX0 | B2056_TX_MIXG_BOOST_TUNE,
+					e->radio_tx0_mixg_boost_tune);
+
+	b43_radio_write(dev, B2056_RX1 | B2056_RX_LNAA_TUNE,
+					e->radio_rx1_lnaa_tune);
+	b43_radio_write(dev, B2056_RX1 | B2056_RX_LNAG_TUNE,
+					e->radio_rx1_lnag_tune);
+
+	b43_radio_write(dev, B2056_TX1 | B2056_TX_INTPAA_BOOST_TUNE,
+					e->radio_tx1_intpaa_boost_tune);
+	b43_radio_write(dev, B2056_TX1 | B2056_TX_INTPAG_BOOST_TUNE,
+					e->radio_tx1_intpag_boost_tune);
+	b43_radio_write(dev, B2056_TX1 | B2056_TX_PADA_BOOST_TUNE,
+					e->radio_tx1_pada_boost_tune);
+	b43_radio_write(dev, B2056_TX1 | B2056_TX_PADG_BOOST_TUNE,
+					e->radio_tx1_padg_boost_tune);
+	b43_radio_write(dev, B2056_TX1 | B2056_TX_PGAA_BOOST_TUNE,
+					e->radio_tx1_pgaa_boost_tune);
+	b43_radio_write(dev, B2056_TX1 | B2056_TX_PGAG_BOOST_TUNE,
+					e->radio_tx1_pgag_boost_tune);
+	b43_radio_write(dev, B2056_TX1 | B2056_TX_MIXA_BOOST_TUNE,
+					e->radio_tx1_mixa_boost_tune);
+	b43_radio_write(dev, B2056_TX1 | B2056_TX_MIXG_BOOST_TUNE,
+					e->radio_tx1_mixg_boost_tune);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/Radio/2056Setup */
+static void b43_radio_2056_setup(struct b43_wldev *dev,
+				const struct b43_nphy_channeltab_entry_rev3 *e)
+{
+	B43_WARN_ON(dev->phy.rev < 3);
+
+	b43_chantab_radio_2056_upload(dev, e);
+	/* TODO */
+	udelay(50);
+	/* VCO calibration */
+	b43_radio_write(dev, B2056_SYN_PLL_VCOCAL12, 0x00);
+	b43_radio_write(dev, B2056_TX_INTPAA_PA_MISC, 0x38);
+	b43_radio_write(dev, B2056_TX_INTPAA_PA_MISC, 0x18);
+	b43_radio_write(dev, B2056_TX_INTPAA_PA_MISC, 0x38);
+	b43_radio_write(dev, B2056_TX_INTPAA_PA_MISC, 0x39);
+	udelay(300);
+}
+
 static void b43_chantab_phy_upload(struct b43_wldev *dev,
 				   const struct b43_phy_n_sfo_cfg *e)
 {
@@ -145,9 +243,154 @@ static void b43_chantab_phy_upload(struct b43_wldev *dev,
 	b43_phy_write(dev, B43_NPHY_BW6, e->phy_bw6);
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlEnable */
+static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
+{
+	struct b43_phy_n *nphy = dev->phy.n;
+	u8 i;
+	u16 tmp;
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 1);
+
+	nphy->txpwrctrl = enable;
+	if (!enable) {
+		if (dev->phy.rev >= 3)
+			; /* TODO */
+
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x6840);
+		for (i = 0; i < 84; i++)
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0);
+
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x6C40);
+		for (i = 0; i < 84; i++)
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0);
+
+		tmp = B43_NPHY_TXPCTL_CMD_COEFF | B43_NPHY_TXPCTL_CMD_HWPCTLEN;
+		if (dev->phy.rev >= 3)
+			tmp |= B43_NPHY_TXPCTL_CMD_PCTLEN;
+		b43_phy_mask(dev, B43_NPHY_TXPCTL_CMD, ~tmp);
+
+		if (dev->phy.rev >= 3) {
+			b43_phy_set(dev, B43_NPHY_AFECTL_OVER1, 0x0100);
+			b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x0100);
+		} else {
+			b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x4000);
+		}
+
+		if (dev->phy.rev == 2)
+			b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3,
+				~B43_NPHY_BPHY_CTL3_SCALE, 0x53);
+		else if (dev->phy.rev < 2)
+			b43_phy_maskset(dev, B43_NPHY_BPHY_CTL3,
+				~B43_NPHY_BPHY_CTL3_SCALE, 0x5A);
+
+		if (dev->phy.rev < 2 && 0)
+			; /* TODO */
+	} else {
+		b43err(dev->wl, "enabling tx pwr ctrl not implemented yet\n");
+	}
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 0);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrFix */
 static void b43_nphy_tx_power_fix(struct b43_wldev *dev)
 {
-	//TODO
+	struct b43_phy_n *nphy = dev->phy.n;
+	struct ssb_sprom *sprom = &(dev->dev->bus->sprom);
+
+	u8 txpi[2], bbmult, i;
+	u16 tmp, radio_gain, dac_gain;
+	u16 freq = dev->phy.channel_freq;
+	u32 txgain;
+	/* u32 gaintbl; rev3+ */
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 1);
+
+	if (dev->phy.rev >= 3) {
+		txpi[0] = 40;
+		txpi[1] = 40;
+	} else if (sprom->revision < 4) {
+		txpi[0] = 72;
+		txpi[1] = 72;
+	} else {
+		if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
+			txpi[0] = sprom->txpid2g[0];
+			txpi[1] = sprom->txpid2g[1];
+		} else if (freq >= 4900 && freq < 5100) {
+			txpi[0] = sprom->txpid5gl[0];
+			txpi[1] = sprom->txpid5gl[1];
+		} else if (freq >= 5100 && freq < 5500) {
+			txpi[0] = sprom->txpid5g[0];
+			txpi[1] = sprom->txpid5g[1];
+		} else if (freq >= 5500) {
+			txpi[0] = sprom->txpid5gh[0];
+			txpi[1] = sprom->txpid5gh[1];
+		} else {
+			txpi[0] = 91;
+			txpi[1] = 91;
+		}
+	}
+
+	/*
+	for (i = 0; i < 2; i++) {
+		nphy->txpwrindex[i].index_internal = txpi[i];
+		nphy->txpwrindex[i].index_internal_save = txpi[i];
+	}
+	*/
+
+	for (i = 0; i < 2; i++) {
+		if (dev->phy.rev >= 3) {
+			/* FIXME: support 5GHz */
+			txgain = b43_ntab_tx_gain_rev3plus_2ghz[txpi[i]];
+			radio_gain = (txgain >> 16) & 0x1FFFF;
+		} else {
+			txgain = b43_ntab_tx_gain_rev0_1_2[txpi[i]];
+			radio_gain = (txgain >> 16) & 0x1FFF;
+		}
+
+		dac_gain = (txgain >> 8) & 0x3F;
+		bbmult = txgain & 0xFF;
+
+		if (dev->phy.rev >= 3) {
+			if (i == 0)
+				b43_phy_set(dev, B43_NPHY_AFECTL_OVER1, 0x0100);
+			else
+				b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x0100);
+		} else {
+			b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x4000);
+		}
+
+		if (i == 0)
+			b43_phy_write(dev, B43_NPHY_AFECTL_DACGAIN1, dac_gain);
+		else
+			b43_phy_write(dev, B43_NPHY_AFECTL_DACGAIN2, dac_gain);
+
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D10 + i);
+		b43_phy_write(dev, B43_NPHY_TABLE_DATALO, radio_gain);
+
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x3C57);
+		tmp = b43_phy_read(dev, B43_NPHY_TABLE_DATALO);
+
+		if (i == 0)
+			tmp = (tmp & 0x00FF) | (bbmult << 8);
+		else
+			tmp = (tmp & 0xFF00) | bbmult;
+
+		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x3C57);
+		b43_phy_write(dev, B43_NPHY_TABLE_DATALO, tmp);
+
+		if (0)
+			; /* TODO */
+	}
+
+	b43_phy_mask(dev, B43_NPHY_BPHY_CTL2, ~B43_NPHY_BPHY_CTL2_LUT);
+
+	if (nphy->hang_avoid)
+		b43_nphy_stay_in_carrier_search(dev, 0);
 }
 
 
@@ -191,7 +434,8 @@ static void b43_radio_init2055_post(struct b43_wldev *dev)
 				binfo->type != 0x46D ||
 				binfo->rev < 0x41);
 	else
-		workaround = ((sprom->boardflags_hi & B43_BFH_NOPA) == 0);
+		workaround =
+			!(sprom->boardflags2_lo & B43_BFL2_RXBB_INT_REG_DIS);
 
 	b43_radio_mask(dev, B2055_MASTER1, 0xFFF3);
 	if (workaround) {
@@ -240,23 +484,55 @@ static void b43_radio_init2055_post(struct b43_wldev *dev)
 static void b43_radio_init2055(struct b43_wldev *dev)
 {
 	b43_radio_init2055_pre(dev);
-	if (b43_status(dev) < B43_STAT_INITIALIZED)
-		b2055_upload_inittab(dev, 0, 1);
-	else
-		b2055_upload_inittab(dev, 0/*FIXME on 5ghz band*/, 0);
+	if (b43_status(dev) < B43_STAT_INITIALIZED) {
+		/* Follow wl, not specs. Do not force uploading all regs */
+		b2055_upload_inittab(dev, 0, 0);
+	} else {
+		bool ghz5 = b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ;
+		b2055_upload_inittab(dev, ghz5, 0);
+	}
 	b43_radio_init2055_post(dev);
 }
 
+static void b43_radio_init2056_pre(struct b43_wldev *dev)
+{
+	b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
+		     ~B43_NPHY_RFCTL_CMD_CHIP0PU);
+	/* Maybe wl meant to reset and set (order?) RFCTL_CMD_OEPORFORCE? */
+	b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
+		     B43_NPHY_RFCTL_CMD_OEPORFORCE);
+	b43_phy_set(dev, B43_NPHY_RFCTL_CMD,
+		    ~B43_NPHY_RFCTL_CMD_OEPORFORCE);
+	b43_phy_set(dev, B43_NPHY_RFCTL_CMD,
+		    B43_NPHY_RFCTL_CMD_CHIP0PU);
+}
+
+static void b43_radio_init2056_post(struct b43_wldev *dev)
+{
+	b43_radio_set(dev, B2056_SYN_COM_CTRL, 0xB);
+	b43_radio_set(dev, B2056_SYN_COM_PU, 0x2);
+	b43_radio_set(dev, B2056_SYN_COM_RESET, 0x2);
+	msleep(1);
+	b43_radio_mask(dev, B2056_SYN_COM_RESET, ~0x2);
+	b43_radio_mask(dev, B2056_SYN_PLL_MAST2, ~0xFC);
+	b43_radio_mask(dev, B2056_SYN_RCCAL_CTRL0, ~0x1);
+	/*
+	if (nphy->init_por)
+		Call Radio 2056 Recalibrate
+	*/
+}
+
 /*
  * Initialize a Broadcom 2056 N-radio
  * http://bcm-v4.sipsolutions.net/802.11/Radio/2056/Init
  */
 static void b43_radio_init2056(struct b43_wldev *dev)
 {
-	/* TODO */
+	b43_radio_init2056_pre(dev);
+	b2056_upload_inittabs(dev, 0, 0);
+	b43_radio_init2056_post(dev);
 }
 
-
 /*
  * Upload the N-PHY tables.
  * http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
@@ -453,6 +729,8 @@ static void b43_nphy_rx_iq_coeffs(struct b43_wldev *dev, bool write,
 	}
 }
 
+#if 0
+/* Ready but not used anywhere */
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RxCalPhyCleanup */
 static void b43_nphy_rx_cal_phy_cleanup(struct b43_wldev *dev, u8 core)
 {
@@ -534,6 +812,7 @@ static void b43_nphy_rx_cal_phy_setup(struct b43_wldev *dev, u8 core)
 	b43_nphy_rf_control_intc_override(dev, 1, rxval, (core + 1));
 	b43_nphy_rf_control_intc_override(dev, 1, txval, (2 - core));
 }
+#endif
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalcRxIqComp */
 static void b43_nphy_calc_rx_iq_comp(struct b43_wldev *dev, u8 mask)
@@ -569,7 +848,6 @@ static void b43_nphy_calc_rx_iq_comp(struct b43_wldev *dev, u8 mask)
 			ii = est.i1_pwr;
 			qq = est.q1_pwr;
 		} else {
-			B43_WARN_ON(1);
 			continue;
 		}
 
@@ -651,7 +929,8 @@ static void b43_nphy_tx_iq_workaround(struct b43_wldev *dev)
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/clip-detection */
-static void b43_nphy_write_clip_detection(struct b43_wldev *dev, u16 *clip_st)
+static void b43_nphy_write_clip_detection(struct b43_wldev *dev,
+					  const u16 *clip_st)
 {
 	b43_phy_write(dev, B43_NPHY_C1_CLIP1THRES, clip_st[0]);
 	b43_phy_write(dev, B43_NPHY_C2_CLIP1THRES, clip_st[1]);
@@ -727,7 +1006,7 @@ static void b43_nphy_stay_in_carrier_search(struct b43_wldev *dev, bool enable)
 	struct b43_phy_n *nphy = phy->n;
 
 	if (enable) {
-		u16 clip[] = { 0xFFFF, 0xFFFF };
+		static const u16 clip[] = { 0xFFFF, 0xFFFF };
 		if (nphy->deaf_count++ == 0) {
 			nphy->classifier_state = b43_nphy_classifier(dev, 0, 0);
 			b43_nphy_classifier(dev, 0x7, 0);
@@ -839,7 +1118,7 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
 	u16 data[4];
 	s16 gain[2];
 	u16 minmax[2];
-	u16 lna_gain[4] = { -2, 10, 19, 25 };
+	static const u16 lna_gain[4] = { -2, 10, 19, 25 };
 
 	if (nphy->hang_avoid)
 		b43_nphy_stay_in_carrier_search(dev, 1);
@@ -871,7 +1150,7 @@ static void b43_nphy_adjust_lna_gain_table(struct b43_wldev *dev)
 			data[2] = lna_gain[2] + gain[i];
 			data[3] = lna_gain[3] + gain[i];
 		}
-		b43_ntab_write_bulk(dev, B43_NTAB16(10, 8), 4, data);
+		b43_ntab_write_bulk(dev, B43_NTAB16(i, 8), 4, data);
 
 		minmax[i] = 23 + gain[i];
 	}
@@ -891,6 +1170,7 @@ static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
 	struct b43_phy_n *nphy = dev->phy.n;
 	u8 i, j;
 	u8 code;
+	u16 tmp;
 
 	/* TODO: for PHY >= 3
 	s8 *lna1_gain, *lna2_gain;
@@ -913,15 +1193,15 @@ static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
 				B43_NPHY_C2_CGAINI_CL2DETECT);
 
 		/* Set narrowband clip threshold */
-		b43_phy_set(dev, B43_NPHY_C1_NBCLIPTHRES, 0x84);
-		b43_phy_set(dev, B43_NPHY_C2_NBCLIPTHRES, 0x84);
+		b43_phy_write(dev, B43_NPHY_C1_NBCLIPTHRES, 0x84);
+		b43_phy_write(dev, B43_NPHY_C2_NBCLIPTHRES, 0x84);
 
 		if (!dev->phy.is_40mhz) {
 			/* Set dwell lengths */
-			b43_phy_set(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 0x002B);
-			b43_phy_set(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 0x002B);
-			b43_phy_set(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 0x0009);
-			b43_phy_set(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 0x0009);
+			b43_phy_write(dev, B43_NPHY_CLIP1_NBDWELL_LEN, 0x002B);
+			b43_phy_write(dev, B43_NPHY_CLIP2_NBDWELL_LEN, 0x002B);
+			b43_phy_write(dev, B43_NPHY_W1CLIP1_DWELL_LEN, 0x0009);
+			b43_phy_write(dev, B43_NPHY_W1CLIP2_DWELL_LEN, 0x0009);
 		}
 
 		/* Set wideband clip 2 threshold */
@@ -943,7 +1223,7 @@ static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
 				~B43_NPHY_C2_CCK_CGAINI_GAINBKOFF, 0x1);
 		}
 
-		b43_phy_set(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C);
+		b43_phy_write(dev, B43_NPHY_CCK_SHIFTB_REF, 0x809C);
 
 		if (nphy->gain_boost) {
 			if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ &&
@@ -964,10 +1244,10 @@ static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
 				code << B43_NPHY_C2_INITGAIN_HPVGA2_SHIFT);
 
 		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06);
-		b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
-					(code << 8 | 0x7C));
-		b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
-					(code << 8 | 0x7C));
+		/* specs say about 2 loops, but wl does 4 */
+		for (i = 0; i < 4; i++)
+			b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+							(code << 8 | 0x7C));
 
 		b43_nphy_adjust_lna_gain_table(dev);
 
@@ -985,19 +1265,21 @@ static void b43_nphy_gain_ctrl_workarounds(struct b43_wldev *dev)
 			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x1);
 
 			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x1D06);
-			b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
-					(code << 8 | 0x74));
-			b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
-					(code << 8 | 0x74));
+			/* specs say about 2 loops, but wl does 4 */
+			for (i = 0; i < 4; i++)
+				b43_phy_write(dev, B43_NPHY_TABLE_DATALO,
+							(code << 8 | 0x74));
 		}
 
 		if (dev->phy.rev == 2) {
 			for (i = 0; i < 4; i++) {
 				b43_phy_write(dev, B43_NPHY_TABLE_ADDR,
 						(0x0400 * i) + 0x0020);
-				for (j = 0; j < 21; j++)
+				for (j = 0; j < 21; j++) {
+					tmp = j * (i < 2 ? 3 : 1);
 					b43_phy_write(dev,
-						B43_NPHY_TABLE_DATALO, 3 * j);
+						B43_NPHY_TABLE_DATALO, tmp);
+				}
 			}
 
 			b43_nphy_set_rf_sequence(dev, 5,
@@ -1026,7 +1308,7 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
 	u8 events2[7] = { 0x0, 0x3, 0x5, 0x4, 0x2, 0x1, 0x8 };
 	u8 delays2[7] = { 0x8, 0x6, 0x2, 0x4, 0x4, 0x6, 0x1 };
 
-	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
 		b43_nphy_classifier(dev, 1, 0);
 	else
 		b43_nphy_classifier(dev, 1, 1);
@@ -1049,29 +1331,18 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
 			b43_radio_set(dev, B2055_C2_TX_RF_SPARE, 0x8);
 		}
 
-		/* TODO: convert to b43_ntab_write? */
-		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2000);
-		b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x000A);
-		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2010);
-		b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x000A);
-		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2002);
-		b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0xCDAA);
-		b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2012);
-		b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0xCDAA);
+		b43_ntab_write(dev, B43_NTAB16(8, 0x00), 0x000A);
+		b43_ntab_write(dev, B43_NTAB16(8, 0x10), 0x000A);
+		b43_ntab_write(dev, B43_NTAB16(8, 0x02), 0xCDAA);
+		b43_ntab_write(dev, B43_NTAB16(8, 0x12), 0xCDAA);
 
 		if (dev->phy.rev < 2) {
-			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2008);
-			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0000);
-			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2018);
-			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0000);
-			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2007);
-			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x7AAB);
-			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2017);
-			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x7AAB);
-			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2006);
-			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0800);
-			b43_phy_write(dev, B43_NPHY_TABLE_ADDR, 0x2016);
-			b43_phy_write(dev, B43_NPHY_TABLE_DATALO, 0x0800);
+			b43_ntab_write(dev, B43_NTAB16(8, 0x08), 0x0000);
+			b43_ntab_write(dev, B43_NTAB16(8, 0x18), 0x0000);
+			b43_ntab_write(dev, B43_NTAB16(8, 0x07), 0x7AAB);
+			b43_ntab_write(dev, B43_NTAB16(8, 0x17), 0x7AAB);
+			b43_ntab_write(dev, B43_NTAB16(8, 0x06), 0x0800);
+			b43_ntab_write(dev, B43_NTAB16(8, 0x16), 0x0800);
 		}
 
 		b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8);
@@ -1565,19 +1836,20 @@ static void b43_nphy_rf_control_intc_override(struct b43_wldev *dev, u8 field,
 	}
 }
 
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BPHYInit */
 static void b43_nphy_bphy_init(struct b43_wldev *dev)
 {
 	unsigned int i;
 	u16 val;
 
 	val = 0x1E1F;
-	for (i = 0; i < 14; i++) {
+	for (i = 0; i < 16; i++) {
 		b43_phy_write(dev, B43_PHY_N_BMODE(0x88 + i), val);
 		val -= 0x202;
 	}
 	val = 0x3E3F;
 	for (i = 0; i < 16; i++) {
-		b43_phy_write(dev, B43_PHY_N_BMODE(0x97 + i), val);
+		b43_phy_write(dev, B43_PHY_N_BMODE(0x98 + i), val);
 		val -= 0x202;
 	}
 	b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668);
@@ -1585,7 +1857,8 @@ static void b43_nphy_bphy_init(struct b43_wldev *dev)
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/ScaleOffsetRssi */
 static void b43_nphy_scale_offset_rssi(struct b43_wldev *dev, u16 scale,
-				       s8 offset, u8 core, u8 rail, u8 type)
+					s8 offset, u8 core, u8 rail,
+					enum b43_nphy_rssi_type type)
 {
 	u16 tmp;
 	bool core1or5 = (core == 1) || (core == 5);
@@ -1594,53 +1867,59 @@ static void b43_nphy_scale_offset_rssi(struct b43_wldev *dev, u16 scale,
 	offset = clamp_val(offset, -32, 31);
 	tmp = ((scale & 0x3F) << 8) | (offset & 0x3F);
 
-	if (core1or5 && (rail == 0) && (type == 2))
+	if (core1or5 && (rail == 0) && (type == B43_NPHY_RSSI_Z))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Z, tmp);
-	if (core1or5 && (rail == 1) && (type == 2))
+	if (core1or5 && (rail == 1) && (type == B43_NPHY_RSSI_Z))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Z, tmp);
-	if (core2or5 && (rail == 0) && (type == 2))
+	if (core2or5 && (rail == 0) && (type == B43_NPHY_RSSI_Z))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_Z, tmp);
-	if (core2or5 && (rail == 1) && (type == 2))
+	if (core2or5 && (rail == 1) && (type == B43_NPHY_RSSI_Z))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Z, tmp);
-	if (core1or5 && (rail == 0) && (type == 0))
+
+	if (core1or5 && (rail == 0) && (type == B43_NPHY_RSSI_X))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_X, tmp);
-	if (core1or5 && (rail == 1) && (type == 0))
+	if (core1or5 && (rail == 1) && (type == B43_NPHY_RSSI_X))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_X, tmp);
-	if (core2or5 && (rail == 0) && (type == 0))
+	if (core2or5 && (rail == 0) && (type == B43_NPHY_RSSI_X))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_X, tmp);
-	if (core2or5 && (rail == 1) && (type == 0))
+	if (core2or5 && (rail == 1) && (type == B43_NPHY_RSSI_X))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_X, tmp);
-	if (core1or5 && (rail == 0) && (type == 1))
+
+	if (core1or5 && (rail == 0) && (type == B43_NPHY_RSSI_Y))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_RSSI_Y, tmp);
-	if (core1or5 && (rail == 1) && (type == 1))
+	if (core1or5 && (rail == 1) && (type == B43_NPHY_RSSI_Y))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_RSSI_Y, tmp);
-	if (core2or5 && (rail == 0) && (type == 1))
+	if (core2or5 && (rail == 0) && (type == B43_NPHY_RSSI_Y))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_RSSI_Y, tmp);
-	if (core2or5 && (rail == 1) && (type == 1))
+	if (core2or5 && (rail == 1) && (type == B43_NPHY_RSSI_Y))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_RSSI_Y, tmp);
-	if (core1or5 && (rail == 0) && (type == 6))
+
+	if (core1or5 && (rail == 0) && (type == B43_NPHY_RSSI_TBD))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_TBD, tmp);
-	if (core1or5 && (rail == 1) && (type == 6))
+	if (core1or5 && (rail == 1) && (type == B43_NPHY_RSSI_TBD))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_TBD, tmp);
-	if (core2or5 && (rail == 0) && (type == 6))
+	if (core2or5 && (rail == 0) && (type == B43_NPHY_RSSI_TBD))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_TBD, tmp);
-	if (core2or5 && (rail == 1) && (type == 6))
+	if (core2or5 && (rail == 1) && (type == B43_NPHY_RSSI_TBD))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_TBD, tmp);
-	if (core1or5 && (rail == 0) && (type == 3))
+
+	if (core1or5 && (rail == 0) && (type == B43_NPHY_RSSI_PWRDET))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_PWRDET, tmp);
-	if (core1or5 && (rail == 1) && (type == 3))
+	if (core1or5 && (rail == 1) && (type == B43_NPHY_RSSI_PWRDET))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_PWRDET, tmp);
-	if (core2or5 && (rail == 0) && (type == 3))
+	if (core2or5 && (rail == 0) && (type == B43_NPHY_RSSI_PWRDET))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_PWRDET, tmp);
-	if (core2or5 && (rail == 1) && (type == 3))
+	if (core2or5 && (rail == 1) && (type == B43_NPHY_RSSI_PWRDET))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_PWRDET, tmp);
-	if (core1or5 && (type == 4))
+
+	if (core1or5 && (type == B43_NPHY_RSSI_TSSI_I))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0I_TSSI, tmp);
-	if (core2or5 && (type == 4))
+	if (core2or5 && (type == B43_NPHY_RSSI_TSSI_I))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1I_TSSI, tmp);
-	if (core1or5 && (type == 5))
+
+	if (core1or5 && (type == B43_NPHY_RSSI_TSSI_Q))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_0Q_TSSI, tmp);
-	if (core2or5 && (type == 5))
+	if (core2or5 && (type == B43_NPHY_RSSI_TSSI_Q))
 		b43_phy_write(dev, B43_NPHY_RSSIMC_1Q_TSSI, tmp);
 }
 
@@ -1668,27 +1947,39 @@ static void b43_nphy_rev2_rssi_select(struct b43_wldev *dev, u8 code, u8 type)
 				(type + 1) << 4);
 	}
 
-	/* TODO use some definitions */
 	if (code == 0) {
-		b43_phy_maskset(dev, B43_NPHY_AFECTL_OVER, 0xCFFF, 0);
+		b43_phy_mask(dev, B43_NPHY_AFECTL_OVER, ~0x3000);
 		if (type < 3) {
-			b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD, 0xFEC7, 0);
-			b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER, 0xEFDC, 0);
-			b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD, 0xFFFE, 0);
+			b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
+				~(B43_NPHY_RFCTL_CMD_RXEN |
+				  B43_NPHY_RFCTL_CMD_CORESEL));
+			b43_phy_mask(dev, B43_NPHY_RFCTL_OVER,
+				~(0x1 << 12 |
+				  0x1 << 5 |
+				  0x1 << 1 |
+				  0x1));
+			b43_phy_mask(dev, B43_NPHY_RFCTL_CMD,
+				~B43_NPHY_RFCTL_CMD_START);
 			udelay(20);
-			b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER, 0xFFFE, 0);
+			b43_phy_mask(dev, B43_NPHY_RFCTL_OVER, ~0x1);
 		}
 	} else {
-		b43_phy_maskset(dev, B43_NPHY_AFECTL_OVER, 0xCFFF,
-				0x3000);
+		b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x3000);
 		if (type < 3) {
 			b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD,
-					0xFEC7, 0x0180);
-			b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER,
-					0xEFDC, (code << 1 | 0x1021));
-			b43_phy_maskset(dev, B43_NPHY_RFCTL_CMD, 0xFFFE, 0x1);
+				~(B43_NPHY_RFCTL_CMD_RXEN |
+				  B43_NPHY_RFCTL_CMD_CORESEL),
+				(B43_NPHY_RFCTL_CMD_RXEN |
+				 code << B43_NPHY_RFCTL_CMD_CORESEL_SHIFT));
+			b43_phy_set(dev, B43_NPHY_RFCTL_OVER,
+				(0x1 << 12 |
+				  0x1 << 5 |
+				  0x1 << 1 |
+				  0x1));
+			b43_phy_set(dev, B43_NPHY_RFCTL_CMD,
+				B43_NPHY_RFCTL_CMD_START);
 			udelay(20);
-			b43_phy_maskset(dev, B43_NPHY_RFCTL_OVER, 0xFFFE, 0);
+			b43_phy_mask(dev, B43_NPHY_RFCTL_OVER, ~0x1);
 		}
 	}
 }
@@ -1837,6 +2128,14 @@ static int b43_nphy_poll_rssi(struct b43_wldev *dev, u8 type, s32 *buf,
 		save_regs_phy[5] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
 		save_regs_phy[6] = b43_phy_read(dev, B43_NPHY_TXF_40CO_B1S0);
 		save_regs_phy[7] = b43_phy_read(dev, B43_NPHY_TXF_40CO_B32S1);
+	} else if (dev->phy.rev == 2) {
+		save_regs_phy[0] = b43_phy_read(dev, B43_NPHY_AFECTL_C1);
+		save_regs_phy[1] = b43_phy_read(dev, B43_NPHY_AFECTL_C2);
+		save_regs_phy[2] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+		save_regs_phy[3] = b43_phy_read(dev, B43_NPHY_RFCTL_CMD);
+		save_regs_phy[4] = b43_phy_read(dev, B43_NPHY_RFCTL_OVER);
+		save_regs_phy[5] = b43_phy_read(dev, B43_NPHY_RFCTL_RSSIO1);
+		save_regs_phy[6] = b43_phy_read(dev, B43_NPHY_RFCTL_RSSIO2);
 	}
 
 	b43_nphy_rssi_select(dev, 5, type);
@@ -1880,6 +2179,14 @@ static int b43_nphy_poll_rssi(struct b43_wldev *dev, u8 type, s32 *buf,
 		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, save_regs_phy[5]);
 		b43_phy_write(dev, B43_NPHY_TXF_40CO_B1S0, save_regs_phy[6]);
 		b43_phy_write(dev, B43_NPHY_TXF_40CO_B32S1, save_regs_phy[7]);
+	} else if (dev->phy.rev == 2) {
+		b43_phy_write(dev, B43_NPHY_AFECTL_C1, save_regs_phy[0]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_C2, save_regs_phy[1]);
+		b43_phy_write(dev, B43_NPHY_AFECTL_OVER, save_regs_phy[2]);
+		b43_phy_write(dev, B43_NPHY_RFCTL_CMD, save_regs_phy[3]);
+		b43_phy_write(dev, B43_NPHY_RFCTL_OVER, save_regs_phy[4]);
+		b43_phy_write(dev, B43_NPHY_RFCTL_RSSIO1, save_regs_phy[5]);
+		b43_phy_write(dev, B43_NPHY_RFCTL_RSSIO2, save_regs_phy[6]);
 	}
 
 	return out;
@@ -1894,7 +2201,10 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
 	u16 class, override;
 	u8 regs_save_radio[2];
 	u16 regs_save_phy[2];
+
 	s8 offset[4];
+	u8 core;
+	u8 rail;
 
 	u16 clip_state[2];
 	u16 clip_off[2] = { 0xFFFF, 0xFFFF };
@@ -1995,16 +2305,15 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
 		if (results_min[i] == 248)
 			offset[i] = code - 32;
 
-		if (i % 2 == 0)
-			b43_nphy_scale_offset_rssi(dev, 0, offset[i], 1, 0,
-							type);
-		else
-			b43_nphy_scale_offset_rssi(dev, 0, offset[i], 2, 1,
-							type);
+		core = (i / 2) ? 2 : 1;
+		rail = (i % 2) ? 1 : 0;
+
+		b43_nphy_scale_offset_rssi(dev, 0, offset[i], core, rail,
+						type);
 	}
 
 	b43_radio_maskset(dev, B2055_C1_PD_RSSIMISC, 0xF8, state[0]);
-	b43_radio_maskset(dev, B2055_C1_PD_RSSIMISC, 0xF8, state[1]);
+	b43_radio_maskset(dev, B2055_C2_PD_RSSIMISC, 0xF8, state[1]);
 
 	switch (state[2]) {
 	case 1:
@@ -2042,6 +2351,9 @@ static void b43_nphy_rev2_rssi_cal(struct b43_wldev *dev, u8 type)
 
 	b43_nphy_classifier(dev, 7, class);
 	b43_nphy_write_clip_detection(dev, clip_state);
+	/* Specs don't say about reset here, but it makes wl and b43 dumps
+	   identical, it really seems wl performs this */
+	b43_nphy_reset_cca(dev);
 }
 
 /* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RSSICalRev3 */
@@ -2059,9 +2371,9 @@ static void b43_nphy_rssi_cal(struct b43_wldev *dev)
 	if (dev->phy.rev >= 3) {
 		b43_nphy_rev3_rssi_cal(dev);
 	} else {
-		b43_nphy_rev2_rssi_cal(dev, 2);
-		b43_nphy_rev2_rssi_cal(dev, 0);
-		b43_nphy_rev2_rssi_cal(dev, 1);
+		b43_nphy_rev2_rssi_cal(dev, B43_NPHY_RSSI_Z);
+		b43_nphy_rev2_rssi_cal(dev, B43_NPHY_RSSI_X);
+		b43_nphy_rev2_rssi_cal(dev, B43_NPHY_RSSI_Y);
 	}
 }
 
@@ -2295,7 +2607,7 @@ static void b43_nphy_int_pa_set_tx_dig_filters(struct b43_wldev *dev)
 {
 	int i, j;
 	/* B43_NPHY_TXF_20CO_S0A1, B43_NPHY_TXF_40CO_S0A1, unknown */
-	u16 offset[] = { 0x186, 0x195, 0x2C5 };
+	static const u16 offset[] = { 0x186, 0x195, 0x2C5 };
 
 	for (i = 0; i < 3; i++)
 		for (j = 0; j < 15; j++)
@@ -2327,7 +2639,7 @@ static struct nphy_txgains b43_nphy_get_tx_gains(struct b43_wldev *dev)
 	struct nphy_txgains target;
 	const u32 *table = NULL;
 
-	if (nphy->txpwrctrl == 0) {
+	if (!nphy->txpwrctrl) {
 		int i;
 
 		if (nphy->hang_avoid)
@@ -2884,7 +3196,7 @@ static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
 	u8 rfctl[2];
 	u8 afectl_core;
 	u16 tmp[6];
-	u16 cur_hpf1, cur_hpf2, cur_lna;
+	u16 uninitialized_var(cur_hpf1), uninitialized_var(cur_hpf2), cur_lna;
 	u32 real, imag;
 	enum ieee80211_band band;
 
@@ -3077,9 +3389,9 @@ static void b43_nphy_mac_phy_clock_set(struct b43_wldev *dev, bool on)
 {
 	u32 tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
 	if (on)
-		tmslow |= SSB_TMSLOW_PHYCLK;
+		tmslow |= B43_TMSLOW_MACPHYCLKEN;
 	else
-		tmslow &= ~SSB_TMSLOW_PHYCLK;
+		tmslow &= ~B43_TMSLOW_MACPHYCLKEN;
 	ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
 }
 
@@ -3088,7 +3400,7 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
 {
 	struct b43_phy *phy = &dev->phy;
 	struct b43_phy_n *nphy = phy->n;
-	u16 buf[16];
+	/* u16 buf[16]; it's rev3+ */
 
 	nphy->phyrxchain = mask;
 
@@ -3232,10 +3544,12 @@ int b43_phy_initn(struct b43_wldev *dev)
 
 	b43_nphy_classifier(dev, 0, 0);
 	b43_nphy_read_clip_detection(dev, clip);
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+		b43_nphy_bphy_init(dev);
+
 	tx_pwr_state = nphy->txpwrctrl;
-	/* TODO N PHY TX power control with argument 0
-		(turning off power control) */
-	/* TODO Fix the TX Power Settings */
+	b43_nphy_tx_power_ctrl(dev, false);
+	b43_nphy_tx_power_fix(dev);
 	/* TODO N PHY TX Power Control Idle TSSI */
 	/* TODO N PHY TX Power Control Setup */
 
@@ -3292,21 +3606,18 @@ int b43_phy_initn(struct b43_wldev *dev)
 					/* TODO N PHY Pre Calibrate TX Gain */
 					target = b43_nphy_get_tx_gains(dev);
 				}
-			}
+				if (!b43_nphy_cal_tx_iq_lo(dev, target, true, false))
+					if (b43_nphy_cal_rx_iq(dev, target, 2, 0) == 0)
+						b43_nphy_save_cal(dev);
+			} else if (nphy->mphase_cal_phase_id == 0)
+				;/* N PHY Periodic Calibration with arg 3 */
+		} else {
+			b43_nphy_restore_cal(dev);
 		}
 	}
 
-	if (!b43_nphy_cal_tx_iq_lo(dev, target, true, false)) {
-		if (b43_nphy_cal_rx_iq(dev, target, 2, 0) == 0)
-			b43_nphy_save_cal(dev);
-		else if (nphy->mphase_cal_phase_id == 0)
-			;/* N PHY Periodic Calibration with argument 3 */
-	} else {
-		b43_nphy_restore_cal(dev);
-	}
-
 	b43_nphy_tx_pwr_ctrl_coef_setup(dev);
-	/* TODO N PHY TX Power Control Enable with argument tx_pwr_state */
+	b43_nphy_tx_power_ctrl(dev, tx_pwr_state);
 	b43_phy_write(dev, B43_NPHY_TXMACIF_HOLDOFF, 0x0015);
 	b43_phy_write(dev, B43_NPHY_TXMACDELAY, 0x0320);
 	if (phy->rev >= 3 && phy->rev <= 6)
@@ -3315,7 +3626,6 @@ int b43_phy_initn(struct b43_wldev *dev)
 	if (phy->rev >= 3)
 		b43_nphy_spur_workaround(dev);
 
-	b43err(dev->wl, "IEEE 802.11n devices are not supported, yet.\n");
 	return 0;
 }
 
@@ -3357,7 +3667,7 @@ static void b43_nphy_channel_setup(struct b43_wldev *dev,
 			b43_phy_mask(dev, B43_PHY_B_TEST, ~0x840);
 	}
 
-	if (nphy->txpwrctrl)
+	if (!nphy->txpwrctrl)
 		b43_nphy_tx_power_fix(dev);
 
 	if (dev->phy.rev < 3)
@@ -3381,7 +3691,6 @@ static int b43_nphy_set_channel(struct b43_wldev *dev,
 				enum nl80211_channel_type channel_type)
 {
 	struct b43_phy *phy = &dev->phy;
-	struct b43_phy_n *nphy = dev->phy.n;
 
 	const struct b43_nphy_channeltab_entry_rev2 *tabent_r2;
 	const struct b43_nphy_channeltab_entry_rev3 *tabent_r3;
@@ -3391,7 +3700,6 @@ static int b43_nphy_set_channel(struct b43_wldev *dev,
 	if (dev->phy.rev >= 3) {
 		tabent_r3 = b43_nphy_get_chantabent_rev3(dev,
 							channel->center_freq);
-		tabent_r3 = NULL;
 		if (!tabent_r3)
 			return -ESRCH;
 	} else {
@@ -3420,7 +3728,7 @@ static int b43_nphy_set_channel(struct b43_wldev *dev,
 	if (dev->phy.rev >= 3) {
 		tmp = (channel->band == IEEE80211_BAND_5GHZ) ? 4 : 0;
 		b43_radio_maskset(dev, 0x08, 0xFFFB, tmp);
-		/* TODO: PHY Radio2056 Setup (dev, tabent_r3); */
+		b43_radio_2056_setup(dev, tabent_r3);
 		b43_nphy_channel_setup(dev, &(tabent_r3->phy_regs), channel);
 	} else {
 		tmp = (channel->band == IEEE80211_BAND_5GHZ) ? 0x0020 : 0x0050;
@@ -3451,7 +3759,11 @@ static void b43_nphy_op_prepare_structs(struct b43_wldev *dev)
 
 	memset(nphy, 0, sizeof(*nphy));
 
-	//TODO init struct b43_phy_n
+	nphy->hang_avoid = (phy->rev == 3 || phy->rev == 4);
+	nphy->gain_boost = true; /* this way we follow wl, assume it is true */
+	nphy->txrx_chain = 2; /* sth different than 0 and 1 for now */
+	nphy->phyrxchain = 3; /* to avoid b43_nphy_set_rx_core_state like wl */
+	nphy->perical = 2; /* avoid additional rssi cal on init (like wl) */
 }
 
 static void b43_nphy_op_free(struct b43_wldev *dev)
@@ -3500,6 +3812,15 @@ static void b43_nphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
 	b43_write16(dev, B43_MMIO_PHY_DATA, value);
 }
 
+static void b43_nphy_op_maskset(struct b43_wldev *dev, u16 reg, u16 mask,
+				 u16 set)
+{
+	check_phyreg(dev, reg);
+	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+	b43_write16(dev, B43_MMIO_PHY_DATA,
+		    (b43_read16(dev, B43_MMIO_PHY_DATA) & mask) | set);
+}
+
 static u16 b43_nphy_op_radio_read(struct b43_wldev *dev, u16 reg)
 {
 	/* Register 1 is a 32-bit register. */
@@ -3524,8 +3845,6 @@ static void b43_nphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
 static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
 					bool blocked)
 {
-	struct b43_phy_n *nphy = dev->phy.n;
-
 	if (b43_read32(dev, B43_MMIO_MACCTL) & B43_MACCTL_ENABLED)
 		b43err(dev->wl, "MAC not suspended\n");
 
@@ -3596,6 +3915,7 @@ const struct b43_phy_operations b43_phyops_n = {
 	.init			= b43_nphy_op_init,
 	.phy_read		= b43_nphy_op_read,
 	.phy_write		= b43_nphy_op_write,
+	.phy_maskset		= b43_nphy_op_maskset,
 	.radio_read		= b43_nphy_op_radio_read,
 	.radio_write		= b43_nphy_op_radio_write,
 	.software_rfkill	= b43_nphy_op_software_rfkill,
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index c144e59a708..001e841f118 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -782,7 +782,7 @@ struct b43_phy_n {
 	u16 mphase_txcal_numcmds;
 	u16 mphase_txcal_bestcoeffs[11];
 
-	u8 txpwrctrl;
+	bool txpwrctrl;
 	u16 txcal_bbmult;
 	u16 txiqlocal_bestc[11];
 	bool txiqlocal_coeffsvalid;
diff --git a/drivers/net/wireless/b43/radio_2055.c b/drivers/net/wireless/b43/radio_2055.c
index 1b5316586cb..44c6dea6688 100644
--- a/drivers/net/wireless/b43/radio_2055.c
+++ b/drivers/net/wireless/b43/radio_2055.c
@@ -244,7 +244,7 @@ static const struct b2055_inittab_entry b2055_inittab [] = {
   [0xCB]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
   [0xCC]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
   [B2055_C1_LNA_GAINBST]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
-  [0xCE]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+  [0xCE]			= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
   [0xCF]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
   [0xD0]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
   [0xD1]			= { .ghz5 = 0x0018, .ghz2 = 0x0018, NOUPLOAD, },
@@ -256,7 +256,7 @@ static const struct b2055_inittab_entry b2055_inittab [] = {
   [0xD7]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
   [0xD8]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
   [B2055_C2_LNA_GAINBST]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
-  [0xDA]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+  [0xDA]			= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
   [0xDB]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
   [0xDC]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
   [0xDD]			= { .ghz5 = 0x0018, .ghz2 = 0x0018, NOUPLOAD, },
@@ -304,178 +304,178 @@ static const struct b43_nphy_channeltab_entry_rev2 b43_nphy_channeltab_rev2[] =
   {	.channel		= 184,
 	.freq			= 4920, /* MHz */
 	.unk2			= 3280,
-	RADIOREGS(0x71, 0x01, 0xEC, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xEC, 0x01, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xFF, 0xFF, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xB407, 0xB007, 0xAC07, 0x1402, 0x1502, 0x1602),
+	PHYREGS(0x07B4, 0x07B0, 0x07AC, 0x0214, 0x0215, 0x0216),
   },
   {	.channel		= 186,
 	.freq			= 4930, /* MHz */
 	.unk2			= 3287,
-	RADIOREGS(0x71, 0x01, 0xED, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xED, 0x01, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xFF, 0xFF, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xB807, 0xB407, 0xB007, 0x1302, 0x1402, 0x1502),
+	PHYREGS(0x07B8, 0x07B4, 0x07B0, 0x0213, 0x0214, 0x0215),
   },
   {	.channel		= 188,
 	.freq			= 4940, /* MHz */
 	.unk2			= 3293,
-	RADIOREGS(0x71, 0x01, 0xEE, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xEE, 0x01, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xEE, 0xEE, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xBC07, 0xB807, 0xB407, 0x1202, 0x1302, 0x1402),
+	PHYREGS(0x07BC, 0x07B8, 0x07B4, 0x0212, 0x0213, 0x0214),
   },
   {	.channel		= 190,
 	.freq			= 4950, /* MHz */
 	.unk2			= 3300,
-	RADIOREGS(0x71, 0x01, 0xEF, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xEF, 0x01, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xEE, 0xEE, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xC007, 0xBC07, 0xB807, 0x1102, 0x1202, 0x1302),
+	PHYREGS(0x07C0, 0x07BC, 0x07B8, 0x0211, 0x0212, 0x0213),
   },
   {	.channel		= 192,
 	.freq			= 4960, /* MHz */
 	.unk2			= 3307,
-	RADIOREGS(0x71, 0x01, 0xF0, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xF0, 0x01, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xEE, 0xEE, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xC407, 0xC007, 0xBC07, 0x0F02, 0x1102, 0x1202),
+	PHYREGS(0x07C4, 0x07C0, 0x07BC, 0x020F, 0x0211, 0x0212),
   },
   {	.channel		= 194,
 	.freq			= 4970, /* MHz */
 	.unk2			= 3313,
-	RADIOREGS(0x71, 0x01, 0xF1, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xF1, 0x01, 0x0F, 0xFF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xEE, 0xEE, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xC807, 0xC407, 0xC007, 0x0E02, 0x0F02, 0x1102),
+	PHYREGS(0x07C8, 0x07C4, 0x07C0, 0x020E, 0x020F, 0x0211),
   },
   {	.channel		= 196,
 	.freq			= 4980, /* MHz */
 	.unk2			= 3320,
-	RADIOREGS(0x71, 0x01, 0xF2, 0x0E, 0xFF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xF2, 0x01, 0x0E, 0xFF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xDD, 0xDD, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xCC07, 0xC807, 0xC407, 0x0D02, 0x0E02, 0x0F02),
+	PHYREGS(0x07CC, 0x07C8, 0x07C4, 0x020D, 0x020E, 0x020F),
   },
   {	.channel		= 198,
 	.freq			= 4990, /* MHz */
 	.unk2			= 3327,
-	RADIOREGS(0x71, 0x01, 0xF3, 0x0E, 0xFF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xF3, 0x01, 0x0E, 0xFF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xDD, 0xDD, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xD007, 0xCC07, 0xC807, 0x0C02, 0x0D02, 0x0E02),
+	PHYREGS(0x07D0, 0x07CC, 0x07C8, 0x020C, 0x020D, 0x020E),
   },
   {	.channel		= 200,
 	.freq			= 5000, /* MHz */
 	.unk2			= 3333,
-	RADIOREGS(0x71, 0x01, 0xF4, 0x0E, 0xFF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xF4, 0x01, 0x0E, 0xFF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xDD, 0xDD, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xD407, 0xD007, 0xCC07, 0x0B02, 0x0C02, 0x0D02),
+	PHYREGS(0x07D4, 0x07D0, 0x07CC, 0x020B, 0x020C, 0x020D),
   },
   {	.channel		= 202,
 	.freq			= 5010, /* MHz */
 	.unk2			= 3340,
-	RADIOREGS(0x71, 0x01, 0xF5, 0x0E, 0xFF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xF5, 0x01, 0x0E, 0xFF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xDD, 0xDD, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xD807, 0xD407, 0xD007, 0x0A02, 0x0B02, 0x0C02),
+	PHYREGS(0x07D8, 0x07D4, 0x07D0, 0x020A, 0x020B, 0x020C),
   },
   {	.channel		= 204,
 	.freq			= 5020, /* MHz */
 	.unk2			= 3347,
-	RADIOREGS(0x71, 0x01, 0xF6, 0x0E, 0xF7, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xF6, 0x01, 0x0E, 0xF7, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xCC, 0xCC, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xDC07, 0xD807, 0xD407, 0x0902, 0x0A02, 0x0B02),
+	PHYREGS(0x07DC, 0x07D8, 0x07D4, 0x0209, 0x020A, 0x020B),
   },
   {	.channel		= 206,
 	.freq			= 5030, /* MHz */
 	.unk2			= 3353,
-	RADIOREGS(0x71, 0x01, 0xF7, 0x0E, 0xF7, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xF7, 0x01, 0x0E, 0xF7, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xCC, 0xCC, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xE007, 0xDC07, 0xD807, 0x0802, 0x0902, 0x0A02),
+	PHYREGS(0x07E0, 0x07DC, 0x07D8, 0x0208, 0x0209, 0x020A),
   },
   {	.channel		= 208,
 	.freq			= 5040, /* MHz */
 	.unk2			= 3360,
-	RADIOREGS(0x71, 0x01, 0xF8, 0x0D, 0xEF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xF8, 0x01, 0x0D, 0xEF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xCC, 0xCC, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xE407, 0xE007, 0xDC07, 0x0702, 0x0802, 0x0902),
+	PHYREGS(0x07E4, 0x07E0, 0x07DC, 0x0207, 0x0208, 0x0209),
   },
   {	.channel		= 210,
 	.freq			= 5050, /* MHz */
 	.unk2			= 3367,
-	RADIOREGS(0x71, 0x01, 0xF9, 0x0D, 0xEF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xF9, 0x01, 0x0D, 0xEF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xCC, 0xCC, 0xFF, 0x00, 0x0F, 0x0F,
 		  0x8F, 0xFF, 0x00, 0x0F, 0x0F, 0x8F),
-	PHYREGS(0xE807, 0xE407, 0xE007, 0x0602, 0x0702, 0x0802),
+	PHYREGS(0x07E8, 0x07E4, 0x07E0, 0x0206, 0x0207, 0x0208),
   },
   {	.channel		= 212,
 	.freq			= 5060, /* MHz */
 	.unk2			= 3373,
-	RADIOREGS(0x71, 0x01, 0xFA, 0x0D, 0xE6, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xFA, 0x01, 0x0D, 0xE6, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xBB, 0xBB, 0xFF, 0x00, 0x0E, 0x0F,
 		  0x8E, 0xFF, 0x00, 0x0E, 0x0F, 0x8E),
-	PHYREGS(0xEC07, 0xE807, 0xE407, 0x0502, 0x0602, 0x0702),
+	PHYREGS(0x07EC, 0x07E8, 0x07E4, 0x0205, 0x0206, 0x0207),
   },
   {	.channel		= 214,
 	.freq			= 5070, /* MHz */
 	.unk2			= 3380,
-	RADIOREGS(0x71, 0x01, 0xFB, 0x0D, 0xE6, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xFB, 0x01, 0x0D, 0xE6, 0x01, 0x04, 0x0A,
 		  0x00, 0x8F, 0xBB, 0xBB, 0xFF, 0x00, 0x0E, 0x0F,
 		  0x8E, 0xFF, 0x00, 0x0E, 0x0F, 0x8E),
-	PHYREGS(0xF007, 0xEC07, 0xE807, 0x0402, 0x0502, 0x0602),
+	PHYREGS(0x07F0, 0x07EC, 0x07E8, 0x0204, 0x0205, 0x0206),
   },
   {	.channel		= 216,
 	.freq			= 5080, /* MHz */
 	.unk2			= 3387,
-	RADIOREGS(0x71, 0x01, 0xFC, 0x0D, 0xDE, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xFC, 0x01, 0x0D, 0xDE, 0x01, 0x04, 0x0A,
 		  0x00, 0x8E, 0xBB, 0xBB, 0xEE, 0x00, 0x0E, 0x0F,
 		  0x8D, 0xEE, 0x00, 0x0E, 0x0F, 0x8D),
-	PHYREGS(0xF407, 0xF007, 0xEC07, 0x0302, 0x0402, 0x0502),
+	PHYREGS(0x07F4, 0x07F0, 0x07EC, 0x0203, 0x0204, 0x0205),
   },
   {	.channel		= 218,
 	.freq			= 5090, /* MHz */
 	.unk2			= 3393,
-	RADIOREGS(0x71, 0x01, 0xFD, 0x0D, 0xDE, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xFD, 0x01, 0x0D, 0xDE, 0x01, 0x04, 0x0A,
 		  0x00, 0x8E, 0xBB, 0xBB, 0xEE, 0x00, 0x0E, 0x0F,
 		  0x8D, 0xEE, 0x00, 0x0E, 0x0F, 0x8D),
-	PHYREGS(0xF807, 0xF407, 0xF007, 0x0202, 0x0302, 0x0402),
+	PHYREGS(0x07F8, 0x07F4, 0x07F0, 0x0202, 0x0203, 0x0204),
   },
   {	.channel		= 220,
 	.freq			= 5100, /* MHz */
 	.unk2			= 3400,
-	RADIOREGS(0x71, 0x01, 0xFE, 0x0C, 0xD6, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xFE, 0x01, 0x0C, 0xD6, 0x01, 0x04, 0x0A,
 		  0x00, 0x8E, 0xAA, 0xAA, 0xEE, 0x00, 0x0D, 0x0F,
 		  0x8D, 0xEE, 0x00, 0x0D, 0x0F, 0x8D),
-	PHYREGS(0xFC07, 0xF807, 0xF407, 0x0102, 0x0202, 0x0302),
+	PHYREGS(0x07FC, 0x07F8, 0x07F4, 0x0201, 0x0202, 0x0203),
   },
   {	.channel		= 222,
 	.freq			= 5110, /* MHz */
 	.unk2			= 3407,
-	RADIOREGS(0x71, 0x01, 0xFF, 0x0C, 0xD6, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0xFF, 0x01, 0x0C, 0xD6, 0x01, 0x04, 0x0A,
 		  0x00, 0x8E, 0xAA, 0xAA, 0xEE, 0x00, 0x0D, 0x0F,
 		  0x8D, 0xEE, 0x00, 0x0D, 0x0F, 0x8D),
-	PHYREGS(0x0008, 0xFC07, 0xF807, 0x0002, 0x0102, 0x0202),
+	PHYREGS(0x0800, 0x07FC, 0x07F8, 0x0200, 0x0201, 0x0202),
   },
   {	.channel		= 224,
 	.freq			= 5120, /* MHz */
 	.unk2			= 3413,
-	RADIOREGS(0x71, 0x02, 0x00, 0x0C, 0xCE, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x00, 0x02, 0x0C, 0xCE, 0x01, 0x04, 0x0A,
 		  0x00, 0x8D, 0xAA, 0xAA, 0xDD, 0x00, 0x0D, 0x0F,
 		  0x8C, 0xDD, 0x00, 0x0D, 0x0F, 0x8C),
-	PHYREGS(0x0408, 0x0008, 0xFC07, 0xFF01, 0x0002, 0x0102),
+	PHYREGS(0x0804, 0x0800, 0x07FC, 0x01FF, 0x0200, 0x0201),
   },
   {	.channel		= 226,
 	.freq			= 5130, /* MHz */
 	.unk2			= 3420,
-	RADIOREGS(0x71, 0x02, 0x01, 0x0C, 0xCE, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x01, 0x02, 0x0C, 0xCE, 0x01, 0x04, 0x0A,
 		  0x00, 0x8D, 0xAA, 0xAA, 0xDD, 0x00, 0x0D, 0x0F,
 		  0x8C, 0xDD, 0x00, 0x0D, 0x0F, 0x8C),
-	PHYREGS(0x0808, 0x0408, 0x0008, 0xFE01, 0xFF01, 0x0002),
+	PHYREGS(0x0808, 0x0804, 0x0800, 0x01FE, 0x01FF, 0x0200),
   },
   {	.channel		= 228,
 	.freq			= 5140, /* MHz */
@@ -483,815 +483,815 @@ static const struct b43_nphy_channeltab_entry_rev2 b43_nphy_channeltab_rev2[] =
 	RADIOREGS(0x71, 0x02, 0x02, 0x0C, 0xC6, 0x01, 0x04, 0x0A,
 		  0x00, 0x8D, 0x99, 0x99, 0xDD, 0x00, 0x0C, 0x0E,
 		  0x8B, 0xDD, 0x00, 0x0C, 0x0E, 0x8B),
-	PHYREGS(0x0C08, 0x0808, 0x0408, 0xFD01, 0xFE01, 0xFF01),
+	PHYREGS(0x080C, 0x0808, 0x0804, 0x01FD, 0x01FE, 0x01FF),
   },
   {	.channel		= 32,
 	.freq			= 5160, /* MHz */
 	.unk2			= 3440,
-	RADIOREGS(0x71, 0x02, 0x04, 0x0B, 0xBE, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x04, 0x02, 0x0B, 0xBE, 0x01, 0x04, 0x0A,
 		  0x00, 0x8C, 0x99, 0x99, 0xCC, 0x00, 0x0B, 0x0D,
 		  0x8A, 0xCC, 0x00, 0x0B, 0x0D, 0x8A),
-	PHYREGS(0x1408, 0x1008, 0x0C08, 0xFB01, 0xFC01, 0xFD01),
+	PHYREGS(0x0814, 0x0810, 0x080C, 0x01FB, 0x01FC, 0x01FD),
   },
   {	.channel		= 34,
 	.freq			= 5170, /* MHz */
 	.unk2			= 3447,
-	RADIOREGS(0x71, 0x02, 0x05, 0x0B, 0xBE, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x05, 0x02, 0x0B, 0xBE, 0x01, 0x04, 0x0A,
 		  0x00, 0x8C, 0x99, 0x99, 0xCC, 0x00, 0x0B, 0x0D,
 		  0x8A, 0xCC, 0x00, 0x0B, 0x0D, 0x8A),
-	PHYREGS(0x1808, 0x1408, 0x1008, 0xFA01, 0xFB01, 0xFC01),
+	PHYREGS(0x0818, 0x0814, 0x0810, 0x01FA, 0x01FB, 0x01FC),
   },
   {	.channel		= 36,
 	.freq			= 5180, /* MHz */
 	.unk2			= 3453,
-	RADIOREGS(0x71, 0x02, 0x06, 0x0B, 0xB6, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x06, 0x02, 0x0B, 0xB6, 0x01, 0x04, 0x0A,
 		  0x00, 0x8C, 0x88, 0x88, 0xCC, 0x00, 0x0B, 0x0C,
 		  0x89, 0xCC, 0x00, 0x0B, 0x0C, 0x89),
-	PHYREGS(0x1C08, 0x1808, 0x1408, 0xF901, 0xFA01, 0xFB01),
+	PHYREGS(0x081C, 0x0818, 0x0814, 0x01F9, 0x01FA, 0x01FB),
   },
   {	.channel		= 38,
 	.freq			= 5190, /* MHz */
 	.unk2			= 3460,
-	RADIOREGS(0x71, 0x02, 0x07, 0x0B, 0xB6, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x07, 0x02, 0x0B, 0xB6, 0x01, 0x04, 0x0A,
 		  0x00, 0x8C, 0x88, 0x88, 0xCC, 0x00, 0x0B, 0x0C,
 		  0x89, 0xCC, 0x00, 0x0B, 0x0C, 0x89),
-	PHYREGS(0x2008, 0x1C08, 0x1808, 0xF801, 0xF901, 0xFA01),
+	PHYREGS(0x0820, 0x081C, 0x0818, 0x01F8, 0x01F9, 0x01FA),
   },
   {	.channel		= 40,
 	.freq			= 5200, /* MHz */
 	.unk2			= 3467,
-	RADIOREGS(0x71, 0x02, 0x08, 0x0B, 0xAF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x08, 0x02, 0x0B, 0xAF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8B, 0x88, 0x88, 0xBB, 0x00, 0x0A, 0x0B,
 		  0x89, 0xBB, 0x00, 0x0A, 0x0B, 0x89),
-	PHYREGS(0x2408, 0x2008, 0x1C08, 0xF701, 0xF801, 0xF901),
+	PHYREGS(0x0824, 0x0820, 0x081C, 0x01F7, 0x01F8, 0x01F9),
   },
   {	.channel		= 42,
 	.freq			= 5210, /* MHz */
 	.unk2			= 3473,
-	RADIOREGS(0x71, 0x02, 0x09, 0x0B, 0xAF, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x09, 0x02, 0x0B, 0xAF, 0x01, 0x04, 0x0A,
 		  0x00, 0x8B, 0x88, 0x88, 0xBB, 0x00, 0x0A, 0x0B,
 		  0x89, 0xBB, 0x00, 0x0A, 0x0B, 0x89),
-	PHYREGS(0x2808, 0x2408, 0x2008, 0xF601, 0xF701, 0xF801),
+	PHYREGS(0x0828, 0x0824, 0x0820, 0x01F6, 0x01F7, 0x01F8),
   },
   {	.channel		= 44,
 	.freq			= 5220, /* MHz */
 	.unk2			= 3480,
-	RADIOREGS(0x71, 0x02, 0x0A, 0x0A, 0xA7, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x0A, 0x02, 0x0A, 0xA7, 0x01, 0x04, 0x0A,
 		  0x00, 0x8B, 0x77, 0x77, 0xBB, 0x00, 0x09, 0x0A,
 		  0x88, 0xBB, 0x00, 0x09, 0x0A, 0x88),
-	PHYREGS(0x2C08, 0x2808, 0x2408, 0xF501, 0xF601, 0xF701),
+	PHYREGS(0x082C, 0x0828, 0x0824, 0x01F5, 0x01F6, 0x01F7),
   },
   {	.channel		= 46,
 	.freq			= 5230, /* MHz */
 	.unk2			= 3487,
-	RADIOREGS(0x71, 0x02, 0x0B, 0x0A, 0xA7, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x0B, 0x02, 0x0A, 0xA7, 0x01, 0x04, 0x0A,
 		  0x00, 0x8B, 0x77, 0x77, 0xBB, 0x00, 0x09, 0x0A,
 		  0x88, 0xBB, 0x00, 0x09, 0x0A, 0x88),
-	PHYREGS(0x3008, 0x2C08, 0x2808, 0xF401, 0xF501, 0xF601),
+	PHYREGS(0x0830, 0x082C, 0x0828, 0x01F4, 0x01F5, 0x01F6),
   },
   {	.channel		= 48,
 	.freq			= 5240, /* MHz */
 	.unk2			= 3493,
-	RADIOREGS(0x71, 0x02, 0x0C, 0x0A, 0xA0, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x0C, 0x02, 0x0A, 0xA0, 0x01, 0x04, 0x0A,
 		  0x00, 0x8A, 0x77, 0x77, 0xAA, 0x00, 0x09, 0x0A,
 		  0x87, 0xAA, 0x00, 0x09, 0x0A, 0x87),
-	PHYREGS(0x3408, 0x3008, 0x2C08, 0xF301, 0xF401, 0xF501),
+	PHYREGS(0x0834, 0x0830, 0x082C, 0x01F3, 0x01F4, 0x01F5),
   },
   {	.channel		= 50,
 	.freq			= 5250, /* MHz */
 	.unk2			= 3500,
-	RADIOREGS(0x71, 0x02, 0x0D, 0x0A, 0xA0, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x0D, 0x02, 0x0A, 0xA0, 0x01, 0x04, 0x0A,
 		  0x00, 0x8A, 0x77, 0x77, 0xAA, 0x00, 0x09, 0x0A,
 		  0x87, 0xAA, 0x00, 0x09, 0x0A, 0x87),
-	PHYREGS(0x3808, 0x3408, 0x3008, 0xF201, 0xF301, 0xF401),
+	PHYREGS(0x0838, 0x0834, 0x0830, 0x01F2, 0x01F3, 0x01F4),
   },
   {	.channel		= 52,
 	.freq			= 5260, /* MHz */
 	.unk2			= 3507,
-	RADIOREGS(0x71, 0x02, 0x0E, 0x0A, 0x98, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x0E, 0x02, 0x0A, 0x98, 0x01, 0x04, 0x0A,
 		  0x00, 0x8A, 0x66, 0x66, 0xAA, 0x00, 0x08, 0x09,
 		  0x87, 0xAA, 0x00, 0x08, 0x09, 0x87),
-	PHYREGS(0x3C08, 0x3808, 0x3408, 0xF101, 0xF201, 0xF301),
+	PHYREGS(0x083C, 0x0838, 0x0834, 0x01F1, 0x01F2, 0x01F3),
   },
   {	.channel		= 54,
 	.freq			= 5270, /* MHz */
 	.unk2			= 3513,
-	RADIOREGS(0x71, 0x02, 0x0F, 0x0A, 0x98, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x0F, 0x02, 0x0A, 0x98, 0x01, 0x04, 0x0A,
 		  0x00, 0x8A, 0x66, 0x66, 0xAA, 0x00, 0x08, 0x09,
 		  0x87, 0xAA, 0x00, 0x08, 0x09, 0x87),
-	PHYREGS(0x4008, 0x3C08, 0x3808, 0xF001, 0xF101, 0xF201),
+	PHYREGS(0x0840, 0x083C, 0x0838, 0x01F0, 0x01F1, 0x01F2),
   },
   {	.channel		= 56,
 	.freq			= 5280, /* MHz */
 	.unk2			= 3520,
-	RADIOREGS(0x71, 0x02, 0x10, 0x09, 0x91, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x10, 0x02, 0x09, 0x91, 0x01, 0x04, 0x0A,
 		  0x00, 0x89, 0x66, 0x66, 0x99, 0x00, 0x08, 0x08,
 		  0x86, 0x99, 0x00, 0x08, 0x08, 0x86),
-	PHYREGS(0x4408, 0x4008, 0x3C08, 0xF001, 0xF001, 0xF101),
+	PHYREGS(0x0844, 0x0840, 0x083C, 0x01F0, 0x01F0, 0x01F1),
   },
   {	.channel		= 58,
 	.freq			= 5290, /* MHz */
 	.unk2			= 3527,
-	RADIOREGS(0x71, 0x02, 0x11, 0x09, 0x91, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x11, 0x02, 0x09, 0x91, 0x01, 0x04, 0x0A,
 		  0x00, 0x89, 0x66, 0x66, 0x99, 0x00, 0x08, 0x08,
 		  0x86, 0x99, 0x00, 0x08, 0x08, 0x86),
-	PHYREGS(0x4808, 0x4408, 0x4008, 0xEF01, 0xF001, 0xF001),
+	PHYREGS(0x0848, 0x0844, 0x0840, 0x01EF, 0x01F0, 0x01F0),
   },
   {	.channel		= 60,
 	.freq			= 5300, /* MHz */
 	.unk2			= 3533,
-	RADIOREGS(0x71, 0x02, 0x12, 0x09, 0x8A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x12, 0x02, 0x09, 0x8A, 0x01, 0x04, 0x0A,
 		  0x00, 0x89, 0x55, 0x55, 0x99, 0x00, 0x08, 0x07,
 		  0x85, 0x99, 0x00, 0x08, 0x07, 0x85),
-	PHYREGS(0x4C08, 0x4808, 0x4408, 0xEE01, 0xEF01, 0xF001),
+	PHYREGS(0x084C, 0x0848, 0x0844, 0x01EE, 0x01EF, 0x01F0),
   },
   {	.channel		= 62,
 	.freq			= 5310, /* MHz */
 	.unk2			= 3540,
-	RADIOREGS(0x71, 0x02, 0x13, 0x09, 0x8A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x13, 0x02, 0x09, 0x8A, 0x01, 0x04, 0x0A,
 		  0x00, 0x89, 0x55, 0x55, 0x99, 0x00, 0x08, 0x07,
 		  0x85, 0x99, 0x00, 0x08, 0x07, 0x85),
-	PHYREGS(0x5008, 0x4C08, 0x4808, 0xED01, 0xEE01, 0xEF01),
+	PHYREGS(0x0850, 0x084C, 0x0848, 0x01ED, 0x01EE, 0x01EF),
   },
   {	.channel		= 64,
 	.freq			= 5320, /* MHz */
 	.unk2			= 3547,
-	RADIOREGS(0x71, 0x02, 0x14, 0x09, 0x83, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x14, 0x02, 0x09, 0x83, 0x01, 0x04, 0x0A,
 		  0x00, 0x88, 0x55, 0x55, 0x88, 0x00, 0x07, 0x07,
 		  0x84, 0x88, 0x00, 0x07, 0x07, 0x84),
-	PHYREGS(0x5408, 0x5008, 0x4C08, 0xEC01, 0xED01, 0xEE01),
+	PHYREGS(0x0854, 0x0850, 0x084C, 0x01EC, 0x01ED, 0x01EE),
   },
   {	.channel		= 66,
 	.freq			= 5330, /* MHz */
 	.unk2			= 3553,
-	RADIOREGS(0x71, 0x02, 0x15, 0x09, 0x83, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x15, 0x02, 0x09, 0x83, 0x01, 0x04, 0x0A,
 		  0x00, 0x88, 0x55, 0x55, 0x88, 0x00, 0x07, 0x07,
 		  0x84, 0x88, 0x00, 0x07, 0x07, 0x84),
-	PHYREGS(0x5808, 0x5408, 0x5008, 0xEB01, 0xEC01, 0xED01),
+	PHYREGS(0x0858, 0x0854, 0x0850, 0x01EB, 0x01EC, 0x01ED),
   },
   {	.channel		= 68,
 	.freq			= 5340, /* MHz */
 	.unk2			= 3560,
-	RADIOREGS(0x71, 0x02, 0x16, 0x08, 0x7C, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x16, 0x02, 0x08, 0x7C, 0x01, 0x04, 0x0A,
 		  0x00, 0x88, 0x44, 0x44, 0x88, 0x00, 0x07, 0x06,
 		  0x84, 0x88, 0x00, 0x07, 0x06, 0x84),
-	PHYREGS(0x5C08, 0x5808, 0x5408, 0xEA01, 0xEB01, 0xEC01),
+	PHYREGS(0x085C, 0x0858, 0x0854, 0x01EA, 0x01EB, 0x01EC),
   },
   {	.channel		= 70,
 	.freq			= 5350, /* MHz */
 	.unk2			= 3567,
-	RADIOREGS(0x71, 0x02, 0x17, 0x08, 0x7C, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x17, 0x02, 0x08, 0x7C, 0x01, 0x04, 0x0A,
 		  0x00, 0x88, 0x44, 0x44, 0x88, 0x00, 0x07, 0x06,
 		  0x84, 0x88, 0x00, 0x07, 0x06, 0x84),
-	PHYREGS(0x6008, 0x5C08, 0x5808, 0xE901, 0xEA01, 0xEB01),
+	PHYREGS(0x0860, 0x085C, 0x0858, 0x01E9, 0x01EA, 0x01EB),
   },
   {	.channel		= 72,
 	.freq			= 5360, /* MHz */
 	.unk2			= 3573,
-	RADIOREGS(0x71, 0x02, 0x18, 0x08, 0x75, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x18, 0x02, 0x08, 0x75, 0x01, 0x04, 0x0A,
 		  0x00, 0x87, 0x44, 0x44, 0x77, 0x00, 0x06, 0x05,
 		  0x83, 0x77, 0x00, 0x06, 0x05, 0x83),
-	PHYREGS(0x6408, 0x6008, 0x5C08, 0xE801, 0xE901, 0xEA01),
+	PHYREGS(0x0864, 0x0860, 0x085C, 0x01E8, 0x01E9, 0x01EA),
   },
   {	.channel		= 74,
 	.freq			= 5370, /* MHz */
 	.unk2			= 3580,
-	RADIOREGS(0x71, 0x02, 0x19, 0x08, 0x75, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x19, 0x02, 0x08, 0x75, 0x01, 0x04, 0x0A,
 		  0x00, 0x87, 0x44, 0x44, 0x77, 0x00, 0x06, 0x05,
 		  0x83, 0x77, 0x00, 0x06, 0x05, 0x83),
-	PHYREGS(0x6808, 0x6408, 0x6008, 0xE701, 0xE801, 0xE901),
+	PHYREGS(0x0868, 0x0864, 0x0860, 0x01E7, 0x01E8, 0x01E9),
   },
   {	.channel		= 76,
 	.freq			= 5380, /* MHz */
 	.unk2			= 3587,
-	RADIOREGS(0x71, 0x02, 0x1A, 0x08, 0x6E, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x1A, 0x02, 0x08, 0x6E, 0x01, 0x04, 0x0A,
 		  0x00, 0x87, 0x33, 0x33, 0x77, 0x00, 0x06, 0x04,
 		  0x82, 0x77, 0x00, 0x06, 0x04, 0x82),
-	PHYREGS(0x6C08, 0x6808, 0x6408, 0xE601, 0xE701, 0xE801),
+	PHYREGS(0x086C, 0x0868, 0x0864, 0x01E6, 0x01E7, 0x01E8),
   },
   {	.channel		= 78,
 	.freq			= 5390, /* MHz */
 	.unk2			= 3593,
-	RADIOREGS(0x71, 0x02, 0x1B, 0x08, 0x6E, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x1B, 0x02, 0x08, 0x6E, 0x01, 0x04, 0x0A,
 		  0x00, 0x87, 0x33, 0x33, 0x77, 0x00, 0x06, 0x04,
 		  0x82, 0x77, 0x00, 0x06, 0x04, 0x82),
-	PHYREGS(0x7008, 0x6C08, 0x6808, 0xE501, 0xE601, 0xE701),
+	PHYREGS(0x0870, 0x086C, 0x0868, 0x01E5, 0x01E6, 0x01E7),
   },
   {	.channel		= 80,
 	.freq			= 5400, /* MHz */
 	.unk2			= 3600,
-	RADIOREGS(0x71, 0x02, 0x1C, 0x07, 0x67, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x1C, 0x02, 0x07, 0x67, 0x01, 0x04, 0x0A,
 		  0x00, 0x86, 0x33, 0x33, 0x66, 0x00, 0x05, 0x04,
 		  0x81, 0x66, 0x00, 0x05, 0x04, 0x81),
-	PHYREGS(0x7408, 0x7008, 0x6C08, 0xE501, 0xE501, 0xE601),
+	PHYREGS(0x0874, 0x0870, 0x086C, 0x01E5, 0x01E5, 0x01E6),
   },
   {	.channel		= 82,
 	.freq			= 5410, /* MHz */
 	.unk2			= 3607,
-	RADIOREGS(0x71, 0x02, 0x1D, 0x07, 0x67, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x1D, 0x02, 0x07, 0x67, 0x01, 0x04, 0x0A,
 		  0x00, 0x86, 0x33, 0x33, 0x66, 0x00, 0x05, 0x04,
 		  0x81, 0x66, 0x00, 0x05, 0x04, 0x81),
-	PHYREGS(0x7808, 0x7408, 0x7008, 0xE401, 0xE501, 0xE501),
+	PHYREGS(0x0878, 0x0874, 0x0870, 0x01E4, 0x01E5, 0x01E5),
   },
   {	.channel		= 84,
 	.freq			= 5420, /* MHz */
 	.unk2			= 3613,
-	RADIOREGS(0x71, 0x02, 0x1E, 0x07, 0x61, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x1E, 0x02, 0x07, 0x61, 0x01, 0x04, 0x0A,
 		  0x00, 0x86, 0x22, 0x22, 0x66, 0x00, 0x05, 0x03,
 		  0x80, 0x66, 0x00, 0x05, 0x03, 0x80),
-	PHYREGS(0x7C08, 0x7808, 0x7408, 0xE301, 0xE401, 0xE501),
+	PHYREGS(0x087C, 0x0878, 0x0874, 0x01E3, 0x01E4, 0x01E5),
   },
   {	.channel		= 86,
 	.freq			= 5430, /* MHz */
 	.unk2			= 3620,
-	RADIOREGS(0x71, 0x02, 0x1F, 0x07, 0x61, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x1F, 0x02, 0x07, 0x61, 0x01, 0x04, 0x0A,
 		  0x00, 0x86, 0x22, 0x22, 0x66, 0x00, 0x05, 0x03,
 		  0x80, 0x66, 0x00, 0x05, 0x03, 0x80),
-	PHYREGS(0x8008, 0x7C08, 0x7808, 0xE201, 0xE301, 0xE401),
+	PHYREGS(0x0880, 0x087C, 0x0878, 0x01E2, 0x01E3, 0x01E4),
   },
   {	.channel		= 88,
 	.freq			= 5440, /* MHz */
 	.unk2			= 3627,
-	RADIOREGS(0x71, 0x02, 0x20, 0x07, 0x5A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x20, 0x02, 0x07, 0x5A, 0x01, 0x04, 0x0A,
 		  0x00, 0x85, 0x22, 0x22, 0x55, 0x00, 0x04, 0x02,
 		  0x80, 0x55, 0x00, 0x04, 0x02, 0x80),
-	PHYREGS(0x8408, 0x8008, 0x7C08, 0xE101, 0xE201, 0xE301),
+	PHYREGS(0x0884, 0x0880, 0x087C, 0x01E1, 0x01E2, 0x01E3),
   },
   {	.channel		= 90,
 	.freq			= 5450, /* MHz */
 	.unk2			= 3633,
-	RADIOREGS(0x71, 0x02, 0x21, 0x07, 0x5A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x21, 0x02, 0x07, 0x5A, 0x01, 0x04, 0x0A,
 		  0x00, 0x85, 0x22, 0x22, 0x55, 0x00, 0x04, 0x02,
 		  0x80, 0x55, 0x00, 0x04, 0x02, 0x80),
-	PHYREGS(0x8808, 0x8408, 0x8008, 0xE001, 0xE101, 0xE201),
+	PHYREGS(0x0888, 0x0884, 0x0880, 0x01E0, 0x01E1, 0x01E2),
   },
   {	.channel		= 92,
 	.freq			= 5460, /* MHz */
 	.unk2			= 3640,
-	RADIOREGS(0x71, 0x02, 0x22, 0x06, 0x53, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x22, 0x02, 0x06, 0x53, 0x01, 0x04, 0x0A,
 		  0x00, 0x85, 0x11, 0x11, 0x55, 0x00, 0x04, 0x01,
 		  0x80, 0x55, 0x00, 0x04, 0x01, 0x80),
-	PHYREGS(0x8C08, 0x8808, 0x8408, 0xDF01, 0xE001, 0xE101),
+	PHYREGS(0x088C, 0x0888, 0x0884, 0x01DF, 0x01E0, 0x01E1),
   },
   {	.channel		= 94,
 	.freq			= 5470, /* MHz */
 	.unk2			= 3647,
-	RADIOREGS(0x71, 0x02, 0x23, 0x06, 0x53, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x23, 0x02, 0x06, 0x53, 0x01, 0x04, 0x0A,
 		  0x00, 0x85, 0x11, 0x11, 0x55, 0x00, 0x04, 0x01,
 		  0x80, 0x55, 0x00, 0x04, 0x01, 0x80),
-	PHYREGS(0x9008, 0x8C08, 0x8808, 0xDE01, 0xDF01, 0xE001),
+	PHYREGS(0x0890, 0x088C, 0x0888, 0x01DE, 0x01DF, 0x01E0),
   },
   {	.channel		= 96,
 	.freq			= 5480, /* MHz */
 	.unk2			= 3653,
-	RADIOREGS(0x71, 0x02, 0x24, 0x06, 0x4D, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x24, 0x02, 0x06, 0x4D, 0x01, 0x04, 0x0A,
 		  0x00, 0x84, 0x11, 0x11, 0x44, 0x00, 0x03, 0x00,
 		  0x80, 0x44, 0x00, 0x03, 0x00, 0x80),
-	PHYREGS(0x9408, 0x9008, 0x8C08, 0xDD01, 0xDE01, 0xDF01),
+	PHYREGS(0x0894, 0x0890, 0x088C, 0x01DD, 0x01DE, 0x01DF),
   },
   {	.channel		= 98,
 	.freq			= 5490, /* MHz */
 	.unk2			= 3660,
-	RADIOREGS(0x71, 0x02, 0x25, 0x06, 0x4D, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x25, 0x02, 0x06, 0x4D, 0x01, 0x04, 0x0A,
 		  0x00, 0x84, 0x11, 0x11, 0x44, 0x00, 0x03, 0x00,
 		  0x80, 0x44, 0x00, 0x03, 0x00, 0x80),
-	PHYREGS(0x9808, 0x9408, 0x9008, 0xDD01, 0xDD01, 0xDE01),
+	PHYREGS(0x0898, 0x0894, 0x0890, 0x01DD, 0x01DD, 0x01DE),
   },
   {	.channel		= 100,
 	.freq			= 5500, /* MHz */
 	.unk2			= 3667,
-	RADIOREGS(0x71, 0x02, 0x26, 0x06, 0x47, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x26, 0x02, 0x06, 0x47, 0x01, 0x04, 0x0A,
 		  0x00, 0x84, 0x00, 0x00, 0x44, 0x00, 0x03, 0x00,
 		  0x80, 0x44, 0x00, 0x03, 0x00, 0x80),
-	PHYREGS(0x9C08, 0x9808, 0x9408, 0xDC01, 0xDD01, 0xDD01),
+	PHYREGS(0x089C, 0x0898, 0x0894, 0x01DC, 0x01DD, 0x01DD),
   },
   {	.channel		= 102,
 	.freq			= 5510, /* MHz */
 	.unk2			= 3673,
-	RADIOREGS(0x71, 0x02, 0x27, 0x06, 0x47, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x27, 0x02, 0x06, 0x47, 0x01, 0x04, 0x0A,
 		  0x00, 0x84, 0x00, 0x00, 0x44, 0x00, 0x03, 0x00,
 		  0x80, 0x44, 0x00, 0x03, 0x00, 0x80),
-	PHYREGS(0xA008, 0x9C08, 0x9808, 0xDB01, 0xDC01, 0xDD01),
+	PHYREGS(0x08A0, 0x089C, 0x0898, 0x01DB, 0x01DC, 0x01DD),
   },
   {	.channel		= 104,
 	.freq			= 5520, /* MHz */
 	.unk2			= 3680,
-	RADIOREGS(0x71, 0x02, 0x28, 0x05, 0x40, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x28, 0x02, 0x05, 0x40, 0x01, 0x04, 0x0A,
 		  0x00, 0x83, 0x00, 0x00, 0x33, 0x00, 0x02, 0x00,
 		  0x80, 0x33, 0x00, 0x02, 0x00, 0x80),
-	PHYREGS(0xA408, 0xA008, 0x9C08, 0xDA01, 0xDB01, 0xDC01),
+	PHYREGS(0x08A4, 0x08A0, 0x089C, 0x01DA, 0x01DB, 0x01DC),
   },
   {	.channel		= 106,
 	.freq			= 5530, /* MHz */
 	.unk2			= 3687,
-	RADIOREGS(0x71, 0x02, 0x29, 0x05, 0x40, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x29, 0x02, 0x05, 0x40, 0x01, 0x04, 0x0A,
 		  0x00, 0x83, 0x00, 0x00, 0x33, 0x00, 0x02, 0x00,
 		  0x80, 0x33, 0x00, 0x02, 0x00, 0x80),
-	PHYREGS(0xA808, 0xA408, 0xA008, 0xD901, 0xDA01, 0xDB01),
+	PHYREGS(0x08A8, 0x08A4, 0x08A0, 0x01D9, 0x01DA, 0x01DB),
   },
   {	.channel		= 108,
 	.freq			= 5540, /* MHz */
 	.unk2			= 3693,
-	RADIOREGS(0x71, 0x02, 0x2A, 0x05, 0x3A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x2A, 0x02, 0x05, 0x3A, 0x01, 0x04, 0x0A,
 		  0x00, 0x83, 0x00, 0x00, 0x33, 0x00, 0x02, 0x00,
 		  0x80, 0x33, 0x00, 0x02, 0x00, 0x80),
-	PHYREGS(0xAC08, 0xA808, 0xA408, 0xD801, 0xD901, 0xDA01),
+	PHYREGS(0x08AC, 0x08A8, 0x08A4, 0x01D8, 0x01D9, 0x01DA),
   },
   {	.channel		= 110,
 	.freq			= 5550, /* MHz */
 	.unk2			= 3700,
-	RADIOREGS(0x71, 0x02, 0x2B, 0x05, 0x3A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x2B, 0x02, 0x05, 0x3A, 0x01, 0x04, 0x0A,
 		  0x00, 0x83, 0x00, 0x00, 0x33, 0x00, 0x02, 0x00,
 		  0x80, 0x33, 0x00, 0x02, 0x00, 0x80),
-	PHYREGS(0xB008, 0xAC08, 0xA808, 0xD701, 0xD801, 0xD901),
+	PHYREGS(0x08B0, 0x08AC, 0x08A8, 0x01D7, 0x01D8, 0x01D9),
   },
   {	.channel		= 112,
 	.freq			= 5560, /* MHz */
 	.unk2			= 3707,
-	RADIOREGS(0x71, 0x02, 0x2C, 0x05, 0x34, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x2C, 0x02, 0x05, 0x34, 0x01, 0x04, 0x0A,
 		  0x00, 0x82, 0x00, 0x00, 0x22, 0x00, 0x01, 0x00,
 		  0x80, 0x22, 0x00, 0x01, 0x00, 0x80),
-	PHYREGS(0xB408, 0xB008, 0xAC08, 0xD701, 0xD701, 0xD801),
+	PHYREGS(0x08B4, 0x08B0, 0x08AC, 0x01D7, 0x01D7, 0x01D8),
   },
   {	.channel		= 114,
 	.freq			= 5570, /* MHz */
 	.unk2			= 3713,
-	RADIOREGS(0x71, 0x02, 0x2D, 0x05, 0x34, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x2D, 0x02, 0x05, 0x34, 0x01, 0x04, 0x0A,
 		  0x00, 0x82, 0x00, 0x00, 0x22, 0x00, 0x01, 0x00,
 		  0x80, 0x22, 0x00, 0x01, 0x00, 0x80),
-	PHYREGS(0xB808, 0xB408, 0xB008, 0xD601, 0xD701, 0xD701),
+	PHYREGS(0x08B8, 0x08B4, 0x08B0, 0x01D6, 0x01D7, 0x01D7),
   },
   {	.channel		= 116,
 	.freq			= 5580, /* MHz */
 	.unk2			= 3720,
-	RADIOREGS(0x71, 0x02, 0x2E, 0x04, 0x2E, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x2E, 0x02, 0x04, 0x2E, 0x01, 0x04, 0x0A,
 		  0x00, 0x82, 0x00, 0x00, 0x22, 0x00, 0x01, 0x00,
 		  0x80, 0x22, 0x00, 0x01, 0x00, 0x80),
-	PHYREGS(0xBC08, 0xB808, 0xB408, 0xD501, 0xD601, 0xD701),
+	PHYREGS(0x08BC, 0x08B8, 0x08B4, 0x01D5, 0x01D6, 0x01D7),
   },
   {	.channel		= 118,
 	.freq			= 5590, /* MHz */
 	.unk2			= 3727,
-	RADIOREGS(0x71, 0x02, 0x2F, 0x04, 0x2E, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x2F, 0x02, 0x04, 0x2E, 0x01, 0x04, 0x0A,
 		  0x00, 0x82, 0x00, 0x00, 0x22, 0x00, 0x01, 0x00,
 		  0x80, 0x22, 0x00, 0x01, 0x00, 0x80),
-	PHYREGS(0xC008, 0xBC08, 0xB808, 0xD401, 0xD501, 0xD601),
+	PHYREGS(0x08C0, 0x08BC, 0x08B8, 0x01D4, 0x01D5, 0x01D6),
   },
   {	.channel		= 120,
 	.freq			= 5600, /* MHz */
 	.unk2			= 3733,
-	RADIOREGS(0x71, 0x02, 0x30, 0x04, 0x28, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x30, 0x02, 0x04, 0x28, 0x01, 0x04, 0x0A,
 		  0x00, 0x81, 0x00, 0x00, 0x11, 0x00, 0x01, 0x00,
 		  0x80, 0x11, 0x00, 0x01, 0x00, 0x80),
-	PHYREGS(0xC408, 0xC008, 0xBC08, 0xD301, 0xD401, 0xD501),
+	PHYREGS(0x08C4, 0x08C0, 0x08BC, 0x01D3, 0x01D4, 0x01D5),
   },
   {	.channel		= 122,
 	.freq			= 5610, /* MHz */
 	.unk2			= 3740,
-	RADIOREGS(0x71, 0x02, 0x31, 0x04, 0x28, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x31, 0x02, 0x04, 0x28, 0x01, 0x04, 0x0A,
 		  0x00, 0x81, 0x00, 0x00, 0x11, 0x00, 0x01, 0x00,
 		  0x80, 0x11, 0x00, 0x01, 0x00, 0x80),
-	PHYREGS(0xC808, 0xC408, 0xC008, 0xD201, 0xD301, 0xD401),
+	PHYREGS(0x08C8, 0x08C4, 0x08C0, 0x01D2, 0x01D3, 0x01D4),
   },
   {	.channel		= 124,
 	.freq			= 5620, /* MHz */
 	.unk2			= 3747,
-	RADIOREGS(0x71, 0x02, 0x32, 0x04, 0x21, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x32, 0x02, 0x04, 0x21, 0x01, 0x04, 0x0A,
 		  0x00, 0x81, 0x00, 0x00, 0x11, 0x00, 0x00, 0x00,
 		  0x80, 0x11, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xCC08, 0xC808, 0xC408, 0xD201, 0xD201, 0xD301),
+	PHYREGS(0x08CC, 0x08C8, 0x08C4, 0x01D2, 0x01D2, 0x01D3),
   },
   {	.channel		= 126,
 	.freq			= 5630, /* MHz */
 	.unk2			= 3753,
-	RADIOREGS(0x71, 0x02, 0x33, 0x04, 0x21, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x33, 0x02, 0x04, 0x21, 0x01, 0x04, 0x0A,
 		  0x00, 0x81, 0x00, 0x00, 0x11, 0x00, 0x00, 0x00,
 		  0x80, 0x11, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xD008, 0xCC08, 0xC808, 0xD101, 0xD201, 0xD201),
+	PHYREGS(0x08D0, 0x08CC, 0x08C8, 0x01D1, 0x01D2, 0x01D2),
   },
   {	.channel		= 128,
 	.freq			= 5640, /* MHz */
 	.unk2			= 3760,
-	RADIOREGS(0x71, 0x02, 0x34, 0x03, 0x1C, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x34, 0x02, 0x03, 0x1C, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xD408, 0xD008, 0xCC08, 0xD001, 0xD101, 0xD201),
+	PHYREGS(0x08D4, 0x08D0, 0x08CC, 0x01D0, 0x01D1, 0x01D2),
   },
   {	.channel		= 130,
 	.freq			= 5650, /* MHz */
 	.unk2			= 3767,
-	RADIOREGS(0x71, 0x02, 0x35, 0x03, 0x1C, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x35, 0x02, 0x03, 0x1C, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xD808, 0xD408, 0xD008, 0xCF01, 0xD001, 0xD101),
+	PHYREGS(0x08D8, 0x08D4, 0x08D0, 0x01CF, 0x01D0, 0x01D1),
   },
   {	.channel		= 132,
 	.freq			= 5660, /* MHz */
 	.unk2			= 3773,
-	RADIOREGS(0x71, 0x02, 0x36, 0x03, 0x16, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x36, 0x02, 0x03, 0x16, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xDC08, 0xD808, 0xD408, 0xCE01, 0xCF01, 0xD001),
+	PHYREGS(0x08DC, 0x08D8, 0x08D4, 0x01CE, 0x01CF, 0x01D0),
   },
   {	.channel		= 134,
 	.freq			= 5670, /* MHz */
 	.unk2			= 3780,
-	RADIOREGS(0x71, 0x02, 0x37, 0x03, 0x16, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x37, 0x02, 0x03, 0x16, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xE008, 0xDC08, 0xD808, 0xCE01, 0xCE01, 0xCF01),
+	PHYREGS(0x08E0, 0x08DC, 0x08D8, 0x01CE, 0x01CE, 0x01CF),
   },
   {	.channel		= 136,
 	.freq			= 5680, /* MHz */
 	.unk2			= 3787,
-	RADIOREGS(0x71, 0x02, 0x38, 0x03, 0x10, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x38, 0x02, 0x03, 0x10, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xE408, 0xE008, 0xDC08, 0xCD01, 0xCE01, 0xCE01),
+	PHYREGS(0x08E4, 0x08E0, 0x08DC, 0x01CD, 0x01CE, 0x01CE),
   },
   {	.channel		= 138,
 	.freq			= 5690, /* MHz */
 	.unk2			= 3793,
-	RADIOREGS(0x71, 0x02, 0x39, 0x03, 0x10, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x39, 0x02, 0x03, 0x10, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xE808, 0xE408, 0xE008, 0xCC01, 0xCD01, 0xCE01),
+	PHYREGS(0x08E8, 0x08E4, 0x08E0, 0x01CC, 0x01CD, 0x01CE),
   },
   {	.channel		= 140,
 	.freq			= 5700, /* MHz */
 	.unk2			= 3800,
-	RADIOREGS(0x71, 0x02, 0x3A, 0x02, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x3A, 0x02, 0x02, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xEC08, 0xE808, 0xE408, 0xCB01, 0xCC01, 0xCD01),
+	PHYREGS(0x08EC, 0x08E8, 0x08E4, 0x01CB, 0x01CC, 0x01CD),
   },
   {	.channel		= 142,
 	.freq			= 5710, /* MHz */
 	.unk2			= 3807,
-	RADIOREGS(0x71, 0x02, 0x3B, 0x02, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x3B, 0x02, 0x02, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xF008, 0xEC08, 0xE808, 0xCA01, 0xCB01, 0xCC01),
+	PHYREGS(0x08F0, 0x08EC, 0x08E8, 0x01CA, 0x01CB, 0x01CC),
   },
   {	.channel		= 144,
 	.freq			= 5720, /* MHz */
 	.unk2			= 3813,
-	RADIOREGS(0x71, 0x02, 0x3C, 0x02, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x3C, 0x02, 0x02, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xF408, 0xF008, 0xEC08, 0xC901, 0xCA01, 0xCB01),
+	PHYREGS(0x08F4, 0x08F0, 0x08EC, 0x01C9, 0x01CA, 0x01CB),
   },
   {	.channel		= 145,
 	.freq			= 5725, /* MHz */
 	.unk2			= 3817,
-	RADIOREGS(0x72, 0x04, 0x79, 0x02, 0x03, 0x01, 0x03, 0x14,
+	RADIOREGS(0x72, 0x79, 0x04, 0x02, 0x03, 0x01, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xF608, 0xF208, 0xEE08, 0xC901, 0xCA01, 0xCB01),
+	PHYREGS(0x08F6, 0x08F2, 0x08EE, 0x01C9, 0x01CA, 0x01CB),
   },
   {	.channel		= 146,
 	.freq			= 5730, /* MHz */
 	.unk2			= 3820,
-	RADIOREGS(0x71, 0x02, 0x3D, 0x02, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x3D, 0x02, 0x02, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xF808, 0xF408, 0xF008, 0xC901, 0xC901, 0xCA01),
+	PHYREGS(0x08F8, 0x08F4, 0x08F0, 0x01C9, 0x01C9, 0x01CA),
   },
   {	.channel		= 147,
 	.freq			= 5735, /* MHz */
 	.unk2			= 3823,
-	RADIOREGS(0x72, 0x04, 0x7B, 0x02, 0x03, 0x01, 0x03, 0x14,
+	RADIOREGS(0x72, 0x7B, 0x04, 0x02, 0x03, 0x01, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xFA08, 0xF608, 0xF208, 0xC801, 0xC901, 0xCA01),
+	PHYREGS(0x08FA, 0x08F6, 0x08F2, 0x01C8, 0x01C9, 0x01CA),
   },
   {	.channel		= 148,
 	.freq			= 5740, /* MHz */
 	.unk2			= 3827,
-	RADIOREGS(0x71, 0x02, 0x3E, 0x02, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x3E, 0x02, 0x02, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xFC08, 0xF808, 0xF408, 0xC801, 0xC901, 0xC901),
+	PHYREGS(0x08FC, 0x08F8, 0x08F4, 0x01C8, 0x01C9, 0x01C9),
   },
   {	.channel		= 149,
 	.freq			= 5745, /* MHz */
 	.unk2			= 3830,
-	RADIOREGS(0x72, 0x04, 0x7D, 0x02, 0xFE, 0x00, 0x03, 0x14,
+	RADIOREGS(0x72, 0x7D, 0x04, 0x02, 0xFE, 0x00, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0xFE08, 0xFA08, 0xF608, 0xC801, 0xC801, 0xC901),
+	PHYREGS(0x08FE, 0x08FA, 0x08F6, 0x01C8, 0x01C8, 0x01C9),
   },
   {	.channel		= 150,
 	.freq			= 5750, /* MHz */
 	.unk2			= 3833,
-	RADIOREGS(0x71, 0x02, 0x3F, 0x02, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x3F, 0x02, 0x02, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x0009, 0xFC08, 0xF808, 0xC701, 0xC801, 0xC901),
+	PHYREGS(0x0900, 0x08FC, 0x08F8, 0x01C7, 0x01C8, 0x01C9),
   },
   {	.channel		= 151,
 	.freq			= 5755, /* MHz */
 	.unk2			= 3837,
-	RADIOREGS(0x72, 0x04, 0x7F, 0x02, 0xFE, 0x00, 0x03, 0x14,
+	RADIOREGS(0x72, 0x7F, 0x04, 0x02, 0xFE, 0x00, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x0209, 0xFE08, 0xFA08, 0xC701, 0xC801, 0xC801),
+	PHYREGS(0x0902, 0x08FE, 0x08FA, 0x01C7, 0x01C8, 0x01C8),
   },
   {	.channel		= 152,
 	.freq			= 5760, /* MHz */
 	.unk2			= 3840,
-	RADIOREGS(0x71, 0x02, 0x40, 0x02, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x40, 0x02, 0x02, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x0409, 0x0009, 0xFC08, 0xC601, 0xC701, 0xC801),
+	PHYREGS(0x0904, 0x0900, 0x08FC, 0x01C6, 0x01C7, 0x01C8),
   },
   {	.channel		= 153,
 	.freq			= 5765, /* MHz */
 	.unk2			= 3843,
-	RADIOREGS(0x72, 0x04, 0x81, 0x02, 0xF8, 0x00, 0x03, 0x14,
+	RADIOREGS(0x72, 0x81, 0x04, 0x02, 0xF8, 0x00, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x0609, 0x0209, 0xFE08, 0xC601, 0xC701, 0xC801),
+	PHYREGS(0x0906, 0x0902, 0x08FE, 0x01C6, 0x01C7, 0x01C8),
   },
   {	.channel		= 154,
 	.freq			= 5770, /* MHz */
 	.unk2			= 3847,
-	RADIOREGS(0x71, 0x02, 0x41, 0x02, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x41, 0x02, 0x02, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x0809, 0x0409, 0x0009, 0xC601, 0xC601, 0xC701),
+	PHYREGS(0x0908, 0x0904, 0x0900, 0x01C6, 0x01C6, 0x01C7),
   },
   {	.channel		= 155,
 	.freq			= 5775, /* MHz */
 	.unk2			= 3850,
-	RADIOREGS(0x72, 0x04, 0x83, 0x02, 0xF8, 0x00, 0x03, 0x14,
+	RADIOREGS(0x72, 0x83, 0x04, 0x02, 0xF8, 0x00, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x0A09, 0x0609, 0x0209, 0xC501, 0xC601, 0xC701),
+	PHYREGS(0x090A, 0x0906, 0x0902, 0x01C5, 0x01C6, 0x01C7),
   },
   {	.channel		= 156,
 	.freq			= 5780, /* MHz */
 	.unk2			= 3853,
-	RADIOREGS(0x71, 0x02, 0x42, 0x02, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x42, 0x02, 0x02, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x0C09, 0x0809, 0x0409, 0xC501, 0xC601, 0xC601),
+	PHYREGS(0x090C, 0x0908, 0x0904, 0x01C5, 0x01C6, 0x01C6),
   },
   {	.channel		= 157,
 	.freq			= 5785, /* MHz */
 	.unk2			= 3857,
-	RADIOREGS(0x72, 0x04, 0x85, 0x02, 0xF2, 0x00, 0x03, 0x14,
+	RADIOREGS(0x72, 0x85, 0x04, 0x02, 0xF2, 0x00, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x0E09, 0x0A09, 0x0609, 0xC401, 0xC501, 0xC601),
+	PHYREGS(0x090E, 0x090A, 0x0906, 0x01C4, 0x01C5, 0x01C6),
   },
   {	.channel		= 158,
 	.freq			= 5790, /* MHz */
 	.unk2			= 3860,
-	RADIOREGS(0x71, 0x02, 0x43, 0x02, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x43, 0x02, 0x02, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x1009, 0x0C09, 0x0809, 0xC401, 0xC501, 0xC601),
+	PHYREGS(0x0910, 0x090C, 0x0908, 0x01C4, 0x01C5, 0x01C6),
   },
   {	.channel		= 159,
 	.freq			= 5795, /* MHz */
 	.unk2			= 3863,
-	RADIOREGS(0x72, 0x04, 0x87, 0x02, 0xF2, 0x00, 0x03, 0x14,
+	RADIOREGS(0x72, 0x87, 0x04, 0x02, 0xF2, 0x00, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x1209, 0x0E09, 0x0A09, 0xC401, 0xC401, 0xC501),
+	PHYREGS(0x0912, 0x090E, 0x090A, 0x01C4, 0x01C4, 0x01C5),
   },
   {	.channel		= 160,
 	.freq			= 5800, /* MHz */
 	.unk2			= 3867,
-	RADIOREGS(0x71, 0x02, 0x44, 0x01, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x44, 0x02, 0x01, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x1409, 0x1009, 0x0C09, 0xC301, 0xC401, 0xC501),
+	PHYREGS(0x0914, 0x0910, 0x090C, 0x01C3, 0x01C4, 0x01C5),
   },
   {	.channel		= 161,
 	.freq			= 5805, /* MHz */
 	.unk2			= 3870,
-	RADIOREGS(0x72, 0x04, 0x89, 0x01, 0xED, 0x00, 0x03, 0x14,
+	RADIOREGS(0x72, 0x89, 0x04, 0x01, 0xED, 0x00, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x1609, 0x1209, 0x0E09, 0xC301, 0xC401, 0xC401),
+	PHYREGS(0x0916, 0x0912, 0x090E, 0x01C3, 0x01C4, 0x01C4),
   },
   {	.channel		= 162,
 	.freq			= 5810, /* MHz */
 	.unk2			= 3873,
-	RADIOREGS(0x71, 0x02, 0x45, 0x01, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x45, 0x02, 0x01, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x1809, 0x1409, 0x1009, 0xC201, 0xC301, 0xC401),
+	PHYREGS(0x0918, 0x0914, 0x0910, 0x01C2, 0x01C3, 0x01C4),
   },
   {	.channel		= 163,
 	.freq			= 5815, /* MHz */
 	.unk2			= 3877,
-	RADIOREGS(0x72, 0x04, 0x8B, 0x01, 0xED, 0x00, 0x03, 0x14,
+	RADIOREGS(0x72, 0x8B, 0x04, 0x01, 0xED, 0x00, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x1A09, 0x1609, 0x1209, 0xC201, 0xC301, 0xC401),
+	PHYREGS(0x091A, 0x0916, 0x0912, 0x01C2, 0x01C3, 0x01C4),
   },
   {	.channel		= 164,
 	.freq			= 5820, /* MHz */
 	.unk2			= 3880,
-	RADIOREGS(0x71, 0x02, 0x46, 0x01, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x46, 0x02, 0x01, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x1C09, 0x1809, 0x1409, 0xC201, 0xC201, 0xC301),
+	PHYREGS(0x091C, 0x0918, 0x0914, 0x01C2, 0x01C2, 0x01C3),
   },
   {	.channel		= 165,
 	.freq			= 5825, /* MHz */
 	.unk2			= 3883,
-	RADIOREGS(0x72, 0x04, 0x8D, 0x01, 0xED, 0x00, 0x03, 0x14,
+	RADIOREGS(0x72, 0x8D, 0x04, 0x01, 0xED, 0x00, 0x03, 0x14,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x1E09, 0x1A09, 0x1609, 0xC101, 0xC201, 0xC301),
+	PHYREGS(0x091E, 0x091A, 0x0916, 0x01C1, 0x01C2, 0x01C3),
   },
   {	.channel		= 166,
 	.freq			= 5830, /* MHz */
 	.unk2			= 3887,
-	RADIOREGS(0x71, 0x02, 0x47, 0x01, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x47, 0x02, 0x01, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x2009, 0x1C09, 0x1809, 0xC101, 0xC201, 0xC201),
+	PHYREGS(0x0920, 0x091C, 0x0918, 0x01C1, 0x01C2, 0x01C2),
   },
   {	.channel		= 168,
 	.freq			= 5840, /* MHz */
 	.unk2			= 3893,
-	RADIOREGS(0x71, 0x02, 0x48, 0x01, 0x0A, 0x01, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x48, 0x02, 0x01, 0x0A, 0x01, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x2409, 0x2009, 0x1C09, 0xC001, 0xC101, 0xC201),
+	PHYREGS(0x0924, 0x0920, 0x091C, 0x01C0, 0x01C1, 0x01C2),
   },
   {	.channel		= 170,
 	.freq			= 5850, /* MHz */
 	.unk2			= 3900,
-	RADIOREGS(0x71, 0x02, 0x49, 0x01, 0xE0, 0x00, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x49, 0x02, 0x01, 0xE0, 0x00, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x2809, 0x2409, 0x2009, 0xBF01, 0xC001, 0xC101),
+	PHYREGS(0x0928, 0x0924, 0x0920, 0x01BF, 0x01C0, 0x01C1),
   },
   {	.channel		= 172,
 	.freq			= 5860, /* MHz */
 	.unk2			= 3907,
-	RADIOREGS(0x71, 0x02, 0x4A, 0x01, 0xDE, 0x00, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x4A, 0x02, 0x01, 0xDE, 0x00, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x2C09, 0x2809, 0x2409, 0xBF01, 0xBF01, 0xC001),
+	PHYREGS(0x092C, 0x0928, 0x0924, 0x01BF, 0x01BF, 0x01C0),
   },
   {	.channel		= 174,
 	.freq			= 5870, /* MHz */
 	.unk2			= 3913,
-	RADIOREGS(0x71, 0x02, 0x4B, 0x00, 0xDB, 0x00, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x4B, 0x02, 0x00, 0xDB, 0x00, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x3009, 0x2C09, 0x2809, 0xBE01, 0xBF01, 0xBF01),
+	PHYREGS(0x0930, 0x092C, 0x0928, 0x01BE, 0x01BF, 0x01BF),
   },
   {	.channel		= 176,
 	.freq			= 5880, /* MHz */
 	.unk2			= 3920,
-	RADIOREGS(0x71, 0x02, 0x4C, 0x00, 0xD8, 0x00, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x4C, 0x02, 0x00, 0xD8, 0x00, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x3409, 0x3009, 0x2C09, 0xBD01, 0xBE01, 0xBF01),
+	PHYREGS(0x0934, 0x0930, 0x092C, 0x01BD, 0x01BE, 0x01BF),
   },
   {	.channel		= 178,
 	.freq			= 5890, /* MHz */
 	.unk2			= 3927,
-	RADIOREGS(0x71, 0x02, 0x4D, 0x00, 0xD6, 0x00, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x4D, 0x02, 0x00, 0xD6, 0x00, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x3809, 0x3409, 0x3009, 0xBC01, 0xBD01, 0xBE01),
+	PHYREGS(0x0938, 0x0934, 0x0930, 0x01BC, 0x01BD, 0x01BE),
   },
   {	.channel		= 180,
 	.freq			= 5900, /* MHz */
 	.unk2			= 3933,
-	RADIOREGS(0x71, 0x02, 0x4E, 0x00, 0xD3, 0x00, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x4E, 0x02, 0x00, 0xD3, 0x00, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x3C09, 0x3809, 0x3409, 0xBC01, 0xBC01, 0xBD01),
+	PHYREGS(0x093C, 0x0938, 0x0934, 0x01BC, 0x01BC, 0x01BD),
   },
   {	.channel		= 182,
 	.freq			= 5910, /* MHz */
 	.unk2			= 3940,
-	RADIOREGS(0x71, 0x02, 0x4F, 0x00, 0xD6, 0x00, 0x04, 0x0A,
+	RADIOREGS(0x71, 0x4F, 0x02, 0x00, 0xD6, 0x00, 0x04, 0x0A,
 		  0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 		  0x80, 0x00, 0x00, 0x00, 0x00, 0x80),
-	PHYREGS(0x4009, 0x3C09, 0x3809, 0xBB01, 0xBC01, 0xBC01),
+	PHYREGS(0x0940, 0x093C, 0x0938, 0x01BB, 0x01BC, 0x01BC),
   },
   {	.channel		= 1,
 	.freq			= 2412, /* MHz */
 	.unk2			= 3216,
-	RADIOREGS(0x73, 0x09, 0x6C, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x6C, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x0D, 0x0C,
 		  0x80, 0xFF, 0x88, 0x0D, 0x0C, 0x80),
-	PHYREGS(0xC903, 0xC503, 0xC103, 0x3A04, 0x3F04, 0x4304),
+	PHYREGS(0x03C9, 0x03C5, 0x03C1, 0x043A, 0x043F, 0x0443),
   },
   {	.channel		= 2,
 	.freq			= 2417, /* MHz */
 	.unk2			= 3223,
-	RADIOREGS(0x73, 0x09, 0x71, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x71, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x0C, 0x0B,
 		  0x80, 0xFF, 0x88, 0x0C, 0x0B, 0x80),
-	PHYREGS(0xCB03, 0xC703, 0xC303, 0x3804, 0x3D04, 0x4104),
+	PHYREGS(0x03CB, 0x03C7, 0x03C3, 0x0438, 0x043D, 0x0441),
   },
   {	.channel		= 3,
 	.freq			= 2422, /* MHz */
 	.unk2			= 3229,
-	RADIOREGS(0x73, 0x09, 0x76, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x76, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x0C, 0x0A,
 		  0x80, 0xFF, 0x88, 0x0C, 0x0A, 0x80),
-	PHYREGS(0xCD03, 0xC903, 0xC503, 0x3604, 0x3A04, 0x3F04),
+	PHYREGS(0x03CD, 0x03C9, 0x03C5, 0x0436, 0x043A, 0x043F),
   },
   {	.channel		= 4,
 	.freq			= 2427, /* MHz */
 	.unk2			= 3236,
-	RADIOREGS(0x73, 0x09, 0x7B, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x7B, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x0C, 0x0A,
 		  0x80, 0xFF, 0x88, 0x0C, 0x0A, 0x80),
-	PHYREGS(0xCF03, 0xCB03, 0xC703, 0x3404, 0x3804, 0x3D04),
+	PHYREGS(0x03CF, 0x03CB, 0x03C7, 0x0434, 0x0438, 0x043D),
   },
   {	.channel		= 5,
 	.freq			= 2432, /* MHz */
 	.unk2			= 3243,
-	RADIOREGS(0x73, 0x09, 0x80, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x80, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x0C, 0x09,
 		  0x80, 0xFF, 0x88, 0x0C, 0x09, 0x80),
-	PHYREGS(0xD103, 0xCD03, 0xC903, 0x3104, 0x3604, 0x3A04),
+	PHYREGS(0x03D1, 0x03CD, 0x03C9, 0x0431, 0x0436, 0x043A),
   },
   {	.channel		= 6,
 	.freq			= 2437, /* MHz */
 	.unk2			= 3249,
-	RADIOREGS(0x73, 0x09, 0x85, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x85, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x0B, 0x08,
 		  0x80, 0xFF, 0x88, 0x0B, 0x08, 0x80),
-	PHYREGS(0xD303, 0xCF03, 0xCB03, 0x2F04, 0x3404, 0x3804),
+	PHYREGS(0x03D3, 0x03CF, 0x03CB, 0x042F, 0x0434, 0x0438),
   },
   {	.channel		= 7,
 	.freq			= 2442, /* MHz */
 	.unk2			= 3256,
-	RADIOREGS(0x73, 0x09, 0x8A, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x8A, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x0A, 0x07,
 		  0x80, 0xFF, 0x88, 0x0A, 0x07, 0x80),
-	PHYREGS(0xD503, 0xD103, 0xCD03, 0x2D04, 0x3104, 0x3604),
+	PHYREGS(0x03D5, 0x03D1, 0x03CD, 0x042D, 0x0431, 0x0436),
   },
   {	.channel		= 8,
 	.freq			= 2447, /* MHz */
 	.unk2			= 3263,
-	RADIOREGS(0x73, 0x09, 0x8F, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x8F, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x0A, 0x06,
 		  0x80, 0xFF, 0x88, 0x0A, 0x06, 0x80),
-	PHYREGS(0xD703, 0xD303, 0xCF03, 0x2B04, 0x2F04, 0x3404),
+	PHYREGS(0x03D7, 0x03D3, 0x03CF, 0x042B, 0x042F, 0x0434),
   },
   {	.channel		= 9,
 	.freq			= 2452, /* MHz */
 	.unk2			= 3269,
-	RADIOREGS(0x73, 0x09, 0x94, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x94, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x09, 0x06,
 		  0x80, 0xFF, 0x88, 0x09, 0x06, 0x80),
-	PHYREGS(0xD903, 0xD503, 0xD103, 0x2904, 0x2D04, 0x3104),
+	PHYREGS(0x03D9, 0x03D5, 0x03D1, 0x0429, 0x042D, 0x0431),
   },
   {	.channel		= 10,
 	.freq			= 2457, /* MHz */
 	.unk2			= 3276,
-	RADIOREGS(0x73, 0x09, 0x99, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x99, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x08, 0x05,
 		  0x80, 0xFF, 0x88, 0x08, 0x05, 0x80),
-	PHYREGS(0xDB03, 0xD703, 0xD303, 0x2704, 0x2B04, 0x2F04),
+	PHYREGS(0x03DB, 0x03D7, 0x03D3, 0x0427, 0x042B, 0x042F),
   },
   {	.channel		= 11,
 	.freq			= 2462, /* MHz */
 	.unk2			= 3283,
-	RADIOREGS(0x73, 0x09, 0x9E, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0x9E, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x08, 0x04,
 		  0x80, 0xFF, 0x88, 0x08, 0x04, 0x80),
-	PHYREGS(0xDD03, 0xD903, 0xD503, 0x2404, 0x2904, 0x2D04),
+	PHYREGS(0x03DD, 0x03D9, 0x03D5, 0x0424, 0x0429, 0x042D),
   },
   {	.channel		= 12,
 	.freq			= 2467, /* MHz */
 	.unk2			= 3289,
-	RADIOREGS(0x73, 0x09, 0xA3, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0xA3, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x08, 0x03,
 		  0x80, 0xFF, 0x88, 0x08, 0x03, 0x80),
-	PHYREGS(0xDF03, 0xDB03, 0xD703, 0x2204, 0x2704, 0x2B04),
+	PHYREGS(0x03DF, 0x03DB, 0x03D7, 0x0422, 0x0427, 0x042B),
   },
   {	.channel		= 13,
 	.freq			= 2472, /* MHz */
 	.unk2			= 3296,
-	RADIOREGS(0x73, 0x09, 0xA8, 0x0F, 0x00, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0xA8, 0x09, 0x0F, 0x00, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x07, 0x03,
 		  0x80, 0xFF, 0x88, 0x07, 0x03, 0x80),
-	PHYREGS(0xE103, 0xDD03, 0xD903, 0x2004, 0x2404, 0x2904),
+	PHYREGS(0x03E1, 0x03DD, 0x03D9, 0x0420, 0x0424, 0x0429),
   },
   {	.channel		= 14,
 	.freq			= 2484, /* MHz */
 	.unk2			= 3312,
-	RADIOREGS(0x73, 0x09, 0xB4, 0x0F, 0xFF, 0x01, 0x07, 0x15,
+	RADIOREGS(0x73, 0xB4, 0x09, 0x0F, 0xFF, 0x01, 0x07, 0x15,
 		  0x01, 0x8F, 0xFF, 0xFF, 0xFF, 0x88, 0x07, 0x01,
 		  0x80, 0xFF, 0x88, 0x07, 0x01, 0x80),
-	PHYREGS(0xE603, 0xE203, 0xDE03, 0x1B04, 0x1F04, 0x2404),
+	PHYREGS(0x03E6, 0x03E2, 0x03DE, 0x041B, 0x041F, 0x0424),
   },
 };
 
@@ -1299,7 +1299,7 @@ void b2055_upload_inittab(struct b43_wldev *dev,
 			  bool ghz5, bool ignore_uploadflag)
 {
 	const struct b2055_inittab_entry *e;
-	unsigned int i;
+	unsigned int i, writes = 0;
 	u16 value;
 
 	for (i = 0; i < ARRAY_SIZE(b2055_inittab); i++) {
@@ -1312,6 +1312,8 @@ void b2055_upload_inittab(struct b43_wldev *dev,
 			else
 				value = e->ghz2;
 			b43_radio_write16(dev, i, value);
+			if (++writes % 4 == 0)
+				b43_read32(dev, B43_MMIO_MACCTL); /* flush */
 		}
 	}
 }
diff --git a/drivers/net/wireless/b43/radio_2056.c b/drivers/net/wireless/b43/radio_2056.c
index d8563192ce5..8890df06702 100644
--- a/drivers/net/wireless/b43/radio_2056.c
+++ b/drivers/net/wireless/b43/radio_2056.c
@@ -24,17 +24,9073 @@
 #include "radio_2056.h"
 #include "phy_common.h"
 
+struct b2056_inittab_entry {
+	/* Value to write if we use the 5GHz band. */
+	u16 ghz5;
+	/* Value to write if we use the 2.4GHz band. */
+	u16 ghz2;
+	/* Flags */
+	u8 flags;
+};
+#define B2056_INITTAB_ENTRY_OK	0x01
+#define B2056_INITTAB_UPLOAD	0x02
+#define UPLOAD		.flags = B2056_INITTAB_ENTRY_OK | B2056_INITTAB_UPLOAD
+#define NOUPLOAD	.flags = B2056_INITTAB_ENTRY_OK
+
+struct b2056_inittabs_pts {
+	const struct b2056_inittab_entry *syn;
+	unsigned int syn_length;
+	const struct b2056_inittab_entry *tx;
+	unsigned int tx_length;
+	const struct b2056_inittab_entry *rx;
+	unsigned int rx_length;
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev3_syn[] = {
+	[B2056_SYN_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_PU]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_TXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXHPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_MASTER]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_RCAL]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_AFEREG]		= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSE]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSEIDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSERCAL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LPO]			= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_STATUS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_CODE_OUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL0]		= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL1]		= { .ghz5 = 0x001f, .ghz2 = 0x001f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL2]		= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL3]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL11]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST1]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST2]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST3]		= { .ghz5 = 0x0018, .ghz2 = 0x0018, NOUPLOAD, },
+	[B2056_SYN_PLL_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL1]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL3]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL5]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL6]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_REFDIV]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_PFD]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_CP1]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_CP2]		= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_SYN_PLL_CP3]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER1]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER2]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER3]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER4]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER5]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD1]		= { .ghz5 = 0x001c, .ghz2 = 0x001c, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD2]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO1]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO2]		= { .ghz5 = 0x00f7, .ghz2 = 0x00f7, UPLOAD, },
+	[B2056_SYN_PLL_MONITOR1]	= { .ghz5 = 0x00b4, .ghz2 = 0x00b4, NOUPLOAD, },
+	[B2056_SYN_PLL_MONITOR2]	= { .ghz5 = 0x00d2, .ghz2 = 0x00d2, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL4]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL5]		= { .ghz5 = 0x0096, .ghz2 = 0x0096, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL6]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL7]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL8]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL9]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL11]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL12]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, UPLOAD, },
+	[B2056_SYN_PLL_VCOCAL13]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_SYN_PLL_VREG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU2]		= { .ghz5 = 0x0040, .ghz2 = 0x0040, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU8]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RCCR1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF1]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER1]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER2]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF1]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGENBUF2]		= { .ghz5 = 0x008f, .ghz2 = 0x008f, UPLOAD, },
+	[B2056_SYN_LOGEN_BUF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF4]		= { .ghz5 = 0x00cc, .ghz2 = 0x00cc, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV1]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV2]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV3]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLOUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_CALEN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PEAKDET1]	= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2_OVRVAL]= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL_WAITCNT]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_VALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev3_tx[] = {
+	[B2056_TX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_GAIN_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_I]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_Q]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_I]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_Q]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER1]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RXIQCAL_TXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_VCM_HG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_IQCAL_IDAC]		= { .ghz5 = 0x0037, .ghz2 = 0x0037, NOUPLOAD, },
+	[B2056_TX_TSSI_VCM]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_AMP_DET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MUX]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSIA]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSIG]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PA_SPARE1]		= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_TX_PA_SPARE2]		= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_TX_INTPAA_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAA_IAUX_STAT]	= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_TX_INTPAA_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_STAT]	= { .ghz5 = 0x002d, .ghz2 = 0x002d, NOUPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAA_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAA_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_STAT]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_STAT]	= { .ghz5 = 0x001e, .ghz2 = 0x001e, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAG_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAG_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PADA_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_BOOST_TUNE]	= { .ghz5 = 0x0038, .ghz2 = 0x0038, NOUPLOAD, },
+	[B2056_TX_PADA_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PADG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PADG_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PADG_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PGAA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PGAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAA_BOOST_TUNE]	= { .ghz5 = 0x0083, .ghz2 = 0x0083, NOUPLOAD, },
+	[B2056_TX_PGAA_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAA_MISC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PGAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PGAG_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAG_MISC]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_MIXA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXA_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_MIXG]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXG_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_BB_GM_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_GM]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC]		= { .ghz5 = 0x0074, .ghz2 = 0x0074, UPLOAD, },
+	[B2056_TX_TXLPF_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF0]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_BW]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_TXLPF_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_0]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_1]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_2]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_3]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_4]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_5]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_6]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_OPAMP_IDAC]	= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_TX_TXLPF_MISC]		= { .ghz5 = 0x005b, .ghz2 = 0x005b, NOUPLOAD, },
+	[B2056_TX_TXSPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_INTPA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PAD_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PGA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_GM_TXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev3_rx[] = {
+	[B2056_RX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXIQCAL_RXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_RX_RSSI_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_SEL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_GAIN]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_RSSI_NB_IDAC]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_POLE]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_RSSI_WB1_IDAC]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_RSSI_MISC]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_LNAA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAA_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAA_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_A_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAA1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAA2_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_RX_LNA1A_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_LNAG_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAG_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAG_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_G_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAG1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAG2_IDAC]		= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_RX_LNA1G_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_MIXA_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXA_VCM]		= { .ghz5 = 0x0099, .ghz2 = 0x0099, NOUPLOAD, },
+	[B2056_RX_MIXA_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_LOB_BIAS]	= { .ghz5 = 0x0044, .ghz2 = 0x0044, UPLOAD, },
+	[B2056_RX_MIXA_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_CMFB_IDAC]	= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_MIXA_BIAS_AUX]	= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_MIXA_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXA_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXA_MAST_BIAS]	= { .ghz5 = 0x0050, .ghz2 = 0x0050, UPLOAD, },
+	[B2056_RX_MIXG_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXG_VCM]		= { .ghz5 = 0x0099, .ghz2 = 0x0099, NOUPLOAD, },
+	[B2056_RX_MIXG_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_LOB_BIAS]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_MIXG_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_CMFB_IDAC]	= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_AUX]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXG_MAST_BIAS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_IOPAMP]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_RX_TIA_QOPAMP]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_RX_TIA_IMISC]		= { .ghz5 = 0x0057, .ghz2 = 0x0057, NOUPLOAD, },
+	[B2056_RX_TIA_QMISC]		= { .ghz5 = 0x0057, .ghz2 = 0x0057, NOUPLOAD, },
+	[B2056_RX_TIA_GAIN]		= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_BB_LPF_MASTER]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_AACI_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_RXLPF_IDAC]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_LOWQ]	= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_HIGHQ]= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_BIAS_DCCANCEL]	= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_RX_RXLPF_OUTVCM]		= { .ghz5 = 0x0023, .ghz2 = 0x0023, NOUPLOAD, },
+	[B2056_RX_RXLPF_INVCM_BODY]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_CC_OP]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RXLPF_GAIN]		= { .ghz5 = 0x0023, .ghz2 = 0x0023, NOUPLOAD, },
+	[B2056_RX_RXLPF_Q_BW]		= { .ghz5 = 0x0041, .ghz2 = 0x0041, NOUPLOAD, },
+	[B2056_RX_RXLPF_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_HPC]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_LPC]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_UNUSED]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_VGA_MASTER]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS_DCCANCEL]	= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_RX_VGA_GAIN]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_VGA_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_VGABUF_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGABUF_GAIN_BW]	= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_A]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_G]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAG_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_MIXTIA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_VGA_BUF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_Q]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_BUF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_VGA_HPC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_HPC_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev4_syn[] = {
+	[B2056_SYN_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_PU]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_TXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXHPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_MASTER]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_RCAL]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_AFEREG]		= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSE]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSEIDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSERCAL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LPO]			= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_STATUS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_CODE_OUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL0]		= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL1]		= { .ghz5 = 0x001f, .ghz2 = 0x001f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL2]		= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL3]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL11]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST1]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST2]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST3]		= { .ghz5 = 0x0018, .ghz2 = 0x0018, NOUPLOAD, },
+	[B2056_SYN_PLL_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL1]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL3]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL5]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL6]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_REFDIV]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_PFD]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_CP1]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_CP2]		= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_SYN_PLL_CP3]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER1]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER2]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER3]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER4]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER5]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD1]		= { .ghz5 = 0x001c, .ghz2 = 0x001c, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD2]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO1]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO2]		= { .ghz5 = 0x00f7, .ghz2 = 0x00f7, UPLOAD, },
+	[B2056_SYN_PLL_MONITOR1]	= { .ghz5 = 0x00b4, .ghz2 = 0x00b4, NOUPLOAD, },
+	[B2056_SYN_PLL_MONITOR2]	= { .ghz5 = 0x00d2, .ghz2 = 0x00d2, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL4]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL5]		= { .ghz5 = 0x0096, .ghz2 = 0x0096, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL6]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL7]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL8]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL9]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL11]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL12]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, UPLOAD, },
+	[B2056_SYN_PLL_VCOCAL13]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_SYN_PLL_VREG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU2]		= { .ghz5 = 0x0040, .ghz2 = 0x0040, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU8]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RCCR1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF1]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER1]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER2]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF1]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGENBUF2]		= { .ghz5 = 0x008f, .ghz2 = 0x008f, UPLOAD, },
+	[B2056_SYN_LOGEN_BUF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF4]		= { .ghz5 = 0x00cc, .ghz2 = 0x00cc, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV1]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV2]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV3]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLOUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_CALEN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PEAKDET1]	= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2_OVRVAL]= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL_WAITCNT]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_VALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev4_tx[] = {
+	[B2056_TX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_GAIN_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_I]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_Q]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_I]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_Q]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER1]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RXIQCAL_TXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_VCM_HG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_IQCAL_IDAC]		= { .ghz5 = 0x0037, .ghz2 = 0x0037, NOUPLOAD, },
+	[B2056_TX_TSSI_VCM]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_AMP_DET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MUX]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSIA]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSIG]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PA_SPARE1]		= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_TX_PA_SPARE2]		= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_TX_INTPAA_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAA_IAUX_STAT]	= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_TX_INTPAA_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_STAT]	= { .ghz5 = 0x002d, .ghz2 = 0x002d, NOUPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAA_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAA_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_STAT]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_STAT]	= { .ghz5 = 0x001e, .ghz2 = 0x001e, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAG_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAG_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PADA_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_BOOST_TUNE]	= { .ghz5 = 0x0038, .ghz2 = 0x0038, NOUPLOAD, },
+	[B2056_TX_PADA_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PADG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PADG_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PADG_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PGAA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PGAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAA_BOOST_TUNE]	= { .ghz5 = 0x0083, .ghz2 = 0x0083, NOUPLOAD, },
+	[B2056_TX_PGAA_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAA_MISC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PGAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PGAG_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAG_MISC]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_MIXA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXA_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_MIXG]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXG_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_BB_GM_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_GM]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC]		= { .ghz5 = 0x0072, .ghz2 = 0x0072, UPLOAD, },
+	[B2056_TX_TXLPF_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF0]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_BW]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_TXLPF_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_0]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_1]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_2]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_3]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_4]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_5]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_6]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_OPAMP_IDAC]	= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_TX_TXLPF_MISC]		= { .ghz5 = 0x005b, .ghz2 = 0x005b, NOUPLOAD, },
+	[B2056_TX_TXSPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_INTPA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PAD_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PGA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_GM_TXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev4_rx[] = {
+	[B2056_RX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXIQCAL_RXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_RX_RSSI_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_SEL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_GAIN]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_RSSI_NB_IDAC]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_POLE]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_RSSI_WB1_IDAC]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_RSSI_MISC]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_LNAA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAA_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAA_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_A_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAA1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAA2_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_RX_LNA1A_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_LNAG_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAG_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAG_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_G_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAG1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAG2_IDAC]		= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_RX_LNA1G_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_MIXA_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXA_VCM]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, UPLOAD, },
+	[B2056_RX_MIXA_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_LOB_BIAS]	= { .ghz5 = 0x0044, .ghz2 = 0x0044, UPLOAD, },
+	[B2056_RX_MIXA_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_CMFB_IDAC]	= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_MIXA_BIAS_AUX]	= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_MIXA_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXA_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXA_MAST_BIAS]	= { .ghz5 = 0x0050, .ghz2 = 0x0050, UPLOAD, },
+	[B2056_RX_MIXG_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXG_VCM]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, UPLOAD, },
+	[B2056_RX_MIXG_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_LOB_BIAS]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_MIXG_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_CMFB_IDAC]	= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_AUX]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXG_MAST_BIAS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_IOPAMP]		= { .ghz5 = 0x0026, .ghz2 = 0x0026, UPLOAD, },
+	[B2056_RX_TIA_QOPAMP]		= { .ghz5 = 0x0026, .ghz2 = 0x0026, UPLOAD, },
+	[B2056_RX_TIA_IMISC]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_TIA_QMISC]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_TIA_GAIN]		= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_BB_LPF_MASTER]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_AACI_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_RXLPF_IDAC]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_LOWQ]	= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_HIGHQ]= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_BIAS_DCCANCEL]	= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_RX_RXLPF_OUTVCM]		= { .ghz5 = 0x002f, .ghz2 = 0x002f, UPLOAD, },
+	[B2056_RX_RXLPF_INVCM_BODY]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_CC_OP]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RXLPF_GAIN]		= { .ghz5 = 0x0023, .ghz2 = 0x0023, NOUPLOAD, },
+	[B2056_RX_RXLPF_Q_BW]		= { .ghz5 = 0x0041, .ghz2 = 0x0041, NOUPLOAD, },
+	[B2056_RX_RXLPF_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_HPC]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_LPC]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_UNUSED]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_VGA_MASTER]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS_DCCANCEL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_RX_VGA_GAIN]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_VGA_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_VGABUF_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGABUF_GAIN_BW]	= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_A]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_G]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAG_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_MIXTIA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_VGA_BUF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_Q]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_BUF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_VGA_HPC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_HPC_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev5_syn[] = {
+	[B2056_SYN_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_PU]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_TXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXHPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_MASTER]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_RCAL]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_AFEREG]		= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSE]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSEIDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSERCAL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LPO]			= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_STATUS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_CODE_OUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL1]		= { .ghz5 = 0x001f, .ghz2 = 0x001f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL2]		= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL3]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL11]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST1]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST2]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST3]		= { .ghz5 = 0x0018, .ghz2 = 0x0018, NOUPLOAD, },
+	[B2056_SYN_PLL_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL1]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL3]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL5]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL6]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_REFDIV]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_PFD]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_CP1]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_CP2]		= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_SYN_PLL_CP3]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER1]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER2]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER3]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER4]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER5]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD1]		= { .ghz5 = 0x001c, .ghz2 = 0x001c, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD2]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO1]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO2]		= { .ghz5 = 0x00f7, .ghz2 = 0x00f7, UPLOAD, },
+	[B2056_SYN_PLL_MONITOR1]	= { .ghz5 = 0x00b4, .ghz2 = 0x00b4, NOUPLOAD, },
+	[B2056_SYN_PLL_MONITOR2]	= { .ghz5 = 0x00d2, .ghz2 = 0x00d2, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL4]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL5]		= { .ghz5 = 0x0096, .ghz2 = 0x0096, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL6]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL7]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL8]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL9]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL11]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL12]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, UPLOAD, },
+	[B2056_SYN_PLL_VCOCAL13]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_SYN_PLL_VREG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU2]		= { .ghz5 = 0x0040, .ghz2 = 0x0040, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU8]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RCCR1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF1]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER1]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER2]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF1]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGENBUF2]		= { .ghz5 = 0x008f, .ghz2 = 0x008f, UPLOAD, },
+	[B2056_SYN_LOGEN_BUF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF4]		= { .ghz5 = 0x00cc, .ghz2 = 0x00cc, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV1]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV2]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV3]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLOUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_CALEN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PEAKDET1]	= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2_OVRVAL]= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL_WAITCNT]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_VALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev5_tx[] = {
+	[B2056_TX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_GAIN_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_I]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_Q]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_I]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_Q]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER1]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RXIQCAL_TXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_VCM_HG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_IQCAL_IDAC]		= { .ghz5 = 0x0037, .ghz2 = 0x0037, NOUPLOAD, },
+	[B2056_TX_TSSI_VCM]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_AMP_DET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MUX]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSIA]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSIG]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PA_SPARE1]		= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_TX_PA_SPARE2]		= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_TX_INTPAA_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAA_IAUX_STAT]	= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_TX_INTPAA_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_STAT]	= { .ghz5 = 0x002d, .ghz2 = 0x002d, NOUPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAA_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAA_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_STAT]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_STAT]	= { .ghz5 = 0x001e, .ghz2 = 0x001e, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAG_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAG_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PADA_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_BOOST_TUNE]	= { .ghz5 = 0x0038, .ghz2 = 0x0038, NOUPLOAD, },
+	[B2056_TX_PADA_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PADG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PADG_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PADG_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PGAA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PGAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAA_BOOST_TUNE]	= { .ghz5 = 0x0083, .ghz2 = 0x0083, NOUPLOAD, },
+	[B2056_TX_PGAA_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAA_MISC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PGAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PGAG_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAG_MISC]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_MIXA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXA_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_MIXG]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXG_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_BB_GM_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_GM]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_TX_TXLPF_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF0]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_BW]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_TXLPF_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_0]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_1]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_2]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_3]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_4]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_5]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_6]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_OPAMP_IDAC]	= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_TX_TXLPF_MISC]		= { .ghz5 = 0x005b, .ghz2 = 0x005b, NOUPLOAD, },
+	[B2056_TX_TXSPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_INTPA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PAD_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PGA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_GM_TXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC0]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC1]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC2]		= { .ghz5 = 0x0071, .ghz2 = 0x0071, UPLOAD, },
+	[B2056_TX_GMBB_IDAC3]		= { .ghz5 = 0x0071, .ghz2 = 0x0071, UPLOAD, },
+	[B2056_TX_GMBB_IDAC4]		= { .ghz5 = 0x0072, .ghz2 = 0x0072, UPLOAD, },
+	[B2056_TX_GMBB_IDAC5]		= { .ghz5 = 0x0073, .ghz2 = 0x0073, UPLOAD, },
+	[B2056_TX_GMBB_IDAC6]		= { .ghz5 = 0x0074, .ghz2 = 0x0074, UPLOAD, },
+	[B2056_TX_GMBB_IDAC7]		= { .ghz5 = 0x0075, .ghz2 = 0x0075, UPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev5_rx[] = {
+	[B2056_RX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXIQCAL_RXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_RX_RSSI_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_SEL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_GAIN]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_RSSI_NB_IDAC]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_POLE]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_RSSI_WB1_IDAC]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_RSSI_MISC]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_LNAA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAA_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAA_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_A_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAA1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAA2_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_RX_LNA1A_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_LNAG_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAG_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAG_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_G_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAG1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAG2_IDAC]		= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_RX_LNA1G_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_MIXA_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXA_VCM]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, UPLOAD, },
+	[B2056_RX_MIXA_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_LOB_BIAS]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, UPLOAD, },
+	[B2056_RX_MIXA_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_CMFB_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_RX_MIXA_BIAS_AUX]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, UPLOAD, },
+	[B2056_RX_MIXA_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXA_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXA_MAST_BIAS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXG_VCM]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, UPLOAD, },
+	[B2056_RX_MIXG_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_LOB_BIAS]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_MIXG_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_CMFB_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_RX_MIXG_BIAS_AUX]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXG_MAST_BIAS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_IOPAMP]		= { .ghz5 = 0x0026, .ghz2 = 0x0026, UPLOAD, },
+	[B2056_RX_TIA_QOPAMP]		= { .ghz5 = 0x0026, .ghz2 = 0x0026, UPLOAD, },
+	[B2056_RX_TIA_IMISC]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_TIA_QMISC]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_TIA_GAIN]		= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_BB_LPF_MASTER]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_AACI_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_RXLPF_IDAC]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_LOWQ]	= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_HIGHQ]= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_BIAS_DCCANCEL]	= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_RX_RXLPF_OUTVCM]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, UPLOAD, },
+	[B2056_RX_RXLPF_INVCM_BODY]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_CC_OP]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RXLPF_GAIN]		= { .ghz5 = 0x0023, .ghz2 = 0x0023, NOUPLOAD, },
+	[B2056_RX_RXLPF_Q_BW]		= { .ghz5 = 0x0041, .ghz2 = 0x0041, NOUPLOAD, },
+	[B2056_RX_RXLPF_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_HPC]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_LPC]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_UNUSED]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_VGA_MASTER]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS_DCCANCEL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_RX_VGA_GAIN]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_VGA_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_VGABUF_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGABUF_GAIN_BW]	= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_A]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_G]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAG_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_MIXTIA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_VGA_BUF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_Q]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_BUF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_VGA_HPC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_HPC_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev6_syn[] = {
+	[B2056_SYN_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_PU]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_TXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXHPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_MASTER]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_RCAL]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_AFEREG]		= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSE]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSEIDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSERCAL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LPO]			= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_STATUS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_CODE_OUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL1]		= { .ghz5 = 0x001f, .ghz2 = 0x001f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL2]		= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL3]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL11]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST1]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST2]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST3]		= { .ghz5 = 0x0018, .ghz2 = 0x0018, NOUPLOAD, },
+	[B2056_SYN_PLL_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL1]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL3]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL5]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL6]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_REFDIV]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_PFD]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_CP1]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_CP2]		= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_SYN_PLL_CP3]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER1]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER2]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER3]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER4]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER5]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD1]		= { .ghz5 = 0x001c, .ghz2 = 0x001c, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD2]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO1]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO2]		= { .ghz5 = 0x00f7, .ghz2 = 0x00f7, UPLOAD, },
+	[B2056_SYN_PLL_MONITOR1]	= { .ghz5 = 0x00b4, .ghz2 = 0x00b4, NOUPLOAD, },
+	[B2056_SYN_PLL_MONITOR2]	= { .ghz5 = 0x00d2, .ghz2 = 0x00d2, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL4]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL5]		= { .ghz5 = 0x0096, .ghz2 = 0x0096, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL6]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL7]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL8]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL9]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL11]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL12]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, UPLOAD, },
+	[B2056_SYN_PLL_VCOCAL13]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_SYN_PLL_VREG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU2]		= { .ghz5 = 0x0040, .ghz2 = 0x0040, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU8]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RCCR1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF1]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER1]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER2]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF1]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGENBUF2]		= { .ghz5 = 0x008f, .ghz2 = 0x008f, UPLOAD, },
+	[B2056_SYN_LOGEN_BUF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF4]		= { .ghz5 = 0x00cc, .ghz2 = 0x00cc, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV1]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV2]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV3]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLOUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_CALEN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PEAKDET1]	= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2_OVRVAL]= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL_WAITCNT]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_VALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev6_tx[] = {
+	[B2056_TX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_GAIN_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_I]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_Q]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_I]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_Q]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER1]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RXIQCAL_TXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_VCM_HG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_IQCAL_IDAC]		= { .ghz5 = 0x0037, .ghz2 = 0x0037, NOUPLOAD, },
+	[B2056_TX_TSSI_VCM]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_AMP_DET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MUX]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSIA]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSIG]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PA_SPARE1]		= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_TX_PA_SPARE2]		= { .ghz5 = 0x00ee, .ghz2 = 0x00ee, UPLOAD, },
+	[B2056_TX_INTPAA_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAA_IAUX_STAT]	= { .ghz5 = 0x0050, .ghz2 = 0x0050, UPLOAD, },
+	[B2056_TX_INTPAA_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_STAT]	= { .ghz5 = 0x0050, .ghz2 = 0x0050, UPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAA_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAA_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_STAT]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_STAT]	= { .ghz5 = 0x001e, .ghz2 = 0x001e, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAG_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAG_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PADA_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_BOOST_TUNE]	= { .ghz5 = 0x0038, .ghz2 = 0x0038, NOUPLOAD, },
+	[B2056_TX_PADA_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PADG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PADG_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PADG_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PGAA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PGAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAA_BOOST_TUNE]	= { .ghz5 = 0x0083, .ghz2 = 0x0083, NOUPLOAD, },
+	[B2056_TX_PGAA_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAA_MISC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PGAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PGAG_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAG_MISC]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_MIXA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXA_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_MIXG]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXG_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_BB_GM_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_GM]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_TX_TXLPF_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF0]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_BW]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_TXLPF_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_0]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_1]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_2]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_3]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_4]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_5]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_6]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_OPAMP_IDAC]	= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_TX_TXLPF_MISC]		= { .ghz5 = 0x005b, .ghz2 = 0x005b, NOUPLOAD, },
+	[B2056_TX_TXSPARE1]		= { .ghz5 = 0x0030, .ghz2 = 0x0030, UPLOAD, },
+	[B2056_TX_TXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_INTPA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PAD_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PGA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_GM_TXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC0]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC1]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC2]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC3]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC4]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC5]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC6]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC7]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev6_rx[] = {
+	[B2056_RX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXIQCAL_RXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_RX_RSSI_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_SEL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_GAIN]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_RSSI_NB_IDAC]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_POLE]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_RSSI_WB1_IDAC]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_RSSI_MISC]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_LNAA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAA_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAA_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_A_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAA1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAA2_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_RX_LNA1A_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_LNAG_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAG_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAG_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_G_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAG1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAG2_IDAC]		= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_RX_LNA1G_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_MIXA_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXA_VCM]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, UPLOAD, },
+	[B2056_RX_MIXA_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_LOB_BIAS]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, UPLOAD, },
+	[B2056_RX_MIXA_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_CMFB_IDAC]	= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_MIXA_BIAS_AUX]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, UPLOAD, },
+	[B2056_RX_MIXA_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXA_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXA_MAST_BIAS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXG_VCM]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, UPLOAD, },
+	[B2056_RX_MIXG_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_LOB_BIAS]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_MIXG_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_CMFB_IDAC]	= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_AUX]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXG_MAST_BIAS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_IOPAMP]		= { .ghz5 = 0x0026, .ghz2 = 0x0026, UPLOAD, },
+	[B2056_RX_TIA_QOPAMP]		= { .ghz5 = 0x0026, .ghz2 = 0x0026, UPLOAD, },
+	[B2056_RX_TIA_IMISC]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_TIA_QMISC]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_TIA_GAIN]		= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_BB_LPF_MASTER]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_AACI_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_RXLPF_IDAC]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_LOWQ]	= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_HIGHQ]= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_BIAS_DCCANCEL]	= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_RX_RXLPF_OUTVCM]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, UPLOAD, },
+	[B2056_RX_RXLPF_INVCM_BODY]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_CC_OP]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RXLPF_GAIN]		= { .ghz5 = 0x0023, .ghz2 = 0x0023, NOUPLOAD, },
+	[B2056_RX_RXLPF_Q_BW]		= { .ghz5 = 0x0041, .ghz2 = 0x0041, NOUPLOAD, },
+	[B2056_RX_RXLPF_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_HPC]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_LPC]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_UNUSED]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_VGA_MASTER]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS_DCCANCEL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_RX_VGA_GAIN]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_VGA_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_VGABUF_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGABUF_GAIN_BW]	= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_A]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_G]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE3]		= { .ghz5 = 0x0005, .ghz2 = 0x0005, UPLOAD, },
+	[B2056_RX_RXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAG_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_MIXTIA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_VGA_BUF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_Q]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_BUF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_VGA_HPC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_HPC_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev7_syn[] = {
+	[B2056_SYN_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_PU]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_TXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXHPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_MASTER]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_RCAL]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_AFEREG]		= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSE]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSEIDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSERCAL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LPO]			= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_STATUS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_CODE_OUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL1]		= { .ghz5 = 0x001f, .ghz2 = 0x001f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL2]		= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL3]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL11]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST1]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST2]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST3]		= { .ghz5 = 0x0018, .ghz2 = 0x0018, NOUPLOAD, },
+	[B2056_SYN_PLL_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL1]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL3]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL5]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL6]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_REFDIV]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_PFD]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_CP1]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_CP2]		= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_SYN_PLL_CP3]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER1]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER2]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER3]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER4]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER5]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD1]		= { .ghz5 = 0x001c, .ghz2 = 0x001c, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD2]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO1]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO2]		= { .ghz5 = 0x00f7, .ghz2 = 0x00f7, UPLOAD, },
+	[B2056_SYN_PLL_MONITOR1]	= { .ghz5 = 0x00b4, .ghz2 = 0x00b4, NOUPLOAD, },
+	[B2056_SYN_PLL_MONITOR2]	= { .ghz5 = 0x00d2, .ghz2 = 0x00d2, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL4]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL5]		= { .ghz5 = 0x0096, .ghz2 = 0x0096, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL6]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL7]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL8]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL9]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL11]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL12]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, UPLOAD, },
+	[B2056_SYN_PLL_VCOCAL13]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_SYN_PLL_VREG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU2]		= { .ghz5 = 0x0040, .ghz2 = 0x0040, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU8]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RCCR1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF1]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER1]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER2]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF1]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGENBUF2]		= { .ghz5 = 0x008f, .ghz2 = 0x008f, UPLOAD, },
+	[B2056_SYN_LOGEN_BUF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF4]		= { .ghz5 = 0x00cc, .ghz2 = 0x00cc, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV1]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV2]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV3]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLOUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_CALEN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PEAKDET1]	= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2_OVRVAL]= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL_WAITCNT]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_VALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev7_tx[] = {
+	[B2056_TX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_GAIN_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_I]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_Q]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_I]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_Q]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER1]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RXIQCAL_TXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_VCM_HG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_IQCAL_IDAC]		= { .ghz5 = 0x0037, .ghz2 = 0x0037, NOUPLOAD, },
+	[B2056_TX_TSSI_VCM]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_AMP_DET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MUX]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSIA]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSIG]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PA_SPARE1]		= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_TX_PA_SPARE2]		= { .ghz5 = 0x00ee, .ghz2 = 0x00ee, UPLOAD, },
+	[B2056_TX_INTPAA_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAA_IAUX_STAT]	= { .ghz5 = 0x0050, .ghz2 = 0x0050, UPLOAD, },
+	[B2056_TX_INTPAA_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_STAT]	= { .ghz5 = 0x0050, .ghz2 = 0x0050, UPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAA_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAA_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_STAT]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_STAT]	= { .ghz5 = 0x001e, .ghz2 = 0x001e, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAG_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAG_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PADA_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_BOOST_TUNE]	= { .ghz5 = 0x0038, .ghz2 = 0x0038, NOUPLOAD, },
+	[B2056_TX_PADA_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PADG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PADG_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PADG_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PGAA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PGAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAA_BOOST_TUNE]	= { .ghz5 = 0x0083, .ghz2 = 0x0083, NOUPLOAD, },
+	[B2056_TX_PGAA_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAA_MISC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PGAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PGAG_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAG_MISC]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_MIXA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXA_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_MIXG]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXG_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_BB_GM_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_GM]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_TX_TXLPF_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF0]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_BW]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_TXLPF_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_0]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_1]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_2]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_3]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_4]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_5]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_6]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_OPAMP_IDAC]	= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_TX_TXLPF_MISC]		= { .ghz5 = 0x005b, .ghz2 = 0x005b, NOUPLOAD, },
+	[B2056_TX_TXSPARE1]		= { .ghz5 = 0x0030, .ghz2 = 0x0030, UPLOAD, },
+	[B2056_TX_TXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_INTPA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PAD_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PGA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_GM_TXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC0]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC1]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC2]		= { .ghz5 = 0x0071, .ghz2 = 0x0071, UPLOAD, },
+	[B2056_TX_GMBB_IDAC3]		= { .ghz5 = 0x0071, .ghz2 = 0x0071, UPLOAD, },
+	[B2056_TX_GMBB_IDAC4]		= { .ghz5 = 0x0072, .ghz2 = 0x0072, UPLOAD, },
+	[B2056_TX_GMBB_IDAC5]		= { .ghz5 = 0x0073, .ghz2 = 0x0073, UPLOAD, },
+	[B2056_TX_GMBB_IDAC6]		= { .ghz5 = 0x0074, .ghz2 = 0x0074, UPLOAD, },
+	[B2056_TX_GMBB_IDAC7]		= { .ghz5 = 0x0075, .ghz2 = 0x0075, UPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev7_rx[] = {
+	[B2056_RX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXIQCAL_RXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_RX_RSSI_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_SEL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_GAIN]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_RSSI_NB_IDAC]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_POLE]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_RSSI_WB1_IDAC]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_RSSI_MISC]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_LNAA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAA_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAA_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_A_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAA1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAA2_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_RX_LNA1A_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_LNAG_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAG_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAG_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_G_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAG1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAG2_IDAC]		= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_RX_LNA1G_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_MIXA_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXA_VCM]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, UPLOAD, },
+	[B2056_RX_MIXA_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_LOB_BIAS]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, UPLOAD, },
+	[B2056_RX_MIXA_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_CMFB_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_RX_MIXA_BIAS_AUX]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, UPLOAD, },
+	[B2056_RX_MIXA_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXA_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXA_MAST_BIAS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXG_VCM]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, UPLOAD, },
+	[B2056_RX_MIXG_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_LOB_BIAS]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_MIXG_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_CMFB_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_RX_MIXG_BIAS_AUX]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXG_MAST_BIAS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_IOPAMP]		= { .ghz5 = 0x0026, .ghz2 = 0x0026, UPLOAD, },
+	[B2056_RX_TIA_QOPAMP]		= { .ghz5 = 0x0026, .ghz2 = 0x0026, UPLOAD, },
+	[B2056_RX_TIA_IMISC]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_TIA_QMISC]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_TIA_GAIN]		= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_BB_LPF_MASTER]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_AACI_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_RXLPF_IDAC]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_LOWQ]	= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_HIGHQ]= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_BIAS_DCCANCEL]	= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_RX_RXLPF_OUTVCM]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, UPLOAD, },
+	[B2056_RX_RXLPF_INVCM_BODY]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_CC_OP]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RXLPF_GAIN]		= { .ghz5 = 0x0023, .ghz2 = 0x0023, NOUPLOAD, },
+	[B2056_RX_RXLPF_Q_BW]		= { .ghz5 = 0x0041, .ghz2 = 0x0041, NOUPLOAD, },
+	[B2056_RX_RXLPF_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_HPC]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_LPC]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_UNUSED]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_VGA_MASTER]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS_DCCANCEL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_RX_VGA_GAIN]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_VGA_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_VGABUF_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGABUF_GAIN_BW]	= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_A]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_G]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAG_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_MIXTIA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_VGA_BUF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_Q]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_BUF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_VGA_HPC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_HPC_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev8_syn[] = {
+	[B2056_SYN_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_PU]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_TXLPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_COM_RC_RXHPF]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_GPIO_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_MASTER]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_TOPBIAS_RCAL]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_AFEREG]		= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSE]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSEIDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_TEMPPROCSENSERCAL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LPO]			= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_VDDCAL_STATUS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCAL_CODE_OUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL1]		= { .ghz5 = 0x001f, .ghz2 = 0x001f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL2]		= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL3]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_RCCAL_CTRL11]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_ZCAL_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST1]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST2]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_MAST3]		= { .ghz5 = 0x0018, .ghz2 = 0x0018, NOUPLOAD, },
+	[B2056_SYN_PLL_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL1]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL3]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL5]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_SYN_PLL_XTAL6]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_REFDIV]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_PFD]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_CP1]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, NOUPLOAD, },
+	[B2056_SYN_PLL_CP2]		= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_SYN_PLL_CP3]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER1]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER2]	= { .ghz5 = 0x000d, .ghz2 = 0x000d, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER3]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER4]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_PLL_LOOPFILTER5]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD1]		= { .ghz5 = 0x001c, .ghz2 = 0x001c, NOUPLOAD, },
+	[B2056_SYN_PLL_MMD2]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO1]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCO2]		= { .ghz5 = 0x00f7, .ghz2 = 0x00f7, UPLOAD, },
+	[B2056_SYN_PLL_MONITOR1]	= { .ghz5 = 0x00b4, .ghz2 = 0x00b4, NOUPLOAD, },
+	[B2056_SYN_PLL_MONITOR2]	= { .ghz5 = 0x00d2, .ghz2 = 0x00d2, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL4]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL5]		= { .ghz5 = 0x0096, .ghz2 = 0x0096, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL6]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL7]		= { .ghz5 = 0x003e, .ghz2 = 0x003e, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL8]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL9]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL10]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL11]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_SYN_PLL_VCOCAL12]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, UPLOAD, },
+	[B2056_SYN_PLL_VCOCAL13]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_SYN_PLL_VREG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_PLL_STATUS3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU2]		= { .ghz5 = 0x0040, .ghz2 = 0x0040, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PU8]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BIAS_RESET]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RCCR1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF1]	= { .ghz5 = 0x0060, .ghz2 = 0x0060, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER1]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER2]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF1]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGENBUF2]		= { .ghz5 = 0x008f, .ghz2 = 0x008f, UPLOAD, },
+	[B2056_SYN_LOGEN_BUF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF4]		= { .ghz5 = 0x00cc, .ghz2 = 0x00cc, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV1]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV2]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_DIV3]		= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLOUT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACLCAL3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_CALEN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_PEAKDET1]	= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_DIFF_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_ACL_OVR]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_VCOBUF2_OVRVAL]= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_SYN_LOGEN_MIXER3_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF5_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_BUF6_OVRVAL]	= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CBUFTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSRX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX1_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX2_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX3_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CMOSTX4_OVRVAL]= { .ghz5 = 0x0066, .ghz2 = 0x0066, NOUPLOAD, },
+	[B2056_SYN_LOGEN_ACL_WAITCNT]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_SYN_LOGEN_CORE_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_RX_CMOS_CALVALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_SYN_LOGEN_TX_CMOS_VALID]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev8_tx[] = {
+	[B2056_TX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_GAIN_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_I]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_FINE_Q]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_I]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_LOFT_COARSE_Q]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER1]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_TX_COM_MASTER2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_RXIQCAL_TXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_IQCAL_VCM_HG]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_IQCAL_IDAC]		= { .ghz5 = 0x0037, .ghz2 = 0x0037, NOUPLOAD, },
+	[B2056_TX_TSSI_VCM]		= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_TX_AMP_DET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TX_SSI_MUX]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSIA]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSIG]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TSSI_MISC3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PA_SPARE1]		= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_TX_PA_SPARE2]		= { .ghz5 = 0x00ee, .ghz2 = 0x00ee, UPLOAD, },
+	[B2056_TX_INTPAA_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAA_IAUX_STAT]	= { .ghz5 = 0x0050, .ghz2 = 0x0050, UPLOAD, },
+	[B2056_TX_INTPAA_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_STAT]	= { .ghz5 = 0x0050, .ghz2 = 0x0050, UPLOAD, },
+	[B2056_TX_INTPAA_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAA_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAA_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAA_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_MASTER]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_BOOST_TUNE]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_STAT]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_TX_INTPAG_IAUX_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_STAT]	= { .ghz5 = 0x001e, .ghz2 = 0x001e, NOUPLOAD, },
+	[B2056_TX_INTPAG_IMAIN_DYN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_INTPAG_CASCBIAS]	= { .ghz5 = 0x006e, .ghz2 = 0x006e, NOUPLOAD, },
+	[B2056_TX_INTPAG_PASLOPE]	= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_TX_INTPAG_PA_MISC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PADA_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADA_BOOST_TUNE]	= { .ghz5 = 0x0038, .ghz2 = 0x0038, NOUPLOAD, },
+	[B2056_TX_PADA_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PADG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PADG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PADG_CASCBIAS]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_TX_PADG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PADG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PADG_SLOPE]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, UPLOAD, },
+	[B2056_TX_PGAA_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAA_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_TX_PGAA_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAA_BOOST_TUNE]	= { .ghz5 = 0x0083, .ghz2 = 0x0083, NOUPLOAD, },
+	[B2056_TX_PGAA_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAA_MISC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_MASTER]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_PGAG_IDAC]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_TX_PGAG_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_PGAG_BOOST_TUNE]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_TX_PGAG_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, UPLOAD, },
+	[B2056_TX_PGAG_MISC]		= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_TX_MIXA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXA_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_MIXG]			= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_MIXG_BOOST_TUNE]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_TX_BB_GM_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_GM]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_TX_TXLPF_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF0]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF1]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_RCCAL_OFF6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_BW]		= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_TX_TXLPF_GAIN]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_0]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_1]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_2]		= { .ghz5 = 0x000e, .ghz2 = 0x000e, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_3]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_4]		= { .ghz5 = 0x0013, .ghz2 = 0x0013, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_5]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_IDAC_6]		= { .ghz5 = 0x001b, .ghz2 = 0x001b, NOUPLOAD, },
+	[B2056_TX_TXLPF_OPAMP_IDAC]	= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_TX_TXLPF_MISC]		= { .ghz5 = 0x005b, .ghz2 = 0x005b, NOUPLOAD, },
+	[B2056_TX_TXSPARE1]		= { .ghz5 = 0x0030, .ghz2 = 0x0030, UPLOAD, },
+	[B2056_TX_TXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_TXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_INTPA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PAD_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_PGA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_GM_TXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_STATUS_TXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC0]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC1]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC2]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC3]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC4]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC5]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC6]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+	[B2056_TX_GMBB_IDAC7]		= { .ghz5 = 0x0070, .ghz2 = 0x0070, NOUPLOAD, },
+};
+
+static const struct b2056_inittab_entry b2056_inittab_rev8_rx[] = {
+	[B2056_RX_RESERVED_ADDR2]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR3]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR4]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR5]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR6]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR7]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_CTRL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_OVR]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RESET]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RCAL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_TXLPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_COM_RC_RXHPF]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR16]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR17]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR18]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR19]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR20]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR21]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR22]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR23]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR24]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR25]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR26]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR27]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR28]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR29]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR30]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RESERVED_ADDR31]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXIQCAL_RXMUX]	= { .ghz5 = 0x0003, .ghz2 = 0x0003, NOUPLOAD, },
+	[B2056_RX_RSSI_PU]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_SEL]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RSSI_GAIN]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_RSSI_NB_IDAC]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2I_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_1]	= { .ghz5 = 0x0015, .ghz2 = 0x0015, NOUPLOAD, },
+	[B2056_RX_RSSI_WB2Q_IDAC_2]	= { .ghz5 = 0x0005, .ghz2 = 0x0005, NOUPLOAD, },
+	[B2056_RX_RSSI_POLE]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_RSSI_WB1_IDAC]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_RSSI_MISC]		= { .ghz5 = 0x0090, .ghz2 = 0x0090, NOUPLOAD, },
+	[B2056_RX_LNAA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAA_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAA_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_A_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAA1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAA2_IDAC]		= { .ghz5 = 0x00ff, .ghz2 = 0x00ff, UPLOAD, },
+	[B2056_RX_LNA1A_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_LNAG_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_LNAG_TUNE]		= { .ghz5 = 0x0088, .ghz2 = 0x0088, NOUPLOAD, },
+	[B2056_RX_LNAG_GAIN]		= { .ghz5 = 0x0032, .ghz2 = 0x0032, NOUPLOAD, },
+	[B2056_RX_LNA_G_SLOPE]		= { .ghz5 = 0x0077, .ghz2 = 0x0077, NOUPLOAD, },
+	[B2056_RX_BIASPOLE_LNAG1_IDAC]	= { .ghz5 = 0x0017, .ghz2 = 0x0017, UPLOAD, },
+	[B2056_RX_LNAG2_IDAC]		= { .ghz5 = 0x00f0, .ghz2 = 0x00f0, UPLOAD, },
+	[B2056_RX_LNA1G_MISC]		= { .ghz5 = 0x0020, .ghz2 = 0x0020, NOUPLOAD, },
+	[B2056_RX_MIXA_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXA_VCM]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, UPLOAD, },
+	[B2056_RX_MIXA_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_LOB_BIAS]	= { .ghz5 = 0x0088, .ghz2 = 0x0088, UPLOAD, },
+	[B2056_RX_MIXA_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXA_CMFB_IDAC]	= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_MIXA_BIAS_AUX]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, UPLOAD, },
+	[B2056_RX_MIXA_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXA_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXA_MAST_BIAS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_MIXG_VCM]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, UPLOAD, },
+	[B2056_RX_MIXG_CTRLPTAT]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_LOB_BIAS]	= { .ghz5 = 0x0011, .ghz2 = 0x0011, NOUPLOAD, },
+	[B2056_RX_MIXG_CORE_IDAC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_MIXG_CMFB_IDAC]	= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_AUX]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MAIN]	= { .ghz5 = 0x0006, .ghz2 = 0x0006, NOUPLOAD, },
+	[B2056_RX_MIXG_BIAS_MISC]	= { .ghz5 = 0x0004, .ghz2 = 0x0004, NOUPLOAD, },
+	[B2056_RX_MIXG_MAST_BIAS]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_MASTER]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_IOPAMP]		= { .ghz5 = 0x0026, .ghz2 = 0x0026, UPLOAD, },
+	[B2056_RX_TIA_QOPAMP]		= { .ghz5 = 0x0026, .ghz2 = 0x0026, UPLOAD, },
+	[B2056_RX_TIA_IMISC]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_TIA_QMISC]		= { .ghz5 = 0x000f, .ghz2 = 0x000f, UPLOAD, },
+	[B2056_RX_TIA_GAIN]		= { .ghz5 = 0x0044, .ghz2 = 0x0044, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TIA_SPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_BB_LPF_MASTER]	= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_AACI_MASTER]		= { .ghz5 = 0x0008, .ghz2 = 0x0008, NOUPLOAD, },
+	[B2056_RX_RXLPF_IDAC]		= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_LOWQ]	= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_OPAMPBIAS_HIGHQ]= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_RXLPF_BIAS_DCCANCEL]	= { .ghz5 = 0x0002, .ghz2 = 0x0002, NOUPLOAD, },
+	[B2056_RX_RXLPF_OUTVCM]		= { .ghz5 = 0x0004, .ghz2 = 0x0004, UPLOAD, },
+	[B2056_RX_RXLPF_INVCM_BODY]	= { .ghz5 = 0x0007, .ghz2 = 0x0007, NOUPLOAD, },
+	[B2056_RX_RXLPF_CC_OP]		= { .ghz5 = 0x0055, .ghz2 = 0x0055, NOUPLOAD, },
+	[B2056_RX_RXLPF_GAIN]		= { .ghz5 = 0x0023, .ghz2 = 0x0023, NOUPLOAD, },
+	[B2056_RX_RXLPF_Q_BW]		= { .ghz5 = 0x0041, .ghz2 = 0x0041, NOUPLOAD, },
+	[B2056_RX_RXLPF_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_HPC]	= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXHPF_OFF7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_RCCAL_LPC]	= { .ghz5 = 0x000c, .ghz2 = 0x000c, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_0]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_3]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXLPF_OFF_4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_UNUSED]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_VGA_MASTER]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGA_BIAS_DCCANCEL]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, UPLOAD, },
+	[B2056_RX_VGA_GAIN]		= { .ghz5 = 0x000a, .ghz2 = 0x000a, NOUPLOAD, },
+	[B2056_RX_VGA_HP_CORNER_BW]	= { .ghz5 = 0x0001, .ghz2 = 0x0001, NOUPLOAD, },
+	[B2056_RX_VGABUF_BIAS]		= { .ghz5 = 0x0022, .ghz2 = 0x0022, NOUPLOAD, },
+	[B2056_RX_VGABUF_GAIN_BW]	= { .ghz5 = 0x0030, .ghz2 = 0x0030, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_A]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_TXFBMIX_G]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE1]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE2]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE3]		= { .ghz5 = 0x0005, .ghz2 = 0x0005, UPLOAD, },
+	[B2056_RX_RXSPARE4]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE5]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE6]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE7]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE8]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE9]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE10]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE11]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE12]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE13]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE14]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE15]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_RXSPARE16]		= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_LNAG_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_MIXTIA_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_VGA_BUF_GAIN]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_Q]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_BUF_BW]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_VGA_HPC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_RXLPF_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+	[B2056_RX_STATUS_HPC_RC]	= { .ghz5 = 0x0000, .ghz2 = 0x0000, NOUPLOAD, },
+};
+
+#define INITTABSPTS(prefix) \
+	.syn		= prefix##_syn,			\
+	.syn_length	= ARRAY_SIZE(prefix##_syn),	\
+	.tx		= prefix##_tx,			\
+	.tx_length	= ARRAY_SIZE(prefix##_tx),	\
+	.rx		= prefix##_rx,			\
+	.rx_length	= ARRAY_SIZE(prefix##_rx)
+
+struct b2056_inittabs_pts b2056_inittabs[] = {
+	[3] = { INITTABSPTS(b2056_inittab_rev3) },
+	[4] = { INITTABSPTS(b2056_inittab_rev4) },
+	[5] = { INITTABSPTS(b2056_inittab_rev5) },
+	[6] = { INITTABSPTS(b2056_inittab_rev6) },
+	[7] = { INITTABSPTS(b2056_inittab_rev7) },
+	[8] = { INITTABSPTS(b2056_inittab_rev8) },
+	[9] = { INITTABSPTS(b2056_inittab_rev7) },
+};
+
+#define RADIOREGS3(r00, r01, r02, r03, r04, r05, r06, r07, r08, r09, \
+		   r10, r11, r12, r13, r14, r15, r16, r17, r18, r19, \
+		   r20, r21, r22, r23, r24, r25, r26, r27, r28, r29, \
+		   r30, r31, r32, r33, r34, r35, r36) \
+	.radio_syn_pll_vcocal1		= r00,	\
+	.radio_syn_pll_vcocal2		= r01,	\
+	.radio_syn_pll_refdiv		= r02,	\
+	.radio_syn_pll_mmd2		= r03,	\
+	.radio_syn_pll_mmd1		= r04,	\
+	.radio_syn_pll_loopfilter1	= r05,	\
+	.radio_syn_pll_loopfilter2	= r06,	\
+	.radio_syn_pll_loopfilter3	= r07,	\
+	.radio_syn_pll_loopfilter4	= r08,	\
+	.radio_syn_pll_loopfilter5	= r09,	\
+	.radio_syn_reserved_addr27	= r10,	\
+	.radio_syn_reserved_addr28	= r11,	\
+	.radio_syn_reserved_addr29	= r12,	\
+	.radio_syn_logen_vcobuf1	= r13,	\
+	.radio_syn_logen_mixer2		= r14,	\
+	.radio_syn_logen_buf3		= r15,	\
+	.radio_syn_logen_buf4		= r16,	\
+	.radio_rx0_lnaa_tune		= r17,	\
+	.radio_rx0_lnag_tune		= r18,	\
+	.radio_tx0_intpaa_boost_tune	= r19,	\
+	.radio_tx0_intpag_boost_tune	= r20,	\
+	.radio_tx0_pada_boost_tune	= r21,	\
+	.radio_tx0_padg_boost_tune	= r22,	\
+	.radio_tx0_pgaa_boost_tune	= r23,	\
+	.radio_tx0_pgag_boost_tune	= r24,	\
+	.radio_tx0_mixa_boost_tune	= r25,	\
+	.radio_tx0_mixg_boost_tune	= r26,	\
+	.radio_rx1_lnaa_tune		= r27,	\
+	.radio_rx1_lnag_tune		= r28,	\
+	.radio_tx1_intpaa_boost_tune	= r29,	\
+	.radio_tx1_intpag_boost_tune	= r30,	\
+	.radio_tx1_pada_boost_tune	= r31,	\
+	.radio_tx1_padg_boost_tune	= r32,	\
+	.radio_tx1_pgaa_boost_tune	= r33,	\
+	.radio_tx1_pgag_boost_tune	= r34,	\
+	.radio_tx1_mixa_boost_tune	= r35,	\
+	.radio_tx1_mixg_boost_tune	= r36
+
+#define PHYREGS(r0, r1, r2, r3, r4, r5)	\
+	.phy_regs.phy_bw1a	= r0,	\
+	.phy_regs.phy_bw2	= r1,	\
+	.phy_regs.phy_bw3	= r2,	\
+	.phy_regs.phy_bw4	= r3,	\
+	.phy_regs.phy_bw5	= r4,	\
+	.phy_regs.phy_bw6	= r5
+
+/* http://bcm-v4.sipsolutions.net/802.11/Radio/2056/ChannelTable */
 static const struct b43_nphy_channeltab_entry_rev3 b43_nphy_channeltab_rev3[] = {
+  {	.freq			= 4920,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xec, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07b4, 0x07b0, 0x07ac, 0x0214, 0x0215, 0x0216),
+  },
+  {	.freq			= 4930,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xed, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07b8, 0x07b4, 0x07b0, 0x0213, 0x0214, 0x0215),
+  },
+  {	.freq			= 4940,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xee, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07bc, 0x07b8, 0x07b4, 0x0212, 0x0213, 0x0214),
+  },
+  {	.freq			= 4950,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xef, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07c0, 0x07bc, 0x07b8, 0x0211, 0x0212, 0x0213),
+  },
+  {	.freq			= 4960,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf0, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07c4, 0x07c0, 0x07bc, 0x020f, 0x0211, 0x0212),
+  },
+  {	.freq			= 4970,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf1, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07c8, 0x07c4, 0x07c0, 0x020e, 0x020f, 0x0211),
+  },
+  {	.freq			= 4980,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf2, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07cc, 0x07c8, 0x07c4, 0x020d, 0x020e, 0x020f),
+  },
+  {	.freq			= 4990,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf3, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07d0, 0x07cc, 0x07c8, 0x020c, 0x020d, 0x020e),
+  },
+  {	.freq			= 5000,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf4, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07d4, 0x07d0, 0x07cc, 0x020b, 0x020c, 0x020d),
+  },
+  {	.freq			= 5010,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf5, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07d8, 0x07d4, 0x07d0, 0x020a, 0x020b, 0x020c),
+  },
+  {	.freq			= 5020,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf6, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07dc, 0x07d8, 0x07d4, 0x0209, 0x020a, 0x020b),
+  },
+  {	.freq			= 5030,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf7, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07e0, 0x07dc, 0x07d8, 0x0208, 0x0209, 0x020a),
+  },
+  {	.freq			= 5040,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf8, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07e4, 0x07e0, 0x07dc, 0x0207, 0x0208, 0x0209),
+  },
+  {	.freq			= 5050,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf9, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07e8, 0x07e4, 0x07e0, 0x0206, 0x0207, 0x0208),
+  },
+  {	.freq			= 5060,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfa, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07ec, 0x07e8, 0x07e4, 0x0205, 0x0206, 0x0207),
+  },
+  {	.freq			= 5070,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfb, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07f0, 0x07ec, 0x07e8, 0x0204, 0x0205, 0x0206),
+  },
+  {	.freq			= 5080,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfc, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07f4, 0x07f0, 0x07ec, 0x0203, 0x0204, 0x0205),
+  },
+  {	.freq			= 5090,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfd, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07f8, 0x07f4, 0x07f0, 0x0202, 0x0203, 0x0204),
+  },
+  {	.freq			= 5100,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xfe, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xff, 0x00),
+	PHYREGS(0x07fc, 0x07f8, 0x07f4, 0x0201, 0x0202, 0x0203),
+  },
+  {	.freq			= 5110,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xff, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xfc, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0800, 0x07fc, 0x07f8, 0x0200, 0x0201, 0x0202),
+  },
+  {	.freq			= 5120,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x00, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xfc, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0804, 0x0800, 0x07fc, 0x01ff, 0x0200, 0x0201),
+  },
+  {	.freq			= 5130,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x01, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xfc, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0808, 0x0804, 0x0800, 0x01fe, 0x01ff, 0x0200),
+  },
+  {	.freq			= 5140,
+	RADIOREGS3(0xc6, 0x01, 0x01, 0x02, 0x02, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xfc, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xfc, 0x00),
+	PHYREGS(0x080c, 0x0808, 0x0804, 0x01fd, 0x01fe, 0x01ff),
+  },
+  {	.freq			= 5160,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x04, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xfc, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0814, 0x0810, 0x080c, 0x01fb, 0x01fc, 0x01fd),
+  },
+  {	.freq			= 5170,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x05, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xfc, 0x00, 0xff, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0818, 0x0814, 0x0810, 0x01fa, 0x01fb, 0x01fc),
+  },
+  {	.freq			= 5180,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x06, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xef, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xfc, 0x00, 0xef, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xfc, 0x00),
+	PHYREGS(0x081c, 0x0818, 0x0814, 0x01f9, 0x01fa, 0x01fb),
+  },
+  {	.freq			= 5190,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x07, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xef, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xfc, 0x00, 0xef, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0820, 0x081c, 0x0818, 0x01f8, 0x01f9, 0x01fa),
+  },
+  {	.freq			= 5200,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x08, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xef, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xfc, 0x00, 0xef, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0824, 0x0820, 0x081c, 0x01f7, 0x01f8, 0x01f9),
+  },
+  {	.freq			= 5210,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x09, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xdf, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xfc, 0x00, 0xdf, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0828, 0x0824, 0x0820, 0x01f6, 0x01f7, 0x01f8),
+  },
+  {	.freq			= 5220,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xdf, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xfc, 0x00, 0xdf, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xfc, 0x00),
+	PHYREGS(0x082c, 0x0828, 0x0824, 0x01f5, 0x01f6, 0x01f7),
+  },
+  {	.freq			= 5230,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xdf, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xfc, 0x00, 0xdf, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0830, 0x082c, 0x0828, 0x01f4, 0x01f5, 0x01f6),
+  },
+  {	.freq			= 5240,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xcf, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xfc, 0x00, 0xcf, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0834, 0x0830, 0x082c, 0x01f3, 0x01f4, 0x01f5),
+  },
+  {	.freq			= 5250,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xcf, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xfc, 0x00, 0xcf, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0838, 0x0834, 0x0830, 0x01f2, 0x01f3, 0x01f4),
+  },
+  {	.freq			= 5260,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xcf, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xfc, 0x00, 0xcf, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xfc, 0x00),
+	PHYREGS(0x083c, 0x0838, 0x0834, 0x01f1, 0x01f2, 0x01f3),
+  },
+  {	.freq			= 5270,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0f, 0x00,
+		   0xff, 0xcf, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xfc, 0x00, 0xcf, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0840, 0x083c, 0x0838, 0x01f0, 0x01f1, 0x01f2),
+  },
+  {	.freq			= 5280,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x10, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0f, 0x00,
+		   0xff, 0xbf, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xfc, 0x00, 0xbf, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0844, 0x0840, 0x083c, 0x01f0, 0x01f0, 0x01f1),
+  },
+  {	.freq			= 5290,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x11, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0f, 0x00,
+		   0xff, 0xbf, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xfc, 0x00, 0xbf, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0848, 0x0844, 0x0840, 0x01ef, 0x01f0, 0x01f0),
+  },
+  {	.freq			= 5300,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x12, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xbf, 0x00, 0x05, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xfc, 0x00, 0xbf, 0x00, 0x05, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xfc, 0x00),
+	PHYREGS(0x084c, 0x0848, 0x0844, 0x01ee, 0x01ef, 0x01f0),
+  },
+  {	.freq			= 5310,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x13, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xbf, 0x00, 0x05, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xfa, 0x00, 0xbf, 0x00, 0x05, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0850, 0x084c, 0x0848, 0x01ed, 0x01ee, 0x01ef),
+  },
+  {	.freq			= 5320,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x14, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xbf, 0x00, 0x05, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xfa, 0x00, 0xbf, 0x00, 0x05, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0854, 0x0850, 0x084c, 0x01ec, 0x01ed, 0x01ee),
+  },
+  {	.freq			= 5330,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x15, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xaf, 0x00, 0x05, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xfa, 0x00, 0xaf, 0x00, 0x05, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0858, 0x0854, 0x0850, 0x01eb, 0x01ec, 0x01ed),
+  },
+  {	.freq			= 5340,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x16, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xaf, 0x00, 0x05, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xfa, 0x00, 0xaf, 0x00, 0x05, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xfa, 0x00),
+	PHYREGS(0x085c, 0x0858, 0x0854, 0x01ea, 0x01eb, 0x01ec),
+  },
+  {	.freq			= 5350,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x17, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x9f, 0x00, 0x05, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xfa, 0x00, 0x9f, 0x00, 0x05, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0860, 0x085c, 0x0858, 0x01e9, 0x01ea, 0x01eb),
+  },
+  {	.freq			= 5360,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x18, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x9f, 0x00, 0x05, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xfa, 0x00, 0x9f, 0x00, 0x05, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0864, 0x0860, 0x085c, 0x01e8, 0x01e9, 0x01ea),
+  },
+  {	.freq			= 5370,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x19, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x9f, 0x00, 0x05, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xfa, 0x00, 0x9f, 0x00, 0x05, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0868, 0x0864, 0x0860, 0x01e7, 0x01e8, 0x01e9),
+  },
+  {	.freq			= 5380,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x9f, 0x00, 0x05, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xfa, 0x00, 0x9f, 0x00, 0x05, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xfa, 0x00),
+	PHYREGS(0x086c, 0x0868, 0x0864, 0x01e6, 0x01e7, 0x01e8),
+  },
+  {	.freq			= 5390,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x8f, 0x00, 0x05, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xfa, 0x00, 0x8f, 0x00, 0x05, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0870, 0x086c, 0x0868, 0x01e5, 0x01e6, 0x01e7),
+  },
+  {	.freq			= 5400,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x8f, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x08,
+		   0x00, 0xfa, 0x00, 0x8f, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x08, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0874, 0x0870, 0x086c, 0x01e5, 0x01e5, 0x01e6),
+  },
+  {	.freq			= 5410,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x8f, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x08,
+		   0x00, 0xfa, 0x00, 0x8f, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x08, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0878, 0x0874, 0x0870, 0x01e4, 0x01e5, 0x01e5),
+  },
+  {	.freq			= 5420,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x8e, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x08,
+		   0x00, 0xfa, 0x00, 0x8e, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x08, 0x00, 0xfa, 0x00),
+	PHYREGS(0x087c, 0x0878, 0x0874, 0x01e3, 0x01e4, 0x01e5),
+  },
+  {	.freq			= 5430,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x8e, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x08,
+		   0x00, 0xfa, 0x00, 0x8e, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x08, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0880, 0x087c, 0x0878, 0x01e2, 0x01e3, 0x01e4),
+  },
+  {	.freq			= 5440,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x20, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x7e, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x08,
+		   0x00, 0xfa, 0x00, 0x7e, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x08, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0884, 0x0880, 0x087c, 0x01e1, 0x01e2, 0x01e3),
+  },
+  {	.freq			= 5450,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x21, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x7d, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x08,
+		   0x00, 0xfa, 0x00, 0x7d, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x08, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0888, 0x0884, 0x0880, 0x01e0, 0x01e1, 0x01e2),
+  },
+  {	.freq			= 5460,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x22, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x6d, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x08,
+		   0x00, 0xf8, 0x00, 0x6d, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x08, 0x00, 0xf8, 0x00),
+	PHYREGS(0x088c, 0x0888, 0x0884, 0x01df, 0x01e0, 0x01e1),
+  },
+  {	.freq			= 5470,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x23, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x6d, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x08,
+		   0x00, 0xf8, 0x00, 0x6d, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x08, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0890, 0x088c, 0x0888, 0x01de, 0x01df, 0x01e0),
+  },
+  {	.freq			= 5480,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x24, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x5d, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x08,
+		   0x00, 0xf8, 0x00, 0x5d, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x08, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0894, 0x0890, 0x088c, 0x01dd, 0x01de, 0x01df),
+  },
+  {	.freq			= 5490,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x25, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x5c, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x08,
+		   0x00, 0xf8, 0x00, 0x5c, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x08, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0898, 0x0894, 0x0890, 0x01dd, 0x01dd, 0x01de),
+  },
+  {	.freq			= 5500,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x26, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x5c, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x5c, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x089c, 0x0898, 0x0894, 0x01dc, 0x01dd, 0x01dd),
+  },
+  {	.freq			= 5510,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x27, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x4c, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x4c, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08a0, 0x089c, 0x0898, 0x01db, 0x01dc, 0x01dd),
+  },
+  {	.freq			= 5520,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x28, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x4c, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x4c, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08a4, 0x08a0, 0x089c, 0x01da, 0x01db, 0x01dc),
+  },
+  {	.freq			= 5530,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x29, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x3b, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x3b, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08a8, 0x08a4, 0x08a0, 0x01d9, 0x01da, 0x01db),
+  },
+  {	.freq			= 5540,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x3b, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x3b, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08ac, 0x08a8, 0x08a4, 0x01d8, 0x01d9, 0x01da),
+  },
+  {	.freq			= 5550,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x3b, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x3b, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08b0, 0x08ac, 0x08a8, 0x01d7, 0x01d8, 0x01d9),
+  },
+  {	.freq			= 5560,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x2b, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x2b, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08b4, 0x08b0, 0x08ac, 0x01d7, 0x01d7, 0x01d8),
+  },
+  {	.freq			= 5570,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x2a, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x2a, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08b8, 0x08b4, 0x08b0, 0x01d6, 0x01d7, 0x01d7),
+  },
+  {	.freq			= 5580,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x1a, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x1a, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08bc, 0x08b8, 0x08b4, 0x01d5, 0x01d6, 0x01d7),
+  },
+  {	.freq			= 5590,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x1a, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x1a, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08c0, 0x08bc, 0x08b8, 0x01d4, 0x01d5, 0x01d6),
+  },
+  {	.freq			= 5600,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x30, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x1a, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x1a, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08c4, 0x08c0, 0x08bc, 0x01d3, 0x01d4, 0x01d5),
+  },
+  {	.freq			= 5610,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x31, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x19, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x19, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08c8, 0x08c4, 0x08c0, 0x01d2, 0x01d3, 0x01d4),
+  },
+  {	.freq			= 5620,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x32, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x19, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x19, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08cc, 0x08c8, 0x08c4, 0x01d2, 0x01d2, 0x01d3),
+  },
+  {	.freq			= 5630,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x33, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x09, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x09, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08d0, 0x08cc, 0x08c8, 0x01d1, 0x01d2, 0x01d2),
+  },
+  {	.freq			= 5640,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x34, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x09, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x09, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08d4, 0x08d0, 0x08cc, 0x01d0, 0x01d1, 0x01d2),
+  },
+  {	.freq			= 5650,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x35, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x08, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf8, 0x00, 0x08, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf8, 0x00),
+	PHYREGS(0x08d8, 0x08d4, 0x08d0, 0x01cf, 0x01d0, 0x01d1),
+  },
+  {	.freq			= 5660,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x36, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x08, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf6, 0x00, 0x08, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08dc, 0x08d8, 0x08d4, 0x01ce, 0x01cf, 0x01d0),
+  },
+  {	.freq			= 5670,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x37, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x08, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf6, 0x00, 0x08, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08e0, 0x08dc, 0x08d8, 0x01ce, 0x01ce, 0x01cf),
+  },
+  {	.freq			= 5680,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x38, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x08, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf6, 0x00, 0x08, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08e4, 0x08e0, 0x08dc, 0x01cd, 0x01ce, 0x01ce),
+  },
+  {	.freq			= 5690,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x39, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x07, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf6, 0x00, 0x07, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08e8, 0x08e4, 0x08e0, 0x01cc, 0x01cd, 0x01ce),
+  },
+  {	.freq			= 5700,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x07, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf6, 0x00, 0x07, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08ec, 0x08e8, 0x08e4, 0x01cb, 0x01cc, 0x01cd),
+  },
+  {	.freq			= 5710,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x07, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x07, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08f0, 0x08ec, 0x08e8, 0x01ca, 0x01cb, 0x01cc),
+  },
+  {	.freq			= 5720,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x07, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x07, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08f4, 0x08f0, 0x08ec, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5725,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x79, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x06, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08f6, 0x08f2, 0x08ee, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5730,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x06, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08f8, 0x08f4, 0x08f0, 0x01c9, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5735,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x7b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x06, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08fa, 0x08f6, 0x08f2, 0x01c8, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5740,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x06, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08fc, 0x08f8, 0x08f4, 0x01c8, 0x01c9, 0x01c9),
+  },
+  {	.freq			= 5745,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x06, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08fe, 0x08fa, 0x08f6, 0x01c8, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5750,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x06, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0900, 0x08fc, 0x08f8, 0x01c7, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5755,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7f, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x05, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0902, 0x08fe, 0x08fa, 0x01c7, 0x01c8, 0x01c8),
+  },
+  {	.freq			= 5760,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x40, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x05, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0904, 0x0900, 0x08fc, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5765,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x81, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x05, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0906, 0x0902, 0x08fe, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5770,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x41, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x05, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0908, 0x0904, 0x0900, 0x01c6, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5775,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x83, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x05, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x090a, 0x0906, 0x0902, 0x01c5, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5780,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x42, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x05, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x090c, 0x0908, 0x0904, 0x01c5, 0x01c6, 0x01c6),
+  },
+  {	.freq			= 5785,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x85, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x8a, 0x06, 0x00,
+		   0x40, 0x04, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x04, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x090e, 0x090a, 0x0906, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5790,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x43, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x8a, 0x06, 0x00,
+		   0x40, 0x04, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x04, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0910, 0x090c, 0x0908, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5795,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x87, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x8a, 0x06, 0x00,
+		   0x40, 0x04, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x04, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0912, 0x090e, 0x090a, 0x01c4, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5800,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x44, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x04, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x04, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0914, 0x0910, 0x090c, 0x01c3, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5805,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x89, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x04, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x04, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0916, 0x0912, 0x090e, 0x01c3, 0x01c4, 0x01c4),
+  },
+  {	.freq			= 5810,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x45, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x04, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x04, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0918, 0x0914, 0x0910, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5815,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x04, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x04, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x091a, 0x0916, 0x0912, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5820,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x46, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x03, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x091c, 0x0918, 0x0914, 0x01c2, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5825,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x03, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x091e, 0x091a, 0x0916, 0x01c1, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5830,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x47, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x03, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0920, 0x091c, 0x0918, 0x01c1, 0x01c2, 0x01c2),
+  },
+  {	.freq			= 5840,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x48, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x03, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0924, 0x0920, 0x091c, 0x01c0, 0x01c1, 0x01c2),
+  },
+  {	.freq			= 5850,
+	RADIOREGS3(0xe0, 0x00, 0x01, 0x02, 0x49, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf4, 0x00, 0x03, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf4, 0x00),
+	PHYREGS(0x0928, 0x0924, 0x0920, 0x01bf, 0x01c0, 0x01c1),
+  },
+  {	.freq			= 5860,
+	RADIOREGS3(0xde, 0x00, 0x01, 0x02, 0x4a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf2, 0x00, 0x03, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf2, 0x00),
+	PHYREGS(0x092c, 0x0928, 0x0924, 0x01bf, 0x01bf, 0x01c0),
+  },
+  {	.freq			= 5870,
+	RADIOREGS3(0xdb, 0x00, 0x01, 0x02, 0x4b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x02, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf2, 0x00, 0x02, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0930, 0x092c, 0x0928, 0x01be, 0x01bf, 0x01bf),
+  },
+  {	.freq			= 5880,
+	RADIOREGS3(0xd8, 0x00, 0x01, 0x02, 0x4c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x02, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf2, 0x00, 0x02, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0934, 0x0930, 0x092c, 0x01bd, 0x01be, 0x01bf),
+  },
+  {	.freq			= 5890,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x02, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x06,
+		   0x00, 0xf2, 0x00, 0x02, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x06, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0938, 0x0934, 0x0930, 0x01bc, 0x01bd, 0x01be),
+  },
+  {	.freq			= 5900,
+	RADIOREGS3(0xd3, 0x00, 0x01, 0x02, 0x4e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x87, 0x03, 0x00,
+		   0x00, 0x02, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x05,
+		   0x00, 0xf2, 0x00, 0x02, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x05, 0x00, 0xf2, 0x00),
+	PHYREGS(0x093c, 0x0938, 0x0934, 0x01bc, 0x01bc, 0x01bd),
+  },
+  {	.freq			= 5910,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x87, 0x03, 0x00,
+		   0x00, 0x01, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x05,
+		   0x00, 0xf2, 0x00, 0x01, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x05, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0940, 0x093c, 0x0938, 0x01bb, 0x01bc, 0x01bc),
+  },
+  {	.freq			= 2412,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x6c, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x04, 0x04, 0x04, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xff, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0f, 0x00, 0xff, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0f),
+	PHYREGS(0x03c9, 0x03c5, 0x03c1, 0x043a, 0x043f, 0x0443),
+  },
+  {	.freq			= 2417,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x71, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xff, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0f, 0x00, 0xff, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0f),
+	PHYREGS(0x03cb, 0x03c7, 0x03c3, 0x0438, 0x043d, 0x0441),
+  },
+  {	.freq			= 2422,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x76, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xff, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0f, 0x00, 0xff, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0f),
+	PHYREGS(0x03cd, 0x03c9, 0x03c5, 0x0436, 0x043a, 0x043f),
+  },
+  {	.freq			= 2427,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x7b, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xfd, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0f, 0x00, 0xfd, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0f),
+	PHYREGS(0x03cf, 0x03cb, 0x03c7, 0x0434, 0x0438, 0x043d),
+  },
+  {	.freq			= 2432,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x80, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xfb, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0f, 0x00, 0xfb, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0f),
+	PHYREGS(0x03d1, 0x03cd, 0x03c9, 0x0431, 0x0436, 0x043a),
+  },
+  {	.freq			= 2437,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x85, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xfa, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0f, 0x00, 0xfa, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0f),
+	PHYREGS(0x03d3, 0x03cf, 0x03cb, 0x042f, 0x0434, 0x0438),
+  },
+  {	.freq			= 2442,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8a, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf8, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0f, 0x00, 0xf8, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0f),
+	PHYREGS(0x03d5, 0x03d1, 0x03cd, 0x042d, 0x0431, 0x0436),
+  },
+  {	.freq			= 2447,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8f, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf7, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0f, 0x00, 0xf7, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0f),
+	PHYREGS(0x03d7, 0x03d3, 0x03cf, 0x042b, 0x042f, 0x0434),
+  },
+  {	.freq			= 2452,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x94, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf6, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0f, 0x00, 0xf6, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0f),
+	PHYREGS(0x03d9, 0x03d5, 0x03d1, 0x0429, 0x042d, 0x0431),
+  },
+  {	.freq			= 2457,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x99, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf5, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0d, 0x00, 0xf5, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0d),
+	PHYREGS(0x03db, 0x03d7, 0x03d3, 0x0427, 0x042b, 0x042f),
+  },
+  {	.freq			= 2462,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x9e, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf4, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0d, 0x00, 0xf4, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0d),
+	PHYREGS(0x03dd, 0x03d9, 0x03d5, 0x0424, 0x0429, 0x042d),
+  },
+  {	.freq			= 2467,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa3, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf3, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0d, 0x00, 0xf3, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0d),
+	PHYREGS(0x03df, 0x03db, 0x03d7, 0x0422, 0x0427, 0x042b),
+  },
+  {	.freq			= 2472,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa8, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf2, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0d, 0x00, 0xf2, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0d),
+	PHYREGS(0x03e1, 0x03dd, 0x03d9, 0x0420, 0x0424, 0x0429),
+  },
+  {	.freq			= 2484,
+	RADIOREGS3(0xff, 0x01, 0x03, 0x09, 0xb4, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf0, 0x00, 0x05, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0d, 0x00, 0xf0, 0x00, 0x05, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0d),
+	PHYREGS(0x03e6, 0x03e2, 0x03de, 0x041b, 0x041f, 0x0424),
+  },
+};
+
+static const struct b43_nphy_channeltab_entry_rev3 b43_nphy_channeltab_rev4[] = {
+  {	.freq			= 4920,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xec, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0e, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0e, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07b4, 0x07b0, 0x07ac, 0x0214, 0x0215, 0x0216),
+  },
+  {	.freq			= 4930,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xed, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0e, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0e, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07b8, 0x07b4, 0x07b0, 0x0213, 0x0214, 0x0215),
+  },
+  {	.freq			= 4940,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xee, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0e, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0e, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07bc, 0x07b8, 0x07b4, 0x0212, 0x0213, 0x0214),
+  },
+  {	.freq			= 4950,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xef, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0e, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0e, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07c0, 0x07bc, 0x07b8, 0x0211, 0x0212, 0x0213),
+  },
+  {	.freq			= 4960,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf0, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0e, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0e, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07c4, 0x07c0, 0x07bc, 0x020f, 0x0211, 0x0212),
+  },
+  {	.freq			= 4970,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf1, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0e, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0e, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07c8, 0x07c4, 0x07c0, 0x020e, 0x020f, 0x0211),
+  },
+  {	.freq			= 4980,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf2, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0e, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0e, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07cc, 0x07c8, 0x07c4, 0x020d, 0x020e, 0x020f),
+  },
+  {	.freq			= 4990,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf3, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0e, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0e, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07d0, 0x07cc, 0x07c8, 0x020c, 0x020d, 0x020e),
+  },
+  {	.freq			= 5000,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf4, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0d, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0d, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07d4, 0x07d0, 0x07cc, 0x020b, 0x020c, 0x020d),
+  },
+  {	.freq			= 5010,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf5, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0d, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0d, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07d8, 0x07d4, 0x07d0, 0x020a, 0x020b, 0x020c),
+  },
+  {	.freq			= 5020,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf6, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0d, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0d, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07dc, 0x07d8, 0x07d4, 0x0209, 0x020a, 0x020b),
+  },
+  {	.freq			= 5030,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf7, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0d, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0d, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07e0, 0x07dc, 0x07d8, 0x0208, 0x0209, 0x020a),
+  },
+  {	.freq			= 5040,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf8, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0d, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0d, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07e4, 0x07e0, 0x07dc, 0x0207, 0x0208, 0x0209),
+  },
+  {	.freq			= 5050,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf9, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0d, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0d, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07e8, 0x07e4, 0x07e0, 0x0206, 0x0207, 0x0208),
+  },
+  {	.freq			= 5060,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfa, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0d, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0d, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07ec, 0x07e8, 0x07e4, 0x0205, 0x0206, 0x0207),
+  },
+  {	.freq			= 5070,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfb, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0d, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0d, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07f0, 0x07ec, 0x07e8, 0x0204, 0x0205, 0x0206),
+  },
+  {	.freq			= 5080,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfc, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0d, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0d, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07f4, 0x07f0, 0x07ec, 0x0203, 0x0204, 0x0205),
+  },
+  {	.freq			= 5090,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfd, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0d, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xff, 0x00, 0xff, 0x00, 0x0d, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xff, 0x00),
+	PHYREGS(0x07f8, 0x07f4, 0x07f0, 0x0202, 0x0203, 0x0204),
+  },
+  {	.freq			= 5100,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xfe, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0c, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfe, 0x00, 0xff, 0x00, 0x0c, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfe, 0x00),
+	PHYREGS(0x07fc, 0x07f8, 0x07f4, 0x0201, 0x0202, 0x0203),
+  },
+  {	.freq			= 5110,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xff, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0c, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfe, 0x00, 0xff, 0x00, 0x0c, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfe, 0x00),
+	PHYREGS(0x0800, 0x07fc, 0x07f8, 0x0200, 0x0201, 0x0202),
+  },
+  {	.freq			= 5120,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x00, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0c, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfe, 0x00, 0xff, 0x00, 0x0c, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfe, 0x00),
+	PHYREGS(0x0804, 0x0800, 0x07fc, 0x01ff, 0x0200, 0x0201),
+  },
+  {	.freq			= 5130,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x01, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0c, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfe, 0x00, 0xff, 0x00, 0x0c, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfe, 0x00),
+	PHYREGS(0x0808, 0x0804, 0x0800, 0x01fe, 0x01ff, 0x0200),
+  },
+  {	.freq			= 5140,
+	RADIOREGS3(0xc6, 0x01, 0x01, 0x02, 0x02, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0c, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfe, 0x00, 0xff, 0x00, 0x0c, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfe, 0x00),
+	PHYREGS(0x080c, 0x0808, 0x0804, 0x01fd, 0x01fe, 0x01ff),
+  },
+  {	.freq			= 5160,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x04, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0c, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfe, 0x00, 0xff, 0x00, 0x0c, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfe, 0x00),
+	PHYREGS(0x0814, 0x0810, 0x080c, 0x01fb, 0x01fc, 0x01fd),
+  },
+  {	.freq			= 5170,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x05, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0c, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfe, 0x00, 0xff, 0x00, 0x0c, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfe, 0x00),
+	PHYREGS(0x0818, 0x0814, 0x0810, 0x01fa, 0x01fb, 0x01fc),
+  },
+  {	.freq			= 5180,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x06, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xef, 0x00, 0x0c, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfe, 0x00, 0xef, 0x00, 0x0c, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfe, 0x00),
+	PHYREGS(0x081c, 0x0818, 0x0814, 0x01f9, 0x01fa, 0x01fb),
+  },
+  {	.freq			= 5190,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x07, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xef, 0x00, 0x0c, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfe, 0x00, 0xef, 0x00, 0x0c, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfe, 0x00),
+	PHYREGS(0x0820, 0x081c, 0x0818, 0x01f8, 0x01f9, 0x01fa),
+  },
+  {	.freq			= 5200,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x08, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xef, 0x00, 0x0a, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfc, 0x00, 0xef, 0x00, 0x0a, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0824, 0x0820, 0x081c, 0x01f7, 0x01f8, 0x01f9),
+  },
+  {	.freq			= 5210,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x09, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xdf, 0x00, 0x0a, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfc, 0x00, 0xdf, 0x00, 0x0a, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0828, 0x0824, 0x0820, 0x01f6, 0x01f7, 0x01f8),
+  },
+  {	.freq			= 5220,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xdf, 0x00, 0x0a, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfc, 0x00, 0xdf, 0x00, 0x0a, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfc, 0x00),
+	PHYREGS(0x082c, 0x0828, 0x0824, 0x01f5, 0x01f6, 0x01f7),
+  },
+  {	.freq			= 5230,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xdf, 0x00, 0x0a, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfc, 0x00, 0xdf, 0x00, 0x0a, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0830, 0x082c, 0x0828, 0x01f4, 0x01f5, 0x01f6),
+  },
+  {	.freq			= 5240,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xcf, 0x00, 0x0a, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfc, 0x00, 0xcf, 0x00, 0x0a, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0834, 0x0830, 0x082c, 0x01f3, 0x01f4, 0x01f5),
+  },
+  {	.freq			= 5250,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xcf, 0x00, 0x0a, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfc, 0x00, 0xcf, 0x00, 0x0a, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0838, 0x0834, 0x0830, 0x01f2, 0x01f3, 0x01f4),
+  },
+  {	.freq			= 5260,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xcf, 0x00, 0x0a, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfc, 0x00, 0xcf, 0x00, 0x0a, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfc, 0x00),
+	PHYREGS(0x083c, 0x0838, 0x0834, 0x01f1, 0x01f2, 0x01f3),
+  },
+  {	.freq			= 5270,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0f, 0x00,
+		   0xff, 0xcf, 0x00, 0x0a, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfc, 0x00, 0xcf, 0x00, 0x0a, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0840, 0x083c, 0x0838, 0x01f0, 0x01f1, 0x01f2),
+  },
+  {	.freq			= 5280,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x10, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0f, 0x00,
+		   0xff, 0xbf, 0x00, 0x0a, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfc, 0x00, 0xbf, 0x00, 0x0a, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0844, 0x0840, 0x083c, 0x01f0, 0x01f0, 0x01f1),
+  },
+  {	.freq			= 5290,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x11, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0f, 0x00,
+		   0xff, 0xbf, 0x00, 0x0a, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfc, 0x00, 0xbf, 0x00, 0x0a, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfc, 0x00),
+	PHYREGS(0x0848, 0x0844, 0x0840, 0x01ef, 0x01f0, 0x01f0),
+  },
+  {	.freq			= 5300,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x12, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xbf, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfa, 0x00, 0xbf, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfa, 0x00),
+	PHYREGS(0x084c, 0x0848, 0x0844, 0x01ee, 0x01ef, 0x01f0),
+  },
+  {	.freq			= 5310,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x13, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xbf, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfa, 0x00, 0xbf, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0850, 0x084c, 0x0848, 0x01ed, 0x01ee, 0x01ef),
+  },
+  {	.freq			= 5320,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x14, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xbf, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfa, 0x00, 0xbf, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0854, 0x0850, 0x084c, 0x01ec, 0x01ed, 0x01ee),
+  },
+  {	.freq			= 5330,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x15, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xaf, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfa, 0x00, 0xaf, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0858, 0x0854, 0x0850, 0x01eb, 0x01ec, 0x01ed),
+  },
+  {	.freq			= 5340,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x16, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xaf, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfa, 0x00, 0xaf, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfa, 0x00),
+	PHYREGS(0x085c, 0x0858, 0x0854, 0x01ea, 0x01eb, 0x01ec),
+  },
+  {	.freq			= 5350,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x17, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x9f, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfa, 0x00, 0x9f, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0860, 0x085c, 0x0858, 0x01e9, 0x01ea, 0x01eb),
+  },
+  {	.freq			= 5360,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x18, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x9f, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfa, 0x00, 0x9f, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0864, 0x0860, 0x085c, 0x01e8, 0x01e9, 0x01ea),
+  },
+  {	.freq			= 5370,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x19, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x9f, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfa, 0x00, 0x9f, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0868, 0x0864, 0x0860, 0x01e7, 0x01e8, 0x01e9),
+  },
+  {	.freq			= 5380,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x9f, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfa, 0x00, 0x9f, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfa, 0x00),
+	PHYREGS(0x086c, 0x0868, 0x0864, 0x01e6, 0x01e7, 0x01e8),
+  },
+  {	.freq			= 5390,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x8f, 0x00, 0x08, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xfa, 0x00, 0x8f, 0x00, 0x08, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xfa, 0x00),
+	PHYREGS(0x0870, 0x086c, 0x0868, 0x01e5, 0x01e6, 0x01e7),
+  },
+  {	.freq			= 5400,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x8f, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xf8, 0x00, 0x8f, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0874, 0x0870, 0x086c, 0x01e5, 0x01e5, 0x01e6),
+  },
+  {	.freq			= 5410,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x8f, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xf8, 0x00, 0x8f, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0878, 0x0874, 0x0870, 0x01e4, 0x01e5, 0x01e5),
+  },
+  {	.freq			= 5420,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x8e, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xf8, 0x00, 0x8e, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xf8, 0x00),
+	PHYREGS(0x087c, 0x0878, 0x0874, 0x01e3, 0x01e4, 0x01e5),
+  },
+  {	.freq			= 5430,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x8e, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xf8, 0x00, 0x8e, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0880, 0x087c, 0x0878, 0x01e2, 0x01e3, 0x01e4),
+  },
+  {	.freq			= 5440,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x20, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x7e, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xf8, 0x00, 0x7e, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0884, 0x0880, 0x087c, 0x01e1, 0x01e2, 0x01e3),
+  },
+  {	.freq			= 5450,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x21, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x7d, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xf8, 0x00, 0x7d, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0888, 0x0884, 0x0880, 0x01e0, 0x01e1, 0x01e2),
+  },
+  {	.freq			= 5460,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x22, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x6d, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xf8, 0x00, 0x6d, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xf8, 0x00),
+	PHYREGS(0x088c, 0x0888, 0x0884, 0x01df, 0x01e0, 0x01e1),
+  },
+  {	.freq			= 5470,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x23, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x6d, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xf8, 0x00, 0x6d, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0890, 0x088c, 0x0888, 0x01de, 0x01df, 0x01e0),
+  },
+  {	.freq			= 5480,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x24, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x5d, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xf8, 0x00, 0x5d, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0894, 0x0890, 0x088c, 0x01dd, 0x01de, 0x01df),
+  },
+  {	.freq			= 5490,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x25, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x5c, 0x00, 0x07, 0x00, 0x7f, 0x00, 0x0f,
+		   0x00, 0xf8, 0x00, 0x5c, 0x00, 0x07, 0x00, 0x7f,
+		   0x00, 0x0f, 0x00, 0xf8, 0x00),
+	PHYREGS(0x0898, 0x0894, 0x0890, 0x01dd, 0x01dd, 0x01de),
+  },
+  {	.freq			= 5500,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x26, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x5c, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0d,
+		   0x00, 0xf6, 0x00, 0x5c, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0d, 0x00, 0xf6, 0x00),
+	PHYREGS(0x089c, 0x0898, 0x0894, 0x01dc, 0x01dd, 0x01dd),
+  },
+  {	.freq			= 5510,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x27, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x4c, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0d,
+		   0x00, 0xf6, 0x00, 0x4c, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0d, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08a0, 0x089c, 0x0898, 0x01db, 0x01dc, 0x01dd),
+  },
+  {	.freq			= 5520,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x28, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x4c, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0d,
+		   0x00, 0xf6, 0x00, 0x4c, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0d, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08a4, 0x08a0, 0x089c, 0x01da, 0x01db, 0x01dc),
+  },
+  {	.freq			= 5530,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x29, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x3b, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0d,
+		   0x00, 0xf6, 0x00, 0x3b, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0d, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08a8, 0x08a4, 0x08a0, 0x01d9, 0x01da, 0x01db),
+  },
+  {	.freq			= 5540,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x3b, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0d,
+		   0x00, 0xf6, 0x00, 0x3b, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0d, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08ac, 0x08a8, 0x08a4, 0x01d8, 0x01d9, 0x01da),
+  },
+  {	.freq			= 5550,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x3b, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0d,
+		   0x00, 0xf6, 0x00, 0x3b, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0d, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08b0, 0x08ac, 0x08a8, 0x01d7, 0x01d8, 0x01d9),
+  },
+  {	.freq			= 5560,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x2b, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0d,
+		   0x00, 0xf6, 0x00, 0x2b, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0d, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08b4, 0x08b0, 0x08ac, 0x01d7, 0x01d7, 0x01d8),
+  },
+  {	.freq			= 5570,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x2a, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0d,
+		   0x00, 0xf6, 0x00, 0x2a, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0d, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08b8, 0x08b4, 0x08b0, 0x01d6, 0x01d7, 0x01d7),
+  },
+  {	.freq			= 5580,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x1a, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0d,
+		   0x00, 0xf6, 0x00, 0x1a, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0d, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08bc, 0x08b8, 0x08b4, 0x01d5, 0x01d6, 0x01d7),
+  },
+  {	.freq			= 5590,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x1a, 0x00, 0x06, 0x00, 0x7f, 0x00, 0x0d,
+		   0x00, 0xf6, 0x00, 0x1a, 0x00, 0x06, 0x00, 0x7f,
+		   0x00, 0x0d, 0x00, 0xf6, 0x00),
+	PHYREGS(0x08c0, 0x08bc, 0x08b8, 0x01d4, 0x01d5, 0x01d6),
+  },
+  {	.freq			= 5600,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x30, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x1a, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xf4, 0x00, 0x1a, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08c4, 0x08c0, 0x08bc, 0x01d3, 0x01d4, 0x01d5),
+  },
+  {	.freq			= 5610,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x31, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x19, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xf4, 0x00, 0x19, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08c8, 0x08c4, 0x08c0, 0x01d2, 0x01d3, 0x01d4),
+  },
+  {	.freq			= 5620,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x32, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x19, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xf4, 0x00, 0x19, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08cc, 0x08c8, 0x08c4, 0x01d2, 0x01d2, 0x01d3),
+  },
+  {	.freq			= 5630,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x33, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x09, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xf4, 0x00, 0x09, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08d0, 0x08cc, 0x08c8, 0x01d1, 0x01d2, 0x01d2),
+  },
+  {	.freq			= 5640,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x34, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x09, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xf4, 0x00, 0x09, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08d4, 0x08d0, 0x08cc, 0x01d0, 0x01d1, 0x01d2),
+  },
+  {	.freq			= 5650,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x35, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x08, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xf4, 0x00, 0x08, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08d8, 0x08d4, 0x08d0, 0x01cf, 0x01d0, 0x01d1),
+  },
+  {	.freq			= 5660,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x36, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x08, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xf4, 0x00, 0x08, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08dc, 0x08d8, 0x08d4, 0x01ce, 0x01cf, 0x01d0),
+  },
+  {	.freq			= 5670,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x37, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x08, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xf4, 0x00, 0x08, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08e0, 0x08dc, 0x08d8, 0x01ce, 0x01ce, 0x01cf),
+  },
+  {	.freq			= 5680,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x38, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x08, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xf4, 0x00, 0x08, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08e4, 0x08e0, 0x08dc, 0x01cd, 0x01ce, 0x01ce),
+  },
+  {	.freq			= 5690,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x39, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x07, 0x00, 0x04, 0x00, 0x7f, 0x00, 0x0b,
+		   0x00, 0xf4, 0x00, 0x07, 0x00, 0x04, 0x00, 0x7f,
+		   0x00, 0x0b, 0x00, 0xf4, 0x00),
+	PHYREGS(0x08e8, 0x08e4, 0x08e0, 0x01cc, 0x01cd, 0x01ce),
+  },
+  {	.freq			= 5700,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x07, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x07, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x08ec, 0x08e8, 0x08e4, 0x01cb, 0x01cc, 0x01cd),
+  },
+  {	.freq			= 5710,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x07, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x07, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x08f0, 0x08ec, 0x08e8, 0x01ca, 0x01cb, 0x01cc),
+  },
+  {	.freq			= 5720,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x07, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x07, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x08f4, 0x08f0, 0x08ec, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5725,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x79, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x06, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x08f6, 0x08f2, 0x08ee, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5730,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x06, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x08f8, 0x08f4, 0x08f0, 0x01c9, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5735,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x7b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x06, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x08fa, 0x08f6, 0x08f2, 0x01c8, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5740,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x06, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x08fc, 0x08f8, 0x08f4, 0x01c8, 0x01c9, 0x01c9),
+  },
+  {	.freq			= 5745,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x06, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x08fe, 0x08fa, 0x08f6, 0x01c8, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5750,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x06, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x06, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0900, 0x08fc, 0x08f8, 0x01c7, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5755,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7f, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x05, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0902, 0x08fe, 0x08fa, 0x01c7, 0x01c8, 0x01c8),
+  },
+  {	.freq			= 5760,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x40, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x05, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0904, 0x0900, 0x08fc, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5765,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x81, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x05, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0906, 0x0902, 0x08fe, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5770,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x41, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x05, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0908, 0x0904, 0x0900, 0x01c6, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5775,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x83, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x05, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x090a, 0x0906, 0x0902, 0x01c5, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5780,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x42, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x05, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x05, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x090c, 0x0908, 0x0904, 0x01c5, 0x01c6, 0x01c6),
+  },
+  {	.freq			= 5785,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x85, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x8a, 0x06, 0x00,
+		   0x40, 0x04, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x04, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x090e, 0x090a, 0x0906, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5790,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x43, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x8a, 0x06, 0x00,
+		   0x40, 0x04, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x04, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0910, 0x090c, 0x0908, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5795,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x87, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x8a, 0x06, 0x00,
+		   0x40, 0x04, 0x00, 0x03, 0x00, 0x7f, 0x00, 0x0a,
+		   0x00, 0xf2, 0x00, 0x04, 0x00, 0x03, 0x00, 0x7f,
+		   0x00, 0x0a, 0x00, 0xf2, 0x00),
+	PHYREGS(0x0912, 0x090e, 0x090a, 0x01c4, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5800,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x44, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x04, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x04, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x0914, 0x0910, 0x090c, 0x01c3, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5805,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x89, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x04, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x04, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x0916, 0x0912, 0x090e, 0x01c3, 0x01c4, 0x01c4),
+  },
+  {	.freq			= 5810,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x45, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x04, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x04, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x0918, 0x0914, 0x0910, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5815,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x04, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x04, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x091a, 0x0916, 0x0912, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5820,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x46, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x03, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x091c, 0x0918, 0x0914, 0x01c2, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5825,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x03, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x091e, 0x091a, 0x0916, 0x01c1, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5830,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x47, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x03, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x0920, 0x091c, 0x0918, 0x01c1, 0x01c2, 0x01c2),
+  },
+  {	.freq			= 5840,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x48, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x03, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x0924, 0x0920, 0x091c, 0x01c0, 0x01c1, 0x01c2),
+  },
+  {	.freq			= 5850,
+	RADIOREGS3(0xe0, 0x00, 0x01, 0x02, 0x49, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x03, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x0928, 0x0924, 0x0920, 0x01bf, 0x01c0, 0x01c1),
+  },
+  {	.freq			= 5860,
+	RADIOREGS3(0xde, 0x00, 0x01, 0x02, 0x4a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x03, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x03, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x092c, 0x0928, 0x0924, 0x01bf, 0x01bf, 0x01c0),
+  },
+  {	.freq			= 5870,
+	RADIOREGS3(0xdb, 0x00, 0x01, 0x02, 0x4b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x02, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x02, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x0930, 0x092c, 0x0928, 0x01be, 0x01bf, 0x01bf),
+  },
+  {	.freq			= 5880,
+	RADIOREGS3(0xd8, 0x00, 0x01, 0x02, 0x4c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x02, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x02, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x0934, 0x0930, 0x092c, 0x01bd, 0x01be, 0x01bf),
+  },
+  {	.freq			= 5890,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x02, 0x00, 0x02, 0x00, 0x7f, 0x00, 0x09,
+		   0x00, 0xf0, 0x00, 0x02, 0x00, 0x02, 0x00, 0x7f,
+		   0x00, 0x09, 0x00, 0xf0, 0x00),
+	PHYREGS(0x0938, 0x0934, 0x0930, 0x01bc, 0x01bd, 0x01be),
+  },
+  {	.freq			= 5900,
+	RADIOREGS3(0xd3, 0x00, 0x01, 0x02, 0x4e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x87, 0x03, 0x00,
+		   0x00, 0x02, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf0, 0x00, 0x02, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf0, 0x00),
+	PHYREGS(0x093c, 0x0938, 0x0934, 0x01bc, 0x01bc, 0x01bd),
+  },
+  {	.freq			= 5910,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x87, 0x03, 0x00,
+		   0x00, 0x01, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x07,
+		   0x00, 0xf0, 0x00, 0x01, 0x00, 0x00, 0x00, 0x7f,
+		   0x00, 0x07, 0x00, 0xf0, 0x00),
+	PHYREGS(0x0940, 0x093c, 0x0938, 0x01bb, 0x01bc, 0x01bc),
+  },
+  {	.freq			= 2412,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x6c, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x04, 0x04, 0x04, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xff, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xff, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03c9, 0x03c5, 0x03c1, 0x043a, 0x043f, 0x0443),
+  },
+  {	.freq			= 2417,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x71, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xff, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xff, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03cb, 0x03c7, 0x03c3, 0x0438, 0x043d, 0x0441),
+  },
+  {	.freq			= 2422,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x76, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xff, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xff, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03cd, 0x03c9, 0x03c5, 0x0436, 0x043a, 0x043f),
+  },
+  {	.freq			= 2427,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x7b, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xfd, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xfd, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03cf, 0x03cb, 0x03c7, 0x0434, 0x0438, 0x043d),
+  },
+  {	.freq			= 2432,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x80, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xfb, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xfb, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03d1, 0x03cd, 0x03c9, 0x0431, 0x0436, 0x043a),
+  },
+  {	.freq			= 2437,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x85, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xfa, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xfa, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03d3, 0x03cf, 0x03cb, 0x042f, 0x0434, 0x0438),
+  },
+  {	.freq			= 2442,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8a, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf8, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xf8, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03d5, 0x03d1, 0x03cd, 0x042d, 0x0431, 0x0436),
+  },
+  {	.freq			= 2447,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8f, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf7, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xf7, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03d7, 0x03d3, 0x03cf, 0x042b, 0x042f, 0x0434),
+  },
+  {	.freq			= 2452,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x94, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf6, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xf6, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03d9, 0x03d5, 0x03d1, 0x0429, 0x042d, 0x0431),
+  },
+  {	.freq			= 2457,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x99, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf5, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xf5, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03db, 0x03d7, 0x03d3, 0x0427, 0x042b, 0x042f),
+  },
+  {	.freq			= 2462,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x9e, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf4, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xf4, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03dd, 0x03d9, 0x03d5, 0x0424, 0x0429, 0x042d),
+  },
+  {	.freq			= 2467,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa3, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf3, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xf3, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03df, 0x03db, 0x03d7, 0x0422, 0x0427, 0x042b),
+  },
+  {	.freq			= 2472,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa8, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf2, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xf2, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03e1, 0x03dd, 0x03d9, 0x0420, 0x0424, 0x0429),
+  },
+  {	.freq			= 2484,
+	RADIOREGS3(0xff, 0x01, 0x03, 0x09, 0xb4, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0xf0, 0x00, 0x04, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0e, 0x00, 0xf0, 0x00, 0x04, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0e),
+	PHYREGS(0x03e6, 0x03e2, 0x03de, 0x041b, 0x041f, 0x0424),
+  },
+};
+
+static const struct b43_nphy_channeltab_entry_rev3 b43_nphy_channeltab_rev5[] = {
+  {	.freq			= 4920,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xec, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0b, 0x00, 0x70, 0x00, 0x0f,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0b, 0x00, 0x70,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07b4, 0x07b0, 0x07ac, 0x0214, 0x0215, 0x0216),
+  },
+  {	.freq			= 4930,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xed, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0b, 0x00, 0x70, 0x00, 0x0e,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0b, 0x00, 0x70,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07b8, 0x07b4, 0x07b0, 0x0213, 0x0214, 0x0215),
+  },
+  {	.freq			= 4940,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xee, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0b, 0x00, 0x70, 0x00, 0x0e,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0b, 0x00, 0x70,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07bc, 0x07b8, 0x07b4, 0x0212, 0x0213, 0x0214),
+  },
+  {	.freq			= 4950,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xef, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0b, 0x00, 0x70, 0x00, 0x0e,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0b, 0x00, 0x70,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c0, 0x07bc, 0x07b8, 0x0211, 0x0212, 0x0213),
+  },
+  {	.freq			= 4960,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf0, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0e,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c4, 0x07c0, 0x07bc, 0x020f, 0x0211, 0x0212),
+  },
+  {	.freq			= 4970,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf1, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c8, 0x07c4, 0x07c0, 0x020e, 0x020f, 0x0211),
+  },
+  {	.freq			= 4980,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf2, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07cc, 0x07c8, 0x07c4, 0x020d, 0x020e, 0x020f),
+  },
+  {	.freq			= 4990,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf3, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d0, 0x07cc, 0x07c8, 0x020c, 0x020d, 0x020e),
+  },
+  {	.freq			= 5000,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf4, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d4, 0x07d0, 0x07cc, 0x020b, 0x020c, 0x020d),
+  },
+  {	.freq			= 5010,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf5, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d8, 0x07d4, 0x07d0, 0x020a, 0x020b, 0x020c),
+  },
+  {	.freq			= 5020,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf6, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x09, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x09, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07dc, 0x07d8, 0x07d4, 0x0209, 0x020a, 0x020b),
+  },
+  {	.freq			= 5030,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf7, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x09, 0x00, 0x70, 0x00, 0x0c,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x09, 0x00, 0x70,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e0, 0x07dc, 0x07d8, 0x0208, 0x0209, 0x020a),
+  },
+  {	.freq			= 5040,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf8, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x70, 0x00, 0x0c,
+		   0x00, 0x9f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x70,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e4, 0x07e0, 0x07dc, 0x0207, 0x0208, 0x0209),
+  },
+  {	.freq			= 5050,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf9, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x70, 0x00, 0x0c,
+		   0x00, 0x9f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x70,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e8, 0x07e4, 0x07e0, 0x0206, 0x0207, 0x0208),
+  },
+  {	.freq			= 5060,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfa, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x09, 0x00, 0x70, 0x00, 0x0c,
+		   0x00, 0x9f, 0x00, 0xfd, 0x00, 0x09, 0x00, 0x70,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07ec, 0x07e8, 0x07e4, 0x0205, 0x0206, 0x0207),
+  },
+  {	.freq			= 5070,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfb, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfd, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f0, 0x07ec, 0x07e8, 0x0204, 0x0205, 0x0206),
+  },
+  {	.freq			= 5080,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfc, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f4, 0x07f0, 0x07ec, 0x0203, 0x0204, 0x0205),
+  },
+  {	.freq			= 5090,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfd, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f8, 0x07f4, 0x07f0, 0x0202, 0x0203, 0x0204),
+  },
+  {	.freq			= 5100,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xfe, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07fc, 0x07f8, 0x07f4, 0x0201, 0x0202, 0x0203),
+  },
+  {	.freq			= 5110,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xff, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0800, 0x07fc, 0x07f8, 0x0200, 0x0201, 0x0202),
+  },
+  {	.freq			= 5120,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x00, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0804, 0x0800, 0x07fc, 0x01ff, 0x0200, 0x0201),
+  },
+  {	.freq			= 5130,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x01, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfb, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0a,
+		   0x00, 0x9f, 0x00, 0xfb, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0808, 0x0804, 0x0800, 0x01fe, 0x01ff, 0x0200),
+  },
+  {	.freq			= 5140,
+	RADIOREGS3(0xc6, 0x01, 0x01, 0x02, 0x02, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfb, 0x00, 0x07, 0x00, 0x70, 0x00, 0x0a,
+		   0x00, 0x9f, 0x00, 0xfb, 0x00, 0x07, 0x00, 0x70,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x080c, 0x0808, 0x0804, 0x01fd, 0x01fe, 0x01ff),
+  },
+  {	.freq			= 5160,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x04, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfb, 0x00, 0x07, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfb, 0x00, 0x07, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0814, 0x0810, 0x080c, 0x01fb, 0x01fc, 0x01fd),
+  },
+  {	.freq			= 5170,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x05, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfb, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfb, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0818, 0x0814, 0x0810, 0x01fa, 0x01fb, 0x01fc),
+  },
+  {	.freq			= 5180,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x06, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfa, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x081c, 0x0818, 0x0814, 0x01f9, 0x01fa, 0x01fb),
+  },
+  {	.freq			= 5190,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x07, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfa, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0820, 0x081c, 0x0818, 0x01f8, 0x01f9, 0x01fa),
+  },
+  {	.freq			= 5200,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x08, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfa, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0824, 0x0820, 0x081c, 0x01f7, 0x01f8, 0x01f9),
+  },
+  {	.freq			= 5210,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x09, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfa, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0828, 0x0824, 0x0820, 0x01f6, 0x01f7, 0x01f8),
+  },
+  {	.freq			= 5220,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfa, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x082c, 0x0828, 0x0824, 0x01f5, 0x01f6, 0x01f7),
+  },
+  {	.freq			= 5230,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xea, 0x00, 0x06, 0x00, 0x70, 0x00, 0x08,
+		   0x00, 0x9e, 0x00, 0xea, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x08, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0830, 0x082c, 0x0828, 0x01f4, 0x01f5, 0x01f6),
+  },
+  {	.freq			= 5240,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xe9, 0x00, 0x05, 0x00, 0x70, 0x00, 0x08,
+		   0x00, 0x9d, 0x00, 0xe9, 0x00, 0x05, 0x00, 0x70,
+		   0x00, 0x08, 0x00, 0x6d, 0x00),
+	PHYREGS(0x0834, 0x0830, 0x082c, 0x01f3, 0x01f4, 0x01f5),
+  },
+  {	.freq			= 5250,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xe9, 0x00, 0x05, 0x00, 0x70, 0x00, 0x08,
+		   0x00, 0x9d, 0x00, 0xe9, 0x00, 0x05, 0x00, 0x70,
+		   0x00, 0x08, 0x00, 0x6d, 0x00),
+	PHYREGS(0x0838, 0x0834, 0x0830, 0x01f2, 0x01f3, 0x01f4),
+  },
+  {	.freq			= 5260,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xd9, 0x00, 0x05, 0x00, 0x70, 0x00, 0x08,
+		   0x00, 0x9d, 0x00, 0xd9, 0x00, 0x05, 0x00, 0x70,
+		   0x00, 0x08, 0x00, 0x6d, 0x00),
+	PHYREGS(0x083c, 0x0838, 0x0834, 0x01f1, 0x01f2, 0x01f3),
+  },
+  {	.freq			= 5270,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0f, 0x00,
+		   0xff, 0xd8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xd8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0840, 0x083c, 0x0838, 0x01f0, 0x01f1, 0x01f2),
+  },
+  {	.freq			= 5280,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x10, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0f, 0x00,
+		   0xff, 0xc8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xc8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0844, 0x0840, 0x083c, 0x01f0, 0x01f0, 0x01f1),
+  },
+  {	.freq			= 5290,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x11, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0f, 0x00,
+		   0xff, 0xc8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xc8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0848, 0x0844, 0x0840, 0x01ef, 0x01f0, 0x01f0),
+  },
+  {	.freq			= 5300,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x12, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xc8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xc8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x084c, 0x0848, 0x0844, 0x01ee, 0x01ef, 0x01f0),
+  },
+  {	.freq			= 5310,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x13, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xc8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xc8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0850, 0x084c, 0x0848, 0x01ed, 0x01ee, 0x01ef),
+  },
+  {	.freq			= 5320,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x14, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xb8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xb8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0854, 0x0850, 0x084c, 0x01ec, 0x01ed, 0x01ee),
+  },
+  {	.freq			= 5330,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x15, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xb7, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9b, 0x00, 0xb7, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0858, 0x0854, 0x0850, 0x01eb, 0x01ec, 0x01ed),
+  },
+  {	.freq			= 5340,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x16, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xb7, 0x00, 0x03, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9b, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6b, 0x00),
+	PHYREGS(0x085c, 0x0858, 0x0854, 0x01ea, 0x01eb, 0x01ec),
+  },
+  {	.freq			= 5350,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x17, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xa7, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9b, 0x00, 0xa7, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0860, 0x085c, 0x0858, 0x01e9, 0x01ea, 0x01eb),
+  },
+  {	.freq			= 5360,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x18, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xa6, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9b, 0x00, 0xa6, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0864, 0x0860, 0x085c, 0x01e8, 0x01e9, 0x01ea),
+  },
+  {	.freq			= 5370,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x19, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0xa6, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9b, 0x00, 0xa6, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x5b, 0x00),
+	PHYREGS(0x0868, 0x0864, 0x0860, 0x01e7, 0x01e8, 0x01e9),
+  },
+  {	.freq			= 5380,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x96, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9a, 0x00, 0x96, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x5a, 0x00),
+	PHYREGS(0x086c, 0x0868, 0x0864, 0x01e6, 0x01e7, 0x01e8),
+  },
+  {	.freq			= 5390,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8f, 0x0e, 0x00,
+		   0xff, 0x95, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9a, 0x00, 0x95, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x5a, 0x00),
+	PHYREGS(0x0870, 0x086c, 0x0868, 0x01e5, 0x01e6, 0x01e7),
+  },
+  {	.freq			= 5400,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x95, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9a, 0x00, 0x95, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x5a, 0x00),
+	PHYREGS(0x0874, 0x0870, 0x086c, 0x01e5, 0x01e5, 0x01e6),
+  },
+  {	.freq			= 5410,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x95, 0x00, 0x03, 0x00, 0x70, 0x00, 0x05,
+		   0x00, 0x9a, 0x00, 0x95, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x05, 0x00, 0x5a, 0x00),
+	PHYREGS(0x0878, 0x0874, 0x0870, 0x01e4, 0x01e5, 0x01e5),
+  },
+  {	.freq			= 5420,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x95, 0x00, 0x03, 0x00, 0x70, 0x00, 0x05,
+		   0x00, 0x9a, 0x00, 0x95, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x05, 0x00, 0x5a, 0x00),
+	PHYREGS(0x087c, 0x0878, 0x0874, 0x01e3, 0x01e4, 0x01e5),
+  },
+  {	.freq			= 5430,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x85, 0x00, 0x02, 0x00, 0x70, 0x00, 0x05,
+		   0x00, 0x99, 0x00, 0x85, 0x00, 0x02, 0x00, 0x70,
+		   0x00, 0x05, 0x00, 0x59, 0x00),
+	PHYREGS(0x0880, 0x087c, 0x0878, 0x01e2, 0x01e3, 0x01e4),
+  },
+  {	.freq			= 5440,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x20, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x84, 0x00, 0x02, 0x00, 0x70, 0x00, 0x05,
+		   0x00, 0x99, 0x00, 0x84, 0x00, 0x02, 0x00, 0x70,
+		   0x00, 0x05, 0x00, 0x59, 0x00),
+	PHYREGS(0x0884, 0x0880, 0x087c, 0x01e1, 0x01e2, 0x01e3),
+  },
+  {	.freq			= 5450,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x21, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x84, 0x00, 0x02, 0x00, 0x70, 0x00, 0x05,
+		   0x00, 0x99, 0x00, 0x84, 0x00, 0x02, 0x00, 0x70,
+		   0x00, 0x05, 0x00, 0x59, 0x00),
+	PHYREGS(0x0888, 0x0884, 0x0880, 0x01e0, 0x01e1, 0x01e2),
+  },
+  {	.freq			= 5460,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x22, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x84, 0x00, 0x02, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x99, 0x00, 0x84, 0x00, 0x02, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x69, 0x00),
+	PHYREGS(0x088c, 0x0888, 0x0884, 0x01df, 0x01e0, 0x01e1),
+  },
+  {	.freq			= 5470,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x23, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x74, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x99, 0x00, 0x74, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x69, 0x00),
+	PHYREGS(0x0890, 0x088c, 0x0888, 0x01de, 0x01df, 0x01e0),
+  },
+  {	.freq			= 5480,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x24, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x73, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x98, 0x00, 0x73, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x0894, 0x0890, 0x088c, 0x01dd, 0x01de, 0x01df),
+  },
+  {	.freq			= 5490,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x25, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0d, 0x00,
+		   0xc8, 0x73, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x98, 0x00, 0x73, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x0898, 0x0894, 0x0890, 0x01dd, 0x01dd, 0x01de),
+  },
+  {	.freq			= 5500,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x26, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x73, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x98, 0x00, 0x73, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x78, 0x00),
+	PHYREGS(0x089c, 0x0898, 0x0894, 0x01dc, 0x01dd, 0x01dd),
+  },
+  {	.freq			= 5510,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x27, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x73, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x98, 0x00, 0x73, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x78, 0x00),
+	PHYREGS(0x08a0, 0x089c, 0x0898, 0x01db, 0x01dc, 0x01dd),
+  },
+  {	.freq			= 5520,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x28, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x73, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x98, 0x00, 0x73, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x78, 0x00),
+	PHYREGS(0x08a4, 0x08a0, 0x089c, 0x01da, 0x01db, 0x01dc),
+  },
+  {	.freq			= 5530,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x29, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x63, 0x00, 0x01, 0x00, 0x70, 0x00, 0x03,
+		   0x00, 0x98, 0x00, 0x63, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x03, 0x00, 0x78, 0x00),
+	PHYREGS(0x08a8, 0x08a4, 0x08a0, 0x01d9, 0x01da, 0x01db),
+  },
+  {	.freq			= 5540,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x62, 0x00, 0x00, 0x00, 0x70, 0x00, 0x03,
+		   0x00, 0x97, 0x00, 0x62, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x03, 0x00, 0x77, 0x00),
+	PHYREGS(0x08ac, 0x08a8, 0x08a4, 0x01d8, 0x01d9, 0x01da),
+  },
+  {	.freq			= 5550,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x62, 0x00, 0x00, 0x00, 0x70, 0x00, 0x03,
+		   0x00, 0x97, 0x00, 0x62, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x03, 0x00, 0x77, 0x00),
+	PHYREGS(0x08b0, 0x08ac, 0x08a8, 0x01d7, 0x01d8, 0x01d9),
+  },
+  {	.freq			= 5560,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x62, 0x00, 0x00, 0x00, 0x70, 0x00, 0x03,
+		   0x00, 0x97, 0x00, 0x62, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x03, 0x00, 0x77, 0x00),
+	PHYREGS(0x08b4, 0x08b0, 0x08ac, 0x01d7, 0x01d7, 0x01d8),
+  },
+  {	.freq			= 5570,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x52, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x52, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x76, 0x00),
+	PHYREGS(0x08b8, 0x08b4, 0x08b0, 0x01d6, 0x01d7, 0x01d7),
+  },
+  {	.freq			= 5580,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x52, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x52, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x76, 0x00),
+	PHYREGS(0x08bc, 0x08b8, 0x08b4, 0x01d5, 0x01d6, 0x01d7),
+  },
+  {	.freq			= 5590,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8d, 0x0b, 0x00,
+		   0x84, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x76, 0x00),
+	PHYREGS(0x08c0, 0x08bc, 0x08b8, 0x01d4, 0x01d5, 0x01d6),
+  },
+  {	.freq			= 5600,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x30, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x76, 0x00),
+	PHYREGS(0x08c4, 0x08c0, 0x08bc, 0x01d3, 0x01d4, 0x01d5),
+  },
+  {	.freq			= 5610,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x31, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x76, 0x00),
+	PHYREGS(0x08c8, 0x08c4, 0x08c0, 0x01d2, 0x01d3, 0x01d4),
+  },
+  {	.freq			= 5620,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x32, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x76, 0x00),
+	PHYREGS(0x08cc, 0x08c8, 0x08c4, 0x01d2, 0x01d2, 0x01d3),
+  },
+  {	.freq			= 5630,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x33, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x76, 0x00),
+	PHYREGS(0x08d0, 0x08cc, 0x08c8, 0x01d1, 0x01d2, 0x01d2),
+  },
+  {	.freq			= 5640,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x34, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x95, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x75, 0x00),
+	PHYREGS(0x08d4, 0x08d0, 0x08cc, 0x01d0, 0x01d1, 0x01d2),
+  },
+  {	.freq			= 5650,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x35, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x50, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x95, 0x00, 0x50, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x75, 0x00),
+	PHYREGS(0x08d8, 0x08d4, 0x08d0, 0x01cf, 0x01d0, 0x01d1),
+  },
+  {	.freq			= 5660,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x36, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x50, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x95, 0x00, 0x50, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x75, 0x00),
+	PHYREGS(0x08dc, 0x08d8, 0x08d4, 0x01ce, 0x01cf, 0x01d0),
+  },
+  {	.freq			= 5670,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x37, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x74, 0x00),
+	PHYREGS(0x08e0, 0x08dc, 0x08d8, 0x01ce, 0x01ce, 0x01cf),
+  },
+  {	.freq			= 5680,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x38, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x74, 0x00),
+	PHYREGS(0x08e4, 0x08e0, 0x08dc, 0x01cd, 0x01ce, 0x01ce),
+  },
+  {	.freq			= 5690,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x39, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8b, 0x09, 0x00,
+		   0x70, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x74, 0x00),
+	PHYREGS(0x08e8, 0x08e4, 0x08e0, 0x01cc, 0x01cd, 0x01ce),
+  },
+  {	.freq			= 5700,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x74, 0x00),
+	PHYREGS(0x08ec, 0x08e8, 0x08e4, 0x01cb, 0x01cc, 0x01cd),
+  },
+  {	.freq			= 5710,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x74, 0x00),
+	PHYREGS(0x08f0, 0x08ec, 0x08e8, 0x01ca, 0x01cb, 0x01cc),
+  },
+  {	.freq			= 5720,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x74, 0x00),
+	PHYREGS(0x08f4, 0x08f0, 0x08ec, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5725,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x79, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x74, 0x00),
+	PHYREGS(0x08f6, 0x08f2, 0x08ee, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5730,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x84, 0x00),
+	PHYREGS(0x08f8, 0x08f4, 0x08f0, 0x01c9, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5735,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x7b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x83, 0x00),
+	PHYREGS(0x08fa, 0x08f6, 0x08f2, 0x01c8, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5740,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x83, 0x00),
+	PHYREGS(0x08fc, 0x08f8, 0x08f4, 0x01c8, 0x01c9, 0x01c9),
+  },
+  {	.freq			= 5745,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x83, 0x00),
+	PHYREGS(0x08fe, 0x08fa, 0x08f6, 0x01c8, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5750,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x83, 0x00),
+	PHYREGS(0x0900, 0x08fc, 0x08f8, 0x01c7, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5755,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7f, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x83, 0x00),
+	PHYREGS(0x0902, 0x08fe, 0x08fa, 0x01c7, 0x01c8, 0x01c8),
+  },
+  {	.freq			= 5760,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x40, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x20, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x20, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x83, 0x00),
+	PHYREGS(0x0904, 0x0900, 0x08fc, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5765,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x81, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x20, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x20, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x0906, 0x0902, 0x08fe, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5770,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x41, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x20, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x20, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x0908, 0x0904, 0x0900, 0x01c6, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5775,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x83, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x20, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x20, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x090a, 0x0906, 0x0902, 0x01c5, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5780,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x42, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x8a, 0x06, 0x00,
+		   0x40, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x090c, 0x0908, 0x0904, 0x01c5, 0x01c6, 0x01c6),
+  },
+  {	.freq			= 5785,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x85, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x8a, 0x06, 0x00,
+		   0x40, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x090e, 0x090a, 0x0906, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5790,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x43, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x8a, 0x06, 0x00,
+		   0x40, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x0910, 0x090c, 0x0908, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5795,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x87, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x8a, 0x06, 0x00,
+		   0x40, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x0912, 0x090e, 0x090a, 0x01c4, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5800,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x44, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x0914, 0x0910, 0x090c, 0x01c3, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5805,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x89, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x0916, 0x0912, 0x090e, 0x01c3, 0x01c4, 0x01c4),
+  },
+  {	.freq			= 5810,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x45, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x0918, 0x0914, 0x0910, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5815,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x091a, 0x0916, 0x0912, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5820,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x46, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x091c, 0x0918, 0x0914, 0x01c2, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5825,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x82, 0x00),
+	PHYREGS(0x091e, 0x091a, 0x0916, 0x01c1, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5830,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x47, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x72, 0x00),
+	PHYREGS(0x0920, 0x091c, 0x0918, 0x01c1, 0x01c2, 0x01c2),
+  },
+  {	.freq			= 5840,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x48, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x72, 0x00),
+	PHYREGS(0x0924, 0x0920, 0x091c, 0x01c0, 0x01c1, 0x01c2),
+  },
+  {	.freq			= 5850,
+	RADIOREGS3(0xe0, 0x00, 0x01, 0x02, 0x49, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x72, 0x00),
+	PHYREGS(0x0928, 0x0924, 0x0920, 0x01bf, 0x01c0, 0x01c1),
+  },
+  {	.freq			= 5860,
+	RADIOREGS3(0xde, 0x00, 0x01, 0x02, 0x4a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x72, 0x00),
+	PHYREGS(0x092c, 0x0928, 0x0924, 0x01bf, 0x01bf, 0x01c0),
+  },
+  {	.freq			= 5870,
+	RADIOREGS3(0xdb, 0x00, 0x01, 0x02, 0x4b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x71, 0x00),
+	PHYREGS(0x0930, 0x092c, 0x0928, 0x01be, 0x01bf, 0x01bf),
+  },
+  {	.freq			= 5880,
+	RADIOREGS3(0xd8, 0x00, 0x01, 0x02, 0x4c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x71, 0x00),
+	PHYREGS(0x0934, 0x0930, 0x092c, 0x01bd, 0x01be, 0x01bf),
+  },
+  {	.freq			= 5890,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x88, 0x04, 0x00,
+		   0x20, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x71, 0x00),
+	PHYREGS(0x0938, 0x0934, 0x0930, 0x01bc, 0x01bd, 0x01be),
+  },
+  {	.freq			= 5900,
+	RADIOREGS3(0xd3, 0x00, 0x01, 0x02, 0x4e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x87, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x71, 0x00),
+	PHYREGS(0x093c, 0x0938, 0x0934, 0x01bc, 0x01bc, 0x01bd),
+  },
+  {	.freq			= 5910,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x87, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x71, 0x00),
+	PHYREGS(0x0940, 0x093c, 0x0938, 0x01bb, 0x01bc, 0x01bc),
+  },
+  {	.freq			= 2412,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x6c, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x04, 0x04, 0x04, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x1f, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0b, 0x00, 0x1f, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0b),
+	PHYREGS(0x03c9, 0x03c5, 0x03c1, 0x043a, 0x043f, 0x0443),
+  },
+  {	.freq			= 2417,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x71, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x1f, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0a, 0x00, 0x1f, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0a),
+	PHYREGS(0x03cb, 0x03c7, 0x03c3, 0x0438, 0x043d, 0x0441),
+  },
+  {	.freq			= 2422,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x76, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x0e, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0a, 0x00, 0x0e, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0a),
+	PHYREGS(0x03cd, 0x03c9, 0x03c5, 0x0436, 0x043a, 0x043f),
+  },
+  {	.freq			= 2427,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x7b, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x0d, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x0a, 0x00, 0x0d, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x0a),
+	PHYREGS(0x03cf, 0x03cb, 0x03c7, 0x0434, 0x0438, 0x043d),
+  },
+  {	.freq			= 2432,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x80, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x0c, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x0a, 0x00, 0x0c, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x0a),
+	PHYREGS(0x03d1, 0x03cd, 0x03c9, 0x0431, 0x0436, 0x043a),
+  },
+  {	.freq			= 2437,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x85, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x0b, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x0a, 0x00, 0x0b, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x0a),
+	PHYREGS(0x03d3, 0x03cf, 0x03cb, 0x042f, 0x0434, 0x0438),
+  },
+  {	.freq			= 2442,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8a, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x09, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x0a, 0x00, 0x09, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x0a),
+	PHYREGS(0x03d5, 0x03d1, 0x03cd, 0x042d, 0x0431, 0x0436),
+  },
+  {	.freq			= 2447,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8f, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x08, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x09, 0x00, 0x08, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x09),
+	PHYREGS(0x03d7, 0x03d3, 0x03cf, 0x042b, 0x042f, 0x0434),
+  },
+  {	.freq			= 2452,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x94, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x07, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x09, 0x00, 0x07, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x09),
+	PHYREGS(0x03d9, 0x03d5, 0x03d1, 0x0429, 0x042d, 0x0431),
+  },
+  {	.freq			= 2457,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x99, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x06, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0d, 0x00, 0x09, 0x00, 0x06, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0d, 0x00, 0x09),
+	PHYREGS(0x03db, 0x03d7, 0x03d3, 0x0427, 0x042b, 0x042f),
+  },
+  {	.freq			= 2462,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x9e, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x05, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0d, 0x00, 0x09, 0x00, 0x05, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0d, 0x00, 0x09),
+	PHYREGS(0x03dd, 0x03d9, 0x03d5, 0x0424, 0x0429, 0x042d),
+  },
+  {	.freq			= 2467,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa3, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x04, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0d, 0x00, 0x08, 0x00, 0x04, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0d, 0x00, 0x08),
+	PHYREGS(0x03df, 0x03db, 0x03d7, 0x0422, 0x0427, 0x042b),
+  },
+  {	.freq			= 2472,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa8, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x03, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0d, 0x00, 0x08, 0x00, 0x03, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0d, 0x00, 0x08),
+	PHYREGS(0x03e1, 0x03dd, 0x03d9, 0x0420, 0x0424, 0x0429),
+  },
+  {	.freq			= 2484,
+	RADIOREGS3(0xff, 0x01, 0x03, 0x09, 0xb4, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0d, 0x00, 0x08, 0x00, 0x00, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0d, 0x00, 0x08),
+	PHYREGS(0x03e6, 0x03e2, 0x03de, 0x041b, 0x041f, 0x0424),
+  },
+};
+
+static const struct b43_nphy_channeltab_entry_rev3 b43_nphy_channeltab_rev6[] = {
+  {	.freq			= 4920,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xec, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07b4, 0x07b0, 0x07ac, 0x0214, 0x0215, 0x0216),
+  },
+  {	.freq			= 4930,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xed, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07b8, 0x07b4, 0x07b0, 0x0213, 0x0214, 0x0215),
+  },
+  {	.freq			= 4940,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xee, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07bc, 0x07b8, 0x07b4, 0x0212, 0x0213, 0x0214),
+  },
+  {	.freq			= 4950,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xef, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c0, 0x07bc, 0x07b8, 0x0211, 0x0212, 0x0213),
+  },
+  {	.freq			= 4960,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf0, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c4, 0x07c0, 0x07bc, 0x020f, 0x0211, 0x0212),
+  },
+  {	.freq			= 4970,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf1, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c8, 0x07c4, 0x07c0, 0x020e, 0x020f, 0x0211),
+  },
+  {	.freq			= 4980,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf2, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07cc, 0x07c8, 0x07c4, 0x020d, 0x020e, 0x020f),
+  },
+  {	.freq			= 4990,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf3, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d0, 0x07cc, 0x07c8, 0x020c, 0x020d, 0x020e),
+  },
+  {	.freq			= 5000,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf4, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d4, 0x07d0, 0x07cc, 0x020b, 0x020c, 0x020d),
+  },
+  {	.freq			= 5010,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf5, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d8, 0x07d4, 0x07d0, 0x020a, 0x020b, 0x020c),
+  },
+  {	.freq			= 5020,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf6, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07dc, 0x07d8, 0x07d4, 0x0209, 0x020a, 0x020b),
+  },
+  {	.freq			= 5030,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf7, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e0, 0x07dc, 0x07d8, 0x0208, 0x0209, 0x020a),
+  },
+  {	.freq			= 5040,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf8, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e4, 0x07e0, 0x07dc, 0x0207, 0x0208, 0x0209),
+  },
+  {	.freq			= 5050,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf9, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e8, 0x07e4, 0x07e0, 0x0206, 0x0207, 0x0208),
+  },
+  {	.freq			= 5060,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfa, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07ec, 0x07e8, 0x07e4, 0x0205, 0x0206, 0x0207),
+  },
+  {	.freq			= 5070,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfb, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfd, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f0, 0x07ec, 0x07e8, 0x0204, 0x0205, 0x0206),
+  },
+  {	.freq			= 5080,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfc, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfd, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f4, 0x07f0, 0x07ec, 0x0203, 0x0204, 0x0205),
+  },
+  {	.freq			= 5090,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfd, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfd, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f8, 0x07f4, 0x07f0, 0x0202, 0x0203, 0x0204),
+  },
+  {	.freq			= 5100,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xfe, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x08, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfd, 0x00, 0x08, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07fc, 0x07f8, 0x07f4, 0x0201, 0x0202, 0x0203),
+  },
+  {	.freq			= 5110,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xff, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0800, 0x07fc, 0x07f8, 0x0200, 0x0201, 0x0202),
+  },
+  {	.freq			= 5120,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x00, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0804, 0x0800, 0x07fc, 0x01ff, 0x0200, 0x0201),
+  },
+  {	.freq			= 5130,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x01, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0808, 0x0804, 0x0800, 0x01fe, 0x01ff, 0x0200),
+  },
+  {	.freq			= 5140,
+	RADIOREGS3(0xc6, 0x01, 0x01, 0x02, 0x02, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfb, 0x00, 0x08, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfb, 0x00, 0x08, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x080c, 0x0808, 0x0804, 0x01fd, 0x01fe, 0x01ff),
+  },
+  {	.freq			= 5160,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x04, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x07, 0x00, 0x77, 0x00, 0x0e,
+		   0x00, 0x6f, 0x00, 0xfa, 0x00, 0x07, 0x00, 0x77,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0814, 0x0810, 0x080c, 0x01fb, 0x01fc, 0x01fd),
+  },
+  {	.freq			= 5170,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x05, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x07, 0x00, 0x77, 0x00, 0x0e,
+		   0x00, 0x6f, 0x00, 0xfa, 0x00, 0x07, 0x00, 0x77,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0818, 0x0814, 0x0810, 0x01fa, 0x01fb, 0x01fc),
+  },
+  {	.freq			= 5180,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x06, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xf9, 0x00, 0x06, 0x00, 0x77, 0x00, 0x0e,
+		   0x00, 0x6f, 0x00, 0xf9, 0x00, 0x06, 0x00, 0x77,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x081c, 0x0818, 0x0814, 0x01f9, 0x01fa, 0x01fb),
+  },
+  {	.freq			= 5190,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x07, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xf9, 0x00, 0x06, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xf9, 0x00, 0x06, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0820, 0x081c, 0x0818, 0x01f8, 0x01f9, 0x01fa),
+  },
+  {	.freq			= 5200,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x08, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xf9, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xf9, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0824, 0x0820, 0x081c, 0x01f7, 0x01f8, 0x01f9),
+  },
+  {	.freq			= 5210,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x09, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xf9, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xf9, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0828, 0x0824, 0x0820, 0x01f6, 0x01f7, 0x01f8),
+  },
+  {	.freq			= 5220,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xfe, 0xd8, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xd8, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x082c, 0x0828, 0x0824, 0x01f5, 0x01f6, 0x01f7),
+  },
+  {	.freq			= 5230,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xee, 0xd8, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xd8, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0830, 0x082c, 0x0828, 0x01f4, 0x01f5, 0x01f6),
+  },
+  {	.freq			= 5240,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xee, 0xc8, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xc8, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0834, 0x0830, 0x082c, 0x01f3, 0x01f4, 0x01f5),
+  },
+  {	.freq			= 5250,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xed, 0xc7, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xc7, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0838, 0x0834, 0x0830, 0x01f2, 0x01f3, 0x01f4),
+  },
+  {	.freq			= 5260,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0e, 0x00,
+		   0xed, 0xc7, 0x00, 0x04, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xc7, 0x00, 0x04, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x083c, 0x0838, 0x0834, 0x01f1, 0x01f2, 0x01f3),
+  },
+  {	.freq			= 5270,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8e, 0x0e, 0x00,
+		   0xed, 0xc7, 0x00, 0x04, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xc7, 0x00, 0x04, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0840, 0x083c, 0x0838, 0x01f0, 0x01f1, 0x01f2),
+  },
+  {	.freq			= 5280,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x10, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xb7, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0844, 0x0840, 0x083c, 0x01f0, 0x01f0, 0x01f1),
+  },
+  {	.freq			= 5290,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x11, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xb7, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0848, 0x0844, 0x0840, 0x01ef, 0x01f0, 0x01f0),
+  },
+  {	.freq			= 5300,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x12, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xb7, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x084c, 0x0848, 0x0844, 0x01ee, 0x01ef, 0x01f0),
+  },
+  {	.freq			= 5310,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x13, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xb7, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0850, 0x084c, 0x0848, 0x01ed, 0x01ee, 0x01ef),
+  },
+  {	.freq			= 5320,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x14, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdb, 0xb7, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0854, 0x0850, 0x084c, 0x01ec, 0x01ed, 0x01ee),
+  },
+  {	.freq			= 5330,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x15, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xcb, 0xa6, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0b,
+		   0x00, 0x6f, 0x00, 0xa6, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0858, 0x0854, 0x0850, 0x01eb, 0x01ec, 0x01ed),
+  },
+  {	.freq			= 5340,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x16, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xca, 0xa6, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0b,
+		   0x00, 0x6f, 0x00, 0xa6, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x085c, 0x0858, 0x0854, 0x01ea, 0x01eb, 0x01ec),
+  },
+  {	.freq			= 5350,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x17, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0d, 0x00,
+		   0xca, 0xa6, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0b,
+		   0x00, 0x6f, 0x00, 0xa6, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0860, 0x085c, 0x0858, 0x01e9, 0x01ea, 0x01eb),
+  },
+  {	.freq			= 5360,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x18, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0d, 0x00,
+		   0xc9, 0x95, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x95, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0864, 0x0860, 0x085c, 0x01e8, 0x01e9, 0x01ea),
+  },
+  {	.freq			= 5370,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x19, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0d, 0x00,
+		   0xc9, 0x95, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x95, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0868, 0x0864, 0x0860, 0x01e7, 0x01e8, 0x01e9),
+  },
+  {	.freq			= 5380,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb8, 0x95, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x95, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x086c, 0x0868, 0x0864, 0x01e6, 0x01e7, 0x01e8),
+  },
+  {	.freq			= 5390,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb8, 0x84, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0870, 0x086c, 0x0868, 0x01e5, 0x01e6, 0x01e7),
+  },
+  {	.freq			= 5400,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb8, 0x84, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0874, 0x0870, 0x086c, 0x01e5, 0x01e5, 0x01e6),
+  },
+  {	.freq			= 5410,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb7, 0x84, 0x00, 0x02, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x02, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0878, 0x0874, 0x0870, 0x01e4, 0x01e5, 0x01e5),
+  },
+  {	.freq			= 5420,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xa7, 0x84, 0x00, 0x02, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x02, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x087c, 0x0878, 0x0874, 0x01e3, 0x01e4, 0x01e5),
+  },
+  {	.freq			= 5430,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0b, 0x00,
+		   0xa6, 0x84, 0x00, 0x02, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x02, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0880, 0x087c, 0x0878, 0x01e2, 0x01e3, 0x01e4),
+  },
+  {	.freq			= 5440,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x20, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0xa6, 0x84, 0x00, 0x02, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x02, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0884, 0x0880, 0x087c, 0x01e1, 0x01e2, 0x01e3),
+  },
+  {	.freq			= 5450,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x21, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0x95, 0x84, 0x00, 0x01, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x01, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0888, 0x0884, 0x0880, 0x01e0, 0x01e1, 0x01e2),
+  },
+  {	.freq			= 5460,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x22, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0x95, 0x84, 0x00, 0x01, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x01, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x088c, 0x0888, 0x0884, 0x01df, 0x01e0, 0x01e1),
+  },
+  {	.freq			= 5470,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x23, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0x94, 0x73, 0x00, 0x01, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x01, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0890, 0x088c, 0x0888, 0x01de, 0x01df, 0x01e0),
+  },
+  {	.freq			= 5480,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x24, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x84, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0894, 0x0890, 0x088c, 0x01dd, 0x01de, 0x01df),
+  },
+  {	.freq			= 5490,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x25, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x83, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0898, 0x0894, 0x0890, 0x01dd, 0x01dd, 0x01de),
+  },
+  {	.freq			= 5500,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x26, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x82, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x089c, 0x0898, 0x0894, 0x01dc, 0x01dd, 0x01dd),
+  },
+  {	.freq			= 5510,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x27, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x82, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08a0, 0x089c, 0x0898, 0x01db, 0x01dc, 0x01dd),
+  },
+  {	.freq			= 5520,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x28, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x72, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08a4, 0x08a0, 0x089c, 0x01da, 0x01db, 0x01dc),
+  },
+  {	.freq			= 5530,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x29, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x09, 0x00,
+		   0x72, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08a8, 0x08a4, 0x08a0, 0x01d9, 0x01da, 0x01db),
+  },
+  {	.freq			= 5540,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x09, 0x00,
+		   0x71, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08ac, 0x08a8, 0x08a4, 0x01d8, 0x01d9, 0x01da),
+  },
+  {	.freq			= 5550,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x09, 0x00,
+		   0x61, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08b0, 0x08ac, 0x08a8, 0x01d7, 0x01d8, 0x01d9),
+  },
+  {	.freq			= 5560,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x09, 0x00,
+		   0x61, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08b4, 0x08b0, 0x08ac, 0x01d7, 0x01d7, 0x01d8),
+  },
+  {	.freq			= 5570,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x09, 0x00,
+		   0x61, 0x62, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x62, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08b8, 0x08b4, 0x08b0, 0x01d6, 0x01d7, 0x01d7),
+  },
+  {	.freq			= 5580,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x08, 0x00,
+		   0x60, 0x62, 0x00, 0x00, 0x00, 0x77, 0x00, 0x08,
+		   0x00, 0x6f, 0x00, 0x62, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x08, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08bc, 0x08b8, 0x08b4, 0x01d5, 0x01d6, 0x01d7),
+  },
+  {	.freq			= 5590,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x08, 0x00,
+		   0x50, 0x61, 0x00, 0x00, 0x00, 0x77, 0x00, 0x08,
+		   0x00, 0x6f, 0x00, 0x61, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x08, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08c0, 0x08bc, 0x08b8, 0x01d4, 0x01d5, 0x01d6),
+  },
+  {	.freq			= 5600,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x30, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x89, 0x08, 0x00,
+		   0x50, 0x51, 0x00, 0x00, 0x00, 0x77, 0x00, 0x08,
+		   0x00, 0x6f, 0x00, 0x51, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x08, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08c4, 0x08c0, 0x08bc, 0x01d3, 0x01d4, 0x01d5),
+  },
+  {	.freq			= 5610,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x31, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x89, 0x08, 0x00,
+		   0x50, 0x51, 0x00, 0x00, 0x00, 0x77, 0x00, 0x08,
+		   0x00, 0x6f, 0x00, 0x51, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x08, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08c8, 0x08c4, 0x08c0, 0x01d2, 0x01d3, 0x01d4),
+  },
+  {	.freq			= 5620,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x32, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x89, 0x08, 0x00,
+		   0x50, 0x50, 0x00, 0x00, 0x00, 0x77, 0x00, 0x07,
+		   0x00, 0x6f, 0x00, 0x50, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x07, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08cc, 0x08c8, 0x08c4, 0x01d2, 0x01d2, 0x01d3),
+  },
+  {	.freq			= 5630,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x33, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x50, 0x50, 0x00, 0x00, 0x00, 0x77, 0x00, 0x07,
+		   0x00, 0x6f, 0x00, 0x50, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x07, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08d0, 0x08cc, 0x08c8, 0x01d1, 0x01d2, 0x01d2),
+  },
+  {	.freq			= 5640,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x34, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x50, 0x00, 0x00, 0x00, 0x77, 0x00, 0x07,
+		   0x00, 0x6f, 0x00, 0x50, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x07, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08d4, 0x08d0, 0x08cc, 0x01d0, 0x01d1, 0x01d2),
+  },
+  {	.freq			= 5650,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x35, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x40, 0x00, 0x00, 0x00, 0x77, 0x00, 0x07,
+		   0x00, 0x6f, 0x00, 0x40, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x07, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08d8, 0x08d4, 0x08d0, 0x01cf, 0x01d0, 0x01d1),
+  },
+  {	.freq			= 5660,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x36, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x40, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6f, 0x00, 0x40, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08dc, 0x08d8, 0x08d4, 0x01ce, 0x01cf, 0x01d0),
+  },
+  {	.freq			= 5670,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x37, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6f, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08e0, 0x08dc, 0x08d8, 0x01ce, 0x01ce, 0x01cf),
+  },
+  {	.freq			= 5680,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x38, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6f, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08e4, 0x08e0, 0x08dc, 0x01cd, 0x01ce, 0x01ce),
+  },
+  {	.freq			= 5690,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x39, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6f, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08e8, 0x08e4, 0x08e0, 0x01cc, 0x01cd, 0x01ce),
+  },
+  {	.freq			= 5700,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6e, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6e, 0x00),
+	PHYREGS(0x08ec, 0x08e8, 0x08e4, 0x01cb, 0x01cc, 0x01cd),
+  },
+  {	.freq			= 5710,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6e, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6e, 0x00),
+	PHYREGS(0x08f0, 0x08ec, 0x08e8, 0x01ca, 0x01cb, 0x01cc),
+  },
+  {	.freq			= 5720,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6e, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6e, 0x00),
+	PHYREGS(0x08f4, 0x08f0, 0x08ec, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5725,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x79, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6e, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6e, 0x00),
+	PHYREGS(0x08f6, 0x08f2, 0x08ee, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5730,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6e, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6e, 0x00),
+	PHYREGS(0x08f8, 0x08f4, 0x08f0, 0x01c9, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5735,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x7b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6d, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6d, 0x00),
+	PHYREGS(0x08fa, 0x08f6, 0x08f2, 0x01c8, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5740,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6d, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6d, 0x00),
+	PHYREGS(0x08fc, 0x08f8, 0x08f4, 0x01c8, 0x01c9, 0x01c9),
+  },
+  {	.freq			= 5745,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6d, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6d, 0x00),
+	PHYREGS(0x08fe, 0x08fa, 0x08f6, 0x01c8, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5750,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x20, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6d, 0x00, 0x20, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6d, 0x00),
+	PHYREGS(0x0900, 0x08fc, 0x08f8, 0x01c7, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5755,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7f, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x10, 0x20, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6c, 0x00, 0x20, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0902, 0x08fe, 0x08fa, 0x01c7, 0x01c8, 0x01c8),
+  },
+  {	.freq			= 5760,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x40, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x86, 0x05, 0x00,
+		   0x10, 0x20, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6c, 0x00, 0x20, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0904, 0x0900, 0x08fc, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5765,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x81, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x86, 0x05, 0x00,
+		   0x10, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6c, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0906, 0x0902, 0x08fe, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5770,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x41, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x86, 0x04, 0x00,
+		   0x10, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0908, 0x0904, 0x0900, 0x01c6, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5775,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x83, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x86, 0x04, 0x00,
+		   0x10, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x090a, 0x0906, 0x0902, 0x01c5, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5780,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x42, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x86, 0x04, 0x00,
+		   0x10, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x090c, 0x0908, 0x0904, 0x01c5, 0x01c6, 0x01c6),
+  },
+  {	.freq			= 5785,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x85, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x090e, 0x090a, 0x0906, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5790,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x43, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0910, 0x090c, 0x0908, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5795,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x87, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0912, 0x090e, 0x090a, 0x01c4, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5800,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x44, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0914, 0x0910, 0x090c, 0x01c3, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5805,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x89, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6a, 0x00),
+	PHYREGS(0x0916, 0x0912, 0x090e, 0x01c3, 0x01c4, 0x01c4),
+  },
+  {	.freq			= 5810,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x45, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6a, 0x00),
+	PHYREGS(0x0918, 0x0914, 0x0910, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5815,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6a, 0x00),
+	PHYREGS(0x091a, 0x0916, 0x0912, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5820,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x46, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6a, 0x00),
+	PHYREGS(0x091c, 0x0918, 0x0914, 0x01c2, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5825,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x69, 0x00),
+	PHYREGS(0x091e, 0x091a, 0x0916, 0x01c1, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5830,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x47, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x69, 0x00),
+	PHYREGS(0x0920, 0x091c, 0x0918, 0x01c1, 0x01c2, 0x01c2),
+  },
+  {	.freq			= 5840,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x48, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x69, 0x00),
+	PHYREGS(0x0924, 0x0920, 0x091c, 0x01c0, 0x01c1, 0x01c2),
+  },
+  {	.freq			= 5850,
+	RADIOREGS3(0xe0, 0x00, 0x01, 0x02, 0x49, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x69, 0x00),
+	PHYREGS(0x0928, 0x0924, 0x0920, 0x01bf, 0x01c0, 0x01c1),
+  },
+  {	.freq			= 5860,
+	RADIOREGS3(0xde, 0x00, 0x01, 0x02, 0x4a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x69, 0x00),
+	PHYREGS(0x092c, 0x0928, 0x0924, 0x01bf, 0x01bf, 0x01c0),
+  },
+  {	.freq			= 5870,
+	RADIOREGS3(0xdb, 0x00, 0x01, 0x02, 0x4b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x68, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x0930, 0x092c, 0x0928, 0x01be, 0x01bf, 0x01bf),
+  },
+  {	.freq			= 5880,
+	RADIOREGS3(0xd8, 0x00, 0x01, 0x02, 0x4c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x68, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x0934, 0x0930, 0x092c, 0x01bd, 0x01be, 0x01bf),
+  },
+  {	.freq			= 5890,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x68, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x0938, 0x0934, 0x0930, 0x01bc, 0x01bd, 0x01be),
+  },
+  {	.freq			= 5900,
+	RADIOREGS3(0xd3, 0x00, 0x01, 0x02, 0x4e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x68, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x093c, 0x0938, 0x0934, 0x01bc, 0x01bc, 0x01bd),
+  },
+  {	.freq			= 5910,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x68, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x0940, 0x093c, 0x0938, 0x01bb, 0x01bc, 0x01bc),
+  },
+  {	.freq			= 2412,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x6c, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x04, 0x04, 0x04, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x78, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0b, 0x00, 0x0a, 0x00, 0x78, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0b, 0x00, 0x0a),
+	PHYREGS(0x03c9, 0x03c5, 0x03c1, 0x043a, 0x043f, 0x0443),
+  },
+  {	.freq			= 2417,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x71, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x78, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0b, 0x00, 0x0a, 0x00, 0x78, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0b, 0x00, 0x0a),
+	PHYREGS(0x03cb, 0x03c7, 0x03c3, 0x0438, 0x043d, 0x0441),
+  },
+  {	.freq			= 2422,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x76, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x67, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0b, 0x00, 0x0a, 0x00, 0x67, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0b, 0x00, 0x0a),
+	PHYREGS(0x03cd, 0x03c9, 0x03c5, 0x0436, 0x043a, 0x043f),
+  },
+  {	.freq			= 2427,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x7b, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x57, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x0a, 0x00, 0x57, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x0a),
+	PHYREGS(0x03cf, 0x03cb, 0x03c7, 0x0434, 0x0438, 0x043d),
+  },
+  {	.freq			= 2432,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x80, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x56, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x0a, 0x00, 0x56, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x0a),
+	PHYREGS(0x03d1, 0x03cd, 0x03c9, 0x0431, 0x0436, 0x043a),
+  },
+  {	.freq			= 2437,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x85, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x46, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x0a, 0x00, 0x46, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x0a),
+	PHYREGS(0x03d3, 0x03cf, 0x03cb, 0x042f, 0x0434, 0x0438),
+  },
+  {	.freq			= 2442,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8a, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x45, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x0a, 0x00, 0x45, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x0a),
+	PHYREGS(0x03d5, 0x03d1, 0x03cd, 0x042d, 0x0431, 0x0436),
+  },
+  {	.freq			= 2447,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8f, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x34, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x09, 0x00, 0x34, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x09),
+	PHYREGS(0x03d7, 0x03d3, 0x03cf, 0x042b, 0x042f, 0x0434),
+  },
+  {	.freq			= 2452,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x94, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x23, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x09, 0x00, 0x23, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x09),
+	PHYREGS(0x03d9, 0x03d5, 0x03d1, 0x0429, 0x042d, 0x0431),
+  },
+  {	.freq			= 2457,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x99, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x12, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x09, 0x00, 0x12, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x09),
+	PHYREGS(0x03db, 0x03d7, 0x03d3, 0x0427, 0x042b, 0x042f),
+  },
+  {	.freq			= 2462,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x9e, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x09, 0x00, 0x09, 0x00, 0x02, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x09, 0x00, 0x09),
+	PHYREGS(0x03dd, 0x03d9, 0x03d5, 0x0424, 0x0429, 0x042d),
+  },
+  {	.freq			= 2467,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa3, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x09, 0x00, 0x09, 0x00, 0x01, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x09, 0x00, 0x09),
+	PHYREGS(0x03df, 0x03db, 0x03d7, 0x0422, 0x0427, 0x042b),
+  },
+  {	.freq			= 2472,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa8, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x09, 0x00, 0x09, 0x00, 0x01, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x09, 0x00, 0x09),
+	PHYREGS(0x03e1, 0x03dd, 0x03d9, 0x0420, 0x0424, 0x0429),
+  },
+  {	.freq			= 2484,
+	RADIOREGS3(0xff, 0x01, 0x03, 0x09, 0xb4, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x20, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x09, 0x00, 0x09, 0x00, 0x00, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x09, 0x00, 0x09),
+	PHYREGS(0x03e6, 0x03e2, 0x03de, 0x041b, 0x041f, 0x0424),
+  },
+};
+
+static const struct b43_nphy_channeltab_entry_rev3 b43_nphy_channeltab_rev7_9[] = {
+  {	.freq			= 4920,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xec, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0b, 0x00, 0x70, 0x00, 0x0f,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0b, 0x00, 0x70,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07b4, 0x07b0, 0x07ac, 0x0214, 0x0215, 0x0216),
+  },
+  {	.freq			= 4930,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xed, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0b, 0x00, 0x70, 0x00, 0x0e,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0b, 0x00, 0x70,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07b8, 0x07b4, 0x07b0, 0x0213, 0x0214, 0x0215),
+  },
+  {	.freq			= 4940,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xee, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0b, 0x00, 0x70, 0x00, 0x0e,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0b, 0x00, 0x70,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07bc, 0x07b8, 0x07b4, 0x0212, 0x0213, 0x0214),
+  },
+  {	.freq			= 4950,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xef, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0b, 0x00, 0x70, 0x00, 0x0e,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0b, 0x00, 0x70,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c0, 0x07bc, 0x07b8, 0x0211, 0x0212, 0x0213),
+  },
+  {	.freq			= 4960,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf0, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0e,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c4, 0x07c0, 0x07bc, 0x020f, 0x0211, 0x0212),
+  },
+  {	.freq			= 4970,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf1, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c8, 0x07c4, 0x07c0, 0x020e, 0x020f, 0x0211),
+  },
+  {	.freq			= 4980,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf2, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07cc, 0x07c8, 0x07c4, 0x020d, 0x020e, 0x020f),
+  },
+  {	.freq			= 4990,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf3, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d0, 0x07cc, 0x07c8, 0x020c, 0x020d, 0x020e),
+  },
+  {	.freq			= 5000,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf4, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d4, 0x07d0, 0x07cc, 0x020b, 0x020c, 0x020d),
+  },
+  {	.freq			= 5010,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf5, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x0a, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x0a, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d8, 0x07d4, 0x07d0, 0x020a, 0x020b, 0x020c),
+  },
+  {	.freq			= 5020,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf6, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x09, 0x00, 0x70, 0x00, 0x0d,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x09, 0x00, 0x70,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07dc, 0x07d8, 0x07d4, 0x0209, 0x020a, 0x020b),
+  },
+  {	.freq			= 5030,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf7, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xff, 0x00, 0x09, 0x00, 0x70, 0x00, 0x0c,
+		   0x00, 0x9f, 0x00, 0xff, 0x00, 0x09, 0x00, 0x70,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e0, 0x07dc, 0x07d8, 0x0208, 0x0209, 0x020a),
+  },
+  {	.freq			= 5040,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf8, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x70, 0x00, 0x0c,
+		   0x00, 0x9f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x70,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e4, 0x07e0, 0x07dc, 0x0207, 0x0208, 0x0209),
+  },
+  {	.freq			= 5050,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf9, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x70, 0x00, 0x0c,
+		   0x00, 0x9f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x70,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e8, 0x07e4, 0x07e0, 0x0206, 0x0207, 0x0208),
+  },
+  {	.freq			= 5060,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfa, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x09, 0x00, 0x70, 0x00, 0x0c,
+		   0x00, 0x9f, 0x00, 0xfd, 0x00, 0x09, 0x00, 0x70,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07ec, 0x07e8, 0x07e4, 0x0205, 0x0206, 0x0207),
+  },
+  {	.freq			= 5070,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfb, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfd, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f0, 0x07ec, 0x07e8, 0x0204, 0x0205, 0x0206),
+  },
+  {	.freq			= 5080,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfc, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f4, 0x07f0, 0x07ec, 0x0203, 0x0204, 0x0205),
+  },
+  {	.freq			= 5090,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfd, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f8, 0x07f4, 0x07f0, 0x0202, 0x0203, 0x0204),
+  },
+  {	.freq			= 5100,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xfe, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07fc, 0x07f8, 0x07f4, 0x0201, 0x0202, 0x0203),
+  },
+  {	.freq			= 5110,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xff, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0800, 0x07fc, 0x07f8, 0x0200, 0x0201, 0x0202),
+  },
+  {	.freq			= 5120,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x00, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0b,
+		   0x00, 0x9f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0804, 0x0800, 0x07fc, 0x01ff, 0x0200, 0x0201),
+  },
+  {	.freq			= 5130,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x01, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfb, 0x00, 0x08, 0x00, 0x70, 0x00, 0x0a,
+		   0x00, 0x9f, 0x00, 0xfb, 0x00, 0x08, 0x00, 0x70,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0808, 0x0804, 0x0800, 0x01fe, 0x01ff, 0x0200),
+  },
+  {	.freq			= 5140,
+	RADIOREGS3(0xc6, 0x01, 0x01, 0x02, 0x02, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfb, 0x00, 0x07, 0x00, 0x70, 0x00, 0x0a,
+		   0x00, 0x9f, 0x00, 0xfb, 0x00, 0x07, 0x00, 0x70,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x080c, 0x0808, 0x0804, 0x01fd, 0x01fe, 0x01ff),
+  },
+  {	.freq			= 5160,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x04, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfb, 0x00, 0x07, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfb, 0x00, 0x07, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0814, 0x0810, 0x080c, 0x01fb, 0x01fc, 0x01fd),
+  },
+  {	.freq			= 5170,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x05, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfb, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfb, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0818, 0x0814, 0x0810, 0x01fa, 0x01fb, 0x01fc),
+  },
+  {	.freq			= 5180,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x06, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfa, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x081c, 0x0818, 0x0814, 0x01f9, 0x01fa, 0x01fb),
+  },
+  {	.freq			= 5190,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x07, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfa, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0820, 0x081c, 0x0818, 0x01f8, 0x01f9, 0x01fa),
+  },
+  {	.freq			= 5200,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x08, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfa, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0824, 0x0820, 0x081c, 0x01f7, 0x01f8, 0x01f9),
+  },
+  {	.freq			= 5210,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x09, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfa, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0828, 0x0824, 0x0820, 0x01f6, 0x01f7, 0x01f8),
+  },
+  {	.freq			= 5220,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xfe, 0xfa, 0x00, 0x06, 0x00, 0x70, 0x00, 0x09,
+		   0x00, 0x9e, 0x00, 0xfa, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x09, 0x00, 0x6e, 0x00),
+	PHYREGS(0x082c, 0x0828, 0x0824, 0x01f5, 0x01f6, 0x01f7),
+  },
+  {	.freq			= 5230,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xee, 0xea, 0x00, 0x06, 0x00, 0x70, 0x00, 0x08,
+		   0x00, 0x9e, 0x00, 0xea, 0x00, 0x06, 0x00, 0x70,
+		   0x00, 0x08, 0x00, 0x6e, 0x00),
+	PHYREGS(0x0830, 0x082c, 0x0828, 0x01f4, 0x01f5, 0x01f6),
+  },
+  {	.freq			= 5240,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xee, 0xe9, 0x00, 0x05, 0x00, 0x70, 0x00, 0x08,
+		   0x00, 0x9d, 0x00, 0xe9, 0x00, 0x05, 0x00, 0x70,
+		   0x00, 0x08, 0x00, 0x6d, 0x00),
+	PHYREGS(0x0834, 0x0830, 0x082c, 0x01f3, 0x01f4, 0x01f5),
+  },
+  {	.freq			= 5250,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xed, 0xe9, 0x00, 0x05, 0x00, 0x70, 0x00, 0x08,
+		   0x00, 0x9d, 0x00, 0xe9, 0x00, 0x05, 0x00, 0x70,
+		   0x00, 0x08, 0x00, 0x6d, 0x00),
+	PHYREGS(0x0838, 0x0834, 0x0830, 0x01f2, 0x01f3, 0x01f4),
+  },
+  {	.freq			= 5260,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0e, 0x00,
+		   0xed, 0xd9, 0x00, 0x05, 0x00, 0x70, 0x00, 0x08,
+		   0x00, 0x9d, 0x00, 0xd9, 0x00, 0x05, 0x00, 0x70,
+		   0x00, 0x08, 0x00, 0x6d, 0x00),
+	PHYREGS(0x083c, 0x0838, 0x0834, 0x01f1, 0x01f2, 0x01f3),
+  },
+  {	.freq			= 5270,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8e, 0x0e, 0x00,
+		   0xed, 0xd8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xd8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0840, 0x083c, 0x0838, 0x01f0, 0x01f1, 0x01f2),
+  },
+  {	.freq			= 5280,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x10, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xc8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xc8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0844, 0x0840, 0x083c, 0x01f0, 0x01f0, 0x01f1),
+  },
+  {	.freq			= 5290,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x11, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xc8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xc8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0848, 0x0844, 0x0840, 0x01ef, 0x01f0, 0x01f0),
+  },
+  {	.freq			= 5300,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x12, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xc8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xc8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x084c, 0x0848, 0x0844, 0x01ee, 0x01ef, 0x01f0),
+  },
+  {	.freq			= 5310,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x13, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xc8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xc8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0850, 0x084c, 0x0848, 0x01ed, 0x01ee, 0x01ef),
+  },
+  {	.freq			= 5320,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x14, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdb, 0xb8, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9c, 0x00, 0xb8, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0854, 0x0850, 0x084c, 0x01ec, 0x01ed, 0x01ee),
+  },
+  {	.freq			= 5330,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x15, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xcb, 0xb7, 0x00, 0x04, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9b, 0x00, 0xb7, 0x00, 0x04, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0858, 0x0854, 0x0850, 0x01eb, 0x01ec, 0x01ed),
+  },
+  {	.freq			= 5340,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x16, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xca, 0xb7, 0x00, 0x03, 0x00, 0x70, 0x00, 0x07,
+		   0x00, 0x9b, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x07, 0x00, 0x6b, 0x00),
+	PHYREGS(0x085c, 0x0858, 0x0854, 0x01ea, 0x01eb, 0x01ec),
+  },
+  {	.freq			= 5350,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x17, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0d, 0x00,
+		   0xca, 0xa7, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9b, 0x00, 0xa7, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0860, 0x085c, 0x0858, 0x01e9, 0x01ea, 0x01eb),
+  },
+  {	.freq			= 5360,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x18, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0d, 0x00,
+		   0xc9, 0xa6, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9b, 0x00, 0xa6, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0864, 0x0860, 0x085c, 0x01e8, 0x01e9, 0x01ea),
+  },
+  {	.freq			= 5370,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x19, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0d, 0x00,
+		   0xc9, 0xa6, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9b, 0x00, 0xa6, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x7b, 0x00),
+	PHYREGS(0x0868, 0x0864, 0x0860, 0x01e7, 0x01e8, 0x01e9),
+  },
+  {	.freq			= 5380,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb8, 0x96, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9a, 0x00, 0x96, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x7a, 0x00),
+	PHYREGS(0x086c, 0x0868, 0x0864, 0x01e6, 0x01e7, 0x01e8),
+  },
+  {	.freq			= 5390,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb8, 0x95, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9a, 0x00, 0x95, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x7a, 0x00),
+	PHYREGS(0x0870, 0x086c, 0x0868, 0x01e5, 0x01e6, 0x01e7),
+  },
+  {	.freq			= 5400,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb8, 0x95, 0x00, 0x03, 0x00, 0x70, 0x00, 0x06,
+		   0x00, 0x9a, 0x00, 0x95, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x06, 0x00, 0x7a, 0x00),
+	PHYREGS(0x0874, 0x0870, 0x086c, 0x01e5, 0x01e5, 0x01e6),
+  },
+  {	.freq			= 5410,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb7, 0x95, 0x00, 0x03, 0x00, 0x70, 0x00, 0x05,
+		   0x00, 0x9a, 0x00, 0x95, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x05, 0x00, 0x7a, 0x00),
+	PHYREGS(0x0878, 0x0874, 0x0870, 0x01e4, 0x01e5, 0x01e5),
+  },
+  {	.freq			= 5420,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xa7, 0x95, 0x00, 0x03, 0x00, 0x70, 0x00, 0x05,
+		   0x00, 0x9a, 0x00, 0x95, 0x00, 0x03, 0x00, 0x70,
+		   0x00, 0x05, 0x00, 0x7a, 0x00),
+	PHYREGS(0x087c, 0x0878, 0x0874, 0x01e3, 0x01e4, 0x01e5),
+  },
+  {	.freq			= 5430,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0b, 0x00,
+		   0xa6, 0x85, 0x00, 0x02, 0x00, 0x70, 0x00, 0x05,
+		   0x00, 0x99, 0x00, 0x85, 0x00, 0x02, 0x00, 0x70,
+		   0x00, 0x05, 0x00, 0x79, 0x00),
+	PHYREGS(0x0880, 0x087c, 0x0878, 0x01e2, 0x01e3, 0x01e4),
+  },
+  {	.freq			= 5440,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x20, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0xa6, 0x84, 0x00, 0x02, 0x00, 0x70, 0x00, 0x05,
+		   0x00, 0x99, 0x00, 0x84, 0x00, 0x02, 0x00, 0x70,
+		   0x00, 0x05, 0x00, 0x79, 0x00),
+	PHYREGS(0x0884, 0x0880, 0x087c, 0x01e1, 0x01e2, 0x01e3),
+  },
+  {	.freq			= 5450,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x21, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0x95, 0x84, 0x00, 0x02, 0x00, 0x70, 0x00, 0x05,
+		   0x00, 0x99, 0x00, 0x84, 0x00, 0x02, 0x00, 0x70,
+		   0x00, 0x05, 0x00, 0x79, 0x00),
+	PHYREGS(0x0888, 0x0884, 0x0880, 0x01e0, 0x01e1, 0x01e2),
+  },
+  {	.freq			= 5460,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x22, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0x95, 0x84, 0x00, 0x02, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x99, 0x00, 0x84, 0x00, 0x02, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x79, 0x00),
+	PHYREGS(0x088c, 0x0888, 0x0884, 0x01df, 0x01e0, 0x01e1),
+  },
+  {	.freq			= 5470,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x23, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0x94, 0x74, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x99, 0x00, 0x74, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x79, 0x00),
+	PHYREGS(0x0890, 0x088c, 0x0888, 0x01de, 0x01df, 0x01e0),
+  },
+  {	.freq			= 5480,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x24, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x84, 0x73, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x98, 0x00, 0x73, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x78, 0x00),
+	PHYREGS(0x0894, 0x0890, 0x088c, 0x01dd, 0x01de, 0x01df),
+  },
+  {	.freq			= 5490,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x25, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x83, 0x73, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x98, 0x00, 0x73, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x78, 0x00),
+	PHYREGS(0x0898, 0x0894, 0x0890, 0x01dd, 0x01dd, 0x01de),
+  },
+  {	.freq			= 5500,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x26, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x82, 0x73, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x98, 0x00, 0x73, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x78, 0x00),
+	PHYREGS(0x089c, 0x0898, 0x0894, 0x01dc, 0x01dd, 0x01dd),
+  },
+  {	.freq			= 5510,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x27, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x82, 0x73, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x98, 0x00, 0x73, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x78, 0x00),
+	PHYREGS(0x08a0, 0x089c, 0x0898, 0x01db, 0x01dc, 0x01dd),
+  },
+  {	.freq			= 5520,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x28, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x72, 0x73, 0x00, 0x01, 0x00, 0x70, 0x00, 0x04,
+		   0x00, 0x98, 0x00, 0x73, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x04, 0x00, 0x78, 0x00),
+	PHYREGS(0x08a4, 0x08a0, 0x089c, 0x01da, 0x01db, 0x01dc),
+  },
+  {	.freq			= 5530,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x29, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x09, 0x00,
+		   0x72, 0x63, 0x00, 0x01, 0x00, 0x70, 0x00, 0x03,
+		   0x00, 0x98, 0x00, 0x63, 0x00, 0x01, 0x00, 0x70,
+		   0x00, 0x03, 0x00, 0x78, 0x00),
+	PHYREGS(0x08a8, 0x08a4, 0x08a0, 0x01d9, 0x01da, 0x01db),
+  },
+  {	.freq			= 5540,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x09, 0x00,
+		   0x71, 0x62, 0x00, 0x00, 0x00, 0x70, 0x00, 0x03,
+		   0x00, 0x97, 0x00, 0x62, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x03, 0x00, 0x77, 0x00),
+	PHYREGS(0x08ac, 0x08a8, 0x08a4, 0x01d8, 0x01d9, 0x01da),
+  },
+  {	.freq			= 5550,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x09, 0x00,
+		   0x61, 0x62, 0x00, 0x00, 0x00, 0x70, 0x00, 0x03,
+		   0x00, 0x97, 0x00, 0x62, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x03, 0x00, 0x77, 0x00),
+	PHYREGS(0x08b0, 0x08ac, 0x08a8, 0x01d7, 0x01d8, 0x01d9),
+  },
+  {	.freq			= 5560,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x09, 0x00,
+		   0x61, 0x62, 0x00, 0x00, 0x00, 0x70, 0x00, 0x03,
+		   0x00, 0x97, 0x00, 0x62, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x03, 0x00, 0x77, 0x00),
+	PHYREGS(0x08b4, 0x08b0, 0x08ac, 0x01d7, 0x01d7, 0x01d8),
+  },
+  {	.freq			= 5570,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x09, 0x00,
+		   0x61, 0x52, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x52, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x76, 0x00),
+	PHYREGS(0x08b8, 0x08b4, 0x08b0, 0x01d6, 0x01d7, 0x01d7),
+  },
+  {	.freq			= 5580,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x08, 0x00,
+		   0x60, 0x52, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x52, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x86, 0x00),
+	PHYREGS(0x08bc, 0x08b8, 0x08b4, 0x01d5, 0x01d6, 0x01d7),
+  },
+  {	.freq			= 5590,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x08, 0x00,
+		   0x50, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x86, 0x00),
+	PHYREGS(0x08c0, 0x08bc, 0x08b8, 0x01d4, 0x01d5, 0x01d6),
+  },
+  {	.freq			= 5600,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x30, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x89, 0x08, 0x00,
+		   0x50, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x86, 0x00),
+	PHYREGS(0x08c4, 0x08c0, 0x08bc, 0x01d3, 0x01d4, 0x01d5),
+  },
+  {	.freq			= 5610,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x31, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x89, 0x08, 0x00,
+		   0x50, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x86, 0x00),
+	PHYREGS(0x08c8, 0x08c4, 0x08c0, 0x01d2, 0x01d3, 0x01d4),
+  },
+  {	.freq			= 5620,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x32, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x89, 0x08, 0x00,
+		   0x50, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x86, 0x00),
+	PHYREGS(0x08cc, 0x08c8, 0x08c4, 0x01d2, 0x01d2, 0x01d3),
+  },
+  {	.freq			= 5630,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x33, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x50, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x96, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x86, 0x00),
+	PHYREGS(0x08d0, 0x08cc, 0x08c8, 0x01d1, 0x01d2, 0x01d2),
+  },
+  {	.freq			= 5640,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x34, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x51, 0x00, 0x00, 0x00, 0x70, 0x00, 0x02,
+		   0x00, 0x95, 0x00, 0x51, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x02, 0x00, 0x85, 0x00),
+	PHYREGS(0x08d4, 0x08d0, 0x08cc, 0x01d0, 0x01d1, 0x01d2),
+  },
+  {	.freq			= 5650,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x35, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x50, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x95, 0x00, 0x50, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x85, 0x00),
+	PHYREGS(0x08d8, 0x08d4, 0x08d0, 0x01cf, 0x01d0, 0x01d1),
+  },
+  {	.freq			= 5660,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x36, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x50, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x95, 0x00, 0x50, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x85, 0x00),
+	PHYREGS(0x08dc, 0x08d8, 0x08d4, 0x01ce, 0x01cf, 0x01d0),
+  },
+  {	.freq			= 5670,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x37, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x84, 0x00),
+	PHYREGS(0x08e0, 0x08dc, 0x08d8, 0x01ce, 0x01ce, 0x01cf),
+  },
+  {	.freq			= 5680,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x38, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x84, 0x00),
+	PHYREGS(0x08e4, 0x08e0, 0x08dc, 0x01cd, 0x01ce, 0x01ce),
+  },
+  {	.freq			= 5690,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x39, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x94, 0x00),
+	PHYREGS(0x08e8, 0x08e4, 0x08e0, 0x01cc, 0x01cd, 0x01ce),
+  },
+  {	.freq			= 5700,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x94, 0x00),
+	PHYREGS(0x08ec, 0x08e8, 0x08e4, 0x01cb, 0x01cc, 0x01cd),
+  },
+  {	.freq			= 5710,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x94, 0x00),
+	PHYREGS(0x08f0, 0x08ec, 0x08e8, 0x01ca, 0x01cb, 0x01cc),
+  },
+  {	.freq			= 5720,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x94, 0x00),
+	PHYREGS(0x08f4, 0x08f0, 0x08ec, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5725,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x79, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x40, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x40, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x94, 0x00),
+	PHYREGS(0x08f6, 0x08f2, 0x08ee, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5730,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x01,
+		   0x00, 0x94, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x01, 0x00, 0x94, 0x00),
+	PHYREGS(0x08f8, 0x08f4, 0x08f0, 0x01c9, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5735,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x7b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x93, 0x00),
+	PHYREGS(0x08fa, 0x08f6, 0x08f2, 0x01c8, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5740,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x93, 0x00),
+	PHYREGS(0x08fc, 0x08f8, 0x08f4, 0x01c8, 0x01c9, 0x01c9),
+  },
+  {	.freq			= 5745,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x93, 0x00),
+	PHYREGS(0x08fe, 0x08fa, 0x08f6, 0x01c8, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5750,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x93, 0x00),
+	PHYREGS(0x0900, 0x08fc, 0x08f8, 0x01c7, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5755,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7f, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x10, 0x30, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x30, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x93, 0x00),
+	PHYREGS(0x0902, 0x08fe, 0x08fa, 0x01c7, 0x01c8, 0x01c8),
+  },
+  {	.freq			= 5760,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x40, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x86, 0x05, 0x00,
+		   0x10, 0x20, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x93, 0x00, 0x20, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x93, 0x00),
+	PHYREGS(0x0904, 0x0900, 0x08fc, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5765,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x81, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x86, 0x05, 0x00,
+		   0x10, 0x20, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x20, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x0906, 0x0902, 0x08fe, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5770,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x41, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x86, 0x04, 0x00,
+		   0x10, 0x20, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x20, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x0908, 0x0904, 0x0900, 0x01c6, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5775,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x83, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x86, 0x04, 0x00,
+		   0x10, 0x20, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x20, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x090a, 0x0906, 0x0902, 0x01c5, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5780,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x42, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x86, 0x04, 0x00,
+		   0x10, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x090c, 0x0908, 0x0904, 0x01c5, 0x01c6, 0x01c6),
+  },
+  {	.freq			= 5785,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x85, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x090e, 0x090a, 0x0906, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5790,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x43, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x0910, 0x090c, 0x0908, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5795,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x87, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x0912, 0x090e, 0x090a, 0x01c4, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5800,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x44, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x0914, 0x0910, 0x090c, 0x01c3, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5805,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x89, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x0916, 0x0912, 0x090e, 0x01c3, 0x01c4, 0x01c4),
+  },
+  {	.freq			= 5810,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x45, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x0918, 0x0914, 0x0910, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5815,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x091a, 0x0916, 0x0912, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5820,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x46, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x091c, 0x0918, 0x0914, 0x01c2, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5825,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x091e, 0x091a, 0x0916, 0x01c1, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5830,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x47, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x0920, 0x091c, 0x0918, 0x01c1, 0x01c2, 0x01c2),
+  },
+  {	.freq			= 5840,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x48, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x10, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x0924, 0x0920, 0x091c, 0x01c0, 0x01c1, 0x01c2),
+  },
+  {	.freq			= 5850,
+	RADIOREGS3(0xe0, 0x00, 0x01, 0x02, 0x49, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x0928, 0x0924, 0x0920, 0x01bf, 0x01c0, 0x01c1),
+  },
+  {	.freq			= 5860,
+	RADIOREGS3(0xde, 0x00, 0x01, 0x02, 0x4a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x92, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x92, 0x00),
+	PHYREGS(0x092c, 0x0928, 0x0924, 0x01bf, 0x01bf, 0x01c0),
+  },
+  {	.freq			= 5870,
+	RADIOREGS3(0xdb, 0x00, 0x01, 0x02, 0x4b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x91, 0x00),
+	PHYREGS(0x0930, 0x092c, 0x0928, 0x01be, 0x01bf, 0x01bf),
+  },
+  {	.freq			= 5880,
+	RADIOREGS3(0xd8, 0x00, 0x01, 0x02, 0x4c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x91, 0x00),
+	PHYREGS(0x0934, 0x0930, 0x092c, 0x01bd, 0x01be, 0x01bf),
+  },
+  {	.freq			= 5890,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x91, 0x00),
+	PHYREGS(0x0938, 0x0934, 0x0930, 0x01bc, 0x01bd, 0x01be),
+  },
+  {	.freq			= 5900,
+	RADIOREGS3(0xd3, 0x00, 0x01, 0x02, 0x4e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x91, 0x00),
+	PHYREGS(0x093c, 0x0938, 0x0934, 0x01bc, 0x01bc, 0x01bd),
+  },
+  {	.freq			= 5910,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00,
+		   0x00, 0x91, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70,
+		   0x00, 0x00, 0x00, 0x91, 0x00),
+	PHYREGS(0x0940, 0x093c, 0x0938, 0x01bb, 0x01bc, 0x01bc),
+  },
+  {	.freq			= 2412,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x6c, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x04, 0x04, 0x04, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x89, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0b, 0x00, 0x89, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0b),
+	PHYREGS(0x03c9, 0x03c5, 0x03c1, 0x043a, 0x043f, 0x0443),
+  },
+  {	.freq			= 2417,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x71, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x89, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0a, 0x00, 0x89, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0a),
+	PHYREGS(0x03cb, 0x03c7, 0x03c3, 0x0438, 0x043d, 0x0441),
+  },
+  {	.freq			= 2422,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x76, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x89, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0f, 0x00, 0x0a, 0x00, 0x89, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0f, 0x00, 0x0a),
+	PHYREGS(0x03cd, 0x03c9, 0x03c5, 0x0436, 0x043a, 0x043f),
+  },
+  {	.freq			= 2427,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x7b, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x78, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x0a, 0x00, 0x78, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x0a),
+	PHYREGS(0x03cf, 0x03cb, 0x03c7, 0x0434, 0x0438, 0x043d),
+  },
+  {	.freq			= 2432,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x80, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x77, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x0a, 0x00, 0x77, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x0a),
+	PHYREGS(0x03d1, 0x03cd, 0x03c9, 0x0431, 0x0436, 0x043a),
+  },
+  {	.freq			= 2437,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x85, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x76, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x0a, 0x00, 0x76, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x0a),
+	PHYREGS(0x03d3, 0x03cf, 0x03cb, 0x042f, 0x0434, 0x0438),
+  },
+  {	.freq			= 2442,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8a, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x66, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x0a, 0x00, 0x66, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x0a),
+	PHYREGS(0x03d5, 0x03d1, 0x03cd, 0x042d, 0x0431, 0x0436),
+  },
+  {	.freq			= 2447,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8f, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x55, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x09, 0x00, 0x55, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x09),
+	PHYREGS(0x03d7, 0x03d3, 0x03cf, 0x042b, 0x042f, 0x0434),
+  },
+  {	.freq			= 2452,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x94, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x45, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0e, 0x00, 0x09, 0x00, 0x45, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0e, 0x00, 0x09),
+	PHYREGS(0x03d9, 0x03d5, 0x03d1, 0x0429, 0x042d, 0x0431),
+  },
+  {	.freq			= 2457,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x99, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x34, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0d, 0x00, 0x09, 0x00, 0x34, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0d, 0x00, 0x09),
+	PHYREGS(0x03db, 0x03d7, 0x03d3, 0x0427, 0x042b, 0x042f),
+  },
+  {	.freq			= 2462,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x9e, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x33, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0d, 0x00, 0x09, 0x00, 0x33, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0d, 0x00, 0x09),
+	PHYREGS(0x03dd, 0x03d9, 0x03d5, 0x0424, 0x0429, 0x042d),
+  },
+  {	.freq			= 2467,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa3, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x22, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0d, 0x00, 0x08, 0x00, 0x22, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0d, 0x00, 0x08),
+	PHYREGS(0x03df, 0x03db, 0x03d7, 0x0422, 0x0427, 0x042b),
+  },
+  {	.freq			= 2472,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa8, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x11, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0d, 0x00, 0x08, 0x00, 0x11, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0d, 0x00, 0x08),
+	PHYREGS(0x03e1, 0x03dd, 0x03d9, 0x0420, 0x0424, 0x0429),
+  },
+  {	.freq			= 2484,
+	RADIOREGS3(0xff, 0x01, 0x03, 0x09, 0xb4, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x20, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0d, 0x00, 0x08, 0x00, 0x00, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0d, 0x00, 0x08),
+	PHYREGS(0x03e6, 0x03e2, 0x03de, 0x041b, 0x041f, 0x0424),
+  },
 };
 
+static const struct b43_nphy_channeltab_entry_rev3 b43_nphy_channeltab_rev8[] = {
+  {	.freq			= 4920,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xec, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07b4, 0x07b0, 0x07ac, 0x0214, 0x0215, 0x0216),
+  },
+  {	.freq			= 4930,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xed, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07b8, 0x07b4, 0x07b0, 0x0213, 0x0214, 0x0215),
+  },
+  {	.freq			= 4940,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xee, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07bc, 0x07b8, 0x07b4, 0x0212, 0x0213, 0x0214),
+  },
+  {	.freq			= 4950,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xef, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x00, 0x00, 0x00, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c0, 0x07bc, 0x07b8, 0x0211, 0x0212, 0x0213),
+  },
+  {	.freq			= 4960,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf0, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c4, 0x07c0, 0x07bc, 0x020f, 0x0211, 0x0212),
+  },
+  {	.freq			= 4970,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf1, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07c8, 0x07c4, 0x07c0, 0x020e, 0x020f, 0x0211),
+  },
+  {	.freq			= 4980,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf2, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07cc, 0x07c8, 0x07c4, 0x020d, 0x020e, 0x020f),
+  },
+  {	.freq			= 4990,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf3, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d0, 0x07cc, 0x07c8, 0x020c, 0x020d, 0x020e),
+  },
+  {	.freq			= 5000,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf4, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d4, 0x07d0, 0x07cc, 0x020b, 0x020c, 0x020d),
+  },
+  {	.freq			= 5010,
+	RADIOREGS3(0xff, 0x01, 0x01, 0x01, 0xf5, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07d8, 0x07d4, 0x07d0, 0x020a, 0x020b, 0x020c),
+  },
+  {	.freq			= 5020,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf6, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07dc, 0x07d8, 0x07d4, 0x0209, 0x020a, 0x020b),
+  },
+  {	.freq			= 5030,
+	RADIOREGS3(0xf7, 0x01, 0x01, 0x01, 0xf7, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e0, 0x07dc, 0x07d8, 0x0208, 0x0209, 0x020a),
+  },
+  {	.freq			= 5040,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf8, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e4, 0x07e0, 0x07dc, 0x0207, 0x0208, 0x0209),
+  },
+  {	.freq			= 5050,
+	RADIOREGS3(0xef, 0x01, 0x01, 0x01, 0xf9, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07e8, 0x07e4, 0x07e0, 0x0206, 0x0207, 0x0208),
+  },
+  {	.freq			= 5060,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfa, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfe, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfe, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07ec, 0x07e8, 0x07e4, 0x0205, 0x0206, 0x0207),
+  },
+  {	.freq			= 5070,
+	RADIOREGS3(0xe6, 0x01, 0x01, 0x01, 0xfb, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfd, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f0, 0x07ec, 0x07e8, 0x0204, 0x0205, 0x0206),
+  },
+  {	.freq			= 5080,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfc, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfd, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f4, 0x07f0, 0x07ec, 0x0203, 0x0204, 0x0205),
+  },
+  {	.freq			= 5090,
+	RADIOREGS3(0xde, 0x01, 0x01, 0x01, 0xfd, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x01, 0x01, 0x01, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x09, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfd, 0x00, 0x09, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07f8, 0x07f4, 0x07f0, 0x0202, 0x0203, 0x0204),
+  },
+  {	.freq			= 5100,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xfe, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfd, 0x00, 0x08, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfd, 0x00, 0x08, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x07fc, 0x07f8, 0x07f4, 0x0201, 0x0202, 0x0203),
+  },
+  {	.freq			= 5110,
+	RADIOREGS3(0xd6, 0x01, 0x01, 0x01, 0xff, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0800, 0x07fc, 0x07f8, 0x0200, 0x0201, 0x0202),
+  },
+  {	.freq			= 5120,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x00, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0804, 0x0800, 0x07fc, 0x01ff, 0x0200, 0x0201),
+  },
+  {	.freq			= 5130,
+	RADIOREGS3(0xce, 0x01, 0x01, 0x02, 0x01, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfc, 0x00, 0x08, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfc, 0x00, 0x08, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0808, 0x0804, 0x0800, 0x01fe, 0x01ff, 0x0200),
+  },
+  {	.freq			= 5140,
+	RADIOREGS3(0xc6, 0x01, 0x01, 0x02, 0x02, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfb, 0x00, 0x08, 0x00, 0x77, 0x00, 0x0f,
+		   0x00, 0x6f, 0x00, 0xfb, 0x00, 0x08, 0x00, 0x77,
+		   0x00, 0x0f, 0x00, 0x6f, 0x00),
+	PHYREGS(0x080c, 0x0808, 0x0804, 0x01fd, 0x01fe, 0x01ff),
+  },
+  {	.freq			= 5160,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x04, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x07, 0x00, 0x77, 0x00, 0x0e,
+		   0x00, 0x6f, 0x00, 0xfa, 0x00, 0x07, 0x00, 0x77,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0814, 0x0810, 0x080c, 0x01fb, 0x01fc, 0x01fd),
+  },
+  {	.freq			= 5170,
+	RADIOREGS3(0xbe, 0x01, 0x01, 0x02, 0x05, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xfa, 0x00, 0x07, 0x00, 0x77, 0x00, 0x0e,
+		   0x00, 0x6f, 0x00, 0xfa, 0x00, 0x07, 0x00, 0x77,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0818, 0x0814, 0x0810, 0x01fa, 0x01fb, 0x01fc),
+  },
+  {	.freq			= 5180,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x06, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xf9, 0x00, 0x06, 0x00, 0x77, 0x00, 0x0e,
+		   0x00, 0x6f, 0x00, 0xf9, 0x00, 0x06, 0x00, 0x77,
+		   0x00, 0x0e, 0x00, 0x6f, 0x00),
+	PHYREGS(0x081c, 0x0818, 0x0814, 0x01f9, 0x01fa, 0x01fb),
+  },
+  {	.freq			= 5190,
+	RADIOREGS3(0xb6, 0x01, 0x01, 0x02, 0x07, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xf9, 0x00, 0x06, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xf9, 0x00, 0x06, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0820, 0x081c, 0x0818, 0x01f8, 0x01f9, 0x01fa),
+  },
+  {	.freq			= 5200,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x08, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xf9, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xf9, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0824, 0x0820, 0x081c, 0x01f7, 0x01f8, 0x01f9),
+  },
+  {	.freq			= 5210,
+	RADIOREGS3(0xaf, 0x01, 0x01, 0x02, 0x09, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8f, 0x0f, 0x00,
+		   0xff, 0xf9, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xf9, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0828, 0x0824, 0x0820, 0x01f6, 0x01f7, 0x01f8),
+  },
+  {	.freq			= 5220,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xfe, 0xd8, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xd8, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x082c, 0x0828, 0x0824, 0x01f5, 0x01f6, 0x01f7),
+  },
+  {	.freq			= 5230,
+	RADIOREGS3(0xa7, 0x01, 0x01, 0x02, 0x0b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xee, 0xd8, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xd8, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0830, 0x082c, 0x0828, 0x01f4, 0x01f5, 0x01f6),
+  },
+  {	.freq			= 5240,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xee, 0xc8, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xc8, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0834, 0x0830, 0x082c, 0x01f3, 0x01f4, 0x01f5),
+  },
+  {	.freq			= 5250,
+	RADIOREGS3(0xa0, 0x01, 0x01, 0x02, 0x0d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0f, 0x00,
+		   0xed, 0xc7, 0x00, 0x05, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xc7, 0x00, 0x05, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0838, 0x0834, 0x0830, 0x01f2, 0x01f3, 0x01f4),
+  },
+  {	.freq			= 5260,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x02, 0x02, 0x02, 0x8e, 0x0e, 0x00,
+		   0xed, 0xc7, 0x00, 0x04, 0x00, 0x77, 0x00, 0x0d,
+		   0x00, 0x6f, 0x00, 0xc7, 0x00, 0x04, 0x00, 0x77,
+		   0x00, 0x0d, 0x00, 0x6f, 0x00),
+	PHYREGS(0x083c, 0x0838, 0x0834, 0x01f1, 0x01f2, 0x01f3),
+  },
+  {	.freq			= 5270,
+	RADIOREGS3(0x98, 0x01, 0x01, 0x02, 0x0f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8e, 0x0e, 0x00,
+		   0xed, 0xc7, 0x00, 0x04, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xc7, 0x00, 0x04, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0840, 0x083c, 0x0838, 0x01f0, 0x01f1, 0x01f2),
+  },
+  {	.freq			= 5280,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x10, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xb7, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0844, 0x0840, 0x083c, 0x01f0, 0x01f0, 0x01f1),
+  },
+  {	.freq			= 5290,
+	RADIOREGS3(0x91, 0x01, 0x01, 0x02, 0x11, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xb7, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0848, 0x0844, 0x0840, 0x01ef, 0x01f0, 0x01f0),
+  },
+  {	.freq			= 5300,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x12, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xb7, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x084c, 0x0848, 0x0844, 0x01ee, 0x01ef, 0x01f0),
+  },
+  {	.freq			= 5310,
+	RADIOREGS3(0x8a, 0x01, 0x01, 0x02, 0x13, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdc, 0xb7, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0850, 0x084c, 0x0848, 0x01ed, 0x01ee, 0x01ef),
+  },
+  {	.freq			= 5320,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x14, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0e, 0x00,
+		   0xdb, 0xb7, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0c,
+		   0x00, 0x6f, 0x00, 0xb7, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0c, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0854, 0x0850, 0x084c, 0x01ec, 0x01ed, 0x01ee),
+  },
+  {	.freq			= 5330,
+	RADIOREGS3(0x83, 0x01, 0x01, 0x02, 0x15, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xcb, 0xa6, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0b,
+		   0x00, 0x6f, 0x00, 0xa6, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0858, 0x0854, 0x0850, 0x01eb, 0x01ec, 0x01ed),
+  },
+  {	.freq			= 5340,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x16, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8d, 0x0d, 0x00,
+		   0xca, 0xa6, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0b,
+		   0x00, 0x6f, 0x00, 0xa6, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x085c, 0x0858, 0x0854, 0x01ea, 0x01eb, 0x01ec),
+  },
+  {	.freq			= 5350,
+	RADIOREGS3(0x7c, 0x01, 0x01, 0x02, 0x17, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0d, 0x00,
+		   0xca, 0xa6, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0b,
+		   0x00, 0x6f, 0x00, 0xa6, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0b, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0860, 0x085c, 0x0858, 0x01e9, 0x01ea, 0x01eb),
+  },
+  {	.freq			= 5360,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x18, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0d, 0x00,
+		   0xc9, 0x95, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x95, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0864, 0x0860, 0x085c, 0x01e8, 0x01e9, 0x01ea),
+  },
+  {	.freq			= 5370,
+	RADIOREGS3(0x75, 0x01, 0x01, 0x02, 0x19, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0d, 0x00,
+		   0xc9, 0x95, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x95, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0868, 0x0864, 0x0860, 0x01e7, 0x01e8, 0x01e9),
+  },
+  {	.freq			= 5380,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb8, 0x95, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x95, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x086c, 0x0868, 0x0864, 0x01e6, 0x01e7, 0x01e8),
+  },
+  {	.freq			= 5390,
+	RADIOREGS3(0x6e, 0x01, 0x01, 0x02, 0x1b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb8, 0x84, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0870, 0x086c, 0x0868, 0x01e5, 0x01e6, 0x01e7),
+  },
+  {	.freq			= 5400,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb8, 0x84, 0x00, 0x03, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x03, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0874, 0x0870, 0x086c, 0x01e5, 0x01e5, 0x01e6),
+  },
+  {	.freq			= 5410,
+	RADIOREGS3(0x67, 0x01, 0x01, 0x02, 0x1d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xb7, 0x84, 0x00, 0x02, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x02, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0878, 0x0874, 0x0870, 0x01e4, 0x01e5, 0x01e5),
+  },
+  {	.freq			= 5420,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0c, 0x00,
+		   0xa7, 0x84, 0x00, 0x02, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x02, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x087c, 0x0878, 0x0874, 0x01e3, 0x01e4, 0x01e5),
+  },
+  {	.freq			= 5430,
+	RADIOREGS3(0x61, 0x01, 0x01, 0x02, 0x1f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x03, 0x03, 0x03, 0x8c, 0x0b, 0x00,
+		   0xa6, 0x84, 0x00, 0x02, 0x00, 0x77, 0x00, 0x0a,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x02, 0x00, 0x77,
+		   0x00, 0x0a, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0880, 0x087c, 0x0878, 0x01e2, 0x01e3, 0x01e4),
+  },
+  {	.freq			= 5440,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x20, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0xa6, 0x84, 0x00, 0x02, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x02, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0884, 0x0880, 0x087c, 0x01e1, 0x01e2, 0x01e3),
+  },
+  {	.freq			= 5450,
+	RADIOREGS3(0x5a, 0x01, 0x01, 0x02, 0x21, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0x95, 0x84, 0x00, 0x01, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x01, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0888, 0x0884, 0x0880, 0x01e0, 0x01e1, 0x01e2),
+  },
+  {	.freq			= 5460,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x22, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0x95, 0x84, 0x00, 0x01, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x84, 0x00, 0x01, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x088c, 0x0888, 0x0884, 0x01df, 0x01e0, 0x01e1),
+  },
+  {	.freq			= 5470,
+	RADIOREGS3(0x53, 0x01, 0x01, 0x02, 0x23, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8b, 0x0b, 0x00,
+		   0x94, 0x73, 0x00, 0x01, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x01, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0890, 0x088c, 0x0888, 0x01de, 0x01df, 0x01e0),
+  },
+  {	.freq			= 5480,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x24, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x84, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0894, 0x0890, 0x088c, 0x01dd, 0x01de, 0x01df),
+  },
+  {	.freq			= 5490,
+	RADIOREGS3(0x4d, 0x01, 0x01, 0x02, 0x25, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x83, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x0898, 0x0894, 0x0890, 0x01dd, 0x01dd, 0x01de),
+  },
+  {	.freq			= 5500,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x26, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x82, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x089c, 0x0898, 0x0894, 0x01dc, 0x01dd, 0x01dd),
+  },
+  {	.freq			= 5510,
+	RADIOREGS3(0x47, 0x01, 0x01, 0x02, 0x27, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x82, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08a0, 0x089c, 0x0898, 0x01db, 0x01dc, 0x01dd),
+  },
+  {	.freq			= 5520,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x28, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x0a, 0x00,
+		   0x72, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08a4, 0x08a0, 0x089c, 0x01da, 0x01db, 0x01dc),
+  },
+  {	.freq			= 5530,
+	RADIOREGS3(0x40, 0x01, 0x01, 0x02, 0x29, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x09, 0x00,
+		   0x72, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08a8, 0x08a4, 0x08a0, 0x01d9, 0x01da, 0x01db),
+  },
+  {	.freq			= 5540,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x8a, 0x09, 0x00,
+		   0x71, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08ac, 0x08a8, 0x08a4, 0x01d8, 0x01d9, 0x01da),
+  },
+  {	.freq			= 5550,
+	RADIOREGS3(0x3a, 0x01, 0x01, 0x02, 0x2b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x09, 0x00,
+		   0x61, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08b0, 0x08ac, 0x08a8, 0x01d7, 0x01d8, 0x01d9),
+  },
+  {	.freq			= 5560,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x09, 0x00,
+		   0x61, 0x73, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x73, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08b4, 0x08b0, 0x08ac, 0x01d7, 0x01d7, 0x01d8),
+  },
+  {	.freq			= 5570,
+	RADIOREGS3(0x34, 0x01, 0x01, 0x02, 0x2d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x09, 0x00,
+		   0x61, 0x62, 0x00, 0x00, 0x00, 0x77, 0x00, 0x09,
+		   0x00, 0x6f, 0x00, 0x62, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x09, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08b8, 0x08b4, 0x08b0, 0x01d6, 0x01d7, 0x01d7),
+  },
+  {	.freq			= 5580,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x08, 0x00,
+		   0x60, 0x62, 0x00, 0x00, 0x00, 0x77, 0x00, 0x08,
+		   0x00, 0x6f, 0x00, 0x62, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x08, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08bc, 0x08b8, 0x08b4, 0x01d5, 0x01d6, 0x01d7),
+  },
+  {	.freq			= 5590,
+	RADIOREGS3(0x2e, 0x01, 0x01, 0x02, 0x2f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x04, 0x04, 0x04, 0x89, 0x08, 0x00,
+		   0x50, 0x61, 0x00, 0x00, 0x00, 0x77, 0x00, 0x08,
+		   0x00, 0x6f, 0x00, 0x61, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x08, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08c0, 0x08bc, 0x08b8, 0x01d4, 0x01d5, 0x01d6),
+  },
+  {	.freq			= 5600,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x30, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x89, 0x08, 0x00,
+		   0x50, 0x51, 0x00, 0x00, 0x00, 0x77, 0x00, 0x08,
+		   0x00, 0x6f, 0x00, 0x51, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x08, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08c4, 0x08c0, 0x08bc, 0x01d3, 0x01d4, 0x01d5),
+  },
+  {	.freq			= 5610,
+	RADIOREGS3(0x28, 0x01, 0x01, 0x02, 0x31, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x89, 0x08, 0x00,
+		   0x50, 0x51, 0x00, 0x00, 0x00, 0x77, 0x00, 0x08,
+		   0x00, 0x6f, 0x00, 0x51, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x08, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08c8, 0x08c4, 0x08c0, 0x01d2, 0x01d3, 0x01d4),
+  },
+  {	.freq			= 5620,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x32, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x89, 0x08, 0x00,
+		   0x50, 0x50, 0x00, 0x00, 0x00, 0x77, 0x00, 0x07,
+		   0x00, 0x6f, 0x00, 0x50, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x07, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08cc, 0x08c8, 0x08c4, 0x01d2, 0x01d2, 0x01d3),
+  },
+  {	.freq			= 5630,
+	RADIOREGS3(0x21, 0x01, 0x01, 0x02, 0x33, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x50, 0x50, 0x00, 0x00, 0x00, 0x77, 0x00, 0x07,
+		   0x00, 0x6f, 0x00, 0x50, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x07, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08d0, 0x08cc, 0x08c8, 0x01d1, 0x01d2, 0x01d2),
+  },
+  {	.freq			= 5640,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x34, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x50, 0x00, 0x00, 0x00, 0x77, 0x00, 0x07,
+		   0x00, 0x6f, 0x00, 0x50, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x07, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08d4, 0x08d0, 0x08cc, 0x01d0, 0x01d1, 0x01d2),
+  },
+  {	.freq			= 5650,
+	RADIOREGS3(0x1c, 0x01, 0x01, 0x02, 0x35, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x40, 0x00, 0x00, 0x00, 0x77, 0x00, 0x07,
+		   0x00, 0x6f, 0x00, 0x40, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x07, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08d8, 0x08d4, 0x08d0, 0x01cf, 0x01d0, 0x01d1),
+  },
+  {	.freq			= 5660,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x36, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x40, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6f, 0x00, 0x40, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08dc, 0x08d8, 0x08d4, 0x01ce, 0x01cf, 0x01d0),
+  },
+  {	.freq			= 5670,
+	RADIOREGS3(0x16, 0x01, 0x01, 0x02, 0x37, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x88, 0x07, 0x00,
+		   0x40, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6f, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08e0, 0x08dc, 0x08d8, 0x01ce, 0x01ce, 0x01cf),
+  },
+  {	.freq			= 5680,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x38, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6f, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08e4, 0x08e0, 0x08dc, 0x01cd, 0x01ce, 0x01ce),
+  },
+  {	.freq			= 5690,
+	RADIOREGS3(0x10, 0x01, 0x01, 0x02, 0x39, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6f, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6f, 0x00),
+	PHYREGS(0x08e8, 0x08e4, 0x08e0, 0x01cc, 0x01cd, 0x01ce),
+  },
+  {	.freq			= 5700,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6e, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6e, 0x00),
+	PHYREGS(0x08ec, 0x08e8, 0x08e4, 0x01cb, 0x01cc, 0x01cd),
+  },
+  {	.freq			= 5710,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6e, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6e, 0x00),
+	PHYREGS(0x08f0, 0x08ec, 0x08e8, 0x01ca, 0x01cb, 0x01cc),
+  },
+  {	.freq			= 5720,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6e, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6e, 0x00),
+	PHYREGS(0x08f4, 0x08f0, 0x08ec, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5725,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x79, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x06, 0x00,
+		   0x30, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6e, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6e, 0x00),
+	PHYREGS(0x08f6, 0x08f2, 0x08ee, 0x01c9, 0x01ca, 0x01cb),
+  },
+  {	.freq			= 5730,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6e, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6e, 0x00),
+	PHYREGS(0x08f8, 0x08f4, 0x08f0, 0x01c9, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5735,
+	RADIOREGS3(0x03, 0x01, 0x02, 0x04, 0x7b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6d, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6d, 0x00),
+	PHYREGS(0x08fa, 0x08f6, 0x08f2, 0x01c8, 0x01c9, 0x01ca),
+  },
+  {	.freq			= 5740,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6d, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6d, 0x00),
+	PHYREGS(0x08fc, 0x08f8, 0x08f4, 0x01c8, 0x01c9, 0x01c9),
+  },
+  {	.freq			= 5745,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x30, 0x00, 0x00, 0x00, 0x77, 0x00, 0x06,
+		   0x00, 0x6d, 0x00, 0x30, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x06, 0x00, 0x6d, 0x00),
+	PHYREGS(0x08fe, 0x08fa, 0x08f6, 0x01c8, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5750,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x3f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x20, 0x20, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6d, 0x00, 0x20, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6d, 0x00),
+	PHYREGS(0x0900, 0x08fc, 0x08f8, 0x01c7, 0x01c8, 0x01c9),
+  },
+  {	.freq			= 5755,
+	RADIOREGS3(0xfe, 0x00, 0x02, 0x04, 0x7f, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x87, 0x05, 0x00,
+		   0x10, 0x20, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6c, 0x00, 0x20, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0902, 0x08fe, 0x08fa, 0x01c7, 0x01c8, 0x01c8),
+  },
+  {	.freq			= 5760,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x40, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x86, 0x05, 0x00,
+		   0x10, 0x20, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6c, 0x00, 0x20, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0904, 0x0900, 0x08fc, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5765,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x81, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x86, 0x05, 0x00,
+		   0x10, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6c, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6c, 0x00),
+	PHYREGS(0x0906, 0x0902, 0x08fe, 0x01c6, 0x01c7, 0x01c8),
+  },
+  {	.freq			= 5770,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x41, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x86, 0x04, 0x00,
+		   0x10, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0908, 0x0904, 0x0900, 0x01c6, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5775,
+	RADIOREGS3(0xf8, 0x00, 0x02, 0x04, 0x83, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x05, 0x05, 0x05, 0x86, 0x04, 0x00,
+		   0x10, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x090a, 0x0906, 0x0902, 0x01c5, 0x01c6, 0x01c7),
+  },
+  {	.freq			= 5780,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x42, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x05, 0x05, 0x05, 0x86, 0x04, 0x00,
+		   0x10, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x090c, 0x0908, 0x0904, 0x01c5, 0x01c6, 0x01c6),
+  },
+  {	.freq			= 5785,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x85, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x090e, 0x090a, 0x0906, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5790,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x43, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x10, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x10, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0910, 0x090c, 0x0908, 0x01c4, 0x01c5, 0x01c6),
+  },
+  {	.freq			= 5795,
+	RADIOREGS3(0xf2, 0x00, 0x02, 0x04, 0x87, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0912, 0x090e, 0x090a, 0x01c4, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5800,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x44, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6b, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6b, 0x00),
+	PHYREGS(0x0914, 0x0910, 0x090c, 0x01c3, 0x01c4, 0x01c5),
+  },
+  {	.freq			= 5805,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x89, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6a, 0x00),
+	PHYREGS(0x0916, 0x0912, 0x090e, 0x01c3, 0x01c4, 0x01c4),
+  },
+  {	.freq			= 5810,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x45, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6a, 0x00),
+	PHYREGS(0x0918, 0x0914, 0x0910, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5815,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8b, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6a, 0x00),
+	PHYREGS(0x091a, 0x0916, 0x0912, 0x01c2, 0x01c3, 0x01c4),
+  },
+  {	.freq			= 5820,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x46, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x6a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x6a, 0x00),
+	PHYREGS(0x091c, 0x0918, 0x0914, 0x01c2, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5825,
+	RADIOREGS3(0xed, 0x00, 0x02, 0x04, 0x8d, 0x07, 0x07, 0x04,
+		   0x10, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x69, 0x00),
+	PHYREGS(0x091e, 0x091a, 0x0916, 0x01c1, 0x01c2, 0x01c3),
+  },
+  {	.freq			= 5830,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x47, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x05,
+		   0x00, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x05, 0x00, 0x69, 0x00),
+	PHYREGS(0x0920, 0x091c, 0x0918, 0x01c1, 0x01c2, 0x01c2),
+  },
+  {	.freq			= 5840,
+	RADIOREGS3(0x0a, 0x01, 0x01, 0x02, 0x48, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x86, 0x04, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x69, 0x00),
+	PHYREGS(0x0924, 0x0920, 0x091c, 0x01c0, 0x01c1, 0x01c2),
+  },
+  {	.freq			= 5850,
+	RADIOREGS3(0xe0, 0x00, 0x01, 0x02, 0x49, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x69, 0x00),
+	PHYREGS(0x0928, 0x0924, 0x0920, 0x01bf, 0x01c0, 0x01c1),
+  },
+  {	.freq			= 5860,
+	RADIOREGS3(0xde, 0x00, 0x01, 0x02, 0x4a, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x69, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x69, 0x00),
+	PHYREGS(0x092c, 0x0928, 0x0924, 0x01bf, 0x01bf, 0x01c0),
+  },
+  {	.freq			= 5870,
+	RADIOREGS3(0xdb, 0x00, 0x01, 0x02, 0x4b, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x68, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x0930, 0x092c, 0x0928, 0x01be, 0x01bf, 0x01bf),
+  },
+  {	.freq			= 5880,
+	RADIOREGS3(0xd8, 0x00, 0x01, 0x02, 0x4c, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x68, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x0934, 0x0930, 0x092c, 0x01bd, 0x01be, 0x01bf),
+  },
+  {	.freq			= 5890,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4d, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x68, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x0938, 0x0934, 0x0930, 0x01bc, 0x01bd, 0x01be),
+  },
+  {	.freq			= 5900,
+	RADIOREGS3(0xd3, 0x00, 0x01, 0x02, 0x4e, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x68, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x093c, 0x0938, 0x0934, 0x01bc, 0x01bc, 0x01bd),
+  },
+  {	.freq			= 5910,
+	RADIOREGS3(0xd6, 0x00, 0x01, 0x02, 0x4f, 0x05, 0x05, 0x04,
+		   0x0c, 0x01, 0x06, 0x06, 0x06, 0x85, 0x03, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x04,
+		   0x00, 0x68, 0x00, 0x00, 0x00, 0x00, 0x00, 0x77,
+		   0x00, 0x04, 0x00, 0x68, 0x00),
+	PHYREGS(0x0940, 0x093c, 0x0938, 0x01bb, 0x01bc, 0x01bc),
+  },
+  {	.freq			= 2412,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x6c, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x04, 0x04, 0x04, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x78, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0b, 0x00, 0x0a, 0x00, 0x89, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0b, 0x00, 0x0a),
+	PHYREGS(0x03c9, 0x03c5, 0x03c1, 0x043a, 0x043f, 0x0443),
+  },
+  {	.freq			= 2417,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x71, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x78, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0b, 0x00, 0x0a, 0x00, 0x89, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0b, 0x00, 0x0a),
+	PHYREGS(0x03cb, 0x03c7, 0x03c3, 0x0438, 0x043d, 0x0441),
+  },
+  {	.freq			= 2422,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x76, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x67, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0b, 0x00, 0x0a, 0x00, 0x89, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0b, 0x00, 0x0a),
+	PHYREGS(0x03cd, 0x03c9, 0x03c5, 0x0436, 0x043a, 0x043f),
+  },
+  {	.freq			= 2427,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x7b, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x57, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x0a, 0x00, 0x78, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x0a),
+	PHYREGS(0x03cf, 0x03cb, 0x03c7, 0x0434, 0x0438, 0x043d),
+  },
+  {	.freq			= 2432,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x80, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x56, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x0a, 0x00, 0x77, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x0a),
+	PHYREGS(0x03d1, 0x03cd, 0x03c9, 0x0431, 0x0436, 0x043a),
+  },
+  {	.freq			= 2437,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x85, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x46, 0x00, 0x03, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x0a, 0x00, 0x76, 0x00, 0x03, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x0a),
+	PHYREGS(0x03d3, 0x03cf, 0x03cb, 0x042f, 0x0434, 0x0438),
+  },
+  {	.freq			= 2442,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8a, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x05, 0x05, 0x05, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x45, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x0a, 0x00, 0x66, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x0a),
+	PHYREGS(0x03d5, 0x03d1, 0x03cd, 0x042d, 0x0431, 0x0436),
+  },
+  {	.freq			= 2447,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x8f, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x34, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x09, 0x00, 0x55, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x09),
+	PHYREGS(0x03d7, 0x03d3, 0x03cf, 0x042b, 0x042f, 0x0434),
+  },
+  {	.freq			= 2452,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x94, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x23, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x09, 0x00, 0x45, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x09),
+	PHYREGS(0x03d9, 0x03d5, 0x03d1, 0x0429, 0x042d, 0x0431),
+  },
+  {	.freq			= 2457,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x99, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x12, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x0a, 0x00, 0x09, 0x00, 0x34, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x0a, 0x00, 0x09),
+	PHYREGS(0x03db, 0x03d7, 0x03d3, 0x0427, 0x042b, 0x042f),
+  },
+  {	.freq			= 2462,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0x9e, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x02, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x09, 0x00, 0x09, 0x00, 0x33, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x09, 0x00, 0x09),
+	PHYREGS(0x03dd, 0x03d9, 0x03d5, 0x0424, 0x0429, 0x042d),
+  },
+  {	.freq			= 2467,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa3, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x06, 0x06, 0x06, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x09, 0x00, 0x09, 0x00, 0x22, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x09, 0x00, 0x09),
+	PHYREGS(0x03df, 0x03db, 0x03d7, 0x0422, 0x0427, 0x042b),
+  },
+  {	.freq			= 2472,
+	RADIOREGS3(0x00, 0x01, 0x03, 0x09, 0xa8, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x30, 0x00,
+		   0x00, 0x00, 0x01, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x09, 0x00, 0x09, 0x00, 0x11, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x09, 0x00, 0x09),
+	PHYREGS(0x03e1, 0x03dd, 0x03d9, 0x0420, 0x0424, 0x0429),
+  },
+  {	.freq			= 2484,
+	RADIOREGS3(0xff, 0x01, 0x03, 0x09, 0xb4, 0x08, 0x08, 0x04,
+		   0x16, 0x01, 0x07, 0x07, 0x07, 0x8f, 0x20, 0x00,
+		   0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x70, 0x00,
+		   0x09, 0x00, 0x09, 0x00, 0x00, 0x00, 0x02, 0x00,
+		   0x70, 0x00, 0x09, 0x00, 0x09),
+	PHYREGS(0x03e6, 0x03e2, 0x03de, 0x041b, 0x041f, 0x0424),
+  },
+};
+
+static void b2056_upload_inittab(struct b43_wldev *dev, bool ghz5,
+				 bool ignore_uploadflag, u16 routing,
+				 const struct b2056_inittab_entry *e,
+				 unsigned int length)
+{
+	unsigned int i;
+	u16 value;
+
+	for (i = 0; i < length; i++, e++) {
+		if (!(e->flags & B2056_INITTAB_ENTRY_OK))
+			continue;
+		if ((e->flags & B2056_INITTAB_UPLOAD) || ignore_uploadflag) {
+			if (ghz5)
+				value = e->ghz5;
+			else
+				value = e->ghz2;
+			b43_radio_write(dev, routing | i, value);
+		}
+	}
+}
+
+void b2056_upload_inittabs(struct b43_wldev *dev,
+			   bool ghz5, bool ignore_uploadflag)
+{
+	struct b2056_inittabs_pts *pts;
+
+	if (dev->phy.rev >= ARRAY_SIZE(b2056_inittabs)) {
+		B43_WARN_ON(1);
+		return;
+	}
+	pts = &b2056_inittabs[dev->phy.rev];
+
+	b2056_upload_inittab(dev, ghz5, ignore_uploadflag,
+				B2056_SYN, pts->syn, pts->syn_length);
+	b2056_upload_inittab(dev, ghz5, ignore_uploadflag,
+				B2056_TX0, pts->tx, pts->tx_length);
+	b2056_upload_inittab(dev, ghz5, ignore_uploadflag,
+				B2056_TX1, pts->tx, pts->tx_length);
+	b2056_upload_inittab(dev, ghz5, ignore_uploadflag,
+				B2056_RX0, pts->rx, pts->rx_length);
+	b2056_upload_inittab(dev, ghz5, ignore_uploadflag,
+				B2056_RX1, pts->rx, pts->rx_length);
+}
+
 const struct b43_nphy_channeltab_entry_rev3 *
 b43_nphy_get_chantabent_rev3(struct b43_wldev *dev, u16 freq)
 {
 	const struct b43_nphy_channeltab_entry_rev3 *e;
-	unsigned int i;
+	unsigned int length, i;
+
+	switch (dev->phy.rev) {
+	case 3:
+		e = b43_nphy_channeltab_rev3;
+		length = ARRAY_SIZE(b43_nphy_channeltab_rev3);
+		break;
+	case 4:
+		e = b43_nphy_channeltab_rev4;
+		length = ARRAY_SIZE(b43_nphy_channeltab_rev4);
+		break;
+	case 5:
+		e = b43_nphy_channeltab_rev5;
+		length = ARRAY_SIZE(b43_nphy_channeltab_rev5);
+		break;
+	case 6:
+		e = b43_nphy_channeltab_rev6;
+		length = ARRAY_SIZE(b43_nphy_channeltab_rev6);
+		break;
+	case 7:
+	case 9:
+		e = b43_nphy_channeltab_rev7_9;
+		length = ARRAY_SIZE(b43_nphy_channeltab_rev7_9);
+		break;
+	case 8:
+		e = b43_nphy_channeltab_rev8;
+		length = ARRAY_SIZE(b43_nphy_channeltab_rev8);
+		break;
+	default:
+		B43_WARN_ON(1);
+		return NULL;
+	}
 
-	for (i = 0; i < ARRAY_SIZE(b43_nphy_channeltab_rev3); i++) {
-		e = &(b43_nphy_channeltab_rev3[i]);
+	for (i = 0; i < length; i++, e++) {
 		if (e->freq == freq)
 			return e;
 	}
diff --git a/drivers/net/wireless/b43/radio_2056.h b/drivers/net/wireless/b43/radio_2056.h
index fda6dafecb8..d601f6e7e31 100644
--- a/drivers/net/wireless/b43/radio_2056.h
+++ b/drivers/net/wireless/b43/radio_2056.h
@@ -4,6 +4,9 @@
 
   Copyright (c) 2010 Rafał Miłecki <zajec5@gmail.com>
 
+  Some parts of the code in this file are derived from the brcm80211
+  driver  Copyright (c) 2010 Broadcom Corporation
+
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
@@ -28,15 +31,1090 @@
 
 #include "tables_nphy.h"
 
+#define B2056_SYN			(0x0 << 12)
+#define B2056_TX0			(0x2 << 12)
+#define B2056_TX1			(0x3 << 12)
+#define B2056_RX0			(0x6 << 12)
+#define B2056_RX1			(0x7 << 12)
+#define B2056_ALLTX			(0xE << 12)
+#define B2056_ALLRX			(0xF << 12)
+
+#define B2056_SYN_RESERVED_ADDR0	0x00
+#define B2056_SYN_IDCODE		0x01
+#define B2056_SYN_RESERVED_ADDR2	0x02
+#define B2056_SYN_RESERVED_ADDR3	0x03
+#define B2056_SYN_RESERVED_ADDR4	0x04
+#define B2056_SYN_RESERVED_ADDR5	0x05
+#define B2056_SYN_RESERVED_ADDR6	0x06
+#define B2056_SYN_RESERVED_ADDR7	0x07
+#define B2056_SYN_COM_CTRL		0x08
+#define B2056_SYN_COM_PU		0x09
+#define B2056_SYN_COM_OVR		0x0A
+#define B2056_SYN_COM_RESET		0x0B
+#define B2056_SYN_COM_RCAL		0x0C
+#define B2056_SYN_COM_RC_RXLPF		0x0D
+#define B2056_SYN_COM_RC_TXLPF		0x0E
+#define B2056_SYN_COM_RC_RXHPF		0x0F
+#define B2056_SYN_RESERVED_ADDR16	0x10
+#define B2056_SYN_RESERVED_ADDR17	0x11
+#define B2056_SYN_RESERVED_ADDR18	0x12
+#define B2056_SYN_RESERVED_ADDR19	0x13
+#define B2056_SYN_RESERVED_ADDR20	0x14
+#define B2056_SYN_RESERVED_ADDR21	0x15
+#define B2056_SYN_RESERVED_ADDR22	0x16
+#define B2056_SYN_RESERVED_ADDR23	0x17
+#define B2056_SYN_RESERVED_ADDR24	0x18
+#define B2056_SYN_RESERVED_ADDR25	0x19
+#define B2056_SYN_RESERVED_ADDR26	0x1A
+#define B2056_SYN_RESERVED_ADDR27	0x1B
+#define B2056_SYN_RESERVED_ADDR28	0x1C
+#define B2056_SYN_RESERVED_ADDR29	0x1D
+#define B2056_SYN_RESERVED_ADDR30	0x1E
+#define B2056_SYN_RESERVED_ADDR31	0x1F
+#define B2056_SYN_GPIO_MASTER1		0x20
+#define B2056_SYN_GPIO_MASTER2		0x21
+#define B2056_SYN_TOPBIAS_MASTER	0x22
+#define B2056_SYN_TOPBIAS_RCAL		0x23
+#define B2056_SYN_AFEREG		0x24
+#define B2056_SYN_TEMPPROCSENSE		0x25
+#define B2056_SYN_TEMPPROCSENSEIDAC	0x26
+#define B2056_SYN_TEMPPROCSENSERCAL	0x27
+#define B2056_SYN_LPO			0x28
+#define B2056_SYN_VDDCAL_MASTER		0x29
+#define B2056_SYN_VDDCAL_IDAC		0x2A
+#define B2056_SYN_VDDCAL_STATUS		0x2B
+#define B2056_SYN_RCAL_MASTER		0x2C
+#define B2056_SYN_RCAL_CODE_OUT		0x2D
+#define B2056_SYN_RCCAL_CTRL0		0x2E
+#define B2056_SYN_RCCAL_CTRL1		0x2F
+#define B2056_SYN_RCCAL_CTRL2		0x30
+#define B2056_SYN_RCCAL_CTRL3		0x31
+#define B2056_SYN_RCCAL_CTRL4		0x32
+#define B2056_SYN_RCCAL_CTRL5		0x33
+#define B2056_SYN_RCCAL_CTRL6		0x34
+#define B2056_SYN_RCCAL_CTRL7		0x35
+#define B2056_SYN_RCCAL_CTRL8		0x36
+#define B2056_SYN_RCCAL_CTRL9		0x37
+#define B2056_SYN_RCCAL_CTRL10		0x38
+#define B2056_SYN_RCCAL_CTRL11		0x39
+#define B2056_SYN_ZCAL_SPARE1		0x3A
+#define B2056_SYN_ZCAL_SPARE2		0x3B
+#define B2056_SYN_PLL_MAST1		0x3C
+#define B2056_SYN_PLL_MAST2		0x3D
+#define B2056_SYN_PLL_MAST3		0x3E
+#define B2056_SYN_PLL_BIAS_RESET	0x3F
+#define B2056_SYN_PLL_XTAL0		0x40
+#define B2056_SYN_PLL_XTAL1		0x41
+#define B2056_SYN_PLL_XTAL3		0x42
+#define B2056_SYN_PLL_XTAL4		0x43
+#define B2056_SYN_PLL_XTAL5		0x44
+#define B2056_SYN_PLL_XTAL6		0x45
+#define B2056_SYN_PLL_REFDIV		0x46
+#define B2056_SYN_PLL_PFD		0x47
+#define B2056_SYN_PLL_CP1		0x48
+#define B2056_SYN_PLL_CP2		0x49
+#define B2056_SYN_PLL_CP3		0x4A
+#define B2056_SYN_PLL_LOOPFILTER1	0x4B
+#define B2056_SYN_PLL_LOOPFILTER2	0x4C
+#define B2056_SYN_PLL_LOOPFILTER3	0x4D
+#define B2056_SYN_PLL_LOOPFILTER4	0x4E
+#define B2056_SYN_PLL_LOOPFILTER5	0x4F
+#define B2056_SYN_PLL_MMD1		0x50
+#define B2056_SYN_PLL_MMD2		0x51
+#define B2056_SYN_PLL_VCO1		0x52
+#define B2056_SYN_PLL_VCO2		0x53
+#define B2056_SYN_PLL_MONITOR1		0x54
+#define B2056_SYN_PLL_MONITOR2		0x55
+#define B2056_SYN_PLL_VCOCAL1		0x56
+#define B2056_SYN_PLL_VCOCAL2		0x57
+#define B2056_SYN_PLL_VCOCAL4		0x58
+#define B2056_SYN_PLL_VCOCAL5		0x59
+#define B2056_SYN_PLL_VCOCAL6		0x5A
+#define B2056_SYN_PLL_VCOCAL7		0x5B
+#define B2056_SYN_PLL_VCOCAL8		0x5C
+#define B2056_SYN_PLL_VCOCAL9		0x5D
+#define B2056_SYN_PLL_VCOCAL10		0x5E
+#define B2056_SYN_PLL_VCOCAL11		0x5F
+#define B2056_SYN_PLL_VCOCAL12		0x60
+#define B2056_SYN_PLL_VCOCAL13		0x61
+#define B2056_SYN_PLL_VREG		0x62
+#define B2056_SYN_PLL_STATUS1		0x63
+#define B2056_SYN_PLL_STATUS2		0x64
+#define B2056_SYN_PLL_STATUS3		0x65
+#define B2056_SYN_LOGEN_PU0		0x66
+#define B2056_SYN_LOGEN_PU1		0x67
+#define B2056_SYN_LOGEN_PU2		0x68
+#define B2056_SYN_LOGEN_PU3		0x69
+#define B2056_SYN_LOGEN_PU5		0x6A
+#define B2056_SYN_LOGEN_PU6		0x6B
+#define B2056_SYN_LOGEN_PU7		0x6C
+#define B2056_SYN_LOGEN_PU8		0x6D
+#define B2056_SYN_LOGEN_BIAS_RESET	0x6E
+#define B2056_SYN_LOGEN_RCCR1		0x6F
+#define B2056_SYN_LOGEN_VCOBUF1		0x70
+#define B2056_SYN_LOGEN_MIXER1		0x71
+#define B2056_SYN_LOGEN_MIXER2		0x72
+#define B2056_SYN_LOGEN_BUF1		0x73
+#define B2056_SYN_LOGENBUF2		0x74
+#define B2056_SYN_LOGEN_BUF3		0x75
+#define B2056_SYN_LOGEN_BUF4		0x76
+#define B2056_SYN_LOGEN_DIV1		0x77
+#define B2056_SYN_LOGEN_DIV2		0x78
+#define B2056_SYN_LOGEN_DIV3		0x79
+#define B2056_SYN_LOGEN_ACL1		0x7A
+#define B2056_SYN_LOGEN_ACL2		0x7B
+#define B2056_SYN_LOGEN_ACL3		0x7C
+#define B2056_SYN_LOGEN_ACL4		0x7D
+#define B2056_SYN_LOGEN_ACL5		0x7E
+#define B2056_SYN_LOGEN_ACL6		0x7F
+#define B2056_SYN_LOGEN_ACLOUT		0x80
+#define B2056_SYN_LOGEN_ACLCAL1		0x81
+#define B2056_SYN_LOGEN_ACLCAL2		0x82
+#define B2056_SYN_LOGEN_ACLCAL3		0x83
+#define B2056_SYN_CALEN			0x84
+#define B2056_SYN_LOGEN_PEAKDET1	0x85
+#define B2056_SYN_LOGEN_CORE_ACL_OVR	0x86
+#define B2056_SYN_LOGEN_RX_DIFF_ACL_OVR	0x87
+#define B2056_SYN_LOGEN_TX_DIFF_ACL_OVR	0x88
+#define B2056_SYN_LOGEN_RX_CMOS_ACL_OVR	0x89
+#define B2056_SYN_LOGEN_TX_CMOS_ACL_OVR	0x8A
+#define B2056_SYN_LOGEN_VCOBUF2		0x8B
+#define B2056_SYN_LOGEN_MIXER3		0x8C
+#define B2056_SYN_LOGEN_BUF5		0x8D
+#define B2056_SYN_LOGEN_BUF6		0x8E
+#define B2056_SYN_LOGEN_CBUFRX1		0x8F
+#define B2056_SYN_LOGEN_CBUFRX2		0x90
+#define B2056_SYN_LOGEN_CBUFRX3		0x91
+#define B2056_SYN_LOGEN_CBUFRX4		0x92
+#define B2056_SYN_LOGEN_CBUFTX1		0x93
+#define B2056_SYN_LOGEN_CBUFTX2		0x94
+#define B2056_SYN_LOGEN_CBUFTX3		0x95
+#define B2056_SYN_LOGEN_CBUFTX4		0x96
+#define B2056_SYN_LOGEN_CMOSRX1		0x97
+#define B2056_SYN_LOGEN_CMOSRX2		0x98
+#define B2056_SYN_LOGEN_CMOSRX3		0x99
+#define B2056_SYN_LOGEN_CMOSRX4		0x9A
+#define B2056_SYN_LOGEN_CMOSTX1		0x9B
+#define B2056_SYN_LOGEN_CMOSTX2		0x9C
+#define B2056_SYN_LOGEN_CMOSTX3		0x9D
+#define B2056_SYN_LOGEN_CMOSTX4		0x9E
+#define B2056_SYN_LOGEN_VCOBUF2_OVRVAL	0x9F
+#define B2056_SYN_LOGEN_MIXER3_OVRVAL	0xA0
+#define B2056_SYN_LOGEN_BUF5_OVRVAL	0xA1
+#define B2056_SYN_LOGEN_BUF6_OVRVAL	0xA2
+#define B2056_SYN_LOGEN_CBUFRX1_OVRVAL	0xA3
+#define B2056_SYN_LOGEN_CBUFRX2_OVRVAL	0xA4
+#define B2056_SYN_LOGEN_CBUFRX3_OVRVAL	0xA5
+#define B2056_SYN_LOGEN_CBUFRX4_OVRVAL	0xA6
+#define B2056_SYN_LOGEN_CBUFTX1_OVRVAL	0xA7
+#define B2056_SYN_LOGEN_CBUFTX2_OVRVAL	0xA8
+#define B2056_SYN_LOGEN_CBUFTX3_OVRVAL	0xA9
+#define B2056_SYN_LOGEN_CBUFTX4_OVRVAL	0xAA
+#define B2056_SYN_LOGEN_CMOSRX1_OVRVAL	0xAB
+#define B2056_SYN_LOGEN_CMOSRX2_OVRVAL	0xAC
+#define B2056_SYN_LOGEN_CMOSRX3_OVRVAL	0xAD
+#define B2056_SYN_LOGEN_CMOSRX4_OVRVAL	0xAE
+#define B2056_SYN_LOGEN_CMOSTX1_OVRVAL	0xAF
+#define B2056_SYN_LOGEN_CMOSTX2_OVRVAL	0xB0
+#define B2056_SYN_LOGEN_CMOSTX3_OVRVAL	0xB1
+#define B2056_SYN_LOGEN_CMOSTX4_OVRVAL	0xB2
+#define B2056_SYN_LOGEN_ACL_WAITCNT	0xB3
+#define B2056_SYN_LOGEN_CORE_CALVALID	0xB4
+#define B2056_SYN_LOGEN_RX_CMOS_CALVALID	0xB5
+#define B2056_SYN_LOGEN_TX_CMOS_VALID	0xB6
+
+#define B2056_TX_RESERVED_ADDR0		0x00
+#define B2056_TX_IDCODE			0x01
+#define B2056_TX_RESERVED_ADDR2		0x02
+#define B2056_TX_RESERVED_ADDR3		0x03
+#define B2056_TX_RESERVED_ADDR4		0x04
+#define B2056_TX_RESERVED_ADDR5		0x05
+#define B2056_TX_RESERVED_ADDR6		0x06
+#define B2056_TX_RESERVED_ADDR7		0x07
+#define B2056_TX_COM_CTRL		0x08
+#define B2056_TX_COM_PU			0x09
+#define B2056_TX_COM_OVR		0x0A
+#define B2056_TX_COM_RESET		0x0B
+#define B2056_TX_COM_RCAL		0x0C
+#define B2056_TX_COM_RC_RXLPF		0x0D
+#define B2056_TX_COM_RC_TXLPF		0x0E
+#define B2056_TX_COM_RC_RXHPF		0x0F
+#define B2056_TX_RESERVED_ADDR16	0x10
+#define B2056_TX_RESERVED_ADDR17	0x11
+#define B2056_TX_RESERVED_ADDR18	0x12
+#define B2056_TX_RESERVED_ADDR19	0x13
+#define B2056_TX_RESERVED_ADDR20	0x14
+#define B2056_TX_RESERVED_ADDR21	0x15
+#define B2056_TX_RESERVED_ADDR22	0x16
+#define B2056_TX_RESERVED_ADDR23	0x17
+#define B2056_TX_RESERVED_ADDR24	0x18
+#define B2056_TX_RESERVED_ADDR25	0x19
+#define B2056_TX_RESERVED_ADDR26	0x1A
+#define B2056_TX_RESERVED_ADDR27	0x1B
+#define B2056_TX_RESERVED_ADDR28	0x1C
+#define B2056_TX_RESERVED_ADDR29	0x1D
+#define B2056_TX_RESERVED_ADDR30	0x1E
+#define B2056_TX_RESERVED_ADDR31	0x1F
+#define B2056_TX_IQCAL_GAIN_BW		0x20
+#define B2056_TX_LOFT_FINE_I		0x21
+#define B2056_TX_LOFT_FINE_Q		0x22
+#define B2056_TX_LOFT_COARSE_I		0x23
+#define B2056_TX_LOFT_COARSE_Q		0x24
+#define B2056_TX_TX_COM_MASTER1		0x25
+#define B2056_TX_TX_COM_MASTER2		0x26
+#define B2056_TX_RXIQCAL_TXMUX		0x27
+#define B2056_TX_TX_SSI_MASTER		0x28
+#define B2056_TX_IQCAL_VCM_HG		0x29
+#define B2056_TX_IQCAL_IDAC		0x2A
+#define B2056_TX_TSSI_VCM		0x2B
+#define B2056_TX_TX_AMP_DET		0x2C
+#define B2056_TX_TX_SSI_MUX		0x2D
+#define B2056_TX_TSSIA			0x2E
+#define B2056_TX_TSSIG			0x2F
+#define B2056_TX_TSSI_MISC1		0x30
+#define B2056_TX_TSSI_MISC2		0x31
+#define B2056_TX_TSSI_MISC3		0x32
+#define B2056_TX_PA_SPARE1		0x33
+#define B2056_TX_PA_SPARE2		0x34
+#define B2056_TX_INTPAA_MASTER		0x35
+#define B2056_TX_INTPAA_GAIN		0x36
+#define B2056_TX_INTPAA_BOOST_TUNE	0x37
+#define B2056_TX_INTPAA_IAUX_STAT	0x38
+#define B2056_TX_INTPAA_IAUX_DYN	0x39
+#define B2056_TX_INTPAA_IMAIN_STAT	0x3A
+#define B2056_TX_INTPAA_IMAIN_DYN	0x3B
+#define B2056_TX_INTPAA_CASCBIAS	0x3C
+#define B2056_TX_INTPAA_PASLOPE		0x3D
+#define B2056_TX_INTPAA_PA_MISC		0x3E
+#define B2056_TX_INTPAG_MASTER		0x3F
+#define B2056_TX_INTPAG_GAIN		0x40
+#define B2056_TX_INTPAG_BOOST_TUNE	0x41
+#define B2056_TX_INTPAG_IAUX_STAT	0x42
+#define B2056_TX_INTPAG_IAUX_DYN	0x43
+#define B2056_TX_INTPAG_IMAIN_STAT	0x44
+#define B2056_TX_INTPAG_IMAIN_DYN	0x45
+#define B2056_TX_INTPAG_CASCBIAS	0x46
+#define B2056_TX_INTPAG_PASLOPE		0x47
+#define B2056_TX_INTPAG_PA_MISC		0x48
+#define B2056_TX_PADA_MASTER		0x49
+#define B2056_TX_PADA_IDAC		0x4A
+#define B2056_TX_PADA_CASCBIAS		0x4B
+#define B2056_TX_PADA_GAIN		0x4C
+#define B2056_TX_PADA_BOOST_TUNE	0x4D
+#define B2056_TX_PADA_SLOPE		0x4E
+#define B2056_TX_PADG_MASTER		0x4F
+#define B2056_TX_PADG_IDAC		0x50
+#define B2056_TX_PADG_CASCBIAS		0x51
+#define B2056_TX_PADG_GAIN		0x52
+#define B2056_TX_PADG_BOOST_TUNE	0x53
+#define B2056_TX_PADG_SLOPE		0x54
+#define B2056_TX_PGAA_MASTER		0x55
+#define B2056_TX_PGAA_IDAC		0x56
+#define B2056_TX_PGAA_GAIN		0x57
+#define B2056_TX_PGAA_BOOST_TUNE	0x58
+#define B2056_TX_PGAA_SLOPE		0x59
+#define B2056_TX_PGAA_MISC		0x5A
+#define B2056_TX_PGAG_MASTER		0x5B
+#define B2056_TX_PGAG_IDAC		0x5C
+#define B2056_TX_PGAG_GAIN		0x5D
+#define B2056_TX_PGAG_BOOST_TUNE	0x5E
+#define B2056_TX_PGAG_SLOPE		0x5F
+#define B2056_TX_PGAG_MISC		0x60
+#define B2056_TX_MIXA_MASTER		0x61
+#define B2056_TX_MIXA_BOOST_TUNE	0x62
+#define B2056_TX_MIXG			0x63
+#define B2056_TX_MIXG_BOOST_TUNE	0x64
+#define B2056_TX_BB_GM_MASTER		0x65
+#define B2056_TX_GMBB_GM		0x66
+#define B2056_TX_GMBB_IDAC		0x67
+#define B2056_TX_TXLPF_MASTER		0x68
+#define B2056_TX_TXLPF_RCCAL		0x69
+#define B2056_TX_TXLPF_RCCAL_OFF0	0x6A
+#define B2056_TX_TXLPF_RCCAL_OFF1	0x6B
+#define B2056_TX_TXLPF_RCCAL_OFF2	0x6C
+#define B2056_TX_TXLPF_RCCAL_OFF3	0x6D
+#define B2056_TX_TXLPF_RCCAL_OFF4	0x6E
+#define B2056_TX_TXLPF_RCCAL_OFF5	0x6F
+#define B2056_TX_TXLPF_RCCAL_OFF6	0x70
+#define B2056_TX_TXLPF_BW		0x71
+#define B2056_TX_TXLPF_GAIN		0x72
+#define B2056_TX_TXLPF_IDAC		0x73
+#define B2056_TX_TXLPF_IDAC_0		0x74
+#define B2056_TX_TXLPF_IDAC_1		0x75
+#define B2056_TX_TXLPF_IDAC_2		0x76
+#define B2056_TX_TXLPF_IDAC_3		0x77
+#define B2056_TX_TXLPF_IDAC_4		0x78
+#define B2056_TX_TXLPF_IDAC_5		0x79
+#define B2056_TX_TXLPF_IDAC_6		0x7A
+#define B2056_TX_TXLPF_OPAMP_IDAC	0x7B
+#define B2056_TX_TXLPF_MISC		0x7C
+#define B2056_TX_TXSPARE1		0x7D
+#define B2056_TX_TXSPARE2		0x7E
+#define B2056_TX_TXSPARE3		0x7F
+#define B2056_TX_TXSPARE4		0x80
+#define B2056_TX_TXSPARE5		0x81
+#define B2056_TX_TXSPARE6		0x82
+#define B2056_TX_TXSPARE7		0x83
+#define B2056_TX_TXSPARE8		0x84
+#define B2056_TX_TXSPARE9		0x85
+#define B2056_TX_TXSPARE10		0x86
+#define B2056_TX_TXSPARE11		0x87
+#define B2056_TX_TXSPARE12		0x88
+#define B2056_TX_TXSPARE13		0x89
+#define B2056_TX_TXSPARE14		0x8A
+#define B2056_TX_TXSPARE15		0x8B
+#define B2056_TX_TXSPARE16		0x8C
+#define B2056_TX_STATUS_INTPA_GAIN	0x8D
+#define B2056_TX_STATUS_PAD_GAIN	0x8E
+#define B2056_TX_STATUS_PGA_GAIN	0x8F
+#define B2056_TX_STATUS_GM_TXLPF_GAIN	0x90
+#define B2056_TX_STATUS_TXLPF_BW	0x91
+#define B2056_TX_STATUS_TXLPF_RC	0x92
+#define B2056_TX_GMBB_IDAC0		0x93
+#define B2056_TX_GMBB_IDAC1		0x94
+#define B2056_TX_GMBB_IDAC2		0x95
+#define B2056_TX_GMBB_IDAC3		0x96
+#define B2056_TX_GMBB_IDAC4		0x97
+#define B2056_TX_GMBB_IDAC5		0x98
+#define B2056_TX_GMBB_IDAC6		0x99
+#define B2056_TX_GMBB_IDAC7		0x9A
+
+#define B2056_RX_RESERVED_ADDR0		0x00
+#define B2056_RX_IDCODE			0x01
+#define B2056_RX_RESERVED_ADDR2		0x02
+#define B2056_RX_RESERVED_ADDR3		0x03
+#define B2056_RX_RESERVED_ADDR4		0x04
+#define B2056_RX_RESERVED_ADDR5		0x05
+#define B2056_RX_RESERVED_ADDR6		0x06
+#define B2056_RX_RESERVED_ADDR7		0x07
+#define B2056_RX_COM_CTRL		0x08
+#define B2056_RX_COM_PU			0x09
+#define B2056_RX_COM_OVR		0x0A
+#define B2056_RX_COM_RESET		0x0B
+#define B2056_RX_COM_RCAL		0x0C
+#define B2056_RX_COM_RC_RXLPF		0x0D
+#define B2056_RX_COM_RC_TXLPF		0x0E
+#define B2056_RX_COM_RC_RXHPF		0x0F
+#define B2056_RX_RESERVED_ADDR16	0x10
+#define B2056_RX_RESERVED_ADDR17	0x11
+#define B2056_RX_RESERVED_ADDR18	0x12
+#define B2056_RX_RESERVED_ADDR19	0x13
+#define B2056_RX_RESERVED_ADDR20	0x14
+#define B2056_RX_RESERVED_ADDR21	0x15
+#define B2056_RX_RESERVED_ADDR22	0x16
+#define B2056_RX_RESERVED_ADDR23	0x17
+#define B2056_RX_RESERVED_ADDR24	0x18
+#define B2056_RX_RESERVED_ADDR25	0x19
+#define B2056_RX_RESERVED_ADDR26	0x1A
+#define B2056_RX_RESERVED_ADDR27	0x1B
+#define B2056_RX_RESERVED_ADDR28	0x1C
+#define B2056_RX_RESERVED_ADDR29	0x1D
+#define B2056_RX_RESERVED_ADDR30	0x1E
+#define B2056_RX_RESERVED_ADDR31	0x1F
+#define B2056_RX_RXIQCAL_RXMUX		0x20
+#define B2056_RX_RSSI_PU		0x21
+#define B2056_RX_RSSI_SEL		0x22
+#define B2056_RX_RSSI_GAIN		0x23
+#define B2056_RX_RSSI_NB_IDAC		0x24
+#define B2056_RX_RSSI_WB2I_IDAC_1	0x25
+#define B2056_RX_RSSI_WB2I_IDAC_2	0x26
+#define B2056_RX_RSSI_WB2Q_IDAC_1	0x27
+#define B2056_RX_RSSI_WB2Q_IDAC_2	0x28
+#define B2056_RX_RSSI_POLE		0x29
+#define B2056_RX_RSSI_WB1_IDAC		0x2A
+#define B2056_RX_RSSI_MISC		0x2B
+#define B2056_RX_LNAA_MASTER		0x2C
+#define B2056_RX_LNAA_TUNE		0x2D
+#define B2056_RX_LNAA_GAIN		0x2E
+#define B2056_RX_LNA_A_SLOPE		0x2F
+#define B2056_RX_BIASPOLE_LNAA1_IDAC	0x30
+#define B2056_RX_LNAA2_IDAC		0x31
+#define B2056_RX_LNA1A_MISC		0x32
+#define B2056_RX_LNAG_MASTER		0x33
+#define B2056_RX_LNAG_TUNE		0x34
+#define B2056_RX_LNAG_GAIN		0x35
+#define B2056_RX_LNA_G_SLOPE		0x36
+#define B2056_RX_BIASPOLE_LNAG1_IDAC	0x37
+#define B2056_RX_LNAG2_IDAC		0x38
+#define B2056_RX_LNA1G_MISC		0x39
+#define B2056_RX_MIXA_MASTER		0x3A
+#define B2056_RX_MIXA_VCM		0x3B
+#define B2056_RX_MIXA_CTRLPTAT		0x3C
+#define B2056_RX_MIXA_LOB_BIAS		0x3D
+#define B2056_RX_MIXA_CORE_IDAC		0x3E
+#define B2056_RX_MIXA_CMFB_IDAC		0x3F
+#define B2056_RX_MIXA_BIAS_AUX		0x40
+#define B2056_RX_MIXA_BIAS_MAIN		0x41
+#define B2056_RX_MIXA_BIAS_MISC		0x42
+#define B2056_RX_MIXA_MAST_BIAS		0x43
+#define B2056_RX_MIXG_MASTER		0x44
+#define B2056_RX_MIXG_VCM		0x45
+#define B2056_RX_MIXG_CTRLPTAT		0x46
+#define B2056_RX_MIXG_LOB_BIAS		0x47
+#define B2056_RX_MIXG_CORE_IDAC		0x48
+#define B2056_RX_MIXG_CMFB_IDAC		0x49
+#define B2056_RX_MIXG_BIAS_AUX		0x4A
+#define B2056_RX_MIXG_BIAS_MAIN		0x4B
+#define B2056_RX_MIXG_BIAS_MISC		0x4C
+#define B2056_RX_MIXG_MAST_BIAS		0x4D
+#define B2056_RX_TIA_MASTER		0x4E
+#define B2056_RX_TIA_IOPAMP		0x4F
+#define B2056_RX_TIA_QOPAMP		0x50
+#define B2056_RX_TIA_IMISC		0x51
+#define B2056_RX_TIA_QMISC		0x52
+#define B2056_RX_TIA_GAIN		0x53
+#define B2056_RX_TIA_SPARE1		0x54
+#define B2056_RX_TIA_SPARE2		0x55
+#define B2056_RX_BB_LPF_MASTER		0x56
+#define B2056_RX_AACI_MASTER		0x57
+#define B2056_RX_RXLPF_IDAC		0x58
+#define B2056_RX_RXLPF_OPAMPBIAS_LOWQ	0x59
+#define B2056_RX_RXLPF_OPAMPBIAS_HIGHQ	0x5A
+#define B2056_RX_RXLPF_BIAS_DCCANCEL	0x5B
+#define B2056_RX_RXLPF_OUTVCM		0x5C
+#define B2056_RX_RXLPF_INVCM_BODY	0x5D
+#define B2056_RX_RXLPF_CC_OP		0x5E
+#define B2056_RX_RXLPF_GAIN		0x5F
+#define B2056_RX_RXLPF_Q_BW		0x60
+#define B2056_RX_RXLPF_HP_CORNER_BW	0x61
+#define B2056_RX_RXLPF_RCCAL_HPC	0x62
+#define B2056_RX_RXHPF_OFF0		0x63
+#define B2056_RX_RXHPF_OFF1		0x64
+#define B2056_RX_RXHPF_OFF2		0x65
+#define B2056_RX_RXHPF_OFF3		0x66
+#define B2056_RX_RXHPF_OFF4		0x67
+#define B2056_RX_RXHPF_OFF5		0x68
+#define B2056_RX_RXHPF_OFF6		0x69
+#define B2056_RX_RXHPF_OFF7		0x6A
+#define B2056_RX_RXLPF_RCCAL_LPC	0x6B
+#define B2056_RX_RXLPF_OFF_0		0x6C
+#define B2056_RX_RXLPF_OFF_1		0x6D
+#define B2056_RX_RXLPF_OFF_2		0x6E
+#define B2056_RX_RXLPF_OFF_3		0x6F
+#define B2056_RX_RXLPF_OFF_4		0x70
+#define B2056_RX_UNUSED			0x71
+#define B2056_RX_VGA_MASTER		0x72
+#define B2056_RX_VGA_BIAS		0x73
+#define B2056_RX_VGA_BIAS_DCCANCEL	0x74
+#define B2056_RX_VGA_GAIN		0x75
+#define B2056_RX_VGA_HP_CORNER_BW	0x76
+#define B2056_RX_VGABUF_BIAS		0x77
+#define B2056_RX_VGABUF_GAIN_BW		0x78
+#define B2056_RX_TXFBMIX_A		0x79
+#define B2056_RX_TXFBMIX_G		0x7A
+#define B2056_RX_RXSPARE1		0x7B
+#define B2056_RX_RXSPARE2		0x7C
+#define B2056_RX_RXSPARE3		0x7D
+#define B2056_RX_RXSPARE4		0x7E
+#define B2056_RX_RXSPARE5		0x7F
+#define B2056_RX_RXSPARE6		0x80
+#define B2056_RX_RXSPARE7		0x81
+#define B2056_RX_RXSPARE8		0x82
+#define B2056_RX_RXSPARE9		0x83
+#define B2056_RX_RXSPARE10		0x84
+#define B2056_RX_RXSPARE11		0x85
+#define B2056_RX_RXSPARE12		0x86
+#define B2056_RX_RXSPARE13		0x87
+#define B2056_RX_RXSPARE14		0x88
+#define B2056_RX_RXSPARE15		0x89
+#define B2056_RX_RXSPARE16		0x8A
+#define B2056_RX_STATUS_LNAA_GAIN	0x8B
+#define B2056_RX_STATUS_LNAG_GAIN	0x8C
+#define B2056_RX_STATUS_MIXTIA_GAIN	0x8D
+#define B2056_RX_STATUS_RXLPF_GAIN	0x8E
+#define B2056_RX_STATUS_VGA_BUF_GAIN	0x8F
+#define B2056_RX_STATUS_RXLPF_Q		0x90
+#define B2056_RX_STATUS_RXLPF_BUF_BW	0x91
+#define B2056_RX_STATUS_RXLPF_VGA_HPC	0x92
+#define B2056_RX_STATUS_RXLPF_RC	0x93
+#define B2056_RX_STATUS_HPC_RC		0x94
+
+#define B2056_LNA1_A_PU			0x01
+#define B2056_LNA2_A_PU			0x02
+#define B2056_LNA1_G_PU			0x01
+#define B2056_LNA2_G_PU			0x02
+#define B2056_MIXA_PU_I			0x01
+#define B2056_MIXA_PU_Q			0x02
+#define B2056_MIXA_PU_GM		0x10
+#define B2056_MIXG_PU_I			0x01
+#define B2056_MIXG_PU_Q			0x02
+#define B2056_MIXG_PU_GM		0x10
+#define B2056_TIA_PU			0x01
+#define B2056_BB_LPF_PU			0x20
+#define B2056_W1_PU			0x02
+#define B2056_W2_PU			0x04
+#define B2056_NB_PU			0x08
+#define B2056_RSSI_W1_SEL		0x02
+#define B2056_RSSI_W2_SEL		0x04
+#define B2056_RSSI_NB_SEL		0x08
+#define B2056_VCM_MASK			0x1C
+#define B2056_RSSI_VCM_SHIFT		0x02
+
+#define B2056_SYN			(0x0 << 12)
+#define B2056_TX0			(0x2 << 12)
+#define B2056_TX1			(0x3 << 12)
+#define B2056_RX0			(0x6 << 12)
+#define B2056_RX1			(0x7 << 12)
+#define B2056_ALLTX			(0xE << 12)
+#define B2056_ALLRX			(0xF << 12)
+
+#define B2056_SYN_RESERVED_ADDR0	0x00
+#define B2056_SYN_IDCODE		0x01
+#define B2056_SYN_RESERVED_ADDR2	0x02
+#define B2056_SYN_RESERVED_ADDR3	0x03
+#define B2056_SYN_RESERVED_ADDR4	0x04
+#define B2056_SYN_RESERVED_ADDR5	0x05
+#define B2056_SYN_RESERVED_ADDR6	0x06
+#define B2056_SYN_RESERVED_ADDR7	0x07
+#define B2056_SYN_COM_CTRL		0x08
+#define B2056_SYN_COM_PU		0x09
+#define B2056_SYN_COM_OVR		0x0A
+#define B2056_SYN_COM_RESET		0x0B
+#define B2056_SYN_COM_RCAL		0x0C
+#define B2056_SYN_COM_RC_RXLPF		0x0D
+#define B2056_SYN_COM_RC_TXLPF		0x0E
+#define B2056_SYN_COM_RC_RXHPF		0x0F
+#define B2056_SYN_RESERVED_ADDR16	0x10
+#define B2056_SYN_RESERVED_ADDR17	0x11
+#define B2056_SYN_RESERVED_ADDR18	0x12
+#define B2056_SYN_RESERVED_ADDR19	0x13
+#define B2056_SYN_RESERVED_ADDR20	0x14
+#define B2056_SYN_RESERVED_ADDR21	0x15
+#define B2056_SYN_RESERVED_ADDR22	0x16
+#define B2056_SYN_RESERVED_ADDR23	0x17
+#define B2056_SYN_RESERVED_ADDR24	0x18
+#define B2056_SYN_RESERVED_ADDR25	0x19
+#define B2056_SYN_RESERVED_ADDR26	0x1A
+#define B2056_SYN_RESERVED_ADDR27	0x1B
+#define B2056_SYN_RESERVED_ADDR28	0x1C
+#define B2056_SYN_RESERVED_ADDR29	0x1D
+#define B2056_SYN_RESERVED_ADDR30	0x1E
+#define B2056_SYN_RESERVED_ADDR31	0x1F
+#define B2056_SYN_GPIO_MASTER1		0x20
+#define B2056_SYN_GPIO_MASTER2		0x21
+#define B2056_SYN_TOPBIAS_MASTER	0x22
+#define B2056_SYN_TOPBIAS_RCAL		0x23
+#define B2056_SYN_AFEREG		0x24
+#define B2056_SYN_TEMPPROCSENSE		0x25
+#define B2056_SYN_TEMPPROCSENSEIDAC	0x26
+#define B2056_SYN_TEMPPROCSENSERCAL	0x27
+#define B2056_SYN_LPO			0x28
+#define B2056_SYN_VDDCAL_MASTER		0x29
+#define B2056_SYN_VDDCAL_IDAC		0x2A
+#define B2056_SYN_VDDCAL_STATUS		0x2B
+#define B2056_SYN_RCAL_MASTER		0x2C
+#define B2056_SYN_RCAL_CODE_OUT		0x2D
+#define B2056_SYN_RCCAL_CTRL0		0x2E
+#define B2056_SYN_RCCAL_CTRL1		0x2F
+#define B2056_SYN_RCCAL_CTRL2		0x30
+#define B2056_SYN_RCCAL_CTRL3		0x31
+#define B2056_SYN_RCCAL_CTRL4		0x32
+#define B2056_SYN_RCCAL_CTRL5		0x33
+#define B2056_SYN_RCCAL_CTRL6		0x34
+#define B2056_SYN_RCCAL_CTRL7		0x35
+#define B2056_SYN_RCCAL_CTRL8		0x36
+#define B2056_SYN_RCCAL_CTRL9		0x37
+#define B2056_SYN_RCCAL_CTRL10		0x38
+#define B2056_SYN_RCCAL_CTRL11		0x39
+#define B2056_SYN_ZCAL_SPARE1		0x3A
+#define B2056_SYN_ZCAL_SPARE2		0x3B
+#define B2056_SYN_PLL_MAST1		0x3C
+#define B2056_SYN_PLL_MAST2		0x3D
+#define B2056_SYN_PLL_MAST3		0x3E
+#define B2056_SYN_PLL_BIAS_RESET	0x3F
+#define B2056_SYN_PLL_XTAL0		0x40
+#define B2056_SYN_PLL_XTAL1		0x41
+#define B2056_SYN_PLL_XTAL3		0x42
+#define B2056_SYN_PLL_XTAL4		0x43
+#define B2056_SYN_PLL_XTAL5		0x44
+#define B2056_SYN_PLL_XTAL6		0x45
+#define B2056_SYN_PLL_REFDIV		0x46
+#define B2056_SYN_PLL_PFD		0x47
+#define B2056_SYN_PLL_CP1		0x48
+#define B2056_SYN_PLL_CP2		0x49
+#define B2056_SYN_PLL_CP3		0x4A
+#define B2056_SYN_PLL_LOOPFILTER1	0x4B
+#define B2056_SYN_PLL_LOOPFILTER2	0x4C
+#define B2056_SYN_PLL_LOOPFILTER3	0x4D
+#define B2056_SYN_PLL_LOOPFILTER4	0x4E
+#define B2056_SYN_PLL_LOOPFILTER5	0x4F
+#define B2056_SYN_PLL_MMD1		0x50
+#define B2056_SYN_PLL_MMD2		0x51
+#define B2056_SYN_PLL_VCO1		0x52
+#define B2056_SYN_PLL_VCO2		0x53
+#define B2056_SYN_PLL_MONITOR1		0x54
+#define B2056_SYN_PLL_MONITOR2		0x55
+#define B2056_SYN_PLL_VCOCAL1		0x56
+#define B2056_SYN_PLL_VCOCAL2		0x57
+#define B2056_SYN_PLL_VCOCAL4		0x58
+#define B2056_SYN_PLL_VCOCAL5		0x59
+#define B2056_SYN_PLL_VCOCAL6		0x5A
+#define B2056_SYN_PLL_VCOCAL7		0x5B
+#define B2056_SYN_PLL_VCOCAL8		0x5C
+#define B2056_SYN_PLL_VCOCAL9		0x5D
+#define B2056_SYN_PLL_VCOCAL10		0x5E
+#define B2056_SYN_PLL_VCOCAL11		0x5F
+#define B2056_SYN_PLL_VCOCAL12		0x60
+#define B2056_SYN_PLL_VCOCAL13		0x61
+#define B2056_SYN_PLL_VREG		0x62
+#define B2056_SYN_PLL_STATUS1		0x63
+#define B2056_SYN_PLL_STATUS2		0x64
+#define B2056_SYN_PLL_STATUS3		0x65
+#define B2056_SYN_LOGEN_PU0		0x66
+#define B2056_SYN_LOGEN_PU1		0x67
+#define B2056_SYN_LOGEN_PU2		0x68
+#define B2056_SYN_LOGEN_PU3		0x69
+#define B2056_SYN_LOGEN_PU5		0x6A
+#define B2056_SYN_LOGEN_PU6		0x6B
+#define B2056_SYN_LOGEN_PU7		0x6C
+#define B2056_SYN_LOGEN_PU8		0x6D
+#define B2056_SYN_LOGEN_BIAS_RESET	0x6E
+#define B2056_SYN_LOGEN_RCCR1		0x6F
+#define B2056_SYN_LOGEN_VCOBUF1		0x70
+#define B2056_SYN_LOGEN_MIXER1		0x71
+#define B2056_SYN_LOGEN_MIXER2		0x72
+#define B2056_SYN_LOGEN_BUF1		0x73
+#define B2056_SYN_LOGENBUF2		0x74
+#define B2056_SYN_LOGEN_BUF3		0x75
+#define B2056_SYN_LOGEN_BUF4		0x76
+#define B2056_SYN_LOGEN_DIV1		0x77
+#define B2056_SYN_LOGEN_DIV2		0x78
+#define B2056_SYN_LOGEN_DIV3		0x79
+#define B2056_SYN_LOGEN_ACL1		0x7A
+#define B2056_SYN_LOGEN_ACL2		0x7B
+#define B2056_SYN_LOGEN_ACL3		0x7C
+#define B2056_SYN_LOGEN_ACL4		0x7D
+#define B2056_SYN_LOGEN_ACL5		0x7E
+#define B2056_SYN_LOGEN_ACL6		0x7F
+#define B2056_SYN_LOGEN_ACLOUT		0x80
+#define B2056_SYN_LOGEN_ACLCAL1		0x81
+#define B2056_SYN_LOGEN_ACLCAL2		0x82
+#define B2056_SYN_LOGEN_ACLCAL3		0x83
+#define B2056_SYN_CALEN			0x84
+#define B2056_SYN_LOGEN_PEAKDET1	0x85
+#define B2056_SYN_LOGEN_CORE_ACL_OVR	0x86
+#define B2056_SYN_LOGEN_RX_DIFF_ACL_OVR	0x87
+#define B2056_SYN_LOGEN_TX_DIFF_ACL_OVR	0x88
+#define B2056_SYN_LOGEN_RX_CMOS_ACL_OVR	0x89
+#define B2056_SYN_LOGEN_TX_CMOS_ACL_OVR	0x8A
+#define B2056_SYN_LOGEN_VCOBUF2		0x8B
+#define B2056_SYN_LOGEN_MIXER3		0x8C
+#define B2056_SYN_LOGEN_BUF5		0x8D
+#define B2056_SYN_LOGEN_BUF6		0x8E
+#define B2056_SYN_LOGEN_CBUFRX1		0x8F
+#define B2056_SYN_LOGEN_CBUFRX2		0x90
+#define B2056_SYN_LOGEN_CBUFRX3		0x91
+#define B2056_SYN_LOGEN_CBUFRX4		0x92
+#define B2056_SYN_LOGEN_CBUFTX1		0x93
+#define B2056_SYN_LOGEN_CBUFTX2		0x94
+#define B2056_SYN_LOGEN_CBUFTX3		0x95
+#define B2056_SYN_LOGEN_CBUFTX4		0x96
+#define B2056_SYN_LOGEN_CMOSRX1		0x97
+#define B2056_SYN_LOGEN_CMOSRX2		0x98
+#define B2056_SYN_LOGEN_CMOSRX3		0x99
+#define B2056_SYN_LOGEN_CMOSRX4		0x9A
+#define B2056_SYN_LOGEN_CMOSTX1		0x9B
+#define B2056_SYN_LOGEN_CMOSTX2		0x9C
+#define B2056_SYN_LOGEN_CMOSTX3		0x9D
+#define B2056_SYN_LOGEN_CMOSTX4		0x9E
+#define B2056_SYN_LOGEN_VCOBUF2_OVRVAL	0x9F
+#define B2056_SYN_LOGEN_MIXER3_OVRVAL	0xA0
+#define B2056_SYN_LOGEN_BUF5_OVRVAL	0xA1
+#define B2056_SYN_LOGEN_BUF6_OVRVAL	0xA2
+#define B2056_SYN_LOGEN_CBUFRX1_OVRVAL	0xA3
+#define B2056_SYN_LOGEN_CBUFRX2_OVRVAL	0xA4
+#define B2056_SYN_LOGEN_CBUFRX3_OVRVAL	0xA5
+#define B2056_SYN_LOGEN_CBUFRX4_OVRVAL	0xA6
+#define B2056_SYN_LOGEN_CBUFTX1_OVRVAL	0xA7
+#define B2056_SYN_LOGEN_CBUFTX2_OVRVAL	0xA8
+#define B2056_SYN_LOGEN_CBUFTX3_OVRVAL	0xA9
+#define B2056_SYN_LOGEN_CBUFTX4_OVRVAL	0xAA
+#define B2056_SYN_LOGEN_CMOSRX1_OVRVAL	0xAB
+#define B2056_SYN_LOGEN_CMOSRX2_OVRVAL	0xAC
+#define B2056_SYN_LOGEN_CMOSRX3_OVRVAL	0xAD
+#define B2056_SYN_LOGEN_CMOSRX4_OVRVAL	0xAE
+#define B2056_SYN_LOGEN_CMOSTX1_OVRVAL	0xAF
+#define B2056_SYN_LOGEN_CMOSTX2_OVRVAL	0xB0
+#define B2056_SYN_LOGEN_CMOSTX3_OVRVAL	0xB1
+#define B2056_SYN_LOGEN_CMOSTX4_OVRVAL	0xB2
+#define B2056_SYN_LOGEN_ACL_WAITCNT	0xB3
+#define B2056_SYN_LOGEN_CORE_CALVALID	0xB4
+#define B2056_SYN_LOGEN_RX_CMOS_CALVALID	0xB5
+#define B2056_SYN_LOGEN_TX_CMOS_VALID	0xB6
+
+#define B2056_TX_RESERVED_ADDR0		0x00
+#define B2056_TX_IDCODE			0x01
+#define B2056_TX_RESERVED_ADDR2		0x02
+#define B2056_TX_RESERVED_ADDR3		0x03
+#define B2056_TX_RESERVED_ADDR4		0x04
+#define B2056_TX_RESERVED_ADDR5		0x05
+#define B2056_TX_RESERVED_ADDR6		0x06
+#define B2056_TX_RESERVED_ADDR7		0x07
+#define B2056_TX_COM_CTRL		0x08
+#define B2056_TX_COM_PU			0x09
+#define B2056_TX_COM_OVR		0x0A
+#define B2056_TX_COM_RESET		0x0B
+#define B2056_TX_COM_RCAL		0x0C
+#define B2056_TX_COM_RC_RXLPF		0x0D
+#define B2056_TX_COM_RC_TXLPF		0x0E
+#define B2056_TX_COM_RC_RXHPF		0x0F
+#define B2056_TX_RESERVED_ADDR16	0x10
+#define B2056_TX_RESERVED_ADDR17	0x11
+#define B2056_TX_RESERVED_ADDR18	0x12
+#define B2056_TX_RESERVED_ADDR19	0x13
+#define B2056_TX_RESERVED_ADDR20	0x14
+#define B2056_TX_RESERVED_ADDR21	0x15
+#define B2056_TX_RESERVED_ADDR22	0x16
+#define B2056_TX_RESERVED_ADDR23	0x17
+#define B2056_TX_RESERVED_ADDR24	0x18
+#define B2056_TX_RESERVED_ADDR25	0x19
+#define B2056_TX_RESERVED_ADDR26	0x1A
+#define B2056_TX_RESERVED_ADDR27	0x1B
+#define B2056_TX_RESERVED_ADDR28	0x1C
+#define B2056_TX_RESERVED_ADDR29	0x1D
+#define B2056_TX_RESERVED_ADDR30	0x1E
+#define B2056_TX_RESERVED_ADDR31	0x1F
+#define B2056_TX_IQCAL_GAIN_BW		0x20
+#define B2056_TX_LOFT_FINE_I		0x21
+#define B2056_TX_LOFT_FINE_Q		0x22
+#define B2056_TX_LOFT_COARSE_I		0x23
+#define B2056_TX_LOFT_COARSE_Q		0x24
+#define B2056_TX_TX_COM_MASTER1		0x25
+#define B2056_TX_TX_COM_MASTER2		0x26
+#define B2056_TX_RXIQCAL_TXMUX		0x27
+#define B2056_TX_TX_SSI_MASTER		0x28
+#define B2056_TX_IQCAL_VCM_HG		0x29
+#define B2056_TX_IQCAL_IDAC		0x2A
+#define B2056_TX_TSSI_VCM		0x2B
+#define B2056_TX_TX_AMP_DET		0x2C
+#define B2056_TX_TX_SSI_MUX		0x2D
+#define B2056_TX_TSSIA			0x2E
+#define B2056_TX_TSSIG			0x2F
+#define B2056_TX_TSSI_MISC1		0x30
+#define B2056_TX_TSSI_MISC2		0x31
+#define B2056_TX_TSSI_MISC3		0x32
+#define B2056_TX_PA_SPARE1		0x33
+#define B2056_TX_PA_SPARE2		0x34
+#define B2056_TX_INTPAA_MASTER		0x35
+#define B2056_TX_INTPAA_GAIN		0x36
+#define B2056_TX_INTPAA_BOOST_TUNE	0x37
+#define B2056_TX_INTPAA_IAUX_STAT	0x38
+#define B2056_TX_INTPAA_IAUX_DYN	0x39
+#define B2056_TX_INTPAA_IMAIN_STAT	0x3A
+#define B2056_TX_INTPAA_IMAIN_DYN	0x3B
+#define B2056_TX_INTPAA_CASCBIAS	0x3C
+#define B2056_TX_INTPAA_PASLOPE		0x3D
+#define B2056_TX_INTPAA_PA_MISC		0x3E
+#define B2056_TX_INTPAG_MASTER		0x3F
+#define B2056_TX_INTPAG_GAIN		0x40
+#define B2056_TX_INTPAG_BOOST_TUNE	0x41
+#define B2056_TX_INTPAG_IAUX_STAT	0x42
+#define B2056_TX_INTPAG_IAUX_DYN	0x43
+#define B2056_TX_INTPAG_IMAIN_STAT	0x44
+#define B2056_TX_INTPAG_IMAIN_DYN	0x45
+#define B2056_TX_INTPAG_CASCBIAS	0x46
+#define B2056_TX_INTPAG_PASLOPE		0x47
+#define B2056_TX_INTPAG_PA_MISC		0x48
+#define B2056_TX_PADA_MASTER		0x49
+#define B2056_TX_PADA_IDAC		0x4A
+#define B2056_TX_PADA_CASCBIAS		0x4B
+#define B2056_TX_PADA_GAIN		0x4C
+#define B2056_TX_PADA_BOOST_TUNE	0x4D
+#define B2056_TX_PADA_SLOPE		0x4E
+#define B2056_TX_PADG_MASTER		0x4F
+#define B2056_TX_PADG_IDAC		0x50
+#define B2056_TX_PADG_CASCBIAS		0x51
+#define B2056_TX_PADG_GAIN		0x52
+#define B2056_TX_PADG_BOOST_TUNE	0x53
+#define B2056_TX_PADG_SLOPE		0x54
+#define B2056_TX_PGAA_MASTER		0x55
+#define B2056_TX_PGAA_IDAC		0x56
+#define B2056_TX_PGAA_GAIN		0x57
+#define B2056_TX_PGAA_BOOST_TUNE	0x58
+#define B2056_TX_PGAA_SLOPE		0x59
+#define B2056_TX_PGAA_MISC		0x5A
+#define B2056_TX_PGAG_MASTER		0x5B
+#define B2056_TX_PGAG_IDAC		0x5C
+#define B2056_TX_PGAG_GAIN		0x5D
+#define B2056_TX_PGAG_BOOST_TUNE	0x5E
+#define B2056_TX_PGAG_SLOPE		0x5F
+#define B2056_TX_PGAG_MISC		0x60
+#define B2056_TX_MIXA_MASTER		0x61
+#define B2056_TX_MIXA_BOOST_TUNE	0x62
+#define B2056_TX_MIXG			0x63
+#define B2056_TX_MIXG_BOOST_TUNE	0x64
+#define B2056_TX_BB_GM_MASTER		0x65
+#define B2056_TX_GMBB_GM		0x66
+#define B2056_TX_GMBB_IDAC		0x67
+#define B2056_TX_TXLPF_MASTER		0x68
+#define B2056_TX_TXLPF_RCCAL		0x69
+#define B2056_TX_TXLPF_RCCAL_OFF0	0x6A
+#define B2056_TX_TXLPF_RCCAL_OFF1	0x6B
+#define B2056_TX_TXLPF_RCCAL_OFF2	0x6C
+#define B2056_TX_TXLPF_RCCAL_OFF3	0x6D
+#define B2056_TX_TXLPF_RCCAL_OFF4	0x6E
+#define B2056_TX_TXLPF_RCCAL_OFF5	0x6F
+#define B2056_TX_TXLPF_RCCAL_OFF6	0x70
+#define B2056_TX_TXLPF_BW		0x71
+#define B2056_TX_TXLPF_GAIN		0x72
+#define B2056_TX_TXLPF_IDAC		0x73
+#define B2056_TX_TXLPF_IDAC_0		0x74
+#define B2056_TX_TXLPF_IDAC_1		0x75
+#define B2056_TX_TXLPF_IDAC_2		0x76
+#define B2056_TX_TXLPF_IDAC_3		0x77
+#define B2056_TX_TXLPF_IDAC_4		0x78
+#define B2056_TX_TXLPF_IDAC_5		0x79
+#define B2056_TX_TXLPF_IDAC_6		0x7A
+#define B2056_TX_TXLPF_OPAMP_IDAC	0x7B
+#define B2056_TX_TXLPF_MISC		0x7C
+#define B2056_TX_TXSPARE1		0x7D
+#define B2056_TX_TXSPARE2		0x7E
+#define B2056_TX_TXSPARE3		0x7F
+#define B2056_TX_TXSPARE4		0x80
+#define B2056_TX_TXSPARE5		0x81
+#define B2056_TX_TXSPARE6		0x82
+#define B2056_TX_TXSPARE7		0x83
+#define B2056_TX_TXSPARE8		0x84
+#define B2056_TX_TXSPARE9		0x85
+#define B2056_TX_TXSPARE10		0x86
+#define B2056_TX_TXSPARE11		0x87
+#define B2056_TX_TXSPARE12		0x88
+#define B2056_TX_TXSPARE13		0x89
+#define B2056_TX_TXSPARE14		0x8A
+#define B2056_TX_TXSPARE15		0x8B
+#define B2056_TX_TXSPARE16		0x8C
+#define B2056_TX_STATUS_INTPA_GAIN	0x8D
+#define B2056_TX_STATUS_PAD_GAIN	0x8E
+#define B2056_TX_STATUS_PGA_GAIN	0x8F
+#define B2056_TX_STATUS_GM_TXLPF_GAIN	0x90
+#define B2056_TX_STATUS_TXLPF_BW	0x91
+#define B2056_TX_STATUS_TXLPF_RC	0x92
+#define B2056_TX_GMBB_IDAC0		0x93
+#define B2056_TX_GMBB_IDAC1		0x94
+#define B2056_TX_GMBB_IDAC2		0x95
+#define B2056_TX_GMBB_IDAC3		0x96
+#define B2056_TX_GMBB_IDAC4		0x97
+#define B2056_TX_GMBB_IDAC5		0x98
+#define B2056_TX_GMBB_IDAC6		0x99
+#define B2056_TX_GMBB_IDAC7		0x9A
+
+#define B2056_RX_RESERVED_ADDR0		0x00
+#define B2056_RX_IDCODE			0x01
+#define B2056_RX_RESERVED_ADDR2		0x02
+#define B2056_RX_RESERVED_ADDR3		0x03
+#define B2056_RX_RESERVED_ADDR4		0x04
+#define B2056_RX_RESERVED_ADDR5		0x05
+#define B2056_RX_RESERVED_ADDR6		0x06
+#define B2056_RX_RESERVED_ADDR7		0x07
+#define B2056_RX_COM_CTRL		0x08
+#define B2056_RX_COM_PU			0x09
+#define B2056_RX_COM_OVR		0x0A
+#define B2056_RX_COM_RESET		0x0B
+#define B2056_RX_COM_RCAL		0x0C
+#define B2056_RX_COM_RC_RXLPF		0x0D
+#define B2056_RX_COM_RC_TXLPF		0x0E
+#define B2056_RX_COM_RC_RXHPF		0x0F
+#define B2056_RX_RESERVED_ADDR16	0x10
+#define B2056_RX_RESERVED_ADDR17	0x11
+#define B2056_RX_RESERVED_ADDR18	0x12
+#define B2056_RX_RESERVED_ADDR19	0x13
+#define B2056_RX_RESERVED_ADDR20	0x14
+#define B2056_RX_RESERVED_ADDR21	0x15
+#define B2056_RX_RESERVED_ADDR22	0x16
+#define B2056_RX_RESERVED_ADDR23	0x17
+#define B2056_RX_RESERVED_ADDR24	0x18
+#define B2056_RX_RESERVED_ADDR25	0x19
+#define B2056_RX_RESERVED_ADDR26	0x1A
+#define B2056_RX_RESERVED_ADDR27	0x1B
+#define B2056_RX_RESERVED_ADDR28	0x1C
+#define B2056_RX_RESERVED_ADDR29	0x1D
+#define B2056_RX_RESERVED_ADDR30	0x1E
+#define B2056_RX_RESERVED_ADDR31	0x1F
+#define B2056_RX_RXIQCAL_RXMUX		0x20
+#define B2056_RX_RSSI_PU		0x21
+#define B2056_RX_RSSI_SEL		0x22
+#define B2056_RX_RSSI_GAIN		0x23
+#define B2056_RX_RSSI_NB_IDAC		0x24
+#define B2056_RX_RSSI_WB2I_IDAC_1	0x25
+#define B2056_RX_RSSI_WB2I_IDAC_2	0x26
+#define B2056_RX_RSSI_WB2Q_IDAC_1	0x27
+#define B2056_RX_RSSI_WB2Q_IDAC_2	0x28
+#define B2056_RX_RSSI_POLE		0x29
+#define B2056_RX_RSSI_WB1_IDAC		0x2A
+#define B2056_RX_RSSI_MISC		0x2B
+#define B2056_RX_LNAA_MASTER		0x2C
+#define B2056_RX_LNAA_TUNE		0x2D
+#define B2056_RX_LNAA_GAIN		0x2E
+#define B2056_RX_LNA_A_SLOPE		0x2F
+#define B2056_RX_BIASPOLE_LNAA1_IDAC	0x30
+#define B2056_RX_LNAA2_IDAC		0x31
+#define B2056_RX_LNA1A_MISC		0x32
+#define B2056_RX_LNAG_MASTER		0x33
+#define B2056_RX_LNAG_TUNE		0x34
+#define B2056_RX_LNAG_GAIN		0x35
+#define B2056_RX_LNA_G_SLOPE		0x36
+#define B2056_RX_BIASPOLE_LNAG1_IDAC	0x37
+#define B2056_RX_LNAG2_IDAC		0x38
+#define B2056_RX_LNA1G_MISC		0x39
+#define B2056_RX_MIXA_MASTER		0x3A
+#define B2056_RX_MIXA_VCM		0x3B
+#define B2056_RX_MIXA_CTRLPTAT		0x3C
+#define B2056_RX_MIXA_LOB_BIAS		0x3D
+#define B2056_RX_MIXA_CORE_IDAC		0x3E
+#define B2056_RX_MIXA_CMFB_IDAC		0x3F
+#define B2056_RX_MIXA_BIAS_AUX		0x40
+#define B2056_RX_MIXA_BIAS_MAIN		0x41
+#define B2056_RX_MIXA_BIAS_MISC		0x42
+#define B2056_RX_MIXA_MAST_BIAS		0x43
+#define B2056_RX_MIXG_MASTER		0x44
+#define B2056_RX_MIXG_VCM		0x45
+#define B2056_RX_MIXG_CTRLPTAT		0x46
+#define B2056_RX_MIXG_LOB_BIAS		0x47
+#define B2056_RX_MIXG_CORE_IDAC		0x48
+#define B2056_RX_MIXG_CMFB_IDAC		0x49
+#define B2056_RX_MIXG_BIAS_AUX		0x4A
+#define B2056_RX_MIXG_BIAS_MAIN		0x4B
+#define B2056_RX_MIXG_BIAS_MISC		0x4C
+#define B2056_RX_MIXG_MAST_BIAS		0x4D
+#define B2056_RX_TIA_MASTER		0x4E
+#define B2056_RX_TIA_IOPAMP		0x4F
+#define B2056_RX_TIA_QOPAMP		0x50
+#define B2056_RX_TIA_IMISC		0x51
+#define B2056_RX_TIA_QMISC		0x52
+#define B2056_RX_TIA_GAIN		0x53
+#define B2056_RX_TIA_SPARE1		0x54
+#define B2056_RX_TIA_SPARE2		0x55
+#define B2056_RX_BB_LPF_MASTER		0x56
+#define B2056_RX_AACI_MASTER		0x57
+#define B2056_RX_RXLPF_IDAC		0x58
+#define B2056_RX_RXLPF_OPAMPBIAS_LOWQ	0x59
+#define B2056_RX_RXLPF_OPAMPBIAS_HIGHQ	0x5A
+#define B2056_RX_RXLPF_BIAS_DCCANCEL	0x5B
+#define B2056_RX_RXLPF_OUTVCM		0x5C
+#define B2056_RX_RXLPF_INVCM_BODY	0x5D
+#define B2056_RX_RXLPF_CC_OP		0x5E
+#define B2056_RX_RXLPF_GAIN		0x5F
+#define B2056_RX_RXLPF_Q_BW		0x60
+#define B2056_RX_RXLPF_HP_CORNER_BW	0x61
+#define B2056_RX_RXLPF_RCCAL_HPC	0x62
+#define B2056_RX_RXHPF_OFF0		0x63
+#define B2056_RX_RXHPF_OFF1		0x64
+#define B2056_RX_RXHPF_OFF2		0x65
+#define B2056_RX_RXHPF_OFF3		0x66
+#define B2056_RX_RXHPF_OFF4		0x67
+#define B2056_RX_RXHPF_OFF5		0x68
+#define B2056_RX_RXHPF_OFF6		0x69
+#define B2056_RX_RXHPF_OFF7		0x6A
+#define B2056_RX_RXLPF_RCCAL_LPC	0x6B
+#define B2056_RX_RXLPF_OFF_0		0x6C
+#define B2056_RX_RXLPF_OFF_1		0x6D
+#define B2056_RX_RXLPF_OFF_2		0x6E
+#define B2056_RX_RXLPF_OFF_3		0x6F
+#define B2056_RX_RXLPF_OFF_4		0x70
+#define B2056_RX_UNUSED			0x71
+#define B2056_RX_VGA_MASTER		0x72
+#define B2056_RX_VGA_BIAS		0x73
+#define B2056_RX_VGA_BIAS_DCCANCEL	0x74
+#define B2056_RX_VGA_GAIN		0x75
+#define B2056_RX_VGA_HP_CORNER_BW	0x76
+#define B2056_RX_VGABUF_BIAS		0x77
+#define B2056_RX_VGABUF_GAIN_BW		0x78
+#define B2056_RX_TXFBMIX_A		0x79
+#define B2056_RX_TXFBMIX_G		0x7A
+#define B2056_RX_RXSPARE1		0x7B
+#define B2056_RX_RXSPARE2		0x7C
+#define B2056_RX_RXSPARE3		0x7D
+#define B2056_RX_RXSPARE4		0x7E
+#define B2056_RX_RXSPARE5		0x7F
+#define B2056_RX_RXSPARE6		0x80
+#define B2056_RX_RXSPARE7		0x81
+#define B2056_RX_RXSPARE8		0x82
+#define B2056_RX_RXSPARE9		0x83
+#define B2056_RX_RXSPARE10		0x84
+#define B2056_RX_RXSPARE11		0x85
+#define B2056_RX_RXSPARE12		0x86
+#define B2056_RX_RXSPARE13		0x87
+#define B2056_RX_RXSPARE14		0x88
+#define B2056_RX_RXSPARE15		0x89
+#define B2056_RX_RXSPARE16		0x8A
+#define B2056_RX_STATUS_LNAA_GAIN	0x8B
+#define B2056_RX_STATUS_LNAG_GAIN	0x8C
+#define B2056_RX_STATUS_MIXTIA_GAIN	0x8D
+#define B2056_RX_STATUS_RXLPF_GAIN	0x8E
+#define B2056_RX_STATUS_VGA_BUF_GAIN	0x8F
+#define B2056_RX_STATUS_RXLPF_Q		0x90
+#define B2056_RX_STATUS_RXLPF_BUF_BW	0x91
+#define B2056_RX_STATUS_RXLPF_VGA_HPC	0x92
+#define B2056_RX_STATUS_RXLPF_RC	0x93
+#define B2056_RX_STATUS_HPC_RC		0x94
+
+#define B2056_LNA1_A_PU			0x01
+#define B2056_LNA2_A_PU			0x02
+#define B2056_LNA1_G_PU			0x01
+#define B2056_LNA2_G_PU			0x02
+#define B2056_MIXA_PU_I			0x01
+#define B2056_MIXA_PU_Q			0x02
+#define B2056_MIXA_PU_GM		0x10
+#define B2056_MIXG_PU_I			0x01
+#define B2056_MIXG_PU_Q			0x02
+#define B2056_MIXG_PU_GM		0x10
+#define B2056_TIA_PU			0x01
+#define B2056_BB_LPF_PU			0x20
+#define B2056_W1_PU			0x02
+#define B2056_W2_PU			0x04
+#define B2056_NB_PU			0x08
+#define B2056_RSSI_W1_SEL		0x02
+#define B2056_RSSI_W2_SEL		0x04
+#define B2056_RSSI_NB_SEL		0x08
+#define B2056_VCM_MASK			0x1C
+#define B2056_RSSI_VCM_SHIFT		0x02
+
 struct b43_nphy_channeltab_entry_rev3 {
-	/* The channel number */
-	u8 channel;
 	/* The channel frequency in MHz */
 	u16 freq;
 	/* Radio register values on channelswitch */
-	/* TODO */
+	u8 radio_syn_pll_vcocal1;
+	u8 radio_syn_pll_vcocal2;
+	u8 radio_syn_pll_refdiv;
+	u8 radio_syn_pll_mmd2;
+	u8 radio_syn_pll_mmd1;
+	u8 radio_syn_pll_loopfilter1;
+	u8 radio_syn_pll_loopfilter2;
+	u8 radio_syn_pll_loopfilter3;
+	u8 radio_syn_pll_loopfilter4;
+	u8 radio_syn_pll_loopfilter5;
+	u8 radio_syn_reserved_addr27;
+	u8 radio_syn_reserved_addr28;
+	u8 radio_syn_reserved_addr29;
+	u8 radio_syn_logen_vcobuf1;
+	u8 radio_syn_logen_mixer2;
+	u8 radio_syn_logen_buf3;
+	u8 radio_syn_logen_buf4;
+	u8 radio_rx0_lnaa_tune;
+	u8 radio_rx0_lnag_tune;
+	u8 radio_tx0_intpaa_boost_tune;
+	u8 radio_tx0_intpag_boost_tune;
+	u8 radio_tx0_pada_boost_tune;
+	u8 radio_tx0_padg_boost_tune;
+	u8 radio_tx0_pgaa_boost_tune;
+	u8 radio_tx0_pgag_boost_tune;
+	u8 radio_tx0_mixa_boost_tune;
+	u8 radio_tx0_mixg_boost_tune;
+	u8 radio_rx1_lnaa_tune;
+	u8 radio_rx1_lnag_tune;
+	u8 radio_tx1_intpaa_boost_tune;
+	u8 radio_tx1_intpag_boost_tune;
+	u8 radio_tx1_pada_boost_tune;
+	u8 radio_tx1_padg_boost_tune;
+	u8 radio_tx1_pgaa_boost_tune;
+	u8 radio_tx1_pgag_boost_tune;
+	u8 radio_tx1_mixa_boost_tune;
+	u8 radio_tx1_mixg_boost_tune;
 	/* PHY register values on channelswitch */
 	struct b43_phy_n_sfo_cfg phy_regs;
 };
 
+void b2056_upload_inittabs(struct b43_wldev *dev,
+			   bool ghz5, bool ignore_uploadflag);
+
 #endif /* B43_RADIO_2056_H_ */
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index 78016ae21c5..86bc0a0f735 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -28,23 +28,8 @@
 /* Returns TRUE, if the radio is enabled in hardware. */
 bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
 {
-	if (dev->phy.rev >= 3 || dev->phy.type == B43_PHYTYPE_LP) {
-		if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
-		      & B43_MMIO_RADIO_HWENABLED_HI_MASK))
-			return 1;
-	} else {
-		/* To prevent CPU fault on PPC, do not read a register
-		 * unless the interface is started; however, on resume
-		 * for hibernation, this routine is entered early. When
-		 * that happens, unconditionally return TRUE.
-		 */
-		if (b43_status(dev) < B43_STAT_STARTED)
-			return 1;
-		if (b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
-		    & B43_MMIO_RADIO_HWENABLED_LO_MASK)
-			return 1;
-	}
-	return 0;
+	return !(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
+		& B43_MMIO_RADIO_HWENABLED_HI_MASK);
 }
 
 /* The poll callback for the hardware button. */
diff --git a/drivers/net/wireless/b43/sdio.c b/drivers/net/wireless/b43/sdio.c
index 9a55338d957..09e2dfd7b17 100644
--- a/drivers/net/wireless/b43/sdio.c
+++ b/drivers/net/wireless/b43/sdio.c
@@ -163,6 +163,7 @@ static int b43_sdio_probe(struct sdio_func *func,
 err_free_ssb:
 	kfree(sdio);
 err_disable_func:
+	sdio_claim_host(func);
 	sdio_disable_func(func);
 err_release_host:
 	sdio_release_host(func);
diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c
index d60db078eae..dc8ef09a855 100644
--- a/drivers/net/wireless/b43/tables_nphy.c
+++ b/drivers/net/wireless/b43/tables_nphy.c
@@ -28,41 +28,41 @@
 #include "phy_n.h"
 
 static const u8 b43_ntab_adjustpower0[] = {
-	0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01,
-	0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x03, 0x03,
-	0x04, 0x04, 0x04, 0x04, 0x05, 0x05, 0x05, 0x05,
-	0x06, 0x06, 0x06, 0x06, 0x07, 0x07, 0x07, 0x07,
-	0x08, 0x08, 0x08, 0x08, 0x09, 0x09, 0x09, 0x09,
-	0x0A, 0x0A, 0x0A, 0x0A, 0x0B, 0x0B, 0x0B, 0x0B,
-	0x0C, 0x0C, 0x0C, 0x0C, 0x0D, 0x0D, 0x0D, 0x0D,
-	0x0E, 0x0E, 0x0E, 0x0E, 0x0F, 0x0F, 0x0F, 0x0F,
-	0x10, 0x10, 0x10, 0x10, 0x11, 0x11, 0x11, 0x11,
-	0x12, 0x12, 0x12, 0x12, 0x13, 0x13, 0x13, 0x13,
-	0x14, 0x14, 0x14, 0x14, 0x15, 0x15, 0x15, 0x15,
-	0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x17,
-	0x18, 0x18, 0x18, 0x18, 0x19, 0x19, 0x19, 0x19,
-	0x1A, 0x1A, 0x1A, 0x1A, 0x1B, 0x1B, 0x1B, 0x1B,
-	0x1C, 0x1C, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D,
-	0x1E, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, 0x1F,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
 
 static const u8 b43_ntab_adjustpower1[] = {
-	0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01,
-	0x02, 0x02, 0x02, 0x02, 0x03, 0x03, 0x03, 0x03,
-	0x04, 0x04, 0x04, 0x04, 0x05, 0x05, 0x05, 0x05,
-	0x06, 0x06, 0x06, 0x06, 0x07, 0x07, 0x07, 0x07,
-	0x08, 0x08, 0x08, 0x08, 0x09, 0x09, 0x09, 0x09,
-	0x0A, 0x0A, 0x0A, 0x0A, 0x0B, 0x0B, 0x0B, 0x0B,
-	0x0C, 0x0C, 0x0C, 0x0C, 0x0D, 0x0D, 0x0D, 0x0D,
-	0x0E, 0x0E, 0x0E, 0x0E, 0x0F, 0x0F, 0x0F, 0x0F,
-	0x10, 0x10, 0x10, 0x10, 0x11, 0x11, 0x11, 0x11,
-	0x12, 0x12, 0x12, 0x12, 0x13, 0x13, 0x13, 0x13,
-	0x14, 0x14, 0x14, 0x14, 0x15, 0x15, 0x15, 0x15,
-	0x16, 0x16, 0x16, 0x16, 0x17, 0x17, 0x17, 0x17,
-	0x18, 0x18, 0x18, 0x18, 0x19, 0x19, 0x19, 0x19,
-	0x1A, 0x1A, 0x1A, 0x1A, 0x1B, 0x1B, 0x1B, 0x1B,
-	0x1C, 0x1C, 0x1C, 0x1C, 0x1D, 0x1D, 0x1D, 0x1D,
-	0x1E, 0x1E, 0x1E, 0x1E, 0x1F, 0x1F, 0x1F, 0x1F,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
 
 static const u16 b43_ntab_bdi[] = {
@@ -130,8 +130,8 @@ static const u32 b43_ntab_framestruct[] = {
 	0x09804506, 0x00100030, 0x09804507, 0x00100030,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x08004A0C, 0x00100008, 0x01000A0D, 0x00100028,
-	0x0980450E, 0x00100038, 0x0980450F, 0x00100038,
+	0x08004A0C, 0x00100004, 0x01000A0D, 0x00100024,
+	0x0980450E, 0x00100034, 0x0980450F, 0x00100034,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000A04, 0x00100000, 0x11008A05, 0x00100020,
@@ -202,13 +202,13 @@ static const u32 b43_ntab_framestruct[] = {
 	0x53028A06, 0x01900060, 0x53028A07, 0x01900060,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x4002140C, 0x000F4810, 0x6203140D, 0x00100050,
-	0x53028A0E, 0x01900070, 0x53028A0F, 0x01900070,
+	0x4002140C, 0x000F4808, 0x6203140D, 0x00100048,
+	0x53028A0E, 0x01900068, 0x53028A0F, 0x01900068,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x00000A0C, 0x00100008, 0x11008A0D, 0x00100028,
-	0x1980C50E, 0x00100038, 0x2181050E, 0x00100038,
-	0x2181050E, 0x00100038, 0x0180050C, 0x00100038,
+	0x00000A0C, 0x00100004, 0x11008A0D, 0x00100024,
+	0x1980C50E, 0x00100034, 0x2181050E, 0x00100034,
+	0x2181050E, 0x00100034, 0x0180050C, 0x00100038,
 	0x1180850D, 0x00100038, 0x1181850D, 0x00100038,
 	0x2981450F, 0x01100038, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
@@ -238,9 +238,9 @@ static const u32 b43_ntab_framestruct[] = {
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x4002140C, 0x00100010, 0x0200140D, 0x00100050,
-	0x0B004A0E, 0x01900070, 0x13008A0E, 0x01900070,
-	0x13008A0E, 0x01900070, 0x43020A0C, 0x00100070,
+	0x4002140C, 0x00100008, 0x0200140D, 0x00100048,
+	0x0B004A0E, 0x01900068, 0x13008A0E, 0x01900068,
+	0x13008A0E, 0x01900068, 0x43020A0C, 0x00100070,
 	0x1B00CA0D, 0x00100070, 0x1B014A0D, 0x00100070,
 	0x23010A0F, 0x01500070, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
@@ -337,73 +337,73 @@ static const u32 b43_ntab_framestruct[] = {
 };
 
 static const u32 b43_ntab_gainctl0[] = {
-	0x007F003F, 0x007E013F, 0x007D023E, 0x007C033E,
-	0x007B043D, 0x007A053D, 0x0079063C, 0x0078073C,
-	0x0077083B, 0x0076093B, 0x00750A3A, 0x00740B3A,
-	0x00730C39, 0x00720D39, 0x00710E38, 0x00700F38,
-	0x006F0037, 0x006E0137, 0x006D0236, 0x006C0336,
-	0x006B0435, 0x006A0535, 0x00690634, 0x00680734,
-	0x00670833, 0x00660933, 0x00650A32, 0x00640B32,
-	0x00630C31, 0x00620D31, 0x00610E30, 0x00600F30,
-	0x005F002F, 0x005E012F, 0x005D022E, 0x005C032E,
-	0x005B042D, 0x005A052D, 0x0059062C, 0x0058072C,
-	0x0057082B, 0x0056092B, 0x00550A2A, 0x00540B2A,
-	0x00530C29, 0x00520D29, 0x00510E28, 0x00500F28,
-	0x004F0027, 0x004E0127, 0x004D0226, 0x004C0326,
-	0x004B0425, 0x004A0525, 0x00490624, 0x00480724,
-	0x00470823, 0x00460923, 0x00450A22, 0x00440B22,
-	0x00430C21, 0x00420D21, 0x00410E20, 0x00400F20,
-	0x003F001F, 0x003E011F, 0x003D021E, 0x003C031E,
-	0x003B041D, 0x003A051D, 0x0039061C, 0x0038071C,
-	0x0037081B, 0x0036091B, 0x00350A1A, 0x00340B1A,
-	0x00330C19, 0x00320D19, 0x00310E18, 0x00300F18,
-	0x002F0017, 0x002E0117, 0x002D0216, 0x002C0316,
-	0x002B0415, 0x002A0515, 0x00290614, 0x00280714,
-	0x00270813, 0x00260913, 0x00250A12, 0x00240B12,
-	0x00230C11, 0x00220D11, 0x00210E10, 0x00200F10,
-	0x001F000F, 0x001E010F, 0x001D020E, 0x001C030E,
-	0x001B040D, 0x001A050D, 0x0019060C, 0x0018070C,
-	0x0017080B, 0x0016090B, 0x00150A0A, 0x00140B0A,
-	0x00130C09, 0x00120D09, 0x00110E08, 0x00100F08,
-	0x000F0007, 0x000E0107, 0x000D0206, 0x000C0306,
-	0x000B0405, 0x000A0505, 0x00090604, 0x00080704,
-	0x00070803, 0x00060903, 0x00050A02, 0x00040B02,
-	0x00030C01, 0x00020D01, 0x00010E00, 0x00000F00,
+	0x03CC2B44, 0x03CC2B42, 0x03CC2B40, 0x03CC2B3E,
+	0x03CC2B3D, 0x03CC2B3B, 0x03C82B44, 0x03C82B42,
+	0x03C82B40, 0x03C82B3E, 0x03C82B3D, 0x03C82B3B,
+	0x03C82B39, 0x03C82B38, 0x03C82B36, 0x03C82B34,
+	0x03C42B44, 0x03C42B42, 0x03C42B40, 0x03C42B3E,
+	0x03C42B3D, 0x03C42B3B, 0x03C42B39, 0x03C42B38,
+	0x03C42B36, 0x03C42B34, 0x03C42B33, 0x03C42B32,
+	0x03C42B30, 0x03C42B2F, 0x03C42B2D, 0x03C02B44,
+	0x03C02B42, 0x03C02B40, 0x03C02B3E, 0x03C02B3D,
+	0x03C02B3B, 0x03C02B39, 0x03C02B38, 0x03C02B36,
+	0x03C02B34, 0x03B02B44, 0x03B02B42, 0x03B02B40,
+	0x03B02B3E, 0x03B02B3D, 0x03B02B3B, 0x03B02B39,
+	0x03B02B38, 0x03B02B36, 0x03B02B34, 0x03B02B33,
+	0x03B02B32, 0x03B02B30, 0x03B02B2F, 0x03B02B2D,
+	0x03A02B44, 0x03A02B42, 0x03A02B40, 0x03A02B3E,
+	0x03A02B3D, 0x03A02B3B, 0x03A02B39, 0x03A02B38,
+	0x03A02B36, 0x03A02B34, 0x03902B44, 0x03902B42,
+	0x03902B40, 0x03902B3E, 0x03902B3D, 0x03902B3B,
+	0x03902B39, 0x03902B38, 0x03902B36, 0x03902B34,
+	0x03902B33, 0x03902B32, 0x03902B30, 0x03802B44,
+	0x03802B42, 0x03802B40, 0x03802B3E, 0x03802B3D,
+	0x03802B3B, 0x03802B39, 0x03802B38, 0x03802B36,
+	0x03802B34, 0x03802B33, 0x03802B32, 0x03802B30,
+	0x03802B2F, 0x03802B2D, 0x03802B2C, 0x03802B2B,
+	0x03802B2A, 0x03802B29, 0x03802B27, 0x03802B26,
+	0x03802B25, 0x03802B24, 0x03802B23, 0x03802B22,
+	0x03802B21, 0x03802B20, 0x03802B1F, 0x03802B1E,
+	0x03802B1E, 0x03802B1D, 0x03802B1C, 0x03802B1B,
+	0x03802B1A, 0x03802B1A, 0x03802B19, 0x03802B18,
+	0x03802B18, 0x03802B18, 0x03802B18, 0x03802B18,
+	0x03802B18, 0x03802B18, 0x03802B18, 0x03802B18,
+	0x03802B18, 0x03802B18, 0x03802B18, 0x00002B00,
 };
 
 static const u32 b43_ntab_gainctl1[] = {
-	0x007F003F, 0x007E013F, 0x007D023E, 0x007C033E,
-	0x007B043D, 0x007A053D, 0x0079063C, 0x0078073C,
-	0x0077083B, 0x0076093B, 0x00750A3A, 0x00740B3A,
-	0x00730C39, 0x00720D39, 0x00710E38, 0x00700F38,
-	0x006F0037, 0x006E0137, 0x006D0236, 0x006C0336,
-	0x006B0435, 0x006A0535, 0x00690634, 0x00680734,
-	0x00670833, 0x00660933, 0x00650A32, 0x00640B32,
-	0x00630C31, 0x00620D31, 0x00610E30, 0x00600F30,
-	0x005F002F, 0x005E012F, 0x005D022E, 0x005C032E,
-	0x005B042D, 0x005A052D, 0x0059062C, 0x0058072C,
-	0x0057082B, 0x0056092B, 0x00550A2A, 0x00540B2A,
-	0x00530C29, 0x00520D29, 0x00510E28, 0x00500F28,
-	0x004F0027, 0x004E0127, 0x004D0226, 0x004C0326,
-	0x004B0425, 0x004A0525, 0x00490624, 0x00480724,
-	0x00470823, 0x00460923, 0x00450A22, 0x00440B22,
-	0x00430C21, 0x00420D21, 0x00410E20, 0x00400F20,
-	0x003F001F, 0x003E011F, 0x003D021E, 0x003C031E,
-	0x003B041D, 0x003A051D, 0x0039061C, 0x0038071C,
-	0x0037081B, 0x0036091B, 0x00350A1A, 0x00340B1A,
-	0x00330C19, 0x00320D19, 0x00310E18, 0x00300F18,
-	0x002F0017, 0x002E0117, 0x002D0216, 0x002C0316,
-	0x002B0415, 0x002A0515, 0x00290614, 0x00280714,
-	0x00270813, 0x00260913, 0x00250A12, 0x00240B12,
-	0x00230C11, 0x00220D11, 0x00210E10, 0x00200F10,
-	0x001F000F, 0x001E010F, 0x001D020E, 0x001C030E,
-	0x001B040D, 0x001A050D, 0x0019060C, 0x0018070C,
-	0x0017080B, 0x0016090B, 0x00150A0A, 0x00140B0A,
-	0x00130C09, 0x00120D09, 0x00110E08, 0x00100F08,
-	0x000F0007, 0x000E0107, 0x000D0206, 0x000C0306,
-	0x000B0405, 0x000A0505, 0x00090604, 0x00080704,
-	0x00070803, 0x00060903, 0x00050A02, 0x00040B02,
-	0x00030C01, 0x00020D01, 0x00010E00, 0x00000F00,
+	0x03CC2B44, 0x03CC2B42, 0x03CC2B40, 0x03CC2B3E,
+	0x03CC2B3D, 0x03CC2B3B, 0x03C82B44, 0x03C82B42,
+	0x03C82B40, 0x03C82B3E, 0x03C82B3D, 0x03C82B3B,
+	0x03C82B39, 0x03C82B38, 0x03C82B36, 0x03C82B34,
+	0x03C42B44, 0x03C42B42, 0x03C42B40, 0x03C42B3E,
+	0x03C42B3D, 0x03C42B3B, 0x03C42B39, 0x03C42B38,
+	0x03C42B36, 0x03C42B34, 0x03C42B33, 0x03C42B32,
+	0x03C42B30, 0x03C42B2F, 0x03C42B2D, 0x03C02B44,
+	0x03C02B42, 0x03C02B40, 0x03C02B3E, 0x03C02B3D,
+	0x03C02B3B, 0x03C02B39, 0x03C02B38, 0x03C02B36,
+	0x03C02B34, 0x03B02B44, 0x03B02B42, 0x03B02B40,
+	0x03B02B3E, 0x03B02B3D, 0x03B02B3B, 0x03B02B39,
+	0x03B02B38, 0x03B02B36, 0x03B02B34, 0x03B02B33,
+	0x03B02B32, 0x03B02B30, 0x03B02B2F, 0x03B02B2D,
+	0x03A02B44, 0x03A02B42, 0x03A02B40, 0x03A02B3E,
+	0x03A02B3D, 0x03A02B3B, 0x03A02B39, 0x03A02B38,
+	0x03A02B36, 0x03A02B34, 0x03902B44, 0x03902B42,
+	0x03902B40, 0x03902B3E, 0x03902B3D, 0x03902B3B,
+	0x03902B39, 0x03902B38, 0x03902B36, 0x03902B34,
+	0x03902B33, 0x03902B32, 0x03902B30, 0x03802B44,
+	0x03802B42, 0x03802B40, 0x03802B3E, 0x03802B3D,
+	0x03802B3B, 0x03802B39, 0x03802B38, 0x03802B36,
+	0x03802B34, 0x03802B33, 0x03802B32, 0x03802B30,
+	0x03802B2F, 0x03802B2D, 0x03802B2C, 0x03802B2B,
+	0x03802B2A, 0x03802B29, 0x03802B27, 0x03802B26,
+	0x03802B25, 0x03802B24, 0x03802B23, 0x03802B22,
+	0x03802B21, 0x03802B20, 0x03802B1F, 0x03802B1E,
+	0x03802B1E, 0x03802B1D, 0x03802B1C, 0x03802B1B,
+	0x03802B1A, 0x03802B1A, 0x03802B19, 0x03802B18,
+	0x03802B18, 0x03802B18, 0x03802B18, 0x03802B18,
+	0x03802B18, 0x03802B18, 0x03802B18, 0x03802B18,
+	0x03802B18, 0x03802B18, 0x03802B18, 0x00002B00,
 };
 
 static const u32 b43_ntab_intlevel[] = {
@@ -1811,9 +1811,7 @@ void b43_ntab_write_bulk(struct b43_wldev *dev, u32 offset,
 }
 
 #define ntab_upload(dev, offset, data) do { \
-		unsigned int i;						\
-		for (i = 0; i < (offset##_SIZE); i++)			\
-			b43_ntab_write(dev, (offset) + i, (data)[i]);	\
+		b43_ntab_write_bulk(dev, offset, offset##_SIZE, data);	\
 	} while (0)
 
 void b43_nphy_rev0_1_2_tables_init(struct b43_wldev *dev)
@@ -1825,24 +1823,24 @@ void b43_nphy_rev0_1_2_tables_init(struct b43_wldev *dev)
 	ntab_upload(dev, B43_NTAB_TDTRN, b43_ntab_tdtrn);
 	ntab_upload(dev, B43_NTAB_INTLEVEL, b43_ntab_intlevel);
 	ntab_upload(dev, B43_NTAB_PILOT, b43_ntab_pilot);
-	ntab_upload(dev, B43_NTAB_PILOTLT, b43_ntab_pilotlt);
 	ntab_upload(dev, B43_NTAB_TDI20A0, b43_ntab_tdi20a0);
 	ntab_upload(dev, B43_NTAB_TDI20A1, b43_ntab_tdi20a1);
 	ntab_upload(dev, B43_NTAB_TDI40A0, b43_ntab_tdi40a0);
 	ntab_upload(dev, B43_NTAB_TDI40A1, b43_ntab_tdi40a1);
-	ntab_upload(dev, B43_NTAB_BDI, b43_ntab_bdi);
 	ntab_upload(dev, B43_NTAB_CHANEST, b43_ntab_channelest);
 	ntab_upload(dev, B43_NTAB_MCS, b43_ntab_mcs);
-
-	/* Volatile tables */
 	ntab_upload(dev, B43_NTAB_NOISEVAR10, b43_ntab_noisevar10);
 	ntab_upload(dev, B43_NTAB_NOISEVAR11, b43_ntab_noisevar11);
+
+	/* Volatile tables */
+	ntab_upload(dev, B43_NTAB_BDI, b43_ntab_bdi);
+	ntab_upload(dev, B43_NTAB_PILOTLT, b43_ntab_pilotlt);
+	ntab_upload(dev, B43_NTAB_C0_GAINCTL, b43_ntab_gainctl0);
+	ntab_upload(dev, B43_NTAB_C1_GAINCTL, b43_ntab_gainctl1);
 	ntab_upload(dev, B43_NTAB_C0_ESTPLT, b43_ntab_estimatepowerlt0);
 	ntab_upload(dev, B43_NTAB_C1_ESTPLT, b43_ntab_estimatepowerlt1);
 	ntab_upload(dev, B43_NTAB_C0_ADJPLT, b43_ntab_adjustpower0);
 	ntab_upload(dev, B43_NTAB_C1_ADJPLT, b43_ntab_adjustpower1);
-	ntab_upload(dev, B43_NTAB_C0_GAINCTL, b43_ntab_gainctl0);
-	ntab_upload(dev, B43_NTAB_C1_GAINCTL, b43_ntab_gainctl1);
 	ntab_upload(dev, B43_NTAB_C0_IQLT, b43_ntab_iqlt0);
 	ntab_upload(dev, B43_NTAB_C1_IQLT, b43_ntab_iqlt1);
 	ntab_upload(dev, B43_NTAB_C0_LOFEEDTH, b43_ntab_loftlt0);
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 67f18ecdb3b..1f11e1670bf 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -181,52 +181,75 @@ static int b43legacy_ratelimit(struct b43legacy_wl *wl)
 
 void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 
 	if (!b43legacy_ratelimit(wl))
 		return;
+
 	va_start(args, fmt);
-	printk(KERN_INFO "b43legacy-%s: ",
-	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
-	vprintk(fmt, args);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	printk(KERN_INFO "b43legacy-%s: %pV",
+	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
+
 	va_end(args);
 }
 
 void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 
 	if (!b43legacy_ratelimit(wl))
 		return;
+
 	va_start(args, fmt);
-	printk(KERN_ERR "b43legacy-%s ERROR: ",
-	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
-	vprintk(fmt, args);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	printk(KERN_ERR "b43legacy-%s ERROR: %pV",
+	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
+
 	va_end(args);
 }
 
 void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 
 	if (!b43legacy_ratelimit(wl))
 		return;
+
 	va_start(args, fmt);
-	printk(KERN_WARNING "b43legacy-%s warning: ",
-	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
-	vprintk(fmt, args);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	printk(KERN_WARNING "b43legacy-%s warning: %pV",
+	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
+
 	va_end(args);
 }
 
 #if B43legacy_DEBUG
 void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 
 	va_start(args, fmt);
-	printk(KERN_DEBUG "b43legacy-%s debug: ",
-	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
-	vprintk(fmt, args);
+
+	vaf.fmt = fmt;
+	vaf.va = &args;
+
+	printk(KERN_DEBUG "b43legacy-%s debug: %pV",
+	       (wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan", &vaf);
+
 	va_end(args);
 }
 #endif /* DEBUG */
diff --git a/drivers/net/wireless/b43legacy/rfkill.c b/drivers/net/wireless/b43legacy/rfkill.c
index d579df72b78..b90f223fb31 100644
--- a/drivers/net/wireless/b43legacy/rfkill.c
+++ b/drivers/net/wireless/b43legacy/rfkill.c
@@ -29,7 +29,7 @@
 /* Returns TRUE, if the radio is enabled in hardware. */
 bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
 {
-	if (dev->phy.rev >= 3) {
+	if (dev->dev->id.revision >= 3) {
 		if (!(b43legacy_read32(dev, B43legacy_MMIO_RADIO_HWENABLED_HI)
 		      & B43legacy_MMIO_RADIO_HWENABLED_HI_MASK))
 			return 1;
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index dbb986946e1..18d63f57777 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -858,7 +858,10 @@ void hostap_free_data(struct ap_data *ap)
 		return;
 	}
 
+	flush_work_sync(&ap->add_sta_proc_queue);
+
 #ifndef PRISM2_NO_KERNEL_IEEE80211_MGMT
+	flush_work_sync(&ap->wds_oper_queue);
 	if (ap->crypt)
 		ap->crypt->deinit(ap->crypt_priv);
 	ap->crypt = ap->crypt_priv = NULL;
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index b7cb165d612..a8bddd81b4d 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -3317,7 +3317,13 @@ static void prism2_free_local_data(struct net_device *dev)
 
 	unregister_netdev(local->dev);
 
-	flush_scheduled_work();
+	flush_work_sync(&local->reset_queue);
+	flush_work_sync(&local->set_multicast_list_queue);
+	flush_work_sync(&local->set_tim_queue);
+#ifndef PRISM2_NO_STATION_MODES
+	flush_work_sync(&local->info_queue);
+#endif
+	flush_work_sync(&local->comms_qual_update);
 
 	lib80211_crypt_info_free(&local->crypt_info);
 
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 25a2722c8a9..1d9aed64572 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -891,7 +891,6 @@ void hostap_setup_dev(struct net_device *dev, local_info_t *local,
 
 	SET_ETHTOOL_OPS(dev, &prism2_ethtool_ops);
 
-	netif_stop_queue(dev);
 }
 
 static int hostap_enable_hostapd(local_info_t *local, int rtnl_locked)
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index b82364258dc..ed424574160 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -106,6 +106,9 @@ config IWL5000
 		Intel WiFi Link 1000BGN
 		Intel Wireless WiFi 5150AGN
 		Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
+		Intel 6000 Gen 2 Series Wi-Fi Adapters (6000G2A and 6000G2B)
+		Intel WIreless WiFi Link 6050BGN Gen 2 Adapter
+		Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
 
 config IWL3945
 	tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)"
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 63edbe2e557..93380f97835 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -2,20 +2,27 @@ obj-$(CONFIG_IWLWIFI)	+= iwlcore.o
 iwlcore-objs 		:= iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
 iwlcore-objs 		+= iwl-rx.o iwl-tx.o iwl-sta.o
 iwlcore-objs 		+= iwl-scan.o iwl-led.o
+iwlcore-$(CONFIG_IWL3945) += iwl-legacy.o
+iwlcore-$(CONFIG_IWL4965) += iwl-legacy.o
 iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
 iwlcore-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
 
+# If 3945 is selected only, iwl-legacy.o will be added
+# to iwlcore-m above, but it needs to be built in.
+iwlcore-objs += $(iwlcore-m)
+
 CFLAGS_iwl-devtrace.o := -I$(src)
 
 # AGN
 obj-$(CONFIG_IWLAGN)	+= iwlagn.o
-iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o iwl-agn-led.o iwl-agn-ict.o
-iwlagn-objs		+= iwl-agn-ucode.o iwl-agn-hcmd.o iwl-agn-tx.o
+iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o iwl-agn-led.o
+iwlagn-objs		+= iwl-agn-ucode.o iwl-agn-tx.o
 iwlagn-objs		+= iwl-agn-lib.o iwl-agn-rx.o iwl-agn-calib.o
 iwlagn-objs		+= iwl-agn-tt.o iwl-agn-sta.o iwl-agn-eeprom.o
 iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-agn-debugfs.o
 
 iwlagn-$(CONFIG_IWL4965) += iwl-4965.o
+iwlagn-$(CONFIG_IWL5000) += iwl-agn-rxon.o iwl-agn-hcmd.o iwl-agn-ict.o
 iwlagn-$(CONFIG_IWL5000) += iwl-5000.o
 iwlagn-$(CONFIG_IWL5000) += iwl-6000.o
 iwlagn-$(CONFIG_IWL5000) += iwl-1000.o
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index db540910b11..ba78bc8a259 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -147,7 +147,11 @@ static int iwl1000_hw_set_hw_params(struct iwl_priv *priv)
 	priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
 
 	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
-	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+	if (priv->cfg->rx_with_siso_diversity)
+		priv->hw_params.rx_chains_num = 1;
+	else
+		priv->hw_params.rx_chains_num =
+			num_of_ant(priv->cfg->valid_rx_ant);
 	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
 	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 
@@ -211,14 +215,16 @@ static struct iwl_lib_ops iwl1000_lib = {
 		.calib_version	= iwlagn_eeprom_calib_version,
 		.query_addr = iwlagn_eeprom_query_addr,
 	},
-	.post_associate = iwl_post_associate,
-	.isr = iwl_isr_ict,
-	.config_ap = iwl_config_ap,
+	.isr_ops = {
+		.isr = iwl_isr_ict,
+		.free = iwl_free_isr_ict,
+		.alloc = iwl_alloc_isr_ict,
+		.reset = iwl_reset_ict,
+		.disable = iwl_disable_ict,
+	},
 	.temp_ops = {
 		.temperature = iwlagn_temperature,
 	 },
-	.manage_ibss_station = iwlagn_manage_ibss_station,
-	.update_bcast_stations = iwl_update_bcast_stations,
 	.debugfs_ops = {
 		.rx_stats_read = iwl_ucode_rx_stats_read,
 		.tx_stats_read = iwl_ucode_tx_stats_read,
@@ -226,7 +232,6 @@ static struct iwl_lib_ops iwl1000_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.recover_from_tx_stall = iwl_bg_monitor_recover,
 	.check_plcp_health = iwl_good_plcp_health,
 	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
@@ -243,6 +248,7 @@ static const struct iwl_ops iwl1000_ops = {
 	.hcmd = &iwlagn_hcmd,
 	.utils = &iwlagn_hcmd_utils,
 	.led = &iwlagn_led_ops,
+	.ieee80211_ops = &iwlagn_hw_ops,
 };
 
 static struct iwl_base_params iwl1000_base_params = {
@@ -259,7 +265,7 @@ static struct iwl_base_params iwl1000_base_params = {
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF,
 	.chain_noise_scale = 1000,
-	.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
 	.max_event_log_size = 128,
 	.ucode_tracing = true,
 	.sensitivity_calib_by_driver = true,
@@ -270,66 +276,49 @@ static struct iwl_ht_params iwl1000_ht_params = {
 	.use_rts_for_aggregation = true, /* use rts/cts protection */
 };
 
+#define IWL_DEVICE_1000						\
+	.fw_name_pre = IWL1000_FW_PRE,				\
+	.ucode_api_max = IWL1000_UCODE_API_MAX,			\
+	.ucode_api_min = IWL1000_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,	\
+	.ops = &iwl1000_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl1000_base_params,			\
+	.led_mode = IWL_LED_BLINK
+
 struct iwl_cfg iwl1000_bgn_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N 1000 BGN",
-	.fw_name_pre = IWL1000_FW_PRE,
-	.ucode_api_max = IWL1000_UCODE_API_MAX,
-	.ucode_api_min = IWL1000_UCODE_API_MIN,
-	.sku = IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
-	.ops = &iwl1000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl1000_base_params,
+	IWL_DEVICE_1000,
 	.ht_params = &iwl1000_ht_params,
 };
 
 struct iwl_cfg iwl1000_bg_cfg = {
 	.name = "Intel(R) Centrino(R) Wireless-N 1000 BG",
-	.fw_name_pre = IWL1000_FW_PRE,
-	.ucode_api_max = IWL1000_UCODE_API_MAX,
-	.ucode_api_min = IWL1000_UCODE_API_MIN,
-	.sku = IWL_SKU_G,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
-	.ops = &iwl1000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl1000_base_params,
+	IWL_DEVICE_1000,
 };
 
+#define IWL_DEVICE_100						\
+	.fw_name_pre = IWL100_FW_PRE,				\
+	.ucode_api_max = IWL100_UCODE_API_MAX,			\
+	.ucode_api_min = IWL100_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,	\
+	.ops = &iwl1000_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl1000_base_params,			\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.rx_with_siso_diversity = true
+
 struct iwl_cfg iwl100_bgn_cfg = {
-	.name = "Intel(R) 100 Series 1x1 BGN",
-	.fw_name_pre = IWL100_FW_PRE,
-	.ucode_api_max = IWL100_UCODE_API_MAX,
-	.ucode_api_min = IWL100_UCODE_API_MIN,
-	.sku = IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_A,
-	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
-	.ops = &iwl1000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl1000_base_params,
+	.name = "Intel(R) Centrino(R) Wireless-N 100 BGN",
+	IWL_DEVICE_100,
 	.ht_params = &iwl1000_ht_params,
 };
 
 struct iwl_cfg iwl100_bg_cfg = {
-	.name = "Intel(R) 100 Series 1x1 BG",
-	.fw_name_pre = IWL100_FW_PRE,
-	.ucode_api_max = IWL100_UCODE_API_MAX,
-	.ucode_api_min = IWL100_UCODE_API_MIN,
-	.sku = IWL_SKU_G,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_A,
-	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_1000_TX_POWER_VERSION,
-	.ops = &iwl1000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl1000_base_params,
+	.name = "Intel(R) Centrino(R) Wireless-N 100 BG",
+	IWL_DEVICE_100,
 };
 
 MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 176e5257767..a9b852be450 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -51,6 +51,7 @@
 #include "iwl-led.h"
 #include "iwl-3945-led.h"
 #include "iwl-3945-debugfs.h"
+#include "iwl-legacy.h"
 
 #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np)    \
 	[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,   \
@@ -115,7 +116,7 @@ void iwl3945_disable_events(struct iwl_priv *priv)
 	u32 base;		/* SRAM address of event log header */
 	u32 disable_ptr;	/* SRAM address of event-disable bitmap array */
 	u32 array_size;		/* # of u32 entries in array */
-	u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
+	static const u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
 		0x00000000,	/*   31 -    0  Event id numbers */
 		0x00000000,	/*   63 -   32 */
 		0x00000000,	/*   95 -   64 */
@@ -296,7 +297,7 @@ static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv,
 	if (iwl_queue_space(q) > q->low_mark && (txq_id >= 0) &&
 			(txq_id != IWL39_CMD_QUEUE_NUM) &&
 			priv->mac80211_registered)
-		iwl_wake_queue(priv, txq_id);
+		iwl_wake_queue(priv, txq);
 }
 
 /**
@@ -324,6 +325,7 @@ static void iwl3945_rx_reply_tx(struct iwl_priv *priv,
 		return;
 	}
 
+	txq->time_stamp = jiffies;
 	info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
 	ieee80211_tx_info_clear_status(info);
 
@@ -1451,6 +1453,10 @@ static int iwl3945_send_tx_power(struct iwl_priv *priv)
 	};
 	u16 chan;
 
+	if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
+		      "TX Power requested while scanning!\n"))
+		return -EAGAIN;
+
 	chan = le16_to_cpu(priv->contexts[IWL_RXON_CTX_BSS].active.channel);
 
 	txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
@@ -1779,6 +1785,9 @@ int iwl3945_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 	int rc = 0;
 	bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
 
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return -EINVAL;
+
 	if (!iwl_is_alive(priv))
 		return -1;
 
@@ -2722,11 +2731,9 @@ static struct iwl_lib_ops iwl3945_lib = {
 	},
 	.send_tx_power	= iwl3945_send_tx_power,
 	.is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr,
-	.post_associate = iwl3945_post_associate,
-	.isr = iwl_isr_legacy,
-	.config_ap = iwl3945_config_ap,
-	.manage_ibss_station = iwl3945_manage_ibss_station,
-	.recover_from_tx_stall = iwl_bg_monitor_recover,
+	.isr_ops = {
+		.isr = iwl_isr_legacy,
+	},
 	.check_plcp_health = iwl3945_good_plcp_health,
 
 	.debugfs_ops = {
@@ -2736,10 +2743,16 @@ static struct iwl_lib_ops iwl3945_lib = {
 	},
 };
 
+static const struct iwl_legacy_ops iwl3945_legacy_ops = {
+	.post_associate = iwl3945_post_associate,
+	.config_ap = iwl3945_config_ap,
+	.manage_ibss_station = iwl3945_manage_ibss_station,
+};
+
 static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
 	.get_hcmd_size = iwl3945_get_hcmd_size,
 	.build_addsta_hcmd = iwl3945_build_addsta_hcmd,
-	.tx_cmd_protection = iwlcore_tx_cmd_protection,
+	.tx_cmd_protection = iwl_legacy_tx_cmd_protection,
 	.request_scan = iwl3945_request_scan,
 	.post_scan = iwl3945_post_scan,
 };
@@ -2749,6 +2762,8 @@ static const struct iwl_ops iwl3945_ops = {
 	.hcmd = &iwl3945_hcmd,
 	.utils = &iwl3945_hcmd_utils,
 	.led = &iwl3945_led_ops,
+	.legacy = &iwl3945_legacy_ops,
+	.ieee80211_ops = &iwl3945_hw_ops,
 };
 
 static struct iwl_base_params iwl3945_base_params = {
@@ -2761,7 +2776,7 @@ static struct iwl_base_params iwl3945_base_params = {
 	.led_compensation = 64,
 	.broken_powersave = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
-	.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
 	.max_event_log_size = 512,
 	.tx_power_by_driver = true,
 };
@@ -2776,6 +2791,7 @@ static struct iwl_cfg iwl3945_bg_cfg = {
 	.ops = &iwl3945_ops,
 	.mod_params = &iwl3945_mod_params,
 	.base_params = &iwl3945_base_params,
+	.led_mode = IWL_LED_BLINK,
 };
 
 static struct iwl_cfg iwl3945_abg_cfg = {
@@ -2788,6 +2804,7 @@ static struct iwl_cfg iwl3945_abg_cfg = {
 	.ops = &iwl3945_ops,
 	.mod_params = &iwl3945_mod_params,
 	.base_params = &iwl3945_base_params,
+	.led_mode = IWL_LED_BLINK,
 };
 
 DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index 09391f0ee61..3eef1eb74a7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -264,10 +264,8 @@ void iwl3945_reply_statistics(struct iwl_priv *priv,
 			      struct iwl_rx_mem_buffer *rxb);
 extern void iwl3945_disable_events(struct iwl_priv *priv);
 extern int iwl4965_get_temperature(const struct iwl_priv *priv);
-extern void iwl3945_post_associate(struct iwl_priv *priv,
-				   struct ieee80211_vif *vif);
-extern void iwl3945_config_ap(struct iwl_priv *priv,
-			      struct ieee80211_vif *vif);
+extern void iwl3945_post_associate(struct iwl_priv *priv);
+extern void iwl3945_config_ap(struct iwl_priv *priv);
 
 extern int iwl3945_commit_rxon(struct iwl_priv *priv,
 			       struct iwl_rxon_context *ctx);
@@ -282,6 +280,8 @@ extern int iwl3945_commit_rxon(struct iwl_priv *priv,
  */
 extern u8 iwl3945_hw_find_station(struct iwl_priv *priv, const u8 *bssid);
 
+extern struct ieee80211_ops iwl3945_hw_ops;
+
 /*
  * Forward declare iwl-3945.c functions for iwl-base.c
  */
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index b207e3e9299..3f1e5f1bf84 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -48,6 +48,7 @@
 #include "iwl-agn-led.h"
 #include "iwl-agn.h"
 #include "iwl-agn-debugfs.h"
+#include "iwl-legacy.h"
 
 static int iwl4965_send_tx_power(struct iwl_priv *priv);
 static int iwl4965_hw_get_temperature(struct iwl_priv *priv);
@@ -1377,13 +1378,9 @@ static int iwl4965_send_tx_power(struct iwl_priv *priv)
 	u8 ctrl_chan_high = 0;
 	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
 
-	if (test_bit(STATUS_SCANNING, &priv->status)) {
-		/* If this gets hit a lot, switch it to a BUG() and catch
-		 * the stack trace to find out who is calling this during
-		 * a scan. */
-		IWL_WARN(priv, "TX Power requested while scanning!\n");
+	if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
+		      "TX Power requested while scanning!\n"))
 		return -EAGAIN;
-	}
 
 	band = priv->band == IEEE80211_BAND_2GHZ;
 
@@ -1447,6 +1444,142 @@ static int iwl4965_send_rxon_assoc(struct iwl_priv *priv,
 	return ret;
 }
 
+static int iwl4965_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+	/* cast away the const for active_rxon in this function */
+	struct iwl_rxon_cmd *active_rxon = (void *)&ctx->active;
+	int ret;
+	bool new_assoc =
+		!!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
+
+	if (!iwl_is_alive(priv))
+		return -EBUSY;
+
+	if (!ctx->is_active)
+		return 0;
+
+	/* always get timestamp with Rx frame */
+	ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
+
+	ret = iwl_check_rxon_cmd(priv, ctx);
+	if (ret) {
+		IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * receive commit_rxon request
+	 * abort any previous channel switch if still in process
+	 */
+	if (priv->switch_rxon.switch_in_progress &&
+	    (priv->switch_rxon.channel != ctx->staging.channel)) {
+		IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
+		      le16_to_cpu(priv->switch_rxon.channel));
+		iwl_chswitch_done(priv, false);
+	}
+
+	/* If we don't need to send a full RXON, we can use
+	 * iwl_rxon_assoc_cmd which is used to reconfigure filter
+	 * and other flags for the current radio configuration. */
+	if (!iwl_full_rxon_required(priv, ctx)) {
+		ret = iwl_send_rxon_assoc(priv, ctx);
+		if (ret) {
+			IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
+			return ret;
+		}
+
+		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
+		iwl_print_rx_config_cmd(priv, ctx);
+		return 0;
+	}
+
+	/* If we are currently associated and the new config requires
+	 * an RXON_ASSOC and the new config wants the associated mask enabled,
+	 * we must clear the associated from the active configuration
+	 * before we apply the new config */
+	if (iwl_is_associated_ctx(ctx) && new_assoc) {
+		IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
+		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+		ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
+				       sizeof(struct iwl_rxon_cmd),
+				       active_rxon);
+
+		/* If the mask clearing failed then we set
+		 * active_rxon back to what it was previously */
+		if (ret) {
+			active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
+			IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
+			return ret;
+		}
+		iwl_clear_ucode_stations(priv, ctx);
+		iwl_restore_stations(priv, ctx);
+		ret = iwl_restore_default_wep_keys(priv, ctx);
+		if (ret) {
+			IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
+			return ret;
+		}
+	}
+
+	IWL_DEBUG_INFO(priv, "Sending RXON\n"
+		       "* with%s RXON_FILTER_ASSOC_MSK\n"
+		       "* channel = %d\n"
+		       "* bssid = %pM\n",
+		       (new_assoc ? "" : "out"),
+		       le16_to_cpu(ctx->staging.channel),
+		       ctx->staging.bssid_addr);
+
+	iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto);
+
+	/* Apply the new configuration
+	 * RXON unassoc clears the station table in uCode so restoration of
+	 * stations is needed after it (the RXON command) completes
+	 */
+	if (!new_assoc) {
+		ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
+			      sizeof(struct iwl_rxon_cmd), &ctx->staging);
+		if (ret) {
+			IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
+			return ret;
+		}
+		IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n");
+		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
+		iwl_clear_ucode_stations(priv, ctx);
+		iwl_restore_stations(priv, ctx);
+		ret = iwl_restore_default_wep_keys(priv, ctx);
+		if (ret) {
+			IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
+			return ret;
+		}
+	}
+	if (new_assoc) {
+		priv->start_calib = 0;
+		/* Apply the new configuration
+		 * RXON assoc doesn't clear the station table in uCode,
+		 */
+		ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
+			      sizeof(struct iwl_rxon_cmd), &ctx->staging);
+		if (ret) {
+			IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
+			return ret;
+		}
+		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
+	}
+	iwl_print_rx_config_cmd(priv, ctx);
+
+	iwl_init_sensitivity(priv);
+
+	/* If we issue a new RXON command which required a tune then we must
+	 * send a new TXPOWER command or we won't be able to Tx any frames */
+	ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
+	if (ret) {
+		IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int iwl4965_hw_channel_switch(struct iwl_priv *priv,
 				     struct ieee80211_channel_switch *ch_switch)
 {
@@ -1554,22 +1687,6 @@ static void iwl4965_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
 }
 
 /**
- * sign_extend - Sign extend a value using specified bit as sign-bit
- *
- * Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1
- * and bit0..2 is 001b which when sign extended to 1111111111111001b is -7.
- *
- * @param oper value to sign extend
- * @param index 0 based bit index (0<=index<32) to sign bit
- */
-static s32 sign_extend(u32 oper, int index)
-{
-	u8 shift = 31 - index;
-
-	return (s32)(oper << shift) >> shift;
-}
-
-/**
  * iwl4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
  * @statistics: Provides the temperature reading from the uCode
  *
@@ -1606,9 +1723,9 @@ static int iwl4965_hw_get_temperature(struct iwl_priv *priv)
 	 * "initialize" ALIVE response.
 	 */
 	if (!test_bit(STATUS_TEMPERATURE, &priv->status))
-		vt = sign_extend(R4, 23);
+		vt = sign_extend32(R4, 23);
 	else
-		vt = sign_extend(le32_to_cpu(priv->_agn.statistics.
+		vt = sign_extend32(le32_to_cpu(priv->_agn.statistics.
 				 general.common.temperature), 23);
 
 	IWL_DEBUG_TEMP(priv, "Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
@@ -2081,6 +2198,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 		return;
 	}
 
+	txq->time_stamp = jiffies;
 	info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
 	memset(&info->status, 0, sizeof(info->status));
 
@@ -2121,12 +2239,8 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 
 			if (priv->mac80211_registered &&
 			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
-			    (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
-				if (agg->state == IWL_AGG_OFF)
-					iwl_wake_queue(priv, txq_id);
-				else
-					iwl_wake_queue(priv, txq->swq_id);
-			}
+			    (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA))
+				iwl_wake_queue(priv, txq);
 		}
 	} else {
 		info->status.rates[0].count = tx_resp->failure_frame + 1;
@@ -2150,7 +2264,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 
 		if (priv->mac80211_registered &&
 		    (iwl_queue_space(&txq->q) > txq->q.low_mark))
-			iwl_wake_queue(priv, txq_id);
+			iwl_wake_queue(priv, txq);
 	}
 	if (qc && likely(sta_id != IWL_INVALID_STATION))
 		iwlagn_txq_check_empty(priv, sta_id, tid, txq_id);
@@ -2216,7 +2330,7 @@ static void iwl4965_cancel_deferred_work(struct iwl_priv *priv)
 
 static struct iwl_hcmd_ops iwl4965_hcmd = {
 	.rxon_assoc = iwl4965_send_rxon_assoc,
-	.commit_rxon = iwlagn_commit_rxon,
+	.commit_rxon = iwl4965_commit_rxon,
 	.set_rxon_chain = iwlagn_set_rxon_chain,
 	.send_bt_config = iwl_send_bt_config,
 };
@@ -2233,12 +2347,155 @@ static void iwl4965_post_scan(struct iwl_priv *priv)
 		iwlcore_commit_rxon(priv, ctx);
 }
 
+static void iwl4965_post_associate(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct ieee80211_vif *vif = ctx->vif;
+	struct ieee80211_conf *conf = NULL;
+	int ret = 0;
+
+	if (!vif || !priv->is_open)
+		return;
+
+	if (vif->type == NL80211_IFTYPE_AP) {
+		IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
+		return;
+	}
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	iwl_scan_cancel_timeout(priv, 200);
+
+	conf = ieee80211_get_hw_conf(priv->hw);
+
+	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	iwlcore_commit_rxon(priv, ctx);
+
+	ret = iwl_send_rxon_timing(priv, ctx);
+	if (ret)
+		IWL_WARN(priv, "RXON timing - "
+			    "Attempting to continue.\n");
+
+	ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+
+	iwl_set_rxon_ht(priv, &priv->current_ht_config);
+
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
+
+	ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
+
+	IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
+			vif->bss_conf.aid, vif->bss_conf.beacon_int);
+
+	if (vif->bss_conf.use_short_preamble)
+		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+	if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
+		if (vif->bss_conf.use_short_slot)
+			ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+	}
+
+	iwlcore_commit_rxon(priv, ctx);
+
+	IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
+			vif->bss_conf.aid, ctx->active.bssid_addr);
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		iwlagn_send_beacon_cmd(priv);
+		break;
+	default:
+		IWL_ERR(priv, "%s Should not be called in %d mode\n",
+			  __func__, vif->type);
+		break;
+	}
+
+	/* the chain noise calibration will enabled PM upon completion
+	 * If chain noise has already been run, then we need to enable
+	 * power management here */
+	if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
+		iwl_power_update_mode(priv, false);
+
+	/* Enable Rx differential gain and sensitivity calibrations */
+	iwl_chain_noise_reset(priv);
+	priv->start_calib = 1;
+}
+
+static void iwl4965_config_ap(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct ieee80211_vif *vif = ctx->vif;
+	int ret = 0;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* The following should be done only at AP bring up */
+	if (!iwl_is_associated_ctx(ctx)) {
+
+		/* RXON - unassoc (to set timing command) */
+		ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+		iwlcore_commit_rxon(priv, ctx);
+
+		/* RXON Timing */
+		ret = iwl_send_rxon_timing(priv, ctx);
+		if (ret)
+			IWL_WARN(priv, "RXON timing failed - "
+					"Attempting to continue.\n");
+
+		/* AP has all antennas */
+		priv->chain_noise_data.active_chains =
+			priv->hw_params.valid_rx_ant;
+		iwl_set_rxon_ht(priv, &priv->current_ht_config);
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
+
+		ctx->staging.assoc_id = 0;
+
+		if (vif->bss_conf.use_short_preamble)
+			ctx->staging.flags |=
+				RXON_FLG_SHORT_PREAMBLE_MSK;
+		else
+			ctx->staging.flags &=
+				~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+		if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
+			if (vif->bss_conf.use_short_slot)
+				ctx->staging.flags |=
+					RXON_FLG_SHORT_SLOT_MSK;
+			else
+				ctx->staging.flags &=
+					~RXON_FLG_SHORT_SLOT_MSK;
+		}
+		/* need to send beacon cmd before committing assoc RXON! */
+		iwlagn_send_beacon_cmd(priv);
+		/* restore RXON assoc */
+		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		iwlcore_commit_rxon(priv, ctx);
+	}
+	iwlagn_send_beacon_cmd(priv);
+
+	/* FIXME - we need to add code here to detect a totally new
+	 * configuration, reset the AP, unassoc, rxon timing, assoc,
+	 * clear sta table, add BCAST sta... */
+}
+
 static struct iwl_hcmd_utils_ops iwl4965_hcmd_utils = {
 	.get_hcmd_size = iwl4965_get_hcmd_size,
 	.build_addsta_hcmd = iwl4965_build_addsta_hcmd,
 	.chain_noise_reset = iwl4965_chain_noise_reset,
 	.gain_computation = iwl4965_gain_computation,
-	.tx_cmd_protection = iwlcore_tx_cmd_protection,
+	.tx_cmd_protection = iwl_legacy_tx_cmd_protection,
 	.calc_rssi = iwl4965_calc_rssi,
 	.request_scan = iwlagn_request_scan,
 	.post_scan = iwl4965_post_scan,
@@ -2285,14 +2542,12 @@ static struct iwl_lib_ops iwl4965_lib = {
 	},
 	.send_tx_power	= iwl4965_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
-	.post_associate = iwl_post_associate,
-	.config_ap = iwl_config_ap,
-	.isr = iwl_isr_legacy,
+	.isr_ops = {
+		.isr = iwl_isr_legacy,
+	},
 	.temp_ops = {
 		.temperature = iwl4965_temperature_calib,
 	},
-	.manage_ibss_station = iwlagn_manage_ibss_station,
-	.update_bcast_stations = iwl_update_bcast_stations,
 	.debugfs_ops = {
 		.rx_stats_read = iwl_ucode_rx_stats_read,
 		.tx_stats_read = iwl_ucode_tx_stats_read,
@@ -2300,15 +2555,46 @@ static struct iwl_lib_ops iwl4965_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.recover_from_tx_stall = iwl_bg_monitor_recover,
 	.check_plcp_health = iwl_good_plcp_health,
 };
 
+static const struct iwl_legacy_ops iwl4965_legacy_ops = {
+	.post_associate = iwl4965_post_associate,
+	.config_ap = iwl4965_config_ap,
+	.manage_ibss_station = iwlagn_manage_ibss_station,
+	.update_bcast_stations = iwl_update_bcast_stations,
+};
+
+struct ieee80211_ops iwl4965_hw_ops = {
+	.tx = iwlagn_mac_tx,
+	.start = iwlagn_mac_start,
+	.stop = iwlagn_mac_stop,
+	.add_interface = iwl_mac_add_interface,
+	.remove_interface = iwl_mac_remove_interface,
+	.change_interface = iwl_mac_change_interface,
+	.config = iwl_legacy_mac_config,
+	.configure_filter = iwlagn_configure_filter,
+	.set_key = iwlagn_mac_set_key,
+	.update_tkip_key = iwlagn_mac_update_tkip_key,
+	.conf_tx = iwl_mac_conf_tx,
+	.reset_tsf = iwl_legacy_mac_reset_tsf,
+	.bss_info_changed = iwl_legacy_mac_bss_info_changed,
+	.ampdu_action = iwlagn_mac_ampdu_action,
+	.hw_scan = iwl_mac_hw_scan,
+	.sta_add = iwlagn_mac_sta_add,
+	.sta_remove = iwl_mac_sta_remove,
+	.channel_switch = iwlagn_mac_channel_switch,
+	.flush = iwlagn_mac_flush,
+	.tx_last_beacon = iwl_mac_tx_last_beacon,
+};
+
 static const struct iwl_ops iwl4965_ops = {
 	.lib = &iwl4965_lib,
 	.hcmd = &iwl4965_hcmd,
 	.utils = &iwl4965_hcmd_utils,
 	.led = &iwlagn_led_ops,
+	.legacy = &iwl4965_legacy_ops,
+	.ieee80211_ops = &iwl4965_hw_ops,
 };
 
 static struct iwl_base_params iwl4965_base_params = {
@@ -2323,13 +2609,14 @@ static struct iwl_base_params iwl4965_base_params = {
 	.led_compensation = 61,
 	.chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
-	.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
 	.temperature_kelvin = true,
 	.max_event_log_size = 512,
 	.tx_power_by_driver = true,
 	.ucode_tracing = true,
 	.sensitivity_calib_by_driver = true,
 	.chain_noise_calib_by_driver = true,
+	.no_agg_framecnt_info = true,
 };
 
 struct iwl_cfg iwl4965_agn_cfg = {
@@ -2337,7 +2624,6 @@ struct iwl_cfg iwl4965_agn_cfg = {
 	.fw_name_pre = IWL4965_FW_PRE,
 	.ucode_api_max = IWL4965_UCODE_API_MAX,
 	.ucode_api_min = IWL4965_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 	.valid_tx_ant = ANT_AB,
 	.valid_rx_ant = ANT_ABC,
 	.eeprom_ver = EEPROM_4965_EEPROM_VERSION,
@@ -2345,6 +2631,7 @@ struct iwl_cfg iwl4965_agn_cfg = {
 	.ops = &iwl4965_ops,
 	.mod_params = &iwlagn_mod_params,
 	.base_params = &iwl4965_base_params,
+	.led_mode = IWL_LED_BLINK,
 	/*
 	 * Force use of chains B and C for scan RX on 5 GHz band
 	 * because the device has off-channel reception on chain A.
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index fd9fbc93ea1..79ab0a6b138 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -385,14 +385,16 @@ static struct iwl_lib_ops iwl5000_lib = {
 		.calib_version	= iwlagn_eeprom_calib_version,
 		.query_addr = iwlagn_eeprom_query_addr,
 	},
-	.post_associate = iwl_post_associate,
-	.isr = iwl_isr_ict,
-	.config_ap = iwl_config_ap,
+	.isr_ops = {
+		.isr = iwl_isr_ict,
+		.free = iwl_free_isr_ict,
+		.alloc = iwl_alloc_isr_ict,
+		.reset = iwl_reset_ict,
+		.disable = iwl_disable_ict,
+	},
 	.temp_ops = {
 		.temperature = iwlagn_temperature,
 	 },
-	.manage_ibss_station = iwlagn_manage_ibss_station,
-	.update_bcast_stations = iwl_update_bcast_stations,
 	.debugfs_ops = {
 		.rx_stats_read = iwl_ucode_rx_stats_read,
 		.tx_stats_read = iwl_ucode_tx_stats_read,
@@ -400,7 +402,6 @@ static struct iwl_lib_ops iwl5000_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.recover_from_tx_stall = iwl_bg_monitor_recover,
 	.check_plcp_health = iwl_good_plcp_health,
 	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
@@ -453,14 +454,16 @@ static struct iwl_lib_ops iwl5150_lib = {
 		.calib_version	= iwlagn_eeprom_calib_version,
 		.query_addr = iwlagn_eeprom_query_addr,
 	},
-	.post_associate = iwl_post_associate,
-	.isr = iwl_isr_ict,
-	.config_ap = iwl_config_ap,
+	.isr_ops = {
+		.isr = iwl_isr_ict,
+		.free = iwl_free_isr_ict,
+		.alloc = iwl_alloc_isr_ict,
+		.reset = iwl_reset_ict,
+		.disable = iwl_disable_ict,
+	},
 	.temp_ops = {
 		.temperature = iwl5150_temperature,
 	 },
-	.manage_ibss_station = iwlagn_manage_ibss_station,
-	.update_bcast_stations = iwl_update_bcast_stations,
 	.debugfs_ops = {
 		.rx_stats_read = iwl_ucode_rx_stats_read,
 		.tx_stats_read = iwl_ucode_tx_stats_read,
@@ -468,7 +471,6 @@ static struct iwl_lib_ops iwl5150_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.recover_from_tx_stall = iwl_bg_monitor_recover,
 	.check_plcp_health = iwl_good_plcp_health,
 	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
@@ -485,6 +487,7 @@ static const struct iwl_ops iwl5000_ops = {
 	.hcmd = &iwlagn_hcmd,
 	.utils = &iwlagn_hcmd_utils,
 	.led = &iwlagn_led_ops,
+	.ieee80211_ops = &iwlagn_hw_ops,
 };
 
 static const struct iwl_ops iwl5150_ops = {
@@ -492,6 +495,7 @@ static const struct iwl_ops iwl5150_ops = {
 	.hcmd = &iwlagn_hcmd,
 	.utils = &iwlagn_hcmd_utils,
 	.led = &iwlagn_led_ops,
+	.ieee80211_ops = &iwlagn_hw_ops,
 };
 
 static struct iwl_base_params iwl5000_base_params = {
@@ -505,7 +509,7 @@ static struct iwl_base_params iwl5000_base_params = {
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
 	.chain_noise_scale = 1000,
-	.monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
+	.wd_timeout = IWL_LONG_WD_TIMEOUT,
 	.max_event_log_size = 512,
 	.ucode_tracing = true,
 	.sensitivity_calib_by_driver = true,
@@ -516,66 +520,43 @@ static struct iwl_ht_params iwl5000_ht_params = {
 	.use_rts_for_aggregation = true, /* use rts/cts protection */
 };
 
+#define IWL_DEVICE_5000						\
+	.fw_name_pre = IWL5000_FW_PRE,				\
+	.ucode_api_max = IWL5000_UCODE_API_MAX,			\
+	.ucode_api_min = IWL5000_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,	\
+	.ops = &iwl5000_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl5000_base_params,			\
+	.led_mode = IWL_LED_BLINK
+
 struct iwl_cfg iwl5300_agn_cfg = {
 	.name = "Intel(R) Ultimate N WiFi Link 5300 AGN",
-	.fw_name_pre = IWL5000_FW_PRE,
-	.ucode_api_max = IWL5000_UCODE_API_MAX,
-	.ucode_api_min = IWL5000_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_ABC,
-	.valid_rx_ant = ANT_ABC,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-	.ops = &iwl5000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
+	IWL_DEVICE_5000,
 	.ht_params = &iwl5000_ht_params,
 };
 
 struct iwl_cfg iwl5100_bgn_cfg = {
 	.name = "Intel(R) WiFi Link 5100 BGN",
-	.fw_name_pre = IWL5000_FW_PRE,
-	.ucode_api_max = IWL5000_UCODE_API_MAX,
-	.ucode_api_min = IWL5000_UCODE_API_MIN,
-	.sku = IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_B,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-	.ops = &iwl5000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
+	IWL_DEVICE_5000,
+	.valid_tx_ant = ANT_B,		/* .cfg overwrite */
+	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */
 	.ht_params = &iwl5000_ht_params,
 };
 
 struct iwl_cfg iwl5100_abg_cfg = {
 	.name = "Intel(R) WiFi Link 5100 ABG",
-	.fw_name_pre = IWL5000_FW_PRE,
-	.ucode_api_max = IWL5000_UCODE_API_MAX,
-	.ucode_api_min = IWL5000_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G,
-	.valid_tx_ant = ANT_B,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-	.ops = &iwl5000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
+	IWL_DEVICE_5000,
+	.valid_tx_ant = ANT_B,		/* .cfg overwrite */
+	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */
 };
 
 struct iwl_cfg iwl5100_agn_cfg = {
 	.name = "Intel(R) WiFi Link 5100 AGN",
-	.fw_name_pre = IWL5000_FW_PRE,
-	.ucode_api_max = IWL5000_UCODE_API_MAX,
-	.ucode_api_min = IWL5000_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_B,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
-	.ops = &iwl5000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
+	IWL_DEVICE_5000,
+	.valid_tx_ant = ANT_B,		/* .cfg overwrite */
+	.valid_rx_ant = ANT_AB,		/* .cfg overwrite */
 	.ht_params = &iwl5000_ht_params,
 };
 
@@ -584,48 +565,39 @@ struct iwl_cfg iwl5350_agn_cfg = {
 	.fw_name_pre = IWL5000_FW_PRE,
 	.ucode_api_max = IWL5000_UCODE_API_MAX,
 	.ucode_api_min = IWL5000_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_ABC,
-	.valid_rx_ant = ANT_ABC,
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
 	.ops = &iwl5000_ops,
 	.mod_params = &iwlagn_mod_params,
 	.base_params = &iwl5000_base_params,
 	.ht_params = &iwl5000_ht_params,
+	.led_mode = IWL_LED_BLINK,
+	.internal_wimax_coex = true,
 };
 
+#define IWL_DEVICE_5150						\
+	.fw_name_pre = IWL5150_FW_PRE,				\
+	.ucode_api_max = IWL5150_UCODE_API_MAX,			\
+	.ucode_api_min = IWL5150_UCODE_API_MIN,			\
+	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,	\
+	.ops = &iwl5150_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl5000_base_params,			\
+	.need_dc_calib = true,					\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
+
 struct iwl_cfg iwl5150_agn_cfg = {
 	.name = "Intel(R) WiMAX/WiFi Link 5150 AGN",
-	.fw_name_pre = IWL5150_FW_PRE,
-	.ucode_api_max = IWL5150_UCODE_API_MAX,
-	.ucode_api_min = IWL5150_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
-	.ops = &iwl5150_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
+	IWL_DEVICE_5150,
 	.ht_params = &iwl5000_ht_params,
-	.need_dc_calib = true,
+
 };
 
 struct iwl_cfg iwl5150_abg_cfg = {
 	.name = "Intel(R) WiMAX/WiFi Link 5150 ABG",
-	.fw_name_pre = IWL5150_FW_PRE,
-	.ucode_api_max = IWL5150_UCODE_API_MAX,
-	.ucode_api_min = IWL5150_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
-	.ops = &iwl5150_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl5000_base_params,
-	.need_dc_calib = true,
+	IWL_DEVICE_5150,
 };
 
 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index 11e6532fc57..af505bcd7ae 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -53,13 +53,11 @@
 #define IWL6000_UCODE_API_MAX 4
 #define IWL6050_UCODE_API_MAX 5
 #define IWL6000G2_UCODE_API_MAX 5
-#define IWL130_UCODE_API_MAX 5
 
 /* Lowest firmware API version supported */
 #define IWL6000_UCODE_API_MIN 4
 #define IWL6050_UCODE_API_MIN 4
 #define IWL6000G2_UCODE_API_MIN 4
-#define IWL130_UCODE_API_MIN 5
 
 #define IWL6000_FW_PRE "iwlwifi-6000-"
 #define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
@@ -77,10 +75,6 @@
 #define _IWL6000G2B_MODULE_FIRMWARE(api) IWL6000G2B_FW_PRE #api ".ucode"
 #define IWL6000G2B_MODULE_FIRMWARE(api) _IWL6000G2B_MODULE_FIRMWARE(api)
 
-#define IWL130_FW_PRE "iwlwifi-130-"
-#define _IWL130_MODULE_FIRMWARE(api) IWL130_FW_PRE #api ".ucode"
-#define IWL130_MODULE_FIRMWARE(api) _IWL130_MODULE_FIRMWARE(api)
-
 static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
 {
 	/* want Celsius */
@@ -188,7 +182,11 @@ static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
 	priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
 
 	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
-	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+	if (priv->cfg->rx_with_siso_diversity)
+		priv->hw_params.rx_chains_num = 1;
+	else
+		priv->hw_params.rx_chains_num =
+			num_of_ant(priv->cfg->valid_rx_ant);
 	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
 	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 
@@ -328,14 +326,16 @@ static struct iwl_lib_ops iwl6000_lib = {
 		.query_addr = iwlagn_eeprom_query_addr,
 		.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
 	},
-	.post_associate = iwl_post_associate,
-	.isr = iwl_isr_ict,
-	.config_ap = iwl_config_ap,
+	.isr_ops = {
+		.isr = iwl_isr_ict,
+		.free = iwl_free_isr_ict,
+		.alloc = iwl_alloc_isr_ict,
+		.reset = iwl_reset_ict,
+		.disable = iwl_disable_ict,
+	},
 	.temp_ops = {
 		.temperature = iwlagn_temperature,
 	 },
-	.manage_ibss_station = iwlagn_manage_ibss_station,
-	.update_bcast_stations = iwl_update_bcast_stations,
 	.debugfs_ops = {
 		.rx_stats_read = iwl_ucode_rx_stats_read,
 		.tx_stats_read = iwl_ucode_tx_stats_read,
@@ -343,7 +343,6 @@ static struct iwl_lib_ops iwl6000_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.recover_from_tx_stall = iwl_bg_monitor_recover,
 	.check_plcp_health = iwl_good_plcp_health,
 	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
@@ -399,14 +398,16 @@ static struct iwl_lib_ops iwl6000g2b_lib = {
 		.query_addr = iwlagn_eeprom_query_addr,
 		.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
 	},
-	.post_associate = iwl_post_associate,
-	.isr = iwl_isr_ict,
-	.config_ap = iwl_config_ap,
+	.isr_ops = {
+		.isr = iwl_isr_ict,
+		.free = iwl_free_isr_ict,
+		.alloc = iwl_alloc_isr_ict,
+		.reset = iwl_reset_ict,
+		.disable = iwl_disable_ict,
+	},
 	.temp_ops = {
 		.temperature = iwlagn_temperature,
 	 },
-	.manage_ibss_station = iwlagn_manage_ibss_station,
-	.update_bcast_stations = iwl_update_bcast_stations,
 	.debugfs_ops = {
 		.rx_stats_read = iwl_ucode_rx_stats_read,
 		.tx_stats_read = iwl_ucode_tx_stats_read,
@@ -414,7 +415,6 @@ static struct iwl_lib_ops iwl6000g2b_lib = {
 		.bt_stats_read = iwl_ucode_bt_stats_read,
 		.reply_tx_error = iwl_reply_tx_error_read,
 	},
-	.recover_from_tx_stall = iwl_bg_monitor_recover,
 	.check_plcp_health = iwl_good_plcp_health,
 	.check_ack_health = iwl_good_ack_health,
 	.txfifo_flush = iwlagn_txfifo_flush,
@@ -439,6 +439,7 @@ static const struct iwl_ops iwl6000_ops = {
 	.hcmd = &iwlagn_hcmd,
 	.utils = &iwlagn_hcmd_utils,
 	.led = &iwlagn_led_ops,
+	.ieee80211_ops = &iwlagn_hw_ops,
 };
 
 static const struct iwl_ops iwl6050_ops = {
@@ -447,6 +448,7 @@ static const struct iwl_ops iwl6050_ops = {
 	.utils = &iwlagn_hcmd_utils,
 	.led = &iwlagn_led_ops,
 	.nic = &iwl6050_nic_ops,
+	.ieee80211_ops = &iwlagn_hw_ops,
 };
 
 static const struct iwl_ops iwl6050g2_ops = {
@@ -455,6 +457,7 @@ static const struct iwl_ops iwl6050g2_ops = {
 	.utils = &iwlagn_hcmd_utils,
 	.led = &iwlagn_led_ops,
 	.nic = &iwl6050g2_nic_ops,
+	.ieee80211_ops = &iwlagn_hw_ops,
 };
 
 static const struct iwl_ops iwl6000g2b_ops = {
@@ -462,6 +465,7 @@ static const struct iwl_ops iwl6000g2b_ops = {
 	.hcmd = &iwlagn_bt_hcmd,
 	.utils = &iwlagn_hcmd_utils,
 	.led = &iwlagn_led_ops,
+	.ieee80211_ops = &iwlagn_hw_ops,
 };
 
 static struct iwl_base_params iwl6000_base_params = {
@@ -480,11 +484,12 @@ static struct iwl_base_params iwl6000_base_params = {
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 	.chain_noise_scale = 1000,
-	.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
 	.max_event_log_size = 512,
 	.ucode_tracing = true,
 	.sensitivity_calib_by_driver = true,
 	.chain_noise_calib_by_driver = true,
+	.shadow_reg_enable = true,
 };
 
 static struct iwl_base_params iwl6050_base_params = {
@@ -503,13 +508,14 @@ static struct iwl_base_params iwl6050_base_params = {
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 	.chain_noise_scale = 1500,
-	.monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
+	.wd_timeout = IWL_DEF_WD_TIMEOUT,
 	.max_event_log_size = 1024,
 	.ucode_tracing = true,
 	.sensitivity_calib_by_driver = true,
 	.chain_noise_calib_by_driver = true,
+	.shadow_reg_enable = true,
 };
-static struct iwl_base_params iwl6000_coex_base_params = {
+static struct iwl_base_params iwl6000_g2_base_params = {
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
 	.num_of_queues = IWLAGN_NUM_QUEUES,
 	.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
@@ -518,18 +524,19 @@ static struct iwl_base_params iwl6000_coex_base_params = {
 	.use_bsm = false,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
-	.led_compensation = 51,
+	.led_compensation = 57,
 	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 	.supports_idle = true,
 	.adv_thermal_throttle = true,
 	.support_ct_kill_exit = true,
 	.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
 	.chain_noise_scale = 1000,
-	.monitor_recover_period = IWL_LONG_MONITORING_PERIOD,
+	.wd_timeout = IWL_LONG_WD_TIMEOUT,
 	.max_event_log_size = 512,
 	.ucode_tracing = true,
 	.sensitivity_calib_by_driver = true,
 	.chain_noise_calib_by_driver = true,
+	.shadow_reg_enable = true,
 };
 
 static struct iwl_ht_params iwl6000_ht_params = {
@@ -541,262 +548,164 @@ static struct iwl_bt_params iwl6000_bt_params = {
 	.bt_statistics = true,
 	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
 	.advanced_bt_coexist = true,
+	.agg_time_limit = BT_AGG_THRESHOLD_DEF,
 	.bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE,
 	.bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT,
+	.bt_sco_disable = true,
+};
+
+#define IWL_DEVICE_6005						\
+	.fw_name_pre = IWL6000G2A_FW_PRE,			\
+	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
+	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
+	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,	\
+	.ops = &iwl6000_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl6000_g2_base_params,			\
+	.need_dc_calib = true,					\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE
+
+struct iwl_cfg iwl6005_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 AGN",
+	IWL_DEVICE_6005,
+	.ht_params = &iwl6000_ht_params,
 };
 
-struct iwl_cfg iwl6000g2a_2agn_cfg = {
-	.name = "6000 Series 2x2 AGN Gen2a",
-	.fw_name_pre = IWL6000G2A_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
+struct iwl_cfg iwl6005_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 ABG",
+	IWL_DEVICE_6005,
+};
+
+struct iwl_cfg iwl6005_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6205 BG",
+	IWL_DEVICE_6005,
+};
+
+#define IWL_DEVICE_6030						\
+	.fw_name_pre = IWL6000G2B_FW_PRE,			\
+	.ucode_api_max = IWL6000G2_UCODE_API_MAX,		\
+	.ucode_api_min = IWL6000G2_UCODE_API_MIN,		\
+	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,	\
+	.ops = &iwl6000g2b_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl6000_g2_base_params,			\
+	.bt_params = &iwl6000_bt_params,			\
+	.need_dc_calib = true,					\
+	.need_temp_offset_calib = true,				\
+	.led_mode = IWL_LED_RF_STATE,				\
+	.adv_pm = true						\
+
+struct iwl_cfg iwl6030_2agn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 AGN",
+	IWL_DEVICE_6030,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-};
-
-struct iwl_cfg iwl6000g2a_2abg_cfg = {
-	.name = "6000 Series 2x2 ABG Gen2a",
-	.fw_name_pre = IWL6000G2A_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-};
-
-struct iwl_cfg iwl6000g2a_2bg_cfg = {
-	.name = "6000 Series 2x2 BG Gen2a",
-	.fw_name_pre = IWL6000G2A_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.sku = IWL_SKU_G,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-};
-
-struct iwl_cfg iwl6000g2b_2agn_cfg = {
-	.name = "6000 Series 2x2 AGN Gen2b",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
+};
+
+struct iwl_cfg iwl6030_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 ABG",
+	IWL_DEVICE_6030,
+};
+
+struct iwl_cfg iwl6030_2bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 BGN",
+	IWL_DEVICE_6030,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-};
-
-struct iwl_cfg iwl6000g2b_2abg_cfg = {
-	.name = "6000 Series 2x2 ABG Gen2b",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-};
-
-struct iwl_cfg iwl6000g2b_2bgn_cfg = {
-	.name = "6000 Series 2x2 BGN Gen2b",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.sku = IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
+};
+
+struct iwl_cfg iwl6030_2bg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N 6230 BG",
+	IWL_DEVICE_6030,
+};
+
+struct iwl_cfg iwl1030_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 1030 BGN",
+	IWL_DEVICE_6030,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-};
-
-struct iwl_cfg iwl6000g2b_2bg_cfg = {
-	.name = "6000 Series 2x2 BG Gen2b",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.sku = IWL_SKU_G,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-};
-
-struct iwl_cfg iwl6000g2b_bgn_cfg = {
-	.name = "6000 Series 1x2 BGN Gen2b",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.sku = IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
+};
+
+struct iwl_cfg iwl1030_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 1030 BG",
+	IWL_DEVICE_6030,
+};
+
+struct iwl_cfg iwl130_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 130 BGN",
+	IWL_DEVICE_6030,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-};
-
-struct iwl_cfg iwl6000g2b_bg_cfg = {
-	.name = "6000 Series 1x2 BG Gen2b",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL6000G2_UCODE_API_MAX,
-	.ucode_api_min = IWL6000G2_UCODE_API_MIN,
-	.sku = IWL_SKU_G,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
-	.need_dc_calib = true,
-	.need_temp_offset_calib = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+	.rx_with_siso_diversity = true,
+};
+
+struct iwl_cfg iwl130_bg_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N 130 BG",
+	IWL_DEVICE_6030,
+	.rx_with_siso_diversity = true,
 };
 
 /*
  * "i": Internal configuration, use internal Power Amplifier
  */
+#define IWL_DEVICE_6000i					\
+	.fw_name_pre = IWL6000_FW_PRE,				\
+	.ucode_api_max = IWL6000_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6000_UCODE_API_MIN,			\
+	.valid_tx_ant = ANT_BC,		/* .cfg overwrite */	\
+	.valid_rx_ant = ANT_BC,		/* .cfg overwrite */	\
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,	\
+	.ops = &iwl6000_ops,					\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl6000_base_params,			\
+	.pa_type = IWL_PA_INTERNAL,				\
+	.led_mode = IWL_LED_BLINK
+
 struct iwl_cfg iwl6000i_2agn_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
-	.fw_name_pre = IWL6000_FW_PRE,
-	.ucode_api_max = IWL6000_UCODE_API_MAX,
-	.ucode_api_min = IWL6000_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_BC,
-	.valid_rx_ant = ANT_BC,
-	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
+	IWL_DEVICE_6000i,
 	.ht_params = &iwl6000_ht_params,
-	.pa_type = IWL_PA_INTERNAL,
 };
 
 struct iwl_cfg iwl6000i_2abg_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
-	.fw_name_pre = IWL6000_FW_PRE,
-	.ucode_api_max = IWL6000_UCODE_API_MAX,
-	.ucode_api_min = IWL6000_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G,
-	.valid_tx_ant = ANT_BC,
-	.valid_rx_ant = ANT_BC,
-	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
-	.pa_type = IWL_PA_INTERNAL,
+	IWL_DEVICE_6000i,
 };
 
 struct iwl_cfg iwl6000i_2bg_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
-	.fw_name_pre = IWL6000_FW_PRE,
-	.ucode_api_max = IWL6000_UCODE_API_MAX,
-	.ucode_api_min = IWL6000_UCODE_API_MIN,
-	.sku = IWL_SKU_G,
-	.valid_tx_ant = ANT_BC,
-	.valid_rx_ant = ANT_BC,
-	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
-	.ops = &iwl6000_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_base_params,
-	.pa_type = IWL_PA_INTERNAL,
-};
+	IWL_DEVICE_6000i,
+};
+
+#define IWL_DEVICE_6050						\
+	.fw_name_pre = IWL6050_FW_PRE,				\
+	.ucode_api_max = IWL6050_UCODE_API_MAX,			\
+	.ucode_api_min = IWL6050_UCODE_API_MIN,			\
+	.ops = &iwl6050_ops,					\
+	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,		\
+	.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,	\
+	.mod_params = &iwlagn_mod_params,			\
+	.base_params = &iwl6050_base_params,			\
+	.need_dc_calib = true,					\
+	.led_mode = IWL_LED_BLINK,				\
+	.internal_wimax_coex = true
 
 struct iwl_cfg iwl6050_2agn_cfg = {
 	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
-	.fw_name_pre = IWL6050_FW_PRE,
-	.ucode_api_max = IWL6050_UCODE_API_MAX,
-	.ucode_api_min = IWL6050_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_AB,
-	.ops = &iwl6050_ops,
-	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6050_base_params,
+	IWL_DEVICE_6050,
 	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
 };
 
-struct iwl_cfg iwl6050g2_bgn_cfg = {
-	.name = "6050 Series 1x2 BGN Gen2",
+struct iwl_cfg iwl6050_2abg_cfg = {
+	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
+	IWL_DEVICE_6050,
+};
+
+struct iwl_cfg iwl6150_bgn_cfg = {
+	.name = "Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN",
 	.fw_name_pre = IWL6050_FW_PRE,
 	.ucode_api_max = IWL6050_UCODE_API_MAX,
 	.ucode_api_min = IWL6050_UCODE_API_MIN,
-	.sku = IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_AB,
 	.eeprom_ver = EEPROM_6050G2_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_6050G2_TX_POWER_VERSION,
 	.ops = &iwl6050g2_ops,
@@ -804,22 +713,8 @@ struct iwl_cfg iwl6050g2_bgn_cfg = {
 	.base_params = &iwl6050_base_params,
 	.ht_params = &iwl6000_ht_params,
 	.need_dc_calib = true,
-};
-
-struct iwl_cfg iwl6050_2abg_cfg = {
-	.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
-	.fw_name_pre = IWL6050_FW_PRE,
-	.ucode_api_max = IWL6050_UCODE_API_MAX,
-	.ucode_api_min = IWL6050_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G,
-	.valid_tx_ant = ANT_AB,
-	.valid_rx_ant = ANT_AB,
-	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
-	.ops = &iwl6050_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6050_base_params,
-	.need_dc_calib = true,
+	.led_mode = IWL_LED_RF_STATE,
+	.internal_wimax_coex = true,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
@@ -827,9 +722,6 @@ struct iwl_cfg iwl6000_3agn_cfg = {
 	.fw_name_pre = IWL6000_FW_PRE,
 	.ucode_api_max = IWL6000_UCODE_API_MAX,
 	.ucode_api_min = IWL6000_UCODE_API_MIN,
-	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_ABC,
-	.valid_rx_ant = ANT_ABC,
 	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
 	.ops = &iwl6000_ops,
@@ -837,49 +729,10 @@ struct iwl_cfg iwl6000_3agn_cfg = {
 	.base_params = &iwl6000_base_params,
 	.ht_params = &iwl6000_ht_params,
 	.need_dc_calib = true,
-};
-
-struct iwl_cfg iwl130_bgn_cfg = {
-	.name = "Intel(R) 130 Series 1x1 BGN",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL130_UCODE_API_MAX,
-	.ucode_api_min = IWL130_UCODE_API_MIN,
-	.sku = IWL_SKU_G|IWL_SKU_N,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_A,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
-	.ht_params = &iwl6000_ht_params,
-	.need_dc_calib = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
-};
-
-struct iwl_cfg iwl130_bg_cfg = {
-	.name = "Intel(R) 130 Series 1x2 BG",
-	.fw_name_pre = IWL6000G2B_FW_PRE,
-	.ucode_api_max = IWL130_UCODE_API_MAX,
-	.ucode_api_min = IWL130_UCODE_API_MIN,
-	.sku = IWL_SKU_G,
-	.valid_tx_ant = ANT_A,
-	.valid_rx_ant = ANT_A,
-	.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
-	.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
-	.ops = &iwl6000g2b_ops,
-	.mod_params = &iwlagn_mod_params,
-	.base_params = &iwl6000_coex_base_params,
-	.bt_params = &iwl6000_bt_params,
-	.need_dc_calib = true,
-	/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
-	.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
+	.led_mode = IWL_LED_BLINK,
 };
 
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL6000G2B_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
-MODULE_FIRMWARE(IWL130_MODULE_FIRMWARE(IWL130_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
index e2019e75693..d16bb5ede01 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
@@ -732,8 +732,122 @@ static inline u8 find_first_chain(u8 mask)
 	return CHAIN_C;
 }
 
+/**
+ * Run disconnected antenna algorithm to find out which antennas are
+ * disconnected.
+ */
+static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
+				     struct iwl_chain_noise_data *data)
+{
+	u32 active_chains = 0;
+	u32 max_average_sig;
+	u16 max_average_sig_antenna_i;
+	u8 num_tx_chains;
+	u8 first_chain;
+	u16 i = 0;
+
+	average_sig[0] = data->chain_signal_a /
+			 priv->cfg->base_params->chain_noise_num_beacons;
+	average_sig[1] = data->chain_signal_b /
+			 priv->cfg->base_params->chain_noise_num_beacons;
+	average_sig[2] = data->chain_signal_c /
+			 priv->cfg->base_params->chain_noise_num_beacons;
+
+	if (average_sig[0] >= average_sig[1]) {
+		max_average_sig = average_sig[0];
+		max_average_sig_antenna_i = 0;
+		active_chains = (1 << max_average_sig_antenna_i);
+	} else {
+		max_average_sig = average_sig[1];
+		max_average_sig_antenna_i = 1;
+		active_chains = (1 << max_average_sig_antenna_i);
+	}
+
+	if (average_sig[2] >= max_average_sig) {
+		max_average_sig = average_sig[2];
+		max_average_sig_antenna_i = 2;
+		active_chains = (1 << max_average_sig_antenna_i);
+	}
+
+	IWL_DEBUG_CALIB(priv, "average_sig: a %d b %d c %d\n",
+		     average_sig[0], average_sig[1], average_sig[2]);
+	IWL_DEBUG_CALIB(priv, "max_average_sig = %d, antenna %d\n",
+		     max_average_sig, max_average_sig_antenna_i);
+
+	/* Compare signal strengths for all 3 receivers. */
+	for (i = 0; i < NUM_RX_CHAINS; i++) {
+		if (i != max_average_sig_antenna_i) {
+			s32 rssi_delta = (max_average_sig - average_sig[i]);
+
+			/* If signal is very weak, compared with
+			 * strongest, mark it as disconnected. */
+			if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
+				data->disconn_array[i] = 1;
+			else
+				active_chains |= (1 << i);
+			IWL_DEBUG_CALIB(priv, "i = %d  rssiDelta = %d  "
+			     "disconn_array[i] = %d\n",
+			     i, rssi_delta, data->disconn_array[i]);
+		}
+	}
+
+	/*
+	 * The above algorithm sometimes fails when the ucode
+	 * reports 0 for all chains. It's not clear why that
+	 * happens to start with, but it is then causing trouble
+	 * because this can make us enable more chains than the
+	 * hardware really has.
+	 *
+	 * To be safe, simply mask out any chains that we know
+	 * are not on the device.
+	 */
+	active_chains &= priv->hw_params.valid_rx_ant;
+
+	num_tx_chains = 0;
+	for (i = 0; i < NUM_RX_CHAINS; i++) {
+		/* loops on all the bits of
+		 * priv->hw_setting.valid_tx_ant */
+		u8 ant_msk = (1 << i);
+		if (!(priv->hw_params.valid_tx_ant & ant_msk))
+			continue;
+
+		num_tx_chains++;
+		if (data->disconn_array[i] == 0)
+			/* there is a Tx antenna connected */
+			break;
+		if (num_tx_chains == priv->hw_params.tx_chains_num &&
+		    data->disconn_array[i]) {
+			/*
+			 * If all chains are disconnected
+			 * connect the first valid tx chain
+			 */
+			first_chain =
+				find_first_chain(priv->cfg->valid_tx_ant);
+			data->disconn_array[first_chain] = 0;
+			active_chains |= BIT(first_chain);
+			IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \
+					W/A - declare %d as connected\n",
+					first_chain);
+			break;
+		}
+	}
+
+	if (active_chains != priv->hw_params.valid_rx_ant &&
+	    active_chains != priv->chain_noise_data.active_chains)
+		IWL_DEBUG_CALIB(priv,
+				"Detected that not all antennas are connected! "
+				"Connected: %#x, valid: %#x.\n",
+				active_chains, priv->hw_params.valid_rx_ant);
+
+	/* Save for use within RXON, TX, SCAN commands, etc. */
+	data->active_chains = active_chains;
+	IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n",
+			active_chains);
+}
+
+
 /*
- * Accumulate 20 beacons of signal and noise statistics for each of
+ * Accumulate 16 beacons of signal and noise statistics for each of
  *   3 receivers/antennas/rx-chains, then figure out:
  * 1)  Which antennas are connected.
  * 2)  Differential rx gain settings to balance the 3 receivers.
@@ -750,8 +864,6 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 	u32 chain_sig_c;
 	u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
 	u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
-	u32 max_average_sig;
-	u16 max_average_sig_antenna_i;
 	u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE;
 	u16 min_average_noise_antenna_i = INITIALIZATION_VALUE;
 	u16 i = 0;
@@ -759,11 +871,9 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 	u16 stat_chnum = INITIALIZATION_VALUE;
 	u8 rxon_band24;
 	u8 stat_band24;
-	u32 active_chains = 0;
-	u8 num_tx_chains;
 	unsigned long flags;
 	struct statistics_rx_non_phy *rx_info;
-	u8 first_chain;
+
 	/*
 	 * MULTI-FIXME:
 	 * When we support multiple interfaces on different channels,
@@ -869,108 +979,16 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv, void *stat_resp)
 		return;
 
 	/* Analyze signal for disconnected antenna */
-	average_sig[0] = data->chain_signal_a /
-			 priv->cfg->base_params->chain_noise_num_beacons;
-	average_sig[1] = data->chain_signal_b /
-			 priv->cfg->base_params->chain_noise_num_beacons;
-	average_sig[2] = data->chain_signal_c /
-			 priv->cfg->base_params->chain_noise_num_beacons;
-
-	if (average_sig[0] >= average_sig[1]) {
-		max_average_sig = average_sig[0];
-		max_average_sig_antenna_i = 0;
-		active_chains = (1 << max_average_sig_antenna_i);
-	} else {
-		max_average_sig = average_sig[1];
-		max_average_sig_antenna_i = 1;
-		active_chains = (1 << max_average_sig_antenna_i);
-	}
-
-	if (average_sig[2] >= max_average_sig) {
-		max_average_sig = average_sig[2];
-		max_average_sig_antenna_i = 2;
-		active_chains = (1 << max_average_sig_antenna_i);
-	}
-
-	IWL_DEBUG_CALIB(priv, "average_sig: a %d b %d c %d\n",
-		     average_sig[0], average_sig[1], average_sig[2]);
-	IWL_DEBUG_CALIB(priv, "max_average_sig = %d, antenna %d\n",
-		     max_average_sig, max_average_sig_antenna_i);
-
-	/* Compare signal strengths for all 3 receivers. */
-	for (i = 0; i < NUM_RX_CHAINS; i++) {
-		if (i != max_average_sig_antenna_i) {
-			s32 rssi_delta = (max_average_sig - average_sig[i]);
-
-			/* If signal is very weak, compared with
-			 * strongest, mark it as disconnected. */
-			if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
-				data->disconn_array[i] = 1;
-			else
-				active_chains |= (1 << i);
-			IWL_DEBUG_CALIB(priv, "i = %d  rssiDelta = %d  "
-			     "disconn_array[i] = %d\n",
-			     i, rssi_delta, data->disconn_array[i]);
-		}
-	}
-
-	/*
-	 * The above algorithm sometimes fails when the ucode
-	 * reports 0 for all chains. It's not clear why that
-	 * happens to start with, but it is then causing trouble
-	 * because this can make us enable more chains than the
-	 * hardware really has.
-	 *
-	 * To be safe, simply mask out any chains that we know
-	 * are not on the device.
-	 */
 	if (priv->cfg->bt_params &&
-	    priv->cfg->bt_params->advanced_bt_coexist &&
-	    priv->bt_full_concurrent) {
-		/* operated as 1x1 in full concurrency mode */
-		active_chains &= first_antenna(priv->hw_params.valid_rx_ant);
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		/* Disable disconnected antenna algorithm for advanced
+		   bt coex, assuming valid antennas are connected */
+		data->active_chains = priv->hw_params.valid_rx_ant;
+		for (i = 0; i < NUM_RX_CHAINS; i++)
+			if (!(data->active_chains & (1<<i)))
+				data->disconn_array[i] = 1;
 	} else
-		active_chains &= priv->hw_params.valid_rx_ant;
-
-	num_tx_chains = 0;
-	for (i = 0; i < NUM_RX_CHAINS; i++) {
-		/* loops on all the bits of
-		 * priv->hw_setting.valid_tx_ant */
-		u8 ant_msk = (1 << i);
-		if (!(priv->hw_params.valid_tx_ant & ant_msk))
-			continue;
-
-		num_tx_chains++;
-		if (data->disconn_array[i] == 0)
-			/* there is a Tx antenna connected */
-			break;
-		if (num_tx_chains == priv->hw_params.tx_chains_num &&
-		    data->disconn_array[i]) {
-			/*
-			 * If all chains are disconnected
-			 * connect the first valid tx chain
-			 */
-			first_chain =
-				find_first_chain(priv->cfg->valid_tx_ant);
-			data->disconn_array[first_chain] = 0;
-			active_chains |= BIT(first_chain);
-			IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected W/A - declare %d as connected\n",
-					first_chain);
-			break;
-		}
-	}
-
-	if (active_chains != priv->hw_params.valid_rx_ant &&
-	    active_chains != priv->chain_noise_data.active_chains)
-		IWL_DEBUG_CALIB(priv,
-				"Detected that not all antennas are connected! "
-				"Connected: %#x, valid: %#x.\n",
-				active_chains, priv->hw_params.valid_rx_ant);
-
-	/* Save for use within RXON, TX, SCAN commands, etc. */
-	priv->chain_noise_data.active_chains = active_chains;
-	IWL_DEBUG_CALIB(priv, "active_chains (bitwise) = 0x%x\n",
-			active_chains);
+		iwl_find_disconn_antenna(priv, average_sig, data);
 
 	/* Analyze noise for rx balance */
 	average_noise[0] = data->chain_noise_a /
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
index a358d4334a1..a6dbd8983da 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-debugfs.c
@@ -856,6 +856,9 @@ ssize_t iwl_ucode_bt_stats_read(struct file *file,
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
 
+	if (!priv->bt_enable_flag)
+		return -EINVAL;
+
 	/* make request to uCode to retrieve statistics information */
 	mutex_lock(&priv->mutex);
 	ret = iwl_send_statistics_request(priv, CMD_SYNC, false);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c
index a650baba080..97906dd442e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-eeprom.c
@@ -75,109 +75,6 @@
 #include "iwl-agn.h"
 #include "iwl-io.h"
 
-/************************** EEPROM BANDS ****************************
- *
- * The iwl_eeprom_band definitions below provide the mapping from the
- * EEPROM contents to the specific channel number supported for each
- * band.
- *
- * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3
- * definition below maps to physical channel 42 in the 5.2GHz spectrum.
- * The specific geography and calibration information for that channel
- * is contained in the eeprom map itself.
- *
- * During init, we copy the eeprom information and channel map
- * information into priv->channel_info_24/52 and priv->channel_map_24/52
- *
- * channel_map_24/52 provides the index in the channel_info array for a
- * given channel.  We have to have two separate maps as there is channel
- * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
- * band_2
- *
- * A value of 0xff stored in the channel_map indicates that the channel
- * is not supported by the hardware at all.
- *
- * A value of 0xfe in the channel_map indicates that the channel is not
- * valid for Tx with the current hardware.  This means that
- * while the system can tune and receive on a given channel, it may not
- * be able to associate or transmit any frames on that
- * channel.  There is no corresponding channel information for that
- * entry.
- *
- *********************************************************************/
-
-/**
- * struct iwl_txpwr_section: eeprom section information
- * @offset: indirect address into eeprom image
- * @count: number of "struct iwl_eeprom_enhanced_txpwr" in this section
- * @band: band type for the section
- * @is_common - true: common section, false: channel section
- * @is_cck - true: cck section, false: not cck section
- * @is_ht_40 - true: all channel in the section are HT40 channel,
- *	       false: legacy or HT 20 MHz
- *	       ignore if it is common section
- * @iwl_eeprom_section_channel: channel array in the section,
- *	       ignore if common section
- */
-struct iwl_txpwr_section {
-	u32 offset;
-	u8 count;
-	enum ieee80211_band band;
-	bool is_common;
-	bool is_cck;
-	bool is_ht40;
-	u8 iwl_eeprom_section_channel[EEPROM_MAX_TXPOWER_SECTION_ELEMENTS];
-};
-
-/**
- * section 1 - 3 are regulatory tx power apply to all channels based on
- *    modulation: CCK, OFDM
- *    Band: 2.4GHz, 5.2GHz
- * section 4 - 10 are regulatory tx power apply to specified channels
- *    For example:
- *	1L - Channel 1 Legacy
- *	1HT - Channel 1 HT
- *	(1,+1) - Channel 1 HT40 "_above_"
- *
- * Section 1: all CCK channels
- * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40) channels
- * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
- * Section 4: 2.4 GHz 20MHz channels: 1L, 1HT, 2L, 2HT, 10L, 10HT, 11L, 11HT
- * Section 5: 2.4 GHz 40MHz channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1)
- * Section 6: 5.2 GHz 20MHz channels: 36L, 64L, 100L, 36HT, 64HT, 100HT
- * Section 7: 5.2 GHz 40MHz channels: (36,+1) (60,+1) (100,+1)
- * Section 8: 2.4 GHz channel: 13L, 13HT
- * Section 9: 2.4 GHz channel: 140L, 140HT
- * Section 10: 2.4 GHz 40MHz channels: (132,+1)  (44,+1)
- *
- */
-static const struct iwl_txpwr_section enhinfo[] = {
-	{ EEPROM_LB_CCK_20_COMMON, 1, IEEE80211_BAND_2GHZ, true, true, false },
-	{ EEPROM_LB_OFDM_COMMON, 3, IEEE80211_BAND_2GHZ, true, false, false },
-	{ EEPROM_HB_OFDM_COMMON, 3, IEEE80211_BAND_5GHZ, true, false, false },
-	{ EEPROM_LB_OFDM_20_BAND, 8, IEEE80211_BAND_2GHZ,
-		false, false, false,
-		{1, 1, 2, 2, 10, 10, 11, 11 } },
-	{ EEPROM_LB_OFDM_HT40_BAND, 5, IEEE80211_BAND_2GHZ,
-		false, false, true,
-		{ 1, 2, 6, 7, 9 } },
-	{ EEPROM_HB_OFDM_20_BAND, 6, IEEE80211_BAND_5GHZ,
-		false, false, false,
-		{ 36, 64, 100, 36, 64, 100 } },
-	{ EEPROM_HB_OFDM_HT40_BAND, 3, IEEE80211_BAND_5GHZ,
-		false, false, true,
-		{ 36, 60, 100 } },
-	{ EEPROM_LB_OFDM_20_CHANNEL_13, 2, IEEE80211_BAND_2GHZ,
-		false, false, false,
-		{ 13, 13 } },
-	{ EEPROM_HB_OFDM_20_CHANNEL_140, 2, IEEE80211_BAND_5GHZ,
-		false, false, false,
-		{ 140, 140 } },
-	{ EEPROM_HB_OFDM_HT40_BAND_1, 2, IEEE80211_BAND_5GHZ,
-		false, false, true,
-		{ 132, 44 } },
-};
-
 /******************************************************************************
  *
  * EEPROM related functions
@@ -248,6 +145,47 @@ err:
 
 }
 
+int iwl_eeprom_check_sku(struct iwl_priv *priv)
+{
+	u16 eeprom_sku;
+	u16 radio_cfg;
+
+	eeprom_sku = iwl_eeprom_query16(priv, EEPROM_SKU_CAP);
+
+	priv->cfg->sku = ((eeprom_sku & EEPROM_SKU_CAP_BAND_SELECTION) >>
+			EEPROM_SKU_CAP_BAND_POS);
+	if (eeprom_sku & EEPROM_SKU_CAP_11N_ENABLE)
+		priv->cfg->sku |= IWL_SKU_N;
+
+	if (!priv->cfg->sku) {
+		IWL_ERR(priv, "Invalid device sku\n");
+		return -EINVAL;
+	}
+
+	IWL_INFO(priv, "Device SKU: 0X%x\n", priv->cfg->sku);
+
+	if (!priv->cfg->valid_tx_ant && !priv->cfg->valid_rx_ant) {
+		/* not using .cfg overwrite */
+		radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
+		priv->cfg->valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg);
+		priv->cfg->valid_rx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg);
+		if (!priv->cfg->valid_tx_ant || !priv->cfg->valid_rx_ant) {
+			IWL_ERR(priv, "Invalid chain (0X%x, 0X%x)\n",
+				priv->cfg->valid_tx_ant,
+				priv->cfg->valid_rx_ant);
+			return -EINVAL;
+		}
+		IWL_INFO(priv, "Valid Tx ant: 0X%x, Valid Rx ant: 0X%x\n",
+			 priv->cfg->valid_tx_ant, priv->cfg->valid_rx_ant);
+	}
+	/*
+	 * for some special cases,
+	 * EEPROM did not reflect the correct antenna setting
+	 * so overwrite the valid tx/rx antenna from .cfg
+	 */
+	return 0;
+}
+
 void iwl_eeprom_get_mac(const struct iwl_priv *priv, u8 *mac)
 {
 	const u8 *addr = priv->cfg->ops->lib->eeprom_ops.query_addr(priv,
@@ -265,15 +203,6 @@ static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
 {
 	s8 max_txpower_avg = 0; /* (dBm) */
 
-	IWL_DEBUG_INFO(priv, "%d - "
-			"chain_a: %d dB chain_b: %d dB "
-			"chain_c: %d dB mimo2: %d dB mimo3: %d dB\n",
-			element,
-			enhanced_txpower[element].chain_a_max >> 1,
-			enhanced_txpower[element].chain_b_max >> 1,
-			enhanced_txpower[element].chain_c_max >> 1,
-			enhanced_txpower[element].mimo2_max >> 1,
-			enhanced_txpower[element].mimo3_max >> 1);
 	/* Take the highest tx power from any valid chains */
 	if ((priv->cfg->valid_tx_ant & ANT_A) &&
 	    (enhanced_txpower[element].chain_a_max > max_txpower_avg))
@@ -303,152 +232,106 @@ static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
 	return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1);
 }
 
-/**
- * iwl_update_common_txpower: update channel tx power
- *     update tx power per band based on EEPROM enhanced tx power info.
- */
-static s8 iwl_update_common_txpower(struct iwl_priv *priv,
-		struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
-		int section, int element, s8 *max_txpower_in_half_dbm)
+static void
+iwlcore_eeprom_enh_txp_read_element(struct iwl_priv *priv,
+				    struct iwl_eeprom_enhanced_txpwr *txp,
+				    s8 max_txpower_avg)
 {
-	struct iwl_channel_info *ch_info;
-	int ch;
-	bool is_ht40 = false;
-	s8 max_txpower_avg; /* (dBm) */
-
-	/* it is common section, contain all type (Legacy, HT and HT40)
-	 * based on the element in the section to determine
-	 * is it HT 40 or not
-	 */
-	if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX)
-		is_ht40 = true;
-	max_txpower_avg =
-		iwl_get_max_txpower_avg(priv, enhanced_txpower,
-					element, max_txpower_in_half_dbm);
-
-	ch_info = priv->channel_info;
-
-	for (ch = 0; ch < priv->channel_count; ch++) {
-		/* find matching band and update tx power if needed */
-		if ((ch_info->band == enhinfo[section].band) &&
-		    (ch_info->max_power_avg < max_txpower_avg) &&
-		    (!is_ht40)) {
-			/* Update regulatory-based run-time data */
-			ch_info->max_power_avg = ch_info->curr_txpow =
-				max_txpower_avg;
+	int ch_idx;
+	bool is_ht40 = txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ;
+	enum ieee80211_band band;
+
+	band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
+		IEEE80211_BAND_5GHZ : IEEE80211_BAND_2GHZ;
+
+	for (ch_idx = 0; ch_idx < priv->channel_count; ch_idx++) {
+		struct iwl_channel_info *ch_info = &priv->channel_info[ch_idx];
+
+		/* update matching channel or from common data only */
+		if (txp->channel != 0 && ch_info->channel != txp->channel)
+			continue;
+
+		/* update matching band only */
+		if (band != ch_info->band)
+			continue;
+
+		if (ch_info->max_power_avg < max_txpower_avg && !is_ht40) {
+			ch_info->max_power_avg = max_txpower_avg;
+			ch_info->curr_txpow = max_txpower_avg;
 			ch_info->scan_power = max_txpower_avg;
 		}
-		if ((ch_info->band == enhinfo[section].band) && is_ht40 &&
-		    (ch_info->ht40_max_power_avg < max_txpower_avg)) {
-			/* Update regulatory-based run-time data */
+
+		if (is_ht40 && ch_info->ht40_max_power_avg < max_txpower_avg)
 			ch_info->ht40_max_power_avg = max_txpower_avg;
-		}
-		ch_info++;
 	}
-	return max_txpower_avg;
 }
 
-/**
- * iwl_update_channel_txpower: update channel tx power
- *      update channel tx power based on EEPROM enhanced tx power info.
- */
-static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
-		struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
-		int section, int element, s8 *max_txpower_in_half_dbm)
-{
-	struct iwl_channel_info *ch_info;
-	int ch;
-	u8 channel;
-	s8 max_txpower_avg; /* (dBm) */
-
-	channel = enhinfo[section].iwl_eeprom_section_channel[element];
-	max_txpower_avg =
-		iwl_get_max_txpower_avg(priv, enhanced_txpower,
-					element, max_txpower_in_half_dbm);
-
-	ch_info = priv->channel_info;
-	for (ch = 0; ch < priv->channel_count; ch++) {
-		/* find matching channel and update tx power if needed */
-		if (ch_info->channel == channel) {
-			if ((ch_info->max_power_avg < max_txpower_avg) &&
-			    (!enhinfo[section].is_ht40)) {
-				/* Update regulatory-based run-time data */
-				ch_info->max_power_avg = max_txpower_avg;
-				ch_info->curr_txpow = max_txpower_avg;
-				ch_info->scan_power = max_txpower_avg;
-			}
-			if ((enhinfo[section].is_ht40) &&
-			    (ch_info->ht40_max_power_avg < max_txpower_avg)) {
-				/* Update regulatory-based run-time data */
-				ch_info->ht40_max_power_avg = max_txpower_avg;
-			}
-			break;
-		}
-		ch_info++;
-	}
-	return max_txpower_avg;
-}
+#define EEPROM_TXP_OFFS	(0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT)
+#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
+#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
+
+#define TXP_CHECK_AND_PRINT(x) ((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) \
+			    ? # x " " : "")
 
-/**
- * iwlcore_eeprom_enhanced_txpower: process enhanced tx power info
- */
 void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
 {
-	int eeprom_section_count = 0;
-	int section, element;
-	struct iwl_eeprom_enhanced_txpwr *enhanced_txpower;
-	u32 offset;
-	s8 max_txpower_avg; /* (dBm) */
-	s8 max_txpower_in_half_dbm; /* (half-dBm) */
-
-	/* Loop through all the sections
-	 * adjust bands and channel's max tx power
-	 * Set the tx_power_user_lmt to the highest power
-	 * supported by any channels and chains
-	 */
-	for (section = 0; section < ARRAY_SIZE(enhinfo); section++) {
-		eeprom_section_count = enhinfo[section].count;
-		offset = enhinfo[section].offset;
-		enhanced_txpower = (struct iwl_eeprom_enhanced_txpwr *)
-				iwl_eeprom_query_addr(priv, offset);
+	struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
+	int idx, entries;
+	__le16 *txp_len;
+	s8 max_txp_avg, max_txp_avg_halfdbm;
+
+	BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8);
+
+	/* the length is in 16-bit words, but we want entries */
+	txp_len = (__le16 *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_SZ_OFFS);
+	entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
+
+	txp_array = (void *) iwlagn_eeprom_query_addr(priv, EEPROM_TXP_OFFS);
+
+	for (idx = 0; idx < entries; idx++) {
+		txp = &txp_array[idx];
+		/* skip invalid entries */
+		if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
+			continue;
+
+		IWL_DEBUG_EEPROM(priv, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n",
+				 (txp->channel && (txp->flags &
+					IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ?
+					"Common " : (txp->channel) ?
+					"Channel" : "Common",
+				 (txp->channel),
+				 TXP_CHECK_AND_PRINT(VALID),
+				 TXP_CHECK_AND_PRINT(BAND_52G),
+				 TXP_CHECK_AND_PRINT(OFDM),
+				 TXP_CHECK_AND_PRINT(40MHZ),
+				 TXP_CHECK_AND_PRINT(HT_AP),
+				 TXP_CHECK_AND_PRINT(RES1),
+				 TXP_CHECK_AND_PRINT(RES2),
+				 TXP_CHECK_AND_PRINT(COMMON_TYPE),
+				 txp->flags);
+		IWL_DEBUG_EEPROM(priv, "\t\t chain_A: 0x%02x "
+				 "chain_B: 0X%02x chain_C: 0X%02x\n",
+				 txp->chain_a_max, txp->chain_b_max,
+				 txp->chain_c_max);
+		IWL_DEBUG_EEPROM(priv, "\t\t MIMO2: 0x%02x "
+				 "MIMO3: 0x%02x High 20_on_40: 0x%02x "
+				 "Low 20_on_40: 0x%02x\n",
+				 txp->mimo2_max, txp->mimo3_max,
+				 ((txp->delta_20_in_40 & 0xf0) >> 4),
+				 (txp->delta_20_in_40 & 0x0f));
+
+		max_txp_avg = iwl_get_max_txpower_avg(priv, txp_array, idx,
+						      &max_txp_avg_halfdbm);
 
 		/*
-		 * check for valid entry -
-		 * different version of EEPROM might contain different set
-		 * of enhanced tx power table
-		 * always check for valid entry before process
-		 * the information
+		 * Update the user limit values values to the highest
+		 * power supported by any channel
 		 */
-		if (!enhanced_txpower->common || enhanced_txpower->reserved)
-			continue;
+		if (max_txp_avg > priv->tx_power_user_lmt)
+			priv->tx_power_user_lmt = max_txp_avg;
+		if (max_txp_avg_halfdbm > priv->tx_power_lmt_in_half_dbm)
+			priv->tx_power_lmt_in_half_dbm = max_txp_avg_halfdbm;
 
-		for (element = 0; element < eeprom_section_count; element++) {
-			if (enhinfo[section].is_common)
-				max_txpower_avg =
-					iwl_update_common_txpower(priv,
-						enhanced_txpower, section,
-						element,
-						&max_txpower_in_half_dbm);
-			else
-				max_txpower_avg =
-					iwl_update_channel_txpower(priv,
-						enhanced_txpower, section,
-						element,
-						&max_txpower_in_half_dbm);
-
-			/* Update the tx_power_user_lmt to the highest power
-			 * supported by any channel */
-			if (max_txpower_avg > priv->tx_power_user_lmt)
-				priv->tx_power_user_lmt = max_txpower_avg;
-
-			/*
-			 * Update the tx_power_lmt_in_half_dbm to
-			 * the highest power supported by any channel
-			 */
-			if (max_txpower_in_half_dbm >
-			    priv->tx_power_lmt_in_half_dbm)
-				priv->tx_power_lmt_in_half_dbm =
-					max_txpower_in_half_dbm;
-		}
+		iwlcore_eeprom_enh_txp_read_element(priv, txp, max_txp_avg);
 	}
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
index ffb2f4111ad..366340f3fb0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-hcmd.c
@@ -307,6 +307,7 @@ static int iwlagn_set_pan_params(struct iwl_priv *priv)
 
 	if (ctx_bss->vif && ctx_pan->vif) {
 		int bcnint = ctx_pan->vif->bss_conf.beacon_int;
+		int dtim = ctx_pan->vif->bss_conf.dtim_period ?: 1;
 
 		/* should be set, but seems unused?? */
 		cmd.flags |= cpu_to_le16(IWL_WIPAN_PARAMS_FLG_SLOTTED_MODE);
@@ -329,10 +330,10 @@ static int iwlagn_set_pan_params(struct iwl_priv *priv)
 		if (test_bit(STATUS_SCAN_HW, &priv->status) ||
 		    (!ctx_bss->vif->bss_conf.idle &&
 		     !ctx_bss->vif->bss_conf.assoc)) {
-			slot0 = bcnint * 3 - 20;
+			slot0 = dtim * bcnint * 3 - 20;
 			slot1 = 20;
 		} else if (!ctx_pan->vif->bss_conf.idle &&
-                           !ctx_pan->vif->bss_conf.assoc) {
+			   !ctx_pan->vif->bss_conf.assoc) {
 			slot1 = bcnint * 3 - 20;
 			slot0 = 20;
 		}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index b555edd5335..3dee87e8f55 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -405,6 +405,7 @@ static void iwlagn_rx_reply_tx(struct iwl_priv *priv,
 		return;
 	}
 
+	txq->time_stamp = jiffies;
 	info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
 	memset(&info->status, 0, sizeof(info->status));
 
@@ -445,22 +446,17 @@ static void iwlagn_rx_reply_tx(struct iwl_priv *priv,
 
 			if (priv->mac80211_registered &&
 			    (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
-			    (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
-				if (agg->state == IWL_AGG_OFF)
-					iwl_wake_queue(priv, txq_id);
-				else
-					iwl_wake_queue(priv, txq->swq_id);
-			}
+			    (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA))
+				iwl_wake_queue(priv, txq);
 		}
 	} else {
-		BUG_ON(txq_id != txq->swq_id);
 		iwlagn_set_tx_status(priv, info, tx_resp, txq_id, false);
 		freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
 		iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
 
 		if (priv->mac80211_registered &&
 		    (iwl_queue_space(&txq->q) > txq->q.low_mark))
-			iwl_wake_queue(priv, txq_id);
+			iwl_wake_queue(priv, txq);
 	}
 
 	iwlagn_txq_check_empty(priv, sta_id, tid, txq_id);
@@ -496,6 +492,10 @@ int iwlagn_send_tx_power(struct iwl_priv *priv)
 	struct iwlagn_tx_power_dbm_cmd tx_power_cmd;
 	u8 tx_ant_cfg_cmd;
 
+	if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &priv->status),
+		      "TX Power requested while scanning!\n"))
+		return -EAGAIN;
+
 	/* half dBm need to multiply */
 	tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
 
@@ -522,9 +522,8 @@ int iwlagn_send_tx_power(struct iwl_priv *priv)
 	else
 		tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD;
 
-	return  iwl_send_cmd_pdu_async(priv, tx_ant_cfg_cmd,
-				       sizeof(tx_power_cmd), &tx_power_cmd,
-				       NULL);
+	return iwl_send_cmd_pdu(priv, tx_ant_cfg_cmd, sizeof(tx_power_cmd),
+				&tx_power_cmd);
 }
 
 void iwlagn_temperature(struct iwl_priv *priv)
@@ -569,6 +568,12 @@ static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address)
 	case INDIRECT_REGULATORY:
 		offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY);
 		break;
+	case INDIRECT_TXP_LIMIT:
+		offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT);
+		break;
+	case INDIRECT_TXP_LIMIT_SIZE:
+		offset = iwl_eeprom_query16(priv, EEPROM_LINK_TXP_LIMIT_SIZE);
+		break;
 	case INDIRECT_CALIBRATION:
 		offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION);
 		break;
@@ -750,6 +755,12 @@ int iwlagn_hw_nic_init(struct iwl_priv *priv)
 	} else
 		iwlagn_txq_ctx_reset(priv);
 
+	if (priv->cfg->base_params->shadow_reg_enable) {
+		/* enable shadow regs in HW */
+		iwl_set_bit(priv, CSR_MAC_SHADOW_REG_CTRL,
+			0x800FFFFF);
+	}
+
 	set_bit(STATUS_INIT, &priv->status);
 
 	return 0;
@@ -1481,15 +1492,11 @@ int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	if (priv->cfg->scan_rx_antennas[band])
 		rx_ant = priv->cfg->scan_rx_antennas[band];
 
-	if (priv->cfg->scan_tx_antennas[band])
-		scan_tx_antennas = priv->cfg->scan_tx_antennas[band];
-
-	if (priv->cfg->bt_params &&
-	    priv->cfg->bt_params->advanced_bt_coexist &&
-	    priv->bt_full_concurrent) {
-		/* operated as 1x1 in full concurrency mode */
-		scan_tx_antennas = first_antenna(
-			priv->cfg->scan_tx_antennas[band]);
+	if (band == IEEE80211_BAND_2GHZ &&
+	    priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		/* transmit 2.4 GHz probes only on first antenna */
+		scan_tx_antennas = first_antenna(scan_tx_antennas);
 	}
 
 	priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv, priv->scan_tx_ant[band],
@@ -1584,22 +1591,6 @@ int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	return ret;
 }
 
-void iwlagn_post_scan(struct iwl_priv *priv)
-{
-	struct iwl_rxon_context *ctx;
-
-	/*
-	 * Since setting the RXON may have been deferred while
-	 * performing the scan, fire one off if needed
-	 */
-	for_each_context(priv, ctx)
-		if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
-			iwlagn_commit_rxon(priv, ctx);
-
-	if (priv->cfg->ops->hcmd->set_pan_params)
-		priv->cfg->ops->hcmd->set_pan_params(priv);
-}
-
 int iwlagn_manage_ibss_station(struct iwl_priv *priv,
 			       struct ieee80211_vif *vif, bool add)
 {
@@ -1790,7 +1781,7 @@ static const __le32 iwlagn_def_3w_lookup[12] = {
 	cpu_to_le32(0xc0004000),
 	cpu_to_le32(0x00004000),
 	cpu_to_le32(0xf0005000),
-	cpu_to_le32(0xf0004000),
+	cpu_to_le32(0xf0005000),
 };
 
 static const __le32 iwlagn_concurrent_lookup[12] = {
@@ -1826,6 +1817,7 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
 		bt_cmd.prio_boost = 0;
 	bt_cmd.kill_ack_mask = priv->kill_ack_mask;
 	bt_cmd.kill_cts_mask = priv->kill_cts_mask;
+
 	bt_cmd.valid = priv->bt_valid;
 	bt_cmd.tx_prio_boost = 0;
 	bt_cmd.rx_prio_boost = 0;
@@ -1841,10 +1833,15 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
 	} else {
 		bt_cmd.flags = IWLAGN_BT_FLAG_COEX_MODE_3W <<
 					IWLAGN_BT_FLAG_COEX_MODE_SHIFT;
+		if (priv->cfg->bt_params &&
+		    priv->cfg->bt_params->bt_sco_disable)
+			bt_cmd.flags |= IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE;
+
 		if (priv->bt_ch_announce)
 			bt_cmd.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
 		IWL_DEBUG_INFO(priv, "BT coex flag: 0X%x\n", bt_cmd.flags);
 	}
+	priv->bt_enable_flag = bt_cmd.flags;
 	if (priv->bt_full_concurrent)
 		memcpy(bt_cmd.bt3_lookup_table, iwlagn_concurrent_lookup,
 			sizeof(iwlagn_concurrent_lookup));
@@ -1884,12 +1881,20 @@ static void iwlagn_bt_traffic_change_work(struct work_struct *work)
 	struct iwl_rxon_context *ctx;
 	int smps_request = -1;
 
+	/*
+	 * Note: bt_traffic_load can be overridden by scan complete and
+	 * coex profile notifications. Ignore that since only bad consequence
+	 * can be not matching debug print with actual state.
+	 */
 	IWL_DEBUG_INFO(priv, "BT traffic load changes: %d\n",
 		       priv->bt_traffic_load);
 
 	switch (priv->bt_traffic_load) {
 	case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
-		smps_request = IEEE80211_SMPS_AUTOMATIC;
+		if (priv->bt_status)
+			smps_request = IEEE80211_SMPS_DYNAMIC;
+		else
+			smps_request = IEEE80211_SMPS_AUTOMATIC;
 		break;
 	case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
 		smps_request = IEEE80211_SMPS_DYNAMIC;
@@ -1906,6 +1911,16 @@ static void iwlagn_bt_traffic_change_work(struct work_struct *work)
 
 	mutex_lock(&priv->mutex);
 
+	/*
+	 * We can not send command to firmware while scanning. When the scan
+	 * complete we will schedule this work again. We do check with mutex
+	 * locked to prevent new scan request to arrive. We do not check
+	 * STATUS_SCANNING to avoid race when queue_work two times from
+	 * different notifications, but quit and not perform any work at all.
+	 */
+	if (test_bit(STATUS_SCAN_HW, &priv->status))
+		goto out;
+
 	if (priv->cfg->ops->lib->update_chain_flags)
 		priv->cfg->ops->lib->update_chain_flags(priv);
 
@@ -1915,7 +1930,7 @@ static void iwlagn_bt_traffic_change_work(struct work_struct *work)
 				ieee80211_request_smps(ctx->vif, smps_request);
 		}
 	}
-
+out:
 	mutex_unlock(&priv->mutex);
 }
 
@@ -1986,24 +2001,29 @@ static void iwlagn_print_uartmsg(struct iwl_priv *priv,
 			BT_UART_MSG_FRAME7CONNECTABLE_POS);
 }
 
-static void iwlagn_set_kill_ack_msk(struct iwl_priv *priv,
-				     struct iwl_bt_uart_msg *uart_msg)
+static void iwlagn_set_kill_msk(struct iwl_priv *priv,
+				struct iwl_bt_uart_msg *uart_msg)
 {
-	u8 kill_ack_msk;
-	__le32 bt_kill_ack_msg[2] = {
-			cpu_to_le32(0xFFFFFFF), cpu_to_le32(0xFFFFFC00) };
-
-	kill_ack_msk = (((BT_UART_MSG_FRAME3A2DP_MSK |
-			BT_UART_MSG_FRAME3SNIFF_MSK |
-			BT_UART_MSG_FRAME3SCOESCO_MSK) &
-			uart_msg->frame3) == 0) ? 1 : 0;
-	if (priv->kill_ack_mask != bt_kill_ack_msg[kill_ack_msk]) {
+	u8 kill_msk;
+	static const __le32 bt_kill_ack_msg[2] = {
+		IWLAGN_BT_KILL_ACK_MASK_DEFAULT,
+		IWLAGN_BT_KILL_ACK_CTS_MASK_SCO };
+	static const __le32 bt_kill_cts_msg[2] = {
+		IWLAGN_BT_KILL_CTS_MASK_DEFAULT,
+		IWLAGN_BT_KILL_ACK_CTS_MASK_SCO };
+
+	kill_msk = (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3)
+		? 1 : 0;
+	if (priv->kill_ack_mask != bt_kill_ack_msg[kill_msk] ||
+	    priv->kill_cts_mask != bt_kill_cts_msg[kill_msk]) {
 		priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK;
-		priv->kill_ack_mask = bt_kill_ack_msg[kill_ack_msk];
+		priv->kill_ack_mask = bt_kill_ack_msg[kill_msk];
+		priv->bt_valid |= IWLAGN_BT_VALID_KILL_CTS_MASK;
+		priv->kill_cts_mask = bt_kill_cts_msg[kill_msk];
+
 		/* schedule to send runtime bt_config */
 		queue_work(priv->workqueue, &priv->bt_runtime_config);
 	}
-
 }
 
 void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
@@ -2014,7 +2034,6 @@ void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
 	struct iwl_bt_coex_profile_notif *coex = &pkt->u.bt_coex_profile_notif;
 	struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
 	struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg;
-	u8 last_traffic_load;
 
 	IWL_DEBUG_NOTIF(priv, "BT Coex notification:\n");
 	IWL_DEBUG_NOTIF(priv, "    status: %d\n", coex->bt_status);
@@ -2023,11 +2042,10 @@ void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
 			coex->bt_ci_compliance);
 	iwlagn_print_uartmsg(priv, uart_msg);
 
-	last_traffic_load = priv->notif_bt_traffic_load;
-	priv->notif_bt_traffic_load = coex->bt_traffic_load;
+	priv->last_bt_traffic_load = priv->bt_traffic_load;
 	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
 		if (priv->bt_status != coex->bt_status ||
-		    last_traffic_load != coex->bt_traffic_load) {
+		    priv->last_bt_traffic_load != coex->bt_traffic_load) {
 			if (coex->bt_status) {
 				/* BT on */
 				if (!priv->bt_ch_announce)
@@ -2056,7 +2074,7 @@ void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
 		}
 	}
 
-	iwlagn_set_kill_ack_msk(priv, uart_msg);
+	iwlagn_set_kill_msk(priv, uart_msg);
 
 	/* FIXME: based on notification, adjust the prio_boost */
 
@@ -2276,7 +2294,7 @@ static const char *get_csr_string(int cmd)
 void iwl_dump_csr(struct iwl_priv *priv)
 {
 	int i;
-	u32 csr_tbl[] = {
+	static const u32 csr_tbl[] = {
 		CSR_HW_IF_CONFIG_REG,
 		CSR_INT_COALESCING,
 		CSR_INT,
@@ -2335,7 +2353,7 @@ int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display)
 	int pos = 0;
 	size_t bufsz = 0;
 #endif
-	u32 fh_tbl[] = {
+	static const u32 fh_tbl[] = {
 		FH_RSCSR_CHNL0_STTS_WPTR_REG,
 		FH_RSCSR_CHNL0_RBDCB_BASE_REG,
 		FH_RSCSR_CHNL0_WPTR,
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 065553629de..75fcd30a7c1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -387,7 +387,7 @@ static int rs_tl_turn_on_agg_for_tid(struct iwl_priv *priv,
 	if (load > IWL_AGG_LOAD_THRESHOLD) {
 		IWL_DEBUG_HT(priv, "Starting Tx agg: STA: %pM tid: %d\n",
 				sta->addr, tid);
-		ret = ieee80211_start_tx_ba_session(sta, tid);
+		ret = ieee80211_start_tx_ba_session(sta, tid, 5000);
 		if (ret == -EAGAIN) {
 			/*
 			 * driver and mac80211 is out of sync
@@ -833,17 +833,23 @@ static void rs_bt_update_lq(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
 			    struct iwl_lq_sta *lq_sta)
 {
 	struct iwl_scale_tbl_info *tbl;
-	bool full_concurrent;
+	bool full_concurrent = priv->bt_full_concurrent;
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (priv->bt_ci_compliance && priv->bt_ant_couple_ok)
-		full_concurrent = true;
-	else
-		full_concurrent = false;
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (priv->bt_full_concurrent != full_concurrent) {
+	if (priv->bt_ant_couple_ok) {
+		/*
+		 * Is there a need to switch between
+		 * full concurrency and 3-wire?
+		 */
+		spin_lock_irqsave(&priv->lock, flags);
+		if (priv->bt_ci_compliance && priv->bt_ant_couple_ok)
+			full_concurrent = true;
+		else
+			full_concurrent = false;
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	if ((priv->bt_traffic_load != priv->last_bt_traffic_load) ||
+	    (priv->bt_full_concurrent != full_concurrent)) {
 		priv->bt_full_concurrent = full_concurrent;
 
 		/* Update uCode's rate table. */
@@ -1040,8 +1046,7 @@ done:
 	if (sta && sta->supp_rates[sband->band])
 		rs_rate_scale_perform(priv, skb, sta, lq_sta);
 
-	/* Is there a need to switch between full concurrency and 3-wire? */
-	if (priv->bt_ant_couple_ok)
+	if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist)
 		rs_bt_update_lq(priv, ctx, lq_sta);
 }
 
@@ -2868,6 +2873,10 @@ void iwl_rs_rate_init(struct iwl_priv *priv, struct ieee80211_sta *sta, u8 sta_i
 		lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
 	lq_sta->is_agg = 0;
 
+#ifdef CONFIG_MAC80211_DEBUGFS
+	lq_sta->dbg_fixed_rate = 0;
+#endif
+
 	rs_initialize_lq(priv, conf, sta, lq_sta);
 }
 
@@ -3010,10 +3019,7 @@ static void rs_fill_link_cmd(struct iwl_priv *priv,
 	 */
 	if (priv && priv->cfg->bt_params &&
 	    priv->cfg->bt_params->agg_time_limit &&
-	    priv->cfg->bt_params->agg_time_limit >=
-		LINK_QUAL_AGG_TIME_LIMIT_MIN &&
-	    priv->cfg->bt_params->agg_time_limit <=
-		 LINK_QUAL_AGG_TIME_LIMIT_MAX)
+	    priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
 		lq_cmd->agg_params.agg_time_limit =
 			cpu_to_le16(priv->cfg->bt_params->agg_time_limit);
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
new file mode 100644
index 00000000000..6d140bd5329
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rxon.c
@@ -0,0 +1,642 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include "iwl-dev.h"
+#include "iwl-agn.h"
+#include "iwl-sta.h"
+#include "iwl-core.h"
+#include "iwl-agn-calib.h"
+
+static int iwlagn_disable_bss(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx,
+			      struct iwl_rxon_cmd *send)
+{
+	__le32 old_filter = send->filter_flags;
+	int ret;
+
+	send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(*send), send);
+
+	send->filter_flags = old_filter;
+
+	if (ret)
+		IWL_ERR(priv, "Error clearing ASSOC_MSK on BSS (%d)\n", ret);
+
+	return ret;
+}
+
+static int iwlagn_disable_pan(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx,
+			      struct iwl_rxon_cmd *send)
+{
+	__le32 old_filter = send->filter_flags;
+	u8 old_dev_type = send->dev_type;
+	int ret;
+
+	send->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	send->dev_type = RXON_DEV_TYPE_P2P;
+	ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd, sizeof(*send), send);
+
+	send->filter_flags = old_filter;
+	send->dev_type = old_dev_type;
+
+	if (ret)
+		IWL_ERR(priv, "Error disabling PAN (%d)\n", ret);
+
+	/* FIXME: WAIT FOR PAN DISABLE */
+	msleep(300);
+
+	return ret;
+}
+
+static void iwlagn_update_qos(struct iwl_priv *priv,
+			      struct iwl_rxon_context *ctx)
+{
+	int ret;
+
+	if (!ctx->is_active)
+		return;
+
+	ctx->qos_data.def_qos_parm.qos_flags = 0;
+
+	if (ctx->qos_data.qos_active)
+		ctx->qos_data.def_qos_parm.qos_flags |=
+			QOS_PARAM_FLG_UPDATE_EDCA_MSK;
+
+	if (ctx->ht.enabled)
+		ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
+
+	IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
+		      ctx->qos_data.qos_active,
+		      ctx->qos_data.def_qos_parm.qos_flags);
+
+	ret = iwl_send_cmd_pdu(priv, ctx->qos_cmd,
+			       sizeof(struct iwl_qosparam_cmd),
+			       &ctx->qos_data.def_qos_parm);
+	if (ret)
+		IWL_ERR(priv, "Failed to update QoS\n");
+}
+
+static int iwlagn_update_beacon(struct iwl_priv *priv,
+				struct ieee80211_vif *vif)
+{
+	lockdep_assert_held(&priv->mutex);
+
+	dev_kfree_skb(priv->beacon_skb);
+	priv->beacon_skb = ieee80211_beacon_get(priv->hw, vif);
+	if (!priv->beacon_skb)
+		return -ENOMEM;
+	return iwlagn_send_beacon_cmd(priv);
+}
+
+/**
+ * iwlagn_commit_rxon - commit staging_rxon to hardware
+ *
+ * The RXON command in staging_rxon is committed to the hardware and
+ * the active_rxon structure is updated with the new data.  This
+ * function correctly transitions out of the RXON_ASSOC_MSK state if
+ * a HW tune is required based on the RXON structure changes.
+ */
+int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+	/* cast away the const for active_rxon in this function */
+	struct iwl_rxon_cmd *active = (void *)&ctx->active;
+	bool new_assoc = !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
+	bool old_assoc = !!(ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK);
+	int ret;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return -EINVAL;
+
+	if (!iwl_is_alive(priv))
+		return -EBUSY;
+
+	/* This function hardcodes a bunch of dual-mode assumptions */
+	BUILD_BUG_ON(NUM_IWL_RXON_CTX != 2);
+
+	if (!ctx->is_active)
+		return 0;
+
+	/* always get timestamp with Rx frame */
+	ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
+
+	if ((ctx->vif && ctx->vif->bss_conf.use_short_slot) ||
+	    !(ctx->staging.flags & RXON_FLG_BAND_24G_MSK))
+		ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+
+	ret = iwl_check_rxon_cmd(priv, ctx);
+	if (ret) {
+		IWL_ERR(priv, "Invalid RXON configuration. Not committing.\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * receive commit_rxon request
+	 * abort any previous channel switch if still in process
+	 */
+	if (priv->switch_rxon.switch_in_progress &&
+	    (priv->switch_rxon.channel != ctx->staging.channel)) {
+		IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
+		      le16_to_cpu(priv->switch_rxon.channel));
+		iwl_chswitch_done(priv, false);
+	}
+
+	/*
+	 * If we don't need to send a full RXON, we can use
+	 * iwl_rxon_assoc_cmd which is used to reconfigure filter
+	 * and other flags for the current radio configuration.
+	 */
+	if (!iwl_full_rxon_required(priv, ctx)) {
+		ret = iwl_send_rxon_assoc(priv, ctx);
+		if (ret) {
+			IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
+			return ret;
+		}
+
+		memcpy(active, &ctx->staging, sizeof(*active));
+		iwl_print_rx_config_cmd(priv, ctx);
+		return 0;
+	}
+
+	if (priv->cfg->ops->hcmd->set_pan_params) {
+		ret = priv->cfg->ops->hcmd->set_pan_params(priv);
+		if (ret)
+			return ret;
+	}
+
+	iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto);
+
+	IWL_DEBUG_INFO(priv,
+		       "Going to commit RXON\n"
+		       "  * with%s RXON_FILTER_ASSOC_MSK\n"
+		       "  * channel = %d\n"
+		       "  * bssid = %pM\n",
+		       (new_assoc ? "" : "out"),
+		       le16_to_cpu(ctx->staging.channel),
+		       ctx->staging.bssid_addr);
+
+	/*
+	 * Always clear associated first, but with the correct config.
+	 * This is required as for example station addition for the
+	 * AP station must be done after the BSSID is set to correctly
+	 * set up filters in the device.
+	 */
+	if ((old_assoc && new_assoc) || !new_assoc) {
+		if (ctx->ctxid == IWL_RXON_CTX_BSS)
+			ret = iwlagn_disable_bss(priv, ctx, &ctx->staging);
+		else
+			ret = iwlagn_disable_pan(priv, ctx, &ctx->staging);
+		if (ret)
+			return ret;
+
+		memcpy(active, &ctx->staging, sizeof(*active));
+
+		/*
+		 * Un-assoc RXON clears the station table and WEP
+		 * keys, so we have to restore those afterwards.
+		 */
+		iwl_clear_ucode_stations(priv, ctx);
+		iwl_restore_stations(priv, ctx);
+		ret = iwl_restore_default_wep_keys(priv, ctx);
+		if (ret) {
+			IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
+			return ret;
+		}
+	}
+
+	/* RXON timing must be before associated RXON */
+	ret = iwl_send_rxon_timing(priv, ctx);
+	if (ret) {
+		IWL_ERR(priv, "Failed to send timing (%d)!\n", ret);
+		return ret;
+	}
+
+	if (new_assoc) {
+		/* QoS info may be cleared by previous un-assoc RXON */
+		iwlagn_update_qos(priv, ctx);
+
+		/*
+		 * We'll run into this code path when beaconing is
+		 * enabled, but then we also need to send the beacon
+		 * to the device.
+		 */
+		if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_AP)) {
+			ret = iwlagn_update_beacon(priv, ctx->vif);
+			if (ret) {
+				IWL_ERR(priv,
+					"Error sending required beacon (%d)!\n",
+					ret);
+				return ret;
+			}
+		}
+
+		priv->start_calib = 0;
+		/*
+		 * Apply the new configuration.
+		 *
+		 * Associated RXON doesn't clear the station table in uCode,
+		 * so we don't need to restore stations etc. after this.
+		 */
+		ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
+			      sizeof(struct iwl_rxon_cmd), &ctx->staging);
+		if (ret) {
+			IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
+			return ret;
+		}
+		memcpy(active, &ctx->staging, sizeof(*active));
+
+		iwl_reprogram_ap_sta(priv, ctx);
+
+		/* IBSS beacon needs to be sent after setting assoc */
+		if (ctx->vif && (ctx->vif->type == NL80211_IFTYPE_ADHOC))
+			if (iwlagn_update_beacon(priv, ctx->vif))
+				IWL_ERR(priv, "Error sending IBSS beacon\n");
+	}
+
+	iwl_print_rx_config_cmd(priv, ctx);
+
+	iwl_init_sensitivity(priv);
+
+	/*
+	 * If we issue a new RXON command which required a tune then we must
+	 * send a new TXPOWER command or we won't be able to Tx any frames.
+	 *
+	 * FIXME: which RXON requires a tune? Can we optimise this out in
+	 *        some cases?
+	 */
+	ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
+	if (ret) {
+		IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_rxon_context *ctx;
+	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_channel *channel = conf->channel;
+	const struct iwl_channel_info *ch_info;
+	int ret = 0;
+	bool ht_changed[NUM_IWL_RXON_CTX] = {};
+
+	IWL_DEBUG_MAC80211(priv, "changed %#x", changed);
+
+	mutex_lock(&priv->mutex);
+
+	if (unlikely(test_bit(STATUS_SCANNING, &priv->status))) {
+		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
+		goto out;
+	}
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		goto out;
+	}
+
+	if (changed & (IEEE80211_CONF_CHANGE_SMPS |
+		       IEEE80211_CONF_CHANGE_CHANNEL)) {
+		/* mac80211 uses static for non-HT which is what we want */
+		priv->current_ht_config.smps = conf->smps_mode;
+
+		/*
+		 * Recalculate chain counts.
+		 *
+		 * If monitor mode is enabled then mac80211 will
+		 * set up the SM PS mode to OFF if an HT channel is
+		 * configured.
+		 */
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			for_each_context(priv, ctx)
+				priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		unsigned long flags;
+
+		ch_info = iwl_get_channel_info(priv, channel->band,
+					       channel->hw_value);
+		if (!is_channel_valid(ch_info)) {
+			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
+			ret = -EINVAL;
+			goto out;
+		}
+
+		spin_lock_irqsave(&priv->lock, flags);
+
+		for_each_context(priv, ctx) {
+			/* Configure HT40 channels */
+			if (ctx->ht.enabled != conf_is_ht(conf)) {
+				ctx->ht.enabled = conf_is_ht(conf);
+				ht_changed[ctx->ctxid] = true;
+			}
+
+			if (ctx->ht.enabled) {
+				if (conf_is_ht40_minus(conf)) {
+					ctx->ht.extension_chan_offset =
+						IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+					ctx->ht.is_40mhz = true;
+				} else if (conf_is_ht40_plus(conf)) {
+					ctx->ht.extension_chan_offset =
+						IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+					ctx->ht.is_40mhz = true;
+				} else {
+					ctx->ht.extension_chan_offset =
+						IEEE80211_HT_PARAM_CHA_SEC_NONE;
+					ctx->ht.is_40mhz = false;
+				}
+			} else
+				ctx->ht.is_40mhz = false;
+
+			/*
+			 * Default to no protection. Protection mode will
+			 * later be set from BSS config in iwl_ht_conf
+			 */
+			ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
+
+			/* if we are switching from ht to 2.4 clear flags
+			 * from any ht related info since 2.4 does not
+			 * support ht */
+			if (le16_to_cpu(ctx->staging.channel) !=
+			    channel->hw_value)
+				ctx->staging.flags = 0;
+
+			iwl_set_rxon_channel(priv, channel, ctx);
+			iwl_set_rxon_ht(priv, &priv->current_ht_config);
+
+			iwl_set_flags_for_band(priv, ctx, channel->band,
+					       ctx->vif);
+		}
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		iwl_update_bcast_stations(priv);
+
+		/*
+		 * The list of supported rates and rate mask can be different
+		 * for each band; since the band may have changed, reset
+		 * the rate mask to what mac80211 lists.
+		 */
+		iwl_set_rate(priv);
+	}
+
+	if (changed & (IEEE80211_CONF_CHANGE_PS |
+			IEEE80211_CONF_CHANGE_IDLE)) {
+		ret = iwl_power_update_mode(priv, false);
+		if (ret)
+			IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
+			priv->tx_power_user_lmt, conf->power_level);
+
+		iwl_set_tx_power(priv, conf->power_level, false);
+	}
+
+	for_each_context(priv, ctx) {
+		if (!memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+			continue;
+		iwlagn_commit_rxon(priv, ctx);
+		if (ht_changed[ctx->ctxid])
+			iwlagn_update_qos(priv, ctx);
+	}
+ out:
+	mutex_unlock(&priv->mutex);
+	return ret;
+}
+
+static void iwlagn_check_needed_chains(struct iwl_priv *priv,
+				       struct iwl_rxon_context *ctx,
+				       struct ieee80211_bss_conf *bss_conf)
+{
+	struct ieee80211_vif *vif = ctx->vif;
+	struct iwl_rxon_context *tmp;
+	struct ieee80211_sta *sta;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
+	bool need_multiple;
+
+	lockdep_assert_held(&priv->mutex);
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		rcu_read_lock();
+		sta = ieee80211_find_sta(vif, bss_conf->bssid);
+		if (sta) {
+			struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+			int maxstreams;
+
+			maxstreams = (ht_cap->mcs.tx_params &
+				      IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
+					>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+			maxstreams += 1;
+
+			need_multiple = true;
+
+			if ((ht_cap->mcs.rx_mask[1] == 0) &&
+			    (ht_cap->mcs.rx_mask[2] == 0))
+				need_multiple = false;
+			if (maxstreams <= 1)
+				need_multiple = false;
+		} else {
+			/*
+			 * If at all, this can only happen through a race
+			 * when the AP disconnects us while we're still
+			 * setting up the connection, in that case mac80211
+			 * will soon tell us about that.
+			 */
+			need_multiple = false;
+		}
+		rcu_read_unlock();
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		/* currently */
+		need_multiple = false;
+		break;
+	default:
+		/* only AP really */
+		need_multiple = true;
+		break;
+	}
+
+	ctx->ht_need_multiple_chains = need_multiple;
+
+	if (!need_multiple) {
+		/* check all contexts */
+		for_each_context(priv, tmp) {
+			if (!tmp->vif)
+				continue;
+			if (tmp->ht_need_multiple_chains) {
+				need_multiple = true;
+				break;
+			}
+		}
+	}
+
+	ht_conf->single_chain_sufficient = !need_multiple;
+}
+
+void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_bss_conf *bss_conf,
+			     u32 changes)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+	int ret;
+	bool force = false;
+
+	mutex_lock(&priv->mutex);
+
+	if (unlikely(!iwl_is_ready(priv))) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		mutex_unlock(&priv->mutex);
+		return;
+        }
+
+	if (unlikely(!ctx->vif)) {
+		IWL_DEBUG_MAC80211(priv, "leave - vif is NULL\n");
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	if (changes & BSS_CHANGED_BEACON_INT)
+		force = true;
+
+	if (changes & BSS_CHANGED_QOS) {
+		ctx->qos_data.qos_active = bss_conf->qos;
+		iwlagn_update_qos(priv, ctx);
+	}
+
+	ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
+	if (vif->bss_conf.use_short_preamble)
+		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+	if (changes & BSS_CHANGED_ASSOC) {
+		if (bss_conf->assoc) {
+			iwl_led_associate(priv);
+			priv->timestamp = bss_conf->timestamp;
+			ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+		} else {
+			ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+			iwl_led_disassociate(priv);
+		}
+	}
+
+	if (ctx->ht.enabled) {
+		ctx->ht.protection = bss_conf->ht_operation_mode &
+					IEEE80211_HT_OP_MODE_PROTECTION;
+		ctx->ht.non_gf_sta_present = !!(bss_conf->ht_operation_mode &
+					IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+		iwlagn_check_needed_chains(priv, ctx, bss_conf);
+		iwl_set_rxon_ht(priv, &priv->current_ht_config);
+	}
+
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
+
+	if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
+		ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
+	else
+		ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+
+	if (bss_conf->use_cts_prot)
+		ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+	else
+		ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
+
+	memcpy(ctx->staging.bssid_addr, bss_conf->bssid, ETH_ALEN);
+
+	if (vif->type == NL80211_IFTYPE_AP ||
+	    vif->type == NL80211_IFTYPE_ADHOC) {
+		if (vif->bss_conf.enable_beacon) {
+			ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+			priv->beacon_ctx = ctx;
+		} else {
+			ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+			priv->beacon_ctx = NULL;
+		}
+	}
+
+	if (force || memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+		iwlagn_commit_rxon(priv, ctx);
+
+	if (changes & BSS_CHANGED_ASSOC && bss_conf->assoc) {
+		/*
+		 * The chain noise calibration will enable PM upon
+		 * completion. If calibration has already been run
+		 * then we need to enable power management here.
+		 */
+		if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
+			iwl_power_update_mode(priv, false);
+
+		/* Enable RX differential gain and sensitivity calibrations */
+		iwl_chain_noise_reset(priv);
+		priv->start_calib = 1;
+	}
+
+	if (changes & BSS_CHANGED_IBSS) {
+		ret = iwlagn_manage_ibss_station(priv, vif,
+						 bss_conf->ibss_joined);
+		if (ret)
+			IWL_ERR(priv, "failed to %s IBSS station %pM\n",
+				bss_conf->ibss_joined ? "add" : "remove",
+				bss_conf->bssid);
+	}
+
+	if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_ADHOC &&
+	    priv->beacon_ctx) {
+		if (iwlagn_update_beacon(priv, vif))
+			IWL_ERR(priv, "Error sending IBSS beacon\n");
+	}
+
+	mutex_unlock(&priv->mutex);
+}
+
+void iwlagn_post_scan(struct iwl_priv *priv)
+{
+	struct iwl_rxon_context *ctx;
+
+	/*
+	 * Since setting the RXON may have been deferred while
+	 * performing the scan, fire one off if needed
+	 */
+	for_each_context(priv, ctx)
+		if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+			iwlagn_commit_rxon(priv, ctx);
+
+	if (priv->cfg->ops->hcmd->set_pan_params)
+		priv->cfg->ops->hcmd->set_pan_params(priv);
+}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
index 35a30d2e073..35f085ac336 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-sta.c
@@ -684,7 +684,7 @@ int iwl_sta_rx_agg_stop(struct iwl_priv *priv, struct ieee80211_sta *sta,
 	return iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
 }
 
-void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id)
+static void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id)
 {
 	unsigned long flags;
 
@@ -714,3 +714,33 @@ void iwl_sta_modify_sleep_tx_count(struct iwl_priv *priv, int sta_id, int cnt)
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
 }
+
+void iwlagn_mac_sta_notify(struct ieee80211_hw *hw,
+			   struct ieee80211_vif *vif,
+			   enum sta_notify_cmd cmd,
+			   struct ieee80211_sta *sta)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
+	int sta_id;
+
+	switch (cmd) {
+	case STA_NOTIFY_SLEEP:
+		WARN_ON(!sta_priv->client);
+		sta_priv->asleep = true;
+		if (atomic_read(&sta_priv->pending_frames) > 0)
+			ieee80211_sta_block_awake(hw, sta, true);
+		break;
+	case STA_NOTIFY_AWAKE:
+		WARN_ON(!sta_priv->client);
+		if (!sta_priv->asleep)
+			break;
+		sta_priv->asleep = false;
+		sta_id = iwl_sta_id(sta);
+		if (sta_id != IWL_INVALID_STATION)
+			iwl_sta_modify_ps_wake(priv, sta_id);
+		break;
+	default:
+		break;
+	}
+}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
index 2b078a99572..24a11b8f73b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c
@@ -67,8 +67,14 @@
  */
 
 static const u8 tid_to_ac[] = {
-	/* this matches the mac80211 numbers */
-	2, 3, 3, 2, 1, 1, 0, 0
+	IEEE80211_AC_BE,
+	IEEE80211_AC_BK,
+	IEEE80211_AC_BK,
+	IEEE80211_AC_BE,
+	IEEE80211_AC_VI,
+	IEEE80211_AC_VI,
+	IEEE80211_AC_VO,
+	IEEE80211_AC_VO
 };
 
 static inline int get_ac_from_tid(u16 tid)
@@ -518,11 +524,11 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	struct iwl_cmd_meta *out_meta;
 	struct iwl_tx_cmd *tx_cmd;
 	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
-	int swq_id, txq_id;
+	int txq_id;
 	dma_addr_t phys_addr;
 	dma_addr_t txcmd_phys;
 	dma_addr_t scratch_phys;
-	u16 len, len_org, firstlen, secondlen;
+	u16 len, firstlen, secondlen;
 	u16 seq_number = 0;
 	__le16 fc;
 	u8 hdr_len;
@@ -531,6 +537,7 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	u8 tid = 0;
 	u8 *qc = NULL;
 	unsigned long flags;
+	bool is_agg = false;
 
 	if (info->control.vif)
 		ctx = iwl_rxon_ctx_from_vif(info->control.vif);
@@ -567,8 +574,8 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (sta)
 		sta_priv = (void *)sta->drv_priv;
 
-	if (sta_priv && sta_priv->asleep) {
-		WARN_ON(!(info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE));
+	if (sta_priv && sta_priv->asleep &&
+	    (info->flags & IEEE80211_TX_CTL_PSPOLL_RESPONSE)) {
 		/*
 		 * This sends an asynchronous command to the device,
 		 * but we can rely on it being processed before the
@@ -616,11 +623,11 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 		if (info->flags & IEEE80211_TX_CTL_AMPDU &&
 		    priv->stations[sta_id].tid[tid].agg.state == IWL_AGG_ON) {
 			txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
+			is_agg = true;
 		}
 	}
 
 	txq = &priv->txq[txq_id];
-	swq_id = txq->swq_id;
 	q = &txq->q;
 
 	if (unlikely(iwl_queue_space(q) < q->high_mark)) {
@@ -687,30 +694,23 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	 */
 	len = sizeof(struct iwl_tx_cmd) +
 		sizeof(struct iwl_cmd_header) + hdr_len;
-
-	len_org = len;
-	firstlen = len = (len + 3) & ~3;
-
-	if (len_org != len)
-		len_org = 1;
-	else
-		len_org = 0;
+	firstlen = (len + 3) & ~3;
 
 	/* Tell NIC about any 2-byte padding after MAC header */
-	if (len_org)
+	if (firstlen != len)
 		tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;
 
 	/* Physical address of this Tx command's header (not MAC header!),
 	 * within command buffer array. */
 	txcmd_phys = pci_map_single(priv->pci_dev,
-				    &out_cmd->hdr, len,
+				    &out_cmd->hdr, firstlen,
 				    PCI_DMA_BIDIRECTIONAL);
 	dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
-	dma_unmap_len_set(out_meta, len, len);
+	dma_unmap_len_set(out_meta, len, firstlen);
 	/* Add buffer containing Tx command and MAC(!) header to TFD's
 	 * first entry */
 	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
-						   txcmd_phys, len, 1, 0);
+						   txcmd_phys, firstlen, 1, 0);
 
 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
 		txq->need_update = 1;
@@ -721,23 +721,21 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
 	 * if any (802.11 null frames have no payload). */
-	secondlen = len = skb->len - hdr_len;
-	if (len) {
+	secondlen = skb->len - hdr_len;
+	if (secondlen > 0) {
 		phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
-					   len, PCI_DMA_TODEVICE);
+					   secondlen, PCI_DMA_TODEVICE);
 		priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
-							   phys_addr, len,
+							   phys_addr, secondlen,
 							   0, 0);
 	}
 
 	scratch_phys = txcmd_phys + sizeof(struct iwl_cmd_header) +
 				offsetof(struct iwl_tx_cmd, scratch);
 
-	len = sizeof(struct iwl_tx_cmd) +
-		sizeof(struct iwl_cmd_header) + hdr_len;
 	/* take back ownership of DMA buffer to enable update */
 	pci_dma_sync_single_for_cpu(priv->pci_dev, txcmd_phys,
-				    len, PCI_DMA_BIDIRECTIONAL);
+				    firstlen, PCI_DMA_BIDIRECTIONAL);
 	tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
 	tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys);
 
@@ -753,7 +751,7 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 						     le16_to_cpu(tx_cmd->len));
 
 	pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
-				       len, PCI_DMA_BIDIRECTIONAL);
+				       firstlen, PCI_DMA_BIDIRECTIONAL);
 
 	trace_iwlwifi_dev_tx(priv,
 			     &((struct iwl_tfd *)txq->tfds)[txq->q.write_ptr],
@@ -773,8 +771,14 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	 * whether or not we should update the write pointer.
 	 */
 
-	/* avoid atomic ops if it isn't an associated client */
-	if (sta_priv && sta_priv->client)
+	/*
+	 * Avoid atomic ops if it isn't an associated client.
+	 * Also, if this is a packet for aggregation, don't
+	 * increase the counter because the ucode will stop
+	 * aggregation queues when their respective station
+	 * goes to sleep.
+	 */
+	if (sta_priv && sta_priv->client && !is_agg)
 		atomic_inc(&sta_priv->pending_frames);
 
 	if ((iwl_queue_space(q) < q->high_mark) && priv->mac80211_registered) {
@@ -784,7 +788,7 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 			iwl_txq_update_write_ptr(priv, txq);
 			spin_unlock_irqrestore(&priv->lock, flags);
 		} else {
-			iwl_stop_queue(priv, txq->swq_id);
+			iwl_stop_queue(priv, txq);
 		}
 	}
 
@@ -1013,7 +1017,7 @@ int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif,
 	tid_data = &priv->stations[sta_id].tid[tid];
 	*ssn = SEQ_TO_SN(tid_data->seq_number);
 	tid_data->agg.txq_id = txq_id;
-	priv->txq[txq_id].swq_id = iwl_virtual_agg_queue_num(get_ac_from_tid(tid), txq_id);
+	iwl_set_swq_id(&priv->txq[txq_id], get_ac_from_tid(tid), txq_id);
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
 	ret = priv->cfg->ops->lib->txq_agg_enable(priv, txq_id, tx_fifo,
@@ -1153,14 +1157,15 @@ int iwlagn_txq_check_empty(struct iwl_priv *priv,
 	return 0;
 }
 
-static void iwlagn_tx_status(struct iwl_priv *priv, struct iwl_tx_info *tx_info)
+static void iwlagn_non_agg_tx_status(struct iwl_priv *priv,
+				     struct iwl_rxon_context *ctx,
+				     const u8 *addr1)
 {
-	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) tx_info->skb->data;
 	struct ieee80211_sta *sta;
 	struct iwl_station_priv *sta_priv;
 
 	rcu_read_lock();
-	sta = ieee80211_find_sta(tx_info->ctx->vif, hdr->addr1);
+	sta = ieee80211_find_sta(ctx->vif, addr1);
 	if (sta) {
 		sta_priv = (void *)sta->drv_priv;
 		/* avoid atomic ops if this isn't a client */
@@ -1169,6 +1174,15 @@ static void iwlagn_tx_status(struct iwl_priv *priv, struct iwl_tx_info *tx_info)
 			ieee80211_sta_block_awake(priv->hw, sta, false);
 	}
 	rcu_read_unlock();
+}
+
+static void iwlagn_tx_status(struct iwl_priv *priv, struct iwl_tx_info *tx_info,
+			     bool is_agg)
+{
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) tx_info->skb->data;
+
+	if (!is_agg)
+		iwlagn_non_agg_tx_status(priv, tx_info->ctx, hdr->addr1);
 
 	ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb);
 }
@@ -1193,7 +1207,8 @@ int iwlagn_tx_queue_reclaim(struct iwl_priv *priv, int txq_id, int index)
 	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
 
 		tx_info = &txq->txb[txq->q.read_ptr];
-		iwlagn_tx_status(priv, tx_info);
+		iwlagn_tx_status(priv, tx_info,
+				 txq_id >= IWLAGN_FIRST_AMPDU_QUEUE);
 
 		hdr = (struct ieee80211_hdr *)tx_info->skb->data;
 		if (hdr && ieee80211_is_data_qos(hdr->frame_control))
@@ -1222,7 +1237,6 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
 	int i, sh, ack;
 	u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
 	u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
-	u64 bitmap, sent_bitmap;
 	int successes = 0;
 	struct ieee80211_tx_info *info;
 
@@ -1241,40 +1255,68 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv,
 	if (sh < 0) /* tbw something is wrong with indices */
 		sh += 0x100;
 
-	/* don't use 64-bit values for now */
-	bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
-
 	if (agg->frame_count > (64 - sh)) {
 		IWL_DEBUG_TX_REPLY(priv, "more frames than bitmap size");
 		return -1;
 	}
+	if (!priv->cfg->base_params->no_agg_framecnt_info && ba_resp->txed) {
+		/*
+		 * sent and ack information provided by uCode
+		 * use it instead of figure out ourself
+		 */
+		if (ba_resp->txed_2_done > ba_resp->txed) {
+			IWL_DEBUG_TX_REPLY(priv,
+				"bogus sent(%d) and ack(%d) count\n",
+				ba_resp->txed, ba_resp->txed_2_done);
+			/*
+			 * set txed_2_done = txed,
+			 * so it won't impact rate scale
+			 */
+			ba_resp->txed = ba_resp->txed_2_done;
+		}
+		IWL_DEBUG_HT(priv, "agg frames sent:%d, acked:%d\n",
+				ba_resp->txed, ba_resp->txed_2_done);
+	} else {
+		u64 bitmap, sent_bitmap;
+
+		/* don't use 64-bit values for now */
+		bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;
+
+		/* check for success or failure according to the
+		 * transmitted bitmap and block-ack bitmap */
+		sent_bitmap = bitmap & agg->bitmap;
+
+		/* For each frame attempted in aggregation,
+		 * update driver's record of tx frame's status. */
+		i = 0;
+		while (sent_bitmap) {
+			ack = sent_bitmap & 1ULL;
+			successes += ack;
+			IWL_DEBUG_TX_REPLY(priv, "%s ON i=%d idx=%d raw=%d\n",
+				ack ? "ACK" : "NACK", i,
+				(agg->start_idx + i) & 0xff,
+				agg->start_idx + i);
+			sent_bitmap >>= 1;
+			++i;
+		}
 
-	/* check for success or failure according to the
-	 * transmitted bitmap and block-ack bitmap */
-	sent_bitmap = bitmap & agg->bitmap;
-
-	/* For each frame attempted in aggregation,
-	 * update driver's record of tx frame's status. */
-	i = 0;
-	while (sent_bitmap) {
-		ack = sent_bitmap & 1ULL;
-		successes += ack;
-		IWL_DEBUG_TX_REPLY(priv, "%s ON i=%d idx=%d raw=%d\n",
-			ack ? "ACK" : "NACK", i, (agg->start_idx + i) & 0xff,
-			agg->start_idx + i);
-		sent_bitmap >>= 1;
-		++i;
+		IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n",
+				   (unsigned long long)bitmap);
 	}
 
 	info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb);
 	memset(&info->status, 0, sizeof(info->status));
 	info->flags |= IEEE80211_TX_STAT_ACK;
 	info->flags |= IEEE80211_TX_STAT_AMPDU;
-	info->status.ampdu_ack_len = successes;
-	info->status.ampdu_len = agg->frame_count;
-	iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags, info);
+	if (!priv->cfg->base_params->no_agg_framecnt_info && ba_resp->txed) {
+		info->status.ampdu_ack_len = ba_resp->txed_2_done;
+		info->status.ampdu_len = ba_resp->txed;
 
-	IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n", (unsigned long long)bitmap);
+	} else {
+		info->status.ampdu_ack_len = successes;
+		info->status.ampdu_len = agg->frame_count;
+	}
+	iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags, info);
 
 	return 0;
 }
@@ -1385,7 +1427,7 @@ void iwlagn_rx_reply_compressed_ba(struct iwl_priv *priv,
 		if ((iwl_queue_space(&txq->q) > txq->q.low_mark) &&
 		    priv->mac80211_registered &&
 		    (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA))
-			iwl_wake_queue(priv, txq->swq_id);
+			iwl_wake_queue(priv, txq);
 
 		iwlagn_txq_check_empty(priv, sta_id, tid, scd_flow);
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
index 703621107da..24dabcd2a36 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
@@ -40,30 +40,36 @@
 #include "iwl-agn.h"
 #include "iwl-agn-calib.h"
 
-static const s8 iwlagn_default_queue_to_tx_fifo[] = {
-	IWL_TX_FIFO_VO,
-	IWL_TX_FIFO_VI,
-	IWL_TX_FIFO_BE,
-	IWL_TX_FIFO_BK,
-	IWLAGN_CMD_FIFO_NUM,
-	IWL_TX_FIFO_UNUSED,
-	IWL_TX_FIFO_UNUSED,
-	IWL_TX_FIFO_UNUSED,
-	IWL_TX_FIFO_UNUSED,
-	IWL_TX_FIFO_UNUSED,
+#define IWL_AC_UNSET -1
+
+struct queue_to_fifo_ac {
+	s8 fifo, ac;
+};
+
+static const struct queue_to_fifo_ac iwlagn_default_queue_to_tx_fifo[] = {
+	{ IWL_TX_FIFO_VO, IEEE80211_AC_VO, },
+	{ IWL_TX_FIFO_VI, IEEE80211_AC_VI, },
+	{ IWL_TX_FIFO_BE, IEEE80211_AC_BE, },
+	{ IWL_TX_FIFO_BK, IEEE80211_AC_BK, },
+	{ IWLAGN_CMD_FIFO_NUM, IWL_AC_UNSET, },
+	{ IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, },
+	{ IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, },
+	{ IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, },
+	{ IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, },
+	{ IWL_TX_FIFO_UNUSED, IWL_AC_UNSET, },
 };
 
-static const s8 iwlagn_ipan_queue_to_tx_fifo[] = {
-	IWL_TX_FIFO_VO,
-	IWL_TX_FIFO_VI,
-	IWL_TX_FIFO_BE,
-	IWL_TX_FIFO_BK,
-	IWL_TX_FIFO_BK_IPAN,
-	IWL_TX_FIFO_BE_IPAN,
-	IWL_TX_FIFO_VI_IPAN,
-	IWL_TX_FIFO_VO_IPAN,
-	IWL_TX_FIFO_BE_IPAN,
-	IWLAGN_CMD_FIFO_NUM,
+static const struct queue_to_fifo_ac iwlagn_ipan_queue_to_tx_fifo[] = {
+	{ IWL_TX_FIFO_VO, IEEE80211_AC_VO, },
+	{ IWL_TX_FIFO_VI, IEEE80211_AC_VI, },
+	{ IWL_TX_FIFO_BE, IEEE80211_AC_BE, },
+	{ IWL_TX_FIFO_BK, IEEE80211_AC_BK, },
+	{ IWL_TX_FIFO_BK_IPAN, IEEE80211_AC_BK, },
+	{ IWL_TX_FIFO_BE_IPAN, IEEE80211_AC_BE, },
+	{ IWL_TX_FIFO_VI_IPAN, IEEE80211_AC_VI, },
+	{ IWL_TX_FIFO_VO_IPAN, IEEE80211_AC_VO, },
+	{ IWL_TX_FIFO_BE_IPAN, 2, },
+	{ IWLAGN_CMD_FIFO_NUM, IWL_AC_UNSET, },
 };
 
 static struct iwl_wimax_coex_event_entry cu_priorities[COEX_NUM_OF_EVENTS] = {
@@ -429,7 +435,7 @@ void iwlagn_send_bt_env(struct iwl_priv *priv, u8 action, u8 type)
 
 int iwlagn_alive_notify(struct iwl_priv *priv)
 {
-	const s8 *queues;
+	const struct queue_to_fifo_ac *queue_to_fifo;
 	u32 a;
 	unsigned long flags;
 	int i, chan;
@@ -492,9 +498,9 @@ int iwlagn_alive_notify(struct iwl_priv *priv)
 
 	/* map queues to FIFOs */
 	if (priv->valid_contexts != BIT(IWL_RXON_CTX_BSS))
-		queues = iwlagn_ipan_queue_to_tx_fifo;
+		queue_to_fifo = iwlagn_ipan_queue_to_tx_fifo;
 	else
-		queues = iwlagn_default_queue_to_tx_fifo;
+		queue_to_fifo = iwlagn_default_queue_to_tx_fifo;
 
 	iwlagn_set_wr_ptrs(priv, priv->cmd_queue, 0);
 
@@ -510,18 +516,25 @@ int iwlagn_alive_notify(struct iwl_priv *priv)
 	BUILD_BUG_ON(ARRAY_SIZE(iwlagn_ipan_queue_to_tx_fifo) != 10);
 
 	for (i = 0; i < 10; i++) {
-		int ac = queues[i];
+		int fifo = queue_to_fifo[i].fifo;
+		int ac = queue_to_fifo[i].ac;
 
 		iwl_txq_ctx_activate(priv, i);
 
-		if (ac == IWL_TX_FIFO_UNUSED)
+		if (fifo == IWL_TX_FIFO_UNUSED)
 			continue;
 
-		iwlagn_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
+		if (ac != IWL_AC_UNSET)
+			iwl_set_swq_id(&priv->txq[i], ac, i);
+		iwlagn_tx_queue_set_status(priv, &priv->txq[i], fifo, 0);
 	}
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 
+	/* Enable L1-Active */
+	iwl_clear_bits_prph(priv, APMG_PCIDEV_STT_REG,
+			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+
 	iwlagn_send_wimax_coex(priv);
 
 	iwlagn_set_Xtal_calib(priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index c2636a7ab9e..f13a83a7e62 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -90,170 +90,6 @@ MODULE_ALIAS("iwl4965");
 static int iwlagn_ant_coupling;
 static bool iwlagn_bt_ch_announce = 1;
 
-/**
- * iwlagn_commit_rxon - commit staging_rxon to hardware
- *
- * The RXON command in staging_rxon is committed to the hardware and
- * the active_rxon structure is updated with the new data.  This
- * function correctly transitions out of the RXON_ASSOC_MSK state if
- * a HW tune is required based on the RXON structure changes.
- */
-int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
-	/* cast away the const for active_rxon in this function */
-	struct iwl_rxon_cmd *active_rxon = (void *)&ctx->active;
-	int ret;
-	bool new_assoc =
-		!!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
-	bool old_assoc = !!(ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK);
-
-	if (!iwl_is_alive(priv))
-		return -EBUSY;
-
-	if (!ctx->is_active)
-		return 0;
-
-	/* always get timestamp with Rx frame */
-	ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
-
-	ret = iwl_check_rxon_cmd(priv, ctx);
-	if (ret) {
-		IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * receive commit_rxon request
-	 * abort any previous channel switch if still in process
-	 */
-	if (priv->switch_rxon.switch_in_progress &&
-	    (priv->switch_rxon.channel != ctx->staging.channel)) {
-		IWL_DEBUG_11H(priv, "abort channel switch on %d\n",
-		      le16_to_cpu(priv->switch_rxon.channel));
-		iwl_chswitch_done(priv, false);
-	}
-
-	/* If we don't need to send a full RXON, we can use
-	 * iwl_rxon_assoc_cmd which is used to reconfigure filter
-	 * and other flags for the current radio configuration. */
-	if (!iwl_full_rxon_required(priv, ctx)) {
-		ret = iwl_send_rxon_assoc(priv, ctx);
-		if (ret) {
-			IWL_ERR(priv, "Error setting RXON_ASSOC (%d)\n", ret);
-			return ret;
-		}
-
-		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
-		iwl_print_rx_config_cmd(priv, ctx);
-		return 0;
-	}
-
-	/* If we are currently associated and the new config requires
-	 * an RXON_ASSOC and the new config wants the associated mask enabled,
-	 * we must clear the associated from the active configuration
-	 * before we apply the new config */
-	if (iwl_is_associated_ctx(ctx) && new_assoc) {
-		IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
-		active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
-		ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
-				       sizeof(struct iwl_rxon_cmd),
-				       active_rxon);
-
-		/* If the mask clearing failed then we set
-		 * active_rxon back to what it was previously */
-		if (ret) {
-			active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
-			IWL_ERR(priv, "Error clearing ASSOC_MSK (%d)\n", ret);
-			return ret;
-		}
-		iwl_clear_ucode_stations(priv, ctx);
-		iwl_restore_stations(priv, ctx);
-		ret = iwl_restore_default_wep_keys(priv, ctx);
-		if (ret) {
-			IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
-			return ret;
-		}
-	}
-
-	IWL_DEBUG_INFO(priv, "Sending RXON\n"
-		       "* with%s RXON_FILTER_ASSOC_MSK\n"
-		       "* channel = %d\n"
-		       "* bssid = %pM\n",
-		       (new_assoc ? "" : "out"),
-		       le16_to_cpu(ctx->staging.channel),
-		       ctx->staging.bssid_addr);
-
-	iwl_set_rxon_hwcrypto(priv, ctx, !priv->cfg->mod_params->sw_crypto);
-
-	if (!old_assoc) {
-		/*
-		 * First of all, before setting associated, we need to
-		 * send RXON timing so the device knows about the DTIM
-		 * period and other timing values
-		 */
-		ret = iwl_send_rxon_timing(priv, ctx);
-		if (ret) {
-			IWL_ERR(priv, "Error setting RXON timing!\n");
-			return ret;
-		}
-	}
-
-	if (priv->cfg->ops->hcmd->set_pan_params) {
-		ret = priv->cfg->ops->hcmd->set_pan_params(priv);
-		if (ret)
-			return ret;
-	}
-
-	/* Apply the new configuration
-	 * RXON unassoc clears the station table in uCode so restoration of
-	 * stations is needed after it (the RXON command) completes
-	 */
-	if (!new_assoc) {
-		ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
-			      sizeof(struct iwl_rxon_cmd), &ctx->staging);
-		if (ret) {
-			IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
-			return ret;
-		}
-		IWL_DEBUG_INFO(priv, "Return from !new_assoc RXON.\n");
-		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
-		iwl_clear_ucode_stations(priv, ctx);
-		iwl_restore_stations(priv, ctx);
-		ret = iwl_restore_default_wep_keys(priv, ctx);
-		if (ret) {
-			IWL_ERR(priv, "Failed to restore WEP keys (%d)\n", ret);
-			return ret;
-		}
-	}
-	if (new_assoc) {
-		priv->start_calib = 0;
-		/* Apply the new configuration
-		 * RXON assoc doesn't clear the station table in uCode,
-		 */
-		ret = iwl_send_cmd_pdu(priv, ctx->rxon_cmd,
-			      sizeof(struct iwl_rxon_cmd), &ctx->staging);
-		if (ret) {
-			IWL_ERR(priv, "Error setting new RXON (%d)\n", ret);
-			return ret;
-		}
-		memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
-	}
-	iwl_print_rx_config_cmd(priv, ctx);
-
-	iwl_init_sensitivity(priv);
-
-	/* If we issue a new RXON command which required a tune then we must
-	 * send a new TXPOWER command or we won't be able to Tx any frames */
-	ret = iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
-	if (ret) {
-		IWL_ERR(priv, "Error sending TX power (%d)\n", ret);
-		return ret;
-	}
-
-	return 0;
-}
-
 void iwl_update_chain_flags(struct iwl_priv *priv)
 {
 	struct iwl_rxon_context *ctx;
@@ -261,7 +97,8 @@ void iwl_update_chain_flags(struct iwl_priv *priv)
 	if (priv->cfg->ops->hcmd->set_rxon_chain) {
 		for_each_context(priv, ctx) {
 			priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-			iwlcore_commit_rxon(priv, ctx);
+			if (ctx->active.rx_chain != ctx->staging.rx_chain)
+				iwlcore_commit_rxon(priv, ctx);
 		}
 	}
 }
@@ -411,7 +248,8 @@ static unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv,
 
 	return sizeof(*tx_beacon_cmd) + frame_size;
 }
-static int iwl_send_beacon_cmd(struct iwl_priv *priv)
+
+int iwlagn_send_beacon_cmd(struct iwl_priv *priv)
 {
 	struct iwl_frame *frame;
 	unsigned int frame_size;
@@ -661,7 +499,7 @@ static void iwl_bg_beacon_update(struct work_struct *work)
 
 	priv->beacon_skb = beacon;
 
-	iwl_send_beacon_cmd(priv);
+	iwlagn_send_beacon_cmd(priv);
  out:
 	mutex_unlock(&priv->mutex);
 }
@@ -2664,7 +2502,7 @@ int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log,
 		return pos;
 	}
 
-	/* enable/disable bt channel announcement */
+	/* enable/disable bt channel inhibition */
 	priv->bt_ch_announce = iwlagn_bt_ch_announce;
 
 #ifdef CONFIG_IWLWIFI_DEBUG
@@ -2816,13 +2654,8 @@ static void iwl_alive_start(struct iwl_priv *priv)
 	/* After the ALIVE response, we can send host commands to the uCode */
 	set_bit(STATUS_ALIVE, &priv->status);
 
-	if (priv->cfg->ops->lib->recover_from_tx_stall) {
-		/* Enable timer to monitor the driver queues */
-		mod_timer(&priv->monitor_recover,
-			jiffies +
-			msecs_to_jiffies(
-			  priv->cfg->base_params->monitor_recover_period));
-	}
+	/* Enable watchdog to monitor the driver tx queues */
+	iwl_setup_watchdog(priv);
 
 	if (iwl_is_rfkill(priv))
 		return;
@@ -2879,6 +2712,8 @@ static void iwl_alive_start(struct iwl_priv *priv)
 
 	iwl_reset_run_time_calib(priv);
 
+	set_bit(STATUS_READY, &priv->status);
+
 	/* Configure the adapter for unassociated operation */
 	iwlcore_commit_rxon(priv, ctx);
 
@@ -2888,7 +2723,6 @@ static void iwl_alive_start(struct iwl_priv *priv)
 	iwl_leds_init(priv);
 
 	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
-	set_bit(STATUS_READY, &priv->status);
 	wake_up_interruptible(&priv->wait_command_queue);
 
 	iwl_power_update_mode(priv, true);
@@ -2916,8 +2750,7 @@ static void __iwl_down(struct iwl_priv *priv)
 
 	/* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
 	 * to prevent rearm timer */
-	if (priv->cfg->ops->lib->recover_from_tx_stall)
-		del_timer_sync(&priv->monitor_recover);
+	del_timer_sync(&priv->watchdog);
 
 	iwl_clear_ucode_stations(priv, NULL);
 	iwl_dealloc_bcast_stations(priv);
@@ -2978,7 +2811,8 @@ static void __iwl_down(struct iwl_priv *priv)
 				STATUS_EXIT_PENDING;
 
 	/* device going down, Stop using ICT table */
-	iwl_disable_ict(priv);
+	if (priv->cfg->ops->lib->isr_ops.disable)
+		priv->cfg->ops->lib->isr_ops.disable(priv);
 
 	iwlagn_txq_ctx_stop(priv);
 	iwlagn_rxq_stop(priv);
@@ -3201,7 +3035,8 @@ static void iwl_bg_alive_start(struct work_struct *data)
 		return;
 
 	/* enable dram interrupt */
-	iwl_reset_ict(priv);
+	if (priv->cfg->ops->lib->isr_ops.reset)
+		priv->cfg->ops->lib->isr_ops.reset(priv);
 
 	mutex_lock(&priv->mutex);
 	iwl_alive_start(priv);
@@ -3309,92 +3144,6 @@ static void iwl_bg_rx_replenish(struct work_struct *data)
 	mutex_unlock(&priv->mutex);
 }
 
-#define IWL_DELAY_NEXT_SCAN (HZ*2)
-
-void iwl_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif)
-{
-	struct iwl_rxon_context *ctx;
-	struct ieee80211_conf *conf = NULL;
-	int ret = 0;
-
-	if (!vif || !priv->is_open)
-		return;
-
-	ctx = iwl_rxon_ctx_from_vif(vif);
-
-	if (vif->type == NL80211_IFTYPE_AP) {
-		IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
-		return;
-	}
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	iwl_scan_cancel_timeout(priv, 200);
-
-	conf = ieee80211_get_hw_conf(priv->hw);
-
-	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwlcore_commit_rxon(priv, ctx);
-
-	ret = iwl_send_rxon_timing(priv, ctx);
-	if (ret)
-		IWL_WARN(priv, "RXON timing - "
-			    "Attempting to continue.\n");
-
-	ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-
-	iwl_set_rxon_ht(priv, &priv->current_ht_config);
-
-	if (priv->cfg->ops->hcmd->set_rxon_chain)
-		priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-
-	ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
-
-	IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
-			vif->bss_conf.aid, vif->bss_conf.beacon_int);
-
-	if (vif->bss_conf.use_short_preamble)
-		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-	else
-		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
-	if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
-		if (vif->bss_conf.use_short_slot)
-			ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
-		else
-			ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
-	}
-
-	iwlcore_commit_rxon(priv, ctx);
-
-	IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
-			vif->bss_conf.aid, ctx->active.bssid_addr);
-
-	switch (vif->type) {
-	case NL80211_IFTYPE_STATION:
-		break;
-	case NL80211_IFTYPE_ADHOC:
-		iwl_send_beacon_cmd(priv);
-		break;
-	default:
-		IWL_ERR(priv, "%s Should not be called in %d mode\n",
-			  __func__, vif->type);
-		break;
-	}
-
-	/* the chain noise calibration will enabled PM upon completion
-	 * If chain noise has already been run, then we need to enable
-	 * power management here */
-	if (priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE)
-		iwl_power_update_mode(priv, false);
-
-	/* Enable Rx differential gain and sensitivity calibrations */
-	iwl_chain_noise_reset(priv);
-	priv->start_calib = 1;
-
-}
-
 /*****************************************************************************
  *
  * mac80211 entry point functions
@@ -3420,7 +3169,8 @@ static int iwl_mac_setup_register(struct iwl_priv *priv,
 	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_AMPDU_AGGREGATION |
 		    IEEE80211_HW_NEED_DTIM_PERIOD |
-		    IEEE80211_HW_SPECTRUM_MGMT;
+		    IEEE80211_HW_SPECTRUM_MGMT |
+		    IEEE80211_HW_REPORTS_TX_ACK_STATUS;
 
 	if (!priv->cfg->base_params->broken_powersave)
 		hw->flags |= IEEE80211_HW_SUPPORTS_PS |
@@ -3474,7 +3224,7 @@ static int iwl_mac_setup_register(struct iwl_priv *priv,
 }
 
 
-static int iwl_mac_start(struct ieee80211_hw *hw)
+int iwlagn_mac_start(struct ieee80211_hw *hw)
 {
 	struct iwl_priv *priv = hw->priv;
 	int ret;
@@ -3515,7 +3265,7 @@ out:
 	return 0;
 }
 
-static void iwl_mac_stop(struct ieee80211_hw *hw)
+void iwlagn_mac_stop(struct ieee80211_hw *hw)
 {
 	struct iwl_priv *priv = hw->priv;
 
@@ -3530,14 +3280,15 @@ static void iwl_mac_stop(struct ieee80211_hw *hw)
 
 	flush_workqueue(priv->workqueue);
 
-	/* enable interrupts again in order to receive rfkill changes */
+	/* User space software may expect getting rfkill changes
+	 * even if interface is down */
 	iwl_write32(priv, CSR_INT, 0xFFFFFFFF);
-	iwl_enable_interrupts(priv);
+	iwl_enable_rfkill_int(priv);
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
-static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+int iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct iwl_priv *priv = hw->priv;
 
@@ -3553,73 +3304,12 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	return NETDEV_TX_OK;
 }
 
-void iwl_config_ap(struct iwl_priv *priv, struct ieee80211_vif *vif)
-{
-	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-	int ret = 0;
-
-	lockdep_assert_held(&priv->mutex);
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	/* The following should be done only at AP bring up */
-	if (!iwl_is_associated_ctx(ctx)) {
-
-		/* RXON - unassoc (to set timing command) */
-		ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-		iwlcore_commit_rxon(priv, ctx);
-
-		/* RXON Timing */
-		ret = iwl_send_rxon_timing(priv, ctx);
-		if (ret)
-			IWL_WARN(priv, "RXON timing failed - "
-					"Attempting to continue.\n");
-
-		/* AP has all antennas */
-		priv->chain_noise_data.active_chains =
-			priv->hw_params.valid_rx_ant;
-		iwl_set_rxon_ht(priv, &priv->current_ht_config);
-		if (priv->cfg->ops->hcmd->set_rxon_chain)
-			priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-
-		ctx->staging.assoc_id = 0;
-
-		if (vif->bss_conf.use_short_preamble)
-			ctx->staging.flags |=
-				RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			ctx->staging.flags &=
-				~RXON_FLG_SHORT_PREAMBLE_MSK;
-
-		if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
-			if (vif->bss_conf.use_short_slot)
-				ctx->staging.flags |=
-					RXON_FLG_SHORT_SLOT_MSK;
-			else
-				ctx->staging.flags &=
-					~RXON_FLG_SHORT_SLOT_MSK;
-		}
-		/* need to send beacon cmd before committing assoc RXON! */
-		iwl_send_beacon_cmd(priv);
-		/* restore RXON assoc */
-		ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-		iwlcore_commit_rxon(priv, ctx);
-	}
-	iwl_send_beacon_cmd(priv);
-
-	/* FIXME - we need to add code here to detect a totally new
-	 * configuration, reset the AP, unassoc, rxon timing, assoc,
-	 * clear sta table, add BCAST sta... */
-}
-
-static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
-				    struct ieee80211_vif *vif,
-				    struct ieee80211_key_conf *keyconf,
-				    struct ieee80211_sta *sta,
-				    u32 iv32, u16 *phase1key)
+void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_key_conf *keyconf,
+				struct ieee80211_sta *sta,
+				u32 iv32, u16 *phase1key)
 {
-
 	struct iwl_priv *priv = hw->priv;
 	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
 
@@ -3631,10 +3321,9 @@ static void iwl_mac_update_tkip_key(struct ieee80211_hw *hw,
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
-static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
-			   struct ieee80211_vif *vif,
-			   struct ieee80211_sta *sta,
-			   struct ieee80211_key_conf *key)
+int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		       struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+		       struct ieee80211_key_conf *key)
 {
 	struct iwl_priv *priv = hw->priv;
 	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
@@ -3701,10 +3390,10 @@ static int iwl_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	return ret;
 }
 
-static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
-				struct ieee80211_vif *vif,
-				enum ieee80211_ampdu_mlme_action action,
-				struct ieee80211_sta *sta, u16 tid, u16 *ssn)
+int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    enum ieee80211_ampdu_mlme_action action,
+			    struct ieee80211_sta *sta, u16 tid, u16 *ssn)
 {
 	struct iwl_priv *priv = hw->priv;
 	int ret = -EINVAL;
@@ -3785,39 +3474,9 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw,
 	return ret;
 }
 
-static void iwl_mac_sta_notify(struct ieee80211_hw *hw,
-			       struct ieee80211_vif *vif,
-			       enum sta_notify_cmd cmd,
-			       struct ieee80211_sta *sta)
-{
-	struct iwl_priv *priv = hw->priv;
-	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
-	int sta_id;
-
-	switch (cmd) {
-	case STA_NOTIFY_SLEEP:
-		WARN_ON(!sta_priv->client);
-		sta_priv->asleep = true;
-		if (atomic_read(&sta_priv->pending_frames) > 0)
-			ieee80211_sta_block_awake(hw, sta, true);
-		break;
-	case STA_NOTIFY_AWAKE:
-		WARN_ON(!sta_priv->client);
-		if (!sta_priv->asleep)
-			break;
-		sta_priv->asleep = false;
-		sta_id = iwl_sta_id(sta);
-		if (sta_id != IWL_INVALID_STATION)
-			iwl_sta_modify_ps_wake(priv, sta_id);
-		break;
-	default:
-		break;
-	}
-}
-
-static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
-			      struct ieee80211_vif *vif,
-			      struct ieee80211_sta *sta)
+int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
+		       struct ieee80211_vif *vif,
+		       struct ieee80211_sta *sta)
 {
 	struct iwl_priv *priv = hw->priv;
 	struct iwl_station_priv *sta_priv = (void *)sta->drv_priv;
@@ -3858,8 +3517,8 @@ static int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
 	return 0;
 }
 
-static void iwl_mac_channel_switch(struct ieee80211_hw *hw,
-				   struct ieee80211_channel_switch *ch_switch)
+void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
+			       struct ieee80211_channel_switch *ch_switch)
 {
 	struct iwl_priv *priv = hw->priv;
 	const struct iwl_channel_info *ch_info;
@@ -3956,10 +3615,10 @@ out_exit:
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
-static void iwlagn_configure_filter(struct ieee80211_hw *hw,
-				    unsigned int changed_flags,
-				    unsigned int *total_flags,
-				    u64 multicast)
+void iwlagn_configure_filter(struct ieee80211_hw *hw,
+			     unsigned int changed_flags,
+			     unsigned int *total_flags,
+			     u64 multicast)
 {
 	struct iwl_priv *priv = hw->priv;
 	__le32 filter_or = 0, filter_nand = 0;
@@ -3976,7 +3635,8 @@ static void iwlagn_configure_filter(struct ieee80211_hw *hw,
 			changed_flags, *total_flags);
 
 	CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
-	CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
+	/* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
+	CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
 	CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
 
 #undef CHK
@@ -3986,7 +3646,11 @@ static void iwlagn_configure_filter(struct ieee80211_hw *hw,
 	for_each_context(priv, ctx) {
 		ctx->staging.filter_flags &= ~filter_nand;
 		ctx->staging.filter_flags |= filter_or;
-		iwlcore_commit_rxon(priv, ctx);
+
+		/*
+		 * Not committing directly because hardware can perform a scan,
+		 * but we'll eventually commit the filter flags change anyway.
+		 */
 	}
 
 	mutex_unlock(&priv->mutex);
@@ -4001,7 +3665,7 @@ static void iwlagn_configure_filter(struct ieee80211_hw *hw,
 			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
 }
 
-static void iwl_mac_flush(struct ieee80211_hw *hw, bool drop)
+void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop)
 {
 	struct iwl_priv *priv = hw->priv;
 
@@ -4074,12 +3738,9 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	priv->ucode_trace.data = (unsigned long)priv;
 	priv->ucode_trace.function = iwl_bg_ucode_trace;
 
-	if (priv->cfg->ops->lib->recover_from_tx_stall) {
-		init_timer(&priv->monitor_recover);
-		priv->monitor_recover.data = (unsigned long)priv;
-		priv->monitor_recover.function =
-			priv->cfg->ops->lib->recover_from_tx_stall;
-	}
+	init_timer(&priv->watchdog);
+	priv->watchdog.data = (unsigned long)priv;
+	priv->watchdog.function = iwl_bg_watchdog;
 
 	if (!priv->cfg->base_params->use_isr_legacy)
 		tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
@@ -4172,13 +3833,13 @@ static int iwl_init_drv(struct iwl_priv *priv)
 		priv->bt_on_thresh = BT_ON_THRESHOLD_DEF;
 		priv->bt_duration = BT_DURATION_LIMIT_DEF;
 		priv->dynamic_frag_thresh = BT_FRAG_THRESHOLD_DEF;
-		priv->dynamic_agg_thresh = BT_AGG_THRESHOLD_DEF;
 	}
 
 	/* Set the tx_power_user_lmt to the lowest power level
 	 * this value will get overwritten by channel max power avg
 	 * from eeprom */
 	priv->tx_power_user_lmt = IWLAGN_TX_POWER_TARGET_POWER_MIN;
+	priv->tx_power_next = IWLAGN_TX_POWER_TARGET_POWER_MIN;
 
 	ret = iwl_init_channel_map(priv);
 	if (ret) {
@@ -4209,28 +3870,30 @@ static void iwl_uninit_drv(struct iwl_priv *priv)
 	kfree(priv->scan_cmd);
 }
 
-static struct ieee80211_ops iwl_hw_ops = {
-	.tx = iwl_mac_tx,
-	.start = iwl_mac_start,
-	.stop = iwl_mac_stop,
+#ifdef CONFIG_IWL5000
+struct ieee80211_ops iwlagn_hw_ops = {
+	.tx = iwlagn_mac_tx,
+	.start = iwlagn_mac_start,
+	.stop = iwlagn_mac_stop,
 	.add_interface = iwl_mac_add_interface,
 	.remove_interface = iwl_mac_remove_interface,
-	.config = iwl_mac_config,
+	.change_interface = iwl_mac_change_interface,
+	.config = iwlagn_mac_config,
 	.configure_filter = iwlagn_configure_filter,
-	.set_key = iwl_mac_set_key,
-	.update_tkip_key = iwl_mac_update_tkip_key,
+	.set_key = iwlagn_mac_set_key,
+	.update_tkip_key = iwlagn_mac_update_tkip_key,
 	.conf_tx = iwl_mac_conf_tx,
-	.reset_tsf = iwl_mac_reset_tsf,
-	.bss_info_changed = iwl_bss_info_changed,
-	.ampdu_action = iwl_mac_ampdu_action,
+	.bss_info_changed = iwlagn_bss_info_changed,
+	.ampdu_action = iwlagn_mac_ampdu_action,
 	.hw_scan = iwl_mac_hw_scan,
-	.sta_notify = iwl_mac_sta_notify,
+	.sta_notify = iwlagn_mac_sta_notify,
 	.sta_add = iwlagn_mac_sta_add,
 	.sta_remove = iwl_mac_sta_remove,
-	.channel_switch = iwl_mac_channel_switch,
-	.flush = iwl_mac_flush,
+	.channel_switch = iwlagn_mac_channel_switch,
+	.flush = iwlagn_mac_flush,
 	.tx_last_beacon = iwl_mac_tx_last_beacon,
 };
+#endif
 
 static void iwl_hw_detect(struct iwl_priv *priv)
 {
@@ -4298,10 +3961,15 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (cfg->mod_params->disable_hw_scan) {
 		dev_printk(KERN_DEBUG, &(pdev->dev),
 			"sw scan support is deprecated\n");
-		iwl_hw_ops.hw_scan = NULL;
+#ifdef CONFIG_IWL5000
+		iwlagn_hw_ops.hw_scan = NULL;
+#endif
+#ifdef CONFIG_IWL4965
+		iwl4965_hw_ops.hw_scan = NULL;
+#endif
 	}
 
-	hw = iwl_alloc_all(cfg, &iwl_hw_ops);
+	hw = iwl_alloc_all(cfg);
 	if (!hw) {
 		err = -ENOMEM;
 		goto out;
@@ -4333,6 +4001,7 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		BIT(NL80211_IFTYPE_ADHOC);
 	priv->contexts[IWL_RXON_CTX_BSS].interface_modes =
 		BIT(NL80211_IFTYPE_STATION);
+	priv->contexts[IWL_RXON_CTX_BSS].ap_devtype = RXON_DEV_TYPE_AP;
 	priv->contexts[IWL_RXON_CTX_BSS].ibss_devtype = RXON_DEV_TYPE_IBSS;
 	priv->contexts[IWL_RXON_CTX_BSS].station_devtype = RXON_DEV_TYPE_ESS;
 	priv->contexts[IWL_RXON_CTX_BSS].unused_devtype = RXON_DEV_TYPE_ESS;
@@ -4368,8 +4037,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		(iwlagn_ant_coupling > IWL_BT_ANTENNA_COUPLING_THRESHOLD) ?
 		true : false;
 
-	/* enable/disable bt channel announcement */
+	/* enable/disable bt channel inhibition */
 	priv->bt_ch_announce = iwlagn_bt_ch_announce;
+	IWL_DEBUG_INFO(priv, "BT channel inhibition is %s\n",
+		       (priv->bt_ch_announce) ? "On" : "Off");
 
 	if (iwl_alloc_traffic_mem(priv))
 		IWL_ERR(priv, "Not enough memory to generate traffic log\n");
@@ -4461,6 +4132,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		goto out_free_eeprom;
 
+	err = iwl_eeprom_check_sku(priv);
+	if (err)
+		goto out_free_eeprom;
+
 	/* extract MAC Address */
 	iwl_eeprom_get_mac(priv, priv->addresses[0].addr);
 	IWL_DEBUG_INFO(priv, "MAC address: %pM\n", priv->addresses[0].addr);
@@ -4500,8 +4175,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_enable_msi(priv->pci_dev);
 
-	iwl_alloc_isr_ict(priv);
-	err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
+	if (priv->cfg->ops->lib->isr_ops.alloc)
+		priv->cfg->ops->lib->isr_ops.alloc(priv);
+
+	err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr,
 			  IRQF_SHARED, DRV_NAME, priv);
 	if (err) {
 		IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
@@ -4515,14 +4192,14 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * 8. Enable interrupts and read RFKILL state
 	 *********************************************/
 
-	/* enable interrupts if needed: hw bug w/a */
+	/* enable rfkill interrupt: hw bug w/a */
 	pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
 	if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
 		pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
 		pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
 	}
 
-	iwl_enable_interrupts(priv);
+	iwl_enable_rfkill_int(priv);
 
 	/* If platform's RF_KILL switch is NOT set to KILL */
 	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
@@ -4548,7 +4225,8 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	destroy_workqueue(priv->workqueue);
 	priv->workqueue = NULL;
 	free_irq(priv->pci_dev->irq, priv);
-	iwl_free_isr_ict(priv);
+	if (priv->cfg->ops->lib->isr_ops.free)
+		priv->cfg->ops->lib->isr_ops.free(priv);
  out_disable_msi:
 	pci_disable_msi(priv->pci_dev);
 	iwl_uninit_drv(priv);
@@ -4643,7 +4321,8 @@ static void __devexit iwl_pci_remove(struct pci_dev *pdev)
 
 	iwl_uninit_drv(priv);
 
-	iwl_free_isr_ict(priv);
+	if (priv->cfg->ops->lib->isr_ops.free)
+		priv->cfg->ops->lib->isr_ops.free(priv);
 
 	dev_kfree_skb(priv->beacon_skb);
 
@@ -4734,51 +4413,32 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)},
 	{IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)},
 
-/* 6x00 Series Gen2a */
-	{IWL_PCI_DEVICE(0x0082, 0x1201, iwl6000g2a_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0085, 0x1211, iwl6000g2a_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0082, 0x1221, iwl6000g2a_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0082, 0x1206, iwl6000g2a_2abg_cfg)},
-	{IWL_PCI_DEVICE(0x0085, 0x1216, iwl6000g2a_2abg_cfg)},
-	{IWL_PCI_DEVICE(0x0082, 0x1226, iwl6000g2a_2abg_cfg)},
-	{IWL_PCI_DEVICE(0x0082, 0x1207, iwl6000g2a_2bg_cfg)},
-	{IWL_PCI_DEVICE(0x0082, 0x1301, iwl6000g2a_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0082, 0x1306, iwl6000g2a_2abg_cfg)},
-	{IWL_PCI_DEVICE(0x0082, 0x1307, iwl6000g2a_2bg_cfg)},
-	{IWL_PCI_DEVICE(0x0082, 0x1321, iwl6000g2a_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0082, 0x1326, iwl6000g2a_2abg_cfg)},
-	{IWL_PCI_DEVICE(0x0085, 0x1311, iwl6000g2a_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0085, 0x1316, iwl6000g2a_2abg_cfg)},
-
-/* 6x00 Series Gen2b */
-	{IWL_PCI_DEVICE(0x008F, 0x5105, iwl6000g2b_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0090, 0x5115, iwl6000g2b_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x008F, 0x5125, iwl6000g2b_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x008F, 0x5107, iwl6000g2b_bg_cfg)},
-	{IWL_PCI_DEVICE(0x008F, 0x5201, iwl6000g2b_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0090, 0x5211, iwl6000g2b_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x008F, 0x5221, iwl6000g2b_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x008F, 0x5206, iwl6000g2b_2abg_cfg)},
-	{IWL_PCI_DEVICE(0x0090, 0x5216, iwl6000g2b_2abg_cfg)},
-	{IWL_PCI_DEVICE(0x008F, 0x5226, iwl6000g2b_2abg_cfg)},
-	{IWL_PCI_DEVICE(0x008F, 0x5207, iwl6000g2b_2bg_cfg)},
-	{IWL_PCI_DEVICE(0x008A, 0x5301, iwl6000g2b_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x008A, 0x5305, iwl6000g2b_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x008A, 0x5307, iwl6000g2b_bg_cfg)},
-	{IWL_PCI_DEVICE(0x008A, 0x5321, iwl6000g2b_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x008A, 0x5325, iwl6000g2b_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x008B, 0x5311, iwl6000g2b_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x008B, 0x5315, iwl6000g2b_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0090, 0x5211, iwl6000g2b_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0090, 0x5215, iwl6000g2b_2bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0090, 0x5216, iwl6000g2b_2abg_cfg)},
-	{IWL_PCI_DEVICE(0x0091, 0x5201, iwl6000g2b_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0091, 0x5205, iwl6000g2b_2bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0091, 0x5206, iwl6000g2b_2abg_cfg)},
-	{IWL_PCI_DEVICE(0x0091, 0x5207, iwl6000g2b_2bg_cfg)},
-	{IWL_PCI_DEVICE(0x0091, 0x5221, iwl6000g2b_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0091, 0x5225, iwl6000g2b_2bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0091, 0x5226, iwl6000g2b_2abg_cfg)},
+/* 6x05 Series */
+	{IWL_PCI_DEVICE(0x0082, 0x1301, iwl6005_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0082, 0x1306, iwl6005_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x0082, 0x1307, iwl6005_2bg_cfg)},
+	{IWL_PCI_DEVICE(0x0082, 0x1321, iwl6005_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0082, 0x1326, iwl6005_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x0085, 0x1311, iwl6005_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0085, 0x1316, iwl6005_2abg_cfg)},
+
+/* 6x30 Series */
+	{IWL_PCI_DEVICE(0x008A, 0x5305, iwl1030_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x008A, 0x5307, iwl1030_bg_cfg)},
+	{IWL_PCI_DEVICE(0x008A, 0x5325, iwl1030_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x008A, 0x5327, iwl1030_bg_cfg)},
+	{IWL_PCI_DEVICE(0x008B, 0x5315, iwl1030_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x008B, 0x5317, iwl1030_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0090, 0x5211, iwl6030_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0090, 0x5215, iwl6030_2bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0090, 0x5216, iwl6030_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x0091, 0x5201, iwl6030_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0091, 0x5205, iwl6030_2bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0091, 0x5206, iwl6030_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x0091, 0x5207, iwl6030_2bg_cfg)},
+	{IWL_PCI_DEVICE(0x0091, 0x5221, iwl6030_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0091, 0x5225, iwl6030_2bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0091, 0x5226, iwl6030_2abg_cfg)},
 
 /* 6x50 WiFi/WiMax Series */
 	{IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
@@ -4788,13 +4448,13 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 	{IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
 	{IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
 
-/* 6x50 WiFi/WiMax Series Gen2 */
-	{IWL_PCI_DEVICE(0x0885, 0x1305, iwl6050g2_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0885, 0x1306, iwl6050g2_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0885, 0x1325, iwl6050g2_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0885, 0x1326, iwl6050g2_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0886, 0x1315, iwl6050g2_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0886, 0x1316, iwl6050g2_bgn_cfg)},
+/* 6150 WiFi/WiMax Series */
+	{IWL_PCI_DEVICE(0x0885, 0x1305, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0885, 0x1306, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0885, 0x1325, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0885, 0x1326, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0886, 0x1315, iwl6150_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0886, 0x1316, iwl6150_bgn_cfg)},
 
 /* 1000 Series WiFi */
 	{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
@@ -4812,10 +4472,11 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = {
 
 /* 100 Series WiFi */
 	{IWL_PCI_DEVICE(0x08AE, 0x1005, iwl100_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x08AE, 0x1007, iwl100_bg_cfg)},
 	{IWL_PCI_DEVICE(0x08AF, 0x1015, iwl100_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x08AF, 0x1017, iwl100_bg_cfg)},
 	{IWL_PCI_DEVICE(0x08AE, 0x1025, iwl100_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x08AE, 0x1007, iwl100_bg_cfg)},
-	{IWL_PCI_DEVICE(0x08AE, 0x1017, iwl100_bg_cfg)},
+	{IWL_PCI_DEVICE(0x08AE, 0x1027, iwl100_bg_cfg)},
 
 /* 130 Series WiFi */
 	{IWL_PCI_DEVICE(0x0896, 0x5005, iwl130_bgn_cfg)},
@@ -4836,10 +4497,7 @@ static struct pci_driver iwl_driver = {
 	.id_table = iwl_hw_card_ids,
 	.probe = iwl_pci_probe,
 	.remove = __devexit_p(iwl_pci_remove),
-#ifdef CONFIG_PM
-	.suspend = iwl_pci_suspend,
-	.resume = iwl_pci_resume,
-#endif
+	.driver.pm = IWL_PM_OPS,
 };
 
 static int __init iwl_init(void)
@@ -4925,6 +4583,6 @@ module_param_named(antenna_coupling, iwlagn_ant_coupling, int, S_IRUGO);
 MODULE_PARM_DESC(antenna_coupling,
 		 "specify antenna coupling in dB (defualt: 0 dB)");
 
-module_param_named(bt_ch_announce, iwlagn_bt_ch_announce, bool, S_IRUGO);
-MODULE_PARM_DESC(bt_ch_announce,
-		 "Enable BT channel announcement mode (default: enable)");
+module_param_named(bt_ch_inhibition, iwlagn_bt_ch_announce, bool, S_IRUGO);
+MODULE_PARM_DESC(bt_ch_inhibition,
+		 "Disable BT channel inhibition (default: enable)");
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.h b/drivers/net/wireless/iwlwifi/iwl-agn.h
index f525d55f2c0..da303585f80 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.h
@@ -74,22 +74,22 @@ extern struct iwl_cfg iwl5100_bgn_cfg;
 extern struct iwl_cfg iwl5100_abg_cfg;
 extern struct iwl_cfg iwl5150_agn_cfg;
 extern struct iwl_cfg iwl5150_abg_cfg;
-extern struct iwl_cfg iwl6000g2a_2agn_cfg;
-extern struct iwl_cfg iwl6000g2a_2abg_cfg;
-extern struct iwl_cfg iwl6000g2a_2bg_cfg;
-extern struct iwl_cfg iwl6000g2b_bgn_cfg;
-extern struct iwl_cfg iwl6000g2b_bg_cfg;
-extern struct iwl_cfg iwl6000g2b_2agn_cfg;
-extern struct iwl_cfg iwl6000g2b_2abg_cfg;
-extern struct iwl_cfg iwl6000g2b_2bgn_cfg;
-extern struct iwl_cfg iwl6000g2b_2bg_cfg;
+extern struct iwl_cfg iwl6005_2agn_cfg;
+extern struct iwl_cfg iwl6005_2abg_cfg;
+extern struct iwl_cfg iwl6005_2bg_cfg;
+extern struct iwl_cfg iwl1030_bgn_cfg;
+extern struct iwl_cfg iwl1030_bg_cfg;
+extern struct iwl_cfg iwl6030_2agn_cfg;
+extern struct iwl_cfg iwl6030_2abg_cfg;
+extern struct iwl_cfg iwl6030_2bgn_cfg;
+extern struct iwl_cfg iwl6030_2bg_cfg;
 extern struct iwl_cfg iwl6000i_2agn_cfg;
 extern struct iwl_cfg iwl6000i_2abg_cfg;
 extern struct iwl_cfg iwl6000i_2bg_cfg;
 extern struct iwl_cfg iwl6000_3agn_cfg;
 extern struct iwl_cfg iwl6050_2agn_cfg;
 extern struct iwl_cfg iwl6050_2abg_cfg;
-extern struct iwl_cfg iwl6050g2_bgn_cfg;
+extern struct iwl_cfg iwl6150_bgn_cfg;
 extern struct iwl_cfg iwl1000_bgn_cfg;
 extern struct iwl_cfg iwl1000_bg_cfg;
 extern struct iwl_cfg iwl100_bgn_cfg;
@@ -102,6 +102,9 @@ extern struct iwl_hcmd_ops iwlagn_hcmd;
 extern struct iwl_hcmd_ops iwlagn_bt_hcmd;
 extern struct iwl_hcmd_utils_ops iwlagn_hcmd_utils;
 
+extern struct ieee80211_ops iwlagn_hw_ops;
+extern struct ieee80211_ops iwl4965_hw_ops;
+
 int iwl_reset_ict(struct iwl_priv *priv);
 void iwl_disable_ict(struct iwl_priv *priv);
 int iwl_alloc_isr_ict(struct iwl_priv *priv);
@@ -132,6 +135,11 @@ void iwl_free_tfds_in_queue(struct iwl_priv *priv,
 /* RXON */
 int iwlagn_commit_rxon(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
 void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
+int iwlagn_mac_config(struct ieee80211_hw *hw, u32 changed);
+void iwlagn_bss_info_changed(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_bss_conf *bss_conf,
+			     u32 changes);
 
 /* uCode */
 int iwlagn_load_ucode(struct iwl_priv *priv);
@@ -249,6 +257,7 @@ int iwlagn_manage_ibss_station(struct iwl_priv *priv,
 int iwlagn_send_rxon_assoc(struct iwl_priv *priv,
 			   struct iwl_rxon_context *ctx);
 int iwlagn_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant);
+int iwlagn_send_beacon_cmd(struct iwl_priv *priv);
 
 /* bt coex */
 void iwlagn_send_advance_bt_config(struct iwl_priv *priv);
@@ -292,9 +301,12 @@ int iwl_sta_rx_agg_start(struct iwl_priv *priv, struct ieee80211_sta *sta,
 			 int tid, u16 ssn);
 int iwl_sta_rx_agg_stop(struct iwl_priv *priv, struct ieee80211_sta *sta,
 			int tid);
-void iwl_sta_modify_ps_wake(struct iwl_priv *priv, int sta_id);
 void iwl_sta_modify_sleep_tx_count(struct iwl_priv *priv, int sta_id, int cnt);
 int iwl_update_bcast_stations(struct iwl_priv *priv);
+void iwlagn_mac_sta_notify(struct ieee80211_hw *hw,
+			   struct ieee80211_vif *vif,
+			   enum sta_notify_cmd cmd,
+			   struct ieee80211_sta *sta);
 
 /* rate */
 static inline u32 iwl_ant_idx_to_flags(u8 ant_idx)
@@ -318,4 +330,31 @@ void iwl_eeprom_get_mac(const struct iwl_priv *priv, u8 *mac);
 int iwlcore_eeprom_acquire_semaphore(struct iwl_priv *priv);
 void iwlcore_eeprom_release_semaphore(struct iwl_priv *priv);
 
+/* mac80211 handlers (for 4965) */
+int iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
+int iwlagn_mac_start(struct ieee80211_hw *hw);
+void iwlagn_mac_stop(struct ieee80211_hw *hw);
+void iwlagn_configure_filter(struct ieee80211_hw *hw,
+			     unsigned int changed_flags,
+			     unsigned int *total_flags,
+			     u64 multicast);
+int iwlagn_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+		       struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+		       struct ieee80211_key_conf *key);
+void iwlagn_mac_update_tkip_key(struct ieee80211_hw *hw,
+				struct ieee80211_vif *vif,
+				struct ieee80211_key_conf *keyconf,
+				struct ieee80211_sta *sta,
+				u32 iv32, u16 *phase1key);
+int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw,
+			    struct ieee80211_vif *vif,
+			    enum ieee80211_ampdu_mlme_action action,
+			    struct ieee80211_sta *sta, u16 tid, u16 *ssn);
+int iwlagn_mac_sta_add(struct ieee80211_hw *hw,
+		       struct ieee80211_vif *vif,
+		       struct ieee80211_sta *sta);
+void iwlagn_mac_channel_switch(struct ieee80211_hw *hw,
+			       struct ieee80211_channel_switch *ch_switch);
+void iwlagn_mac_flush(struct ieee80211_hw *hw, bool drop);
+
 #endif /* __iwl_agn_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 424801abc80..f893d4a6aa8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -2022,6 +2022,9 @@ struct iwl_compressed_ba_resp {
 	__le64 bitmap;
 	__le16 scd_flow;
 	__le16 scd_ssn;
+	/* following only for 5000 series and up */
+	u8 txed;	/* number of frames sent */
+	u8 txed_2_done; /* number of frames acked */
 } __packed;
 
 /*
@@ -2407,9 +2410,9 @@ struct iwl_link_quality_cmd {
 #define BT_FRAG_THRESHOLD_MAX	0
 #define BT_FRAG_THRESHOLD_MIN	0
 
-#define BT_AGG_THRESHOLD_DEF	0
-#define BT_AGG_THRESHOLD_MAX	0
-#define BT_AGG_THRESHOLD_MIN	0
+#define BT_AGG_THRESHOLD_DEF	1200
+#define BT_AGG_THRESHOLD_MAX	8000
+#define BT_AGG_THRESHOLD_MIN	400
 
 /*
  * REPLY_BT_CONFIG = 0x9b (command, has simple generic response)
@@ -2436,8 +2439,9 @@ struct iwl_bt_cmd {
 #define IWLAGN_BT_FLAG_COEX_MODE_3W		2
 #define IWLAGN_BT_FLAG_COEX_MODE_4W		3
 
-#define IWLAGN_BT_FLAG_UCODE_DEFAULT	BIT(6)
-#define IWLAGN_BT_FLAG_NOCOEX_NOTIF	BIT(7)
+#define IWLAGN_BT_FLAG_UCODE_DEFAULT		BIT(6)
+/* Disable Sync PSPoll on SCO/eSCO */
+#define IWLAGN_BT_FLAG_SYNC_2_BT_DISABLE	BIT(7)
 
 #define IWLAGN_BT_PRIO_BOOST_MAX	0xFF
 #define IWLAGN_BT_PRIO_BOOST_MIN	0x00
@@ -2447,8 +2451,9 @@ struct iwl_bt_cmd {
 
 #define IWLAGN_BT3_T7_DEFAULT		1
 
-#define IWLAGN_BT_KILL_ACK_MASK_DEFAULT	cpu_to_le32(0xffffffff)
-#define IWLAGN_BT_KILL_CTS_MASK_DEFAULT	cpu_to_le32(0xffffffff)
+#define IWLAGN_BT_KILL_ACK_MASK_DEFAULT	cpu_to_le32(0xffff0000)
+#define IWLAGN_BT_KILL_CTS_MASK_DEFAULT	cpu_to_le32(0xffff0000)
+#define IWLAGN_BT_KILL_ACK_CTS_MASK_SCO	cpu_to_le32(0xffffffff)
 
 #define IWLAGN_BT3_PRIO_SAMPLE_DEFAULT	2
 
@@ -2664,9 +2669,16 @@ struct iwl_spectrum_notification {
 #define IWL_POWER_VEC_SIZE 5
 
 #define IWL_POWER_DRIVER_ALLOW_SLEEP_MSK	cpu_to_le16(BIT(0))
+#define IWL_POWER_POWER_SAVE_ENA_MSK		cpu_to_le16(BIT(0))
+#define IWL_POWER_POWER_MANAGEMENT_ENA_MSK	cpu_to_le16(BIT(1))
 #define IWL_POWER_SLEEP_OVER_DTIM_MSK		cpu_to_le16(BIT(2))
 #define IWL_POWER_PCI_PM_MSK			cpu_to_le16(BIT(3))
 #define IWL_POWER_FAST_PD			cpu_to_le16(BIT(4))
+#define IWL_POWER_BEACON_FILTERING		cpu_to_le16(BIT(5))
+#define IWL_POWER_SHADOW_REG_ENA		cpu_to_le16(BIT(6))
+#define IWL_POWER_CT_KILL_SET			cpu_to_le16(BIT(7))
+#define IWL_POWER_BT_SCO_ENA			cpu_to_le16(BIT(8))
+#define IWL_POWER_ADVANCE_PM_ENA_MSK		cpu_to_le16(BIT(9))
 
 struct iwl3945_powertable_cmd {
 	__le16 flags;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 25fb3912342..efbde1f1a8b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -77,15 +77,15 @@ EXPORT_SYMBOL(iwl_bcast_addr);
 
 
 /* This function both allocates and initializes hw and priv. */
-struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
-		struct ieee80211_ops *hw_ops)
+struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg)
 {
 	struct iwl_priv *priv;
-
 	/* mac80211 allocates memory for this device instance, including
 	 *   space for this driver's private structure */
-	struct ieee80211_hw *hw =
-		ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops);
+	struct ieee80211_hw *hw;
+
+	hw = ieee80211_alloc_hw(sizeof(struct iwl_priv),
+				cfg->ops->ieee80211_ops);
 	if (hw == NULL) {
 		pr_err("%s: Can not allocate network device\n",
 		       cfg->name);
@@ -100,35 +100,6 @@ out:
 }
 EXPORT_SYMBOL(iwl_alloc_all);
 
-/*
- * QoS  support
-*/
-static void iwl_update_qos(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
-{
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	if (!ctx->is_active)
-		return;
-
-	ctx->qos_data.def_qos_parm.qos_flags = 0;
-
-	if (ctx->qos_data.qos_active)
-		ctx->qos_data.def_qos_parm.qos_flags |=
-			QOS_PARAM_FLG_UPDATE_EDCA_MSK;
-
-	if (ctx->ht.enabled)
-		ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
-
-	IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
-		      ctx->qos_data.qos_active,
-		      ctx->qos_data.def_qos_parm.qos_flags);
-
-	iwl_send_cmd_pdu_async(priv, ctx->qos_cmd,
-			       sizeof(struct iwl_qosparam_cmd),
-			       &ctx->qos_data.def_qos_parm, NULL);
-}
-
 #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */
 #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */
 static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
@@ -317,40 +288,6 @@ void iwlcore_free_geos(struct iwl_priv *priv)
 }
 EXPORT_SYMBOL(iwlcore_free_geos);
 
-/*
- *  iwlcore_tx_cmd_protection: Set rts/cts. 3945 and 4965 only share this
- *  function.
- */
-void iwlcore_tx_cmd_protection(struct iwl_priv *priv,
-			       struct ieee80211_tx_info *info,
-			       __le16 fc, __le32 *tx_flags)
-{
-	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		*tx_flags |= TX_CMD_FLG_RTS_MSK;
-		*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
-		*tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
-
-		if (!ieee80211_is_mgmt(fc))
-			return;
-
-		switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
-		case cpu_to_le16(IEEE80211_STYPE_AUTH):
-		case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
-		case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
-		case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
-			*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
-			*tx_flags |= TX_CMD_FLG_CTS_MSK;
-			break;
-		}
-	} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
-		*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
-		*tx_flags |= TX_CMD_FLG_CTS_MSK;
-		*tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
-	}
-}
-EXPORT_SYMBOL(iwlcore_tx_cmd_protection);
-
-
 static bool iwl_is_channel_extension(struct iwl_priv *priv,
 				     enum ieee80211_band band,
 				     u16 channel, u8 extension_chan_offset)
@@ -1020,6 +957,22 @@ void iwl_irq_handle_error(struct iwl_priv *priv)
 	/* Cancel currently queued command. */
 	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
 
+	/* W/A for WiFi/WiMAX coex and WiMAX own the RF */
+	if (priv->cfg->internal_wimax_coex &&
+	    (!(iwl_read_prph(priv, APMG_CLK_CTRL_REG) &
+			APMS_CLK_VAL_MRB_FUNC_MODE) ||
+	     (iwl_read_prph(priv, APMG_PS_CTRL_REG) &
+			APMG_PS_CTRL_VAL_RESET_REQ))) {
+		wake_up_interruptible(&priv->wait_command_queue);
+		/*
+		 *Keep the restart process from trying to send host
+		 * commands by clearing the INIT status bit
+		 */
+		clear_bit(STATUS_READY, &priv->status);
+		IWL_ERR(priv, "RF is used by WiMAX\n");
+		return;
+	}
+
 	IWL_ERR(priv, "Loaded firmware version: %s\n",
 		priv->hw->wiphy->fw_version);
 
@@ -1206,8 +1159,16 @@ EXPORT_SYMBOL(iwl_apm_init);
 
 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 {
-	int ret = 0;
-	s8 prev_tx_power = priv->tx_power_user_lmt;
+	int ret;
+	s8 prev_tx_power;
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (priv->tx_power_user_lmt == tx_power && !force)
+		return 0;
+
+	if (!priv->cfg->ops->lib->send_tx_power)
+		return -EOPNOTSUPP;
 
 	if (tx_power < IWLAGN_TX_POWER_TARGET_POWER_MIN) {
 		IWL_WARN(priv,
@@ -1224,93 +1185,29 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 		return -EINVAL;
 	}
 
-	if (priv->tx_power_user_lmt != tx_power)
-		force = true;
+	if (!iwl_is_ready_rf(priv))
+		return -EIO;
 
-	/* if nic is not up don't send command */
-	if (iwl_is_ready_rf(priv)) {
-		priv->tx_power_user_lmt = tx_power;
-		if (force && priv->cfg->ops->lib->send_tx_power)
-			ret = priv->cfg->ops->lib->send_tx_power(priv);
-		else if (!priv->cfg->ops->lib->send_tx_power)
-			ret = -EOPNOTSUPP;
-		/*
-		 * if fail to set tx_power, restore the orig. tx power
-		 */
-		if (ret)
-			priv->tx_power_user_lmt = prev_tx_power;
+	/* scan complete use tx_power_next, need to be updated */
+	priv->tx_power_next = tx_power;
+	if (test_bit(STATUS_SCANNING, &priv->status) && !force) {
+		IWL_DEBUG_INFO(priv, "Deferring tx power set while scanning\n");
+		return 0;
 	}
 
-	/*
-	 * Even this is an async host command, the command
-	 * will always report success from uCode
-	 * So once driver can placing the command into the queue
-	 * successfully, driver can use priv->tx_power_user_lmt
-	 * to reflect the current tx power
-	 */
-	return ret;
-}
-EXPORT_SYMBOL(iwl_set_tx_power);
+	prev_tx_power = priv->tx_power_user_lmt;
+	priv->tx_power_user_lmt = tx_power;
 
-irqreturn_t iwl_isr_legacy(int irq, void *data)
-{
-	struct iwl_priv *priv = data;
-	u32 inta, inta_mask;
-	u32 inta_fh;
-	unsigned long flags;
-	if (!priv)
-		return IRQ_NONE;
-
-	spin_lock_irqsave(&priv->lock, flags);
+	ret = priv->cfg->ops->lib->send_tx_power(priv);
 
-	/* Disable (but don't clear!) interrupts here to avoid
-	 *    back-to-back ISRs and sporadic interrupts from our NIC.
-	 * If we have something to service, the tasklet will re-enable ints.
-	 * If we *don't* have something, we'll re-enable before leaving here. */
-	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
-	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
-
-	/* Discover which interrupts are active/pending */
-	inta = iwl_read32(priv, CSR_INT);
-	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
-
-	/* Ignore interrupt if there's nothing in NIC to service.
-	 * This may be due to IRQ shared with another device,
-	 * or due to sporadic interrupts thrown from our NIC. */
-	if (!inta && !inta_fh) {
-		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0, inta_fh == 0\n");
-		goto none;
+	/* if fail to set tx_power, restore the orig. tx power */
+	if (ret) {
+		priv->tx_power_user_lmt = prev_tx_power;
+		priv->tx_power_next = prev_tx_power;
 	}
-
-	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
-		/* Hardware disappeared. It might have already raised
-		 * an interrupt */
-		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
-		goto unplugged;
-	}
-
-	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
-		      inta, inta_mask, inta_fh);
-
-	inta &= ~CSR_INT_BIT_SCD;
-
-	/* iwl_irq_tasklet() will service interrupts and re-enable them */
-	if (likely(inta || inta_fh))
-		tasklet_schedule(&priv->irq_tasklet);
-
- unplugged:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return IRQ_HANDLED;
-
- none:
-	/* re-enable interrupts here since we don't have anything to service. */
-	/* only Re-enable if diabled by irq */
-	if (test_bit(STATUS_INT_ENABLED, &priv->status))
-		iwl_enable_interrupts(priv);
-	spin_unlock_irqrestore(&priv->lock, flags);
-	return IRQ_NONE;
+	return ret;
 }
-EXPORT_SYMBOL(iwl_isr_legacy);
+EXPORT_SYMBOL(iwl_set_tx_power);
 
 void iwl_send_bt_config(struct iwl_priv *priv)
 {
@@ -1326,6 +1223,7 @@ void iwl_send_bt_config(struct iwl_priv *priv)
 	else
 		bt_cmd.flags = BT_COEX_ENABLE;
 
+	priv->bt_enable_flag = bt_cmd.flags;
 	IWL_DEBUG_INFO(priv, "BT coex %s\n",
 		(bt_cmd.flags == BT_COEX_DISABLE) ? "disable" : "active");
 
@@ -1452,318 +1350,51 @@ int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw)
 }
 EXPORT_SYMBOL_GPL(iwl_mac_tx_last_beacon);
 
-static void iwl_ht_conf(struct iwl_priv *priv,
-			struct ieee80211_vif *vif)
+static int iwl_set_mode(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 {
-	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
-	struct ieee80211_sta *sta;
-	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
-	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
-	IWL_DEBUG_MAC80211(priv, "enter:\n");
-
-	if (!ctx->ht.enabled)
-		return;
-
-	ctx->ht.protection =
-		bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
-	ctx->ht.non_gf_sta_present =
-		!!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
-
-	ht_conf->single_chain_sufficient = false;
-
-	switch (vif->type) {
-	case NL80211_IFTYPE_STATION:
-		rcu_read_lock();
-		sta = ieee80211_find_sta(vif, bss_conf->bssid);
-		if (sta) {
-			struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
-			int maxstreams;
-
-			maxstreams = (ht_cap->mcs.tx_params &
-				      IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
-					>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
-			maxstreams += 1;
-
-			if ((ht_cap->mcs.rx_mask[1] == 0) &&
-			    (ht_cap->mcs.rx_mask[2] == 0))
-				ht_conf->single_chain_sufficient = true;
-			if (maxstreams <= 1)
-				ht_conf->single_chain_sufficient = true;
-		} else {
-			/*
-			 * If at all, this can only happen through a race
-			 * when the AP disconnects us while we're still
-			 * setting up the connection, in that case mac80211
-			 * will soon tell us about that.
-			 */
-			ht_conf->single_chain_sufficient = true;
-		}
-		rcu_read_unlock();
-		break;
-	case NL80211_IFTYPE_ADHOC:
-		ht_conf->single_chain_sufficient = true;
-		break;
-	default:
-		break;
-	}
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
+	iwl_connection_init_rx_config(priv, ctx);
 
-static inline void iwl_set_no_assoc(struct iwl_priv *priv,
-				    struct ieee80211_vif *vif)
-{
-	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
 
-	iwl_led_disassociate(priv);
-	/*
-	 * inform the ucode that there is no longer an
-	 * association and that no more packets should be
-	 * sent
-	 */
-	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	ctx->staging.assoc_id = 0;
-	iwlcore_commit_rxon(priv, ctx);
+	return iwlcore_commit_rxon(priv, ctx);
 }
 
-static void iwlcore_beacon_update(struct ieee80211_hw *hw,
-				  struct ieee80211_vif *vif)
+static int iwl_setup_interface(struct iwl_priv *priv,
+			       struct iwl_rxon_context *ctx)
 {
-	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	__le64 timestamp;
-	struct sk_buff *skb = ieee80211_beacon_get(hw, vif);
-
-	if (!skb)
-		return;
-
-	IWL_DEBUG_ASSOC(priv, "enter\n");
+	struct ieee80211_vif *vif = ctx->vif;
+	int err;
 
 	lockdep_assert_held(&priv->mutex);
 
-	if (!priv->beacon_ctx) {
-		IWL_ERR(priv, "update beacon but no beacon context!\n");
-		dev_kfree_skb(skb);
-		return;
-	}
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	if (priv->beacon_skb)
-		dev_kfree_skb(priv->beacon_skb);
-
-	priv->beacon_skb = skb;
-
-	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
-	priv->timestamp = le64_to_cpu(timestamp);
-
-	IWL_DEBUG_ASSOC(priv, "leave\n");
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
-		return;
-	}
-
-	priv->cfg->ops->lib->post_associate(priv, priv->beacon_ctx->vif);
-}
-
-void iwl_bss_info_changed(struct ieee80211_hw *hw,
-			  struct ieee80211_vif *vif,
-			  struct ieee80211_bss_conf *bss_conf,
-			  u32 changes)
-{
-	struct iwl_priv *priv = hw->priv;
-	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-	int ret;
-
-	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
-
-	if (!iwl_is_alive(priv))
-		return;
-
-	mutex_lock(&priv->mutex);
-
-	if (changes & BSS_CHANGED_QOS) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&priv->lock, flags);
-		ctx->qos_data.qos_active = bss_conf->qos;
-		iwl_update_qos(priv, ctx);
-		spin_unlock_irqrestore(&priv->lock, flags);
-	}
-
-	if (changes & BSS_CHANGED_BEACON_ENABLED) {
-		/*
-		 * the add_interface code must make sure we only ever
-		 * have a single interface that could be beaconing at
-		 * any time.
-		 */
-		if (vif->bss_conf.enable_beacon)
-			priv->beacon_ctx = ctx;
-		else
-			priv->beacon_ctx = NULL;
-	}
-
-	if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_AP) {
-		dev_kfree_skb(priv->beacon_skb);
-		priv->beacon_skb = ieee80211_beacon_get(hw, vif);
-	}
-
-	if (changes & BSS_CHANGED_BEACON_INT && vif->type == NL80211_IFTYPE_AP)
-		iwl_send_rxon_timing(priv, ctx);
-
-	if (changes & BSS_CHANGED_BSSID) {
-		IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid);
-
-		/*
-		 * If there is currently a HW scan going on in the
-		 * background then we need to cancel it else the RXON
-		 * below/in post_associate will fail.
-		 */
-		if (iwl_scan_cancel_timeout(priv, 100)) {
-			IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
-			IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
-			mutex_unlock(&priv->mutex);
-			return;
-		}
-
-		/* mac80211 only sets assoc when in STATION mode */
-		if (vif->type == NL80211_IFTYPE_ADHOC || bss_conf->assoc) {
-			memcpy(ctx->staging.bssid_addr,
-			       bss_conf->bssid, ETH_ALEN);
-
-			/* currently needed in a few places */
-			memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
-		} else {
-			ctx->staging.filter_flags &=
-				~RXON_FILTER_ASSOC_MSK;
-		}
-
-	}
-
 	/*
-	 * This needs to be after setting the BSSID in case
-	 * mac80211 decides to do both changes at once because
-	 * it will invoke post_associate.
+	 * This variable will be correct only when there's just
+	 * a single context, but all code using it is for hardware
+	 * that supports only one context.
 	 */
-	if (vif->type == NL80211_IFTYPE_ADHOC && changes & BSS_CHANGED_BEACON)
-		iwlcore_beacon_update(hw, vif);
-
-	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
-		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
-				   bss_conf->use_short_preamble);
-		if (bss_conf->use_short_preamble)
-			ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
-		else
-			ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-	}
-
-	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
-		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
-		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
-			ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
-		else
-			ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
-		if (bss_conf->use_cts_prot)
-			ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
-		else
-			ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
-	}
-
-	if (changes & BSS_CHANGED_BASIC_RATES) {
-		/* XXX use this information
-		 *
-		 * To do that, remove code from iwl_set_rate() and put something
-		 * like this here:
-		 *
-		if (A-band)
-			ctx->staging.ofdm_basic_rates =
-				bss_conf->basic_rates;
-		else
-			ctx->staging.ofdm_basic_rates =
-				bss_conf->basic_rates >> 4;
-			ctx->staging.cck_basic_rates =
-				bss_conf->basic_rates & 0xF;
-		 */
-	}
-
-	if (changes & BSS_CHANGED_HT) {
-		iwl_ht_conf(priv, vif);
-
-		if (priv->cfg->ops->hcmd->set_rxon_chain)
-			priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-	}
-
-	if (changes & BSS_CHANGED_ASSOC) {
-		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
-		if (bss_conf->assoc) {
-			priv->timestamp = bss_conf->timestamp;
-
-			iwl_led_associate(priv);
-
-			if (!iwl_is_rfkill(priv))
-				priv->cfg->ops->lib->post_associate(priv, vif);
-		} else
-			iwl_set_no_assoc(priv, vif);
-	}
-
-	if (changes && iwl_is_associated_ctx(ctx) && bss_conf->aid) {
-		IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n",
-				   changes);
-		ret = iwl_send_rxon_assoc(priv, ctx);
-		if (!ret) {
-			/* Sync active_rxon with latest change. */
-			memcpy((void *)&ctx->active,
-				&ctx->staging,
-				sizeof(struct iwl_rxon_cmd));
-		}
-	}
+	priv->iw_mode = vif->type;
 
-	if (changes & BSS_CHANGED_BEACON_ENABLED) {
-		if (vif->bss_conf.enable_beacon) {
-			memcpy(ctx->staging.bssid_addr,
-			       bss_conf->bssid, ETH_ALEN);
-			memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
-			iwl_led_associate(priv);
-			iwlcore_config_ap(priv, vif);
-		} else
-			iwl_set_no_assoc(priv, vif);
-	}
+	ctx->is_active = true;
 
-	if (changes & BSS_CHANGED_IBSS) {
-		ret = priv->cfg->ops->lib->manage_ibss_station(priv, vif,
-							bss_conf->ibss_joined);
-		if (ret)
-			IWL_ERR(priv, "failed to %s IBSS station %pM\n",
-				bss_conf->ibss_joined ? "add" : "remove",
-				bss_conf->bssid);
+	err = iwl_set_mode(priv, ctx);
+	if (err) {
+		if (!ctx->always_active)
+			ctx->is_active = false;
+		return err;
 	}
 
-	if (changes & BSS_CHANGED_IDLE &&
-	    priv->cfg->ops->hcmd->set_pan_params) {
-		if (priv->cfg->ops->hcmd->set_pan_params(priv))
-			IWL_ERR(priv, "failed to update PAN params\n");
+	if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist &&
+	    vif->type == NL80211_IFTYPE_ADHOC) {
+		/*
+		 * pretend to have high BT traffic as long as we
+		 * are operating in IBSS mode, as this will cause
+		 * the rate scaling etc. to behave as intended.
+		 */
+		priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
 	}
 
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-}
-EXPORT_SYMBOL(iwl_bss_info_changed);
-
-static int iwl_set_mode(struct iwl_priv *priv, struct ieee80211_vif *vif)
-{
-	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
-
-	iwl_connection_init_rx_config(priv, ctx);
-
-	if (priv->cfg->ops->hcmd->set_rxon_chain)
-		priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-
-	return iwlcore_commit_rxon(priv, ctx);
+	return 0;
 }
 
 int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
@@ -1771,7 +1402,7 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 	struct iwl_priv *priv = hw->priv;
 	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
 	struct iwl_rxon_context *tmp, *ctx = NULL;
-	int err = 0;
+	int err;
 
 	IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n",
 			   vif->type, vif->addr);
@@ -1813,36 +1444,11 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 
 	vif_priv->ctx = ctx;
 	ctx->vif = vif;
-	/*
-	 * This variable will be correct only when there's just
-	 * a single context, but all code using it is for hardware
-	 * that supports only one context.
-	 */
-	priv->iw_mode = vif->type;
-
-	ctx->is_active = true;
 
-	err = iwl_set_mode(priv, vif);
-	if (err) {
-		if (!ctx->always_active)
-			ctx->is_active = false;
-		goto out_err;
-	}
-
-	if (priv->cfg->bt_params &&
-	    priv->cfg->bt_params->advanced_bt_coexist &&
-	    vif->type == NL80211_IFTYPE_ADHOC) {
-		/*
-		 * pretend to have high BT traffic as long as we
-		 * are operating in IBSS mode, as this will cause
-		 * the rate scaling etc. to behave as intended.
-		 */
-		priv->bt_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
-	}
-
-	goto out;
+	err = iwl_setup_interface(priv, ctx);
+	if (!err)
+		goto out;
 
- out_err:
 	ctx->vif = NULL;
 	priv->iw_mode = NL80211_IFTYPE_STATION;
  out:
@@ -1853,27 +1459,24 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 }
 EXPORT_SYMBOL(iwl_mac_add_interface);
 
-void iwl_mac_remove_interface(struct ieee80211_hw *hw,
-			      struct ieee80211_vif *vif)
+static void iwl_teardown_interface(struct iwl_priv *priv,
+				   struct ieee80211_vif *vif,
+				   bool mode_change)
 {
-	struct iwl_priv *priv = hw->priv;
 	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
 
-	IWL_DEBUG_MAC80211(priv, "enter\n");
-
-	mutex_lock(&priv->mutex);
-
-	WARN_ON(ctx->vif != vif);
-	ctx->vif = NULL;
+	lockdep_assert_held(&priv->mutex);
 
 	if (priv->scan_vif == vif) {
 		iwl_scan_cancel_timeout(priv, 200);
 		iwl_force_scan_end(priv);
 	}
-	iwl_set_mode(priv, vif);
 
-	if (!ctx->always_active)
-		ctx->is_active = false;
+	if (!mode_change) {
+		iwl_set_mode(priv, ctx);
+		if (!ctx->always_active)
+			ctx->is_active = false;
+	}
 
 	/*
 	 * When removing the IBSS interface, overwrite the
@@ -1883,211 +1486,31 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 	 * both values are the same and zero.
 	 */
 	if (vif->type == NL80211_IFTYPE_ADHOC)
-		priv->bt_traffic_load = priv->notif_bt_traffic_load;
-
-	memset(priv->bssid, 0, ETH_ALEN);
-	mutex_unlock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-
-}
-EXPORT_SYMBOL(iwl_mac_remove_interface);
-
-/**
- * iwl_mac_config - mac80211 config callback
- */
-int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
-	struct iwl_priv *priv = hw->priv;
-	const struct iwl_channel_info *ch_info;
-	struct ieee80211_conf *conf = &hw->conf;
-	struct ieee80211_channel *channel = conf->channel;
-	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
-	struct iwl_rxon_context *ctx;
-	unsigned long flags = 0;
-	int ret = 0;
-	u16 ch;
-	int scan_active = 0;
-
-	mutex_lock(&priv->mutex);
-
-	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
-					channel->hw_value, changed);
-
-	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
-			test_bit(STATUS_SCANNING, &priv->status))) {
-		scan_active = 1;
-		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
-	}
-
-	if (changed & (IEEE80211_CONF_CHANGE_SMPS |
-		       IEEE80211_CONF_CHANGE_CHANNEL)) {
-		/* mac80211 uses static for non-HT which is what we want */
-		priv->current_ht_config.smps = conf->smps_mode;
-
-		/*
-		 * Recalculate chain counts.
-		 *
-		 * If monitor mode is enabled then mac80211 will
-		 * set up the SM PS mode to OFF if an HT channel is
-		 * configured.
-		 */
-		if (priv->cfg->ops->hcmd->set_rxon_chain)
-			for_each_context(priv, ctx)
-				priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
-	}
-
-	/* during scanning mac80211 will delay channel setting until
-	 * scan finish with changed = 0
-	 */
-	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
-		if (scan_active)
-			goto set_ch_out;
-
-		ch = channel->hw_value;
-		ch_info = iwl_get_channel_info(priv, channel->band, ch);
-		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
-			ret = -EINVAL;
-			goto set_ch_out;
-		}
-
-		spin_lock_irqsave(&priv->lock, flags);
-
-		for_each_context(priv, ctx) {
-			/* Configure HT40 channels */
-			ctx->ht.enabled = conf_is_ht(conf);
-			if (ctx->ht.enabled) {
-				if (conf_is_ht40_minus(conf)) {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_BELOW;
-					ctx->ht.is_40mhz = true;
-				} else if (conf_is_ht40_plus(conf)) {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
-					ctx->ht.is_40mhz = true;
-				} else {
-					ctx->ht.extension_chan_offset =
-						IEEE80211_HT_PARAM_CHA_SEC_NONE;
-					ctx->ht.is_40mhz = false;
-				}
-			} else
-				ctx->ht.is_40mhz = false;
-
-			/*
-			 * Default to no protection. Protection mode will
-			 * later be set from BSS config in iwl_ht_conf
-			 */
-			ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
-
-			/* if we are switching from ht to 2.4 clear flags
-			 * from any ht related info since 2.4 does not
-			 * support ht */
-			if ((le16_to_cpu(ctx->staging.channel) != ch))
-				ctx->staging.flags = 0;
-
-			iwl_set_rxon_channel(priv, channel, ctx);
-			iwl_set_rxon_ht(priv, ht_conf);
-
-			iwl_set_flags_for_band(priv, ctx, channel->band,
-					       ctx->vif);
-		}
-
-		spin_unlock_irqrestore(&priv->lock, flags);
-
-		if (priv->cfg->ops->lib->update_bcast_stations)
-			ret = priv->cfg->ops->lib->update_bcast_stations(priv);
-
- set_ch_out:
-		/* The list of supported rates and rate mask can be different
-		 * for each band; since the band may have changed, reset
-		 * the rate mask to what mac80211 lists */
-		iwl_set_rate(priv);
-	}
-
-	if (changed & (IEEE80211_CONF_CHANGE_PS |
-			IEEE80211_CONF_CHANGE_IDLE)) {
-		ret = iwl_power_update_mode(priv, false);
-		if (ret)
-			IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
-	}
-
-	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
-			priv->tx_power_user_lmt, conf->power_level);
-
-		iwl_set_tx_power(priv, conf->power_level, false);
-	}
-
-	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		goto out;
-	}
-
-	if (scan_active)
-		goto out;
-
-	for_each_context(priv, ctx) {
-		if (memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)))
-			iwlcore_commit_rxon(priv, ctx);
-		else
-			IWL_DEBUG_INFO(priv,
-				"Not re-sending same RXON configuration.\n");
-	}
-
-out:
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	mutex_unlock(&priv->mutex);
-	return ret;
+		priv->bt_traffic_load = priv->last_bt_traffic_load;
 }
-EXPORT_SYMBOL(iwl_mac_config);
 
-void iwl_mac_reset_tsf(struct ieee80211_hw *hw)
+void iwl_mac_remove_interface(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif)
 {
 	struct iwl_priv *priv = hw->priv;
-	unsigned long flags;
-	/* IBSS can only be the IWL_RXON_CTX_BSS context */
-	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
 
-	mutex_lock(&priv->mutex);
 	IWL_DEBUG_MAC80211(priv, "enter\n");
 
-	spin_lock_irqsave(&priv->lock, flags);
-	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_config));
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* new association get rid of ibss beacon skb */
-	if (priv->beacon_skb)
-		dev_kfree_skb(priv->beacon_skb);
-
-	priv->beacon_skb = NULL;
-
-	priv->timestamp = 0;
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
-	iwl_scan_cancel_timeout(priv, 100);
-	if (!iwl_is_ready_rf(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		mutex_unlock(&priv->mutex);
-		return;
-	}
+	mutex_lock(&priv->mutex);
 
-	/* we are restarting association process
-	 * clear RXON_FILTER_ASSOC_MSK bit
-	 */
-	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-	iwlcore_commit_rxon(priv, ctx);
+	WARN_ON(ctx->vif != vif);
+	ctx->vif = NULL;
 
-	iwl_set_rate(priv);
+	iwl_teardown_interface(priv, vif, false);
 
+	memset(priv->bssid, 0, ETH_ALEN);
 	mutex_unlock(&priv->mutex);
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
+
 }
-EXPORT_SYMBOL(iwl_mac_reset_tsf);
+EXPORT_SYMBOL(iwl_mac_remove_interface);
 
 int iwl_alloc_txq_mem(struct iwl_priv *priv)
 {
@@ -2431,77 +1854,115 @@ int iwl_force_reset(struct iwl_priv *priv, int mode, bool external)
 	return 0;
 }
 
-/**
- * iwl_bg_monitor_recover - Timer callback to check for stuck queue and recover
- *
- * During normal condition (no queue is stuck), the timer is continually set to
- * execute every monitor_recover_period milliseconds after the last timer
- * expired.  When the queue read_ptr is at the same place, the timer is
- * shorten to 100mSecs.  This is
- *      1) to reduce the chance that the read_ptr may wrap around (not stuck)
- *      2) to detect the stuck queues quicker before the station and AP can
- *      disassociate each other.
- *
- * This function monitors all the tx queues and recover from it if any
- * of the queues are stuck.
- * 1. It first check the cmd queue for stuck conditions.  If it is stuck,
- *      it will recover by resetting the firmware and return.
- * 2. Then, it checks for station association.  If it associates it will check
- *      other queues.  If any queue is stuck, it will recover by resetting
- *      the firmware.
- * Note: It the number of times the queue read_ptr to be at the same place to
- *      be MAX_REPEAT+1 in order to consider to be stuck.
- */
+int iwl_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+			     enum nl80211_iftype newtype, bool newp2p)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+	struct iwl_rxon_context *tmp;
+	u32 interface_modes;
+	int err;
+
+	newtype = ieee80211_iftype_p2p(newtype, newp2p);
+
+	mutex_lock(&priv->mutex);
+
+	interface_modes = ctx->interface_modes | ctx->exclusive_interface_modes;
+
+	if (!(interface_modes & BIT(newtype))) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	if (ctx->exclusive_interface_modes & BIT(newtype)) {
+		for_each_context(priv, tmp) {
+			if (ctx == tmp)
+				continue;
+
+			if (!tmp->vif)
+				continue;
+
+			/*
+			 * The current mode switch would be exclusive, but
+			 * another context is active ... refuse the switch.
+			 */
+			err = -EBUSY;
+			goto out;
+		}
+	}
+
+	/* success */
+	iwl_teardown_interface(priv, vif, true);
+	vif->type = newtype;
+	err = iwl_setup_interface(priv, ctx);
+	WARN_ON(err);
+	/*
+	 * We've switched internally, but submitting to the
+	 * device may have failed for some reason. Mask this
+	 * error, because otherwise mac80211 will not switch
+	 * (and set the interface type back) and we'll be
+	 * out of sync with it.
+	 */
+	err = 0;
+
+ out:
+	mutex_unlock(&priv->mutex);
+	return err;
+}
+EXPORT_SYMBOL(iwl_mac_change_interface);
+
 /*
- * The maximum number of times the read pointer of the tx queue at the
- * same place without considering to be stuck.
+ * On every watchdog tick we check (latest) time stamp. If it does not
+ * change during timeout period and queue is not empty we reset firmware.
  */
-#define MAX_REPEAT      (2)
 static int iwl_check_stuck_queue(struct iwl_priv *priv, int cnt)
 {
-	struct iwl_tx_queue *txq;
-	struct iwl_queue *q;
+	struct iwl_tx_queue *txq = &priv->txq[cnt];
+	struct iwl_queue *q = &txq->q;
+	unsigned long timeout;
+	int ret;
 
-	txq = &priv->txq[cnt];
-	q = &txq->q;
-	/* queue is empty, skip */
-	if (q->read_ptr == q->write_ptr)
+	if (q->read_ptr == q->write_ptr) {
+		txq->time_stamp = jiffies;
 		return 0;
+	}
 
-	if (q->read_ptr == q->last_read_ptr) {
-		/* a queue has not been read from last time */
-		if (q->repeat_same_read_ptr > MAX_REPEAT) {
-			IWL_ERR(priv,
-				"queue %d stuck %d time. Fw reload.\n",
-				q->id, q->repeat_same_read_ptr);
-			q->repeat_same_read_ptr = 0;
-			iwl_force_reset(priv, IWL_FW_RESET, false);
-		} else {
-			q->repeat_same_read_ptr++;
-			IWL_DEBUG_RADIO(priv,
-					"queue %d, not read %d time\n",
-					q->id,
-					q->repeat_same_read_ptr);
-			mod_timer(&priv->monitor_recover,
-				jiffies + msecs_to_jiffies(
-				IWL_ONE_HUNDRED_MSECS));
-			return 1;
-		}
-	} else {
-		q->last_read_ptr = q->read_ptr;
-		q->repeat_same_read_ptr = 0;
+	timeout = txq->time_stamp +
+		  msecs_to_jiffies(priv->cfg->base_params->wd_timeout);
+
+	if (time_after(jiffies, timeout)) {
+		IWL_ERR(priv, "Queue %d stuck for %u ms.\n",
+				q->id, priv->cfg->base_params->wd_timeout);
+		ret = iwl_force_reset(priv, IWL_FW_RESET, false);
+		return (ret == -EAGAIN) ? 0 : 1;
 	}
+
 	return 0;
 }
 
-void iwl_bg_monitor_recover(unsigned long data)
+/*
+ * Making watchdog tick be a quarter of timeout assure we will
+ * discover the queue hung between timeout and 1.25*timeout
+ */
+#define IWL_WD_TICK(timeout) ((timeout) / 4)
+
+/*
+ * Watchdog timer callback, we check each tx queue for stuck, if if hung
+ * we reset the firmware. If everything is fine just rearm the timer.
+ */
+void iwl_bg_watchdog(unsigned long data)
 {
 	struct iwl_priv *priv = (struct iwl_priv *)data;
 	int cnt;
+	unsigned long timeout;
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
+	timeout = priv->cfg->base_params->wd_timeout;
+	if (timeout == 0)
+		return;
+
 	/* monitor and check for stuck cmd queue */
 	if (iwl_check_stuck_queue(priv, priv->cmd_queue))
 		return;
@@ -2516,17 +1977,23 @@ void iwl_bg_monitor_recover(unsigned long data)
 				return;
 		}
 	}
-	if (priv->cfg->base_params->monitor_recover_period) {
-		/*
-		 * Reschedule the timer to occur in
-		 * priv->cfg->base_params->monitor_recover_period
-		 */
-		mod_timer(&priv->monitor_recover, jiffies + msecs_to_jiffies(
-			  priv->cfg->base_params->monitor_recover_period));
-	}
+
+	mod_timer(&priv->watchdog, jiffies +
+		  msecs_to_jiffies(IWL_WD_TICK(timeout)));
 }
-EXPORT_SYMBOL(iwl_bg_monitor_recover);
+EXPORT_SYMBOL(iwl_bg_watchdog);
+
+void iwl_setup_watchdog(struct iwl_priv *priv)
+{
+	unsigned int timeout = priv->cfg->base_params->wd_timeout;
 
+	if (timeout)
+		mod_timer(&priv->watchdog,
+			  jiffies + msecs_to_jiffies(IWL_WD_TICK(timeout)));
+	else
+		del_timer(&priv->watchdog);
+}
+EXPORT_SYMBOL(iwl_setup_watchdog);
 
 /*
  * extended beacon time format
@@ -2584,8 +2051,9 @@ EXPORT_SYMBOL(iwl_add_beacon_time);
 
 #ifdef CONFIG_PM
 
-int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+int iwl_pci_suspend(struct device *device)
 {
+	struct pci_dev *pdev = to_pci_dev(device);
 	struct iwl_priv *priv = pci_get_drvdata(pdev);
 
 	/*
@@ -2597,18 +2065,14 @@ int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	 */
 	iwl_apm_stop(priv);
 
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
 	return 0;
 }
 EXPORT_SYMBOL(iwl_pci_suspend);
 
-int iwl_pci_resume(struct pci_dev *pdev)
+int iwl_pci_resume(struct device *device)
 {
+	struct pci_dev *pdev = to_pci_dev(device);
 	struct iwl_priv *priv = pci_get_drvdata(pdev);
-	int ret;
 	bool hw_rfkill = false;
 
 	/*
@@ -2617,11 +2081,6 @@ int iwl_pci_resume(struct pci_dev *pdev)
 	 */
 	pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
 
-	pci_set_power_state(pdev, PCI_D0);
-	ret = pci_enable_device(pdev);
-	if (ret)
-		return ret;
-	pci_restore_state(pdev);
 	iwl_enable_interrupts(priv);
 
 	if (!(iwl_read32(priv, CSR_GP_CNTRL) &
@@ -2639,4 +2098,14 @@ int iwl_pci_resume(struct pci_dev *pdev)
 }
 EXPORT_SYMBOL(iwl_pci_resume);
 
+const struct dev_pm_ops iwl_pm_ops = {
+	.suspend = iwl_pci_suspend,
+	.resume = iwl_pci_resume,
+	.freeze = iwl_pci_suspend,
+	.thaw = iwl_pci_resume,
+	.poweroff = iwl_pci_suspend,
+	.restore = iwl_pci_resume,
+};
+EXPORT_SYMBOL(iwl_pm_ops);
+
 #endif /* CONFIG_PM */
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 64527def059..a3474376fdb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -120,6 +120,14 @@ struct iwl_apm_ops {
 	void (*config)(struct iwl_priv *priv);
 };
 
+struct iwl_isr_ops {
+	irqreturn_t (*isr) (int irq, void *data);
+	void (*free)(struct iwl_priv *priv);
+	int (*alloc)(struct iwl_priv *priv);
+	int (*reset)(struct iwl_priv *priv);
+	void (*disable)(struct iwl_priv *priv);
+};
+
 struct iwl_debugfs_ops {
 	ssize_t (*rx_stats_read)(struct file *file, char __user *user_buf,
 				 size_t count, loff_t *ppos);
@@ -193,22 +201,15 @@ struct iwl_lib_ops {
 	/* power */
 	int (*send_tx_power) (struct iwl_priv *priv);
 	void (*update_chain_flags)(struct iwl_priv *priv);
-	void (*post_associate)(struct iwl_priv *priv,
-			       struct ieee80211_vif *vif);
-	void (*config_ap)(struct iwl_priv *priv, struct ieee80211_vif *vif);
-	irqreturn_t (*isr) (int irq, void *data);
+
+	/* isr */
+	struct iwl_isr_ops isr_ops;
 
 	/* eeprom operations (as defined in iwl-eeprom.h) */
 	struct iwl_eeprom_ops eeprom_ops;
 
 	/* temperature */
 	struct iwl_temp_ops temp_ops;
-	/* station management */
-	int (*manage_ibss_station)(struct iwl_priv *priv,
-				   struct ieee80211_vif *vif, bool add);
-	int (*update_bcast_stations)(struct iwl_priv *priv);
-	/* recover from tx queue stall */
-	void (*recover_from_tx_stall)(unsigned long data);
 	/* check for plcp health */
 	bool (*check_plcp_health)(struct iwl_priv *priv,
 					struct iwl_rx_packet *pkt);
@@ -235,12 +236,23 @@ struct iwl_nic_ops {
 	void (*additional_nic_config)(struct iwl_priv *priv);
 };
 
+struct iwl_legacy_ops {
+	void (*post_associate)(struct iwl_priv *priv);
+	void (*config_ap)(struct iwl_priv *priv);
+	/* station management */
+	int (*update_bcast_stations)(struct iwl_priv *priv);
+	int (*manage_ibss_station)(struct iwl_priv *priv,
+				   struct ieee80211_vif *vif, bool add);
+};
+
 struct iwl_ops {
 	const struct iwl_lib_ops *lib;
 	const struct iwl_hcmd_ops *hcmd;
 	const struct iwl_hcmd_utils_ops *utils;
 	const struct iwl_led_ops *led;
 	const struct iwl_nic_ops *nic;
+	const struct iwl_legacy_ops *legacy;
+	const struct ieee80211_ops *ieee80211_ops;
 };
 
 struct iwl_mod_params {
@@ -266,7 +278,7 @@ struct iwl_mod_params {
  * @plcp_delta_threshold: plcp error rate threshold used to trigger
  *	radio tuning when there is a high receiving plcp error rate
  * @chain_noise_scale: default chain noise scale used for gain computation
- * @monitor_recover_period: default timer used to check stuck queues
+ * @wd_timeout: TX queues watchdog timeout
  * @temperature_kelvin: temperature report by uCode in kelvin
  * @max_event_log_size: size of event log buffer size for ucode event logging
  * @tx_power_by_driver: tx power calibration performed by driver
@@ -276,7 +288,10 @@ struct iwl_mod_params {
  *	sensitivity calibration operation
  * @chain_noise_calib_by_driver: driver has the capability to perform
  *	chain noise calibration operation
-*/
+ * @shadow_reg_enable: HW shadhow register bit
+ * @no_agg_framecnt_info: uCode do not provide aggregation frame count
+ *	information
+ */
 struct iwl_base_params {
 	int eeprom_size;
 	int num_of_queues;	/* def: HW dependent */
@@ -298,14 +313,15 @@ struct iwl_base_params {
 	const bool support_wimax_coexist;
 	u8 plcp_delta_threshold;
 	s32 chain_noise_scale;
-	/* timer period for monitor the driver queues */
-	u32 monitor_recover_period;
+	unsigned int wd_timeout;
 	bool temperature_kelvin;
 	u32 max_event_log_size;
 	const bool tx_power_by_driver;
 	const bool ucode_tracing;
 	const bool sensitivity_calib_by_driver;
 	const bool chain_noise_calib_by_driver;
+	const bool shadow_reg_enable;
+	const bool no_agg_framecnt_info;
 };
 /*
  * @advanced_bt_coexist: support advanced bt coexist
@@ -315,6 +331,7 @@ struct iwl_base_params {
  * @agg_time_limit: maximum number of uSec in aggregation
  * @ampdu_factor: Maximum A-MPDU length factor
  * @ampdu_density: Minimum A-MPDU spacing
+ * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
 */
 struct iwl_bt_params {
 	bool advanced_bt_coexist;
@@ -324,6 +341,7 @@ struct iwl_bt_params {
 	u16 agg_time_limit;
 	u8 ampdu_factor;
 	u8 ampdu_density;
+	bool bt_sco_disable;
 };
 /*
  * @use_rts_for_aggregation: use rts/cts protection for HT traffic
@@ -344,6 +362,10 @@ struct iwl_ht_params {
  * @need_dc_calib: need to perform init dc calibration
  * @need_temp_offset_calib: need to perform temperature offset calibration
  * @scan_antennas: available antenna for scan operation
+ * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
+ * @adv_pm: advance power management
+ * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
+ * @internal_wimax_coex: internal wifi/wimax combo device
  *
  * We enable the driver to be backward compatible wrt API version. The
  * driver specifies which APIs it supports (with @ucode_api_max being the
@@ -389,15 +411,17 @@ struct iwl_cfg {
 	const bool need_dc_calib;	  /* if used set to true */
 	const bool need_temp_offset_calib; /* if used set to true */
 	u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
-	u8 scan_tx_antennas[IEEE80211_NUM_BANDS];
+	enum iwl_led_mode led_mode;
+	const bool adv_pm;
+	const bool rx_with_siso_diversity;
+	const bool internal_wimax_coex;
 };
 
 /***************************
  *   L i b                 *
  ***************************/
 
-struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
-		struct ieee80211_ops *hw_ops);
+struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg);
 int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
 		    const struct ieee80211_tx_queue_params *params);
 int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw);
@@ -425,23 +449,16 @@ int iwl_set_decrypted_flag(struct iwl_priv *priv,
 			   u32 decrypt_res,
 			   struct ieee80211_rx_status *stats);
 void iwl_irq_handle_error(struct iwl_priv *priv);
-void iwl_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif);
-void iwl_bss_info_changed(struct ieee80211_hw *hw,
-				     struct ieee80211_vif *vif,
-				     struct ieee80211_bss_conf *bss_conf,
-				     u32 changes);
 int iwl_mac_add_interface(struct ieee80211_hw *hw,
 			  struct ieee80211_vif *vif);
 void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 			      struct ieee80211_vif *vif);
-int iwl_mac_config(struct ieee80211_hw *hw, u32 changed);
-void iwl_config_ap(struct iwl_priv *priv, struct ieee80211_vif *vif);
-void iwl_mac_reset_tsf(struct ieee80211_hw *hw);
+int iwl_mac_change_interface(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     enum nl80211_iftype newtype, bool newp2p);
 int iwl_alloc_txq_mem(struct iwl_priv *priv);
 void iwl_free_txq_mem(struct iwl_priv *priv);
-void iwlcore_tx_cmd_protection(struct iwl_priv *priv,
-			       struct ieee80211_tx_info *info,
-			       __le16 fc, __le32 *tx_flags);
+
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 int iwl_alloc_traffic_mem(struct iwl_priv *priv);
 void iwl_free_traffic_mem(struct iwl_priv *priv);
@@ -529,6 +546,7 @@ int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 void iwl_tx_queue_reset(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 			int slots_num, u32 txq_id);
 void iwl_tx_queue_free(struct iwl_priv *priv, int txq_id);
+void iwl_setup_watchdog(struct iwl_priv *priv);
 /*****************************************************
  * TX power
  ****************************************************/
@@ -598,7 +616,6 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
 /*****************************************************
  * PCI						     *
  *****************************************************/
-irqreturn_t iwl_isr_legacy(int irq, void *data);
 
 static inline u16 iwl_pcie_link_ctl(struct iwl_priv *priv)
 {
@@ -609,15 +626,23 @@ static inline u16 iwl_pcie_link_ctl(struct iwl_priv *priv)
 	return pci_lnk_ctl;
 }
 
-void iwl_bg_monitor_recover(unsigned long data);
+void iwl_bg_watchdog(unsigned long data);
 u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval);
 __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
 			   u32 addon, u32 beacon_interval);
 
 #ifdef CONFIG_PM
-int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state);
-int iwl_pci_resume(struct pci_dev *pdev);
-#endif /* CONFIG_PM */
+int iwl_pci_suspend(struct device *device);
+int iwl_pci_resume(struct device *device);
+extern const struct dev_pm_ops iwl_pm_ops;
+
+#define IWL_PM_OPS	(&iwl_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define IWL_PM_OPS	NULL
+
+#endif /* !CONFIG_PM */
 
 /*****************************************************
 *  Error Handling Debugging
@@ -724,11 +749,6 @@ static inline int iwlcore_commit_rxon(struct iwl_priv *priv,
 {
 	return priv->cfg->ops->hcmd->commit_rxon(priv, ctx);
 }
-static inline void iwlcore_config_ap(struct iwl_priv *priv,
-				     struct ieee80211_vif *vif)
-{
-	priv->cfg->ops->lib->config_ap(priv, vif);
-}
 static inline const struct ieee80211_supported_band *iwl_get_hw_mode(
 			struct iwl_priv *priv, enum ieee80211_band band)
 {
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 2aa15ab1389..b80bf7dff55 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -132,6 +132,8 @@
 
 #define CSR_LED_REG             (CSR_BASE+0x094)
 #define CSR_DRAM_INT_TBL_REG	(CSR_BASE+0x0A0)
+#define CSR_MAC_SHADOW_REG_CTRL	(CSR_BASE+0x0A8) /* 6000 and up */
+
 
 /* GIO Chicken Bits (PCI Express bus link power management) */
 #define CSR_GIO_CHICKEN_BITS    (CSR_BASE+0x100)
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index 0b961a353ff..ebdea3be3ef 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -120,6 +120,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
 /* 0x000000F0 - 0x00000010 */
 #define IWL_DL_MACDUMP		(1 << 4)
 #define IWL_DL_HCMD_DUMP	(1 << 5)
+#define IWL_DL_EEPROM		(1 << 6)
 #define IWL_DL_RADIO		(1 << 7)
 /* 0x00000F00 - 0x00000100 */
 #define IWL_DL_POWER		(1 << 8)
@@ -164,6 +165,7 @@ static inline void iwl_dbgfs_unregister(struct iwl_priv *priv)
 #define IWL_DEBUG_WEP(p, f, a...)	IWL_DEBUG(p, IWL_DL_WEP, f, ## a)
 #define IWL_DEBUG_HC(p, f, a...)	IWL_DEBUG(p, IWL_DL_HCMD, f, ## a)
 #define IWL_DEBUG_HC_DUMP(p, f, a...)	IWL_DEBUG(p, IWL_DL_HCMD_DUMP, f, ## a)
+#define IWL_DEBUG_EEPROM(p, f, a...)	IWL_DEBUG(p, IWL_DL_EEPROM, f, ## a)
 #define IWL_DEBUG_CALIB(p, f, a...)	IWL_DEBUG(p, IWL_DL_CALIB, f, ## a)
 #define IWL_DEBUG_FW(p, f, a...)	IWL_DEBUG(p, IWL_DL_FW, f, ## a)
 #define IWL_DEBUG_RF_KILL(p, f, a...)	IWL_DEBUG(p, IWL_DL_RF_KILL, f, ## a)
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index 8fdd4efdb1d..6fe80b5e7a1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -992,11 +992,8 @@ static ssize_t iwl_dbgfs_tx_queue_read(struct file *file,
 				" swq_id=%#.2x (ac %d/hwq %d)\n",
 				cnt, q->read_ptr, q->write_ptr,
 				!!test_bit(cnt, priv->queue_stopped),
-				txq->swq_id,
-				txq->swq_id & 0x80 ? txq->swq_id & 3 :
-				txq->swq_id,
-				txq->swq_id & 0x80 ? (txq->swq_id >> 2) &
-				0x1f : txq->swq_id);
+				txq->swq_id, txq->swq_id & 3,
+				(txq->swq_id >> 2) & 0x1f);
 		if (cnt >= 4)
 			continue;
 		/* for the ACs, display the stop count too */
@@ -1537,32 +1534,26 @@ static ssize_t iwl_dbgfs_ucode_bt_stats_read(struct file *file,
 			user_buf, count, ppos);
 }
 
-static ssize_t iwl_dbgfs_monitor_period_write(struct file *file,
+static ssize_t iwl_dbgfs_wd_timeout_write(struct file *file,
 					const char __user *user_buf,
 					size_t count, loff_t *ppos) {
 
 	struct iwl_priv *priv = file->private_data;
 	char buf[8];
 	int buf_size;
-	int period;
+	int timeout;
 
 	memset(buf, 0, sizeof(buf));
 	buf_size = min(count, sizeof(buf) -  1);
 	if (copy_from_user(buf, user_buf, buf_size))
 		return -EFAULT;
-	if (sscanf(buf, "%d", &period) != 1)
+	if (sscanf(buf, "%d", &timeout) != 1)
 		return -EINVAL;
-	if (period < 0 || period > IWL_MAX_MONITORING_PERIOD)
-		priv->cfg->base_params->monitor_recover_period =
-			IWL_DEF_MONITORING_PERIOD;
-	else
-		priv->cfg->base_params->monitor_recover_period = period;
+	if (timeout < 0 || timeout > IWL_MAX_WD_TIMEOUT)
+		timeout = IWL_DEF_WD_TIMEOUT;
 
-	if (priv->cfg->base_params->monitor_recover_period)
-		mod_timer(&priv->monitor_recover, jiffies + msecs_to_jiffies(
-			  priv->cfg->base_params->monitor_recover_period));
-	else
-		del_timer_sync(&priv->monitor_recover);
+	priv->cfg->base_params->wd_timeout = timeout;
+	iwl_setup_watchdog(priv);
 	return count;
 }
 
@@ -1576,11 +1567,18 @@ static ssize_t iwl_dbgfs_bt_traffic_read(struct file *file,
 	const size_t bufsz = sizeof(buf);
 	ssize_t ret;
 
+	if (!priv->bt_enable_flag) {
+		pos += scnprintf(buf + pos, bufsz - pos, "BT coex disabled\n");
+		ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+		return ret;
+	}
+	pos += scnprintf(buf + pos, bufsz - pos, "BT enable flag: 0x%x\n",
+		priv->bt_enable_flag);
 	pos += scnprintf(buf + pos, bufsz - pos, "BT in %s mode\n",
 		priv->bt_full_concurrent ? "full concurrency" : "3-wire");
 	pos += scnprintf(buf + pos, bufsz - pos, "BT status: %s, "
 			 "last traffic notif: %d\n",
-		priv->bt_status ? "On" : "Off", priv->notif_bt_traffic_load);
+		priv->bt_status ? "On" : "Off", priv->last_bt_traffic_load);
 	pos += scnprintf(buf + pos, bufsz - pos, "ch_announcement: %d, "
 			 "sco_active: %d, kill_ack_mask: %x, "
 			 "kill_cts_mask: %x\n",
@@ -1689,7 +1687,7 @@ DEBUGFS_READ_FILE_OPS(rxon_flags);
 DEBUGFS_READ_FILE_OPS(rxon_filter_flags);
 DEBUGFS_WRITE_FILE_OPS(txfifo_flush);
 DEBUGFS_READ_FILE_OPS(ucode_bt_stats);
-DEBUGFS_WRITE_FILE_OPS(monitor_period);
+DEBUGFS_WRITE_FILE_OPS(wd_timeout);
 DEBUGFS_READ_FILE_OPS(bt_traffic);
 DEBUGFS_READ_WRITE_FILE_OPS(protection_mode);
 DEBUGFS_READ_FILE_OPS(reply_tx_error);
@@ -1766,7 +1764,7 @@ int iwl_dbgfs_register(struct iwl_priv *priv, const char *name)
 	DEBUGFS_ADD_FILE(reply_tx_error, dir_debug, S_IRUSR);
 	DEBUGFS_ADD_FILE(rxon_flags, dir_debug, S_IWUSR);
 	DEBUGFS_ADD_FILE(rxon_filter_flags, dir_debug, S_IWUSR);
-	DEBUGFS_ADD_FILE(monitor_period, dir_debug, S_IWUSR);
+	DEBUGFS_ADD_FILE(wd_timeout, dir_debug, S_IWUSR);
 	if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist)
 		DEBUGFS_ADD_FILE(bt_traffic, dir_debug, S_IRUSR);
 	if (priv->cfg->base_params->sensitivity_calib_by_driver)
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 70e07fa4840..8dda67850af 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -129,9 +129,6 @@ struct iwl_queue {
 	int write_ptr;       /* 1-st empty entry (index) host_w*/
 	int read_ptr;         /* last used entry (index) host_r*/
 	/* use for monitoring and recovering the stuck queue */
-	int last_read_ptr;      /* storing the last read_ptr */
-	/* number of time read_ptr and last_read_ptr are the same */
-	u8 repeat_same_read_ptr;
 	dma_addr_t dma_addr;   /* physical addr for BD's */
 	int n_window;	       /* safe queue window */
 	u32 id;
@@ -155,6 +152,7 @@ struct iwl_tx_info {
  * @meta: array of meta data for each command/tx buffer
  * @dma_addr_cmd: physical address of cmd/tx buffer array
  * @txb: array of per-TFD driver data
+ * @time_stamp: time (in jiffies) of last read_ptr change
  * @need_update: indicates need to update read/write index
  * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
  *
@@ -170,6 +168,7 @@ struct iwl_tx_queue {
 	struct iwl_device_cmd **cmd;
 	struct iwl_cmd_meta *meta;
 	struct iwl_tx_info *txb;
+	unsigned long time_stamp;
 	u8 need_update;
 	u8 sched_retry;
 	u8 active;
@@ -1104,11 +1103,10 @@ struct iwl_event_log {
 #define IWL_DELAY_NEXT_FORCE_RF_RESET  (HZ*3)
 #define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
 
-/* timer constants use to monitor and recover stuck tx queues in mSecs */
-#define IWL_DEF_MONITORING_PERIOD	(1000)
-#define IWL_LONG_MONITORING_PERIOD	(5000)
-#define IWL_ONE_HUNDRED_MSECS   (100)
-#define IWL_MAX_MONITORING_PERIOD	(60000)
+/* TX queue watchdog timeouts in mSecs */
+#define IWL_DEF_WD_TIMEOUT	(2000)
+#define IWL_LONG_WD_TIMEOUT	(10000)
+#define IWL_MAX_WD_TIMEOUT	(120000)
 
 /* BT Antenna Coupling Threshold (dB) */
 #define IWL_BT_ANTENNA_COUPLING_THRESHOLD	(35)
@@ -1162,6 +1160,8 @@ struct iwl_rxon_context {
 	 */
 	bool always_active, is_active;
 
+	bool ht_need_multiple_chains;
+
 	enum iwl_rxon_context_id ctxid;
 
 	u32 interface_modes, exclusive_interface_modes;
@@ -1468,8 +1468,9 @@ struct iwl_priv {
 	};
 
 	/* bt coex */
+	u8 bt_enable_flag;
 	u8 bt_status;
-	u8 bt_traffic_load, notif_bt_traffic_load;
+	u8 bt_traffic_load, last_bt_traffic_load;
 	bool bt_ch_announce;
 	bool bt_sco_active;
 	bool bt_full_concurrent;
@@ -1480,7 +1481,6 @@ struct iwl_priv {
 	u16 bt_on_thresh;
 	u16 bt_duration;
 	u16 dynamic_frag_thresh;
-	u16 dynamic_agg_thresh;
 	u8 bt_ci_compliance;
 	struct work_struct bt_traffic_change_work;
 
@@ -1517,6 +1517,7 @@ struct iwl_priv {
 	s8 tx_power_user_lmt;
 	s8 tx_power_device_lmt;
 	s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
+	s8 tx_power_next;
 
 
 #ifdef CONFIG_IWLWIFI_DEBUG
@@ -1542,7 +1543,7 @@ struct iwl_priv {
 	struct work_struct run_time_calib_work;
 	struct timer_list statistics_periodic;
 	struct timer_list ucode_trace;
-	struct timer_list monitor_recover;
+	struct timer_list watchdog;
 	bool hw_ready;
 
 	struct iwl_event_log event_log;
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 87cd10ff285..358cfd7e5af 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -147,7 +147,7 @@ static int iwl_eeprom_verify_signature(struct iwl_priv *priv)
 	u32 gp = iwl_read32(priv, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
 	int ret = 0;
 
-	IWL_DEBUG_INFO(priv, "EEPROM signature=0x%08x\n", gp);
+	IWL_DEBUG_EEPROM(priv, "EEPROM signature=0x%08x\n", gp);
 	switch (gp) {
 	case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
 		if (priv->nvm_device_type != NVM_DEVICE_TYPE_OTP) {
@@ -354,7 +354,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
 		 */
 		valid_addr = next_link_addr;
 		next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
-		IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
+		IWL_DEBUG_EEPROM(priv, "OTP blocks %d addr 0x%x\n",
 			       usedblocks, next_link_addr);
 		if (iwl_read_otp_word(priv, next_link_addr, &link_value))
 			return -EINVAL;
@@ -374,7 +374,7 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
 	} while (usedblocks <= priv->cfg->base_params->max_ll_items);
 
 	/* OTP has no valid blocks */
-	IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n");
+	IWL_DEBUG_EEPROM(priv, "OTP has no valid blocks\n");
 	return -EINVAL;
 }
 
@@ -414,7 +414,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		return -ENOENT;
 	/* allocate eeprom */
 	sz = priv->cfg->base_params->eeprom_size;
-	IWL_DEBUG_INFO(priv, "NVM size = %d\n", sz);
+	IWL_DEBUG_EEPROM(priv, "NVM size = %d\n", sz);
 	priv->eeprom = kzalloc(sz, GFP_KERNEL);
 	if (!priv->eeprom) {
 		ret = -ENOMEM;
@@ -492,7 +492,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		}
 	}
 
-	IWL_DEBUG_INFO(priv, "NVM Type: %s, version: 0x%x\n",
+	IWL_DEBUG_EEPROM(priv, "NVM Type: %s, version: 0x%x\n",
 		       (priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
 		       ? "OTP" : "EEPROM",
 		       iwl_eeprom_query16(priv, EEPROM_VERSION));
@@ -594,7 +594,7 @@ static int iwl_mod_ht40_chan_info(struct iwl_priv *priv,
 	if (!is_channel_valid(ch_info))
 		return -1;
 
-	IWL_DEBUG_INFO(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
+	IWL_DEBUG_EEPROM(priv, "HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
 			" Ad-Hoc %ssupported\n",
 			ch_info->channel,
 			is_channel_a_band(ch_info) ?
@@ -634,11 +634,11 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 	struct iwl_channel_info *ch_info;
 
 	if (priv->channel_count) {
-		IWL_DEBUG_INFO(priv, "Channel map already initialized.\n");
+		IWL_DEBUG_EEPROM(priv, "Channel map already initialized.\n");
 		return 0;
 	}
 
-	IWL_DEBUG_INFO(priv, "Initializing regulatory info from EEPROM\n");
+	IWL_DEBUG_EEPROM(priv, "Initializing regulatory info from EEPROM\n");
 
 	priv->channel_count =
 	    ARRAY_SIZE(iwl_eeprom_band_1) +
@@ -647,7 +647,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 	    ARRAY_SIZE(iwl_eeprom_band_4) +
 	    ARRAY_SIZE(iwl_eeprom_band_5);
 
-	IWL_DEBUG_INFO(priv, "Parsing data for %d channels.\n", priv->channel_count);
+	IWL_DEBUG_EEPROM(priv, "Parsing data for %d channels.\n",
+			priv->channel_count);
 
 	priv->channel_info = kzalloc(sizeof(struct iwl_channel_info) *
 				     priv->channel_count, GFP_KERNEL);
@@ -686,7 +687,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 					IEEE80211_CHAN_NO_HT40;
 
 			if (!(is_channel_valid(ch_info))) {
-				IWL_DEBUG_INFO(priv, "Ch. %d Flags %x [%sGHz] - "
+				IWL_DEBUG_EEPROM(priv,
+					       "Ch. %d Flags %x [%sGHz] - "
 					       "No traffic\n",
 					       ch_info->channel,
 					       ch_info->flags,
@@ -702,7 +704,8 @@ int iwl_init_channel_map(struct iwl_priv *priv)
 			ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
 			ch_info->min_power = 0;
 
-			IWL_DEBUG_INFO(priv, "Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm):"
+			IWL_DEBUG_EEPROM(priv, "Ch. %d [%sGHz] "
+				       "%s%s%s%s%s%s(0x%02x %ddBm):"
 				       " Ad-Hoc %ssupported\n",
 				       ch_info->channel,
 				       is_channel_a_band(ch_info) ?
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index d9b590625ae..9e6f31355ee 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -110,9 +110,18 @@ enum {
 };
 
 /* SKU Capabilities */
+/* 3945 only */
 #define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE                (1 << 0)
 #define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE                (1 << 1)
 
+/* 5000 and up */
+#define EEPROM_SKU_CAP_BAND_POS				(4)
+#define EEPROM_SKU_CAP_BAND_SELECTION	                \
+		(3 << EEPROM_SKU_CAP_BAND_POS)
+#define EEPROM_SKU_CAP_11N_ENABLE	                (1 << 6)
+#define EEPROM_SKU_CAP_AMT_ENABLE	                (1 << 7)
+#define EEPROM_SKU_CAP_IPAN_ENABLE	                (1 << 8)
+
 /* *regulatory* channel data format in eeprom, one for each channel.
  * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */
 struct iwl_eeprom_channel {
@@ -120,6 +129,17 @@ struct iwl_eeprom_channel {
 	s8 max_power_avg;	/* max power (dBm) on this chnl, limit 31 */
 } __packed;
 
+enum iwl_eeprom_enhanced_txpwr_flags {
+	IWL_EEPROM_ENH_TXP_FL_VALID		= BIT(0),
+	IWL_EEPROM_ENH_TXP_FL_BAND_52G		= BIT(1),
+	IWL_EEPROM_ENH_TXP_FL_OFDM		= BIT(2),
+	IWL_EEPROM_ENH_TXP_FL_40MHZ		= BIT(3),
+	IWL_EEPROM_ENH_TXP_FL_HT_AP		= BIT(4),
+	IWL_EEPROM_ENH_TXP_FL_RES1		= BIT(5),
+	IWL_EEPROM_ENH_TXP_FL_RES2		= BIT(6),
+	IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE	= BIT(7),
+};
+
 /**
  * iwl_eeprom_enhanced_txpwr structure
  *    This structure presents the enhanced regulatory tx power limit layout
@@ -127,21 +147,23 @@ struct iwl_eeprom_channel {
  *    Enhanced regulatory tx power portion of eeprom image can be broken down
  *    into individual structures; each one is 8 bytes in size and contain the
  *    following information
- * @common: (desc + channel) not used by driver, should _NOT_ be "zero"
+ * @flags: entry flags
+ * @channel: channel number
  * @chain_a_max_pwr: chain a max power in 1/2 dBm
  * @chain_b_max_pwr: chain b max power in 1/2 dBm
  * @chain_c_max_pwr: chain c max power in 1/2 dBm
- * @reserved: not used, should be "zero"
+ * @delta_20_in_40: 20-in-40 deltas (hi/lo)
  * @mimo2_max_pwr: mimo2 max power in 1/2 dBm
  * @mimo3_max_pwr: mimo3 max power in 1/2 dBm
  *
  */
 struct iwl_eeprom_enhanced_txpwr {
-	__le16 common;
+	u8 flags;
+	u8 channel;
 	s8 chain_a_max;
 	s8 chain_b_max;
 	s8 chain_c_max;
-	s8 reserved;
+	u8 delta_20_in_40;
 	s8 mimo2_max;
 	s8 mimo3_max;
 } __packed;
@@ -186,6 +208,8 @@ struct iwl_eeprom_enhanced_txpwr {
 #define EEPROM_LINK_CALIBRATION      (2*0x67)
 #define EEPROM_LINK_PROCESS_ADJST    (2*0x68)
 #define EEPROM_LINK_OTHERS           (2*0x69)
+#define EEPROM_LINK_TXP_LIMIT        (2*0x6a)
+#define EEPROM_LINK_TXP_LIMIT_SIZE   (2*0x6b)
 
 /* agn regulatory - indirect access */
 #define EEPROM_REG_BAND_1_CHANNELS       ((0x08)\
@@ -207,59 +231,6 @@ struct iwl_eeprom_enhanced_txpwr {
 #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS  ((0x80)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 14  bytes */
 
-/* 6000 and up regulatory tx power - indirect access */
-/* max. elements per section */
-#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS	(8)
-#define EEPROM_TXPOWER_COMMON_HT40_INDEX	(2)
-
-/**
- * Partition the enhanced tx power portion of eeprom image into
- * 10 sections based on band, modulation, frequency and channel
- *
- * Section 1: all CCK channels
- * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40 ) channels
- * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
- * Section 4: 2.4 GHz 20MHz channels: 1, 2, 10, 11. Both Legacy and HT
- * Section 5: 2.4 GHz 40MHz channels: 1, 2, 6, 7, 9, (_above_)
- * Section 6: 5.2 GHz 20MHz channels: 36, 64, 100, both Legacy and HT
- * Section 7: 5.2 GHz 40MHz channels: 36, 60, 100 (_above_)
- * Section 8: 2.4 GHz channel 13, Both Legacy and HT
- * Section 9: 2.4 GHz channel 140, Both Legacy and HT
- * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
- */
-/* 2.4 GHz band: CCK */
-#define EEPROM_LB_CCK_20_COMMON       ((0xA8)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 8 bytes */
-/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_LB_OFDM_COMMON       ((0xB0)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
-/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_HB_OFDM_COMMON       ((0xC8)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
-/* 2.4GHz band channels:
- *	1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
-#define EEPROM_LB_OFDM_20_BAND       ((0xE0)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 64 bytes */
-/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
-#define EEPROM_LB_OFDM_HT40_BAND       ((0x120)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 40 bytes */
-/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
-#define EEPROM_HB_OFDM_20_BAND       ((0x148)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 48 bytes */
-/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND       ((0x178)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
-/* 2.4 GHz band, channnel 13: Legacy, HT */
-#define EEPROM_LB_OFDM_20_CHANNEL_13       ((0x190)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
-/* 5.2 GHz band, channnel 140: Legacy, HT */
-#define EEPROM_HB_OFDM_20_CHANNEL_140       ((0x1A0)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
-/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND_1       ((0x1B0)\
-		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
-
-
 /* 5050 Specific */
 #define EEPROM_5050_TX_POWER_VERSION    (4)
 #define EEPROM_5050_EEPROM_VERSION	(0x21E)
@@ -389,6 +360,8 @@ struct iwl_eeprom_calib_info {
 #define INDIRECT_CALIBRATION        0x00040000
 #define INDIRECT_PROCESS_ADJST      0x00050000
 #define INDIRECT_OTHERS             0x00060000
+#define INDIRECT_TXP_LIMIT          0x00070000
+#define INDIRECT_TXP_LIMIT_SIZE     0x00080000
 #define INDIRECT_ADDRESS            0x00100000
 
 /* General */
@@ -397,11 +370,10 @@ struct iwl_eeprom_calib_info {
 #define EEPROM_BOARD_REVISION               (2*0x35)	/* 2  bytes */
 #define EEPROM_BOARD_PBA_NUMBER             (2*0x3B+1)	/* 9  bytes */
 #define EEPROM_VERSION                      (2*0x44)	/* 2  bytes */
-#define EEPROM_SKU_CAP                      (2*0x45)	/* 1  bytes */
+#define EEPROM_SKU_CAP                      (2*0x45)	/* 2  bytes */
 #define EEPROM_OEM_MODE                     (2*0x46)	/* 2  bytes */
 #define EEPROM_WOWLAN_MODE                  (2*0x47)	/* 2  bytes */
 #define EEPROM_RADIO_CONFIG                 (2*0x48)	/* 2  bytes */
-#define EEPROM_3945_M_VERSION               (2*0x4A)	/* 1  bytes */
 #define EEPROM_NUM_MAC_ADDRESS              (2*0x4C)	/* 2  bytes */
 
 /* The following masks are to be applied on EEPROM_RADIO_CONFIG */
@@ -504,6 +476,7 @@ struct iwl_eeprom_ops {
 int iwl_eeprom_init(struct iwl_priv *priv);
 void iwl_eeprom_free(struct iwl_priv *priv);
 int  iwl_eeprom_check_version(struct iwl_priv *priv);
+int  iwl_eeprom_check_sku(struct iwl_priv *priv);
 const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset);
 int iwlcore_eeprom_verify_signature(struct iwl_priv *priv);
 u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset);
diff --git a/drivers/net/wireless/iwlwifi/iwl-helpers.h b/drivers/net/wireless/iwlwifi/iwl-helpers.h
index 1aaef70deae..8821f088ba7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-helpers.h
+++ b/drivers/net/wireless/iwlwifi/iwl-helpers.h
@@ -44,15 +44,6 @@ static inline struct ieee80211_conf *ieee80211_get_hw_conf(
 	return &hw->conf;
 }
 
-static inline unsigned long elapsed_jiffies(unsigned long start,
-					    unsigned long end)
-{
-	if (end >= start)
-		return end - start;
-
-	return end + (MAX_JIFFY_OFFSET - start) + 1;
-}
-
 /**
  * iwl_queue_inc_wrap - increment queue index, wrap back to beginning
  * @index -- current index
@@ -104,42 +95,36 @@ static inline int iwl_alloc_fw_desc(struct pci_dev *pci_dev,
  * | | | | | | | |
  * | | | | | | +-+-------- AC queue (0-3)
  * | | | | | |
- * | +-+-+-+-+------------ HW A-MPDU queue
+ * | +-+-+-+-+------------ HW queue ID
  * |
- * +---------------------- indicates agg queue
+ * +---------------------- unused
  */
-static inline u8 iwl_virtual_agg_queue_num(u8 ac, u8 hwq)
+static inline void iwl_set_swq_id(struct iwl_tx_queue *txq, u8 ac, u8 hwq)
 {
 	BUG_ON(ac > 3);   /* only have 2 bits */
-	BUG_ON(hwq > 31); /* only have 5 bits */
+	BUG_ON(hwq > 31); /* only use 5 bits */
 
-	return 0x80 | (hwq << 2) | ac;
+	txq->swq_id = (hwq << 2) | ac;
 }
 
-static inline void iwl_wake_queue(struct iwl_priv *priv, u8 queue)
+static inline void iwl_wake_queue(struct iwl_priv *priv,
+				  struct iwl_tx_queue *txq)
 {
-	u8 ac = queue;
-	u8 hwq = queue;
-
-	if (queue & 0x80) {
-		ac = queue & 3;
-		hwq = (queue >> 2) & 0x1f;
-	}
+	u8 queue = txq->swq_id;
+	u8 ac = queue & 3;
+	u8 hwq = (queue >> 2) & 0x1f;
 
 	if (test_and_clear_bit(hwq, priv->queue_stopped))
 		if (atomic_dec_return(&priv->queue_stop_count[ac]) <= 0)
 			ieee80211_wake_queue(priv->hw, ac);
 }
 
-static inline void iwl_stop_queue(struct iwl_priv *priv, u8 queue)
+static inline void iwl_stop_queue(struct iwl_priv *priv,
+				  struct iwl_tx_queue *txq)
 {
-	u8 ac = queue;
-	u8 hwq = queue;
-
-	if (queue & 0x80) {
-		ac = queue & 3;
-		hwq = (queue >> 2) & 0x1f;
-	}
+	u8 queue = txq->swq_id;
+	u8 ac = queue & 3;
+	u8 hwq = (queue >> 2) & 0x1f;
 
 	if (!test_and_set_bit(hwq, priv->queue_stopped))
 		if (atomic_inc_return(&priv->queue_stop_count[ac]) > 0)
@@ -163,6 +148,12 @@ static inline void iwl_disable_interrupts(struct iwl_priv *priv)
 	IWL_DEBUG_ISR(priv, "Disabled interrupts\n");
 }
 
+static inline void iwl_enable_rfkill_int(struct iwl_priv *priv)
+{
+	IWL_DEBUG_ISR(priv, "Enabling rfkill interrupt\n");
+	iwl_write32(priv, CSR_INT_MASK, CSR_INT_BIT_RF_KILL);
+}
+
 static inline void iwl_enable_interrupts(struct iwl_priv *priv)
 {
 	IWL_DEBUG_ISR(priv, "Enabling interrupts\n");
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index 86c2b6fed0c..46ccdf406e8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -45,9 +45,8 @@
 /* default: IWL_LED_BLINK(0) using blinking index table */
 static int led_mode;
 module_param(led_mode, int, S_IRUGO);
-MODULE_PARM_DESC(led_mode, "led mode: 0=blinking, 1=On(RF On)/Off(RF Off), "
-			   "(default 0)");
-
+MODULE_PARM_DESC(led_mode, "0=system default, "
+		"1=On(RF On)/Off(RF Off), 2=blinking");
 
 static const struct {
 	u16 tpt;	/* Mb/s */
@@ -128,12 +127,13 @@ EXPORT_SYMBOL(iwl_led_start);
 int iwl_led_associate(struct iwl_priv *priv)
 {
 	IWL_DEBUG_LED(priv, "Associated\n");
-	if (led_mode == IWL_LED_BLINK)
+	if (priv->cfg->led_mode == IWL_LED_BLINK)
 		priv->allow_blinking = 1;
 	priv->last_blink_time = jiffies;
 
 	return 0;
 }
+EXPORT_SYMBOL(iwl_led_associate);
 
 int iwl_led_disassociate(struct iwl_priv *priv)
 {
@@ -141,6 +141,7 @@ int iwl_led_disassociate(struct iwl_priv *priv)
 
 	return 0;
 }
+EXPORT_SYMBOL(iwl_led_disassociate);
 
 /*
  * calculate blink rate according to last second Tx/Rx activities
@@ -221,5 +222,8 @@ void iwl_leds_init(struct iwl_priv *priv)
 	priv->last_blink_rate = 0;
 	priv->last_blink_time = 0;
 	priv->allow_blinking = 0;
+	if (led_mode != IWL_LED_DEFAULT &&
+	    led_mode != priv->cfg->led_mode)
+		priv->cfg->led_mode = led_mode;
 }
 EXPORT_SYMBOL(iwl_leds_init);
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h
index 49a70baa3fb..9079b33486e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-led.h
@@ -47,14 +47,16 @@ enum led_type {
 
 /*
  * LED mode
- *    IWL_LED_BLINK:    adjust led blink rate based on blink table
+ *    IWL_LED_DEFAULT:  use system default
  *    IWL_LED_RF_STATE: turn LED on/off based on RF state
  *			LED ON  = RF ON
  *			LED OFF = RF OFF
+ *    IWL_LED_BLINK:    adjust led blink rate based on blink table
  */
 enum iwl_led_mode {
-	IWL_LED_BLINK,
+	IWL_LED_DEFAULT,
 	IWL_LED_RF_STATE,
+	IWL_LED_BLINK,
 };
 
 void iwl_leds_init(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.c b/drivers/net/wireless/iwlwifi/iwl-legacy.c
new file mode 100644
index 00000000000..a08b4e56e6b
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-legacy.c
@@ -0,0 +1,662 @@
+/******************************************************************************
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <net/mac80211.h>
+
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-helpers.h"
+#include "iwl-legacy.h"
+
+static void iwl_update_qos(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	if (!ctx->is_active)
+		return;
+
+	ctx->qos_data.def_qos_parm.qos_flags = 0;
+
+	if (ctx->qos_data.qos_active)
+		ctx->qos_data.def_qos_parm.qos_flags |=
+			QOS_PARAM_FLG_UPDATE_EDCA_MSK;
+
+	if (ctx->ht.enabled)
+		ctx->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK;
+
+	IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n",
+		      ctx->qos_data.qos_active,
+		      ctx->qos_data.def_qos_parm.qos_flags);
+
+	iwl_send_cmd_pdu_async(priv, ctx->qos_cmd,
+			       sizeof(struct iwl_qosparam_cmd),
+			       &ctx->qos_data.def_qos_parm, NULL);
+}
+
+/**
+ * iwl_legacy_mac_config - mac80211 config callback
+ */
+int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct iwl_priv *priv = hw->priv;
+	const struct iwl_channel_info *ch_info;
+	struct ieee80211_conf *conf = &hw->conf;
+	struct ieee80211_channel *channel = conf->channel;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
+	struct iwl_rxon_context *ctx;
+	unsigned long flags = 0;
+	int ret = 0;
+	u16 ch;
+	int scan_active = 0;
+	bool ht_changed[NUM_IWL_RXON_CTX] = {};
+
+	if (WARN_ON(!priv->cfg->ops->legacy))
+		return -EOPNOTSUPP;
+
+	mutex_lock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
+					channel->hw_value, changed);
+
+	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
+			test_bit(STATUS_SCANNING, &priv->status))) {
+		scan_active = 1;
+		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
+	}
+
+	if (changed & (IEEE80211_CONF_CHANGE_SMPS |
+		       IEEE80211_CONF_CHANGE_CHANNEL)) {
+		/* mac80211 uses static for non-HT which is what we want */
+		priv->current_ht_config.smps = conf->smps_mode;
+
+		/*
+		 * Recalculate chain counts.
+		 *
+		 * If monitor mode is enabled then mac80211 will
+		 * set up the SM PS mode to OFF if an HT channel is
+		 * configured.
+		 */
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			for_each_context(priv, ctx)
+				priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
+	}
+
+	/* during scanning mac80211 will delay channel setting until
+	 * scan finish with changed = 0
+	 */
+	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
+		if (scan_active)
+			goto set_ch_out;
+
+		ch = channel->hw_value;
+		ch_info = iwl_get_channel_info(priv, channel->band, ch);
+		if (!is_channel_valid(ch_info)) {
+			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
+
+		spin_lock_irqsave(&priv->lock, flags);
+
+		for_each_context(priv, ctx) {
+			/* Configure HT40 channels */
+			if (ctx->ht.enabled != conf_is_ht(conf)) {
+				ctx->ht.enabled = conf_is_ht(conf);
+				ht_changed[ctx->ctxid] = true;
+			}
+			if (ctx->ht.enabled) {
+				if (conf_is_ht40_minus(conf)) {
+					ctx->ht.extension_chan_offset =
+						IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+					ctx->ht.is_40mhz = true;
+				} else if (conf_is_ht40_plus(conf)) {
+					ctx->ht.extension_chan_offset =
+						IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+					ctx->ht.is_40mhz = true;
+				} else {
+					ctx->ht.extension_chan_offset =
+						IEEE80211_HT_PARAM_CHA_SEC_NONE;
+					ctx->ht.is_40mhz = false;
+				}
+			} else
+				ctx->ht.is_40mhz = false;
+
+			/*
+			 * Default to no protection. Protection mode will
+			 * later be set from BSS config in iwl_ht_conf
+			 */
+			ctx->ht.protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
+
+			/* if we are switching from ht to 2.4 clear flags
+			 * from any ht related info since 2.4 does not
+			 * support ht */
+			if ((le16_to_cpu(ctx->staging.channel) != ch))
+				ctx->staging.flags = 0;
+
+			iwl_set_rxon_channel(priv, channel, ctx);
+			iwl_set_rxon_ht(priv, ht_conf);
+
+			iwl_set_flags_for_band(priv, ctx, channel->band,
+					       ctx->vif);
+		}
+
+		spin_unlock_irqrestore(&priv->lock, flags);
+
+		if (priv->cfg->ops->legacy->update_bcast_stations)
+			ret = priv->cfg->ops->legacy->update_bcast_stations(priv);
+
+ set_ch_out:
+		/* The list of supported rates and rate mask can be different
+		 * for each band; since the band may have changed, reset
+		 * the rate mask to what mac80211 lists */
+		iwl_set_rate(priv);
+	}
+
+	if (changed & (IEEE80211_CONF_CHANGE_PS |
+			IEEE80211_CONF_CHANGE_IDLE)) {
+		ret = iwl_power_update_mode(priv, false);
+		if (ret)
+			IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
+			priv->tx_power_user_lmt, conf->power_level);
+
+		iwl_set_tx_power(priv, conf->power_level, false);
+	}
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		goto out;
+	}
+
+	if (scan_active)
+		goto out;
+
+	for_each_context(priv, ctx) {
+		if (memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging)))
+			iwlcore_commit_rxon(priv, ctx);
+		else
+			IWL_DEBUG_INFO(priv,
+				"Not re-sending same RXON configuration.\n");
+		if (ht_changed[ctx->ctxid])
+			iwl_update_qos(priv, ctx);
+	}
+
+out:
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	mutex_unlock(&priv->mutex);
+	return ret;
+}
+EXPORT_SYMBOL(iwl_legacy_mac_config);
+
+void iwl_legacy_mac_reset_tsf(struct ieee80211_hw *hw)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+	/* IBSS can only be the IWL_RXON_CTX_BSS context */
+	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+
+	if (WARN_ON(!priv->cfg->ops->legacy))
+		return;
+
+	mutex_lock(&priv->mutex);
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	spin_lock_irqsave(&priv->lock, flags);
+	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_config));
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* new association get rid of ibss beacon skb */
+	if (priv->beacon_skb)
+		dev_kfree_skb(priv->beacon_skb);
+
+	priv->beacon_skb = NULL;
+
+	priv->timestamp = 0;
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	iwl_scan_cancel_timeout(priv, 100);
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		mutex_unlock(&priv->mutex);
+		return;
+	}
+
+	/* we are restarting association process
+	 * clear RXON_FILTER_ASSOC_MSK bit
+	 */
+	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	iwlcore_commit_rxon(priv, ctx);
+
+	iwl_set_rate(priv);
+
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+EXPORT_SYMBOL(iwl_legacy_mac_reset_tsf);
+
+static void iwl_ht_conf(struct iwl_priv *priv,
+			struct ieee80211_vif *vif)
+{
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
+	struct ieee80211_sta *sta;
+	struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+
+	IWL_DEBUG_ASSOC(priv, "enter:\n");
+
+	if (!ctx->ht.enabled)
+		return;
+
+	ctx->ht.protection =
+		bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
+	ctx->ht.non_gf_sta_present =
+		!!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+
+	ht_conf->single_chain_sufficient = false;
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		rcu_read_lock();
+		sta = ieee80211_find_sta(vif, bss_conf->bssid);
+		if (sta) {
+			struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+			int maxstreams;
+
+			maxstreams = (ht_cap->mcs.tx_params &
+				      IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
+					>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+			maxstreams += 1;
+
+			if ((ht_cap->mcs.rx_mask[1] == 0) &&
+			    (ht_cap->mcs.rx_mask[2] == 0))
+				ht_conf->single_chain_sufficient = true;
+			if (maxstreams <= 1)
+				ht_conf->single_chain_sufficient = true;
+		} else {
+			/*
+			 * If at all, this can only happen through a race
+			 * when the AP disconnects us while we're still
+			 * setting up the connection, in that case mac80211
+			 * will soon tell us about that.
+			 */
+			ht_conf->single_chain_sufficient = true;
+		}
+		rcu_read_unlock();
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		ht_conf->single_chain_sufficient = true;
+		break;
+	default:
+		break;
+	}
+
+	IWL_DEBUG_ASSOC(priv, "leave\n");
+}
+
+static inline void iwl_set_no_assoc(struct iwl_priv *priv,
+				    struct ieee80211_vif *vif)
+{
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+
+	iwl_led_disassociate(priv);
+	/*
+	 * inform the ucode that there is no longer an
+	 * association and that no more packets should be
+	 * sent
+	 */
+	ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+	ctx->staging.assoc_id = 0;
+	iwlcore_commit_rxon(priv, ctx);
+}
+
+static void iwlcore_beacon_update(struct ieee80211_hw *hw,
+				  struct ieee80211_vif *vif)
+{
+	struct iwl_priv *priv = hw->priv;
+	unsigned long flags;
+	__le64 timestamp;
+	struct sk_buff *skb = ieee80211_beacon_get(hw, vif);
+
+	if (!skb)
+		return;
+
+	IWL_DEBUG_MAC80211(priv, "enter\n");
+
+	lockdep_assert_held(&priv->mutex);
+
+	if (!priv->beacon_ctx) {
+		IWL_ERR(priv, "update beacon but no beacon context!\n");
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	if (priv->beacon_skb)
+		dev_kfree_skb(priv->beacon_skb);
+
+	priv->beacon_skb = skb;
+
+	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
+	priv->timestamp = le64_to_cpu(timestamp);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (!iwl_is_ready_rf(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n");
+		return;
+	}
+
+	priv->cfg->ops->legacy->post_associate(priv);
+}
+
+void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_bss_conf *bss_conf,
+				     u32 changes)
+{
+	struct iwl_priv *priv = hw->priv;
+	struct iwl_rxon_context *ctx = iwl_rxon_ctx_from_vif(vif);
+	int ret;
+
+	if (WARN_ON(!priv->cfg->ops->legacy))
+		return;
+
+	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes);
+
+	if (!iwl_is_alive(priv))
+		return;
+
+	mutex_lock(&priv->mutex);
+
+	if (changes & BSS_CHANGED_QOS) {
+		unsigned long flags;
+
+		spin_lock_irqsave(&priv->lock, flags);
+		ctx->qos_data.qos_active = bss_conf->qos;
+		iwl_update_qos(priv, ctx);
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+
+	if (changes & BSS_CHANGED_BEACON_ENABLED) {
+		/*
+		 * the add_interface code must make sure we only ever
+		 * have a single interface that could be beaconing at
+		 * any time.
+		 */
+		if (vif->bss_conf.enable_beacon)
+			priv->beacon_ctx = ctx;
+		else
+			priv->beacon_ctx = NULL;
+	}
+
+	if (changes & BSS_CHANGED_BEACON && vif->type == NL80211_IFTYPE_AP) {
+		dev_kfree_skb(priv->beacon_skb);
+		priv->beacon_skb = ieee80211_beacon_get(hw, vif);
+	}
+
+	if (changes & BSS_CHANGED_BEACON_INT && vif->type == NL80211_IFTYPE_AP)
+		iwl_send_rxon_timing(priv, ctx);
+
+	if (changes & BSS_CHANGED_BSSID) {
+		IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid);
+
+		/*
+		 * If there is currently a HW scan going on in the
+		 * background then we need to cancel it else the RXON
+		 * below/in post_associate will fail.
+		 */
+		if (iwl_scan_cancel_timeout(priv, 100)) {
+			IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
+			IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
+			mutex_unlock(&priv->mutex);
+			return;
+		}
+
+		/* mac80211 only sets assoc when in STATION mode */
+		if (vif->type == NL80211_IFTYPE_ADHOC || bss_conf->assoc) {
+			memcpy(ctx->staging.bssid_addr,
+			       bss_conf->bssid, ETH_ALEN);
+
+			/* currently needed in a few places */
+			memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+		} else {
+			ctx->staging.filter_flags &=
+				~RXON_FILTER_ASSOC_MSK;
+		}
+
+	}
+
+	/*
+	 * This needs to be after setting the BSSID in case
+	 * mac80211 decides to do both changes at once because
+	 * it will invoke post_associate.
+	 */
+	if (vif->type == NL80211_IFTYPE_ADHOC && changes & BSS_CHANGED_BEACON)
+		iwlcore_beacon_update(hw, vif);
+
+	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n",
+				   bss_conf->use_short_preamble);
+		if (bss_conf->use_short_preamble)
+			ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	}
+
+	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
+		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot);
+		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
+			ctx->staging.flags |= RXON_FLG_TGG_PROTECT_MSK;
+		else
+			ctx->staging.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+		if (bss_conf->use_cts_prot)
+			ctx->staging.flags |= RXON_FLG_SELF_CTS_EN;
+		else
+			ctx->staging.flags &= ~RXON_FLG_SELF_CTS_EN;
+	}
+
+	if (changes & BSS_CHANGED_BASIC_RATES) {
+		/* XXX use this information
+		 *
+		 * To do that, remove code from iwl_set_rate() and put something
+		 * like this here:
+		 *
+		if (A-band)
+			ctx->staging.ofdm_basic_rates =
+				bss_conf->basic_rates;
+		else
+			ctx->staging.ofdm_basic_rates =
+				bss_conf->basic_rates >> 4;
+			ctx->staging.cck_basic_rates =
+				bss_conf->basic_rates & 0xF;
+		 */
+	}
+
+	if (changes & BSS_CHANGED_HT) {
+		iwl_ht_conf(priv, vif);
+
+		if (priv->cfg->ops->hcmd->set_rxon_chain)
+			priv->cfg->ops->hcmd->set_rxon_chain(priv, ctx);
+	}
+
+	if (changes & BSS_CHANGED_ASSOC) {
+		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc);
+		if (bss_conf->assoc) {
+			priv->timestamp = bss_conf->timestamp;
+
+			iwl_led_associate(priv);
+
+			if (!iwl_is_rfkill(priv))
+				priv->cfg->ops->legacy->post_associate(priv);
+		} else
+			iwl_set_no_assoc(priv, vif);
+	}
+
+	if (changes && iwl_is_associated_ctx(ctx) && bss_conf->aid) {
+		IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n",
+				   changes);
+		ret = iwl_send_rxon_assoc(priv, ctx);
+		if (!ret) {
+			/* Sync active_rxon with latest change. */
+			memcpy((void *)&ctx->active,
+				&ctx->staging,
+				sizeof(struct iwl_rxon_cmd));
+		}
+	}
+
+	if (changes & BSS_CHANGED_BEACON_ENABLED) {
+		if (vif->bss_conf.enable_beacon) {
+			memcpy(ctx->staging.bssid_addr,
+			       bss_conf->bssid, ETH_ALEN);
+			memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+			iwl_led_associate(priv);
+			priv->cfg->ops->legacy->config_ap(priv);
+		} else
+			iwl_set_no_assoc(priv, vif);
+	}
+
+	if (changes & BSS_CHANGED_IBSS) {
+		ret = priv->cfg->ops->legacy->manage_ibss_station(priv, vif,
+							bss_conf->ibss_joined);
+		if (ret)
+			IWL_ERR(priv, "failed to %s IBSS station %pM\n",
+				bss_conf->ibss_joined ? "add" : "remove",
+				bss_conf->bssid);
+	}
+
+	mutex_unlock(&priv->mutex);
+
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+}
+EXPORT_SYMBOL(iwl_legacy_mac_bss_info_changed);
+
+irqreturn_t iwl_isr_legacy(int irq, void *data)
+{
+	struct iwl_priv *priv = data;
+	u32 inta, inta_mask;
+	u32 inta_fh;
+	unsigned long flags;
+	if (!priv)
+		return IRQ_NONE;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* Disable (but don't clear!) interrupts here to avoid
+	 *    back-to-back ISRs and sporadic interrupts from our NIC.
+	 * If we have something to service, the tasklet will re-enable ints.
+	 * If we *don't* have something, we'll re-enable before leaving here. */
+	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */
+	iwl_write32(priv, CSR_INT_MASK, 0x00000000);
+
+	/* Discover which interrupts are active/pending */
+	inta = iwl_read32(priv, CSR_INT);
+	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS);
+
+	/* Ignore interrupt if there's nothing in NIC to service.
+	 * This may be due to IRQ shared with another device,
+	 * or due to sporadic interrupts thrown from our NIC. */
+	if (!inta && !inta_fh) {
+		IWL_DEBUG_ISR(priv,
+			"Ignore interrupt, inta == 0, inta_fh == 0\n");
+		goto none;
+	}
+
+	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) {
+		/* Hardware disappeared. It might have already raised
+		 * an interrupt */
+		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta);
+		goto unplugged;
+	}
+
+	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+		      inta, inta_mask, inta_fh);
+
+	inta &= ~CSR_INT_BIT_SCD;
+
+	/* iwl_irq_tasklet() will service interrupts and re-enable them */
+	if (likely(inta || inta_fh))
+		tasklet_schedule(&priv->irq_tasklet);
+
+unplugged:
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return IRQ_HANDLED;
+
+none:
+	/* re-enable interrupts here since we don't have anything to service. */
+	/* only Re-enable if diabled by irq */
+	if (test_bit(STATUS_INT_ENABLED, &priv->status))
+		iwl_enable_interrupts(priv);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return IRQ_NONE;
+}
+EXPORT_SYMBOL(iwl_isr_legacy);
+
+/*
+ *  iwl_legacy_tx_cmd_protection: Set rts/cts. 3945 and 4965 only share this
+ *  function.
+ */
+void iwl_legacy_tx_cmd_protection(struct iwl_priv *priv,
+			       struct ieee80211_tx_info *info,
+			       __le16 fc, __le32 *tx_flags)
+{
+	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+		*tx_flags |= TX_CMD_FLG_RTS_MSK;
+		*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
+		*tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
+
+		if (!ieee80211_is_mgmt(fc))
+			return;
+
+		switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
+		case cpu_to_le16(IEEE80211_STYPE_AUTH):
+		case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
+		case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ):
+		case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ):
+			*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+			*tx_flags |= TX_CMD_FLG_CTS_MSK;
+			break;
+		}
+	} else if (info->control.rates[0].flags &
+		   IEEE80211_TX_RC_USE_CTS_PROTECT) {
+		*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+		*tx_flags |= TX_CMD_FLG_CTS_MSK;
+		*tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
+	}
+}
+EXPORT_SYMBOL(iwl_legacy_tx_cmd_protection);
diff --git a/drivers/net/wireless/iwlwifi/iwl-legacy.h b/drivers/net/wireless/iwlwifi/iwl-legacy.h
new file mode 100644
index 00000000000..9f7b2f93596
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-legacy.h
@@ -0,0 +1,79 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license.  When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2010 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *  * Neither the name Intel Corporation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *****************************************************************************/
+
+#ifndef __iwl_legacy_h__
+#define __iwl_legacy_h__
+
+/* mac80211 handlers */
+int iwl_legacy_mac_config(struct ieee80211_hw *hw, u32 changed);
+void iwl_legacy_mac_reset_tsf(struct ieee80211_hw *hw);
+void iwl_legacy_mac_bss_info_changed(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_bss_conf *bss_conf,
+				     u32 changes);
+void iwl_legacy_tx_cmd_protection(struct iwl_priv *priv,
+				struct ieee80211_tx_info *info,
+				__le16 fc, __le32 *tx_flags);
+
+irqreturn_t iwl_isr_legacy(int irq, void *data);
+
+#endif /* __iwl_legacy_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 49d7788937a..1eec18d909d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -75,6 +75,10 @@ struct iwl_power_vec_entry {
 
 #define NOSLP cpu_to_le16(0), 0, 0
 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
+#define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK |	\
+		IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \
+		IWL_POWER_ADVANCE_PM_ENA_MSK)
+#define ASLP_TOUT(T) cpu_to_le32(T)
 #define TU_TO_USEC 1024
 #define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
 #define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
@@ -114,6 +118,52 @@ static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
 	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
 };
 
+/* advance power management */
+/* DTIM 0 - 2 */
+static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = {
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
+};
+
+
+/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
+/* DTIM 3 - 10 */
+static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = {
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2}
+};
+
+/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
+/* DTIM 11 - */
+static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = {
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
+	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
+		SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
+};
+
 static void iwl_static_sleep_cmd(struct iwl_priv *priv,
 				 struct iwl_powertable_cmd *cmd,
 				 enum iwl_power_level lvl, int period)
@@ -124,11 +174,19 @@ static void iwl_static_sleep_cmd(struct iwl_priv *priv,
 	u8 skip;
 	u32 slp_itrvl;
 
-	table = range_2;
-	if (period <= IWL_DTIM_RANGE_1_MAX)
-		table = range_1;
-	if (period <= IWL_DTIM_RANGE_0_MAX)
-		table = range_0;
+	if (priv->cfg->adv_pm) {
+		table = apm_range_2;
+		if (period <= IWL_DTIM_RANGE_1_MAX)
+			table = apm_range_1;
+		if (period <= IWL_DTIM_RANGE_0_MAX)
+			table = apm_range_0;
+	} else {
+		table = range_2;
+		if (period <= IWL_DTIM_RANGE_1_MAX)
+			table = range_1;
+		if (period <= IWL_DTIM_RANGE_0_MAX)
+			table = range_0;
+	}
 
 	BUG_ON(lvl < 0 || lvl >= IWL_POWER_NUM);
 
@@ -163,6 +221,20 @@ static void iwl_static_sleep_cmd(struct iwl_priv *priv,
 	else
 		cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
 
+	if (priv->cfg->base_params->shadow_reg_enable)
+		cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
+	else
+		cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;
+
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		if (!priv->cfg->bt_params->bt_sco_disable)
+			cmd->flags |= IWL_POWER_BT_SCO_ENA;
+		else
+			cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
+	}
+
+
 	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
 	if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
 		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
@@ -236,6 +308,19 @@ static void iwl_power_fill_sleep_cmd(struct iwl_priv *priv,
 	if (priv->power_data.pci_pm)
 		cmd->flags |= IWL_POWER_PCI_PM_MSK;
 
+	if (priv->cfg->base_params->shadow_reg_enable)
+		cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
+	else
+		cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;
+
+	if (priv->cfg->bt_params &&
+	    priv->cfg->bt_params->advanced_bt_coexist) {
+		if (!priv->cfg->bt_params->bt_sco_disable)
+			cmd->flags |= IWL_POWER_BT_SCO_ENA;
+		else
+			cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
+	}
+
 	cmd->rx_data_timeout = cpu_to_le32(1000 * dynps_ms);
 	cmd->tx_data_timeout = cpu_to_le32(1000 * dynps_ms);
 
@@ -263,70 +348,95 @@ static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
 				sizeof(struct iwl_powertable_cmd), cmd);
 }
 
-/* priv->mutex must be held */
-int iwl_power_update_mode(struct iwl_priv *priv, bool force)
+static void iwl_power_build_cmd(struct iwl_priv *priv,
+				struct iwl_powertable_cmd *cmd)
 {
-	int ret = 0;
 	bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
-	bool update_chains;
-	struct iwl_powertable_cmd cmd;
 	int dtimper;
 
-	/* Don't update the RX chain when chain noise calibration is running */
-	update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
-			priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
-
 	dtimper = priv->hw->conf.ps_dtim_period ?: 1;
 
 	if (priv->cfg->base_params->broken_powersave)
-		iwl_power_sleep_cam_cmd(priv, &cmd);
+		iwl_power_sleep_cam_cmd(priv, cmd);
 	else if (priv->cfg->base_params->supports_idle &&
 		 priv->hw->conf.flags & IEEE80211_CONF_IDLE)
-		iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_5, 20);
+		iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
 	else if (priv->cfg->ops->lib->tt_ops.lower_power_detection &&
 		 priv->cfg->ops->lib->tt_ops.tt_power_mode &&
 		 priv->cfg->ops->lib->tt_ops.lower_power_detection(priv)) {
 		/* in thermal throttling low power state */
-		iwl_static_sleep_cmd(priv, &cmd,
+		iwl_static_sleep_cmd(priv, cmd,
 		    priv->cfg->ops->lib->tt_ops.tt_power_mode(priv), dtimper);
 	} else if (!enabled)
-		iwl_power_sleep_cam_cmd(priv, &cmd);
+		iwl_power_sleep_cam_cmd(priv, cmd);
 	else if (priv->power_data.debug_sleep_level_override >= 0)
-		iwl_static_sleep_cmd(priv, &cmd,
+		iwl_static_sleep_cmd(priv, cmd,
 				     priv->power_data.debug_sleep_level_override,
 				     dtimper);
 	else if (no_sleep_autoadjust)
-		iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_1, dtimper);
+		iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_1, dtimper);
 	else
-		iwl_power_fill_sleep_cmd(priv, &cmd,
+		iwl_power_fill_sleep_cmd(priv, cmd,
 					 priv->hw->conf.dynamic_ps_timeout,
 					 priv->hw->conf.max_sleep_period);
+}
+
+int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
+		       bool force)
+{
+	int ret;
+	bool update_chains;
+
+	lockdep_assert_held(&priv->mutex);
+
+	/* Don't update the RX chain when chain noise calibration is running */
+	update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
+			priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
+
+	if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
+		return 0;
+
+	if (!iwl_is_ready_rf(priv))
+		return -EIO;
 
-	if (iwl_is_ready_rf(priv) &&
-	    (memcmp(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd)) || force)) {
-		if (cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
-			set_bit(STATUS_POWER_PMI, &priv->status);
-
-		ret = iwl_set_power(priv, &cmd);
-		if (!ret) {
-			if (!(cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
-				clear_bit(STATUS_POWER_PMI, &priv->status);
-
-			if (priv->cfg->ops->lib->update_chain_flags &&
-			    update_chains)
-				priv->cfg->ops->lib->update_chain_flags(priv);
-			else if (priv->cfg->ops->lib->update_chain_flags)
-				IWL_DEBUG_POWER(priv,
+	/* scan complete use sleep_power_next, need to be updated */
+	memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
+	if (test_bit(STATUS_SCANNING, &priv->status) && !force) {
+		IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n");
+		return 0;
+	}
+
+	if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
+		set_bit(STATUS_POWER_PMI, &priv->status);
+
+	ret = iwl_set_power(priv, cmd);
+	if (!ret) {
+		if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
+			clear_bit(STATUS_POWER_PMI, &priv->status);
+
+		if (priv->cfg->ops->lib->update_chain_flags && update_chains)
+			priv->cfg->ops->lib->update_chain_flags(priv);
+		else if (priv->cfg->ops->lib->update_chain_flags)
+			IWL_DEBUG_POWER(priv,
 					"Cannot update the power, chain noise "
 					"calibration running: %d\n",
 					priv->chain_noise_data.state);
-			memcpy(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd));
-		} else
-			IWL_ERR(priv, "set power fail, ret = %d", ret);
-	}
+
+		memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd));
+	} else
+		IWL_ERR(priv, "set power fail, ret = %d", ret);
 
 	return ret;
 }
+EXPORT_SYMBOL(iwl_power_set_mode);
+
+int iwl_power_update_mode(struct iwl_priv *priv, bool force)
+{
+	struct iwl_powertable_cmd cmd;
+
+	iwl_power_build_cmd(priv, &cmd);
+	return iwl_power_set_mode(priv, &cmd, force);
+}
 EXPORT_SYMBOL(iwl_power_update_mode);
 
 /* initialize to default */
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index df81565a7cc..fe012032c28 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -41,10 +41,13 @@ enum iwl_power_level {
 
 struct iwl_power_mgr {
 	struct iwl_powertable_cmd sleep_cmd;
+	struct iwl_powertable_cmd sleep_cmd_next;
 	int debug_sleep_level_override;
 	bool pci_pm;
 };
 
+int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
+		       bool force);
 int iwl_power_update_mode(struct iwl_priv *priv, bool force);
 void iwl_power_initialize(struct iwl_priv *priv);
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index 5469655646a..86f5123bccd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -83,10 +83,10 @@
 #define APMG_DIGITAL_SVR_REG		(APMG_BASE + 0x0058)
 #define APMG_ANALOG_SVR_REG		(APMG_BASE + 0x006C)
 
+#define APMS_CLK_VAL_MRB_FUNC_MODE	(0x00000001)
 #define APMG_CLK_VAL_DMA_CLK_RQT	(0x00000200)
 #define APMG_CLK_VAL_BSM_CLK_RQT	(0x00000800)
 
-
 #define APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS	(0x00400000)
 #define APMG_PS_CTRL_VAL_RESET_REQ		(0x04000000)
 #define APMG_PS_CTRL_MSK_PWR_SRC		(0x03000000)
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index f436270ca39..87a6fd84d4d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -134,28 +134,37 @@ void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q
 	if (q->need_update == 0)
 		goto exit_unlock;
 
-	/* If power-saving is in use, make sure device is awake */
-	if (test_bit(STATUS_POWER_PMI, &priv->status)) {
-		reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
+	if (priv->cfg->base_params->shadow_reg_enable) {
+		/* shadow register enabled */
+		/* Device expects a multiple of 8 */
+		q->write_actual = (q->write & ~0x7);
+		iwl_write32(priv, rx_wrt_ptr_reg, q->write_actual);
+	} else {
+		/* If power-saving is in use, make sure device is awake */
+		if (test_bit(STATUS_POWER_PMI, &priv->status)) {
+			reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
 
-		if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
-			IWL_DEBUG_INFO(priv, "Rx queue requesting wakeup, GP1 = 0x%x\n",
-				      reg);
-			iwl_set_bit(priv, CSR_GP_CNTRL,
-				    CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-			goto exit_unlock;
-		}
+			if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+				IWL_DEBUG_INFO(priv,
+					"Rx queue requesting wakeup,"
+					" GP1 = 0x%x\n", reg);
+				iwl_set_bit(priv, CSR_GP_CNTRL,
+					CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+				goto exit_unlock;
+			}
 
-		q->write_actual = (q->write & ~0x7);
-		iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write_actual);
+			q->write_actual = (q->write & ~0x7);
+			iwl_write_direct32(priv, rx_wrt_ptr_reg,
+					q->write_actual);
 
-	/* Else device is assumed to be awake */
-	} else {
-		/* Device expects a multiple of 8 */
-		q->write_actual = (q->write & ~0x7);
-		iwl_write_direct32(priv, rx_wrt_ptr_reg, q->write_actual);
+		/* Else device is assumed to be awake */
+		} else {
+			/* Device expects a multiple of 8 */
+			q->write_actual = (q->write & ~0x7);
+			iwl_write_direct32(priv, rx_wrt_ptr_reg,
+				q->write_actual);
+		}
 	}
-
 	q->need_update = 0;
 
  exit_unlock:
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 67da3129578..12d9363d0af 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -252,8 +252,7 @@ static void iwl_rx_scan_complete_notif(struct iwl_priv *priv,
 
 	IWL_DEBUG_SCAN(priv, "Scan on %sGHz took %dms\n",
 		       (priv->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
-		       jiffies_to_msecs(elapsed_jiffies
-					(priv->scan_start, jiffies)));
+		       jiffies_to_msecs(jiffies - priv->scan_start));
 
 	queue_work(priv->workqueue, &priv->scan_completed);
 
@@ -603,13 +602,16 @@ out_settings:
 	if (!iwl_is_ready_rf(priv))
 		goto out;
 
-	/* Since setting the TXPOWER may have been deferred while
-	 * performing the scan, fire one off */
-	iwl_set_tx_power(priv, priv->tx_power_user_lmt, true);
+	/*
+	 * We do not commit power settings while scan is pending,
+	 * do it now if the settings changed.
+	 */
+	iwl_power_set_mode(priv, &priv->power_data.sleep_cmd_next, false);
+	iwl_set_tx_power(priv, priv->tx_power_next, false);
 
 	priv->cfg->ops->utils->post_scan(priv);
 
- out:
+out:
 	mutex_unlock(&priv->mutex);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 7c7f7dcb1b1..4776323b1eb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -400,7 +400,8 @@ static void iwl_sta_ucode_deactivate(struct iwl_priv *priv, u8 sta_id)
 }
 
 static int iwl_send_remove_station(struct iwl_priv *priv,
-				   const u8 *addr, int sta_id)
+				   const u8 *addr, int sta_id,
+				   bool temporary)
 {
 	struct iwl_rx_packet *pkt;
 	int ret;
@@ -436,9 +437,11 @@ static int iwl_send_remove_station(struct iwl_priv *priv,
 	if (!ret) {
 		switch (pkt->u.rem_sta.status) {
 		case REM_STA_SUCCESS_MSK:
-			spin_lock_irqsave(&priv->sta_lock, flags_spin);
-			iwl_sta_ucode_deactivate(priv, sta_id);
-			spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+			if (!temporary) {
+				spin_lock_irqsave(&priv->sta_lock, flags_spin);
+				iwl_sta_ucode_deactivate(priv, sta_id);
+				spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+			}
 			IWL_DEBUG_ASSOC(priv, "REPLY_REMOVE_STA PASSED\n");
 			break;
 		default:
@@ -505,7 +508,7 @@ int iwl_remove_station(struct iwl_priv *priv, const u8 sta_id,
 
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 
-	return iwl_send_remove_station(priv, addr, sta_id);
+	return iwl_send_remove_station(priv, addr, sta_id, false);
 out_err:
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 	return -EINVAL;
@@ -624,6 +627,49 @@ void iwl_restore_stations(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
 }
 EXPORT_SYMBOL(iwl_restore_stations);
 
+void iwl_reprogram_ap_sta(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
+{
+	unsigned long flags;
+	int sta_id = ctx->ap_sta_id;
+	int ret;
+	struct iwl_addsta_cmd sta_cmd;
+	struct iwl_link_quality_cmd lq;
+	bool active;
+
+	spin_lock_irqsave(&priv->sta_lock, flags);
+	if (!(priv->stations[sta_id].used & IWL_STA_DRIVER_ACTIVE)) {
+		spin_unlock_irqrestore(&priv->sta_lock, flags);
+		return;
+	}
+
+	memcpy(&sta_cmd, &priv->stations[sta_id].sta, sizeof(sta_cmd));
+	sta_cmd.mode = 0;
+	memcpy(&lq, priv->stations[sta_id].lq, sizeof(lq));
+
+	active = priv->stations[sta_id].used & IWL_STA_UCODE_ACTIVE;
+	priv->stations[sta_id].used &= ~IWL_STA_DRIVER_ACTIVE;
+	spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+	if (active) {
+		ret = iwl_send_remove_station(
+			priv, priv->stations[sta_id].sta.sta.addr,
+			sta_id, true);
+		if (ret)
+			IWL_ERR(priv, "failed to remove STA %pM (%d)\n",
+				priv->stations[sta_id].sta.sta.addr, ret);
+	}
+	spin_lock_irqsave(&priv->sta_lock, flags);
+	priv->stations[sta_id].used |= IWL_STA_DRIVER_ACTIVE;
+	spin_unlock_irqrestore(&priv->sta_lock, flags);
+
+	ret = iwl_send_add_sta(priv, &sta_cmd, CMD_SYNC);
+	if (ret)
+		IWL_ERR(priv, "failed to re-add STA %pM (%d)\n",
+			priv->stations[sta_id].sta.sta.addr, ret);
+	iwl_send_lq_cmd(priv, ctx, &lq, CMD_SYNC, true);
+}
+EXPORT_SYMBOL(iwl_reprogram_ap_sta);
+
 int iwl_get_free_ucode_key_index(struct iwl_priv *priv)
 {
 	int i;
@@ -736,6 +782,14 @@ int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
 	if (WARN_ON(lq->sta_id == IWL_INVALID_STATION))
 		return -EINVAL;
 
+
+	spin_lock_irqsave(&priv->sta_lock, flags_spin);
+	if (!(priv->stations[lq->sta_id].used & IWL_STA_DRIVER_ACTIVE)) {
+		spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+		return -EINVAL;
+	}
+	spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
+
 	iwl_dump_lq_cmd(priv, lq);
 	BUG_ON(init && (cmd.flags & CMD_ASYNC));
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.h b/drivers/net/wireless/iwlwifi/iwl-sta.h
index 06475872eee..206f1e1a0ca 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.h
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.h
@@ -63,6 +63,7 @@ u8 iwl_prep_station(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
 
 int iwl_send_lq_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
 		    struct iwl_link_quality_cmd *lq, u8 flags, bool init);
+void iwl_reprogram_ap_sta(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
 
 /**
  * iwl_clear_driver_stations - clear knowledge of all stations from driver
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 7261ee49f28..073b6ce6141 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -49,30 +49,39 @@ void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 	if (txq->need_update == 0)
 		return;
 
-	/* if we're trying to save power */
-	if (test_bit(STATUS_POWER_PMI, &priv->status)) {
-		/* wake up nic if it's powered down ...
-		 * uCode will wake up, and interrupt us again, so next
-		 * time we'll skip this part. */
-		reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
-
-		if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
-			IWL_DEBUG_INFO(priv, "Tx queue %d requesting wakeup, GP1 = 0x%x\n",
-				      txq_id, reg);
-			iwl_set_bit(priv, CSR_GP_CNTRL,
-				    CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-			return;
-		}
-
-		iwl_write_direct32(priv, HBUS_TARG_WRPTR,
-				     txq->q.write_ptr | (txq_id << 8));
-
-	/* else not in power-save mode, uCode will never sleep when we're
-	 * trying to tx (during RFKILL, we're not trying to tx). */
-	} else
+	if (priv->cfg->base_params->shadow_reg_enable) {
+		/* shadow register enabled */
 		iwl_write32(priv, HBUS_TARG_WRPTR,
 			    txq->q.write_ptr | (txq_id << 8));
+	} else {
+		/* if we're trying to save power */
+		if (test_bit(STATUS_POWER_PMI, &priv->status)) {
+			/* wake up nic if it's powered down ...
+			 * uCode will wake up, and interrupt us again, so next
+			 * time we'll skip this part. */
+			reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
+
+			if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+				IWL_DEBUG_INFO(priv,
+					"Tx queue %d requesting wakeup,"
+					" GP1 = 0x%x\n", txq_id, reg);
+				iwl_set_bit(priv, CSR_GP_CNTRL,
+					CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+				return;
+			}
+
+			iwl_write_direct32(priv, HBUS_TARG_WRPTR,
+				     txq->q.write_ptr | (txq_id << 8));
 
+		/*
+		 * else not in power-save mode,
+		 * uCode will never sleep when we're
+		 * trying to tx (during RFKILL, we're not trying to tx).
+		 */
+		} else
+			iwl_write32(priv, HBUS_TARG_WRPTR,
+				    txq->q.write_ptr | (txq_id << 8));
+	}
 	txq->need_update = 0;
 }
 EXPORT_SYMBOL(iwl_txq_update_write_ptr);
@@ -254,8 +263,6 @@ static int iwl_queue_init(struct iwl_priv *priv, struct iwl_queue *q,
 		q->high_mark = 2;
 
 	q->write_ptr = q->read_ptr = 0;
-	q->last_read_ptr = 0;
-	q->repeat_same_read_ptr = 0;
 
 	return 0;
 }
@@ -350,13 +357,12 @@ int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 	txq->need_update = 0;
 
 	/*
-	 * Aggregation TX queues will get their ID when aggregation begins;
-	 * they overwrite the setting done here. The command FIFO doesn't
-	 * need an swq_id so don't set one to catch errors, all others can
-	 * be set up to the identity mapping.
+	 * For the default queues 0-3, set up the swq_id
+	 * already -- all others need to get one later
+	 * (if they need one at all).
 	 */
-	if (txq_id != priv->cmd_queue)
-		txq->swq_id = txq_id;
+	if (txq_id < 4)
+		iwl_set_swq_id(txq, txq_id, txq_id);
 
 	/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
 	 * iwl_queue_inc_wrap and iwl_queue_dec_wrap are broken. */
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 8f8c4b73f8b..371abbf60ea 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -61,6 +61,7 @@
 #include "iwl-helpers.h"
 #include "iwl-dev.h"
 #include "iwl-spectrum.h"
+#include "iwl-legacy.h"
 
 /*
  * module name, copyright, version, etc.
@@ -474,7 +475,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	dma_addr_t phys_addr;
 	dma_addr_t txcmd_phys;
 	int txq_id = skb_get_queue_mapping(skb);
-	u16 len, idx, len_org, hdr_len; /* TODO: len_org is not used */
+	u16 len, idx, hdr_len;
 	u8 id;
 	u8 unicast;
 	u8 sta_id;
@@ -611,15 +612,8 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	 */
 	len = sizeof(struct iwl3945_tx_cmd) +
 			sizeof(struct iwl_cmd_header) + hdr_len;
-
-	len_org = len;
 	len = (len + 3) & ~3;
 
-	if (len_org != len)
-		len_org = 1;
-	else
-		len_org = 0;
-
 	/* Physical address of this Tx command's header (not MAC header!),
 	 * within command buffer array. */
 	txcmd_phys = pci_map_single(priv->pci_dev, &out_cmd->hdr,
@@ -661,7 +655,7 @@ static int iwl3945_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 			spin_unlock_irqrestore(&priv->lock, flags);
 		}
 
-		iwl_stop_queue(priv, skb_get_queue_mapping(skb));
+		iwl_stop_queue(priv, txq);
 	}
 
 	return 0;
@@ -2515,13 +2509,8 @@ static void iwl3945_alive_start(struct iwl_priv *priv)
 	/* After the ALIVE response, we can send commands to 3945 uCode */
 	set_bit(STATUS_ALIVE, &priv->status);
 
-	if (priv->cfg->ops->lib->recover_from_tx_stall) {
-		/* Enable timer to monitor the driver queues */
-		mod_timer(&priv->monitor_recover,
-			jiffies +
-			msecs_to_jiffies(
-			  priv->cfg->base_params->monitor_recover_period));
-	}
+	/* Enable watchdog to monitor the driver tx queues */
+	iwl_setup_watchdog(priv);
 
 	if (iwl_is_rfkill(priv))
 		return;
@@ -2578,8 +2567,7 @@ static void __iwl3945_down(struct iwl_priv *priv)
 
 	/* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
 	 * to prevent rearm timer */
-	if (priv->cfg->ops->lib->recover_from_tx_stall)
-		del_timer_sync(&priv->monitor_recover);
+	del_timer_sync(&priv->watchdog);
 
 	/* Station information will now be cleared in device */
 	iwl_clear_ucode_stations(priv, NULL);
@@ -3057,22 +3045,22 @@ static void iwl3945_bg_rx_replenish(struct work_struct *data)
 	mutex_unlock(&priv->mutex);
 }
 
-void iwl3945_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif)
+void iwl3945_post_associate(struct iwl_priv *priv)
 {
 	int rc = 0;
 	struct ieee80211_conf *conf = NULL;
 	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
 
-	if (!vif || !priv->is_open)
+	if (!ctx->vif || !priv->is_open)
 		return;
 
-	if (vif->type == NL80211_IFTYPE_AP) {
+	if (ctx->vif->type == NL80211_IFTYPE_AP) {
 		IWL_ERR(priv, "%s Should not be called in AP mode\n", __func__);
 		return;
 	}
 
 	IWL_DEBUG_ASSOC(priv, "Associated as %d to: %pM\n",
-			vif->bss_conf.aid, ctx->active.bssid_addr);
+			ctx->vif->bss_conf.aid, ctx->active.bssid_addr);
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
@@ -3091,18 +3079,18 @@ void iwl3945_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif)
 
 	ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
 
-	ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
+	ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid);
 
 	IWL_DEBUG_ASSOC(priv, "assoc id %d beacon interval %d\n",
-			vif->bss_conf.aid, vif->bss_conf.beacon_int);
+			ctx->vif->bss_conf.aid, ctx->vif->bss_conf.beacon_int);
 
-	if (vif->bss_conf.use_short_preamble)
+	if (ctx->vif->bss_conf.use_short_preamble)
 		ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
 	else
 		ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
 
 	if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
-		if (vif->bss_conf.use_short_slot)
+		if (ctx->vif->bss_conf.use_short_slot)
 			ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
 		else
 			ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
@@ -3110,7 +3098,7 @@ void iwl3945_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif)
 
 	iwl3945_commit_rxon(priv, ctx);
 
-	switch (vif->type) {
+	switch (ctx->vif->type) {
 	case NL80211_IFTYPE_STATION:
 		iwl3945_rate_scale_init(priv->hw, IWL_AP_ID);
 		break;
@@ -3119,7 +3107,7 @@ void iwl3945_post_associate(struct iwl_priv *priv, struct ieee80211_vif *vif)
 		break;
 	default:
 		IWL_ERR(priv, "%s Should not be called in %d mode\n",
-			__func__, vif->type);
+			__func__, ctx->vif->type);
 		break;
 	}
 }
@@ -3234,9 +3222,10 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	return NETDEV_TX_OK;
 }
 
-void iwl3945_config_ap(struct iwl_priv *priv, struct ieee80211_vif *vif)
+void iwl3945_config_ap(struct iwl_priv *priv)
 {
 	struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
+	struct ieee80211_vif *vif = ctx->vif;
 	int rc = 0;
 
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
@@ -3407,9 +3396,9 @@ static void iwl3945_configure_filter(struct ieee80211_hw *hw,
 	ctx->staging.filter_flags |= filter_or;
 
 	/*
-	 * Committing directly here breaks for some reason,
-	 * but we'll eventually commit the filter flags
-	 * change anyway.
+	 * Not committing directly because hardware can perform a scan,
+	 * but even if hw is ready, committing here breaks for some reason,
+	 * we'll eventually commit the filter flags change anyway.
 	 */
 
 	mutex_unlock(&priv->mutex);
@@ -3780,12 +3769,9 @@ static void iwl3945_setup_deferred_work(struct iwl_priv *priv)
 
 	iwl3945_hw_setup_deferred_work(priv);
 
-	if (priv->cfg->ops->lib->recover_from_tx_stall) {
-		init_timer(&priv->monitor_recover);
-		priv->monitor_recover.data = (unsigned long)priv;
-		priv->monitor_recover.function =
-			priv->cfg->ops->lib->recover_from_tx_stall;
-	}
+	init_timer(&priv->watchdog);
+	priv->watchdog.data = (unsigned long)priv;
+	priv->watchdog.function = iwl_bg_watchdog;
 
 	tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
 		     iwl3945_irq_tasklet, (unsigned long)priv);
@@ -3824,18 +3810,19 @@ static struct attribute_group iwl3945_attribute_group = {
 	.attrs = iwl3945_sysfs_entries,
 };
 
-static struct ieee80211_ops iwl3945_hw_ops = {
+struct ieee80211_ops iwl3945_hw_ops = {
 	.tx = iwl3945_mac_tx,
 	.start = iwl3945_mac_start,
 	.stop = iwl3945_mac_stop,
 	.add_interface = iwl_mac_add_interface,
 	.remove_interface = iwl_mac_remove_interface,
-	.config = iwl_mac_config,
+	.change_interface = iwl_mac_change_interface,
+	.config = iwl_legacy_mac_config,
 	.configure_filter = iwl3945_configure_filter,
 	.set_key = iwl3945_mac_set_key,
 	.conf_tx = iwl_mac_conf_tx,
-	.reset_tsf = iwl_mac_reset_tsf,
-	.bss_info_changed = iwl_bss_info_changed,
+	.reset_tsf = iwl_legacy_mac_reset_tsf,
+	.bss_info_changed = iwl_legacy_mac_bss_info_changed,
 	.hw_scan = iwl_mac_hw_scan,
 	.sta_add = iwl3945_mac_sta_add,
 	.sta_remove = iwl_mac_sta_remove,
@@ -3865,7 +3852,15 @@ static int iwl3945_init_drv(struct iwl_priv *priv)
 	priv->iw_mode = NL80211_IFTYPE_STATION;
 	priv->missed_beacon_threshold = IWL_MISSED_BEACON_THRESHOLD_DEF;
 
+	/* initialize force reset */
+	priv->force_reset[IWL_RF_RESET].reset_duration =
+		IWL_DELAY_NEXT_FORCE_RF_RESET;
+	priv->force_reset[IWL_FW_RESET].reset_duration =
+		IWL_DELAY_NEXT_FORCE_FW_RELOAD;
+
+
 	priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
+	priv->tx_power_next = IWL_DEFAULT_TX_POWER;
 
 	if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
 		IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",
@@ -3965,7 +3960,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	/* mac80211 allocates memory for this device instance, including
 	 *   space for this driver's private structure */
-	hw = iwl_alloc_all(cfg, &iwl3945_hw_ops);
+	hw = iwl_alloc_all(cfg);
 	if (hw == NULL) {
 		pr_err("Can not allocate network device\n");
 		err = -ENOMEM;
@@ -4000,7 +3995,8 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	 * "the hard way", rather than using device's scan.
 	 */
 	if (iwl3945_mod_params.disable_hw_scan) {
-		IWL_ERR(priv, "sw scan support is deprecated\n");
+		dev_printk(KERN_DEBUG, &(pdev->dev),
+			"sw scan support is deprecated\n");
 		iwl3945_hw_ops.hw_scan = NULL;
 	}
 
@@ -4116,7 +4112,7 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	pci_enable_msi(priv->pci_dev);
 
-	err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr,
+	err = request_irq(priv->pci_dev->irq, priv->cfg->ops->lib->isr_ops.isr,
 			  IRQF_SHARED, DRV_NAME, priv);
 	if (err) {
 		IWL_ERR(priv, "Error allocating IRQ %d\n", priv->pci_dev->irq);
@@ -4274,10 +4270,7 @@ static struct pci_driver iwl3945_driver = {
 	.id_table = iwl3945_hw_card_ids,
 	.probe = iwl3945_pci_probe,
 	.remove = __devexit_p(iwl3945_pci_remove),
-#ifdef CONFIG_PM
-	.suspend = iwl_pci_suspend,
-	.resume = iwl_pci_resume,
-#endif
+	.driver.pm = IWL_PM_OPS,
 };
 
 static int __init iwl3945_init(void)
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
index c6c0eff9b5e..5a4982271e9 100644
--- a/drivers/net/wireless/iwmc3200wifi/cfg80211.c
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
@@ -225,7 +225,8 @@ static int iwm_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
 
 static int iwm_cfg80211_set_default_key(struct wiphy *wiphy,
 					struct net_device *ndev,
-					u8 key_index)
+					u8 key_index, bool unicast,
+					bool multicast)
 {
 	struct iwm_priv *iwm = ndev_to_iwm(ndev);
 
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 330c7d9cf10..50dee6a0a5c 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -908,7 +908,7 @@ int iwm_scan_ssids(struct iwm_priv *iwm, struct cfg80211_ssid *ssids,
 		return ret;
 	}
 
-	iwm->scan_id = iwm->scan_id++ % IWM_SCAN_ID_MAX;
+	iwm->scan_id = (iwm->scan_id + 1) % IWM_SCAN_ID_MAX;
 
 	return 0;
 }
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 5046a000503..698a1f7694e 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -9,8 +9,6 @@
 #include <linux/sched.h>
 #include <linux/wait.h>
 #include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
 #include <linux/ieee80211.h>
 #include <net/cfg80211.h>
 #include <asm/unaligned.h>
@@ -619,7 +617,7 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy,
 				     print_ssid(ssid_buf, ssid, ssid_len),
 				     LBS_SCAN_RSSI_TO_MBM(rssi)/100);
 
-			if (channel ||
+			if (channel &&
 			    !(channel->flags & IEEE80211_CHAN_DISABLED))
 				cfg80211_inform_bss(wiphy, channel,
 					bssid, le64_to_cpu(*(__le64 *)tsfdesc),
@@ -700,8 +698,9 @@ static void lbs_scan_worker(struct work_struct *work)
 
 	if (priv->scan_channel < priv->scan_req->n_channels) {
 		cancel_delayed_work(&priv->scan_work);
-		queue_delayed_work(priv->work_thread, &priv->scan_work,
-			msecs_to_jiffies(300));
+		if (!priv->stopping)
+			queue_delayed_work(priv->work_thread, &priv->scan_work,
+				msecs_to_jiffies(300));
 	}
 
 	/* This is the final data we are about to send */
@@ -1423,7 +1422,8 @@ static int lbs_cfg_disconnect(struct wiphy *wiphy, struct net_device *dev,
 
 static int lbs_cfg_set_default_key(struct wiphy *wiphy,
 				   struct net_device *netdev,
-				   u8 key_index)
+				   u8 key_index, bool unicast,
+				   bool multicast)
 {
 	struct lbs_private *priv = wiphy_priv(wiphy);
 
@@ -2061,7 +2061,7 @@ static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv)
 	};
 
 	/* Section 5.17.2 */
-	static struct region_code_mapping regmap[] = {
+	static const struct region_code_mapping regmap[] = {
 		{"US ", 0x10}, /* US FCC */
 		{"CA ", 0x20}, /* Canada */
 		{"EU ", 0x30}, /* ETSI   */
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 70745928f3f..78c4da150a7 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -177,6 +177,14 @@ int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria,
 	struct cmd_ds_host_sleep cmd_config;
 	int ret;
 
+	/*
+	 * Certain firmware versions do not support EHS_REMOVE_WAKEUP command
+	 * and the card will return a failure.  Since we need to be
+	 * able to reset the mask, in those cases we set a 0 mask instead.
+	 */
+	if (criteria == EHS_REMOVE_WAKEUP && !priv->ehs_remove_supported)
+		criteria = 0;
+
 	cmd_config.hdr.size = cpu_to_le16(sizeof(cmd_config));
 	cmd_config.criteria = cpu_to_le32(criteria);
 	cmd_config.gpio = priv->wol_gpio;
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index f062ed58390..18dd9a02c45 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -36,6 +36,7 @@ struct lbs_private {
 	/* CFG80211 */
 	struct wireless_dev *wdev;
 	bool wiphy_registered;
+	bool stopping;
 	struct cfg80211_scan_request *scan_req;
 	u8 assoc_bss[ETH_ALEN];
 	u8 disassoc_reason;
@@ -137,6 +138,7 @@ struct lbs_private {
 	uint32_t wol_criteria;
 	uint8_t wol_gpio;
 	uint8_t wol_gap;
+	bool ehs_remove_supported;
 
 	/* Transmitting */
 	int tx_pending_len;		/* -1 while building packet */
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index e5685dc317a..b4de0ca10fe 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -1170,7 +1170,6 @@ static void if_sdio_remove(struct sdio_func *func)
 	lbs_deb_sdio("call remove card\n");
 	lbs_stop_card(card->priv);
 	lbs_remove_card(card->priv);
-	card->priv->surpriseremoved = 1;
 
 	flush_workqueue(card->workqueue);
 	destroy_workqueue(card->workqueue);
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 79bcb4e5d2c..00600239a05 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -784,7 +784,7 @@ static int lbs_spi_thread(void *data)
 				up(&card->spi_thread_terminated);
 				do_exit(0);
 			}
-		} while (err == EINTR);
+		} while (err == -EINTR);
 
 		/* Read the host interrupt status register to see what we
 		 * can do. */
@@ -1055,7 +1055,6 @@ static int __devexit libertas_spi_remove(struct spi_device *spi)
 	lbs_stop_card(priv);
 	lbs_remove_card(priv); /* will call free_netdev */
 
-	priv->surpriseremoved = 1;
 	free_irq(spi->irq, card);
 	if_spi_terminate_spi_thread(card);
 	if (card->pdata->teardown)
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index efaf8503220..6524c70363d 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -345,6 +345,13 @@ static int if_usb_probe(struct usb_interface *intf,
 	if (device_create_file(&priv->dev->dev, &dev_attr_lbs_flash_boot2))
 		lbs_pr_err("cannot register lbs_flash_boot2 attribute\n");
 
+	/*
+	 * EHS_REMOVE_WAKEUP is not supported on all versions of the firmware.
+	 */
+	priv->wol_criteria = EHS_REMOVE_WAKEUP;
+	if (lbs_host_sleep_cfg(priv, priv->wol_criteria, NULL))
+		priv->ehs_remove_supported = false;
+
 	return 0;
 
 err_start_card:
@@ -1090,12 +1097,6 @@ static int if_usb_suspend(struct usb_interface *intf, pm_message_t message)
 	if (priv->psstate != PS_STATE_FULL_POWER)
 		return -1;
 
-	if (priv->wol_criteria == EHS_REMOVE_WAKEUP) {
-		lbs_pr_info("Suspend attempt without "
-						"configuring wake params!\n");
-		return -ENOSYS;
-	}
-
 	ret = lbs_suspend(priv);
 	if (ret)
 		goto out;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 47ce5a6ba12..6836a6dd985 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -104,6 +104,7 @@ static int lbs_dev_open(struct net_device *dev)
 	lbs_deb_enter(LBS_DEB_NET);
 
 	spin_lock_irq(&priv->driver_lock);
+	priv->stopping = false;
 
 	if (priv->connect_status == LBS_CONNECTED)
 		netif_carrier_on(dev);
@@ -131,10 +132,16 @@ static int lbs_eth_stop(struct net_device *dev)
 	lbs_deb_enter(LBS_DEB_NET);
 
 	spin_lock_irq(&priv->driver_lock);
+	priv->stopping = true;
 	netif_stop_queue(dev);
 	spin_unlock_irq(&priv->driver_lock);
 
 	schedule_work(&priv->mcast_work);
+	cancel_delayed_work_sync(&priv->scan_work);
+	if (priv->scan_req) {
+		cfg80211_scan_done(priv->scan_req, false);
+		priv->scan_req = NULL;
+	}
 
 	lbs_deb_leave(LBS_DEB_NET);
 	return 0;
@@ -844,9 +851,10 @@ struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
 	priv->work_thread = create_singlethread_workqueue("lbs_worker");
 	INIT_WORK(&priv->mcast_work, lbs_set_mcast_worker);
 
-	priv->wol_criteria = 0xffffffff;
+	priv->wol_criteria = EHS_REMOVE_WAKEUP;
 	priv->wol_gpio = 0xff;
 	priv->wol_gap = 20;
+	priv->ehs_remove_supported = true;
 
 	goto done;
 
@@ -908,8 +916,6 @@ void lbs_remove_card(struct lbs_private *priv)
 
 	lbs_free_adapter(priv);
 	lbs_cfg_free(priv);
-
-	priv->dev = NULL;
 	free_netdev(dev);
 
 	lbs_deb_leave(LBS_DEB_MAIN);
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index a4d0bca9ef2..a2b1df21d28 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -55,7 +55,9 @@ int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *skb)
 	struct rxpd *p_rx_pd;
 	int hdrchop;
 	struct ethhdr *p_ethhdr;
-	const u8 rfc1042_eth_hdr[] = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
+	static const u8 rfc1042_eth_hdr[] = {
+		0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00
+	};
 
 	lbs_deb_enter(LBS_DEB_RX);
 
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 7eaaa3bab54..454f045ddff 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -309,6 +309,8 @@ struct mac80211_hwsim_data {
 	 */
 	u64 group;
 	struct dentry *debugfs_group;
+
+	int power_level;
 };
 
 
@@ -497,7 +499,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,
 	rx_status.band = data->channel->band;
 	rx_status.rate_idx = info->control.rates[0].idx;
 	/* TODO: simulate real signal strength (and optional packet loss) */
-	rx_status.signal = -50;
+	rx_status.signal = data->power_level - 50;
 
 	if (data->ps != PS_DISABLED)
 		hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
@@ -698,6 +700,7 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed)
 	data->idle = !!(conf->flags & IEEE80211_CONF_IDLE);
 
 	data->channel = conf->channel;
+	data->power_level = conf->power_level;
 	if (!data->started || !data->beacon_int)
 		del_timer(&data->beacon_timer);
 	else
diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c
index f152a25be59..9ecf8407cb1 100644
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
@@ -29,6 +29,12 @@
 #define MWL8K_NAME	KBUILD_MODNAME
 #define MWL8K_VERSION	"0.12"
 
+/* Module parameters */
+static unsigned ap_mode_default;
+module_param(ap_mode_default, bool, 0);
+MODULE_PARM_DESC(ap_mode_default,
+		 "Set to 1 to make ap mode the default instead of sta mode");
+
 /* Register definitions */
 #define MWL8K_HIU_GEN_PTR			0x00000c10
 #define  MWL8K_MODE_STA				 0x0000005a
@@ -92,8 +98,10 @@ struct rxd_ops {
 struct mwl8k_device_info {
 	char *part_name;
 	char *helper_image;
-	char *fw_image;
+	char *fw_image_sta;
+	char *fw_image_ap;
 	struct rxd_ops *ap_rxd_ops;
+	u32 fw_api_ap;
 };
 
 struct mwl8k_rx_queue {
@@ -136,8 +144,8 @@ struct mwl8k_priv {
 	void __iomem *regs;
 
 	/* firmware */
-	struct firmware *fw_helper;
-	struct firmware *fw_ucode;
+	const struct firmware *fw_helper;
+	const struct firmware *fw_ucode;
 
 	/* hardware/firmware parameters */
 	bool ap_fw;
@@ -210,6 +218,18 @@ struct mwl8k_priv {
 
 	/* Most recently reported noise in dBm */
 	s8 noise;
+
+	/*
+	 * preserve the queue configurations so they can be restored if/when
+	 * the firmware image is swapped.
+	 */
+	struct ieee80211_tx_queue_params wmm_params[MWL8K_TX_QUEUES];
+
+	/* async firmware loading state */
+	unsigned fw_state;
+	char *fw_pref;
+	char *fw_alt;
+	struct completion firmware_loading_complete;
 };
 
 /* Per interface specific private data */
@@ -285,8 +305,9 @@ static const struct ieee80211_rate mwl8k_rates_50[] = {
 };
 
 /* Set or get info from Firmware */
-#define MWL8K_CMD_SET			0x0001
 #define MWL8K_CMD_GET			0x0000
+#define MWL8K_CMD_SET			0x0001
+#define MWL8K_CMD_SET_LIST		0x0002
 
 /* Firmware command codes */
 #define MWL8K_CMD_CODE_DNLD		0x0001
@@ -296,6 +317,7 @@ static const struct ieee80211_rate mwl8k_rates_50[] = {
 #define MWL8K_CMD_GET_STAT		0x0014
 #define MWL8K_CMD_RADIO_CONTROL		0x001c
 #define MWL8K_CMD_RF_TX_POWER		0x001e
+#define MWL8K_CMD_TX_POWER		0x001f
 #define MWL8K_CMD_RF_ANTENNA		0x0020
 #define MWL8K_CMD_SET_BEACON		0x0100		/* per-vif */
 #define MWL8K_CMD_SET_PRE_SCAN		0x0107
@@ -333,6 +355,7 @@ static const char *mwl8k_cmd_name(__le16 cmd, char *buf, int bufsize)
 		MWL8K_CMDNAME(GET_STAT);
 		MWL8K_CMDNAME(RADIO_CONTROL);
 		MWL8K_CMDNAME(RF_TX_POWER);
+		MWL8K_CMDNAME(TX_POWER);
 		MWL8K_CMDNAME(RF_ANTENNA);
 		MWL8K_CMDNAME(SET_BEACON);
 		MWL8K_CMDNAME(SET_PRE_SCAN);
@@ -372,7 +395,7 @@ static void mwl8k_hw_reset(struct mwl8k_priv *priv)
 }
 
 /* Release fw image */
-static void mwl8k_release_fw(struct firmware **fw)
+static void mwl8k_release_fw(const struct firmware **fw)
 {
 	if (*fw == NULL)
 		return;
@@ -386,37 +409,68 @@ static void mwl8k_release_firmware(struct mwl8k_priv *priv)
 	mwl8k_release_fw(&priv->fw_helper);
 }
 
+/* states for asynchronous f/w loading */
+static void mwl8k_fw_state_machine(const struct firmware *fw, void *context);
+enum {
+	FW_STATE_INIT = 0,
+	FW_STATE_LOADING_PREF,
+	FW_STATE_LOADING_ALT,
+	FW_STATE_ERROR,
+};
+
 /* Request fw image */
 static int mwl8k_request_fw(struct mwl8k_priv *priv,
-			    const char *fname, struct firmware **fw)
+			    const char *fname, const struct firmware **fw,
+			    bool nowait)
 {
 	/* release current image */
 	if (*fw != NULL)
 		mwl8k_release_fw(fw);
 
-	return request_firmware((const struct firmware **)fw,
-				fname, &priv->pdev->dev);
+	if (nowait)
+		return request_firmware_nowait(THIS_MODULE, 1, fname,
+					       &priv->pdev->dev, GFP_KERNEL,
+					       priv, mwl8k_fw_state_machine);
+	else
+		return request_firmware(fw, fname, &priv->pdev->dev);
 }
 
-static int mwl8k_request_firmware(struct mwl8k_priv *priv)
+static int mwl8k_request_firmware(struct mwl8k_priv *priv, char *fw_image,
+				  bool nowait)
 {
 	struct mwl8k_device_info *di = priv->device_info;
 	int rc;
 
 	if (di->helper_image != NULL) {
-		rc = mwl8k_request_fw(priv, di->helper_image, &priv->fw_helper);
-		if (rc) {
-			printk(KERN_ERR "%s: Error requesting helper "
-			       "firmware file %s\n", pci_name(priv->pdev),
-			       di->helper_image);
+		if (nowait)
+			rc = mwl8k_request_fw(priv, di->helper_image,
+					      &priv->fw_helper, true);
+		else
+			rc = mwl8k_request_fw(priv, di->helper_image,
+					      &priv->fw_helper, false);
+		if (rc)
+			printk(KERN_ERR "%s: Error requesting helper fw %s\n",
+			       pci_name(priv->pdev), di->helper_image);
+
+		if (rc || nowait)
 			return rc;
-		}
 	}
 
-	rc = mwl8k_request_fw(priv, di->fw_image, &priv->fw_ucode);
+	if (nowait) {
+		/*
+		 * if we get here, no helper image is needed.  Skip the
+		 * FW_STATE_INIT state.
+		 */
+		priv->fw_state = FW_STATE_LOADING_PREF;
+		rc = mwl8k_request_fw(priv, fw_image,
+				      &priv->fw_ucode,
+				      true);
+	} else
+		rc = mwl8k_request_fw(priv, fw_image,
+				      &priv->fw_ucode, false);
 	if (rc) {
 		printk(KERN_ERR "%s: Error requesting firmware file %s\n",
-		       pci_name(priv->pdev), di->fw_image);
+		       pci_name(priv->pdev), fw_image);
 		mwl8k_release_fw(&priv->fw_helper);
 		return rc;
 	}
@@ -577,12 +631,12 @@ static int mwl8k_feed_fw_image(struct mwl8k_priv *priv,
 static int mwl8k_load_firmware(struct ieee80211_hw *hw)
 {
 	struct mwl8k_priv *priv = hw->priv;
-	struct firmware *fw = priv->fw_ucode;
+	const struct firmware *fw = priv->fw_ucode;
 	int rc;
 	int loops;
 
 	if (!memcmp(fw->data, "\x01\x00\x00\x00", 4)) {
-		struct firmware *helper = priv->fw_helper;
+		const struct firmware *helper = priv->fw_helper;
 
 		if (helper == NULL) {
 			printk(KERN_ERR "%s: helper image needed but none "
@@ -1811,6 +1865,7 @@ struct mwl8k_cmd_get_hw_spec_ap {
 	__le32 wcbbase1;
 	__le32 wcbbase2;
 	__le32 wcbbase3;
+	__le32 fw_api_version;
 } __packed;
 
 static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw)
@@ -1818,6 +1873,7 @@ static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw)
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_cmd_get_hw_spec_ap *cmd;
 	int rc;
+	u32 api_version;
 
 	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
 	if (cmd == NULL)
@@ -1834,6 +1890,16 @@ static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw)
 	if (!rc) {
 		int off;
 
+		api_version = le32_to_cpu(cmd->fw_api_version);
+		if (priv->device_info->fw_api_ap != api_version) {
+			printk(KERN_ERR "%s: Unsupported fw API version for %s."
+			       "  Expected %d got %d.\n", MWL8K_NAME,
+			       priv->device_info->part_name,
+			       priv->device_info->fw_api_ap,
+			       api_version);
+			rc = -EINVAL;
+			goto done;
+		}
 		SET_IEEE80211_PERM_ADDR(hw, cmd->perm_addr);
 		priv->num_mcaddrs = le16_to_cpu(cmd->num_mcaddrs);
 		priv->fw_rev = le32_to_cpu(cmd->fw_rev);
@@ -1861,6 +1927,7 @@ static int mwl8k_cmd_get_hw_spec_ap(struct ieee80211_hw *hw)
 		iowrite32(priv->txq[3].txd_dma, priv->sram + off);
 	}
 
+done:
 	kfree(cmd);
 	return rc;
 }
@@ -2084,7 +2151,7 @@ mwl8k_set_radio_preamble(struct ieee80211_hw *hw, bool short_preamble)
 /*
  * CMD_RF_TX_POWER.
  */
-#define MWL8K_TX_POWER_LEVEL_TOTAL	8
+#define MWL8K_RF_TX_POWER_LEVEL_TOTAL	8
 
 struct mwl8k_cmd_rf_tx_power {
 	struct mwl8k_cmd_pkt header;
@@ -2092,7 +2159,7 @@ struct mwl8k_cmd_rf_tx_power {
 	__le16 support_level;
 	__le16 current_level;
 	__le16 reserved;
-	__le16 power_level_list[MWL8K_TX_POWER_LEVEL_TOTAL];
+	__le16 power_level_list[MWL8K_RF_TX_POWER_LEVEL_TOTAL];
 } __packed;
 
 static int mwl8k_cmd_rf_tx_power(struct ieee80211_hw *hw, int dBm)
@@ -2116,6 +2183,65 @@ static int mwl8k_cmd_rf_tx_power(struct ieee80211_hw *hw, int dBm)
 }
 
 /*
+ * CMD_TX_POWER.
+ */
+#define MWL8K_TX_POWER_LEVEL_TOTAL      12
+
+struct mwl8k_cmd_tx_power {
+	struct mwl8k_cmd_pkt header;
+	__le16 action;
+	__le16 band;
+	__le16 channel;
+	__le16 bw;
+	__le16 sub_ch;
+	__le16 power_level_list[MWL8K_TX_POWER_LEVEL_TOTAL];
+} __attribute__((packed));
+
+static int mwl8k_cmd_tx_power(struct ieee80211_hw *hw,
+				     struct ieee80211_conf *conf,
+				     unsigned short pwr)
+{
+	struct ieee80211_channel *channel = conf->channel;
+	struct mwl8k_cmd_tx_power *cmd;
+	int rc;
+	int i;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (cmd == NULL)
+		return -ENOMEM;
+
+	cmd->header.code = cpu_to_le16(MWL8K_CMD_TX_POWER);
+	cmd->header.length = cpu_to_le16(sizeof(*cmd));
+	cmd->action = cpu_to_le16(MWL8K_CMD_SET_LIST);
+
+	if (channel->band == IEEE80211_BAND_2GHZ)
+		cmd->band = cpu_to_le16(0x1);
+	else if (channel->band == IEEE80211_BAND_5GHZ)
+		cmd->band = cpu_to_le16(0x4);
+
+	cmd->channel = channel->hw_value;
+
+	if (conf->channel_type == NL80211_CHAN_NO_HT ||
+	    conf->channel_type == NL80211_CHAN_HT20) {
+		cmd->bw = cpu_to_le16(0x2);
+	} else {
+		cmd->bw = cpu_to_le16(0x4);
+		if (conf->channel_type == NL80211_CHAN_HT40MINUS)
+			cmd->sub_ch = cpu_to_le16(0x3);
+		else if (conf->channel_type == NL80211_CHAN_HT40PLUS)
+			cmd->sub_ch = cpu_to_le16(0x1);
+	}
+
+	for (i = 0; i < MWL8K_TX_POWER_LEVEL_TOTAL; i++)
+		cmd->power_level_list[i] = cpu_to_le16(pwr);
+
+	rc = mwl8k_post_cmd(hw, &cmd->header);
+	kfree(cmd);
+
+	return rc;
+}
+
+/*
  * CMD_RF_ANTENNA.
  */
 struct mwl8k_cmd_rf_antenna {
@@ -3283,13 +3409,16 @@ static void mwl8k_stop(struct ieee80211_hw *hw)
 		mwl8k_txq_reclaim(hw, i, INT_MAX, 1);
 }
 
+static int mwl8k_reload_firmware(struct ieee80211_hw *hw, char *fw_image);
+
 static int mwl8k_add_interface(struct ieee80211_hw *hw,
 			       struct ieee80211_vif *vif)
 {
 	struct mwl8k_priv *priv = hw->priv;
 	struct mwl8k_vif *mwl8k_vif;
 	u32 macids_supported;
-	int macid;
+	int macid, rc;
+	struct mwl8k_device_info *di;
 
 	/*
 	 * Reject interface creation if sniffer mode is active, as
@@ -3302,12 +3431,28 @@ static int mwl8k_add_interface(struct ieee80211_hw *hw,
 		return -EINVAL;
 	}
 
-
+	di = priv->device_info;
 	switch (vif->type) {
 	case NL80211_IFTYPE_AP:
+		if (!priv->ap_fw && di->fw_image_ap) {
+			/* we must load the ap fw to meet this request */
+			if (!list_empty(&priv->vif_list))
+				return -EBUSY;
+			rc = mwl8k_reload_firmware(hw, di->fw_image_ap);
+			if (rc)
+				return rc;
+		}
 		macids_supported = priv->ap_macids_supported;
 		break;
 	case NL80211_IFTYPE_STATION:
+		if (priv->ap_fw && di->fw_image_sta) {
+			/* we must load the sta fw to meet this request */
+			if (!list_empty(&priv->vif_list))
+				return -EBUSY;
+			rc = mwl8k_reload_firmware(hw, di->fw_image_sta);
+			if (rc)
+				return rc;
+		}
 		macids_supported = priv->sta_macids_supported;
 		break;
 	default:
@@ -3377,15 +3522,19 @@ static int mwl8k_config(struct ieee80211_hw *hw, u32 changed)
 
 	if (conf->power_level > 18)
 		conf->power_level = 18;
-	rc = mwl8k_cmd_rf_tx_power(hw, conf->power_level);
-	if (rc)
-		goto out;
 
 	if (priv->ap_fw) {
+		rc = mwl8k_cmd_tx_power(hw, conf, conf->power_level);
+		if (rc)
+			goto out;
+
 		rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_RX, 0x7);
 		if (!rc)
 			rc = mwl8k_cmd_rf_antenna(hw, MWL8K_RF_ANTENNA_TX, 0x7);
 	} else {
+		rc = mwl8k_cmd_rf_tx_power(hw, conf->power_level);
+		if (rc)
+			goto out;
 		rc = mwl8k_cmd_mimo_config(hw, 0x7, 0x7);
 	}
 
@@ -3739,6 +3888,9 @@ static int mwl8k_conf_tx(struct ieee80211_hw *hw, u16 queue,
 
 	rc = mwl8k_fw_lock(hw);
 	if (!rc) {
+		BUG_ON(queue > MWL8K_TX_QUEUES - 1);
+		memcpy(&priv->wmm_params[queue], params, sizeof(*params));
+
 		if (!priv->wmm_enabled)
 			rc = mwl8k_cmd_set_wmm_mode(hw, 1);
 
@@ -3838,21 +3990,27 @@ enum {
 	MWL8366,
 };
 
+#define MWL8K_8366_AP_FW_API 1
+#define _MWL8K_8366_AP_FW(api) "mwl8k/fmimage_8366_ap-" #api ".fw"
+#define MWL8K_8366_AP_FW(api) _MWL8K_8366_AP_FW(api)
+
 static struct mwl8k_device_info mwl8k_info_tbl[] __devinitdata = {
 	[MWL8363] = {
 		.part_name	= "88w8363",
 		.helper_image	= "mwl8k/helper_8363.fw",
-		.fw_image	= "mwl8k/fmimage_8363.fw",
+		.fw_image_sta	= "mwl8k/fmimage_8363.fw",
 	},
 	[MWL8687] = {
 		.part_name	= "88w8687",
 		.helper_image	= "mwl8k/helper_8687.fw",
-		.fw_image	= "mwl8k/fmimage_8687.fw",
+		.fw_image_sta	= "mwl8k/fmimage_8687.fw",
 	},
 	[MWL8366] = {
 		.part_name	= "88w8366",
 		.helper_image	= "mwl8k/helper_8366.fw",
-		.fw_image	= "mwl8k/fmimage_8366.fw",
+		.fw_image_sta	= "mwl8k/fmimage_8366.fw",
+		.fw_image_ap	= MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API),
+		.fw_api_ap	= MWL8K_8366_AP_FW_API,
 		.ap_rxd_ops	= &rxd_8366_ap_ops,
 	},
 };
@@ -3863,6 +4021,7 @@ MODULE_FIRMWARE("mwl8k/helper_8687.fw");
 MODULE_FIRMWARE("mwl8k/fmimage_8687.fw");
 MODULE_FIRMWARE("mwl8k/helper_8366.fw");
 MODULE_FIRMWARE("mwl8k/fmimage_8366.fw");
+MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API));
 
 static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
 	{ PCI_VDEVICE(MARVELL, 0x2a0a), .driver_data = MWL8363, },
@@ -3876,94 +4035,133 @@ static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
 };
 MODULE_DEVICE_TABLE(pci, mwl8k_pci_id_table);
 
-static int __devinit mwl8k_probe(struct pci_dev *pdev,
-				 const struct pci_device_id *id)
+static int mwl8k_request_alt_fw(struct mwl8k_priv *priv)
 {
-	static int printed_version = 0;
-	struct ieee80211_hw *hw;
-	struct mwl8k_priv *priv;
 	int rc;
-	int i;
-
-	if (!printed_version) {
-		printk(KERN_INFO "%s version %s\n", MWL8K_DESC, MWL8K_VERSION);
-		printed_version = 1;
-	}
-
-
-	rc = pci_enable_device(pdev);
+	printk(KERN_ERR "%s: Error requesting preferred fw %s.\n"
+	       "Trying alternative firmware %s\n", pci_name(priv->pdev),
+	       priv->fw_pref, priv->fw_alt);
+	rc = mwl8k_request_fw(priv, priv->fw_alt, &priv->fw_ucode, true);
 	if (rc) {
-		printk(KERN_ERR "%s: Cannot enable new PCI device\n",
-		       MWL8K_NAME);
+		printk(KERN_ERR "%s: Error requesting alt fw %s\n",
+		       pci_name(priv->pdev), priv->fw_alt);
 		return rc;
 	}
+	return 0;
+}
 
-	rc = pci_request_regions(pdev, MWL8K_NAME);
-	if (rc) {
-		printk(KERN_ERR "%s: Cannot obtain PCI resources\n",
-		       MWL8K_NAME);
-		goto err_disable_device;
-	}
-
-	pci_set_master(pdev);
-
-
-	hw = ieee80211_alloc_hw(sizeof(*priv), &mwl8k_ops);
-	if (hw == NULL) {
-		printk(KERN_ERR "%s: ieee80211 alloc failed\n", MWL8K_NAME);
-		rc = -ENOMEM;
-		goto err_free_reg;
-	}
+static int mwl8k_firmware_load_success(struct mwl8k_priv *priv);
+static void mwl8k_fw_state_machine(const struct firmware *fw, void *context)
+{
+	struct mwl8k_priv *priv = context;
+	struct mwl8k_device_info *di = priv->device_info;
+	int rc;
 
-	SET_IEEE80211_DEV(hw, &pdev->dev);
-	pci_set_drvdata(pdev, hw);
+	switch (priv->fw_state) {
+	case FW_STATE_INIT:
+		if (!fw) {
+			printk(KERN_ERR "%s: Error requesting helper fw %s\n",
+			       pci_name(priv->pdev), di->helper_image);
+			goto fail;
+		}
+		priv->fw_helper = fw;
+		rc = mwl8k_request_fw(priv, priv->fw_pref, &priv->fw_ucode,
+				      true);
+		if (rc && priv->fw_alt) {
+			rc = mwl8k_request_alt_fw(priv);
+			if (rc)
+				goto fail;
+			priv->fw_state = FW_STATE_LOADING_ALT;
+		} else if (rc)
+			goto fail;
+		else
+			priv->fw_state = FW_STATE_LOADING_PREF;
+		break;
 
-	priv = hw->priv;
-	priv->hw = hw;
-	priv->pdev = pdev;
-	priv->device_info = &mwl8k_info_tbl[id->driver_data];
+	case FW_STATE_LOADING_PREF:
+		if (!fw) {
+			if (priv->fw_alt) {
+				rc = mwl8k_request_alt_fw(priv);
+				if (rc)
+					goto fail;
+				priv->fw_state = FW_STATE_LOADING_ALT;
+			} else
+				goto fail;
+		} else {
+			priv->fw_ucode = fw;
+			rc = mwl8k_firmware_load_success(priv);
+			if (rc)
+				goto fail;
+			else
+				complete(&priv->firmware_loading_complete);
+		}
+		break;
 
+	case FW_STATE_LOADING_ALT:
+		if (!fw) {
+			printk(KERN_ERR "%s: Error requesting alt fw %s\n",
+			       pci_name(priv->pdev), di->helper_image);
+			goto fail;
+		}
+		priv->fw_ucode = fw;
+		rc = mwl8k_firmware_load_success(priv);
+		if (rc)
+			goto fail;
+		else
+			complete(&priv->firmware_loading_complete);
+		break;
 
-	priv->sram = pci_iomap(pdev, 0, 0x10000);
-	if (priv->sram == NULL) {
-		wiphy_err(hw->wiphy, "Cannot map device SRAM\n");
-		goto err_iounmap;
+	default:
+		printk(KERN_ERR "%s: Unexpected firmware loading state: %d\n",
+		       MWL8K_NAME, priv->fw_state);
+		BUG_ON(1);
 	}
 
-	/*
-	 * If BAR0 is a 32 bit BAR, the register BAR will be BAR1.
-	 * If BAR0 is a 64 bit BAR, the register BAR will be BAR2.
-	 */
-	priv->regs = pci_iomap(pdev, 1, 0x10000);
-	if (priv->regs == NULL) {
-		priv->regs = pci_iomap(pdev, 2, 0x10000);
-		if (priv->regs == NULL) {
-			wiphy_err(hw->wiphy, "Cannot map device registers\n");
-			goto err_iounmap;
-		}
-	}
+	return;
 
+fail:
+	priv->fw_state = FW_STATE_ERROR;
+	complete(&priv->firmware_loading_complete);
+	device_release_driver(&priv->pdev->dev);
+	mwl8k_release_firmware(priv);
+}
+
+static int mwl8k_init_firmware(struct ieee80211_hw *hw, char *fw_image,
+			       bool nowait)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	int rc;
 
 	/* Reset firmware and hardware */
 	mwl8k_hw_reset(priv);
 
 	/* Ask userland hotplug daemon for the device firmware */
-	rc = mwl8k_request_firmware(priv);
+	rc = mwl8k_request_firmware(priv, fw_image, nowait);
 	if (rc) {
 		wiphy_err(hw->wiphy, "Firmware files not found\n");
-		goto err_stop_firmware;
+		return rc;
 	}
 
+	if (nowait)
+		return rc;
+
 	/* Load firmware into hardware */
 	rc = mwl8k_load_firmware(hw);
-	if (rc) {
+	if (rc)
 		wiphy_err(hw->wiphy, "Cannot start firmware\n");
-		goto err_stop_firmware;
-	}
 
 	/* Reclaim memory once firmware is successfully loaded */
 	mwl8k_release_firmware(priv);
 
+	return rc;
+}
+
+/* initialize hw after successfully loading a firmware image */
+static int mwl8k_probe_hw(struct ieee80211_hw *hw)
+{
+	struct mwl8k_priv *priv = hw->priv;
+	int rc = 0;
+	int i;
 
 	if (priv->ap_fw) {
 		priv->rxd_ops = priv->device_info->ap_rxd_ops;
@@ -3980,58 +4178,11 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	priv->wmm_enabled = false;
 	priv->pending_tx_pkts = 0;
 
-
-	/*
-	 * Extra headroom is the size of the required DMA header
-	 * minus the size of the smallest 802.11 frame (CTS frame).
-	 */
-	hw->extra_tx_headroom =
-		sizeof(struct mwl8k_dma_data) - sizeof(struct ieee80211_cts);
-
-	hw->channel_change_time = 10;
-
-	hw->queues = MWL8K_TX_QUEUES;
-
-	/* Set rssi values to dBm */
-	hw->flags |= IEEE80211_HW_SIGNAL_DBM;
-	hw->vif_data_size = sizeof(struct mwl8k_vif);
-	hw->sta_data_size = sizeof(struct mwl8k_sta);
-
-	priv->macids_used = 0;
-	INIT_LIST_HEAD(&priv->vif_list);
-
-	/* Set default radio state and preamble */
-	priv->radio_on = 0;
-	priv->radio_short_preamble = 0;
-
-	/* Finalize join worker */
-	INIT_WORK(&priv->finalize_join_worker, mwl8k_finalize_join_worker);
-
-	/* TX reclaim and RX tasklets.  */
-	tasklet_init(&priv->poll_tx_task, mwl8k_tx_poll, (unsigned long)hw);
-	tasklet_disable(&priv->poll_tx_task);
-	tasklet_init(&priv->poll_rx_task, mwl8k_rx_poll, (unsigned long)hw);
-	tasklet_disable(&priv->poll_rx_task);
-
-	/* Power management cookie */
-	priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma);
-	if (priv->cookie == NULL)
-		goto err_stop_firmware;
-
 	rc = mwl8k_rxq_init(hw, 0);
 	if (rc)
-		goto err_free_cookie;
+		goto err_stop_firmware;
 	rxq_refill(hw, 0, INT_MAX);
 
-	mutex_init(&priv->fw_mutex);
-	priv->fw_mutex_owner = NULL;
-	priv->fw_mutex_depth = 0;
-	priv->hostcmd_wait = NULL;
-
-	spin_lock_init(&priv->tx_lock);
-
-	priv->tx_wait = NULL;
-
 	for (i = 0; i < MWL8K_TX_QUEUES; i++) {
 		rc = mwl8k_txq_init(hw, i);
 		if (rc)
@@ -4071,13 +4222,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 		goto err_free_irq;
 	}
 
-	hw->wiphy->interface_modes = 0;
-	if (priv->ap_macids_supported)
-		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP);
-	if (priv->sta_macids_supported)
-		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_STATION);
-
-
 	/* Turn radio off */
 	rc = mwl8k_cmd_radio_disable(hw);
 	if (rc) {
@@ -4096,12 +4240,6 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,
 	iowrite32(0, priv->regs + MWL8K_HIU_A2H_INTERRUPT_MASK);
 	free_irq(priv->pdev->irq, hw);
 
-	rc = ieee80211_register_hw(hw);
-	if (rc) {
-		wiphy_err(hw->wiphy, "Cannot register device\n");
-		goto err_free_queues;
-	}
-
 	wiphy_info(hw->wiphy, "%s v%d, %pm, %s firmware %u.%u.%u.%u\n",
 		   priv->device_info->part_name,
 		   priv->hw_rev, hw->wiphy->perm_addr,
@@ -4120,14 +4258,238 @@ err_free_queues:
 		mwl8k_txq_deinit(hw, i);
 	mwl8k_rxq_deinit(hw, 0);
 
+err_stop_firmware:
+	mwl8k_hw_reset(priv);
+
+	return rc;
+}
+
+/*
+ * invoke mwl8k_reload_firmware to change the firmware image after the device
+ * has already been registered
+ */
+static int mwl8k_reload_firmware(struct ieee80211_hw *hw, char *fw_image)
+{
+	int i, rc = 0;
+	struct mwl8k_priv *priv = hw->priv;
+
+	mwl8k_stop(hw);
+	mwl8k_rxq_deinit(hw, 0);
+
+	for (i = 0; i < MWL8K_TX_QUEUES; i++)
+		mwl8k_txq_deinit(hw, i);
+
+	rc = mwl8k_init_firmware(hw, fw_image, false);
+	if (rc)
+		goto fail;
+
+	rc = mwl8k_probe_hw(hw);
+	if (rc)
+		goto fail;
+
+	rc = mwl8k_start(hw);
+	if (rc)
+		goto fail;
+
+	rc = mwl8k_config(hw, ~0);
+	if (rc)
+		goto fail;
+
+	for (i = 0; i < MWL8K_TX_QUEUES; i++) {
+		rc = mwl8k_conf_tx(hw, i, &priv->wmm_params[i]);
+		if (rc)
+			goto fail;
+	}
+
+	return rc;
+
+fail:
+	printk(KERN_WARNING "mwl8k: Failed to reload firmware image.\n");
+	return rc;
+}
+
+static int mwl8k_firmware_load_success(struct mwl8k_priv *priv)
+{
+	struct ieee80211_hw *hw = priv->hw;
+	int i, rc;
+
+	rc = mwl8k_load_firmware(hw);
+	mwl8k_release_firmware(priv);
+	if (rc) {
+		wiphy_err(hw->wiphy, "Cannot start firmware\n");
+		return rc;
+	}
+
+	/*
+	 * Extra headroom is the size of the required DMA header
+	 * minus the size of the smallest 802.11 frame (CTS frame).
+	 */
+	hw->extra_tx_headroom =
+		sizeof(struct mwl8k_dma_data) - sizeof(struct ieee80211_cts);
+
+	hw->channel_change_time = 10;
+
+	hw->queues = MWL8K_TX_QUEUES;
+
+	/* Set rssi values to dBm */
+	hw->flags |= IEEE80211_HW_SIGNAL_DBM;
+	hw->vif_data_size = sizeof(struct mwl8k_vif);
+	hw->sta_data_size = sizeof(struct mwl8k_sta);
+
+	priv->macids_used = 0;
+	INIT_LIST_HEAD(&priv->vif_list);
+
+	/* Set default radio state and preamble */
+	priv->radio_on = 0;
+	priv->radio_short_preamble = 0;
+
+	/* Finalize join worker */
+	INIT_WORK(&priv->finalize_join_worker, mwl8k_finalize_join_worker);
+
+	/* TX reclaim and RX tasklets.  */
+	tasklet_init(&priv->poll_tx_task, mwl8k_tx_poll, (unsigned long)hw);
+	tasklet_disable(&priv->poll_tx_task);
+	tasklet_init(&priv->poll_rx_task, mwl8k_rx_poll, (unsigned long)hw);
+	tasklet_disable(&priv->poll_rx_task);
+
+	/* Power management cookie */
+	priv->cookie = pci_alloc_consistent(priv->pdev, 4, &priv->cookie_dma);
+	if (priv->cookie == NULL)
+		return -ENOMEM;
+
+	mutex_init(&priv->fw_mutex);
+	priv->fw_mutex_owner = NULL;
+	priv->fw_mutex_depth = 0;
+	priv->hostcmd_wait = NULL;
+
+	spin_lock_init(&priv->tx_lock);
+
+	priv->tx_wait = NULL;
+
+	rc = mwl8k_probe_hw(hw);
+	if (rc)
+		goto err_free_cookie;
+
+	hw->wiphy->interface_modes = 0;
+	if (priv->ap_macids_supported || priv->device_info->fw_image_ap)
+		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP);
+	if (priv->sta_macids_supported || priv->device_info->fw_image_sta)
+		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_STATION);
+
+	rc = ieee80211_register_hw(hw);
+	if (rc) {
+		wiphy_err(hw->wiphy, "Cannot register device\n");
+		goto err_unprobe_hw;
+	}
+
+	return 0;
+
+err_unprobe_hw:
+	for (i = 0; i < MWL8K_TX_QUEUES; i++)
+		mwl8k_txq_deinit(hw, i);
+	mwl8k_rxq_deinit(hw, 0);
+
 err_free_cookie:
 	if (priv->cookie != NULL)
 		pci_free_consistent(priv->pdev, 4,
 				priv->cookie, priv->cookie_dma);
 
+	return rc;
+}
+static int __devinit mwl8k_probe(struct pci_dev *pdev,
+				 const struct pci_device_id *id)
+{
+	static int printed_version;
+	struct ieee80211_hw *hw;
+	struct mwl8k_priv *priv;
+	struct mwl8k_device_info *di;
+	int rc;
+
+	if (!printed_version) {
+		printk(KERN_INFO "%s version %s\n", MWL8K_DESC, MWL8K_VERSION);
+		printed_version = 1;
+	}
+
+
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		printk(KERN_ERR "%s: Cannot enable new PCI device\n",
+		       MWL8K_NAME);
+		return rc;
+	}
+
+	rc = pci_request_regions(pdev, MWL8K_NAME);
+	if (rc) {
+		printk(KERN_ERR "%s: Cannot obtain PCI resources\n",
+		       MWL8K_NAME);
+		goto err_disable_device;
+	}
+
+	pci_set_master(pdev);
+
+
+	hw = ieee80211_alloc_hw(sizeof(*priv), &mwl8k_ops);
+	if (hw == NULL) {
+		printk(KERN_ERR "%s: ieee80211 alloc failed\n", MWL8K_NAME);
+		rc = -ENOMEM;
+		goto err_free_reg;
+	}
+
+	SET_IEEE80211_DEV(hw, &pdev->dev);
+	pci_set_drvdata(pdev, hw);
+
+	priv = hw->priv;
+	priv->hw = hw;
+	priv->pdev = pdev;
+	priv->device_info = &mwl8k_info_tbl[id->driver_data];
+
+
+	priv->sram = pci_iomap(pdev, 0, 0x10000);
+	if (priv->sram == NULL) {
+		wiphy_err(hw->wiphy, "Cannot map device SRAM\n");
+		goto err_iounmap;
+	}
+
+	/*
+	 * If BAR0 is a 32 bit BAR, the register BAR will be BAR1.
+	 * If BAR0 is a 64 bit BAR, the register BAR will be BAR2.
+	 */
+	priv->regs = pci_iomap(pdev, 1, 0x10000);
+	if (priv->regs == NULL) {
+		priv->regs = pci_iomap(pdev, 2, 0x10000);
+		if (priv->regs == NULL) {
+			wiphy_err(hw->wiphy, "Cannot map device registers\n");
+			goto err_iounmap;
+		}
+	}
+
+	/*
+	 * Choose the initial fw image depending on user input.  If a second
+	 * image is available, make it the alternative image that will be
+	 * loaded if the first one fails.
+	 */
+	init_completion(&priv->firmware_loading_complete);
+	di = priv->device_info;
+	if (ap_mode_default && di->fw_image_ap) {
+		priv->fw_pref = di->fw_image_ap;
+		priv->fw_alt = di->fw_image_sta;
+	} else if (!ap_mode_default && di->fw_image_sta) {
+		priv->fw_pref = di->fw_image_sta;
+		priv->fw_alt = di->fw_image_ap;
+	} else if (ap_mode_default && !di->fw_image_ap && di->fw_image_sta) {
+		printk(KERN_WARNING "AP fw is unavailable.  Using STA fw.");
+		priv->fw_pref = di->fw_image_sta;
+	} else if (!ap_mode_default && !di->fw_image_sta && di->fw_image_ap) {
+		printk(KERN_WARNING "STA fw is unavailable.  Using AP fw.");
+		priv->fw_pref = di->fw_image_ap;
+	}
+	rc = mwl8k_init_firmware(hw, priv->fw_pref, true);
+	if (rc)
+		goto err_stop_firmware;
+	return rc;
+
 err_stop_firmware:
 	mwl8k_hw_reset(priv);
-	mwl8k_release_firmware(priv);
 
 err_iounmap:
 	if (priv->regs != NULL)
@@ -4163,6 +4525,13 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev)
 		return;
 	priv = hw->priv;
 
+	wait_for_completion(&priv->firmware_loading_complete);
+
+	if (priv->fw_state == FW_STATE_ERROR) {
+		mwl8k_hw_reset(priv);
+		goto unmap;
+	}
+
 	ieee80211_stop_queues(hw);
 
 	ieee80211_unregister_hw(hw);
@@ -4185,6 +4554,7 @@ static void __devexit mwl8k_remove(struct pci_dev *pdev)
 
 	pci_free_consistent(priv->pdev, 4, priv->cookie, priv->cookie_dma);
 
+unmap:
 	pci_iounmap(pdev, priv->regs);
 	pci_iounmap(pdev, priv->sram);
 	pci_set_drvdata(pdev, NULL);
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index e8e2d0f4763..f3d396e7544 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -1392,10 +1392,9 @@ static void orinoco_process_scan_results(struct work_struct *work)
 				orinoco_add_hostscan_results(priv, buf, len);
 
 			kfree(buf);
-		} else if (priv->scan_request) {
+		} else {
 			/* Either abort or complete the scan */
-			cfg80211_scan_done(priv->scan_request, (len < 0));
-			priv->scan_request = NULL;
+			orinoco_scan_done(priv, (len < 0));
 		}
 
 		spin_lock_irqsave(&priv->scan_lock, flags);
@@ -1684,6 +1683,8 @@ static int __orinoco_down(struct orinoco_private *priv)
 		hermes_write_regn(hw, EVACK, 0xffff);
 	}
 
+	orinoco_scan_done(priv, true);
+
 	/* firmware will have to reassociate */
 	netif_carrier_off(dev);
 	priv->last_linkstatus = 0xffff;
@@ -1762,10 +1763,7 @@ void orinoco_reset(struct work_struct *work)
 	orinoco_unlock(priv, &flags);
 
 	/* Scanning support: Notify scan cancellation */
-	if (priv->scan_request) {
-		cfg80211_scan_done(priv->scan_request, 1);
-		priv->scan_request = NULL;
-	}
+	orinoco_scan_done(priv, true);
 
 	if (priv->hard_reset) {
 		err = (*priv->hard_reset)(priv);
@@ -1813,6 +1811,12 @@ static int __orinoco_commit(struct orinoco_private *priv)
 	struct net_device *dev = priv->ndev;
 	int err = 0;
 
+	/* If we've called commit, we are reconfiguring or bringing the
+	 * interface up. Maintaining countermeasures across this would
+	 * be confusing, so note that we've disabled them. The port will
+	 * be enabled later in orinoco_commit or __orinoco_up. */
+	priv->tkip_cm_active = 0;
+
 	err = orinoco_hw_program_rids(priv);
 
 	/* FIXME: what about netif_tx_lock */
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 71b3d68b940..32954c4b243 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -151,20 +151,20 @@ orinoco_cs_config(struct pcmcia_device *link)
 		goto failed;
 	}
 
-	ret = pcmcia_request_irq(link, orinoco_interrupt);
-	if (ret)
-		goto failed;
-
-	/* We initialize the hermes structure before completing PCMCIA
-	 * configuration just in case the interrupt handler gets
-	 * called. */
 	mem = ioport_map(link->resource[0]->start,
 			resource_size(link->resource[0]));
 	if (!mem)
 		goto failed;
 
+	/* We initialize the hermes structure before completing PCMCIA
+	 * configuration just in case the interrupt handler gets
+	 * called. */
 	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 
+	ret = pcmcia_request_irq(link, orinoco_interrupt);
+	if (ret)
+		goto failed;
+
 	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c
index a38a7bd25f1..b9aedf18a04 100644
--- a/drivers/net/wireless/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/orinoco/orinoco_usb.c
@@ -57,7 +57,6 @@
 #include <linux/fcntl.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
-#include <linux/smp_lock.h>
 #include <linux/usb.h>
 #include <linux/timer.h>
 
diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c
index 4300d9db7d8..86cb54c842e 100644
--- a/drivers/net/wireless/orinoco/scan.c
+++ b/drivers/net/wireless/orinoco/scan.c
@@ -229,3 +229,11 @@ void orinoco_add_hostscan_results(struct orinoco_private *priv,
 		priv->scan_request = NULL;
 	}
 }
+
+void orinoco_scan_done(struct orinoco_private *priv, bool abort)
+{
+	if (priv->scan_request) {
+		cfg80211_scan_done(priv->scan_request, abort);
+		priv->scan_request = NULL;
+	}
+}
diff --git a/drivers/net/wireless/orinoco/scan.h b/drivers/net/wireless/orinoco/scan.h
index 2dc4e046dbd..27281fb0a6d 100644
--- a/drivers/net/wireless/orinoco/scan.h
+++ b/drivers/net/wireless/orinoco/scan.h
@@ -16,5 +16,6 @@ void orinoco_add_extscan_result(struct orinoco_private *priv,
 void orinoco_add_hostscan_results(struct orinoco_private *dev,
 				  unsigned char *buf,
 				  size_t len);
+void orinoco_scan_done(struct orinoco_private *priv, bool abort);
 
 #endif /* _ORINOCO_SCAN_H_ */
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index fb859a5ad2e..db34c282e59 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -214,21 +214,21 @@ spectrum_cs_config(struct pcmcia_device *link)
 		goto failed;
 	}
 
-	ret = pcmcia_request_irq(link, orinoco_interrupt);
-	if (ret)
-		goto failed;
-
-	/* We initialize the hermes structure before completing PCMCIA
-	 * configuration just in case the interrupt handler gets
-	 * called. */
 	mem = ioport_map(link->resource[0]->start,
 			resource_size(link->resource[0]));
 	if (!mem)
 		goto failed;
 
+	/* We initialize the hermes structure before completing PCMCIA
+	 * configuration just in case the interrupt handler gets
+	 * called. */
 	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
 	hw->eeprom_pda = true;
 
+	ret = pcmcia_request_irq(link, orinoco_interrupt);
+	if (ret)
+		goto failed;
+
 	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c
index 93505f93bf9..e793679e2e1 100644
--- a/drivers/net/wireless/orinoco/wext.c
+++ b/drivers/net/wireless/orinoco/wext.c
@@ -893,6 +893,14 @@ static int orinoco_ioctl_set_auth(struct net_device *dev,
 		 */
 		break;
 
+	case IW_AUTH_MFP:
+		/* Management Frame Protection not supported.
+		 * Only fail if set to required.
+		 */
+		if (param->value == IW_AUTH_MFP_REQUIRED)
+			ret = -EINVAL;
+		break;
+
 	case IW_AUTH_KEY_MGMT:
 		/* wl_lkm implies value 2 == PSK for Hermes I
 		 * which ties in with WEXT
@@ -911,10 +919,10 @@ static int orinoco_ioctl_set_auth(struct net_device *dev,
 		 */
 		if (param->value) {
 			priv->tkip_cm_active = 1;
-			ret = hermes_enable_port(hw, 0);
+			ret = hermes_disable_port(hw, 0);
 		} else {
 			priv->tkip_cm_active = 0;
-			ret = hermes_disable_port(hw, 0);
+			ret = hermes_enable_port(hw, 0);
 		}
 		break;
 
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index d5bc21e5a02..21713a7638c 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -43,6 +43,7 @@ MODULE_FIRMWARE("isl3887usb");
 
 static struct usb_device_id p54u_table[] __devinitdata = {
 	/* Version 1 devices (pci chip + net2280) */
+	{USB_DEVICE(0x0411, 0x0050)},	/* Buffalo WLI2-USB2-G54 */
 	{USB_DEVICE(0x045e, 0x00c2)},	/* Microsoft MN-710 */
 	{USB_DEVICE(0x0506, 0x0a11)},	/* 3COM 3CRWE254G72 */
 	{USB_DEVICE(0x06b9, 0x0120)},	/* Thomson SpeedTouch 120g */
@@ -56,9 +57,13 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 	{USB_DEVICE(0x0846, 0x4220)},	/* Netgear WG111 */
 	{USB_DEVICE(0x09aa, 0x1000)},	/* Spinnaker Proto board */
 	{USB_DEVICE(0x0cde, 0x0006)},	/* Medion 40900, Roper Europe */
+	{USB_DEVICE(0x0db0, 0x6826)},	/* MSI UB54G (MS-6826) */
 	{USB_DEVICE(0x107b, 0x55f2)},	/* Gateway WGU-210 (Gemtek) */
 	{USB_DEVICE(0x124a, 0x4023)},	/* Shuttle PN15, Airvast WM168g, IOGear GWU513 */
+	{USB_DEVICE(0x1435, 0x0210)},	/* Inventel UR054G */
+	{USB_DEVICE(0x15a9, 0x0002)},	/* Gemtek WUBI-100GW 802.11g */
 	{USB_DEVICE(0x1630, 0x0005)},	/* 2Wire 802.11g USB (v1) / Z-Com */
+	{USB_DEVICE(0x182d, 0x096b)},	/* Sitecom WL-107 */
 	{USB_DEVICE(0x1915, 0x2234)},	/* Linksys WUSB54G OEM */
 	{USB_DEVICE(0x1915, 0x2235)},	/* Linksys WUSB54G Portable OEM */
 	{USB_DEVICE(0x2001, 0x3701)},	/* DLink DWL-G120 Spinnaker */
@@ -94,6 +99,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 	{USB_DEVICE(0x1435, 0x0427)},	/* Inventel UR054G */
 	{USB_DEVICE(0x1668, 0x1050)},	/* Actiontec 802UIG-1 */
 	{USB_DEVICE(0x2001, 0x3704)},	/* DLink DWL-G122 rev A2 */
+	{USB_DEVICE(0x2001, 0x3705)},	/* D-Link DWL-G120 rev C1 */
 	{USB_DEVICE(0x413c, 0x5513)},	/* Dell WLA3310 USB Wireless Adapter */
 	{USB_DEVICE(0x413c, 0x8102)},	/* Spinnaker DUT */
 	{USB_DEVICE(0x413c, 0x8104)},	/* Cohiba Proto board */
@@ -183,7 +189,7 @@ static void p54u_rx_cb(struct urb *urb)
 static void p54u_tx_cb(struct urb *urb)
 {
 	struct sk_buff *skb = urb->context;
-	struct ieee80211_hw *dev = (struct ieee80211_hw *)
+	struct ieee80211_hw *dev =
 		usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0));
 
 	p54_free_skb(dev, skb);
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 97007d9e2c1..0764d1a30d1 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -1776,11 +1776,8 @@ static void ray_update_multi_list(struct net_device *dev, int all)
 		/* Copy the kernel's list of MC addresses to card */
 		netdev_for_each_mc_addr(ha, dev) {
 			memcpy_toio(p, ha->addr, ETH_ALEN);
-			dev_dbg(&link->dev,
-			      "ray_update_multi add addr %02x%02x%02x%02x%02x%02x\n",
-			      ha->addr[0], ha->addr[1],
-			      ha->addr[2], ha->addr[3],
-			      ha->addr[4], ha->addr[5]);
+			dev_dbg(&link->dev, "ray_update_multi add addr %pm\n",
+				ha->addr);
 			p += ETH_ALEN;
 			i++;
 		}
@@ -2015,11 +2012,8 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id)
 				memcpy_fromio(&local->bss_id,
 					      prcs->var.rejoin_net_complete.
 					      bssid, ADDRLEN);
-				dev_dbg(&link->dev,
-				      "ray_cs new BSSID = %02x%02x%02x%02x%02x%02x\n",
-				      local->bss_id[0], local->bss_id[1],
-				      local->bss_id[2], local->bss_id[3],
-				      local->bss_id[4], local->bss_id[5]);
+				dev_dbg(&link->dev, "ray_cs new BSSID = %pm\n",
+					local->bss_id);
 				if (!sniffer)
 					authenticate(local);
 			}
@@ -2286,8 +2280,8 @@ static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
 	struct ethhdr *peth;
 	UCHAR srcaddr[ADDRLEN];
 	UCHAR destaddr[ADDRLEN];
-	static UCHAR org_bridge[3] = { 0, 0, 0xf8 };
-	static UCHAR org_1042[3] = { 0, 0, 0 };
+	static const UCHAR org_bridge[3] = { 0, 0, 0xf8 };
+	static const UCHAR org_1042[3] = { 0, 0, 0 };
 
 	memcpy(destaddr, ieee80211_get_DA(pmac), ADDRLEN);
 	memcpy(srcaddr, ieee80211_get_SA(pmac), ADDRLEN);
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index 71b5971da59..848cc2cce24 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -129,6 +129,7 @@ MODULE_PARM_DESC(workaround_interval,
 #define OID_802_11_RTS_THRESHOLD		cpu_to_le32(0x0d01020a)
 #define OID_802_11_SUPPORTED_RATES		cpu_to_le32(0x0d01020e)
 #define OID_802_11_CONFIGURATION		cpu_to_le32(0x0d010211)
+#define OID_802_11_POWER_MODE			cpu_to_le32(0x0d010216)
 #define OID_802_11_BSSID_LIST			cpu_to_le32(0x0d010217)
 
 
@@ -156,6 +157,12 @@ MODULE_PARM_DESC(workaround_interval,
 #define RNDIS_STATUS_ADAPTER_NOT_OPEN		cpu_to_le32(0xc0010012)
 
 
+/* Known device types */
+#define RNDIS_UNKNOWN	0
+#define RNDIS_BCM4320A	1
+#define RNDIS_BCM4320B	2
+
+
 /* NDIS data structures. Taken from wpa_supplicant driver_ndis.c
  * slightly modified for datatype endianess, etc
  */
@@ -233,6 +240,12 @@ enum ndis_80211_addwep_bits {
 	NDIS_80211_ADDWEP_TRANSMIT_KEY = cpu_to_le32(1 << 31)
 };
 
+enum ndis_80211_power_mode {
+	NDIS_80211_POWER_MODE_CAM,
+	NDIS_80211_POWER_MODE_MAX_PSP,
+	NDIS_80211_POWER_MODE_FAST_PSP,
+};
+
 struct ndis_80211_auth_request {
 	__le32 length;
 	u8 bssid[6];
@@ -472,12 +485,16 @@ struct rndis_wlan_private {
 	struct mutex command_lock;
 	unsigned long work_pending;
 	int last_qual;
+	s32 cqm_rssi_thold;
+	u32 cqm_rssi_hyst;
+	int last_cqm_event_rssi;
 
 	struct ieee80211_supported_band band;
 	struct ieee80211_channel channels[ARRAY_SIZE(rndis_channels)];
 	struct ieee80211_rate rates[ARRAY_SIZE(rndis_rates)];
 	u32 cipher_suites[ARRAY_SIZE(rndis_cipher_suites)];
 
+	int device_type;
 	int caps;
 	int multicast_size;
 
@@ -493,10 +510,10 @@ struct rndis_wlan_private {
 
 	/* hardware state */
 	bool radio_on;
+	int power_mode;
 	int infra_mode;
 	bool connected;
 	u8 bssid[ETH_ALEN];
-	struct ndis_80211_ssid essid;
 	__le32 current_command_oid;
 
 	/* encryption stuff */
@@ -547,7 +564,7 @@ static int rndis_del_key(struct wiphy *wiphy, struct net_device *netdev,
 			 u8 key_index, bool pairwise, const u8 *mac_addr);
 
 static int rndis_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
-								u8 key_index);
+				 u8 key_index, bool unicast, bool multicast);
 
 static int rndis_get_station(struct wiphy *wiphy, struct net_device *dev,
 					u8 *mac, struct station_info *sinfo);
@@ -563,7 +580,14 @@ static int rndis_del_pmksa(struct wiphy *wiphy, struct net_device *netdev,
 
 static int rndis_flush_pmksa(struct wiphy *wiphy, struct net_device *netdev);
 
-static struct cfg80211_ops rndis_config_ops = {
+static int rndis_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
+				bool enabled, int timeout);
+
+static int rndis_set_cqm_rssi_config(struct wiphy *wiphy,
+					struct net_device *dev,
+					s32 rssi_thold, u32 rssi_hyst);
+
+static const struct cfg80211_ops rndis_config_ops = {
 	.change_virtual_intf = rndis_change_virtual_intf,
 	.scan = rndis_scan,
 	.set_wiphy_params = rndis_set_wiphy_params,
@@ -582,6 +606,8 @@ static struct cfg80211_ops rndis_config_ops = {
 	.set_pmksa = rndis_set_pmksa,
 	.del_pmksa = rndis_del_pmksa,
 	.flush_pmksa = rndis_flush_pmksa,
+	.set_power_mgmt = rndis_set_power_mgmt,
+	.set_cqm_rssi_config = rndis_set_cqm_rssi_config,
 };
 
 static void *rndis_wiphy_privid = &rndis_wiphy_privid;
@@ -680,6 +706,7 @@ static const char *oid_to_string(__le32 oid)
 		OID_STR(OID_802_11_ADD_KEY);
 		OID_STR(OID_802_11_REMOVE_KEY);
 		OID_STR(OID_802_11_ASSOCIATION_INFORMATION);
+		OID_STR(OID_802_11_CAPABILITY);
 		OID_STR(OID_802_11_PMKID);
 		OID_STR(OID_802_11_NETWORK_TYPES_SUPPORTED);
 		OID_STR(OID_802_11_NETWORK_TYPE_IN_USE);
@@ -690,6 +717,7 @@ static const char *oid_to_string(__le32 oid)
 		OID_STR(OID_802_11_RTS_THRESHOLD);
 		OID_STR(OID_802_11_SUPPORTED_RATES);
 		OID_STR(OID_802_11_CONFIGURATION);
+		OID_STR(OID_802_11_POWER_MODE);
 		OID_STR(OID_802_11_BSSID_LIST);
 #undef OID_STR
 	}
@@ -810,7 +838,8 @@ exit_unlock:
 	return ret;
 }
 
-static int rndis_set_oid(struct usbnet *dev, __le32 oid, void *data, int len)
+static int rndis_set_oid(struct usbnet *dev, __le32 oid, const void *data,
+			 int len)
 {
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(dev);
 	union {
@@ -994,7 +1023,18 @@ static int level_to_qual(int level)
  */
 static int set_infra_mode(struct usbnet *usbdev, int mode);
 static void restore_keys(struct usbnet *usbdev);
-static int rndis_check_bssid_list(struct usbnet *usbdev);
+static int rndis_check_bssid_list(struct usbnet *usbdev, u8 *match_bssid,
+					bool *matched);
+
+static int rndis_start_bssid_list_scan(struct usbnet *usbdev)
+{
+	__le32 tmp;
+
+	/* Note: OID_802_11_BSSID_LIST_SCAN clears internal BSS list. */
+	tmp = cpu_to_le32(1);
+	return rndis_set_oid(usbdev, OID_802_11_BSSID_LIST_SCAN, &tmp,
+							sizeof(tmp));
+}
 
 static int set_essid(struct usbnet *usbdev, struct ndis_80211_ssid *ssid)
 {
@@ -1007,7 +1047,6 @@ static int set_essid(struct usbnet *usbdev, struct ndis_80211_ssid *ssid)
 		return ret;
 	}
 	if (ret == 0) {
-		memcpy(&priv->essid, ssid, sizeof(priv->essid));
 		priv->radio_on = true;
 		netdev_dbg(usbdev->net, "%s(): radio_on = true\n", __func__);
 	}
@@ -1015,7 +1054,7 @@ static int set_essid(struct usbnet *usbdev, struct ndis_80211_ssid *ssid)
 	return ret;
 }
 
-static int set_bssid(struct usbnet *usbdev, u8 bssid[ETH_ALEN])
+static int set_bssid(struct usbnet *usbdev, const u8 *bssid)
 {
 	int ret;
 
@@ -1031,7 +1070,9 @@ static int set_bssid(struct usbnet *usbdev, u8 bssid[ETH_ALEN])
 
 static int clear_bssid(struct usbnet *usbdev)
 {
-	u8 broadcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+	static const u8 broadcast_mac[ETH_ALEN] = {
+		0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	};
 
 	return set_bssid(usbdev, broadcast_mac);
 }
@@ -1904,14 +1945,14 @@ static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
 	struct usbnet *usbdev = netdev_priv(dev);
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	int ret;
-	__le32 tmp;
+	int delay = SCAN_DELAY_JIFFIES;
 
 	netdev_dbg(usbdev->net, "cfg80211.scan\n");
 
 	/* Get current bssid list from device before new scan, as new scan
 	 * clears internal bssid list.
 	 */
-	rndis_check_bssid_list(usbdev);
+	rndis_check_bssid_list(usbdev, NULL, NULL);
 
 	if (!request)
 		return -EINVAL;
@@ -1921,13 +1962,13 @@ static int rndis_scan(struct wiphy *wiphy, struct net_device *dev,
 
 	priv->scan_request = request;
 
-	tmp = cpu_to_le32(1);
-	ret = rndis_set_oid(usbdev, OID_802_11_BSSID_LIST_SCAN, &tmp,
-							sizeof(tmp));
+	ret = rndis_start_bssid_list_scan(usbdev);
 	if (ret == 0) {
+		if (priv->device_type == RNDIS_BCM4320A)
+			delay = HZ;
+
 		/* Wait before retrieving scan results from device */
-		queue_delayed_work(priv->workqueue, &priv->scan_work,
-			SCAN_DELAY_JIFFIES);
+		queue_delayed_work(priv->workqueue, &priv->scan_work, delay);
 	}
 
 	return ret;
@@ -1946,8 +1987,8 @@ static struct cfg80211_bss *rndis_bss_info_update(struct usbnet *usbdev,
 	int ie_len, bssid_len;
 	u8 *ie;
 
-	netdev_dbg(usbdev->net, " found bssid: '%.32s' [%pM]\n",
-		   bssid->ssid.essid, bssid->mac);
+	netdev_dbg(usbdev->net, " found bssid: '%.32s' [%pM], len: %d\n",
+		   bssid->ssid.essid, bssid->mac, le32_to_cpu(bssid->length));
 
 	/* parse bssid structure */
 	bssid_len = le32_to_cpu(bssid->length);
@@ -1981,49 +2022,98 @@ static struct cfg80211_bss *rndis_bss_info_update(struct usbnet *usbdev,
 		GFP_KERNEL);
 }
 
-static int rndis_check_bssid_list(struct usbnet *usbdev)
+static struct ndis_80211_bssid_ex *next_bssid_list_item(
+					struct ndis_80211_bssid_ex *bssid,
+					int *bssid_len, void *buf, int len)
+{
+	void *buf_end, *bssid_end;
+
+	buf_end = (char *)buf + len;
+	bssid_end = (char *)bssid + *bssid_len;
+
+	if ((int)(buf_end - bssid_end) < sizeof(bssid->length)) {
+		*bssid_len = 0;
+		return NULL;
+	} else {
+		bssid = (void *)((char *)bssid + *bssid_len);
+		*bssid_len = le32_to_cpu(bssid->length);
+		return bssid;
+	}
+}
+
+static bool check_bssid_list_item(struct ndis_80211_bssid_ex *bssid,
+				  int bssid_len, void *buf, int len)
+{
+	void *buf_end, *bssid_end;
+
+	if (!bssid || bssid_len <= 0 || bssid_len > len)
+		return false;
+
+	buf_end = (char *)buf + len;
+	bssid_end = (char *)bssid + bssid_len;
+
+	return (int)(buf_end - bssid_end) >= 0 && (int)(bssid_end - buf) >= 0;
+}
+
+static int rndis_check_bssid_list(struct usbnet *usbdev, u8 *match_bssid,
+					bool *matched)
 {
 	void *buf = NULL;
 	struct ndis_80211_bssid_list_ex *bssid_list;
 	struct ndis_80211_bssid_ex *bssid;
-	int ret = -EINVAL, len, count, bssid_len;
-	bool resized = false;
+	int ret = -EINVAL, len, count, bssid_len, real_count, new_len;
 
-	netdev_dbg(usbdev->net, "check_bssid_list\n");
+	netdev_dbg(usbdev->net, "%s()\n", __func__);
 
 	len = CONTROL_BUFFER_SIZE;
 resize_buf:
-	buf = kmalloc(len, GFP_KERNEL);
+	buf = kzalloc(len, GFP_KERNEL);
 	if (!buf) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
-	ret = rndis_query_oid(usbdev, OID_802_11_BSSID_LIST, buf, &len);
-	if (ret != 0)
+	/* BSSID-list might have got bigger last time we checked, keep
+	 * resizing until it won't get any bigger.
+	 */
+	new_len = len;
+	ret = rndis_query_oid(usbdev, OID_802_11_BSSID_LIST, buf, &new_len);
+	if (ret != 0 || new_len < sizeof(struct ndis_80211_bssid_list_ex))
 		goto out;
 
-	if (!resized && len > CONTROL_BUFFER_SIZE) {
-		resized = true;
+	if (new_len > len) {
+		len = new_len;
 		kfree(buf);
 		goto resize_buf;
 	}
 
+	len = new_len;
+
 	bssid_list = buf;
-	bssid = bssid_list->bssid;
-	bssid_len = le32_to_cpu(bssid->length);
 	count = le32_to_cpu(bssid_list->num_items);
-	netdev_dbg(usbdev->net, "check_bssid_list: %d BSSIDs found (buflen: %d)\n",
-		   count, len);
+	real_count = 0;
+	netdev_dbg(usbdev->net, "%s(): buflen: %d\n", __func__, len);
+
+	bssid_len = 0;
+	bssid = next_bssid_list_item(bssid_list->bssid, &bssid_len, buf, len);
 
-	while (count && ((void *)bssid + bssid_len) <= (buf + len)) {
-		rndis_bss_info_update(usbdev, bssid);
+	/* Device returns incorrect 'num_items'. Workaround by ignoring the
+	 * received 'num_items' and walking through full bssid buffer instead.
+	 */
+	while (check_bssid_list_item(bssid, bssid_len, buf, len)) {
+		if (rndis_bss_info_update(usbdev, bssid) && match_bssid &&
+		    matched) {
+			if (compare_ether_addr(bssid->mac, match_bssid))
+				*matched = true;
+		}
 
-		bssid = (void *)bssid + bssid_len;
-		bssid_len = le32_to_cpu(bssid->length);
-		count--;
+		real_count++;
+		bssid = next_bssid_list_item(bssid, &bssid_len, buf, len);
 	}
 
+	netdev_dbg(usbdev->net, "%s(): num_items from device: %d, really found:"
+				" %d\n", __func__, count, real_count);
+
 out:
 	kfree(buf);
 	return ret;
@@ -2041,7 +2131,7 @@ static void rndis_get_scan_results(struct work_struct *work)
 	if (!priv->scan_request)
 		return;
 
-	ret = rndis_check_bssid_list(usbdev);
+	ret = rndis_check_bssid_list(usbdev, NULL, NULL);
 
 	cfg80211_scan_done(priv->scan_request, ret < 0);
 
@@ -2355,7 +2445,7 @@ static int rndis_del_key(struct wiphy *wiphy, struct net_device *netdev,
 }
 
 static int rndis_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
-								u8 key_index)
+				 u8 key_index, bool unicast, bool multicast)
 {
 	struct rndis_wlan_private *priv = wiphy_priv(wiphy);
 	struct usbnet *usbdev = priv->usbdev;
@@ -2365,6 +2455,9 @@ static int rndis_set_default_key(struct wiphy *wiphy, struct net_device *netdev,
 
 	priv->encr_tx_key_index = key_index;
 
+	if (is_wpa_key(priv, key_index))
+		return 0;
+
 	key = priv->encr_keys[key_index];
 
 	return add_wep_key(usbdev, key.material, key.len, key_index);
@@ -2495,6 +2588,136 @@ static int rndis_flush_pmksa(struct wiphy *wiphy, struct net_device *netdev)
 	return rndis_set_oid(usbdev, OID_802_11_PMKID, &pmkid, sizeof(pmkid));
 }
 
+static int rndis_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
+				bool enabled, int timeout)
+{
+	struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+	struct usbnet *usbdev = priv->usbdev;
+	int power_mode;
+	__le32 mode;
+	int ret;
+
+	netdev_dbg(usbdev->net, "%s(): %s, %d\n", __func__,
+				enabled ? "enabled" : "disabled",
+				timeout);
+
+	if (enabled)
+		power_mode = NDIS_80211_POWER_MODE_FAST_PSP;
+	else
+		power_mode = NDIS_80211_POWER_MODE_CAM;
+
+	if (power_mode == priv->power_mode)
+		return 0;
+
+	priv->power_mode = power_mode;
+
+	mode = cpu_to_le32(power_mode);
+	ret = rndis_set_oid(usbdev, OID_802_11_POWER_MODE, &mode, sizeof(mode));
+
+	netdev_dbg(usbdev->net, "%s(): OID_802_11_POWER_MODE -> %d\n",
+				__func__, ret);
+
+	return ret;
+}
+
+static int rndis_set_cqm_rssi_config(struct wiphy *wiphy,
+					struct net_device *dev,
+					s32 rssi_thold, u32 rssi_hyst)
+{
+	struct rndis_wlan_private *priv = wiphy_priv(wiphy);
+
+	priv->cqm_rssi_thold = rssi_thold;
+	priv->cqm_rssi_hyst = rssi_hyst;
+	priv->last_cqm_event_rssi = 0;
+
+	return 0;
+}
+
+static void rndis_wlan_craft_connected_bss(struct usbnet *usbdev, u8 *bssid,
+					   struct ndis_80211_assoc_info *info)
+{
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	struct ieee80211_channel *channel;
+	struct ndis_80211_conf config;
+	struct ndis_80211_ssid ssid;
+	s32 signal;
+	u64 timestamp;
+	u16 capability;
+	u16 beacon_interval;
+	__le32 rssi;
+	u8 ie_buf[34];
+	int len, ret, ie_len;
+
+	/* Get signal quality, in case of error use rssi=0 and ignore error. */
+	len = sizeof(rssi);
+	rssi = 0;
+	ret = rndis_query_oid(usbdev, OID_802_11_RSSI, &rssi, &len);
+	signal = level_to_qual(le32_to_cpu(rssi));
+
+	netdev_dbg(usbdev->net, "%s(): OID_802_11_RSSI -> %d, "
+		   "rssi:%d, qual: %d\n", __func__, ret, le32_to_cpu(rssi),
+		   level_to_qual(le32_to_cpu(rssi)));
+
+	/* Get AP capabilities */
+	if (info) {
+		capability = le16_to_cpu(info->resp_ie.capa);
+	} else {
+		/* Set atleast ESS/IBSS capability */
+		capability = (priv->infra_mode == NDIS_80211_INFRA_INFRA) ?
+				WLAN_CAPABILITY_ESS : WLAN_CAPABILITY_IBSS;
+	}
+
+	/* Get channel and beacon interval */
+	len = sizeof(config);
+	ret = rndis_query_oid(usbdev, OID_802_11_CONFIGURATION, &config, &len);
+	netdev_dbg(usbdev->net, "%s(): OID_802_11_CONFIGURATION -> %d\n",
+				__func__, ret);
+	if (ret >= 0) {
+		beacon_interval = le16_to_cpu(config.beacon_period);
+		channel = ieee80211_get_channel(priv->wdev.wiphy,
+				KHZ_TO_MHZ(le32_to_cpu(config.ds_config)));
+		if (!channel) {
+			netdev_warn(usbdev->net, "%s(): could not get channel."
+						 "\n", __func__);
+			return;
+		}
+	} else {
+		netdev_warn(usbdev->net, "%s(): could not get configuration.\n",
+					 __func__);
+		return;
+	}
+
+	/* Get SSID, in case of error, use zero length SSID and ignore error. */
+	len = sizeof(ssid);
+	memset(&ssid, 0, sizeof(ssid));
+	ret = rndis_query_oid(usbdev, OID_802_11_SSID, &ssid, &len);
+	netdev_dbg(usbdev->net, "%s(): OID_802_11_SSID -> %d, len: %d, ssid: "
+				"'%.32s'\n", __func__, ret,
+				le32_to_cpu(ssid.length), ssid.essid);
+
+	if (le32_to_cpu(ssid.length) > 32)
+		ssid.length = cpu_to_le32(32);
+
+	ie_buf[0] = WLAN_EID_SSID;
+	ie_buf[1] = le32_to_cpu(ssid.length);
+	memcpy(&ie_buf[2], ssid.essid, le32_to_cpu(ssid.length));
+
+	ie_len = le32_to_cpu(ssid.length) + 2;
+
+	/* no tsf */
+	timestamp = 0;
+
+	netdev_dbg(usbdev->net, "%s(): channel:%d(freq), bssid:[%pM], tsf:%d, "
+		"capa:%x, beacon int:%d, resp_ie(len:%d, essid:'%.32s'), "
+		"signal:%d\n", __func__, (channel ? channel->center_freq : -1),
+		bssid, (u32)timestamp, capability, beacon_interval, ie_len,
+		ssid.essid, signal);
+
+	cfg80211_inform_bss(priv->wdev.wiphy, channel, bssid,
+		timestamp, capability, beacon_interval, ie_buf, ie_len,
+		signal, GFP_KERNEL);
+}
+
 /*
  * workers, indication handlers, device poller
  */
@@ -2507,6 +2730,7 @@ static void rndis_wlan_do_link_up_work(struct usbnet *usbdev)
 	u8 *req_ie, *resp_ie;
 	int ret, offset;
 	bool roamed = false;
+	bool match_bss;
 
 	if (priv->infra_mode == NDIS_80211_INFRA_INFRA && priv->connected) {
 		/* received media connect indication while connected, either
@@ -2558,6 +2782,13 @@ static void rndis_wlan_do_link_up_work(struct usbnet *usbdev)
 					resp_ie_len =
 						CONTROL_BUFFER_SIZE - offset;
 			}
+		} else {
+			/* Since rndis_wlan_craft_connected_bss() might use info
+			 * later and expects info to contain valid data if
+			 * non-null, free info and set NULL here.
+			 */
+			kfree(info);
+			info = NULL;
 		}
 	} else if (WARN_ON(priv->infra_mode != NDIS_80211_INFRA_ADHOC))
 		return;
@@ -2569,13 +2800,26 @@ static void rndis_wlan_do_link_up_work(struct usbnet *usbdev)
 	netdev_dbg(usbdev->net, "link up work: [%pM]%s\n",
 		   bssid, roamed ? " roamed" : "");
 
-	/* Internal bss list in device always contains at least the currently
+	/* Internal bss list in device should contain at least the currently
 	 * connected bss and we can get it to cfg80211 with
 	 * rndis_check_bssid_list().
-	 * NOTE: This is true for Broadcom chip, but not mentioned in RNDIS
-	 * spec.
+	 *
+	 * NDIS spec says: "If the device is associated, but the associated
+	 *  BSSID is not in its BSSID scan list, then the driver must add an
+	 *  entry for the BSSID at the end of the data that it returns in
+	 *  response to query of OID_802_11_BSSID_LIST."
+	 *
+	 * NOTE: Seems to be true for BCM4320b variant, but not BCM4320a.
 	 */
-	rndis_check_bssid_list(usbdev);
+	match_bss = false;
+	rndis_check_bssid_list(usbdev, bssid, &match_bss);
+
+	if (!is_zero_ether_addr(bssid) && !match_bss) {
+		/* Couldn't get bss from device, we need to manually craft bss
+		 * for cfg80211.
+		 */
+		rndis_wlan_craft_connected_bss(usbdev, bssid, info);
+	}
 
 	if (priv->infra_mode == NDIS_80211_INFRA_INFRA) {
 		if (!roamed)
@@ -2918,6 +3162,32 @@ static int rndis_wlan_get_caps(struct usbnet *usbdev, struct wiphy *wiphy)
 	return retval;
 }
 
+static void rndis_do_cqm(struct usbnet *usbdev, s32 rssi)
+{
+	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
+	enum nl80211_cqm_rssi_threshold_event event;
+	int thold, hyst, last_event;
+
+	if (priv->cqm_rssi_thold >= 0 || rssi >= 0)
+		return;
+	if (priv->infra_mode != NDIS_80211_INFRA_INFRA)
+		return;
+
+	last_event = priv->last_cqm_event_rssi;
+	thold = priv->cqm_rssi_thold;
+	hyst = priv->cqm_rssi_hyst;
+
+	if (rssi < thold && (last_event == 0 || rssi < last_event - hyst))
+		event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW;
+	else if (rssi > thold && (last_event == 0 || rssi > last_event + hyst))
+		event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH;
+	else
+		return;
+
+	priv->last_cqm_event_rssi = rssi;
+	cfg80211_cqm_rssi_notify(usbdev->net, event, GFP_KERNEL);
+}
+
 #define DEVICE_POLLER_JIFFIES (HZ)
 static void rndis_device_poller(struct work_struct *work)
 {
@@ -2934,13 +3204,28 @@ static void rndis_device_poller(struct work_struct *work)
 	 * also polls device with rndis_command() and catches for media link
 	 * indications.
 	 */
-	if (!is_associated(usbdev))
+	if (!is_associated(usbdev)) {
+		/* Workaround bad scanning in BCM4320a devices with active
+		 * background scanning when not associated.
+		 */
+		if (priv->device_type == RNDIS_BCM4320A && priv->radio_on &&
+		    !priv->scan_request) {
+			/* Get previous scan results */
+			rndis_check_bssid_list(usbdev, NULL, NULL);
+
+			/* Initiate new scan */
+			rndis_start_bssid_list_scan(usbdev);
+		}
+
 		goto end;
+	}
 
 	len = sizeof(rssi);
 	ret = rndis_query_oid(usbdev, OID_802_11_RSSI, &rssi, &len);
-	if (ret == 0)
+	if (ret == 0) {
 		priv->last_qual = level_to_qual(le32_to_cpu(rssi));
+		rndis_do_cqm(usbdev, le32_to_cpu(rssi));
+	}
 
 	netdev_dbg(usbdev->net, "dev-poller: OID_802_11_RSSI -> %d, rssi:%d, qual: %d\n",
 		   ret, le32_to_cpu(rssi), level_to_qual(le32_to_cpu(rssi)));
@@ -2992,10 +3277,12 @@ end:
 /*
  * driver/device initialization
  */
-static void rndis_copy_module_params(struct usbnet *usbdev)
+static void rndis_copy_module_params(struct usbnet *usbdev, int device_type)
 {
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 
+	priv->device_type = device_type;
+
 	priv->param_country[0] = modparam_country[0];
 	priv->param_country[1] = modparam_country[1];
 	priv->param_country[2] = 0;
@@ -3038,12 +3325,25 @@ static void rndis_copy_module_params(struct usbnet *usbdev)
 		priv->param_workaround_interval = modparam_workaround_interval;
 }
 
+static int unknown_early_init(struct usbnet *usbdev)
+{
+	/* copy module parameters for unknown so that iwconfig reports txpower
+	 * and workaround parameter is copied to private structure correctly.
+	 */
+	rndis_copy_module_params(usbdev, RNDIS_UNKNOWN);
+
+	/* This is unknown device, so do not try set configuration parameters.
+	 */
+
+	return 0;
+}
+
 static int bcm4320a_early_init(struct usbnet *usbdev)
 {
 	/* copy module parameters for bcm4320a so that iwconfig reports txpower
 	 * and workaround parameter is copied to private structure correctly.
 	 */
-	rndis_copy_module_params(usbdev);
+	rndis_copy_module_params(usbdev, RNDIS_BCM4320A);
 
 	/* bcm4320a doesn't handle configuration parameters well. Try
 	 * set any and you get partially zeroed mac and broken device.
@@ -3057,7 +3357,7 @@ static int bcm4320b_early_init(struct usbnet *usbdev)
 	struct rndis_wlan_private *priv = get_rndis_wlan_priv(usbdev);
 	char buf[8];
 
-	rndis_copy_module_params(usbdev);
+	rndis_copy_module_params(usbdev, RNDIS_BCM4320B);
 
 	/* Early initialization settings, setting these won't have effect
 	 * if called after generic_rndis_bind().
@@ -3187,13 +3487,15 @@ static int rndis_wlan_bind(struct usbnet *usbdev, struct usb_interface *intf)
 
 	set_default_iw_params(usbdev);
 
+	priv->power_mode = -1;
+
 	/* set default rts/frag */
 	rndis_set_wiphy_params(wiphy,
 			WIPHY_PARAM_FRAG_THRESHOLD | WIPHY_PARAM_RTS_THRESHOLD);
 
-	/* turn radio on */
-	priv->radio_on = true;
-	disassociate(usbdev, true);
+	/* turn radio off on init */
+	priv->radio_on = false;
+	disassociate(usbdev, false);
 	netif_carrier_off(usbdev->net);
 
 	return 0;
@@ -3320,7 +3622,7 @@ static const struct driver_info rndis_wlan_info = {
 	.tx_fixup =	rndis_tx_fixup,
 	.reset =	rndis_wlan_reset,
 	.stop =		rndis_wlan_stop,
-	.early_init =	bcm4320a_early_init,
+	.early_init =	unknown_early_init,
 	.indication =	rndis_wlan_indication,
 };
 
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index eea1ef2f502..6f383cd684b 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -53,51 +53,41 @@ config RT61PCI
 
 	  When compiled as a module, this driver will be called rt61pci.
 
-config RT2800PCI_PCI
-	boolean
-	depends on PCI
-	default y
-
-config RT2800PCI_SOC
-	boolean
-	depends on RALINK_RT288X || RALINK_RT305X
-	default y
-
 config RT2800PCI
-	tristate "Ralink rt28xx/rt30xx/rt35xx (PCI/PCIe/PCMCIA) support (EXPERIMENTAL)"
-	depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL
+	tristate "Ralink rt27xx/rt28xx/rt30xx (PCI/PCIe/PCMCIA) support"
+	depends on PCI || RALINK_RT288X || RALINK_RT305X
 	select RT2800_LIB
-	select RT2X00_LIB_PCI if RT2800PCI_PCI
-	select RT2X00_LIB_SOC if RT2800PCI_SOC
+	select RT2X00_LIB_PCI if PCI
+	select RT2X00_LIB_SOC if RALINK_RT288X || RALINK_RT305X
 	select RT2X00_LIB_HT
 	select RT2X00_LIB_FIRMWARE
 	select RT2X00_LIB_CRYPTO
 	select CRC_CCITT
 	select EEPROM_93CX6
 	---help---
-	  This adds support for rt2800/rt3000/rt3500 wireless chipset family.
-	  Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052
-
-	  This driver is non-functional at the moment and is intended for
-	  developers.
+	  This adds support for rt27xx/rt28xx/rt30xx wireless chipset family.
+	  Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890, RT3052,
+			   RT3090, RT3091 & RT3092
 
 	  When compiled as a module, this driver will be called "rt2800pci.ko".
 
 if RT2800PCI
 
-config RT2800PCI_RT30XX
-	bool "rt2800pci - Include support for rt30xx (PCI/PCIe/PCMCIA) devices"
-	default y
+config RT2800PCI_RT33XX
+	bool "rt2800pci - Include support for rt33xx devices (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	default n
 	---help---
-	  This adds support for rt30xx wireless chipset family to the
+	  This adds support for rt33xx wireless chipset family to the
 	  rt2800pci driver.
-	  Supported chips: RT3090, RT3091 & RT3092
+	  Supported chips: RT3390
 
 	  Support for these devices is non-functional at the moment and is
 	  intended for testers and developers.
 
 config RT2800PCI_RT35XX
-	bool "rt2800pci - Include support for rt35xx (PCI/PCIe/PCMCIA) devices"
+	bool "rt2800pci - Include support for rt35xx devices (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
 	default n
 	---help---
 	  This adds support for rt35xx wireless chipset family to the
@@ -134,8 +124,8 @@ config RT73USB
 	  When compiled as a module, this driver will be called rt73usb.
 
 config RT2800USB
-	tristate "Ralink rt2800 (USB) support (EXPERIMENTAL)"
-	depends on USB && EXPERIMENTAL
+	tristate "Ralink rt27xx/rt28xx/rt30xx (USB) support"
+	depends on USB
 	select RT2800_LIB
 	select RT2X00_LIB_USB
 	select RT2X00_LIB_HT
@@ -143,30 +133,28 @@ config RT2800USB
 	select RT2X00_LIB_CRYPTO
 	select CRC_CCITT
 	---help---
-	  This adds experimental support for rt2800 wireless chipset family.
-	  Supported chips: RT2770, RT2870 & RT3070.
-
-	  Known issues:
-	  - support for RT2870 chips doesn't work with 802.11n APs yet
-	  - support for RT3070 chips is non-functional at the moment
+	  This adds support for rt27xx/rt28xx/rt30xx wireless chipset family.
+	  Supported chips: RT2770, RT2870 & RT3070, RT3071 & RT3072
 
 	  When compiled as a module, this driver will be called "rt2800usb.ko".
 
 if RT2800USB
 
-config RT2800USB_RT30XX
-	bool "rt2800usb - Include support for rt30xx (USB) devices"
-	default y
+config RT2800USB_RT33XX
+	bool "rt2800usb - Include support for rt33xx devices (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	default n
 	---help---
-	  This adds support for rt30xx wireless chipset family to the
+	  This adds support for rt33xx wireless chipset family to the
 	  rt2800usb driver.
-	  Supported chips: RT3070, RT3071 & RT3072
+	  Supported chips: RT3370
 
 	  Support for these devices is non-functional at the moment and is
 	  intended for testers and developers.
 
 config RT2800USB_RT35XX
-	bool "rt2800usb - Include support for rt35xx (USB) devices"
+	bool "rt2800usb - Include support for rt35xx devices (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
 	default n
 	---help---
 	  This adds support for rt35xx wireless chipset family to the
@@ -180,9 +168,9 @@ config RT2800USB_UNKNOWN
 	bool "rt2800usb - Include support for unknown (USB) devices"
 	default n
 	---help---
-	  This adds support for rt2800 family devices that are known to
-	  have a rt2800 family chipset, but for which the exact chipset
-	  is unknown.
+	  This adds support for rt2800usb devices that are known to
+	  have a rt28xx family compatible chipset, but for which the exact
+	  chipset is unknown.
 
 	  Support status for these devices is unknown, and enabling these
 	  devices may or may not work.
@@ -221,9 +209,6 @@ config RT2X00_LIB_LEDS
 	boolean
 	default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n)
 
-comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00"
-	depends on RT2X00_LIB=y && LEDS_CLASS=m
-
 config RT2X00_LIB_DEBUGFS
 	bool "Ralink debugfs support"
 	depends on RT2X00_LIB && MAC80211_DEBUGFS
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 4f420a9ec5d..54ca49ad347 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -633,6 +633,88 @@ static void rt2400pci_link_tuner(struct rt2x00_dev *rt2x00dev,
 }
 
 /*
+ * Queue handlers.
+ */
+static void rt2400pci_start_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
+		rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX, 0);
+		rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
+		break;
+	case QID_BEACON:
+		rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+		rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
+		rt2x00_set_field32(&reg, CSR14_TBCN, 1);
+		rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
+		rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rt2400pci_kick_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_AC_VO:
+		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+		rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, 1);
+		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+		break;
+	case QID_AC_VI:
+		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+		rt2x00_set_field32(&reg, TXCSR0_KICK_TX, 1);
+		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+		break;
+	case QID_ATIM:
+		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+		rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, 1);
+		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rt2400pci_stop_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_ATIM:
+		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+		rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
+		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+		break;
+	case QID_RX:
+		rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
+		rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX, 1);
+		rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
+		break;
+	case QID_BEACON:
+		rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+		rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
+		rt2x00_set_field32(&reg, CSR14_TBCN, 0);
+		rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
+		rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
  * Initialization functions.
  */
 static bool rt2400pci_get_entry_state(struct queue_entry *entry)
@@ -878,18 +960,6 @@ static int rt2400pci_init_bbp(struct rt2x00_dev *rt2x00dev)
 /*
  * Device state switch handlers.
  */
-static void rt2400pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
-				enum dev_state state)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
-	rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
-			   (state == STATE_RADIO_RX_OFF) ||
-			   (state == STATE_RADIO_RX_OFF_LINK));
-	rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
-}
-
 static void rt2400pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 				 enum dev_state state)
 {
@@ -988,12 +1058,6 @@ static int rt2400pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 	case STATE_RADIO_OFF:
 		rt2400pci_disable_radio(rt2x00dev);
 		break;
-	case STATE_RADIO_RX_ON:
-	case STATE_RADIO_RX_ON_LINK:
-	case STATE_RADIO_RX_OFF:
-	case STATE_RADIO_RX_OFF_LINK:
-		rt2400pci_toggle_rx(rt2x00dev, state);
-		break;
 	case STATE_RADIO_IRQ_ON:
 	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
@@ -1125,32 +1189,6 @@ static void rt2400pci_write_beacon(struct queue_entry *entry,
 	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 }
 
-static void rt2400pci_kick_tx_queue(struct data_queue *queue)
-{
-	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
-	rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, (queue->qid == QID_AC_BE));
-	rt2x00_set_field32(&reg, TXCSR0_KICK_TX, (queue->qid == QID_AC_BK));
-	rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, (queue->qid == QID_ATIM));
-	rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
-}
-
-static void rt2400pci_kill_tx_queue(struct data_queue *queue)
-{
-	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	u32 reg;
-
-	if (queue->qid == QID_BEACON) {
-		rt2x00pci_register_write(rt2x00dev, CSR14, 0);
-	} else {
-		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
-		rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
-		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
-	}
-}
-
 /*
  * RX control handlers
  */
@@ -1284,13 +1322,13 @@ static irqreturn_t rt2400pci_interrupt_thread(int irq, void *dev_instance)
 	 * 4 - Priority ring transmit done interrupt.
 	 */
 	if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
-		rt2400pci_txdone(rt2x00dev, QID_AC_BE);
+		rt2400pci_txdone(rt2x00dev, QID_AC_VO);
 
 	/*
 	 * 5 - Tx ring transmit done interrupt.
 	 */
 	if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
-		rt2400pci_txdone(rt2x00dev, QID_AC_BK);
+		rt2400pci_txdone(rt2x00dev, QID_AC_VI);
 
 	/* Enable interrupts again. */
 	rt2x00dev->ops->lib->set_device_state(rt2x00dev,
@@ -1612,6 +1650,7 @@ static const struct ieee80211_ops rt2400pci_mac80211_ops = {
 	.get_tsf		= rt2400pci_get_tsf,
 	.tx_last_beacon		= rt2400pci_tx_last_beacon,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
+	.flush			= rt2x00mac_flush,
 };
 
 static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
@@ -1627,10 +1666,11 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
 	.link_stats		= rt2400pci_link_stats,
 	.reset_tuner		= rt2400pci_reset_tuner,
 	.link_tuner		= rt2400pci_link_tuner,
+	.start_queue		= rt2400pci_start_queue,
+	.kick_queue		= rt2400pci_kick_queue,
+	.stop_queue		= rt2400pci_stop_queue,
 	.write_tx_desc		= rt2400pci_write_tx_desc,
 	.write_beacon		= rt2400pci_write_beacon,
-	.kick_tx_queue		= rt2400pci_kick_tx_queue,
-	.kill_tx_queue		= rt2400pci_kill_tx_queue,
 	.fill_rxdone		= rt2400pci_fill_rxdone,
 	.config_filter		= rt2400pci_config_filter,
 	.config_intf		= rt2400pci_config_intf,
@@ -1640,28 +1680,28 @@ static const struct rt2x00lib_ops rt2400pci_rt2x00_ops = {
 };
 
 static const struct data_queue_desc rt2400pci_queue_rx = {
-	.entry_num		= RX_ENTRIES,
+	.entry_num		= 24,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= RXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
 };
 
 static const struct data_queue_desc rt2400pci_queue_tx = {
-	.entry_num		= TX_ENTRIES,
+	.entry_num		= 24,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
 };
 
 static const struct data_queue_desc rt2400pci_queue_bcn = {
-	.entry_num		= BEACON_ENTRIES,
+	.entry_num		= 1,
 	.data_size		= MGMT_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
 };
 
 static const struct data_queue_desc rt2400pci_queue_atim = {
-	.entry_num		= ATIM_ENTRIES,
+	.entry_num		= 8,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index c048b18f413..d3a4a68cc43 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -809,8 +809,8 @@
 /*
  * DMA descriptor defines.
  */
-#define TXD_DESC_SIZE			( 8 * sizeof(__le32) )
-#define RXD_DESC_SIZE			( 8 * sizeof(__le32) )
+#define TXD_DESC_SIZE			(8 * sizeof(__le32))
+#define RXD_DESC_SIZE			(8 * sizeof(__le32))
 
 /*
  * TX descriptor format for TX, PRIO, ATIM and Beacon Ring.
@@ -948,6 +948,6 @@
 	((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER)
 
 #define TXPOWER_TO_DEV(__txpower) \
-	MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER)
+	(MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER))
 
 #endif /* RT2400PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 97feb7aef80..a9ff26a2772 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -723,6 +723,88 @@ dynamic_cca_tune:
 }
 
 /*
+ * Queue handlers.
+ */
+static void rt2500pci_start_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
+		rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX, 0);
+		rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
+		break;
+	case QID_BEACON:
+		rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+		rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
+		rt2x00_set_field32(&reg, CSR14_TBCN, 1);
+		rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
+		rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rt2500pci_kick_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_AC_VO:
+		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+		rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, 1);
+		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+		break;
+	case QID_AC_VI:
+		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+		rt2x00_set_field32(&reg, TXCSR0_KICK_TX, 1);
+		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+		break;
+	case QID_ATIM:
+		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+		rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, 1);
+		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rt2500pci_stop_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_ATIM:
+		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
+		rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
+		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
+		break;
+	case QID_RX:
+		rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
+		rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX, 1);
+		rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
+		break;
+	case QID_BEACON:
+		rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
+		rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
+		rt2x00_set_field32(&reg, CSR14_TBCN, 0);
+		rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
+		rt2x00pci_register_write(rt2x00dev, CSR14, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
  * Initialization functions.
  */
 static bool rt2500pci_get_entry_state(struct queue_entry *entry)
@@ -1033,18 +1115,6 @@ static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev)
 /*
  * Device state switch handlers.
  */
-static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
-				enum dev_state state)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
-	rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
-			   (state == STATE_RADIO_RX_OFF) ||
-			   (state == STATE_RADIO_RX_OFF_LINK));
-	rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
-}
-
 static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 				 enum dev_state state)
 {
@@ -1143,12 +1213,6 @@ static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 	case STATE_RADIO_OFF:
 		rt2500pci_disable_radio(rt2x00dev);
 		break;
-	case STATE_RADIO_RX_ON:
-	case STATE_RADIO_RX_ON_LINK:
-	case STATE_RADIO_RX_OFF:
-	case STATE_RADIO_RX_OFF_LINK:
-		rt2500pci_toggle_rx(rt2x00dev, state);
-		break;
 	case STATE_RADIO_IRQ_ON:
 	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
@@ -1193,9 +1257,9 @@ static void rt2500pci_write_tx_desc(struct queue_entry *entry,
 
 	rt2x00_desc_read(txd, 2, &word);
 	rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER);
-	rt2x00_set_field32(&word, TXD_W2_AIFS, txdesc->aifs);
-	rt2x00_set_field32(&word, TXD_W2_CWMIN, txdesc->cw_min);
-	rt2x00_set_field32(&word, TXD_W2_CWMAX, txdesc->cw_max);
+	rt2x00_set_field32(&word, TXD_W2_AIFS, entry->queue->aifs);
+	rt2x00_set_field32(&word, TXD_W2_CWMIN, entry->queue->cw_min);
+	rt2x00_set_field32(&word, TXD_W2_CWMAX, entry->queue->cw_max);
 	rt2x00_desc_write(txd, 2, word);
 
 	rt2x00_desc_read(txd, 3, &word);
@@ -1279,32 +1343,6 @@ static void rt2500pci_write_beacon(struct queue_entry *entry,
 	rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 }
 
-static void rt2500pci_kick_tx_queue(struct data_queue *queue)
-{
-	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
-	rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, (queue->qid == QID_AC_BE));
-	rt2x00_set_field32(&reg, TXCSR0_KICK_TX, (queue->qid == QID_AC_BK));
-	rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, (queue->qid == QID_ATIM));
-	rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
-}
-
-static void rt2500pci_kill_tx_queue(struct data_queue *queue)
-{
-	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	u32 reg;
-
-	if (queue->qid == QID_BEACON) {
-		rt2x00pci_register_write(rt2x00dev, CSR14, 0);
-	} else {
-		rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
-		rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
-		rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
-	}
-}
-
 /*
  * RX control handlers
  */
@@ -1417,13 +1455,13 @@ static irqreturn_t rt2500pci_interrupt_thread(int irq, void *dev_instance)
 	 * 4 - Priority ring transmit done interrupt.
 	 */
 	if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
-		rt2500pci_txdone(rt2x00dev, QID_AC_BE);
+		rt2500pci_txdone(rt2x00dev, QID_AC_VO);
 
 	/*
 	 * 5 - Tx ring transmit done interrupt.
 	 */
 	if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
-		rt2500pci_txdone(rt2x00dev, QID_AC_BK);
+		rt2500pci_txdone(rt2x00dev, QID_AC_VI);
 
 	/* Enable interrupts again. */
 	rt2x00dev->ops->lib->set_device_state(rt2x00dev,
@@ -1909,6 +1947,7 @@ static const struct ieee80211_ops rt2500pci_mac80211_ops = {
 	.get_tsf		= rt2500pci_get_tsf,
 	.tx_last_beacon		= rt2500pci_tx_last_beacon,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
+	.flush			= rt2x00mac_flush,
 };
 
 static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
@@ -1924,10 +1963,11 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
 	.link_stats		= rt2500pci_link_stats,
 	.reset_tuner		= rt2500pci_reset_tuner,
 	.link_tuner		= rt2500pci_link_tuner,
+	.start_queue		= rt2500pci_start_queue,
+	.kick_queue		= rt2500pci_kick_queue,
+	.stop_queue		= rt2500pci_stop_queue,
 	.write_tx_desc		= rt2500pci_write_tx_desc,
 	.write_beacon		= rt2500pci_write_beacon,
-	.kick_tx_queue		= rt2500pci_kick_tx_queue,
-	.kill_tx_queue		= rt2500pci_kill_tx_queue,
 	.fill_rxdone		= rt2500pci_fill_rxdone,
 	.config_filter		= rt2500pci_config_filter,
 	.config_intf		= rt2500pci_config_intf,
@@ -1937,28 +1977,28 @@ static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
 };
 
 static const struct data_queue_desc rt2500pci_queue_rx = {
-	.entry_num		= RX_ENTRIES,
+	.entry_num		= 32,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= RXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
 };
 
 static const struct data_queue_desc rt2500pci_queue_tx = {
-	.entry_num		= TX_ENTRIES,
+	.entry_num		= 32,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
 };
 
 static const struct data_queue_desc rt2500pci_queue_bcn = {
-	.entry_num		= BEACON_ENTRIES,
+	.entry_num		= 1,
 	.data_size		= MGMT_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
 };
 
 static const struct data_queue_desc rt2500pci_queue_atim = {
-	.entry_num		= ATIM_ENTRIES,
+	.entry_num		= 8,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index d708031361a..2aad7ba8a10 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -1088,8 +1088,8 @@
 /*
  * DMA descriptor defines.
  */
-#define TXD_DESC_SIZE			( 11 * sizeof(__le32) )
-#define RXD_DESC_SIZE			( 11 * sizeof(__le32) )
+#define TXD_DESC_SIZE			(11 * sizeof(__le32))
+#define RXD_DESC_SIZE			(11 * sizeof(__le32))
 
 /*
  * TX descriptor format for TX, PRIO, ATIM and Beacon Ring.
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 93e44c7f3a7..6b3b1de4679 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -39,7 +39,7 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 0;
+static int modparam_nohwcrypt;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
@@ -739,6 +739,55 @@ static void rt2500usb_reset_tuner(struct rt2x00_dev *rt2x00dev,
 }
 
 /*
+ * Queue handlers.
+ */
+static void rt2500usb_start_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u16 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
+		rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 0);
+		rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+		break;
+	case QID_BEACON:
+		rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
+		rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 1);
+		rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 1);
+		rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 1);
+		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rt2500usb_stop_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u16 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
+		rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX, 1);
+		rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
+		break;
+	case QID_BEACON:
+		rt2500usb_register_read(rt2x00dev, TXRX_CSR19, &reg);
+		rt2x00_set_field16(&reg, TXRX_CSR19_TSF_COUNT, 0);
+		rt2x00_set_field16(&reg, TXRX_CSR19_TBCN, 0);
+		rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
+		rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
  * Initialization functions.
  */
 static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
@@ -931,18 +980,6 @@ static int rt2500usb_init_bbp(struct rt2x00_dev *rt2x00dev)
 /*
  * Device state switch handlers.
  */
-static void rt2500usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
-				enum dev_state state)
-{
-	u16 reg;
-
-	rt2500usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
-	rt2x00_set_field16(&reg, TXRX_CSR2_DISABLE_RX,
-			   (state == STATE_RADIO_RX_OFF) ||
-			   (state == STATE_RADIO_RX_OFF_LINK));
-	rt2500usb_register_write(rt2x00dev, TXRX_CSR2, reg);
-}
-
 static int rt2500usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	/*
@@ -1018,12 +1055,6 @@ static int rt2500usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 	case STATE_RADIO_OFF:
 		rt2500usb_disable_radio(rt2x00dev);
 		break;
-	case STATE_RADIO_RX_ON:
-	case STATE_RADIO_RX_ON_LINK:
-	case STATE_RADIO_RX_OFF:
-	case STATE_RADIO_RX_OFF_LINK:
-		rt2500usb_toggle_rx(rt2x00dev, state);
-		break;
 	case STATE_RADIO_IRQ_ON:
 	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
@@ -1081,9 +1112,9 @@ static void rt2500usb_write_tx_desc(struct queue_entry *entry,
 
 	rt2x00_desc_read(txd, 1, &word);
 	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
-	rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs);
-	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
-	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
+	rt2x00_set_field32(&word, TXD_W1_AIFS, entry->queue->aifs);
+	rt2x00_set_field32(&word, TXD_W1_CWMIN, entry->queue->cw_min);
+	rt2x00_set_field32(&word, TXD_W1_CWMAX, entry->queue->cw_max);
 	rt2x00_desc_write(txd, 1, word);
 
 	rt2x00_desc_read(txd, 2, &word);
@@ -1206,14 +1237,6 @@ static int rt2500usb_get_tx_data_len(struct queue_entry *entry)
 	return length;
 }
 
-static void rt2500usb_kill_tx_queue(struct data_queue *queue)
-{
-	if (queue->qid == QID_BEACON)
-		rt2500usb_register_write(queue->rt2x00dev, TXRX_CSR19, 0);
-
-	rt2x00usb_kill_tx_queue(queue);
-}
-
 /*
  * RX control handlers
  */
@@ -1801,6 +1824,7 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
 	.bss_info_changed	= rt2x00mac_bss_info_changed,
 	.conf_tx		= rt2x00mac_conf_tx,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
+	.flush			= rt2x00mac_flush,
 };
 
 static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
@@ -1813,11 +1837,13 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
 	.link_stats		= rt2500usb_link_stats,
 	.reset_tuner		= rt2500usb_reset_tuner,
 	.watchdog		= rt2x00usb_watchdog,
+	.start_queue		= rt2500usb_start_queue,
+	.kick_queue		= rt2x00usb_kick_queue,
+	.stop_queue		= rt2500usb_stop_queue,
+	.flush_queue		= rt2x00usb_flush_queue,
 	.write_tx_desc		= rt2500usb_write_tx_desc,
 	.write_beacon		= rt2500usb_write_beacon,
 	.get_tx_data_len	= rt2500usb_get_tx_data_len,
-	.kick_tx_queue		= rt2x00usb_kick_tx_queue,
-	.kill_tx_queue		= rt2500usb_kill_tx_queue,
 	.fill_rxdone		= rt2500usb_fill_rxdone,
 	.config_shared_key	= rt2500usb_config_key,
 	.config_pairwise_key	= rt2500usb_config_key,
@@ -1829,28 +1855,28 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
 };
 
 static const struct data_queue_desc rt2500usb_queue_rx = {
-	.entry_num		= RX_ENTRIES,
+	.entry_num		= 32,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= RXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
 };
 
 static const struct data_queue_desc rt2500usb_queue_tx = {
-	.entry_num		= TX_ENTRIES,
+	.entry_num		= 32,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
 };
 
 static const struct data_queue_desc rt2500usb_queue_bcn = {
-	.entry_num		= BEACON_ENTRIES,
+	.entry_num		= 1,
 	.data_size		= MGMT_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb_bcn),
 };
 
 static const struct data_queue_desc rt2500usb_queue_atim = {
-	.entry_num		= ATIM_ENTRIES,
+	.entry_num		= 8,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index eb8b6cab992..4c55e8525ca 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -46,7 +46,11 @@
  * RF2020 2.4G B/G
  * RF3021 2.4G 1T2R
  * RF3022 2.4G 2T2R
- * RF3052 2.4G 2T2R
+ * RF3052 2.4G/5G 2T2R
+ * RF2853 2.4G/5G 3T3R
+ * RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
+ * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
+ * RF3853 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
  */
 #define RF2820				0x0001
 #define RF2850				0x0002
@@ -57,7 +61,10 @@
 #define RF3021				0x0007
 #define RF3022				0x0008
 #define RF3052				0x0009
+#define RF2853				0x000a
 #define RF3320				0x000b
+#define RF3322				0x000c
+#define RF3853				0x000d
 
 /*
  * Chipset revisions.
@@ -206,10 +213,10 @@
 
 /*
  * WMM_AIFSN_CFG: Aifsn for each EDCA AC
- * AIFSN0: AC_BE
- * AIFSN1: AC_BK
- * AIFSN2: AC_VI
- * AIFSN3: AC_VO
+ * AIFSN0: AC_VO
+ * AIFSN1: AC_VI
+ * AIFSN2: AC_BE
+ * AIFSN3: AC_BK
  */
 #define WMM_AIFSN_CFG			0x0214
 #define WMM_AIFSN_CFG_AIFSN0		FIELD32(0x0000000f)
@@ -219,10 +226,10 @@
 
 /*
  * WMM_CWMIN_CSR: CWmin for each EDCA AC
- * CWMIN0: AC_BE
- * CWMIN1: AC_BK
- * CWMIN2: AC_VI
- * CWMIN3: AC_VO
+ * CWMIN0: AC_VO
+ * CWMIN1: AC_VI
+ * CWMIN2: AC_BE
+ * CWMIN3: AC_BK
  */
 #define WMM_CWMIN_CFG			0x0218
 #define WMM_CWMIN_CFG_CWMIN0		FIELD32(0x0000000f)
@@ -232,10 +239,10 @@
 
 /*
  * WMM_CWMAX_CSR: CWmax for each EDCA AC
- * CWMAX0: AC_BE
- * CWMAX1: AC_BK
- * CWMAX2: AC_VI
- * CWMAX3: AC_VO
+ * CWMAX0: AC_VO
+ * CWMAX1: AC_VI
+ * CWMAX2: AC_BE
+ * CWMAX3: AC_BK
  */
 #define WMM_CWMAX_CFG			0x021c
 #define WMM_CWMAX_CFG_CWMAX0		FIELD32(0x0000000f)
@@ -244,18 +251,18 @@
 #define WMM_CWMAX_CFG_CWMAX3		FIELD32(0x0000f000)
 
 /*
- * AC_TXOP0: AC_BK/AC_BE TXOP register
- * AC0TXOP: AC_BK in unit of 32us
- * AC1TXOP: AC_BE in unit of 32us
+ * AC_TXOP0: AC_VO/AC_VI TXOP register
+ * AC0TXOP: AC_VO in unit of 32us
+ * AC1TXOP: AC_VI in unit of 32us
  */
 #define WMM_TXOP0_CFG			0x0220
 #define WMM_TXOP0_CFG_AC0TXOP		FIELD32(0x0000ffff)
 #define WMM_TXOP0_CFG_AC1TXOP		FIELD32(0xffff0000)
 
 /*
- * AC_TXOP1: AC_VO/AC_VI TXOP register
- * AC2TXOP: AC_VI in unit of 32us
- * AC3TXOP: AC_VO in unit of 32us
+ * AC_TXOP1: AC_BE/AC_BK TXOP register
+ * AC2TXOP: AC_BE in unit of 32us
+ * AC3TXOP: AC_BK in unit of 32us
  */
 #define WMM_TXOP1_CFG			0x0224
 #define WMM_TXOP1_CFG_AC2TXOP		FIELD32(0x0000ffff)
@@ -281,7 +288,7 @@
 #define MCU_CMD_CFG			0x022c
 
 /*
- * AC_BK register offsets
+ * AC_VO register offsets
  */
 #define TX_BASE_PTR0			0x0230
 #define TX_MAX_CNT0			0x0234
@@ -289,7 +296,7 @@
 #define TX_DTX_IDX0			0x023c
 
 /*
- * AC_BE register offsets
+ * AC_VI register offsets
  */
 #define TX_BASE_PTR1			0x0240
 #define TX_MAX_CNT1			0x0244
@@ -297,7 +304,7 @@
 #define TX_DTX_IDX1			0x024c
 
 /*
- * AC_VI register offsets
+ * AC_BE register offsets
  */
 #define TX_BASE_PTR2			0x0250
 #define TX_MAX_CNT2			0x0254
@@ -305,7 +312,7 @@
 #define TX_DTX_IDX2			0x025c
 
 /*
- * AC_VO register offsets
+ * AC_BK register offsets
  */
 #define TX_BASE_PTR3			0x0260
 #define TX_MAX_CNT3			0x0264
@@ -412,10 +419,22 @@
 #define BCN_OFFSET1_BCN7		FIELD32(0xff000000)
 
 /*
- * PBF registers
- * Most are for debug. Driver doesn't touch PBF register.
+ * TXRXQ_PCNT: PBF register
+ * PCNT_TX0Q: Page count for TX hardware queue 0
+ * PCNT_TX1Q: Page count for TX hardware queue 1
+ * PCNT_TX2Q: Page count for TX hardware queue 2
+ * PCNT_RX0Q: Page count for RX hardware queue
  */
 #define TXRXQ_PCNT			0x0438
+#define TXRXQ_PCNT_TX0Q			FIELD32(0x000000ff)
+#define TXRXQ_PCNT_TX1Q			FIELD32(0x0000ff00)
+#define TXRXQ_PCNT_TX2Q			FIELD32(0x00ff0000)
+#define TXRXQ_PCNT_RX0Q			FIELD32(0xff000000)
+
+/*
+ * PBF register
+ * Debug. Driver doesn't touch PBF register.
+ */
 #define PBF_DBG				0x043c
 
 /*
@@ -686,8 +705,18 @@
 
 /*
  * CH_TIME_CFG: count as channel busy
+ * EIFS_BUSY: Count EIFS as channel busy
+ * NAV_BUSY: Count NAS as channel busy
+ * RX_BUSY: Count RX as channel busy
+ * TX_BUSY: Count TX as channel busy
+ * TMR_EN: Enable channel statistics timer
  */
 #define CH_TIME_CFG     	        0x110c
+#define CH_TIME_CFG_EIFS_BUSY		FIELD32(0x00000010)
+#define CH_TIME_CFG_NAV_BUSY		FIELD32(0x00000008)
+#define CH_TIME_CFG_RX_BUSY		FIELD32(0x00000004)
+#define CH_TIME_CFG_TX_BUSY		FIELD32(0x00000002)
+#define CH_TIME_CFG_TMR_EN		FIELD32(0x00000001)
 
 /*
  * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
@@ -960,8 +989,31 @@
 
 /*
  * TXOP_CTRL_CFG:
+ * TIMEOUT_TRUN_EN: Enable/Disable TXOP timeout truncation
+ * AC_TRUN_EN: Enable/Disable truncation for AC change
+ * TXRATEGRP_TRUN_EN: Enable/Disable truncation for TX rate group change
+ * USER_MODE_TRUN_EN: Enable/Disable truncation for user TXOP mode
+ * MIMO_PS_TRUN_EN: Enable/Disable truncation for MIMO PS RTS/CTS
+ * RESERVED_TRUN_EN: Reserved
+ * LSIG_TXOP_EN: Enable/Disable L-SIG TXOP protection
+ * EXT_CCA_EN: Enable/Disable extension channel CCA reference (Defer 40Mhz
+ *	       transmissions if extension CCA is clear).
+ * EXT_CCA_DLY: Extension CCA signal delay time (unit: us)
+ * EXT_CWMIN: CwMin for extension channel backoff
+ *	      0: Disabled
+ *
  */
 #define TXOP_CTRL_CFG			0x1340
+#define TXOP_CTRL_CFG_TIMEOUT_TRUN_EN	FIELD32(0x00000001)
+#define TXOP_CTRL_CFG_AC_TRUN_EN	FIELD32(0x00000002)
+#define TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN	FIELD32(0x00000004)
+#define TXOP_CTRL_CFG_USER_MODE_TRUN_EN	FIELD32(0x00000008)
+#define TXOP_CTRL_CFG_MIMO_PS_TRUN_EN	FIELD32(0x00000010)
+#define TXOP_CTRL_CFG_RESERVED_TRUN_EN	FIELD32(0x00000020)
+#define TXOP_CTRL_CFG_LSIG_TXOP_EN	FIELD32(0x00000040)
+#define TXOP_CTRL_CFG_EXT_CCA_EN	FIELD32(0x00000080)
+#define TXOP_CTRL_CFG_EXT_CCA_DLY	FIELD32(0x0000ff00)
+#define TXOP_CTRL_CFG_EXT_CWMIN		FIELD32(0x000f0000)
 
 /*
  * TX_RTS_CFG:
@@ -1485,17 +1537,17 @@
 #define SHARED_KEY_MODE_BASE		0x7000
 
 #define MAC_WCID_ENTRY(__idx) \
-	( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
+	(MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)))
 #define PAIRWISE_KEY_ENTRY(__idx) \
-	( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+	(PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)))
 #define MAC_IVEIV_ENTRY(__idx) \
-	( MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry)) )
+	(MAC_IVEIV_TABLE_BASE + ((__idx) * sizeof(struct mac_iveiv_entry)))
 #define MAC_WCID_ATTR_ENTRY(__idx) \
-	( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
+	(MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)))
 #define SHARED_KEY_ENTRY(__idx) \
-	( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+	(SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)))
 #define SHARED_KEY_MODE_ENTRY(__idx) \
-	( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
+	(SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)))
 
 struct mac_wcid_entry {
 	u8 mac[6];
@@ -1635,9 +1687,9 @@ struct mac_iveiv_entry {
 #define HW_BEACON_BASE7			0x5bc0
 
 #define HW_BEACON_OFFSET(__index) \
-	( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
-	  (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
-	  (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
+	(((__index) < 4) ? (HW_BEACON_BASE0 + (__index * 0x0200)) : \
+	  (((__index) < 6) ? (HW_BEACON_BASE4 + ((__index - 4) * 0x0200)) : \
+	  (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))))
 
 /*
  * BBP registers.
@@ -1805,32 +1857,51 @@ struct mac_iveiv_entry {
 #define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
 
 /*
- * EEPROM ANTENNA config
+ * EEPROM NIC Configuration 0
  * RXPATH: 1: 1R, 2: 2R, 3: 3R
- * TXPATH: 1: 1T, 2: 2T
- */
-#define	EEPROM_ANTENNA			0x001a
-#define EEPROM_ANTENNA_RXPATH		FIELD16(0x000f)
-#define EEPROM_ANTENNA_TXPATH		FIELD16(0x00f0)
-#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0x0f00)
-
-/*
- * EEPROM NIC config
- * CARDBUS_ACCEL: 0 - enable, 1 - disable
- */
-#define	EEPROM_NIC			0x001b
-#define EEPROM_NIC_HW_RADIO		FIELD16(0x0001)
-#define EEPROM_NIC_DYNAMIC_TX_AGC	FIELD16(0x0002)
-#define EEPROM_NIC_EXTERNAL_LNA_BG	FIELD16(0x0004)
-#define EEPROM_NIC_EXTERNAL_LNA_A	FIELD16(0x0008)
-#define EEPROM_NIC_CARDBUS_ACCEL	FIELD16(0x0010)
-#define EEPROM_NIC_BW40M_SB_BG		FIELD16(0x0020)
-#define EEPROM_NIC_BW40M_SB_A		FIELD16(0x0040)
-#define EEPROM_NIC_WPS_PBC		FIELD16(0x0080)
-#define EEPROM_NIC_BW40M_BG		FIELD16(0x0100)
-#define EEPROM_NIC_BW40M_A		FIELD16(0x0200)
-#define EEPROM_NIC_ANT_DIVERSITY	FIELD16(0x0800)
-#define EEPROM_NIC_DAC_TEST		FIELD16(0x8000)
+ * TXPATH: 1: 1T, 2: 2T, 3: 3T
+ * RF_TYPE: RFIC type
+ */
+#define	EEPROM_NIC_CONF0		0x001a
+#define EEPROM_NIC_CONF0_RXPATH		FIELD16(0x000f)
+#define EEPROM_NIC_CONF0_TXPATH		FIELD16(0x00f0)
+#define EEPROM_NIC_CONF0_RF_TYPE		FIELD16(0x0f00)
+
+/*
+ * EEPROM NIC Configuration 1
+ * HW_RADIO: 0: disable, 1: enable
+ * EXTERNAL_TX_ALC: 0: disable, 1: enable
+ * EXTERNAL_LNA_2G: 0: disable, 1: enable
+ * EXTERNAL_LNA_5G: 0: disable, 1: enable
+ * CARDBUS_ACCEL: 0: enable, 1: disable
+ * BW40M_SB_2G: 0: disable, 1: enable
+ * BW40M_SB_5G: 0: disable, 1: enable
+ * WPS_PBC: 0: disable, 1: enable
+ * BW40M_2G: 0: enable, 1: disable
+ * BW40M_5G: 0: enable, 1: disable
+ * BROADBAND_EXT_LNA: 0: disable, 1: enable
+ * ANT_DIVERSITY: 00: Disable, 01: Diversity,
+ * 				  10: Main antenna, 11: Aux antenna
+ * INTERNAL_TX_ALC: 0: disable, 1: enable
+ * BT_COEXIST: 0: disable, 1: enable
+ * DAC_TEST: 0: disable, 1: enable
+ */
+#define	EEPROM_NIC_CONF1		0x001b
+#define EEPROM_NIC_CONF1_HW_RADIO		FIELD16(0x0001)
+#define EEPROM_NIC_CONF1_EXTERNAL_TX_ALC		FIELD16(0x0002)
+#define EEPROM_NIC_CONF1_EXTERNAL_LNA_2G		FIELD16(0x0004)
+#define EEPROM_NIC_CONF1_EXTERNAL_LNA_5G		FIELD16(0x0008)
+#define EEPROM_NIC_CONF1_CARDBUS_ACCEL		FIELD16(0x0010)
+#define EEPROM_NIC_CONF1_BW40M_SB_2G		FIELD16(0x0020)
+#define EEPROM_NIC_CONF1_BW40M_SB_5G		FIELD16(0x0040)
+#define EEPROM_NIC_CONF1_WPS_PBC		FIELD16(0x0080)
+#define EEPROM_NIC_CONF1_BW40M_2G		FIELD16(0x0100)
+#define EEPROM_NIC_CONF1_BW40M_5G		FIELD16(0x0200)
+#define EEPROM_NIC_CONF1_BROADBAND_EXT_LNA		FIELD16(0x400)
+#define EEPROM_NIC_CONF1_ANT_DIVERSITY		FIELD16(0x1800)
+#define EEPROM_NIC_CONF1_INTERNAL_TX_ALC		FIELD16(0x2000)
+#define EEPROM_NIC_CONF1_BT_COEXIST		FIELD16(0x4000)
+#define EEPROM_NIC_CONF1_DAC_TEST		FIELD16(0x8000)
 
 /*
  * EEPROM frequency
@@ -1852,9 +1923,9 @@ struct mac_iveiv_entry {
  * POLARITY_GPIO_4: Polarity GPIO4 setting.
  * LED_MODE: Led mode.
  */
-#define EEPROM_LED1			0x001e
-#define EEPROM_LED2			0x001f
-#define EEPROM_LED3			0x0020
+#define EEPROM_LED_AG_CONF		0x001e
+#define EEPROM_LED_ACT_CONF		0x001f
+#define EEPROM_LED_POLARITY		0x0020
 #define EEPROM_LED_POLARITY_RDY_BG	FIELD16(0x0001)
 #define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
 #define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
@@ -1866,6 +1937,17 @@ struct mac_iveiv_entry {
 #define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
 
 /*
+ * EEPROM NIC Configuration 2
+ * RX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
+ * TX_STREAM: 0: Reserved, 1: 1 Stream, 2: 2 Stream
+ * CRYSTAL: 00: Reserved, 01: One crystal, 10: Two crystal, 11: Reserved
+ */
+#define EEPROM_NIC_CONF2		0x0021
+#define EEPROM_NIC_CONF2_RX_STREAM		FIELD16(0x000f)
+#define EEPROM_NIC_CONF2_TX_STREAM		FIELD16(0x00f0)
+#define EEPROM_NIC_CONF2_CRYSTAL		FIELD16(0x0600)
+
+/*
  * EEPROM LNA
  */
 #define EEPROM_LNA			0x0022
@@ -1915,7 +1997,7 @@ struct mac_iveiv_entry {
 
 /*
  * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
- *	This is delta in 40MHZ.
+ * This is delta in 40MHZ.
  * VALUE: Tx Power dalta value (MAX=4)
  * TYPE: 1: Plus the delta value, 0: minus the delta value
  * TXPOWER: Enable:
@@ -1971,9 +2053,9 @@ struct mac_iveiv_entry {
 #define MCU_CURRENT			0x36
 #define MCU_LED				0x50
 #define MCU_LED_STRENGTH		0x51
-#define MCU_LED_1			0x52
-#define MCU_LED_2			0x53
-#define MCU_LED_3			0x54
+#define MCU_LED_AG_CONF		0x52
+#define MCU_LED_ACT_CONF		0x53
+#define MCU_LED_LED_POLARITY		0x54
 #define MCU_RADAR			0x60
 #define MCU_BOOT_SIGNAL			0x72
 #define MCU_BBP_SIGNAL			0x80
@@ -1987,8 +2069,8 @@ struct mac_iveiv_entry {
 /*
  * DMA descriptor defines.
  */
-#define TXWI_DESC_SIZE			( 4 * sizeof(__le32) )
-#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+#define TXWI_DESC_SIZE			(4 * sizeof(__le32))
+#define RXWI_DESC_SIZE			(4 * sizeof(__le32))
 
 /*
  * TX WI structure
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 5f00e00789d..54917a28139 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -277,13 +277,17 @@ int rt2800_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
 	unsigned int i;
 	u32 reg;
 
+	/*
+	 * Some devices are really slow to respond here. Wait a whole second
+	 * before timing out.
+	 */
 	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 		rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
 		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
 		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
 			return 0;
 
-		msleep(1);
+		msleep(10);
 	}
 
 	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
@@ -483,7 +487,7 @@ void rt2800_write_tx_data(struct queue_entry *entry,
 			   txdesc->key_idx : 0xff);
 	rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
 			   txdesc->length);
-	rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE, txdesc->qid);
+	rt2x00_set_field32(&word, TXWI_W1_PACKETID_QUEUE, entry->queue->qid);
 	rt2x00_set_field32(&word, TXWI_W1_PACKETID_ENTRY, (entry->entry_idx % 3) + 1);
 	rt2x00_desc_write(txwi, 1, word);
 
@@ -727,7 +731,7 @@ void rt2800_txdone(struct rt2x00_dev *rt2x00dev)
 	 * that the TX_STA_FIFO stack has a size of 16. We stick to our
 	 * tx ring size for now.
 	 */
-	for (i = 0; i < TX_ENTRIES; i++) {
+	for (i = 0; i < rt2x00dev->ops->tx->entry_num; i++) {
 		rt2800_register_read(rt2x00dev, TX_STA_FIFO, &reg);
 		if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
 			break;
@@ -768,6 +772,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	unsigned int beacon_base;
+	unsigned int padding_len;
 	u32 reg;
 
 	/*
@@ -802,11 +807,13 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
 	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 
 	/*
-	 * Write entire beacon with TXWI to register.
+	 * Write entire beacon with TXWI and padding to register.
 	 */
+	padding_len = roundup(entry->skb->len, 4) - entry->skb->len;
+	skb_pad(entry->skb, padding_len);
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2800_register_multiwrite(rt2x00dev, beacon_base,
-				   entry->skb->data, entry->skb->len);
+	rt2800_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data,
+				   entry->skb->len + padding_len);
 
 	/*
 	 * Enable beaconing again.
@@ -824,7 +831,7 @@ void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc)
 }
 EXPORT_SYMBOL_GPL(rt2800_write_beacon);
 
-static void inline rt2800_clear_beacon(struct rt2x00_dev *rt2x00dev,
+static inline void rt2800_clear_beacon(struct rt2x00_dev *rt2x00dev,
 				       unsigned int beacon_base)
 {
 	int i;
@@ -1144,6 +1151,7 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
 			struct rt2x00intf_conf *conf, const unsigned int flags)
 {
 	u32 reg;
+	bool update_bssid = false;
 
 	if (flags & CONFIG_UPDATE_TYPE) {
 		/*
@@ -1173,6 +1181,16 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
 	}
 
 	if (flags & CONFIG_UPDATE_MAC) {
+		if (flags & CONFIG_UPDATE_TYPE &&
+		    conf->sync == TSF_SYNC_AP_NONE) {
+			/*
+			 * The BSSID register has to be set to our own mac
+			 * address in AP mode.
+			 */
+			memcpy(conf->bssid, conf->mac, sizeof(conf->mac));
+			update_bssid = true;
+		}
+
 		if (!is_zero_ether_addr((const u8 *)conf->mac)) {
 			reg = le32_to_cpu(conf->mac[1]);
 			rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
@@ -1183,7 +1201,7 @@ void rt2800_config_intf(struct rt2x00_dev *rt2x00dev, struct rt2x00_intf *intf,
 					      conf->mac, sizeof(conf->mac));
 	}
 
-	if (flags & CONFIG_UPDATE_BSSID) {
+	if ((flags & CONFIG_UPDATE_BSSID) || update_bssid) {
 		if (!is_zero_ether_addr((const u8 *)conf->bssid)) {
 			reg = le32_to_cpu(conf->bssid[1]);
 			rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 3);
@@ -1529,7 +1547,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	    rt2x00_rf(rt2x00dev, RF3020) ||
 	    rt2x00_rf(rt2x00dev, RF3021) ||
 	    rt2x00_rf(rt2x00dev, RF3022) ||
-	    rt2x00_rf(rt2x00dev, RF3052))
+	    rt2x00_rf(rt2x00dev, RF3052) ||
+	    rt2x00_rf(rt2x00dev, RF3320))
 		rt2800_config_channel_rf3xxx(rt2x00dev, conf, rf, info);
 	else
 		rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
@@ -1609,6 +1628,13 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
 	}
 
 	msleep(1);
+
+	/*
+	 * Clear channel statistic counters
+	 */
+	rt2800_register_read(rt2x00dev, CH_IDLE_STA, &reg);
+	rt2800_register_read(rt2x00dev, CH_BUSY_STA, &reg);
+	rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &reg);
 }
 
 static void rt2800_config_txpower(struct rt2x00_dev *rt2x00dev,
@@ -1914,8 +1940,8 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 		if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
 		    rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
 		    rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E)) {
-			rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-			if (rt2x00_get_field16(eeprom, EEPROM_NIC_DAC_TEST))
+			rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
+			if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
 				rt2800_register_write(rt2x00dev, TX_SW_CFG2,
 						      0x0000002c);
 			else
@@ -2097,7 +2123,23 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 		rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
 	}
 
-	rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
+	/*
+	 * The legacy driver also sets TXOP_CTRL_CFG_RESERVED_TRUN_EN to 1
+	 * although it is reserved.
+	 */
+	rt2800_register_read(rt2x00dev, TXOP_CTRL_CFG, &reg);
+	rt2x00_set_field32(&reg, TXOP_CTRL_CFG_TIMEOUT_TRUN_EN, 1);
+	rt2x00_set_field32(&reg, TXOP_CTRL_CFG_AC_TRUN_EN, 1);
+	rt2x00_set_field32(&reg, TXOP_CTRL_CFG_TXRATEGRP_TRUN_EN, 1);
+	rt2x00_set_field32(&reg, TXOP_CTRL_CFG_USER_MODE_TRUN_EN, 1);
+	rt2x00_set_field32(&reg, TXOP_CTRL_CFG_MIMO_PS_TRUN_EN, 1);
+	rt2x00_set_field32(&reg, TXOP_CTRL_CFG_RESERVED_TRUN_EN, 1);
+	rt2x00_set_field32(&reg, TXOP_CTRL_CFG_LSIG_TXOP_EN, 0);
+	rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CCA_EN, 0);
+	rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CCA_DLY, 88);
+	rt2x00_set_field32(&reg, TXOP_CTRL_CFG_EXT_CWMIN, 0);
+	rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, reg);
+
 	rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
 
 	rt2800_register_read(rt2x00dev, TX_RTS_CFG, &reg);
@@ -2134,7 +2176,7 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 					 SHARED_KEY_MODE_ENTRY(i), 0);
 
 	for (i = 0; i < 256; i++) {
-		u32 wcid[2] = { 0xffffffff, 0x00ffffff };
+		static const u32 wcid[2] = { 0xffffffff, 0x00ffffff };
 		rt2800_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
 					      wcid, sizeof(wcid));
 
@@ -2227,6 +2269,17 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	rt2x00_set_field32(&reg, INT_TIMER_CFG_PRE_TBTT_TIMER, 6 << 4);
 	rt2800_register_write(rt2x00dev, INT_TIMER_CFG, reg);
 
+	/*
+	 * Set up channel statistics timer
+	 */
+	rt2800_register_read(rt2x00dev, CH_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, CH_TIME_CFG_EIFS_BUSY, 1);
+	rt2x00_set_field32(&reg, CH_TIME_CFG_NAV_BUSY, 1);
+	rt2x00_set_field32(&reg, CH_TIME_CFG_RX_BUSY, 1);
+	rt2x00_set_field32(&reg, CH_TIME_CFG_TX_BUSY, 1);
+	rt2x00_set_field32(&reg, CH_TIME_CFG_TMR_EN, 1);
+	rt2800_register_write(rt2x00dev, CH_TIME_CFG, reg);
+
 	return 0;
 }
 
@@ -2344,10 +2397,10 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
 	    rt2x00_rt(rt2x00dev, RT3390)) {
 		rt2800_bbp_read(rt2x00dev, 138, &value);
 
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-		if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
+		if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
 			value |= 0x20;
-		if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1)
+		if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
 			value &= ~0x02;
 
 		rt2800_bbp_write(rt2x00dev, 138, value);
@@ -2559,8 +2612,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 		rt2x00_set_field32(&reg, LDO_CFG0_BGSEL, 1);
 		if (rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
 		    rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E)) {
-			rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
-			if (rt2x00_get_field16(eeprom, EEPROM_NIC_DAC_TEST))
+			rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
+			if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_DAC_TEST))
 				rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 3);
 			else
 				rt2x00_set_field32(&reg, LDO_CFG0_LDO_CORE_VLEVEL, 0);
@@ -2633,10 +2686,10 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	if (rt2x00_rt(rt2x00dev, RT3090)) {
 		rt2800_bbp_read(rt2x00dev, 138, &bbp);
 
-		rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
-		if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) == 1)
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
+		if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
 			rt2x00_set_field8(&bbp, BBP138_RX_ADC1, 0);
-		if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) == 1)
+		if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
 			rt2x00_set_field8(&bbp, BBP138_TX_DAC1, 1);
 
 		rt2800_bbp_write(rt2x00dev, 138, bbp);
@@ -2735,16 +2788,16 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize LED control
 	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
-	rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED_AG_CONF, &word);
+	rt2800_mcu_request(rt2x00dev, MCU_LED_AG_CONF, 0xff,
 			   word & 0xff, (word >> 8) & 0xff);
 
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
-	rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED_ACT_CONF, &word);
+	rt2800_mcu_request(rt2x00dev, MCU_LED_ACT_CONF, 0xff,
 			   word & 0xff, (word >> 8) & 0xff);
 
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
-	rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED_POLARITY, &word);
+	rt2800_mcu_request(rt2x00dev, MCU_LED_LED_POLARITY, 0xff,
 			   word & 0xff, (word >> 8) & 0xff);
 
 	return 0;
@@ -2838,38 +2891,41 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 		EEPROM(rt2x00dev, "MAC: %pM\n", mac);
 	}
 
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &word);
 	if (word == 0xffff) {
-		rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
-		rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
-		rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF0_TXPATH, 1);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RF_TYPE, RF2820);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
 		EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
 	} else if (rt2x00_rt(rt2x00dev, RT2860) ||
 		   rt2x00_rt(rt2x00dev, RT2872)) {
 		/*
 		 * There is a max of 2 RX streams for RT28x0 series
 		 */
-		if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
-			rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+		if (rt2x00_get_field16(word, EEPROM_NIC_CONF0_RXPATH) > 2)
+			rt2x00_set_field16(&word, EEPROM_NIC_CONF0_RXPATH, 2);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC_CONF0, word);
 	}
 
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &word);
 	if (word == 0xffff) {
-		rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_ANT_DIVERSITY, 0);
-		rt2x00_set_field16(&word, EEPROM_NIC_DAC_TEST, 0);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_HW_RADIO, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_TX_ALC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_CARDBUS_ACCEL, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_2G, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_SB_5G, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_WPS_PBC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_2G, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BW40M_5G, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BROADBAND_EXT_LNA, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_ANT_DIVERSITY, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_INTERNAL_TX_ALC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_BT_COEXIST, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CONF1_DAC_TEST, 0);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC_CONF1, word);
 		EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
 	}
 
@@ -2884,9 +2940,9 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 				   LED_MODE_TXRX_ACTIVITY);
 		rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
 		rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
-		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED_AG_CONF, 0x5555);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED_ACT_CONF, 0x2221);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED_POLARITY, 0xa9f8);
 		EEPROM(rt2x00dev, "Led Mode: 0x%04x\n", word);
 	}
 
@@ -2950,12 +3006,12 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Read EEPROM word for configuration.
 	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
 
 	/*
 	 * Identify RF chipset.
 	 */
-	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+	value = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RF_TYPE);
 	rt2800_register_read(rt2x00dev, MAC_CSR0, &reg);
 
 	rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET),
@@ -2981,7 +3037,8 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	    !rt2x00_rf(rt2x00dev, RF2020) &&
 	    !rt2x00_rf(rt2x00dev, RF3021) &&
 	    !rt2x00_rf(rt2x00dev, RF3022) &&
-	    !rt2x00_rf(rt2x00dev, RF3052)) {
+	    !rt2x00_rf(rt2x00dev, RF3052) &&
+	    !rt2x00_rf(rt2x00dev, RF3320)) {
 		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
 		return -ENODEV;
 	}
@@ -2990,9 +3047,9 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	 * Identify default antenna configuration.
 	 */
 	rt2x00dev->default_ant.tx =
-	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH);
+	    rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH);
 	rt2x00dev->default_ant.rx =
-	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH);
+	    rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH);
 
 	/*
 	 * Read frequency offset and RF programming sequence.
@@ -3003,17 +3060,17 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Read external LNA informations.
 	 */
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
 
-	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_5G))
 		__set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
-	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_LNA_2G))
 		__set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
 
 	/*
 	 * Detect if this device has an hardware controlled radio.
 	 */
-	if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_HW_RADIO))
 		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
 
 	/*
@@ -3225,7 +3282,7 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	rt2x00dev->hw->max_report_rates = 7;
 	rt2x00dev->hw->max_rate_tries = 1;
 
-	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
 
 	/*
 	 * Initialize hw_mode information.
@@ -3245,7 +3302,8 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	} else if (rt2x00_rf(rt2x00dev, RF3020) ||
 		   rt2x00_rf(rt2x00dev, RF2020) ||
 		   rt2x00_rf(rt2x00dev, RF3021) ||
-		   rt2x00_rf(rt2x00dev, RF3022)) {
+		   rt2x00_rf(rt2x00dev, RF3022) ||
+		   rt2x00_rf(rt2x00dev, RF3320)) {
 		spec->num_channels = 14;
 		spec->channels = rf_vals_3x;
 	} else if (rt2x00_rf(rt2x00dev, RF3052)) {
@@ -3268,11 +3326,11 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	    IEEE80211_HT_CAP_SGI_20 |
 	    IEEE80211_HT_CAP_SGI_40;
 
-	if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) >= 2)
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) >= 2)
 		spec->ht.cap |= IEEE80211_HT_CAP_TX_STBC;
 
 	spec->ht.cap |=
-	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH) <<
+	    rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) <<
 		IEEE80211_HT_CAP_RX_STBC_SHIFT;
 
 	spec->ht.ampdu_factor = 3;
@@ -3280,10 +3338,10 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 	spec->ht.mcs.tx_params =
 	    IEEE80211_HT_MCS_TX_DEFINED |
 	    IEEE80211_HT_MCS_TX_RX_DIFF |
-	    ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
+	    ((rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) - 1) <<
 		IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
 
-	switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
+	switch (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH)) {
 	case 3:
 		spec->ht.mcs.rx_mask[2] = 0xff;
 	case 2:
@@ -3502,6 +3560,37 @@ int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 }
 EXPORT_SYMBOL_GPL(rt2800_ampdu_action);
 
+int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
+		      struct survey_info *survey)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct ieee80211_conf *conf = &hw->conf;
+	u32 idle, busy, busy_ext;
+
+	if (idx != 0)
+		return -ENOENT;
+
+	survey->channel = conf->channel;
+
+	rt2800_register_read(rt2x00dev, CH_IDLE_STA, &idle);
+	rt2800_register_read(rt2x00dev, CH_BUSY_STA, &busy);
+	rt2800_register_read(rt2x00dev, CH_BUSY_STA_SEC, &busy_ext);
+
+	if (idle || busy) {
+		survey->filled = SURVEY_INFO_CHANNEL_TIME |
+				 SURVEY_INFO_CHANNEL_TIME_BUSY |
+				 SURVEY_INFO_CHANNEL_TIME_EXT_BUSY;
+
+		survey->channel_time = (idle + busy) / 1000;
+		survey->channel_time_busy = busy / 1000;
+		survey->channel_time_ext_busy = busy_ext / 1000;
+	}
+
+	return 0;
+
+}
+EXPORT_SYMBOL_GPL(rt2800_get_survey);
+
 MODULE_AUTHOR(DRV_PROJECT ", Bartlomiej Zolnierkiewicz");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DESCRIPTION("Ralink RT2800 library");
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 81cbc92e785..e3c995a9dec 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -199,5 +199,7 @@ u64 rt2800_get_tsf(struct ieee80211_hw *hw);
 int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			enum ieee80211_ampdu_mlme_action action,
 			struct ieee80211_sta *sta, u16 tid, u16 *ssn);
+int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
+		      struct survey_info *survey);
 
 #endif /* RT2800LIB_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index b2673953598..aa97971a38a 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -84,20 +84,22 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
 	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
 }
 
-#ifdef CONFIG_RT2800PCI_SOC
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
 static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
 {
-	u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
+	void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
 
 	memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
+
+	iounmap(base_addr);
 }
 #else
 static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
 {
 }
-#endif /* CONFIG_RT2800PCI_SOC */
+#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
 
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
 static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 {
 	struct rt2x00_dev *rt2x00dev = eeprom->data;
@@ -181,7 +183,78 @@ static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev)
 static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
 {
 }
-#endif /* CONFIG_RT2800PCI_PCI */
+#endif /* CONFIG_PCI */
+
+/*
+ * Queue handlers.
+ */
+static void rt2800pci_start_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+		rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
+		rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+		break;
+	case QID_BEACON:
+		rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
+		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		break;
+	default:
+		break;
+	};
+}
+
+static void rt2800pci_kick_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	struct queue_entry *entry;
+
+	switch (queue->qid) {
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		entry = rt2x00queue_get_entry(queue, Q_INDEX);
+		rt2800_register_write(rt2x00dev, TX_CTX_IDX(queue->qid), entry->entry_idx);
+		break;
+	case QID_MGMT:
+		entry = rt2x00queue_get_entry(queue, Q_INDEX);
+		rt2800_register_write(rt2x00dev, TX_CTX_IDX(5), entry->entry_idx);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rt2800pci_stop_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+		rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
+		rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+		break;
+	case QID_BEACON:
+		rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		break;
+	default:
+		break;
+	}
+}
 
 /*
  * Firmware functions
@@ -321,18 +394,6 @@ static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
 /*
  * Device state switch handlers.
  */
-static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
-				enum dev_state state)
-{
-	u32 reg;
-
-	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
-			   (state == STATE_RADIO_RX_ON) ||
-			   (state == STATE_RADIO_RX_ON_LINK));
-	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-}
-
 static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 				 enum dev_state state)
 {
@@ -442,7 +503,7 @@ static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
 	 * if the device is booting and wasn't asleep it will return
 	 * failure when attempting to wakeup.
 	 */
-	rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+	rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2);
 
 	if (state == STATE_AWAKE) {
 		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
@@ -476,12 +537,6 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt2800pci_disable_radio(rt2x00dev);
 		rt2800pci_set_state(rt2x00dev, STATE_SLEEP);
 		break;
-	case STATE_RADIO_RX_ON:
-	case STATE_RADIO_RX_ON_LINK:
-	case STATE_RADIO_RX_OFF:
-	case STATE_RADIO_RX_OFF_LINK:
-		rt2800pci_toggle_rx(rt2x00dev, state);
-		break;
 	case STATE_RADIO_IRQ_ON:
 	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
@@ -567,41 +622,6 @@ static void rt2800pci_write_tx_desc(struct queue_entry *entry,
 }
 
 /*
- * TX data initialization
- */
-static void rt2800pci_kick_tx_queue(struct data_queue *queue)
-{
-	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	struct queue_entry *entry = rt2x00queue_get_entry(queue, Q_INDEX);
-	unsigned int qidx;
-
-	if (queue->qid == QID_MGMT)
-		qidx = 5;
-	else
-		qidx = queue->qid;
-
-	rt2800_register_write(rt2x00dev, TX_CTX_IDX(qidx), entry->entry_idx);
-}
-
-static void rt2800pci_kill_tx_queue(struct data_queue *queue)
-{
-	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	u32 reg;
-
-	if (queue->qid == QID_BEACON) {
-		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, 0);
-		return;
-	}
-
-	rt2800_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
-	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, (queue->qid == QID_AC_BE));
-	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, (queue->qid == QID_AC_BK));
-	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, (queue->qid == QID_AC_VI));
-	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, (queue->qid == QID_AC_VO));
-	rt2800_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
-}
-
-/*
  * RX control handlers
  */
 static void rt2800pci_fill_rxdone(struct queue_entry *entry,
@@ -668,14 +688,7 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 	u32 status;
 	u8 qid;
 
-	while (!kfifo_is_empty(&rt2x00dev->txstatus_fifo)) {
-		/* Now remove the tx status from the FIFO */
-		if (kfifo_out(&rt2x00dev->txstatus_fifo, &status,
-			      sizeof(status)) != sizeof(status)) {
-			WARN_ON(1);
-			break;
-		}
-
+	while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) {
 		qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE);
 		if (qid >= QID_RX) {
 			/*
@@ -683,7 +696,7 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 			 * this tx status.
 			 */
 			WARNING(rt2x00dev, "Got TX status report with "
-					   "unexpected pid %u, dropping", qid);
+					   "unexpected pid %u, dropping\n", qid);
 			break;
 		}
 
@@ -694,7 +707,7 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 			 * processing here and drop the tx status
 			 */
 			WARNING(rt2x00dev, "Got TX status for an unavailable "
-					   "queue %u, dropping", qid);
+					   "queue %u, dropping\n", qid);
 			break;
 		}
 
@@ -704,7 +717,7 @@ static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
 			 * and drop the tx status.
 			 */
 			WARNING(rt2x00dev, "Got TX status for an empty "
-					   "queue %u, dropping", qid);
+					   "queue %u, dropping\n", qid);
 			break;
 		}
 
@@ -777,20 +790,13 @@ static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
 	 * Since we have only one producer and one consumer we don't
 	 * need to lock the kfifo.
 	 */
-	for (i = 0; i < TX_ENTRIES; i++) {
+	for (i = 0; i < rt2x00dev->ops->tx->entry_num; i++) {
 		rt2800_register_read(rt2x00dev, TX_STA_FIFO, &status);
 
 		if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID))
 			break;
 
-		if (kfifo_is_full(&rt2x00dev->txstatus_fifo)) {
-			WARNING(rt2x00dev, "TX status FIFO overrun,"
-				" drop tx status report.\n");
-			break;
-		}
-
-		if (kfifo_in(&rt2x00dev->txstatus_fifo, &status,
-			     sizeof(status)) != sizeof(status)) {
+		if (!kfifo_put(&rt2x00dev->txstatus_fifo, &status)) {
 			WARNING(rt2x00dev, "TX status FIFO overrun,"
 				"drop tx status report.\n");
 			break;
@@ -912,6 +918,7 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
 	__set_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags);
 	if (!modparam_nohwcrypt)
 		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
 	__set_bit(DRIVER_SUPPORT_LINK_TUNING, &rt2x00dev->flags);
@@ -943,6 +950,8 @@ static const struct ieee80211_ops rt2800pci_mac80211_ops = {
 	.get_tsf		= rt2800_get_tsf,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
 	.ampdu_action		= rt2800_ampdu_action,
+	.flush			= rt2x00mac_flush,
+	.get_survey		= rt2800_get_survey,
 };
 
 static const struct rt2800_ops rt2800pci_rt2800_ops = {
@@ -975,11 +984,12 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.link_stats		= rt2800_link_stats,
 	.reset_tuner		= rt2800_reset_tuner,
 	.link_tuner		= rt2800_link_tuner,
+	.start_queue		= rt2800pci_start_queue,
+	.kick_queue		= rt2800pci_kick_queue,
+	.stop_queue		= rt2800pci_stop_queue,
 	.write_tx_desc		= rt2800pci_write_tx_desc,
 	.write_tx_data		= rt2800_write_tx_data,
 	.write_beacon		= rt2800_write_beacon,
-	.kick_tx_queue		= rt2800pci_kick_tx_queue,
-	.kill_tx_queue		= rt2800pci_kill_tx_queue,
 	.fill_rxdone		= rt2800pci_fill_rxdone,
 	.config_shared_key	= rt2800_config_shared_key,
 	.config_pairwise_key	= rt2800_config_pairwise_key,
@@ -991,21 +1001,21 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 };
 
 static const struct data_queue_desc rt2800pci_queue_rx = {
-	.entry_num		= RX_ENTRIES,
+	.entry_num		= 128,
 	.data_size		= AGGREGATION_SIZE,
 	.desc_size		= RXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
 };
 
 static const struct data_queue_desc rt2800pci_queue_tx = {
-	.entry_num		= TX_ENTRIES,
+	.entry_num		= 64,
 	.data_size		= AGGREGATION_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
 };
 
 static const struct data_queue_desc rt2800pci_queue_bcn = {
-	.entry_num		= 8 * BEACON_ENTRIES,
+	.entry_num		= 8,
 	.data_size		= 0, /* No DMA required for beacons */
 	.desc_size		= TXWI_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
@@ -1033,12 +1043,15 @@ static const struct rt2x00_ops rt2800pci_ops = {
 /*
  * RT2800pci module information.
  */
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
 static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
 	{ PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) },
@@ -1046,12 +1059,10 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
 	{ PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) },
-	{ PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
-#ifdef CONFIG_RT2800PCI_RT30XX
-	{ PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) },
-	{ PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) },
-	{ PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) },
 	{ PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
+#ifdef CONFIG_RT2800PCI_RT33XX
+	{ PCI_DEVICE(0x1814, 0x3390), PCI_DEVICE_DATA(&rt2800pci_ops) },
 #endif
 #ifdef CONFIG_RT2800PCI_RT35XX
 	{ PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) },
@@ -1062,19 +1073,19 @@ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = {
 #endif
 	{ 0, }
 };
-#endif /* CONFIG_RT2800PCI_PCI */
+#endif /* CONFIG_PCI */
 
 MODULE_AUTHOR(DRV_PROJECT);
 MODULE_VERSION(DRV_VERSION);
 MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
 MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
 MODULE_FIRMWARE(FIRMWARE_RT2860);
 MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
-#endif /* CONFIG_RT2800PCI_PCI */
+#endif /* CONFIG_PCI */
 MODULE_LICENSE("GPL");
 
-#ifdef CONFIG_RT2800PCI_SOC
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
 static int rt2800soc_probe(struct platform_device *pdev)
 {
 	return rt2x00soc_probe(pdev, &rt2800pci_ops);
@@ -1091,9 +1102,9 @@ static struct platform_driver rt2800soc_driver = {
 	.suspend	= rt2x00soc_suspend,
 	.resume		= rt2x00soc_resume,
 };
-#endif /* CONFIG_RT2800PCI_SOC */
+#endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */
 
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
 static struct pci_driver rt2800pci_driver = {
 	.name		= KBUILD_MODNAME,
 	.id_table	= rt2800pci_device_table,
@@ -1102,21 +1113,21 @@ static struct pci_driver rt2800pci_driver = {
 	.suspend	= rt2x00pci_suspend,
 	.resume		= rt2x00pci_resume,
 };
-#endif /* CONFIG_RT2800PCI_PCI */
+#endif /* CONFIG_PCI */
 
 static int __init rt2800pci_init(void)
 {
 	int ret = 0;
 
-#ifdef CONFIG_RT2800PCI_SOC
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
 	ret = platform_driver_register(&rt2800soc_driver);
 	if (ret)
 		return ret;
 #endif
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
 	ret = pci_register_driver(&rt2800pci_driver);
 	if (ret) {
-#ifdef CONFIG_RT2800PCI_SOC
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
 		platform_driver_unregister(&rt2800soc_driver);
 #endif
 		return ret;
@@ -1128,10 +1139,10 @@ static int __init rt2800pci_init(void)
 
 static void __exit rt2800pci_exit(void)
 {
-#ifdef CONFIG_RT2800PCI_PCI
+#ifdef CONFIG_PCI
 	pci_unregister_driver(&rt2800pci_driver);
 #endif
-#ifdef CONFIG_RT2800PCI_SOC
+#if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X)
 	platform_driver_unregister(&rt2800soc_driver);
 #endif
 }
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h
index 5a8dda9b5b5..70e050d904c 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.h
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -38,10 +38,10 @@
  * Queue register offset macros
  */
 #define TX_QUEUE_REG_OFFSET		0x10
-#define TX_BASE_PTR(__x)		TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET)
-#define TX_MAX_CNT(__x)			TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET)
-#define TX_CTX_IDX(__x)			TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
-#define TX_DTX_IDX(__x)			TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
+#define TX_BASE_PTR(__x)		(TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET))
+#define TX_MAX_CNT(__x)			(TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET))
+#define TX_CTX_IDX(__x)			(TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET))
+#define TX_DTX_IDX(__x)			(TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET))
 
 /*
  * 8051 firmware image.
@@ -52,8 +52,8 @@
 /*
  * DMA descriptor defines.
  */
-#define TXD_DESC_SIZE			( 4 * sizeof(__le32) )
-#define RXD_DESC_SIZE			( 4 * sizeof(__le32) )
+#define TXD_DESC_SIZE			(4 * sizeof(__le32))
+#define RXD_DESC_SIZE			(4 * sizeof(__le32))
 
 /*
  * TX descriptor format for TX, PRIO and Beacon Ring.
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 3dff56ec195..b97a4a54ff4 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -45,11 +45,60 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 0;
+static int modparam_nohwcrypt;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
 /*
+ * Queue handlers.
+ */
+static void rt2800usb_start_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+		rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
+		rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+		break;
+	case QID_BEACON:
+		rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
+		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rt2800usb_stop_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+		rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
+		rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+		break;
+	case QID_BEACON:
+		rt2800_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+		rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
  * Firmware functions
  */
 static char *rt2800usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
@@ -107,18 +156,6 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev,
 /*
  * Device state switch handlers.
  */
-static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
-				enum dev_state state)
-{
-	u32 reg;
-
-	rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
-	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
-			   (state == STATE_RADIO_RX_ON) ||
-			   (state == STATE_RADIO_RX_ON_LINK));
-	rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
-}
-
 static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
@@ -165,7 +202,8 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 	 * this limit so reduce the number to prevent errors.
 	 */
 	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_LIMIT,
-			   ((RX_ENTRIES * DATA_FRAME_SIZE) / 1024) - 3);
+			   ((rt2x00dev->ops->rx->entry_num * DATA_FRAME_SIZE)
+			    / 1024) - 3);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
 	rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
 	rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg);
@@ -183,9 +221,9 @@ static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
 			       enum dev_state state)
 {
 	if (state == STATE_AWAKE)
-		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
+		rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 2);
 	else
-		rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+		rt2800_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0xff, 2);
 
 	return 0;
 }
@@ -214,12 +252,6 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 		rt2800usb_disable_radio(rt2x00dev);
 		rt2800usb_set_state(rt2x00dev, STATE_SLEEP);
 		break;
-	case STATE_RADIO_RX_ON:
-	case STATE_RADIO_RX_ON_LINK:
-	case STATE_RADIO_RX_OFF:
-	case STATE_RADIO_RX_OFF_LINK:
-		rt2800usb_toggle_rx(rt2x00dev, state);
-		break;
 	case STATE_RADIO_IRQ_ON:
 	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
@@ -245,6 +277,49 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 }
 
 /*
+ * Watchdog handlers
+ */
+static void rt2800usb_watchdog(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	rt2800_register_read(rt2x00dev, TXRXQ_PCNT, &reg);
+	if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q)) {
+		WARNING(rt2x00dev, "TX HW queue 0 timed out,"
+			" invoke forced kick\n");
+
+		rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40012);
+
+		for (i = 0; i < 10; i++) {
+			udelay(10);
+			if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX0Q))
+				break;
+		}
+
+		rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+	}
+
+	rt2800_register_read(rt2x00dev, TXRXQ_PCNT, &reg);
+	if (rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q)) {
+		WARNING(rt2x00dev, "TX HW queue 1 timed out,"
+			" invoke forced kick\n");
+
+		rt2800_register_write(rt2x00dev, PBF_CFG, 0xf4000a);
+
+		for (i = 0; i < 10; i++) {
+			udelay(10);
+			if (!rt2x00_get_field32(reg, TXRXQ_PCNT_TX1Q))
+				break;
+		}
+
+		rt2800_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+	}
+
+	rt2x00usb_watchdog(rt2x00dev);
+}
+
+/*
  * TX descriptor initialization
  */
 static __le32 *rt2800usb_get_txwi(struct queue_entry *entry)
@@ -266,8 +341,14 @@ static void rt2800usb_write_tx_desc(struct queue_entry *entry,
 	 * Initialize TXINFO descriptor
 	 */
 	rt2x00_desc_read(txi, 0, &word);
+
+	/*
+	 * The size of TXINFO_W0_USB_DMA_TX_PKT_LEN is
+	 * TXWI + 802.11 header + L2 pad + payload + pad,
+	 * so need to decrease size of TXINFO and USB end pad.
+	 */
 	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
-			   entry->skb->len - TXINFO_DESC_SIZE);
+			   entry->skb->len - TXINFO_DESC_SIZE - 4);
 	rt2x00_set_field32(&word, TXINFO_W0_WIV,
 			   !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
 	rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
@@ -285,22 +366,37 @@ static void rt2800usb_write_tx_desc(struct queue_entry *entry,
 	skbdesc->desc_len = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
 }
 
-/*
- * TX data initialization
- */
-static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
+static void rt2800usb_write_tx_data(struct queue_entry *entry,
+					struct txentry_desc *txdesc)
 {
-	int length;
+	unsigned int len;
+	int err;
+
+	rt2800_write_tx_data(entry, txdesc);
 
 	/*
-	 * The length _must_ include 4 bytes padding,
-	 * it should always be multiple of 4,
-	 * but it must _not_ be a multiple of the USB packet size.
+	 * pad(1~3 bytes) is added after each 802.11 payload.
+	 * USB end pad(4 bytes) is added at each USB bulk out packet end.
+	 * TX frame format is :
+	 * | TXINFO | TXWI | 802.11 header | L2 pad | payload | pad | USB end pad |
+	 *                 |<------------- tx_pkt_len ------------->|
 	 */
-	length = roundup(entry->skb->len + 4, 4);
-	length += (4 * !(length % entry->queue->usb_maxpacket));
+	len = roundup(entry->skb->len, 4) + 4;
+	err = skb_padto(entry->skb, len);
+	if (unlikely(err)) {
+		WARNING(entry->queue->rt2x00dev, "TX SKB padding error, out of memory\n");
+		return;
+	}
 
-	return length;
+	entry->skb->len = len;
+}
+
+/*
+ * TX data initialization
+ */
+static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
+{
+	return entry->skb->len;
 }
 
 /*
@@ -335,14 +431,6 @@ static void rt2800usb_work_txdone(struct work_struct *work)
 	}
 }
 
-static void rt2800usb_kill_tx_queue(struct data_queue *queue)
-{
-	if (queue->qid == QID_BEACON)
-		rt2x00usb_register_write(queue->rt2x00dev, BCN_TIME_CFG, 0);
-
-	rt2x00usb_kill_tx_queue(queue);
-}
-
 /*
  * RX control handlers
  */
@@ -507,6 +595,8 @@ static const struct ieee80211_ops rt2800usb_mac80211_ops = {
 	.get_tsf		= rt2800_get_tsf,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
 	.ampdu_action		= rt2800_ampdu_action,
+	.flush			= rt2x00mac_flush,
+	.get_survey		= rt2800_get_survey,
 };
 
 static const struct rt2800_ops rt2800usb_rt2800_ops = {
@@ -535,13 +625,15 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.link_stats		= rt2800_link_stats,
 	.reset_tuner		= rt2800_reset_tuner,
 	.link_tuner		= rt2800_link_tuner,
-	.watchdog		= rt2x00usb_watchdog,
+	.watchdog		= rt2800usb_watchdog,
+	.start_queue		= rt2800usb_start_queue,
+	.kick_queue		= rt2x00usb_kick_queue,
+	.stop_queue		= rt2800usb_stop_queue,
+	.flush_queue		= rt2x00usb_flush_queue,
 	.write_tx_desc		= rt2800usb_write_tx_desc,
-	.write_tx_data		= rt2800_write_tx_data,
+	.write_tx_data		= rt2800usb_write_tx_data,
 	.write_beacon		= rt2800_write_beacon,
 	.get_tx_data_len	= rt2800usb_get_tx_data_len,
-	.kick_tx_queue		= rt2x00usb_kick_tx_queue,
-	.kill_tx_queue		= rt2800usb_kill_tx_queue,
 	.fill_rxdone		= rt2800usb_fill_rxdone,
 	.config_shared_key	= rt2800_config_shared_key,
 	.config_pairwise_key	= rt2800_config_pairwise_key,
@@ -553,21 +645,21 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 };
 
 static const struct data_queue_desc rt2800usb_queue_rx = {
-	.entry_num		= RX_ENTRIES,
+	.entry_num		= 128,
 	.data_size		= AGGREGATION_SIZE,
 	.desc_size		= RXINFO_DESC_SIZE + RXWI_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
 };
 
 static const struct data_queue_desc rt2800usb_queue_tx = {
-	.entry_num		= TX_ENTRIES,
+	.entry_num		= 64,
 	.data_size		= AGGREGATION_SIZE,
 	.desc_size		= TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
 };
 
 static const struct data_queue_desc rt2800usb_queue_bcn = {
-	.entry_num		= 8 * BEACON_ENTRIES,
+	.entry_num		= 8,
 	.data_size		= MGMT_FRAME_SIZE,
 	.desc_size		= TXINFO_DESC_SIZE + TXWI_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
@@ -599,11 +691,19 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	/* Abocom */
 	{ USB_DEVICE(0x07b8, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07b8, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1482, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* AirTies */
+	{ USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Allwin */
 	{ USB_DEVICE(0x8516, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x8516, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x8516, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x8516, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x8516, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x8516, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Amit */
 	{ USB_DEVICE(0x15c5, 0x0008), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Askey */
@@ -612,8 +712,13 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x0b05, 0x1731), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0b05, 0x1732), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0b05, 0x1742), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0b05, 0x1784), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* AzureWave */
 	{ USB_DEVICE(0x13d3, 0x3247), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3305), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3307), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x13d3, 0x3321), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Belkin */
 	{ USB_DEVICE(0x050d, 0x8053), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x050d, 0x805c), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -624,6 +729,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x14b2, 0x3c06), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c07), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c23), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c25), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x14b2, 0x3c27), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -632,17 +738,36 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x07aa, 0x002f), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07aa, 0x003c), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07aa, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* D-Link */
 	{ USB_DEVICE(0x07d1, 0x3c09), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0e), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c11), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x07d1, 0x3c16), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Draytek */
+	{ USB_DEVICE(0x07fa, 0x7712), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Edimax */
+	{ USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x7392, 0x7717), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x7392, 0x7718), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Encore */
+	{ USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x203d, 0x14a9), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* EnGenius */
 	{ USB_DEVICE(0x1740, 0x9701), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1740, 0x9702), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9707), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9708), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1740, 0x9709), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Gigabyte */
 	{ USB_DEVICE(0x1044, 0x800b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Hawking */
 	{ USB_DEVICE(0x0e66, 0x0001), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0e66, 0x0003), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -651,6 +776,10 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x0e66, 0x0013), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0e66, 0x0017), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0e66, 0x0018), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* I-O DATA */
+	{ USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x04bb, 0x0947), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x04bb, 0x0948), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Linksys */
 	{ USB_DEVICE(0x1737, 0x0070), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x1737, 0x0071), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -658,17 +787,44 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x0789, 0x0162), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0789, 0x0163), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0789, 0x0164), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0789, 0x0166), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Motorola */
 	{ USB_DEVICE(0x100d, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* MSI */
+	{ USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x3821), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x3822), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x3870), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x3871), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0db0, 0x6899), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x821a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x822a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x822b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x822c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x870a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x871a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x871b), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x871c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0db0, 0x899a), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Para */
+	{ USB_DEVICE(0x20b8, 0x8888), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Pegatron */
+	{ USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Philips */
 	{ USB_DEVICE(0x0471, 0x200f), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Planex */
+	{ USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x2019, 0xed06), USB_DEVICE_DATA(&rt2800usb_ops) },
+	/* Quanta */
+	{ USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Ralink */
+	{ USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2770), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2870), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Samsung */
 	{ USB_DEVICE(0x04e8, 0x2018), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Siemens */
@@ -681,13 +837,22 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	{ USB_DEVICE(0x0df6, 0x0039), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x003b), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x003d), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x003f), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0047), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0048), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* SMC */
 	{ USB_DEVICE(0x083a, 0x6618), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0x7512), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0x7522), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0x8522), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0xa618), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xa701), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xa702), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x083a, 0xa703), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x083a, 0xb522), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Sparklan */
 	{ USB_DEVICE(0x15a9, 0x0006), USB_DEVICE_DATA(&rt2800usb_ops) },
@@ -701,101 +866,16 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	/* Zinwell */
 	{ USB_DEVICE(0x5a57, 0x0280), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x5a57, 0x0282), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Zyxel */
 	{ USB_DEVICE(0x0586, 0x3416), USB_DEVICE_DATA(&rt2800usb_ops) },
-#ifdef CONFIG_RT2800USB_RT30XX
-	/* Abocom */
-	{ USB_DEVICE(0x07b8, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07b8, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07b8, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* AirTies */
-	{ USB_DEVICE(0x1eda, 0x2310), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Allwin */
-	{ USB_DEVICE(0x8516, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x8516, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x8516, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* ASUS */
-	{ USB_DEVICE(0x0b05, 0x1784), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* AzureWave */
-	{ USB_DEVICE(0x13d3, 0x3273), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x13d3, 0x3305), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x13d3, 0x3307), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x13d3, 0x3321), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Conceptronic */
-	{ USB_DEVICE(0x14b2, 0x3c12), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Corega */
-	{ USB_DEVICE(0x18c5, 0x0012), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* D-Link */
-	{ USB_DEVICE(0x07d1, 0x3c0a), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07d1, 0x3c0d), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07d1, 0x3c0e), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07d1, 0x3c0f), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x07d1, 0x3c16), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Draytek */
-	{ USB_DEVICE(0x07fa, 0x7712), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Edimax */
-	{ USB_DEVICE(0x7392, 0x7711), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Encore */
-	{ USB_DEVICE(0x203d, 0x1480), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x203d, 0x14a9), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* EnGenius */
-	{ USB_DEVICE(0x1740, 0x9703), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1740, 0x9705), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1740, 0x9706), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1740, 0x9707), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1740, 0x9708), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1740, 0x9709), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Gigabyte */
-	{ USB_DEVICE(0x1044, 0x800d), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* I-O DATA */
-	{ USB_DEVICE(0x04bb, 0x0945), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x04bb, 0x0947), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x04bb, 0x0948), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Logitec */
-	{ USB_DEVICE(0x0789, 0x0166), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* MSI */
-	{ USB_DEVICE(0x0db0, 0x3820), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x3821), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x3822), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x3870), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x3871), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x821a), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x822a), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x822b), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x822c), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x870a), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x871a), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x871b), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x871c), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0db0, 0x899a), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Para */
-	{ USB_DEVICE(0x20b8, 0x8888), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Pegatron */
-	{ USB_DEVICE(0x1d4d, 0x000c), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x1d4d, 0x000e), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Planex */
-	{ USB_DEVICE(0x2019, 0xab25), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Quanta */
-	{ USB_DEVICE(0x1a32, 0x0304), USB_DEVICE_DATA(&rt2800usb_ops) },
+#ifdef CONFIG_RT2800USB_RT33XX
 	/* Ralink */
-	{ USB_DEVICE(0x148f, 0x2070), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x148f, 0x3070), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x148f, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x148f, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x3370), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x148f, 0x8070), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Sitecom */
-	{ USB_DEVICE(0x0df6, 0x003e), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x0040), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x0042), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x0047), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x0048), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* SMC */
-	{ USB_DEVICE(0x083a, 0x7511), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x083a, 0xa701), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x083a, 0xa702), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x083a, 0xa703), USB_DEVICE_DATA(&rt2800usb_ops) },
-	/* Zinwell */
-	{ USB_DEVICE(0x5a57, 0x0283), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x5a57, 0x5257), USB_DEVICE_DATA(&rt2800usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0050), USB_DEVICE_DATA(&rt2800usb_ops) },
 #endif
 #ifdef CONFIG_RT2800USB_RT35XX
 	/* Allwin */
@@ -809,12 +889,9 @@ static struct usb_device_id rt2800usb_device_table[] = {
 	/* I-O DATA */
 	{ USB_DEVICE(0x04bb, 0x0944), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Ralink */
-	{ USB_DEVICE(0x148f, 0x3370), USB_DEVICE_DATA(&rt2800usb_ops) },
 	{ USB_DEVICE(0x148f, 0x3572), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x148f, 0x8070), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Sitecom */
 	{ USB_DEVICE(0x0df6, 0x0041), USB_DEVICE_DATA(&rt2800usb_ops) },
-	{ USB_DEVICE(0x0df6, 0x0050), USB_DEVICE_DATA(&rt2800usb_ops) },
 	/* Zinwell */
 	{ USB_DEVICE(0x5a57, 0x0284), USB_DEVICE_DATA(&rt2800usb_ops) },
 #endif
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
index 0722badccf8..671ea359261 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.h
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -40,8 +40,8 @@
 /*
  * DMA descriptor defines.
  */
-#define TXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
-#define RXINFO_DESC_SIZE		( 1 * sizeof(__le32) )
+#define TXINFO_DESC_SIZE		(1 * sizeof(__le32))
+#define RXINFO_DESC_SIZE		(1 * sizeof(__le32))
 
 /*
  * TX Info structure
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 94fe589acfa..84aaf393da4 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -66,7 +66,7 @@
 
 #ifdef CONFIG_RT2X00_DEBUG
 #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...)	\
-	DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, ##__args);
+	DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, ##__args)
 #else
 #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...)	\
 	do { } while (0)
@@ -347,6 +347,10 @@ struct link {
 	struct delayed_work watchdog_work;
 };
 
+enum rt2x00_delayed_flags {
+	DELAYED_UPDATE_BEACON,
+};
+
 /*
  * Interface structure
  * Per interface configuration details, this structure
@@ -354,22 +358,6 @@ struct link {
  */
 struct rt2x00_intf {
 	/*
-	 * All fields within the rt2x00_intf structure
-	 * must be protected with a spinlock.
-	 */
-	spinlock_t lock;
-
-	/*
-	 * MAC of the device.
-	 */
-	u8 mac[ETH_ALEN];
-
-	/*
-	 * BBSID of the AP to associate with.
-	 */
-	u8 bssid[ETH_ALEN];
-
-	/*
 	 * beacon->skb must be protected with the mutex.
 	 */
 	struct mutex beacon_skb_mutex;
@@ -384,8 +372,7 @@ struct rt2x00_intf {
 	/*
 	 * Actions that needed rescheduling.
 	 */
-	unsigned int delayed_flags;
-#define DELAYED_UPDATE_BEACON		0x00000001
+	unsigned long delayed_flags;
 
 	/*
 	 * Software sequence counter, this is only required
@@ -567,7 +554,15 @@ struct rt2x00lib_ops {
 			     struct link_qual *qual);
 	void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
 			    struct link_qual *qual, const u32 count);
+
+	/*
+	 * Data queue handlers.
+	 */
 	void (*watchdog) (struct rt2x00_dev *rt2x00dev);
+	void (*start_queue) (struct data_queue *queue);
+	void (*kick_queue) (struct data_queue *queue);
+	void (*stop_queue) (struct data_queue *queue);
+	void (*flush_queue) (struct data_queue *queue);
 
 	/*
 	 * TX control handlers
@@ -579,8 +574,6 @@ struct rt2x00lib_ops {
 	void (*write_beacon) (struct queue_entry *entry,
 			      struct txentry_desc *txdesc);
 	int (*get_tx_data_len) (struct queue_entry *entry);
-	void (*kick_tx_queue) (struct data_queue *queue);
-	void (*kill_tx_queue) (struct data_queue *queue);
 
 	/*
 	 * RX control handlers
@@ -664,6 +657,7 @@ enum rt2x00_flags {
 	DRIVER_REQUIRE_COPY_IV,
 	DRIVER_REQUIRE_L2PAD,
 	DRIVER_REQUIRE_TXSTATUS_FIFO,
+	DRIVER_REQUIRE_TASKLET_CONTEXT,
 
 	/*
 	 * Driver features
@@ -901,7 +895,7 @@ struct rt2x00_dev {
 	/*
 	 * FIFO for storing tx status reports between isr and tasklet.
 	 */
-	struct kfifo txstatus_fifo;
+	DECLARE_KFIFO_PTR(txstatus_fifo, u32);
 
 	/*
 	 * Tasklet for processing tx status reports (rt2800pci).
@@ -915,7 +909,7 @@ struct rt2x00_dev {
  * in those cases REGISTER_BUSY_COUNT attempts should be
  * taken with a REGISTER_BUSY_DELAY interval.
  */
-#define REGISTER_BUSY_COUNT	5
+#define REGISTER_BUSY_COUNT	100
 #define REGISTER_BUSY_DELAY	100
 
 /*
@@ -1067,6 +1061,78 @@ struct data_queue *rt2x00queue_get_queue(struct rt2x00_dev *rt2x00dev,
 struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
 					  enum queue_index index);
 
+/**
+ * rt2x00queue_pause_queue - Pause a data queue
+ * @queue: Pointer to &struct data_queue.
+ *
+ * This function will pause the data queue locally, preventing
+ * new frames to be added to the queue (while the hardware is
+ * still allowed to run).
+ */
+void rt2x00queue_pause_queue(struct data_queue *queue);
+
+/**
+ * rt2x00queue_unpause_queue - unpause a data queue
+ * @queue: Pointer to &struct data_queue.
+ *
+ * This function will unpause the data queue locally, allowing
+ * new frames to be added to the queue again.
+ */
+void rt2x00queue_unpause_queue(struct data_queue *queue);
+
+/**
+ * rt2x00queue_start_queue - Start a data queue
+ * @queue: Pointer to &struct data_queue.
+ *
+ * This function will start handling all pending frames in the queue.
+ */
+void rt2x00queue_start_queue(struct data_queue *queue);
+
+/**
+ * rt2x00queue_stop_queue - Halt a data queue
+ * @queue: Pointer to &struct data_queue.
+ *
+ * This function will stop all pending frames in the queue.
+ */
+void rt2x00queue_stop_queue(struct data_queue *queue);
+
+/**
+ * rt2x00queue_flush_queue - Flush a data queue
+ * @queue: Pointer to &struct data_queue.
+ * @drop: True to drop all pending frames.
+ *
+ * This function will flush the queue. After this call
+ * the queue is guarenteed to be empty.
+ */
+void rt2x00queue_flush_queue(struct data_queue *queue, bool drop);
+
+/**
+ * rt2x00queue_start_queues - Start all data queues
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ *
+ * This function will loop through all available queues to start them
+ */
+void rt2x00queue_start_queues(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00queue_stop_queues - Halt all data queues
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ *
+ * This function will loop through all available queues to stop
+ * any pending frames.
+ */
+void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev);
+
+/**
+ * rt2x00queue_flush_queues - Flush all data queues
+ * @rt2x00dev: Pointer to &struct rt2x00_dev.
+ * @drop: True to drop all pending frames.
+ *
+ * This function will loop through all available queues to flush
+ * any pending frames.
+ */
+void rt2x00queue_flush_queues(struct rt2x00_dev *rt2x00dev, bool drop);
+
 /*
  * Debugfs handlers.
  */
@@ -1092,6 +1158,7 @@ static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
  */
 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
 void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev);
+void rt2x00lib_dmastart(struct queue_entry *entry);
 void rt2x00lib_dmadone(struct queue_entry *entry);
 void rt2x00lib_txdone(struct queue_entry *entry,
 		      struct txdone_entry_desc *txdesc);
@@ -1133,6 +1200,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 int rt2x00mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
 		      const struct ieee80211_tx_queue_params *params);
 void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw);
+void rt2x00mac_flush(struct ieee80211_hw *hw, bool drop);
 
 /*
  * Driver allocation handlers.
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index 54ffb5aeb34..e7f67d5eda5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -62,13 +62,13 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
 	 * This will prevent the device being confused when it wants
 	 * to ACK frames or consideres itself associated.
 	 */
-	memset(&conf.mac, 0, sizeof(conf.mac));
+	memset(conf.mac, 0, sizeof(conf.mac));
 	if (mac)
-		memcpy(&conf.mac, mac, ETH_ALEN);
+		memcpy(conf.mac, mac, ETH_ALEN);
 
-	memset(&conf.bssid, 0, sizeof(conf.bssid));
+	memset(conf.bssid, 0, sizeof(conf.bssid));
 	if (bssid)
-		memcpy(&conf.bssid, bssid, ETH_ALEN);
+		memcpy(conf.bssid, bssid, ETH_ALEN);
 
 	flags |= CONFIG_UPDATE_TYPE;
 	if (mac || (!rt2x00dev->intf_ap_count && !rt2x00dev->intf_sta_count))
@@ -133,7 +133,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
 	 */
 	if (!(ant->flags & ANTENNA_RX_DIVERSITY))
 		config.rx = rt2x00lib_config_antenna_check(config.rx, def->rx);
-	else if(config.rx == ANTENNA_SW_DIVERSITY)
+	else if (config.rx == ANTENNA_SW_DIVERSITY)
 		config.rx = active->rx;
 
 	if (!(ant->flags & ANTENNA_TX_DIVERSITY))
@@ -146,7 +146,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
 	 * else the changes will be ignored by the device.
 	 */
 	if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
+		rt2x00queue_stop_queue(rt2x00dev->rx);
 
 	/*
 	 * Write new antenna setup to device and reset the link tuner.
@@ -160,7 +160,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev,
 	memcpy(active, &config, sizeof(config));
 
 	if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
+		rt2x00queue_start_queue(rt2x00dev->rx);
 }
 
 void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00debug.c b/drivers/net/wireless/rt2x00/rt2x00debug.c
index fcdb6b0dc40..c92db326474 100644
--- a/drivers/net/wireless/rt2x00/rt2x00debug.c
+++ b/drivers/net/wireless/rt2x00/rt2x00debug.c
@@ -162,11 +162,11 @@ void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
 	struct timeval timestamp;
 	u32 data_len;
 
-	do_gettimeofday(&timestamp);
-
-	if (!test_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags))
+	if (likely(!test_bit(FRAME_DUMP_FILE_OPEN, &intf->frame_dump_flags)))
 		return;
 
+	do_gettimeofday(&timestamp);
+
 	if (skb_queue_len(&intf->frame_dump_skbqueue) > 20) {
 		DEBUG(rt2x00dev, "txrx dump queue length exceeded.\n");
 		return;
@@ -339,18 +339,19 @@ static ssize_t rt2x00debug_read_queue_stats(struct file *file,
 		return -ENOMEM;
 
 	temp = data +
-	    sprintf(data, "qid\tcount\tlimit\tlength\tindex\tdma done\tdone\n");
+	    sprintf(data, "qid\tflags\t\tcount\tlimit\tlength\tindex\tdma done\tdone\n");
 
 	queue_for_each(intf->rt2x00dev, queue) {
-		spin_lock_irqsave(&queue->lock, irqflags);
+		spin_lock_irqsave(&queue->index_lock, irqflags);
 
-		temp += sprintf(temp, "%d\t%d\t%d\t%d\t%d\t%d\t%d\n", queue->qid,
+		temp += sprintf(temp, "%d\t0x%.8x\t%d\t%d\t%d\t%d\t%d\t\t%d\n",
+				queue->qid, (unsigned int)queue->flags,
 				queue->count, queue->limit, queue->length,
 				queue->index[Q_INDEX],
 				queue->index[Q_INDEX_DMA_DONE],
 				queue->index[Q_INDEX_DONE]);
 
-		spin_unlock_irqrestore(&queue->lock, irqflags);
+		spin_unlock_irqrestore(&queue->index_lock, irqflags);
 	}
 
 	size = strlen(data);
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 5ba79b935f0..9597a03242c 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -66,20 +66,16 @@ int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
 	set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
 
 	/*
-	 * Enable RX.
+	 * Enable queues.
 	 */
-	rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
+	rt2x00queue_start_queues(rt2x00dev);
+	rt2x00link_start_tuner(rt2x00dev);
 
 	/*
 	 * Start watchdog monitoring.
 	 */
 	rt2x00link_start_watchdog(rt2x00dev);
 
-	/*
-	 * Start the TX queues.
-	 */
-	ieee80211_wake_queues(rt2x00dev->hw);
-
 	return 0;
 }
 
@@ -89,20 +85,16 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
 		return;
 
 	/*
-	 * Stop the TX queues in mac80211.
-	 */
-	ieee80211_stop_queues(rt2x00dev->hw);
-	rt2x00queue_stop_queues(rt2x00dev);
-
-	/*
 	 * Stop watchdog monitoring.
 	 */
 	rt2x00link_stop_watchdog(rt2x00dev);
 
 	/*
-	 * Disable RX.
+	 * Stop all queues
 	 */
-	rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
+	rt2x00link_stop_tuner(rt2x00dev);
+	rt2x00queue_stop_queues(rt2x00dev);
+	rt2x00queue_flush_queues(rt2x00dev, true);
 
 	/*
 	 * Disable radio.
@@ -113,41 +105,11 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
 	rt2x00leds_led_radio(rt2x00dev, false);
 }
 
-void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state)
-{
-	/*
-	 * When we are disabling the RX, we should also stop the link tuner.
-	 */
-	if (state == STATE_RADIO_RX_OFF)
-		rt2x00link_stop_tuner(rt2x00dev);
-
-	rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
-
-	/*
-	 * When we are enabling the RX, we should also start the link tuner.
-	 */
-	if (state == STATE_RADIO_RX_ON)
-		rt2x00link_start_tuner(rt2x00dev);
-}
-
 static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
 					  struct ieee80211_vif *vif)
 {
 	struct rt2x00_dev *rt2x00dev = data;
 	struct rt2x00_intf *intf = vif_to_intf(vif);
-	int delayed_flags;
-
-	/*
-	 * Copy all data we need during this action under the protection
-	 * of a spinlock. Otherwise race conditions might occur which results
-	 * into an invalid configuration.
-	 */
-	spin_lock(&intf->lock);
-
-	delayed_flags = intf->delayed_flags;
-	intf->delayed_flags = 0;
-
-	spin_unlock(&intf->lock);
 
 	/*
 	 * It is possible the radio was disabled while the work had been
@@ -158,7 +120,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
 	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
 		return;
 
-	if (delayed_flags & DELAYED_UPDATE_BEACON)
+	if (test_and_clear_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags))
 		rt2x00queue_update_beacon(rt2x00dev, vif, true);
 }
 
@@ -251,8 +213,16 @@ void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev)
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_pretbtt);
 
+void rt2x00lib_dmastart(struct queue_entry *entry)
+{
+	set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
+	rt2x00queue_index_inc(entry->queue, Q_INDEX);
+}
+EXPORT_SYMBOL_GPL(rt2x00lib_dmastart);
+
 void rt2x00lib_dmadone(struct queue_entry *entry)
 {
+	set_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags);
 	clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
 	rt2x00queue_index_inc(entry->queue, Q_INDEX_DMA_DONE);
 }
@@ -264,11 +234,9 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
 	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-	enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
-	unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+	unsigned int header_length, i;
 	u8 rate_idx, rate_flags, retry_rates;
 	u8 skbdesc_flags = skbdesc->flags;
-	unsigned int i;
 	bool success;
 
 	/*
@@ -287,6 +255,11 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	skbdesc->flags &= ~SKBDESC_DESC_IN_SKB;
 
 	/*
+	 * Determine the length of 802.11 header.
+	 */
+	header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
+
+	/*
 	 * Remove L2 padding which was added during
 	 */
 	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
@@ -390,9 +363,12 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	 * through a mac80211 library call (RTS/CTS) then we should not
 	 * send the status report back.
 	 */
-	if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
-		ieee80211_tx_status(rt2x00dev->hw, entry->skb);
-	else
+	if (!(skbdesc_flags & SKBDESC_NOT_MAC80211)) {
+		if (test_bit(DRIVER_REQUIRE_TASKLET_CONTEXT, &rt2x00dev->flags))
+			ieee80211_tx_status(rt2x00dev->hw, entry->skb);
+		else
+			ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb);
+	} else
 		dev_kfree_skb_any(entry->skb);
 
 	/*
@@ -411,7 +387,7 @@ void rt2x00lib_txdone(struct queue_entry *entry,
 	 * is reenabled when the txdone handler has finished.
 	 */
 	if (!rt2x00queue_threshold(entry->queue))
-		ieee80211_wake_queue(rt2x00dev->hw, qid);
+		rt2x00queue_unpause_queue(entry->queue);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
 
@@ -483,6 +459,10 @@ void rt2x00lib_rxdone(struct queue_entry *entry)
 	unsigned int header_length;
 	int rate_idx;
 
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) ||
+	    !test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		goto submit_entry;
+
 	if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags))
 		goto submit_entry;
 
@@ -567,9 +547,11 @@ void rt2x00lib_rxdone(struct queue_entry *entry)
 	entry->skb = skb;
 
 submit_entry:
-	rt2x00dev->ops->lib->clear_entry(entry);
-	rt2x00queue_index_inc(entry->queue, Q_INDEX);
+	entry->flags = 0;
 	rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
+	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
+	    test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		rt2x00dev->ops->lib->clear_entry(entry);
 }
 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
 
@@ -678,7 +660,7 @@ static void rt2x00lib_rate(struct ieee80211_rate *entry,
 {
 	entry->flags = 0;
 	entry->bitrate = rate->bitrate;
-	entry->hw_value =index;
+	entry->hw_value = index;
 	entry->hw_value_short = index;
 
 	if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
@@ -818,8 +800,7 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Allocate tx status FIFO for driver use.
 	 */
-	if (test_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags) &&
-	    rt2x00dev->ops->lib->txstatus_tasklet) {
+	if (test_bit(DRIVER_REQUIRE_TXSTATUS_FIFO, &rt2x00dev->flags)) {
 		/*
 		 * Allocate txstatus fifo and tasklet, we use a size of 512
 		 * for the kfifo which is big enough to store 512/4=128 tx
@@ -833,9 +814,10 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 			return status;
 
 		/* tasklet for processing the tx status reports. */
-		tasklet_init(&rt2x00dev->txstatus_tasklet,
-			     rt2x00dev->ops->lib->txstatus_tasklet,
-			     (unsigned long)rt2x00dev);
+		if (rt2x00dev->ops->lib->txstatus_tasklet)
+			tasklet_init(&rt2x00dev->txstatus_tasklet,
+				     rt2x00dev->ops->lib->txstatus_tasklet,
+				     (unsigned long)rt2x00dev);
 
 	}
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00ht.c b/drivers/net/wireless/rt2x00/rt2x00ht.c
index c637bcaec5f..b7ad46ecaa1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00ht.c
+++ b/drivers/net/wireless/rt2x00/rt2x00ht.c
@@ -40,8 +40,6 @@ void rt2x00ht_create_tx_descriptor(struct queue_entry *entry,
 	if (tx_info->control.sta)
 		txdesc->mpdu_density =
 		    tx_info->control.sta->ht_cap.ampdu_density;
-	else
-		txdesc->mpdu_density = 0;
 
 	txdesc->ba_size = 7;	/* FIXME: What value is needed? */
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 619da23b7b5..a105c500627 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -57,7 +57,7 @@ static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
 }
 
 #define RATE_MCS(__mode, __mcs) \
-	( (((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff) )
+	((((__mode) & 0x00ff) << 8) | ((__mcs) & 0x00ff))
 
 static inline int rt2x00_get_rate_mcs(const u16 mcs_value)
 {
@@ -69,7 +69,6 @@ static inline int rt2x00_get_rate_mcs(const u16 mcs_value)
  */
 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev);
 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev);
-void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state);
 
 /*
  * Initialization handlers.
@@ -179,15 +178,6 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
 void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index);
 
 /**
- * rt2x00queue_stop_queues - Halt all data queues
- * @rt2x00dev: Pointer to &struct rt2x00_dev.
- *
- * This function will loop through all available queues to stop
- * any pending outgoing frames.
- */
-void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev);
-
-/**
  * rt2x00queue_init_queues - Initialize all data queues
  * @rt2x00dev: Pointer to &struct rt2x00_dev.
  *
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index b971d8798eb..bfda60eaf4e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -67,7 +67,7 @@
 	    (__avg).avg_weight  ? \
 		((((__avg).avg_weight * ((AVG_SAMPLES) - 1)) + \
 		  ((__val) * (AVG_FACTOR))) / \
-		 (AVG_SAMPLES) ) : \
+		 (AVG_SAMPLES)) : \
 		((__val) * (AVG_FACTOR)); \
 	__new.avg = __new.avg_weight / (AVG_FACTOR); \
 	__new; \
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c3c206a97d5..658542d2efe 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -104,7 +104,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	enum data_queue_qid qid = skb_get_queue_mapping(skb);
-	struct data_queue *queue;
+	struct data_queue *queue = NULL;
 
 	/*
 	 * Mac80211 might be calling this function while we are trying
@@ -153,7 +153,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		goto exit_fail;
 
 	if (rt2x00queue_threshold(queue))
-		ieee80211_stop_queue(rt2x00dev->hw, qid);
+		rt2x00queue_pause_queue(queue);
 
 	return NETDEV_TX_OK;
 
@@ -268,7 +268,6 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	else
 		rt2x00dev->intf_sta_count++;
 
-	spin_lock_init(&intf->lock);
 	spin_lock_init(&intf->seqlock);
 	mutex_init(&intf->beacon_skb_mutex);
 	intf->beacon = entry;
@@ -282,15 +281,8 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	 * STA interfaces at this time, since this can cause
 	 * invalid behavior in the device.
 	 */
-	memcpy(&intf->mac, vif->addr, ETH_ALEN);
-	if (vif->type == NL80211_IFTYPE_AP) {
-		memcpy(&intf->bssid, vif->addr, ETH_ALEN);
-		rt2x00lib_config_intf(rt2x00dev, intf, vif->type,
-				      intf->mac, intf->bssid);
-	} else {
-		rt2x00lib_config_intf(rt2x00dev, intf, vif->type,
-				      intf->mac, NULL);
-	}
+	rt2x00lib_config_intf(rt2x00dev, intf, vif->type,
+			      vif->addr, NULL);
 
 	/*
 	 * Some filters depend on the current working mode. We can force
@@ -358,7 +350,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
 	 * if for any reason the link tuner must be reset, this will be
 	 * handled by rt2x00lib_config().
 	 */
-	rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF_LINK);
+	rt2x00queue_stop_queue(rt2x00dev->rx);
 
 	/*
 	 * When we've just turned on the radio, we want to reprogram
@@ -376,7 +368,7 @@ int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed)
 	rt2x00lib_config_antenna(rt2x00dev, rt2x00dev->default_ant);
 
 	/* Turn RX back on */
-	rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON_LINK);
+	rt2x00queue_start_queue(rt2x00dev->rx);
 
 	return 0;
 }
@@ -451,9 +443,7 @@ static void rt2x00mac_set_tim_iter(void *data, u8 *mac,
 	    vif->type != NL80211_IFTYPE_WDS)
 		return;
 
-	spin_lock(&intf->lock);
-	intf->delayed_flags |= DELAYED_UPDATE_BEACON;
-	spin_unlock(&intf->lock);
+	set_bit(DELAYED_UPDATE_BEACON, &intf->delayed_flags);
 }
 
 int rt2x00mac_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
@@ -478,17 +468,17 @@ EXPORT_SYMBOL_GPL(rt2x00mac_set_tim);
 static void memcpy_tkip(struct rt2x00lib_crypto *crypto, u8 *key, u8 key_len)
 {
 	if (key_len > NL80211_TKIP_DATA_OFFSET_ENCR_KEY)
-		memcpy(&crypto->key,
+		memcpy(crypto->key,
 		       &key[NL80211_TKIP_DATA_OFFSET_ENCR_KEY],
 		       sizeof(crypto->key));
 
 	if (key_len > NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY)
-		memcpy(&crypto->tx_mic,
+		memcpy(crypto->tx_mic,
 		       &key[NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY],
 		       sizeof(crypto->tx_mic));
 
 	if (key_len > NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY)
-		memcpy(&crypto->rx_mic,
+		memcpy(crypto->rx_mic,
 		       &key[NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY],
 		       sizeof(crypto->rx_mic));
 }
@@ -498,7 +488,6 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		      struct ieee80211_key_conf *key)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct rt2x00_intf *intf = vif_to_intf(vif);
 	int (*set_key) (struct rt2x00_dev *rt2x00dev,
 			struct rt2x00lib_crypto *crypto,
 			struct ieee80211_key_conf *key);
@@ -522,7 +511,7 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	if (rt2x00dev->intf_sta_count)
 		crypto.bssidx = 0;
 	else
-		crypto.bssidx = intf->mac[5] & (rt2x00dev->ops->max_ap_intf - 1);
+		crypto.bssidx = vif->addr[5] & (rt2x00dev->ops->max_ap_intf - 1);
 
 	crypto.cipher = rt2x00crypto_key_to_cipher(key);
 	if (crypto.cipher == CIPHER_NONE)
@@ -540,7 +529,7 @@ int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	if (crypto.cipher == CIPHER_TKIP)
 		memcpy_tkip(&crypto, &key->key[0], key->keylen);
 	else
-		memcpy(&crypto.key, &key->key[0], key->keylen);
+		memcpy(crypto.key, &key->key[0], key->keylen);
 	/*
 	 * Each BSS has a maximum of 4 shared keys.
 	 * Shared key index values:
@@ -620,22 +609,8 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
 	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
 		return;
 
-	spin_lock(&intf->lock);
-
 	/*
-	 * conf->bssid can be NULL if coming from the internal
-	 * beacon update routine.
-	 */
-	if (changes & BSS_CHANGED_BSSID)
-		memcpy(&intf->bssid, bss_conf->bssid, ETH_ALEN);
-
-	spin_unlock(&intf->lock);
-
-	/*
-	 * Call rt2x00_config_intf() outside of the spinlock context since
-	 * the call will sleep for USB drivers. By using the ieee80211_if_conf
-	 * values as arguments we make keep access to rt2x00_intf thread safe
-	 * even without the lock.
+	 * Update the BSSID.
 	 */
 	if (changes & BSS_CHANGED_BSSID)
 		rt2x00lib_config_intf(rt2x00dev, intf, vif->type, NULL,
@@ -719,3 +694,13 @@ void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw)
 	wiphy_rfkill_set_hw_state(hw->wiphy, !active);
 }
 EXPORT_SYMBOL_GPL(rt2x00mac_rfkill_poll);
+
+void rt2x00mac_flush(struct ieee80211_hw *hw, bool drop)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct data_queue *queue;
+
+	tx_queue_for_each(rt2x00dev, queue)
+		rt2x00queue_flush_queue(queue, drop);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_flush);
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 2449d785cf8..73631c6fbb3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -82,6 +82,13 @@ void rt2x00pci_rxdone(struct rt2x00_dev *rt2x00dev)
 		skbdesc->desc_len = entry->queue->desc_size;
 
 		/*
+		 * DMA is already done, notify rt2x00lib that
+		 * it finished successfully.
+		 */
+		rt2x00lib_dmastart(entry);
+		rt2x00lib_dmadone(entry);
+
+		/*
 		 * Send the frame to rt2x00lib for further processing.
 		 */
 		rt2x00lib_rxdone(entry);
@@ -105,7 +112,7 @@ static int rt2x00pci_alloc_queue_dma(struct rt2x00_dev *rt2x00dev,
 	 */
 	addr = dma_alloc_coherent(rt2x00dev->dev,
 				  queue->limit * queue->desc_size,
-				  &dma, GFP_KERNEL | GFP_DMA);
+				  &dma, GFP_KERNEL);
 	if (!addr)
 		return -ENOMEM;
 
@@ -279,7 +286,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	rt2x00dev->irq = pci_dev->irq;
 	rt2x00dev->name = pci_name(pci_dev);
 
-	if (pci_dev->is_pcie)
+	if (pci_is_pcie(pci_dev))
 		rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE);
 	else
 		rt2x00_set_chip_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI);
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.h b/drivers/net/wireless/rt2x00/rt2x00pci.h
index b854d62ff99..746ce8fe8cf 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.h
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.h
@@ -64,7 +64,7 @@ static inline void rt2x00pci_register_multiwrite(struct rt2x00_dev *rt2x00dev,
 						 const void *value,
 						 const u32 length)
 {
-	memcpy_toio(rt2x00dev->csr.base + offset, value, length);
+	__iowrite32_copy(rt2x00dev->csr.base + offset, value, length >> 2);
 }
 
 /**
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index e360d287def..ca82b3a9169 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -199,7 +199,12 @@ void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
 
 void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
 {
-	unsigned int l2pad = L2PAD_SIZE(header_length);
+	/*
+	 * L2 padding is only present if the skb contains more than just the
+	 * IEEE 802.11 header.
+	 */
+	unsigned int l2pad = (skb->len > header_length) ?
+				L2PAD_SIZE(header_length) : 0;
 
 	if (!l2pad)
 		return;
@@ -311,14 +316,6 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 	memset(txdesc, 0, sizeof(*txdesc));
 
 	/*
-	 * Initialize information from queue
-	 */
-	txdesc->qid = entry->queue->qid;
-	txdesc->cw_min = entry->queue->cw_min;
-	txdesc->cw_max = entry->queue->cw_max;
-	txdesc->aifs = entry->queue->aifs;
-
-	/*
 	 * Header and frame information.
 	 */
 	txdesc->length = entry->skb->len;
@@ -460,12 +457,9 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
 	rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry->skb);
 }
 
-static void rt2x00queue_kick_tx_queue(struct queue_entry *entry,
+static void rt2x00queue_kick_tx_queue(struct data_queue *queue,
 				      struct txentry_desc *txdesc)
 {
-	struct data_queue *queue = entry->queue;
-	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-
 	/*
 	 * Check if we need to kick the queue, there are however a few rules
 	 *	1) Don't kick unless this is the last in frame in a burst.
@@ -477,7 +471,7 @@ static void rt2x00queue_kick_tx_queue(struct queue_entry *entry,
 	 */
 	if (rt2x00queue_threshold(queue) ||
 	    !test_bit(ENTRY_TXD_BURST, &txdesc->flags))
-		rt2x00dev->ops->lib->kick_tx_queue(queue);
+		queue->rt2x00dev->ops->lib->kick_queue(queue);
 }
 
 int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
@@ -567,7 +561,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
 
 	rt2x00queue_index_inc(queue, Q_INDEX);
 	rt2x00queue_write_tx_descriptor(entry, &txdesc);
-	rt2x00queue_kick_tx_queue(entry, &txdesc);
+	rt2x00queue_kick_tx_queue(queue, &txdesc);
 
 	return 0;
 }
@@ -591,7 +585,7 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
 	rt2x00queue_free_skb(intf->beacon);
 
 	if (!enable_beacon) {
-		rt2x00dev->ops->lib->kill_tx_queue(intf->beacon->queue);
+		rt2x00queue_stop_queue(intf->beacon->queue);
 		mutex_unlock(&intf->beacon_skb_mutex);
 		return 0;
 	}
@@ -649,10 +643,10 @@ void rt2x00queue_for_each_entry(struct data_queue *queue,
 	 * it should not be kicked during this run, since it
 	 * is part of another TX operation.
 	 */
-	spin_lock_irqsave(&queue->lock, irqflags);
+	spin_lock_irqsave(&queue->index_lock, irqflags);
 	index_start = queue->index[start];
 	index_end = queue->index[end];
-	spin_unlock_irqrestore(&queue->lock, irqflags);
+	spin_unlock_irqrestore(&queue->index_lock, irqflags);
 
 	/*
 	 * Start from the TX done pointer, this guarentees that we will
@@ -706,11 +700,11 @@ struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
 		return NULL;
 	}
 
-	spin_lock_irqsave(&queue->lock, irqflags);
+	spin_lock_irqsave(&queue->index_lock, irqflags);
 
 	entry = &queue->entries[queue->index[index]];
 
-	spin_unlock_irqrestore(&queue->lock, irqflags);
+	spin_unlock_irqrestore(&queue->index_lock, irqflags);
 
 	return entry;
 }
@@ -726,7 +720,7 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index)
 		return;
 	}
 
-	spin_lock_irqsave(&queue->lock, irqflags);
+	spin_lock_irqsave(&queue->index_lock, irqflags);
 
 	queue->index[index]++;
 	if (queue->index[index] >= queue->limit)
@@ -741,15 +735,219 @@ void rt2x00queue_index_inc(struct data_queue *queue, enum queue_index index)
 		queue->count++;
 	}
 
-	spin_unlock_irqrestore(&queue->lock, irqflags);
+	spin_unlock_irqrestore(&queue->index_lock, irqflags);
 }
 
+void rt2x00queue_pause_queue(struct data_queue *queue)
+{
+	if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
+	    !test_bit(QUEUE_STARTED, &queue->flags) ||
+	    test_and_set_bit(QUEUE_PAUSED, &queue->flags))
+		return;
+
+	switch (queue->qid) {
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		/*
+		 * For TX queues, we have to disable the queue
+		 * inside mac80211.
+		 */
+		ieee80211_stop_queue(queue->rt2x00dev->hw, queue->qid);
+		break;
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_pause_queue);
+
+void rt2x00queue_unpause_queue(struct data_queue *queue)
+{
+	if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
+	    !test_bit(QUEUE_STARTED, &queue->flags) ||
+	    !test_and_clear_bit(QUEUE_PAUSED, &queue->flags))
+		return;
+
+	switch (queue->qid) {
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		/*
+		 * For TX queues, we have to enable the queue
+		 * inside mac80211.
+		 */
+		ieee80211_wake_queue(queue->rt2x00dev->hw, queue->qid);
+		break;
+	case QID_RX:
+		/*
+		 * For RX we need to kick the queue now in order to
+		 * receive frames.
+		 */
+		queue->rt2x00dev->ops->lib->kick_queue(queue);
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_unpause_queue);
+
+void rt2x00queue_start_queue(struct data_queue *queue)
+{
+	mutex_lock(&queue->status_lock);
+
+	if (!test_bit(DEVICE_STATE_PRESENT, &queue->rt2x00dev->flags) ||
+	    test_and_set_bit(QUEUE_STARTED, &queue->flags)) {
+		mutex_unlock(&queue->status_lock);
+		return;
+	}
+
+	set_bit(QUEUE_PAUSED, &queue->flags);
+
+	queue->rt2x00dev->ops->lib->start_queue(queue);
+
+	rt2x00queue_unpause_queue(queue);
+
+	mutex_unlock(&queue->status_lock);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_start_queue);
+
+void rt2x00queue_stop_queue(struct data_queue *queue)
+{
+	mutex_lock(&queue->status_lock);
+
+	if (!test_and_clear_bit(QUEUE_STARTED, &queue->flags)) {
+		mutex_unlock(&queue->status_lock);
+		return;
+	}
+
+	rt2x00queue_pause_queue(queue);
+
+	queue->rt2x00dev->ops->lib->stop_queue(queue);
+
+	mutex_unlock(&queue->status_lock);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_stop_queue);
+
+void rt2x00queue_flush_queue(struct data_queue *queue, bool drop)
+{
+	unsigned int i;
+	bool started;
+	bool tx_queue =
+		(queue->qid == QID_AC_VO) ||
+		(queue->qid == QID_AC_VI) ||
+		(queue->qid == QID_AC_BE) ||
+		(queue->qid == QID_AC_BK);
+
+	mutex_lock(&queue->status_lock);
+
+	/*
+	 * If the queue has been started, we must stop it temporarily
+	 * to prevent any new frames to be queued on the device. If
+	 * we are not dropping the pending frames, the queue must
+	 * only be stopped in the software and not the hardware,
+	 * otherwise the queue will never become empty on its own.
+	 */
+	started = test_bit(QUEUE_STARTED, &queue->flags);
+	if (started) {
+		/*
+		 * Pause the queue
+		 */
+		rt2x00queue_pause_queue(queue);
+
+		/*
+		 * If we are not supposed to drop any pending
+		 * frames, this means we must force a start (=kick)
+		 * to the queue to make sure the hardware will
+		 * start transmitting.
+		 */
+		if (!drop && tx_queue)
+			queue->rt2x00dev->ops->lib->kick_queue(queue);
+	}
+
+	/*
+	 * Check if driver supports flushing, we can only guarentee
+	 * full support for flushing if the driver is able
+	 * to cancel all pending frames (drop = true).
+	 */
+	if (drop && queue->rt2x00dev->ops->lib->flush_queue)
+		queue->rt2x00dev->ops->lib->flush_queue(queue);
+
+	/*
+	 * When we don't want to drop any frames, or when
+	 * the driver doesn't fully flush the queue correcly,
+	 * we must wait for the queue to become empty.
+	 */
+	for (i = 0; !rt2x00queue_empty(queue) && i < 100; i++)
+		msleep(10);
+
+	/*
+	 * The queue flush has failed...
+	 */
+	if (unlikely(!rt2x00queue_empty(queue)))
+		WARNING(queue->rt2x00dev, "Queue %d failed to flush", queue->qid);
+
+	/*
+	 * Restore the queue to the previous status
+	 */
+	if (started)
+		rt2x00queue_unpause_queue(queue);
+
+	mutex_unlock(&queue->status_lock);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_flush_queue);
+
+void rt2x00queue_start_queues(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+
+	/*
+	 * rt2x00queue_start_queue will call ieee80211_wake_queue
+	 * for each queue after is has been properly initialized.
+	 */
+	tx_queue_for_each(rt2x00dev, queue)
+		rt2x00queue_start_queue(queue);
+
+	rt2x00queue_start_queue(rt2x00dev->rx);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_start_queues);
+
+void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+
+	/*
+	 * rt2x00queue_stop_queue will call ieee80211_stop_queue
+	 * as well, but we are completely shutting doing everything
+	 * now, so it is much safer to stop all TX queues at once,
+	 * and use rt2x00queue_stop_queue for cleaning up.
+	 */
+	ieee80211_stop_queues(rt2x00dev->hw);
+
+	tx_queue_for_each(rt2x00dev, queue)
+		rt2x00queue_stop_queue(queue);
+
+	rt2x00queue_stop_queue(rt2x00dev->rx);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_stop_queues);
+
+void rt2x00queue_flush_queues(struct rt2x00_dev *rt2x00dev, bool drop)
+{
+	struct data_queue *queue;
+
+	tx_queue_for_each(rt2x00dev, queue)
+		rt2x00queue_flush_queue(queue, drop);
+
+	rt2x00queue_flush_queue(rt2x00dev->rx, drop);
+}
+EXPORT_SYMBOL_GPL(rt2x00queue_flush_queues);
+
 static void rt2x00queue_reset(struct data_queue *queue)
 {
 	unsigned long irqflags;
 	unsigned int i;
 
-	spin_lock_irqsave(&queue->lock, irqflags);
+	spin_lock_irqsave(&queue->index_lock, irqflags);
 
 	queue->count = 0;
 	queue->length = 0;
@@ -759,15 +957,7 @@ static void rt2x00queue_reset(struct data_queue *queue)
 		queue->last_action[i] = jiffies;
 	}
 
-	spin_unlock_irqrestore(&queue->lock, irqflags);
-}
-
-void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev)
-{
-	struct data_queue *queue;
-
-	txall_queue_for_each(rt2x00dev, queue)
-		rt2x00dev->ops->lib->kill_tx_queue(queue);
+	spin_unlock_irqrestore(&queue->index_lock, irqflags);
 }
 
 void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
@@ -778,11 +968,8 @@ void rt2x00queue_init_queues(struct rt2x00_dev *rt2x00dev)
 	queue_for_each(rt2x00dev, queue) {
 		rt2x00queue_reset(queue);
 
-		for (i = 0; i < queue->limit; i++) {
+		for (i = 0; i < queue->limit; i++)
 			rt2x00dev->ops->lib->clear_entry(&queue->entries[i]);
-			if (queue->qid == QID_RX)
-				rt2x00queue_index_inc(queue, Q_INDEX);
-		}
 	}
 }
 
@@ -809,8 +996,8 @@ static int rt2x00queue_alloc_entries(struct data_queue *queue,
 		return -ENOMEM;
 
 #define QUEUE_ENTRY_PRIV_OFFSET(__base, __index, __limit, __esize, __psize) \
-	( ((char *)(__base)) + ((__limit) * (__esize)) + \
-	    ((__index) * (__psize)) )
+	(((char *)(__base)) + ((__limit) * (__esize)) + \
+	    ((__index) * (__psize)))
 
 	for (i = 0; i < queue->limit; i++) {
 		entries[i].flags = 0;
@@ -911,7 +1098,8 @@ void rt2x00queue_uninitialize(struct rt2x00_dev *rt2x00dev)
 static void rt2x00queue_init(struct rt2x00_dev *rt2x00dev,
 			     struct data_queue *queue, enum data_queue_qid qid)
 {
-	spin_lock_init(&queue->lock);
+	mutex_init(&queue->status_lock);
+	spin_lock_init(&queue->index_lock);
 
 	queue->rt2x00dev = rt2x00dev;
 	queue->qid = qid;
@@ -953,7 +1141,7 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize queue parameters.
 	 * RX: qid = QID_RX
-	 * TX: qid = QID_AC_BE + index
+	 * TX: qid = QID_AC_VO + index
 	 * TX: cw_min: 2^5 = 32.
 	 * TX: cw_max: 2^10 = 1024.
 	 * BCN: qid = QID_BEACON
@@ -961,7 +1149,7 @@ int rt2x00queue_allocate(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00queue_init(rt2x00dev, rt2x00dev->rx, QID_RX);
 
-	qid = QID_AC_BE;
+	qid = QID_AC_VO;
 	tx_queue_for_each(rt2x00dev, queue)
 		rt2x00queue_init(rt2x00dev, queue, qid++);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index d81d85f3486..fab8e2687f2 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -43,28 +43,12 @@
 #define AGGREGATION_SIZE	3840
 
 /**
- * DOC: Number of entries per queue
- *
- * Under normal load without fragmentation, 12 entries are sufficient
- * without the queue being filled up to the maximum. When using fragmentation
- * and the queue threshold code, we need to add some additional margins to
- * make sure the queue will never (or only under extreme load) fill up
- * completely.
- * Since we don't use preallocated DMA, having a large number of queue entries
- * will have minimal impact on the memory requirements for the queue.
- */
-#define RX_ENTRIES	24
-#define TX_ENTRIES	24
-#define BEACON_ENTRIES	1
-#define ATIM_ENTRIES	8
-
-/**
  * enum data_queue_qid: Queue identification
  *
+ * @QID_AC_VO: AC VO queue
+ * @QID_AC_VI: AC VI queue
  * @QID_AC_BE: AC BE queue
  * @QID_AC_BK: AC BK queue
- * @QID_AC_VI: AC VI queue
- * @QID_AC_VO: AC VO queue
  * @QID_HCCA: HCCA queue
  * @QID_MGMT: MGMT queue (prio queue)
  * @QID_RX: RX queue
@@ -73,10 +57,10 @@
  * @QID_ATIM: Atim queue (value unspeficied, don't send it to device)
  */
 enum data_queue_qid {
-	QID_AC_BE = 0,
-	QID_AC_BK = 1,
-	QID_AC_VI = 2,
-	QID_AC_VO = 3,
+	QID_AC_VO = 0,
+	QID_AC_VI = 1,
+	QID_AC_BE = 2,
+	QID_AC_BK = 3,
 	QID_HCCA = 4,
 	QID_MGMT = 13,
 	QID_RX = 14,
@@ -296,7 +280,6 @@ enum txentry_desc_flags {
  * Summary of information for the frame descriptor before sending a TX frame.
  *
  * @flags: Descriptor flags (See &enum queue_entry_flags).
- * @qid: Queue identification (See &enum data_queue_qid).
  * @length: Length of the entire frame.
  * @header_length: Length of 802.11 header.
  * @length_high: PLCP length high word.
@@ -309,11 +292,8 @@ enum txentry_desc_flags {
  * @rate_mode: Rate mode (See @enum rate_modulation).
  * @mpdu_density: MDPU density.
  * @retry_limit: Max number of retries.
- * @aifs: AIFS value.
  * @ifs: IFS value.
  * @txop: IFS value for 11n capable chips.
- * @cw_min: cwmin value.
- * @cw_max: cwmax value.
  * @cipher: Cipher type used for encryption.
  * @key_idx: Key index used for encryption.
  * @iv_offset: Position where IV should be inserted by hardware.
@@ -322,8 +302,6 @@ enum txentry_desc_flags {
 struct txentry_desc {
 	unsigned long flags;
 
-	enum data_queue_qid qid;
-
 	u16 length;
 	u16 header_length;
 
@@ -339,11 +317,8 @@ struct txentry_desc {
 	u16 mpdu_density;
 
 	short retry_limit;
-	short aifs;
 	short ifs;
 	short txop;
-	short cw_min;
-	short cw_max;
 
 	enum cipher cipher;
 	u16 key_idx;
@@ -365,12 +340,16 @@ struct txentry_desc {
  * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occured
  *	while transfering the data to the hardware. No TX status report will
  *	be expected from the hardware.
+ * @ENTRY_DATA_STATUS_PENDING: The entry has been send to the device and
+ *	returned. It is now waiting for the status reporting before the
+ *	entry can be reused again.
  */
 enum queue_entry_flags {
 	ENTRY_BCN_ASSIGNED,
 	ENTRY_OWNER_DEVICE_DATA,
 	ENTRY_DATA_PENDING,
-	ENTRY_DATA_IO_FAILED
+	ENTRY_DATA_IO_FAILED,
+	ENTRY_DATA_STATUS_PENDING,
 };
 
 /**
@@ -417,13 +396,33 @@ enum queue_index {
 };
 
 /**
+ * enum data_queue_flags: Status flags for data queues
+ *
+ * @QUEUE_STARTED: The queue has been started. Fox RX queues this means the
+ *	device might be DMA'ing skbuffers. TX queues will accept skbuffers to
+ *	be transmitted and beacon queues will start beaconing the configured
+ *	beacons.
+ * @QUEUE_PAUSED: The queue has been started but is currently paused.
+ *	When this bit is set, the queue has been stopped in mac80211,
+ *	preventing new frames to be enqueued. However, a few frames
+ *	might still appear shortly after the pausing...
+ */
+enum data_queue_flags {
+	QUEUE_STARTED,
+	QUEUE_PAUSED,
+};
+
+/**
  * struct data_queue: Data queue
  *
  * @rt2x00dev: Pointer to main &struct rt2x00dev where this queue belongs to.
  * @entries: Base address of the &struct queue_entry which are
  *	part of this queue.
  * @qid: The queue identification, see &enum data_queue_qid.
- * @lock: Spinlock to protect index handling. Whenever @index, @index_done or
+ * @flags: Entry flags, see &enum queue_entry_flags.
+ * @status_lock: The mutex for protecting the start/stop/flush
+ *	handling on this queue.
+ * @index_lock: Spinlock to protect index handling. Whenever @index, @index_done or
  *	@index_crypt needs to be changed this lock should be grabbed to prevent
  *	index corruption due to concurrency.
  * @count: Number of frames handled in the queue.
@@ -446,8 +445,11 @@ struct data_queue {
 	struct queue_entry *entries;
 
 	enum data_queue_qid qid;
+	unsigned long flags;
+
+	struct mutex status_lock;
+	spinlock_t index_lock;
 
-	spinlock_t lock;
 	unsigned int count;
 	unsigned short limit;
 	unsigned short threshold;
@@ -618,10 +620,10 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
 }
 
 /**
- * rt2x00queue_timeout - Check if a timeout occured for STATUS reorts
+ * rt2x00queue_status_timeout - Check if a timeout occured for STATUS reports
  * @queue: Queue to check.
  */
-static inline int rt2x00queue_timeout(struct data_queue *queue)
+static inline int rt2x00queue_status_timeout(struct data_queue *queue)
 {
 	return time_after(queue->last_action[Q_INDEX_DMA_DONE],
 			  queue->last_action[Q_INDEX_DONE] + (HZ / 10));
diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index cef94621cef..e8259ae48ce 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -83,10 +83,6 @@ enum dev_state {
  */
 	STATE_RADIO_ON,
 	STATE_RADIO_OFF,
-	STATE_RADIO_RX_ON,
-	STATE_RADIO_RX_OFF,
-	STATE_RADIO_RX_ON_LINK,
-	STATE_RADIO_RX_OFF_LINK,
 	STATE_RADIO_IRQ_ON,
 	STATE_RADIO_IRQ_OFF,
 	STATE_RADIO_IRQ_ON_ISR,
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c
index fc98063de71..2aa5c38022f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00soc.c
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
@@ -40,6 +40,8 @@ static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
 
 	kfree(rt2x00dev->eeprom);
 	rt2x00dev->eeprom = NULL;
+
+	iounmap(rt2x00dev->csr.base);
 }
 
 static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
@@ -51,9 +53,9 @@ static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
 	if (!res)
 		return -ENODEV;
 
-	rt2x00dev->csr.base = (void __iomem *)KSEG1ADDR(res->start);
+	rt2x00dev->csr.base = ioremap(res->start, resource_size(res));
 	if (!rt2x00dev->csr.base)
-		goto exit;
+		return -ENOMEM;
 
 	rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
 	if (!rt2x00dev->eeprom)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index b3317df7a7d..1a9937d5aff 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -195,7 +195,8 @@ static void rt2x00usb_work_txdone(struct work_struct *work)
 		while (!rt2x00queue_empty(queue)) {
 			entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
 
-			if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+			if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+			    !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
 				break;
 
 			rt2x00usb_work_txdone_entry(entry);
@@ -226,9 +227,7 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
 	 * Schedule the delayed work for reading the TX status
 	 * from the device.
 	 */
-	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
-	    test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-		ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->txdone_work);
+	ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->txdone_work);
 }
 
 static void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
@@ -237,8 +236,10 @@ static void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
 	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
 	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
 	u32 length;
+	int status;
 
-	if (!test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags))
+	if (!test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags) ||
+	    test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
 		return;
 
 	/*
@@ -253,121 +254,15 @@ static void rt2x00usb_kick_tx_entry(struct queue_entry *entry)
 			  entry->skb->data, length,
 			  rt2x00usb_interrupt_txdone, entry);
 
-	if (usb_submit_urb(entry_priv->urb, GFP_ATOMIC)) {
+	status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
+	if (status) {
+		if (status == -ENODEV)
+			clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
 		set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
 		rt2x00lib_dmadone(entry);
 	}
 }
 
-void rt2x00usb_kick_tx_queue(struct data_queue *queue)
-{
-	rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
-				   rt2x00usb_kick_tx_entry);
-}
-EXPORT_SYMBOL_GPL(rt2x00usb_kick_tx_queue);
-
-static void rt2x00usb_kill_tx_entry(struct queue_entry *entry)
-{
-	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
-	struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
-
-	if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
-		return;
-
-	usb_kill_urb(entry_priv->urb);
-
-	/*
-	 * Kill guardian urb (if required by driver).
-	 */
-	if ((entry->queue->qid == QID_BEACON) &&
-	    (test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)))
-		usb_kill_urb(bcn_priv->guardian_urb);
-}
-
-void rt2x00usb_kill_tx_queue(struct data_queue *queue)
-{
-	rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
-				   rt2x00usb_kill_tx_entry);
-}
-EXPORT_SYMBOL_GPL(rt2x00usb_kill_tx_queue);
-
-static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
-{
-	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	unsigned short threshold = queue->threshold;
-
-	WARNING(queue->rt2x00dev, "TX queue %d DMA timed out,"
-		" invoke forced forced reset", queue->qid);
-
-	/*
-	 * Temporarily disable the TX queue, this will force mac80211
-	 * to use the other queues until this queue has been restored.
-	 *
-	 * Set the queue threshold to the queue limit. This prevents the
-	 * queue from being enabled during the txdone handler.
-	 */
-	queue->threshold = queue->limit;
-	ieee80211_stop_queue(rt2x00dev->hw, queue->qid);
-
-	/*
-	 * Kill all entries in the queue, afterwards we need to
-	 * wait a bit for all URBs to be cancelled.
-	 */
-	rt2x00usb_kill_tx_queue(queue);
-
-	/*
-	 * In case that a driver has overriden the txdone_work
-	 * function, we invoke the TX done through there.
-	 */
-	rt2x00dev->txdone_work.func(&rt2x00dev->txdone_work);
-
-	/*
-	 * Security measure: if the driver did override the
-	 * txdone_work function, and the hardware did arrive
-	 * in a state which causes it to malfunction, it is
-	 * possible that the driver couldn't handle the txdone
-	 * event correctly. So after giving the driver the
-	 * chance to cleanup, we now force a cleanup of any
-	 * leftovers.
-	 */
-	if (!rt2x00queue_empty(queue)) {
-		WARNING(queue->rt2x00dev, "TX queue %d DMA timed out,"
-			" status handling failed, invoke hard reset", queue->qid);
-		rt2x00usb_work_txdone(&rt2x00dev->txdone_work);
-	}
-
-	/*
-	 * The queue has been reset, and mac80211 is allowed to use the
-	 * queue again.
-	 */
-	queue->threshold = threshold;
-	ieee80211_wake_queue(rt2x00dev->hw, queue->qid);
-}
-
-static void rt2x00usb_watchdog_tx_status(struct data_queue *queue)
-{
-	WARNING(queue->rt2x00dev, "TX queue %d status timed out,"
-		" invoke forced tx handler", queue->qid);
-
-	ieee80211_queue_work(queue->rt2x00dev->hw, &queue->rt2x00dev->txdone_work);
-}
-
-void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev)
-{
-	struct data_queue *queue;
-
-	tx_queue_for_each(rt2x00dev, queue) {
-		if (!rt2x00queue_empty(queue)) {
-			if (rt2x00queue_dma_timeout(queue))
-				rt2x00usb_watchdog_tx_dma(queue);
-			if (rt2x00queue_timeout(queue))
-				rt2x00usb_watchdog_tx_status(queue);
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(rt2x00usb_watchdog);
-
 /*
  * RX data handlers.
  */
@@ -382,7 +277,8 @@ static void rt2x00usb_work_rxdone(struct work_struct *work)
 	while (!rt2x00queue_empty(rt2x00dev->rx)) {
 		entry = rt2x00queue_get_entry(rt2x00dev->rx, Q_INDEX_DONE);
 
-		if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+		if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+		    !test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
 			break;
 
 		/*
@@ -424,11 +320,157 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
 	 * Schedule the delayed work for reading the RX status
 	 * from the device.
 	 */
-	if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags) &&
-	    test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
-		ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->rxdone_work);
+	ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->rxdone_work);
 }
 
+static void rt2x00usb_kick_rx_entry(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
+	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
+	int status;
+
+	if (test_and_set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) ||
+	    test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
+		return;
+
+	rt2x00lib_dmastart(entry);
+
+	usb_fill_bulk_urb(entry_priv->urb, usb_dev,
+			  usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint),
+			  entry->skb->data, entry->skb->len,
+			  rt2x00usb_interrupt_rxdone, entry);
+
+	status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
+	if (status) {
+		if (status == -ENODEV)
+			clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
+		set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
+		rt2x00lib_dmadone(entry);
+	}
+}
+
+void rt2x00usb_kick_queue(struct data_queue *queue)
+{
+	switch (queue->qid) {
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		if (!rt2x00queue_empty(queue))
+			rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
+						   rt2x00usb_kick_tx_entry);
+		break;
+	case QID_RX:
+		if (!rt2x00queue_full(queue))
+			rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
+						   rt2x00usb_kick_rx_entry);
+		break;
+	default:
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_kick_queue);
+
+static void rt2x00usb_flush_entry(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
+	struct queue_entry_priv_usb_bcn *bcn_priv = entry->priv_data;
+
+	if (!test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags))
+		return;
+
+	usb_kill_urb(entry_priv->urb);
+
+	/*
+	 * Kill guardian urb (if required by driver).
+	 */
+	if ((entry->queue->qid == QID_BEACON) &&
+	    (test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)))
+		usb_kill_urb(bcn_priv->guardian_urb);
+}
+
+void rt2x00usb_flush_queue(struct data_queue *queue)
+{
+	struct work_struct *completion;
+	unsigned int i;
+
+	rt2x00queue_for_each_entry(queue, Q_INDEX_DONE, Q_INDEX,
+				   rt2x00usb_flush_entry);
+
+	/*
+	 * Obtain the queue completion handler
+	 */
+	switch (queue->qid) {
+	case QID_AC_VO:
+	case QID_AC_VI:
+	case QID_AC_BE:
+	case QID_AC_BK:
+		completion = &queue->rt2x00dev->txdone_work;
+		break;
+	case QID_RX:
+		completion = &queue->rt2x00dev->rxdone_work;
+		break;
+	default:
+		return;
+	}
+
+	for (i = 0; i < 20; i++) {
+		/*
+		 * Check if the driver is already done, otherwise we
+		 * have to sleep a little while to give the driver/hw
+		 * the oppurtunity to complete interrupt process itself.
+		 */
+		if (rt2x00queue_empty(queue))
+			break;
+
+		/*
+		 * Schedule the completion handler manually, when this
+		 * worker function runs, it should cleanup the queue.
+		 */
+		ieee80211_queue_work(queue->rt2x00dev->hw, completion);
+
+		/*
+		 * Wait for a little while to give the driver
+		 * the oppurtunity to recover itself.
+		 */
+		msleep(10);
+	}
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_flush_queue);
+
+static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
+{
+	WARNING(queue->rt2x00dev, "TX queue %d DMA timed out,"
+		" invoke forced forced reset\n", queue->qid);
+
+	rt2x00queue_flush_queue(queue, true);
+}
+
+static void rt2x00usb_watchdog_tx_status(struct data_queue *queue)
+{
+	WARNING(queue->rt2x00dev, "TX queue %d status timed out,"
+		" invoke forced tx handler\n", queue->qid);
+
+	ieee80211_queue_work(queue->rt2x00dev->hw, &queue->rt2x00dev->txdone_work);
+}
+
+void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+
+	tx_queue_for_each(rt2x00dev, queue) {
+		if (!rt2x00queue_empty(queue)) {
+			if (rt2x00queue_dma_timeout(queue))
+				rt2x00usb_watchdog_tx_dma(queue);
+			if (rt2x00queue_status_timeout(queue))
+				rt2x00usb_watchdog_tx_status(queue);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(rt2x00usb_watchdog);
+
 /*
  * Radio handlers
  */
@@ -436,12 +478,6 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	rt2x00usb_vendor_request_sw(rt2x00dev, USB_RX_CONTROL, 0, 0,
 				    REGISTER_TIMEOUT);
-
-	/*
-	 * The USB version of kill_tx_queue also works
-	 * on the RX queue.
-	 */
-	rt2x00dev->ops->lib->kill_tx_queue(rt2x00dev->rx);
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
 
@@ -450,25 +486,10 @@ EXPORT_SYMBOL_GPL(rt2x00usb_disable_radio);
  */
 void rt2x00usb_clear_entry(struct queue_entry *entry)
 {
-	struct usb_device *usb_dev =
-	    to_usb_device_intf(entry->queue->rt2x00dev->dev);
-	struct queue_entry_priv_usb *entry_priv = entry->priv_data;
-	int pipe;
-
 	entry->flags = 0;
 
-	if (entry->queue->qid == QID_RX) {
-		pipe = usb_rcvbulkpipe(usb_dev, entry->queue->usb_endpoint);
-		usb_fill_bulk_urb(entry_priv->urb, usb_dev, pipe,
-				entry->skb->data, entry->skb->len,
-				rt2x00usb_interrupt_rxdone, entry);
-
-		set_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
-		if (usb_submit_urb(entry_priv->urb, GFP_ATOMIC)) {
-			set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
-			rt2x00lib_dmadone(entry);
-		}
-	}
+	if (entry->queue->qid == QID_RX)
+		rt2x00usb_kick_rx_entry(entry);
 }
 EXPORT_SYMBOL_GPL(rt2x00usb_clear_entry);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index c2d997f67b3..6aaf51fc7ad 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -378,22 +378,22 @@ struct queue_entry_priv_usb_bcn {
 };
 
 /**
- * rt2x00usb_kick_tx_queue - Kick data queue
+ * rt2x00usb_kick_queue - Kick data queue
  * @queue: Data queue to kick
  *
  * This will walk through all entries of the queue and push all pending
  * frames to the hardware as a single burst.
  */
-void rt2x00usb_kick_tx_queue(struct data_queue *queue);
+void rt2x00usb_kick_queue(struct data_queue *queue);
 
 /**
- * rt2x00usb_kill_tx_queue - Kill data queue
- * @queue: Data queue to kill
+ * rt2x00usb_flush_queue - Flush data queue
+ * @queue: Data queue to stop
  *
  * This will walk through all entries of the queue and kill all
- * previously kicked frames before they can be send.
+ * URB's which were send to the device.
  */
-void rt2x00usb_kill_tx_queue(struct data_queue *queue);
+void rt2x00usb_flush_queue(struct data_queue *queue);
 
 /**
  * rt2x00usb_watchdog - Watchdog for USB communication
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index af548c87f10..8de44dd401e 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -1140,6 +1140,106 @@ dynamic_cca_tune:
 }
 
 /*
+ * Queue handlers.
+ */
+static void rt61pci_start_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
+		rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
+		rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
+		break;
+	case QID_BEACON:
+		rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
+		rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
+		rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rt61pci_kick_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_AC_VO:
+		rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
+		rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC0, 1);
+		rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
+		break;
+	case QID_AC_VI:
+		rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
+		rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC1, 1);
+		rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
+		break;
+	case QID_AC_BE:
+		rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
+		rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC2, 1);
+		rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
+		break;
+	case QID_AC_BK:
+		rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
+		rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC3, 1);
+		rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rt61pci_stop_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_AC_VO:
+		rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
+		rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC0, 1);
+		rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
+		break;
+	case QID_AC_VI:
+		rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
+		rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, 1);
+		rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
+		break;
+	case QID_AC_BE:
+		rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
+		rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, 1);
+		rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
+		break;
+	case QID_AC_BK:
+		rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
+		rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, 1);
+		rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
+		break;
+	case QID_RX:
+		rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
+		rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 1);
+		rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
+		break;
+	case QID_BEACON:
+		rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
+		rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
+		rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
  * Firmware functions
  */
 static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
@@ -1616,18 +1716,6 @@ static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev)
 /*
  * Device state switch handlers.
  */
-static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
-			      enum dev_state state)
-{
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
-			   (state == STATE_RADIO_RX_OFF) ||
-			   (state == STATE_RADIO_RX_OFF_LINK));
-	rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
-}
-
 static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
 			       enum dev_state state)
 {
@@ -1744,12 +1832,6 @@ static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
 	case STATE_RADIO_OFF:
 		rt61pci_disable_radio(rt2x00dev);
 		break;
-	case STATE_RADIO_RX_ON:
-	case STATE_RADIO_RX_ON_LINK:
-	case STATE_RADIO_RX_OFF:
-	case STATE_RADIO_RX_OFF_LINK:
-		rt61pci_toggle_rx(rt2x00dev, state);
-		break;
 	case STATE_RADIO_IRQ_ON:
 	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
@@ -1789,10 +1871,10 @@ static void rt61pci_write_tx_desc(struct queue_entry *entry,
 	 * Start writing the descriptor words.
 	 */
 	rt2x00_desc_read(txd, 1, &word);
-	rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->qid);
-	rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
-	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
-	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
+	rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, entry->queue->qid);
+	rt2x00_set_field32(&word, TXD_W1_AIFSN, entry->queue->aifs);
+	rt2x00_set_field32(&word, TXD_W1_CWMIN, entry->queue->cw_min);
+	rt2x00_set_field32(&word, TXD_W1_CWMAX, entry->queue->cw_max);
 	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
 	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
 			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
@@ -1820,7 +1902,7 @@ static void rt61pci_write_tx_desc(struct queue_entry *entry,
 	rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
 	rt2x00_desc_write(txd, 5, word);
 
-	if (txdesc->qid != QID_BEACON) {
+	if (entry->queue->qid != QID_BEACON) {
 		rt2x00_desc_read(txd, 6, &word);
 		rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
 				   skbdesc->skb_dma);
@@ -1866,8 +1948,8 @@ static void rt61pci_write_tx_desc(struct queue_entry *entry,
 	 * Register descriptor details in skb frame descriptor.
 	 */
 	skbdesc->desc = txd;
-	skbdesc->desc_len =
-		(txdesc->qid == QID_BEACON) ?  TXINFO_SIZE : TXD_DESC_SIZE;
+	skbdesc->desc_len = (entry->queue->qid == QID_BEACON) ? TXINFO_SIZE :
+			    TXD_DESC_SIZE;
 }
 
 /*
@@ -1879,6 +1961,7 @@ static void rt61pci_write_beacon(struct queue_entry *entry,
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
 	unsigned int beacon_base;
+	unsigned int padding_len;
 	u32 reg;
 
 	/*
@@ -1900,13 +1983,16 @@ static void rt61pci_write_beacon(struct queue_entry *entry,
 	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 
 	/*
-	 * Write entire beacon with descriptor to register.
+	 * Write entire beacon with descriptor and padding to register.
 	 */
+	padding_len = roundup(entry->skb->len, 4) - entry->skb->len;
+	skb_pad(entry->skb, padding_len);
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
 	rt2x00pci_register_multiwrite(rt2x00dev, beacon_base,
 				      entry_priv->desc, TXINFO_SIZE);
 	rt2x00pci_register_multiwrite(rt2x00dev, beacon_base + TXINFO_SIZE,
-				      entry->skb->data, entry->skb->len);
+				      entry->skb->data,
+				      entry->skb->len + padding_len);
 
 	/*
 	 * Enable beaconing again.
@@ -1928,37 +2014,6 @@ static void rt61pci_write_beacon(struct queue_entry *entry,
 	entry->skb = NULL;
 }
 
-static void rt61pci_kick_tx_queue(struct data_queue *queue)
-{
-	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	u32 reg;
-
-	rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC0, (queue->qid == QID_AC_BE));
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC1, (queue->qid == QID_AC_BK));
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC2, (queue->qid == QID_AC_VI));
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC3, (queue->qid == QID_AC_VO));
-	rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
-}
-
-static void rt61pci_kill_tx_queue(struct data_queue *queue)
-{
-	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	u32 reg;
-
-	if (queue->qid == QID_BEACON) {
-		rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
-		return;
-	}
-
-	rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC0, (queue->qid == QID_AC_BE));
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, (queue->qid == QID_AC_BK));
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, (queue->qid == QID_AC_VI));
-	rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, (queue->qid == QID_AC_VO));
-	rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
-}
-
 /*
  * RX control handlers
  */
@@ -2078,7 +2133,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
 	 * that the TX_STA_FIFO stack has a size of 16. We stick to our
 	 * tx ring size for now.
 	 */
-	for (i = 0; i < TX_ENTRIES; i++) {
+	for (i = 0; i < rt2x00dev->ops->tx->entry_num; i++) {
 		rt2x00pci_register_read(rt2x00dev, STA_CSR4, &reg);
 		if (!rt2x00_get_field32(reg, STA_CSR4_VALID))
 			break;
@@ -2824,6 +2879,7 @@ static const struct ieee80211_ops rt61pci_mac80211_ops = {
 	.conf_tx		= rt61pci_conf_tx,
 	.get_tsf		= rt61pci_get_tsf,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
+	.flush			= rt2x00mac_flush,
 };
 
 static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
@@ -2842,10 +2898,11 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
 	.link_stats		= rt61pci_link_stats,
 	.reset_tuner		= rt61pci_reset_tuner,
 	.link_tuner		= rt61pci_link_tuner,
+	.start_queue		= rt61pci_start_queue,
+	.kick_queue		= rt61pci_kick_queue,
+	.stop_queue		= rt61pci_stop_queue,
 	.write_tx_desc		= rt61pci_write_tx_desc,
 	.write_beacon		= rt61pci_write_beacon,
-	.kick_tx_queue		= rt61pci_kick_tx_queue,
-	.kill_tx_queue		= rt61pci_kill_tx_queue,
 	.fill_rxdone		= rt61pci_fill_rxdone,
 	.config_shared_key	= rt61pci_config_shared_key,
 	.config_pairwise_key	= rt61pci_config_pairwise_key,
@@ -2857,21 +2914,21 @@ static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
 };
 
 static const struct data_queue_desc rt61pci_queue_rx = {
-	.entry_num		= RX_ENTRIES,
+	.entry_num		= 32,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= RXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
 };
 
 static const struct data_queue_desc rt61pci_queue_tx = {
-	.entry_num		= TX_ENTRIES,
+	.entry_num		= 32,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
 };
 
 static const struct data_queue_desc rt61pci_queue_bcn = {
-	.entry_num		= 4 * BEACON_ENTRIES,
+	.entry_num		= 4,
 	.data_size		= 0, /* No DMA required for beacons */
 	.desc_size		= TXINFO_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_pci),
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index e2e728ab0b2..e3cd6db76b0 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -412,7 +412,7 @@ struct hw_pairwise_ta_entry {
  * DROP_VERSION_ERROR: Drop version error frame.
  * DROP_MULTICAST: Drop multicast frames.
  * DROP_BORADCAST: Drop broadcast frames.
- * ROP_ACK_CTS: Drop received ACK and CTS.
+ * DROP_ACK_CTS: Drop received ACK and CTS.
  */
 #define TXRX_CSR0			0x3040
 #define TXRX_CSR0_RX_ACK_TIMEOUT	FIELD32(0x000001ff)
@@ -784,25 +784,25 @@ struct hw_pairwise_ta_entry {
  */
 
 /*
- * AC0_BASE_CSR: AC_BK base address.
+ * AC0_BASE_CSR: AC_VO base address.
  */
 #define AC0_BASE_CSR			0x3400
 #define AC0_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
 
 /*
- * AC1_BASE_CSR: AC_BE base address.
+ * AC1_BASE_CSR: AC_VI base address.
  */
 #define AC1_BASE_CSR			0x3404
 #define AC1_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
 
 /*
- * AC2_BASE_CSR: AC_VI base address.
+ * AC2_BASE_CSR: AC_BE base address.
  */
 #define AC2_BASE_CSR			0x3408
 #define AC2_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
 
 /*
- * AC3_BASE_CSR: AC_VO base address.
+ * AC3_BASE_CSR: AC_BK base address.
  */
 #define AC3_BASE_CSR			0x340c
 #define AC3_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
@@ -814,7 +814,7 @@ struct hw_pairwise_ta_entry {
 #define MGMT_BASE_CSR_RING_REGISTER	FIELD32(0xffffffff)
 
 /*
- * TX_RING_CSR0: TX Ring size for AC_BK, AC_BE, AC_VI, AC_VO.
+ * TX_RING_CSR0: TX Ring size for AC_VO, AC_VI, AC_BE, AC_BK.
  */
 #define TX_RING_CSR0			0x3418
 #define TX_RING_CSR0_AC0_RING_SIZE	FIELD32(0x000000ff)
@@ -833,10 +833,10 @@ struct hw_pairwise_ta_entry {
 
 /*
  * AIFSN_CSR: AIFSN for each EDCA AC.
- * AIFSN0: For AC_BK.
- * AIFSN1: For AC_BE.
- * AIFSN2: For AC_VI.
- * AIFSN3: For AC_VO.
+ * AIFSN0: For AC_VO.
+ * AIFSN1: For AC_VI.
+ * AIFSN2: For AC_BE.
+ * AIFSN3: For AC_BK.
  */
 #define AIFSN_CSR			0x3420
 #define AIFSN_CSR_AIFSN0		FIELD32(0x0000000f)
@@ -846,10 +846,10 @@ struct hw_pairwise_ta_entry {
 
 /*
  * CWMIN_CSR: CWmin for each EDCA AC.
- * CWMIN0: For AC_BK.
- * CWMIN1: For AC_BE.
- * CWMIN2: For AC_VI.
- * CWMIN3: For AC_VO.
+ * CWMIN0: For AC_VO.
+ * CWMIN1: For AC_VI.
+ * CWMIN2: For AC_BE.
+ * CWMIN3: For AC_BK.
  */
 #define CWMIN_CSR			0x3424
 #define CWMIN_CSR_CWMIN0		FIELD32(0x0000000f)
@@ -859,10 +859,10 @@ struct hw_pairwise_ta_entry {
 
 /*
  * CWMAX_CSR: CWmax for each EDCA AC.
- * CWMAX0: For AC_BK.
- * CWMAX1: For AC_BE.
- * CWMAX2: For AC_VI.
- * CWMAX3: For AC_VO.
+ * CWMAX0: For AC_VO.
+ * CWMAX1: For AC_VI.
+ * CWMAX2: For AC_BE.
+ * CWMAX3: For AC_BK.
  */
 #define CWMAX_CSR			0x3428
 #define CWMAX_CSR_CWMAX0		FIELD32(0x0000000f)
@@ -883,14 +883,14 @@ struct hw_pairwise_ta_entry {
 
 /*
  * TX_CNTL_CSR: KICK/Abort TX.
- * KICK_TX_AC0: For AC_BK.
- * KICK_TX_AC1: For AC_BE.
- * KICK_TX_AC2: For AC_VI.
- * KICK_TX_AC3: For AC_VO.
- * ABORT_TX_AC0: For AC_BK.
- * ABORT_TX_AC1: For AC_BE.
- * ABORT_TX_AC2: For AC_VI.
- * ABORT_TX_AC3: For AC_VO.
+ * KICK_TX_AC0: For AC_VO.
+ * KICK_TX_AC1: For AC_VI.
+ * KICK_TX_AC2: For AC_BE.
+ * KICK_TX_AC3: For AC_BK.
+ * ABORT_TX_AC0: For AC_VO.
+ * ABORT_TX_AC1: For AC_VI.
+ * ABORT_TX_AC2: For AC_BE.
+ * ABORT_TX_AC3: For AC_BK.
  */
 #define TX_CNTL_CSR			0x3430
 #define TX_CNTL_CSR_KICK_TX_AC0		FIELD32(0x00000001)
@@ -1010,18 +1010,18 @@ struct hw_pairwise_ta_entry {
 #define E2PROM_CSR_LOAD_STATUS		FIELD32(0x00000040)
 
 /*
- * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
- * AC0_TX_OP: For AC_BK, in unit of 32us.
- * AC1_TX_OP: For AC_BE, in unit of 32us.
+ * AC_TXOP_CSR0: AC_VO/AC_VI TXOP register.
+ * AC0_TX_OP: For AC_VO, in unit of 32us.
+ * AC1_TX_OP: For AC_VI, in unit of 32us.
  */
 #define AC_TXOP_CSR0			0x3474
 #define AC_TXOP_CSR0_AC0_TX_OP		FIELD32(0x0000ffff)
 #define AC_TXOP_CSR0_AC1_TX_OP		FIELD32(0xffff0000)
 
 /*
- * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
- * AC2_TX_OP: For AC_VI, in unit of 32us.
- * AC3_TX_OP: For AC_VO, in unit of 32us.
+ * AC_TXOP_CSR1: AC_BE/AC_BK TXOP register.
+ * AC2_TX_OP: For AC_BE, in unit of 32us.
+ * AC3_TX_OP: For AC_BK, in unit of 32us.
  */
 #define AC_TXOP_CSR1			0x3478
 #define AC_TXOP_CSR1_AC2_TX_OP		FIELD32(0x0000ffff)
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 9be8089317e..0b4e8590cbb 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -40,7 +40,7 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 0;
+static int modparam_nohwcrypt;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
@@ -1031,6 +1031,55 @@ dynamic_cca_tune:
 }
 
 /*
+ * Queue handlers.
+ */
+static void rt73usb_start_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
+		rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
+		rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
+		break;
+	case QID_BEACON:
+		rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
+		rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
+		rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+static void rt73usb_stop_queue(struct data_queue *queue)
+{
+	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+	u32 reg;
+
+	switch (queue->qid) {
+	case QID_RX:
+		rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
+		rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 1);
+		rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
+		break;
+	case QID_BEACON:
+		rt2x00usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
+		rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
+		rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
+		rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
+		break;
+	default:
+		break;
+	}
+}
+
+/*
  * Firmware functions
  */
 static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
@@ -1324,18 +1373,6 @@ static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
 /*
  * Device state switch handlers.
  */
-static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
-			      enum dev_state state)
-{
-	u32 reg;
-
-	rt2x00usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
-	rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
-			   (state == STATE_RADIO_RX_OFF) ||
-			   (state == STATE_RADIO_RX_OFF_LINK));
-	rt2x00usb_register_write(rt2x00dev, TXRX_CSR0, reg);
-}
-
 static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
 {
 	/*
@@ -1402,12 +1439,6 @@ static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
 	case STATE_RADIO_OFF:
 		rt73usb_disable_radio(rt2x00dev);
 		break;
-	case STATE_RADIO_RX_ON:
-	case STATE_RADIO_RX_ON_LINK:
-	case STATE_RADIO_RX_OFF:
-	case STATE_RADIO_RX_OFF_LINK:
-		rt73usb_toggle_rx(rt2x00dev, state);
-		break;
 	case STATE_RADIO_IRQ_ON:
 	case STATE_RADIO_IRQ_ON_ISR:
 	case STATE_RADIO_IRQ_OFF:
@@ -1472,10 +1503,10 @@ static void rt73usb_write_tx_desc(struct queue_entry *entry,
 	rt2x00_desc_write(txd, 0, word);
 
 	rt2x00_desc_read(txd, 1, &word);
-	rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->qid);
-	rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
-	rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
-	rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
+	rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, entry->queue->qid);
+	rt2x00_set_field32(&word, TXD_W1_AIFSN, entry->queue->aifs);
+	rt2x00_set_field32(&word, TXD_W1_CWMIN, entry->queue->cw_min);
+	rt2x00_set_field32(&word, TXD_W1_CWMAX, entry->queue->cw_max);
 	rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
 	rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
 			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
@@ -1515,6 +1546,7 @@ static void rt73usb_write_beacon(struct queue_entry *entry,
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
 	unsigned int beacon_base;
+	unsigned int padding_len;
 	u32 reg;
 
 	/*
@@ -1542,11 +1574,13 @@ static void rt73usb_write_beacon(struct queue_entry *entry,
 	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 
 	/*
-	 * Write entire beacon with descriptor to register.
+	 * Write entire beacon with descriptor and padding to register.
 	 */
+	padding_len = roundup(entry->skb->len, 4) - entry->skb->len;
+	skb_pad(entry->skb, padding_len);
 	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
-	rt2x00usb_register_multiwrite(rt2x00dev, beacon_base,
-				      entry->skb->data, entry->skb->len);
+	rt2x00usb_register_multiwrite(rt2x00dev, beacon_base, entry->skb->data,
+				      entry->skb->len + padding_len);
 
 	/*
 	 * Enable beaconing again.
@@ -1582,14 +1616,6 @@ static int rt73usb_get_tx_data_len(struct queue_entry *entry)
 	return length;
 }
 
-static void rt73usb_kill_tx_queue(struct data_queue *queue)
-{
-	if (queue->qid == QID_BEACON)
-		rt2x00usb_register_write(queue->rt2x00dev, TXRX_CSR9, 0);
-
-	rt2x00usb_kill_tx_queue(queue);
-}
-
 /*
  * RX control handlers
  */
@@ -2264,6 +2290,7 @@ static const struct ieee80211_ops rt73usb_mac80211_ops = {
 	.conf_tx		= rt73usb_conf_tx,
 	.get_tsf		= rt73usb_get_tsf,
 	.rfkill_poll		= rt2x00mac_rfkill_poll,
+	.flush			= rt2x00mac_flush,
 };
 
 static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
@@ -2280,11 +2307,13 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
 	.reset_tuner		= rt73usb_reset_tuner,
 	.link_tuner		= rt73usb_link_tuner,
 	.watchdog		= rt2x00usb_watchdog,
+	.start_queue		= rt73usb_start_queue,
+	.kick_queue		= rt2x00usb_kick_queue,
+	.stop_queue		= rt73usb_stop_queue,
+	.flush_queue		= rt2x00usb_flush_queue,
 	.write_tx_desc		= rt73usb_write_tx_desc,
 	.write_beacon		= rt73usb_write_beacon,
 	.get_tx_data_len	= rt73usb_get_tx_data_len,
-	.kick_tx_queue		= rt2x00usb_kick_tx_queue,
-	.kill_tx_queue		= rt73usb_kill_tx_queue,
 	.fill_rxdone		= rt73usb_fill_rxdone,
 	.config_shared_key	= rt73usb_config_shared_key,
 	.config_pairwise_key	= rt73usb_config_pairwise_key,
@@ -2296,21 +2325,21 @@ static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
 };
 
 static const struct data_queue_desc rt73usb_queue_rx = {
-	.entry_num		= RX_ENTRIES,
+	.entry_num		= 32,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= RXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
 };
 
 static const struct data_queue_desc rt73usb_queue_tx = {
-	.entry_num		= TX_ENTRIES,
+	.entry_num		= 32,
 	.data_size		= DATA_FRAME_SIZE,
 	.desc_size		= TXD_DESC_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
 };
 
 static const struct data_queue_desc rt73usb_queue_bcn = {
-	.entry_num		= 4 * BEACON_ENTRIES,
+	.entry_num		= 4,
 	.data_size		= MGMT_FRAME_SIZE,
 	.desc_size		= TXINFO_SIZE,
 	.priv_size		= sizeof(struct queue_entry_priv_usb),
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 44d5b2bebd3..9f6b470414d 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -322,7 +322,7 @@ struct hw_pairwise_ta_entry {
  * DROP_VERSION_ERROR: Drop version error frame.
  * DROP_MULTICAST: Drop multicast frames.
  * DROP_BORADCAST: Drop broadcast frames.
- * ROP_ACK_CTS: Drop received ACK and CTS.
+ * DROP_ACK_CTS: Drop received ACK and CTS.
  */
 #define TXRX_CSR0			0x3040
 #define TXRX_CSR0_RX_ACK_TIMEOUT	FIELD32(0x000001ff)
@@ -689,10 +689,10 @@ struct hw_pairwise_ta_entry {
 
 /*
  * AIFSN_CSR: AIFSN for each EDCA AC.
- * AIFSN0: For AC_BK.
- * AIFSN1: For AC_BE.
- * AIFSN2: For AC_VI.
- * AIFSN3: For AC_VO.
+ * AIFSN0: For AC_VO.
+ * AIFSN1: For AC_VI.
+ * AIFSN2: For AC_BE.
+ * AIFSN3: For AC_BK.
  */
 #define AIFSN_CSR			0x0400
 #define AIFSN_CSR_AIFSN0		FIELD32(0x0000000f)
@@ -702,10 +702,10 @@ struct hw_pairwise_ta_entry {
 
 /*
  * CWMIN_CSR: CWmin for each EDCA AC.
- * CWMIN0: For AC_BK.
- * CWMIN1: For AC_BE.
- * CWMIN2: For AC_VI.
- * CWMIN3: For AC_VO.
+ * CWMIN0: For AC_VO.
+ * CWMIN1: For AC_VI.
+ * CWMIN2: For AC_BE.
+ * CWMIN3: For AC_BK.
  */
 #define CWMIN_CSR			0x0404
 #define CWMIN_CSR_CWMIN0		FIELD32(0x0000000f)
@@ -715,10 +715,10 @@ struct hw_pairwise_ta_entry {
 
 /*
  * CWMAX_CSR: CWmax for each EDCA AC.
- * CWMAX0: For AC_BK.
- * CWMAX1: For AC_BE.
- * CWMAX2: For AC_VI.
- * CWMAX3: For AC_VO.
+ * CWMAX0: For AC_VO.
+ * CWMAX1: For AC_VI.
+ * CWMAX2: For AC_BE.
+ * CWMAX3: For AC_BK.
  */
 #define CWMAX_CSR			0x0408
 #define CWMAX_CSR_CWMAX0		FIELD32(0x0000000f)
@@ -727,18 +727,18 @@ struct hw_pairwise_ta_entry {
 #define CWMAX_CSR_CWMAX3		FIELD32(0x0000f000)
 
 /*
- * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
- * AC0_TX_OP: For AC_BK, in unit of 32us.
- * AC1_TX_OP: For AC_BE, in unit of 32us.
+ * AC_TXOP_CSR0: AC_VO/AC_VI TXOP register.
+ * AC0_TX_OP: For AC_VO, in unit of 32us.
+ * AC1_TX_OP: For AC_VI, in unit of 32us.
  */
 #define AC_TXOP_CSR0			0x040c
 #define AC_TXOP_CSR0_AC0_TX_OP		FIELD32(0x0000ffff)
 #define AC_TXOP_CSR0_AC1_TX_OP		FIELD32(0xffff0000)
 
 /*
- * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
- * AC2_TX_OP: For AC_VI, in unit of 32us.
- * AC3_TX_OP: For AC_VO, in unit of 32us.
+ * AC_TXOP_CSR1: AC_BE/AC_BK TXOP register.
+ * AC2_TX_OP: For AC_BE, in unit of 32us.
+ * AC3_TX_OP: For AC_BK, in unit of 32us.
  */
 #define AC_TXOP_CSR1			0x0410
 #define AC_TXOP_CSR1_AC2_TX_OP		FIELD32(0x0000ffff)
diff --git a/drivers/net/wireless/rtl818x/Makefile b/drivers/net/wireless/rtl818x/Makefile
index 93cbfbedb46..99756907692 100644
--- a/drivers/net/wireless/rtl818x/Makefile
+++ b/drivers/net/wireless/rtl818x/Makefile
@@ -1,7 +1,2 @@
-rtl8180-objs		:= rtl8180_dev.o rtl8180_rtl8225.o rtl8180_sa2400.o rtl8180_max2820.o rtl8180_grf5101.o
-rtl8187-objs		:= rtl8187_dev.o rtl8187_rtl8225.o rtl8187_leds.o rtl8187_rfkill.o
-
-obj-$(CONFIG_RTL8180)	+= rtl8180.o
-obj-$(CONFIG_RTL8187)	+= rtl8187.o
-
-
+obj-$(CONFIG_RTL8180)	+= rtl8180/
+obj-$(CONFIG_RTL8187)	+= rtl8187/
diff --git a/drivers/net/wireless/rtl818x/rtl8180/Makefile b/drivers/net/wireless/rtl818x/rtl8180/Makefile
new file mode 100644
index 00000000000..cb4fb8596f0
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8180/Makefile
@@ -0,0 +1,5 @@
+rtl8180-objs		:= dev.o rtl8225.o sa2400.o max2820.o grf5101.o
+
+obj-$(CONFIG_RTL8180)	+= rtl8180.o
+
+ccflags-y += -Idrivers/net/wireless/rtl818x
diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 707c688da61..5851cbc1e95 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -24,10 +24,10 @@
 #include <net/mac80211.h>
 
 #include "rtl8180.h"
-#include "rtl8180_rtl8225.h"
-#include "rtl8180_sa2400.h"
-#include "rtl8180_max2820.h"
-#include "rtl8180_grf5101.h"
+#include "rtl8225.h"
+#include "sa2400.h"
+#include "max2820.h"
+#include "grf5101.h"
 
 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
diff --git a/drivers/net/wireless/rtl818x/rtl8180_grf5101.c b/drivers/net/wireless/rtl818x/rtl8180/grf5101.c
index 5cab9dfa8c0..5ee7589dd54 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_grf5101.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/grf5101.c
@@ -25,7 +25,7 @@
 #include <net/mac80211.h>
 
 #include "rtl8180.h"
-#include "rtl8180_grf5101.h"
+#include "grf5101.h"
 
 static const int grf5101_encode[] = {
 	0x0, 0x8, 0x4, 0xC,
diff --git a/drivers/net/wireless/rtl818x/rtl8180_grf5101.h b/drivers/net/wireless/rtl818x/rtl8180/grf5101.h
index 76647111bcf..76647111bcf 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_grf5101.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/grf5101.h
diff --git a/drivers/net/wireless/rtl818x/rtl8180_max2820.c b/drivers/net/wireless/rtl818x/rtl8180/max2820.c
index 16c4655181c..667b3363d43 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_max2820.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/max2820.c
@@ -24,7 +24,7 @@
 #include <net/mac80211.h>
 
 #include "rtl8180.h"
-#include "rtl8180_max2820.h"
+#include "max2820.h"
 
 static const u32 max2820_chan[] = {
 	12, /* CH 1 */
diff --git a/drivers/net/wireless/rtl818x/rtl8180_max2820.h b/drivers/net/wireless/rtl818x/rtl8180/max2820.h
index 61cf6d1e7d5..61cf6d1e7d5 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_max2820.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/max2820.h
diff --git a/drivers/net/wireless/rtl818x/rtl8180.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
index 30523314da4..30523314da4 100644
--- a/drivers/net/wireless/rtl818x/rtl8180.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8180.h
diff --git a/drivers/net/wireless/rtl818x/rtl8180_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
index 69e4d4745da..7c4574ba9d7 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.c
@@ -21,7 +21,7 @@
 #include <net/mac80211.h>
 
 #include "rtl8180.h"
-#include "rtl8180_rtl8225.h"
+#include "rtl8225.h"
 
 static void rtl8225_write(struct ieee80211_hw *dev, u8 addr, u16 data)
 {
diff --git a/drivers/net/wireless/rtl818x/rtl8180_rtl8225.h b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.h
index 310013a2d72..310013a2d72 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_rtl8225.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/rtl8225.h
diff --git a/drivers/net/wireless/rtl818x/rtl8180_sa2400.c b/drivers/net/wireless/rtl818x/rtl8180/sa2400.c
index d064fcc5ec0..44771a6286a 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_sa2400.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/sa2400.c
@@ -25,7 +25,7 @@
 #include <net/mac80211.h>
 
 #include "rtl8180.h"
-#include "rtl8180_sa2400.h"
+#include "sa2400.h"
 
 static const u32 sa2400_chan[] = {
 	0x00096c, /* ch1 */
diff --git a/drivers/net/wireless/rtl818x/rtl8180_sa2400.h b/drivers/net/wireless/rtl818x/rtl8180/sa2400.h
index a4aaa0d413f..a4aaa0d413f 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_sa2400.h
+++ b/drivers/net/wireless/rtl818x/rtl8180/sa2400.h
diff --git a/drivers/net/wireless/rtl818x/rtl8187/Makefile b/drivers/net/wireless/rtl818x/rtl8187/Makefile
new file mode 100644
index 00000000000..7b6299268ec
--- /dev/null
+++ b/drivers/net/wireless/rtl818x/rtl8187/Makefile
@@ -0,0 +1,5 @@
+rtl8187-objs		:= dev.o rtl8225.o leds.o rfkill.o
+
+obj-$(CONFIG_RTL8187)	+= rtl8187.o
+
+ccflags-y += -Idrivers/net/wireless/rtl818x
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index 38fa8244cc9..6b82cac37ee 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -29,11 +29,11 @@
 #include <net/mac80211.h>
 
 #include "rtl8187.h"
-#include "rtl8187_rtl8225.h"
+#include "rtl8225.h"
 #ifdef CONFIG_RTL8187_LEDS
-#include "rtl8187_leds.h"
+#include "leds.h"
 #endif
-#include "rtl8187_rfkill.h"
+#include "rfkill.h"
 
 MODULE_AUTHOR("Michael Wu <flamingice@sourmilk.net>");
 MODULE_AUTHOR("Andrea Merello <andreamrl@tiscali.it>");
@@ -553,6 +553,46 @@ static int rtl8187b_init_status_urb(struct ieee80211_hw *dev)
 	return ret;
 }
 
+static void rtl8187_set_anaparam(struct rtl8187_priv *priv, bool rfon)
+{
+	u32 anaparam, anaparam2;
+	u8 anaparam3, reg;
+
+	if (!priv->is_rtl8187b) {
+		if (rfon) {
+			anaparam = RTL8187_RTL8225_ANAPARAM_ON;
+			anaparam2 = RTL8187_RTL8225_ANAPARAM2_ON;
+		} else {
+			anaparam = RTL8187_RTL8225_ANAPARAM_OFF;
+			anaparam2 = RTL8187_RTL8225_ANAPARAM2_OFF;
+		}
+	} else {
+		if (rfon) {
+			anaparam = RTL8187B_RTL8225_ANAPARAM_ON;
+			anaparam2 = RTL8187B_RTL8225_ANAPARAM2_ON;
+			anaparam3 = RTL8187B_RTL8225_ANAPARAM3_ON;
+		} else {
+			anaparam = RTL8187B_RTL8225_ANAPARAM_OFF;
+			anaparam2 = RTL8187B_RTL8225_ANAPARAM2_OFF;
+			anaparam3 = RTL8187B_RTL8225_ANAPARAM3_OFF;
+		}
+	}
+
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_CONFIG);
+	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
+	reg |= RTL818X_CONFIG3_ANAPARAM_WRITE;
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM, anaparam);
+	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2, anaparam2);
+	if (priv->is_rtl8187b)
+		rtl818x_iowrite8(priv, &priv->map->ANAPARAM3, anaparam3);
+	reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
+	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
+	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
+			 RTL818X_EEPROM_CMD_NORMAL);
+}
+
 static int rtl8187_cmd_reset(struct ieee80211_hw *dev)
 {
 	struct rtl8187_priv *priv = dev->priv;
@@ -603,19 +643,7 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
 	int res;
 
 	/* reset */
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg |
-			 RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
-			  RTL8187_RTL8225_ANAPARAM_ON);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
-			  RTL8187_RTL8225_ANAPARAM2_ON);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg &
-			 ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
+	rtl8187_set_anaparam(priv, true);
 
 	rtl818x_iowrite16(priv, &priv->map->INT_MASK, 0);
 
@@ -629,17 +657,7 @@ static int rtl8187_init_hw(struct ieee80211_hw *dev)
 	if (res)
 		return res;
 
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-			reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
-			  RTL8187_RTL8225_ANAPARAM_ON);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
-			  RTL8187_RTL8225_ANAPARAM2_ON);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3,
-			reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
+	rtl8187_set_anaparam(priv, true);
 
 	/* setup card */
 	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0);
@@ -712,10 +730,9 @@ static const u8 rtl8187b_reg_table[][3] = {
 
 	{0x58, 0x4B, 1}, {0x59, 0x00, 1}, {0x5A, 0x4B, 1}, {0x5B, 0x00, 1},
 	{0x60, 0x4B, 1}, {0x61, 0x09, 1}, {0x62, 0x4B, 1}, {0x63, 0x09, 1},
-	{0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xE0, 0xFF, 1}, {0xE1, 0x0F, 1},
-	{0xE2, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1}, {0xF2, 0x02, 1},
-	{0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1}, {0xF6, 0x06, 1},
-	{0xF7, 0x07, 1}, {0xF8, 0x08, 1},
+	{0xCE, 0x0F, 1}, {0xCF, 0x00, 1}, {0xF0, 0x4E, 1}, {0xF1, 0x01, 1},
+	{0xF2, 0x02, 1}, {0xF3, 0x03, 1}, {0xF4, 0x04, 1}, {0xF5, 0x05, 1},
+	{0xF6, 0x06, 1}, {0xF7, 0x07, 1}, {0xF8, 0x08, 1},
 
 	{0x4E, 0x00, 2}, {0x0C, 0x04, 2}, {0x21, 0x61, 2}, {0x22, 0x68, 2},
 	{0x23, 0x6F, 2}, {0x24, 0x76, 2}, {0x25, 0x7D, 2}, {0x26, 0x84, 2},
@@ -723,14 +740,13 @@ static const u8 rtl8187b_reg_table[][3] = {
 	{0x52, 0x04, 2}, {0x53, 0xA0, 2}, {0x54, 0x1F, 2}, {0x55, 0x23, 2},
 	{0x56, 0x45, 2}, {0x57, 0x67, 2}, {0x58, 0x08, 2}, {0x59, 0x08, 2},
 	{0x5A, 0x08, 2}, {0x5B, 0x08, 2}, {0x60, 0x08, 2}, {0x61, 0x08, 2},
-	{0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2}, {0x72, 0x56, 2},
-	{0x73, 0x9A, 2},
+	{0x62, 0x08, 2}, {0x63, 0x08, 2}, {0x64, 0xCF, 2},
 
-	{0x34, 0xF0, 0}, {0x35, 0x0F, 0}, {0x5B, 0x40, 0}, {0x84, 0x88, 0},
-	{0x85, 0x24, 0}, {0x88, 0x54, 0}, {0x8B, 0xB8, 0}, {0x8C, 0x07, 0},
-	{0x8D, 0x00, 0}, {0x94, 0x1B, 0}, {0x95, 0x12, 0}, {0x96, 0x00, 0},
-	{0x97, 0x06, 0}, {0x9D, 0x1A, 0}, {0x9F, 0x10, 0}, {0xB4, 0x22, 0},
-	{0xBE, 0x80, 0}, {0xDB, 0x00, 0}, {0xEE, 0x00, 0}, {0x4C, 0x00, 2},
+	{0x5B, 0x40, 0}, {0x84, 0x88, 0}, {0x85, 0x24, 0}, {0x88, 0x54, 0},
+	{0x8B, 0xB8, 0}, {0x8C, 0x07, 0}, {0x8D, 0x00, 0}, {0x94, 0x1B, 0},
+	{0x95, 0x12, 0}, {0x96, 0x00, 0}, {0x97, 0x06, 0}, {0x9D, 0x1A, 0},
+	{0x9F, 0x10, 0}, {0xB4, 0x22, 0}, {0xBE, 0x80, 0}, {0xDB, 0x00, 0},
+	{0xEE, 0x00, 0}, {0x4C, 0x00, 2},
 
 	{0x9F, 0x00, 3}, {0x8C, 0x01, 0}, {0x8D, 0x10, 0}, {0x8E, 0x08, 0},
 	{0x8F, 0x00, 0}
@@ -742,48 +758,34 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
 	int res, i;
 	u8 reg;
 
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	reg |= RTL818X_CONFIG3_ANAPARAM_WRITE | RTL818X_CONFIG3_GNT_SELECT;
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
-			  RTL8187B_RTL8225_ANAPARAM2_ON);
-	rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
-			  RTL8187B_RTL8225_ANAPARAM_ON);
-	rtl818x_iowrite8(priv, &priv->map->ANAPARAM3,
-			 RTL8187B_RTL8225_ANAPARAM3_ON);
+	rtl8187_set_anaparam(priv, true);
 
+	/* Reset PLL sequence on 8187B. Realtek note: reduces power
+	 * consumption about 30 mA */
 	rtl818x_iowrite8(priv, (u8 *)0xFF61, 0x10);
 	reg = rtl818x_ioread8(priv, (u8 *)0xFF62);
 	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg & ~(1 << 5));
 	rtl818x_iowrite8(priv, (u8 *)0xFF62, reg | (1 << 5));
 
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	reg &= ~RTL818X_CONFIG3_ANAPARAM_WRITE;
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
-
 	res = rtl8187_cmd_reset(dev);
 	if (res)
 		return res;
 
-	rtl818x_iowrite16(priv, (__le16 *)0xFF2D, 0x0FFF);
+	rtl8187_set_anaparam(priv, true);
+
+	/* BRSR (Basic Rate Set Register) on 8187B looks to be the same as
+	 * RESP_RATE on 8187L in Realtek sources: each bit should be each
+	 * one of the 12 rates, all are enabled */
+	rtl818x_iowrite16(priv, (__le16 *)0xFF34, 0x0FFF);
+
 	reg = rtl818x_ioread8(priv, &priv->map->CW_CONF);
 	reg |= RTL818X_CW_CONF_PERPACKET_RETRY_SHIFT;
 	rtl818x_iowrite8(priv, &priv->map->CW_CONF, reg);
-	reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
-	reg |= RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT |
-	       RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
-	rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
 
+	/* Auto Rate Fallback Register (ARFR): 1M-54M setting */
 	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFE0, 0x0FFF, 1);
+	rtl818x_iowrite8_idx(priv, (u8 *)0xFFE2, 0x00, 1);
 
-	rtl818x_iowrite16(priv, &priv->map->BEACON_INTERVAL, 100);
-	rtl818x_iowrite16(priv, &priv->map->ATIM_WND, 2);
 	rtl818x_iowrite16_idx(priv, (__le16 *)0xFFD4, 0xFFFF, 1);
 
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
@@ -811,16 +813,9 @@ static int rtl8187b_init_hw(struct ieee80211_hw *dev)
 
 	rtl818x_iowrite32(priv, &priv->map->RF_TIMING, 0x00004001);
 
+	/* RFSW_CTRL register */
 	rtl818x_iowrite16_idx(priv, (__le16 *)0xFF72, 0x569A, 2);
 
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	reg |= RTL818X_CONFIG3_ANAPARAM_WRITE;
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD,
-			 RTL818X_EEPROM_CMD_NORMAL);
-
 	rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, 0x0480);
 	rtl818x_iowrite16(priv, &priv->map->RFPinsSelect, 0x2488);
 	rtl818x_iowrite16(priv, &priv->map->RFPinsEnable, 0x1FFF);
@@ -929,6 +924,12 @@ static int rtl8187_start(struct ieee80211_hw *dev)
 		priv->rx_conf = reg;
 		rtl818x_iowrite32(priv, &priv->map->RX_CONF, reg);
 
+		reg = rtl818x_ioread8(priv, &priv->map->TX_AGC_CTL);
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_GAIN_SHIFT;
+		reg &= ~RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT;
+		reg &= ~RTL818X_TX_AGC_CTL_FEEDBACK_ANT;
+		rtl818x_iowrite8(priv, &priv->map->TX_AGC_CTL, reg);
+
 		rtl818x_iowrite32(priv, &priv->map->TX_CONF,
 				  RTL818X_TX_CONF_HW_SEQNUM |
 				  RTL818X_TX_CONF_DISREQQSIZE |
@@ -1002,6 +1003,7 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
 	rtl818x_iowrite8(priv, &priv->map->CMD, reg);
 
 	priv->rf->stop(dev);
+	rtl8187_set_anaparam(priv, false);
 
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
 	reg = rtl818x_ioread8(priv, &priv->map->CONFIG4);
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187/leds.c
index 4637337d5ce..2e0de2f5f0f 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/leds.c
@@ -20,7 +20,7 @@
 #include <linux/eeprom_93cx6.h>
 
 #include "rtl8187.h"
-#include "rtl8187_leds.h"
+#include "leds.h"
 
 static void led_turn_on(struct work_struct *work)
 {
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.h b/drivers/net/wireless/rtl818x/rtl8187/leds.h
index d743c96d4a2..d743c96d4a2 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.h
+++ b/drivers/net/wireless/rtl818x/rtl8187/leds.h
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187/rfkill.c
index 03555e1e0ca..34116719974 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/rfkill.c
@@ -18,7 +18,7 @@
 #include <net/mac80211.h>
 
 #include "rtl8187.h"
-#include "rtl8187_rfkill.h"
+#include "rfkill.h"
 
 static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv)
 {
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.h b/drivers/net/wireless/rtl818x/rtl8187/rfkill.h
index e12575e96d1..e12575e96d1 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rfkill.h
+++ b/drivers/net/wireless/rtl818x/rtl8187/rfkill.h
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
index 98878160a65..0d7b1423f77 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8187.h
@@ -16,7 +16,7 @@
 #define RTL8187_H
 
 #include "rtl818x.h"
-#include "rtl8187_leds.h"
+#include "leds.h"
 
 #define RTL8187_EEPROM_TXPWR_BASE	0x05
 #define RTL8187_EEPROM_MAC_ADDR		0x07
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c
index 97eebdcf7eb..908903f721f 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.c
@@ -21,7 +21,7 @@
 #include <net/mac80211.h>
 
 #include "rtl8187.h"
-#include "rtl8187_rtl8225.h"
+#include "rtl8225.h"
 
 static void rtl8225_write_bitbang(struct ieee80211_hw *dev, u8 addr, u16 data)
 {
@@ -898,29 +898,7 @@ static void rtl8225z2_b_rf_init(struct ieee80211_hw *dev)
 
 static void rtl8225_rf_stop(struct ieee80211_hw *dev)
 {
-	u8 reg;
-	struct rtl8187_priv *priv = dev->priv;
-
 	rtl8225_write(dev, 0x4, 0x1f);
-
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_CONFIG);
-	reg = rtl818x_ioread8(priv, &priv->map->CONFIG3);
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg | RTL818X_CONFIG3_ANAPARAM_WRITE);
-	if (!priv->is_rtl8187b) {
-		rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
-				  RTL8187_RTL8225_ANAPARAM2_OFF);
-		rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
-				  RTL8187_RTL8225_ANAPARAM_OFF);
-	} else {
-		rtl818x_iowrite32(priv, &priv->map->ANAPARAM2,
-				  RTL8187B_RTL8225_ANAPARAM2_OFF);
-		rtl818x_iowrite32(priv, &priv->map->ANAPARAM,
-				  RTL8187B_RTL8225_ANAPARAM_OFF);
-		rtl818x_iowrite8(priv, &priv->map->ANAPARAM3,
-				  RTL8187B_RTL8225_ANAPARAM3_OFF);
-	}
-	rtl818x_iowrite8(priv, &priv->map->CONFIG3, reg & ~RTL818X_CONFIG3_ANAPARAM_WRITE);
-	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 }
 
 static void rtl8225_rf_set_channel(struct ieee80211_hw *dev,
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.h b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h
index 20c5b6ead0f..20c5b6ead0f 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.h
+++ b/drivers/net/wireless/rtl818x/rtl8187/rtl8225.h
diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig
new file mode 100644
index 00000000000..7f6573f7f47
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/Kconfig
@@ -0,0 +1,15 @@
+config RTL8192CE
+	tristate "Realtek RTL8192CE/RTL8188SE Wireless Network Adapter"
+	depends on MAC80211 && EXPERIMENTAL
+	select FW_LOADER
+	select RTLWIFI
+	---help---
+	This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe
+	wireless network adapters.
+
+	If you choose to build it as a module, it will be called rtl8192ce
+
+config RTLWIFI
+	tristate
+	depends on RTL8192CE
+	default m
diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile
new file mode 100644
index 00000000000..2a7a4384f8e
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/Makefile
@@ -0,0 +1,13 @@
+obj-$(CONFIG_RTLWIFI) 		+= rtlwifi.o
+rtlwifi-objs	:=		\
+		base.o		\
+		cam.o		\
+		core.o		\
+		debug.o		\
+		efuse.o		\
+		pci.o		\
+		ps.o		\
+		rc.o		\
+		regd.o
+
+obj-$(CONFIG_RTL8192CE)		+= rtl8192ce/
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
new file mode 100644
index 00000000000..cf0b73e51fc
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -0,0 +1,956 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include <linux/ip.h>
+#include "wifi.h"
+#include "rc.h"
+#include "base.h"
+#include "efuse.h"
+#include "cam.h"
+#include "ps.h"
+#include "regd.h"
+
+/*
+ *NOTICE!!!: This file will be very big, we hsould
+ *keep it clear under follwing roles:
+ *
+ *This file include follwing part, so, if you add new
+ *functions into this file, please check which part it
+ *should includes. or check if you should add new part
+ *for this file:
+ *
+ *1) mac80211 init functions
+ *2) tx information functions
+ *3) functions called by core.c
+ *4) wq & timer callback functions
+ *5) frame process functions
+ *6) sysfs functions
+ *7) ...
+ */
+
+/*********************************************************
+ *
+ * mac80211 init functions
+ *
+ *********************************************************/
+static struct ieee80211_channel rtl_channeltable[] = {
+	{.center_freq = 2412, .hw_value = 1,},
+	{.center_freq = 2417, .hw_value = 2,},
+	{.center_freq = 2422, .hw_value = 3,},
+	{.center_freq = 2427, .hw_value = 4,},
+	{.center_freq = 2432, .hw_value = 5,},
+	{.center_freq = 2437, .hw_value = 6,},
+	{.center_freq = 2442, .hw_value = 7,},
+	{.center_freq = 2447, .hw_value = 8,},
+	{.center_freq = 2452, .hw_value = 9,},
+	{.center_freq = 2457, .hw_value = 10,},
+	{.center_freq = 2462, .hw_value = 11,},
+	{.center_freq = 2467, .hw_value = 12,},
+	{.center_freq = 2472, .hw_value = 13,},
+	{.center_freq = 2484, .hw_value = 14,},
+};
+
+static struct ieee80211_rate rtl_ratetable[] = {
+	{.bitrate = 10, .hw_value = 0x00,},
+	{.bitrate = 20, .hw_value = 0x01,},
+	{.bitrate = 55, .hw_value = 0x02,},
+	{.bitrate = 110, .hw_value = 0x03,},
+	{.bitrate = 60, .hw_value = 0x04,},
+	{.bitrate = 90, .hw_value = 0x05,},
+	{.bitrate = 120, .hw_value = 0x06,},
+	{.bitrate = 180, .hw_value = 0x07,},
+	{.bitrate = 240, .hw_value = 0x08,},
+	{.bitrate = 360, .hw_value = 0x09,},
+	{.bitrate = 480, .hw_value = 0x0a,},
+	{.bitrate = 540, .hw_value = 0x0b,},
+};
+
+static const struct ieee80211_supported_band rtl_band_2ghz = {
+	.band = IEEE80211_BAND_2GHZ,
+
+	.channels = rtl_channeltable,
+	.n_channels = ARRAY_SIZE(rtl_channeltable),
+
+	.bitrates = rtl_ratetable,
+	.n_bitrates = ARRAY_SIZE(rtl_ratetable),
+
+	.ht_cap = {0},
+};
+
+static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw,
+				  struct ieee80211_sta_ht_cap *ht_cap)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	ht_cap->ht_supported = true;
+	ht_cap->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+	    IEEE80211_HT_CAP_SGI_40 |
+	    IEEE80211_HT_CAP_SGI_20 |
+	    IEEE80211_HT_CAP_DSSSCCK40 | IEEE80211_HT_CAP_MAX_AMSDU;
+
+	/*
+	 *Maximum length of AMPDU that the STA can receive.
+	 *Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets)
+	 */
+	ht_cap->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K;
+
+	/*Minimum MPDU start spacing , */
+	ht_cap->ampdu_density = IEEE80211_HT_MPDU_DENSITY_16;
+
+	ht_cap->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED;
+
+	/*
+	 *hw->wiphy->bands[IEEE80211_BAND_2GHZ]
+	 *base on ant_num
+	 *rx_mask: RX mask
+	 *if rx_ant =1 rx_mask[0]=0xff;==>MCS0-MCS7
+	 *if rx_ant =2 rx_mask[1]=0xff;==>MCS8-MCS15
+	 *if rx_ant >=3 rx_mask[2]=0xff;
+	 *if BW_40 rx_mask[4]=0x01;
+	 *highest supported RX rate
+	 */
+	if (get_rf_type(rtlphy) == RF_1T2R || get_rf_type(rtlphy) == RF_2T2R) {
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("1T2R or 2T2R\n"));
+
+		ht_cap->mcs.rx_mask[0] = 0xFF;
+		ht_cap->mcs.rx_mask[1] = 0xFF;
+		ht_cap->mcs.rx_mask[4] = 0x01;
+
+		ht_cap->mcs.rx_highest = MAX_BIT_RATE_40MHZ_MCS15;
+	} else if (get_rf_type(rtlphy) == RF_1T1R) {
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("1T1R\n"));
+
+		ht_cap->mcs.rx_mask[0] = 0xFF;
+		ht_cap->mcs.rx_mask[1] = 0x00;
+		ht_cap->mcs.rx_mask[4] = 0x01;
+
+		ht_cap->mcs.rx_highest = MAX_BIT_RATE_40MHZ_MCS7;
+	}
+}
+
+static void _rtl_init_mac80211(struct ieee80211_hw *hw)
+{
+	struct rtl_mac *rtlmac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct ieee80211_supported_band *sband;
+
+	/* <1> use  mac->bands as mem for hw->wiphy->bands */
+	sband = &(rtlmac->bands[IEEE80211_BAND_2GHZ]);
+
+	/*
+	 * <2> set hw->wiphy->bands[IEEE80211_BAND_2GHZ]
+	 * to default value(1T1R)
+	 */
+	memcpy(&(rtlmac->bands[IEEE80211_BAND_2GHZ]), &rtl_band_2ghz,
+	       sizeof(struct ieee80211_supported_band));
+
+	/* <3> init ht cap base on ant_num */
+	_rtl_init_hw_ht_capab(hw, &sband->ht_cap);
+
+	/* <4> set mac->sband to wiphy->sband */
+	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
+
+	/* <5> set hw caps */
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
+	    IEEE80211_HW_RX_INCLUDES_FCS |
+	    IEEE80211_HW_BEACON_FILTER | IEEE80211_HW_AMPDU_AGGREGATION | /*PS*/
+	    /*IEEE80211_HW_SUPPORTS_PS | */
+	    /*IEEE80211_HW_PS_NULLFUNC_STACK | */
+	    /*IEEE80211_HW_SUPPORTS_DYNAMIC_PS | */
+	    IEEE80211_HW_REPORTS_TX_ACK_STATUS | 0;
+
+	hw->wiphy->interface_modes =
+	    BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);
+
+	hw->wiphy->rts_threshold = 2347;
+
+	hw->queues = AC_MAX;
+	hw->extra_tx_headroom = RTL_TX_HEADER_SIZE;
+
+	/* TODO: Correct this value for our hw */
+	/* TODO: define these hard code value */
+	hw->channel_change_time = 100;
+	hw->max_listen_interval = 5;
+	hw->max_rate_tries = 4;
+	/* hw->max_rates = 1; */
+
+	/* <6> mac address */
+	if (is_valid_ether_addr(rtlefuse->dev_addr)) {
+		SET_IEEE80211_PERM_ADDR(hw, rtlefuse->dev_addr);
+	} else {
+		u8 rtlmac[] = { 0x00, 0xe0, 0x4c, 0x81, 0x92, 0x00 };
+		get_random_bytes((rtlmac + (ETH_ALEN - 1)), 1);
+		SET_IEEE80211_PERM_ADDR(hw, rtlmac);
+	}
+
+}
+
+static void _rtl_init_deferred_work(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	/* <1> timer */
+	init_timer(&rtlpriv->works.watchdog_timer);
+	setup_timer(&rtlpriv->works.watchdog_timer,
+		    rtl_watch_dog_timer_callback, (unsigned long)hw);
+
+	/* <2> work queue */
+	rtlpriv->works.hw = hw;
+	rtlpriv->works.rtl_wq = alloc_workqueue(rtlpriv->cfg->name, 0, 0);
+	INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
+			  (void *)rtl_watchdog_wq_callback);
+	INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,
+			  (void *)rtl_ips_nic_off_wq_callback);
+
+}
+
+void rtl_deinit_deferred_work(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	del_timer_sync(&rtlpriv->works.watchdog_timer);
+
+	cancel_delayed_work(&rtlpriv->works.watchdog_wq);
+	cancel_delayed_work(&rtlpriv->works.ips_nic_off_wq);
+}
+
+void rtl_init_rfkill(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	bool radio_state;
+	bool blocked;
+	u8 valid = 0;
+
+	radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw, &valid);
+
+	/*set init state to that of switch */
+	rtlpriv->rfkill.rfkill_state = radio_state;
+	printk(KERN_INFO "rtlwifi: wireless switch is %s\n",
+	       rtlpriv->rfkill.rfkill_state ? "on" : "off");
+
+	if (valid) {
+		rtlpriv->rfkill.rfkill_state = radio_state;
+
+		blocked = (rtlpriv->rfkill.rfkill_state == 1) ? 0 : 1;
+		wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
+	}
+
+	wiphy_rfkill_start_polling(hw->wiphy);
+}
+
+void rtl_deinit_rfkill(struct ieee80211_hw *hw)
+{
+	wiphy_rfkill_stop_polling(hw->wiphy);
+}
+
+int rtl_init_core(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *rtlmac = rtl_mac(rtl_priv(hw));
+
+	/* <1> init mac80211 */
+	_rtl_init_mac80211(hw);
+	rtlmac->hw = hw;
+
+	/* <2> rate control register */
+	if (rtl_rate_control_register()) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("rtl: Unable to register rtl_rc,"
+			  "use default RC !!\n"));
+	} else {
+		hw->rate_control_algorithm = "rtl_rc";
+	}
+
+	/*
+	 * <3> init CRDA must come after init
+	 * mac80211 hw  in _rtl_init_mac80211.
+	 */
+	if (rtl_regd_init(hw, rtl_reg_notifier)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("REGD init failed\n"));
+		return 1;
+	} else {
+		/* CRDA regd hint must after init CRDA */
+		if (regulatory_hint(hw->wiphy, rtlpriv->regd.alpha2)) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+				 ("regulatory_hint fail\n"));
+		}
+	}
+
+	/* <4> locks */
+	mutex_init(&rtlpriv->locks.conf_mutex);
+	spin_lock_init(&rtlpriv->locks.ips_lock);
+	spin_lock_init(&rtlpriv->locks.irq_th_lock);
+	spin_lock_init(&rtlpriv->locks.h2c_lock);
+	spin_lock_init(&rtlpriv->locks.rf_ps_lock);
+	spin_lock_init(&rtlpriv->locks.rf_lock);
+	spin_lock_init(&rtlpriv->locks.lps_lock);
+
+	rtlmac->link_state = MAC80211_NOLINK;
+
+	/* <5> init deferred work */
+	_rtl_init_deferred_work(hw);
+
+	return 0;
+}
+
+void rtl_deinit_core(struct ieee80211_hw *hw)
+{
+	 /*RC*/
+	rtl_rate_control_unregister();
+}
+
+void rtl_init_rx_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RCR, (u8 *) (&mac->rx_conf));
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_MGT_FILTER,
+				      (u8 *) (&mac->rx_mgt_filter));
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_CTRL_FILTER,
+				      (u8 *) (&mac->rx_ctrl_filter));
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_DATA_FILTER,
+				      (u8 *) (&mac->rx_data_filter));
+}
+
+/*********************************************************
+ *
+ * tx information functions
+ *
+ *********************************************************/
+static void _rtl_qurey_shortpreamble_mode(struct ieee80211_hw *hw,
+					  struct rtl_tcb_desc *tcb_desc,
+					  struct ieee80211_tx_info *info)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 rate_flag = info->control.rates[0].flags;
+
+	tcb_desc->use_shortpreamble = false;
+
+	/* 1M can only use Long Preamble. 11B spec */
+	if (tcb_desc->hw_rate == rtlpriv->cfg->maps[RTL_RC_CCK_RATE1M])
+		return;
+	else if (rate_flag & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
+		tcb_desc->use_shortpreamble = true;
+
+	return;
+}
+
+static void _rtl_query_shortgi(struct ieee80211_hw *hw,
+			       struct rtl_tcb_desc *tcb_desc,
+			       struct ieee80211_tx_info *info)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u8 rate_flag = info->control.rates[0].flags;
+
+	tcb_desc->use_shortgi = false;
+
+	if (!mac->ht_enable)
+		return;
+
+	if (!mac->sgi_40 && !mac->sgi_20)
+		return;
+
+	if ((mac->bw_40 == true) && mac->sgi_40)
+		tcb_desc->use_shortgi = true;
+	else if ((mac->bw_40 == false) && mac->sgi_20)
+		tcb_desc->use_shortgi = true;
+
+	if (!(rate_flag & IEEE80211_TX_RC_SHORT_GI))
+		tcb_desc->use_shortgi = false;
+
+}
+
+static void _rtl_query_protection_mode(struct ieee80211_hw *hw,
+				       struct rtl_tcb_desc *tcb_desc,
+				       struct ieee80211_tx_info *info)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 rate_flag = info->control.rates[0].flags;
+
+	/* Common Settings */
+	tcb_desc->b_rts_stbc = false;
+	tcb_desc->b_cts_enable = false;
+	tcb_desc->rts_sc = 0;
+	tcb_desc->b_rts_bw = false;
+	tcb_desc->b_rts_use_shortpreamble = false;
+	tcb_desc->b_rts_use_shortgi = false;
+
+	if (rate_flag & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+		/* Use CTS-to-SELF in protection mode. */
+		tcb_desc->b_rts_enable = true;
+		tcb_desc->b_cts_enable = true;
+		tcb_desc->rts_rate = rtlpriv->cfg->maps[RTL_RC_OFDM_RATE24M];
+	} else if (rate_flag & IEEE80211_TX_RC_USE_RTS_CTS) {
+		/* Use RTS-CTS in protection mode. */
+		tcb_desc->b_rts_enable = true;
+		tcb_desc->rts_rate = rtlpriv->cfg->maps[RTL_RC_OFDM_RATE24M];
+	}
+
+}
+
+static void _rtl_txrate_selectmode(struct ieee80211_hw *hw,
+				   struct rtl_tcb_desc *tcb_desc)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	if (!tcb_desc->disable_ratefallback || !tcb_desc->use_driver_rate) {
+		if (mac->opmode == NL80211_IFTYPE_STATION)
+			tcb_desc->ratr_index = 0;
+		else if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+			if (tcb_desc->b_multicast || tcb_desc->b_broadcast) {
+				tcb_desc->hw_rate =
+				    rtlpriv->cfg->maps[RTL_RC_CCK_RATE2M];
+				tcb_desc->use_driver_rate = 1;
+			} else {
+				/* TODO */
+			}
+		}
+	}
+
+	if (rtlpriv->dm.b_useramask) {
+		/* TODO we will differentiate adhoc and station futrue  */
+		tcb_desc->mac_id = 0;
+
+		if ((mac->mode == WIRELESS_MODE_N_24G) ||
+		    (mac->mode == WIRELESS_MODE_N_5G)) {
+			tcb_desc->ratr_index = RATR_INX_WIRELESS_NGB;
+		} else if (mac->mode & WIRELESS_MODE_G) {
+			tcb_desc->ratr_index = RATR_INX_WIRELESS_GB;
+		} else if (mac->mode & WIRELESS_MODE_B) {
+			tcb_desc->ratr_index = RATR_INX_WIRELESS_B;
+		}
+	}
+
+}
+
+static void _rtl_query_bandwidth_mode(struct ieee80211_hw *hw,
+				      struct rtl_tcb_desc *tcb_desc)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	tcb_desc->b_packet_bw = false;
+
+	if (!mac->bw_40 || !mac->ht_enable)
+		return;
+
+	if (tcb_desc->b_multicast || tcb_desc->b_broadcast)
+		return;
+
+	/*use legency rate, shall use 20MHz */
+	if (tcb_desc->hw_rate <= rtlpriv->cfg->maps[RTL_RC_OFDM_RATE54M])
+		return;
+
+	tcb_desc->b_packet_bw = true;
+}
+
+static u8 _rtl_get_highest_n_rate(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u8 hw_rate;
+
+	if (get_rf_type(rtlphy) == RF_2T2R)
+		hw_rate = rtlpriv->cfg->maps[RTL_RC_HT_RATEMCS15];
+	else
+		hw_rate = rtlpriv->cfg->maps[RTL_RC_HT_RATEMCS7];
+
+	return hw_rate;
+}
+
+void rtl_get_tcb_desc(struct ieee80211_hw *hw,
+		      struct ieee80211_tx_info *info,
+		      struct sk_buff *skb, struct rtl_tcb_desc *tcb_desc)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *rtlmac = rtl_mac(rtl_priv(hw));
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
+	struct ieee80211_rate *txrate;
+	u16 fc = le16_to_cpu(hdr->frame_control);
+
+	memset(tcb_desc, 0, sizeof(struct rtl_tcb_desc));
+
+	if (ieee80211_is_data(fc)) {
+		txrate = ieee80211_get_tx_rate(hw, info);
+		tcb_desc->hw_rate = txrate->hw_value;
+
+		/*
+		 *we set data rate RTL_RC_CCK_RATE1M
+		 *in rtl_rc.c   if skb is special data or
+		 *mgt which need low data rate.
+		 */
+
+		/*
+		 *So tcb_desc->hw_rate is just used for
+		 *special data and mgt frames
+		 */
+		if (tcb_desc->hw_rate < rtlpriv->cfg->maps[RTL_RC_CCK_RATE11M]) {
+			tcb_desc->use_driver_rate = true;
+			tcb_desc->ratr_index = 7;
+
+			tcb_desc->hw_rate =
+			    rtlpriv->cfg->maps[RTL_RC_CCK_RATE1M];
+			tcb_desc->disable_ratefallback = 1;
+		} else {
+			/*
+			 *because hw will nerver use hw_rate
+			 *when tcb_desc->use_driver_rate = false
+			 *so we never set highest N rate here,
+			 *and N rate will all be controled by FW
+			 *when tcb_desc->use_driver_rate = false
+			 */
+			if (rtlmac->ht_enable) {
+				tcb_desc->hw_rate = _rtl_get_highest_n_rate(hw);
+			} else {
+				if (rtlmac->mode == WIRELESS_MODE_B) {
+					tcb_desc->hw_rate =
+					   rtlpriv->cfg->maps[RTL_RC_CCK_RATE11M];
+				} else {
+					tcb_desc->hw_rate =
+					   rtlpriv->cfg->maps[RTL_RC_OFDM_RATE54M];
+				}
+			}
+		}
+
+		if (is_multicast_ether_addr(ieee80211_get_DA(hdr)))
+			tcb_desc->b_multicast = 1;
+		else if (is_broadcast_ether_addr(ieee80211_get_DA(hdr)))
+			tcb_desc->b_broadcast = 1;
+
+		_rtl_txrate_selectmode(hw, tcb_desc);
+		_rtl_query_bandwidth_mode(hw, tcb_desc);
+		_rtl_qurey_shortpreamble_mode(hw, tcb_desc, info);
+		_rtl_query_shortgi(hw, tcb_desc, info);
+		_rtl_query_protection_mode(hw, tcb_desc, info);
+	} else {
+		tcb_desc->use_driver_rate = true;
+		tcb_desc->ratr_index = 7;
+		tcb_desc->disable_ratefallback = 1;
+		tcb_desc->mac_id = 0;
+
+		tcb_desc->hw_rate = rtlpriv->cfg->maps[RTL_RC_CCK_RATE1M];
+	}
+}
+EXPORT_SYMBOL(rtl_get_tcb_desc);
+
+bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
+	u16 fc = le16_to_cpu(hdr->frame_control);
+
+	if (ieee80211_is_auth(fc)) {
+		RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, ("MAC80211_LINKING\n"));
+		rtl_ips_nic_on(hw);
+
+		mac->link_state = MAC80211_LINKING;
+	}
+
+	return true;
+}
+
+bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 fc = le16_to_cpu(hdr->frame_control);
+	u8 *act = (u8 *) (((u8 *) skb->data + MAC80211_3ADDR_LEN));
+	u8 category;
+
+	if (!ieee80211_is_action(fc))
+		return true;
+
+	category = *act;
+	act++;
+	switch (category) {
+	case ACT_CAT_BA:
+		switch (*act) {
+		case ACT_ADDBAREQ:
+			if (mac->act_scanning)
+				return false;
+
+			RT_TRACE(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG,
+				 ("%s ACT_ADDBAREQ From :" MAC_FMT "\n",
+				  is_tx ? "Tx" : "Rx", MAC_ARG(hdr->addr2)));
+			break;
+		case ACT_ADDBARSP:
+			RT_TRACE(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG,
+				 ("%s ACT_ADDBARSP From :" MAC_FMT "\n",
+				  is_tx ? "Tx" : "Rx", MAC_ARG(hdr->addr2)));
+			break;
+		case ACT_DELBA:
+			RT_TRACE(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG,
+				 ("ACT_ADDBADEL From :" MAC_FMT "\n",
+				  MAC_ARG(hdr->addr2)));
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return true;
+}
+
+/*should call before software enc*/
+u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u16 fc = le16_to_cpu(hdr->frame_control);
+	u16 ether_type;
+	u8 mac_hdr_len = ieee80211_get_hdrlen_from_skb(skb);
+	const struct iphdr *ip;
+
+	if (!ieee80211_is_data(fc))
+		goto end;
+
+	if (ieee80211_is_nullfunc(fc))
+		return true;
+
+	ip = (struct iphdr *)((u8 *) skb->data + mac_hdr_len +
+			      SNAP_SIZE + PROTOC_TYPE_SIZE);
+	ether_type = *(u16 *) ((u8 *) skb->data + mac_hdr_len + SNAP_SIZE);
+	ether_type = ntohs(ether_type);
+
+	if (ETH_P_IP == ether_type) {
+		if (IPPROTO_UDP == ip->protocol) {
+			struct udphdr *udp = (struct udphdr *)((u8 *) ip +
+							       (ip->ihl << 2));
+			if (((((u8 *) udp)[1] == 68) &&
+			     (((u8 *) udp)[3] == 67)) ||
+			    ((((u8 *) udp)[1] == 67) &&
+			     (((u8 *) udp)[3] == 68))) {
+				/*
+				 * 68 : UDP BOOTP client
+				 * 67 : UDP BOOTP server
+				 */
+				RT_TRACE(rtlpriv, (COMP_SEND | COMP_RECV),
+					 DBG_DMESG, ("dhcp %s !!\n",
+						     (is_tx) ? "Tx" : "Rx"));
+
+				if (is_tx) {
+					rtl_lps_leave(hw);
+					ppsc->last_delaylps_stamp_jiffies =
+					    jiffies;
+				}
+
+				return true;
+			}
+		}
+	} else if (ETH_P_ARP == ether_type) {
+		if (is_tx) {
+			rtl_lps_leave(hw);
+			ppsc->last_delaylps_stamp_jiffies = jiffies;
+		}
+
+		return true;
+	} else if (ETH_P_PAE == ether_type) {
+		RT_TRACE(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG,
+			 ("802.1X %s EAPOL pkt!!\n", (is_tx) ? "Tx" : "Rx"));
+
+		if (is_tx) {
+			rtl_lps_leave(hw);
+			ppsc->last_delaylps_stamp_jiffies = jiffies;
+		}
+
+		return true;
+	} else if (0x86DD == ether_type) {
+		return true;
+	}
+
+end:
+	return false;
+}
+
+/*********************************************************
+ *
+ * functions called by core.c
+ *
+ *********************************************************/
+int rtl_tx_agg_start(struct ieee80211_hw *hw, const u8 *ra, u16 tid, u16 *ssn)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_tid_data *tid_data;
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG,
+		 ("on ra = %pM tid = %d\n", ra, tid));
+
+	if (unlikely(tid >= MAX_TID_COUNT))
+		return -EINVAL;
+
+	if (mac->tids[tid].agg.agg_state != RTL_AGG_OFF) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("Start AGG when state is not RTL_AGG_OFF !\n"));
+		return -ENXIO;
+	}
+
+	tid_data = &mac->tids[tid];
+	*ssn = SEQ_TO_SN(tid_data->seq_number);
+
+	RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG,
+		 ("HW queue is empty tid:%d\n", tid));
+	tid_data->agg.agg_state = RTL_AGG_ON;
+
+	ieee80211_start_tx_ba_cb_irqsafe(mac->vif, ra, tid);
+
+	return 0;
+}
+
+int rtl_tx_agg_stop(struct ieee80211_hw *hw, const u8 * ra, u16 tid)
+{
+	int ssn = -1;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_tid_data *tid_data;
+
+	if (!ra) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("ra = NULL\n"));
+		return -EINVAL;
+	}
+
+	if (unlikely(tid >= MAX_TID_COUNT))
+		return -EINVAL;
+
+	if (mac->tids[tid].agg.agg_state != RTL_AGG_ON)
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("Stopping AGG while state not ON or starting\n"));
+
+	tid_data = &mac->tids[tid];
+	ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
+
+	mac->tids[tid].agg.agg_state = RTL_AGG_OFF;
+
+	ieee80211_stop_tx_ba_cb_irqsafe(mac->vif, ra, tid);
+
+	return 0;
+}
+
+/*********************************************************
+ *
+ * wq & timer callback functions
+ *
+ *********************************************************/
+void rtl_watchdog_wq_callback(void *data)
+{
+	struct rtl_works *rtlworks = container_of_dwork_rtl(data,
+							    struct rtl_works,
+							    watchdog_wq);
+	struct ieee80211_hw *hw = rtlworks->hw;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	bool b_busytraffic = false;
+	bool b_higher_busytraffic = false;
+	bool b_higher_busyrxtraffic = false;
+	bool b_higher_busytxtraffic = false;
+
+	u8 idx = 0;
+	u32 rx_cnt_inp4eriod = 0;
+	u32 tx_cnt_inp4eriod = 0;
+	u32 aver_rx_cnt_inperiod = 0;
+	u32 aver_tx_cnt_inperiod = 0;
+
+	bool benter_ps = false;
+
+	if (is_hal_stop(rtlhal))
+		return;
+
+	/* <1> Determine if action frame is allowed */
+	if (mac->link_state > MAC80211_NOLINK) {
+		if (mac->cnt_after_linked < 20)
+			mac->cnt_after_linked++;
+	} else {
+		mac->cnt_after_linked = 0;
+	}
+
+	/* <2> DM */
+	rtlpriv->cfg->ops->dm_watchdog(hw);
+
+	/*
+	 *<3> to check if traffic busy, if
+	 * busytraffic we don't change channel
+	 */
+	if (mac->link_state >= MAC80211_LINKED) {
+
+		/* (1) get aver_rx_cnt_inperiod & aver_tx_cnt_inperiod */
+		for (idx = 0; idx <= 2; idx++) {
+			rtlpriv->link_info.num_rx_in4period[idx] =
+			    rtlpriv->link_info.num_rx_in4period[idx + 1];
+			rtlpriv->link_info.num_tx_in4period[idx] =
+			    rtlpriv->link_info.num_tx_in4period[idx + 1];
+		}
+		rtlpriv->link_info.num_rx_in4period[3] =
+		    rtlpriv->link_info.num_rx_inperiod;
+		rtlpriv->link_info.num_tx_in4period[3] =
+		    rtlpriv->link_info.num_tx_inperiod;
+		for (idx = 0; idx <= 3; idx++) {
+			rx_cnt_inp4eriod +=
+			    rtlpriv->link_info.num_rx_in4period[idx];
+			tx_cnt_inp4eriod +=
+			    rtlpriv->link_info.num_tx_in4period[idx];
+		}
+		aver_rx_cnt_inperiod = rx_cnt_inp4eriod / 4;
+		aver_tx_cnt_inperiod = tx_cnt_inp4eriod / 4;
+
+		/* (2) check traffic busy */
+		if (aver_rx_cnt_inperiod > 100 || aver_tx_cnt_inperiod > 100)
+			b_busytraffic = true;
+
+		/* Higher Tx/Rx data. */
+		if (aver_rx_cnt_inperiod > 4000 ||
+		    aver_tx_cnt_inperiod > 4000) {
+			b_higher_busytraffic = true;
+
+			/* Extremely high Rx data. */
+			if (aver_rx_cnt_inperiod > 5000)
+				b_higher_busyrxtraffic = true;
+			else
+				b_higher_busytxtraffic = false;
+		}
+
+		if (((rtlpriv->link_info.num_rx_inperiod +
+		      rtlpriv->link_info.num_tx_inperiod) > 8) ||
+		    (rtlpriv->link_info.num_rx_inperiod > 2))
+			benter_ps = false;
+		else
+			benter_ps = true;
+
+		/* LeisurePS only work in infra mode. */
+		if (benter_ps)
+			rtl_lps_enter(hw);
+		else
+			rtl_lps_leave(hw);
+	}
+
+	rtlpriv->link_info.num_rx_inperiod = 0;
+	rtlpriv->link_info.num_tx_inperiod = 0;
+
+	rtlpriv->link_info.b_busytraffic = b_busytraffic;
+	rtlpriv->link_info.b_higher_busytraffic = b_higher_busytraffic;
+	rtlpriv->link_info.b_higher_busyrxtraffic = b_higher_busyrxtraffic;
+
+}
+
+void rtl_watch_dog_timer_callback(unsigned long data)
+{
+	struct ieee80211_hw *hw = (struct ieee80211_hw *)data;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	queue_delayed_work(rtlpriv->works.rtl_wq,
+			   &rtlpriv->works.watchdog_wq, 0);
+
+	mod_timer(&rtlpriv->works.watchdog_timer,
+		  jiffies + MSECS(RTL_WATCH_DOG_TIME));
+}
+
+/*********************************************************
+ *
+ * sysfs functions
+ *
+ *********************************************************/
+static ssize_t rtl_show_debug_level(struct device *d,
+				    struct device_attribute *attr, char *buf)
+{
+	struct ieee80211_hw *hw = dev_get_drvdata(d);
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	return sprintf(buf, "0x%08X\n", rtlpriv->dbg.global_debuglevel);
+}
+
+static ssize_t rtl_store_debug_level(struct device *d,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ieee80211_hw *hw = dev_get_drvdata(d);
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 0, &val);
+	if (ret) {
+		printk(KERN_DEBUG "%s is not in hex or decimal form.\n", buf);
+	} else {
+		rtlpriv->dbg.global_debuglevel = val;
+		printk(KERN_DEBUG "debuglevel:%x\n",
+		       rtlpriv->dbg.global_debuglevel);
+	}
+
+	return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
+		   rtl_show_debug_level, rtl_store_debug_level);
+
+static struct attribute *rtl_sysfs_entries[] = {
+
+	&dev_attr_debug_level.attr,
+
+	NULL
+};
+
+/*
+ * "name" is folder name witch will be
+ * put in device directory like :
+ * sys/devices/pci0000:00/0000:00:1c.4/
+ * 0000:06:00.0/rtl_sysfs
+ */
+struct attribute_group rtl_attribute_group = {
+	.name = "rtlsysfs",
+	.attrs = rtl_sysfs_entries,
+};
+
+MODULE_AUTHOR("lizhaoming	<chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger	<Larry.FInger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 802.11n PCI wireless core");
+
+static int __init rtl_core_module_init(void)
+{
+	return 0;
+}
+
+static void __exit rtl_core_module_exit(void)
+{
+}
+
+module_init(rtl_core_module_init);
+module_exit(rtl_core_module_exit);
diff --git a/drivers/net/wireless/rtlwifi/base.h b/drivers/net/wireless/rtlwifi/base.h
new file mode 100644
index 00000000000..3de5a14745f
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/base.h
@@ -0,0 +1,120 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *****************************************************************************/
+
+#ifndef __RTL_BASE_H__
+#define __RTL_BASE_H__
+
+#define RTL_DUMMY_OFFSET	0
+#define RTL_DUMMY_UNIT		8
+#define RTL_TX_DUMMY_SIZE	(RTL_DUMMY_OFFSET * RTL_DUMMY_UNIT)
+#define RTL_TX_DESC_SIZE	32
+#define RTL_TX_HEADER_SIZE	(RTL_TX_DESC_SIZE + RTL_TX_DUMMY_SIZE)
+
+#define HT_AMSDU_SIZE_4K	3839
+#define HT_AMSDU_SIZE_8K	7935
+
+#define MAX_BIT_RATE_40MHZ_MCS15	300	/* Mbps */
+#define MAX_BIT_RATE_40MHZ_MCS7		150	/* Mbps */
+
+#define RTL_RATE_COUNT_LEGACY		12
+#define RTL_CHANNEL_COUNT		14
+
+#define FRAME_OFFSET_FRAME_CONTROL	0
+#define FRAME_OFFSET_DURATION		2
+#define FRAME_OFFSET_ADDRESS1		4
+#define FRAME_OFFSET_ADDRESS2		10
+#define FRAME_OFFSET_ADDRESS3		16
+#define FRAME_OFFSET_SEQUENCE		22
+#define FRAME_OFFSET_ADDRESS4		24
+
+#define SET_80211_HDR_FRAME_CONTROL(_hdr, _val)		\
+	WRITEEF2BYTE(_hdr, _val)
+#define SET_80211_HDR_TYPE_AND_SUBTYPE(_hdr, _val)	\
+	WRITEEF1BYTE(_hdr, _val)
+#define SET_80211_HDR_PWR_MGNT(_hdr, _val)		\
+	SET_BITS_TO_LE_2BYTE(_hdr, 12, 1, _val)
+#define SET_80211_HDR_TO_DS(_hdr, _val)			\
+	SET_BITS_TO_LE_2BYTE(_hdr, 8, 1, _val)
+
+#define SET_80211_PS_POLL_AID(_hdr, _val)		\
+	WRITEEF2BYTE(((u8 *)(_hdr)) + 2, _val)
+#define SET_80211_PS_POLL_BSSID(_hdr, _val)		\
+	CP_MACADDR(((u8 *)(_hdr)) + 4, (u8 *)(_val))
+#define SET_80211_PS_POLL_TA(_hdr, _val)		\
+	CP_MACADDR(((u8 *)(_hdr)) + 10, (u8 *)(_val))
+
+#define SET_80211_HDR_DURATION(_hdr, _val)	\
+	WRITEEF2BYTE((u8 *)(_hdr)+FRAME_OFFSET_DURATION, _val)
+#define SET_80211_HDR_ADDRESS1(_hdr, _val)	\
+	CP_MACADDR((u8 *)(_hdr)+FRAME_OFFSET_ADDRESS1, (u8*)(_val))
+#define SET_80211_HDR_ADDRESS2(_hdr, _val)	\
+	CP_MACADDR((u8 *)(_hdr) + FRAME_OFFSET_ADDRESS2, (u8 *)(_val))
+#define SET_80211_HDR_ADDRESS3(_hdr, _val)	\
+	CP_MACADDR((u8 *)(_hdr)+FRAME_OFFSET_ADDRESS3, (u8 *)(_val))
+#define SET_80211_HDR_FRAGMENT_SEQUENCE(_hdr, _val)  \
+	WRITEEF2BYTE((u8 *)(_hdr)+FRAME_OFFSET_SEQUENCE, _val)
+
+#define SET_BEACON_PROBE_RSP_TIME_STAMP_LOW(__phdr, __val)	\
+	WRITEEF4BYTE(((u8 *)(__phdr)) + 24, __val)
+#define SET_BEACON_PROBE_RSP_TIME_STAMP_HIGH(__phdr, __val) \
+	WRITEEF4BYTE(((u8 *)(__phdr)) + 28, __val)
+#define SET_BEACON_PROBE_RSP_BEACON_INTERVAL(__phdr, __val) \
+	WRITEEF2BYTE(((u8 *)(__phdr)) + 32, __val)
+#define GET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr)	\
+	READEF2BYTE(((u8 *)(__phdr)) + 34)
+#define SET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, __val) \
+	WRITEEF2BYTE(((u8 *)(__phdr)) + 34, __val)
+#define MASK_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, __val) \
+	SET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr, \
+	(GET_BEACON_PROBE_RSP_CAPABILITY_INFO(__phdr) & (~(__val))))
+
+int rtl_init_core(struct ieee80211_hw *hw);
+void rtl_deinit_core(struct ieee80211_hw *hw);
+void rtl_init_rx_config(struct ieee80211_hw *hw);
+void rtl_init_rfkill(struct ieee80211_hw *hw);
+void rtl_deinit_rfkill(struct ieee80211_hw *hw);
+
+void rtl_watch_dog_timer_callback(unsigned long data);
+void rtl_deinit_deferred_work(struct ieee80211_hw *hw);
+
+bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx);
+bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb);
+u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx);
+
+void rtl_watch_dog_timer_callback(unsigned long data);
+int rtl_tx_agg_start(struct ieee80211_hw *hw, const u8 *ra,
+		     u16 tid, u16 *ssn);
+int rtl_tx_agg_stop(struct ieee80211_hw *hw, const u8 *ra, u16 tid);
+void rtl_watchdog_wq_callback(void *data);
+
+void rtl_get_tcb_desc(struct ieee80211_hw *hw,
+		      struct ieee80211_tx_info *info,
+		      struct sk_buff *skb, struct rtl_tcb_desc *tcb_desc);
+
+extern struct attribute_group rtl_attribute_group;
+#endif
diff --git a/drivers/net/wireless/rtlwifi/cam.c b/drivers/net/wireless/rtlwifi/cam.c
new file mode 100644
index 00000000000..52c9c1367ca
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/cam.c
@@ -0,0 +1,291 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "cam.h"
+
+void rtl_cam_reset_sec_info(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->sec.use_defaultkey = false;
+	rtlpriv->sec.pairwise_enc_algorithm = NO_ENCRYPTION;
+	rtlpriv->sec.group_enc_algorithm = NO_ENCRYPTION;
+	memset(rtlpriv->sec.key_buf, 0, KEY_BUF_SIZE * MAX_KEY_LEN);
+	memset(rtlpriv->sec.key_len, 0, KEY_BUF_SIZE);
+	rtlpriv->sec.pairwise_key = NULL;
+}
+
+static void rtl_cam_program_entry(struct ieee80211_hw *hw, u32 entry_no,
+			   u8 *mac_addr, u8 *key_cont_128, u16 us_config)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	u32 target_command;
+	u32 target_content = 0;
+	u8 entry_i;
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("key_cont_128:\n %x:%x:%x:%x:%x:%x\n",
+		  key_cont_128[0], key_cont_128[1],
+		  key_cont_128[2], key_cont_128[3],
+		  key_cont_128[4], key_cont_128[5]));
+
+	for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++) {
+		target_command = entry_i + CAM_CONTENT_COUNT * entry_no;
+		target_command = target_command | BIT(31) | BIT(16);
+
+		if (entry_i == 0) {
+			target_content = (u32) (*(mac_addr + 0)) << 16 |
+			    (u32) (*(mac_addr + 1)) << 24 | (u32) us_config;
+
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI],
+					target_content);
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
+					target_command);
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): "
+				  "WRITE %x: %x\n",
+				  rtlpriv->cfg->maps[WCAMI], target_content));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("The Key ID is %d\n", entry_no));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): "
+				  "WRITE %x: %x\n",
+				  rtlpriv->cfg->maps[RWCAM], target_command));
+
+		} else if (entry_i == 1) {
+
+			target_content = (u32) (*(mac_addr + 5)) << 24 |
+			    (u32) (*(mac_addr + 4)) << 16 |
+			    (u32) (*(mac_addr + 3)) << 8 |
+			    (u32) (*(mac_addr + 2));
+
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI],
+					target_content);
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
+					target_command);
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): WRITE A4: %x\n",
+				  target_content));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): WRITE A0: %x\n",
+				  target_command));
+
+		} else {
+
+			target_content =
+			    (u32) (*(key_cont_128 + (entry_i * 4 - 8) + 3)) <<
+			    24 | (u32) (*(key_cont_128 + (entry_i * 4 - 8) + 2))
+			    << 16 |
+			    (u32) (*(key_cont_128 + (entry_i * 4 - 8) + 1)) << 8
+			    | (u32) (*(key_cont_128 + (entry_i * 4 - 8) + 0));
+
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI],
+					target_content);
+			rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM],
+					target_command);
+			udelay(100);
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): WRITE A4: %x\n",
+				  target_content));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("rtl_cam_program_entry(): WRITE A0: %x\n",
+				  target_command));
+		}
+	}
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("after set key, usconfig:%x\n", us_config));
+}
+
+u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
+			 u32 ul_key_id, u32 ul_entry_idx, u32 ul_enc_alg,
+			 u32 ul_default_key, u8 *key_content)
+{
+	u32 us_config;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("EntryNo:%x, ulKeyId=%x, ulEncAlg=%x, "
+		  "ulUseDK=%x MacAddr" MAC_FMT "\n",
+		  ul_entry_idx, ul_key_id, ul_enc_alg,
+		  ul_default_key, MAC_ARG(mac_addr)));
+
+	if (ul_key_id == TOTAL_CAM_ENTRY) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("<=== ulKeyId exceed!\n"));
+		return 0;
+	}
+
+	if (ul_default_key == 1) {
+		us_config = CFG_VALID | ((u16) (ul_enc_alg) << 2);
+	} else {
+		us_config = CFG_VALID | ((ul_enc_alg) << 2) | ul_key_id;
+	}
+
+	rtl_cam_program_entry(hw, ul_entry_idx, mac_addr,
+			      (u8 *) key_content, us_config);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("<===\n"));
+
+	return 1;
+
+}
+EXPORT_SYMBOL(rtl_cam_add_one_entry);
+
+int rtl_cam_delete_one_entry(struct ieee80211_hw *hw,
+			     u8 *mac_addr, u32 ul_key_id)
+{
+	u32 ul_command;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("key_idx:%d\n", ul_key_id));
+
+	ul_command = ul_key_id * CAM_CONTENT_COUNT;
+	ul_command = ul_command | BIT(31) | BIT(16);
+
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], 0);
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("rtl_cam_delete_one_entry(): WRITE A4: %x\n", 0));
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("rtl_cam_delete_one_entry(): WRITE A0: %x\n", ul_command));
+
+	return 0;
+
+}
+EXPORT_SYMBOL(rtl_cam_delete_one_entry);
+
+void rtl_cam_reset_all_entry(struct ieee80211_hw *hw)
+{
+	u32 ul_command;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	ul_command = BIT(31) | BIT(30);
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+}
+EXPORT_SYMBOL(rtl_cam_reset_all_entry);
+
+void rtl_cam_mark_invalid(struct ieee80211_hw *hw, u8 uc_index)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	u32 ul_command;
+	u32 ul_content;
+	u32 ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_AES];
+
+	switch (rtlpriv->sec.pairwise_enc_algorithm) {
+	case WEP40_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_WEP40];
+		break;
+	case WEP104_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_WEP104];
+		break;
+	case TKIP_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_TKIP];
+		break;
+	case AESCCMP_ENCRYPTION:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_AES];
+		break;
+	default:
+		ul_enc_algo = rtlpriv->cfg->maps[SEC_CAM_AES];
+	}
+
+	ul_content = (uc_index & 3) | ((u16) (ul_enc_algo) << 2);
+
+	ul_content |= BIT(15);
+	ul_command = CAM_CONTENT_COUNT * uc_index;
+	ul_command = ul_command | BIT(31) | BIT(16);
+
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], ul_content);
+	rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("rtl_cam_mark_invalid(): WRITE A4: %x\n", ul_content));
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("rtl_cam_mark_invalid(): WRITE A0: %x\n", ul_command));
+}
+EXPORT_SYMBOL(rtl_cam_mark_invalid);
+
+void rtl_cam_empty_entry(struct ieee80211_hw *hw, u8 uc_index)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	u32 ul_command;
+	u32 ul_content;
+	u32 ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_AES];
+	u8 entry_i;
+
+	switch (rtlpriv->sec.pairwise_enc_algorithm) {
+	case WEP40_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_WEP40];
+		break;
+	case WEP104_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_WEP104];
+		break;
+	case TKIP_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_TKIP];
+		break;
+	case AESCCMP_ENCRYPTION:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_AES];
+		break;
+	default:
+		ul_encalgo = rtlpriv->cfg->maps[SEC_CAM_AES];
+	}
+
+	for (entry_i = 0; entry_i < CAM_CONTENT_COUNT; entry_i++) {
+
+		if (entry_i == 0) {
+			ul_content =
+			    (uc_index & 0x03) | ((u16) (ul_encalgo) << 2);
+			ul_content |= BIT(15);
+
+		} else {
+			ul_content = 0;
+		}
+
+		ul_command = CAM_CONTENT_COUNT * uc_index + entry_i;
+		ul_command = ul_command | BIT(31) | BIT(16);
+
+		rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], ul_content);
+		rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command);
+
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+			 ("rtl_cam_empty_entry(): WRITE A4: %x\n",
+			  ul_content));
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+			 ("rtl_cam_empty_entry(): WRITE A0: %x\n",
+			  ul_command));
+	}
+
+}
+EXPORT_SYMBOL(rtl_cam_empty_entry);
diff --git a/drivers/net/wireless/rtlwifi/cam.h b/drivers/net/wireless/rtlwifi/cam.h
new file mode 100644
index 00000000000..dd82f057d53
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/cam.h
@@ -0,0 +1,53 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_CAM_H_
+#define __RTL_CAM_H_
+
+#define TOTAL_CAM_ENTRY					32
+#define CAM_CONTENT_COUNT				8
+
+#define CFG_DEFAULT_KEY					BIT(5)
+#define CFG_VALID					BIT(15)
+
+#define PAIRWISE_KEYIDX					0
+#define CAM_PAIRWISE_KEY_POSITION		4
+
+#define	CAM_CONFIG_USEDK				1
+#define	CAM_CONFIG_NO_USEDK				0
+
+extern void rtl_cam_reset_all_entry(struct ieee80211_hw *hw);
+extern u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
+			u32 ul_key_id, u32 ul_entry_idx, u32 ul_enc_alg,
+			u32 ul_default_key, u8 *key_content);
+int rtl_cam_delete_one_entry(struct ieee80211_hw *hw, u8 *mac_addr,
+			u32 ul_key_id);
+void rtl_cam_mark_invalid(struct ieee80211_hw *hw, u8 uc_index);
+void rtl_cam_empty_entry(struct ieee80211_hw *hw, u8 uc_index);
+void rtl_cam_reset_sec_info(struct ieee80211_hw *hw);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
new file mode 100644
index 00000000000..d6a924a0565
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -0,0 +1,1029 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "core.h"
+#include "cam.h"
+#include "base.h"
+#include "ps.h"
+
+/*mutex for start & stop is must here. */
+static int rtl_op_start(struct ieee80211_hw *hw)
+{
+	int err = 0;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (!is_hal_stop(rtlhal))
+		return 0;
+	if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
+		return 0;
+	mutex_lock(&rtlpriv->locks.conf_mutex);
+	err = rtlpriv->intf_ops->adapter_start(hw);
+	if (err)
+		goto out;
+	rtl_watch_dog_timer_callback((unsigned long)hw);
+out:
+	mutex_unlock(&rtlpriv->locks.conf_mutex);
+	return err;
+}
+
+static void rtl_op_stop(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	if (is_hal_stop(rtlhal))
+		return;
+
+	if (unlikely(ppsc->rfpwr_state == ERFOFF)) {
+		rtl_ips_nic_on(hw);
+		mdelay(1);
+	}
+
+	mutex_lock(&rtlpriv->locks.conf_mutex);
+
+	mac->link_state = MAC80211_NOLINK;
+	memset(mac->bssid, 0, 6);
+
+	/*reset sec info */
+	rtl_cam_reset_sec_info(hw);
+
+	rtl_deinit_deferred_work(hw);
+	rtlpriv->intf_ops->adapter_stop(hw);
+
+	mutex_unlock(&rtlpriv->locks.conf_mutex);
+}
+
+static int rtl_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	if (unlikely(is_hal_stop(rtlhal) || ppsc->rfpwr_state != ERFON))
+		goto err_free;
+
+	if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
+		goto err_free;
+
+
+	rtlpriv->intf_ops->adapter_tx(hw, skb);
+
+	return NETDEV_TX_OK;
+
+err_free:
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
+}
+
+static int rtl_op_add_interface(struct ieee80211_hw *hw,
+		struct ieee80211_vif *vif)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	int err = 0;
+
+	if (mac->vif) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("vif has been set!! mac->vif = 0x%p\n", mac->vif));
+		return -EOPNOTSUPP;
+	}
+
+	rtl_ips_nic_on(hw);
+
+	mutex_lock(&rtlpriv->locks.conf_mutex);
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		if (mac->beacon_enabled == 1) {
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+				 ("NL80211_IFTYPE_STATION\n"));
+			mac->beacon_enabled = 0;
+			rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
+					rtlpriv->cfg->maps
+					[RTL_IBSS_INT_MASKS]);
+		}
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+			 ("NL80211_IFTYPE_ADHOC\n"));
+
+		mac->link_state = MAC80211_LINKED;
+		rtlpriv->cfg->ops->set_bcn_reg(hw);
+		break;
+	case NL80211_IFTYPE_AP:
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+			 ("NL80211_IFTYPE_AP\n"));
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("operation mode %d is not support!\n", vif->type));
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
+	mac->vif = vif;
+	mac->opmode = vif->type;
+	rtlpriv->cfg->ops->set_network_type(hw, vif->type);
+	memcpy(mac->mac_addr, vif->addr, ETH_ALEN);
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
+
+out:
+	mutex_unlock(&rtlpriv->locks.conf_mutex);
+	return err;
+}
+
+static void rtl_op_remove_interface(struct ieee80211_hw *hw,
+		struct ieee80211_vif *vif)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	mutex_lock(&rtlpriv->locks.conf_mutex);
+
+	/* Free beacon resources */
+	if ((mac->opmode == NL80211_IFTYPE_AP) ||
+	    (mac->opmode == NL80211_IFTYPE_ADHOC) ||
+	    (mac->opmode == NL80211_IFTYPE_MESH_POINT)) {
+		if (mac->beacon_enabled == 1) {
+			mac->beacon_enabled = 0;
+			rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
+					rtlpriv->cfg->maps
+					[RTL_IBSS_INT_MASKS]);
+		}
+	}
+
+	/*
+	 *Note: We assume NL80211_IFTYPE_UNSPECIFIED as
+	 *NO LINK for our hardware.
+	 */
+	mac->vif = NULL;
+	mac->link_state = MAC80211_NOLINK;
+	memset(mac->bssid, 0, 6);
+	mac->opmode = NL80211_IFTYPE_UNSPECIFIED;
+	rtlpriv->cfg->ops->set_network_type(hw, mac->opmode);
+
+	mutex_unlock(&rtlpriv->locks.conf_mutex);
+}
+
+
+static int rtl_op_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct ieee80211_conf *conf = &hw->conf;
+
+	mutex_lock(&rtlpriv->locks.conf_mutex);
+	if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {	/*BIT(2)*/
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+			 ("IEEE80211_CONF_CHANGE_LISTEN_INTERVAL\n"));
+	}
+
+	/*For IPS */
+	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+		if (hw->conf.flags & IEEE80211_CONF_IDLE)
+			rtl_ips_nic_off(hw);
+		else
+			rtl_ips_nic_on(hw);
+	} else {
+		/*
+		 *although rfoff may not cause by ips, but we will
+		 *check the reason in set_rf_power_state function
+		 */
+		if (unlikely(ppsc->rfpwr_state == ERFOFF))
+			rtl_ips_nic_on(hw);
+	}
+
+	/*For LPS */
+	if (changed & IEEE80211_CONF_CHANGE_PS) {
+		if (conf->flags & IEEE80211_CONF_PS)
+			rtl_lps_enter(hw);
+		else
+			rtl_lps_leave(hw);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) {
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+			 ("IEEE80211_CONF_CHANGE_RETRY_LIMITS %x\n",
+			  hw->conf.long_frame_max_tx_count));
+		mac->retry_long = hw->conf.long_frame_max_tx_count;
+		mac->retry_short = hw->conf.long_frame_max_tx_count;
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT,
+					      (u8 *) (&hw->conf.
+						      long_frame_max_tx_count));
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
+		struct ieee80211_channel *channel = hw->conf.channel;
+		u8 wide_chan = (u8) channel->hw_value;
+
+		/*
+		 *because we should back channel to
+		 *current_network.chan in in scanning,
+		 *So if set_chan == current_network.chan
+		 *we should set it.
+		 *because mac80211 tell us wrong bw40
+		 *info for cisco1253 bw20, so we modify
+		 *it here based on UPPER & LOWER
+		 */
+		switch (hw->conf.channel_type) {
+		case NL80211_CHAN_HT20:
+		case NL80211_CHAN_NO_HT:
+			/* SC */
+			mac->cur_40_prime_sc =
+			    PRIME_CHNL_OFFSET_DONT_CARE;
+			rtlphy->current_chan_bw = HT_CHANNEL_WIDTH_20;
+			mac->bw_40 = false;
+			break;
+		case NL80211_CHAN_HT40MINUS:
+			/* SC */
+			mac->cur_40_prime_sc = PRIME_CHNL_OFFSET_UPPER;
+			rtlphy->current_chan_bw =
+			    HT_CHANNEL_WIDTH_20_40;
+			mac->bw_40 = true;
+
+			/*wide channel */
+			wide_chan -= 2;
+
+			break;
+		case NL80211_CHAN_HT40PLUS:
+			/* SC */
+			mac->cur_40_prime_sc = PRIME_CHNL_OFFSET_LOWER;
+			rtlphy->current_chan_bw =
+			    HT_CHANNEL_WIDTH_20_40;
+			mac->bw_40 = true;
+
+			/*wide channel */
+			wide_chan += 2;
+
+			break;
+		default:
+			mac->bw_40 = false;
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("switch case not processed\n"));
+			break;
+		}
+
+		if (wide_chan <= 0)
+			wide_chan = 1;
+		rtlphy->current_channel = wide_chan;
+
+		rtlpriv->cfg->ops->set_channel_access(hw);
+		rtlpriv->cfg->ops->switch_channel(hw);
+		rtlpriv->cfg->ops->set_bw_mode(hw,
+					       hw->conf.channel_type);
+	}
+
+	mutex_unlock(&rtlpriv->locks.conf_mutex);
+
+	return 0;
+}
+
+static void rtl_op_configure_filter(struct ieee80211_hw *hw,
+			     unsigned int changed_flags,
+			     unsigned int *new_flags, u64 multicast)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	*new_flags &= RTL_SUPPORTED_FILTERS;
+	if (!changed_flags)
+		return;
+
+	/*TODO: we disable broadcase now, so enable here */
+	if (changed_flags & FIF_ALLMULTI) {
+		if (*new_flags & FIF_ALLMULTI) {
+			mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AM] |
+			    rtlpriv->cfg->maps[MAC_RCR_AB];
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+				 ("Enable receive multicast frame.\n"));
+		} else {
+			mac->rx_conf &= ~(rtlpriv->cfg->maps[MAC_RCR_AM] |
+					  rtlpriv->cfg->maps[MAC_RCR_AB]);
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+				 ("Disable receive multicast frame.\n"));
+		}
+	}
+
+	if (changed_flags & FIF_FCSFAIL) {
+		if (*new_flags & FIF_FCSFAIL) {
+			mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACRC32];
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+				 ("Enable receive FCS error frame.\n"));
+		} else {
+			mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACRC32];
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+				 ("Disable receive FCS error frame.\n"));
+		}
+	}
+
+	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
+		/*
+		 *TODO: BIT(5) is probe response BIT(8) is beacon
+		 *TODO: Use define for BIT(5) and BIT(8)
+		 */
+		if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
+			mac->rx_mgt_filter |= (BIT(5) | BIT(8));
+		else
+			mac->rx_mgt_filter &= ~(BIT(5) | BIT(8));
+	}
+
+	if (changed_flags & FIF_CONTROL) {
+		if (*new_flags & FIF_CONTROL) {
+			mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACF];
+			mac->rx_ctrl_filter |= RTL_SUPPORTED_CTRL_FILTER;
+
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+				 ("Enable receive control frame.\n"));
+		} else {
+			mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACF];
+			mac->rx_ctrl_filter &= ~RTL_SUPPORTED_CTRL_FILTER;
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+				 ("Disable receive control frame.\n"));
+		}
+	}
+
+	if (changed_flags & FIF_OTHER_BSS) {
+		if (*new_flags & FIF_OTHER_BSS) {
+			mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AAP];
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+				 ("Enable receive other BSS's frame.\n"));
+		} else {
+			mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_AAP];
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+				 ("Disable receive other BSS's frame.\n"));
+		}
+	}
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR, (u8 *) (&mac->rx_conf));
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MGT_FILTER,
+				      (u8 *) (&mac->rx_mgt_filter));
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_CTRL_FILTER,
+				      (u8 *) (&mac->rx_ctrl_filter));
+}
+
+static int _rtl_get_hal_qnum(u16 queue)
+{
+	int qnum;
+
+	switch (queue) {
+	case 0:
+		qnum = AC3_VO;
+		break;
+	case 1:
+		qnum = AC2_VI;
+		break;
+	case 2:
+		qnum = AC0_BE;
+		break;
+	case 3:
+		qnum = AC1_BK;
+		break;
+	default:
+		qnum = AC0_BE;
+		break;
+	}
+	return qnum;
+}
+
+/*
+ *for mac80211 VO=0, VI=1, BE=2, BK=3
+ *for rtl819x  BE=0, BK=1, VI=2, VO=3
+ */
+static int rtl_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
+		   const struct ieee80211_tx_queue_params *param)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	int aci;
+
+	if (queue >= AC_MAX) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("queue number %d is incorrect!\n", queue));
+		return -EINVAL;
+	}
+
+	aci = _rtl_get_hal_qnum(queue);
+	mac->ac[aci].aifs = param->aifs;
+	mac->ac[aci].cw_min = param->cw_min;
+	mac->ac[aci].cw_max = param->cw_max;
+	mac->ac[aci].tx_op = param->txop;
+	memcpy(&mac->edca_param[aci], param, sizeof(*param));
+	rtlpriv->cfg->ops->set_qos(hw, aci);
+	return 0;
+}
+
+static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
+			     struct ieee80211_bss_conf *bss_conf, u32 changed)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	mutex_lock(&rtlpriv->locks.conf_mutex);
+
+	if ((vif->type == NL80211_IFTYPE_ADHOC) ||
+	    (vif->type == NL80211_IFTYPE_AP) ||
+	    (vif->type == NL80211_IFTYPE_MESH_POINT)) {
+
+		if ((changed & BSS_CHANGED_BEACON) ||
+		    (changed & BSS_CHANGED_BEACON_ENABLED &&
+		     bss_conf->enable_beacon)) {
+
+			if (mac->beacon_enabled == 0) {
+				RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
+					 ("BSS_CHANGED_BEACON_ENABLED\n"));
+
+				/*start hw beacon interrupt. */
+				/*rtlpriv->cfg->ops->set_bcn_reg(hw); */
+				mac->beacon_enabled = 1;
+				rtlpriv->cfg->ops->update_interrupt_mask(hw,
+						rtlpriv->cfg->maps
+						[RTL_IBSS_INT_MASKS],
+						0);
+			}
+		} else {
+			if (mac->beacon_enabled == 1) {
+				RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
+					 ("ADHOC DISABLE BEACON\n"));
+
+				mac->beacon_enabled = 0;
+				rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
+						rtlpriv->cfg->maps
+						[RTL_IBSS_INT_MASKS]);
+			}
+		}
+
+		if (changed & BSS_CHANGED_BEACON_INT) {
+			RT_TRACE(rtlpriv, COMP_BEACON, DBG_TRACE,
+				 ("BSS_CHANGED_BEACON_INT\n"));
+			mac->beacon_interval = bss_conf->beacon_int;
+			rtlpriv->cfg->ops->set_bcn_intv(hw);
+		}
+	}
+
+	/*TODO: reference to enum ieee80211_bss_change */
+	if (changed & BSS_CHANGED_ASSOC) {
+		if (bss_conf->assoc) {
+			mac->link_state = MAC80211_LINKED;
+			mac->cnt_after_linked = 0;
+			mac->assoc_id = bss_conf->aid;
+			memcpy(mac->bssid, bss_conf->bssid, 6);
+
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
+				 ("BSS_CHANGED_ASSOC\n"));
+		} else {
+			if (mac->link_state == MAC80211_LINKED)
+				rtl_lps_leave(hw);
+
+			mac->link_state = MAC80211_NOLINK;
+			memset(mac->bssid, 0, 6);
+
+			/* reset sec info */
+			rtl_cam_reset_sec_info(hw);
+
+			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
+				 ("BSS_CHANGED_UN_ASSOC\n"));
+		}
+	}
+
+	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
+			 ("BSS_CHANGED_ERP_CTS_PROT\n"));
+		mac->use_cts_protect = bss_conf->use_cts_prot;
+	}
+
+	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+			 ("BSS_CHANGED_ERP_PREAMBLE use short preamble:%x\n",
+			  bss_conf->use_short_preamble));
+
+		mac->short_preamble = bss_conf->use_short_preamble;
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACK_PREAMBLE,
+					      (u8 *) (&mac->short_preamble));
+	}
+
+	if (changed & BSS_CHANGED_ERP_SLOT) {
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
+			 ("BSS_CHANGED_ERP_SLOT\n"));
+
+		if (bss_conf->use_short_slot)
+			mac->slot_time = RTL_SLOT_TIME_9;
+		else
+			mac->slot_time = RTL_SLOT_TIME_20;
+
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
+					      (u8 *) (&mac->slot_time));
+	}
+
+	if (changed & BSS_CHANGED_HT) {
+		struct ieee80211_sta *sta = NULL;
+
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
+			 ("BSS_CHANGED_HT\n"));
+
+		sta = ieee80211_find_sta(mac->vif, mac->bssid);
+
+		if (sta) {
+			if (sta->ht_cap.ampdu_density >
+			    mac->current_ampdu_density)
+				mac->current_ampdu_density =
+				    sta->ht_cap.ampdu_density;
+			if (sta->ht_cap.ampdu_factor <
+			    mac->current_ampdu_factor)
+				mac->current_ampdu_factor =
+				    sta->ht_cap.ampdu_factor;
+		}
+
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SHORTGI_DENSITY,
+					      (u8 *) (&mac->max_mss_density));
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AMPDU_FACTOR,
+					      &mac->current_ampdu_factor);
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AMPDU_MIN_SPACE,
+					      &mac->current_ampdu_density);
+	}
+
+	if (changed & BSS_CHANGED_BSSID) {
+		struct ieee80211_sta *sta = NULL;
+		u32 basic_rates;
+		u8 i;
+
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BSSID,
+					      (u8 *) bss_conf->bssid);
+
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
+			 (MAC_FMT "\n", MAC_ARG(bss_conf->bssid)));
+
+		memcpy(mac->bssid, bss_conf->bssid, 6);
+		if (is_valid_ether_addr(bss_conf->bssid)) {
+			switch (vif->type) {
+			case NL80211_IFTYPE_UNSPECIFIED:
+				break;
+			case NL80211_IFTYPE_ADHOC:
+				break;
+			case NL80211_IFTYPE_STATION:
+				break;
+			case NL80211_IFTYPE_AP:
+				break;
+			default:
+				RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+					 ("switch case not process\n"));
+				break;
+			}
+			rtlpriv->cfg->ops->set_network_type(hw, vif->type);
+		} else
+			rtlpriv->cfg->ops->set_network_type(hw,
+					NL80211_IFTYPE_UNSPECIFIED);
+
+		memset(mac->mcs, 0, 16);
+		mac->ht_enable = false;
+		mac->sgi_40 = false;
+		mac->sgi_20 = false;
+
+		if (!bss_conf->use_short_slot)
+			mac->mode = WIRELESS_MODE_B;
+		else
+			mac->mode = WIRELESS_MODE_G;
+
+		sta = ieee80211_find_sta(mac->vif, mac->bssid);
+
+		if (sta) {
+			if (sta->ht_cap.ht_supported) {
+				mac->mode = WIRELESS_MODE_N_24G;
+				mac->ht_enable = true;
+			}
+
+			if (mac->ht_enable) {
+				u16 ht_cap = sta->ht_cap.cap;
+				memcpy(mac->mcs, (u8 *) (&sta->ht_cap.mcs), 16);
+
+				for (i = 0; i < 16; i++)
+					RT_TRACE(rtlpriv, COMP_MAC80211,
+						 DBG_LOUD, ("%x ",
+							    mac->mcs[i]));
+				RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
+					 ("\n"));
+
+				if (ht_cap & IEEE80211_HT_CAP_SGI_40)
+					mac->sgi_40 = true;
+
+				if (ht_cap & IEEE80211_HT_CAP_SGI_20)
+					mac->sgi_20 = true;
+
+				/*
+				 * for cisco 1252 bw20 it's wrong
+				 * if (ht_cap &
+				 *     IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
+				 *	mac->bw_40 = true;
+				 * }
+				 */
+			}
+		}
+
+		/*mac80211 just give us CCK rates any time
+		 *So we add G rate in basic rates when
+		 not in B mode*/
+		if (changed & BSS_CHANGED_BASIC_RATES) {
+			if (mac->mode == WIRELESS_MODE_B)
+				basic_rates = bss_conf->basic_rates | 0x00f;
+			else
+				basic_rates = bss_conf->basic_rates | 0xff0;
+
+			if (!vif)
+				goto out;
+
+			mac->basic_rates = basic_rates;
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
+					(u8 *) (&basic_rates));
+
+			if (rtlpriv->dm.b_useramask)
+				rtlpriv->cfg->ops->update_rate_mask(hw, 0);
+			else
+				rtlpriv->cfg->ops->update_rate_table(hw);
+
+		}
+	}
+
+	/*
+	 * For FW LPS:
+	 * To tell firmware we have connected
+	 * to an AP. For 92SE/CE power save v2.
+	 */
+	if (changed & BSS_CHANGED_ASSOC) {
+		if (bss_conf->assoc) {
+			if (ppsc->b_fwctrl_lps) {
+				u8 mstatus = RT_MEDIA_CONNECT;
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						      HW_VAR_H2C_FW_JOINBSSRPT,
+						      (u8 *) (&mstatus));
+				ppsc->report_linked = true;
+			}
+		} else {
+			if (ppsc->b_fwctrl_lps) {
+				u8 mstatus = RT_MEDIA_DISCONNECT;
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						      HW_VAR_H2C_FW_JOINBSSRPT,
+						      (u8 *)(&mstatus));
+				ppsc->report_linked = false;
+			}
+		}
+	}
+
+out:
+	mutex_unlock(&rtlpriv->locks.conf_mutex);
+}
+
+static u64 rtl_op_get_tsf(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u64 tsf;
+
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_CORRECT_TSF, (u8 *) (&tsf));
+	return tsf;
+}
+
+static void rtl_op_set_tsf(struct ieee80211_hw *hw, u64 tsf)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0;;
+
+	mac->tsf = tsf;
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_CORRECT_TSF, (u8 *) (&bibss));
+}
+
+static void rtl_op_reset_tsf(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 tmp = 0;
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_DUAL_TSF_RST, (u8 *) (&tmp));
+}
+
+static void rtl_op_sta_notify(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
+			      enum sta_notify_cmd cmd,
+			      struct ieee80211_sta *sta)
+{
+	switch (cmd) {
+	case STA_NOTIFY_SLEEP:
+		break;
+	case STA_NOTIFY_AWAKE:
+		break;
+	default:
+		break;
+	}
+}
+
+static int rtl_op_ampdu_action(struct ieee80211_hw *hw,
+			       struct ieee80211_vif *vif,
+			       enum ieee80211_ampdu_mlme_action action,
+			       struct ieee80211_sta *sta, u16 tid, u16 * ssn)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	switch (action) {
+	case IEEE80211_AMPDU_TX_START:
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
+			 ("IEEE80211_AMPDU_TX_START: TID:%d\n", tid));
+		return rtl_tx_agg_start(hw, sta->addr, tid, ssn);
+		break;
+	case IEEE80211_AMPDU_TX_STOP:
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
+			 ("IEEE80211_AMPDU_TX_STOP: TID:%d\n", tid));
+		return rtl_tx_agg_stop(hw, sta->addr, tid);
+		break;
+	case IEEE80211_AMPDU_TX_OPERATIONAL:
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
+			 ("IEEE80211_AMPDU_TX_OPERATIONAL:TID:%d\n", tid));
+		break;
+	case IEEE80211_AMPDU_RX_START:
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
+			 ("IEEE80211_AMPDU_RX_START:TID:%d\n", tid));
+		break;
+	case IEEE80211_AMPDU_RX_STOP:
+		RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
+			 ("IEEE80211_AMPDU_RX_STOP:TID:%d\n", tid));
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("IEEE80211_AMPDU_ERR!!!!:\n"));
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static void rtl_op_sw_scan_start(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	mac->act_scanning = true;
+
+	RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, ("\n"));
+
+	if (mac->link_state == MAC80211_LINKED) {
+		rtl_lps_leave(hw);
+		mac->link_state = MAC80211_LINKED_SCANNING;
+	} else
+		rtl_ips_nic_on(hw);
+
+	rtlpriv->cfg->ops->led_control(hw, LED_CTL_SITE_SURVEY);
+	rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_BACKUP);
+}
+
+static void rtl_op_sw_scan_complete(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, ("\n"));
+
+	rtlpriv->cfg->ops->scan_operation_backup(hw, SCAN_OPT_RESTORE);
+	mac->act_scanning = false;
+	if (mac->link_state == MAC80211_LINKED_SCANNING) {
+		mac->link_state = MAC80211_LINKED;
+
+		/* fix fwlps issue */
+		rtlpriv->cfg->ops->set_network_type(hw, mac->opmode);
+
+		if (rtlpriv->dm.b_useramask)
+			rtlpriv->cfg->ops->update_rate_mask(hw, 0);
+		else
+			rtlpriv->cfg->ops->update_rate_table(hw);
+
+	}
+
+}
+
+static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+			  struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+			  struct ieee80211_key_conf *key)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u8 key_type = NO_ENCRYPTION;
+	u8 key_idx;
+	bool group_key = false;
+	bool wep_only = false;
+	int err = 0;
+	u8 mac_addr[ETH_ALEN];
+	u8 bcast_addr[ETH_ALEN] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
+	u8 zero_addr[ETH_ALEN] = { 0 };
+
+	if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("not open hw encryption\n"));
+		return -ENOSPC;	/*User disabled HW-crypto */
+	}
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+		 ("%s hardware based encryption for keyidx: %d, mac: %pM\n",
+		  cmd == SET_KEY ? "Using" : "Disabling", key->keyidx,
+		  sta ? sta->addr : bcast_addr));
+	rtlpriv->sec.being_setkey = true;
+	rtl_ips_nic_on(hw);
+	mutex_lock(&rtlpriv->locks.conf_mutex);
+	/* <1> get encryption alg */
+	switch (key->cipher) {
+	case WLAN_CIPHER_SUITE_WEP40:
+		key_type = WEP40_ENCRYPTION;
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("alg:WEP40\n"));
+		rtlpriv->sec.use_defaultkey = true;
+		break;
+	case WLAN_CIPHER_SUITE_WEP104:
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+			 ("alg:WEP104\n"));
+		key_type = WEP104_ENCRYPTION;
+		rtlpriv->sec.use_defaultkey = true;
+		break;
+	case WLAN_CIPHER_SUITE_TKIP:
+		key_type = TKIP_ENCRYPTION;
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("alg:TKIP\n"));
+		if (mac->opmode == NL80211_IFTYPE_ADHOC)
+			rtlpriv->sec.use_defaultkey = true;
+		break;
+	case WLAN_CIPHER_SUITE_CCMP:
+		key_type = AESCCMP_ENCRYPTION;
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("alg:CCMP\n"));
+		if (mac->opmode == NL80211_IFTYPE_ADHOC)
+			rtlpriv->sec.use_defaultkey = true;
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("alg_err:%x!!!!:\n", key->cipher));
+		goto out_unlock;
+	}
+	/* <2> get key_idx */
+	key_idx = (u8) (key->keyidx);
+	if (key_idx > 3)
+		goto out_unlock;
+	/* <3> if pairwise key enable_hw_sec */
+	group_key = !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE);
+	if ((!group_key) || (mac->opmode == NL80211_IFTYPE_ADHOC) ||
+	    rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION) {
+		if (rtlpriv->sec.pairwise_enc_algorithm == NO_ENCRYPTION &&
+		    (key_type == WEP40_ENCRYPTION ||
+		     key_type == WEP104_ENCRYPTION))
+			wep_only = true;
+		rtlpriv->sec.pairwise_enc_algorithm = key_type;
+		rtlpriv->cfg->ops->enable_hw_sec(hw);
+	}
+	/* <4> set key based on cmd */
+	switch (cmd) {
+	case SET_KEY:
+		if (wep_only) {
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("set WEP(group/pairwise) key\n"));
+			/* Pairwise key with an assigned MAC address. */
+			rtlpriv->sec.pairwise_enc_algorithm = key_type;
+			rtlpriv->sec.group_enc_algorithm = key_type;
+			/*set local buf about wep key. */
+			memcpy(rtlpriv->sec.key_buf[key_idx],
+			       key->key, key->keylen);
+			rtlpriv->sec.key_len[key_idx] = key->keylen;
+			memcpy(mac_addr, zero_addr, ETH_ALEN);
+		} else if (group_key) {	/* group key */
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("set group key\n"));
+			/* group key */
+			rtlpriv->sec.group_enc_algorithm = key_type;
+			/*set local buf about group key. */
+			memcpy(rtlpriv->sec.key_buf[key_idx],
+			       key->key, key->keylen);
+			rtlpriv->sec.key_len[key_idx] = key->keylen;
+			memcpy(mac_addr, bcast_addr, ETH_ALEN);
+		} else {	/* pairwise key */
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("set pairwise key\n"));
+			if (!sta) {
+				RT_ASSERT(false, ("pairwise key withnot"
+						  "mac_addr\n"));
+				err = -EOPNOTSUPP;
+				goto out_unlock;
+			}
+			/* Pairwise key with an assigned MAC address. */
+			rtlpriv->sec.pairwise_enc_algorithm = key_type;
+			/*set local buf about pairwise key. */
+			memcpy(rtlpriv->sec.key_buf[PAIRWISE_KEYIDX],
+			       key->key, key->keylen);
+			rtlpriv->sec.key_len[PAIRWISE_KEYIDX] = key->keylen;
+			rtlpriv->sec.pairwise_key =
+			    rtlpriv->sec.key_buf[PAIRWISE_KEYIDX];
+			memcpy(mac_addr, sta->addr, ETH_ALEN);
+		}
+		rtlpriv->cfg->ops->set_key(hw, key_idx, mac_addr,
+					   group_key, key_type, wep_only,
+					   false);
+		/* <5> tell mac80211 do something: */
+		/*must use sw generate IV, or can not work !!!!. */
+		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+		key->hw_key_idx = key_idx;
+		if (key_type == TKIP_ENCRYPTION)
+			key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+		break;
+	case DISABLE_KEY:
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+			 ("disable key delete one entry\n"));
+		/*set local buf about wep key. */
+		memset(rtlpriv->sec.key_buf[key_idx], 0, key->keylen);
+		rtlpriv->sec.key_len[key_idx] = 0;
+		memcpy(mac_addr, zero_addr, ETH_ALEN);
+		/*
+		 *mac80211 will delete entrys one by one,
+		 *so don't use rtl_cam_reset_all_entry
+		 *or clear all entry here.
+		 */
+		rtl_cam_delete_one_entry(hw, mac_addr, key_idx);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("cmd_err:%x!!!!:\n", cmd));
+	}
+out_unlock:
+	mutex_unlock(&rtlpriv->locks.conf_mutex);
+	rtlpriv->sec.being_setkey = false;
+	return err;
+}
+
+static void rtl_op_rfkill_poll(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	bool radio_state;
+	bool blocked;
+	u8 valid = 0;
+
+	if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status))
+		return;
+
+	mutex_lock(&rtlpriv->locks.conf_mutex);
+
+	/*if Radio On return true here */
+	radio_state = rtlpriv->cfg->ops->radio_onoff_checking(hw, &valid);
+
+	if (valid) {
+		if (unlikely(radio_state != rtlpriv->rfkill.rfkill_state)) {
+			rtlpriv->rfkill.rfkill_state = radio_state;
+
+			RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+				 (KERN_INFO "wireless radio switch turned %s\n",
+				  radio_state ? "on" : "off"));
+
+			blocked = (rtlpriv->rfkill.rfkill_state == 1) ? 0 : 1;
+			wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
+		}
+	}
+
+	mutex_unlock(&rtlpriv->locks.conf_mutex);
+}
+
+const struct ieee80211_ops rtl_ops = {
+	.start = rtl_op_start,
+	.stop = rtl_op_stop,
+	.tx = rtl_op_tx,
+	.add_interface = rtl_op_add_interface,
+	.remove_interface = rtl_op_remove_interface,
+	.config = rtl_op_config,
+	.configure_filter = rtl_op_configure_filter,
+	.set_key = rtl_op_set_key,
+	.conf_tx = rtl_op_conf_tx,
+	.bss_info_changed = rtl_op_bss_info_changed,
+	.get_tsf = rtl_op_get_tsf,
+	.set_tsf = rtl_op_set_tsf,
+	.reset_tsf = rtl_op_reset_tsf,
+	.sta_notify = rtl_op_sta_notify,
+	.ampdu_action = rtl_op_ampdu_action,
+	.sw_scan_start = rtl_op_sw_scan_start,
+	.sw_scan_complete = rtl_op_sw_scan_complete,
+	.rfkill_poll = rtl_op_rfkill_poll,
+};
diff --git a/drivers/net/wireless/rtlwifi/core.h b/drivers/net/wireless/rtlwifi/core.h
new file mode 100644
index 00000000000..0ef31c3c619
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/core.h
@@ -0,0 +1,42 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * Tmis program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * Tme full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *****************************************************************************/
+
+#ifndef __RTL_CORE_H__
+#define __RTL_CORE_H__
+
+#define RTL_SUPPORTED_FILTERS		\
+	(FIF_PROMISC_IN_BSS | \
+	FIF_ALLMULTI | FIF_CONTROL | \
+	FIF_OTHER_BSS | \
+	FIF_FCSFAIL | \
+	FIF_BCN_PRBRESP_PROMISC)
+
+#define RTL_SUPPORTED_CTRL_FILTER	0xFF
+
+extern const struct ieee80211_ops rtl_ops;
+#endif
diff --git a/drivers/net/wireless/rtlwifi/debug.c b/drivers/net/wireless/rtlwifi/debug.c
new file mode 100644
index 00000000000..5fa73852cb6
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/debug.c
@@ -0,0 +1,50 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * Tmis program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * Tme full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *****************************************************************************/
+
+#include "wifi.h"
+
+void rtl_dbgp_flag_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 i;
+
+	rtlpriv->dbg.global_debuglevel = DBG_EMERG;
+
+	rtlpriv->dbg.global_debugcomponents =
+	    COMP_ERR | COMP_FW | COMP_INIT | COMP_RECV | COMP_SEND |
+	    COMP_MLME | COMP_SCAN | COMP_INTR | COMP_LED | COMP_SEC |
+	    COMP_BEACON | COMP_RATE | COMP_RXDESC | COMP_DIG | COMP_TXAGC |
+	    COMP_POWER | COMP_POWER_TRACKING | COMP_BB_POWERSAVING | COMP_SWAS |
+	    COMP_RF | COMP_TURBO | COMP_RATR | COMP_CMD |
+	    COMP_EFUSE | COMP_QOS | COMP_MAC80211 | COMP_REGD | COMP_CHAN;
+
+	for (i = 0; i < DBGP_TYPE_MAX; i++)
+		rtlpriv->dbg.dbgp_type[i] = 0;
+
+	/*Init Debug flag enable condition */
+}
diff --git a/drivers/net/wireless/rtlwifi/debug.h b/drivers/net/wireless/rtlwifi/debug.h
new file mode 100644
index 00000000000..08bdec2ceda
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/debug.h
@@ -0,0 +1,212 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * Tmis program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * Tme full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *****************************************************************************/
+
+#ifndef __RTL_DEBUG_H__
+#define __RTL_DEBUG_H__
+
+/*--------------------------------------------------------------
+			Debug level
+--------------------------------------------------------------*/
+/*
+ *Fatal bug.
+ *For example, Tx/Rx/IO locked up,
+ *memory access violation,
+ *resource allocation failed,
+ *unexpected HW behavior, HW BUG
+ *and so on.
+ */
+#define DBG_EMERG			0
+
+/*
+ *Abnormal, rare, or unexpeted cases.
+ *For example, Packet/IO Ctl canceled,
+ *device suprisely unremoved and so on.
+ */
+#define	DBG_WARNING			2
+
+/*
+ *Normal case driver developer should
+ *open, we can see link status like
+ *assoc/AddBA/DHCP/adapter start and
+ *so on basic and useful infromations.
+ */
+#define DBG_DMESG			3
+
+/*
+ *Normal case with useful information
+ *about current SW or HW state.
+ *For example, Tx/Rx descriptor to fill,
+ *Tx/Rx descriptor completed status,
+ *SW protocol state change, dynamic
+ *mechanism state change and so on.
+ */
+#define DBG_LOUD			4
+
+/*
+ *Normal case with detail execution
+ *flow or information.
+ */
+#define	DBG_TRACE			5
+
+/*--------------------------------------------------------------
+		Define the rt_trace components
+--------------------------------------------------------------*/
+#define COMP_ERR			BIT(0)
+#define COMP_FW				BIT(1)
+#define COMP_INIT			BIT(2)	/*For init/deinit */
+#define COMP_RECV			BIT(3)	/*For Rx. */
+#define COMP_SEND			BIT(4)	/*For Tx. */
+#define COMP_MLME			BIT(5)	/*For MLME. */
+#define COMP_SCAN			BIT(6)	/*For Scan. */
+#define COMP_INTR			BIT(7)	/*For interrupt Related. */
+#define COMP_LED			BIT(8)	/*For LED. */
+#define COMP_SEC			BIT(9)	/*For sec. */
+#define COMP_BEACON			BIT(10)	/*For beacon. */
+#define COMP_RATE			BIT(11)	/*For rate. */
+#define COMP_RXDESC			BIT(12)	/*For rx desc. */
+#define COMP_DIG			BIT(13)	/*For DIG */
+#define COMP_TXAGC			BIT(14)	/*For Tx power */
+#define COMP_HIPWR			BIT(15)	/*For High Power Mechanism */
+#define COMP_POWER			BIT(16)	/*For lps/ips/aspm. */
+#define COMP_POWER_TRACKING	BIT(17)	/*For TX POWER TRACKING */
+#define COMP_BB_POWERSAVING	BIT(18)
+#define COMP_SWAS			BIT(19)	/*For SW Antenna Switch */
+#define COMP_RF				BIT(20)	/*For RF. */
+#define COMP_TURBO			BIT(21)	/*For EDCA TURBO. */
+#define COMP_RATR			BIT(22)
+#define COMP_CMD			BIT(23)
+#define COMP_EFUSE			BIT(24)
+#define COMP_QOS			BIT(25)
+#define COMP_MAC80211		BIT(26)
+#define COMP_REGD			BIT(27)
+#define COMP_CHAN			BIT(28)
+
+/*--------------------------------------------------------------
+		Define the rt_print components
+--------------------------------------------------------------*/
+/* Define EEPROM and EFUSE  check module bit*/
+#define EEPROM_W			BIT(0)
+#define EFUSE_PG			BIT(1)
+#define EFUSE_READ_ALL		BIT(2)
+
+/* Define init check for module bit*/
+#define	INIT_EEPROM			BIT(0)
+#define	INIT_TxPower		BIT(1)
+#define	INIT_IQK			BIT(2)
+#define	INIT_RF				BIT(3)
+
+/* Define PHY-BB/RF/MAC check module bit */
+#define	PHY_BBR				BIT(0)
+#define	PHY_BBW				BIT(1)
+#define	PHY_RFR				BIT(2)
+#define	PHY_RFW				BIT(3)
+#define	PHY_MACR			BIT(4)
+#define	PHY_MACW			BIT(5)
+#define	PHY_ALLR			BIT(6)
+#define	PHY_ALLW			BIT(7)
+#define	PHY_TXPWR			BIT(8)
+#define	PHY_PWRDIFF			BIT(9)
+
+enum dbgp_flag_e {
+	FQOS = 0,
+	FTX = 1,
+	FRX = 2,
+	FSEC = 3,
+	FMGNT = 4,
+	FMLME = 5,
+	FRESOURCE = 6,
+	FBEACON = 7,
+	FISR = 8,
+	FPHY = 9,
+	FMP = 10,
+	FEEPROM = 11,
+	FPWR = 12,
+	FDM = 13,
+	FDBGCtrl = 14,
+	FC2H = 15,
+	FBT = 16,
+	FINIT = 17,
+	FIOCTL = 18,
+	DBGP_TYPE_MAX
+};
+
+#define RT_ASSERT(_exp, fmt)				\
+	do {						\
+		if (!(_exp)) {			\
+			printk(KERN_DEBUG "%s:%s(): ", KBUILD_MODNAME, \
+			__func__);			\
+			printk fmt;			\
+		} \
+	} while (0);
+
+#define RT_TRACE(rtlpriv, comp, level, fmt)\
+	do { \
+		if (unlikely(((comp) & rtlpriv->dbg.global_debugcomponents) && \
+			((level) <= rtlpriv->dbg.global_debuglevel))) {\
+			printk(KERN_DEBUG "%s:%s():<%lx-%x> ", KBUILD_MODNAME, \
+			__func__, in_interrupt(), in_atomic());	\
+			printk fmt;				\
+		} \
+	} while (0);
+
+#define RTPRINT(rtlpriv, dbgtype, dbgflag, printstr)	\
+	do {						\
+		if (unlikely(rtlpriv->dbg.dbgp_type[dbgtype] & dbgflag)) { \
+			printk(KERN_DEBUG "%s: ", KBUILD_MODNAME);	\
+			printk printstr;		\
+		}					\
+	} while (0);
+
+#define RT_PRINT_DATA(rtlpriv, _comp, _level, _titlestring, _hexdata, \
+		_hexdatalen) \
+	do {\
+		if (unlikely(((_comp) & rtlpriv->dbg.global_debugcomponents) &&\
+			(_level <= rtlpriv->dbg.global_debuglevel)))	{ \
+			int __i;					\
+			u8*	ptr = (u8 *)_hexdata;			\
+			printk(KERN_DEBUG "%s: ", KBUILD_MODNAME);	\
+			printk("In process \"%s\" (pid %i):", current->comm,\
+					current->pid); \
+			printk(_titlestring);		\
+			for (__i = 0; __i < (int)_hexdatalen; __i++) {	\
+				printk("%02X%s", ptr[__i], (((__i + 1) % 4)\
+							== 0) ? "  " : " ");\
+				if (((__i + 1) % 16) == 0)		\
+					printk("\n");			\
+			}				\
+			printk(KERN_DEBUG "\n");			\
+		} \
+	} while (0);
+
+#define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+#define MAC_ARG(x) \
+	((u8 *)(x))[0], ((u8 *)(x))[1], ((u8 *)(x))[2],\
+	((u8 *)(x))[3], ((u8 *)(x))[4], ((u8 *)(x))[5]
+
+void rtl_dbgp_flag_init(struct ieee80211_hw *hw);
+#endif
diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c
new file mode 100644
index 00000000000..b8433f3a9bc
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/efuse.c
@@ -0,0 +1,1189 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * Tmis program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * Tmis program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * tmis program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * Tme full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "efuse.h"
+
+static const u8 MAX_PGPKT_SIZE = 9;
+static const u8 PGPKT_DATA_SIZE = 8;
+static const int EFUSE_MAX_SIZE = 512;
+
+static const u8 EFUSE_OOB_PROTECT_BYTES = 15;
+
+static const struct efuse_map RTL8712_SDIO_EFUSE_TABLE[] = {
+	{0, 0, 0, 2},
+	{0, 1, 0, 2},
+	{0, 2, 0, 2},
+	{1, 0, 0, 1},
+	{1, 0, 1, 1},
+	{1, 1, 0, 1},
+	{1, 1, 1, 3},
+	{1, 3, 0, 17},
+	{3, 3, 1, 48},
+	{10, 0, 0, 6},
+	{10, 3, 0, 1},
+	{10, 3, 1, 1},
+	{11, 0, 0, 28}
+};
+
+static void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset,
+					u8 *pbuf);
+static void efuse_shadow_read_1byte(struct ieee80211_hw *hw, u16 offset,
+				    u8 *value);
+static void efuse_shadow_read_2byte(struct ieee80211_hw *hw, u16 offset,
+				    u16 *value);
+static void efuse_shadow_read_4byte(struct ieee80211_hw *hw, u16 offset,
+				    u32 *value);
+static void efuse_shadow_write_1byte(struct ieee80211_hw *hw, u16 offset,
+				     u8 value);
+static void efuse_shadow_write_2byte(struct ieee80211_hw *hw, u16 offset,
+				     u16 value);
+static void efuse_shadow_write_4byte(struct ieee80211_hw *hw, u16 offset,
+				     u32 value);
+static int efuse_one_byte_read(struct ieee80211_hw *hw, u16 addr,
+					u8 *data);
+static int efuse_one_byte_write(struct ieee80211_hw *hw, u16 addr,
+					u8 data);
+static void efuse_read_all_map(struct ieee80211_hw *hw, u8 *efuse);
+static int efuse_pg_packet_read(struct ieee80211_hw *hw, u8 offset,
+					u8 *data);
+static int efuse_pg_packet_write(struct ieee80211_hw *hw, u8 offset,
+				 u8 word_en, u8 *data);
+static void efuse_word_enable_data_read(u8 word_en, u8 *sourdata,
+					u8 *targetdata);
+static u8 efuse_word_enable_data_write(struct ieee80211_hw *hw,
+				       u16 efuse_addr, u8 word_en, u8 *data);
+static void efuse_power_switch(struct ieee80211_hw *hw, u8 bwrite,
+					u8 pwrstate);
+static u16 efuse_get_current_size(struct ieee80211_hw *hw);
+static u8 efuse_calculate_word_cnts(u8 word_en);
+
+void efuse_initialize(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 bytetemp;
+	u8 temp;
+
+	bytetemp = rtl_read_byte(rtlpriv, rtlpriv->cfg->maps[SYS_FUNC_EN] + 1);
+	temp = bytetemp | 0x20;
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[SYS_FUNC_EN] + 1, temp);
+
+	bytetemp = rtl_read_byte(rtlpriv, rtlpriv->cfg->maps[SYS_ISO_CTRL] + 1);
+	temp = bytetemp & 0xFE;
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[SYS_ISO_CTRL] + 1, temp);
+
+	bytetemp = rtl_read_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_TEST] + 3);
+	temp = bytetemp | 0x80;
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_TEST] + 3, temp);
+
+	rtl_write_byte(rtlpriv, 0x2F8, 0x3);
+
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 3, 0x72);
+
+}
+
+u8 efuse_read_1byte(struct ieee80211_hw *hw, u16 address)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 data;
+	u8 bytetemp;
+	u8 temp;
+	u32 k = 0;
+
+	if (address < EFUSE_REAL_CONTENT_LEN) {
+		temp = address & 0xFF;
+		rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 1,
+			       temp);
+		bytetemp = rtl_read_byte(rtlpriv,
+					 rtlpriv->cfg->maps[EFUSE_CTRL] + 2);
+		temp = ((address >> 8) & 0x03) | (bytetemp & 0xFC);
+		rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 2,
+			       temp);
+
+		bytetemp = rtl_read_byte(rtlpriv,
+					 rtlpriv->cfg->maps[EFUSE_CTRL] + 3);
+		temp = bytetemp & 0x7F;
+		rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 3,
+			       temp);
+
+		bytetemp = rtl_read_byte(rtlpriv,
+					 rtlpriv->cfg->maps[EFUSE_CTRL] + 3);
+		while (!(bytetemp & 0x80)) {
+			bytetemp = rtl_read_byte(rtlpriv,
+						 rtlpriv->cfg->
+						 maps[EFUSE_CTRL] + 3);
+			k++;
+			if (k == 1000) {
+				k = 0;
+				break;
+			}
+		}
+		data = rtl_read_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL]);
+		return data;
+	} else
+		return 0xFF;
+
+}
+EXPORT_SYMBOL(efuse_read_1byte);
+
+void efuse_write_1byte(struct ieee80211_hw *hw, u16 address, u8 value)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 bytetemp;
+	u8 temp;
+	u32 k = 0;
+
+	RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
+		 ("Addr=%x Data =%x\n", address, value));
+
+	if (address < EFUSE_REAL_CONTENT_LEN) {
+		rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL], value);
+
+		temp = address & 0xFF;
+		rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 1,
+			       temp);
+		bytetemp = rtl_read_byte(rtlpriv,
+					 rtlpriv->cfg->maps[EFUSE_CTRL] + 2);
+
+		temp = ((address >> 8) & 0x03) | (bytetemp & 0xFC);
+		rtl_write_byte(rtlpriv,
+			       rtlpriv->cfg->maps[EFUSE_CTRL] + 2, temp);
+
+		bytetemp = rtl_read_byte(rtlpriv,
+					 rtlpriv->cfg->maps[EFUSE_CTRL] + 3);
+		temp = bytetemp | 0x80;
+		rtl_write_byte(rtlpriv,
+			       rtlpriv->cfg->maps[EFUSE_CTRL] + 3, temp);
+
+		bytetemp = rtl_read_byte(rtlpriv,
+					 rtlpriv->cfg->maps[EFUSE_CTRL] + 3);
+
+		while (bytetemp & 0x80) {
+			bytetemp = rtl_read_byte(rtlpriv,
+						 rtlpriv->cfg->
+						 maps[EFUSE_CTRL] + 3);
+			k++;
+			if (k == 100) {
+				k = 0;
+				break;
+			}
+		}
+	}
+
+}
+
+static void read_efuse_byte(struct ieee80211_hw *hw, u16 _offset, u8 *pbuf)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 value32;
+	u8 readbyte;
+	u16 retry;
+
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 1,
+		       (_offset & 0xff));
+	readbyte = rtl_read_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 2);
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 2,
+		       ((_offset >> 8) & 0x03) | (readbyte & 0xfc));
+
+	readbyte = rtl_read_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 3);
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 3,
+		       (readbyte & 0x7f));
+
+	retry = 0;
+	value32 = rtl_read_dword(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL]);
+	while (!(((value32 >> 24) & 0xff) & 0x80) && (retry < 10000)) {
+		value32 = rtl_read_dword(rtlpriv,
+					 rtlpriv->cfg->maps[EFUSE_CTRL]);
+		retry++;
+	}
+
+	udelay(50);
+	value32 = rtl_read_dword(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL]);
+
+	*pbuf = (u8) (value32 & 0xff);
+}
+
+void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 efuse_tbl[EFUSE_MAP_LEN];
+	u8 rtemp8[1];
+	u16 efuse_addr = 0;
+	u8 offset, wren;
+	u16 i;
+	u16 j;
+	u16 efuse_word[EFUSE_MAX_SECTION][EFUSE_MAX_WORD_UNIT];
+	u16 efuse_utilized = 0;
+	u8 efuse_usage;
+
+	if ((_offset + _size_byte) > EFUSE_MAP_LEN) {
+		RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
+			 ("read_efuse(): Invalid offset(%#x) with read "
+			  "bytes(%#x)!!\n", _offset, _size_byte));
+		return;
+	}
+
+	for (i = 0; i < EFUSE_MAX_SECTION; i++)
+		for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++)
+			efuse_word[i][j] = 0xFFFF;
+
+	read_efuse_byte(hw, efuse_addr, rtemp8);
+	if (*rtemp8 != 0xFF) {
+		efuse_utilized++;
+		RTPRINT(rtlpriv, FEEPROM, EFUSE_READ_ALL,
+			("Addr=%d\n", efuse_addr));
+		efuse_addr++;
+	}
+
+	while ((*rtemp8 != 0xFF) && (efuse_addr < EFUSE_REAL_CONTENT_LEN)) {
+		offset = ((*rtemp8 >> 4) & 0x0f);
+
+		if (offset < EFUSE_MAX_SECTION) {
+			wren = (*rtemp8 & 0x0f);
+			RTPRINT(rtlpriv, FEEPROM, EFUSE_READ_ALL,
+				("offset-%d Worden=%x\n", offset, wren));
+
+			for (i = 0; i < EFUSE_MAX_WORD_UNIT; i++) {
+				if (!(wren & 0x01)) {
+					RTPRINT(rtlpriv, FEEPROM,
+						EFUSE_READ_ALL, ("Addr=%d\n",
+								 efuse_addr));
+
+					read_efuse_byte(hw, efuse_addr, rtemp8);
+					efuse_addr++;
+					efuse_utilized++;
+					efuse_word[offset][i] = (*rtemp8 & 0xff);
+
+					if (efuse_addr >= EFUSE_REAL_CONTENT_LEN)
+						break;
+
+					RTPRINT(rtlpriv, FEEPROM,
+						EFUSE_READ_ALL, ("Addr=%d\n",
+								 efuse_addr));
+
+					read_efuse_byte(hw, efuse_addr, rtemp8);
+					efuse_addr++;
+					efuse_utilized++;
+					efuse_word[offset][i] |=
+					    (((u16)*rtemp8 << 8) & 0xff00);
+
+					if (efuse_addr >= EFUSE_REAL_CONTENT_LEN)
+						break;
+				}
+
+				wren >>= 1;
+			}
+		}
+
+		RTPRINT(rtlpriv, FEEPROM, EFUSE_READ_ALL,
+			("Addr=%d\n", efuse_addr));
+		read_efuse_byte(hw, efuse_addr, rtemp8);
+		if (*rtemp8 != 0xFF && (efuse_addr < 512)) {
+			efuse_utilized++;
+			efuse_addr++;
+		}
+	}
+
+	for (i = 0; i < EFUSE_MAX_SECTION; i++) {
+		for (j = 0; j < EFUSE_MAX_WORD_UNIT; j++) {
+			efuse_tbl[(i * 8) + (j * 2)] =
+			    (efuse_word[i][j] & 0xff);
+			efuse_tbl[(i * 8) + ((j * 2) + 1)] =
+			    ((efuse_word[i][j] >> 8) & 0xff);
+		}
+	}
+
+	for (i = 0; i < _size_byte; i++)
+		pbuf[i] = efuse_tbl[_offset + i];
+
+	rtlefuse->efuse_usedbytes = efuse_utilized;
+	efuse_usage = (u8)((efuse_utilized * 100) / EFUSE_REAL_CONTENT_LEN);
+	rtlefuse->efuse_usedpercentage = efuse_usage;
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_EFUSE_BYTES,
+				      (u8 *)&efuse_utilized);
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_EFUSE_USAGE,
+				      (u8 *)&efuse_usage);
+}
+
+bool efuse_shadow_update_chk(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 section_idx, i, Base;
+	u16 words_need = 0, hdr_num = 0, totalbytes, efuse_used;
+	bool bwordchanged, bresult = true;
+
+	for (section_idx = 0; section_idx < 16; section_idx++) {
+		Base = section_idx * 8;
+		bwordchanged = false;
+
+		for (i = 0; i < 8; i = i + 2) {
+			if ((rtlefuse->efuse_map[EFUSE_INIT_MAP][Base + i] !=
+			     rtlefuse->efuse_map[EFUSE_MODIFY_MAP][Base + i]) ||
+			    (rtlefuse->efuse_map[EFUSE_INIT_MAP][Base + i + 1] !=
+			     rtlefuse->efuse_map[EFUSE_MODIFY_MAP][Base + i +
+								   1])) {
+				words_need++;
+				bwordchanged = true;
+			}
+		}
+
+		if (bwordchanged == true)
+			hdr_num++;
+	}
+
+	totalbytes = hdr_num + words_need * 2;
+	efuse_used = rtlefuse->efuse_usedbytes;
+
+	if ((totalbytes + efuse_used) >=
+	    (EFUSE_MAX_SIZE - EFUSE_OOB_PROTECT_BYTES))
+		bresult = false;
+
+	RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
+		 ("efuse_shadow_update_chk(): totalbytes(%#x), "
+		  "hdr_num(%#x), words_need(%#x), efuse_used(%d)\n",
+		  totalbytes, hdr_num, words_need, efuse_used));
+
+	return bresult;
+}
+
+void efuse_shadow_read(struct ieee80211_hw *hw, u8 type,
+		       u16 offset, u32 *value)
+{
+	if (type == 1)
+		efuse_shadow_read_1byte(hw, offset, (u8 *) value);
+	else if (type == 2)
+		efuse_shadow_read_2byte(hw, offset, (u16 *) value);
+	else if (type == 4)
+		efuse_shadow_read_4byte(hw, offset, (u32 *) value);
+
+}
+
+void efuse_shadow_write(struct ieee80211_hw *hw, u8 type, u16 offset,
+				u32 value)
+{
+	if (type == 1)
+		efuse_shadow_write_1byte(hw, offset, (u8) value);
+	else if (type == 2)
+		efuse_shadow_write_2byte(hw, offset, (u16) value);
+	else if (type == 4)
+		efuse_shadow_write_4byte(hw, offset, (u32) value);
+
+}
+
+bool efuse_shadow_update(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u16 i, offset, base;
+	u8 word_en = 0x0F;
+	u8 first_pg = false;
+
+	RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, ("--->\n"));
+
+	if (!efuse_shadow_update_chk(hw)) {
+		efuse_read_all_map(hw, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0]);
+		memcpy((void *)&rtlefuse->efuse_map[EFUSE_MODIFY_MAP][0],
+		       (void *)&rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
+		       rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]);
+
+		RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
+			 ("<---efuse out of capacity!!\n"));
+		return false;
+	}
+	efuse_power_switch(hw, true, true);
+
+	for (offset = 0; offset < 16; offset++) {
+
+		word_en = 0x0F;
+		base = offset * 8;
+
+		for (i = 0; i < 8; i++) {
+			if (first_pg == true) {
+
+				word_en &= ~(BIT(i / 2));
+
+				rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] =
+				    rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i];
+			} else {
+
+				if (rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] !=
+				    rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i]) {
+					word_en &= ~(BIT(i / 2));
+
+					rtlefuse->efuse_map[EFUSE_INIT_MAP][base + i] =
+					    rtlefuse->efuse_map[EFUSE_MODIFY_MAP][base + i];
+				}
+			}
+		}
+
+		if (word_en != 0x0F) {
+			u8 tmpdata[8];
+			memcpy((void *)tmpdata,
+			       (void *)(&rtlefuse->
+					efuse_map[EFUSE_MODIFY_MAP][base]), 8);
+			RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_LOUD,
+				      ("U-efuse\n"), tmpdata, 8);
+
+			if (!efuse_pg_packet_write(hw, (u8) offset, word_en,
+						   tmpdata)) {
+				RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+					 ("PG section(%#x) fail!!\n", offset));
+				break;
+			}
+		}
+
+	}
+
+	efuse_power_switch(hw, true, false);
+	efuse_read_all_map(hw, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0]);
+
+	memcpy((void *)&rtlefuse->efuse_map[EFUSE_MODIFY_MAP][0],
+	       (void *)&rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
+	       rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]);
+
+	RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, ("<---\n"));
+	return true;
+}
+
+void rtl_efuse_shadow_map_update(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+	if (rtlefuse->autoload_failflag == true) {
+		memset((void *)(&rtlefuse->efuse_map[EFUSE_INIT_MAP][0]), 128,
+		       0xFF);
+	} else
+		efuse_read_all_map(hw, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0]);
+
+	memcpy((void *)&rtlefuse->efuse_map[EFUSE_MODIFY_MAP][0],
+	       (void *)&rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
+	       rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]);
+
+}
+EXPORT_SYMBOL(rtl_efuse_shadow_map_update);
+
+void efuse_force_write_vendor_Id(struct ieee80211_hw *hw)
+{
+	u8 tmpdata[8] = { 0xFF, 0xFF, 0xEC, 0x10, 0xFF, 0xFF, 0xFF, 0xFF };
+
+	efuse_power_switch(hw, true, true);
+
+	efuse_pg_packet_write(hw, 1, 0xD, tmpdata);
+
+	efuse_power_switch(hw, true, false);
+
+}
+
+void efuse_re_pg_section(struct ieee80211_hw *hw, u8 section_idx)
+{
+}
+
+static void efuse_shadow_read_1byte(struct ieee80211_hw *hw,
+				    u16 offset, u8 *value)
+{
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	*value = rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset];
+}
+
+static void efuse_shadow_read_2byte(struct ieee80211_hw *hw,
+				    u16 offset, u16 *value)
+{
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+	*value = rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset];
+	*value |= rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset + 1] << 8;
+
+}
+
+static void efuse_shadow_read_4byte(struct ieee80211_hw *hw,
+				    u16 offset, u32 *value)
+{
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+	*value = rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset];
+	*value |= rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset + 1] << 8;
+	*value |= rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset + 2] << 16;
+	*value |= rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset + 3] << 24;
+}
+
+static void efuse_shadow_write_1byte(struct ieee80211_hw *hw,
+				     u16 offset, u8 value)
+{
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+	rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset] = value;
+}
+
+static void efuse_shadow_write_2byte(struct ieee80211_hw *hw,
+				     u16 offset, u16 value)
+{
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+	rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset] = value & 0x00FF;
+	rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset + 1] = value >> 8;
+
+}
+
+static void efuse_shadow_write_4byte(struct ieee80211_hw *hw,
+				     u16 offset, u32 value)
+{
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+	rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset] =
+	    (u8) (value & 0x000000FF);
+	rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset + 1] =
+	    (u8) ((value >> 8) & 0x0000FF);
+	rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset + 2] =
+	    (u8) ((value >> 16) & 0x00FF);
+	rtlefuse->efuse_map[EFUSE_MODIFY_MAP][offset + 3] =
+	    (u8) ((value >> 24) & 0xFF);
+
+}
+
+static int efuse_one_byte_read(struct ieee80211_hw *hw, u16 addr, u8 *data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 tmpidx = 0;
+	int bresult;
+
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 1,
+		       (u8) (addr & 0xff));
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 2,
+		       ((u8) ((addr >> 8) & 0x03)) |
+		       (rtl_read_byte(rtlpriv,
+				      rtlpriv->cfg->maps[EFUSE_CTRL] + 2) &
+			0xFC));
+
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 3, 0x72);
+
+	while (!(0x80 & rtl_read_byte(rtlpriv,
+				      rtlpriv->cfg->maps[EFUSE_CTRL] + 3))
+	       && (tmpidx < 100)) {
+		tmpidx++;
+	}
+
+	if (tmpidx < 100) {
+		*data = rtl_read_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL]);
+		bresult = true;
+	} else {
+		*data = 0xff;
+		bresult = false;
+	}
+	return bresult;
+}
+
+static int efuse_one_byte_write(struct ieee80211_hw *hw, u16 addr, u8 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 tmpidx = 0;
+	bool bresult;
+
+	RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
+		 ("Addr = %x Data=%x\n", addr, data));
+
+	rtl_write_byte(rtlpriv,
+		       rtlpriv->cfg->maps[EFUSE_CTRL] + 1, (u8) (addr & 0xff));
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 2,
+		       (rtl_read_byte(rtlpriv,
+			 rtlpriv->cfg->maps[EFUSE_CTRL] +
+			 2) & 0xFC) | (u8) ((addr >> 8) & 0x03));
+
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL], data);
+	rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 3, 0xF2);
+
+	while ((0x80 & rtl_read_byte(rtlpriv,
+				     rtlpriv->cfg->maps[EFUSE_CTRL] + 3))
+	       && (tmpidx < 100)) {
+		tmpidx++;
+	}
+
+	if (tmpidx < 100)
+		bresult = true;
+	else
+		bresult = false;
+
+	return bresult;
+}
+
+static void efuse_read_all_map(struct ieee80211_hw *hw, u8 * efuse)
+{
+	efuse_power_switch(hw, false, true);
+	read_efuse(hw, 0, 128, efuse);
+	efuse_power_switch(hw, false, false);
+}
+
+static void efuse_read_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr,
+				u8 efuse_data, u8 offset, u8 *tmpdata,
+				u8 *readstate)
+{
+	bool bdataempty = true;
+	u8 hoffset;
+	u8 tmpidx;
+	u8 hworden;
+	u8 word_cnts;
+
+	hoffset = (efuse_data >> 4) & 0x0F;
+	hworden = efuse_data & 0x0F;
+	word_cnts = efuse_calculate_word_cnts(hworden);
+
+	if (hoffset == offset) {
+		for (tmpidx = 0; tmpidx < word_cnts * 2; tmpidx++) {
+			if (efuse_one_byte_read(hw, *efuse_addr + 1 + tmpidx,
+			    &efuse_data)) {
+				tmpdata[tmpidx] = efuse_data;
+				if (efuse_data != 0xff)
+					bdataempty = true;
+			}
+		}
+
+		if (bdataempty == true)
+			*readstate = PG_STATE_DATA;
+		else {
+			*efuse_addr = *efuse_addr + (word_cnts * 2) + 1;
+			*readstate = PG_STATE_HEADER;
+		}
+
+	} else {
+		*efuse_addr = *efuse_addr + (word_cnts * 2) + 1;
+		*readstate = PG_STATE_HEADER;
+	}
+}
+
+static int efuse_pg_packet_read(struct ieee80211_hw *hw, u8 offset, u8 *data)
+{
+	u8 readstate = PG_STATE_HEADER;
+
+	bool bcontinual = true;
+
+	u8 efuse_data, word_cnts = 0;
+	u16 efuse_addr = 0;
+	u8 hworden;
+	u8 tmpdata[8];
+
+	if (data == NULL)
+		return false;
+	if (offset > 15)
+		return false;
+
+	memset((void *)data, PGPKT_DATA_SIZE * sizeof(u8), 0xff);
+	memset((void *)tmpdata, PGPKT_DATA_SIZE * sizeof(u8), 0xff);
+
+	while (bcontinual && (efuse_addr < EFUSE_MAX_SIZE)) {
+		if (readstate & PG_STATE_HEADER) {
+			if (efuse_one_byte_read(hw, efuse_addr, &efuse_data)
+			    && (efuse_data != 0xFF))
+				efuse_read_data_case1(hw, &efuse_addr,
+						      efuse_data,
+						      offset, tmpdata,
+						      &readstate);
+			else
+				bcontinual = false;
+		} else if (readstate & PG_STATE_DATA) {
+			efuse_word_enable_data_read(hworden, tmpdata, data);
+			efuse_addr = efuse_addr + (word_cnts * 2) + 1;
+			readstate = PG_STATE_HEADER;
+		}
+
+	}
+
+	if ((data[0] == 0xff) && (data[1] == 0xff) &&
+	    (data[2] == 0xff) && (data[3] == 0xff) &&
+	    (data[4] == 0xff) && (data[5] == 0xff) &&
+	    (data[6] == 0xff) && (data[7] == 0xff))
+		return false;
+	else
+		return true;
+
+}
+
+static void efuse_write_data_case1(struct ieee80211_hw *hw, u16 *efuse_addr,
+				u8 efuse_data, u8 offset, int *bcontinual,
+				u8 *write_state, struct pgpkt_struct target_pkt,
+				int *repeat_times, int *bresult, u8 word_en)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct pgpkt_struct tmp_pkt;
+	int bdataempty = true;
+	u8 originaldata[8 * sizeof(u8)];
+	u8 badworden = 0x0F;
+	u8 match_word_en, tmp_word_en;
+	u8 tmpindex;
+	u8 tmp_header = efuse_data;
+	u8 tmp_word_cnts;
+
+	tmp_pkt.offset = (tmp_header >> 4) & 0x0F;
+	tmp_pkt.word_en = tmp_header & 0x0F;
+	tmp_word_cnts = efuse_calculate_word_cnts(tmp_pkt.word_en);
+
+	if (tmp_pkt.offset != target_pkt.offset) {
+		efuse_addr = efuse_addr + (tmp_word_cnts * 2) + 1;
+		*write_state = PG_STATE_HEADER;
+	} else {
+		for (tmpindex = 0; tmpindex < (tmp_word_cnts * 2); tmpindex++) {
+			u16 address = *efuse_addr + 1 + tmpindex;
+			if (efuse_one_byte_read(hw, address,
+			     &efuse_data) && (efuse_data != 0xFF))
+				bdataempty = false;
+		}
+
+		if (bdataempty == false) {
+			efuse_addr = efuse_addr + (tmp_word_cnts * 2) + 1;
+			*write_state = PG_STATE_HEADER;
+		} else {
+			match_word_en = 0x0F;
+			if (!((target_pkt.word_en & BIT(0)) |
+			     (tmp_pkt.word_en & BIT(0))))
+				match_word_en &= (~BIT(0));
+
+			if (!((target_pkt.word_en & BIT(1)) |
+			     (tmp_pkt.word_en & BIT(1))))
+				match_word_en &= (~BIT(1));
+
+			if (!((target_pkt.word_en & BIT(2)) |
+			     (tmp_pkt.word_en & BIT(2))))
+				match_word_en &= (~BIT(2));
+
+			if (!((target_pkt.word_en & BIT(3)) |
+			     (tmp_pkt.word_en & BIT(3))))
+				match_word_en &= (~BIT(3));
+
+			if ((match_word_en & 0x0F) != 0x0F) {
+				badworden = efuse_word_enable_data_write(
+							    hw, *efuse_addr + 1,
+							    tmp_pkt.word_en,
+							    target_pkt.data);
+
+				if (0x0F != (badworden & 0x0F)) {
+					u8 reorg_offset = offset;
+					u8 reorg_worden = badworden;
+					efuse_pg_packet_write(hw, reorg_offset,
+							       reorg_worden,
+							       originaldata);
+				}
+
+				tmp_word_en = 0x0F;
+				if ((target_pkt.word_en & BIT(0)) ^
+				    (match_word_en & BIT(0)))
+					tmp_word_en &= (~BIT(0));
+
+				if ((target_pkt.word_en & BIT(1)) ^
+				    (match_word_en & BIT(1)))
+					tmp_word_en &= (~BIT(1));
+
+				if ((target_pkt.word_en & BIT(2)) ^
+					(match_word_en & BIT(2)))
+					tmp_word_en &= (~BIT(2));
+
+				if ((target_pkt.word_en & BIT(3)) ^
+				    (match_word_en & BIT(3)))
+					tmp_word_en &= (~BIT(3));
+
+				if ((tmp_word_en & 0x0F) != 0x0F) {
+					*efuse_addr = efuse_get_current_size(hw);
+					target_pkt.offset = offset;
+					target_pkt.word_en = tmp_word_en;
+				} else
+					*bcontinual = false;
+				*write_state = PG_STATE_HEADER;
+				*repeat_times += 1;
+				if (*repeat_times > EFUSE_REPEAT_THRESHOLD_) {
+					*bcontinual = false;
+					*bresult = false;
+				}
+			} else {
+				*efuse_addr += (2 * tmp_word_cnts) + 1;
+				target_pkt.offset = offset;
+				target_pkt.word_en = word_en;
+				*write_state = PG_STATE_HEADER;
+			}
+		}
+	}
+	RTPRINT(rtlpriv, FEEPROM, EFUSE_PG, ("efuse PG_STATE_HEADER-1\n"));
+}
+
+static void efuse_write_data_case2(struct ieee80211_hw *hw, u16 *efuse_addr,
+				   int *bcontinual, u8 *write_state,
+				   struct pgpkt_struct target_pkt,
+				   int *repeat_times, int *bresult)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct pgpkt_struct tmp_pkt;
+	u8 pg_header;
+	u8 tmp_header;
+	u8 originaldata[8 * sizeof(u8)];
+	u8 tmp_word_cnts;
+	u8 badworden = 0x0F;
+
+	pg_header = ((target_pkt.offset << 4) & 0xf0) | target_pkt.word_en;
+	efuse_one_byte_write(hw, *efuse_addr, pg_header);
+	efuse_one_byte_read(hw, *efuse_addr, &tmp_header);
+
+	if (tmp_header == pg_header)
+		*write_state = PG_STATE_DATA;
+	else if (tmp_header == 0xFF) {
+		*write_state = PG_STATE_HEADER;
+		*repeat_times += 1;
+		if (*repeat_times > EFUSE_REPEAT_THRESHOLD_) {
+			*bcontinual = false;
+			*bresult = false;
+		}
+	} else {
+		tmp_pkt.offset = (tmp_header >> 4) & 0x0F;
+		tmp_pkt.word_en = tmp_header & 0x0F;
+
+		tmp_word_cnts = efuse_calculate_word_cnts(tmp_pkt.word_en);
+
+		memset((void *)originaldata, 8 * sizeof(u8), 0xff);
+
+		if (efuse_pg_packet_read(hw, tmp_pkt.offset, originaldata)) {
+			badworden = efuse_word_enable_data_write(hw,
+				    *efuse_addr + 1, tmp_pkt.word_en,
+				    originaldata);
+
+			if (0x0F != (badworden & 0x0F)) {
+				u8 reorg_offset = tmp_pkt.offset;
+				u8 reorg_worden = badworden;
+				efuse_pg_packet_write(hw, reorg_offset,
+						      reorg_worden,
+						      originaldata);
+				*efuse_addr = efuse_get_current_size(hw);
+			 } else
+				*efuse_addr = *efuse_addr + (tmp_word_cnts * 2)
+					      + 1;
+		} else
+			*efuse_addr = *efuse_addr + (tmp_word_cnts * 2) + 1;
+
+		*write_state = PG_STATE_HEADER;
+		*repeat_times += 1;
+		if (*repeat_times > EFUSE_REPEAT_THRESHOLD_) {
+			*bcontinual = false;
+			*bresult = false;
+		}
+
+		RTPRINT(rtlpriv, FEEPROM, EFUSE_PG,
+			("efuse PG_STATE_HEADER-2\n"));
+	}
+}
+
+static int efuse_pg_packet_write(struct ieee80211_hw *hw,
+				 u8 offset, u8 word_en, u8 *data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct pgpkt_struct target_pkt;
+	u8 write_state = PG_STATE_HEADER;
+	int bcontinual = true, bdataempty = true, bresult = true;
+	u16 efuse_addr = 0;
+	u8 efuse_data;
+	u8 target_word_cnts = 0;
+	u8 badworden = 0x0F;
+	static int repeat_times;
+
+	if (efuse_get_current_size(hw) >=
+	    (EFUSE_MAX_SIZE - EFUSE_OOB_PROTECT_BYTES)) {
+		RTPRINT(rtlpriv, FEEPROM, EFUSE_PG,
+			("efuse_pg_packet_write error\n"));
+		return false;
+	}
+
+	target_pkt.offset = offset;
+	target_pkt.word_en = word_en;
+
+	memset((void *)target_pkt.data, 8 * sizeof(u8), 0xFF);
+
+	efuse_word_enable_data_read(word_en, data, target_pkt.data);
+	target_word_cnts = efuse_calculate_word_cnts(target_pkt.word_en);
+
+	RTPRINT(rtlpriv, FEEPROM, EFUSE_PG, ("efuse Power ON\n"));
+
+	while (bcontinual && (efuse_addr <
+	       (EFUSE_MAX_SIZE - EFUSE_OOB_PROTECT_BYTES))) {
+
+		if (write_state == PG_STATE_HEADER) {
+			bdataempty = true;
+			badworden = 0x0F;
+			RTPRINT(rtlpriv, FEEPROM, EFUSE_PG,
+				("efuse PG_STATE_HEADER\n"));
+
+			if (efuse_one_byte_read(hw, efuse_addr, &efuse_data) &&
+			    (efuse_data != 0xFF))
+				efuse_write_data_case1(hw, &efuse_addr,
+						       efuse_data, offset,
+						       &bcontinual,
+						       &write_state, target_pkt,
+						       &repeat_times, &bresult,
+						       word_en);
+			else
+				efuse_write_data_case2(hw, &efuse_addr,
+						       &bcontinual,
+						       &write_state,
+						       target_pkt,
+						       &repeat_times,
+						       &bresult);
+
+		} else if (write_state == PG_STATE_DATA) {
+			RTPRINT(rtlpriv, FEEPROM, EFUSE_PG,
+				("efuse PG_STATE_DATA\n"));
+			badworden = 0x0f;
+			badworden =
+			    efuse_word_enable_data_write(hw, efuse_addr + 1,
+							 target_pkt.word_en,
+							 target_pkt.data);
+
+			if ((badworden & 0x0F) == 0x0F) {
+				bcontinual = false;
+			} else {
+				efuse_addr =
+				    efuse_addr + (2 * target_word_cnts) + 1;
+
+				target_pkt.offset = offset;
+				target_pkt.word_en = badworden;
+				target_word_cnts =
+				    efuse_calculate_word_cnts(target_pkt.
+							      word_en);
+				write_state = PG_STATE_HEADER;
+				repeat_times++;
+				if (repeat_times > EFUSE_REPEAT_THRESHOLD_) {
+					bcontinual = false;
+					bresult = false;
+				}
+				RTPRINT(rtlpriv, FEEPROM, EFUSE_PG,
+					("efuse PG_STATE_HEADER-3\n"));
+			}
+		}
+	}
+
+	if (efuse_addr >= (EFUSE_MAX_SIZE - EFUSE_OOB_PROTECT_BYTES)) {
+		RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
+			 ("efuse_addr(%#x) Out of size!!\n", efuse_addr));
+	}
+
+	return true;
+}
+
+static void efuse_word_enable_data_read(u8 word_en,
+					u8 *sourdata, u8 *targetdata)
+{
+	if (!(word_en & BIT(0))) {
+		targetdata[0] = sourdata[0];
+		targetdata[1] = sourdata[1];
+	}
+
+	if (!(word_en & BIT(1))) {
+		targetdata[2] = sourdata[2];
+		targetdata[3] = sourdata[3];
+	}
+
+	if (!(word_en & BIT(2))) {
+		targetdata[4] = sourdata[4];
+		targetdata[5] = sourdata[5];
+	}
+
+	if (!(word_en & BIT(3))) {
+		targetdata[6] = sourdata[6];
+		targetdata[7] = sourdata[7];
+	}
+}
+
+static u8 efuse_word_enable_data_write(struct ieee80211_hw *hw,
+				       u16 efuse_addr, u8 word_en, u8 *data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 tmpaddr;
+	u16 start_addr = efuse_addr;
+	u8 badworden = 0x0F;
+	u8 tmpdata[8];
+
+	memset((void *)tmpdata, PGPKT_DATA_SIZE, 0xff);
+	RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD,
+		 ("word_en = %x efuse_addr=%x\n", word_en, efuse_addr));
+
+	if (!(word_en & BIT(0))) {
+		tmpaddr = start_addr;
+		efuse_one_byte_write(hw, start_addr++, data[0]);
+		efuse_one_byte_write(hw, start_addr++, data[1]);
+
+		efuse_one_byte_read(hw, tmpaddr, &tmpdata[0]);
+		efuse_one_byte_read(hw, tmpaddr + 1, &tmpdata[1]);
+		if ((data[0] != tmpdata[0]) || (data[1] != tmpdata[1]))
+			badworden &= (~BIT(0));
+	}
+
+	if (!(word_en & BIT(1))) {
+		tmpaddr = start_addr;
+		efuse_one_byte_write(hw, start_addr++, data[2]);
+		efuse_one_byte_write(hw, start_addr++, data[3]);
+
+		efuse_one_byte_read(hw, tmpaddr, &tmpdata[2]);
+		efuse_one_byte_read(hw, tmpaddr + 1, &tmpdata[3]);
+		if ((data[2] != tmpdata[2]) || (data[3] != tmpdata[3]))
+			badworden &= (~BIT(1));
+	}
+
+	if (!(word_en & BIT(2))) {
+		tmpaddr = start_addr;
+		efuse_one_byte_write(hw, start_addr++, data[4]);
+		efuse_one_byte_write(hw, start_addr++, data[5]);
+
+		efuse_one_byte_read(hw, tmpaddr, &tmpdata[4]);
+		efuse_one_byte_read(hw, tmpaddr + 1, &tmpdata[5]);
+		if ((data[4] != tmpdata[4]) || (data[5] != tmpdata[5]))
+			badworden &= (~BIT(2));
+	}
+
+	if (!(word_en & BIT(3))) {
+		tmpaddr = start_addr;
+		efuse_one_byte_write(hw, start_addr++, data[6]);
+		efuse_one_byte_write(hw, start_addr++, data[7]);
+
+		efuse_one_byte_read(hw, tmpaddr, &tmpdata[6]);
+		efuse_one_byte_read(hw, tmpaddr + 1, &tmpdata[7]);
+		if ((data[6] != tmpdata[6]) || (data[7] != tmpdata[7]))
+			badworden &= (~BIT(3));
+	}
+
+	return badworden;
+}
+
+static void efuse_power_switch(struct ieee80211_hw *hw, u8 bwrite, u8 pwrstate)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 tempval;
+	u16 tmpV16;
+
+	if (pwrstate == true) {
+		tmpV16 = rtl_read_word(rtlpriv,
+				       rtlpriv->cfg->maps[SYS_ISO_CTRL]);
+		if (!(tmpV16 & rtlpriv->cfg->maps[EFUSE_PWC_EV12V])) {
+			tmpV16 |= rtlpriv->cfg->maps[EFUSE_PWC_EV12V];
+			rtl_write_word(rtlpriv,
+				       rtlpriv->cfg->maps[SYS_ISO_CTRL],
+				       tmpV16);
+		}
+
+		tmpV16 = rtl_read_word(rtlpriv,
+				       rtlpriv->cfg->maps[SYS_FUNC_EN]);
+		if (!(tmpV16 & rtlpriv->cfg->maps[EFUSE_FEN_ELDR])) {
+			tmpV16 |= rtlpriv->cfg->maps[EFUSE_FEN_ELDR];
+			rtl_write_word(rtlpriv,
+				       rtlpriv->cfg->maps[SYS_FUNC_EN], tmpV16);
+		}
+
+		tmpV16 = rtl_read_word(rtlpriv, rtlpriv->cfg->maps[SYS_CLK]);
+		if ((!(tmpV16 & rtlpriv->cfg->maps[EFUSE_LOADER_CLK_EN])) ||
+		    (!(tmpV16 & rtlpriv->cfg->maps[EFUSE_ANA8M]))) {
+			tmpV16 |= (rtlpriv->cfg->maps[EFUSE_LOADER_CLK_EN] |
+				   rtlpriv->cfg->maps[EFUSE_ANA8M]);
+			rtl_write_word(rtlpriv,
+				       rtlpriv->cfg->maps[SYS_CLK], tmpV16);
+		}
+	}
+
+	if (pwrstate == true) {
+		if (bwrite == true) {
+			tempval = rtl_read_byte(rtlpriv,
+						rtlpriv->cfg->maps[EFUSE_TEST] +
+						3);
+			tempval &= 0x0F;
+			tempval |= (VOLTAGE_V25 << 4);
+			rtl_write_byte(rtlpriv,
+				       rtlpriv->cfg->maps[EFUSE_TEST] + 3,
+				       (tempval | 0x80));
+		}
+
+	} else {
+		if (bwrite == true) {
+			tempval = rtl_read_byte(rtlpriv,
+						rtlpriv->cfg->maps[EFUSE_TEST] +
+						3);
+			rtl_write_byte(rtlpriv,
+				       rtlpriv->cfg->maps[EFUSE_TEST] + 3,
+				       (tempval & 0x7F));
+		}
+
+	}
+
+}
+
+static u16 efuse_get_current_size(struct ieee80211_hw *hw)
+{
+	int bcontinual = true;
+	u16 efuse_addr = 0;
+	u8 hoffset, hworden;
+	u8 efuse_data, word_cnts;
+
+	while (bcontinual && efuse_one_byte_read(hw, efuse_addr, &efuse_data)
+	       && (efuse_addr < EFUSE_MAX_SIZE)) {
+		if (efuse_data != 0xFF) {
+			hoffset = (efuse_data >> 4) & 0x0F;
+			hworden = efuse_data & 0x0F;
+			word_cnts = efuse_calculate_word_cnts(hworden);
+			efuse_addr = efuse_addr + (word_cnts * 2) + 1;
+		} else {
+			bcontinual = false;
+		}
+	}
+
+	return efuse_addr;
+}
+
+static u8 efuse_calculate_word_cnts(u8 word_en)
+{
+	u8 word_cnts = 0;
+	if (!(word_en & BIT(0)))
+		word_cnts++;
+	if (!(word_en & BIT(1)))
+		word_cnts++;
+	if (!(word_en & BIT(2)))
+		word_cnts++;
+	if (!(word_en & BIT(3)))
+		word_cnts++;
+	return word_cnts;
+}
+
+void efuse_reset_loader(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 tmp_u2b;
+
+	tmp_u2b = rtl_read_word(rtlpriv, rtlpriv->cfg->maps[SYS_FUNC_EN]);
+	rtl_write_word(rtlpriv, rtlpriv->cfg->maps[SYS_FUNC_EN],
+		       (tmp_u2b & ~(BIT(12))));
+	udelay(10000);
+	rtl_write_word(rtlpriv, rtlpriv->cfg->maps[SYS_FUNC_EN],
+		       (tmp_u2b | BIT(12)));
+	udelay(10000);
+}
+
+bool efuse_program_map(struct ieee80211_hw *hw, char *p_filename, u8 tabletype)
+{
+	return true;
+}
diff --git a/drivers/net/wireless/rtlwifi/efuse.h b/drivers/net/wireless/rtlwifi/efuse.h
new file mode 100644
index 00000000000..2d39a4df181
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/efuse.h
@@ -0,0 +1,124 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_EFUSE_H_
+#define __RTL_EFUSE_H_
+
+#define EFUSE_REAL_CONTENT_LEN		512
+#define EFUSE_MAP_LEN			128
+#define EFUSE_MAX_SECTION		16
+#define EFUSE_MAX_WORD_UNIT		4
+
+#define EFUSE_INIT_MAP			0
+#define EFUSE_MODIFY_MAP		1
+
+#define PG_STATE_HEADER			0x01
+#define PG_STATE_WORD_0			0x02
+#define PG_STATE_WORD_1			0x04
+#define PG_STATE_WORD_2			0x08
+#define PG_STATE_WORD_3			0x10
+#define PG_STATE_DATA			0x20
+
+#define PG_SWBYTE_H			0x01
+#define PG_SWBYTE_L			0x02
+
+#define _POWERON_DELAY_
+#define _PRE_EXECUTE_READ_CMD_
+
+#define EFUSE_REPEAT_THRESHOLD_		3
+
+struct efuse_map {
+	u8 offset;
+	u8 word_start;
+	u8 byte_start;
+	u8 byte_cnts;
+};
+
+struct pgpkt_struct {
+	u8 offset;
+	u8 word_en;
+	u8 data[8];
+};
+
+enum efuse_data_item {
+	EFUSE_CHIP_ID = 0,
+	EFUSE_LDO_SETTING,
+	EFUSE_CLK_SETTING,
+	EFUSE_SDIO_SETTING,
+	EFUSE_CCCR,
+	EFUSE_SDIO_MODE,
+	EFUSE_OCR,
+	EFUSE_F0CIS,
+	EFUSE_F1CIS,
+	EFUSE_MAC_ADDR,
+	EFUSE_EEPROM_VER,
+	EFUSE_CHAN_PLAN,
+	EFUSE_TXPW_TAB
+};
+
+enum {
+	VOLTAGE_V25 = 0x03,
+	LDOE25_SHIFT = 28,
+};
+
+struct efuse_priv {
+	u8 id[2];
+	u8 ldo_setting[2];
+	u8 clk_setting[2];
+	u8 cccr;
+	u8 sdio_mode;
+	u8 ocr[3];
+	u8 cis0[17];
+	u8 cis1[48];
+	u8 mac_addr[6];
+	u8 eeprom_verno;
+	u8 channel_plan;
+	u8 tx_power_b[14];
+	u8 tx_power_g[14];
+};
+
+extern void efuse_initialize(struct ieee80211_hw *hw);
+extern u8 efuse_read_1byte(struct ieee80211_hw *hw, u16 address);
+extern void efuse_write_1byte(struct ieee80211_hw *hw, u16 address, u8 value);
+extern void read_efuse(struct ieee80211_hw *hw, u16 _offset,
+		       u16 _size_byte, u8 *pbuf);
+extern void efuse_shadow_read(struct ieee80211_hw *hw, u8 type,
+			      u16 offset, u32 *value);
+extern void efuse_shadow_write(struct ieee80211_hw *hw, u8 type,
+			       u16 offset, u32 value);
+extern bool efuse_shadow_update(struct ieee80211_hw *hw);
+extern bool efuse_shadow_update_chk(struct ieee80211_hw *hw);
+extern void rtl_efuse_shadow_map_update(struct ieee80211_hw *hw);
+extern void efuse_force_write_vendor_Id(struct ieee80211_hw *hw);
+extern void efuse_re_pg_section(struct ieee80211_hw *hw, u8 section_idx);
+extern bool efuse_program_map(struct ieee80211_hw *hw,
+			      char *p_filename, u8 tabletype);
+extern void efuse_reset_loader(struct ieee80211_hw *hw);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
new file mode 100644
index 00000000000..0fa36aa6701
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -0,0 +1,1945 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "core.h"
+#include "wifi.h"
+#include "pci.h"
+#include "base.h"
+#include "ps.h"
+
+static const u16 pcibridge_vendors[PCI_BRIDGE_VENDOR_MAX] = {
+	INTEL_VENDOR_ID,
+	ATI_VENDOR_ID,
+	AMD_VENDOR_ID,
+	SIS_VENDOR_ID
+};
+
+/* Update PCI dependent default settings*/
+static void _rtl_pci_update_default_setting(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u8 pcibridge_vendor = pcipriv->ndis_adapter.pcibridge_vendor;
+
+	ppsc->reg_rfps_level = 0;
+	ppsc->b_support_aspm = 0;
+
+	/*Update PCI ASPM setting */
+	ppsc->const_amdpci_aspm = rtlpci->const_amdpci_aspm;
+	switch (rtlpci->const_pci_aspm) {
+	case 0:
+		/*No ASPM */
+		break;
+
+	case 1:
+		/*ASPM dynamically enabled/disable. */
+		ppsc->reg_rfps_level |= RT_RF_LPS_LEVEL_ASPM;
+		break;
+
+	case 2:
+		/*ASPM with Clock Req dynamically enabled/disable. */
+		ppsc->reg_rfps_level |= (RT_RF_LPS_LEVEL_ASPM |
+					 RT_RF_OFF_LEVL_CLK_REQ);
+		break;
+
+	case 3:
+		/*
+		 * Always enable ASPM and Clock Req
+		 * from initialization to halt.
+		 * */
+		ppsc->reg_rfps_level &= ~(RT_RF_LPS_LEVEL_ASPM);
+		ppsc->reg_rfps_level |= (RT_RF_PS_LEVEL_ALWAYS_ASPM |
+					 RT_RF_OFF_LEVL_CLK_REQ);
+		break;
+
+	case 4:
+		/*
+		 * Always enable ASPM without Clock Req
+		 * from initialization to halt.
+		 * */
+		ppsc->reg_rfps_level &= ~(RT_RF_LPS_LEVEL_ASPM |
+					  RT_RF_OFF_LEVL_CLK_REQ);
+		ppsc->reg_rfps_level |= RT_RF_PS_LEVEL_ALWAYS_ASPM;
+		break;
+	}
+
+	ppsc->reg_rfps_level |= RT_RF_OFF_LEVL_HALT_NIC;
+
+	/*Update Radio OFF setting */
+	switch (rtlpci->const_hwsw_rfoff_d3) {
+	case 1:
+		if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM)
+			ppsc->reg_rfps_level |= RT_RF_OFF_LEVL_ASPM;
+		break;
+
+	case 2:
+		if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM)
+			ppsc->reg_rfps_level |= RT_RF_OFF_LEVL_ASPM;
+		ppsc->reg_rfps_level |= RT_RF_OFF_LEVL_HALT_NIC;
+		break;
+
+	case 3:
+		ppsc->reg_rfps_level |= RT_RF_OFF_LEVL_PCI_D3;
+		break;
+	}
+
+	/*Set HW definition to determine if it supports ASPM. */
+	switch (rtlpci->const_support_pciaspm) {
+	case 0:{
+			/*Not support ASPM. */
+			bool b_support_aspm = false;
+			ppsc->b_support_aspm = b_support_aspm;
+			break;
+		}
+	case 1:{
+			/*Support ASPM. */
+			bool b_support_aspm = true;
+			bool b_support_backdoor = true;
+			ppsc->b_support_aspm = b_support_aspm;
+
+			/*if(priv->oem_id == RT_CID_TOSHIBA &&
+			   !priv->ndis_adapter.amd_l1_patch)
+			   b_support_backdoor = false; */
+
+			ppsc->b_support_backdoor = b_support_backdoor;
+
+			break;
+		}
+	case 2:
+		/*ASPM value set by chipset. */
+		if (pcibridge_vendor == PCI_BRIDGE_VENDOR_INTEL) {
+			bool b_support_aspm = true;
+			ppsc->b_support_aspm = b_support_aspm;
+		}
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+}
+
+static bool _rtl_pci_platform_switch_device_pci_aspm(
+			struct ieee80211_hw *hw,
+			u8 value)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	bool bresult = false;
+
+	value |= 0x40;
+
+	pci_write_config_byte(rtlpci->pdev, 0x80, value);
+
+	return bresult;
+}
+
+/*When we set 0x01 to enable clk request. Set 0x0 to disable clk req.*/
+static bool _rtl_pci_switch_clk_req(struct ieee80211_hw *hw, u8 value)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u8 buffer;
+	bool bresult = false;
+
+	buffer = value;
+
+	pci_write_config_byte(rtlpci->pdev, 0x81, value);
+	bresult = true;
+
+	return bresult;
+}
+
+/*Disable RTL8192SE ASPM & Disable Pci Bridge ASPM*/
+static void rtl_pci_disable_aspm(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u8 pcibridge_vendor = pcipriv->ndis_adapter.pcibridge_vendor;
+	u32 pcicfg_addrport = pcipriv->ndis_adapter.pcicfg_addrport;
+	u8 num4bytes = pcipriv->ndis_adapter.num4bytes;
+	/*Retrieve original configuration settings. */
+	u8 linkctrl_reg = pcipriv->ndis_adapter.linkctrl_reg;
+	u16 pcibridge_linkctrlreg = pcipriv->ndis_adapter.
+				pcibridge_linkctrlreg;
+	u16 aspmlevel = 0;
+
+	if (pcibridge_vendor == PCI_BRIDGE_VENDOR_UNKNOWN) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+			 ("PCI(Bridge) UNKNOWN.\n"));
+
+		return;
+	}
+
+	if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) {
+		RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_CLK_REQ);
+		_rtl_pci_switch_clk_req(hw, 0x0);
+	}
+
+	if (1) {
+		/*for promising device will in L0 state after an I/O. */
+		u8 tmp_u1b;
+		pci_read_config_byte(rtlpci->pdev, 0x80, &tmp_u1b);
+	}
+
+	/*Set corresponding value. */
+	aspmlevel |= BIT(0) | BIT(1);
+	linkctrl_reg &= ~aspmlevel;
+	pcibridge_linkctrlreg &= ~(BIT(0) | BIT(1));
+
+	_rtl_pci_platform_switch_device_pci_aspm(hw, linkctrl_reg);
+	udelay(50);
+
+	/*4 Disable Pci Bridge ASPM */
+	rtl_pci_raw_write_port_ulong(PCI_CONF_ADDRESS,
+				     pcicfg_addrport + (num4bytes << 2));
+	rtl_pci_raw_write_port_uchar(PCI_CONF_DATA, pcibridge_linkctrlreg);
+
+	udelay(50);
+
+}
+
+/*
+ *Enable RTL8192SE ASPM & Enable Pci Bridge ASPM for
+ *power saving We should follow the sequence to enable
+ *RTL8192SE first then enable Pci Bridge ASPM
+ *or the system will show bluescreen.
+ */
+static void rtl_pci_enable_aspm(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u8 pcibridge_busnum = pcipriv->ndis_adapter.pcibridge_busnum;
+	u8 pcibridge_devnum = pcipriv->ndis_adapter.pcibridge_devnum;
+	u8 pcibridge_funcnum = pcipriv->ndis_adapter.pcibridge_funcnum;
+	u8 pcibridge_vendor = pcipriv->ndis_adapter.pcibridge_vendor;
+	u32 pcicfg_addrport = pcipriv->ndis_adapter.pcicfg_addrport;
+	u8 num4bytes = pcipriv->ndis_adapter.num4bytes;
+	u16 aspmlevel;
+	u8 u_pcibridge_aspmsetting;
+	u8 u_device_aspmsetting;
+
+	if (pcibridge_vendor == PCI_BRIDGE_VENDOR_UNKNOWN) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+			 ("PCI(Bridge) UNKNOWN.\n"));
+		return;
+	}
+
+	/*4 Enable Pci Bridge ASPM */
+	rtl_pci_raw_write_port_ulong(PCI_CONF_ADDRESS,
+				     pcicfg_addrport + (num4bytes << 2));
+
+	u_pcibridge_aspmsetting =
+	    pcipriv->ndis_adapter.pcibridge_linkctrlreg |
+	    rtlpci->const_hostpci_aspm_setting;
+
+	if (pcibridge_vendor == PCI_BRIDGE_VENDOR_INTEL)
+		u_pcibridge_aspmsetting &= ~BIT(0);
+
+	rtl_pci_raw_write_port_uchar(PCI_CONF_DATA, u_pcibridge_aspmsetting);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 ("PlatformEnableASPM():PciBridge busnumber[%x], "
+		  "DevNumbe[%x], funcnumber[%x], Write reg[%x] = %x\n",
+		  pcibridge_busnum, pcibridge_devnum, pcibridge_funcnum,
+		  (pcipriv->ndis_adapter.pcibridge_pciehdr_offset + 0x10),
+		  u_pcibridge_aspmsetting));
+
+	udelay(50);
+
+	/*Get ASPM level (with/without Clock Req) */
+	aspmlevel = rtlpci->const_devicepci_aspm_setting;
+	u_device_aspmsetting = pcipriv->ndis_adapter.linkctrl_reg;
+
+	/*_rtl_pci_platform_switch_device_pci_aspm(dev,*/
+	/*(priv->ndis_adapter.linkctrl_reg | ASPMLevel)); */
+
+	u_device_aspmsetting |= aspmlevel;
+
+	_rtl_pci_platform_switch_device_pci_aspm(hw, u_device_aspmsetting);
+
+	if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) {
+		_rtl_pci_switch_clk_req(hw, (ppsc->reg_rfps_level &
+					     RT_RF_OFF_LEVL_CLK_REQ) ? 1 : 0);
+		RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_CLK_REQ);
+	}
+	udelay(200);
+}
+
+static bool rtl_pci_get_amd_l1_patch(struct ieee80211_hw *hw)
+{
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	u32 pcicfg_addrport = pcipriv->ndis_adapter.pcicfg_addrport;
+
+	bool status = false;
+	u8 offset_e0;
+	unsigned offset_e4;
+
+	rtl_pci_raw_write_port_ulong(PCI_CONF_ADDRESS,
+			pcicfg_addrport + 0xE0);
+	rtl_pci_raw_write_port_uchar(PCI_CONF_DATA, 0xA0);
+
+	rtl_pci_raw_write_port_ulong(PCI_CONF_ADDRESS,
+			pcicfg_addrport + 0xE0);
+	rtl_pci_raw_read_port_uchar(PCI_CONF_DATA, &offset_e0);
+
+	if (offset_e0 == 0xA0) {
+		rtl_pci_raw_write_port_ulong(PCI_CONF_ADDRESS,
+					     pcicfg_addrport + 0xE4);
+		rtl_pci_raw_read_port_ulong(PCI_CONF_DATA, &offset_e4);
+		if (offset_e4 & BIT(23))
+			status = true;
+	}
+
+	return status;
+}
+
+static void rtl_pci_get_linkcontrol_field(struct ieee80211_hw *hw)
+{
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	u8 capabilityoffset = pcipriv->ndis_adapter.pcibridge_pciehdr_offset;
+	u32 pcicfg_addrport = pcipriv->ndis_adapter.pcicfg_addrport;
+	u8 linkctrl_reg;
+	u8 num4bBytes;
+
+	num4bBytes = (capabilityoffset + 0x10) / 4;
+
+	/*Read  Link Control Register */
+	rtl_pci_raw_write_port_ulong(PCI_CONF_ADDRESS,
+				     pcicfg_addrport + (num4bBytes << 2));
+	rtl_pci_raw_read_port_uchar(PCI_CONF_DATA, &linkctrl_reg);
+
+	pcipriv->ndis_adapter.pcibridge_linkctrlreg = linkctrl_reg;
+}
+
+static void rtl_pci_parse_configuration(struct pci_dev *pdev,
+		struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+
+	u8 tmp;
+	int pos;
+	u8 linkctrl_reg;
+
+	/*Link Control Register */
+	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+	pci_read_config_byte(pdev, pos + PCI_EXP_LNKCTL, &linkctrl_reg);
+	pcipriv->ndis_adapter.linkctrl_reg = linkctrl_reg;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+		 ("Link Control Register =%x\n",
+		  pcipriv->ndis_adapter.linkctrl_reg));
+
+	pci_read_config_byte(pdev, 0x98, &tmp);
+	tmp |= BIT(4);
+	pci_write_config_byte(pdev, 0x98, tmp);
+
+	tmp = 0x17;
+	pci_write_config_byte(pdev, 0x70f, tmp);
+}
+
+static void _rtl_pci_initialize_adapter_common(struct ieee80211_hw *hw)
+{
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	_rtl_pci_update_default_setting(hw);
+
+	if (ppsc->reg_rfps_level & RT_RF_PS_LEVEL_ALWAYS_ASPM) {
+		/*Always enable ASPM & Clock Req. */
+		rtl_pci_enable_aspm(hw);
+		RT_SET_PS_LEVEL(ppsc, RT_RF_PS_LEVEL_ALWAYS_ASPM);
+	}
+
+}
+
+static void rtl_pci_init_aspm(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	/*close ASPM for AMD defaultly */
+	rtlpci->const_amdpci_aspm = 0;
+
+	/*
+	 * ASPM PS mode.
+	 * 0 - Disable ASPM,
+	 * 1 - Enable ASPM without Clock Req,
+	 * 2 - Enable ASPM with Clock Req,
+	 * 3 - Alwyas Enable ASPM with Clock Req,
+	 * 4 - Always Enable ASPM without Clock Req.
+	 * set defult to RTL8192CE:3 RTL8192E:2
+	 * */
+	rtlpci->const_pci_aspm = 3;
+
+	/*Setting for PCI-E device */
+	rtlpci->const_devicepci_aspm_setting = 0x03;
+
+	/*Setting for PCI-E bridge */
+	rtlpci->const_hostpci_aspm_setting = 0x02;
+
+	/*
+	 * In Hw/Sw Radio Off situation.
+	 * 0 - Default,
+	 * 1 - From ASPM setting without low Mac Pwr,
+	 * 2 - From ASPM setting with low Mac Pwr,
+	 * 3 - Bus D3
+	 * set default to RTL8192CE:0 RTL8192SE:2
+	 */
+	rtlpci->const_hwsw_rfoff_d3 = 0;
+
+	/*
+	 * This setting works for those device with
+	 * backdoor ASPM setting such as EPHY setting.
+	 * 0 - Not support ASPM,
+	 * 1 - Support ASPM,
+	 * 2 - According to chipset.
+	 */
+	rtlpci->const_support_pciaspm = 1;
+
+	_rtl_pci_initialize_adapter_common(hw);
+}
+
+static void _rtl_pci_io_handler_init(struct device *dev,
+				     struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->io.dev = dev;
+
+	rtlpriv->io.write8_async = pci_write8_async;
+	rtlpriv->io.write16_async = pci_write16_async;
+	rtlpriv->io.write32_async = pci_write32_async;
+
+	rtlpriv->io.read8_sync = pci_read8_sync;
+	rtlpriv->io.read16_sync = pci_read16_sync;
+	rtlpriv->io.read32_sync = pci_read32_sync;
+
+}
+
+static void _rtl_pci_io_handler_release(struct ieee80211_hw *hw)
+{
+}
+
+static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[prio];
+
+	while (skb_queue_len(&ring->queue)) {
+		struct rtl_tx_desc *entry = &ring->desc[ring->idx];
+		struct sk_buff *skb;
+		struct ieee80211_tx_info *info;
+
+		u8 own = (u8) rtlpriv->cfg->ops->get_desc((u8 *) entry, true,
+							  HW_DESC_OWN);
+
+		/*
+		 *beacon packet will only use the first
+		 *descriptor defautly,and the own may not
+		 *be cleared by the hardware
+		 */
+		if (own)
+			return;
+		ring->idx = (ring->idx + 1) % ring->entries;
+
+		skb = __skb_dequeue(&ring->queue);
+		pci_unmap_single(rtlpci->pdev,
+				 le32_to_cpu(rtlpriv->cfg->ops->
+					     get_desc((u8 *) entry, true,
+						      HW_DESC_TXBUFF_ADDR)),
+				 skb->len, PCI_DMA_TODEVICE);
+
+		RT_TRACE(rtlpriv, (COMP_INTR | COMP_SEND), DBG_TRACE,
+			 ("new ring->idx:%d, "
+			  "free: skb_queue_len:%d, free: seq:%x\n",
+			  ring->idx,
+			  skb_queue_len(&ring->queue),
+			  *(u16 *) (skb->data + 22)));
+
+		info = IEEE80211_SKB_CB(skb);
+		ieee80211_tx_info_clear_status(info);
+
+		info->flags |= IEEE80211_TX_STAT_ACK;
+		/*info->status.rates[0].count = 1; */
+
+		ieee80211_tx_status_irqsafe(hw, skb);
+
+		if ((ring->entries - skb_queue_len(&ring->queue))
+				== 2) {
+
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
+					("more desc left, wake"
+					 "skb_queue@%d,ring->idx = %d,"
+					 "skb_queue_len = 0x%d\n",
+					 prio, ring->idx,
+					 skb_queue_len(&ring->queue)));
+
+			ieee80211_wake_queue(hw,
+					skb_get_queue_mapping
+					(skb));
+		}
+
+		skb = NULL;
+	}
+
+	if (((rtlpriv->link_info.num_rx_inperiod +
+		rtlpriv->link_info.num_tx_inperiod) > 8) ||
+		(rtlpriv->link_info.num_rx_inperiod > 2)) {
+		rtl_lps_leave(hw);
+	}
+}
+
+static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	int rx_queue_idx = RTL_PCI_RX_MPDU_QUEUE;
+
+	struct ieee80211_rx_status rx_status = { 0 };
+	unsigned int count = rtlpci->rxringcount;
+	u8 own;
+	u8 tmp_one;
+	u32 bufferaddress;
+	bool unicast = false;
+
+	struct rtl_stats stats = {
+		.signal = 0,
+		.noise = -98,
+		.rate = 0,
+	};
+
+	/*RX NORMAL PKT */
+	while (count--) {
+		/*rx descriptor */
+		struct rtl_rx_desc *pdesc = &rtlpci->rx_ring[rx_queue_idx].desc[
+				rtlpci->rx_ring[rx_queue_idx].idx];
+		/*rx pkt */
+		struct sk_buff *skb = rtlpci->rx_ring[rx_queue_idx].rx_buf[
+				rtlpci->rx_ring[rx_queue_idx].idx];
+
+		own = (u8) rtlpriv->cfg->ops->get_desc((u8 *) pdesc,
+						       false, HW_DESC_OWN);
+
+		if (own) {
+			/*wait data to be filled by hardware */
+			return;
+		} else {
+			struct ieee80211_hdr *hdr;
+			u16 fc;
+			struct sk_buff *new_skb = NULL;
+
+			rtlpriv->cfg->ops->query_rx_desc(hw, &stats,
+							 &rx_status,
+							 (u8 *) pdesc, skb);
+
+			pci_unmap_single(rtlpci->pdev,
+					 *((dma_addr_t *) skb->cb),
+					 rtlpci->rxbuffersize,
+					 PCI_DMA_FROMDEVICE);
+
+			skb_put(skb, rtlpriv->cfg->ops->get_desc((u8 *) pdesc,
+							 false,
+							 HW_DESC_RXPKT_LEN));
+			skb_reserve(skb,
+				    stats.rx_drvinfo_size + stats.rx_bufshift);
+
+			/*
+			 *NOTICE This can not be use for mac80211,
+			 *this is done in mac80211 code,
+			 *if you done here sec DHCP will fail
+			 *skb_trim(skb, skb->len - 4);
+			 */
+
+			hdr = (struct ieee80211_hdr *)(skb->data);
+			fc = le16_to_cpu(hdr->frame_control);
+
+			if (!stats.b_crc) {
+				memcpy(IEEE80211_SKB_RXCB(skb), &rx_status,
+				       sizeof(rx_status));
+
+				if (is_broadcast_ether_addr(hdr->addr1))
+					;/*TODO*/
+				else {
+					if (is_multicast_ether_addr(hdr->addr1))
+						;/*TODO*/
+					else {
+						unicast = true;
+						rtlpriv->stats.rxbytesunicast +=
+						    skb->len;
+					}
+				}
+
+				rtl_is_special_data(hw, skb, false);
+
+				if (ieee80211_is_data(fc)) {
+					rtlpriv->cfg->ops->led_control(hw,
+							       LED_CTL_RX);
+
+					if (unicast)
+						rtlpriv->link_info.
+						    num_rx_inperiod++;
+				}
+
+				if (unlikely(!rtl_action_proc(hw, skb,
+				    false))) {
+					dev_kfree_skb_any(skb);
+				} else {
+					struct sk_buff *uskb = NULL;
+					u8 *pdata;
+					uskb = dev_alloc_skb(skb->len + 128);
+					memcpy(IEEE80211_SKB_RXCB(uskb),
+							&rx_status,
+							sizeof(rx_status));
+					pdata = (u8 *)skb_put(uskb, skb->len);
+					memcpy(pdata, skb->data, skb->len);
+					dev_kfree_skb_any(skb);
+
+					ieee80211_rx_irqsafe(hw, uskb);
+				}
+			} else {
+				dev_kfree_skb_any(skb);
+			}
+
+			if (((rtlpriv->link_info.num_rx_inperiod +
+				rtlpriv->link_info.num_tx_inperiod) > 8) ||
+				(rtlpriv->link_info.num_rx_inperiod > 2)) {
+				rtl_lps_leave(hw);
+			}
+
+			new_skb = dev_alloc_skb(rtlpci->rxbuffersize);
+			if (unlikely(!new_skb)) {
+				RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV),
+					 DBG_DMESG,
+					 ("can't alloc skb for rx\n"));
+				goto done;
+			}
+			skb = new_skb;
+			/*skb->dev = dev; */
+
+			rtlpci->rx_ring[rx_queue_idx].rx_buf[rtlpci->
+							     rx_ring
+							     [rx_queue_idx].
+							     idx] = skb;
+			*((dma_addr_t *) skb->cb) =
+			    pci_map_single(rtlpci->pdev, skb_tail_pointer(skb),
+					   rtlpci->rxbuffersize,
+					   PCI_DMA_FROMDEVICE);
+
+		}
+done:
+		bufferaddress = cpu_to_le32(*((dma_addr_t *) skb->cb));
+		tmp_one = 1;
+		rtlpriv->cfg->ops->set_desc((u8 *) pdesc, false,
+					    HW_DESC_RXBUFF_ADDR,
+					    (u8 *)&bufferaddress);
+		rtlpriv->cfg->ops->set_desc((u8 *)pdesc, false, HW_DESC_RXOWN,
+					    (u8 *)&tmp_one);
+		rtlpriv->cfg->ops->set_desc((u8 *)pdesc, false,
+					    HW_DESC_RXPKT_LEN,
+					    (u8 *)&rtlpci->rxbuffersize);
+
+		if (rtlpci->rx_ring[rx_queue_idx].idx ==
+		    rtlpci->rxringcount - 1)
+			rtlpriv->cfg->ops->set_desc((u8 *)pdesc, false,
+						    HW_DESC_RXERO,
+						    (u8 *)&tmp_one);
+
+		rtlpci->rx_ring[rx_queue_idx].idx =
+		    (rtlpci->rx_ring[rx_queue_idx].idx + 1) %
+		    rtlpci->rxringcount;
+	}
+
+}
+
+void _rtl_pci_tx_interrupt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	int prio;
+
+	for (prio = 0; prio < RTL_PCI_MAX_TX_QUEUE_COUNT; prio++) {
+		struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[prio];
+
+		while (skb_queue_len(&ring->queue)) {
+			struct rtl_tx_desc *entry = &ring->desc[ring->idx];
+			struct sk_buff *skb;
+			struct ieee80211_tx_info *info;
+			u8 own;
+
+			/*
+			 *beacon packet will only use the first
+			 *descriptor defautly, and the own may not
+			 *be cleared by the hardware, and
+			 *beacon will free in prepare beacon
+			 */
+			if (prio == BEACON_QUEUE || prio == TXCMD_QUEUE ||
+			    prio == HCCA_QUEUE)
+				break;
+
+			own = (u8)rtlpriv->cfg->ops->get_desc((u8 *)entry,
+							       true,
+							       HW_DESC_OWN);
+
+			if (own)
+				break;
+
+			skb = __skb_dequeue(&ring->queue);
+			pci_unmap_single(rtlpci->pdev,
+					 le32_to_cpu(rtlpriv->cfg->ops->
+						     get_desc((u8 *) entry,
+						     true,
+						     HW_DESC_TXBUFF_ADDR)),
+					 skb->len, PCI_DMA_TODEVICE);
+
+			ring->idx = (ring->idx + 1) % ring->entries;
+
+			info = IEEE80211_SKB_CB(skb);
+			ieee80211_tx_info_clear_status(info);
+
+			info->flags |= IEEE80211_TX_STAT_ACK;
+			/*info->status.rates[0].count = 1; */
+
+			ieee80211_tx_status_irqsafe(hw, skb);
+
+			if ((ring->entries - skb_queue_len(&ring->queue))
+			    == 2 && prio != BEACON_QUEUE) {
+				RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+					 ("more desc left, wake "
+					  "skb_queue@%d,ring->idx = %d,"
+					  "skb_queue_len = 0x%d\n",
+					  prio, ring->idx,
+					  skb_queue_len(&ring->queue)));
+
+				ieee80211_wake_queue(hw,
+						     skb_get_queue_mapping
+						     (skb));
+			}
+
+			skb = NULL;
+		}
+	}
+}
+
+static irqreturn_t _rtl_pci_interrupt(int irq, void *dev_id)
+{
+	struct ieee80211_hw *hw = dev_id;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	unsigned long flags;
+	u32 inta = 0;
+	u32 intb = 0;
+
+	if (rtlpci->irq_enabled == 0)
+		return IRQ_HANDLED;
+
+	spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
+
+	/*read ISR: 4/8bytes */
+	rtlpriv->cfg->ops->interrupt_recognized(hw, &inta, &intb);
+
+	/*Shared IRQ or HW disappared */
+	if (!inta || inta == 0xffff)
+		goto done;
+
+	/*<1> beacon related */
+	if (inta & rtlpriv->cfg->maps[RTL_IMR_TBDOK]) {
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+			 ("beacon ok interrupt!\n"));
+	}
+
+	if (unlikely(inta & rtlpriv->cfg->maps[RTL_IMR_TBDER])) {
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+			 ("beacon err interrupt!\n"));
+	}
+
+	if (inta & rtlpriv->cfg->maps[RTL_IMR_BDOK]) {
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+			 ("beacon interrupt!\n"));
+	}
+
+	if (inta & rtlpriv->cfg->maps[RTL_IMR_BcnInt]) {
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+			 ("prepare beacon for interrupt!\n"));
+		tasklet_schedule(&rtlpriv->works.irq_prepare_bcn_tasklet);
+	}
+
+	/*<3> Tx related */
+	if (unlikely(inta & rtlpriv->cfg->maps[RTL_IMR_TXFOVW]))
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, ("IMR_TXFOVW!\n"));
+
+	if (inta & rtlpriv->cfg->maps[RTL_IMR_MGNTDOK]) {
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+			 ("Manage ok interrupt!\n"));
+		_rtl_pci_tx_isr(hw, MGNT_QUEUE);
+	}
+
+	if (inta & rtlpriv->cfg->maps[RTL_IMR_HIGHDOK]) {
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+			 ("HIGH_QUEUE ok interrupt!\n"));
+		_rtl_pci_tx_isr(hw, HIGH_QUEUE);
+	}
+
+	if (inta & rtlpriv->cfg->maps[RTL_IMR_BKDOK]) {
+		rtlpriv->link_info.num_tx_inperiod++;
+
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+			 ("BK Tx OK interrupt!\n"));
+		_rtl_pci_tx_isr(hw, BK_QUEUE);
+	}
+
+	if (inta & rtlpriv->cfg->maps[RTL_IMR_BEDOK]) {
+		rtlpriv->link_info.num_tx_inperiod++;
+
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+			 ("BE TX OK interrupt!\n"));
+		_rtl_pci_tx_isr(hw, BE_QUEUE);
+	}
+
+	if (inta & rtlpriv->cfg->maps[RTL_IMR_VIDOK]) {
+		rtlpriv->link_info.num_tx_inperiod++;
+
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+			 ("VI TX OK interrupt!\n"));
+		_rtl_pci_tx_isr(hw, VI_QUEUE);
+	}
+
+	if (inta & rtlpriv->cfg->maps[RTL_IMR_VODOK]) {
+		rtlpriv->link_info.num_tx_inperiod++;
+
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE,
+			 ("Vo TX OK interrupt!\n"));
+		_rtl_pci_tx_isr(hw, VO_QUEUE);
+	}
+
+	/*<2> Rx related */
+	if (inta & rtlpriv->cfg->maps[RTL_IMR_ROK]) {
+		RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, ("Rx ok interrupt!\n"));
+		tasklet_schedule(&rtlpriv->works.irq_tasklet);
+	}
+
+	if (unlikely(inta & rtlpriv->cfg->maps[RTL_IMR_RDU])) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("rx descriptor unavailable!\n"));
+		tasklet_schedule(&rtlpriv->works.irq_tasklet);
+	}
+
+	if (unlikely(inta & rtlpriv->cfg->maps[RTL_IMR_RXFOVW])) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, ("rx overflow !\n"));
+		tasklet_schedule(&rtlpriv->works.irq_tasklet);
+	}
+
+	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+	return IRQ_HANDLED;
+
+done:
+	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+	return IRQ_HANDLED;
+}
+
+static void _rtl_pci_irq_tasklet(struct ieee80211_hw *hw)
+{
+	_rtl_pci_rx_interrupt(hw);
+}
+
+static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[BEACON_QUEUE];
+	struct ieee80211_hdr *hdr = NULL;
+	struct ieee80211_tx_info *info = NULL;
+	struct sk_buff *pskb = NULL;
+	struct rtl_tx_desc *pdesc = NULL;
+	unsigned int queue_index;
+	u8 temp_one = 1;
+
+	ring = &rtlpci->tx_ring[BEACON_QUEUE];
+	pskb = __skb_dequeue(&ring->queue);
+	if (pskb)
+		kfree_skb(pskb);
+
+	/*NB: the beacon data buffer must be 32-bit aligned. */
+	pskb = ieee80211_beacon_get(hw, mac->vif);
+	if (pskb == NULL)
+		return;
+	hdr = (struct ieee80211_hdr *)(pskb->data);
+	info = IEEE80211_SKB_CB(pskb);
+
+	queue_index = BEACON_QUEUE;
+
+	pdesc = &ring->desc[0];
+	rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *) pdesc,
+					info, pskb, queue_index);
+
+	__skb_queue_tail(&ring->queue, pskb);
+
+	rtlpriv->cfg->ops->set_desc((u8 *) pdesc, true, HW_DESC_OWN,
+				    (u8 *)&temp_one);
+
+	return;
+}
+
+static void _rtl_pci_init_trx_var(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u8 i;
+
+	for (i = 0; i < RTL_PCI_MAX_TX_QUEUE_COUNT; i++)
+		rtlpci->txringcount[i] = RT_TXDESC_NUM;
+
+	/*
+	 *we just alloc 2 desc for beacon queue,
+	 *because we just need first desc in hw beacon.
+	 */
+	rtlpci->txringcount[BEACON_QUEUE] = 2;
+
+	/*
+	 *BE queue need more descriptor for performance
+	 *consideration or, No more tx desc will happen,
+	 *and may cause mac80211 mem leakage.
+	 */
+	rtlpci->txringcount[BE_QUEUE] = RT_TXDESC_NUM_BE_QUEUE;
+
+	rtlpci->rxbuffersize = 9100;	/*2048/1024; */
+	rtlpci->rxringcount = RTL_PCI_MAX_RX_COUNT;	/*64; */
+}
+
+static void _rtl_pci_init_struct(struct ieee80211_hw *hw,
+		struct pci_dev *pdev)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	rtlpci->up_first_time = true;
+	rtlpci->being_init_adapter = false;
+
+	rtlhal->hw = hw;
+	rtlpci->pdev = pdev;
+
+	ppsc->b_inactiveps = false;
+	ppsc->b_leisure_ps = true;
+	ppsc->b_fwctrl_lps = true;
+	ppsc->b_reg_fwctrl_lps = 3;
+	ppsc->reg_max_lps_awakeintvl = 5;
+
+	if (ppsc->b_reg_fwctrl_lps == 1)
+		ppsc->fwctrl_psmode = FW_PS_MIN_MODE;
+	else if (ppsc->b_reg_fwctrl_lps == 2)
+		ppsc->fwctrl_psmode = FW_PS_MAX_MODE;
+	else if (ppsc->b_reg_fwctrl_lps == 3)
+		ppsc->fwctrl_psmode = FW_PS_DTIM_MODE;
+
+	/*Tx/Rx related var */
+	_rtl_pci_init_trx_var(hw);
+
+	 /*IBSS*/ mac->beacon_interval = 100;
+
+	 /*AMPDU*/ mac->min_space_cfg = 0;
+	mac->max_mss_density = 0;
+	/*set sane AMPDU defaults */
+	mac->current_ampdu_density = 7;
+	mac->current_ampdu_factor = 3;
+
+	 /*QOS*/ rtlpci->acm_method = eAcmWay2_SW;
+
+	/*task */
+	tasklet_init(&rtlpriv->works.irq_tasklet,
+		     (void (*)(unsigned long))_rtl_pci_irq_tasklet,
+		     (unsigned long)hw);
+	tasklet_init(&rtlpriv->works.irq_prepare_bcn_tasklet,
+		     (void (*)(unsigned long))_rtl_pci_prepare_bcn_tasklet,
+		     (unsigned long)hw);
+}
+
+static int _rtl_pci_init_tx_ring(struct ieee80211_hw *hw,
+				 unsigned int prio, unsigned int entries)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_tx_desc *ring;
+	dma_addr_t dma;
+	u32 nextdescaddress;
+	int i;
+
+	ring = pci_alloc_consistent(rtlpci->pdev,
+				    sizeof(*ring) * entries, &dma);
+
+	if (!ring || (unsigned long)ring & 0xFF) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Cannot allocate TX ring (prio = %d)\n", prio));
+		return -ENOMEM;
+	}
+
+	memset(ring, 0, sizeof(*ring) * entries);
+	rtlpci->tx_ring[prio].desc = ring;
+	rtlpci->tx_ring[prio].dma = dma;
+	rtlpci->tx_ring[prio].idx = 0;
+	rtlpci->tx_ring[prio].entries = entries;
+	skb_queue_head_init(&rtlpci->tx_ring[prio].queue);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 ("queue:%d, ring_addr:%p\n", prio, ring));
+
+	for (i = 0; i < entries; i++) {
+		nextdescaddress = cpu_to_le32((u32) dma +
+					      ((i + 1) % entries) *
+					      sizeof(*ring));
+
+		rtlpriv->cfg->ops->set_desc((u8 *)&(ring[i]),
+					    true, HW_DESC_TX_NEXTDESC_ADDR,
+					    (u8 *)&nextdescaddress);
+	}
+
+	return 0;
+}
+
+static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_rx_desc *entry = NULL;
+	int i, rx_queue_idx;
+	u8 tmp_one = 1;
+
+	/*
+	 *rx_queue_idx 0:RX_MPDU_QUEUE
+	 *rx_queue_idx 1:RX_CMD_QUEUE
+	 */
+	for (rx_queue_idx = 0; rx_queue_idx < RTL_PCI_MAX_RX_QUEUE;
+	     rx_queue_idx++) {
+		rtlpci->rx_ring[rx_queue_idx].desc =
+		    pci_alloc_consistent(rtlpci->pdev,
+					 sizeof(*rtlpci->rx_ring[rx_queue_idx].
+						desc) * rtlpci->rxringcount,
+					 &rtlpci->rx_ring[rx_queue_idx].dma);
+
+		if (!rtlpci->rx_ring[rx_queue_idx].desc ||
+		    (unsigned long)rtlpci->rx_ring[rx_queue_idx].desc & 0xFF) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("Cannot allocate RX ring\n"));
+			return -ENOMEM;
+		}
+
+		memset(rtlpci->rx_ring[rx_queue_idx].desc, 0,
+		       sizeof(*rtlpci->rx_ring[rx_queue_idx].desc) *
+		       rtlpci->rxringcount);
+
+		rtlpci->rx_ring[rx_queue_idx].idx = 0;
+
+		for (i = 0; i < rtlpci->rxringcount; i++) {
+			struct sk_buff *skb =
+			    dev_alloc_skb(rtlpci->rxbuffersize);
+			u32 bufferaddress;
+			entry = &rtlpci->rx_ring[rx_queue_idx].desc[i];
+			if (!skb)
+				return 0;
+
+			/*skb->dev = dev; */
+
+			rtlpci->rx_ring[rx_queue_idx].rx_buf[i] = skb;
+
+			/*
+			 *just set skb->cb to mapping addr
+			 *for pci_unmap_single use
+			 */
+			*((dma_addr_t *) skb->cb) =
+			    pci_map_single(rtlpci->pdev, skb_tail_pointer(skb),
+					   rtlpci->rxbuffersize,
+					   PCI_DMA_FROMDEVICE);
+
+			bufferaddress = cpu_to_le32(*((dma_addr_t *)skb->cb));
+			rtlpriv->cfg->ops->set_desc((u8 *)entry, false,
+						    HW_DESC_RXBUFF_ADDR,
+						    (u8 *)&bufferaddress);
+			rtlpriv->cfg->ops->set_desc((u8 *)entry, false,
+						    HW_DESC_RXPKT_LEN,
+						    (u8 *)&rtlpci->
+						    rxbuffersize);
+			rtlpriv->cfg->ops->set_desc((u8 *) entry, false,
+						    HW_DESC_RXOWN,
+						    (u8 *)&tmp_one);
+		}
+
+		rtlpriv->cfg->ops->set_desc((u8 *) entry, false,
+					    HW_DESC_RXERO, (u8 *)&tmp_one);
+	}
+	return 0;
+}
+
+static void _rtl_pci_free_tx_ring(struct ieee80211_hw *hw,
+		unsigned int prio)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[prio];
+
+	while (skb_queue_len(&ring->queue)) {
+		struct rtl_tx_desc *entry = &ring->desc[ring->idx];
+		struct sk_buff *skb = __skb_dequeue(&ring->queue);
+
+		pci_unmap_single(rtlpci->pdev,
+				 le32_to_cpu(rtlpriv->cfg->
+					     ops->get_desc((u8 *) entry, true,
+						   HW_DESC_TXBUFF_ADDR)),
+				 skb->len, PCI_DMA_TODEVICE);
+		kfree_skb(skb);
+		ring->idx = (ring->idx + 1) % ring->entries;
+	}
+
+	pci_free_consistent(rtlpci->pdev,
+			    sizeof(*ring->desc) * ring->entries,
+			    ring->desc, ring->dma);
+	ring->desc = NULL;
+}
+
+static void _rtl_pci_free_rx_ring(struct rtl_pci *rtlpci)
+{
+	int i, rx_queue_idx;
+
+	/*rx_queue_idx 0:RX_MPDU_QUEUE */
+	/*rx_queue_idx 1:RX_CMD_QUEUE */
+	for (rx_queue_idx = 0; rx_queue_idx < RTL_PCI_MAX_RX_QUEUE;
+	     rx_queue_idx++) {
+		for (i = 0; i < rtlpci->rxringcount; i++) {
+			struct sk_buff *skb =
+			    rtlpci->rx_ring[rx_queue_idx].rx_buf[i];
+			if (!skb)
+				continue;
+
+			pci_unmap_single(rtlpci->pdev,
+					 *((dma_addr_t *) skb->cb),
+					 rtlpci->rxbuffersize,
+					 PCI_DMA_FROMDEVICE);
+			kfree_skb(skb);
+		}
+
+		pci_free_consistent(rtlpci->pdev,
+				    sizeof(*rtlpci->rx_ring[rx_queue_idx].
+					   desc) * rtlpci->rxringcount,
+				    rtlpci->rx_ring[rx_queue_idx].desc,
+				    rtlpci->rx_ring[rx_queue_idx].dma);
+		rtlpci->rx_ring[rx_queue_idx].desc = NULL;
+	}
+}
+
+static int _rtl_pci_init_trx_ring(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	int ret;
+	int i;
+
+	ret = _rtl_pci_init_rx_ring(hw);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < RTL_PCI_MAX_TX_QUEUE_COUNT; i++) {
+		ret = _rtl_pci_init_tx_ring(hw, i,
+				 rtlpci->txringcount[i]);
+		if (ret)
+			goto err_free_rings;
+	}
+
+	return 0;
+
+err_free_rings:
+	_rtl_pci_free_rx_ring(rtlpci);
+
+	for (i = 0; i < RTL_PCI_MAX_TX_QUEUE_COUNT; i++)
+		if (rtlpci->tx_ring[i].desc)
+			_rtl_pci_free_tx_ring(hw, i);
+
+	return 1;
+}
+
+static int _rtl_pci_deinit_trx_ring(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u32 i;
+
+	/*free rx rings */
+	_rtl_pci_free_rx_ring(rtlpci);
+
+	/*free tx rings */
+	for (i = 0; i < RTL_PCI_MAX_TX_QUEUE_COUNT; i++)
+		_rtl_pci_free_tx_ring(hw, i);
+
+	return 0;
+}
+
+int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	int i, rx_queue_idx;
+	unsigned long flags;
+	u8 tmp_one = 1;
+
+	/*rx_queue_idx 0:RX_MPDU_QUEUE */
+	/*rx_queue_idx 1:RX_CMD_QUEUE */
+	for (rx_queue_idx = 0; rx_queue_idx < RTL_PCI_MAX_RX_QUEUE;
+	     rx_queue_idx++) {
+		/*
+		 *force the rx_ring[RX_MPDU_QUEUE/
+		 *RX_CMD_QUEUE].idx to the first one
+		 */
+		if (rtlpci->rx_ring[rx_queue_idx].desc) {
+			struct rtl_rx_desc *entry = NULL;
+
+			for (i = 0; i < rtlpci->rxringcount; i++) {
+				entry = &rtlpci->rx_ring[rx_queue_idx].desc[i];
+				rtlpriv->cfg->ops->set_desc((u8 *) entry,
+							    false,
+							    HW_DESC_RXOWN,
+							    (u8 *)&tmp_one);
+			}
+			rtlpci->rx_ring[rx_queue_idx].idx = 0;
+		}
+	}
+
+	/*
+	 *after reset, release previous pending packet,
+	 *and force the  tx idx to the first one
+	 */
+	spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
+	for (i = 0; i < RTL_PCI_MAX_TX_QUEUE_COUNT; i++) {
+		if (rtlpci->tx_ring[i].desc) {
+			struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[i];
+
+			while (skb_queue_len(&ring->queue)) {
+				struct rtl_tx_desc *entry =
+				    &ring->desc[ring->idx];
+				struct sk_buff *skb =
+				    __skb_dequeue(&ring->queue);
+
+				pci_unmap_single(rtlpci->pdev,
+						 le32_to_cpu(rtlpriv->cfg->ops->
+							 get_desc((u8 *)
+							 entry,
+							 true,
+							 HW_DESC_TXBUFF_ADDR)),
+						 skb->len, PCI_DMA_TODEVICE);
+				kfree_skb(skb);
+				ring->idx = (ring->idx + 1) % ring->entries;
+			}
+			ring->idx = 0;
+		}
+	}
+
+	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+	return 0;
+}
+
+unsigned int _rtl_mac_to_hwqueue(u16 fc,
+		unsigned int mac80211_queue_index)
+{
+	unsigned int hw_queue_index;
+
+	if (unlikely(ieee80211_is_beacon(fc))) {
+		hw_queue_index = BEACON_QUEUE;
+		goto out;
+	}
+
+	if (ieee80211_is_mgmt(fc)) {
+		hw_queue_index = MGNT_QUEUE;
+		goto out;
+	}
+
+	switch (mac80211_queue_index) {
+	case 0:
+		hw_queue_index = VO_QUEUE;
+		break;
+	case 1:
+		hw_queue_index = VI_QUEUE;
+		break;
+	case 2:
+		hw_queue_index = BE_QUEUE;;
+		break;
+	case 3:
+		hw_queue_index = BK_QUEUE;
+		break;
+	default:
+		hw_queue_index = BE_QUEUE;
+		RT_ASSERT(false, ("QSLT_BE queue, skb_queue:%d\n",
+				  mac80211_queue_index));
+		break;
+	}
+
+out:
+	return hw_queue_index;
+}
+
+int rtl_pci_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct rtl8192_tx_ring *ring;
+	struct rtl_tx_desc *pdesc;
+	u8 idx;
+	unsigned int queue_index, hw_queue;
+	unsigned long flags;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
+	u16 fc = le16_to_cpu(hdr->frame_control);
+	u8 *pda_addr = hdr->addr1;
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	/*ssn */
+	u8 *qc = NULL;
+	u8 tid = 0;
+	u16 seq_number = 0;
+	u8 own;
+	u8 temp_one = 1;
+
+	if (ieee80211_is_mgmt(fc))
+		rtl_tx_mgmt_proc(hw, skb);
+	rtl_action_proc(hw, skb, true);
+
+	queue_index = skb_get_queue_mapping(skb);
+	hw_queue = _rtl_mac_to_hwqueue(fc, queue_index);
+
+	if (is_multicast_ether_addr(pda_addr))
+		rtlpriv->stats.txbytesmulticast += skb->len;
+	else if (is_broadcast_ether_addr(pda_addr))
+		rtlpriv->stats.txbytesbroadcast += skb->len;
+	else
+		rtlpriv->stats.txbytesunicast += skb->len;
+
+	spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
+
+	ring = &rtlpci->tx_ring[hw_queue];
+	if (hw_queue != BEACON_QUEUE)
+		idx = (ring->idx + skb_queue_len(&ring->queue)) %
+				ring->entries;
+	else
+		idx = 0;
+
+	pdesc = &ring->desc[idx];
+	own = (u8) rtlpriv->cfg->ops->get_desc((u8 *) pdesc,
+			true, HW_DESC_OWN);
+
+	if ((own == 1) && (hw_queue != BEACON_QUEUE)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("No more TX desc@%d, ring->idx = %d,"
+			  "idx = %d, skb_queue_len = 0x%d\n",
+			  hw_queue, ring->idx, idx,
+			  skb_queue_len(&ring->queue)));
+
+		spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+		return skb->len;
+	}
+
+	/*
+	 *if(ieee80211_is_nullfunc(fc)) {
+	 *      spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+	 *      return 1;
+	 *}
+	 */
+
+	if (ieee80211_is_data_qos(fc)) {
+		qc = ieee80211_get_qos_ctl(hdr);
+		tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+
+		seq_number = mac->tids[tid].seq_number;
+		seq_number &= IEEE80211_SCTL_SEQ;
+		/*
+		 *hdr->seq_ctrl = hdr->seq_ctrl &
+		 *cpu_to_le16(IEEE80211_SCTL_FRAG);
+		 *hdr->seq_ctrl |= cpu_to_le16(seq_number);
+		 */
+
+		seq_number += 1;
+	}
+
+	if (ieee80211_is_data(fc))
+		rtlpriv->cfg->ops->led_control(hw, LED_CTL_TX);
+
+	rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *) pdesc,
+					info, skb, hw_queue);
+
+	__skb_queue_tail(&ring->queue, skb);
+
+	rtlpriv->cfg->ops->set_desc((u8 *) pdesc, true,
+				    HW_DESC_OWN, (u8 *)&temp_one);
+
+	if (!ieee80211_has_morefrags(hdr->frame_control)) {
+		if (qc)
+			mac->tids[tid].seq_number = seq_number;
+	}
+
+	if ((ring->entries - skb_queue_len(&ring->queue)) < 2 &&
+	    hw_queue != BEACON_QUEUE) {
+
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
+			 ("less desc left, stop skb_queue@%d, "
+			  "ring->idx = %d,"
+			  "idx = %d, skb_queue_len = 0x%d\n",
+			  hw_queue, ring->idx, idx,
+			  skb_queue_len(&ring->queue)));
+
+		ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
+	}
+
+	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+	rtlpriv->cfg->ops->tx_polling(hw, hw_queue);
+
+	return 0;
+}
+
+void rtl_pci_deinit(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	_rtl_pci_deinit_trx_ring(hw);
+
+	synchronize_irq(rtlpci->pdev->irq);
+	tasklet_kill(&rtlpriv->works.irq_tasklet);
+
+	flush_workqueue(rtlpriv->works.rtl_wq);
+	destroy_workqueue(rtlpriv->works.rtl_wq);
+
+}
+
+int rtl_pci_init(struct ieee80211_hw *hw, struct pci_dev *pdev)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	int err;
+
+	_rtl_pci_init_struct(hw, pdev);
+
+	err = _rtl_pci_init_trx_ring(hw);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("tx ring initialization failed"));
+		return err;
+	}
+
+	return 1;
+}
+
+int rtl_pci_start(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	int err;
+
+	rtl_pci_reset_trx_ring(hw);
+
+	rtlpci->driver_is_goingto_unload = false;
+	err = rtlpriv->cfg->ops->hw_init(hw);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+			 ("Failed to config hardware!\n"));
+		return err;
+	}
+
+	rtlpriv->cfg->ops->enable_interrupt(hw);
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("enable_interrupt OK\n"));
+
+	rtl_init_rx_config(hw);
+
+	/*should after adapter start and interrupt enable. */
+	set_hal_start(rtlhal);
+
+	RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+
+	rtlpci->up_first_time = false;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("OK\n"));
+	return 0;
+}
+
+void rtl_pci_stop(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	unsigned long flags;
+	u8 RFInProgressTimeOut = 0;
+
+	/*
+	 *should before disable interrrupt&adapter
+	 *and will do it immediately.
+	 */
+	set_hal_stop(rtlhal);
+
+	rtlpriv->cfg->ops->disable_interrupt(hw);
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flags);
+	while (ppsc->rfchange_inprogress) {
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flags);
+		if (RFInProgressTimeOut > 100) {
+			spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flags);
+			break;
+		}
+		mdelay(1);
+		RFInProgressTimeOut++;
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flags);
+	}
+	ppsc->rfchange_inprogress = true;
+	spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flags);
+
+	rtlpci->driver_is_goingto_unload = true;
+	rtlpriv->cfg->ops->hw_disable(hw);
+	rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flags);
+	ppsc->rfchange_inprogress = false;
+	spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flags);
+
+	rtl_pci_enable_aspm(hw);
+}
+
+static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
+		struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct pci_dev *bridge_pdev = pdev->bus->self;
+	u16 venderid;
+	u16 deviceid;
+	u8 revisionid;
+	u16 irqline;
+	u8 tmp;
+
+	venderid = pdev->vendor;
+	deviceid = pdev->device;
+	pci_read_config_byte(pdev, 0x8, &revisionid);
+	pci_read_config_word(pdev, 0x3C, &irqline);
+
+	if (deviceid == RTL_PCI_8192_DID ||
+	    deviceid == RTL_PCI_0044_DID ||
+	    deviceid == RTL_PCI_0047_DID ||
+	    deviceid == RTL_PCI_8192SE_DID ||
+	    deviceid == RTL_PCI_8174_DID ||
+	    deviceid == RTL_PCI_8173_DID ||
+	    deviceid == RTL_PCI_8172_DID ||
+	    deviceid == RTL_PCI_8171_DID) {
+		switch (revisionid) {
+		case RTL_PCI_REVISION_ID_8192PCIE:
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+				 ("8192 PCI-E is found - "
+				  "vid/did=%x/%x\n", venderid, deviceid));
+			rtlhal->hw_type = HARDWARE_TYPE_RTL8192E;
+			break;
+		case RTL_PCI_REVISION_ID_8192SE:
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+				 ("8192SE is found - "
+				  "vid/did=%x/%x\n", venderid, deviceid));
+			rtlhal->hw_type = HARDWARE_TYPE_RTL8192SE;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+				 ("Err: Unknown device - "
+				  "vid/did=%x/%x\n", venderid, deviceid));
+			rtlhal->hw_type = HARDWARE_TYPE_RTL8192SE;
+			break;
+
+		}
+	} else if (deviceid == RTL_PCI_8192CET_DID ||
+		   deviceid == RTL_PCI_8192CE_DID ||
+		   deviceid == RTL_PCI_8191CE_DID ||
+		   deviceid == RTL_PCI_8188CE_DID) {
+		rtlhal->hw_type = HARDWARE_TYPE_RTL8192CE;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+			 ("8192C PCI-E is found - "
+			  "vid/did=%x/%x\n", venderid, deviceid));
+	} else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("Err: Unknown device -"
+			  " vid/did=%x/%x\n", venderid, deviceid));
+
+		rtlhal->hw_type = RTL_DEFAULT_HARDWARE_TYPE;
+	}
+
+	/*find bus info */
+	pcipriv->ndis_adapter.busnumber = pdev->bus->number;
+	pcipriv->ndis_adapter.devnumber = PCI_SLOT(pdev->devfn);
+	pcipriv->ndis_adapter.funcnumber = PCI_FUNC(pdev->devfn);
+
+	/*find bridge info */
+	pcipriv->ndis_adapter.pcibridge_vendorid = bridge_pdev->vendor;
+	for (tmp = 0; tmp < PCI_BRIDGE_VENDOR_MAX; tmp++) {
+		if (bridge_pdev->vendor == pcibridge_vendors[tmp]) {
+			pcipriv->ndis_adapter.pcibridge_vendor = tmp;
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+				 ("Pci Bridge Vendor is found index: %d\n",
+				  tmp));
+			break;
+		}
+	}
+
+	if (pcipriv->ndis_adapter.pcibridge_vendor !=
+		PCI_BRIDGE_VENDOR_UNKNOWN) {
+		pcipriv->ndis_adapter.pcibridge_busnum =
+		    bridge_pdev->bus->number;
+		pcipriv->ndis_adapter.pcibridge_devnum =
+		    PCI_SLOT(bridge_pdev->devfn);
+		pcipriv->ndis_adapter.pcibridge_funcnum =
+		    PCI_FUNC(bridge_pdev->devfn);
+		pcipriv->ndis_adapter.pcibridge_pciehdr_offset =
+		    pci_pcie_cap(bridge_pdev);
+		pcipriv->ndis_adapter.pcicfg_addrport =
+		    (pcipriv->ndis_adapter.pcibridge_busnum << 16) |
+		    (pcipriv->ndis_adapter.pcibridge_devnum << 11) |
+		    (pcipriv->ndis_adapter.pcibridge_funcnum << 8) | (1 << 31);
+		pcipriv->ndis_adapter.num4bytes =
+		    (pcipriv->ndis_adapter.pcibridge_pciehdr_offset + 0x10) / 4;
+
+		rtl_pci_get_linkcontrol_field(hw);
+
+		if (pcipriv->ndis_adapter.pcibridge_vendor ==
+		    PCI_BRIDGE_VENDOR_AMD) {
+			pcipriv->ndis_adapter.amd_l1_patch =
+			    rtl_pci_get_amd_l1_patch(hw);
+		}
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 ("pcidev busnumber:devnumber:funcnumber:"
+		  "vendor:link_ctl %d:%d:%d:%x:%x\n",
+		  pcipriv->ndis_adapter.busnumber,
+		  pcipriv->ndis_adapter.devnumber,
+		  pcipriv->ndis_adapter.funcnumber,
+		  pdev->vendor, pcipriv->ndis_adapter.linkctrl_reg));
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 ("pci_bridge busnumber:devnumber:funcnumber:vendor:"
+		  "pcie_cap:link_ctl_reg:amd %d:%d:%d:%x:%x:%x:%x\n",
+		  pcipriv->ndis_adapter.pcibridge_busnum,
+		  pcipriv->ndis_adapter.pcibridge_devnum,
+		  pcipriv->ndis_adapter.pcibridge_funcnum,
+		  pcibridge_vendors[pcipriv->ndis_adapter.pcibridge_vendor],
+		  pcipriv->ndis_adapter.pcibridge_pciehdr_offset,
+		  pcipriv->ndis_adapter.pcibridge_linkctrlreg,
+		  pcipriv->ndis_adapter.amd_l1_patch));
+
+	rtl_pci_parse_configuration(pdev, hw);
+
+	return true;
+}
+
+int __devinit rtl_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *id)
+{
+	struct ieee80211_hw *hw = NULL;
+
+	struct rtl_priv *rtlpriv = NULL;
+	struct rtl_pci_priv *pcipriv = NULL;
+	struct rtl_pci *rtlpci;
+	unsigned long pmem_start, pmem_len, pmem_flags;
+	int err;
+
+	err = pci_enable_device(pdev);
+	if (err) {
+		RT_ASSERT(false,
+			  ("%s : Cannot enable new PCI device\n",
+			   pci_name(pdev)));
+		return err;
+	}
+
+	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+		if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
+			RT_ASSERT(false, ("Unable to obtain 32bit DMA "
+					  "for consistent allocations\n"));
+			pci_disable_device(pdev);
+			return -ENOMEM;
+		}
+	}
+
+	pci_set_master(pdev);
+
+	hw = ieee80211_alloc_hw(sizeof(struct rtl_pci_priv) +
+				sizeof(struct rtl_priv), &rtl_ops);
+	if (!hw) {
+		RT_ASSERT(false,
+			  ("%s : ieee80211 alloc failed\n", pci_name(pdev)));
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	SET_IEEE80211_DEV(hw, &pdev->dev);
+	pci_set_drvdata(pdev, hw);
+
+	rtlpriv = hw->priv;
+	pcipriv = (void *)rtlpriv->priv;
+	pcipriv->dev.pdev = pdev;
+
+	/*
+	 *init dbgp flags before all
+	 *other functions, because we will
+	 *use it in other funtions like
+	 *RT_TRACE/RT_PRINT/RTL_PRINT_DATA
+	 *you can not use these macro
+	 *before this
+	 */
+	rtl_dbgp_flag_init(hw);
+
+	/* MEM map */
+	err = pci_request_regions(pdev, KBUILD_MODNAME);
+	if (err) {
+		RT_ASSERT(false, ("Can't obtain PCI resources\n"));
+		return err;
+	}
+
+	pmem_start = pci_resource_start(pdev, 2);
+	pmem_len = pci_resource_len(pdev, 2);
+	pmem_flags = pci_resource_flags(pdev, 2);
+
+	/*shared mem start */
+	rtlpriv->io.pci_mem_start =
+			(unsigned long)pci_iomap(pdev, 2, pmem_len);
+	if (rtlpriv->io.pci_mem_start == 0) {
+		RT_ASSERT(false, ("Can't map PCI mem\n"));
+		goto fail2;
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 ("mem mapped space: start: 0x%08lx len:%08lx "
+		  "flags:%08lx, after map:0x%08lx\n",
+		  pmem_start, pmem_len, pmem_flags,
+		  rtlpriv->io.pci_mem_start));
+
+	/* Disable Clk Request */
+	pci_write_config_byte(pdev, 0x81, 0);
+	/* leave D3 mode */
+	pci_write_config_byte(pdev, 0x44, 0);
+	pci_write_config_byte(pdev, 0x04, 0x06);
+	pci_write_config_byte(pdev, 0x04, 0x07);
+
+	/* init cfg & intf_ops */
+	rtlpriv->rtlhal.interface = INTF_PCI;
+	rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_data);
+	rtlpriv->intf_ops = &rtl_pci_ops;
+
+	/* find adapter */
+	_rtl_pci_find_adapter(pdev, hw);
+
+	/* Init IO handler */
+	_rtl_pci_io_handler_init(&pdev->dev, hw);
+
+	/*like read eeprom and so on */
+	rtlpriv->cfg->ops->read_eeprom_info(hw);
+
+	if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Can't init_sw_vars.\n"));
+		goto fail3;
+	}
+
+	rtlpriv->cfg->ops->init_sw_leds(hw);
+
+	/*aspm */
+	rtl_pci_init_aspm(hw);
+
+	/* Init mac80211 sw */
+	err = rtl_init_core(hw);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Can't allocate sw for mac80211.\n"));
+		goto fail3;
+	}
+
+	/* Init PCI sw */
+	err = !rtl_pci_init(hw, pdev);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Failed to init PCI.\n"));
+		goto fail3;
+	}
+
+	err = ieee80211_register_hw(hw);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Can't register mac80211 hw.\n"));
+		goto fail3;
+	} else {
+		rtlpriv->mac80211.mac80211_registered = 1;
+	}
+
+	err = sysfs_create_group(&pdev->dev.kobj, &rtl_attribute_group);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("failed to create sysfs device attributes\n"));
+		goto fail3;
+	}
+
+	/*init rfkill */
+	rtl_init_rfkill(hw);
+
+	rtlpci = rtl_pcidev(pcipriv);
+	err = request_irq(rtlpci->pdev->irq, &_rtl_pci_interrupt,
+			  IRQF_SHARED, KBUILD_MODNAME, hw);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+			 ("%s: failed to register IRQ handler\n",
+			  wiphy_name(hw->wiphy)));
+		goto fail3;
+	} else {
+		rtlpci->irq_alloc = 1;
+	}
+
+	set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status);
+	return 0;
+
+fail3:
+	pci_set_drvdata(pdev, NULL);
+	rtl_deinit_core(hw);
+	_rtl_pci_io_handler_release(hw);
+	ieee80211_free_hw(hw);
+
+	if (rtlpriv->io.pci_mem_start != 0)
+		pci_iounmap(pdev, (void *)rtlpriv->io.pci_mem_start);
+
+fail2:
+	pci_release_regions(pdev);
+
+fail1:
+
+	pci_disable_device(pdev);
+
+	return -ENODEV;
+
+}
+EXPORT_SYMBOL(rtl_pci_probe);
+
+void rtl_pci_disconnect(struct pci_dev *pdev)
+{
+	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(pcipriv);
+	struct rtl_mac *rtlmac = rtl_mac(rtlpriv);
+
+	clear_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status);
+
+	sysfs_remove_group(&pdev->dev.kobj, &rtl_attribute_group);
+
+	/*ieee80211_unregister_hw will call ops_stop */
+	if (rtlmac->mac80211_registered == 1) {
+		ieee80211_unregister_hw(hw);
+		rtlmac->mac80211_registered = 0;
+	} else {
+		rtl_deinit_deferred_work(hw);
+		rtlpriv->intf_ops->adapter_stop(hw);
+	}
+
+	/*deinit rfkill */
+	rtl_deinit_rfkill(hw);
+
+	rtl_pci_deinit(hw);
+	rtl_deinit_core(hw);
+	rtlpriv->cfg->ops->deinit_sw_leds(hw);
+	_rtl_pci_io_handler_release(hw);
+	rtlpriv->cfg->ops->deinit_sw_vars(hw);
+
+	if (rtlpci->irq_alloc) {
+		free_irq(rtlpci->pdev->irq, hw);
+		rtlpci->irq_alloc = 0;
+	}
+
+	if (rtlpriv->io.pci_mem_start != 0) {
+		pci_iounmap(pdev, (void *)rtlpriv->io.pci_mem_start);
+		pci_release_regions(pdev);
+	}
+
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+
+	ieee80211_free_hw(hw);
+}
+EXPORT_SYMBOL(rtl_pci_disconnect);
+
+/***************************************
+kernel pci power state define:
+PCI_D0         ((pci_power_t __force) 0)
+PCI_D1         ((pci_power_t __force) 1)
+PCI_D2         ((pci_power_t __force) 2)
+PCI_D3hot      ((pci_power_t __force) 3)
+PCI_D3cold     ((pci_power_t __force) 4)
+PCI_UNKNOWN    ((pci_power_t __force) 5)
+
+This function is called when system
+goes into suspend state mac80211 will
+call rtl_mac_stop() from the mac80211
+suspend function first, So there is
+no need to call hw_disable here.
+****************************************/
+int rtl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+EXPORT_SYMBOL(rtl_pci_suspend);
+
+int rtl_pci_resume(struct pci_dev *pdev)
+{
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		RT_ASSERT(false, ("ERR: <======\n"));
+		return ret;
+	}
+
+	pci_restore_state(pdev);
+
+	return 0;
+}
+EXPORT_SYMBOL(rtl_pci_resume);
+
+struct rtl_intf_ops rtl_pci_ops = {
+	.adapter_start = rtl_pci_start,
+	.adapter_stop = rtl_pci_stop,
+	.adapter_tx = rtl_pci_tx,
+	.reset_trx_ring = rtl_pci_reset_trx_ring,
+
+	.disable_aspm = rtl_pci_disable_aspm,
+	.enable_aspm = rtl_pci_enable_aspm,
+};
diff --git a/drivers/net/wireless/rtlwifi/pci.h b/drivers/net/wireless/rtlwifi/pci.h
new file mode 100644
index 00000000000..d36a6693995
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/pci.h
@@ -0,0 +1,302 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_PCI_H__
+#define __RTL_PCI_H__
+
+#include <linux/pci.h>
+/*
+1: MSDU packet queue,
+2: Rx Command Queue
+*/
+#define RTL_PCI_RX_MPDU_QUEUE			0
+#define RTL_PCI_RX_CMD_QUEUE			1
+#define RTL_PCI_MAX_RX_QUEUE			2
+
+#define RTL_PCI_MAX_RX_COUNT			64
+#define RTL_PCI_MAX_TX_QUEUE_COUNT		9
+
+#define RT_TXDESC_NUM				128
+#define RT_TXDESC_NUM_BE_QUEUE			256
+
+#define BK_QUEUE				0
+#define BE_QUEUE				1
+#define VI_QUEUE				2
+#define VO_QUEUE				3
+#define BEACON_QUEUE				4
+#define TXCMD_QUEUE				5
+#define MGNT_QUEUE				6
+#define HIGH_QUEUE				7
+#define HCCA_QUEUE				8
+
+#define RTL_PCI_DEVICE(vend, dev, cfg)  \
+	.vendor = (vend), \
+	.device = (dev), \
+	.subvendor = PCI_ANY_ID, \
+	.subdevice = PCI_ANY_ID,\
+	.driver_data = (kernel_ulong_t)&(cfg)
+
+#define INTEL_VENDOR_ID				0x8086
+#define SIS_VENDOR_ID				0x1039
+#define ATI_VENDOR_ID				0x1002
+#define ATI_DEVICE_ID				0x7914
+#define AMD_VENDOR_ID				0x1022
+
+#define PCI_MAX_BRIDGE_NUMBER			255
+#define PCI_MAX_DEVICES				32
+#define PCI_MAX_FUNCTION			8
+
+#define PCI_CONF_ADDRESS	0x0CF8	/*PCI Configuration Space Address */
+#define PCI_CONF_DATA		0x0CFC	/*PCI Configuration Space Data */
+
+#define PCI_CLASS_BRIDGE_DEV		0x06
+#define PCI_SUBCLASS_BR_PCI_TO_PCI	0x04
+#define PCI_CAPABILITY_ID_PCI_EXPRESS	0x10
+#define PCI_CAP_ID_EXP			0x10
+
+#define U1DONTCARE			0xFF
+#define U2DONTCARE			0xFFFF
+#define U4DONTCARE			0xFFFFFFFF
+
+#define RTL_PCI_8192_DID	0x8192	/*8192 PCI-E */
+#define RTL_PCI_8192SE_DID	0x8192	/*8192 SE */
+#define RTL_PCI_8174_DID	0x8174	/*8192 SE */
+#define RTL_PCI_8173_DID	0x8173	/*8191 SE Crab */
+#define RTL_PCI_8172_DID	0x8172	/*8191 SE RE */
+#define RTL_PCI_8171_DID	0x8171	/*8191 SE Unicron */
+#define RTL_PCI_0045_DID	0x0045	/*8190 PCI for Ceraga */
+#define RTL_PCI_0046_DID	0x0046	/*8190 Cardbus for Ceraga */
+#define RTL_PCI_0044_DID	0x0044	/*8192e PCIE for Ceraga */
+#define RTL_PCI_0047_DID	0x0047	/*8192e Express Card for Ceraga */
+#define RTL_PCI_700F_DID	0x700F
+#define RTL_PCI_701F_DID	0x701F
+#define RTL_PCI_DLINK_DID	0x3304
+#define RTL_PCI_8192CET_DID	0x8191	/*8192ce */
+#define RTL_PCI_8192CE_DID	0x8178	/*8192ce */
+#define RTL_PCI_8191CE_DID	0x8177	/*8192ce */
+#define RTL_PCI_8188CE_DID	0x8176	/*8192ce */
+#define RTL_PCI_8192CU_DID	0x8191	/*8192ce */
+#define RTL_PCI_8192DE_DID	0x092D	/*8192ce */
+#define RTL_PCI_8192DU_DID	0x092D	/*8192ce */
+
+/*8192 support 16 pages of IO registers*/
+#define RTL_MEM_MAPPED_IO_RANGE_8190PCI		0x1000
+#define RTL_MEM_MAPPED_IO_RANGE_8192PCIE	0x4000
+#define RTL_MEM_MAPPED_IO_RANGE_8192SE		0x4000
+#define RTL_MEM_MAPPED_IO_RANGE_8192CE		0x4000
+#define RTL_MEM_MAPPED_IO_RANGE_8192DE		0x4000
+
+#define RTL_PCI_REVISION_ID_8190PCI		0x00
+#define RTL_PCI_REVISION_ID_8192PCIE		0x01
+#define RTL_PCI_REVISION_ID_8192SE		0x10
+#define RTL_PCI_REVISION_ID_8192CE		0x1
+#define RTL_PCI_REVISION_ID_8192DE		0x0
+
+#define RTL_DEFAULT_HARDWARE_TYPE	HARDWARE_TYPE_RTL8192CE
+
+enum pci_bridge_vendor {
+	PCI_BRIDGE_VENDOR_INTEL = 0x0,	/*0b'0000,0001 */
+	PCI_BRIDGE_VENDOR_ATI,		/*0b'0000,0010*/
+	PCI_BRIDGE_VENDOR_AMD,		/*0b'0000,0100*/
+	PCI_BRIDGE_VENDOR_SIS,		/*0b'0000,1000*/
+	PCI_BRIDGE_VENDOR_UNKNOWN,	/*0b'0100,0000*/
+	PCI_BRIDGE_VENDOR_MAX,
+};
+
+struct rtl_rx_desc {
+	u32 dword[8];
+} __packed;
+
+struct rtl_tx_desc {
+	u32 dword[16];
+} __packed;
+
+struct rtl_tx_cmd_desc {
+	u32 dword[16];
+} __packed;
+
+struct rtl8192_tx_ring {
+	struct rtl_tx_desc *desc;
+	dma_addr_t dma;
+	unsigned int idx;
+	unsigned int entries;
+	struct sk_buff_head queue;
+};
+
+struct rtl8192_rx_ring {
+	struct rtl_rx_desc *desc;
+	dma_addr_t dma;
+	unsigned int idx;
+	struct sk_buff *rx_buf[RTL_PCI_MAX_RX_COUNT];
+};
+
+struct rtl_pci {
+	struct pci_dev *pdev;
+
+	bool driver_is_goingto_unload;
+	bool up_first_time;
+	bool being_init_adapter;
+	bool irq_enabled;
+
+	/*Tx */
+	struct rtl8192_tx_ring tx_ring[RTL_PCI_MAX_TX_QUEUE_COUNT];
+	int txringcount[RTL_PCI_MAX_TX_QUEUE_COUNT];
+	u32 transmit_config;
+
+	/*Rx */
+	struct rtl8192_rx_ring rx_ring[RTL_PCI_MAX_RX_QUEUE];
+	int rxringcount;
+	u16 rxbuffersize;
+	u32 receive_config;
+
+	/*irq */
+	u8 irq_alloc;
+	u32 irq_mask[2];
+
+	/*Bcn control register setting */
+	u32 reg_bcn_ctrl_val;
+
+	 /*ASPM*/ u8 const_pci_aspm;
+	u8 const_amdpci_aspm;
+	u8 const_hwsw_rfoff_d3;
+	u8 const_support_pciaspm;
+	/*pci-e bridge */
+	u8 const_hostpci_aspm_setting;
+	/*pci-e device */
+	u8 const_devicepci_aspm_setting;
+	/*If it supports ASPM, Offset[560h] = 0x40,
+	   otherwise Offset[560h] = 0x00. */
+	bool b_support_aspm;
+	bool b_support_backdoor;
+
+	/*QOS & EDCA */
+	enum acm_method acm_method;
+};
+
+struct mp_adapter {
+	u8 linkctrl_reg;
+
+	u8 busnumber;
+	u8 devnumber;
+	u8 funcnumber;
+
+	u8 pcibridge_busnum;
+	u8 pcibridge_devnum;
+	u8 pcibridge_funcnum;
+
+	u8 pcibridge_vendor;
+	u16 pcibridge_vendorid;
+	u16 pcibridge_deviceid;
+
+	u32 pcicfg_addrport;
+	u8 num4bytes;
+
+	u8 pcibridge_pciehdr_offset;
+	u8 pcibridge_linkctrlreg;
+
+	bool amd_l1_patch;
+};
+
+struct rtl_pci_priv {
+	struct rtl_pci dev;
+	struct mp_adapter ndis_adapter;
+	struct rtl_led_ctl ledctl;
+};
+
+#define rtl_pcipriv(hw)		(((struct rtl_pci_priv *)(rtl_priv(hw))->priv))
+#define rtl_pcidev(pcipriv)	(&((pcipriv)->dev))
+
+int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw);
+
+extern struct rtl_intf_ops rtl_pci_ops;
+
+int __devinit rtl_pci_probe(struct pci_dev *pdev,
+			    const struct pci_device_id *id);
+void rtl_pci_disconnect(struct pci_dev *pdev);
+int rtl_pci_suspend(struct pci_dev *pdev, pm_message_t state);
+int rtl_pci_resume(struct pci_dev *pdev);
+
+static inline u8 pci_read8_sync(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return 0xff & readb((u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline u16 pci_read16_sync(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return readw((u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline u32 pci_read32_sync(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return readl((u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void pci_write8_async(struct rtl_priv *rtlpriv, u32 addr, u8 val)
+{
+	writeb(val, (u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void pci_write16_async(struct rtl_priv *rtlpriv,
+				     u32 addr, u16 val)
+{
+	writew(val, (u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void pci_write32_async(struct rtl_priv *rtlpriv,
+				     u32 addr, u32 val)
+{
+	writel(val, (u8 *) rtlpriv->io.pci_mem_start + addr);
+}
+
+static inline void rtl_pci_raw_write_port_ulong(u32 port, u32 val)
+{
+	outl(val, port);
+}
+
+static inline void rtl_pci_raw_write_port_uchar(u32 port, u8 val)
+{
+	outb(val, port);
+}
+
+static inline void rtl_pci_raw_read_port_uchar(u32 port, u8 *pval)
+{
+	*pval = inb(port);
+}
+
+static inline void rtl_pci_raw_read_port_ushort(u32 port, u16 *pval)
+{
+	*pval = inw(port);
+}
+
+static inline void rtl_pci_raw_read_port_ulong(u32 port, u32 *pval)
+{
+	*pval = inl(port);
+}
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c
new file mode 100644
index 00000000000..d2326c13449
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -0,0 +1,493 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "base.h"
+#include "ps.h"
+
+bool rtl_ps_enable_nic(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	bool init_status = true;
+
+	/*<1> reset trx ring */
+	if (rtlhal->interface == INTF_PCI)
+		rtlpriv->intf_ops->reset_trx_ring(hw);
+
+	if (is_hal_stop(rtlhal))
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("Driver is already down!\n"));
+
+	/*<2> Enable Adapter */
+	rtlpriv->cfg->ops->hw_init(hw);
+	RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+	/*init_status = false; */
+
+	/*<3> Enable Interrupt */
+	rtlpriv->cfg->ops->enable_interrupt(hw);
+
+	/*<enable timer> */
+	rtl_watch_dog_timer_callback((unsigned long)hw);
+
+	return init_status;
+}
+EXPORT_SYMBOL(rtl_ps_enable_nic);
+
+bool rtl_ps_disable_nic(struct ieee80211_hw *hw)
+{
+	bool status = true;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	/*<1> Stop all timer */
+	rtl_deinit_deferred_work(hw);
+
+	/*<2> Disable Interrupt */
+	rtlpriv->cfg->ops->disable_interrupt(hw);
+
+	/*<3> Disable Adapter */
+	rtlpriv->cfg->ops->hw_disable(hw);
+
+	return status;
+}
+EXPORT_SYMBOL(rtl_ps_disable_nic);
+
+bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
+			 enum rf_pwrstate state_toset,
+			 u32 changesource, bool protect_or_not)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum rf_pwrstate rtstate;
+	bool b_actionallowed = false;
+	u16 rfwait_cnt = 0;
+	unsigned long flag;
+
+	/*protect_or_not = true; */
+
+	if (protect_or_not)
+		goto no_protect;
+
+	/*
+	 *Only one thread can change
+	 *the RF state at one time, and others
+	 *should wait to be executed.
+	 */
+	while (true) {
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		if (ppsc->rfchange_inprogress) {
+			spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock,
+					       flag);
+
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+				 ("RF Change in progress!"
+				  "Wait to set..state_toset(%d).\n",
+				  state_toset));
+
+			/* Set RF after the previous action is done.  */
+			while (ppsc->rfchange_inprogress) {
+				rfwait_cnt++;
+				mdelay(1);
+
+				/*
+				 *Wait too long, return false to avoid
+				 *to be stuck here.
+				 */
+				if (rfwait_cnt > 100)
+					return false;
+			}
+		} else {
+			ppsc->rfchange_inprogress = true;
+			spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock,
+					       flag);
+			break;
+		}
+	}
+
+no_protect:
+	rtstate = ppsc->rfpwr_state;
+
+	switch (state_toset) {
+	case ERFON:
+		ppsc->rfoff_reason &= (~changesource);
+
+		if ((changesource == RF_CHANGE_BY_HW) &&
+		    (ppsc->b_hwradiooff == true)) {
+			ppsc->b_hwradiooff = false;
+		}
+
+		if (!ppsc->rfoff_reason) {
+			ppsc->rfoff_reason = 0;
+			b_actionallowed = true;
+		}
+
+		break;
+
+	case ERFOFF:
+
+		if ((changesource == RF_CHANGE_BY_HW)
+		    && (ppsc->b_hwradiooff == false)) {
+			ppsc->b_hwradiooff = true;
+		}
+
+		ppsc->rfoff_reason |= changesource;
+		b_actionallowed = true;
+		break;
+
+	case ERFSLEEP:
+		ppsc->rfoff_reason |= changesource;
+		b_actionallowed = true;
+		break;
+
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+
+	if (b_actionallowed)
+		rtlpriv->cfg->ops->set_rf_power_state(hw, state_toset);
+
+	if (!protect_or_not) {
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+	}
+
+	return b_actionallowed;
+}
+EXPORT_SYMBOL(rtl_ps_set_rf_state);
+
+static void _rtl_ps_inactive_ps(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	ppsc->b_swrf_processing = true;
+
+	if (ppsc->inactive_pwrstate == ERFON && rtlhal->interface == INTF_PCI) {
+		if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
+		    RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM) &&
+		    rtlhal->interface == INTF_PCI) {
+			rtlpriv->intf_ops->disable_aspm(hw);
+			RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+		}
+	}
+
+	rtl_ps_set_rf_state(hw, ppsc->inactive_pwrstate,
+			    RF_CHANGE_BY_IPS, false);
+
+	if (ppsc->inactive_pwrstate == ERFOFF &&
+	    rtlhal->interface == INTF_PCI) {
+		if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) {
+			rtlpriv->intf_ops->enable_aspm(hw);
+			RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+		}
+	}
+
+	ppsc->b_swrf_processing = false;
+}
+
+void rtl_ips_nic_off_wq_callback(void *data)
+{
+	struct rtl_works *rtlworks =
+	    container_of_dwork_rtl(data, struct rtl_works, ips_nic_off_wq);
+	struct ieee80211_hw *hw = rtlworks->hw;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum rf_pwrstate rtstate;
+
+	if (mac->opmode != NL80211_IFTYPE_STATION) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("not station return\n"));
+		return;
+	}
+
+	if (is_hal_stop(rtlhal))
+		return;
+
+	if (rtlpriv->sec.being_setkey)
+		return;
+
+	if (ppsc->b_inactiveps) {
+		rtstate = ppsc->rfpwr_state;
+
+		/*
+		 *Do not enter IPS in the following conditions:
+		 *(1) RF is already OFF or Sleep
+		 *(2) b_swrf_processing (indicates the IPS is still under going)
+		 *(3) Connectted (only disconnected can trigger IPS)
+		 *(4) IBSS (send Beacon)
+		 *(5) AP mode (send Beacon)
+		 *(6) monitor mode (rcv packet)
+		 */
+
+		if (rtstate == ERFON &&
+		    !ppsc->b_swrf_processing &&
+		    (mac->link_state == MAC80211_NOLINK) &&
+		    !mac->act_scanning) {
+			RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+				 ("IPSEnter(): Turn off RF.\n"));
+
+			ppsc->inactive_pwrstate = ERFOFF;
+			ppsc->b_in_powersavemode = true;
+
+			/*rtl_pci_reset_trx_ring(hw); */
+			_rtl_ps_inactive_ps(hw);
+		}
+	}
+}
+
+void rtl_ips_nic_off(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	/*
+	 *because when link with ap, mac80211 will ask us
+	 *to disable nic quickly after scan before linking,
+	 *this will cause link failed, so we delay 100ms here
+	 */
+	queue_delayed_work(rtlpriv->works.rtl_wq,
+			   &rtlpriv->works.ips_nic_off_wq, MSECS(100));
+}
+
+void rtl_ips_nic_on(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum rf_pwrstate rtstate;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtlpriv->locks.ips_lock, flags);
+
+	if (ppsc->b_inactiveps) {
+		rtstate = ppsc->rfpwr_state;
+
+		if (rtstate != ERFON &&
+		    !ppsc->b_swrf_processing &&
+		    ppsc->rfoff_reason <= RF_CHANGE_BY_IPS) {
+
+			ppsc->inactive_pwrstate = ERFON;
+			ppsc->b_in_powersavemode = false;
+
+			_rtl_ps_inactive_ps(hw);
+		}
+	}
+
+	spin_unlock_irqrestore(&rtlpriv->locks.ips_lock, flags);
+}
+
+/*for FW LPS*/
+
+/*
+ *Determine if we can set Fw into PS mode
+ *in current condition.Return TRUE if it
+ *can enter PS mode.
+ */
+static bool rtl_get_fwlps_doze(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u32 ps_timediff;
+
+	ps_timediff = jiffies_to_msecs(jiffies -
+				       ppsc->last_delaylps_stamp_jiffies);
+
+	if (ps_timediff < 2000) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("Delay enter Fw LPS for DHCP, ARP,"
+			  " or EAPOL exchanging state.\n"));
+		return false;
+	}
+
+	if (mac->link_state != MAC80211_LINKED)
+		return false;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		return false;
+
+	return true;
+}
+
+/* Change current and default preamble mode.*/
+static void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u8 rpwm_val, fw_pwrmode;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		return;
+
+	if (mac->link_state != MAC80211_LINKED)
+		return;
+
+	if (ppsc->dot11_psmode == rt_psmode)
+		return;
+
+	/* Update power save mode configured. */
+	ppsc->dot11_psmode = rt_psmode;
+
+	/*
+	 *<FW control LPS>
+	 *1. Enter PS mode
+	 *   Set RPWM to Fw to turn RF off and send H2C fw_pwrmode
+	 *   cmd to set Fw into PS mode.
+	 *2. Leave PS mode
+	 *   Send H2C fw_pwrmode cmd to Fw to set Fw into Active
+	 *   mode and set RPWM to turn RF on.
+	 */
+
+	if ((ppsc->b_fwctrl_lps) && (ppsc->b_leisure_ps) &&
+	     ppsc->report_linked) {
+		bool b_fw_current_inps;
+		if (ppsc->dot11_psmode == EACTIVE) {
+			RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+				 ("FW LPS leave ps_mode:%x\n",
+				  FW_PS_ACTIVE_MODE));
+
+			rpwm_val = 0x0C;	/* RF on */
+			fw_pwrmode = FW_PS_ACTIVE_MODE;
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+					(u8 *) (&rpwm_val));
+			rtlpriv->cfg->ops->set_hw_reg(hw,
+					HW_VAR_H2C_FW_PWRMODE,
+					(u8 *) (&fw_pwrmode));
+			b_fw_current_inps = false;
+
+			rtlpriv->cfg->ops->set_hw_reg(hw,
+					HW_VAR_FW_PSMODE_STATUS,
+					(u8 *) (&b_fw_current_inps));
+
+		} else {
+			if (rtl_get_fwlps_doze(hw)) {
+				RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+						("FW LPS enter ps_mode:%x\n",
+						 ppsc->fwctrl_psmode));
+
+				rpwm_val = 0x02;	/* RF off */
+				b_fw_current_inps = true;
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						HW_VAR_FW_PSMODE_STATUS,
+						(u8 *) (&b_fw_current_inps));
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						HW_VAR_H2C_FW_PWRMODE,
+						(u8 *) (&ppsc->fwctrl_psmode));
+
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+						HW_VAR_SET_RPWM,
+						(u8 *) (&rpwm_val));
+			} else {
+				/* Reset the power save related parameters. */
+				ppsc->dot11_psmode = EACTIVE;
+			}
+		}
+	}
+}
+
+/*Enter the leisure power save mode.*/
+void rtl_lps_enter(struct ieee80211_hw *hw)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	unsigned long flag;
+
+	if (!(ppsc->b_fwctrl_lps && ppsc->b_leisure_ps))
+		return;
+
+	if (rtlpriv->sec.being_setkey)
+		return;
+
+	if (rtlpriv->link_info.b_busytraffic)
+		return;
+
+	/*sleep after linked 10s, to let DHCP and 4-way handshake ok enough!! */
+	if (mac->cnt_after_linked < 5)
+		return;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		return;
+
+	if (mac->link_state != MAC80211_LINKED)
+		return;
+
+	spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);
+
+	if (ppsc->b_leisure_ps) {
+		/* Idle for a while if we connect to AP a while ago. */
+		if (mac->cnt_after_linked >= 2) {
+			if (ppsc->dot11_psmode == EACTIVE) {
+				RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+					("Enter 802.11 power save mode...\n"));
+
+				rtl_lps_set_psmode(hw, EAUTOPS);
+			}
+		}
+	}
+	spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
+}
+
+/*Leave the leisure power save mode.*/
+void rtl_lps_leave(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	unsigned long flag;
+
+	spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);
+
+	if (ppsc->b_fwctrl_lps && ppsc->b_leisure_ps) {
+		if (ppsc->dot11_psmode != EACTIVE) {
+
+			/*FIX ME */
+			rtlpriv->cfg->ops->enable_interrupt(hw);
+
+			if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM &&
+			    RT_IN_PS_LEVEL(ppsc, RT_RF_LPS_LEVEL_ASPM) &&
+			    rtlhal->interface == INTF_PCI) {
+				rtlpriv->intf_ops->disable_aspm(hw);
+				RT_CLEAR_PS_LEVEL(ppsc, RT_RF_LPS_LEVEL_ASPM);
+			}
+
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				 ("Busy Traffic,Leave 802.11 power save..\n"));
+
+			rtl_lps_set_psmode(hw, EACTIVE);
+		}
+	}
+	spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
+}
diff --git a/drivers/net/wireless/rtlwifi/ps.h b/drivers/net/wireless/rtlwifi/ps.h
new file mode 100644
index 00000000000..ae56da801a2
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/ps.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __REALTEK_RTL_PCI_PS_H__
+#define __REALTEK_RTL_PCI_PS_H__
+
+bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
+			 enum rf_pwrstate state_toset, u32 changesource,
+			 bool protect_or_not);
+bool rtl_ps_enable_nic(struct ieee80211_hw *hw);
+bool rtl_ps_disable_nic(struct ieee80211_hw *hw);
+void rtl_ips_nic_off(struct ieee80211_hw *hw);
+void rtl_ips_nic_on(struct ieee80211_hw *hw);
+void rtl_ips_nic_off_wq_callback(void *data);
+void rtl_lps_enter(struct ieee80211_hw *hw);
+void rtl_lps_leave(struct ieee80211_hw *hw);
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c
new file mode 100644
index 00000000000..91634107434
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rc.c
@@ -0,0 +1,329 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "base.h"
+#include "rc.h"
+
+/*
+ *Finds the highest rate index we can use
+ *if skb is special data like DHCP/EAPOL, we set should
+ *it to lowest rate CCK_1M, otherwise we set rate to
+ *CCK11M or OFDM_54M based on wireless mode.
+ */
+static u8 _rtl_rc_get_highest_rix(struct rtl_priv *rtlpriv,
+				  struct sk_buff *skb, bool not_data)
+{
+	struct rtl_mac *rtlmac = rtl_mac(rtlpriv);
+
+	/*
+	 *mgt use 1M, although we have check it
+	 *before this function use rate_control_send_low,
+	 *we still check it here
+	 */
+	if (not_data)
+		return rtlpriv->cfg->maps[RTL_RC_CCK_RATE1M];
+
+	/*
+	 *this rate is no use for true rate, firmware
+	 *will control rate at all it just used for
+	 *1.show in iwconfig in B/G mode
+	 *2.in rtl_get_tcb_desc when we check rate is
+	 *      1M we will not use FW rate but user rate.
+	 */
+	if (rtl_is_special_data(rtlpriv->mac80211.hw, skb, true)) {
+		return rtlpriv->cfg->maps[RTL_RC_CCK_RATE1M];
+	} else {
+		if (rtlmac->mode == WIRELESS_MODE_B)
+			return rtlpriv->cfg->maps[RTL_RC_CCK_RATE11M];
+		else
+			return rtlpriv->cfg->maps[RTL_RC_OFDM_RATE54M];
+	}
+}
+
+static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv,
+				    struct ieee80211_tx_rate *rate,
+				    struct ieee80211_tx_rate_control *txrc,
+				    u8 tries, u8 rix, int rtsctsenable,
+				    bool not_data)
+{
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+
+	rate->count = tries;
+	rate->idx = (rix > 0x2) ? rix : 0x2;
+
+	if (!not_data) {
+		if (txrc->short_preamble)
+			rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE;
+		if (mac->bw_40)
+			rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
+		if (mac->sgi_20 || mac->sgi_40)
+			rate->flags |= IEEE80211_TX_RC_SHORT_GI;
+		if (mac->ht_enable)
+			rate->flags |= IEEE80211_TX_RC_MCS;
+	}
+}
+
+static void rtl_get_rate(void *ppriv, struct ieee80211_sta *sta,
+			 void *priv_sta, struct ieee80211_tx_rate_control *txrc)
+{
+	struct rtl_priv *rtlpriv = ppriv;
+	struct sk_buff *skb = txrc->skb;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_tx_rate *rates = tx_info->control.rates;
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+	__le16 fc = hdr->frame_control;
+	u8 try_per_rate, i, rix;
+	bool not_data = !ieee80211_is_data(fc);
+
+	if (rate_control_send_low(sta, priv_sta, txrc))
+		return;
+
+	rix = _rtl_rc_get_highest_rix(rtlpriv, skb, not_data);
+
+	try_per_rate = 1;
+	_rtl_rc_rate_set_series(rtlpriv, &rates[0], txrc,
+				try_per_rate, rix, 1, not_data);
+
+	if (!not_data) {
+		for (i = 1; i < 4; i++)
+			_rtl_rc_rate_set_series(rtlpriv, &rates[i],
+						txrc, i, (rix - i), 1,
+						not_data);
+	}
+}
+
+static bool _rtl_tx_aggr_check(struct rtl_priv *rtlpriv, u16 tid)
+{
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+
+	if (mac->act_scanning)
+		return false;
+
+	if (mac->cnt_after_linked < 3)
+		return false;
+
+	if (mac->tids[tid].agg.agg_state == RTL_AGG_OFF)
+		return true;
+
+	return false;
+}
+
+/*mac80211 Rate Control callbacks*/
+static void rtl_tx_status(void *ppriv,
+			  struct ieee80211_supported_band *sband,
+			  struct ieee80211_sta *sta, void *priv_sta,
+			  struct sk_buff *skb)
+{
+	struct rtl_priv *rtlpriv = ppriv;
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+	struct ieee80211_hdr *hdr;
+	__le16 fc;
+
+	hdr = (struct ieee80211_hdr *)skb->data;
+	fc = hdr->frame_control;
+
+	if (!priv_sta || !ieee80211_is_data(fc))
+		return;
+
+	if (rtl_is_special_data(mac->hw, skb, true))
+		return;
+
+	if (is_multicast_ether_addr(ieee80211_get_DA(hdr))
+	    || is_broadcast_ether_addr(ieee80211_get_DA(hdr)))
+		return;
+
+	/* Check if aggregation has to be enabled for this tid */
+	if (conf_is_ht(&mac->hw->conf) &&
+	    !(skb->protocol == cpu_to_be16(ETH_P_PAE))) {
+		if (ieee80211_is_data_qos(fc)) {
+			u8 *qc, tid;
+
+			qc = ieee80211_get_qos_ctl(hdr);
+			tid = qc[0] & 0xf;
+
+			if (_rtl_tx_aggr_check(rtlpriv, tid))
+				ieee80211_start_tx_ba_session(sta, tid, 5000);
+		}
+	}
+}
+
+static void rtl_rate_init(void *ppriv,
+			  struct ieee80211_supported_band *sband,
+			  struct ieee80211_sta *sta, void *priv_sta)
+{
+	struct rtl_priv *rtlpriv = ppriv;
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+	u8 is_ht = conf_is_ht(&mac->hw->conf);
+
+	if ((mac->opmode == NL80211_IFTYPE_STATION) ||
+	    (mac->opmode == NL80211_IFTYPE_MESH_POINT) ||
+	    (mac->opmode == NL80211_IFTYPE_ADHOC)) {
+
+		switch (sband->band) {
+		case IEEE80211_BAND_2GHZ:
+			rtlpriv->rate_priv->cur_ratetab_idx =
+			    RATR_INX_WIRELESS_G;
+			if (is_ht)
+				rtlpriv->rate_priv->cur_ratetab_idx =
+				    RATR_INX_WIRELESS_NGB;
+			break;
+		case IEEE80211_BAND_5GHZ:
+			rtlpriv->rate_priv->cur_ratetab_idx =
+			    RATR_INX_WIRELESS_A;
+			if (is_ht)
+				rtlpriv->rate_priv->cur_ratetab_idx =
+				    RATR_INX_WIRELESS_NGB;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+				 ("Invalid band\n"));
+			rtlpriv->rate_priv->cur_ratetab_idx =
+			    RATR_INX_WIRELESS_NGB;
+			break;
+		}
+
+		RT_TRACE(rtlpriv, COMP_RATE, DBG_DMESG,
+			 ("Choosing rate table index: %d\n",
+			  rtlpriv->rate_priv->cur_ratetab_idx));
+
+	}
+
+}
+
+static void rtl_rate_update(void *ppriv,
+			    struct ieee80211_supported_band *sband,
+			    struct ieee80211_sta *sta, void *priv_sta,
+			    u32 changed,
+			    enum nl80211_channel_type oper_chan_type)
+{
+	struct rtl_priv *rtlpriv = ppriv;
+	struct rtl_mac *mac = rtl_mac(rtlpriv);
+	struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
+	bool oper_cw40 = false, oper_sgi40;
+	bool local_cw40 = mac->bw_40;
+	bool local_sgi40 = mac->sgi_40;
+	u8 is_ht = conf_is_ht(&mac->hw->conf);
+
+	if (changed & IEEE80211_RC_HT_CHANGED) {
+		if (mac->opmode != NL80211_IFTYPE_STATION)
+			return;
+
+		if (rtlhal->hw->conf.channel_type == NL80211_CHAN_HT40MINUS ||
+		    rtlhal->hw->conf.channel_type == NL80211_CHAN_HT40PLUS)
+			oper_cw40 = true;
+
+		oper_sgi40 = mac->sgi_40;
+
+		if ((local_cw40 != oper_cw40) || (local_sgi40 != oper_sgi40)) {
+			switch (sband->band) {
+			case IEEE80211_BAND_2GHZ:
+				rtlpriv->rate_priv->cur_ratetab_idx =
+				    RATR_INX_WIRELESS_G;
+				if (is_ht)
+					rtlpriv->rate_priv->cur_ratetab_idx =
+					    RATR_INX_WIRELESS_NGB;
+				break;
+			case IEEE80211_BAND_5GHZ:
+				rtlpriv->rate_priv->cur_ratetab_idx =
+				    RATR_INX_WIRELESS_A;
+				if (is_ht)
+					rtlpriv->rate_priv->cur_ratetab_idx =
+					    RATR_INX_WIRELESS_NGB;
+				break;
+			default:
+				RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+					 ("Invalid band\n"));
+				rtlpriv->rate_priv->cur_ratetab_idx =
+				    RATR_INX_WIRELESS_NGB;
+				break;
+			}
+		}
+	}
+}
+
+static void *rtl_rate_alloc(struct ieee80211_hw *hw,
+		struct dentry *debugfsdir)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	return rtlpriv;
+}
+
+static void rtl_rate_free(void *rtlpriv)
+{
+	return;
+}
+
+static void *rtl_rate_alloc_sta(void *ppriv,
+				struct ieee80211_sta *sta, gfp_t gfp)
+{
+	struct rtl_priv *rtlpriv = ppriv;
+	struct rtl_rate_priv *rate_priv;
+
+	rate_priv = kzalloc(sizeof(struct rtl_rate_priv), gfp);
+	if (!rate_priv) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Unable to allocate private rc structure\n"));
+		return NULL;
+	}
+
+	rtlpriv->rate_priv = rate_priv;
+
+	return rate_priv;
+}
+
+static void rtl_rate_free_sta(void *rtlpriv,
+			      struct ieee80211_sta *sta, void *priv_sta)
+{
+	struct rtl_rate_priv *rate_priv = priv_sta;
+	kfree(rate_priv);
+}
+
+static struct rate_control_ops rtl_rate_ops = {
+	.module = NULL,
+	.name = "rtl_rc",
+	.alloc = rtl_rate_alloc,
+	.free = rtl_rate_free,
+	.alloc_sta = rtl_rate_alloc_sta,
+	.free_sta = rtl_rate_free_sta,
+	.rate_init = rtl_rate_init,
+	.rate_update = rtl_rate_update,
+	.tx_status = rtl_tx_status,
+	.get_rate = rtl_get_rate,
+};
+
+int rtl_rate_control_register(void)
+{
+	return ieee80211_rate_control_register(&rtl_rate_ops);
+}
+
+void rtl_rate_control_unregister(void)
+{
+	ieee80211_rate_control_unregister(&rtl_rate_ops);
+}
diff --git a/drivers/net/wireless/rtlwifi/rc.h b/drivers/net/wireless/rtlwifi/rc.h
new file mode 100644
index 00000000000..b4667c035f0
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rc.h
@@ -0,0 +1,40 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_RC_H__
+#define __RTL_RC_H__
+
+struct rtl_rate_priv {
+	u8 cur_ratetab_idx;
+	u8 ht_cap;
+};
+
+int rtl_rate_control_register(void);
+void rtl_rate_control_unregister(void);
+#endif
diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c
new file mode 100644
index 00000000000..3336ca999df
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/regd.c
@@ -0,0 +1,400 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "regd.h"
+
+static struct country_code_to_enum_rd allCountries[] = {
+	{COUNTRY_CODE_FCC, "US"},
+	{COUNTRY_CODE_IC, "US"},
+	{COUNTRY_CODE_ETSI, "EC"},
+	{COUNTRY_CODE_SPAIN, "EC"},
+	{COUNTRY_CODE_FRANCE, "EC"},
+	{COUNTRY_CODE_MKK, "JP"},
+	{COUNTRY_CODE_MKK1, "JP"},
+	{COUNTRY_CODE_ISRAEL, "EC"},
+	{COUNTRY_CODE_TELEC, "JP"},
+	{COUNTRY_CODE_MIC, "JP"},
+	{COUNTRY_CODE_GLOBAL_DOMAIN, "JP"},
+	{COUNTRY_CODE_WORLD_WIDE_13, "EC"},
+	{COUNTRY_CODE_TELEC_NETGEAR, "EC"},
+};
+
+/*
+ *Only these channels all allow active
+ *scan on all world regulatory domains
+ */
+#define RTL819x_2GHZ_CH01_11	\
+	REG_RULE(2412-10, 2462+10, 40, 0, 20, 0)
+
+/*
+ *We enable active scan on these a case
+ *by case basis by regulatory domain
+ */
+#define RTL819x_2GHZ_CH12_13	\
+	REG_RULE(2467-10, 2472+10, 40, 0, 20,\
+	NL80211_RRF_PASSIVE_SCAN)
+
+#define RTL819x_2GHZ_CH14	\
+	REG_RULE(2484-10, 2484+10, 40, 0, 20, \
+	NL80211_RRF_PASSIVE_SCAN | \
+	NL80211_RRF_NO_OFDM)
+
+static const struct ieee80211_regdomain rtl_regdom_11 = {
+	.n_reg_rules = 1,
+	.alpha2 = "99",
+	.reg_rules = {
+		      RTL819x_2GHZ_CH01_11,
+	}
+};
+
+static const struct ieee80211_regdomain rtl_regdom_global = {
+	.n_reg_rules = 3,
+	.alpha2 = "99",
+	.reg_rules = {
+		      RTL819x_2GHZ_CH01_11,
+		      RTL819x_2GHZ_CH12_13,
+		      RTL819x_2GHZ_CH14,
+	}
+};
+
+static const struct ieee80211_regdomain rtl_regdom_world = {
+	.n_reg_rules = 2,
+	.alpha2 = "99",
+	.reg_rules = {
+		      RTL819x_2GHZ_CH01_11,
+		      RTL819x_2GHZ_CH12_13,
+	}
+};
+
+static bool _rtl_is_radar_freq(u16 center_freq)
+{
+	return (center_freq >= 5260 && center_freq <= 5700);
+}
+
+static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy,
+					   enum nl80211_reg_initiator initiator)
+{
+	enum ieee80211_band band;
+	struct ieee80211_supported_band *sband;
+	const struct ieee80211_reg_rule *reg_rule;
+	struct ieee80211_channel *ch;
+	unsigned int i;
+	u32 bandwidth = 0;
+	int r;
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+
+		if (!wiphy->bands[band])
+			continue;
+
+		sband = wiphy->bands[band];
+
+		for (i = 0; i < sband->n_channels; i++) {
+			ch = &sband->channels[i];
+			if (_rtl_is_radar_freq(ch->center_freq) ||
+			    (ch->flags & IEEE80211_CHAN_RADAR))
+				continue;
+			if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
+				r = freq_reg_info(wiphy, ch->center_freq,
+						  bandwidth, &reg_rule);
+				if (r)
+					continue;
+
+				/*
+				 *If 11d had a rule for this channel ensure
+				 *we enable adhoc/beaconing if it allows us to
+				 *use it. Note that we would have disabled it
+				 *by applying our static world regdomain by
+				 *default during init, prior to calling our
+				 *regulatory_hint().
+				 */
+
+				if (!(reg_rule->flags & NL80211_RRF_NO_IBSS))
+					ch->flags &= ~IEEE80211_CHAN_NO_IBSS;
+				if (!(reg_rule->
+				     flags & NL80211_RRF_PASSIVE_SCAN))
+					ch->flags &=
+					    ~IEEE80211_CHAN_PASSIVE_SCAN;
+			} else {
+				if (ch->beacon_found)
+					ch->flags &= ~(IEEE80211_CHAN_NO_IBSS |
+						  IEEE80211_CHAN_PASSIVE_SCAN);
+			}
+		}
+	}
+}
+
+/* Allows active scan scan on Ch 12 and 13 */
+static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
+					     enum nl80211_reg_initiator
+					     initiator)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *ch;
+	const struct ieee80211_reg_rule *reg_rule;
+	u32 bandwidth = 0;
+	int r;
+
+	sband = wiphy->bands[IEEE80211_BAND_2GHZ];
+
+	/*
+	 *If no country IE has been received always enable active scan
+	 *on these channels. This is only done for specific regulatory SKUs
+	 */
+	if (initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) {
+		ch = &sband->channels[11];	/* CH 12 */
+		if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+			ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+		ch = &sband->channels[12];	/* CH 13 */
+		if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+			ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+		return;
+	}
+
+	/*
+	 *If a country IE has been recieved check its rule for this
+	 *channel first before enabling active scan. The passive scan
+	 *would have been enforced by the initial processing of our
+	 *custom regulatory domain.
+	 */
+
+	ch = &sband->channels[11];	/* CH 12 */
+	r = freq_reg_info(wiphy, ch->center_freq, bandwidth, &reg_rule);
+	if (!r) {
+		if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
+			if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+				ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+	}
+
+	ch = &sband->channels[12];	/* CH 13 */
+	r = freq_reg_info(wiphy, ch->center_freq, bandwidth, &reg_rule);
+	if (!r) {
+		if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
+			if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
+				ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
+	}
+}
+
+/*
+ *Always apply Radar/DFS rules on
+ *freq range 5260 MHz - 5700 MHz
+ */
+static void _rtl_reg_apply_radar_flags(struct wiphy *wiphy)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *ch;
+	unsigned int i;
+
+	if (!wiphy->bands[IEEE80211_BAND_5GHZ])
+		return;
+
+	sband = wiphy->bands[IEEE80211_BAND_5GHZ];
+
+	for (i = 0; i < sband->n_channels; i++) {
+		ch = &sband->channels[i];
+		if (!_rtl_is_radar_freq(ch->center_freq))
+			continue;
+
+		/*
+		 *We always enable radar detection/DFS on this
+		 *frequency range. Additionally we also apply on
+		 *this frequency range:
+		 *- If STA mode does not yet have DFS supports disable
+		 * active scanning
+		 *- If adhoc mode does not support DFS yet then disable
+		 * adhoc in the frequency.
+		 *- If AP mode does not yet support radar detection/DFS
+		 *do not allow AP mode
+		 */
+		if (!(ch->flags & IEEE80211_CHAN_DISABLED))
+			ch->flags |= IEEE80211_CHAN_RADAR |
+			    IEEE80211_CHAN_NO_IBSS |
+			    IEEE80211_CHAN_PASSIVE_SCAN;
+	}
+}
+
+static void _rtl_reg_apply_world_flags(struct wiphy *wiphy,
+				       enum nl80211_reg_initiator initiator,
+				       struct rtl_regulatory *reg)
+{
+	_rtl_reg_apply_beaconing_flags(wiphy, initiator);
+	_rtl_reg_apply_active_scan_flags(wiphy, initiator);
+	return;
+}
+
+static void _rtl_dump_channel_map(struct wiphy *wiphy)
+{
+	enum ieee80211_band band;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_channel *ch;
+	unsigned int i;
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		if (!wiphy->bands[band])
+			continue;
+		sband = wiphy->bands[band];
+		for (i = 0; i < sband->n_channels; i++)
+			ch = &sband->channels[i];
+	}
+}
+
+static int _rtl_reg_notifier_apply(struct wiphy *wiphy,
+				   struct regulatory_request *request,
+				   struct rtl_regulatory *reg)
+{
+	/* We always apply this */
+	_rtl_reg_apply_radar_flags(wiphy);
+
+	switch (request->initiator) {
+	case NL80211_REGDOM_SET_BY_DRIVER:
+	case NL80211_REGDOM_SET_BY_CORE:
+	case NL80211_REGDOM_SET_BY_USER:
+		break;
+	case NL80211_REGDOM_SET_BY_COUNTRY_IE:
+		_rtl_reg_apply_world_flags(wiphy, request->initiator, reg);
+		break;
+	}
+
+	_rtl_dump_channel_map(wiphy);
+
+	return 0;
+}
+
+static const struct ieee80211_regdomain *_rtl_regdomain_select(
+					       struct rtl_regulatory *reg)
+{
+	switch (reg->country_code) {
+	case COUNTRY_CODE_FCC:
+	case COUNTRY_CODE_IC:
+		return &rtl_regdom_11;
+	case COUNTRY_CODE_ETSI:
+	case COUNTRY_CODE_SPAIN:
+	case COUNTRY_CODE_FRANCE:
+	case COUNTRY_CODE_ISRAEL:
+	case COUNTRY_CODE_TELEC_NETGEAR:
+		return &rtl_regdom_world;
+	case COUNTRY_CODE_MKK:
+	case COUNTRY_CODE_MKK1:
+	case COUNTRY_CODE_TELEC:
+	case COUNTRY_CODE_MIC:
+		return &rtl_regdom_global;
+	case COUNTRY_CODE_GLOBAL_DOMAIN:
+		return &rtl_regdom_global;
+	case COUNTRY_CODE_WORLD_WIDE_13:
+		return &rtl_regdom_world;
+	default:
+		return &rtl_regdom_world;
+	}
+}
+
+static int _rtl_regd_init_wiphy(struct rtl_regulatory *reg,
+				struct wiphy *wiphy,
+				int (*reg_notifier) (struct wiphy *wiphy,
+						     struct regulatory_request *
+						     request))
+{
+	const struct ieee80211_regdomain *regd;
+
+	wiphy->reg_notifier = reg_notifier;
+	wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
+	wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY;
+	wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS;
+	regd = _rtl_regdomain_select(reg);
+	wiphy_apply_custom_regulatory(wiphy, regd);
+	_rtl_reg_apply_radar_flags(wiphy);
+	_rtl_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg);
+	return 0;
+}
+
+static struct country_code_to_enum_rd *_rtl_regd_find_country(u16 countrycode)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(allCountries); i++) {
+		if (allCountries[i].countrycode == countrycode)
+			return &allCountries[i];
+	}
+	return NULL;
+}
+
+int rtl_regd_init(struct ieee80211_hw *hw,
+		  int (*reg_notifier) (struct wiphy *wiphy,
+				       struct regulatory_request *request))
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct wiphy *wiphy = hw->wiphy;
+	struct country_code_to_enum_rd *country = NULL;
+
+	if (wiphy == NULL || &rtlpriv->regd == NULL)
+		return -EINVAL;
+
+	/* force the channel plan to world wide 13 */
+	rtlpriv->regd.country_code = COUNTRY_CODE_WORLD_WIDE_13;
+
+	RT_TRACE(rtlpriv, COMP_REGD, DBG_TRACE,
+		 (KERN_DEBUG "rtl: EEPROM regdomain: 0x%0x\n",
+		  rtlpriv->regd.country_code));
+
+	if (rtlpriv->regd.country_code >= COUNTRY_CODE_MAX) {
+		RT_TRACE(rtlpriv, COMP_REGD, DBG_DMESG,
+			 (KERN_DEBUG "rtl: EEPROM indicates invalid contry code"
+			  "world wide 13 should be used\n"));
+
+		rtlpriv->regd.country_code = COUNTRY_CODE_WORLD_WIDE_13;
+	}
+
+	country = _rtl_regd_find_country(rtlpriv->regd.country_code);
+
+	if (country) {
+		rtlpriv->regd.alpha2[0] = country->isoName[0];
+		rtlpriv->regd.alpha2[1] = country->isoName[1];
+	} else {
+		rtlpriv->regd.alpha2[0] = '0';
+		rtlpriv->regd.alpha2[1] = '0';
+	}
+
+	RT_TRACE(rtlpriv, COMP_REGD, DBG_TRACE,
+		 (KERN_DEBUG "rtl: Country alpha2 being used: %c%c\n",
+		  rtlpriv->regd.alpha2[0], rtlpriv->regd.alpha2[1]));
+
+	_rtl_regd_init_wiphy(&rtlpriv->regd, wiphy, reg_notifier);
+
+	return 0;
+}
+
+int rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
+{
+	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_REGD, DBG_LOUD, ("\n"));
+
+	return _rtl_reg_notifier_apply(wiphy, request, &rtlpriv->regd);
+}
diff --git a/drivers/net/wireless/rtlwifi/regd.h b/drivers/net/wireless/rtlwifi/regd.h
new file mode 100644
index 00000000000..4cdbc4ae76d
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/regd.h
@@ -0,0 +1,61 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_REGD_H__
+#define __RTL_REGD_H__
+
+struct country_code_to_enum_rd {
+	u16 countrycode;
+	const char *isoName;
+};
+
+enum country_code_type_t {
+	COUNTRY_CODE_FCC = 0,
+	COUNTRY_CODE_IC = 1,
+	COUNTRY_CODE_ETSI = 2,
+	COUNTRY_CODE_SPAIN = 3,
+	COUNTRY_CODE_FRANCE = 4,
+	COUNTRY_CODE_MKK = 5,
+	COUNTRY_CODE_MKK1 = 6,
+	COUNTRY_CODE_ISRAEL = 7,
+	COUNTRY_CODE_TELEC = 8,
+	COUNTRY_CODE_MIC = 9,
+	COUNTRY_CODE_GLOBAL_DOMAIN = 10,
+	COUNTRY_CODE_WORLD_WIDE_13 = 11,
+	COUNTRY_CODE_TELEC_NETGEAR = 12,
+
+	/*add new channel plan above this line */
+	COUNTRY_CODE_MAX
+};
+
+int rtl_regd_init(struct ieee80211_hw *hw,
+		  int (*reg_notifier) (struct wiphy *wiphy,
+				       struct regulatory_request *request));
+int rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request);
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/Makefile b/drivers/net/wireless/rtlwifi/rtl8192ce/Makefile
new file mode 100644
index 00000000000..0f0be7c763b
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/Makefile
@@ -0,0 +1,12 @@
+rtl8192ce-objs :=		\
+		dm.o		\
+		fw.o		\
+		hw.o		\
+		led.o		\
+		phy.o		\
+		rf.o		\
+		sw.o		\
+		table.o		\
+		trx.o
+
+obj-$(CONFIG_RTL8192CE) += rtl8192ce.o
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h
new file mode 100644
index 00000000000..83cd6489529
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h
@@ -0,0 +1,257 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92C_DEF_H__
+#define __RTL92C_DEF_H__
+
+#define HAL_RETRY_LIMIT_INFRA				48
+#define HAL_RETRY_LIMIT_AP_ADHOC			7
+
+#define	PHY_RSSI_SLID_WIN_MAX				100
+#define	PHY_LINKQUALITY_SLID_WIN_MAX			20
+#define	PHY_BEACON_RSSI_SLID_WIN_MAX			10
+
+#define RESET_DELAY_8185				20
+
+#define RT_IBSS_INT_MASKS	(IMR_BCNINT | IMR_TBDOK | IMR_TBDER)
+#define RT_AC_INT_MASKS		(IMR_VIDOK | IMR_VODOK | IMR_BEDOK|IMR_BKDOK)
+
+#define NUM_OF_FIRMWARE_QUEUE				10
+#define NUM_OF_PAGES_IN_FW				0x100
+#define NUM_OF_PAGE_IN_FW_QUEUE_BK			0x07
+#define NUM_OF_PAGE_IN_FW_QUEUE_BE			0x07
+#define NUM_OF_PAGE_IN_FW_QUEUE_VI			0x07
+#define NUM_OF_PAGE_IN_FW_QUEUE_VO			0x07
+#define NUM_OF_PAGE_IN_FW_QUEUE_HCCA			0x0
+#define NUM_OF_PAGE_IN_FW_QUEUE_CMD			0x0
+#define NUM_OF_PAGE_IN_FW_QUEUE_MGNT			0x02
+#define NUM_OF_PAGE_IN_FW_QUEUE_HIGH			0x02
+#define NUM_OF_PAGE_IN_FW_QUEUE_BCN			0x2
+#define NUM_OF_PAGE_IN_FW_QUEUE_PUB			0xA1
+
+#define NUM_OF_PAGE_IN_FW_QUEUE_BK_DTM			0x026
+#define NUM_OF_PAGE_IN_FW_QUEUE_BE_DTM			0x048
+#define NUM_OF_PAGE_IN_FW_QUEUE_VI_DTM			0x048
+#define NUM_OF_PAGE_IN_FW_QUEUE_VO_DTM			0x026
+#define NUM_OF_PAGE_IN_FW_QUEUE_PUB_DTM			0x00
+
+#define MAX_LINES_HWCONFIG_TXT				1000
+#define MAX_BYTES_LINE_HWCONFIG_TXT			256
+
+#define SW_THREE_WIRE					0
+#define HW_THREE_WIRE					2
+
+#define BT_DEMO_BOARD					0
+#define BT_QA_BOARD					1
+#define BT_FPGA						2
+
+#define RX_SMOOTH_FACTOR				20
+
+#define HAL_PRIME_CHNL_OFFSET_DONT_CARE			0
+#define HAL_PRIME_CHNL_OFFSET_LOWER			1
+#define HAL_PRIME_CHNL_OFFSET_UPPER			2
+
+#define MAX_H2C_QUEUE_NUM				10
+
+#define RX_MPDU_QUEUE					0
+#define RX_CMD_QUEUE					1
+#define RX_MAX_QUEUE					2
+#define AC2QUEUEID(_AC)					(_AC)
+
+#define	C2H_RX_CMD_HDR_LEN				8
+#define	GET_C2H_CMD_CMD_LEN(__prxhdr)		\
+	LE_BITS_TO_4BYTE((__prxhdr), 0, 16)
+#define	GET_C2H_CMD_ELEMENT_ID(__prxhdr)	\
+	LE_BITS_TO_4BYTE((__prxhdr), 16, 8)
+#define	GET_C2H_CMD_CMD_SEQ(__prxhdr)		\
+	LE_BITS_TO_4BYTE((__prxhdr), 24, 7)
+#define	GET_C2H_CMD_CONTINUE(__prxhdr)		\
+	LE_BITS_TO_4BYTE((__prxhdr), 31, 1)
+#define	GET_C2H_CMD_CONTENT(__prxhdr)		\
+	((u8 *)(__prxhdr) + C2H_RX_CMD_HDR_LEN)
+
+#define	GET_C2H_CMD_FEEDBACK_ELEMENT_ID(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE((__pcmdfbhdr), 0, 8)
+#define	GET_C2H_CMD_FEEDBACK_CCX_LEN(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE((__pcmdfbhdr), 8, 8)
+#define	GET_C2H_CMD_FEEDBACK_CCX_CMD_CNT(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE((__pcmdfbhdr), 16, 16)
+#define	GET_C2H_CMD_FEEDBACK_CCX_MAC_ID(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 0, 5)
+#define	GET_C2H_CMD_FEEDBACK_CCX_VALID(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 7, 1)
+#define	GET_C2H_CMD_FEEDBACK_CCX_RETRY_CNT(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 8, 5)
+#define	GET_C2H_CMD_FEEDBACK_CCX_TOK(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 15, 1)
+#define	GET_C2H_CMD_FEEDBACK_CCX_QSEL(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 16, 4)
+#define	GET_C2H_CMD_FEEDBACK_CCX_SEQ(__pcmdfbhdr)	\
+	LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 20, 12)
+
+#define CHIP_VER_B			BIT(4)
+#define CHIP_92C_BITMASK		BIT(0)
+#define CHIP_92C_1T2R			0x03
+#define CHIP_92C			0x01
+#define CHIP_88C			0x00
+
+enum version_8192c {
+	VERSION_A_CHIP_92C = 0x01,
+	VERSION_A_CHIP_88C = 0x00,
+	VERSION_B_CHIP_92C = 0x11,
+	VERSION_B_CHIP_88C = 0x10,
+	VERSION_UNKNOWN = 0x88,
+};
+
+#define IS_CHIP_VER_B(version)  ((version & CHIP_VER_B) ? true : false)
+#define IS_92C_SERIAL(version)  ((version & CHIP_92C_BITMASK) ? true : false)
+
+enum rtl819x_loopback_e {
+	RTL819X_NO_LOOPBACK = 0,
+	RTL819X_MAC_LOOPBACK = 1,
+	RTL819X_DMA_LOOPBACK = 2,
+	RTL819X_CCK_LOOPBACK = 3,
+};
+
+enum rf_optype {
+	RF_OP_BY_SW_3WIRE = 0,
+	RF_OP_BY_FW,
+	RF_OP_MAX
+};
+
+enum rf_power_state {
+	RF_ON,
+	RF_OFF,
+	RF_SLEEP,
+	RF_SHUT_DOWN,
+};
+
+enum power_save_mode {
+	POWER_SAVE_MODE_ACTIVE,
+	POWER_SAVE_MODE_SAVE,
+};
+
+enum power_polocy_config {
+	POWERCFG_MAX_POWER_SAVINGS,
+	POWERCFG_GLOBAL_POWER_SAVINGS,
+	POWERCFG_LOCAL_POWER_SAVINGS,
+	POWERCFG_LENOVO,
+};
+
+enum interface_select_pci {
+	INTF_SEL1_MINICARD = 0,
+	INTF_SEL0_PCIE = 1,
+	INTF_SEL2_RSV = 2,
+	INTF_SEL3_RSV = 3,
+};
+
+enum hal_fw_c2h_cmd_id {
+	HAL_FW_C2H_CMD_Read_MACREG = 0,
+	HAL_FW_C2H_CMD_Read_BBREG = 1,
+	HAL_FW_C2H_CMD_Read_RFREG = 2,
+	HAL_FW_C2H_CMD_Read_EEPROM = 3,
+	HAL_FW_C2H_CMD_Read_EFUSE = 4,
+	HAL_FW_C2H_CMD_Read_CAM = 5,
+	HAL_FW_C2H_CMD_Get_BasicRate = 6,
+	HAL_FW_C2H_CMD_Get_DataRate = 7,
+	HAL_FW_C2H_CMD_Survey = 8,
+	HAL_FW_C2H_CMD_SurveyDone = 9,
+	HAL_FW_C2H_CMD_JoinBss = 10,
+	HAL_FW_C2H_CMD_AddSTA = 11,
+	HAL_FW_C2H_CMD_DelSTA = 12,
+	HAL_FW_C2H_CMD_AtimDone = 13,
+	HAL_FW_C2H_CMD_TX_Report = 14,
+	HAL_FW_C2H_CMD_CCX_Report = 15,
+	HAL_FW_C2H_CMD_DTM_Report = 16,
+	HAL_FW_C2H_CMD_TX_Rate_Statistics = 17,
+	HAL_FW_C2H_CMD_C2HLBK = 18,
+	HAL_FW_C2H_CMD_C2HDBG = 19,
+	HAL_FW_C2H_CMD_C2HFEEDBACK = 20,
+	HAL_FW_C2H_CMD_MAX
+};
+
+enum rtl_desc_qsel {
+	QSLT_BK = 0x2,
+	QSLT_BE = 0x0,
+	QSLT_VI = 0x5,
+	QSLT_VO = 0x7,
+	QSLT_BEACON = 0x10,
+	QSLT_HIGH = 0x11,
+	QSLT_MGNT = 0x12,
+	QSLT_CMD = 0x13,
+};
+
+enum rtl_desc92c_rate {
+	DESC92C_RATE1M = 0x00,
+	DESC92C_RATE2M = 0x01,
+	DESC92C_RATE5_5M = 0x02,
+	DESC92C_RATE11M = 0x03,
+
+	DESC92C_RATE6M = 0x04,
+	DESC92C_RATE9M = 0x05,
+	DESC92C_RATE12M = 0x06,
+	DESC92C_RATE18M = 0x07,
+	DESC92C_RATE24M = 0x08,
+	DESC92C_RATE36M = 0x09,
+	DESC92C_RATE48M = 0x0a,
+	DESC92C_RATE54M = 0x0b,
+
+	DESC92C_RATEMCS0 = 0x0c,
+	DESC92C_RATEMCS1 = 0x0d,
+	DESC92C_RATEMCS2 = 0x0e,
+	DESC92C_RATEMCS3 = 0x0f,
+	DESC92C_RATEMCS4 = 0x10,
+	DESC92C_RATEMCS5 = 0x11,
+	DESC92C_RATEMCS6 = 0x12,
+	DESC92C_RATEMCS7 = 0x13,
+	DESC92C_RATEMCS8 = 0x14,
+	DESC92C_RATEMCS9 = 0x15,
+	DESC92C_RATEMCS10 = 0x16,
+	DESC92C_RATEMCS11 = 0x17,
+	DESC92C_RATEMCS12 = 0x18,
+	DESC92C_RATEMCS13 = 0x19,
+	DESC92C_RATEMCS14 = 0x1a,
+	DESC92C_RATEMCS15 = 0x1b,
+	DESC92C_RATEMCS15_SG = 0x1c,
+	DESC92C_RATEMCS32 = 0x20,
+};
+
+struct phy_sts_cck_8192s_t {
+	u8 adc_pwdb_X[4];
+	u8 sq_rpt;
+	u8 cck_agc_rpt;
+};
+
+struct h2c_cmd_8192c {
+	u8 element_id;
+	u32 cmd_len;
+	u8 *p_cmdbuffer;
+};
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/dm.c b/drivers/net/wireless/rtlwifi/rtl8192ce/dm.c
new file mode 100644
index 00000000000..62e7c64e087
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/dm.c
@@ -0,0 +1,1473 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+
+struct dig_t dm_digtable;
+static struct ps_t dm_pstable;
+
+static const u32 ofdmswing_table[OFDM_TABLE_SIZE] = {
+	0x7f8001fe,
+	0x788001e2,
+	0x71c001c7,
+	0x6b8001ae,
+	0x65400195,
+	0x5fc0017f,
+	0x5a400169,
+	0x55400155,
+	0x50800142,
+	0x4c000130,
+	0x47c0011f,
+	0x43c0010f,
+	0x40000100,
+	0x3c8000f2,
+	0x390000e4,
+	0x35c000d7,
+	0x32c000cb,
+	0x300000c0,
+	0x2d4000b5,
+	0x2ac000ab,
+	0x288000a2,
+	0x26000098,
+	0x24000090,
+	0x22000088,
+	0x20000080,
+	0x1e400079,
+	0x1c800072,
+	0x1b00006c,
+	0x19800066,
+	0x18000060,
+	0x16c0005b,
+	0x15800056,
+	0x14400051,
+	0x1300004c,
+	0x12000048,
+	0x11000044,
+	0x10000040,
+};
+
+static const u8 cckswing_table_ch1ch13[CCK_TABLE_SIZE][8] = {
+	{0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04},
+	{0x33, 0x32, 0x2b, 0x23, 0x1a, 0x11, 0x08, 0x04},
+	{0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03},
+	{0x2d, 0x2d, 0x27, 0x1f, 0x18, 0x0f, 0x08, 0x03},
+	{0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03},
+	{0x28, 0x28, 0x22, 0x1c, 0x15, 0x0d, 0x07, 0x03},
+	{0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03},
+	{0x24, 0x23, 0x1f, 0x19, 0x13, 0x0c, 0x06, 0x03},
+	{0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02},
+	{0x20, 0x20, 0x1b, 0x16, 0x11, 0x08, 0x05, 0x02},
+	{0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02},
+	{0x1d, 0x1c, 0x18, 0x14, 0x0f, 0x0a, 0x05, 0x02},
+	{0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02},
+	{0x1a, 0x19, 0x16, 0x12, 0x0d, 0x09, 0x04, 0x02},
+	{0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02},
+	{0x17, 0x16, 0x13, 0x10, 0x0c, 0x08, 0x04, 0x02},
+	{0x16, 0x15, 0x12, 0x0f, 0x0b, 0x07, 0x04, 0x01},
+	{0x14, 0x14, 0x11, 0x0e, 0x0b, 0x07, 0x03, 0x02},
+	{0x13, 0x13, 0x10, 0x0d, 0x0a, 0x06, 0x03, 0x01},
+	{0x12, 0x12, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01},
+	{0x11, 0x11, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01},
+	{0x10, 0x10, 0x0e, 0x0b, 0x08, 0x05, 0x03, 0x01},
+	{0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01},
+	{0x0e, 0x0e, 0x0c, 0x0a, 0x08, 0x05, 0x02, 0x01},
+	{0x0d, 0x0d, 0x0c, 0x0a, 0x07, 0x05, 0x02, 0x01},
+	{0x0d, 0x0c, 0x0b, 0x09, 0x07, 0x04, 0x02, 0x01},
+	{0x0c, 0x0c, 0x0a, 0x09, 0x06, 0x04, 0x02, 0x01},
+	{0x0b, 0x0b, 0x0a, 0x08, 0x06, 0x04, 0x02, 0x01},
+	{0x0b, 0x0a, 0x09, 0x08, 0x06, 0x04, 0x02, 0x01},
+	{0x0a, 0x0a, 0x09, 0x07, 0x05, 0x03, 0x02, 0x01},
+	{0x0a, 0x09, 0x08, 0x07, 0x05, 0x03, 0x02, 0x01},
+	{0x09, 0x09, 0x08, 0x06, 0x05, 0x03, 0x01, 0x01},
+	{0x09, 0x08, 0x07, 0x06, 0x04, 0x03, 0x01, 0x01}
+};
+
+static const u8 cckswing_table_ch14[CCK_TABLE_SIZE][8] = {
+	{0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00},
+	{0x33, 0x32, 0x2b, 0x19, 0x00, 0x00, 0x00, 0x00},
+	{0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00},
+	{0x2d, 0x2d, 0x17, 0x17, 0x00, 0x00, 0x00, 0x00},
+	{0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00},
+	{0x28, 0x28, 0x24, 0x14, 0x00, 0x00, 0x00, 0x00},
+	{0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00},
+	{0x24, 0x23, 0x1f, 0x12, 0x00, 0x00, 0x00, 0x00},
+	{0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00},
+	{0x20, 0x20, 0x1b, 0x10, 0x00, 0x00, 0x00, 0x00},
+	{0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00},
+	{0x1d, 0x1c, 0x18, 0x0e, 0x00, 0x00, 0x00, 0x00},
+	{0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00},
+	{0x1a, 0x19, 0x16, 0x0d, 0x00, 0x00, 0x00, 0x00},
+	{0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00},
+	{0x17, 0x16, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x00},
+	{0x16, 0x15, 0x12, 0x0b, 0x00, 0x00, 0x00, 0x00},
+	{0x14, 0x14, 0x11, 0x0a, 0x00, 0x00, 0x00, 0x00},
+	{0x13, 0x13, 0x10, 0x0a, 0x00, 0x00, 0x00, 0x00},
+	{0x12, 0x12, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00},
+	{0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00},
+	{0x10, 0x10, 0x0e, 0x08, 0x00, 0x00, 0x00, 0x00},
+	{0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00},
+	{0x0e, 0x0e, 0x0c, 0x07, 0x00, 0x00, 0x00, 0x00},
+	{0x0d, 0x0d, 0x0c, 0x07, 0x00, 0x00, 0x00, 0x00},
+	{0x0d, 0x0c, 0x0b, 0x06, 0x00, 0x00, 0x00, 0x00},
+	{0x0c, 0x0c, 0x0a, 0x06, 0x00, 0x00, 0x00, 0x00},
+	{0x0b, 0x0b, 0x0a, 0x06, 0x00, 0x00, 0x00, 0x00},
+	{0x0b, 0x0a, 0x09, 0x05, 0x00, 0x00, 0x00, 0x00},
+	{0x0a, 0x0a, 0x09, 0x05, 0x00, 0x00, 0x00, 0x00},
+	{0x0a, 0x09, 0x08, 0x05, 0x00, 0x00, 0x00, 0x00},
+	{0x09, 0x09, 0x08, 0x05, 0x00, 0x00, 0x00, 0x00},
+	{0x09, 0x08, 0x07, 0x04, 0x00, 0x00, 0x00, 0x00}
+};
+
+static void rtl92c_dm_diginit(struct ieee80211_hw *hw)
+{
+	dm_digtable.dig_enable_flag = true;
+	dm_digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
+	dm_digtable.cur_igvalue = 0x20;
+	dm_digtable.pre_igvalue = 0x0;
+	dm_digtable.cursta_connectctate = DIG_STA_DISCONNECT;
+	dm_digtable.presta_connectstate = DIG_STA_DISCONNECT;
+	dm_digtable.curmultista_connectstate = DIG_MULTISTA_DISCONNECT;
+	dm_digtable.rssi_lowthresh = DM_DIG_THRESH_LOW;
+	dm_digtable.rssi_highthresh = DM_DIG_THRESH_HIGH;
+	dm_digtable.fa_lowthresh = DM_FALSEALARM_THRESH_LOW;
+	dm_digtable.fa_highthresh = DM_FALSEALARM_THRESH_HIGH;
+	dm_digtable.rx_gain_range_max = DM_DIG_MAX;
+	dm_digtable.rx_gain_range_min = DM_DIG_MIN;
+	dm_digtable.backoff_val = DM_DIG_BACKOFF_DEFAULT;
+	dm_digtable.backoff_val_range_max = DM_DIG_BACKOFF_MAX;
+	dm_digtable.backoff_val_range_min = DM_DIG_BACKOFF_MIN;
+	dm_digtable.pre_cck_pd_state = CCK_PD_STAGE_MAX;
+	dm_digtable.cur_cck_pd_state = CCK_PD_STAGE_MAX;
+}
+
+static u8 rtl92c_dm_initial_gain_min_pwdb(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	long rssi_val_min = 0;
+
+	if ((dm_digtable.curmultista_connectstate == DIG_MULTISTA_CONNECT) &&
+	    (dm_digtable.cursta_connectctate == DIG_STA_CONNECT)) {
+		if (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb != 0)
+			rssi_val_min =
+			    (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb >
+			     rtlpriv->dm.undecorated_smoothed_pwdb) ?
+			    rtlpriv->dm.undecorated_smoothed_pwdb :
+			    rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+		else
+			rssi_val_min = rtlpriv->dm.undecorated_smoothed_pwdb;
+	} else if (dm_digtable.cursta_connectctate == DIG_STA_CONNECT ||
+		   dm_digtable.cursta_connectctate == DIG_STA_BEFORE_CONNECT) {
+		rssi_val_min = rtlpriv->dm.undecorated_smoothed_pwdb;
+	} else if (dm_digtable.curmultista_connectstate ==
+		   DIG_MULTISTA_CONNECT) {
+		rssi_val_min = rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+	}
+
+	return (u8) rssi_val_min;
+}
+
+static void rtl92c_dm_false_alarm_counter_statistics(struct ieee80211_hw *hw)
+{
+	u32 ret_value;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct false_alarm_statistics *falsealm_cnt = &(rtlpriv->falsealm_cnt);
+
+	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER1, MASKDWORD);
+	falsealm_cnt->cnt_parity_fail = ((ret_value & 0xffff0000) >> 16);
+
+	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER2, MASKDWORD);
+	falsealm_cnt->cnt_rate_illegal = (ret_value & 0xffff);
+	falsealm_cnt->cnt_crc8_fail = ((ret_value & 0xffff0000) >> 16);
+
+	ret_value = rtl_get_bbreg(hw, ROFDM_PHYCOUNTER3, MASKDWORD);
+	falsealm_cnt->cnt_mcs_fail = (ret_value & 0xffff);
+	falsealm_cnt->cnt_ofdm_fail = falsealm_cnt->cnt_parity_fail +
+	    falsealm_cnt->cnt_rate_illegal +
+	    falsealm_cnt->cnt_crc8_fail + falsealm_cnt->cnt_mcs_fail;
+
+	rtl_set_bbreg(hw, RCCK0_FALSEALARMREPORT, BIT(14), 1);
+	ret_value = rtl_get_bbreg(hw, RCCK0_FACOUNTERLOWER, MASKBYTE0);
+	falsealm_cnt->cnt_cck_fail = ret_value;
+
+	ret_value = rtl_get_bbreg(hw, RCCK0_FACOUNTERUPPER, MASKBYTE3);
+	falsealm_cnt->cnt_cck_fail += (ret_value & 0xff) << 8;
+	falsealm_cnt->cnt_all = (falsealm_cnt->cnt_parity_fail +
+				 falsealm_cnt->cnt_rate_illegal +
+				 falsealm_cnt->cnt_crc8_fail +
+				 falsealm_cnt->cnt_mcs_fail +
+				 falsealm_cnt->cnt_cck_fail);
+
+	rtl_set_bbreg(hw, ROFDM1_LSTF, 0x08000000, 1);
+	rtl_set_bbreg(hw, ROFDM1_LSTF, 0x08000000, 0);
+	rtl_set_bbreg(hw, RCCK0_FALSEALARMREPORT, 0x0000c000, 0);
+	rtl_set_bbreg(hw, RCCK0_FALSEALARMREPORT, 0x0000c000, 2);
+
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_TRACE,
+		 ("cnt_parity_fail = %d, cnt_rate_illegal = %d, "
+		  "cnt_crc8_fail = %d, cnt_mcs_fail = %d\n",
+		  falsealm_cnt->cnt_parity_fail,
+		  falsealm_cnt->cnt_rate_illegal,
+		  falsealm_cnt->cnt_crc8_fail, falsealm_cnt->cnt_mcs_fail));
+
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_TRACE,
+		 ("cnt_ofdm_fail = %x, cnt_cck_fail = %x, cnt_all = %x\n",
+		  falsealm_cnt->cnt_ofdm_fail,
+		  falsealm_cnt->cnt_cck_fail, falsealm_cnt->cnt_all));
+}
+
+static void rtl92c_dm_ctrl_initgain_by_fa(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 value_igi = dm_digtable.cur_igvalue;
+
+	if (rtlpriv->falsealm_cnt.cnt_all < DM_DIG_FA_TH0)
+		value_igi--;
+	else if (rtlpriv->falsealm_cnt.cnt_all < DM_DIG_FA_TH1)
+		value_igi += 0;
+	else if (rtlpriv->falsealm_cnt.cnt_all < DM_DIG_FA_TH2)
+		value_igi++;
+	else if (rtlpriv->falsealm_cnt.cnt_all >= DM_DIG_FA_TH2)
+		value_igi += 2;
+	if (value_igi > DM_DIG_FA_UPPER)
+		value_igi = DM_DIG_FA_UPPER;
+	else if (value_igi < DM_DIG_FA_LOWER)
+		value_igi = DM_DIG_FA_LOWER;
+	if (rtlpriv->falsealm_cnt.cnt_all > 10000)
+		value_igi = 0x32;
+
+	dm_digtable.cur_igvalue = value_igi;
+	rtl92c_dm_write_dig(hw);
+}
+
+static void rtl92c_dm_ctrl_initgain_by_rssi(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->falsealm_cnt.cnt_all > dm_digtable.fa_highthresh) {
+		if ((dm_digtable.backoff_val - 2) <
+		    dm_digtable.backoff_val_range_min)
+			dm_digtable.backoff_val =
+			    dm_digtable.backoff_val_range_min;
+		else
+			dm_digtable.backoff_val -= 2;
+	} else if (rtlpriv->falsealm_cnt.cnt_all < dm_digtable.fa_lowthresh) {
+		if ((dm_digtable.backoff_val + 2) >
+		    dm_digtable.backoff_val_range_max)
+			dm_digtable.backoff_val =
+			    dm_digtable.backoff_val_range_max;
+		else
+			dm_digtable.backoff_val += 2;
+	}
+
+	if ((dm_digtable.rssi_val_min + 10 - dm_digtable.backoff_val) >
+	    dm_digtable.rx_gain_range_max)
+		dm_digtable.cur_igvalue = dm_digtable.rx_gain_range_max;
+	else if ((dm_digtable.rssi_val_min + 10 -
+		  dm_digtable.backoff_val) < dm_digtable.rx_gain_range_min)
+		dm_digtable.cur_igvalue = dm_digtable.rx_gain_range_min;
+	else
+		dm_digtable.cur_igvalue = dm_digtable.rssi_val_min + 10 -
+		    dm_digtable.backoff_val;
+
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_TRACE,
+		 ("rssi_val_min = %x backoff_val %x\n",
+		  dm_digtable.rssi_val_min, dm_digtable.backoff_val));
+
+	rtl92c_dm_write_dig(hw);
+}
+
+static void rtl92c_dm_initial_gain_multi_sta(struct ieee80211_hw *hw)
+{
+	static u8 binitialized; /* initialized to false */
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	long rssi_strength = rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+	bool b_multi_sta = false;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		b_multi_sta = true;
+
+	if ((b_multi_sta == false) || (dm_digtable.cursta_connectctate !=
+				       DIG_STA_DISCONNECT)) {
+		binitialized = false;
+		dm_digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
+		return;
+	} else if (binitialized == false) {
+		binitialized = true;
+		dm_digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_0;
+		dm_digtable.cur_igvalue = 0x20;
+		rtl92c_dm_write_dig(hw);
+	}
+
+	if (dm_digtable.curmultista_connectstate == DIG_MULTISTA_CONNECT) {
+		if ((rssi_strength < dm_digtable.rssi_lowthresh) &&
+		    (dm_digtable.dig_ext_port_stage != DIG_EXT_PORT_STAGE_1)) {
+
+			if (dm_digtable.dig_ext_port_stage ==
+			    DIG_EXT_PORT_STAGE_2) {
+				dm_digtable.cur_igvalue = 0x20;
+				rtl92c_dm_write_dig(hw);
+			}
+
+			dm_digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_1;
+		} else if (rssi_strength > dm_digtable.rssi_highthresh) {
+			dm_digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_2;
+			rtl92c_dm_ctrl_initgain_by_fa(hw);
+		}
+	} else if (dm_digtable.dig_ext_port_stage != DIG_EXT_PORT_STAGE_0) {
+		dm_digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_0;
+		dm_digtable.cur_igvalue = 0x20;
+		rtl92c_dm_write_dig(hw);
+	}
+
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_TRACE,
+		 ("curmultista_connectstate = "
+		  "%x dig_ext_port_stage %x\n",
+		  dm_digtable.curmultista_connectstate,
+		  dm_digtable.dig_ext_port_stage));
+}
+
+static void rtl92c_dm_initial_gain_sta(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_TRACE,
+		 ("presta_connectstate = %x,"
+		  " cursta_connectctate = %x\n",
+		  dm_digtable.presta_connectstate,
+		  dm_digtable.cursta_connectctate));
+
+	if (dm_digtable.presta_connectstate == dm_digtable.cursta_connectctate
+	    || dm_digtable.cursta_connectctate == DIG_STA_BEFORE_CONNECT
+	    || dm_digtable.cursta_connectctate == DIG_STA_CONNECT) {
+
+		if (dm_digtable.cursta_connectctate != DIG_STA_DISCONNECT) {
+			dm_digtable.rssi_val_min =
+			    rtl92c_dm_initial_gain_min_pwdb(hw);
+			rtl92c_dm_ctrl_initgain_by_rssi(hw);
+		}
+	} else {
+		dm_digtable.rssi_val_min = 0;
+		dm_digtable.dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
+		dm_digtable.backoff_val = DM_DIG_BACKOFF_DEFAULT;
+		dm_digtable.cur_igvalue = 0x20;
+		dm_digtable.pre_igvalue = 0;
+		rtl92c_dm_write_dig(hw);
+	}
+}
+
+static void rtl92c_dm_cck_packet_detection_thresh(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (dm_digtable.cursta_connectctate == DIG_STA_CONNECT) {
+		dm_digtable.rssi_val_min = rtl92c_dm_initial_gain_min_pwdb(hw);
+
+		if (dm_digtable.pre_cck_pd_state == CCK_PD_STAGE_LowRssi) {
+			if (dm_digtable.rssi_val_min <= 25)
+				dm_digtable.cur_cck_pd_state =
+				    CCK_PD_STAGE_LowRssi;
+			else
+				dm_digtable.cur_cck_pd_state =
+				    CCK_PD_STAGE_HighRssi;
+		} else {
+			if (dm_digtable.rssi_val_min <= 20)
+				dm_digtable.cur_cck_pd_state =
+				    CCK_PD_STAGE_LowRssi;
+			else
+				dm_digtable.cur_cck_pd_state =
+				    CCK_PD_STAGE_HighRssi;
+		}
+	} else {
+		dm_digtable.cur_cck_pd_state = CCK_PD_STAGE_MAX;
+	}
+
+	if (dm_digtable.pre_cck_pd_state != dm_digtable.cur_cck_pd_state) {
+		if (dm_digtable.cur_cck_pd_state == CCK_PD_STAGE_LowRssi) {
+			if (rtlpriv->falsealm_cnt.cnt_cck_fail > 800)
+				dm_digtable.cur_cck_fa_state =
+				    CCK_FA_STAGE_High;
+			else
+				dm_digtable.cur_cck_fa_state = CCK_FA_STAGE_Low;
+
+			if (dm_digtable.pre_cck_fa_state !=
+			    dm_digtable.cur_cck_fa_state) {
+				if (dm_digtable.cur_cck_fa_state ==
+				    CCK_FA_STAGE_Low)
+					rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2,
+						      0x83);
+				else
+					rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2,
+						      0xcd);
+
+				dm_digtable.pre_cck_fa_state =
+				    dm_digtable.cur_cck_fa_state;
+			}
+
+			rtl_set_bbreg(hw, RCCK0_SYSTEM, MASKBYTE1, 0x40);
+
+			if (IS_92C_SERIAL(rtlhal->version))
+				rtl_set_bbreg(hw, RCCK0_FALSEALARMREPORT,
+					      MASKBYTE2, 0xd7);
+		} else {
+			rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+			rtl_set_bbreg(hw, RCCK0_SYSTEM, MASKBYTE1, 0x47);
+
+			if (IS_92C_SERIAL(rtlhal->version))
+				rtl_set_bbreg(hw, RCCK0_FALSEALARMREPORT,
+					      MASKBYTE2, 0xd3);
+		}
+		dm_digtable.pre_cck_pd_state = dm_digtable.cur_cck_pd_state;
+	}
+
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_TRACE,
+		 ("CCKPDStage=%x\n", dm_digtable.cur_cck_pd_state));
+
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_TRACE,
+		 ("is92C=%x\n", IS_92C_SERIAL(rtlhal->version)));
+}
+
+static void rtl92c_dm_ctrl_initgain_by_twoport(struct ieee80211_hw *hw)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	if (mac->act_scanning == true)
+		return;
+
+	if ((mac->link_state > MAC80211_NOLINK) &&
+	    (mac->link_state < MAC80211_LINKED))
+		dm_digtable.cursta_connectctate = DIG_STA_BEFORE_CONNECT;
+	else if (mac->link_state >= MAC80211_LINKED)
+		dm_digtable.cursta_connectctate = DIG_STA_CONNECT;
+	else
+		dm_digtable.cursta_connectctate = DIG_STA_DISCONNECT;
+
+	rtl92c_dm_initial_gain_sta(hw);
+	rtl92c_dm_initial_gain_multi_sta(hw);
+	rtl92c_dm_cck_packet_detection_thresh(hw);
+
+	dm_digtable.presta_connectstate = dm_digtable.cursta_connectctate;
+
+}
+
+static void rtl92c_dm_dig(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->dm.b_dm_initialgain_enable == false)
+		return;
+	if (dm_digtable.dig_enable_flag == false)
+		return;
+
+	rtl92c_dm_ctrl_initgain_by_twoport(hw);
+
+}
+
+static void rtl92c_dm_init_dynamic_txpower(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.bdynamic_txpower_enable = false;
+
+	rtlpriv->dm.last_dtp_lvl = TXHIGHPWRLEVEL_NORMAL;
+	rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+}
+
+static void rtl92c_dm_dynamic_txpower(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	long undecorated_smoothed_pwdb;
+
+	if (!rtlpriv->dm.bdynamic_txpower_enable)
+		return;
+
+	if (rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) {
+		rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+		return;
+	}
+
+	if ((mac->link_state < MAC80211_LINKED) &&
+	    (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb == 0)) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+			 ("Not connected to any\n"));
+
+		rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+
+		rtlpriv->dm.last_dtp_lvl = TXHIGHPWRLEVEL_NORMAL;
+		return;
+	}
+
+	if (mac->link_state >= MAC80211_LINKED) {
+		if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+			undecorated_smoothed_pwdb =
+			    rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				 ("AP Client PWDB = 0x%lx\n",
+				  undecorated_smoothed_pwdb));
+		} else {
+			undecorated_smoothed_pwdb =
+			    rtlpriv->dm.undecorated_smoothed_pwdb;
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				 ("STA Default Port PWDB = 0x%lx\n",
+				  undecorated_smoothed_pwdb));
+		}
+	} else {
+		undecorated_smoothed_pwdb =
+		    rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("AP Ext Port PWDB = 0x%lx\n",
+			  undecorated_smoothed_pwdb));
+	}
+
+	if (undecorated_smoothed_pwdb >= TX_POWER_NEAR_FIELD_THRESH_LVL2) {
+		rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_LEVEL1;
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("TXHIGHPWRLEVEL_LEVEL1 (TxPwr=0x0)\n"));
+	} else if ((undecorated_smoothed_pwdb <
+		    (TX_POWER_NEAR_FIELD_THRESH_LVL2 - 3)) &&
+		   (undecorated_smoothed_pwdb >=
+		    TX_POWER_NEAR_FIELD_THRESH_LVL1)) {
+
+		rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_LEVEL1;
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("TXHIGHPWRLEVEL_LEVEL1 (TxPwr=0x10)\n"));
+	} else if (undecorated_smoothed_pwdb <
+		   (TX_POWER_NEAR_FIELD_THRESH_LVL1 - 5)) {
+		rtlpriv->dm.dynamic_txhighpower_lvl = TXHIGHPWRLEVEL_NORMAL;
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("TXHIGHPWRLEVEL_NORMAL\n"));
+	}
+
+	if ((rtlpriv->dm.dynamic_txhighpower_lvl != rtlpriv->dm.last_dtp_lvl)) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("PHY_SetTxPowerLevel8192S() Channel = %d\n",
+			  rtlphy->current_channel));
+		rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel);
+	}
+
+	rtlpriv->dm.last_dtp_lvl = rtlpriv->dm.dynamic_txhighpower_lvl;
+}
+
+void rtl92c_dm_write_dig(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_DIG, DBG_LOUD,
+		 ("cur_igvalue = 0x%x, "
+		  "pre_igvalue = 0x%x, backoff_val = %d\n",
+		  dm_digtable.cur_igvalue, dm_digtable.pre_igvalue,
+		  dm_digtable.backoff_val));
+
+	if (dm_digtable.pre_igvalue != dm_digtable.cur_igvalue) {
+		rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, 0x7f,
+			      dm_digtable.cur_igvalue);
+		rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, 0x7f,
+			      dm_digtable.cur_igvalue);
+
+		dm_digtable.pre_igvalue = dm_digtable.cur_igvalue;
+	}
+}
+
+static void rtl92c_dm_pwdb_monitor(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	long tmpentry_max_pwdb = 0, tmpentry_min_pwdb = 0xff;
+
+	u8 h2c_parameter[3] = { 0 };
+
+	return;
+
+	if (tmpentry_max_pwdb != 0) {
+		rtlpriv->dm.entry_max_undecoratedsmoothed_pwdb =
+		    tmpentry_max_pwdb;
+	} else {
+		rtlpriv->dm.entry_max_undecoratedsmoothed_pwdb = 0;
+	}
+
+	if (tmpentry_min_pwdb != 0xff) {
+		rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb =
+		    tmpentry_min_pwdb;
+	} else {
+		rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb = 0;
+	}
+
+	h2c_parameter[2] = (u8) (rtlpriv->dm.undecorated_smoothed_pwdb & 0xFF);
+	h2c_parameter[0] = 0;
+
+	rtl92c_fill_h2c_cmd(hw, H2C_RSSI_REPORT, 3, h2c_parameter);
+}
+
+void rtl92c_dm_init_edca_turbo(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	rtlpriv->dm.bcurrent_turbo_edca = false;
+	rtlpriv->dm.bis_any_nonbepkts = false;
+	rtlpriv->dm.bis_cur_rdlstate = false;
+}
+
+static void rtl92c_dm_check_edca_turbo(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	static u64 last_txok_cnt;
+	static u64 last_rxok_cnt;
+	u64 cur_txok_cnt;
+	u64 cur_rxok_cnt;
+	u32 edca_be_ul = 0x5ea42b;
+	u32 edca_be_dl = 0x5ea42b;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		goto dm_checkedcaturbo_exit;
+
+	if (mac->link_state != MAC80211_LINKED) {
+		rtlpriv->dm.bcurrent_turbo_edca = false;
+		return;
+	}
+
+	if (!mac->ht_enable) {	/*FIX MERGE */
+		if (!(edca_be_ul & 0xffff0000))
+			edca_be_ul |= 0x005e0000;
+
+		if (!(edca_be_dl & 0xffff0000))
+			edca_be_dl |= 0x005e0000;
+	}
+
+	if ((!rtlpriv->dm.bis_any_nonbepkts) &&
+	    (!rtlpriv->dm.b_disable_framebursting)) {
+		cur_txok_cnt = rtlpriv->stats.txbytesunicast - last_txok_cnt;
+		cur_rxok_cnt = rtlpriv->stats.rxbytesunicast - last_rxok_cnt;
+		if (cur_rxok_cnt > 4 * cur_txok_cnt) {
+			if (!rtlpriv->dm.bis_cur_rdlstate ||
+			    !rtlpriv->dm.bcurrent_turbo_edca) {
+				rtl_write_dword(rtlpriv,
+						REG_EDCA_BE_PARAM,
+						edca_be_dl);
+				rtlpriv->dm.bis_cur_rdlstate = true;
+			}
+		} else {
+			if (rtlpriv->dm.bis_cur_rdlstate ||
+			    !rtlpriv->dm.bcurrent_turbo_edca) {
+				rtl_write_dword(rtlpriv,
+						REG_EDCA_BE_PARAM,
+						edca_be_ul);
+				rtlpriv->dm.bis_cur_rdlstate = false;
+			}
+		}
+		rtlpriv->dm.bcurrent_turbo_edca = true;
+	} else {
+		if (rtlpriv->dm.bcurrent_turbo_edca) {
+			u8 tmp = AC0_BE;
+			rtlpriv->cfg->ops->set_hw_reg(hw,
+						      HW_VAR_AC_PARAM,
+						      (u8 *) (&tmp));
+			rtlpriv->dm.bcurrent_turbo_edca = false;
+		}
+	}
+
+dm_checkedcaturbo_exit:
+	rtlpriv->dm.bis_any_nonbepkts = false;
+	last_txok_cnt = rtlpriv->stats.txbytesunicast;
+	last_rxok_cnt = rtlpriv->stats.rxbytesunicast;
+}
+
+static void rtl92c_dm_txpower_tracking_callback_thermalmeter(struct ieee80211_hw
+							     *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 thermalvalue, delta, delta_lck, delta_iqk;
+	long ele_a, ele_d, temp_cck, val_x, value32;
+	long val_y, ele_c;
+	u8 ofdm_index[2], cck_index, ofdm_index_old[2], cck_index_old;
+	int i;
+	bool is2t = IS_92C_SERIAL(rtlhal->version);
+	u8 txpwr_level[2] = {0, 0};
+	u8 ofdm_min_index = 6, rf;
+
+	rtlpriv->dm.btxpower_trackingInit = true;
+	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+		 ("rtl92c_dm_txpower_tracking_callback_thermalmeter\n"));
+
+	thermalvalue = (u8) rtl_get_rfreg(hw, RF90_PATH_A, RF_T_METER, 0x1f);
+
+	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+		 ("Readback Thermal Meter = 0x%x pre thermal meter 0x%x "
+		  "eeprom_thermalmeter 0x%x\n",
+		  thermalvalue, rtlpriv->dm.thermalvalue,
+		  rtlefuse->eeprom_thermalmeter));
+
+	rtl92c_phy_ap_calibrate(hw, (thermalvalue -
+				     rtlefuse->eeprom_thermalmeter));
+	if (is2t)
+		rf = 2;
+	else
+		rf = 1;
+
+	if (thermalvalue) {
+		ele_d = rtl_get_bbreg(hw, ROFDM0_XATXIQIMBALANCE,
+				      MASKDWORD) & MASKOFDM_D;
+
+		for (i = 0; i < OFDM_TABLE_LENGTH; i++) {
+			if (ele_d == (ofdmswing_table[i] & MASKOFDM_D)) {
+				ofdm_index_old[0] = (u8) i;
+
+				RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+					("Initial pathA ele_d reg0x%x = 0x%lx, "
+					 "ofdm_index=0x%x\n",
+					 ROFDM0_XATXIQIMBALANCE,
+					 ele_d, ofdm_index_old[0]));
+				break;
+			}
+		}
+
+		if (is2t) {
+			ele_d = rtl_get_bbreg(hw, ROFDM0_XBTXIQIMBALANCE,
+					      MASKDWORD) & MASKOFDM_D;
+
+			for (i = 0; i < OFDM_TABLE_LENGTH; i++) {
+				if (ele_d == (ofdmswing_table[i] & MASKOFDM_D)) {
+					ofdm_index_old[1] = (u8) i;
+
+					RT_TRACE(rtlpriv, COMP_POWER_TRACKING,
+					   DBG_LOUD,
+					   ("Initial pathB ele_d reg0x%x = "
+					   "0x%lx, ofdm_index=0x%x\n",
+					   ROFDM0_XBTXIQIMBALANCE, ele_d,
+					   ofdm_index_old[1]));
+					break;
+				}
+			}
+		}
+
+		temp_cck =
+		    rtl_get_bbreg(hw, RCCK0_TXFILTER2, MASKDWORD) & MASKCCK;
+
+		for (i = 0; i < CCK_TABLE_LENGTH; i++) {
+			if (rtlpriv->dm.b_cck_inch14) {
+				if (memcmp((void *)&temp_cck,
+					   (void *)&cckswing_table_ch14[i][2],
+					   4) == 0) {
+					cck_index_old = (u8) i;
+
+					RT_TRACE(rtlpriv, COMP_POWER_TRACKING,
+						 DBG_LOUD,
+						 ("Initial reg0x%x = 0x%lx, "
+						  "cck_index=0x%x, ch 14 %d\n",
+						  RCCK0_TXFILTER2, temp_cck,
+						  cck_index_old,
+						  rtlpriv->dm.b_cck_inch14));
+					break;
+				}
+			} else {
+				if (memcmp((void *)&temp_cck,
+					   (void *)
+					   &cckswing_table_ch1ch13[i][2],
+					   4) == 0) {
+					cck_index_old = (u8) i;
+
+					RT_TRACE(rtlpriv, COMP_POWER_TRACKING,
+						 DBG_LOUD,
+						 ("Initial reg0x%x = 0x%lx, "
+						  "cck_index=0x%x, ch14 %d\n",
+						  RCCK0_TXFILTER2, temp_cck,
+						  cck_index_old,
+						  rtlpriv->dm.b_cck_inch14));
+					break;
+				}
+			}
+		}
+
+		if (!rtlpriv->dm.thermalvalue) {
+			rtlpriv->dm.thermalvalue =
+			    rtlefuse->eeprom_thermalmeter;
+			rtlpriv->dm.thermalvalue_lck = thermalvalue;
+			rtlpriv->dm.thermalvalue_iqk = thermalvalue;
+			for (i = 0; i < rf; i++)
+				rtlpriv->dm.ofdm_index[i] = ofdm_index_old[i];
+			rtlpriv->dm.cck_index = cck_index_old;
+		}
+
+		delta = (thermalvalue > rtlpriv->dm.thermalvalue) ?
+		    (thermalvalue - rtlpriv->dm.thermalvalue) :
+		    (rtlpriv->dm.thermalvalue - thermalvalue);
+
+		delta_lck = (thermalvalue > rtlpriv->dm.thermalvalue_lck) ?
+		    (thermalvalue - rtlpriv->dm.thermalvalue_lck) :
+		    (rtlpriv->dm.thermalvalue_lck - thermalvalue);
+
+		delta_iqk = (thermalvalue > rtlpriv->dm.thermalvalue_iqk) ?
+		    (thermalvalue - rtlpriv->dm.thermalvalue_iqk) :
+		    (rtlpriv->dm.thermalvalue_iqk - thermalvalue);
+
+		RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+			("Readback Thermal Meter = 0x%x pre thermal meter 0x%x "
+			 "eeprom_thermalmeter 0x%x delta 0x%x "
+			 "delta_lck 0x%x delta_iqk 0x%x\n",
+			 thermalvalue, rtlpriv->dm.thermalvalue,
+			 rtlefuse->eeprom_thermalmeter, delta, delta_lck,
+			 delta_iqk));
+
+		if (delta_lck > 1) {
+			rtlpriv->dm.thermalvalue_lck = thermalvalue;
+			rtl92c_phy_lc_calibrate(hw);
+		}
+
+		if (delta > 0 && rtlpriv->dm.txpower_track_control) {
+			if (thermalvalue > rtlpriv->dm.thermalvalue) {
+				for (i = 0; i < rf; i++)
+					rtlpriv->dm.ofdm_index[i] -= delta;
+				rtlpriv->dm.cck_index -= delta;
+			} else {
+				for (i = 0; i < rf; i++)
+					rtlpriv->dm.ofdm_index[i] += delta;
+				rtlpriv->dm.cck_index += delta;
+			}
+
+			if (is2t) {
+				RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+					 ("temp OFDM_A_index=0x%x, "
+					  "OFDM_B_index=0x%x,"
+					  "cck_index=0x%x\n",
+					  rtlpriv->dm.ofdm_index[0],
+					  rtlpriv->dm.ofdm_index[1],
+					  rtlpriv->dm.cck_index));
+			} else {
+				RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+					 ("temp OFDM_A_index=0x%x,"
+					  "cck_index=0x%x\n",
+					  rtlpriv->dm.ofdm_index[0],
+					  rtlpriv->dm.cck_index));
+			}
+
+			if (thermalvalue > rtlefuse->eeprom_thermalmeter) {
+				for (i = 0; i < rf; i++)
+					ofdm_index[i] =
+					    rtlpriv->dm.ofdm_index[i]
+					    + 1;
+				cck_index = rtlpriv->dm.cck_index + 1;
+			} else {
+				for (i = 0; i < rf; i++)
+					ofdm_index[i] =
+					    rtlpriv->dm.ofdm_index[i];
+				cck_index = rtlpriv->dm.cck_index;
+			}
+
+			for (i = 0; i < rf; i++) {
+				if (txpwr_level[i] >= 0 &&
+				    txpwr_level[i] <= 26) {
+					if (thermalvalue >
+					    rtlefuse->eeprom_thermalmeter) {
+						if (delta < 5)
+							ofdm_index[i] -= 1;
+
+						else
+							ofdm_index[i] -= 2;
+					} else if (delta > 5 && thermalvalue <
+						   rtlefuse->
+						   eeprom_thermalmeter) {
+						ofdm_index[i] += 1;
+					}
+				} else if (txpwr_level[i] >= 27 &&
+					   txpwr_level[i] <= 32
+					   && thermalvalue >
+					   rtlefuse->eeprom_thermalmeter) {
+					if (delta < 5)
+						ofdm_index[i] -= 1;
+
+					else
+						ofdm_index[i] -= 2;
+				} else if (txpwr_level[i] >= 32 &&
+					   txpwr_level[i] <= 38 &&
+					   thermalvalue >
+					   rtlefuse->eeprom_thermalmeter
+					   && delta > 5) {
+					ofdm_index[i] -= 1;
+				}
+			}
+
+			if (txpwr_level[i] >= 0 && txpwr_level[i] <= 26) {
+				if (thermalvalue >
+				    rtlefuse->eeprom_thermalmeter) {
+					if (delta < 5)
+						cck_index -= 1;
+
+					else
+						cck_index -= 2;
+				} else if (delta > 5 && thermalvalue <
+					   rtlefuse->eeprom_thermalmeter) {
+					cck_index += 1;
+				}
+			} else if (txpwr_level[i] >= 27 &&
+				   txpwr_level[i] <= 32 &&
+				   thermalvalue >
+				   rtlefuse->eeprom_thermalmeter) {
+				if (delta < 5)
+					cck_index -= 1;
+
+				else
+					cck_index -= 2;
+			} else if (txpwr_level[i] >= 32 &&
+				   txpwr_level[i] <= 38 &&
+				   thermalvalue > rtlefuse->eeprom_thermalmeter
+				   && delta > 5) {
+				cck_index -= 1;
+			}
+
+			for (i = 0; i < rf; i++) {
+				if (ofdm_index[i] > OFDM_TABLE_SIZE - 1)
+					ofdm_index[i] = OFDM_TABLE_SIZE - 1;
+
+				else if (ofdm_index[i] < ofdm_min_index)
+					ofdm_index[i] = ofdm_min_index;
+			}
+
+			if (cck_index > CCK_TABLE_SIZE - 1)
+				cck_index = CCK_TABLE_SIZE - 1;
+			else if (cck_index < 0)
+				cck_index = 0;
+
+			if (is2t) {
+				RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+					 ("new OFDM_A_index=0x%x, "
+					  "OFDM_B_index=0x%x,"
+					  "cck_index=0x%x\n",
+					  ofdm_index[0], ofdm_index[1],
+					  cck_index));
+			} else {
+				RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+					 ("new OFDM_A_index=0x%x,"
+					  "cck_index=0x%x\n",
+					  ofdm_index[0], cck_index));
+			}
+		}
+
+		if (rtlpriv->dm.txpower_track_control && delta != 0) {
+			ele_d =
+			    (ofdmswing_table[ofdm_index[0]] & 0xFFC00000) >> 22;
+			val_x = rtlphy->reg_e94;
+			val_y = rtlphy->reg_e9c;
+
+			if (val_x != 0) {
+				if ((val_x & 0x00000200) != 0)
+					val_x = val_x | 0xFFFFFC00;
+				ele_a = ((val_x * ele_d) >> 8) & 0x000003FF;
+
+				if ((val_y & 0x00000200) != 0)
+					val_y = val_y | 0xFFFFFC00;
+				ele_c = ((val_y * ele_d) >> 8) & 0x000003FF;
+
+				value32 = (ele_d << 22) |
+				    ((ele_c & 0x3F) << 16) | ele_a;
+
+				rtl_set_bbreg(hw, ROFDM0_XATXIQIMBALANCE,
+					      MASKDWORD, value32);
+
+				value32 = (ele_c & 0x000003C0) >> 6;
+				rtl_set_bbreg(hw, ROFDM0_XCTXAFE, MASKH4BITS,
+					      value32);
+
+				value32 = ((val_x * ele_d) >> 7) & 0x01;
+				rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD,
+					      BIT(31), value32);
+
+				value32 = ((val_y * ele_d) >> 7) & 0x01;
+				rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD,
+					      BIT(29), value32);
+			} else {
+				rtl_set_bbreg(hw, ROFDM0_XATXIQIMBALANCE,
+					      MASKDWORD,
+					      ofdmswing_table[ofdm_index[0]]);
+
+				rtl_set_bbreg(hw, ROFDM0_XCTXAFE, MASKH4BITS,
+					      0x00);
+				rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD,
+					      BIT(31) | BIT(29), 0x00);
+			}
+
+			if (!rtlpriv->dm.b_cck_inch14) {
+				rtl_write_byte(rtlpriv, 0xa22,
+					       cckswing_table_ch1ch13[cck_index]
+					       [0]);
+				rtl_write_byte(rtlpriv, 0xa23,
+					       cckswing_table_ch1ch13[cck_index]
+					       [1]);
+				rtl_write_byte(rtlpriv, 0xa24,
+					       cckswing_table_ch1ch13[cck_index]
+					       [2]);
+				rtl_write_byte(rtlpriv, 0xa25,
+					       cckswing_table_ch1ch13[cck_index]
+					       [3]);
+				rtl_write_byte(rtlpriv, 0xa26,
+					       cckswing_table_ch1ch13[cck_index]
+					       [4]);
+				rtl_write_byte(rtlpriv, 0xa27,
+					       cckswing_table_ch1ch13[cck_index]
+					       [5]);
+				rtl_write_byte(rtlpriv, 0xa28,
+					       cckswing_table_ch1ch13[cck_index]
+					       [6]);
+				rtl_write_byte(rtlpriv, 0xa29,
+					       cckswing_table_ch1ch13[cck_index]
+					       [7]);
+			} else {
+				rtl_write_byte(rtlpriv, 0xa22,
+					       cckswing_table_ch14[cck_index]
+					       [0]);
+				rtl_write_byte(rtlpriv, 0xa23,
+					       cckswing_table_ch14[cck_index]
+					       [1]);
+				rtl_write_byte(rtlpriv, 0xa24,
+					       cckswing_table_ch14[cck_index]
+					       [2]);
+				rtl_write_byte(rtlpriv, 0xa25,
+					       cckswing_table_ch14[cck_index]
+					       [3]);
+				rtl_write_byte(rtlpriv, 0xa26,
+					       cckswing_table_ch14[cck_index]
+					       [4]);
+				rtl_write_byte(rtlpriv, 0xa27,
+					       cckswing_table_ch14[cck_index]
+					       [5]);
+				rtl_write_byte(rtlpriv, 0xa28,
+					       cckswing_table_ch14[cck_index]
+					       [6]);
+				rtl_write_byte(rtlpriv, 0xa29,
+					       cckswing_table_ch14[cck_index]
+					       [7]);
+			}
+
+			if (is2t) {
+				ele_d = (ofdmswing_table[ofdm_index[1]] &
+					 0xFFC00000) >> 22;
+
+				val_x = rtlphy->reg_eb4;
+				val_y = rtlphy->reg_ebc;
+
+				if (val_x != 0) {
+					if ((val_x & 0x00000200) != 0)
+						val_x = val_x | 0xFFFFFC00;
+					ele_a = ((val_x * ele_d) >> 8) &
+					    0x000003FF;
+
+					if ((val_y & 0x00000200) != 0)
+						val_y = val_y | 0xFFFFFC00;
+					ele_c = ((val_y * ele_d) >> 8) &
+					    0x00003FF;
+
+					value32 = (ele_d << 22) |
+					    ((ele_c & 0x3F) << 16) | ele_a;
+					rtl_set_bbreg(hw,
+						      ROFDM0_XBTXIQIMBALANCE,
+						      MASKDWORD, value32);
+
+					value32 = (ele_c & 0x000003C0) >> 6;
+					rtl_set_bbreg(hw, ROFDM0_XDTXAFE,
+						      MASKH4BITS, value32);
+
+					value32 = ((val_x * ele_d) >> 7) & 0x01;
+					rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD,
+						      BIT(27), value32);
+
+					value32 = ((val_y * ele_d) >> 7) & 0x01;
+					rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD,
+						      BIT(25), value32);
+				} else {
+					rtl_set_bbreg(hw,
+						      ROFDM0_XBTXIQIMBALANCE,
+						      MASKDWORD,
+						      ofdmswing_table[ofdm_index
+								      [1]]);
+					rtl_set_bbreg(hw, ROFDM0_XDTXAFE,
+						      MASKH4BITS, 0x00);
+					rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD,
+						      BIT(27) | BIT(25), 0x00);
+				}
+
+			}
+		}
+
+		if (delta_iqk > 3) {
+			rtlpriv->dm.thermalvalue_iqk = thermalvalue;
+			rtl92c_phy_iq_calibrate(hw, false);
+		}
+
+		if (rtlpriv->dm.txpower_track_control)
+			rtlpriv->dm.thermalvalue = thermalvalue;
+	}
+
+	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD, ("<===\n"));
+
+}
+
+static void rtl92c_dm_initialize_txpower_tracking_thermalmeter(
+						struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.btxpower_tracking = true;
+	rtlpriv->dm.btxpower_trackingInit = false;
+
+	RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+		 ("pMgntInfo->btxpower_tracking = %d\n",
+		  rtlpriv->dm.btxpower_tracking));
+}
+
+static void rtl92c_dm_initialize_txpower_tracking(struct ieee80211_hw *hw)
+{
+	rtl92c_dm_initialize_txpower_tracking_thermalmeter(hw);
+}
+
+static void rtl92c_dm_txpower_tracking_directcall(struct ieee80211_hw *hw)
+{
+	rtl92c_dm_txpower_tracking_callback_thermalmeter(hw);
+}
+
+static void rtl92c_dm_check_txpower_tracking_thermal_meter(
+						struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	static u8 tm_trigger;
+
+	if (!rtlpriv->dm.btxpower_tracking)
+		return;
+
+	if (!tm_trigger) {
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_T_METER, RFREG_OFFSET_MASK,
+			      0x60);
+		RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+			 ("Trigger 92S Thermal Meter!!\n"));
+		tm_trigger = 1;
+		return;
+	} else {
+		RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD,
+			 ("Schedule TxPowerTracking direct call!!\n"));
+		rtl92c_dm_txpower_tracking_directcall(hw);
+		tm_trigger = 0;
+	}
+}
+
+void rtl92c_dm_check_txpower_tracking(struct ieee80211_hw *hw)
+{
+	rtl92c_dm_check_txpower_tracking_thermal_meter(hw);
+}
+
+void rtl92c_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rate_adaptive *p_ra = &(rtlpriv->ra);
+
+	p_ra->ratr_state = DM_RATR_STA_INIT;
+	p_ra->pre_ratr_state = DM_RATR_STA_INIT;
+
+	if (rtlpriv->dm.dm_type == DM_TYPE_BYDRIVER)
+		rtlpriv->dm.b_useramask = true;
+	else
+		rtlpriv->dm.b_useramask = false;
+
+}
+
+static void rtl92c_dm_refresh_rate_adaptive_mask(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rate_adaptive *p_ra = &(rtlpriv->ra);
+	u32 low_rssithresh_for_ra, high_rssithresh_for_ra;
+
+	if (is_hal_stop(rtlhal)) {
+		RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+			 ("<---- driver is going to unload\n"));
+		return;
+	}
+
+	if (!rtlpriv->dm.b_useramask) {
+		RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+			("<---- driver does not control rate adaptive mask\n"));
+		return;
+	}
+
+	if (mac->link_state == MAC80211_LINKED) {
+
+		switch (p_ra->pre_ratr_state) {
+		case DM_RATR_STA_HIGH:
+			high_rssithresh_for_ra = 50;
+			low_rssithresh_for_ra = 20;
+			break;
+		case DM_RATR_STA_MIDDLE:
+			high_rssithresh_for_ra = 55;
+			low_rssithresh_for_ra = 20;
+			break;
+		case DM_RATR_STA_LOW:
+			high_rssithresh_for_ra = 50;
+			low_rssithresh_for_ra = 25;
+			break;
+		default:
+			high_rssithresh_for_ra = 50;
+			low_rssithresh_for_ra = 20;
+			break;
+		}
+
+		if (rtlpriv->dm.undecorated_smoothed_pwdb >
+		    (long)high_rssithresh_for_ra)
+			p_ra->ratr_state = DM_RATR_STA_HIGH;
+		else if (rtlpriv->dm.undecorated_smoothed_pwdb >
+			 (long)low_rssithresh_for_ra)
+			p_ra->ratr_state = DM_RATR_STA_MIDDLE;
+		else
+			p_ra->ratr_state = DM_RATR_STA_LOW;
+
+		if (p_ra->pre_ratr_state != p_ra->ratr_state) {
+			RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+				 ("RSSI = %ld\n",
+				  rtlpriv->dm.undecorated_smoothed_pwdb));
+			RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+				 ("RSSI_LEVEL = %d\n", p_ra->ratr_state));
+			RT_TRACE(rtlpriv, COMP_RATE, DBG_LOUD,
+				 ("PreState = %d, CurState = %d\n",
+				  p_ra->pre_ratr_state, p_ra->ratr_state));
+
+			rtlpriv->cfg->ops->update_rate_mask(hw,
+					p_ra->ratr_state);
+
+			p_ra->pre_ratr_state = p_ra->ratr_state;
+		}
+	}
+}
+
+static void rtl92c_dm_init_dynamic_bb_powersaving(struct ieee80211_hw *hw)
+{
+	dm_pstable.pre_ccastate = CCA_MAX;
+	dm_pstable.cur_ccasate = CCA_MAX;
+	dm_pstable.pre_rfstate = RF_MAX;
+	dm_pstable.cur_rfstate = RF_MAX;
+	dm_pstable.rssi_val_min = 0;
+}
+
+static void rtl92c_dm_1r_cca(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	if (dm_pstable.rssi_val_min != 0) {
+		if (dm_pstable.pre_ccastate == CCA_2R) {
+			if (dm_pstable.rssi_val_min >= 35)
+				dm_pstable.cur_ccasate = CCA_1R;
+			else
+				dm_pstable.cur_ccasate = CCA_2R;
+		} else {
+			if (dm_pstable.rssi_val_min <= 30)
+				dm_pstable.cur_ccasate = CCA_2R;
+			else
+				dm_pstable.cur_ccasate = CCA_1R;
+		}
+	} else {
+		dm_pstable.cur_ccasate = CCA_MAX;
+	}
+
+	if (dm_pstable.pre_ccastate != dm_pstable.cur_ccasate) {
+		if (dm_pstable.cur_ccasate == CCA_1R) {
+			if (get_rf_type(rtlphy) == RF_2T2R) {
+				rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+					      MASKBYTE0, 0x13);
+				rtl_set_bbreg(hw, 0xe70, MASKBYTE3, 0x20);
+			} else {
+				rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE,
+					      MASKBYTE0, 0x23);
+				rtl_set_bbreg(hw, 0xe70, 0x7fc00000, 0x10c);
+			}
+		} else {
+			rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0,
+				      0x33);
+			rtl_set_bbreg(hw, 0xe70, MASKBYTE3, 0x63);
+		}
+		dm_pstable.pre_ccastate = dm_pstable.cur_ccasate;
+	}
+
+	RT_TRACE(rtlpriv, DBG_LOUD, DBG_LOUD, ("CCAStage = %s\n",
+					       (dm_pstable.cur_ccasate ==
+						0) ? "1RCCA" : "2RCCA"));
+}
+
+void rtl92c_dm_rf_saving(struct ieee80211_hw *hw, u8 bforce_in_normal)
+{
+	static u8 initialize;
+	static u32 reg_874, reg_c70, reg_85c, reg_a74;
+
+	if (initialize == 0) {
+		reg_874 = (rtl_get_bbreg(hw, RFPGA0_XCD_RFINTERFACESW,
+					 MASKDWORD) & 0x1CC000) >> 14;
+
+		reg_c70 = (rtl_get_bbreg(hw, ROFDM0_AGCPARAMETER1,
+					 MASKDWORD) & BIT(3)) >> 3;
+
+		reg_85c = (rtl_get_bbreg(hw, RFPGA0_XCD_SWITCHCONTROL,
+					 MASKDWORD) & 0xFF000000) >> 24;
+
+		reg_a74 = (rtl_get_bbreg(hw, 0xa74, MASKDWORD) & 0xF000) >> 12;
+
+		initialize = 1;
+	}
+
+	if (!bforce_in_normal) {
+		if (dm_pstable.rssi_val_min != 0) {
+			if (dm_pstable.pre_rfstate == RF_NORMAL) {
+				if (dm_pstable.rssi_val_min >= 30)
+					dm_pstable.cur_rfstate = RF_SAVE;
+				else
+					dm_pstable.cur_rfstate = RF_NORMAL;
+			} else {
+				if (dm_pstable.rssi_val_min <= 25)
+					dm_pstable.cur_rfstate = RF_NORMAL;
+				else
+					dm_pstable.cur_rfstate = RF_SAVE;
+			}
+		} else {
+			dm_pstable.cur_rfstate = RF_MAX;
+		}
+	} else {
+		dm_pstable.cur_rfstate = RF_NORMAL;
+	}
+
+	if (dm_pstable.pre_rfstate != dm_pstable.cur_rfstate) {
+		if (dm_pstable.cur_rfstate == RF_SAVE) {
+			rtl_set_bbreg(hw, RFPGA0_XCD_RFINTERFACESW,
+				      0x1C0000, 0x2);
+			rtl_set_bbreg(hw, ROFDM0_AGCPARAMETER1, BIT(3), 0);
+			rtl_set_bbreg(hw, RFPGA0_XCD_SWITCHCONTROL,
+				      0xFF000000, 0x63);
+			rtl_set_bbreg(hw, RFPGA0_XCD_RFINTERFACESW,
+				      0xC000, 0x2);
+			rtl_set_bbreg(hw, 0xa74, 0xF000, 0x3);
+			rtl_set_bbreg(hw, 0x818, BIT(28), 0x0);
+			rtl_set_bbreg(hw, 0x818, BIT(28), 0x1);
+		} else {
+			rtl_set_bbreg(hw, RFPGA0_XCD_RFINTERFACESW,
+				      0x1CC000, reg_874);
+			rtl_set_bbreg(hw, ROFDM0_AGCPARAMETER1, BIT(3),
+				      reg_c70);
+			rtl_set_bbreg(hw, RFPGA0_XCD_SWITCHCONTROL, 0xFF000000,
+				      reg_85c);
+			rtl_set_bbreg(hw, 0xa74, 0xF000, reg_a74);
+			rtl_set_bbreg(hw, 0x818, BIT(28), 0x0);
+		}
+
+		dm_pstable.pre_rfstate = dm_pstable.cur_rfstate;
+	}
+}
+
+static void rtl92c_dm_dynamic_bb_powersaving(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (((mac->link_state == MAC80211_NOLINK)) &&
+	    (rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb == 0)) {
+		dm_pstable.rssi_val_min = 0;
+		RT_TRACE(rtlpriv, DBG_LOUD, DBG_LOUD,
+			 ("Not connected to any\n"));
+	}
+
+	if (mac->link_state == MAC80211_LINKED) {
+		if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+			dm_pstable.rssi_val_min =
+			    rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+			RT_TRACE(rtlpriv, DBG_LOUD, DBG_LOUD,
+				 ("AP Client PWDB = 0x%lx\n",
+				  dm_pstable.rssi_val_min));
+		} else {
+			dm_pstable.rssi_val_min =
+			    rtlpriv->dm.undecorated_smoothed_pwdb;
+			RT_TRACE(rtlpriv, DBG_LOUD, DBG_LOUD,
+				 ("STA Default Port PWDB = 0x%lx\n",
+				  dm_pstable.rssi_val_min));
+		}
+	} else {
+		dm_pstable.rssi_val_min =
+		    rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
+
+		RT_TRACE(rtlpriv, DBG_LOUD, DBG_LOUD,
+			 ("AP Ext Port PWDB = 0x%lx\n",
+			  dm_pstable.rssi_val_min));
+	}
+
+	if (IS_92C_SERIAL(rtlhal->version))
+		rtl92c_dm_1r_cca(hw);
+}
+
+void rtl92c_dm_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpriv->dm.dm_type = DM_TYPE_BYDRIVER;
+	rtl92c_dm_diginit(hw);
+	rtl92c_dm_init_dynamic_txpower(hw);
+	rtl92c_dm_init_edca_turbo(hw);
+	rtl92c_dm_init_rate_adaptive_mask(hw);
+	rtl92c_dm_initialize_txpower_tracking(hw);
+	rtl92c_dm_init_dynamic_bb_powersaving(hw);
+}
+
+void rtl92c_dm_watchdog(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	bool b_fw_current_inpsmode = false;
+	bool b_fw_ps_awake = true;
+
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_FW_PSMODE_STATUS,
+				      (u8 *) (&b_fw_current_inpsmode));
+	rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_FWLPS_RF_ON,
+				      (u8 *) (&b_fw_ps_awake));
+
+	if ((ppsc->rfpwr_state == ERFON) && ((!b_fw_current_inpsmode) &&
+					     b_fw_ps_awake)
+	    && (!ppsc->rfchange_inprogress)) {
+		rtl92c_dm_pwdb_monitor(hw);
+		rtl92c_dm_dig(hw);
+		rtl92c_dm_false_alarm_counter_statistics(hw);
+		rtl92c_dm_dynamic_bb_powersaving(hw);
+		rtl92c_dm_dynamic_txpower(hw);
+		rtl92c_dm_check_txpower_tracking(hw);
+		rtl92c_dm_refresh_rate_adaptive_mask(hw);
+		rtl92c_dm_check_edca_turbo(hw);
+	}
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/dm.h b/drivers/net/wireless/rtlwifi/rtl8192ce/dm.h
new file mode 100644
index 00000000000..463439e4074
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/dm.h
@@ -0,0 +1,196 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef	__RTL92C_DM_H__
+#define __RTL92C_DM_H__
+
+#define HAL_DM_DIG_DISABLE			BIT(0)
+#define HAL_DM_HIPWR_DISABLE			BIT(1)
+
+#define OFDM_TABLE_LENGTH			37
+#define CCK_TABLE_LENGTH			33
+
+#define OFDM_TABLE_SIZE				37
+#define CCK_TABLE_SIZE				33
+
+#define BW_AUTO_SWITCH_HIGH_LOW			25
+#define BW_AUTO_SWITCH_LOW_HIGH			30
+
+#define DM_DIG_THRESH_HIGH			40
+#define DM_DIG_THRESH_LOW			35
+
+#define DM_FALSEALARM_THRESH_LOW		400
+#define DM_FALSEALARM_THRESH_HIGH		1000
+
+#define DM_DIG_MAX				0x3e
+#define DM_DIG_MIN				0x1e
+
+#define DM_DIG_FA_UPPER				0x32
+#define DM_DIG_FA_LOWER				0x20
+#define DM_DIG_FA_TH0				0x20
+#define DM_DIG_FA_TH1				0x100
+#define DM_DIG_FA_TH2				0x200
+
+#define DM_DIG_BACKOFF_MAX			12
+#define DM_DIG_BACKOFF_MIN			-4
+#define DM_DIG_BACKOFF_DEFAULT			10
+
+#define RXPATHSELECTION_SS_TH_lOW		30
+#define RXPATHSELECTION_DIFF_TH			18
+
+#define DM_RATR_STA_INIT			0
+#define DM_RATR_STA_HIGH			1
+#define DM_RATR_STA_MIDDLE			2
+#define DM_RATR_STA_LOW				3
+
+#define CTS2SELF_THVAL				30
+#define REGC38_TH				20
+
+#define WAIOTTHVal				25
+
+#define TXHIGHPWRLEVEL_NORMAL			0
+#define TXHIGHPWRLEVEL_LEVEL1			1
+#define TXHIGHPWRLEVEL_LEVEL2			2
+#define TXHIGHPWRLEVEL_BT1			3
+#define TXHIGHPWRLEVEL_BT2			4
+
+#define DM_TYPE_BYFW				0
+#define DM_TYPE_BYDRIVER			1
+
+#define TX_POWER_NEAR_FIELD_THRESH_LVL2		74
+#define TX_POWER_NEAR_FIELD_THRESH_LVL1		67
+
+struct ps_t {
+	u8 pre_ccastate;
+	u8 cur_ccasate;
+	u8 pre_rfstate;
+	u8 cur_rfstate;
+	long rssi_val_min;
+};
+
+struct dig_t {
+	u8 dig_enable_flag;
+	u8 dig_ext_port_stage;
+	u32 rssi_lowthresh;
+	u32 rssi_highthresh;
+	u32 fa_lowthresh;
+	u32 fa_highthresh;
+	u8 cursta_connectctate;
+	u8 presta_connectstate;
+	u8 curmultista_connectstate;
+	u8 pre_igvalue;
+	u8 cur_igvalue;
+	char backoff_val;
+	char backoff_val_range_max;
+	char backoff_val_range_min;
+	u8 rx_gain_range_max;
+	u8 rx_gain_range_min;
+	u8 rssi_val_min;
+	u8 pre_cck_pd_state;
+	u8 cur_cck_pd_state;
+	u8 pre_cck_fa_state;
+	u8 cur_cck_fa_state;
+	u8 pre_ccastate;
+	u8 cur_ccasate;
+};
+
+struct swat_t {
+	u8 failure_cnt;
+	u8 try_flag;
+	u8 stop_trying;
+	long pre_rssi;
+	long trying_threshold;
+	u8 cur_antenna;
+	u8 pre_antenna;
+};
+
+enum tag_dynamic_init_gain_operation_type_definition {
+	DIG_TYPE_THRESH_HIGH = 0,
+	DIG_TYPE_THRESH_LOW = 1,
+	DIG_TYPE_BACKOFF = 2,
+	DIG_TYPE_RX_GAIN_MIN = 3,
+	DIG_TYPE_RX_GAIN_MAX = 4,
+	DIG_TYPE_ENABLE = 5,
+	DIG_TYPE_DISABLE = 6,
+	DIG_OP_TYPE_MAX
+};
+
+enum tag_cck_packet_detection_threshold_type_definition {
+	CCK_PD_STAGE_LowRssi = 0,
+	CCK_PD_STAGE_HighRssi = 1,
+	CCK_FA_STAGE_Low = 2,
+	CCK_FA_STAGE_High = 3,
+	CCK_PD_STAGE_MAX = 4,
+};
+
+enum dm_1r_cca_e {
+	CCA_1R = 0,
+	CCA_2R = 1,
+	CCA_MAX = 2,
+};
+
+enum dm_rf_e {
+	RF_SAVE = 0,
+	RF_NORMAL = 1,
+	RF_MAX = 2,
+};
+
+enum dm_sw_ant_switch_e {
+	ANS_ANTENNA_B = 1,
+	ANS_ANTENNA_A = 2,
+	ANS_ANTENNA_MAX = 3,
+};
+
+enum dm_dig_ext_port_alg_e {
+	DIG_EXT_PORT_STAGE_0 = 0,
+	DIG_EXT_PORT_STAGE_1 = 1,
+	DIG_EXT_PORT_STAGE_2 = 2,
+	DIG_EXT_PORT_STAGE_3 = 3,
+	DIG_EXT_PORT_STAGE_MAX = 4,
+};
+
+enum dm_dig_connect_e {
+	DIG_STA_DISCONNECT = 0,
+	DIG_STA_CONNECT = 1,
+	DIG_STA_BEFORE_CONNECT = 2,
+	DIG_MULTISTA_DISCONNECT = 3,
+	DIG_MULTISTA_CONNECT = 4,
+	DIG_CONNECT_MAX
+};
+
+extern struct dig_t dm_digtable;
+void rtl92c_dm_init(struct ieee80211_hw *hw);
+void rtl92c_dm_watchdog(struct ieee80211_hw *hw);
+void rtl92c_dm_write_dig(struct ieee80211_hw *hw);
+void rtl92c_dm_init_edca_turbo(struct ieee80211_hw *hw);
+void rtl92c_dm_check_txpower_tracking(struct ieee80211_hw *hw);
+void rtl92c_dm_init_rate_adaptive_mask(struct ieee80211_hw *hw);
+void rtl92c_dm_rf_saving(struct ieee80211_hw *hw, u8 bforce_in_normal);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/fw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/fw.c
new file mode 100644
index 00000000000..11dd22b987e
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/fw.c
@@ -0,0 +1,804 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include <linux/firmware.h>
+#include "../wifi.h"
+#include "../pci.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "fw.h"
+#include "table.h"
+
+static void _rtl92c_enable_fw_download(struct ieee80211_hw *hw, bool enable)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192CU) {
+		u32 value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
+		if (enable)
+			value32 |= MCUFWDL_EN;
+		else
+			value32 &= ~MCUFWDL_EN;
+		rtl_write_dword(rtlpriv, REG_MCUFWDL, value32);
+	} else if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192CE) {
+		u8 tmp;
+		if (enable) {
+
+			tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+			rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1,
+				       tmp | 0x04);
+
+			tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL);
+			rtl_write_byte(rtlpriv, REG_MCUFWDL, tmp | 0x01);
+
+			tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL + 2);
+			rtl_write_byte(rtlpriv, REG_MCUFWDL + 2, tmp & 0xf7);
+		} else {
+
+			tmp = rtl_read_byte(rtlpriv, REG_MCUFWDL);
+			rtl_write_byte(rtlpriv, REG_MCUFWDL, tmp & 0xfe);
+
+			rtl_write_byte(rtlpriv, REG_MCUFWDL + 1, 0x00);
+		}
+	}
+}
+
+static void _rtl92c_fw_block_write(struct ieee80211_hw *hw,
+				   const u8 *buffer, u32 size)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 blockSize = sizeof(u32);
+	u8 *bufferPtr = (u8 *) buffer;
+	u32 *pu4BytePtr = (u32 *) buffer;
+	u32 i, offset, blockCount, remainSize;
+
+	blockCount = size / blockSize;
+	remainSize = size % blockSize;
+
+	for (i = 0; i < blockCount; i++) {
+		offset = i * blockSize;
+		rtl_write_dword(rtlpriv, (FW_8192C_START_ADDRESS + offset),
+				*(pu4BytePtr + i));
+	}
+
+	if (remainSize) {
+		offset = blockCount * blockSize;
+		bufferPtr += offset;
+		for (i = 0; i < remainSize; i++) {
+			rtl_write_byte(rtlpriv, (FW_8192C_START_ADDRESS +
+						 offset + i), *(bufferPtr + i));
+		}
+	}
+}
+
+static void _rtl92c_fw_page_write(struct ieee80211_hw *hw,
+				  u32 page, const u8 *buffer, u32 size)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 value8;
+	u8 u8page = (u8) (page & 0x07);
+
+	value8 = (rtl_read_byte(rtlpriv, REG_MCUFWDL + 2) & 0xF8) | u8page;
+
+	rtl_write_byte(rtlpriv, (REG_MCUFWDL + 2), value8);
+	_rtl92c_fw_block_write(hw, buffer, size);
+}
+
+static void _rtl92c_fill_dummy(u8 *pfwbuf, u32 *pfwlen)
+{
+	u32 fwlen = *pfwlen;
+	u8 remain = (u8) (fwlen % 4);
+
+	remain = (remain == 0) ? 0 : (4 - remain);
+
+	while (remain > 0) {
+		pfwbuf[fwlen] = 0;
+		fwlen++;
+		remain--;
+	}
+
+	*pfwlen = fwlen;
+}
+
+static void _rtl92c_write_fw(struct ieee80211_hw *hw,
+			     enum version_8192c version, u8 *buffer, u32 size)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	bool is_version_b;
+	u8 *bufferPtr = (u8 *) buffer;
+
+	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, ("FW size is %d bytes,\n", size));
+
+	is_version_b = IS_CHIP_VER_B(version);
+	if (is_version_b) {
+		u32 pageNums, remainSize;
+		u32 page, offset;
+
+		if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192CE)
+			_rtl92c_fill_dummy(bufferPtr, &size);
+
+		pageNums = size / FW_8192C_PAGE_SIZE;
+		remainSize = size % FW_8192C_PAGE_SIZE;
+
+		if (pageNums > 4) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("Page numbers should not greater then 4\n"));
+		}
+
+		for (page = 0; page < pageNums; page++) {
+			offset = page * FW_8192C_PAGE_SIZE;
+			_rtl92c_fw_page_write(hw, page, (bufferPtr + offset),
+					      FW_8192C_PAGE_SIZE);
+		}
+
+		if (remainSize) {
+			offset = pageNums * FW_8192C_PAGE_SIZE;
+			page = pageNums;
+			_rtl92c_fw_page_write(hw, page, (bufferPtr + offset),
+					      remainSize);
+		}
+	} else {
+		_rtl92c_fw_block_write(hw, buffer, size);
+	}
+}
+
+static int _rtl92c_fw_free_to_go(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	int err = -EIO;
+	u32 counter = 0;
+	u32 value32;
+
+	do {
+		value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
+	} while ((counter++ < FW_8192C_POLLING_TIMEOUT_COUNT) &&
+		 (!(value32 & FWDL_ChkSum_rpt)));
+
+	if (counter >= FW_8192C_POLLING_TIMEOUT_COUNT) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("chksum report faill ! REG_MCUFWDL:0x%08x .\n",
+			  value32));
+		goto exit;
+	}
+
+	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
+		 ("Checksum report OK ! REG_MCUFWDL:0x%08x .\n", value32));
+
+	value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
+	value32 |= MCUFWDL_RDY;
+	value32 &= ~WINTINI_RDY;
+	rtl_write_dword(rtlpriv, REG_MCUFWDL, value32);
+
+	counter = 0;
+
+	do {
+		value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
+		if (value32 & WINTINI_RDY) {
+			RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
+				 ("Polling FW ready success!!"
+				 " REG_MCUFWDL:0x%08x .\n",
+				 value32));
+			err = 0;
+			goto exit;
+		}
+
+		mdelay(FW_8192C_POLLING_DELAY);
+
+	} while (counter++ < FW_8192C_POLLING_TIMEOUT_COUNT);
+
+	RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+		 ("Polling FW ready fail!! REG_MCUFWDL:0x%08x .\n", value32));
+
+exit:
+	return err;
+}
+
+int rtl92c_download_fw(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl92c_firmware_header *pfwheader;
+	u8 *pfwdata;
+	u32 fwsize;
+	int err;
+	enum version_8192c version = rtlhal->version;
+
+	const struct firmware *firmware = NULL;
+
+	err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
+			       rtlpriv->io.dev);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Failed to request firmware!\n"));
+		return 1;
+	}
+
+	if (firmware->size > 0x4000) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Firmware is too big!\n"));
+		release_firmware(firmware);
+		return 1;
+	}
+
+	memcpy(rtlhal->pfirmware, firmware->data, firmware->size);
+	fwsize = firmware->size;
+	release_firmware(firmware);
+
+	pfwheader = (struct rtl92c_firmware_header *)rtlhal->pfirmware;
+	pfwdata = (u8 *) rtlhal->pfirmware;
+
+	if (IS_FW_HEADER_EXIST(pfwheader)) {
+		RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG,
+			 ("Firmware Version(%d), Signature(%#x),Size(%d)\n",
+			  pfwheader->version, pfwheader->signature,
+			  (uint)sizeof(struct rtl92c_firmware_header)));
+
+		pfwdata = pfwdata + sizeof(struct rtl92c_firmware_header);
+		fwsize = fwsize - sizeof(struct rtl92c_firmware_header);
+	}
+
+	_rtl92c_enable_fw_download(hw, true);
+	_rtl92c_write_fw(hw, version, pfwdata, fwsize);
+	_rtl92c_enable_fw_download(hw, false);
+
+	err = _rtl92c_fw_free_to_go(hw);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Firmware is not ready to run!\n"));
+	} else {
+		RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
+			 ("Firmware is ready to run!\n"));
+	}
+
+	return 0;
+}
+
+static bool _rtl92c_check_fw_read_last_h2c(struct ieee80211_hw *hw, u8 boxnum)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 val_hmetfr, val_mcutst_1;
+	bool result = false;
+
+	val_hmetfr = rtl_read_byte(rtlpriv, REG_HMETFR);
+	val_mcutst_1 = rtl_read_byte(rtlpriv, (REG_MCUTST_1 + boxnum));
+
+	if (((val_hmetfr >> boxnum) & BIT(0)) == 0 && val_mcutst_1 == 0)
+		result = true;
+	return result;
+}
+
+static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw,
+			      u8 element_id, u32 cmd_len, u8 *p_cmdbuffer)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 boxnum;
+	u16 box_reg, box_extreg;
+	u8 u1b_tmp;
+	bool isfw_read = false;
+	u8 buf_index;
+	bool bwrite_sucess = false;
+	u8 wait_h2c_limmit = 100;
+	u8 wait_writeh2c_limmit = 100;
+	u8 boxcontent[4], boxextcontent[2];
+	u32 h2c_waitcounter = 0;
+	unsigned long flag;
+	u8 idx;
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, ("come in\n"));
+
+	while (true) {
+		spin_lock_irqsave(&rtlpriv->locks.h2c_lock, flag);
+		if (rtlhal->b_h2c_setinprogress) {
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("H2C set in progress! Wait to set.."
+				  "element_id(%d).\n", element_id));
+
+			while (rtlhal->b_h2c_setinprogress) {
+				spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock,
+						       flag);
+				h2c_waitcounter++;
+				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+					 ("Wait 100 us (%d times)...\n",
+					  h2c_waitcounter));
+				udelay(100);
+
+				if (h2c_waitcounter > 1000)
+					return;
+				spin_lock_irqsave(&rtlpriv->locks.h2c_lock,
+						  flag);
+			}
+			spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
+		} else {
+			rtlhal->b_h2c_setinprogress = true;
+			spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
+			break;
+		}
+	}
+
+	while (!bwrite_sucess) {
+		wait_writeh2c_limmit--;
+		if (wait_writeh2c_limmit == 0) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("Write H2C fail because no trigger "
+				  "for FW INT!\n"));
+			break;
+		}
+
+		boxnum = rtlhal->last_hmeboxnum;
+		switch (boxnum) {
+		case 0:
+			box_reg = REG_HMEBOX_0;
+			box_extreg = REG_HMEBOX_EXT_0;
+			break;
+		case 1:
+			box_reg = REG_HMEBOX_1;
+			box_extreg = REG_HMEBOX_EXT_1;
+			break;
+		case 2:
+			box_reg = REG_HMEBOX_2;
+			box_extreg = REG_HMEBOX_EXT_2;
+			break;
+		case 3:
+			box_reg = REG_HMEBOX_3;
+			box_extreg = REG_HMEBOX_EXT_3;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("switch case not process\n"));
+			break;
+		}
+
+		isfw_read = _rtl92c_check_fw_read_last_h2c(hw, boxnum);
+		while (!isfw_read) {
+
+			wait_h2c_limmit--;
+			if (wait_h2c_limmit == 0) {
+				RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+					 ("Wating too long for FW read "
+					  "clear HMEBox(%d)!\n", boxnum));
+				break;
+			}
+
+			udelay(10);
+
+			isfw_read = _rtl92c_check_fw_read_last_h2c(hw, boxnum);
+			u1b_tmp = rtl_read_byte(rtlpriv, 0x1BF);
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("Wating for FW read clear HMEBox(%d)!!! "
+				  "0x1BF = %2x\n", boxnum, u1b_tmp));
+		}
+
+		if (!isfw_read) {
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+				 ("Write H2C register BOX[%d] fail!!!!! "
+				  "Fw do not read.\n", boxnum));
+			break;
+		}
+
+		memset(boxcontent, 0, sizeof(boxcontent));
+		memset(boxextcontent, 0, sizeof(boxextcontent));
+		boxcontent[0] = element_id;
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+			 ("Write element_id box_reg(%4x) = %2x\n",
+			  box_reg, element_id));
+
+		switch (cmd_len) {
+		case 1:
+			boxcontent[0] &= ~(BIT(7));
+			memcpy((u8 *) (boxcontent) + 1,
+			       p_cmdbuffer + buf_index, 1);
+
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_reg + idx,
+					       boxcontent[idx]);
+			}
+			break;
+		case 2:
+			boxcontent[0] &= ~(BIT(7));
+			memcpy((u8 *) (boxcontent) + 1,
+			       p_cmdbuffer + buf_index, 2);
+
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_reg + idx,
+					       boxcontent[idx]);
+			}
+			break;
+		case 3:
+			boxcontent[0] &= ~(BIT(7));
+			memcpy((u8 *) (boxcontent) + 1,
+			       p_cmdbuffer + buf_index, 3);
+
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_reg + idx,
+					       boxcontent[idx]);
+			}
+			break;
+		case 4:
+			boxcontent[0] |= (BIT(7));
+			memcpy((u8 *) (boxextcontent),
+			       p_cmdbuffer + buf_index, 2);
+			memcpy((u8 *) (boxcontent) + 1,
+			       p_cmdbuffer + buf_index + 2, 2);
+
+			for (idx = 0; idx < 2; idx++) {
+				rtl_write_byte(rtlpriv, box_extreg + idx,
+					       boxextcontent[idx]);
+			}
+
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_reg + idx,
+					       boxcontent[idx]);
+			}
+			break;
+		case 5:
+			boxcontent[0] |= (BIT(7));
+			memcpy((u8 *) (boxextcontent),
+			       p_cmdbuffer + buf_index, 2);
+			memcpy((u8 *) (boxcontent) + 1,
+			       p_cmdbuffer + buf_index + 2, 3);
+
+			for (idx = 0; idx < 2; idx++) {
+				rtl_write_byte(rtlpriv, box_extreg + idx,
+					       boxextcontent[idx]);
+			}
+
+			for (idx = 0; idx < 4; idx++) {
+				rtl_write_byte(rtlpriv, box_reg + idx,
+					       boxcontent[idx]);
+			}
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("switch case not process\n"));
+			break;
+		}
+
+		bwrite_sucess = true;
+
+		rtlhal->last_hmeboxnum = boxnum + 1;
+		if (rtlhal->last_hmeboxnum == 4)
+			rtlhal->last_hmeboxnum = 0;
+
+		RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+			 ("pHalData->last_hmeboxnum  = %d\n",
+			  rtlhal->last_hmeboxnum));
+	}
+
+	spin_lock_irqsave(&rtlpriv->locks.h2c_lock, flag);
+	rtlhal->b_h2c_setinprogress = false;
+	spin_unlock_irqrestore(&rtlpriv->locks.h2c_lock, flag);
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD, ("go out\n"));
+}
+
+void rtl92c_fill_h2c_cmd(struct ieee80211_hw *hw,
+			 u8 element_id, u32 cmd_len, u8 *p_cmdbuffer)
+{
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u32 tmp_cmdbuf[2];
+
+	if (rtlhal->bfw_ready == false) {
+		RT_ASSERT(false, ("return H2C cmd because of Fw "
+				  "download fail!!!\n"));
+		return;
+	}
+
+	memset(tmp_cmdbuf, 0, 8);
+	memcpy(tmp_cmdbuf, p_cmdbuffer, cmd_len);
+	_rtl92c_fill_h2c_command(hw, element_id, cmd_len, (u8 *)&tmp_cmdbuf);
+
+	return;
+}
+
+void rtl92c_firmware_selfreset(struct ieee80211_hw *hw)
+{
+	u8 u1b_tmp;
+	u8 delay = 100;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtl_write_byte(rtlpriv, REG_HMETFR + 3, 0x20);
+	u1b_tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+
+	while (u1b_tmp & BIT(2)) {
+		delay--;
+		if (delay == 0) {
+			RT_ASSERT(false, ("8051 reset fail.\n"));
+			break;
+		}
+		udelay(50);
+		u1b_tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
+	}
+}
+
+void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 u1_h2c_set_pwrmode[3] = {0};
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, ("FW LPS mode = %d\n", mode));
+
+	SET_H2CCMD_PWRMODE_PARM_MODE(u1_h2c_set_pwrmode, mode);
+	SET_H2CCMD_PWRMODE_PARM_SMART_PS(u1_h2c_set_pwrmode, 1);
+	SET_H2CCMD_PWRMODE_PARM_BCN_PASS_TIME(u1_h2c_set_pwrmode,
+					      ppsc->reg_max_lps_awakeintvl);
+
+	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG,
+		      "rtl92c_set_fw_rsvdpagepkt(): u1_h2c_set_pwrmode\n",
+		      u1_h2c_set_pwrmode, 3);
+	rtl92c_fill_h2c_cmd(hw, H2C_SETPWRMODE, 3, u1_h2c_set_pwrmode);
+
+}
+
+static bool _rtl92c_cmd_send_packet(struct ieee80211_hw *hw,
+				    struct sk_buff *skb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl8192_tx_ring *ring;
+	struct rtl_tx_desc *pdesc;
+	u8 own;
+	unsigned long flags;
+	struct sk_buff *pskb = NULL;
+
+	ring = &rtlpci->tx_ring[BEACON_QUEUE];
+
+	pskb = __skb_dequeue(&ring->queue);
+	if (pskb)
+		kfree_skb(pskb);
+
+	spin_lock_irqsave(&rtlpriv->locks.irq_th_lock, flags);
+
+	pdesc = &ring->desc[0];
+	own = (u8) rtlpriv->cfg->ops->get_desc((u8 *) pdesc, true, HW_DESC_OWN);
+
+	rtlpriv->cfg->ops->fill_tx_cmddesc(hw, (u8 *) pdesc, 1, 1, skb);
+
+	__skb_queue_tail(&ring->queue, skb);
+
+	spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags);
+
+	rtlpriv->cfg->ops->tx_polling(hw, BEACON_QUEUE);
+
+	return true;
+}
+
+#define BEACON_PG		0 /*->1*/
+#define PSPOLL_PG		2
+#define NULL_PG			3
+#define PROBERSP_PG		4 /*->5*/
+
+#define TOTAL_RESERVED_PKT_LEN	768
+
+static u8 reserved_page_packet[TOTAL_RESERVED_PKT_LEN] = {
+	/* page 0 beacon */
+	0x80, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
+	0xFF, 0xFF, 0x00, 0xE0, 0x4C, 0x76, 0x00, 0x42,
+	0x00, 0x40, 0x10, 0x10, 0x00, 0x03, 0x50, 0x08,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x64, 0x00, 0x00, 0x04, 0x00, 0x0C, 0x6C, 0x69,
+	0x6E, 0x6B, 0x73, 0x79, 0x73, 0x5F, 0x77, 0x6C,
+	0x61, 0x6E, 0x01, 0x04, 0x82, 0x84, 0x8B, 0x96,
+	0x03, 0x01, 0x01, 0x06, 0x02, 0x00, 0x00, 0x2A,
+	0x01, 0x00, 0x32, 0x08, 0x24, 0x30, 0x48, 0x6C,
+	0x0C, 0x12, 0x18, 0x60, 0x2D, 0x1A, 0x6C, 0x18,
+	0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x3D, 0x00, 0xDD, 0x06, 0x00, 0xE0, 0x4C, 0x02,
+	0x01, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 1 beacon */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x10, 0x00, 0x20, 0x8C, 0x00, 0x12, 0x10, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 2  ps-poll */
+	0xA4, 0x10, 0x01, 0xC0, 0x00, 0x40, 0x10, 0x10,
+	0x00, 0x03, 0x00, 0xE0, 0x4C, 0x76, 0x00, 0x42,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x18, 0x00, 0x20, 0x8C, 0x00, 0x12, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+	0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 3  null */
+	0x48, 0x01, 0x00, 0x00, 0x00, 0x40, 0x10, 0x10,
+	0x00, 0x03, 0x00, 0xE0, 0x4C, 0x76, 0x00, 0x42,
+	0x00, 0x40, 0x10, 0x10, 0x00, 0x03, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x72, 0x00, 0x20, 0x8C, 0x00, 0x12, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
+	0x80, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 4  probe_resp */
+	0x50, 0x00, 0x00, 0x00, 0x00, 0x40, 0x10, 0x10,
+	0x00, 0x03, 0x00, 0xE0, 0x4C, 0x76, 0x00, 0x42,
+	0x00, 0x40, 0x10, 0x10, 0x00, 0x03, 0x00, 0x00,
+	0x9E, 0x46, 0x15, 0x32, 0x27, 0xF2, 0x2D, 0x00,
+	0x64, 0x00, 0x00, 0x04, 0x00, 0x0C, 0x6C, 0x69,
+	0x6E, 0x6B, 0x73, 0x79, 0x73, 0x5F, 0x77, 0x6C,
+	0x61, 0x6E, 0x01, 0x04, 0x82, 0x84, 0x8B, 0x96,
+	0x03, 0x01, 0x01, 0x06, 0x02, 0x00, 0x00, 0x2A,
+	0x01, 0x00, 0x32, 0x08, 0x24, 0x30, 0x48, 0x6C,
+	0x0C, 0x12, 0x18, 0x60, 0x2D, 0x1A, 0x6C, 0x18,
+	0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x3D, 0x00, 0xDD, 0x06, 0x00, 0xE0, 0x4C, 0x02,
+	0x01, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+
+	/* page 5  probe_resp */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct sk_buff *skb = NULL;
+
+	u32 totalpacketlen;
+	bool rtstatus;
+	u8 u1RsvdPageLoc[3] = {0};
+	bool b_dlok = false;
+
+	u8 *beacon;
+	u8 *p_pspoll;
+	u8 *nullfunc;
+	u8 *p_probersp;
+	/*---------------------------------------------------------
+				(1) beacon
+	---------------------------------------------------------*/
+	beacon = &reserved_page_packet[BEACON_PG * 128];
+	SET_80211_HDR_ADDRESS2(beacon, mac->mac_addr);
+	SET_80211_HDR_ADDRESS3(beacon, mac->bssid);
+
+	/*-------------------------------------------------------
+				(2) ps-poll
+	--------------------------------------------------------*/
+	p_pspoll = &reserved_page_packet[PSPOLL_PG * 128];
+	SET_80211_PS_POLL_AID(p_pspoll, (mac->assoc_id | 0xc000));
+	SET_80211_PS_POLL_BSSID(p_pspoll, mac->bssid);
+	SET_80211_PS_POLL_TA(p_pspoll, mac->mac_addr);
+
+	SET_H2CCMD_RSVDPAGE_LOC_PSPOLL(u1RsvdPageLoc, PSPOLL_PG);
+
+	/*--------------------------------------------------------
+				(3) null data
+	---------------------------------------------------------*/
+	nullfunc = &reserved_page_packet[NULL_PG * 128];
+	SET_80211_HDR_ADDRESS1(nullfunc, mac->bssid);
+	SET_80211_HDR_ADDRESS2(nullfunc, mac->mac_addr);
+	SET_80211_HDR_ADDRESS3(nullfunc, mac->bssid);
+
+	SET_H2CCMD_RSVDPAGE_LOC_NULL_DATA(u1RsvdPageLoc, NULL_PG);
+
+	/*---------------------------------------------------------
+				(4) probe response
+	----------------------------------------------------------*/
+	p_probersp = &reserved_page_packet[PROBERSP_PG * 128];
+	SET_80211_HDR_ADDRESS1(p_probersp, mac->bssid);
+	SET_80211_HDR_ADDRESS2(p_probersp, mac->mac_addr);
+	SET_80211_HDR_ADDRESS3(p_probersp, mac->bssid);
+
+	SET_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(u1RsvdPageLoc, PROBERSP_PG);
+
+	totalpacketlen = TOTAL_RESERVED_PKT_LEN;
+
+	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_LOUD,
+		      "rtl92c_set_fw_rsvdpagepkt(): HW_VAR_SET_TX_CMD: ALL\n",
+		      &reserved_page_packet[0], totalpacketlen);
+	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG,
+		      "rtl92c_set_fw_rsvdpagepkt(): HW_VAR_SET_TX_CMD: ALL\n",
+		      u1RsvdPageLoc, 3);
+
+
+	skb = dev_alloc_skb(totalpacketlen);
+	memcpy((u8 *) skb_put(skb, totalpacketlen),
+	       &reserved_page_packet, totalpacketlen);
+
+	rtstatus = _rtl92c_cmd_send_packet(hw, skb);
+
+	if (rtstatus)
+		b_dlok = true;
+
+	if (b_dlok) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 ("Set RSVD page location to Fw.\n"));
+		RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_DMESG,
+				"H2C_RSVDPAGE:\n",
+				u1RsvdPageLoc, 3);
+		rtl92c_fill_h2c_cmd(hw, H2C_RSVDPAGE,
+				    sizeof(u1RsvdPageLoc), u1RsvdPageLoc);
+	} else
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("Set RSVD page location to Fw FAIL!!!!!!.\n"));
+}
+
+void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus)
+{
+	u8 u1_joinbssrpt_parm[1] = {0};
+
+	SET_H2CCMD_JOINBSSRPT_PARM_OPMODE(u1_joinbssrpt_parm, mstatus);
+
+	rtl92c_fill_h2c_cmd(hw, H2C_JOINBSSRPT, 1, u1_joinbssrpt_parm);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/fw.h b/drivers/net/wireless/rtlwifi/rtl8192ce/fw.h
new file mode 100644
index 00000000000..3db33bd1466
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/fw.h
@@ -0,0 +1,98 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92C__FW__H__
+#define __RTL92C__FW__H__
+
+#define FW_8192C_SIZE				0x3000
+#define FW_8192C_START_ADDRESS			0x1000
+#define FW_8192C_END_ADDRESS			0x3FFF
+#define FW_8192C_PAGE_SIZE			4096
+#define FW_8192C_POLLING_DELAY			5
+#define FW_8192C_POLLING_TIMEOUT_COUNT		100
+
+#define IS_FW_HEADER_EXIST(_pfwhdr)	\
+	((_pfwhdr->signature&0xFFF0) == 0x92C0 ||\
+	(_pfwhdr->signature&0xFFF0) == 0x88C0)
+
+struct rtl92c_firmware_header {
+	u16 signature;
+	u8 category;
+	u8 function;
+	u16 version;
+	u8 subversion;
+	u8 rsvd1;
+	u8 month;
+	u8 date;
+	u8 hour;
+	u8 minute;
+	u16 ramcodeSize;
+	u16 rsvd2;
+	u32 svnindex;
+	u32 rsvd3;
+	u32 rsvd4;
+	u32 rsvd5;
+};
+
+enum rtl8192c_h2c_cmd {
+	H2C_AP_OFFLOAD = 0,
+	H2C_SETPWRMODE = 1,
+	H2C_JOINBSSRPT = 2,
+	H2C_RSVDPAGE = 3,
+	H2C_RSSI_REPORT = 5,
+	H2C_RA_MASK = 6,
+	MAX_H2CCMD
+};
+
+#define pagenum_128(_len)	(u32)(((_len)>>7) + ((_len)&0x7F ? 1 : 0))
+
+#define SET_H2CCMD_PWRMODE_PARM_MODE(__ph2ccmd, __val)			\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 8, __val)
+#define SET_H2CCMD_PWRMODE_PARM_SMART_PS(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 8, __val)
+#define SET_H2CCMD_PWRMODE_PARM_BCN_PASS_TIME(__ph2ccmd, __val)	\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+2, 0, 8, __val)
+#define SET_H2CCMD_JOINBSSRPT_PARM_OPMODE(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 8, __val)
+#define SET_H2CCMD_RSVDPAGE_LOC_PROBE_RSP(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE(__ph2ccmd, 0, 8, __val)
+#define SET_H2CCMD_RSVDPAGE_LOC_PSPOLL(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+1, 0, 8, __val)
+#define SET_H2CCMD_RSVDPAGE_LOC_NULL_DATA(__ph2ccmd, __val)		\
+	SET_BITS_TO_LE_1BYTE((__ph2ccmd)+2, 0, 8, __val)
+
+int rtl92c_download_fw(struct ieee80211_hw *hw);
+void rtl92c_fill_h2c_cmd(struct ieee80211_hw *hw, u8 element_id,
+			 u32 cmd_len, u8 *p_cmdbuffer);
+void rtl92c_firmware_selfreset(struct ieee80211_hw *hw);
+void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
+void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished);
+void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
new file mode 100644
index 00000000000..1c41a0c9350
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -0,0 +1,2162 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../efuse.h"
+#include "../base.h"
+#include "../cam.h"
+#include "../ps.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "fw.h"
+#include "led.h"
+#include "hw.h"
+
+#define LLT_CONFIG	5
+
+static void _rtl92ce_set_bcn_ctrl_reg(struct ieee80211_hw *hw,
+				      u8 set_bits, u8 clear_bits)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtlpci->reg_bcn_ctrl_val |= set_bits;
+	rtlpci->reg_bcn_ctrl_val &= ~clear_bits;
+
+	rtl_write_byte(rtlpriv, REG_BCN_CTRL, (u8) rtlpci->reg_bcn_ctrl_val);
+}
+
+static void _rtl92ce_stop_tx_beacon(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 tmp1byte;
+
+	tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
+	rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte & (~BIT(6)));
+	rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0x64);
+	tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
+	tmp1byte &= ~(BIT(0));
+	rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
+}
+
+static void _rtl92ce_resume_tx_beacon(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 tmp1byte;
+
+	tmp1byte = rtl_read_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2);
+	rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2, tmp1byte | BIT(6));
+	rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
+	tmp1byte = rtl_read_byte(rtlpriv, REG_TBTT_PROHIBIT + 2);
+	tmp1byte |= BIT(0);
+	rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 2, tmp1byte);
+}
+
+static void _rtl92ce_enable_bcn_sub_func(struct ieee80211_hw *hw)
+{
+	_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(1));
+}
+
+static void _rtl92ce_disable_bcn_sub_func(struct ieee80211_hw *hw)
+{
+	_rtl92ce_set_bcn_ctrl_reg(hw, BIT(1), 0);
+}
+
+void rtl92ce_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	switch (variable) {
+	case HW_VAR_RCR:
+		*((u32 *) (val)) = rtlpci->receive_config;
+		break;
+	case HW_VAR_RF_STATE:
+		*((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
+		break;
+	case HW_VAR_FWLPS_RF_ON:{
+			enum rf_pwrstate rfState;
+			u32 val_rcr;
+
+			rtlpriv->cfg->ops->get_hw_reg(hw,
+						      HW_VAR_RF_STATE,
+						      (u8 *) (&rfState));
+			if (rfState == ERFOFF) {
+				*((bool *) (val)) = true;
+			} else {
+				val_rcr = rtl_read_dword(rtlpriv, REG_RCR);
+				val_rcr &= 0x00070000;
+				if (val_rcr)
+					*((bool *) (val)) = false;
+				else
+					*((bool *) (val)) = true;
+			}
+			break;
+		}
+	case HW_VAR_FW_PSMODE_STATUS:
+		*((bool *) (val)) = ppsc->b_fw_current_inpsmode;
+		break;
+	case HW_VAR_CORRECT_TSF:{
+		u64 tsf;
+		u32 *ptsf_low = (u32 *)&tsf;
+		u32 *ptsf_high = ((u32 *)&tsf) + 1;
+
+		*ptsf_high = rtl_read_dword(rtlpriv, (REG_TSFTR + 4));
+		*ptsf_low = rtl_read_dword(rtlpriv, REG_TSFTR);
+
+		*((u64 *) (val)) = tsf;
+
+		break;
+		}
+	case HW_VAR_MGT_FILTER:
+		*((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP0);
+		break;
+	case HW_VAR_CTRL_FILTER:
+		*((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP1);
+		break;
+	case HW_VAR_DATA_FILTER:
+		*((u16 *) (val)) = rtl_read_word(rtlpriv, REG_RXFLTMAP2);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+}
+
+void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u8 idx;
+
+	switch (variable) {
+	case HW_VAR_ETHER_ADDR:{
+			for (idx = 0; idx < ETH_ALEN; idx++) {
+				rtl_write_byte(rtlpriv, (REG_MACID + idx),
+					       val[idx]);
+			}
+			break;
+		}
+	case HW_VAR_BASIC_RATE:{
+			u16 b_rate_cfg = ((u16 *) val)[0];
+			u8 rate_index = 0;
+			b_rate_cfg = b_rate_cfg & 0x15f;
+			b_rate_cfg |= 0x01;
+			rtl_write_byte(rtlpriv, REG_RRSR, b_rate_cfg & 0xff);
+			rtl_write_byte(rtlpriv, REG_RRSR + 1,
+				       (b_rate_cfg >> 8)&0xff);
+			while (b_rate_cfg > 0x1) {
+				b_rate_cfg = (b_rate_cfg >> 1);
+				rate_index++;
+			}
+			rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL,
+				       rate_index);
+			break;
+		}
+	case HW_VAR_BSSID:{
+			for (idx = 0; idx < ETH_ALEN; idx++) {
+				rtl_write_byte(rtlpriv, (REG_BSSID + idx),
+					       val[idx]);
+			}
+			break;
+		}
+	case HW_VAR_SIFS:{
+			rtl_write_byte(rtlpriv, REG_SIFS_CTX + 1, val[0]);
+			rtl_write_byte(rtlpriv, REG_SIFS_TRX + 1, val[1]);
+
+			rtl_write_byte(rtlpriv, REG_SPEC_SIFS + 1, val[0]);
+			rtl_write_byte(rtlpriv, REG_MAC_SPEC_SIFS + 1, val[0]);
+
+			if (!mac->ht_enable)
+				rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
+					       0x0e0e);
+			else
+				rtl_write_word(rtlpriv, REG_RESP_SIFS_OFDM,
+					       *((u16 *) val));
+			break;
+		}
+	case HW_VAR_SLOT_TIME:{
+			u8 e_aci;
+
+			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+				 ("HW_VAR_SLOT_TIME %x\n", val[0]));
+
+			rtl_write_byte(rtlpriv, REG_SLOT, val[0]);
+
+			for (e_aci = 0; e_aci < AC_MAX; e_aci++) {
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+							      HW_VAR_AC_PARAM,
+							      (u8 *) (&e_aci));
+			}
+			break;
+		}
+	case HW_VAR_ACK_PREAMBLE:{
+			u8 reg_tmp;
+			u8 short_preamble = (bool) (*(u8 *) val);
+			reg_tmp = (mac->cur_40_prime_sc) << 5;
+			if (short_preamble)
+				reg_tmp |= 0x80;
+
+			rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_tmp);
+			break;
+		}
+	case HW_VAR_AMPDU_MIN_SPACE:{
+			u8 min_spacing_to_set;
+			u8 sec_min_space;
+
+			min_spacing_to_set = *((u8 *) val);
+			if (min_spacing_to_set <= 7) {
+				sec_min_space = 0;
+
+				if (min_spacing_to_set < sec_min_space)
+					min_spacing_to_set = sec_min_space;
+
+				mac->min_space_cfg = ((mac->min_space_cfg &
+						       0xf8) |
+						      min_spacing_to_set);
+
+				*val = min_spacing_to_set;
+
+				RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+					 ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n",
+					  mac->min_space_cfg));
+
+				rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
+					       mac->min_space_cfg);
+			}
+			break;
+		}
+	case HW_VAR_SHORTGI_DENSITY:{
+			u8 density_to_set;
+
+			density_to_set = *((u8 *) val);
+			mac->min_space_cfg |= (density_to_set << 3);
+
+			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+				 ("Set HW_VAR_SHORTGI_DENSITY: %#x\n",
+				  mac->min_space_cfg));
+
+			rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE,
+				       mac->min_space_cfg);
+
+			break;
+		}
+	case HW_VAR_AMPDU_FACTOR:{
+			u8 regtoset_normal[4] = { 0x41, 0xa8, 0x72, 0xb9 };
+
+			u8 factor_toset;
+			u8 *p_regtoset = NULL;
+			u8 index = 0;
+
+			p_regtoset = regtoset_normal;
+
+			factor_toset = *((u8 *) val);
+			if (factor_toset <= 3) {
+				factor_toset = (1 << (factor_toset + 2));
+				if (factor_toset > 0xf)
+					factor_toset = 0xf;
+
+				for (index = 0; index < 4; index++) {
+					if ((p_regtoset[index] & 0xf0) >
+					    (factor_toset << 4))
+						p_regtoset[index] =
+						    (p_regtoset[index] & 0x0f) |
+						    (factor_toset << 4);
+
+					if ((p_regtoset[index] & 0x0f) >
+					    factor_toset)
+						p_regtoset[index] =
+						    (p_regtoset[index] & 0xf0) |
+						    (factor_toset);
+
+					rtl_write_byte(rtlpriv,
+						       (REG_AGGLEN_LMT + index),
+						       p_regtoset[index]);
+
+				}
+
+				RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+					 ("Set HW_VAR_AMPDU_FACTOR: %#x\n",
+					  factor_toset));
+			}
+			break;
+		}
+	case HW_VAR_AC_PARAM:{
+			u8 e_aci = *((u8 *) val);
+			u32 u4b_ac_param = 0;
+
+			u4b_ac_param |= (u32) mac->ac[e_aci].aifs;
+			u4b_ac_param |= ((u32) mac->ac[e_aci].cw_min
+					 & 0xF) << AC_PARAM_ECW_MIN_OFFSET;
+			u4b_ac_param |= ((u32) mac->ac[e_aci].cw_max &
+					 0xF) << AC_PARAM_ECW_MAX_OFFSET;
+			u4b_ac_param |= (u32) mac->ac[e_aci].tx_op
+			    << AC_PARAM_TXOP_LIMIT_OFFSET;
+
+			RT_TRACE(rtlpriv, COMP_MLME, DBG_LOUD,
+				 ("queue:%x, ac_param:%x\n", e_aci,
+				  u4b_ac_param));
+
+			switch (e_aci) {
+			case AC1_BK:
+				rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM,
+						u4b_ac_param);
+				break;
+			case AC0_BE:
+				rtl_write_dword(rtlpriv, REG_EDCA_BE_PARAM,
+						u4b_ac_param);
+				break;
+			case AC2_VI:
+				rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM,
+						u4b_ac_param);
+				break;
+			case AC3_VO:
+				rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM,
+						u4b_ac_param);
+				break;
+			default:
+				RT_ASSERT(false,
+				  ("SetHwReg8185(): invalid aci: %d !\n",
+				   e_aci));
+				break;
+			}
+
+			if (rtlpci->acm_method != eAcmWay2_SW)
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+							      HW_VAR_ACM_CTRL,
+							      (u8 *) (&e_aci));
+			break;
+		}
+	case HW_VAR_ACM_CTRL:{
+			u8 e_aci = *((u8 *) val);
+			union aci_aifsn *p_aci_aifsn =
+			    (union aci_aifsn *)(&(mac->ac[0].aifs));
+			u8 acm = p_aci_aifsn->f.acm;
+			u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL);
+
+			acm_ctrl =
+			    acm_ctrl | ((rtlpci->acm_method == 2) ? 0x0 : 0x1);
+
+			if (acm) {
+				switch (e_aci) {
+				case AC0_BE:
+					acm_ctrl |= AcmHw_BeqEn;
+					break;
+				case AC2_VI:
+					acm_ctrl |= AcmHw_ViqEn;
+					break;
+				case AC3_VO:
+					acm_ctrl |= AcmHw_VoqEn;
+					break;
+				default:
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("HW_VAR_ACM_CTRL acm set "
+						  "failed: eACI is %d\n", acm));
+					break;
+				}
+			} else {
+				switch (e_aci) {
+				case AC0_BE:
+					acm_ctrl &= (~AcmHw_BeqEn);
+					break;
+				case AC2_VI:
+					acm_ctrl &= (~AcmHw_ViqEn);
+					break;
+				case AC3_VO:
+					acm_ctrl &= (~AcmHw_BeqEn);
+					break;
+				default:
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+						 ("switch case not process\n"));
+					break;
+				}
+			}
+
+			RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
+				 ("SetHwReg8190pci(): [HW_VAR_ACM_CTRL] "
+				  "Write 0x%X\n", acm_ctrl));
+			rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl);
+			break;
+		}
+	case HW_VAR_RCR:{
+			rtl_write_dword(rtlpriv, REG_RCR, ((u32 *) (val))[0]);
+			rtlpci->receive_config = ((u32 *) (val))[0];
+			break;
+		}
+	case HW_VAR_RETRY_LIMIT:{
+			u8 retry_limit = ((u8 *) (val))[0];
+
+			rtl_write_word(rtlpriv, REG_RL,
+				       retry_limit << RETRY_LIMIT_SHORT_SHIFT |
+				       retry_limit << RETRY_LIMIT_LONG_SHIFT);
+			break;
+		}
+	case HW_VAR_DUAL_TSF_RST:
+		rtl_write_byte(rtlpriv, REG_DUAL_TSF_RST, (BIT(0) | BIT(1)));
+		break;
+	case HW_VAR_EFUSE_BYTES:
+		rtlefuse->efuse_usedbytes = *((u16 *) val);
+		break;
+	case HW_VAR_EFUSE_USAGE:
+		rtlefuse->efuse_usedpercentage = *((u8 *) val);
+		break;
+	case HW_VAR_IO_CMD:
+		rtl92c_phy_set_io_cmd(hw, (*(enum io_type *)val));
+		break;
+	case HW_VAR_WPA_CONFIG:
+		rtl_write_byte(rtlpriv, REG_SECCFG, *((u8 *) val));
+		break;
+	case HW_VAR_SET_RPWM:{
+			u8 rpwm_val;
+
+			rpwm_val = rtl_read_byte(rtlpriv, REG_PCIE_HRPWM);
+			udelay(1);
+
+			if (rpwm_val & BIT(7)) {
+				rtl_write_byte(rtlpriv, REG_PCIE_HRPWM,
+					       (*(u8 *) val));
+			} else {
+				rtl_write_byte(rtlpriv, REG_PCIE_HRPWM,
+					       ((*(u8 *) val) | BIT(7)));
+			}
+
+			break;
+		}
+	case HW_VAR_H2C_FW_PWRMODE:{
+			u8 psmode = (*(u8 *) val);
+
+			if ((psmode != FW_PS_ACTIVE_MODE) &&
+			    (!IS_92C_SERIAL(rtlhal->version))) {
+				rtl92c_dm_rf_saving(hw, true);
+			}
+
+			rtl92c_set_fw_pwrmode_cmd(hw, (*(u8 *) val));
+			break;
+		}
+	case HW_VAR_FW_PSMODE_STATUS:
+		ppsc->b_fw_current_inpsmode = *((bool *) val);
+		break;
+	case HW_VAR_H2C_FW_JOINBSSRPT:{
+			u8 mstatus = (*(u8 *) val);
+			u8 tmp_regcr, tmp_reg422;
+			bool b_recover = false;
+
+			if (mstatus == RT_MEDIA_CONNECT) {
+				rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AID,
+							      NULL);
+
+				tmp_regcr = rtl_read_byte(rtlpriv, REG_CR + 1);
+				rtl_write_byte(rtlpriv, REG_CR + 1,
+					       (tmp_regcr | BIT(0)));
+
+				_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(3));
+				_rtl92ce_set_bcn_ctrl_reg(hw, BIT(4), 0);
+
+				tmp_reg422 =
+				    rtl_read_byte(rtlpriv,
+						  REG_FWHW_TXQ_CTRL + 2);
+				if (tmp_reg422 & BIT(6))
+					b_recover = true;
+				rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
+					       tmp_reg422 & (~BIT(6)));
+
+				rtl92c_set_fw_rsvdpagepkt(hw, 0);
+
+				_rtl92ce_set_bcn_ctrl_reg(hw, BIT(3), 0);
+				_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(4));
+
+				if (b_recover) {
+					rtl_write_byte(rtlpriv,
+						       REG_FWHW_TXQ_CTRL + 2,
+						       tmp_reg422);
+				}
+
+				rtl_write_byte(rtlpriv, REG_CR + 1,
+					       (tmp_regcr & ~(BIT(0))));
+			}
+			rtl92c_set_fw_joinbss_report_cmd(hw, (*(u8 *) val));
+
+			break;
+		}
+	case HW_VAR_AID:{
+			u16 u2btmp;
+			u2btmp = rtl_read_word(rtlpriv, REG_BCN_PSR_RPT);
+			u2btmp &= 0xC000;
+			rtl_write_word(rtlpriv, REG_BCN_PSR_RPT, (u2btmp |
+						mac->assoc_id));
+
+			break;
+		}
+	case HW_VAR_CORRECT_TSF:{
+			u8 btype_ibss = ((u8 *) (val))[0];
+
+			/*btype_ibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ?
+					1 : 0;*/
+
+			if (btype_ibss == true)
+				_rtl92ce_stop_tx_beacon(hw);
+
+			_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(3));
+
+			rtl_write_dword(rtlpriv, REG_TSFTR,
+					(u32) (mac->tsf & 0xffffffff));
+			rtl_write_dword(rtlpriv, REG_TSFTR + 4,
+					(u32) ((mac->tsf >> 32)&0xffffffff));
+
+			_rtl92ce_set_bcn_ctrl_reg(hw, BIT(3), 0);
+
+			if (btype_ibss == true)
+				_rtl92ce_resume_tx_beacon(hw);
+
+			break;
+
+		}
+	case HW_VAR_MGT_FILTER:
+		rtl_write_word(rtlpriv, REG_RXFLTMAP0, *(u16 *) val);
+		break;
+	case HW_VAR_CTRL_FILTER:
+		rtl_write_word(rtlpriv, REG_RXFLTMAP1, *(u16 *) val);
+		break;
+	case HW_VAR_DATA_FILTER:
+		rtl_write_word(rtlpriv, REG_RXFLTMAP2, *(u16 *) val);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("switch case "
+							"not process\n"));
+		break;
+	}
+}
+
+static bool _rtl92ce_llt_write(struct ieee80211_hw *hw, u32 address, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	bool status = true;
+	long count = 0;
+	u32 value = _LLT_INIT_ADDR(address) |
+	    _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS);
+
+	rtl_write_dword(rtlpriv, REG_LLT_INIT, value);
+
+	do {
+		value = rtl_read_dword(rtlpriv, REG_LLT_INIT);
+		if (_LLT_NO_ACTIVE == _LLT_OP_VALUE(value))
+			break;
+
+		if (count > POLLING_LLT_THRESHOLD) {
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("Failed to polling write LLT done at "
+				  "address %d!\n", address));
+			status = false;
+			break;
+		}
+	} while (++count);
+
+	return status;
+}
+
+static bool _rtl92ce_llt_table_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	unsigned short i;
+	u8 txpktbuf_bndy;
+	u8 maxPage;
+	bool status;
+
+#if LLT_CONFIG == 1
+	maxPage = 255;
+	txpktbuf_bndy = 252;
+#elif LLT_CONFIG == 2
+	maxPage = 127;
+	txpktbuf_bndy = 124;
+#elif LLT_CONFIG == 3
+	maxPage = 255;
+	txpktbuf_bndy = 174;
+#elif LLT_CONFIG == 4
+	maxPage = 255;
+	txpktbuf_bndy = 246;
+#elif LLT_CONFIG == 5
+	maxPage = 255;
+	txpktbuf_bndy = 246;
+#endif
+
+#if LLT_CONFIG == 1
+	rtl_write_byte(rtlpriv, REG_RQPN_NPQ, 0x1c);
+	rtl_write_dword(rtlpriv, REG_RQPN, 0x80a71c1c);
+#elif LLT_CONFIG == 2
+	rtl_write_dword(rtlpriv, REG_RQPN, 0x845B1010);
+#elif LLT_CONFIG == 3
+	rtl_write_dword(rtlpriv, REG_RQPN, 0x84838484);
+#elif LLT_CONFIG == 4
+	rtl_write_dword(rtlpriv, REG_RQPN, 0x80bd1c1c);
+#elif LLT_CONFIG == 5
+	rtl_write_word(rtlpriv, REG_RQPN_NPQ, 0x0000);
+
+	rtl_write_dword(rtlpriv, REG_RQPN, 0x80b01c29);
+#endif
+
+	rtl_write_dword(rtlpriv, REG_TRXFF_BNDY, (0x27FF0000 | txpktbuf_bndy));
+	rtl_write_byte(rtlpriv, REG_TDECTRL + 1, txpktbuf_bndy);
+
+	rtl_write_byte(rtlpriv, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
+	rtl_write_byte(rtlpriv, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
+
+	rtl_write_byte(rtlpriv, 0x45D, txpktbuf_bndy);
+	rtl_write_byte(rtlpriv, REG_PBP, 0x11);
+	rtl_write_byte(rtlpriv, REG_RX_DRVINFO_SZ, 0x4);
+
+	for (i = 0; i < (txpktbuf_bndy - 1); i++) {
+		status = _rtl92ce_llt_write(hw, i, i + 1);
+		if (true != status)
+			return status;
+	}
+
+	status = _rtl92ce_llt_write(hw, (txpktbuf_bndy - 1), 0xFF);
+	if (true != status)
+		return status;
+
+	for (i = txpktbuf_bndy; i < maxPage; i++) {
+		status = _rtl92ce_llt_write(hw, i, (i + 1));
+		if (true != status)
+			return status;
+	}
+
+	status = _rtl92ce_llt_write(hw, maxPage, txpktbuf_bndy);
+	if (true != status)
+		return status;
+
+	return true;
+}
+
+static void _rtl92ce_gen_refresh_led_state(struct ieee80211_hw *hw)
+{
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+
+	if (rtlpci->up_first_time)
+		return;
+
+	if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
+		rtl92ce_sw_led_on(hw, pLed0);
+	else if (ppsc->rfoff_reason == RF_CHANGE_BY_INIT)
+		rtl92ce_sw_led_on(hw, pLed0);
+	else
+		rtl92ce_sw_led_off(hw, pLed0);
+
+}
+
+static bool _rtl92ce_init_mac(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	unsigned char bytetmp;
+	unsigned short wordtmp;
+	u16 retry;
+
+	rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x00);
+	rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b);
+	rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0F);
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1) | BIT(0);
+	udelay(2);
+
+	rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, bytetmp);
+	udelay(2);
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
+	udelay(2);
+
+	retry = 0;
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("reg0xec:%x:%x\n",
+						rtl_read_dword(rtlpriv, 0xEC),
+						bytetmp));
+
+	while ((bytetmp & BIT(0)) && retry < 1000) {
+		retry++;
+		udelay(50);
+		bytetmp = rtl_read_byte(rtlpriv, REG_APS_FSMCO + 1);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("reg0xec:%x:%x\n",
+							rtl_read_dword(rtlpriv,
+								       0xEC),
+							bytetmp));
+		udelay(50);
+	}
+
+	rtl_write_word(rtlpriv, REG_APS_FSMCO, 0x1012);
+
+	rtl_write_byte(rtlpriv, REG_SYS_ISO_CTRL + 1, 0x82);
+	udelay(2);
+
+	rtl_write_word(rtlpriv, REG_CR, 0x2ff);
+
+	if (_rtl92ce_llt_table_init(hw) == false)
+		return false;;
+
+	rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff);
+	rtl_write_byte(rtlpriv, REG_HISRE, 0xff);
+
+	rtl_write_word(rtlpriv, REG_TRXFF_BNDY + 2, 0x27ff);
+
+	wordtmp = rtl_read_word(rtlpriv, REG_TRXDMA_CTRL);
+	wordtmp &= 0xf;
+	wordtmp |= 0xF771;
+	rtl_write_word(rtlpriv, REG_TRXDMA_CTRL, wordtmp);
+
+	rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 1, 0x1F);
+	rtl_write_dword(rtlpriv, REG_RCR, rtlpci->receive_config);
+	rtl_write_dword(rtlpriv, REG_TCR, rtlpci->transmit_config);
+
+	rtl_write_byte(rtlpriv, 0x4d0, 0x0);
+
+	rtl_write_dword(rtlpriv, REG_BCNQ_DESA,
+			((u64) rtlpci->tx_ring[BEACON_QUEUE].dma) &
+			DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_MGQ_DESA,
+			(u64) rtlpci->tx_ring[MGNT_QUEUE].dma &
+			DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_VOQ_DESA,
+			(u64) rtlpci->tx_ring[VO_QUEUE].dma & DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_VIQ_DESA,
+			(u64) rtlpci->tx_ring[VI_QUEUE].dma & DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_BEQ_DESA,
+			(u64) rtlpci->tx_ring[BE_QUEUE].dma & DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_BKQ_DESA,
+			(u64) rtlpci->tx_ring[BK_QUEUE].dma & DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_HQ_DESA,
+			(u64) rtlpci->tx_ring[HIGH_QUEUE].dma &
+			DMA_BIT_MASK(32));
+	rtl_write_dword(rtlpriv, REG_RX_DESA,
+			(u64) rtlpci->rx_ring[RX_MPDU_QUEUE].dma &
+			DMA_BIT_MASK(32));
+
+	if (IS_92C_SERIAL(rtlhal->version))
+		rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x77);
+	else
+		rtl_write_byte(rtlpriv, REG_PCIE_CTRL_REG + 3, 0x22);
+
+	rtl_write_dword(rtlpriv, REG_INT_MIG, 0);
+
+	bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
+	rtl_write_byte(rtlpriv, REG_APSD_CTRL, bytetmp & ~BIT(6));
+	do {
+		retry++;
+		bytetmp = rtl_read_byte(rtlpriv, REG_APSD_CTRL);
+	} while ((retry < 200) && (bytetmp & BIT(7)));
+
+	_rtl92ce_gen_refresh_led_state(hw);
+
+	rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0);
+
+	return true;;
+}
+
+static void _rtl92ce_hw_configure(struct ieee80211_hw *hw)
+{
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 reg_bw_opmode;
+	u32 reg_ratr, reg_prsr;
+
+	reg_bw_opmode = BW_OPMODE_20MHZ;
+	reg_ratr = RATE_ALL_CCK | RATE_ALL_OFDM_AG |
+	    RATE_ALL_OFDM_1SS | RATE_ALL_OFDM_2SS;
+	reg_prsr = RATE_ALL_CCK | RATE_ALL_OFDM_AG;
+
+	rtl_write_byte(rtlpriv, REG_INIRTS_RATE_SEL, 0x8);
+
+	rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
+
+	rtl_write_dword(rtlpriv, REG_RRSR, reg_prsr);
+
+	rtl_write_byte(rtlpriv, REG_SLOT, 0x09);
+
+	rtl_write_byte(rtlpriv, REG_AMPDU_MIN_SPACE, 0x0);
+
+	rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F80);
+
+	rtl_write_word(rtlpriv, REG_RL, 0x0707);
+
+	rtl_write_dword(rtlpriv, REG_BAR_MODE_CTRL, 0x02012802);
+
+	rtl_write_byte(rtlpriv, REG_HWSEQ_CTRL, 0xFF);
+
+	rtl_write_dword(rtlpriv, REG_DARFRC, 0x01000000);
+	rtl_write_dword(rtlpriv, REG_DARFRC + 4, 0x07060504);
+	rtl_write_dword(rtlpriv, REG_RARFRC, 0x01000000);
+	rtl_write_dword(rtlpriv, REG_RARFRC + 4, 0x07060504);
+
+	rtl_write_dword(rtlpriv, REG_AGGLEN_LMT, 0xb972a841);
+
+	rtl_write_byte(rtlpriv, REG_ATIMWND, 0x2);
+
+	rtl_write_byte(rtlpriv, REG_BCN_MAX_ERR, 0xff);
+
+	rtlpci->reg_bcn_ctrl_val = 0x1f;
+	rtl_write_byte(rtlpriv, REG_BCN_CTRL, rtlpci->reg_bcn_ctrl_val);
+
+	rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
+
+	rtl_write_byte(rtlpriv, REG_TBTT_PROHIBIT + 1, 0xff);
+
+	rtl_write_byte(rtlpriv, REG_PIFS, 0x1C);
+	rtl_write_byte(rtlpriv, REG_AGGR_BREAK_TIME, 0x16);
+
+	rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
+
+	rtl_write_word(rtlpriv, REG_NAV_PROT_LEN, 0x0020);
+
+	rtl_write_dword(rtlpriv, REG_FAST_EDCA_CTRL, 0x086666);
+
+	rtl_write_byte(rtlpriv, REG_ACKTO, 0x40);
+
+	rtl_write_word(rtlpriv, REG_SPEC_SIFS, 0x1010);
+	rtl_write_word(rtlpriv, REG_MAC_SPEC_SIFS, 0x1010);
+
+	rtl_write_word(rtlpriv, REG_SIFS_CTX, 0x1010);
+
+	rtl_write_word(rtlpriv, REG_SIFS_TRX, 0x1010);
+
+	rtl_write_dword(rtlpriv, REG_MAR, 0xffffffff);
+	rtl_write_dword(rtlpriv, REG_MAR + 4, 0xffffffff);
+
+}
+
+static void _rtl92ce_enable_aspm_back_door(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	rtl_write_byte(rtlpriv, 0x34b, 0x93);
+	rtl_write_word(rtlpriv, 0x350, 0x870c);
+	rtl_write_byte(rtlpriv, 0x352, 0x1);
+
+	if (ppsc->b_support_backdoor)
+		rtl_write_byte(rtlpriv, 0x349, 0x1b);
+	else
+		rtl_write_byte(rtlpriv, 0x349, 0x03);
+
+	rtl_write_word(rtlpriv, 0x350, 0x2718);
+	rtl_write_byte(rtlpriv, 0x352, 0x1);
+}
+
+void rtl92ce_enable_hw_security_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 sec_reg_value;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 ("PairwiseEncAlgorithm = %d GroupEncAlgorithm = %d\n",
+		  rtlpriv->sec.pairwise_enc_algorithm,
+		  rtlpriv->sec.group_enc_algorithm));
+
+	if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) {
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("not open "
+							"hw encryption\n"));
+		return;
+	}
+
+	sec_reg_value = SCR_TxEncEnable | SCR_RxDecEnable;
+
+	if (rtlpriv->sec.use_defaultkey) {
+		sec_reg_value |= SCR_TxUseDK;
+		sec_reg_value |= SCR_RxUseDK;
+	}
+
+	sec_reg_value |= (SCR_RXBCUSEDK | SCR_TXBCUSEDK);
+
+	rtl_write_byte(rtlpriv, REG_CR + 1, 0x02);
+
+	RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+		 ("The SECR-value %x\n", sec_reg_value));
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_WPA_CONFIG, &sec_reg_value);
+
+}
+
+int rtl92ce_hw_init(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	static bool iqk_initialized; /* initialized to false */
+	bool rtstatus = true;
+	bool is92c;
+	int err;
+	u8 tmp_u1b;
+
+	rtlpci->being_init_adapter = true;
+	rtlpriv->intf_ops->disable_aspm(hw);
+	rtstatus = _rtl92ce_init_mac(hw);
+	if (rtstatus != true) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Init MAC failed\n"));
+		err = 1;
+		return err;
+	}
+
+	err = rtl92c_download_fw(hw);
+	if (err) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("Failed to download FW. Init HW "
+			  "without FW now..\n"));
+		err = 1;
+		rtlhal->bfw_ready = false;
+		return err;
+	} else {
+		rtlhal->bfw_ready = true;
+	}
+
+	rtlhal->last_hmeboxnum = 0;
+	rtl92c_phy_mac_config(hw);
+	rtl92c_phy_bb_config(hw);
+	rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
+	rtl92c_phy_rf_config(hw);
+	rtlphy->rfreg_chnlval[0] = rtl_get_rfreg(hw, (enum radio_path)0,
+						 RF_CHNLBW, RFREG_OFFSET_MASK);
+	rtlphy->rfreg_chnlval[1] = rtl_get_rfreg(hw, (enum radio_path)1,
+						 RF_CHNLBW, RFREG_OFFSET_MASK);
+	rtl_set_bbreg(hw, RFPGA0_RFMOD, BCCKEN, 0x1);
+	rtl_set_bbreg(hw, RFPGA0_RFMOD, BOFDMEN, 0x1);
+	rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10), 1);
+	_rtl92ce_hw_configure(hw);
+	rtl_cam_reset_all_entry(hw);
+	rtl92ce_enable_hw_security_config(hw);
+	ppsc->rfpwr_state = ERFON;
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ETHER_ADDR, mac->mac_addr);
+	_rtl92ce_enable_aspm_back_door(hw);
+	rtlpriv->intf_ops->enable_aspm(hw);
+	if (ppsc->rfpwr_state == ERFON) {
+		rtl92c_phy_set_rfpath_switch(hw, 1);
+		if (iqk_initialized)
+			rtl92c_phy_iq_calibrate(hw, true);
+		else {
+			rtl92c_phy_iq_calibrate(hw, false);
+			iqk_initialized = true;
+		}
+
+		rtl92c_dm_check_txpower_tracking(hw);
+		rtl92c_phy_lc_calibrate(hw);
+	}
+
+	is92c = IS_92C_SERIAL(rtlhal->version);
+	tmp_u1b = efuse_read_1byte(hw, 0x1FA);
+	if (!(tmp_u1b & BIT(0))) {
+		rtl_set_rfreg(hw, RF90_PATH_A, 0x15, 0x0F, 0x05);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("PA BIAS path A\n"));
+	}
+
+	if (!(tmp_u1b & BIT(1)) && is92c) {
+		rtl_set_rfreg(hw, RF90_PATH_B, 0x15, 0x0F, 0x05);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("PA BIAS path B\n"));
+	}
+
+	if (!(tmp_u1b & BIT(4))) {
+		tmp_u1b = rtl_read_byte(rtlpriv, 0x16);
+		tmp_u1b &= 0x0F;
+		rtl_write_byte(rtlpriv, 0x16, tmp_u1b | 0x80);
+		udelay(10);
+		rtl_write_byte(rtlpriv, 0x16, tmp_u1b | 0x90);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("under 1.5V\n"));
+	}
+	rtl92c_dm_init(hw);
+	rtlpci->being_init_adapter = false;
+	return err;
+}
+
+static enum version_8192c _rtl92ce_read_chip_version(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	enum version_8192c version = VERSION_UNKNOWN;
+	u32 value32;
+
+	value32 = rtl_read_dword(rtlpriv, REG_SYS_CFG);
+	if (value32 & TRP_VAUX_EN) {
+		version = (value32 & TYPE_ID) ? VERSION_A_CHIP_92C :
+			   VERSION_A_CHIP_88C;
+	} else {
+		version = (value32 & TYPE_ID) ? VERSION_B_CHIP_92C :
+			   VERSION_B_CHIP_88C;
+	}
+
+	switch (version) {
+	case VERSION_B_CHIP_92C:
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Chip Version ID: VERSION_B_CHIP_92C.\n"));
+		break;
+	case VERSION_B_CHIP_88C:
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Chip Version ID: VERSION_B_CHIP_88C.\n"));
+		break;
+	case VERSION_A_CHIP_92C:
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Chip Version ID: VERSION_A_CHIP_92C.\n"));
+		break;
+	case VERSION_A_CHIP_88C:
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Chip Version ID: VERSION_A_CHIP_88C.\n"));
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Chip Version ID: Unknown. Bug?\n"));
+		break;
+	}
+
+	switch (version & 0x3) {
+	case CHIP_88C:
+		rtlphy->rf_type = RF_1T1R;
+		break;
+	case CHIP_92C:
+		rtlphy->rf_type = RF_2T2R;
+		break;
+	case CHIP_92C_1T2R:
+		rtlphy->rf_type = RF_1T2R;
+		break;
+	default:
+		rtlphy->rf_type = RF_1T1R;
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("ERROR RF_Type is set!!"));
+		break;
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 ("Chip RF Type: %s\n", (rtlphy->rf_type == RF_2T2R) ?
+		  "RF_2T2R" : "RF_1T1R"));
+
+	return version;
+}
+
+static int _rtl92ce_set_media_status(struct ieee80211_hw *hw,
+				     enum nl80211_iftype type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u8 bt_msr = rtl_read_byte(rtlpriv, MSR);
+	enum led_ctl_mode ledaction = LED_CTL_NO_LINK;
+	bt_msr &= 0xfc;
+
+	if (type == NL80211_IFTYPE_UNSPECIFIED ||
+	    type == NL80211_IFTYPE_STATION) {
+		_rtl92ce_stop_tx_beacon(hw);
+		_rtl92ce_enable_bcn_sub_func(hw);
+	} else if (type == NL80211_IFTYPE_ADHOC || type == NL80211_IFTYPE_AP) {
+		_rtl92ce_resume_tx_beacon(hw);
+		_rtl92ce_disable_bcn_sub_func(hw);
+	} else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("Set HW_VAR_MEDIA_STATUS: "
+			  "No such media status(%x).\n", type));
+	}
+
+	switch (type) {
+	case NL80211_IFTYPE_UNSPECIFIED:
+		bt_msr |= MSR_NOLINK;
+		ledaction = LED_CTL_LINK;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to NO LINK!\n"));
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		bt_msr |= MSR_ADHOC;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to Ad Hoc!\n"));
+		break;
+	case NL80211_IFTYPE_STATION:
+		bt_msr |= MSR_INFRA;
+		ledaction = LED_CTL_LINK;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to STA!\n"));
+		break;
+	case NL80211_IFTYPE_AP:
+		bt_msr |= MSR_AP;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Set Network type to AP!\n"));
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Network type %d not support!\n", type));
+		return 1;
+		break;
+
+	}
+
+	rtl_write_byte(rtlpriv, (MSR), bt_msr);
+	rtlpriv->cfg->ops->led_control(hw, ledaction);
+	if ((bt_msr & 0xfc) == MSR_AP)
+		rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x00);
+	else
+		rtl_write_byte(rtlpriv, REG_BCNTCFG + 1, 0x66);
+	return 0;
+}
+
+static void _rtl92ce_set_check_bssid(struct ieee80211_hw *hw,
+				     enum nl80211_iftype type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 reg_rcr = rtl_read_dword(rtlpriv, REG_RCR);
+	u8 filterout_non_associated_bssid = false;
+
+	switch (type) {
+	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_STATION:
+		filterout_non_associated_bssid = true;
+		break;
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NL80211_IFTYPE_AP:
+	default:
+		break;
+	}
+
+	if (filterout_non_associated_bssid == true) {
+		reg_rcr |= (RCR_CBSSID_DATA | RCR_CBSSID_BCN);
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RCR,
+					      (u8 *) (&reg_rcr));
+		_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(4));
+	} else if (filterout_non_associated_bssid == false) {
+		reg_rcr &= (~(RCR_CBSSID_DATA | RCR_CBSSID_BCN));
+		_rtl92ce_set_bcn_ctrl_reg(hw, BIT(4), 0);
+		rtlpriv->cfg->ops->set_hw_reg(hw,
+					      HW_VAR_RCR, (u8 *) (&reg_rcr));
+	}
+}
+
+int rtl92ce_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type)
+{
+	if (_rtl92ce_set_media_status(hw, type))
+		return -EOPNOTSUPP;
+	_rtl92ce_set_check_bssid(hw, type);
+	return 0;
+}
+
+void rtl92ce_set_qos(struct ieee80211_hw *hw, int aci)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	u32 u4b_ac_param;
+
+	rtl92c_dm_init_edca_turbo(hw);
+
+	u4b_ac_param = (u32) mac->ac[aci].aifs;
+	u4b_ac_param |=
+	    ((u32) mac->ac[aci].cw_min & 0xF) << AC_PARAM_ECW_MIN_OFFSET;
+	u4b_ac_param |=
+	    ((u32) mac->ac[aci].cw_max & 0xF) << AC_PARAM_ECW_MAX_OFFSET;
+	u4b_ac_param |= (u32) mac->ac[aci].tx_op << AC_PARAM_TXOP_LIMIT_OFFSET;
+	RT_TRACE(rtlpriv, COMP_QOS, DBG_DMESG,
+		 ("queue:%x, ac_param:%x aifs:%x cwmin:%x cwmax:%x txop:%x\n",
+		  aci, u4b_ac_param, mac->ac[aci].aifs, mac->ac[aci].cw_min,
+		  mac->ac[aci].cw_max, mac->ac[aci].tx_op));
+	switch (aci) {
+	case AC1_BK:
+		rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, u4b_ac_param);
+		break;
+	case AC0_BE:
+		rtl_write_dword(rtlpriv, REG_EDCA_BE_PARAM, u4b_ac_param);
+		break;
+	case AC2_VI:
+		rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, u4b_ac_param);
+		break;
+	case AC3_VO:
+		rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, u4b_ac_param);
+		break;
+	default:
+		RT_ASSERT(false, ("invalid aci: %d !\n", aci));
+		break;
+	}
+}
+
+void rtl92ce_enable_interrupt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtl_write_dword(rtlpriv, REG_HIMR, rtlpci->irq_mask[0] & 0xFFFFFFFF);
+	rtl_write_dword(rtlpriv, REG_HIMRE, rtlpci->irq_mask[1] & 0xFFFFFFFF);
+	rtlpci->irq_enabled = true;
+}
+
+void rtl92ce_disable_interrupt(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtl_write_dword(rtlpriv, REG_HIMR, IMR8190_DISABLED);
+	rtl_write_dword(rtlpriv, REG_HIMRE, IMR8190_DISABLED);
+	rtlpci->irq_enabled = false;
+}
+
+static void _rtl92ce_poweroff_adapter(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 u1b_tmp;
+
+	rtlpriv->intf_ops->enable_aspm(hw);
+	rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF);
+	rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00);
+	rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x00);
+	rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE0);
+	if ((rtl_read_byte(rtlpriv, REG_MCUFWDL) & BIT(7)) && rtlhal->bfw_ready)
+		rtl92c_firmware_selfreset(hw);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, 0x51);
+	rtl_write_byte(rtlpriv, REG_MCUFWDL, 0x00);
+	rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00000000);
+	u1b_tmp = rtl_read_byte(rtlpriv, REG_GPIO_PIN_CTRL);
+	rtl_write_dword(rtlpriv, REG_GPIO_PIN_CTRL, 0x00FF0000 |
+			(u1b_tmp << 8));
+	rtl_write_word(rtlpriv, REG_GPIO_IO_SEL, 0x0790);
+	rtl_write_word(rtlpriv, REG_LEDCFG0, 0x8080);
+	rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x80);
+	rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x23);
+	rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL, 0x0e);
+	rtl_write_byte(rtlpriv, REG_RSV_CTRL, 0x0e);
+	rtl_write_byte(rtlpriv, REG_APS_FSMCO + 1, 0x10);
+}
+
+void rtl92ce_card_disable(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	enum nl80211_iftype opmode;
+
+	mac->link_state = MAC80211_NOLINK;
+	opmode = NL80211_IFTYPE_UNSPECIFIED;
+	_rtl92ce_set_media_status(hw, opmode);
+	if (rtlpci->driver_is_goingto_unload ||
+	    ppsc->rfoff_reason > RF_CHANGE_BY_PS)
+		rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_OFF);
+	RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+	_rtl92ce_poweroff_adapter(hw);
+}
+
+void rtl92ce_interrupt_recognized(struct ieee80211_hw *hw,
+				  u32 *p_inta, u32 *p_intb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	*p_inta = rtl_read_dword(rtlpriv, ISR) & rtlpci->irq_mask[0];
+	rtl_write_dword(rtlpriv, ISR, *p_inta);
+
+	/*
+	 * *p_intb = rtl_read_dword(rtlpriv, REG_HISRE) & rtlpci->irq_mask[1];
+	 * rtl_write_dword(rtlpriv, ISR + 4, *p_intb);
+	 */
+}
+
+void rtl92ce_set_beacon_related_registers(struct ieee80211_hw *hw)
+{
+
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 bcn_interval, atim_window;
+
+	bcn_interval = mac->beacon_interval;
+	atim_window = 2;	/*FIX MERGE */
+	rtl92ce_disable_interrupt(hw);
+	rtl_write_word(rtlpriv, REG_ATIMWND, atim_window);
+	rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
+	rtl_write_word(rtlpriv, REG_BCNTCFG, 0x660f);
+	rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_CCK, 0x18);
+	rtl_write_byte(rtlpriv, REG_RXTSF_OFFSET_OFDM, 0x18);
+	rtl_write_byte(rtlpriv, 0x606, 0x30);
+	rtl92ce_enable_interrupt(hw);
+}
+
+void rtl92ce_set_beacon_interval(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 bcn_interval = mac->beacon_interval;
+
+	RT_TRACE(rtlpriv, COMP_BEACON, DBG_DMESG,
+		 ("beacon_interval:%d\n", bcn_interval));
+	rtl92ce_disable_interrupt(hw);
+	rtl_write_word(rtlpriv, REG_BCN_INTERVAL, bcn_interval);
+	rtl92ce_enable_interrupt(hw);
+}
+
+void rtl92ce_update_interrupt_mask(struct ieee80211_hw *hw,
+				   u32 add_msr, u32 rm_msr)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	RT_TRACE(rtlpriv, COMP_INTR, DBG_LOUD,
+		 ("add_msr:%x, rm_msr:%x\n", add_msr, rm_msr));
+	if (add_msr)
+		rtlpci->irq_mask[0] |= add_msr;
+	if (rm_msr)
+		rtlpci->irq_mask[0] &= (~rm_msr);
+	rtl92ce_disable_interrupt(hw);
+	rtl92ce_enable_interrupt(hw);
+}
+
+static u8 _rtl92c_get_chnl_group(u8 chnl)
+{
+	u8 group;
+
+	if (chnl < 3)
+		group = 0;
+	else if (chnl < 9)
+		group = 1;
+	else
+		group = 2;
+	return group;
+}
+
+static void _rtl92ce_read_txpower_info_from_hwpg(struct ieee80211_hw *hw,
+						 bool autoload_fail,
+						 u8 *hwinfo)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 rf_path, index, tempval;
+	u16 i;
+
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+		for (i = 0; i < 3; i++) {
+			if (!autoload_fail) {
+				rtlefuse->
+				    eeprom_chnlarea_txpwr_cck[rf_path][i] =
+				    hwinfo[EEPROM_TXPOWERCCK + rf_path * 3 + i];
+				rtlefuse->
+				    eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] =
+				    hwinfo[EEPROM_TXPOWERHT40_1S + rf_path * 3 +
+					   i];
+			} else {
+				rtlefuse->
+				    eeprom_chnlarea_txpwr_cck[rf_path][i] =
+				    EEPROM_DEFAULT_TXPOWERLEVEL;
+				rtlefuse->
+				    eeprom_chnlarea_txpwr_ht40_1s[rf_path][i] =
+				    EEPROM_DEFAULT_TXPOWERLEVEL;
+			}
+		}
+	}
+
+	for (i = 0; i < 3; i++) {
+		if (!autoload_fail)
+			tempval = hwinfo[EEPROM_TXPOWERHT40_2SDIFF + i];
+		else
+			tempval = EEPROM_DEFAULT_HT40_2SDIFF;
+		rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif[RF90_PATH_A][i] =
+		    (tempval & 0xf);
+		rtlefuse->eeprom_chnlarea_txpwr_ht40_2sdiif[RF90_PATH_B][i] =
+		    ((tempval & 0xf0) >> 4);
+	}
+
+	for (rf_path = 0; rf_path < 2; rf_path++)
+		for (i = 0; i < 3; i++)
+			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+				("RF(%d) EEPROM CCK Area(%d) = 0x%x\n", rf_path,
+				 i,
+				 rtlefuse->
+				 eeprom_chnlarea_txpwr_cck[rf_path][i]));
+	for (rf_path = 0; rf_path < 2; rf_path++)
+		for (i = 0; i < 3; i++)
+			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+				("RF(%d) EEPROM HT40 1S Area(%d) = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->
+				 eeprom_chnlarea_txpwr_ht40_1s[rf_path][i]));
+	for (rf_path = 0; rf_path < 2; rf_path++)
+		for (i = 0; i < 3; i++)
+			RTPRINT(rtlpriv, FINIT, INIT_EEPROM,
+				("RF(%d) EEPROM HT40 2S Diff Area(%d) = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->
+				 eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path]
+				 [i]));
+
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+		for (i = 0; i < 14; i++) {
+			index = _rtl92c_get_chnl_group((u8) i);
+
+			rtlefuse->txpwrlevel_cck[rf_path][i] =
+			    rtlefuse->eeprom_chnlarea_txpwr_cck[rf_path][index];
+			rtlefuse->txpwrlevel_ht40_1s[rf_path][i] =
+			    rtlefuse->
+			    eeprom_chnlarea_txpwr_ht40_1s[rf_path][index];
+
+			if ((rtlefuse->
+			     eeprom_chnlarea_txpwr_ht40_1s[rf_path][index] -
+			     rtlefuse->
+			     eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path][index])
+			    > 0) {
+				rtlefuse->txpwrlevel_ht40_2s[rf_path][i] =
+				    rtlefuse->
+				    eeprom_chnlarea_txpwr_ht40_1s[rf_path]
+				    [index] -
+				    rtlefuse->
+				    eeprom_chnlarea_txpwr_ht40_2sdiif[rf_path]
+				    [index];
+			} else {
+				rtlefuse->txpwrlevel_ht40_2s[rf_path][i] = 0;
+			}
+		}
+
+		for (i = 0; i < 14; i++) {
+			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+				("RF(%d)-Ch(%d) [CCK / HT40_1S / HT40_2S] = "
+				 "[0x%x / 0x%x / 0x%x]\n", rf_path, i,
+				 rtlefuse->txpwrlevel_cck[rf_path][i],
+				 rtlefuse->txpwrlevel_ht40_1s[rf_path][i],
+				 rtlefuse->txpwrlevel_ht40_2s[rf_path][i]));
+		}
+	}
+
+	for (i = 0; i < 3; i++) {
+		if (!autoload_fail) {
+			rtlefuse->eeprom_pwrlimit_ht40[i] =
+			    hwinfo[EEPROM_TXPWR_GROUP + i];
+			rtlefuse->eeprom_pwrlimit_ht20[i] =
+			    hwinfo[EEPROM_TXPWR_GROUP + 3 + i];
+		} else {
+			rtlefuse->eeprom_pwrlimit_ht40[i] = 0;
+			rtlefuse->eeprom_pwrlimit_ht20[i] = 0;
+		}
+	}
+
+	for (rf_path = 0; rf_path < 2; rf_path++) {
+		for (i = 0; i < 14; i++) {
+			index = _rtl92c_get_chnl_group((u8) i);
+
+			if (rf_path == RF90_PATH_A) {
+				rtlefuse->pwrgroup_ht20[rf_path][i] =
+				    (rtlefuse->eeprom_pwrlimit_ht20[index]
+				     & 0xf);
+				rtlefuse->pwrgroup_ht40[rf_path][i] =
+				    (rtlefuse->eeprom_pwrlimit_ht40[index]
+				     & 0xf);
+			} else if (rf_path == RF90_PATH_B) {
+				rtlefuse->pwrgroup_ht20[rf_path][i] =
+				    ((rtlefuse->eeprom_pwrlimit_ht20[index]
+				      & 0xf0) >> 4);
+				rtlefuse->pwrgroup_ht40[rf_path][i] =
+				    ((rtlefuse->eeprom_pwrlimit_ht40[index]
+				      & 0xf0) >> 4);
+			}
+
+			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+				("RF-%d pwrgroup_ht20[%d] = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->pwrgroup_ht20[rf_path][i]));
+			RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+				("RF-%d pwrgroup_ht40[%d] = 0x%x\n",
+				 rf_path, i,
+				 rtlefuse->pwrgroup_ht40[rf_path][i]));
+		}
+	}
+
+	for (i = 0; i < 14; i++) {
+		index = _rtl92c_get_chnl_group((u8) i);
+
+		if (!autoload_fail)
+			tempval = hwinfo[EEPROM_TXPOWERHT20DIFF + index];
+		else
+			tempval = EEPROM_DEFAULT_HT20_DIFF;
+
+		rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] = (tempval & 0xF);
+		rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] =
+		    ((tempval >> 4) & 0xF);
+
+		if (rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] & BIT(3))
+			rtlefuse->txpwr_ht20diff[RF90_PATH_A][i] |= 0xF0;
+
+		if (rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] & BIT(3))
+			rtlefuse->txpwr_ht20diff[RF90_PATH_B][i] |= 0xF0;
+
+		index = _rtl92c_get_chnl_group((u8) i);
+
+		if (!autoload_fail)
+			tempval = hwinfo[EEPROM_TXPOWER_OFDMDIFF + index];
+		else
+			tempval = EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF;
+
+		rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i] = (tempval & 0xF);
+		rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i] =
+		    ((tempval >> 4) & 0xF);
+	}
+
+	rtlefuse->legacy_ht_txpowerdiff =
+	    rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][7];
+
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-A Ht20 to HT40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_ht20diff[RF90_PATH_A][i]));
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-A Legacy to Ht40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_A][i]));
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-B Ht20 to HT40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_ht20diff[RF90_PATH_B][i]));
+	for (i = 0; i < 14; i++)
+		RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+			("RF-B Legacy to HT40 Diff[%d] = 0x%x\n", i,
+			 rtlefuse->txpwr_legacyhtdiff[RF90_PATH_B][i]));
+
+	if (!autoload_fail)
+		rtlefuse->eeprom_regulatory = (hwinfo[RF_OPTION1] & 0x7);
+	else
+		rtlefuse->eeprom_regulatory = 0;
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+		("eeprom_regulatory = 0x%x\n", rtlefuse->eeprom_regulatory));
+
+	if (!autoload_fail) {
+		rtlefuse->eeprom_tssi[RF90_PATH_A] = hwinfo[EEPROM_TSSI_A];
+		rtlefuse->eeprom_tssi[RF90_PATH_B] = hwinfo[EEPROM_TSSI_B];
+	} else {
+		rtlefuse->eeprom_tssi[RF90_PATH_A] = EEPROM_DEFAULT_TSSI;
+		rtlefuse->eeprom_tssi[RF90_PATH_B] = EEPROM_DEFAULT_TSSI;
+	}
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+		("TSSI_A = 0x%x, TSSI_B = 0x%x\n",
+		 rtlefuse->eeprom_tssi[RF90_PATH_A],
+		 rtlefuse->eeprom_tssi[RF90_PATH_B]));
+
+	if (!autoload_fail)
+		tempval = hwinfo[EEPROM_THERMAL_METER];
+	else
+		tempval = EEPROM_DEFAULT_THERMALMETER;
+	rtlefuse->eeprom_thermalmeter = (tempval & 0x1f);
+
+	if (rtlefuse->eeprom_thermalmeter == 0x1f || autoload_fail)
+		rtlefuse->b_apk_thermalmeterignore = true;
+
+	rtlefuse->thermalmeter[0] = rtlefuse->eeprom_thermalmeter;
+	RTPRINT(rtlpriv, FINIT, INIT_TxPower,
+		("thermalmeter = 0x%x\n", rtlefuse->eeprom_thermalmeter));
+}
+
+static void _rtl92ce_read_adapter_info(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u16 i, usvalue;
+	u8 hwinfo[HWSET_MAX_SIZE];
+	u16 eeprom_id;
+
+	if (rtlefuse->epromtype == EEPROM_BOOT_EFUSE) {
+		rtl_efuse_shadow_map_update(hw);
+
+		memcpy((void *)hwinfo,
+		       (void *)&rtlefuse->efuse_map[EFUSE_INIT_MAP][0],
+		       HWSET_MAX_SIZE);
+	} else if (rtlefuse->epromtype == EEPROM_93C46) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("RTL819X Not boot from eeprom, check it !!"));
+	}
+
+	RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_LOUD, ("MAP\n"),
+		      hwinfo, HWSET_MAX_SIZE);
+
+	eeprom_id = *((u16 *)&hwinfo[0]);
+	if (eeprom_id != RTL8190_EEPROM_ID) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("EEPROM ID(%#x) is invalid!!\n", eeprom_id));
+		rtlefuse->autoload_failflag = true;
+	} else {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+		rtlefuse->autoload_failflag = false;
+	}
+
+	if (rtlefuse->autoload_failflag == true)
+		return;
+
+	for (i = 0; i < 6; i += 2) {
+		usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
+		*((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 (MAC_FMT "\n", MAC_ARG(rtlefuse->dev_addr)));
+
+	_rtl92ce_read_txpower_info_from_hwpg(hw,
+					     rtlefuse->autoload_failflag,
+					     hwinfo);
+
+	rtlefuse->eeprom_channelplan = *(u8 *)&hwinfo[EEPROM_CHANNELPLAN];
+	rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
+	rtlefuse->b_txpwr_fromeprom = true;
+	rtlefuse->eeprom_oemid = *(u8 *)&hwinfo[EEPROM_CUSTOMER_ID];
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+		 ("EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid));
+
+	if (rtlhal->oem_id == RT_CID_DEFAULT) {
+		switch (rtlefuse->eeprom_oemid) {
+		case EEPROM_CID_DEFAULT:
+			if (rtlefuse->eeprom_did == 0x8176) {
+				if ((rtlefuse->eeprom_svid == 0x103C &&
+				     rtlefuse->eeprom_smid == 0x1629))
+					rtlhal->oem_id = RT_CID_819x_HP;
+				else
+					rtlhal->oem_id = RT_CID_DEFAULT;
+			} else {
+				rtlhal->oem_id = RT_CID_DEFAULT;
+			}
+			break;
+		case EEPROM_CID_TOSHIBA:
+			rtlhal->oem_id = RT_CID_TOSHIBA;
+			break;
+		case EEPROM_CID_QMI:
+			rtlhal->oem_id = RT_CID_819x_QMI;
+			break;
+		case EEPROM_CID_WHQL:
+		default:
+			rtlhal->oem_id = RT_CID_DEFAULT;
+			break;
+
+		}
+	}
+
+}
+
+static void _rtl92ce_hal_customized_behavior(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	switch (rtlhal->oem_id) {
+	case RT_CID_819x_HP:
+		pcipriv->ledctl.bled_opendrain = true;
+		break;
+	case RT_CID_819x_Lenovo:
+	case RT_CID_DEFAULT:
+	case RT_CID_TOSHIBA:
+	case RT_CID_CCX:
+	case RT_CID_819x_Acer:
+	case RT_CID_WHQL:
+	default:
+		break;
+	}
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG,
+		 ("RT Customized ID: 0x%02X\n", rtlhal->oem_id));
+}
+
+void rtl92ce_read_eeprom_info(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 tmp_u1b;
+
+	rtlhal->version = _rtl92ce_read_chip_version(hw);
+	if (get_rf_type(rtlphy) == RF_1T1R)
+		rtlpriv->dm.brfpath_rxenable[0] = true;
+	else
+		rtlpriv->dm.brfpath_rxenable[0] =
+		    rtlpriv->dm.brfpath_rxenable[1] = true;
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("VersionID = 0x%4x\n",
+						rtlhal->version));
+	tmp_u1b = rtl_read_byte(rtlpriv, REG_9346CR);
+	if (tmp_u1b & BIT(4)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EEPROM\n"));
+		rtlefuse->epromtype = EEPROM_93C46;
+	} else {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("Boot from EFUSE\n"));
+		rtlefuse->epromtype = EEPROM_BOOT_EFUSE;
+	}
+	if (tmp_u1b & BIT(5)) {
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Autoload OK\n"));
+		rtlefuse->autoload_failflag = false;
+		_rtl92ce_read_adapter_info(hw);
+	} else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Autoload ERR!!\n"));
+	}
+
+	_rtl92ce_hal_customized_behavior(hw);
+}
+
+void rtl92ce_update_hal_rate_table(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	u32 ratr_value = (u32) mac->basic_rates;
+	u8 *p_mcsrate = mac->mcs;
+	u8 ratr_index = 0;
+	u8 b_nmode = mac->ht_enable;
+	u8 mimo_ps = 1;
+	u16 shortgi_rate;
+	u32 tmp_ratr_value;
+	u8 b_curtxbw_40mhz = mac->bw_40;
+	u8 b_curshortgi_40mhz = mac->sgi_40;
+	u8 b_curshortgi_20mhz = mac->sgi_20;
+	enum wireless_mode wirelessmode = mac->mode;
+
+	ratr_value |= EF2BYTE((*(u16 *) (p_mcsrate))) << 12;
+
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		if (ratr_value & 0x0000000c)
+			ratr_value &= 0x0000000d;
+		else
+			ratr_value &= 0x0000000f;
+		break;
+	case WIRELESS_MODE_G:
+		ratr_value &= 0x00000FF5;
+		break;
+	case WIRELESS_MODE_N_24G:
+	case WIRELESS_MODE_N_5G:
+		b_nmode = 1;
+		if (mimo_ps == 0) {
+			ratr_value &= 0x0007F005;
+		} else {
+			u32 ratr_mask;
+
+			if (get_rf_type(rtlphy) == RF_1T2R ||
+			    get_rf_type(rtlphy) == RF_1T1R)
+				ratr_mask = 0x000ff005;
+			else
+				ratr_mask = 0x0f0ff005;
+
+			ratr_value &= ratr_mask;
+		}
+		break;
+	default:
+		if (rtlphy->rf_type == RF_1T2R)
+			ratr_value &= 0x000ff0ff;
+		else
+			ratr_value &= 0x0f0ff0ff;
+
+		break;
+	}
+
+	ratr_value &= 0x0FFFFFFF;
+
+	if (b_nmode && ((b_curtxbw_40mhz &&
+			 b_curshortgi_40mhz) || (!b_curtxbw_40mhz &&
+						 b_curshortgi_20mhz))) {
+
+		ratr_value |= 0x10000000;
+		tmp_ratr_value = (ratr_value >> 12);
+
+		for (shortgi_rate = 15; shortgi_rate > 0; shortgi_rate--) {
+			if ((1 << shortgi_rate) & tmp_ratr_value)
+				break;
+		}
+
+		shortgi_rate = (shortgi_rate << 12) | (shortgi_rate << 8) |
+		    (shortgi_rate << 4) | (shortgi_rate);
+	}
+
+	rtl_write_dword(rtlpriv, REG_ARFR0 + ratr_index * 4, ratr_value);
+
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+		 ("%x\n", rtl_read_dword(rtlpriv, REG_ARFR0)));
+}
+
+void rtl92ce_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u32 ratr_bitmap = (u32) mac->basic_rates;
+	u8 *p_mcsrate = mac->mcs;
+	u8 ratr_index;
+	u8 b_curtxbw_40mhz = mac->bw_40;
+	u8 b_curshortgi_40mhz = mac->sgi_40;
+	u8 b_curshortgi_20mhz = mac->sgi_20;
+	enum wireless_mode wirelessmode = mac->mode;
+	bool b_shortgi = false;
+	u8 rate_mask[5];
+	u8 macid = 0;
+	u8 mimops = 1;
+
+	ratr_bitmap |= (p_mcsrate[1] << 20) | (p_mcsrate[0] << 12);
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		ratr_index = RATR_INX_WIRELESS_B;
+		if (ratr_bitmap & 0x0000000c)
+			ratr_bitmap &= 0x0000000d;
+		else
+			ratr_bitmap &= 0x0000000f;
+		break;
+	case WIRELESS_MODE_G:
+		ratr_index = RATR_INX_WIRELESS_GB;
+
+		if (rssi_level == 1)
+			ratr_bitmap &= 0x00000f00;
+		else if (rssi_level == 2)
+			ratr_bitmap &= 0x00000ff0;
+		else
+			ratr_bitmap &= 0x00000ff5;
+		break;
+	case WIRELESS_MODE_A:
+		ratr_index = RATR_INX_WIRELESS_A;
+		ratr_bitmap &= 0x00000ff0;
+		break;
+	case WIRELESS_MODE_N_24G:
+	case WIRELESS_MODE_N_5G:
+		ratr_index = RATR_INX_WIRELESS_NGB;
+
+		if (mimops == 0) {
+			if (rssi_level == 1)
+				ratr_bitmap &= 0x00070000;
+			else if (rssi_level == 2)
+				ratr_bitmap &= 0x0007f000;
+			else
+				ratr_bitmap &= 0x0007f005;
+		} else {
+			if (rtlphy->rf_type == RF_1T2R ||
+			    rtlphy->rf_type == RF_1T1R) {
+				if (b_curtxbw_40mhz) {
+					if (rssi_level == 1)
+						ratr_bitmap &= 0x000f0000;
+					else if (rssi_level == 2)
+						ratr_bitmap &= 0x000ff000;
+					else
+						ratr_bitmap &= 0x000ff015;
+				} else {
+					if (rssi_level == 1)
+						ratr_bitmap &= 0x000f0000;
+					else if (rssi_level == 2)
+						ratr_bitmap &= 0x000ff000;
+					else
+						ratr_bitmap &= 0x000ff005;
+				}
+			} else {
+				if (b_curtxbw_40mhz) {
+					if (rssi_level == 1)
+						ratr_bitmap &= 0x0f0f0000;
+					else if (rssi_level == 2)
+						ratr_bitmap &= 0x0f0ff000;
+					else
+						ratr_bitmap &= 0x0f0ff015;
+				} else {
+					if (rssi_level == 1)
+						ratr_bitmap &= 0x0f0f0000;
+					else if (rssi_level == 2)
+						ratr_bitmap &= 0x0f0ff000;
+					else
+						ratr_bitmap &= 0x0f0ff005;
+				}
+			}
+		}
+
+		if ((b_curtxbw_40mhz && b_curshortgi_40mhz) ||
+		    (!b_curtxbw_40mhz && b_curshortgi_20mhz)) {
+
+			if (macid == 0)
+				b_shortgi = true;
+			else if (macid == 1)
+				b_shortgi = false;
+		}
+		break;
+	default:
+		ratr_index = RATR_INX_WIRELESS_NGB;
+
+		if (rtlphy->rf_type == RF_1T2R)
+			ratr_bitmap &= 0x000ff0ff;
+		else
+			ratr_bitmap &= 0x0f0ff0ff;
+		break;
+	}
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG,
+		 ("ratr_bitmap :%x\n", ratr_bitmap));
+	*(u32 *)&rate_mask = EF4BYTE((ratr_bitmap & 0x0fffffff) |
+				       (ratr_index << 28));
+	rate_mask[4] = macid | (b_shortgi ? 0x20 : 0x00) | 0x80;
+	RT_TRACE(rtlpriv, COMP_RATR, DBG_DMESG, ("Rate_index:%x, "
+						 "ratr_val:%x, %x:%x:%x:%x:%x\n",
+						 ratr_index, ratr_bitmap,
+						 rate_mask[0], rate_mask[1],
+						 rate_mask[2], rate_mask[3],
+						 rate_mask[4]));
+	rtl92c_fill_h2c_cmd(hw, H2C_RA_MASK, 5, rate_mask);
+}
+
+void rtl92ce_update_channel_access_setting(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u16 sifs_timer;
+
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
+				      (u8 *)&mac->slot_time);
+	if (!mac->ht_enable)
+		sifs_timer = 0x0a0a;
+	else
+		sifs_timer = 0x1010;
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SIFS, (u8 *)&sifs_timer);
+}
+
+bool rtl92ce_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	enum rf_pwrstate e_rfpowerstate_toset, cur_rfstate;
+	u8 u1tmp;
+	bool b_actuallyset = false;
+	unsigned long flag;
+
+	if ((rtlpci->up_first_time == 1) || (rtlpci->being_init_adapter))
+		return false;
+
+	if (ppsc->b_swrf_processing)
+		return false;
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+	if (ppsc->rfchange_inprogress) {
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+		return false;
+	} else {
+		ppsc->rfchange_inprogress = true;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+	}
+
+	cur_rfstate = ppsc->rfpwr_state;
+
+	if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
+	    RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM)) {
+		rtlpriv->intf_ops->disable_aspm(hw);
+		RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+	}
+
+	rtl_write_byte(rtlpriv, REG_MAC_PINMUX_CFG, rtl_read_byte(rtlpriv,
+		       REG_MAC_PINMUX_CFG)&~(BIT(3)));
+
+	u1tmp = rtl_read_byte(rtlpriv, REG_GPIO_IO_SEL);
+	e_rfpowerstate_toset = (u1tmp & BIT(3)) ? ERFON : ERFOFF;
+
+	if ((ppsc->b_hwradiooff == true) && (e_rfpowerstate_toset == ERFON)) {
+		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+			 ("GPIOChangeRF  - HW Radio ON, RF ON\n"));
+
+		e_rfpowerstate_toset = ERFON;
+		ppsc->b_hwradiooff = false;
+		b_actuallyset = true;
+	} else if ((ppsc->b_hwradiooff == false)
+		   && (e_rfpowerstate_toset == ERFOFF)) {
+		RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+			 ("GPIOChangeRF  - HW Radio OFF, RF OFF\n"));
+
+		e_rfpowerstate_toset = ERFOFF;
+		ppsc->b_hwradiooff = true;
+		b_actuallyset = true;
+	}
+
+	if (b_actuallyset) {
+		if (e_rfpowerstate_toset == ERFON) {
+			if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
+			    RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM)) {
+				rtlpriv->intf_ops->disable_aspm(hw);
+				RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+			}
+		}
+
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+
+		if (e_rfpowerstate_toset == ERFOFF) {
+			if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) {
+				rtlpriv->intf_ops->enable_aspm(hw);
+				RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+			}
+		}
+
+	} else if (e_rfpowerstate_toset == ERFOFF || cur_rfstate == ERFOFF) {
+		if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC)
+			RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+
+		if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) {
+			rtlpriv->intf_ops->enable_aspm(hw);
+			RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+		}
+
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+	} else {
+		spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+		ppsc->rfchange_inprogress = false;
+		spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+	}
+
+	*valid = 1;
+	return !ppsc->b_hwradiooff;
+
+}
+
+void rtl92ce_set_key(struct ieee80211_hw *hw, u32 key_index,
+		     u8 *p_macaddr, bool is_group, u8 enc_algo,
+		     bool is_wepkey, bool clear_all)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 *macaddr = p_macaddr;
+	u32 entry_id = 0;
+	bool is_pairwise = false;
+
+	static u8 cam_const_addr[4][6] = {
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},
+		{0x00, 0x00, 0x00, 0x00, 0x00, 0x03}
+	};
+	static u8 cam_const_broad[] = {
+		0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	};
+
+	if (clear_all) {
+		u8 idx = 0;
+		u8 cam_offset = 0;
+		u8 clear_number = 5;
+
+		RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, ("clear_all\n"));
+
+		for (idx = 0; idx < clear_number; idx++) {
+			rtl_cam_mark_invalid(hw, cam_offset + idx);
+			rtl_cam_empty_entry(hw, cam_offset + idx);
+
+			if (idx < 5) {
+				memset(rtlpriv->sec.key_buf[idx], 0,
+				       MAX_KEY_LEN);
+				rtlpriv->sec.key_len[idx] = 0;
+			}
+		}
+
+	} else {
+		switch (enc_algo) {
+		case WEP40_ENCRYPTION:
+			enc_algo = CAM_WEP40;
+			break;
+		case WEP104_ENCRYPTION:
+			enc_algo = CAM_WEP104;
+			break;
+		case TKIP_ENCRYPTION:
+			enc_algo = CAM_TKIP;
+			break;
+		case AESCCMP_ENCRYPTION:
+			enc_algo = CAM_AES;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("switch case "
+					"not process\n"));
+			enc_algo = CAM_TKIP;
+			break;
+		}
+
+		if (is_wepkey || rtlpriv->sec.use_defaultkey) {
+			macaddr = cam_const_addr[key_index];
+			entry_id = key_index;
+		} else {
+			if (is_group) {
+				macaddr = cam_const_broad;
+				entry_id = key_index;
+			} else {
+				key_index = PAIRWISE_KEYIDX;
+				entry_id = CAM_PAIRWISE_KEY_POSITION;
+				is_pairwise = true;
+			}
+		}
+
+		if (rtlpriv->sec.key_len[key_index] == 0) {
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("delete one entry\n"));
+			rtl_cam_delete_one_entry(hw, p_macaddr, entry_id);
+		} else {
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 ("The insert KEY length is %d\n",
+				  rtlpriv->sec.key_len[PAIRWISE_KEYIDX]));
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD,
+				 ("The insert KEY  is %x %x\n",
+				  rtlpriv->sec.key_buf[0][0],
+				  rtlpriv->sec.key_buf[0][1]));
+
+			RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+				 ("add one entry\n"));
+			if (is_pairwise) {
+				RT_PRINT_DATA(rtlpriv, COMP_SEC, DBG_LOUD,
+					      "Pairwiase Key content :",
+					      rtlpriv->sec.pairwise_key,
+					      rtlpriv->sec.
+					      key_len[PAIRWISE_KEYIDX]);
+
+				RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+					 ("set Pairwiase key\n"));
+
+				rtl_cam_add_one_entry(hw, macaddr, key_index,
+						      entry_id, enc_algo,
+						      CAM_CONFIG_NO_USEDK,
+						      rtlpriv->sec.
+						      key_buf[key_index]);
+			} else {
+				RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG,
+					 ("set group key\n"));
+
+				if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+					rtl_cam_add_one_entry(hw,
+						rtlefuse->dev_addr,
+						PAIRWISE_KEYIDX,
+						CAM_PAIRWISE_KEY_POSITION,
+						enc_algo,
+						CAM_CONFIG_NO_USEDK,
+						rtlpriv->sec.key_buf
+						[entry_id]);
+				}
+
+				rtl_cam_add_one_entry(hw, macaddr, key_index,
+						entry_id, enc_algo,
+						CAM_CONFIG_NO_USEDK,
+						rtlpriv->sec.key_buf[entry_id]);
+			}
+
+		}
+	}
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h
new file mode 100644
index 00000000000..305c819c8c7
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.h
@@ -0,0 +1,57 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92CE_HW_H__
+#define __RTL92CE_HW_H__
+
+void rtl92ce_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
+void rtl92ce_read_eeprom_info(struct ieee80211_hw *hw);
+void rtl92ce_interrupt_recognized(struct ieee80211_hw *hw,
+				  u32 *p_inta, u32 *p_intb);
+int rtl92ce_hw_init(struct ieee80211_hw *hw);
+void rtl92ce_card_disable(struct ieee80211_hw *hw);
+void rtl92ce_enable_interrupt(struct ieee80211_hw *hw);
+void rtl92ce_disable_interrupt(struct ieee80211_hw *hw);
+int rtl92ce_set_network_type(struct ieee80211_hw *hw, enum nl80211_iftype type);
+void rtl92ce_set_qos(struct ieee80211_hw *hw, int aci);
+void rtl92ce_set_beacon_related_registers(struct ieee80211_hw *hw);
+void rtl92ce_set_beacon_interval(struct ieee80211_hw *hw);
+void rtl92ce_update_interrupt_mask(struct ieee80211_hw *hw,
+				   u32 add_msr, u32 rm_msr);
+void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val);
+void rtl92ce_update_hal_rate_table(struct ieee80211_hw *hw);
+void rtl92ce_update_hal_rate_mask(struct ieee80211_hw *hw, u8 rssi_level);
+void rtl92ce_update_channel_access_setting(struct ieee80211_hw *hw);
+bool rtl92ce_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 *valid);
+void rtl92ce_enable_hw_security_config(struct ieee80211_hw *hw);
+void rtl92ce_set_key(struct ieee80211_hw *hw, u32 key_index,
+		     u8 *p_macaddr, bool is_group, u8 enc_algo,
+		     bool is_wepkey, bool clear_all);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/led.c b/drivers/net/wireless/rtlwifi/rtl8192ce/led.c
new file mode 100644
index 00000000000..78a0569208e
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/led.c
@@ -0,0 +1,144 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "reg.h"
+#include "led.h"
+
+void rtl92ce_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+	u8 ledcfg;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
+		 ("LedAddr:%X ledpin=%d\n", REG_LEDCFG2, pled->ledpin));
+
+	ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
+
+	switch (pled->ledpin) {
+	case LED_PIN_GPIO0:
+		break;
+	case LED_PIN_LED0:
+		rtl_write_byte(rtlpriv,
+			       REG_LEDCFG2, (ledcfg & 0xf0) | BIT(5) | BIT(6));
+		break;
+	case LED_PIN_LED1:
+		rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+	pled->b_ledon = true;
+}
+
+void rtl92ce_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	u8 ledcfg;
+
+	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD,
+		 ("LedAddr:%X ledpin=%d\n", REG_LEDCFG2, pled->ledpin));
+
+	ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
+
+	switch (pled->ledpin) {
+	case LED_PIN_GPIO0:
+		break;
+	case LED_PIN_LED0:
+		ledcfg &= 0xf0;
+		if (pcipriv->ledctl.bled_opendrain == true)
+			rtl_write_byte(rtlpriv, REG_LEDCFG2,
+				       (ledcfg | BIT(1) | BIT(5) | BIT(6)));
+		else
+			rtl_write_byte(rtlpriv, REG_LEDCFG2,
+				       (ledcfg | BIT(3) | BIT(5) | BIT(6)));
+		break;
+	case LED_PIN_LED1:
+		ledcfg &= 0x0f;
+		rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+	pled->b_ledon = false;
+}
+
+void rtl92ce_init_sw_leds(struct ieee80211_hw *hw)
+{
+}
+
+void rtl92ce_deinit_sw_leds(struct ieee80211_hw *hw)
+{
+}
+
+void _rtl92ce_sw_led_control(struct ieee80211_hw *hw,
+				    enum led_ctl_mode ledaction)
+{
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_led *pLed0 = &(pcipriv->ledctl.sw_led0);
+	switch (ledaction) {
+	case LED_CTL_POWER_ON:
+	case LED_CTL_LINK:
+	case LED_CTL_NO_LINK:
+		rtl92ce_sw_led_on(hw, pLed0);
+		break;
+	case LED_CTL_POWER_OFF:
+		rtl92ce_sw_led_off(hw, pLed0);
+		break;
+	default:
+		break;
+	}
+}
+
+void rtl92ce_led_control(struct ieee80211_hw *hw,
+			enum led_ctl_mode ledaction)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) &&
+	    (ledaction == LED_CTL_TX ||
+	     ledaction == LED_CTL_RX ||
+	     ledaction == LED_CTL_SITE_SURVEY ||
+	     ledaction == LED_CTL_LINK ||
+	     ledaction == LED_CTL_NO_LINK ||
+	     ledaction == LED_CTL_START_TO_LINK ||
+	     ledaction == LED_CTL_POWER_ON)) {
+		return;
+	}
+	RT_TRACE(rtlpriv, COMP_LED, DBG_LOUD, ("ledaction %d,\n",
+				ledaction));
+	_rtl92ce_sw_led_control(hw, ledaction);
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/led.h b/drivers/net/wireless/rtlwifi/rtl8192ce/led.h
new file mode 100644
index 00000000000..10da3018f4b
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/led.h
@@ -0,0 +1,41 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92CE_LED_H__
+#define __RTL92CE_LED_H__
+
+void rtl92ce_init_sw_leds(struct ieee80211_hw *hw);
+void rtl92ce_deinit_sw_leds(struct ieee80211_hw *hw);
+void rtl92ce_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled);
+void rtl92ce_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled);
+void rtl92ce_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction);
+void _rtl92ce_sw_led_control(struct ieee80211_hw *hw,
+				    enum led_ctl_mode ledaction);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
new file mode 100644
index 00000000000..45044117139
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
@@ -0,0 +1,2676 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../ps.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+#include "table.h"
+
+static u32 _rtl92c_phy_fw_rf_serial_read(struct ieee80211_hw *hw,
+					 enum radio_path rfpath, u32 offset);
+static void _rtl92c_phy_fw_rf_serial_write(struct ieee80211_hw *hw,
+					   enum radio_path rfpath, u32 offset,
+					   u32 data);
+static u32 _rtl92c_phy_rf_serial_read(struct ieee80211_hw *hw,
+				      enum radio_path rfpath, u32 offset);
+static void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw,
+					enum radio_path rfpath, u32 offset,
+					u32 data);
+static u32 _rtl92c_phy_calculate_bit_shift(u32 bitmask);
+static bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw);
+static bool _rtl92c_phy_config_mac_with_headerfile(struct ieee80211_hw *hw);
+static bool _rtl92c_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
+						  u8 configtype);
+static bool _rtl92c_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
+						    u8 configtype);
+static void _rtl92c_phy_init_bb_rf_register_definition(struct ieee80211_hw *hw);
+static bool _rtl92c_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
+					     u32 cmdtableidx, u32 cmdtablesz,
+					     enum swchnlcmd_id cmdid, u32 para1,
+					     u32 para2, u32 msdelay);
+static bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
+					     u8 channel, u8 *stage, u8 *step,
+					     u32 *delay);
+static u8 _rtl92c_phy_dbm_to_txpwr_Idx(struct ieee80211_hw *hw,
+				       enum wireless_mode wirelessmode,
+				       long power_indbm);
+static bool _rtl92c_phy_config_rf_external_pa(struct ieee80211_hw *hw,
+					      enum radio_path rfpath);
+static long _rtl92c_phy_txpwr_idx_to_dbm(struct ieee80211_hw *hw,
+					 enum wireless_mode wirelessmode,
+					 u8 txpwridx);
+u32 rtl92c_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 returnvalue, originalvalue, bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), "
+					       "bitmask(%#x)\n", regaddr,
+					       bitmask));
+	originalvalue = rtl_read_dword(rtlpriv, regaddr);
+	bitshift = _rtl92c_phy_calculate_bit_shift(bitmask);
+	returnvalue = (originalvalue & bitmask) >> bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("BBR MASK=0x%x "
+					       "Addr[0x%x]=0x%x\n", bitmask,
+					       regaddr, originalvalue));
+
+	return returnvalue;
+
+}
+
+void rtl92c_phy_set_bb_reg(struct ieee80211_hw *hw,
+			   u32 regaddr, u32 bitmask, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 originalvalue, bitshift;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+					       " data(%#x)\n", regaddr, bitmask,
+					       data));
+
+	if (bitmask != MASKDWORD) {
+		originalvalue = rtl_read_dword(rtlpriv, regaddr);
+		bitshift = _rtl92c_phy_calculate_bit_shift(bitmask);
+		data = ((originalvalue & (~bitmask)) | (data << bitshift));
+	}
+
+	rtl_write_dword(rtlpriv, regaddr, data);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+					       " data(%#x)\n", regaddr, bitmask,
+					       data));
+
+}
+
+u32 rtl92c_phy_query_rf_reg(struct ieee80211_hw *hw,
+			    enum radio_path rfpath, u32 regaddr, u32 bitmask)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 original_value, readback_value, bitshift;
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	unsigned long flags;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), "
+					       "rfpath(%#x), bitmask(%#x)\n",
+					       regaddr, rfpath, bitmask));
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+	if (rtlphy->rf_mode != RF_OP_BY_FW) {
+		original_value = _rtl92c_phy_rf_serial_read(hw,
+							    rfpath, regaddr);
+	} else {
+		original_value = _rtl92c_phy_fw_rf_serial_read(hw,
+							       rfpath, regaddr);
+	}
+
+	bitshift = _rtl92c_phy_calculate_bit_shift(bitmask);
+	readback_value = (original_value & bitmask) >> bitshift;
+
+	spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 ("regaddr(%#x), rfpath(%#x), "
+		  "bitmask(%#x), original_value(%#x)\n",
+		  regaddr, rfpath, bitmask, original_value));
+
+	return readback_value;
+}
+
+void rtl92c_phy_set_rf_reg(struct ieee80211_hw *hw,
+			   enum radio_path rfpath,
+			   u32 regaddr, u32 bitmask, u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 original_value, bitshift;
+	unsigned long flags;
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+		 ("regaddr(%#x), bitmask(%#x), data(%#x), rfpath(%#x)\n",
+		  regaddr, bitmask, data, rfpath));
+
+	spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+	if (rtlphy->rf_mode != RF_OP_BY_FW) {
+		if (bitmask != RFREG_OFFSET_MASK) {
+			original_value = _rtl92c_phy_rf_serial_read(hw,
+								    rfpath,
+								    regaddr);
+			bitshift = _rtl92c_phy_calculate_bit_shift(bitmask);
+			data =
+			    ((original_value & (~bitmask)) |
+			     (data << bitshift));
+		}
+
+		_rtl92c_phy_rf_serial_write(hw, rfpath, regaddr, data);
+	} else {
+		if (bitmask != RFREG_OFFSET_MASK) {
+			original_value = _rtl92c_phy_fw_rf_serial_read(hw,
+								       rfpath,
+								       regaddr);
+			bitshift = _rtl92c_phy_calculate_bit_shift(bitmask);
+			data =
+			    ((original_value & (~bitmask)) |
+			     (data << bitshift));
+		}
+		_rtl92c_phy_fw_rf_serial_write(hw, rfpath, regaddr, data);
+	}
+
+	spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), "
+					       "bitmask(%#x), data(%#x), "
+					       "rfpath(%#x)\n", regaddr,
+					       bitmask, data, rfpath));
+}
+
+static u32 _rtl92c_phy_fw_rf_serial_read(struct ieee80211_hw *hw,
+					 enum radio_path rfpath, u32 offset)
+{
+	RT_ASSERT(false, ("deprecated!\n"));
+	return 0;
+}
+
+static void _rtl92c_phy_fw_rf_serial_write(struct ieee80211_hw *hw,
+					   enum radio_path rfpath, u32 offset,
+					   u32 data)
+{
+	RT_ASSERT(false, ("deprecated!\n"));
+}
+
+static u32 _rtl92c_phy_rf_serial_read(struct ieee80211_hw *hw,
+				      enum radio_path rfpath, u32 offset)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+	u32 newoffset;
+	u32 tmplong, tmplong2;
+	u8 rfpi_enable = 0;
+	u32 retvalue;
+
+	offset &= 0x3f;
+	newoffset = offset;
+	if (RT_CANNOT_IO(hw)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("return all one\n"));
+		return 0xFFFFFFFF;
+	}
+	tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
+	if (rfpath == RF90_PATH_A)
+		tmplong2 = tmplong;
+	else
+		tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD);
+	tmplong2 = (tmplong2 & (~BLSSIREADADDRESS)) |
+	    (newoffset << 23) | BLSSIREADEDGE;
+	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
+		      tmplong & (~BLSSIREADEDGE));
+	mdelay(1);
+	rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2);
+	mdelay(1);
+	rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
+		      tmplong | BLSSIREADEDGE);
+	mdelay(1);
+	if (rfpath == RF90_PATH_A)
+		rfpi_enable = (u8) rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER1,
+						 BIT(8));
+	else if (rfpath == RF90_PATH_B)
+		rfpi_enable = (u8) rtl_get_bbreg(hw, RFPGA0_XB_HSSIPARAMETER1,
+						 BIT(8));
+	if (rfpi_enable)
+		retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readbackpi,
+					 BLSSIREADBACKDATA);
+	else
+		retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+					 BLSSIREADBACKDATA);
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFR-%d Addr[0x%x]=0x%x\n",
+					       rfpath, pphyreg->rflssi_readback,
+					       retvalue));
+	return retvalue;
+}
+
+static void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw,
+					enum radio_path rfpath, u32 offset,
+					u32 data)
+{
+	u32 data_and_addr;
+	u32 newoffset;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+
+	if (RT_CANNOT_IO(hw)) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("stop\n"));
+		return;
+	}
+	offset &= 0x3f;
+	newoffset = offset;
+	data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff;
+	rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr);
+	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFW-%d Addr[0x%x]=0x%x\n",
+					       rfpath, pphyreg->rf3wire_offset,
+					       data_and_addr));
+}
+
+static u32 _rtl92c_phy_calculate_bit_shift(u32 bitmask)
+{
+	u32 i;
+
+	for (i = 0; i <= 31; i++) {
+		if (((bitmask >> i) & 0x1) == 1)
+			break;
+	}
+	return i;
+}
+
+static void _rtl92c_phy_bb_config_1t(struct ieee80211_hw *hw)
+{
+	rtl_set_bbreg(hw, RFPGA0_TXINFO, 0x3, 0x2);
+	rtl_set_bbreg(hw, RFPGA1_TXINFO, 0x300033, 0x200022);
+	rtl_set_bbreg(hw, RCCK0_AFESETTING, MASKBYTE3, 0x45);
+	rtl_set_bbreg(hw, ROFDM0_TRXPATHENABLE, MASKBYTE0, 0x23);
+	rtl_set_bbreg(hw, ROFDM0_AGCPARAMETER1, 0x30, 0x1);
+	rtl_set_bbreg(hw, 0xe74, 0x0c000000, 0x2);
+	rtl_set_bbreg(hw, 0xe78, 0x0c000000, 0x2);
+	rtl_set_bbreg(hw, 0xe7c, 0x0c000000, 0x2);
+	rtl_set_bbreg(hw, 0xe80, 0x0c000000, 0x2);
+	rtl_set_bbreg(hw, 0xe88, 0x0c000000, 0x2);
+}
+
+bool rtl92c_phy_mac_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	bool is92c = IS_92C_SERIAL(rtlhal->version);
+	bool rtstatus = _rtl92c_phy_config_mac_with_headerfile(hw);
+
+	if (is92c)
+		rtl_write_byte(rtlpriv, 0x14, 0x71);
+	return rtstatus;
+}
+
+bool rtl92c_phy_bb_config(struct ieee80211_hw *hw)
+{
+	bool rtstatus = true;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u16 regval;
+	u32 regvaldw;
+	u8 b_reg_hwparafile = 1;
+
+	_rtl92c_phy_init_bb_rf_register_definition(hw);
+	regval = rtl_read_word(rtlpriv, REG_SYS_FUNC_EN);
+	rtl_write_word(rtlpriv, REG_SYS_FUNC_EN,
+		       regval | BIT(13) | BIT(0) | BIT(1));
+	rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL, 0x83);
+	rtl_write_byte(rtlpriv, REG_AFE_PLL_CTRL + 1, 0xdb);
+	rtl_write_byte(rtlpriv, REG_RF_CTRL, RF_EN | RF_RSTB | RF_SDMRSTB);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN,
+		       FEN_PPLL | FEN_PCIEA | FEN_DIO_PCIE |
+		       FEN_BB_GLB_RSTn | FEN_BBRSTB);
+	rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL + 1, 0x80);
+	regvaldw = rtl_read_dword(rtlpriv, REG_LEDCFG0);
+	rtl_write_dword(rtlpriv, REG_LEDCFG0, regvaldw | BIT(23));
+	if (b_reg_hwparafile == 1)
+		rtstatus = _rtl92c_phy_bb8192c_config_parafile(hw);
+	return rtstatus;
+}
+
+bool rtl92c_phy_rf_config(struct ieee80211_hw *hw)
+{
+	return rtl92c_phy_rf6052_config(hw);
+}
+
+static bool _rtl92c_phy_bb8192c_config_parafile(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	bool rtstatus;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("==>\n"));
+	rtstatus = _rtl92c_phy_config_bb_with_headerfile(hw,
+						 BASEBAND_CONFIG_PHY_REG);
+	if (rtstatus != true) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Write BB Reg Fail!!"));
+		return false;
+	}
+	if (rtlphy->rf_type == RF_1T2R) {
+		_rtl92c_phy_bb_config_1t(hw);
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("Config to 1T!!\n"));
+	}
+	if (rtlefuse->autoload_failflag == false) {
+		rtlphy->pwrgroup_cnt = 0;
+		rtstatus = _rtl92c_phy_config_bb_with_pgheaderfile(hw,
+						   BASEBAND_CONFIG_PHY_REG);
+	}
+	if (rtstatus != true) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("BB_PG Reg Fail!!"));
+		return false;
+	}
+	rtstatus = _rtl92c_phy_config_bb_with_headerfile(hw,
+						 BASEBAND_CONFIG_AGC_TAB);
+	if (rtstatus != true) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("AGC Table Fail\n"));
+		return false;
+	}
+	rtlphy->bcck_high_power = (bool) (rtl_get_bbreg(hw,
+						RFPGA0_XA_HSSIPARAMETER2,
+						0x200));
+	return true;
+}
+
+static bool _rtl92c_phy_config_mac_with_headerfile(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 i;
+	u32 arraylength;
+	u32 *ptrarray;
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("Read Rtl819XMACPHY_Array\n"));
+	arraylength = MAC_2T_ARRAYLENGTH;
+	ptrarray = RTL8192CEMAC_2T_ARRAY;
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+		 ("Img:RTL8192CEMAC_2T_ARRAY\n"));
+	for (i = 0; i < arraylength; i = i + 2)
+		rtl_write_byte(rtlpriv, ptrarray[i], (u8) ptrarray[i + 1]);
+	return true;
+}
+
+void rtl92c_phy_config_bb_external_pa(struct ieee80211_hw *hw)
+{
+}
+
+static bool _rtl92c_phy_config_bb_with_headerfile(struct ieee80211_hw *hw,
+						  u8 configtype)
+{
+	int i;
+	u32 *phy_regarray_table;
+	u32 *agctab_array_table;
+	u16 phy_reg_arraylen, agctab_arraylen;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (IS_92C_SERIAL(rtlhal->version)) {
+		agctab_arraylen = AGCTAB_2TARRAYLENGTH;
+		agctab_array_table = RTL8192CEAGCTAB_2TARRAY;
+		phy_reg_arraylen = PHY_REG_2TARRAY_LENGTH;
+		phy_regarray_table = RTL8192CEPHY_REG_2TARRAY;
+	} else {
+		agctab_arraylen = AGCTAB_1TARRAYLENGTH;
+		agctab_array_table = RTL8192CEAGCTAB_1TARRAY;
+		phy_reg_arraylen = PHY_REG_1TARRAY_LENGTH;
+		phy_regarray_table = RTL8192CEPHY_REG_1TARRAY;
+	}
+	if (configtype == BASEBAND_CONFIG_PHY_REG) {
+		for (i = 0; i < phy_reg_arraylen; i = i + 2) {
+			if (phy_regarray_table[i] == 0xfe)
+				mdelay(50);
+			else if (phy_regarray_table[i] == 0xfd)
+				mdelay(5);
+			else if (phy_regarray_table[i] == 0xfc)
+				mdelay(1);
+			else if (phy_regarray_table[i] == 0xfb)
+				udelay(50);
+			else if (phy_regarray_table[i] == 0xfa)
+				udelay(5);
+			else if (phy_regarray_table[i] == 0xf9)
+				udelay(1);
+			rtl_set_bbreg(hw, phy_regarray_table[i], MASKDWORD,
+				      phy_regarray_table[i + 1]);
+			udelay(1);
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+				 ("The phy_regarray_table[0] is %x"
+				  " Rtl819XPHY_REGArray[1] is %x\n",
+				  phy_regarray_table[i],
+				  phy_regarray_table[i + 1]));
+		}
+		rtl92c_phy_config_bb_external_pa(hw);
+	} else if (configtype == BASEBAND_CONFIG_AGC_TAB) {
+		for (i = 0; i < agctab_arraylen; i = i + 2) {
+			rtl_set_bbreg(hw, agctab_array_table[i], MASKDWORD,
+				      agctab_array_table[i + 1]);
+			udelay(1);
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+				 ("The agctab_array_table[0] is "
+				  "%x Rtl819XPHY_REGArray[1] is %x\n",
+				  agctab_array_table[i],
+				  agctab_array_table[i + 1]));
+		}
+	}
+	return true;
+}
+
+static void _rtl92c_store_pwrIndex_diffrate_offset(struct ieee80211_hw *hw,
+						   u32 regaddr, u32 bitmask,
+						   u32 data)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	if (regaddr == RTXAGC_A_RATE18_06) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][0] =
+		    data;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][0] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][0]));
+	}
+	if (regaddr == RTXAGC_A_RATE54_24) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][1] =
+		    data;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][1] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][1]));
+	}
+	if (regaddr == RTXAGC_A_CCK1_MCS32) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][6] =
+		    data;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][6] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][6]));
+	}
+	if (regaddr == RTXAGC_B_CCK11_A_CCK2_11 && bitmask == 0xffffff00) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][7] =
+		    data;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][7] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][7]));
+	}
+	if (regaddr == RTXAGC_A_MCS03_MCS00) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][2] =
+		    data;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][2] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][2]));
+	}
+	if (regaddr == RTXAGC_A_MCS07_MCS04) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][3] =
+		    data;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][3] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][3]));
+	}
+	if (regaddr == RTXAGC_A_MCS11_MCS08) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][4] =
+		    data;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][4] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][4]));
+	}
+	if (regaddr == RTXAGC_A_MCS15_MCS12) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][5] =
+		    data;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][5] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][5]));
+	}
+	if (regaddr == RTXAGC_B_RATE18_06) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][8] =
+		    data;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][8] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][8]));
+	}
+	if (regaddr == RTXAGC_B_RATE54_24) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][9] =
+		    data;
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][9] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][9]));
+	}
+
+	if (regaddr == RTXAGC_B_CCK1_55_MCS32) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][14] =
+		    data;
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][14] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][14]));
+	}
+
+	if (regaddr == RTXAGC_B_CCK11_A_CCK2_11 && bitmask == 0x000000ff) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][15] =
+		    data;
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][15] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][15]));
+	}
+
+	if (regaddr == RTXAGC_B_MCS03_MCS00) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][10] =
+		    data;
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][10] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][10]));
+	}
+
+	if (regaddr == RTXAGC_B_MCS07_MCS04) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][11] =
+		    data;
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][11] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][11]));
+	}
+
+	if (regaddr == RTXAGC_B_MCS11_MCS08) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][12] =
+		    data;
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][12] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][12]));
+	}
+
+	if (regaddr == RTXAGC_B_MCS15_MCS12) {
+		rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][13] =
+		    data;
+
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("MCSTxPowerLevelOriginalOffset[%d][13] = 0x%x\n",
+			  rtlphy->pwrgroup_cnt,
+			  rtlphy->mcs_txpwrlevel_origoffset[rtlphy->
+							    pwrgroup_cnt][13]));
+
+		rtlphy->pwrgroup_cnt++;
+	}
+}
+
+static bool _rtl92c_phy_config_bb_with_pgheaderfile(struct ieee80211_hw *hw,
+						    u8 configtype)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	int i;
+	u32 *phy_regarray_table_pg;
+	u16 phy_regarray_pg_len;
+
+	phy_regarray_pg_len = PHY_REG_ARRAY_PGLENGTH;
+	phy_regarray_table_pg = RTL8192CEPHY_REG_ARRAY_PG;
+
+	if (configtype == BASEBAND_CONFIG_PHY_REG) {
+		for (i = 0; i < phy_regarray_pg_len; i = i + 3) {
+			if (phy_regarray_table_pg[i] == 0xfe)
+				mdelay(50);
+			else if (phy_regarray_table_pg[i] == 0xfd)
+				mdelay(5);
+			else if (phy_regarray_table_pg[i] == 0xfc)
+				mdelay(1);
+			else if (phy_regarray_table_pg[i] == 0xfb)
+				udelay(50);
+			else if (phy_regarray_table_pg[i] == 0xfa)
+				udelay(5);
+			else if (phy_regarray_table_pg[i] == 0xf9)
+				udelay(1);
+
+			_rtl92c_store_pwrIndex_diffrate_offset(hw,
+					       phy_regarray_table_pg[i],
+					       phy_regarray_table_pg[i + 1],
+					       phy_regarray_table_pg[i + 2]);
+		}
+	} else {
+
+		RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+			 ("configtype != BaseBand_Config_PHY_REG\n"));
+	}
+	return true;
+}
+
+static bool _rtl92c_phy_config_rf_external_pa(struct ieee80211_hw *hw,
+					      enum radio_path rfpath)
+{
+	return true;
+}
+
+bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
+					  enum radio_path rfpath)
+{
+
+	int i;
+	bool rtstatus = true;
+	u32 *radioa_array_table;
+	u32 *radiob_array_table;
+	u16 radioa_arraylen, radiob_arraylen;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (IS_92C_SERIAL(rtlhal->version)) {
+		radioa_arraylen = RADIOA_2TARRAYLENGTH;
+		radioa_array_table = RTL8192CERADIOA_2TARRAY;
+		radiob_arraylen = RADIOB_2TARRAYLENGTH;
+		radiob_array_table = RTL8192CE_RADIOB_2TARRAY;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Radio_A:RTL8192CERADIOA_2TARRAY\n"));
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Radio_B:RTL8192CE_RADIOB_2TARRAY\n"));
+	} else {
+		radioa_arraylen = RADIOA_1TARRAYLENGTH;
+		radioa_array_table = RTL8192CE_RADIOA_1TARRAY;
+		radiob_arraylen = RADIOB_1TARRAYLENGTH;
+		radiob_array_table = RTL8192CE_RADIOB_1TARRAY;
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Radio_A:RTL8192CE_RADIOA_1TARRAY\n"));
+		RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+			 ("Radio_B:RTL8192CE_RADIOB_1TARRAY\n"));
+	}
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("Radio No %x\n", rfpath));
+	rtstatus = true;
+	switch (rfpath) {
+	case RF90_PATH_A:
+		for (i = 0; i < radioa_arraylen; i = i + 2) {
+			if (radioa_array_table[i] == 0xfe)
+				mdelay(50);
+			else if (radioa_array_table[i] == 0xfd)
+				mdelay(5);
+			else if (radioa_array_table[i] == 0xfc)
+				mdelay(1);
+			else if (radioa_array_table[i] == 0xfb)
+				udelay(50);
+			else if (radioa_array_table[i] == 0xfa)
+				udelay(5);
+			else if (radioa_array_table[i] == 0xf9)
+				udelay(1);
+			else {
+				rtl_set_rfreg(hw, rfpath, radioa_array_table[i],
+					      RFREG_OFFSET_MASK,
+					      radioa_array_table[i + 1]);
+				udelay(1);
+			}
+		}
+		_rtl92c_phy_config_rf_external_pa(hw, rfpath);
+		break;
+	case RF90_PATH_B:
+		for (i = 0; i < radiob_arraylen; i = i + 2) {
+			if (radiob_array_table[i] == 0xfe) {
+				mdelay(50);
+			} else if (radiob_array_table[i] == 0xfd)
+				mdelay(5);
+			else if (radiob_array_table[i] == 0xfc)
+				mdelay(1);
+			else if (radiob_array_table[i] == 0xfb)
+				udelay(50);
+			else if (radiob_array_table[i] == 0xfa)
+				udelay(5);
+			else if (radiob_array_table[i] == 0xf9)
+				udelay(1);
+			else {
+				rtl_set_rfreg(hw, rfpath, radiob_array_table[i],
+					      RFREG_OFFSET_MASK,
+					      radiob_array_table[i + 1]);
+				udelay(1);
+			}
+		}
+		break;
+	case RF90_PATH_C:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	case RF90_PATH_D:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+	return true;
+}
+
+void rtl92c_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	rtlphy->default_initialgain[0] =
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[1] =
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[2] =
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XCAGCCORE1, MASKBYTE0);
+	rtlphy->default_initialgain[3] =
+	    (u8) rtl_get_bbreg(hw, ROFDM0_XDAGCCORE1, MASKBYTE0);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+		 ("Default initial gain (c50=0x%x, "
+		  "c58=0x%x, c60=0x%x, c68=0x%x\n",
+		  rtlphy->default_initialgain[0],
+		  rtlphy->default_initialgain[1],
+		  rtlphy->default_initialgain[2],
+		  rtlphy->default_initialgain[3]));
+
+	rtlphy->framesync = (u8) rtl_get_bbreg(hw,
+					       ROFDM0_RXDETECTOR3, MASKBYTE0);
+	rtlphy->framesync_c34 = rtl_get_bbreg(hw,
+					      ROFDM0_RXDETECTOR2, MASKDWORD);
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+		 ("Default framesync (0x%x) = 0x%x\n",
+		  ROFDM0_RXDETECTOR3, rtlphy->framesync));
+}
+
+static void _rtl92c_phy_init_bb_rf_register_definition(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_C].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+	rtlphy->phyreg_def[RF90_PATH_D].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfo = RFPGA0_XA_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfo = RFPGA0_XB_RFINTERFACEOE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfintfe = RFPGA0_XA_RFINTERFACEOE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfintfe = RFPGA0_XB_RFINTERFACEOE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset =
+	    RFPGA0_XA_LSSIPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset =
+	    RFPGA0_XB_LSSIPARAMETER;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rflssi_select = rFPGA0_XAB_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_B].rflssi_select = rFPGA0_XAB_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_C].rflssi_select = rFPGA0_XCD_RFPARAMETER;
+	rtlphy->phyreg_def[RF90_PATH_D].rflssi_select = rFPGA0_XCD_RFPARAMETER;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1;
+	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 = RFPGA0_XA_HSSIPARAMETER2;
+	rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 = RFPGA0_XB_HSSIPARAMETER2;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfswitch_control =
+	    RFPGA0_XAB_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_B].rfswitch_control =
+	    RFPGA0_XAB_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_C].rfswitch_control =
+	    RFPGA0_XCD_SWITCHCONTROL;
+	rtlphy->phyreg_def[RF90_PATH_D].rfswitch_control =
+	    RFPGA0_XCD_SWITCHCONTROL;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfagc_control1 = ROFDM0_XAAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_B].rfagc_control1 = ROFDM0_XBAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_C].rfagc_control1 = ROFDM0_XCAGCCORE1;
+	rtlphy->phyreg_def[RF90_PATH_D].rfagc_control1 = ROFDM0_XDAGCCORE1;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfagc_control2 = ROFDM0_XAAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_B].rfagc_control2 = ROFDM0_XBAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_C].rfagc_control2 = ROFDM0_XCAGCCORE2;
+	rtlphy->phyreg_def[RF90_PATH_D].rfagc_control2 = ROFDM0_XDAGCCORE2;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfrxiq_imbalance =
+	    ROFDM0_XARXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfrxiq_imbalance =
+	    ROFDM0_XBRXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfrxiq_imbalance =
+	    ROFDM0_XCRXIQIMBANLANCE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfrxiq_imbalance =
+	    ROFDM0_XDRXIQIMBALANCE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rfrx_afe = ROFDM0_XARXAFE;
+	rtlphy->phyreg_def[RF90_PATH_B].rfrx_afe = ROFDM0_XBRXAFE;
+	rtlphy->phyreg_def[RF90_PATH_C].rfrx_afe = ROFDM0_XCRXAFE;
+	rtlphy->phyreg_def[RF90_PATH_D].rfrx_afe = ROFDM0_XDRXAFE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rftxiq_imbalance =
+	    ROFDM0_XATXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftxiq_imbalance =
+	    ROFDM0_XBTXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftxiq_imbalance =
+	    ROFDM0_XCTXIQIMBALANCE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftxiq_imbalance =
+	    ROFDM0_XDTXIQIMBALANCE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rftx_afe = ROFDM0_XATXAFE;
+	rtlphy->phyreg_def[RF90_PATH_B].rftx_afe = ROFDM0_XBTXAFE;
+	rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE;
+	rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rflssi_readback =
+	    RFPGA0_XA_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_B].rflssi_readback =
+	    RFPGA0_XB_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_C].rflssi_readback =
+	    RFPGA0_XC_LSSIREADBACK;
+	rtlphy->phyreg_def[RF90_PATH_D].rflssi_readback =
+	    RFPGA0_XD_LSSIREADBACK;
+
+	rtlphy->phyreg_def[RF90_PATH_A].rflssi_readbackpi =
+	    TRANSCEIVEA_HSPI_READBACK;
+	rtlphy->phyreg_def[RF90_PATH_B].rflssi_readbackpi =
+	    TRANSCEIVEB_HSPI_READBACK;
+
+}
+
+void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 txpwr_level;
+	long txpwr_dbm;
+
+	txpwr_level = rtlphy->cur_cck_txpwridx;
+	txpwr_dbm = _rtl92c_phy_txpwr_idx_to_dbm(hw,
+						 WIRELESS_MODE_B, txpwr_level);
+	txpwr_level = rtlphy->cur_ofdm24g_txpwridx +
+	    rtlefuse->legacy_ht_txpowerdiff;
+	if (_rtl92c_phy_txpwr_idx_to_dbm(hw,
+					 WIRELESS_MODE_G,
+					 txpwr_level) > txpwr_dbm)
+		txpwr_dbm =
+		    _rtl92c_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_G,
+						 txpwr_level);
+	txpwr_level = rtlphy->cur_ofdm24g_txpwridx;
+	if (_rtl92c_phy_txpwr_idx_to_dbm(hw,
+					 WIRELESS_MODE_N_24G,
+					 txpwr_level) > txpwr_dbm)
+		txpwr_dbm =
+		    _rtl92c_phy_txpwr_idx_to_dbm(hw, WIRELESS_MODE_N_24G,
+						 txpwr_level);
+	*powerlevel = txpwr_dbm;
+}
+
+static void _rtl92c_get_txpower_index(struct ieee80211_hw *hw, u8 channel,
+				      u8 *cckpowerlevel, u8 *ofdmpowerlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 index = (channel - 1);
+
+	cckpowerlevel[RF90_PATH_A] =
+	    rtlefuse->txpwrlevel_cck[RF90_PATH_A][index];
+	cckpowerlevel[RF90_PATH_B] =
+	    rtlefuse->txpwrlevel_cck[RF90_PATH_B][index];
+	if (get_rf_type(rtlphy) == RF_1T2R || get_rf_type(rtlphy) == RF_1T1R) {
+		ofdmpowerlevel[RF90_PATH_A] =
+		    rtlefuse->txpwrlevel_ht40_1s[RF90_PATH_A][index];
+		ofdmpowerlevel[RF90_PATH_B] =
+		    rtlefuse->txpwrlevel_ht40_1s[RF90_PATH_B][index];
+	} else if (get_rf_type(rtlphy) == RF_2T2R) {
+		ofdmpowerlevel[RF90_PATH_A] =
+		    rtlefuse->txpwrlevel_ht40_2s[RF90_PATH_A][index];
+		ofdmpowerlevel[RF90_PATH_B] =
+		    rtlefuse->txpwrlevel_ht40_2s[RF90_PATH_B][index];
+	}
+}
+
+static void _rtl92c_ccxpower_index_check(struct ieee80211_hw *hw,
+					 u8 channel, u8 *cckpowerlevel,
+					 u8 *ofdmpowerlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	rtlphy->cur_cck_txpwridx = cckpowerlevel[0];
+	rtlphy->cur_ofdm24g_txpwridx = ofdmpowerlevel[0];
+}
+
+void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel)
+{
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 cckpowerlevel[2], ofdmpowerlevel[2];
+
+	if (rtlefuse->b_txpwr_fromeprom == false)
+		return;
+	_rtl92c_get_txpower_index(hw, channel,
+				  &cckpowerlevel[0], &ofdmpowerlevel[0]);
+	_rtl92c_ccxpower_index_check(hw,
+				     channel, &cckpowerlevel[0],
+				     &ofdmpowerlevel[0]);
+	rtl92c_phy_rf6052_set_cck_txpower(hw, &cckpowerlevel[0]);
+	rtl92c_phy_rf6052_set_ofdm_txpower(hw, &ofdmpowerlevel[0], channel);
+}
+
+bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw, long power_indbm)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 idx;
+	u8 rf_path;
+
+	u8 ccktxpwridx = _rtl92c_phy_dbm_to_txpwr_Idx(hw,
+						      WIRELESS_MODE_B,
+						      power_indbm);
+	u8 ofdmtxpwridx = _rtl92c_phy_dbm_to_txpwr_Idx(hw,
+						       WIRELESS_MODE_N_24G,
+						       power_indbm);
+	if (ofdmtxpwridx - rtlefuse->legacy_ht_txpowerdiff > 0)
+		ofdmtxpwridx -= rtlefuse->legacy_ht_txpowerdiff;
+	else
+		ofdmtxpwridx = 0;
+	RT_TRACE(rtlpriv, COMP_TXAGC, DBG_TRACE,
+		 ("%lx dBm, ccktxpwridx = %d, ofdmtxpwridx = %d\n",
+		  power_indbm, ccktxpwridx, ofdmtxpwridx));
+	for (idx = 0; idx < 14; idx++) {
+		for (rf_path = 0; rf_path < 2; rf_path++) {
+			rtlefuse->txpwrlevel_cck[rf_path][idx] = ccktxpwridx;
+			rtlefuse->txpwrlevel_ht40_1s[rf_path][idx] =
+			    ofdmtxpwridx;
+			rtlefuse->txpwrlevel_ht40_2s[rf_path][idx] =
+			    ofdmtxpwridx;
+		}
+	}
+	rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel);
+	return true;
+}
+
+void rtl92c_phy_set_beacon_hw_reg(struct ieee80211_hw *hw, u16 beaconinterval)
+{
+}
+
+static u8 _rtl92c_phy_dbm_to_txpwr_Idx(struct ieee80211_hw *hw,
+				       enum wireless_mode wirelessmode,
+				       long power_indbm)
+{
+	u8 txpwridx;
+	long offset;
+
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		offset = -7;
+		break;
+	case WIRELESS_MODE_G:
+	case WIRELESS_MODE_N_24G:
+		offset = -8;
+		break;
+	default:
+		offset = -8;
+		break;
+	}
+
+	if ((power_indbm - offset) > 0)
+		txpwridx = (u8) ((power_indbm - offset) * 2);
+	else
+		txpwridx = 0;
+
+	if (txpwridx > MAX_TXPWR_IDX_NMODE_92S)
+		txpwridx = MAX_TXPWR_IDX_NMODE_92S;
+
+	return txpwridx;
+}
+
+static long _rtl92c_phy_txpwr_idx_to_dbm(struct ieee80211_hw *hw,
+					 enum wireless_mode wirelessmode,
+					 u8 txpwridx)
+{
+	long offset;
+	long pwrout_dbm;
+
+	switch (wirelessmode) {
+	case WIRELESS_MODE_B:
+		offset = -7;
+		break;
+	case WIRELESS_MODE_G:
+	case WIRELESS_MODE_N_24G:
+		offset = -8;
+		break;
+	default:
+		offset = -8;
+		break;
+	}
+	pwrout_dbm = txpwridx / 2 + offset;
+	return pwrout_dbm;
+}
+
+void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	enum io_type iotype;
+
+	if (!is_hal_stop(rtlhal)) {
+		switch (operation) {
+		case SCAN_OPT_BACKUP:
+			iotype = IO_CMD_PAUSE_DM_BY_SCAN;
+			rtlpriv->cfg->ops->set_hw_reg(hw,
+						      HW_VAR_IO_CMD,
+						      (u8 *)&iotype);
+
+			break;
+		case SCAN_OPT_RESTORE:
+			iotype = IO_CMD_RESUME_DM_BY_SCAN;
+			rtlpriv->cfg->ops->set_hw_reg(hw,
+						      HW_VAR_IO_CMD,
+						      (u8 *)&iotype);
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("Unknown Scan Backup operation.\n"));
+			break;
+		}
+	}
+}
+
+void rtl92c_phy_set_bw_mode_callback(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	u8 reg_bw_opmode;
+	u8 reg_prsr_rsc;
+
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE,
+		 ("Switch to %s bandwidth\n",
+		  rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ?
+		  "20MHz" : "40MHz"))
+
+	    if (is_hal_stop(rtlhal))
+		return;
+
+	reg_bw_opmode = rtl_read_byte(rtlpriv, REG_BWOPMODE);
+	reg_prsr_rsc = rtl_read_byte(rtlpriv, REG_RRSR + 2);
+
+	switch (rtlphy->current_chan_bw) {
+	case HT_CHANNEL_WIDTH_20:
+		reg_bw_opmode |= BW_OPMODE_20MHZ;
+		rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
+		break;
+
+	case HT_CHANNEL_WIDTH_20_40:
+		reg_bw_opmode &= ~BW_OPMODE_20MHZ;
+		rtl_write_byte(rtlpriv, REG_BWOPMODE, reg_bw_opmode);
+
+		reg_prsr_rsc =
+		    (reg_prsr_rsc & 0x90) | (mac->cur_40_prime_sc << 5);
+		rtl_write_byte(rtlpriv, REG_RRSR + 2, reg_prsr_rsc);
+		break;
+
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
+		break;
+	}
+
+	switch (rtlphy->current_chan_bw) {
+	case HT_CHANNEL_WIDTH_20:
+		rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0);
+		rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0);
+		rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10), 1);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1);
+		rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1);
+		rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND,
+			      (mac->cur_40_prime_sc >> 1));
+		rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc);
+		rtl_set_bbreg(hw, RFPGA0_ANALOGPARAMETER2, BIT(10), 0);
+		rtl_set_bbreg(hw, 0x818, (BIT(26) | BIT(27)),
+			      (mac->cur_40_prime_sc ==
+			       HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
+		break;
+	}
+	rtl92c_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
+	rtlphy->set_bwmode_inprogress = false;
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+}
+
+void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw,
+			    enum nl80211_channel_type ch_type)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	u8 tmp_bw = rtlphy->current_chan_bw;
+
+	if (rtlphy->set_bwmode_inprogress)
+		return;
+	rtlphy->set_bwmode_inprogress = true;
+	if ((!is_hal_stop(rtlhal)) && !(RT_CANNOT_IO(hw)))
+		rtl92c_phy_set_bw_mode_callback(hw);
+	else {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 ("FALSE driver sleep or unload\n"));
+		rtlphy->set_bwmode_inprogress = false;
+		rtlphy->current_chan_bw = tmp_bw;
+	}
+}
+
+void rtl92c_phy_sw_chnl_callback(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 delay;
+
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE,
+		 ("switch to channel%d\n", rtlphy->current_channel));
+	if (is_hal_stop(rtlhal))
+		return;
+	do {
+		if (!rtlphy->sw_chnl_inprogress)
+			break;
+		if (!_rtl92c_phy_sw_chnl_step_by_step
+		    (hw, rtlphy->current_channel, &rtlphy->sw_chnl_stage,
+		     &rtlphy->sw_chnl_step, &delay)) {
+			if (delay > 0)
+				mdelay(delay);
+			else
+				continue;
+		} else
+			rtlphy->sw_chnl_inprogress = false;
+		break;
+	} while (true);
+	RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+}
+
+u8 rtl92c_phy_sw_chnl(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (rtlphy->sw_chnl_inprogress)
+		return 0;
+	if (rtlphy->set_bwmode_inprogress)
+		return 0;
+	RT_ASSERT((rtlphy->current_channel <= 14),
+		  ("WIRELESS_MODE_G but channel>14"));
+	rtlphy->sw_chnl_inprogress = true;
+	rtlphy->sw_chnl_stage = 0;
+	rtlphy->sw_chnl_step = 0;
+	if (!(is_hal_stop(rtlhal)) && !(RT_CANNOT_IO(hw))) {
+		rtl92c_phy_sw_chnl_callback(hw);
+		RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD,
+			 ("sw_chnl_inprogress false schdule workitem\n"));
+		rtlphy->sw_chnl_inprogress = false;
+	} else {
+		RT_TRACE(rtlpriv, COMP_CHAN, DBG_LOUD,
+			 ("sw_chnl_inprogress false driver sleep or"
+			  " unload\n"));
+		rtlphy->sw_chnl_inprogress = false;
+	}
+	return 1;
+}
+
+static bool _rtl92c_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
+					     u8 channel, u8 *stage, u8 *step,
+					     u32 *delay)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct swchnlcmd precommoncmd[MAX_PRECMD_CNT];
+	u32 precommoncmdcnt;
+	struct swchnlcmd postcommoncmd[MAX_POSTCMD_CNT];
+	u32 postcommoncmdcnt;
+	struct swchnlcmd rfdependcmd[MAX_RFDEPENDCMD_CNT];
+	u32 rfdependcmdcnt;
+	struct swchnlcmd *currentcmd = NULL;
+	u8 rfpath;
+	u8 num_total_rfpath = rtlphy->num_total_rfpath;
+
+	precommoncmdcnt = 0;
+	_rtl92c_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+					 MAX_PRECMD_CNT,
+					 CMDID_SET_TXPOWEROWER_LEVEL, 0, 0, 0);
+	_rtl92c_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+					 MAX_PRECMD_CNT, CMDID_END, 0, 0, 0);
+
+	postcommoncmdcnt = 0;
+
+	_rtl92c_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++,
+					 MAX_POSTCMD_CNT, CMDID_END, 0, 0, 0);
+
+	rfdependcmdcnt = 0;
+
+	RT_ASSERT((channel >= 1 && channel <= 14),
+		  ("illegal channel for Zebra: %d\n", channel));
+
+	_rtl92c_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+					 MAX_RFDEPENDCMD_CNT, CMDID_RF_WRITEREG,
+					 RF_CHNLBW, channel, 10);
+
+	_rtl92c_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+					 MAX_RFDEPENDCMD_CNT, CMDID_END, 0, 0,
+					 0);
+
+	do {
+		switch (*stage) {
+		case 0:
+			currentcmd = &precommoncmd[*step];
+			break;
+		case 1:
+			currentcmd = &rfdependcmd[*step];
+			break;
+		case 2:
+			currentcmd = &postcommoncmd[*step];
+			break;
+		}
+
+		if (currentcmd->cmdid == CMDID_END) {
+			if ((*stage) == 2) {
+				return true;
+			} else {
+				(*stage)++;
+				(*step) = 0;
+				continue;
+			}
+		}
+
+		switch (currentcmd->cmdid) {
+		case CMDID_SET_TXPOWEROWER_LEVEL:
+			rtl92c_phy_set_txpower_level(hw, channel);
+			break;
+		case CMDID_WRITEPORT_ULONG:
+			rtl_write_dword(rtlpriv, currentcmd->para1,
+					currentcmd->para2);
+			break;
+		case CMDID_WRITEPORT_USHORT:
+			rtl_write_word(rtlpriv, currentcmd->para1,
+				       (u16) currentcmd->para2);
+			break;
+		case CMDID_WRITEPORT_UCHAR:
+			rtl_write_byte(rtlpriv, currentcmd->para1,
+				       (u8) currentcmd->para2);
+			break;
+		case CMDID_RF_WRITEREG:
+			for (rfpath = 0; rfpath < num_total_rfpath; rfpath++) {
+				rtlphy->rfreg_chnlval[rfpath] =
+				    ((rtlphy->rfreg_chnlval[rfpath] &
+				      0xfffffc00) | currentcmd->para2);
+
+				rtl_set_rfreg(hw, (enum radio_path)rfpath,
+					      currentcmd->para1,
+					      RFREG_OFFSET_MASK,
+					      rtlphy->rfreg_chnlval[rfpath]);
+			}
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("switch case not process\n"));
+			break;
+		}
+
+		break;
+	} while (true);
+
+	(*delay) = currentcmd->msdelay;
+	(*step)++;
+	return false;
+}
+
+static bool _rtl92c_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
+					     u32 cmdtableidx, u32 cmdtablesz,
+					     enum swchnlcmd_id cmdid,
+					     u32 para1, u32 para2, u32 msdelay)
+{
+	struct swchnlcmd *pcmd;
+
+	if (cmdtable == NULL) {
+		RT_ASSERT(false, ("cmdtable cannot be NULL.\n"));
+		return false;
+	}
+
+	if (cmdtableidx >= cmdtablesz)
+		return false;
+
+	pcmd = cmdtable + cmdtableidx;
+	pcmd->cmdid = cmdid;
+	pcmd->para1 = para1;
+	pcmd->para2 = para2;
+	pcmd->msdelay = msdelay;
+	return true;
+}
+
+bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw, u32 rfpath)
+{
+	return true;
+}
+
+static u8 _rtl92c_phy_path_a_iqk(struct ieee80211_hw *hw, bool config_pathb)
+{
+	u32 reg_eac, reg_e94, reg_e9c, reg_ea4;
+	u8 result = 0x00;
+
+	rtl_set_bbreg(hw, 0xe30, MASKDWORD, 0x10008c1f);
+	rtl_set_bbreg(hw, 0xe34, MASKDWORD, 0x10008c1f);
+	rtl_set_bbreg(hw, 0xe38, MASKDWORD, 0x82140102);
+	rtl_set_bbreg(hw, 0xe3c, MASKDWORD,
+		      config_pathb ? 0x28160202 : 0x28160502);
+
+	if (config_pathb) {
+		rtl_set_bbreg(hw, 0xe50, MASKDWORD, 0x10008c22);
+		rtl_set_bbreg(hw, 0xe54, MASKDWORD, 0x10008c22);
+		rtl_set_bbreg(hw, 0xe58, MASKDWORD, 0x82140102);
+		rtl_set_bbreg(hw, 0xe5c, MASKDWORD, 0x28160202);
+	}
+
+	rtl_set_bbreg(hw, 0xe4c, MASKDWORD, 0x001028d1);
+	rtl_set_bbreg(hw, 0xe48, MASKDWORD, 0xf9000000);
+	rtl_set_bbreg(hw, 0xe48, MASKDWORD, 0xf8000000);
+
+	mdelay(IQK_DELAY_TIME);
+
+	reg_eac = rtl_get_bbreg(hw, 0xeac, MASKDWORD);
+	reg_e94 = rtl_get_bbreg(hw, 0xe94, MASKDWORD);
+	reg_e9c = rtl_get_bbreg(hw, 0xe9c, MASKDWORD);
+	reg_ea4 = rtl_get_bbreg(hw, 0xea4, MASKDWORD);
+
+	if (!(reg_eac & BIT(28)) &&
+	    (((reg_e94 & 0x03FF0000) >> 16) != 0x142) &&
+	    (((reg_e9c & 0x03FF0000) >> 16) != 0x42))
+		result |= 0x01;
+	else
+		return result;
+
+	if (!(reg_eac & BIT(27)) &&
+	    (((reg_ea4 & 0x03FF0000) >> 16) != 0x132) &&
+	    (((reg_eac & 0x03FF0000) >> 16) != 0x36))
+		result |= 0x02;
+	return result;
+}
+
+static u8 _rtl92c_phy_path_b_iqk(struct ieee80211_hw *hw)
+{
+	u32 reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc;
+	u8 result = 0x00;
+
+	rtl_set_bbreg(hw, 0xe60, MASKDWORD, 0x00000002);
+	rtl_set_bbreg(hw, 0xe60, MASKDWORD, 0x00000000);
+	mdelay(IQK_DELAY_TIME);
+	reg_eac = rtl_get_bbreg(hw, 0xeac, MASKDWORD);
+	reg_eb4 = rtl_get_bbreg(hw, 0xeb4, MASKDWORD);
+	reg_ebc = rtl_get_bbreg(hw, 0xebc, MASKDWORD);
+	reg_ec4 = rtl_get_bbreg(hw, 0xec4, MASKDWORD);
+	reg_ecc = rtl_get_bbreg(hw, 0xecc, MASKDWORD);
+	if (!(reg_eac & BIT(31)) &&
+	    (((reg_eb4 & 0x03FF0000) >> 16) != 0x142) &&
+	    (((reg_ebc & 0x03FF0000) >> 16) != 0x42))
+		result |= 0x01;
+	else
+		return result;
+
+	if (!(reg_eac & BIT(30)) &&
+	    (((reg_ec4 & 0x03FF0000) >> 16) != 0x132) &&
+	    (((reg_ecc & 0x03FF0000) >> 16) != 0x36))
+		result |= 0x02;
+	return result;
+}
+
+static void _rtl92c_phy_path_a_fill_iqk_matrix(struct ieee80211_hw *hw,
+					       bool b_iqk_ok, long result[][8],
+					       u8 final_candidate, bool btxonly)
+{
+	u32 oldval_0, x, tx0_a, reg;
+	long y, tx0_c;
+
+	if (final_candidate == 0xFF)
+		return;
+	else if (b_iqk_ok) {
+		oldval_0 = (rtl_get_bbreg(hw, ROFDM0_XATXIQIMBALANCE,
+					  MASKDWORD) >> 22) & 0x3FF;
+		x = result[final_candidate][0];
+		if ((x & 0x00000200) != 0)
+			x = x | 0xFFFFFC00;
+		tx0_a = (x * oldval_0) >> 8;
+		rtl_set_bbreg(hw, ROFDM0_XATXIQIMBALANCE, 0x3FF, tx0_a);
+		rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(31),
+			      ((x * oldval_0 >> 7) & 0x1));
+		y = result[final_candidate][1];
+		if ((y & 0x00000200) != 0)
+			y = y | 0xFFFFFC00;
+		tx0_c = (y * oldval_0) >> 8;
+		rtl_set_bbreg(hw, ROFDM0_XCTXAFE, 0xF0000000,
+			      ((tx0_c & 0x3C0) >> 6));
+		rtl_set_bbreg(hw, ROFDM0_XATXIQIMBALANCE, 0x003F0000,
+			      (tx0_c & 0x3F));
+		rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(29),
+			      ((y * oldval_0 >> 7) & 0x1));
+		if (btxonly)
+			return;
+		reg = result[final_candidate][2];
+		rtl_set_bbreg(hw, ROFDM0_XARXIQIMBALANCE, 0x3FF, reg);
+		reg = result[final_candidate][3] & 0x3F;
+		rtl_set_bbreg(hw, ROFDM0_XARXIQIMBALANCE, 0xFC00, reg);
+		reg = (result[final_candidate][3] >> 6) & 0xF;
+		rtl_set_bbreg(hw, 0xca0, 0xF0000000, reg);
+	}
+}
+
+static void _rtl92c_phy_path_b_fill_iqk_matrix(struct ieee80211_hw *hw,
+					       bool b_iqk_ok, long result[][8],
+					       u8 final_candidate, bool btxonly)
+{
+	u32 oldval_1, x, tx1_a, reg;
+	long y, tx1_c;
+
+	if (final_candidate == 0xFF)
+		return;
+	else if (b_iqk_ok) {
+		oldval_1 = (rtl_get_bbreg(hw, ROFDM0_XBTXIQIMBALANCE,
+					  MASKDWORD) >> 22) & 0x3FF;
+		x = result[final_candidate][4];
+		if ((x & 0x00000200) != 0)
+			x = x | 0xFFFFFC00;
+		tx1_a = (x * oldval_1) >> 8;
+		rtl_set_bbreg(hw, ROFDM0_XBTXIQIMBALANCE, 0x3FF, tx1_a);
+		rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(27),
+			      ((x * oldval_1 >> 7) & 0x1));
+		y = result[final_candidate][5];
+		if ((y & 0x00000200) != 0)
+			y = y | 0xFFFFFC00;
+		tx1_c = (y * oldval_1) >> 8;
+		rtl_set_bbreg(hw, ROFDM0_XDTXAFE, 0xF0000000,
+			      ((tx1_c & 0x3C0) >> 6));
+		rtl_set_bbreg(hw, ROFDM0_XBTXIQIMBALANCE, 0x003F0000,
+			      (tx1_c & 0x3F));
+		rtl_set_bbreg(hw, ROFDM0_ECCATHRESHOLD, BIT(25),
+			      ((y * oldval_1 >> 7) & 0x1));
+		if (btxonly)
+			return;
+		reg = result[final_candidate][6];
+		rtl_set_bbreg(hw, ROFDM0_XBRXIQIMBALANCE, 0x3FF, reg);
+		reg = result[final_candidate][7] & 0x3F;
+		rtl_set_bbreg(hw, ROFDM0_XBRXIQIMBALANCE, 0xFC00, reg);
+		reg = (result[final_candidate][7] >> 6) & 0xF;
+		rtl_set_bbreg(hw, ROFDM0_AGCRSSITABLE, 0x0000F000, reg);
+	}
+}
+
+static void _rtl92c_phy_save_adda_registers(struct ieee80211_hw *hw,
+					    u32 *addareg, u32 *addabackup,
+					    u32 registernum)
+{
+	u32 i;
+
+	for (i = 0; i < registernum; i++)
+		addabackup[i] = rtl_get_bbreg(hw, addareg[i], MASKDWORD);
+}
+
+static void _rtl92c_phy_save_mac_registers(struct ieee80211_hw *hw,
+					   u32 *macreg, u32 *macbackup)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 i;
+
+	for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++)
+		macbackup[i] = rtl_read_byte(rtlpriv, macreg[i]);
+	macbackup[i] = rtl_read_dword(rtlpriv, macreg[i]);
+}
+
+static void _rtl92c_phy_reload_adda_registers(struct ieee80211_hw *hw,
+					      u32 *addareg, u32 *addabackup,
+					      u32 regiesternum)
+{
+	u32 i;
+
+	for (i = 0; i < regiesternum; i++)
+		rtl_set_bbreg(hw, addareg[i], MASKDWORD, addabackup[i]);
+}
+
+static void _rtl92c_phy_reload_mac_registers(struct ieee80211_hw *hw,
+					     u32 *macreg, u32 *macbackup)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 i;
+
+	for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++)
+		rtl_write_byte(rtlpriv, macreg[i], (u8) macbackup[i]);
+	rtl_write_dword(rtlpriv, macreg[i], macbackup[i]);
+}
+
+static void _rtl92c_phy_path_adda_on(struct ieee80211_hw *hw,
+				     u32 *addareg, bool is_patha_on, bool is2t)
+{
+	u32 pathOn;
+	u32 i;
+
+	pathOn = is_patha_on ? 0x04db25a4 : 0x0b1b25a4;
+	if (false == is2t) {
+		pathOn = 0x0bdb25a0;
+		rtl_set_bbreg(hw, addareg[0], MASKDWORD, 0x0b1b25a0);
+	} else {
+		rtl_set_bbreg(hw, addareg[0], MASKDWORD, pathOn);
+	}
+
+	for (i = 1; i < IQK_ADDA_REG_NUM; i++)
+		rtl_set_bbreg(hw, addareg[i], MASKDWORD, pathOn);
+}
+
+static void _rtl92c_phy_mac_setting_calibration(struct ieee80211_hw *hw,
+						u32 *macreg, u32 *macbackup)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 i;
+
+	rtl_write_byte(rtlpriv, macreg[0], 0x3F);
+
+	for (i = 1; i < (IQK_MAC_REG_NUM - 1); i++)
+		rtl_write_byte(rtlpriv, macreg[i],
+			       (u8) (macbackup[i] & (~BIT(3))));
+	rtl_write_byte(rtlpriv, macreg[i], (u8) (macbackup[i] & (~BIT(5))));
+}
+
+static void _rtl92c_phy_path_a_standby(struct ieee80211_hw *hw)
+{
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x0);
+	rtl_set_bbreg(hw, 0x840, MASKDWORD, 0x00010000);
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x80800000);
+}
+
+static void _rtl92c_phy_pi_mode_switch(struct ieee80211_hw *hw, bool pi_mode)
+{
+	u32 mode;
+
+	mode = pi_mode ? 0x01000100 : 0x01000000;
+	rtl_set_bbreg(hw, 0x820, MASKDWORD, mode);
+	rtl_set_bbreg(hw, 0x828, MASKDWORD, mode);
+}
+
+static bool _rtl92c_phy_simularity_compare(struct ieee80211_hw *hw,
+					   long result[][8], u8 c1, u8 c2)
+{
+	u32 i, j, diff, simularity_bitmap, bound;
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	u8 final_candidate[2] = { 0xFF, 0xFF };
+	bool bresult = true, is2t = IS_92C_SERIAL(rtlhal->version);
+
+	if (is2t)
+		bound = 8;
+	else
+		bound = 4;
+
+	simularity_bitmap = 0;
+
+	for (i = 0; i < bound; i++) {
+		diff = (result[c1][i] > result[c2][i]) ?
+		    (result[c1][i] - result[c2][i]) :
+		    (result[c2][i] - result[c1][i]);
+
+		if (diff > MAX_TOLERANCE) {
+			if ((i == 2 || i == 6) && !simularity_bitmap) {
+				if (result[c1][i] + result[c1][i + 1] == 0)
+					final_candidate[(i / 4)] = c2;
+				else if (result[c2][i] + result[c2][i + 1] == 0)
+					final_candidate[(i / 4)] = c1;
+				else
+					simularity_bitmap = simularity_bitmap |
+					    (1 << i);
+			} else
+				simularity_bitmap =
+				    simularity_bitmap | (1 << i);
+		}
+	}
+
+	if (simularity_bitmap == 0) {
+		for (i = 0; i < (bound / 4); i++) {
+			if (final_candidate[i] != 0xFF) {
+				for (j = i * 4; j < (i + 1) * 4 - 2; j++)
+					result[3][j] =
+					    result[final_candidate[i]][j];
+				bresult = false;
+			}
+		}
+		return bresult;
+	} else if (!(simularity_bitmap & 0x0F)) {
+		for (i = 0; i < 4; i++)
+			result[3][i] = result[c1][i];
+		return false;
+	} else if (!(simularity_bitmap & 0xF0) && is2t) {
+		for (i = 4; i < 8; i++)
+			result[3][i] = result[c1][i];
+		return false;
+	} else {
+		return false;
+	}
+
+}
+
+static void _rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw,
+				     long result[][8], u8 t, bool is2t)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 i;
+	u8 patha_ok, pathb_ok;
+	u32 adda_reg[IQK_ADDA_REG_NUM] = {
+		0x85c, 0xe6c, 0xe70, 0xe74,
+		0xe78, 0xe7c, 0xe80, 0xe84,
+		0xe88, 0xe8c, 0xed0, 0xed4,
+		0xed8, 0xedc, 0xee0, 0xeec
+	};
+
+	u32 iqk_mac_reg[IQK_MAC_REG_NUM] = {
+		0x522, 0x550, 0x551, 0x040
+	};
+
+	const u32 retrycount = 2;
+
+	u32 bbvalue;
+
+	if (t == 0) {
+		bbvalue = rtl_get_bbreg(hw, 0x800, MASKDWORD);
+
+		_rtl92c_phy_save_adda_registers(hw, adda_reg,
+						rtlphy->adda_backup, 16);
+		_rtl92c_phy_save_mac_registers(hw, iqk_mac_reg,
+					       rtlphy->iqk_mac_backup);
+	}
+	_rtl92c_phy_path_adda_on(hw, adda_reg, true, is2t);
+	if (t == 0) {
+		rtlphy->b_rfpi_enable = (u8) rtl_get_bbreg(hw,
+						   RFPGA0_XA_HSSIPARAMETER1,
+						   BIT(8));
+	}
+	if (!rtlphy->b_rfpi_enable)
+		_rtl92c_phy_pi_mode_switch(hw, true);
+	if (t == 0) {
+		rtlphy->reg_c04 = rtl_get_bbreg(hw, 0xc04, MASKDWORD);
+		rtlphy->reg_c08 = rtl_get_bbreg(hw, 0xc08, MASKDWORD);
+		rtlphy->reg_874 = rtl_get_bbreg(hw, 0x874, MASKDWORD);
+	}
+	rtl_set_bbreg(hw, 0xc04, MASKDWORD, 0x03a05600);
+	rtl_set_bbreg(hw, 0xc08, MASKDWORD, 0x000800e4);
+	rtl_set_bbreg(hw, 0x874, MASKDWORD, 0x22204000);
+	if (is2t) {
+		rtl_set_bbreg(hw, 0x840, MASKDWORD, 0x00010000);
+		rtl_set_bbreg(hw, 0x844, MASKDWORD, 0x00010000);
+	}
+	_rtl92c_phy_mac_setting_calibration(hw, iqk_mac_reg,
+					    rtlphy->iqk_mac_backup);
+	rtl_set_bbreg(hw, 0xb68, MASKDWORD, 0x00080000);
+	if (is2t)
+		rtl_set_bbreg(hw, 0xb6c, MASKDWORD, 0x00080000);
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x80800000);
+	rtl_set_bbreg(hw, 0xe40, MASKDWORD, 0x01007c00);
+	rtl_set_bbreg(hw, 0xe44, MASKDWORD, 0x01004800);
+	for (i = 0; i < retrycount; i++) {
+		patha_ok = _rtl92c_phy_path_a_iqk(hw, is2t);
+		if (patha_ok == 0x03) {
+			result[t][0] = (rtl_get_bbreg(hw, 0xe94, MASKDWORD) &
+					0x3FF0000) >> 16;
+			result[t][1] = (rtl_get_bbreg(hw, 0xe9c, MASKDWORD) &
+					0x3FF0000) >> 16;
+			result[t][2] = (rtl_get_bbreg(hw, 0xea4, MASKDWORD) &
+					0x3FF0000) >> 16;
+			result[t][3] = (rtl_get_bbreg(hw, 0xeac, MASKDWORD) &
+					0x3FF0000) >> 16;
+			break;
+		} else if (i == (retrycount - 1) && patha_ok == 0x01)
+			result[t][0] = (rtl_get_bbreg(hw, 0xe94,
+						      MASKDWORD) & 0x3FF0000) >>
+						      16;
+		result[t][1] =
+		    (rtl_get_bbreg(hw, 0xe9c, MASKDWORD) & 0x3FF0000) >> 16;
+
+	}
+
+	if (is2t) {
+		_rtl92c_phy_path_a_standby(hw);
+		_rtl92c_phy_path_adda_on(hw, adda_reg, false, is2t);
+		for (i = 0; i < retrycount; i++) {
+			pathb_ok = _rtl92c_phy_path_b_iqk(hw);
+			if (pathb_ok == 0x03) {
+				result[t][4] = (rtl_get_bbreg(hw,
+						      0xeb4,
+						      MASKDWORD) &
+						0x3FF0000) >> 16;
+				result[t][5] =
+				    (rtl_get_bbreg(hw, 0xebc, MASKDWORD) &
+				     0x3FF0000) >> 16;
+				result[t][6] =
+				    (rtl_get_bbreg(hw, 0xec4, MASKDWORD) &
+				     0x3FF0000) >> 16;
+				result[t][7] =
+				    (rtl_get_bbreg(hw, 0xecc, MASKDWORD) &
+				     0x3FF0000) >> 16;
+				break;
+			} else if (i == (retrycount - 1) && pathb_ok == 0x01) {
+				result[t][4] = (rtl_get_bbreg(hw,
+						      0xeb4,
+						      MASKDWORD) &
+						0x3FF0000) >> 16;
+			}
+			result[t][5] = (rtl_get_bbreg(hw, 0xebc, MASKDWORD) &
+					0x3FF0000) >> 16;
+		}
+	}
+	rtl_set_bbreg(hw, 0xc04, MASKDWORD, rtlphy->reg_c04);
+	rtl_set_bbreg(hw, 0x874, MASKDWORD, rtlphy->reg_874);
+	rtl_set_bbreg(hw, 0xc08, MASKDWORD, rtlphy->reg_c08);
+	rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0);
+	rtl_set_bbreg(hw, 0x840, MASKDWORD, 0x00032ed3);
+	if (is2t)
+		rtl_set_bbreg(hw, 0x844, MASKDWORD, 0x00032ed3);
+	if (t != 0) {
+		if (!rtlphy->b_rfpi_enable)
+			_rtl92c_phy_pi_mode_switch(hw, false);
+		_rtl92c_phy_reload_adda_registers(hw, adda_reg,
+						  rtlphy->adda_backup, 16);
+		_rtl92c_phy_reload_mac_registers(hw, iqk_mac_reg,
+						 rtlphy->iqk_mac_backup);
+	}
+}
+
+static void _rtl92c_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t)
+{
+	u8 tmpreg;
+	u32 rf_a_mode = 0, rf_b_mode = 0, lc_cal;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	tmpreg = rtl_read_byte(rtlpriv, 0xd03);
+
+	if ((tmpreg & 0x70) != 0)
+		rtl_write_byte(rtlpriv, 0xd03, tmpreg & 0x8F);
+	else
+		rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF);
+
+	if ((tmpreg & 0x70) != 0) {
+		rf_a_mode = rtl_get_rfreg(hw, RF90_PATH_A, 0x00, MASK12BITS);
+
+		if (is2t)
+			rf_b_mode = rtl_get_rfreg(hw, RF90_PATH_B, 0x00,
+						  MASK12BITS);
+
+		rtl_set_rfreg(hw, RF90_PATH_A, 0x00, MASK12BITS,
+			      (rf_a_mode & 0x8FFFF) | 0x10000);
+
+		if (is2t)
+			rtl_set_rfreg(hw, RF90_PATH_B, 0x00, MASK12BITS,
+				      (rf_b_mode & 0x8FFFF) | 0x10000);
+	}
+	lc_cal = rtl_get_rfreg(hw, RF90_PATH_A, 0x18, MASK12BITS);
+
+	rtl_set_rfreg(hw, RF90_PATH_A, 0x18, MASK12BITS, lc_cal | 0x08000);
+
+	mdelay(100);
+
+	if ((tmpreg & 0x70) != 0) {
+		rtl_write_byte(rtlpriv, 0xd03, tmpreg);
+		rtl_set_rfreg(hw, RF90_PATH_A, 0x00, MASK12BITS, rf_a_mode);
+
+		if (is2t)
+			rtl_set_rfreg(hw, RF90_PATH_B, 0x00, MASK12BITS,
+				      rf_b_mode);
+	} else {
+		rtl_write_byte(rtlpriv, REG_TXPAUSE, 0x00);
+	}
+}
+
+static void _rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw,
+				     char delta, bool is2t)
+{
+	/* This routine is deliberately dummied out for later fixes */
+#if 0
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+	u32 reg_d[PATH_NUM];
+	u32 tmpreg, index, offset, path, i, pathbound = PATH_NUM, apkbound;
+
+	u32 bb_backup[APK_BB_REG_NUM];
+	u32 bb_reg[APK_BB_REG_NUM] = {
+		0x904, 0xc04, 0x800, 0xc08, 0x874
+	};
+	u32 bb_ap_mode[APK_BB_REG_NUM] = {
+		0x00000020, 0x00a05430, 0x02040000,
+		0x000800e4, 0x00204000
+	};
+	u32 bb_normal_ap_mode[APK_BB_REG_NUM] = {
+		0x00000020, 0x00a05430, 0x02040000,
+		0x000800e4, 0x22204000
+	};
+
+	u32 afe_backup[APK_AFE_REG_NUM];
+	u32 afe_reg[APK_AFE_REG_NUM] = {
+		0x85c, 0xe6c, 0xe70, 0xe74, 0xe78,
+		0xe7c, 0xe80, 0xe84, 0xe88, 0xe8c,
+		0xed0, 0xed4, 0xed8, 0xedc, 0xee0,
+		0xeec
+	};
+
+	u32 mac_backup[IQK_MAC_REG_NUM];
+	u32 mac_reg[IQK_MAC_REG_NUM] = {
+		0x522, 0x550, 0x551, 0x040
+	};
+
+	u32 apk_rf_init_value[PATH_NUM][APK_BB_REG_NUM] = {
+		{0x0852c, 0x1852c, 0x5852c, 0x1852c, 0x5852c},
+		{0x2852e, 0x0852e, 0x3852e, 0x0852e, 0x0852e}
+	};
+
+	u32 apk_normal_rf_init_value[PATH_NUM][APK_BB_REG_NUM] = {
+		{0x0852c, 0x0a52c, 0x3a52c, 0x5a52c, 0x5a52c},
+		{0x0852c, 0x0a52c, 0x5a52c, 0x5a52c, 0x5a52c}
+	};
+
+	u32 apk_rf_value_0[PATH_NUM][APK_BB_REG_NUM] = {
+		{0x52019, 0x52014, 0x52013, 0x5200f, 0x5208d},
+		{0x5201a, 0x52019, 0x52016, 0x52033, 0x52050}
+	};
+
+	u32 apk_normal_rf_value_0[PATH_NUM][APK_BB_REG_NUM] = {
+		{0x52019, 0x52017, 0x52010, 0x5200d, 0x5206a},
+		{0x52019, 0x52017, 0x52010, 0x5200d, 0x5206a}
+	};
+
+	u32 afe_on_off[PATH_NUM] = {
+		0x04db25a4, 0x0b1b25a4
+	};
+
+	u32 apk_offset[PATH_NUM] = { 0xb68, 0xb6c };
+
+	u32 apk_normal_offset[PATH_NUM] = { 0xb28, 0xb98 };
+
+	u32 apk_value[PATH_NUM] = { 0x92fc0000, 0x12fc0000 };
+
+	u32 apk_normal_value[PATH_NUM] = { 0x92680000, 0x12680000 };
+
+	const char apk_delta_mapping[APK_BB_REG_NUM][13] = {
+		{-4, -3, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6},
+		{-4, -3, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6},
+		{-6, -4, -2, -2, -1, -1, 0, 1, 2, 3, 4, 5, 6},
+		{-1, -1, -1, -1, -1, -1, 0, 1, 2, 3, 4, 5, 6},
+		{-11, -9, -7, -5, -3, -1, 0, 0, 0, 0, 0, 0, 0}
+	};
+
+	const u32 apk_normal_setting_value_1[13] = {
+		0x01017018, 0xf7ed8f84, 0x1b1a1816, 0x2522201e, 0x322e2b28,
+		0x433f3a36, 0x5b544e49, 0x7b726a62, 0xa69a8f84, 0xdfcfc0b3,
+		0x12680000, 0x00880000, 0x00880000
+	};
+
+	const u32 apk_normal_setting_value_2[16] = {
+		0x01c7021d, 0x01670183, 0x01000123, 0x00bf00e2, 0x008d00a3,
+		0x0068007b, 0x004d0059, 0x003a0042, 0x002b0031, 0x001f0025,
+		0x0017001b, 0x00110014, 0x000c000f, 0x0009000b, 0x00070008,
+		0x00050006
+	};
+
+	const u32 apk_result[PATH_NUM][APK_BB_REG_NUM];
+
+	long bb_offset, delta_v, delta_offset;
+
+	if (!is2t)
+		pathbound = 1;
+
+	for (index = 0; index < PATH_NUM; index++) {
+		apk_offset[index] = apk_normal_offset[index];
+		apk_value[index] = apk_normal_value[index];
+		afe_on_off[index] = 0x6fdb25a4;
+	}
+
+	for (index = 0; index < APK_BB_REG_NUM; index++) {
+		for (path = 0; path < pathbound; path++) {
+			apk_rf_init_value[path][index] =
+			    apk_normal_rf_init_value[path][index];
+			apk_rf_value_0[path][index] =
+			    apk_normal_rf_value_0[path][index];
+		}
+		bb_ap_mode[index] = bb_normal_ap_mode[index];
+
+		apkbound = 6;
+	}
+
+	for (index = 0; index < APK_BB_REG_NUM; index++) {
+		if (index == 0)
+			continue;
+		bb_backup[index] = rtl_get_bbreg(hw, bb_reg[index], MASKDWORD);
+	}
+
+	_rtl92c_phy_save_mac_registers(hw, mac_reg, mac_backup);
+
+	_rtl92c_phy_save_adda_registers(hw, afe_reg, afe_backup, 16);
+
+	for (path = 0; path < pathbound; path++) {
+		if (path == RF90_PATH_A) {
+			offset = 0xb00;
+			for (index = 0; index < 11; index++) {
+				rtl_set_bbreg(hw, offset, MASKDWORD,
+					      apk_normal_setting_value_1
+					      [index]);
+
+				offset += 0x04;
+			}
+
+			rtl_set_bbreg(hw, 0xb98, MASKDWORD, 0x12680000);
+
+			offset = 0xb68;
+			for (; index < 13; index++) {
+				rtl_set_bbreg(hw, offset, MASKDWORD,
+					      apk_normal_setting_value_1
+					      [index]);
+
+				offset += 0x04;
+			}
+
+			rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x40000000);
+
+			offset = 0xb00;
+			for (index = 0; index < 16; index++) {
+				rtl_set_bbreg(hw, offset, MASKDWORD,
+					      apk_normal_setting_value_2
+					      [index]);
+
+				offset += 0x04;
+			}
+			rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x00000000);
+		} else if (path == RF90_PATH_B) {
+			offset = 0xb70;
+			for (index = 0; index < 10; index++) {
+				rtl_set_bbreg(hw, offset, MASKDWORD,
+					      apk_normal_setting_value_1
+					      [index]);
+
+				offset += 0x04;
+			}
+			rtl_set_bbreg(hw, 0xb28, MASKDWORD, 0x12680000);
+			rtl_set_bbreg(hw, 0xb98, MASKDWORD, 0x12680000);
+
+			offset = 0xb68;
+			index = 11;
+			for (; index < 13; index++) {
+				rtl_set_bbreg(hw, offset, MASKDWORD,
+					      apk_normal_setting_value_1
+					      [index]);
+
+				offset += 0x04;
+			}
+
+			rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x40000000);
+
+			offset = 0xb60;
+			for (index = 0; index < 16; index++) {
+				rtl_set_bbreg(hw, offset, MASKDWORD,
+					      apk_normal_setting_value_2
+					      [index]);
+
+				offset += 0x04;
+			}
+			rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x00000000);
+		}
+
+		reg_d[path] = rtl_get_rfreg(hw, (enum radio_path)path,
+					    0xd, MASKDWORD);
+
+		for (index = 0; index < APK_AFE_REG_NUM; index++)
+			rtl_set_bbreg(hw, afe_reg[index], MASKDWORD,
+				      afe_on_off[path]);
+
+		if (path == RF90_PATH_A) {
+			for (index = 0; index < APK_BB_REG_NUM; index++) {
+				if (index == 0)
+					continue;
+				rtl_set_bbreg(hw, bb_reg[index], MASKDWORD,
+					      bb_ap_mode[index]);
+			}
+		}
+
+		_rtl92c_phy_mac_setting_calibration(hw, mac_reg, mac_backup);
+
+		if (path == 0) {
+			rtl_set_rfreg(hw, RF90_PATH_B, 0x0, MASKDWORD, 0x10000);
+		} else {
+			rtl_set_rfreg(hw, RF90_PATH_A, 0x00, MASKDWORD,
+				      0x10000);
+			rtl_set_rfreg(hw, RF90_PATH_A, 0x10, MASKDWORD,
+				      0x1000f);
+			rtl_set_rfreg(hw, RF90_PATH_A, 0x11, MASKDWORD,
+				      0x20103);
+		}
+
+		delta_offset = ((delta + 14) / 2);
+		if (delta_offset < 0)
+			delta_offset = 0;
+		else if (delta_offset > 12)
+			delta_offset = 12;
+
+		for (index = 0; index < APK_BB_REG_NUM; index++) {
+			if (index != 1)
+				continue;
+
+			tmpreg = apk_rf_init_value[path][index];
+
+			if (!rtlefuse->b_apk_thermalmeterignore) {
+				bb_offset = (tmpreg & 0xF0000) >> 16;
+
+				if (!(tmpreg & BIT(15)))
+					bb_offset = -bb_offset;
+
+				delta_v =
+				    apk_delta_mapping[index][delta_offset];
+
+				bb_offset += delta_v;
+
+				if (bb_offset < 0) {
+					tmpreg = tmpreg & (~BIT(15));
+					bb_offset = -bb_offset;
+				} else {
+					tmpreg = tmpreg | BIT(15);
+				}
+
+				tmpreg =
+				    (tmpreg & 0xFFF0FFFF) | (bb_offset << 16);
+			}
+
+			rtl_set_rfreg(hw, (enum radio_path)path, 0xc,
+				      MASKDWORD, 0x8992e);
+			rtl_set_rfreg(hw, (enum radio_path)path, 0x0,
+				      MASKDWORD, apk_rf_value_0[path][index]);
+			rtl_set_rfreg(hw, (enum radio_path)path, 0xd,
+				      MASKDWORD, tmpreg);
+
+			i = 0;
+			do {
+				rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x80000000);
+				rtl_set_bbreg(hw, apk_offset[path],
+					      MASKDWORD, apk_value[0]);
+				RTPRINT(rtlpriv, FINIT, INIT_IQK,
+					("PHY_APCalibrate() offset 0x%x "
+					 "value 0x%x\n",
+					 apk_offset[path],
+					 rtl_get_bbreg(hw, apk_offset[path],
+						       MASKDWORD)));
+
+				mdelay(3);
+
+				rtl_set_bbreg(hw, apk_offset[path],
+					      MASKDWORD, apk_value[1]);
+				RTPRINT(rtlpriv, FINIT, INIT_IQK,
+					("PHY_APCalibrate() offset 0x%x "
+					 "value 0x%x\n",
+					 apk_offset[path],
+					 rtl_get_bbreg(hw, apk_offset[path],
+						       MASKDWORD)));
+
+				mdelay(20);
+
+				rtl_set_bbreg(hw, 0xe28, MASKDWORD, 0x00000000);
+
+				if (path == RF90_PATH_A)
+					tmpreg = rtl_get_bbreg(hw, 0xbd8,
+							       0x03E00000);
+				else
+					tmpreg = rtl_get_bbreg(hw, 0xbd8,
+							       0xF8000000);
+
+				RTPRINT(rtlpriv, FINIT, INIT_IQK,
+					("PHY_APCalibrate() offset "
+					 "0xbd8[25:21] %x\n", tmpreg));
+
+				i++;
+
+			} while (tmpreg > apkbound && i < 4);
+
+			apk_result[path][index] = tmpreg;
+		}
+	}
+
+	_rtl92c_phy_reload_mac_registers(hw, mac_reg, mac_backup);
+
+	for (index = 0; index < APK_BB_REG_NUM; index++) {
+		if (index == 0)
+			continue;
+		rtl_set_bbreg(hw, bb_reg[index], MASKDWORD, bb_backup[index]);
+	}
+
+	_rtl92c_phy_reload_adda_registers(hw, afe_reg, afe_backup, 16);
+
+	for (path = 0; path < pathbound; path++) {
+		rtl_set_rfreg(hw, (enum radio_path)path, 0xd,
+			      MASKDWORD, reg_d[path]);
+
+		if (path == RF90_PATH_B) {
+			rtl_set_rfreg(hw, RF90_PATH_A, 0x10, MASKDWORD,
+				      0x1000f);
+			rtl_set_rfreg(hw, RF90_PATH_A, 0x11, MASKDWORD,
+				      0x20101);
+		}
+
+		if (apk_result[path][1] > 6)
+			apk_result[path][1] = 6;
+	}
+
+	for (path = 0; path < pathbound; path++) {
+		rtl_set_rfreg(hw, (enum radio_path)path, 0x3, MASKDWORD,
+			      ((apk_result[path][1] << 15) |
+			       (apk_result[path][1] << 10) |
+			       (apk_result[path][1] << 5) |
+			       apk_result[path][1]));
+
+		if (path == RF90_PATH_A)
+			rtl_set_rfreg(hw, (enum radio_path)path, 0x4, MASKDWORD,
+				      ((apk_result[path][1] << 15) |
+				       (apk_result[path][1] << 10) |
+				       (0x00 << 5) | 0x05));
+		else
+			rtl_set_rfreg(hw, (enum radio_path)path, 0x4, MASKDWORD,
+				      ((apk_result[path][1] << 15) |
+				       (apk_result[path][1] << 10) |
+				       (0x02 << 5) | 0x05));
+
+		rtl_set_rfreg(hw, (enum radio_path)path, 0xe, MASKDWORD,
+			      ((0x08 << 15) | (0x08 << 10) | (0x08 << 5) |
+			       0x08));
+
+	}
+
+	rtlphy->b_apk_done = true;
+#endif
+}
+
+static void _rtl92c_phy_set_rfpath_switch(struct ieee80211_hw *hw,
+					  bool bmain, bool is2t)
+{
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (is_hal_stop(rtlhal)) {
+		rtl_set_bbreg(hw, REG_LEDCFG0, BIT(23), 0x01);
+		rtl_set_bbreg(hw, rFPGA0_XAB_RFPARAMETER, BIT(13), 0x01);
+	}
+	if (is2t) {
+		if (bmain)
+			rtl_set_bbreg(hw, RFPGA0_XB_RFINTERFACEOE,
+				      BIT(5) | BIT(6), 0x1);
+		else
+			rtl_set_bbreg(hw, RFPGA0_XB_RFINTERFACEOE,
+				      BIT(5) | BIT(6), 0x2);
+	} else {
+		if (bmain)
+			rtl_set_bbreg(hw, RFPGA0_XA_RFINTERFACEOE, 0x300, 0x2);
+		else
+			rtl_set_bbreg(hw, RFPGA0_XA_RFINTERFACEOE, 0x300, 0x1);
+
+	}
+}
+
+#undef IQK_ADDA_REG_NUM
+#undef IQK_DELAY_TIME
+
+void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	long result[4][8];
+	u8 i, final_candidate;
+	bool b_patha_ok, b_pathb_ok;
+	long reg_e94, reg_e9c, reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4,
+	    reg_ecc, reg_tmp = 0;
+	bool is12simular, is13simular, is23simular;
+	bool b_start_conttx = false, b_singletone = false;
+	u32 iqk_bb_reg[10] = {
+		ROFDM0_XARXIQIMBALANCE,
+		ROFDM0_XBRXIQIMBALANCE,
+		ROFDM0_ECCATHRESHOLD,
+		ROFDM0_AGCRSSITABLE,
+		ROFDM0_XATXIQIMBALANCE,
+		ROFDM0_XBTXIQIMBALANCE,
+		ROFDM0_XCTXIQIMBALANCE,
+		ROFDM0_XCTXAFE,
+		ROFDM0_XDTXAFE,
+		ROFDM0_RXIQEXTANTA
+	};
+
+	if (b_recovery) {
+		_rtl92c_phy_reload_adda_registers(hw,
+						  iqk_bb_reg,
+						  rtlphy->iqk_bb_backup, 10);
+		return;
+	}
+	if (b_start_conttx || b_singletone)
+		return;
+	for (i = 0; i < 8; i++) {
+		result[0][i] = 0;
+		result[1][i] = 0;
+		result[2][i] = 0;
+		result[3][i] = 0;
+	}
+	final_candidate = 0xff;
+	b_patha_ok = false;
+	b_pathb_ok = false;
+	is12simular = false;
+	is23simular = false;
+	is13simular = false;
+	for (i = 0; i < 3; i++) {
+		if (IS_92C_SERIAL(rtlhal->version))
+			_rtl92c_phy_iq_calibrate(hw, result, i, true);
+		else
+			_rtl92c_phy_iq_calibrate(hw, result, i, false);
+		if (i == 1) {
+			is12simular = _rtl92c_phy_simularity_compare(hw,
+								     result, 0,
+								     1);
+			if (is12simular) {
+				final_candidate = 0;
+				break;
+			}
+		}
+		if (i == 2) {
+			is13simular = _rtl92c_phy_simularity_compare(hw,
+								     result, 0,
+								     2);
+			if (is13simular) {
+				final_candidate = 0;
+				break;
+			}
+			is23simular = _rtl92c_phy_simularity_compare(hw,
+								     result, 1,
+								     2);
+			if (is23simular)
+				final_candidate = 1;
+			else {
+				for (i = 0; i < 8; i++)
+					reg_tmp += result[3][i];
+
+				if (reg_tmp != 0)
+					final_candidate = 3;
+				else
+					final_candidate = 0xFF;
+			}
+		}
+	}
+	for (i = 0; i < 4; i++) {
+		reg_e94 = result[i][0];
+		reg_e9c = result[i][1];
+		reg_ea4 = result[i][2];
+		reg_eac = result[i][3];
+		reg_eb4 = result[i][4];
+		reg_ebc = result[i][5];
+		reg_ec4 = result[i][6];
+		reg_ecc = result[i][7];
+	}
+	if (final_candidate != 0xff) {
+		rtlphy->reg_e94 = reg_e94 = result[final_candidate][0];
+		rtlphy->reg_e9c = reg_e9c = result[final_candidate][1];
+		reg_ea4 = result[final_candidate][2];
+		reg_eac = result[final_candidate][3];
+		rtlphy->reg_eb4 = reg_eb4 = result[final_candidate][4];
+		rtlphy->reg_ebc = reg_ebc = result[final_candidate][5];
+		reg_ec4 = result[final_candidate][6];
+		reg_ecc = result[final_candidate][7];
+		b_patha_ok = b_pathb_ok = true;
+	} else {
+		rtlphy->reg_e94 = rtlphy->reg_eb4 = 0x100;
+		rtlphy->reg_e9c = rtlphy->reg_ebc = 0x0;
+	}
+	if (reg_e94 != 0) /*&&(reg_ea4 != 0) */
+		_rtl92c_phy_path_a_fill_iqk_matrix(hw, b_patha_ok, result,
+						   final_candidate,
+						   (reg_ea4 == 0));
+	if (IS_92C_SERIAL(rtlhal->version)) {
+		if (reg_eb4 != 0) /*&&(reg_ec4 != 0) */
+			_rtl92c_phy_path_b_fill_iqk_matrix(hw, b_pathb_ok,
+							   result,
+							   final_candidate,
+							   (reg_ec4 == 0));
+	}
+	_rtl92c_phy_save_adda_registers(hw, iqk_bb_reg,
+					rtlphy->iqk_bb_backup, 10);
+}
+
+void rtl92c_phy_lc_calibrate(struct ieee80211_hw *hw)
+{
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	bool b_start_conttx = false, b_singletone = false;
+
+	if (b_start_conttx || b_singletone)
+		return;
+	if (IS_92C_SERIAL(rtlhal->version))
+		_rtl92c_phy_lc_calibrate(hw, true);
+	else
+		_rtl92c_phy_lc_calibrate(hw, false);
+}
+
+void rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw, char delta)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (rtlphy->b_apk_done)
+		return;
+	if (IS_92C_SERIAL(rtlhal->version))
+		_rtl92c_phy_ap_calibrate(hw, delta, true);
+	else
+		_rtl92c_phy_ap_calibrate(hw, delta, false);
+}
+
+void rtl92c_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain)
+{
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	if (IS_92C_SERIAL(rtlhal->version))
+		_rtl92c_phy_set_rfpath_switch(hw, bmain, true);
+	else
+		_rtl92c_phy_set_rfpath_switch(hw, bmain, false);
+}
+
+bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	bool b_postprocessing = false;
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE,
+		 ("-->IO Cmd(%#x), set_io_inprogress(%d)\n",
+		  iotype, rtlphy->set_io_inprogress));
+	do {
+		switch (iotype) {
+		case IO_CMD_RESUME_DM_BY_SCAN:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE,
+				 ("[IO CMD] Resume DM after scan.\n"));
+			b_postprocessing = true;
+			break;
+		case IO_CMD_PAUSE_DM_BY_SCAN:
+			RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE,
+				 ("[IO CMD] Pause DM before scan.\n"));
+			b_postprocessing = true;
+			break;
+		default:
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+				 ("switch case not process\n"));
+			break;
+		}
+	} while (false);
+	if (b_postprocessing && !rtlphy->set_io_inprogress) {
+		rtlphy->set_io_inprogress = true;
+		rtlphy->current_io_type = iotype;
+	} else {
+		return false;
+	}
+	rtl92c_phy_set_io(hw);
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE, ("<--IO Type(%#x)\n", iotype));
+	return true;
+}
+
+void rtl92c_phy_set_io(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE,
+		 ("--->Cmd(%#x), set_io_inprogress(%d)\n",
+		  rtlphy->current_io_type, rtlphy->set_io_inprogress));
+	switch (rtlphy->current_io_type) {
+	case IO_CMD_RESUME_DM_BY_SCAN:
+		dm_digtable.cur_igvalue = rtlphy->initgain_backup.xaagccore1;
+		rtl92c_dm_write_dig(hw);
+		rtl92c_phy_set_txpower_level(hw, rtlphy->current_channel);
+		break;
+	case IO_CMD_PAUSE_DM_BY_SCAN:
+		rtlphy->initgain_backup.xaagccore1 = dm_digtable.cur_igvalue;
+		dm_digtable.cur_igvalue = 0x17;
+		rtl92c_dm_write_dig(hw);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		break;
+	}
+	rtlphy->set_io_inprogress = false;
+	RT_TRACE(rtlpriv, COMP_CMD, DBG_TRACE,
+		 ("<---(%#x)\n", rtlphy->current_io_type));
+}
+
+void rtl92ce_phy_set_rf_on(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x2b);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3);
+	rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x00);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3);
+	rtl_write_byte(rtlpriv, REG_TXPAUSE, 0x00);
+}
+
+static void _rtl92ce_phy_set_rf_sleep(struct ieee80211_hw *hw)
+{
+	u32 u4b_tmp;
+	u8 delay = 5;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	rtl_write_byte(rtlpriv, REG_TXPAUSE, 0xFF);
+	rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00);
+	rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
+	u4b_tmp = rtl_get_rfreg(hw, RF90_PATH_A, 0, RFREG_OFFSET_MASK);
+	while (u4b_tmp != 0 && delay > 0) {
+		rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x0);
+		rtl_set_rfreg(hw, RF90_PATH_A, 0x00, RFREG_OFFSET_MASK, 0x00);
+		rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x40);
+		u4b_tmp = rtl_get_rfreg(hw, RF90_PATH_A, 0, RFREG_OFFSET_MASK);
+		delay--;
+	}
+	if (delay == 0) {
+		rtl_write_byte(rtlpriv, REG_APSD_CTRL, 0x00);
+		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
+		rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE3);
+		rtl_write_byte(rtlpriv, REG_TXPAUSE, 0x00);
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE,
+			 ("Switch RF timeout !!!.\n"));
+		return;
+	}
+	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN, 0xE2);
+	rtl_write_byte(rtlpriv, REG_SPS0_CTRL, 0x22);
+}
+
+static bool _rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw,
+					    enum rf_pwrstate rfpwr_state)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	bool bresult = true;
+	u8 i, queue_id;
+	struct rtl8192_tx_ring *ring = NULL;
+
+	ppsc->set_rfpowerstate_inprogress = true;
+	switch (rfpwr_state) {
+	case ERFON:{
+			if ((ppsc->rfpwr_state == ERFOFF) &&
+			    RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+				bool rtstatus;
+				u32 InitializeCount = 0;
+				do {
+					InitializeCount++;
+					RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+						 ("IPS Set eRf nic enable\n"));
+					rtstatus = rtl_ps_enable_nic(hw);
+				} while ((rtstatus != true)
+					 && (InitializeCount < 10));
+				RT_CLEAR_PS_LEVEL(ppsc,
+						  RT_RF_OFF_LEVL_HALT_NIC);
+			} else {
+				RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+					 ("Set ERFON sleeped:%d ms\n",
+					  jiffies_to_msecs(jiffies -
+						   ppsc->
+						   last_sleep_jiffies)));
+				ppsc->last_awake_jiffies = jiffies;
+				rtl92ce_phy_set_rf_on(hw);
+			}
+			if (mac->link_state == MAC80211_LINKED) {
+				rtlpriv->cfg->ops->led_control(hw,
+							       LED_CTL_LINK);
+			} else {
+				rtlpriv->cfg->ops->led_control(hw,
+							       LED_CTL_NO_LINK);
+			}
+			break;
+		}
+	case ERFOFF:{
+			for (queue_id = 0, i = 0;
+			     queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
+				ring = &pcipriv->dev.tx_ring[queue_id];
+				if (skb_queue_len(&ring->queue) == 0 ||
+				    queue_id == BEACON_QUEUE) {
+					queue_id++;
+					continue;
+				} else {
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("eRf Off/Sleep: %d times "
+						  "TcbBusyQueue[%d] "
+						  "=%d before doze!\n", (i + 1),
+						  queue_id,
+						  skb_queue_len(&ring->queue)));
+					udelay(10);
+					i++;
+				}
+				if (i >= MAX_DOZE_WAITING_TIMES_9x) {
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("\nERFOFF: %d times "
+						  "TcbBusyQueue[%d] = %d !\n",
+						  MAX_DOZE_WAITING_TIMES_9x,
+						  queue_id,
+						  skb_queue_len(&ring->queue)));
+					break;
+				}
+			}
+			if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) {
+				RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+					 ("IPS Set eRf nic disable\n"));
+				rtl_ps_disable_nic(hw);
+				RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+			} else {
+				if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS) {
+					rtlpriv->cfg->ops->led_control(hw,
+							       LED_CTL_NO_LINK);
+				} else {
+					rtlpriv->cfg->ops->led_control(hw,
+							     LED_CTL_POWER_OFF);
+				}
+			}
+			break;
+		}
+	case ERFSLEEP:{
+			if (ppsc->rfpwr_state == ERFOFF)
+				break;
+			for (queue_id = 0, i = 0;
+			     queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
+				ring = &pcipriv->dev.tx_ring[queue_id];
+				if (skb_queue_len(&ring->queue) == 0) {
+					queue_id++;
+					continue;
+				} else {
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("eRf Off/Sleep: %d times "
+						  "TcbBusyQueue[%d] =%d before "
+						  "doze!\n", (i + 1), queue_id,
+						  skb_queue_len(&ring->queue)));
+					udelay(10);
+					i++;
+				}
+				if (i >= MAX_DOZE_WAITING_TIMES_9x) {
+					RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+						 ("\n ERFSLEEP: %d times "
+						  "TcbBusyQueue[%d] = %d !\n",
+						  MAX_DOZE_WAITING_TIMES_9x,
+						  queue_id,
+						  skb_queue_len(&ring->queue)));
+					break;
+				}
+			}
+			RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+				 ("Set ERFSLEEP awaked:%d ms\n",
+				  jiffies_to_msecs(jiffies -
+						   ppsc->last_awake_jiffies)));
+			ppsc->last_sleep_jiffies = jiffies;
+			_rtl92ce_phy_set_rf_sleep(hw);
+			break;
+		}
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("switch case not process\n"));
+		bresult = false;
+		break;
+	}
+	if (bresult)
+		ppsc->rfpwr_state = rfpwr_state;
+	ppsc->set_rfpowerstate_inprogress = false;
+	return bresult;
+}
+
+bool rtl92c_phy_set_rf_power_state(struct ieee80211_hw *hw,
+				   enum rf_pwrstate rfpwr_state)
+{
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	bool bresult = false;
+
+	if (rfpwr_state == ppsc->rfpwr_state)
+		return bresult;
+	bresult = _rtl92ce_phy_set_rf_power_state(hw, rfpwr_state);
+	return bresult;
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
new file mode 100644
index 00000000000..ca4daee6e9a
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h
@@ -0,0 +1,237 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92C_PHY_H__
+#define __RTL92C_PHY_H__
+
+#define MAX_PRECMD_CNT			16
+#define MAX_RFDEPENDCMD_CNT		16
+#define MAX_POSTCMD_CNT			16
+
+#define MAX_DOZE_WAITING_TIMES_9x	64
+
+#define RT_CANNOT_IO(hw)		false
+#define HIGHPOWER_RADIOA_ARRAYLEN	22
+
+#define MAX_TOLERANCE			5
+#define	IQK_DELAY_TIME			1
+
+#define	APK_BB_REG_NUM			5
+#define	APK_AFE_REG_NUM			16
+#define	APK_CURVE_REG_NUM		4
+#define	PATH_NUM			2
+
+#define LOOP_LIMIT			5
+#define MAX_STALL_TIME			50
+#define AntennaDiversityValue		0x80
+#define MAX_TXPWR_IDX_NMODE_92S		63
+#define Reset_Cnt_Limit			3
+
+#define IQK_ADDA_REG_NUM		16
+#define IQK_MAC_REG_NUM			4
+
+#define RF90_PATH_MAX			2
+#define CHANNEL_MAX_NUMBER		14
+#define CHANNEL_GROUP_MAX		3
+
+#define CT_OFFSET_MAC_ADDR		0X16
+
+#define CT_OFFSET_CCK_TX_PWR_IDX	0x5A
+#define CT_OFFSET_HT401S_TX_PWR_IDX	0x60
+#define CT_OFFSET_HT402S_TX_PWR_IDX_DIF	0x66
+#define CT_OFFSET_HT20_TX_PWR_IDX_DIFF	0x69
+#define CT_OFFSET_OFDM_TX_PWR_IDX_DIFF	0x6C
+
+#define CT_OFFSET_HT40_MAX_PWR_OFFSET	0x6F
+#define CT_OFFSET_HT20_MAX_PWR_OFFSET	0x72
+
+#define CT_OFFSET_CHANNEL_PLAH		0x75
+#define CT_OFFSET_THERMAL_METER		0x78
+#define CT_OFFSET_RF_OPTION		0x79
+#define CT_OFFSET_VERSION		0x7E
+#define CT_OFFSET_CUSTOMER_ID		0x7F
+
+#define RTL92C_MAX_PATH_NUM		2
+#define CHANNEL_MAX_NUMBER		14
+#define CHANNEL_GROUP_MAX		3
+
+enum swchnlcmd_id {
+	CMDID_END,
+	CMDID_SET_TXPOWEROWER_LEVEL,
+	CMDID_BBREGWRITE10,
+	CMDID_WRITEPORT_ULONG,
+	CMDID_WRITEPORT_USHORT,
+	CMDID_WRITEPORT_UCHAR,
+	CMDID_RF_WRITEREG,
+};
+
+struct swchnlcmd {
+	enum swchnlcmd_id cmdid;
+	u32 para1;
+	u32 para2;
+	u32 msdelay;
+};
+
+enum hw90_block_e {
+	HW90_BLOCK_MAC = 0,
+	HW90_BLOCK_PHY0 = 1,
+	HW90_BLOCK_PHY1 = 2,
+	HW90_BLOCK_RF = 3,
+	HW90_BLOCK_MAXIMUM = 4,
+};
+
+enum baseband_config_type {
+	BASEBAND_CONFIG_PHY_REG = 0,
+	BASEBAND_CONFIG_AGC_TAB = 1,
+};
+
+enum ra_offset_area {
+	RA_OFFSET_LEGACY_OFDM1,
+	RA_OFFSET_LEGACY_OFDM2,
+	RA_OFFSET_HT_OFDM1,
+	RA_OFFSET_HT_OFDM2,
+	RA_OFFSET_HT_OFDM3,
+	RA_OFFSET_HT_OFDM4,
+	RA_OFFSET_HT_CCK,
+};
+
+enum antenna_path {
+	ANTENNA_NONE,
+	ANTENNA_D,
+	ANTENNA_C,
+	ANTENNA_CD,
+	ANTENNA_B,
+	ANTENNA_BD,
+	ANTENNA_BC,
+	ANTENNA_BCD,
+	ANTENNA_A,
+	ANTENNA_AD,
+	ANTENNA_AC,
+	ANTENNA_ACD,
+	ANTENNA_AB,
+	ANTENNA_ABD,
+	ANTENNA_ABC,
+	ANTENNA_ABCD
+};
+
+struct r_antenna_select_ofdm {
+	u32 r_tx_antenna:4;
+	u32 r_ant_l:4;
+	u32 r_ant_non_ht:4;
+	u32 r_ant_ht1:4;
+	u32 r_ant_ht2:4;
+	u32 r_ant_ht_s1:4;
+	u32 r_ant_non_ht_s1:4;
+	u32 ofdm_txsc:2;
+	u32 reserved:2;
+};
+
+struct r_antenna_select_cck {
+	u8 r_cckrx_enable_2:2;
+	u8 r_cckrx_enable:2;
+	u8 r_ccktx_enable:4;
+};
+
+struct efuse_contents {
+	u8 mac_addr[ETH_ALEN];
+	u8 cck_tx_power_idx[6];
+	u8 ht40_1s_tx_power_idx[6];
+	u8 ht40_2s_tx_power_idx_diff[3];
+	u8 ht20_tx_power_idx_diff[3];
+	u8 ofdm_tx_power_idx_diff[3];
+	u8 ht40_max_power_offset[3];
+	u8 ht20_max_power_offset[3];
+	u8 channel_plan;
+	u8 thermal_meter;
+	u8 rf_option[5];
+	u8 version;
+	u8 oem_id;
+	u8 regulatory;
+};
+
+struct tx_power_struct {
+	u8 cck[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 ht40_1s[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 ht40_2s[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 ht20_diff[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 legacy_ht_diff[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 legacy_ht_txpowerdiff;
+	u8 groupht20[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 groupht40[RTL92C_MAX_PATH_NUM][CHANNEL_MAX_NUMBER];
+	u8 pwrgroup_cnt;
+	u32 mcs_original_offset[4][16];
+};
+
+extern u32 rtl92c_phy_query_bb_reg(struct ieee80211_hw *hw,
+				   u32 regaddr, u32 bitmask);
+extern void rtl92c_phy_set_bb_reg(struct ieee80211_hw *hw,
+				  u32 regaddr, u32 bitmask, u32 data);
+extern u32 rtl92c_phy_query_rf_reg(struct ieee80211_hw *hw,
+				   enum radio_path rfpath, u32 regaddr,
+				   u32 bitmask);
+extern void rtl92c_phy_set_rf_reg(struct ieee80211_hw *hw,
+				  enum radio_path rfpath, u32 regaddr,
+				  u32 bitmask, u32 data);
+extern bool rtl92c_phy_mac_config(struct ieee80211_hw *hw);
+extern bool rtl92c_phy_bb_config(struct ieee80211_hw *hw);
+extern bool rtl92c_phy_rf_config(struct ieee80211_hw *hw);
+extern bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw,
+						 enum radio_path rfpath);
+extern void rtl92c_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+extern void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw,
+					 long *powerlevel);
+extern void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel);
+extern bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw,
+					  long power_indbm);
+extern void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw,
+					     u8 operation);
+extern void rtl92c_phy_set_bw_mode_callback(struct ieee80211_hw *hw);
+extern void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw,
+				   enum nl80211_channel_type ch_type);
+extern void rtl92c_phy_sw_chnl_callback(struct ieee80211_hw *hw);
+extern u8 rtl92c_phy_sw_chnl(struct ieee80211_hw *hw);
+extern void rtl92c_phy_iq_calibrate(struct ieee80211_hw *hw, bool b_recovery);
+extern void rtl92c_phy_set_beacon_hw_reg(struct ieee80211_hw *hw,
+					 u16 beaconinterval);
+void rtl92c_phy_ap_calibrate(struct ieee80211_hw *hw, char delta);
+void rtl92c_phy_lc_calibrate(struct ieee80211_hw *hw);
+void rtl92c_phy_set_rfpath_switch(struct ieee80211_hw *hw, bool bmain);
+bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw,
+					  enum radio_path rfpath);
+extern bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw,
+					      u32 rfpath);
+bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
+extern bool rtl92c_phy_set_rf_power_state(struct ieee80211_hw *hw,
+					  enum rf_pwrstate rfpwr_state);
+void rtl92c_phy_config_bb_external_pa(struct ieee80211_hw *hw);
+void rtl92ce_phy_set_rf_on(struct ieee80211_hw *hw);
+bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype);
+void rtl92c_phy_set_io(struct ieee80211_hw *hw);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
new file mode 100644
index 00000000000..875d5146522
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
@@ -0,0 +1,2065 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92C_REG_H__
+#define __RTL92C_REG_H__
+
+#define REG_SYS_ISO_CTRL			0x0000
+#define REG_SYS_FUNC_EN				0x0002
+#define REG_APS_FSMCO				0x0004
+#define REG_SYS_CLKR				0x0008
+#define REG_9346CR				0x000A
+#define REG_EE_VPD				0x000C
+#define REG_AFE_MISC				0x0010
+#define REG_SPS0_CTRL				0x0011
+#define REG_SPS_OCP_CFG				0x0018
+#define REG_RSV_CTRL				0x001C
+#define REG_RF_CTRL				0x001F
+#define REG_LDOA15_CTRL				0x0020
+#define REG_LDOV12D_CTRL			0x0021
+#define REG_LDOHCI12_CTRL			0x0022
+#define REG_LPLDO_CTRL				0x0023
+#define REG_AFE_XTAL_CTRL			0x0024
+#define REG_AFE_PLL_CTRL			0x0028
+#define REG_EFUSE_CTRL				0x0030
+#define REG_EFUSE_TEST				0x0034
+#define REG_PWR_DATA				0x0038
+#define REG_CAL_TIMER				0x003C
+#define REG_ACLK_MON				0x003E
+#define REG_GPIO_MUXCFG				0x0040
+#define REG_GPIO_IO_SEL				0x0042
+#define REG_MAC_PINMUX_CFG			0x0043
+#define REG_GPIO_PIN_CTRL			0x0044
+#define REG_GPIO_INTM				0x0048
+#define REG_LEDCFG0				0x004C
+#define REG_LEDCFG1				0x004D
+#define REG_LEDCFG2				0x004E
+#define REG_LEDCFG3				0x004F
+#define REG_FSIMR				0x0050
+#define REG_FSISR				0x0054
+
+#define REG_MCUFWDL				0x0080
+
+#define REG_HMEBOX_EXT_0			0x0088
+#define REG_HMEBOX_EXT_1			0x008A
+#define REG_HMEBOX_EXT_2			0x008C
+#define REG_HMEBOX_EXT_3			0x008E
+
+#define REG_BIST_SCAN				0x00D0
+#define REG_BIST_RPT				0x00D4
+#define REG_BIST_ROM_RPT			0x00D8
+#define REG_USB_SIE_INTF			0x00E0
+#define REG_PCIE_MIO_INTF			0x00E4
+#define REG_PCIE_MIO_INTD			0x00E8
+#define REG_HPON_FSM				0x00EC
+#define REG_SYS_CFG				0x00F0
+
+#define REG_CR					0x0100
+#define REG_PBP					0x0104
+#define REG_TRXDMA_CTRL				0x010C
+#define REG_TRXFF_BNDY				0x0114
+#define REG_TRXFF_STATUS			0x0118
+#define REG_RXFF_PTR				0x011C
+#define REG_HIMR				0x0120
+#define REG_HISR				0x0124
+#define REG_HIMRE				0x0128
+#define REG_HISRE				0x012C
+#define REG_CPWM				0x012F
+#define REG_FWIMR				0x0130
+#define REG_FWISR				0x0134
+#define REG_PKTBUF_DBG_CTRL			0x0140
+#define REG_PKTBUF_DBG_DATA_L			0x0144
+#define REG_PKTBUF_DBG_DATA_H			0x0148
+
+#define REG_TC0_CTRL				0x0150
+#define REG_TC1_CTRL				0x0154
+#define REG_TC2_CTRL				0x0158
+#define REG_TC3_CTRL				0x015C
+#define REG_TC4_CTRL				0x0160
+#define REG_TCUNIT_BASE				0x0164
+#define REG_MBIST_START				0x0174
+#define REG_MBIST_DONE				0x0178
+#define REG_MBIST_FAIL				0x017C
+#define REG_C2HEVT_MSG_NORMAL			0x01A0
+#define REG_C2HEVT_MSG_TEST			0x01B8
+#define REG_C2HEVT_CLEAR			0x01BF
+#define REG_MCUTST_1				0x01c0
+#define REG_FMETHR				0x01C8
+#define REG_HMETFR				0x01CC
+#define REG_HMEBOX_0				0x01D0
+#define REG_HMEBOX_1				0x01D4
+#define REG_HMEBOX_2				0x01D8
+#define REG_HMEBOX_3				0x01DC
+
+#define REG_LLT_INIT				0x01E0
+#define REG_BB_ACCEESS_CTRL			0x01E8
+#define REG_BB_ACCESS_DATA			0x01EC
+
+#define REG_RQPN				0x0200
+#define REG_FIFOPAGE				0x0204
+#define REG_TDECTRL				0x0208
+#define REG_TXDMA_OFFSET_CHK			0x020C
+#define REG_TXDMA_STATUS			0x0210
+#define REG_RQPN_NPQ				0x0214
+
+#define REG_RXDMA_AGG_PG_TH			0x0280
+#define REG_RXPKT_NUM				0x0284
+#define REG_RXDMA_STATUS			0x0288
+
+#define	REG_PCIE_CTRL_REG			0x0300
+#define	REG_INT_MIG				0x0304
+#define	REG_BCNQ_DESA				0x0308
+#define	REG_HQ_DESA				0x0310
+#define	REG_MGQ_DESA				0x0318
+#define	REG_VOQ_DESA				0x0320
+#define	REG_VIQ_DESA				0x0328
+#define	REG_BEQ_DESA				0x0330
+#define	REG_BKQ_DESA				0x0338
+#define	REG_RX_DESA				0x0340
+#define	REG_DBI					0x0348
+#define	REG_MDIO				0x0354
+#define	REG_DBG_SEL				0x0360
+#define	REG_PCIE_HRPWM				0x0361
+#define	REG_PCIE_HCPWM				0x0363
+#define	REG_UART_CTRL				0x0364
+#define	REG_UART_TX_DESA			0x0370
+#define	REG_UART_RX_DESA			0x0378
+
+#define	REG_HDAQ_DESA_NODEF			0x0000
+#define	REG_CMDQ_DESA_NODEF			0x0000
+
+#define REG_VOQ_INFORMATION			0x0400
+#define REG_VIQ_INFORMATION			0x0404
+#define REG_BEQ_INFORMATION			0x0408
+#define REG_BKQ_INFORMATION			0x040C
+#define REG_MGQ_INFORMATION			0x0410
+#define REG_HGQ_INFORMATION			0x0414
+#define REG_BCNQ_INFORMATION			0x0418
+
+#define REG_CPU_MGQ_INFORMATION			0x041C
+#define REG_FWHW_TXQ_CTRL			0x0420
+#define REG_HWSEQ_CTRL				0x0423
+#define REG_TXPKTBUF_BCNQ_BDNY			0x0424
+#define REG_TXPKTBUF_MGQ_BDNY			0x0425
+#define REG_MULTI_BCNQ_EN			0x0426
+#define REG_MULTI_BCNQ_OFFSET			0x0427
+#define REG_SPEC_SIFS				0x0428
+#define REG_RL					0x042A
+#define REG_DARFRC				0x0430
+#define REG_RARFRC				0x0438
+#define REG_RRSR				0x0440
+#define REG_ARFR0				0x0444
+#define REG_ARFR1				0x0448
+#define REG_ARFR2				0x044C
+#define REG_ARFR3				0x0450
+#define REG_AGGLEN_LMT				0x0458
+#define REG_AMPDU_MIN_SPACE			0x045C
+#define REG_TXPKTBUF_WMAC_LBK_BF_HD		0x045D
+#define REG_FAST_EDCA_CTRL			0x0460
+#define REG_RD_RESP_PKT_TH			0x0463
+#define REG_INIRTS_RATE_SEL			0x0480
+#define REG_INIDATA_RATE_SEL			0x0484
+#define REG_POWER_STATUS			0x04A4
+#define REG_POWER_STAGE1			0x04B4
+#define REG_POWER_STAGE2			0x04B8
+#define REG_PKT_LIFE_TIME			0x04C0
+#define REG_STBC_SETTING			0x04C4
+#define REG_PROT_MODE_CTRL			0x04C8
+#define REG_BAR_MODE_CTRL			0x04CC
+#define REG_RA_TRY_RATE_AGG_LMT			0x04CF
+#define REG_NQOS_SEQ				0x04DC
+#define REG_QOS_SEQ				0x04DE
+#define REG_NEED_CPU_HANDLE			0x04E0
+#define REG_PKT_LOSE_RPT			0x04E1
+#define REG_PTCL_ERR_STATUS			0x04E2
+#define REG_DUMMY				0x04FC
+
+#define REG_EDCA_VO_PARAM			0x0500
+#define REG_EDCA_VI_PARAM			0x0504
+#define REG_EDCA_BE_PARAM			0x0508
+#define REG_EDCA_BK_PARAM			0x050C
+#define REG_BCNTCFG				0x0510
+#define REG_PIFS				0x0512
+#define REG_RDG_PIFS				0x0513
+#define REG_SIFS_CTX				0x0514
+#define REG_SIFS_TRX				0x0516
+#define REG_AGGR_BREAK_TIME			0x051A
+#define REG_SLOT				0x051B
+#define REG_TX_PTCL_CTRL			0x0520
+#define REG_TXPAUSE				0x0522
+#define REG_DIS_TXREQ_CLR			0x0523
+#define REG_RD_CTRL				0x0524
+#define REG_TBTT_PROHIBIT			0x0540
+#define REG_RD_NAV_NXT				0x0544
+#define REG_NAV_PROT_LEN			0x0546
+#define REG_BCN_CTRL				0x0550
+#define REG_USTIME_TSF				0x0551
+#define REG_MBID_NUM				0x0552
+#define REG_DUAL_TSF_RST			0x0553
+#define REG_BCN_INTERVAL			0x0554
+#define REG_MBSSID_BCN_SPACE			0x0554
+#define REG_DRVERLYINT				0x0558
+#define REG_BCNDMATIM				0x0559
+#define REG_ATIMWND				0x055A
+#define REG_BCN_MAX_ERR				0x055D
+#define REG_RXTSF_OFFSET_CCK			0x055E
+#define REG_RXTSF_OFFSET_OFDM			0x055F
+#define REG_TSFTR				0x0560
+#define REG_INIT_TSFTR				0x0564
+#define REG_PSTIMER				0x0580
+#define REG_TIMER0				0x0584
+#define REG_TIMER1				0x0588
+#define REG_ACMHWCTRL				0x05C0
+#define REG_ACMRSTCTRL				0x05C1
+#define REG_ACMAVG				0x05C2
+#define REG_VO_ADMTIME				0x05C4
+#define REG_VI_ADMTIME				0x05C6
+#define REG_BE_ADMTIME				0x05C8
+#define REG_EDCA_RANDOM_GEN			0x05CC
+#define REG_SCH_TXCMD				0x05D0
+
+#define REG_APSD_CTRL				0x0600
+#define REG_BWOPMODE				0x0603
+#define REG_TCR					0x0604
+#define REG_RCR					0x0608
+#define REG_RX_PKT_LIMIT			0x060C
+#define REG_RX_DLK_TIME				0x060D
+#define REG_RX_DRVINFO_SZ			0x060F
+
+#define REG_MACID				0x0610
+#define REG_BSSID				0x0618
+#define REG_MAR					0x0620
+#define REG_MBIDCAMCFG				0x0628
+
+#define REG_USTIME_EDCA				0x0638
+#define REG_MAC_SPEC_SIFS			0x063A
+#define REG_RESP_SIFS_CCK			0x063C
+#define REG_RESP_SIFS_OFDM			0x063E
+#define REG_ACKTO				0x0640
+#define REG_CTS2TO				0x0641
+#define REG_EIFS				0x0642
+
+#define REG_NAV_CTRL				0x0650
+#define REG_BACAMCMD				0x0654
+#define REG_BACAMCONTENT			0x0658
+#define REG_LBDLY				0x0660
+#define REG_FWDLY				0x0661
+#define REG_RXERR_RPT				0x0664
+#define REG_WMAC_TRXPTCL_CTL			0x0668
+
+#define REG_CAMCMD				0x0670
+#define REG_CAMWRITE				0x0674
+#define REG_CAMREAD				0x0678
+#define REG_CAMDBG				0x067C
+#define REG_SECCFG				0x0680
+
+#define REG_WOW_CTRL				0x0690
+#define REG_PSSTATUS				0x0691
+#define REG_PS_RX_INFO				0x0692
+#define REG_LPNAV_CTRL				0x0694
+#define REG_WKFMCAM_CMD				0x0698
+#define REG_WKFMCAM_RWD				0x069C
+#define REG_RXFLTMAP0				0x06A0
+#define REG_RXFLTMAP1				0x06A2
+#define REG_RXFLTMAP2				0x06A4
+#define REG_BCN_PSR_RPT				0x06A8
+#define REG_CALB32K_CTRL			0x06AC
+#define REG_PKT_MON_CTRL			0x06B4
+#define REG_BT_COEX_TABLE			0x06C0
+#define REG_WMAC_RESP_TXINFO			0x06D8
+
+#define REG_USB_INFO				0xFE17
+#define REG_USB_SPECIAL_OPTION			0xFE55
+#define REG_USB_DMA_AGG_TO			0xFE5B
+#define REG_USB_AGG_TO				0xFE5C
+#define REG_USB_AGG_TH				0xFE5D
+
+#define REG_TEST_USB_TXQS			0xFE48
+#define REG_TEST_SIE_VID			0xFE60
+#define REG_TEST_SIE_PID			0xFE62
+#define REG_TEST_SIE_OPTIONAL			0xFE64
+#define REG_TEST_SIE_CHIRP_K			0xFE65
+#define REG_TEST_SIE_PHY			0xFE66
+#define REG_TEST_SIE_MAC_ADDR			0xFE70
+#define REG_TEST_SIE_STRING			0xFE80
+
+#define REG_NORMAL_SIE_VID			0xFE60
+#define REG_NORMAL_SIE_PID			0xFE62
+#define REG_NORMAL_SIE_OPTIONAL			0xFE64
+#define REG_NORMAL_SIE_EP			0xFE65
+#define REG_NORMAL_SIE_PHY			0xFE68
+#define REG_NORMAL_SIE_MAC_ADDR			0xFE70
+#define REG_NORMAL_SIE_STRING			0xFE80
+
+#define	CR9346					REG_9346CR
+#define	MSR					(REG_CR + 2)
+#define	ISR					REG_HISR
+#define	TSFR					REG_TSFTR
+
+#define	MACIDR0					REG_MACID
+#define	MACIDR4					(REG_MACID + 4)
+
+#define PBP					REG_PBP
+
+#define	IDR0					MACIDR0
+#define	IDR4					MACIDR4
+
+#define	UNUSED_REGISTER				0x1BF
+#define	DCAM					UNUSED_REGISTER
+#define	PSR					UNUSED_REGISTER
+#define BBADDR					UNUSED_REGISTER
+#define	PHYDATAR				UNUSED_REGISTER
+
+#define	INVALID_BBRF_VALUE			0x12345678
+
+#define	MAX_MSS_DENSITY_2T			0x13
+#define	MAX_MSS_DENSITY_1T			0x0A
+
+#define	CMDEEPROM_EN				BIT(5)
+#define	CMDEEPROM_SEL				BIT(4)
+#define	CMD9346CR_9356SEL			BIT(4)
+#define	AUTOLOAD_EEPROM				(CMDEEPROM_EN|CMDEEPROM_SEL)
+#define	AUTOLOAD_EFUSE				CMDEEPROM_EN
+
+#define	GPIOSEL_GPIO				0
+#define	GPIOSEL_ENBT				BIT(5)
+
+#define	GPIO_IN					REG_GPIO_PIN_CTRL
+#define	GPIO_OUT				(REG_GPIO_PIN_CTRL+1)
+#define	GPIO_IO_SEL				(REG_GPIO_PIN_CTRL+2)
+#define	GPIO_MOD				(REG_GPIO_PIN_CTRL+3)
+
+#define	MSR_NOLINK				0x00
+#define	MSR_ADHOC				0x01
+#define	MSR_INFRA				0x02
+#define	MSR_AP					0x03
+
+#define	RRSR_RSC_OFFSET				21
+#define	RRSR_SHORT_OFFSET			23
+#define	RRSR_RSC_BW_40M				0x600000
+#define	RRSR_RSC_UPSUBCHNL			0x400000
+#define	RRSR_RSC_LOWSUBCHNL			0x200000
+#define	RRSR_SHORT				0x800000
+#define	RRSR_1M					BIT(0)
+#define	RRSR_2M					BIT(1)
+#define	RRSR_5_5M				BIT(2)
+#define	RRSR_11M				BIT(3)
+#define	RRSR_6M					BIT(4)
+#define	RRSR_9M					BIT(5)
+#define	RRSR_12M				BIT(6)
+#define	RRSR_18M				BIT(7)
+#define	RRSR_24M				BIT(8)
+#define	RRSR_36M				BIT(9)
+#define	RRSR_48M				BIT(10)
+#define	RRSR_54M				BIT(11)
+#define	RRSR_MCS0				BIT(12)
+#define	RRSR_MCS1				BIT(13)
+#define	RRSR_MCS2				BIT(14)
+#define	RRSR_MCS3				BIT(15)
+#define	RRSR_MCS4				BIT(16)
+#define	RRSR_MCS5				BIT(17)
+#define	RRSR_MCS6				BIT(18)
+#define	RRSR_MCS7				BIT(19)
+#define	BRSR_ACKSHORTPMB			BIT(23)
+
+#define	RATR_1M					0x00000001
+#define	RATR_2M					0x00000002
+#define	RATR_55M				0x00000004
+#define	RATR_11M				0x00000008
+#define	RATR_6M					0x00000010
+#define	RATR_9M					0x00000020
+#define	RATR_12M				0x00000040
+#define	RATR_18M				0x00000080
+#define	RATR_24M				0x00000100
+#define	RATR_36M				0x00000200
+#define	RATR_48M				0x00000400
+#define	RATR_54M				0x00000800
+#define	RATR_MCS0				0x00001000
+#define	RATR_MCS1				0x00002000
+#define	RATR_MCS2				0x00004000
+#define	RATR_MCS3				0x00008000
+#define	RATR_MCS4				0x00010000
+#define	RATR_MCS5				0x00020000
+#define	RATR_MCS6				0x00040000
+#define	RATR_MCS7				0x00080000
+#define	RATR_MCS8				0x00100000
+#define	RATR_MCS9				0x00200000
+#define	RATR_MCS10				0x00400000
+#define	RATR_MCS11				0x00800000
+#define	RATR_MCS12				0x01000000
+#define	RATR_MCS13				0x02000000
+#define	RATR_MCS14				0x04000000
+#define	RATR_MCS15				0x08000000
+
+#define RATE_1M					BIT(0)
+#define RATE_2M					BIT(1)
+#define RATE_5_5M				BIT(2)
+#define RATE_11M				BIT(3)
+#define RATE_6M					BIT(4)
+#define RATE_9M					BIT(5)
+#define RATE_12M				BIT(6)
+#define RATE_18M				BIT(7)
+#define RATE_24M				BIT(8)
+#define RATE_36M				BIT(9)
+#define RATE_48M				BIT(10)
+#define RATE_54M				BIT(11)
+#define RATE_MCS0				BIT(12)
+#define RATE_MCS1				BIT(13)
+#define RATE_MCS2				BIT(14)
+#define RATE_MCS3				BIT(15)
+#define RATE_MCS4				BIT(16)
+#define RATE_MCS5				BIT(17)
+#define RATE_MCS6				BIT(18)
+#define RATE_MCS7				BIT(19)
+#define RATE_MCS8				BIT(20)
+#define RATE_MCS9				BIT(21)
+#define RATE_MCS10				BIT(22)
+#define RATE_MCS11				BIT(23)
+#define RATE_MCS12				BIT(24)
+#define RATE_MCS13				BIT(25)
+#define RATE_MCS14				BIT(26)
+#define RATE_MCS15				BIT(27)
+
+#define	RATE_ALL_CCK		(RATR_1M | RATR_2M | RATR_55M | RATR_11M)
+#define	RATE_ALL_OFDM_AG	(RATR_6M | RATR_9M | RATR_12M | RATR_18M \
+				| RATR_24M | RATR_36M | RATR_48M | RATR_54M)
+#define	RATE_ALL_OFDM_1SS	(RATR_MCS0 | RATR_MCS1 | RATR_MCS2 | \
+				RATR_MCS3 | RATR_MCS4 | RATR_MCS5 | \
+				RATR_MCS6 | RATR_MCS7)
+#define	RATE_ALL_OFDM_2SS	(RATR_MCS8 | RATR_MCS9 | RATR_MCS10 | \
+				RATR_MCS11 | RATR_MCS12 | RATR_MCS13 | \
+				RATR_MCS14 | RATR_MCS15)
+
+#define	BW_OPMODE_20MHZ				BIT(2)
+#define	BW_OPMODE_5G				BIT(1)
+#define	BW_OPMODE_11J				BIT(0)
+
+#define	CAM_VALID				BIT(15)
+#define	CAM_NOTVALID				0x0000
+#define	CAM_USEDK				BIT(5)
+
+#define	CAM_NONE				0x0
+#define	CAM_WEP40				0x01
+#define	CAM_TKIP				0x02
+#define	CAM_AES					0x04
+#define	CAM_WEP104				0x05
+
+#define	TOTAL_CAM_ENTRY				32
+#define	HALF_CAM_ENTRY				16
+
+#define	CAM_WRITE				BIT(16)
+#define	CAM_READ				0x00000000
+#define	CAM_POLLINIG				BIT(31)
+
+#define	SCR_USEDK				0x01
+#define	SCR_TXSEC_ENABLE			0x02
+#define	SCR_RXSEC_ENABLE			0x04
+
+#define	WOW_PMEN				BIT(0)
+#define	WOW_WOMEN				BIT(1)
+#define	WOW_MAGIC				BIT(2)
+#define	WOW_UWF					BIT(3)
+
+#define	IMR8190_DISABLED			0x0
+#define	IMR_BCNDMAINT6				BIT(31)
+#define	IMR_BCNDMAINT5				BIT(30)
+#define	IMR_BCNDMAINT4				BIT(29)
+#define	IMR_BCNDMAINT3				BIT(28)
+#define	IMR_BCNDMAINT2				BIT(27)
+#define	IMR_BCNDMAINT1				BIT(26)
+#define	IMR_BCNDOK8				BIT(25)
+#define	IMR_BCNDOK7				BIT(24)
+#define	IMR_BCNDOK6				BIT(23)
+#define	IMR_BCNDOK5				BIT(22)
+#define	IMR_BCNDOK4				BIT(21)
+#define	IMR_BCNDOK3				BIT(20)
+#define	IMR_BCNDOK2				BIT(19)
+#define	IMR_BCNDOK1				BIT(18)
+#define	IMR_TIMEOUT2				BIT(17)
+#define	IMR_TIMEOUT1				BIT(16)
+#define	IMR_TXFOVW				BIT(15)
+#define	IMR_PSTIMEOUT				BIT(14)
+#define	IMR_BCNINT				BIT(13)
+#define	IMR_RXFOVW				BIT(12)
+#define	IMR_RDU					BIT(11)
+#define	IMR_ATIMEND				BIT(10)
+#define	IMR_BDOK				BIT(9)
+#define	IMR_HIGHDOK				BIT(8)
+#define	IMR_TBDOK				BIT(7)
+#define	IMR_MGNTDOK				BIT(6)
+#define	IMR_TBDER				BIT(5)
+#define	IMR_BKDOK				BIT(4)
+#define	IMR_BEDOK				BIT(3)
+#define	IMR_VIDOK				BIT(2)
+#define	IMR_VODOK				BIT(1)
+#define	IMR_ROK					BIT(0)
+
+#define	IMR_TXERR				BIT(11)
+#define	IMR_RXERR				BIT(10)
+#define	IMR_C2HCMD				BIT(9)
+#define	IMR_CPWM				BIT(8)
+#define	IMR_OCPINT				BIT(1)
+#define	IMR_WLANOFF				BIT(0)
+
+#define	HWSET_MAX_SIZE				128
+
+#define	EEPROM_DEFAULT_TSSI			0x0
+#define EEPROM_DEFAULT_TXPOWERDIFF		0x0
+#define EEPROM_DEFAULT_CRYSTALCAP		0x5
+#define EEPROM_DEFAULT_BOARDTYPE		0x02
+#define EEPROM_DEFAULT_TXPOWER			0x1010
+#define	EEPROM_DEFAULT_HT2T_TXPWR		0x10
+
+#define	EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF	0x3
+#define	EEPROM_DEFAULT_THERMALMETER		0x12
+#define	EEPROM_DEFAULT_ANTTXPOWERDIFF		0x0
+#define	EEPROM_DEFAULT_TXPWDIFF_CRYSTALCAP	0x5
+#define	EEPROM_DEFAULT_TXPOWERLEVEL		0x22
+#define	EEPROM_DEFAULT_HT40_2SDIFF		0x0
+#define EEPROM_DEFAULT_HT20_DIFF		2
+#define	EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF	0x3
+#define EEPROM_DEFAULT_HT40_PWRMAXOFFSET	0
+#define EEPROM_DEFAULT_HT20_PWRMAXOFFSET	0
+
+#define RF_OPTION1				0x79
+#define RF_OPTION2				0x7A
+#define RF_OPTION3				0x7B
+#define RF_OPTION4				0x7C
+
+#define EEPROM_DEFAULT_PID			0x1234
+#define EEPROM_DEFAULT_VID			0x5678
+#define EEPROM_DEFAULT_CUSTOMERID		0xAB
+#define EEPROM_DEFAULT_SUBCUSTOMERID		0xCD
+#define EEPROM_DEFAULT_VERSION			0
+
+#define	EEPROM_CHANNEL_PLAN_FCC			0x0
+#define	EEPROM_CHANNEL_PLAN_IC			0x1
+#define	EEPROM_CHANNEL_PLAN_ETSI		0x2
+#define	EEPROM_CHANNEL_PLAN_SPAIN		0x3
+#define	EEPROM_CHANNEL_PLAN_FRANCE		0x4
+#define	EEPROM_CHANNEL_PLAN_MKK			0x5
+#define	EEPROM_CHANNEL_PLAN_MKK1		0x6
+#define	EEPROM_CHANNEL_PLAN_ISRAEL		0x7
+#define	EEPROM_CHANNEL_PLAN_TELEC		0x8
+#define	EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN	0x9
+#define	EEPROM_CHANNEL_PLAN_WORLD_WIDE_13	0xA
+#define	EEPROM_CHANNEL_PLAN_NCC			0xB
+#define	EEPROM_CHANNEL_PLAN_BY_HW_MASK		0x80
+
+#define EEPROM_CID_DEFAULT			0x0
+#define EEPROM_CID_TOSHIBA			0x4
+#define	EEPROM_CID_CCX				0x10
+#define	EEPROM_CID_QMI				0x0D
+#define EEPROM_CID_WHQL				0xFE
+
+#define	RTL8192_EEPROM_ID			0x8129
+
+#define RTL8190_EEPROM_ID			0x8129
+#define EEPROM_HPON				0x02
+#define EEPROM_CLK				0x06
+#define EEPROM_TESTR				0x08
+
+#define EEPROM_VID				0x0A
+#define EEPROM_DID				0x0C
+#define EEPROM_SVID				0x0E
+#define EEPROM_SMID				0x10
+
+#define EEPROM_MAC_ADDR				0x16
+
+#define EEPROM_CCK_TX_PWR_INX			0x5A
+#define EEPROM_HT40_1S_TX_PWR_INX		0x60
+#define EEPROM_HT40_2S_TX_PWR_INX_DIFF		0x66
+#define EEPROM_HT20_TX_PWR_INX_DIFF		0x69
+#define EEPROM_OFDM_TX_PWR_INX_DIFF		0x6C
+#define EEPROM_HT40_MAX_PWR_OFFSET		0x6F
+#define EEPROM_HT20_MAX_PWR_OFFSET		0x72
+
+#define EEPROM_TSSI_A				0x76
+#define EEPROM_TSSI_B				0x77
+#define EEPROM_THERMAL_METER			0x78
+#define EEPROM_XTAL_K				0x78
+#define EEPROM_RF_OPT1				0x79
+#define EEPROM_RF_OPT2				0x7A
+#define EEPROM_RF_OPT3				0x7B
+#define EEPROM_RF_OPT4				0x7C
+#define EEPROM_CHANNEL_PLAN			0x7D
+#define EEPROM_VERSION				0x7E
+#define EEPROM_CUSTOMER_ID			0x7F
+
+#define EEPROM_PWRDIFF				0x54
+
+#define EEPROM_TXPOWERCCK			0x5A
+#define	EEPROM_TXPOWERHT40_1S			0x60
+#define	EEPROM_TXPOWERHT40_2SDIFF		0x66
+#define EEPROM_TXPOWERHT20DIFF			0x69
+#define EEPROM_TXPOWER_OFDMDIFF			0x6C
+
+#define	EEPROM_TXPWR_GROUP			0x6F
+
+#define EEPROM_TSSI_A				0x76
+#define EEPROM_TSSI_B				0x77
+#define EEPROM_THERMAL_METER			0x78
+
+#define EEPROM_CHANNELPLAN			0x75
+
+#define RF_OPTION1				0x79
+#define RF_OPTION2				0x7A
+#define RF_OPTION3				0x7B
+#define RF_OPTION4				0x7C
+
+#define	STOPBECON				BIT(6)
+#define	STOPHIGHT				BIT(5)
+#define	STOPMGT					BIT(4)
+#define	STOPVO					BIT(3)
+#define	STOPVI					BIT(2)
+#define	STOPBE					BIT(1)
+#define	STOPBK					BIT(0)
+
+#define	RCR_APPFCS				BIT(31)
+#define	RCR_APP_MIC				BIT(30)
+#define	RCR_APP_ICV				BIT(29)
+#define	RCR_APP_PHYST_RXFF			BIT(28)
+#define	RCR_APP_BA_SSN				BIT(27)
+#define	RCR_ENMBID				BIT(24)
+#define	RCR_LSIGEN				BIT(23)
+#define	RCR_MFBEN				BIT(22)
+#define	RCR_HTC_LOC_CTRL			BIT(14)
+#define	RCR_AMF					BIT(13)
+#define	RCR_ACF					BIT(12)
+#define	RCR_ADF					BIT(11)
+#define	RCR_AICV				BIT(9)
+#define	RCR_ACRC32				BIT(8)
+#define	RCR_CBSSID_BCN				BIT(7)
+#define	RCR_CBSSID_DATA				BIT(6)
+#define	RCR_CBSSID				RCR_CBSSID_DATA
+#define	RCR_APWRMGT				BIT(5)
+#define	RCR_ADD3				BIT(4)
+#define	RCR_AB					BIT(3)
+#define	RCR_AM					BIT(2)
+#define	RCR_APM					BIT(1)
+#define	RCR_AAP					BIT(0)
+#define	RCR_MXDMA_OFFSET			8
+#define	RCR_FIFO_OFFSET				13
+
+#define RSV_CTRL				0x001C
+#define RD_CTRL					0x0524
+
+#define REG_USB_INFO				0xFE17
+#define REG_USB_SPECIAL_OPTION			0xFE55
+#define REG_USB_DMA_AGG_TO			0xFE5B
+#define REG_USB_AGG_TO				0xFE5C
+#define REG_USB_AGG_TH				0xFE5D
+
+#define REG_USB_VID				0xFE60
+#define REG_USB_PID				0xFE62
+#define REG_USB_OPTIONAL			0xFE64
+#define REG_USB_CHIRP_K				0xFE65
+#define REG_USB_PHY				0xFE66
+#define REG_USB_MAC_ADDR			0xFE70
+#define REG_USB_HRPWM				0xFE58
+#define REG_USB_HCPWM				0xFE57
+
+#define SW18_FPWM				BIT(3)
+
+#define ISO_MD2PP				BIT(0)
+#define ISO_UA2USB				BIT(1)
+#define ISO_UD2CORE				BIT(2)
+#define ISO_PA2PCIE				BIT(3)
+#define ISO_PD2CORE				BIT(4)
+#define ISO_IP2MAC				BIT(5)
+#define ISO_DIOP				BIT(6)
+#define ISO_DIOE				BIT(7)
+#define ISO_EB2CORE				BIT(8)
+#define ISO_DIOR				BIT(9)
+
+#define PWC_EV25V				BIT(14)
+#define PWC_EV12V				BIT(15)
+
+#define FEN_BBRSTB				BIT(0)
+#define FEN_BB_GLB_RSTn				BIT(1)
+#define FEN_USBA				BIT(2)
+#define FEN_UPLL				BIT(3)
+#define FEN_USBD				BIT(4)
+#define FEN_DIO_PCIE				BIT(5)
+#define FEN_PCIEA				BIT(6)
+#define FEN_PPLL				BIT(7)
+#define FEN_PCIED				BIT(8)
+#define FEN_DIOE				BIT(9)
+#define FEN_CPUEN				BIT(10)
+#define FEN_DCORE				BIT(11)
+#define FEN_ELDR				BIT(12)
+#define FEN_DIO_RF				BIT(13)
+#define FEN_HWPDN				BIT(14)
+#define FEN_MREGEN				BIT(15)
+
+#define PFM_LDALL				BIT(0)
+#define PFM_ALDN				BIT(1)
+#define PFM_LDKP				BIT(2)
+#define PFM_WOWL				BIT(3)
+#define EnPDN					BIT(4)
+#define PDN_PL					BIT(5)
+#define APFM_ONMAC				BIT(8)
+#define APFM_OFF				BIT(9)
+#define APFM_RSM				BIT(10)
+#define AFSM_HSUS				BIT(11)
+#define AFSM_PCIE				BIT(12)
+#define APDM_MAC				BIT(13)
+#define APDM_HOST				BIT(14)
+#define APDM_HPDN				BIT(15)
+#define RDY_MACON				BIT(16)
+#define SUS_HOST				BIT(17)
+#define ROP_ALD					BIT(20)
+#define ROP_PWR					BIT(21)
+#define ROP_SPS					BIT(22)
+#define SOP_MRST				BIT(25)
+#define SOP_FUSE				BIT(26)
+#define SOP_ABG					BIT(27)
+#define SOP_AMB					BIT(28)
+#define SOP_RCK					BIT(29)
+#define SOP_A8M					BIT(30)
+#define XOP_BTCK				BIT(31)
+
+#define ANAD16V_EN				BIT(0)
+#define ANA8M					BIT(1)
+#define MACSLP					BIT(4)
+#define LOADER_CLK_EN				BIT(5)
+#define _80M_SSC_DIS				BIT(7)
+#define _80M_SSC_EN_HO				BIT(8)
+#define PHY_SSC_RSTB				BIT(9)
+#define SEC_CLK_EN				BIT(10)
+#define MAC_CLK_EN				BIT(11)
+#define SYS_CLK_EN				BIT(12)
+#define RING_CLK_EN				BIT(13)
+
+#define	BOOT_FROM_EEPROM			BIT(4)
+#define	EEPROM_EN				BIT(5)
+
+#define AFE_BGEN				BIT(0)
+#define AFE_MBEN				BIT(1)
+#define MAC_ID_EN				BIT(7)
+
+#define WLOCK_ALL				BIT(0)
+#define WLOCK_00				BIT(1)
+#define WLOCK_04				BIT(2)
+#define WLOCK_08				BIT(3)
+#define WLOCK_40				BIT(4)
+#define R_DIS_PRST_0				BIT(5)
+#define R_DIS_PRST_1				BIT(6)
+#define LOCK_ALL_EN				BIT(7)
+
+#define RF_EN					BIT(0)
+#define RF_RSTB					BIT(1)
+#define RF_SDMRSTB				BIT(2)
+
+#define LDA15_EN				BIT(0)
+#define LDA15_STBY				BIT(1)
+#define LDA15_OBUF				BIT(2)
+#define LDA15_REG_VOS				BIT(3)
+#define _LDA15_VOADJ(x)				(((x) & 0x7) << 4)
+
+#define LDV12_EN				BIT(0)
+#define LDV12_SDBY				BIT(1)
+#define LPLDO_HSM				BIT(2)
+#define LPLDO_LSM_DIS				BIT(3)
+#define _LDV12_VADJ(x)				(((x) & 0xF) << 4)
+
+#define XTAL_EN					BIT(0)
+#define XTAL_BSEL				BIT(1)
+#define _XTAL_BOSC(x)				(((x) & 0x3) << 2)
+#define _XTAL_CADJ(x)				(((x) & 0xF) << 4)
+#define XTAL_GATE_USB				BIT(8)
+#define _XTAL_USB_DRV(x)			(((x) & 0x3) << 9)
+#define XTAL_GATE_AFE				BIT(11)
+#define _XTAL_AFE_DRV(x)			(((x) & 0x3) << 12)
+#define XTAL_RF_GATE				BIT(14)
+#define _XTAL_RF_DRV(x)				(((x) & 0x3) << 15)
+#define XTAL_GATE_DIG				BIT(17)
+#define _XTAL_DIG_DRV(x)			(((x) & 0x3) << 18)
+#define XTAL_BT_GATE				BIT(20)
+#define _XTAL_BT_DRV(x)				(((x) & 0x3) << 21)
+#define _XTAL_GPIO(x)				(((x) & 0x7) << 23)
+
+#define CKDLY_AFE				BIT(26)
+#define CKDLY_USB				BIT(27)
+#define CKDLY_DIG				BIT(28)
+#define CKDLY_BT				BIT(29)
+
+#define APLL_EN					BIT(0)
+#define APLL_320_EN				BIT(1)
+#define APLL_FREF_SEL				BIT(2)
+#define APLL_EDGE_SEL				BIT(3)
+#define APLL_WDOGB				BIT(4)
+#define APLL_LPFEN				BIT(5)
+
+#define APLL_REF_CLK_13MHZ			0x1
+#define APLL_REF_CLK_19_2MHZ			0x2
+#define APLL_REF_CLK_20MHZ			0x3
+#define APLL_REF_CLK_25MHZ			0x4
+#define APLL_REF_CLK_26MHZ			0x5
+#define APLL_REF_CLK_38_4MHZ			0x6
+#define APLL_REF_CLK_40MHZ			0x7
+
+#define APLL_320EN				BIT(14)
+#define APLL_80EN				BIT(15)
+#define APLL_1MEN				BIT(24)
+
+#define ALD_EN					BIT(18)
+#define EF_PD					BIT(19)
+#define EF_FLAG					BIT(31)
+
+#define EF_TRPT					BIT(7)
+#define LDOE25_EN				BIT(31)
+
+#define RSM_EN					BIT(0)
+#define Timer_EN				BIT(4)
+
+#define TRSW0EN					BIT(2)
+#define TRSW1EN					BIT(3)
+#define EROM_EN					BIT(4)
+#define EnBT					BIT(5)
+#define EnUart					BIT(8)
+#define Uart_910				BIT(9)
+#define EnPMAC					BIT(10)
+#define SIC_SWRST				BIT(11)
+#define EnSIC					BIT(12)
+#define SIC_23					BIT(13)
+#define EnHDP					BIT(14)
+#define SIC_LBK					BIT(15)
+
+#define LED0PL					BIT(4)
+#define LED1PL					BIT(12)
+#define LED0DIS					BIT(7)
+
+#define MCUFWDL_EN				BIT(0)
+#define MCUFWDL_RDY				BIT(1)
+#define FWDL_ChkSum_rpt				BIT(2)
+#define MACINI_RDY				BIT(3)
+#define BBINI_RDY				BIT(4)
+#define RFINI_RDY				BIT(5)
+#define WINTINI_RDY				BIT(6)
+#define CPRST					BIT(23)
+
+#define XCLK_VLD				BIT(0)
+#define ACLK_VLD				BIT(1)
+#define UCLK_VLD				BIT(2)
+#define PCLK_VLD				BIT(3)
+#define PCIRSTB					BIT(4)
+#define V15_VLD					BIT(5)
+#define TRP_B15V_EN				BIT(7)
+#define SIC_IDLE				BIT(8)
+#define BD_MAC2					BIT(9)
+#define BD_MAC1					BIT(10)
+#define IC_MACPHY_MODE				BIT(11)
+#define PAD_HWPD_IDN				BIT(22)
+#define TRP_VAUX_EN				BIT(23)
+#define TRP_BT_EN				BIT(24)
+#define BD_PKG_SEL				BIT(25)
+#define BD_HCI_SEL				BIT(26)
+#define TYPE_ID					BIT(27)
+
+#define CHIP_VER_RTL_MASK			0xF000
+#define CHIP_VER_RTL_SHIFT			12
+
+#define REG_LBMODE				(REG_CR + 3)
+
+#define HCI_TXDMA_EN				BIT(0)
+#define HCI_RXDMA_EN				BIT(1)
+#define TXDMA_EN				BIT(2)
+#define RXDMA_EN				BIT(3)
+#define PROTOCOL_EN				BIT(4)
+#define SCHEDULE_EN				BIT(5)
+#define MACTXEN					BIT(6)
+#define MACRXEN					BIT(7)
+#define ENSWBCN					BIT(8)
+#define ENSEC					BIT(9)
+
+#define _NETTYPE(x)				(((x) & 0x3) << 16)
+#define MASK_NETTYPE				0x30000
+#define NT_NO_LINK				0x0
+#define NT_LINK_AD_HOC				0x1
+#define NT_LINK_AP				0x2
+#define NT_AS_AP				0x3
+
+#define _LBMODE(x)				(((x) & 0xF) << 24)
+#define MASK_LBMODE				0xF000000
+#define LOOPBACK_NORMAL				0x0
+#define LOOPBACK_IMMEDIATELY			0xB
+#define LOOPBACK_MAC_DELAY			0x3
+#define LOOPBACK_PHY				0x1
+#define LOOPBACK_DMA				0x7
+
+#define GET_RX_PAGE_SIZE(value)		((value) & 0xF)
+#define GET_TX_PAGE_SIZE(value)		(((value) & 0xF0) >> 4)
+#define _PSRX_MASK				0xF
+#define _PSTX_MASK				0xF0
+#define _PSRX(x)				(x)
+#define _PSTX(x)				((x) << 4)
+
+#define PBP_64					0x0
+#define PBP_128					0x1
+#define PBP_256					0x2
+#define PBP_512					0x3
+#define PBP_1024				0x4
+
+#define RXDMA_ARBBW_EN				BIT(0)
+#define RXSHFT_EN				BIT(1)
+#define RXDMA_AGG_EN				BIT(2)
+#define QS_VO_QUEUE				BIT(8)
+#define QS_VI_QUEUE				BIT(9)
+#define QS_BE_QUEUE				BIT(10)
+#define QS_BK_QUEUE				BIT(11)
+#define QS_MANAGER_QUEUE			BIT(12)
+#define QS_HIGH_QUEUE				BIT(13)
+
+#define HQSEL_VOQ				BIT(0)
+#define HQSEL_VIQ				BIT(1)
+#define HQSEL_BEQ				BIT(2)
+#define HQSEL_BKQ				BIT(3)
+#define HQSEL_MGTQ				BIT(4)
+#define HQSEL_HIQ				BIT(5)
+
+#define _TXDMA_HIQ_MAP(x)			(((x)&0x3) << 14)
+#define _TXDMA_MGQ_MAP(x)			(((x)&0x3) << 12)
+#define _TXDMA_BKQ_MAP(x)			(((x)&0x3) << 10)
+#define _TXDMA_BEQ_MAP(x)			(((x)&0x3) <<  8)
+#define _TXDMA_VIQ_MAP(x)			(((x)&0x3) <<  6)
+#define _TXDMA_VOQ_MAP(x)			(((x)&0x3) <<  4)
+
+#define QUEUE_LOW				1
+#define QUEUE_NORMAL				2
+#define QUEUE_HIGH				3
+
+#define _LLT_NO_ACTIVE				0x0
+#define _LLT_WRITE_ACCESS			0x1
+#define _LLT_READ_ACCESS			0x2
+
+#define _LLT_INIT_DATA(x)			((x) & 0xFF)
+#define _LLT_INIT_ADDR(x)			(((x) & 0xFF) << 8)
+#define _LLT_OP(x)				(((x) & 0x3) << 30)
+#define _LLT_OP_VALUE(x)			(((x) >> 30) & 0x3)
+
+#define BB_WRITE_READ_MASK			(BIT(31) | BIT(30))
+#define BB_WRITE_EN				BIT(30)
+#define BB_READ_EN				BIT(31)
+
+#define _HPQ(x)					((x) & 0xFF)
+#define _LPQ(x)					(((x) & 0xFF) << 8)
+#define _PUBQ(x)				(((x) & 0xFF) << 16)
+#define _NPQ(x)					((x) & 0xFF)
+
+#define HPQ_PUBLIC_DIS				BIT(24)
+#define LPQ_PUBLIC_DIS				BIT(25)
+#define LD_RQPN					BIT(31)
+
+#define BCN_VALID				BIT(16)
+#define BCN_HEAD(x)				(((x) & 0xFF) << 8)
+#define	BCN_HEAD_MASK				0xFF00
+
+#define BLK_DESC_NUM_SHIFT			4
+#define BLK_DESC_NUM_MASK			0xF
+
+#define DROP_DATA_EN				BIT(9)
+
+#define EN_AMPDU_RTY_NEW			BIT(7)
+
+#define _INIRTSMCS_SEL(x)			((x) & 0x3F)
+
+#define _SPEC_SIFS_CCK(x)			((x) & 0xFF)
+#define _SPEC_SIFS_OFDM(x)			(((x) & 0xFF) << 8)
+
+#define RATE_REG_BITMAP_ALL			0xFFFFF
+
+#define _RRSC_BITMAP(x)				((x) & 0xFFFFF)
+
+#define _RRSR_RSC(x)				(((x) & 0x3) << 21)
+#define RRSR_RSC_RESERVED			0x0
+#define RRSR_RSC_UPPER_SUBCHANNEL		0x1
+#define RRSR_RSC_LOWER_SUBCHANNEL		0x2
+#define RRSR_RSC_DUPLICATE_MODE			0x3
+
+#define USE_SHORT_G1				BIT(20)
+
+#define _AGGLMT_MCS0(x)				((x) & 0xF)
+#define _AGGLMT_MCS1(x)				(((x) & 0xF) << 4)
+#define _AGGLMT_MCS2(x)				(((x) & 0xF) << 8)
+#define _AGGLMT_MCS3(x)				(((x) & 0xF) << 12)
+#define _AGGLMT_MCS4(x)				(((x) & 0xF) << 16)
+#define _AGGLMT_MCS5(x)				(((x) & 0xF) << 20)
+#define _AGGLMT_MCS6(x)				(((x) & 0xF) << 24)
+#define _AGGLMT_MCS7(x)				(((x) & 0xF) << 28)
+
+#define	RETRY_LIMIT_SHORT_SHIFT			8
+#define	RETRY_LIMIT_LONG_SHIFT			0
+
+#define _DARF_RC1(x)				((x) & 0x1F)
+#define _DARF_RC2(x)				(((x) & 0x1F) << 8)
+#define _DARF_RC3(x)				(((x) & 0x1F) << 16)
+#define _DARF_RC4(x)				(((x) & 0x1F) << 24)
+#define _DARF_RC5(x)				((x) & 0x1F)
+#define _DARF_RC6(x)				(((x) & 0x1F) << 8)
+#define _DARF_RC7(x)				(((x) & 0x1F) << 16)
+#define _DARF_RC8(x)				(((x) & 0x1F) << 24)
+
+#define _RARF_RC1(x)				((x) & 0x1F)
+#define _RARF_RC2(x)				(((x) & 0x1F) << 8)
+#define _RARF_RC3(x)				(((x) & 0x1F) << 16)
+#define _RARF_RC4(x)				(((x) & 0x1F) << 24)
+#define _RARF_RC5(x)				((x) & 0x1F)
+#define _RARF_RC6(x)				(((x) & 0x1F) << 8)
+#define _RARF_RC7(x)				(((x) & 0x1F) << 16)
+#define _RARF_RC8(x)				(((x) & 0x1F) << 24)
+
+#define AC_PARAM_TXOP_LIMIT_OFFSET		16
+#define AC_PARAM_ECW_MAX_OFFSET			12
+#define AC_PARAM_ECW_MIN_OFFSET			8
+#define AC_PARAM_AIFS_OFFSET			0
+
+#define _AIFS(x)				(x)
+#define _ECW_MAX_MIN(x)				((x) << 8)
+#define _TXOP_LIMIT(x)				((x) << 16)
+
+#define _BCNIFS(x)				((x) & 0xFF)
+#define _BCNECW(x)				((((x) & 0xF)) << 8)
+
+#define _LRL(x)					((x) & 0x3F)
+#define _SRL(x)					(((x) & 0x3F) << 8)
+
+#define _SIFS_CCK_CTX(x)			((x) & 0xFF)
+#define _SIFS_CCK_TRX(x)			(((x) & 0xFF) << 8);
+
+#define _SIFS_OFDM_CTX(x)			((x) & 0xFF)
+#define _SIFS_OFDM_TRX(x)			(((x) & 0xFF) << 8);
+
+#define _TBTT_PROHIBIT_HOLD(x)			(((x) & 0xFF) << 8)
+
+#define DIS_EDCA_CNT_DWN			BIT(11)
+
+#define EN_MBSSID				BIT(1)
+#define EN_TXBCN_RPT				BIT(2)
+#define	EN_BCN_FUNCTION				BIT(3)
+
+#define TSFTR_RST				BIT(0)
+#define TSFTR1_RST				BIT(1)
+
+#define STOP_BCNQ				BIT(6)
+
+#define	DIS_TSF_UDT0_NORMAL_CHIP		BIT(4)
+#define	DIS_TSF_UDT0_TEST_CHIP			BIT(5)
+
+#define	AcmHw_HwEn				BIT(0)
+#define	AcmHw_BeqEn				BIT(1)
+#define	AcmHw_ViqEn				BIT(2)
+#define	AcmHw_VoqEn				BIT(3)
+#define	AcmHw_BeqStatus				BIT(4)
+#define	AcmHw_ViqStatus				BIT(5)
+#define	AcmHw_VoqStatus				BIT(6)
+
+#define APSDOFF					BIT(6)
+#define APSDOFF_STATUS				BIT(7)
+
+#define BW_20MHZ				BIT(2)
+
+#define RATE_BITMAP_ALL				0xFFFFF
+
+#define RATE_RRSR_CCK_ONLY_1M			0xFFFF1
+
+#define TSFRST					BIT(0)
+#define DIS_GCLK				BIT(1)
+#define PAD_SEL					BIT(2)
+#define PWR_ST					BIT(6)
+#define PWRBIT_OW_EN				BIT(7)
+#define ACRC					BIT(8)
+#define CFENDFORM				BIT(9)
+#define ICV					BIT(10)
+
+#define AAP					BIT(0)
+#define APM					BIT(1)
+#define AM					BIT(2)
+#define AB					BIT(3)
+#define ADD3					BIT(4)
+#define APWRMGT					BIT(5)
+#define CBSSID					BIT(6)
+#define CBSSID_DATA				BIT(6)
+#define CBSSID_BCN				BIT(7)
+#define ACRC32					BIT(8)
+#define AICV					BIT(9)
+#define ADF					BIT(11)
+#define ACF					BIT(12)
+#define AMF					BIT(13)
+#define HTC_LOC_CTRL				BIT(14)
+#define UC_DATA_EN				BIT(16)
+#define BM_DATA_EN				BIT(17)
+#define MFBEN					BIT(22)
+#define LSIGEN					BIT(23)
+#define EnMBID					BIT(24)
+#define APP_BASSN				BIT(27)
+#define APP_PHYSTS				BIT(28)
+#define APP_ICV					BIT(29)
+#define APP_MIC					BIT(30)
+#define APP_FCS					BIT(31)
+
+#define _MIN_SPACE(x)				((x) & 0x7)
+#define _SHORT_GI_PADDING(x)			(((x) & 0x1F) << 3)
+
+#define RXERR_TYPE_OFDM_PPDU			0
+#define RXERR_TYPE_OFDM_FALSE_ALARM		1
+#define	RXERR_TYPE_OFDM_MPDU_OK			2
+#define RXERR_TYPE_OFDM_MPDU_FAIL		3
+#define RXERR_TYPE_CCK_PPDU			4
+#define RXERR_TYPE_CCK_FALSE_ALARM		5
+#define RXERR_TYPE_CCK_MPDU_OK			6
+#define RXERR_TYPE_CCK_MPDU_FAIL		7
+#define RXERR_TYPE_HT_PPDU			8
+#define RXERR_TYPE_HT_FALSE_ALARM		9
+#define RXERR_TYPE_HT_MPDU_TOTAL		10
+#define RXERR_TYPE_HT_MPDU_OK			11
+#define RXERR_TYPE_HT_MPDU_FAIL			12
+#define RXERR_TYPE_RX_FULL_DROP			15
+
+#define RXERR_COUNTER_MASK			0xFFFFF
+#define RXERR_RPT_RST				BIT(27)
+#define _RXERR_RPT_SEL(type)			((type) << 28)
+
+#define	SCR_TxUseDK				BIT(0)
+#define	SCR_RxUseDK				BIT(1)
+#define	SCR_TxEncEnable				BIT(2)
+#define	SCR_RxDecEnable				BIT(3)
+#define	SCR_SKByA2				BIT(4)
+#define	SCR_NoSKMC				BIT(5)
+#define SCR_TXBCUSEDK				BIT(6)
+#define SCR_RXBCUSEDK				BIT(7)
+
+#define USB_IS_HIGH_SPEED			0
+#define USB_IS_FULL_SPEED			1
+#define USB_SPEED_MASK				BIT(5)
+
+#define USB_NORMAL_SIE_EP_MASK			0xF
+#define USB_NORMAL_SIE_EP_SHIFT			4
+
+#define USB_TEST_EP_MASK			0x30
+#define USB_TEST_EP_SHIFT			4
+
+#define USB_AGG_EN				BIT(3)
+
+#define MAC_ADDR_LEN				6
+#define LAST_ENTRY_OF_TX_PKT_BUFFER		255
+
+#define POLLING_LLT_THRESHOLD			20
+#define POLLING_READY_TIMEOUT_COUNT		1000
+
+#define	MAX_MSS_DENSITY_2T			0x13
+#define	MAX_MSS_DENSITY_1T			0x0A
+
+#define EPROM_CMD_OPERATING_MODE_MASK	((1<<7)|(1<<6))
+#define EPROM_CMD_CONFIG			0x3
+#define EPROM_CMD_LOAD				1
+
+#define	HWSET_MAX_SIZE_92S		HWSET_MAX_SIZE
+
+#define	HAL_8192C_HW_GPIO_WPS_BIT		BIT(2)
+
+#define	RPMAC_RESET				0x100
+#define	RPMAC_TXSTART				0x104
+#define	RPMAC_TXLEGACYSIG			0x108
+#define	RPMAC_TXHTSIG1				0x10c
+#define	RPMAC_TXHTSIG2				0x110
+#define	RPMAC_PHYDEBUG				0x114
+#define	RPMAC_TXPACKETNUM			0x118
+#define	RPMAC_TXIDLE				0x11c
+#define	RPMAC_TXMACHEADER0			0x120
+#define	RPMAC_TXMACHEADER1			0x124
+#define	RPMAC_TXMACHEADER2			0x128
+#define	RPMAC_TXMACHEADER3			0x12c
+#define	RPMAC_TXMACHEADER4			0x130
+#define	RPMAC_TXMACHEADER5			0x134
+#define	RPMAC_TXDADATYPE			0x138
+#define	RPMAC_TXRANDOMSEED			0x13c
+#define	RPMAC_CCKPLCPPREAMBLE			0x140
+#define	RPMAC_CCKPLCPHEADER			0x144
+#define	RPMAC_CCKCRC16				0x148
+#define	RPMAC_OFDMRXCRC32OK			0x170
+#define	RPMAC_OFDMRXCRC32Er			0x174
+#define	RPMAC_OFDMRXPARITYER			0x178
+#define	RPMAC_OFDMRXCRC8ER			0x17c
+#define	RPMAC_CCKCRXRC16ER			0x180
+#define	RPMAC_CCKCRXRC32ER			0x184
+#define	RPMAC_CCKCRXRC32OK			0x188
+#define	RPMAC_TXSTATUS				0x18c
+
+#define	RFPGA0_RFMOD				0x800
+
+#define	RFPGA0_TXINFO				0x804
+#define	RFPGA0_PSDFUNCTION			0x808
+
+#define	RFPGA0_TXGAINSTAGE			0x80c
+
+#define	RFPGA0_RFTIMING1			0x810
+#define	RFPGA0_RFTIMING2			0x814
+
+#define	RFPGA0_XA_HSSIPARAMETER1		0x820
+#define	RFPGA0_XA_HSSIPARAMETER2		0x824
+#define	RFPGA0_XB_HSSIPARAMETER1		0x828
+#define	RFPGA0_XB_HSSIPARAMETER2		0x82c
+
+#define	RFPGA0_XA_LSSIPARAMETER			0x840
+#define	RFPGA0_XB_LSSIPARAMETER			0x844
+
+#define	RFPGA0_RFWAKEUPPARAMETER		0x850
+#define	RFPGA0_RFSLEEPUPPARAMETER		0x854
+
+#define	RFPGA0_XAB_SWITCHCONTROL		0x858
+#define	RFPGA0_XCD_SWITCHCONTROL		0x85c
+
+#define	RFPGA0_XA_RFINTERFACEOE			0x860
+#define	RFPGA0_XB_RFINTERFACEOE			0x864
+
+#define	RFPGA0_XAB_RFINTERFACESW		0x870
+#define	RFPGA0_XCD_RFINTERFACESW		0x874
+
+#define	rFPGA0_XAB_RFPARAMETER			0x878
+#define	rFPGA0_XCD_RFPARAMETER			0x87c
+
+#define	RFPGA0_ANALOGPARAMETER1			0x880
+#define	RFPGA0_ANALOGPARAMETER2			0x884
+#define	RFPGA0_ANALOGPARAMETER3			0x888
+#define	RFPGA0_ANALOGPARAMETER4			0x88c
+
+#define	RFPGA0_XA_LSSIREADBACK			0x8a0
+#define	RFPGA0_XB_LSSIREADBACK			0x8a4
+#define	RFPGA0_XC_LSSIREADBACK			0x8a8
+#define	RFPGA0_XD_LSSIREADBACK			0x8ac
+
+#define	RFPGA0_PSDREPORT			0x8b4
+#define	TRANSCEIVEA_HSPI_READBACK		0x8b8
+#define	TRANSCEIVEB_HSPI_READBACK		0x8bc
+#define	RFPGA0_XAB_RFINTERFACERB		0x8e0
+#define	RFPGA0_XCD_RFINTERFACERB		0x8e4
+
+#define	RFPGA1_RFMOD				0x900
+
+#define	RFPGA1_TXBLOCK				0x904
+#define	RFPGA1_DEBUGSELECT			0x908
+#define	RFPGA1_TXINFO				0x90c
+
+#define	RCCK0_SYSTEM				0xa00
+
+#define	RCCK0_AFESETTING			0xa04
+#define	RCCK0_CCA				0xa08
+
+#define	RCCK0_RXAGC1				0xa0c
+#define	RCCK0_RXAGC2				0xa10
+
+#define	RCCK0_RXHP				0xa14
+
+#define	RCCK0_DSPPARAMETER1			0xa18
+#define	RCCK0_DSPPARAMETER2			0xa1c
+
+#define	RCCK0_TXFILTER1				0xa20
+#define	RCCK0_TXFILTER2				0xa24
+#define	RCCK0_DEBUGPORT				0xa28
+#define	RCCK0_FALSEALARMREPORT			0xa2c
+#define	RCCK0_TRSSIREPORT			0xa50
+#define	RCCK0_RXREPORT				0xa54
+#define	RCCK0_FACOUNTERLOWER			0xa5c
+#define	RCCK0_FACOUNTERUPPER			0xa58
+
+#define	ROFDM0_LSTF				0xc00
+
+#define	ROFDM0_TRXPATHENABLE			0xc04
+#define	ROFDM0_TRMUXPAR				0xc08
+#define	ROFDM0_TRSWISOLATION			0xc0c
+
+#define	ROFDM0_XARXAFE				0xc10
+#define	ROFDM0_XARXIQIMBALANCE			0xc14
+#define	ROFDM0_XBRXAFE				0xc18
+#define	ROFDM0_XBRXIQIMBALANCE			0xc1c
+#define	ROFDM0_XCRXAFE				0xc20
+#define	ROFDM0_XCRXIQIMBANLANCE			0xc24
+#define	ROFDM0_XDRXAFE				0xc28
+#define	ROFDM0_XDRXIQIMBALANCE			0xc2c
+
+#define	ROFDM0_RXDETECTOR1			0xc30
+#define	ROFDM0_RXDETECTOR2			0xc34
+#define	ROFDM0_RXDETECTOR3			0xc38
+#define	ROFDM0_RXDETECTOR4			0xc3c
+
+#define	ROFDM0_RXDSP				0xc40
+#define	ROFDM0_CFOANDDAGC			0xc44
+#define	ROFDM0_CCADROPTHRESHOLD			0xc48
+#define	ROFDM0_ECCATHRESHOLD			0xc4c
+
+#define	ROFDM0_XAAGCCORE1			0xc50
+#define	ROFDM0_XAAGCCORE2			0xc54
+#define	ROFDM0_XBAGCCORE1			0xc58
+#define	ROFDM0_XBAGCCORE2			0xc5c
+#define	ROFDM0_XCAGCCORE1			0xc60
+#define	ROFDM0_XCAGCCORE2			0xc64
+#define	ROFDM0_XDAGCCORE1			0xc68
+#define	ROFDM0_XDAGCCORE2			0xc6c
+
+#define	ROFDM0_AGCPARAMETER1			0xc70
+#define	ROFDM0_AGCPARAMETER2			0xc74
+#define	ROFDM0_AGCRSSITABLE			0xc78
+#define	ROFDM0_HTSTFAGC				0xc7c
+
+#define	ROFDM0_XATXIQIMBALANCE			0xc80
+#define	ROFDM0_XATXAFE				0xc84
+#define	ROFDM0_XBTXIQIMBALANCE			0xc88
+#define	ROFDM0_XBTXAFE				0xc8c
+#define	ROFDM0_XCTXIQIMBALANCE			0xc90
+#define	ROFDM0_XCTXAFE				0xc94
+#define	ROFDM0_XDTXIQIMBALANCE			0xc98
+#define	ROFDM0_XDTXAFE				0xc9c
+
+#define ROFDM0_RXIQEXTANTA			0xca0
+
+#define	ROFDM0_RXHPPARAMETER			0xce0
+#define	ROFDM0_TXPSEUDONOISEWGT			0xce4
+#define	ROFDM0_FRAMESYNC			0xcf0
+#define	ROFDM0_DFSREPORT			0xcf4
+#define	ROFDM0_TXCOEFF1				0xca4
+#define	ROFDM0_TXCOEFF2				0xca8
+#define	ROFDM0_TXCOEFF3				0xcac
+#define	ROFDM0_TXCOEFF4				0xcb0
+#define	ROFDM0_TXCOEFF5				0xcb4
+#define	ROFDM0_TXCOEFF6				0xcb8
+
+#define	ROFDM1_LSTF				0xd00
+#define	ROFDM1_TRXPATHENABLE			0xd04
+
+#define	ROFDM1_CF0				0xd08
+#define	ROFDM1_CSI1				0xd10
+#define	ROFDM1_SBD				0xd14
+#define	ROFDM1_CSI2				0xd18
+#define	ROFDM1_CFOTRACKING			0xd2c
+#define	ROFDM1_TRXMESAURE1			0xd34
+#define	ROFDM1_INTFDET				0xd3c
+#define	ROFDM1_PSEUDONOISESTATEAB		0xd50
+#define	ROFDM1_PSEUDONOISESTATECD		0xd54
+#define	ROFDM1_RXPSEUDONOISEWGT			0xd58
+
+#define	ROFDM_PHYCOUNTER1			0xda0
+#define	ROFDM_PHYCOUNTER2			0xda4
+#define	ROFDM_PHYCOUNTER3			0xda8
+
+#define	ROFDM_SHORTCFOAB			0xdac
+#define	ROFDM_SHORTCFOCD			0xdb0
+#define	ROFDM_LONGCFOAB				0xdb4
+#define	ROFDM_LONGCFOCD				0xdb8
+#define	ROFDM_TAILCF0AB				0xdbc
+#define	ROFDM_TAILCF0CD				0xdc0
+#define	ROFDM_PWMEASURE1			0xdc4
+#define	ROFDM_PWMEASURE2			0xdc8
+#define	ROFDM_BWREPORT				0xdcc
+#define	ROFDM_AGCREPORT				0xdd0
+#define	ROFDM_RXSNR				0xdd4
+#define	ROFDM_RXEVMCSI				0xdd8
+#define	ROFDM_SIGREPORT				0xddc
+
+#define	RTXAGC_A_RATE18_06			0xe00
+#define	RTXAGC_A_RATE54_24			0xe04
+#define	RTXAGC_A_CCK1_MCS32			0xe08
+#define	RTXAGC_A_MCS03_MCS00			0xe10
+#define	RTXAGC_A_MCS07_MCS04			0xe14
+#define	RTXAGC_A_MCS11_MCS08			0xe18
+#define	RTXAGC_A_MCS15_MCS12			0xe1c
+
+#define	RTXAGC_B_RATE18_06			0x830
+#define	RTXAGC_B_RATE54_24			0x834
+#define	RTXAGC_B_CCK1_55_MCS32			0x838
+#define	RTXAGC_B_MCS03_MCS00			0x83c
+#define	RTXAGC_B_MCS07_MCS04			0x848
+#define	RTXAGC_B_MCS11_MCS08			0x84c
+#define	RTXAGC_B_MCS15_MCS12			0x868
+#define	RTXAGC_B_CCK11_A_CCK2_11		0x86c
+
+#define	RZEBRA1_HSSIENABLE			0x0
+#define	RZEBRA1_TRXENABLE1			0x1
+#define	RZEBRA1_TRXENABLE2			0x2
+#define	RZEBRA1_AGC				0x4
+#define	RZEBRA1_CHARGEPUMP			0x5
+#define	RZEBRA1_CHANNEL				0x7
+
+#define	RZEBRA1_TXGAIN				0x8
+#define	RZEBRA1_TXLPF				0x9
+#define	RZEBRA1_RXLPF				0xb
+#define	RZEBRA1_RXHPFCORNER			0xc
+
+#define	RGLOBALCTRL				0
+#define	RRTL8256_TXLPF				19
+#define	RRTL8256_RXLPF				11
+#define	RRTL8258_TXLPF				0x11
+#define	RRTL8258_RXLPF				0x13
+#define	RRTL8258_RSSILPF			0xa
+
+#define	RF_AC					0x00
+
+#define	RF_IQADJ_G1				0x01
+#define	RF_IQADJ_G2				0x02
+#define	RF_POW_TRSW				0x05
+
+#define	RF_GAIN_RX				0x06
+#define	RF_GAIN_TX				0x07
+
+#define	RF_TXM_IDAC				0x08
+#define	RF_BS_IQGEN				0x0F
+
+#define	RF_MODE1				0x10
+#define	RF_MODE2				0x11
+
+#define	RF_RX_AGC_HP				0x12
+#define	RF_TX_AGC				0x13
+#define	RF_BIAS					0x14
+#define	RF_IPA					0x15
+#define	RF_POW_ABILITY				0x17
+#define	RF_MODE_AG				0x18
+#define	RRFCHANNEL				0x18
+#define	RF_CHNLBW				0x18
+#define	RF_TOP					0x19
+
+#define	RF_RX_G1				0x1A
+#define	RF_RX_G2				0x1B
+
+#define	RF_RX_BB2				0x1C
+#define	RF_RX_BB1				0x1D
+
+#define	RF_RCK1					0x1E
+#define	RF_RCK2					0x1F
+
+#define	RF_TX_G1				0x20
+#define	RF_TX_G2				0x21
+#define	RF_TX_G3				0x22
+
+#define	RF_TX_BB1				0x23
+#define	RF_T_METER				0x24
+
+#define	RF_SYN_G1				0x25
+#define	RF_SYN_G2				0x26
+#define	RF_SYN_G3				0x27
+#define	RF_SYN_G4				0x28
+#define	RF_SYN_G5				0x29
+#define	RF_SYN_G6				0x2A
+#define	RF_SYN_G7				0x2B
+#define	RF_SYN_G8				0x2C
+
+#define	RF_RCK_OS				0x30
+#define	RF_TXPA_G1				0x31
+#define	RF_TXPA_G2				0x32
+#define	RF_TXPA_G3				0x33
+
+#define	BBBRESETB				0x100
+#define	BGLOBALRESETB				0x200
+#define	BOFDMTXSTART				0x4
+#define	BCCKTXSTART				0x8
+#define	BCRC32DEBUG				0x100
+#define	BPMACLOOPBACK				0x10
+#define	BTXLSIG					0xffffff
+#define	BOFDMTXRATE				0xf
+#define	BOFDMTXRESERVED				0x10
+#define	BOFDMTXLENGTH				0x1ffe0
+#define	BOFDMTXPARITY				0x20000
+#define	BTXHTSIG1				0xffffff
+#define	BTXHTMCSRATE				0x7f
+#define	BTXHTBW					0x80
+#define	BTXHTLENGTH				0xffff00
+#define	BTXHTSIG2				0xffffff
+#define	BTXHTSMOOTHING				0x1
+#define	BTXHTSOUNDING				0x2
+#define	BTXHTRESERVED				0x4
+#define	BTXHTAGGREATION				0x8
+#define	BTXHTSTBC				0x30
+#define	BTXHTADVANCECODING			0x40
+#define	BTXHTSHORTGI				0x80
+#define	BTXHTNUMBERHT_LT	F		0x300
+#define	BTXHTCRC8				0x3fc00
+#define	BCOUNTERRESET				0x10000
+#define	BNUMOFOFDMTX				0xffff
+#define	BNUMOFCCKTX				0xffff0000
+#define	BTXIDLEINTERVAL				0xffff
+#define	BOFDMSERVICE				0xffff0000
+#define	BTXMACHEADER				0xffffffff
+#define	BTXDATAINIT				0xff
+#define	BTXHTMODE				0x100
+#define	BTXDATATYPE				0x30000
+#define	BTXRANDOMSEED				0xffffffff
+#define	BCCKTXPREAMBLE				0x1
+#define	BCCKTXSFD				0xffff0000
+#define	BCCKTXSIG				0xff
+#define	BCCKTXSERVICE				0xff00
+#define	BCCKLENGTHEXT				0x8000
+#define	BCCKTXLENGHT				0xffff0000
+#define	BCCKTXCRC16				0xffff
+#define	BCCKTXSTATUS				0x1
+#define	BOFDMTXSTATUS				0x2
+#define IS_BB_REG_OFFSET_92S(_Offset)		\
+	((_Offset >= 0x800) && (_Offset <= 0xfff))
+
+#define	BRFMOD					0x1
+#define	BJAPANMODE				0x2
+#define	BCCKTXSC				0x30
+#define	BCCKEN					0x1000000
+#define	BOFDMEN					0x2000000
+
+#define	BOFDMRXADCPHASE				0x10000
+#define	BOFDMTXDACPHASE				0x40000
+#define	BXATXAGC				0x3f
+
+#define	BXBTXAGC				0xf00
+#define	BXCTXAGC				0xf000
+#define	BXDTXAGC				0xf0000
+
+#define	BPASTART				0xf0000000
+#define	BTRSTART				0x00f00000
+#define	BRFSTART				0x0000f000
+#define	BBBSTART				0x000000f0
+#define	BBBCCKSTART				0x0000000f
+#define	BPAEND					0xf
+#define	BTREND					0x0f000000
+#define	BRFEND					0x000f0000
+#define	BCCAMASK				0x000000f0
+#define	BR2RCCAMASK				0x00000f00
+#define	BHSSI_R2TDELAY				0xf8000000
+#define	BHSSI_T2RDELAY				0xf80000
+#define	BCONTXHSSI				0x400
+#define	BIGFROMCCK				0x200
+#define	BAGCADDRESS				0x3f
+#define	BRXHPTX					0x7000
+#define	BRXHP2RX				0x38000
+#define	BRXHPCCKINI				0xc0000
+#define	BAGCTXCODE				0xc00000
+#define	BAGCRXCODE				0x300000
+
+#define	B3WIREDATALENGTH			0x800
+#define	B3WIREADDREAALENGTH			0x400
+
+#define	B3WIRERFPOWERDOWN			0x1
+#define	B5GPAPEPOLARITY				0x40000000
+#define	B2GPAPEPOLARITY				0x80000000
+#define	BRFSW_TXDEFAULTANT			0x3
+#define	BRFSW_TXOPTIONANT			0x30
+#define	BRFSW_RXDEFAULTANT			0x300
+#define	BRFSW_RXOPTIONANT			0x3000
+#define	BRFSI_3WIREDATA				0x1
+#define	BRFSI_3WIRECLOCK			0x2
+#define	BRFSI_3WIRELOAD				0x4
+#define	BRFSI_3WIRERW				0x8
+#define	BRFSI_3WIRE				0xf
+
+#define	BRFSI_RFENV				0x10
+
+#define	BRFSI_TRSW				0x20
+#define	BRFSI_TRSWB				0x40
+#define	BRFSI_ANTSW				0x100
+#define	BRFSI_ANTSWB				0x200
+#define	BRFSI_PAPE				0x400
+#define	BRFSI_PAPE5G				0x800
+#define	BBANDSELECT				0x1
+#define	BHTSIG2_GI				0x80
+#define	BHTSIG2_SMOOTHING			0x01
+#define	BHTSIG2_SOUNDING			0x02
+#define	BHTSIG2_AGGREATON			0x08
+#define	BHTSIG2_STBC				0x30
+#define	BHTSIG2_ADVCODING			0x40
+#define	BHTSIG2_NUMOFHTLTF			0x300
+#define	BHTSIG2_CRC8				0x3fc
+#define	BHTSIG1_MCS				0x7f
+#define	BHTSIG1_BANDWIDTH			0x80
+#define	BHTSIG1_HTLENGTH			0xffff
+#define	BLSIG_RATE				0xf
+#define	BLSIG_RESERVED				0x10
+#define	BLSIG_LENGTH				0x1fffe
+#define	BLSIG_PARITY				0x20
+#define	BCCKRXPHASE				0x4
+
+#define	BLSSIREADADDRESS			0x7f800000
+#define	BLSSIREADEDGE				0x80000000
+
+#define	BLSSIREADBACKDATA			0xfffff
+
+#define	BLSSIREADOKFLAG				0x1000
+#define	BCCKSAMPLERATE				0x8
+#define	BREGULATOR0STANDBY			0x1
+#define	BREGULATORPLLSTANDBY			0x2
+#define	BREGULATOR1STANDBY			0x4
+#define	BPLLPOWERUP				0x8
+#define	BDPLLPOWERUP				0x10
+#define	BDA10POWERUP				0x20
+#define	BAD7POWERUP				0x200
+#define	BDA6POWERUP				0x2000
+#define	BXTALPOWERUP				0x4000
+#define	B40MDCLKPOWERUP				0x8000
+#define	BDA6DEBUGMODE				0x20000
+#define	BDA6SWING				0x380000
+
+#define	BADCLKPHASE				0x4000000
+#define	B80MCLKDELAY				0x18000000
+#define	BAFEWATCHDOGENABLE			0x20000000
+
+#define	BXTALCAP01				0xc0000000
+#define	BXTALCAP23				0x3
+#define	BXTALCAP92X				0x0f000000
+#define BXTALCAP				0x0f000000
+
+#define	BINTDIFCLKENABLE			0x400
+#define	BEXTSIGCLKENABLE			0x800
+#define	BBANDGAP_MBIAS_POWERUP			0x10000
+#define	BAD11SH_GAIN				0xc0000
+#define	BAD11NPUT_RANGE				0x700000
+#define	BAD110P_CURRENT				0x3800000
+#define	BLPATH_LOOPBACK				0x4000000
+#define	BQPATH_LOOPBACK				0x8000000
+#define	BAFE_LOOPBACK				0x10000000
+#define	BDA10_SWING				0x7e0
+#define	BDA10_REVERSE				0x800
+#define	BDA_CLK_SOURCE				0x1000
+#define	BDA7INPUT_RANGE				0x6000
+#define	BDA7_GAIN				0x38000
+#define	BDA7OUTPUT_CM_MODE			0x40000
+#define	BDA7INPUT_CM_MODE			0x380000
+#define	BDA7CURRENT				0xc00000
+#define	BREGULATOR_ADJUST			0x7000000
+#define	BAD11POWERUP_ATTX			0x1
+#define	BDA10PS_ATTX				0x10
+#define	BAD11POWERUP_ATRX			0x100
+#define	BDA10PS_ATRX				0x1000
+#define	BCCKRX_AGC_FORMAT			0x200
+#define	BPSDFFT_SAMPLE_POINT			0xc000
+#define	BPSD_AVERAGE_NUM			0x3000
+#define	BIQPATH_CONTROL				0xc00
+#define	BPSD_FREQ				0x3ff
+#define	BPSD_ANTENNA_PATH			0x30
+#define	BPSD_IQ_SWITCH				0x40
+#define	BPSD_RX_TRIGGER				0x400000
+#define	BPSD_TX_TRIGGER				0x80000000
+#define	BPSD_SINE_TONE_SCALE			0x7f000000
+#define	BPSD_REPORT				0xffff
+
+#define	BOFDM_TXSC				0x30000000
+#define	BCCK_TXON				0x1
+#define	BOFDM_TXON				0x2
+#define	BDEBUG_PAGE				0xfff
+#define	BDEBUG_ITEM				0xff
+#define	BANTL					0x10
+#define	BANT_NONHT				0x100
+#define	BANT_HT1				0x1000
+#define	BANT_HT2				0x10000
+#define	BANT_HT1S1				0x100000
+#define	BANT_NONHTS1				0x1000000
+
+#define	BCCK_BBMODE				0x3
+#define	BCCK_TXPOWERSAVING			0x80
+#define	BCCK_RXPOWERSAVING			0x40
+
+#define	BCCK_SIDEBAND				0x10
+
+#define	BCCK_SCRAMBLE				0x8
+#define	BCCK_ANTDIVERSITY			0x8000
+#define	BCCK_CARRIER_RECOVERY			0x4000
+#define	BCCK_TXRATE				0x3000
+#define	BCCK_DCCANCEL				0x0800
+#define	BCCK_ISICANCEL				0x0400
+#define	BCCK_MATCH_FILTER			0x0200
+#define	BCCK_EQUALIZER				0x0100
+#define	BCCK_PREAMBLE_DETECT			0x800000
+#define	BCCK_FAST_FALSECCA			0x400000
+#define	BCCK_CH_ESTSTART			0x300000
+#define	BCCK_CCA_COUNT				0x080000
+#define	BCCK_CS_LIM				0x070000
+#define	BCCK_BIST_MODE				0x80000000
+#define	BCCK_CCAMASK				0x40000000
+#define	BCCK_TX_DAC_PHASE			0x4
+#define	BCCK_RX_ADC_PHASE			0x20000000
+#define	BCCKR_CP_MODE				0x0100
+#define	BCCK_TXDC_OFFSET			0xf0
+#define	BCCK_RXDC_OFFSET			0xf
+#define	BCCK_CCA_MODE				0xc000
+#define	BCCK_FALSECS_LIM			0x3f00
+#define	BCCK_CS_RATIO				0xc00000
+#define	BCCK_CORGBIT_SEL			0x300000
+#define	BCCK_PD_LIM				0x0f0000
+#define	BCCK_NEWCCA				0x80000000
+#define	BCCK_RXHP_OF_IG				0x8000
+#define	BCCK_RXIG				0x7f00
+#define	BCCK_LNA_POLARITY			0x800000
+#define	BCCK_RX1ST_BAIN				0x7f0000
+#define	BCCK_RF_EXTEND				0x20000000
+#define	BCCK_RXAGC_SATLEVEL			0x1f000000
+#define	BCCK_RXAGC_SATCOUNT			0xe0
+#define	bCCKRxRFSettle				0x1f
+#define	BCCK_FIXED_RXAGC			0x8000
+#define	BCCK_ANTENNA_POLARITY			0x2000
+#define	BCCK_TXFILTER_TYPE			0x0c00
+#define	BCCK_RXAGC_REPORTTYPE			0x0300
+#define	BCCK_RXDAGC_EN				0x80000000
+#define	BCCK_RXDAGC_PERIOD			0x20000000
+#define	BCCK_RXDAGC_SATLEVEL			0x1f000000
+#define	BCCK_TIMING_RECOVERY			0x800000
+#define	BCCK_TXC0				0x3f0000
+#define	BCCK_TXC1				0x3f000000
+#define	BCCK_TXC2				0x3f
+#define	BCCK_TXC3				0x3f00
+#define	BCCK_TXC4				0x3f0000
+#define	BCCK_TXC5				0x3f000000
+#define	BCCK_TXC6				0x3f
+#define	BCCK_TXC7				0x3f00
+#define	BCCK_DEBUGPORT				0xff0000
+#define	BCCK_DAC_DEBUG				0x0f000000
+#define	BCCK_FALSEALARM_ENABLE			0x8000
+#define	BCCK_FALSEALARM_READ			0x4000
+#define	BCCK_TRSSI				0x7f
+#define	BCCK_RXAGC_REPORT			0xfe
+#define	BCCK_RXREPORT_ANTSEL			0x80000000
+#define	BCCK_RXREPORT_MFOFF			0x40000000
+#define	BCCK_RXREPORT_SQLOSS			0x20000000
+#define	BCCK_RXREPORT_PKTLOSS			0x10000000
+#define	BCCK_RXREPORT_LOCKEDBIT			0x08000000
+#define	BCCK_RXREPORT_RATEERROR			0x04000000
+#define	BCCK_RXREPORT_RXRATE			0x03000000
+#define	BCCK_RXFA_COUNTER_LOWER			0xff
+#define	BCCK_RXFA_COUNTER_UPPER			0xff000000
+#define	BCCK_RXHPAGC_START			0xe000
+#define	BCCK_RXHPAGC_FINAL			0x1c00
+#define	BCCK_RXFALSEALARM_ENABLE		0x8000
+#define	BCCK_FACOUNTER_FREEZE			0x4000
+#define	BCCK_TXPATH_SEL				0x10000000
+#define	BCCK_DEFAULT_RXPATH			0xc000000
+#define	BCCK_OPTION_RXPATH			0x3000000
+
+#define	BNUM_OFSTF				0x3
+#define	BSHIFT_L				0xc0
+#define	BGI_TH					0xc
+#define	BRXPATH_A				0x1
+#define	BRXPATH_B				0x2
+#define	BRXPATH_C				0x4
+#define	BRXPATH_D				0x8
+#define	BTXPATH_A				0x1
+#define	BTXPATH_B				0x2
+#define	BTXPATH_C				0x4
+#define	BTXPATH_D				0x8
+#define	BTRSSI_FREQ				0x200
+#define	BADC_BACKOFF				0x3000
+#define	BDFIR_BACKOFF				0xc000
+#define	BTRSSI_LATCH_PHASE			0x10000
+#define	BRX_LDC_OFFSET				0xff
+#define	BRX_QDC_OFFSET				0xff00
+#define	BRX_DFIR_MODE				0x1800000
+#define	BRX_DCNF_TYPE				0xe000000
+#define	BRXIQIMB_A				0x3ff
+#define	BRXIQIMB_B				0xfc00
+#define	BRXIQIMB_C				0x3f0000
+#define	BRXIQIMB_D				0xffc00000
+#define	BDC_DC_NOTCH				0x60000
+#define	BRXNB_NOTCH				0x1f000000
+#define	BPD_TH					0xf
+#define	BPD_TH_OPT2				0xc000
+#define	BPWED_TH				0x700
+#define	BIFMF_WIN_L				0x800
+#define	BPD_OPTION				0x1000
+#define	BMF_WIN_L				0xe000
+#define	BBW_SEARCH_L				0x30000
+#define	BWIN_ENH_L				0xc0000
+#define	BBW_TH					0x700000
+#define	BED_TH2					0x3800000
+#define	BBW_OPTION				0x4000000
+#define	BRADIO_TH				0x18000000
+#define	BWINDOW_L				0xe0000000
+#define	BSBD_OPTION				0x1
+#define	BFRAME_TH				0x1c
+#define	BFS_OPTION				0x60
+#define	BDC_SLOPE_CHECK				0x80
+#define	BFGUARD_COUNTER_DC_L			0xe00
+#define	BFRAME_WEIGHT_SHORT			0x7000
+#define	BSUB_TUNE				0xe00000
+#define	BFRAME_DC_LENGTH			0xe000000
+#define	BSBD_START_OFFSET			0x30000000
+#define	BFRAME_TH_2				0x7
+#define	BFRAME_GI2_TH				0x38
+#define	BGI2_SYNC_EN				0x40
+#define	BSARCH_SHORT_EARLY			0x300
+#define	BSARCH_SHORT_LATE			0xc00
+#define	BSARCH_GI2_LATE				0x70000
+#define	BCFOANTSUM				0x1
+#define	BCFOACC					0x2
+#define	BCFOSTARTOFFSET				0xc
+#define	BCFOLOOPBACK				0x70
+#define	BCFOSUMWEIGHT				0x80
+#define	BDAGCENABLE				0x10000
+#define	BTXIQIMB_A				0x3ff
+#define	BTXIQIMB_b				0xfc00
+#define	BTXIQIMB_C				0x3f0000
+#define	BTXIQIMB_D				0xffc00000
+#define	BTXIDCOFFSET				0xff
+#define	BTXIQDCOFFSET				0xff00
+#define	BTXDFIRMODE				0x10000
+#define	BTXPESUDO_NOISEON			0x4000000
+#define	BTXPESUDO_NOISE_A			0xff
+#define	BTXPESUDO_NOISE_B			0xff00
+#define	BTXPESUDO_NOISE_C			0xff0000
+#define	BTXPESUDO_NOISE_D			0xff000000
+#define	BCCA_DROPOPTION				0x20000
+#define	BCCA_DROPTHRES				0xfff00000
+#define	BEDCCA_H				0xf
+#define	BEDCCA_L				0xf0
+#define	BLAMBDA_ED				0x300
+#define	BRX_INITIALGAIN				0x7f
+#define	BRX_ANTDIV_EN				0x80
+#define	BRX_AGC_ADDRESS_FOR_LNA			0x7f00
+#define	BRX_HIGHPOWER_FLOW			0x8000
+#define	BRX_AGC_FREEZE_THRES			0xc0000
+#define	BRX_FREEZESTEP_AGC1			0x300000
+#define	BRX_FREEZESTEP_AGC2			0xc00000
+#define	BRX_FREEZESTEP_AGC3			0x3000000
+#define	BRX_FREEZESTEP_AGC0			0xc000000
+#define	BRXRSSI_CMP_EN				0x10000000
+#define	BRXQUICK_AGCEN				0x20000000
+#define	BRXAGC_FREEZE_THRES_MODE		0x40000000
+#define	BRX_OVERFLOW_CHECKTYPE			0x80000000
+#define	BRX_AGCSHIFT				0x7f
+#define	BTRSW_TRI_ONLY				0x80
+#define	BPOWER_THRES				0x300
+#define	BRXAGC_EN				0x1
+#define	BRXAGC_TOGETHER_EN			0x2
+#define	BRXAGC_MIN				0x4
+#define	BRXHP_INI				0x7
+#define	BRXHP_TRLNA				0x70
+#define	BRXHP_RSSI				0x700
+#define	BRXHP_BBP1				0x7000
+#define	BRXHP_BBP2				0x70000
+#define	BRXHP_BBP3				0x700000
+#define	BRSSI_H					0x7f0000
+#define	BRSSI_GEN				0x7f000000
+#define	BRXSETTLE_TRSW				0x7
+#define	BRXSETTLE_LNA				0x38
+#define	BRXSETTLE_RSSI				0x1c0
+#define	BRXSETTLE_BBP				0xe00
+#define	BRXSETTLE_RXHP				0x7000
+#define	BRXSETTLE_ANTSW_RSSI			0x38000
+#define	BRXSETTLE_ANTSW				0xc0000
+#define	BRXPROCESS_TIME_DAGC			0x300000
+#define	BRXSETTLE_HSSI				0x400000
+#define	BRXPROCESS_TIME_BBPPW			0x800000
+#define	BRXANTENNA_POWER_SHIFT			0x3000000
+#define	BRSSI_TABLE_SELECT			0xc000000
+#define	BRXHP_FINAL				0x7000000
+#define	BRXHPSETTLE_BBP				0x7
+#define	BRXHTSETTLE_HSSI			0x8
+#define	BRXHTSETTLE_RXHP			0x70
+#define	BRXHTSETTLE_BBPPW			0x80
+#define	BRXHTSETTLE_IDLE			0x300
+#define	BRXHTSETTLE_RESERVED			0x1c00
+#define	BRXHT_RXHP_EN				0x8000
+#define	BRXAGC_FREEZE_THRES			0x30000
+#define	BRXAGC_TOGETHEREN			0x40000
+#define	BRXHTAGC_MIN				0x80000
+#define	BRXHTAGC_EN				0x100000
+#define	BRXHTDAGC_EN				0x200000
+#define	BRXHT_RXHP_BBP				0x1c00000
+#define	BRXHT_RXHP_FINAL			0xe0000000
+#define	BRXPW_RADIO_TH				0x3
+#define	BRXPW_RADIO_EN				0x4
+#define	BRXMF_HOLD				0x3800
+#define	BRXPD_DELAY_TH1				0x38
+#define	BRXPD_DELAY_TH2				0x1c0
+#define	BRXPD_DC_COUNT_MAX			0x600
+#define	BRXPD_DELAY_TH				0x8000
+#define	BRXPROCESS_DELAY			0xf0000
+#define	BRXSEARCHRANGE_GI2_EARLY		0x700000
+#define	BRXFRAME_FUARD_COUNTER_L		0x3800000
+#define	BRXSGI_GUARD_L				0xc000000
+#define	BRXSGI_SEARCH_L				0x30000000
+#define	BRXSGI_TH				0xc0000000
+#define	BDFSCNT0				0xff
+#define	BDFSCNT1				0xff00
+#define	BDFSFLAG				0xf0000
+#define	BMF_WEIGHT_SUM				0x300000
+#define	BMINIDX_TH				0x7f000000
+#define	BDAFORMAT				0x40000
+#define	BTXCH_EMU_ENABLE			0x01000000
+#define	BTRSW_ISOLATION_A			0x7f
+#define	BTRSW_ISOLATION_B			0x7f00
+#define	BTRSW_ISOLATION_C			0x7f0000
+#define	BTRSW_ISOLATION_D			0x7f000000
+#define	BEXT_LNA_GAIN				0x7c00
+
+#define	BSTBC_EN				0x4
+#define	BANTENNA_MAPPING			0x10
+#define	BNSS					0x20
+#define	BCFO_ANTSUM_ID				0x200
+#define	BPHY_COUNTER_RESET			0x8000000
+#define	BCFO_REPORT_GET				0x4000000
+#define	BOFDM_CONTINUE_TX			0x10000000
+#define	BOFDM_SINGLE_CARRIER			0x20000000
+#define	BOFDM_SINGLE_TONE			0x40000000
+#define	BHT_DETECT				0x100
+#define	BCFOEN					0x10000
+#define	BCFOVALUE				0xfff00000
+#define	BSIGTONE_RE				0x3f
+#define	BSIGTONE_IM				0x7f00
+#define	BCOUNTER_CCA				0xffff
+#define	BCOUNTER_PARITYFAIL			0xffff0000
+#define	BCOUNTER_RATEILLEGAL			0xffff
+#define	BCOUNTER_CRC8FAIL			0xffff0000
+#define	BCOUNTER_MCSNOSUPPORT			0xffff
+#define	BCOUNTER_FASTSYNC			0xffff
+#define	BSHORTCFO				0xfff
+#define	BSHORTCFOT_LENGTH			12
+#define	BSHORTCFOF_LENGTH			11
+#define	BLONGCFO				0x7ff
+#define	BLONGCFOT_LENGTH			11
+#define	BLONGCFOF_LENGTH			11
+#define	BTAILCFO				0x1fff
+#define	BTAILCFOT_LENGTH			13
+#define	BTAILCFOF_LENGTH			12
+#define	BNOISE_EN_PWDB				0xffff
+#define	BCC_POWER_DB				0xffff0000
+#define	BMOISE_PWDB				0xffff
+#define	BPOWERMEAST_LENGTH			10
+#define	BPOWERMEASF_LENGTH			3
+#define	BRX_HT_BW				0x1
+#define	BRXSC					0x6
+#define	BRX_HT					0x8
+#define	BNB_INTF_DET_ON				0x1
+#define	BINTF_WIN_LEN_CFG			0x30
+#define	BNB_INTF_TH_CFG				0x1c0
+#define	BRFGAIN					0x3f
+#define	BTABLESEL				0x40
+#define	BTRSW					0x80
+#define	BRXSNR_A				0xff
+#define	BRXSNR_B				0xff00
+#define	BRXSNR_C				0xff0000
+#define	BRXSNR_D				0xff000000
+#define	BSNR_EVMT_LENGTH			8
+#define	BSNR_EVMF_LENGTH			1
+#define	BCSI1ST					0xff
+#define	BCSI2ND					0xff00
+#define	BRXEVM1ST				0xff0000
+#define	BRXEVM2ND				0xff000000
+#define	BSIGEVM					0xff
+#define	BPWDB					0xff00
+#define	BSGIEN					0x10000
+
+#define	BSFACTOR_QMA1				0xf
+#define	BSFACTOR_QMA2				0xf0
+#define	BSFACTOR_QMA3				0xf00
+#define	BSFACTOR_QMA4				0xf000
+#define	BSFACTOR_QMA5				0xf0000
+#define	BSFACTOR_QMA6				0xf0000
+#define	BSFACTOR_QMA7				0xf00000
+#define	BSFACTOR_QMA8				0xf000000
+#define	BSFACTOR_QMA9				0xf0000000
+#define	BCSI_SCHEME				0x100000
+
+#define	BNOISE_LVL_TOP_SET			0x3
+#define	BCHSMOOTH				0x4
+#define	BCHSMOOTH_CFG1				0x38
+#define	BCHSMOOTH_CFG2				0x1c0
+#define	BCHSMOOTH_CFG3				0xe00
+#define	BCHSMOOTH_CFG4				0x7000
+#define	BMRCMODE				0x800000
+#define	BTHEVMCFG				0x7000000
+
+#define	BLOOP_FIT_TYPE				0x1
+#define	BUPD_CFO				0x40
+#define	BUPD_CFO_OFFDATA			0x80
+#define	BADV_UPD_CFO				0x100
+#define	BADV_TIME_CTRL				0x800
+#define	BUPD_CLKO				0x1000
+#define	BFC					0x6000
+#define	BTRACKING_MODE				0x8000
+#define	BPHCMP_ENABLE				0x10000
+#define	BUPD_CLKO_LTF				0x20000
+#define	BCOM_CH_CFO				0x40000
+#define	BCSI_ESTI_MODE				0x80000
+#define	BADV_UPD_EQZ				0x100000
+#define	BUCHCFG					0x7000000
+#define	BUPDEQZ					0x8000000
+
+#define	BRX_PESUDO_NOISE_ON			0x20000000
+#define	BRX_PESUDO_NOISE_A			0xff
+#define	BRX_PESUDO_NOISE_B			0xff00
+#define	BRX_PESUDO_NOISE_C			0xff0000
+#define	BRX_PESUDO_NOISE_D			0xff000000
+#define	BRX_PESUDO_NOISESTATE_A			0xffff
+#define	BRX_PESUDO_NOISESTATE_B			0xffff0000
+#define	BRX_PESUDO_NOISESTATE_C			0xffff
+#define	BRX_PESUDO_NOISESTATE_D			0xffff0000
+
+#define	BZEBRA1_HSSIENABLE			0x8
+#define	BZEBRA1_TRXCONTROL			0xc00
+#define	BZEBRA1_TRXGAINSETTING			0x07f
+#define	BZEBRA1_RXCOUNTER			0xc00
+#define	BZEBRA1_TXCHANGEPUMP			0x38
+#define	BZEBRA1_RXCHANGEPUMP			0x7
+#define	BZEBRA1_CHANNEL_NUM			0xf80
+#define	BZEBRA1_TXLPFBW				0x400
+#define	BZEBRA1_RXLPFBW				0x600
+
+#define	BRTL8256REG_MODE_CTRL1			0x100
+#define	BRTL8256REG_MODE_CTRL0			0x40
+#define	BRTL8256REG_TXLPFBW			0x18
+#define	BRTL8256REG_RXLPFBW			0x600
+
+#define	BRTL8258_TXLPFBW			0xc
+#define	BRTL8258_RXLPFBW			0xc00
+#define	BRTL8258_RSSILPFBW			0xc0
+
+#define	BBYTE0					0x1
+#define	BBYTE1					0x2
+#define	BBYTE2					0x4
+#define	BBYTE3					0x8
+#define	BWORD0					0x3
+#define	BWORD1					0xc
+#define	BWORD					0xf
+
+#define	MASKBYTE0				0xff
+#define	MASKBYTE1				0xff00
+#define	MASKBYTE2				0xff0000
+#define	MASKBYTE3				0xff000000
+#define	MASKHWORD				0xffff0000
+#define	MASKLWORD				0x0000ffff
+#define	MASKDWORD				0xffffffff
+#define	MASK12BITS				0xfff
+#define	MASKH4BITS				0xf0000000
+#define MASKOFDM_D				0xffc00000
+#define	MASKCCK					0x3f3f3f3f
+
+#define	MASK4BITS				0x0f
+#define	MASK20BITS				0xfffff
+#define RFREG_OFFSET_MASK			0xfffff
+
+#define	BENABLE					0x1
+#define	BDISABLE				0x0
+
+#define	LEFT_ANTENNA				0x0
+#define	RIGHT_ANTENNA				0x1
+
+#define	TCHECK_TXSTATUS				500
+#define	TUPDATE_RXCOUNTER			100
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c b/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c
new file mode 100644
index 00000000000..ffd8e04c402
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/rf.c
@@ -0,0 +1,523 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+
+static bool _rtl92c_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
+
+void rtl92c_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	switch (bandwidth) {
+	case HT_CHANNEL_WIDTH_20:
+		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+					     0xfffff3ff) | 0x0400);
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+			      rtlphy->rfreg_chnlval[0]);
+		break;
+	case HT_CHANNEL_WIDTH_20_40:
+		rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+					     0xfffff3ff));
+		rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+			      rtlphy->rfreg_chnlval[0]);
+		break;
+	default:
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("unknown bandwidth: %#X\n", bandwidth));
+		break;
+	}
+}
+
+void rtl92c_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+				       u8 *ppowerlevel)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 tx_agc[2] = {0, 0}, tmpval;
+	bool turbo_scanoff = false;
+	u8 idx1, idx2;
+	u8 *ptr;
+
+	if (rtlefuse->eeprom_regulatory != 0)
+		turbo_scanoff = true;
+
+	if (mac->act_scanning == true) {
+		tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
+		tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
+
+		if (turbo_scanoff) {
+			for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+				tx_agc[idx1] = ppowerlevel[idx1] |
+				    (ppowerlevel[idx1] << 8) |
+				    (ppowerlevel[idx1] << 16) |
+				    (ppowerlevel[idx1] << 24);
+			}
+		}
+	} else {
+		for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+			tx_agc[idx1] = ppowerlevel[idx1] |
+			    (ppowerlevel[idx1] << 8) |
+			    (ppowerlevel[idx1] << 16) |
+			    (ppowerlevel[idx1] << 24);
+		}
+
+		if (rtlefuse->eeprom_regulatory == 0) {
+			tmpval =
+			    (rtlphy->mcs_txpwrlevel_origoffset[0][6]) +
+			    (rtlphy->mcs_txpwrlevel_origoffset[0][7] <<
+			     8);
+			tx_agc[RF90_PATH_A] += tmpval;
+
+			tmpval = (rtlphy->mcs_txpwrlevel_origoffset[0][14]) +
+				 (rtlphy->mcs_txpwrlevel_origoffset[0][15] <<
+				 24);
+			tx_agc[RF90_PATH_B] += tmpval;
+		}
+	}
+
+	for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+		ptr = (u8 *) (&(tx_agc[idx1]));
+		for (idx2 = 0; idx2 < 4; idx2++) {
+			if (*ptr > RF6052_MAX_TX_PWR)
+				*ptr = RF6052_MAX_TX_PWR;
+			ptr++;
+		}
+	}
+
+	tmpval = tx_agc[RF90_PATH_A] & 0xff;
+	rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		("CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_A_CCK1_MCS32));
+
+	tmpval = tx_agc[RF90_PATH_A] >> 8;
+
+	if (mac->mode == WIRELESS_MODE_B)
+		tmpval = tmpval & 0xff00ffff;
+
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		("CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK11_A_CCK2_11));
+
+	tmpval = tx_agc[RF90_PATH_B] >> 24;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		("CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK11_A_CCK2_11));
+
+	tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff;
+	rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval);
+
+	RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+		("CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+		 RTXAGC_B_CCK1_55_MCS32));
+}
+
+static void rtl92c_phy_get_power_base(struct ieee80211_hw *hw,
+				      u8 *ppowerlevel, u8 channel,
+				      u32 *ofdmbase, u32 *mcsbase)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u32 powerBase0, powerBase1;
+	u8 legacy_pwrdiff, ht20_pwrdiff;
+	u8 i, powerlevel[2];
+
+	for (i = 0; i < 2; i++) {
+		powerlevel[i] = ppowerlevel[i];
+		legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff[i][channel - 1];
+		powerBase0 = powerlevel[i] + legacy_pwrdiff;
+
+		powerBase0 = (powerBase0 << 24) | (powerBase0 << 16) |
+		    (powerBase0 << 8) | powerBase0;
+		*(ofdmbase + i) = powerBase0;
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			(" [OFDM power base index rf(%c) = 0x%x]\n",
+			 ((i == 0) ? 'A' : 'B'), *(ofdmbase + i)));
+	}
+
+	for (i = 0; i < 2; i++) {
+		if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
+			ht20_pwrdiff = rtlefuse->txpwr_ht20diff[i][channel - 1];
+			powerlevel[i] += ht20_pwrdiff;
+		}
+		powerBase1 = powerlevel[i];
+		powerBase1 = (powerBase1 << 24) |
+		    (powerBase1 << 16) | (powerBase1 << 8) | powerBase1;
+
+		*(mcsbase + i) = powerBase1;
+
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			(" [MCS power base index rf(%c) = 0x%x]\n",
+			 ((i == 0) ? 'A' : 'B'), *(mcsbase + i)));
+	}
+}
+
+static void _rtl92c_get_txpower_writeval_by_regulatory(struct ieee80211_hw *hw,
+						       u8 channel, u8 index,
+						       u32 *powerBase0,
+						       u32 *powerBase1,
+						       u32 *p_outwriteval)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+	u8 i, chnlgroup, pwr_diff_limit[4];
+	u32 writeVal, customer_limit, rf;
+
+	for (rf = 0; rf < 2; rf++) {
+		switch (rtlefuse->eeprom_regulatory) {
+		case 0:
+			chnlgroup = 0;
+
+			writeVal =
+			    rtlphy->mcs_txpwrlevel_origoffset[chnlgroup][index +
+			    (rf ? 8 : 0)]
+			    + ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				("RTK better performance, "
+				 "writeVal(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeVal));
+			break;
+		case 1:
+			if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+				writeVal = ((index < 2) ? powerBase0[rf] :
+					    powerBase1[rf]);
+
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					("Realtek regulatory, 40MHz, "
+					 "writeVal(%c) = 0x%x\n",
+					 ((rf == 0) ? 'A' : 'B'), writeVal));
+			} else {
+				if (rtlphy->pwrgroup_cnt == 1)
+					chnlgroup = 0;
+				if (rtlphy->pwrgroup_cnt >= 3) {
+					if (channel <= 3)
+						chnlgroup = 0;
+					else if (channel >= 4 && channel <= 9)
+						chnlgroup = 1;
+					else if (channel > 9)
+						chnlgroup = 2;
+					if (rtlphy->pwrgroup_cnt == 4)
+						chnlgroup++;
+				}
+
+				writeVal =
+				    rtlphy->mcs_txpwrlevel_origoffset[chnlgroup]
+				    [index + (rf ? 8 : 0)] + ((index < 2) ?
+							      powerBase0[rf] :
+							      powerBase1[rf]);
+
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					("Realtek regulatory, 20MHz, "
+					 "writeVal(%c) = 0x%x\n",
+					 ((rf == 0) ? 'A' : 'B'), writeVal));
+			}
+			break;
+		case 2:
+			writeVal =
+			    ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				("Better regulatory, "
+				 "writeVal(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeVal));
+			break;
+		case 3:
+			chnlgroup = 0;
+
+			if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					("customer's limit, 40MHz "
+					 "rf(%c) = 0x%x\n",
+					 ((rf == 0) ? 'A' : 'B'),
+					 rtlefuse->pwrgroup_ht40[rf][channel -
+								     1]));
+			} else {
+				RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+					("customer's limit, 20MHz "
+					 "rf(%c) = 0x%x\n",
+					 ((rf == 0) ? 'A' : 'B'),
+					 rtlefuse->pwrgroup_ht20[rf][channel -
+								     1]));
+			}
+			for (i = 0; i < 4; i++) {
+				pwr_diff_limit[i] =
+				    (u8) ((rtlphy->mcs_txpwrlevel_origoffset
+					  [chnlgroup][index +
+					  (rf ? 8 : 0)] & (0x7f << (i * 8))) >>
+					  (i * 8));
+
+				if (rtlphy->current_chan_bw ==
+				    HT_CHANNEL_WIDTH_20_40) {
+					if (pwr_diff_limit[i] >
+					    rtlefuse->
+					    pwrgroup_ht40[rf][channel - 1])
+						pwr_diff_limit[i] =
+						    rtlefuse->pwrgroup_ht40[rf]
+						    [channel - 1];
+				} else {
+					if (pwr_diff_limit[i] >
+					    rtlefuse->
+					    pwrgroup_ht20[rf][channel - 1])
+						pwr_diff_limit[i] =
+						    rtlefuse->pwrgroup_ht20[rf]
+						    [channel - 1];
+				}
+			}
+
+			customer_limit = (pwr_diff_limit[3] << 24) |
+			    (pwr_diff_limit[2] << 16) |
+			    (pwr_diff_limit[1] << 8) | (pwr_diff_limit[0]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				("Customer's limit rf(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), customer_limit));
+
+			writeVal = customer_limit +
+			    ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				("Customer, writeVal rf(%c)= 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeVal));
+			break;
+		default:
+			chnlgroup = 0;
+			writeVal =
+			    rtlphy->mcs_txpwrlevel_origoffset[chnlgroup]
+			    [index + (rf ? 8 : 0)]
+			    + ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+
+			RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+				("RTK better performance, writeVal "
+				 "rf(%c) = 0x%x\n",
+				 ((rf == 0) ? 'A' : 'B'), writeVal));
+			break;
+		}
+
+		if (rtlpriv->dm.dynamic_txhighpower_lvl == TXHIGHPWRLEVEL_BT1)
+			writeVal = writeVal - 0x06060606;
+		else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+			 TXHIGHPWRLEVEL_BT2)
+			writeVal = writeVal - 0x0c0c0c0c;
+		*(p_outwriteval + rf) = writeVal;
+	}
+}
+
+static void _rtl92c_write_ofdm_power_reg(struct ieee80211_hw *hw,
+					 u8 index, u32 *pValue)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	u16 regoffset_a[6] = {
+		RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24,
+		RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04,
+		RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12
+	};
+	u16 regoffset_b[6] = {
+		RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24,
+		RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04,
+		RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12
+	};
+	u8 i, rf, pwr_val[4];
+	u32 writeVal;
+	u16 regoffset;
+
+	for (rf = 0; rf < 2; rf++) {
+		writeVal = pValue[rf];
+		for (i = 0; i < 4; i++) {
+			pwr_val[i] = (u8) ((writeVal & (0x7f <<
+							(i * 8))) >> (i * 8));
+
+			if (pwr_val[i] > RF6052_MAX_TX_PWR)
+				pwr_val[i] = RF6052_MAX_TX_PWR;
+		}
+		writeVal = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
+		    (pwr_val[1] << 8) | pwr_val[0];
+
+		if (rf == 0)
+			regoffset = regoffset_a[index];
+		else
+			regoffset = regoffset_b[index];
+		rtl_set_bbreg(hw, regoffset, MASKDWORD, writeVal);
+
+		RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+			("Set 0x%x = %08x\n", regoffset, writeVal));
+
+		if (((get_rf_type(rtlphy) == RF_2T2R) &&
+		     (regoffset == RTXAGC_A_MCS15_MCS12 ||
+		      regoffset == RTXAGC_B_MCS15_MCS12)) ||
+		    ((get_rf_type(rtlphy) != RF_2T2R) &&
+		     (regoffset == RTXAGC_A_MCS07_MCS04 ||
+		      regoffset == RTXAGC_B_MCS07_MCS04))) {
+
+			writeVal = pwr_val[3];
+			if (regoffset == RTXAGC_A_MCS15_MCS12 ||
+			    regoffset == RTXAGC_A_MCS07_MCS04)
+				regoffset = 0xc90;
+			if (regoffset == RTXAGC_B_MCS15_MCS12 ||
+			    regoffset == RTXAGC_B_MCS07_MCS04)
+				regoffset = 0xc98;
+
+			for (i = 0; i < 3; i++) {
+				writeVal = (writeVal > 6) ? (writeVal - 6) : 0;
+				rtl_write_byte(rtlpriv, (u32) (regoffset + i),
+					       (u8) writeVal);
+			}
+		}
+	}
+}
+
+void rtl92c_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+					u8 *ppowerlevel, u8 channel)
+{
+	u32 writeVal[2], powerBase0[2], powerBase1[2];
+	u8 index;
+
+	rtl92c_phy_get_power_base(hw, ppowerlevel,
+				  channel, &powerBase0[0], &powerBase1[0]);
+
+	for (index = 0; index < 6; index++) {
+		_rtl92c_get_txpower_writeval_by_regulatory(hw,
+							   channel, index,
+							   &powerBase0[0],
+							   &powerBase1[0],
+							   &writeVal[0]);
+
+		_rtl92c_write_ofdm_power_reg(hw, index, &writeVal[0]);
+	}
+}
+
+bool rtl92c_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+	if (rtlphy->rf_type == RF_1T1R)
+		rtlphy->num_total_rfpath = 1;
+	else
+		rtlphy->num_total_rfpath = 2;
+
+	return _rtl92c_phy_rf6052_config_parafile(hw);
+}
+
+static bool _rtl92c_phy_rf6052_config_parafile(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u32 u4_regvalue;
+	u8 rfpath;
+	bool rtstatus;
+	struct bb_reg_def *pphyreg;
+
+	for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+
+		pphyreg = &rtlphy->phyreg_def[rfpath];
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+						    BRFSI_RFENV << 16);
+			break;
+		}
+
+		rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2,
+			      B3WIREADDREAALENGTH, 0x0);
+		udelay(1);
+
+		rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0);
+		udelay(1);
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+			rtstatus = rtl92c_phy_config_rf_with_headerfile(hw,
+					(enum radio_path) rfpath);
+			break;
+		case RF90_PATH_B:
+			rtstatus = rtl92c_phy_config_rf_with_headerfile(hw,
+					(enum radio_path) rfpath);
+			break;
+		case RF90_PATH_C:
+			break;
+		case RF90_PATH_D:
+			break;
+		}
+
+		switch (rfpath) {
+		case RF90_PATH_A:
+		case RF90_PATH_C:
+			rtl_set_bbreg(hw, pphyreg->rfintfs,
+				      BRFSI_RFENV, u4_regvalue);
+			break;
+		case RF90_PATH_B:
+		case RF90_PATH_D:
+			rtl_set_bbreg(hw, pphyreg->rfintfs,
+				      BRFSI_RFENV << 16, u4_regvalue);
+			break;
+		}
+
+		if (rtstatus != true) {
+			RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+				 ("Radio[%d] Fail!!", rfpath));
+			return false;
+		}
+
+	}
+
+	RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("<---\n"));
+	return rtstatus;
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/rf.h b/drivers/net/wireless/rtlwifi/rtl8192ce/rf.h
new file mode 100644
index 00000000000..d3014f99bb7
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/rf.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92C_RF_H__
+#define __RTL92C_RF_H__
+
+#define RF6052_MAX_TX_PWR		0x3F
+#define RF6052_MAX_REG			0x3F
+#define RF6052_MAX_PATH			2
+
+extern void rtl92c_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
+					    u8 bandwidth);
+extern void rtl92c_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+					      u8 *ppowerlevel);
+extern void rtl92c_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+					       u8 *ppowerlevel, u8 channel);
+extern bool rtl92c_phy_rf6052_config(struct ieee80211_hw *hw);
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
new file mode 100644
index 00000000000..b366e886292
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c
@@ -0,0 +1,282 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include <linux/vmalloc.h>
+
+#include "../wifi.h"
+#include "../core.h"
+#include "../pci.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "dm.h"
+#include "hw.h"
+#include "sw.h"
+#include "trx.h"
+#include "led.h"
+
+int rtl92c_init_sw_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+
+	rtlpriv->dm.b_dm_initialgain_enable = 1;
+	rtlpriv->dm.dm_flag = 0;
+	rtlpriv->dm.b_disable_framebursting = 0;;
+	rtlpriv->dm.thermalvalue = 0;
+	rtlpci->transmit_config = CFENDFORM | BIT(12) | BIT(13);
+
+	rtlpci->receive_config = (RCR_APPFCS |
+				  RCR_AMF |
+				  RCR_ADF |
+				  RCR_APP_MIC |
+				  RCR_APP_ICV |
+				  RCR_AICV |
+				  RCR_ACRC32 |
+				  RCR_AB |
+				  RCR_AM |
+				  RCR_APM |
+				  RCR_APP_PHYST_RXFF | RCR_HTC_LOC_CTRL | 0);
+
+	rtlpci->irq_mask[0] =
+	    (u32) (IMR_ROK |
+		   IMR_VODOK |
+		   IMR_VIDOK |
+		   IMR_BEDOK |
+		   IMR_BKDOK |
+		   IMR_MGNTDOK |
+		   IMR_HIGHDOK | IMR_BDOK | IMR_RDU | IMR_RXFOVW | 0);
+
+	rtlpci->irq_mask[1] = (u32) (IMR_CPWM | IMR_C2HCMD | 0);
+
+	rtlpriv->rtlhal.pfirmware = (u8 *) vmalloc(0x4000);
+	if (!rtlpriv->rtlhal.pfirmware) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+			 ("Can't alloc buffer for fw.\n"));
+		return 1;
+	}
+
+	return 0;
+}
+
+void rtl92c_deinit_sw_vars(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->rtlhal.pfirmware) {
+		vfree(rtlpriv->rtlhal.pfirmware);
+		rtlpriv->rtlhal.pfirmware = NULL;
+	}
+}
+
+static struct rtl_hal_ops rtl8192ce_hal_ops = {
+	.init_sw_vars = rtl92c_init_sw_vars,
+	.deinit_sw_vars = rtl92c_deinit_sw_vars,
+	.read_eeprom_info = rtl92ce_read_eeprom_info,
+	.interrupt_recognized = rtl92ce_interrupt_recognized,
+	.hw_init = rtl92ce_hw_init,
+	.hw_disable = rtl92ce_card_disable,
+	.enable_interrupt = rtl92ce_enable_interrupt,
+	.disable_interrupt = rtl92ce_disable_interrupt,
+	.set_network_type = rtl92ce_set_network_type,
+	.set_qos = rtl92ce_set_qos,
+	.set_bcn_reg = rtl92ce_set_beacon_related_registers,
+	.set_bcn_intv = rtl92ce_set_beacon_interval,
+	.update_interrupt_mask = rtl92ce_update_interrupt_mask,
+	.get_hw_reg = rtl92ce_get_hw_reg,
+	.set_hw_reg = rtl92ce_set_hw_reg,
+	.update_rate_table = rtl92ce_update_hal_rate_table,
+	.update_rate_mask = rtl92ce_update_hal_rate_mask,
+	.fill_tx_desc = rtl92ce_tx_fill_desc,
+	.fill_tx_cmddesc = rtl92ce_tx_fill_cmddesc,
+	.query_rx_desc = rtl92ce_rx_query_desc,
+	.set_channel_access = rtl92ce_update_channel_access_setting,
+	.radio_onoff_checking = rtl92ce_gpio_radio_on_off_checking,
+	.set_bw_mode = rtl92c_phy_set_bw_mode,
+	.switch_channel = rtl92c_phy_sw_chnl,
+	.dm_watchdog = rtl92c_dm_watchdog,
+	.scan_operation_backup = rtl92c_phy_scan_operation_backup,
+	.set_rf_power_state = rtl92c_phy_set_rf_power_state,
+	.led_control = rtl92ce_led_control,
+	.set_desc = rtl92ce_set_desc,
+	.get_desc = rtl92ce_get_desc,
+	.tx_polling = rtl92ce_tx_polling,
+	.enable_hw_sec = rtl92ce_enable_hw_security_config,
+	.set_key = rtl92ce_set_key,
+	.init_sw_leds = rtl92ce_init_sw_leds,
+	.deinit_sw_leds = rtl92ce_deinit_sw_leds,
+	.get_bbreg = rtl92c_phy_query_bb_reg,
+	.set_bbreg = rtl92c_phy_set_bb_reg,
+	.get_rfreg = rtl92c_phy_query_rf_reg,
+	.set_rfreg = rtl92c_phy_set_rf_reg,
+};
+
+static struct rtl_mod_params rtl92ce_mod_params = {
+	.sw_crypto = 0,
+};
+
+static struct rtl_hal_cfg rtl92ce_hal_cfg = {
+	.name = "rtl92c_pci",
+	.fw_name = "rtlwifi/rtl8192cfw.bin",
+	.ops = &rtl8192ce_hal_ops,
+	.mod_params = &rtl92ce_mod_params,
+
+	.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
+	.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
+	.maps[SYS_CLK] = REG_SYS_CLKR,
+	.maps[MAC_RCR_AM] = AM,
+	.maps[MAC_RCR_AB] = AB,
+	.maps[MAC_RCR_ACRC32] = ACRC32,
+	.maps[MAC_RCR_ACF] = ACF,
+	.maps[MAC_RCR_AAP] = AAP,
+
+	.maps[EFUSE_TEST] = REG_EFUSE_TEST,
+	.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_CLK] = 0,
+	.maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
+	.maps[EFUSE_PWC_EV12V] = PWC_EV12V,
+	.maps[EFUSE_FEN_ELDR] = FEN_ELDR,
+	.maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
+	.maps[EFUSE_ANA8M] = EFUSE_ANA8M,
+	.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
+
+	.maps[RWCAM] = REG_CAMCMD,
+	.maps[WCAMI] = REG_CAMWRITE,
+	.maps[RCAMO] = REG_CAMREAD,
+	.maps[CAMDBG] = REG_CAMDBG,
+	.maps[SECR] = REG_SECCFG,
+	.maps[SEC_CAM_NONE] = CAM_NONE,
+	.maps[SEC_CAM_WEP40] = CAM_WEP40,
+	.maps[SEC_CAM_TKIP] = CAM_TKIP,
+	.maps[SEC_CAM_AES] = CAM_AES,
+	.maps[SEC_CAM_WEP104] = CAM_WEP104,
+
+	.maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
+	.maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
+	.maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
+	.maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
+	.maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
+	.maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
+	.maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
+	.maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
+	.maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
+	.maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
+	.maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
+	.maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
+	.maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
+	.maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
+	.maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
+	.maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
+
+	.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
+	.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
+	.maps[RTL_IMR_BcnInt] = IMR_BCNINT,
+	.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
+	.maps[RTL_IMR_RDU] = IMR_RDU,
+	.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
+	.maps[RTL_IMR_BDOK] = IMR_BDOK,
+	.maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
+	.maps[RTL_IMR_TBDER] = IMR_TBDER,
+	.maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
+	.maps[RTL_IMR_TBDOK] = IMR_TBDOK,
+	.maps[RTL_IMR_BKDOK] = IMR_BKDOK,
+	.maps[RTL_IMR_BEDOK] = IMR_BEDOK,
+	.maps[RTL_IMR_VIDOK] = IMR_VIDOK,
+	.maps[RTL_IMR_VODOK] = IMR_VODOK,
+	.maps[RTL_IMR_ROK] = IMR_ROK,
+	.maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
+
+	.maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M,
+	.maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M,
+	.maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M,
+	.maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M,
+	.maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M,
+	.maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M,
+	.maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M,
+	.maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M,
+	.maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M,
+	.maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M,
+	.maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M,
+	.maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M,
+
+	.maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7,
+	.maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15,
+};
+
+static struct pci_device_id rtl92ce_pci_ids[] __devinitdata = {
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8191, rtl92ce_hal_cfg)},
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8178, rtl92ce_hal_cfg)},
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8177, rtl92ce_hal_cfg)},
+	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8176, rtl92ce_hal_cfg)},
+	{},
+};
+
+MODULE_DEVICE_TABLE(pci, rtl92ce_pci_ids);
+
+MODULE_AUTHOR("lizhaoming	<chaoming_li@realsil.com.cn>");
+MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
+MODULE_AUTHOR("Larry Finger	<Larry.Finger@lwfinger.net>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Realtek 8192C/8188C 802.11n PCI wireless");
+MODULE_FIRMWARE("rtlwifi/rtl8192cfw.bin");
+
+module_param_named(swenc, rtl92ce_mod_params.sw_crypto, bool, 0444);
+MODULE_PARM_DESC(swenc, "using hardware crypto (default 0 [hardware])\n");
+
+static struct pci_driver rtl92ce_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = rtl92ce_pci_ids,
+	.probe = rtl_pci_probe,
+	.remove = rtl_pci_disconnect,
+
+#ifdef CONFIG_PM
+	.suspend = rtl_pci_suspend,
+	.resume = rtl_pci_resume,
+#endif
+
+};
+
+static int __init rtl92ce_module_init(void)
+{
+	int ret;
+
+	ret = pci_register_driver(&rtl92ce_driver);
+	if (ret)
+		RT_ASSERT(false, (": No device found\n"));
+
+	return ret;
+}
+
+static void __exit rtl92ce_module_exit(void)
+{
+	pci_unregister_driver(&rtl92ce_driver);
+}
+
+module_init(rtl92ce_module_init);
+module_exit(rtl92ce_module_exit);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.h b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.h
new file mode 100644
index 00000000000..de1198c38d4
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.h
@@ -0,0 +1,37 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92CE_SW_H__
+#define __RTL92CE_SW_H__
+
+int rtl92c_init_sw_vars(struct ieee80211_hw *hw);
+void rtl92c_deinit_sw_vars(struct ieee80211_hw *hw);
+void rtl92c_init_var_map(struct ieee80211_hw *hw);
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/table.c b/drivers/net/wireless/rtlwifi/rtl8192ce/table.c
new file mode 100644
index 00000000000..ba938b91aa6
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/table.c
@@ -0,0 +1,1224 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Created on  2010/ 5/18,  1:41
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "table.h"
+
+
+u32 RTL8192CEPHY_REG_2TARRAY[PHY_REG_2TARRAY_LENGTH] = {
+	0x024, 0x0011800f,
+	0x028, 0x00ffdb83,
+	0x800, 0x80040002,
+	0x804, 0x00000003,
+	0x808, 0x0000fc00,
+	0x80c, 0x0000000a,
+	0x810, 0x10005388,
+	0x814, 0x020c3d10,
+	0x818, 0x02200385,
+	0x81c, 0x00000000,
+	0x820, 0x01000100,
+	0x824, 0x00390004,
+	0x828, 0x01000100,
+	0x82c, 0x00390004,
+	0x830, 0x27272727,
+	0x834, 0x27272727,
+	0x838, 0x27272727,
+	0x83c, 0x27272727,
+	0x840, 0x00010000,
+	0x844, 0x00010000,
+	0x848, 0x27272727,
+	0x84c, 0x27272727,
+	0x850, 0x00000000,
+	0x854, 0x00000000,
+	0x858, 0x569a569a,
+	0x85c, 0x0c1b25a4,
+	0x860, 0x66e60230,
+	0x864, 0x061f0130,
+	0x868, 0x27272727,
+	0x86c, 0x2b2b2b27,
+	0x870, 0x07000700,
+	0x874, 0x22184000,
+	0x878, 0x08080808,
+	0x87c, 0x00000000,
+	0x880, 0xc0083070,
+	0x884, 0x000004d5,
+	0x888, 0x00000000,
+	0x88c, 0xcc0000c0,
+	0x890, 0x00000800,
+	0x894, 0xfffffffe,
+	0x898, 0x40302010,
+	0x89c, 0x00706050,
+	0x900, 0x00000000,
+	0x904, 0x00000023,
+	0x908, 0x00000000,
+	0x90c, 0x81121313,
+	0xa00, 0x00d047c8,
+	0xa04, 0x80ff000c,
+	0xa08, 0x8c838300,
+	0xa0c, 0x2e68120f,
+	0xa10, 0x9500bb78,
+	0xa14, 0x11144028,
+	0xa18, 0x00881117,
+	0xa1c, 0x89140f00,
+	0xa20, 0x1a1b0000,
+	0xa24, 0x090e1317,
+	0xa28, 0x00000204,
+	0xa2c, 0x00d30000,
+	0xa70, 0x101fbf00,
+	0xa74, 0x00000007,
+	0xc00, 0x48071d40,
+	0xc04, 0x03a05633,
+	0xc08, 0x000000e4,
+	0xc0c, 0x6c6c6c6c,
+	0xc10, 0x08800000,
+	0xc14, 0x40000100,
+	0xc18, 0x08800000,
+	0xc1c, 0x40000100,
+	0xc20, 0x00000000,
+	0xc24, 0x00000000,
+	0xc28, 0x00000000,
+	0xc2c, 0x00000000,
+	0xc30, 0x69e9ac44,
+	0xc34, 0x469652cf,
+	0xc38, 0x49795994,
+	0xc3c, 0x0a97971c,
+	0xc40, 0x1f7c403f,
+	0xc44, 0x000100b7,
+	0xc48, 0xec020107,
+	0xc4c, 0x007f037f,
+	0xc50, 0x69543420,
+	0xc54, 0x43bc0094,
+	0xc58, 0x69543420,
+	0xc5c, 0x433c0094,
+	0xc60, 0x00000000,
+	0xc64, 0x5116848b,
+	0xc68, 0x47c00bff,
+	0xc6c, 0x00000036,
+	0xc70, 0x2c7f000d,
+	0xc74, 0x018610db,
+	0xc78, 0x0000001f,
+	0xc7c, 0x00b91612,
+	0xc80, 0x40000100,
+	0xc84, 0x20f60000,
+	0xc88, 0x40000100,
+	0xc8c, 0x20200000,
+	0xc90, 0x00121820,
+	0xc94, 0x00000000,
+	0xc98, 0x00121820,
+	0xc9c, 0x00007f7f,
+	0xca0, 0x00000000,
+	0xca4, 0x00000080,
+	0xca8, 0x00000000,
+	0xcac, 0x00000000,
+	0xcb0, 0x00000000,
+	0xcb4, 0x00000000,
+	0xcb8, 0x00000000,
+	0xcbc, 0x28000000,
+	0xcc0, 0x00000000,
+	0xcc4, 0x00000000,
+	0xcc8, 0x00000000,
+	0xccc, 0x00000000,
+	0xcd0, 0x00000000,
+	0xcd4, 0x00000000,
+	0xcd8, 0x64b22427,
+	0xcdc, 0x00766932,
+	0xce0, 0x00222222,
+	0xce4, 0x00000000,
+	0xce8, 0x37644302,
+	0xcec, 0x2f97d40c,
+	0xd00, 0x00080740,
+	0xd04, 0x00020403,
+	0xd08, 0x0000907f,
+	0xd0c, 0x20010201,
+	0xd10, 0xa0633333,
+	0xd14, 0x3333bc43,
+	0xd18, 0x7a8f5b6b,
+	0xd2c, 0xcc979975,
+	0xd30, 0x00000000,
+	0xd34, 0x80608000,
+	0xd38, 0x00000000,
+	0xd3c, 0x00027293,
+	0xd40, 0x00000000,
+	0xd44, 0x00000000,
+	0xd48, 0x00000000,
+	0xd4c, 0x00000000,
+	0xd50, 0x6437140a,
+	0xd54, 0x00000000,
+	0xd58, 0x00000000,
+	0xd5c, 0x30032064,
+	0xd60, 0x4653de68,
+	0xd64, 0x04518a3c,
+	0xd68, 0x00002101,
+	0xd6c, 0x2a201c16,
+	0xd70, 0x1812362e,
+	0xd74, 0x322c2220,
+	0xd78, 0x000e3c24,
+	0xe00, 0x2a2a2a2a,
+	0xe04, 0x2a2a2a2a,
+	0xe08, 0x03902a2a,
+	0xe10, 0x2a2a2a2a,
+	0xe14, 0x2a2a2a2a,
+	0xe18, 0x2a2a2a2a,
+	0xe1c, 0x2a2a2a2a,
+	0xe28, 0x00000000,
+	0xe30, 0x1000dc1f,
+	0xe34, 0x10008c1f,
+	0xe38, 0x02140102,
+	0xe3c, 0x681604c2,
+	0xe40, 0x01007c00,
+	0xe44, 0x01004800,
+	0xe48, 0xfb000000,
+	0xe4c, 0x000028d1,
+	0xe50, 0x1000dc1f,
+	0xe54, 0x10008c1f,
+	0xe58, 0x02140102,
+	0xe5c, 0x28160d05,
+	0xe60, 0x00000010,
+	0xe68, 0x001b25a4,
+	0xe6c, 0x63db25a4,
+	0xe70, 0x63db25a4,
+	0xe74, 0x0c1b25a4,
+	0xe78, 0x0c1b25a4,
+	0xe7c, 0x0c1b25a4,
+	0xe80, 0x0c1b25a4,
+	0xe84, 0x63db25a4,
+	0xe88, 0x0c1b25a4,
+	0xe8c, 0x63db25a4,
+	0xed0, 0x63db25a4,
+	0xed4, 0x63db25a4,
+	0xed8, 0x63db25a4,
+	0xedc, 0x001b25a4,
+	0xee0, 0x001b25a4,
+	0xeec, 0x6fdb25a4,
+	0xf14, 0x00000003,
+	0xf4c, 0x00000000,
+	0xf00, 0x00000300,
+};
+
+u32 RTL8192CEPHY_REG_1TARRAY[PHY_REG_1TARRAY_LENGTH] = {
+	0x024, 0x0011800f,
+	0x028, 0x00ffdb83,
+	0x800, 0x80040000,
+	0x804, 0x00000001,
+	0x808, 0x0000fc00,
+	0x80c, 0x0000000a,
+	0x810, 0x10005388,
+	0x814, 0x020c3d10,
+	0x818, 0x02200385,
+	0x81c, 0x00000000,
+	0x820, 0x01000100,
+	0x824, 0x00390004,
+	0x828, 0x00000000,
+	0x82c, 0x00000000,
+	0x830, 0x00000000,
+	0x834, 0x00000000,
+	0x838, 0x00000000,
+	0x83c, 0x00000000,
+	0x840, 0x00010000,
+	0x844, 0x00000000,
+	0x848, 0x00000000,
+	0x84c, 0x00000000,
+	0x850, 0x00000000,
+	0x854, 0x00000000,
+	0x858, 0x569a569a,
+	0x85c, 0x001b25a4,
+	0x860, 0x66e60230,
+	0x864, 0x061f0130,
+	0x868, 0x00000000,
+	0x86c, 0x32323200,
+	0x870, 0x07000700,
+	0x874, 0x22004000,
+	0x878, 0x00000808,
+	0x87c, 0x00000000,
+	0x880, 0xc0083070,
+	0x884, 0x000004d5,
+	0x888, 0x00000000,
+	0x88c, 0xccc000c0,
+	0x890, 0x00000800,
+	0x894, 0xfffffffe,
+	0x898, 0x40302010,
+	0x89c, 0x00706050,
+	0x900, 0x00000000,
+	0x904, 0x00000023,
+	0x908, 0x00000000,
+	0x90c, 0x81121111,
+	0xa00, 0x00d047c8,
+	0xa04, 0x80ff000c,
+	0xa08, 0x8c838300,
+	0xa0c, 0x2e68120f,
+	0xa10, 0x9500bb78,
+	0xa14, 0x11144028,
+	0xa18, 0x00881117,
+	0xa1c, 0x89140f00,
+	0xa20, 0x1a1b0000,
+	0xa24, 0x090e1317,
+	0xa28, 0x00000204,
+	0xa2c, 0x00d30000,
+	0xa70, 0x101fbf00,
+	0xa74, 0x00000007,
+	0xc00, 0x48071d40,
+	0xc04, 0x03a05611,
+	0xc08, 0x000000e4,
+	0xc0c, 0x6c6c6c6c,
+	0xc10, 0x08800000,
+	0xc14, 0x40000100,
+	0xc18, 0x08800000,
+	0xc1c, 0x40000100,
+	0xc20, 0x00000000,
+	0xc24, 0x00000000,
+	0xc28, 0x00000000,
+	0xc2c, 0x00000000,
+	0xc30, 0x69e9ac44,
+	0xc34, 0x469652cf,
+	0xc38, 0x49795994,
+	0xc3c, 0x0a97971c,
+	0xc40, 0x1f7c403f,
+	0xc44, 0x000100b7,
+	0xc48, 0xec020107,
+	0xc4c, 0x007f037f,
+	0xc50, 0x69543420,
+	0xc54, 0x43bc0094,
+	0xc58, 0x69543420,
+	0xc5c, 0x433c0094,
+	0xc60, 0x00000000,
+	0xc64, 0x5116848b,
+	0xc68, 0x47c00bff,
+	0xc6c, 0x00000036,
+	0xc70, 0x2c7f000d,
+	0xc74, 0x018610db,
+	0xc78, 0x0000001f,
+	0xc7c, 0x00b91612,
+	0xc80, 0x40000100,
+	0xc84, 0x20f60000,
+	0xc88, 0x40000100,
+	0xc8c, 0x20200000,
+	0xc90, 0x00121820,
+	0xc94, 0x00000000,
+	0xc98, 0x00121820,
+	0xc9c, 0x00007f7f,
+	0xca0, 0x00000000,
+	0xca4, 0x00000080,
+	0xca8, 0x00000000,
+	0xcac, 0x00000000,
+	0xcb0, 0x00000000,
+	0xcb4, 0x00000000,
+	0xcb8, 0x00000000,
+	0xcbc, 0x28000000,
+	0xcc0, 0x00000000,
+	0xcc4, 0x00000000,
+	0xcc8, 0x00000000,
+	0xccc, 0x00000000,
+	0xcd0, 0x00000000,
+	0xcd4, 0x00000000,
+	0xcd8, 0x64b22427,
+	0xcdc, 0x00766932,
+	0xce0, 0x00222222,
+	0xce4, 0x00000000,
+	0xce8, 0x37644302,
+	0xcec, 0x2f97d40c,
+	0xd00, 0x00080740,
+	0xd04, 0x00020401,
+	0xd08, 0x0000907f,
+	0xd0c, 0x20010201,
+	0xd10, 0xa0633333,
+	0xd14, 0x3333bc43,
+	0xd18, 0x7a8f5b6b,
+	0xd2c, 0xcc979975,
+	0xd30, 0x00000000,
+	0xd34, 0x80608000,
+	0xd38, 0x00000000,
+	0xd3c, 0x00027293,
+	0xd40, 0x00000000,
+	0xd44, 0x00000000,
+	0xd48, 0x00000000,
+	0xd4c, 0x00000000,
+	0xd50, 0x6437140a,
+	0xd54, 0x00000000,
+	0xd58, 0x00000000,
+	0xd5c, 0x30032064,
+	0xd60, 0x4653de68,
+	0xd64, 0x04518a3c,
+	0xd68, 0x00002101,
+	0xd6c, 0x2a201c16,
+	0xd70, 0x1812362e,
+	0xd74, 0x322c2220,
+	0xd78, 0x000e3c24,
+	0xe00, 0x2a2a2a2a,
+	0xe04, 0x2a2a2a2a,
+	0xe08, 0x03902a2a,
+	0xe10, 0x2a2a2a2a,
+	0xe14, 0x2a2a2a2a,
+	0xe18, 0x2a2a2a2a,
+	0xe1c, 0x2a2a2a2a,
+	0xe28, 0x00000000,
+	0xe30, 0x1000dc1f,
+	0xe34, 0x10008c1f,
+	0xe38, 0x02140102,
+	0xe3c, 0x681604c2,
+	0xe40, 0x01007c00,
+	0xe44, 0x01004800,
+	0xe48, 0xfb000000,
+	0xe4c, 0x000028d1,
+	0xe50, 0x1000dc1f,
+	0xe54, 0x10008c1f,
+	0xe58, 0x02140102,
+	0xe5c, 0x28160d05,
+	0xe60, 0x00000010,
+	0xe68, 0x001b25a4,
+	0xe6c, 0x631b25a0,
+	0xe70, 0x631b25a0,
+	0xe74, 0x081b25a0,
+	0xe78, 0x081b25a0,
+	0xe7c, 0x081b25a0,
+	0xe80, 0x081b25a0,
+	0xe84, 0x631b25a0,
+	0xe88, 0x081b25a0,
+	0xe8c, 0x631b25a0,
+	0xed0, 0x631b25a0,
+	0xed4, 0x631b25a0,
+	0xed8, 0x631b25a0,
+	0xedc, 0x001b25a0,
+	0xee0, 0x001b25a0,
+	0xeec, 0x6b1b25a0,
+	0xf14, 0x00000003,
+	0xf4c, 0x00000000,
+	0xf00, 0x00000300,
+};
+
+u32 RTL8192CEPHY_REG_ARRAY_PG[PHY_REG_ARRAY_PGLENGTH] = {
+	0xe00, 0xffffffff, 0x0a0c0c0c,
+	0xe04, 0xffffffff, 0x02040608,
+	0xe08, 0x0000ff00, 0x00000000,
+	0x86c, 0xffffff00, 0x00000000,
+	0xe10, 0xffffffff, 0x0a0c0d0e,
+	0xe14, 0xffffffff, 0x02040608,
+	0xe18, 0xffffffff, 0x0a0c0d0e,
+	0xe1c, 0xffffffff, 0x02040608,
+	0x830, 0xffffffff, 0x0a0c0c0c,
+	0x834, 0xffffffff, 0x02040608,
+	0x838, 0xffffff00, 0x00000000,
+	0x86c, 0x000000ff, 0x00000000,
+	0x83c, 0xffffffff, 0x0a0c0d0e,
+	0x848, 0xffffffff, 0x02040608,
+	0x84c, 0xffffffff, 0x0a0c0d0e,
+	0x868, 0xffffffff, 0x02040608,
+	0xe00, 0xffffffff, 0x00000000,
+	0xe04, 0xffffffff, 0x00000000,
+	0xe08, 0x0000ff00, 0x00000000,
+	0x86c, 0xffffff00, 0x00000000,
+	0xe10, 0xffffffff, 0x00000000,
+	0xe14, 0xffffffff, 0x00000000,
+	0xe18, 0xffffffff, 0x00000000,
+	0xe1c, 0xffffffff, 0x00000000,
+	0x830, 0xffffffff, 0x00000000,
+	0x834, 0xffffffff, 0x00000000,
+	0x838, 0xffffff00, 0x00000000,
+	0x86c, 0x000000ff, 0x00000000,
+	0x83c, 0xffffffff, 0x00000000,
+	0x848, 0xffffffff, 0x00000000,
+	0x84c, 0xffffffff, 0x00000000,
+	0x868, 0xffffffff, 0x00000000,
+	0xe00, 0xffffffff, 0x04040404,
+	0xe04, 0xffffffff, 0x00020204,
+	0xe08, 0x0000ff00, 0x00000000,
+	0x86c, 0xffffff00, 0x00000000,
+	0xe10, 0xffffffff, 0x06060606,
+	0xe14, 0xffffffff, 0x00020406,
+	0xe18, 0xffffffff, 0x06060606,
+	0xe1c, 0xffffffff, 0x00020406,
+	0x830, 0xffffffff, 0x04040404,
+	0x834, 0xffffffff, 0x00020204,
+	0x838, 0xffffff00, 0x00000000,
+	0x86c, 0x000000ff, 0x00000000,
+	0x83c, 0xffffffff, 0x06060606,
+	0x848, 0xffffffff, 0x00020406,
+	0x84c, 0xffffffff, 0x06060606,
+	0x868, 0xffffffff, 0x00020406,
+	0xe00, 0xffffffff, 0x00000000,
+	0xe04, 0xffffffff, 0x00000000,
+	0xe08, 0x0000ff00, 0x00000000,
+	0x86c, 0xffffff00, 0x00000000,
+	0xe10, 0xffffffff, 0x00000000,
+	0xe14, 0xffffffff, 0x00000000,
+	0xe18, 0xffffffff, 0x00000000,
+	0xe1c, 0xffffffff, 0x00000000,
+	0x830, 0xffffffff, 0x00000000,
+	0x834, 0xffffffff, 0x00000000,
+	0x838, 0xffffff00, 0x00000000,
+	0x86c, 0x000000ff, 0x00000000,
+	0x83c, 0xffffffff, 0x00000000,
+	0x848, 0xffffffff, 0x00000000,
+	0x84c, 0xffffffff, 0x00000000,
+	0x868, 0xffffffff, 0x00000000,
+};
+
+u32 RTL8192CERADIOA_2TARRAY[RADIOA_2TARRAYLENGTH] = {
+	0x000, 0x00030159,
+	0x001, 0x00031284,
+	0x002, 0x00098000,
+	0x003, 0x00018c63,
+	0x004, 0x000210e7,
+	0x009, 0x0002044f,
+	0x00a, 0x0001adb0,
+	0x00b, 0x00054867,
+	0x00c, 0x0008992e,
+	0x00d, 0x0000e52c,
+	0x00e, 0x00039ce7,
+	0x00f, 0x00000451,
+	0x019, 0x00000000,
+	0x01a, 0x00010255,
+	0x01b, 0x00060a00,
+	0x01c, 0x000fc378,
+	0x01d, 0x000a1250,
+	0x01e, 0x0004445f,
+	0x01f, 0x00080001,
+	0x020, 0x0000b614,
+	0x021, 0x0006c000,
+	0x022, 0x00000000,
+	0x023, 0x00001558,
+	0x024, 0x00000060,
+	0x025, 0x00000483,
+	0x026, 0x0004f000,
+	0x027, 0x000ec7d9,
+	0x028, 0x000977c0,
+	0x029, 0x00004783,
+	0x02a, 0x00000001,
+	0x02b, 0x00021334,
+	0x02a, 0x00000000,
+	0x02b, 0x00000054,
+	0x02a, 0x00000001,
+	0x02b, 0x00000808,
+	0x02b, 0x00053333,
+	0x02c, 0x0000000c,
+	0x02a, 0x00000002,
+	0x02b, 0x00000808,
+	0x02b, 0x0005b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000003,
+	0x02b, 0x00000808,
+	0x02b, 0x00063333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000004,
+	0x02b, 0x00000808,
+	0x02b, 0x0006b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000005,
+	0x02b, 0x00000808,
+	0x02b, 0x00073333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000006,
+	0x02b, 0x00000709,
+	0x02b, 0x0005b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000007,
+	0x02b, 0x00000709,
+	0x02b, 0x00063333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000008,
+	0x02b, 0x0000060a,
+	0x02b, 0x0004b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000009,
+	0x02b, 0x0000060a,
+	0x02b, 0x00053333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000a,
+	0x02b, 0x0000060a,
+	0x02b, 0x0005b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000b,
+	0x02b, 0x0000060a,
+	0x02b, 0x00063333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000c,
+	0x02b, 0x0000060a,
+	0x02b, 0x0006b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000d,
+	0x02b, 0x0000060a,
+	0x02b, 0x00073333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000e,
+	0x02b, 0x0000050b,
+	0x02b, 0x00066666,
+	0x02c, 0x0000001a,
+	0x02a, 0x000e0000,
+	0x010, 0x0004000f,
+	0x011, 0x000e31fc,
+	0x010, 0x0006000f,
+	0x011, 0x000ff9f8,
+	0x010, 0x0002000f,
+	0x011, 0x000203f9,
+	0x010, 0x0003000f,
+	0x011, 0x000ff500,
+	0x010, 0x00000000,
+	0x011, 0x00000000,
+	0x010, 0x0008000f,
+	0x011, 0x0003f100,
+	0x010, 0x0009000f,
+	0x011, 0x00023100,
+	0x012, 0x00032000,
+	0x012, 0x00071000,
+	0x012, 0x000b0000,
+	0x012, 0x000fc000,
+	0x013, 0x000287af,
+	0x013, 0x000244b7,
+	0x013, 0x000204ab,
+	0x013, 0x0001c49f,
+	0x013, 0x00018493,
+	0x013, 0x00014297,
+	0x013, 0x00010295,
+	0x013, 0x0000c298,
+	0x013, 0x0000819c,
+	0x013, 0x000040a8,
+	0x013, 0x0000001c,
+	0x014, 0x0001944c,
+	0x014, 0x00059444,
+	0x014, 0x0009944c,
+	0x014, 0x000d9444,
+	0x015, 0x0000f424,
+	0x015, 0x0004f424,
+	0x015, 0x0008f424,
+	0x015, 0x000cf424,
+	0x016, 0x000e0330,
+	0x016, 0x000a0330,
+	0x016, 0x00060330,
+	0x016, 0x00020330,
+	0x000, 0x00010159,
+	0x018, 0x0000f401,
+	0x0fe, 0x00000000,
+	0x0fe, 0x00000000,
+	0x01f, 0x00080003,
+	0x0fe, 0x00000000,
+	0x0fe, 0x00000000,
+	0x01e, 0x00044457,
+	0x01f, 0x00080000,
+	0x000, 0x00030159,
+};
+
+u32 RTL8192CE_RADIOB_2TARRAY[RADIOB_2TARRAYLENGTH] = {
+	0x000, 0x00030159,
+	0x001, 0x00031284,
+	0x002, 0x00098000,
+	0x003, 0x00018c63,
+	0x004, 0x000210e7,
+	0x009, 0x0002044f,
+	0x00a, 0x0001adb0,
+	0x00b, 0x00054867,
+	0x00c, 0x0008992e,
+	0x00d, 0x0000e52c,
+	0x00e, 0x00039ce7,
+	0x00f, 0x00000451,
+	0x012, 0x00032000,
+	0x012, 0x00071000,
+	0x012, 0x000b0000,
+	0x012, 0x000fc000,
+	0x013, 0x000287af,
+	0x013, 0x000244b7,
+	0x013, 0x000204ab,
+	0x013, 0x0001c49f,
+	0x013, 0x00018493,
+	0x013, 0x00014297,
+	0x013, 0x00010295,
+	0x013, 0x0000c298,
+	0x013, 0x0000819c,
+	0x013, 0x000040a8,
+	0x013, 0x0000001c,
+	0x014, 0x0001944c,
+	0x014, 0x00059444,
+	0x014, 0x0009944c,
+	0x014, 0x000d9444,
+	0x015, 0x0000f424,
+	0x015, 0x0004f424,
+	0x015, 0x0008f424,
+	0x015, 0x000cf424,
+	0x016, 0x000e0330,
+	0x016, 0x000a0330,
+	0x016, 0x00060330,
+	0x016, 0x00020330,
+};
+
+u32 RTL8192CE_RADIOA_1TARRAY[RADIOA_1TARRAYLENGTH] = {
+	0x000, 0x00030159,
+	0x001, 0x00031284,
+	0x002, 0x00098000,
+	0x003, 0x00018c63,
+	0x004, 0x000210e7,
+	0x009, 0x0002044f,
+	0x00a, 0x0001adb0,
+	0x00b, 0x00054867,
+	0x00c, 0x0008992e,
+	0x00d, 0x0000e52c,
+	0x00e, 0x00039ce7,
+	0x00f, 0x00000451,
+	0x019, 0x00000000,
+	0x01a, 0x00010255,
+	0x01b, 0x00060a00,
+	0x01c, 0x000fc378,
+	0x01d, 0x000a1250,
+	0x01e, 0x0004445f,
+	0x01f, 0x00080001,
+	0x020, 0x0000b614,
+	0x021, 0x0006c000,
+	0x022, 0x00000000,
+	0x023, 0x00001558,
+	0x024, 0x00000060,
+	0x025, 0x00000483,
+	0x026, 0x0004f000,
+	0x027, 0x000ec7d9,
+	0x028, 0x000977c0,
+	0x029, 0x00004783,
+	0x02a, 0x00000001,
+	0x02b, 0x00021334,
+	0x02a, 0x00000000,
+	0x02b, 0x00000054,
+	0x02a, 0x00000001,
+	0x02b, 0x00000808,
+	0x02b, 0x00053333,
+	0x02c, 0x0000000c,
+	0x02a, 0x00000002,
+	0x02b, 0x00000808,
+	0x02b, 0x0005b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000003,
+	0x02b, 0x00000808,
+	0x02b, 0x00063333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000004,
+	0x02b, 0x00000808,
+	0x02b, 0x0006b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000005,
+	0x02b, 0x00000808,
+	0x02b, 0x00073333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000006,
+	0x02b, 0x00000709,
+	0x02b, 0x0005b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000007,
+	0x02b, 0x00000709,
+	0x02b, 0x00063333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000008,
+	0x02b, 0x0000060a,
+	0x02b, 0x0004b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x00000009,
+	0x02b, 0x0000060a,
+	0x02b, 0x00053333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000a,
+	0x02b, 0x0000060a,
+	0x02b, 0x0005b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000b,
+	0x02b, 0x0000060a,
+	0x02b, 0x00063333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000c,
+	0x02b, 0x0000060a,
+	0x02b, 0x0006b333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000d,
+	0x02b, 0x0000060a,
+	0x02b, 0x00073333,
+	0x02c, 0x0000000d,
+	0x02a, 0x0000000e,
+	0x02b, 0x0000050b,
+	0x02b, 0x00066666,
+	0x02c, 0x0000001a,
+	0x02a, 0x000e0000,
+	0x010, 0x0004000f,
+	0x011, 0x000e31fc,
+	0x010, 0x0006000f,
+	0x011, 0x000ff9f8,
+	0x010, 0x0002000f,
+	0x011, 0x000203f9,
+	0x010, 0x0003000f,
+	0x011, 0x000ff500,
+	0x010, 0x00000000,
+	0x011, 0x00000000,
+	0x010, 0x0008000f,
+	0x011, 0x0003f100,
+	0x010, 0x0009000f,
+	0x011, 0x00023100,
+	0x012, 0x00032000,
+	0x012, 0x00071000,
+	0x012, 0x000b0000,
+	0x012, 0x000fc000,
+	0x013, 0x000287af,
+	0x013, 0x000244b7,
+	0x013, 0x000204ab,
+	0x013, 0x0001c49f,
+	0x013, 0x00018493,
+	0x013, 0x00014297,
+	0x013, 0x00010295,
+	0x013, 0x0000c298,
+	0x013, 0x0000819c,
+	0x013, 0x000040a8,
+	0x013, 0x0000001c,
+	0x014, 0x0001944c,
+	0x014, 0x00059444,
+	0x014, 0x0009944c,
+	0x014, 0x000d9444,
+	0x015, 0x0000f424,
+	0x015, 0x0004f424,
+	0x015, 0x0008f424,
+	0x015, 0x000cf424,
+	0x016, 0x000e0330,
+	0x016, 0x000a0330,
+	0x016, 0x00060330,
+	0x016, 0x00020330,
+	0x000, 0x00010159,
+	0x018, 0x0000f401,
+	0x0fe, 0x00000000,
+	0x0fe, 0x00000000,
+	0x01f, 0x00080003,
+	0x0fe, 0x00000000,
+	0x0fe, 0x00000000,
+	0x01e, 0x00044457,
+	0x01f, 0x00080000,
+	0x000, 0x00030159,
+};
+
+u32 RTL8192CE_RADIOB_1TARRAY[RADIOB_1TARRAYLENGTH] = {
+	0x0,
+};
+
+u32 RTL8192CEMAC_2T_ARRAY[MAC_2T_ARRAYLENGTH] = {
+	0x420, 0x00000080,
+	0x423, 0x00000000,
+	0x430, 0x00000000,
+	0x431, 0x00000000,
+	0x432, 0x00000000,
+	0x433, 0x00000001,
+	0x434, 0x00000004,
+	0x435, 0x00000005,
+	0x436, 0x00000006,
+	0x437, 0x00000007,
+	0x438, 0x00000000,
+	0x439, 0x00000000,
+	0x43a, 0x00000000,
+	0x43b, 0x00000001,
+	0x43c, 0x00000004,
+	0x43d, 0x00000005,
+	0x43e, 0x00000006,
+	0x43f, 0x00000007,
+	0x440, 0x0000005d,
+	0x441, 0x00000001,
+	0x442, 0x00000000,
+	0x444, 0x00000015,
+	0x445, 0x000000f0,
+	0x446, 0x0000000f,
+	0x447, 0x00000000,
+	0x458, 0x00000041,
+	0x459, 0x000000a8,
+	0x45a, 0x00000072,
+	0x45b, 0x000000b9,
+	0x460, 0x00000088,
+	0x461, 0x00000088,
+	0x462, 0x00000006,
+	0x463, 0x00000003,
+	0x4c8, 0x00000004,
+	0x4c9, 0x00000008,
+	0x4cc, 0x00000002,
+	0x4cd, 0x00000028,
+	0x4ce, 0x00000001,
+	0x500, 0x00000026,
+	0x501, 0x000000a2,
+	0x502, 0x0000002f,
+	0x503, 0x00000000,
+	0x504, 0x00000028,
+	0x505, 0x000000a3,
+	0x506, 0x0000005e,
+	0x507, 0x00000000,
+	0x508, 0x0000002b,
+	0x509, 0x000000a4,
+	0x50a, 0x0000005e,
+	0x50b, 0x00000000,
+	0x50c, 0x0000004f,
+	0x50d, 0x000000a4,
+	0x50e, 0x00000000,
+	0x50f, 0x00000000,
+	0x512, 0x0000001c,
+	0x514, 0x0000000a,
+	0x515, 0x00000010,
+	0x516, 0x0000000a,
+	0x517, 0x00000010,
+	0x51a, 0x00000016,
+	0x524, 0x0000000f,
+	0x525, 0x0000004f,
+	0x546, 0x00000020,
+	0x547, 0x00000000,
+	0x559, 0x00000002,
+	0x55a, 0x00000002,
+	0x55d, 0x000000ff,
+	0x605, 0x00000030,
+	0x608, 0x0000000e,
+	0x609, 0x0000002a,
+	0x652, 0x00000020,
+	0x63c, 0x0000000a,
+	0x63d, 0x0000000a,
+	0x700, 0x00000021,
+	0x701, 0x00000043,
+	0x702, 0x00000065,
+	0x703, 0x00000087,
+	0x708, 0x00000021,
+	0x709, 0x00000043,
+	0x70a, 0x00000065,
+	0x70b, 0x00000087,
+};
+
+u32 RTL8192CEAGCTAB_2TARRAY[AGCTAB_2TARRAYLENGTH] = {
+	0xc78, 0x7b000001,
+	0xc78, 0x7b010001,
+	0xc78, 0x7b020001,
+	0xc78, 0x7b030001,
+	0xc78, 0x7b040001,
+	0xc78, 0x7b050001,
+	0xc78, 0x7a060001,
+	0xc78, 0x79070001,
+	0xc78, 0x78080001,
+	0xc78, 0x77090001,
+	0xc78, 0x760a0001,
+	0xc78, 0x750b0001,
+	0xc78, 0x740c0001,
+	0xc78, 0x730d0001,
+	0xc78, 0x720e0001,
+	0xc78, 0x710f0001,
+	0xc78, 0x70100001,
+	0xc78, 0x6f110001,
+	0xc78, 0x6e120001,
+	0xc78, 0x6d130001,
+	0xc78, 0x6c140001,
+	0xc78, 0x6b150001,
+	0xc78, 0x6a160001,
+	0xc78, 0x69170001,
+	0xc78, 0x68180001,
+	0xc78, 0x67190001,
+	0xc78, 0x661a0001,
+	0xc78, 0x651b0001,
+	0xc78, 0x641c0001,
+	0xc78, 0x631d0001,
+	0xc78, 0x621e0001,
+	0xc78, 0x611f0001,
+	0xc78, 0x60200001,
+	0xc78, 0x49210001,
+	0xc78, 0x48220001,
+	0xc78, 0x47230001,
+	0xc78, 0x46240001,
+	0xc78, 0x45250001,
+	0xc78, 0x44260001,
+	0xc78, 0x43270001,
+	0xc78, 0x42280001,
+	0xc78, 0x41290001,
+	0xc78, 0x402a0001,
+	0xc78, 0x262b0001,
+	0xc78, 0x252c0001,
+	0xc78, 0x242d0001,
+	0xc78, 0x232e0001,
+	0xc78, 0x222f0001,
+	0xc78, 0x21300001,
+	0xc78, 0x20310001,
+	0xc78, 0x06320001,
+	0xc78, 0x05330001,
+	0xc78, 0x04340001,
+	0xc78, 0x03350001,
+	0xc78, 0x02360001,
+	0xc78, 0x01370001,
+	0xc78, 0x00380001,
+	0xc78, 0x00390001,
+	0xc78, 0x003a0001,
+	0xc78, 0x003b0001,
+	0xc78, 0x003c0001,
+	0xc78, 0x003d0001,
+	0xc78, 0x003e0001,
+	0xc78, 0x003f0001,
+	0xc78, 0x7b400001,
+	0xc78, 0x7b410001,
+	0xc78, 0x7b420001,
+	0xc78, 0x7b430001,
+	0xc78, 0x7b440001,
+	0xc78, 0x7b450001,
+	0xc78, 0x7a460001,
+	0xc78, 0x79470001,
+	0xc78, 0x78480001,
+	0xc78, 0x77490001,
+	0xc78, 0x764a0001,
+	0xc78, 0x754b0001,
+	0xc78, 0x744c0001,
+	0xc78, 0x734d0001,
+	0xc78, 0x724e0001,
+	0xc78, 0x714f0001,
+	0xc78, 0x70500001,
+	0xc78, 0x6f510001,
+	0xc78, 0x6e520001,
+	0xc78, 0x6d530001,
+	0xc78, 0x6c540001,
+	0xc78, 0x6b550001,
+	0xc78, 0x6a560001,
+	0xc78, 0x69570001,
+	0xc78, 0x68580001,
+	0xc78, 0x67590001,
+	0xc78, 0x665a0001,
+	0xc78, 0x655b0001,
+	0xc78, 0x645c0001,
+	0xc78, 0x635d0001,
+	0xc78, 0x625e0001,
+	0xc78, 0x615f0001,
+	0xc78, 0x60600001,
+	0xc78, 0x49610001,
+	0xc78, 0x48620001,
+	0xc78, 0x47630001,
+	0xc78, 0x46640001,
+	0xc78, 0x45650001,
+	0xc78, 0x44660001,
+	0xc78, 0x43670001,
+	0xc78, 0x42680001,
+	0xc78, 0x41690001,
+	0xc78, 0x406a0001,
+	0xc78, 0x266b0001,
+	0xc78, 0x256c0001,
+	0xc78, 0x246d0001,
+	0xc78, 0x236e0001,
+	0xc78, 0x226f0001,
+	0xc78, 0x21700001,
+	0xc78, 0x20710001,
+	0xc78, 0x06720001,
+	0xc78, 0x05730001,
+	0xc78, 0x04740001,
+	0xc78, 0x03750001,
+	0xc78, 0x02760001,
+	0xc78, 0x01770001,
+	0xc78, 0x00780001,
+	0xc78, 0x00790001,
+	0xc78, 0x007a0001,
+	0xc78, 0x007b0001,
+	0xc78, 0x007c0001,
+	0xc78, 0x007d0001,
+	0xc78, 0x007e0001,
+	0xc78, 0x007f0001,
+	0xc78, 0x3800001e,
+	0xc78, 0x3801001e,
+	0xc78, 0x3802001e,
+	0xc78, 0x3803001e,
+	0xc78, 0x3804001e,
+	0xc78, 0x3805001e,
+	0xc78, 0x3806001e,
+	0xc78, 0x3807001e,
+	0xc78, 0x3808001e,
+	0xc78, 0x3c09001e,
+	0xc78, 0x3e0a001e,
+	0xc78, 0x400b001e,
+	0xc78, 0x440c001e,
+	0xc78, 0x480d001e,
+	0xc78, 0x4c0e001e,
+	0xc78, 0x500f001e,
+	0xc78, 0x5210001e,
+	0xc78, 0x5611001e,
+	0xc78, 0x5a12001e,
+	0xc78, 0x5e13001e,
+	0xc78, 0x6014001e,
+	0xc78, 0x6015001e,
+	0xc78, 0x6016001e,
+	0xc78, 0x6217001e,
+	0xc78, 0x6218001e,
+	0xc78, 0x6219001e,
+	0xc78, 0x621a001e,
+	0xc78, 0x621b001e,
+	0xc78, 0x621c001e,
+	0xc78, 0x621d001e,
+	0xc78, 0x621e001e,
+	0xc78, 0x621f001e,
+};
+
+u32 RTL8192CEAGCTAB_1TARRAY[AGCTAB_1TARRAYLENGTH] = {
+	0xc78, 0x7b000001,
+	0xc78, 0x7b010001,
+	0xc78, 0x7b020001,
+	0xc78, 0x7b030001,
+	0xc78, 0x7b040001,
+	0xc78, 0x7b050001,
+	0xc78, 0x7a060001,
+	0xc78, 0x79070001,
+	0xc78, 0x78080001,
+	0xc78, 0x77090001,
+	0xc78, 0x760a0001,
+	0xc78, 0x750b0001,
+	0xc78, 0x740c0001,
+	0xc78, 0x730d0001,
+	0xc78, 0x720e0001,
+	0xc78, 0x710f0001,
+	0xc78, 0x70100001,
+	0xc78, 0x6f110001,
+	0xc78, 0x6e120001,
+	0xc78, 0x6d130001,
+	0xc78, 0x6c140001,
+	0xc78, 0x6b150001,
+	0xc78, 0x6a160001,
+	0xc78, 0x69170001,
+	0xc78, 0x68180001,
+	0xc78, 0x67190001,
+	0xc78, 0x661a0001,
+	0xc78, 0x651b0001,
+	0xc78, 0x641c0001,
+	0xc78, 0x631d0001,
+	0xc78, 0x621e0001,
+	0xc78, 0x611f0001,
+	0xc78, 0x60200001,
+	0xc78, 0x49210001,
+	0xc78, 0x48220001,
+	0xc78, 0x47230001,
+	0xc78, 0x46240001,
+	0xc78, 0x45250001,
+	0xc78, 0x44260001,
+	0xc78, 0x43270001,
+	0xc78, 0x42280001,
+	0xc78, 0x41290001,
+	0xc78, 0x402a0001,
+	0xc78, 0x262b0001,
+	0xc78, 0x252c0001,
+	0xc78, 0x242d0001,
+	0xc78, 0x232e0001,
+	0xc78, 0x222f0001,
+	0xc78, 0x21300001,
+	0xc78, 0x20310001,
+	0xc78, 0x06320001,
+	0xc78, 0x05330001,
+	0xc78, 0x04340001,
+	0xc78, 0x03350001,
+	0xc78, 0x02360001,
+	0xc78, 0x01370001,
+	0xc78, 0x00380001,
+	0xc78, 0x00390001,
+	0xc78, 0x003a0001,
+	0xc78, 0x003b0001,
+	0xc78, 0x003c0001,
+	0xc78, 0x003d0001,
+	0xc78, 0x003e0001,
+	0xc78, 0x003f0001,
+	0xc78, 0x7b400001,
+	0xc78, 0x7b410001,
+	0xc78, 0x7b420001,
+	0xc78, 0x7b430001,
+	0xc78, 0x7b440001,
+	0xc78, 0x7b450001,
+	0xc78, 0x7a460001,
+	0xc78, 0x79470001,
+	0xc78, 0x78480001,
+	0xc78, 0x77490001,
+	0xc78, 0x764a0001,
+	0xc78, 0x754b0001,
+	0xc78, 0x744c0001,
+	0xc78, 0x734d0001,
+	0xc78, 0x724e0001,
+	0xc78, 0x714f0001,
+	0xc78, 0x70500001,
+	0xc78, 0x6f510001,
+	0xc78, 0x6e520001,
+	0xc78, 0x6d530001,
+	0xc78, 0x6c540001,
+	0xc78, 0x6b550001,
+	0xc78, 0x6a560001,
+	0xc78, 0x69570001,
+	0xc78, 0x68580001,
+	0xc78, 0x67590001,
+	0xc78, 0x665a0001,
+	0xc78, 0x655b0001,
+	0xc78, 0x645c0001,
+	0xc78, 0x635d0001,
+	0xc78, 0x625e0001,
+	0xc78, 0x615f0001,
+	0xc78, 0x60600001,
+	0xc78, 0x49610001,
+	0xc78, 0x48620001,
+	0xc78, 0x47630001,
+	0xc78, 0x46640001,
+	0xc78, 0x45650001,
+	0xc78, 0x44660001,
+	0xc78, 0x43670001,
+	0xc78, 0x42680001,
+	0xc78, 0x41690001,
+	0xc78, 0x406a0001,
+	0xc78, 0x266b0001,
+	0xc78, 0x256c0001,
+	0xc78, 0x246d0001,
+	0xc78, 0x236e0001,
+	0xc78, 0x226f0001,
+	0xc78, 0x21700001,
+	0xc78, 0x20710001,
+	0xc78, 0x06720001,
+	0xc78, 0x05730001,
+	0xc78, 0x04740001,
+	0xc78, 0x03750001,
+	0xc78, 0x02760001,
+	0xc78, 0x01770001,
+	0xc78, 0x00780001,
+	0xc78, 0x00790001,
+	0xc78, 0x007a0001,
+	0xc78, 0x007b0001,
+	0xc78, 0x007c0001,
+	0xc78, 0x007d0001,
+	0xc78, 0x007e0001,
+	0xc78, 0x007f0001,
+	0xc78, 0x3800001e,
+	0xc78, 0x3801001e,
+	0xc78, 0x3802001e,
+	0xc78, 0x3803001e,
+	0xc78, 0x3804001e,
+	0xc78, 0x3805001e,
+	0xc78, 0x3806001e,
+	0xc78, 0x3807001e,
+	0xc78, 0x3808001e,
+	0xc78, 0x3c09001e,
+	0xc78, 0x3e0a001e,
+	0xc78, 0x400b001e,
+	0xc78, 0x440c001e,
+	0xc78, 0x480d001e,
+	0xc78, 0x4c0e001e,
+	0xc78, 0x500f001e,
+	0xc78, 0x5210001e,
+	0xc78, 0x5611001e,
+	0xc78, 0x5a12001e,
+	0xc78, 0x5e13001e,
+	0xc78, 0x6014001e,
+	0xc78, 0x6015001e,
+	0xc78, 0x6016001e,
+	0xc78, 0x6217001e,
+	0xc78, 0x6218001e,
+	0xc78, 0x6219001e,
+	0xc78, 0x621a001e,
+	0xc78, 0x621b001e,
+	0xc78, 0x621c001e,
+	0xc78, 0x621d001e,
+	0xc78, 0x621e001e,
+	0xc78, 0x621f001e,
+};
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/table.h b/drivers/net/wireless/rtlwifi/rtl8192ce/table.h
new file mode 100644
index 00000000000..3a6e8b6aeee
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/table.h
@@ -0,0 +1,58 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Created on  2010/ 5/18,  1:41
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92CE_TABLE__H_
+#define __RTL92CE_TABLE__H_
+
+#include <linux/types.h>
+
+#define PHY_REG_2TARRAY_LENGTH	374
+extern u32 RTL8192CEPHY_REG_2TARRAY[PHY_REG_2TARRAY_LENGTH];
+#define PHY_REG_1TARRAY_LENGTH	374
+extern u32 RTL8192CEPHY_REG_1TARRAY[PHY_REG_1TARRAY_LENGTH];
+#define PHY_REG_ARRAY_PGLENGTH	192
+extern u32 RTL8192CEPHY_REG_ARRAY_PG[PHY_REG_ARRAY_PGLENGTH];
+#define RADIOA_2TARRAYLENGTH	282
+extern u32 RTL8192CERADIOA_2TARRAY[RADIOA_2TARRAYLENGTH];
+#define RADIOB_2TARRAYLENGTH	78
+extern u32 RTL8192CE_RADIOB_2TARRAY[RADIOB_2TARRAYLENGTH];
+#define RADIOA_1TARRAYLENGTH	282
+extern u32 RTL8192CE_RADIOA_1TARRAY[RADIOA_1TARRAYLENGTH];
+#define RADIOB_1TARRAYLENGTH	1
+extern u32 RTL8192CE_RADIOB_1TARRAY[RADIOB_1TARRAYLENGTH];
+#define MAC_2T_ARRAYLENGTH	162
+extern u32 RTL8192CEMAC_2T_ARRAY[MAC_2T_ARRAYLENGTH];
+#define AGCTAB_2TARRAYLENGTH	320
+extern u32 RTL8192CEAGCTAB_2TARRAY[AGCTAB_2TARRAYLENGTH];
+#define AGCTAB_1TARRAYLENGTH	320
+extern u32 RTL8192CEAGCTAB_1TARRAY[AGCTAB_1TARRAYLENGTH];
+
+#endif
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
new file mode 100644
index 00000000000..bf5852f2d63
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c
@@ -0,0 +1,1031 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../base.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "trx.h"
+#include "led.h"
+
+static enum rtl_desc_qsel _rtl92ce_map_hwqueue_to_fwqueue(u16 fc,
+							  unsigned int
+							  skb_queue)
+{
+	enum rtl_desc_qsel qsel;
+
+	if (unlikely(ieee80211_is_beacon(fc))) {
+		qsel = QSLT_BEACON;
+		return qsel;
+	}
+
+	if (ieee80211_is_mgmt(fc)) {
+		qsel = QSLT_MGNT;
+		return qsel;
+	}
+
+	switch (skb_queue) {
+	case VO_QUEUE:
+		qsel = QSLT_VO;
+		break;
+	case VI_QUEUE:
+		qsel = QSLT_VI;
+		break;
+	case BE_QUEUE:
+		qsel = QSLT_BE;
+		break;
+	case BK_QUEUE:
+		qsel = QSLT_BK;
+		break;
+	default:
+		qsel = QSLT_BE;
+		RT_ASSERT(false, ("BE queue, skb_queue:%d,"
+				  " set qsel = 0x%X\n", skb_queue, QSLT_BE));
+		break;
+	}
+	return qsel;
+}
+
+static int _rtl92ce_rate_mapping(bool isht, u8 desc_rate, bool first_ampdu)
+{
+	int rate_idx;
+
+	if (first_ampdu) {
+		if (false == isht) {
+			switch (desc_rate) {
+			case DESC92C_RATE1M:
+				rate_idx = 0;
+				break;
+			case DESC92C_RATE2M:
+				rate_idx = 1;
+				break;
+			case DESC92C_RATE5_5M:
+				rate_idx = 2;
+				break;
+			case DESC92C_RATE11M:
+				rate_idx = 3;
+				break;
+			case DESC92C_RATE6M:
+				rate_idx = 4;
+				break;
+			case DESC92C_RATE9M:
+				rate_idx = 5;
+				break;
+			case DESC92C_RATE12M:
+				rate_idx = 6;
+				break;
+			case DESC92C_RATE18M:
+				rate_idx = 7;
+				break;
+			case DESC92C_RATE24M:
+				rate_idx = 8;
+				break;
+			case DESC92C_RATE36M:
+				rate_idx = 9;
+				break;
+			case DESC92C_RATE48M:
+				rate_idx = 10;
+				break;
+			case DESC92C_RATE54M:
+				rate_idx = 11;
+				break;
+			default:
+				rate_idx = 0;
+				break;
+			}
+		} else {
+			rate_idx = 11;
+		}
+
+		return rate_idx;
+	}
+
+	switch (desc_rate) {
+	case DESC92C_RATE1M:
+		rate_idx = 0;
+		break;
+	case DESC92C_RATE2M:
+		rate_idx = 1;
+		break;
+	case DESC92C_RATE5_5M:
+		rate_idx = 2;
+		break;
+	case DESC92C_RATE11M:
+		rate_idx = 3;
+		break;
+	case DESC92C_RATE6M:
+		rate_idx = 4;
+		break;
+	case DESC92C_RATE9M:
+		rate_idx = 5;
+		break;
+	case DESC92C_RATE12M:
+		rate_idx = 6;
+		break;
+	case DESC92C_RATE18M:
+		rate_idx = 7;
+		break;
+	case DESC92C_RATE24M:
+		rate_idx = 8;
+		break;
+	case DESC92C_RATE36M:
+		rate_idx = 9;
+		break;
+	case DESC92C_RATE48M:
+		rate_idx = 10;
+		break;
+	case DESC92C_RATE54M:
+		rate_idx = 11;
+		break;
+	default:
+		rate_idx = 11;
+		break;
+	}
+	return rate_idx;
+}
+
+static u8 _rtl92c_query_rxpwrpercentage(char antpower)
+{
+	if ((antpower <= -100) || (antpower >= 20))
+		return 0;
+	else if (antpower >= 0)
+		return 100;
+	else
+		return 100 + antpower;
+}
+
+static u8 _rtl92c_evm_db_to_percentage(char value)
+{
+	char ret_val;
+	ret_val = value;
+
+	if (ret_val >= 0)
+		ret_val = 0;
+
+	if (ret_val <= -33)
+		ret_val = -33;
+
+	ret_val = 0 - ret_val;
+	ret_val *= 3;
+
+	if (ret_val == 99)
+		ret_val = 100;
+
+	return ret_val;
+}
+
+static long _rtl92ce_translate_todbm(struct ieee80211_hw *hw,
+				     u8 signal_strength_index)
+{
+	long signal_power;
+
+	signal_power = (long)((signal_strength_index + 1) >> 1);
+	signal_power -= 95;
+	return signal_power;
+}
+
+static long _rtl92ce_signal_scale_mapping(struct ieee80211_hw *hw,
+		long currsig)
+{
+	long retsig;
+
+	if (currsig >= 61 && currsig <= 100)
+		retsig = 90 + ((currsig - 60) / 4);
+	else if (currsig >= 41 && currsig <= 60)
+		retsig = 78 + ((currsig - 40) / 2);
+	else if (currsig >= 31 && currsig <= 40)
+		retsig = 66 + (currsig - 30);
+	else if (currsig >= 21 && currsig <= 30)
+		retsig = 54 + (currsig - 20);
+	else if (currsig >= 5 && currsig <= 20)
+		retsig = 42 + (((currsig - 5) * 2) / 3);
+	else if (currsig == 4)
+		retsig = 36;
+	else if (currsig == 3)
+		retsig = 27;
+	else if (currsig == 2)
+		retsig = 18;
+	else if (currsig == 1)
+		retsig = 9;
+	else
+		retsig = currsig;
+
+	return retsig;
+}
+
+static void _rtl92ce_query_rxphystatus(struct ieee80211_hw *hw,
+				       struct rtl_stats *pstats,
+				       struct rx_desc_92c *pdesc,
+				       struct rx_fwinfo_92c *p_drvinfo,
+				       bool bpacket_match_bssid,
+				       bool bpacket_toself,
+				       bool b_packet_beacon)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct phy_sts_cck_8192s_t *cck_buf;
+	s8 rx_pwr_all, rx_pwr[4];
+	u8 rf_rx_num, evm, pwdb_all;
+	u8 i, max_spatial_stream;
+	u32 rssi, total_rssi;
+	bool is_cck_rate;
+
+	is_cck_rate = RX_HAL_IS_CCK_RATE(pdesc);
+	pstats->b_packet_matchbssid = bpacket_match_bssid;
+	pstats->b_packet_toself = bpacket_toself;
+	pstats->b_is_cck = is_cck_rate;
+	pstats->b_packet_beacon = b_packet_beacon;
+	pstats->b_is_cck = is_cck_rate;
+	pstats->rx_mimo_signalquality[0] = -1;
+	pstats->rx_mimo_signalquality[1] = -1;
+
+	if (is_cck_rate) {
+		u8 report, cck_highpwr;
+		cck_buf = (struct phy_sts_cck_8192s_t *)p_drvinfo;
+
+		cck_highpwr = (u8) rtl_get_bbreg(hw,
+					 RFPGA0_XA_HSSIPARAMETER2,
+					 BIT(9));
+		if (!cck_highpwr) {
+			u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
+			report = cck_buf->cck_agc_rpt & 0xc0;
+			report = report >> 6;
+			switch (report) {
+			case 0x3:
+				rx_pwr_all = -46 - (cck_agc_rpt & 0x3e);
+				break;
+			case 0x2:
+				rx_pwr_all = -26 - (cck_agc_rpt & 0x3e);
+				break;
+			case 0x1:
+				rx_pwr_all = -12 - (cck_agc_rpt & 0x3e);
+				break;
+			case 0x0:
+				rx_pwr_all = 16 - (cck_agc_rpt & 0x3e);
+				break;
+			}
+		} else {
+			u8 cck_agc_rpt = cck_buf->cck_agc_rpt;
+			report = p_drvinfo->cfosho[0] & 0x60;
+			report = report >> 5;
+			switch (report) {
+			case 0x3:
+				rx_pwr_all = -46 - ((cck_agc_rpt & 0x1f) << 1);
+				break;
+			case 0x2:
+				rx_pwr_all = -26 - ((cck_agc_rpt & 0x1f) << 1);
+				break;
+			case 0x1:
+				rx_pwr_all = -12 - ((cck_agc_rpt & 0x1f) << 1);
+				break;
+			case 0x0:
+				rx_pwr_all = 16 - ((cck_agc_rpt & 0x1f) << 1);
+				break;
+			}
+		}
+
+		pwdb_all = _rtl92c_query_rxpwrpercentage(rx_pwr_all);
+		pstats->rx_pwdb_all = pwdb_all;
+		pstats->recvsignalpower = rx_pwr_all;
+
+		if (bpacket_match_bssid) {
+			u8 sq;
+			if (pstats->rx_pwdb_all > 40)
+				sq = 100;
+			else {
+				sq = cck_buf->sq_rpt;
+				if (sq > 64)
+					sq = 0;
+				else if (sq < 20)
+					sq = 100;
+				else
+					sq = ((64 - sq) * 100) / 44;
+			}
+
+			pstats->signalquality = sq;
+			pstats->rx_mimo_signalquality[0] = sq;
+			pstats->rx_mimo_signalquality[1] = -1;
+		}
+	} else {
+		rtlpriv->dm.brfpath_rxenable[0] =
+		    rtlpriv->dm.brfpath_rxenable[1] = true;
+		for (i = RF90_PATH_A; i < RF90_PATH_MAX; i++) {
+			if (rtlpriv->dm.brfpath_rxenable[i])
+				rf_rx_num++;
+
+			rx_pwr[i] =
+			    ((p_drvinfo->gain_trsw[i] & 0x3f) * 2) - 110;
+			rssi = _rtl92c_query_rxpwrpercentage(rx_pwr[i]);
+			total_rssi += rssi;
+			rtlpriv->stats.rx_snr_db[i] =
+			    (long)(p_drvinfo->rxsnr[i] / 2);
+
+			if (bpacket_match_bssid)
+				pstats->rx_mimo_signalstrength[i] = (u8) rssi;
+		}
+
+		rx_pwr_all = ((p_drvinfo->pwdb_all >> 1) & 0x7f) - 110;
+		pwdb_all = _rtl92c_query_rxpwrpercentage(rx_pwr_all);
+		pstats->rx_pwdb_all = pwdb_all;
+		pstats->rxpower = rx_pwr_all;
+		pstats->recvsignalpower = rx_pwr_all;
+
+		if (pdesc->rxht && pdesc->rxmcs >= DESC92C_RATEMCS8 &&
+		    pdesc->rxmcs <= DESC92C_RATEMCS15)
+			max_spatial_stream = 2;
+		else
+			max_spatial_stream = 1;
+
+		for (i = 0; i < max_spatial_stream; i++) {
+			evm = _rtl92c_evm_db_to_percentage(p_drvinfo->rxevm[i]);
+
+			if (bpacket_match_bssid) {
+				if (i == 0)
+					pstats->signalquality =
+					    (u8) (evm & 0xff);
+				pstats->rx_mimo_signalquality[i] =
+				    (u8) (evm & 0xff);
+			}
+		}
+	}
+
+	if (is_cck_rate)
+		pstats->signalstrength =
+		    (u8) (_rtl92ce_signal_scale_mapping(hw, pwdb_all));
+	else if (rf_rx_num != 0)
+		pstats->signalstrength =
+		    (u8) (_rtl92ce_signal_scale_mapping
+			  (hw, total_rssi /= rf_rx_num));
+}
+
+static void _rtl92ce_process_ui_rssi(struct ieee80211_hw *hw,
+		struct rtl_stats *pstats)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_phy *rtlphy = &(rtlpriv->phy);
+	u8 rfpath;
+	u32 last_rssi, tmpval;
+
+	if (pstats->b_packet_toself || pstats->b_packet_beacon) {
+		rtlpriv->stats.rssi_calculate_cnt++;
+
+		if (rtlpriv->stats.ui_rssi.total_num++ >=
+		    PHY_RSSI_SLID_WIN_MAX) {
+			rtlpriv->stats.ui_rssi.total_num =
+			    PHY_RSSI_SLID_WIN_MAX;
+			last_rssi =
+			    rtlpriv->stats.ui_rssi.elements[rtlpriv->
+						    stats.ui_rssi.index];
+			rtlpriv->stats.ui_rssi.total_val -= last_rssi;
+		}
+
+		rtlpriv->stats.ui_rssi.total_val += pstats->signalstrength;
+		rtlpriv->stats.ui_rssi.elements[rtlpriv->stats.ui_rssi.
+						index++] =
+		    pstats->signalstrength;
+
+		if (rtlpriv->stats.ui_rssi.index >= PHY_RSSI_SLID_WIN_MAX)
+			rtlpriv->stats.ui_rssi.index = 0;
+
+		tmpval = rtlpriv->stats.ui_rssi.total_val /
+		    rtlpriv->stats.ui_rssi.total_num;
+		rtlpriv->stats.signal_strength =
+		    _rtl92ce_translate_todbm(hw, (u8) tmpval);
+		pstats->rssi = rtlpriv->stats.signal_strength;
+	}
+
+	if (!pstats->b_is_cck && pstats->b_packet_toself) {
+		for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath;
+		     rfpath++) {
+
+			if (!rtl8192_phy_check_is_legal_rfpath(hw, rfpath))
+				continue;
+
+			if (rtlpriv->stats.rx_rssi_percentage[rfpath] == 0) {
+				rtlpriv->stats.rx_rssi_percentage[rfpath] =
+				    pstats->rx_mimo_signalstrength[rfpath];
+
+			}
+
+			if (pstats->rx_mimo_signalstrength[rfpath] >
+			    rtlpriv->stats.rx_rssi_percentage[rfpath]) {
+				rtlpriv->stats.rx_rssi_percentage[rfpath] =
+				    ((rtlpriv->stats.
+				      rx_rssi_percentage[rfpath] *
+				      (RX_SMOOTH_FACTOR - 1)) +
+				     (pstats->rx_mimo_signalstrength[rfpath])) /
+				    (RX_SMOOTH_FACTOR);
+
+				rtlpriv->stats.rx_rssi_percentage[rfpath] =
+				    rtlpriv->stats.rx_rssi_percentage[rfpath] +
+				    1;
+			} else {
+				rtlpriv->stats.rx_rssi_percentage[rfpath] =
+				    ((rtlpriv->stats.
+				      rx_rssi_percentage[rfpath] *
+				      (RX_SMOOTH_FACTOR - 1)) +
+				     (pstats->rx_mimo_signalstrength[rfpath])) /
+				    (RX_SMOOTH_FACTOR);
+			}
+
+		}
+	}
+}
+
+static void _rtl92ce_update_rxsignalstatistics(struct ieee80211_hw *hw,
+					       struct rtl_stats *pstats)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	int weighting;
+
+	if (rtlpriv->stats.recv_signal_power == 0)
+		rtlpriv->stats.recv_signal_power = pstats->recvsignalpower;
+
+	if (pstats->recvsignalpower > rtlpriv->stats.recv_signal_power)
+		weighting = 5;
+
+	else if (pstats->recvsignalpower < rtlpriv->stats.recv_signal_power)
+		weighting = (-5);
+
+	rtlpriv->stats.recv_signal_power =
+	    (rtlpriv->stats.recv_signal_power * 5 +
+	     pstats->recvsignalpower + weighting) / 6;
+}
+
+static void _rtl92ce_process_pwdb(struct ieee80211_hw *hw,
+		struct rtl_stats *pstats)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	long undecorated_smoothed_pwdb;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC) {
+		return;
+	} else {
+		undecorated_smoothed_pwdb =
+		    rtlpriv->dm.undecorated_smoothed_pwdb;
+	}
+
+	if (pstats->b_packet_toself || pstats->b_packet_beacon) {
+		if (undecorated_smoothed_pwdb < 0)
+			undecorated_smoothed_pwdb = pstats->rx_pwdb_all;
+
+		if (pstats->rx_pwdb_all > (u32) undecorated_smoothed_pwdb) {
+			undecorated_smoothed_pwdb =
+			    (((undecorated_smoothed_pwdb) *
+			      (RX_SMOOTH_FACTOR - 1)) +
+			     (pstats->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
+
+			undecorated_smoothed_pwdb = undecorated_smoothed_pwdb
+			    + 1;
+		} else {
+			undecorated_smoothed_pwdb =
+			    (((undecorated_smoothed_pwdb) *
+			      (RX_SMOOTH_FACTOR - 1)) +
+			     (pstats->rx_pwdb_all)) / (RX_SMOOTH_FACTOR);
+		}
+
+		rtlpriv->dm.undecorated_smoothed_pwdb =
+		    undecorated_smoothed_pwdb;
+		_rtl92ce_update_rxsignalstatistics(hw, pstats);
+	}
+}
+
+static void _rtl92ce_process_ui_link_quality(struct ieee80211_hw *hw,
+					     struct rtl_stats *pstats)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	u32 last_evm, n_spatialstream, tmpval;
+
+	if (pstats->signalquality != 0) {
+		if (pstats->b_packet_toself || pstats->b_packet_beacon) {
+
+			if (rtlpriv->stats.ui_link_quality.total_num++ >=
+			    PHY_LINKQUALITY_SLID_WIN_MAX) {
+				rtlpriv->stats.ui_link_quality.total_num =
+				    PHY_LINKQUALITY_SLID_WIN_MAX;
+				last_evm =
+				    rtlpriv->stats.
+				    ui_link_quality.elements[rtlpriv->
+							  stats.ui_link_quality.
+							  index];
+				rtlpriv->stats.ui_link_quality.total_val -=
+				    last_evm;
+			}
+
+			rtlpriv->stats.ui_link_quality.total_val +=
+			    pstats->signalquality;
+			rtlpriv->stats.ui_link_quality.elements[rtlpriv->stats.
+								ui_link_quality.
+								index++] =
+			    pstats->signalquality;
+
+			if (rtlpriv->stats.ui_link_quality.index >=
+			    PHY_LINKQUALITY_SLID_WIN_MAX)
+				rtlpriv->stats.ui_link_quality.index = 0;
+
+			tmpval = rtlpriv->stats.ui_link_quality.total_val /
+			    rtlpriv->stats.ui_link_quality.total_num;
+			rtlpriv->stats.signal_quality = tmpval;
+
+			rtlpriv->stats.last_sigstrength_inpercent = tmpval;
+
+			for (n_spatialstream = 0; n_spatialstream < 2;
+			     n_spatialstream++) {
+				if (pstats->
+				    rx_mimo_signalquality[n_spatialstream] !=
+				    -1) {
+					if (rtlpriv->stats.
+					    rx_evm_percentage[n_spatialstream]
+					    == 0) {
+						rtlpriv->stats.
+						   rx_evm_percentage
+						   [n_spatialstream] =
+						   pstats->rx_mimo_signalquality
+						   [n_spatialstream];
+					}
+
+					rtlpriv->stats.
+					    rx_evm_percentage[n_spatialstream] =
+					    ((rtlpriv->
+					      stats.rx_evm_percentage
+					      [n_spatialstream] *
+					      (RX_SMOOTH_FACTOR - 1)) +
+					     (pstats->
+					      rx_mimo_signalquality
+					      [n_spatialstream] * 1)) /
+					    (RX_SMOOTH_FACTOR);
+				}
+			}
+		}
+	} else {
+		;
+	}
+}
+
+static void _rtl92ce_process_phyinfo(struct ieee80211_hw *hw,
+				     u8 *buffer,
+				     struct rtl_stats *pcurrent_stats)
+{
+
+	if (!pcurrent_stats->b_packet_matchbssid &&
+	    !pcurrent_stats->b_packet_beacon)
+		return;
+
+	_rtl92ce_process_ui_rssi(hw, pcurrent_stats);
+	_rtl92ce_process_pwdb(hw, pcurrent_stats);
+	_rtl92ce_process_ui_link_quality(hw, pcurrent_stats);
+}
+
+static void _rtl92ce_translate_rx_signal_stuff(struct ieee80211_hw *hw,
+					       struct sk_buff *skb,
+					       struct rtl_stats *pstats,
+					       struct rx_desc_92c *pdesc,
+					       struct rx_fwinfo_92c *p_drvinfo)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+
+	struct ieee80211_hdr *hdr;
+	u8 *tmp_buf;
+	u8 *praddr;
+	u8 *psaddr;
+	u16 fc, type;
+	bool b_packet_matchbssid, b_packet_toself, b_packet_beacon;
+
+	tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift;
+
+	hdr = (struct ieee80211_hdr *)tmp_buf;
+	fc = le16_to_cpu(hdr->frame_control);
+	type = WLAN_FC_GET_TYPE(fc);
+	praddr = hdr->addr1;
+	psaddr = hdr->addr2;
+
+	b_packet_matchbssid =
+	    ((IEEE80211_FTYPE_CTL != type) &&
+	     (!compare_ether_addr(mac->bssid,
+				  (fc & IEEE80211_FCTL_TODS) ?
+				  hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS) ?
+				  hdr->addr2 : hdr->addr3)) &&
+	     (!pstats->b_hwerror) && (!pstats->b_crc) && (!pstats->b_icv));
+
+	b_packet_toself = b_packet_matchbssid &&
+	    (!compare_ether_addr(praddr, rtlefuse->dev_addr));
+
+	if (ieee80211_is_beacon(fc))
+		b_packet_beacon = true;
+
+	_rtl92ce_query_rxphystatus(hw, pstats, pdesc, p_drvinfo,
+				   b_packet_matchbssid, b_packet_toself,
+				   b_packet_beacon);
+
+	_rtl92ce_process_phyinfo(hw, tmp_buf, pstats);
+}
+
+bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw,
+			   struct rtl_stats *stats,
+			   struct ieee80211_rx_status *rx_status,
+			   u8 *p_desc, struct sk_buff *skb)
+{
+	struct rx_fwinfo_92c *p_drvinfo;
+	struct rx_desc_92c *pdesc = (struct rx_desc_92c *)p_desc;
+
+	u32 phystatus = GET_RX_DESC_PHYST(pdesc);
+	stats->length = (u16) GET_RX_DESC_PKT_LEN(pdesc);
+	stats->rx_drvinfo_size = (u8) GET_RX_DESC_DRV_INFO_SIZE(pdesc) *
+	    RX_DRV_INFO_SIZE_UNIT;
+	stats->rx_bufshift = (u8) (GET_RX_DESC_SHIFT(pdesc) & 0x03);
+	stats->b_icv = (u16) GET_RX_DESC_ICV(pdesc);
+	stats->b_crc = (u16) GET_RX_DESC_CRC32(pdesc);
+	stats->b_hwerror = (stats->b_crc | stats->b_icv);
+	stats->decrypted = !GET_RX_DESC_SWDEC(pdesc);
+	stats->rate = (u8) GET_RX_DESC_RXMCS(pdesc);
+	stats->b_shortpreamble = (u16) GET_RX_DESC_SPLCP(pdesc);
+	stats->b_isampdu = (bool) (GET_RX_DESC_PAGGR(pdesc) == 1);
+	stats->b_isampdu = (bool) ((GET_RX_DESC_PAGGR(pdesc) == 1)
+				   && (GET_RX_DESC_FAGGR(pdesc) == 1));
+	stats->timestamp_low = GET_RX_DESC_TSFL(pdesc);
+	stats->rx_is40Mhzpacket = (bool) GET_RX_DESC_BW(pdesc);
+
+	rx_status->freq = hw->conf.channel->center_freq;
+	rx_status->band = hw->conf.channel->band;
+
+	if (GET_RX_DESC_CRC32(pdesc))
+		rx_status->flag |= RX_FLAG_FAILED_FCS_CRC;
+
+	if (!GET_RX_DESC_SWDEC(pdesc))
+		rx_status->flag |= RX_FLAG_DECRYPTED;
+
+	if (GET_RX_DESC_BW(pdesc))
+		rx_status->flag |= RX_FLAG_40MHZ;
+
+	if (GET_RX_DESC_RXHT(pdesc))
+		rx_status->flag |= RX_FLAG_HT;
+
+	rx_status->flag |= RX_FLAG_TSFT;
+
+	if (stats->decrypted)
+		rx_status->flag |= RX_FLAG_DECRYPTED;
+
+	rx_status->rate_idx = _rtl92ce_rate_mapping((bool)
+						    GET_RX_DESC_RXHT(pdesc),
+						    (u8)
+						    GET_RX_DESC_RXMCS(pdesc),
+						    (bool)
+						    GET_RX_DESC_PAGGR(pdesc));
+
+	rx_status->mactime = GET_RX_DESC_TSFL(pdesc);
+	if (phystatus == true) {
+		p_drvinfo = (struct rx_fwinfo_92c *)(skb->data +
+						     stats->rx_bufshift);
+
+		_rtl92ce_translate_rx_signal_stuff(hw,
+						   skb, stats, pdesc,
+						   p_drvinfo);
+	}
+
+	/*rx_status->qual = stats->signal; */
+	rx_status->signal = stats->rssi + 10;
+	/*rx_status->noise = -stats->noise; */
+
+	return true;
+}
+
+void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw,
+			  struct ieee80211_hdr *hdr, u8 *pdesc_tx,
+			  struct ieee80211_tx_info *info, struct sk_buff *skb,
+			  unsigned int queue_index)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	bool b_defaultadapter = true;
+
+	struct ieee80211_sta *sta = ieee80211_find_sta(mac->vif, mac->bssid);
+
+	u8 *pdesc = (u8 *) pdesc_tx;
+	struct rtl_tcb_desc tcb_desc;
+	u8 *qc = ieee80211_get_qos_ctl(hdr);
+	u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+	u16 seq_number;
+	u16 fc = le16_to_cpu(hdr->frame_control);
+	u8 rate_flag = info->control.rates[0].flags;
+
+	enum rtl_desc_qsel fw_qsel =
+	    _rtl92ce_map_hwqueue_to_fwqueue(le16_to_cpu(hdr->frame_control),
+					    queue_index);
+
+	bool b_firstseg = ((hdr->seq_ctrl &
+			    cpu_to_le16(IEEE80211_SCTL_FRAG)) == 0);
+
+	bool b_lastseg = ((hdr->frame_control &
+			   cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)) == 0);
+
+	dma_addr_t mapping = pci_map_single(rtlpci->pdev,
+					    skb->data, skb->len,
+					    PCI_DMA_TODEVICE);
+
+	seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
+
+	rtl_get_tcb_desc(hw, info, skb, &tcb_desc);
+
+	CLEAR_PCI_TX_DESC_CONTENT(pdesc, sizeof(struct tx_desc_92c));
+
+	if (b_firstseg) {
+		SET_TX_DESC_OFFSET(pdesc, USB_HWDESC_HEADER_LEN);
+
+		SET_TX_DESC_TX_RATE(pdesc, tcb_desc.hw_rate);
+
+		if (tcb_desc.use_shortgi || tcb_desc.use_shortpreamble)
+			SET_TX_DESC_DATA_SHORTGI(pdesc, 1);
+
+		if (mac->tids[tid].agg.agg_state == RTL_AGG_ON &&
+		    info->flags & IEEE80211_TX_CTL_AMPDU) {
+			SET_TX_DESC_AGG_BREAK(pdesc, 1);
+			SET_TX_DESC_MAX_AGG_NUM(pdesc, 0x14);
+		}
+		SET_TX_DESC_SEQ(pdesc, seq_number);
+
+		SET_TX_DESC_RTS_ENABLE(pdesc, ((tcb_desc.b_rts_enable &&
+						!tcb_desc.
+						b_cts_enable) ? 1 : 0));
+		SET_TX_DESC_HW_RTS_ENABLE(pdesc,
+					  ((tcb_desc.b_rts_enable
+					    || tcb_desc.b_cts_enable) ? 1 : 0));
+		SET_TX_DESC_CTS2SELF(pdesc, ((tcb_desc.b_cts_enable) ? 1 : 0));
+		SET_TX_DESC_RTS_STBC(pdesc, ((tcb_desc.b_rts_stbc) ? 1 : 0));
+
+		SET_TX_DESC_RTS_RATE(pdesc, tcb_desc.rts_rate);
+		SET_TX_DESC_RTS_BW(pdesc, 0);
+		SET_TX_DESC_RTS_SC(pdesc, tcb_desc.rts_sc);
+		SET_TX_DESC_RTS_SHORT(pdesc,
+				      ((tcb_desc.rts_rate <= DESC92C_RATE54M) ?
+				      (tcb_desc.b_rts_use_shortpreamble ? 1 : 0)
+				      : (tcb_desc.b_rts_use_shortgi ? 1 : 0)));
+
+		if (mac->bw_40) {
+			if (tcb_desc.b_packet_bw) {
+				SET_TX_DESC_DATA_BW(pdesc, 1);
+				SET_TX_DESC_TX_SUB_CARRIER(pdesc, 3);
+			} else {
+				SET_TX_DESC_DATA_BW(pdesc, 0);
+
+				if (rate_flag & IEEE80211_TX_RC_DUP_DATA) {
+					SET_TX_DESC_TX_SUB_CARRIER(pdesc,
+							mac->cur_40_prime_sc);
+				}
+			}
+		} else {
+			SET_TX_DESC_DATA_BW(pdesc, 0);
+			SET_TX_DESC_TX_SUB_CARRIER(pdesc, 0);
+		}
+
+		SET_TX_DESC_LINIP(pdesc, 0);
+		SET_TX_DESC_PKT_SIZE(pdesc, (u16) skb->len);
+
+		if (sta) {
+			u8 ampdu_density = sta->ht_cap.ampdu_density;
+			SET_TX_DESC_AMPDU_DENSITY(pdesc, ampdu_density);
+		}
+
+		if (info->control.hw_key) {
+			struct ieee80211_key_conf *keyconf =
+			    info->control.hw_key;
+
+			switch (keyconf->cipher) {
+			case WLAN_CIPHER_SUITE_WEP40:
+			case WLAN_CIPHER_SUITE_WEP104:
+			case WLAN_CIPHER_SUITE_TKIP:
+				SET_TX_DESC_SEC_TYPE(pdesc, 0x1);
+				break;
+			case WLAN_CIPHER_SUITE_CCMP:
+				SET_TX_DESC_SEC_TYPE(pdesc, 0x3);
+				break;
+			default:
+				SET_TX_DESC_SEC_TYPE(pdesc, 0x0);
+				break;
+
+			}
+		}
+
+		SET_TX_DESC_PKT_ID(pdesc, 0);
+		SET_TX_DESC_QUEUE_SEL(pdesc, fw_qsel);
+
+		SET_TX_DESC_DATA_RATE_FB_LIMIT(pdesc, 0x1F);
+		SET_TX_DESC_RTS_RATE_FB_LIMIT(pdesc, 0xF);
+		SET_TX_DESC_DISABLE_FB(pdesc, 0);
+		SET_TX_DESC_USE_RATE(pdesc, tcb_desc.use_driver_rate ? 1 : 0);
+
+		if (ieee80211_is_data_qos(fc)) {
+			if (mac->rdg_en) {
+				RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE,
+					 ("Enable RDG function.\n"));
+				SET_TX_DESC_RDG_ENABLE(pdesc, 1);
+				SET_TX_DESC_HTC(pdesc, 1);
+			}
+		}
+	}
+
+	SET_TX_DESC_FIRST_SEG(pdesc, (b_firstseg ? 1 : 0));
+	SET_TX_DESC_LAST_SEG(pdesc, (b_lastseg ? 1 : 0));
+
+	SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16) skb->len);
+
+	SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping));
+
+	if (rtlpriv->dm.b_useramask) {
+		SET_TX_DESC_RATE_ID(pdesc, tcb_desc.ratr_index);
+		SET_TX_DESC_MACID(pdesc, tcb_desc.mac_id);
+	} else {
+		SET_TX_DESC_RATE_ID(pdesc, 0xC + tcb_desc.ratr_index);
+		SET_TX_DESC_MACID(pdesc, tcb_desc.ratr_index);
+	}
+
+	if ((!ieee80211_is_data_qos(fc)) && ppsc->b_leisure_ps &&
+	    ppsc->b_fwctrl_lps) {
+		SET_TX_DESC_HWSEQ_EN(pdesc, 1);
+		SET_TX_DESC_PKT_ID(pdesc, 8);
+
+		if (!b_defaultadapter)
+			SET_TX_DESC_QOS(pdesc, 1);
+	}
+
+	SET_TX_DESC_MORE_FRAG(pdesc, (b_lastseg ? 0 : 1));
+
+	if (is_multicast_ether_addr(ieee80211_get_DA(hdr)) ||
+	    is_broadcast_ether_addr(ieee80211_get_DA(hdr))) {
+		SET_TX_DESC_BMC(pdesc, 1);
+	}
+
+	RT_TRACE(rtlpriv, COMP_SEND, DBG_TRACE, ("\n"));
+}
+
+void rtl92ce_tx_fill_cmddesc(struct ieee80211_hw *hw,
+			     u8 *pdesc, bool b_firstseg,
+			     bool b_lastseg, struct sk_buff *skb)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+	u8 fw_queue = QSLT_BEACON;
+
+	dma_addr_t mapping = pci_map_single(rtlpci->pdev,
+					    skb->data, skb->len,
+					    PCI_DMA_TODEVICE);
+
+	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
+	u16 fc = le16_to_cpu(hdr->frame_control);
+
+	CLEAR_PCI_TX_DESC_CONTENT(pdesc, TX_DESC_SIZE);
+
+	if (b_firstseg)
+		SET_TX_DESC_OFFSET(pdesc, USB_HWDESC_HEADER_LEN);
+
+	SET_TX_DESC_TX_RATE(pdesc, DESC92C_RATE1M);
+
+	SET_TX_DESC_SEQ(pdesc, 0);
+
+	SET_TX_DESC_LINIP(pdesc, 0);
+
+	SET_TX_DESC_QUEUE_SEL(pdesc, fw_queue);
+
+	SET_TX_DESC_FIRST_SEG(pdesc, 1);
+	SET_TX_DESC_LAST_SEG(pdesc, 1);
+
+	SET_TX_DESC_TX_BUFFER_SIZE(pdesc, (u16) (skb->len));
+
+	SET_TX_DESC_TX_BUFFER_ADDRESS(pdesc, cpu_to_le32(mapping));
+
+	SET_TX_DESC_RATE_ID(pdesc, 7);
+	SET_TX_DESC_MACID(pdesc, 0);
+
+	SET_TX_DESC_OWN(pdesc, 1);
+
+	SET_TX_DESC_PKT_SIZE((u8 *) pdesc, (u16) (skb->len));
+
+	SET_TX_DESC_FIRST_SEG(pdesc, 1);
+	SET_TX_DESC_LAST_SEG(pdesc, 1);
+
+	SET_TX_DESC_OFFSET(pdesc, 0x20);
+
+	SET_TX_DESC_USE_RATE(pdesc, 1);
+
+	if (!ieee80211_is_data_qos(fc)) {
+		SET_TX_DESC_HWSEQ_EN(pdesc, 1);
+		SET_TX_DESC_PKT_ID(pdesc, 8);
+	}
+
+	RT_PRINT_DATA(rtlpriv, COMP_CMD, DBG_LOUD,
+		      "H2C Tx Cmd Content\n",
+		      pdesc, TX_DESC_SIZE);
+}
+
+void rtl92ce_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val)
+{
+	if (istx == true) {
+		switch (desc_name) {
+		case HW_DESC_OWN:
+			SET_TX_DESC_OWN(pdesc, 1);
+			break;
+		case HW_DESC_TX_NEXTDESC_ADDR:
+			SET_TX_DESC_NEXT_DESC_ADDRESS(pdesc, *(u32 *) val);
+			break;
+		default:
+			RT_ASSERT(false, ("ERR txdesc :%d"
+					  " not process\n", desc_name));
+			break;
+		}
+	} else {
+		switch (desc_name) {
+		case HW_DESC_RXOWN:
+			SET_RX_DESC_OWN(pdesc, 1);
+			break;
+		case HW_DESC_RXBUFF_ADDR:
+			SET_RX_DESC_BUFF_ADDR(pdesc, *(u32 *) val);
+			break;
+		case HW_DESC_RXPKT_LEN:
+			SET_RX_DESC_PKT_LEN(pdesc, *(u32 *) val);
+			break;
+		case HW_DESC_RXERO:
+			SET_RX_DESC_EOR(pdesc, 1);
+			break;
+		default:
+			RT_ASSERT(false, ("ERR rxdesc :%d "
+					  "not process\n", desc_name));
+			break;
+		}
+	}
+}
+
+u32 rtl92ce_get_desc(u8 *p_desc, bool istx, u8 desc_name)
+{
+	u32 ret = 0;
+
+	if (istx == true) {
+		switch (desc_name) {
+		case HW_DESC_OWN:
+			ret = GET_TX_DESC_OWN(p_desc);
+			break;
+		case HW_DESC_TXBUFF_ADDR:
+			ret = GET_TX_DESC_TX_BUFFER_ADDRESS(p_desc);
+			break;
+		default:
+			RT_ASSERT(false, ("ERR txdesc :%d "
+					  "not process\n", desc_name));
+			break;
+		}
+	} else {
+		struct rx_desc_92c *pdesc = (struct rx_desc_92c *)p_desc;
+		switch (desc_name) {
+		case HW_DESC_OWN:
+			ret = GET_RX_DESC_OWN(pdesc);
+			break;
+		case HW_DESC_RXPKT_LEN:
+			ret = GET_RX_DESC_PKT_LEN(pdesc);
+			break;
+		default:
+			RT_ASSERT(false, ("ERR rxdesc :%d "
+					  "not process\n", desc_name));
+			break;
+		}
+	}
+	return ret;
+}
+
+void rtl92ce_tx_polling(struct ieee80211_hw *hw, unsigned int hw_queue)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	if (hw_queue == BEACON_QUEUE) {
+		rtl_write_word(rtlpriv, REG_PCIE_CTRL_REG, BIT(4));
+	} else {
+		rtl_write_word(rtlpriv, REG_PCIE_CTRL_REG,
+			       BIT(0) << (hw_queue));
+	}
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
new file mode 100644
index 00000000000..53d0e0a5af5
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h
@@ -0,0 +1,714 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92CE_TRX_H__
+#define __RTL92CE_TRX_H__
+
+#define TX_DESC_SIZE				64
+#define TX_DESC_AGGR_SUBFRAME_SIZE		32
+
+#define RX_DESC_SIZE				32
+#define RX_DRV_INFO_SIZE_UNIT			8
+
+#define	TX_DESC_NEXT_DESC_OFFSET		40
+#define USB_HWDESC_HEADER_LEN			32
+#define CRCLENGTH				4
+
+#define SET_TX_DESC_PKT_SIZE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 0, 16, __val)
+#define SET_TX_DESC_OFFSET(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 16, 8, __val)
+#define SET_TX_DESC_BMC(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 24, 1, __val)
+#define SET_TX_DESC_HTC(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 25, 1, __val)
+#define SET_TX_DESC_LAST_SEG(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 26, 1, __val)
+#define SET_TX_DESC_FIRST_SEG(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 27, 1, __val)
+#define SET_TX_DESC_LINIP(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 28, 1, __val)
+#define SET_TX_DESC_NO_ACM(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 29, 1, __val)
+#define SET_TX_DESC_GF(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 30, 1, __val)
+#define SET_TX_DESC_OWN(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 31, 1, __val)
+
+#define GET_TX_DESC_PKT_SIZE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 0, 16)
+#define GET_TX_DESC_OFFSET(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 16, 8)
+#define GET_TX_DESC_BMC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 24, 1)
+#define GET_TX_DESC_HTC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 25, 1)
+#define GET_TX_DESC_LAST_SEG(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 26, 1)
+#define GET_TX_DESC_FIRST_SEG(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 27, 1)
+#define GET_TX_DESC_LINIP(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 28, 1)
+#define GET_TX_DESC_NO_ACM(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 29, 1)
+#define GET_TX_DESC_GF(__pdesc)				\
+	LE_BITS_TO_4BYTE(__pdesc, 30, 1)
+#define GET_TX_DESC_OWN(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 31, 1)
+
+#define SET_TX_DESC_MACID(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 0, 5, __val)
+#define SET_TX_DESC_AGG_BREAK(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 5, 1, __val)
+#define SET_TX_DESC_BK(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 6, 1, __val)
+#define SET_TX_DESC_RDG_ENABLE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 7, 1, __val)
+#define SET_TX_DESC_QUEUE_SEL(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 8, 5, __val)
+#define SET_TX_DESC_RDG_NAV_EXT(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 13, 1, __val)
+#define SET_TX_DESC_LSIG_TXOP_EN(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 14, 1, __val)
+#define SET_TX_DESC_PIFS(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 15, 1, __val)
+#define SET_TX_DESC_RATE_ID(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 16, 4, __val)
+#define SET_TX_DESC_NAV_USE_HDR(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 20, 1, __val)
+#define SET_TX_DESC_EN_DESC_ID(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 21, 1, __val)
+#define SET_TX_DESC_SEC_TYPE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 22, 2, __val)
+#define SET_TX_DESC_PKT_OFFSET(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+4, 24, 8, __val)
+
+#define GET_TX_DESC_MACID(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 0, 5)
+#define GET_TX_DESC_AGG_ENABLE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 5, 1)
+#define GET_TX_DESC_AGG_BREAK(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 6, 1)
+#define GET_TX_DESC_RDG_ENABLE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 7, 1)
+#define GET_TX_DESC_QUEUE_SEL(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 8, 5)
+#define GET_TX_DESC_RDG_NAV_EXT(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+4, 13, 1)
+#define GET_TX_DESC_LSIG_TXOP_EN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+4, 14, 1)
+#define GET_TX_DESC_PIFS(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 15, 1)
+#define GET_TX_DESC_RATE_ID(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 16, 4)
+#define GET_TX_DESC_NAV_USE_HDR(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+4, 20, 1)
+#define GET_TX_DESC_EN_DESC_ID(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 21, 1)
+#define GET_TX_DESC_SEC_TYPE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 22, 2)
+#define GET_TX_DESC_PKT_OFFSET(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 24, 8)
+
+#define SET_TX_DESC_RTS_RC(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 0, 6, __val)
+#define SET_TX_DESC_DATA_RC(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 6, 6, __val)
+#define SET_TX_DESC_BAR_RTY_TH(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 14, 2, __val)
+#define SET_TX_DESC_MORE_FRAG(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 17, 1, __val)
+#define SET_TX_DESC_RAW(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 18, 1, __val)
+#define SET_TX_DESC_CCX(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 19, 1, __val)
+#define SET_TX_DESC_AMPDU_DENSITY(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 20, 3, __val)
+#define SET_TX_DESC_ANTSEL_A(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 24, 1, __val)
+#define SET_TX_DESC_ANTSEL_B(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 25, 1, __val)
+#define SET_TX_DESC_TX_ANT_CCK(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 26, 2, __val)
+#define SET_TX_DESC_TX_ANTL(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 28, 2, __val)
+#define SET_TX_DESC_TX_ANT_HT(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+8, 30, 2, __val)
+
+#define GET_TX_DESC_RTS_RC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 0, 6)
+#define GET_TX_DESC_DATA_RC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 6, 6)
+#define GET_TX_DESC_BAR_RTY_TH(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 14, 2)
+#define GET_TX_DESC_MORE_FRAG(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 17, 1)
+#define GET_TX_DESC_RAW(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 18, 1)
+#define GET_TX_DESC_CCX(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 19, 1)
+#define GET_TX_DESC_AMPDU_DENSITY(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+8, 20, 3)
+#define GET_TX_DESC_ANTSEL_A(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 24, 1)
+#define GET_TX_DESC_ANTSEL_B(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 25, 1)
+#define GET_TX_DESC_TX_ANT_CCK(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 26, 2)
+#define GET_TX_DESC_TX_ANTL(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 28, 2)
+#define GET_TX_DESC_TX_ANT_HT(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 30, 2)
+
+#define SET_TX_DESC_NEXT_HEAP_PAGE(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 0, 8, __val)
+#define SET_TX_DESC_TAIL_PAGE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 8, 8, __val)
+#define SET_TX_DESC_SEQ(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 16, 12, __val)
+#define SET_TX_DESC_PKT_ID(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+12, 28, 4, __val)
+
+#define GET_TX_DESC_NEXT_HEAP_PAGE(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+12, 0, 8)
+#define GET_TX_DESC_TAIL_PAGE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 8, 8)
+#define GET_TX_DESC_SEQ(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 16, 12)
+#define GET_TX_DESC_PKT_ID(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 28, 4)
+
+#define SET_TX_DESC_RTS_RATE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 0, 5, __val)
+#define SET_TX_DESC_AP_DCFE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 5, 1, __val)
+#define SET_TX_DESC_QOS(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 6, 1, __val)
+#define SET_TX_DESC_HWSEQ_EN(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 7, 1, __val)
+#define SET_TX_DESC_USE_RATE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 8, 1, __val)
+#define SET_TX_DESC_DISABLE_RTS_FB(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 9, 1, __val)
+#define SET_TX_DESC_DISABLE_FB(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 10, 1, __val)
+#define SET_TX_DESC_CTS2SELF(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 11, 1, __val)
+#define SET_TX_DESC_RTS_ENABLE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 12, 1, __val)
+#define SET_TX_DESC_HW_RTS_ENABLE(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 13, 1, __val)
+#define SET_TX_DESC_PORT_ID(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 14, 1, __val)
+#define SET_TX_DESC_WAIT_DCTS(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 18, 1, __val)
+#define SET_TX_DESC_CTS2AP_EN(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 19, 1, __val)
+#define SET_TX_DESC_TX_SUB_CARRIER(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 20, 2, __val)
+#define SET_TX_DESC_TX_STBC(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 22, 2, __val)
+#define SET_TX_DESC_DATA_SHORT(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 24, 1, __val)
+#define SET_TX_DESC_DATA_BW(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 25, 1, __val)
+#define SET_TX_DESC_RTS_SHORT(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 26, 1, __val)
+#define SET_TX_DESC_RTS_BW(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 27, 1, __val)
+#define SET_TX_DESC_RTS_SC(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 28, 2, __val)
+#define SET_TX_DESC_RTS_STBC(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+16, 30, 2, __val)
+
+#define GET_TX_DESC_RTS_RATE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 0, 5)
+#define GET_TX_DESC_AP_DCFE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 5, 1)
+#define GET_TX_DESC_QOS(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 6, 1)
+#define GET_TX_DESC_HWSEQ_EN(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 7, 1)
+#define GET_TX_DESC_USE_RATE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 8, 1)
+#define GET_TX_DESC_DISABLE_RTS_FB(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+16, 9, 1)
+#define GET_TX_DESC_DISABLE_FB(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 10, 1)
+#define GET_TX_DESC_CTS2SELF(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 11, 1)
+#define GET_TX_DESC_RTS_ENABLE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 12, 1)
+#define GET_TX_DESC_HW_RTS_ENABLE(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+16, 13, 1)
+#define GET_TX_DESC_PORT_ID(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 14, 1)
+#define GET_TX_DESC_WAIT_DCTS(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 18, 1)
+#define GET_TX_DESC_CTS2AP_EN(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 19, 1)
+#define GET_TX_DESC_TX_SUB_CARRIER(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+16, 20, 2)
+#define GET_TX_DESC_TX_STBC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 22, 2)
+#define GET_TX_DESC_DATA_SHORT(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 24, 1)
+#define GET_TX_DESC_DATA_BW(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 25, 1)
+#define GET_TX_DESC_RTS_SHORT(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 26, 1)
+#define GET_TX_DESC_RTS_BW(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 27, 1)
+#define GET_TX_DESC_RTS_SC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 28, 2)
+#define GET_TX_DESC_RTS_STBC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 30, 2)
+
+#define SET_TX_DESC_TX_RATE(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 0, 6, __val)
+#define SET_TX_DESC_DATA_SHORTGI(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 6, 1, __val)
+#define SET_TX_DESC_CCX_TAG(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 7, 1, __val)
+#define SET_TX_DESC_DATA_RATE_FB_LIMIT(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 8, 5, __val)
+#define SET_TX_DESC_RTS_RATE_FB_LIMIT(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 13, 4, __val)
+#define SET_TX_DESC_RETRY_LIMIT_ENABLE(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 17, 1, __val)
+#define SET_TX_DESC_DATA_RETRY_LIMIT(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 18, 6, __val)
+#define SET_TX_DESC_USB_TXAGG_NUM(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+20, 24, 8, __val)
+
+#define GET_TX_DESC_TX_RATE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+20, 0, 6)
+#define GET_TX_DESC_DATA_SHORTGI(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+20, 6, 1)
+#define GET_TX_DESC_CCX_TAG(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+20, 7, 1)
+#define GET_TX_DESC_DATA_RATE_FB_LIMIT(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+20, 8, 5)
+#define GET_TX_DESC_RTS_RATE_FB_LIMIT(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+20, 13, 4)
+#define GET_TX_DESC_RETRY_LIMIT_ENABLE(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+20, 17, 1)
+#define GET_TX_DESC_DATA_RETRY_LIMIT(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+20, 18, 6)
+#define GET_TX_DESC_USB_TXAGG_NUM(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+20, 24, 8)
+
+#define SET_TX_DESC_TXAGC_A(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+24, 0, 5, __val)
+#define SET_TX_DESC_TXAGC_B(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+24, 5, 5, __val)
+#define SET_TX_DESC_USE_MAX_LEN(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+24, 10, 1, __val)
+#define SET_TX_DESC_MAX_AGG_NUM(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+24, 11, 5, __val)
+#define SET_TX_DESC_MCSG1_MAX_LEN(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+24, 16, 4, __val)
+#define SET_TX_DESC_MCSG2_MAX_LEN(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+24, 20, 4, __val)
+#define SET_TX_DESC_MCSG3_MAX_LEN(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+24, 24, 4, __val)
+#define SET_TX_DESC_MCS7_SGI_MAX_LEN(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+24, 28, 4, __val)
+
+#define GET_TX_DESC_TXAGC_A(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+24, 0, 5)
+#define GET_TX_DESC_TXAGC_B(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+24, 5, 5)
+#define GET_TX_DESC_USE_MAX_LEN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+24, 10, 1)
+#define GET_TX_DESC_MAX_AGG_NUM(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+24, 11, 5)
+#define GET_TX_DESC_MCSG1_MAX_LEN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+24, 16, 4)
+#define GET_TX_DESC_MCSG2_MAX_LEN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+24, 20, 4)
+#define GET_TX_DESC_MCSG3_MAX_LEN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+24, 24, 4)
+#define GET_TX_DESC_MCS7_SGI_MAX_LEN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+24, 28, 4)
+
+#define SET_TX_DESC_TX_BUFFER_SIZE(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+28, 0, 16, __val)
+#define SET_TX_DESC_MCSG4_MAX_LEN(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+28, 16, 4, __val)
+#define SET_TX_DESC_MCSG5_MAX_LEN(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+28, 20, 4, __val)
+#define SET_TX_DESC_MCSG6_MAX_LEN(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+28, 24, 4, __val)
+#define SET_TX_DESC_MCS15_SGI_MAX_LEN(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+28, 28, 4, __val)
+
+#define GET_TX_DESC_TX_BUFFER_SIZE(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+28, 0, 16)
+#define GET_TX_DESC_MCSG4_MAX_LEN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+28, 16, 4)
+#define GET_TX_DESC_MCSG5_MAX_LEN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+28, 20, 4)
+#define GET_TX_DESC_MCSG6_MAX_LEN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+28, 24, 4)
+#define GET_TX_DESC_MCS15_SGI_MAX_LEN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+28, 28, 4)
+
+#define SET_TX_DESC_TX_BUFFER_ADDRESS(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+32, 0, 32, __val)
+#define SET_TX_DESC_TX_BUFFER_ADDRESS64(__pdesc, __val) \
+	SET_BITS_TO_LE_4BYTE(__pdesc+36, 0, 32, __val)
+
+#define GET_TX_DESC_TX_BUFFER_ADDRESS(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+32, 0, 32)
+#define GET_TX_DESC_TX_BUFFER_ADDRESS64(__pdesc)	\
+	LE_BITS_TO_4BYTE(__pdesc+36, 0, 32)
+
+#define SET_TX_DESC_NEXT_DESC_ADDRESS(__pdesc, __val)	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+40, 0, 32, __val)
+#define SET_TX_DESC_NEXT_DESC_ADDRESS64(__pdesc, __val) \
+	SET_BITS_TO_LE_4BYTE(__pdesc+44, 0, 32, __val)
+
+#define GET_TX_DESC_NEXT_DESC_ADDRESS(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+40, 0, 32)
+#define GET_TX_DESC_NEXT_DESC_ADDRESS64(__pdesc)	\
+	LE_BITS_TO_4BYTE(__pdesc+44, 0, 32)
+
+#define GET_RX_DESC_PKT_LEN(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 0, 14)
+#define GET_RX_DESC_CRC32(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 14, 1)
+#define GET_RX_DESC_ICV(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 15, 1)
+#define GET_RX_DESC_DRV_INFO_SIZE(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc, 16, 4)
+#define GET_RX_DESC_SECURITY(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 20, 3)
+#define GET_RX_DESC_QOS(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 23, 1)
+#define GET_RX_DESC_SHIFT(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 24, 2)
+#define GET_RX_DESC_PHYST(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 26, 1)
+#define GET_RX_DESC_SWDEC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 27, 1)
+#define GET_RX_DESC_LS(__pdesc)				\
+	LE_BITS_TO_4BYTE(__pdesc, 28, 1)
+#define GET_RX_DESC_FS(__pdesc)				\
+	LE_BITS_TO_4BYTE(__pdesc, 29, 1)
+#define GET_RX_DESC_EOR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 30, 1)
+#define GET_RX_DESC_OWN(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc, 31, 1)
+
+#define SET_RX_DESC_PKT_LEN(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 0, 14, __val)
+#define SET_RX_DESC_EOR(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 30, 1, __val)
+#define SET_RX_DESC_OWN(__pdesc, __val)			\
+	SET_BITS_TO_LE_4BYTE(__pdesc, 31, 1, __val)
+
+#define GET_RX_DESC_MACID(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 0, 5)
+#define GET_RX_DESC_TID(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 5, 4)
+#define GET_RX_DESC_HWRSVD(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 9, 5)
+#define GET_RX_DESC_PAGGR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 14, 1)
+#define GET_RX_DESC_FAGGR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 15, 1)
+#define GET_RX_DESC_A1_FIT(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 16, 4)
+#define GET_RX_DESC_A2_FIT(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 20, 4)
+#define GET_RX_DESC_PAM(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 24, 1)
+#define GET_RX_DESC_PWR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 25, 1)
+#define GET_RX_DESC_MD(__pdesc)				\
+	LE_BITS_TO_4BYTE(__pdesc+4, 26, 1)
+#define GET_RX_DESC_MF(__pdesc)				\
+	LE_BITS_TO_4BYTE(__pdesc+4, 27, 1)
+#define GET_RX_DESC_TYPE(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+4, 28, 2)
+#define GET_RX_DESC_MC(__pdesc)				\
+	LE_BITS_TO_4BYTE(__pdesc+4, 30, 1)
+#define GET_RX_DESC_BC(__pdesc)				\
+	LE_BITS_TO_4BYTE(__pdesc+4, 31, 1)
+#define GET_RX_DESC_SEQ(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 0, 12)
+#define GET_RX_DESC_FRAG(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 12, 4)
+#define GET_RX_DESC_NEXT_PKT_LEN(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+8, 16, 14)
+#define GET_RX_DESC_NEXT_IND(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 30, 1)
+#define GET_RX_DESC_RSVD(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+8, 31, 1)
+
+#define GET_RX_DESC_RXMCS(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 0, 6)
+#define GET_RX_DESC_RXHT(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 6, 1)
+#define GET_RX_DESC_SPLCP(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 8, 1)
+#define GET_RX_DESC_BW(__pdesc)				\
+	LE_BITS_TO_4BYTE(__pdesc+12, 9, 1)
+#define GET_RX_DESC_HTC(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 10, 1)
+#define GET_RX_DESC_HWPC_ERR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 14, 1)
+#define GET_RX_DESC_HWPC_IND(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 15, 1)
+#define GET_RX_DESC_IV0(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+12, 16, 16)
+
+#define GET_RX_DESC_IV1(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+16, 0, 32)
+#define GET_RX_DESC_TSFL(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+20, 0, 32)
+
+#define GET_RX_DESC_BUFF_ADDR(__pdesc)			\
+	LE_BITS_TO_4BYTE(__pdesc+24, 0, 32)
+#define GET_RX_DESC_BUFF_ADDR64(__pdesc)		\
+	LE_BITS_TO_4BYTE(__pdesc+28, 0, 32)
+
+#define SET_RX_DESC_BUFF_ADDR(__pdesc, __val)		\
+	SET_BITS_TO_LE_4BYTE(__pdesc+24, 0, 32, __val)
+#define SET_RX_DESC_BUFF_ADDR64(__pdesc, __val) 	\
+	SET_BITS_TO_LE_4BYTE(__pdesc+28, 0, 32, __val)
+
+#define CLEAR_PCI_TX_DESC_CONTENT(__pdesc, _size)	\
+do {							\
+	if (_size > TX_DESC_NEXT_DESC_OFFSET)		\
+		memset((void *)__pdesc, 0, TX_DESC_NEXT_DESC_OFFSET);	\
+	else						\
+		memset((void *)__pdesc, 0, _size);	\
+} while (0);
+
+#define RX_HAL_IS_CCK_RATE(_pdesc)\
+	(_pdesc->rxmcs == DESC92C_RATE1M ||		\
+	 _pdesc->rxmcs == DESC92C_RATE2M ||		\
+	 _pdesc->rxmcs == DESC92C_RATE5_5M ||		\
+	 _pdesc->rxmcs == DESC92C_RATE11M)
+
+struct rx_fwinfo_92c {
+	u8 gain_trsw[4];
+	u8 pwdb_all;
+	u8 cfosho[4];
+	u8 cfotail[4];
+	char rxevm[2];
+	char rxsnr[4];
+	u8 pdsnr[2];
+	u8 csi_current[2];
+	u8 csi_target[2];
+	u8 sigevm;
+	u8 max_ex_pwr;
+	u8 ex_intf_flag:1;
+	u8 sgi_en:1;
+	u8 rxsc:2;
+	u8 reserve:4;
+} __packed;
+
+struct tx_desc_92c {
+	u32 pktsize:16;
+	u32 offset:8;
+	u32 bmc:1;
+	u32 htc:1;
+	u32 lastseg:1;
+	u32 firstseg:1;
+	u32 linip:1;
+	u32 noacm:1;
+	u32 gf:1;
+	u32 own:1;
+
+	u32 macid:5;
+	u32 agg_en:1;
+	u32 bk:1;
+	u32 rdg_en:1;
+	u32 queuesel:5;
+	u32 rd_nav_ext:1;
+	u32 lsig_txop_en:1;
+	u32 pifs:1;
+	u32 rateid:4;
+	u32 nav_usehdr:1;
+	u32 en_descid:1;
+	u32 sectype:2;
+	u32 pktoffset:8;
+
+	u32 rts_rc:6;
+	u32 data_rc:6;
+	u32 rsvd0:2;
+	u32 bar_retryht:2;
+	u32 rsvd1:1;
+	u32 morefrag:1;
+	u32 raw:1;
+	u32 ccx:1;
+	u32 ampdudensity:3;
+	u32 rsvd2:1;
+	u32 ant_sela:1;
+	u32 ant_selb:1;
+	u32 txant_cck:2;
+	u32 txant_l:2;
+	u32 txant_ht:2;
+
+	u32 nextheadpage:8;
+	u32 tailpage:8;
+	u32 seq:12;
+	u32 pktid:4;
+
+	u32 rtsrate:5;
+	u32 apdcfe:1;
+	u32 qos:1;
+	u32 hwseq_enable:1;
+	u32 userrate:1;
+	u32 dis_rtsfb:1;
+	u32 dis_datafb:1;
+	u32 cts2self:1;
+	u32 rts_en:1;
+	u32 hwrts_en:1;
+	u32 portid:1;
+	u32 rsvd3:3;
+	u32 waitdcts:1;
+	u32 cts2ap_en:1;
+	u32 txsc:2;
+	u32 stbc:2;
+	u32 txshort:1;
+	u32 txbw:1;
+	u32 rtsshort:1;
+	u32 rtsbw:1;
+	u32 rtssc:2;
+	u32 rtsstbc:2;
+
+	u32 txrate:6;
+	u32 shortgi:1;
+	u32 ccxt:1;
+	u32 txrate_fb_lmt:5;
+	u32 rtsrate_fb_lmt:4;
+	u32 retrylmt_en:1;
+	u32 txretrylmt:6;
+	u32 usb_txaggnum:8;
+
+	u32 txagca:5;
+	u32 txagcb:5;
+	u32 usemaxlen:1;
+	u32 maxaggnum:5;
+	u32 mcsg1maxlen:4;
+	u32 mcsg2maxlen:4;
+	u32 mcsg3maxlen:4;
+	u32 mcs7sgimaxlen:4;
+
+	u32 txbuffersize:16;
+	u32 mcsg4maxlen:4;
+	u32 mcsg5maxlen:4;
+	u32 mcsg6maxlen:4;
+	u32 mcsg15sgimaxlen:4;
+
+	u32 txbuffaddr;
+	u32 txbufferaddr64;
+	u32 nextdescaddress;
+	u32 nextdescaddress64;
+
+	u32 reserve_pass_pcie_mm_limit[4];
+} __packed;
+
+struct rx_desc_92c {
+	u32 length:14;
+	u32 crc32:1;
+	u32 icverror:1;
+	u32 drv_infosize:4;
+	u32 security:3;
+	u32 qos:1;
+	u32 shift:2;
+	u32 phystatus:1;
+	u32 swdec:1;
+	u32 lastseg:1;
+	u32 firstseg:1;
+	u32 eor:1;
+	u32 own:1;
+
+	u32 macid:5;
+	u32 tid:4;
+	u32 hwrsvd:5;
+	u32 paggr:1;
+	u32 faggr:1;
+	u32 a1_fit:4;
+	u32 a2_fit:4;
+	u32 pam:1;
+	u32 pwr:1;
+	u32 moredata:1;
+	u32 morefrag:1;
+	u32 type:2;
+	u32 mc:1;
+	u32 bc:1;
+
+	u32 seq:12;
+	u32 frag:4;
+	u32 nextpktlen:14;
+	u32 nextind:1;
+	u32 rsvd:1;
+
+	u32 rxmcs:6;
+	u32 rxht:1;
+	u32 amsdu:1;
+	u32 splcp:1;
+	u32 bandwidth:1;
+	u32 htc:1;
+	u32 tcpchk_rpt:1;
+	u32 ipcchk_rpt:1;
+	u32 tcpchk_valid:1;
+	u32 hwpcerr:1;
+	u32 hwpcind:1;
+	u32 iv0:16;
+
+	u32 iv1;
+
+	u32 tsfl;
+
+	u32 bufferaddress;
+	u32 bufferaddress64;
+
+} __packed;
+
+void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw,
+			  struct ieee80211_hdr *hdr,
+			  u8 *pdesc, struct ieee80211_tx_info *info,
+			  struct sk_buff *skb, unsigned int qsel);
+bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw,
+			   struct rtl_stats *stats,
+			   struct ieee80211_rx_status *rx_status,
+			   u8 *pdesc, struct sk_buff *skb);
+void rtl92ce_set_desc(u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+u32 rtl92ce_get_desc(u8 *pdesc, bool istx, u8 desc_name);
+void rtl92ce_tx_polling(struct ieee80211_hw *hw, unsigned int hw_queue);
+void rtl92ce_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc,
+			     bool b_firstseg, bool b_lastseg,
+			     struct sk_buff *skb);
+#endif
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
new file mode 100644
index 00000000000..d44d79613d2
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -0,0 +1,1532 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL_WIFI_H__
+#define __RTL_WIFI_H__
+
+#include <linux/sched.h>
+#include <linux/firmware.h>
+#include <linux/version.h>
+#include <linux/etherdevice.h>
+#include <net/mac80211.h>
+#include "debug.h"
+
+#define RF_CHANGE_BY_INIT			0
+#define RF_CHANGE_BY_IPS			BIT(28)
+#define RF_CHANGE_BY_PS				BIT(29)
+#define RF_CHANGE_BY_HW				BIT(30)
+#define RF_CHANGE_BY_SW				BIT(31)
+
+#define IQK_ADDA_REG_NUM			16
+#define IQK_MAC_REG_NUM				4
+
+#define MAX_KEY_LEN				61
+#define KEY_BUF_SIZE				5
+
+/* QoS related. */
+/*aci: 0x00	Best Effort*/
+/*aci: 0x01	Background*/
+/*aci: 0x10	Video*/
+/*aci: 0x11	Voice*/
+/*Max: define total number.*/
+#define AC0_BE					0
+#define AC1_BK					1
+#define AC2_VI					2
+#define AC3_VO					3
+#define AC_MAX					4
+#define QOS_QUEUE_NUM				4
+#define RTL_MAC80211_NUM_QUEUE			5
+
+#define QBSS_LOAD_SIZE				5
+#define MAX_WMMELE_LENGTH			64
+
+/*slot time for 11g. */
+#define RTL_SLOT_TIME_9				9
+#define RTL_SLOT_TIME_20			20
+
+/*related with tcp/ip. */
+/*if_ehther.h*/
+#define ETH_P_PAE		0x888E	/*Port Access Entity (IEEE 802.1X) */
+#define ETH_P_IP		0x0800	/*Internet Protocol packet */
+#define ETH_P_ARP		0x0806	/*Address Resolution packet */
+#define SNAP_SIZE		6
+#define PROTOC_TYPE_SIZE	2
+
+/*related with 802.11 frame*/
+#define MAC80211_3ADDR_LEN			24
+#define MAC80211_4ADDR_LEN			30
+
+enum intf_type {
+	INTF_PCI = 0,
+	INTF_USB = 1,
+};
+
+enum radio_path {
+	RF90_PATH_A = 0,
+	RF90_PATH_B = 1,
+	RF90_PATH_C = 2,
+	RF90_PATH_D = 3,
+};
+
+enum rt_eeprom_type {
+	EEPROM_93C46,
+	EEPROM_93C56,
+	EEPROM_BOOT_EFUSE,
+};
+
+enum rtl_status {
+	RTL_STATUS_INTERFACE_START = 0,
+};
+
+enum hardware_type {
+	HARDWARE_TYPE_RTL8192E,
+	HARDWARE_TYPE_RTL8192U,
+	HARDWARE_TYPE_RTL8192SE,
+	HARDWARE_TYPE_RTL8192SU,
+	HARDWARE_TYPE_RTL8192CE,
+	HARDWARE_TYPE_RTL8192CU,
+	HARDWARE_TYPE_RTL8192DE,
+	HARDWARE_TYPE_RTL8192DU,
+
+	/*keep it last*/
+	HARDWARE_TYPE_NUM
+};
+
+enum scan_operation_backup_opt {
+	SCAN_OPT_BACKUP = 0,
+	SCAN_OPT_RESTORE,
+	SCAN_OPT_MAX
+};
+
+/*RF state.*/
+enum rf_pwrstate {
+	ERFON,
+	ERFSLEEP,
+	ERFOFF
+};
+
+struct bb_reg_def {
+	u32 rfintfs;
+	u32 rfintfi;
+	u32 rfintfo;
+	u32 rfintfe;
+	u32 rf3wire_offset;
+	u32 rflssi_select;
+	u32 rftxgain_stage;
+	u32 rfhssi_para1;
+	u32 rfhssi_para2;
+	u32 rfswitch_control;
+	u32 rfagc_control1;
+	u32 rfagc_control2;
+	u32 rfrxiq_imbalance;
+	u32 rfrx_afe;
+	u32 rftxiq_imbalance;
+	u32 rftx_afe;
+	u32 rflssi_readback;
+	u32 rflssi_readbackpi;
+};
+
+enum io_type {
+	IO_CMD_PAUSE_DM_BY_SCAN = 0,
+	IO_CMD_RESUME_DM_BY_SCAN = 1,
+};
+
+enum hw_variables {
+	HW_VAR_ETHER_ADDR,
+	HW_VAR_MULTICAST_REG,
+	HW_VAR_BASIC_RATE,
+	HW_VAR_BSSID,
+	HW_VAR_MEDIA_STATUS,
+	HW_VAR_SECURITY_CONF,
+	HW_VAR_BEACON_INTERVAL,
+	HW_VAR_ATIM_WINDOW,
+	HW_VAR_LISTEN_INTERVAL,
+	HW_VAR_CS_COUNTER,
+	HW_VAR_DEFAULTKEY0,
+	HW_VAR_DEFAULTKEY1,
+	HW_VAR_DEFAULTKEY2,
+	HW_VAR_DEFAULTKEY3,
+	HW_VAR_SIFS,
+	HW_VAR_DIFS,
+	HW_VAR_EIFS,
+	HW_VAR_SLOT_TIME,
+	HW_VAR_ACK_PREAMBLE,
+	HW_VAR_CW_CONFIG,
+	HW_VAR_CW_VALUES,
+	HW_VAR_RATE_FALLBACK_CONTROL,
+	HW_VAR_CONTENTION_WINDOW,
+	HW_VAR_RETRY_COUNT,
+	HW_VAR_TR_SWITCH,
+	HW_VAR_COMMAND,
+	HW_VAR_WPA_CONFIG,
+	HW_VAR_AMPDU_MIN_SPACE,
+	HW_VAR_SHORTGI_DENSITY,
+	HW_VAR_AMPDU_FACTOR,
+	HW_VAR_MCS_RATE_AVAILABLE,
+	HW_VAR_AC_PARAM,
+	HW_VAR_ACM_CTRL,
+	HW_VAR_DIS_Req_Qsize,
+	HW_VAR_CCX_CHNL_LOAD,
+	HW_VAR_CCX_NOISE_HISTOGRAM,
+	HW_VAR_CCX_CLM_NHM,
+	HW_VAR_TxOPLimit,
+	HW_VAR_TURBO_MODE,
+	HW_VAR_RF_STATE,
+	HW_VAR_RF_OFF_BY_HW,
+	HW_VAR_BUS_SPEED,
+	HW_VAR_SET_DEV_POWER,
+
+	HW_VAR_RCR,
+	HW_VAR_RATR_0,
+	HW_VAR_RRSR,
+	HW_VAR_CPU_RST,
+	HW_VAR_CECHK_BSSID,
+	HW_VAR_LBK_MODE,
+	HW_VAR_AES_11N_FIX,
+	HW_VAR_USB_RX_AGGR,
+	HW_VAR_USER_CONTROL_TURBO_MODE,
+	HW_VAR_RETRY_LIMIT,
+	HW_VAR_INIT_TX_RATE,
+	HW_VAR_TX_RATE_REG,
+	HW_VAR_EFUSE_USAGE,
+	HW_VAR_EFUSE_BYTES,
+	HW_VAR_AUTOLOAD_STATUS,
+	HW_VAR_RF_2R_DISABLE,
+	HW_VAR_SET_RPWM,
+	HW_VAR_H2C_FW_PWRMODE,
+	HW_VAR_H2C_FW_JOINBSSRPT,
+	HW_VAR_FW_PSMODE_STATUS,
+	HW_VAR_1X1_RECV_COMBINE,
+	HW_VAR_STOP_SEND_BEACON,
+	HW_VAR_TSF_TIMER,
+	HW_VAR_IO_CMD,
+
+	HW_VAR_RF_RECOVERY,
+	HW_VAR_H2C_FW_UPDATE_GTK,
+	HW_VAR_WF_MASK,
+	HW_VAR_WF_CRC,
+	HW_VAR_WF_IS_MAC_ADDR,
+	HW_VAR_H2C_FW_OFFLOAD,
+	HW_VAR_RESET_WFCRC,
+
+	HW_VAR_HANDLE_FW_C2H,
+	HW_VAR_DL_FW_RSVD_PAGE,
+	HW_VAR_AID,
+	HW_VAR_HW_SEQ_ENABLE,
+	HW_VAR_CORRECT_TSF,
+	HW_VAR_BCN_VALID,
+	HW_VAR_FWLPS_RF_ON,
+	HW_VAR_DUAL_TSF_RST,
+	HW_VAR_SWITCH_EPHY_WoWLAN,
+	HW_VAR_INT_MIGRATION,
+	HW_VAR_INT_AC,
+	HW_VAR_RF_TIMING,
+
+	HW_VAR_MRC,
+
+	HW_VAR_MGT_FILTER,
+	HW_VAR_CTRL_FILTER,
+	HW_VAR_DATA_FILTER,
+};
+
+enum _RT_MEDIA_STATUS {
+	RT_MEDIA_DISCONNECT = 0,
+	RT_MEDIA_CONNECT = 1
+};
+
+enum rt_oem_id {
+	RT_CID_DEFAULT = 0,
+	RT_CID_8187_ALPHA0 = 1,
+	RT_CID_8187_SERCOMM_PS = 2,
+	RT_CID_8187_HW_LED = 3,
+	RT_CID_8187_NETGEAR = 4,
+	RT_CID_WHQL = 5,
+	RT_CID_819x_CAMEO = 6,
+	RT_CID_819x_RUNTOP = 7,
+	RT_CID_819x_Senao = 8,
+	RT_CID_TOSHIBA = 9,
+	RT_CID_819x_Netcore = 10,
+	RT_CID_Nettronix = 11,
+	RT_CID_DLINK = 12,
+	RT_CID_PRONET = 13,
+	RT_CID_COREGA = 14,
+	RT_CID_819x_ALPHA = 15,
+	RT_CID_819x_Sitecom = 16,
+	RT_CID_CCX = 17,
+	RT_CID_819x_Lenovo = 18,
+	RT_CID_819x_QMI = 19,
+	RT_CID_819x_Edimax_Belkin = 20,
+	RT_CID_819x_Sercomm_Belkin = 21,
+	RT_CID_819x_CAMEO1 = 22,
+	RT_CID_819x_MSI = 23,
+	RT_CID_819x_Acer = 24,
+	RT_CID_819x_HP = 27,
+	RT_CID_819x_CLEVO = 28,
+	RT_CID_819x_Arcadyan_Belkin = 29,
+	RT_CID_819x_SAMSUNG = 30,
+	RT_CID_819x_WNC_COREGA = 31,
+	RT_CID_819x_Foxcoon = 32,
+	RT_CID_819x_DELL = 33,
+};
+
+enum hw_descs {
+	HW_DESC_OWN,
+	HW_DESC_RXOWN,
+	HW_DESC_TX_NEXTDESC_ADDR,
+	HW_DESC_TXBUFF_ADDR,
+	HW_DESC_RXBUFF_ADDR,
+	HW_DESC_RXPKT_LEN,
+	HW_DESC_RXERO,
+};
+
+enum prime_sc {
+	PRIME_CHNL_OFFSET_DONT_CARE = 0,
+	PRIME_CHNL_OFFSET_LOWER = 1,
+	PRIME_CHNL_OFFSET_UPPER = 2,
+};
+
+enum rf_type {
+	RF_1T1R = 0,
+	RF_1T2R = 1,
+	RF_2T2R = 2,
+};
+
+enum ht_channel_width {
+	HT_CHANNEL_WIDTH_20 = 0,
+	HT_CHANNEL_WIDTH_20_40 = 1,
+};
+
+/* Ref: 802.11i sepc D10.0 7.3.2.25.1
+Cipher Suites Encryption Algorithms */
+enum rt_enc_alg {
+	NO_ENCRYPTION = 0,
+	WEP40_ENCRYPTION = 1,
+	TKIP_ENCRYPTION = 2,
+	RSERVED_ENCRYPTION = 3,
+	AESCCMP_ENCRYPTION = 4,
+	WEP104_ENCRYPTION = 5,
+};
+
+enum rtl_hal_state {
+	_HAL_STATE_STOP = 0,
+	_HAL_STATE_START = 1,
+};
+
+enum rtl_var_map {
+	/*reg map */
+	SYS_ISO_CTRL = 0,
+	SYS_FUNC_EN,
+	SYS_CLK,
+	MAC_RCR_AM,
+	MAC_RCR_AB,
+	MAC_RCR_ACRC32,
+	MAC_RCR_ACF,
+	MAC_RCR_AAP,
+
+	/*efuse map */
+	EFUSE_TEST,
+	EFUSE_CTRL,
+	EFUSE_CLK,
+	EFUSE_CLK_CTRL,
+	EFUSE_PWC_EV12V,
+	EFUSE_FEN_ELDR,
+	EFUSE_LOADER_CLK_EN,
+	EFUSE_ANA8M,
+	EFUSE_HWSET_MAX_SIZE,
+
+	/*CAM map */
+	RWCAM,
+	WCAMI,
+	RCAMO,
+	CAMDBG,
+	SECR,
+	SEC_CAM_NONE,
+	SEC_CAM_WEP40,
+	SEC_CAM_TKIP,
+	SEC_CAM_AES,
+	SEC_CAM_WEP104,
+
+	/*IMR map */
+	RTL_IMR_BCNDMAINT6,	/*Beacon DMA Interrupt 6 */
+	RTL_IMR_BCNDMAINT5,	/*Beacon DMA Interrupt 5 */
+	RTL_IMR_BCNDMAINT4,	/*Beacon DMA Interrupt 4 */
+	RTL_IMR_BCNDMAINT3,	/*Beacon DMA Interrupt 3 */
+	RTL_IMR_BCNDMAINT2,	/*Beacon DMA Interrupt 2 */
+	RTL_IMR_BCNDMAINT1,	/*Beacon DMA Interrupt 1 */
+	RTL_IMR_BCNDOK8,	/*Beacon Queue DMA OK Interrup 8 */
+	RTL_IMR_BCNDOK7,	/*Beacon Queue DMA OK Interrup 7 */
+	RTL_IMR_BCNDOK6,	/*Beacon Queue DMA OK Interrup 6 */
+	RTL_IMR_BCNDOK5,	/*Beacon Queue DMA OK Interrup 5 */
+	RTL_IMR_BCNDOK4,	/*Beacon Queue DMA OK Interrup 4 */
+	RTL_IMR_BCNDOK3,	/*Beacon Queue DMA OK Interrup 3 */
+	RTL_IMR_BCNDOK2,	/*Beacon Queue DMA OK Interrup 2 */
+	RTL_IMR_BCNDOK1,	/*Beacon Queue DMA OK Interrup 1 */
+	RTL_IMR_TIMEOUT2,	/*Timeout interrupt 2 */
+	RTL_IMR_TIMEOUT1,	/*Timeout interrupt 1 */
+	RTL_IMR_TXFOVW,		/*Transmit FIFO Overflow */
+	RTL_IMR_PSTIMEOUT,	/*Power save time out interrupt */
+	RTL_IMR_BcnInt,		/*Beacon DMA Interrupt 0 */
+	RTL_IMR_RXFOVW,		/*Receive FIFO Overflow */
+	RTL_IMR_RDU,		/*Receive Descriptor Unavailable */
+	RTL_IMR_ATIMEND,	/*For 92C,ATIM Window End Interrupt */
+	RTL_IMR_BDOK,		/*Beacon Queue DMA OK Interrup */
+	RTL_IMR_HIGHDOK,	/*High Queue DMA OK Interrupt */
+	RTL_IMR_TBDOK,		/*Transmit Beacon OK interrup */
+	RTL_IMR_MGNTDOK,	/*Management Queue DMA OK Interrupt */
+	RTL_IMR_TBDER,		/*For 92C,Transmit Beacon Error Interrupt */
+	RTL_IMR_BKDOK,		/*AC_BK DMA OK Interrupt */
+	RTL_IMR_BEDOK,		/*AC_BE DMA OK Interrupt */
+	RTL_IMR_VIDOK,		/*AC_VI DMA OK Interrupt */
+	RTL_IMR_VODOK,		/*AC_VO DMA Interrupt */
+	RTL_IMR_ROK,		/*Receive DMA OK Interrupt */
+	RTL_IBSS_INT_MASKS,	/*(RTL_IMR_BcnInt|RTL_IMR_TBDOK|RTL_IMR_TBDER)*/
+
+	/*CCK Rates, TxHT = 0 */
+	RTL_RC_CCK_RATE1M,
+	RTL_RC_CCK_RATE2M,
+	RTL_RC_CCK_RATE5_5M,
+	RTL_RC_CCK_RATE11M,
+
+	/*OFDM Rates, TxHT = 0 */
+	RTL_RC_OFDM_RATE6M,
+	RTL_RC_OFDM_RATE9M,
+	RTL_RC_OFDM_RATE12M,
+	RTL_RC_OFDM_RATE18M,
+	RTL_RC_OFDM_RATE24M,
+	RTL_RC_OFDM_RATE36M,
+	RTL_RC_OFDM_RATE48M,
+	RTL_RC_OFDM_RATE54M,
+
+	RTL_RC_HT_RATEMCS7,
+	RTL_RC_HT_RATEMCS15,
+
+	/*keep it last */
+	RTL_VAR_MAP_MAX,
+};
+
+/*Firmware PS mode for control LPS.*/
+enum _fw_ps_mode {
+	FW_PS_ACTIVE_MODE = 0,
+	FW_PS_MIN_MODE = 1,
+	FW_PS_MAX_MODE = 2,
+	FW_PS_DTIM_MODE = 3,
+	FW_PS_VOIP_MODE = 4,
+	FW_PS_UAPSD_WMM_MODE = 5,
+	FW_PS_UAPSD_MODE = 6,
+	FW_PS_IBSS_MODE = 7,
+	FW_PS_WWLAN_MODE = 8,
+	FW_PS_PM_Radio_Off = 9,
+	FW_PS_PM_Card_Disable = 10,
+};
+
+enum rt_psmode {
+	EACTIVE,		/*Active/Continuous access. */
+	EMAXPS,			/*Max power save mode. */
+	EFASTPS,		/*Fast power save mode. */
+	EAUTOPS,		/*Auto power save mode. */
+};
+
+/*LED related.*/
+enum led_ctl_mode {
+	LED_CTL_POWER_ON = 1,
+	LED_CTL_LINK = 2,
+	LED_CTL_NO_LINK = 3,
+	LED_CTL_TX = 4,
+	LED_CTL_RX = 5,
+	LED_CTL_SITE_SURVEY = 6,
+	LED_CTL_POWER_OFF = 7,
+	LED_CTL_START_TO_LINK = 8,
+	LED_CTL_START_WPS = 9,
+	LED_CTL_STOP_WPS = 10,
+};
+
+enum rtl_led_pin {
+	LED_PIN_GPIO0,
+	LED_PIN_LED0,
+	LED_PIN_LED1,
+	LED_PIN_LED2
+};
+
+/*QoS related.*/
+/*acm implementation method.*/
+enum acm_method {
+	eAcmWay0_SwAndHw = 0,
+	eAcmWay1_HW = 1,
+	eAcmWay2_SW = 2,
+};
+
+/*aci/aifsn Field.
+Ref: WMM spec 2.2.2: WME Parameter Element, p.12.*/
+union aci_aifsn {
+	u8 char_data;
+
+	struct {
+		u8 aifsn:4;
+		u8 acm:1;
+		u8 aci:2;
+		u8 reserved:1;
+	} f;			/* Field */
+};
+
+/*mlme related.*/
+enum wireless_mode {
+	WIRELESS_MODE_UNKNOWN = 0x00,
+	WIRELESS_MODE_A = 0x01,
+	WIRELESS_MODE_B = 0x02,
+	WIRELESS_MODE_G = 0x04,
+	WIRELESS_MODE_AUTO = 0x08,
+	WIRELESS_MODE_N_24G = 0x10,
+	WIRELESS_MODE_N_5G = 0x20
+};
+
+enum ratr_table_mode {
+	RATR_INX_WIRELESS_NGB = 0,
+	RATR_INX_WIRELESS_NG = 1,
+	RATR_INX_WIRELESS_NB = 2,
+	RATR_INX_WIRELESS_N = 3,
+	RATR_INX_WIRELESS_GB = 4,
+	RATR_INX_WIRELESS_G = 5,
+	RATR_INX_WIRELESS_B = 6,
+	RATR_INX_WIRELESS_MC = 7,
+	RATR_INX_WIRELESS_A = 8,
+};
+
+enum rtl_link_state {
+	MAC80211_NOLINK = 0,
+	MAC80211_LINKING = 1,
+	MAC80211_LINKED = 2,
+	MAC80211_LINKED_SCANNING = 3,
+};
+
+enum act_category {
+	ACT_CAT_QOS = 1,
+	ACT_CAT_DLS = 2,
+	ACT_CAT_BA = 3,
+	ACT_CAT_HT = 7,
+	ACT_CAT_WMM = 17,
+};
+
+enum ba_action {
+	ACT_ADDBAREQ = 0,
+	ACT_ADDBARSP = 1,
+	ACT_DELBA = 2,
+};
+
+struct octet_string {
+	u8 *octet;
+	u16 length;
+};
+
+struct rtl_hdr_3addr {
+	__le16 frame_ctl;
+	__le16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	__le16 seq_ctl;
+	u8 payload[0];
+} __packed;
+
+struct rtl_info_element {
+	u8 id;
+	u8 len;
+	u8 data[0];
+} __packed;
+
+struct rtl_probe_rsp {
+	struct rtl_hdr_3addr header;
+	u32 time_stamp[2];
+	__le16 beacon_interval;
+	__le16 capability;
+	/*SSID, supported rates, FH params, DS params,
+	   CF params, IBSS params, TIM (if beacon), RSN */
+	struct rtl_info_element info_element[0];
+} __packed;
+
+/*LED related.*/
+/*ledpin Identify how to implement this SW led.*/
+struct rtl_led {
+	void *hw;
+	enum rtl_led_pin ledpin;
+	bool b_ledon;
+};
+
+struct rtl_led_ctl {
+	bool bled_opendrain;
+	struct rtl_led sw_led0;
+	struct rtl_led sw_led1;
+};
+
+struct rtl_qos_parameters {
+	__le16 cw_min;
+	__le16 cw_max;
+	u8 aifs;
+	u8 flag;
+	__le16 tx_op;
+} __packed;
+
+struct rt_smooth_data {
+	u32 elements[100];	/*array to store values */
+	u32 index;		/*index to current array to store */
+	u32 total_num;		/*num of valid elements */
+	u32 total_val;		/*sum of valid elements */
+};
+
+struct false_alarm_statistics {
+	u32 cnt_parity_fail;
+	u32 cnt_rate_illegal;
+	u32 cnt_crc8_fail;
+	u32 cnt_mcs_fail;
+	u32 cnt_ofdm_fail;
+	u32 cnt_cck_fail;
+	u32 cnt_all;
+};
+
+struct init_gain {
+	u8 xaagccore1;
+	u8 xbagccore1;
+	u8 xcagccore1;
+	u8 xdagccore1;
+	u8 cca;
+
+};
+
+struct wireless_stats {
+	unsigned long txbytesunicast;
+	unsigned long txbytesmulticast;
+	unsigned long txbytesbroadcast;
+	unsigned long rxbytesunicast;
+
+	long rx_snr_db[4];
+	/*Correct smoothed ss in Dbm, only used
+	   in driver to report real power now. */
+	long recv_signal_power;
+	long signal_quality;
+	long last_sigstrength_inpercent;
+
+	u32 rssi_calculate_cnt;
+
+	/*Transformed, in dbm. Beautified signal
+	   strength for UI, not correct. */
+	long signal_strength;
+
+	u8 rx_rssi_percentage[4];
+	u8 rx_evm_percentage[2];
+
+	struct rt_smooth_data ui_rssi;
+	struct rt_smooth_data ui_link_quality;
+};
+
+struct rate_adaptive {
+	u8 rate_adaptive_disabled;
+	u8 ratr_state;
+	u16 reserve;
+
+	u32 high_rssi_thresh_for_ra;
+	u32 high2low_rssi_thresh_for_ra;
+	u8 low2high_rssi_thresh_for_ra40m;
+	u32 low_rssi_thresh_for_ra40M;
+	u8 low2high_rssi_thresh_for_ra20m;
+	u32 low_rssi_thresh_for_ra20M;
+	u32 upper_rssi_threshold_ratr;
+	u32 middleupper_rssi_threshold_ratr;
+	u32 middle_rssi_threshold_ratr;
+	u32 middlelow_rssi_threshold_ratr;
+	u32 low_rssi_threshold_ratr;
+	u32 ultralow_rssi_threshold_ratr;
+	u32 low_rssi_threshold_ratr_40m;
+	u32 low_rssi_threshold_ratr_20m;
+	u8 ping_rssi_enable;
+	u32 ping_rssi_ratr;
+	u32 ping_rssi_thresh_for_ra;
+	u32 last_ratr;
+	u8 pre_ratr_state;
+};
+
+struct regd_pair_mapping {
+	u16 reg_dmnenum;
+	u16 reg_5ghz_ctl;
+	u16 reg_2ghz_ctl;
+};
+
+struct rtl_regulatory {
+	char alpha2[2];
+	u16 country_code;
+	u16 max_power_level;
+	u32 tp_scale;
+	u16 current_rd;
+	u16 current_rd_ext;
+	int16_t power_limit;
+	struct regd_pair_mapping *regpair;
+};
+
+struct rtl_rfkill {
+	bool rfkill_state;	/*0 is off, 1 is on */
+};
+
+struct rtl_phy {
+	struct bb_reg_def phyreg_def[4];	/*Radio A/B/C/D */
+	struct init_gain initgain_backup;
+	enum io_type current_io_type;
+
+	u8 rf_mode;
+	u8 rf_type;
+	u8 current_chan_bw;
+	u8 set_bwmode_inprogress;
+	u8 sw_chnl_inprogress;
+	u8 sw_chnl_stage;
+	u8 sw_chnl_step;
+	u8 current_channel;
+	u8 h2c_box_num;
+	u8 set_io_inprogress;
+
+	/*record for power tracking*/
+	s32 reg_e94;
+	s32 reg_e9c;
+	s32 reg_ea4;
+	s32 reg_eac;
+	s32 reg_eb4;
+	s32 reg_ebc;
+	s32 reg_ec4;
+	s32 reg_ecc;
+	u8 rfpienable;
+	u8 reserve_0;
+	u16 reserve_1;
+	u32 reg_c04, reg_c08, reg_874;
+	u32 adda_backup[16];
+	u32 iqk_mac_backup[IQK_MAC_REG_NUM];
+	u32 iqk_bb_backup[10];
+
+	bool b_rfpi_enable;
+
+	u8 pwrgroup_cnt;
+	u8 bcck_high_power;
+	/* 3 groups of pwr diff by rates*/
+	u32 mcs_txpwrlevel_origoffset[4][16];
+	u8 default_initialgain[4];
+
+	/*the current Tx power level*/
+	u8 cur_cck_txpwridx;
+	u8 cur_ofdm24g_txpwridx;
+
+	u32 rfreg_chnlval[2];
+	bool b_apk_done;
+
+	/*fsync*/
+	u8 framesync;
+	u32 framesync_c34;
+
+	u8 num_total_rfpath;
+};
+
+#define MAX_TID_COUNT				9
+#define RTL_AGG_OFF				0
+#define RTL_AGG_ON				1
+#define RTL_AGG_EMPTYING_HW_QUEUE_ADDBA		2
+#define RTL_AGG_EMPTYING_HW_QUEUE_DELBA		3
+
+struct rtl_ht_agg {
+	u16 txq_id;
+	u16 wait_for_ba;
+	u16 start_idx;
+	u64 bitmap;
+	u32 rate_n_flags;
+	u8 agg_state;
+};
+
+struct rtl_tid_data {
+	u16 seq_number;
+	struct rtl_ht_agg agg;
+};
+
+struct rtl_priv;
+struct rtl_io {
+	struct device *dev;
+
+	/*PCI MEM map */
+	unsigned long pci_mem_end;	/*shared mem end        */
+	unsigned long pci_mem_start;	/*shared mem start */
+
+	/*PCI IO map */
+	unsigned long pci_base_addr;	/*device I/O address */
+
+	void (*write8_async) (struct rtl_priv *rtlpriv, u32 addr, u8 val);
+	void (*write16_async) (struct rtl_priv *rtlpriv, u32 addr, u16 val);
+	void (*write32_async) (struct rtl_priv *rtlpriv, u32 addr, u32 val);
+
+	 u8(*read8_sync) (struct rtl_priv *rtlpriv, u32 addr);
+	 u16(*read16_sync) (struct rtl_priv *rtlpriv, u32 addr);
+	 u32(*read32_sync) (struct rtl_priv *rtlpriv, u32 addr);
+
+};
+
+struct rtl_mac {
+	u8 mac_addr[ETH_ALEN];
+	u8 mac80211_registered;
+	u8 beacon_enabled;
+
+	u32 tx_ss_num;
+	u32 rx_ss_num;
+
+	struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
+	struct ieee80211_hw *hw;
+	struct ieee80211_vif *vif;
+	enum nl80211_iftype opmode;
+
+	/*Probe Beacon management */
+	struct rtl_tid_data tids[MAX_TID_COUNT];
+	enum rtl_link_state link_state;
+
+	int n_channels;
+	int n_bitrates;
+
+	/*filters */
+	u32 rx_conf;
+	u16 rx_mgt_filter;
+	u16 rx_ctrl_filter;
+	u16 rx_data_filter;
+
+	bool act_scanning;
+	u8 cnt_after_linked;
+
+	 /*RDG*/ bool rdg_en;
+
+	 /*AP*/ u8 bssid[6];
+	u8 mcs[16];	/*16 bytes mcs for HT rates.*/
+	u32 basic_rates; /*b/g rates*/
+	u8 ht_enable;
+	u8 sgi_40;
+	u8 sgi_20;
+	u8 bw_40;
+	u8 mode;		/*wireless mode*/
+	u8 slot_time;
+	u8 short_preamble;
+	u8 use_cts_protect;
+	u8 cur_40_prime_sc;
+	u8 cur_40_prime_sc_bk;
+	u64 tsf;
+	u8 retry_short;
+	u8 retry_long;
+	u16 assoc_id;
+
+	 /*IBSS*/ int beacon_interval;
+
+	 /*AMPDU*/ u8 min_space_cfg;	/*For Min spacing configurations */
+	u8 max_mss_density;
+	u8 current_ampdu_factor;
+	u8 current_ampdu_density;
+
+	/*QOS & EDCA */
+	struct ieee80211_tx_queue_params edca_param[RTL_MAC80211_NUM_QUEUE];
+	struct rtl_qos_parameters ac[AC_MAX];
+};
+
+struct rtl_hal {
+	struct ieee80211_hw *hw;
+
+	enum intf_type interface;
+	u16 hw_type;		/*92c or 92d or 92s and so on */
+	u8 oem_id;
+	u8 version;		/*version of chip */
+	u8 state;		/*stop 0, start 1 */
+
+	/*firmware */
+	u8 *pfirmware;
+	bool b_h2c_setinprogress;
+	u8 last_hmeboxnum;
+	bool bfw_ready;
+	/*Reserve page start offset except beacon in TxQ. */
+	u8 fw_rsvdpage_startoffset;
+};
+
+struct rtl_security {
+	/*default 0 */
+	bool use_sw_sec;
+
+	bool being_setkey;
+	bool use_defaultkey;
+	/*Encryption Algorithm for Unicast Packet */
+	enum rt_enc_alg pairwise_enc_algorithm;
+	/*Encryption Algorithm for Brocast/Multicast */
+	enum rt_enc_alg group_enc_algorithm;
+
+	/*local Key buffer, indx 0 is for
+	   pairwise key 1-4 is for agoup key. */
+	u8 key_buf[KEY_BUF_SIZE][MAX_KEY_LEN];
+	u8 key_len[KEY_BUF_SIZE];
+
+	/*The pointer of Pairwise Key,
+	   it always points to KeyBuf[4] */
+	u8 *pairwise_key;
+};
+
+struct rtl_dm {
+	/*PHY status for DM */
+	long entry_min_undecoratedsmoothed_pwdb;
+	long undecorated_smoothed_pwdb;	/*out dm */
+	long entry_max_undecoratedsmoothed_pwdb;
+	bool b_dm_initialgain_enable;
+	bool bdynamic_txpower_enable;
+	bool bcurrent_turbo_edca;
+	bool bis_any_nonbepkts;	/*out dm */
+	bool bis_cur_rdlstate;
+	bool btxpower_trackingInit;
+	bool b_disable_framebursting;
+	bool b_cck_inch14;
+	bool btxpower_tracking;
+	bool b_useramask;
+	bool brfpath_rxenable[4];
+
+	u8 thermalvalue_iqk;
+	u8 thermalvalue_lck;
+	u8 thermalvalue;
+	u8 last_dtp_lvl;
+	u8 dynamic_txhighpower_lvl;	/*Tx high power level */
+	u8 dm_flag;	/*Indicate if each dynamic mechanism's status. */
+	u8 dm_type;
+	u8 txpower_track_control;
+
+	char ofdm_index[2];
+	char cck_index;
+};
+
+#define	EFUSE_MAX_LOGICAL_SIZE			 128
+
+struct rtl_efuse {
+	bool bautoLoad_ok;
+	bool bootfromefuse;
+	u16 max_physical_size;
+	u8 contents[EFUSE_MAX_LOGICAL_SIZE];
+
+	u8 efuse_map[2][EFUSE_MAX_LOGICAL_SIZE];
+	u16 efuse_usedbytes;
+	u8 efuse_usedpercentage;
+
+	u8 autoload_failflag;
+
+	short epromtype;
+	u16 eeprom_vid;
+	u16 eeprom_did;
+	u16 eeprom_svid;
+	u16 eeprom_smid;
+	u8 eeprom_oemid;
+	u16 eeprom_channelplan;
+	u8 eeprom_version;
+
+	u8 dev_addr[6];
+
+	bool b_txpwr_fromeprom;
+	u8 eeprom_tssi[2];
+	u8 eeprom_pwrlimit_ht20[3];
+	u8 eeprom_pwrlimit_ht40[3];
+	u8 eeprom_chnlarea_txpwr_cck[2][3];
+	u8 eeprom_chnlarea_txpwr_ht40_1s[2][3];
+	u8 eeprom_chnlarea_txpwr_ht40_2sdiif[2][3];
+	u8 txpwrlevel_cck[2][14];
+	u8 txpwrlevel_ht40_1s[2][14];	/*For HT 40MHZ pwr */
+	u8 txpwrlevel_ht40_2s[2][14];	/*For HT 40MHZ pwr */
+
+	/*For power group */
+	u8 pwrgroup_ht20[2][14];
+	u8 pwrgroup_ht40[2][14];
+
+	char txpwr_ht20diff[2][14];	/*HT 20<->40 Pwr diff */
+	u8 txpwr_legacyhtdiff[2][14];	/*For HT<->legacy pwr diff */
+
+	u8 eeprom_regulatory;
+	u8 eeprom_thermalmeter;
+	/*ThermalMeter, index 0 for RFIC0, and 1 for RFIC1 */
+	u8 thermalmeter[2];
+
+	u8 legacy_ht_txpowerdiff;	/*Legacy to HT rate power diff */
+	bool b_apk_thermalmeterignore;
+};
+
+struct rtl_ps_ctl {
+	bool set_rfpowerstate_inprogress;
+	bool b_in_powersavemode;
+	bool rfchange_inprogress;
+	bool b_swrf_processing;
+	bool b_hwradiooff;
+
+	u32 last_sleep_jiffies;
+	u32 last_awake_jiffies;
+	u32 last_delaylps_stamp_jiffies;
+
+	/*
+	 * just for PCIE ASPM
+	 * If it supports ASPM, Offset[560h] = 0x40,
+	 * otherwise Offset[560h] = 0x00.
+	 * */
+	bool b_support_aspm;
+	bool b_support_backdoor;
+
+	/*for LPS */
+	enum rt_psmode dot11_psmode;	/*Power save mode configured. */
+	bool b_leisure_ps;
+	bool b_fwctrl_lps;
+	u8 fwctrl_psmode;
+	/*For Fw control LPS mode */
+	u8 b_reg_fwctrl_lps;
+	/*Record Fw PS mode status. */
+	bool b_fw_current_inpsmode;
+	u8 reg_max_lps_awakeintvl;
+	bool report_linked;
+
+	/*for IPS */
+	bool b_inactiveps;
+
+	u32 rfoff_reason;
+
+	/*RF OFF Level */
+	u32 cur_ps_level;
+	u32 reg_rfps_level;
+
+	/*just for PCIE ASPM */
+	u8 const_amdpci_aspm;
+
+	enum rf_pwrstate inactive_pwrstate;
+	enum rf_pwrstate rfpwr_state;	/*cur power state */
+};
+
+struct rtl_stats {
+	u32 mac_time[2];
+	s8 rssi;
+	u8 signal;
+	u8 noise;
+	u16 rate;		/*in 100 kbps */
+	u8 received_channel;
+	u8 control;
+	u8 mask;
+	u8 freq;
+	u16 len;
+	u64 tsf;
+	u32 beacon_time;
+	u8 nic_type;
+	u16 length;
+	u8 signalquality;	/*in 0-100 index. */
+	/*
+	 * Real power in dBm for this packet,
+	 * no beautification and aggregation.
+	 * */
+	s32 recvsignalpower;
+	s8 rxpower;		/*in dBm Translate from PWdB */
+	u8 signalstrength;	/*in 0-100 index. */
+	u16 b_hwerror:1;
+	u16 b_crc:1;
+	u16 b_icv:1;
+	u16 b_shortpreamble:1;
+	u16 antenna:1;
+	u16 decrypted:1;
+	u16 wakeup:1;
+	u32 timestamp_low;
+	u32 timestamp_high;
+
+	u8 rx_drvinfo_size;
+	u8 rx_bufshift;
+	bool b_isampdu;
+	bool rx_is40Mhzpacket;
+	u32 rx_pwdb_all;
+	u8 rx_mimo_signalstrength[4];	/*in 0~100 index */
+	s8 rx_mimo_signalquality[2];
+	bool b_packet_matchbssid;
+	bool b_is_cck;
+	bool b_packet_toself;
+	bool b_packet_beacon;	/*for rssi */
+	char cck_adc_pwdb[4];	/*for rx path selection */
+};
+
+struct rt_link_detect {
+	u32 num_tx_in4period[4];
+	u32 num_rx_in4period[4];
+
+	u32 num_tx_inperiod;
+	u32 num_rx_inperiod;
+
+	bool b_busytraffic;
+	bool b_higher_busytraffic;
+	bool b_higher_busyrxtraffic;
+};
+
+struct rtl_tcb_desc {
+	u8 b_packet_bw:1;
+	u8 b_multicast:1;
+	u8 b_broadcast:1;
+
+	u8 b_rts_stbc:1;
+	u8 b_rts_enable:1;
+	u8 b_cts_enable:1;
+	u8 b_rts_use_shortpreamble:1;
+	u8 b_rts_use_shortgi:1;
+	u8 rts_sc:1;
+	u8 b_rts_bw:1;
+	u8 rts_rate;
+
+	u8 use_shortgi:1;
+	u8 use_shortpreamble:1;
+	u8 use_driver_rate:1;
+	u8 disable_ratefallback:1;
+
+	u8 ratr_index;
+	u8 mac_id;
+	u8 hw_rate;
+};
+
+struct rtl_hal_ops {
+	int (*init_sw_vars) (struct ieee80211_hw *hw);
+	void (*deinit_sw_vars) (struct ieee80211_hw *hw);
+	void (*read_eeprom_info) (struct ieee80211_hw *hw);
+	void (*interrupt_recognized) (struct ieee80211_hw *hw,
+				      u32 *p_inta, u32 *p_intb);
+	int (*hw_init) (struct ieee80211_hw *hw);
+	void (*hw_disable) (struct ieee80211_hw *hw);
+	void (*enable_interrupt) (struct ieee80211_hw *hw);
+	void (*disable_interrupt) (struct ieee80211_hw *hw);
+	int (*set_network_type) (struct ieee80211_hw *hw,
+				 enum nl80211_iftype type);
+	void (*set_bw_mode) (struct ieee80211_hw *hw,
+			     enum nl80211_channel_type ch_type);
+	 u8(*switch_channel) (struct ieee80211_hw *hw);
+	void (*set_qos) (struct ieee80211_hw *hw, int aci);
+	void (*set_bcn_reg) (struct ieee80211_hw *hw);
+	void (*set_bcn_intv) (struct ieee80211_hw *hw);
+	void (*update_interrupt_mask) (struct ieee80211_hw *hw,
+				       u32 add_msr, u32 rm_msr);
+	void (*get_hw_reg) (struct ieee80211_hw *hw, u8 variable, u8 *val);
+	void (*set_hw_reg) (struct ieee80211_hw *hw, u8 variable, u8 *val);
+	void (*update_rate_table) (struct ieee80211_hw *hw);
+	void (*update_rate_mask) (struct ieee80211_hw *hw, u8 rssi_level);
+	void (*fill_tx_desc) (struct ieee80211_hw *hw,
+			      struct ieee80211_hdr *hdr, u8 *pdesc_tx,
+			      struct ieee80211_tx_info *info,
+			      struct sk_buff *skb, unsigned int queue_index);
+	void (*fill_tx_cmddesc) (struct ieee80211_hw *hw, u8 *pdesc,
+				 bool b_firstseg, bool b_lastseg,
+				 struct sk_buff *skb);
+	 bool(*query_rx_desc) (struct ieee80211_hw *hw,
+			       struct rtl_stats *stats,
+			       struct ieee80211_rx_status *rx_status,
+			       u8 *pdesc, struct sk_buff *skb);
+	void (*set_channel_access) (struct ieee80211_hw *hw);
+	 bool(*radio_onoff_checking) (struct ieee80211_hw *hw, u8 *valid);
+	void (*dm_watchdog) (struct ieee80211_hw *hw);
+	void (*scan_operation_backup) (struct ieee80211_hw *hw, u8 operation);
+	 bool(*set_rf_power_state) (struct ieee80211_hw *hw,
+				    enum rf_pwrstate rfpwr_state);
+	void (*led_control) (struct ieee80211_hw *hw,
+			     enum led_ctl_mode ledaction);
+	void (*set_desc) (u8 *pdesc, bool istx, u8 desc_name, u8 *val);
+	 u32(*get_desc) (u8 *pdesc, bool istx, u8 desc_name);
+	void (*tx_polling) (struct ieee80211_hw *hw, unsigned int hw_queue);
+	void (*enable_hw_sec) (struct ieee80211_hw *hw);
+	void (*set_key) (struct ieee80211_hw *hw, u32 key_index,
+			 u8 *p_macaddr, bool is_group, u8 enc_algo,
+			 bool is_wepkey, bool clear_all);
+	void (*init_sw_leds) (struct ieee80211_hw *hw);
+	void (*deinit_sw_leds) (struct ieee80211_hw *hw);
+	 u32(*get_bbreg) (struct ieee80211_hw *hw, u32 regaddr, u32 bitmask);
+	void (*set_bbreg) (struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+			   u32 data);
+	 u32(*get_rfreg) (struct ieee80211_hw *hw, enum radio_path rfpath,
+			  u32 regaddr, u32 bitmask);
+	void (*set_rfreg) (struct ieee80211_hw *hw, enum radio_path rfpath,
+			   u32 regaddr, u32 bitmask, u32 data);
+};
+
+struct rtl_intf_ops {
+	/*com */
+	int (*adapter_start) (struct ieee80211_hw *hw);
+	void (*adapter_stop) (struct ieee80211_hw *hw);
+
+	int (*adapter_tx) (struct ieee80211_hw *hw, struct sk_buff *skb);
+	int (*reset_trx_ring) (struct ieee80211_hw *hw);
+
+	/*pci */
+	void (*disable_aspm) (struct ieee80211_hw *hw);
+	void (*enable_aspm) (struct ieee80211_hw *hw);
+
+	/*usb */
+};
+
+struct rtl_mod_params {
+	/* default: 0 = using hardware encryption */
+	int sw_crypto;
+};
+
+struct rtl_hal_cfg {
+	char *name;
+	char *fw_name;
+	struct rtl_hal_ops *ops;
+	struct rtl_mod_params *mod_params;
+
+	/*this map used for some registers or vars
+	   defined int HAL but used in MAIN */
+	u32 maps[RTL_VAR_MAP_MAX];
+
+};
+
+struct rtl_locks {
+	/* mutex */
+	struct mutex conf_mutex;
+
+	/*spin lock */
+	spinlock_t ips_lock;
+	spinlock_t irq_th_lock;
+	spinlock_t h2c_lock;
+	spinlock_t rf_ps_lock;
+	spinlock_t rf_lock;
+	spinlock_t lps_lock;
+};
+
+struct rtl_works {
+	struct ieee80211_hw *hw;
+
+	/*timer */
+	struct timer_list watchdog_timer;
+
+	/*task */
+	struct tasklet_struct irq_tasklet;
+	struct tasklet_struct irq_prepare_bcn_tasklet;
+
+	/*work queue */
+	struct workqueue_struct *rtl_wq;
+	struct delayed_work watchdog_wq;
+	struct delayed_work ips_nic_off_wq;
+};
+
+struct rtl_debug {
+	u32 dbgp_type[DBGP_TYPE_MAX];
+	u32 global_debuglevel;
+	u64 global_debugcomponents;
+};
+
+struct rtl_priv {
+	struct rtl_locks locks;
+	struct rtl_works works;
+	struct rtl_mac mac80211;
+	struct rtl_hal rtlhal;
+	struct rtl_regulatory regd;
+	struct rtl_rfkill rfkill;
+	struct rtl_io io;
+	struct rtl_phy phy;
+	struct rtl_dm dm;
+	struct rtl_security sec;
+	struct rtl_efuse efuse;
+
+	struct rtl_ps_ctl psc;
+	struct rate_adaptive ra;
+	struct wireless_stats stats;
+	struct rt_link_detect link_info;
+	struct false_alarm_statistics falsealm_cnt;
+
+	struct rtl_rate_priv *rate_priv;
+
+	struct rtl_debug dbg;
+
+	/*
+	 *hal_cfg : for diff cards
+	 *intf_ops : for diff interrface usb/pcie
+	 */
+	struct rtl_hal_cfg *cfg;
+	struct rtl_intf_ops *intf_ops;
+
+	/*this var will be set by set_bit,
+	   and was used to indicate status of
+	   interface or hardware */
+	unsigned long status;
+
+	/*This must be the last item so
+	   that it points to the data allocated
+	   beyond  this structure like:
+	   rtl_pci_priv or rtl_usb_priv */
+	u8 priv[0];
+};
+
+#define rtl_priv(hw)		(((struct rtl_priv *)(hw)->priv))
+#define rtl_mac(rtlpriv)	(&((rtlpriv)->mac80211))
+#define rtl_hal(rtlpriv)	(&((rtlpriv)->rtlhal))
+#define rtl_efuse(rtlpriv)	(&((rtlpriv)->efuse))
+#define rtl_psc(rtlpriv)	(&((rtlpriv)->psc))
+
+/****************************************
+	mem access macro define start
+	Call endian free function when
+	1. Read/write packet content.
+	2. Before write integer to IO.
+	3. After read integer from IO.
+****************************************/
+/* Convert little data endian to host */
+#define EF1BYTE(_val)		\
+	((u8)(_val))
+#define EF2BYTE(_val)		\
+	(le16_to_cpu(_val))
+#define EF4BYTE(_val)		\
+	(le32_to_cpu(_val))
+
+/* Read data from memory */
+#define READEF1BYTE(_ptr)	\
+	EF1BYTE(*((u8 *)(_ptr)))
+#define READEF2BYTE(_ptr)	\
+	EF2BYTE(*((u16 *)(_ptr)))
+#define READEF4BYTE(_ptr)	\
+	EF4BYTE(*((u32 *)(_ptr)))
+
+/* Write data to memory */
+#define WRITEEF1BYTE(_ptr, _val)	\
+	(*((u8 *)(_ptr))) = EF1BYTE(_val)
+#define WRITEEF2BYTE(_ptr, _val)	\
+	(*((u16 *)(_ptr))) = EF2BYTE(_val)
+#define WRITEEF4BYTE(_ptr, _val)	\
+	(*((u32 *)(_ptr))) = EF4BYTE(_val)
+
+/*Example:
+BIT_LEN_MASK_32(0) => 0x00000000
+BIT_LEN_MASK_32(1) => 0x00000001
+BIT_LEN_MASK_32(2) => 0x00000003
+BIT_LEN_MASK_32(32) => 0xFFFFFFFF*/
+#define BIT_LEN_MASK_32(__bitlen)	 \
+	(0xFFFFFFFF >> (32 - (__bitlen)))
+#define BIT_LEN_MASK_16(__bitlen)	 \
+	(0xFFFF >> (16 - (__bitlen)))
+#define BIT_LEN_MASK_8(__bitlen) \
+	(0xFF >> (8 - (__bitlen)))
+
+/*Example:
+BIT_OFFSET_LEN_MASK_32(0, 2) => 0x00000003
+BIT_OFFSET_LEN_MASK_32(16, 2) => 0x00030000*/
+#define BIT_OFFSET_LEN_MASK_32(__bitoffset, __bitlen) \
+	(BIT_LEN_MASK_32(__bitlen) << (__bitoffset))
+#define BIT_OFFSET_LEN_MASK_16(__bitoffset, __bitlen) \
+	(BIT_LEN_MASK_16(__bitlen) << (__bitoffset))
+#define BIT_OFFSET_LEN_MASK_8(__bitoffset, __bitlen) \
+	(BIT_LEN_MASK_8(__bitlen) << (__bitoffset))
+
+/*Description:
+Return 4-byte value in host byte ordering from
+4-byte pointer in little-endian system.*/
+#define LE_P4BYTE_TO_HOST_4BYTE(__pstart) \
+	(EF4BYTE(*((u32 *)(__pstart))))
+#define LE_P2BYTE_TO_HOST_2BYTE(__pstart) \
+	(EF2BYTE(*((u16 *)(__pstart))))
+#define LE_P1BYTE_TO_HOST_1BYTE(__pstart) \
+	(EF1BYTE(*((u8 *)(__pstart))))
+
+/*Description:
+Translate subfield (continuous bits in little-endian) of 4-byte
+value to host byte ordering.*/
+#define LE_BITS_TO_4BYTE(__pstart, __bitoffset, __bitlen) \
+	( \
+		(LE_P4BYTE_TO_HOST_4BYTE(__pstart) >> (__bitoffset))  & \
+		BIT_LEN_MASK_32(__bitlen) \
+	)
+#define LE_BITS_TO_2BYTE(__pstart, __bitoffset, __bitlen) \
+	( \
+		(LE_P2BYTE_TO_HOST_2BYTE(__pstart) >> (__bitoffset)) & \
+		BIT_LEN_MASK_16(__bitlen) \
+	)
+#define LE_BITS_TO_1BYTE(__pstart, __bitoffset, __bitlen) \
+	( \
+		(LE_P1BYTE_TO_HOST_1BYTE(__pstart) >> (__bitoffset)) & \
+		BIT_LEN_MASK_8(__bitlen) \
+	)
+
+/*Description:
+Mask subfield (continuous bits in little-endian) of 4-byte value
+and return the result in 4-byte value in host byte ordering.*/
+#define LE_BITS_CLEARED_TO_4BYTE(__pstart, __bitoffset, __bitlen) \
+	( \
+		LE_P4BYTE_TO_HOST_4BYTE(__pstart)  & \
+		(~BIT_OFFSET_LEN_MASK_32(__bitoffset, __bitlen)) \
+	)
+#define LE_BITS_CLEARED_TO_2BYTE(__pstart, __bitoffset, __bitlen) \
+	( \
+		LE_P2BYTE_TO_HOST_2BYTE(__pstart) & \
+		(~BIT_OFFSET_LEN_MASK_16(__bitoffset, __bitlen)) \
+	)
+#define LE_BITS_CLEARED_TO_1BYTE(__pstart, __bitoffset, __bitlen) \
+	( \
+		LE_P1BYTE_TO_HOST_1BYTE(__pstart) & \
+		(~BIT_OFFSET_LEN_MASK_8(__bitoffset, __bitlen)) \
+	)
+
+/*Description:
+Set subfield of little-endian 4-byte value to specified value.	*/
+#define SET_BITS_TO_LE_4BYTE(__pstart, __bitoffset, __bitlen, __val) \
+	*((u32 *)(__pstart)) = EF4BYTE \
+	( \
+		LE_BITS_CLEARED_TO_4BYTE(__pstart, __bitoffset, __bitlen) | \
+		((((u32)__val) & BIT_LEN_MASK_32(__bitlen)) << (__bitoffset)) \
+	);
+#define SET_BITS_TO_LE_2BYTE(__pstart, __bitoffset, __bitlen, __val) \
+	*((u16 *)(__pstart)) = EF2BYTE \
+	( \
+		LE_BITS_CLEARED_TO_2BYTE(__pstart, __bitoffset, __bitlen) | \
+		((((u16)__val) & BIT_LEN_MASK_16(__bitlen)) << (__bitoffset)) \
+	);
+#define SET_BITS_TO_LE_1BYTE(__pstart, __bitoffset, __bitlen, __val) \
+	*((u8 *)(__pstart)) = EF1BYTE \
+	( \
+		LE_BITS_CLEARED_TO_1BYTE(__pstart, __bitoffset, __bitlen) | \
+		((((u8)__val) & BIT_LEN_MASK_8(__bitlen)) << (__bitoffset)) \
+	);
+
+/****************************************
+	mem access macro define end
+****************************************/
+
+#define packet_get_type(_packet) (EF1BYTE((_packet).octet[0]) & 0xFC)
+#define RTL_WATCH_DOG_TIME	2000
+#define MSECS(t)		msecs_to_jiffies(t)
+#define WLAN_FC_GET_VERS(fc)	((fc) & IEEE80211_FCTL_VERS)
+#define WLAN_FC_GET_TYPE(fc)	((fc) & IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc)	((fc) & IEEE80211_FCTL_STYPE)
+#define WLAN_FC_MORE_DATA(fc)	((fc) & IEEE80211_FCTL_MOREDATA)
+#define SEQ_TO_SN(seq)		(((seq) & IEEE80211_SCTL_SEQ) >> 4)
+#define SN_TO_SEQ(ssn)		(((ssn) << 4) & IEEE80211_SCTL_SEQ)
+#define MAX_SN			((IEEE80211_SCTL_SEQ) >> 4)
+
+#define	RT_RF_OFF_LEVL_ASPM		BIT(0)	/*PCI ASPM */
+#define	RT_RF_OFF_LEVL_CLK_REQ		BIT(1)	/*PCI clock request */
+#define	RT_RF_OFF_LEVL_PCI_D3		BIT(2)	/*PCI D3 mode */
+/*NIC halt, re-initialize hw parameters*/
+#define	RT_RF_OFF_LEVL_HALT_NIC		BIT(3)
+#define	RT_RF_OFF_LEVL_FREE_FW		BIT(4)	/*FW free, re-download the FW */
+#define	RT_RF_OFF_LEVL_FW_32K		BIT(5)	/*FW in 32k */
+/*Always enable ASPM and Clock Req in initialization.*/
+#define	RT_RF_PS_LEVEL_ALWAYS_ASPM	BIT(6)
+/*When LPS is on, disable 2R if no packet is received or transmittd.*/
+#define	RT_RF_LPS_DISALBE_2R		BIT(30)
+#define	RT_RF_LPS_LEVEL_ASPM		BIT(31)	/*LPS with ASPM */
+#define	RT_IN_PS_LEVEL(ppsc, _ps_flg)		\
+	((ppsc->cur_ps_level & _ps_flg) ? true : false)
+#define	RT_CLEAR_PS_LEVEL(ppsc, _ps_flg)	\
+	(ppsc->cur_ps_level &= (~(_ps_flg)))
+#define	RT_SET_PS_LEVEL(ppsc, _ps_flg)		\
+	(ppsc->cur_ps_level |= _ps_flg)
+
+#define container_of_dwork_rtl(x, y, z) \
+	container_of(container_of(x, struct delayed_work, work), y, z)
+
+#define FILL_OCTET_STRING(_os, _octet, _len)	\
+		(_os).octet = (u8 *)(_octet);		\
+		(_os).length = (_len);
+
+#define CP_MACADDR(des, src)	\
+	((des)[0] = (src)[0], (des)[1] = (src)[1],\
+	(des)[2] = (src)[2], (des)[3] = (src)[3],\
+	(des)[4] = (src)[4], (des)[5] = (src)[5])
+
+static inline u8 rtl_read_byte(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return rtlpriv->io.read8_sync(rtlpriv, addr);
+}
+
+static inline u16 rtl_read_word(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return rtlpriv->io.read16_sync(rtlpriv, addr);
+}
+
+static inline u32 rtl_read_dword(struct rtl_priv *rtlpriv, u32 addr)
+{
+	return rtlpriv->io.read32_sync(rtlpriv, addr);
+}
+
+static inline void rtl_write_byte(struct rtl_priv *rtlpriv, u32 addr, u8 val8)
+{
+	rtlpriv->io.write8_async(rtlpriv, addr, val8);
+}
+
+static inline void rtl_write_word(struct rtl_priv *rtlpriv, u32 addr, u16 val16)
+{
+	rtlpriv->io.write16_async(rtlpriv, addr, val16);
+}
+
+static inline void rtl_write_dword(struct rtl_priv *rtlpriv,
+				   u32 addr, u32 val32)
+{
+	rtlpriv->io.write32_async(rtlpriv, addr, val32);
+}
+
+static inline u32 rtl_get_bbreg(struct ieee80211_hw *hw,
+				u32 regaddr, u32 bitmask)
+{
+	return ((struct rtl_priv *)(hw)->priv)->cfg->ops->get_bbreg(hw,
+								    regaddr,
+								    bitmask);
+}
+
+static inline void rtl_set_bbreg(struct ieee80211_hw *hw, u32 regaddr,
+				 u32 bitmask, u32 data)
+{
+	((struct rtl_priv *)(hw)->priv)->cfg->ops->set_bbreg(hw,
+							     regaddr, bitmask,
+							     data);
+
+}
+
+static inline u32 rtl_get_rfreg(struct ieee80211_hw *hw,
+				enum radio_path rfpath, u32 regaddr,
+				u32 bitmask)
+{
+	return ((struct rtl_priv *)(hw)->priv)->cfg->ops->get_rfreg(hw,
+								    rfpath,
+								    regaddr,
+								    bitmask);
+}
+
+static inline void rtl_set_rfreg(struct ieee80211_hw *hw,
+				 enum radio_path rfpath, u32 regaddr,
+				 u32 bitmask, u32 data)
+{
+	((struct rtl_priv *)(hw)->priv)->cfg->ops->set_rfreg(hw,
+							     rfpath, regaddr,
+							     bitmask, data);
+}
+
+static inline bool is_hal_stop(struct rtl_hal *rtlhal)
+{
+	return (_HAL_STATE_STOP == rtlhal->state);
+}
+
+static inline void set_hal_start(struct rtl_hal *rtlhal)
+{
+	rtlhal->state = _HAL_STATE_START;
+}
+
+static inline void set_hal_stop(struct rtl_hal *rtlhal)
+{
+	rtlhal->state = _HAL_STATE_STOP;
+}
+
+static inline u8 get_rf_type(struct rtl_phy *rtlphy)
+{
+	return rtlphy->rf_type;
+}
+
+#endif
diff --git a/drivers/net/wireless/wl1251/boot.c b/drivers/net/wireless/wl1251/boot.c
index 61572dfa1f6..d729daf8e84 100644
--- a/drivers/net/wireless/wl1251/boot.c
+++ b/drivers/net/wireless/wl1251/boot.c
@@ -19,7 +19,6 @@
  *
  */
 
-#include <linux/gpio.h>
 #include <linux/slab.h>
 
 #include "reg.h"
diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c
index 7a8762553cd..012e1a4016f 100644
--- a/drivers/net/wireless/wl1251/main.c
+++ b/drivers/net/wireless/wl1251/main.c
@@ -52,14 +52,14 @@ void wl1251_disable_interrupts(struct wl1251 *wl)
 	wl->if_ops->disable_irq(wl);
 }
 
-static void wl1251_power_off(struct wl1251 *wl)
+static int wl1251_power_off(struct wl1251 *wl)
 {
-	wl->set_power(false);
+	return wl->if_ops->power(wl, false);
 }
 
-static void wl1251_power_on(struct wl1251 *wl)
+static int wl1251_power_on(struct wl1251 *wl)
 {
-	wl->set_power(true);
+	return wl->if_ops->power(wl, true);
 }
 
 static int wl1251_fetch_firmware(struct wl1251 *wl)
@@ -152,9 +152,12 @@ static void wl1251_fw_wakeup(struct wl1251 *wl)
 
 static int wl1251_chip_wakeup(struct wl1251 *wl)
 {
-	int ret = 0;
+	int ret;
+
+	ret = wl1251_power_on(wl);
+	if (ret < 0)
+		return ret;
 
-	wl1251_power_on(wl);
 	msleep(WL1251_POWER_ON_SLEEP);
 	wl->if_ops->reset(wl);
 
diff --git a/drivers/net/wireless/wl1251/sdio.c b/drivers/net/wireless/wl1251/sdio.c
index 74ba9ced539..d550b5e68d3 100644
--- a/drivers/net/wireless/wl1251/sdio.c
+++ b/drivers/net/wireless/wl1251/sdio.c
@@ -26,6 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/wl12xx.h>
 #include <linux/irq.h>
+#include <linux/pm_runtime.h>
 
 #include "wl1251.h"
 
@@ -42,8 +43,6 @@ struct wl1251_sdio {
 	u32 elp_val;
 };
 
-static struct wl12xx_platform_data *wl12xx_board_data;
-
 static struct sdio_func *wl_to_func(struct wl1251 *wl)
 {
 	struct wl1251_sdio *wl_sdio = wl->if_priv;
@@ -171,8 +170,42 @@ static void wl1251_disable_line_irq(struct wl1251 *wl)
 	return disable_irq(wl->irq);
 }
 
-static void wl1251_sdio_set_power(bool enable)
+static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
 {
+	struct sdio_func *func = wl_to_func(wl);
+	int ret;
+
+	if (enable) {
+		/*
+		 * Power is controlled by runtime PM, but we still call board
+		 * callback in case it wants to do any additional setup,
+		 * for example enabling clock buffer for the module.
+		 */
+		if (wl->set_power)
+			wl->set_power(true);
+
+		ret = pm_runtime_get_sync(&func->dev);
+		if (ret < 0)
+			goto out;
+
+		sdio_claim_host(func);
+		sdio_enable_func(func);
+		sdio_release_host(func);
+	} else {
+		sdio_claim_host(func);
+		sdio_disable_func(func);
+		sdio_release_host(func);
+
+		ret = pm_runtime_put_sync(&func->dev);
+		if (ret < 0)
+			goto out;
+
+		if (wl->set_power)
+			wl->set_power(false);
+	}
+
+out:
+	return ret;
 }
 
 static struct wl1251_if_operations wl1251_sdio_ops = {
@@ -181,30 +214,7 @@ static struct wl1251_if_operations wl1251_sdio_ops = {
 	.write_elp = wl1251_sdio_write_elp,
 	.read_elp = wl1251_sdio_read_elp,
 	.reset = wl1251_sdio_reset,
-};
-
-static int wl1251_platform_probe(struct platform_device *pdev)
-{
-	if (pdev->id != -1) {
-		wl1251_error("can only handle single device");
-		return -ENODEV;
-	}
-
-	wl12xx_board_data = pdev->dev.platform_data;
-	return 0;
-}
-
-/*
- * Dummy platform_driver for passing platform_data to this driver,
- * until we have a way to pass this through SDIO subsystem or
- * some other way.
- */
-static struct platform_driver wl1251_platform_driver = {
-	.driver = {
-		.name	= "wl1251_data",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= wl1251_platform_probe,
+	.power = wl1251_sdio_set_power,
 };
 
 static int wl1251_sdio_probe(struct sdio_func *func,
@@ -214,6 +224,7 @@ static int wl1251_sdio_probe(struct sdio_func *func,
 	struct wl1251 *wl;
 	struct ieee80211_hw *hw;
 	struct wl1251_sdio *wl_sdio;
+	const struct wl12xx_platform_data *wl12xx_board_data;
 
 	hw = wl1251_alloc_hw();
 	if (IS_ERR(hw))
@@ -239,9 +250,9 @@ static int wl1251_sdio_probe(struct sdio_func *func,
 	wl_sdio->func = func;
 	wl->if_priv = wl_sdio;
 	wl->if_ops = &wl1251_sdio_ops;
-	wl->set_power = wl1251_sdio_set_power;
 
-	if (wl12xx_board_data != NULL) {
+	wl12xx_board_data = wl12xx_get_platform_data();
+	if (!IS_ERR(wl12xx_board_data)) {
 		wl->set_power = wl12xx_board_data->set_power;
 		wl->irq = wl12xx_board_data->irq;
 		wl->use_eeprom = wl12xx_board_data->use_eeprom;
@@ -273,6 +284,10 @@ static int wl1251_sdio_probe(struct sdio_func *func,
 		goto out_free_irq;
 
 	sdio_set_drvdata(func, wl);
+
+	/* Tell PM core that we don't need the card to be powered now */
+	pm_runtime_put_noidle(&func->dev);
+
 	return ret;
 
 out_free_irq:
@@ -294,6 +309,9 @@ static void __devexit wl1251_sdio_remove(struct sdio_func *func)
 	struct wl1251 *wl = sdio_get_drvdata(func);
 	struct wl1251_sdio *wl_sdio = wl->if_priv;
 
+	/* Undo decrement done above in wl1251_probe */
+	pm_runtime_get_noresume(&func->dev);
+
 	if (wl->irq)
 		free_irq(wl->irq, wl);
 	kfree(wl_sdio);
@@ -305,23 +323,37 @@ static void __devexit wl1251_sdio_remove(struct sdio_func *func)
 	sdio_release_host(func);
 }
 
+static int wl1251_suspend(struct device *dev)
+{
+	/*
+	 * Tell MMC/SDIO core it's OK to power down the card
+	 * (if it isn't already), but not to remove it completely.
+	 */
+	return 0;
+}
+
+static int wl1251_resume(struct device *dev)
+{
+	return 0;
+}
+
+static const struct dev_pm_ops wl1251_sdio_pm_ops = {
+	.suspend        = wl1251_suspend,
+	.resume         = wl1251_resume,
+};
+
 static struct sdio_driver wl1251_sdio_driver = {
 	.name		= "wl1251_sdio",
 	.id_table	= wl1251_devices,
 	.probe		= wl1251_sdio_probe,
 	.remove		= __devexit_p(wl1251_sdio_remove),
+	.drv.pm		= &wl1251_sdio_pm_ops,
 };
 
 static int __init wl1251_sdio_init(void)
 {
 	int err;
 
-	err = platform_driver_register(&wl1251_platform_driver);
-	if (err) {
-		wl1251_error("failed to register platform driver: %d", err);
-		return err;
-	}
-
 	err = sdio_register_driver(&wl1251_sdio_driver);
 	if (err)
 		wl1251_error("failed to register sdio driver: %d", err);
@@ -331,7 +363,6 @@ static int __init wl1251_sdio_init(void)
 static void __exit wl1251_sdio_exit(void)
 {
 	sdio_unregister_driver(&wl1251_sdio_driver);
-	platform_driver_unregister(&wl1251_platform_driver);
 	wl1251_notice("unloaded");
 }
 
diff --git a/drivers/net/wireless/wl1251/spi.c b/drivers/net/wireless/wl1251/spi.c
index 88fa8e69d0d..ac872b38960 100644
--- a/drivers/net/wireless/wl1251/spi.c
+++ b/drivers/net/wireless/wl1251/spi.c
@@ -215,12 +215,21 @@ static void wl1251_spi_disable_irq(struct wl1251 *wl)
 	return disable_irq(wl->irq);
 }
 
+static int wl1251_spi_set_power(struct wl1251 *wl, bool enable)
+{
+	if (wl->set_power)
+		wl->set_power(enable);
+
+	return 0;
+}
+
 static const struct wl1251_if_operations wl1251_spi_ops = {
 	.read = wl1251_spi_read,
 	.write = wl1251_spi_write,
 	.reset = wl1251_spi_reset_wake,
 	.enable_irq = wl1251_spi_enable_irq,
 	.disable_irq = wl1251_spi_disable_irq,
+	.power = wl1251_spi_set_power,
 };
 
 static int __devinit wl1251_spi_probe(struct spi_device *spi)
diff --git a/drivers/net/wireless/wl1251/wl1251.h b/drivers/net/wireless/wl1251/wl1251.h
index e113d4c1fb3..13fbeeccf60 100644
--- a/drivers/net/wireless/wl1251/wl1251.h
+++ b/drivers/net/wireless/wl1251/wl1251.h
@@ -256,6 +256,7 @@ struct wl1251_if_operations {
 	void (*write)(struct wl1251 *wl, int addr, void *buf, size_t len);
 	void (*read_elp)(struct wl1251 *wl, int addr, u32 *val);
 	void (*write_elp)(struct wl1251 *wl, int addr, u32 val);
+	int  (*power)(struct wl1251 *wl, bool enable);
 	void (*reset)(struct wl1251 *wl);
 	void (*enable_irq)(struct wl1251 *wl);
 	void (*disable_irq)(struct wl1251 *wl);
diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
index b447559f1db..0e65bce457d 100644
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -1,46 +1,68 @@
-menuconfig WL12XX
+menuconfig WL12XX_MENU
 	tristate "TI wl12xx driver support"
 	depends on MAC80211 && EXPERIMENTAL
 	---help---
-	  This will enable TI wl12xx driver support. The drivers make
-	  use of the mac80211 stack.
+	  This will enable TI wl12xx driver support for the following chips:
+	  wl1271 and wl1273.
+	  The drivers make use of the mac80211 stack.
 
-config WL1271
-	tristate "TI wl1271 support"
-	depends on WL12XX && GENERIC_HARDIRQS
+config WL12XX
+	tristate "TI wl12xx support"
+	depends on WL12XX_MENU && GENERIC_HARDIRQS
 	depends on INET
 	select FW_LOADER
 	select CRC7
 	---help---
-	  This module adds support for wireless adapters based on the
-	  TI wl1271 chipset.
+	  This module adds support for wireless adapters based on TI wl1271 and
+	  TI wl1273 chipsets. This module does *not* include support for wl1251.
+	  For wl1251 support, use the separate homonymous driver instead.
 
-	  If you choose to build a module, it'll be called wl1271. Say N if
+	  If you choose to build a module, it will be called wl12xx. Say N if
 	  unsure.
 
-config WL1271_SPI
-	tristate "TI wl1271 SPI support"
-	depends on WL1271 && SPI_MASTER
+config WL12XX_HT
+        bool "TI wl12xx 802.11 HT support (EXPERIMENTAL)"
+        depends on WL12XX && EXPERIMENTAL
+        default n
+        ---help---
+          This will enable 802.11 HT support in the wl12xx module.
+
+	  That configuration is temporary due to the code incomplete and
+	  still in testing process.
+
+config WL12XX_SPI
+	tristate "TI wl12xx SPI support"
+	depends on WL12XX && SPI_MASTER
 	---help---
 	  This module adds support for the SPI interface of adapters using
-	  TI wl1271 chipset.  Select this if your platform is using
+	  TI wl12xx chipsets.  Select this if your platform is using
 	  the SPI bus.
 
-	  If you choose to build a module, it'll be called wl1251_spi.
+	  If you choose to build a module, it'll be called wl12xx_spi.
 	  Say N if unsure.
 
-config WL1271_SDIO
-	tristate "TI wl1271 SDIO support"
-	depends on WL1271 && MMC
+config WL12XX_SDIO
+	tristate "TI wl12xx SDIO support"
+	depends on WL12XX && MMC
 	---help---
 	  This module adds support for the SDIO interface of adapters using
-	  TI wl1271 chipset.  Select this if your platform is using
+	  TI wl12xx chipsets.  Select this if your platform is using
 	  the SDIO bus.
 
-	  If you choose to build a module, it'll be called
-	  wl1271_sdio. Say N if unsure.
+	  If you choose to build a module, it'll be called wl12xx_sdio.
+	  Say N if unsure.
+
+config WL12XX_SDIO_TEST
+	tristate "TI wl12xx SDIO testing support"
+	depends on WL12XX && MMC
+	default n
+	---help---
+	  This module adds support for the SDIO bus testing with the
+	  TI wl12xx chipsets.  You probably don't want this unless you are
+	  testing a new hardware platform.  Select this if you want to test the
+	  SDIO bus which is connected to the wl12xx chip.
 
 config WL12XX_PLATFORM_DATA
 	bool
-	depends on WL1271_SDIO != n
+	depends on WL12XX_SDIO != n || WL1251_SDIO != n
 	default y
diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
index 3a807444b2a..521c0414e52 100644
--- a/drivers/net/wireless/wl12xx/Makefile
+++ b/drivers/net/wireless/wl12xx/Makefile
@@ -1,12 +1,16 @@
-wl1271-objs		= wl1271_main.o  wl1271_cmd.o wl1271_io.o \
-			  wl1271_event.o wl1271_tx.o  wl1271_rx.o   \
-			  wl1271_ps.o    wl1271_acx.o wl1271_boot.o \
-			  wl1271_init.o  wl1271_debugfs.o wl1271_scan.o
-
-wl1271-$(CONFIG_NL80211_TESTMODE)	+= wl1271_testmode.o
-obj-$(CONFIG_WL1271)	+= wl1271.o
-obj-$(CONFIG_WL1271_SPI)	+= wl1271_spi.o
-obj-$(CONFIG_WL1271_SDIO)	+= wl1271_sdio.o
+wl12xx-objs		= main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
+			  boot.o init.o debugfs.o scan.o
+
+wl12xx_spi-objs	= spi.o
+wl12xx_sdio-objs	= sdio.o
+wl12xx_sdio_test-objs = sdio_test.o
+
+wl12xx-$(CONFIG_NL80211_TESTMODE)	+= testmode.o
+obj-$(CONFIG_WL12XX)			+= wl12xx.o
+obj-$(CONFIG_WL12XX_SPI)		+= wl12xx_spi.o
+obj-$(CONFIG_WL12XX_SDIO)		+= wl12xx_sdio.o
+
+obj-$(CONFIG_WL12XX_SDIO_TEST)	+= wl12xx_sdio_test.o
 
 # small builtin driver bit
 obj-$(CONFIG_WL12XX_PLATFORM_DATA)	+= wl12xx_platform_data.o
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/acx.c
index 61899340526..cc4068d2b4a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/acx.c
@@ -21,7 +21,7 @@
  *
  */
 
-#include "wl1271_acx.h"
+#include "acx.h"
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -29,10 +29,10 @@
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
 
-#include "wl1271.h"
+#include "wl12xx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_reg.h"
-#include "wl1271_ps.h"
+#include "reg.h"
+#include "ps.h"
 
 int wl1271_acx_wake_up_conditions(struct wl1271 *wl)
 {
@@ -862,7 +862,7 @@ out:
 	return ret;
 }
 
-int wl1271_acx_frag_threshold(struct wl1271 *wl)
+int wl1271_acx_frag_threshold(struct wl1271 *wl, u16 frag_threshold)
 {
 	struct acx_frag_threshold *acx;
 	int ret = 0;
@@ -876,7 +876,7 @@ int wl1271_acx_frag_threshold(struct wl1271 *wl)
 		goto out;
 	}
 
-	acx->frag_threshold = cpu_to_le16(wl->conf.tx.frag_threshold);
+	acx->frag_threshold = cpu_to_le16(frag_threshold);
 	ret = wl1271_cmd_configure(wl, ACX_FRAG_CFG, acx, sizeof(*acx));
 	if (ret < 0) {
 		wl1271_warning("Setting of frag threshold failed: %d", ret);
@@ -1041,7 +1041,7 @@ out:
 	return ret;
 }
 
-int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, __be32 address)
+int wl1271_acx_arp_ip_filter(struct wl1271 *wl, u8 enable, __be32 address)
 {
 	struct wl1271_acx_arp_filter *acx;
 	int ret;
@@ -1057,7 +1057,7 @@ int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, __be32 address)
 	acx->version = ACX_IPV4_VERSION;
 	acx->enable = enable;
 
-	if (enable == true)
+	if (enable)
 		memcpy(acx->address, &address, ACX_IPV4_ADDR_SIZE);
 
 	ret = wl1271_cmd_configure(wl, ACX_ARP_IP_FILTER,
@@ -1226,6 +1226,89 @@ out:
 	return ret;
 }
 
+int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
+				    struct ieee80211_sta_ht_cap *ht_cap,
+				    bool allow_ht_operation)
+{
+	struct wl1271_acx_ht_capabilities *acx;
+	u8 mac_address[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+	int ret = 0;
+
+	wl1271_debug(DEBUG_ACX, "acx ht capabilities setting");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* Allow HT Operation ? */
+	if (allow_ht_operation) {
+		acx->ht_capabilites =
+			WL1271_ACX_FW_CAP_HT_OPERATION;
+		if (ht_cap->cap & IEEE80211_HT_CAP_GRN_FLD)
+			acx->ht_capabilites |=
+				WL1271_ACX_FW_CAP_GREENFIELD_FRAME_FORMAT;
+		if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)
+			acx->ht_capabilites |=
+				WL1271_ACX_FW_CAP_SHORT_GI_FOR_20MHZ_PACKETS;
+		if (ht_cap->cap & IEEE80211_HT_CAP_LSIG_TXOP_PROT)
+			acx->ht_capabilites |=
+				WL1271_ACX_FW_CAP_LSIG_TXOP_PROTECTION;
+
+		/* get data from A-MPDU parameters field */
+		acx->ampdu_max_length = ht_cap->ampdu_factor;
+		acx->ampdu_min_spacing = ht_cap->ampdu_density;
+
+		memcpy(acx->mac_address, mac_address, ETH_ALEN);
+	} else { /* HT operations are not allowed */
+		acx->ht_capabilites = 0;
+	}
+
+	ret = wl1271_cmd_configure(wl, ACX_PEER_HT_CAP, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx ht capabilities setting failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1271_acx_set_ht_information(struct wl1271 *wl,
+				   u16 ht_operation_mode)
+{
+	struct wl1271_acx_ht_information *acx;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_ACX, "acx ht information setting");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->ht_protection =
+		(u8)(ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION);
+	acx->rifs_mode = 0;
+	acx->gf_protection = 0;
+	acx->ht_tx_burst_limit = 0;
+	acx->dual_cts_protection = 0;
+
+	ret = wl1271_cmd_configure(wl, ACX_HT_BSS_OPERATION, acx, sizeof(*acx));
+
+	if (ret < 0) {
+		wl1271_warning("acx ht information setting failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
 int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime)
 {
 	struct wl1271_acx_fw_tsf_information *tsf_info;
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/acx.h
index ebb341d36e8..9cbc3f40c8d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/acx.h
@@ -22,11 +22,11 @@
  *
  */
 
-#ifndef __WL1271_ACX_H__
-#define __WL1271_ACX_H__
+#ifndef __ACX_H__
+#define __ACX_H__
 
-#include "wl1271.h"
-#include "wl1271_cmd.h"
+#include "wl12xx.h"
+#include "cmd.h"
 
 /*************************************************************************
 
@@ -61,7 +61,8 @@
 					    WL1271_ACX_INTR_HW_AVAILABLE  | \
 					    WL1271_ACX_INTR_DATA)
 
-#define WL1271_INTR_MASK                   (WL1271_ACX_INTR_EVENT_A      | \
+#define WL1271_INTR_MASK                   (WL1271_ACX_INTR_WATCHDOG     | \
+					    WL1271_ACX_INTR_EVENT_A      | \
 					    WL1271_ACX_INTR_EVENT_B      | \
 					    WL1271_ACX_INTR_HW_AVAILABLE | \
 					    WL1271_ACX_INTR_DATA)
@@ -867,10 +868,15 @@ struct wl1271_acx_bet_enable {
 #define ACX_IPV4_VERSION 4
 #define ACX_IPV6_VERSION 6
 #define ACX_IPV4_ADDR_SIZE 4
+
+/* bitmap of enabled arp_filter features */
+#define ACX_ARP_FILTER_ARP_FILTERING	BIT(0)
+#define ACX_ARP_FILTER_AUTO_ARP		BIT(1)
+
 struct wl1271_acx_arp_filter {
 	struct acx_header header;
 	u8 version;         /* ACX_IPV4_VERSION, ACX_IPV6_VERSION */
-	u8 enable;          /* 1 to enable ARP filtering, 0 to disable */
+	u8 enable;          /* bitmap of enabled ARP filtering features */
 	u8 padding[2];
 	u8 address[16];     /* The configured device IP address - all ARP
 			       requests directed to this IP address will pass
@@ -964,6 +970,87 @@ struct wl1271_acx_rssi_snr_avg_weights {
 	u8 snr_data;
 };
 
+/*
+ * ACX_PEER_HT_CAP
+ * Configure HT capabilities - declare the capabilities of the peer
+ * we are connected to.
+ */
+struct wl1271_acx_ht_capabilities {
+	struct acx_header header;
+
+	/*
+	 * bit 0 - Allow HT Operation
+	 * bit 1 - Allow Greenfield format in TX
+	 * bit 2 - Allow Short GI in TX
+	 * bit 3 - Allow L-SIG TXOP Protection in TX
+	 * bit 4 - Allow HT Control fields in TX.
+	 *         Note, driver will still leave space for HT control in packets
+	 *         regardless of the value of this field. FW will be responsible
+	 *         to drop the HT field from any frame when this Bit set to 0.
+	 * bit 5 - Allow RD initiation in TXOP. FW is allowed to initate RD.
+	 *         Exact policy setting for this feature is TBD.
+	 *         Note, this bit can only be set to 1 if bit 3 is set to 1.
+	 */
+	__le32 ht_capabilites;
+
+	/*
+	 * Indicates to which peer these capabilities apply.
+	 * For infrastructure use ff:ff:ff:ff:ff:ff that indicates relevance
+	 * for all peers.
+	 * Only valid for IBSS/DLS operation.
+	 */
+	u8 mac_address[ETH_ALEN];
+
+	/*
+	 * This the maximum A-MPDU length supported by the AP. The FW may not
+	 * exceed this length when sending A-MPDUs
+	 */
+	u8 ampdu_max_length;
+
+	/* This is the minimal spacing required when sending A-MPDUs to the AP*/
+	u8 ampdu_min_spacing;
+} __packed;
+
+/* HT Capabilites Fw Bit Mask Mapping */
+#define WL1271_ACX_FW_CAP_HT_OPERATION                 BIT(0)
+#define WL1271_ACX_FW_CAP_GREENFIELD_FRAME_FORMAT      BIT(1)
+#define WL1271_ACX_FW_CAP_SHORT_GI_FOR_20MHZ_PACKETS   BIT(2)
+#define WL1271_ACX_FW_CAP_LSIG_TXOP_PROTECTION         BIT(3)
+#define WL1271_ACX_FW_CAP_HT_CONTROL_FIELDS            BIT(4)
+#define WL1271_ACX_FW_CAP_RD_INITIATION                BIT(5)
+
+
+/*
+ * ACX_HT_BSS_OPERATION
+ * Configure HT capabilities - AP rules for behavior in the BSS.
+ */
+struct wl1271_acx_ht_information {
+	struct acx_header header;
+
+	/* Values: 0 - RIFS not allowed, 1 - RIFS allowed */
+	u8 rifs_mode;
+
+	/* Values: 0 - 3 like in spec */
+	u8 ht_protection;
+
+	/* Values: 0 - GF protection not required, 1 - GF protection required */
+	u8 gf_protection;
+
+	/*Values: 0 - TX Burst limit not required, 1 - TX Burst Limit required*/
+	u8 ht_tx_burst_limit;
+
+	/*
+	 * Values: 0 - Dual CTS protection not required,
+	 *         1 - Dual CTS Protection required
+	 * Note: When this value is set to 1 FW will protect all TXOP with RTS
+	 * frame and will not use CTS-to-self regardless of the value of the
+	 * ACX_CTS_PROTECTION information element
+	 */
+	u8 dual_cts_protection;
+
+	u8 padding[3];
+} __packed;
+
 struct wl1271_acx_fw_tsf_information {
 	struct acx_header header;
 
@@ -1079,20 +1166,25 @@ int wl1271_acx_ac_cfg(struct wl1271 *wl, u8 ac, u8 cw_min, u16 cw_max,
 int wl1271_acx_tid_cfg(struct wl1271 *wl, u8 queue_id, u8 channel_type,
 		       u8 tsid, u8 ps_scheme, u8 ack_policy,
 		       u32 apsd_conf0, u32 apsd_conf1);
-int wl1271_acx_frag_threshold(struct wl1271 *wl);
+int wl1271_acx_frag_threshold(struct wl1271 *wl, u16 frag_threshold);
 int wl1271_acx_tx_config_options(struct wl1271 *wl);
 int wl1271_acx_mem_cfg(struct wl1271 *wl);
 int wl1271_acx_init_mem_config(struct wl1271 *wl);
 int wl1271_acx_init_rx_interrupt(struct wl1271 *wl);
 int wl1271_acx_smart_reflex(struct wl1271 *wl);
 int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable);
-int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, __be32 address);
+int wl1271_acx_arp_ip_filter(struct wl1271 *wl, u8 enable, __be32 address);
 int wl1271_acx_pm_config(struct wl1271 *wl);
 int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable);
 int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid);
 int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable,
 				s16 thold, u8 hyst);
 int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl);
+int wl1271_acx_set_ht_capabilities(struct wl1271 *wl,
+				    struct ieee80211_sta_ht_cap *ht_cap,
+				    bool allow_ht_operation);
+int wl1271_acx_set_ht_information(struct wl1271 *wl,
+				   u16 ht_operation_mode);
 int wl1271_acx_tsf_info(struct wl1271 *wl, u64 *mactime);
 
 #endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/boot.c
index b9102124209..4df04f84d7f 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -21,14 +21,13 @@
  *
  */
 
-#include <linux/gpio.h>
 #include <linux/slab.h>
 
-#include "wl1271_acx.h"
-#include "wl1271_reg.h"
-#include "wl1271_boot.h"
-#include "wl1271_io.h"
-#include "wl1271_event.h"
+#include "acx.h"
+#include "reg.h"
+#include "boot.h"
+#include "io.h"
+#include "event.h"
 
 static struct wl1271_partition_set part_table[PART_TABLE_LEN] = {
 	[PART_DOWN] = {
@@ -467,24 +466,24 @@ static void wl1271_boot_hw_version(struct wl1271 *wl)
 	wl->hw_pg_ver = (s8)fuse;
 }
 
-int wl1271_boot(struct wl1271 *wl)
+/* uploads NVS and firmware */
+int wl1271_load_firmware(struct wl1271 *wl)
 {
 	int ret = 0;
 	u32 tmp, clk, pause;
-	int ref_clock = wl->ref_clock;
 
 	wl1271_boot_hw_version(wl);
 
-	if (ref_clock == 0 || ref_clock == 2 || ref_clock == 4)
+	if (wl->ref_clock == 0 || wl->ref_clock == 2 || wl->ref_clock == 4)
 		/* ref clk: 19.2/38.4/38.4-XTAL */
 		clk = 0x3;
-	else if (ref_clock == 1 || ref_clock == 3)
+	else if (wl->ref_clock == 1 || wl->ref_clock == 3)
 		/* ref clk: 26/52 */
 		clk = 0x5;
 	else
 		return -EINVAL;
 
-	if (ref_clock != 0) {
+	if (wl->ref_clock != 0) {
 		u16 val;
 		/* Set clock type (open drain) */
 		val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
@@ -529,8 +528,7 @@ int wl1271_boot(struct wl1271 *wl)
 
 	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
 
-	/* 2 */
-	clk |= (ref_clock << 1) << 4;
+	clk |= (wl->ref_clock << 1) << 4;
 	wl1271_write32(wl, DRPW_SCRATCH_START, clk);
 
 	wl1271_set_partition(wl, &part_table[PART_WORK]);
@@ -574,6 +572,20 @@ int wl1271_boot(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
+out:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wl1271_load_firmware);
+
+int wl1271_boot(struct wl1271 *wl)
+{
+	int ret;
+
+	/* upload NVS and firmware */
+	ret = wl1271_load_firmware(wl);
+	if (ret)
+		return ret;
+
 	/* 10.5 start firmware */
 	ret = wl1271_boot_run_firmware(wl);
 	if (ret < 0)
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.h b/drivers/net/wireless/wl12xx/boot.h
index f73b0b15a28..d67dcffa31e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.h
+++ b/drivers/net/wireless/wl12xx/boot.h
@@ -24,9 +24,10 @@
 #ifndef __BOOT_H__
 #define __BOOT_H__
 
-#include "wl1271.h"
+#include "wl12xx.h"
 
 int wl1271_boot(struct wl1271 *wl);
+int wl1271_load_firmware(struct wl1271 *wl);
 
 #define WL1271_NO_SUBBANDS 8
 #define WL1271_NO_POWER_LEVELS 4
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 5d3e8485ea4..0106628aa5a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -29,13 +29,13 @@
 #include <linux/ieee80211.h>
 #include <linux/slab.h>
 
-#include "wl1271.h"
-#include "wl1271_reg.h"
-#include "wl1271_io.h"
-#include "wl1271_acx.h"
+#include "wl12xx.h"
+#include "reg.h"
+#include "io.h"
+#include "acx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_cmd.h"
-#include "wl1271_event.h"
+#include "cmd.h"
+#include "event.h"
 
 #define WL1271_CMD_FAST_POLL_COUNT       50
 
@@ -611,6 +611,75 @@ out:
 	return ret;
 }
 
+struct sk_buff *wl1271_cmd_build_ap_probe_req(struct wl1271 *wl,
+					      struct sk_buff *skb)
+{
+	int ret;
+
+	if (!skb)
+		skb = ieee80211_ap_probereq_get(wl->hw, wl->vif);
+	if (!skb)
+		goto out;
+
+	wl1271_dump(DEBUG_SCAN, "AP PROBE REQ: ", skb->data, skb->len);
+
+	if (wl->band == IEEE80211_BAND_2GHZ)
+		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
+					      skb->data, skb->len, 0,
+					      wl->conf.tx.basic_rate);
+	else
+		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
+					      skb->data, skb->len, 0,
+					      wl->conf.tx.basic_rate_5);
+
+	if (ret < 0)
+		wl1271_error("Unable to set ap probe request template.");
+
+out:
+	return skb;
+}
+
+int wl1271_cmd_build_arp_rsp(struct wl1271 *wl, __be32 ip_addr)
+{
+	int ret;
+	struct wl12xx_arp_rsp_template tmpl;
+	struct ieee80211_hdr_3addr *hdr;
+	struct arphdr *arp_hdr;
+
+	memset(&tmpl, 0, sizeof(tmpl));
+
+	/* mac80211 header */
+	hdr = &tmpl.hdr;
+	hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
+					 IEEE80211_STYPE_DATA |
+					 IEEE80211_FCTL_TODS);
+	memcpy(hdr->addr1, wl->vif->bss_conf.bssid, ETH_ALEN);
+	memcpy(hdr->addr2, wl->vif->addr, ETH_ALEN);
+	memset(hdr->addr3, 0xff, ETH_ALEN);
+
+	/* llc layer */
+	memcpy(tmpl.llc_hdr, rfc1042_header, sizeof(rfc1042_header));
+	tmpl.llc_type = htons(ETH_P_ARP);
+
+	/* arp header */
+	arp_hdr = &tmpl.arp_hdr;
+	arp_hdr->ar_hrd = htons(ARPHRD_ETHER);
+	arp_hdr->ar_pro = htons(ETH_P_IP);
+	arp_hdr->ar_hln = ETH_ALEN;
+	arp_hdr->ar_pln = 4;
+	arp_hdr->ar_op = htons(ARPOP_REPLY);
+
+	/* arp payload */
+	memcpy(tmpl.sender_hw, wl->vif->addr, ETH_ALEN);
+	tmpl.sender_ip = ip_addr;
+
+	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_ARP_RSP,
+				      &tmpl, sizeof(tmpl), 0,
+				      wl->basic_rate);
+
+	return ret;
+}
+
 int wl1271_build_qos_null_data(struct wl1271 *wl)
 {
 	struct ieee80211_qos_hdr template;
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/cmd.h
index a0caf4fc37b..2a1d9db7ceb 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/cmd.h
@@ -22,10 +22,10 @@
  *
  */
 
-#ifndef __WL1271_CMD_H__
-#define __WL1271_CMD_H__
+#ifndef __CMD_H__
+#define __CMD_H__
 
-#include "wl1271.h"
+#include "wl12xx.h"
 
 struct acx_header;
 
@@ -49,6 +49,9 @@ int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid);
 int wl1271_cmd_build_probe_req(struct wl1271 *wl,
 			       const u8 *ssid, size_t ssid_len,
 			       const u8 *ie, size_t ie_len, u8 band);
+struct sk_buff *wl1271_cmd_build_ap_probe_req(struct wl1271 *wl,
+					      struct sk_buff *skb);
+int wl1271_cmd_build_arp_rsp(struct wl1271 *wl, __be32 ip_addr);
 int wl1271_build_qos_null_data(struct wl1271 *wl);
 int wl1271_cmd_build_klv_null_data(struct wl1271 *wl);
 int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id);
@@ -122,6 +125,7 @@ enum cmd_templ {
 	CMD_TEMPL_CTS,           /*
 				  * For CTS-to-self (FastCTS) mechanism
 				  * for BT/WLAN coexistence (SoftGemini). */
+	CMD_TEMPL_ARP_RSP,
 	CMD_TEMPL_MAX = 0xff
 };
 
@@ -327,9 +331,6 @@ enum wl1271_channel_tune_bands {
 
 #define WL1271_PD_REFERENCE_POINT_BAND_B_G  0
 
-#define TEST_CMD_P2G_CAL                    0x02
-#define TEST_CMD_CHANNEL_TUNE               0x0d
-#define TEST_CMD_UPDATE_PD_REFERENCE_POINT  0x1d
 #define TEST_CMD_INI_FILE_RADIO_PARAM       0x19
 #define TEST_CMD_INI_FILE_GENERAL_PARAM     0x1E
 #define TEST_CMD_INI_FILE_RF_EXTENDED_PARAM 0x26
@@ -375,51 +376,6 @@ struct wl1271_ext_radio_parms_cmd {
 	u8 padding[3];
 } __packed;
 
-struct wl1271_cmd_cal_channel_tune {
-	struct wl1271_cmd_header header;
-
-	struct wl1271_cmd_test_header test;
-
-	u8 band;
-	u8 channel;
-
-	__le16 radio_status;
-} __packed;
-
-struct wl1271_cmd_cal_update_ref_point {
-	struct wl1271_cmd_header header;
-
-	struct wl1271_cmd_test_header test;
-
-	__le32 ref_power;
-	__le32 ref_detector;
-	u8  sub_band;
-	u8  padding[3];
-} __packed;
-
-#define MAX_TLV_LENGTH         400
-#define	MAX_NVS_VERSION_LENGTH 12
-
-#define WL1271_CAL_P2G_BAND_B_G BIT(0)
-
-struct wl1271_cmd_cal_p2g {
-	struct wl1271_cmd_header header;
-
-	struct wl1271_cmd_test_header test;
-
-	__le16 len;
-	u8  buf[MAX_TLV_LENGTH];
-	u8  type;
-	u8  padding;
-
-	__le16 radio_status;
-	u8  nvs_version[MAX_NVS_VERSION_LENGTH];
-
-	u8  sub_band_mask;
-	u8  padding2;
-} __packed;
-
-
 /*
  * There are three types of disconnections:
  *
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/conf.h
index 5f78a6cb143..a16b3616e43 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -21,8 +21,8 @@
  *
  */
 
-#ifndef __WL1271_CONF_H__
-#define __WL1271_CONF_H__
+#ifndef __CONF_H__
+#define __CONF_H__
 
 enum {
 	CONF_HW_BIT_RATE_1MBPS   = BIT(0),
diff --git a/drivers/net/wireless/wl12xx/debugfs.c b/drivers/net/wireless/wl12xx/debugfs.c
new file mode 100644
index 00000000000..ec607776015
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/debugfs.c
@@ -0,0 +1,480 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "debugfs.h"
+
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+
+#include "wl12xx.h"
+#include "acx.h"
+#include "ps.h"
+#include "io.h"
+
+/* ms */
+#define WL1271_DEBUGFS_STATS_LIFETIME 1000
+
+/* debugfs macros idea from mac80211 */
+#define DEBUGFS_FORMAT_BUFFER_SIZE 100
+static int wl1271_format_buffer(char __user *userbuf, size_t count,
+				    loff_t *ppos, char *fmt, ...)
+{
+	va_list args;
+	char buf[DEBUGFS_FORMAT_BUFFER_SIZE];
+	int res;
+
+	va_start(args, fmt);
+	res = vscnprintf(buf, sizeof(buf), fmt, args);
+	va_end(args);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+
+#define DEBUGFS_READONLY_FILE(name, fmt, value...)			\
+static ssize_t name## _read(struct file *file, char __user *userbuf,	\
+			    size_t count, loff_t *ppos)			\
+{									\
+	struct wl1271 *wl = file->private_data;				\
+	return wl1271_format_buffer(userbuf, count, ppos,		\
+				    fmt "\n", ##value);			\
+}									\
+									\
+static const struct file_operations name## _ops = {			\
+	.read = name## _read,						\
+	.open = wl1271_open_file_generic,				\
+	.llseek	= generic_file_llseek,					\
+};
+
+#define DEBUGFS_ADD(name, parent)					\
+	entry = debugfs_create_file(#name, 0400, parent,		\
+				    wl, &name## _ops);			\
+	if (!entry || IS_ERR(entry))					\
+		goto err;						\
+
+#define DEBUGFS_FWSTATS_FILE(sub, name, fmt)				\
+static ssize_t sub## _ ##name## _read(struct file *file,		\
+				      char __user *userbuf,		\
+				      size_t count, loff_t *ppos)	\
+{									\
+	struct wl1271 *wl = file->private_data;				\
+									\
+	wl1271_debugfs_update_stats(wl);				\
+									\
+	return wl1271_format_buffer(userbuf, count, ppos, fmt "\n",	\
+				    wl->stats.fw_stats->sub.name);	\
+}									\
+									\
+static const struct file_operations sub## _ ##name## _ops = {		\
+	.read = sub## _ ##name## _read,					\
+	.open = wl1271_open_file_generic,				\
+	.llseek	= generic_file_llseek,					\
+};
+
+#define DEBUGFS_FWSTATS_ADD(sub, name)				\
+	DEBUGFS_ADD(sub## _ ##name, stats)
+
+static void wl1271_debugfs_update_stats(struct wl1271 *wl)
+{
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	ret = wl1271_ps_elp_wakeup(wl, false);
+	if (ret < 0)
+		goto out;
+
+	if (wl->state == WL1271_STATE_ON &&
+	    time_after(jiffies, wl->stats.fw_stats_update +
+		       msecs_to_jiffies(WL1271_DEBUGFS_STATS_LIFETIME))) {
+		wl1271_acx_statistics(wl, wl->stats.fw_stats);
+		wl->stats.fw_stats_update = jiffies;
+	}
+
+	wl1271_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+static int wl1271_open_file_generic(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, "%u");
+
+DEBUGFS_FWSTATS_FILE(rx, out_of_mem, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, "%u");
+DEBUGFS_FWSTATS_FILE(rx, hw_stuck, "%u");
+DEBUGFS_FWSTATS_FILE(rx, dropped, "%u");
+DEBUGFS_FWSTATS_FILE(rx, fcs_err, "%u");
+DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, "%u");
+DEBUGFS_FWSTATS_FILE(rx, path_reset, "%u");
+DEBUGFS_FWSTATS_FILE(rx, reset_counter, "%u");
+
+DEBUGFS_FWSTATS_FILE(dma, rx_requested, "%u");
+DEBUGFS_FWSTATS_FILE(dma, rx_errors, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_requested, "%u");
+DEBUGFS_FWSTATS_FILE(dma, tx_errors, "%u");
+
+DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, "%u");
+DEBUGFS_FWSTATS_FILE(isr, fiqs, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_headers, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_rdys, "%u");
+DEBUGFS_FWSTATS_FILE(isr, irqs, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_procs, "%u");
+DEBUGFS_FWSTATS_FILE(isr, decrypt_done, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma0_done, "%u");
+DEBUGFS_FWSTATS_FILE(isr, dma1_done, "%u");
+DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, "%u");
+DEBUGFS_FWSTATS_FILE(isr, commands, "%u");
+DEBUGFS_FWSTATS_FILE(isr, rx_procs, "%u");
+DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, "%u");
+DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, "%u");
+DEBUGFS_FWSTATS_FILE(isr, pci_pm, "%u");
+DEBUGFS_FWSTATS_FILE(isr, wakeups, "%u");
+DEBUGFS_FWSTATS_FILE(isr, low_rssi, "%u");
+
+DEBUGFS_FWSTATS_FILE(wep, addr_key_count, "%u");
+DEBUGFS_FWSTATS_FILE(wep, default_key_count, "%u");
+/* skipping wep.reserved */
+DEBUGFS_FWSTATS_FILE(wep, key_not_found, "%u");
+DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, "%u");
+DEBUGFS_FWSTATS_FILE(wep, packets, "%u");
+DEBUGFS_FWSTATS_FILE(wep, interrupt, "%u");
+
+DEBUGFS_FWSTATS_FILE(pwr, ps_enter, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, elp_enter, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, power_save_off, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, enable_ps, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, disable_ps, "%u");
+DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, "%u");
+/* skipping cont_miss_bcns_spread for now */
+DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, "%u");
+
+DEBUGFS_FWSTATS_FILE(mic, rx_pkts, "%u");
+DEBUGFS_FWSTATS_FILE(mic, calc_failure, "%u");
+
+DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, "%u");
+DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, "%u");
+DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, "%u");
+
+DEBUGFS_FWSTATS_FILE(event, heart_beat, "%u");
+DEBUGFS_FWSTATS_FILE(event, calibration, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mismatch, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, "%u");
+DEBUGFS_FWSTATS_FILE(event, rx_pool, "%u");
+DEBUGFS_FWSTATS_FILE(event, oom_late, "%u");
+DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, "%u");
+DEBUGFS_FWSTATS_FILE(event, tx_stuck, "%u");
+
+DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, "%u");
+DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, "%u");
+DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, "%u");
+
+DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, "%u");
+DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, "%u");
+
+DEBUGFS_READONLY_FILE(retry_count, "%u", wl->stats.retry_count);
+DEBUGFS_READONLY_FILE(excessive_retries, "%u",
+		      wl->stats.excessive_retries);
+
+static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf,
+				 size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	u32 queue_len;
+	char buf[20];
+	int res;
+
+	queue_len = wl->tx_queue_count;
+
+	res = scnprintf(buf, sizeof(buf), "%u\n", queue_len);
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+
+static const struct file_operations tx_queue_len_ops = {
+	.read = tx_queue_len_read,
+	.open = wl1271_open_file_generic,
+	.llseek = default_llseek,
+};
+
+static ssize_t gpio_power_read(struct file *file, char __user *user_buf,
+			  size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	bool state = test_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
+
+	int res;
+	char buf[10];
+
+	res = scnprintf(buf, sizeof(buf), "%d\n", state);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+}
+
+static ssize_t gpio_power_write(struct file *file,
+			   const char __user *user_buf,
+			   size_t count, loff_t *ppos)
+{
+	struct wl1271 *wl = file->private_data;
+	char buf[10];
+	size_t len;
+	unsigned long value;
+	int ret;
+
+	mutex_lock(&wl->mutex);
+
+	len = min(count, sizeof(buf) - 1);
+	if (copy_from_user(buf, user_buf, len)) {
+		ret = -EFAULT;
+		goto out;
+	}
+	buf[len] = '\0';
+
+	ret = strict_strtoul(buf, 0, &value);
+	if (ret < 0) {
+		wl1271_warning("illegal value in gpio_power");
+		goto out;
+	}
+
+	if (value)
+		wl1271_power_on(wl);
+	else
+		wl1271_power_off(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+	return count;
+}
+
+static const struct file_operations gpio_power_ops = {
+	.read = gpio_power_read,
+	.write = gpio_power_write,
+	.open = wl1271_open_file_generic,
+	.llseek = default_llseek,
+};
+
+static int wl1271_debugfs_add_files(struct wl1271 *wl)
+{
+	int ret = 0;
+	struct dentry *entry, *stats;
+
+	stats = debugfs_create_dir("fw-statistics", wl->rootdir);
+	if (!stats || IS_ERR(stats)) {
+		entry = stats;
+		goto err;
+	}
+
+	DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow);
+
+	DEBUGFS_FWSTATS_ADD(rx, out_of_mem);
+	DEBUGFS_FWSTATS_ADD(rx, hdr_overflow);
+	DEBUGFS_FWSTATS_ADD(rx, hw_stuck);
+	DEBUGFS_FWSTATS_ADD(rx, dropped);
+	DEBUGFS_FWSTATS_ADD(rx, fcs_err);
+	DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig);
+	DEBUGFS_FWSTATS_ADD(rx, path_reset);
+	DEBUGFS_FWSTATS_ADD(rx, reset_counter);
+
+	DEBUGFS_FWSTATS_ADD(dma, rx_requested);
+	DEBUGFS_FWSTATS_ADD(dma, rx_errors);
+	DEBUGFS_FWSTATS_ADD(dma, tx_requested);
+	DEBUGFS_FWSTATS_ADD(dma, tx_errors);
+
+	DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt);
+	DEBUGFS_FWSTATS_ADD(isr, fiqs);
+	DEBUGFS_FWSTATS_ADD(isr, rx_headers);
+	DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow);
+	DEBUGFS_FWSTATS_ADD(isr, rx_rdys);
+	DEBUGFS_FWSTATS_ADD(isr, irqs);
+	DEBUGFS_FWSTATS_ADD(isr, tx_procs);
+	DEBUGFS_FWSTATS_ADD(isr, decrypt_done);
+	DEBUGFS_FWSTATS_ADD(isr, dma0_done);
+	DEBUGFS_FWSTATS_ADD(isr, dma1_done);
+	DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete);
+	DEBUGFS_FWSTATS_ADD(isr, commands);
+	DEBUGFS_FWSTATS_ADD(isr, rx_procs);
+	DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes);
+	DEBUGFS_FWSTATS_ADD(isr, host_acknowledges);
+	DEBUGFS_FWSTATS_ADD(isr, pci_pm);
+	DEBUGFS_FWSTATS_ADD(isr, wakeups);
+	DEBUGFS_FWSTATS_ADD(isr, low_rssi);
+
+	DEBUGFS_FWSTATS_ADD(wep, addr_key_count);
+	DEBUGFS_FWSTATS_ADD(wep, default_key_count);
+	/* skipping wep.reserved */
+	DEBUGFS_FWSTATS_ADD(wep, key_not_found);
+	DEBUGFS_FWSTATS_ADD(wep, decrypt_fail);
+	DEBUGFS_FWSTATS_ADD(wep, packets);
+	DEBUGFS_FWSTATS_ADD(wep, interrupt);
+
+	DEBUGFS_FWSTATS_ADD(pwr, ps_enter);
+	DEBUGFS_FWSTATS_ADD(pwr, elp_enter);
+	DEBUGFS_FWSTATS_ADD(pwr, missing_bcns);
+	DEBUGFS_FWSTATS_ADD(pwr, wake_on_host);
+	DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp);
+	DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons);
+	DEBUGFS_FWSTATS_ADD(pwr, power_save_off);
+	DEBUGFS_FWSTATS_ADD(pwr, enable_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, disable_ps);
+	DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps);
+	/* skipping cont_miss_bcns_spread for now */
+	DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons);
+
+	DEBUGFS_FWSTATS_ADD(mic, rx_pkts);
+	DEBUGFS_FWSTATS_ADD(mic, calc_failure);
+
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_fail);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_fail);
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_packets);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_packets);
+	DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt);
+	DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt);
+
+	DEBUGFS_FWSTATS_ADD(event, heart_beat);
+	DEBUGFS_FWSTATS_ADD(event, calibration);
+	DEBUGFS_FWSTATS_ADD(event, rx_mismatch);
+	DEBUGFS_FWSTATS_ADD(event, rx_mem_empty);
+	DEBUGFS_FWSTATS_ADD(event, rx_pool);
+	DEBUGFS_FWSTATS_ADD(event, oom_late);
+	DEBUGFS_FWSTATS_ADD(event, phy_transmit_error);
+	DEBUGFS_FWSTATS_ADD(event, tx_stuck);
+
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn);
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn);
+	DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization);
+	DEBUGFS_FWSTATS_ADD(ps, upsd_utilization);
+
+	DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop);
+	DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data);
+	DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
+
+	DEBUGFS_ADD(tx_queue_len, wl->rootdir);
+	DEBUGFS_ADD(retry_count, wl->rootdir);
+	DEBUGFS_ADD(excessive_retries, wl->rootdir);
+
+	DEBUGFS_ADD(gpio_power, wl->rootdir);
+
+	entry = debugfs_create_x32("debug_level", 0600, wl->rootdir,
+				   &wl12xx_debug_level);
+	if (!entry || IS_ERR(entry))
+		goto err;
+
+	return 0;
+
+err:
+	if (IS_ERR(entry))
+		ret = PTR_ERR(entry);
+	else
+		ret = -ENOMEM;
+
+	return ret;
+}
+
+void wl1271_debugfs_reset(struct wl1271 *wl)
+{
+	if (!wl->rootdir)
+		return;
+
+	memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
+	wl->stats.retry_count = 0;
+	wl->stats.excessive_retries = 0;
+}
+
+int wl1271_debugfs_init(struct wl1271 *wl)
+{
+	int ret;
+
+	wl->rootdir = debugfs_create_dir(KBUILD_MODNAME,
+					 wl->hw->wiphy->debugfsdir);
+
+	if (IS_ERR(wl->rootdir)) {
+		ret = PTR_ERR(wl->rootdir);
+		wl->rootdir = NULL;
+		goto err;
+	}
+
+	wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats),
+				      GFP_KERNEL);
+
+	if (!wl->stats.fw_stats) {
+		ret = -ENOMEM;
+		goto err_fw;
+	}
+
+	wl->stats.fw_stats_update = jiffies;
+
+	ret = wl1271_debugfs_add_files(wl);
+
+	if (ret < 0)
+		goto err_file;
+
+	return 0;
+
+err_file:
+	kfree(wl->stats.fw_stats);
+	wl->stats.fw_stats = NULL;
+
+err_fw:
+	debugfs_remove_recursive(wl->rootdir);
+	wl->rootdir = NULL;
+
+err:
+	return ret;
+}
+
+void wl1271_debugfs_exit(struct wl1271 *wl)
+{
+	kfree(wl->stats.fw_stats);
+	wl->stats.fw_stats = NULL;
+
+	debugfs_remove_recursive(wl->rootdir);
+	wl->rootdir = NULL;
+
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.h b/drivers/net/wireless/wl12xx/debugfs.h
index 00a45b2669a..254c5b292cf 100644
--- a/drivers/net/wireless/wl12xx/wl1271_debugfs.h
+++ b/drivers/net/wireless/wl12xx/debugfs.h
@@ -21,10 +21,10 @@
  *
  */
 
-#ifndef WL1271_DEBUGFS_H
-#define WL1271_DEBUGFS_H
+#ifndef __DEBUGFS_H__
+#define __DEBUGFS_H__
 
-#include "wl1271.h"
+#include "wl12xx.h"
 
 int wl1271_debugfs_init(struct wl1271 *wl);
 void wl1271_debugfs_exit(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/event.c
index 7b3f5038296..f9146f5242f 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/event.c
@@ -21,12 +21,12 @@
  *
  */
 
-#include "wl1271.h"
-#include "wl1271_reg.h"
-#include "wl1271_io.h"
-#include "wl1271_event.h"
-#include "wl1271_ps.h"
-#include "wl1271_scan.h"
+#include "wl12xx.h"
+#include "reg.h"
+#include "io.h"
+#include "event.h"
+#include "ps.h"
+#include "scan.h"
 #include "wl12xx_80211.h"
 
 void wl1271_pspoll_work(struct work_struct *work)
@@ -134,8 +134,6 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 
 		/* go to extremely low power mode */
 		wl1271_ps_elp_sleep(wl);
-		if (ret < 0)
-			break;
 		break;
 	case EVENT_EXIT_POWER_SAVE_FAIL:
 		wl1271_debug(DEBUG_PSM, "PSM exit failed");
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.h b/drivers/net/wireless/wl12xx/event.h
index e4751667cf5..6cce0143adb 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.h
+++ b/drivers/net/wireless/wl12xx/event.h
@@ -22,8 +22,8 @@
  *
  */
 
-#ifndef __WL1271_EVENT_H__
-#define __WL1271_EVENT_H__
+#ifndef __EVENT_H__
+#define __EVENT_H__
 
 /*
  * Mbox events
diff --git a/drivers/net/wireless/wl12xx/wl1271_ini.h b/drivers/net/wireless/wl12xx/ini.h
index 2313047d401..c330a2583df 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ini.h
+++ b/drivers/net/wireless/wl12xx/ini.h
@@ -21,8 +21,8 @@
  *
  */
 
-#ifndef __WL1271_INI_H__
-#define __WL1271_INI_H__
+#ifndef __INI_H__
+#define __INI_H__
 
 #define WL1271_INI_MAX_SMART_REFLEX_PARAM 16
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/init.c
index 8044bba70ee..785a5304bfc 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/init.c
@@ -25,11 +25,11 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 
-#include "wl1271_init.h"
+#include "init.h"
 #include "wl12xx_80211.h"
-#include "wl1271_acx.h"
-#include "wl1271_cmd.h"
-#include "wl1271_reg.h"
+#include "acx.h"
+#include "cmd.h"
+#include "reg.h"
 
 static int wl1271_init_hwenc_config(struct wl1271 *wl)
 {
@@ -53,18 +53,16 @@ static int wl1271_init_hwenc_config(struct wl1271 *wl)
 int wl1271_init_templates_config(struct wl1271 *wl)
 {
 	int ret, i;
-	size_t size;
 
 	/* send empty templates for fw memory reservation */
 	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, NULL,
-				      sizeof(struct wl12xx_probe_req_template),
+				      WL1271_CMD_TEMPL_MAX_SIZE,
 				      0, WL1271_RATE_AUTOMATIC);
 	if (ret < 0)
 		return ret;
 
-	size = sizeof(struct wl12xx_probe_req_template);
 	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
-				      NULL, size, 0,
+				      NULL, WL1271_CMD_TEMPL_MAX_SIZE, 0,
 				      WL1271_RATE_AUTOMATIC);
 	if (ret < 0)
 		return ret;
@@ -102,6 +100,13 @@ int wl1271_init_templates_config(struct wl1271 *wl)
 	if (ret < 0)
 		return ret;
 
+	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_ARP_RSP, NULL,
+				      sizeof
+				      (struct wl12xx_arp_rsp_template),
+				      0, WL1271_RATE_AUTOMATIC);
+	if (ret < 0)
+		return ret;
+
 	for (i = 0; i < CMD_TEMPL_KLV_IDX_MAX; i++) {
 		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_KLV, NULL,
 					      WL1271_CMD_TEMPL_MAX_SIZE, i,
@@ -290,7 +295,7 @@ int wl1271_hw_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Default fragmentation threshold */
-	ret = wl1271_acx_frag_threshold(wl);
+	ret = wl1271_acx_frag_threshold(wl, wl->conf.tx.frag_threshold);
 	if (ret < 0)
 		goto out_free_memmap;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.h b/drivers/net/wireless/wl12xx/init.h
index bc26f8c53b9..7762421f860 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.h
+++ b/drivers/net/wireless/wl12xx/init.h
@@ -21,10 +21,10 @@
  *
  */
 
-#ifndef __WL1271_INIT_H__
-#define __WL1271_INIT_H__
+#ifndef __INIT_H__
+#define __INIT_H__
 
-#include "wl1271.h"
+#include "wl12xx.h"
 
 int wl1271_hw_init_power_auth(struct wl1271 *wl);
 int wl1271_init_templates_config(struct wl1271 *wl);
diff --git a/drivers/net/wireless/wl12xx/wl1271_io.c b/drivers/net/wireless/wl12xx/io.c
index c8759acef13..d557f73e7c1 100644
--- a/drivers/net/wireless/wl12xx/wl1271_io.c
+++ b/drivers/net/wireless/wl12xx/io.c
@@ -26,9 +26,9 @@
 #include <linux/crc7.h>
 #include <linux/spi/spi.h>
 
-#include "wl1271.h"
+#include "wl12xx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_io.h"
+#include "io.h"
 
 #define OCP_CMD_LOOP  32
 
@@ -113,6 +113,7 @@ int wl1271_set_partition(struct wl1271 *wl,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(wl1271_set_partition);
 
 void wl1271_io_reset(struct wl1271 *wl)
 {
diff --git a/drivers/net/wireless/wl12xx/wl1271_io.h b/drivers/net/wireless/wl12xx/io.h
index c1f92e65ded..844b32b170b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_io.h
+++ b/drivers/net/wireless/wl12xx/io.h
@@ -22,10 +22,10 @@
  *
  */
 
-#ifndef __WL1271_IO_H__
-#define __WL1271_IO_H__
+#ifndef __IO_H__
+#define __IO_H__
 
-#include "wl1271_reg.h"
+#include "reg.h"
 
 #define HW_ACCESS_MEMORY_MAX_RANGE	0x1FFC0
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/main.c
index 48a4b9961ae..062247ef3ad 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -31,20 +31,20 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include "wl1271.h"
+#include "wl12xx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_reg.h"
-#include "wl1271_io.h"
-#include "wl1271_event.h"
-#include "wl1271_tx.h"
-#include "wl1271_rx.h"
-#include "wl1271_ps.h"
-#include "wl1271_init.h"
-#include "wl1271_debugfs.h"
-#include "wl1271_cmd.h"
-#include "wl1271_boot.h"
-#include "wl1271_testmode.h"
-#include "wl1271_scan.h"
+#include "reg.h"
+#include "io.h"
+#include "event.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+#include "debugfs.h"
+#include "cmd.h"
+#include "boot.h"
+#include "testmode.h"
+#include "scan.h"
 
 #define WL1271_BOOT_RETRIES 3
 
@@ -335,6 +335,28 @@ out:
 	return NOTIFY_OK;
 }
 
+static int wl1271_reg_notify(struct wiphy *wiphy,
+			     struct regulatory_request *request)
+{
+	struct ieee80211_supported_band *band;
+	struct ieee80211_channel *ch;
+	int i;
+
+	band = wiphy->bands[IEEE80211_BAND_5GHZ];
+	for (i = 0; i < band->n_channels; i++) {
+		ch = &band->channels[i];
+		if (ch->flags & IEEE80211_CHAN_DISABLED)
+			continue;
+
+		if (ch->flags & IEEE80211_CHAN_RADAR)
+			ch->flags |= IEEE80211_CHAN_NO_IBSS |
+				     IEEE80211_CHAN_PASSIVE_SCAN;
+
+	}
+
+	return 0;
+}
+
 static void wl1271_conf_init(struct wl1271 *wl)
 {
 
@@ -404,7 +426,7 @@ static int wl1271_plt_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Default fragmentation threshold */
-	ret = wl1271_acx_frag_threshold(wl);
+	ret = wl1271_acx_frag_threshold(wl, wl->conf.tx.frag_threshold);
 	if (ret < 0)
 		goto out_free_memmap;
 
@@ -481,9 +503,9 @@ static void wl1271_fw_status(struct wl1271 *wl,
 		total += cnt;
 	}
 
-	/* if more blocks are available now, schedule some tx work */
-	if (total && !skb_queue_empty(&wl->tx_queue))
-		ieee80211_queue_work(wl->hw, &wl->tx_work);
+	/* if more blocks are available now, tx work can be scheduled */
+	if (total)
+		clear_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags);
 
 	/* update the host-chipset time offset */
 	getnstimeofday(&ts);
@@ -529,6 +551,15 @@ static void wl1271_irq_work(struct work_struct *work)
 
 		intr &= WL1271_INTR_MASK;
 
+		if (unlikely(intr & WL1271_ACX_INTR_WATCHDOG)) {
+			wl1271_error("watchdog interrupt received! "
+				     "starting recovery.");
+			ieee80211_queue_work(wl->hw, &wl->recovery_work);
+
+			/* restarting the chip. ignore any other interrupt. */
+			goto out;
+		}
+
 		if (intr & WL1271_ACX_INTR_DATA) {
 			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
 
@@ -537,6 +568,16 @@ static void wl1271_irq_work(struct work_struct *work)
 			    (wl->tx_results_count & 0xff))
 				wl1271_tx_complete(wl);
 
+			/* Check if any tx blocks were freed */
+			if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags) &&
+			    wl->tx_queue_count) {
+				/*
+				 * In order to avoid starvation of the TX path,
+				 * call the work function directly.
+				 */
+				wl1271_tx_work_locked(wl);
+			}
+
 			wl1271_rx(wl, wl->fw_status);
 		}
 
@@ -850,30 +891,54 @@ static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	struct ieee80211_tx_info *txinfo = IEEE80211_SKB_CB(skb);
 	struct ieee80211_sta *sta = txinfo->control.sta;
 	unsigned long flags;
+	int q;
 
-	/* peek into the rates configured in the STA entry */
+	/*
+	 * peek into the rates configured in the STA entry.
+	 * The rates set after connection stage, The first block only BG sets:
+	 * the compare is for bit 0-16 of sta_rate_set. The second block add
+	 * HT rates in case of HT supported.
+	 */
 	spin_lock_irqsave(&wl->wl_lock, flags);
-	if (sta && sta->supp_rates[conf->channel->band] != wl->sta_rate_set) {
+	if (sta &&
+	    (sta->supp_rates[conf->channel->band] !=
+	    (wl->sta_rate_set & HW_BG_RATES_MASK))) {
 		wl->sta_rate_set = sta->supp_rates[conf->channel->band];
 		set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags);
 	}
+
+#ifdef CONFIG_WL12XX_HT
+	if (sta &&
+	    sta->ht_cap.ht_supported &&
+	    ((wl->sta_rate_set >> HW_HT_RATES_OFFSET) !=
+	      sta->ht_cap.mcs.rx_mask[0])) {
+		/* Clean MCS bits before setting them */
+		wl->sta_rate_set &= HW_BG_RATES_MASK;
+		wl->sta_rate_set |=
+			(sta->ht_cap.mcs.rx_mask[0] << HW_HT_RATES_OFFSET);
+		set_bit(WL1271_FLAG_STA_RATES_CHANGED, &wl->flags);
+	}
+#endif
+	wl->tx_queue_count++;
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
 	/* queue the packet */
-	skb_queue_tail(&wl->tx_queue, skb);
+	q = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
+	skb_queue_tail(&wl->tx_queue[q], skb);
 
 	/*
 	 * The chip specific setup must run before the first TX packet -
 	 * before that, the tx_work will not be initialized!
 	 */
 
-	ieee80211_queue_work(wl->hw, &wl->tx_work);
+	if (!test_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags))
+		ieee80211_queue_work(wl->hw, &wl->tx_work);
 
 	/*
 	 * The workqueue is slow to process the tx_queue and we need stop
 	 * the queue here, otherwise the queue will get too long.
 	 */
-	if (skb_queue_len(&wl->tx_queue) >= WL1271_TX_QUEUE_HIGH_WATERMARK) {
+	if (wl->tx_queue_count >= WL1271_TX_QUEUE_HIGH_WATERMARK) {
 		wl1271_debug(DEBUG_TX, "op_tx: stopping queues");
 
 		spin_lock_irqsave(&wl->wl_lock, flags);
@@ -919,18 +984,19 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 	struct wiphy *wiphy = hw->wiphy;
 	int retries = WL1271_BOOT_RETRIES;
 	int ret = 0;
+	bool booted = false;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
 		     vif->type, vif->addr);
 
 	mutex_lock(&wl->mutex);
 	if (wl->vif) {
+		wl1271_debug(DEBUG_MAC80211,
+			     "multiple vifs are not supported yet");
 		ret = -EBUSY;
 		goto out;
 	}
 
-	wl->vif = vif;
-
 	switch (vif->type) {
 	case NL80211_IFTYPE_STATION:
 		wl->bss_type = BSS_TYPE_STA_BSS;
@@ -968,15 +1034,8 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw,
 		if (ret < 0)
 			goto irq_disable;
 
-		wl->state = WL1271_STATE_ON;
-		wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
-
-		/* update hw/fw version info in wiphy struct */
-		wiphy->hw_version = wl->chip.id;
-		strncpy(wiphy->fw_version, wl->chip.fw_ver,
-			sizeof(wiphy->fw_version));
-
-		goto out;
+		booted = true;
+		break;
 
 irq_disable:
 		wl1271_disable_interrupts(wl);
@@ -994,8 +1053,31 @@ power_off:
 		wl1271_power_off(wl);
 	}
 
-	wl1271_error("firmware boot failed despite %d retries",
-		     WL1271_BOOT_RETRIES);
+	if (!booted) {
+		wl1271_error("firmware boot failed despite %d retries",
+			     WL1271_BOOT_RETRIES);
+		goto out;
+	}
+
+	wl->vif = vif;
+	wl->state = WL1271_STATE_ON;
+	wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
+
+	/* update hw/fw version info in wiphy struct */
+	wiphy->hw_version = wl->chip.id;
+	strncpy(wiphy->fw_version, wl->chip.fw_ver,
+		sizeof(wiphy->fw_version));
+
+	/*
+	 * Now we know if 11a is supported (info from the NVS), so disable
+	 * 11a channels if not supported
+	 */
+	if (!wl->enable_11a)
+		wiphy->bands[IEEE80211_BAND_5GHZ]->n_channels = 0;
+
+	wl1271_debug(DEBUG_MAC80211, "11a is %ssupported",
+		     wl->enable_11a ? "" : "not ");
+
 out:
 	mutex_unlock(&wl->mutex);
 
@@ -1025,6 +1107,7 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl)
 		wl->scan.state = WL1271_SCAN_STATE_IDLE;
 		kfree(wl->scan.scanned_ch);
 		wl->scan.scanned_ch = NULL;
+		wl->scan.req = NULL;
 		ieee80211_scan_completed(wl->hw, true);
 	}
 
@@ -1088,10 +1171,16 @@ static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
 	struct wl1271 *wl = hw->priv;
 
 	mutex_lock(&wl->mutex);
-	WARN_ON(wl->vif != vif);
-	__wl1271_op_remove_interface(wl);
-	mutex_unlock(&wl->mutex);
+	/*
+	 * wl->vif can be null here if someone shuts down the interface
+	 * just when hardware recovery has been started.
+	 */
+	if (wl->vif) {
+		WARN_ON(wl->vif != vif);
+		__wl1271_op_remove_interface(wl);
+	}
 
+	mutex_unlock(&wl->mutex);
 	cancel_work_sync(&wl->recovery_work);
 }
 
@@ -1312,8 +1401,10 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 
 	mutex_lock(&wl->mutex);
 
-	if (unlikely(wl->state == WL1271_STATE_OFF))
+	if (unlikely(wl->state == WL1271_STATE_OFF)) {
+		ret = -EAGAIN;
 		goto out;
+	}
 
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
@@ -1536,6 +1627,11 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 
 	mutex_lock(&wl->mutex);
 
+	if (unlikely(wl->state == WL1271_STATE_OFF)) {
+		ret = -EAGAIN;
+		goto out_unlock;
+	}
+
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
 		goto out_unlock;
@@ -1645,6 +1741,16 @@ static int wl1271_op_hw_scan(struct ieee80211_hw *hw,
 
 	mutex_lock(&wl->mutex);
 
+	if (wl->state == WL1271_STATE_OFF) {
+		/*
+		 * We cannot return -EBUSY here because cfg80211 will expect
+		 * a call to ieee80211_scan_completed if we do - in this case
+		 * there won't be any call.
+		 */
+		ret = -EAGAIN;
+		goto out;
+	}
+
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
 		goto out;
@@ -1659,6 +1765,34 @@ out:
 	return ret;
 }
 
+static int wl1271_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct wl1271 *wl = hw->priv;
+	int ret = 0;
+
+	mutex_lock(&wl->mutex);
+
+	if (unlikely(wl->state == WL1271_STATE_OFF)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
+	ret = wl1271_ps_elp_wakeup(wl, false);
+	if (ret < 0)
+		goto out;
+
+	ret = wl1271_acx_frag_threshold(wl, (u16)value);
+	if (ret < 0)
+		wl1271_warning("wl1271_op_set_frag_threshold failed: %d", ret);
+
+	wl1271_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
 static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 {
 	struct wl1271 *wl = hw->priv;
@@ -1666,8 +1800,10 @@ static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 
 	mutex_lock(&wl->mutex);
 
-	if (unlikely(wl->state == WL1271_STATE_OFF))
+	if (unlikely(wl->state == WL1271_STATE_OFF)) {
+		ret = -EAGAIN;
 		goto out;
+	}
 
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
@@ -1685,21 +1821,21 @@ out:
 	return ret;
 }
 
-static void wl1271_ssid_set(struct wl1271 *wl, struct sk_buff *beacon)
+static void wl1271_ssid_set(struct wl1271 *wl, struct sk_buff *skb,
+			    int offset)
 {
-	u8 *ptr = beacon->data +
-		offsetof(struct ieee80211_mgmt, u.beacon.variable);
+	u8 *ptr = skb->data + offset;
 
 	/* find the location of the ssid in the beacon */
-	while (ptr < beacon->data + beacon->len) {
+	while (ptr < skb->data + skb->len) {
 		if (ptr[0] == WLAN_EID_SSID) {
 			wl->ssid_len = ptr[1];
 			memcpy(wl->ssid, ptr+2, wl->ssid_len);
 			return;
 		}
-		ptr += ptr[1];
+		ptr += (ptr[1] + 2);
 	}
-	wl1271_error("ad-hoc beacon template has no SSID!\n");
+	wl1271_error("No SSID in IEs!\n");
 }
 
 static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
@@ -1709,6 +1845,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 {
 	enum wl1271_cmd_ps_mode mode;
 	struct wl1271 *wl = hw->priv;
+	struct ieee80211_sta *sta = ieee80211_find_sta(vif, bss_conf->bssid);
 	bool do_join = false;
 	bool set_assoc = false;
 	int ret;
@@ -1717,6 +1854,9 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 
 	mutex_lock(&wl->mutex);
 
+	if (unlikely(wl->state == WL1271_STATE_OFF))
+		goto out;
+
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
 		goto out;
@@ -1738,8 +1878,11 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 
 		if (beacon) {
 			struct ieee80211_hdr *hdr;
+			int ieoffset = offsetof(struct ieee80211_mgmt,
+						u.beacon.variable);
+
+			wl1271_ssid_set(wl, beacon, ieoffset);
 
-			wl1271_ssid_set(wl, beacon);
 			ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
 						      beacon->data,
 						      beacon->len, 0,
@@ -1819,6 +1962,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (changed & BSS_CHANGED_ASSOC) {
 		if (bss_conf->assoc) {
 			u32 rates;
+			int ieoffset;
 			wl->aid = bss_conf->aid;
 			set_assoc = true;
 
@@ -1847,13 +1991,13 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 				goto out_sleep;
 
 			/*
-			 * The SSID is intentionally set to NULL here - the
-			 * firmware will set the probe request with a
-			 * broadcast SSID regardless of what we set in the
-			 * template.
+			 * Get a template for hardware connection maintenance
 			 */
-			ret = wl1271_cmd_build_probe_req(wl, NULL, 0,
-							 NULL, 0, wl->band);
+			dev_kfree_skb(wl->probereq);
+			wl->probereq = wl1271_cmd_build_ap_probe_req(wl, NULL);
+			ieoffset = offsetof(struct ieee80211_mgmt,
+					    u.probe_req.variable);
+			wl1271_ssid_set(wl, wl->probereq, ieoffset);
 
 			/* enable the connection monitoring feature */
 			ret = wl1271_acx_conn_monit_params(wl, true);
@@ -1876,6 +2020,10 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 			clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
 			wl->aid = 0;
 
+			/* free probe-request template */
+			dev_kfree_skb(wl->probereq);
+			wl->probereq = NULL;
+
 			/* re-enable dynamic ps - just in case */
 			ieee80211_enable_dyn_ps(wl->vif);
 
@@ -1891,9 +2039,12 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 
 			/* Disable the keep-alive feature */
 			ret = wl1271_acx_keep_alive_mode(wl, false);
-
 			if (ret < 0)
 				goto out_sleep;
+
+			/* restore the bssid filter and go to dummy bssid */
+			wl1271_unjoin(wl);
+			wl1271_dummy_join(wl);
 		}
 
 	}
@@ -1927,14 +2078,61 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
+	/*
+	 * Takes care of: New association with HT enable,
+	 *                HT information change in beacon.
+	 */
+	if (sta &&
+	    (changed & BSS_CHANGED_HT) &&
+	    (bss_conf->channel_type != NL80211_CHAN_NO_HT)) {
+		ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, true);
+		if (ret < 0) {
+			wl1271_warning("Set ht cap true failed %d", ret);
+			goto out_sleep;
+		}
+			ret = wl1271_acx_set_ht_information(wl,
+				bss_conf->ht_operation_mode);
+		if (ret < 0) {
+			wl1271_warning("Set ht information failed %d", ret);
+			goto out_sleep;
+		}
+	}
+	/*
+	 * Takes care of: New association without HT,
+	 *                Disassociation.
+	 */
+	else if (sta && (changed & BSS_CHANGED_ASSOC)) {
+		ret = wl1271_acx_set_ht_capabilities(wl, &sta->ht_cap, false);
+		if (ret < 0) {
+			wl1271_warning("Set ht cap false failed %d", ret);
+			goto out_sleep;
+		}
+	}
+
 	if (changed & BSS_CHANGED_ARP_FILTER) {
 		__be32 addr = bss_conf->arp_addr_list[0];
 		WARN_ON(wl->bss_type != BSS_TYPE_STA_BSS);
 
-		if (bss_conf->arp_addr_cnt == 1 && bss_conf->arp_filter_enabled)
-			ret = wl1271_acx_arp_ip_filter(wl, true, addr);
-		else
-			ret = wl1271_acx_arp_ip_filter(wl, false, addr);
+		if (bss_conf->arp_addr_cnt == 1 &&
+		    bss_conf->arp_filter_enabled) {
+			/*
+			 * The template should have been configured only upon
+			 * association. however, it seems that the correct ip
+			 * isn't being set (when sending), so we have to
+			 * reconfigure the template upon every ip change.
+			 */
+			ret = wl1271_cmd_build_arp_rsp(wl, addr);
+			if (ret < 0) {
+				wl1271_warning("build arp rsp failed: %d", ret);
+				goto out_sleep;
+			}
+
+			ret = wl1271_acx_arp_ip_filter(wl,
+				(ACX_ARP_FILTER_ARP_FILTERING |
+				 ACX_ARP_FILTER_AUTO_ARP),
+				addr);
+		} else
+			ret = wl1271_acx_arp_ip_filter(wl, 0, addr);
 
 		if (ret < 0)
 			goto out_sleep;
@@ -1966,6 +2164,11 @@ static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 conf tx %d", queue);
 
+	if (unlikely(wl->state == WL1271_STATE_OFF)) {
+		ret = -EAGAIN;
+		goto out;
+	}
+
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
 		goto out;
@@ -2009,6 +2212,9 @@ static u64 wl1271_op_get_tsf(struct ieee80211_hw *hw)
 
 	mutex_lock(&wl->mutex);
 
+	if (unlikely(wl->state == WL1271_STATE_OFF))
+		goto out;
+
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
 		goto out;
@@ -2030,14 +2236,14 @@ static int wl1271_op_get_survey(struct ieee80211_hw *hw, int idx,
 {
 	struct wl1271 *wl = hw->priv;
 	struct ieee80211_conf *conf = &hw->conf;
- 
+
 	if (idx != 0)
 		return -ENOENT;
- 
+
 	survey->channel = conf->channel;
 	survey->filled = SURVEY_INFO_NOISE_DBM;
 	survey->noise = wl->noise;
- 
+
 	return 0;
 }
 
@@ -2084,37 +2290,34 @@ static struct ieee80211_rate wl1271_rates[] = {
 	  .hw_value_short = CONF_HW_BIT_RATE_54MBPS, },
 };
 
-/*
- * Can't be const, mac80211 writes to this. The order of the channels here
- * is designed to improve scanning.
- */
+/* can't be const, mac80211 writes to this */
 static struct ieee80211_channel wl1271_channels[] = {
 	{ .hw_value = 1, .center_freq = 2412, .max_power = 25 },
-	{ .hw_value = 5, .center_freq = 2432, .max_power = 25 },
-	{ .hw_value = 9, .center_freq = 2452, .max_power = 25 },
-	{ .hw_value = 13, .center_freq = 2472, .max_power = 25 },
-	{ .hw_value = 4, .center_freq = 2427, .max_power = 25 },
-	{ .hw_value = 8, .center_freq = 2447, .max_power = 25 },
-	{ .hw_value = 12, .center_freq = 2467, .max_power = 25 },
-	{ .hw_value = 3, .center_freq = 2422, .max_power = 25 },
-	{ .hw_value = 7, .center_freq = 2442, .max_power = 25 },
-	{ .hw_value = 11, .center_freq = 2462, .max_power = 25 },
 	{ .hw_value = 2, .center_freq = 2417, .max_power = 25 },
+	{ .hw_value = 3, .center_freq = 2422, .max_power = 25 },
+	{ .hw_value = 4, .center_freq = 2427, .max_power = 25 },
+	{ .hw_value = 5, .center_freq = 2432, .max_power = 25 },
 	{ .hw_value = 6, .center_freq = 2437, .max_power = 25 },
+	{ .hw_value = 7, .center_freq = 2442, .max_power = 25 },
+	{ .hw_value = 8, .center_freq = 2447, .max_power = 25 },
+	{ .hw_value = 9, .center_freq = 2452, .max_power = 25 },
 	{ .hw_value = 10, .center_freq = 2457, .max_power = 25 },
+	{ .hw_value = 11, .center_freq = 2462, .max_power = 25 },
+	{ .hw_value = 12, .center_freq = 2467, .max_power = 25 },
+	{ .hw_value = 13, .center_freq = 2472, .max_power = 25 },
 };
 
 /* mapping to indexes for wl1271_rates */
 static const u8 wl1271_rate_to_idx_2ghz[] = {
 	/* MCS rates are used only with 11n */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS7 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS6 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS5 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS4 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS3 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS2 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS1 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS0 */
+	7,                            /* CONF_HW_RXTX_RATE_MCS7 */
+	6,                            /* CONF_HW_RXTX_RATE_MCS6 */
+	5,                            /* CONF_HW_RXTX_RATE_MCS5 */
+	4,                            /* CONF_HW_RXTX_RATE_MCS4 */
+	3,                            /* CONF_HW_RXTX_RATE_MCS3 */
+	2,                            /* CONF_HW_RXTX_RATE_MCS2 */
+	1,                            /* CONF_HW_RXTX_RATE_MCS1 */
+	0,                            /* CONF_HW_RXTX_RATE_MCS0 */
 
 	11,                            /* CONF_HW_RXTX_RATE_54   */
 	10,                            /* CONF_HW_RXTX_RATE_48   */
@@ -2134,12 +2337,34 @@ static const u8 wl1271_rate_to_idx_2ghz[] = {
 	0                              /* CONF_HW_RXTX_RATE_1    */
 };
 
+/* 11n STA capabilities */
+#define HW_RX_HIGHEST_RATE	72
+
+#ifdef CONFIG_WL12XX_HT
+#define WL12XX_HT_CAP { \
+	.cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20, \
+	.ht_supported = true, \
+	.ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, \
+	.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, \
+	.mcs = { \
+		.rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, \
+		.rx_highest = cpu_to_le16(HW_RX_HIGHEST_RATE), \
+		.tx_params = IEEE80211_HT_MCS_TX_DEFINED, \
+		}, \
+}
+#else
+#define WL12XX_HT_CAP { \
+	.ht_supported = false, \
+}
+#endif
+
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_supported_band wl1271_band_2ghz = {
 	.channels = wl1271_channels,
 	.n_channels = ARRAY_SIZE(wl1271_channels),
 	.bitrates = wl1271_rates,
 	.n_bitrates = ARRAY_SIZE(wl1271_rates),
+	.ht_cap	= WL12XX_HT_CAP,
 };
 
 /* 5 GHz data rates for WL1273 */
@@ -2170,66 +2395,55 @@ static struct ieee80211_rate wl1271_rates_5ghz[] = {
 	  .hw_value_short = CONF_HW_BIT_RATE_54MBPS, },
 };
 
-/*
- * 5 GHz band channels for WL1273 - can't be const, mac80211 writes to this.
- * The order of the channels here is designed to improve scanning.
- */
+/* 5 GHz band channels for WL1273 */
 static struct ieee80211_channel wl1271_channels_5ghz[] = {
-	{ .hw_value = 183, .center_freq = 4915},
-	{ .hw_value = 188, .center_freq = 4940},
+	{ .hw_value = 7, .center_freq = 5035},
 	{ .hw_value = 8, .center_freq = 5040},
-	{ .hw_value = 34, .center_freq = 5170},
-	{ .hw_value = 44, .center_freq = 5220},
-	{ .hw_value = 60, .center_freq = 5300},
-	{ .hw_value = 112, .center_freq = 5560},
-	{ .hw_value = 132, .center_freq = 5660},
-	{ .hw_value = 157, .center_freq = 5785},
-	{ .hw_value = 184, .center_freq = 4920},
-	{ .hw_value = 189, .center_freq = 4945},
 	{ .hw_value = 9, .center_freq = 5045},
-	{ .hw_value = 36, .center_freq = 5180},
-	{ .hw_value = 46, .center_freq = 5230},
-	{ .hw_value = 64, .center_freq = 5320},
-	{ .hw_value = 116, .center_freq = 5580},
-	{ .hw_value = 136, .center_freq = 5680},
-	{ .hw_value = 192, .center_freq = 4960},
 	{ .hw_value = 11, .center_freq = 5055},
-	{ .hw_value = 38, .center_freq = 5190},
-	{ .hw_value = 48, .center_freq = 5240},
-	{ .hw_value = 100, .center_freq = 5500},
-	{ .hw_value = 120, .center_freq = 5600},
-	{ .hw_value = 140, .center_freq = 5700},
-	{ .hw_value = 185, .center_freq = 4925},
-	{ .hw_value = 196, .center_freq = 4980},
 	{ .hw_value = 12, .center_freq = 5060},
-	{ .hw_value = 40, .center_freq = 5200},
-	{ .hw_value = 52, .center_freq = 5260},
-	{ .hw_value = 104, .center_freq = 5520},
-	{ .hw_value = 124, .center_freq = 5620},
-	{ .hw_value = 149, .center_freq = 5745},
-	{ .hw_value = 161, .center_freq = 5805},
-	{ .hw_value = 187, .center_freq = 4935},
-	{ .hw_value = 7, .center_freq = 5035},
 	{ .hw_value = 16, .center_freq = 5080},
+	{ .hw_value = 34, .center_freq = 5170},
+	{ .hw_value = 36, .center_freq = 5180},
+	{ .hw_value = 38, .center_freq = 5190},
+	{ .hw_value = 40, .center_freq = 5200},
 	{ .hw_value = 42, .center_freq = 5210},
+	{ .hw_value = 44, .center_freq = 5220},
+	{ .hw_value = 46, .center_freq = 5230},
+	{ .hw_value = 48, .center_freq = 5240},
+	{ .hw_value = 52, .center_freq = 5260},
 	{ .hw_value = 56, .center_freq = 5280},
+	{ .hw_value = 60, .center_freq = 5300},
+	{ .hw_value = 64, .center_freq = 5320},
+	{ .hw_value = 100, .center_freq = 5500},
+	{ .hw_value = 104, .center_freq = 5520},
 	{ .hw_value = 108, .center_freq = 5540},
+	{ .hw_value = 112, .center_freq = 5560},
+	{ .hw_value = 116, .center_freq = 5580},
+	{ .hw_value = 120, .center_freq = 5600},
+	{ .hw_value = 124, .center_freq = 5620},
 	{ .hw_value = 128, .center_freq = 5640},
+	{ .hw_value = 132, .center_freq = 5660},
+	{ .hw_value = 136, .center_freq = 5680},
+	{ .hw_value = 140, .center_freq = 5700},
+	{ .hw_value = 149, .center_freq = 5745},
 	{ .hw_value = 153, .center_freq = 5765},
+	{ .hw_value = 157, .center_freq = 5785},
+	{ .hw_value = 161, .center_freq = 5805},
 	{ .hw_value = 165, .center_freq = 5825},
 };
 
 /* mapping to indexes for wl1271_rates_5ghz */
 static const u8 wl1271_rate_to_idx_5ghz[] = {
 	/* MCS rates are used only with 11n */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS7 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS6 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS5 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS4 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS3 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS2 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS1 */
-	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS0 */
+	7,                            /* CONF_HW_RXTX_RATE_MCS7 */
+	6,                            /* CONF_HW_RXTX_RATE_MCS6 */
+	5,                            /* CONF_HW_RXTX_RATE_MCS5 */
+	4,                            /* CONF_HW_RXTX_RATE_MCS4 */
+	3,                            /* CONF_HW_RXTX_RATE_MCS3 */
+	2,                            /* CONF_HW_RXTX_RATE_MCS2 */
+	1,                            /* CONF_HW_RXTX_RATE_MCS1 */
+	0,                            /* CONF_HW_RXTX_RATE_MCS0 */
 
 	7,                             /* CONF_HW_RXTX_RATE_54   */
 	6,                             /* CONF_HW_RXTX_RATE_48   */
@@ -2254,6 +2468,7 @@ static struct ieee80211_supported_band wl1271_band_5ghz = {
 	.n_channels = ARRAY_SIZE(wl1271_channels_5ghz),
 	.bitrates = wl1271_rates_5ghz,
 	.n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz),
+	.ht_cap	= WL12XX_HT_CAP,
 };
 
 static const u8 *wl1271_band_rate_to_idx[] = {
@@ -2273,6 +2488,7 @@ static const struct ieee80211_ops wl1271_ops = {
 	.set_key = wl1271_op_set_key,
 	.hw_scan = wl1271_op_hw_scan,
 	.bss_info_changed = wl1271_op_bss_info_changed,
+	.set_frag_threshold = wl1271_op_set_frag_threshold,
 	.set_rts_threshold = wl1271_op_set_rts_threshold,
 	.conf_tx = wl1271_op_conf_tx,
 	.get_tsf = wl1271_op_get_tsf,
@@ -2281,18 +2497,18 @@ static const struct ieee80211_ops wl1271_ops = {
 };
 
 
-u8 wl1271_rate_to_idx(struct wl1271 *wl, int rate)
+u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band)
 {
 	u8 idx;
 
-	BUG_ON(wl->band >= sizeof(wl1271_band_rate_to_idx)/sizeof(u8 *));
+	BUG_ON(band >= sizeof(wl1271_band_rate_to_idx)/sizeof(u8 *));
 
 	if (unlikely(rate >= CONF_HW_RXTX_RATE_MAX)) {
 		wl1271_error("Illegal RX rate from HW: %d", rate);
 		return 0;
 	}
 
-	idx = wl1271_band_rate_to_idx[wl->band][rate];
+	idx = wl1271_band_rate_to_idx[band][rate];
 	if (unlikely(idx == CONF_HW_RXTX_RATE_UNSUPPORTED)) {
 		wl1271_error("Unsupported RX rate from HW: %d", rate);
 		return 0;
@@ -2401,6 +2617,8 @@ int wl1271_register_hw(struct wl1271 *wl)
 
 	wl->mac80211_registered = true;
 
+	wl1271_debugfs_init(wl);
+
 	register_netdevice_notifier(&wl1271_dev_notifier);
 
 	wl1271_notice("loaded");
@@ -2451,12 +2669,21 @@ int wl1271_init_ieee80211(struct wl1271 *wl)
 	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_ADHOC);
 	wl->hw->wiphy->max_scan_ssids = 1;
+	/*
+	 * Maximum length of elements in scanning probe request templates
+	 * should be the maximum length possible for a template, without
+	 * the IEEE80211 header of the template
+	 */
+	wl->hw->wiphy->max_scan_ie_len = WL1271_CMD_TEMPL_MAX_SIZE -
+			sizeof(struct ieee80211_header);
 	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz;
 	wl->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wl1271_band_5ghz;
 
 	wl->hw->queues = 4;
 	wl->hw->max_rates = 1;
 
+	wl->hw->wiphy->reg_notifier = wl1271_reg_notify;
+
 	SET_IEEE80211_DEV(wl->hw, wl1271_wl_to_dev(wl));
 
 	return 0;
@@ -2495,7 +2722,8 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->hw = hw;
 	wl->plat_dev = plat_dev;
 
-	skb_queue_head_init(&wl->tx_queue);
+	for (i = 0; i < NUM_TX_QUEUES; i++)
+		skb_queue_head_init(&wl->tx_queue[i]);
 
 	INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work);
 	INIT_DELAYED_WORK(&wl->pspoll_work, wl1271_pspoll_work);
@@ -2521,6 +2749,7 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->sg_enabled = true;
 	wl->hw_pg_ver = -1;
 
+	memset(wl->tx_frames_map, 0, sizeof(wl->tx_frames_map));
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		wl->tx_frames[i] = NULL;
 
@@ -2532,8 +2761,6 @@ struct ieee80211_hw *wl1271_alloc_hw(void)
 	/* Apply default driver configuration. */
 	wl1271_conf_init(wl);
 
-	wl1271_debugfs_init(wl);
-
 	order = get_order(WL1271_AGGR_BUFFER_SIZE);
 	wl->aggr_buf = (u8 *)__get_free_pages(GFP_KERNEL, order);
 	if (!wl->aggr_buf) {
@@ -2610,6 +2837,11 @@ int wl1271_free_hw(struct wl1271 *wl)
 }
 EXPORT_SYMBOL_GPL(wl1271_free_hw);
 
+u32 wl12xx_debug_level;
+EXPORT_SYMBOL_GPL(wl12xx_debug_level);
+module_param_named(debug_level, wl12xx_debug_level, uint, DEBUG_NONE);
+MODULE_PARM_DESC(debug_level, "wl12xx debugging level");
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.c b/drivers/net/wireless/wl12xx/ps.c
index e3c332e2f97..60a3738eadb 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.c
+++ b/drivers/net/wireless/wl12xx/ps.c
@@ -21,9 +21,9 @@
  *
  */
 
-#include "wl1271_reg.h"
-#include "wl1271_ps.h"
-#include "wl1271_io.h"
+#include "reg.h"
+#include "ps.h"
+#include "io.h"
 
 #define WL1271_WAKEUP_TIMEOUT 500
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.h b/drivers/net/wireless/wl12xx/ps.h
index 6ba7b032736..8415060f08e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.h
+++ b/drivers/net/wireless/wl12xx/ps.h
@@ -21,11 +21,11 @@
  *
  */
 
-#ifndef __WL1271_PS_H__
-#define __WL1271_PS_H__
+#ifndef __PS_H__
+#define __PS_H__
 
-#include "wl1271.h"
-#include "wl1271_acx.h"
+#include "wl12xx.h"
+#include "acx.h"
 
 int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode,
 		       u32 rates, bool send);
diff --git a/drivers/net/wireless/wl12xx/wl1271_reg.h b/drivers/net/wireless/wl12xx/reg.h
index 99096077152..99096077152 100644
--- a/drivers/net/wireless/wl12xx/wl1271_reg.h
+++ b/drivers/net/wireless/wl12xx/reg.h
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/rx.c
index bea133b6e48..682304c30b8 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.c
+++ b/drivers/net/wireless/wl12xx/rx.c
@@ -23,11 +23,11 @@
 
 #include <linux/gfp.h>
 
-#include "wl1271.h"
-#include "wl1271_acx.h"
-#include "wl1271_reg.h"
-#include "wl1271_rx.h"
-#include "wl1271_io.h"
+#include "wl12xx.h"
+#include "acx.h"
+#include "reg.h"
+#include "rx.h"
+#include "io.h"
 
 static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status,
 				  u32 drv_rx_counter)
@@ -48,10 +48,24 @@ static void wl1271_rx_status(struct wl1271 *wl,
 			     struct ieee80211_rx_status *status,
 			     u8 beacon)
 {
+	enum ieee80211_band desc_band;
+
 	memset(status, 0, sizeof(struct ieee80211_rx_status));
 
 	status->band = wl->band;
-	status->rate_idx = wl1271_rate_to_idx(wl, desc->rate);
+
+	if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
+		desc_band = IEEE80211_BAND_2GHZ;
+	else
+		desc_band = IEEE80211_BAND_5GHZ;
+
+	status->rate_idx = wl1271_rate_to_idx(desc->rate, desc_band);
+
+#ifdef CONFIG_WL12XX_HT
+	/* 11n support */
+	if (desc->rate <= CONF_HW_RXTX_RATE_MCS0)
+		status->flag |= RX_FLAG_HT;
+#endif
 
 	status->signal = desc->rssi;
 
@@ -170,10 +184,14 @@ void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
 		while (pkt_offset < buf_size) {
 			pkt_length = wl1271_rx_get_buf_size(status,
 					drv_rx_counter);
-			if (wl1271_rx_handle_data(wl,
-					wl->aggr_buf + pkt_offset,
-					pkt_length) < 0)
-				break;
+			/*
+			 * the handle data call can only fail in memory-outage
+			 * conditions, in that case the received frame will just
+			 * be dropped.
+			 */
+			wl1271_rx_handle_data(wl,
+					      wl->aggr_buf + pkt_offset,
+					      pkt_length);
 			wl->rx_counter++;
 			drv_rx_counter++;
 			drv_rx_counter &= NUM_RX_PKT_DESC_MOD_MASK;
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.h b/drivers/net/wireless/wl12xx/rx.h
index 13a232333b1..3abb26fe036 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.h
+++ b/drivers/net/wireless/wl12xx/rx.h
@@ -22,8 +22,8 @@
  *
  */
 
-#ifndef __WL1271_RX_H__
-#define __WL1271_RX_H__
+#ifndef __RX_H__
+#define __RX_H__
 
 #include <linux/bitops.h>
 
@@ -116,6 +116,6 @@ struct wl1271_rx_descriptor {
 } __packed;
 
 void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status);
-u8 wl1271_rate_to_idx(struct wl1271 *wl, int rate);
+u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_scan.c b/drivers/net/wireless/wl12xx/scan.c
index 909bb47995b..6f897b9d90c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -23,10 +23,10 @@
 
 #include <linux/ieee80211.h>
 
-#include "wl1271.h"
-#include "wl1271_cmd.h"
-#include "wl1271_scan.h"
-#include "wl1271_acx.h"
+#include "wl12xx.h"
+#include "cmd.h"
+#include "scan.h"
+#include "acx.h"
 
 void wl1271_scan_complete_work(struct work_struct *work)
 {
@@ -48,14 +48,19 @@ void wl1271_scan_complete_work(struct work_struct *work)
 	wl->scan.state = WL1271_SCAN_STATE_IDLE;
 	kfree(wl->scan.scanned_ch);
 	wl->scan.scanned_ch = NULL;
-	mutex_unlock(&wl->mutex);
-
+	wl->scan.req = NULL;
 	ieee80211_scan_completed(wl->hw, false);
 
+	/* restore hardware connection monitoring template */
+	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
+		wl1271_cmd_build_ap_probe_req(wl, wl->probereq);
+
 	if (wl->scan.failed) {
 		wl1271_info("Scan completed due to error.");
 		ieee80211_queue_work(wl->hw, &wl->recovery_work);
 	}
+	mutex_unlock(&wl->mutex);
+
 }
 
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_scan.h b/drivers/net/wireless/wl12xx/scan.h
index 6d57127b5e6..421a750add5 100644
--- a/drivers/net/wireless/wl12xx/wl1271_scan.h
+++ b/drivers/net/wireless/wl12xx/scan.h
@@ -21,10 +21,10 @@
  *
  */
 
-#ifndef __WL1271_SCAN_H__
-#define __WL1271_SCAN_H__
+#ifndef __SCAN_H__
+#define __SCAN_H__
 
-#include "wl1271.h"
+#include "wl12xx.h"
 
 int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
 		struct cfg80211_scan_request *req);
diff --git a/drivers/net/wireless/wl12xx/wl1271_sdio.c b/drivers/net/wireless/wl12xx/sdio.c
index 784ef343264..93cbb8d5aba 100644
--- a/drivers/net/wireless/wl12xx/wl1271_sdio.c
+++ b/drivers/net/wireless/wl12xx/sdio.c
@@ -32,9 +32,9 @@
 #include <linux/wl12xx.h>
 #include <linux/pm_runtime.h>
 
-#include "wl1271.h"
+#include "wl12xx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_io.h"
+#include "io.h"
 
 #ifndef SDIO_VENDOR_ID_TI
 #define SDIO_VENDOR_ID_TI		0x0097
diff --git a/drivers/net/wireless/wl12xx/sdio_test.c b/drivers/net/wireless/wl12xx/sdio_test.c
new file mode 100644
index 00000000000..9fcbd3dd849
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/sdio_test.c
@@ -0,0 +1,520 @@
+/*
+ * SDIO testing driver for wl12xx
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Roger Quadros <roger.quadros@nokia.com>
+ *
+ * wl12xx read/write routines taken from the main module
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/vmalloc.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/card.h>
+#include <linux/gpio.h>
+#include <linux/wl12xx.h>
+#include <linux/kthread.h>
+#include <linux/firmware.h>
+#include <linux/pm_runtime.h>
+
+#include "wl12xx.h"
+#include "io.h"
+#include "boot.h"
+
+#ifndef SDIO_VENDOR_ID_TI
+#define SDIO_VENDOR_ID_TI		0x0097
+#endif
+
+#ifndef SDIO_DEVICE_ID_TI_WL1271
+#define SDIO_DEVICE_ID_TI_WL1271	0x4076
+#endif
+
+static bool rx, tx;
+
+module_param(rx, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(rx, "Perform rx test. Default (0). "
+	"This test continuously reads data from the SDIO device.\n");
+
+module_param(tx, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tx, "Perform tx test. Default (0). "
+	"This test continuously writes data to the SDIO device.\n");
+
+struct wl1271_test {
+	struct wl1271 wl;
+	struct task_struct *test_task;
+};
+
+static const struct sdio_device_id wl1271_devices[] = {
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) },
+	{}
+};
+
+static inline struct sdio_func *wl_to_func(struct wl1271 *wl)
+{
+	return wl->if_priv;
+}
+
+static struct device *wl1271_sdio_wl_to_dev(struct wl1271 *wl)
+{
+	return &(wl_to_func(wl)->dev);
+}
+
+static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf,
+		size_t len, bool fixed)
+{
+	int ret = 0;
+	struct sdio_func *func = wl_to_func(wl);
+
+	if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
+		((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
+		wl1271_debug(DEBUG_SDIO, "sdio read 52 addr 0x%x, byte 0x%02x",
+				addr, ((u8 *)buf)[0]);
+	} else {
+		if (fixed)
+			ret = sdio_readsb(func, buf, addr, len);
+		else
+			ret = sdio_memcpy_fromio(func, buf, addr, len);
+
+		wl1271_debug(DEBUG_SDIO, "sdio read 53 addr 0x%x, %zu bytes",
+				addr, len);
+		wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len);
+	}
+
+	if (ret)
+		wl1271_error("sdio read failed (%d)", ret);
+}
+
+static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf,
+		size_t len, bool fixed)
+{
+	int ret = 0;
+	struct sdio_func *func = wl_to_func(wl);
+
+	if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
+		sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
+		wl1271_debug(DEBUG_SDIO, "sdio write 52 addr 0x%x, byte 0x%02x",
+				addr, ((u8 *)buf)[0]);
+	} else {
+		wl1271_debug(DEBUG_SDIO, "sdio write 53 addr 0x%x, %zu bytes",
+				addr, len);
+		wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len);
+
+		if (fixed)
+			ret = sdio_writesb(func, addr, buf, len);
+		else
+			ret = sdio_memcpy_toio(func, addr, buf, len);
+	}
+	if (ret)
+		wl1271_error("sdio write failed (%d)", ret);
+
+}
+
+static int wl1271_sdio_set_power(struct wl1271 *wl, bool enable)
+{
+	struct sdio_func *func = wl_to_func(wl);
+	int ret;
+
+	/* Let the SDIO stack handle wlan_enable control, so we
+	 * keep host claimed while wlan is in use to keep wl1271
+	 * alive.
+	 */
+	if (enable) {
+		/* Power up the card */
+		ret = pm_runtime_get_sync(&func->dev);
+		if (ret < 0)
+			goto out;
+		sdio_claim_host(func);
+		sdio_enable_func(func);
+		sdio_release_host(func);
+	} else {
+		sdio_claim_host(func);
+		sdio_disable_func(func);
+		sdio_release_host(func);
+
+		/* Power down the card */
+		ret = pm_runtime_put_sync(&func->dev);
+	}
+
+out:
+	return ret;
+}
+
+static void wl1271_sdio_disable_interrupts(struct wl1271 *wl)
+{
+}
+
+static void wl1271_sdio_enable_interrupts(struct wl1271 *wl)
+{
+}
+
+
+static struct wl1271_if_operations sdio_ops = {
+	.read		= wl1271_sdio_raw_read,
+	.write		= wl1271_sdio_raw_write,
+	.power		= wl1271_sdio_set_power,
+	.dev		= wl1271_sdio_wl_to_dev,
+	.enable_irq	= wl1271_sdio_enable_interrupts,
+	.disable_irq	= wl1271_sdio_disable_interrupts,
+};
+
+static void wl1271_fw_wakeup(struct wl1271 *wl)
+{
+	u32 elp_reg;
+
+	elp_reg = ELPCTRL_WAKE_UP;
+	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+}
+
+static int wl1271_fetch_firmware(struct wl1271 *wl)
+{
+	const struct firmware *fw;
+	int ret;
+
+	ret = request_firmware(&fw, WL1271_FW_NAME, wl1271_wl_to_dev(wl));
+
+	if (ret < 0) {
+		wl1271_error("could not get firmware: %d", ret);
+		return ret;
+	}
+
+	if (fw->size % 4) {
+		wl1271_error("firmware size is not multiple of 32 bits: %zu",
+				fw->size);
+		ret = -EILSEQ;
+		goto out;
+	}
+
+	wl->fw_len = fw->size;
+	wl->fw = vmalloc(wl->fw_len);
+
+	if (!wl->fw) {
+		wl1271_error("could not allocate memory for the firmware");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	memcpy(wl->fw, fw->data, wl->fw_len);
+
+	ret = 0;
+
+out:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int wl1271_fetch_nvs(struct wl1271 *wl)
+{
+	const struct firmware *fw;
+	int ret;
+
+	ret = request_firmware(&fw, WL1271_NVS_NAME, wl1271_wl_to_dev(wl));
+
+	if (ret < 0) {
+		wl1271_error("could not get nvs file: %d", ret);
+		return ret;
+	}
+
+	wl->nvs = kmemdup(fw->data, sizeof(struct wl1271_nvs_file), GFP_KERNEL);
+
+	if (!wl->nvs) {
+		wl1271_error("could not allocate memory for the nvs file");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	wl->nvs_len = fw->size;
+
+out:
+	release_firmware(fw);
+
+	return ret;
+}
+
+static int wl1271_chip_wakeup(struct wl1271 *wl)
+{
+	struct wl1271_partition_set partition;
+	int ret;
+
+	msleep(WL1271_PRE_POWER_ON_SLEEP);
+	ret = wl1271_power_on(wl);
+	if (ret)
+		return ret;
+
+	msleep(WL1271_POWER_ON_SLEEP);
+
+	/* We don't need a real memory partition here, because we only want
+	 * to use the registers at this point. */
+	memset(&partition, 0, sizeof(partition));
+	partition.reg.start = REGISTERS_BASE;
+	partition.reg.size = REGISTERS_DOWN_SIZE;
+	wl1271_set_partition(wl, &partition);
+
+	/* ELP module wake up */
+	wl1271_fw_wakeup(wl);
+
+	/* whal_FwCtrl_BootSm() */
+
+	/* 0. read chip id from CHIP_ID */
+	wl->chip.id = wl1271_read32(wl, CHIP_ID_B);
+
+	/* 1. check if chip id is valid */
+
+	switch (wl->chip.id) {
+	case CHIP_ID_1271_PG10:
+		wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete",
+				wl->chip.id);
+		break;
+	case CHIP_ID_1271_PG20:
+		wl1271_notice("chip id 0x%x (1271 PG20)",
+				wl->chip.id);
+		break;
+	default:
+		wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
+		return -ENODEV;
+	}
+
+	return ret;
+}
+
+static struct wl1271_partition_set part_down = {
+	.mem = {
+		.start = 0x00000000,
+		.size  = 0x000177c0
+	},
+	.reg = {
+		.start = REGISTERS_BASE,
+		.size  = 0x00008800
+	},
+	.mem2 = {
+		.start = 0x00000000,
+		.size  = 0x00000000
+	},
+	.mem3 = {
+		.start = 0x00000000,
+		.size  = 0x00000000
+	},
+};
+
+static int tester(void *data)
+{
+	struct wl1271 *wl = data;
+	struct sdio_func *func = wl_to_func(wl);
+	struct device *pdev = &func->dev;
+	int ret = 0;
+	bool rx_started = 0;
+	bool tx_started = 0;
+	uint8_t *tx_buf, *rx_buf;
+	int test_size = PAGE_SIZE;
+	u32 addr = 0;
+	struct wl1271_partition_set partition;
+
+	/* We assume chip is powered up and firmware fetched */
+
+	memcpy(&partition, &part_down, sizeof(partition));
+	partition.mem.start = addr;
+	wl1271_set_partition(wl, &partition);
+
+	tx_buf = kmalloc(test_size, GFP_KERNEL);
+	rx_buf = kmalloc(test_size, GFP_KERNEL);
+	if (!tx_buf || !rx_buf) {
+		dev_err(pdev,
+			"Could not allocate memory. Test will not run.\n");
+		ret = -ENOMEM;
+		goto free;
+	}
+
+	memset(tx_buf, 0x5a, test_size);
+
+	/* write something in data area so we can read it back */
+	wl1271_write(wl, addr, tx_buf, test_size, false);
+
+	while (!kthread_should_stop()) {
+		if (rx && !rx_started) {
+			dev_info(pdev, "starting rx test\n");
+			rx_started = 1;
+		} else if (!rx && rx_started) {
+			dev_info(pdev, "stopping rx test\n");
+			rx_started = 0;
+		}
+
+		if (tx && !tx_started) {
+			dev_info(pdev, "starting tx test\n");
+			tx_started = 1;
+		} else if (!tx && tx_started) {
+			dev_info(pdev, "stopping tx test\n");
+			tx_started = 0;
+		}
+
+		if (rx_started)
+			wl1271_read(wl, addr, rx_buf, test_size, false);
+
+		if (tx_started)
+			wl1271_write(wl, addr, tx_buf, test_size, false);
+
+		if (!rx_started && !tx_started)
+			msleep(100);
+	}
+
+free:
+	kfree(tx_buf);
+	kfree(rx_buf);
+	return ret;
+}
+
+static int __devinit wl1271_probe(struct sdio_func *func,
+		const struct sdio_device_id *id)
+{
+	const struct wl12xx_platform_data *wlan_data;
+	struct wl1271 *wl;
+	struct wl1271_test *wl_test;
+	int ret = 0;
+
+	/* wl1271 has 2 sdio functions we handle just the wlan part */
+	if (func->num != 0x02)
+		return -ENODEV;
+
+	wl_test = kzalloc(sizeof(struct wl1271_test), GFP_KERNEL);
+	if (!wl_test) {
+		dev_err(&func->dev, "Could not allocate memory\n");
+		return -ENOMEM;
+	}
+
+	wl = &wl_test->wl;
+
+	wl->if_priv = func;
+	wl->if_ops = &sdio_ops;
+
+	/* Grab access to FN0 for ELP reg. */
+	func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+
+	wlan_data = wl12xx_get_platform_data();
+	if (IS_ERR(wlan_data)) {
+		ret = PTR_ERR(wlan_data);
+		dev_err(&func->dev, "missing wlan platform data: %d\n", ret);
+		goto out_free;
+	}
+
+	wl->irq = wlan_data->irq;
+	wl->ref_clock = wlan_data->board_ref_clock;
+
+	sdio_set_drvdata(func, wl_test);
+
+
+	/* power up the device */
+	ret = wl1271_chip_wakeup(wl);
+	if (ret) {
+		dev_err(&func->dev, "could not wake up chip\n");
+		goto out_free;
+	}
+
+	if (wl->fw == NULL) {
+		ret = wl1271_fetch_firmware(wl);
+		if (ret < 0) {
+			dev_err(&func->dev, "firmware fetch error\n");
+			goto out_off;
+		}
+	}
+
+	/* fetch NVS */
+	if (wl->nvs == NULL) {
+		ret = wl1271_fetch_nvs(wl);
+		if (ret < 0) {
+			dev_err(&func->dev, "NVS fetch error\n");
+			goto out_off;
+		}
+	}
+
+	ret = wl1271_load_firmware(wl);
+	if (ret < 0) {
+		dev_err(&func->dev, "firmware load error: %d\n", ret);
+		goto out_free;
+	}
+
+	dev_info(&func->dev, "initialized\n");
+
+	/* I/O testing will be done in the tester thread */
+
+	wl_test->test_task = kthread_run(tester, wl, "sdio_tester");
+	if (IS_ERR(wl_test->test_task)) {
+		dev_err(&func->dev, "unable to create kernel thread\n");
+		ret = PTR_ERR(wl_test->test_task);
+		goto out_free;
+	}
+
+	return 0;
+
+out_off:
+	/* power off the chip */
+	wl1271_power_off(wl);
+
+out_free:
+	kfree(wl_test);
+	return ret;
+}
+
+static void __devexit wl1271_remove(struct sdio_func *func)
+{
+	struct wl1271_test *wl_test = sdio_get_drvdata(func);
+
+	/* stop the I/O test thread */
+	kthread_stop(wl_test->test_task);
+
+	/* power off the chip */
+	wl1271_power_off(&wl_test->wl);
+
+	vfree(wl_test->wl.fw);
+	wl_test->wl.fw = NULL;
+	kfree(wl_test->wl.nvs);
+	wl_test->wl.nvs = NULL;
+
+	kfree(wl_test);
+}
+
+static struct sdio_driver wl1271_sdio_driver = {
+	.name		= "wl12xx_sdio_test",
+	.id_table	= wl1271_devices,
+	.probe		= wl1271_probe,
+	.remove		= __devexit_p(wl1271_remove),
+};
+
+static int __init wl1271_init(void)
+{
+	int ret;
+
+	ret = sdio_register_driver(&wl1271_sdio_driver);
+	if (ret < 0)
+		pr_err("failed to register sdio driver: %d\n", ret);
+
+	return ret;
+}
+module_init(wl1271_init);
+
+static void __exit wl1271_exit(void)
+{
+	sdio_unregister_driver(&wl1271_sdio_driver);
+}
+module_exit(wl1271_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Roger Quadros <roger.quadros@nokia.com>");
+
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/spi.c
index ef801680773..46714910f98 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/spi.c
@@ -28,11 +28,11 @@
 #include <linux/wl12xx.h>
 #include <linux/slab.h>
 
-#include "wl1271.h"
+#include "wl12xx.h"
 #include "wl12xx_80211.h"
-#include "wl1271_io.h"
+#include "io.h"
 
-#include "wl1271_reg.h"
+#include "reg.h"
 
 #define WSPI_CMD_READ                 0x40000000
 #define WSPI_CMD_WRITE                0x00000000
diff --git a/drivers/net/wireless/wl12xx/wl1271_testmode.c b/drivers/net/wireless/wl12xx/testmode.c
index a3aa84386c8..e64403b6896 100644
--- a/drivers/net/wireless/wl12xx/wl1271_testmode.c
+++ b/drivers/net/wireless/wl12xx/testmode.c
@@ -20,13 +20,13 @@
  * 02110-1301 USA
  *
  */
-#include "wl1271_testmode.h"
+#include "testmode.h"
 
 #include <linux/slab.h>
 #include <net/genetlink.h>
 
-#include "wl1271.h"
-#include "wl1271_acx.h"
+#include "wl12xx.h"
+#include "acx.h"
 
 #define WL1271_TM_MAX_DATA_LENGTH 1024
 
@@ -37,6 +37,7 @@ enum wl1271_tm_commands {
 	WL1271_TM_CMD_CONFIGURE,
 	WL1271_TM_CMD_NVS_PUSH,
 	WL1271_TM_CMD_SET_PLT_MODE,
+	WL1271_TM_CMD_RECOVER,
 
 	__WL1271_TM_CMD_AFTER_LAST
 };
@@ -248,6 +249,15 @@ static int wl1271_tm_cmd_set_plt_mode(struct wl1271 *wl, struct nlattr *tb[])
 	return ret;
 }
 
+static int wl1271_tm_cmd_recover(struct wl1271 *wl, struct nlattr *tb[])
+{
+	wl1271_debug(DEBUG_TESTMODE, "testmode cmd recover");
+
+	ieee80211_queue_work(wl->hw, &wl->recovery_work);
+
+	return 0;
+}
+
 int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len)
 {
 	struct wl1271 *wl = hw->priv;
@@ -272,6 +282,8 @@ int wl1271_tm_cmd(struct ieee80211_hw *hw, void *data, int len)
 		return wl1271_tm_cmd_nvs_push(wl, tb);
 	case WL1271_TM_CMD_SET_PLT_MODE:
 		return wl1271_tm_cmd_set_plt_mode(wl, tb);
+	case WL1271_TM_CMD_RECOVER:
+		return wl1271_tm_cmd_recover(wl, tb);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/net/wireless/wl12xx/wl1271_testmode.h b/drivers/net/wireless/wl12xx/testmode.h
index c196d28f9d9..8071654259e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_testmode.h
+++ b/drivers/net/wireless/wl12xx/testmode.h
@@ -21,8 +21,8 @@
  *
  */
 
-#ifndef __WL1271_TESTMODE_H__
-#define __WL1271_TESTMODE_H__
+#ifndef __TESTMODE_H__
+#define __TESTMODE_H__
 
 #include <net/mac80211.h>
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/tx.c
index e3dc13c4d01..b44c75cd8c1 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/tx.c
@@ -24,23 +24,32 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include "wl1271.h"
-#include "wl1271_io.h"
-#include "wl1271_reg.h"
-#include "wl1271_ps.h"
-#include "wl1271_tx.h"
+#include "wl12xx.h"
+#include "io.h"
+#include "reg.h"
+#include "ps.h"
+#include "tx.h"
 
-static int wl1271_tx_id(struct wl1271 *wl, struct sk_buff *skb)
+static int wl1271_alloc_tx_id(struct wl1271 *wl, struct sk_buff *skb)
 {
-	int i;
-	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
-		if (wl->tx_frames[i] == NULL) {
-			wl->tx_frames[i] = skb;
-			wl->tx_frames_cnt++;
-			return i;
-		}
+	int id;
+
+	id = find_first_zero_bit(wl->tx_frames_map, ACX_TX_DESCRIPTORS);
+	if (id >= ACX_TX_DESCRIPTORS)
+		return -EBUSY;
 
-	return -EBUSY;
+	__set_bit(id, wl->tx_frames_map);
+	wl->tx_frames[id] = skb;
+	wl->tx_frames_cnt++;
+	return id;
+}
+
+static void wl1271_free_tx_id(struct wl1271 *wl, int id)
+{
+	if (__test_and_clear_bit(id, wl->tx_frames_map)) {
+		wl->tx_frames[id] = NULL;
+		wl->tx_frames_cnt--;
+	}
 }
 
 static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
@@ -52,10 +61,10 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 	int id, ret = -EBUSY;
 
 	if (buf_offset + total_len > WL1271_AGGR_BUFFER_SIZE)
-		return -EBUSY;
+		return -EAGAIN;
 
 	/* allocate free identifier for the packet */
-	id = wl1271_tx_id(wl, skb);
+	id = wl1271_alloc_tx_id(wl, skb);
 	if (id < 0)
 		return id;
 
@@ -79,8 +88,7 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra,
 			     "tx_allocate: size: %d, blocks: %d, id: %d",
 			     total_len, total_blocks, id);
 	} else {
-		wl->tx_frames[id] = NULL;
-		wl->tx_frames_cnt--;
+		wl1271_free_tx_id(wl, id);
 	}
 
 	return ret;
@@ -117,7 +125,6 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 	/* queue (we use same identifiers for tid's and ac's */
 	ac = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
 	desc->tid = ac;
-
 	desc->aid = TX_HW_DEFAULT_AID;
 	desc->reserved = 0;
 
@@ -201,42 +208,105 @@ u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set)
 		rate_set >>= 1;
 	}
 
+#ifdef CONFIG_WL12XX_HT
+	/* MCS rates indication are on bits 16 - 23 */
+	rate_set >>= HW_HT_RATES_OFFSET - band->n_bitrates;
+
+	for (bit = 0; bit < 8; bit++) {
+		if (rate_set & 0x1)
+			enabled_rates |= (CONF_HW_BIT_RATE_MCS_0 << bit);
+		rate_set >>= 1;
+	}
+#endif
+
 	return enabled_rates;
 }
 
-void wl1271_tx_work(struct work_struct *work)
+static void handle_tx_low_watermark(struct wl1271 *wl)
+{
+	unsigned long flags;
+
+	if (test_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags) &&
+	    wl->tx_queue_count <= WL1271_TX_QUEUE_LOW_WATERMARK) {
+		/* firmware buffer has space, restart queues */
+		spin_lock_irqsave(&wl->wl_lock, flags);
+		ieee80211_wake_queues(wl->hw);
+		clear_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+	}
+}
+
+static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl)
+{
+	struct sk_buff *skb = NULL;
+	unsigned long flags;
+
+	skb = skb_dequeue(&wl->tx_queue[CONF_TX_AC_VO]);
+	if (skb)
+		goto out;
+	skb = skb_dequeue(&wl->tx_queue[CONF_TX_AC_VI]);
+	if (skb)
+		goto out;
+	skb = skb_dequeue(&wl->tx_queue[CONF_TX_AC_BE]);
+	if (skb)
+		goto out;
+	skb = skb_dequeue(&wl->tx_queue[CONF_TX_AC_BK]);
+
+out:
+	if (skb) {
+		spin_lock_irqsave(&wl->wl_lock, flags);
+		wl->tx_queue_count--;
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+	}
+
+	return skb;
+}
+
+static void wl1271_skb_queue_head(struct wl1271 *wl, struct sk_buff *skb)
+{
+	unsigned long flags;
+	int q = wl1271_tx_get_queue(skb_get_queue_mapping(skb));
+
+	skb_queue_head(&wl->tx_queue[q], skb);
+	spin_lock_irqsave(&wl->wl_lock, flags);
+	wl->tx_queue_count++;
+	spin_unlock_irqrestore(&wl->wl_lock, flags);
+}
+
+void wl1271_tx_work_locked(struct wl1271 *wl)
 {
-	struct wl1271 *wl = container_of(work, struct wl1271, tx_work);
 	struct sk_buff *skb;
 	bool woken_up = false;
 	u32 sta_rates = 0;
-	u32 buf_offset;
+	u32 buf_offset = 0;
+	bool sent_packets = false;
 	int ret;
 
 	/* check if the rates supported by the AP have changed */
 	if (unlikely(test_and_clear_bit(WL1271_FLAG_STA_RATES_CHANGED,
 					&wl->flags))) {
 		unsigned long flags;
+
 		spin_lock_irqsave(&wl->wl_lock, flags);
 		sta_rates = wl->sta_rate_set;
 		spin_unlock_irqrestore(&wl->wl_lock, flags);
 	}
 
-	mutex_lock(&wl->mutex);
-
 	if (unlikely(wl->state == WL1271_STATE_OFF))
 		goto out;
 
 	/* if rates have changed, re-configure the rate policy */
 	if (unlikely(sta_rates)) {
+		ret = wl1271_ps_elp_wakeup(wl, false);
+		if (ret < 0)
+			goto out;
+		woken_up = true;
+
 		wl->rate_set = wl1271_tx_enabled_rates_get(wl, sta_rates);
 		wl1271_acx_rate_policies(wl);
 	}
 
-	/* Prepare the transfer buffer, by aggregating all
-	 * available packets */
-	buf_offset = 0;
-	while ((skb = skb_dequeue(&wl->tx_queue))) {
+	while ((skb = wl1271_skb_dequeue(wl))) {
 		if (!woken_up) {
 			ret = wl1271_ps_elp_wakeup(wl, false);
 			if (ret < 0)
@@ -245,13 +315,25 @@ void wl1271_tx_work(struct work_struct *work)
 		}
 
 		ret = wl1271_prepare_tx_frame(wl, skb, buf_offset);
-		if (ret == -EBUSY) {
+		if (ret == -EAGAIN) {
+			/*
+			 * Aggregation buffer is full.
+			 * Flush buffer and try again.
+			 */
+			wl1271_skb_queue_head(wl, skb);
+			wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
+				     buf_offset, true);
+			sent_packets = true;
+			buf_offset = 0;
+			continue;
+		} else if (ret == -EBUSY) {
 			/*
-			 * Either the firmware buffer is full, or the
-			 * aggregation buffer is.
+			 * Firmware buffer is full.
 			 * Queue back last skb, and stop aggregating.
 			 */
-			skb_queue_head(&wl->tx_queue, skb);
+			wl1271_skb_queue_head(wl, skb);
+			/* No work left, avoid scheduling redundant tx work */
+			set_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags);
 			goto out_ack;
 		} else if (ret < 0) {
 			dev_kfree_skb(skb);
@@ -265,14 +347,25 @@ out_ack:
 	if (buf_offset) {
 		wl1271_write(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,
 				buf_offset, true);
+		sent_packets = true;
+	}
+	if (sent_packets) {
 		/* interrupt the firmware with the new packets */
 		wl1271_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
+		handle_tx_low_watermark(wl);
 	}
 
 out:
 	if (woken_up)
 		wl1271_ps_elp_sleep(wl);
+}
 
+void wl1271_tx_work(struct work_struct *work)
+{
+	struct wl1271 *wl = container_of(work, struct wl1271, tx_work);
+
+	mutex_lock(&wl->mutex);
+	wl1271_tx_work_locked(wl);
 	mutex_unlock(&wl->mutex);
 }
 
@@ -298,7 +391,7 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
 	if (result->status == TX_SUCCESS) {
 		if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
 			info->flags |= IEEE80211_TX_STAT_ACK;
-		rate = wl1271_rate_to_idx(wl, result->rate_class_index);
+		rate = wl1271_rate_to_idx(result->rate_class_index, wl->band);
 		retries = result->ack_failures;
 	} else if (result->status == TX_RETRY_EXCEEDED) {
 		wl->stats.excessive_retries++;
@@ -335,8 +428,7 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
 
 	/* return the packet to the stack */
 	ieee80211_tx_status(wl->hw, skb);
-	wl->tx_frames[result->id] = NULL;
-	wl->tx_frames_cnt--;
+	wl1271_free_tx_id(wl, result->id);
 }
 
 /* Called upon reception of a TX complete interrupt */
@@ -375,19 +467,6 @@ void wl1271_tx_complete(struct wl1271 *wl)
 
 		wl->tx_results_count++;
 	}
-
-	if (test_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags) &&
-	    skb_queue_len(&wl->tx_queue) <= WL1271_TX_QUEUE_LOW_WATERMARK) {
-		unsigned long flags;
-
-		/* firmware buffer has space, restart queues */
-		wl1271_debug(DEBUG_TX, "tx_complete: waking queues");
-		spin_lock_irqsave(&wl->wl_lock, flags);
-		ieee80211_wake_queues(wl->hw);
-		clear_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
-		spin_unlock_irqrestore(&wl->wl_lock, flags);
-		ieee80211_queue_work(wl->hw, &wl->tx_work);
-	}
 }
 
 /* caller must hold wl->mutex */
@@ -397,19 +476,27 @@ void wl1271_tx_reset(struct wl1271 *wl)
 	struct sk_buff *skb;
 
 	/* TX failure */
-	while ((skb = skb_dequeue(&wl->tx_queue))) {
-		wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb);
-		ieee80211_tx_status(wl->hw, skb);
+	for (i = 0; i < NUM_TX_QUEUES; i++) {
+		while ((skb = skb_dequeue(&wl->tx_queue[i]))) {
+			wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb);
+			ieee80211_tx_status(wl->hw, skb);
+		}
 	}
+	wl->tx_queue_count = 0;
+
+	/*
+	 * Make sure the driver is at a consistent state, in case this
+	 * function is called from a context other than interface removal.
+	 */
+	handle_tx_low_watermark(wl);
 
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		if (wl->tx_frames[i] != NULL) {
 			skb = wl->tx_frames[i];
-			wl->tx_frames[i] = NULL;
+			wl1271_free_tx_id(wl, i);
 			wl1271_debug(DEBUG_TX, "freeing skb 0x%p", skb);
 			ieee80211_tx_status(wl->hw, skb);
 		}
-	wl->tx_frames_cnt = 0;
 }
 
 #define WL1271_TX_FLUSH_TIMEOUT 500000
@@ -424,8 +511,7 @@ void wl1271_tx_flush(struct wl1271 *wl)
 		mutex_lock(&wl->mutex);
 		wl1271_debug(DEBUG_TX, "flushing tx buffer: %d",
 			     wl->tx_frames_cnt);
-		if ((wl->tx_frames_cnt == 0) &&
-		    skb_queue_empty(&wl->tx_queue)) {
+		if ((wl->tx_frames_cnt == 0) && (wl->tx_queue_count == 0)) {
 			mutex_unlock(&wl->mutex);
 			return;
 		}
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.h b/drivers/net/wireless/wl12xx/tx.h
index d12a129ad11..903e5dc69b7 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.h
+++ b/drivers/net/wireless/wl12xx/tx.h
@@ -22,8 +22,8 @@
  *
  */
 
-#ifndef __WL1271_TX_H__
-#define __WL1271_TX_H__
+#ifndef __TX_H__
+#define __TX_H__
 
 #define TX_HW_BLOCK_SPARE                2
 #define TX_HW_BLOCK_SIZE                 252
@@ -140,10 +140,11 @@ static inline int wl1271_tx_get_queue(int queue)
 }
 
 void wl1271_tx_work(struct work_struct *work);
+void wl1271_tx_work_locked(struct wl1271 *wl);
 void wl1271_tx_complete(struct wl1271 *wl);
 void wl1271_tx_reset(struct wl1271 *wl);
 void wl1271_tx_flush(struct wl1271 *wl);
-u8 wl1271_rate_to_idx(struct wl1271 *wl, int rate);
+u8 wl1271_rate_to_idx(int rate, enum ieee80211_band band);
 u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.c b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
deleted file mode 100644
index 66c2b90ddfd..00000000000
--- a/drivers/net/wireless/wl12xx/wl1271_debugfs.c
+++ /dev/null
@@ -1,583 +0,0 @@
-/*
- * This file is part of wl1271
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include "wl1271_debugfs.h"
-
-#include <linux/skbuff.h>
-#include <linux/slab.h>
-
-#include "wl1271.h"
-#include "wl1271_acx.h"
-#include "wl1271_ps.h"
-#include "wl1271_io.h"
-
-/* ms */
-#define WL1271_DEBUGFS_STATS_LIFETIME 1000
-
-/* debugfs macros idea from mac80211 */
-
-#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...)		\
-static ssize_t name## _read(struct file *file, char __user *userbuf,	\
-			    size_t count, loff_t *ppos)			\
-{									\
-	struct wl1271 *wl = file->private_data;				\
-	char buf[buflen];						\
-	int res;							\
-									\
-	res = scnprintf(buf, buflen, fmt "\n", ##value);		\
-	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
-}									\
-									\
-static const struct file_operations name## _ops = {			\
-	.read = name## _read,						\
-	.open = wl1271_open_file_generic,				\
-	.llseek	= generic_file_llseek,					\
-};
-
-#define DEBUGFS_ADD(name, parent)					\
-	wl->debugfs.name = debugfs_create_file(#name, 0400, parent,	\
-					       wl, &name## _ops);	\
-	if (IS_ERR(wl->debugfs.name)) {					\
-		ret = PTR_ERR(wl->debugfs.name);			\
-		wl->debugfs.name = NULL;				\
-		goto out;						\
-	}
-
-#define DEBUGFS_DEL(name)						\
-	do {								\
-		debugfs_remove(wl->debugfs.name);			\
-		wl->debugfs.name = NULL;				\
-	} while (0)
-
-#define DEBUGFS_FWSTATS_FILE(sub, name, buflen, fmt)			\
-static ssize_t sub## _ ##name## _read(struct file *file,		\
-				      char __user *userbuf,		\
-				      size_t count, loff_t *ppos)	\
-{									\
-	struct wl1271 *wl = file->private_data;				\
-	char buf[buflen];						\
-	int res;							\
-									\
-	wl1271_debugfs_update_stats(wl);				\
-									\
-	res = scnprintf(buf, buflen, fmt "\n",				\
-			wl->stats.fw_stats->sub.name);			\
-	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
-}									\
-									\
-static const struct file_operations sub## _ ##name## _ops = {		\
-	.read = sub## _ ##name## _read,					\
-	.open = wl1271_open_file_generic,				\
-	.llseek	= generic_file_llseek,					\
-};
-
-#define DEBUGFS_FWSTATS_ADD(sub, name)				\
-	DEBUGFS_ADD(sub## _ ##name, wl->debugfs.fw_statistics)
-
-#define DEBUGFS_FWSTATS_DEL(sub, name)				\
-	DEBUGFS_DEL(sub## _ ##name)
-
-static void wl1271_debugfs_update_stats(struct wl1271 *wl)
-{
-	int ret;
-
-	mutex_lock(&wl->mutex);
-
-	ret = wl1271_ps_elp_wakeup(wl, false);
-	if (ret < 0)
-		goto out;
-
-	if (wl->state == WL1271_STATE_ON &&
-	    time_after(jiffies, wl->stats.fw_stats_update +
-		       msecs_to_jiffies(WL1271_DEBUGFS_STATS_LIFETIME))) {
-		wl1271_acx_statistics(wl, wl->stats.fw_stats);
-		wl->stats.fw_stats_update = jiffies;
-	}
-
-	wl1271_ps_elp_sleep(wl);
-
-out:
-	mutex_unlock(&wl->mutex);
-}
-
-static int wl1271_open_file_generic(struct inode *inode, struct file *file)
-{
-	file->private_data = inode->i_private;
-	return 0;
-}
-
-DEBUGFS_FWSTATS_FILE(tx, internal_desc_overflow, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(rx, out_of_mem, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, hdr_overflow, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, hw_stuck, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, dropped, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, fcs_err, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, xfr_hint_trig, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, path_reset, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rx, reset_counter, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(dma, rx_requested, 20, "%u");
-DEBUGFS_FWSTATS_FILE(dma, rx_errors, 20, "%u");
-DEBUGFS_FWSTATS_FILE(dma, tx_requested, 20, "%u");
-DEBUGFS_FWSTATS_FILE(dma, tx_errors, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(isr, cmd_cmplt, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, fiqs, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, rx_headers, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, rx_mem_overflow, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, rx_rdys, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, irqs, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, tx_procs, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, decrypt_done, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, dma0_done, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, dma1_done, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, tx_exch_complete, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, commands, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, rx_procs, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, hw_pm_mode_changes, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, host_acknowledges, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, pci_pm, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, wakeups, 20, "%u");
-DEBUGFS_FWSTATS_FILE(isr, low_rssi, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(wep, addr_key_count, 20, "%u");
-DEBUGFS_FWSTATS_FILE(wep, default_key_count, 20, "%u");
-/* skipping wep.reserved */
-DEBUGFS_FWSTATS_FILE(wep, key_not_found, 20, "%u");
-DEBUGFS_FWSTATS_FILE(wep, decrypt_fail, 20, "%u");
-DEBUGFS_FWSTATS_FILE(wep, packets, 20, "%u");
-DEBUGFS_FWSTATS_FILE(wep, interrupt, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(pwr, ps_enter, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, elp_enter, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, missing_bcns, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, wake_on_host, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, wake_on_timer_exp, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, tx_with_ps, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, tx_without_ps, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, rcvd_beacons, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, power_save_off, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, enable_ps, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, disable_ps, 20, "%u");
-DEBUGFS_FWSTATS_FILE(pwr, fix_tsf_ps, 20, "%u");
-/* skipping cont_miss_bcns_spread for now */
-DEBUGFS_FWSTATS_FILE(pwr, rcvd_awake_beacons, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(mic, rx_pkts, 20, "%u");
-DEBUGFS_FWSTATS_FILE(mic, calc_failure, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(aes, encrypt_fail, 20, "%u");
-DEBUGFS_FWSTATS_FILE(aes, decrypt_fail, 20, "%u");
-DEBUGFS_FWSTATS_FILE(aes, encrypt_packets, 20, "%u");
-DEBUGFS_FWSTATS_FILE(aes, decrypt_packets, 20, "%u");
-DEBUGFS_FWSTATS_FILE(aes, encrypt_interrupt, 20, "%u");
-DEBUGFS_FWSTATS_FILE(aes, decrypt_interrupt, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(event, heart_beat, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, calibration, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, rx_mismatch, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, rx_mem_empty, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, rx_pool, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, oom_late, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, phy_transmit_error, 20, "%u");
-DEBUGFS_FWSTATS_FILE(event, tx_stuck, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(ps, pspoll_timeouts, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, upsd_timeouts, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, upsd_max_sptime, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, upsd_max_apturn, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, pspoll_max_apturn, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, pspoll_utilization, 20, "%u");
-DEBUGFS_FWSTATS_FILE(ps, upsd_utilization, 20, "%u");
-
-DEBUGFS_FWSTATS_FILE(rxpipe, rx_prep_beacon_drop, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rxpipe, descr_host_int_trig_rx_data, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rxpipe, beacon_buffer_thres_host_int_trig_rx_data,
-		     20, "%u");
-DEBUGFS_FWSTATS_FILE(rxpipe, missed_beacon_host_int_trig_rx_data, 20, "%u");
-DEBUGFS_FWSTATS_FILE(rxpipe, tx_xfr_host_int_trig_rx_data, 20, "%u");
-
-DEBUGFS_READONLY_FILE(retry_count, 20, "%u", wl->stats.retry_count);
-DEBUGFS_READONLY_FILE(excessive_retries, 20, "%u",
-		      wl->stats.excessive_retries);
-
-static ssize_t tx_queue_len_read(struct file *file, char __user *userbuf,
-				 size_t count, loff_t *ppos)
-{
-	struct wl1271 *wl = file->private_data;
-	u32 queue_len;
-	char buf[20];
-	int res;
-
-	queue_len = skb_queue_len(&wl->tx_queue);
-
-	res = scnprintf(buf, sizeof(buf), "%u\n", queue_len);
-	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
-}
-
-static const struct file_operations tx_queue_len_ops = {
-	.read = tx_queue_len_read,
-	.open = wl1271_open_file_generic,
-	.llseek = default_llseek,
-};
-
-static ssize_t gpio_power_read(struct file *file, char __user *user_buf,
-			  size_t count, loff_t *ppos)
-{
-	struct wl1271 *wl = file->private_data;
-	bool state = test_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
-
-	int res;
-	char buf[10];
-
-	res = scnprintf(buf, sizeof(buf), "%d\n", state);
-
-	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
-}
-
-static ssize_t gpio_power_write(struct file *file,
-			   const char __user *user_buf,
-			   size_t count, loff_t *ppos)
-{
-	struct wl1271 *wl = file->private_data;
-	char buf[10];
-	size_t len;
-	unsigned long value;
-	int ret;
-
-	mutex_lock(&wl->mutex);
-
-	len = min(count, sizeof(buf) - 1);
-	if (copy_from_user(buf, user_buf, len)) {
-		ret = -EFAULT;
-		goto out;
-	}
-	buf[len] = '\0';
-
-	ret = strict_strtoul(buf, 0, &value);
-	if (ret < 0) {
-		wl1271_warning("illegal value in gpio_power");
-		goto out;
-	}
-
-	if (value)
-		wl1271_power_on(wl);
-	else
-		wl1271_power_off(wl);
-
-out:
-	mutex_unlock(&wl->mutex);
-	return count;
-}
-
-static const struct file_operations gpio_power_ops = {
-	.read = gpio_power_read,
-	.write = gpio_power_write,
-	.open = wl1271_open_file_generic,
-	.llseek = default_llseek,
-};
-
-static void wl1271_debugfs_delete_files(struct wl1271 *wl)
-{
-	DEBUGFS_FWSTATS_DEL(tx, internal_desc_overflow);
-
-	DEBUGFS_FWSTATS_DEL(rx, out_of_mem);
-	DEBUGFS_FWSTATS_DEL(rx, hdr_overflow);
-	DEBUGFS_FWSTATS_DEL(rx, hw_stuck);
-	DEBUGFS_FWSTATS_DEL(rx, dropped);
-	DEBUGFS_FWSTATS_DEL(rx, fcs_err);
-	DEBUGFS_FWSTATS_DEL(rx, xfr_hint_trig);
-	DEBUGFS_FWSTATS_DEL(rx, path_reset);
-	DEBUGFS_FWSTATS_DEL(rx, reset_counter);
-
-	DEBUGFS_FWSTATS_DEL(dma, rx_requested);
-	DEBUGFS_FWSTATS_DEL(dma, rx_errors);
-	DEBUGFS_FWSTATS_DEL(dma, tx_requested);
-	DEBUGFS_FWSTATS_DEL(dma, tx_errors);
-
-	DEBUGFS_FWSTATS_DEL(isr, cmd_cmplt);
-	DEBUGFS_FWSTATS_DEL(isr, fiqs);
-	DEBUGFS_FWSTATS_DEL(isr, rx_headers);
-	DEBUGFS_FWSTATS_DEL(isr, rx_mem_overflow);
-	DEBUGFS_FWSTATS_DEL(isr, rx_rdys);
-	DEBUGFS_FWSTATS_DEL(isr, irqs);
-	DEBUGFS_FWSTATS_DEL(isr, tx_procs);
-	DEBUGFS_FWSTATS_DEL(isr, decrypt_done);
-	DEBUGFS_FWSTATS_DEL(isr, dma0_done);
-	DEBUGFS_FWSTATS_DEL(isr, dma1_done);
-	DEBUGFS_FWSTATS_DEL(isr, tx_exch_complete);
-	DEBUGFS_FWSTATS_DEL(isr, commands);
-	DEBUGFS_FWSTATS_DEL(isr, rx_procs);
-	DEBUGFS_FWSTATS_DEL(isr, hw_pm_mode_changes);
-	DEBUGFS_FWSTATS_DEL(isr, host_acknowledges);
-	DEBUGFS_FWSTATS_DEL(isr, pci_pm);
-	DEBUGFS_FWSTATS_DEL(isr, wakeups);
-	DEBUGFS_FWSTATS_DEL(isr, low_rssi);
-
-	DEBUGFS_FWSTATS_DEL(wep, addr_key_count);
-	DEBUGFS_FWSTATS_DEL(wep, default_key_count);
-	/* skipping wep.reserved */
-	DEBUGFS_FWSTATS_DEL(wep, key_not_found);
-	DEBUGFS_FWSTATS_DEL(wep, decrypt_fail);
-	DEBUGFS_FWSTATS_DEL(wep, packets);
-	DEBUGFS_FWSTATS_DEL(wep, interrupt);
-
-	DEBUGFS_FWSTATS_DEL(pwr, ps_enter);
-	DEBUGFS_FWSTATS_DEL(pwr, elp_enter);
-	DEBUGFS_FWSTATS_DEL(pwr, missing_bcns);
-	DEBUGFS_FWSTATS_DEL(pwr, wake_on_host);
-	DEBUGFS_FWSTATS_DEL(pwr, wake_on_timer_exp);
-	DEBUGFS_FWSTATS_DEL(pwr, tx_with_ps);
-	DEBUGFS_FWSTATS_DEL(pwr, tx_without_ps);
-	DEBUGFS_FWSTATS_DEL(pwr, rcvd_beacons);
-	DEBUGFS_FWSTATS_DEL(pwr, power_save_off);
-	DEBUGFS_FWSTATS_DEL(pwr, enable_ps);
-	DEBUGFS_FWSTATS_DEL(pwr, disable_ps);
-	DEBUGFS_FWSTATS_DEL(pwr, fix_tsf_ps);
-	/* skipping cont_miss_bcns_spread for now */
-	DEBUGFS_FWSTATS_DEL(pwr, rcvd_awake_beacons);
-
-	DEBUGFS_FWSTATS_DEL(mic, rx_pkts);
-	DEBUGFS_FWSTATS_DEL(mic, calc_failure);
-
-	DEBUGFS_FWSTATS_DEL(aes, encrypt_fail);
-	DEBUGFS_FWSTATS_DEL(aes, decrypt_fail);
-	DEBUGFS_FWSTATS_DEL(aes, encrypt_packets);
-	DEBUGFS_FWSTATS_DEL(aes, decrypt_packets);
-	DEBUGFS_FWSTATS_DEL(aes, encrypt_interrupt);
-	DEBUGFS_FWSTATS_DEL(aes, decrypt_interrupt);
-
-	DEBUGFS_FWSTATS_DEL(event, heart_beat);
-	DEBUGFS_FWSTATS_DEL(event, calibration);
-	DEBUGFS_FWSTATS_DEL(event, rx_mismatch);
-	DEBUGFS_FWSTATS_DEL(event, rx_mem_empty);
-	DEBUGFS_FWSTATS_DEL(event, rx_pool);
-	DEBUGFS_FWSTATS_DEL(event, oom_late);
-	DEBUGFS_FWSTATS_DEL(event, phy_transmit_error);
-	DEBUGFS_FWSTATS_DEL(event, tx_stuck);
-
-	DEBUGFS_FWSTATS_DEL(ps, pspoll_timeouts);
-	DEBUGFS_FWSTATS_DEL(ps, upsd_timeouts);
-	DEBUGFS_FWSTATS_DEL(ps, upsd_max_sptime);
-	DEBUGFS_FWSTATS_DEL(ps, upsd_max_apturn);
-	DEBUGFS_FWSTATS_DEL(ps, pspoll_max_apturn);
-	DEBUGFS_FWSTATS_DEL(ps, pspoll_utilization);
-	DEBUGFS_FWSTATS_DEL(ps, upsd_utilization);
-
-	DEBUGFS_FWSTATS_DEL(rxpipe, rx_prep_beacon_drop);
-	DEBUGFS_FWSTATS_DEL(rxpipe, descr_host_int_trig_rx_data);
-	DEBUGFS_FWSTATS_DEL(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
-	DEBUGFS_FWSTATS_DEL(rxpipe, missed_beacon_host_int_trig_rx_data);
-	DEBUGFS_FWSTATS_DEL(rxpipe, tx_xfr_host_int_trig_rx_data);
-
-	DEBUGFS_DEL(tx_queue_len);
-	DEBUGFS_DEL(retry_count);
-	DEBUGFS_DEL(excessive_retries);
-
-	DEBUGFS_DEL(gpio_power);
-}
-
-static int wl1271_debugfs_add_files(struct wl1271 *wl)
-{
-	int ret = 0;
-
-	DEBUGFS_FWSTATS_ADD(tx, internal_desc_overflow);
-
-	DEBUGFS_FWSTATS_ADD(rx, out_of_mem);
-	DEBUGFS_FWSTATS_ADD(rx, hdr_overflow);
-	DEBUGFS_FWSTATS_ADD(rx, hw_stuck);
-	DEBUGFS_FWSTATS_ADD(rx, dropped);
-	DEBUGFS_FWSTATS_ADD(rx, fcs_err);
-	DEBUGFS_FWSTATS_ADD(rx, xfr_hint_trig);
-	DEBUGFS_FWSTATS_ADD(rx, path_reset);
-	DEBUGFS_FWSTATS_ADD(rx, reset_counter);
-
-	DEBUGFS_FWSTATS_ADD(dma, rx_requested);
-	DEBUGFS_FWSTATS_ADD(dma, rx_errors);
-	DEBUGFS_FWSTATS_ADD(dma, tx_requested);
-	DEBUGFS_FWSTATS_ADD(dma, tx_errors);
-
-	DEBUGFS_FWSTATS_ADD(isr, cmd_cmplt);
-	DEBUGFS_FWSTATS_ADD(isr, fiqs);
-	DEBUGFS_FWSTATS_ADD(isr, rx_headers);
-	DEBUGFS_FWSTATS_ADD(isr, rx_mem_overflow);
-	DEBUGFS_FWSTATS_ADD(isr, rx_rdys);
-	DEBUGFS_FWSTATS_ADD(isr, irqs);
-	DEBUGFS_FWSTATS_ADD(isr, tx_procs);
-	DEBUGFS_FWSTATS_ADD(isr, decrypt_done);
-	DEBUGFS_FWSTATS_ADD(isr, dma0_done);
-	DEBUGFS_FWSTATS_ADD(isr, dma1_done);
-	DEBUGFS_FWSTATS_ADD(isr, tx_exch_complete);
-	DEBUGFS_FWSTATS_ADD(isr, commands);
-	DEBUGFS_FWSTATS_ADD(isr, rx_procs);
-	DEBUGFS_FWSTATS_ADD(isr, hw_pm_mode_changes);
-	DEBUGFS_FWSTATS_ADD(isr, host_acknowledges);
-	DEBUGFS_FWSTATS_ADD(isr, pci_pm);
-	DEBUGFS_FWSTATS_ADD(isr, wakeups);
-	DEBUGFS_FWSTATS_ADD(isr, low_rssi);
-
-	DEBUGFS_FWSTATS_ADD(wep, addr_key_count);
-	DEBUGFS_FWSTATS_ADD(wep, default_key_count);
-	/* skipping wep.reserved */
-	DEBUGFS_FWSTATS_ADD(wep, key_not_found);
-	DEBUGFS_FWSTATS_ADD(wep, decrypt_fail);
-	DEBUGFS_FWSTATS_ADD(wep, packets);
-	DEBUGFS_FWSTATS_ADD(wep, interrupt);
-
-	DEBUGFS_FWSTATS_ADD(pwr, ps_enter);
-	DEBUGFS_FWSTATS_ADD(pwr, elp_enter);
-	DEBUGFS_FWSTATS_ADD(pwr, missing_bcns);
-	DEBUGFS_FWSTATS_ADD(pwr, wake_on_host);
-	DEBUGFS_FWSTATS_ADD(pwr, wake_on_timer_exp);
-	DEBUGFS_FWSTATS_ADD(pwr, tx_with_ps);
-	DEBUGFS_FWSTATS_ADD(pwr, tx_without_ps);
-	DEBUGFS_FWSTATS_ADD(pwr, rcvd_beacons);
-	DEBUGFS_FWSTATS_ADD(pwr, power_save_off);
-	DEBUGFS_FWSTATS_ADD(pwr, enable_ps);
-	DEBUGFS_FWSTATS_ADD(pwr, disable_ps);
-	DEBUGFS_FWSTATS_ADD(pwr, fix_tsf_ps);
-	/* skipping cont_miss_bcns_spread for now */
-	DEBUGFS_FWSTATS_ADD(pwr, rcvd_awake_beacons);
-
-	DEBUGFS_FWSTATS_ADD(mic, rx_pkts);
-	DEBUGFS_FWSTATS_ADD(mic, calc_failure);
-
-	DEBUGFS_FWSTATS_ADD(aes, encrypt_fail);
-	DEBUGFS_FWSTATS_ADD(aes, decrypt_fail);
-	DEBUGFS_FWSTATS_ADD(aes, encrypt_packets);
-	DEBUGFS_FWSTATS_ADD(aes, decrypt_packets);
-	DEBUGFS_FWSTATS_ADD(aes, encrypt_interrupt);
-	DEBUGFS_FWSTATS_ADD(aes, decrypt_interrupt);
-
-	DEBUGFS_FWSTATS_ADD(event, heart_beat);
-	DEBUGFS_FWSTATS_ADD(event, calibration);
-	DEBUGFS_FWSTATS_ADD(event, rx_mismatch);
-	DEBUGFS_FWSTATS_ADD(event, rx_mem_empty);
-	DEBUGFS_FWSTATS_ADD(event, rx_pool);
-	DEBUGFS_FWSTATS_ADD(event, oom_late);
-	DEBUGFS_FWSTATS_ADD(event, phy_transmit_error);
-	DEBUGFS_FWSTATS_ADD(event, tx_stuck);
-
-	DEBUGFS_FWSTATS_ADD(ps, pspoll_timeouts);
-	DEBUGFS_FWSTATS_ADD(ps, upsd_timeouts);
-	DEBUGFS_FWSTATS_ADD(ps, upsd_max_sptime);
-	DEBUGFS_FWSTATS_ADD(ps, upsd_max_apturn);
-	DEBUGFS_FWSTATS_ADD(ps, pspoll_max_apturn);
-	DEBUGFS_FWSTATS_ADD(ps, pspoll_utilization);
-	DEBUGFS_FWSTATS_ADD(ps, upsd_utilization);
-
-	DEBUGFS_FWSTATS_ADD(rxpipe, rx_prep_beacon_drop);
-	DEBUGFS_FWSTATS_ADD(rxpipe, descr_host_int_trig_rx_data);
-	DEBUGFS_FWSTATS_ADD(rxpipe, beacon_buffer_thres_host_int_trig_rx_data);
-	DEBUGFS_FWSTATS_ADD(rxpipe, missed_beacon_host_int_trig_rx_data);
-	DEBUGFS_FWSTATS_ADD(rxpipe, tx_xfr_host_int_trig_rx_data);
-
-	DEBUGFS_ADD(tx_queue_len, wl->debugfs.rootdir);
-	DEBUGFS_ADD(retry_count, wl->debugfs.rootdir);
-	DEBUGFS_ADD(excessive_retries, wl->debugfs.rootdir);
-
-	DEBUGFS_ADD(gpio_power, wl->debugfs.rootdir);
-
-out:
-	if (ret < 0)
-		wl1271_debugfs_delete_files(wl);
-
-	return ret;
-}
-
-void wl1271_debugfs_reset(struct wl1271 *wl)
-{
-	memset(wl->stats.fw_stats, 0, sizeof(*wl->stats.fw_stats));
-	wl->stats.retry_count = 0;
-	wl->stats.excessive_retries = 0;
-}
-
-int wl1271_debugfs_init(struct wl1271 *wl)
-{
-	int ret;
-
-	wl->debugfs.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL);
-
-	if (IS_ERR(wl->debugfs.rootdir)) {
-		ret = PTR_ERR(wl->debugfs.rootdir);
-		wl->debugfs.rootdir = NULL;
-		goto err;
-	}
-
-	wl->debugfs.fw_statistics = debugfs_create_dir("fw-statistics",
-						       wl->debugfs.rootdir);
-
-	if (IS_ERR(wl->debugfs.fw_statistics)) {
-		ret = PTR_ERR(wl->debugfs.fw_statistics);
-		wl->debugfs.fw_statistics = NULL;
-		goto err_root;
-	}
-
-	wl->stats.fw_stats = kzalloc(sizeof(*wl->stats.fw_stats),
-				      GFP_KERNEL);
-
-	if (!wl->stats.fw_stats) {
-		ret = -ENOMEM;
-		goto err_fw;
-	}
-
-	wl->stats.fw_stats_update = jiffies;
-
-	ret = wl1271_debugfs_add_files(wl);
-
-	if (ret < 0)
-		goto err_file;
-
-	return 0;
-
-err_file:
-	kfree(wl->stats.fw_stats);
-	wl->stats.fw_stats = NULL;
-
-err_fw:
-	debugfs_remove(wl->debugfs.fw_statistics);
-	wl->debugfs.fw_statistics = NULL;
-
-err_root:
-	debugfs_remove(wl->debugfs.rootdir);
-	wl->debugfs.rootdir = NULL;
-
-err:
-	return ret;
-}
-
-void wl1271_debugfs_exit(struct wl1271 *wl)
-{
-	wl1271_debugfs_delete_files(wl);
-
-	kfree(wl->stats.fw_stats);
-	wl->stats.fw_stats = NULL;
-
-	debugfs_remove(wl->debugfs.fw_statistics);
-	wl->debugfs.fw_statistics = NULL;
-
-	debugfs_remove(wl->debugfs.rootdir);
-	wl->debugfs.rootdir = NULL;
-
-}
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 8a4cd763e5a..ce3d31f98c5 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -22,8 +22,8 @@
  *
  */
 
-#ifndef __WL1271_H__
-#define __WL1271_H__
+#ifndef __WL12XX_H__
+#define __WL12XX_H__
 
 #include <linux/mutex.h>
 #include <linux/completion.h>
@@ -32,8 +32,8 @@
 #include <linux/bitops.h>
 #include <net/mac80211.h>
 
-#include "wl1271_conf.h"
-#include "wl1271_ini.h"
+#include "conf.h"
+#include "ini.h"
 
 #define DRIVER_NAME "wl1271"
 #define DRIVER_PREFIX DRIVER_NAME ": "
@@ -60,31 +60,32 @@ enum {
 	DEBUG_ALL	= ~0,
 };
 
-#define DEBUG_LEVEL (DEBUG_NONE)
+extern u32 wl12xx_debug_level;
 
 #define DEBUG_DUMP_LIMIT 1024
 
 #define wl1271_error(fmt, arg...) \
-	printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
+	pr_err(DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
 
 #define wl1271_warning(fmt, arg...) \
-	printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
+	pr_warning(DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
 
 #define wl1271_notice(fmt, arg...) \
-	printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
+	pr_info(DRIVER_PREFIX fmt "\n", ##arg)
 
 #define wl1271_info(fmt, arg...) \
-	printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg)
+	pr_info(DRIVER_PREFIX fmt "\n", ##arg)
 
 #define wl1271_debug(level, fmt, arg...) \
 	do { \
-		if (level & DEBUG_LEVEL) \
-			printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
+		if (level & wl12xx_debug_level) \
+			pr_debug(DRIVER_PREFIX fmt "\n", ##arg); \
 	} while (0)
 
+/* TODO: use pr_debug_hex_dump when it will be available */
 #define wl1271_dump(level, prefix, buf, len)	\
 	do { \
-		if (level & DEBUG_LEVEL) \
+		if (level & wl12xx_debug_level) \
 			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
 				       DUMP_PREFIX_OFFSET, 16, 1,	\
 				       buf,				\
@@ -94,7 +95,7 @@ enum {
 
 #define wl1271_dump_ascii(level, prefix, buf, len)	\
 	do { \
-		if (level & DEBUG_LEVEL) \
+		if (level & wl12xx_debug_level) \
 			print_hex_dump(KERN_DEBUG, DRIVER_PREFIX prefix, \
 				       DUMP_PREFIX_OFFSET, 16, 1,	\
 				       buf,				\
@@ -174,108 +175,6 @@ struct wl1271_stats {
 	unsigned int excessive_retries;
 };
 
-struct wl1271_debugfs {
-	struct dentry *rootdir;
-	struct dentry *fw_statistics;
-
-	struct dentry *tx_internal_desc_overflow;
-
-	struct dentry *rx_out_of_mem;
-	struct dentry *rx_hdr_overflow;
-	struct dentry *rx_hw_stuck;
-	struct dentry *rx_dropped;
-	struct dentry *rx_fcs_err;
-	struct dentry *rx_xfr_hint_trig;
-	struct dentry *rx_path_reset;
-	struct dentry *rx_reset_counter;
-
-	struct dentry *dma_rx_requested;
-	struct dentry *dma_rx_errors;
-	struct dentry *dma_tx_requested;
-	struct dentry *dma_tx_errors;
-
-	struct dentry *isr_cmd_cmplt;
-	struct dentry *isr_fiqs;
-	struct dentry *isr_rx_headers;
-	struct dentry *isr_rx_mem_overflow;
-	struct dentry *isr_rx_rdys;
-	struct dentry *isr_irqs;
-	struct dentry *isr_tx_procs;
-	struct dentry *isr_decrypt_done;
-	struct dentry *isr_dma0_done;
-	struct dentry *isr_dma1_done;
-	struct dentry *isr_tx_exch_complete;
-	struct dentry *isr_commands;
-	struct dentry *isr_rx_procs;
-	struct dentry *isr_hw_pm_mode_changes;
-	struct dentry *isr_host_acknowledges;
-	struct dentry *isr_pci_pm;
-	struct dentry *isr_wakeups;
-	struct dentry *isr_low_rssi;
-
-	struct dentry *wep_addr_key_count;
-	struct dentry *wep_default_key_count;
-	/* skipping wep.reserved */
-	struct dentry *wep_key_not_found;
-	struct dentry *wep_decrypt_fail;
-	struct dentry *wep_packets;
-	struct dentry *wep_interrupt;
-
-	struct dentry *pwr_ps_enter;
-	struct dentry *pwr_elp_enter;
-	struct dentry *pwr_missing_bcns;
-	struct dentry *pwr_wake_on_host;
-	struct dentry *pwr_wake_on_timer_exp;
-	struct dentry *pwr_tx_with_ps;
-	struct dentry *pwr_tx_without_ps;
-	struct dentry *pwr_rcvd_beacons;
-	struct dentry *pwr_power_save_off;
-	struct dentry *pwr_enable_ps;
-	struct dentry *pwr_disable_ps;
-	struct dentry *pwr_fix_tsf_ps;
-	/* skipping cont_miss_bcns_spread for now */
-	struct dentry *pwr_rcvd_awake_beacons;
-
-	struct dentry *mic_rx_pkts;
-	struct dentry *mic_calc_failure;
-
-	struct dentry *aes_encrypt_fail;
-	struct dentry *aes_decrypt_fail;
-	struct dentry *aes_encrypt_packets;
-	struct dentry *aes_decrypt_packets;
-	struct dentry *aes_encrypt_interrupt;
-	struct dentry *aes_decrypt_interrupt;
-
-	struct dentry *event_heart_beat;
-	struct dentry *event_calibration;
-	struct dentry *event_rx_mismatch;
-	struct dentry *event_rx_mem_empty;
-	struct dentry *event_rx_pool;
-	struct dentry *event_oom_late;
-	struct dentry *event_phy_transmit_error;
-	struct dentry *event_tx_stuck;
-
-	struct dentry *ps_pspoll_timeouts;
-	struct dentry *ps_upsd_timeouts;
-	struct dentry *ps_upsd_max_sptime;
-	struct dentry *ps_upsd_max_apturn;
-	struct dentry *ps_pspoll_max_apturn;
-	struct dentry *ps_pspoll_utilization;
-	struct dentry *ps_upsd_utilization;
-
-	struct dentry *rxpipe_rx_prep_beacon_drop;
-	struct dentry *rxpipe_descr_host_int_trig_rx_data;
-	struct dentry *rxpipe_beacon_buffer_thres_host_int_trig_rx_data;
-	struct dentry *rxpipe_missed_beacon_host_int_trig_rx_data;
-	struct dentry *rxpipe_tx_xfr_host_int_trig_rx_data;
-
-	struct dentry *tx_queue_len;
-
-	struct dentry *retry_count;
-	struct dentry *excessive_retries;
-	struct dentry *gpio_power;
-};
-
 #define NUM_TX_QUEUES              4
 #define NUM_RX_PKT_DESC            8
 
@@ -351,6 +250,7 @@ struct wl1271 {
 #define WL1271_FLAG_IDLE_REQUESTED    (11)
 #define WL1271_FLAG_PSPOLL_FAILURE    (12)
 #define WL1271_FLAG_STA_STATE_SENT    (13)
+#define WL1271_FLAG_FW_TX_BUSY        (14)
 	unsigned long flags;
 
 	struct wl1271_partition_set part;
@@ -392,11 +292,13 @@ struct wl1271 {
 	int session_counter;
 
 	/* Frames scheduled for transmission, not handled yet */
-	struct sk_buff_head tx_queue;
+	struct sk_buff_head tx_queue[NUM_TX_QUEUES];
+	int tx_queue_count;
 
 	struct work_struct tx_work;
 
 	/* Pending TX frames */
+	unsigned long tx_frames_map[BITS_TO_LONGS(ACX_TX_DESCRIPTORS)];
 	struct sk_buff *tx_frames[ACX_TX_DESCRIPTORS];
 	int tx_frames_cnt;
 
@@ -429,10 +331,18 @@ struct wl1271 {
 	struct wl1271_scan scan;
 	struct delayed_work scan_complete_work;
 
+	/* probe-req template for the current AP */
+	struct sk_buff *probereq;
+
 	/* Our association ID */
 	u16 aid;
 
-	/* currently configured rate set */
+	/*
+	 * currently configured rate set:
+	 *	bits  0-15 - 802.11abg rates
+	 *	bits 16-23 - 802.11n   MCS index mask
+	 * support only 1 stream, thus only 8 bits for the MCS rates (0-7).
+	 */
 	u32 sta_rate_set;
 	u32 basic_rate_set;
 	u32 basic_rate;
@@ -468,7 +378,7 @@ struct wl1271 {
 	int last_rssi_event;
 
 	struct wl1271_stats stats;
-	struct wl1271_debugfs debugfs;
+	struct dentry *rootdir;
 
 	__le32 buffer_32;
 	u32 buffer_cmd;
@@ -509,4 +419,8 @@ int wl1271_plt_stop(struct wl1271 *wl);
 #define WL1271_PRE_POWER_ON_SLEEP 20 /* in miliseconds */
 #define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
 
+/* Macros to handle wl1271.sta_rate_set */
+#define HW_BG_RATES_MASK	0xffff
+#define HW_HT_RATES_OFFSET	16
+
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl12xx_80211.h b/drivers/net/wireless/wl12xx/wl12xx_80211.h
index 18462802721..be21032f4dc 100644
--- a/drivers/net/wireless/wl12xx/wl12xx_80211.h
+++ b/drivers/net/wireless/wl12xx/wl12xx_80211.h
@@ -2,6 +2,7 @@
 #define __WL12XX_80211_H__
 
 #include <linux/if_ether.h>	/* ETH_ALEN */
+#include <linux/if_arp.h>
 
 /* RATES */
 #define IEEE80211_CCK_RATE_1MB		        0x02
@@ -133,11 +134,17 @@ struct wl12xx_qos_null_data_template {
 	__le16 qos_ctl;
 } __packed;
 
-struct wl12xx_probe_req_template {
-	struct ieee80211_header header;
-	struct wl12xx_ie_ssid ssid;
-	struct wl12xx_ie_rates rates;
-	struct wl12xx_ie_rates ext_rates;
+struct wl12xx_arp_rsp_template {
+	struct ieee80211_hdr_3addr hdr;
+
+	u8 llc_hdr[sizeof(rfc1042_header)];
+	u16 llc_type;
+
+	struct arphdr arp_hdr;
+	u8 sender_hw[ETH_ALEN];
+	u32 sender_ip;
+	u8 target_hw[ETH_ALEN];
+	u32 target_ip;
 } __packed;
 
 
diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c
index 390d77f762c..415eec401e2 100644
--- a/drivers/net/wireless/zd1201.c
+++ b/drivers/net/wireless/zd1201.c
@@ -30,6 +30,7 @@ static struct usb_device_id zd1201_table[] = {
 	{USB_DEVICE(0x0ace, 0x1201)}, /* ZyDAS ZD1201 Wireless USB Adapter */
 	{USB_DEVICE(0x050d, 0x6051)}, /* Belkin F5D6051 usb  adapter */
 	{USB_DEVICE(0x0db0, 0x6823)}, /* MSI UB11B usb  adapter */
+	{USB_DEVICE(0x1044, 0x8004)}, /* Gigabyte GN-WLBZ101 */
 	{USB_DEVICE(0x1044, 0x8005)}, /* GIGABYTE GN-WLBZ201 usb adapter */
 	{}
 };
@@ -1829,7 +1830,7 @@ err_zd:
 
 static void zd1201_disconnect(struct usb_interface *interface)
 {
-	struct zd1201 *zd=(struct zd1201 *)usb_get_intfdata(interface);
+	struct zd1201 *zd = usb_get_intfdata(interface);
 	struct hlist_node *node, *node2;
 	struct zd1201_frag *frag;
 
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 87a95bcfee5..6a9b66051cf 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -117,6 +117,7 @@ int zd_ioread32v_locked(struct zd_chip *chip, u32 *values, const zd_addr_t *addr
 
 	/* Allocate a single memory block for values and addresses. */
 	count16 = 2*count;
+	/* zd_addr_t is __nocast, so the kmalloc needs an explicit cast */
 	a16 = (zd_addr_t *) kmalloc(count16 * (sizeof(zd_addr_t) + sizeof(u16)),
 		                   GFP_KERNEL);
 	if (!a16) {
@@ -1448,7 +1449,7 @@ int zd_rfwritev_locked(struct zd_chip *chip,
  */
 int zd_rfwrite_cr_locked(struct zd_chip *chip, u32 value)
 {
-	struct zd_ioreq16 ioreqs[] = {
+	const struct zd_ioreq16 ioreqs[] = {
 		{ CR244, (value >> 16) & 0xff },
 		{ CR243, (value >>  8) & 0xff },
 		{ CR242,  value        & 0xff },
@@ -1475,7 +1476,7 @@ int zd_rfwritev_cr_locked(struct zd_chip *chip,
 int zd_chip_set_multicast_hash(struct zd_chip *chip,
 	                       struct zd_mc_hash *hash)
 {
-	struct zd_ioreq32 ioreqs[] = {
+	const struct zd_ioreq32 ioreqs[] = {
 		{ CR_GROUP_HASH_P1, hash->low },
 		{ CR_GROUP_HASH_P2, hash->high },
 	};
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 43307bd42a6..6107304cb94 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -1207,7 +1207,6 @@ static void housekeeping_enable(struct zd_mac *mac)
 static void housekeeping_disable(struct zd_mac *mac)
 {
 	dev_dbg_f(zd_mac_dev(mac), "\n");
-	cancel_rearming_delayed_workqueue(zd_workqueue,
-		&mac->housekeeping.link_led_work);
+	cancel_delayed_work_sync(&mac->housekeeping.link_led_work);
 	zd_chip_control_leds(&mac->chip, ZD_LED_OFF);
 }
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 818e1480ca9..06041cb1c42 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -55,6 +55,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x129b, 0x1666), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x13b1, 0x001e), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x1435, 0x0711), .driver_info = DEVICE_ZD1211 },
+	{ USB_DEVICE(0x14ea, 0xab10), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x14ea, 0xab13), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x157e, 0x300a), .driver_info = DEVICE_ZD1211 },
 	{ USB_DEVICE(0x157e, 0x300b), .driver_info = DEVICE_ZD1211 },
@@ -92,6 +93,7 @@ static struct usb_device_id usb_ids[] = {
 	{ USB_DEVICE(0x157e, 0x300d), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
 	{ USB_DEVICE(0x2019, 0x5303), .driver_info = DEVICE_ZD1211B },
+	{ USB_DEVICE(0x2019, 0xed01), .driver_info = DEVICE_ZD1211B },
 	/* "Driverless" devices that need ejecting */
 	{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
 	{ USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER },
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 458bb57914a..cdbeec9f83e 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -66,8 +66,8 @@ struct netfront_cb {
 
 #define GRANT_INVALID_REF	0
 
-#define NET_TX_RING_SIZE __RING_SIZE((struct xen_netif_tx_sring *)0, PAGE_SIZE)
-#define NET_RX_RING_SIZE __RING_SIZE((struct xen_netif_rx_sring *)0, PAGE_SIZE)
+#define NET_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
+#define NET_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
 #define TX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256)
 
 struct netfront_info {
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 14f0955eca6..de6c3086d23 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -515,7 +515,7 @@ static void xemaclite_update_address(struct net_local *drvdata,
  */
 static int xemaclite_set_mac_address(struct net_device *dev, void *address)
 {
-	struct net_local *lp = (struct net_local *) netdev_priv(dev);
+	struct net_local *lp = netdev_priv(dev);
 	struct sockaddr *addr = address;
 
 	if (netif_running(dev))
@@ -534,7 +534,7 @@ static int xemaclite_set_mac_address(struct net_device *dev, void *address)
  */
 static void xemaclite_tx_timeout(struct net_device *dev)
 {
-	struct net_local *lp = (struct net_local *) netdev_priv(dev);
+	struct net_local *lp = netdev_priv(dev);
 	unsigned long flags;
 
 	dev_err(&lp->ndev->dev, "Exceeded transmit timeout of %lu ms\n",
@@ -578,7 +578,7 @@ static void xemaclite_tx_timeout(struct net_device *dev)
  */
 static void xemaclite_tx_handler(struct net_device *dev)
 {
-	struct net_local *lp = (struct net_local *) netdev_priv(dev);
+	struct net_local *lp = netdev_priv(dev);
 
 	dev->stats.tx_packets++;
 	if (lp->deferred_skb) {
@@ -605,7 +605,7 @@ static void xemaclite_tx_handler(struct net_device *dev)
  */
 static void xemaclite_rx_handler(struct net_device *dev)
 {
-	struct net_local *lp = (struct net_local *) netdev_priv(dev);
+	struct net_local *lp = netdev_priv(dev);
 	struct sk_buff *skb;
 	unsigned int align;
 	u32 len;
@@ -661,7 +661,7 @@ static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
 {
 	bool tx_complete = 0;
 	struct net_device *dev = dev_id;
-	struct net_local *lp = (struct net_local *) netdev_priv(dev);
+	struct net_local *lp = netdev_priv(dev);
 	void __iomem *base_addr = lp->base_addr;
 	u32 tx_status;
 
@@ -918,7 +918,7 @@ void xemaclite_adjust_link(struct net_device *ndev)
  */
 static int xemaclite_open(struct net_device *dev)
 {
-	struct net_local *lp = (struct net_local *) netdev_priv(dev);
+	struct net_local *lp = netdev_priv(dev);
 	int retval;
 
 	/* Just to be safe, stop the device first */
@@ -987,7 +987,7 @@ static int xemaclite_open(struct net_device *dev)
  */
 static int xemaclite_close(struct net_device *dev)
 {
-	struct net_local *lp = (struct net_local *) netdev_priv(dev);
+	struct net_local *lp = netdev_priv(dev);
 
 	netif_stop_queue(dev);
 	xemaclite_disable_interrupts(lp);
@@ -1001,21 +1001,6 @@ static int xemaclite_close(struct net_device *dev)
 }
 
 /**
- * xemaclite_get_stats - Get the stats for the net_device
- * @dev:	Pointer to the network device
- *
- * This function returns the address of the 'net_device_stats' structure for the
- * given network device. This structure holds usage statistics for the network
- * device.
- *
- * Return:	Pointer to the net_device_stats structure.
- */
-static struct net_device_stats *xemaclite_get_stats(struct net_device *dev)
-{
-	return &dev->stats;
-}
-
-/**
  * xemaclite_send - Transmit a frame
  * @orig_skb:	Pointer to the socket buffer to be transmitted
  * @dev:	Pointer to the network device
@@ -1031,7 +1016,7 @@ static struct net_device_stats *xemaclite_get_stats(struct net_device *dev)
  */
 static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
 {
-	struct net_local *lp = (struct net_local *) netdev_priv(dev);
+	struct net_local *lp = netdev_priv(dev);
 	struct sk_buff *new_skb;
 	unsigned int len;
 	unsigned long flags;
@@ -1068,7 +1053,7 @@ static int xemaclite_send(struct sk_buff *orig_skb, struct net_device *dev)
 static void xemaclite_remove_ndev(struct net_device *ndev)
 {
 	if (ndev) {
-		struct net_local *lp = (struct net_local *) netdev_priv(ndev);
+		struct net_local *lp = netdev_priv(ndev);
 
 		if (lp->base_addr)
 			iounmap((void __iomem __force *) (lp->base_addr));
@@ -1245,7 +1230,7 @@ static int __devexit xemaclite_of_remove(struct platform_device *of_dev)
 	struct device *dev = &of_dev->dev;
 	struct net_device *ndev = dev_get_drvdata(dev);
 
-	struct net_local *lp = (struct net_local *) netdev_priv(ndev);
+	struct net_local *lp = netdev_priv(ndev);
 
 	/* Un-register the mii_bus, if configured */
 	if (lp->has_mdio) {
@@ -1285,7 +1270,6 @@ static struct net_device_ops xemaclite_netdev_ops = {
 	.ndo_start_xmit		= xemaclite_send,
 	.ndo_set_mac_address	= xemaclite_set_mac_address,
 	.ndo_tx_timeout		= xemaclite_tx_timeout,
-	.ndo_get_stats		= xemaclite_get_stats,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = xemaclite_poll_controller,
 #endif
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index cd1b3dcd61d..ec47e22fa18 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -744,7 +744,7 @@ static int yellowfin_init_ring(struct net_device *dev)
 	}
 
 	for (i = 0; i < RX_RING_SIZE; i++) {
-		struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
+		struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz + 2);
 		yp->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
@@ -1157,7 +1157,7 @@ static int yellowfin_rx(struct net_device *dev)
 	for (; yp->cur_rx - yp->dirty_rx > 0; yp->dirty_rx++) {
 		entry = yp->dirty_rx % RX_RING_SIZE;
 		if (yp->rx_skbuff[entry] == NULL) {
-			struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz);
+			struct sk_buff *skb = dev_alloc_skb(yp->rx_buf_sz + 2);
 			if (skb == NULL)
 				break;				/* Better luck next round. */
 			yp->rx_skbuff[entry] = skb;
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index c85d3c7421f..f37fbeb66a4 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -61,7 +61,7 @@ void of_i2c_register_devices(struct i2c_adapter *adap)
 		info.of_node = of_node_get(node);
 		info.archdata = &dev_ad;
 
-		request_module("%s", info.type);
+		request_module("%s%s", I2C_MODULE_PREFIX, info.type);
 
 		result = i2c_new_device(adap, &info);
 		if (result == NULL) {
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index d9f51485bee..9383063d2b1 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -349,7 +349,6 @@ static struct irq_chip dino_interrupt_type = {
 	.name	= "GSC-PCI",
 	.unmask	= dino_unmask_irq,
 	.mask	= dino_mask_irq,
-	.ack	= no_ack_irq,
 };
 
 
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 1211974f55a..e860038b0b8 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -186,7 +186,6 @@ static struct irq_chip eisa_interrupt_type = {
 	.name	=	"EISA",
 	.unmask	=	eisa_unmask_irq,
 	.mask	=	eisa_mask_irq,
-	.ack	=	no_ack_irq,
 };
 
 static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
@@ -340,7 +339,7 @@ static int __init eisa_probe(struct parisc_device *dev)
 	setup_irq(2, &irq2_action);
 	for (i = 0; i < 16; i++) {
 		set_irq_chip_and_handler(i, &eisa_interrupt_type,
-			handle_level_irq);
+					 handle_simple_irq);
 	}
 	
 	EISA_bus = 1;
diff --git a/drivers/parisc/eisa_eeprom.c b/drivers/parisc/eisa_eeprom.c
index cce00ed81f3..af212c6a615 100644
--- a/drivers/parisc/eisa_eeprom.c
+++ b/drivers/parisc/eisa_eeprom.c
@@ -24,7 +24,6 @@
 #include <linux/kernel.h>
 #include <linux/miscdevice.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/fs.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index e605298e3ae..772b1939ac2 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -143,7 +143,6 @@ static struct irq_chip gsc_asic_interrupt_type = {
 	.name	=	"GSC-ASIC",
 	.unmask	=	gsc_asic_unmask_irq,
 	.mask	=	gsc_asic_mask_irq,
-	.ack	=	no_ack_irq,
 };
 
 int gsc_assign_irq(struct irq_chip *type, void *data)
@@ -153,7 +152,7 @@ int gsc_assign_irq(struct irq_chip *type, void *data)
 	if (irq > GSC_IRQ_MAX)
 		return NO_IRQ;
 
-	set_irq_chip_and_handler(irq, type, handle_level_irq);
+	set_irq_chip_and_handler(irq, type, handle_simple_irq);
 	set_irq_chip_data(irq, data);
 
 	return irq++;
diff --git a/drivers/parisc/iosapic.c b/drivers/parisc/iosapic.c
index a3120a09c43..0327894bf23 100644
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -669,6 +669,13 @@ printk("\n");
 	DBG(KERN_DEBUG "enable_irq(%d): eoi(%p, 0x%x)\n", irq,
 			vi->eoi_addr, vi->eoi_data);
 	iosapic_eoi(vi->eoi_addr, vi->eoi_data);
+}
+
+static void iosapic_eoi_irq(unsigned int irq)
+{
+	struct vector_info *vi = get_irq_chip_data(irq);
+
+	iosapic_eoi(vi->eoi_addr, vi->eoi_data);
 	cpu_eoi_irq(irq);
 }
 
@@ -705,6 +712,7 @@ static struct irq_chip iosapic_interrupt_type = {
 	.unmask	=	iosapic_unmask_irq,
 	.mask	=	iosapic_mask_irq,
 	.ack	=	cpu_ack_irq,
+	.eoi	=	iosapic_eoi_irq,
 #ifdef CONFIG_SMP
 	.set_affinity =	iosapic_set_affinity_irq,
 #endif
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 2350e8a86ee..f2f501e5b6a 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -64,6 +64,7 @@ static unsigned int led_diskio    __read_mostly = 1;
 static unsigned int led_lanrxtx   __read_mostly = 1;
 static char lcd_text[32]          __read_mostly;
 static char lcd_text_default[32]  __read_mostly;
+static int  lcd_no_led_support    __read_mostly = 0; /* KittyHawk doesn't support LED on its LCD */
 
 
 static struct workqueue_struct *led_wq;
@@ -115,7 +116,7 @@ lcd_info __attribute__((aligned(8))) __read_mostly =
 	.lcd_width =		16,
 	.lcd_cmd_reg_addr =	KITTYHAWK_LCD_CMD,
 	.lcd_data_reg_addr =	KITTYHAWK_LCD_DATA,
-	.min_cmd_delay =	40,
+	.min_cmd_delay =	80,
 	.reset_cmd1 =		0x80,
 	.reset_cmd2 =		0xc0,
 };
@@ -135,6 +136,9 @@ static int start_task(void)
 	/* Display the default text now */
 	if (led_type == LED_HASLCD) lcd_print( lcd_text_default );
 
+	/* KittyHawk has no LED support on its LCD */
+	if (lcd_no_led_support) return 0;
+
 	/* Create the work queue and queue the LED task */
 	led_wq = create_singlethread_workqueue("led_wq");	
 	queue_delayed_work(led_wq, &led_task, 0);
@@ -248,9 +252,13 @@ static int __init led_create_procfs(void)
 
 	proc_pdc_root = proc_mkdir("pdc", 0);
 	if (!proc_pdc_root) return -1;
-	ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
-				&led_proc_fops, (void *)LED_NOLCD); /* LED */
-	if (!ent) return -1;
+
+	if (!lcd_no_led_support)
+	{
+		ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
+					&led_proc_fops, (void *)LED_NOLCD); /* LED */
+		if (!ent) return -1;
+	}
 
 	if (led_type == LED_HASLCD)
 	{
@@ -692,6 +700,7 @@ int __init led_init(void)
 	case 0x58B:		/* KittyHawk DC2 100 (K200) */
 		printk(KERN_INFO "%s: KittyHawk-Machine (hversion 0x%x) found, "
 				"LED detection skipped.\n", __FILE__, CPU_HVERSION);
+		lcd_no_led_support = 1;
 		goto found;	/* use the preinitialized values of lcd_info */
 	}
 
diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 0846dafdfff..28241532c0f 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -323,7 +323,6 @@ static struct irq_chip superio_interrupt_type = {
 	.name	=	SUPERIO,
 	.unmask	=	superio_unmask_irq,
 	.mask	=	superio_mask_irq,
-	.ack =		no_ack_irq,
 };
 
 #ifdef DEBUG_SUPERIO_INIT
@@ -354,7 +353,7 @@ int superio_fixup_irq(struct pci_dev *pcidev)
 #endif
 
 	for (i = 0; i < 16; i++) {
-		set_irq_chip_and_handler(i, &superio_interrupt_type, handle_level_irq);
+		set_irq_chip_and_handler(i, &superio_interrupt_type, handle_simple_irq);
 	}
 
 	/*
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index f01e344cf4b..98e6fdf34d3 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
 obj-$(CONFIG_X86_VISWS) += setup-irq.o
 obj-$(CONFIG_MN10300) += setup-bus.o
 obj-$(CONFIG_MICROBLAZE) += setup-bus.o
+obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o
 
 #
 # ACPI Related PCI FW Functions
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 5624db8c9ad..69546e9213d 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -64,49 +64,6 @@ void pci_bus_remove_resources(struct pci_bus *bus)
 	}
 }
 
-/*
- * Find the highest-address bus resource below the cursor "res".  If the
- * cursor is NULL, return the highest resource.
- */
-static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
-						   unsigned int type,
-						   struct resource *res)
-{
-	struct resource *r, *prev = NULL;
-	int i;
-
-	pci_bus_for_each_resource(bus, r, i) {
-		if (!r)
-			continue;
-
-		if ((r->flags & IORESOURCE_TYPE_BITS) != type)
-			continue;
-
-		/* If this resource is at or past the cursor, skip it */
-		if (res) {
-			if (r == res)
-				continue;
-			if (r->end > res->end)
-				continue;
-			if (r->end == res->end && r->start > res->start)
-				continue;
-		}
-
-		if (!prev)
-			prev = r;
-
-		/*
-		 * A small resource is higher than a large one that ends at
-		 * the same address.
-		 */
-		if (r->end > prev->end ||
-		    (r->end == prev->end && r->start > prev->start))
-			prev = r;
-	}
-
-	return prev;
-}
-
 /**
  * pci_bus_alloc_resource - allocate a resource from a parent bus
  * @bus: PCI bus
@@ -132,10 +89,9 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 					  resource_size_t),
 		void *alignf_data)
 {
-	int ret = -ENOMEM;
+	int i, ret = -ENOMEM;
 	struct resource *r;
 	resource_size_t max = -1;
-	unsigned int type = res->flags & IORESOURCE_TYPE_BITS;
 
 	type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
 
@@ -143,9 +99,10 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 	if (!(res->flags & IORESOURCE_MEM_64))
 		max = PCIBIOS_MAX_MEM_32;
 
-	/* Look for space at highest addresses first */
-	r = pci_bus_find_resource_prev(bus, type, NULL);
-	for ( ; r; r = pci_bus_find_resource_prev(bus, type, r)) {
+	pci_bus_for_each_resource(bus, r, i) {
+		if (!r)
+			continue;
+
 		/* type_mask must match */
 		if ((res->flags ^ r->flags) & type_mask)
 			continue;
diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index 0157708d474..09933eb9126 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -1417,6 +1417,11 @@ int __init enable_drhd_fault_handling(void)
 			       (unsigned long long)drhd->reg_base_addr, ret);
 			return -1;
 		}
+
+		/*
+		 * Clear any previous faults.
+		 */
+		dmar_fault(iommu->irq, iommu);
 	}
 
 	return 0;
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index 5becbdee402..2850e64deda 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -276,6 +276,12 @@ int __init ibmphp_access_ebda (void)
 
 	for (;;) {
 		offset = next_offset;
+
+		/* Make sure what we read is still in the mapped section */
+		if (WARN(offset > (ebda_sz * 1024 - 4),
+			 "ibmphp_ebda: next read is beyond ebda_sz\n"))
+			break;
+
 		next_offset = readw (io_mem + offset);	/* offset of next blk */
 
 		offset += 2;
diff --git a/drivers/pci/hotplug/pciehp_acpi.c b/drivers/pci/hotplug/pciehp_acpi.c
index 2574700db46..5f7226223a6 100644
--- a/drivers/pci/hotplug/pciehp_acpi.c
+++ b/drivers/pci/hotplug/pciehp_acpi.c
@@ -115,7 +115,8 @@ static struct pcie_port_service_driver __initdata dummy_driver = {
 static int __init select_detection_mode(void)
 {
 	struct dummy_slot *slot, *tmp;
-	pcie_port_service_register(&dummy_driver);
+	if (pcie_port_service_register(&dummy_driver))
+		return PCIEHP_DETECT_ACPI;
 	pcie_port_service_unregister(&dummy_driver);
 	list_for_each_entry_safe(slot, tmp, &dummy_slots, list) {
 		list_del(&slot->list);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index b5a7d9bfcb2..63d5042f207 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -705,17 +705,21 @@ void pci_remove_legacy_files(struct pci_bus *b)
 
 #ifdef HAVE_PCI_MMAP
 
-int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma)
+int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma,
+		  enum pci_mmap_api mmap_api)
 {
-	unsigned long nr, start, size;
+	unsigned long nr, start, size, pci_start;
 
+	if (pci_resource_len(pdev, resno) == 0)
+		return 0;
 	nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 	start = vma->vm_pgoff;
 	size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1;
-	if (start < size && size - start >= nr)
+	pci_start = (mmap_api == PCI_MMAP_PROCFS) ?
+			pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0;
+	if (start >= pci_start && start < pci_start + size &&
+			start + nr <= pci_start + size)
 		return 1;
-	WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n",
-		current->comm, start, start+nr, pci_name(pdev), resno, size);
 	return 0;
 }
 
@@ -745,8 +749,15 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
 	if (i >= PCI_ROM_RESOURCE)
 		return -ENODEV;
 
-	if (!pci_mmap_fits(pdev, i, vma))
+	if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) {
+		WARN(1, "process \"%s\" tried to map 0x%08lx bytes "
+			"at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n",
+			current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff,
+			pci_name(pdev), i,
+			(u64)pci_resource_start(pdev, i),
+			(u64)pci_resource_len(pdev, i));
 		return -EINVAL;
+	}
 
 	/* pci_mmap_page_range() expects the same kind of entry as coming
 	 * from /proc/bus/pci/ which is a "user visible" value. If this is
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index e98c8104297..710c8a29be0 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1007,6 +1007,18 @@ static int __pci_enable_device_flags(struct pci_dev *dev,
 	int err;
 	int i, bars = 0;
 
+	/*
+	 * Power state could be unknown at this point, either due to a fresh
+	 * boot or a device removal call.  So get the current power state
+	 * so that things like MSI message writing will behave as expected
+	 * (e.g. if the device really is in D0 at enable time).
+	 */
+	if (dev->pm_cap) {
+		u16 pmcsr;
+		pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+		dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+	}
+
 	if (atomic_add_return(1, &dev->enable_cnt) > 1)
 		return 0;		/* already enabled */
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index f5c7c382765..7d33f667386 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -22,8 +22,13 @@ extern void pci_remove_firmware_label_files(struct pci_dev *pdev);
 #endif
 extern void pci_cleanup_rom(struct pci_dev *dev);
 #ifdef HAVE_PCI_MMAP
+enum pci_mmap_api {
+	PCI_MMAP_SYSFS,	/* mmap on /sys/bus/pci/devices/<BDF>/resource<N> */
+	PCI_MMAP_PROCFS	/* mmap on /proc/bus/pci/<BDF> */
+};
 extern int pci_mmap_fits(struct pci_dev *pdev, int resno,
-			 struct vm_area_struct *vma);
+			 struct vm_area_struct *vmai,
+			 enum pci_mmap_api mmap_api);
 #endif
 int pci_probe_reset_function(struct pci_dev *dev);
 
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index 297b72c880a..27911b55c2a 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -10,7 +10,6 @@
 #include <linux/module.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/capability.h>
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
@@ -257,7 +256,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma)
 
 	/* Make sure the caller is mapping a real resource for this device */
 	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		if (pci_mmap_fits(dev, i, vma))
+		if (pci_mmap_fits(dev, i, vma,  PCI_MMAP_PROCFS))
 			break;
 	}
 
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index f5c63fe9db5..53a786fd0d4 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2136,6 +2136,24 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB,
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
 			quirk_unhide_mch_dev6);
 
+#ifdef CONFIG_TILE
+/*
+ * The Tilera TILEmpower platform needs to set the link speed
+ * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed
+ * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe
+ * capability register of the PEX8624 PCIe switch. The switch
+ * supports link speed auto negotiation, but falsely sets
+ * the link speed to 5GT/s.
+ */
+static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev)
+{
+	if (tile_plx_gen1) {
+		pci_write_config_dword(dev, 0x98, 0x1);
+		mdelay(50);
+	}
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1);
+#endif /* CONFIG_TILE */
 
 #ifdef CONFIG_PCI_MSI
 /* Some chipsets do not support MSI. We cannot easily rely on setting
@@ -2311,6 +2329,9 @@ static void __devinit nvbridge_check_legacy_irq_routing(struct pci_dev *dev)
 {
 	u32 cfg;
 
+	if (!pci_find_capability(dev, PCI_CAP_ID_HT))
+		return;
+
 	pci_read_config_dword(dev, 0x74, &cfg);
 
 	if (cfg & ((1 << 2) | (1 << 15))) {
@@ -2746,6 +2767,29 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_m
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
 #endif /*CONFIG_MMC_RICOH_MMC*/
 
+#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
+#define VTUNCERRMSK_REG	0x1ac
+#define VTD_MSK_SPEC_ERRORS	(1 << 31)
+/*
+ * This is a quirk for masking vt-d spec defined errors to platform error
+ * handling logic. With out this, platforms using Intel 7500, 5500 chipsets
+ * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based
+ * on the RAS config settings of the platform) when a vt-d fault happens.
+ * The resulting SMI caused the system to hang.
+ *
+ * VT-d spec related errors are already handled by the VT-d OS code, so no
+ * need to report the same error through other channels.
+ */
+static void vtd_mask_spec_errors(struct pci_dev *dev)
+{
+	u32 word;
+
+	pci_read_config_dword(dev, VTUNCERRMSK_REG, &word);
+	pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
+#endif
 
 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
 			  struct pci_fixup *end)
diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
index a87c4985326..3a5a6fcc0ea 100644
--- a/drivers/pci/xen-pcifront.c
+++ b/drivers/pci/xen-pcifront.c
@@ -13,7 +13,6 @@
 #include <linux/spinlock.h>
 #include <linux/pci.h>
 #include <linux/msi.h>
-#include <xen/xenbus.h>
 #include <xen/interface/io/pciif.h>
 #include <asm/xen/pci.h>
 #include <linux/interrupt.h>
@@ -576,8 +575,9 @@ static pci_ers_result_t pcifront_common_process(int cmd,
 
 	pcidev = pci_get_bus_and_slot(bus, devfn);
 	if (!pcidev || !pcidev->driver) {
-		dev_err(&pcidev->dev,
-			"device or driver is NULL\n");
+		dev_err(&pdev->xdev->dev, "device or AER driver is NULL\n");
+		if (pcidev)
+			pci_dev_put(pcidev);
 		return result;
 	}
 	pdrv = pcidev->driver;
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index c80a7a6e769..de886f3dfd3 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -215,7 +215,8 @@ config PCMCIA_PXA2XX
 	depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \
 		    || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \
 		    || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \
-		    || MACH_VPAC270 || MACH_BALLOON3)
+		    || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \
+		    || MACH_COLIBRI320)
 	select PCMCIA_SOC_COMMON
 	help
 	  Say Y here to include support for the PXA2xx PCMCIA controller
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 8d9386a22eb..29935ea921d 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -50,8 +50,9 @@ sa1111_cs-$(CONFIG_SA1100_JORNADA720)		+= sa1100_jornada720.o
 sa1100_cs-y					+= sa1100_generic.o
 sa1100_cs-$(CONFIG_SA1100_ASSABET)		+= sa1100_assabet.o
 sa1100_cs-$(CONFIG_SA1100_CERF)			+= sa1100_cerf.o
-sa1100_cs-$(CONFIG_SA1100_COLLIE)              += pxa2xx_sharpsl.o
+sa1100_cs-$(CONFIG_SA1100_COLLIE)		+= pxa2xx_sharpsl.o
 sa1100_cs-$(CONFIG_SA1100_H3600)		+= sa1100_h3600.o
+sa1100_cs-$(CONFIG_SA1100_NANOENGINE)		+= sa1100_nanoengine.o
 sa1100_cs-$(CONFIG_SA1100_SHANNON)		+= sa1100_shannon.o
 sa1100_cs-$(CONFIG_SA1100_SIMPAD)		+= sa1100_simpad.o
 
@@ -70,6 +71,8 @@ pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
 pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
 pxa2xx-obj-$(CONFIG_MACH_VPAC270)		+= pxa2xx_vpac270.o
 pxa2xx-obj-$(CONFIG_MACH_BALLOON3)		+= pxa2xx_balloon3.o
+pxa2xx-obj-$(CONFIG_MACH_COLIBRI)		+= pxa2xx_colibri.o
+pxa2xx-obj-$(CONFIG_MACH_COLIBRI320)		+= pxa2xx_colibri.o
 
 obj-$(CONFIG_PCMCIA_PXA2XX)			+= pxa2xx_base.o $(pxa2xx-obj-y)
 
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 8cbfa067171..96c72e90b79 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -725,17 +725,17 @@ static int __devinit pd6729_pci_probe(struct pci_dev *dev,
 
 	return 0;
 
- err_out_free_res2:
+err_out_free_res2:
 	if (irq_mode == 1)
 		free_irq(dev->irq, socket);
 	else
 		del_timer_sync(&socket->poll_timer);
- err_out_free_res:
+err_out_free_res:
 	pci_release_regions(dev);
- err_out_disable:
+err_out_disable:
 	pci_disable_device(dev);
 
- err_out_free_mem:
+err_out_free_mem:
 	kfree(socket);
 	return ret;
 }
diff --git a/drivers/pcmcia/pd6729.h b/drivers/pcmcia/pd6729.h
index 41418d394c5..c8e84bdece3 100644
--- a/drivers/pcmcia/pd6729.h
+++ b/drivers/pcmcia/pd6729.h
@@ -15,7 +15,7 @@
 struct pd6729_socket {
 	int	number;
 	int	card_irq;
-	unsigned long io_base; 	/* base io address of the socket */
+	unsigned long io_base;	/* base io address of the socket */
 	struct pcmcia_socket socket;
 	struct timer_list poll_timer;
 };
diff --git a/drivers/pcmcia/pxa2xx_balloon3.c b/drivers/pcmcia/pxa2xx_balloon3.c
index dbbdd006320..453c54c9761 100644
--- a/drivers/pcmcia/pxa2xx_balloon3.c
+++ b/drivers/pcmcia/pxa2xx_balloon3.c
@@ -39,12 +39,10 @@ static struct pcmcia_irqs irqs[] = {
 static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
 {
 	uint16_t ver;
-	int ret;
-	static void __iomem *fpga_ver;
 
 	ver = __raw_readw(BALLOON3_FPGA_VER);
-	if (ver > 0x0201)
-		pr_warn("The FPGA code, version 0x%04x, is newer than rel-0.3. "
+	if (ver < 0x4f08)
+		pr_warn("The FPGA code, version 0x%04x, is too old. "
 			"PCMCIA/CF support might be broken in this version!",
 			ver);
 
@@ -97,8 +95,9 @@ static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 				       const socket_state_t *state)
 {
-	__raw_writew((state->flags & SS_RESET) ? BALLOON3_CF_RESET : 0,
-			BALLOON3_CF_CONTROL_REG);
+	__raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG |
+			((state->flags & SS_RESET) ?
+			BALLOON3_FPGA_SETnCLR : 0));
 	return 0;
 }
 
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index ae07b4db8a6..3755e7c8c71 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -26,6 +26,7 @@
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
+#include <mach/smemc.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
@@ -116,37 +117,49 @@ static inline u_int pxa2xx_pcmcia_cmd_time(u_int mem_clk_10khz,
 
 static int pxa2xx_pcmcia_set_mcmem( int sock, int speed, int clock )
 {
-	MCMEM(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+	uint32_t val;
+
+	val = ((pxa2xx_mcxx_setup(speed, clock)
 		& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
 		| ((pxa2xx_mcxx_asst(speed, clock)
 		& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
 		| ((pxa2xx_mcxx_hold(speed, clock)
 		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
+	__raw_writel(val, MCMEM(sock));
+
 	return 0;
 }
 
 static int pxa2xx_pcmcia_set_mcio( int sock, int speed, int clock )
 {
-	MCIO(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+	uint32_t val;
+
+	val = ((pxa2xx_mcxx_setup(speed, clock)
 		& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
 		| ((pxa2xx_mcxx_asst(speed, clock)
 		& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
 		| ((pxa2xx_mcxx_hold(speed, clock)
 		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
+	__raw_writel(val, MCIO(sock));
+
 	return 0;
 }
 
 static int pxa2xx_pcmcia_set_mcatt( int sock, int speed, int clock )
 {
-	MCATT(sock) = ((pxa2xx_mcxx_setup(speed, clock)
+	uint32_t val;
+
+	val = ((pxa2xx_mcxx_setup(speed, clock)
 		& MCXX_SETUP_MASK) << MCXX_SETUP_SHIFT)
 		| ((pxa2xx_mcxx_asst(speed, clock)
 		& MCXX_ASST_MASK) << MCXX_ASST_SHIFT)
 		| ((pxa2xx_mcxx_hold(speed, clock)
 		& MCXX_HOLD_MASK) << MCXX_HOLD_SHIFT);
 
+	__raw_writel(val, MCATT(sock));
+
 	return 0;
 }
 
@@ -166,8 +179,8 @@ static int pxa2xx_pcmcia_set_mcxx(struct soc_pcmcia_socket *skt, unsigned int cl
 
 static int pxa2xx_pcmcia_set_timing(struct soc_pcmcia_socket *skt)
 {
-	unsigned int clk = get_memclk_frequency_10khz();
-	return pxa2xx_pcmcia_set_mcxx(skt, clk);
+	unsigned long clk = clk_get_rate(skt->clk);
+	return pxa2xx_pcmcia_set_mcxx(skt, clk / 10000);
 }
 
 #ifdef CONFIG_CPU_FREQ
@@ -205,19 +218,18 @@ pxa2xx_pcmcia_frequency_change(struct soc_pcmcia_socket *skt,
 static void pxa2xx_configure_sockets(struct device *dev)
 {
 	struct pcmcia_low_level *ops = dev->platform_data;
-
 	/*
 	 * We have at least one socket, so set MECR:CIT
 	 * (Card Is There)
 	 */
-	MECR |= MECR_CIT;
+	uint32_t mecr = MECR_CIT;
 
 	/* Set MECR:NOS (Number Of Sockets) */
 	if ((ops->first + ops->nr) > 1 ||
 	    machine_is_viper() || machine_is_arcom_zeus())
-		MECR |= MECR_NOS;
-	else
-		MECR &= ~MECR_NOS;
+		mecr |= MECR_NOS;
+
+	__raw_writel(mecr, MECR);
 }
 
 static const char *skt_names[] = {
@@ -270,24 +282,41 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
 	struct pcmcia_low_level *ops;
 	struct skt_dev_info *sinfo;
 	struct soc_pcmcia_socket *skt;
+	struct clk *clk;
 
 	ops = (struct pcmcia_low_level *)dev->dev.platform_data;
-	if (!ops)
+	if (!ops) {
+		ret = -ENODEV;
+		goto err0;
+	}
+
+	if (cpu_is_pxa320() && ops->nr > 1) {
+		dev_err(&dev->dev, "pxa320 supports only one pcmcia slot");
+		ret = -EINVAL;
+		goto err0;
+	}
+
+	clk = clk_get(&dev->dev, NULL);
+	if (!clk)
 		return -ENODEV;
 
 	pxa2xx_drv_pcmcia_ops(ops);
 
 	sinfo = kzalloc(SKT_DEV_INFO_SIZE(ops->nr), GFP_KERNEL);
-	if (!sinfo)
+	if (!sinfo) {
+		clk_put(clk);
 		return -ENOMEM;
+	}
 
 	sinfo->nskt = ops->nr;
+	sinfo->clk = clk;
 
 	/* Initialize processor specific parameters */
 	for (i = 0; i < ops->nr; i++) {
 		skt = &sinfo->skt[i];
 
 		skt->nr = ops->first + i;
+		skt->clk = clk;
 		skt->ops = ops;
 		skt->socket.owner = ops->owner;
 		skt->socket.dev.parent = &dev->dev;
@@ -295,18 +324,26 @@ static int pxa2xx_drv_pcmcia_probe(struct platform_device *dev)
 
 		ret = pxa2xx_drv_pcmcia_add_one(skt);
 		if (ret)
-			break;
+			goto err1;
 	}
 
 	if (ret) {
 		while (--i >= 0)
 			soc_pcmcia_remove_one(&sinfo->skt[i]);
 		kfree(sinfo);
+		clk_put(clk);
 	} else {
 		pxa2xx_configure_sockets(&dev->dev);
 		dev_set_drvdata(&dev->dev, sinfo);
 	}
 
+	return 0;
+
+err1:
+	while (--i >= 0)
+		soc_pcmcia_remove_one(&sinfo->skt[i]);
+	kfree(sinfo);
+err0:
 	return ret;
 }
 
@@ -320,6 +357,7 @@ static int pxa2xx_drv_pcmcia_remove(struct platform_device *dev)
 	for (i = 0; i < sinfo->nskt; i++)
 		soc_pcmcia_remove_one(&sinfo->skt[i]);
 
+	clk_put(sinfo->clk);
 	kfree(sinfo);
 	return 0;
 }
diff --git a/drivers/pcmcia/pxa2xx_colibri.c b/drivers/pcmcia/pxa2xx_colibri.c
new file mode 100644
index 00000000000..c3f72192af6
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_colibri.c
@@ -0,0 +1,229 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_colibri.c
+ *
+ * Driver for Toradex Colibri PXA270 CF socket
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include "soc_common.h"
+
+#define	COLIBRI270_RESET_GPIO	53
+#define	COLIBRI270_PPEN_GPIO	107
+#define	COLIBRI270_BVD1_GPIO	83
+#define	COLIBRI270_BVD2_GPIO	82
+#define	COLIBRI270_DETECT_GPIO	84
+#define	COLIBRI270_READY_GPIO	1
+
+#define	COLIBRI320_RESET_GPIO	77
+#define	COLIBRI320_PPEN_GPIO	57
+#define	COLIBRI320_BVD1_GPIO	53
+#define	COLIBRI320_BVD2_GPIO	79
+#define	COLIBRI320_DETECT_GPIO	81
+#define	COLIBRI320_READY_GPIO	29
+
+static struct {
+	int	reset_gpio;
+	int	ppen_gpio;
+	int	bvd1_gpio;
+	int	bvd2_gpio;
+	int	detect_gpio;
+	int	ready_gpio;
+} colibri_pcmcia_gpio;
+
+static struct pcmcia_irqs colibri_irqs[] = {
+	{
+		.sock = 0,
+		.str  = "PCMCIA CD"
+	},
+};
+
+static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	ret = gpio_request(colibri_pcmcia_gpio.detect_gpio, "DETECT");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(colibri_pcmcia_gpio.detect_gpio);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(colibri_pcmcia_gpio.ready_gpio, "READY");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_input(colibri_pcmcia_gpio.ready_gpio);
+	if (ret)
+		goto err3;
+
+	ret = gpio_request(colibri_pcmcia_gpio.bvd1_gpio, "BVD1");
+	if (ret)
+		goto err3;
+	ret = gpio_direction_input(colibri_pcmcia_gpio.bvd1_gpio);
+	if (ret)
+		goto err4;
+
+	ret = gpio_request(colibri_pcmcia_gpio.bvd2_gpio, "BVD2");
+	if (ret)
+		goto err4;
+	ret = gpio_direction_input(colibri_pcmcia_gpio.bvd2_gpio);
+	if (ret)
+		goto err5;
+
+	ret = gpio_request(colibri_pcmcia_gpio.ppen_gpio, "PPEN");
+	if (ret)
+		goto err5;
+	ret = gpio_direction_output(colibri_pcmcia_gpio.ppen_gpio, 0);
+	if (ret)
+		goto err6;
+
+	ret = gpio_request(colibri_pcmcia_gpio.reset_gpio, "RESET");
+	if (ret)
+		goto err6;
+	ret = gpio_direction_output(colibri_pcmcia_gpio.reset_gpio, 1);
+	if (ret)
+		goto err7;
+
+	colibri_irqs[0].irq = gpio_to_irq(colibri_pcmcia_gpio.detect_gpio);
+	skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpio.ready_gpio);
+
+	return soc_pcmcia_request_irqs(skt, colibri_irqs,
+					ARRAY_SIZE(colibri_irqs));
+
+err7:
+	gpio_free(colibri_pcmcia_gpio.detect_gpio);
+err6:
+	gpio_free(colibri_pcmcia_gpio.ready_gpio);
+err5:
+	gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
+err4:
+	gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
+err3:
+	gpio_free(colibri_pcmcia_gpio.reset_gpio);
+err2:
+	gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+err1:
+	return ret;
+}
+
+static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	gpio_free(colibri_pcmcia_gpio.detect_gpio);
+	gpio_free(colibri_pcmcia_gpio.ready_gpio);
+	gpio_free(colibri_pcmcia_gpio.bvd1_gpio);
+	gpio_free(colibri_pcmcia_gpio.bvd2_gpio);
+	gpio_free(colibri_pcmcia_gpio.reset_gpio);
+	gpio_free(colibri_pcmcia_gpio.ppen_gpio);
+}
+
+static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+
+	state->detect = !!gpio_get_value(colibri_pcmcia_gpio.detect_gpio);
+	state->ready  = !!gpio_get_value(colibri_pcmcia_gpio.ready_gpio);
+	state->bvd1   = !!gpio_get_value(colibri_pcmcia_gpio.bvd1_gpio);
+	state->bvd2   = !!gpio_get_value(colibri_pcmcia_gpio.bvd2_gpio);
+	state->wrprot = 0;
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int
+colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+				const socket_state_t *state)
+{
+	gpio_set_value(colibri_pcmcia_gpio.ppen_gpio,
+			!(state->Vcc == 33 && state->Vpp < 50));
+	gpio_set_value(colibri_pcmcia_gpio.reset_gpio, state->flags & SS_RESET);
+	return 0;
+}
+
+static void colibri_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void colibri_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level colibri_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.first			= 0,
+	.nr			= 1,
+
+	.hw_init		= colibri_pcmcia_hw_init,
+	.hw_shutdown		= colibri_pcmcia_hw_shutdown,
+
+	.socket_state		= colibri_pcmcia_socket_state,
+	.configure_socket	= colibri_pcmcia_configure_socket,
+
+	.socket_init		= colibri_pcmcia_socket_init,
+	.socket_suspend		= colibri_pcmcia_socket_suspend,
+};
+
+static struct platform_device *colibri_pcmcia_device;
+
+static int __init colibri_pcmcia_init(void)
+{
+	int ret;
+
+	colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!colibri_pcmcia_device)
+		return -ENOMEM;
+
+	/* Colibri PXA270 */
+	if (machine_is_colibri()) {
+		colibri_pcmcia_gpio.reset_gpio	= COLIBRI270_RESET_GPIO;
+		colibri_pcmcia_gpio.ppen_gpio	= COLIBRI270_PPEN_GPIO;
+		colibri_pcmcia_gpio.bvd1_gpio	= COLIBRI270_BVD1_GPIO;
+		colibri_pcmcia_gpio.bvd2_gpio	= COLIBRI270_BVD2_GPIO;
+		colibri_pcmcia_gpio.detect_gpio	= COLIBRI270_DETECT_GPIO;
+		colibri_pcmcia_gpio.ready_gpio	= COLIBRI270_READY_GPIO;
+	/* Colibri PXA320 */
+	} else if (machine_is_colibri320()) {
+		colibri_pcmcia_gpio.reset_gpio	= COLIBRI320_RESET_GPIO;
+		colibri_pcmcia_gpio.ppen_gpio	= COLIBRI320_PPEN_GPIO;
+		colibri_pcmcia_gpio.bvd1_gpio	= COLIBRI320_BVD1_GPIO;
+		colibri_pcmcia_gpio.bvd2_gpio	= COLIBRI320_BVD2_GPIO;
+		colibri_pcmcia_gpio.detect_gpio	= COLIBRI320_DETECT_GPIO;
+		colibri_pcmcia_gpio.ready_gpio	= COLIBRI320_READY_GPIO;
+	}
+
+	ret = platform_device_add_data(colibri_pcmcia_device,
+		&colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(colibri_pcmcia_device);
+
+	if (ret)
+		platform_device_put(colibri_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit colibri_pcmcia_exit(void)
+{
+	platform_device_unregister(colibri_pcmcia_device);
+}
+
+module_init(colibri_pcmcia_init);
+module_exit(colibri_pcmcia_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/pxa2xx_sharpsl.c b/drivers/pcmcia/pxa2xx_sharpsl.c
index 0ea3b29440e..81af2b3bcc0 100644
--- a/drivers/pcmcia/pxa2xx_sharpsl.c
+++ b/drivers/pcmcia/pxa2xx_sharpsl.c
@@ -237,7 +237,7 @@ static struct pcmcia_low_level sharpsl_pcmcia_ops __initdata = {
 #ifdef CONFIG_SA1100_COLLIE
 #include "sa11xx_base.h"
 
-int __init pcmcia_collie_init(struct device *dev)
+int __devinit pcmcia_collie_init(struct device *dev)
 {
        int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index fd013a1ef47..f1e882272ab 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -130,7 +130,7 @@ static struct pcmcia_low_level assabet_pcmcia_ops = {
 	.socket_suspend		= assabet_pcmcia_socket_suspend,
 };
 
-int pcmcia_assabet_init(struct device *dev)
+int __devinit pcmcia_assabet_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_cerf.c b/drivers/pcmcia/sa1100_cerf.c
index 9bf088b1727..30560df8c76 100644
--- a/drivers/pcmcia/sa1100_cerf.c
+++ b/drivers/pcmcia/sa1100_cerf.c
@@ -97,7 +97,7 @@ static struct pcmcia_low_level cerf_pcmcia_ops = {
 	.socket_suspend		= cerf_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_cerf_init(struct device *dev)
+int __devinit pcmcia_cerf_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index 945857f8c28..fb9740d3e9a 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -53,6 +53,9 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
 #if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600)
 	pcmcia_h3600_init,
 #endif
+#ifdef CONFIG_SA1100_NANOENGINE
+	pcmcia_nanoengine_init,
+#endif
 #ifdef CONFIG_SA1100_SHANNON
 	pcmcia_shannon_init,
 #endif
@@ -64,7 +67,7 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
 #endif
 };
 
-static int sa11x0_drv_pcmcia_probe(struct platform_device *dev)
+static int __devinit sa11x0_drv_pcmcia_probe(struct platform_device *dev)
 {
 	int i, ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_generic.h b/drivers/pcmcia/sa1100_generic.h
index 794f96a35bb..adb08dbc723 100644
--- a/drivers/pcmcia/sa1100_generic.h
+++ b/drivers/pcmcia/sa1100_generic.h
@@ -13,6 +13,7 @@ extern int pcmcia_freebird_init(struct device *);
 extern int pcmcia_gcplus_init(struct device *);
 extern int pcmcia_graphicsmaster_init(struct device *);
 extern int pcmcia_h3600_init(struct device *);
+extern int pcmcia_nanoengine_init(struct device *);
 extern int pcmcia_pangolin_init(struct device *);
 extern int pcmcia_pfs168_init(struct device *);
 extern int pcmcia_shannon_init(struct device *);
diff --git a/drivers/pcmcia/sa1100_h3600.c b/drivers/pcmcia/sa1100_h3600.c
index 56329ad575a..edf8f002889 100644
--- a/drivers/pcmcia/sa1100_h3600.c
+++ b/drivers/pcmcia/sa1100_h3600.c
@@ -219,7 +219,7 @@ struct pcmcia_low_level h3600_pcmcia_ops = {
 	.socket_suspend		= h3600_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_h3600_init(struct device *dev)
+int __devinit pcmcia_h3600_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_nanoengine.c b/drivers/pcmcia/sa1100_nanoengine.c
new file mode 100644
index 00000000000..3d2652e2f5a
--- /dev/null
+++ b/drivers/pcmcia/sa1100_nanoengine.c
@@ -0,0 +1,219 @@
+/*
+ * drivers/pcmcia/sa1100_nanoengine.c
+ *
+ * PCMCIA implementation routines for BSI nanoEngine.
+ *
+ * In order to have a fully functional pcmcia subsystem in a BSE nanoEngine
+ * board you should carefully read this:
+ * http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/
+ *
+ * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
+ *
+ * Based on original work for kernel 2.4 by
+ * Miguel Freitas <miguel@cpti.cetuc.puc-rio.br>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/nanoengine.h>
+
+#include "sa1100_generic.h"
+
+static struct pcmcia_irqs irqs_skt0[] = {
+	/* socket, IRQ, name */
+	{ 0, NANOENGINE_IRQ_GPIO_PC_CD0, "PC CD0" },
+};
+
+static struct pcmcia_irqs irqs_skt1[] = {
+	/* socket, IRQ, name */
+	{ 1, NANOENGINE_IRQ_GPIO_PC_CD1, "PC CD1" },
+};
+
+struct nanoengine_pins {
+	unsigned input_pins;
+	unsigned output_pins;
+	unsigned clear_outputs;
+	unsigned transition_pins;
+	unsigned pci_irq;
+	struct pcmcia_irqs *pcmcia_irqs;
+	unsigned pcmcia_irqs_size;
+};
+
+static struct nanoengine_pins nano_skts[] = {
+	{
+		.input_pins		= GPIO_PC_READY0 | GPIO_PC_CD0,
+		.output_pins		= GPIO_PC_RESET0,
+		.clear_outputs		= GPIO_PC_RESET0,
+		.transition_pins	= NANOENGINE_IRQ_GPIO_PC_CD0,
+		.pci_irq		= NANOENGINE_IRQ_GPIO_PC_READY0,
+		.pcmcia_irqs		= irqs_skt0,
+		.pcmcia_irqs_size	= ARRAY_SIZE(irqs_skt0)
+	}, {
+		.input_pins		= GPIO_PC_READY1 | GPIO_PC_CD1,
+		.output_pins		= GPIO_PC_RESET1,
+		.clear_outputs		= GPIO_PC_RESET1,
+		.transition_pins	= NANOENGINE_IRQ_GPIO_PC_CD1,
+		.pci_irq		= NANOENGINE_IRQ_GPIO_PC_READY1,
+		.pcmcia_irqs		= irqs_skt1,
+		.pcmcia_irqs_size	= ARRAY_SIZE(irqs_skt1)
+	}
+};
+
+unsigned num_nano_pcmcia_sockets = ARRAY_SIZE(nano_skts);
+
+static int nanoengine_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	unsigned i = skt->nr;
+
+	if (i >= num_nano_pcmcia_sockets)
+		return -ENXIO;
+
+	GPDR &= ~nano_skts[i].input_pins;
+	GPDR |= nano_skts[i].output_pins;
+	GPCR = nano_skts[i].clear_outputs;
+	set_irq_type(nano_skts[i].transition_pins, IRQ_TYPE_EDGE_BOTH);
+	skt->socket.pci_irq = nano_skts[i].pci_irq;
+
+	return soc_pcmcia_request_irqs(skt,
+		nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+/*
+ * Release all resources.
+ */
+static void nanoengine_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	unsigned i = skt->nr;
+
+	if (i >= num_nano_pcmcia_sockets)
+		return;
+
+	soc_pcmcia_free_irqs(skt,
+		nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+static int nanoengine_pcmcia_configure_socket(
+	struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+	unsigned reset;
+	unsigned i = skt->nr;
+
+	if (i >= num_nano_pcmcia_sockets)
+		return -ENXIO;
+
+	switch (i) {
+	case 0:
+		reset = GPIO_PC_RESET0;
+		break;
+	case 1:
+		reset = GPIO_PC_RESET1;
+		break;
+	default:
+		return -ENXIO;
+	}
+
+	if (state->flags & SS_RESET)
+		GPSR = reset;
+	else
+		GPCR = reset;
+
+	return 0;
+}
+
+static void nanoengine_pcmcia_socket_state(
+	struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
+{
+	unsigned long levels = GPLR;
+	unsigned i = skt->nr;
+
+	if (i >= num_nano_pcmcia_sockets)
+		return;
+
+	memset(state, 0, sizeof(struct pcmcia_state));
+	switch (i) {
+	case 0:
+		state->ready = (levels & GPIO_PC_READY0) ? 1 : 0;
+		state->detect = !(levels & GPIO_PC_CD0) ? 1 : 0;
+		break;
+	case 1:
+		state->ready = (levels & GPIO_PC_READY1) ? 1 : 0;
+		state->detect = !(levels & GPIO_PC_CD1) ? 1 : 0;
+		break;
+	default:
+		return;
+	}
+	state->bvd1 = 1;
+	state->bvd2 = 1;
+	state->wrprot = 0; /* Not available */
+	state->vs_3v = 1; /* Can only apply 3.3V */
+	state->vs_Xv = 0;
+}
+
+/*
+ * Enable card status IRQs on (re-)initialisation.  This can
+ * be called at initialisation, power management event, or
+ * pcmcia event.
+ */
+static void nanoengine_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+	unsigned i = skt->nr;
+
+	if (i >= num_nano_pcmcia_sockets)
+		return;
+
+	soc_pcmcia_enable_irqs(skt,
+		nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+/*
+ * Disable card status IRQs on suspend.
+ */
+static void nanoengine_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+	unsigned i = skt->nr;
+
+	if (i >= num_nano_pcmcia_sockets)
+		return;
+
+	soc_pcmcia_disable_irqs(skt,
+		nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
+}
+
+static struct pcmcia_low_level nanoengine_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.hw_init		= nanoengine_pcmcia_hw_init,
+	.hw_shutdown		= nanoengine_pcmcia_hw_shutdown,
+
+	.configure_socket	= nanoengine_pcmcia_configure_socket,
+	.socket_state		= nanoengine_pcmcia_socket_state,
+	.socket_init		= nanoengine_pcmcia_socket_init,
+	.socket_suspend		= nanoengine_pcmcia_socket_suspend,
+};
+
+int pcmcia_nanoengine_init(struct device *dev)
+{
+	int ret = -ENODEV;
+
+	if (machine_is_nanoengine())
+		ret = sa11xx_drv_pcmcia_probe(
+			dev, &nanoengine_pcmcia_ops, 0, 2);
+
+	return ret;
+}
+
diff --git a/drivers/pcmcia/sa1100_shannon.c b/drivers/pcmcia/sa1100_shannon.c
index c4d51867a05..7ff1b43540b 100644
--- a/drivers/pcmcia/sa1100_shannon.c
+++ b/drivers/pcmcia/sa1100_shannon.c
@@ -113,7 +113,7 @@ static struct pcmcia_low_level shannon_pcmcia_ops = {
 	.socket_suspend		= shannon_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_shannon_init(struct device *dev)
+int __devinit pcmcia_shannon_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_simpad.c b/drivers/pcmcia/sa1100_simpad.c
index 05bd504e6f1..c998f7aaadb 100644
--- a/drivers/pcmcia/sa1100_simpad.c
+++ b/drivers/pcmcia/sa1100_simpad.c
@@ -123,7 +123,7 @@ static struct pcmcia_low_level simpad_pcmcia_ops = {
 	.socket_suspend		= simpad_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_simpad_init(struct device *dev)
+int __devinit pcmcia_simpad_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c
index 689e3c02edb..5a9a392eacd 100644
--- a/drivers/pcmcia/soc_common.c
+++ b/drivers/pcmcia/soc_common.c
@@ -31,20 +31,20 @@
 ======================================================================*/
 
 
-#include <linux/module.h>
-#include <linux/moduleparam.h>
+#include <linux/cpufreq.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
 #include <linux/kernel.h>
-#include <linux/timer.h>
 #include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
 #include <linux/mutex.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/spinlock.h>
-#include <linux/cpufreq.h>
+#include <linux/timer.h>
 
 #include <mach/hardware.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include "soc_common.h"
@@ -57,18 +57,25 @@ module_param(pc_debug, int, 0644);
 void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
 		      int lvl, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 	if (pc_debug > lvl) {
-		printk(KERN_DEBUG "skt%u: %s: ", skt->nr, func);
 		va_start(args, fmt);
-		vprintk(fmt, args);
+
+		vaf.fmt = fmt;
+		vaf.va = &args;
+
+		printk(KERN_DEBUG "skt%u: %s: %pV", skt->nr, func, &vaf);
+
 		va_end(args);
 	}
 }
+EXPORT_SYMBOL(soc_pcmcia_debug);
 
 #endif
 
-#define to_soc_pcmcia_socket(x)	container_of(x, struct soc_pcmcia_socket, socket)
+#define to_soc_pcmcia_socket(x)	\
+	container_of(x, struct soc_pcmcia_socket, socket)
 
 static unsigned short
 calc_speed(unsigned short *spds, int num, unsigned short dflt)
@@ -85,11 +92,15 @@ calc_speed(unsigned short *spds, int num, unsigned short dflt)
 	return speed;
 }
 
-void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *skt, struct soc_pcmcia_timing *timing)
+void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *skt,
+	struct soc_pcmcia_timing *timing)
 {
-	timing->io = calc_speed(skt->spd_io, MAX_IO_WIN, SOC_PCMCIA_IO_ACCESS);
-	timing->mem = calc_speed(skt->spd_mem, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS);
-	timing->attr = calc_speed(skt->spd_attr, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS);
+	timing->io =
+		calc_speed(skt->spd_io, MAX_IO_WIN, SOC_PCMCIA_IO_ACCESS);
+	timing->mem =
+		calc_speed(skt->spd_mem, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS);
+	timing->attr =
+		calc_speed(skt->spd_attr, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS);
 }
 EXPORT_SYMBOL(soc_common_pcmcia_get_timing);
 
@@ -131,8 +142,8 @@ static unsigned int soc_common_pcmcia_skt_state(struct soc_pcmcia_socket *skt)
  *
  * Convert PCMCIA socket state to our socket configure structure.
  */
-static int
-soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *state)
+static int soc_common_pcmcia_config_skt(
+	struct soc_pcmcia_socket *skt, socket_state_t *state)
 {
 	int ret;
 
@@ -144,7 +155,8 @@ soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *stat
 		 */
 		if (skt->irq_state != 1 && state->io_irq) {
 			skt->irq_state = 1;
-			set_irq_type(skt->socket.pci_irq, IRQ_TYPE_EDGE_FALLING);
+			set_irq_type(skt->socket.pci_irq,
+				IRQ_TYPE_EDGE_FALLING);
 		} else if (skt->irq_state == 1 && state->io_irq == 0) {
 			skt->irq_state = 0;
 			set_irq_type(skt->socket.pci_irq, IRQ_TYPE_NONE);
@@ -298,24 +310,24 @@ soc_common_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status)
  * of power configuration, reset, &c. We also record the value of
  * `state' in order to regurgitate it to the PCMCIA core later.
  */
-static int
-soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
+static int soc_common_pcmcia_set_socket(
+	struct pcmcia_socket *sock, socket_state_t *state)
 {
 	struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
 
-	debug(skt, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
-			(state->csc_mask==0)?"<NONE> ":"",
-			(state->csc_mask&SS_DETECT)?"DETECT ":"",
-			(state->csc_mask&SS_READY)?"READY ":"",
-			(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
-			(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
-			(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
-			(state->flags==0)?"<NONE> ":"",
-			(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
-			(state->flags&SS_IOCARD)?"IOCARD ":"",
-			(state->flags&SS_RESET)?"RESET ":"",
-			(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
-			(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
+	debug(skt, 2, "mask: %s%s%s%s%s%s flags: %s%s%s%s%s%s Vcc %d Vpp %d irq %d\n",
+			(state->csc_mask == 0)		? "<NONE> " :	"",
+			(state->csc_mask & SS_DETECT)	? "DETECT " :	"",
+			(state->csc_mask & SS_READY)	? "READY " :	"",
+			(state->csc_mask & SS_BATDEAD)	? "BATDEAD " :	"",
+			(state->csc_mask & SS_BATWARN)	? "BATWARN " :	"",
+			(state->csc_mask & SS_STSCHG)	? "STSCHG " :	"",
+			(state->flags == 0)		? "<NONE> " :	"",
+			(state->flags & SS_PWR_AUTO)	? "PWR_AUTO " :	"",
+			(state->flags & SS_IOCARD)	? "IOCARD " :	"",
+			(state->flags & SS_RESET)	? "RESET " :	"",
+			(state->flags & SS_SPKR_ENA)	? "SPKR_ENA " :	"",
+			(state->flags & SS_OUTPUT_ENA)	? "OUTPUT_ENA " : "",
 			state->Vcc, state->Vpp, state->io_irq);
 
 	return soc_common_pcmcia_config_skt(skt, state);
@@ -330,8 +342,8 @@ soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
  *
  * Returns: 0 on success, -1 on error
  */
-static int
-soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map)
+static int soc_common_pcmcia_set_io_map(
+	struct pcmcia_socket *sock, struct pccard_io_map *map)
 {
 	struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
 	unsigned short speed = map->speed;
@@ -340,14 +352,14 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
 		map->map, map->speed, (unsigned long long)map->start,
 		(unsigned long long)map->stop);
 	debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n",
-		(map->flags==0)?"<NONE>":"",
-		(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
-		(map->flags&MAP_16BIT)?"16BIT ":"",
-		(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
-		(map->flags&MAP_0WS)?"0WS ":"",
-		(map->flags&MAP_WRPROT)?"WRPROT ":"",
-		(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"",
-		(map->flags&MAP_PREFETCH)?"PREFETCH ":"");
+		(map->flags == 0)		? "<NONE>"	: "",
+		(map->flags & MAP_ACTIVE)	? "ACTIVE "	: "",
+		(map->flags & MAP_16BIT)	? "16BIT "	: "",
+		(map->flags & MAP_AUTOSZ)	? "AUTOSZ "	: "",
+		(map->flags & MAP_0WS)		? "0WS "	: "",
+		(map->flags & MAP_WRPROT)	? "WRPROT "	: "",
+		(map->flags & MAP_USE_WAIT)	? "USE_WAIT "	: "",
+		(map->flags & MAP_PREFETCH)	? "PREFETCH "	: "");
 
 	if (map->map >= MAX_IO_WIN) {
 		printk(KERN_ERR "%s(): map (%d) out of range\n", __func__,
@@ -384,8 +396,8 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
  *
  * Returns: 0 on success, -ERRNO on error
  */
-static int
-soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
+static int soc_common_pcmcia_set_mem_map(
+	struct pcmcia_socket *sock, struct pccard_mem_map *map)
 {
 	struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
 	struct resource *res;
@@ -394,14 +406,14 @@ soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map
 	debug(skt, 2, "map %u speed %u card_start %08x\n",
 		map->map, map->speed, map->card_start);
 	debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n",
-		(map->flags==0)?"<NONE>":"",
-		(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
-		(map->flags&MAP_16BIT)?"16BIT ":"",
-		(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
-		(map->flags&MAP_0WS)?"0WS ":"",
-		(map->flags&MAP_WRPROT)?"WRPROT ":"",
-		(map->flags&MAP_ATTRIB)?"ATTRIB ":"",
-		(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
+		(map->flags == 0)		? "<NONE>"	: "",
+		(map->flags & MAP_ACTIVE)	? "ACTIVE "	: "",
+		(map->flags & MAP_16BIT)	? "16BIT "	: "",
+		(map->flags & MAP_AUTOSZ)	? "AUTOSZ "	: "",
+		(map->flags & MAP_0WS)		? "0WS "	: "",
+		(map->flags & MAP_WRPROT)	? "WRPROT "	: "",
+		(map->flags & MAP_ATTRIB)	? "ATTRIB "	: "",
+		(map->flags & MAP_USE_WAIT)	? "USE_WAIT "	: "");
 
 	if (map->map >= MAX_WIN)
 		return -EINVAL;
@@ -456,8 +468,8 @@ static struct bittbl conf_bits[] = {
 	{ SS_OUTPUT_ENA,	"SS_OUTPUT_ENA"	},
 };
 
-static void
-dump_bits(char **p, const char *prefix, unsigned int val, struct bittbl *bits, int sz)
+static void dump_bits(char **p, const char *prefix,
+	unsigned int val, struct bittbl *bits, int sz)
 {
 	char *b = *p;
 	int i;
@@ -475,13 +487,14 @@ dump_bits(char **p, const char *prefix, unsigned int val, struct bittbl *bits, i
  *
  * Returns: the number of characters added to the buffer
  */
-static ssize_t show_status(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t show_status(
+	struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct soc_pcmcia_socket *skt =
 		container_of(dev, struct soc_pcmcia_socket, socket.dev);
 	char *p = buf;
 
-	p+=sprintf(p, "slot     : %d\n", skt->nr);
+	p += sprintf(p, "slot     : %d\n", skt->nr);
 
 	dump_bits(&p, "status", skt->status,
 		  status_bits, ARRAY_SIZE(status_bits));
@@ -490,12 +503,12 @@ static ssize_t show_status(struct device *dev, struct device_attribute *attr, ch
 	dump_bits(&p, "cs_flags", skt->cs_state.flags,
 		  conf_bits, ARRAY_SIZE(conf_bits));
 
-	p+=sprintf(p, "Vcc      : %d\n", skt->cs_state.Vcc);
-	p+=sprintf(p, "Vpp      : %d\n", skt->cs_state.Vpp);
-	p+=sprintf(p, "IRQ      : %d (%d)\n", skt->cs_state.io_irq,
+	p += sprintf(p, "Vcc      : %d\n", skt->cs_state.Vcc);
+	p += sprintf(p, "Vpp      : %d\n", skt->cs_state.Vpp);
+	p += sprintf(p, "IRQ      : %d (%d)\n", skt->cs_state.io_irq,
 		skt->socket.pci_irq);
 	if (skt->ops->show_timing)
-		p+=skt->ops->show_timing(skt, p);
+		p += skt->ops->show_timing(skt, p);
 
 	return p-buf;
 }
@@ -588,7 +601,7 @@ soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
 
 	mutex_lock(&soc_pcmcia_sockets_lock);
 	list_for_each_entry(skt, &soc_pcmcia_sockets, node)
-		if ( skt->ops->frequency_change )
+		if (skt->ops->frequency_change)
 			ret += skt->ops->frequency_change(skt, val, freqs);
 	mutex_unlock(&soc_pcmcia_sockets_lock);
 
@@ -614,7 +627,8 @@ fs_initcall(soc_pcmcia_cpufreq_register);
 
 static void soc_pcmcia_cpufreq_unregister(void)
 {
-	cpufreq_unregister_notifier(&soc_pcmcia_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
+	cpufreq_unregister_notifier(&soc_pcmcia_notifier_block,
+		CPUFREQ_TRANSITION_NOTIFIER);
 }
 module_exit(soc_pcmcia_cpufreq_unregister);
 
diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h
index bbcd5385a22..9daa73615c8 100644
--- a/drivers/pcmcia/soc_common.h
+++ b/drivers/pcmcia/soc_common.h
@@ -10,6 +10,7 @@
 #define _ASM_ARCH_PCMCIA
 
 /* include the world */
+#include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <pcmcia/ss.h>
 #include <pcmcia/cistpl.h>
@@ -29,6 +30,7 @@ struct soc_pcmcia_socket {
 	 * Info from low level handler
 	 */
 	unsigned int		nr;
+	struct clk		*clk;
 
 	/*
 	 * Core PCMCIA state
@@ -56,6 +58,7 @@ struct soc_pcmcia_socket {
 
 struct skt_dev_info {
 	int nskt;
+	struct clk *clk;
 	struct soc_pcmcia_socket skt[0];
 };
 
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 60a5a5c6b50..d235f44fd7a 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -81,6 +81,8 @@ MODULE_PARM_DESC(wapf, "WAPF value");
 
 static int wlan_status = 1;
 static int bluetooth_status = 1;
+static int wimax_status = -1;
+static int wwan_status = -1;
 
 module_param(wlan_status, int, 0444);
 MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
@@ -92,6 +94,16 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
 		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
 		 "default is 1");
 
+module_param(wimax_status, int, 0444);
+MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot "
+		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+		 "default is 1");
+
+module_param(wwan_status, int, 0444);
+MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot "
+		 "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+		 "default is 1");
+
 /*
  * Some events we use, same for all Asus
  */
@@ -114,6 +126,8 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
  */
 #define WL_RSTS		0x01	/* internal Wifi */
 #define BT_RSTS		0x02	/* internal Bluetooth */
+#define WM_RSTS		0x08    /* internal wimax */
+#define WW_RSTS		0x20    /* internal wwan */
 
 /* LED */
 #define METHOD_MLED		"MLED"
@@ -132,6 +146,11 @@ MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot "
  */
 #define METHOD_WLAN		"WLED"
 #define METHOD_BLUETOOTH	"BLED"
+
+/* WWAN and WIMAX */
+#define METHOD_WWAN		"GSMC"
+#define METHOD_WIMAX		"WMXC"
+
 #define METHOD_WL_STATUS	"RSTS"
 
 /* Brightness */
@@ -883,6 +902,64 @@ static ssize_t store_bluetooth(struct device *dev,
 }
 
 /*
+ * Wimax
+ */
+static int asus_wimax_set(struct asus_laptop *asus, int status)
+{
+	if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) {
+		pr_warning("Error setting wimax status to %d", status);
+		return -EIO;
+	}
+	return 0;
+}
+
+static ssize_t show_wimax(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS));
+}
+
+static ssize_t store_wimax(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX);
+}
+
+/*
+ * Wwan
+ */
+static int asus_wwan_set(struct asus_laptop *asus, int status)
+{
+	if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) {
+		pr_warning("Error setting wwan status to %d", status);
+		return -EIO;
+	}
+	return 0;
+}
+
+static ssize_t show_wwan(struct device *dev,
+			      struct device_attribute *attr, char *buf)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS));
+}
+
+static ssize_t store_wwan(struct device *dev,
+			       struct device_attribute *attr, const char *buf,
+			       size_t count)
+{
+	struct asus_laptop *asus = dev_get_drvdata(dev);
+
+	return sysfs_acpi_set(asus, buf, count, METHOD_WWAN);
+}
+
+/*
  * Display
  */
 static void asus_set_display(struct asus_laptop *asus, int value)
@@ -1202,6 +1279,8 @@ static DEVICE_ATTR(infos, S_IRUGO, show_infos, NULL);
 static DEVICE_ATTR(wlan, S_IRUGO | S_IWUSR, show_wlan, store_wlan);
 static DEVICE_ATTR(bluetooth, S_IRUGO | S_IWUSR,
 		   show_bluetooth, store_bluetooth);
+static DEVICE_ATTR(wimax, S_IRUGO | S_IWUSR, show_wimax, store_wimax);
+static DEVICE_ATTR(wwan, S_IRUGO | S_IWUSR, show_wwan, store_wwan);
 static DEVICE_ATTR(display, S_IRUGO | S_IWUSR, show_disp, store_disp);
 static DEVICE_ATTR(ledd, S_IRUGO | S_IWUSR, show_ledd, store_ledd);
 static DEVICE_ATTR(ls_level, S_IRUGO | S_IWUSR, show_lslvl, store_lslvl);
@@ -1212,6 +1291,8 @@ static struct attribute *asus_attributes[] = {
 	&dev_attr_infos.attr,
 	&dev_attr_wlan.attr,
 	&dev_attr_bluetooth.attr,
+	&dev_attr_wimax.attr,
+	&dev_attr_wwan.attr,
 	&dev_attr_display.attr,
 	&dev_attr_ledd.attr,
 	&dev_attr_ls_level.attr,
@@ -1239,6 +1320,13 @@ static mode_t asus_sysfs_is_visible(struct kobject *kobj,
 	} else if (attr == &dev_attr_display.attr) {
 		supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL);
 
+	} else if (attr == &dev_attr_wimax.attr) {
+		supported =
+			!acpi_check_handle(asus->handle, METHOD_WIMAX, NULL);
+
+	} else if (attr == &dev_attr_wwan.attr) {
+		supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL);
+
 	} else if (attr == &dev_attr_ledd.attr) {
 		supported = !acpi_check_handle(handle, METHOD_LEDD, NULL);
 
@@ -1397,7 +1485,8 @@ static int asus_laptop_get_info(struct asus_laptop *asus)
 
 	/*
 	 * The HWRS method return informations about the hardware.
-	 * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+	 * 0x80 bit is for WLAN, 0x100 for Bluetooth,
+	 * 0x40 for WWAN, 0x10 for WIMAX.
 	 * The significance of others is yet to be found.
 	 */
 	status =
@@ -1440,6 +1529,12 @@ static int __devinit asus_acpi_init(struct asus_laptop *asus)
 	if (wlan_status >= 0)
 		asus_wlan_set(asus, !!wlan_status);
 
+	if (wimax_status >= 0)
+		asus_wimax_set(asus, !!wimax_status);
+
+	if (wwan_status >= 0)
+		asus_wwan_set(asus, !!wwan_status);
+
 	/* Keyboard Backlight is on by default */
 	if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL))
 		asus_kled_set(asus, 1);
diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c
index 462ceab93f8..0d50fbbe247 100644
--- a/drivers/platform/x86/eeepc-wmi.c
+++ b/drivers/platform/x86/eeepc-wmi.c
@@ -298,8 +298,8 @@ static void eeepc_wmi_notify(u32 value, void *context)
 	kfree(obj);
 }
 
-static int store_cpufv(struct device *dev, struct device_attribute *attr,
-		       const char *buf, size_t count)
+static ssize_t store_cpufv(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
 {
 	int value;
 	struct acpi_buffer input = { (acpi_size)sizeof(value), &value };
diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index 1dac659b5e0..9e05af9c41c 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -172,6 +172,8 @@ static int hp_wmi_perform_query(int query, int write, u32 *buffer,
 	bios_return = *((struct bios_return *)obj->buffer.pointer);
 
 	memcpy(buffer, &bios_return.value, sizeof(bios_return.value));
+
+	kfree(obj);
 	return 0;
 }
 
diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c
index 3c2c6b91ecb..94a114aa8e2 100644
--- a/drivers/platform/x86/ibm_rtl.c
+++ b/drivers/platform/x86/ibm_rtl.c
@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 #include <linux/dmi.h>
+#include <linux/efi.h>
 #include <linux/mutex.h>
 #include <asm/bios_ebda.h>
 
@@ -220,32 +221,13 @@ static void rtl_teardown_sysfs(void) {
 	sysdev_class_unregister(&class_rtl);
 }
 
-static int dmi_check_cb(const struct dmi_system_id *id)
-{
-	RTL_DEBUG("found IBM server '%s'\n", id->ident);
-	return 0;
-}
-
-#define ibm_dmi_entry(NAME, TYPE)                  \
-{                                                  \
-	.ident = NAME,                             \
-	.matches = {                               \
-		DMI_MATCH(DMI_SYS_VENDOR, "IBM"),  \
-		DMI_MATCH(DMI_PRODUCT_NAME, TYPE), \
-	},                                         \
-	.callback = dmi_check_cb                   \
-}
 
 static struct dmi_system_id __initdata ibm_rtl_dmi_table[] = {
-	ibm_dmi_entry("BladeCenter LS21", "7971"),
-	ibm_dmi_entry("BladeCenter LS22", "7901"),
-	ibm_dmi_entry("BladeCenter HS21 XM", "7995"),
-	ibm_dmi_entry("BladeCenter HS22", "7870"),
-	ibm_dmi_entry("BladeCenter HS22V", "7871"),
-	ibm_dmi_entry("System x3550 M2", "7946"),
-	ibm_dmi_entry("System x3650 M2", "7947"),
-	ibm_dmi_entry("System x3550 M3", "7944"),
-	ibm_dmi_entry("System x3650 M3", "7945"),
+	{                                                  \
+		.matches = {                               \
+			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),  \
+		},                                         \
+	},
 	{ }
 };
 
@@ -257,7 +239,7 @@ static int __init ibm_rtl_init(void) {
 	if (force)
 		pr_warning("ibm-rtl: module loaded by force\n");
 	/* first ensure that we are running on IBM HW */
-	else if (!dmi_check_system(ibm_rtl_dmi_table))
+	else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table))
 		return -ENODEV;
 
 	/* Get the address for the Extended BIOS Data Area */
@@ -302,7 +284,7 @@ static int __init ibm_rtl_init(void) {
 			RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n",
 			      rtl_cmd_width, rtl_cmd_type);
 			addr = ioread32(&rtl_table->cmd_port_address);
-			RTL_DEBUG("addr = %#llx\n", addr);
+			RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr);
 			plen = rtl_cmd_width/sizeof(char);
 			rtl_cmd_addr = rtl_port_map(addr, plen);
 			RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr);
diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c
index c44a5e8b8b8..f0b3ad13c27 100644
--- a/drivers/platform/x86/intel_ips.c
+++ b/drivers/platform/x86/intel_ips.c
@@ -75,6 +75,7 @@
 #include <drm/i915_drm.h>
 #include <asm/msr.h>
 #include <asm/processor.h>
+#include "intel_ips.h"
 
 #define PCI_DEVICE_ID_INTEL_THERMAL_SENSOR 0x3b32
 
@@ -245,6 +246,7 @@
 #define thm_writel(off, val) writel((val), ips->regmap + (off))
 
 static const int IPS_ADJUST_PERIOD = 5000; /* ms */
+static bool late_i915_load = false;
 
 /* For initial average collection */
 static const int IPS_SAMPLE_PERIOD = 200; /* ms */
@@ -339,6 +341,9 @@ struct ips_driver {
 	u64 orig_turbo_ratios;
 };
 
+static bool
+ips_gpu_turbo_enabled(struct ips_driver *ips);
+
 /**
  * ips_cpu_busy - is CPU busy?
  * @ips: IPS driver struct
@@ -517,7 +522,7 @@ static void ips_disable_cpu_turbo(struct ips_driver *ips)
  */
 static bool ips_gpu_busy(struct ips_driver *ips)
 {
-	if (!ips->gpu_turbo_enabled)
+	if (!ips_gpu_turbo_enabled(ips))
 		return false;
 
 	return ips->gpu_busy();
@@ -532,7 +537,7 @@ static bool ips_gpu_busy(struct ips_driver *ips)
  */
 static void ips_gpu_raise(struct ips_driver *ips)
 {
-	if (!ips->gpu_turbo_enabled)
+	if (!ips_gpu_turbo_enabled(ips))
 		return;
 
 	if (!ips->gpu_raise())
@@ -549,7 +554,7 @@ static void ips_gpu_raise(struct ips_driver *ips)
  */
 static void ips_gpu_lower(struct ips_driver *ips)
 {
-	if (!ips->gpu_turbo_enabled)
+	if (!ips_gpu_turbo_enabled(ips))
 		return;
 
 	if (!ips->gpu_lower())
@@ -1454,6 +1459,31 @@ out_err:
 	return false;
 }
 
+static bool
+ips_gpu_turbo_enabled(struct ips_driver *ips)
+{
+	if (!ips->gpu_busy && late_i915_load) {
+		if (ips_get_i915_syms(ips)) {
+			dev_info(&ips->dev->dev,
+				 "i915 driver attached, reenabling gpu turbo\n");
+			ips->gpu_turbo_enabled = !(thm_readl(THM_HTS) & HTS_GTD_DIS);
+		}
+	}
+
+	return ips->gpu_turbo_enabled;
+}
+
+void
+ips_link_to_i915_driver()
+{
+	/* We can't cleanly get at the various ips_driver structs from
+	 * this caller (the i915 driver), so just set a flag saying
+	 * that it's time to try getting the symbols again.
+	 */
+	late_i915_load = true;
+}
+EXPORT_SYMBOL_GPL(ips_link_to_i915_driver);
+
 static DEFINE_PCI_DEVICE_TABLE(ips_id_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
 		     PCI_DEVICE_ID_INTEL_THERMAL_SENSOR), },
diff --git a/drivers/platform/x86/intel_ips.h b/drivers/platform/x86/intel_ips.h
new file mode 100644
index 00000000000..73299beff5b
--- /dev/null
+++ b/drivers/platform/x86/intel_ips.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+void ips_link_to_i915_driver(void);
diff --git a/drivers/platform/x86/intel_scu_ipc.c b/drivers/platform/x86/intel_scu_ipc.c
index 41a9e34899a..ca35b0ce944 100644
--- a/drivers/platform/x86/intel_scu_ipc.c
+++ b/drivers/platform/x86/intel_scu_ipc.c
@@ -26,6 +26,7 @@
 #include <linux/sfi.h>
 #include <asm/mrst.h>
 #include <asm/intel_scu_ipc.h>
+#include <asm/mrst.h>
 
 /* IPC defines the following message types */
 #define IPCMSG_WATCHDOG_TIMER 0xF8 /* Set Kernel Watchdog Threshold */
@@ -699,6 +700,9 @@ static int ipc_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		iounmap(ipcdev.ipc_base);
 		return -ENOMEM;
 	}
+
+	intel_scu_devices_create();
+
 	return 0;
 }
 
@@ -720,6 +724,7 @@ static void ipc_remove(struct pci_dev *pdev)
 	iounmap(ipcdev.ipc_base);
 	iounmap(ipcdev.i2c_base);
 	ipcdev.pdev = NULL;
+	intel_scu_devices_destroy();
 }
 
 static const struct pci_device_id pci_ids[] = {
diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c
index 42a5469a245..35278ad7e62 100644
--- a/drivers/platform/x86/msi-wmi.c
+++ b/drivers/platform/x86/msi-wmi.c
@@ -43,16 +43,18 @@ MODULE_ALIAS("wmi:B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2");
 
 #define dprintk(msg...) pr_debug(DRV_PFX msg)
 
-#define KEYCODE_BASE 0xD0
-#define MSI_WMI_BRIGHTNESSUP   KEYCODE_BASE
-#define MSI_WMI_BRIGHTNESSDOWN (KEYCODE_BASE + 1)
-#define MSI_WMI_VOLUMEUP       (KEYCODE_BASE + 2)
-#define MSI_WMI_VOLUMEDOWN     (KEYCODE_BASE + 3)
+#define SCANCODE_BASE 0xD0
+#define MSI_WMI_BRIGHTNESSUP   SCANCODE_BASE
+#define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1)
+#define MSI_WMI_VOLUMEUP       (SCANCODE_BASE + 2)
+#define MSI_WMI_VOLUMEDOWN     (SCANCODE_BASE + 3)
+#define MSI_WMI_MUTE           (SCANCODE_BASE + 4)
 static struct key_entry msi_wmi_keymap[] = {
 	{ KE_KEY, MSI_WMI_BRIGHTNESSUP,   {KEY_BRIGHTNESSUP} },
 	{ KE_KEY, MSI_WMI_BRIGHTNESSDOWN, {KEY_BRIGHTNESSDOWN} },
 	{ KE_KEY, MSI_WMI_VOLUMEUP,       {KEY_VOLUMEUP} },
 	{ KE_KEY, MSI_WMI_VOLUMEDOWN,     {KEY_VOLUMEDOWN} },
+	{ KE_KEY, MSI_WMI_MUTE,           {KEY_MUTE} },
 	{ KE_END, 0}
 };
 static ktime_t last_pressed[ARRAY_SIZE(msi_wmi_keymap) - 1];
@@ -169,7 +171,7 @@ static void msi_wmi_notify(u32 value, void *context)
 			ktime_t diff;
 			cur = ktime_get_real();
 			diff = ktime_sub(cur, last_pressed[key->code -
-					KEYCODE_BASE]);
+					SCANCODE_BASE]);
 			/* Ignore event if the same event happened in a 50 ms
 			   timeframe -> Key press may result in 10-20 GPEs */
 			if (ktime_to_us(diff) < 1000 * 50) {
@@ -178,7 +180,7 @@ static void msi_wmi_notify(u32 value, void *context)
 					 key->code, ktime_to_us(diff));
 				return;
 			}
-			last_pressed[key->code - KEYCODE_BASE] = cur;
+			last_pressed[key->code - SCANCODE_BASE] = cur;
 
 			if (key->type == KE_KEY &&
 			/* Brightness is served via acpi video driver */
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 2d61186ad5a..e8c21994b36 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -8497,7 +8497,6 @@ static void ibm_exit(struct ibm_struct *ibm)
 					   ibm->acpi->type,
 					   dispatch_acpi_notify);
 		ibm->flags.acpi_notify_installed = 0;
-		ibm->flags.acpi_notify_installed = 0;
 	}
 
 	if (ibm->flags.proc_created) {
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 06f304f46e0..4276da7291b 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -135,6 +135,7 @@ static const struct key_entry toshiba_acpi_keymap[] __initconst = {
 	{ KE_KEY, 0x141, { KEY_BRIGHTNESSUP } },
 	{ KE_KEY, 0x142, { KEY_WLAN } },
 	{ KE_KEY, 0x143, { KEY_PROG1 } },
+	{ KE_KEY, 0x17f, { KEY_FN } },
 	{ KE_KEY, 0xb05, { KEY_PROG2 } },
 	{ KE_KEY, 0xb06, { KEY_WWW } },
 	{ KE_KEY, 0xb07, { KEY_MAIL } },
diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c
index 104b77c87ef..aecd9a9b549 100644
--- a/drivers/platform/x86/wmi.c
+++ b/drivers/platform/x86/wmi.c
@@ -755,7 +755,7 @@ static bool guid_already_parsed(const char *guid_string)
 	struct wmi_block *wblock;
 
 	list_for_each_entry(wblock, &wmi_block_list, list)
-		if (strncmp(wblock->gblock.guid, guid_string, 16) == 0)
+		if (memcmp(wblock->gblock.guid, guid_string, 16) == 0)
 			return true;
 
 	return false;
diff --git a/drivers/pnp/isapnp/proc.c b/drivers/pnp/isapnp/proc.c
index e73ebefdf3e..315b3112aca 100644
--- a/drivers/pnp/isapnp/proc.c
+++ b/drivers/pnp/isapnp/proc.c
@@ -21,7 +21,6 @@
 #include <linux/isapnp.h>
 #include <linux/proc_fs.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 
 extern struct pnp_protocol isapnp_protocol;
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 2d73dfcecdb..57313f4658b 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -180,7 +180,7 @@ struct pnp_protocol pnpacpi_protocol = {
 };
 EXPORT_SYMBOL(pnpacpi_protocol);
 
-static char *pnpacpi_get_id(struct acpi_device *device)
+static char *__init pnpacpi_get_id(struct acpi_device *device)
 {
 	struct acpi_hardware_id *id;
 
diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c
index b3c01c16a16..e7f89785bee 100644
--- a/drivers/power/ds2760_battery.c
+++ b/drivers/power/ds2760_battery.c
@@ -580,10 +580,8 @@ static int ds2760_battery_remove(struct platform_device *pdev)
 {
 	struct ds2760_device_info *di = platform_get_drvdata(pdev);
 
-	cancel_rearming_delayed_workqueue(di->monitor_wqueue,
-					  &di->monitor_work);
-	cancel_rearming_delayed_workqueue(di->monitor_wqueue,
-					  &di->set_charged_work);
+	cancel_delayed_work_sync(&di->monitor_work);
+	cancel_delayed_work_sync(&di->set_charged_work);
 	destroy_workqueue(di->monitor_wqueue);
 	power_supply_unregister(&di->bat);
 	kfree(di);
diff --git a/drivers/power/intel_mid_battery.c b/drivers/power/intel_mid_battery.c
index 2a10cd36118..36cf402c067 100644
--- a/drivers/power/intel_mid_battery.c
+++ b/drivers/power/intel_mid_battery.c
@@ -730,8 +730,7 @@ static __devinit int probe(int irq, struct device *dev)
 power_reg_failed_1:
 	power_supply_unregister(&pbi->batt);
 power_reg_failed:
-	cancel_rearming_delayed_workqueue(pbi->monitor_wqueue,
-						&pbi->monitor_battery);
+	cancel_delayed_work_sync(&pbi->monitor_battery);
 requestirq_failed:
 	destroy_workqueue(pbi->monitor_wqueue);
 wqueue_failed:
@@ -760,8 +759,7 @@ static int __devexit platform_pmic_battery_remove(struct platform_device *pdev)
 	struct pmic_power_module_info *pbi = dev_get_drvdata(&pdev->dev);
 
 	free_irq(pbi->irq, pbi);
-	cancel_rearming_delayed_workqueue(pbi->monitor_wqueue,
-					&pbi->monitor_battery);
+	cancel_delayed_work_sync(&pbi->monitor_battery);
 	destroy_workqueue(pbi->monitor_wqueue);
 
 	power_supply_unregister(&pbi->usb);
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 68cf0c99138..7b5080c4556 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -1159,11 +1159,11 @@ int __devinit rio_init_mports(void)
 
 	list_for_each_entry(port, &rio_mports, node) {
 		if (!request_mem_region(port->iores.start,
-					port->iores.end - port->iores.start,
+					resource_size(&port->iores),
 					port->name)) {
 			printk(KERN_ERR
 			       "RIO: Error requesting master port region 0x%016llx-0x%016llx\n",
-			       (u64)port->iores.start, (u64)port->iores.end - 1);
+			       (u64)port->iores.start, (u64)port->iores.end);
 			rc = -ENOMEM;
 			goto out;
 		}
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index f1d10c974cd..ba521f0f0fa 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -911,7 +911,7 @@ out:
 }
 
 /**
- * set_consumer_device_supply: Bind a regulator to a symbolic supply
+ * set_consumer_device_supply - Bind a regulator to a symbolic supply
  * @rdev:         regulator source
  * @consumer_dev: device the supply applies to
  * @consumer_dev_name: dev_name() string for device supply applies to
@@ -1052,7 +1052,6 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 			printk(KERN_WARNING
 			       "%s: could not add device link %s err %d\n",
 			       __func__, dev->kobj.name, err);
-			device_remove_file(dev, &regulator->dev_attr);
 			goto link_name_err;
 		}
 	}
@@ -1268,13 +1267,17 @@ static int _regulator_enable(struct regulator_dev *rdev)
 {
 	int ret, delay;
 
-	/* do we need to enable the supply regulator first */
-	if (rdev->supply) {
-		ret = _regulator_enable(rdev->supply);
-		if (ret < 0) {
-			printk(KERN_ERR "%s: failed to enable %s: %d\n",
-			       __func__, rdev_get_name(rdev), ret);
-			return ret;
+	if (rdev->use_count == 0) {
+		/* do we need to enable the supply regulator first */
+		if (rdev->supply) {
+			mutex_lock(&rdev->supply->mutex);
+			ret = _regulator_enable(rdev->supply);
+			mutex_unlock(&rdev->supply->mutex);
+			if (ret < 0) {
+				printk(KERN_ERR "%s: failed to enable %s: %d\n",
+				       __func__, rdev_get_name(rdev), ret);
+				return ret;
+			}
 		}
 	}
 
@@ -1313,10 +1316,12 @@ static int _regulator_enable(struct regulator_dev *rdev)
 			if (ret < 0)
 				return ret;
 
-			if (delay >= 1000)
+			if (delay >= 1000) {
 				mdelay(delay / 1000);
-			else if (delay)
+				udelay(delay % 1000);
+			} else if (delay) {
 				udelay(delay);
+			}
 
 		} else if (ret < 0) {
 			printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n",
@@ -1359,6 +1364,7 @@ static int _regulator_disable(struct regulator_dev *rdev,
 		struct regulator_dev **supply_rdev_ptr)
 {
 	int ret = 0;
+	*supply_rdev_ptr = NULL;
 
 	if (WARN(rdev->use_count <= 0,
 			"unbalanced disables for %s\n",
@@ -2346,6 +2352,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	if (init_data->supply_regulator && init_data->supply_regulator_dev) {
 		dev_err(dev,
 			"Supply regulator specified by both name and dev\n");
+		ret = -EINVAL;
 		goto scrub;
 	}
 
@@ -2364,6 +2371,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 		if (!found) {
 			dev_err(dev, "Failed to find supply %s\n",
 				init_data->supply_regulator);
+			ret = -ENODEV;
 			goto scrub;
 		}
 
diff --git a/drivers/regulator/mc13783-regulator.c b/drivers/regulator/mc13783-regulator.c
index 4597d508a22..ecd99f59dba 100644
--- a/drivers/regulator/mc13783-regulator.c
+++ b/drivers/regulator/mc13783-regulator.c
@@ -465,8 +465,8 @@ static struct regulator_ops mc13783_fixed_regulator_ops = {
 	.get_voltage = mc13783_fixed_regulator_get_voltage,
 };
 
-int mc13783_powermisc_rmw(struct mc13783_regulator_priv *priv, u32 mask,
-									u32 val)
+static int mc13783_powermisc_rmw(struct mc13783_regulator_priv *priv, u32 mask,
+				 u32 val)
 {
 	struct mc13783 *mc13783 = priv->mc13783;
 	int ret;
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index 51237fbb1bb..6d20b0454a1 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -231,8 +231,7 @@ static int tps6586x_dvm_voltages[] = {
 };
 
 #define TPS6586X_REGULATOR(_id, vdata, _ops, vreg, shift, nbits,	\
-			   ereg0, ebit0, ereg1, ebit1, goreg, gobit)	\
-{									\
+			   ereg0, ebit0, ereg1, ebit1)			\
 	.desc	= {							\
 		.name	= "REG-" #_id,					\
 		.ops	= &tps6586x_regulator_##_ops,			\
@@ -248,18 +247,26 @@ static int tps6586x_dvm_voltages[] = {
 	.enable_bit[0]	= (ebit0),					\
 	.enable_reg[1]	= TPS6586X_SUPPLY##ereg1,			\
 	.enable_bit[1]	= (ebit1),					\
-	.voltages	= tps6586x_##vdata##_voltages,			\
-}
+	.voltages	= tps6586x_##vdata##_voltages,
+
+#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit)			\
+	.go_reg = TPS6586X_##goreg,					\
+	.go_bit = (gobit),
 
 #define TPS6586X_LDO(_id, vdata, vreg, shift, nbits,			\
 		     ereg0, ebit0, ereg1, ebit1)			\
+{									\
 	TPS6586X_REGULATOR(_id, vdata, ldo_ops, vreg, shift, nbits,	\
-			   ereg0, ebit0, ereg1, ebit1, 0, 0)
+			   ereg0, ebit0, ereg1, ebit1)			\
+}
 
 #define TPS6586X_DVM(_id, vdata, vreg, shift, nbits,			\
 		     ereg0, ebit0, ereg1, ebit1, goreg, gobit)		\
+{									\
 	TPS6586X_REGULATOR(_id, vdata, dvm_ops, vreg, shift, nbits,	\
-			   ereg0, ebit0, ereg1, ebit1, goreg, gobit)
+			   ereg0, ebit0, ereg1, ebit1)			\
+	TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit)			\
+}
 
 static struct tps6586x_regulator tps6586x_regulator[] = {
 	TPS6586X_LDO(LDO_0, ldo, SUPPLYV1, 5, 3, ENC, 0, END, 0),
@@ -267,11 +274,11 @@ static struct tps6586x_regulator tps6586x_regulator[] = {
 	TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
 	TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
 	TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
-	TPS6586X_LDO(LDO_8, ldo, SUPPLYV1, 5, 3, ENC, 6, END, 6),
+	TPS6586X_LDO(LDO_8, ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
 	TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
-	TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, ENE, 7, ENE, 7),
+	TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
 	TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
-	TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 1, END, 1),
+	TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
 
 	TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6),
 	TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6),
@@ -290,6 +297,10 @@ static inline int tps6586x_regulator_preinit(struct device *parent,
 	uint8_t val1, val2;
 	int ret;
 
+	if (ri->enable_reg[0] == ri->enable_reg[1] &&
+	    ri->enable_bit[0] == ri->enable_bit[1])
+			return 0;
+
 	ret = tps6586x_read(parent, ri->enable_reg[0], &val1);
 	if (ret)
 		return ret;
@@ -298,14 +309,14 @@ static inline int tps6586x_regulator_preinit(struct device *parent,
 	if (ret)
 		return ret;
 
-	if (!(val2 & ri->enable_bit[1]))
+	if (!(val2 & (1 << ri->enable_bit[1])))
 		return 0;
 
 	/*
 	 * The regulator is on, but it's enabled with the bit we don't
 	 * want to use, so we switch the enable bits
 	 */
-	if (!(val1 & ri->enable_bit[0])) {
+	if (!(val1 & (1 << ri->enable_bit[0]))) {
 		ret = tps6586x_set_bits(parent, ri->enable_reg[0],
 					1 << ri->enable_bit[0]);
 		if (ret)
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 7e5892efc43..a57262a4fa6 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -219,12 +219,12 @@ static int twlreg_set_mode(struct regulator_dev *rdev, unsigned mode)
 		return -EACCES;
 
 	status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
-			message >> 8, 0x15 /* PB_WORD_MSB */ );
-	if (status >= 0)
+			message >> 8, TWL4030_PM_MASTER_PB_WORD_MSB);
+	if (status < 0)
 		return status;
 
 	return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
-			message, 0x16 /* PB_WORD_LSB */ );
+			message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB);
 }
 
 /*----------------------------------------------------------------------*/
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 2883428d5ac..4941cade319 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -463,6 +463,18 @@ config RTC_DRV_CMOS
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-cmos.
 
+config RTC_DRV_VRTC
+	tristate "Virtual RTC for Moorestown platforms"
+	depends on X86_MRST
+	default y if X86_MRST
+
+	help
+	Say "yes" here to get direct support for the real time clock
+	found on Moorestown platforms. The VRTC is a emulated RTC that
+	derives its clock source from a real RTC in the PMIC. The MC146818
+	style programming interface is mostly conserved, but any
+	updates are done via IPC calls to the system controller FW.
+
 config RTC_DRV_DS1216
 	tristate "Dallas DS1216"
 	depends on SNI_RM
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 4c2832df469..2afdaf3ff98 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc-cmos.o
 obj-$(CONFIG_RTC_DRV_COH901331)	+= rtc-coh901331.o
 obj-$(CONFIG_RTC_DRV_DAVINCI)	+= rtc-davinci.o
 obj-$(CONFIG_RTC_DRV_DM355EVM)	+= rtc-dm355evm.o
+obj-$(CONFIG_RTC_DRV_VRTC)	+= rtc-mrst.o
 obj-$(CONFIG_RTC_DRV_DS1216)	+= rtc-ds1216.o
 obj-$(CONFIG_RTC_DRV_DS1286)	+= rtc-ds1286.o
 obj-$(CONFIG_RTC_DRV_DS1302)	+= rtc-ds1302.o
diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 62227cd5241..0cc0984d155 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -104,7 +104,7 @@ static int clear_uie(struct rtc_device *rtc)
 		}
 		if (rtc->uie_task_active) {
 			spin_unlock_irq(&rtc->irq_lock);
-			flush_scheduled_work();
+			flush_work_sync(&rtc->uie_task);
 			spin_lock_irq(&rtc->irq_lock);
 		}
 		rtc->uie_irq_active = 0;
diff --git a/drivers/rtc/rtc-ds1305.c b/drivers/rtc/rtc-ds1305.c
index 48da85e97ca..077af1d7b9e 100644
--- a/drivers/rtc/rtc-ds1305.c
+++ b/drivers/rtc/rtc-ds1305.c
@@ -813,7 +813,7 @@ static int __devexit ds1305_remove(struct spi_device *spi)
 	if (spi->irq) {
 		set_bit(FLAG_EXITING, &ds1305->flags);
 		free_irq(spi->irq, ds1305);
-		flush_scheduled_work();
+		cancel_work_sync(&ds1305->work);
 	}
 
 	rtc_device_unregister(ds1305->rtc);
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 1f0007fd443..47fb6357c34 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -417,7 +417,7 @@ static int __devexit ds1374_remove(struct i2c_client *client)
 		mutex_unlock(&ds1374->mutex);
 
 		free_irq(client->irq, client);
-		flush_scheduled_work();
+		cancel_work_sync(&ds1374->work);
 	}
 
 	rtc_device_unregister(ds1374->rtc);
diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c
index 57063552d3b..23a9ee19764 100644
--- a/drivers/rtc/rtc-ds3232.c
+++ b/drivers/rtc/rtc-ds3232.c
@@ -463,7 +463,7 @@ static int __devexit ds3232_remove(struct i2c_client *client)
 		mutex_unlock(&ds3232->mutex);
 
 		free_irq(client->irq, client);
-		flush_scheduled_work();
+		cancel_work_sync(&ds3232->work);
 	}
 
 	rtc_device_unregister(ds3232->rtc);
diff --git a/drivers/rtc/rtc-mrst.c b/drivers/rtc/rtc-mrst.c
new file mode 100644
index 00000000000..bcd0cf63eb1
--- /dev/null
+++ b/drivers/rtc/rtc-mrst.c
@@ -0,0 +1,582 @@
+/*
+ * rtc-mrst.c: Driver for Moorestown virtual RTC
+ *
+ * (C) Copyright 2009 Intel Corporation
+ * Author: Jacob Pan (jacob.jun.pan@intel.com)
+ *	   Feng Tang (feng.tang@intel.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ * VRTC is emulated by system controller firmware, the real HW
+ * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
+ * in a memory mapped IO space that is visible to the host IA
+ * processor.
+ *
+ * This driver is based upon drivers/rtc/rtc-cmos.c
+ */
+
+/*
+ * Note:
+ *  * vRTC only supports binary mode and 24H mode
+ *  * vRTC only support PIE and AIE, no UIE, and its PIE only happens
+ *    at 23:59:59pm everyday, no support for adjustable frequency
+ *  * Alarm function is also limited to hr/min/sec.
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+
+#include <asm-generic/rtc.h>
+#include <asm/intel_scu_ipc.h>
+#include <asm/mrst.h>
+#include <asm/mrst-vrtc.h>
+
+struct mrst_rtc {
+	struct rtc_device	*rtc;
+	struct device		*dev;
+	int			irq;
+	struct resource		*iomem;
+
+	u8			enabled_wake;
+	u8			suspend_ctrl;
+};
+
+static const char driver_name[] = "rtc_mrst";
+
+#define	RTC_IRQMASK	(RTC_PF | RTC_AF)
+
+static inline int is_intr(u8 rtc_intr)
+{
+	if (!(rtc_intr & RTC_IRQF))
+		return 0;
+	return rtc_intr & RTC_IRQMASK;
+}
+
+/*
+ * rtc_time's year contains the increment over 1900, but vRTC's YEAR
+ * register can't be programmed to value larger than 0x64, so vRTC
+ * driver chose to use 1960 (1970 is UNIX time start point) as the base,
+ * and does the translation at read/write time.
+ *
+ * Why not just use 1970 as the offset? it's because using 1960 will
+ * make it consistent in leap year setting for both vrtc and low-level
+ * physical rtc devices.
+ */
+static int mrst_read_time(struct device *dev, struct rtc_time *time)
+{
+	unsigned long flags;
+
+	if (rtc_is_updating())
+		mdelay(20);
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	time->tm_sec = vrtc_cmos_read(RTC_SECONDS);
+	time->tm_min = vrtc_cmos_read(RTC_MINUTES);
+	time->tm_hour = vrtc_cmos_read(RTC_HOURS);
+	time->tm_mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
+	time->tm_mon = vrtc_cmos_read(RTC_MONTH);
+	time->tm_year = vrtc_cmos_read(RTC_YEAR);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	/* Adjust for the 1960/1900 */
+	time->tm_year += 60;
+	time->tm_mon--;
+	return RTC_24H;
+}
+
+static int mrst_set_time(struct device *dev, struct rtc_time *time)
+{
+	int ret;
+	unsigned long flags;
+	unsigned char mon, day, hrs, min, sec;
+	unsigned int yrs;
+
+	yrs = time->tm_year;
+	mon = time->tm_mon + 1;   /* tm_mon starts at zero */
+	day = time->tm_mday;
+	hrs = time->tm_hour;
+	min = time->tm_min;
+	sec = time->tm_sec;
+
+	if (yrs < 70 || yrs > 138)
+		return -EINVAL;
+	yrs -= 60;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+
+	vrtc_cmos_write(yrs, RTC_YEAR);
+	vrtc_cmos_write(mon, RTC_MONTH);
+	vrtc_cmos_write(day, RTC_DAY_OF_MONTH);
+	vrtc_cmos_write(hrs, RTC_HOURS);
+	vrtc_cmos_write(min, RTC_MINUTES);
+	vrtc_cmos_write(sec, RTC_SECONDS);
+
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
+	ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETTIME);
+	return ret;
+}
+
+static int mrst_read_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned char rtc_control;
+
+	if (mrst->irq <= 0)
+		return -EIO;
+
+	/* Basic alarms only support hour, minute, and seconds fields.
+	 * Some also support day and month, for alarms up to a year in
+	 * the future.
+	 */
+	t->time.tm_mday = -1;
+	t->time.tm_mon = -1;
+	t->time.tm_year = -1;
+
+	/* vRTC only supports binary mode */
+	spin_lock_irq(&rtc_lock);
+	t->time.tm_sec = vrtc_cmos_read(RTC_SECONDS_ALARM);
+	t->time.tm_min = vrtc_cmos_read(RTC_MINUTES_ALARM);
+	t->time.tm_hour = vrtc_cmos_read(RTC_HOURS_ALARM);
+
+	rtc_control = vrtc_cmos_read(RTC_CONTROL);
+	spin_unlock_irq(&rtc_lock);
+
+	t->enabled = !!(rtc_control & RTC_AIE);
+	t->pending = 0;
+
+	return 0;
+}
+
+static void mrst_checkintr(struct mrst_rtc *mrst, unsigned char rtc_control)
+{
+	unsigned char	rtc_intr;
+
+	/*
+	 * NOTE after changing RTC_xIE bits we always read INTR_FLAGS;
+	 * allegedly some older rtcs need that to handle irqs properly
+	 */
+	rtc_intr = vrtc_cmos_read(RTC_INTR_FLAGS);
+	rtc_intr &= (rtc_control & RTC_IRQMASK) | RTC_IRQF;
+	if (is_intr(rtc_intr))
+		rtc_update_irq(mrst->rtc, 1, rtc_intr);
+}
+
+static void mrst_irq_enable(struct mrst_rtc *mrst, unsigned char mask)
+{
+	unsigned char	rtc_control;
+
+	/*
+	 * Flush any pending IRQ status, notably for update irqs,
+	 * before we enable new IRQs
+	 */
+	rtc_control = vrtc_cmos_read(RTC_CONTROL);
+	mrst_checkintr(mrst, rtc_control);
+
+	rtc_control |= mask;
+	vrtc_cmos_write(rtc_control, RTC_CONTROL);
+
+	mrst_checkintr(mrst, rtc_control);
+}
+
+static void mrst_irq_disable(struct mrst_rtc *mrst, unsigned char mask)
+{
+	unsigned char	rtc_control;
+
+	rtc_control = vrtc_cmos_read(RTC_CONTROL);
+	rtc_control &= ~mask;
+	vrtc_cmos_write(rtc_control, RTC_CONTROL);
+	mrst_checkintr(mrst, rtc_control);
+}
+
+static int mrst_set_alarm(struct device *dev, struct rtc_wkalrm *t)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned char hrs, min, sec;
+	int ret = 0;
+
+	if (!mrst->irq)
+		return -EIO;
+
+	hrs = t->time.tm_hour;
+	min = t->time.tm_min;
+	sec = t->time.tm_sec;
+
+	spin_lock_irq(&rtc_lock);
+	/* Next rtc irq must not be from previous alarm setting */
+	mrst_irq_disable(mrst, RTC_AIE);
+
+	/* Update alarm */
+	vrtc_cmos_write(hrs, RTC_HOURS_ALARM);
+	vrtc_cmos_write(min, RTC_MINUTES_ALARM);
+	vrtc_cmos_write(sec, RTC_SECONDS_ALARM);
+
+	spin_unlock_irq(&rtc_lock);
+
+	ret = intel_scu_ipc_simple_command(IPCMSG_VRTC, IPC_CMD_VRTC_SETALARM);
+	if (ret)
+		return ret;
+
+	spin_lock_irq(&rtc_lock);
+	if (t->enabled)
+		mrst_irq_enable(mrst, RTC_AIE);
+
+	spin_unlock_irq(&rtc_lock);
+
+	return 0;
+}
+
+static int mrst_irq_set_state(struct device *dev, int enabled)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned long	flags;
+
+	if (!mrst->irq)
+		return -ENXIO;
+
+	spin_lock_irqsave(&rtc_lock, flags);
+
+	if (enabled)
+		mrst_irq_enable(mrst, RTC_PIE);
+	else
+		mrst_irq_disable(mrst, RTC_PIE);
+
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return 0;
+}
+
+#if defined(CONFIG_RTC_INTF_DEV) || defined(CONFIG_RTC_INTF_DEV_MODULE)
+
+/* Currently, the vRTC doesn't support UIE ON/OFF */
+static int
+mrst_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned long	flags;
+
+	switch (cmd) {
+	case RTC_AIE_OFF:
+	case RTC_AIE_ON:
+		if (!mrst->irq)
+			return -EINVAL;
+		break;
+	default:
+		/* PIE ON/OFF is handled by mrst_irq_set_state() */
+		return -ENOIOCTLCMD;
+	}
+
+	spin_lock_irqsave(&rtc_lock, flags);
+	switch (cmd) {
+	case RTC_AIE_OFF:	/* alarm off */
+		mrst_irq_disable(mrst, RTC_AIE);
+		break;
+	case RTC_AIE_ON:	/* alarm on */
+		mrst_irq_enable(mrst, RTC_AIE);
+		break;
+	}
+	spin_unlock_irqrestore(&rtc_lock, flags);
+	return 0;
+}
+
+#else
+#define	mrst_rtc_ioctl	NULL
+#endif
+
+#if defined(CONFIG_RTC_INTF_PROC) || defined(CONFIG_RTC_INTF_PROC_MODULE)
+
+static int mrst_procfs(struct device *dev, struct seq_file *seq)
+{
+	unsigned char	rtc_control, valid;
+
+	spin_lock_irq(&rtc_lock);
+	rtc_control = vrtc_cmos_read(RTC_CONTROL);
+	valid = vrtc_cmos_read(RTC_VALID);
+	spin_unlock_irq(&rtc_lock);
+
+	return seq_printf(seq,
+			"periodic_IRQ\t: %s\n"
+			"alarm\t\t: %s\n"
+			"BCD\t\t: no\n"
+			"periodic_freq\t: daily (not adjustable)\n",
+			(rtc_control & RTC_PIE) ? "on" : "off",
+			(rtc_control & RTC_AIE) ? "on" : "off");
+}
+
+#else
+#define	mrst_procfs	NULL
+#endif
+
+static const struct rtc_class_ops mrst_rtc_ops = {
+	.ioctl		= mrst_rtc_ioctl,
+	.read_time	= mrst_read_time,
+	.set_time	= mrst_set_time,
+	.read_alarm	= mrst_read_alarm,
+	.set_alarm	= mrst_set_alarm,
+	.proc		= mrst_procfs,
+	.irq_set_state	= mrst_irq_set_state,
+};
+
+static struct mrst_rtc	mrst_rtc;
+
+/*
+ * When vRTC IRQ is captured by SCU FW, FW will clear the AIE bit in
+ * Reg B, so no need for this driver to clear it
+ */
+static irqreturn_t mrst_rtc_irq(int irq, void *p)
+{
+	u8 irqstat;
+
+	spin_lock(&rtc_lock);
+	/* This read will clear all IRQ flags inside Reg C */
+	irqstat = vrtc_cmos_read(RTC_INTR_FLAGS);
+	spin_unlock(&rtc_lock);
+
+	irqstat &= RTC_IRQMASK | RTC_IRQF;
+	if (is_intr(irqstat)) {
+		rtc_update_irq(p, 1, irqstat);
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static int __init
+vrtc_mrst_do_probe(struct device *dev, struct resource *iomem, int rtc_irq)
+{
+	int retval = 0;
+	unsigned char rtc_control;
+
+	/* There can be only one ... */
+	if (mrst_rtc.dev)
+		return -EBUSY;
+
+	if (!iomem)
+		return -ENODEV;
+
+	iomem = request_mem_region(iomem->start,
+			iomem->end + 1 - iomem->start,
+			driver_name);
+	if (!iomem) {
+		dev_dbg(dev, "i/o mem already in use.\n");
+		return -EBUSY;
+	}
+
+	mrst_rtc.irq = rtc_irq;
+	mrst_rtc.iomem = iomem;
+
+	mrst_rtc.rtc = rtc_device_register(driver_name, dev,
+				&mrst_rtc_ops, THIS_MODULE);
+	if (IS_ERR(mrst_rtc.rtc)) {
+		retval = PTR_ERR(mrst_rtc.rtc);
+		goto cleanup0;
+	}
+
+	mrst_rtc.dev = dev;
+	dev_set_drvdata(dev, &mrst_rtc);
+	rename_region(iomem, dev_name(&mrst_rtc.rtc->dev));
+
+	spin_lock_irq(&rtc_lock);
+	mrst_irq_disable(&mrst_rtc, RTC_PIE | RTC_AIE);
+	rtc_control = vrtc_cmos_read(RTC_CONTROL);
+	spin_unlock_irq(&rtc_lock);
+
+	if (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY)))
+		dev_dbg(dev, "TODO: support more than 24-hr BCD mode\n");
+
+	if (rtc_irq) {
+		retval = request_irq(rtc_irq, mrst_rtc_irq,
+				IRQF_DISABLED, dev_name(&mrst_rtc.rtc->dev),
+				mrst_rtc.rtc);
+		if (retval < 0) {
+			dev_dbg(dev, "IRQ %d is already in use, err %d\n",
+				rtc_irq, retval);
+			goto cleanup1;
+		}
+	}
+	dev_dbg(dev, "initialised\n");
+	return 0;
+
+cleanup1:
+	mrst_rtc.dev = NULL;
+	rtc_device_unregister(mrst_rtc.rtc);
+cleanup0:
+	release_region(iomem->start, iomem->end + 1 - iomem->start);
+	dev_err(dev, "rtc-mrst: unable to initialise\n");
+	return retval;
+}
+
+static void rtc_mrst_do_shutdown(void)
+{
+	spin_lock_irq(&rtc_lock);
+	mrst_irq_disable(&mrst_rtc, RTC_IRQMASK);
+	spin_unlock_irq(&rtc_lock);
+}
+
+static void __exit rtc_mrst_do_remove(struct device *dev)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	struct resource *iomem;
+
+	rtc_mrst_do_shutdown();
+
+	if (mrst->irq)
+		free_irq(mrst->irq, mrst->rtc);
+
+	rtc_device_unregister(mrst->rtc);
+	mrst->rtc = NULL;
+
+	iomem = mrst->iomem;
+	release_region(iomem->start, iomem->end + 1 - iomem->start);
+	mrst->iomem = NULL;
+
+	mrst->dev = NULL;
+	dev_set_drvdata(dev, NULL);
+}
+
+#ifdef	CONFIG_PM
+static int mrst_suspend(struct device *dev, pm_message_t mesg)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned char	tmp;
+
+	/* Only the alarm might be a wakeup event source */
+	spin_lock_irq(&rtc_lock);
+	mrst->suspend_ctrl = tmp = vrtc_cmos_read(RTC_CONTROL);
+	if (tmp & (RTC_PIE | RTC_AIE)) {
+		unsigned char	mask;
+
+		if (device_may_wakeup(dev))
+			mask = RTC_IRQMASK & ~RTC_AIE;
+		else
+			mask = RTC_IRQMASK;
+		tmp &= ~mask;
+		vrtc_cmos_write(tmp, RTC_CONTROL);
+
+		mrst_checkintr(mrst, tmp);
+	}
+	spin_unlock_irq(&rtc_lock);
+
+	if (tmp & RTC_AIE) {
+		mrst->enabled_wake = 1;
+		enable_irq_wake(mrst->irq);
+	}
+
+	dev_dbg(&mrst_rtc.rtc->dev, "suspend%s, ctrl %02x\n",
+			(tmp & RTC_AIE) ? ", alarm may wake" : "",
+			tmp);
+
+	return 0;
+}
+
+/*
+ * We want RTC alarms to wake us from the deep power saving state
+ */
+static inline int mrst_poweroff(struct device *dev)
+{
+	return mrst_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int mrst_resume(struct device *dev)
+{
+	struct mrst_rtc	*mrst = dev_get_drvdata(dev);
+	unsigned char tmp = mrst->suspend_ctrl;
+
+	/* Re-enable any irqs previously active */
+	if (tmp & RTC_IRQMASK) {
+		unsigned char	mask;
+
+		if (mrst->enabled_wake) {
+			disable_irq_wake(mrst->irq);
+			mrst->enabled_wake = 0;
+		}
+
+		spin_lock_irq(&rtc_lock);
+		do {
+			vrtc_cmos_write(tmp, RTC_CONTROL);
+
+			mask = vrtc_cmos_read(RTC_INTR_FLAGS);
+			mask &= (tmp & RTC_IRQMASK) | RTC_IRQF;
+			if (!is_intr(mask))
+				break;
+
+			rtc_update_irq(mrst->rtc, 1, mask);
+			tmp &= ~RTC_AIE;
+		} while (mask & RTC_AIE);
+		spin_unlock_irq(&rtc_lock);
+	}
+
+	dev_dbg(&mrst_rtc.rtc->dev, "resume, ctrl %02x\n", tmp);
+
+	return 0;
+}
+
+#else
+#define	mrst_suspend	NULL
+#define	mrst_resume	NULL
+
+static inline int mrst_poweroff(struct device *dev)
+{
+	return -ENOSYS;
+}
+
+#endif
+
+static int __init vrtc_mrst_platform_probe(struct platform_device *pdev)
+{
+	return vrtc_mrst_do_probe(&pdev->dev,
+			platform_get_resource(pdev, IORESOURCE_MEM, 0),
+			platform_get_irq(pdev, 0));
+}
+
+static int __exit vrtc_mrst_platform_remove(struct platform_device *pdev)
+{
+	rtc_mrst_do_remove(&pdev->dev);
+	return 0;
+}
+
+static void vrtc_mrst_platform_shutdown(struct platform_device *pdev)
+{
+	if (system_state == SYSTEM_POWER_OFF && !mrst_poweroff(&pdev->dev))
+		return;
+
+	rtc_mrst_do_shutdown();
+}
+
+MODULE_ALIAS("platform:vrtc_mrst");
+
+static struct platform_driver vrtc_mrst_platform_driver = {
+	.probe		= vrtc_mrst_platform_probe,
+	.remove		= __exit_p(vrtc_mrst_platform_remove),
+	.shutdown	= vrtc_mrst_platform_shutdown,
+	.driver = {
+		.name		= (char *) driver_name,
+		.suspend	= mrst_suspend,
+		.resume		= mrst_resume,
+	}
+};
+
+static int __init vrtc_mrst_init(void)
+{
+	return platform_driver_register(&vrtc_mrst_platform_driver);
+}
+
+static void __exit vrtc_mrst_exit(void)
+{
+	platform_driver_unregister(&vrtc_mrst_platform_driver);
+}
+
+module_init(vrtc_mrst_init);
+module_exit(vrtc_mrst_exit);
+
+MODULE_AUTHOR("Jacob Pan; Feng Tang");
+MODULE_DESCRIPTION("Driver for Moorestown virtual RTC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-rs5c372.c b/drivers/rtc/rtc-rs5c372.c
index 90cf0a6ff23..dd14e202c2c 100644
--- a/drivers/rtc/rtc-rs5c372.c
+++ b/drivers/rtc/rtc-rs5c372.c
@@ -207,7 +207,7 @@ static int rs5c372_get_datetime(struct i2c_client *client, struct rtc_time *tm)
 static int rs5c372_set_datetime(struct i2c_client *client, struct rtc_time *tm)
 {
 	struct rs5c372	*rs5c = i2c_get_clientdata(client);
-	unsigned char	buf[8];
+	unsigned char	buf[7];
 	int		addr;
 
 	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d "
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index 1146e3522d3..af32a62e12a 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -650,7 +650,7 @@ static int __devexit rx8025_remove(struct i2c_client *client)
 		mutex_unlock(lock);
 
 		free_irq(client->irq, client);
-		flush_scheduled_work();
+		cancel_work_sync(&rx8025->work);
 	}
 
 	rx8025_sysfs_unregister(&client->dev);
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index e4a44b64170..88ea52b8647 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -39,10 +39,10 @@
 #include <mach/regs-ost.h>
 #endif
 
-#define RTC_DEF_DIVIDER		32768 - 1
+#define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM		0
 
-static unsigned long rtc_freq = 1024;
+static const unsigned long RTC_FREQ = 1024;
 static unsigned long timer_freq;
 static struct rtc_time rtc_alarm;
 static DEFINE_SPINLOCK(sa1100_rtc_lock);
@@ -61,7 +61,8 @@ static inline int rtc_periodic_alarm(struct rtc_time *tm)
  * Calculate the next alarm time given the requested alarm time mask
  * and the current time.
  */
-static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
+static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
+	struct rtc_time *alrm)
 {
 	unsigned long next_time;
 	unsigned long now_time;
@@ -116,7 +117,23 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 	rtsr = RTSR;
 	/* clear interrupt sources */
 	RTSR = 0;
-	RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
+	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
+	 * See also the comments in sa1100_rtc_probe(). */
+	if (rtsr & (RTSR_ALE | RTSR_HZE)) {
+		/* This is the original code, before there was the if test
+		 * above. This code does not clear interrupts that were not
+		 * enabled. */
+		RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
+	} else {
+		/* For some reason, it is possible to enter this routine
+		 * without interruptions enabled, it has been tested with
+		 * several units (Bug in SA11xx chip?).
+		 *
+		 * This situation leads to an infinite "loop" of interrupt
+		 * routine calling and as a result the processor seems to
+		 * lock on its first call to open(). */
+		RTSR = RTSR_AL | RTSR_HZ;
+	}
 
 	/* clear alarm interrupt if it has occurred */
 	if (rtsr & RTSR_AL)
@@ -139,8 +156,58 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static int sa1100_irq_set_freq(struct device *dev, int freq)
+{
+	if (freq < 1 || freq > timer_freq) {
+		return -EINVAL;
+	} else {
+		struct rtc_device *rtc = (struct rtc_device *)dev;
+
+		rtc->irq_freq = freq;
+
+		return 0;
+	}
+}
+
 static int rtc_timer1_count;
 
+static int sa1100_irq_set_state(struct device *dev, int enabled)
+{
+	spin_lock_irq(&sa1100_rtc_lock);
+	if (enabled) {
+		struct rtc_device *rtc = (struct rtc_device *)dev;
+
+		OSMR1 = timer_freq / rtc->irq_freq + OSCR;
+		OIER |= OIER_E1;
+		rtc_timer1_count = 1;
+	} else {
+		OIER &= ~OIER_E1;
+	}
+	spin_unlock_irq(&sa1100_rtc_lock);
+
+	return 0;
+}
+
+static inline int sa1100_timer1_retrigger(struct rtc_device *rtc)
+{
+	unsigned long diff;
+	unsigned long period = timer_freq / rtc->irq_freq;
+
+	spin_lock_irq(&sa1100_rtc_lock);
+
+	do {
+		OSMR1 += period;
+		diff = OSMR1 - OSCR;
+		/* If OSCR > OSMR1, diff is a very large number (unsigned
+		 * math). This means we have a lost interrupt. */
+	} while (diff > period);
+	OIER |= OIER_E1;
+
+	spin_unlock_irq(&sa1100_rtc_lock);
+
+	return 0;
+}
+
 static irqreturn_t timer1_interrupt(int irq, void *dev_id)
 {
 	struct platform_device *pdev = to_platform_device(dev_id);
@@ -158,7 +225,11 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
 	rtc_update_irq(rtc, rtc_timer1_count, RTC_PF | RTC_IRQF);
 
 	if (rtc_timer1_count == 1)
-		rtc_timer1_count = (rtc_freq * ((1 << 30) / (timer_freq >> 2)));
+		rtc_timer1_count =
+			(rtc->irq_freq * ((1 << 30) / (timer_freq >> 2)));
+
+	/* retrigger. */
+	sa1100_timer1_retrigger(rtc);
 
 	return IRQ_HANDLED;
 }
@@ -166,8 +237,10 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
 static int sa1100_rtc_read_callback(struct device *dev, int data)
 {
 	if (data & RTC_PF) {
+		struct rtc_device *rtc = (struct rtc_device *)dev;
+
 		/* interpolate missed periods and set match for the next */
-		unsigned long period = timer_freq / rtc_freq;
+		unsigned long period = timer_freq / rtc->irq_freq;
 		unsigned long oscr = OSCR;
 		unsigned long osmr1 = OSMR1;
 		unsigned long missed = (oscr - osmr1)/period;
@@ -178,7 +251,7 @@ static int sa1100_rtc_read_callback(struct device *dev, int data)
 		 * Here we compare (match - OSCR) 8 instead of 0 --
 		 * see comment in pxa_timer_interrupt() for explanation.
 		 */
-		while( (signed long)((osmr1 = OSMR1) - OSCR) <= 8 ) {
+		while ((signed long)((osmr1 = OSMR1) - OSCR) <= 8) {
 			data += 0x100;
 			OSSR = OSSR_M1;	/* clear match on timer 1 */
 			OSMR1 = osmr1 + period;
@@ -190,25 +263,29 @@ static int sa1100_rtc_read_callback(struct device *dev, int data)
 static int sa1100_rtc_open(struct device *dev)
 {
 	int ret;
+	struct rtc_device *rtc = (struct rtc_device *)dev;
 
 	ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
-				"rtc 1Hz", dev);
+		"rtc 1Hz", dev);
 	if (ret) {
 		dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
 		goto fail_ui;
 	}
 	ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
-				"rtc Alrm", dev);
+		"rtc Alrm", dev);
 	if (ret) {
 		dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
 		goto fail_ai;
 	}
 	ret = request_irq(IRQ_OST1, timer1_interrupt, IRQF_DISABLED,
-				"rtc timer", dev);
+		"rtc timer", dev);
 	if (ret) {
 		dev_err(dev, "IRQ %d already in use.\n", IRQ_OST1);
 		goto fail_pi;
 	}
+	rtc->max_user_freq = RTC_FREQ;
+	sa1100_irq_set_freq(dev, RTC_FREQ);
+
 	return 0;
 
  fail_pi:
@@ -236,7 +313,7 @@ static void sa1100_rtc_release(struct device *dev)
 static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd,
 		unsigned long arg)
 {
-	switch(cmd) {
+	switch (cmd) {
 	case RTC_AIE_OFF:
 		spin_lock_irq(&sa1100_rtc_lock);
 		RTSR &= ~RTSR_ALE;
@@ -257,25 +334,6 @@ static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd,
 		RTSR |= RTSR_HZE;
 		spin_unlock_irq(&sa1100_rtc_lock);
 		return 0;
-	case RTC_PIE_OFF:
-		spin_lock_irq(&sa1100_rtc_lock);
-		OIER &= ~OIER_E1;
-		spin_unlock_irq(&sa1100_rtc_lock);
-		return 0;
-	case RTC_PIE_ON:
-		spin_lock_irq(&sa1100_rtc_lock);
-		OSMR1 = timer_freq / rtc_freq + OSCR;
-		OIER |= OIER_E1;
-		rtc_timer1_count = 1;
-		spin_unlock_irq(&sa1100_rtc_lock);
-		return 0;
-	case RTC_IRQP_READ:
-		return put_user(rtc_freq, (unsigned long *)arg);
-	case RTC_IRQP_SET:
-		if (arg < 1 || arg > timer_freq)
-			return -EINVAL;
-		rtc_freq = arg;
-		return 0;
 	}
 	return -ENOIOCTLCMD;
 }
@@ -327,12 +385,15 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
 {
+	struct rtc_device *rtc = (struct rtc_device *)dev;
+
 	seq_printf(seq, "trim/divider\t: 0x%08x\n", (u32) RTTR);
 	seq_printf(seq, "update_IRQ\t: %s\n",
 			(RTSR & RTSR_HZE) ? "yes" : "no");
 	seq_printf(seq, "periodic_IRQ\t: %s\n",
 			(OIER & OIER_E1) ? "yes" : "no");
-	seq_printf(seq, "periodic_freq\t: %ld\n", rtc_freq);
+	seq_printf(seq, "periodic_freq\t: %d\n", rtc->irq_freq);
+	seq_printf(seq, "RTSR\t\t: 0x%08x\n", (u32)RTSR);
 
 	return 0;
 }
@@ -347,6 +408,8 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
 	.read_alarm = sa1100_rtc_read_alarm,
 	.set_alarm = sa1100_rtc_set_alarm,
 	.proc = sa1100_rtc_proc,
+	.irq_set_freq = sa1100_irq_set_freq,
+	.irq_set_state = sa1100_irq_set_state,
 };
 
 static int sa1100_rtc_probe(struct platform_device *pdev)
@@ -364,7 +427,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	 */
 	if (RTTR == 0) {
 		RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
-		dev_warn(&pdev->dev, "warning: initializing default clock divider/trim value\n");
+		dev_warn(&pdev->dev, "warning: "
+			"initializing default clock divider/trim value\n");
 		/* The current RTC value probably doesn't make sense either */
 		RCNR = 0;
 	}
@@ -372,13 +436,42 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
 	device_init_wakeup(&pdev->dev, 1);
 
 	rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
-				THIS_MODULE);
+		THIS_MODULE);
 
 	if (IS_ERR(rtc))
 		return PTR_ERR(rtc);
 
 	platform_set_drvdata(pdev, rtc);
 
+	/* Set the irq_freq */
+	/*TODO: Find out who is messing with this value after we initialize
+	 * it here.*/
+	rtc->irq_freq = RTC_FREQ;
+
+	/* Fix for a nasty initialization problem the in SA11xx RTSR register.
+	 * See also the comments in sa1100_rtc_interrupt().
+	 *
+	 * Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an
+	 * interrupt pending, even though interrupts were never enabled.
+	 * In this case, this bit it must be reset before enabling
+	 * interruptions to avoid a nonexistent interrupt to occur.
+	 *
+	 * In principle, the same problem would apply to bit 0, although it has
+	 * never been observed to happen.
+	 *
+	 * This issue is addressed both here and in sa1100_rtc_interrupt().
+	 * If the issue is not addressed here, in the times when the processor
+	 * wakes up with the bit set there will be one spurious interrupt.
+	 *
+	 * The issue is also dealt with in sa1100_rtc_interrupt() to be on the
+	 * safe side, once the condition that lead to this strange
+	 * initialization is unknown and could in principle happen during
+	 * normal processing.
+	 *
+	 * Notice that clearing bit 1 and 0 is accomplished by writting ONES to
+	 * the corresponding bits in RTSR. */
+	RTSR = RTSR_AL | RTSR_HZ;
+
 	return 0;
 }
 
@@ -386,7 +479,7 @@ static int sa1100_rtc_remove(struct platform_device *pdev)
 {
 	struct rtc_device *rtc = platform_get_drvdata(pdev);
 
- 	if (rtc)
+	if (rtc)
 		rtc_device_unregister(rtc);
 
 	return 0;
diff --git a/drivers/rtc/rtc-sh.c b/drivers/rtc/rtc-sh.c
index 5efbd5990ff..06e41ed9323 100644
--- a/drivers/rtc/rtc-sh.c
+++ b/drivers/rtc/rtc-sh.c
@@ -761,7 +761,7 @@ err_unmap:
 	clk_put(rtc->clk);
 	iounmap(rtc->regbase);
 err_badmap:
-	release_resource(rtc->res);
+	release_mem_region(rtc->res->start, rtc->regsize);
 err_badres:
 	kfree(rtc);
 
@@ -786,7 +786,7 @@ static int __exit sh_rtc_remove(struct platform_device *pdev)
 	}
 
 	iounmap(rtc->regbase);
-	release_resource(rtc->res);
+	release_mem_region(rtc->res->start, rtc->regsize);
 
 	clk_disable(rtc->clk);
 	clk_put(rtc->clk);
diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
index 07883197f47..8e477bb1f3f 100644
--- a/drivers/s390/block/Kconfig
+++ b/drivers/s390/block/Kconfig
@@ -2,7 +2,8 @@ comment "S/390 block device drivers"
 	depends on S390 && BLOCK
 
 config BLK_DEV_XPRAM
-	tristate "XPRAM disk support"
+	def_tristate m
+	prompt "XPRAM disk support"
 	depends on S390 && BLOCK
 	help
 	  Select this option if you want to use your expanded storage on S/390
@@ -12,13 +13,15 @@ config BLK_DEV_XPRAM
 	  xpram.  If unsure, say "N".
 
 config DCSSBLK
-	tristate "DCSSBLK support"
+	def_tristate m
+	prompt "DCSSBLK support"
 	depends on S390 && BLOCK
 	help
 	  Support for dcss block device
 
 config DASD
-	tristate "Support for DASD devices"
+	def_tristate y
+	prompt "Support for DASD devices"
 	depends on CCW && BLOCK
 	select IOSCHED_DEADLINE
 	help
@@ -27,28 +30,32 @@ config DASD
 	  natively on a single image or an LPAR.
 
 config DASD_PROFILE
-	bool "Profiling support for dasd devices"
+	def_bool y
+	prompt "Profiling support for dasd devices"
 	depends on DASD
 	help
 	  Enable this option if you want to see profiling information
           in /proc/dasd/statistics.
 
 config DASD_ECKD
-	tristate "Support for ECKD Disks"
+	def_tristate y
+	prompt "Support for ECKD Disks"
 	depends on DASD
 	help
 	  ECKD devices are the most commonly used devices. You should enable
 	  this option unless you are very sure to have no ECKD device.
 
 config DASD_FBA
-	tristate "Support for FBA  Disks"
+	def_tristate y
+	prompt "Support for FBA  Disks"
 	depends on DASD
 	help
 	  Select this option to be able to access FBA devices. It is safe to
 	  say "Y".
 
 config DASD_DIAG
-	tristate "Support for DIAG access to Disks"
+	def_tristate y
+	prompt "Support for DIAG access to Disks"
 	depends on DASD
 	help
 	  Select this option if you want to use Diagnose250 command to access
@@ -56,7 +63,8 @@ config DASD_DIAG
 	  say "N".
 
 config DASD_EER
-	bool "Extended error reporting (EER)"
+	def_bool y
+	prompt "Extended error reporting (EER)"
 	depends on DASD
 	help
 	  This driver provides a character device interface to the
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index fb613d70c2c..794bfd96226 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -11,6 +11,7 @@
 #define KMSG_COMPONENT "dasd"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/kernel_stat.h>
 #include <linux/kmod.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -368,6 +369,11 @@ dasd_state_ready_to_online(struct dasd_device * device)
 	device->state = DASD_STATE_ONLINE;
 	if (device->block) {
 		dasd_schedule_block_bh(device->block);
+		if ((device->features & DASD_FEATURE_USERAW)) {
+			disk = device->block->gdp;
+			kobject_uevent(&disk_to_dev(disk)->kobj, KOBJ_CHANGE);
+			return 0;
+		}
 		disk = device->block->bdev->bd_disk;
 		disk_part_iter_init(&piter, disk, DISK_PITER_INCL_PART0);
 		while ((part = disk_part_iter_next(&piter)))
@@ -393,7 +399,7 @@ static int dasd_state_online_to_ready(struct dasd_device *device)
 			return rc;
 	}
 	device->state = DASD_STATE_READY;
-	if (device->block) {
+	if (device->block && !(device->features & DASD_FEATURE_USERAW)) {
 		disk = device->block->bdev->bd_disk;
 		disk_part_iter_init(&piter, disk, DISK_PITER_INCL_PART0);
 		while ((part = disk_part_iter_next(&piter)))
@@ -744,10 +750,6 @@ struct dasd_ccw_req *dasd_smalloc_request(int magic, int cplength,
 	char *data;
 	int size;
 
-	/* Sanity checks */
-	BUG_ON(datasize > PAGE_SIZE ||
-	     (cplength*sizeof(struct ccw1)) > PAGE_SIZE);
-
 	size = (sizeof(struct dasd_ccw_req) + 7L) & -8L;
 	if (cplength > 0)
 		size += cplength * sizeof(struct ccw1);
@@ -853,7 +855,6 @@ int dasd_term_IO(struct dasd_ccw_req *cqr)
 		rc = ccw_device_clear(device->cdev, (long) cqr);
 		switch (rc) {
 		case 0:	/* termination successful */
-			cqr->retries--;
 			cqr->status = DASD_CQR_CLEAR_PENDING;
 			cqr->stopclk = get_clock();
 			cqr->starttime = 0;
@@ -905,6 +906,16 @@ int dasd_start_IO(struct dasd_ccw_req *cqr)
 		return rc;
 	}
 	device = (struct dasd_device *) cqr->startdev;
+	if (((cqr->block &&
+	      test_bit(DASD_FLAG_LOCK_STOLEN, &cqr->block->base->flags)) ||
+	     test_bit(DASD_FLAG_LOCK_STOLEN, &device->flags)) &&
+	    !test_bit(DASD_CQR_ALLOW_SLOCK, &cqr->flags)) {
+		DBF_DEV_EVENT(DBF_DEBUG, device, "start_IO: return request %p "
+			      "because of stolen lock", cqr);
+		cqr->status = DASD_CQR_ERROR;
+		cqr->intrc = -EPERM;
+		return -EPERM;
+	}
 	if (cqr->retries < 0) {
 		/* internal error 14 - start_IO run out of retries */
 		sprintf(errorstring, "14 %p", cqr);
@@ -916,6 +927,11 @@ int dasd_start_IO(struct dasd_ccw_req *cqr)
 	cqr->startclk = get_clock();
 	cqr->starttime = jiffies;
 	cqr->retries--;
+	if (!test_bit(DASD_CQR_VERIFY_PATH, &cqr->flags)) {
+		cqr->lpm &= device->path_data.opm;
+		if (!cqr->lpm)
+			cqr->lpm = device->path_data.opm;
+	}
 	if (cqr->cpmode == 1) {
 		rc = ccw_device_tm_start(device->cdev, cqr->cpaddr,
 					 (long) cqr, cqr->lpm);
@@ -928,35 +944,53 @@ int dasd_start_IO(struct dasd_ccw_req *cqr)
 		cqr->status = DASD_CQR_IN_IO;
 		break;
 	case -EBUSY:
-		DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			      "start_IO: device busy, retry later");
 		break;
 	case -ETIMEDOUT:
-		DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			      "start_IO: request timeout, retry later");
 		break;
 	case -EACCES:
-		/* -EACCES indicates that the request used only a
-		 * subset of the available pathes and all these
-		 * pathes are gone.
-		 * Do a retry with all available pathes.
+		/* -EACCES indicates that the request used only a subset of the
+		 * available paths and all these paths are gone. If the lpm of
+		 * this request was only a subset of the opm (e.g. the ppm) then
+		 * we just do a retry with all available paths.
+		 * If we already use the full opm, something is amiss, and we
+		 * need a full path verification.
 		 */
-		cqr->lpm = LPM_ANYPATH;
-		DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
-			      "start_IO: selected pathes gone,"
-			      " retry on all pathes");
+		if (test_bit(DASD_CQR_VERIFY_PATH, &cqr->flags)) {
+			DBF_DEV_EVENT(DBF_WARNING, device,
+				      "start_IO: selected paths gone (%x)",
+				      cqr->lpm);
+		} else if (cqr->lpm != device->path_data.opm) {
+			cqr->lpm = device->path_data.opm;
+			DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
+				      "start_IO: selected paths gone,"
+				      " retry on all paths");
+		} else {
+			DBF_DEV_EVENT(DBF_WARNING, device, "%s",
+				      "start_IO: all paths in opm gone,"
+				      " do path verification");
+			dasd_generic_last_path_gone(device);
+			device->path_data.opm = 0;
+			device->path_data.ppm = 0;
+			device->path_data.npm = 0;
+			device->path_data.tbvpm =
+				ccw_device_get_path_mask(device->cdev);
+		}
 		break;
 	case -ENODEV:
-		DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			      "start_IO: -ENODEV device gone, retry");
 		break;
 	case -EIO:
-		DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			      "start_IO: -EIO device gone, retry");
 		break;
 	case -EINVAL:
 		/* most likely caused in power management context */
-		DBF_DEV_EVENT(DBF_DEBUG, device, "%s",
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
 			      "start_IO: -EINVAL device currently "
 			      "not accessible");
 		break;
@@ -1076,6 +1110,7 @@ void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm,
 	unsigned long long now;
 	int expires;
 
+	kstat_cpu(smp_processor_id()).irqs[IOINT_DAS]++;
 	if (IS_ERR(irb)) {
 		switch (PTR_ERR(irb)) {
 		case -EIO:
@@ -1094,16 +1129,11 @@ void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm,
 	}
 
 	now = get_clock();
-
-	/* check for unsolicited interrupts */
 	cqr = (struct dasd_ccw_req *) intparm;
-	if (!cqr || ((scsw_cc(&irb->scsw) == 1) &&
-		     (scsw_fctl(&irb->scsw) & SCSW_FCTL_START_FUNC) &&
-		     ((scsw_stctl(&irb->scsw) == SCSW_STCTL_STATUS_PEND) ||
-		      (scsw_stctl(&irb->scsw) == (SCSW_STCTL_STATUS_PEND |
-						  SCSW_STCTL_ALERT_STATUS))))) {
-		if (cqr && cqr->status == DASD_CQR_IN_IO)
-			cqr->status = DASD_CQR_QUEUED;
+	/* check for conditions that should be handled immediately */
+	if (!cqr ||
+	    !(scsw_dstat(&irb->scsw) == (DEV_STAT_CHN_END | DEV_STAT_DEV_END) &&
+	      scsw_cstat(&irb->scsw) == 0)) {
 		if (cqr)
 			memcpy(&cqr->irb, irb, sizeof(*irb));
 		device = dasd_device_from_cdev_locked(cdev);
@@ -1114,17 +1144,14 @@ void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm,
 			dasd_put_device(device);
 			return;
 		}
-		device->discipline->dump_sense_dbf(device, irb,
-						   "unsolicited");
-		if ((device->features & DASD_FEATURE_ERPLOG))
-			device->discipline->dump_sense(device, cqr,
-						       irb);
-		dasd_device_clear_timer(device);
-		device->discipline->handle_unsolicited_interrupt(device,
-								 irb);
+		device->discipline->dump_sense_dbf(device, irb, "int");
+		if (device->features & DASD_FEATURE_ERPLOG)
+			device->discipline->dump_sense(device, cqr, irb);
+		device->discipline->check_for_device_change(device, cqr, irb);
 		dasd_put_device(device);
-		return;
 	}
+	if (!cqr)
+		return;
 
 	device = (struct dasd_device *) cqr->startdev;
 	if (!device ||
@@ -1164,25 +1191,19 @@ void dasd_int_handler(struct ccw_device *cdev, unsigned long intparm,
 					  struct dasd_ccw_req, devlist);
 		}
 	} else {  /* error */
-		memcpy(&cqr->irb, irb, sizeof(struct irb));
-		/* log sense for every failed I/O to s390 debugfeature */
-		dasd_log_sense_dbf(cqr, irb);
-		if (device->features & DASD_FEATURE_ERPLOG) {
-			dasd_log_sense(cqr, irb);
-		}
-
 		/*
 		 * If we don't want complex ERP for this request, then just
 		 * reset this and retry it in the fastpath
 		 */
 		if (!test_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags) &&
 		    cqr->retries > 0) {
-			if (cqr->lpm == LPM_ANYPATH)
+			if (cqr->lpm == device->path_data.opm)
 				DBF_DEV_EVENT(DBF_DEBUG, device,
 					      "default ERP in fastpath "
 					      "(%i retries left)",
 					      cqr->retries);
-			cqr->lpm    = LPM_ANYPATH;
+			if (!test_bit(DASD_CQR_VERIFY_PATH, &cqr->flags))
+				cqr->lpm = device->path_data.opm;
 			cqr->status = DASD_CQR_QUEUED;
 			next = cqr;
 		} else
@@ -1210,13 +1231,13 @@ enum uc_todo dasd_generic_uc_handler(struct ccw_device *cdev, struct irb *irb)
 		goto out;
 	if (test_bit(DASD_FLAG_OFFLINE, &device->flags) ||
 	   device->state != device->target ||
-	   !device->discipline->handle_unsolicited_interrupt){
+	   !device->discipline->check_for_device_change){
 		dasd_put_device(device);
 		goto out;
 	}
-
-	dasd_device_clear_timer(device);
-	device->discipline->handle_unsolicited_interrupt(device, irb);
+	if (device->discipline->dump_sense_dbf)
+		device->discipline->dump_sense_dbf(device, irb, "uc");
+	device->discipline->check_for_device_change(device, NULL, irb);
 	dasd_put_device(device);
 out:
 	return UC_TODO_RETRY;
@@ -1366,8 +1387,14 @@ static void __dasd_device_start_head(struct dasd_device *device)
 	cqr = list_entry(device->ccw_queue.next, struct dasd_ccw_req, devlist);
 	if (cqr->status != DASD_CQR_QUEUED)
 		return;
-	/* when device is stopped, return request to previous layer */
-	if (device->stopped) {
+	/* when device is stopped, return request to previous layer
+	 * exception: only the disconnect or unresumed bits are set and the
+	 * cqr is a path verification request
+	 */
+	if (device->stopped &&
+	    !(!(device->stopped & ~(DASD_STOPPED_DC_WAIT | DASD_UNRESUMED_PM))
+	      && test_bit(DASD_CQR_VERIFY_PATH, &cqr->flags))) {
+		cqr->intrc = -EAGAIN;
 		cqr->status = DASD_CQR_CLEARED;
 		dasd_schedule_device_bh(device);
 		return;
@@ -1383,6 +1410,23 @@ static void __dasd_device_start_head(struct dasd_device *device)
 		dasd_device_set_timer(device, 50);
 }
 
+static void __dasd_device_check_path_events(struct dasd_device *device)
+{
+	int rc;
+
+	if (device->path_data.tbvpm) {
+		if (device->stopped & ~(DASD_STOPPED_DC_WAIT |
+					DASD_UNRESUMED_PM))
+			return;
+		rc = device->discipline->verify_path(
+			device, device->path_data.tbvpm);
+		if (rc)
+			dasd_device_set_timer(device, 50);
+		else
+			device->path_data.tbvpm = 0;
+	}
+};
+
 /*
  * Go through all request on the dasd_device request queue,
  * terminate them on the cdev if necessary, and return them to the
@@ -1457,6 +1501,7 @@ static void dasd_device_tasklet(struct dasd_device *device)
 	__dasd_device_check_expire(device);
 	/* find final requests on ccw queue */
 	__dasd_device_process_ccw_queue(device, &final_queue);
+	__dasd_device_check_path_events(device);
 	spin_unlock_irq(get_ccwdev_lock(device->cdev));
 	/* Now call the callback function of requests with final status */
 	__dasd_device_process_final_queue(device, &final_queue);
@@ -1613,7 +1658,12 @@ static int _dasd_sleep_on(struct dasd_ccw_req *maincqr, int interruptible)
 			continue;
 		if (cqr->status != DASD_CQR_FILLED) /* could be failed */
 			continue;
-
+		if (test_bit(DASD_FLAG_LOCK_STOLEN, &device->flags) &&
+		    !test_bit(DASD_CQR_ALLOW_SLOCK, &cqr->flags)) {
+			cqr->status = DASD_CQR_FAILED;
+			cqr->intrc = -EPERM;
+			continue;
+		}
 		/* Non-temporary stop condition will trigger fail fast */
 		if (device->stopped & ~DASD_STOPPED_PENDING &&
 		    test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) &&
@@ -1621,7 +1671,6 @@ static int _dasd_sleep_on(struct dasd_ccw_req *maincqr, int interruptible)
 			cqr->status = DASD_CQR_FAILED;
 			continue;
 		}
-
 		/* Don't try to start requests if device is stopped */
 		if (interruptible) {
 			rc = wait_event_interruptible(
@@ -1706,13 +1755,18 @@ int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr)
 	int rc;
 
 	device = cqr->startdev;
+	if (test_bit(DASD_FLAG_LOCK_STOLEN, &device->flags) &&
+	    !test_bit(DASD_CQR_ALLOW_SLOCK, &cqr->flags)) {
+		cqr->status = DASD_CQR_FAILED;
+		cqr->intrc = -EPERM;
+		return -EIO;
+	}
 	spin_lock_irq(get_ccwdev_lock(device->cdev));
 	rc = _dasd_term_running_cqr(device);
 	if (rc) {
 		spin_unlock_irq(get_ccwdev_lock(device->cdev));
 		return rc;
 	}
-
 	cqr->callback = dasd_wakeup_cb;
 	cqr->callback_data = DASD_SLEEPON_START_TAG;
 	cqr->status = DASD_CQR_QUEUED;
@@ -2016,6 +2070,13 @@ static void __dasd_block_start_head(struct dasd_block *block)
 	list_for_each_entry(cqr, &block->ccw_queue, blocklist) {
 		if (cqr->status != DASD_CQR_FILLED)
 			continue;
+		if (test_bit(DASD_FLAG_LOCK_STOLEN, &block->base->flags) &&
+		    !test_bit(DASD_CQR_ALLOW_SLOCK, &cqr->flags)) {
+			cqr->status = DASD_CQR_FAILED;
+			cqr->intrc = -EPERM;
+			dasd_schedule_block_bh(block);
+			continue;
+		}
 		/* Non-temporary stop condition will trigger fail fast */
 		if (block->base->stopped & ~DASD_STOPPED_PENDING &&
 		    test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) &&
@@ -2201,8 +2262,20 @@ static void dasd_setup_queue(struct dasd_block *block)
 {
 	int max;
 
-	blk_queue_logical_block_size(block->request_queue, block->bp_block);
-	max = block->base->discipline->max_blocks << block->s2b_shift;
+	if (block->base->features & DASD_FEATURE_USERAW) {
+		/*
+		 * the max_blocks value for raw_track access is 256
+		 * it is higher than the native ECKD value because we
+		 * only need one ccw per track
+		 * so the max_hw_sectors are
+		 * 2048 x 512B = 1024kB = 16 tracks
+		 */
+		max = 2048;
+	} else {
+		max = block->base->discipline->max_blocks << block->s2b_shift;
+	}
+	blk_queue_logical_block_size(block->request_queue,
+				     block->bp_block);
 	blk_queue_max_hw_sectors(block->request_queue, max);
 	blk_queue_max_segments(block->request_queue, -1L);
 	/* with page sized segments we can translate each segement into
@@ -2588,10 +2661,53 @@ int dasd_generic_set_offline(struct ccw_device *cdev)
 	return 0;
 }
 
+int dasd_generic_last_path_gone(struct dasd_device *device)
+{
+	struct dasd_ccw_req *cqr;
+
+	dev_warn(&device->cdev->dev, "No operational channel path is left "
+		 "for the device\n");
+	DBF_DEV_EVENT(DBF_WARNING, device, "%s", "last path gone");
+	/* First of all call extended error reporting. */
+	dasd_eer_write(device, NULL, DASD_EER_NOPATH);
+
+	if (device->state < DASD_STATE_BASIC)
+		return 0;
+	/* Device is active. We want to keep it. */
+	list_for_each_entry(cqr, &device->ccw_queue, devlist)
+		if ((cqr->status == DASD_CQR_IN_IO) ||
+		    (cqr->status == DASD_CQR_CLEAR_PENDING)) {
+			cqr->status = DASD_CQR_QUEUED;
+			cqr->retries++;
+		}
+	dasd_device_set_stop_bits(device, DASD_STOPPED_DC_WAIT);
+	dasd_device_clear_timer(device);
+	dasd_schedule_device_bh(device);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(dasd_generic_last_path_gone);
+
+int dasd_generic_path_operational(struct dasd_device *device)
+{
+	dev_info(&device->cdev->dev, "A channel path to the device has become "
+		 "operational\n");
+	DBF_DEV_EVENT(DBF_WARNING, device, "%s", "path operational");
+	dasd_device_remove_stop_bits(device, DASD_STOPPED_DC_WAIT);
+	if (device->stopped & DASD_UNRESUMED_PM) {
+		dasd_device_remove_stop_bits(device, DASD_UNRESUMED_PM);
+		dasd_restore_device(device);
+		return 1;
+	}
+	dasd_schedule_device_bh(device);
+	if (device->block)
+		dasd_schedule_block_bh(device->block);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(dasd_generic_path_operational);
+
 int dasd_generic_notify(struct ccw_device *cdev, int event)
 {
 	struct dasd_device *device;
-	struct dasd_ccw_req *cqr;
 	int ret;
 
 	device = dasd_device_from_cdev_locked(cdev);
@@ -2602,41 +2718,64 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 	case CIO_GONE:
 	case CIO_BOXED:
 	case CIO_NO_PATH:
-		/* First of all call extended error reporting. */
-		dasd_eer_write(device, NULL, DASD_EER_NOPATH);
-
-		if (device->state < DASD_STATE_BASIC)
-			break;
-		/* Device is active. We want to keep it. */
-		list_for_each_entry(cqr, &device->ccw_queue, devlist)
-			if (cqr->status == DASD_CQR_IN_IO) {
-				cqr->status = DASD_CQR_QUEUED;
-				cqr->retries++;
-			}
-		dasd_device_set_stop_bits(device, DASD_STOPPED_DC_WAIT);
-		dasd_device_clear_timer(device);
-		dasd_schedule_device_bh(device);
-		ret = 1;
+		device->path_data.opm = 0;
+		device->path_data.ppm = 0;
+		device->path_data.npm = 0;
+		ret = dasd_generic_last_path_gone(device);
 		break;
 	case CIO_OPER:
-		/* FIXME: add a sanity check. */
-		dasd_device_remove_stop_bits(device, DASD_STOPPED_DC_WAIT);
-		if (device->stopped & DASD_UNRESUMED_PM) {
-			dasd_device_remove_stop_bits(device, DASD_UNRESUMED_PM);
-			dasd_restore_device(device);
-			ret = 1;
-			break;
-		}
-		dasd_schedule_device_bh(device);
-		if (device->block)
-			dasd_schedule_block_bh(device->block);
 		ret = 1;
+		if (device->path_data.opm)
+			ret = dasd_generic_path_operational(device);
 		break;
 	}
 	dasd_put_device(device);
 	return ret;
 }
 
+void dasd_generic_path_event(struct ccw_device *cdev, int *path_event)
+{
+	int chp;
+	__u8 oldopm, eventlpm;
+	struct dasd_device *device;
+
+	device = dasd_device_from_cdev_locked(cdev);
+	if (IS_ERR(device))
+		return;
+	for (chp = 0; chp < 8; chp++) {
+		eventlpm = 0x80 >> chp;
+		if (path_event[chp] & PE_PATH_GONE) {
+			oldopm = device->path_data.opm;
+			device->path_data.opm &= ~eventlpm;
+			device->path_data.ppm &= ~eventlpm;
+			device->path_data.npm &= ~eventlpm;
+			if (oldopm && !device->path_data.opm)
+				dasd_generic_last_path_gone(device);
+		}
+		if (path_event[chp] & PE_PATH_AVAILABLE) {
+			device->path_data.opm &= ~eventlpm;
+			device->path_data.ppm &= ~eventlpm;
+			device->path_data.npm &= ~eventlpm;
+			device->path_data.tbvpm |= eventlpm;
+			dasd_schedule_device_bh(device);
+		}
+	}
+	dasd_put_device(device);
+}
+EXPORT_SYMBOL_GPL(dasd_generic_path_event);
+
+int dasd_generic_verify_path(struct dasd_device *device, __u8 lpm)
+{
+	if (!device->path_data.opm && lpm) {
+		device->path_data.opm = lpm;
+		dasd_generic_path_operational(device);
+	} else
+		device->path_data.opm |= lpm;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dasd_generic_verify_path);
+
+
 int dasd_generic_pm_freeze(struct ccw_device *cdev)
 {
 	struct dasd_ccw_req *cqr, *n;
@@ -2646,6 +2785,10 @@ int dasd_generic_pm_freeze(struct ccw_device *cdev)
 
 	if (IS_ERR(device))
 		return PTR_ERR(device);
+
+	if (device->discipline->freeze)
+		rc = device->discipline->freeze(device);
+
 	/* disallow new I/O  */
 	dasd_device_set_stop_bits(device, DASD_STOPPED_PM);
 	/* clear active requests */
@@ -2682,9 +2825,6 @@ int dasd_generic_pm_freeze(struct ccw_device *cdev)
 	list_splice_tail(&freeze_queue, &device->ccw_queue);
 	spin_unlock_irq(get_ccwdev_lock(cdev));
 
-	if (device->discipline->freeze)
-		rc = device->discipline->freeze(device);
-
 	dasd_put_device(device);
 	return rc;
 }
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 968c76cf712..1654a24817b 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -152,9 +152,9 @@ dasd_3990_erp_alternate_path(struct dasd_ccw_req * erp)
 	spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
 	opm = ccw_device_get_path_mask(device->cdev);
 	spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
-	//FIXME: start with get_opm ?
 	if (erp->lpm == 0)
-		erp->lpm = LPM_ANYPATH & ~(erp->irb.esw.esw0.sublog.lpum);
+		erp->lpm = device->path_data.opm &
+			~(erp->irb.esw.esw0.sublog.lpum);
 	else
 		erp->lpm &= ~(erp->irb.esw.esw0.sublog.lpum);
 
@@ -270,10 +270,11 @@ static struct dasd_ccw_req *dasd_3990_erp_action_1(struct dasd_ccw_req *erp)
 {
 	erp->function = dasd_3990_erp_action_1;
 	dasd_3990_erp_alternate_path(erp);
-	if (erp->status == DASD_CQR_FAILED) {
+	if (erp->status == DASD_CQR_FAILED &&
+	    !test_bit(DASD_CQR_VERIFY_PATH, &erp->flags)) {
 		erp->status = DASD_CQR_FILLED;
 		erp->retries = 10;
-		erp->lpm = LPM_ANYPATH;
+		erp->lpm = erp->startdev->path_data.opm;
 		erp->function = dasd_3990_erp_action_1_sec;
 	}
 	return erp;
@@ -1907,15 +1908,14 @@ dasd_3990_erp_compound_retry(struct dasd_ccw_req * erp, char *sense)
 static void
 dasd_3990_erp_compound_path(struct dasd_ccw_req * erp, char *sense)
 {
-
 	if (sense[25] & DASD_SENSE_BIT_3) {
 		dasd_3990_erp_alternate_path(erp);
 
-		if (erp->status == DASD_CQR_FAILED) {
+		if (erp->status == DASD_CQR_FAILED &&
+		    !test_bit(DASD_CQR_VERIFY_PATH, &erp->flags)) {
 			/* reset the lpm and the status to be able to
 			 * try further actions. */
-
-			erp->lpm = 0;
+			erp->lpm = erp->startdev->path_data.opm;
 			erp->status = DASD_CQR_NEED_ERP;
 		}
 	}
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index 8d41f3ed38d..cb6a67bc89f 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -208,6 +208,8 @@ dasd_feature_list(char *str, char **endp)
 			features |= DASD_FEATURE_READONLY;
 		else if (len == 4 && !strncmp(str, "diag", 4))
 			features |= DASD_FEATURE_USEDIAG;
+		else if (len == 3 && !strncmp(str, "raw", 3))
+			features |= DASD_FEATURE_USERAW;
 		else if (len == 6 && !strncmp(str, "erplog", 6))
 			features |= DASD_FEATURE_ERPLOG;
 		else if (len == 8 && !strncmp(str, "failfast", 8))
@@ -639,6 +641,7 @@ dasd_put_device_wake(struct dasd_device *device)
 {
 	wake_up(&dasd_delete_wq);
 }
+EXPORT_SYMBOL_GPL(dasd_put_device_wake);
 
 /*
  * Return dasd_device structure associated with cdev.
@@ -856,7 +859,7 @@ dasd_use_diag_store(struct device *dev, struct device_attribute *attr,
 	spin_lock(&dasd_devmap_lock);
 	/* Changing diag discipline flag is only allowed in offline state. */
 	rc = count;
-	if (!devmap->device) {
+	if (!devmap->device && !(devmap->features & DASD_FEATURE_USERAW)) {
 		if (val)
 			devmap->features |= DASD_FEATURE_USEDIAG;
 		else
@@ -869,6 +872,56 @@ dasd_use_diag_store(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(use_diag, 0644, dasd_use_diag_show, dasd_use_diag_store);
 
+/*
+ * use_raw controls whether the driver should give access to raw eckd data or
+ * operate in standard mode
+ */
+static ssize_t
+dasd_use_raw_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct dasd_devmap *devmap;
+	int use_raw;
+
+	devmap = dasd_find_busid(dev_name(dev));
+	if (!IS_ERR(devmap))
+		use_raw = (devmap->features & DASD_FEATURE_USERAW) != 0;
+	else
+		use_raw = (DASD_FEATURE_DEFAULT & DASD_FEATURE_USERAW) != 0;
+	return sprintf(buf, use_raw ? "1\n" : "0\n");
+}
+
+static ssize_t
+dasd_use_raw_store(struct device *dev, struct device_attribute *attr,
+		    const char *buf, size_t count)
+{
+	struct dasd_devmap *devmap;
+	ssize_t rc;
+	unsigned long val;
+
+	devmap = dasd_devmap_from_cdev(to_ccwdev(dev));
+	if (IS_ERR(devmap))
+		return PTR_ERR(devmap);
+
+	if ((strict_strtoul(buf, 10, &val) != 0) || val > 1)
+		return -EINVAL;
+
+	spin_lock(&dasd_devmap_lock);
+	/* Changing diag discipline flag is only allowed in offline state. */
+	rc = count;
+	if (!devmap->device && !(devmap->features & DASD_FEATURE_USEDIAG)) {
+		if (val)
+			devmap->features |= DASD_FEATURE_USERAW;
+		else
+			devmap->features &= ~DASD_FEATURE_USERAW;
+	} else
+		rc = -EPERM;
+	spin_unlock(&dasd_devmap_lock);
+	return rc;
+}
+
+static DEVICE_ATTR(raw_track_access, 0644, dasd_use_raw_show,
+		   dasd_use_raw_store);
+
 static ssize_t
 dasd_discipline_show(struct device *dev, struct device_attribute *attr,
 		     char *buf)
@@ -1126,6 +1179,103 @@ dasd_expires_store(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(expires, 0644, dasd_expires_show, dasd_expires_store);
 
+static ssize_t dasd_reservation_policy_show(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf)
+{
+	struct dasd_devmap *devmap;
+	int rc = 0;
+
+	devmap = dasd_find_busid(dev_name(dev));
+	if (IS_ERR(devmap)) {
+		rc = snprintf(buf, PAGE_SIZE, "ignore\n");
+	} else {
+		spin_lock(&dasd_devmap_lock);
+		if (devmap->features & DASD_FEATURE_FAILONSLCK)
+			rc = snprintf(buf, PAGE_SIZE, "fail\n");
+		else
+			rc = snprintf(buf, PAGE_SIZE, "ignore\n");
+		spin_unlock(&dasd_devmap_lock);
+	}
+	return rc;
+}
+
+static ssize_t dasd_reservation_policy_store(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count)
+{
+	struct dasd_devmap *devmap;
+	int rc;
+
+	devmap = dasd_devmap_from_cdev(to_ccwdev(dev));
+	if (IS_ERR(devmap))
+		return PTR_ERR(devmap);
+	rc = 0;
+	spin_lock(&dasd_devmap_lock);
+	if (sysfs_streq("ignore", buf))
+		devmap->features &= ~DASD_FEATURE_FAILONSLCK;
+	else if (sysfs_streq("fail", buf))
+		devmap->features |= DASD_FEATURE_FAILONSLCK;
+	else
+		rc = -EINVAL;
+	if (devmap->device)
+		devmap->device->features = devmap->features;
+	spin_unlock(&dasd_devmap_lock);
+	if (rc)
+		return rc;
+	else
+		return count;
+}
+
+static DEVICE_ATTR(reservation_policy, 0644,
+		   dasd_reservation_policy_show, dasd_reservation_policy_store);
+
+static ssize_t dasd_reservation_state_show(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct dasd_device *device;
+	int rc = 0;
+
+	device = dasd_device_from_cdev(to_ccwdev(dev));
+	if (IS_ERR(device))
+		return snprintf(buf, PAGE_SIZE, "none\n");
+
+	if (test_bit(DASD_FLAG_IS_RESERVED, &device->flags))
+		rc = snprintf(buf, PAGE_SIZE, "reserved\n");
+	else if (test_bit(DASD_FLAG_LOCK_STOLEN, &device->flags))
+		rc = snprintf(buf, PAGE_SIZE, "lost\n");
+	else
+		rc = snprintf(buf, PAGE_SIZE, "none\n");
+	dasd_put_device(device);
+	return rc;
+}
+
+static ssize_t dasd_reservation_state_store(struct device *dev,
+					    struct device_attribute *attr,
+					    const char *buf, size_t count)
+{
+	struct dasd_device *device;
+	int rc = 0;
+
+	device = dasd_device_from_cdev(to_ccwdev(dev));
+	if (IS_ERR(device))
+		return -ENODEV;
+	if (sysfs_streq("reset", buf))
+		clear_bit(DASD_FLAG_LOCK_STOLEN, &device->flags);
+	else
+		rc = -EINVAL;
+	dasd_put_device(device);
+
+	if (rc)
+		return rc;
+	else
+		return count;
+}
+
+static DEVICE_ATTR(last_known_reservation_state, 0644,
+		   dasd_reservation_state_show, dasd_reservation_state_store);
+
 static struct attribute * dasd_attrs[] = {
 	&dev_attr_readonly.attr,
 	&dev_attr_discipline.attr,
@@ -1134,10 +1284,13 @@ static struct attribute * dasd_attrs[] = {
 	&dev_attr_vendor.attr,
 	&dev_attr_uid.attr,
 	&dev_attr_use_diag.attr,
+	&dev_attr_raw_track_access.attr,
 	&dev_attr_eer_enabled.attr,
 	&dev_attr_erplog.attr,
 	&dev_attr_failfast.attr,
 	&dev_attr_expires.attr,
+	&dev_attr_reservation_policy.attr,
+	&dev_attr_last_known_reservation_state.attr,
 	NULL,
 };
 
diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c
index 266b34b5540..29143eda9dd 100644
--- a/drivers/s390/block/dasd_diag.c
+++ b/drivers/s390/block/dasd_diag.c
@@ -10,6 +10,7 @@
 
 #define KMSG_COMPONENT "dasd"
 
+#include <linux/kernel_stat.h>
 #include <linux/stddef.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
@@ -238,6 +239,7 @@ static void dasd_ext_handler(unsigned int ext_int_code,
 	addr_t ip;
 	int rc;
 
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_DSD]++;
 	switch (ext_int_code >> 24) {
 	case DASD_DIAG_CODE_31BIT:
 		ip = (addr_t) param32;
@@ -617,6 +619,7 @@ static struct dasd_discipline dasd_diag_discipline = {
 	.ebcname = "DIAG",
 	.max_blocks = DIAG_MAX_BLOCKS,
 	.check_device = dasd_diag_check_device,
+	.verify_path = dasd_generic_verify_path,
 	.fill_geometry = dasd_diag_fill_geometry,
 	.start_IO = dasd_start_diag,
 	.term_IO = dasd_diag_term_IO,
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index bf61274af3b..318672d0556 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -54,6 +54,15 @@
 #define ECKD_F7(i) (i->factor7)
 #define ECKD_F8(i) (i->factor8)
 
+/*
+ * raw track access always map to 64k in memory
+ * so it maps to 16 blocks of 4k per track
+ */
+#define DASD_RAW_BLOCK_PER_TRACK 16
+#define DASD_RAW_BLOCKSIZE 4096
+/* 64k are 128 x 512 byte sectors  */
+#define DASD_RAW_SECTORS_PER_TRACK 128
+
 MODULE_LICENSE("GPL");
 
 static struct dasd_discipline dasd_eckd_discipline;
@@ -90,6 +99,18 @@ static struct {
 } *dasd_reserve_req;
 static DEFINE_MUTEX(dasd_reserve_mutex);
 
+/* definitions for the path verification worker */
+struct path_verification_work_data {
+	struct work_struct worker;
+	struct dasd_device *device;
+	struct dasd_ccw_req cqr;
+	struct ccw1 ccw;
+	__u8 rcd_buffer[DASD_ECKD_RCD_DATA_SIZE];
+	int isglobal;
+	__u8 tbvpm;
+};
+static struct path_verification_work_data *path_verification_worker;
+static DEFINE_MUTEX(dasd_path_verification_mutex);
 
 /* initial attempt at a probe function. this can be simplified once
  * the other detection code is gone */
@@ -373,6 +394,23 @@ static void fill_LRE_data(struct LRE_eckd_data *data, unsigned int trk,
 		data->length = reclen;
 		data->operation.operation = 0x03;
 		break;
+	case DASD_ECKD_CCW_WRITE_FULL_TRACK:
+		data->operation.orientation = 0x0;
+		data->operation.operation = 0x3F;
+		data->extended_operation = 0x11;
+		data->length = 0;
+		data->extended_parameter_length = 0x02;
+		if (data->count > 8) {
+			data->extended_parameter[0] = 0xFF;
+			data->extended_parameter[1] = 0xFF;
+			data->extended_parameter[1] <<= (16 - count);
+		} else {
+			data->extended_parameter[0] = 0xFF;
+			data->extended_parameter[0] <<= (8 - count);
+			data->extended_parameter[1] = 0x00;
+		}
+		data->sector = 0xFF;
+		break;
 	case DASD_ECKD_CCW_WRITE_TRACK_DATA:
 		data->auxiliary.length_valid = 0x1;
 		data->length = reclen;	/* not tlf, as one might think */
@@ -396,6 +434,12 @@ static void fill_LRE_data(struct LRE_eckd_data *data, unsigned int trk,
 	case DASD_ECKD_CCW_READ_COUNT:
 		data->operation.operation = 0x06;
 		break;
+	case DASD_ECKD_CCW_READ_TRACK:
+		data->operation.orientation = 0x1;
+		data->operation.operation = 0x0C;
+		data->extended_parameter_length = 0;
+		data->sector = 0xFF;
+		break;
 	case DASD_ECKD_CCW_READ_TRACK_DATA:
 		data->auxiliary.length_valid = 0x1;
 		data->length = tlf;
@@ -439,10 +483,16 @@ static int prefix_LRE(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata,
 
 	ccw->cmd_code = DASD_ECKD_CCW_PFX;
 	ccw->flags = 0;
-	ccw->count = sizeof(*pfxdata);
-	ccw->cda = (__u32) __pa(pfxdata);
+	if (cmd == DASD_ECKD_CCW_WRITE_FULL_TRACK) {
+		ccw->count = sizeof(*pfxdata) + 2;
+		ccw->cda = (__u32) __pa(pfxdata);
+		memset(pfxdata, 0, sizeof(*pfxdata) + 2);
+	} else {
+		ccw->count = sizeof(*pfxdata);
+		ccw->cda = (__u32) __pa(pfxdata);
+		memset(pfxdata, 0, sizeof(*pfxdata));
+	}
 
-	memset(pfxdata, 0, sizeof(*pfxdata));
 	/* prefix data */
 	if (format > 1) {
 		DBF_DEV_EVENT(DBF_ERR, basedev,
@@ -476,6 +526,7 @@ static int prefix_LRE(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata,
 		dedata->mask.perm = 0x1;
 		dedata->attributes.operation = basepriv->attrib.operation;
 		break;
+	case DASD_ECKD_CCW_READ_TRACK:
 	case DASD_ECKD_CCW_READ_TRACK_DATA:
 		dedata->mask.perm = 0x1;
 		dedata->attributes.operation = basepriv->attrib.operation;
@@ -502,6 +553,11 @@ static int prefix_LRE(struct ccw1 *ccw, struct PFX_eckd_data *pfxdata,
 		dedata->attributes.operation = DASD_BYPASS_CACHE;
 		rc = check_XRC_on_prefix(pfxdata, basedev);
 		break;
+	case DASD_ECKD_CCW_WRITE_FULL_TRACK:
+		dedata->mask.perm = 0x03;
+		dedata->attributes.operation = basepriv->attrib.operation;
+		dedata->blk_size = 0;
+		break;
 	case DASD_ECKD_CCW_WRITE_TRACK_DATA:
 		dedata->mask.perm = 0x02;
 		dedata->attributes.operation = basepriv->attrib.operation;
@@ -755,26 +811,27 @@ static int dasd_eckd_get_uid(struct dasd_device *device, struct dasd_uid *uid)
 	return -EINVAL;
 }
 
-static struct dasd_ccw_req *dasd_eckd_build_rcd_lpm(struct dasd_device *device,
-						    void *rcd_buffer,
-						    struct ciw *ciw, __u8 lpm)
+static void dasd_eckd_fill_rcd_cqr(struct dasd_device *device,
+				   struct dasd_ccw_req *cqr,
+				   __u8 *rcd_buffer,
+				   __u8 lpm)
 {
-	struct dasd_ccw_req *cqr;
 	struct ccw1 *ccw;
-
-	cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* RCD */, ciw->count,
-				   device);
-
-	if (IS_ERR(cqr)) {
-		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
-			      "Could not allocate RCD request");
-		return cqr;
-	}
+	/*
+	 * buffer has to start with EBCDIC "V1.0" to show
+	 * support for virtual device SNEQ
+	 */
+	rcd_buffer[0] = 0xE5;
+	rcd_buffer[1] = 0xF1;
+	rcd_buffer[2] = 0x4B;
+	rcd_buffer[3] = 0xF0;
 
 	ccw = cqr->cpaddr;
-	ccw->cmd_code = ciw->cmd;
+	ccw->cmd_code = DASD_ECKD_CCW_RCD;
+	ccw->flags = 0;
 	ccw->cda = (__u32)(addr_t)rcd_buffer;
-	ccw->count = ciw->count;
+	ccw->count = DASD_ECKD_RCD_DATA_SIZE;
+	cqr->magic = DASD_ECKD_MAGIC;
 
 	cqr->startdev = device;
 	cqr->memdev = device;
@@ -784,7 +841,30 @@ static struct dasd_ccw_req *dasd_eckd_build_rcd_lpm(struct dasd_device *device,
 	cqr->retries = 256;
 	cqr->buildclk = get_clock();
 	cqr->status = DASD_CQR_FILLED;
-	return cqr;
+	set_bit(DASD_CQR_VERIFY_PATH, &cqr->flags);
+}
+
+static int dasd_eckd_read_conf_immediately(struct dasd_device *device,
+					   struct dasd_ccw_req *cqr,
+					   __u8 *rcd_buffer,
+					   __u8 lpm)
+{
+	struct ciw *ciw;
+	int rc;
+	/*
+	 * sanity check: scan for RCD command in extended SenseID data
+	 * some devices do not support RCD
+	 */
+	ciw = ccw_device_get_ciw(device->cdev, CIW_TYPE_RCD);
+	if (!ciw || ciw->cmd != DASD_ECKD_CCW_RCD)
+		return -EOPNOTSUPP;
+
+	dasd_eckd_fill_rcd_cqr(device, cqr, rcd_buffer, lpm);
+	clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
+	set_bit(DASD_CQR_ALLOW_SLOCK, &cqr->flags);
+	cqr->retries = 5;
+	rc = dasd_sleep_on_immediatly(cqr);
+	return rc;
 }
 
 static int dasd_eckd_read_conf_lpm(struct dasd_device *device,
@@ -797,32 +877,29 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device,
 	struct dasd_ccw_req *cqr;
 
 	/*
-	 * scan for RCD command in extended SenseID data
+	 * sanity check: scan for RCD command in extended SenseID data
+	 * some devices do not support RCD
 	 */
 	ciw = ccw_device_get_ciw(device->cdev, CIW_TYPE_RCD);
-	if (!ciw || ciw->cmd == 0) {
+	if (!ciw || ciw->cmd != DASD_ECKD_CCW_RCD) {
 		ret = -EOPNOTSUPP;
 		goto out_error;
 	}
-	rcd_buf = kzalloc(ciw->count, GFP_KERNEL | GFP_DMA);
+	rcd_buf = kzalloc(DASD_ECKD_RCD_DATA_SIZE, GFP_KERNEL | GFP_DMA);
 	if (!rcd_buf) {
 		ret = -ENOMEM;
 		goto out_error;
 	}
-
-	/*
-	 * buffer has to start with EBCDIC "V1.0" to show
-	 * support for virtual device SNEQ
-	 */
-	rcd_buf[0] = 0xE5;
-	rcd_buf[1] = 0xF1;
-	rcd_buf[2] = 0x4B;
-	rcd_buf[3] = 0xF0;
-	cqr = dasd_eckd_build_rcd_lpm(device, rcd_buf, ciw, lpm);
+	cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, 1 /* RCD */,
+				   0, /* use rcd_buf as data ara */
+				   device);
 	if (IS_ERR(cqr)) {
-		ret =  PTR_ERR(cqr);
+		DBF_DEV_EVENT(DBF_WARNING, device, "%s",
+			      "Could not allocate RCD request");
+		ret = -ENOMEM;
 		goto out_error;
 	}
+	dasd_eckd_fill_rcd_cqr(device, cqr, rcd_buf, lpm);
 	ret = dasd_sleep_on(cqr);
 	/*
 	 * on success we update the user input parms
@@ -831,7 +908,7 @@ static int dasd_eckd_read_conf_lpm(struct dasd_device *device,
 	if (ret)
 		goto out_error;
 
-	*rcd_buffer_size = ciw->count;
+	*rcd_buffer_size = DASD_ECKD_RCD_DATA_SIZE;
 	*rcd_buffer = rcd_buf;
 	return 0;
 out_error:
@@ -901,18 +978,18 @@ static int dasd_eckd_read_conf(struct dasd_device *device)
 	void *conf_data;
 	int conf_len, conf_data_saved;
 	int rc;
-	__u8 lpm;
+	__u8 lpm, opm;
 	struct dasd_eckd_private *private;
-	struct dasd_eckd_path *path_data;
+	struct dasd_path *path_data;
 
 	private = (struct dasd_eckd_private *) device->private;
-	path_data = (struct dasd_eckd_path *) &private->path_data;
-	path_data->opm = ccw_device_get_path_mask(device->cdev);
+	path_data = &device->path_data;
+	opm = ccw_device_get_path_mask(device->cdev);
 	lpm = 0x80;
 	conf_data_saved = 0;
 	/* get configuration data per operational path */
 	for (lpm = 0x80; lpm; lpm>>= 1) {
-		if (lpm & path_data->opm){
+		if (lpm & opm) {
 			rc = dasd_eckd_read_conf_lpm(device, &conf_data,
 						     &conf_len, lpm);
 			if (rc && rc != -EOPNOTSUPP) {	/* -EOPNOTSUPP is ok */
@@ -925,6 +1002,8 @@ static int dasd_eckd_read_conf(struct dasd_device *device)
 				DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s",
 						"No configuration data "
 						"retrieved");
+				/* no further analysis possible */
+				path_data->opm |= lpm;
 				continue;	/* no error */
 			}
 			/* save first valid configuration data */
@@ -948,6 +1027,7 @@ static int dasd_eckd_read_conf(struct dasd_device *device)
 				path_data->ppm |= lpm;
 				break;
 			}
+			path_data->opm |= lpm;
 			if (conf_data != private->conf_data)
 				kfree(conf_data);
 		}
@@ -955,6 +1035,140 @@ static int dasd_eckd_read_conf(struct dasd_device *device)
 	return 0;
 }
 
+static int verify_fcx_max_data(struct dasd_device *device, __u8 lpm)
+{
+	struct dasd_eckd_private *private;
+	int mdc;
+	u32 fcx_max_data;
+
+	private = (struct dasd_eckd_private *) device->private;
+	if (private->fcx_max_data) {
+		mdc = ccw_device_get_mdc(device->cdev, lpm);
+		if ((mdc < 0)) {
+			dev_warn(&device->cdev->dev,
+				 "Detecting the maximum data size for zHPF "
+				 "requests failed (rc=%d) for a new path %x\n",
+				 mdc, lpm);
+			return mdc;
+		}
+		fcx_max_data = mdc * FCX_MAX_DATA_FACTOR;
+		if (fcx_max_data < private->fcx_max_data) {
+			dev_warn(&device->cdev->dev,
+				 "The maximum data size for zHPF requests %u "
+				 "on a new path %x is below the active maximum "
+				 "%u\n", fcx_max_data, lpm,
+				 private->fcx_max_data);
+			return -EACCES;
+		}
+	}
+	return 0;
+}
+
+static void do_path_verification_work(struct work_struct *work)
+{
+	struct path_verification_work_data *data;
+	struct dasd_device *device;
+	__u8 lpm, opm, npm, ppm, epm;
+	unsigned long flags;
+	int rc;
+
+	data = container_of(work, struct path_verification_work_data, worker);
+	device = data->device;
+
+	opm = 0;
+	npm = 0;
+	ppm = 0;
+	epm = 0;
+	for (lpm = 0x80; lpm; lpm >>= 1) {
+		if (lpm & data->tbvpm) {
+			memset(data->rcd_buffer, 0, sizeof(data->rcd_buffer));
+			memset(&data->cqr, 0, sizeof(data->cqr));
+			data->cqr.cpaddr = &data->ccw;
+			rc = dasd_eckd_read_conf_immediately(device, &data->cqr,
+							     data->rcd_buffer,
+							     lpm);
+			if (!rc) {
+				switch (dasd_eckd_path_access(data->rcd_buffer,
+						     DASD_ECKD_RCD_DATA_SIZE)) {
+				case 0x02:
+					npm |= lpm;
+					break;
+				case 0x03:
+					ppm |= lpm;
+					break;
+				}
+				opm |= lpm;
+			} else if (rc == -EOPNOTSUPP) {
+				DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s",
+				       "path verification: No configuration "
+				       "data retrieved");
+				opm |= lpm;
+			} else if (rc == -EAGAIN) {
+				DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "%s",
+					"path verification: device is stopped,"
+					" try again later");
+				epm |= lpm;
+			} else {
+				dev_warn(&device->cdev->dev,
+					 "Reading device feature codes failed "
+					 "(rc=%d) for new path %x\n", rc, lpm);
+				continue;
+			}
+			if (verify_fcx_max_data(device, lpm)) {
+				opm &= ~lpm;
+				npm &= ~lpm;
+				ppm &= ~lpm;
+			}
+		}
+	}
+	/*
+	 * There is a small chance that a path is lost again between
+	 * above path verification and the following modification of
+	 * the device opm mask. We could avoid that race here by using
+	 * yet another path mask, but we rather deal with this unlikely
+	 * situation in dasd_start_IO.
+	 */
+	spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
+	if (!device->path_data.opm && opm) {
+		device->path_data.opm = opm;
+		dasd_generic_path_operational(device);
+	} else
+		device->path_data.opm |= opm;
+	device->path_data.npm |= npm;
+	device->path_data.ppm |= ppm;
+	device->path_data.tbvpm |= epm;
+	spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
+
+	dasd_put_device(device);
+	if (data->isglobal)
+		mutex_unlock(&dasd_path_verification_mutex);
+	else
+		kfree(data);
+}
+
+static int dasd_eckd_verify_path(struct dasd_device *device, __u8 lpm)
+{
+	struct path_verification_work_data *data;
+
+	data = kmalloc(sizeof(*data), GFP_ATOMIC | GFP_DMA);
+	if (!data) {
+		if (mutex_trylock(&dasd_path_verification_mutex)) {
+			data = path_verification_worker;
+			data->isglobal = 1;
+		} else
+			return -ENOMEM;
+	} else {
+		memset(data, 0, sizeof(*data));
+		data->isglobal = 0;
+	}
+	INIT_WORK(&data->worker, do_path_verification_work);
+	dasd_get_device(device);
+	data->device = device;
+	data->tbvpm = lpm;
+	schedule_work(&data->worker);
+	return 0;
+}
+
 static int dasd_eckd_read_features(struct dasd_device *device)
 {
 	struct dasd_psf_prssd_data *prssdp;
@@ -1105,6 +1319,37 @@ static void dasd_eckd_validate_server(struct dasd_device *device)
 			"returned rc=%d", private->uid.ssid, rc);
 }
 
+static u32 get_fcx_max_data(struct dasd_device *device)
+{
+#if defined(CONFIG_64BIT)
+	int tpm, mdc;
+	int fcx_in_css, fcx_in_gneq, fcx_in_features;
+	struct dasd_eckd_private *private;
+
+	if (dasd_nofcx)
+		return 0;
+	/* is transport mode supported? */
+	private = (struct dasd_eckd_private *) device->private;
+	fcx_in_css = css_general_characteristics.fcx;
+	fcx_in_gneq = private->gneq->reserved2[7] & 0x04;
+	fcx_in_features = private->features.feature[40] & 0x80;
+	tpm = fcx_in_css && fcx_in_gneq && fcx_in_features;
+
+	if (!tpm)
+		return 0;
+
+	mdc = ccw_device_get_mdc(device->cdev, 0);
+	if (mdc < 0) {
+		dev_warn(&device->cdev->dev, "Detecting the maximum supported"
+			 " data size for zHPF requests failed\n");
+		return 0;
+	} else
+		return mdc * FCX_MAX_DATA_FACTOR;
+#else
+	return 0;
+#endif
+}
+
 /*
  * Check device characteristics.
  * If the device is accessible using ECKD discipline, the device is enabled.
@@ -1223,6 +1468,8 @@ dasd_eckd_check_characteristics(struct dasd_device *device)
 	else
 		private->real_cyl = private->rdc_data.no_cyl;
 
+	private->fcx_max_data = get_fcx_max_data(device);
+
 	readonly = dasd_device_is_ro(device);
 	if (readonly)
 		set_bit(DASD_FLAG_DEVICE_RO, &device->flags);
@@ -1404,6 +1651,13 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
 		dasd_sfree_request(init_cqr, device);
 	}
 
+	if (device->features & DASD_FEATURE_USERAW) {
+		block->bp_block = DASD_RAW_BLOCKSIZE;
+		blk_per_trk = DASD_RAW_BLOCK_PER_TRACK;
+		block->s2b_shift = 3;
+		goto raw;
+	}
+
 	if (status == INIT_CQR_UNFORMATTED) {
 		dev_warn(&device->cdev->dev, "The DASD is not formatted\n");
 		return -EMEDIUMTYPE;
@@ -1441,6 +1695,7 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
 			dev_warn(&device->cdev->dev,
 				 "Track 0 has no records following the VTOC\n");
 	}
+
 	if (count_area != NULL && count_area->kl == 0) {
 		/* we found notthing violating our disk layout */
 		if (dasd_check_blocksize(count_area->dl) == 0)
@@ -1456,6 +1711,8 @@ static int dasd_eckd_end_analysis(struct dasd_block *block)
 		block->s2b_shift++;
 
 	blk_per_trk = recs_per_track(&private->rdc_data, 0, block->bp_block);
+
+raw:
 	block->blocks = (private->real_cyl *
 			  private->rdc_data.trk_per_cyl *
 			  blk_per_trk);
@@ -1716,6 +1973,7 @@ static void dasd_eckd_handle_terminated_request(struct dasd_ccw_req *cqr)
 	if (cqr->block && (cqr->startdev != cqr->block->base)) {
 		dasd_eckd_reset_ccw_to_base_io(cqr);
 		cqr->startdev = cqr->block->base;
+		cqr->lpm = cqr->block->base->path_data.opm;
 	}
 };
 
@@ -1744,9 +2002,9 @@ dasd_eckd_erp_postaction(struct dasd_ccw_req * cqr)
 	return dasd_default_erp_postaction;
 }
 
-
-static void dasd_eckd_handle_unsolicited_interrupt(struct dasd_device *device,
-						   struct irb *irb)
+static void dasd_eckd_check_for_device_change(struct dasd_device *device,
+					      struct dasd_ccw_req *cqr,
+					      struct irb *irb)
 {
 	char mask;
 	char *sense = NULL;
@@ -1770,40 +2028,41 @@ static void dasd_eckd_handle_unsolicited_interrupt(struct dasd_device *device,
 			/* schedule worker to reload device */
 			dasd_reload_device(device);
 		}
-
 		dasd_generic_handle_state_change(device);
 		return;
 	}
 
-	/* summary unit check */
 	sense = dasd_get_sense(irb);
-	if (sense && (sense[7] == 0x0D) &&
+	if (!sense)
+		return;
+
+	/* summary unit check */
+	if ((sense[7] == 0x0D) &&
 	    (scsw_dstat(&irb->scsw) & DEV_STAT_UNIT_CHECK)) {
 		dasd_alias_handle_summary_unit_check(device, irb);
 		return;
 	}
 
 	/* service information message SIM */
-	if (sense && !(sense[27] & DASD_SENSE_BIT_0) &&
+	if (!cqr && !(sense[27] & DASD_SENSE_BIT_0) &&
 	    ((sense[6] & DASD_SIM_SENSE) == DASD_SIM_SENSE)) {
 		dasd_3990_erp_handle_sim(device, sense);
-		dasd_schedule_device_bh(device);
 		return;
 	}
 
-	if ((scsw_cc(&irb->scsw) == 1) && !sense &&
-	    (scsw_fctl(&irb->scsw) == SCSW_FCTL_START_FUNC) &&
-	    (scsw_actl(&irb->scsw) == SCSW_ACTL_START_PEND) &&
-	    (scsw_stctl(&irb->scsw) == SCSW_STCTL_STATUS_PEND)) {
-		/* fake irb do nothing, they are handled elsewhere */
-		dasd_schedule_device_bh(device);
-		return;
+	/* loss of device reservation is handled via base devices only
+	 * as alias devices may be used with several bases
+	 */
+	if (device->block && (sense[7] == 0x3F) &&
+	    (scsw_dstat(&irb->scsw) & DEV_STAT_UNIT_CHECK) &&
+	    test_bit(DASD_FLAG_IS_RESERVED, &device->flags)) {
+		if (device->features & DASD_FEATURE_FAILONSLCK)
+			set_bit(DASD_FLAG_LOCK_STOLEN, &device->flags);
+		clear_bit(DASD_FLAG_IS_RESERVED, &device->flags);
+		dev_err(&device->cdev->dev,
+			"The device reservation was lost\n");
 	}
-
-	dasd_schedule_device_bh(device);
-	return;
-};
-
+}
 
 static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_single(
 					       struct dasd_device *startdev,
@@ -1984,7 +2243,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_single(
 	cqr->memdev = startdev;
 	cqr->block = block;
 	cqr->expires = startdev->default_expires * HZ;	/* default 5 minutes */
-	cqr->lpm = private->path_data.ppm;
+	cqr->lpm = startdev->path_data.ppm;
 	cqr->retries = 256;
 	cqr->buildclk = get_clock();
 	cqr->status = DASD_CQR_FILLED;
@@ -2161,7 +2420,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_cmd_track(
 	cqr->memdev = startdev;
 	cqr->block = block;
 	cqr->expires = startdev->default_expires * HZ;	/* default 5 minutes */
-	cqr->lpm = private->path_data.ppm;
+	cqr->lpm = startdev->path_data.ppm;
 	cqr->retries = 256;
 	cqr->buildclk = get_clock();
 	cqr->status = DASD_CQR_FILLED;
@@ -2326,6 +2585,12 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track(
 	struct tidaw *last_tidaw = NULL;
 	int itcw_op;
 	size_t itcw_size;
+	u8 tidaw_flags;
+	unsigned int seg_len, part_len, len_to_track_end;
+	unsigned char new_track;
+	sector_t recid, trkid;
+	unsigned int offs;
+	unsigned int count, count_to_trk_end;
 
 	basedev = block->base;
 	private = (struct dasd_eckd_private *) basedev->private;
@@ -2341,12 +2606,16 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track(
 	/* trackbased I/O needs address all memory via TIDAWs,
 	 * not just for 64 bit addresses. This allows us to map
 	 * each segment directly to one tidaw.
+	 * In the case of write requests, additional tidaws may
+	 * be needed when a segment crosses a track boundary.
 	 */
 	trkcount = last_trk - first_trk + 1;
 	ctidaw = 0;
 	rq_for_each_segment(bv, req, iter) {
 		++ctidaw;
 	}
+	if (rq_data_dir(req) == WRITE)
+		ctidaw += (last_trk - first_trk);
 
 	/* Allocate the ccw request. */
 	itcw_size = itcw_calc_size(0, ctidaw, 0);
@@ -2354,15 +2623,6 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track(
 	if (IS_ERR(cqr))
 		return cqr;
 
-	cqr->cpmode = 1;
-	cqr->startdev = startdev;
-	cqr->memdev = startdev;
-	cqr->block = block;
-	cqr->expires = 100*HZ;
-	cqr->buildclk = get_clock();
-	cqr->status = DASD_CQR_FILLED;
-	cqr->retries = 10;
-
 	/* transfer length factor: how many bytes to read from the last track */
 	if (first_trk == last_trk)
 		tlf = last_offs - first_offs + 1;
@@ -2371,8 +2631,11 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track(
 	tlf *= blksize;
 
 	itcw = itcw_init(cqr->data, itcw_size, itcw_op, 0, ctidaw, 0);
+	if (IS_ERR(itcw)) {
+		dasd_sfree_request(cqr, startdev);
+		return ERR_PTR(-EINVAL);
+	}
 	cqr->cpaddr = itcw_get_tcw(itcw);
-
 	if (prepare_itcw(itcw, first_trk, last_trk,
 			 cmd, basedev, startdev,
 			 first_offs + 1,
@@ -2385,31 +2648,69 @@ static struct dasd_ccw_req *dasd_eckd_build_cp_tpm_track(
 		dasd_sfree_request(cqr, startdev);
 		return ERR_PTR(-EAGAIN);
 	}
-
 	/*
 	 * A tidaw can address 4k of memory, but must not cross page boundaries
 	 * We can let the block layer handle this by setting
 	 * blk_queue_segment_boundary to page boundaries and
 	 * blk_max_segment_size to page size when setting up the request queue.
+	 * For write requests, a TIDAW must not cross track boundaries, because
+	 * we have to set the CBC flag on the last tidaw for each track.
 	 */
-	rq_for_each_segment(bv, req, iter) {
-		dst = page_address(bv->bv_page) + bv->bv_offset;
-		last_tidaw = itcw_add_tidaw(itcw, 0x00, dst, bv->bv_len);
-		if (IS_ERR(last_tidaw))
-			return (struct dasd_ccw_req *)last_tidaw;
+	if (rq_data_dir(req) == WRITE) {
+		new_track = 1;
+		recid = first_rec;
+		rq_for_each_segment(bv, req, iter) {
+			dst = page_address(bv->bv_page) + bv->bv_offset;
+			seg_len = bv->bv_len;
+			while (seg_len) {
+				if (new_track) {
+					trkid = recid;
+					offs = sector_div(trkid, blk_per_trk);
+					count_to_trk_end = blk_per_trk - offs;
+					count = min((last_rec - recid + 1),
+						    (sector_t)count_to_trk_end);
+					len_to_track_end = count * blksize;
+					recid += count;
+					new_track = 0;
+				}
+				part_len = min(seg_len, len_to_track_end);
+				seg_len -= part_len;
+				len_to_track_end -= part_len;
+				/* We need to end the tidaw at track end */
+				if (!len_to_track_end) {
+					new_track = 1;
+					tidaw_flags = TIDAW_FLAGS_INSERT_CBC;
+				} else
+					tidaw_flags = 0;
+				last_tidaw = itcw_add_tidaw(itcw, tidaw_flags,
+							    dst, part_len);
+				if (IS_ERR(last_tidaw))
+					return ERR_PTR(-EINVAL);
+				dst += part_len;
+			}
+		}
+	} else {
+		rq_for_each_segment(bv, req, iter) {
+			dst = page_address(bv->bv_page) + bv->bv_offset;
+			last_tidaw = itcw_add_tidaw(itcw, 0x00,
+						    dst, bv->bv_len);
+			if (IS_ERR(last_tidaw))
+				return ERR_PTR(-EINVAL);
+		}
 	}
-
-	last_tidaw->flags |= 0x80;
+	last_tidaw->flags |= TIDAW_FLAGS_LAST;
+	last_tidaw->flags &= ~TIDAW_FLAGS_INSERT_CBC;
 	itcw_finalize(itcw);
 
 	if (blk_noretry_request(req) ||
 	    block->base->features & DASD_FEATURE_FAILFAST)
 		set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
+	cqr->cpmode = 1;
 	cqr->startdev = startdev;
 	cqr->memdev = startdev;
 	cqr->block = block;
 	cqr->expires = startdev->default_expires * HZ;	/* default 5 minutes */
-	cqr->lpm = private->path_data.ppm;
+	cqr->lpm = startdev->path_data.ppm;
 	cqr->retries = 256;
 	cqr->buildclk = get_clock();
 	cqr->status = DASD_CQR_FILLED;
@@ -2420,11 +2721,9 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 					       struct dasd_block *block,
 					       struct request *req)
 {
-	int tpm, cmdrtd, cmdwtd;
+	int cmdrtd, cmdwtd;
 	int use_prefix;
-#if defined(CONFIG_64BIT)
-	int fcx_in_css, fcx_in_gneq, fcx_in_features;
-#endif
+	int fcx_multitrack;
 	struct dasd_eckd_private *private;
 	struct dasd_device *basedev;
 	sector_t first_rec, last_rec;
@@ -2432,6 +2731,7 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 	unsigned int first_offs, last_offs;
 	unsigned int blk_per_trk, blksize;
 	int cdlspecial;
+	unsigned int data_size;
 	struct dasd_ccw_req *cqr;
 
 	basedev = block->base;
@@ -2450,15 +2750,11 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 	last_offs = sector_div(last_trk, blk_per_trk);
 	cdlspecial = (private->uses_cdl && first_rec < 2*blk_per_trk);
 
-	/* is transport mode supported? */
-#if defined(CONFIG_64BIT)
-	fcx_in_css = css_general_characteristics.fcx;
-	fcx_in_gneq = private->gneq->reserved2[7] & 0x04;
-	fcx_in_features = private->features.feature[40] & 0x80;
-	tpm = fcx_in_css && fcx_in_gneq && fcx_in_features;
-#else
-	tpm = 0;
-#endif
+	fcx_multitrack = private->features.feature[40] & 0x20;
+	data_size = blk_rq_bytes(req);
+	/* tpm write request add CBC data on each track boundary */
+	if (rq_data_dir(req) == WRITE)
+		data_size += (last_trk - first_trk) * 4;
 
 	/* is read track data and write track data in command mode supported? */
 	cmdrtd = private->features.feature[9] & 0x20;
@@ -2468,13 +2764,15 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 	cqr = NULL;
 	if (cdlspecial || dasd_page_cache) {
 		/* do nothing, just fall through to the cmd mode single case */
-	} else if (!dasd_nofcx && tpm && (first_trk == last_trk)) {
+	} else if ((data_size <= private->fcx_max_data)
+		   && (fcx_multitrack || (first_trk == last_trk))) {
 		cqr = dasd_eckd_build_cp_tpm_track(startdev, block, req,
 						    first_rec, last_rec,
 						    first_trk, last_trk,
 						    first_offs, last_offs,
 						    blk_per_trk, blksize);
-		if (IS_ERR(cqr) && PTR_ERR(cqr) != -EAGAIN)
+		if (IS_ERR(cqr) && (PTR_ERR(cqr) != -EAGAIN) &&
+		    (PTR_ERR(cqr) != -ENOMEM))
 			cqr = NULL;
 	} else if (use_prefix &&
 		   (((rq_data_dir(req) == READ) && cmdrtd) ||
@@ -2484,7 +2782,8 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 						   first_trk, last_trk,
 						   first_offs, last_offs,
 						   blk_per_trk, blksize);
-		if (IS_ERR(cqr) && PTR_ERR(cqr) != -EAGAIN)
+		if (IS_ERR(cqr) && (PTR_ERR(cqr) != -EAGAIN) &&
+		    (PTR_ERR(cqr) != -ENOMEM))
 			cqr = NULL;
 	}
 	if (!cqr)
@@ -2496,6 +2795,135 @@ static struct dasd_ccw_req *dasd_eckd_build_cp(struct dasd_device *startdev,
 	return cqr;
 }
 
+static struct dasd_ccw_req *dasd_raw_build_cp(struct dasd_device *startdev,
+					       struct dasd_block *block,
+					       struct request *req)
+{
+	struct dasd_eckd_private *private;
+	unsigned long *idaws;
+	struct dasd_device *basedev;
+	struct dasd_ccw_req *cqr;
+	struct ccw1 *ccw;
+	struct req_iterator iter;
+	struct bio_vec *bv;
+	char *dst;
+	unsigned char cmd;
+	unsigned int trkcount;
+	unsigned int seg_len, len_to_track_end;
+	unsigned int first_offs;
+	unsigned int cidaw, cplength, datasize;
+	sector_t first_trk, last_trk;
+	unsigned int pfx_datasize;
+
+	/*
+	 * raw track access needs to be mutiple of 64k and on 64k boundary
+	 */
+	if ((blk_rq_pos(req) % DASD_RAW_SECTORS_PER_TRACK) != 0) {
+		cqr = ERR_PTR(-EINVAL);
+		goto out;
+	}
+	if (((blk_rq_pos(req) + blk_rq_sectors(req)) %
+	     DASD_RAW_SECTORS_PER_TRACK) != 0) {
+		cqr = ERR_PTR(-EINVAL);
+		goto out;
+	}
+
+	first_trk = blk_rq_pos(req) / DASD_RAW_SECTORS_PER_TRACK;
+	last_trk = (blk_rq_pos(req) + blk_rq_sectors(req) - 1) /
+		DASD_RAW_SECTORS_PER_TRACK;
+	trkcount = last_trk - first_trk + 1;
+	first_offs = 0;
+	basedev = block->base;
+	private = (struct dasd_eckd_private *) basedev->private;
+
+	if (rq_data_dir(req) == READ)
+		cmd = DASD_ECKD_CCW_READ_TRACK;
+	else if (rq_data_dir(req) == WRITE)
+		cmd = DASD_ECKD_CCW_WRITE_FULL_TRACK;
+	else {
+		cqr = ERR_PTR(-EINVAL);
+		goto out;
+	}
+
+	/*
+	 * Raw track based I/O needs IDAWs for each page,
+	 * and not just for 64 bit addresses.
+	 */
+	cidaw = trkcount * DASD_RAW_BLOCK_PER_TRACK;
+
+	/* 1x prefix + one read/write ccw per track */
+	cplength = 1 + trkcount;
+
+	/*
+	 * struct PFX_eckd_data has up to 2 byte as extended parameter
+	 * this is needed for write full track and has to be mentioned
+	 * seperately
+	 * add 8 instead of 2 to keep 8 byte boundary
+	 */
+	pfx_datasize = sizeof(struct PFX_eckd_data) + 8;
+
+	datasize = pfx_datasize + cidaw * sizeof(unsigned long long);
+
+	/* Allocate the ccw request. */
+	cqr = dasd_smalloc_request(DASD_ECKD_MAGIC, cplength,
+				   datasize, startdev);
+	if (IS_ERR(cqr))
+		goto out;
+	ccw = cqr->cpaddr;
+
+	if (prefix_LRE(ccw++, cqr->data, first_trk, last_trk, cmd,
+		       basedev, startdev, 1 /* format */, first_offs + 1,
+		       trkcount, 0, 0) == -EAGAIN) {
+		/* Clock not in sync and XRC is enabled.
+		 * Try again later.
+		 */
+		dasd_sfree_request(cqr, startdev);
+		cqr = ERR_PTR(-EAGAIN);
+		goto out;
+	}
+
+	idaws = (unsigned long *)(cqr->data + pfx_datasize);
+
+	len_to_track_end = 0;
+
+	rq_for_each_segment(bv, req, iter) {
+		dst = page_address(bv->bv_page) + bv->bv_offset;
+		seg_len = bv->bv_len;
+		if (!len_to_track_end) {
+			ccw[-1].flags |= CCW_FLAG_CC;
+			ccw->cmd_code = cmd;
+			/* maximum 3390 track size */
+			ccw->count = 57326;
+			/* 64k map to one track */
+			len_to_track_end = 65536;
+			ccw->cda = (__u32)(addr_t)idaws;
+			ccw->flags |= CCW_FLAG_IDA;
+			ccw->flags |= CCW_FLAG_SLI;
+			ccw++;
+		}
+		len_to_track_end -= seg_len;
+		idaws = idal_create_words(idaws, dst, seg_len);
+	}
+
+	if (blk_noretry_request(req) ||
+	    block->base->features & DASD_FEATURE_FAILFAST)
+		set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
+	cqr->startdev = startdev;
+	cqr->memdev = startdev;
+	cqr->block = block;
+	cqr->expires = startdev->default_expires * HZ;
+	cqr->lpm = startdev->path_data.ppm;
+	cqr->retries = 256;
+	cqr->buildclk = get_clock();
+	cqr->status = DASD_CQR_FILLED;
+
+	if (IS_ERR(cqr) && PTR_ERR(cqr) != -EAGAIN)
+		cqr = NULL;
+out:
+	return cqr;
+}
+
+
 static int
 dasd_eckd_free_cp(struct dasd_ccw_req *cqr, struct request *req)
 {
@@ -2600,7 +3028,10 @@ static struct dasd_ccw_req *dasd_eckd_build_alias_cp(struct dasd_device *base,
 
 	spin_lock_irqsave(get_ccwdev_lock(startdev->cdev), flags);
 	private->count++;
-	cqr = dasd_eckd_build_cp(startdev, block, req);
+	if ((base->features & DASD_FEATURE_USERAW))
+		cqr = dasd_raw_build_cp(startdev, block, req);
+	else
+		cqr = dasd_eckd_build_cp(startdev, block, req);
 	if (IS_ERR(cqr))
 		private->count--;
 	spin_unlock_irqrestore(get_ccwdev_lock(startdev->cdev), flags);
@@ -2688,6 +3119,8 @@ dasd_eckd_release(struct dasd_device *device)
 	cqr->status = DASD_CQR_FILLED;
 
 	rc = dasd_sleep_on_immediatly(cqr);
+	if (!rc)
+		clear_bit(DASD_FLAG_IS_RESERVED, &device->flags);
 
 	if (useglobal)
 		mutex_unlock(&dasd_reserve_mutex);
@@ -2741,6 +3174,8 @@ dasd_eckd_reserve(struct dasd_device *device)
 	cqr->status = DASD_CQR_FILLED;
 
 	rc = dasd_sleep_on_immediatly(cqr);
+	if (!rc)
+		set_bit(DASD_FLAG_IS_RESERVED, &device->flags);
 
 	if (useglobal)
 		mutex_unlock(&dasd_reserve_mutex);
@@ -2793,6 +3228,8 @@ dasd_eckd_steal_lock(struct dasd_device *device)
 	cqr->status = DASD_CQR_FILLED;
 
 	rc = dasd_sleep_on_immediatly(cqr);
+	if (!rc)
+		set_bit(DASD_FLAG_IS_RESERVED, &device->flags);
 
 	if (useglobal)
 		mutex_unlock(&dasd_reserve_mutex);
@@ -2845,6 +3282,7 @@ static int dasd_eckd_snid(struct dasd_device *device,
 	cqr->memdev = device;
 	clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
 	set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
+	set_bit(DASD_CQR_ALLOW_SLOCK, &cqr->flags);
 	cqr->retries = 5;
 	cqr->expires = 10 * HZ;
 	cqr->buildclk = get_clock();
@@ -3279,10 +3717,8 @@ static void dasd_eckd_dump_sense_tcw(struct dasd_device *device,
 {
 	char *page;
 	int len, sl, sct, residual;
-
 	struct tsb *tsb;
-	u8 *sense;
-
+	u8 *sense, *rcq;
 
 	page = (char *) get_zeroed_page(GFP_ATOMIC);
 	if (page == NULL) {
@@ -3348,12 +3784,15 @@ static void dasd_eckd_dump_sense_tcw(struct dasd_device *device,
 		case 2: /* ts_ddpc */
 			len += sprintf(page + len, KERN_ERR PRINTK_HEADER
 			       " tsb->tsa.ddpc.rc %d\n", tsb->tsa.ddpc.rc);
-			len += sprintf(page + len, KERN_ERR PRINTK_HEADER
-			       " tsb->tsa.ddpc.rcq:  ");
-			for (sl = 0; sl < 16; sl++) {
+			for (sl = 0; sl < 2; sl++) {
+				len += sprintf(page + len,
+					       KERN_ERR PRINTK_HEADER
+					       " tsb->tsa.ddpc.rcq %2d-%2d: ",
+					       (8 * sl), ((8 * sl) + 7));
+				rcq = tsb->tsa.ddpc.rcq;
 				for (sct = 0; sct < 8; sct++) {
 					len += sprintf(page + len, " %02x",
-						       tsb->tsa.ddpc.rcq[sl]);
+						       rcq[8 * sl + sct]);
 				}
 				len += sprintf(page + len, "\n");
 			}
@@ -3550,6 +3989,7 @@ static struct ccw_driver dasd_eckd_driver = {
 	.set_offline = dasd_generic_set_offline,
 	.set_online  = dasd_eckd_set_online,
 	.notify      = dasd_generic_notify,
+	.path_event  = dasd_generic_path_event,
 	.freeze      = dasd_generic_pm_freeze,
 	.thaw	     = dasd_generic_restore_device,
 	.restore     = dasd_generic_restore_device,
@@ -3573,10 +4013,11 @@ static struct dasd_discipline dasd_eckd_discipline = {
 	.owner = THIS_MODULE,
 	.name = "ECKD",
 	.ebcname = "ECKD",
-	.max_blocks = 240,
+	.max_blocks = 190,
 	.check_device = dasd_eckd_check_characteristics,
 	.uncheck_device = dasd_eckd_uncheck_device,
 	.do_analysis = dasd_eckd_do_analysis,
+	.verify_path = dasd_eckd_verify_path,
 	.ready_to_online = dasd_eckd_ready_to_online,
 	.online_to_ready = dasd_eckd_online_to_ready,
 	.fill_geometry = dasd_eckd_fill_geometry,
@@ -3586,7 +4027,7 @@ static struct dasd_discipline dasd_eckd_discipline = {
 	.format_device = dasd_eckd_format_device,
 	.erp_action = dasd_eckd_erp_action,
 	.erp_postaction = dasd_eckd_erp_postaction,
-	.handle_unsolicited_interrupt = dasd_eckd_handle_unsolicited_interrupt,
+	.check_for_device_change = dasd_eckd_check_for_device_change,
 	.build_cp = dasd_eckd_build_alias_cp,
 	.free_cp = dasd_eckd_free_alias_cp,
 	.dump_sense = dasd_eckd_dump_sense,
@@ -3609,11 +4050,19 @@ dasd_eckd_init(void)
 				   GFP_KERNEL | GFP_DMA);
 	if (!dasd_reserve_req)
 		return -ENOMEM;
+	path_verification_worker = kmalloc(sizeof(*path_verification_worker),
+				   GFP_KERNEL | GFP_DMA);
+	if (!path_verification_worker) {
+		kfree(dasd_reserve_req);
+		return -ENOMEM;
+	}
 	ret = ccw_driver_register(&dasd_eckd_driver);
 	if (!ret)
 		wait_for_device_probe();
-	else
+	else {
+		kfree(path_verification_worker);
 		kfree(dasd_reserve_req);
+	}
 	return ret;
 }
 
@@ -3621,6 +4070,7 @@ static void __exit
 dasd_eckd_cleanup(void)
 {
 	ccw_driver_unregister(&dasd_eckd_driver);
+	kfree(path_verification_worker);
 	kfree(dasd_reserve_req);
 }
 
diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index 12097c24f2f..4a688a873a7 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -37,14 +37,17 @@
 #define DASD_ECKD_CCW_WRITE_KD_MT	 0x8d
 #define DASD_ECKD_CCW_READ_KD_MT	 0x8e
 #define DASD_ECKD_CCW_RELEASE		 0x94
+#define DASD_ECKD_CCW_WRITE_FULL_TRACK	 0x95
 #define DASD_ECKD_CCW_READ_CKD_MT	 0x9e
 #define DASD_ECKD_CCW_WRITE_CKD_MT	 0x9d
 #define DASD_ECKD_CCW_WRITE_TRACK_DATA	 0xA5
 #define DASD_ECKD_CCW_READ_TRACK_DATA	 0xA6
 #define DASD_ECKD_CCW_RESERVE		 0xB4
+#define DASD_ECKD_CCW_READ_TRACK	 0xDE
 #define DASD_ECKD_CCW_PFX		 0xE7
 #define DASD_ECKD_CCW_PFX_READ		 0xEA
 #define DASD_ECKD_CCW_RSCK		 0xF9
+#define DASD_ECKD_CCW_RCD		 0xFA
 
 /*
  * Perform Subsystem Function / Sub-Orders
@@ -57,6 +60,11 @@
  */
 #define LV_COMPAT_CYL 0xFFFE
 
+
+#define FCX_MAX_DATA_FACTOR 65536
+#define DASD_ECKD_RCD_DATA_SIZE 256
+
+
 /*****************************************************************************
  * SECTION: Type Definitions
  ****************************************************************************/
@@ -331,12 +339,6 @@ struct dasd_gneq {
 	__u8 reserved2[22];
 } __attribute__ ((packed));
 
-struct dasd_eckd_path {
-	__u8 opm;
-	__u8 ppm;
-	__u8 npm;
-};
-
 struct dasd_rssd_features {
 	char feature[256];
 } __attribute__((packed));
@@ -442,7 +444,6 @@ struct dasd_eckd_private {
 	struct vd_sneq *vdsneq;
 	struct dasd_gneq *gneq;
 
-	struct dasd_eckd_path path_data;
 	struct eckd_count count_area[5];
 	int init_cqr_status;
 	int uses_cdl;
@@ -455,6 +456,8 @@ struct dasd_eckd_private {
 	struct alias_pav_group *pavgroup;
 	struct alias_lcu *lcu;
 	int count;
+
+	u32 fcx_max_data;
 };
 
 
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index c71d89dba30..77f778b7b07 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -17,7 +17,6 @@
 #include <linux/device.h>
 #include <linux/poll.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 
@@ -474,6 +473,7 @@ int dasd_eer_enable(struct dasd_device *device)
 	cqr->retries = 255;
 	cqr->expires = 10 * HZ;
 	clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
+	set_bit(DASD_CQR_ALLOW_SLOCK, &cqr->flags);
 
 	ccw = cqr->cpaddr;
 	ccw->cmd_code = DASD_ECKD_CCW_SNSS;
diff --git a/drivers/s390/block/dasd_erp.c b/drivers/s390/block/dasd_erp.c
index 7656384a811..0eafe2e421e 100644
--- a/drivers/s390/block/dasd_erp.c
+++ b/drivers/s390/block/dasd_erp.c
@@ -96,7 +96,8 @@ dasd_default_erp_action(struct dasd_ccw_req *cqr)
 		DBF_DEV_EVENT(DBF_DEBUG, device,
                              "default ERP called (%i retries left)",
                              cqr->retries);
-		cqr->lpm    = LPM_ANYPATH;
+		if (!test_bit(DASD_CQR_VERIFY_PATH, &cqr->flags))
+			cqr->lpm = device->path_data.opm;
 		cqr->status = DASD_CQR_FILLED;
         } else {
 		pr_err("%s: default ERP has run out of retries and failed\n",
diff --git a/drivers/s390/block/dasd_fba.c b/drivers/s390/block/dasd_fba.c
index bec5486e0e6..be89b3a893d 100644
--- a/drivers/s390/block/dasd_fba.c
+++ b/drivers/s390/block/dasd_fba.c
@@ -73,6 +73,7 @@ static struct ccw_driver dasd_fba_driver = {
 	.set_offline = dasd_generic_set_offline,
 	.set_online  = dasd_fba_set_online,
 	.notify      = dasd_generic_notify,
+	.path_event  = dasd_generic_path_event,
 	.freeze      = dasd_generic_pm_freeze,
 	.thaw	     = dasd_generic_restore_device,
 	.restore     = dasd_generic_restore_device,
@@ -164,6 +165,7 @@ dasd_fba_check_characteristics(struct dasd_device *device)
 	}
 
 	device->default_expires = DASD_EXPIRES;
+	device->path_data.opm = LPM_ANYPATH;
 
 	readonly = dasd_device_is_ro(device);
 	if (readonly)
@@ -231,24 +233,16 @@ dasd_fba_erp_postaction(struct dasd_ccw_req * cqr)
 	return NULL;
 }
 
-static void dasd_fba_handle_unsolicited_interrupt(struct dasd_device *device,
-						   struct irb *irb)
+static void dasd_fba_check_for_device_change(struct dasd_device *device,
+					     struct dasd_ccw_req *cqr,
+					     struct irb *irb)
 {
 	char mask;
 
 	/* first of all check for state change pending interrupt */
 	mask = DEV_STAT_ATTENTION | DEV_STAT_DEV_END | DEV_STAT_UNIT_EXCEP;
-	if ((irb->scsw.cmd.dstat & mask) == mask) {
+	if ((irb->scsw.cmd.dstat & mask) == mask)
 		dasd_generic_handle_state_change(device);
-		return;
-	}
-
-	/* check for unsolicited interrupts */
-	DBF_DEV_EVENT(DBF_WARNING, device, "%s",
-		    "unsolicited interrupt received");
-	device->discipline->dump_sense_dbf(device, irb, "unsolicited");
-	dasd_schedule_device_bh(device);
-	return;
 };
 
 static struct dasd_ccw_req *dasd_fba_build_cp(struct dasd_device * memdev,
@@ -596,13 +590,14 @@ static struct dasd_discipline dasd_fba_discipline = {
 	.max_blocks = 96,
 	.check_device = dasd_fba_check_characteristics,
 	.do_analysis = dasd_fba_do_analysis,
+	.verify_path = dasd_generic_verify_path,
 	.fill_geometry = dasd_fba_fill_geometry,
 	.start_IO = dasd_start_IO,
 	.term_IO = dasd_term_IO,
 	.handle_terminated_request = dasd_fba_handle_terminated_request,
 	.erp_action = dasd_fba_erp_action,
 	.erp_postaction = dasd_fba_erp_postaction,
-	.handle_unsolicited_interrupt = dasd_fba_handle_unsolicited_interrupt,
+	.check_for_device_change = dasd_fba_check_for_device_change,
 	.build_cp = dasd_fba_build_cp,
 	.free_cp = dasd_fba_free_cp,
 	.dump_sense = dasd_fba_dump_sense,
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 500678d7116..df9f6999411 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -231,6 +231,11 @@ struct dasd_ccw_req {
 /* per dasd_ccw_req flags */
 #define DASD_CQR_FLAGS_USE_ERP   0	/* use ERP for this request */
 #define DASD_CQR_FLAGS_FAILFAST  1	/* FAILFAST */
+#define DASD_CQR_VERIFY_PATH	 2	/* path verification request */
+#define DASD_CQR_ALLOW_SLOCK	 3	/* Try this request even when lock was
+					 * stolen. Should not be combined with
+					 * DASD_CQR_FLAGS_USE_ERP
+					 */
 
 /* Signature for error recovery functions. */
 typedef struct dasd_ccw_req *(*dasd_erp_fn_t) (struct dasd_ccw_req *);
@@ -287,6 +292,14 @@ struct dasd_discipline {
 	int (*do_analysis) (struct dasd_block *);
 
 	/*
+	 * This function is called, when new paths become available.
+	 * Disciplins may use this callback to do necessary setup work,
+	 * e.g. verify that new path is compatible with the current
+	 * configuration.
+	 */
+	int (*verify_path)(struct dasd_device *, __u8);
+
+	/*
 	 * Last things to do when a device is set online, and first things
 	 * when it is set offline.
 	 */
@@ -325,9 +338,9 @@ struct dasd_discipline {
 	void (*dump_sense) (struct dasd_device *, struct dasd_ccw_req *,
 			    struct irb *);
 	void (*dump_sense_dbf) (struct dasd_device *, struct irb *, char *);
-
-	void (*handle_unsolicited_interrupt) (struct dasd_device *,
-					      struct irb *);
+	void (*check_for_device_change) (struct dasd_device *,
+					 struct dasd_ccw_req *,
+					 struct irb *);
 
         /* i/o control functions. */
 	int (*fill_geometry) (struct dasd_block *, struct hd_geometry *);
@@ -362,6 +375,13 @@ extern struct dasd_discipline *dasd_diag_discipline_pointer;
 #define DASD_EER_STATECHANGE 3
 #define DASD_EER_PPRCSUSPEND 4
 
+struct dasd_path {
+	__u8 opm;
+	__u8 tbvpm;
+	__u8 ppm;
+	__u8 npm;
+};
+
 struct dasd_device {
 	/* Block device stuff. */
 	struct dasd_block *block;
@@ -377,6 +397,7 @@ struct dasd_device {
 	struct dasd_discipline *discipline;
 	struct dasd_discipline *base_discipline;
 	char *private;
+	struct dasd_path path_data;
 
 	/* Device state and target state. */
 	int state, target;
@@ -456,6 +477,9 @@ struct dasd_block {
 					 * confuse this with the user specified
 					 * read-only feature.
 					 */
+#define DASD_FLAG_IS_RESERVED	7	/* The device is reserved */
+#define DASD_FLAG_LOCK_STOLEN	8	/* The device lock was stolen */
+
 
 void dasd_put_device_wake(struct dasd_device *);
 
@@ -620,10 +644,15 @@ void dasd_generic_remove (struct ccw_device *cdev);
 int dasd_generic_set_online(struct ccw_device *, struct dasd_discipline *);
 int dasd_generic_set_offline (struct ccw_device *cdev);
 int dasd_generic_notify(struct ccw_device *, int);
+int dasd_generic_last_path_gone(struct dasd_device *);
+int dasd_generic_path_operational(struct dasd_device *);
+
 void dasd_generic_handle_state_change(struct dasd_device *);
 int dasd_generic_pm_freeze(struct ccw_device *);
 int dasd_generic_restore_device(struct ccw_device *);
 enum uc_todo dasd_generic_uc_handler(struct ccw_device *, struct irb *);
+void dasd_generic_path_event(struct ccw_device *, int *);
+int dasd_generic_verify_path(struct dasd_device *, __u8);
 
 int dasd_generic_read_dev_chars(struct dasd_device *, int, void *, int);
 char *dasd_get_sense(struct irb *);
diff --git a/drivers/s390/char/Kconfig b/drivers/s390/char/Kconfig
index 40834f18754..dcee3c5c895 100644
--- a/drivers/s390/char/Kconfig
+++ b/drivers/s390/char/Kconfig
@@ -2,76 +2,85 @@ comment "S/390 character device drivers"
 	depends on S390
 
 config TN3270
-	tristate "Support for locally attached 3270 terminals"
+	def_tristate y
+	prompt "Support for locally attached 3270 terminals"
 	depends on CCW
 	help
 	  Include support for IBM 3270 terminals.
 
 config TN3270_TTY
-	tristate "Support for tty input/output on 3270 terminals"
+	def_tristate y
+	prompt "Support for tty input/output on 3270 terminals"
 	depends on TN3270
 	help
 	  Include support for using an IBM 3270 terminal as a Linux tty.
 
 config TN3270_FS
-	tristate "Support for fullscreen applications on 3270 terminals"
+	def_tristate m
+	prompt "Support for fullscreen applications on 3270 terminals"
 	depends on TN3270
 	help
 	  Include support for fullscreen applications on an IBM 3270 terminal.
 
 config TN3270_CONSOLE
-	bool "Support for console on 3270 terminal"
+	def_bool y
+	prompt "Support for console on 3270 terminal"
 	depends on TN3270=y && TN3270_TTY=y
 	help
 	  Include support for using an IBM 3270 terminal as a Linux system
 	  console.  Available only if 3270 support is compiled in statically.
 
 config TN3215
-	bool "Support for 3215 line mode terminal"
+	def_bool y
+	prompt "Support for 3215 line mode terminal"
 	depends on CCW
 	help
 	  Include support for IBM 3215 line-mode terminals.
 
 config TN3215_CONSOLE
-	bool "Support for console on 3215 line mode terminal"
+	def_bool y
+	prompt "Support for console on 3215 line mode terminal"
 	depends on TN3215
 	help
 	  Include support for using an IBM 3215 line-mode terminal as a
 	  Linux system console.
 
 config CCW_CONSOLE
-	bool
-	depends on TN3215_CONSOLE || TN3270_CONSOLE
-	default y
+	def_bool y if TN3215_CONSOLE || TN3270_CONSOLE
 
 config SCLP_TTY
-	bool "Support for SCLP line mode terminal"
+	def_bool y
+	prompt "Support for SCLP line mode terminal"
 	depends on S390
 	help
 	  Include support for IBM SCLP line-mode terminals.
 
 config SCLP_CONSOLE
-	bool "Support for console on SCLP line mode terminal"
+	def_bool y
+	prompt "Support for console on SCLP line mode terminal"
 	depends on SCLP_TTY
 	help
 	  Include support for using an IBM HWC line-mode terminal as the Linux
 	  system console.
 
 config SCLP_VT220_TTY
-	bool "Support for SCLP VT220-compatible terminal"
+	def_bool y
+	prompt "Support for SCLP VT220-compatible terminal"
 	depends on S390
 	help
 	  Include support for an IBM SCLP VT220-compatible terminal.
 
 config SCLP_VT220_CONSOLE
-	bool "Support for console on SCLP VT220-compatible terminal"
+	def_bool y
+	prompt "Support for console on SCLP VT220-compatible terminal"
 	depends on SCLP_VT220_TTY
 	help
 	  Include support for using an IBM SCLP VT220-compatible terminal as a
 	  Linux system console.
 
 config SCLP_CPI
-	tristate "Control-Program Identification"
+	def_tristate m
+	prompt "Control-Program Identification"
 	depends on S390
 	help
 	  This option enables the hardware console interface for system
@@ -83,7 +92,8 @@ config SCLP_CPI
 	  need this feature and intend to run your kernel in LPAR.
 
 config SCLP_ASYNC
-	tristate "Support for Call Home via Asynchronous SCLP Records"
+	def_tristate m
+	prompt "Support for Call Home via Asynchronous SCLP Records"
 	depends on S390
 	help
 	  This option enables the call home function, which is able to inform
@@ -93,7 +103,8 @@ config SCLP_ASYNC
 	  need this feature and intend to run your kernel in LPAR.
 
 config S390_TAPE
-	tristate "S/390 tape device support"
+	def_tristate m
+	prompt "S/390 tape device support"
 	depends on CCW
 	help
 	  Select this option if you want to access channel-attached tape
@@ -109,7 +120,8 @@ comment "S/390 tape interface support"
 	depends on S390_TAPE
 
 config S390_TAPE_BLOCK
-	bool "Support for tape block devices"
+	def_bool y
+	prompt "Support for tape block devices"
 	depends on S390_TAPE && BLOCK
 	help
 	  Select this option if you want to access your channel-attached tape
@@ -123,7 +135,8 @@ comment "S/390 tape hardware support"
 	depends on S390_TAPE
 
 config S390_TAPE_34XX
-	tristate "Support for 3480/3490 tape hardware"
+	def_tristate m
+	prompt "Support for 3480/3490 tape hardware"
 	depends on S390_TAPE
 	help
 	  Select this option if you want to access IBM 3480/3490 magnetic
@@ -131,7 +144,8 @@ config S390_TAPE_34XX
 	  It is safe to say "Y" here.
 
 config S390_TAPE_3590
-	tristate "Support for 3590 tape hardware"
+	def_tristate m
+	prompt "Support for 3590 tape hardware"
 	depends on S390_TAPE
 	help
 	  Select this option if you want to access IBM 3590 magnetic
@@ -139,7 +153,8 @@ config S390_TAPE_3590
 	  It is safe to say "Y" here.
 
 config VMLOGRDR
-	tristate "Support for the z/VM recording system services (VM only)"
+	def_tristate m
+	prompt "Support for the z/VM recording system services (VM only)"
 	depends on IUCV
 	help
 	  Select this option if you want to be able to receive records collected
@@ -148,29 +163,31 @@ config VMLOGRDR
 	  This driver depends on the IUCV support driver.
 
 config VMCP
-	bool "Support for the z/VM CP interface"
+	def_bool y
+	prompt "Support for the z/VM CP interface"
 	depends on S390
 	help
 	  Select this option if you want to be able to interact with the control
 	  program on z/VM
 
 config MONREADER
-	tristate "API for reading z/VM monitor service records"
+	def_tristate m
+	prompt "API for reading z/VM monitor service records"
 	depends on IUCV
 	help
 	  Character device driver for reading z/VM monitor service records
 
 config MONWRITER
-	tristate "API for writing z/VM monitor service records"
+	def_tristate m
+	prompt "API for writing z/VM monitor service records"
 	depends on S390
-	default "m"
 	help
 	  Character device driver for writing z/VM monitor service records
 
 config S390_VMUR
-	tristate "z/VM unit record device driver"
+	def_tristate m
+	prompt "z/VM unit record device driver"
 	depends on S390
-	default "m"
 	help
 	  Character device driver for z/VM reader, puncher and printer.
 
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
index 59ec073724b..3fb4335d491 100644
--- a/drivers/s390/char/con3215.c
+++ b/drivers/s390/char/con3215.c
@@ -9,6 +9,7 @@
  *	      Dan Morrison, IBM Corporation <dmorriso@cse.buffalo.edu>
  */
 
+#include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kdev_t.h>
@@ -361,6 +362,7 @@ static void raw3215_irq(struct ccw_device *cdev, unsigned long intparm,
 	int cstat, dstat;
 	int count;
 
+	kstat_cpu(smp_processor_id()).irqs[IOINT_C15]++;
 	raw = dev_get_drvdata(&cdev->dev);
 	req = (struct raw3215_req *) intparm;
 	cstat = irb->scsw.cmd.cstat;
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
index eb28fb01a38..f6489eb7e97 100644
--- a/drivers/s390/char/fs3270.c
+++ b/drivers/s390/char/fs3270.c
@@ -14,7 +14,6 @@
 #include <linux/list.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include <linux/smp_lock.h>
 
 #include <asm/compat.h>
 #include <asm/ccwdev.h>
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 2a4c566456e..96ba2fd1c8a 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -7,6 +7,7 @@
  *     Copyright IBM Corp. 2003, 2009
  */
 
+#include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/init.h>
@@ -329,6 +330,7 @@ raw3270_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	struct raw3270_request *rq;
 	int rc;
 
+	kstat_cpu(smp_processor_id()).irqs[IOINT_C70]++;
 	rp = dev_get_drvdata(&cdev->dev);
 	if (!rp)
 		return;
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 35cc4686b99..b76c61f8248 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -7,6 +7,7 @@
  *	      Martin Schwidefsky <schwidefsky@de.ibm.com>
  */
 
+#include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/spinlock.h>
@@ -18,16 +19,14 @@
 #include <linux/suspend.h>
 #include <linux/completion.h>
 #include <linux/platform_device.h>
-#include <asm/types.h>
 #include <asm/s390_ext.h>
+#include <asm/types.h>
+#include <asm/irq.h>
 
 #include "sclp.h"
 
 #define SCLP_HEADER		"sclp: "
 
-/* Structure for register_early_external_interrupt. */
-static ext_int_info_t ext_int_info_hwc;
-
 /* Lock to protect internal data consistency. */
 static DEFINE_SPINLOCK(sclp_lock);
 
@@ -402,6 +401,7 @@ static void sclp_interrupt_handler(unsigned int ext_int_code,
 	u32 finished_sccb;
 	u32 evbuf_pending;
 
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_SCP]++;
 	spin_lock(&sclp_lock);
 	finished_sccb = param32 & 0xfffffff8;
 	evbuf_pending = param32 & 0x3;
@@ -824,6 +824,7 @@ static void sclp_check_handler(unsigned int ext_int_code,
 {
 	u32 finished_sccb;
 
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_SCP]++;
 	finished_sccb = param32 & 0xfffffff8;
 	/* Is this the interrupt we are waiting for? */
 	if (finished_sccb == 0)
@@ -866,8 +867,7 @@ sclp_check_interface(void)
 
 	spin_lock_irqsave(&sclp_lock, flags);
 	/* Prepare init mask command */
-	rc = register_early_external_interrupt(0x2401, sclp_check_handler,
-					       &ext_int_info_hwc);
+	rc = register_external_interrupt(0x2401, sclp_check_handler);
 	if (rc) {
 		spin_unlock_irqrestore(&sclp_lock, flags);
 		return rc;
@@ -900,8 +900,7 @@ sclp_check_interface(void)
 		} else
 			rc = -EBUSY;
 	}
-	unregister_early_external_interrupt(0x2401, sclp_check_handler,
-					    &ext_int_info_hwc);
+	unregister_external_interrupt(0x2401, sclp_check_handler);
 	spin_unlock_irqrestore(&sclp_lock, flags);
 	return rc;
 }
@@ -1064,8 +1063,7 @@ sclp_init(void)
 	if (rc)
 		goto fail_init_state_uninitialized;
 	/* Register interrupt handler */
-	rc = register_early_external_interrupt(0x2401, sclp_interrupt_handler,
-					       &ext_int_info_hwc);
+	rc = register_external_interrupt(0x2401, sclp_interrupt_handler);
 	if (rc)
 		goto fail_unregister_reboot_notifier;
 	sclp_init_state = sclp_init_state_initialized;
diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c
index b497afe061c..16e232a99fb 100644
--- a/drivers/s390/char/sclp_config.c
+++ b/drivers/s390/char/sclp_config.c
@@ -33,6 +33,7 @@ static void sclp_cpu_capability_notify(struct work_struct *work)
 	int cpu;
 	struct sys_device *sysdev;
 
+	s390_adjust_jiffies();
 	pr_warning("cpu capability changed.\n");
 	get_online_cpus();
 	for_each_online_cpu(cpu) {
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index deff2c3361e..fbe361fcd2c 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -24,6 +24,8 @@
 #include "tape_std.h"
 #include "tape_3590.h"
 
+static struct workqueue_struct *tape_3590_wq;
+
 /*
  * Pointer to debug area.
  */
@@ -613,7 +615,7 @@ tape_3590_schedule_work(struct tape_device *device, enum tape_op op)
 	p->device = tape_get_device(device);
 	p->op = op;
 
-	schedule_work(&p->work);
+	queue_work(tape_3590_wq, &p->work);
 	return 0;
 }
 
@@ -1629,7 +1631,7 @@ fail_kmalloc:
 static void
 tape_3590_cleanup_device(struct tape_device *device)
 {
-	flush_scheduled_work();
+	flush_workqueue(tape_3590_wq);
 	tape_std_unassign(device);
 
 	kfree(device->discdata);
@@ -1733,11 +1735,17 @@ tape_3590_init(void)
 #endif
 
 	DBF_EVENT(3, "3590 init\n");
+
+	tape_3590_wq = alloc_workqueue("tape_3590", 0, 0);
+	if (!tape_3590_wq)
+		return -ENOMEM;
+
 	/* Register driver for 3590 tapes. */
 	rc = ccw_driver_register(&tape_3590_driver);
-	if (rc)
+	if (rc) {
+		destroy_workqueue(tape_3590_wq);
 		DBF_EVENT(3, "3590 init failed\n");
-	else
+	} else
 		DBF_EVENT(3, "3590 registered\n");
 	return rc;
 }
@@ -1746,7 +1754,7 @@ static void
 tape_3590_exit(void)
 {
 	ccw_driver_unregister(&tape_3590_driver);
-
+	destroy_workqueue(tape_3590_wq);
 	debug_unregister(TAPE_DBF_AREA);
 }
 
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index f0fa9ca5cb2..55d2d0f4eab 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -264,7 +264,7 @@ cleanup_queue:
 void
 tapeblock_cleanup_device(struct tape_device *device)
 {
-	flush_scheduled_work();
+	flush_work_sync(&device->blk_data.requeue_task);
 	tape_put_device(device);
 
 	if (!device->blk_data.disk) {
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index 883e2db02bd..e090a307fde 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -17,7 +17,6 @@
 #include <linux/types.h>
 #include <linux/proc_fs.h>
 #include <linux/mtio.h>
-#include <linux/smp_lock.h>
 #include <linux/compat.h>
 
 #include <asm/uaccess.h>
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 6c408670e08..7978a0adeaf 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -14,6 +14,7 @@
 #define KMSG_COMPONENT "tape"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/init.h>	     // for kernel parameters
 #include <linux/kmod.h>	     // for requesting modules
@@ -209,29 +210,79 @@ tape_state_set(struct tape_device *device, enum tape_state newstate)
 	wake_up(&device->state_change_wq);
 }
 
+struct tape_med_state_work_data {
+	struct tape_device *device;
+	enum tape_medium_state state;
+	struct work_struct  work;
+};
+
+static void
+tape_med_state_work_handler(struct work_struct *work)
+{
+	static char env_state_loaded[] = "MEDIUM_STATE=LOADED";
+	static char env_state_unloaded[] = "MEDIUM_STATE=UNLOADED";
+	struct tape_med_state_work_data *p =
+		container_of(work, struct tape_med_state_work_data, work);
+	struct tape_device *device = p->device;
+	char *envp[] = { NULL, NULL };
+
+	switch (p->state) {
+	case MS_UNLOADED:
+		pr_info("%s: The tape cartridge has been successfully "
+			"unloaded\n", dev_name(&device->cdev->dev));
+		envp[0] = env_state_unloaded;
+		kobject_uevent_env(&device->cdev->dev.kobj, KOBJ_CHANGE, envp);
+		break;
+	case MS_LOADED:
+		pr_info("%s: A tape cartridge has been mounted\n",
+			dev_name(&device->cdev->dev));
+		envp[0] = env_state_loaded;
+		kobject_uevent_env(&device->cdev->dev.kobj, KOBJ_CHANGE, envp);
+		break;
+	default:
+		break;
+	}
+	tape_put_device(device);
+	kfree(p);
+}
+
+static void
+tape_med_state_work(struct tape_device *device, enum tape_medium_state state)
+{
+	struct tape_med_state_work_data *p;
+
+	p = kzalloc(sizeof(*p), GFP_ATOMIC);
+	if (p) {
+		INIT_WORK(&p->work, tape_med_state_work_handler);
+		p->device = tape_get_device(device);
+		p->state = state;
+		schedule_work(&p->work);
+	}
+}
+
 void
 tape_med_state_set(struct tape_device *device, enum tape_medium_state newstate)
 {
-	if (device->medium_state == newstate)
+	enum tape_medium_state oldstate;
+
+	oldstate = device->medium_state;
+	if (oldstate == newstate)
 		return;
+	device->medium_state = newstate;
 	switch(newstate){
 	case MS_UNLOADED:
 		device->tape_generic_status |= GMT_DR_OPEN(~0);
-		if (device->medium_state == MS_LOADED)
-			pr_info("%s: The tape cartridge has been successfully "
-				"unloaded\n", dev_name(&device->cdev->dev));
+		if (oldstate == MS_LOADED)
+			tape_med_state_work(device, MS_UNLOADED);
 		break;
 	case MS_LOADED:
 		device->tape_generic_status &= ~GMT_DR_OPEN(~0);
-		if (device->medium_state == MS_UNLOADED)
-			pr_info("%s: A tape cartridge has been mounted\n",
-				dev_name(&device->cdev->dev));
+		if (oldstate == MS_UNLOADED)
+			tape_med_state_work(device, MS_LOADED);
 		break;
 	default:
-		// print nothing
 		break;
 	}
-	device->medium_state = newstate;
 	wake_up(&device->state_change_wq);
 }
 
@@ -1064,6 +1115,7 @@ __tape_do_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	struct tape_request *request;
 	int rc;
 
+	kstat_cpu(smp_processor_id()).irqs[IOINT_TAP]++;
 	device = dev_get_drvdata(&cdev->dev);
 	if (device == NULL) {
 		return;
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index 9f661426e4a..c837d7419a6 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -30,7 +30,6 @@
 #include <linux/kmod.h>
 #include <linux/cdev.h>
 #include <linux/device.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 
 MODULE_AUTHOR
@@ -249,27 +248,25 @@ static int vmlogrdr_recording(struct vmlogrdr_priv_t * logptr,
 	char cp_command[80];
 	char cp_response[160];
 	char *onoff, *qid_string;
+	int rc;
 
-	memset(cp_command, 0x00, sizeof(cp_command));
-	memset(cp_response, 0x00, sizeof(cp_response));
-
-        onoff = ((action == 1) ? "ON" : "OFF");
+	onoff = ((action == 1) ? "ON" : "OFF");
 	qid_string = ((recording_class_AB == 1) ? " QID * " : "");
 
-        /*
+	/*
 	 * The recording commands needs to be called with option QID
 	 * for guests that have previlege classes A or B.
 	 * Purging has to be done as separate step, because recording
 	 * can't be switched on as long as records are on the queue.
 	 * Doing both at the same time doesn't work.
 	 */
-
-	if (purge) {
+	if (purge && (action == 1)) {
+		memset(cp_command, 0x00, sizeof(cp_command));
+		memset(cp_response, 0x00, sizeof(cp_response));
 		snprintf(cp_command, sizeof(cp_command),
 			 "RECORDING %s PURGE %s",
 			 logptr->recording_name,
 			 qid_string);
-
 		cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
 	}
 
@@ -279,19 +276,33 @@ static int vmlogrdr_recording(struct vmlogrdr_priv_t * logptr,
 		logptr->recording_name,
 		onoff,
 		qid_string);
-
 	cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
 	/* The recording command will usually answer with 'Command complete'
 	 * on success, but when the specific service was never connected
 	 * before then there might be an additional informational message
 	 * 'HCPCRC8072I Recording entry not found' before the
-         * 'Command complete'. So I use strstr rather then the strncmp.
+	 * 'Command complete'. So I use strstr rather then the strncmp.
 	 */
 	if (strstr(cp_response,"Command complete"))
-		return 0;
+		rc = 0;
 	else
-		return -EIO;
+		rc = -EIO;
+	/*
+	 * If we turn recording off, we have to purge any remaining records
+	 * afterwards, as a large number of queued records may impact z/VM
+	 * performance.
+	 */
+	if (purge && (action == 0)) {
+		memset(cp_command, 0x00, sizeof(cp_command));
+		memset(cp_response, 0x00, sizeof(cp_response));
+		snprintf(cp_command, sizeof(cp_command),
+			 "RECORDING %s PURGE %s",
+			 logptr->recording_name,
+			 qid_string);
+		cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
+	}
 
+	return rc;
 }
 
 
diff --git a/drivers/s390/char/vmur.c b/drivers/s390/char/vmur.c
index 1de672f2103..caef1757341 100644
--- a/drivers/s390/char/vmur.c
+++ b/drivers/s390/char/vmur.c
@@ -11,9 +11,9 @@
 #define KMSG_COMPONENT "vmur"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/kernel_stat.h>
 #include <linux/cdev.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 
 #include <asm/uaccess.h>
 #include <asm/cio.h>
@@ -303,6 +303,7 @@ static void ur_int_handler(struct ccw_device *cdev, unsigned long intparm,
 {
 	struct urdev *urd;
 
+	kstat_cpu(smp_processor_id()).irqs[IOINT_VMR]++;
 	TRACE("ur_int_handler: intparm=0x%lx cstat=%02x dstat=%02x res=%u\n",
 	      intparm, irb->scsw.cmd.cstat, irb->scsw.cmd.dstat,
 	      irb->scsw.cmd.count);
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 97b25d68e3e..2864581d8ec 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -67,6 +67,27 @@ __ccwgroup_remove_symlinks(struct ccwgroup_device *gdev)
 }
 
 /*
+ * Remove references from ccw devices to ccw group device and from
+ * ccw group device to ccw devices.
+ */
+static void __ccwgroup_remove_cdev_refs(struct ccwgroup_device *gdev)
+{
+	struct ccw_device *cdev;
+	int i;
+
+	for (i = 0; i < gdev->count; i++) {
+		cdev = gdev->cdev[i];
+		if (!cdev)
+			continue;
+		spin_lock_irq(cdev->ccwlock);
+		dev_set_drvdata(&cdev->dev, NULL);
+		spin_unlock_irq(cdev->ccwlock);
+		gdev->cdev[i] = NULL;
+		put_device(&cdev->dev);
+	}
+}
+
+/*
  * Provide an 'ungroup' attribute so the user can remove group devices no
  * longer needed or accidentially created. Saves memory :)
  */
@@ -78,6 +99,7 @@ static void ccwgroup_ungroup_callback(struct device *dev)
 	if (device_is_registered(&gdev->dev)) {
 		__ccwgroup_remove_symlinks(gdev);
 		device_unregister(dev);
+		__ccwgroup_remove_cdev_refs(gdev);
 	}
 	mutex_unlock(&gdev->reg_mutex);
 }
@@ -116,21 +138,7 @@ static DEVICE_ATTR(ungroup, 0200, NULL, ccwgroup_ungroup_store);
 static void
 ccwgroup_release (struct device *dev)
 {
-	struct ccwgroup_device *gdev;
-	int i;
-
-	gdev = to_ccwgroupdev(dev);
-
-	for (i = 0; i < gdev->count; i++) {
-		if (gdev->cdev[i]) {
-			spin_lock_irq(gdev->cdev[i]->ccwlock);
-			if (dev_get_drvdata(&gdev->cdev[i]->dev) == gdev)
-				dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
-			spin_unlock_irq(gdev->cdev[i]->ccwlock);
-			put_device(&gdev->cdev[i]->dev);
-		}
-	}
-	kfree(gdev);
+	kfree(to_ccwgroupdev(dev));
 }
 
 static int
@@ -639,6 +647,7 @@ void ccwgroup_driver_unregister(struct ccwgroup_driver *cdriver)
 		mutex_lock(&gdev->reg_mutex);
 		__ccwgroup_remove_symlinks(gdev);
 		device_unregister(dev);
+		__ccwgroup_remove_cdev_refs(gdev);
 		mutex_unlock(&gdev->reg_mutex);
 		put_device(dev);
 	}
@@ -660,25 +669,6 @@ int ccwgroup_probe_ccwdev(struct ccw_device *cdev)
 	return 0;
 }
 
-static struct ccwgroup_device *
-__ccwgroup_get_gdev_by_cdev(struct ccw_device *cdev)
-{
-	struct ccwgroup_device *gdev;
-
-	gdev = dev_get_drvdata(&cdev->dev);
-	if (gdev) {
-		if (get_device(&gdev->dev)) {
-			mutex_lock(&gdev->reg_mutex);
-			if (device_is_registered(&gdev->dev))
-				return gdev;
-			mutex_unlock(&gdev->reg_mutex);
-			put_device(&gdev->dev);
-		}
-		return NULL;
-	}
-	return NULL;
-}
-
 /**
  * ccwgroup_remove_ccwdev() - remove function for slave devices
  * @cdev: ccw device to be removed
@@ -694,13 +684,25 @@ void ccwgroup_remove_ccwdev(struct ccw_device *cdev)
 	/* Ignore offlining errors, device is gone anyway. */
 	ccw_device_set_offline(cdev);
 	/* If one of its devices is gone, the whole group is done for. */
-	gdev = __ccwgroup_get_gdev_by_cdev(cdev);
-	if (gdev) {
+	spin_lock_irq(cdev->ccwlock);
+	gdev = dev_get_drvdata(&cdev->dev);
+	if (!gdev) {
+		spin_unlock_irq(cdev->ccwlock);
+		return;
+	}
+	/* Get ccwgroup device reference for local processing. */
+	get_device(&gdev->dev);
+	spin_unlock_irq(cdev->ccwlock);
+	/* Unregister group device. */
+	mutex_lock(&gdev->reg_mutex);
+	if (device_is_registered(&gdev->dev)) {
 		__ccwgroup_remove_symlinks(gdev);
 		device_unregister(&gdev->dev);
-		mutex_unlock(&gdev->reg_mutex);
-		put_device(&gdev->dev);
+		__ccwgroup_remove_cdev_refs(gdev);
 	}
+	mutex_unlock(&gdev->reg_mutex);
+	/* Release ccwgroup device reference for local processing. */
+	put_device(&gdev->dev);
 }
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 1aaddea673e..0689fcf23a1 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -695,6 +695,25 @@ out:
 	return ret;
 }
 
+int chsc_determine_fmt1_channel_path_desc(struct chp_id chpid,
+					  struct channel_path_desc_fmt1 *desc)
+{
+	struct chsc_response_struct *chsc_resp;
+	struct chsc_scpd *scpd_area;
+	int ret;
+
+	spin_lock_irq(&chsc_page_lock);
+	scpd_area = chsc_page;
+	ret = chsc_determine_channel_path_desc(chpid, 0, 0, 1, 0, scpd_area);
+	if (ret)
+		goto out;
+	chsc_resp = (void *)&scpd_area->response;
+	memcpy(desc, &chsc_resp->data, sizeof(*desc));
+out:
+	spin_unlock_irq(&chsc_page_lock);
+	return ret;
+}
+
 static void
 chsc_initialize_cmg_chars(struct channel_path *chp, u8 cmcv,
 			  struct cmg_chars *chars)
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index 6693f5e3176..3f15b2aaeae 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -35,6 +35,22 @@ struct channel_path_desc {
 	u8 chpp;
 } __attribute__ ((packed));
 
+struct channel_path_desc_fmt1 {
+	u8 flags;
+	u8 lsn;
+	u8 desc;
+	u8 chpid;
+	u32:24;
+	u8 chpp;
+	u32 unused[3];
+	u16 mdc;
+	u16:13;
+	u8 r:1;
+	u8 s:1;
+	u8 f:1;
+	u32 zeros[2];
+} __attribute__ ((packed));
+
 struct channel_path;
 
 struct css_chsc_char {
@@ -92,6 +108,8 @@ int chsc_determine_channel_path_desc(struct chp_id chpid, int fmt, int rfmt,
 				     int c, int m, void *page);
 int chsc_determine_base_channel_path_desc(struct chp_id chpid,
 					  struct channel_path_desc *desc);
+int chsc_determine_fmt1_channel_path_desc(struct chp_id chpid,
+					  struct channel_path_desc_fmt1 *desc);
 void chsc_chp_online(struct chp_id chpid);
 void chsc_chp_offline(struct chp_id chpid);
 int chsc_get_channel_measurement_chars(struct channel_path *chp);
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index f4e6cf3aceb..430f875006f 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -619,7 +619,7 @@ void __irq_entry do_IRQ(struct pt_regs *regs)
 	s390_idle_check(regs, S390_lowcore.int_clock,
 			S390_lowcore.async_enter_timer);
 	irq_enter();
-	__get_cpu_var(s390_idle).nohz_delay = 1;
+	__this_cpu_write(s390_idle.nohz_delay, 1);
 	if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
 		/* Serve timer interrupts first. */
 		clock_comparator_work();
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index a5050e21715..24d8e97355b 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -618,6 +618,7 @@ EXPORT_SYMBOL_GPL(css_schedule_reprobe);
 static void css_process_crw(struct crw *crw0, struct crw *crw1, int overflow)
 {
 	struct subchannel_id mchk_schid;
+	struct subchannel *sch;
 
 	if (overflow) {
 		css_schedule_eval_all();
@@ -635,8 +636,15 @@ static void css_process_crw(struct crw *crw0, struct crw *crw1, int overflow)
 	init_subchannel_id(&mchk_schid);
 	mchk_schid.sch_no = crw0->rsid;
 	if (crw1)
-		mchk_schid.ssid = (crw1->rsid >> 8) & 3;
+		mchk_schid.ssid = (crw1->rsid >> 4) & 3;
 
+	if (crw0->erc == CRW_ERC_PMOD) {
+		sch = get_subchannel_by_schid(mchk_schid);
+		if (sch) {
+			css_update_ssd_info(sch);
+			put_device(&sch->dev);
+		}
+	}
 	/*
 	 * Since we are always presented with IPI in the CRW, we have to
 	 * use stsch() to find out if the subchannel in question has come
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 2ff8a22d425..e8391b89eff 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -1455,7 +1455,16 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process)
 		break;
 	case IO_SCH_UNREG_ATTACH:
 	case IO_SCH_UNREG:
-		if (cdev)
+		if (!cdev)
+			break;
+		if (cdev->private->state == DEV_STATE_SENSE_ID) {
+			/*
+			 * Note: delayed work triggered by this event
+			 * and repeated calls to sch_event are synchronized
+			 * by the above check for work_pending(cdev).
+			 */
+			dev_fsm_event(cdev, DEV_EVENT_NOTOPER);
+		} else
 			ccw_device_set_notoper(cdev);
 		break;
 	case IO_SCH_NOP:
diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c
index 6da84543dfe..651976b54af 100644
--- a/drivers/s390/cio/device_ops.c
+++ b/drivers/s390/cio/device_ops.c
@@ -687,6 +687,46 @@ int ccw_device_tm_start_timeout(struct ccw_device *cdev, struct tcw *tcw,
 EXPORT_SYMBOL(ccw_device_tm_start_timeout);
 
 /**
+ * ccw_device_get_mdc - accumulate max data count
+ * @cdev: ccw device for which the max data count is accumulated
+ * @mask: mask of paths to use
+ *
+ * Return the number of 64K-bytes blocks all paths at least support
+ * for a transport command. Return values <= 0 indicate failures.
+ */
+int ccw_device_get_mdc(struct ccw_device *cdev, u8 mask)
+{
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+	struct channel_path_desc_fmt1 desc;
+	struct chp_id chpid;
+	int mdc = 0, ret, i;
+
+	/* Adjust requested path mask to excluded varied off paths. */
+	if (mask)
+		mask &= sch->lpm;
+	else
+		mask = sch->lpm;
+
+	chp_id_init(&chpid);
+	for (i = 0; i < 8; i++) {
+		if (!(mask & (0x80 >> i)))
+			continue;
+		chpid.id = sch->schib.pmcw.chpid[i];
+		ret = chsc_determine_fmt1_channel_path_desc(chpid, &desc);
+		if (ret)
+			return ret;
+		if (!desc.f)
+			return 0;
+		if (!desc.r)
+			mdc = 1;
+		mdc = mdc ? min(mdc, (int)desc.mdc) : desc.mdc;
+	}
+
+	return mdc;
+}
+EXPORT_SYMBOL(ccw_device_get_mdc);
+
+/**
  * ccw_device_tm_intrg - perform interrogate function
  * @cdev: ccw device on which to perform the interrogate function
  *
diff --git a/drivers/s390/cio/itcw.c b/drivers/s390/cio/itcw.c
index a0ae2956477..358ee16d10a 100644
--- a/drivers/s390/cio/itcw.c
+++ b/drivers/s390/cio/itcw.c
@@ -93,6 +93,7 @@ EXPORT_SYMBOL(itcw_get_tcw);
 size_t itcw_calc_size(int intrg, int max_tidaws, int intrg_max_tidaws)
 {
 	size_t len;
+	int cross_count;
 
 	/* Main data. */
 	len = sizeof(struct itcw);
@@ -105,12 +106,27 @@ size_t itcw_calc_size(int intrg, int max_tidaws, int intrg_max_tidaws)
 		       /* TSB */ sizeof(struct tsb) +
 		       /* TIDAL */ intrg_max_tidaws * sizeof(struct tidaw);
 	}
+
 	/* Maximum required alignment padding. */
 	len += /* Initial TCW */ 63 + /* Interrogate TCCB */ 7;
-	/* Maximum padding for structures that may not cross 4k boundary. */
-	if ((max_tidaws > 0) || (intrg_max_tidaws > 0))
-		len += max(max_tidaws, intrg_max_tidaws) *
-		       sizeof(struct tidaw) - 1;
+
+	/* TIDAW lists may not cross a 4k boundary. To cross a
+	 * boundary we need to add a TTIC TIDAW. We need to reserve
+	 * one additional TIDAW for a TTIC that we may need to add due
+	 * to the placement of the data chunk in memory, and a further
+	 * TIDAW for each page boundary that the TIDAW list may cross
+	 * due to it's own size.
+	 */
+	if (max_tidaws) {
+		cross_count = 1 + ((max_tidaws * sizeof(struct tidaw) - 1)
+				   >> PAGE_SHIFT);
+		len += cross_count * sizeof(struct tidaw);
+	}
+	if (intrg_max_tidaws) {
+		cross_count = 1 + ((intrg_max_tidaws * sizeof(struct tidaw) - 1)
+				   >> PAGE_SHIFT);
+		len += cross_count * sizeof(struct tidaw);
+	}
 	return len;
 }
 EXPORT_SYMBOL(itcw_calc_size);
@@ -165,6 +181,7 @@ struct itcw *itcw_init(void *buffer, size_t size, int op, int intrg,
 	void *chunk;
 	addr_t start;
 	addr_t end;
+	int cross_count;
 
 	/* Check for 2G limit. */
 	start = (addr_t) buffer;
@@ -177,8 +194,17 @@ struct itcw *itcw_init(void *buffer, size_t size, int op, int intrg,
 	if (IS_ERR(chunk))
 		return chunk;
 	itcw = chunk;
-	itcw->max_tidaws = max_tidaws;
-	itcw->intrg_max_tidaws = intrg_max_tidaws;
+	/* allow for TTIC tidaws that may be needed to cross a page boundary */
+	cross_count = 0;
+	if (max_tidaws)
+		cross_count = 1 + ((max_tidaws * sizeof(struct tidaw) - 1)
+				   >> PAGE_SHIFT);
+	itcw->max_tidaws = max_tidaws + cross_count;
+	cross_count = 0;
+	if (intrg_max_tidaws)
+		cross_count = 1 + ((intrg_max_tidaws * sizeof(struct tidaw) - 1)
+				   >> PAGE_SHIFT);
+	itcw->intrg_max_tidaws = intrg_max_tidaws + cross_count;
 	/* Main TCW. */
 	chunk = fit_chunk(&start, end, sizeof(struct tcw), 64, 0);
 	if (IS_ERR(chunk))
@@ -198,7 +224,7 @@ struct itcw *itcw_init(void *buffer, size_t size, int op, int intrg,
 	/* Data TIDAL. */
 	if (max_tidaws > 0) {
 		chunk = fit_chunk(&start, end, sizeof(struct tidaw) *
-				  max_tidaws, 16, 1);
+				  itcw->max_tidaws, 16, 0);
 		if (IS_ERR(chunk))
 			return chunk;
 		tcw_set_data(itcw->tcw, chunk, 1);
@@ -206,7 +232,7 @@ struct itcw *itcw_init(void *buffer, size_t size, int op, int intrg,
 	/* Interrogate data TIDAL. */
 	if (intrg && (intrg_max_tidaws > 0)) {
 		chunk = fit_chunk(&start, end, sizeof(struct tidaw) *
-				  intrg_max_tidaws, 16, 1);
+				  itcw->intrg_max_tidaws, 16, 0);
 		if (IS_ERR(chunk))
 			return chunk;
 		tcw_set_data(itcw->intrg_tcw, chunk, 1);
@@ -283,13 +309,29 @@ EXPORT_SYMBOL(itcw_add_dcw);
  * the new tidaw on success or -%ENOSPC if the new tidaw would exceed the
  * available space.
  *
- * Note: the tidaw-list is assumed to be contiguous with no ttics. The
- * last-tidaw flag for the last tidaw in the list will be set by itcw_finalize.
+ * Note: TTIC tidaws are automatically added when needed, so explicitly calling
+ * this interface with the TTIC flag is not supported. The last-tidaw flag
+ * for the last tidaw in the list will be set by itcw_finalize.
  */
 struct tidaw *itcw_add_tidaw(struct itcw *itcw, u8 flags, void *addr, u32 count)
 {
+	struct tidaw *following;
+
 	if (itcw->num_tidaws >= itcw->max_tidaws)
 		return ERR_PTR(-ENOSPC);
+	/*
+	 * Is the tidaw, which follows the one we are about to fill, on the next
+	 * page? Then we have to insert a TTIC tidaw first, that points to the
+	 * tidaw on the new page.
+	 */
+	following = ((struct tidaw *) tcw_get_data(itcw->tcw))
+		+ itcw->num_tidaws + 1;
+	if (itcw->num_tidaws && !((unsigned long) following & ~PAGE_MASK)) {
+		tcw_add_tidaw(itcw->tcw, itcw->num_tidaws++,
+			      TIDAW_FLAGS_TTIC, following, 0);
+		if (itcw->num_tidaws >= itcw->max_tidaws)
+			return ERR_PTR(-ENOSPC);
+	}
 	return tcw_add_tidaw(itcw->tcw, itcw->num_tidaws++, flags, addr, count);
 }
 EXPORT_SYMBOL(itcw_add_tidaw);
diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h
index 0f4ef8769a3..7bc643f3f5a 100644
--- a/drivers/s390/cio/qdio.h
+++ b/drivers/s390/cio/qdio.h
@@ -91,6 +91,12 @@ enum qdio_irq_states {
 #define AC1_SC_QEBSM_AVAILABLE		0x02	/* available for subchannel */
 #define AC1_SC_QEBSM_ENABLED		0x01	/* enabled for subchannel */
 
+/* SIGA flags */
+#define QDIO_SIGA_WRITE		0x00
+#define QDIO_SIGA_READ		0x01
+#define QDIO_SIGA_SYNC		0x02
+#define QDIO_SIGA_QEBSM_FLAG	0x80
+
 #ifdef CONFIG_64BIT
 static inline int do_sqbs(u64 token, unsigned char state, int queue,
 			  int *start, int *count)
@@ -142,10 +148,9 @@ struct siga_flag {
 	u8 input:1;
 	u8 output:1;
 	u8 sync:1;
-	u8 no_sync_ti:1;
-	u8 no_sync_out_ti:1;
-	u8 no_sync_out_pci:1;
-	u8:2;
+	u8 sync_after_ai:1;
+	u8 sync_out_after_pci:1;
+	u8:3;
 } __attribute__ ((packed));
 
 struct chsc_ssqd_area {
@@ -202,6 +207,7 @@ struct qdio_dev_perf_stat {
 	unsigned int inbound_queue_full;
 	unsigned int outbound_call;
 	unsigned int outbound_handler;
+	unsigned int outbound_queue_full;
 	unsigned int fast_requeue;
 	unsigned int target_full;
 	unsigned int eqbs;
@@ -245,10 +251,10 @@ struct qdio_input_q {
 struct qdio_output_q {
 	/* PCIs are enabled for the queue */
 	int pci_out_enabled;
-	/* IQDIO: output multiple buffers (enhanced SIGA) */
-	int use_enh_siga;
 	/* timer to check for more outbound work */
 	struct timer_list timer;
+	/* used SBALs before tasklet schedule */
+	int scan_threshold;
 };
 
 /*
@@ -383,12 +389,13 @@ static inline int multicast_outbound(struct qdio_q *q)
 	(q->irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)
 #define is_qebsm(q)			(q->irq_ptr->sch_token != 0)
 
-#define need_siga_sync_thinint(q)	(!q->irq_ptr->siga_flag.no_sync_ti)
-#define need_siga_sync_out_thinint(q)	(!q->irq_ptr->siga_flag.no_sync_out_ti)
 #define need_siga_in(q)			(q->irq_ptr->siga_flag.input)
 #define need_siga_out(q)		(q->irq_ptr->siga_flag.output)
-#define need_siga_sync(q)		(q->irq_ptr->siga_flag.sync)
-#define siga_syncs_out_pci(q)		(q->irq_ptr->siga_flag.no_sync_out_pci)
+#define need_siga_sync(q)		(unlikely(q->irq_ptr->siga_flag.sync))
+#define need_siga_sync_after_ai(q)	\
+	(unlikely(q->irq_ptr->siga_flag.sync_after_ai))
+#define need_siga_sync_out_after_pci(q)	\
+	(unlikely(q->irq_ptr->siga_flag.sync_out_after_pci))
 
 #define for_each_input_queue(irq_ptr, q, i)	\
 	for (i = 0, q = irq_ptr->input_qs[0];	\
@@ -423,9 +430,9 @@ struct indicator_t {
 
 extern struct indicator_t *q_indicators;
 
-static inline int shared_ind(struct qdio_irq *irq_ptr)
+static inline int shared_ind(u32 *dsci)
 {
-	return irq_ptr->dsci == &q_indicators[TIQDIO_SHARED_IND].ind;
+	return dsci == &q_indicators[TIQDIO_SHARED_IND].ind;
 }
 
 /* prototypes for thin interrupt */
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index 28868e7471a..f8b03a636e4 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -151,6 +151,7 @@ static char *qperf_names[] = {
 	"Inbound queue full",
 	"Outbound calls",
 	"Outbound handler",
+	"Outbound queue full",
 	"Outbound fast_requeue",
 	"Outbound target_full",
 	"QEBSM eqbs",
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 5fcfa7f9e9e..e9fff2b9bce 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -14,6 +14,7 @@
 #include <linux/timer.h>
 #include <linux/delay.h>
 #include <linux/gfp.h>
+#include <linux/kernel_stat.h>
 #include <asm/atomic.h>
 #include <asm/debug.h>
 #include <asm/qdio.h>
@@ -29,11 +30,12 @@ MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>,"\
 MODULE_DESCRIPTION("QDIO base support");
 MODULE_LICENSE("GPL");
 
-static inline int do_siga_sync(struct subchannel_id schid,
-			       unsigned int out_mask, unsigned int in_mask)
+static inline int do_siga_sync(unsigned long schid,
+			       unsigned int out_mask, unsigned int in_mask,
+			       unsigned int fc)
 {
-	register unsigned long __fc asm ("0") = 2;
-	register struct subchannel_id __schid asm ("1") = schid;
+	register unsigned long __fc asm ("0") = fc;
+	register unsigned long __schid asm ("1") = schid;
 	register unsigned long out asm ("2") = out_mask;
 	register unsigned long in asm ("3") = in_mask;
 	int cc;
@@ -47,10 +49,11 @@ static inline int do_siga_sync(struct subchannel_id schid,
 	return cc;
 }
 
-static inline int do_siga_input(struct subchannel_id schid, unsigned int mask)
+static inline int do_siga_input(unsigned long schid, unsigned int mask,
+				unsigned int fc)
 {
-	register unsigned long __fc asm ("0") = 1;
-	register struct subchannel_id __schid asm ("1") = schid;
+	register unsigned long __fc asm ("0") = fc;
+	register unsigned long __schid asm ("1") = schid;
 	register unsigned long __mask asm ("2") = mask;
 	int cc;
 
@@ -279,16 +282,20 @@ void qdio_init_buf_states(struct qdio_irq *irq_ptr)
 static inline int qdio_siga_sync(struct qdio_q *q, unsigned int output,
 			  unsigned int input)
 {
+	unsigned long schid = *((u32 *) &q->irq_ptr->schid);
+	unsigned int fc = QDIO_SIGA_SYNC;
 	int cc;
 
-	if (!need_siga_sync(q))
-		return 0;
-
 	DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-s:%1d", q->nr);
 	qperf_inc(q, siga_sync);
 
-	cc = do_siga_sync(q->irq_ptr->schid, output, input);
-	if (cc)
+	if (is_qebsm(q)) {
+		schid = q->irq_ptr->sch_token;
+		fc |= QDIO_SIGA_QEBSM_FLAG;
+	}
+
+	cc = do_siga_sync(schid, output, input, fc);
+	if (unlikely(cc))
 		DBF_ERROR("%4x SIGA-S:%2d", SCH_NO(q), cc);
 	return cc;
 }
@@ -301,38 +308,22 @@ static inline int qdio_siga_sync_q(struct qdio_q *q)
 		return qdio_siga_sync(q, q->mask, 0);
 }
 
-static inline int qdio_siga_sync_out(struct qdio_q *q)
-{
-	return qdio_siga_sync(q, ~0U, 0);
-}
-
-static inline int qdio_siga_sync_all(struct qdio_q *q)
-{
-	return qdio_siga_sync(q, ~0U, ~0U);
-}
-
 static int qdio_siga_output(struct qdio_q *q, unsigned int *busy_bit)
 {
-	unsigned long schid;
-	unsigned int fc = 0;
+	unsigned long schid = *((u32 *) &q->irq_ptr->schid);
+	unsigned int fc = QDIO_SIGA_WRITE;
 	u64 start_time = 0;
 	int cc;
 
-	if (q->u.out.use_enh_siga)
-		fc = 3;
-
 	if (is_qebsm(q)) {
 		schid = q->irq_ptr->sch_token;
-		fc |= 0x80;
+		fc |= QDIO_SIGA_QEBSM_FLAG;
 	}
-	else
-		schid = *((u32 *)&q->irq_ptr->schid);
-
 again:
 	cc = do_siga_output(schid, q->mask, busy_bit, fc);
 
 	/* hipersocket busy condition */
-	if (*busy_bit) {
+	if (unlikely(*busy_bit)) {
 		WARN_ON(queue_type(q) != QDIO_IQDIO_QFMT || cc != 2);
 
 		if (!start_time) {
@@ -347,32 +338,41 @@ again:
 
 static inline int qdio_siga_input(struct qdio_q *q)
 {
+	unsigned long schid = *((u32 *) &q->irq_ptr->schid);
+	unsigned int fc = QDIO_SIGA_READ;
 	int cc;
 
 	DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-r:%1d", q->nr);
 	qperf_inc(q, siga_read);
 
-	cc = do_siga_input(q->irq_ptr->schid, q->mask);
-	if (cc)
+	if (is_qebsm(q)) {
+		schid = q->irq_ptr->sch_token;
+		fc |= QDIO_SIGA_QEBSM_FLAG;
+	}
+
+	cc = do_siga_input(schid, q->mask, fc);
+	if (unlikely(cc))
 		DBF_ERROR("%4x SIGA-R:%2d", SCH_NO(q), cc);
 	return cc;
 }
 
-static inline void qdio_sync_after_thinint(struct qdio_q *q)
+#define qdio_siga_sync_out(q) qdio_siga_sync(q, ~0U, 0)
+#define qdio_siga_sync_all(q) qdio_siga_sync(q, ~0U, ~0U)
+
+static inline void qdio_sync_queues(struct qdio_q *q)
 {
-	if (pci_out_supported(q)) {
-		if (need_siga_sync_thinint(q))
-			qdio_siga_sync_all(q);
-		else if (need_siga_sync_out_thinint(q))
-			qdio_siga_sync_out(q);
-	} else
+	/* PCI capable outbound queues will also be scanned so sync them too */
+	if (pci_out_supported(q))
+		qdio_siga_sync_all(q);
+	else
 		qdio_siga_sync_q(q);
 }
 
 int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr,
 			unsigned char *state)
 {
-	qdio_siga_sync_q(q);
+	if (need_siga_sync(q))
+		qdio_siga_sync_q(q);
 	return get_buf_states(q, bufnr, state, 1, 0);
 }
 
@@ -549,7 +549,8 @@ static inline int qdio_inbound_q_done(struct qdio_q *q)
 	if (!atomic_read(&q->nr_buf_used))
 		return 1;
 
-	qdio_siga_sync_q(q);
+	if (need_siga_sync(q))
+		qdio_siga_sync_q(q);
 	get_buf_state(q, q->first_to_check, &state, 0);
 
 	if (state == SLSB_P_INPUT_PRIMED || state == SLSB_P_INPUT_ERROR)
@@ -644,9 +645,12 @@ static int get_outbound_buffer_frontier(struct qdio_q *q)
 	int count, stop;
 	unsigned char state;
 
-	if (((queue_type(q) != QDIO_IQDIO_QFMT) && !pci_out_supported(q)) ||
-	    (queue_type(q) == QDIO_IQDIO_QFMT && multicast_outbound(q)))
-		qdio_siga_sync_q(q);
+	if (need_siga_sync(q))
+		if (((queue_type(q) != QDIO_IQDIO_QFMT) &&
+		    !pci_out_supported(q)) ||
+		    (queue_type(q) == QDIO_IQDIO_QFMT &&
+		    multicast_outbound(q)))
+			qdio_siga_sync_q(q);
 
 	/*
 	 * Don't check 128 buffers, as otherwise qdio_inbound_q_moved
@@ -818,7 +822,8 @@ static inline void qdio_check_outbound_after_thinint(struct qdio_q *q)
 static void __tiqdio_inbound_processing(struct qdio_q *q)
 {
 	qperf_inc(q, tasklet_inbound);
-	qdio_sync_after_thinint(q);
+	if (need_siga_sync(q) && need_siga_sync_after_ai(q))
+		qdio_sync_queues(q);
 
 	/*
 	 * The interrupt could be caused by a PCI request. Check the
@@ -898,16 +903,14 @@ static void qdio_int_handler_pci(struct qdio_irq *irq_ptr)
 			tasklet_schedule(&q->tasklet);
 	}
 
-	if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED))
+	if (!pci_out_supported(q))
 		return;
 
 	for_each_output_queue(irq_ptr, q, i) {
 		if (qdio_outbound_q_done(q))
 			continue;
-
-		if (!siga_syncs_out_pci(q))
+		if (need_siga_sync(q) && need_siga_sync_out_after_pci(q))
 			qdio_siga_sync_q(q);
-
 		tasklet_schedule(&q->tasklet);
 	}
 }
@@ -970,6 +973,7 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 		return;
 	}
 
+	kstat_cpu(smp_processor_id()).irqs[IOINT_QDI]++;
 	if (irq_ptr->perf_stat_enabled)
 		irq_ptr->perf_stat.qdio_int++;
 
@@ -1273,7 +1277,6 @@ int qdio_establish(struct qdio_initialize *init_data)
 	}
 
 	qdio_setup_ssqd_info(irq_ptr);
-	DBF_EVENT("qDmmwc:%2x", irq_ptr->ssqd_desc.mmwc);
 	DBF_EVENT("qib ac:%4x", irq_ptr->qib.ac);
 
 	/* qebsm is now setup if available, initialize buffer states */
@@ -1445,52 +1448,38 @@ static int handle_outbound(struct qdio_q *q, unsigned int callflags,
 	used = atomic_add_return(count, &q->nr_buf_used);
 	BUG_ON(used > QDIO_MAX_BUFFERS_PER_Q);
 
+	if (used == QDIO_MAX_BUFFERS_PER_Q)
+		qperf_inc(q, outbound_queue_full);
+
 	if (callflags & QDIO_FLAG_PCI_OUT) {
 		q->u.out.pci_out_enabled = 1;
 		qperf_inc(q, pci_request_int);
-	}
-	else
+	} else
 		q->u.out.pci_out_enabled = 0;
 
 	if (queue_type(q) == QDIO_IQDIO_QFMT) {
-		if (multicast_outbound(q))
+		/* One SIGA-W per buffer required for unicast HiperSockets. */
+		WARN_ON_ONCE(count > 1 && !multicast_outbound(q));
+
+		rc = qdio_kick_outbound_q(q);
+	} else if (need_siga_sync(q)) {
+		rc = qdio_siga_sync_q(q);
+	} else {
+		/* try to fast requeue buffers */
+		get_buf_state(q, prev_buf(bufnr), &state, 0);
+		if (state != SLSB_CU_OUTPUT_PRIMED)
 			rc = qdio_kick_outbound_q(q);
 		else
-			if ((q->irq_ptr->ssqd_desc.mmwc > 1) &&
-			    (count > 1) &&
-			    (count <= q->irq_ptr->ssqd_desc.mmwc)) {
-				/* exploit enhanced SIGA */
-				q->u.out.use_enh_siga = 1;
-				rc = qdio_kick_outbound_q(q);
-			} else {
-				/*
-				* One siga-w per buffer required for unicast
-				* HiperSockets.
-				*/
-				q->u.out.use_enh_siga = 0;
-				while (count--) {
-					rc = qdio_kick_outbound_q(q);
-					if (rc)
-						goto out;
-				}
-			}
-		goto out;
-	}
-
-	if (need_siga_sync(q)) {
-		qdio_siga_sync_q(q);
-		goto out;
+			qperf_inc(q, fast_requeue);
 	}
 
-	/* try to fast requeue buffers */
-	get_buf_state(q, prev_buf(bufnr), &state, 0);
-	if (state != SLSB_CU_OUTPUT_PRIMED)
-		rc = qdio_kick_outbound_q(q);
+	/* in case of SIGA errors we must process the error immediately */
+	if (used >= q->u.out.scan_threshold || rc)
+		tasklet_schedule(&q->tasklet);
 	else
-		qperf_inc(q, fast_requeue);
-
-out:
-	tasklet_schedule(&q->tasklet);
+		/* free the SBALs in case of no further traffic */
+		if (!timer_pending(&q->u.out.timer))
+			mod_timer(&q->u.out.timer, jiffies + HZ);
 	return rc;
 }
 
@@ -1550,7 +1539,7 @@ int qdio_start_irq(struct ccw_device *cdev, int nr)
 
 	WARN_ON(queue_irqs_enabled(q));
 
-	if (!shared_ind(q->irq_ptr))
+	if (!shared_ind(q->irq_ptr->dsci))
 		xchg(q->irq_ptr->dsci, 0);
 
 	qdio_stop_polling(q);
@@ -1560,7 +1549,7 @@ int qdio_start_irq(struct ccw_device *cdev, int nr)
 	 * We need to check again to not lose initiative after
 	 * resetting the ACK state.
 	 */
-	if (!shared_ind(q->irq_ptr) && *q->irq_ptr->dsci)
+	if (!shared_ind(q->irq_ptr->dsci) && *q->irq_ptr->dsci)
 		goto rescan;
 	if (!qdio_inbound_q_done(q))
 		goto rescan;
@@ -1600,12 +1589,14 @@ int qdio_get_next_buffers(struct ccw_device *cdev, int nr, int *bufnr,
 	q = irq_ptr->input_qs[nr];
 	WARN_ON(queue_irqs_enabled(q));
 
-	qdio_sync_after_thinint(q);
-
 	/*
-	 * The interrupt could be caused by a PCI request. Check the
-	 * PCI capable outbound queues.
+	 * Cannot rely on automatic sync after interrupt since queues may
+	 * also be examined without interrupt.
 	 */
+	if (need_siga_sync(q))
+		qdio_sync_queues(q);
+
+	/* check the PCI capable outbound queues. */
 	qdio_check_outbound_after_thinint(q);
 
 	if (!qdio_inbound_q_moved(q))
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index a13cf7ec64b..89107d0938c 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -178,6 +178,7 @@ static void setup_queues(struct qdio_irq *irq_ptr,
 		setup_queues_misc(q, irq_ptr, qdio_init->output_handler, i);
 
 		q->is_input_q = 0;
+		q->u.out.scan_threshold = qdio_init->scan_threshold;
 		setup_storage_lists(q, irq_ptr, output_sbal_array, i);
 		output_sbal_array += QDIO_MAX_BUFFERS_PER_Q;
 
@@ -196,14 +197,10 @@ static void process_ac_flags(struct qdio_irq *irq_ptr, unsigned char qdioac)
 		irq_ptr->siga_flag.output = 1;
 	if (qdioac & AC1_SIGA_SYNC_NEEDED)
 		irq_ptr->siga_flag.sync = 1;
-	if (qdioac & AC1_AUTOMATIC_SYNC_ON_THININT)
-		irq_ptr->siga_flag.no_sync_ti = 1;
-	if (qdioac & AC1_AUTOMATIC_SYNC_ON_OUT_PCI)
-		irq_ptr->siga_flag.no_sync_out_pci = 1;
-
-	if (irq_ptr->siga_flag.no_sync_out_pci &&
-	    irq_ptr->siga_flag.no_sync_ti)
-		irq_ptr->siga_flag.no_sync_out_ti = 1;
+	if (!(qdioac & AC1_AUTOMATIC_SYNC_ON_THININT))
+		irq_ptr->siga_flag.sync_after_ai = 1;
+	if (!(qdioac & AC1_AUTOMATIC_SYNC_ON_OUT_PCI))
+		irq_ptr->siga_flag.sync_out_after_pci = 1;
 }
 
 static void check_and_setup_qebsm(struct qdio_irq *irq_ptr,
@@ -451,7 +448,7 @@ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
 	char s[80];
 
 	snprintf(s, 80, "qdio: %s %s on SC %x using "
-		 "AI:%d QEBSM:%d PCI:%d TDD:%d SIGA:%s%s%s%s%s%s\n",
+		 "AI:%d QEBSM:%d PCI:%d TDD:%d SIGA:%s%s%s%s%s\n",
 		 dev_name(&cdev->dev),
 		 (irq_ptr->qib.qfmt == QDIO_QETH_QFMT) ? "OSA" :
 			((irq_ptr->qib.qfmt == QDIO_ZFCP_QFMT) ? "ZFCP" : "HS"),
@@ -463,9 +460,8 @@ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
 		 (irq_ptr->siga_flag.input) ? "R" : " ",
 		 (irq_ptr->siga_flag.output) ? "W" : " ",
 		 (irq_ptr->siga_flag.sync) ? "S" : " ",
-		 (!irq_ptr->siga_flag.no_sync_ti) ? "A" : " ",
-		 (!irq_ptr->siga_flag.no_sync_out_ti) ? "O" : " ",
-		 (!irq_ptr->siga_flag.no_sync_out_pci) ? "P" : " ");
+		 (irq_ptr->siga_flag.sync_after_ai) ? "A" : " ",
+		 (irq_ptr->siga_flag.sync_out_after_pci) ? "P" : " ");
 	printk(KERN_INFO "%s", s);
 }
 
diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c
index 752dbee06af..5c4e741d822 100644
--- a/drivers/s390/cio/qdio_thinint.c
+++ b/drivers/s390/cio/qdio_thinint.c
@@ -8,6 +8,7 @@
  */
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/kernel_stat.h>
 #include <asm/atomic.h>
 #include <asm/debug.h>
 #include <asm/qdio.h>
@@ -35,22 +36,8 @@ static u8 *tiqdio_alsi;
 
 struct indicator_t *q_indicators;
 
-static int css_qdio_omit_svs;
-
 static u64 last_ai_time;
 
-static inline unsigned long do_clear_global_summary(void)
-{
-	register unsigned long __fn asm("1") = 3;
-	register unsigned long __tmp asm("2");
-	register unsigned long __time asm("3");
-
-	asm volatile(
-		"	.insn	rre,0xb2650000,2,0"
-		: "+d" (__fn), "=d" (__tmp), "=d" (__time));
-	return __time;
-}
-
 /* returns addr for the device state change indicator */
 static u32 *get_indicator(void)
 {
@@ -83,10 +70,6 @@ void tiqdio_add_input_queues(struct qdio_irq *irq_ptr)
 	struct qdio_q *q;
 	int i;
 
-	/* No TDD facility? If we must use SIGA-s we can also omit SVS. */
-	if (!css_qdio_omit_svs && irq_ptr->siga_flag.sync)
-		css_qdio_omit_svs = 1;
-
 	mutex_lock(&tiq_list_lock);
 	for_each_input_queue(irq_ptr, q, i)
 		list_add_rcu(&q->entry, &tiq_list);
@@ -112,9 +95,9 @@ void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr)
 	}
 }
 
-static inline int shared_ind_used(void)
+static inline u32 shared_ind_set(void)
 {
-	return atomic_read(&q_indicators[TIQDIO_SHARED_IND].count);
+	return q_indicators[TIQDIO_SHARED_IND].ind;
 }
 
 /**
@@ -124,20 +107,11 @@ static inline int shared_ind_used(void)
  */
 static void tiqdio_thinint_handler(void *alsi, void *data)
 {
+	u32 si_used = shared_ind_set();
 	struct qdio_q *q;
 
 	last_ai_time = S390_lowcore.int_clock;
-
-	/*
-	 * SVS only when needed: issue SVS to benefit from iqdio interrupt
-	 * avoidance (SVS clears adapter interrupt suppression overwrite).
-	 */
-	if (!css_qdio_omit_svs)
-		do_clear_global_summary();
-
-	/* reset local summary indicator */
-	if (shared_ind_used())
-		xchg(tiqdio_alsi, 0);
+	kstat_cpu(smp_processor_id()).irqs[IOINT_QAI]++;
 
 	/* protect tiq_list entries, only changed in activate or shutdown */
 	rcu_read_lock();
@@ -146,7 +120,10 @@ static void tiqdio_thinint_handler(void *alsi, void *data)
 	list_for_each_entry_rcu(q, &tiq_list, entry) {
 
 		/* only process queues from changed sets */
-		if (!*q->irq_ptr->dsci)
+		if (unlikely(shared_ind(q->irq_ptr->dsci))) {
+			if (!si_used)
+				continue;
+		} else if (!*q->irq_ptr->dsci)
 			continue;
 
 		if (q->u.in.queue_start_poll) {
@@ -162,7 +139,7 @@ static void tiqdio_thinint_handler(void *alsi, void *data)
 						 q->irq_ptr->int_parm);
 		} else {
 			/* only clear it if the indicator is non-shared */
-			if (!shared_ind(q->irq_ptr))
+			if (!shared_ind(q->irq_ptr->dsci))
 				xchg(q->irq_ptr->dsci, 0);
 			/*
 			 * Call inbound processing but not directly
@@ -178,13 +155,8 @@ static void tiqdio_thinint_handler(void *alsi, void *data)
 	 * If the shared indicator was used clear it now after all queues
 	 * were processed.
 	 */
-	if (shared_ind_used()) {
+	if (si_used && shared_ind_set())
 		xchg(&q_indicators[TIQDIO_SHARED_IND].ind, 0);
-
-		/* prevent racing */
-		if (*tiqdio_alsi)
-			xchg(&q_indicators[TIQDIO_SHARED_IND].ind, 1 << 7);
-	}
 }
 
 static int set_subchannel_ind(struct qdio_irq *irq_ptr, int reset)
@@ -269,12 +241,6 @@ int qdio_establish_thinint(struct qdio_irq *irq_ptr)
 {
 	if (!is_thinint_irq(irq_ptr))
 		return 0;
-
-	/* Check for aif time delay disablement. If installed,
-	 * omit SVS even under LPAR
-	 */
-	if (css_general_characteristics.aif_tdd)
-		css_qdio_omit_svs = 1;
 	return set_subchannel_ind(irq_ptr, 0);
 }
 
@@ -292,8 +258,8 @@ void qdio_shutdown_thinint(struct qdio_irq *irq_ptr)
 		return;
 
 	/* reset adapter interrupt indicators */
-	put_indicator(irq_ptr->dsci);
 	set_subchannel_ind(irq_ptr, 1);
+	put_indicator(irq_ptr->dsci);
 }
 
 void __exit tiqdio_unregister_thinints(void)
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 8fd8c62455e..67302b944ab 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -27,6 +27,7 @@
 #define KMSG_COMPONENT "ap"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -154,7 +155,7 @@ static inline int ap_instructions_available(void)
  */
 static int ap_interrupts_available(void)
 {
-	return test_facility(1) && test_facility(2);
+	return test_facility(2) && test_facility(65);
 }
 
 /**
@@ -221,6 +222,69 @@ ap_queue_interruption_control(ap_qid_t qid, void *ind)
 }
 #endif
 
+static inline struct ap_queue_status __ap_4096_commands_available(ap_qid_t qid,
+								  int *support)
+{
+	register unsigned long reg0 asm ("0") = 0UL | qid | (1UL << 23);
+	register struct ap_queue_status reg1 asm ("1");
+	register unsigned long reg2 asm ("2") = 0UL;
+
+	asm volatile(
+		".long 0xb2af0000\n"
+		"0: la    %1,0\n"
+		"1:\n"
+		EX_TABLE(0b, 1b)
+		: "+d" (reg0), "=d" (reg1), "=d" (reg2)
+		:
+		: "cc");
+
+	if (reg2 & 0x6000000000000000ULL)
+		*support = 1;
+	else
+		*support = 0;
+
+	return reg1;
+}
+
+/**
+ * ap_4096_commands_availablen(): Check for availability of 4096 bit RSA
+ * support.
+ * @qid: The AP queue number
+ *
+ * Returns 1 if 4096 bit RSA keys are support fo the AP, returns 0 if not.
+ */
+int ap_4096_commands_available(ap_qid_t qid)
+{
+	struct ap_queue_status status;
+	int i, support = 0;
+	status = __ap_4096_commands_available(qid, &support);
+
+	for (i = 0; i < AP_MAX_RESET; i++) {
+		switch (status.response_code) {
+		case AP_RESPONSE_NORMAL:
+			return support;
+		case AP_RESPONSE_RESET_IN_PROGRESS:
+		case AP_RESPONSE_BUSY:
+			break;
+		case AP_RESPONSE_Q_NOT_AVAIL:
+		case AP_RESPONSE_DECONFIGURED:
+		case AP_RESPONSE_CHECKSTOPPED:
+		case AP_RESPONSE_INVALID_ADDRESS:
+			return 0;
+		case AP_RESPONSE_OTHERWISE_CHANGED:
+			break;
+		default:
+			break;
+		}
+		if (i < AP_MAX_RESET - 1) {
+			udelay(5);
+			status = __ap_4096_commands_available(qid, &support);
+		}
+	}
+	return support;
+}
+EXPORT_SYMBOL(ap_4096_commands_available);
+
 /**
  * ap_queue_enable_interruption(): Enable interruption on an AP.
  * @qid: The AP queue number
@@ -1042,6 +1106,7 @@ out:
 
 static void ap_interrupt_handler(void *unused1, void *unused2)
 {
+	kstat_cpu(smp_processor_id()).irqs[IOINT_APB]++;
 	tasklet_schedule(&ap_tasklet);
 }
 
diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h
index 4785d07cd44..08b9738285b 100644
--- a/drivers/s390/crypto/ap_bus.h
+++ b/drivers/s390/crypto/ap_bus.h
@@ -196,4 +196,6 @@ void ap_flush_queue(struct ap_device *ap_dev);
 int ap_module_init(void);
 void ap_module_exit(void);
 
+int ap_4096_commands_available(ap_qid_t qid);
+
 #endif /* _AP_BUS_H_ */
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index f5221749d18..8e65447f76b 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -35,7 +35,6 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/compat.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <asm/atomic.h>
 #include <asm/uaccess.h>
@@ -397,8 +396,15 @@ static long zcrypt_rsa_crt(struct ica_rsa_modexpo_crt *crt)
 			if (copied == 0) {
 				unsigned int len;
 				spin_unlock_bh(&zcrypt_device_lock);
-				/* len is max 256 / 2 - 120 = 8 */
-				len = crt->inputdatalength / 2 - 120;
+				/* len is max 256 / 2 - 120 = 8
+				 * For bigger device just assume len of leading
+				 * 0s is 8 as stated in the requirements for
+				 * ica_rsa_modexpo_crt struct in zcrypt.h.
+				 */
+				if (crt->inputdatalength <= 256)
+					len = crt->inputdatalength / 2 - 120;
+				else
+					len = 8;
 				if (len > sizeof(z1))
 					return -EFAULT;
 				z1 = z2 = z3 = 0;
@@ -406,6 +412,7 @@ static long zcrypt_rsa_crt(struct ica_rsa_modexpo_crt *crt)
 				    copy_from_user(&z2, crt->bp_key, len) ||
 				    copy_from_user(&z3, crt->u_mult_inv, len))
 					return -EFAULT;
+				z1 = z2 = z3 = 0;
 				copied = 1;
 				/*
 				 * We have to restart device lookup -
diff --git a/drivers/s390/crypto/zcrypt_api.h b/drivers/s390/crypto/zcrypt_api.h
index 8e7ffbf2466..88ebd114735 100644
--- a/drivers/s390/crypto/zcrypt_api.h
+++ b/drivers/s390/crypto/zcrypt_api.h
@@ -109,6 +109,7 @@ struct zcrypt_device {
 	int request_count;		/* # current requests. */
 
 	struct ap_message reply;	/* Per-device reply structure. */
+	int max_exp_bit_length;
 };
 
 struct zcrypt_device *zcrypt_device_alloc(size_t);
diff --git a/drivers/s390/crypto/zcrypt_cex2a.c b/drivers/s390/crypto/zcrypt_cex2a.c
index 9c409efa1ec..2176d00b395 100644
--- a/drivers/s390/crypto/zcrypt_cex2a.c
+++ b/drivers/s390/crypto/zcrypt_cex2a.c
@@ -41,7 +41,7 @@
 #define CEX2A_MIN_MOD_SIZE	  1	/*    8 bits	*/
 #define CEX2A_MAX_MOD_SIZE	256	/* 2048 bits	*/
 #define CEX3A_MIN_MOD_SIZE	CEX2A_MIN_MOD_SIZE
-#define CEX3A_MAX_MOD_SIZE	CEX2A_MAX_MOD_SIZE
+#define CEX3A_MAX_MOD_SIZE	512	/* 4096 bits	*/
 
 #define CEX2A_SPEED_RATING	970
 #define CEX3A_SPEED_RATING	900 /* Fixme: Needs finetuning */
@@ -49,8 +49,10 @@
 #define CEX2A_MAX_MESSAGE_SIZE	0x390	/* sizeof(struct type50_crb2_msg)    */
 #define CEX2A_MAX_RESPONSE_SIZE 0x110	/* max outputdatalength + type80_hdr */
 
-#define CEX3A_MAX_MESSAGE_SIZE	CEX2A_MAX_MESSAGE_SIZE
-#define CEX3A_MAX_RESPONSE_SIZE	CEX2A_MAX_RESPONSE_SIZE
+#define CEX3A_MAX_RESPONSE_SIZE	0x210	/* 512 bit modulus
+					 * (max outputdatalength) +
+					 * type80_hdr*/
+#define CEX3A_MAX_MESSAGE_SIZE	sizeof(struct type50_crb3_msg)
 
 #define CEX2A_CLEANUP_TIME	(15*HZ)
 #define CEX3A_CLEANUP_TIME	CEX2A_CLEANUP_TIME
@@ -110,7 +112,7 @@ static int ICAMEX_msg_to_type50MEX_msg(struct zcrypt_device *zdev,
 		mod = meb1->modulus + sizeof(meb1->modulus) - mod_len;
 		exp = meb1->exponent + sizeof(meb1->exponent) - mod_len;
 		inp = meb1->message + sizeof(meb1->message) - mod_len;
-	} else {
+	} else if (mod_len <= 256) {
 		struct type50_meb2_msg *meb2 = ap_msg->message;
 		memset(meb2, 0, sizeof(*meb2));
 		ap_msg->length = sizeof(*meb2);
@@ -120,6 +122,17 @@ static int ICAMEX_msg_to_type50MEX_msg(struct zcrypt_device *zdev,
 		mod = meb2->modulus + sizeof(meb2->modulus) - mod_len;
 		exp = meb2->exponent + sizeof(meb2->exponent) - mod_len;
 		inp = meb2->message + sizeof(meb2->message) - mod_len;
+	} else {
+		/* mod_len > 256 = 4096 bit RSA Key */
+		struct type50_meb3_msg *meb3 = ap_msg->message;
+		memset(meb3, 0, sizeof(*meb3));
+		ap_msg->length = sizeof(*meb3);
+		meb3->header.msg_type_code = TYPE50_TYPE_CODE;
+		meb3->header.msg_len = sizeof(*meb3);
+		meb3->keyblock_type = TYPE50_MEB3_FMT;
+		mod = meb3->modulus + sizeof(meb3->modulus) - mod_len;
+		exp = meb3->exponent + sizeof(meb3->exponent) - mod_len;
+		inp = meb3->message + sizeof(meb3->message) - mod_len;
 	}
 
 	if (copy_from_user(mod, mex->n_modulus, mod_len) ||
@@ -142,7 +155,7 @@ static int ICACRT_msg_to_type50CRT_msg(struct zcrypt_device *zdev,
 				       struct ap_message *ap_msg,
 				       struct ica_rsa_modexpo_crt *crt)
 {
-	int mod_len, short_len, long_len, long_offset;
+	int mod_len, short_len, long_len, long_offset, limit;
 	unsigned char *p, *q, *dp, *dq, *u, *inp;
 
 	mod_len = crt->inputdatalength;
@@ -152,14 +165,20 @@ static int ICACRT_msg_to_type50CRT_msg(struct zcrypt_device *zdev,
 	/*
 	 * CEX2A cannot handle p, dp, or U > 128 bytes.
 	 * If we have one of these, we need to do extra checking.
+	 * For CEX3A the limit is 256 bytes.
 	 */
-	if (long_len > 128) {
+	if (zdev->max_mod_size == CEX3A_MAX_MOD_SIZE)
+		limit = 256;
+	else
+		limit = 128;
+
+	if (long_len > limit) {
 		/*
 		 * zcrypt_rsa_crt already checked for the leading
 		 * zeroes of np_prime, bp_key and u_mult_inc.
 		 */
-		long_offset = long_len - 128;
-		long_len = 128;
+		long_offset = long_len - limit;
+		long_len = limit;
 	} else
 		long_offset = 0;
 
@@ -180,7 +199,7 @@ static int ICACRT_msg_to_type50CRT_msg(struct zcrypt_device *zdev,
 		dq = crb1->dq + sizeof(crb1->dq) - short_len;
 		u = crb1->u + sizeof(crb1->u) - long_len;
 		inp = crb1->message + sizeof(crb1->message) - mod_len;
-	} else {
+	} else if (long_len <= 128) {
 		struct type50_crb2_msg *crb2 = ap_msg->message;
 		memset(crb2, 0, sizeof(*crb2));
 		ap_msg->length = sizeof(*crb2);
@@ -193,6 +212,20 @@ static int ICACRT_msg_to_type50CRT_msg(struct zcrypt_device *zdev,
 		dq = crb2->dq + sizeof(crb2->dq) - short_len;
 		u = crb2->u + sizeof(crb2->u) - long_len;
 		inp = crb2->message + sizeof(crb2->message) - mod_len;
+	} else {
+		/* long_len >= 256 */
+		struct type50_crb3_msg *crb3 = ap_msg->message;
+		memset(crb3, 0, sizeof(*crb3));
+		ap_msg->length = sizeof(*crb3);
+		crb3->header.msg_type_code = TYPE50_TYPE_CODE;
+		crb3->header.msg_len = sizeof(*crb3);
+		crb3->keyblock_type = TYPE50_CRB3_FMT;
+		p = crb3->p + sizeof(crb3->p) - long_len;
+		q = crb3->q + sizeof(crb3->q) - short_len;
+		dp = crb3->dp + sizeof(crb3->dp) - long_len;
+		dq = crb3->dq + sizeof(crb3->dq) - short_len;
+		u = crb3->u + sizeof(crb3->u) - long_len;
+		inp = crb3->message + sizeof(crb3->message) - mod_len;
 	}
 
 	if (copy_from_user(p, crt->np_prime + long_offset, long_len) ||
@@ -203,7 +236,6 @@ static int ICACRT_msg_to_type50CRT_msg(struct zcrypt_device *zdev,
 	    copy_from_user(inp, crt->inputdata, mod_len))
 		return -EFAULT;
 
-
 	return 0;
 }
 
@@ -230,7 +262,10 @@ static int convert_type80(struct zcrypt_device *zdev,
 		zdev->online = 0;
 		return -EAGAIN;	/* repeat the request on a different device. */
 	}
-	BUG_ON(t80h->len > CEX2A_MAX_RESPONSE_SIZE);
+	if (zdev->user_space_type == ZCRYPT_CEX2A)
+		BUG_ON(t80h->len > CEX2A_MAX_RESPONSE_SIZE);
+	else
+		BUG_ON(t80h->len > CEX3A_MAX_RESPONSE_SIZE);
 	data = reply->message + t80h->len - outputdatalength;
 	if (copy_to_user(outputdata, data, outputdatalength))
 		return -EFAULT;
@@ -282,7 +317,10 @@ static void zcrypt_cex2a_receive(struct ap_device *ap_dev,
 	}
 	t80h = reply->message;
 	if (t80h->type == TYPE80_RSP_CODE) {
-		length = min(CEX2A_MAX_RESPONSE_SIZE, (int) t80h->len);
+		if (ap_dev->device_type == AP_DEVICE_TYPE_CEX2A)
+			length = min(CEX2A_MAX_RESPONSE_SIZE, (int) t80h->len);
+		else
+			length = min(CEX3A_MAX_RESPONSE_SIZE, (int) t80h->len);
 		memcpy(msg->message, reply->message, length);
 	} else
 		memcpy(msg->message, reply->message, sizeof error_reply);
@@ -307,7 +345,10 @@ static long zcrypt_cex2a_modexpo(struct zcrypt_device *zdev,
 	int rc;
 
 	ap_init_message(&ap_msg);
-	ap_msg.message = kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
+	if (zdev->user_space_type == ZCRYPT_CEX2A)
+		ap_msg.message = kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
+	else
+		ap_msg.message = kmalloc(CEX3A_MAX_MESSAGE_SIZE, GFP_KERNEL);
 	if (!ap_msg.message)
 		return -ENOMEM;
 	ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
@@ -345,7 +386,10 @@ static long zcrypt_cex2a_modexpo_crt(struct zcrypt_device *zdev,
 	int rc;
 
 	ap_init_message(&ap_msg);
-	ap_msg.message = kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
+	if (zdev->user_space_type == ZCRYPT_CEX2A)
+		ap_msg.message = kmalloc(CEX2A_MAX_MESSAGE_SIZE, GFP_KERNEL);
+	else
+		ap_msg.message = kmalloc(CEX3A_MAX_MESSAGE_SIZE, GFP_KERNEL);
 	if (!ap_msg.message)
 		return -ENOMEM;
 	ap_msg.psmid = (((unsigned long long) current->pid) << 32) +
@@ -397,6 +441,7 @@ static int zcrypt_cex2a_probe(struct ap_device *ap_dev)
 		zdev->max_mod_size = CEX2A_MAX_MOD_SIZE;
 		zdev->short_crt = 1;
 		zdev->speed_rating = CEX2A_SPEED_RATING;
+		zdev->max_exp_bit_length = CEX2A_MAX_MOD_SIZE;
 		break;
 	case AP_DEVICE_TYPE_CEX3A:
 		zdev = zcrypt_device_alloc(CEX3A_MAX_RESPONSE_SIZE);
@@ -404,8 +449,13 @@ static int zcrypt_cex2a_probe(struct ap_device *ap_dev)
 			return -ENOMEM;
 		zdev->user_space_type = ZCRYPT_CEX3A;
 		zdev->type_string = "CEX3A";
-		zdev->min_mod_size = CEX3A_MIN_MOD_SIZE;
-		zdev->max_mod_size = CEX3A_MAX_MOD_SIZE;
+		zdev->min_mod_size = CEX2A_MIN_MOD_SIZE;
+		zdev->max_mod_size = CEX2A_MAX_MOD_SIZE;
+		zdev->max_exp_bit_length = CEX2A_MAX_MOD_SIZE;
+		if (ap_4096_commands_available(ap_dev->qid)) {
+			zdev->max_mod_size = CEX3A_MAX_MOD_SIZE;
+			zdev->max_exp_bit_length = CEX3A_MAX_MOD_SIZE;
+		}
 		zdev->short_crt = 1;
 		zdev->speed_rating = CEX3A_SPEED_RATING;
 		break;
diff --git a/drivers/s390/crypto/zcrypt_cex2a.h b/drivers/s390/crypto/zcrypt_cex2a.h
index 8f69d1dacab..0350665810c 100644
--- a/drivers/s390/crypto/zcrypt_cex2a.h
+++ b/drivers/s390/crypto/zcrypt_cex2a.h
@@ -51,8 +51,10 @@ struct type50_hdr {
 
 #define TYPE50_MEB1_FMT		0x0001
 #define TYPE50_MEB2_FMT		0x0002
+#define TYPE50_MEB3_FMT		0x0003
 #define TYPE50_CRB1_FMT		0x0011
 #define TYPE50_CRB2_FMT		0x0012
+#define TYPE50_CRB3_FMT		0x0013
 
 /* Mod-Exp, with a small modulus */
 struct type50_meb1_msg {
@@ -74,6 +76,16 @@ struct type50_meb2_msg {
 	unsigned char	message[256];
 } __attribute__((packed));
 
+/* Mod-Exp, with a larger modulus */
+struct type50_meb3_msg {
+	struct type50_hdr header;
+	unsigned short	keyblock_type;	/* 0x0003 */
+	unsigned char	reserved[6];
+	unsigned char	exponent[512];
+	unsigned char	modulus[512];
+	unsigned char	message[512];
+} __attribute__((packed));
+
 /* CRT, with a small modulus */
 struct type50_crb1_msg {
 	struct type50_hdr header;
@@ -100,6 +112,19 @@ struct type50_crb2_msg {
 	unsigned char	message[256];
 } __attribute__((packed));
 
+/* CRT, with a larger modulus */
+struct type50_crb3_msg {
+	struct type50_hdr header;
+	unsigned short	keyblock_type;	/* 0x0013 */
+	unsigned char	reserved[6];
+	unsigned char	p[256];
+	unsigned char	q[256];
+	unsigned char	dp[256];
+	unsigned char	dq[256];
+	unsigned char	u[256];
+	unsigned char	message[512];
+} __attribute__((packed));
+
 /**
  * The type 80 response family is associated with a CEX2A card.
  *
diff --git a/drivers/s390/crypto/zcrypt_pcica.c b/drivers/s390/crypto/zcrypt_pcica.c
index 09e934b295a..1afb69c75fe 100644
--- a/drivers/s390/crypto/zcrypt_pcica.c
+++ b/drivers/s390/crypto/zcrypt_pcica.c
@@ -373,6 +373,7 @@ static int zcrypt_pcica_probe(struct ap_device *ap_dev)
 	zdev->min_mod_size = PCICA_MIN_MOD_SIZE;
 	zdev->max_mod_size = PCICA_MAX_MOD_SIZE;
 	zdev->speed_rating = PCICA_SPEED_RATING;
+	zdev->max_exp_bit_length = PCICA_MAX_MOD_SIZE;
 	ap_dev->reply = &zdev->reply;
 	ap_dev->private = zdev;
 	rc = zcrypt_device_register(zdev);
diff --git a/drivers/s390/crypto/zcrypt_pcicc.c b/drivers/s390/crypto/zcrypt_pcicc.c
index 9dec5c77cff..aa4c050a569 100644
--- a/drivers/s390/crypto/zcrypt_pcicc.c
+++ b/drivers/s390/crypto/zcrypt_pcicc.c
@@ -579,6 +579,7 @@ static int zcrypt_pcicc_probe(struct ap_device *ap_dev)
 	zdev->min_mod_size = PCICC_MIN_MOD_SIZE;
 	zdev->max_mod_size = PCICC_MAX_MOD_SIZE;
 	zdev->speed_rating = PCICC_SPEED_RATING;
+	zdev->max_exp_bit_length = PCICC_MAX_MOD_SIZE;
 	ap_dev->reply = &zdev->reply;
 	ap_dev->private = zdev;
 	rc = zcrypt_device_register(zdev);
diff --git a/drivers/s390/crypto/zcrypt_pcixcc.c b/drivers/s390/crypto/zcrypt_pcixcc.c
index 510fab4577d..4f85eb725f4 100644
--- a/drivers/s390/crypto/zcrypt_pcixcc.c
+++ b/drivers/s390/crypto/zcrypt_pcixcc.c
@@ -45,12 +45,12 @@
 #define PCIXCC_MIN_MOD_SIZE_OLD	 64	/*  512 bits	*/
 #define PCIXCC_MAX_MOD_SIZE	256	/* 2048 bits	*/
 #define CEX3C_MIN_MOD_SIZE	PCIXCC_MIN_MOD_SIZE
-#define CEX3C_MAX_MOD_SIZE	PCIXCC_MAX_MOD_SIZE
+#define CEX3C_MAX_MOD_SIZE	512	/* 4096 bits	*/
 
 #define PCIXCC_MCL2_SPEED_RATING	7870
 #define PCIXCC_MCL3_SPEED_RATING	7870
 #define CEX2C_SPEED_RATING		7000
-#define CEX3C_SPEED_RATING		6500	/* FIXME: needs finetuning */
+#define CEX3C_SPEED_RATING		6500
 
 #define PCIXCC_MAX_ICA_MESSAGE_SIZE 0x77c  /* max size type6 v2 crt message */
 #define PCIXCC_MAX_ICA_RESPONSE_SIZE 0x77c /* max size type86 v2 reply	    */
@@ -567,6 +567,15 @@ static int convert_response_ica(struct zcrypt_device *zdev,
 	case TYPE88_RSP_CODE:
 		return convert_error(zdev, reply);
 	case TYPE86_RSP_CODE:
+		if (msg->cprbx.ccp_rtcode &&
+		   (msg->cprbx.ccp_rscode == 0x14f) &&
+		   (outputdatalength > 256)) {
+			if (zdev->max_exp_bit_length <= 17) {
+				zdev->max_exp_bit_length = 17;
+				return -EAGAIN;
+			} else
+				return -EINVAL;
+		}
 		if (msg->hdr.reply_code)
 			return convert_error(zdev, reply);
 		if (msg->cprbx.cprb_ver_id == 0x02)
@@ -1052,11 +1061,13 @@ static int zcrypt_pcixcc_probe(struct ap_device *ap_dev)
 			zdev->speed_rating = PCIXCC_MCL2_SPEED_RATING;
 			zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE_OLD;
 			zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE;
+			zdev->max_exp_bit_length = PCIXCC_MAX_MOD_SIZE;
 		} else {
 			zdev->type_string = "PCIXCC_MCL3";
 			zdev->speed_rating = PCIXCC_MCL3_SPEED_RATING;
 			zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE;
 			zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE;
+			zdev->max_exp_bit_length = PCIXCC_MAX_MOD_SIZE;
 		}
 		break;
 	case AP_DEVICE_TYPE_CEX2C:
@@ -1065,6 +1076,7 @@ static int zcrypt_pcixcc_probe(struct ap_device *ap_dev)
 		zdev->speed_rating = CEX2C_SPEED_RATING;
 		zdev->min_mod_size = PCIXCC_MIN_MOD_SIZE;
 		zdev->max_mod_size = PCIXCC_MAX_MOD_SIZE;
+		zdev->max_exp_bit_length = PCIXCC_MAX_MOD_SIZE;
 		break;
 	case AP_DEVICE_TYPE_CEX3C:
 		zdev->user_space_type = ZCRYPT_CEX3C;
@@ -1072,6 +1084,7 @@ static int zcrypt_pcixcc_probe(struct ap_device *ap_dev)
 		zdev->speed_rating = CEX3C_SPEED_RATING;
 		zdev->min_mod_size = CEX3C_MIN_MOD_SIZE;
 		zdev->max_mod_size = CEX3C_MAX_MOD_SIZE;
+		zdev->max_exp_bit_length = CEX3C_MAX_MOD_SIZE;
 		break;
 	default:
 		goto out_free;
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 375aeeaf9ea..414427d64a8 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -10,6 +10,7 @@
  *    Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
  */
 
+#include <linux/kernel_stat.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/err.h>
@@ -25,6 +26,7 @@
 #include <asm/kvm_virtio.h>
 #include <asm/setup.h>
 #include <asm/s390_ext.h>
+#include <asm/irq.h>
 
 #define VIRTIO_SUBCODE_64 0x0D00
 
@@ -379,6 +381,7 @@ static void kvm_extint_handler(unsigned int ext_int_code,
 	u16 subcode;
 	u32 param;
 
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_VRT]++;
 	subcode = ext_int_code >> 16;
 	if ((subcode & 0xff00) != VIRTIO_SUBCODE_64)
 		return;
diff --git a/drivers/s390/net/Kconfig b/drivers/s390/net/Kconfig
index 456b1874339..fa80ba1f034 100644
--- a/drivers/s390/net/Kconfig
+++ b/drivers/s390/net/Kconfig
@@ -2,7 +2,8 @@ menu "S/390 network device drivers"
 	depends on NETDEVICES && S390
 
 config LCS
-	tristate "Lan Channel Station Interface"
+	def_tristate m
+	prompt "Lan Channel Station Interface"
 	depends on CCW && NETDEVICES && (NET_ETHERNET || TR || FDDI)
 	help
 	   Select this option if you want to use LCS networking on IBM System z.
@@ -12,7 +13,8 @@ config LCS
 	   If you do not know what it is, it's safe to choose Y.
 
 config CTCM
-	tristate "CTC and MPC SNA device support"
+	def_tristate m
+	prompt "CTC and MPC SNA device support"
 	depends on CCW && NETDEVICES
 	help
 	  Select this option if you want to use channel-to-channel
@@ -26,7 +28,8 @@ config CTCM
 	  If you do not need any channel-to-channel connection, choose N.
 
 config NETIUCV
-	tristate "IUCV network device support (VM only)"
+	def_tristate m
+	prompt "IUCV network device support (VM only)"
 	depends on IUCV && NETDEVICES
 	help
 	  Select this option if you want to use inter-user communication
@@ -37,14 +40,16 @@ config NETIUCV
 	  The module name is netiucv. If unsure, choose Y.
 
 config SMSGIUCV
-	tristate "IUCV special message support (VM only)"
+	def_tristate m
+	prompt "IUCV special message support (VM only)"
 	depends on IUCV
 	help
 	  Select this option if you want to be able to receive SMSG messages
 	  from other VM guest systems.
 
 config SMSGIUCV_EVENT
-	tristate "Deliver IUCV special messages as uevents (VM only)"
+	def_tristate m
+	prompt "Deliver IUCV special messages as uevents (VM only)"
 	depends on SMSGIUCV
 	help
 	  Select this option to deliver CP special messages (SMSGs) as
@@ -54,7 +59,8 @@ config SMSGIUCV_EVENT
 	  To compile as a module, choose M. The module name is "smsgiucv_app".
 
 config CLAW
-	tristate "CLAW device support"
+	def_tristate m
+	prompt "CLAW device support"
 	depends on CCW && NETDEVICES
 	help
 	  This driver supports channel attached CLAW devices.
@@ -64,7 +70,8 @@ config CLAW
 	  To compile into the kernel, choose Y.
 
 config QETH
-	tristate "Gigabit Ethernet device support"
+	def_tristate y
+	prompt "Gigabit Ethernet device support"
 	depends on CCW && NETDEVICES && IP_MULTICAST && QDIO
 	help
 	  This driver supports the IBM System z OSA Express adapters
@@ -78,25 +85,25 @@ config QETH
 	  The module name is qeth.
 
 config QETH_L2
-        tristate "qeth layer 2 device support"
-        depends on QETH
-        help
-          Select this option to be able to run qeth devices in layer 2 mode.
-          To compile as a module, choose M. The module name is qeth_l2.
-          If unsure, choose y.
+	def_tristate y
+	prompt "qeth layer 2 device support"
+	depends on QETH
+	help
+	  Select this option to be able to run qeth devices in layer 2 mode.
+	  To compile as a module, choose M. The module name is qeth_l2.
+	  If unsure, choose y.
 
 config QETH_L3
-        tristate "qeth layer 3 device support"
-        depends on QETH
-        help
-          Select this option to be able to run qeth devices in layer 3 mode.
-          To compile as a module choose M. The module name is qeth_l3.
-          If unsure, choose Y.
+	def_tristate y
+	prompt "qeth layer 3 device support"
+	depends on QETH
+	help
+	  Select this option to be able to run qeth devices in layer 3 mode.
+	  To compile as a module choose M. The module name is qeth_l3.
+	  If unsure, choose Y.
 
 config QETH_IPV6
-        bool
-        depends on (QETH_L3 = IPV6) || (QETH_L3 && IPV6 = 'y')
-        default y
+	def_bool y if (QETH_L3 = IPV6) || (QETH_L3 && IPV6 = 'y')
 
 config CCWGROUP
 	tristate
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index 8e4153d740f..ce3a5c13ce0 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -63,6 +63,7 @@
 
 #define KMSG_COMPONENT "claw"
 
+#include <linux/kernel_stat.h>
 #include <asm/ccwdev.h>
 #include <asm/ccwgroup.h>
 #include <asm/debug.h>
@@ -640,6 +641,7 @@ claw_irq_handler(struct ccw_device *cdev,
         struct claw_env  *p_env;
         struct chbk *p_ch_r=NULL;
 
+	kstat_cpu(smp_processor_id()).irqs[IOINT_CLW]++;
 	CLAW_DBF_TEXT(4, trace, "clawirq");
         /* Bypass all 'unsolicited interrupts' */
 	privptr = dev_get_drvdata(&cdev->dev);
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 2c7d2d9be4d..4c284598592 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -24,6 +24,7 @@
 #define KMSG_COMPONENT "ctcm"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -1204,6 +1205,7 @@ static void ctcm_irq_handler(struct ccw_device *cdev,
 	int cstat;
 	int dstat;
 
+	kstat_cpu(smp_processor_id()).irqs[IOINT_CTC]++;
 	CTCM_DBF_TEXT_(TRACE, CTC_DBF_DEBUG,
 		"Enter %s(%s)", CTCM_FUNTAIL, dev_name(&cdev->dev));
 
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 0f19d540b65..09e7a053c84 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -26,6 +26,7 @@
 #define KMSG_COMPONENT		"lcs"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/if.h>
 #include <linux/netdevice.h>
@@ -1188,7 +1189,8 @@ lcs_remove_mc_addresses(struct lcs_card *card, struct in_device *in4_dev)
 	spin_lock_irqsave(&card->ipm_lock, flags);
 	list_for_each(l, &card->ipm_list) {
 		ipm = list_entry(l, struct lcs_ipm_list, list);
-		for (im4 = in4_dev->mc_list; im4 != NULL; im4 = im4->next) {
+		for (im4 = rcu_dereference(in4_dev->mc_list);
+		     im4 != NULL; im4 = rcu_dereference(im4->next_rcu)) {
 			lcs_get_mac_for_ipm(im4->multiaddr, buf, card->dev);
 			if ( (ipm->ipm.ip_addr == im4->multiaddr) &&
 			     (memcmp(buf, &ipm->ipm.mac_addr,
@@ -1233,7 +1235,8 @@ lcs_set_mc_addresses(struct lcs_card *card, struct in_device *in4_dev)
 	unsigned long flags;
 
 	LCS_DBF_TEXT(4, trace, "setmclst");
-	for (im4 = in4_dev->mc_list; im4; im4 = im4->next) {
+	for (im4 = rcu_dereference(in4_dev->mc_list); im4 != NULL;
+	     im4 = rcu_dereference(im4->next_rcu)) {
 		lcs_get_mac_for_ipm(im4->multiaddr, buf, card->dev);
 		ipm = lcs_check_addr_entry(card, im4, buf);
 		if (ipm != NULL)
@@ -1269,10 +1272,10 @@ lcs_register_mc_addresses(void *data)
 	in4_dev = in_dev_get(card->dev);
 	if (in4_dev == NULL)
 		goto out;
-	read_lock(&in4_dev->mc_list_lock);
+	rcu_read_lock();
 	lcs_remove_mc_addresses(card,in4_dev);
 	lcs_set_mc_addresses(card, in4_dev);
-	read_unlock(&in4_dev->mc_list_lock);
+	rcu_read_unlock();
 	in_dev_put(in4_dev);
 
 	netif_carrier_off(card->dev);
@@ -1396,6 +1399,7 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	int rc, index;
 	int cstat, dstat;
 
+	kstat_cpu(smp_processor_id()).irqs[IOINT_LCS]++;
 	if (lcs_check_irb_error(cdev, irb))
 		return;
 
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index e6b2df0e73f..29f848bfc12 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2840,6 +2840,7 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
 		queue->card->perf_stats.outbound_do_qdio_time +=
 			qeth_get_micros() -
 			queue->card->perf_stats.outbound_do_qdio_start_time;
+	atomic_add(count, &queue->used_buffers);
 	if (rc) {
 		queue->card->stats.tx_errors += count;
 		/* ignore temporary SIGA errors without busy condition */
@@ -2853,7 +2854,6 @@ static void qeth_flush_buffers(struct qeth_qdio_out_q *queue, int index,
 		qeth_schedule_recovery(queue->card);
 		return;
 	}
-	atomic_add(count, &queue->used_buffers);
 	if (queue->card->options.performance_stats)
 		queue->card->perf_stats.bufs_sent += count;
 }
@@ -3831,6 +3831,8 @@ static int qeth_qdio_establish(struct qeth_card *card)
 	init_data.int_parm               = (unsigned long) card;
 	init_data.input_sbal_addr_array  = (void **) in_sbal_ptrs;
 	init_data.output_sbal_addr_array = (void **) out_sbal_ptrs;
+	init_data.scan_threshold =
+		(card->info.type == QETH_CARD_TYPE_IQD) ? 8 : 32;
 
 	if (atomic_cmpxchg(&card->qdio.state, QETH_QDIO_ALLOCATED,
 		QETH_QDIO_ESTABLISHED) == QETH_QDIO_ALLOCATED) {
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index e37dd8c4bf4..07d588867b5 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -333,7 +333,7 @@ struct qeth_arp_query_data {
 	__u16 request_bits;
 	__u16 reply_bits;
 	__u32 no_entries;
-	char data;
+	char data; /* only for replies */
 } __attribute__((packed));
 
 /* used as parameter for arp_query reply */
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index 42fa783a70c..b5e967cf7e2 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -372,7 +372,7 @@ static ssize_t qeth_dev_performance_stats_store(struct device *dev,
 	i = simple_strtoul(buf, &tmp, 16);
 	if ((i == 0) || (i == 1)) {
 		if (i == card->options.performance_stats)
-			goto out;;
+			goto out;
 		card->options.performance_stats = i;
 		if (i == 0)
 			memset(&card->perf_stats, 0,
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 847e8797073..7a7a1b66478 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -849,8 +849,6 @@ static int qeth_l2_open(struct net_device *dev)
 	card->state = CARD_STATE_UP;
 	netif_start_queue(dev);
 
-	if (!card->lan_online && netif_carrier_ok(dev))
-		netif_carrier_off(dev);
 	if (qdio_stop_irq(card->data.ccwdev, 0) >= 0) {
 		napi_enable(&card->napi);
 		napi_schedule(&card->napi);
@@ -1013,13 +1011,14 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 			dev_warn(&card->gdev->dev,
 				"The LAN is offline\n");
 			card->lan_online = 0;
-			goto out;
+			goto contin;
 		}
 		rc = -ENODEV;
 		goto out_remove;
 	} else
 		card->lan_online = 1;
 
+contin:
 	if ((card->info.type == QETH_CARD_TYPE_OSD) ||
 	    (card->info.type == QETH_CARD_TYPE_OSX))
 		/* configure isolation level */
@@ -1038,7 +1037,10 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 		goto out_remove;
 	}
 	card->state = CARD_STATE_SOFTSETUP;
-	netif_carrier_on(card->dev);
+	if (card->lan_online)
+		netif_carrier_on(card->dev);
+	else
+		netif_carrier_off(card->dev);
 
 	qeth_set_allowed_threads(card, 0xffffffff, 0);
 	if (recover_flag == CARD_STATE_RECOVER) {
@@ -1055,7 +1057,6 @@ static int __qeth_l2_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 	}
 	/* let user_space know that device is online */
 	kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE);
-out:
 	mutex_unlock(&card->conf_mutex);
 	mutex_unlock(&card->discipline_mutex);
 	return 0;
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 74d1401a5d5..e227e465bfc 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -30,6 +30,7 @@
 
 #include "qeth_l3.h"
 
+
 static int qeth_l3_set_offline(struct ccwgroup_device *);
 static int qeth_l3_recover(void *);
 static int qeth_l3_stop(struct net_device *);
@@ -455,8 +456,11 @@ static void qeth_l3_set_ip_addr_list(struct qeth_card *card)
 	QETH_CARD_TEXT(card, 2, "sdiplist");
 	QETH_CARD_HEX(card, 2, &card, sizeof(void *));
 
-	if (card->options.sniffer)
+	if ((card->state != CARD_STATE_UP &&
+	     card->state != CARD_STATE_SOFTSETUP) || card->options.sniffer) {
 		return;
+	}
+
 	spin_lock_irqsave(&card->ip_lock, flags);
 	tbd_list = card->ip_tbd_list;
 	card->ip_tbd_list = kmalloc(sizeof(struct list_head), GFP_ATOMIC);
@@ -1796,7 +1800,8 @@ static void qeth_l3_add_mc(struct qeth_card *card, struct in_device *in4_dev)
 	char buf[MAX_ADDR_LEN];
 
 	QETH_CARD_TEXT(card, 4, "addmc");
-	for (im4 = in4_dev->mc_list; im4; im4 = im4->next) {
+	for (im4 = rcu_dereference(in4_dev->mc_list); im4 != NULL;
+	     im4 = rcu_dereference(im4->next_rcu)) {
 		qeth_l3_get_mac_for_ipm(im4->multiaddr, buf, in4_dev->dev);
 		ipm = qeth_l3_get_addr_buffer(QETH_PROT_IPV4);
 		if (!ipm)
@@ -1828,9 +1833,9 @@ static void qeth_l3_add_vlan_mc(struct qeth_card *card)
 		in_dev = in_dev_get(netdev);
 		if (!in_dev)
 			continue;
-		read_lock(&in_dev->mc_list_lock);
+		rcu_read_lock();
 		qeth_l3_add_mc(card, in_dev);
-		read_unlock(&in_dev->mc_list_lock);
+		rcu_read_unlock();
 		in_dev_put(in_dev);
 	}
 }
@@ -1843,10 +1848,10 @@ static void qeth_l3_add_multicast_ipv4(struct qeth_card *card)
 	in4_dev = in_dev_get(card->dev);
 	if (in4_dev == NULL)
 		return;
-	read_lock(&in4_dev->mc_list_lock);
+	rcu_read_lock();
 	qeth_l3_add_mc(card, in4_dev);
 	qeth_l3_add_vlan_mc(card);
-	read_unlock(&in4_dev->mc_list_lock);
+	rcu_read_unlock();
 	in_dev_put(in4_dev);
 }
 
@@ -2454,22 +2459,46 @@ static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries)
 	return rc;
 }
 
-static void qeth_l3_copy_arp_entries_stripped(struct qeth_arp_query_info *qinfo,
-		struct qeth_arp_query_data *qdata, int entry_size,
-		int uentry_size)
+static __u32 get_arp_entry_size(struct qeth_card *card,
+			struct qeth_arp_query_data *qdata,
+			struct qeth_arp_entrytype *type, __u8 strip_entries)
 {
-	char *entry_ptr;
-	char *uentry_ptr;
-	int i;
+	__u32 rc;
+	__u8 is_hsi;
 
-	entry_ptr = (char *)&qdata->data;
-	uentry_ptr = (char *)(qinfo->udata + qinfo->udata_offset);
-	for (i = 0; i < qdata->no_entries; ++i) {
-		/* strip off 32 bytes "media specific information" */
-		memcpy(uentry_ptr, (entry_ptr + 32), entry_size - 32);
-		entry_ptr += entry_size;
-		uentry_ptr += uentry_size;
+	is_hsi = qdata->reply_bits == 5;
+	if (type->ip == QETHARP_IP_ADDR_V4) {
+		QETH_CARD_TEXT(card, 4, "arpev4");
+		if (strip_entries) {
+			rc = is_hsi ? sizeof(struct qeth_arp_qi_entry5_short) :
+				sizeof(struct qeth_arp_qi_entry7_short);
+		} else {
+			rc = is_hsi ? sizeof(struct qeth_arp_qi_entry5) :
+				sizeof(struct qeth_arp_qi_entry7);
+		}
+	} else if (type->ip == QETHARP_IP_ADDR_V6) {
+		QETH_CARD_TEXT(card, 4, "arpev6");
+		if (strip_entries) {
+			rc = is_hsi ?
+				sizeof(struct qeth_arp_qi_entry5_short_ipv6) :
+				sizeof(struct qeth_arp_qi_entry7_short_ipv6);
+		} else {
+			rc = is_hsi ?
+				sizeof(struct qeth_arp_qi_entry5_ipv6) :
+				sizeof(struct qeth_arp_qi_entry7_ipv6);
+		}
+	} else {
+		QETH_CARD_TEXT(card, 4, "arpinv");
+		rc = 0;
 	}
+
+	return rc;
+}
+
+static int arpentry_matches_prot(struct qeth_arp_entrytype *type, __u16 prot)
+{
+	return (type->ip == QETHARP_IP_ADDR_V4 && prot == QETH_PROT_IPV4) ||
+		(type->ip == QETHARP_IP_ADDR_V6 && prot == QETH_PROT_IPV6);
 }
 
 static int qeth_l3_arp_query_cb(struct qeth_card *card,
@@ -2478,72 +2507,77 @@ static int qeth_l3_arp_query_cb(struct qeth_card *card,
 	struct qeth_ipa_cmd *cmd;
 	struct qeth_arp_query_data *qdata;
 	struct qeth_arp_query_info *qinfo;
-	int entry_size;
-	int uentry_size;
 	int i;
+	int e;
+	int entrybytes_done;
+	int stripped_bytes;
+	__u8 do_strip_entries;
 
-	QETH_CARD_TEXT(card, 4, "arpquecb");
+	QETH_CARD_TEXT(card, 3, "arpquecb");
 
 	qinfo = (struct qeth_arp_query_info *) reply->param;
 	cmd = (struct qeth_ipa_cmd *) data;
+	QETH_CARD_TEXT_(card, 4, "%i", cmd->hdr.prot_version);
 	if (cmd->hdr.return_code) {
-		QETH_CARD_TEXT_(card, 4, "qaer1%i", cmd->hdr.return_code);
+		QETH_CARD_TEXT(card, 4, "arpcberr");
+		QETH_CARD_TEXT_(card, 4, "%i", cmd->hdr.return_code);
 		return 0;
 	}
 	if (cmd->data.setassparms.hdr.return_code) {
 		cmd->hdr.return_code = cmd->data.setassparms.hdr.return_code;
-		QETH_CARD_TEXT_(card, 4, "qaer2%i", cmd->hdr.return_code);
+		QETH_CARD_TEXT(card, 4, "setaperr");
+		QETH_CARD_TEXT_(card, 4, "%i", cmd->hdr.return_code);
 		return 0;
 	}
 	qdata = &cmd->data.setassparms.data.query_arp;
-	switch (qdata->reply_bits) {
-	case 5:
-		uentry_size = entry_size = sizeof(struct qeth_arp_qi_entry5);
-		if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES)
-			uentry_size = sizeof(struct qeth_arp_qi_entry5_short);
-		break;
-	case 7:
-		/* fall through to default */
-	default:
-		/* tr is the same as eth -> entry7 */
-		uentry_size = entry_size = sizeof(struct qeth_arp_qi_entry7);
-		if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES)
-			uentry_size = sizeof(struct qeth_arp_qi_entry7_short);
-		break;
-	}
-	/* check if there is enough room in userspace */
-	if ((qinfo->udata_len - qinfo->udata_offset) <
-			qdata->no_entries * uentry_size){
-		QETH_CARD_TEXT_(card, 4, "qaer3%i", -ENOMEM);
-		cmd->hdr.return_code = -ENOMEM;
-		goto out_error;
-	}
-	QETH_CARD_TEXT_(card, 4, "anore%i",
-		       cmd->data.setassparms.hdr.number_of_replies);
-	QETH_CARD_TEXT_(card, 4, "aseqn%i", cmd->data.setassparms.hdr.seq_no);
 	QETH_CARD_TEXT_(card, 4, "anoen%i", qdata->no_entries);
 
-	if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES) {
-		/* strip off "media specific information" */
-		qeth_l3_copy_arp_entries_stripped(qinfo, qdata, entry_size,
-					       uentry_size);
-	} else
-		/*copy entries to user buffer*/
-		memcpy(qinfo->udata + qinfo->udata_offset,
-		       (char *)&qdata->data, qdata->no_entries*uentry_size);
+	do_strip_entries = (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES) > 0;
+	stripped_bytes = do_strip_entries ? QETH_QARP_MEDIASPECIFIC_BYTES : 0;
+	entrybytes_done = 0;
+	for (e = 0; e < qdata->no_entries; ++e) {
+		char *cur_entry;
+		__u32 esize;
+		struct qeth_arp_entrytype *etype;
+
+		cur_entry = &qdata->data + entrybytes_done;
+		etype = &((struct qeth_arp_qi_entry5 *) cur_entry)->type;
+		if (!arpentry_matches_prot(etype, cmd->hdr.prot_version)) {
+			QETH_CARD_TEXT(card, 4, "pmis");
+			QETH_CARD_TEXT_(card, 4, "%i", etype->ip);
+			break;
+		}
+		esize = get_arp_entry_size(card, qdata, etype,
+			do_strip_entries);
+		QETH_CARD_TEXT_(card, 5, "esz%i", esize);
+		if (!esize)
+			break;
+
+		if ((qinfo->udata_len - qinfo->udata_offset) < esize) {
+			QETH_CARD_TEXT_(card, 4, "qaer3%i", -ENOMEM);
+			cmd->hdr.return_code = -ENOMEM;
+			goto out_error;
+		}
 
-	qinfo->no_entries += qdata->no_entries;
-	qinfo->udata_offset += (qdata->no_entries*uentry_size);
+		memcpy(qinfo->udata + qinfo->udata_offset,
+			&qdata->data + entrybytes_done + stripped_bytes,
+			esize);
+		entrybytes_done += esize + stripped_bytes;
+		qinfo->udata_offset += esize;
+		++qinfo->no_entries;
+	}
 	/* check if all replies received ... */
 	if (cmd->data.setassparms.hdr.seq_no <
 	    cmd->data.setassparms.hdr.number_of_replies)
 		return 1;
+	QETH_CARD_TEXT_(card, 4, "nove%i", qinfo->no_entries);
 	memcpy(qinfo->udata, &qinfo->no_entries, 4);
 	/* keep STRIP_ENTRIES flag so the user program can distinguish
 	 * stripped entries from normal ones */
 	if (qinfo->mask_bits & QETH_QARP_STRIP_ENTRIES)
 		qdata->reply_bits |= QETH_QARP_STRIP_ENTRIES;
 	memcpy(qinfo->udata + QETH_QARP_MASK_OFFSET, &qdata->reply_bits, 2);
+	QETH_CARD_TEXT_(card, 4, "rc%i", 0);
 	return 0;
 out_error:
 	i = 0;
@@ -2566,45 +2600,86 @@ static int qeth_l3_send_ipa_arp_cmd(struct qeth_card *card,
 				      reply_cb, reply_param);
 }
 
-static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata)
+static int qeth_l3_query_arp_cache_info(struct qeth_card *card,
+	enum qeth_prot_versions prot,
+	struct qeth_arp_query_info *qinfo)
 {
 	struct qeth_cmd_buffer *iob;
-	struct qeth_arp_query_info qinfo = {0, };
+	struct qeth_ipa_cmd *cmd;
 	int tmp;
 	int rc;
 
+	QETH_CARD_TEXT_(card, 3, "qarpipv%i", prot);
+
+	iob = qeth_l3_get_setassparms_cmd(card, IPA_ARP_PROCESSING,
+			IPA_CMD_ASS_ARP_QUERY_INFO,
+			sizeof(struct qeth_arp_query_data) - sizeof(char),
+			prot);
+	cmd = (struct qeth_ipa_cmd *)(iob->data+IPA_PDU_HEADER_SIZE);
+	cmd->data.setassparms.data.query_arp.request_bits = 0x000F;
+	cmd->data.setassparms.data.query_arp.reply_bits = 0;
+	cmd->data.setassparms.data.query_arp.no_entries = 0;
+	rc = qeth_l3_send_ipa_arp_cmd(card, iob,
+			   QETH_SETASS_BASE_LEN+QETH_ARP_CMD_LEN,
+			   qeth_l3_arp_query_cb, (void *)qinfo);
+	if (rc) {
+		tmp = rc;
+		QETH_DBF_MESSAGE(2,
+			"Error while querying ARP cache on %s: %s "
+			"(0x%x/%d)\n", QETH_CARD_IFNAME(card),
+			qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
+	}
+
+	return rc;
+}
+
+static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata)
+{
+	struct qeth_arp_query_info qinfo = {0, };
+	int rc;
+
 	QETH_CARD_TEXT(card, 3, "arpquery");
 
 	if (!qeth_is_supported(card,/*IPA_QUERY_ARP_ADDR_INFO*/
 			       IPA_ARP_PROCESSING)) {
-		return -EOPNOTSUPP;
+		QETH_CARD_TEXT(card, 3, "arpqnsup");
+		rc = -EOPNOTSUPP;
+		goto out;
 	}
 	/* get size of userspace buffer and mask_bits -> 6 bytes */
-	if (copy_from_user(&qinfo, udata, 6))
-		return -EFAULT;
+	if (copy_from_user(&qinfo, udata, 6)) {
+		rc = -EFAULT;
+		goto out;
+	}
 	qinfo.udata = kzalloc(qinfo.udata_len, GFP_KERNEL);
-	if (!qinfo.udata)
-		return -ENOMEM;
+	if (!qinfo.udata) {
+		rc = -ENOMEM;
+		goto out;
+	}
 	qinfo.udata_offset = QETH_QARP_ENTRIES_OFFSET;
-	iob = qeth_l3_get_setassparms_cmd(card, IPA_ARP_PROCESSING,
-				       IPA_CMD_ASS_ARP_QUERY_INFO,
-				       sizeof(int), QETH_PROT_IPV4);
-
-	rc = qeth_l3_send_ipa_arp_cmd(card, iob,
-				   QETH_SETASS_BASE_LEN+QETH_ARP_CMD_LEN,
-				   qeth_l3_arp_query_cb, (void *)&qinfo);
+	rc = qeth_l3_query_arp_cache_info(card, QETH_PROT_IPV4, &qinfo);
 	if (rc) {
-		tmp = rc;
-		QETH_DBF_MESSAGE(2, "Error while querying ARP cache on %s: %s "
-			"(0x%x/%d)\n", QETH_CARD_IFNAME(card),
-			qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
 		if (copy_to_user(udata, qinfo.udata, 4))
 			rc = -EFAULT;
+			goto free_and_out;
 	} else {
-		if (copy_to_user(udata, qinfo.udata, qinfo.udata_len))
+#ifdef CONFIG_QETH_IPV6
+		if (qinfo.mask_bits & QETH_QARP_WITH_IPV6) {
+			/* fails in case of GuestLAN QDIO mode */
+			qeth_l3_query_arp_cache_info(card, QETH_PROT_IPV6,
+				&qinfo);
+		}
+#endif
+		if (copy_to_user(udata, qinfo.udata, qinfo.udata_len)) {
+			QETH_CARD_TEXT(card, 4, "qactf");
 			rc = -EFAULT;
+			goto free_and_out;
+		}
+		QETH_CARD_TEXT_(card, 4, "qacts");
 	}
+free_and_out:
 	kfree(qinfo.udata);
+out:
 	return rc;
 }
 
@@ -2938,6 +3013,7 @@ static void qeth_tso_fill_header(struct qeth_card *card,
 
 	/*fix header to TSO values ...*/
 	hdr->hdr.hdr.l3.id = QETH_HEADER_TYPE_TSO;
+	hdr->hdr.hdr.l3.length = skb->len - sizeof(struct qeth_hdr_tso);
 	/*set values which are fix for the first approach ...*/
 	hdr->ext.hdr_tot_len = (__u16) sizeof(struct qeth_hdr_ext_tso);
 	hdr->ext.imb_hdr_no  = 1;
@@ -3039,7 +3115,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
 				skb_pull(new_skb, ETH_HLEN);
 		}
 
-		if (ipv == 6 && card->vlangrp &&
+		if (ipv != 4 && card->vlangrp &&
 				vlan_tx_tag_present(new_skb)) {
 			skb_push(new_skb, VLAN_HLEN);
 			skb_copy_to_linear_data(new_skb, new_skb->data + 4, 4);
@@ -3176,8 +3252,6 @@ static int qeth_l3_open(struct net_device *dev)
 	card->state = CARD_STATE_UP;
 	netif_start_queue(dev);
 
-	if (!card->lan_online && netif_carrier_ok(dev))
-		netif_carrier_off(dev);
 	if (qdio_stop_irq(card->data.ccwdev, 0) >= 0) {
 		napi_enable(&card->napi);
 		napi_schedule(&card->napi);
@@ -3449,13 +3523,14 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 			dev_warn(&card->gdev->dev,
 				"The LAN is offline\n");
 			card->lan_online = 0;
-			goto out;
+			goto contin;
 		}
 		rc = -ENODEV;
 		goto out_remove;
 	} else
 		card->lan_online = 1;
 
+contin:
 	rc = qeth_l3_setadapter_parms(card);
 	if (rc)
 		QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc);
@@ -3480,10 +3555,13 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 		goto out_remove;
 	}
 	card->state = CARD_STATE_SOFTSETUP;
-	netif_carrier_on(card->dev);
 
 	qeth_set_allowed_threads(card, 0xffffffff, 0);
 	qeth_l3_set_ip_addr_list(card);
+	if (card->lan_online)
+		netif_carrier_on(card->dev);
+	else
+		netif_carrier_off(card->dev);
 	if (recover_flag == CARD_STATE_RECOVER) {
 		if (recovery_mode)
 			qeth_l3_open(card->dev);
@@ -3496,7 +3574,6 @@ static int __qeth_l3_set_online(struct ccwgroup_device *gdev, int recovery_mode)
 	}
 	/* let user_space know that device is online */
 	kobject_uevent(&gdev->dev.kobj, KOBJ_CHANGE);
-out:
 	mutex_unlock(&card->conf_mutex);
 	mutex_unlock(&card->discipline_mutex);
 	return 0;
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 044fb22718d..51c666fb67a 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -45,8 +45,8 @@ static char *init_device;
 module_param_named(device, init_device, charp, 0400);
 MODULE_PARM_DESC(device, "specify initial device");
 
-static struct kmem_cache *zfcp_cache_hw_align(const char *name,
-					      unsigned long size)
+static struct kmem_cache * __init zfcp_cache_hw_align(const char *name,
+						      unsigned long size)
 {
 	return kmem_cache_create(name, size, roundup_pow_of_two(size), 0, NULL);
 }
@@ -311,8 +311,7 @@ int zfcp_status_read_refill(struct zfcp_adapter *adapter)
 		if (zfcp_fsf_status_read(adapter->qdio)) {
 			if (atomic_read(&adapter->stat_miss) >=
 			    adapter->stat_read_buf_num) {
-				zfcp_erp_adapter_reopen(adapter, 0, "axsref1",
-							NULL);
+				zfcp_erp_adapter_reopen(adapter, 0, "axsref1");
 				return 1;
 			}
 			break;
@@ -459,7 +458,7 @@ void zfcp_adapter_unregister(struct zfcp_adapter *adapter)
 	sysfs_remove_group(&cdev->dev.kobj, &zfcp_sysfs_adapter_attrs);
 
 	zfcp_erp_thread_kill(adapter);
-	zfcp_dbf_adapter_unregister(adapter->dbf);
+	zfcp_dbf_adapter_unregister(adapter);
 	zfcp_qdio_destroy(adapter->qdio);
 
 	zfcp_ccw_adapter_put(adapter); /* final put to release */
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index 0833c2b51e3..4f7852dd30c 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -48,7 +48,7 @@ static int zfcp_ccw_activate(struct ccw_device *cdev)
 
 	zfcp_erp_set_adapter_status(adapter, ZFCP_STATUS_COMMON_RUNNING);
 	zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
-				"ccresu2", NULL);
+				"ccresu2");
 	zfcp_erp_wait(adapter);
 	flush_work(&adapter->scan_work);
 
@@ -182,7 +182,7 @@ static int zfcp_ccw_set_offline(struct ccw_device *cdev)
 	if (!adapter)
 		return 0;
 
-	zfcp_erp_adapter_shutdown(adapter, 0, "ccsoff1", NULL);
+	zfcp_erp_adapter_shutdown(adapter, 0, "ccsoff1");
 	zfcp_erp_wait(adapter);
 
 	zfcp_ccw_adapter_put(adapter);
@@ -207,24 +207,24 @@ static int zfcp_ccw_notify(struct ccw_device *cdev, int event)
 	switch (event) {
 	case CIO_GONE:
 		dev_warn(&cdev->dev, "The FCP device has been detached\n");
-		zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti1", NULL);
+		zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti1");
 		break;
 	case CIO_NO_PATH:
 		dev_warn(&cdev->dev,
 			 "The CHPID for the FCP device is offline\n");
-		zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti2", NULL);
+		zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti2");
 		break;
 	case CIO_OPER:
 		dev_info(&cdev->dev, "The FCP device is operational again\n");
 		zfcp_erp_set_adapter_status(adapter,
 					    ZFCP_STATUS_COMMON_RUNNING);
 		zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
-					"ccnoti4", NULL);
+					"ccnoti4");
 		break;
 	case CIO_BOXED:
 		dev_warn(&cdev->dev, "The FCP device did not respond within "
 				     "the specified time\n");
-		zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti5", NULL);
+		zfcp_erp_adapter_shutdown(adapter, 0, "ccnoti5");
 		break;
 	}
 
@@ -243,7 +243,7 @@ static void zfcp_ccw_shutdown(struct ccw_device *cdev)
 	if (!adapter)
 		return;
 
-	zfcp_erp_adapter_shutdown(adapter, 0, "ccshut1", NULL);
+	zfcp_erp_adapter_shutdown(adapter, 0, "ccshut1");
 	zfcp_erp_wait(adapter);
 	zfcp_erp_thread_kill(adapter);
 
diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c
index d692e229ecb..46342fee394 100644
--- a/drivers/s390/scsi/zfcp_cfdc.c
+++ b/drivers/s390/scsi/zfcp_cfdc.c
@@ -288,7 +288,7 @@ void zfcp_cfdc_adapter_access_changed(struct zfcp_adapter *adapter)
 		    (status & ZFCP_STATUS_COMMON_ACCESS_BOXED))
 			zfcp_erp_port_reopen(port,
 					     ZFCP_STATUS_COMMON_ERP_FAILED,
-					     "cfaac_1", NULL);
+					     "cfaac_1");
 	}
 	read_unlock_irqrestore(&adapter->port_list_lock, flags);
 
@@ -299,7 +299,7 @@ void zfcp_cfdc_adapter_access_changed(struct zfcp_adapter *adapter)
 		    (status & ZFCP_STATUS_COMMON_ACCESS_BOXED))
 			zfcp_erp_lun_reopen(sdev,
 					    ZFCP_STATUS_COMMON_ERP_FAILED,
-					    "cfaac_2", NULL);
+					    "cfaac_2");
 	}
 }
 
@@ -426,7 +426,7 @@ int zfcp_cfdc_open_lun_eval(struct scsi_device *sdev,
 			zfcp_scsi_dev_lun(sdev),
 			(unsigned long long)zfcp_sdev->port->wwpn);
 		zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_ERP_FAILED);
-		zfcp_erp_lun_shutdown(sdev, 0, "fsouh_6", NULL);
+		zfcp_erp_lun_shutdown(sdev, 0, "fsouh_6");
 		return -EACCES;
 	}
 
@@ -437,7 +437,7 @@ int zfcp_cfdc_open_lun_eval(struct scsi_device *sdev,
 			zfcp_scsi_dev_lun(sdev),
 			(unsigned long long)zfcp_sdev->port->wwpn);
 		zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_ERP_FAILED);
-		zfcp_erp_lun_shutdown(sdev, 0, "fsosh_8", NULL);
+		zfcp_erp_lun_shutdown(sdev, 0, "fsosh_8");
 		return -EACCES;
 	}
 
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index 2cdd6b28ff7..96d1462e0bf 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -3,7 +3,7 @@
  *
  * Debug traces for zfcp.
  *
- * Copyright IBM Corporation 2002, 2009
+ * Copyright IBM Corporation 2002, 2010
  */
 
 #define KMSG_COMPONENT "zfcp"
@@ -22,980 +22,392 @@ module_param(dbfsize, uint, 0400);
 MODULE_PARM_DESC(dbfsize,
 		 "number of pages for each debug feature area (default 4)");
 
-static void zfcp_dbf_hexdump(debug_info_t *dbf, void *to, int to_len,
-			     int level, char *from, int from_len)
+static inline unsigned int zfcp_dbf_plen(unsigned int offset)
 {
-	int offset;
-	struct zfcp_dbf_dump *dump = to;
-	int room = to_len - sizeof(*dump);
-
-	for (offset = 0; offset < from_len; offset += dump->size) {
-		memset(to, 0, to_len);
-		strncpy(dump->tag, "dump", ZFCP_DBF_TAG_SIZE);
-		dump->total_size = from_len;
-		dump->offset = offset;
-		dump->size = min(from_len - offset, room);
-		memcpy(dump->data, from + offset, dump->size);
-		debug_event(dbf, level, dump, dump->size + sizeof(*dump));
-	}
+	return sizeof(struct zfcp_dbf_pay) + offset - ZFCP_DBF_PAY_MAX_REC;
 }
 
-static void zfcp_dbf_tag(char **p, const char *label, const char *tag)
+static inline
+void zfcp_dbf_pl_write(struct zfcp_dbf *dbf, void *data, u16 length, char *area,
+		       u64 req_id)
 {
-	int i;
-
-	*p += sprintf(*p, "%-24s", label);
-	for (i = 0; i < ZFCP_DBF_TAG_SIZE; i++)
-		*p += sprintf(*p, "%c", tag[i]);
-	*p += sprintf(*p, "\n");
-}
+	struct zfcp_dbf_pay *pl = &dbf->pay_buf;
+	u16 offset = 0, rec_length;
 
-static void zfcp_dbf_outs(char **buf, const char *s1, const char *s2)
-{
-	*buf += sprintf(*buf, "%-24s%s\n", s1, s2);
-}
+	spin_lock(&dbf->pay_lock);
+	memset(pl, 0, sizeof(*pl));
+	pl->fsf_req_id = req_id;
+	memcpy(pl->area, area, ZFCP_DBF_TAG_LEN);
 
-static void zfcp_dbf_out(char **buf, const char *s, const char *format, ...)
-{
-	va_list arg;
+	while (offset < length) {
+		rec_length = min((u16) ZFCP_DBF_PAY_MAX_REC,
+				 (u16) (length - offset));
+		memcpy(pl->data, data + offset, rec_length);
+		debug_event(dbf->pay, 1, pl, zfcp_dbf_plen(rec_length));
 
-	*buf += sprintf(*buf, "%-24s", s);
-	va_start(arg, format);
-	*buf += vsprintf(*buf, format, arg);
-	va_end(arg);
-	*buf += sprintf(*buf, "\n");
-}
-
-static void zfcp_dbf_outd(char **p, const char *label, char *buffer,
-			  int buflen, int offset, int total_size)
-{
-	if (!offset)
-		*p += sprintf(*p, "%-24s  ", label);
-	while (buflen--) {
-		if (offset > 0) {
-			if ((offset % 32) == 0)
-				*p += sprintf(*p, "\n%-24c  ", ' ');
-			else if ((offset % 4) == 0)
-				*p += sprintf(*p, " ");
-		}
-		*p += sprintf(*p, "%02x", *buffer++);
-		if (++offset == total_size) {
-			*p += sprintf(*p, "\n");
-			break;
-		}
+		offset += rec_length;
+		pl->counter++;
 	}
-	if (!total_size)
-		*p += sprintf(*p, "\n");
-}
 
-static int zfcp_dbf_view_header(debug_info_t *id, struct debug_view *view,
-				int area, debug_entry_t *entry, char *out_buf)
-{
-	struct zfcp_dbf_dump *dump = (struct zfcp_dbf_dump *)DEBUG_DATA(entry);
-	struct timespec t;
-	char *p = out_buf;
-
-	if (strncmp(dump->tag, "dump", ZFCP_DBF_TAG_SIZE) != 0) {
-		stck_to_timespec(entry->id.stck, &t);
-		zfcp_dbf_out(&p, "timestamp", "%011lu:%06lu",
-			     t.tv_sec, t.tv_nsec);
-		zfcp_dbf_out(&p, "cpu", "%02i", entry->id.fields.cpuid);
-	} else	{
-		zfcp_dbf_outd(&p, "", dump->data, dump->size, dump->offset,
-			      dump->total_size);
-		if ((dump->offset + dump->size) == dump->total_size)
-			p += sprintf(p, "\n");
-	}
-	return p - out_buf;
+	spin_unlock(&dbf->pay_lock);
 }
 
-void _zfcp_dbf_hba_fsf_response(const char *tag2, int level,
-				struct zfcp_fsf_req *fsf_req,
-				struct zfcp_dbf *dbf)
+/**
+ * zfcp_dbf_hba_fsf_res - trace event for fsf responses
+ * @tag: tag indicating which kind of unsolicited status has been received
+ * @req: request for which a response was received
+ */
+void zfcp_dbf_hba_fsf_res(char *tag, struct zfcp_fsf_req *req)
 {
-	struct fsf_qtcb *qtcb = fsf_req->qtcb;
-	union fsf_prot_status_qual *prot_status_qual =
-					&qtcb->prefix.prot_status_qual;
-	union fsf_status_qual *fsf_status_qual = &qtcb->header.fsf_status_qual;
-	struct scsi_cmnd *scsi_cmnd;
-	struct zfcp_port *port;
-	struct zfcp_unit *unit;
-	struct zfcp_send_els *send_els;
-	struct zfcp_dbf_hba_record *rec = &dbf->hba_buf;
-	struct zfcp_dbf_hba_record_response *response = &rec->u.response;
+	struct zfcp_dbf *dbf = req->adapter->dbf;
+	struct fsf_qtcb_prefix *q_pref = &req->qtcb->prefix;
+	struct fsf_qtcb_header *q_head = &req->qtcb->header;
+	struct zfcp_dbf_hba *rec = &dbf->hba_buf;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dbf->hba_lock, flags);
 	memset(rec, 0, sizeof(*rec));
-	strncpy(rec->tag, "resp", ZFCP_DBF_TAG_SIZE);
-	strncpy(rec->tag2, tag2, ZFCP_DBF_TAG_SIZE);
-
-	response->fsf_command = fsf_req->fsf_command;
-	response->fsf_reqid = fsf_req->req_id;
-	response->fsf_seqno = fsf_req->seq_no;
-	response->fsf_issued = fsf_req->issued;
-	response->fsf_prot_status = qtcb->prefix.prot_status;
-	response->fsf_status = qtcb->header.fsf_status;
-	memcpy(response->fsf_prot_status_qual,
-	       prot_status_qual, FSF_PROT_STATUS_QUAL_SIZE);
-	memcpy(response->fsf_status_qual,
-	       fsf_status_qual, FSF_STATUS_QUALIFIER_SIZE);
-	response->fsf_req_status = fsf_req->status;
-	response->sbal_first = fsf_req->qdio_req.sbal_first;
-	response->sbal_last = fsf_req->qdio_req.sbal_last;
-	response->sbal_response = fsf_req->qdio_req.sbal_response;
-	response->pool = fsf_req->pool != NULL;
-	response->erp_action = (unsigned long)fsf_req->erp_action;
-
-	switch (fsf_req->fsf_command) {
-	case FSF_QTCB_FCP_CMND:
-		if (fsf_req->status & ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT)
-			break;
-		scsi_cmnd = (struct scsi_cmnd *)fsf_req->data;
-		if (scsi_cmnd) {
-			response->u.fcp.cmnd = (unsigned long)scsi_cmnd;
-			response->u.fcp.data_dir =
-				qtcb->bottom.io.data_direction;
-		}
-		break;
-
-	case FSF_QTCB_OPEN_PORT_WITH_DID:
-	case FSF_QTCB_CLOSE_PORT:
-	case FSF_QTCB_CLOSE_PHYSICAL_PORT:
-		port = (struct zfcp_port *)fsf_req->data;
-		response->u.port.wwpn = port->wwpn;
-		response->u.port.d_id = port->d_id;
-		response->u.port.port_handle = qtcb->header.port_handle;
-		break;
-
-	case FSF_QTCB_OPEN_LUN:
-	case FSF_QTCB_CLOSE_LUN:
-		unit = (struct zfcp_unit *)fsf_req->data;
-		port = unit->port;
-		response->u.unit.wwpn = port->wwpn;
-		response->u.unit.fcp_lun = unit->fcp_lun;
-		response->u.unit.port_handle = qtcb->header.port_handle;
-		response->u.unit.lun_handle = qtcb->header.lun_handle;
-		break;
-
-	case FSF_QTCB_SEND_ELS:
-		send_els = (struct zfcp_send_els *)fsf_req->data;
-		response->u.els.d_id = ntoh24(qtcb->bottom.support.d_id);
-		break;
-
-	case FSF_QTCB_ABORT_FCP_CMND:
-	case FSF_QTCB_SEND_GENERIC:
-	case FSF_QTCB_EXCHANGE_CONFIG_DATA:
-	case FSF_QTCB_EXCHANGE_PORT_DATA:
-	case FSF_QTCB_DOWNLOAD_CONTROL_FILE:
-	case FSF_QTCB_UPLOAD_CONTROL_FILE:
-		break;
-	}
-
-	debug_event(dbf->hba, level, rec, sizeof(*rec));
 
-	/* have fcp channel microcode fixed to use as little as possible */
-	if (fsf_req->fsf_command != FSF_QTCB_FCP_CMND) {
-		/* adjust length skipping trailing zeros */
-		char *buf = (char *)qtcb + qtcb->header.log_start;
-		int len = qtcb->header.log_length;
-		for (; len && !buf[len - 1]; len--);
-		zfcp_dbf_hexdump(dbf->hba, rec, sizeof(*rec), level, buf,
-				 len);
+	memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
+	rec->id = ZFCP_DBF_HBA_RES;
+	rec->fsf_req_id = req->req_id;
+	rec->fsf_req_status = req->status;
+	rec->fsf_cmd = req->fsf_command;
+	rec->fsf_seq_no = req->seq_no;
+	rec->u.res.req_issued = req->issued;
+	rec->u.res.prot_status = q_pref->prot_status;
+	rec->u.res.fsf_status = q_head->fsf_status;
+
+	memcpy(rec->u.res.prot_status_qual, &q_pref->prot_status_qual,
+	       FSF_PROT_STATUS_QUAL_SIZE);
+	memcpy(rec->u.res.fsf_status_qual, &q_head->fsf_status_qual,
+	       FSF_STATUS_QUALIFIER_SIZE);
+
+	if (req->fsf_command != FSF_QTCB_FCP_CMND) {
+		rec->pl_len = q_head->log_length;
+		zfcp_dbf_pl_write(dbf, (char *)q_pref + q_head->log_start,
+				  rec->pl_len, "fsf_res", req->req_id);
 	}
 
-	spin_unlock_irqrestore(&dbf->hba_lock, flags);
-}
-
-void _zfcp_dbf_hba_fsf_unsol(const char *tag, int level, struct zfcp_dbf *dbf,
-			     struct fsf_status_read_buffer *status_buffer)
-{
-	struct zfcp_dbf_hba_record *rec = &dbf->hba_buf;
-	unsigned long flags;
-
-	spin_lock_irqsave(&dbf->hba_lock, flags);
-	memset(rec, 0, sizeof(*rec));
-	strncpy(rec->tag, "stat", ZFCP_DBF_TAG_SIZE);
-	strncpy(rec->tag2, tag, ZFCP_DBF_TAG_SIZE);
-
-	rec->u.status.failed = atomic_read(&dbf->adapter->stat_miss);
-	if (status_buffer != NULL) {
-		rec->u.status.status_type = status_buffer->status_type;
-		rec->u.status.status_subtype = status_buffer->status_subtype;
-		memcpy(&rec->u.status.queue_designator,
-		       &status_buffer->queue_designator,
-		       sizeof(struct fsf_queue_designator));
-
-		switch (status_buffer->status_type) {
-		case FSF_STATUS_READ_SENSE_DATA_AVAIL:
-			rec->u.status.payload_size =
-			    ZFCP_DBF_UNSOL_PAYLOAD_SENSE_DATA_AVAIL;
-			break;
-
-		case FSF_STATUS_READ_BIT_ERROR_THRESHOLD:
-			rec->u.status.payload_size =
-			    ZFCP_DBF_UNSOL_PAYLOAD_BIT_ERROR_THRESHOLD;
-			break;
-
-		case FSF_STATUS_READ_LINK_DOWN:
-			switch (status_buffer->status_subtype) {
-			case FSF_STATUS_READ_SUB_NO_PHYSICAL_LINK:
-			case FSF_STATUS_READ_SUB_FDISC_FAILED:
-				rec->u.status.payload_size =
-					sizeof(struct fsf_link_down_info);
-			}
-			break;
-
-		case FSF_STATUS_READ_FEATURE_UPDATE_ALERT:
-			rec->u.status.payload_size =
-			    ZFCP_DBF_UNSOL_PAYLOAD_FEATURE_UPDATE_ALERT;
-			break;
-		}
-		memcpy(&rec->u.status.payload,
-		       &status_buffer->payload, rec->u.status.payload_size);
-	}
-
-	debug_event(dbf->hba, level, rec, sizeof(*rec));
+	debug_event(dbf->hba, 1, rec, sizeof(*rec));
 	spin_unlock_irqrestore(&dbf->hba_lock, flags);
 }
 
 /**
- * zfcp_dbf_hba_qdio - trace event for QDIO related failure
- * @qdio: qdio structure affected by this QDIO related event
- * @qdio_error: as passed by qdio module
- * @sbal_index: first buffer with error condition, as passed by qdio module
- * @sbal_count: number of buffers affected, as passed by qdio module
+ * zfcp_dbf_hba_fsf_uss - trace event for an unsolicited status buffer
+ * @tag: tag indicating which kind of unsolicited status has been received
+ * @req: request providing the unsolicited status
  */
-void zfcp_dbf_hba_qdio(struct zfcp_dbf *dbf, unsigned int qdio_error,
-		       int sbal_index, int sbal_count)
+void zfcp_dbf_hba_fsf_uss(char *tag, struct zfcp_fsf_req *req)
 {
-	struct zfcp_dbf_hba_record *r = &dbf->hba_buf;
+	struct zfcp_dbf *dbf = req->adapter->dbf;
+	struct fsf_status_read_buffer *srb = req->data;
+	struct zfcp_dbf_hba *rec = &dbf->hba_buf;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dbf->hba_lock, flags);
-	memset(r, 0, sizeof(*r));
-	strncpy(r->tag, "qdio", ZFCP_DBF_TAG_SIZE);
-	r->u.qdio.qdio_error = qdio_error;
-	r->u.qdio.sbal_index = sbal_index;
-	r->u.qdio.sbal_count = sbal_count;
-	debug_event(dbf->hba, 0, r, sizeof(*r));
+	memset(rec, 0, sizeof(*rec));
+
+	memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
+	rec->id = ZFCP_DBF_HBA_USS;
+	rec->fsf_req_id = req->req_id;
+	rec->fsf_req_status = req->status;
+	rec->fsf_cmd = req->fsf_command;
+
+	if (!srb)
+		goto log;
+
+	rec->u.uss.status_type = srb->status_type;
+	rec->u.uss.status_subtype = srb->status_subtype;
+	rec->u.uss.d_id = ntoh24(srb->d_id);
+	rec->u.uss.lun = srb->fcp_lun;
+	memcpy(&rec->u.uss.queue_designator, &srb->queue_designator,
+	       sizeof(rec->u.uss.queue_designator));
+
+	/* status read buffer payload length */
+	rec->pl_len = (!srb->length) ? 0 : srb->length -
+			offsetof(struct fsf_status_read_buffer, payload);
+
+	if (rec->pl_len)
+		zfcp_dbf_pl_write(dbf, srb->payload.data, rec->pl_len,
+				  "fsf_uss", req->req_id);
+log:
+	debug_event(dbf->hba, 2, rec, sizeof(*rec));
 	spin_unlock_irqrestore(&dbf->hba_lock, flags);
 }
 
 /**
- * zfcp_dbf_hba_berr - trace event for bit error threshold
- * @dbf: dbf structure affected by this QDIO related event
- * @req: fsf request
+ * zfcp_dbf_hba_bit_err - trace event for bit error conditions
+ * @tag: tag indicating which kind of unsolicited status has been received
+ * @req: request which caused the bit_error condition
  */
-void zfcp_dbf_hba_berr(struct zfcp_dbf *dbf, struct zfcp_fsf_req *req)
+void zfcp_dbf_hba_bit_err(char *tag, struct zfcp_fsf_req *req)
 {
-	struct zfcp_dbf_hba_record *r = &dbf->hba_buf;
+	struct zfcp_dbf *dbf = req->adapter->dbf;
+	struct zfcp_dbf_hba *rec = &dbf->hba_buf;
 	struct fsf_status_read_buffer *sr_buf = req->data;
-	struct fsf_bit_error_payload *err = &sr_buf->payload.bit_error;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dbf->hba_lock, flags);
-	memset(r, 0, sizeof(*r));
-	strncpy(r->tag, "berr", ZFCP_DBF_TAG_SIZE);
-	memcpy(&r->u.berr, err, sizeof(struct fsf_bit_error_payload));
-	debug_event(dbf->hba, 0, r, sizeof(*r));
-	spin_unlock_irqrestore(&dbf->hba_lock, flags);
-}
-static void zfcp_dbf_hba_view_response(char **p,
-				       struct zfcp_dbf_hba_record_response *r)
-{
-	struct timespec t;
-
-	zfcp_dbf_out(p, "fsf_command", "0x%08x", r->fsf_command);
-	zfcp_dbf_out(p, "fsf_reqid", "0x%0Lx", r->fsf_reqid);
-	zfcp_dbf_out(p, "fsf_seqno", "0x%08x", r->fsf_seqno);
-	stck_to_timespec(r->fsf_issued, &t);
-	zfcp_dbf_out(p, "fsf_issued", "%011lu:%06lu", t.tv_sec, t.tv_nsec);
-	zfcp_dbf_out(p, "fsf_prot_status", "0x%08x", r->fsf_prot_status);
-	zfcp_dbf_out(p, "fsf_status", "0x%08x", r->fsf_status);
-	zfcp_dbf_outd(p, "fsf_prot_status_qual", r->fsf_prot_status_qual,
-		      FSF_PROT_STATUS_QUAL_SIZE, 0, FSF_PROT_STATUS_QUAL_SIZE);
-	zfcp_dbf_outd(p, "fsf_status_qual", r->fsf_status_qual,
-		      FSF_STATUS_QUALIFIER_SIZE, 0, FSF_STATUS_QUALIFIER_SIZE);
-	zfcp_dbf_out(p, "fsf_req_status", "0x%08x", r->fsf_req_status);
-	zfcp_dbf_out(p, "sbal_first", "0x%02x", r->sbal_first);
-	zfcp_dbf_out(p, "sbal_last", "0x%02x", r->sbal_last);
-	zfcp_dbf_out(p, "sbal_response", "0x%02x", r->sbal_response);
-	zfcp_dbf_out(p, "pool", "0x%02x", r->pool);
-
-	switch (r->fsf_command) {
-	case FSF_QTCB_FCP_CMND:
-		if (r->fsf_req_status & ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT)
-			break;
-		zfcp_dbf_out(p, "data_direction", "0x%04x", r->u.fcp.data_dir);
-		zfcp_dbf_out(p, "scsi_cmnd", "0x%0Lx", r->u.fcp.cmnd);
-		*p += sprintf(*p, "\n");
-		break;
-
-	case FSF_QTCB_OPEN_PORT_WITH_DID:
-	case FSF_QTCB_CLOSE_PORT:
-	case FSF_QTCB_CLOSE_PHYSICAL_PORT:
-		zfcp_dbf_out(p, "wwpn", "0x%016Lx", r->u.port.wwpn);
-		zfcp_dbf_out(p, "d_id", "0x%06x", r->u.port.d_id);
-		zfcp_dbf_out(p, "port_handle", "0x%08x", r->u.port.port_handle);
-		break;
-
-	case FSF_QTCB_OPEN_LUN:
-	case FSF_QTCB_CLOSE_LUN:
-		zfcp_dbf_out(p, "wwpn", "0x%016Lx", r->u.unit.wwpn);
-		zfcp_dbf_out(p, "fcp_lun", "0x%016Lx", r->u.unit.fcp_lun);
-		zfcp_dbf_out(p, "port_handle", "0x%08x", r->u.unit.port_handle);
-		zfcp_dbf_out(p, "lun_handle", "0x%08x", r->u.unit.lun_handle);
-		break;
-
-	case FSF_QTCB_SEND_ELS:
-		zfcp_dbf_out(p, "d_id", "0x%06x", r->u.els.d_id);
-		break;
-
-	case FSF_QTCB_ABORT_FCP_CMND:
-	case FSF_QTCB_SEND_GENERIC:
-	case FSF_QTCB_EXCHANGE_CONFIG_DATA:
-	case FSF_QTCB_EXCHANGE_PORT_DATA:
-	case FSF_QTCB_DOWNLOAD_CONTROL_FILE:
-	case FSF_QTCB_UPLOAD_CONTROL_FILE:
-		break;
-	}
-}
-
-static void zfcp_dbf_hba_view_status(char **p,
-				     struct zfcp_dbf_hba_record_status *r)
-{
-	zfcp_dbf_out(p, "failed", "0x%02x", r->failed);
-	zfcp_dbf_out(p, "status_type", "0x%08x", r->status_type);
-	zfcp_dbf_out(p, "status_subtype", "0x%08x", r->status_subtype);
-	zfcp_dbf_outd(p, "queue_designator", (char *)&r->queue_designator,
-		      sizeof(struct fsf_queue_designator), 0,
-		      sizeof(struct fsf_queue_designator));
-	zfcp_dbf_outd(p, "payload", (char *)&r->payload, r->payload_size, 0,
-		      r->payload_size);
-}
-
-static void zfcp_dbf_hba_view_qdio(char **p, struct zfcp_dbf_hba_record_qdio *r)
-{
-	zfcp_dbf_out(p, "qdio_error", "0x%08x", r->qdio_error);
-	zfcp_dbf_out(p, "sbal_index", "0x%02x", r->sbal_index);
-	zfcp_dbf_out(p, "sbal_count", "0x%02x", r->sbal_count);
-}
+	memset(rec, 0, sizeof(*rec));
 
-static void zfcp_dbf_hba_view_berr(char **p, struct fsf_bit_error_payload *r)
-{
-	zfcp_dbf_out(p, "link_failures", "%d", r->link_failure_error_count);
-	zfcp_dbf_out(p, "loss_of_sync_err", "%d", r->loss_of_sync_error_count);
-	zfcp_dbf_out(p, "loss_of_sig_err", "%d", r->loss_of_signal_error_count);
-	zfcp_dbf_out(p, "prim_seq_err", "%d",
-		     r->primitive_sequence_error_count);
-	zfcp_dbf_out(p, "inval_trans_word_err", "%d",
-		     r->invalid_transmission_word_error_count);
-	zfcp_dbf_out(p, "CRC_errors", "%d", r->crc_error_count);
-	zfcp_dbf_out(p, "prim_seq_event_to", "%d",
-		     r->primitive_sequence_event_timeout_count);
-	zfcp_dbf_out(p, "elast_buf_overrun_err", "%d",
-		     r->elastic_buffer_overrun_error_count);
-	zfcp_dbf_out(p, "adv_rec_buf2buf_cred", "%d",
-		     r->advertised_receive_b2b_credit);
-	zfcp_dbf_out(p, "curr_rec_buf2buf_cred", "%d",
-		     r->current_receive_b2b_credit);
-	zfcp_dbf_out(p, "adv_trans_buf2buf_cred", "%d",
-		     r->advertised_transmit_b2b_credit);
-	zfcp_dbf_out(p, "curr_trans_buf2buf_cred", "%d",
-		     r->current_transmit_b2b_credit);
-}
+	memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
+	rec->id = ZFCP_DBF_HBA_BIT;
+	rec->fsf_req_id = req->req_id;
+	rec->fsf_req_status = req->status;
+	rec->fsf_cmd = req->fsf_command;
+	memcpy(&rec->u.be, &sr_buf->payload.bit_error,
+	       sizeof(struct fsf_bit_error_payload));
 
-static int zfcp_dbf_hba_view_format(debug_info_t *id, struct debug_view *view,
-				    char *out_buf, const char *in_buf)
-{
-	struct zfcp_dbf_hba_record *r = (struct zfcp_dbf_hba_record *)in_buf;
-	char *p = out_buf;
-
-	if (strncmp(r->tag, "dump", ZFCP_DBF_TAG_SIZE) == 0)
-		return 0;
-
-	zfcp_dbf_tag(&p, "tag", r->tag);
-	if (isalpha(r->tag2[0]))
-		zfcp_dbf_tag(&p, "tag2", r->tag2);
-
-	if (strncmp(r->tag, "resp", ZFCP_DBF_TAG_SIZE) == 0)
-		zfcp_dbf_hba_view_response(&p, &r->u.response);
-	else if (strncmp(r->tag, "stat", ZFCP_DBF_TAG_SIZE) == 0)
-		zfcp_dbf_hba_view_status(&p, &r->u.status);
-	else if (strncmp(r->tag, "qdio", ZFCP_DBF_TAG_SIZE) == 0)
-		zfcp_dbf_hba_view_qdio(&p, &r->u.qdio);
-	else if (strncmp(r->tag, "berr", ZFCP_DBF_TAG_SIZE) == 0)
-		zfcp_dbf_hba_view_berr(&p, &r->u.berr);
-
-	if (strncmp(r->tag, "resp", ZFCP_DBF_TAG_SIZE) != 0)
-		p += sprintf(p, "\n");
-	return p - out_buf;
+	debug_event(dbf->hba, 1, rec, sizeof(*rec));
+	spin_unlock_irqrestore(&dbf->hba_lock, flags);
 }
 
-static struct debug_view zfcp_dbf_hba_view = {
-	.name = "structured",
-	.header_proc = zfcp_dbf_view_header,
-	.format_proc = zfcp_dbf_hba_view_format,
-};
-
-static const char *zfcp_dbf_rec_tags[] = {
-	[ZFCP_REC_DBF_ID_THREAD] = "thread",
-	[ZFCP_REC_DBF_ID_TARGET] = "target",
-	[ZFCP_REC_DBF_ID_TRIGGER] = "trigger",
-	[ZFCP_REC_DBF_ID_ACTION] = "action",
-};
-
-static int zfcp_dbf_rec_view_format(debug_info_t *id, struct debug_view *view,
-				    char *buf, const char *_rec)
+static void zfcp_dbf_set_common(struct zfcp_dbf_rec *rec,
+				struct zfcp_adapter *adapter,
+				struct zfcp_port *port,
+				struct scsi_device *sdev)
 {
-	struct zfcp_dbf_rec_record *r = (struct zfcp_dbf_rec_record *)_rec;
-	char *p = buf;
-	char hint[ZFCP_DBF_ID_SIZE + 1];
-
-	memcpy(hint, r->id2, ZFCP_DBF_ID_SIZE);
-	hint[ZFCP_DBF_ID_SIZE] = 0;
-	zfcp_dbf_outs(&p, "tag", zfcp_dbf_rec_tags[r->id]);
-	zfcp_dbf_outs(&p, "hint", hint);
-	switch (r->id) {
-	case ZFCP_REC_DBF_ID_THREAD:
-		zfcp_dbf_out(&p, "total", "%d", r->u.thread.total);
-		zfcp_dbf_out(&p, "ready", "%d", r->u.thread.ready);
-		zfcp_dbf_out(&p, "running", "%d", r->u.thread.running);
-		break;
-	case ZFCP_REC_DBF_ID_TARGET:
-		zfcp_dbf_out(&p, "reference", "0x%016Lx", r->u.target.ref);
-		zfcp_dbf_out(&p, "status", "0x%08x", r->u.target.status);
-		zfcp_dbf_out(&p, "erp_count", "%d", r->u.target.erp_count);
-		zfcp_dbf_out(&p, "d_id", "0x%06x", r->u.target.d_id);
-		zfcp_dbf_out(&p, "wwpn", "0x%016Lx", r->u.target.wwpn);
-		zfcp_dbf_out(&p, "fcp_lun", "0x%016Lx", r->u.target.fcp_lun);
-		break;
-	case ZFCP_REC_DBF_ID_TRIGGER:
-		zfcp_dbf_out(&p, "reference", "0x%016Lx", r->u.trigger.ref);
-		zfcp_dbf_out(&p, "erp_action", "0x%016Lx", r->u.trigger.action);
-		zfcp_dbf_out(&p, "requested", "%d", r->u.trigger.want);
-		zfcp_dbf_out(&p, "executed", "%d", r->u.trigger.need);
-		zfcp_dbf_out(&p, "wwpn", "0x%016Lx", r->u.trigger.wwpn);
-		zfcp_dbf_out(&p, "fcp_lun", "0x%016Lx", r->u.trigger.fcp_lun);
-		zfcp_dbf_out(&p, "adapter_status", "0x%08x", r->u.trigger.as);
-		zfcp_dbf_out(&p, "port_status", "0x%08x", r->u.trigger.ps);
-		zfcp_dbf_out(&p, "lun_status", "0x%08x", r->u.trigger.ls);
-		break;
-	case ZFCP_REC_DBF_ID_ACTION:
-		zfcp_dbf_out(&p, "erp_action", "0x%016Lx", r->u.action.action);
-		zfcp_dbf_out(&p, "fsf_req", "0x%016Lx", r->u.action.fsf_req);
-		zfcp_dbf_out(&p, "status", "0x%08Lx", r->u.action.status);
-		zfcp_dbf_out(&p, "step", "0x%08Lx", r->u.action.step);
-		break;
+	rec->adapter_status = atomic_read(&adapter->status);
+	if (port) {
+		rec->port_status = atomic_read(&port->status);
+		rec->wwpn = port->wwpn;
+		rec->d_id = port->d_id;
+	}
+	if (sdev) {
+		rec->lun_status = atomic_read(&sdev_to_zfcp(sdev)->status);
+		rec->lun = zfcp_scsi_dev_lun(sdev);
 	}
-	p += sprintf(p, "\n");
-	return p - buf;
 }
 
-static struct debug_view zfcp_dbf_rec_view = {
-	.name = "structured",
-	.header_proc = zfcp_dbf_view_header,
-	.format_proc = zfcp_dbf_rec_view_format,
-};
-
 /**
- * zfcp_dbf_rec_thread - trace event related to recovery thread operation
- * @id2: identifier for event
- * @dbf: reference to dbf structure
- * This function assumes that the caller is holding erp_lock.
+ * zfcp_dbf_rec_trig - trace event related to triggered recovery
+ * @tag: identifier for event
+ * @adapter: adapter on which the erp_action should run
+ * @port: remote port involved in the erp_action
+ * @sdev: scsi device involved in the erp_action
+ * @want: wanted erp_action
+ * @need: required erp_action
+ *
+ * The adapter->erp_lock has to be held.
  */
-void zfcp_dbf_rec_thread(char *id2, struct zfcp_dbf *dbf)
+void zfcp_dbf_rec_trig(char *tag, struct zfcp_adapter *adapter,
+		       struct zfcp_port *port, struct scsi_device *sdev,
+		       u8 want, u8 need)
 {
-	struct zfcp_adapter *adapter = dbf->adapter;
-	struct zfcp_dbf_rec_record *r = &dbf->rec_buf;
-	unsigned long flags = 0;
+	struct zfcp_dbf *dbf = adapter->dbf;
+	struct zfcp_dbf_rec *rec = &dbf->rec_buf;
 	struct list_head *entry;
-	unsigned ready = 0, running = 0, total;
-
-	list_for_each(entry, &adapter->erp_ready_head)
-		ready++;
-	list_for_each(entry, &adapter->erp_running_head)
-		running++;
-	total = adapter->erp_total_count;
-
-	spin_lock_irqsave(&dbf->rec_lock, flags);
-	memset(r, 0, sizeof(*r));
-	r->id = ZFCP_REC_DBF_ID_THREAD;
-	memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE);
-	r->u.thread.total = total;
-	r->u.thread.ready = ready;
-	r->u.thread.running = running;
-	debug_event(dbf->rec, 6, r, sizeof(*r));
-	spin_unlock_irqrestore(&dbf->rec_lock, flags);
-}
-
-/**
- * zfcp_dbf_rec_thread - trace event related to recovery thread operation
- * @id2: identifier for event
- * @adapter: adapter
- * This function assumes that the caller does not hold erp_lock.
- */
-void zfcp_dbf_rec_thread_lock(char *id2, struct zfcp_dbf *dbf)
-{
-	struct zfcp_adapter *adapter = dbf->adapter;
-	unsigned long flags;
-
-	read_lock_irqsave(&adapter->erp_lock, flags);
-	zfcp_dbf_rec_thread(id2, dbf);
-	read_unlock_irqrestore(&adapter->erp_lock, flags);
-}
-
-static void zfcp_dbf_rec_target(char *id2, void *ref, struct zfcp_dbf *dbf,
-				atomic_t *status, atomic_t *erp_count, u64 wwpn,
-				u32 d_id, u64 fcp_lun)
-{
-	struct zfcp_dbf_rec_record *r = &dbf->rec_buf;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dbf->rec_lock, flags);
-	memset(r, 0, sizeof(*r));
-	r->id = ZFCP_REC_DBF_ID_TARGET;
-	memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE);
-	r->u.target.ref = (unsigned long)ref;
-	r->u.target.status = atomic_read(status);
-	r->u.target.wwpn = wwpn;
-	r->u.target.d_id = d_id;
-	r->u.target.fcp_lun = fcp_lun;
-	r->u.target.erp_count = atomic_read(erp_count);
-	debug_event(dbf->rec, 3, r, sizeof(*r));
-	spin_unlock_irqrestore(&dbf->rec_lock, flags);
-}
-
-/**
- * zfcp_dbf_rec_adapter - trace event for adapter state change
- * @id: identifier for trigger of state change
- * @ref: additional reference (e.g. request)
- * @dbf: reference to dbf structure
- */
-void zfcp_dbf_rec_adapter(char *id, void *ref, struct zfcp_dbf *dbf)
-{
-	struct zfcp_adapter *adapter = dbf->adapter;
-
-	zfcp_dbf_rec_target(id, ref, dbf, &adapter->status,
-			    &adapter->erp_counter, 0, 0,
-			    ZFCP_DBF_INVALID_LUN);
-}
-
-/**
- * zfcp_dbf_rec_port - trace event for port state change
- * @id: identifier for trigger of state change
- * @ref: additional reference (e.g. request)
- * @port: port
- */
-void zfcp_dbf_rec_port(char *id, void *ref, struct zfcp_port *port)
-{
-	struct zfcp_dbf *dbf = port->adapter->dbf;
+	memset(rec, 0, sizeof(*rec));
 
-	zfcp_dbf_rec_target(id, ref, dbf, &port->status,
-			    &port->erp_counter, port->wwpn, port->d_id,
-			    ZFCP_DBF_INVALID_LUN);
-}
+	rec->id = ZFCP_DBF_REC_TRIG;
+	memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
+	zfcp_dbf_set_common(rec, adapter, port, sdev);
 
-/**
- * zfcp_dbf_rec_lun - trace event for LUN state change
- * @id: identifier for trigger of state change
- * @ref: additional reference (e.g. request)
- * @sdev: SCSI device
- */
-void zfcp_dbf_rec_lun(char *id, void *ref, struct scsi_device *sdev)
-{
-	struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
-	struct zfcp_port *port = zfcp_sdev->port;
-	struct zfcp_dbf *dbf = port->adapter->dbf;
+	list_for_each(entry, &adapter->erp_ready_head)
+		rec->u.trig.ready++;
 
-	zfcp_dbf_rec_target(id, ref, dbf, &zfcp_sdev->status,
-			    &zfcp_sdev->erp_counter, port->wwpn, port->d_id,
-			    zfcp_scsi_dev_lun(sdev));
-}
+	list_for_each(entry, &adapter->erp_running_head)
+		rec->u.trig.running++;
 
-/**
- * zfcp_dbf_rec_trigger - trace event for triggered error recovery
- * @id2: identifier for error recovery trigger
- * @ref: additional reference (e.g. request)
- * @want: originally requested error recovery action
- * @need: error recovery action actually initiated
- * @action: address of error recovery action struct
- * @adapter: adapter
- * @port: port
- * @sdev: SCSI device
- */
-void zfcp_dbf_rec_trigger(char *id2, void *ref, u8 want, u8 need, void *action,
-			  struct zfcp_adapter *adapter, struct zfcp_port *port,
-			  struct scsi_device *sdev)
-{
-	struct zfcp_dbf *dbf = adapter->dbf;
-	struct zfcp_dbf_rec_record *r = &dbf->rec_buf;
-	unsigned long flags;
+	rec->u.trig.want = want;
+	rec->u.trig.need = need;
 
-	spin_lock_irqsave(&dbf->rec_lock, flags);
-	memset(r, 0, sizeof(*r));
-	r->id = ZFCP_REC_DBF_ID_TRIGGER;
-	memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE);
-	r->u.trigger.ref = (unsigned long)ref;
-	r->u.trigger.want = want;
-	r->u.trigger.need = need;
-	r->u.trigger.action = (unsigned long)action;
-	r->u.trigger.as = atomic_read(&adapter->status);
-	if (port) {
-		r->u.trigger.ps = atomic_read(&port->status);
-		r->u.trigger.wwpn = port->wwpn;
-	}
-	if (sdev)
-		r->u.trigger.ls = atomic_read(&sdev_to_zfcp(sdev)->status);
-	r->u.trigger.fcp_lun = sdev ? zfcp_scsi_dev_lun(sdev) :
-				      ZFCP_DBF_INVALID_LUN;
-	debug_event(dbf->rec, action ? 1 : 4, r, sizeof(*r));
+	debug_event(dbf->rec, 1, rec, sizeof(*rec));
 	spin_unlock_irqrestore(&dbf->rec_lock, flags);
 }
 
+
 /**
- * zfcp_dbf_rec_action - trace event showing progress of recovery action
- * @id2: identifier
- * @erp_action: error recovery action struct pointer
+ * zfcp_dbf_rec_run - trace event related to running recovery
+ * @tag: identifier for event
+ * @erp: erp_action running
  */
-void zfcp_dbf_rec_action(char *id2, struct zfcp_erp_action *erp_action)
+void zfcp_dbf_rec_run(char *tag, struct zfcp_erp_action *erp)
 {
-	struct zfcp_dbf *dbf = erp_action->adapter->dbf;
-	struct zfcp_dbf_rec_record *r = &dbf->rec_buf;
+	struct zfcp_dbf *dbf = erp->adapter->dbf;
+	struct zfcp_dbf_rec *rec = &dbf->rec_buf;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dbf->rec_lock, flags);
-	memset(r, 0, sizeof(*r));
-	r->id = ZFCP_REC_DBF_ID_ACTION;
-	memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE);
-	r->u.action.action = (unsigned long)erp_action;
-	r->u.action.status = erp_action->status;
-	r->u.action.step = erp_action->step;
-	r->u.action.fsf_req = erp_action->fsf_req_id;
-	debug_event(dbf->rec, 5, r, sizeof(*r));
-	spin_unlock_irqrestore(&dbf->rec_lock, flags);
-}
+	memset(rec, 0, sizeof(*rec));
 
-/**
- * zfcp_dbf_san_ct_request - trace event for issued CT request
- * @fsf_req: request containing issued CT data
- * @d_id: destination id where ct request is sent to
- */
-void zfcp_dbf_san_ct_request(struct zfcp_fsf_req *fsf_req, u32 d_id)
-{
-	struct zfcp_fsf_ct_els *ct = (struct zfcp_fsf_ct_els *)fsf_req->data;
-	struct zfcp_adapter *adapter = fsf_req->adapter;
-	struct zfcp_dbf *dbf = adapter->dbf;
-	struct fc_ct_hdr *hdr = sg_virt(ct->req);
-	struct zfcp_dbf_san_record *r = &dbf->san_buf;
-	struct zfcp_dbf_san_record_ct_request *oct = &r->u.ct_req;
-	int level = 3;
-	unsigned long flags;
+	rec->id = ZFCP_DBF_REC_RUN;
+	memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
+	zfcp_dbf_set_common(rec, erp->adapter, erp->port, erp->sdev);
 
-	spin_lock_irqsave(&dbf->san_lock, flags);
-	memset(r, 0, sizeof(*r));
-	strncpy(r->tag, "octc", ZFCP_DBF_TAG_SIZE);
-	r->fsf_reqid = fsf_req->req_id;
-	r->fsf_seqno = fsf_req->seq_no;
-	oct->d_id = d_id;
-	oct->cmd_req_code = hdr->ct_cmd;
-	oct->revision = hdr->ct_rev;
-	oct->gs_type = hdr->ct_fs_type;
-	oct->gs_subtype = hdr->ct_fs_subtype;
-	oct->options = hdr->ct_options;
-	oct->max_res_size = hdr->ct_mr_size;
-	oct->len = min((int)ct->req->length - (int)sizeof(struct fc_ct_hdr),
-		       ZFCP_DBF_SAN_MAX_PAYLOAD);
-	debug_event(dbf->san, level, r, sizeof(*r));
-	zfcp_dbf_hexdump(dbf->san, r, sizeof(*r), level,
-			 (void *)hdr + sizeof(struct fc_ct_hdr), oct->len);
-	spin_unlock_irqrestore(&dbf->san_lock, flags);
-}
+	rec->u.run.fsf_req_id = erp->fsf_req_id;
+	rec->u.run.rec_status = erp->status;
+	rec->u.run.rec_step = erp->step;
+	rec->u.run.rec_action = erp->action;
 
-/**
- * zfcp_dbf_san_ct_response - trace event for completion of CT request
- * @fsf_req: request containing CT response
- */
-void zfcp_dbf_san_ct_response(struct zfcp_fsf_req *fsf_req)
-{
-	struct zfcp_fsf_ct_els *ct = (struct zfcp_fsf_ct_els *)fsf_req->data;
-	struct zfcp_adapter *adapter = fsf_req->adapter;
-	struct fc_ct_hdr *hdr = sg_virt(ct->resp);
-	struct zfcp_dbf *dbf = adapter->dbf;
-	struct zfcp_dbf_san_record *r = &dbf->san_buf;
-	struct zfcp_dbf_san_record_ct_response *rct = &r->u.ct_resp;
-	int level = 3;
-	unsigned long flags;
+	if (erp->sdev)
+		rec->u.run.rec_count =
+			atomic_read(&sdev_to_zfcp(erp->sdev)->erp_counter);
+	else if (erp->port)
+		rec->u.run.rec_count = atomic_read(&erp->port->erp_counter);
+	else
+		rec->u.run.rec_count = atomic_read(&erp->adapter->erp_counter);
 
-	spin_lock_irqsave(&dbf->san_lock, flags);
-	memset(r, 0, sizeof(*r));
-	strncpy(r->tag, "rctc", ZFCP_DBF_TAG_SIZE);
-	r->fsf_reqid = fsf_req->req_id;
-	r->fsf_seqno = fsf_req->seq_no;
-	rct->cmd_rsp_code = hdr->ct_cmd;
-	rct->revision = hdr->ct_rev;
-	rct->reason_code = hdr->ct_reason;
-	rct->expl = hdr->ct_explan;
-	rct->vendor_unique = hdr->ct_vendor;
-	rct->max_res_size = hdr->ct_mr_size;
-	rct->len = min((int)ct->resp->length - (int)sizeof(struct fc_ct_hdr),
-		       ZFCP_DBF_SAN_MAX_PAYLOAD);
-	debug_event(dbf->san, level, r, sizeof(*r));
-	zfcp_dbf_hexdump(dbf->san, r, sizeof(*r), level,
-			 (void *)hdr + sizeof(struct fc_ct_hdr), rct->len);
-	spin_unlock_irqrestore(&dbf->san_lock, flags);
+	debug_event(dbf->rec, 1, rec, sizeof(*rec));
+	spin_unlock_irqrestore(&dbf->rec_lock, flags);
 }
 
-static void zfcp_dbf_san_els(const char *tag, int level,
-			     struct zfcp_fsf_req *fsf_req, u32 d_id,
-			     void *buffer, int buflen)
+static inline
+void zfcp_dbf_san(char *tag, struct zfcp_dbf *dbf, void *data, u8 id, u16 len,
+		  u64 req_id, u32 d_id)
 {
-	struct zfcp_adapter *adapter = fsf_req->adapter;
-	struct zfcp_dbf *dbf = adapter->dbf;
-	struct zfcp_dbf_san_record *rec = &dbf->san_buf;
+	struct zfcp_dbf_san *rec = &dbf->san_buf;
+	u16 rec_len;
 	unsigned long flags;
 
 	spin_lock_irqsave(&dbf->san_lock, flags);
 	memset(rec, 0, sizeof(*rec));
-	strncpy(rec->tag, tag, ZFCP_DBF_TAG_SIZE);
-	rec->fsf_reqid = fsf_req->req_id;
-	rec->fsf_seqno = fsf_req->seq_no;
-	rec->u.els.d_id = d_id;
-	debug_event(dbf->san, level, rec, sizeof(*rec));
-	zfcp_dbf_hexdump(dbf->san, rec, sizeof(*rec), level,
-			 buffer, min(buflen, ZFCP_DBF_SAN_MAX_PAYLOAD));
+
+	rec->id = id;
+	rec->fsf_req_id = req_id;
+	rec->d_id = d_id;
+	rec_len = min(len, (u16)ZFCP_DBF_SAN_MAX_PAYLOAD);
+	memcpy(rec->payload, data, rec_len);
+	memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
+
+	debug_event(dbf->san, 1, rec, sizeof(*rec));
 	spin_unlock_irqrestore(&dbf->san_lock, flags);
 }
 
 /**
- * zfcp_dbf_san_els_request - trace event for issued ELS
- * @fsf_req: request containing issued ELS
+ * zfcp_dbf_san_req - trace event for issued SAN request
+ * @tag: indentifier for event
+ * @fsf_req: request containing issued CT data
+ * d_id: destination ID
  */
-void zfcp_dbf_san_els_request(struct zfcp_fsf_req *fsf_req)
+void zfcp_dbf_san_req(char *tag, struct zfcp_fsf_req *fsf, u32 d_id)
 {
-	struct zfcp_fsf_ct_els *els = (struct zfcp_fsf_ct_els *)fsf_req->data;
-	u32 d_id = ntoh24(fsf_req->qtcb->bottom.support.d_id);
+	struct zfcp_dbf *dbf = fsf->adapter->dbf;
+	struct zfcp_fsf_ct_els *ct_els = fsf->data;
+	u16 length;
 
-	zfcp_dbf_san_els("oels", 2, fsf_req, d_id,
-			 sg_virt(els->req), els->req->length);
+	length = (u16)(ct_els->req->length + FC_CT_HDR_LEN);
+	zfcp_dbf_san(tag, dbf, sg_virt(ct_els->req), ZFCP_DBF_SAN_REQ, length,
+		     fsf->req_id, d_id);
 }
 
 /**
- * zfcp_dbf_san_els_response - trace event for completed ELS
- * @fsf_req: request containing ELS response
+ * zfcp_dbf_san_res - trace event for received SAN request
+ * @tag: indentifier for event
+ * @fsf_req: request containing issued CT data
  */
-void zfcp_dbf_san_els_response(struct zfcp_fsf_req *fsf_req)
+void zfcp_dbf_san_res(char *tag, struct zfcp_fsf_req *fsf)
 {
-	struct zfcp_fsf_ct_els *els = (struct zfcp_fsf_ct_els *)fsf_req->data;
-	u32 d_id = ntoh24(fsf_req->qtcb->bottom.support.d_id);
+	struct zfcp_dbf *dbf = fsf->adapter->dbf;
+	struct zfcp_fsf_ct_els *ct_els = fsf->data;
+	u16 length;
 
-	zfcp_dbf_san_els("rels", 2, fsf_req, d_id,
-			       sg_virt(els->resp), els->resp->length);
+	length = (u16)(ct_els->resp->length + FC_CT_HDR_LEN);
+	zfcp_dbf_san(tag, dbf, sg_virt(ct_els->resp), ZFCP_DBF_SAN_RES, length,
+		     fsf->req_id, 0);
 }
 
 /**
- * zfcp_dbf_san_incoming_els - trace event for incomig ELS
- * @fsf_req: request containing unsolicited status buffer with incoming ELS
+ * zfcp_dbf_san_in_els - trace event for incoming ELS
+ * @tag: indentifier for event
+ * @fsf_req: request containing issued CT data
  */
-void zfcp_dbf_san_incoming_els(struct zfcp_fsf_req *fsf_req)
+void zfcp_dbf_san_in_els(char *tag, struct zfcp_fsf_req *fsf)
 {
-	struct fsf_status_read_buffer *buf =
-			(struct fsf_status_read_buffer *)fsf_req->data;
-	int length = (int)buf->length -
-		     (int)((void *)&buf->payload - (void *)buf);
+	struct zfcp_dbf *dbf = fsf->adapter->dbf;
+	struct fsf_status_read_buffer *srb =
+		(struct fsf_status_read_buffer *) fsf->data;
+	u16 length;
 
-	zfcp_dbf_san_els("iels", 1, fsf_req, ntoh24(buf->d_id),
-			       (void *)buf->payload.data, length);
-}
-
-static int zfcp_dbf_san_view_format(debug_info_t *id, struct debug_view *view,
-				    char *out_buf, const char *in_buf)
-{
-	struct zfcp_dbf_san_record *r = (struct zfcp_dbf_san_record *)in_buf;
-	char *p = out_buf;
-
-	if (strncmp(r->tag, "dump", ZFCP_DBF_TAG_SIZE) == 0)
-		return 0;
-
-	zfcp_dbf_tag(&p, "tag", r->tag);
-	zfcp_dbf_out(&p, "fsf_reqid", "0x%0Lx", r->fsf_reqid);
-	zfcp_dbf_out(&p, "fsf_seqno", "0x%08x", r->fsf_seqno);
-
-	if (strncmp(r->tag, "octc", ZFCP_DBF_TAG_SIZE) == 0) {
-		struct zfcp_dbf_san_record_ct_request *ct = &r->u.ct_req;
-		zfcp_dbf_out(&p, "d_id", "0x%06x", ct->d_id);
-		zfcp_dbf_out(&p, "cmd_req_code", "0x%04x", ct->cmd_req_code);
-		zfcp_dbf_out(&p, "revision", "0x%02x", ct->revision);
-		zfcp_dbf_out(&p, "gs_type", "0x%02x", ct->gs_type);
-		zfcp_dbf_out(&p, "gs_subtype", "0x%02x", ct->gs_subtype);
-		zfcp_dbf_out(&p, "options", "0x%02x", ct->options);
-		zfcp_dbf_out(&p, "max_res_size", "0x%04x", ct->max_res_size);
-	} else if (strncmp(r->tag, "rctc", ZFCP_DBF_TAG_SIZE) == 0) {
-		struct zfcp_dbf_san_record_ct_response *ct = &r->u.ct_resp;
-		zfcp_dbf_out(&p, "cmd_rsp_code", "0x%04x", ct->cmd_rsp_code);
-		zfcp_dbf_out(&p, "revision", "0x%02x", ct->revision);
-		zfcp_dbf_out(&p, "reason_code", "0x%02x", ct->reason_code);
-		zfcp_dbf_out(&p, "reason_code_expl", "0x%02x", ct->expl);
-		zfcp_dbf_out(&p, "vendor_unique", "0x%02x", ct->vendor_unique);
-		zfcp_dbf_out(&p, "max_res_size", "0x%04x", ct->max_res_size);
-	} else if (strncmp(r->tag, "oels", ZFCP_DBF_TAG_SIZE) == 0 ||
-		   strncmp(r->tag, "rels", ZFCP_DBF_TAG_SIZE) == 0 ||
-		   strncmp(r->tag, "iels", ZFCP_DBF_TAG_SIZE) == 0) {
-		struct zfcp_dbf_san_record_els *els = &r->u.els;
-		zfcp_dbf_out(&p, "d_id", "0x%06x", els->d_id);
-	}
-	return p - out_buf;
+	length = (u16)(srb->length -
+			offsetof(struct fsf_status_read_buffer, payload));
+	zfcp_dbf_san(tag, dbf, srb->payload.data, ZFCP_DBF_SAN_ELS, length,
+		     fsf->req_id, ntoh24(srb->d_id));
 }
 
-static struct debug_view zfcp_dbf_san_view = {
-	.name = "structured",
-	.header_proc = zfcp_dbf_view_header,
-	.format_proc = zfcp_dbf_san_view_format,
-};
-
-void _zfcp_dbf_scsi(const char *tag, const char *tag2, int level,
-		    struct zfcp_dbf *dbf, struct scsi_cmnd *scsi_cmnd,
-		    struct zfcp_fsf_req *fsf_req, unsigned long old_req_id)
+/**
+ * zfcp_dbf_scsi - trace event for scsi commands
+ * @tag: identifier for event
+ * @sc: pointer to struct scsi_cmnd
+ * @fsf: pointer to struct zfcp_fsf_req
+ */
+void zfcp_dbf_scsi(char *tag, struct scsi_cmnd *sc, struct zfcp_fsf_req *fsf)
 {
-	struct zfcp_dbf_scsi_record *rec = &dbf->scsi_buf;
-	struct zfcp_dbf_dump *dump = (struct zfcp_dbf_dump *)rec;
-	unsigned long flags;
+	struct zfcp_adapter *adapter =
+		(struct zfcp_adapter *) sc->device->host->hostdata[0];
+	struct zfcp_dbf *dbf = adapter->dbf;
+	struct zfcp_dbf_scsi *rec = &dbf->scsi_buf;
 	struct fcp_resp_with_ext *fcp_rsp;
-	struct fcp_resp_rsp_info *fcp_rsp_info = NULL;
-	char *fcp_sns_info = NULL;
-	int offset = 0, buflen = 0;
+	struct fcp_resp_rsp_info *fcp_rsp_info;
+	unsigned long flags;
 
 	spin_lock_irqsave(&dbf->scsi_lock, flags);
-	do {
-		memset(rec, 0, sizeof(*rec));
-		if (offset == 0) {
-			strncpy(rec->tag, tag, ZFCP_DBF_TAG_SIZE);
-			strncpy(rec->tag2, tag2, ZFCP_DBF_TAG_SIZE);
-			if (scsi_cmnd != NULL) {
-				if (scsi_cmnd->device) {
-					rec->scsi_id = scsi_cmnd->device->id;
-					rec->scsi_lun = scsi_cmnd->device->lun;
-				}
-				rec->scsi_result = scsi_cmnd->result;
-				rec->scsi_cmnd = (unsigned long)scsi_cmnd;
-				memcpy(rec->scsi_opcode, scsi_cmnd->cmnd,
-					min((int)scsi_cmnd->cmd_len,
-						ZFCP_DBF_SCSI_OPCODE));
-				rec->scsi_retries = scsi_cmnd->retries;
-				rec->scsi_allowed = scsi_cmnd->allowed;
-			}
-			if (fsf_req != NULL) {
-				fcp_rsp = (struct fcp_resp_with_ext *)
-					&(fsf_req->qtcb->bottom.io.fcp_rsp);
-				fcp_rsp_info = (struct fcp_resp_rsp_info *)
-					&fcp_rsp[1];
-				fcp_sns_info = (char *) &fcp_rsp[1];
-				if (fcp_rsp->resp.fr_flags & FCP_RSP_LEN_VAL)
-					fcp_sns_info += fcp_rsp->ext.fr_sns_len;
-
-				rec->rsp_validity = fcp_rsp->resp.fr_flags;
-				rec->rsp_scsi_status = fcp_rsp->resp.fr_status;
-				rec->rsp_resid = fcp_rsp->ext.fr_resid;
-				if (fcp_rsp->resp.fr_flags & FCP_RSP_LEN_VAL)
-					rec->rsp_code = fcp_rsp_info->rsp_code;
-				if (fcp_rsp->resp.fr_flags & FCP_SNS_LEN_VAL) {
-					buflen = min(fcp_rsp->ext.fr_sns_len,
-					   (u32)ZFCP_DBF_SCSI_MAX_FCP_SNS_INFO);
-					rec->sns_info_len = buflen;
-					memcpy(rec->sns_info, fcp_sns_info,
-					       min(buflen,
-						   ZFCP_DBF_SCSI_FCP_SNS_INFO));
-					offset += min(buflen,
-						      ZFCP_DBF_SCSI_FCP_SNS_INFO);
-				}
-
-				rec->fsf_reqid = fsf_req->req_id;
-				rec->fsf_seqno = fsf_req->seq_no;
-				rec->fsf_issued = fsf_req->issued;
-			}
-			rec->old_fsf_reqid = old_req_id;
-		} else {
-			strncpy(dump->tag, "dump", ZFCP_DBF_TAG_SIZE);
-			dump->total_size = buflen;
-			dump->offset = offset;
-			dump->size = min(buflen - offset,
-					 (int)sizeof(struct
-						     zfcp_dbf_scsi_record) -
-					 (int)sizeof(struct zfcp_dbf_dump));
-			memcpy(dump->data, fcp_sns_info + offset, dump->size);
-			offset += dump->size;
-		}
-		debug_event(dbf->scsi, level, rec, sizeof(*rec));
-	} while (offset < buflen);
-	spin_unlock_irqrestore(&dbf->scsi_lock, flags);
-}
+	memset(rec, 0, sizeof(*rec));
 
-static int zfcp_dbf_scsi_view_format(debug_info_t *id, struct debug_view *view,
-				     char *out_buf, const char *in_buf)
-{
-	struct zfcp_dbf_scsi_record *r = (struct zfcp_dbf_scsi_record *)in_buf;
-	struct timespec t;
-	char *p = out_buf;
-
-	if (strncmp(r->tag, "dump", ZFCP_DBF_TAG_SIZE) == 0)
-		return 0;
-
-	zfcp_dbf_tag(&p, "tag", r->tag);
-	zfcp_dbf_tag(&p, "tag2", r->tag2);
-	zfcp_dbf_out(&p, "scsi_id", "0x%08x", r->scsi_id);
-	zfcp_dbf_out(&p, "scsi_lun", "0x%08x", r->scsi_lun);
-	zfcp_dbf_out(&p, "scsi_result", "0x%08x", r->scsi_result);
-	zfcp_dbf_out(&p, "scsi_cmnd", "0x%0Lx", r->scsi_cmnd);
-	zfcp_dbf_outd(&p, "scsi_opcode", r->scsi_opcode, ZFCP_DBF_SCSI_OPCODE,
-		      0, ZFCP_DBF_SCSI_OPCODE);
-	zfcp_dbf_out(&p, "scsi_retries", "0x%02x", r->scsi_retries);
-	zfcp_dbf_out(&p, "scsi_allowed", "0x%02x", r->scsi_allowed);
-	if (strncmp(r->tag, "abrt", ZFCP_DBF_TAG_SIZE) == 0)
-		zfcp_dbf_out(&p, "old_fsf_reqid", "0x%0Lx", r->old_fsf_reqid);
-	zfcp_dbf_out(&p, "fsf_reqid", "0x%0Lx", r->fsf_reqid);
-	zfcp_dbf_out(&p, "fsf_seqno", "0x%08x", r->fsf_seqno);
-	stck_to_timespec(r->fsf_issued, &t);
-	zfcp_dbf_out(&p, "fsf_issued", "%011lu:%06lu", t.tv_sec, t.tv_nsec);
-
-	if (strncmp(r->tag, "rslt", ZFCP_DBF_TAG_SIZE) == 0) {
-		zfcp_dbf_out(&p, "fcp_rsp_validity", "0x%02x", r->rsp_validity);
-		zfcp_dbf_out(&p, "fcp_rsp_scsi_status", "0x%02x",
-			     r->rsp_scsi_status);
-		zfcp_dbf_out(&p, "fcp_rsp_resid", "0x%08x", r->rsp_resid);
-		zfcp_dbf_out(&p, "fcp_rsp_code", "0x%08x", r->rsp_code);
-		zfcp_dbf_out(&p, "fcp_sns_info_len", "0x%08x", r->sns_info_len);
-		zfcp_dbf_outd(&p, "fcp_sns_info", r->sns_info,
-			      min((int)r->sns_info_len,
-			      ZFCP_DBF_SCSI_FCP_SNS_INFO), 0,
-			      r->sns_info_len);
+	memcpy(rec->tag, tag, ZFCP_DBF_TAG_LEN);
+	rec->id = ZFCP_DBF_SCSI_CMND;
+	rec->scsi_result = sc->result;
+	rec->scsi_retries = sc->retries;
+	rec->scsi_allowed = sc->allowed;
+	rec->scsi_id = sc->device->id;
+	rec->scsi_lun = sc->device->lun;
+	rec->host_scribble = (unsigned long)sc->host_scribble;
+
+	memcpy(rec->scsi_opcode, sc->cmnd,
+	       min((int)sc->cmd_len, ZFCP_DBF_SCSI_OPCODE));
+
+	if (fsf) {
+		rec->fsf_req_id = fsf->req_id;
+		fcp_rsp = (struct fcp_resp_with_ext *)
+				&(fsf->qtcb->bottom.io.fcp_rsp);
+		memcpy(&rec->fcp_rsp, fcp_rsp, FCP_RESP_WITH_EXT);
+		if (fcp_rsp->resp.fr_flags & FCP_RSP_LEN_VAL) {
+			fcp_rsp_info = (struct fcp_resp_rsp_info *) &fcp_rsp[1];
+			rec->fcp_rsp_info = fcp_rsp_info->rsp_code;
+		}
+		if (fcp_rsp->resp.fr_flags & FCP_SNS_LEN_VAL) {
+			rec->pl_len = min((u16)SCSI_SENSE_BUFFERSIZE,
+					  (u16)ZFCP_DBF_PAY_MAX_REC);
+			zfcp_dbf_pl_write(dbf, sc->sense_buffer, rec->pl_len,
+					  "fcp_sns", fsf->req_id);
+		}
 	}
-	p += sprintf(p, "\n");
-	return p - out_buf;
-}
 
-static struct debug_view zfcp_dbf_scsi_view = {
-	.name = "structured",
-	.header_proc = zfcp_dbf_view_header,
-	.format_proc = zfcp_dbf_scsi_view_format,
-};
+	debug_event(dbf->scsi, 1, rec, sizeof(*rec));
+	spin_unlock_irqrestore(&dbf->scsi_lock, flags);
+}
 
-static debug_info_t *zfcp_dbf_reg(const char *name, int level,
-				  struct debug_view *view, int size)
+static debug_info_t *zfcp_dbf_reg(const char *name, int size, int rec_size)
 {
 	struct debug_info *d;
 
-	d = debug_register(name, dbfsize, level, size);
+	d = debug_register(name, size, 1, rec_size);
 	if (!d)
 		return NULL;
 
 	debug_register_view(d, &debug_hex_ascii_view);
-	debug_register_view(d, view);
-	debug_set_level(d, level);
+	debug_set_level(d, 3);
 
 	return d;
 }
 
+static void zfcp_dbf_unregister(struct zfcp_dbf *dbf)
+{
+	if (!dbf)
+		return;
+
+	debug_unregister(dbf->scsi);
+	debug_unregister(dbf->san);
+	debug_unregister(dbf->hba);
+	debug_unregister(dbf->pay);
+	debug_unregister(dbf->rec);
+	kfree(dbf);
+}
+
 /**
  * zfcp_adapter_debug_register - registers debug feature for an adapter
  * @adapter: pointer to adapter for which debug features should be registered
@@ -1003,69 +415,66 @@ static debug_info_t *zfcp_dbf_reg(const char *name, int level,
  */
 int zfcp_dbf_adapter_register(struct zfcp_adapter *adapter)
 {
-	char dbf_name[DEBUG_MAX_NAME_LEN];
+	char name[DEBUG_MAX_NAME_LEN];
 	struct zfcp_dbf *dbf;
 
 	dbf = kzalloc(sizeof(struct zfcp_dbf), GFP_KERNEL);
 	if (!dbf)
 		return -ENOMEM;
 
-	dbf->adapter = adapter;
-
+	spin_lock_init(&dbf->pay_lock);
 	spin_lock_init(&dbf->hba_lock);
 	spin_lock_init(&dbf->san_lock);
 	spin_lock_init(&dbf->scsi_lock);
 	spin_lock_init(&dbf->rec_lock);
 
 	/* debug feature area which records recovery activity */
-	sprintf(dbf_name, "zfcp_%s_rec", dev_name(&adapter->ccw_device->dev));
-	dbf->rec = zfcp_dbf_reg(dbf_name, 3, &zfcp_dbf_rec_view,
-				sizeof(struct zfcp_dbf_rec_record));
+	sprintf(name, "zfcp_%s_rec", dev_name(&adapter->ccw_device->dev));
+	dbf->rec = zfcp_dbf_reg(name, dbfsize, sizeof(struct zfcp_dbf_rec));
 	if (!dbf->rec)
 		goto err_out;
 
 	/* debug feature area which records HBA (FSF and QDIO) conditions */
-	sprintf(dbf_name, "zfcp_%s_hba", dev_name(&adapter->ccw_device->dev));
-	dbf->hba = zfcp_dbf_reg(dbf_name, 3, &zfcp_dbf_hba_view,
-				sizeof(struct zfcp_dbf_hba_record));
+	sprintf(name, "zfcp_%s_hba", dev_name(&adapter->ccw_device->dev));
+	dbf->hba = zfcp_dbf_reg(name, dbfsize, sizeof(struct zfcp_dbf_hba));
 	if (!dbf->hba)
 		goto err_out;
 
+	/* debug feature area which records payload info */
+	sprintf(name, "zfcp_%s_pay", dev_name(&adapter->ccw_device->dev));
+	dbf->pay = zfcp_dbf_reg(name, dbfsize * 2, sizeof(struct zfcp_dbf_pay));
+	if (!dbf->pay)
+		goto err_out;
+
 	/* debug feature area which records SAN command failures and recovery */
-	sprintf(dbf_name, "zfcp_%s_san", dev_name(&adapter->ccw_device->dev));
-	dbf->san = zfcp_dbf_reg(dbf_name, 6, &zfcp_dbf_san_view,
-				sizeof(struct zfcp_dbf_san_record));
+	sprintf(name, "zfcp_%s_san", dev_name(&adapter->ccw_device->dev));
+	dbf->san = zfcp_dbf_reg(name, dbfsize, sizeof(struct zfcp_dbf_san));
 	if (!dbf->san)
 		goto err_out;
 
 	/* debug feature area which records SCSI command failures and recovery */
-	sprintf(dbf_name, "zfcp_%s_scsi", dev_name(&adapter->ccw_device->dev));
-	dbf->scsi = zfcp_dbf_reg(dbf_name, 3, &zfcp_dbf_scsi_view,
-				 sizeof(struct zfcp_dbf_scsi_record));
+	sprintf(name, "zfcp_%s_scsi", dev_name(&adapter->ccw_device->dev));
+	dbf->scsi = zfcp_dbf_reg(name, dbfsize, sizeof(struct zfcp_dbf_scsi));
 	if (!dbf->scsi)
 		goto err_out;
 
 	adapter->dbf = dbf;
-	return 0;
 
+	return 0;
 err_out:
-	zfcp_dbf_adapter_unregister(dbf);
+	zfcp_dbf_unregister(dbf);
 	return -ENOMEM;
 }
 
 /**
  * zfcp_adapter_debug_unregister - unregisters debug feature for an adapter
- * @dbf: pointer to dbf for which debug features should be unregistered
+ * @adapter: pointer to adapter for which debug features should be unregistered
  */
-void zfcp_dbf_adapter_unregister(struct zfcp_dbf *dbf)
+void zfcp_dbf_adapter_unregister(struct zfcp_adapter *adapter)
 {
-	if (!dbf)
-		return;
-	debug_unregister(dbf->scsi);
-	debug_unregister(dbf->san);
-	debug_unregister(dbf->hba);
-	debug_unregister(dbf->rec);
-	dbf->adapter->dbf = NULL;
-	kfree(dbf);
+	struct zfcp_dbf *dbf = adapter->dbf;
+
+	adapter->dbf = NULL;
+	zfcp_dbf_unregister(dbf);
 }
 
diff --git a/drivers/s390/scsi/zfcp_dbf.h b/drivers/s390/scsi/zfcp_dbf.h
index 04081b1b62b..714f087eb7a 100644
--- a/drivers/s390/scsi/zfcp_dbf.h
+++ b/drivers/s390/scsi/zfcp_dbf.h
@@ -1,22 +1,8 @@
 /*
- * This file is part of the zfcp device driver for
- * FCP adapters for IBM System z9 and zSeries.
+ * zfcp device driver
+ * debug feature declarations
  *
- * Copyright IBM Corp. 2008, 2009
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * Copyright IBM Corp. 2008, 2010
  */
 
 #ifndef ZFCP_DBF_H
@@ -27,322 +13,350 @@
 #include "zfcp_fsf.h"
 #include "zfcp_def.h"
 
-#define ZFCP_DBF_TAG_SIZE      4
-#define ZFCP_DBF_ID_SIZE       7
+#define ZFCP_DBF_TAG_LEN       7
 
 #define ZFCP_DBF_INVALID_LUN	0xFFFFFFFFFFFFFFFFull
 
-struct zfcp_dbf_dump {
-	u8 tag[ZFCP_DBF_TAG_SIZE];
-	u32 total_size;		/* size of total dump data */
-	u32 offset;		/* how much data has being already dumped */
-	u32 size;		/* how much data comes with this record */
-	u8 data[];		/* dump data */
-} __attribute__ ((packed));
-
-struct zfcp_dbf_rec_record_thread {
-	u32 total;
+/**
+ * struct zfcp_dbf_rec_trigger - trace record for triggered recovery action
+ * @ready: number of ready recovery actions
+ * @running: number of running recovery actions
+ * @want: wanted recovery action
+ * @need: needed recovery action
+ */
+struct zfcp_dbf_rec_trigger {
 	u32 ready;
 	u32 running;
-};
-
-struct zfcp_dbf_rec_record_target {
-	u64 ref;
-	u32 status;
-	u32 d_id;
-	u64 wwpn;
-	u64 fcp_lun;
-	u32 erp_count;
-};
-
-struct zfcp_dbf_rec_record_trigger {
 	u8 want;
 	u8 need;
-	u32 as;
-	u32 ps;
-	u32 ls;
-	u64 ref;
-	u64 action;
-	u64 wwpn;
-	u64 fcp_lun;
-};
+} __packed;
 
-struct zfcp_dbf_rec_record_action {
-	u32 status;
-	u32 step;
-	u64 action;
-	u64 fsf_req;
+/**
+ * struct zfcp_dbf_rec_running - trace record for running recovery
+ * @fsf_req_id: request id for fsf requests
+ * @rec_status: status of the fsf request
+ * @rec_step: current step of the recovery action
+ * rec_count: recovery counter
+ */
+struct zfcp_dbf_rec_running {
+	u64 fsf_req_id;
+	u32 rec_status;
+	u16 rec_step;
+	u8 rec_action;
+	u8 rec_count;
+} __packed;
+
+/**
+ * enum zfcp_dbf_rec_id - recovery trace record id
+ * @ZFCP_DBF_REC_TRIG: triggered recovery identifier
+ * @ZFCP_DBF_REC_RUN: running recovery identifier
+ */
+enum zfcp_dbf_rec_id {
+	ZFCP_DBF_REC_TRIG	= 1,
+	ZFCP_DBF_REC_RUN	= 2,
 };
 
-struct zfcp_dbf_rec_record {
+/**
+ * struct zfcp_dbf_rec - trace record for error recovery actions
+ * @id: unique number of recovery record type
+ * @tag: identifier string specifying the location of initiation
+ * @lun: logical unit number
+ * @wwpn: word wide port number
+ * @d_id: destination ID
+ * @adapter_status: current status of the adapter
+ * @port_status: current status of the port
+ * @lun_status: current status of the lun
+ * @u.trig: structure zfcp_dbf_rec_trigger
+ * @u.run: structure zfcp_dbf_rec_running
+ */
+struct zfcp_dbf_rec {
 	u8 id;
-	char id2[7];
+	char tag[ZFCP_DBF_TAG_LEN];
+	u64 lun;
+	u64 wwpn;
+	u32 d_id;
+	u32 adapter_status;
+	u32 port_status;
+	u32 lun_status;
 	union {
-		struct zfcp_dbf_rec_record_action action;
-		struct zfcp_dbf_rec_record_thread thread;
-		struct zfcp_dbf_rec_record_target target;
-		struct zfcp_dbf_rec_record_trigger trigger;
+		struct zfcp_dbf_rec_trigger trig;
+		struct zfcp_dbf_rec_running run;
 	} u;
-};
+} __packed;
 
-enum {
-	ZFCP_REC_DBF_ID_ACTION,
-	ZFCP_REC_DBF_ID_THREAD,
-	ZFCP_REC_DBF_ID_TARGET,
-	ZFCP_REC_DBF_ID_TRIGGER,
+/**
+ * enum zfcp_dbf_san_id - SAN trace record identifier
+ * @ZFCP_DBF_SAN_REQ: request trace record id
+ * @ZFCP_DBF_SAN_RES: response trace record id
+ * @ZFCP_DBF_SAN_ELS: extended link service record id
+ */
+enum zfcp_dbf_san_id {
+	ZFCP_DBF_SAN_REQ	= 1,
+	ZFCP_DBF_SAN_RES	= 2,
+	ZFCP_DBF_SAN_ELS	= 3,
 };
 
-struct zfcp_dbf_hba_record_response {
-	u32 fsf_command;
-	u64 fsf_reqid;
-	u32 fsf_seqno;
-	u64 fsf_issued;
-	u32 fsf_prot_status;
+/** struct zfcp_dbf_san - trace record for SAN requests and responses
+ * @id: unique number of recovery record type
+ * @tag: identifier string specifying the location of initiation
+ * @fsf_req_id: request id for fsf requests
+ * @payload: unformatted information related to request/response
+ * @d_id: destination id
+ */
+struct zfcp_dbf_san {
+	u8 id;
+	char tag[ZFCP_DBF_TAG_LEN];
+	u64 fsf_req_id;
+	u32 d_id;
+#define ZFCP_DBF_SAN_MAX_PAYLOAD (FC_CT_HDR_LEN + 32)
+	char payload[ZFCP_DBF_SAN_MAX_PAYLOAD];
+} __packed;
+
+/**
+ * struct zfcp_dbf_hba_res - trace record for hba responses
+ * @req_issued: timestamp when request was issued
+ * @prot_status: protocol status
+ * @prot_status_qual: protocol status qualifier
+ * @fsf_status: fsf status
+ * @fsf_status_qual: fsf status qualifier
+ */
+struct zfcp_dbf_hba_res {
+	u64 req_issued;
+	u32 prot_status;
+	u8  prot_status_qual[FSF_PROT_STATUS_QUAL_SIZE];
 	u32 fsf_status;
-	u8 fsf_prot_status_qual[FSF_PROT_STATUS_QUAL_SIZE];
-	u8 fsf_status_qual[FSF_STATUS_QUALIFIER_SIZE];
-	u32 fsf_req_status;
-	u8 sbal_first;
-	u8 sbal_last;
-	u8 sbal_response;
-	u8 pool;
-	u64 erp_action;
-	union {
-		struct {
-			u64 cmnd;
-			u32 data_dir;
-		} fcp;
-		struct {
-			u64 wwpn;
-			u32 d_id;
-			u32 port_handle;
-		} port;
-		struct {
-			u64 wwpn;
-			u64 fcp_lun;
-			u32 port_handle;
-			u32 lun_handle;
-		} unit;
-		struct {
-			u32 d_id;
-		} els;
-	} u;
-} __attribute__ ((packed));
+	u8  fsf_status_qual[FSF_STATUS_QUALIFIER_SIZE];
+} __packed;
 
-struct zfcp_dbf_hba_record_status {
-	u8 failed;
+/**
+ * struct zfcp_dbf_hba_uss - trace record for unsolicited status
+ * @status_type: type of unsolicited status
+ * @status_subtype: subtype of unsolicited status
+ * @d_id: destination ID
+ * @lun: logical unit number
+ * @queue_designator: queue designator
+ */
+struct zfcp_dbf_hba_uss {
 	u32 status_type;
 	u32 status_subtype;
-	struct fsf_queue_designator
-	 queue_designator;
-	u32 payload_size;
-#define ZFCP_DBF_UNSOL_PAYLOAD				80
-#define ZFCP_DBF_UNSOL_PAYLOAD_SENSE_DATA_AVAIL		32
-#define ZFCP_DBF_UNSOL_PAYLOAD_BIT_ERROR_THRESHOLD	56
-#define ZFCP_DBF_UNSOL_PAYLOAD_FEATURE_UPDATE_ALERT	2 * sizeof(u32)
-	u8 payload[ZFCP_DBF_UNSOL_PAYLOAD];
-} __attribute__ ((packed));
-
-struct zfcp_dbf_hba_record_qdio {
-	u32 qdio_error;
-	u8 sbal_index;
-	u8 sbal_count;
-} __attribute__ ((packed));
-
-struct zfcp_dbf_hba_record {
-	u8 tag[ZFCP_DBF_TAG_SIZE];
-	u8 tag2[ZFCP_DBF_TAG_SIZE];
-	union {
-		struct zfcp_dbf_hba_record_response response;
-		struct zfcp_dbf_hba_record_status status;
-		struct zfcp_dbf_hba_record_qdio qdio;
-		struct fsf_bit_error_payload berr;
-	} u;
-} __attribute__ ((packed));
-
-struct zfcp_dbf_san_record_ct_request {
-	u16 cmd_req_code;
-	u8 revision;
-	u8 gs_type;
-	u8 gs_subtype;
-	u8 options;
-	u16 max_res_size;
-	u32 len;
-	u32 d_id;
-} __attribute__ ((packed));
-
-struct zfcp_dbf_san_record_ct_response {
-	u16 cmd_rsp_code;
-	u8 revision;
-	u8 reason_code;
-	u8 expl;
-	u8 vendor_unique;
-	u16 max_res_size;
-	u32 len;
-} __attribute__ ((packed));
-
-struct zfcp_dbf_san_record_els {
 	u32 d_id;
-} __attribute__ ((packed));
+	u64 lun;
+	u64 queue_designator;
+} __packed;
 
-struct zfcp_dbf_san_record {
-	u8 tag[ZFCP_DBF_TAG_SIZE];
-	u64 fsf_reqid;
-	u32 fsf_seqno;
+/**
+ * enum zfcp_dbf_hba_id - HBA trace record identifier
+ * @ZFCP_DBF_HBA_RES: response trace record
+ * @ZFCP_DBF_HBA_USS: unsolicited status trace record
+ * @ZFCP_DBF_HBA_BIT: bit error trace record
+ */
+enum zfcp_dbf_hba_id {
+	ZFCP_DBF_HBA_RES	= 1,
+	ZFCP_DBF_HBA_USS	= 2,
+	ZFCP_DBF_HBA_BIT	= 3,
+};
+
+/**
+ * struct zfcp_dbf_hba - common trace record for HBA records
+ * @id: unique number of recovery record type
+ * @tag: identifier string specifying the location of initiation
+ * @fsf_req_id: request id for fsf requests
+ * @fsf_req_status: status of fsf request
+ * @fsf_cmd: fsf command
+ * @fsf_seq_no: fsf sequence number
+ * @pl_len: length of payload stored as zfcp_dbf_pay
+ * @u: record type specific data
+ */
+struct zfcp_dbf_hba {
+	u8 id;
+	char tag[ZFCP_DBF_TAG_LEN];
+	u64 fsf_req_id;
+	u32 fsf_req_status;
+	u32 fsf_cmd;
+	u32 fsf_seq_no;
+	u16 pl_len;
 	union {
-		struct zfcp_dbf_san_record_ct_request ct_req;
-		struct zfcp_dbf_san_record_ct_response ct_resp;
-		struct zfcp_dbf_san_record_els els;
+		struct zfcp_dbf_hba_res res;
+		struct zfcp_dbf_hba_uss uss;
+		struct fsf_bit_error_payload be;
 	} u;
-} __attribute__ ((packed));
+} __packed;
 
-#define ZFCP_DBF_SAN_MAX_PAYLOAD 1024
+/**
+ * enum zfcp_dbf_scsi_id - scsi trace record identifier
+ * @ZFCP_DBF_SCSI_CMND: scsi command trace record
+ */
+enum zfcp_dbf_scsi_id {
+	ZFCP_DBF_SCSI_CMND	= 1,
+};
 
-struct zfcp_dbf_scsi_record {
-	u8 tag[ZFCP_DBF_TAG_SIZE];
-	u8 tag2[ZFCP_DBF_TAG_SIZE];
+/**
+ * struct zfcp_dbf_scsi - common trace record for SCSI records
+ * @id: unique number of recovery record type
+ * @tag: identifier string specifying the location of initiation
+ * @scsi_id: scsi device id
+ * @scsi_lun: scsi device logical unit number
+ * @scsi_result: scsi result
+ * @scsi_retries: current retry number of scsi request
+ * @scsi_allowed: allowed retries
+ * @fcp_rsp_info: FCP response info
+ * @scsi_opcode: scsi opcode
+ * @fsf_req_id: request id of fsf request
+ * @host_scribble: LLD specific data attached to SCSI request
+ * @pl_len: length of paload stored as zfcp_dbf_pay
+ * @fsf_rsp: response for fsf request
+ */
+struct zfcp_dbf_scsi {
+	u8 id;
+	char tag[ZFCP_DBF_TAG_LEN];
 	u32 scsi_id;
 	u32 scsi_lun;
 	u32 scsi_result;
-	u64 scsi_cmnd;
-#define ZFCP_DBF_SCSI_OPCODE	16
-	u8 scsi_opcode[ZFCP_DBF_SCSI_OPCODE];
 	u8 scsi_retries;
 	u8 scsi_allowed;
-	u64 fsf_reqid;
-	u32 fsf_seqno;
-	u64 fsf_issued;
-	u64 old_fsf_reqid;
-	u8 rsp_validity;
-	u8 rsp_scsi_status;
-	u32 rsp_resid;
-	u8 rsp_code;
-#define ZFCP_DBF_SCSI_FCP_SNS_INFO	16
-#define ZFCP_DBF_SCSI_MAX_FCP_SNS_INFO	256
-	u32 sns_info_len;
-	u8 sns_info[ZFCP_DBF_SCSI_FCP_SNS_INFO];
-} __attribute__ ((packed));
+	u8 fcp_rsp_info;
+#define ZFCP_DBF_SCSI_OPCODE	16
+	u8 scsi_opcode[ZFCP_DBF_SCSI_OPCODE];
+	u64 fsf_req_id;
+	u64 host_scribble;
+	u16 pl_len;
+	struct fcp_resp_with_ext fcp_rsp;
+} __packed;
 
+/**
+ * struct zfcp_dbf_pay - trace record for unformatted payload information
+ * @area: area this record is originated from
+ * @counter: ascending record number
+ * @fsf_req_id: request id of fsf request
+ * @data: unformatted data
+ */
+struct zfcp_dbf_pay {
+	u8 counter;
+	char area[ZFCP_DBF_TAG_LEN];
+	u64 fsf_req_id;
+#define ZFCP_DBF_PAY_MAX_REC 0x100
+	char data[ZFCP_DBF_PAY_MAX_REC];
+} __packed;
+
+/**
+ * struct zfcp_dbf - main dbf trace structure
+ * @pay: reference to payload trace area
+ * @rec: reference to recovery trace area
+ * @hba: reference to hba trace area
+ * @san: reference to san trace area
+ * @scsi: reference to scsi trace area
+ * @pay_lock: lock protecting payload trace buffer
+ * @rec_lock: lock protecting recovery trace buffer
+ * @hba_lock: lock protecting hba trace buffer
+ * @san_lock: lock protecting san trace buffer
+ * @scsi_lock: lock protecting scsi trace buffer
+ * @pay_buf: pre-allocated buffer for payload
+ * @rec_buf: pre-allocated buffer for recovery
+ * @hba_buf: pre-allocated buffer for hba
+ * @san_buf: pre-allocated buffer for san
+ * @scsi_buf: pre-allocated buffer for scsi
+ */
 struct zfcp_dbf {
+	debug_info_t			*pay;
 	debug_info_t			*rec;
 	debug_info_t			*hba;
 	debug_info_t			*san;
 	debug_info_t			*scsi;
+	spinlock_t			pay_lock;
 	spinlock_t			rec_lock;
 	spinlock_t			hba_lock;
 	spinlock_t			san_lock;
 	spinlock_t			scsi_lock;
-	struct zfcp_dbf_rec_record	rec_buf;
-	struct zfcp_dbf_hba_record	hba_buf;
-	struct zfcp_dbf_san_record	san_buf;
-	struct zfcp_dbf_scsi_record	scsi_buf;
-	struct zfcp_adapter		*adapter;
+	struct zfcp_dbf_pay		pay_buf;
+	struct zfcp_dbf_rec		rec_buf;
+	struct zfcp_dbf_hba		hba_buf;
+	struct zfcp_dbf_san		san_buf;
+	struct zfcp_dbf_scsi		scsi_buf;
 };
 
 static inline
-void zfcp_dbf_hba_fsf_resp(const char *tag2, int level,
-			   struct zfcp_fsf_req *req, struct zfcp_dbf *dbf)
+void zfcp_dbf_hba_fsf_resp(char *tag, int level, struct zfcp_fsf_req *req)
 {
-	if (level <= dbf->hba->level)
-		_zfcp_dbf_hba_fsf_response(tag2, level, req, dbf);
+	if (level <= req->adapter->dbf->hba->level)
+		zfcp_dbf_hba_fsf_res(tag, req);
 }
 
 /**
  * zfcp_dbf_hba_fsf_response - trace event for request completion
- * @fsf_req: request that has been completed
+ * @req: request that has been completed
  */
-static inline void zfcp_dbf_hba_fsf_response(struct zfcp_fsf_req *req)
+static inline
+void zfcp_dbf_hba_fsf_response(struct zfcp_fsf_req *req)
 {
-	struct zfcp_dbf *dbf = req->adapter->dbf;
 	struct fsf_qtcb *qtcb = req->qtcb;
 
 	if ((qtcb->prefix.prot_status != FSF_PROT_GOOD) &&
 	    (qtcb->prefix.prot_status != FSF_PROT_FSF_STATUS_PRESENTED)) {
-		zfcp_dbf_hba_fsf_resp("perr", 1, req, dbf);
+		zfcp_dbf_hba_fsf_resp("fs_perr", 1, req);
 
 	} else if (qtcb->header.fsf_status != FSF_GOOD) {
-		zfcp_dbf_hba_fsf_resp("ferr", 1, req, dbf);
+		zfcp_dbf_hba_fsf_resp("fs_ferr", 1, req);
 
 	} else if ((req->fsf_command == FSF_QTCB_OPEN_PORT_WITH_DID) ||
 		   (req->fsf_command == FSF_QTCB_OPEN_LUN)) {
-		zfcp_dbf_hba_fsf_resp("open", 4, req, dbf);
+		zfcp_dbf_hba_fsf_resp("fs_open", 4, req);
 
 	} else if (qtcb->header.log_length) {
-		zfcp_dbf_hba_fsf_resp("qtcb", 5, req, dbf);
+		zfcp_dbf_hba_fsf_resp("fs_qtcb", 5, req);
 
 	} else {
-		zfcp_dbf_hba_fsf_resp("norm", 6, req, dbf);
+		zfcp_dbf_hba_fsf_resp("fs_norm", 6, req);
 	}
- }
-
-/**
- * zfcp_dbf_hba_fsf_unsol - trace event for an unsolicited status buffer
- * @tag: tag indicating which kind of unsolicited status has been received
- * @dbf: reference to dbf structure
- * @status_buffer: buffer containing payload of unsolicited status
- */
-static inline
-void zfcp_dbf_hba_fsf_unsol(const char *tag, struct zfcp_dbf *dbf,
-			    struct fsf_status_read_buffer *buf)
-{
-	int level = 2;
-
-	if (level <= dbf->hba->level)
-		_zfcp_dbf_hba_fsf_unsol(tag, level, dbf, buf);
 }
 
 static inline
-void zfcp_dbf_scsi(const char *tag, const char *tag2, int level,
-		   struct zfcp_dbf *dbf, struct scsi_cmnd *scmd,
-		   struct zfcp_fsf_req *req, unsigned long old_id)
+void _zfcp_dbf_scsi(char *tag, int level, struct scsi_cmnd *scmd,
+		   struct zfcp_fsf_req *req)
 {
-	if (level <= dbf->scsi->level)
-		_zfcp_dbf_scsi(tag, tag2, level, dbf, scmd, req, old_id);
+	struct zfcp_adapter *adapter = (struct zfcp_adapter *)
+					scmd->device->host->hostdata[0];
+
+	if (level <= adapter->dbf->scsi->level)
+		zfcp_dbf_scsi(tag, scmd, req);
 }
 
 /**
  * zfcp_dbf_scsi_result - trace event for SCSI command completion
- * @dbf: adapter dbf trace
  * @scmd: SCSI command pointer
  * @req: FSF request used to issue SCSI command
  */
 static inline
-void zfcp_dbf_scsi_result(struct zfcp_dbf *dbf, struct scsi_cmnd *scmd,
-			  struct zfcp_fsf_req *req)
+void zfcp_dbf_scsi_result(struct scsi_cmnd *scmd, struct zfcp_fsf_req *req)
 {
 	if (scmd->result != 0)
-		zfcp_dbf_scsi("rslt", "erro", 3, dbf, scmd, req, 0);
+		_zfcp_dbf_scsi("rsl_err", 3, scmd, req);
 	else if (scmd->retries > 0)
-		zfcp_dbf_scsi("rslt", "retr", 4, dbf, scmd, req, 0);
+		_zfcp_dbf_scsi("rsl_ret", 4, scmd, req);
 	else
-		zfcp_dbf_scsi("rslt", "norm", 6, dbf, scmd, req, 0);
+		_zfcp_dbf_scsi("rsl_nor", 6, scmd, req);
 }
 
 /**
  * zfcp_dbf_scsi_fail_send - trace event for failure to send SCSI command
- * @dbf: adapter dbf trace
  * @scmd: SCSI command pointer
  */
 static inline
-void zfcp_dbf_scsi_fail_send(struct zfcp_dbf *dbf, struct scsi_cmnd *scmd)
+void zfcp_dbf_scsi_fail_send(struct scsi_cmnd *scmd)
 {
-	zfcp_dbf_scsi("rslt", "fail", 4, dbf, scmd, NULL, 0);
+	_zfcp_dbf_scsi("rsl_fai", 4, scmd, NULL);
 }
 
 /**
  * zfcp_dbf_scsi_abort - trace event for SCSI command abort
  * @tag: tag indicating success or failure of abort operation
- * @adapter: adapter thas has been used to issue SCSI command to be aborted
  * @scmd: SCSI command to be aborted
- * @new_req: request containing abort (might be NULL)
- * @old_id: identifier of request containg SCSI command to be aborted
+ * @fsf_req: request containing abort (might be NULL)
  */
 static inline
-void zfcp_dbf_scsi_abort(const char *tag, struct zfcp_dbf *dbf,
-			 struct scsi_cmnd *scmd, struct zfcp_fsf_req *new_req,
-			 unsigned long old_id)
+void zfcp_dbf_scsi_abort(char *tag, struct scsi_cmnd *scmd,
+			 struct zfcp_fsf_req *fsf_req)
 {
-	zfcp_dbf_scsi("abrt", tag, 1, dbf, scmd, new_req, old_id);
+	_zfcp_dbf_scsi(tag, 1, scmd, fsf_req);
 }
 
 /**
@@ -352,12 +366,17 @@ void zfcp_dbf_scsi_abort(const char *tag, struct zfcp_dbf *dbf,
  * @flag: indicates type of reset (Target Reset, Logical Unit Reset)
  */
 static inline
-void zfcp_dbf_scsi_devreset(const char *tag, struct scsi_cmnd *scmnd, u8 flag)
+void zfcp_dbf_scsi_devreset(char *tag, struct scsi_cmnd *scmnd, u8 flag)
 {
-	struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scmnd->device);
+	char tmp_tag[ZFCP_DBF_TAG_LEN];
+
+	if (flag == FCP_TMF_TGT_RESET)
+		memcpy(tmp_tag, "tr_", 3);
+	else
+		memcpy(tmp_tag, "lr_", 3);
 
-	zfcp_dbf_scsi(flag == FCP_TMF_TGT_RESET ? "trst" : "lrst", tag, 1,
-		      zfcp_sdev->port->adapter->dbf, scmnd, NULL, 0);
+	memcpy(&tmp_tag[3], tag, 4);
+	_zfcp_dbf_scsi(tmp_tag, 1, scmnd, NULL);
 }
 
 #endif /* ZFCP_DBF_H */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index d37c7331f24..e003e306f87 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -76,9 +76,9 @@ static void zfcp_erp_action_ready(struct zfcp_erp_action *act)
 	struct zfcp_adapter *adapter = act->adapter;
 
 	list_move(&act->list, &act->adapter->erp_ready_head);
-	zfcp_dbf_rec_action("erardy1", act);
+	zfcp_dbf_rec_run("erardy1", act);
 	wake_up(&adapter->erp_ready_wq);
-	zfcp_dbf_rec_thread("erardy2", adapter->dbf);
+	zfcp_dbf_rec_run("erardy2", act);
 }
 
 static void zfcp_erp_action_dismiss(struct zfcp_erp_action *act)
@@ -156,6 +156,8 @@ static int zfcp_erp_required_act(int want, struct zfcp_adapter *adapter,
 		if (!(a_status & ZFCP_STATUS_COMMON_RUNNING) ||
 		      a_status & ZFCP_STATUS_COMMON_ERP_FAILED)
 			return 0;
+		if (p_status & ZFCP_STATUS_COMMON_NOESC)
+			return need;
 		if (!(a_status & ZFCP_STATUS_COMMON_UNBLOCKED))
 			need = ZFCP_ERP_ACTION_REOPEN_ADAPTER;
 		/* fall through */
@@ -188,6 +190,9 @@ static struct zfcp_erp_action *zfcp_erp_setup_act(int need, u32 act_status,
 		atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE,
 				&zfcp_sdev->status);
 		erp_action = &zfcp_sdev->erp_action;
+		memset(erp_action, 0, sizeof(struct zfcp_erp_action));
+		erp_action->port = port;
+		erp_action->sdev = sdev;
 		if (!(atomic_read(&zfcp_sdev->status) &
 		      ZFCP_STATUS_COMMON_RUNNING))
 			act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
@@ -200,6 +205,8 @@ static struct zfcp_erp_action *zfcp_erp_setup_act(int need, u32 act_status,
 		zfcp_erp_action_dismiss_port(port);
 		atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &port->status);
 		erp_action = &port->erp_action;
+		memset(erp_action, 0, sizeof(struct zfcp_erp_action));
+		erp_action->port = port;
 		if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_RUNNING))
 			act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
 		break;
@@ -209,6 +216,7 @@ static struct zfcp_erp_action *zfcp_erp_setup_act(int need, u32 act_status,
 		zfcp_erp_action_dismiss_adapter(adapter);
 		atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &adapter->status);
 		erp_action = &adapter->erp_action;
+		memset(erp_action, 0, sizeof(struct zfcp_erp_action));
 		if (!(atomic_read(&adapter->status) &
 		      ZFCP_STATUS_COMMON_RUNNING))
 			act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
@@ -218,10 +226,7 @@ static struct zfcp_erp_action *zfcp_erp_setup_act(int need, u32 act_status,
 		return NULL;
 	}
 
-	memset(erp_action, 0, sizeof(struct zfcp_erp_action));
 	erp_action->adapter = adapter;
-	erp_action->port = port;
-	erp_action->sdev = sdev;
 	erp_action->action = need;
 	erp_action->status = act_status;
 
@@ -231,10 +236,10 @@ static struct zfcp_erp_action *zfcp_erp_setup_act(int need, u32 act_status,
 static int zfcp_erp_action_enqueue(int want, struct zfcp_adapter *adapter,
 				   struct zfcp_port *port,
 				   struct scsi_device *sdev,
-				   char *id, void *ref, u32 act_status)
+				   char *id, u32 act_status)
 {
 	int retval = 1, need;
-	struct zfcp_erp_action *act = NULL;
+	struct zfcp_erp_action *act;
 
 	if (!adapter->erp_thread)
 		return -EIO;
@@ -250,15 +255,14 @@ static int zfcp_erp_action_enqueue(int want, struct zfcp_adapter *adapter,
 	++adapter->erp_total_count;
 	list_add_tail(&act->list, &adapter->erp_ready_head);
 	wake_up(&adapter->erp_ready_wq);
-	zfcp_dbf_rec_thread("eracte1", adapter->dbf);
 	retval = 0;
  out:
-	zfcp_dbf_rec_trigger(id, ref, want, need, act, adapter, port, sdev);
+	zfcp_dbf_rec_trig(id, adapter, port, sdev, want, need);
 	return retval;
 }
 
 static int _zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter,
-				    int clear_mask, char *id, void *ref)
+				    int clear_mask, char *id)
 {
 	zfcp_erp_adapter_block(adapter, clear_mask);
 	zfcp_scsi_schedule_rports_block(adapter);
@@ -270,7 +274,7 @@ static int _zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter,
 		return -EIO;
 	}
 	return zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_ADAPTER,
-				       adapter, NULL, NULL, id, ref, 0);
+				       adapter, NULL, NULL, id, 0);
 }
 
 /**
@@ -278,10 +282,8 @@ static int _zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter,
  * @adapter: Adapter to reopen.
  * @clear: Status flags to clear.
  * @id: Id for debug trace event.
- * @ref: Reference for debug trace event.
  */
-void zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter, int clear,
-			     char *id, void *ref)
+void zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter, int clear, char *id)
 {
 	unsigned long flags;
 
@@ -294,7 +296,7 @@ void zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter, int clear,
 					    ZFCP_STATUS_COMMON_ERP_FAILED);
 	else
 		zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_ADAPTER, adapter,
-					NULL, NULL, id, ref, 0);
+					NULL, NULL, id, 0);
 	write_unlock_irqrestore(&adapter->erp_lock, flags);
 }
 
@@ -303,13 +305,12 @@ void zfcp_erp_adapter_reopen(struct zfcp_adapter *adapter, int clear,
  * @adapter: Adapter to shut down.
  * @clear: Status flags to clear.
  * @id: Id for debug trace event.
- * @ref: Reference for debug trace event.
  */
 void zfcp_erp_adapter_shutdown(struct zfcp_adapter *adapter, int clear,
-			       char *id, void *ref)
+			       char *id)
 {
 	int flags = ZFCP_STATUS_COMMON_RUNNING | ZFCP_STATUS_COMMON_ERP_FAILED;
-	zfcp_erp_adapter_reopen(adapter, clear | flags, id, ref);
+	zfcp_erp_adapter_reopen(adapter, clear | flags, id);
 }
 
 /**
@@ -317,13 +318,11 @@ void zfcp_erp_adapter_shutdown(struct zfcp_adapter *adapter, int clear,
  * @port: Port to shut down.
  * @clear: Status flags to clear.
  * @id: Id for debug trace event.
- * @ref: Reference for debug trace event.
  */
-void zfcp_erp_port_shutdown(struct zfcp_port *port, int clear, char *id,
-			    void *ref)
+void zfcp_erp_port_shutdown(struct zfcp_port *port, int clear, char *id)
 {
 	int flags = ZFCP_STATUS_COMMON_RUNNING | ZFCP_STATUS_COMMON_ERP_FAILED;
-	zfcp_erp_port_reopen(port, clear | flags, id, ref);
+	zfcp_erp_port_reopen(port, clear | flags, id);
 }
 
 static void zfcp_erp_port_block(struct zfcp_port *port, int clear)
@@ -332,8 +331,8 @@ static void zfcp_erp_port_block(struct zfcp_port *port, int clear)
 				    ZFCP_STATUS_COMMON_UNBLOCKED | clear);
 }
 
-static void _zfcp_erp_port_forced_reopen(struct zfcp_port *port,
-					 int clear, char *id, void *ref)
+static void _zfcp_erp_port_forced_reopen(struct zfcp_port *port, int clear,
+					 char *id)
 {
 	zfcp_erp_port_block(port, clear);
 	zfcp_scsi_schedule_rport_block(port);
@@ -342,28 +341,26 @@ static void _zfcp_erp_port_forced_reopen(struct zfcp_port *port,
 		return;
 
 	zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_PORT_FORCED,
-				port->adapter, port, NULL, id, ref, 0);
+				port->adapter, port, NULL, id, 0);
 }
 
 /**
  * zfcp_erp_port_forced_reopen - Forced close of port and open again
  * @port: Port to force close and to reopen.
+ * @clear: Status flags to clear.
  * @id: Id for debug trace event.
- * @ref: Reference for debug trace event.
  */
-void zfcp_erp_port_forced_reopen(struct zfcp_port *port, int clear, char *id,
-				 void *ref)
+void zfcp_erp_port_forced_reopen(struct zfcp_port *port, int clear, char *id)
 {
 	unsigned long flags;
 	struct zfcp_adapter *adapter = port->adapter;
 
 	write_lock_irqsave(&adapter->erp_lock, flags);
-	_zfcp_erp_port_forced_reopen(port, clear, id, ref);
+	_zfcp_erp_port_forced_reopen(port, clear, id);
 	write_unlock_irqrestore(&adapter->erp_lock, flags);
 }
 
-static int _zfcp_erp_port_reopen(struct zfcp_port *port, int clear, char *id,
-				 void *ref)
+static int _zfcp_erp_port_reopen(struct zfcp_port *port, int clear, char *id)
 {
 	zfcp_erp_port_block(port, clear);
 	zfcp_scsi_schedule_rport_block(port);
@@ -375,24 +372,25 @@ static int _zfcp_erp_port_reopen(struct zfcp_port *port, int clear, char *id,
 	}
 
 	return zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_PORT,
-				       port->adapter, port, NULL, id, ref, 0);
+				       port->adapter, port, NULL, id, 0);
 }
 
 /**
  * zfcp_erp_port_reopen - trigger remote port recovery
  * @port: port to recover
  * @clear_mask: flags in port status to be cleared
+ * @id: Id for debug trace event.
  *
  * Returns 0 if recovery has been triggered, < 0 if not.
  */
-int zfcp_erp_port_reopen(struct zfcp_port *port, int clear, char *id, void *ref)
+int zfcp_erp_port_reopen(struct zfcp_port *port, int clear, char *id)
 {
 	int retval;
 	unsigned long flags;
 	struct zfcp_adapter *adapter = port->adapter;
 
 	write_lock_irqsave(&adapter->erp_lock, flags);
-	retval = _zfcp_erp_port_reopen(port, clear, id, ref);
+	retval = _zfcp_erp_port_reopen(port, clear, id);
 	write_unlock_irqrestore(&adapter->erp_lock, flags);
 
 	return retval;
@@ -405,7 +403,7 @@ static void zfcp_erp_lun_block(struct scsi_device *sdev, int clear_mask)
 }
 
 static void _zfcp_erp_lun_reopen(struct scsi_device *sdev, int clear, char *id,
-				 void *ref, u32 act_status)
+				 u32 act_status)
 {
 	struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
 	struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
@@ -416,17 +414,18 @@ static void _zfcp_erp_lun_reopen(struct scsi_device *sdev, int clear, char *id,
 		return;
 
 	zfcp_erp_action_enqueue(ZFCP_ERP_ACTION_REOPEN_LUN, adapter,
-				zfcp_sdev->port, sdev, id, ref, act_status);
+				zfcp_sdev->port, sdev, id, act_status);
 }
 
 /**
  * zfcp_erp_lun_reopen - initiate reopen of a LUN
  * @sdev: SCSI device / LUN to be reopened
  * @clear_mask: specifies flags in LUN status to be cleared
+ * @id: Id for debug trace event.
+ *
  * Return: 0 on success, < 0 on error
  */
-void zfcp_erp_lun_reopen(struct scsi_device *sdev, int clear, char *id,
-			 void *ref)
+void zfcp_erp_lun_reopen(struct scsi_device *sdev, int clear, char *id)
 {
 	unsigned long flags;
 	struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
@@ -434,7 +433,7 @@ void zfcp_erp_lun_reopen(struct scsi_device *sdev, int clear, char *id,
 	struct zfcp_adapter *adapter = port->adapter;
 
 	write_lock_irqsave(&adapter->erp_lock, flags);
-	_zfcp_erp_lun_reopen(sdev, clear, id, ref, 0);
+	_zfcp_erp_lun_reopen(sdev, clear, id, 0);
 	write_unlock_irqrestore(&adapter->erp_lock, flags);
 }
 
@@ -443,13 +442,11 @@ void zfcp_erp_lun_reopen(struct scsi_device *sdev, int clear, char *id,
  * @sdev: SCSI device / LUN to shut down.
  * @clear: Status flags to clear.
  * @id: Id for debug trace event.
- * @ref: Reference for debug trace event.
  */
-void zfcp_erp_lun_shutdown(struct scsi_device *sdev, int clear, char *id,
-			   void *ref)
+void zfcp_erp_lun_shutdown(struct scsi_device *sdev, int clear, char *id)
 {
 	int flags = ZFCP_STATUS_COMMON_RUNNING | ZFCP_STATUS_COMMON_ERP_FAILED;
-	zfcp_erp_lun_reopen(sdev, clear | flags, id, ref);
+	zfcp_erp_lun_reopen(sdev, clear | flags, id);
 }
 
 /**
@@ -471,7 +468,7 @@ void zfcp_erp_lun_shutdown_wait(struct scsi_device *sdev, char *id)
 	int clear = ZFCP_STATUS_COMMON_RUNNING | ZFCP_STATUS_COMMON_ERP_FAILED;
 
 	write_lock_irqsave(&adapter->erp_lock, flags);
-	_zfcp_erp_lun_reopen(sdev, clear, id, NULL, ZFCP_STATUS_ERP_NO_REF);
+	_zfcp_erp_lun_reopen(sdev, clear, id, ZFCP_STATUS_ERP_NO_REF);
 	write_unlock_irqrestore(&adapter->erp_lock, flags);
 
 	zfcp_erp_wait(adapter);
@@ -485,14 +482,14 @@ static int status_change_set(unsigned long mask, atomic_t *status)
 static void zfcp_erp_adapter_unblock(struct zfcp_adapter *adapter)
 {
 	if (status_change_set(ZFCP_STATUS_COMMON_UNBLOCKED, &adapter->status))
-		zfcp_dbf_rec_adapter("eraubl1", NULL, adapter->dbf);
+		zfcp_dbf_rec_run("eraubl1", &adapter->erp_action);
 	atomic_set_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &adapter->status);
 }
 
 static void zfcp_erp_port_unblock(struct zfcp_port *port)
 {
 	if (status_change_set(ZFCP_STATUS_COMMON_UNBLOCKED, &port->status))
-		zfcp_dbf_rec_port("erpubl1", NULL, port);
+		zfcp_dbf_rec_run("erpubl1", &port->erp_action);
 	atomic_set_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &port->status);
 }
 
@@ -501,14 +498,14 @@ static void zfcp_erp_lun_unblock(struct scsi_device *sdev)
 	struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
 
 	if (status_change_set(ZFCP_STATUS_COMMON_UNBLOCKED, &zfcp_sdev->status))
-		zfcp_dbf_rec_lun("erlubl1", NULL, sdev);
+		zfcp_dbf_rec_run("erlubl1", &sdev_to_zfcp(sdev)->erp_action);
 	atomic_set_mask(ZFCP_STATUS_COMMON_UNBLOCKED, &zfcp_sdev->status);
 }
 
 static void zfcp_erp_action_to_running(struct zfcp_erp_action *erp_action)
 {
 	list_move(&erp_action->list, &erp_action->adapter->erp_running_head);
-	zfcp_dbf_rec_action("erator1", erp_action);
+	zfcp_dbf_rec_run("erator1", erp_action);
 }
 
 static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act)
@@ -525,11 +522,11 @@ static void zfcp_erp_strategy_check_fsfreq(struct zfcp_erp_action *act)
 		if (act->status & (ZFCP_STATUS_ERP_DISMISSED |
 				   ZFCP_STATUS_ERP_TIMEDOUT)) {
 			req->status |= ZFCP_STATUS_FSFREQ_DISMISSED;
-			zfcp_dbf_rec_action("erscf_1", act);
+			zfcp_dbf_rec_run("erscf_1", act);
 			req->erp_action = NULL;
 		}
 		if (act->status & ZFCP_STATUS_ERP_TIMEDOUT)
-			zfcp_dbf_rec_action("erscf_2", act);
+			zfcp_dbf_rec_run("erscf_2", act);
 		if (req->status & ZFCP_STATUS_FSFREQ_DISMISSED)
 			act->fsf_req_id = 0;
 	} else
@@ -580,40 +577,40 @@ static void zfcp_erp_strategy_memwait(struct zfcp_erp_action *erp_action)
 }
 
 static void _zfcp_erp_port_reopen_all(struct zfcp_adapter *adapter,
-				      int clear, char *id, void *ref)
+				      int clear, char *id)
 {
 	struct zfcp_port *port;
 
 	read_lock(&adapter->port_list_lock);
 	list_for_each_entry(port, &adapter->port_list, list)
-		_zfcp_erp_port_reopen(port, clear, id, ref);
+		_zfcp_erp_port_reopen(port, clear, id);
 	read_unlock(&adapter->port_list_lock);
 }
 
 static void _zfcp_erp_lun_reopen_all(struct zfcp_port *port, int clear,
-				     char *id, void *ref)
+				     char *id)
 {
 	struct scsi_device *sdev;
 
 	shost_for_each_device(sdev, port->adapter->scsi_host)
 		if (sdev_to_zfcp(sdev)->port == port)
-			_zfcp_erp_lun_reopen(sdev, clear, id, ref, 0);
+			_zfcp_erp_lun_reopen(sdev, clear, id, 0);
 }
 
 static void zfcp_erp_strategy_followup_failed(struct zfcp_erp_action *act)
 {
 	switch (act->action) {
 	case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
-		_zfcp_erp_adapter_reopen(act->adapter, 0, "ersff_1", NULL);
+		_zfcp_erp_adapter_reopen(act->adapter, 0, "ersff_1");
 		break;
 	case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
-		_zfcp_erp_port_forced_reopen(act->port, 0, "ersff_2", NULL);
+		_zfcp_erp_port_forced_reopen(act->port, 0, "ersff_2");
 		break;
 	case ZFCP_ERP_ACTION_REOPEN_PORT:
-		_zfcp_erp_port_reopen(act->port, 0, "ersff_3", NULL);
+		_zfcp_erp_port_reopen(act->port, 0, "ersff_3");
 		break;
 	case ZFCP_ERP_ACTION_REOPEN_LUN:
-		_zfcp_erp_lun_reopen(act->sdev, 0, "ersff_4", NULL, 0);
+		_zfcp_erp_lun_reopen(act->sdev, 0, "ersff_4", 0);
 		break;
 	}
 }
@@ -622,13 +619,13 @@ static void zfcp_erp_strategy_followup_success(struct zfcp_erp_action *act)
 {
 	switch (act->action) {
 	case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
-		_zfcp_erp_port_reopen_all(act->adapter, 0, "ersfs_1", NULL);
+		_zfcp_erp_port_reopen_all(act->adapter, 0, "ersfs_1");
 		break;
 	case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
-		_zfcp_erp_port_reopen(act->port, 0, "ersfs_2", NULL);
+		_zfcp_erp_port_reopen(act->port, 0, "ersfs_2");
 		break;
 	case ZFCP_ERP_ACTION_REOPEN_PORT:
-		_zfcp_erp_lun_reopen_all(act->port, 0, "ersfs_3", NULL);
+		_zfcp_erp_lun_reopen_all(act->port, 0, "ersfs_3");
 		break;
 	}
 }
@@ -647,17 +644,6 @@ static void zfcp_erp_wakeup(struct zfcp_adapter *adapter)
 	read_unlock_irqrestore(&adapter->erp_lock, flags);
 }
 
-static int zfcp_erp_adapter_strategy_open_qdio(struct zfcp_erp_action *act)
-{
-	struct zfcp_qdio *qdio = act->adapter->qdio;
-
-	if (zfcp_qdio_open(qdio))
-		return ZFCP_ERP_FAILED;
-	init_waitqueue_head(&qdio->req_q_wq);
-	atomic_set_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &act->adapter->status);
-	return ZFCP_ERP_SUCCEEDED;
-}
-
 static void zfcp_erp_enqueue_ptp_port(struct zfcp_adapter *adapter)
 {
 	struct zfcp_port *port;
@@ -665,7 +651,7 @@ static void zfcp_erp_enqueue_ptp_port(struct zfcp_adapter *adapter)
 				 adapter->peer_d_id);
 	if (IS_ERR(port)) /* error or port already attached */
 		return;
-	_zfcp_erp_port_reopen(port, 0, "ereptp1", NULL);
+	_zfcp_erp_port_reopen(port, 0, "ereptp1");
 }
 
 static int zfcp_erp_adapter_strat_fsf_xconf(struct zfcp_erp_action *erp_action)
@@ -688,10 +674,8 @@ static int zfcp_erp_adapter_strat_fsf_xconf(struct zfcp_erp_action *erp_action)
 			return ZFCP_ERP_FAILED;
 		}
 
-		zfcp_dbf_rec_thread_lock("erasfx1", adapter->dbf);
 		wait_event(adapter->erp_ready_wq,
 			   !list_empty(&adapter->erp_ready_head));
-		zfcp_dbf_rec_thread_lock("erasfx2", adapter->dbf);
 		if (erp_action->status & ZFCP_STATUS_ERP_TIMEDOUT)
 			break;
 
@@ -730,10 +714,10 @@ static int zfcp_erp_adapter_strategy_open_fsf_xport(struct zfcp_erp_action *act)
 	if (ret)
 		return ZFCP_ERP_FAILED;
 
-	zfcp_dbf_rec_thread_lock("erasox1", adapter->dbf);
+	zfcp_dbf_rec_run("erasox1", act);
 	wait_event(adapter->erp_ready_wq,
 		   !list_empty(&adapter->erp_ready_head));
-	zfcp_dbf_rec_thread_lock("erasox2", adapter->dbf);
+	zfcp_dbf_rec_run("erasox2", act);
 	if (act->status & ZFCP_STATUS_ERP_TIMEDOUT)
 		return ZFCP_ERP_FAILED;
 
@@ -783,7 +767,7 @@ static int zfcp_erp_adapter_strategy_open(struct zfcp_erp_action *act)
 {
 	struct zfcp_adapter *adapter = act->adapter;
 
-	if (zfcp_erp_adapter_strategy_open_qdio(act)) {
+	if (zfcp_qdio_open(adapter->qdio)) {
 		atomic_clear_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK |
 				  ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED,
 				  &adapter->status);
@@ -1161,7 +1145,7 @@ static int zfcp_erp_strategy_statechange(struct zfcp_erp_action *act, int ret)
 		if (zfcp_erp_strat_change_det(&adapter->status, erp_status)) {
 			_zfcp_erp_adapter_reopen(adapter,
 						 ZFCP_STATUS_COMMON_ERP_FAILED,
-						 "ersscg1", NULL);
+						 "ersscg1");
 			return ZFCP_ERP_EXIT;
 		}
 		break;
@@ -1171,7 +1155,7 @@ static int zfcp_erp_strategy_statechange(struct zfcp_erp_action *act, int ret)
 		if (zfcp_erp_strat_change_det(&port->status, erp_status)) {
 			_zfcp_erp_port_reopen(port,
 					      ZFCP_STATUS_COMMON_ERP_FAILED,
-					      "ersscg2", NULL);
+					      "ersscg2");
 			return ZFCP_ERP_EXIT;
 		}
 		break;
@@ -1181,7 +1165,7 @@ static int zfcp_erp_strategy_statechange(struct zfcp_erp_action *act, int ret)
 		if (zfcp_erp_strat_change_det(&zfcp_sdev->status, erp_status)) {
 			_zfcp_erp_lun_reopen(sdev,
 					     ZFCP_STATUS_COMMON_ERP_FAILED,
-					     "ersscg3", NULL, 0);
+					     "ersscg3", 0);
 			return ZFCP_ERP_EXIT;
 		}
 		break;
@@ -1201,7 +1185,7 @@ static void zfcp_erp_action_dequeue(struct zfcp_erp_action *erp_action)
 	}
 
 	list_del(&erp_action->list);
-	zfcp_dbf_rec_action("eractd1", erp_action);
+	zfcp_dbf_rec_run("eractd1", erp_action);
 
 	switch (erp_action->action) {
 	case ZFCP_ERP_ACTION_REOPEN_LUN:
@@ -1308,7 +1292,7 @@ static int zfcp_erp_strategy(struct zfcp_erp_action *erp_action)
 			erp_action->status |= ZFCP_STATUS_ERP_LOWMEM;
 		}
 		if (adapter->erp_total_count == adapter->erp_low_mem_count)
-			_zfcp_erp_adapter_reopen(adapter, 0, "erstgy1", NULL);
+			_zfcp_erp_adapter_reopen(adapter, 0, "erstgy1");
 		else {
 			zfcp_erp_strategy_memwait(erp_action);
 			retval = ZFCP_ERP_CONTINUES;
@@ -1352,11 +1336,9 @@ static int zfcp_erp_thread(void *data)
 	unsigned long flags;
 
 	for (;;) {
-		zfcp_dbf_rec_thread_lock("erthrd1", adapter->dbf);
 		wait_event_interruptible(adapter->erp_ready_wq,
 			   !list_empty(&adapter->erp_ready_head) ||
 			   kthread_should_stop());
-		zfcp_dbf_rec_thread_lock("erthrd2", adapter->dbf);
 
 		if (kthread_should_stop())
 			break;
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index bf8f3e51483..6e325284fbe 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -45,47 +45,33 @@ extern void zfcp_cfdc_adapter_access_changed(struct zfcp_adapter *);
 
 /* zfcp_dbf.c */
 extern int zfcp_dbf_adapter_register(struct zfcp_adapter *);
-extern void zfcp_dbf_adapter_unregister(struct zfcp_dbf *);
-extern void zfcp_dbf_rec_thread(char *, struct zfcp_dbf *);
-extern void zfcp_dbf_rec_thread_lock(char *, struct zfcp_dbf *);
-extern void zfcp_dbf_rec_adapter(char *, void *, struct zfcp_dbf *);
-extern void zfcp_dbf_rec_port(char *, void *, struct zfcp_port *);
-extern void zfcp_dbf_rec_lun(char *, void *, struct scsi_device *);
-extern void zfcp_dbf_rec_trigger(char *, void *, u8, u8, void *,
-				 struct zfcp_adapter *, struct zfcp_port *,
-				 struct scsi_device *);
-extern void zfcp_dbf_rec_action(char *, struct zfcp_erp_action *);
-extern void _zfcp_dbf_hba_fsf_response(const char *, int, struct zfcp_fsf_req *,
-				       struct zfcp_dbf *);
-extern void _zfcp_dbf_hba_fsf_unsol(const char *, int level, struct zfcp_dbf *,
-					  struct fsf_status_read_buffer *);
-extern void zfcp_dbf_hba_qdio(struct zfcp_dbf *, unsigned int, int, int);
+extern void zfcp_dbf_adapter_unregister(struct zfcp_adapter *);
+extern void zfcp_dbf_rec_trig(char *, struct zfcp_adapter *,
+			      struct zfcp_port *, struct scsi_device *, u8, u8);
+extern void zfcp_dbf_rec_run(char *, struct zfcp_erp_action *);
+extern void zfcp_dbf_hba_fsf_uss(char *, struct zfcp_fsf_req *);
+extern void zfcp_dbf_hba_fsf_res(char *, struct zfcp_fsf_req *);
+extern void zfcp_dbf_hba_bit_err(char *, struct zfcp_fsf_req *);
 extern void zfcp_dbf_hba_berr(struct zfcp_dbf *, struct zfcp_fsf_req *);
-extern void zfcp_dbf_san_ct_request(struct zfcp_fsf_req *, u32);
-extern void zfcp_dbf_san_ct_response(struct zfcp_fsf_req *);
-extern void zfcp_dbf_san_els_request(struct zfcp_fsf_req *);
-extern void zfcp_dbf_san_els_response(struct zfcp_fsf_req *);
-extern void zfcp_dbf_san_incoming_els(struct zfcp_fsf_req *);
-extern void _zfcp_dbf_scsi(const char *, const char *, int, struct zfcp_dbf *,
-			   struct scsi_cmnd *, struct zfcp_fsf_req *,
-			   unsigned long);
+extern void zfcp_dbf_san_req(char *, struct zfcp_fsf_req *, u32);
+extern void zfcp_dbf_san_res(char *, struct zfcp_fsf_req *);
+extern void zfcp_dbf_san_in_els(char *, struct zfcp_fsf_req *);
+extern void zfcp_dbf_scsi(char *, struct scsi_cmnd *, struct zfcp_fsf_req *);
 
 /* zfcp_erp.c */
 extern void zfcp_erp_set_adapter_status(struct zfcp_adapter *, u32);
 extern void zfcp_erp_clear_adapter_status(struct zfcp_adapter *, u32);
-extern void zfcp_erp_adapter_reopen(struct zfcp_adapter *, int, char *, void *);
-extern void zfcp_erp_adapter_shutdown(struct zfcp_adapter *, int, char *,
-				      void *);
+extern void zfcp_erp_adapter_reopen(struct zfcp_adapter *, int, char *);
+extern void zfcp_erp_adapter_shutdown(struct zfcp_adapter *, int, char *);
 extern void zfcp_erp_set_port_status(struct zfcp_port *, u32);
 extern void zfcp_erp_clear_port_status(struct zfcp_port *, u32);
-extern int  zfcp_erp_port_reopen(struct zfcp_port *, int, char *, void *);
-extern void zfcp_erp_port_shutdown(struct zfcp_port *, int, char *, void *);
-extern void zfcp_erp_port_forced_reopen(struct zfcp_port *, int, char *,
-					void *);
+extern int  zfcp_erp_port_reopen(struct zfcp_port *, int, char *);
+extern void zfcp_erp_port_shutdown(struct zfcp_port *, int, char *);
+extern void zfcp_erp_port_forced_reopen(struct zfcp_port *, int, char *);
 extern void zfcp_erp_set_lun_status(struct scsi_device *, u32);
 extern void zfcp_erp_clear_lun_status(struct scsi_device *, u32);
-extern void zfcp_erp_lun_reopen(struct scsi_device *, int, char *, void *);
-extern void zfcp_erp_lun_shutdown(struct scsi_device *, int, char *, void *);
+extern void zfcp_erp_lun_reopen(struct scsi_device *, int, char *);
+extern void zfcp_erp_lun_shutdown(struct scsi_device *, int, char *);
 extern void zfcp_erp_lun_shutdown_wait(struct scsi_device *, char *);
 extern int  zfcp_erp_thread_setup(struct zfcp_adapter *);
 extern void zfcp_erp_thread_kill(struct zfcp_adapter *);
@@ -149,6 +135,8 @@ extern int zfcp_qdio_sbals_from_sg(struct zfcp_qdio *, struct zfcp_qdio_req *,
 extern int zfcp_qdio_open(struct zfcp_qdio *);
 extern void zfcp_qdio_close(struct zfcp_qdio *);
 extern void zfcp_qdio_siosl(struct zfcp_adapter *);
+extern struct zfcp_fsf_req *zfcp_fsf_get_req(struct zfcp_qdio *,
+					     struct qdio_buffer *);
 
 /* zfcp_scsi.c */
 extern struct zfcp_data zfcp_data;
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 86fd905df48..30cf91a787a 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -174,7 +174,7 @@ static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
 		if (!port->d_id)
 			zfcp_erp_port_reopen(port,
 					     ZFCP_STATUS_COMMON_ERP_FAILED,
-					     "fcrscn1", NULL);
+					     "fcrscn1");
 	}
 	read_unlock_irqrestore(&adapter->port_list_lock, flags);
 }
@@ -215,7 +215,7 @@ static void zfcp_fc_incoming_wwpn(struct zfcp_fsf_req *req, u64 wwpn)
 	read_lock_irqsave(&adapter->port_list_lock, flags);
 	list_for_each_entry(port, &adapter->port_list, list)
 		if (port->wwpn == wwpn) {
-			zfcp_erp_port_forced_reopen(port, 0, "fciwwp1", req);
+			zfcp_erp_port_forced_reopen(port, 0, "fciwwp1");
 			break;
 		}
 	read_unlock_irqrestore(&adapter->port_list_lock, flags);
@@ -251,7 +251,7 @@ void zfcp_fc_incoming_els(struct zfcp_fsf_req *fsf_req)
 		(struct fsf_status_read_buffer *) fsf_req->data;
 	unsigned int els_type = status_buffer->payload.data[0];
 
-	zfcp_dbf_san_incoming_els(fsf_req);
+	zfcp_dbf_san_in_els("fciels1", fsf_req);
 	if (els_type == ELS_PLOGI)
 		zfcp_fc_incoming_plogi(fsf_req);
 	else if (els_type == ELS_LOGO)
@@ -360,7 +360,7 @@ void zfcp_fc_port_did_lookup(struct work_struct *work)
 	ret = zfcp_fc_ns_gid_pn(port);
 	if (ret) {
 		/* could not issue gid_pn for some reason */
-		zfcp_erp_adapter_reopen(port->adapter, 0, "fcgpn_1", NULL);
+		zfcp_erp_adapter_reopen(port->adapter, 0, "fcgpn_1");
 		goto out;
 	}
 
@@ -369,7 +369,7 @@ void zfcp_fc_port_did_lookup(struct work_struct *work)
 		goto out;
 	}
 
-	zfcp_erp_port_reopen(port, 0, "fcgpn_3", NULL);
+	zfcp_erp_port_reopen(port, 0, "fcgpn_3");
 out:
 	put_device(&port->dev);
 }
@@ -426,7 +426,7 @@ static void zfcp_fc_adisc_handler(void *data)
 	if (adisc->els.status) {
 		/* request rejected or timed out */
 		zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
-					    "fcadh_1", NULL);
+					    "fcadh_1");
 		goto out;
 	}
 
@@ -436,7 +436,7 @@ static void zfcp_fc_adisc_handler(void *data)
 	if ((port->wwpn != adisc_resp->adisc_wwpn) ||
 	    !(atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)) {
 		zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
-				     "fcadh_2", NULL);
+				     "fcadh_2");
 		goto out;
 	}
 
@@ -507,7 +507,7 @@ void zfcp_fc_link_test_work(struct work_struct *work)
 
 	/* send of ADISC was not possible */
 	atomic_clear_mask(ZFCP_STATUS_PORT_LINK_TEST, &port->status);
-	zfcp_erp_port_forced_reopen(port, 0, "fcltwk1", NULL);
+	zfcp_erp_port_forced_reopen(port, 0, "fcltwk1");
 
 out:
 	put_device(&port->dev);
@@ -659,7 +659,7 @@ static int zfcp_fc_eval_gpn_ft(struct zfcp_fc_gpn_ft *gpn_ft,
 		port = zfcp_port_enqueue(adapter, acc->fp_wwpn,
 					 ZFCP_STATUS_COMMON_NOESC, d_id);
 		if (!IS_ERR(port))
-			zfcp_erp_port_reopen(port, 0, "fcegpf1", NULL);
+			zfcp_erp_port_reopen(port, 0, "fcegpf1");
 		else if (PTR_ERR(port) != -EEXIST)
 			ret = PTR_ERR(port);
 	}
@@ -671,7 +671,7 @@ static int zfcp_fc_eval_gpn_ft(struct zfcp_fc_gpn_ft *gpn_ft,
 	write_unlock_irqrestore(&adapter->port_list_lock, flags);
 
 	list_for_each_entry_safe(port, tmp, &remove_lh, list) {
-		zfcp_erp_port_shutdown(port, 0, "fcegpf2", NULL);
+		zfcp_erp_port_shutdown(port, 0, "fcegpf2");
 		zfcp_device_unregister(&port->dev, &zfcp_sysfs_port_attrs);
 	}
 
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index be031745714..60ff9d172c7 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -23,7 +23,7 @@ static void zfcp_fsf_request_timeout_handler(unsigned long data)
 	struct zfcp_adapter *adapter = (struct zfcp_adapter *) data;
 	zfcp_qdio_siosl(adapter);
 	zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
-				"fsrth_1", NULL);
+				"fsrth_1");
 }
 
 static void zfcp_fsf_start_timer(struct zfcp_fsf_req *fsf_req,
@@ -65,7 +65,7 @@ static void zfcp_fsf_class_not_supp(struct zfcp_fsf_req *req)
 {
 	dev_err(&req->adapter->ccw_device->dev, "FCP device not "
 		"operational because of an unsupported FC class\n");
-	zfcp_erp_adapter_shutdown(req->adapter, 0, "fscns_1", req);
+	zfcp_erp_adapter_shutdown(req->adapter, 0, "fscns_1");
 	req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 }
 
@@ -98,7 +98,7 @@ static void zfcp_fsf_status_read_port_closed(struct zfcp_fsf_req *req)
 	read_lock_irqsave(&adapter->port_list_lock, flags);
 	list_for_each_entry(port, &adapter->port_list, list)
 		if (port->d_id == d_id) {
-			zfcp_erp_port_reopen(port, 0, "fssrpc1", req);
+			zfcp_erp_port_reopen(port, 0, "fssrpc1");
 			break;
 		}
 	read_unlock_irqrestore(&adapter->port_list_lock, flags);
@@ -211,13 +211,13 @@ static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req)
 	struct fsf_status_read_buffer *sr_buf = req->data;
 
 	if (req->status & ZFCP_STATUS_FSFREQ_DISMISSED) {
-		zfcp_dbf_hba_fsf_unsol("dism", adapter->dbf, sr_buf);
+		zfcp_dbf_hba_fsf_uss("fssrh_1", req);
 		mempool_free(sr_buf, adapter->pool.status_read_data);
 		zfcp_fsf_req_free(req);
 		return;
 	}
 
-	zfcp_dbf_hba_fsf_unsol("read", adapter->dbf, sr_buf);
+	zfcp_dbf_hba_fsf_uss("fssrh_2", req);
 
 	switch (sr_buf->status_type) {
 	case FSF_STATUS_READ_PORT_CLOSED:
@@ -232,7 +232,7 @@ static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req)
 		dev_warn(&adapter->ccw_device->dev,
 			 "The error threshold for checksum statistics "
 			 "has been exceeded\n");
-		zfcp_dbf_hba_berr(adapter->dbf, req);
+		zfcp_dbf_hba_bit_err("fssrh_3", req);
 		break;
 	case FSF_STATUS_READ_LINK_DOWN:
 		zfcp_fsf_status_read_link_down(req);
@@ -247,7 +247,7 @@ static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req)
 		zfcp_erp_adapter_reopen(adapter,
 					ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED |
 					ZFCP_STATUS_COMMON_ERP_FAILED,
-					"fssrh_2", req);
+					"fssrh_2");
 		zfcp_fc_enqueue_event(adapter, FCH_EVT_LINKUP, 0);
 
 		break;
@@ -287,7 +287,7 @@ static void zfcp_fsf_fsfstatus_qual_eval(struct zfcp_fsf_req *req)
 			"The FCP adapter reported a problem "
 			"that cannot be recovered\n");
 		zfcp_qdio_siosl(req->adapter);
-		zfcp_erp_adapter_shutdown(req->adapter, 0, "fsfsqe1", req);
+		zfcp_erp_adapter_shutdown(req->adapter, 0, "fsfsqe1");
 		break;
 	}
 	/* all non-return stats set FSFREQ_ERROR*/
@@ -304,7 +304,7 @@ static void zfcp_fsf_fsfstatus_eval(struct zfcp_fsf_req *req)
 		dev_err(&req->adapter->ccw_device->dev,
 			"The FCP adapter does not recognize the command 0x%x\n",
 			req->qtcb->header.fsf_command);
-		zfcp_erp_adapter_shutdown(req->adapter, 0, "fsfse_1", req);
+		zfcp_erp_adapter_shutdown(req->adapter, 0, "fsfse_1");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_ADAPTER_STATUS_AVAILABLE:
@@ -335,17 +335,17 @@ static void zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *req)
 			"QTCB version 0x%x not supported by FCP adapter "
 			"(0x%x to 0x%x)\n", FSF_QTCB_CURRENT_VERSION,
 			psq->word[0], psq->word[1]);
-		zfcp_erp_adapter_shutdown(adapter, 0, "fspse_1", req);
+		zfcp_erp_adapter_shutdown(adapter, 0, "fspse_1");
 		break;
 	case FSF_PROT_ERROR_STATE:
 	case FSF_PROT_SEQ_NUMB_ERROR:
-		zfcp_erp_adapter_reopen(adapter, 0, "fspse_2", req);
+		zfcp_erp_adapter_reopen(adapter, 0, "fspse_2");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_PROT_UNSUPP_QTCB_TYPE:
 		dev_err(&adapter->ccw_device->dev,
 			"The QTCB type is not supported by the FCP adapter\n");
-		zfcp_erp_adapter_shutdown(adapter, 0, "fspse_3", req);
+		zfcp_erp_adapter_shutdown(adapter, 0, "fspse_3");
 		break;
 	case FSF_PROT_HOST_CONNECTION_INITIALIZING:
 		atomic_set_mask(ZFCP_STATUS_ADAPTER_HOST_CON_INIT,
@@ -355,12 +355,12 @@ static void zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *req)
 		dev_err(&adapter->ccw_device->dev,
 			"0x%Lx is an ambiguous request identifier\n",
 			(unsigned long long)qtcb->bottom.support.req_handle);
-		zfcp_erp_adapter_shutdown(adapter, 0, "fspse_4", req);
+		zfcp_erp_adapter_shutdown(adapter, 0, "fspse_4");
 		break;
 	case FSF_PROT_LINK_DOWN:
 		zfcp_fsf_link_down_info_eval(req, &psq->link_down_info);
 		/* go through reopen to flush pending requests */
-		zfcp_erp_adapter_reopen(adapter, 0, "fspse_6", req);
+		zfcp_erp_adapter_reopen(adapter, 0, "fspse_6");
 		break;
 	case FSF_PROT_REEST_QUEUE:
 		/* All ports should be marked as ready to run again */
@@ -369,14 +369,14 @@ static void zfcp_fsf_protstatus_eval(struct zfcp_fsf_req *req)
 		zfcp_erp_adapter_reopen(adapter,
 					ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED |
 					ZFCP_STATUS_COMMON_ERP_FAILED,
-					"fspse_8", req);
+					"fspse_8");
 		break;
 	default:
 		dev_err(&adapter->ccw_device->dev,
 			"0x%x is not a valid transfer protocol status\n",
 			qtcb->prefix.prot_status);
 		zfcp_qdio_siosl(adapter);
-		zfcp_erp_adapter_shutdown(adapter, 0, "fspse_9", req);
+		zfcp_erp_adapter_shutdown(adapter, 0, "fspse_9");
 	}
 	req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 }
@@ -482,7 +482,7 @@ static int zfcp_fsf_exchange_config_evaluate(struct zfcp_fsf_req *req)
 		dev_err(&adapter->ccw_device->dev,
 			"Unknown or unsupported arbitrated loop "
 			"fibre channel topology detected\n");
-		zfcp_erp_adapter_shutdown(adapter, 0, "fsece_1", req);
+		zfcp_erp_adapter_shutdown(adapter, 0, "fsece_1");
 		return -EIO;
 	}
 
@@ -518,7 +518,7 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req)
 				"FCP adapter maximum QTCB size (%d bytes) "
 				"is too small\n",
 				bottom->max_qtcb_size);
-			zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh1", req);
+			zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh1");
 			return;
 		}
 		atomic_set_mask(ZFCP_STATUS_ADAPTER_XCONFIG_OK,
@@ -536,7 +536,7 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req)
 			&qtcb->header.fsf_status_qual.link_down_info);
 		break;
 	default:
-		zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh3", req);
+		zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh3");
 		return;
 	}
 
@@ -552,14 +552,14 @@ static void zfcp_fsf_exchange_config_data_handler(struct zfcp_fsf_req *req)
 		dev_err(&adapter->ccw_device->dev,
 			"The FCP adapter only supports newer "
 			"control block versions\n");
-		zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh4", req);
+		zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh4");
 		return;
 	}
 	if (FSF_QTCB_CURRENT_VERSION > bottom->high_qtcb_version) {
 		dev_err(&adapter->ccw_device->dev,
 			"The FCP adapter only supports older "
 			"control block versions\n");
-		zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh5", req);
+		zfcp_erp_adapter_shutdown(adapter, 0, "fsecdh5");
 	}
 }
 
@@ -700,7 +700,7 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
 		del_timer(&req->timer);
 		/* lookup request again, list might have changed */
 		zfcp_reqlist_find_rm(adapter->req_list, req_id);
-		zfcp_erp_adapter_reopen(adapter, 0, "fsrs__1", req);
+		zfcp_erp_adapter_reopen(adapter, 0, "fsrs__1");
 		return -EIO;
 	}
 
@@ -754,10 +754,11 @@ int zfcp_fsf_status_read(struct zfcp_qdio *qdio)
 	goto out;
 
 failed_req_send:
+	req->data = NULL;
 	mempool_free(sr_buf, adapter->pool.status_read_data);
 failed_buf:
+	zfcp_dbf_hba_fsf_uss("fssr__1", req);
 	zfcp_fsf_req_free(req);
-	zfcp_dbf_hba_fsf_unsol("fail", adapter->dbf, NULL);
 out:
 	spin_unlock_irq(&qdio->req_q_lock);
 	return retval;
@@ -776,14 +777,13 @@ static void zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *req)
 	case FSF_PORT_HANDLE_NOT_VALID:
 		if (fsq->word[0] == fsq->word[1]) {
 			zfcp_erp_adapter_reopen(zfcp_sdev->port->adapter, 0,
-						"fsafch1", req);
+						"fsafch1");
 			req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		}
 		break;
 	case FSF_LUN_HANDLE_NOT_VALID:
 		if (fsq->word[0] == fsq->word[1]) {
-			zfcp_erp_port_reopen(zfcp_sdev->port, 0, "fsafch2",
-					     req);
+			zfcp_erp_port_reopen(zfcp_sdev->port, 0, "fsafch2");
 			req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		}
 		break;
@@ -794,14 +794,13 @@ static void zfcp_fsf_abort_fcp_command_handler(struct zfcp_fsf_req *req)
 		zfcp_erp_set_port_status(zfcp_sdev->port,
 					 ZFCP_STATUS_COMMON_ACCESS_BOXED);
 		zfcp_erp_port_reopen(zfcp_sdev->port,
-				     ZFCP_STATUS_COMMON_ERP_FAILED, "fsafch3",
-				     req);
+				     ZFCP_STATUS_COMMON_ERP_FAILED, "fsafch3");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_LUN_BOXED:
 		zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_ACCESS_BOXED);
 		zfcp_erp_lun_reopen(sdev, ZFCP_STATUS_COMMON_ERP_FAILED,
-				    "fsafch4", req);
+				    "fsafch4");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
                 break;
 	case FSF_ADAPTER_STATUS_AVAILABLE:
@@ -851,7 +850,7 @@ struct zfcp_fsf_req *zfcp_fsf_abort_fcp_cmnd(struct scsi_cmnd *scmnd)
 
 	zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
 
-	req->data = zfcp_sdev;
+	req->data = sdev;
 	req->handler = zfcp_fsf_abort_fcp_command_handler;
 	req->qtcb->header.lun_handle = zfcp_sdev->lun_handle;
 	req->qtcb->header.port_handle = zfcp_sdev->port->handle;
@@ -882,7 +881,7 @@ static void zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *req)
 
 	switch (header->fsf_status) {
         case FSF_GOOD:
-		zfcp_dbf_san_ct_response(req);
+		zfcp_dbf_san_res("fsscth1", req);
 		ct->status = 0;
 		break;
         case FSF_SERVICE_CLASS_NOT_SUPPORTED:
@@ -902,7 +901,7 @@ static void zfcp_fsf_send_ct_handler(struct zfcp_fsf_req *req)
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_PORT_HANDLE_NOT_VALID:
-		zfcp_erp_adapter_reopen(adapter, 0, "fsscth1", req);
+		zfcp_erp_adapter_reopen(adapter, 0, "fsscth1");
 		/* fall through */
 	case FSF_GENERIC_COMMAND_REJECTED:
 	case FSF_PAYLOAD_SIZE_MISMATCH:
@@ -1025,7 +1024,7 @@ int zfcp_fsf_send_ct(struct zfcp_fc_wka_port *wka_port,
 	req->qtcb->header.port_handle = wka_port->handle;
 	req->data = ct;
 
-	zfcp_dbf_san_ct_request(req, wka_port->d_id);
+	zfcp_dbf_san_req("fssct_1", req, wka_port->d_id);
 
 	ret = zfcp_fsf_req_send(req);
 	if (ret)
@@ -1053,7 +1052,7 @@ static void zfcp_fsf_send_els_handler(struct zfcp_fsf_req *req)
 
 	switch (header->fsf_status) {
 	case FSF_GOOD:
-		zfcp_dbf_san_els_response(req);
+		zfcp_dbf_san_res("fsselh1", req);
 		send_els->status = 0;
 		break;
 	case FSF_SERVICE_CLASS_NOT_SUPPORTED:
@@ -1127,7 +1126,7 @@ int zfcp_fsf_send_els(struct zfcp_adapter *adapter, u32 d_id,
 	req->handler = zfcp_fsf_send_els_handler;
 	req->data = els;
 
-	zfcp_dbf_san_els_request(req);
+	zfcp_dbf_san_req("fssels1", req, d_id);
 
 	ret = zfcp_fsf_req_send(req);
 	if (ret)
@@ -1448,7 +1447,7 @@ static void zfcp_fsf_close_port_handler(struct zfcp_fsf_req *req)
 
 	switch (req->qtcb->header.fsf_status) {
 	case FSF_PORT_HANDLE_NOT_VALID:
-		zfcp_erp_adapter_reopen(port->adapter, 0, "fscph_1", req);
+		zfcp_erp_adapter_reopen(port->adapter, 0, "fscph_1");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_ADAPTER_STATUS_AVAILABLE:
@@ -1580,7 +1579,7 @@ static void zfcp_fsf_close_wka_port_handler(struct zfcp_fsf_req *req)
 
 	if (req->qtcb->header.fsf_status == FSF_PORT_HANDLE_NOT_VALID) {
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
-		zfcp_erp_adapter_reopen(wka_port->adapter, 0, "fscwph1", req);
+		zfcp_erp_adapter_reopen(wka_port->adapter, 0, "fscwph1");
 	}
 
 	wka_port->status = ZFCP_FC_WKA_PORT_OFFLINE;
@@ -1638,7 +1637,7 @@ static void zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *req)
 
 	switch (header->fsf_status) {
 	case FSF_PORT_HANDLE_NOT_VALID:
-		zfcp_erp_adapter_reopen(port->adapter, 0, "fscpph1", req);
+		zfcp_erp_adapter_reopen(port->adapter, 0, "fscpph1");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_ACCESS_DENIED:
@@ -1654,7 +1653,7 @@ static void zfcp_fsf_close_physical_port_handler(struct zfcp_fsf_req *req)
 						  &sdev_to_zfcp(sdev)->status);
 		zfcp_erp_set_port_status(port, ZFCP_STATUS_COMMON_ACCESS_BOXED);
 		zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
-				     "fscpph2", req);
+				     "fscpph2");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_ADAPTER_STATUS_AVAILABLE:
@@ -1743,7 +1742,7 @@ static void zfcp_fsf_open_lun_handler(struct zfcp_fsf_req *req)
 	switch (header->fsf_status) {
 
 	case FSF_PORT_HANDLE_NOT_VALID:
-		zfcp_erp_adapter_reopen(adapter, 0, "fsouh_1", req);
+		zfcp_erp_adapter_reopen(adapter, 0, "fsouh_1");
 		/* fall through */
 	case FSF_LUN_ALREADY_OPEN:
 		break;
@@ -1755,8 +1754,7 @@ static void zfcp_fsf_open_lun_handler(struct zfcp_fsf_req *req)
 		zfcp_erp_set_port_status(zfcp_sdev->port,
 					 ZFCP_STATUS_COMMON_ACCESS_BOXED);
 		zfcp_erp_port_reopen(zfcp_sdev->port,
-				     ZFCP_STATUS_COMMON_ERP_FAILED, "fsouh_2",
-				     req);
+				     ZFCP_STATUS_COMMON_ERP_FAILED, "fsouh_2");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_LUN_SHARING_VIOLATION:
@@ -1852,20 +1850,18 @@ static void zfcp_fsf_close_lun_handler(struct zfcp_fsf_req *req)
 
 	switch (req->qtcb->header.fsf_status) {
 	case FSF_PORT_HANDLE_NOT_VALID:
-		zfcp_erp_adapter_reopen(zfcp_sdev->port->adapter, 0, "fscuh_1",
-					req);
+		zfcp_erp_adapter_reopen(zfcp_sdev->port->adapter, 0, "fscuh_1");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_LUN_HANDLE_NOT_VALID:
-		zfcp_erp_port_reopen(zfcp_sdev->port, 0, "fscuh_2", req);
+		zfcp_erp_port_reopen(zfcp_sdev->port, 0, "fscuh_2");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_PORT_BOXED:
 		zfcp_erp_set_port_status(zfcp_sdev->port,
 					 ZFCP_STATUS_COMMON_ACCESS_BOXED);
 		zfcp_erp_port_reopen(zfcp_sdev->port,
-				     ZFCP_STATUS_COMMON_ERP_FAILED, "fscuh_3",
-				     req);
+				     ZFCP_STATUS_COMMON_ERP_FAILED, "fscuh_3");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_ADAPTER_STATUS_AVAILABLE:
@@ -2002,13 +1998,12 @@ static void zfcp_fsf_fcp_handler_common(struct zfcp_fsf_req *req)
 	switch (header->fsf_status) {
 	case FSF_HANDLE_MISMATCH:
 	case FSF_PORT_HANDLE_NOT_VALID:
-		zfcp_erp_adapter_reopen(zfcp_sdev->port->adapter, 0, "fssfch1",
-					req);
+		zfcp_erp_adapter_reopen(zfcp_sdev->port->adapter, 0, "fssfch1");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_FCPLUN_NOT_VALID:
 	case FSF_LUN_HANDLE_NOT_VALID:
-		zfcp_erp_port_reopen(zfcp_sdev->port, 0, "fssfch2", req);
+		zfcp_erp_port_reopen(zfcp_sdev->port, 0, "fssfch2");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_SERVICE_CLASS_NOT_SUPPORTED:
@@ -2026,7 +2021,7 @@ static void zfcp_fsf_fcp_handler_common(struct zfcp_fsf_req *req)
 			(unsigned long long)zfcp_scsi_dev_lun(sdev),
 			(unsigned long long)zfcp_sdev->port->wwpn);
 		zfcp_erp_adapter_shutdown(zfcp_sdev->port->adapter, 0,
-					  "fssfch3", req);
+					  "fssfch3");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_CMND_LENGTH_NOT_VALID:
@@ -2037,21 +2032,20 @@ static void zfcp_fsf_fcp_handler_common(struct zfcp_fsf_req *req)
 			(unsigned long long)zfcp_scsi_dev_lun(sdev),
 			(unsigned long long)zfcp_sdev->port->wwpn);
 		zfcp_erp_adapter_shutdown(zfcp_sdev->port->adapter, 0,
-					  "fssfch4", req);
+					  "fssfch4");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_PORT_BOXED:
 		zfcp_erp_set_port_status(zfcp_sdev->port,
 					 ZFCP_STATUS_COMMON_ACCESS_BOXED);
 		zfcp_erp_port_reopen(zfcp_sdev->port,
-				     ZFCP_STATUS_COMMON_ERP_FAILED, "fssfch5",
-				     req);
+				     ZFCP_STATUS_COMMON_ERP_FAILED, "fssfch5");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_LUN_BOXED:
 		zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_ACCESS_BOXED);
 		zfcp_erp_lun_reopen(sdev, ZFCP_STATUS_COMMON_ERP_FAILED,
-				    "fssfch6", req);
+				    "fssfch6");
 		req->status |= ZFCP_STATUS_FSFREQ_ERROR;
 		break;
 	case FSF_ADAPTER_STATUS_AVAILABLE:
@@ -2069,8 +2063,6 @@ static void zfcp_fsf_fcp_cmnd_handler(struct zfcp_fsf_req *req)
 	struct fcp_resp_with_ext *fcp_rsp;
 	unsigned long flags;
 
-	zfcp_fsf_fcp_handler_common(req);
-
 	read_lock_irqsave(&req->adapter->abort_lock, flags);
 
 	scpnt = req->data;
@@ -2079,6 +2071,8 @@ static void zfcp_fsf_fcp_cmnd_handler(struct zfcp_fsf_req *req)
 		return;
 	}
 
+	zfcp_fsf_fcp_handler_common(req);
+
 	if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
 		set_host_byte(scpnt, DID_TRANSPORT_DISRUPTED);
 		goto skip_fsfstatus;
@@ -2104,7 +2098,7 @@ static void zfcp_fsf_fcp_cmnd_handler(struct zfcp_fsf_req *req)
 
 skip_fsfstatus:
 	zfcp_fsf_req_trace(req, scpnt);
-	zfcp_dbf_scsi_result(req->adapter->dbf, scpnt, req);
+	zfcp_dbf_scsi_result(scpnt, req);
 
 	scpnt->host_scribble = NULL;
 	(scpnt->scsi_done) (scpnt);
@@ -2170,12 +2164,13 @@ int zfcp_fsf_fcp_cmnd(struct scsi_cmnd *scsi_cmnd)
 	struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
 	struct zfcp_qdio *qdio = adapter->qdio;
 	struct fsf_qtcb_bottom_io *io;
+	unsigned long flags;
 
 	if (unlikely(!(atomic_read(&zfcp_sdev->status) &
 		       ZFCP_STATUS_COMMON_UNBLOCKED)))
 		return -EBUSY;
 
-	spin_lock(&qdio->req_q_lock);
+	spin_lock_irqsave(&qdio->req_q_lock, flags);
 	if (atomic_read(&qdio->req_q_free) <= 0) {
 		atomic_inc(&qdio->req_q_full);
 		goto out;
@@ -2239,7 +2234,7 @@ failed_scsi_cmnd:
 	zfcp_fsf_req_free(req);
 	scsi_cmnd->host_scribble = NULL;
 out:
-	spin_unlock(&qdio->req_q_lock);
+	spin_unlock_irqrestore(&qdio->req_q_lock, flags);
 	return retval;
 }
 
@@ -2419,3 +2414,12 @@ void zfcp_fsf_reqid_check(struct zfcp_qdio *qdio, int sbal_idx)
 			break;
 	}
 }
+
+struct zfcp_fsf_req *zfcp_fsf_get_req(struct zfcp_qdio *qdio,
+				      struct qdio_buffer *sbal)
+{
+	struct qdio_buffer_element *sbale = &sbal->element[0];
+	u64 req_id = (unsigned long) sbale->addr;
+
+	return zfcp_reqlist_find(qdio->adapter->req_list, req_id);
+}
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index a0554beb417..8da5ed644c2 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -41,7 +41,7 @@ static void zfcp_qdio_handler_error(struct zfcp_qdio *qdio, char *id,
 		zfcp_qdio_siosl(adapter);
 	zfcp_erp_adapter_reopen(adapter,
 				ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED |
-				ZFCP_STATUS_COMMON_ERP_FAILED, id, NULL);
+				ZFCP_STATUS_COMMON_ERP_FAILED, id);
 }
 
 static void zfcp_qdio_zero_sbals(struct qdio_buffer *sbal[], int first, int cnt)
@@ -74,7 +74,6 @@ static void zfcp_qdio_int_req(struct ccw_device *cdev, unsigned int qdio_err,
 	struct zfcp_qdio *qdio = (struct zfcp_qdio *) parm;
 
 	if (unlikely(qdio_err)) {
-		zfcp_dbf_hba_qdio(qdio->adapter->dbf, qdio_err, idx, count);
 		zfcp_qdio_handler_error(qdio, "qdireq1", qdio_err);
 		return;
 	}
@@ -97,7 +96,6 @@ static void zfcp_qdio_int_resp(struct ccw_device *cdev, unsigned int qdio_err,
 	int sbal_idx, sbal_no;
 
 	if (unlikely(qdio_err)) {
-		zfcp_dbf_hba_qdio(qdio->adapter->dbf, qdio_err, idx, count);
 		zfcp_qdio_handler_error(qdio, "qdires1", qdio_err);
 		return;
 	}
@@ -116,7 +114,7 @@ static void zfcp_qdio_int_resp(struct ccw_device *cdev, unsigned int qdio_err,
 	 * put SBALs back to response queue
 	 */
 	if (do_QDIO(cdev, QDIO_FLAG_SYNC_INPUT, 0, idx, count))
-		zfcp_erp_adapter_reopen(qdio->adapter, 0, "qdires2", NULL);
+		zfcp_erp_adapter_reopen(qdio->adapter, 0, "qdires2");
 }
 
 static struct qdio_buffer_element *
@@ -236,7 +234,7 @@ int zfcp_qdio_sbal_get(struct zfcp_qdio *qdio)
 	if (!ret) {
 		atomic_inc(&qdio->req_q_full);
 		/* assume hanging outbound queue, try queue recovery */
-		zfcp_erp_adapter_reopen(qdio->adapter, 0, "qdsbg_1", NULL);
+		zfcp_erp_adapter_reopen(qdio->adapter, 0, "qdsbg_1");
 	}
 
 	spin_lock_irq(&qdio->req_q_lock);
@@ -292,6 +290,8 @@ static void zfcp_qdio_setup_init_data(struct qdio_initialize *id,
 	id->int_parm = (unsigned long) qdio;
 	id->input_sbal_addr_array = (void **) (qdio->res_q);
 	id->output_sbal_addr_array = (void **) (qdio->req_q);
+	id->scan_threshold =
+		QDIO_MAX_BUFFERS_PER_Q - ZFCP_QDIO_MAX_SBALS_PER_REQ * 2;
 }
 
 /**
@@ -309,6 +309,7 @@ static int zfcp_qdio_allocate(struct zfcp_qdio *qdio)
 		return -ENOMEM;
 
 	zfcp_qdio_setup_init_data(&init_data, qdio);
+	init_waitqueue_head(&qdio->req_q_wq);
 
 	return qdio_allocate(&init_data);
 }
@@ -393,6 +394,7 @@ int zfcp_qdio_open(struct zfcp_qdio *qdio)
 	/* set index of first avalable SBALS / number of available SBALS */
 	qdio->req_q_idx = 0;
 	atomic_set(&qdio->req_q_free, QDIO_MAX_BUFFERS_PER_Q);
+	atomic_set_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &qdio->adapter->status);
 
 	return 0;
 
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 50286d8707f..ddb5800823a 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -30,6 +30,10 @@ module_param_named(dif, enable_dif, bool, 0600);
 MODULE_PARM_DESC(dif, "Enable DIF/DIX data integrity support");
 #endif
 
+static bool allow_lun_scan = 1;
+module_param(allow_lun_scan, bool, 0600);
+MODULE_PARM_DESC(allow_lun_scan, "For NPIV, scan and attach all storage LUNs");
+
 static int zfcp_scsi_change_queue_depth(struct scsi_device *sdev, int depth,
 					int reason)
 {
@@ -68,31 +72,26 @@ static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
 
 static void zfcp_scsi_command_fail(struct scsi_cmnd *scpnt, int result)
 {
-	struct zfcp_adapter *adapter =
-		(struct zfcp_adapter *) scpnt->device->host->hostdata[0];
-
 	set_host_byte(scpnt, result);
-	zfcp_dbf_scsi_fail_send(adapter->dbf, scpnt);
+	zfcp_dbf_scsi_fail_send(scpnt);
 	scpnt->scsi_done(scpnt);
 }
 
-static int zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt,
-				  void (*done) (struct scsi_cmnd *))
+static
+int zfcp_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scpnt)
 {
 	struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
-	struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
 	struct fc_rport *rport = starget_to_rport(scsi_target(scpnt->device));
 	int    status, scsi_result, ret;
 
 	/* reset the status for this request */
 	scpnt->result = 0;
 	scpnt->host_scribble = NULL;
-	scpnt->scsi_done = done;
 
 	scsi_result = fc_remote_port_chkready(rport);
 	if (unlikely(scsi_result)) {
 		scpnt->result = scsi_result;
-		zfcp_dbf_scsi_fail_send(adapter->dbf, scpnt);
+		zfcp_dbf_scsi_fail_send(scpnt);
 		scpnt->scsi_done(scpnt);
 		return 0;
 	}
@@ -135,6 +134,7 @@ static int zfcp_scsi_slave_alloc(struct scsi_device *sdev)
 	struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
 	struct zfcp_port *port;
 	struct zfcp_unit *unit;
+	int npiv = adapter->connection_features & FSF_FEATURE_NPIV_MODE;
 
 	port = zfcp_get_port_by_wwpn(adapter, rport->port_name);
 	if (!port)
@@ -144,7 +144,7 @@ static int zfcp_scsi_slave_alloc(struct scsi_device *sdev)
 	if (unit)
 		put_device(&unit->dev);
 
-	if (!unit && !(adapter->connection_features & FSF_FEATURE_NPIV_MODE)) {
+	if (!unit && !(allow_lun_scan && npiv)) {
 		put_device(&port->dev);
 		return -ENXIO;
 	}
@@ -159,7 +159,7 @@ static int zfcp_scsi_slave_alloc(struct scsi_device *sdev)
 	spin_lock_init(&zfcp_sdev->latencies.lock);
 
 	zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_RUNNING);
-	zfcp_erp_lun_reopen(sdev, 0, "scsla_1", NULL);
+	zfcp_erp_lun_reopen(sdev, 0, "scsla_1");
 	zfcp_erp_wait(port->adapter);
 
 	return 0;
@@ -183,8 +183,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
 	old_req = zfcp_reqlist_find(adapter->req_list, old_reqid);
 	if (!old_req) {
 		write_unlock_irqrestore(&adapter->abort_lock, flags);
-		zfcp_dbf_scsi_abort("lte1", adapter->dbf, scpnt, NULL,
-				    old_reqid);
+		zfcp_dbf_scsi_abort("abrt_or", scpnt, NULL);
 		return FAILED; /* completion could be in progress */
 	}
 	old_req->data = NULL;
@@ -199,29 +198,32 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
 
 		zfcp_erp_wait(adapter);
 		ret = fc_block_scsi_eh(scpnt);
-		if (ret)
+		if (ret) {
+			zfcp_dbf_scsi_abort("abrt_bl", scpnt, NULL);
 			return ret;
+		}
 		if (!(atomic_read(&adapter->status) &
 		      ZFCP_STATUS_COMMON_RUNNING)) {
-			zfcp_dbf_scsi_abort("nres", adapter->dbf, scpnt, NULL,
-					    old_reqid);
+			zfcp_dbf_scsi_abort("abrt_ru", scpnt, NULL);
 			return SUCCESS;
 		}
 	}
-	if (!abrt_req)
+	if (!abrt_req) {
+		zfcp_dbf_scsi_abort("abrt_ar", scpnt, NULL);
 		return FAILED;
+	}
 
 	wait_for_completion(&abrt_req->completion);
 
 	if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED)
-		dbf_tag = "okay";
+		dbf_tag = "abrt_ok";
 	else if (abrt_req->status & ZFCP_STATUS_FSFREQ_ABORTNOTNEEDED)
-		dbf_tag = "lte2";
+		dbf_tag = "abrt_nn";
 	else {
-		dbf_tag = "fail";
+		dbf_tag = "abrt_fa";
 		retval = FAILED;
 	}
-	zfcp_dbf_scsi_abort(dbf_tag, adapter->dbf, scpnt, abrt_req, old_reqid);
+	zfcp_dbf_scsi_abort(dbf_tag, scpnt, abrt_req);
 	zfcp_fsf_req_free(abrt_req);
 	return retval;
 }
@@ -281,7 +283,7 @@ static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
 	struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
 	int ret;
 
-	zfcp_erp_adapter_reopen(adapter, 0, "schrh_1", scpnt);
+	zfcp_erp_adapter_reopen(adapter, 0, "schrh_1");
 	zfcp_erp_wait(adapter);
 	ret = fc_block_scsi_eh(scpnt);
 	if (ret)
@@ -519,7 +521,7 @@ static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport)
 	port = zfcp_get_port_by_wwpn(adapter, rport->port_name);
 
 	if (port) {
-		zfcp_erp_port_forced_reopen(port, 0, "sctrpi1", NULL);
+		zfcp_erp_port_forced_reopen(port, 0, "sctrpi1");
 		put_device(&port->dev);
 	}
 }
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index 2f2c54f4718..cdc4ff78a7b 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -105,8 +105,7 @@ static ssize_t zfcp_sysfs_port_failed_store(struct device *dev,
 		return -EINVAL;
 
 	zfcp_erp_set_port_status(port, ZFCP_STATUS_COMMON_RUNNING);
-	zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, "sypfai2",
-			     NULL);
+	zfcp_erp_port_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED, "sypfai2");
 	zfcp_erp_wait(port->adapter);
 
 	return count;
@@ -148,7 +147,7 @@ static ssize_t zfcp_sysfs_unit_failed_store(struct device *dev,
 	if (sdev) {
 		zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_RUNNING);
 		zfcp_erp_lun_reopen(sdev, ZFCP_STATUS_COMMON_ERP_FAILED,
-				    "syufai2", NULL);
+				    "syufai2");
 		zfcp_erp_wait(unit->port->adapter);
 	} else
 		zfcp_unit_scsi_scan(unit);
@@ -198,7 +197,7 @@ static ssize_t zfcp_sysfs_adapter_failed_store(struct device *dev,
 
 	zfcp_erp_set_adapter_status(adapter, ZFCP_STATUS_COMMON_RUNNING);
 	zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
-				"syafai2", NULL);
+				"syafai2");
 	zfcp_erp_wait(adapter);
 out:
 	zfcp_ccw_adapter_put(adapter);
@@ -256,7 +255,7 @@ static ssize_t zfcp_sysfs_port_remove_store(struct device *dev,
 
 	put_device(&port->dev);
 
-	zfcp_erp_port_shutdown(port, 0, "syprs_1", NULL);
+	zfcp_erp_port_shutdown(port, 0, "syprs_1");
 	zfcp_device_unregister(&port->dev, &zfcp_sysfs_port_attrs);
  out:
 	zfcp_ccw_adapter_put(adapter);
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index fcf08b3f52c..b7bd5b0cc7a 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1765,7 +1765,7 @@ out:
 } /* End twa_scsi_eh_reset() */
 
 /* This is the main scsi queue function to handle scsi opcodes */
-static int twa_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int twa_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	int request_id, retval;
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
@@ -1812,6 +1812,8 @@ out:
 	return retval;
 } /* End twa_scsi_queue() */
 
+static DEF_SCSI_QCMD(twa_scsi_queue)
+
 /* This function hands scsi cdb's to the firmware */
 static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id, char *cdb, int use_sg, TW_SG_Entry *sglistarg)
 {
diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index 6a95d111d20..13e39e1fdfe 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -1501,7 +1501,7 @@ out:
 } /* End twl_scsi_eh_reset() */
 
 /* This is the main scsi queue function to handle scsi opcodes */
-static int twl_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int twl_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	int request_id, retval;
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
@@ -1536,6 +1536,8 @@ out:
 	return retval;
 } /* End twl_scsi_queue() */
 
+static DEF_SCSI_QCMD(twl_scsi_queue)
+
 /* This function tells the controller to shut down */
 static void __twl_shutdown(TW_Device_Extension *tw_dev)
 {
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index b1125341f4c..7fe96ff60c5 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -1947,7 +1947,7 @@ static int tw_scsiop_test_unit_ready_complete(TW_Device_Extension *tw_dev, int r
 } /* End tw_scsiop_test_unit_ready_complete() */
 
 /* This is the main scsi queue function to handle scsi opcodes */
-static int tw_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) 
+static int tw_scsi_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	unsigned char *command = SCpnt->cmnd;
 	int request_id = 0;
@@ -2023,6 +2023,8 @@ static int tw_scsi_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd
 	return retval;
 } /* End tw_scsi_queue() */
 
+static DEF_SCSI_QCMD(tw_scsi_queue)
+
 /* This function is the interrupt service routine */
 static irqreturn_t tw_interrupt(int irq, void *dev_instance) 
 {
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
index 89fc1c8af86..f672491774e 100644
--- a/drivers/scsi/53c700.c
+++ b/drivers/scsi/53c700.c
@@ -167,7 +167,7 @@ MODULE_LICENSE("GPL");
 #include "53c700_d.h"
 
 
-STATIC int NCR_700_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+STATIC int NCR_700_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *);
 STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt);
 STATIC int NCR_700_bus_reset(struct scsi_cmnd * SCpnt);
 STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
@@ -1749,8 +1749,8 @@ NCR_700_intr(int irq, void *dev_id)
 	return IRQ_RETVAL(handled);
 }
 
-STATIC int
-NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
+static int
+NCR_700_queuecommand_lck(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
 {
 	struct NCR_700_Host_Parameters *hostdata = 
 		(struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
@@ -1904,6 +1904,8 @@ NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+STATIC DEF_SCSI_QCMD(NCR_700_queuecommand)
+
 STATIC int
 NCR_700_abort(struct scsi_cmnd * SCp)
 {
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index fc0b4b81d55..f66c33b9ab4 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -2807,7 +2807,7 @@ static int BusLogic_host_reset(struct scsi_cmnd * SCpnt)
   Outgoing Mailbox for execution by the associated Host Adapter.
 */
 
-static int BusLogic_QueueCommand(struct scsi_cmnd *Command, void (*CompletionRoutine) (struct scsi_cmnd *))
+static int BusLogic_QueueCommand_lck(struct scsi_cmnd *Command, void (*CompletionRoutine) (struct scsi_cmnd *))
 {
 	struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Command->device->host->hostdata;
 	struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[Command->device->id];
@@ -2994,6 +2994,7 @@ static int BusLogic_QueueCommand(struct scsi_cmnd *Command, void (*CompletionRou
 	return 0;
 }
 
+static DEF_SCSI_QCMD(BusLogic_QueueCommand)
 
 #if 0
 /*
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
index 73f237a1ed9..649fcb31f26 100644
--- a/drivers/scsi/BusLogic.h
+++ b/drivers/scsi/BusLogic.h
@@ -1319,7 +1319,7 @@ static inline void BusLogic_IncrementSizeBucket(BusLogic_CommandSizeBuckets_T Co
 */
 
 static const char *BusLogic_DriverInfo(struct Scsi_Host *);
-static int BusLogic_QueueCommand(struct scsi_cmnd *, void (*CompletionRoutine) (struct scsi_cmnd *));
+static int BusLogic_QueueCommand(struct Scsi_Host *h, struct scsi_cmnd *);
 static int BusLogic_BIOSDiskParameters(struct scsi_device *, struct block_device *, sector_t, int *);
 static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *, char *, char **, off_t, int, int);
 static int BusLogic_SlaveConfigure(struct scsi_device *);
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 5d2f148889a..9a5629f94f9 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -952,7 +952,7 @@ static void NCR5380_exit(struct Scsi_Host *instance)
  *	Locks: host lock taken by caller
  */
 
-static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *)) 
+static int NCR5380_queue_command_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 {
 	struct Scsi_Host *instance = cmd->device->host;
 	struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
@@ -1021,6 +1021,7 @@ static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(NCR5380_queue_command)
 
 /**
  *	NCR5380_main	-	NCR state machines
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index bdc468c9e1d..fd40a32b1f6 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -313,7 +313,7 @@ static void NCR5380_print(struct Scsi_Host *instance);
 #endif
 static int NCR5380_abort(Scsi_Cmnd * cmd);
 static int NCR5380_bus_reset(Scsi_Cmnd * cmd);
-static int NCR5380_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
+static int NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int __maybe_unused NCR5380_proc_info(struct Scsi_Host *instance,
 	char *buffer, char **start, off_t offset, int length, int inout);
 
diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c
index 6961f78742a..c91888a0a23 100644
--- a/drivers/scsi/NCR53c406a.c
+++ b/drivers/scsi/NCR53c406a.c
@@ -693,7 +693,7 @@ static void wait_intr(void)
 }
 #endif
 
-static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int NCR53c406a_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 {
 	int i;
 
@@ -726,6 +726,8 @@ static int NCR53c406a_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(NCR53c406a_queue)
+
 static int NCR53c406a_host_reset(Scsi_Cmnd * SCpnt)
 {
 	DEB(printk("NCR53c406a_reset called\n"));
diff --git a/drivers/scsi/a100u2w.c b/drivers/scsi/a100u2w.c
index dbbc601948e..dc5ac6e528c 100644
--- a/drivers/scsi/a100u2w.c
+++ b/drivers/scsi/a100u2w.c
@@ -911,7 +911,7 @@ static int inia100_build_scb(struct orc_host * host, struct orc_scb * scb, struc
  *	queue the command down to the controller
  */
 
-static int inia100_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
+static int inia100_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
 {
 	struct orc_scb *scb;
 	struct orc_host *host;		/* Point to Host adapter control block */
@@ -930,6 +930,8 @@ static int inia100_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd
 	return 0;
 }
 
+static DEF_SCSI_QCMD(inia100_queue)
+
 /*****************************************************************************
  Function name  : inia100_abort
  Description    : Abort a queued command.
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 29c0ed1cf50..2c93d9496d6 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -248,7 +248,7 @@ static struct aac_driver_ident aac_drivers[] = {
  *	TODO: unify with aac_scsi_cmd().
  */
 
-static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int aac_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct aac_dev *dev = (struct aac_dev *)host->hostdata;
@@ -267,6 +267,8 @@ static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd
 	return (aac_scsi_cmd(cmd) ? FAILED : 0);
 }
 
+static DEF_SCSI_QCMD(aac_queuecommand)
+
 /**
  *	aac_info		-	Returns the host adapter name
  *	@shost:		Scsi host to report on
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 0ec3da6f3e1..081c6de92bc 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -9500,7 +9500,7 @@ static int asc_execute_scsi_cmnd(struct scsi_cmnd *scp)
  * in the 'scp' result field.
  */
 static int
-advansys_queuecommand(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
+advansys_queuecommand_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *shost = scp->device->host;
 	int asc_res, result = 0;
@@ -9525,6 +9525,8 @@ advansys_queuecommand(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
 	return result;
 }
 
+static DEF_SCSI_QCMD(advansys_queuecommand)
+
 static ushort __devinit AscGetEisaChipCfg(PortAddr iop_base)
 {
 	PortAddr eisa_cfg_iop = (PortAddr) ASC_GET_EISA_SLOT(iop_base) |
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index 8eab8587ff2..c5169f01c1c 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -1056,7 +1056,7 @@ static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct completion *complete,
  *  queue a command
  *
  */
-static int aha152x_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int aha152x_queue_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 {
 #if 0
 	if(*SCpnt->cmnd == REQUEST_SENSE) {
@@ -1070,6 +1070,8 @@ static int aha152x_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 	return aha152x_internal_queue(SCpnt, NULL, 0, done);
 }
 
+static DEF_SCSI_QCMD(aha152x_queue)
+
 
 /*
  *  
diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index 4f785f254c1..195823a51aa 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -558,7 +558,7 @@ static void aha1542_intr_handle(struct Scsi_Host *shost)
 	};
 }
 
-static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int aha1542_queuecommand_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 {
 	unchar ahacmd = CMD_START_SCSI;
 	unchar direction;
@@ -718,6 +718,8 @@ static int aha1542_queuecommand(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(aha1542_queuecommand)
+
 /* Initialize mailboxes */
 static void setup_mailboxes(int bse, struct Scsi_Host *shpnt)
 {
diff --git a/drivers/scsi/aha1542.h b/drivers/scsi/aha1542.h
index 1db538552d5..b871d2b57f9 100644
--- a/drivers/scsi/aha1542.h
+++ b/drivers/scsi/aha1542.h
@@ -132,7 +132,7 @@ struct ccb {			/* Command Control Block 5.3 */
 };
 
 static int aha1542_detect(struct scsi_host_template *);
-static int aha1542_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int aha1542_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int aha1542_bus_reset(Scsi_Cmnd * SCpnt);
 static int aha1542_dev_reset(Scsi_Cmnd * SCpnt);
 static int aha1542_host_reset(Scsi_Cmnd * SCpnt);
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index 0107a4cc333..d058f1ab82b 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -331,7 +331,7 @@ static irqreturn_t aha1740_intr_handle(int irq, void *dev_id)
 	return IRQ_RETVAL(handled);
 }
 
-static int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
+static int aha1740_queuecommand_lck(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
 {
 	unchar direction;
 	unchar *cmd = (unchar *) SCpnt->cmnd;
@@ -503,6 +503,8 @@ static int aha1740_queuecommand(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(aha1740_queuecommand)
+
 /* Query the board for its irq_level and irq_type.  Nothing else matters
    in enhanced mode on an EISA bus. */
 
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 88ad8482ef5..25d06662447 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -573,7 +573,7 @@ ahd_linux_info(struct Scsi_Host *host)
  * Queue an SCB to the controller.
  */
 static int
-ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
+ahd_linux_queue_lck(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 {
 	struct	 ahd_softc *ahd;
 	struct	 ahd_linux_device *dev = scsi_transport_device_data(cmd->device);
@@ -588,6 +588,8 @@ ahd_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 	return rtn;
 }
 
+static DEF_SCSI_QCMD(ahd_linux_queue)
+
 static struct scsi_target **
 ahd_linux_target_in_softc(struct scsi_target *starget)
 {
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index aeea7a61478..4a359bb307c 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -528,7 +528,7 @@ ahc_linux_info(struct Scsi_Host *host)
  * Queue an SCB to the controller.
  */
 static int
-ahc_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
+ahc_linux_queue_lck(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 {
 	struct	 ahc_softc *ahc;
 	struct	 ahc_linux_device *dev = scsi_transport_device_data(cmd->device);
@@ -548,6 +548,8 @@ ahc_linux_queue(struct scsi_cmnd * cmd, void (*scsi_done) (struct scsi_cmnd *))
 	return rtn;
 }
 
+static DEF_SCSI_QCMD(ahc_linux_queue)
+
 static inline struct scsi_target **
 ahc_linux_target_in_softc(struct scsi_target *starget)
 {
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index aee73fafccc..4ff60a08df0 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -10234,7 +10234,7 @@ static void aic7xxx_buildscb(struct aic7xxx_host *p, struct scsi_cmnd *cmd,
  * Description:
  *   Queue a SCB to the controller.
  *-F*************************************************************************/
-static int aic7xxx_queue(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
+static int aic7xxx_queue_lck(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 {
   struct aic7xxx_host *p;
   struct aic7xxx_scb *scb;
@@ -10292,6 +10292,8 @@ static int aic7xxx_queue(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
   return (0);
 }
 
+static DEF_SCSI_QCMD(aic7xxx_queue)
+
 /*+F*************************************************************************
  * Function:
  *   aic7xxx_bus_device_reset
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 05a78e515a2..1cadcd6b7da 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -85,8 +85,7 @@ static int arcmsr_abort(struct scsi_cmnd *);
 static int arcmsr_bus_reset(struct scsi_cmnd *);
 static int arcmsr_bios_param(struct scsi_device *sdev,
 		struct block_device *bdev, sector_t capacity, int *info);
-static int arcmsr_queue_command(struct scsi_cmnd *cmd,
-					void (*done) (struct scsi_cmnd *));
+static int arcmsr_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static int arcmsr_probe(struct pci_dev *pdev,
 				const struct pci_device_id *id);
 static void arcmsr_remove(struct pci_dev *pdev);
@@ -1172,9 +1171,8 @@ static int arcmsr_build_ccb(struct AdapterControlBlock *acb,
 	arcmsr_cdb->msgPages = arccdbsize/0x100 + (arccdbsize % 0x100 ? 1 : 0);
 	if ( arccdbsize > 256)
 		arcmsr_cdb->Flags |= ARCMSR_CDB_FLAG_SGL_BSIZE;
-	if (pcmd->cmnd[0]|WRITE_6 || pcmd->cmnd[0]|WRITE_10 || pcmd->cmnd[0]|WRITE_12 ){
+	if (pcmd->sc_data_direction == DMA_TO_DEVICE)
 		arcmsr_cdb->Flags |= ARCMSR_CDB_FLAG_WRITE;
-	}
 	ccb->arc_cdb_size = arccdbsize;
 	return SUCCESS;
 }
@@ -2081,7 +2079,7 @@ static void arcmsr_handle_virtual_command(struct AdapterControlBlock *acb,
 	}
 }
 
-static int arcmsr_queue_command(struct scsi_cmnd *cmd,
+static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd,
 	void (* done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = cmd->device->host;
@@ -2124,6 +2122,8 @@ static int arcmsr_queue_command(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(arcmsr_queue_command)
+
 static bool arcmsr_get_hba_config(struct AdapterControlBlock *acb)
 {
 	struct MessageUnit_A __iomem *reg = acb->pmuA;
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index 918ccf81875..ec166726b31 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -2511,7 +2511,7 @@ acornscsi_intr(int irq, void *dev_id)
  *	      done - function called on completion, with pointer to command descriptor
  * Returns  : 0, or < 0 on error.
  */
-int acornscsi_queuecmd(struct scsi_cmnd *SCpnt,
+static int acornscsi_queuecmd_lck(struct scsi_cmnd *SCpnt,
 		       void (*done)(struct scsi_cmnd *))
 {
     AS_Host *host = (AS_Host *)SCpnt->device->host->hostdata;
@@ -2561,6 +2561,8 @@ int acornscsi_queuecmd(struct scsi_cmnd *SCpnt,
     return 0;
 }
 
+DEF_SCSI_QCMD(acornscsi_queuecmd)
+
 /*
  * Prototype: void acornscsi_reportstatus(struct scsi_cmnd **SCpntp1, struct scsi_cmnd **SCpntp2, int result)
  * Purpose  : pass a result to *SCpntp1, and check if *SCpntp1 = *SCpntp2
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 9e71ac61114..2b2ce21e227 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2198,7 +2198,7 @@ no_command:
  * Returns: 0 on success, else error.
  * Notes: io_request_lock is held, interrupts are disabled.
  */
-int fas216_queue_command(struct scsi_cmnd *SCpnt,
+static int fas216_queue_command_lck(struct scsi_cmnd *SCpnt,
 			 void (*done)(struct scsi_cmnd *))
 {
 	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
@@ -2240,6 +2240,8 @@ int fas216_queue_command(struct scsi_cmnd *SCpnt,
 	return result;
 }
 
+DEF_SCSI_QCMD(fas216_queue_command)
+
 /**
  * fas216_internal_done - trigger restart of a waiting thread in fas216_noqueue_command
  * @SCpnt: Command to wake
@@ -2263,7 +2265,7 @@ static void fas216_internal_done(struct scsi_cmnd *SCpnt)
  * Returns: scsi result code.
  * Notes: io_request_lock is held, interrupts are disabled.
  */
-int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
+static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
 			   void (*done)(struct scsi_cmnd *))
 {
 	FAS216_Info *info = (FAS216_Info *)SCpnt->device->host->hostdata;
@@ -2277,7 +2279,7 @@ int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
 	BUG_ON(info->scsi.irq != NO_IRQ);
 
 	info->internal_done = 0;
-	fas216_queue_command(SCpnt, fas216_internal_done);
+	fas216_queue_command_lck(SCpnt, fas216_internal_done);
 
 	/*
 	 * This wastes time, since we can't return until the command is
@@ -2310,6 +2312,8 @@ int fas216_noqueue_command(struct scsi_cmnd *SCpnt,
 	return 0;
 }
 
+DEF_SCSI_QCMD(fas216_noqueue_command)
+
 /*
  * Error handler timeout function.  Indicate that we timed out,
  * and wake up any error handler process so it can continue.
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index b65f4cf0eec..f30f8d659dc 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -331,23 +331,21 @@ extern int fas216_init (struct Scsi_Host *instance);
  */
 extern int fas216_add (struct Scsi_Host *instance, struct device *dev);
 
-/* Function: int fas216_queue_command(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+/* Function: int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
  * Purpose : queue a command for adapter to process.
- * Params  : SCpnt - Command to queue
- *	     done  - done function to call once command is complete
+ * Params  : h - host adapter
+ *	   : SCpnt - Command to queue
  * Returns : 0 - success, else error
  */
-extern int fas216_queue_command(struct scsi_cmnd *,
-				void (*done)(struct scsi_cmnd *));
+extern int fas216_queue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);
 
-/* Function: int fas216_noqueue_command(istruct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+/* Function: int fas216_noqueue_command(struct Scsi_Host *h, struct scsi_cmnd *SCpnt)
  * Purpose : queue a command for adapter to process, and process it to completion.
- * Params  : SCpnt - Command to queue
- *	     done  - done function to call once command is complete
+ * Params  : h - host adapter
+ *	   : SCpnt - Command to queue
  * Returns : 0 - success, else error
  */
-extern int fas216_noqueue_command(struct scsi_cmnd *,
-				  void (*done)(struct scsi_cmnd *));
+extern int fas216_noqueue_command(struct Scsi_Host *, struct scsi_cmnd *);
 
 /* Function: irqreturn_t fas216_intr (FAS216_Info *info)
  * Purpose : handle interrupts from the interface to progress a command
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 158ebc3644d..88b2928b4d3 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -910,7 +910,7 @@ static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
  *
  */
 
-static int NCR5380_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
+static int NCR5380_queue_command_lck(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
 {
 	SETUP_HOSTDATA(cmd->device->host);
 	Scsi_Cmnd *tmp;
@@ -1022,6 +1022,8 @@ static int NCR5380_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(NCR5380_queue_command)
+
 /*
  * Function : NCR5380_main (void)
  *
diff --git a/drivers/scsi/atari_scsi.c b/drivers/scsi/atari_scsi.c
index ad7a23aef0e..3e8658e2f15 100644
--- a/drivers/scsi/atari_scsi.c
+++ b/drivers/scsi/atari_scsi.c
@@ -572,23 +572,6 @@ static void falcon_get_lock(void)
 }
 
 
-/* This is the wrapper function for NCR5380_queue_command(). It just
- * tries to get the lock on the ST-DMA (see above) and then calls the
- * original function.
- */
-
-#if 0
-int atari_queue_command(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
-{
-	/* falcon_get_lock();
-	 * ++guenther: moved to NCR5380_queue_command() to prevent
-	 * race condition, see there for an explanation.
-	 */
-	return NCR5380_queue_command(cmd, done);
-}
-#endif
-
-
 int __init atari_scsi_detect(struct scsi_host_template *host)
 {
 	static int called = 0;
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index ab5bdda6903..76029d570be 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -605,7 +605,7 @@ handled:
  *
  *	Queue a command to the ATP queue. Called with the host lock held.
  */
-static int atp870u_queuecommand(struct scsi_cmnd * req_p, 
+static int atp870u_queuecommand_lck(struct scsi_cmnd *req_p,
 			 void (*done) (struct scsi_cmnd *))
 {
 	unsigned char c;
@@ -694,6 +694,8 @@ static int atp870u_queuecommand(struct scsi_cmnd * req_p,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(atp870u_queuecommand)
+
 /**
  *	send_s870	-	send a command to the controller
  *	@host: host
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 75a85aa9e88..79cefbe3136 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -3785,7 +3785,7 @@ static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
 	dma_addr_t paddr;
 
 	io_task->cmd_bhs = pci_pool_alloc(beiscsi_sess->bhs_pool,
-					  GFP_KERNEL, &paddr);
+					  GFP_ATOMIC, &paddr);
 	if (!io_task->cmd_bhs)
 		return -ENOMEM;
 	io_task->bhs_pa.u.a64.address = paddr;
@@ -3914,7 +3914,8 @@ static void beiscsi_cleanup_task(struct iscsi_task *task)
 			io_task->psgl_handle = NULL;
 		}
 	} else {
-		if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN)
+		if (task->hdr &&
+		   ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN))
 			return;
 		if (io_task->psgl_handle) {
 			spin_lock(&phba->mgmt_sgl_lock);
diff --git a/drivers/scsi/bfa/Makefile b/drivers/scsi/bfa/Makefile
index d2eefd3e3bd..4ce6f494232 100644
--- a/drivers/scsi/bfa/Makefile
+++ b/drivers/scsi/bfa/Makefile
@@ -3,6 +3,4 @@ obj-$(CONFIG_SCSI_BFA_FC) := bfa.o
 bfa-y := bfad.o bfad_im.o bfad_attr.o bfad_debugfs.o
 bfa-y += bfa_ioc.o bfa_ioc_cb.o bfa_ioc_ct.o bfa_hw_cb.o bfa_hw_ct.o
 bfa-y += bfa_fcs.o bfa_fcs_lport.o bfa_fcs_rport.o bfa_fcs_fcpim.o bfa_fcbuild.o
-bfa-y += bfa_port.o bfa_fcpim.o bfa_core.o bfa_drv.o bfa_svc.o
-
-ccflags-y := -DBFA_PERF_BUILD
+bfa-y += bfa_port.o bfa_fcpim.o bfa_core.o bfa_svc.o
diff --git a/drivers/scsi/bfa/bfa.h b/drivers/scsi/bfa/bfa.h
index ff2bd07161f..7be6b5a8114 100644
--- a/drivers/scsi/bfa/bfa.h
+++ b/drivers/scsi/bfa/bfa.h
@@ -17,7 +17,7 @@
 #ifndef __BFA_H__
 #define __BFA_H__
 
-#include "bfa_os_inc.h"
+#include "bfad_drv.h"
 #include "bfa_cs.h"
 #include "bfa_plog.h"
 #include "bfa_defs_svc.h"
@@ -33,7 +33,6 @@ typedef void    (*bfa_cb_cbfn_t) (void *cbarg, bfa_boolean_t complete);
  * Interrupt message handlers
  */
 void bfa_isr_unhandled(struct bfa_s *bfa, struct bfi_msg_s *m);
-void bfa_isr_bind(enum bfi_mclass mc, bfa_isr_func_t isr_func);
 
 /*
  * Request and response queue related defines
@@ -121,8 +120,8 @@ bfa_reqq_winit(struct bfa_reqq_wait_s *wqe, void (*qresume) (void *cbarg),
 									\
 		struct list_head *waitq = bfa_reqq(__bfa, __reqq);      \
 									\
-		bfa_assert(((__reqq) < BFI_IOC_MAX_CQS));      \
-		bfa_assert((__wqe)->qresume && (__wqe)->cbarg);      \
+		WARN_ON(((__reqq) >= BFI_IOC_MAX_CQS));			\
+		WARN_ON(!((__wqe)->qresume && (__wqe)->cbarg));		\
 									\
 		list_add_tail(&(__wqe)->qe, waitq);      \
 	} while (0)
@@ -297,7 +296,6 @@ void bfa_iocfc_attach(struct bfa_s *bfa, void *bfad,
 		      struct bfa_iocfc_cfg_s *cfg,
 		      struct bfa_meminfo_s *meminfo,
 		      struct bfa_pcidev_s *pcidev);
-void bfa_iocfc_detach(struct bfa_s *bfa);
 void bfa_iocfc_init(struct bfa_s *bfa);
 void bfa_iocfc_start(struct bfa_s *bfa);
 void bfa_iocfc_stop(struct bfa_s *bfa);
@@ -333,12 +331,9 @@ void bfa_hwct_msix_getvecs(struct bfa_s *bfa, u32 *vecmap, u32 *nvecs,
 			   u32 *maxvec);
 void bfa_hwct_msix_get_rme_range(struct bfa_s *bfa, u32 *start,
 				 u32 *end);
-void bfa_com_port_attach(struct bfa_s *bfa, struct bfa_meminfo_s *mi);
 void bfa_iocfc_get_bootwwns(struct bfa_s *bfa, u8 *nwwns, wwn_t *wwns);
 wwn_t bfa_iocfc_get_pwwn(struct bfa_s *bfa);
 wwn_t bfa_iocfc_get_nwwn(struct bfa_s *bfa);
-void bfa_iocfc_get_pbc_boot_cfg(struct bfa_s *bfa,
-				struct bfa_boot_pbc_s *pbcfg);
 int bfa_iocfc_get_pbc_vports(struct bfa_s *bfa,
 				struct bfi_pbc_vport_s *pbc_vport);
 
@@ -386,19 +381,11 @@ void bfa_cfg_get_meminfo(struct bfa_iocfc_cfg_s *cfg,
 void bfa_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 		struct bfa_meminfo_s *meminfo,
 		struct bfa_pcidev_s *pcidev);
-void bfa_init_trc(struct bfa_s *bfa, struct bfa_trc_mod_s *trcmod);
-void bfa_init_plog(struct bfa_s *bfa, struct bfa_plog_s *plog);
 void bfa_detach(struct bfa_s *bfa);
-void bfa_init(struct bfa_s *bfa);
-void bfa_start(struct bfa_s *bfa);
-void bfa_stop(struct bfa_s *bfa);
-void bfa_attach_fcs(struct bfa_s *bfa);
 void bfa_cb_init(void *bfad, bfa_status_t status);
 void bfa_cb_updateq(void *bfad, bfa_status_t status);
 
 bfa_boolean_t bfa_intx(struct bfa_s *bfa);
-void bfa_intx_disable(struct bfa_s *bfa);
-void bfa_intx_enable(struct bfa_s *bfa);
 void bfa_isr_enable(struct bfa_s *bfa);
 void bfa_isr_disable(struct bfa_s *bfa);
 
@@ -408,31 +395,14 @@ void bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q);
 
 typedef void (*bfa_cb_ioc_t) (void *cbarg, enum bfa_status status);
 void bfa_iocfc_get_attr(struct bfa_s *bfa, struct bfa_iocfc_attr_s *attr);
-void bfa_get_attr(struct bfa_s *bfa, struct bfa_ioc_attr_s *ioc_attr);
 
-void bfa_adapter_get_attr(struct bfa_s *bfa,
-			  struct bfa_adapter_attr_s *ad_attr);
-u64 bfa_adapter_get_id(struct bfa_s *bfa);
 
 bfa_status_t bfa_iocfc_israttr_set(struct bfa_s *bfa,
 				   struct bfa_iocfc_intr_attr_s *attr);
 
 void bfa_iocfc_enable(struct bfa_s *bfa);
 void bfa_iocfc_disable(struct bfa_s *bfa);
-void bfa_chip_reset(struct bfa_s *bfa);
-void bfa_timer_tick(struct bfa_s *bfa);
 #define bfa_timer_start(_bfa, _timer, _timercb, _arg, _timeout)		\
 	bfa_timer_begin(&(_bfa)->timer_mod, _timer, _timercb, _arg, _timeout)
 
-/*
- * BFA debug API functions
- */
-bfa_status_t bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen);
-bfa_status_t bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen);
-bfa_status_t bfa_debug_fwcore(struct bfa_s *bfa, void *buf,
-			      u32 *offset, int *buflen);
-void bfa_debug_fwsave_clear(struct bfa_s *bfa);
-bfa_status_t bfa_fw_stats_get(struct bfa_s *bfa, void *data);
-bfa_status_t bfa_fw_stats_clear(struct bfa_s *bfa);
-
 #endif /* __BFA_H__ */
diff --git a/drivers/scsi/bfa/bfa_cb_ioim.h b/drivers/scsi/bfa/bfa_cb_ioim.h
deleted file mode 100644
index 6f021015f1f..00000000000
--- a/drivers/scsi/bfa/bfa_cb_ioim.h
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFA_HCB_IOIM_H__
-#define __BFA_HCB_IOIM_H__
-
-#include "bfa_os_inc.h"
-/*
- * task attribute values in FCP-2 FCP_CMND IU
- */
-#define SIMPLE_Q    0
-#define HEAD_OF_Q   1
-#define ORDERED_Q   2
-#define ACA_Q	    4
-#define UNTAGGED    5
-
-static inline lun_t
-bfad_int_to_lun(u32 luno)
-{
-	union {
-		u16	scsi_lun[4];
-		lun_t		bfa_lun;
-	} lun;
-
-	lun.bfa_lun     = 0;
-	lun.scsi_lun[0] = cpu_to_be16(luno);
-
-	return lun.bfa_lun;
-}
-
-/*
- * Get LUN for the I/O request
- */
-#define bfa_cb_ioim_get_lun(__dio)	\
-	bfad_int_to_lun(((struct scsi_cmnd *)__dio)->device->lun)
-
-/*
- * Get CDB for the I/O request
- */
-static inline u8 *
-bfa_cb_ioim_get_cdb(struct bfad_ioim_s *dio)
-{
-	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
-
-	return (u8 *) cmnd->cmnd;
-}
-
-/*
- * Get I/O direction (read/write) for the I/O request
- */
-static inline enum fcp_iodir
-bfa_cb_ioim_get_iodir(struct bfad_ioim_s *dio)
-{
-	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
-	enum dma_data_direction dmadir;
-
-	dmadir = cmnd->sc_data_direction;
-	if (dmadir == DMA_TO_DEVICE)
-		return FCP_IODIR_WRITE;
-	else if (dmadir == DMA_FROM_DEVICE)
-		return FCP_IODIR_READ;
-	else
-		return FCP_IODIR_NONE;
-}
-
-/*
- * Get IO size in bytes for the I/O request
- */
-static inline u32
-bfa_cb_ioim_get_size(struct bfad_ioim_s *dio)
-{
-	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
-
-	return scsi_bufflen(cmnd);
-}
-
-/*
- * Get timeout for the I/O request
- */
-static inline u8
-bfa_cb_ioim_get_timeout(struct bfad_ioim_s *dio)
-{
-	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
-	/*
-	 * TBD: need a timeout for scsi passthru
-	 */
-	if (cmnd->device->host == NULL)
-		return 4;
-
-	return 0;
-}
-
-/*
- * Get Command Reference Number for the I/O request. 0 if none.
- */
-static inline u8
-bfa_cb_ioim_get_crn(struct bfad_ioim_s *dio)
-{
-	return 0;
-}
-
-/*
- * Get SAM-3 priority for the I/O request. 0 is default.
- */
-static inline u8
-bfa_cb_ioim_get_priority(struct bfad_ioim_s *dio)
-{
-	return 0;
-}
-
-/*
- * Get task attributes for the I/O request. Default is FCP_TASK_ATTR_SIMPLE(0).
- */
-static inline u8
-bfa_cb_ioim_get_taskattr(struct bfad_ioim_s *dio)
-{
-	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
-	u8	task_attr = UNTAGGED;
-
-	if (cmnd->device->tagged_supported) {
-		switch (cmnd->tag) {
-		case HEAD_OF_QUEUE_TAG:
-			task_attr = HEAD_OF_Q;
-			break;
-		case ORDERED_QUEUE_TAG:
-			task_attr = ORDERED_Q;
-			break;
-		default:
-			task_attr = SIMPLE_Q;
-			break;
-		}
-	}
-
-	return task_attr;
-}
-
-/*
- * Get CDB length in bytes for the I/O request. Default is FCP_CMND_CDB_LEN(16).
- */
-static inline u8
-bfa_cb_ioim_get_cdblen(struct bfad_ioim_s *dio)
-{
-	struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
-
-	return cmnd->cmd_len;
-}
-
-/*
- * Assign queue to be used for the I/O request. This value depends on whether
- * the driver wants to use the queues via any specific algorithm. Currently,
- * this is not supported.
- */
-#define bfa_cb_ioim_get_reqq(__dio) BFA_FALSE
-
-#endif /* __BFA_HCB_IOIM_H__ */
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 2345f48dc57..1cd5c8b0618 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -15,13 +15,100 @@
  * General Public License for more details.
  */
 
+#include "bfad_drv.h"
 #include "bfa_modules.h"
 #include "bfi_ctreg.h"
-#include "bfad_drv.h"
 
 BFA_TRC_FILE(HAL, CORE);
 
 /*
+ * BFA module list terminated by NULL
+ */
+static struct bfa_module_s *hal_mods[] = {
+	&hal_mod_sgpg,
+	&hal_mod_fcport,
+	&hal_mod_fcxp,
+	&hal_mod_lps,
+	&hal_mod_uf,
+	&hal_mod_rport,
+	&hal_mod_fcpim,
+	NULL
+};
+
+/*
+ * Message handlers for various modules.
+ */
+static bfa_isr_func_t  bfa_isrs[BFI_MC_MAX] = {
+	bfa_isr_unhandled,	/* NONE */
+	bfa_isr_unhandled,	/* BFI_MC_IOC */
+	bfa_isr_unhandled,	/* BFI_MC_DIAG */
+	bfa_isr_unhandled,	/* BFI_MC_FLASH */
+	bfa_isr_unhandled,	/* BFI_MC_CEE */
+	bfa_fcport_isr,		/* BFI_MC_FCPORT */
+	bfa_isr_unhandled,	/* BFI_MC_IOCFC */
+	bfa_isr_unhandled,	/* BFI_MC_LL */
+	bfa_uf_isr,		/* BFI_MC_UF */
+	bfa_fcxp_isr,		/* BFI_MC_FCXP */
+	bfa_lps_isr,		/* BFI_MC_LPS */
+	bfa_rport_isr,		/* BFI_MC_RPORT */
+	bfa_itnim_isr,		/* BFI_MC_ITNIM */
+	bfa_isr_unhandled,	/* BFI_MC_IOIM_READ */
+	bfa_isr_unhandled,	/* BFI_MC_IOIM_WRITE */
+	bfa_isr_unhandled,	/* BFI_MC_IOIM_IO */
+	bfa_ioim_isr,		/* BFI_MC_IOIM */
+	bfa_ioim_good_comp_isr,	/* BFI_MC_IOIM_IOCOM */
+	bfa_tskim_isr,		/* BFI_MC_TSKIM */
+	bfa_isr_unhandled,	/* BFI_MC_SBOOT */
+	bfa_isr_unhandled,	/* BFI_MC_IPFC */
+	bfa_isr_unhandled,	/* BFI_MC_PORT */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+	bfa_isr_unhandled,	/* --------- */
+};
+/*
+ * Message handlers for mailbox command classes
+ */
+static bfa_ioc_mbox_mcfunc_t  bfa_mbox_isrs[BFI_MC_MAX] = {
+	NULL,
+	NULL,		/* BFI_MC_IOC   */
+	NULL,		/* BFI_MC_DIAG  */
+	NULL,		/* BFI_MC_FLASH */
+	NULL,		/* BFI_MC_CEE   */
+	NULL,		/* BFI_MC_PORT  */
+	bfa_iocfc_isr,	/* BFI_MC_IOCFC */
+	NULL,
+};
+
+
+
+static void
+bfa_com_port_attach(struct bfa_s *bfa, struct bfa_meminfo_s *mi)
+{
+	struct bfa_port_s	*port = &bfa->modules.port;
+	u32			dm_len;
+	u8			*dm_kva;
+	u64			dm_pa;
+
+	dm_len = bfa_port_meminfo();
+	dm_kva = bfa_meminfo_dma_virt(mi);
+	dm_pa  = bfa_meminfo_dma_phys(mi);
+
+	memset(port, 0, sizeof(struct bfa_port_s));
+	bfa_port_attach(port, &bfa->ioc, bfa, bfa->trcmod);
+	bfa_port_mem_claim(port, dm_kva, dm_pa);
+
+	bfa_meminfo_dma_virt(mi) = dm_kva + dm_len;
+	bfa_meminfo_dma_phys(mi) = dm_pa + dm_len;
+}
+
+/*
  * BFA IOC FC related definitions
  */
 
@@ -67,18 +154,6 @@ static struct bfa_ioc_cbfn_s bfa_iocfc_cbfn;
  * BFA Interrupt handling functions
  */
 static void
-bfa_msix_errint(struct bfa_s *bfa, u32 intr)
-{
-	bfa_ioc_error_isr(&bfa->ioc);
-}
-
-static void
-bfa_msix_lpu(struct bfa_s *bfa)
-{
-	bfa_ioc_mbox_isr(&bfa->ioc);
-}
-
-static void
 bfa_reqq_resume(struct bfa_s *bfa, int qid)
 {
 	struct list_head *waitq, *qe, *qen;
@@ -104,9 +179,6 @@ bfa_msix_all(struct bfa_s *bfa, int vec)
 	bfa_intx(bfa);
 }
 
-/*
- *  hal_intr_api
- */
 bfa_boolean_t
 bfa_intx(struct bfa_s *bfa)
 {
@@ -151,18 +223,6 @@ bfa_intx(struct bfa_s *bfa)
 }
 
 void
-bfa_intx_enable(struct bfa_s *bfa)
-{
-	writel(bfa->iocfc.intr_mask, bfa->iocfc.bfa_regs.intr_mask);
-}
-
-void
-bfa_intx_disable(struct bfa_s *bfa)
-{
-	writel(-1L, bfa->iocfc.bfa_regs.intr_mask);
-}
-
-void
 bfa_isr_enable(struct bfa_s *bfa)
 {
 	u32 intr_unmask;
@@ -225,7 +285,7 @@ bfa_isr_unhandled(struct bfa_s *bfa, struct bfi_msg_s *m)
 	bfa_trc(bfa, m->mhdr.msg_class);
 	bfa_trc(bfa, m->mhdr.msg_id);
 	bfa_trc(bfa, m->mhdr.mtag.i2htok);
-	bfa_assert(0);
+	WARN_ON(1);
 	bfa_trc_stop(bfa->trcmod);
 }
 
@@ -236,8 +296,6 @@ bfa_msix_rspq(struct bfa_s *bfa, int qid)
 	u32 pi, ci;
 	struct list_head *waitq;
 
-	bfa_trc_fp(bfa, qid);
-
 	qid &= (BFI_IOC_MAX_CQS - 1);
 
 	bfa->iocfc.hwif.hw_rspq_ack(bfa, qid);
@@ -245,16 +303,10 @@ bfa_msix_rspq(struct bfa_s *bfa, int qid)
 	ci = bfa_rspq_ci(bfa, qid);
 	pi = bfa_rspq_pi(bfa, qid);
 
-	bfa_trc_fp(bfa, ci);
-	bfa_trc_fp(bfa, pi);
-
 	if (bfa->rme_process) {
 		while (ci != pi) {
 			m = bfa_rspq_elem(bfa, qid, ci);
-			bfa_assert_fp(m->mhdr.msg_class < BFI_MC_MAX);
-
 			bfa_isrs[m->mhdr.msg_class] (bfa, m);
-
 			CQ_INCR(ci, bfa->iocfc.cfg.drvcfg.num_rspq_elems);
 		}
 	}
@@ -282,7 +334,7 @@ bfa_msix_lpu_err(struct bfa_s *bfa, int vec)
 	intr = readl(bfa->iocfc.bfa_regs.intr_status);
 
 	if (intr & (__HFN_INT_MBOX_LPU0 | __HFN_INT_MBOX_LPU1))
-		bfa_msix_lpu(bfa);
+		bfa_ioc_mbox_isr(&bfa->ioc);
 
 	intr &= (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 |
 		__HFN_INT_ERR_LPU1 | __HFN_INT_ERR_PSS | __HFN_INT_LL_HALT);
@@ -313,22 +365,16 @@ bfa_msix_lpu_err(struct bfa_s *bfa, int vec)
 		}
 
 		writel(intr, bfa->iocfc.bfa_regs.intr_status);
-		bfa_msix_errint(bfa, intr);
+		bfa_ioc_error_isr(&bfa->ioc);
 	}
 }
 
-void
-bfa_isr_bind(enum bfi_mclass mc, bfa_isr_func_t isr_func)
-{
-	bfa_isrs[mc] = isr_func;
-}
-
 /*
  * BFA IOC FC related functions
  */
 
 /*
- *  hal_ioc_pvt BFA IOC private functions
+ *  BFA IOC private functions
  */
 
 static void
@@ -379,7 +425,7 @@ bfa_iocfc_send_cfg(void *bfa_arg)
 	struct bfa_iocfc_cfg_s	*cfg = &iocfc->cfg;
 	int		i;
 
-	bfa_assert(cfg->fwcfg.num_cqs <= BFI_IOC_MAX_CQS);
+	WARN_ON(cfg->fwcfg.num_cqs > BFI_IOC_MAX_CQS);
 	bfa_trc(bfa, cfg->fwcfg.num_cqs);
 
 	bfa_iocfc_reset_queues(bfa);
@@ -488,8 +534,8 @@ bfa_iocfc_mem_claim(struct bfa_s *bfa, struct bfa_iocfc_cfg_s *cfg,
 	 * First allocate dma memory for IOC.
 	 */
 	bfa_ioc_mem_claim(&bfa->ioc, dm_kva, dm_pa);
-	dm_kva += bfa_ioc_meminfo();
-	dm_pa  += bfa_ioc_meminfo();
+	dm_kva += BFA_ROUNDUP(sizeof(struct bfi_ioc_attr_s), BFA_DMA_ALIGN_SZ);
+	dm_pa  += BFA_ROUNDUP(sizeof(struct bfi_ioc_attr_s), BFA_DMA_ALIGN_SZ);
 
 	/*
 	 * Claim DMA-able memory for the request/response queues and for shadow
@@ -552,7 +598,7 @@ bfa_iocfc_mem_claim(struct bfa_s *bfa, struct bfa_iocfc_cfg_s *cfg,
 	bfa_meminfo_dma_virt(meminfo) = dm_kva;
 	bfa_meminfo_dma_phys(meminfo) = dm_pa;
 
-	dbgsz = bfa_ioc_debug_trcsz(bfa_auto_recover);
+	dbgsz = (bfa_auto_recover) ? BFA_DBG_FWTRC_LEN : 0;
 	if (dbgsz > 0) {
 		bfa_ioc_debug_memclaim(&bfa->ioc, bfa_meminfo_kva(meminfo));
 		bfa_meminfo_kva(meminfo) += dbgsz;
@@ -699,7 +745,7 @@ bfa_iocfc_disable_cbfn(void *bfa_arg)
 		bfa_cb_queue(bfa, &bfa->iocfc.stop_hcb_qe, bfa_iocfc_stop_cb,
 			     bfa);
 	else {
-		bfa_assert(bfa->iocfc.action == BFA_IOCFC_ACT_DISABLE);
+		WARN_ON(bfa->iocfc.action != BFA_IOCFC_ACT_DISABLE);
 		bfa_cb_queue(bfa, &bfa->iocfc.dis_hcb_qe, bfa_iocfc_disable_cb,
 			     bfa);
 	}
@@ -735,9 +781,6 @@ bfa_iocfc_reset_cbfn(void *bfa_arg)
 	bfa_isr_enable(bfa);
 }
 
-/*
- *  hal_ioc_public
- */
 
 /*
  * Query IOC memory requirement information.
@@ -747,11 +790,11 @@ bfa_iocfc_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
 		  u32 *dm_len)
 {
 	/* dma memory for IOC */
-	*dm_len += bfa_ioc_meminfo();
+	*dm_len += BFA_ROUNDUP(sizeof(struct bfi_ioc_attr_s), BFA_DMA_ALIGN_SZ);
 
 	bfa_iocfc_fw_cfg_sz(cfg, dm_len);
 	bfa_iocfc_cqs_sz(cfg, dm_len);
-	*km_len += bfa_ioc_debug_trcsz(bfa_auto_recover);
+	*km_len += (bfa_auto_recover) ? BFA_DBG_FWTRC_LEN : 0;
 }
 
 /*
@@ -783,7 +826,7 @@ bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 
 	bfa_iocfc_init_mem(bfa, bfad, cfg, pcidev);
 	bfa_iocfc_mem_claim(bfa, cfg, meminfo);
-	bfa_timer_init(&bfa->timer_mod);
+	INIT_LIST_HEAD(&bfa->timer_mod.timer_q);
 
 	INIT_LIST_HEAD(&bfa->comp_q);
 	for (i = 0; i < BFI_IOC_MAX_CQS; i++)
@@ -794,15 +837,6 @@ bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
  * Query IOC memory requirement information.
  */
 void
-bfa_iocfc_detach(struct bfa_s *bfa)
-{
-	bfa_ioc_detach(&bfa->ioc);
-}
-
-/*
- * Query IOC memory requirement information.
- */
-void
 bfa_iocfc_init(struct bfa_s *bfa)
 {
 	bfa->iocfc.action = BFA_IOCFC_ACT_INIT;
@@ -852,23 +886,11 @@ bfa_iocfc_isr(void *bfaarg, struct bfi_mbmsg_s *m)
 		iocfc->updateq_cbfn(iocfc->updateq_cbarg, BFA_STATUS_OK);
 		break;
 	default:
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
 
 void
-bfa_adapter_get_attr(struct bfa_s *bfa, struct bfa_adapter_attr_s *ad_attr)
-{
-	bfa_ioc_get_adapter_attr(&bfa->ioc, ad_attr);
-}
-
-u64
-bfa_adapter_get_id(struct bfa_s *bfa)
-{
-	return bfa_ioc_get_adid(&bfa->ioc);
-}
-
-void
 bfa_iocfc_get_attr(struct bfa_s *bfa, struct bfa_iocfc_attr_s *attr)
 {
 	struct bfa_iocfc_s	*iocfc = &bfa->iocfc;
@@ -976,18 +998,6 @@ bfa_iocfc_get_bootwwns(struct bfa_s *bfa, u8 *nwwns, wwn_t *wwns)
 	memcpy(wwns, cfgrsp->bootwwns.wwn, sizeof(cfgrsp->bootwwns.wwn));
 }
 
-void
-bfa_iocfc_get_pbc_boot_cfg(struct bfa_s *bfa, struct bfa_boot_pbc_s *pbcfg)
-{
-	struct bfa_iocfc_s *iocfc = &bfa->iocfc;
-	struct bfi_iocfc_cfgrsp_s *cfgrsp = iocfc->cfgrsp;
-
-	pbcfg->enable = cfgrsp->pbc_cfg.boot_enabled;
-	pbcfg->nbluns = cfgrsp->pbc_cfg.nbluns;
-	pbcfg->speed = cfgrsp->pbc_cfg.port_speed;
-	memcpy(pbcfg->pblun, cfgrsp->pbc_cfg.blun, sizeof(pbcfg->pblun));
-}
-
 int
 bfa_iocfc_get_pbc_vports(struct bfa_s *bfa, struct bfi_pbc_vport_s *pbc_vport)
 {
@@ -998,9 +1008,6 @@ bfa_iocfc_get_pbc_vports(struct bfa_s *bfa, struct bfi_pbc_vport_s *pbc_vport)
 	return cfgrsp->pbc_cfg.nvports;
 }
 
-/*
- *  hal_api
- */
 
 /*
  * Use this function query the memory requirement of the BFA library.
@@ -1036,7 +1043,7 @@ bfa_cfg_get_meminfo(struct bfa_iocfc_cfg_s *cfg, struct bfa_meminfo_s *meminfo)
 	int		i;
 	u32	km_len = 0, dm_len = 0;
 
-	bfa_assert((cfg != NULL) && (meminfo != NULL));
+	WARN_ON((cfg == NULL) || (meminfo == NULL));
 
 	memset((void *)meminfo, 0, sizeof(struct bfa_meminfo_s));
 	meminfo->meminfo[BFA_MEM_TYPE_KVA - 1].mem_type =
@@ -1090,7 +1097,7 @@ bfa_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 
 	bfa->fcs = BFA_FALSE;
 
-	bfa_assert((cfg != NULL) && (meminfo != NULL));
+	WARN_ON((cfg == NULL) || (meminfo == NULL));
 
 	/*
 	 * initialize all memory pointers for iterative allocation
@@ -1129,79 +1136,7 @@ bfa_detach(struct bfa_s *bfa)
 
 	for (i = 0; hal_mods[i]; i++)
 		hal_mods[i]->detach(bfa);
-
-	bfa_iocfc_detach(bfa);
-}
-
-
-void
-bfa_init_trc(struct bfa_s *bfa, struct bfa_trc_mod_s *trcmod)
-{
-	bfa->trcmod = trcmod;
-}
-
-void
-bfa_init_plog(struct bfa_s *bfa, struct bfa_plog_s *plog)
-{
-	bfa->plog = plog;
-}
-
-/*
- * Initialize IOC.
- *
- * This function will return immediately, when the IOC initialization is
- * completed, the bfa_cb_init() will be called.
- *
- * @param[in]	bfa	instance
- *
- * @return void
- *
- * Special Considerations:
- *
- * @note
- * When this function returns, the driver should register the interrupt service
- * routine(s) and enable the device interrupts. If this is not done,
- * bfa_cb_init() will never get called
- */
-void
-bfa_init(struct bfa_s *bfa)
-{
-	bfa_iocfc_init(bfa);
-}
-
-/*
- * Use this function initiate the IOC configuration setup. This function
- * will return immediately.
- *
- * @param[in]	bfa	instance
- *
- * @return None
- */
-void
-bfa_start(struct bfa_s *bfa)
-{
-	bfa_iocfc_start(bfa);
-}
-
-/*
- * Use this function quiese the IOC. This function will return immediately,
- * when the IOC is actually stopped, the bfad->comp will be set.
- *
- * @param[in]bfa - pointer to bfa_t.
- *
- * @return None
- *
- * Special Considerations:
- * bfad->comp can be set before or after bfa_stop() returns.
- *
- * @note
- * In case of any failure, we could handle it automatically by doing a
- * reset and then succeed the bfa_stop() call.
- */
-void
-bfa_stop(struct bfa_s *bfa)
-{
-	bfa_iocfc_stop(bfa);
+	bfa_ioc_detach(&bfa->ioc);
 }
 
 void
@@ -1237,20 +1172,6 @@ bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q)
 	}
 }
 
-void
-bfa_attach_fcs(struct bfa_s *bfa)
-{
-	bfa->fcs = BFA_TRUE;
-}
-
-/*
- * Periodic timer heart beat from driver
- */
-void
-bfa_timer_tick(struct bfa_s *bfa)
-{
-	bfa_timer_beat(&bfa->timer_mod);
-}
 
 /*
  * Return the list of PCI vendor/device id lists supported by this
@@ -1321,89 +1242,3 @@ bfa_cfg_get_min(struct bfa_iocfc_cfg_s *cfg)
 	cfg->drvcfg.num_rspq_elems = BFA_RSPQ_NELEMS_MIN;
 	cfg->drvcfg.min_cfg	   = BFA_TRUE;
 }
-
-void
-bfa_get_attr(struct bfa_s *bfa, struct bfa_ioc_attr_s *ioc_attr)
-{
-	bfa_ioc_get_attr(&bfa->ioc, ioc_attr);
-}
-
-/*
- * Retrieve firmware trace information on IOC failure.
- */
-bfa_status_t
-bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen)
-{
-	return bfa_ioc_debug_fwsave(&bfa->ioc, trcdata, trclen);
-}
-
-/*
- * Clear the saved firmware trace information of an IOC.
- */
-void
-bfa_debug_fwsave_clear(struct bfa_s *bfa)
-{
-	bfa_ioc_debug_fwsave_clear(&bfa->ioc);
-}
-
-/*
- * Fetch firmware trace data.
- *
- * @param[in]		bfa			BFA instance
- * @param[out]		trcdata		Firmware trace buffer
- * @param[in,out]	trclen		Firmware trace buffer len
- *
- * @retval BFA_STATUS_OK			Firmware trace is fetched.
- * @retval BFA_STATUS_INPROGRESS	Firmware trace fetch is in progress.
- */
-bfa_status_t
-bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen)
-{
-	return bfa_ioc_debug_fwtrc(&bfa->ioc, trcdata, trclen);
-}
-
-/*
- * Dump firmware memory.
- *
- * @param[in]		bfa		BFA instance
- * @param[out]		buf		buffer for dump
- * @param[in,out]	offset		smem offset to start read
- * @param[in,out]	buflen		length of buffer
- *
- * @retval BFA_STATUS_OK		Firmware memory is dumped.
- * @retval BFA_STATUS_INPROGRESS	Firmware memory dump is in progress.
- */
-bfa_status_t
-bfa_debug_fwcore(struct bfa_s *bfa, void *buf, u32 *offset, int *buflen)
-{
-	return bfa_ioc_debug_fwcore(&bfa->ioc, buf, offset, buflen);
-}
-/*
- * Reset hw semaphore & usage cnt regs and initialize.
- */
-void
-bfa_chip_reset(struct bfa_s *bfa)
-{
-	bfa_ioc_ownership_reset(&bfa->ioc);
-	bfa_ioc_pll_init(&bfa->ioc);
-}
-
-/*
- * Fetch firmware statistics data.
- *
- * @param[in]		bfa		BFA instance
- * @param[out]		data		Firmware stats buffer
- *
- * @retval BFA_STATUS_OK		Firmware trace is fetched.
- */
-bfa_status_t
-bfa_fw_stats_get(struct bfa_s *bfa, void *data)
-{
-	return bfa_ioc_fw_stats_get(&bfa->ioc, data);
-}
-
-bfa_status_t
-bfa_fw_stats_clear(struct bfa_s *bfa)
-{
-	return bfa_ioc_fw_stats_clear(&bfa->ioc);
-}
diff --git a/drivers/scsi/bfa/bfa_cs.h b/drivers/scsi/bfa/bfa_cs.h
index 99f242b9aa3..12bfeed268e 100644
--- a/drivers/scsi/bfa/bfa_cs.h
+++ b/drivers/scsi/bfa/bfa_cs.h
@@ -22,7 +22,7 @@
 #ifndef __BFA_CS_H__
 #define __BFA_CS_H__
 
-#include "bfa_os_inc.h"
+#include "bfad_drv.h"
 
 /*
  * BFA TRC
@@ -32,12 +32,20 @@
 #define BFA_TRC_MAX	(4 * 1024)
 #endif
 
+#define BFA_TRC_TS(_trcm)                               \
+	({                                              \
+		struct timeval tv;                      \
+							\
+		do_gettimeofday(&tv);                   \
+		(tv.tv_sec*1000000+tv.tv_usec);         \
+	})
+
 #ifndef BFA_TRC_TS
 #define BFA_TRC_TS(_trcm)	((_trcm)->ticks++)
 #endif
 
 struct bfa_trc_s {
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 	u16	fileno;
 	u16	line;
 #else
@@ -99,13 +107,6 @@ bfa_trc_stop(struct bfa_trc_mod_s *trcm)
 	trcm->stopped = 1;
 }
 
-#ifdef FWTRC
-extern void dc_flush(void *data);
-#else
-#define dc_flush(data)
-#endif
-
-
 static inline void
 __bfa_trc(struct bfa_trc_mod_s *trcm, int fileno, int line, u64 data)
 {
@@ -119,12 +120,10 @@ __bfa_trc(struct bfa_trc_mod_s *trcm, int fileno, int line, u64 data)
 	trc->line = (u16) line;
 	trc->data.u64 = data;
 	trc->timestamp = BFA_TRC_TS(trcm);
-	dc_flush(trc);
 
 	trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
 	if (trcm->tail == trcm->head)
 		trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
-	dc_flush(trcm);
 }
 
 
@@ -141,42 +140,18 @@ __bfa_trc32(struct bfa_trc_mod_s *trcm, int fileno, int line, u32 data)
 	trc->line = (u16) line;
 	trc->data.u32.u32 = data;
 	trc->timestamp = BFA_TRC_TS(trcm);
-	dc_flush(trc);
 
 	trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
 	if (trcm->tail == trcm->head)
 		trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
-	dc_flush(trcm);
 }
 
-#ifndef BFA_PERF_BUILD
-#define bfa_trc_fp(_trcp, _data)	bfa_trc(_trcp, _data)
-#else
-#define bfa_trc_fp(_trcp, _data)
-#endif
-
-/*
- * @ BFA LOG interfaces
- */
-#define bfa_assert(__cond)	do {					\
-	if (!(__cond)) {						\
-		printk(KERN_ERR "assert(%s) failed at %s:%d\\n",         \
-		#__cond, __FILE__, __LINE__);				\
-	}								\
-} while (0)
-
 #define bfa_sm_fault(__mod, __event)	do {				\
 	bfa_trc(__mod, (((u32)0xDEAD << 16) | __event));		\
 	printk(KERN_ERR	"Assertion failure: %s:%d: %d",			\
 		__FILE__, __LINE__, (__event));				\
 } while (0)
 
-#ifndef BFA_PERF_BUILD
-#define bfa_assert_fp(__cond)	bfa_assert(__cond)
-#else
-#define bfa_assert_fp(__cond)
-#endif
-
 /* BFA queue definitions */
 #define bfa_q_first(_q) ((void *)(((struct list_head *) (_q))->next))
 #define bfa_q_next(_qe) (((struct list_head *) (_qe))->next)
@@ -199,7 +174,6 @@ __bfa_trc32(struct bfa_trc_mod_s *trcm, int fileno, int line, u32 data)
 		bfa_q_prev(bfa_q_next(*((struct list_head **) _qe))) =	\
 				(struct list_head *) (_q);		\
 		bfa_q_next(_q) = bfa_q_next(*((struct list_head **) _qe));\
-		BFA_Q_DBG_INIT(*((struct list_head **) _qe));		\
 	} else {							\
 		*((struct list_head **) (_qe)) = (struct list_head *) NULL;\
 	}								\
@@ -214,7 +188,6 @@ __bfa_trc32(struct bfa_trc_mod_s *trcm, int fileno, int line, u32 data)
 		bfa_q_next(bfa_q_prev(*((struct list_head **) _qe))) =	\
 			(struct list_head *) (_q);			\
 		bfa_q_prev(_q) = bfa_q_prev(*(struct list_head **) _qe);\
-		BFA_Q_DBG_INIT(*((struct list_head **) _qe));		\
 	} else {							\
 		*((struct list_head **) (_qe)) = (struct list_head *) NULL;\
 	}								\
@@ -236,16 +209,6 @@ bfa_q_is_on_q_func(struct list_head *q, struct list_head *qe)
 	return 0;
 }
 
-/*
- * #ifdef BFA_DEBUG (Using bfa_assert to check for debug_build is not
- * consistent across modules)
- */
-#ifndef BFA_PERF_BUILD
-#define BFA_Q_DBG_INIT(_qe) bfa_q_qe_init(_qe)
-#else
-#define BFA_Q_DBG_INIT(_qe)
-#endif
-
 #define bfa_q_is_on_q(_q, _qe)      \
 	bfa_q_is_on_q_func(_q, (struct list_head *)(_qe))
 
@@ -361,4 +324,43 @@ bfa_wc_wait(struct bfa_wc_s *wc)
 	bfa_wc_down(wc);
 }
 
+static inline void
+wwn2str(char *wwn_str, u64 wwn)
+{
+	union {
+		u64 wwn;
+		u8 byte[8];
+	} w;
+
+	w.wwn = wwn;
+	sprintf(wwn_str, "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x", w.byte[0],
+		w.byte[1], w.byte[2], w.byte[3], w.byte[4], w.byte[5],
+		w.byte[6], w.byte[7]);
+}
+
+static inline void
+fcid2str(char *fcid_str, u32 fcid)
+{
+	union {
+		u32 fcid;
+		u8 byte[4];
+	} f;
+
+	f.fcid = fcid;
+	sprintf(fcid_str, "%02x:%02x:%02x", f.byte[1], f.byte[2], f.byte[3]);
+}
+
+#define bfa_swap_3b(_x)				\
+	((((_x) & 0xff) << 16) |		\
+	((_x) & 0x00ff00) |			\
+	(((_x) & 0xff0000) >> 16))
+
+#ifndef __BIG_ENDIAN
+#define bfa_hton3b(_x)  bfa_swap_3b(_x)
+#else
+#define bfa_hton3b(_x)  (_x)
+#endif
+
+#define bfa_ntoh3b(_x)  bfa_hton3b(_x)
+
 #endif /* __BFA_CS_H__ */
diff --git a/drivers/scsi/bfa/bfa_defs.h b/drivers/scsi/bfa/bfa_defs.h
index 4b5b9e35abb..d85f93aea46 100644
--- a/drivers/scsi/bfa/bfa_defs.h
+++ b/drivers/scsi/bfa/bfa_defs.h
@@ -19,7 +19,7 @@
 #define __BFA_DEFS_H__
 
 #include "bfa_fc.h"
-#include "bfa_os_inc.h"
+#include "bfad_drv.h"
 
 #define BFA_MFG_SERIALNUM_SIZE                  11
 #define STRSZ(_n)                               (((_n) + 4) & ~3)
@@ -446,8 +446,8 @@ enum bfa_boot_bootopt {
  * Boot lun information.
  */
 struct bfa_boot_bootlun_s {
-	wwn_t   pwwn;   /*  port wwn of target */
-	lun_t   lun;    /*  64-bit lun */
+	wwn_t   pwwn;		/*  port wwn of target */
+	struct scsi_lun   lun;  /*  64-bit lun */
 };
 #pragma pack()
 
diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h
index e24e9f7ca81..648c8417672 100644
--- a/drivers/scsi/bfa/bfa_defs_svc.h
+++ b/drivers/scsi/bfa/bfa_defs_svc.h
@@ -34,8 +34,8 @@
 struct bfa_iocfc_intr_attr_s {
 	u8		coalesce;	/*  enable/disable coalescing */
 	u8		rsvd[3];
-	u16	latency;	/*  latency in microseconds   */
-	u16	delay;		/*  delay in microseconds     */
+	__be16	latency;	/*  latency in microseconds   */
+	__be16	delay;		/*  delay in microseconds     */
 };
 
 /*
@@ -743,7 +743,7 @@ struct bfa_port_cfg_s {
 	u8	 qos_enabled;	/*  qos enabled or not		*/
 	u8	 cfg_hardalpa;	/*  is hard alpa configured	*/
 	u8	 hardalpa;	/*  configured hard alpa	*/
-	u16 maxfrsize;	/*  maximum frame size		*/
+	__be16	 maxfrsize;	/*  maximum frame size		*/
 	u8	 rx_bbcredit;	/*  receive buffer credits	*/
 	u8	 tx_bbcredit;	/*  transmit buffer credits	*/
 	u8	 ratelimit;	/*  ratelimit enabled or not	*/
@@ -843,7 +843,7 @@ struct bfa_fcport_fcf_s {
 	u8	 fka_disabled;   /*  FKA is disabled	  */
 	u8	 maxsz_verified; /*  FCoE max size verified   */
 	u8	 fc_map[3];      /*  FC map		   */
-	u16	vlan;	   /*  FCoE vlan tag/priority   */
+	__be16	 vlan;	   /*  FCoE vlan tag/priority   */
 	u32	fka_adv_per;    /*  FIP  ka advert. period   */
 	mac_t	   mac;	    /*  FCF mac		  */
 };
diff --git a/drivers/scsi/bfa/bfa_drv.c b/drivers/scsi/bfa/bfa_drv.c
deleted file mode 100644
index 0222d7c88a9..00000000000
--- a/drivers/scsi/bfa/bfa_drv.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#include "bfa_modules.h"
-
-/*
- * BFA module list terminated by NULL
- */
-struct bfa_module_s *hal_mods[] = {
-	&hal_mod_sgpg,
-	&hal_mod_fcport,
-	&hal_mod_fcxp,
-	&hal_mod_lps,
-	&hal_mod_uf,
-	&hal_mod_rport,
-	&hal_mod_fcpim,
-	NULL
-};
-
-/*
- * Message handlers for various modules.
- */
-bfa_isr_func_t  bfa_isrs[BFI_MC_MAX] = {
-	bfa_isr_unhandled,	/* NONE */
-	bfa_isr_unhandled,	/* BFI_MC_IOC */
-	bfa_isr_unhandled,	/* BFI_MC_DIAG */
-	bfa_isr_unhandled,	/* BFI_MC_FLASH */
-	bfa_isr_unhandled,	/* BFI_MC_CEE */
-	bfa_fcport_isr,		/* BFI_MC_FCPORT */
-	bfa_isr_unhandled,	/* BFI_MC_IOCFC */
-	bfa_isr_unhandled,	/* BFI_MC_LL */
-	bfa_uf_isr,		/* BFI_MC_UF */
-	bfa_fcxp_isr,		/* BFI_MC_FCXP */
-	bfa_lps_isr,		/* BFI_MC_LPS */
-	bfa_rport_isr,		/* BFI_MC_RPORT */
-	bfa_itnim_isr,		/* BFI_MC_ITNIM */
-	bfa_isr_unhandled,	/* BFI_MC_IOIM_READ */
-	bfa_isr_unhandled,	/* BFI_MC_IOIM_WRITE */
-	bfa_isr_unhandled,	/* BFI_MC_IOIM_IO */
-	bfa_ioim_isr,		/* BFI_MC_IOIM */
-	bfa_ioim_good_comp_isr,	/* BFI_MC_IOIM_IOCOM */
-	bfa_tskim_isr,		/* BFI_MC_TSKIM */
-	bfa_isr_unhandled,	/* BFI_MC_SBOOT */
-	bfa_isr_unhandled,	/* BFI_MC_IPFC */
-	bfa_isr_unhandled,	/* BFI_MC_PORT */
-	bfa_isr_unhandled,	/* --------- */
-	bfa_isr_unhandled,	/* --------- */
-	bfa_isr_unhandled,	/* --------- */
-	bfa_isr_unhandled,	/* --------- */
-	bfa_isr_unhandled,	/* --------- */
-	bfa_isr_unhandled,	/* --------- */
-	bfa_isr_unhandled,	/* --------- */
-	bfa_isr_unhandled,	/* --------- */
-	bfa_isr_unhandled,	/* --------- */
-	bfa_isr_unhandled,	/* --------- */
-};
-
-
-/*
- * Message handlers for mailbox command classes
- */
-bfa_ioc_mbox_mcfunc_t  bfa_mbox_isrs[BFI_MC_MAX] = {
-	NULL,
-	NULL,			/* BFI_MC_IOC   */
-	NULL,			/* BFI_MC_DIAG  */
-	NULL,		/* BFI_MC_FLASH */
-	NULL,			/* BFI_MC_CEE   */
-	NULL,			/* BFI_MC_PORT  */
-	bfa_iocfc_isr,		/* BFI_MC_IOCFC */
-	NULL,
-};
-
-
-
-void
-bfa_com_port_attach(struct bfa_s *bfa, struct bfa_meminfo_s *mi)
-{
-	struct bfa_port_s	*port = &bfa->modules.port;
-	u32		dm_len;
-	u8			*dm_kva;
-	u64		dm_pa;
-
-	dm_len = bfa_port_meminfo();
-	dm_kva = bfa_meminfo_dma_virt(mi);
-	dm_pa  = bfa_meminfo_dma_phys(mi);
-
-	memset(port, 0, sizeof(struct bfa_port_s));
-	bfa_port_attach(port, &bfa->ioc, bfa, bfa->trcmod);
-	bfa_port_mem_claim(port, dm_kva, dm_pa);
-
-	bfa_meminfo_dma_virt(mi) = dm_kva + dm_len;
-	bfa_meminfo_dma_phys(mi) = dm_pa + dm_len;
-}
diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h
index e929d25b09e..8e764fae8dc 100644
--- a/drivers/scsi/bfa/bfa_fc.h
+++ b/drivers/scsi/bfa/bfa_fc.h
@@ -18,14 +18,12 @@
 #ifndef __BFA_FC_H__
 #define __BFA_FC_H__
 
-#include "bfa_os_inc.h"
+#include "bfad_drv.h"
 
 typedef u64 wwn_t;
-typedef u64 lun_t;
 
 #define WWN_NULL	(0)
 #define FC_SYMNAME_MAX	256	/*  max name server symbolic name size */
-#define FC_ALPA_MAX	128
 
 #pragma pack(1)
 
@@ -40,7 +38,6 @@ struct mac_s { u8 mac[MAC_ADDRLEN]; };
 struct scsi_cdb_s {
 	u8         scsi_cdb[SCSI_MAX_CDBLEN];
 };
-#define scsi_cdb_t struct scsi_cdb_s
 
 /* ------------------------------------------------------------
  * SCSI status byte values
@@ -63,7 +60,7 @@ struct scsi_cdb_s {
  * Fibre Channel Header Structure (FCHS) definition
  */
 struct fchs_s {
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 	u32        routing:4;	/* routing bits */
 	u32        cat_info:4;	/* category info */
 #else
@@ -75,34 +72,19 @@ struct fchs_s {
 	u32        cs_ctl:8;	/* class specific control */
 	u32        s_id:24;	/* source identifier */
 
-	u32        type:8;		/* data structure type */
+	u32        type:8;	/* data structure type */
 	u32        f_ctl:24;	/* initial frame control */
 
-	u8         seq_id;		/* sequence identifier */
-	u8         df_ctl;		/* data field control */
+	u8         seq_id;	/* sequence identifier */
+	u8         df_ctl;	/* data field control */
 	u16        seq_cnt;	/* sequence count */
 
-	u16        ox_id;		/* originator exchange ID */
-	u16        rx_id;		/* responder exchange ID */
+	__be16     ox_id;	/* originator exchange ID */
+	u16        rx_id;	/* responder exchange ID */
 
 	u32        ro;		/* relative offset */
 };
 
-#define FC_SOF_LEN		4
-#define FC_EOF_LEN		4
-#define FC_CRC_LEN		4
-
-/*
- * Fibre Channel BB_E Header Structure
- */
-struct fcbbehs_s {
-	u16	ver_rsvd;
-	u32	rsvd[2];
-	u32	rsvd__sof;
-};
-
-#define FC_SEQ_ID_MAX		256
-
 /*
  * routing bit definitions
  */
@@ -149,22 +131,6 @@ enum {
 };
 
 /*
- * information category for Link Control
- */
-enum {
-	FC_CAT_ACK_1		= 0x00,
-	FC_CAT_ACK_0_N		= 0x01,
-	FC_CAT_P_RJT		= 0x02,
-	FC_CAT_F_RJT		= 0x03,
-	FC_CAT_P_BSY		= 0x04,
-	FC_CAT_F_BSY_DATA	= 0x05,
-	FC_CAT_F_BSY_LINK_CTL	= 0x06,
-	FC_CAT_F_LCR		= 0x07,
-	FC_CAT_NTY		= 0x08,
-	FC_CAT_END		= 0x09,
-};
-
-/*
  * Type Field Definitions. FC-PH Section 18.5 pg. 165
  */
 enum {
@@ -182,10 +148,6 @@ enum {
 	FC_TYPE_MAX		= 256,	/* 256 FC-4 types */
 };
 
-struct fc_fc4types_s {
-	u8         bits[FC_TYPE_MAX / 8];
-};
-
 /*
  * Frame Control Definitions. FC-PH Table-45. pg. 168
  */
@@ -288,7 +250,6 @@ enum {
 	FC_ELS_AUTH = 0x90,	/* Authentication. Ref FC-SP */
 	FC_ELS_RFCN = 0x97,	/* Request Fabric Change Notification. Ref
 				 *FC-SP */
-
 };
 
 /*
@@ -314,12 +275,12 @@ enum {
  * FC-PH-x. Figure-76. pg. 308.
  */
 struct fc_plogi_csp_s {
-	u8         verhi;	/* FC-PH high version */
-	u8         verlo;	/* FC-PH low version */
-	u16        bbcred;	/* BB_Credit */
+	u8		verhi;		/* FC-PH high version */
+	u8		verlo;		/* FC-PH low version */
+	__be16		bbcred;		/* BB_Credit */
 
-#ifdef __BIGENDIAN
-	u8         ciro:1,		/* continuously increasing RO */
+#ifdef __BIG_ENDIAN
+	u8		ciro:1,		/* continuously increasing RO */
 			rro:1,		/* random relative offset */
 			npiv_supp:1,	/* NPIV supported */
 			port_type:1,	/* N_Port/F_port */
@@ -328,7 +289,7 @@ struct fc_plogi_csp_s {
 			vvl_info:1,	/* VVL Info included */
 			reserved1:1;
 
-	u8         hg_supp:1,
+	u8		hg_supp:1,
 			query_dbc:1,
 			security:1,
 			sync_cap:1,
@@ -337,7 +298,7 @@ struct fc_plogi_csp_s {
 			cisc:1,		/* continuously increasing seq count */
 			payload:1;
 #else
-	u8         reserved2:2,
+	u8		reserved2:2,
 			resolution:1,	/* ms/ns ED_TOV resolution */
 			altbbcred:1,	/* alternate BB_Credit */
 			port_type:1,	/* N_Port/F_port */
@@ -345,7 +306,7 @@ struct fc_plogi_csp_s {
 			rro:1,		/* random relative offset */
 			ciro:1;		/* continuously increasing RO */
 
-	u8         payload:1,
+	u8		payload:1,
 			cisc:1,		/* continuously increasing seq count */
 			dh_dup_supp:1,
 			r_t_tov:1,
@@ -354,13 +315,10 @@ struct fc_plogi_csp_s {
 			query_dbc:1,
 			hg_supp:1;
 #endif
-
-	u16        rxsz;		/* recieve data_field size */
-
-	u16        conseq;
-	u16        ro_bitmap;
-
-	u32        e_d_tov;
+	__be16		rxsz;		/* recieve data_field size */
+	__be16		conseq;
+	__be16		ro_bitmap;
+	__be32		e_d_tov;
 };
 
 /*
@@ -368,12 +326,11 @@ struct fc_plogi_csp_s {
  * FC-PH-x. Figure 78. pg. 318.
  */
 struct fc_plogi_clp_s {
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 	u32        class_valid:1;
 	u32        intermix:1;	/* class intermix supported if set =1.
-					 * valid only for class1. Reserved for
-					 * class2 & class3
-					 */
+				 * valid only for class1. Reserved for
+				 * class2 & class3 */
 	u32        reserved1:2;
 	u32        sequential:1;
 	u32        reserved2:3;
@@ -382,12 +339,10 @@ struct fc_plogi_clp_s {
 	u32        sequential:1;
 	u32        reserved1:2;
 	u32        intermix:1;	/* class intermix supported if set =1.
-					 * valid only for class1. Reserved for
-					 * class2 & class3
-					 */
+				 * valid only for class1. Reserved for
+				 * class2 & class3 */
 	u32        class_valid:1;
 #endif
-
 	u32        reserved3:24;
 
 	u32        reserved4:16;
@@ -395,7 +350,7 @@ struct fc_plogi_clp_s {
 
 	u32        reserved5:8;
 	u32        conseq:8;
-	u32        e2e_credit:16;	/* end to end credit */
+	u32        e2e_credit:16; /* end to end credit */
 
 	u32        reserved7:8;
 	u32        ospx:8;
@@ -409,24 +364,24 @@ struct fc_plogi_clp_s {
  * PLOGI els command and reply payload
  */
 struct fc_logi_s {
-	struct fc_els_cmd_s els_cmd;	/* ELS command code */
-	struct fc_plogi_csp_s csp;		/* common service params */
-	wwn_t           port_name;
-	wwn_t           node_name;
-	struct fc_plogi_clp_s class1;		/* class 1 service parameters */
-	struct fc_plogi_clp_s class2;		/* class 2 service parameters */
-	struct fc_plogi_clp_s class3;		/* class 3 service parameters */
-	struct fc_plogi_clp_s class4;		/* class 4 service parameters */
-	u8         vvl[16];	/* vendor version level */
+	struct fc_els_cmd_s	els_cmd;	/* ELS command code */
+	struct fc_plogi_csp_s	csp;		/* common service params */
+	wwn_t			port_name;
+	wwn_t			node_name;
+	struct fc_plogi_clp_s	class1;		/* class 1 service parameters */
+	struct fc_plogi_clp_s	class2;		/* class 2 service parameters */
+	struct fc_plogi_clp_s	class3;		/* class 3 service parameters */
+	struct fc_plogi_clp_s	class4;		/* class 4 service parameters */
+	u8			vvl[16];	/* vendor version level */
 };
 
 /*
  * LOGO els command payload
  */
 struct fc_logo_s {
-	struct fc_els_cmd_s els_cmd;	/* ELS command code */
-	u32        res1:8;
-	u32        nport_id:24;	/* N_Port identifier of source */
+	struct fc_els_cmd_s	els_cmd;	/* ELS command code */
+	u32			res1:8;
+	u32		nport_id:24;	/* N_Port identifier of source */
 	wwn_t           orig_port_name;	/* Port name of the LOGO originator */
 };
 
@@ -435,12 +390,12 @@ struct fc_logo_s {
  */
 struct fc_adisc_s {
 	struct fc_els_cmd_s els_cmd;	/* ELS command code */
-	u32        res1:8;
-	u32        orig_HA:24;	/* originator hard address */
-	wwn_t           orig_port_name;	/* originator port name */
-	wwn_t           orig_node_name;	/* originator node name */
-	u32        res2:8;
-	u32        nport_id:24;	/* originator NPortID */
+	u32		res1:8;
+	u32		orig_HA:24;	/* originator hard address */
+	wwn_t		orig_port_name;	/* originator port name */
+	wwn_t		orig_node_name;	/* originator node name */
+	u32		res2:8;
+	u32		nport_id:24;	/* originator NPortID */
 };
 
 /*
@@ -466,7 +421,7 @@ struct fc_exch_status_blk_s {
 struct fc_res_s {
 	struct fc_els_cmd_s els_cmd;	/* ELS command code */
 	u32        res1:8;
-	u32        nport_id:24;	/* N_Port identifier of source */
+	u32        nport_id:24;		/* N_Port identifier of source */
 	u32        oxid:16;
 	u32        rxid:16;
 	u8         assoc_hdr[32];
@@ -512,8 +467,8 @@ struct fc_rec_acc_s {
 	u32        orig_id:24;	/* N_Port id of exchange originator */
 	u32        res2:8;
 	u32        resp_id:24;	/* N_Port id of exchange responder */
-	u32        count;		/* data transfer count */
-	u32        e_stat;		/* exchange status */
+	u32        count;	/* data transfer count */
+	u32        e_stat;	/* exchange status */
 };
 
 /*
@@ -533,7 +488,7 @@ struct fc_rsi_s {
  */
 struct fc_prli_params_s {
 	u32        reserved:16;
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 	u32        reserved1:5;
 	u32        rec_support:1;
 	u32        task_retry_id:1;
@@ -575,7 +530,7 @@ enum {
 struct fc_prli_params_page_s {
 	u32        type:8;
 	u32        codext:8;
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 	u32        origprocasv:1;
 	u32        rsppav:1;
 	u32        imagepair:1;
@@ -611,18 +566,14 @@ struct fc_prli_s {
 struct fc_prlo_params_page_s {
 	u32        type:8;
 	u32        type_ext:8;
-#ifdef __BIGENDIAN
-	u32        opa_valid:1;	/* originator process associator
-					 * valid
-					 */
+#ifdef __BIG_ENDIAN
+	u32        opa_valid:1;	/* originator process associator valid */
 	u32        rpa_valid:1;	/* responder process associator valid */
 	u32        res1:14;
 #else
 	u32        res1:14;
 	u32        rpa_valid:1;	/* responder process associator valid */
-	u32        opa_valid:1;	/* originator process associator
-					 * valid
-					 */
+	u32        opa_valid:1;	/* originator process associator valid */
 #endif
 	u32        orig_process_assc;
 	u32        resp_process_assc;
@@ -647,18 +598,14 @@ struct fc_prlo_acc_params_page_s {
 	u32        type:8;
 	u32        type_ext:8;
 
-#ifdef __BIGENDIAN
-	u32        opa_valid:1;	/* originator process associator
-					 * valid
-					 */
+#ifdef __BIG_ENDIAN
+	u32        opa_valid:1;	/* originator process associator valid */
 	u32        rpa_valid:1;	/* responder process associator valid */
 	u32        res1:14;
 #else
 	u32        res1:14;
 	u32        rpa_valid:1;	/* responder process associator valid */
-	u32        opa_valid:1;	/* originator process associator
-					 * valid
-					 */
+	u32        opa_valid:1;	/* originator process associator valid */
 #endif
 	u32        orig_process_assc;
 	u32        resp_process_assc;
@@ -715,9 +662,9 @@ enum {
  * LS_RJT els reply payload
  */
 struct fc_ls_rjt_s {
-	struct fc_els_cmd_s els_cmd;		/* ELS command code */
+	struct fc_els_cmd_s els_cmd;	/* ELS command code */
 	u32        res1:8;
-	u32        reason_code:8;		/* Reason code for reject */
+	u32        reason_code:8;	/* Reason code for reject */
 	u32        reason_code_expl:8;	/* Reason code explanation */
 	u32        vendor_unique:8;	/* Vendor specific */
 };
@@ -779,12 +726,12 @@ struct fc_rrq_s {
  */
 struct fc_ba_acc_s {
 	u32        seq_id_valid:8;	/* set to 0x00 for Abort Exchange */
-	u32        seq_id:8;	/* invalid for Abort Exchange */
+	u32        seq_id:8;		/* invalid for Abort Exchange */
 	u32        res2:16;
-	u32        ox_id:16;	/* OX_ID from ABTS frame */
-	u32        rx_id:16;	/* RX_ID from ABTS frame */
+	u32        ox_id:16;		/* OX_ID from ABTS frame */
+	u32        rx_id:16;		/* RX_ID from ABTS frame */
 	u32        low_seq_cnt:16;	/* set to 0x0000 for Abort Exchange */
-	u32        high_seq_cnt:16;/* set to 0xFFFF for Abort Exchange */
+	u32        high_seq_cnt:16;	/* set to 0xFFFF for Abort Exchange */
 };
 
 /*
@@ -794,17 +741,17 @@ struct fc_ba_rjt_s {
 	u32        res1:8;		/* Reserved */
 	u32        reason_code:8;	/* reason code for reject */
 	u32        reason_expl:8;	/* reason code explanation */
-	u32        vendor_unique:8;/* vendor unique reason code,set to 0 */
+	u32        vendor_unique:8; /* vendor unique reason code,set to 0 */
 };
 
 /*
  * TPRLO logout parameter page
  */
 struct fc_tprlo_params_page_s {
-u32        type:8;
-u32        type_ext:8;
+	u32        type:8;
+	u32        type_ext:8;
 
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 	u32        opa_valid:1;
 	u32        rpa_valid:1;
 	u32        tpo_nport_valid:1;
@@ -864,16 +811,16 @@ enum fc_rscn_format {
 };
 
 struct fc_rscn_event_s {
-	u32        format:2;
-	u32        qualifier:4;
-	u32        resvd:2;
-	u32        portid:24;
+	u32	format:2;
+	u32	qualifier:4;
+	u32	resvd:2;
+	u32	portid:24;
 };
 
 struct fc_rscn_pl_s {
-	u8         command;
-	u8         pagelen;
-	u16        payldlen;
+	u8	command;
+	u8	pagelen;
+	__be16	payldlen;
 	struct fc_rscn_event_s event[1];
 };
 
@@ -887,7 +834,6 @@ struct fc_echo_s {
 /*
  * RNID els command
  */
-
 #define RNID_NODEID_DATA_FORMAT_COMMON			0x00
 #define RNID_NODEID_DATA_FORMAT_FCP3			0x08
 #define RNID_NODEID_DATA_FORMAT_DISCOVERY		0xDF
@@ -920,15 +866,15 @@ struct fc_rnid_cmd_s {
  */
 
 struct fc_rnid_common_id_data_s {
-	wwn_t           port_name;
+	wwn_t		port_name;
 	wwn_t           node_name;
 };
 
 struct fc_rnid_general_topology_data_s {
 	u32        vendor_unique[4];
-	u32        asso_type;
+	__be32     asso_type;
 	u32        phy_port_num;
-	u32        num_attached_nodes;
+	__be32     num_attached_nodes;
 	u32        node_mgmt:8;
 	u32        ip_version:8;
 	u32        udp_tcp_port_num:16;
@@ -980,59 +926,17 @@ enum fc_rpsc_op_speed {
 	RPSC_OP_SPEED_8G = 0x0800,
 	RPSC_OP_SPEED_16G = 0x0400,
 
-	RPSC_OP_SPEED_NOT_EST = 0x0001,	/*! speed not established */
+	RPSC_OP_SPEED_NOT_EST = 0x0001,	/* speed not established */
 };
 
 struct fc_rpsc_speed_info_s {
-	u16        port_speed_cap;	/*! see enum fc_rpsc_speed_cap */
-	u16        port_op_speed;	/*! see enum fc_rpsc_op_speed */
-};
-
-enum link_e2e_beacon_subcmd {
-	LINK_E2E_BEACON_ON = 1,
-	LINK_E2E_BEACON_OFF = 2
-};
-
-enum beacon_type {
-	BEACON_TYPE_NORMAL	= 1,	/*! Normal Beaconing. Green */
-	BEACON_TYPE_WARN	= 2,	/*! Warning Beaconing. Yellow/Amber */
-	BEACON_TYPE_CRITICAL	= 3	/*! Critical Beaconing. Red */
-};
-
-struct link_e2e_beacon_param_s {
-	u8         beacon_type;	/* Beacon Type. See enum beacon_type */
-	u8         beacon_frequency;
-					/* Beacon frequency. Number of blinks
-					 * per 10 seconds
-					 */
-	u16        beacon_duration;/* Beacon duration (in Seconds). The
-					 * command operation should be
-					 * terminated at the end of this
-					 * timeout value.
-					 *
-					 * Ignored if diag_sub_cmd is
-					 * LINK_E2E_BEACON_OFF.
-					 *
-					 * If 0, beaconing will continue till a
-					 * BEACON OFF request is received
-					 */
-};
-
-/*
- * Link E2E beacon request/good response format.
- * For LS_RJTs use struct fc_ls_rjt_s
- */
-struct link_e2e_beacon_req_s {
-	u32        ls_code;	/*! FC_ELS_E2E_LBEACON in requests *
-					 *or FC_ELS_ACC in good replies */
-	u32        ls_sub_cmd;	/*! See enum link_e2e_beacon_subcmd */
-	struct link_e2e_beacon_param_s beacon_parm;
+	__be16        port_speed_cap;	/* see enum fc_rpsc_speed_cap */
+	__be16        port_op_speed;	/* see enum fc_rpsc_op_speed */
 };
 
 /*
  * If RPSC request is sent to the Domain Controller, the request is for
- * all the ports within that domain (TODO - I don't think FOS implements
- * this...).
+ * all the ports within that domain.
  */
 struct fc_rpsc_cmd_s {
 	struct fc_els_cmd_s els_cmd;
@@ -1056,9 +960,9 @@ struct fc_rpsc_acc_s {
 
 struct fc_rpsc2_cmd_s {
 	struct fc_els_cmd_s els_cmd;
-	u32	token;
+	__be32	token;
 	u16	resvd;
-	u16	num_pids;	/* Number of pids in the request */
+	__be16	num_pids;		/* Number of pids in the request */
 	struct  {
 		u32	rsvd1:8;
 		u32	pid:24;		/* port identifier */
@@ -1072,16 +976,17 @@ enum fc_rpsc2_port_type {
 	RPSC2_PORT_TYPE_NPIV_PORT  = 0x5f,
 	RPSC2_PORT_TYPE_NPORT_TRUNK  = 0x6f,
 };
+
 /*
  * RPSC2 portInfo entry structure
  */
 struct fc_rpsc2_port_info_s {
-    u32    pid;        /* PID */
-    u16    resvd1;
-    u16    index;      /* port number / index */
-    u8     resvd2;
-    u8	   type;	/* port type N/NL/... */
-    u16    speed;      /* port Operating Speed */
+	__be32	pid;		/* PID */
+	u16	resvd1;
+	__be16	index;		/* port number / index */
+	u8	resvd2;
+	u8	type;		/* port type N/NL/... */
+	__be16	speed;		/* port Operating Speed */
 };
 
 /*
@@ -1090,8 +995,8 @@ struct fc_rpsc2_port_info_s {
 struct fc_rpsc2_acc_s {
 	u8        els_cmd;
 	u8        resvd;
-    u16       num_pids;  /* Number of pids in the request */
-    struct fc_rpsc2_port_info_s port_info[1];    /* port information */
+	__be16    num_pids; /* Number of pids in the request */
+	struct fc_rpsc2_port_info_s port_info[1]; /* port information */
 };
 
 /*
@@ -1110,18 +1015,14 @@ struct fc_symname_s {
 	u8         symname[FC_SYMNAME_MAX];
 };
 
-struct fc_alpabm_s {
-	u8         alpa_bm[FC_ALPA_MAX / 8];
-};
-
 /*
  * protocol default timeout values
  */
-#define FC_ED_TOV		2
-#define FC_REC_TOV		(FC_ED_TOV + 1)
-#define FC_RA_TOV		10
-#define FC_ELS_TOV		(2 * FC_RA_TOV)
-#define FC_FCCT_TOV		(3 * FC_RA_TOV)
+#define FC_ED_TOV	2
+#define FC_REC_TOV	(FC_ED_TOV + 1)
+#define FC_RA_TOV	10
+#define FC_ELS_TOV	(2 * FC_RA_TOV)
+#define FC_FCCT_TOV	(3 * FC_RA_TOV)
 
 /*
  * virtual fabric related defines
@@ -1157,50 +1058,34 @@ enum {
 };
 
 /*
- * SRR FC-4 LS payload
- */
-struct fc_srr_s {
-	u32	ls_cmd;
-	u32        ox_id:16;	/* ox-id */
-	u32        rx_id:16;	/* rx-id */
-	u32        ro;		/* relative offset */
-	u32        r_ctl:8;		/* R_CTL for I.U. */
-	u32        res:24;
-};
-
-
-/*
  * FCP_CMND definitions
  */
 #define FCP_CMND_CDB_LEN    16
 #define FCP_CMND_LUN_LEN    8
 
 struct fcp_cmnd_s {
-	lun_t           lun;		/* 64-bit LU number */
-	u8         crn;		/* command reference number */
-#ifdef __BIGENDIAN
-	u8         resvd:1,
+	struct scsi_lun	lun;		/* 64-bit LU number */
+	u8		crn;		/* command reference number */
+#ifdef __BIG_ENDIAN
+	u8		resvd:1,
 			priority:4,	/* FCP-3: SAM-3 priority */
 			taskattr:3;	/* scsi task attribute */
 #else
-	u8         taskattr:3,	/* scsi task attribute */
+	u8		taskattr:3,	/* scsi task attribute */
 			priority:4,	/* FCP-3: SAM-3 priority */
 			resvd:1;
 #endif
-	u8         tm_flags;	/* task management flags */
-#ifdef __BIGENDIAN
-	u8         addl_cdb_len:6,	/* additional CDB length words */
+	u8		tm_flags;	/* task management flags */
+#ifdef __BIG_ENDIAN
+	u8		addl_cdb_len:6,	/* additional CDB length words */
 			iodir:2;	/* read/write FCP_DATA IUs */
 #else
-	u8         iodir:2,	/* read/write FCP_DATA IUs */
+	u8		iodir:2,	/* read/write FCP_DATA IUs */
 			addl_cdb_len:6;	/* additional CDB length */
 #endif
-	scsi_cdb_t      cdb;
+	struct scsi_cdb_s      cdb;
 
-	/*
-	 * !!! additional cdb bytes follows here!!!
-	 */
-	u32        fcp_dl;	/* bytes to be transferred */
+	__be32        fcp_dl;	/* bytes to be transferred */
 };
 
 #define fcp_cmnd_cdb_len(_cmnd) ((_cmnd)->addl_cdb_len * 4 + FCP_CMND_CDB_LEN)
@@ -1210,21 +1095,10 @@ struct fcp_cmnd_s {
  * struct fcp_cmnd_s .iodir field values
  */
 enum fcp_iodir {
-	FCP_IODIR_NONE	= 0,
+	FCP_IODIR_NONE  = 0,
 	FCP_IODIR_WRITE = 1,
-	FCP_IODIR_READ	= 2,
-	FCP_IODIR_RW	= 3,
-};
-
-/*
- * Task attribute field
- */
-enum {
-	FCP_TASK_ATTR_SIMPLE	= 0,
-	FCP_TASK_ATTR_HOQ	= 1,
-	FCP_TASK_ATTR_ORDERED	= 2,
-	FCP_TASK_ATTR_ACA	= 4,
-	FCP_TASK_ATTR_UNTAGGED	= 5,	/* obsolete in FCP-3 */
+	FCP_IODIR_READ  = 2,
+	FCP_IODIR_RW    = 3,
 };
 
 /*
@@ -1239,58 +1113,40 @@ enum fcp_tm_cmnd {
 };
 
 /*
- * FCP_XFER_RDY IU defines
- */
-struct fcp_xfer_rdy_s {
-	u32        data_ro;
-	u32        burst_len;
-	u32        reserved;
-};
-
-/*
  * FCP_RSP residue flags
  */
 enum fcp_residue {
-	FCP_NO_RESIDUE = 0,	/* no residue */
-	FCP_RESID_OVER = 1,	/* more data left that was not sent */
-	FCP_RESID_UNDER = 2,	/* less data than requested */
-};
-
-enum {
-	FCP_RSPINFO_GOOD = 0,
-	FCP_RSPINFO_DATALEN_MISMATCH = 1,
-	FCP_RSPINFO_CMND_INVALID = 2,
-	FCP_RSPINFO_ROLEN_MISMATCH = 3,
-	FCP_RSPINFO_TM_NOT_SUPP = 4,
-	FCP_RSPINFO_TM_FAILED = 5,
+	FCP_NO_RESIDUE = 0,     /* no residue */
+	FCP_RESID_OVER = 1,     /* more data left that was not sent */
+	FCP_RESID_UNDER = 2,    /* less data than requested */
 };
 
 struct fcp_rspinfo_s {
 	u32        res0:24;
-	u32        rsp_code:8;	/* response code (as above) */
+	u32        rsp_code:8;		/* response code (as above) */
 	u32        res1;
 };
 
 struct fcp_resp_s {
-	u32        reserved[2];	/* 2 words reserved */
+	u32        reserved[2];		/* 2 words reserved */
 	u16        reserved2;
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 	u8         reserved3:3;
 	u8         fcp_conf_req:1;	/* FCP_CONF is requested */
 	u8         resid_flags:2;	/* underflow/overflow */
-	u8         sns_len_valid:1;/* sense len is valid */
-	u8         rsp_len_valid:1;/* response len is valid */
+	u8         sns_len_valid:1;	/* sense len is valid */
+	u8         rsp_len_valid:1;	/* response len is valid */
 #else
-	u8         rsp_len_valid:1;/* response len is valid */
-	u8         sns_len_valid:1;/* sense len is valid */
+	u8         rsp_len_valid:1;	/* response len is valid */
+	u8         sns_len_valid:1;	/* sense len is valid */
 	u8         resid_flags:2;	/* underflow/overflow */
 	u8         fcp_conf_req:1;	/* FCP_CONF is requested */
 	u8         reserved3:3;
 #endif
-	u8         scsi_status;	/* one byte SCSI status */
-	u32        residue;	/* residual data bytes */
-	u32        sns_len;	/* length od sense info */
-	u32        rsp_len;	/* length of response info */
+	u8         scsi_status;		/* one byte SCSI status */
+	u32        residue;		/* residual data bytes */
+	u32        sns_len;		/* length od sense info */
+	u32        rsp_len;		/* length of response info */
 };
 
 #define fcp_snslen(__fcprsp)	((__fcprsp)->sns_len_valid ?		\
@@ -1300,12 +1156,6 @@ struct fcp_resp_s {
 #define fcp_rspinfo(__fcprsp)	((struct fcp_rspinfo_s *)((__fcprsp) + 1))
 #define fcp_snsinfo(__fcprsp)	(((u8 *)fcp_rspinfo(__fcprsp)) +	\
 						fcp_rsplen(__fcprsp))
-
-struct fcp_cmnd_fr_s {
-	struct fchs_s fchs;
-	struct fcp_cmnd_s fcp;
-};
-
 /*
  * CT
  */
@@ -1379,7 +1229,7 @@ enum {
 	CT_RSN_LOGICAL_BUSY	= 0x05,
 	CT_RSN_PROTO_ERR	= 0x07,
 	CT_RSN_UNABLE_TO_PERF	= 0x09,
-	CT_RSN_NOT_SUPP			= 0x0B,
+	CT_RSN_NOT_SUPP		= 0x0B,
 	CT_RSN_SERVER_NOT_AVBL  = 0x0D,
 	CT_RSN_SESSION_COULD_NOT_BE_ESTBD = 0x0E,
 	CT_RSN_VENDOR_SPECIFIC  = 0xFF,
@@ -1419,10 +1269,10 @@ enum {
  * defintions for the explanation code for all servers
  */
 enum {
-	CT_EXP_AUTH_EXCEPTION			= 0xF1,
-	CT_EXP_DB_FULL					= 0xF2,
-	CT_EXP_DB_EMPTY					= 0xF3,
-	CT_EXP_PROCESSING_REQ			= 0xF4,
+	CT_EXP_AUTH_EXCEPTION		= 0xF1,
+	CT_EXP_DB_FULL			= 0xF2,
+	CT_EXP_DB_EMPTY			= 0xF3,
+	CT_EXP_PROCESSING_REQ		= 0xF4,
 	CT_EXP_UNABLE_TO_VERIFY_CONN	= 0xF5,
 	CT_EXP_DEVICES_NOT_IN_CMN_ZONE  = 0xF6
 };
@@ -1446,7 +1296,7 @@ enum {
 	GS_RFF_ID	= 0x021F,	/* Register FC4 Feature		*/
 };
 
-struct fcgs_id_req_s{
+struct fcgs_id_req_s {
 	u32 rsvd:8;
 	u32 dap:24; /* port identifier */
 };
@@ -1460,7 +1310,7 @@ struct fcgs_gidpn_req_s {
 
 struct fcgs_gidpn_resp_s {
 	u32	rsvd:8;
-	u32	dap:24;	/* port identifier */
+	u32	dap:24;		/* port identifier */
 };
 
 /*
@@ -1469,22 +1319,21 @@ struct fcgs_gidpn_resp_s {
 struct fcgs_rftid_req_s {
 	u32	rsvd:8;
 	u32	dap:24;		/* port identifier */
-	u32	fc4_type[8];	/* fc4 types */
+	__be32	fc4_type[8];	/* fc4 types */
 };
 
 /*
  * RFF_ID : Register FC4 features.
  */
-
 #define FC_GS_FCP_FC4_FEATURE_INITIATOR  0x02
 #define FC_GS_FCP_FC4_FEATURE_TARGET	 0x01
 
 struct fcgs_rffid_req_s {
-    u32    rsvd:8;
-    u32    dap:24;		/* port identifier	*/
-    u32    rsvd1:16;
-    u32    fc4ftr_bits:8;		/* fc4 feature bits	*/
-    u32    fc4_type:8;		/* corresponding FC4 Type */
+	u32	rsvd:8;
+	u32	dap:24;		/* port identifier */
+	u32	rsvd1:16;
+	u32	fc4ftr_bits:8;	/* fc4 feature bits */
+	u32	fc4_type:8;		/* corresponding FC4 Type */
 };
 
 /*
@@ -1495,16 +1344,16 @@ struct fcgs_gidft_req_s {
 	u8	domain_id;	/* domain, 0 - all fabric */
 	u8	area_id;	/* area, 0 - whole domain */
 	u8	fc4_type;	/* FC_TYPE_FCP for SCSI devices */
-};		/* GID_FT Request */
+};
 
 /*
  * GID_FT Response
  */
 struct fcgs_gidft_resp_s {
-	u8		last:1;	/* last port identifier flag */
-	u8		reserved:7;
-	u32	pid:24;	/* port identifier */
-};		/* GID_FT Response */
+	u8	last:1;		/* last port identifier flag */
+	u8	reserved:7;
+	u32	pid:24;		/* port identifier */
+};
 
 /*
  * RSPN_ID
@@ -1512,8 +1361,8 @@ struct fcgs_gidft_resp_s {
 struct fcgs_rspnid_req_s {
 	u32	rsvd:8;
 	u32	dap:24;		/* port identifier */
-	u8		spn_len;	/* symbolic port name length */
-	u8		spn[256];	/* symbolic port name */
+	u8	spn_len;	/* symbolic port name length */
+	u8	spn[256];	/* symbolic port name */
 };
 
 /*
@@ -1522,7 +1371,7 @@ struct fcgs_rspnid_req_s {
 struct fcgs_rpnid_req_s {
 	u32	rsvd:8;
 	u32	port_id:24;
-	wwn_t		port_name;
+	wwn_t	port_name;
 };
 
 /*
@@ -1531,7 +1380,7 @@ struct fcgs_rpnid_req_s {
 struct fcgs_rnnid_req_s {
 	u32	rsvd:8;
 	u32	port_id:24;
-	wwn_t		node_name;
+	wwn_t	node_name;
 };
 
 /*
@@ -1565,8 +1414,8 @@ struct fcgs_ganxt_req_s {
  * GA_NXT Response
  */
 struct fcgs_ganxt_rsp_s {
-	u32	port_type:8;	/* Port Type */
-	u32	port_id:24;	/* Port Identifier */
+	u32		port_type:8;	/* Port Type */
+	u32		port_id:24;	/* Port Identifier */
 	wwn_t		port_name;	/* Port Name */
 	u8		spn_len;	/* Length of Symbolic Port Name */
 	char		spn[255];	/* Symbolic Port Name */
@@ -1575,19 +1424,14 @@ struct fcgs_ganxt_rsp_s {
 	char		snn[255];	/* Symbolic Node Name */
 	u8		ipa[8];		/* Initial Process Associator */
 	u8		ip[16];		/* IP Address */
-	u32	cos;		/* Class of Service */
-	u32	fc4types[8];	/* FC-4 TYPEs */
-	wwn_t		fabric_port_name;
-					/* Fabric Port Name */
-	u32	rsvd:8;		/* Reserved */
-	u32	hard_addr:24;	/* Hard Address */
+	u32		cos;		/* Class of Service */
+	u32		fc4types[8];	/* FC-4 TYPEs */
+	wwn_t		fabric_port_name; /* Fabric Port Name */
+	u32		rsvd:8;		/* Reserved */
+	u32		hard_addr:24;	/* Hard Address */
 };
 
 /*
- * Fabric Config Server
- */
-
-/*
  * Command codes for Fabric Configuration Server
  */
 enum {
@@ -1598,159 +1442,9 @@ enum {
 };
 
 /*
- * Source or Destination Port Tags.
- */
-enum {
-	GS_FTRACE_TAG_NPORT_ID		= 1,
-	GS_FTRACE_TAG_NPORT_NAME	= 2,
-};
-
-/*
-* Port Value : Could be a Port id or wwn
- */
-union fcgs_port_val_u {
-	u32	nport_id;
-	wwn_t		nport_wwn;
-};
-
-#define GS_FTRACE_MAX_HOP_COUNT	20
-#define GS_FTRACE_REVISION	1
-
-/*
- * Ftrace Related Structures.
- */
-
-/*
- * STR (Switch Trace) Reject Reason Codes. From FC-SW.
- */
-enum {
-	GS_FTRACE_STR_CMD_COMPLETED_SUCC	= 0,
-	GS_FTRACE_STR_CMD_NOT_SUPP_IN_NEXT_SWITCH,
-	GS_FTRACE_STR_NO_RESP_FROM_NEXT_SWITCH,
-	GS_FTRACE_STR_MAX_HOP_CNT_REACHED,
-	GS_FTRACE_STR_SRC_PORT_NOT_FOUND,
-	GS_FTRACE_STR_DST_PORT_NOT_FOUND,
-	GS_FTRACE_STR_DEVICES_NOT_IN_COMMON_ZONE,
-	GS_FTRACE_STR_NO_ROUTE_BW_PORTS,
-	GS_FTRACE_STR_NO_ADDL_EXPLN,
-	GS_FTRACE_STR_FABRIC_BUSY,
-	GS_FTRACE_STR_FABRIC_BUILD_IN_PROGRESS,
-	GS_FTRACE_STR_VENDOR_SPECIFIC_ERR_START = 0xf0,
-	GS_FTRACE_STR_VENDOR_SPECIFIC_ERR_END = 0xff,
-};
-
-/*
- * Ftrace Request
- */
-struct fcgs_ftrace_req_s {
-	u32	revision;
-	u16	src_port_tag;	/* Source Port tag */
-	u16	src_port_len;	/* Source Port len */
-	union fcgs_port_val_u src_port_val;	/* Source Port value */
-	u16	dst_port_tag;	/* Destination Port tag */
-	u16	dst_port_len;	/* Destination Port len */
-	union fcgs_port_val_u dst_port_val;	/* Destination Port value */
-	u32	token;
-	u8		vendor_id[8];	/* T10 Vendor Identifier */
-	u8		vendor_info[8];	/* Vendor specific Info */
-	u32	max_hop_cnt;	/* Max Hop Count */
-};
-
-/*
- * Path info structure
- */
-struct fcgs_ftrace_path_info_s {
-	wwn_t		switch_name;		/* Switch WWN */
-	u32	domain_id;
-	wwn_t		ingress_port_name;	/* Ingress ports wwn */
-	u32	ingress_phys_port_num;	/* Ingress ports physical port
-						 * number
-						 */
-	wwn_t		egress_port_name;	/* Ingress ports wwn */
-	u32	egress_phys_port_num;	/* Ingress ports physical port
-						 * number
-						 */
-};
-
-/*
- * Ftrace Acc Response
- */
-struct fcgs_ftrace_resp_s {
-	u32	revision;
-	u32	token;
-	u8		vendor_id[8];		/* T10 Vendor Identifier */
-	u8		vendor_info[8];		/* Vendor specific Info */
-	u32	str_rej_reason_code;	/* STR Reject Reason Code */
-	u32	num_path_info_entries;	/* No. of path info entries */
-	/*
-	 * path info entry/entries.
-	 */
-	struct fcgs_ftrace_path_info_s path_info[1];
-
-};
-
-/*
-* Fabric Config Server : FCPing
- */
-
-/*
- * FC Ping Request
- */
-struct fcgs_fcping_req_s {
-	u32	revision;
-	u16	port_tag;
-	u16	port_len;	/* Port len */
-	union fcgs_port_val_u port_val;	/* Port value */
-	u32	token;
-};
-
-/*
- * FC Ping Response
- */
-struct fcgs_fcping_resp_s {
-	u32	token;
-};
-
-/*
- * Command codes for zone server query.
- */
-enum {
-	ZS_GZME = 0x0124,	/* Get zone member extended */
-};
-
-/*
- * ZS GZME request
- */
-#define ZS_GZME_ZNAMELEN	32
-struct zs_gzme_req_s {
-	u8	znamelen;
-	u8	rsvd[3];
-	u8	zname[ZS_GZME_ZNAMELEN];
-};
-
-enum zs_mbr_type {
-	ZS_MBR_TYPE_PWWN	= 1,
-	ZS_MBR_TYPE_DOMPORT	= 2,
-	ZS_MBR_TYPE_PORTID	= 3,
-	ZS_MBR_TYPE_NWWN	= 4,
-};
-
-struct zs_mbr_wwn_s {
-	u8	mbr_type;
-	u8	rsvd[3];
-	wwn_t	wwn;
-};
-
-struct zs_query_resp_s {
-	u32	nmbrs;	/*  number of zone members */
-	struct zs_mbr_wwn_s	mbr[1];
-};
-
-/*
  * GMAL Command ( Get ( interconnect Element) Management Address List)
  * To retrieve the IP Address of a Switch.
  */
-
 #define CT_GMAL_RESP_PREFIX_TELNET	 "telnet://"
 #define CT_GMAL_RESP_PREFIX_HTTP	 "http://"
 
@@ -1764,7 +1458,7 @@ struct fcgs_req_s {
 
 /* Accept Response to GMAL */
 struct fcgs_gmal_resp_s {
-	u32	ms_len;   /* Num of entries */
+	__be32	ms_len;   /* Num of entries */
 	u8	ms_ma[256];
 };
 
@@ -1775,9 +1469,6 @@ struct fcgs_gmal_entry_s {
 };
 
 /*
- * FDMI
- */
-/*
  * FDMI Command Codes
  */
 #define	FDMI_GRHL		0x0100
@@ -1856,8 +1547,8 @@ enum fdmi_port_attribute_type {
  * FDMI attribute
  */
 struct fdmi_attr_s {
-	u16        type;
-	u16        len;
+	__be16        type;
+	__be16        len;
 	u8         value[1];
 };
 
@@ -1865,7 +1556,7 @@ struct fdmi_attr_s {
  * HBA Attribute Block
  */
 struct fdmi_hba_attr_s {
-	u32        attr_count;	/* # of attributes */
+	__be32        attr_count;	/* # of attributes */
 	struct fdmi_attr_s hba_attr;	/* n attributes */
 };
 
@@ -1873,15 +1564,15 @@ struct fdmi_hba_attr_s {
  * Registered Port List
  */
 struct fdmi_port_list_s {
-	u32        num_ports;	/* number Of Port Entries */
-	wwn_t           port_entry;	/* one or more */
+	__be32		num_ports;	/* number Of Port Entries */
+	wwn_t		port_entry;	/* one or more */
 };
 
 /*
  * Port Attribute Block
  */
 struct fdmi_port_attr_s {
-	u32        attr_count;	/* # of attributes */
+	__be32        attr_count;	/* # of attributes */
 	struct fdmi_attr_s port_attr;	/* n attributes */
 };
 
@@ -1889,7 +1580,7 @@ struct fdmi_port_attr_s {
  * FDMI Register HBA Attributes
  */
 struct fdmi_rhba_s {
-	wwn_t           hba_id;		/* HBA Identifier */
+	wwn_t			hba_id;		/* HBA Identifier */
 	struct fdmi_port_list_s port_list;	/* Registered Port List */
 	struct fdmi_hba_attr_s hba_attr_blk;	/* HBA attribute block */
 };
@@ -1898,8 +1589,8 @@ struct fdmi_rhba_s {
  * FDMI Register Port
  */
 struct fdmi_rprt_s {
-	wwn_t           hba_id;		/* HBA Identifier */
-	wwn_t           port_name;	/* Port wwn */
+	wwn_t			hba_id;		/* HBA Identifier */
+	wwn_t			port_name;	/* Port wwn */
 	struct fdmi_port_attr_s port_attr_blk;	/* Port Attr Block */
 };
 
@@ -1907,7 +1598,7 @@ struct fdmi_rprt_s {
  * FDMI Register Port Attributes
  */
 struct fdmi_rpa_s {
-	wwn_t           port_name;	/* port wwn */
+	wwn_t			port_name;	/* port wwn */
 	struct fdmi_port_attr_s port_attr_blk;	/* Port Attr Block */
 };
 
diff --git a/drivers/scsi/bfa/bfa_fcbuild.c b/drivers/scsi/bfa/bfa_fcbuild.c
index 9c725314b51..b7e25345165 100644
--- a/drivers/scsi/bfa/bfa_fcbuild.c
+++ b/drivers/scsi/bfa/bfa_fcbuild.c
@@ -18,16 +18,16 @@
  * fcbuild.c - FC link service frame building and parsing routines
  */
 
-#include "bfa_os_inc.h"
+#include "bfad_drv.h"
 #include "bfa_fcbuild.h"
 
 /*
  * static build functions
  */
 static void     fc_els_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
-				 u16 ox_id);
+				 __be16 ox_id);
 static void     fc_bls_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
-				 u16 ox_id);
+				 __be16 ox_id);
 static struct fchs_s fc_els_req_tmpl;
 static struct fchs_s fc_els_rsp_tmpl;
 static struct fchs_s fc_bls_req_tmpl;
@@ -48,7 +48,7 @@ fcbuild_init(void)
 	fc_els_req_tmpl.cat_info = FC_CAT_LD_REQUEST;
 	fc_els_req_tmpl.type = FC_TYPE_ELS;
 	fc_els_req_tmpl.f_ctl =
-		bfa_os_hton3b(FCTL_SEQ_INI | FCTL_FS_EXCH | FCTL_END_SEQ |
+		bfa_hton3b(FCTL_SEQ_INI | FCTL_FS_EXCH | FCTL_END_SEQ |
 			      FCTL_SI_XFER);
 	fc_els_req_tmpl.rx_id = FC_RXID_ANY;
 
@@ -59,7 +59,7 @@ fcbuild_init(void)
 	fc_els_rsp_tmpl.cat_info = FC_CAT_LD_REPLY;
 	fc_els_rsp_tmpl.type = FC_TYPE_ELS;
 	fc_els_rsp_tmpl.f_ctl =
-		bfa_os_hton3b(FCTL_EC_RESP | FCTL_SEQ_INI | FCTL_LS_EXCH |
+		bfa_hton3b(FCTL_EC_RESP | FCTL_SEQ_INI | FCTL_LS_EXCH |
 			      FCTL_END_SEQ | FCTL_SI_XFER);
 	fc_els_rsp_tmpl.rx_id = FC_RXID_ANY;
 
@@ -68,7 +68,7 @@ fcbuild_init(void)
 	 */
 	fc_bls_req_tmpl.routing = FC_RTG_BASIC_LINK;
 	fc_bls_req_tmpl.type = FC_TYPE_BLS;
-	fc_bls_req_tmpl.f_ctl = bfa_os_hton3b(FCTL_END_SEQ | FCTL_SI_XFER);
+	fc_bls_req_tmpl.f_ctl = bfa_hton3b(FCTL_END_SEQ | FCTL_SI_XFER);
 	fc_bls_req_tmpl.rx_id = FC_RXID_ANY;
 
 	/*
@@ -78,7 +78,7 @@ fcbuild_init(void)
 	fc_bls_rsp_tmpl.cat_info = FC_CAT_BA_ACC;
 	fc_bls_rsp_tmpl.type = FC_TYPE_BLS;
 	fc_bls_rsp_tmpl.f_ctl =
-		bfa_os_hton3b(FCTL_EC_RESP | FCTL_SEQ_INI | FCTL_LS_EXCH |
+		bfa_hton3b(FCTL_EC_RESP | FCTL_SEQ_INI | FCTL_LS_EXCH |
 			      FCTL_END_SEQ | FCTL_SI_XFER);
 	fc_bls_rsp_tmpl.rx_id = FC_RXID_ANY;
 
@@ -129,7 +129,7 @@ fcbuild_init(void)
 	fcp_fchs_tmpl.cat_info = FC_CAT_UNSOLICIT_CMD;
 	fcp_fchs_tmpl.type = FC_TYPE_FCP;
 	fcp_fchs_tmpl.f_ctl =
-		bfa_os_hton3b(FCTL_FS_EXCH | FCTL_END_SEQ | FCTL_SI_XFER);
+		bfa_hton3b(FCTL_FS_EXCH | FCTL_END_SEQ | FCTL_SI_XFER);
 	fcp_fchs_tmpl.seq_id = 1;
 	fcp_fchs_tmpl.rx_id = FC_RXID_ANY;
 }
@@ -143,7 +143,7 @@ fc_gs_fchdr_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u32 ox_id)
 	fchs->cat_info = FC_CAT_UNSOLICIT_CTRL;
 	fchs->type = FC_TYPE_SERVICES;
 	fchs->f_ctl =
-		bfa_os_hton3b(FCTL_SEQ_INI | FCTL_FS_EXCH | FCTL_END_SEQ |
+		bfa_hton3b(FCTL_SEQ_INI | FCTL_FS_EXCH | FCTL_END_SEQ |
 			      FCTL_SI_XFER);
 	fchs->rx_id = FC_RXID_ANY;
 	fchs->d_id = (d_id);
@@ -157,7 +157,7 @@ fc_gs_fchdr_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u32 ox_id)
 }
 
 void
-fc_els_req_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u16 ox_id)
+fc_els_req_build(struct fchs_s *fchs, u32 d_id, u32 s_id, __be16 ox_id)
 {
 	memcpy(fchs, &fc_els_req_tmpl, sizeof(struct fchs_s));
 	fchs->d_id = (d_id);
@@ -166,7 +166,7 @@ fc_els_req_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u16 ox_id)
 }
 
 static void
-fc_els_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u16 ox_id)
+fc_els_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id, __be16 ox_id)
 {
 	memcpy(fchs, &fc_els_rsp_tmpl, sizeof(struct fchs_s));
 	fchs->d_id = d_id;
@@ -196,7 +196,7 @@ fc_els_rsp_parse(struct fchs_s *fchs, int len)
 }
 
 static void
-fc_bls_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u16 ox_id)
+fc_bls_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id, __be16 ox_id)
 {
 	memcpy(fchs, &fc_bls_rsp_tmpl, sizeof(struct fchs_s));
 	fchs->d_id = d_id;
@@ -206,7 +206,7 @@ fc_bls_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u16 ox_id)
 
 static          u16
 fc_plogi_x_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
-		 u16 ox_id, wwn_t port_name, wwn_t node_name,
+		 __be16 ox_id, wwn_t port_name, wwn_t node_name,
 		 u16 pdu_size, u8 els_code)
 {
 	struct fc_logi_s *plogi = (struct fc_logi_s *) (pld);
@@ -232,8 +232,8 @@ fc_flogi_build(struct fchs_s *fchs, struct fc_logi_s *flogi, u32 s_id,
 		u16 ox_id, wwn_t port_name, wwn_t node_name, u16 pdu_size,
 	       u8 set_npiv, u8 set_auth, u16 local_bb_credits)
 {
-	u32        d_id = bfa_os_hton3b(FC_FABRIC_PORT);
-	u32	*vvl_info;
+	u32        d_id = bfa_hton3b(FC_FABRIC_PORT);
+	__be32	*vvl_info;
 
 	memcpy(flogi, &plogi_tmpl, sizeof(struct fc_logi_s));
 
@@ -267,7 +267,7 @@ fc_flogi_build(struct fchs_s *fchs, struct fc_logi_s *flogi, u32 s_id,
 
 u16
 fc_flogi_acc_build(struct fchs_s *fchs, struct fc_logi_s *flogi, u32 s_id,
-		   u16 ox_id, wwn_t port_name, wwn_t node_name,
+		   __be16 ox_id, wwn_t port_name, wwn_t node_name,
 		   u16 pdu_size, u16 local_bb_credits)
 {
 	u32        d_id = 0;
@@ -289,7 +289,7 @@ u16
 fc_fdisc_build(struct fchs_s *fchs, struct fc_logi_s *flogi, u32 s_id,
 		u16 ox_id, wwn_t port_name, wwn_t node_name, u16 pdu_size)
 {
-	u32        d_id = bfa_os_hton3b(FC_FABRIC_PORT);
+	u32        d_id = bfa_hton3b(FC_FABRIC_PORT);
 
 	memcpy(flogi, &plogi_tmpl, sizeof(struct fc_logi_s));
 
@@ -392,7 +392,7 @@ fc_prli_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
 
 u16
 fc_prli_acc_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
-		  u16 ox_id, enum bfa_lport_role role)
+		  __be16 ox_id, enum bfa_lport_role role)
 {
 	struct fc_prli_s *prli = (struct fc_prli_s *) (pld);
 
@@ -456,9 +456,9 @@ fc_logo_build(struct fchs_s *fchs, struct fc_logo_s *logo, u32 d_id, u32 s_id,
 	return sizeof(struct fc_logo_s);
 }
 
-static          u16
+static u16
 fc_adisc_x_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
-		 u32 s_id, u16 ox_id, wwn_t port_name,
+		 u32 s_id, __be16 ox_id, wwn_t port_name,
 		 wwn_t node_name, u8 els_code)
 {
 	memset(adisc, '\0', sizeof(struct fc_adisc_s));
@@ -480,7 +480,7 @@ fc_adisc_x_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
 
 u16
 fc_adisc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
-		u32 s_id, u16 ox_id, wwn_t port_name, wwn_t node_name)
+		u32 s_id, __be16 ox_id, wwn_t port_name, wwn_t node_name)
 {
 	return fc_adisc_x_build(fchs, adisc, d_id, s_id, ox_id, port_name,
 				node_name, FC_ELS_ADISC);
@@ -488,7 +488,7 @@ fc_adisc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
 
 u16
 fc_adisc_acc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
-		   u32 s_id, u16 ox_id, wwn_t port_name,
+		   u32 s_id, __be16 ox_id, wwn_t port_name,
 		   wwn_t node_name)
 {
 	return fc_adisc_x_build(fchs, adisc, d_id, s_id, ox_id, port_name,
@@ -592,7 +592,7 @@ fc_rrq_build(struct fchs_s *fchs, struct fc_rrq_s *rrq, u32 d_id, u32 s_id,
 
 u16
 fc_logo_acc_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
-		  u16 ox_id)
+		  __be16 ox_id)
 {
 	struct fc_els_cmd_s *acc = pld;
 
@@ -606,7 +606,7 @@ fc_logo_acc_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
 
 u16
 fc_ls_rjt_build(struct fchs_s *fchs, struct fc_ls_rjt_s *ls_rjt, u32 d_id,
-		u32 s_id, u16 ox_id, u8 reason_code,
+		u32 s_id, __be16 ox_id, u8 reason_code,
 		u8 reason_code_expl)
 {
 	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
@@ -622,7 +622,7 @@ fc_ls_rjt_build(struct fchs_s *fchs, struct fc_ls_rjt_s *ls_rjt, u32 d_id,
 
 u16
 fc_ba_acc_build(struct fchs_s *fchs, struct fc_ba_acc_s *ba_acc, u32 d_id,
-		u32 s_id, u16 ox_id, u16 rx_id)
+		u32 s_id, __be16 ox_id, u16 rx_id)
 {
 	fc_bls_rsp_build(fchs, d_id, s_id, ox_id);
 
@@ -638,7 +638,7 @@ fc_ba_acc_build(struct fchs_s *fchs, struct fc_ba_acc_s *ba_acc, u32 d_id,
 
 u16
 fc_ls_acc_build(struct fchs_s *fchs, struct fc_els_cmd_s *els_cmd, u32 d_id,
-		u32 s_id, u16 ox_id)
+		u32 s_id, __be16 ox_id)
 {
 	fc_els_rsp_build(fchs, d_id, s_id, ox_id);
 	memset(els_cmd, 0, sizeof(struct fc_els_cmd_s));
@@ -666,7 +666,7 @@ fc_logout_params_pages(struct fchs_s *fc_frame, u8 els_code)
 
 u16
 fc_tprlo_acc_build(struct fchs_s *fchs, struct fc_tprlo_acc_s *tprlo_acc,
-		u32 d_id, u32 s_id, u16 ox_id, int num_pages)
+		u32 d_id, u32 s_id, __be16 ox_id, int num_pages)
 {
 	int             page;
 
@@ -690,7 +690,7 @@ fc_tprlo_acc_build(struct fchs_s *fchs, struct fc_tprlo_acc_s *tprlo_acc,
 
 u16
 fc_prlo_acc_build(struct fchs_s *fchs, struct fc_prlo_acc_s *prlo_acc, u32 d_id,
-		  u32 s_id, u16 ox_id, int num_pages)
+		  u32 s_id, __be16 ox_id, int num_pages)
 {
 	int             page;
 
@@ -728,7 +728,7 @@ fc_rnid_build(struct fchs_s *fchs, struct fc_rnid_cmd_s *rnid, u32 d_id,
 
 u16
 fc_rnid_acc_build(struct fchs_s *fchs, struct fc_rnid_acc_s *rnid_acc, u32 d_id,
-		  u32 s_id, u16 ox_id, u32 data_format,
+		  u32 s_id, __be16 ox_id, u32 data_format,
 		  struct fc_rnid_common_id_data_s *common_id_data,
 		  struct fc_rnid_general_topology_data_s *gen_topo_data)
 {
@@ -770,10 +770,10 @@ u16
 fc_rpsc2_build(struct fchs_s *fchs, struct fc_rpsc2_cmd_s *rpsc2, u32 d_id,
 		u32 s_id, u32 *pid_list, u16 npids)
 {
-	u32 dctlr_id = FC_DOMAIN_CTRLR(bfa_os_hton3b(d_id));
+	u32 dctlr_id = FC_DOMAIN_CTRLR(bfa_hton3b(d_id));
 	int i = 0;
 
-	fc_els_req_build(fchs, bfa_os_hton3b(dctlr_id), s_id, 0);
+	fc_els_req_build(fchs, bfa_hton3b(dctlr_id), s_id, 0);
 
 	memset(rpsc2, 0, sizeof(struct fc_rpsc2_cmd_s));
 
@@ -788,7 +788,7 @@ fc_rpsc2_build(struct fchs_s *fchs, struct fc_rpsc2_cmd_s *rpsc2, u32 d_id,
 
 u16
 fc_rpsc_acc_build(struct fchs_s *fchs, struct fc_rpsc_acc_s *rpsc_acc,
-		u32 d_id, u32 s_id, u16 ox_id,
+		u32 d_id, u32 s_id, __be16 ox_id,
 		  struct fc_rpsc_speed_info_s *oper_speed)
 {
 	memset(rpsc_acc, 0, sizeof(struct fc_rpsc_acc_s));
@@ -807,11 +807,6 @@ fc_rpsc_acc_build(struct fchs_s *fchs, struct fc_rpsc_acc_s *rpsc_acc,
 	return sizeof(struct fc_rpsc_acc_s);
 }
 
-/*
- * TBD -
- * . get rid of unnecessary memsets
- */
-
 u16
 fc_logo_rsp_parse(struct fchs_s *fchs, int len)
 {
@@ -995,7 +990,7 @@ fc_rrq_rsp_parse(struct fchs_s *fchs, int len)
 }
 
 u16
-fc_ba_rjt_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u16 ox_id,
+fc_ba_rjt_build(struct fchs_s *fchs, u32 d_id, u32 s_id, __be16 ox_id,
 		u32 reason_code, u32 reason_expl)
 {
 	struct fc_ba_rjt_s *ba_rjt = (struct fc_ba_rjt_s *) (fchs + 1);
@@ -1045,7 +1040,7 @@ fc_gidpn_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_gidpn_req_s *gidpn = (struct fcgs_gidpn_req_s *)(cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
 	fc_gs_cthdr_build(cthdr, s_id, GS_GID_PN);
@@ -1061,7 +1056,7 @@ fc_gpnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	fcgs_gpnid_req_t *gpnid = (fcgs_gpnid_req_t *) (cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
 	fc_gs_cthdr_build(cthdr, s_id, GS_GPN_ID);
@@ -1077,7 +1072,7 @@ fc_gnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	fcgs_gnnid_req_t *gnnid = (fcgs_gnnid_req_t *) (cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
 	fc_gs_cthdr_build(cthdr, s_id, GS_GNN_ID);
@@ -1104,7 +1099,7 @@ u16
 fc_scr_build(struct fchs_s *fchs, struct fc_scr_s *scr,
 		u8 set_br_reg, u32 s_id, u16 ox_id)
 {
-	u32        d_id = bfa_os_hton3b(FC_FABRIC_CONTROLLER);
+	u32        d_id = bfa_hton3b(FC_FABRIC_CONTROLLER);
 
 	fc_els_req_build(fchs, d_id, s_id, ox_id);
 
@@ -1121,7 +1116,7 @@ u16
 fc_rscn_build(struct fchs_s *fchs, struct fc_rscn_pl_s *rscn,
 		u32 s_id, u16 ox_id)
 {
-	u32        d_id = bfa_os_hton3b(FC_FABRIC_CONTROLLER);
+	u32        d_id = bfa_hton3b(FC_FABRIC_CONTROLLER);
 	u16        payldlen;
 
 	fc_els_req_build(fchs, d_id, s_id, ox_id);
@@ -1143,7 +1138,7 @@ fc_rftid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_rftid_req_s *rftid = (struct fcgs_rftid_req_s *)(cthdr + 1);
-	u32        type_value, d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        type_value, d_id = bfa_hton3b(FC_NAME_SERVER);
 	u8         index;
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
@@ -1167,7 +1162,7 @@ fc_rftid_build_sol(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_rftid_req_s *rftid = (struct fcgs_rftid_req_s *)(cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
 	fc_gs_cthdr_build(cthdr, s_id, GS_RFT_ID);
@@ -1187,7 +1182,7 @@ fc_rffid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_rffid_req_s *rffid = (struct fcgs_rffid_req_s *)(cthdr + 1);
-	u32         d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32         d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
 	fc_gs_cthdr_build(cthdr, s_id, GS_RFF_ID);
@@ -1209,7 +1204,7 @@ fc_rspnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_rspnid_req_s *rspnid =
 			(struct fcgs_rspnid_req_s *)(cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
 	fc_gs_cthdr_build(cthdr, s_id, GS_RSPN_ID);
@@ -1229,7 +1224,7 @@ fc_gid_ft_build(struct fchs_s *fchs, void *pyld, u32 s_id, u8 fc4_type)
 
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_gidft_req_s *gidft = (struct fcgs_gidft_req_s *)(cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
 
@@ -1249,7 +1244,7 @@ fc_rpnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_rpnid_req_s *rpnid = (struct fcgs_rpnid_req_s *)(cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
 	fc_gs_cthdr_build(cthdr, s_id, GS_RPN_ID);
@@ -1267,7 +1262,7 @@ fc_rnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_rnnid_req_s *rnnid = (struct fcgs_rnnid_req_s *)(cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
 	fc_gs_cthdr_build(cthdr, s_id, GS_RNN_ID);
@@ -1286,7 +1281,7 @@ fc_rcsid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_rcsid_req_s *rcsid =
 			(struct fcgs_rcsid_req_s *) (cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
 	fc_gs_cthdr_build(cthdr, s_id, GS_RCS_ID);
@@ -1304,7 +1299,7 @@ fc_rptid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_rptid_req_s *rptid = (struct fcgs_rptid_req_s *)(cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
 	fc_gs_cthdr_build(cthdr, s_id, GS_RPT_ID);
@@ -1321,7 +1316,7 @@ fc_ganxt_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id)
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	struct fcgs_ganxt_req_s *ganxt = (struct fcgs_ganxt_req_s *)(cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_NAME_SERVER);
+	u32        d_id = bfa_hton3b(FC_NAME_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
 	fc_gs_cthdr_build(cthdr, s_id, GS_GA_NXT);
@@ -1341,7 +1336,7 @@ fc_fdmi_reqhdr_build(struct fchs_s *fchs, void *pyld, u32 s_id,
 {
 
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
-	u32        d_id = bfa_os_hton3b(FC_MGMT_SERVER);
+	u32        d_id = bfa_hton3b(FC_MGMT_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
 	fc_gs_fdmi_cthdr_build(cthdr, s_id, cmd_code);
@@ -1356,7 +1351,7 @@ void
 fc_get_fc4type_bitmask(u8 fc4_type, u8 *bit_mask)
 {
 	u8         index;
-	u32       *ptr = (u32 *) bit_mask;
+	__be32       *ptr = (__be32 *) bit_mask;
 	u32        type_value;
 
 	/*
@@ -1377,7 +1372,7 @@ fc_gmal_req_build(struct fchs_s *fchs, void *pyld, u32 s_id, wwn_t wwn)
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	fcgs_gmal_req_t *gmal = (fcgs_gmal_req_t *) (cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_MGMT_SERVER);
+	u32        d_id = bfa_hton3b(FC_MGMT_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
 	fc_gs_ms_cthdr_build(cthdr, s_id, GS_FC_GMAL_CMD,
@@ -1397,7 +1392,7 @@ fc_gfn_req_build(struct fchs_s *fchs, void *pyld, u32 s_id, wwn_t wwn)
 {
 	struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
 	fcgs_gfn_req_t *gfn = (fcgs_gfn_req_t *) (cthdr + 1);
-	u32        d_id = bfa_os_hton3b(FC_MGMT_SERVER);
+	u32        d_id = bfa_hton3b(FC_MGMT_SERVER);
 
 	fc_gs_fchdr_build(fchs, d_id, s_id, 0);
 	fc_gs_ms_cthdr_build(cthdr, s_id, GS_FC_GFN_CMD,
diff --git a/drivers/scsi/bfa/bfa_fcbuild.h b/drivers/scsi/bfa/bfa_fcbuild.h
index 73abd02e53c..ece51ec7620 100644
--- a/drivers/scsi/bfa/bfa_fcbuild.h
+++ b/drivers/scsi/bfa/bfa_fcbuild.h
@@ -21,7 +21,7 @@
 #ifndef __FCBUILD_H__
 #define __FCBUILD_H__
 
-#include "bfa_os_inc.h"
+#include "bfad_drv.h"
 #include "bfa_fc.h"
 #include "bfa_defs_fcs.h"
 
@@ -138,7 +138,7 @@ u16        fc_fdisc_build(struct fchs_s *buf, struct fc_logi_s *flogi, u32 s_id,
 			       u16 pdu_size);
 
 u16        fc_flogi_acc_build(struct fchs_s *fchs, struct fc_logi_s *flogi,
-				   u32 s_id, u16 ox_id,
+				   u32 s_id, __be16 ox_id,
 				   wwn_t port_name, wwn_t node_name,
 				   u16 pdu_size,
 				   u16 local_bb_credits);
@@ -186,7 +186,7 @@ u16        fc_plogi_acc_build(struct fchs_s *fchs, void *pld, u32 d_id,
 				   u16 pdu_size);
 
 u16        fc_adisc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc,
-			u32 d_id, u32 s_id, u16 ox_id, wwn_t port_name,
+			u32 d_id, u32 s_id, __be16 ox_id, wwn_t port_name,
 			       wwn_t node_name);
 
 enum fc_parse_status fc_adisc_parse(struct fchs_s *fchs, void *pld,
@@ -196,20 +196,20 @@ enum fc_parse_status fc_adisc_rsp_parse(struct fc_adisc_s *adisc, int len,
 				 wwn_t port_name, wwn_t node_name);
 
 u16        fc_adisc_acc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc,
-				   u32 d_id, u32 s_id, u16 ox_id,
+				   u32 d_id, u32 s_id, __be16 ox_id,
 				   wwn_t port_name, wwn_t node_name);
 u16        fc_ls_rjt_build(struct fchs_s *fchs, struct fc_ls_rjt_s *ls_rjt,
-				u32 d_id, u32 s_id, u16 ox_id,
+				u32 d_id, u32 s_id, __be16 ox_id,
 				u8 reason_code, u8 reason_code_expl);
 u16        fc_ls_acc_build(struct fchs_s *fchs, struct fc_els_cmd_s *els_cmd,
-				u32 d_id, u32 s_id, u16 ox_id);
+				u32 d_id, u32 s_id, __be16 ox_id);
 u16        fc_prli_build(struct fchs_s *fchs, void *pld, u32 d_id,
 			      u32 s_id, u16 ox_id);
 
 enum fc_parse_status fc_prli_rsp_parse(struct fc_prli_s *prli, int len);
 
 u16        fc_prli_acc_build(struct fchs_s *fchs, void *pld, u32 d_id,
-				  u32 s_id, u16 ox_id,
+				  u32 s_id, __be16 ox_id,
 				  enum bfa_lport_role role);
 
 u16        fc_rnid_build(struct fchs_s *fchs, struct fc_rnid_cmd_s *rnid,
@@ -218,7 +218,7 @@ u16        fc_rnid_build(struct fchs_s *fchs, struct fc_rnid_cmd_s *rnid,
 
 u16        fc_rnid_acc_build(struct fchs_s *fchs,
 			struct fc_rnid_acc_s *rnid_acc, u32 d_id, u32 s_id,
-			u16 ox_id, u32 data_format,
+			__be16 ox_id, u32 data_format,
 			struct fc_rnid_common_id_data_s *common_id_data,
 			struct fc_rnid_general_topology_data_s *gen_topo_data);
 
@@ -228,7 +228,7 @@ u16        fc_rpsc_build(struct fchs_s *fchs, struct fc_rpsc_cmd_s *rpsc,
 			      u32 d_id, u32 s_id, u16 ox_id);
 u16        fc_rpsc_acc_build(struct fchs_s *fchs,
 			struct fc_rpsc_acc_s *rpsc_acc, u32 d_id, u32 s_id,
-			u16 ox_id, struct fc_rpsc_speed_info_s *oper_speed);
+			__be16 ox_id, struct fc_rpsc_speed_info_s *oper_speed);
 u16        fc_gid_ft_build(struct fchs_s *fchs, void *pld, u32 s_id,
 				u8 fc4_type);
 
@@ -251,7 +251,7 @@ u16        fc_logo_build(struct fchs_s *fchs, struct fc_logo_s *logo, u32 d_id,
 			      u32 s_id, u16 ox_id, wwn_t port_name);
 
 u16        fc_logo_acc_build(struct fchs_s *fchs, void *pld, u32 d_id,
-				  u32 s_id, u16 ox_id);
+				  u32 s_id, __be16 ox_id);
 
 u16        fc_fdmi_reqhdr_build(struct fchs_s *fchs, void *pyld, u32 s_id,
 				     u16 cmd_code);
@@ -261,7 +261,7 @@ u16	fc_gfn_req_build(struct fchs_s *fchs, void *pyld, u32 s_id, wwn_t wwn);
 void		fc_get_fc4type_bitmask(u8 fc4_type, u8 *bit_mask);
 
 void		fc_els_req_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
-					 u16 ox_id);
+					 __be16 ox_id);
 
 enum fc_parse_status	fc_els_rsp_parse(struct fchs_s *fchs, int len);
 
@@ -274,15 +274,15 @@ enum fc_parse_status	fc_pdisc_parse(struct fchs_s *fchs, wwn_t node_name,
 					wwn_t port_name);
 
 u16 fc_ba_acc_build(struct fchs_s *fchs, struct fc_ba_acc_s *ba_acc, u32 d_id,
-		u32 s_id, u16 ox_id, u16 rx_id);
+		u32 s_id, __be16 ox_id, u16 rx_id);
 
 int fc_logout_params_pages(struct fchs_s *fc_frame, u8 els_code);
 
 u16 fc_tprlo_acc_build(struct fchs_s *fchs, struct fc_tprlo_acc_s *tprlo_acc,
-		u32 d_id, u32 s_id, u16 ox_id, int num_pages);
+		u32 d_id, u32 s_id, __be16 ox_id, int num_pages);
 
 u16 fc_prlo_acc_build(struct fchs_s *fchs, struct fc_prlo_acc_s *prlo_acc,
-		u32 d_id, u32 s_id, u16 ox_id, int num_pages);
+		u32 d_id, u32 s_id, __be16 ox_id, int num_pages);
 
 u16 fc_logo_rsp_parse(struct fchs_s *fchs, int len);
 
@@ -304,7 +304,7 @@ u16 fc_tprlo_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
 u16 fc_tprlo_rsp_parse(struct fchs_s *fchs, int len);
 
 u16 fc_ba_rjt_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
-		u16 ox_id, u32 reason_code, u32 reason_expl);
+		__be16 ox_id, u32 reason_code, u32 reason_expl);
 
 u16 fc_gnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
 		u32 port_id);
diff --git a/drivers/scsi/bfa/bfa_fcpim.c b/drivers/scsi/bfa/bfa_fcpim.c
index 135c4427801..9c410b21db6 100644
--- a/drivers/scsi/bfa/bfa_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcpim.c
@@ -15,17 +15,12 @@
  * General Public License for more details.
  */
 
+#include "bfad_drv.h"
 #include "bfa_modules.h"
-#include "bfa_cb_ioim.h"
 
 BFA_TRC_FILE(HAL, FCPIM);
 BFA_MODULE(fcpim);
 
-
-#define bfa_fcpim_add_iostats(__l, __r, __stats)	\
-	(__l->__stats += __r->__stats)
-
-
 /*
  *  BFA ITNIM Related definitions
  */
@@ -37,12 +32,12 @@ static void bfa_itnim_update_del_itn_stats(struct bfa_itnim_s *itnim);
 #define bfa_fcpim_additn(__itnim)					\
 	list_add_tail(&(__itnim)->qe, &(__itnim)->fcpim->itnim_q)
 #define bfa_fcpim_delitn(__itnim)	do {				\
-	bfa_assert(bfa_q_is_on_q(&(__itnim)->fcpim->itnim_q, __itnim));      \
+	WARN_ON(!bfa_q_is_on_q(&(__itnim)->fcpim->itnim_q, __itnim));   \
 	bfa_itnim_update_del_itn_stats(__itnim);      \
 	list_del(&(__itnim)->qe);      \
-	bfa_assert(list_empty(&(__itnim)->io_q));      \
-	bfa_assert(list_empty(&(__itnim)->io_cleanup_q));      \
-	bfa_assert(list_empty(&(__itnim)->pending_q));      \
+	WARN_ON(!list_empty(&(__itnim)->io_q));				\
+	WARN_ON(!list_empty(&(__itnim)->io_cleanup_q));			\
+	WARN_ON(!list_empty(&(__itnim)->pending_q));			\
 } while (0)
 
 #define bfa_itnim_online_cb(__itnim) do {				\
@@ -73,10 +68,8 @@ static void bfa_itnim_update_del_itn_stats(struct bfa_itnim_s *itnim);
 } while (0)
 
 /*
- *  bfa_itnim_sm BFA itnim state machine
+ *  itnim state machine event
  */
-
-
 enum bfa_itnim_event {
 	BFA_ITNIM_SM_CREATE = 1,	/*  itnim is created */
 	BFA_ITNIM_SM_ONLINE = 2,	/*  itnim is online */
@@ -107,9 +100,6 @@ enum bfa_itnim_event {
 	if ((__fcpim)->profile_start)					\
 		(__fcpim)->profile_start(__ioim);			\
 } while (0)
-/*
- *  hal_ioim_sm
- */
 
 /*
  * IO state machine events
@@ -221,8 +211,7 @@ static void     bfa_itnim_sm_deleting_qfull(struct bfa_itnim_s *itnim,
  * forward declaration for BFA IOIM functions
  */
 static bfa_boolean_t	bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim);
-static bfa_boolean_t	bfa_ioim_sge_setup(struct bfa_ioim_s *ioim);
-static void		bfa_ioim_sgpg_setup(struct bfa_ioim_s *ioim);
+static bfa_boolean_t	bfa_ioim_sgpg_alloc(struct bfa_ioim_s *ioim);
 static bfa_boolean_t	bfa_ioim_send_abort(struct bfa_ioim_s *ioim);
 static void		bfa_ioim_notify_cleanup(struct bfa_ioim_s *ioim);
 static void __bfa_cb_ioim_good_comp(void *cbarg, bfa_boolean_t complete);
@@ -232,7 +221,6 @@ static void __bfa_cb_ioim_failed(void *cbarg, bfa_boolean_t complete);
 static void __bfa_cb_ioim_pathtov(void *cbarg, bfa_boolean_t complete);
 static bfa_boolean_t    bfa_ioim_is_abortable(struct bfa_ioim_s *ioim);
 
-
 /*
  * forward declaration of BFA IO state machine
  */
@@ -260,14 +248,13 @@ static void     bfa_ioim_sm_resfree(struct bfa_ioim_s *ioim,
 					enum bfa_ioim_event event);
 static void	bfa_ioim_sm_cmnd_retry(struct bfa_ioim_s *ioim,
 					enum bfa_ioim_event event);
-
 /*
  * forward declaration for BFA TSKIM functions
  */
 static void     __bfa_cb_tskim_done(void *cbarg, bfa_boolean_t complete);
 static void     __bfa_cb_tskim_failed(void *cbarg, bfa_boolean_t complete);
 static bfa_boolean_t bfa_tskim_match_scope(struct bfa_tskim_s *tskim,
-					lun_t lun);
+					struct scsi_lun lun);
 static void     bfa_tskim_gather_ios(struct bfa_tskim_s *tskim);
 static void     bfa_tskim_cleanp_comp(void *tskim_cbarg);
 static void     bfa_tskim_cleanup_ios(struct bfa_tskim_s *tskim);
@@ -275,7 +262,6 @@ static bfa_boolean_t bfa_tskim_send(struct bfa_tskim_s *tskim);
 static bfa_boolean_t bfa_tskim_send_abort(struct bfa_tskim_s *tskim);
 static void     bfa_tskim_iocdisable_ios(struct bfa_tskim_s *tskim);
 
-
 /*
  * forward declaration of BFA TSKIM state machine
  */
@@ -293,13 +279,12 @@ static void     bfa_tskim_sm_cleanup_qfull(struct bfa_tskim_s *tskim,
 					enum bfa_tskim_event event);
 static void     bfa_tskim_sm_hcb(struct bfa_tskim_s *tskim,
 					enum bfa_tskim_event event);
-
 /*
- *  hal_fcpim_mod BFA FCP Initiator Mode module
+ *  BFA FCP Initiator Mode module
  */
 
 /*
- *	Compute and return memory needed by FCP(im) module.
+ * Compute and return memory needed by FCP(im) module.
  */
 static void
 bfa_fcpim_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
@@ -357,10 +342,6 @@ bfa_fcpim_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 static void
 bfa_fcpim_detach(struct bfa_s *bfa)
 {
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
-
-	bfa_ioim_detach(fcpim);
-	bfa_tskim_detach(fcpim);
 }
 
 static void
@@ -387,56 +368,6 @@ bfa_fcpim_iocdisable(struct bfa_s *bfa)
 }
 
 void
-bfa_fcpim_add_stats(struct bfa_itnim_iostats_s *lstats,
-		struct bfa_itnim_iostats_s *rstats)
-{
-	bfa_fcpim_add_iostats(lstats, rstats, total_ios);
-	bfa_fcpim_add_iostats(lstats, rstats, qresumes);
-	bfa_fcpim_add_iostats(lstats, rstats, no_iotags);
-	bfa_fcpim_add_iostats(lstats, rstats, io_aborts);
-	bfa_fcpim_add_iostats(lstats, rstats, no_tskims);
-	bfa_fcpim_add_iostats(lstats, rstats, iocomp_ok);
-	bfa_fcpim_add_iostats(lstats, rstats, iocomp_underrun);
-	bfa_fcpim_add_iostats(lstats, rstats, iocomp_overrun);
-	bfa_fcpim_add_iostats(lstats, rstats, iocomp_aborted);
-	bfa_fcpim_add_iostats(lstats, rstats, iocomp_timedout);
-	bfa_fcpim_add_iostats(lstats, rstats, iocom_nexus_abort);
-	bfa_fcpim_add_iostats(lstats, rstats, iocom_proto_err);
-	bfa_fcpim_add_iostats(lstats, rstats, iocom_dif_err);
-	bfa_fcpim_add_iostats(lstats, rstats, iocom_sqer_needed);
-	bfa_fcpim_add_iostats(lstats, rstats, iocom_res_free);
-	bfa_fcpim_add_iostats(lstats, rstats, iocom_hostabrts);
-	bfa_fcpim_add_iostats(lstats, rstats, iocom_utags);
-	bfa_fcpim_add_iostats(lstats, rstats, io_cleanups);
-	bfa_fcpim_add_iostats(lstats, rstats, io_tmaborts);
-	bfa_fcpim_add_iostats(lstats, rstats, onlines);
-	bfa_fcpim_add_iostats(lstats, rstats, offlines);
-	bfa_fcpim_add_iostats(lstats, rstats, creates);
-	bfa_fcpim_add_iostats(lstats, rstats, deletes);
-	bfa_fcpim_add_iostats(lstats, rstats, create_comps);
-	bfa_fcpim_add_iostats(lstats, rstats, delete_comps);
-	bfa_fcpim_add_iostats(lstats, rstats, sler_events);
-	bfa_fcpim_add_iostats(lstats, rstats, fw_create);
-	bfa_fcpim_add_iostats(lstats, rstats, fw_delete);
-	bfa_fcpim_add_iostats(lstats, rstats, ioc_disabled);
-	bfa_fcpim_add_iostats(lstats, rstats, cleanup_comps);
-	bfa_fcpim_add_iostats(lstats, rstats, tm_cmnds);
-	bfa_fcpim_add_iostats(lstats, rstats, tm_fw_rsps);
-	bfa_fcpim_add_iostats(lstats, rstats, tm_success);
-	bfa_fcpim_add_iostats(lstats, rstats, tm_failures);
-	bfa_fcpim_add_iostats(lstats, rstats, tm_io_comps);
-	bfa_fcpim_add_iostats(lstats, rstats, tm_qresumes);
-	bfa_fcpim_add_iostats(lstats, rstats, tm_iocdowns);
-	bfa_fcpim_add_iostats(lstats, rstats, tm_cleanups);
-	bfa_fcpim_add_iostats(lstats, rstats, tm_cleanup_comps);
-	bfa_fcpim_add_iostats(lstats, rstats, io_comps);
-	bfa_fcpim_add_iostats(lstats, rstats, input_reqs);
-	bfa_fcpim_add_iostats(lstats, rstats, output_reqs);
-	bfa_fcpim_add_iostats(lstats, rstats, rd_throughput);
-	bfa_fcpim_add_iostats(lstats, rstats, wr_throughput);
-}
-
-void
 bfa_fcpim_path_tov_set(struct bfa_s *bfa, u16 path_tov)
 {
 	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
@@ -454,128 +385,6 @@ bfa_fcpim_path_tov_get(struct bfa_s *bfa)
 	return fcpim->path_tov / 1000;
 }
 
-bfa_status_t
-bfa_fcpim_port_iostats(struct bfa_s *bfa, struct bfa_itnim_iostats_s *stats,
-	u8 lp_tag)
-{
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
-	struct list_head *qe, *qen;
-	struct bfa_itnim_s *itnim;
-
-	/* accumulate IO stats from itnim */
-	memset(stats, 0, sizeof(struct bfa_itnim_iostats_s));
-	list_for_each_safe(qe, qen, &fcpim->itnim_q) {
-		itnim = (struct bfa_itnim_s *) qe;
-		if (itnim->rport->rport_info.lp_tag != lp_tag)
-			continue;
-		bfa_fcpim_add_stats(stats, &(itnim->stats));
-	}
-	return BFA_STATUS_OK;
-}
-bfa_status_t
-bfa_fcpim_get_modstats(struct bfa_s *bfa, struct bfa_itnim_iostats_s *modstats)
-{
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
-	struct list_head *qe, *qen;
-	struct bfa_itnim_s *itnim;
-
-	/* accumulate IO stats from itnim */
-	memset(modstats, 0, sizeof(struct bfa_itnim_iostats_s));
-	list_for_each_safe(qe, qen, &fcpim->itnim_q) {
-		itnim = (struct bfa_itnim_s *) qe;
-		bfa_fcpim_add_stats(modstats, &(itnim->stats));
-	}
-	return BFA_STATUS_OK;
-}
-
-bfa_status_t
-bfa_fcpim_get_del_itn_stats(struct bfa_s *bfa,
-	 struct bfa_fcpim_del_itn_stats_s *modstats)
-{
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
-
-	*modstats = fcpim->del_itn_stats;
-
-	return BFA_STATUS_OK;
-}
-
-
-bfa_status_t
-bfa_fcpim_profile_on(struct bfa_s *bfa, u32 time)
-{
-	struct bfa_itnim_s *itnim;
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
-	struct list_head *qe, *qen;
-
-	/* accumulate IO stats from itnim */
-	list_for_each_safe(qe, qen, &fcpim->itnim_q) {
-		itnim = (struct bfa_itnim_s *) qe;
-		bfa_itnim_clear_stats(itnim);
-	}
-	fcpim->io_profile = BFA_TRUE;
-	fcpim->io_profile_start_time = time;
-	fcpim->profile_comp = bfa_ioim_profile_comp;
-	fcpim->profile_start = bfa_ioim_profile_start;
-
-	return BFA_STATUS_OK;
-}
-bfa_status_t
-bfa_fcpim_profile_off(struct bfa_s *bfa)
-{
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
-	fcpim->io_profile = BFA_FALSE;
-	fcpim->io_profile_start_time = 0;
-	fcpim->profile_comp = NULL;
-	fcpim->profile_start = NULL;
-	return BFA_STATUS_OK;
-}
-
-bfa_status_t
-bfa_fcpim_port_clear_iostats(struct bfa_s *bfa, u8 lp_tag)
-{
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
-	struct list_head *qe, *qen;
-	struct bfa_itnim_s *itnim;
-
-	/* clear IO stats from all active itnims */
-	list_for_each_safe(qe, qen, &fcpim->itnim_q) {
-		itnim = (struct bfa_itnim_s *) qe;
-		if (itnim->rport->rport_info.lp_tag != lp_tag)
-			continue;
-		bfa_itnim_clear_stats(itnim);
-	}
-	return BFA_STATUS_OK;
-
-}
-
-bfa_status_t
-bfa_fcpim_clr_modstats(struct bfa_s *bfa)
-{
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
-	struct list_head *qe, *qen;
-	struct bfa_itnim_s *itnim;
-
-	/* clear IO stats from all active itnims */
-	list_for_each_safe(qe, qen, &fcpim->itnim_q) {
-		itnim = (struct bfa_itnim_s *) qe;
-		bfa_itnim_clear_stats(itnim);
-	}
-	memset(&fcpim->del_itn_stats, 0,
-		sizeof(struct bfa_fcpim_del_itn_stats_s));
-
-	return BFA_STATUS_OK;
-}
-
-void
-bfa_fcpim_qdepth_set(struct bfa_s *bfa, u16 q_depth)
-{
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
-
-	bfa_assert(q_depth <= BFA_IOCFC_QDEPTH_MAX);
-
-	fcpim->q_depth = q_depth;
-}
-
 u16
 bfa_fcpim_qdepth_get(struct bfa_s *bfa)
 {
@@ -584,32 +393,12 @@ bfa_fcpim_qdepth_get(struct bfa_s *bfa)
 	return fcpim->q_depth;
 }
 
-void
-bfa_fcpim_update_ioredirect(struct bfa_s *bfa)
-{
-	bfa_boolean_t ioredirect;
-
-	/*
-	 * IO redirection is turned off when QoS is enabled and vice versa
-	 */
-	ioredirect = bfa_fcport_is_qos_enabled(bfa) ? BFA_FALSE : BFA_TRUE;
-}
-
-void
-bfa_fcpim_set_ioredirect(struct bfa_s *bfa, bfa_boolean_t state)
-{
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
-	fcpim->ioredirect = state;
-}
-
-
-
 /*
  *  BFA ITNIM module state machine functions
  */
 
 /*
- *	Beginning/unallocated state - no events expected.
+ * Beginning/unallocated state - no events expected.
  */
 static void
 bfa_itnim_sm_uninit(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
@@ -630,7 +419,7 @@ bfa_itnim_sm_uninit(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 }
 
 /*
- *	Beginning state, only online event expected.
+ * Beginning state, only online event expected.
  */
 static void
 bfa_itnim_sm_created(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
@@ -733,7 +522,7 @@ bfa_itnim_sm_fwcreate_qfull(struct bfa_itnim_s *itnim,
 }
 
 /*
- *	Waiting for itnim create response from firmware, a delete is pending.
+ * Waiting for itnim create response from firmware, a delete is pending.
  */
 static void
 bfa_itnim_sm_delete_pending(struct bfa_itnim_s *itnim,
@@ -761,7 +550,7 @@ bfa_itnim_sm_delete_pending(struct bfa_itnim_s *itnim,
 }
 
 /*
- *	Online state - normal parking state.
+ * Online state - normal parking state.
  */
 static void
 bfa_itnim_sm_online(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
@@ -803,7 +592,7 @@ bfa_itnim_sm_online(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 }
 
 /*
- *	Second level error recovery need.
+ * Second level error recovery need.
  */
 static void
 bfa_itnim_sm_sler(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
@@ -834,7 +623,7 @@ bfa_itnim_sm_sler(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 }
 
 /*
- *	Going offline. Waiting for active IO cleanup.
+ * Going offline. Waiting for active IO cleanup.
  */
 static void
 bfa_itnim_sm_cleanup_offline(struct bfa_itnim_s *itnim,
@@ -871,7 +660,7 @@ bfa_itnim_sm_cleanup_offline(struct bfa_itnim_s *itnim,
 }
 
 /*
- *	Deleting itnim. Waiting for active IO cleanup.
+ * Deleting itnim. Waiting for active IO cleanup.
  */
 static void
 bfa_itnim_sm_cleanup_delete(struct bfa_itnim_s *itnim,
@@ -956,7 +745,7 @@ bfa_itnim_sm_fwdelete_qfull(struct bfa_itnim_s *itnim,
 }
 
 /*
- *	Offline state.
+ * Offline state.
  */
 static void
 bfa_itnim_sm_offline(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
@@ -987,9 +776,6 @@ bfa_itnim_sm_offline(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
 	}
 }
 
-/*
- *	IOC h/w failed state.
- */
 static void
 bfa_itnim_sm_iocdisable(struct bfa_itnim_s *itnim,
 				enum bfa_itnim_event event)
@@ -1024,7 +810,7 @@ bfa_itnim_sm_iocdisable(struct bfa_itnim_s *itnim,
 }
 
 /*
- *	Itnim is deleted, waiting for firmware response to delete.
+ * Itnim is deleted, waiting for firmware response to delete.
  */
 static void
 bfa_itnim_sm_deleting(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
@@ -1069,7 +855,7 @@ bfa_itnim_sm_deleting_qfull(struct bfa_itnim_s *itnim,
 }
 
 /*
- *	Initiate cleanup of all IOs on an IOC failure.
+ * Initiate cleanup of all IOs on an IOC failure.
  */
 static void
 bfa_itnim_iocdisable_cleanup(struct bfa_itnim_s *itnim)
@@ -1103,7 +889,7 @@ bfa_itnim_iocdisable_cleanup(struct bfa_itnim_s *itnim)
 }
 
 /*
- *	IO cleanup completion
+ * IO cleanup completion
  */
 static void
 bfa_itnim_cleanp_comp(void *itnim_cbarg)
@@ -1115,7 +901,7 @@ bfa_itnim_cleanp_comp(void *itnim_cbarg)
 }
 
 /*
- *	Initiate cleanup of all IOs.
+ * Initiate cleanup of all IOs.
  */
 static void
 bfa_itnim_cleanup(struct bfa_itnim_s *itnim)
@@ -1187,9 +973,6 @@ bfa_itnim_qresume(void *cbarg)
 	bfa_sm_send_event(itnim, BFA_ITNIM_SM_QRESUME);
 }
 
-
-
-
 /*
  *  bfa_itnim_public
  */
@@ -1401,7 +1184,7 @@ bfa_itnim_iotov_start(struct bfa_itnim_s *itnim)
 	if (itnim->fcpim->path_tov > 0) {
 
 		itnim->iotov_active = BFA_TRUE;
-		bfa_assert(bfa_itnim_hold_io(itnim));
+		WARN_ON(!bfa_itnim_hold_io(itnim));
 		bfa_timer_start(itnim->bfa, &itnim->timer,
 			bfa_itnim_iotov, itnim, itnim->fcpim->path_tov);
 	}
@@ -1457,14 +1240,12 @@ bfa_itnim_update_del_itn_stats(struct bfa_itnim_s *itnim)
 	fcpim->del_itn_stats.del_tm_iocdowns += itnim->stats.tm_iocdowns;
 }
 
-
-
 /*
- *  bfa_itnim_public
+ * bfa_itnim_public
  */
 
 /*
- *	Itnim interrupt processing.
+ * Itnim interrupt processing.
  */
 void
 bfa_itnim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
@@ -1481,7 +1262,7 @@ bfa_itnim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 	case BFI_ITNIM_I2H_CREATE_RSP:
 		itnim = BFA_ITNIM_FROM_TAG(fcpim,
 						msg.create_rsp->bfa_handle);
-		bfa_assert(msg.create_rsp->status == BFA_STATUS_OK);
+		WARN_ON(msg.create_rsp->status != BFA_STATUS_OK);
 		bfa_stats(itnim, create_comps);
 		bfa_sm_send_event(itnim, BFA_ITNIM_SM_FWRSP);
 		break;
@@ -1489,7 +1270,7 @@ bfa_itnim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 	case BFI_ITNIM_I2H_DELETE_RSP:
 		itnim = BFA_ITNIM_FROM_TAG(fcpim,
 						msg.delete_rsp->bfa_handle);
-		bfa_assert(msg.delete_rsp->status == BFA_STATUS_OK);
+		WARN_ON(msg.delete_rsp->status != BFA_STATUS_OK);
 		bfa_stats(itnim, delete_comps);
 		bfa_sm_send_event(itnim, BFA_ITNIM_SM_FWRSP);
 		break;
@@ -1503,14 +1284,12 @@ bfa_itnim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 
 	default:
 		bfa_trc(bfa, m->mhdr.msg_id);
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
 
-
-
 /*
- *  bfa_itnim_api
+ * bfa_itnim_api
  */
 
 struct bfa_itnim_s *
@@ -1520,7 +1299,7 @@ bfa_itnim_create(struct bfa_s *bfa, struct bfa_rport_s *rport, void *ditn)
 	struct bfa_itnim_s *itnim;
 
 	itnim = BFA_ITNIM_FROM_TAG(fcpim, rport->rport_tag);
-	bfa_assert(itnim->rport == rport);
+	WARN_ON(itnim->rport != rport);
 
 	itnim->ditn = ditn;
 
@@ -1568,31 +1347,6 @@ bfa_itnim_hold_io(struct bfa_itnim_s *itnim)
 		 bfa_sm_cmp_state(itnim, bfa_itnim_sm_iocdisable));
 }
 
-bfa_status_t
-bfa_itnim_get_ioprofile(struct bfa_itnim_s *itnim,
-		struct bfa_itnim_ioprofile_s *ioprofile)
-{
-	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(itnim->bfa);
-	if (!fcpim->io_profile)
-		return BFA_STATUS_IOPROFILE_OFF;
-
-	itnim->ioprofile.index = BFA_IOBUCKET_MAX;
-	itnim->ioprofile.io_profile_start_time =
-		bfa_io_profile_start_time(itnim->bfa);
-	itnim->ioprofile.clock_res_mul = bfa_io_lat_clock_res_mul;
-	itnim->ioprofile.clock_res_div = bfa_io_lat_clock_res_div;
-	*ioprofile = itnim->ioprofile;
-
-	return BFA_STATUS_OK;
-}
-
-void
-bfa_itnim_get_stats(struct bfa_itnim_s *itnim,
-	struct bfa_itnim_iostats_s *stats)
-{
-	*stats = itnim->stats;
-}
-
 void
 bfa_itnim_clear_stats(struct bfa_itnim_s *itnim)
 {
@@ -1608,14 +1362,11 @@ bfa_itnim_clear_stats(struct bfa_itnim_s *itnim)
  */
 
 /*
- *	IO is not started (unallocated).
+ * IO is not started (unallocated).
  */
 static void
 bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 {
-	bfa_trc_fp(ioim->bfa, ioim->iotag);
-	bfa_trc_fp(ioim->bfa, event);
-
 	switch (event) {
 	case BFA_IOIM_SM_START:
 		if (!bfa_itnim_is_online(ioim->itnim)) {
@@ -1635,7 +1386,7 @@ bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		}
 
 		if (ioim->nsges > BFI_SGE_INLINE) {
-			if (!bfa_ioim_sge_setup(ioim)) {
+			if (!bfa_ioim_sgpg_alloc(ioim)) {
 				bfa_sm_set_state(ioim, bfa_ioim_sm_sgalloc);
 				return;
 			}
@@ -1662,7 +1413,7 @@ bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		 * requests immediately.
 		 */
 		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
-		bfa_assert(bfa_q_is_on_q(&ioim->itnim->pending_q, ioim));
+		WARN_ON(!bfa_q_is_on_q(&ioim->itnim->pending_q, ioim));
 		bfa_cb_queue(ioim->bfa, &ioim->hcb_qe,
 				__bfa_cb_ioim_abort, ioim);
 		break;
@@ -1673,7 +1424,7 @@ bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 }
 
 /*
- *	IO is waiting for SG pages.
+ * IO is waiting for SG pages.
  */
 static void
 bfa_ioim_sm_sgalloc(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
@@ -1720,14 +1471,11 @@ bfa_ioim_sm_sgalloc(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 }
 
 /*
- *	IO is active.
+ * IO is active.
  */
 static void
 bfa_ioim_sm_active(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 {
-	bfa_trc_fp(ioim->bfa, ioim->iotag);
-	bfa_trc_fp(ioim->bfa, event);
-
 	switch (event) {
 	case BFA_IOIM_SM_COMP_GOOD:
 		bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
@@ -1786,8 +1534,8 @@ bfa_ioim_sm_active(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	case BFA_IOIM_SM_SQRETRY:
-		if (bfa_ioim_get_iotag(ioim) != BFA_TRUE) {
-			/* max retry completed free IO */
+		if (bfa_ioim_maxretry_reached(ioim)) {
+			/* max retry reached, free IO */
 			bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
 			bfa_ioim_move_to_comp_q(ioim);
 			bfa_cb_queue(ioim->bfa, &ioim->hcb_qe,
@@ -1804,17 +1552,15 @@ bfa_ioim_sm_active(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 }
 
 /*
-*	IO is retried with new tag.
-*/
+ * IO is retried with new tag.
+ */
 static void
 bfa_ioim_sm_cmnd_retry(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 {
-	bfa_trc_fp(ioim->bfa, ioim->iotag);
-	bfa_trc_fp(ioim->bfa, event);
-
 	switch (event) {
 	case BFA_IOIM_SM_FREE:
 		/* abts and rrq done. Now retry the IO with new tag */
+		bfa_ioim_update_iotag(ioim);
 		if (!bfa_ioim_send_ioreq(ioim)) {
 			bfa_sm_set_state(ioim, bfa_ioim_sm_qfull);
 			break;
@@ -1858,7 +1604,7 @@ bfa_ioim_sm_cmnd_retry(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 }
 
 /*
- *	IO is being aborted, waiting for completion from firmware.
+ * IO is being aborted, waiting for completion from firmware.
  */
 static void
 bfa_ioim_sm_abort(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
@@ -1894,7 +1640,7 @@ bfa_ioim_sm_abort(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	case BFA_IOIM_SM_CLEANUP:
-		bfa_assert(ioim->iosp->abort_explicit == BFA_TRUE);
+		WARN_ON(ioim->iosp->abort_explicit != BFA_TRUE);
 		ioim->iosp->abort_explicit = BFA_FALSE;
 
 		if (bfa_ioim_send_abort(ioim))
@@ -1981,7 +1727,7 @@ bfa_ioim_sm_cleanup(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 }
 
 /*
- *	IO is waiting for room in request CQ
+ * IO is waiting for room in request CQ
  */
 static void
 bfa_ioim_sm_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
@@ -2025,7 +1771,7 @@ bfa_ioim_sm_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 }
 
 /*
- *	Active IO is being aborted, waiting for room in request CQ.
+ * Active IO is being aborted, waiting for room in request CQ.
  */
 static void
 bfa_ioim_sm_abort_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
@@ -2040,7 +1786,7 @@ bfa_ioim_sm_abort_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 		break;
 
 	case BFA_IOIM_SM_CLEANUP:
-		bfa_assert(ioim->iosp->abort_explicit == BFA_TRUE);
+		WARN_ON(ioim->iosp->abort_explicit != BFA_TRUE);
 		ioim->iosp->abort_explicit = BFA_FALSE;
 		bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup_qfull);
 		break;
@@ -2076,7 +1822,7 @@ bfa_ioim_sm_abort_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 }
 
 /*
- *	Active IO is being cleaned up, waiting for room in request CQ.
+ * Active IO is being cleaned up, waiting for room in request CQ.
  */
 static void
 bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
@@ -2131,9 +1877,6 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 static void
 bfa_ioim_sm_hcb(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 {
-	bfa_trc_fp(ioim->bfa, ioim->iotag);
-	bfa_trc_fp(ioim->bfa, event);
-
 	switch (event) {
 	case BFA_IOIM_SM_HCB:
 		bfa_sm_set_state(ioim, bfa_ioim_sm_uninit);
@@ -2213,11 +1956,6 @@ bfa_ioim_sm_resfree(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
 }
 
 
-
-/*
- *  hal_ioim_private
- */
-
 static void
 __bfa_cb_ioim_good_comp(void *cbarg, bfa_boolean_t complete)
 {
@@ -2323,7 +2061,7 @@ bfa_ioim_sgpg_alloced(void *cbarg)
 
 	ioim->nsgpgs = BFA_SGPG_NPAGE(ioim->nsges);
 	list_splice_tail_init(&ioim->iosp->sgpg_wqe.sgpg_q, &ioim->sgpg_q);
-	bfa_ioim_sgpg_setup(ioim);
+	ioim->sgpg = bfa_q_first(&ioim->sgpg_q);
 	bfa_sm_send_event(ioim, BFA_IOIM_SM_SGALLOCED);
 }
 
@@ -2335,13 +2073,16 @@ bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim)
 {
 	struct bfa_itnim_s *itnim = ioim->itnim;
 	struct bfi_ioim_req_s *m;
-	static struct fcp_cmnd_s cmnd_z0 = { 0 };
-	struct bfi_sge_s      *sge;
+	static struct fcp_cmnd_s cmnd_z0 = { { { 0 } } };
+	struct bfi_sge_s *sge, *sgpge;
 	u32	pgdlen = 0;
 	u32	fcp_dl;
 	u64 addr;
 	struct scatterlist *sg;
+	struct bfa_sgpg_s *sgpg;
 	struct scsi_cmnd *cmnd = (struct scsi_cmnd *) ioim->dio;
+	u32 i, sge_id, pgcumsz;
+	enum dma_data_direction dmadir;
 
 	/*
 	 * check for room in queue to send request now
@@ -2359,22 +2100,61 @@ bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim)
 	 */
 	m->io_tag = cpu_to_be16(ioim->iotag);
 	m->rport_hdl = ioim->itnim->rport->fw_handle;
-	m->io_timeout = bfa_cb_ioim_get_timeout(ioim->dio);
+	m->io_timeout = 0;
 
-	/*
-	 * build inline IO SG element here
-	 */
 	sge = &m->sges[0];
-	if (ioim->nsges) {
-		sg = (struct scatterlist *)scsi_sglist(cmnd);
-		addr = bfa_os_sgaddr(sg_dma_address(sg));
-		sge->sga = *(union bfi_addr_u *) &addr;
-		pgdlen = sg_dma_len(sg);
-		sge->sg_len = pgdlen;
-		sge->flags = (ioim->nsges > BFI_SGE_INLINE) ?
+	sgpg = ioim->sgpg;
+	sge_id = 0;
+	sgpge = NULL;
+	pgcumsz = 0;
+	scsi_for_each_sg(cmnd, sg, ioim->nsges, i) {
+		if (i == 0) {
+			/* build inline IO SG element */
+			addr = bfa_sgaddr_le(sg_dma_address(sg));
+			sge->sga = *(union bfi_addr_u *) &addr;
+			pgdlen = sg_dma_len(sg);
+			sge->sg_len = pgdlen;
+			sge->flags = (ioim->nsges > BFI_SGE_INLINE) ?
 					BFI_SGE_DATA_CPL : BFI_SGE_DATA_LAST;
-		bfa_sge_to_be(sge);
-		sge++;
+			bfa_sge_to_be(sge);
+			sge++;
+		} else {
+			if (sge_id == 0)
+				sgpge = sgpg->sgpg->sges;
+
+			addr = bfa_sgaddr_le(sg_dma_address(sg));
+			sgpge->sga = *(union bfi_addr_u *) &addr;
+			sgpge->sg_len = sg_dma_len(sg);
+			pgcumsz += sgpge->sg_len;
+
+			/* set flags */
+			if (i < (ioim->nsges - 1) &&
+					sge_id < (BFI_SGPG_DATA_SGES - 1))
+				sgpge->flags = BFI_SGE_DATA;
+			else if (i < (ioim->nsges - 1))
+				sgpge->flags = BFI_SGE_DATA_CPL;
+			else
+				sgpge->flags = BFI_SGE_DATA_LAST;
+
+			bfa_sge_to_le(sgpge);
+
+			sgpge++;
+			if (i == (ioim->nsges - 1)) {
+				sgpge->flags = BFI_SGE_PGDLEN;
+				sgpge->sga.a32.addr_lo = 0;
+				sgpge->sga.a32.addr_hi = 0;
+				sgpge->sg_len = pgcumsz;
+				bfa_sge_to_le(sgpge);
+			} else if (++sge_id == BFI_SGPG_DATA_SGES) {
+				sgpg = (struct bfa_sgpg_s *) bfa_q_next(sgpg);
+				sgpge->flags = BFI_SGE_LINK;
+				sgpge->sga = sgpg->sgpg_pa;
+				sgpge->sg_len = pgcumsz;
+				bfa_sge_to_le(sgpge);
+				sge_id = 0;
+				pgcumsz = 0;
+			}
+		}
 	}
 
 	if (ioim->nsges > BFI_SGE_INLINE) {
@@ -2391,10 +2171,17 @@ bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim)
 	 * set up I/O command parameters
 	 */
 	m->cmnd = cmnd_z0;
-	m->cmnd.lun = bfa_cb_ioim_get_lun(ioim->dio);
-	m->cmnd.iodir = bfa_cb_ioim_get_iodir(ioim->dio);
-	m->cmnd.cdb = *(scsi_cdb_t *)bfa_cb_ioim_get_cdb(ioim->dio);
-	fcp_dl = bfa_cb_ioim_get_size(ioim->dio);
+	int_to_scsilun(cmnd->device->lun, &m->cmnd.lun);
+	dmadir = cmnd->sc_data_direction;
+	if (dmadir == DMA_TO_DEVICE)
+		m->cmnd.iodir = FCP_IODIR_WRITE;
+	else if (dmadir == DMA_FROM_DEVICE)
+		m->cmnd.iodir = FCP_IODIR_READ;
+	else
+		m->cmnd.iodir = FCP_IODIR_NONE;
+
+	m->cmnd.cdb = *(struct scsi_cdb_s *) cmnd->cmnd;
+	fcp_dl = scsi_bufflen(cmnd);
 	m->cmnd.fcp_dl = cpu_to_be32(fcp_dl);
 
 	/*
@@ -2418,28 +2205,9 @@ bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim)
 		bfi_h2i_set(m->mh, BFI_MC_IOIM_IO, 0, bfa_lpuid(ioim->bfa));
 	}
 	if (itnim->seq_rec ||
-	    (bfa_cb_ioim_get_size(ioim->dio) & (sizeof(u32) - 1)))
+	    (scsi_bufflen(cmnd) & (sizeof(u32) - 1)))
 		bfi_h2i_set(m->mh, BFI_MC_IOIM_IO, 0, bfa_lpuid(ioim->bfa));
 
-#ifdef IOIM_ADVANCED
-	m->cmnd.crn = bfa_cb_ioim_get_crn(ioim->dio);
-	m->cmnd.priority = bfa_cb_ioim_get_priority(ioim->dio);
-	m->cmnd.taskattr = bfa_cb_ioim_get_taskattr(ioim->dio);
-
-	/*
-	 * Handle large CDB (>16 bytes).
-	 */
-	m->cmnd.addl_cdb_len = (bfa_cb_ioim_get_cdblen(ioim->dio) -
-					FCP_CMND_CDB_LEN) / sizeof(u32);
-	if (m->cmnd.addl_cdb_len) {
-		memcpy(&m->cmnd.cdb + 1, (scsi_cdb_t *)
-				bfa_cb_ioim_get_cdb(ioim->dio) + 1,
-				m->cmnd.addl_cdb_len * sizeof(u32));
-		fcp_cmnd_fcpdl(&m->cmnd) =
-				cpu_to_be32(bfa_cb_ioim_get_size(ioim->dio));
-	}
-#endif
-
 	/*
 	 * queue I/O message to firmware
 	 */
@@ -2452,11 +2220,11 @@ bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim)
  * at queuing time.
  */
 static bfa_boolean_t
-bfa_ioim_sge_setup(struct bfa_ioim_s *ioim)
+bfa_ioim_sgpg_alloc(struct bfa_ioim_s *ioim)
 {
 	u16	nsgpgs;
 
-	bfa_assert(ioim->nsges > BFI_SGE_INLINE);
+	WARN_ON(ioim->nsges <= BFI_SGE_INLINE);
 
 	/*
 	 * allocate SG pages needed
@@ -2472,73 +2240,11 @@ bfa_ioim_sge_setup(struct bfa_ioim_s *ioim)
 	}
 
 	ioim->nsgpgs = nsgpgs;
-	bfa_ioim_sgpg_setup(ioim);
+	ioim->sgpg = bfa_q_first(&ioim->sgpg_q);
 
 	return BFA_TRUE;
 }
 
-static void
-bfa_ioim_sgpg_setup(struct bfa_ioim_s *ioim)
-{
-	int		sgeid, nsges, i;
-	struct bfi_sge_s      *sge;
-	struct bfa_sgpg_s *sgpg;
-	u32	pgcumsz;
-	u64        addr;
-	struct scatterlist *sg;
-	struct scsi_cmnd *cmnd = (struct scsi_cmnd *) ioim->dio;
-
-	sgeid = BFI_SGE_INLINE;
-	ioim->sgpg = sgpg = bfa_q_first(&ioim->sgpg_q);
-
-	sg = scsi_sglist(cmnd);
-	sg = sg_next(sg);
-
-	do {
-		sge = sgpg->sgpg->sges;
-		nsges = ioim->nsges - sgeid;
-		if (nsges > BFI_SGPG_DATA_SGES)
-			nsges = BFI_SGPG_DATA_SGES;
-
-		pgcumsz = 0;
-		for (i = 0; i < nsges; i++, sge++, sgeid++, sg = sg_next(sg)) {
-			addr = bfa_os_sgaddr(sg_dma_address(sg));
-			sge->sga = *(union bfi_addr_u *) &addr;
-			sge->sg_len = sg_dma_len(sg);
-			pgcumsz += sge->sg_len;
-
-			/*
-			 * set flags
-			 */
-			if (i < (nsges - 1))
-				sge->flags = BFI_SGE_DATA;
-			else if (sgeid < (ioim->nsges - 1))
-				sge->flags = BFI_SGE_DATA_CPL;
-			else
-				sge->flags = BFI_SGE_DATA_LAST;
-
-			bfa_sge_to_le(sge);
-		}
-
-		sgpg = (struct bfa_sgpg_s *) bfa_q_next(sgpg);
-
-		/*
-		 * set the link element of each page
-		 */
-		if (sgeid == ioim->nsges) {
-			sge->flags = BFI_SGE_PGDLEN;
-			sge->sga.a32.addr_lo = 0;
-			sge->sga.a32.addr_hi = 0;
-		} else {
-			sge->flags = BFI_SGE_LINK;
-			sge->sga = sgpg->sgpg_pa;
-		}
-		sge->sg_len = pgcumsz;
-
-		bfa_sge_to_le(sge);
-	} while (sgeid < ioim->nsges);
-}
-
 /*
  * Send I/O abort request to firmware.
  */
@@ -2605,7 +2311,7 @@ bfa_ioim_notify_cleanup(struct bfa_ioim_s *ioim)
 		}
 		bfa_itnim_iodone(ioim->itnim);
 	} else
-		bfa_tskim_iodone(ioim->iosp->tskim);
+		bfa_wc_down(&ioim->iosp->tskim->wc);
 }
 
 static bfa_boolean_t
@@ -2623,9 +2329,6 @@ bfa_ioim_is_abortable(struct bfa_ioim_s *ioim)
 	return BFA_TRUE;
 }
 
-/*
- *	or after the link comes back.
- */
 void
 bfa_ioim_delayed_comp(struct bfa_ioim_s *ioim, bfa_boolean_t iotov)
 {
@@ -2653,11 +2356,6 @@ bfa_ioim_delayed_comp(struct bfa_ioim_s *ioim, bfa_boolean_t iotov)
 }
 
 
-
-/*
- *  hal_ioim_friend
- */
-
 /*
  * Memory allocation and initialization.
  */
@@ -2722,14 +2420,6 @@ bfa_ioim_attach(struct bfa_fcpim_mod_s *fcpim, struct bfa_meminfo_s *minfo)
 	}
 }
 
-/*
- * Driver detach time call.
- */
-void
-bfa_ioim_detach(struct bfa_fcpim_mod_s *fcpim)
-{
-}
-
 void
 bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 {
@@ -2742,7 +2432,7 @@ bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 	iotag = be16_to_cpu(rsp->io_tag);
 
 	ioim = BFA_IOIM_FROM_TAG(fcpim, iotag);
-	bfa_assert(ioim->iotag == iotag);
+	WARN_ON(ioim->iotag != iotag);
 
 	bfa_trc(ioim->bfa, ioim->iotag);
 	bfa_trc(ioim->bfa, rsp->io_status);
@@ -2773,13 +2463,13 @@ bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 
 	case BFI_IOIM_STS_PROTO_ERR:
 		bfa_stats(ioim->itnim, iocom_proto_err);
-		bfa_assert(rsp->reuse_io_tag);
+		WARN_ON(!rsp->reuse_io_tag);
 		evt = BFA_IOIM_SM_COMP;
 		break;
 
 	case BFI_IOIM_STS_SQER_NEEDED:
 		bfa_stats(ioim->itnim, iocom_sqer_needed);
-		bfa_assert(rsp->reuse_io_tag == 0);
+		WARN_ON(rsp->reuse_io_tag != 0);
 		evt = BFA_IOIM_SM_SQRETRY;
 		break;
 
@@ -2808,7 +2498,7 @@ bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 		break;
 
 	default:
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 
 	bfa_sm_send_event(ioim, evt);
@@ -2825,39 +2515,12 @@ bfa_ioim_good_comp_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 	iotag = be16_to_cpu(rsp->io_tag);
 
 	ioim = BFA_IOIM_FROM_TAG(fcpim, iotag);
-	bfa_assert(ioim->iotag == iotag);
+	WARN_ON(BFA_IOIM_TAG_2_ID(ioim->iotag) != iotag);
 
-	bfa_trc_fp(ioim->bfa, ioim->iotag);
 	bfa_ioim_cb_profile_comp(fcpim, ioim);
-
 	bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP_GOOD);
 }
 
-void
-bfa_ioim_profile_start(struct bfa_ioim_s *ioim)
-{
-	ioim->start_time = jiffies;
-}
-
-void
-bfa_ioim_profile_comp(struct bfa_ioim_s *ioim)
-{
-	u32 fcp_dl = bfa_cb_ioim_get_size(ioim->dio);
-	u32 index = bfa_ioim_get_index(fcp_dl);
-	u64 end_time = jiffies;
-	struct bfa_itnim_latency_s *io_lat =
-			&(ioim->itnim->ioprofile.io_latency);
-	u32 val = (u32)(end_time - ioim->start_time);
-
-	bfa_itnim_ioprofile_update(ioim->itnim, index);
-
-	io_lat->count[index]++;
-	io_lat->min[index] = (io_lat->min[index] < val) ?
-		io_lat->min[index] : val;
-	io_lat->max[index] = (io_lat->max[index] > val) ?
-		io_lat->max[index] : val;
-	io_lat->avg[index] += val;
-}
 /*
  * Called by itnim to clean up IO while going offline.
  */
@@ -2903,11 +2566,6 @@ bfa_ioim_tov(struct bfa_ioim_s *ioim)
 }
 
 
-
-/*
- *  hal_ioim_api
- */
-
 /*
  * Allocate IOIM resource for initiator mode I/O request.
  */
@@ -2936,7 +2594,6 @@ bfa_ioim_alloc(struct bfa_s *bfa, struct bfad_ioim_s *dio,
 	fcpim->ios_active++;
 
 	list_add_tail(&ioim->qe, &itnim->io_q);
-	bfa_trc_fp(ioim->bfa, ioim->iotag);
 
 	return ioim;
 }
@@ -2946,18 +2603,13 @@ bfa_ioim_free(struct bfa_ioim_s *ioim)
 {
 	struct bfa_fcpim_mod_s *fcpim = ioim->fcpim;
 
-	bfa_trc_fp(ioim->bfa, ioim->iotag);
-	bfa_assert_fp(bfa_sm_cmp_state(ioim, bfa_ioim_sm_uninit));
-
-	bfa_assert_fp(list_empty(&ioim->sgpg_q) ||
-			(ioim->nsges > BFI_SGE_INLINE));
-
 	if (ioim->nsgpgs > 0)
 		bfa_sgpg_mfree(ioim->bfa, &ioim->sgpg_q, ioim->nsgpgs);
 
 	bfa_stats(ioim->itnim, io_comps);
 	fcpim->ios_active--;
 
+	ioim->iotag &= BFA_IOIM_IOTAG_MASK;
 	list_del(&ioim->qe);
 	list_add_tail(&ioim->qe, &fcpim->ioim_free_q);
 }
@@ -2965,16 +2617,13 @@ bfa_ioim_free(struct bfa_ioim_s *ioim)
 void
 bfa_ioim_start(struct bfa_ioim_s *ioim)
 {
-	bfa_trc_fp(ioim->bfa, ioim->iotag);
-
 	bfa_ioim_cb_profile_start(ioim->fcpim, ioim);
 
 	/*
 	 * Obtain the queue over which this request has to be issued
 	 */
 	ioim->reqq = bfa_fcpim_ioredirect_enabled(ioim->bfa) ?
-			bfa_cb_ioim_get_reqq(ioim->dio) :
-			bfa_itnim_get_reqq(ioim);
+			BFA_FALSE : bfa_itnim_get_reqq(ioim);
 
 	bfa_sm_send_event(ioim, BFA_IOIM_SM_START);
 }
@@ -2997,13 +2646,12 @@ bfa_ioim_abort(struct bfa_ioim_s *ioim)
 	return BFA_STATUS_OK;
 }
 
-
 /*
  *  BFA TSKIM state machine functions
  */
 
 /*
- *	Task management command beginning state.
+ * Task management command beginning state.
  */
 static void
 bfa_tskim_sm_uninit(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
@@ -3040,9 +2688,8 @@ bfa_tskim_sm_uninit(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 }
 
 /*
- * brief
- *	TM command is active, awaiting completion from firmware to
- *	cleanup IO requests in TM scope.
+ * TM command is active, awaiting completion from firmware to
+ * cleanup IO requests in TM scope.
  */
 static void
 bfa_tskim_sm_active(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
@@ -3077,8 +2724,8 @@ bfa_tskim_sm_active(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 }
 
 /*
- *	An active TM is being cleaned up since ITN is offline. Awaiting cleanup
- *	completion event from firmware.
+ * An active TM is being cleaned up since ITN is offline. Awaiting cleanup
+ * completion event from firmware.
  */
 static void
 bfa_tskim_sm_cleanup(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
@@ -3138,7 +2785,7 @@ bfa_tskim_sm_iocleanup(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 }
 
 /*
- *	Task management command is waiting for room in request CQ
+ * Task management command is waiting for room in request CQ
  */
 static void
 bfa_tskim_sm_qfull(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
@@ -3173,8 +2820,8 @@ bfa_tskim_sm_qfull(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 }
 
 /*
- *	Task management command is active, awaiting for room in request CQ
- *	to send clean up request.
+ * Task management command is active, awaiting for room in request CQ
+ * to send clean up request.
  */
 static void
 bfa_tskim_sm_cleanup_qfull(struct bfa_tskim_s *tskim,
@@ -3186,10 +2833,8 @@ bfa_tskim_sm_cleanup_qfull(struct bfa_tskim_s *tskim,
 	case BFA_TSKIM_SM_DONE:
 		bfa_reqq_wcancel(&tskim->reqq_wait);
 		/*
-		 *
 		 * Fall through !!!
 		 */
-
 	case BFA_TSKIM_SM_QRESUME:
 		bfa_sm_set_state(tskim, bfa_tskim_sm_cleanup);
 		bfa_tskim_send_abort(tskim);
@@ -3208,7 +2853,7 @@ bfa_tskim_sm_cleanup_qfull(struct bfa_tskim_s *tskim,
 }
 
 /*
- *	BFA callback is pending
+ * BFA callback is pending
  */
 static void
 bfa_tskim_sm_hcb(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
@@ -3233,12 +2878,6 @@ bfa_tskim_sm_hcb(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
 	}
 }
 
-
-
-/*
- *  hal_tskim_private
- */
-
 static void
 __bfa_cb_tskim_done(void *cbarg, bfa_boolean_t complete)
 {
@@ -3268,8 +2907,8 @@ __bfa_cb_tskim_failed(void *cbarg, bfa_boolean_t complete)
 				BFI_TSKIM_STS_FAILED);
 }
 
-static	bfa_boolean_t
-bfa_tskim_match_scope(struct bfa_tskim_s *tskim, lun_t lun)
+static bfa_boolean_t
+bfa_tskim_match_scope(struct bfa_tskim_s *tskim, struct scsi_lun lun)
 {
 	switch (tskim->tm_cmnd) {
 	case FCP_TM_TARGET_RESET:
@@ -3279,24 +2918,26 @@ bfa_tskim_match_scope(struct bfa_tskim_s *tskim, lun_t lun)
 	case FCP_TM_CLEAR_TASK_SET:
 	case FCP_TM_LUN_RESET:
 	case FCP_TM_CLEAR_ACA:
-		return (tskim->lun == lun);
+		return !memcmp(&tskim->lun, &lun, sizeof(lun));
 
 	default:
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 
 	return BFA_FALSE;
 }
 
 /*
- *	Gather affected IO requests and task management commands.
+ * Gather affected IO requests and task management commands.
  */
 static void
 bfa_tskim_gather_ios(struct bfa_tskim_s *tskim)
 {
 	struct bfa_itnim_s *itnim = tskim->itnim;
 	struct bfa_ioim_s *ioim;
-	struct list_head	*qe, *qen;
+	struct list_head *qe, *qen;
+	struct scsi_cmnd *cmnd;
+	struct scsi_lun scsilun;
 
 	INIT_LIST_HEAD(&tskim->io_q);
 
@@ -3305,8 +2946,9 @@ bfa_tskim_gather_ios(struct bfa_tskim_s *tskim)
 	 */
 	list_for_each_safe(qe, qen, &itnim->io_q) {
 		ioim = (struct bfa_ioim_s *) qe;
-		if (bfa_tskim_match_scope
-			(tskim, bfa_cb_ioim_get_lun(ioim->dio))) {
+		cmnd = (struct scsi_cmnd *) ioim->dio;
+		int_to_scsilun(cmnd->device->lun, &scsilun);
+		if (bfa_tskim_match_scope(tskim, scsilun)) {
 			list_del(&ioim->qe);
 			list_add_tail(&ioim->qe, &tskim->io_q);
 		}
@@ -3317,8 +2959,9 @@ bfa_tskim_gather_ios(struct bfa_tskim_s *tskim)
 	 */
 	list_for_each_safe(qe, qen, &itnim->pending_q) {
 		ioim = (struct bfa_ioim_s *) qe;
-		if (bfa_tskim_match_scope
-			(tskim, bfa_cb_ioim_get_lun(ioim->dio))) {
+		cmnd = (struct scsi_cmnd *) ioim->dio;
+		int_to_scsilun(cmnd->device->lun, &scsilun);
+		if (bfa_tskim_match_scope(tskim, scsilun)) {
 			list_del(&ioim->qe);
 			list_add_tail(&ioim->qe, &ioim->fcpim->ioim_comp_q);
 			bfa_ioim_tov(ioim);
@@ -3327,7 +2970,7 @@ bfa_tskim_gather_ios(struct bfa_tskim_s *tskim)
 }
 
 /*
- *	IO cleanup completion
+ * IO cleanup completion
  */
 static void
 bfa_tskim_cleanp_comp(void *tskim_cbarg)
@@ -3339,7 +2982,7 @@ bfa_tskim_cleanp_comp(void *tskim_cbarg)
 }
 
 /*
- *	Gather affected IO requests and task management commands.
+ * Gather affected IO requests and task management commands.
  */
 static void
 bfa_tskim_cleanup_ios(struct bfa_tskim_s *tskim)
@@ -3359,7 +3002,7 @@ bfa_tskim_cleanup_ios(struct bfa_tskim_s *tskim)
 }
 
 /*
- *	Send task management request to firmware.
+ * Send task management request to firmware.
  */
 static bfa_boolean_t
 bfa_tskim_send(struct bfa_tskim_s *tskim)
@@ -3394,7 +3037,7 @@ bfa_tskim_send(struct bfa_tskim_s *tskim)
 }
 
 /*
- *	Send abort request to cleanup an active TM to firmware.
+ * Send abort request to cleanup an active TM to firmware.
  */
 static bfa_boolean_t
 bfa_tskim_send_abort(struct bfa_tskim_s *tskim)
@@ -3425,7 +3068,7 @@ bfa_tskim_send_abort(struct bfa_tskim_s *tskim)
 }
 
 /*
- *	Call to resume task management cmnd waiting for room in request queue.
+ * Call to resume task management cmnd waiting for room in request queue.
  */
 static void
 bfa_tskim_qresume(void *cbarg)
@@ -3451,12 +3094,6 @@ bfa_tskim_iocdisable_ios(struct bfa_tskim_s *tskim)
 	}
 }
 
-
-
-/*
- *  hal_tskim_friend
- */
-
 /*
  * Notification on completions from related ioim.
  */
@@ -3489,7 +3126,7 @@ bfa_tskim_cleanup(struct bfa_tskim_s *tskim)
 }
 
 /*
- *	Memory allocation and initialization.
+ * Memory allocation and initialization.
  */
 void
 bfa_tskim_attach(struct bfa_fcpim_mod_s *fcpim, struct bfa_meminfo_s *minfo)
@@ -3522,14 +3159,6 @@ bfa_tskim_attach(struct bfa_fcpim_mod_s *fcpim, struct bfa_meminfo_s *minfo)
 }
 
 void
-bfa_tskim_detach(struct bfa_fcpim_mod_s *fcpim)
-{
-	/*
-	* @todo
-	*/
-}
-
-void
 bfa_tskim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 {
 	struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
@@ -3538,7 +3167,7 @@ bfa_tskim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 	u16	tsk_tag = be16_to_cpu(rsp->tsk_tag);
 
 	tskim = BFA_TSKIM_FROM_TAG(fcpim, tsk_tag);
-	bfa_assert(tskim->tsk_tag == tsk_tag);
+	WARN_ON(tskim->tsk_tag != tsk_tag);
 
 	tskim->tsk_status = rsp->tsk_status;
 
@@ -3556,12 +3185,6 @@ bfa_tskim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 }
 
 
-
-/*
- *  hal_tskim_api
- */
-
-
 struct bfa_tskim_s *
 bfa_tskim_alloc(struct bfa_s *bfa, struct bfad_tskim_s *dtsk)
 {
@@ -3579,13 +3202,13 @@ bfa_tskim_alloc(struct bfa_s *bfa, struct bfad_tskim_s *dtsk)
 void
 bfa_tskim_free(struct bfa_tskim_s *tskim)
 {
-	bfa_assert(bfa_q_is_on_q_func(&tskim->itnim->tsk_q, &tskim->qe));
+	WARN_ON(!bfa_q_is_on_q_func(&tskim->itnim->tsk_q, &tskim->qe));
 	list_del(&tskim->qe);
 	list_add_tail(&tskim->qe, &tskim->fcpim->tskim_free_q);
 }
 
 /*
- *	Start a task management command.
+ * Start a task management command.
  *
  * @param[in]	tskim	BFA task management command instance
  * @param[in]	itnim	i-t nexus for the task management command
@@ -3596,7 +3219,8 @@ bfa_tskim_free(struct bfa_tskim_s *tskim)
  * @return None.
  */
 void
-bfa_tskim_start(struct bfa_tskim_s *tskim, struct bfa_itnim_s *itnim, lun_t lun,
+bfa_tskim_start(struct bfa_tskim_s *tskim, struct bfa_itnim_s *itnim,
+			struct scsi_lun lun,
 			enum fcp_tm_cmnd tm_cmnd, u8 tsecs)
 {
 	tskim->itnim	= itnim;
diff --git a/drivers/scsi/bfa/bfa_fcpim.h b/drivers/scsi/bfa/bfa_fcpim.h
index db53717eeb4..1e38dade842 100644
--- a/drivers/scsi/bfa/bfa_fcpim.h
+++ b/drivers/scsi/bfa/bfa_fcpim.h
@@ -41,7 +41,7 @@
 	(__itnim->ioprofile.iocomps[__index]++)
 
 #define BFA_IOIM_RETRY_TAG_OFFSET 11
-#define BFA_IOIM_RETRY_TAG_MASK 0x07ff /* 2K IOs */
+#define BFA_IOIM_IOTAG_MASK 0x07ff /* 2K IOs */
 #define BFA_IOIM_RETRY_MAX 7
 
 /* Buckets are are 512 bytes to 2MB */
@@ -94,12 +94,12 @@ struct bfa_fcpim_mod_s {
 	struct list_head	ioim_resfree_q; /*  IOs waiting for f/w */
 	struct list_head	ioim_comp_q;	/*  IO global comp Q	*/
 	struct list_head	tskim_free_q;
-	u32		ios_active;	/*  current active IOs	*/
-	u32		delay_comp;
+	u32			ios_active;	/*  current active IOs	*/
+	u32			delay_comp;
 	struct bfa_fcpim_del_itn_stats_s del_itn_stats;
 	bfa_boolean_t		ioredirect;
 	bfa_boolean_t		io_profile;
-	u32		io_profile_start_time;
+	u32			io_profile_start_time;
 	bfa_fcpim_profile_t     profile_comp;
 	bfa_fcpim_profile_t     profile_start;
 };
@@ -114,25 +114,24 @@ struct bfa_ioim_s {
 	struct bfa_fcpim_mod_s	*fcpim;		/*  parent fcpim module */
 	struct bfa_itnim_s	*itnim;		/*  i-t-n nexus for this IO  */
 	struct bfad_ioim_s	*dio;		/*  driver IO handle	*/
-	u16		iotag;		/*  FWI IO tag	*/
-	u16		abort_tag;	/*  unqiue abort request tag */
-	u16		nsges;		/*  number of SG elements */
-	u16		nsgpgs;		/*  number of SG pages	*/
+	u16			iotag;		/*  FWI IO tag	*/
+	u16			abort_tag;	/*  unqiue abort request tag */
+	u16			nsges;		/*  number of SG elements */
+	u16			nsgpgs;		/*  number of SG pages	*/
 	struct bfa_sgpg_s	*sgpg;		/*  first SG page	*/
 	struct list_head	sgpg_q;		/*  allocated SG pages	*/
 	struct bfa_cb_qe_s	hcb_qe;		/*  bfa callback qelem	*/
 	bfa_cb_cbfn_t		io_cbfn;	/*  IO completion handler */
-	struct bfa_ioim_sp_s *iosp;		/*  slow-path IO handling */
-	u8		reqq;		/*  Request queue for I/O */
-	u64 start_time;			/*  IO's Profile start val */
+	struct bfa_ioim_sp_s	*iosp;		/*  slow-path IO handling */
+	u8			reqq;		/*  Request queue for I/O */
+	u64			start_time;	/*  IO's Profile start val */
 };
 
-
 struct bfa_ioim_sp_s {
 	struct bfi_msg_s	comp_rspmsg;	/*  IO comp f/w response */
 	u8			*snsinfo;	/*  sense info for this IO   */
-	struct bfa_sgpg_wqe_s sgpg_wqe;	/*  waitq elem for sgpg	*/
-	struct bfa_reqq_wait_s reqq_wait;	/*  to wait for room in reqq */
+	struct bfa_sgpg_wqe_s	sgpg_wqe;	/*  waitq elem for sgpg	*/
+	struct bfa_reqq_wait_s	reqq_wait;	/*  to wait for room in reqq */
 	bfa_boolean_t		abort_explicit;	/*  aborted by OS	*/
 	struct bfa_tskim_s	*tskim;		/*  Relevant TM cmd	*/
 };
@@ -143,35 +142,34 @@ struct bfa_ioim_sp_s {
 struct bfa_tskim_s {
 	struct list_head	qe;
 	bfa_sm_t		sm;
-	struct bfa_s	*bfa;	/*  BFA module  */
+	struct bfa_s		*bfa;	/*  BFA module  */
 	struct bfa_fcpim_mod_s  *fcpim;	/*  parent fcpim module	*/
 	struct bfa_itnim_s	*itnim;	/*  i-t-n nexus for this IO  */
-	struct bfad_tskim_s	*dtsk;   /*  driver task mgmt cmnd	*/
-	bfa_boolean_t	notify;	/*  notify itnim on TM comp  */
-	lun_t	lun;	/*  lun if applicable	*/
-	enum fcp_tm_cmnd	tm_cmnd;	/*  task management command  */
-	u16	tsk_tag;	/*  FWI IO tag	*/
-	u8	tsecs;	/*  timeout in seconds	*/
+	struct bfad_tskim_s	*dtsk;  /*  driver task mgmt cmnd	*/
+	bfa_boolean_t		notify;	/*  notify itnim on TM comp  */
+	struct scsi_lun		lun;	/*  lun if applicable	*/
+	enum fcp_tm_cmnd	tm_cmnd; /*  task management command  */
+	u16			tsk_tag; /*  FWI IO tag	*/
+	u8			tsecs;	/*  timeout in seconds	*/
 	struct bfa_reqq_wait_s  reqq_wait;   /*  to wait for room in reqq */
 	struct list_head	io_q;	/*  queue of affected IOs	*/
-	struct bfa_wc_s	wc;	/*  waiting counter	*/
+	struct bfa_wc_s		wc;	/*  waiting counter	*/
 	struct bfa_cb_qe_s	hcb_qe;	/*  bfa callback qelem	*/
 	enum bfi_tskim_status   tsk_status;  /*  TM status	*/
 };
 
-
 /*
  * BFA i-t-n (initiator mode)
  */
 struct bfa_itnim_s {
-	struct list_head	qe;		/*  queue element	*/
-	bfa_sm_t	  sm;		/*  i-t-n im BFA state machine  */
-	struct bfa_s	*bfa;		/*  bfa instance	*/
-	struct bfa_rport_s *rport;	/*  bfa rport	*/
-	void	*ditn;		/*  driver i-t-n structure	*/
+	struct list_head	qe;	/*  queue element	*/
+	bfa_sm_t		sm;	/*  i-t-n im BFA state machine  */
+	struct bfa_s		*bfa;	/*  bfa instance	*/
+	struct bfa_rport_s	*rport;	/*  bfa rport	*/
+	void			*ditn;	/*  driver i-t-n structure	*/
 	struct bfi_mhdr_s	mhdr;	/*  pre-built mhdr	*/
-	u8	msg_no;		/*  itnim/rport firmware handle */
-	u8	reqq;		/*  CQ for requests	*/
+	u8			msg_no;	/*  itnim/rport firmware handle */
+	u8			reqq;	/*  CQ for requests	*/
 	struct bfa_cb_qe_s	hcb_qe;	/*  bfa callback qelem	*/
 	struct list_head pending_q;	/*  queue of pending IO requests */
 	struct list_head io_q;		/*  queue of active IO requests */
@@ -181,19 +179,19 @@ struct bfa_itnim_s {
 	bfa_boolean_t   seq_rec;	/*  SQER supported	*/
 	bfa_boolean_t   is_online;	/*  itnim is ONLINE for IO	*/
 	bfa_boolean_t   iotov_active;	/*  IO TOV timer is active	 */
-	struct bfa_wc_s	wc;	/*  waiting counter	*/
-	struct bfa_timer_s timer;	/*  pending IO TOV		 */
+	struct bfa_wc_s	wc;		/*  waiting counter	*/
+	struct bfa_timer_s timer;	/*  pending IO TOV	 */
 	struct bfa_reqq_wait_s reqq_wait; /*  to wait for room in reqq */
 	struct bfa_fcpim_mod_s *fcpim;	/*  fcpim module	*/
 	struct bfa_itnim_iostats_s	stats;
 	struct bfa_itnim_ioprofile_s  ioprofile;
 };
 
-
 #define bfa_itnim_is_online(_itnim) ((_itnim)->is_online)
 #define BFA_FCPIM_MOD(_hal) (&(_hal)->modules.fcpim_mod)
+#define BFA_IOIM_TAG_2_ID(_iotag)	((_iotag) & BFA_IOIM_IOTAG_MASK)
 #define BFA_IOIM_FROM_TAG(_fcpim, _iotag)	\
-	(&fcpim->ioim_arr[(_iotag & BFA_IOIM_RETRY_TAG_MASK)])
+	(&fcpim->ioim_arr[(_iotag & BFA_IOIM_IOTAG_MASK)])
 #define BFA_TSKIM_FROM_TAG(_fcpim, _tmtag)	\
 	(&fcpim->tskim_arr[_tmtag & (fcpim->num_tskim_reqs - 1)])
 
@@ -201,26 +199,26 @@ struct bfa_itnim_s {
 	(_bfa->modules.fcpim_mod.io_profile_start_time)
 #define bfa_fcpim_get_io_profile(_bfa)	\
 	(_bfa->modules.fcpim_mod.io_profile)
+#define bfa_ioim_update_iotag(__ioim) do {				\
+	uint16_t k = (__ioim)->iotag >> BFA_IOIM_RETRY_TAG_OFFSET;	\
+	k++; (__ioim)->iotag &= BFA_IOIM_IOTAG_MASK;			\
+	(__ioim)->iotag |= k << BFA_IOIM_RETRY_TAG_OFFSET;		\
+} while (0)
 
 static inline bfa_boolean_t
-bfa_ioim_get_iotag(struct bfa_ioim_s *ioim)
+bfa_ioim_maxretry_reached(struct bfa_ioim_s *ioim)
 {
-	u16 k = ioim->iotag;
-
-	k >>= BFA_IOIM_RETRY_TAG_OFFSET; k++;
-
-	if (k > BFA_IOIM_RETRY_MAX)
+	uint16_t k = ioim->iotag >> BFA_IOIM_RETRY_TAG_OFFSET;
+	if (k < BFA_IOIM_RETRY_MAX)
 		return BFA_FALSE;
-	ioim->iotag &= BFA_IOIM_RETRY_TAG_MASK;
-	ioim->iotag |= k<<BFA_IOIM_RETRY_TAG_OFFSET;
 	return BFA_TRUE;
 }
+
 /*
  * function prototypes
  */
 void	bfa_ioim_attach(struct bfa_fcpim_mod_s *fcpim,
 					struct bfa_meminfo_s *minfo);
-void	bfa_ioim_detach(struct bfa_fcpim_mod_s *fcpim);
 void	bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
 void	bfa_ioim_good_comp_isr(struct bfa_s *bfa,
 					struct bfi_msg_s *msg);
@@ -232,7 +230,6 @@ void	bfa_ioim_tov(struct bfa_ioim_s *ioim);
 
 void	bfa_tskim_attach(struct bfa_fcpim_mod_s *fcpim,
 					struct bfa_meminfo_s *minfo);
-void	bfa_tskim_detach(struct bfa_fcpim_mod_s *fcpim);
 void	bfa_tskim_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
 void	bfa_tskim_iodone(struct bfa_tskim_s *tskim);
 void	bfa_tskim_iocdisable(struct bfa_tskim_s *tskim);
@@ -248,32 +245,14 @@ void	bfa_itnim_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
 void	bfa_itnim_iodone(struct bfa_itnim_s *itnim);
 void	bfa_itnim_tskdone(struct bfa_itnim_s *itnim);
 bfa_boolean_t   bfa_itnim_hold_io(struct bfa_itnim_s *itnim);
-void bfa_ioim_profile_comp(struct bfa_ioim_s *ioim);
-void bfa_ioim_profile_start(struct bfa_ioim_s *ioim);
-
 
 /*
  * bfa fcpim module API functions
  */
-void		bfa_fcpim_path_tov_set(struct bfa_s *bfa, u16 path_tov);
+void	bfa_fcpim_path_tov_set(struct bfa_s *bfa, u16 path_tov);
 u16	bfa_fcpim_path_tov_get(struct bfa_s *bfa);
-void		bfa_fcpim_qdepth_set(struct bfa_s *bfa, u16 q_depth);
 u16	bfa_fcpim_qdepth_get(struct bfa_s *bfa);
-bfa_status_t bfa_fcpim_get_modstats(struct bfa_s *bfa,
-	 struct bfa_itnim_iostats_s *modstats);
-bfa_status_t bfa_fcpim_port_iostats(struct bfa_s *bfa,
-		struct bfa_itnim_iostats_s *stats, u8 lp_tag);
-bfa_status_t bfa_fcpim_get_del_itn_stats(struct bfa_s *bfa,
-	 struct bfa_fcpim_del_itn_stats_s *modstats);
-bfa_status_t bfa_fcpim_port_clear_iostats(struct bfa_s *bfa, u8 lp_tag);
-void bfa_fcpim_add_stats(struct bfa_itnim_iostats_s *fcpim_stats,
-		struct bfa_itnim_iostats_s *itnim_stats);
-bfa_status_t bfa_fcpim_clr_modstats(struct bfa_s *bfa);
-void		bfa_fcpim_set_ioredirect(struct bfa_s *bfa,
-				bfa_boolean_t state);
-void		bfa_fcpim_update_ioredirect(struct bfa_s *bfa);
-bfa_status_t bfa_fcpim_profile_on(struct bfa_s *bfa, u32 time);
-bfa_status_t bfa_fcpim_profile_off(struct bfa_s *bfa);
+
 #define bfa_fcpim_ioredirect_enabled(__bfa)				\
 	(((struct bfa_fcpim_mod_s *)(BFA_FCPIM_MOD(__bfa)))->ioredirect)
 
@@ -291,48 +270,33 @@ bfa_status_t bfa_fcpim_profile_off(struct bfa_s *bfa);
  * bfa itnim API functions
  */
 struct bfa_itnim_s *bfa_itnim_create(struct bfa_s *bfa,
-					struct bfa_rport_s *rport, void *itnim);
-void		bfa_itnim_delete(struct bfa_itnim_s *itnim);
-void		bfa_itnim_online(struct bfa_itnim_s *itnim,
-				 bfa_boolean_t seq_rec);
-void		bfa_itnim_offline(struct bfa_itnim_s *itnim);
-void		bfa_itnim_get_stats(struct bfa_itnim_s *itnim,
-			struct bfa_itnim_iostats_s *stats);
-void		bfa_itnim_clear_stats(struct bfa_itnim_s *itnim);
-bfa_status_t	bfa_itnim_get_ioprofile(struct bfa_itnim_s *itnim,
-		struct bfa_itnim_ioprofile_s *ioprofile);
+		struct bfa_rport_s *rport, void *itnim);
+void bfa_itnim_delete(struct bfa_itnim_s *itnim);
+void bfa_itnim_online(struct bfa_itnim_s *itnim, bfa_boolean_t seq_rec);
+void bfa_itnim_offline(struct bfa_itnim_s *itnim);
+void bfa_itnim_clear_stats(struct bfa_itnim_s *itnim);
+bfa_status_t bfa_itnim_get_ioprofile(struct bfa_itnim_s *itnim,
+			struct bfa_itnim_ioprofile_s *ioprofile);
+
 #define bfa_itnim_get_reqq(__ioim) (((struct bfa_ioim_s *)__ioim)->itnim->reqq)
 
 /*
- *	BFA completion callback for bfa_itnim_online().
- *
- * @param[in]		itnim		FCS or driver itnim instance
- *
- * return None
+ * BFA completion callback for bfa_itnim_online().
  */
 void	bfa_cb_itnim_online(void *itnim);
 
 /*
- *	BFA completion callback for bfa_itnim_offline().
- *
- * @param[in]		itnim		FCS or driver itnim instance
- *
- * return None
+ * BFA completion callback for bfa_itnim_offline().
  */
 void	bfa_cb_itnim_offline(void *itnim);
 void	bfa_cb_itnim_tov_begin(void *itnim);
 void	bfa_cb_itnim_tov(void *itnim);
 
 /*
- *	BFA notification to FCS/driver for second level error recovery.
- *
+ * BFA notification to FCS/driver for second level error recovery.
  * Atleast one I/O request has timedout and target is unresponsive to
  * repeated abort requests. Second level error recovery should be initiated
  * by starting implicit logout and recovery procedures.
- *
- * @param[in]		itnim		FCS or driver itnim instance
- *
- * return None
  */
 void	bfa_cb_itnim_sler(void *itnim);
 
@@ -349,10 +313,8 @@ void		bfa_ioim_start(struct bfa_ioim_s *ioim);
 bfa_status_t	bfa_ioim_abort(struct bfa_ioim_s *ioim);
 void		bfa_ioim_delayed_comp(struct bfa_ioim_s *ioim,
 				      bfa_boolean_t iotov);
-
-
 /*
- *	I/O completion notification.
+ * I/O completion notification.
  *
  * @param[in]		dio			driver IO structure
  * @param[in]		io_status		IO completion status
@@ -363,39 +325,31 @@ void		bfa_ioim_delayed_comp(struct bfa_ioim_s *ioim,
  *
  * @return None
  */
-void	bfa_cb_ioim_done(void *bfad, struct bfad_ioim_s *dio,
-				  enum bfi_ioim_status io_status,
-				  u8 scsi_status, int sns_len,
-				  u8 *sns_info, s32 residue);
+void bfa_cb_ioim_done(void *bfad, struct bfad_ioim_s *dio,
+			enum bfi_ioim_status io_status,
+			u8 scsi_status, int sns_len,
+			u8 *sns_info, s32 residue);
 
 /*
- *	I/O good completion notification.
- *
- * @param[in]		dio			driver IO structure
- *
- * @return None
+ * I/O good completion notification.
  */
-void	bfa_cb_ioim_good_comp(void *bfad, struct bfad_ioim_s *dio);
+void bfa_cb_ioim_good_comp(void *bfad, struct bfad_ioim_s *dio);
 
 /*
- *	I/O abort completion notification
- *
- * @param[in]		dio			driver IO that was aborted
- *
- * @return None
+ * I/O abort completion notification
  */
-void	bfa_cb_ioim_abort(void *bfad, struct bfad_ioim_s *dio);
+void bfa_cb_ioim_abort(void *bfad, struct bfad_ioim_s *dio);
 
 /*
  * bfa tskim API functions
  */
-struct bfa_tskim_s	*bfa_tskim_alloc(struct bfa_s *bfa,
-					struct bfad_tskim_s *dtsk);
-void		bfa_tskim_free(struct bfa_tskim_s *tskim);
-void		bfa_tskim_start(struct bfa_tskim_s *tskim,
-				struct bfa_itnim_s *itnim, lun_t lun,
-				enum fcp_tm_cmnd tm, u8 t_secs);
-void		bfa_cb_tskim_done(void *bfad, struct bfad_tskim_s *dtsk,
-				  enum bfi_tskim_status tsk_status);
+struct bfa_tskim_s *bfa_tskim_alloc(struct bfa_s *bfa,
+			struct bfad_tskim_s *dtsk);
+void bfa_tskim_free(struct bfa_tskim_s *tskim);
+void bfa_tskim_start(struct bfa_tskim_s *tskim,
+			struct bfa_itnim_s *itnim, struct scsi_lun lun,
+			enum fcp_tm_cmnd tm, u8 t_secs);
+void bfa_cb_tskim_done(void *bfad, struct bfad_tskim_s *dtsk,
+			enum bfi_tskim_status tsk_status);
 
 #endif /* __BFA_FCPIM_H__ */
diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c
index c94502dfac6..f674f931862 100644
--- a/drivers/scsi/bfa/bfa_fcs.c
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -19,9 +19,9 @@
  *  bfa_fcs.c BFA FCS main
  */
 
+#include "bfad_drv.h"
 #include "bfa_fcs.h"
 #include "bfa_fcbuild.h"
-#include "bfad_drv.h"
 
 BFA_TRC_FILE(FCS, FCS);
 
@@ -76,7 +76,7 @@ bfa_fcs_attach(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
 	fcs->bfad = bfad;
 	fcs->min_cfg = min_cfg;
 
-	bfa_attach_fcs(bfa);
+	bfa->fcs = BFA_TRUE;
 	fcbuild_init();
 
 	for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) {
@@ -110,14 +110,6 @@ bfa_fcs_init(struct bfa_fcs_s *fcs)
 	}
 }
 
-/*
- * Start FCS operations.
- */
-void
-bfa_fcs_start(struct bfa_fcs_s *fcs)
-{
-	bfa_fcs_fabric_modstart(fcs);
-}
 
 /*
  *	brief
@@ -140,22 +132,6 @@ bfa_fcs_driver_info_init(struct bfa_fcs_s *fcs,
 
 /*
  *	brief
- *		FCS FDMI Driver Parameter Initialization
- *
- *	param[in]		fcs		FCS instance
- *	param[in]		fdmi_enable	TRUE/FALSE
- *
- *	return None
- */
-void
-bfa_fcs_set_fdmi_param(struct bfa_fcs_s *fcs, bfa_boolean_t fdmi_enable)
-{
-
-	fcs->fdmi_enabled = fdmi_enable;
-
-}
-/*
- *	brief
  *		FCS instance cleanup and exit.
  *
  *	param[in]		fcs			FCS instance
@@ -184,18 +160,6 @@ bfa_fcs_exit(struct bfa_fcs_s *fcs)
 }
 
 
-void
-bfa_fcs_trc_init(struct bfa_fcs_s *fcs, struct bfa_trc_mod_s *trcmod)
-{
-	fcs->trcmod = trcmod;
-}
-
-void
-bfa_fcs_modexit_comp(struct bfa_fcs_s *fcs)
-{
-	bfa_wc_down(&fcs->wc);
-}
-
 /*
  * Fabric module implementation.
  */
@@ -232,31 +196,6 @@ static void bfa_fcs_fabric_flogiacc_comp(void *fcsarg,
 					 u32 rsp_len,
 					 u32 resid_len,
 					 struct fchs_s *rspfchs);
-/*
- *  fcs_fabric_sm fabric state machine functions
- */
-
-/*
- * Fabric state machine events
- */
-enum bfa_fcs_fabric_event {
-	BFA_FCS_FABRIC_SM_CREATE	= 1,	/*  create from driver	      */
-	BFA_FCS_FABRIC_SM_DELETE	= 2,	/*  delete from driver	      */
-	BFA_FCS_FABRIC_SM_LINK_DOWN	= 3,	/*  link down from port      */
-	BFA_FCS_FABRIC_SM_LINK_UP	= 4,	/*  link up from port	      */
-	BFA_FCS_FABRIC_SM_CONT_OP	= 5,	/*  flogi/auth continue op   */
-	BFA_FCS_FABRIC_SM_RETRY_OP	= 6,	/*  flogi/auth retry op      */
-	BFA_FCS_FABRIC_SM_NO_FABRIC	= 7,	/*  from flogi/auth	      */
-	BFA_FCS_FABRIC_SM_PERF_EVFP	= 8,	/*  from flogi/auth	      */
-	BFA_FCS_FABRIC_SM_ISOLATE	= 9,	/*  from EVFP processing     */
-	BFA_FCS_FABRIC_SM_NO_TAGGING	= 10,	/*  no VFT tagging from EVFP */
-	BFA_FCS_FABRIC_SM_DELAYED	= 11,	/*  timeout delay event      */
-	BFA_FCS_FABRIC_SM_AUTH_FAILED	= 12,	/*  auth failed	      */
-	BFA_FCS_FABRIC_SM_AUTH_SUCCESS	= 13,	/*  auth successful	      */
-	BFA_FCS_FABRIC_SM_DELCOMP	= 14,	/*  all vports deleted event */
-	BFA_FCS_FABRIC_SM_LOOPBACK	= 15,	/*  Received our own FLOGI   */
-	BFA_FCS_FABRIC_SM_START		= 16,	/*  from driver	      */
-};
 
 static void	bfa_fcs_fabric_sm_uninit(struct bfa_fcs_fabric_s *fabric,
 					 enum bfa_fcs_fabric_event event);
@@ -270,14 +209,8 @@ static void	bfa_fcs_fabric_sm_flogi_retry(struct bfa_fcs_fabric_s *fabric,
 					      enum bfa_fcs_fabric_event event);
 static void	bfa_fcs_fabric_sm_auth(struct bfa_fcs_fabric_s *fabric,
 				       enum bfa_fcs_fabric_event event);
-static void	bfa_fcs_fabric_sm_auth_failed(struct bfa_fcs_fabric_s *fabric,
-					      enum bfa_fcs_fabric_event event);
-static void	bfa_fcs_fabric_sm_loopback(struct bfa_fcs_fabric_s *fabric,
-					   enum bfa_fcs_fabric_event event);
 static void	bfa_fcs_fabric_sm_nofabric(struct bfa_fcs_fabric_s *fabric,
 					   enum bfa_fcs_fabric_event event);
-static void	bfa_fcs_fabric_sm_online(struct bfa_fcs_fabric_s *fabric,
-					 enum bfa_fcs_fabric_event event);
 static void	bfa_fcs_fabric_sm_evfp(struct bfa_fcs_fabric_s *fabric,
 				       enum bfa_fcs_fabric_event event);
 static void	bfa_fcs_fabric_sm_evfp_done(struct bfa_fcs_fabric_s *fabric,
@@ -337,7 +270,7 @@ bfa_fcs_fabric_sm_created(struct bfa_fcs_fabric_s *fabric,
 
 	case BFA_FCS_FABRIC_SM_DELETE:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_uninit);
-		bfa_fcs_modexit_comp(fabric->fcs);
+		bfa_wc_down(&fabric->fcs->wc);
 		break;
 
 	default:
@@ -410,7 +343,7 @@ bfa_fcs_fabric_sm_flogi(struct bfa_fcs_fabric_s *fabric,
 
 	case BFA_FCS_FABRIC_SM_LOOPBACK:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_loopback);
-		bfa_lps_discard(fabric->lps);
+		bfa_sm_send_event(fabric->lps, BFA_LPS_SM_OFFLINE);
 		bfa_fcs_fabric_set_opertype(fabric);
 		break;
 
@@ -424,12 +357,12 @@ bfa_fcs_fabric_sm_flogi(struct bfa_fcs_fabric_s *fabric,
 
 	case BFA_FCS_FABRIC_SM_LINK_DOWN:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
-		bfa_lps_discard(fabric->lps);
+		bfa_sm_send_event(fabric->lps, BFA_LPS_SM_OFFLINE);
 		break;
 
 	case BFA_FCS_FABRIC_SM_DELETE:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
-		bfa_lps_discard(fabric->lps);
+		bfa_sm_send_event(fabric->lps, BFA_LPS_SM_OFFLINE);
 		bfa_fcs_fabric_delete(fabric);
 		break;
 
@@ -481,7 +414,7 @@ bfa_fcs_fabric_sm_auth(struct bfa_fcs_fabric_s *fabric,
 	switch (event) {
 	case BFA_FCS_FABRIC_SM_AUTH_FAILED:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_auth_failed);
-		bfa_lps_discard(fabric->lps);
+		bfa_sm_send_event(fabric->lps, BFA_LPS_SM_OFFLINE);
 		break;
 
 	case BFA_FCS_FABRIC_SM_AUTH_SUCCESS:
@@ -495,7 +428,7 @@ bfa_fcs_fabric_sm_auth(struct bfa_fcs_fabric_s *fabric,
 
 	case BFA_FCS_FABRIC_SM_LINK_DOWN:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
-		bfa_lps_discard(fabric->lps);
+		bfa_sm_send_event(fabric->lps, BFA_LPS_SM_OFFLINE);
 		break;
 
 	case BFA_FCS_FABRIC_SM_DELETE:
@@ -511,7 +444,7 @@ bfa_fcs_fabric_sm_auth(struct bfa_fcs_fabric_s *fabric,
 /*
  *   Authentication failed
  */
-static void
+void
 bfa_fcs_fabric_sm_auth_failed(struct bfa_fcs_fabric_s *fabric,
 			      enum bfa_fcs_fabric_event event)
 {
@@ -537,7 +470,7 @@ bfa_fcs_fabric_sm_auth_failed(struct bfa_fcs_fabric_s *fabric,
 /*
  *   Port is in loopback mode.
  */
-static void
+void
 bfa_fcs_fabric_sm_loopback(struct bfa_fcs_fabric_s *fabric,
 			   enum bfa_fcs_fabric_event event)
 {
@@ -573,7 +506,7 @@ bfa_fcs_fabric_sm_nofabric(struct bfa_fcs_fabric_s *fabric,
 	switch (event) {
 	case BFA_FCS_FABRIC_SM_LINK_DOWN:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
-		bfa_lps_discard(fabric->lps);
+		bfa_sm_send_event(fabric->lps, BFA_LPS_SM_OFFLINE);
 		bfa_fcs_fabric_notify_offline(fabric);
 		break;
 
@@ -596,7 +529,7 @@ bfa_fcs_fabric_sm_nofabric(struct bfa_fcs_fabric_s *fabric,
 /*
  *   Fabric is online - normal operating state.
  */
-static void
+void
 bfa_fcs_fabric_sm_online(struct bfa_fcs_fabric_s *fabric,
 			 enum bfa_fcs_fabric_event event)
 {
@@ -606,7 +539,7 @@ bfa_fcs_fabric_sm_online(struct bfa_fcs_fabric_s *fabric,
 	switch (event) {
 	case BFA_FCS_FABRIC_SM_LINK_DOWN:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
-		bfa_lps_discard(fabric->lps);
+		bfa_sm_send_event(fabric->lps, BFA_LPS_SM_OFFLINE);
 		bfa_fcs_fabric_notify_offline(fabric);
 		break;
 
@@ -617,7 +550,7 @@ bfa_fcs_fabric_sm_online(struct bfa_fcs_fabric_s *fabric,
 
 	case BFA_FCS_FABRIC_SM_AUTH_FAILED:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_auth_failed);
-		bfa_lps_discard(fabric->lps);
+		bfa_sm_send_event(fabric->lps, BFA_LPS_SM_OFFLINE);
 		break;
 
 	case BFA_FCS_FABRIC_SM_AUTH_SUCCESS:
@@ -677,7 +610,7 @@ bfa_fcs_fabric_sm_isolated(struct bfa_fcs_fabric_s *fabric,
 	bfa_trc(fabric->fcs, event);
 	wwn2str(pwwn_ptr, fabric->bport.port_cfg.pwwn);
 
-	BFA_LOG(KERN_INFO, bfad, log_level,
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 		"Port is isolated due to VF_ID mismatch. "
 		"PWWN: %s Port VF_ID: %04x switch port VF_ID: %04x.",
 		pwwn_ptr, fabric->fcs->port_vfid,
@@ -697,7 +630,7 @@ bfa_fcs_fabric_sm_deleting(struct bfa_fcs_fabric_s *fabric,
 	switch (event) {
 	case BFA_FCS_FABRIC_SM_DELCOMP:
 		bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_uninit);
-		bfa_fcs_modexit_comp(fabric->fcs);
+		bfa_wc_down(&fabric->fcs->wc);
 		break;
 
 	case BFA_FCS_FABRIC_SM_LINK_UP:
@@ -724,8 +657,8 @@ bfa_fcs_fabric_init(struct bfa_fcs_fabric_s *fabric)
 	struct bfa_lport_cfg_s *port_cfg = &fabric->bport.port_cfg;
 
 	port_cfg->roles = BFA_LPORT_ROLE_FCP_IM;
-	port_cfg->nwwn = bfa_ioc_get_nwwn(&fabric->fcs->bfa->ioc);
-	port_cfg->pwwn = bfa_ioc_get_pwwn(&fabric->fcs->bfa->ioc);
+	port_cfg->nwwn = fabric->fcs->bfa->ioc.attr->nwwn;
+	port_cfg->pwwn = fabric->fcs->bfa->ioc.attr->pwwn;
 }
 
 /*
@@ -813,7 +746,7 @@ bfa_cb_lps_flogi_comp(void *bfad, void *uarg, bfa_status_t status)
 		return;
 
 	case BFA_STATUS_EPROTOCOL:
-		switch (bfa_lps_get_extstatus(fabric->lps)) {
+		switch (fabric->lps->ext_status) {
 		case BFA_EPROTO_BAD_ACCEPT:
 			fabric->stats.flogi_acc_err++;
 			break;
@@ -840,26 +773,26 @@ bfa_cb_lps_flogi_comp(void *bfad, void *uarg, bfa_status_t status)
 		return;
 	}
 
-	fabric->bb_credit = bfa_lps_get_peer_bbcredit(fabric->lps);
+	fabric->bb_credit = fabric->lps->pr_bbcred;
 	bfa_trc(fabric->fcs, fabric->bb_credit);
 
-	if (!bfa_lps_is_brcd_fabric(fabric->lps))
-		fabric->fabric_name =  bfa_lps_get_peer_nwwn(fabric->lps);
+	if (!(fabric->lps->brcd_switch))
+		fabric->fabric_name =  fabric->lps->pr_nwwn;
 
 	/*
 	 * Check port type. It should be 1 = F-port.
 	 */
-	if (bfa_lps_is_fport(fabric->lps)) {
-		fabric->bport.pid = bfa_lps_get_pid(fabric->lps);
-		fabric->is_npiv = bfa_lps_is_npiv_en(fabric->lps);
-		fabric->is_auth = bfa_lps_is_authreq(fabric->lps);
+	if (fabric->lps->fport) {
+		fabric->bport.pid = fabric->lps->lp_pid;
+		fabric->is_npiv = fabric->lps->npiv_en;
+		fabric->is_auth = fabric->lps->auth_req;
 		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_CONT_OP);
 	} else {
 		/*
 		 * Nport-2-Nport direct attached
 		 */
 		fabric->bport.port_topo.pn2n.rem_port_wwn =
-			bfa_lps_get_peer_pwwn(fabric->lps);
+			fabric->lps->pr_pwwn;
 		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_NO_FABRIC);
 	}
 
@@ -987,7 +920,7 @@ bfa_fcs_fabric_attach(struct bfa_fcs_s *fcs)
 	INIT_LIST_HEAD(&fabric->vport_q);
 	INIT_LIST_HEAD(&fabric->vf_q);
 	fabric->lps = bfa_lps_alloc(fcs->bfa);
-	bfa_assert(fabric->lps);
+	WARN_ON(!fabric->lps);
 
 	/*
 	 * Initialize fabric delete completion handler. Fabric deletion is
@@ -1038,31 +971,6 @@ bfa_fcs_fabric_modstart(struct bfa_fcs_s *fcs)
 	bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_START);
 }
 
-/*
- *   Suspend fabric activity as part of driver suspend.
- */
-void
-bfa_fcs_fabric_modsusp(struct bfa_fcs_s *fcs)
-{
-}
-
-bfa_boolean_t
-bfa_fcs_fabric_is_loopback(struct bfa_fcs_fabric_s *fabric)
-{
-	return bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_loopback);
-}
-
-bfa_boolean_t
-bfa_fcs_fabric_is_auth_failed(struct bfa_fcs_fabric_s *fabric)
-{
-	return bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_auth_failed);
-}
-
-enum bfa_port_type
-bfa_fcs_fabric_port_type(struct bfa_fcs_fabric_s *fabric)
-{
-	return fabric->oper_type;
-}
 
 /*
  *   Link up notification from BFA physical port module.
@@ -1123,40 +1031,6 @@ bfa_fcs_fabric_delvport(struct bfa_fcs_fabric_s *fabric,
 	bfa_wc_down(&fabric->wc);
 }
 
-/*
- *   Base port is deleted.
- */
-void
-bfa_fcs_fabric_port_delete_comp(struct bfa_fcs_fabric_s *fabric)
-{
-	bfa_wc_down(&fabric->wc);
-}
-
-
-/*
- *    Check if fabric is online.
- *
- *   param[in] fabric - Fabric instance. This can be a base fabric or vf.
- *
- *   @return  TRUE/FALSE
- */
-int
-bfa_fcs_fabric_is_online(struct bfa_fcs_fabric_s *fabric)
-{
-	return bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_online);
-}
-
-/*
- *	brief
- *
- */
-bfa_status_t
-bfa_fcs_fabric_addvf(struct bfa_fcs_fabric_s *vf, struct bfa_fcs_s *fcs,
-		     struct bfa_lport_cfg_s *port_cfg, struct bfad_vf_s *vf_drv)
-{
-	bfa_sm_set_state(vf, bfa_fcs_fabric_sm_uninit);
-	return BFA_STATUS_OK;
-}
 
 /*
  * Lookup for a vport withing a fabric given its pwwn
@@ -1176,18 +1050,6 @@ bfa_fcs_fabric_vport_lookup(struct bfa_fcs_fabric_s *fabric, wwn_t pwwn)
 	return NULL;
 }
 
-/*
- *    In a given fabric, return the number of lports.
- *
- *   param[in] fabric - Fabric instance. This can be a base fabric or vf.
- *
- *   @return : 1 or more.
- */
-u16
-bfa_fcs_fabric_vport_count(struct bfa_fcs_fabric_s *fabric)
-{
-	return fabric->num_vports;
-}
 
 /*
  *  Get OUI of the attached switch.
@@ -1207,7 +1069,7 @@ bfa_fcs_fabric_get_switch_oui(struct bfa_fcs_fabric_s *fabric)
 	u8 *tmp;
 	u16 oui;
 
-	fab_nwwn = bfa_lps_get_peer_nwwn(fabric->lps);
+	fab_nwwn = fabric->lps->pr_nwwn;
 
 	tmp = (u8 *)&fab_nwwn;
 	oui = (tmp[3] << 8) | tmp[4];
@@ -1235,7 +1097,7 @@ bfa_fcs_fabric_uf_recv(struct bfa_fcs_fabric_s *fabric, struct fchs_s *fchs,
 	 * external loopback cable is in place. Our own FLOGI frames are
 	 * sometimes looped back when switch port gets temporarily bypassed.
 	 */
-	if ((pid == bfa_os_ntoh3b(FC_FABRIC_PORT)) &&
+	if ((pid == bfa_ntoh3b(FC_FABRIC_PORT)) &&
 	    (els_cmd->els_code == FC_ELS_FLOGI) &&
 	    (flogi->port_name == bfa_fcs_lport_get_pwwn(&fabric->bport))) {
 		bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_LOOPBACK);
@@ -1245,7 +1107,7 @@ bfa_fcs_fabric_uf_recv(struct bfa_fcs_fabric_s *fabric, struct fchs_s *fchs,
 	/*
 	 * FLOGI/EVFP exchanges should be consumed by base fabric.
 	 */
-	if (fchs->d_id == bfa_os_hton3b(FC_FABRIC_PORT)) {
+	if (fchs->d_id == bfa_hton3b(FC_FABRIC_PORT)) {
 		bfa_trc(fabric->fcs, pid);
 		bfa_fcs_fabric_process_uf(fabric, fchs, len);
 		return;
@@ -1358,13 +1220,13 @@ bfa_fcs_fabric_send_flogi_acc(struct bfa_fcs_fabric_s *fabric)
 		return;
 
 	reqlen = fc_flogi_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
-				    bfa_os_hton3b(FC_FABRIC_PORT),
+				    bfa_hton3b(FC_FABRIC_PORT),
 				    n2n_port->reply_oxid, pcfg->pwwn,
 				    pcfg->nwwn,
 				    bfa_fcport_get_maxfrsize(bfa),
 				    bfa_fcport_get_rx_bbcredit(bfa));
 
-	bfa_fcxp_send(fcxp, NULL, fabric->vf_id, bfa_lps_get_tag(fabric->lps),
+	bfa_fcxp_send(fcxp, NULL, fabric->vf_id, fabric->lps->lp_tag,
 		      BFA_FALSE, FC_CLASS_3,
 		      reqlen, &fchs, bfa_fcs_fabric_flogiacc_comp, fabric,
 		      FC_MAX_PDUSZ, 0);
@@ -1411,7 +1273,7 @@ bfa_fcs_fabric_set_fabric_name(struct bfa_fcs_fabric_s *fabric,
 		wwn2str(pwwn_ptr, bfa_fcs_lport_get_pwwn(&fabric->bport));
 		wwn2str(fwwn_ptr,
 			bfa_fcs_lport_get_fabric_name(&fabric->bport));
-		BFA_LOG(KERN_WARNING, bfad, log_level,
+		BFA_LOG(KERN_WARNING, bfad, bfa_log_level,
 			"Base port WWN = %s Fabric WWN = %s\n",
 			pwwn_ptr, fwwn_ptr);
 	}
@@ -1455,7 +1317,7 @@ bfa_fcs_port_event_handler(void *cbarg, enum bfa_port_linkstate event)
 		break;
 
 	default:
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
 
@@ -1502,7 +1364,7 @@ bfa_fcs_uf_recv(void *cbarg, struct bfa_uf_s *uf)
 		 * drop frame if vfid is unknown
 		 */
 		if (!fabric) {
-			bfa_assert(0);
+			WARN_ON(1);
 			bfa_stats(fcs, uf.vfid_unknown);
 			bfa_uf_free(uf);
 			return;
diff --git a/drivers/scsi/bfa/bfa_fcs.h b/drivers/scsi/bfa/bfa_fcs.h
index 9cb6a55977c..0fd63168573 100644
--- a/drivers/scsi/bfa/bfa_fcs.h
+++ b/drivers/scsi/bfa/bfa_fcs.h
@@ -27,6 +27,22 @@
 #define BFA_FCS_OS_STR_LEN		64
 
 /*
+ *  lps_pvt BFA LPS private functions
+ */
+
+enum bfa_lps_event {
+	BFA_LPS_SM_LOGIN	= 1,	/* login request from user      */
+	BFA_LPS_SM_LOGOUT	= 2,	/* logout request from user     */
+	BFA_LPS_SM_FWRSP	= 3,	/* f/w response to login/logout */
+	BFA_LPS_SM_RESUME	= 4,	/* space present in reqq queue  */
+	BFA_LPS_SM_DELETE	= 5,	/* lps delete from user         */
+	BFA_LPS_SM_OFFLINE	= 6,	/* Link is offline              */
+	BFA_LPS_SM_RX_CVL	= 7,	/* Rx clear virtual link        */
+	BFA_LPS_SM_SET_N2N_PID  = 8,	/* Set assigned PID for n2n */
+};
+
+
+/*
  * !!! Only append to the enums defined here to avoid any versioning
  * !!! needed between trace utility and driver version
  */
@@ -41,13 +57,12 @@ enum {
 struct bfa_fcs_s;
 
 #define __fcs_min_cfg(__fcs)       ((__fcs)->min_cfg)
-void bfa_fcs_modexit_comp(struct bfa_fcs_s *fcs);
 
 #define BFA_FCS_BRCD_SWITCH_OUI  0x051e
 #define N2N_LOCAL_PID	    0x010000
 #define N2N_REMOTE_PID		0x020000
 #define	BFA_FCS_RETRY_TIMEOUT 2000
-#define BFA_FCS_PID_IS_WKA(pid)  ((bfa_os_ntoh3b(pid) > 0xFFF000) ?  1 : 0)
+#define BFA_FCS_PID_IS_WKA(pid)  ((bfa_ntoh3b(pid) > 0xFFF000) ?  1 : 0)
 
 
 
@@ -109,7 +124,7 @@ struct bfa_fcs_lport_loop_s {
 
 struct bfa_fcs_lport_n2n_s {
 	u32        rsvd;
-	u16        reply_oxid;	/*  ox_id from the req flogi to be
+	__be16     reply_oxid;	/*  ox_id from the req flogi to be
 					 *used in flogi acc */
 	wwn_t           rem_port_wwn;	/*  Attached port's wwn */
 };
@@ -316,8 +331,6 @@ void            bfa_fcs_lport_add_rport(struct bfa_fcs_lport_s *port,
 				       struct bfa_fcs_rport_s *rport);
 void            bfa_fcs_lport_del_rport(struct bfa_fcs_lport_s *port,
 				       struct bfa_fcs_rport_s *rport);
-void bfa_fcs_lport_modinit(struct bfa_fcs_s *fcs);
-void bfa_fcs_lport_modexit(struct bfa_fcs_s *fcs);
 void            bfa_fcs_lport_ns_init(struct bfa_fcs_lport_s *vport);
 void            bfa_fcs_lport_ns_offline(struct bfa_fcs_lport_s *vport);
 void            bfa_fcs_lport_ns_online(struct bfa_fcs_lport_s *vport);
@@ -359,9 +372,6 @@ bfa_status_t bfa_fcs_vport_start(struct bfa_fcs_vport_s *vport);
 bfa_status_t bfa_fcs_vport_stop(struct bfa_fcs_vport_s *vport);
 void bfa_fcs_vport_get_attr(struct bfa_fcs_vport_s *vport,
 			    struct bfa_vport_attr_s *vport_attr);
-void bfa_fcs_vport_get_stats(struct bfa_fcs_vport_s *vport,
-			     struct bfa_vport_stats_s *vport_stats);
-void bfa_fcs_vport_clr_stats(struct bfa_fcs_vport_s *vport);
 struct bfa_fcs_vport_s *bfa_fcs_vport_lookup(struct bfa_fcs_s *fcs,
 					     u16 vf_id, wwn_t vpwwn);
 void bfa_fcs_vport_cleanup(struct bfa_fcs_vport_s *vport);
@@ -406,7 +416,7 @@ struct bfa_fcs_rport_s {
 	struct bfad_rport_s	*rp_drv;	/*  driver peer instance */
 	u32	pid;	/*  port ID of rport */
 	u16	maxfrsize;	/*  maximum frame size */
-	u16	reply_oxid;	/*  OX_ID of inbound requests */
+	__be16	reply_oxid;	/*  OX_ID of inbound requests */
 	enum fc_cos	fc_cos;	/*  FC classes of service supp */
 	bfa_boolean_t	cisc;	/*  CISC capable device */
 	bfa_boolean_t	prlo;	/*  processing prlo or LOGO */
@@ -437,32 +447,18 @@ bfa_fcs_rport_get_halrport(struct bfa_fcs_rport_s *rport)
 /*
  * bfa fcs rport API functions
  */
-bfa_status_t bfa_fcs_rport_add(struct bfa_fcs_lport_s *port, wwn_t *pwwn,
-			       struct bfa_fcs_rport_s *rport,
-			       struct bfad_rport_s *rport_drv);
-bfa_status_t bfa_fcs_rport_remove(struct bfa_fcs_rport_s *rport);
-void bfa_fcs_rport_get_attr(struct bfa_fcs_rport_s *rport,
-			    struct bfa_rport_attr_s *attr);
-void bfa_fcs_rport_get_stats(struct bfa_fcs_rport_s *rport,
-			     struct bfa_rport_stats_s *stats);
-void bfa_fcs_rport_clear_stats(struct bfa_fcs_rport_s *rport);
 struct bfa_fcs_rport_s *bfa_fcs_rport_lookup(struct bfa_fcs_lport_s *port,
 					     wwn_t rpwwn);
 struct bfa_fcs_rport_s *bfa_fcs_rport_lookup_by_nwwn(
 	struct bfa_fcs_lport_s *port, wwn_t rnwwn);
 void bfa_fcs_rport_set_del_timeout(u8 rport_tmo);
 
-void bfa_fcs_rport_set_speed(struct bfa_fcs_rport_s *rport,
-			     enum bfa_port_speed speed);
 void bfa_fcs_rport_uf_recv(struct bfa_fcs_rport_s *rport,
 	 struct fchs_s *fchs, u16 len);
 void bfa_fcs_rport_scn(struct bfa_fcs_rport_s *rport);
 
 struct bfa_fcs_rport_s *bfa_fcs_rport_create(struct bfa_fcs_lport_s *port,
 	 u32 pid);
-void bfa_fcs_rport_delete(struct bfa_fcs_rport_s *rport);
-void bfa_fcs_rport_online(struct bfa_fcs_rport_s *rport);
-void bfa_fcs_rport_offline(struct bfa_fcs_rport_s *rport);
 void bfa_fcs_rport_start(struct bfa_fcs_lport_s *port, struct fchs_s *rx_fchs,
 			 struct fc_logi_s *plogi_rsp);
 void bfa_fcs_rport_plogi_create(struct bfa_fcs_lport_s *port,
@@ -470,10 +466,8 @@ void bfa_fcs_rport_plogi_create(struct bfa_fcs_lport_s *port,
 				struct fc_logi_s *plogi);
 void bfa_fcs_rport_plogi(struct bfa_fcs_rport_s *rport, struct fchs_s *fchs,
 			 struct fc_logi_s *plogi);
-void bfa_fcs_rport_logo_imp(struct bfa_fcs_rport_s *rport);
-void bfa_fcs_rport_prlo(struct bfa_fcs_rport_s *rport, u16 ox_id);
+void bfa_fcs_rport_prlo(struct bfa_fcs_rport_s *rport, __be16 ox_id);
 
-void bfa_fcs_rport_itnim_ack(struct bfa_fcs_rport_s *rport);
 void bfa_fcs_rport_itntm_ack(struct bfa_fcs_rport_s *rport);
 void bfa_fcs_rport_fcptm_offline_done(struct bfa_fcs_rport_s *rport);
 int  bfa_fcs_rport_get_state(struct bfa_fcs_rport_s *rport);
@@ -618,7 +612,7 @@ struct bfa_fcs_fdmi_hba_attr_s {
 	u8         option_rom_ver[BFA_VERSION_LEN];
 	u8         fw_version[8];
 	u8         os_name[256];
-	u32        max_ct_pyld;
+	__be32        max_ct_pyld;
 };
 
 /*
@@ -626,9 +620,9 @@ struct bfa_fcs_fdmi_hba_attr_s {
  */
 struct bfa_fcs_fdmi_port_attr_s {
 	u8         supp_fc4_types[32];	/* supported FC4 types */
-	u32        supp_speed;	/* supported speed */
-	u32        curr_speed;	/* current Speed */
-	u32        max_frm_size;	/* max frame size */
+	__be32        supp_speed;	/* supported speed */
+	__be32        curr_speed;	/* current Speed */
+	__be32        max_frm_size;	/* max frame size */
 	u8         os_device_name[256];	/* OS device Name */
 	u8         host_name[256];	/* host name */
 };
@@ -664,6 +658,57 @@ struct bfa_fcs_s {
 };
 
 /*
+ *  fcs_fabric_sm fabric state machine functions
+ */
+
+/*
+ * Fabric state machine events
+ */
+enum bfa_fcs_fabric_event {
+	BFA_FCS_FABRIC_SM_CREATE        = 1,    /*  create from driver        */
+	BFA_FCS_FABRIC_SM_DELETE        = 2,    /*  delete from driver        */
+	BFA_FCS_FABRIC_SM_LINK_DOWN     = 3,    /*  link down from port      */
+	BFA_FCS_FABRIC_SM_LINK_UP       = 4,    /*  link up from port         */
+	BFA_FCS_FABRIC_SM_CONT_OP       = 5,    /*  flogi/auth continue op   */
+	BFA_FCS_FABRIC_SM_RETRY_OP      = 6,    /*  flogi/auth retry op      */
+	BFA_FCS_FABRIC_SM_NO_FABRIC     = 7,    /*  from flogi/auth           */
+	BFA_FCS_FABRIC_SM_PERF_EVFP     = 8,    /*  from flogi/auth           */
+	BFA_FCS_FABRIC_SM_ISOLATE       = 9,    /*  from EVFP processing     */
+	BFA_FCS_FABRIC_SM_NO_TAGGING    = 10,   /*  no VFT tagging from EVFP */
+	BFA_FCS_FABRIC_SM_DELAYED       = 11,   /*  timeout delay event      */
+	BFA_FCS_FABRIC_SM_AUTH_FAILED   = 12,   /*  auth failed       */
+	BFA_FCS_FABRIC_SM_AUTH_SUCCESS  = 13,   /*  auth successful           */
+	BFA_FCS_FABRIC_SM_DELCOMP       = 14,   /*  all vports deleted event */
+	BFA_FCS_FABRIC_SM_LOOPBACK      = 15,   /*  Received our own FLOGI   */
+	BFA_FCS_FABRIC_SM_START         = 16,   /*  from driver       */
+};
+
+/*
+ *  fcs_rport_sm FCS rport state machine events
+ */
+
+enum rport_event {
+	RPSM_EVENT_PLOGI_SEND   = 1,    /*  new rport; start with PLOGI */
+	RPSM_EVENT_PLOGI_RCVD   = 2,    /*  Inbound PLOGI from remote port */
+	RPSM_EVENT_PLOGI_COMP   = 3,    /*  PLOGI completed to rport    */
+	RPSM_EVENT_LOGO_RCVD    = 4,    /*  LOGO from remote device     */
+	RPSM_EVENT_LOGO_IMP     = 5,    /*  implicit logo for SLER      */
+	RPSM_EVENT_FCXP_SENT    = 6,    /*  Frame from has been sent    */
+	RPSM_EVENT_DELETE       = 7,    /*  RPORT delete request        */
+	RPSM_EVENT_SCN          = 8,    /*  state change notification   */
+	RPSM_EVENT_ACCEPTED     = 9,    /*  Good response from remote device */
+	RPSM_EVENT_FAILED       = 10,   /*  Request to rport failed.    */
+	RPSM_EVENT_TIMEOUT      = 11,   /*  Rport SM timeout event      */
+	RPSM_EVENT_HCB_ONLINE  = 12,    /*  BFA rport online callback   */
+	RPSM_EVENT_HCB_OFFLINE = 13,    /*  BFA rport offline callback  */
+	RPSM_EVENT_FC4_OFFLINE = 14,    /*  FC-4 offline complete       */
+	RPSM_EVENT_ADDRESS_CHANGE = 15, /*  Rport's PID has changed     */
+	RPSM_EVENT_ADDRESS_DISC = 16,   /*  Need to Discover rport's PID */
+	RPSM_EVENT_PRLO_RCVD   = 17,    /*  PRLO from remote device     */
+	RPSM_EVENT_PLOGI_RETRY = 18,    /*  Retry PLOGI continously */
+};
+
+/*
  * bfa fcs API functions
  */
 void bfa_fcs_attach(struct bfa_fcs_s *fcs, struct bfa_s *bfa,
@@ -672,16 +717,12 @@ void bfa_fcs_attach(struct bfa_fcs_s *fcs, struct bfa_s *bfa,
 void bfa_fcs_init(struct bfa_fcs_s *fcs);
 void bfa_fcs_driver_info_init(struct bfa_fcs_s *fcs,
 			      struct bfa_fcs_driver_info_s *driver_info);
-void bfa_fcs_set_fdmi_param(struct bfa_fcs_s *fcs, bfa_boolean_t fdmi_enable);
 void bfa_fcs_exit(struct bfa_fcs_s *fcs);
-void bfa_fcs_trc_init(struct bfa_fcs_s *fcs, struct bfa_trc_mod_s *trcmod);
-void		bfa_fcs_start(struct bfa_fcs_s *fcs);
 
 /*
  * bfa fcs vf public functions
  */
 bfa_fcs_vf_t *bfa_fcs_vf_lookup(struct bfa_fcs_s *fcs, u16 vf_id);
-u16 bfa_fcs_fabric_vport_count(struct bfa_fcs_fabric_s *fabric);
 
 /*
  * fabric protected interface functions
@@ -689,32 +730,29 @@ u16 bfa_fcs_fabric_vport_count(struct bfa_fcs_fabric_s *fabric);
 void bfa_fcs_fabric_attach(struct bfa_fcs_s *fcs);
 void bfa_fcs_fabric_modinit(struct bfa_fcs_s *fcs);
 void bfa_fcs_fabric_modexit(struct bfa_fcs_s *fcs);
-void bfa_fcs_fabric_modsusp(struct bfa_fcs_s *fcs);
 void bfa_fcs_fabric_link_up(struct bfa_fcs_fabric_s *fabric);
 void bfa_fcs_fabric_link_down(struct bfa_fcs_fabric_s *fabric);
 void bfa_fcs_fabric_addvport(struct bfa_fcs_fabric_s *fabric,
 	struct bfa_fcs_vport_s *vport);
 void bfa_fcs_fabric_delvport(struct bfa_fcs_fabric_s *fabric,
 	struct bfa_fcs_vport_s *vport);
-int bfa_fcs_fabric_is_online(struct bfa_fcs_fabric_s *fabric);
 struct bfa_fcs_vport_s *bfa_fcs_fabric_vport_lookup(
 		struct bfa_fcs_fabric_s *fabric, wwn_t pwwn);
 void bfa_fcs_fabric_modstart(struct bfa_fcs_s *fcs);
 void bfa_fcs_fabric_uf_recv(struct bfa_fcs_fabric_s *fabric,
 		struct fchs_s *fchs, u16 len);
-bfa_boolean_t	bfa_fcs_fabric_is_loopback(struct bfa_fcs_fabric_s *fabric);
-bfa_boolean_t	bfa_fcs_fabric_is_auth_failed(struct bfa_fcs_fabric_s *fabric);
-enum bfa_port_type bfa_fcs_fabric_port_type(struct bfa_fcs_fabric_s *fabric);
 void	bfa_fcs_fabric_psymb_init(struct bfa_fcs_fabric_s *fabric);
-void	bfa_fcs_fabric_port_delete_comp(struct bfa_fcs_fabric_s *fabric);
-bfa_status_t	bfa_fcs_fabric_addvf(struct bfa_fcs_fabric_s *vf,
-			struct bfa_fcs_s *fcs, struct bfa_lport_cfg_s *port_cfg,
-			struct bfad_vf_s *vf_drv);
 void bfa_fcs_fabric_set_fabric_name(struct bfa_fcs_fabric_s *fabric,
 	       wwn_t fabric_name);
 u16 bfa_fcs_fabric_get_switch_oui(struct bfa_fcs_fabric_s *fabric);
 void bfa_fcs_uf_attach(struct bfa_fcs_s *fcs);
 void bfa_fcs_port_attach(struct bfa_fcs_s *fcs);
+void bfa_fcs_fabric_sm_online(struct bfa_fcs_fabric_s *fabric,
+			enum bfa_fcs_fabric_event event);
+void bfa_fcs_fabric_sm_loopback(struct bfa_fcs_fabric_s *fabric,
+			enum bfa_fcs_fabric_event event);
+void bfa_fcs_fabric_sm_auth_failed(struct bfa_fcs_fabric_s *fabric,
+			enum bfa_fcs_fabric_event event);
 
 /*
  * BFA FCS callback interfaces
diff --git a/drivers/scsi/bfa/bfa_fcs_fcpim.c b/drivers/scsi/bfa/bfa_fcs_fcpim.c
index 9662bcdeb41..e7b49f4cb51 100644
--- a/drivers/scsi/bfa/bfa_fcs_fcpim.c
+++ b/drivers/scsi/bfa/bfa_fcs_fcpim.c
@@ -19,9 +19,9 @@
  *  fcpim.c - FCP initiator mode i-t nexus state machine
  */
 
+#include "bfad_drv.h"
 #include "bfa_fcs.h"
 #include "bfa_fcbuild.h"
-#include "bfad_drv.h"
 #include "bfad_im.h"
 
 BFA_TRC_FILE(FCS, FCPIM);
@@ -103,7 +103,7 @@ bfa_fcs_itnim_sm_offline(struct bfa_fcs_itnim_s *itnim,
 		break;
 
 	case BFA_FCS_ITNIM_SM_OFFLINE:
-		bfa_fcs_rport_itnim_ack(itnim->rport);
+		bfa_sm_send_event(itnim->rport, RPSM_EVENT_FC4_OFFLINE);
 		break;
 
 	case BFA_FCS_ITNIM_SM_INITIATOR:
@@ -140,7 +140,7 @@ bfa_fcs_itnim_sm_prli_send(struct bfa_fcs_itnim_s *itnim,
 	case BFA_FCS_ITNIM_SM_OFFLINE:
 		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
 		bfa_fcxp_walloc_cancel(itnim->fcs->bfa, &itnim->fcxp_wqe);
-		bfa_fcs_rport_itnim_ack(itnim->rport);
+		bfa_sm_send_event(itnim->rport, RPSM_EVENT_FC4_OFFLINE);
 		break;
 
 	case BFA_FCS_ITNIM_SM_DELETE:
@@ -181,7 +181,7 @@ bfa_fcs_itnim_sm_prli(struct bfa_fcs_itnim_s *itnim,
 	case BFA_FCS_ITNIM_SM_OFFLINE:
 		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
 		bfa_fcxp_discard(itnim->fcxp);
-		bfa_fcs_rport_itnim_ack(itnim->rport);
+		bfa_sm_send_event(itnim->rport, RPSM_EVENT_FC4_OFFLINE);
 		break;
 
 	case BFA_FCS_ITNIM_SM_INITIATOR:
@@ -217,7 +217,7 @@ bfa_fcs_itnim_sm_prli_retry(struct bfa_fcs_itnim_s *itnim,
 		} else {
 			/* invoke target offline */
 			bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
-			bfa_fcs_rport_logo_imp(itnim->rport);
+			bfa_sm_send_event(itnim->rport, RPSM_EVENT_LOGO_IMP);
 		}
 		break;
 
@@ -225,7 +225,7 @@ bfa_fcs_itnim_sm_prli_retry(struct bfa_fcs_itnim_s *itnim,
 	case BFA_FCS_ITNIM_SM_OFFLINE:
 		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
 		bfa_timer_stop(&itnim->timer);
-		bfa_fcs_rport_itnim_ack(itnim->rport);
+		bfa_sm_send_event(itnim->rport, RPSM_EVENT_FC4_OFFLINE);
 		break;
 
 	case BFA_FCS_ITNIM_SM_INITIATOR:
@@ -261,7 +261,7 @@ bfa_fcs_itnim_sm_hcb_online(struct bfa_fcs_itnim_s *itnim,
 		bfa_fcb_itnim_online(itnim->itnim_drv);
 		wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(itnim->rport->port));
 		wwn2str(rpwwn_buf, itnim->rport->pwwn);
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 		"Target (WWN = %s) is online for initiator (WWN = %s)\n",
 		rpwwn_buf, lpwwn_buf);
 		break;
@@ -269,7 +269,7 @@ bfa_fcs_itnim_sm_hcb_online(struct bfa_fcs_itnim_s *itnim,
 	case BFA_FCS_ITNIM_SM_OFFLINE:
 		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
 		bfa_itnim_offline(itnim->bfa_itnim);
-		bfa_fcs_rport_itnim_ack(itnim->rport);
+		bfa_sm_send_event(itnim->rport, RPSM_EVENT_FC4_OFFLINE);
 		break;
 
 	case BFA_FCS_ITNIM_SM_DELETE:
@@ -301,11 +301,11 @@ bfa_fcs_itnim_sm_online(struct bfa_fcs_itnim_s *itnim,
 		wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(itnim->rport->port));
 		wwn2str(rpwwn_buf, itnim->rport->pwwn);
 		if (bfa_fcs_lport_is_online(itnim->rport->port) == BFA_TRUE)
-			BFA_LOG(KERN_ERR, bfad, log_level,
+			BFA_LOG(KERN_ERR, bfad, bfa_log_level,
 			"Target (WWN = %s) connectivity lost for "
 			"initiator (WWN = %s)\n", rpwwn_buf, lpwwn_buf);
 		else
-			BFA_LOG(KERN_INFO, bfad, log_level,
+			BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 			"Target (WWN = %s) offlined by initiator (WWN = %s)\n",
 			rpwwn_buf, lpwwn_buf);
 		break;
@@ -330,7 +330,7 @@ bfa_fcs_itnim_sm_hcb_offline(struct bfa_fcs_itnim_s *itnim,
 	switch (event) {
 	case BFA_FCS_ITNIM_SM_HCB_OFFLINE:
 		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
-		bfa_fcs_rport_itnim_ack(itnim->rport);
+		bfa_sm_send_event(itnim->rport, RPSM_EVENT_FC4_OFFLINE);
 		break;
 
 	case BFA_FCS_ITNIM_SM_DELETE:
@@ -358,7 +358,7 @@ bfa_fcs_itnim_sm_initiator(struct bfa_fcs_itnim_s *itnim,
 	switch (event) {
 	case BFA_FCS_ITNIM_SM_OFFLINE:
 		bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
-		bfa_fcs_rport_itnim_ack(itnim->rport);
+		bfa_sm_send_event(itnim->rport, RPSM_EVENT_FC4_OFFLINE);
 		break;
 
 	case BFA_FCS_ITNIM_SM_RSP_ERROR:
@@ -536,7 +536,7 @@ bfa_fcs_itnim_create(struct bfa_fcs_rport_s *rport)
 	if (bfa_itnim == NULL) {
 		bfa_trc(port->fcs, rport->pwwn);
 		bfa_fcb_itnim_free(port->fcs->bfad, itnim_drv);
-		bfa_assert(0);
+		WARN_ON(1);
 		return NULL;
 	}
 
@@ -688,7 +688,7 @@ bfa_cb_itnim_sler(void *cb_arg)
 
 	itnim->stats.sler++;
 	bfa_trc(itnim->fcs, itnim->rport->pwwn);
-	bfa_fcs_rport_logo_imp(itnim->rport);
+	bfa_sm_send_event(itnim->rport, RPSM_EVENT_LOGO_IMP);
 }
 
 struct bfa_fcs_itnim_s *
@@ -700,7 +700,7 @@ bfa_fcs_itnim_lookup(struct bfa_fcs_lport_s *port, wwn_t rpwwn)
 	if (!rport)
 		return NULL;
 
-	bfa_assert(rport->itnim != NULL);
+	WARN_ON(rport->itnim == NULL);
 	return rport->itnim;
 }
 
@@ -729,7 +729,7 @@ bfa_fcs_itnim_stats_get(struct bfa_fcs_lport_s *port, wwn_t rpwwn,
 {
 	struct bfa_fcs_itnim_s *itnim = NULL;
 
-	bfa_assert(port != NULL);
+	WARN_ON(port == NULL);
 
 	itnim = bfa_fcs_itnim_lookup(port, rpwwn);
 
@@ -746,7 +746,7 @@ bfa_fcs_itnim_stats_clear(struct bfa_fcs_lport_s *port, wwn_t rpwwn)
 {
 	struct bfa_fcs_itnim_s *itnim = NULL;
 
-	bfa_assert(port != NULL);
+	WARN_ON(port == NULL);
 
 	itnim = bfa_fcs_itnim_lookup(port, rpwwn);
 
@@ -778,6 +778,6 @@ bfa_fcs_fcpim_uf_recv(struct bfa_fcs_itnim_s *itnim,
 		break;
 
 	default:
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index 377cbfff6f2..4e2eb92ba02 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -15,10 +15,10 @@
  * General Public License for more details.
  */
 
+#include "bfad_drv.h"
 #include "bfa_fcs.h"
 #include "bfa_fcbuild.h"
 #include "bfa_fc.h"
-#include "bfad_drv.h"
 
 BFA_TRC_FILE(FCS, PORT);
 
@@ -159,7 +159,7 @@ bfa_fcs_lport_sm_online(
 			bfa_sm_set_state(port, bfa_fcs_lport_sm_deleting);
 			list_for_each_safe(qe, qen, &port->rport_q) {
 				rport = (struct bfa_fcs_rport_s *) qe;
-				bfa_fcs_rport_delete(rport);
+				bfa_sm_send_event(rport, RPSM_EVENT_DELETE);
 			}
 		}
 		break;
@@ -197,7 +197,7 @@ bfa_fcs_lport_sm_offline(
 			bfa_sm_set_state(port, bfa_fcs_lport_sm_deleting);
 			list_for_each_safe(qe, qen, &port->rport_q) {
 				rport = (struct bfa_fcs_rport_s *) qe;
-				bfa_fcs_rport_delete(rport);
+				bfa_sm_send_event(rport, RPSM_EVENT_DELETE);
 			}
 		}
 		break;
@@ -309,6 +309,7 @@ bfa_fcs_lport_plogi(struct bfa_fcs_lport_s *port,
 			return;
 		}
 		port->pid  = rx_fchs->d_id;
+		bfa_lps_set_n2n_pid(port->fabric->lps, rx_fchs->d_id);
 	}
 
 	/*
@@ -323,6 +324,7 @@ bfa_fcs_lport_plogi(struct bfa_fcs_lport_s *port,
 			(memcmp((void *)&bfa_fcs_lport_get_pwwn(port),
 			(void *)&plogi->port_name, sizeof(wwn_t)) < 0)) {
 			port->pid  = rx_fchs->d_id;
+			bfa_lps_set_n2n_pid(port->fabric->lps, rx_fchs->d_id);
 			rport->pid = rx_fchs->s_id;
 		}
 		bfa_fcs_rport_plogi(rport, rx_fchs, plogi);
@@ -349,8 +351,8 @@ bfa_fcs_lport_plogi(struct bfa_fcs_lport_s *port,
 		 * This is a different device with the same pid. Old device
 		 * disappeared. Send implicit LOGO to old device.
 		 */
-		bfa_assert(rport->pwwn != plogi->port_name);
-		bfa_fcs_rport_logo_imp(rport);
+		WARN_ON(rport->pwwn == plogi->port_name);
+		bfa_sm_send_event(rport, RPSM_EVENT_LOGO_IMP);
 
 		/*
 		 * Inbound PLOGI from a new device (with old PID).
@@ -362,7 +364,7 @@ bfa_fcs_lport_plogi(struct bfa_fcs_lport_s *port,
 	/*
 	 * PLOGI crossing each other.
 	 */
-	bfa_assert(rport->pwwn == WWN_NULL);
+	WARN_ON(rport->pwwn != WWN_NULL);
 	bfa_fcs_rport_plogi(rport, rx_fchs, plogi);
 }
 
@@ -491,7 +493,7 @@ bfa_fcs_lport_online_actions(struct bfa_fcs_lport_s *port)
 	__port_action[port->fabric->fab_type].online(port);
 
 	wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(port));
-	BFA_LOG(KERN_INFO, bfad, log_level,
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 		"Logical port online: WWN = %s Role = %s\n",
 		lpwwn_buf, "Initiator");
 
@@ -511,37 +513,38 @@ bfa_fcs_lport_offline_actions(struct bfa_fcs_lport_s *port)
 	__port_action[port->fabric->fab_type].offline(port);
 
 	wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(port));
-	if (bfa_fcs_fabric_is_online(port->fabric) == BFA_TRUE)
-		BFA_LOG(KERN_ERR, bfad, log_level,
+	if (bfa_sm_cmp_state(port->fabric,
+			bfa_fcs_fabric_sm_online) == BFA_TRUE)
+		BFA_LOG(KERN_ERR, bfad, bfa_log_level,
 		"Logical port lost fabric connectivity: WWN = %s Role = %s\n",
 		lpwwn_buf, "Initiator");
 	else
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 		"Logical port taken offline: WWN = %s Role = %s\n",
 		lpwwn_buf, "Initiator");
 
 	list_for_each_safe(qe, qen, &port->rport_q) {
 		rport = (struct bfa_fcs_rport_s *) qe;
-		bfa_fcs_rport_offline(rport);
+		bfa_sm_send_event(rport, RPSM_EVENT_LOGO_IMP);
 	}
 }
 
 static void
 bfa_fcs_lport_unknown_init(struct bfa_fcs_lport_s *port)
 {
-	bfa_assert(0);
+	WARN_ON(1);
 }
 
 static void
 bfa_fcs_lport_unknown_online(struct bfa_fcs_lport_s *port)
 {
-	bfa_assert(0);
+	WARN_ON(1);
 }
 
 static void
 bfa_fcs_lport_unknown_offline(struct bfa_fcs_lport_s *port)
 {
-	bfa_assert(0);
+	WARN_ON(1);
 }
 
 static void
@@ -573,7 +576,7 @@ bfa_fcs_lport_deleted(struct bfa_fcs_lport_s *port)
 	char    lpwwn_buf[BFA_STRING_32];
 
 	wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(port));
-	BFA_LOG(KERN_INFO, bfad, log_level,
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 		"Logical port deleted: WWN = %s Role = %s\n",
 		lpwwn_buf, "Initiator");
 
@@ -584,33 +587,11 @@ bfa_fcs_lport_deleted(struct bfa_fcs_lport_s *port)
 				port->vport ? port->vport->vport_drv : NULL);
 		bfa_fcs_vport_delete_comp(port->vport);
 	} else {
-		 bfa_fcs_fabric_port_delete_comp(port->fabric);
+		bfa_wc_down(&port->fabric->wc);
 	}
 }
 
 
-
-/*
- *  fcs_lport_api BFA FCS port API
- */
-/*
- *   Module initialization
- */
-void
-bfa_fcs_lport_modinit(struct bfa_fcs_s *fcs)
-{
-
-}
-
-/*
- *   Module cleanup
- */
-void
-bfa_fcs_lport_modexit(struct bfa_fcs_s *fcs)
-{
-	bfa_fcs_modexit_comp(fcs);
-}
-
 /*
  * Unsolicited frame receive handling.
  */
@@ -623,6 +604,7 @@ bfa_fcs_lport_uf_recv(struct bfa_fcs_lport_s *lport,
 	struct fc_els_cmd_s *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
 
 	bfa_stats(lport, uf_recvs);
+	bfa_trc(lport->fcs, fchs->type);
 
 	if (!bfa_fcs_lport_is_online(lport)) {
 		bfa_stats(lport, uf_recv_drops);
@@ -682,8 +664,11 @@ bfa_fcs_lport_uf_recv(struct bfa_fcs_lport_s *lport,
 	 * Only handles ELS frames for now.
 	 */
 	if (fchs->type != FC_TYPE_ELS) {
-		bfa_trc(lport->fcs, fchs->type);
-		bfa_assert(0);
+		bfa_trc(lport->fcs, fchs->s_id);
+		bfa_trc(lport->fcs, fchs->d_id);
+		/* ignore type FC_TYPE_FC_FSS */
+		if (fchs->type != FC_TYPE_FC_FSS)
+			bfa_sm_fault(lport->fcs, fchs->type);
 		return;
 	}
 
@@ -792,7 +777,7 @@ bfa_fcs_lport_del_rport(
 	struct bfa_fcs_lport_s *port,
 	struct bfa_fcs_rport_s *rport)
 {
-	bfa_assert(bfa_q_is_on_q(&port->rport_q, rport));
+	WARN_ON(!bfa_q_is_on_q(&port->rport_q, rport));
 	list_del(&rport->qe);
 	port->num_rports--;
 
@@ -850,8 +835,8 @@ bfa_fcs_lport_attach(struct bfa_fcs_lport_s *lport, struct bfa_fcs_s *fcs,
 	lport->fcs = fcs;
 	lport->fabric = bfa_fcs_vf_lookup(fcs, vf_id);
 	lport->vport = vport;
-	lport->lp_tag = (vport) ? bfa_lps_get_tag(vport->lps) :
-				  bfa_lps_get_tag(lport->fabric->lps);
+	lport->lp_tag = (vport) ? vport->lps->lp_tag :
+				  lport->fabric->lps->lp_tag;
 
 	INIT_LIST_HEAD(&lport->rport_q);
 	lport->num_rports = 0;
@@ -878,7 +863,7 @@ bfa_fcs_lport_init(struct bfa_fcs_lport_s *lport,
 					vport ? vport->vport_drv : NULL);
 
 	wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(lport));
-	BFA_LOG(KERN_INFO, bfad, log_level,
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 		"New logical port created: WWN = %s Role = %s\n",
 		lpwwn_buf, "Initiator");
 
@@ -903,10 +888,12 @@ bfa_fcs_lport_get_attr(
 	port_attr->port_cfg = port->port_cfg;
 
 	if (port->fabric) {
-		port_attr->port_type = bfa_fcs_fabric_port_type(port->fabric);
-		port_attr->loopback = bfa_fcs_fabric_is_loopback(port->fabric);
+		port_attr->port_type = port->fabric->oper_type;
+		port_attr->loopback = bfa_sm_cmp_state(port->fabric,
+				bfa_fcs_fabric_sm_loopback);
 		port_attr->authfail =
-			bfa_fcs_fabric_is_auth_failed(port->fabric);
+			bfa_sm_cmp_state(port->fabric,
+				bfa_fcs_fabric_sm_auth_failed);
 		port_attr->fabric_name  = bfa_fcs_lport_get_fabric_name(port);
 		memcpy(port_attr->fabric_ip_addr,
 			bfa_fcs_lport_get_fabric_ipaddr(port),
@@ -915,10 +902,10 @@ bfa_fcs_lport_get_attr(
 		if (port->vport != NULL) {
 			port_attr->port_type = BFA_PORT_TYPE_VPORT;
 			port_attr->fpma_mac =
-				bfa_lps_get_lp_mac(port->vport->lps);
+				port->vport->lps->lp_mac;
 		} else {
 			port_attr->fpma_mac =
-				bfa_lps_get_lp_mac(port->fabric->lps);
+				port->fabric->lps->lp_mac;
 		}
 	} else {
 		port_attr->port_type = BFA_PORT_TYPE_UNKNOWN;
@@ -998,6 +985,7 @@ bfa_fcs_lport_n2n_online(struct bfa_fcs_lport_s *port)
 	    ((void *)&pcfg->pwwn, (void *)&n2n_port->rem_port_wwn,
 	     sizeof(wwn_t)) > 0) {
 		port->pid = N2N_LOCAL_PID;
+		bfa_lps_set_n2n_pid(port->fabric->lps, N2N_LOCAL_PID);
 		/*
 		 * First, check if we know the device by pwwn.
 		 */
@@ -1007,7 +995,7 @@ bfa_fcs_lport_n2n_online(struct bfa_fcs_lport_s *port)
 			bfa_trc(port->fcs, rport->pid);
 			bfa_trc(port->fcs, rport->pwwn);
 			rport->pid = N2N_REMOTE_PID;
-			bfa_fcs_rport_online(rport);
+			bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_SEND);
 			return;
 		}
 
@@ -1017,10 +1005,10 @@ bfa_fcs_lport_n2n_online(struct bfa_fcs_lport_s *port)
 		 */
 		if (port->num_rports > 0) {
 			rport = bfa_fcs_lport_get_rport_by_pid(port, 0);
-			bfa_assert(rport != NULL);
+			WARN_ON(rport == NULL);
 			if (rport) {
 				bfa_trc(port->fcs, rport->pwwn);
-				bfa_fcs_rport_delete(rport);
+				bfa_sm_send_event(rport, RPSM_EVENT_DELETE);
 			}
 		}
 		bfa_fcs_rport_create(port, N2N_REMOTE_PID);
@@ -1569,6 +1557,7 @@ bfa_fcs_lport_fdmi_build_rhba_pyld(struct bfa_fcs_lport_fdmi_s *fdmi, u8 *pyld)
 	struct fdmi_attr_s *attr;
 	u8        *curr_ptr;
 	u16        len, count;
+	u16	templen;
 
 	/*
 	 * get hba attributes
@@ -1594,69 +1583,69 @@ bfa_fcs_lport_fdmi_build_rhba_pyld(struct bfa_fcs_lport_fdmi_s *fdmi, u8 *pyld)
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_NODENAME);
-	attr->len = sizeof(wwn_t);
-	memcpy(attr->value, &bfa_fcs_lport_get_nwwn(port), attr->len);
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;
+	templen = sizeof(wwn_t);
+	memcpy(attr->value, &bfa_fcs_lport_get_nwwn(port), templen);
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;
 	count++;
-	attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+	attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * Manufacturer
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_MANUFACTURER);
-	attr->len = (u16) strlen(fcs_hba_attr->manufacturer);
-	memcpy(attr->value, fcs_hba_attr->manufacturer, attr->len);
-	attr->len = fc_roundup(attr->len, sizeof(u32));
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;
+	templen = (u16) strlen(fcs_hba_attr->manufacturer);
+	memcpy(attr->value, fcs_hba_attr->manufacturer, templen);
+	templen = fc_roundup(templen, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;
 	count++;
-	attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+	attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * Serial Number
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_SERIALNUM);
-	attr->len = (u16) strlen(fcs_hba_attr->serial_num);
-	memcpy(attr->value, fcs_hba_attr->serial_num, attr->len);
-	attr->len = fc_roundup(attr->len, sizeof(u32));
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;
+	templen = (u16) strlen(fcs_hba_attr->serial_num);
+	memcpy(attr->value, fcs_hba_attr->serial_num, templen);
+	templen = fc_roundup(templen, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;
 	count++;
-	attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+	attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * Model
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_MODEL);
-	attr->len = (u16) strlen(fcs_hba_attr->model);
-	memcpy(attr->value, fcs_hba_attr->model, attr->len);
-	attr->len = fc_roundup(attr->len, sizeof(u32));
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;
+	templen = (u16) strlen(fcs_hba_attr->model);
+	memcpy(attr->value, fcs_hba_attr->model, templen);
+	templen = fc_roundup(templen, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;
 	count++;
-	attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+	attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * Model Desc
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_MODEL_DESC);
-	attr->len = (u16) strlen(fcs_hba_attr->model_desc);
-	memcpy(attr->value, fcs_hba_attr->model_desc, attr->len);
-	attr->len = fc_roundup(attr->len, sizeof(u32));
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;
+	templen = (u16) strlen(fcs_hba_attr->model_desc);
+	memcpy(attr->value, fcs_hba_attr->model_desc, templen);
+	templen = fc_roundup(templen, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;
 	count++;
-	attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+	attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * H/W Version
@@ -1664,14 +1653,14 @@ bfa_fcs_lport_fdmi_build_rhba_pyld(struct bfa_fcs_lport_fdmi_s *fdmi, u8 *pyld)
 	if (fcs_hba_attr->hw_version[0] != '\0') {
 		attr = (struct fdmi_attr_s *) curr_ptr;
 		attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_HW_VERSION);
-		attr->len = (u16) strlen(fcs_hba_attr->hw_version);
-		memcpy(attr->value, fcs_hba_attr->hw_version, attr->len);
-		attr->len = fc_roundup(attr->len, sizeof(u32));
-		curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-		len += attr->len;
+		templen = (u16) strlen(fcs_hba_attr->hw_version);
+		memcpy(attr->value, fcs_hba_attr->hw_version, templen);
+		templen = fc_roundup(templen, sizeof(u32));
+		curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+		len += templen;
 		count++;
-		attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-					 sizeof(attr->len));
+		attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+					 sizeof(templen));
 	}
 
 	/*
@@ -1679,14 +1668,14 @@ bfa_fcs_lport_fdmi_build_rhba_pyld(struct bfa_fcs_lport_fdmi_s *fdmi, u8 *pyld)
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_DRIVER_VERSION);
-	attr->len = (u16) strlen(fcs_hba_attr->driver_version);
-	memcpy(attr->value, fcs_hba_attr->driver_version, attr->len);
-	attr->len = fc_roundup(attr->len, sizeof(u32));
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;;
+	templen = (u16) strlen(fcs_hba_attr->driver_version);
+	memcpy(attr->value, fcs_hba_attr->driver_version, templen);
+	templen = fc_roundup(templen, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;;
 	count++;
-	attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+	attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * Option Rom Version
@@ -1694,14 +1683,14 @@ bfa_fcs_lport_fdmi_build_rhba_pyld(struct bfa_fcs_lport_fdmi_s *fdmi, u8 *pyld)
 	if (fcs_hba_attr->option_rom_ver[0] != '\0') {
 		attr = (struct fdmi_attr_s *) curr_ptr;
 		attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_ROM_VERSION);
-		attr->len = (u16) strlen(fcs_hba_attr->option_rom_ver);
-		memcpy(attr->value, fcs_hba_attr->option_rom_ver, attr->len);
-		attr->len = fc_roundup(attr->len, sizeof(u32));
-		curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-		len += attr->len;
+		templen = (u16) strlen(fcs_hba_attr->option_rom_ver);
+		memcpy(attr->value, fcs_hba_attr->option_rom_ver, templen);
+		templen = fc_roundup(templen, sizeof(u32));
+		curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+		len += templen;
 		count++;
-		attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-					 sizeof(attr->len));
+		attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+					 sizeof(templen));
 	}
 
 	/*
@@ -1709,14 +1698,14 @@ bfa_fcs_lport_fdmi_build_rhba_pyld(struct bfa_fcs_lport_fdmi_s *fdmi, u8 *pyld)
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_FW_VERSION);
-	attr->len = (u16) strlen(fcs_hba_attr->driver_version);
-	memcpy(attr->value, fcs_hba_attr->driver_version, attr->len);
-	attr->len = fc_roundup(attr->len, sizeof(u32));
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;
+	templen = (u16) strlen(fcs_hba_attr->driver_version);
+	memcpy(attr->value, fcs_hba_attr->driver_version, templen);
+	templen = fc_roundup(templen, sizeof(u32));
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;
 	count++;
-	attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+	attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * OS Name
@@ -1724,14 +1713,14 @@ bfa_fcs_lport_fdmi_build_rhba_pyld(struct bfa_fcs_lport_fdmi_s *fdmi, u8 *pyld)
 	if (fcs_hba_attr->os_name[0] != '\0') {
 		attr = (struct fdmi_attr_s *) curr_ptr;
 		attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_OS_NAME);
-		attr->len = (u16) strlen(fcs_hba_attr->os_name);
-		memcpy(attr->value, fcs_hba_attr->os_name, attr->len);
-		attr->len = fc_roundup(attr->len, sizeof(u32));
-		curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-		len += attr->len;
+		templen = (u16) strlen(fcs_hba_attr->os_name);
+		memcpy(attr->value, fcs_hba_attr->os_name, templen);
+		templen = fc_roundup(templen, sizeof(u32));
+		curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+		len += templen;
 		count++;
-		attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-					sizeof(attr->len));
+		attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+					sizeof(templen));
 	}
 
 	/*
@@ -1739,12 +1728,12 @@ bfa_fcs_lport_fdmi_build_rhba_pyld(struct bfa_fcs_lport_fdmi_s *fdmi, u8 *pyld)
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_HBA_ATTRIB_MAX_CT);
-	attr->len = sizeof(fcs_hba_attr->max_ct_pyld);
-	memcpy(attr->value, &fcs_hba_attr->max_ct_pyld, attr->len);
-	len += attr->len;
+	templen = sizeof(fcs_hba_attr->max_ct_pyld);
+	memcpy(attr->value, &fcs_hba_attr->max_ct_pyld, templen);
+	len += templen;
 	count++;
-	attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+	attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * Update size of payload
@@ -1845,6 +1834,7 @@ bfa_fcs_lport_fdmi_build_portattr_block(struct bfa_fcs_lport_fdmi_s *fdmi,
 	u8        *curr_ptr;
 	u16        len;
 	u8	count = 0;
+	u16	templen;
 
 	/*
 	 * get port attributes
@@ -1863,54 +1853,54 @@ bfa_fcs_lport_fdmi_build_portattr_block(struct bfa_fcs_lport_fdmi_s *fdmi,
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_PORT_ATTRIB_FC4_TYPES);
-	attr->len = sizeof(fcs_port_attr.supp_fc4_types);
-	memcpy(attr->value, fcs_port_attr.supp_fc4_types, attr->len);
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;
+	templen = sizeof(fcs_port_attr.supp_fc4_types);
+	memcpy(attr->value, fcs_port_attr.supp_fc4_types, templen);
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;
 	++count;
 	attr->len =
-		cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+		cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * Supported Speed
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_PORT_ATTRIB_SUPP_SPEED);
-	attr->len = sizeof(fcs_port_attr.supp_speed);
-	memcpy(attr->value, &fcs_port_attr.supp_speed, attr->len);
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;
+	templen = sizeof(fcs_port_attr.supp_speed);
+	memcpy(attr->value, &fcs_port_attr.supp_speed, templen);
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;
 	++count;
 	attr->len =
-		cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+		cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * current Port Speed
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_PORT_ATTRIB_PORT_SPEED);
-	attr->len = sizeof(fcs_port_attr.curr_speed);
-	memcpy(attr->value, &fcs_port_attr.curr_speed, attr->len);
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;
+	templen = sizeof(fcs_port_attr.curr_speed);
+	memcpy(attr->value, &fcs_port_attr.curr_speed, templen);
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;
 	++count;
-	attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+	attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * max frame size
 	 */
 	attr = (struct fdmi_attr_s *) curr_ptr;
 	attr->type = cpu_to_be16(FDMI_PORT_ATTRIB_FRAME_SIZE);
-	attr->len = sizeof(fcs_port_attr.max_frm_size);
-	memcpy(attr->value, &fcs_port_attr.max_frm_size, attr->len);
-	curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-	len += attr->len;
+	templen = sizeof(fcs_port_attr.max_frm_size);
+	memcpy(attr->value, &fcs_port_attr.max_frm_size, templen);
+	curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+	len += templen;
 	++count;
-	attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-			     sizeof(attr->len));
+	attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+			     sizeof(templen));
 
 	/*
 	 * OS Device Name
@@ -1918,14 +1908,14 @@ bfa_fcs_lport_fdmi_build_portattr_block(struct bfa_fcs_lport_fdmi_s *fdmi,
 	if (fcs_port_attr.os_device_name[0] != '\0') {
 		attr = (struct fdmi_attr_s *) curr_ptr;
 		attr->type = cpu_to_be16(FDMI_PORT_ATTRIB_DEV_NAME);
-		attr->len = (u16) strlen(fcs_port_attr.os_device_name);
-		memcpy(attr->value, fcs_port_attr.os_device_name, attr->len);
-		attr->len = fc_roundup(attr->len, sizeof(u32));
-		curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-		len += attr->len;
+		templen = (u16) strlen(fcs_port_attr.os_device_name);
+		memcpy(attr->value, fcs_port_attr.os_device_name, templen);
+		templen = fc_roundup(templen, sizeof(u32));
+		curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+		len += templen;
 		++count;
-		attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-					sizeof(attr->len));
+		attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+					sizeof(templen));
 	}
 	/*
 	 * Host Name
@@ -1933,14 +1923,14 @@ bfa_fcs_lport_fdmi_build_portattr_block(struct bfa_fcs_lport_fdmi_s *fdmi,
 	if (fcs_port_attr.host_name[0] != '\0') {
 		attr = (struct fdmi_attr_s *) curr_ptr;
 		attr->type = cpu_to_be16(FDMI_PORT_ATTRIB_HOST_NAME);
-		attr->len = (u16) strlen(fcs_port_attr.host_name);
-		memcpy(attr->value, fcs_port_attr.host_name, attr->len);
-		attr->len = fc_roundup(attr->len, sizeof(u32));
-		curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
-		len += attr->len;
+		templen = (u16) strlen(fcs_port_attr.host_name);
+		memcpy(attr->value, fcs_port_attr.host_name, templen);
+		templen = fc_roundup(templen, sizeof(u32));
+		curr_ptr += sizeof(attr->type) + sizeof(templen) + templen;
+		len += templen;
 		++count;
-		attr->len = cpu_to_be16(attr->len + sizeof(attr->type) +
-				sizeof(attr->len));
+		attr->len = cpu_to_be16(templen + sizeof(attr->type) +
+				sizeof(templen));
 	}
 
 	/*
@@ -2103,7 +2093,7 @@ bfa_fcs_lport_fdmi_timeout(void *arg)
 	bfa_sm_send_event(fdmi, FDMISM_EVENT_TIMEOUT);
 }
 
-void
+static void
 bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_lport_fdmi_s *fdmi,
 			 struct bfa_fcs_fdmi_hba_attr_s *hba_attr)
 {
@@ -2147,7 +2137,7 @@ bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_lport_fdmi_s *fdmi,
 	hba_attr->max_ct_pyld = cpu_to_be32(FC_MAX_PDUSZ);
 }
 
-void
+static void
 bfa_fcs_fdmi_get_portattr(struct bfa_fcs_lport_fdmi_s *fdmi,
 			  struct bfa_fcs_fdmi_port_attr_s *port_attr)
 {
@@ -2560,7 +2550,7 @@ bfa_fcs_lport_ms_send_gmal(void *ms_cbarg, struct bfa_fcxp_s *fcxp_alloced)
 
 	len = fc_gmal_req_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
 			     bfa_fcs_lport_get_fcid(port),
-				 bfa_lps_get_peer_nwwn(port->fabric->lps));
+				 port->fabric->lps->pr_nwwn);
 
 	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
 			  FC_CLASS_3, len, &fchs,
@@ -2760,7 +2750,7 @@ bfa_fcs_lport_ms_send_gfn(void *ms_cbarg, struct bfa_fcxp_s *fcxp_alloced)
 
 	len = fc_gfn_req_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
 			     bfa_fcs_lport_get_fcid(port),
-				 bfa_lps_get_peer_nwwn(port->fabric->lps));
+				 port->fabric->lps->pr_nwwn);
 
 	bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
 			  FC_CLASS_3, len, &fchs,
@@ -2836,7 +2826,7 @@ bfa_fcs_lport_ms_send_plogi(void *ms_cbarg, struct bfa_fcxp_s *fcxp_alloced)
 	ms->fcxp = fcxp;
 
 	len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
-			     bfa_os_hton3b(FC_MGMT_SERVER),
+			     bfa_hton3b(FC_MGMT_SERVER),
 			     bfa_fcs_lport_get_fcid(port), 0,
 			     port->port_cfg.pwwn, port->port_cfg.nwwn,
 				 bfa_fcport_get_maxfrsize(port->fcs->bfa));
@@ -3593,7 +3583,7 @@ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
 	ns->fcxp = fcxp;
 
 	len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
-			     bfa_os_hton3b(FC_NAME_SERVER),
+			     bfa_hton3b(FC_NAME_SERVER),
 			     bfa_fcs_lport_get_fcid(port), 0,
 			     port->port_cfg.pwwn, port->port_cfg.nwwn,
 				 bfa_fcport_get_maxfrsize(port->fcs->bfa));
@@ -4150,7 +4140,7 @@ bfa_fcs_lport_ns_query(struct bfa_fcs_lport_s *port)
 	bfa_sm_send_event(ns, NSSM_EVENT_NS_QUERY);
 }
 
-void
+static void
 bfa_fcs_lport_ns_boot_target_disc(bfa_fcs_lport_t *port)
 {
 
@@ -4163,7 +4153,7 @@ bfa_fcs_lport_ns_boot_target_disc(bfa_fcs_lport_t *port)
 
 	for (ii = 0 ; ii < nwwns; ++ii) {
 		rport = bfa_fcs_rport_create_by_wwn(port, wwns[ii]);
-		bfa_assert(rport);
+		WARN_ON(!rport);
 	}
 }
 
@@ -4352,8 +4342,8 @@ bfa_fcs_lport_scn_send_scr(void *scn_cbarg, struct bfa_fcxp_s *fcxp_alloced)
 	/* Handle VU registrations for Base port only */
 	if ((!port->vport) && bfa_ioc_get_fcmode(&port->fcs->bfa->ioc)) {
 		len = fc_scr_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
-				bfa_lps_is_brcd_fabric(port->fabric->lps),
-							port->pid, 0);
+				port->fabric->lps->brcd_switch,
+				port->pid, 0);
 	} else {
 	    len = fc_scr_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
 				    BFA_FALSE,
@@ -4626,7 +4616,7 @@ bfa_fcs_lport_scn_process_rscn(struct bfa_fcs_lport_s *port,
 
 
 		default:
-			bfa_assert(0);
+			WARN_ON(1);
 			nsquery = BFA_TRUE;
 		}
 	}
@@ -4672,7 +4662,7 @@ bfa_fcs_lport_get_rport(struct bfa_fcs_lport_s *port, wwn_t wwn, int index,
 
 	while ((qe != qh) && (i < nrports)) {
 		rport = (struct bfa_fcs_rport_s *) qe;
-		if (bfa_os_ntoh3b(rport->pid) > 0xFFF000) {
+		if (bfa_ntoh3b(rport->pid) > 0xFFF000) {
 			qe = bfa_q_next(qe);
 			bfa_trc(fcs, (u32) rport->pwwn);
 			bfa_trc(fcs, rport->pid);
@@ -4720,7 +4710,7 @@ bfa_fcs_lport_get_rports(struct bfa_fcs_lport_s *port,
 
 	while ((qe != qh) && (i < *nrports)) {
 		rport = (struct bfa_fcs_rport_s *) qe;
-		if (bfa_os_ntoh3b(rport->pid) > 0xFFF000) {
+		if (bfa_ntoh3b(rport->pid) > 0xFFF000) {
 			qe = bfa_q_next(qe);
 			bfa_trc(fcs, (u32) rport->pwwn);
 			bfa_trc(fcs, rport->pid);
@@ -4771,7 +4761,7 @@ bfa_fcs_lport_get_rport_max_speed(bfa_fcs_lport_t *port)
 
 	while (qe != qh) {
 		rport = (struct bfa_fcs_rport_s *) qe;
-		if ((bfa_os_ntoh3b(rport->pid) > 0xFFF000) ||
+		if ((bfa_ntoh3b(rport->pid) > 0xFFF000) ||
 			(bfa_fcs_rport_get_state(rport) ==
 			  BFA_RPORT_OFFLINE)) {
 			qe = bfa_q_next(qe);
@@ -4807,7 +4797,7 @@ bfa_fcs_lookup_port(struct bfa_fcs_s *fcs, u16 vf_id, wwn_t lpwwn)
 	struct bfa_fcs_vport_s *vport;
 	bfa_fcs_vf_t   *vf;
 
-	bfa_assert(fcs != NULL);
+	WARN_ON(fcs == NULL);
 
 	vf = bfa_fcs_vf_lookup(fcs, vf_id);
 	if (vf == NULL) {
@@ -4853,7 +4843,7 @@ bfa_fcs_lport_get_info(struct bfa_fcs_lport_s *port,
 		port_info->max_vports_supp =
 			bfa_lps_get_max_vport(port->fcs->bfa);
 		port_info->num_vports_inuse =
-			bfa_fcs_fabric_vport_count(port->fabric);
+			port->fabric->num_vports;
 		port_info->max_rports_supp = BFA_FCS_MAX_RPORTS_SUPP;
 		port_info->num_rports_inuse = port->num_rports;
 	} else {
@@ -4997,7 +4987,8 @@ bfa_fcs_vport_sm_created(struct bfa_fcs_vport_s *vport,
 
 	switch (event) {
 	case BFA_FCS_VPORT_SM_START:
-		if (bfa_fcs_fabric_is_online(__vport_fabric(vport))
+		if (bfa_sm_cmp_state(__vport_fabric(vport),
+					bfa_fcs_fabric_sm_online)
 		    && bfa_fcs_fabric_npiv_capable(__vport_fabric(vport))) {
 			bfa_sm_set_state(vport, bfa_fcs_vport_sm_fdisc);
 			bfa_fcs_vport_do_fdisc(vport);
@@ -5080,13 +5071,13 @@ bfa_fcs_vport_sm_fdisc(struct bfa_fcs_vport_s *vport,
 	switch (event) {
 	case BFA_FCS_VPORT_SM_DELETE:
 		bfa_sm_set_state(vport, bfa_fcs_vport_sm_cleanup);
-		bfa_lps_discard(vport->lps);
+		bfa_sm_send_event(vport->lps, BFA_LPS_SM_OFFLINE);
 		bfa_fcs_lport_delete(&vport->lport);
 		break;
 
 	case BFA_FCS_VPORT_SM_OFFLINE:
 		bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
-		bfa_lps_discard(vport->lps);
+		bfa_sm_send_event(vport->lps, BFA_LPS_SM_OFFLINE);
 		break;
 
 	case BFA_FCS_VPORT_SM_RSP_OK:
@@ -5166,7 +5157,7 @@ bfa_fcs_vport_sm_online(struct bfa_fcs_vport_s *vport,
 
 	case BFA_FCS_VPORT_SM_OFFLINE:
 		bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
-		bfa_lps_discard(vport->lps);
+		bfa_sm_send_event(vport->lps, BFA_LPS_SM_OFFLINE);
 		bfa_fcs_lport_offline(&vport->lport);
 		break;
 
@@ -5266,7 +5257,7 @@ bfa_fcs_vport_sm_logo(struct bfa_fcs_vport_s *vport,
 
 	switch (event) {
 	case BFA_FCS_VPORT_SM_OFFLINE:
-		bfa_lps_discard(vport->lps);
+		bfa_sm_send_event(vport->lps, BFA_LPS_SM_OFFLINE);
 		/*
 		 * !!! fall through !!!
 		 */
@@ -5305,14 +5296,14 @@ bfa_fcs_vport_do_fdisc(struct bfa_fcs_vport_s *vport)
 static void
 bfa_fcs_vport_fdisc_rejected(struct bfa_fcs_vport_s *vport)
 {
-	u8		lsrjt_rsn = bfa_lps_get_lsrjt_rsn(vport->lps);
-	u8		lsrjt_expl = bfa_lps_get_lsrjt_expl(vport->lps);
+	u8		lsrjt_rsn = vport->lps->lsrjt_rsn;
+	u8		lsrjt_expl = vport->lps->lsrjt_expl;
 
 	bfa_trc(__vport_fcs(vport), lsrjt_rsn);
 	bfa_trc(__vport_fcs(vport), lsrjt_expl);
 
 	/* For certain reason codes, we don't want to retry. */
-	switch (bfa_lps_get_lsrjt_expl(vport->lps)) {
+	switch (vport->lps->lsrjt_expl) {
 	case FC_LS_RJT_EXP_INV_PORT_NAME: /* by brocade */
 	case FC_LS_RJT_EXP_INVALID_NPORT_ID: /* by Cisco */
 		if (vport->fdisc_retries < BFA_FCS_VPORT_MAX_RETRIES)
@@ -5476,7 +5467,7 @@ bfa_fcs_vport_create(struct bfa_fcs_vport_s *vport, struct bfa_fcs_s *fcs,
 	if (bfa_fcs_vport_lookup(fcs, vf_id, vport_cfg->pwwn) != NULL)
 		return BFA_STATUS_VPORT_EXISTS;
 
-	if (bfa_fcs_fabric_vport_count(&fcs->fabric) ==
+	if (fcs->fabric.num_vports ==
 			bfa_lps_get_max_vport(fcs->bfa))
 		return BFA_STATUS_VPORT_MAX;
 
@@ -5618,33 +5609,6 @@ bfa_fcs_vport_get_attr(struct bfa_fcs_vport_s *vport,
 	attr->vport_state = bfa_sm_to_state(vport_sm_table, vport->sm);
 }
 
-/*
- *	Use this function to get vport's statistics.
- *
- *	param[in]	vport	pointer to bfa_fcs_vport_t.
- *	param[out]	stats	pointer to return vport statistics in
- *
- *	return None
- */
-void
-bfa_fcs_vport_get_stats(struct bfa_fcs_vport_s *vport,
-			struct bfa_vport_stats_s *stats)
-{
-	*stats = vport->vport_stats;
-}
-
-/*
- *	Use this function to clear vport's statistics.
- *
- *	param[in]	vport	pointer to bfa_fcs_vport_t.
- *
- *	return None
- */
-void
-bfa_fcs_vport_clr_stats(struct bfa_fcs_vport_s *vport)
-{
-	memset(&vport->vport_stats, 0, sizeof(struct bfa_vport_stats_s));
-}
 
 /*
  *	Lookup a virtual port. Excludes base port from lookup.
@@ -5684,7 +5648,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
 		/*
 		 * Initialiaze the V-Port fields
 		 */
-		__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
+		__vport_fcid(vport) = vport->lps->lp_pid;
 		vport->vport_stats.fdisc_accepts++;
 		bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_OK);
 		break;
@@ -5697,7 +5661,7 @@ bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
 		break;
 
 	case BFA_STATUS_EPROTOCOL:
-		switch (bfa_lps_get_extstatus(vport->lps)) {
+		switch (vport->lps->ext_status) {
 		case BFA_EPROTO_BAD_ACCEPT:
 			vport->vport_stats.fdisc_acc_bad++;
 			break;
diff --git a/drivers/scsi/bfa/bfa_fcs_rport.c b/drivers/scsi/bfa/bfa_fcs_rport.c
index 47f35c0ef29..caaee6f0693 100644
--- a/drivers/scsi/bfa/bfa_fcs_rport.c
+++ b/drivers/scsi/bfa/bfa_fcs_rport.c
@@ -19,9 +19,9 @@
  *  rport.c Remote port implementation.
  */
 
+#include "bfad_drv.h"
 #include "bfa_fcs.h"
 #include "bfa_fcbuild.h"
-#include "bfad_drv.h"
 
 BFA_TRC_FILE(FCS, RPORT);
 
@@ -75,30 +75,6 @@ static void	bfa_fcs_rport_send_ls_rjt(struct bfa_fcs_rport_s *rport,
 static void	bfa_fcs_rport_process_adisc(struct bfa_fcs_rport_s *rport,
 				struct fchs_s *rx_fchs, u16 len);
 static void bfa_fcs_rport_send_prlo_acc(struct bfa_fcs_rport_s *rport);
-/*
- *  fcs_rport_sm FCS rport state machine events
- */
-
-enum rport_event {
-	RPSM_EVENT_PLOGI_SEND	= 1,	/*  new rport; start with PLOGI */
-	RPSM_EVENT_PLOGI_RCVD	= 2,	/*  Inbound PLOGI from remote port */
-	RPSM_EVENT_PLOGI_COMP	= 3,	/*  PLOGI completed to rport	*/
-	RPSM_EVENT_LOGO_RCVD	= 4,	/*  LOGO from remote device	*/
-	RPSM_EVENT_LOGO_IMP	= 5,	/*  implicit logo for SLER	*/
-	RPSM_EVENT_FCXP_SENT	= 6,	/*  Frame from has been sent	*/
-	RPSM_EVENT_DELETE	= 7,	/*  RPORT delete request	*/
-	RPSM_EVENT_SCN		= 8,	/*  state change notification	*/
-	RPSM_EVENT_ACCEPTED	= 9,	/*  Good response from remote device */
-	RPSM_EVENT_FAILED	= 10,	/*  Request to rport failed.	*/
-	RPSM_EVENT_TIMEOUT	= 11,	/*  Rport SM timeout event	*/
-	RPSM_EVENT_HCB_ONLINE  = 12,	/*  BFA rport online callback	*/
-	RPSM_EVENT_HCB_OFFLINE = 13,	/*  BFA rport offline callback	*/
-	RPSM_EVENT_FC4_OFFLINE = 14,	/*  FC-4 offline complete	*/
-	RPSM_EVENT_ADDRESS_CHANGE = 15,	/*  Rport's PID has changed	*/
-	RPSM_EVENT_ADDRESS_DISC = 16,	/*  Need to Discover rport's PID */
-	RPSM_EVENT_PRLO_RCVD   = 17,	/*  PRLO from remote device	*/
-	RPSM_EVENT_PLOGI_RETRY = 18,	/*  Retry PLOGI continously */
-};
 
 static void	bfa_fcs_rport_sm_uninit(struct bfa_fcs_rport_s *rport,
 					enum rport_event event);
@@ -498,24 +474,24 @@ bfa_fcs_rport_sm_hal_online(struct bfa_fcs_rport_s *rport,
 
 	case RPSM_EVENT_LOGO_RCVD:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logorcv);
-		bfa_rport_offline(rport->bfa_rport);
+		bfa_sm_send_event(rport->bfa_rport, BFA_RPORT_SM_OFFLINE);
 		break;
 
 	case RPSM_EVENT_LOGO_IMP:
 	case RPSM_EVENT_ADDRESS_CHANGE:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_offline);
-		bfa_rport_offline(rport->bfa_rport);
+		bfa_sm_send_event(rport->bfa_rport, BFA_RPORT_SM_OFFLINE);
 		break;
 
 	case RPSM_EVENT_PLOGI_RCVD:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
-		bfa_rport_offline(rport->bfa_rport);
+		bfa_sm_send_event(rport->bfa_rport, BFA_RPORT_SM_OFFLINE);
 		bfa_fcs_rport_send_plogiacc(rport, NULL);
 		break;
 
 	case RPSM_EVENT_DELETE:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logosend);
-		bfa_rport_offline(rport->bfa_rport);
+		bfa_sm_send_event(rport->bfa_rport, BFA_RPORT_SM_OFFLINE);
 		break;
 
 	case RPSM_EVENT_SCN:
@@ -824,7 +800,7 @@ bfa_fcs_rport_sm_fc4_logorcv(struct bfa_fcs_rport_s *rport,
 	switch (event) {
 	case RPSM_EVENT_FC4_OFFLINE:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logorcv);
-		bfa_rport_offline(rport->bfa_rport);
+		bfa_sm_send_event(rport->bfa_rport, BFA_RPORT_SM_OFFLINE);
 		break;
 
 	case RPSM_EVENT_DELETE:
@@ -856,7 +832,7 @@ bfa_fcs_rport_sm_fc4_logosend(struct bfa_fcs_rport_s *rport,
 	switch (event) {
 	case RPSM_EVENT_FC4_OFFLINE:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logosend);
-		bfa_rport_offline(rport->bfa_rport);
+		bfa_sm_send_event(rport->bfa_rport, BFA_RPORT_SM_OFFLINE);
 		break;
 
 	default:
@@ -878,7 +854,7 @@ bfa_fcs_rport_sm_fc4_offline(struct bfa_fcs_rport_s *rport,
 	switch (event) {
 	case RPSM_EVENT_FC4_OFFLINE:
 		bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_offline);
-		bfa_rport_offline(rport->bfa_rport);
+		bfa_sm_send_event(rport->bfa_rport, BFA_RPORT_SM_OFFLINE);
 		break;
 
 	case RPSM_EVENT_SCN:
@@ -1459,7 +1435,7 @@ bfa_fcs_rport_plogi_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
 			twin->stats.plogi_rcvd	  += rport->stats.plogi_rcvd;
 			twin->stats.plogi_accs++;
 
-			bfa_fcs_rport_delete(rport);
+			bfa_sm_send_event(rport, RPSM_EVENT_DELETE);
 
 			bfa_fcs_rport_update(twin, plogi_rsp);
 			twin->pid = rsp_fchs->s_id;
@@ -1992,13 +1968,14 @@ bfa_fcs_rport_alloc(struct bfa_fcs_lport_s *port, wwn_t pwwn, u32 rpid)
 	/*
 	 * allocate FC-4s
 	 */
-	bfa_assert(bfa_fcs_lport_is_initiator(port));
+	WARN_ON(!bfa_fcs_lport_is_initiator(port));
 
 	if (bfa_fcs_lport_is_initiator(port)) {
 		rport->itnim = bfa_fcs_itnim_create(rport);
 		if (!rport->itnim) {
 			bfa_trc(fcs, rpid);
-			bfa_rport_delete(rport->bfa_rport);
+			bfa_sm_send_event(rport->bfa_rport,
+						BFA_RPORT_SM_DELETE);
 			kfree(rport_drv);
 			return NULL;
 		}
@@ -2032,7 +2009,7 @@ bfa_fcs_rport_free(struct bfa_fcs_rport_s *rport)
 			bfa_fcs_rpf_rport_offline(rport);
 	}
 
-	bfa_rport_delete(rport->bfa_rport);
+	bfa_sm_send_event(rport->bfa_rport, BFA_RPORT_SM_DELETE);
 	bfa_fcs_lport_del_rport(port, rport);
 	kfree(rport->rp_drv);
 }
@@ -2056,7 +2033,7 @@ bfa_fcs_rport_online_action(struct bfa_fcs_rport_s *rport)
 	wwn2str(lpwwn_buf, bfa_fcs_lport_get_pwwn(port));
 	wwn2str(rpwwn_buf, rport->pwwn);
 	if (!BFA_FCS_PID_IS_WKA(rport->pid))
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 		"Remote port (WWN = %s) online for logical port (WWN = %s)\n",
 		rpwwn_buf, lpwwn_buf);
 }
@@ -2075,12 +2052,12 @@ bfa_fcs_rport_offline_action(struct bfa_fcs_rport_s *rport)
 	wwn2str(rpwwn_buf, rport->pwwn);
 	if (!BFA_FCS_PID_IS_WKA(rport->pid)) {
 		if (bfa_fcs_lport_is_online(rport->port) == BFA_TRUE)
-			BFA_LOG(KERN_ERR, bfad, log_level,
+			BFA_LOG(KERN_ERR, bfad, bfa_log_level,
 				"Remote port (WWN = %s) connectivity lost for "
 				"logical port (WWN = %s)\n",
 				rpwwn_buf, lpwwn_buf);
 		else
-			BFA_LOG(KERN_INFO, bfad, log_level,
+			BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 				"Remote port (WWN = %s) offlined by "
 				"logical port (WWN = %s)\n",
 				rpwwn_buf, lpwwn_buf);
@@ -2307,40 +2284,8 @@ bfa_fcs_rport_plogi(struct bfa_fcs_rport_s *rport, struct fchs_s *rx_fchs,
 	bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_RCVD);
 }
 
-/*
- * Called by bport/vport to delete a remote port instance.
- *
- * Rport delete is called under the following conditions:
- *		- vport is deleted
- *		- vf is deleted
- *		- explicit request from OS to delete rport
- */
-void
-bfa_fcs_rport_delete(struct bfa_fcs_rport_s *rport)
-{
-	bfa_sm_send_event(rport, RPSM_EVENT_DELETE);
-}
 
 /*
- * Called by bport/vport to  when a target goes offline.
- *
- */
-void
-bfa_fcs_rport_offline(struct bfa_fcs_rport_s *rport)
-{
-	bfa_sm_send_event(rport, RPSM_EVENT_LOGO_IMP);
-}
-
-/*
- * Called by bport in n2n when a target (attached port) becomes online.
- *
- */
-void
-bfa_fcs_rport_online(struct bfa_fcs_rport_s *rport)
-{
-	bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_SEND);
-}
-/*
  *	Called by bport/vport to notify SCN for the remote port
  */
 void
@@ -2350,23 +2295,6 @@ bfa_fcs_rport_scn(struct bfa_fcs_rport_s *rport)
 	bfa_sm_send_event(rport, RPSM_EVENT_SCN);
 }
 
-/*
- *	Called by	fcpim to notify that the ITN cleanup is done.
- */
-void
-bfa_fcs_rport_itnim_ack(struct bfa_fcs_rport_s *rport)
-{
-	bfa_sm_send_event(rport, RPSM_EVENT_FC4_OFFLINE);
-}
-
-/*
- *	Called by fcptm to notify that the ITN cleanup is done.
- */
-void
-bfa_fcs_rport_tin_ack(struct bfa_fcs_rport_s *rport)
-{
-	bfa_sm_send_event(rport, RPSM_EVENT_FC4_OFFLINE);
-}
 
 /*
  *	brief
@@ -2465,15 +2393,6 @@ bfa_cb_rport_qos_scn_prio(void *cbarg,
  *		Called to process any unsolicted frames from this remote port
  */
 void
-bfa_fcs_rport_logo_imp(struct bfa_fcs_rport_s *rport)
-{
-	bfa_sm_send_event(rport, RPSM_EVENT_LOGO_IMP);
-}
-
-/*
- *		Called to process any unsolicted frames from this remote port
- */
-void
 bfa_fcs_rport_uf_recv(struct bfa_fcs_rport_s *rport,
 			struct fchs_s *fchs, u16 len)
 {
@@ -2586,6 +2505,7 @@ bfa_fcs_rport_get_state(struct bfa_fcs_rport_s *rport)
 	return bfa_sm_to_state(rport_sm_table, rport->sm);
 }
 
+
 /*
  *	brief
  *		 Called by the Driver to set rport delete/ageout timeout
@@ -2602,7 +2522,7 @@ bfa_fcs_rport_set_del_timeout(u8 rport_tmo)
 		bfa_fcs_rport_del_timeout = rport_tmo * 1000;
 }
 void
-bfa_fcs_rport_prlo(struct bfa_fcs_rport_s *rport, u16 ox_id)
+bfa_fcs_rport_prlo(struct bfa_fcs_rport_s *rport, __be16 ox_id)
 {
 	bfa_trc(rport->fcs, rport->pid);
 
@@ -2621,106 +2541,6 @@ bfa_fcs_rport_prlo(struct bfa_fcs_rport_s *rport, u16 ox_id)
  *  fcs_rport_api FCS rport API.
  */
 
-/*
- *	Direct API to add a target by port wwn. This interface is used, for
- *	example, by bios when target pwwn is known from boot lun configuration.
- */
-bfa_status_t
-bfa_fcs_rport_add(struct bfa_fcs_lport_s *port, wwn_t *pwwn,
-		struct bfa_fcs_rport_s *rport, struct bfad_rport_s *rport_drv)
-{
-	bfa_trc(port->fcs, *pwwn);
-
-	return BFA_STATUS_OK;
-}
-
-/*
- *	Direct API to remove a target and its associated resources. This
- *	interface is used, for example, by driver to remove target
- *	ports from the target list for a VM.
- */
-bfa_status_t
-bfa_fcs_rport_remove(struct bfa_fcs_rport_s *rport_in)
-{
-
-	struct bfa_fcs_rport_s *rport;
-
-	bfa_trc(rport_in->fcs, rport_in->pwwn);
-
-	rport = bfa_fcs_lport_get_rport_by_pwwn(rport_in->port, rport_in->pwwn);
-	if (rport == NULL) {
-		/*
-		 * TBD Error handling
-		 */
-		bfa_trc(rport_in->fcs, rport_in->pid);
-		return BFA_STATUS_UNKNOWN_RWWN;
-	}
-
-	/*
-	 * TBD if this remote port is online, send a logo
-	 */
-	return BFA_STATUS_OK;
-
-}
-
-/*
- *	Remote device status for display/debug.
- */
-void
-bfa_fcs_rport_get_attr(struct bfa_fcs_rport_s *rport,
-			struct bfa_rport_attr_s *rport_attr)
-{
-	struct bfa_rport_qos_attr_s qos_attr;
-	bfa_fcs_lport_t *port = rport->port;
-	bfa_port_speed_t rport_speed = rport->rpf.rpsc_speed;
-
-	memset(rport_attr, 0, sizeof(struct bfa_rport_attr_s));
-
-	rport_attr->pid = rport->pid;
-	rport_attr->pwwn = rport->pwwn;
-	rport_attr->nwwn = rport->nwwn;
-	rport_attr->cos_supported = rport->fc_cos;
-	rport_attr->df_sz = rport->maxfrsize;
-	rport_attr->state = bfa_fcs_rport_get_state(rport);
-	rport_attr->fc_cos = rport->fc_cos;
-	rport_attr->cisc = rport->cisc;
-	rport_attr->scsi_function = rport->scsi_function;
-	rport_attr->curr_speed  = rport->rpf.rpsc_speed;
-	rport_attr->assigned_speed  = rport->rpf.assigned_speed;
-
-	bfa_rport_get_qos_attr(rport->bfa_rport, &qos_attr);
-	rport_attr->qos_attr = qos_attr;
-
-	rport_attr->trl_enforced = BFA_FALSE;
-	if (bfa_fcport_is_ratelim(port->fcs->bfa)) {
-		if (rport_speed == BFA_PORT_SPEED_UNKNOWN) {
-			/* Use default ratelim speed setting */
-			rport_speed =
-				bfa_fcport_get_ratelim_speed(rport->fcs->bfa);
-		}
-
-		if (rport_speed < bfa_fcs_lport_get_rport_max_speed(port))
-			rport_attr->trl_enforced = BFA_TRUE;
-	}
-}
-
-/*
- *	Per remote device statistics.
- */
-void
-bfa_fcs_rport_get_stats(struct bfa_fcs_rport_s *rport,
-			struct bfa_rport_stats_s *stats)
-{
-	*stats = rport->stats;
-}
-
-void
-bfa_fcs_rport_clear_stats(struct bfa_fcs_rport_s *rport)
-{
-	memset((char *)&rport->stats, 0,
-			sizeof(struct bfa_rport_stats_s));
-}
-
 struct bfa_fcs_rport_s *
 bfa_fcs_rport_lookup(struct bfa_fcs_lport_s *port, wwn_t rpwwn)
 {
@@ -2752,22 +2572,6 @@ bfa_fcs_rport_lookup_by_nwwn(struct bfa_fcs_lport_s *port, wwn_t rnwwn)
 }
 
 /*
- * This API is to set the Rport's speed. Should be used when RPSC is not
- * supported by the rport.
- */
-void
-bfa_fcs_rport_set_speed(struct bfa_fcs_rport_s *rport, bfa_port_speed_t speed)
-{
-	rport->rpf.assigned_speed  = speed;
-
-	/* Set this speed in f/w only if the RPSC speed is not available */
-	if (rport->rpf.rpsc_speed == BFA_PORT_SPEED_UNKNOWN)
-		bfa_rport_speed(rport->bfa_rport, speed);
-}
-
-
-
-/*
  * Remote port features (RPF) implementation.
  */
 
@@ -2827,7 +2631,7 @@ bfa_fcs_rpf_sm_uninit(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
 	case RPFSM_EVENT_RPORT_ONLINE:
 		/* Send RPSC2 to a Brocade fabric only. */
 		if ((!BFA_FCS_PID_IS_WKA(rport->pid)) &&
-			((bfa_lps_is_brcd_fabric(rport->port->fabric->lps)) ||
+			((rport->port->fabric->lps->brcd_switch) ||
 			(bfa_fcs_fabric_get_switch_oui(fabric) ==
 						BFA_FCS_BRCD_SWITCH_OUI))) {
 			bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_sending);
@@ -3093,7 +2897,7 @@ bfa_fcs_rpf_rpsc2_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
 		num_ents = be16_to_cpu(rpsc2_acc->num_pids);
 		bfa_trc(rport->fcs, num_ents);
 		if (num_ents > 0) {
-			bfa_assert(rpsc2_acc->port_info[0].pid != rport->pid);
+			WARN_ON(rpsc2_acc->port_info[0].pid == rport->pid);
 			bfa_trc(rport->fcs,
 				be16_to_cpu(rpsc2_acc->port_info[0].pid));
 			bfa_trc(rport->fcs,
diff --git a/drivers/scsi/bfa/bfa_hw_cb.c b/drivers/scsi/bfa/bfa_hw_cb.c
index d8464ae6007..977e681ec80 100644
--- a/drivers/scsi/bfa/bfa_hw_cb.c
+++ b/drivers/scsi/bfa/bfa_hw_cb.c
@@ -15,6 +15,7 @@
  * General Public License for more details.
  */
 
+#include "bfad_drv.h"
 #include "bfa_modules.h"
 #include "bfi_cbreg.h"
 
@@ -110,7 +111,7 @@ bfa_hwcb_msix_init(struct bfa_s *bfa, int nvecs)
 {
 	int i;
 
-	bfa_assert((nvecs == 1) || (nvecs == __HFN_NUMINTS));
+	WARN_ON((nvecs != 1) && (nvecs != __HFN_NUMINTS));
 
 	bfa->msix.nvecs = nvecs;
 	if (nvecs == 1) {
diff --git a/drivers/scsi/bfa/bfa_hw_ct.c b/drivers/scsi/bfa/bfa_hw_ct.c
index b0efbc713ff..21018d98a07 100644
--- a/drivers/scsi/bfa/bfa_hw_ct.c
+++ b/drivers/scsi/bfa/bfa_hw_ct.c
@@ -15,6 +15,7 @@
  * General Public License for more details.
  */
 
+#include "bfad_drv.h"
 #include "bfa_modules.h"
 #include "bfi_ctreg.h"
 
@@ -116,7 +117,7 @@ bfa_hwct_msix_getvecs(struct bfa_s *bfa, u32 *msix_vecs_bmap,
 void
 bfa_hwct_msix_init(struct bfa_s *bfa, int nvecs)
 {
-	bfa_assert((nvecs == 1) || (nvecs == BFA_MSIX_CT_MAX));
+	WARN_ON((nvecs != 1) && (nvecs != BFA_MSIX_CT_MAX));
 	bfa_trc(bfa, nvecs);
 
 	bfa->msix.nvecs = nvecs;
@@ -143,7 +144,7 @@ bfa_hwct_msix_install(struct bfa_s *bfa)
 	for (; i <= BFA_MSIX_RME_Q3; i++)
 		bfa->msix.handler[i] = bfa_msix_rspq;
 
-	bfa_assert(i == BFA_MSIX_LPU_ERR);
+	WARN_ON(i != BFA_MSIX_LPU_ERR);
 	bfa->msix.handler[BFA_MSIX_LPU_ERR] = bfa_msix_lpu_err;
 }
 
diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c
index 54475b53a5a..c1f72c49196 100644
--- a/drivers/scsi/bfa/bfa_ioc.c
+++ b/drivers/scsi/bfa/bfa_ioc.c
@@ -15,11 +15,11 @@
  * General Public License for more details.
  */
 
+#include "bfad_drv.h"
 #include "bfa_ioc.h"
 #include "bfi_ctreg.h"
 #include "bfa_defs.h"
 #include "bfa_defs_svc.h"
-#include "bfad_drv.h"
 
 BFA_TRC_FILE(CNA, IOC);
 
@@ -29,7 +29,7 @@ BFA_TRC_FILE(CNA, IOC);
 #define BFA_IOC_TOV		3000	/* msecs */
 #define BFA_IOC_HWSEM_TOV	500	/* msecs */
 #define BFA_IOC_HB_TOV		500	/* msecs */
-#define BFA_IOC_HWINIT_MAX	2
+#define BFA_IOC_HWINIT_MAX	5
 #define BFA_IOC_TOV_RECOVER	 BFA_IOC_HB_TOV
 
 #define bfa_ioc_timer_start(__ioc)					\
@@ -42,11 +42,6 @@ BFA_TRC_FILE(CNA, IOC);
 			bfa_ioc_hb_check, (__ioc), BFA_IOC_HB_TOV)
 #define bfa_hb_timer_stop(__ioc)	bfa_timer_stop(&(__ioc)->hb_timer)
 
-#define BFA_DBG_FWTRC_ENTS	(BFI_IOC_TRC_ENTS)
-#define BFA_DBG_FWTRC_LEN					\
-	(BFA_DBG_FWTRC_ENTS * sizeof(struct bfa_trc_s) +	\
-	 (sizeof(struct bfa_trc_mod_s) -			\
-	  BFA_TRC_MAX * sizeof(struct bfa_trc_s)))
 #define BFA_DBG_FWTRC_OFF(_fn)	(BFI_IOC_TRC_OFF + BFA_DBG_FWTRC_LEN * (_fn))
 
 /*
@@ -59,17 +54,16 @@ BFA_TRC_FILE(CNA, IOC);
 			((__ioc)->ioc_hwif->ioc_firmware_unlock(__ioc))
 #define bfa_ioc_reg_init(__ioc) ((__ioc)->ioc_hwif->ioc_reg_init(__ioc))
 #define bfa_ioc_map_port(__ioc) ((__ioc)->ioc_hwif->ioc_map_port(__ioc))
-#define bfa_ioc_notify_hbfail(__ioc)			\
-			((__ioc)->ioc_hwif->ioc_notify_hbfail(__ioc))
-
-#ifdef BFA_IOC_IS_UEFI
-#define bfa_ioc_is_bios_optrom(__ioc) (0)
-#define bfa_ioc_is_uefi(__ioc) BFA_IOC_IS_UEFI
-#else
-#define bfa_ioc_is_bios_optrom(__ioc)	\
-	(bfa_cb_image_get_size(BFA_IOC_FWIMG_TYPE(__ioc)) < BFA_IOC_FWIMG_MINSZ)
-#define bfa_ioc_is_uefi(__ioc) (0)
-#endif
+#define bfa_ioc_notify_fail(__ioc)              \
+			((__ioc)->ioc_hwif->ioc_notify_fail(__ioc))
+#define bfa_ioc_sync_join(__ioc)                \
+			((__ioc)->ioc_hwif->ioc_sync_join(__ioc))
+#define bfa_ioc_sync_leave(__ioc)               \
+			((__ioc)->ioc_hwif->ioc_sync_leave(__ioc))
+#define bfa_ioc_sync_ack(__ioc)                 \
+			((__ioc)->ioc_hwif->ioc_sync_ack(__ioc))
+#define bfa_ioc_sync_complete(__ioc)            \
+			((__ioc)->ioc_hwif->ioc_sync_complete(__ioc))
 
 #define bfa_ioc_mbox_cmd_pending(__ioc)		\
 			(!list_empty(&((__ioc)->mbox_mod.cmd_q)) || \
@@ -81,29 +75,22 @@ bfa_boolean_t bfa_auto_recover = BFA_TRUE;
  * forward declarations
  */
 static void bfa_ioc_hw_sem_get(struct bfa_ioc_s *ioc);
-static void bfa_ioc_hw_sem_get_cancel(struct bfa_ioc_s *ioc);
 static void bfa_ioc_hwinit(struct bfa_ioc_s *ioc, bfa_boolean_t force);
 static void bfa_ioc_timeout(void *ioc);
 static void bfa_ioc_send_enable(struct bfa_ioc_s *ioc);
 static void bfa_ioc_send_disable(struct bfa_ioc_s *ioc);
 static void bfa_ioc_send_getattr(struct bfa_ioc_s *ioc);
 static void bfa_ioc_hb_monitor(struct bfa_ioc_s *ioc);
-static void bfa_ioc_hb_stop(struct bfa_ioc_s *ioc);
-static void bfa_ioc_reset(struct bfa_ioc_s *ioc, bfa_boolean_t force);
 static void bfa_ioc_mbox_poll(struct bfa_ioc_s *ioc);
 static void bfa_ioc_mbox_hbfail(struct bfa_ioc_s *ioc);
 static void bfa_ioc_recover(struct bfa_ioc_s *ioc);
 static void bfa_ioc_check_attr_wwns(struct bfa_ioc_s *ioc);
 static void bfa_ioc_disable_comp(struct bfa_ioc_s *ioc);
 static void bfa_ioc_lpu_stop(struct bfa_ioc_s *ioc);
-static void bfa_ioc_pf_enabled(struct bfa_ioc_s *ioc);
-static void bfa_ioc_pf_disabled(struct bfa_ioc_s *ioc);
-static void bfa_ioc_pf_failed(struct bfa_ioc_s *ioc);
+static void bfa_ioc_debug_save_ftrc(struct bfa_ioc_s *ioc);
+static void bfa_ioc_fail_notify(struct bfa_ioc_s *ioc);
 static void bfa_ioc_pf_fwmismatch(struct bfa_ioc_s *ioc);
 
-/*
- *  hal_ioc_sm
- */
 
 /*
  * IOC state machine definitions/declarations
@@ -116,10 +103,11 @@ enum ioc_event {
 	IOC_E_ENABLED		= 5,	/*  f/w enabled		*/
 	IOC_E_FWRSP_GETATTR	= 6,	/*  IOC get attribute response	*/
 	IOC_E_DISABLED		= 7,	/*  f/w disabled		*/
-	IOC_E_FAILED		= 8,	/*  failure notice by iocpf sm	*/
-	IOC_E_HBFAIL		= 9,	/*  heartbeat failure		*/
-	IOC_E_HWERROR		= 10,	/*  hardware error interrupt	*/
-	IOC_E_TIMEOUT		= 11,	/*  timeout			*/
+	IOC_E_INITFAILED	= 8,	/*  failure notice by iocpf sm	*/
+	IOC_E_PFFAILED		= 9,	/*  failure notice by iocpf sm	*/
+	IOC_E_HBFAIL		= 10,	/*  heartbeat failure		*/
+	IOC_E_HWERROR		= 11,	/*  hardware error interrupt	*/
+	IOC_E_TIMEOUT		= 12,	/*  timeout			*/
 };
 
 bfa_fsm_state_decl(bfa_ioc, uninit, struct bfa_ioc_s, enum ioc_event);
@@ -127,7 +115,7 @@ bfa_fsm_state_decl(bfa_ioc, reset, struct bfa_ioc_s, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, enabling, struct bfa_ioc_s, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, getattr, struct bfa_ioc_s, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, op, struct bfa_ioc_s, enum ioc_event);
-bfa_fsm_state_decl(bfa_ioc, initfail, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, fail_retry, struct bfa_ioc_s, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, fail, struct bfa_ioc_s, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, disabling, struct bfa_ioc_s, enum ioc_event);
 bfa_fsm_state_decl(bfa_ioc, disabled, struct bfa_ioc_s, enum ioc_event);
@@ -138,7 +126,7 @@ static struct bfa_sm_table_s ioc_sm_table[] = {
 	{BFA_SM(bfa_ioc_sm_enabling), BFA_IOC_ENABLING},
 	{BFA_SM(bfa_ioc_sm_getattr), BFA_IOC_GETATTR},
 	{BFA_SM(bfa_ioc_sm_op), BFA_IOC_OPERATIONAL},
-	{BFA_SM(bfa_ioc_sm_initfail), BFA_IOC_INITFAIL},
+	{BFA_SM(bfa_ioc_sm_fail_retry), BFA_IOC_INITFAIL},
 	{BFA_SM(bfa_ioc_sm_fail), BFA_IOC_FAIL},
 	{BFA_SM(bfa_ioc_sm_disabling), BFA_IOC_DISABLING},
 	{BFA_SM(bfa_ioc_sm_disabled), BFA_IOC_DISABLED},
@@ -165,12 +153,6 @@ static struct bfa_sm_table_s ioc_sm_table[] = {
 /*
  * Forward declareations for iocpf state machine
  */
-static void bfa_iocpf_enable(struct bfa_ioc_s *ioc);
-static void bfa_iocpf_disable(struct bfa_ioc_s *ioc);
-static void bfa_iocpf_fail(struct bfa_ioc_s *ioc);
-static void bfa_iocpf_initfail(struct bfa_ioc_s *ioc);
-static void bfa_iocpf_getattrfail(struct bfa_ioc_s *ioc);
-static void bfa_iocpf_stop(struct bfa_ioc_s *ioc);
 static void bfa_iocpf_timeout(void *ioc_arg);
 static void bfa_iocpf_sem_timeout(void *ioc_arg);
 
@@ -213,9 +195,14 @@ bfa_fsm_state_decl(bfa_iocpf, semwait, struct bfa_iocpf_s, enum iocpf_event);
 bfa_fsm_state_decl(bfa_iocpf, hwinit, struct bfa_iocpf_s, enum iocpf_event);
 bfa_fsm_state_decl(bfa_iocpf, enabling, struct bfa_iocpf_s, enum iocpf_event);
 bfa_fsm_state_decl(bfa_iocpf, ready, struct bfa_iocpf_s, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, initfail_sync, struct bfa_iocpf_s,
+						enum iocpf_event);
 bfa_fsm_state_decl(bfa_iocpf, initfail, struct bfa_iocpf_s, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, fail_sync, struct bfa_iocpf_s, enum iocpf_event);
 bfa_fsm_state_decl(bfa_iocpf, fail, struct bfa_iocpf_s, enum iocpf_event);
 bfa_fsm_state_decl(bfa_iocpf, disabling, struct bfa_iocpf_s, enum iocpf_event);
+bfa_fsm_state_decl(bfa_iocpf, disabling_sync, struct bfa_iocpf_s,
+						enum iocpf_event);
 bfa_fsm_state_decl(bfa_iocpf, disabled, struct bfa_iocpf_s, enum iocpf_event);
 
 static struct bfa_sm_table_s iocpf_sm_table[] = {
@@ -226,9 +213,12 @@ static struct bfa_sm_table_s iocpf_sm_table[] = {
 	{BFA_SM(bfa_iocpf_sm_hwinit), BFA_IOCPF_HWINIT},
 	{BFA_SM(bfa_iocpf_sm_enabling), BFA_IOCPF_HWINIT},
 	{BFA_SM(bfa_iocpf_sm_ready), BFA_IOCPF_READY},
+	{BFA_SM(bfa_iocpf_sm_initfail_sync), BFA_IOCPF_INITFAIL},
 	{BFA_SM(bfa_iocpf_sm_initfail), BFA_IOCPF_INITFAIL},
+	{BFA_SM(bfa_iocpf_sm_fail_sync), BFA_IOCPF_FAIL},
 	{BFA_SM(bfa_iocpf_sm_fail), BFA_IOCPF_FAIL},
 	{BFA_SM(bfa_iocpf_sm_disabling), BFA_IOCPF_DISABLING},
+	{BFA_SM(bfa_iocpf_sm_disabling_sync), BFA_IOCPF_DISABLING},
 	{BFA_SM(bfa_iocpf_sm_disabled), BFA_IOCPF_DISABLED},
 };
 
@@ -301,7 +291,7 @@ bfa_ioc_sm_reset(struct bfa_ioc_s *ioc, enum ioc_event event)
 static void
 bfa_ioc_sm_enabling_entry(struct bfa_ioc_s *ioc)
 {
-	bfa_iocpf_enable(ioc);
+	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_ENABLE);
 }
 
 /*
@@ -318,13 +308,13 @@ bfa_ioc_sm_enabling(struct bfa_ioc_s *ioc, enum ioc_event event)
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_getattr);
 		break;
 
-	case IOC_E_FAILED:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
-		break;
-
+	case IOC_E_PFFAILED:
+		/* !!! fall through !!! */
 	case IOC_E_HWERROR:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
-		bfa_iocpf_initfail(ioc);
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail_retry);
+		if (event != IOC_E_PFFAILED)
+			bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_INITFAIL);
 		break;
 
 	case IOC_E_DISABLE:
@@ -333,7 +323,7 @@ bfa_ioc_sm_enabling(struct bfa_ioc_s *ioc, enum ioc_event event)
 
 	case IOC_E_DETACH:
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
-		bfa_iocpf_stop(ioc);
+		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_STOP);
 		break;
 
 	case IOC_E_ENABLE:
@@ -367,18 +357,16 @@ bfa_ioc_sm_getattr(struct bfa_ioc_s *ioc, enum ioc_event event)
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_op);
 		break;
 
-	case IOC_E_FAILED:
-		bfa_ioc_timer_stop(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
 		break;
-
+	case IOC_E_PFFAILED:
 	case IOC_E_HWERROR:
 		bfa_ioc_timer_stop(ioc);
-		/* fall through */
-
+		/* !!! fall through !!! */
 	case IOC_E_TIMEOUT:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
-		bfa_iocpf_getattrfail(ioc);
+		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail_retry);
+		if (event != IOC_E_PFFAILED)
+			bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_GETATTRFAIL);
 		break;
 
 	case IOC_E_DISABLE:
@@ -402,7 +390,7 @@ bfa_ioc_sm_op_entry(struct bfa_ioc_s *ioc)
 
 	ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_OK);
 	bfa_ioc_hb_monitor(ioc);
-	BFA_LOG(KERN_INFO, bfad, log_level, "IOC enabled\n");
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level, "IOC enabled\n");
 }
 
 static void
@@ -415,22 +403,24 @@ bfa_ioc_sm_op(struct bfa_ioc_s *ioc, enum ioc_event event)
 		break;
 
 	case IOC_E_DISABLE:
-		bfa_ioc_hb_stop(ioc);
+		bfa_hb_timer_stop(ioc);
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
 		break;
 
-	case IOC_E_FAILED:
-		bfa_ioc_hb_stop(ioc);
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
-		break;
-
+	case IOC_E_PFFAILED:
 	case IOC_E_HWERROR:
-		bfa_ioc_hb_stop(ioc);
+		bfa_hb_timer_stop(ioc);
 		/* !!! fall through !!! */
-
 	case IOC_E_HBFAIL:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
-		bfa_iocpf_fail(ioc);
+		bfa_ioc_fail_notify(ioc);
+
+		if (ioc->iocpf.auto_recover)
+			bfa_fsm_set_state(ioc, bfa_ioc_sm_fail_retry);
+		else
+			bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
+
+		if (event != IOC_E_PFFAILED)
+			bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_FAIL);
 		break;
 
 	default:
@@ -443,8 +433,8 @@ static void
 bfa_ioc_sm_disabling_entry(struct bfa_ioc_s *ioc)
 {
 	struct bfad_s *bfad = (struct bfad_s *)ioc->bfa->bfad;
-	bfa_iocpf_disable(ioc);
-	BFA_LOG(KERN_INFO, bfad, log_level, "IOC disabled\n");
+	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_DISABLE);
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level, "IOC disabled\n");
 }
 
 /*
@@ -466,7 +456,7 @@ bfa_ioc_sm_disabling(struct bfa_ioc_s *ioc, enum ioc_event event)
 		 * after iocpf sm completes failure processing and
 		 * moves to disabled state.
 		 */
-		bfa_iocpf_fail(ioc);
+		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_FAIL);
 		break;
 
 	default:
@@ -499,7 +489,7 @@ bfa_ioc_sm_disabled(struct bfa_ioc_s *ioc, enum ioc_event event)
 
 	case IOC_E_DETACH:
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
-		bfa_iocpf_stop(ioc);
+		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_STOP);
 		break;
 
 	default:
@@ -509,16 +499,16 @@ bfa_ioc_sm_disabled(struct bfa_ioc_s *ioc, enum ioc_event event)
 
 
 static void
-bfa_ioc_sm_initfail_entry(struct bfa_ioc_s *ioc)
+bfa_ioc_sm_fail_retry_entry(struct bfa_ioc_s *ioc)
 {
-	ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+	bfa_trc(ioc, 0);
 }
 
 /*
- * Hardware initialization failed.
+ * Hardware initialization retry.
  */
 static void
-bfa_ioc_sm_initfail(struct bfa_ioc_s *ioc, enum ioc_event event)
+bfa_ioc_sm_fail_retry(struct bfa_ioc_s *ioc, enum ioc_event event)
 {
 	bfa_trc(ioc, event);
 
@@ -527,11 +517,21 @@ bfa_ioc_sm_initfail(struct bfa_ioc_s *ioc, enum ioc_event event)
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_getattr);
 		break;
 
-	case IOC_E_FAILED:
+	case IOC_E_PFFAILED:
+	case IOC_E_HWERROR:
 		/*
-		 * Initialization failure during iocpf init retry.
+		 * Initialization retry failed.
 		 */
 		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+		if (event != IOC_E_PFFAILED)
+			bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_INITFAIL);
+		break;
+
+	case IOC_E_INITFAILED:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_fail);
+		break;
+
+	case IOC_E_ENABLE:
 		break;
 
 	case IOC_E_DISABLE:
@@ -540,7 +540,7 @@ bfa_ioc_sm_initfail(struct bfa_ioc_s *ioc, enum ioc_event event)
 
 	case IOC_E_DETACH:
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
-		bfa_iocpf_stop(ioc);
+		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_STOP);
 		break;
 
 	default:
@@ -552,21 +552,7 @@ bfa_ioc_sm_initfail(struct bfa_ioc_s *ioc, enum ioc_event event)
 static void
 bfa_ioc_sm_fail_entry(struct bfa_ioc_s *ioc)
 {
-	struct list_head			*qe;
-	struct bfa_ioc_hbfail_notify_s	*notify;
-	struct bfad_s *bfad = (struct bfad_s *)ioc->bfa->bfad;
-
-	/*
-	 * Notify driver and common modules registered for notification.
-	 */
-	ioc->cbfn->hbfail_cbfn(ioc->bfa);
-	list_for_each(qe, &ioc->hb_notify_q) {
-		notify = (struct bfa_ioc_hbfail_notify_s *) qe;
-		notify->cbfn(notify->cbarg);
-	}
-
-	BFA_LOG(KERN_CRIT, bfad, log_level,
-		"Heart Beat of IOC has failed\n");
+	bfa_trc(ioc, 0);
 }
 
 /*
@@ -579,23 +565,19 @@ bfa_ioc_sm_fail(struct bfa_ioc_s *ioc, enum ioc_event event)
 
 	switch (event) {
 
-	case IOC_E_FAILED:
-		/*
-		 * Initialization failure during iocpf recovery.
-		 * !!! Fall through !!!
-		 */
 	case IOC_E_ENABLE:
 		ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
 		break;
 
-	case IOC_E_ENABLED:
-		bfa_fsm_set_state(ioc, bfa_ioc_sm_getattr);
-		break;
-
 	case IOC_E_DISABLE:
 		bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
 		break;
 
+	case IOC_E_DETACH:
+		bfa_fsm_set_state(ioc, bfa_ioc_sm_uninit);
+		bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_STOP);
+		break;
+
 	case IOC_E_HWERROR:
 		/*
 		 * HB failure notification, ignore.
@@ -606,13 +588,10 @@ bfa_ioc_sm_fail(struct bfa_ioc_s *ioc, enum ioc_event event)
 	}
 }
 
-
-
 /*
  * IOCPF State Machine
  */
 
-
 /*
  * Reset entry actions -- initialize state machine
  */
@@ -668,22 +647,29 @@ bfa_iocpf_sm_fwcheck(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 	switch (event) {
 	case IOCPF_E_SEMLOCKED:
 		if (bfa_ioc_firmware_lock(ioc)) {
-			iocpf->retry_count = 0;
-			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
+			if (bfa_ioc_sync_complete(ioc)) {
+				iocpf->retry_count = 0;
+				bfa_ioc_sync_join(ioc);
+				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
+			} else {
+				bfa_ioc_firmware_unlock(ioc);
+				writel(1, ioc->ioc_regs.ioc_sem_reg);
+				bfa_sem_timer_start(ioc);
+			}
 		} else {
-			bfa_ioc_hw_sem_release(ioc);
+			writel(1, ioc->ioc_regs.ioc_sem_reg);
 			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_mismatch);
 		}
 		break;
 
 	case IOCPF_E_DISABLE:
-		bfa_ioc_hw_sem_get_cancel(ioc);
+		bfa_sem_timer_stop(ioc);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
-		bfa_ioc_pf_disabled(ioc);
+		bfa_fsm_send_event(ioc, IOC_E_DISABLED);
 		break;
 
 	case IOCPF_E_STOP:
-		bfa_ioc_hw_sem_get_cancel(ioc);
+		bfa_sem_timer_stop(ioc);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
 		break;
 
@@ -726,7 +712,7 @@ bfa_iocpf_sm_mismatch(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 	case IOCPF_E_DISABLE:
 		bfa_iocpf_timer_stop(ioc);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
-		bfa_ioc_pf_disabled(ioc);
+		bfa_fsm_send_event(ioc, IOC_E_DISABLED);
 		break;
 
 	case IOCPF_E_STOP:
@@ -760,13 +746,18 @@ bfa_iocpf_sm_semwait(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 
 	switch (event) {
 	case IOCPF_E_SEMLOCKED:
-		iocpf->retry_count = 0;
-		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
+		if (bfa_ioc_sync_complete(ioc)) {
+			bfa_ioc_sync_join(ioc);
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
+		} else {
+			writel(1, ioc->ioc_regs.ioc_sem_reg);
+			bfa_sem_timer_start(ioc);
+		}
 		break;
 
 	case IOCPF_E_DISABLE:
-		bfa_ioc_hw_sem_get_cancel(ioc);
-		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
+		bfa_sem_timer_stop(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
 		break;
 
 	default:
@@ -774,12 +765,11 @@ bfa_iocpf_sm_semwait(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 	}
 }
 
-
 static void
 bfa_iocpf_sm_hwinit_entry(struct bfa_iocpf_s *iocpf)
 {
 	bfa_iocpf_timer_start(iocpf->ioc);
-	bfa_ioc_reset(iocpf->ioc, BFA_FALSE);
+	bfa_ioc_hwinit(iocpf->ioc, BFA_FALSE);
 }
 
 /*
@@ -806,23 +796,16 @@ bfa_iocpf_sm_hwinit(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 		 */
 
 	case IOCPF_E_TIMEOUT:
-		iocpf->retry_count++;
-		if (iocpf->retry_count < BFA_IOC_HWINIT_MAX) {
-			bfa_iocpf_timer_start(ioc);
-			bfa_ioc_reset(ioc, BFA_TRUE);
-			break;
-		}
-
-		bfa_ioc_hw_sem_release(ioc);
-		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail);
-
+		writel(1, ioc->ioc_regs.ioc_sem_reg);
 		if (event == IOCPF_E_TIMEOUT)
-			bfa_ioc_pf_failed(ioc);
+			bfa_fsm_send_event(ioc, IOC_E_PFFAILED);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail_sync);
 		break;
 
 	case IOCPF_E_DISABLE:
-		bfa_ioc_hw_sem_release(ioc);
 		bfa_iocpf_timer_stop(ioc);
+		bfa_ioc_sync_leave(ioc);
+		writel(1, ioc->ioc_regs.ioc_sem_reg);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
 		break;
 
@@ -831,7 +814,6 @@ bfa_iocpf_sm_hwinit(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 	}
 }
 
-
 static void
 bfa_iocpf_sm_enabling_entry(struct bfa_iocpf_s *iocpf)
 {
@@ -853,7 +835,7 @@ bfa_iocpf_sm_enabling(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 	switch (event) {
 	case IOCPF_E_FWRSP_ENABLE:
 		bfa_iocpf_timer_stop(ioc);
-		bfa_ioc_hw_sem_release(ioc);
+		writel(1, ioc->ioc_regs.ioc_sem_reg);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_ready);
 		break;
 
@@ -864,23 +846,15 @@ bfa_iocpf_sm_enabling(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 		 */
 
 	case IOCPF_E_TIMEOUT:
-		iocpf->retry_count++;
-		if (iocpf->retry_count < BFA_IOC_HWINIT_MAX) {
-			writel(BFI_IOC_UNINIT, ioc->ioc_regs.ioc_fwstate);
-			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
-			break;
-		}
-
-		bfa_ioc_hw_sem_release(ioc);
-		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail);
-
+		writel(1, ioc->ioc_regs.ioc_sem_reg);
 		if (event == IOCPF_E_TIMEOUT)
-			bfa_ioc_pf_failed(ioc);
+			bfa_fsm_send_event(ioc, IOC_E_PFFAILED);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail_sync);
 		break;
 
 	case IOCPF_E_DISABLE:
 		bfa_iocpf_timer_stop(ioc);
-		bfa_ioc_hw_sem_release(ioc);
+		writel(1, ioc->ioc_regs.ioc_sem_reg);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling);
 		break;
 
@@ -893,12 +867,10 @@ bfa_iocpf_sm_enabling(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 	}
 }
 
-
-
 static void
 bfa_iocpf_sm_ready_entry(struct bfa_iocpf_s *iocpf)
 {
-	bfa_ioc_pf_enabled(iocpf->ioc);
+	bfa_fsm_send_event(iocpf->ioc, IOC_E_ENABLED);
 }
 
 static void
@@ -914,20 +886,21 @@ bfa_iocpf_sm_ready(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 		break;
 
 	case IOCPF_E_GETATTRFAIL:
-		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail_sync);
 		break;
 
 	case IOCPF_E_FAIL:
-		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail_sync);
 		break;
 
 	case IOCPF_E_FWREADY:
-		if (bfa_ioc_is_operational(ioc))
-			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail);
-		else
-			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail);
-
-		bfa_ioc_pf_failed(ioc);
+		if (bfa_ioc_is_operational(ioc)) {
+			bfa_fsm_send_event(ioc, IOC_E_PFFAILED);
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail_sync);
+		} else {
+			bfa_fsm_send_event(ioc, IOC_E_PFFAILED);
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail_sync);
+		}
 		break;
 
 	default:
@@ -935,7 +908,6 @@ bfa_iocpf_sm_ready(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 	}
 }
 
-
 static void
 bfa_iocpf_sm_disabling_entry(struct bfa_iocpf_s *iocpf)
 {
@@ -957,7 +929,7 @@ bfa_iocpf_sm_disabling(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 	case IOCPF_E_FWRSP_DISABLE:
 	case IOCPF_E_FWREADY:
 		bfa_iocpf_timer_stop(ioc);
-		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
 		break;
 
 	case IOCPF_E_FAIL:
@@ -968,7 +940,7 @@ bfa_iocpf_sm_disabling(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 
 	case IOCPF_E_TIMEOUT:
 		writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate);
-		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
 		break;
 
 	case IOCPF_E_FWRSP_ENABLE:
@@ -979,13 +951,44 @@ bfa_iocpf_sm_disabling(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 	}
 }
 
+static void
+bfa_iocpf_sm_disabling_sync_entry(struct bfa_iocpf_s *iocpf)
+{
+	bfa_ioc_hw_sem_get(iocpf->ioc);
+}
+
+/*
+ * IOC hb ack request is being removed.
+ */
+static void
+bfa_iocpf_sm_disabling_sync(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
+{
+	struct bfa_ioc_s *ioc = iocpf->ioc;
+
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOCPF_E_SEMLOCKED:
+		bfa_ioc_sync_leave(ioc);
+		writel(1, ioc->ioc_regs.ioc_sem_reg);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
+		break;
+
+	case IOCPF_E_FAIL:
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
 /*
  * IOC disable completion entry.
  */
 static void
 bfa_iocpf_sm_disabled_entry(struct bfa_iocpf_s *iocpf)
 {
-	bfa_ioc_pf_disabled(iocpf->ioc);
+	bfa_fsm_send_event(iocpf->ioc, IOC_E_DISABLED);
 }
 
 static void
@@ -997,6 +1000,7 @@ bfa_iocpf_sm_disabled(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 
 	switch (event) {
 	case IOCPF_E_ENABLE:
+		iocpf->retry_count = 0;
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_semwait);
 		break;
 
@@ -1010,11 +1014,64 @@ bfa_iocpf_sm_disabled(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 	}
 }
 
+static void
+bfa_iocpf_sm_initfail_sync_entry(struct bfa_iocpf_s *iocpf)
+{
+	bfa_ioc_hw_sem_get(iocpf->ioc);
+}
+
+/*
+ * Hardware initialization failed.
+ */
+static void
+bfa_iocpf_sm_initfail_sync(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
+{
+	struct bfa_ioc_s *ioc = iocpf->ioc;
+
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOCPF_E_SEMLOCKED:
+		bfa_ioc_notify_fail(ioc);
+		bfa_ioc_sync_ack(ioc);
+		iocpf->retry_count++;
+		if (iocpf->retry_count >= BFA_IOC_HWINIT_MAX) {
+			bfa_ioc_sync_leave(ioc);
+			writel(1, ioc->ioc_regs.ioc_sem_reg);
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_initfail);
+		} else {
+			if (bfa_ioc_sync_complete(ioc))
+				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
+			else {
+				writel(1, ioc->ioc_regs.ioc_sem_reg);
+				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_semwait);
+			}
+		}
+		break;
+
+	case IOCPF_E_DISABLE:
+		bfa_sem_timer_stop(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
+		break;
+
+	case IOCPF_E_STOP:
+		bfa_sem_timer_stop(ioc);
+		bfa_ioc_firmware_unlock(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
+		break;
+
+	case IOCPF_E_FAIL:
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
 
 static void
 bfa_iocpf_sm_initfail_entry(struct bfa_iocpf_s *iocpf)
 {
-	bfa_iocpf_timer_start(iocpf->ioc);
+	bfa_fsm_send_event(iocpf->ioc, IOC_E_INITFAILED);
 }
 
 /*
@@ -1029,47 +1086,77 @@ bfa_iocpf_sm_initfail(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 
 	switch (event) {
 	case IOCPF_E_DISABLE:
-		bfa_iocpf_timer_stop(ioc);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
 		break;
 
 	case IOCPF_E_STOP:
-		bfa_iocpf_timer_stop(ioc);
 		bfa_ioc_firmware_unlock(ioc);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_reset);
 		break;
 
-	case IOCPF_E_TIMEOUT:
-		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_semwait);
-		break;
-
 	default:
 		bfa_sm_fault(ioc, event);
 	}
 }
 
-
 static void
-bfa_iocpf_sm_fail_entry(struct bfa_iocpf_s *iocpf)
+bfa_iocpf_sm_fail_sync_entry(struct bfa_iocpf_s *iocpf)
 {
 	/*
 	 * Mark IOC as failed in hardware and stop firmware.
 	 */
 	bfa_ioc_lpu_stop(iocpf->ioc);
-	writel(BFI_IOC_FAIL, iocpf->ioc->ioc_regs.ioc_fwstate);
-
-	/*
-	 * Notify other functions on HB failure.
-	 */
-	bfa_ioc_notify_hbfail(iocpf->ioc);
 
 	/*
 	 * Flush any queued up mailbox requests.
 	 */
 	bfa_ioc_mbox_hbfail(iocpf->ioc);
 
-	if (iocpf->auto_recover)
-		bfa_iocpf_recovery_timer_start(iocpf->ioc);
+	bfa_ioc_hw_sem_get(iocpf->ioc);
+}
+
+static void
+bfa_iocpf_sm_fail_sync(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
+{
+	struct bfa_ioc_s *ioc = iocpf->ioc;
+
+	bfa_trc(ioc, event);
+
+	switch (event) {
+	case IOCPF_E_SEMLOCKED:
+		iocpf->retry_count = 0;
+		bfa_ioc_sync_ack(ioc);
+		bfa_ioc_notify_fail(ioc);
+		if (!iocpf->auto_recover) {
+			bfa_ioc_sync_leave(ioc);
+			writel(1, ioc->ioc_regs.ioc_sem_reg);
+			bfa_fsm_set_state(iocpf, bfa_iocpf_sm_fail);
+		} else {
+			if (bfa_ioc_sync_complete(ioc))
+				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit);
+			else {
+				writel(1, ioc->ioc_regs.ioc_sem_reg);
+				bfa_fsm_set_state(iocpf, bfa_iocpf_sm_semwait);
+			}
+		}
+		break;
+
+	case IOCPF_E_DISABLE:
+		bfa_sem_timer_stop(ioc);
+		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabling_sync);
+		break;
+
+	case IOCPF_E_FAIL:
+		break;
+
+	default:
+		bfa_sm_fault(ioc, event);
+	}
+}
+
+static void
+bfa_iocpf_sm_fail_entry(struct bfa_iocpf_s *iocpf)
+{
 }
 
 /*
@@ -1084,24 +1171,16 @@ bfa_iocpf_sm_fail(struct bfa_iocpf_s *iocpf, enum iocpf_event event)
 
 	switch (event) {
 	case IOCPF_E_DISABLE:
-		if (iocpf->auto_recover)
-			bfa_iocpf_timer_stop(ioc);
 		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_disabled);
 		break;
 
-	case IOCPF_E_TIMEOUT:
-		bfa_fsm_set_state(iocpf, bfa_iocpf_sm_semwait);
-		break;
-
 	default:
 		bfa_sm_fault(ioc, event);
 	}
 }
 
-
-
 /*
- *  hal_ioc_pvt BFA IOC private functions
+ *  BFA IOC private functions
  */
 
 static void
@@ -1139,16 +1218,10 @@ bfa_ioc_sem_get(void __iomem *sem_reg)
 	if (r32 == 0)
 		return BFA_TRUE;
 
-	bfa_assert(cnt < BFA_SEM_SPINCNT);
+	WARN_ON(cnt >= BFA_SEM_SPINCNT);
 	return BFA_FALSE;
 }
 
-void
-bfa_ioc_sem_release(void __iomem *sem_reg)
-{
-	writel(1, sem_reg);
-}
-
 static void
 bfa_ioc_hw_sem_get(struct bfa_ioc_s *ioc)
 {
@@ -1167,18 +1240,6 @@ bfa_ioc_hw_sem_get(struct bfa_ioc_s *ioc)
 	bfa_sem_timer_start(ioc);
 }
 
-void
-bfa_ioc_hw_sem_release(struct bfa_ioc_s *ioc)
-{
-	writel(1, ioc->ioc_regs.ioc_sem_reg);
-}
-
-static void
-bfa_ioc_hw_sem_get_cancel(struct bfa_ioc_s *ioc)
-{
-	bfa_sem_timer_stop(ioc);
-}
-
 /*
  * Initialize LPU local memory (aka secondary memory / SRAM)
  */
@@ -1212,7 +1273,7 @@ bfa_ioc_lmem_init(struct bfa_ioc_s *ioc)
 	 * If memory initialization is not successful, IOC timeout will catch
 	 * such failures.
 	 */
-	bfa_assert(pss_ctl & __PSS_LMEM_INIT_DONE);
+	WARN_ON(!(pss_ctl & __PSS_LMEM_INIT_DONE));
 	bfa_trc(ioc, pss_ctl);
 
 	pss_ctl &= ~(__PSS_LMEM_INIT_DONE | __PSS_LMEM_INIT_EN);
@@ -1258,8 +1319,8 @@ bfa_ioc_fwver_get(struct bfa_ioc_s *ioc, struct bfi_ioc_image_hdr_s *fwhdr)
 	int		i;
 	u32	*fwsig = (u32 *) fwhdr;
 
-	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
-	pgoff = bfa_ioc_smem_pgoff(ioc, loff);
+	pgnum = PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, loff);
+	pgoff = PSS_SMEM_PGOFF(loff);
 	writel(pgnum, ioc->ioc_regs.host_page_num_fn);
 
 	for (i = 0; i < (sizeof(struct bfi_ioc_image_hdr_s) / sizeof(u32));
@@ -1304,12 +1365,6 @@ bfa_ioc_fwver_valid(struct bfa_ioc_s *ioc, u32 boot_env)
 {
 	struct bfi_ioc_image_hdr_s fwhdr, *drv_fwhdr;
 
-	/*
-	 * If bios/efi boot (flash based) -- return true
-	 */
-	if (bfa_ioc_is_bios_optrom(ioc))
-		return BFA_TRUE;
-
 	bfa_ioc_fwver_get(ioc, &fwhdr);
 	drv_fwhdr = (struct bfi_ioc_image_hdr_s *)
 		bfa_cb_image_get_chunk(BFA_IOC_FWIMG_TYPE(ioc), 0);
@@ -1342,7 +1397,6 @@ bfa_ioc_msgflush(struct bfa_ioc_s *ioc)
 		writel(1, ioc->ioc_regs.lpu_mbox_cmd);
 }
 
-
 static void
 bfa_ioc_hwinit(struct bfa_ioc_s *ioc, bfa_boolean_t force)
 {
@@ -1362,22 +1416,6 @@ bfa_ioc_hwinit(struct bfa_ioc_s *ioc, bfa_boolean_t force)
 	boot_env = BFI_BOOT_LOADER_OS;
 
 	/*
-	 * Flash based firmware boot BIOS env.
-	 */
-	if (bfa_ioc_is_bios_optrom(ioc)) {
-		boot_type = BFI_BOOT_TYPE_FLASH;
-		boot_env = BFI_BOOT_LOADER_BIOS;
-	}
-
-	/*
-	 * Flash based firmware boot UEFI env.
-	 */
-	if (bfa_ioc_is_uefi(ioc)) {
-		boot_type = BFI_BOOT_TYPE_FLASH;
-		boot_env = BFI_BOOT_LOADER_UEFI;
-	}
-
-	/*
 	 * check if firmware is valid
 	 */
 	fwvalid = (ioc_fwstate == BFI_IOC_UNINIT) ?
@@ -1405,8 +1443,7 @@ bfa_ioc_hwinit(struct bfa_ioc_s *ioc, bfa_boolean_t force)
 	 * convergence, IOC will be in operational state when 2nd driver
 	 * is loaded.
 	 */
-	if (ioc_fwstate == BFI_IOC_DISABLED ||
-	    (!bfa_ioc_is_bios_optrom(ioc) && ioc_fwstate == BFI_IOC_OP)) {
+	if (ioc_fwstate == BFI_IOC_DISABLED || ioc_fwstate == BFI_IOC_OP) {
 
 		/*
 		 * When using MSI-X any pending firmware ready event should
@@ -1442,7 +1479,7 @@ bfa_ioc_mbox_send(struct bfa_ioc_s *ioc, void *ioc_msg, int len)
 	bfa_trc(ioc, msgp[0]);
 	bfa_trc(ioc, len);
 
-	bfa_assert(len <= BFI_IOC_MSGLEN_MAX);
+	WARN_ON(len > BFI_IOC_MSGLEN_MAX);
 
 	/*
 	 * first write msg to mailbox registers
@@ -1465,12 +1502,12 @@ static void
 bfa_ioc_send_enable(struct bfa_ioc_s *ioc)
 {
 	struct bfi_ioc_ctrl_req_s enable_req;
-	struct bfa_timeval_s tv;
+	struct timeval tv;
 
 	bfi_h2i_set(enable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_ENABLE_REQ,
 		    bfa_ioc_portid(ioc));
 	enable_req.ioc_class = ioc->ioc_mc;
-	bfa_os_gettimeofday(&tv);
+	do_gettimeofday(&tv);
 	enable_req.tv_sec = be32_to_cpu(tv.tv_sec);
 	bfa_ioc_mbox_send(ioc, &enable_req, sizeof(struct bfi_ioc_ctrl_req_s));
 }
@@ -1504,7 +1541,6 @@ bfa_ioc_hb_check(void *cbarg)
 
 	hb_count = readl(ioc->ioc_regs.heartbeat);
 	if (ioc->hb_count == hb_count) {
-		printk(KERN_CRIT "Firmware heartbeat failure at %d", hb_count);
 		bfa_ioc_recover(ioc);
 		return;
 	} else {
@@ -1522,13 +1558,6 @@ bfa_ioc_hb_monitor(struct bfa_ioc_s *ioc)
 	bfa_hb_timer_start(ioc);
 }
 
-static void
-bfa_ioc_hb_stop(struct bfa_ioc_s *ioc)
-{
-	bfa_hb_timer_stop(ioc);
-}
-
-
 /*
  *	Initiate a full firmware download.
  */
@@ -1550,8 +1579,8 @@ bfa_ioc_download_fw(struct bfa_ioc_s *ioc, u32 boot_type,
 	bfa_trc(ioc, bfa_cb_image_get_size(BFA_IOC_FWIMG_TYPE(ioc)));
 	fwimg = bfa_cb_image_get_chunk(BFA_IOC_FWIMG_TYPE(ioc), chunkno);
 
-	pgnum = bfa_ioc_smem_pgnum(ioc, loff);
-	pgoff = bfa_ioc_smem_pgoff(ioc, loff);
+	pgnum = PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, loff);
+	pgoff = PSS_SMEM_PGOFF(loff);
 
 	writel(pgnum, ioc->ioc_regs.host_page_num_fn);
 
@@ -1581,7 +1610,8 @@ bfa_ioc_download_fw(struct bfa_ioc_s *ioc, u32 boot_type,
 		}
 	}
 
-	writel(bfa_ioc_smem_pgnum(ioc, 0), ioc->ioc_regs.host_page_num_fn);
+	writel(PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, 0),
+			ioc->ioc_regs.host_page_num_fn);
 
 	/*
 	 * Set boot type and boot param at the end.
@@ -1592,11 +1622,6 @@ bfa_ioc_download_fw(struct bfa_ioc_s *ioc, u32 boot_type,
 			swab32(boot_env));
 }
 
-static void
-bfa_ioc_reset(struct bfa_ioc_s *ioc, bfa_boolean_t force)
-{
-	bfa_ioc_hwinit(ioc, force);
-}
 
 /*
  * Update BFA configuration from firmware configuration.
@@ -1683,12 +1708,13 @@ bfa_ioc_mbox_hbfail(struct bfa_ioc_s *ioc)
 static bfa_status_t
 bfa_ioc_smem_read(struct bfa_ioc_s *ioc, void *tbuf, u32 soff, u32 sz)
 {
-	u32 pgnum, loff, r32;
+	u32 pgnum, loff;
+	__be32 r32;
 	int i, len;
 	u32 *buf = tbuf;
 
-	pgnum = bfa_ioc_smem_pgnum(ioc, soff);
-	loff = bfa_ioc_smem_pgoff(ioc, soff);
+	pgnum = PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, soff);
+	loff = PSS_SMEM_PGOFF(soff);
 	bfa_trc(ioc, pgnum);
 	bfa_trc(ioc, loff);
 	bfa_trc(ioc, sz);
@@ -1719,11 +1745,12 @@ bfa_ioc_smem_read(struct bfa_ioc_s *ioc, void *tbuf, u32 soff, u32 sz)
 			writel(pgnum, ioc->ioc_regs.host_page_num_fn);
 		}
 	}
-	writel(bfa_ioc_smem_pgnum(ioc, 0), ioc->ioc_regs.host_page_num_fn);
+	writel(PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, 0),
+			ioc->ioc_regs.host_page_num_fn);
 	/*
 	 *  release semaphore.
 	 */
-	bfa_ioc_sem_release(ioc->ioc_regs.ioc_init_sem_reg);
+	writel(1, ioc->ioc_regs.ioc_init_sem_reg);
 
 	bfa_trc(ioc, pgnum);
 	return BFA_STATUS_OK;
@@ -1742,8 +1769,8 @@ bfa_ioc_smem_clr(struct bfa_ioc_s *ioc, u32 soff, u32 sz)
 	int i, len;
 	u32 pgnum, loff;
 
-	pgnum = bfa_ioc_smem_pgnum(ioc, soff);
-	loff = bfa_ioc_smem_pgoff(ioc, soff);
+	pgnum = PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, soff);
+	loff = PSS_SMEM_PGOFF(soff);
 	bfa_trc(ioc, pgnum);
 	bfa_trc(ioc, loff);
 	bfa_trc(ioc, sz);
@@ -1773,35 +1800,38 @@ bfa_ioc_smem_clr(struct bfa_ioc_s *ioc, u32 soff, u32 sz)
 			writel(pgnum, ioc->ioc_regs.host_page_num_fn);
 		}
 	}
-	writel(bfa_ioc_smem_pgnum(ioc, 0), ioc->ioc_regs.host_page_num_fn);
+	writel(PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, 0),
+			ioc->ioc_regs.host_page_num_fn);
 
 	/*
 	 *  release semaphore.
 	 */
-	bfa_ioc_sem_release(ioc->ioc_regs.ioc_init_sem_reg);
+	writel(1, ioc->ioc_regs.ioc_init_sem_reg);
 	bfa_trc(ioc, pgnum);
 	return BFA_STATUS_OK;
 }
 
-/*
- * hal iocpf to ioc interface
- */
 static void
-bfa_ioc_pf_enabled(struct bfa_ioc_s *ioc)
+bfa_ioc_fail_notify(struct bfa_ioc_s *ioc)
 {
-	bfa_fsm_send_event(ioc, IOC_E_ENABLED);
-}
+	struct list_head		*qe;
+	struct bfa_ioc_hbfail_notify_s	*notify;
+	struct bfad_s *bfad = (struct bfad_s *)ioc->bfa->bfad;
 
-static void
-bfa_ioc_pf_disabled(struct bfa_ioc_s *ioc)
-{
-	bfa_fsm_send_event(ioc, IOC_E_DISABLED);
-}
+	/*
+	 * Notify driver and common modules registered for notification.
+	 */
+	ioc->cbfn->hbfail_cbfn(ioc->bfa);
+	list_for_each(qe, &ioc->hb_notify_q) {
+		notify = (struct bfa_ioc_hbfail_notify_s *) qe;
+		notify->cbfn(notify->cbarg);
+	}
+
+	bfa_ioc_debug_save_ftrc(ioc);
+
+	BFA_LOG(KERN_CRIT, bfad, bfa_log_level,
+		"Heart Beat of IOC has failed\n");
 
-static void
-bfa_ioc_pf_failed(struct bfa_ioc_s *ioc)
-{
-	bfa_fsm_send_event(ioc, IOC_E_FAILED);
 }
 
 static void
@@ -1812,17 +1842,11 @@ bfa_ioc_pf_fwmismatch(struct bfa_ioc_s *ioc)
 	 * Provide enable completion callback.
 	 */
 	ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
-	BFA_LOG(KERN_WARNING, bfad, log_level,
+	BFA_LOG(KERN_WARNING, bfad, bfa_log_level,
 		"Running firmware version is incompatible "
 		"with the driver version\n");
 }
 
-
-
-/*
- *  hal_ioc_public
- */
-
 bfa_status_t
 bfa_ioc_pll_init(struct bfa_ioc_s *ioc)
 {
@@ -1838,7 +1862,7 @@ bfa_ioc_pll_init(struct bfa_ioc_s *ioc)
 	/*
 	 *  release semaphore.
 	 */
-	bfa_ioc_sem_release(ioc->ioc_regs.ioc_init_sem_reg);
+	writel(1, ioc->ioc_regs.ioc_init_sem_reg);
 
 	return BFA_STATUS_OK;
 }
@@ -1909,7 +1933,7 @@ bfa_ioc_is_initialized(struct bfa_ioc_s *ioc)
 void
 bfa_ioc_msgget(struct bfa_ioc_s *ioc, void *mbmsg)
 {
-	u32	*msgp = mbmsg;
+	__be32	*msgp = mbmsg;
 	u32	r32;
 	int		i;
 
@@ -1962,7 +1986,7 @@ bfa_ioc_isr(struct bfa_ioc_s *ioc, struct bfi_mbmsg_s *m)
 
 	default:
 		bfa_trc(ioc, msg->mh.msg_id);
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
 
@@ -2043,15 +2067,6 @@ bfa_ioc_mem_claim(struct bfa_ioc_s *ioc,  u8 *dm_kva, u64 dm_pa)
 	ioc->attr = (struct bfi_ioc_attr_s *) dm_kva;
 }
 
-/*
- * Return size of dma memory required.
- */
-u32
-bfa_ioc_meminfo(void)
-{
-	return BFA_ROUNDUP(sizeof(struct bfi_ioc_attr_s), BFA_DMA_ALIGN_SZ);
-}
-
 void
 bfa_ioc_enable(struct bfa_ioc_s *ioc)
 {
@@ -2068,18 +2083,6 @@ bfa_ioc_disable(struct bfa_ioc_s *ioc)
 	bfa_fsm_send_event(ioc, IOC_E_DISABLE);
 }
 
-/*
- * Returns memory required for saving firmware trace in case of crash.
- * Driver must call this interface to allocate memory required for
- * automatic saving of firmware trace. Driver should call
- * bfa_ioc_debug_memclaim() right after bfa_ioc_attach() to setup this
- * trace memory.
- */
-int
-bfa_ioc_debug_trcsz(bfa_boolean_t auto_recover)
-{
-	return (auto_recover) ? BFA_DBG_FWTRC_LEN : 0;
-}
 
 /*
  * Initialize memory for saving firmware trace. Driver must initialize
@@ -2089,19 +2092,7 @@ void
 bfa_ioc_debug_memclaim(struct bfa_ioc_s *ioc, void *dbg_fwsave)
 {
 	ioc->dbg_fwsave	    = dbg_fwsave;
-	ioc->dbg_fwsave_len = bfa_ioc_debug_trcsz(ioc->iocpf.auto_recover);
-}
-
-u32
-bfa_ioc_smem_pgnum(struct bfa_ioc_s *ioc, u32 fmaddr)
-{
-	return PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, fmaddr);
-}
-
-u32
-bfa_ioc_smem_pgoff(struct bfa_ioc_s *ioc, u32 fmaddr)
-{
-	return PSS_SMEM_PGOFF(fmaddr);
+	ioc->dbg_fwsave_len = (ioc->iocpf.auto_recover) ? BFA_DBG_FWTRC_LEN : 0;
 }
 
 /*
@@ -2265,14 +2256,13 @@ bfa_ioc_adapter_is_disabled(struct bfa_ioc_s *ioc)
 }
 
 /*
- * Add to IOC heartbeat failure notification queue. To be used by common
- * modules such as cee, port, diag.
+ * Reset IOC fwstate registers.
  */
 void
-bfa_ioc_hbfail_register(struct bfa_ioc_s *ioc,
-			struct bfa_ioc_hbfail_notify_s *notify)
+bfa_ioc_reset_fwstate(struct bfa_ioc_s *ioc)
 {
-	list_add_tail(&notify->qe, &ioc->hb_notify_q);
+	writel(BFI_IOC_UNINIT, ioc->ioc_regs.ioc_fwstate);
+	writel(BFI_IOC_UNINIT, ioc->ioc_regs.alt_ioc_fwstate);
 }
 
 #define BFA_MFG_NAME "Brocade"
@@ -2306,7 +2296,7 @@ bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
 	else
 		ad_attr->prototype = 0;
 
-	ad_attr->pwwn = bfa_ioc_get_pwwn(ioc);
+	ad_attr->pwwn = ioc->attr->pwwn;
 	ad_attr->mac  = bfa_ioc_get_mac(ioc);
 
 	ad_attr->pcie_gen = ioc_attr->pcie_gen;
@@ -2317,7 +2307,8 @@ bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
 	bfa_ioc_get_pci_chip_rev(ioc, ad_attr->hw_ver);
 
 	ad_attr->cna_capable = ioc->cna;
-	ad_attr->trunk_capable = (ad_attr->nports > 1) && !ioc->cna;
+	ad_attr->trunk_capable = (ad_attr->nports > 1) && !ioc->cna &&
+				!ad_attr->is_mezz;
 }
 
 enum bfa_ioc_type_e
@@ -2330,7 +2321,7 @@ bfa_ioc_get_type(struct bfa_ioc_s *ioc)
 	else if (ioc->ioc_mc == BFI_MC_LL)
 		return BFA_IOC_TYPE_LL;
 	else {
-		bfa_assert(ioc->ioc_mc == BFI_MC_LL);
+		WARN_ON(ioc->ioc_mc != BFI_MC_LL);
 		return BFA_IOC_TYPE_LL;
 	}
 }
@@ -2354,7 +2345,7 @@ bfa_ioc_get_adapter_fw_ver(struct bfa_ioc_s *ioc, char *fw_ver)
 void
 bfa_ioc_get_pci_chip_rev(struct bfa_ioc_s *ioc, char *chip_rev)
 {
-	bfa_assert(chip_rev);
+	WARN_ON(!chip_rev);
 
 	memset((void *)chip_rev, 0, BFA_IOC_CHIP_REV_LEN);
 
@@ -2386,7 +2377,7 @@ bfa_ioc_get_adapter_model(struct bfa_ioc_s *ioc, char *model)
 {
 	struct bfi_ioc_attr_s	*ioc_attr;
 
-	bfa_assert(model);
+	WARN_ON(!model);
 	memset((void *)model, 0, BFA_ADAPTER_MODEL_NAME_LEN);
 
 	ioc_attr = ioc->attr;
@@ -2455,27 +2446,6 @@ bfa_ioc_get_attr(struct bfa_ioc_s *ioc, struct bfa_ioc_attr_s *ioc_attr)
 	bfa_ioc_get_pci_chip_rev(ioc, ioc_attr->pci_attr.chip_rev);
 }
 
-/*
- *  hal_wwn_public
- */
-wwn_t
-bfa_ioc_get_pwwn(struct bfa_ioc_s *ioc)
-{
-	return ioc->attr->pwwn;
-}
-
-wwn_t
-bfa_ioc_get_nwwn(struct bfa_ioc_s *ioc)
-{
-	return ioc->attr->nwwn;
-}
-
-u64
-bfa_ioc_get_adid(struct bfa_ioc_s *ioc)
-{
-	return ioc->attr->mfg_pwwn;
-}
-
 mac_t
 bfa_ioc_get_mac(struct bfa_ioc_s *ioc)
 {
@@ -2488,18 +2458,6 @@ bfa_ioc_get_mac(struct bfa_ioc_s *ioc)
 		return ioc->attr->mac;
 }
 
-wwn_t
-bfa_ioc_get_mfg_pwwn(struct bfa_ioc_s *ioc)
-{
-	return ioc->attr->mfg_pwwn;
-}
-
-wwn_t
-bfa_ioc_get_mfg_nwwn(struct bfa_ioc_s *ioc)
-{
-	return ioc->attr->mfg_nwwn;
-}
-
 mac_t
 bfa_ioc_get_mfg_mac(struct bfa_ioc_s *ioc)
 {
@@ -2541,14 +2499,6 @@ bfa_ioc_debug_fwsave(struct bfa_ioc_s *ioc, void *trcdata, int *trclen)
 	return BFA_STATUS_OK;
 }
 
-/*
- * Clear saved firmware trace
- */
-void
-bfa_ioc_debug_fwsave_clear(struct bfa_ioc_s *ioc)
-{
-	ioc->dbg_fwsave_once = BFA_TRUE;
-}
 
 /*
  * Retrieve saved firmware trace from a prior IOC failure.
@@ -2701,13 +2651,16 @@ bfa_ioc_fw_stats_clear(struct bfa_ioc_s *ioc)
  * Save firmware trace if configured.
  */
 static void
-bfa_ioc_debug_save(struct bfa_ioc_s *ioc)
+bfa_ioc_debug_save_ftrc(struct bfa_ioc_s *ioc)
 {
 	int		tlen;
 
-	if (ioc->dbg_fwsave_len) {
-		tlen = ioc->dbg_fwsave_len;
-		bfa_ioc_debug_fwtrc(ioc, ioc->dbg_fwsave, &tlen);
+	if (ioc->dbg_fwsave_once) {
+		ioc->dbg_fwsave_once = BFA_FALSE;
+		if (ioc->dbg_fwsave_len) {
+			tlen = ioc->dbg_fwsave_len;
+			bfa_ioc_debug_fwtrc(ioc, ioc->dbg_fwsave, &tlen);
+		}
 	}
 }
 
@@ -2717,11 +2670,6 @@ bfa_ioc_debug_save(struct bfa_ioc_s *ioc)
 static void
 bfa_ioc_recover(struct bfa_ioc_s *ioc)
 {
-	if (ioc->dbg_fwsave_once) {
-		ioc->dbg_fwsave_once = BFA_FALSE;
-		bfa_ioc_debug_save(ioc);
-	}
-
 	bfa_ioc_stats(ioc, ioc_hbfails);
 	bfa_fsm_send_event(ioc, IOC_E_HBFAIL);
 }
@@ -2734,45 +2682,8 @@ bfa_ioc_check_attr_wwns(struct bfa_ioc_s *ioc)
 }
 
 /*
- *  hal_iocpf_pvt BFA IOC PF private functions
+ *  BFA IOC PF private functions
  */
-
-static void
-bfa_iocpf_enable(struct bfa_ioc_s *ioc)
-{
-	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_ENABLE);
-}
-
-static void
-bfa_iocpf_disable(struct bfa_ioc_s *ioc)
-{
-	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_DISABLE);
-}
-
-static void
-bfa_iocpf_fail(struct bfa_ioc_s *ioc)
-{
-	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_FAIL);
-}
-
-static void
-bfa_iocpf_initfail(struct bfa_ioc_s *ioc)
-{
-	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_INITFAIL);
-}
-
-static void
-bfa_iocpf_getattrfail(struct bfa_ioc_s *ioc)
-{
-	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_GETATTRFAIL);
-}
-
-static void
-bfa_iocpf_stop(struct bfa_ioc_s *ioc)
-{
-	bfa_fsm_send_event(&ioc->iocpf, IOCPF_E_STOP);
-}
-
 static void
 bfa_iocpf_timeout(void *ioc_arg)
 {
@@ -2794,12 +2705,6 @@ bfa_iocpf_sem_timeout(void *ioc_arg)
  *  bfa timer function
  */
 void
-bfa_timer_init(struct bfa_timer_mod_s *mod)
-{
-	INIT_LIST_HEAD(&mod->timer_q);
-}
-
-void
 bfa_timer_beat(struct bfa_timer_mod_s *mod)
 {
 	struct list_head *qh = &mod->timer_q;
@@ -2843,8 +2748,8 @@ bfa_timer_begin(struct bfa_timer_mod_s *mod, struct bfa_timer_s *timer,
 		    void (*timercb) (void *), void *arg, unsigned int timeout)
 {
 
-	bfa_assert(timercb != NULL);
-	bfa_assert(!bfa_q_is_on_q(&mod->timer_q, timer));
+	WARN_ON(timercb == NULL);
+	WARN_ON(bfa_q_is_on_q(&mod->timer_q, timer));
 
 	timer->timeout = timeout;
 	timer->timercb = timercb;
@@ -2859,7 +2764,7 @@ bfa_timer_begin(struct bfa_timer_mod_s *mod, struct bfa_timer_s *timer,
 void
 bfa_timer_stop(struct bfa_timer_s *timer)
 {
-	bfa_assert(!list_empty(&timer->qe));
+	WARN_ON(list_empty(&timer->qe));
 
 	list_del(&timer->qe);
 }
diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h
index 9c407a87a1a..ec9cf08b0e7 100644
--- a/drivers/scsi/bfa/bfa_ioc.h
+++ b/drivers/scsi/bfa/bfa_ioc.h
@@ -18,10 +18,15 @@
 #ifndef __BFA_IOC_H__
 #define __BFA_IOC_H__
 
-#include "bfa_os_inc.h"
+#include "bfad_drv.h"
 #include "bfa_cs.h"
 #include "bfi.h"
 
+#define BFA_DBG_FWTRC_ENTS	(BFI_IOC_TRC_ENTS)
+#define BFA_DBG_FWTRC_LEN					\
+	(BFA_DBG_FWTRC_ENTS * sizeof(struct bfa_trc_s) +	\
+	(sizeof(struct bfa_trc_mod_s) -				\
+	BFA_TRC_MAX * sizeof(struct bfa_trc_s)))
 /*
  * BFA timer declarations
  */
@@ -47,7 +52,6 @@ struct bfa_timer_mod_s {
 #define BFA_TIMER_FREQ 200 /* specified in millisecs */
 
 void bfa_timer_beat(struct bfa_timer_mod_s *mod);
-void bfa_timer_init(struct bfa_timer_mod_s *mod);
 void bfa_timer_begin(struct bfa_timer_mod_s *mod, struct bfa_timer_s *timer,
 			bfa_timer_cbfn_t timercb, void *arg,
 			unsigned int timeout);
@@ -70,7 +74,7 @@ struct bfa_sge_s {
 #define bfa_swap_words(_x)  (	\
 	((_x) << 32) | ((_x) >> 32))
 
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 #define bfa_sge_to_be(_x)
 #define bfa_sge_to_le(_x)	bfa_sge_word_swap(_x)
 #define bfa_sgaddr_le(_x)	bfa_swap_words(_x)
@@ -115,8 +119,8 @@ struct bfa_dma_s {
 static inline void
 __bfa_dma_addr_set(union bfi_addr_u *dma_addr, u64 pa)
 {
-	dma_addr->a32.addr_lo = (u32) pa;
-	dma_addr->a32.addr_hi = (u32) (bfa_os_u32(pa));
+	dma_addr->a32.addr_lo = (__be32) pa;
+	dma_addr->a32.addr_hi = (__be32) (pa >> 32);
 }
 
 
@@ -125,8 +129,8 @@ __bfa_dma_addr_set(union bfi_addr_u *dma_addr, u64 pa)
 static inline void
 __bfa_dma_be_addr_set(union bfi_addr_u *dma_addr, u64 pa)
 {
-	dma_addr->a32.addr_lo = (u32) cpu_to_be32(pa);
-	dma_addr->a32.addr_hi = (u32) cpu_to_be32(bfa_os_u32(pa));
+	dma_addr->a32.addr_lo = cpu_to_be32(pa);
+	dma_addr->a32.addr_hi = cpu_to_be32(pa >> 32);
 }
 
 struct bfa_ioc_regs_s {
@@ -145,8 +149,11 @@ struct bfa_ioc_regs_s {
 	void __iomem *host_page_num_fn;
 	void __iomem *heartbeat;
 	void __iomem *ioc_fwstate;
+	void __iomem *alt_ioc_fwstate;
 	void __iomem *ll_halt;
+	void __iomem *alt_ll_halt;
 	void __iomem *err_set;
+	void __iomem *ioc_fail_sync;
 	void __iomem *shirq_isr_next;
 	void __iomem *shirq_msk_next;
 	void __iomem *smem_page_start;
@@ -254,8 +261,12 @@ struct bfa_ioc_hwif_s {
 	void		(*ioc_map_port)	(struct bfa_ioc_s *ioc);
 	void		(*ioc_isr_mode_set)	(struct bfa_ioc_s *ioc,
 					bfa_boolean_t msix);
-	void		(*ioc_notify_hbfail)	(struct bfa_ioc_s *ioc);
+	void		(*ioc_notify_fail)	(struct bfa_ioc_s *ioc);
 	void		(*ioc_ownership_reset)	(struct bfa_ioc_s *ioc);
+	void		(*ioc_sync_join)	(struct bfa_ioc_s *ioc);
+	void		(*ioc_sync_leave)	(struct bfa_ioc_s *ioc);
+	void		(*ioc_sync_ack)		(struct bfa_ioc_s *ioc);
+	bfa_boolean_t	(*ioc_sync_complete)	(struct bfa_ioc_s *ioc);
 };
 
 #define bfa_ioc_pcifn(__ioc)		((__ioc)->pcidev.pci_func)
@@ -325,7 +336,6 @@ void bfa_ioc_auto_recover(bfa_boolean_t auto_recover);
 void bfa_ioc_detach(struct bfa_ioc_s *ioc);
 void bfa_ioc_pci_init(struct bfa_ioc_s *ioc, struct bfa_pcidev_s *pcidev,
 		enum bfi_mclass mc);
-u32 bfa_ioc_meminfo(void);
 void bfa_ioc_mem_claim(struct bfa_ioc_s *ioc,  u8 *dm_kva, u64 dm_pa);
 void bfa_ioc_enable(struct bfa_ioc_s *ioc);
 void bfa_ioc_disable(struct bfa_ioc_s *ioc);
@@ -340,6 +350,7 @@ bfa_boolean_t bfa_ioc_is_initialized(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_is_disabled(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_fw_mismatch(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_adapter_is_disabled(struct bfa_ioc_s *ioc);
+void bfa_ioc_reset_fwstate(struct bfa_ioc_s *ioc);
 enum bfa_ioc_type_e bfa_ioc_get_type(struct bfa_ioc_s *ioc);
 void bfa_ioc_get_adapter_serial_num(struct bfa_ioc_s *ioc, char *serial_num);
 void bfa_ioc_get_adapter_fw_ver(struct bfa_ioc_s *ioc, char *fw_ver);
@@ -353,24 +364,16 @@ enum bfa_ioc_state bfa_ioc_get_state(struct bfa_ioc_s *ioc);
 void bfa_ioc_get_attr(struct bfa_ioc_s *ioc, struct bfa_ioc_attr_s *ioc_attr);
 void bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
 		struct bfa_adapter_attr_s *ad_attr);
-int bfa_ioc_debug_trcsz(bfa_boolean_t auto_recover);
 void bfa_ioc_debug_memclaim(struct bfa_ioc_s *ioc, void *dbg_fwsave);
 bfa_status_t bfa_ioc_debug_fwsave(struct bfa_ioc_s *ioc, void *trcdata,
 		int *trclen);
-void bfa_ioc_debug_fwsave_clear(struct bfa_ioc_s *ioc);
 bfa_status_t bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata,
 				 int *trclen);
 bfa_status_t bfa_ioc_debug_fwcore(struct bfa_ioc_s *ioc, void *buf,
 	u32 *offset, int *buflen);
-u32 bfa_ioc_smem_pgnum(struct bfa_ioc_s *ioc, u32 fmaddr);
-u32 bfa_ioc_smem_pgoff(struct bfa_ioc_s *ioc, u32 fmaddr);
 void bfa_ioc_set_fcmode(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_get_fcmode(struct bfa_ioc_s *ioc);
-void bfa_ioc_hbfail_register(struct bfa_ioc_s *ioc,
-	struct bfa_ioc_hbfail_notify_s *notify);
 bfa_boolean_t bfa_ioc_sem_get(void __iomem *sem_reg);
-void bfa_ioc_sem_release(void __iomem *sem_reg);
-void bfa_ioc_hw_sem_release(struct bfa_ioc_s *ioc);
 void bfa_ioc_fwver_get(struct bfa_ioc_s *ioc,
 			struct bfi_ioc_image_hdr_s *fwhdr);
 bfa_boolean_t bfa_ioc_fwver_cmp(struct bfa_ioc_s *ioc,
@@ -381,13 +384,8 @@ bfa_status_t bfa_ioc_fw_stats_clear(struct bfa_ioc_s *ioc);
 /*
  * bfa mfg wwn API functions
  */
-wwn_t bfa_ioc_get_pwwn(struct bfa_ioc_s *ioc);
-wwn_t bfa_ioc_get_nwwn(struct bfa_ioc_s *ioc);
 mac_t bfa_ioc_get_mac(struct bfa_ioc_s *ioc);
-wwn_t bfa_ioc_get_mfg_pwwn(struct bfa_ioc_s *ioc);
-wwn_t bfa_ioc_get_mfg_nwwn(struct bfa_ioc_s *ioc);
 mac_t bfa_ioc_get_mfg_mac(struct bfa_ioc_s *ioc);
-u64 bfa_ioc_get_adid(struct bfa_ioc_s *ioc);
 
 /*
  * F/W Image Size & Chunk
@@ -421,7 +419,7 @@ bfa_cb_image_get_chunk(int type, u32 off)
 		return bfi_image_ct_cna_get_chunk(off);	break;
 	case BFI_IMAGE_CB_FC:
 		return bfi_image_cb_fc_get_chunk(off);	break;
-	default: return 0;
+	default: return NULL;
 	}
 }
 
diff --git a/drivers/scsi/bfa/bfa_ioc_cb.c b/drivers/scsi/bfa/bfa_ioc_cb.c
index 90994504385..e4a0713185b 100644
--- a/drivers/scsi/bfa/bfa_ioc_cb.c
+++ b/drivers/scsi/bfa/bfa_ioc_cb.c
@@ -15,6 +15,7 @@
  * General Public License for more details.
  */
 
+#include "bfad_drv.h"
 #include "bfa_ioc.h"
 #include "bfi_cbreg.h"
 #include "bfa_defs.h"
@@ -29,10 +30,14 @@ static void bfa_ioc_cb_firmware_unlock(struct bfa_ioc_s *ioc);
 static void bfa_ioc_cb_reg_init(struct bfa_ioc_s *ioc);
 static void bfa_ioc_cb_map_port(struct bfa_ioc_s *ioc);
 static void bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix);
-static void bfa_ioc_cb_notify_hbfail(struct bfa_ioc_s *ioc);
+static void bfa_ioc_cb_notify_fail(struct bfa_ioc_s *ioc);
 static void bfa_ioc_cb_ownership_reset(struct bfa_ioc_s *ioc);
+static void bfa_ioc_cb_sync_join(struct bfa_ioc_s *ioc);
+static void bfa_ioc_cb_sync_leave(struct bfa_ioc_s *ioc);
+static void bfa_ioc_cb_sync_ack(struct bfa_ioc_s *ioc);
+static bfa_boolean_t bfa_ioc_cb_sync_complete(struct bfa_ioc_s *ioc);
 
-struct bfa_ioc_hwif_s hwif_cb;
+static struct bfa_ioc_hwif_s hwif_cb;
 
 /*
  * Called from bfa_ioc_attach() to map asic specific calls.
@@ -46,8 +51,12 @@ bfa_ioc_set_cb_hwif(struct bfa_ioc_s *ioc)
 	hwif_cb.ioc_reg_init = bfa_ioc_cb_reg_init;
 	hwif_cb.ioc_map_port = bfa_ioc_cb_map_port;
 	hwif_cb.ioc_isr_mode_set = bfa_ioc_cb_isr_mode_set;
-	hwif_cb.ioc_notify_hbfail = bfa_ioc_cb_notify_hbfail;
+	hwif_cb.ioc_notify_fail = bfa_ioc_cb_notify_fail;
 	hwif_cb.ioc_ownership_reset = bfa_ioc_cb_ownership_reset;
+	hwif_cb.ioc_sync_join = bfa_ioc_cb_sync_join;
+	hwif_cb.ioc_sync_leave = bfa_ioc_cb_sync_leave;
+	hwif_cb.ioc_sync_ack = bfa_ioc_cb_sync_ack;
+	hwif_cb.ioc_sync_complete = bfa_ioc_cb_sync_complete;
 
 	ioc->ioc_hwif = &hwif_cb;
 }
@@ -58,6 +67,21 @@ bfa_ioc_set_cb_hwif(struct bfa_ioc_s *ioc)
 static bfa_boolean_t
 bfa_ioc_cb_firmware_lock(struct bfa_ioc_s *ioc)
 {
+	struct bfi_ioc_image_hdr_s fwhdr;
+	uint32_t fwstate = readl(ioc->ioc_regs.ioc_fwstate);
+
+	if (fwstate == BFI_IOC_UNINIT)
+		return BFA_TRUE;
+
+	bfa_ioc_fwver_get(ioc, &fwhdr);
+
+	if (swab32(fwhdr.exec) == BFI_BOOT_TYPE_NORMAL)
+		return BFA_TRUE;
+
+	bfa_trc(ioc, fwstate);
+	bfa_trc(ioc, fwhdr.exec);
+	writel(BFI_IOC_UNINIT, ioc->ioc_regs.ioc_fwstate);
+
 	return BFA_TRUE;
 }
 
@@ -70,7 +94,7 @@ bfa_ioc_cb_firmware_unlock(struct bfa_ioc_s *ioc)
  * Notify other functions on HB failure.
  */
 static void
-bfa_ioc_cb_notify_hbfail(struct bfa_ioc_s *ioc)
+bfa_ioc_cb_notify_fail(struct bfa_ioc_s *ioc)
 {
 	writel(__PSS_ERR_STATUS_SET, ioc->ioc_regs.err_set);
 	readl(ioc->ioc_regs.err_set);
@@ -108,9 +132,11 @@ bfa_ioc_cb_reg_init(struct bfa_ioc_s *ioc)
 	if (ioc->port_id == 0) {
 		ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
 		ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
+		ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC1_STATE_REG;
 	} else {
 		ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
 		ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
+		ioc->ioc_regs.alt_ioc_fwstate = (rb + BFA_IOC0_STATE_REG);
 	}
 
 	/*
@@ -181,10 +207,71 @@ bfa_ioc_cb_ownership_reset(struct bfa_ioc_s *ioc)
 	 * will lock it instead of clearing it.
 	 */
 	readl(ioc->ioc_regs.ioc_sem_reg);
-	bfa_ioc_hw_sem_release(ioc);
+	writel(1, ioc->ioc_regs.ioc_sem_reg);
 }
 
+/*
+ * Synchronized IOC failure processing routines
+ */
+static void
+bfa_ioc_cb_sync_join(struct bfa_ioc_s *ioc)
+{
+}
 
+static void
+bfa_ioc_cb_sync_leave(struct bfa_ioc_s *ioc)
+{
+}
+
+static void
+bfa_ioc_cb_sync_ack(struct bfa_ioc_s *ioc)
+{
+	writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate);
+}
+
+static bfa_boolean_t
+bfa_ioc_cb_sync_complete(struct bfa_ioc_s *ioc)
+{
+	uint32_t fwstate, alt_fwstate;
+	fwstate = readl(ioc->ioc_regs.ioc_fwstate);
+
+	/*
+	 * At this point, this IOC is hoding the hw sem in the
+	 * start path (fwcheck) OR in the disable/enable path
+	 * OR to check if the other IOC has acknowledged failure.
+	 *
+	 * So, this IOC can be in UNINIT, INITING, DISABLED, FAIL
+	 * or in MEMTEST states. In a normal scenario, this IOC
+	 * can not be in OP state when this function is called.
+	 *
+	 * However, this IOC could still be in OP state when
+	 * the OS driver is starting up, if the OptROM code has
+	 * left it in that state.
+	 *
+	 * If we had marked this IOC's fwstate as BFI_IOC_FAIL
+	 * in the failure case and now, if the fwstate is not
+	 * BFI_IOC_FAIL it implies that the other PCI fn have
+	 * reinitialized the ASIC or this IOC got disabled, so
+	 * return TRUE.
+	 */
+	if (fwstate == BFI_IOC_UNINIT ||
+		fwstate == BFI_IOC_INITING ||
+		fwstate == BFI_IOC_DISABLED ||
+		fwstate == BFI_IOC_MEMTEST ||
+		fwstate == BFI_IOC_OP)
+		return BFA_TRUE;
+	else {
+		alt_fwstate = readl(ioc->ioc_regs.alt_ioc_fwstate);
+		if (alt_fwstate == BFI_IOC_FAIL ||
+			alt_fwstate == BFI_IOC_DISABLED ||
+			alt_fwstate == BFI_IOC_UNINIT ||
+			alt_fwstate == BFI_IOC_INITING ||
+			alt_fwstate == BFI_IOC_MEMTEST)
+			return BFA_TRUE;
+		else
+			return BFA_FALSE;
+	}
+}
 
 bfa_status_t
 bfa_ioc_cb_pll_init(void __iomem *rb, bfa_boolean_t fcmode)
diff --git a/drivers/scsi/bfa/bfa_ioc_ct.c b/drivers/scsi/bfa/bfa_ioc_ct.c
index 115730c0aa7..008d129ddfc 100644
--- a/drivers/scsi/bfa/bfa_ioc_ct.c
+++ b/drivers/scsi/bfa/bfa_ioc_ct.c
@@ -15,12 +15,22 @@
  * General Public License for more details.
  */
 
+#include "bfad_drv.h"
 #include "bfa_ioc.h"
 #include "bfi_ctreg.h"
 #include "bfa_defs.h"
 
 BFA_TRC_FILE(CNA, IOC_CT);
 
+#define bfa_ioc_ct_sync_pos(__ioc)      \
+		((uint32_t) (1 << bfa_ioc_pcifn(__ioc)))
+#define BFA_IOC_SYNC_REQD_SH    16
+#define bfa_ioc_ct_get_sync_ackd(__val) (__val & 0x0000ffff)
+#define bfa_ioc_ct_clear_sync_ackd(__val)       (__val & 0xffff0000)
+#define bfa_ioc_ct_get_sync_reqd(__val) (__val >> BFA_IOC_SYNC_REQD_SH)
+#define bfa_ioc_ct_sync_reqd_pos(__ioc) \
+			(bfa_ioc_ct_sync_pos(__ioc) << BFA_IOC_SYNC_REQD_SH)
+
 /*
  * forward declarations
  */
@@ -29,10 +39,14 @@ static void bfa_ioc_ct_firmware_unlock(struct bfa_ioc_s *ioc);
 static void bfa_ioc_ct_reg_init(struct bfa_ioc_s *ioc);
 static void bfa_ioc_ct_map_port(struct bfa_ioc_s *ioc);
 static void bfa_ioc_ct_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix);
-static void bfa_ioc_ct_notify_hbfail(struct bfa_ioc_s *ioc);
+static void bfa_ioc_ct_notify_fail(struct bfa_ioc_s *ioc);
 static void bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc);
+static void bfa_ioc_ct_sync_join(struct bfa_ioc_s *ioc);
+static void bfa_ioc_ct_sync_leave(struct bfa_ioc_s *ioc);
+static void bfa_ioc_ct_sync_ack(struct bfa_ioc_s *ioc);
+static bfa_boolean_t bfa_ioc_ct_sync_complete(struct bfa_ioc_s *ioc);
 
-struct bfa_ioc_hwif_s hwif_ct;
+static struct bfa_ioc_hwif_s hwif_ct;
 
 /*
  * Called from bfa_ioc_attach() to map asic specific calls.
@@ -46,8 +60,12 @@ bfa_ioc_set_ct_hwif(struct bfa_ioc_s *ioc)
 	hwif_ct.ioc_reg_init = bfa_ioc_ct_reg_init;
 	hwif_ct.ioc_map_port = bfa_ioc_ct_map_port;
 	hwif_ct.ioc_isr_mode_set = bfa_ioc_ct_isr_mode_set;
-	hwif_ct.ioc_notify_hbfail = bfa_ioc_ct_notify_hbfail;
+	hwif_ct.ioc_notify_fail = bfa_ioc_ct_notify_fail;
 	hwif_ct.ioc_ownership_reset = bfa_ioc_ct_ownership_reset;
+	hwif_ct.ioc_sync_join = bfa_ioc_ct_sync_join;
+	hwif_ct.ioc_sync_leave = bfa_ioc_ct_sync_leave;
+	hwif_ct.ioc_sync_ack = bfa_ioc_ct_sync_ack;
+	hwif_ct.ioc_sync_complete = bfa_ioc_ct_sync_complete;
 
 	ioc->ioc_hwif = &hwif_ct;
 }
@@ -83,7 +101,8 @@ bfa_ioc_ct_firmware_lock(struct bfa_ioc_s *ioc)
 	 */
 	if (usecnt == 0) {
 		writel(1, ioc->ioc_regs.ioc_usage_reg);
-		bfa_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+		writel(1, ioc->ioc_regs.ioc_usage_sem_reg);
+		writel(0, ioc->ioc_regs.ioc_fail_sync);
 		bfa_trc(ioc, usecnt);
 		return BFA_TRUE;
 	}
@@ -94,14 +113,14 @@ bfa_ioc_ct_firmware_lock(struct bfa_ioc_s *ioc)
 	/*
 	 * Use count cannot be non-zero and chip in uninitialized state.
 	 */
-	bfa_assert(ioc_fwstate != BFI_IOC_UNINIT);
+	WARN_ON(ioc_fwstate == BFI_IOC_UNINIT);
 
 	/*
 	 * Check if another driver with a different firmware is active
 	 */
 	bfa_ioc_fwver_get(ioc, &fwhdr);
 	if (!bfa_ioc_fwver_cmp(ioc, &fwhdr)) {
-		bfa_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+		writel(1, ioc->ioc_regs.ioc_usage_sem_reg);
 		bfa_trc(ioc, usecnt);
 		return BFA_FALSE;
 	}
@@ -111,7 +130,7 @@ bfa_ioc_ct_firmware_lock(struct bfa_ioc_s *ioc)
 	 */
 	usecnt++;
 	writel(usecnt, ioc->ioc_regs.ioc_usage_reg);
-	bfa_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+	writel(1, ioc->ioc_regs.ioc_usage_sem_reg);
 	bfa_trc(ioc, usecnt);
 	return BFA_TRUE;
 }
@@ -139,25 +158,27 @@ bfa_ioc_ct_firmware_unlock(struct bfa_ioc_s *ioc)
 	 */
 	bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
 	usecnt = readl(ioc->ioc_regs.ioc_usage_reg);
-	bfa_assert(usecnt > 0);
+	WARN_ON(usecnt <= 0);
 
 	usecnt--;
 	writel(usecnt, ioc->ioc_regs.ioc_usage_reg);
 	bfa_trc(ioc, usecnt);
 
-	bfa_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+	writel(1, ioc->ioc_regs.ioc_usage_sem_reg);
 }
 
 /*
  * Notify other functions on HB failure.
  */
 static void
-bfa_ioc_ct_notify_hbfail(struct bfa_ioc_s *ioc)
+bfa_ioc_ct_notify_fail(struct bfa_ioc_s *ioc)
 {
 	if (ioc->cna) {
 		writel(__FW_INIT_HALT_P, ioc->ioc_regs.ll_halt);
+		writel(__FW_INIT_HALT_P, ioc->ioc_regs.alt_ll_halt);
 		/* Wait for halt to take effect */
 		readl(ioc->ioc_regs.ll_halt);
+		readl(ioc->ioc_regs.alt_ll_halt);
 	} else {
 		writel(__PSS_ERR_STATUS_SET, ioc->ioc_regs.err_set);
 		readl(ioc->ioc_regs.err_set);
@@ -209,15 +230,19 @@ bfa_ioc_ct_reg_init(struct bfa_ioc_s *ioc)
 	if (ioc->port_id == 0) {
 		ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
 		ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
+		ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC1_STATE_REG;
 		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].hfn;
 		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].lpu;
 		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
+		ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P1;
 	} else {
 		ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
 		ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
+		ioc->ioc_regs.alt_ioc_fwstate = rb + BFA_IOC0_STATE_REG;
 		ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].hfn;
 		ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].lpu;
 		ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
+		ioc->ioc_regs.alt_ll_halt = rb + FW_INIT_HALT_P0;
 	}
 
 	/*
@@ -235,6 +260,7 @@ bfa_ioc_ct_reg_init(struct bfa_ioc_s *ioc)
 	ioc->ioc_regs.ioc_usage_sem_reg = (rb + HOST_SEM1_REG);
 	ioc->ioc_regs.ioc_init_sem_reg = (rb + HOST_SEM2_REG);
 	ioc->ioc_regs.ioc_usage_reg = (rb + BFA_FW_USE_COUNT);
+	ioc->ioc_regs.ioc_fail_sync = (rb + BFA_IOC_FAIL_SYNC);
 
 	/*
 	 * sram memory access
@@ -313,7 +339,7 @@ bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc)
 	if (ioc->cna) {
 		bfa_ioc_sem_get(ioc->ioc_regs.ioc_usage_sem_reg);
 		writel(0, ioc->ioc_regs.ioc_usage_reg);
-		bfa_ioc_sem_release(ioc->ioc_regs.ioc_usage_sem_reg);
+		writel(1, ioc->ioc_regs.ioc_usage_sem_reg);
 	}
 
 	/*
@@ -322,10 +348,80 @@ bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc)
 	 * will lock it instead of clearing it.
 	 */
 	readl(ioc->ioc_regs.ioc_sem_reg);
-	bfa_ioc_hw_sem_release(ioc);
+	writel(1, ioc->ioc_regs.ioc_sem_reg);
+}
+
+/*
+ * Synchronized IOC failure processing routines
+ */
+static void
+bfa_ioc_ct_sync_join(struct bfa_ioc_s *ioc)
+{
+	uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync);
+	uint32_t sync_pos = bfa_ioc_ct_sync_reqd_pos(ioc);
+
+	writel((r32 | sync_pos), ioc->ioc_regs.ioc_fail_sync);
+}
+
+static void
+bfa_ioc_ct_sync_leave(struct bfa_ioc_s *ioc)
+{
+	uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync);
+	uint32_t sync_msk = bfa_ioc_ct_sync_reqd_pos(ioc) |
+					bfa_ioc_ct_sync_pos(ioc);
+
+	writel((r32 & ~sync_msk), ioc->ioc_regs.ioc_fail_sync);
+}
+
+static void
+bfa_ioc_ct_sync_ack(struct bfa_ioc_s *ioc)
+{
+	uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync);
+
+	writel((r32 | bfa_ioc_ct_sync_pos(ioc)),
+		ioc->ioc_regs.ioc_fail_sync);
 }
 
+static bfa_boolean_t
+bfa_ioc_ct_sync_complete(struct bfa_ioc_s *ioc)
+{
+	uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync);
+	uint32_t sync_reqd = bfa_ioc_ct_get_sync_reqd(r32);
+	uint32_t sync_ackd = bfa_ioc_ct_get_sync_ackd(r32);
+	uint32_t tmp_ackd;
+
+	if (sync_ackd == 0)
+		return BFA_TRUE;
+
+	/*
+	 * The check below is to see whether any other PCI fn
+	 * has reinitialized the ASIC (reset sync_ackd bits)
+	 * and failed again while this IOC was waiting for hw
+	 * semaphore (in bfa_iocpf_sm_semwait()).
+	 */
+	tmp_ackd = sync_ackd;
+	if ((sync_reqd &  bfa_ioc_ct_sync_pos(ioc)) &&
+		!(sync_ackd & bfa_ioc_ct_sync_pos(ioc)))
+		sync_ackd |= bfa_ioc_ct_sync_pos(ioc);
+
+	if (sync_reqd == sync_ackd) {
+		writel(bfa_ioc_ct_clear_sync_ackd(r32),
+			ioc->ioc_regs.ioc_fail_sync);
+		writel(BFI_IOC_FAIL, ioc->ioc_regs.ioc_fwstate);
+		writel(BFI_IOC_FAIL, ioc->ioc_regs.alt_ioc_fwstate);
+		return BFA_TRUE;
+	}
+
+	/*
+	 * If another PCI fn reinitialized and failed again while
+	 * this IOC was waiting for hw sem, the sync_ackd bit for
+	 * this IOC need to be set again to allow reinitialization.
+	 */
+	if (tmp_ackd != sync_ackd)
+		writel((r32 | sync_ackd), ioc->ioc_regs.ioc_fail_sync);
 
+	return BFA_FALSE;
+}
 
 /*
  * Check the firmware state to know if pll_init has been completed already
diff --git a/drivers/scsi/bfa/bfa_modules.h b/drivers/scsi/bfa/bfa_modules.h
index 15407ab39e7..ab79ff6fdee 100644
--- a/drivers/scsi/bfa/bfa_modules.h
+++ b/drivers/scsi/bfa/bfa_modules.h
@@ -99,7 +99,6 @@ struct bfa_module_s {
 	void (*iocdisable) (struct bfa_s *bfa);
 };
 
-extern struct bfa_module_s *hal_mods[];
 
 struct bfa_s {
 	void			*bfad;		/*  BFA driver instance    */
@@ -116,8 +115,6 @@ struct bfa_s {
 	struct bfa_msix_s	msix;
 };
 
-extern bfa_isr_func_t bfa_isrs[BFI_MC_MAX];
-extern bfa_ioc_mbox_mcfunc_t  bfa_mbox_isrs[];
 extern bfa_boolean_t bfa_auto_recover;
 extern struct bfa_module_s hal_mod_sgpg;
 extern struct bfa_module_s hal_mod_fcport;
diff --git a/drivers/scsi/bfa/bfa_os_inc.h b/drivers/scsi/bfa/bfa_os_inc.h
deleted file mode 100644
index 65df62ef437..00000000000
--- a/drivers/scsi/bfa/bfa_os_inc.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
- * All rights reserved
- * www.brocade.com
- *
- * Linux driver for Brocade Fibre Channel Host Bus Adapter.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License (GPL) Version 2 as
- * published by the Free Software Foundation
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- */
-
-#ifndef __BFA_OS_INC_H__
-#define __BFA_OS_INC_H__
-
-#include <linux/types.h>
-#include <linux/version.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/idr.h>
-#include <linux/interrupt.h>
-#include <linux/cdev.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/vmalloc.h>
-#include <linux/workqueue.h>
-#include <linux/bitops.h>
-#include <scsi/scsi.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsi_tcq.h>
-#include <scsi/scsi_transport_fc.h>
-#include <scsi/scsi_transport.h>
-
-#ifdef __BIG_ENDIAN
-#define __BIGENDIAN
-#endif
-
-static inline u64 bfa_os_get_log_time(void)
-{
-	u64 system_time = 0;
-	struct timeval tv;
-	do_gettimeofday(&tv);
-
-	/* We are interested in seconds only. */
-	system_time = tv.tv_sec;
-	return system_time;
-}
-
-#define bfa_io_lat_clock_res_div HZ
-#define bfa_io_lat_clock_res_mul 1000
-
-#define BFA_LOG(level, bfad, mask, fmt, arg...)				\
-do {									\
-	if (((mask) == 4) || (level[1] <= '4'))				\
-		dev_printk(level, &((bfad)->pcidev)->dev, fmt, ##arg);	\
-} while (0)
-
-#define bfa_swap_3b(_x)				\
-	((((_x) & 0xff) << 16) |		\
-	((_x) & 0x00ff00) |			\
-	(((_x) & 0xff0000) >> 16))
-
-#define bfa_os_swap_sgaddr(_x)  ((u64)(                                 \
-	(((u64)(_x) & (u64)0x00000000000000ffull) << 32)        |       \
-	(((u64)(_x) & (u64)0x000000000000ff00ull) << 32)        |       \
-	(((u64)(_x) & (u64)0x0000000000ff0000ull) << 32)        |       \
-	(((u64)(_x) & (u64)0x00000000ff000000ull) << 32)        |       \
-	(((u64)(_x) & (u64)0x000000ff00000000ull) >> 32)        |       \
-	(((u64)(_x) & (u64)0x0000ff0000000000ull) >> 32)        |       \
-	(((u64)(_x) & (u64)0x00ff000000000000ull) >> 32)        |       \
-	(((u64)(_x) & (u64)0xff00000000000000ull) >> 32)))
-
-#ifndef __BIGENDIAN
-#define bfa_os_hton3b(_x)  bfa_swap_3b(_x)
-#define bfa_os_sgaddr(_x)  (_x)
-#else
-#define bfa_os_hton3b(_x)  (_x)
-#define bfa_os_sgaddr(_x)  bfa_os_swap_sgaddr(_x)
-#endif
-
-#define bfa_os_ntoh3b(_x)  bfa_os_hton3b(_x)
-#define bfa_os_u32(__pa64) ((__pa64) >> 32)
-
-#define BFA_TRC_TS(_trcm)				\
-	({						\
-		struct timeval tv;			\
-							\
-		do_gettimeofday(&tv);			\
-		(tv.tv_sec*1000000+tv.tv_usec);		\
-	 })
-
-#define boolean_t int
-
-/*
- * For current time stamp, OS API will fill-in
- */
-struct bfa_timeval_s {
-	u32	tv_sec;		/*  seconds        */
-	u32	tv_usec;	/*  microseconds   */
-};
-
-static inline void
-bfa_os_gettimeofday(struct bfa_timeval_s *tv)
-{
-	struct timeval  tmp_tv;
-
-	do_gettimeofday(&tmp_tv);
-	tv->tv_sec = (u32) tmp_tv.tv_sec;
-	tv->tv_usec = (u32) tmp_tv.tv_usec;
-}
-
-static inline void
-wwn2str(char *wwn_str, u64 wwn)
-{
-	union {
-		u64 wwn;
-		u8 byte[8];
-	} w;
-
-	w.wwn = wwn;
-	sprintf(wwn_str, "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x", w.byte[0],
-		w.byte[1], w.byte[2], w.byte[3], w.byte[4], w.byte[5],
-		w.byte[6], w.byte[7]);
-}
-
-static inline void
-fcid2str(char *fcid_str, u32 fcid)
-{
-	union {
-		u32 fcid;
-		u8 byte[4];
-	} f;
-
-	f.fcid = fcid;
-	sprintf(fcid_str, "%02x:%02x:%02x", f.byte[1], f.byte[2], f.byte[3]);
-}
-
-#endif /* __BFA_OS_INC_H__ */
diff --git a/drivers/scsi/bfa/bfa_plog.h b/drivers/scsi/bfa/bfa_plog.h
index 501f0ed35cf..1c9baa68339 100644
--- a/drivers/scsi/bfa/bfa_plog.h
+++ b/drivers/scsi/bfa/bfa_plog.h
@@ -151,9 +151,5 @@ void bfa_plog_fchdr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
 void bfa_plog_fchdr_and_pl(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
 			enum bfa_plog_eid event, u16 misc,
 			struct fchs_s *fchdr, u32 pld_w0);
-void bfa_plog_clear(struct bfa_plog_s *plog);
-void bfa_plog_enable(struct bfa_plog_s *plog);
-void bfa_plog_disable(struct bfa_plog_s *plog);
-bfa_boolean_t	bfa_plog_get_setting(struct bfa_plog_s *plog);
 
 #endif /* __BFA_PORTLOG_H__ */
diff --git a/drivers/scsi/bfa/bfa_port.c b/drivers/scsi/bfa/bfa_port.c
index fff96226a38..3f8e9d6066e 100644
--- a/drivers/scsi/bfa/bfa_port.c
+++ b/drivers/scsi/bfa/bfa_port.c
@@ -15,6 +15,7 @@
  * General Public License for more details.
  */
 
+#include "bfad_drv.h"
 #include "bfa_defs_svc.h"
 #include "bfa_port.h"
 #include "bfi.h"
@@ -29,14 +30,14 @@ static void
 bfa_port_stats_swap(struct bfa_port_s *port, union bfa_port_stats_u *stats)
 {
 	u32    *dip = (u32 *) stats;
-	u32    t0, t1;
+	__be32    t0, t1;
 	int	    i;
 
 	for (i = 0; i < sizeof(union bfa_port_stats_u)/sizeof(u32);
 		i += 2) {
 		t0 = dip[i];
 		t1 = dip[i + 1];
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 		dip[i] = be32_to_cpu(t0);
 		dip[i + 1] = be32_to_cpu(t1);
 #else
@@ -96,13 +97,13 @@ bfa_port_get_stats_isr(struct bfa_port_s *port, bfa_status_t status)
 	port->stats_busy = BFA_FALSE;
 
 	if (status == BFA_STATUS_OK) {
-		struct bfa_timeval_s tv;
+		struct timeval tv;
 
 		memcpy(port->stats, port->stats_dma.kva,
 		       sizeof(union bfa_port_stats_u));
 		bfa_port_stats_swap(port, port->stats);
 
-		bfa_os_gettimeofday(&tv);
+		do_gettimeofday(&tv);
 		port->stats->fc.secs_reset = tv.tv_sec - port->stats_reset_time;
 	}
 
@@ -124,7 +125,7 @@ bfa_port_get_stats_isr(struct bfa_port_s *port, bfa_status_t status)
 static void
 bfa_port_clear_stats_isr(struct bfa_port_s *port, bfa_status_t status)
 {
-	struct bfa_timeval_s tv;
+	struct timeval tv;
 
 	port->stats_status = status;
 	port->stats_busy   = BFA_FALSE;
@@ -132,7 +133,7 @@ bfa_port_clear_stats_isr(struct bfa_port_s *port, bfa_status_t status)
 	/*
 	* re-initialize time stamp for stats reset
 	*/
-	bfa_os_gettimeofday(&tv);
+	do_gettimeofday(&tv);
 	port->stats_reset_time = tv.tv_sec;
 
 	if (port->stats_cbfn) {
@@ -185,7 +186,7 @@ bfa_port_isr(void *cbarg, struct bfi_mbmsg_s *m)
 		break;
 
 	default:
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
 
@@ -432,9 +433,9 @@ void
 bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc,
 		 void *dev, struct bfa_trc_mod_s *trcmod)
 {
-	struct bfa_timeval_s tv;
+	struct timeval tv;
 
-	bfa_assert(port);
+	WARN_ON(!port);
 
 	port->dev    = dev;
 	port->ioc    = ioc;
@@ -447,27 +448,13 @@ bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc,
 
 	bfa_ioc_mbox_regisr(port->ioc, BFI_MC_PORT, bfa_port_isr, port);
 	bfa_ioc_hbfail_init(&port->hbfail, bfa_port_hbfail, port);
-	bfa_ioc_hbfail_register(port->ioc, &port->hbfail);
+	list_add_tail(&port->hbfail.qe, &port->ioc->hb_notify_q);
 
 	/*
 	 * initialize time stamp for stats reset
 	 */
-	bfa_os_gettimeofday(&tv);
+	do_gettimeofday(&tv);
 	port->stats_reset_time = tv.tv_sec;
 
 	bfa_trc(port, 0);
 }
-
-/*
- * bfa_port_detach()
- *
- *
- * @param[in] port - Pointer to the Port module data structure
- *
- * @return void
- */
-void
-bfa_port_detach(struct bfa_port_s *port)
-{
-	bfa_trc(port, 0);
-}
diff --git a/drivers/scsi/bfa/bfa_port.h b/drivers/scsi/bfa/bfa_port.h
index dbce9dfd056..c4ee9db6b47 100644
--- a/drivers/scsi/bfa/bfa_port.h
+++ b/drivers/scsi/bfa/bfa_port.h
@@ -48,7 +48,6 @@ struct bfa_port_s {
 
 void	     bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc,
 				void *dev, struct bfa_trc_mod_s *trcmod);
-void	     bfa_port_detach(struct bfa_port_s *port);
 void	     bfa_port_hbfail(void *arg);
 
 bfa_status_t bfa_port_get_stats(struct bfa_port_s *port,
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index c768143f480..1d34921f88b 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -15,11 +15,10 @@
  * General Public License for more details.
  */
 
-#include "bfa_os_inc.h"
+#include "bfad_drv.h"
 #include "bfa_plog.h"
 #include "bfa_cs.h"
 #include "bfa_modules.h"
-#include "bfad_drv.h"
 
 BFA_TRC_FILE(HAL, FCXP);
 BFA_MODULE(fcxp);
@@ -41,19 +40,6 @@ BFA_MODULE(uf);
 #define BFA_LPS_MAX_VPORTS_SUPP_CB  255
 #define BFA_LPS_MAX_VPORTS_SUPP_CT  190
 
-/*
- *  lps_pvt BFA LPS private functions
- */
-
-enum bfa_lps_event {
-	BFA_LPS_SM_LOGIN	= 1,	/* login request from user	*/
-	BFA_LPS_SM_LOGOUT	= 2,	/* logout request from user	*/
-	BFA_LPS_SM_FWRSP	= 3,	/* f/w response to login/logout	*/
-	BFA_LPS_SM_RESUME	= 4,	/* space present in reqq queue	*/
-	BFA_LPS_SM_DELETE	= 5,	/* lps delete from user		*/
-	BFA_LPS_SM_OFFLINE	= 6,	/* Link is offline		*/
-	BFA_LPS_SM_RX_CVL	= 7,	/* Rx clear virtual link	*/
-};
 
 /*
  * FC PORT related definitions
@@ -66,7 +52,6 @@ enum bfa_lps_event {
 	((bfa_fcport_is_disabled(bfa) == BFA_TRUE) || \
 	(bfa_ioc_is_disabled(&bfa->ioc) == BFA_TRUE))
 
-
 /*
  * BFA port state machine events
  */
@@ -113,19 +98,6 @@ enum bfa_fcport_ln_sm_event {
 		}							\
 } while (0)
 
-
-enum bfa_rport_event {
-	BFA_RPORT_SM_CREATE	= 1,	/*  rport create event		*/
-	BFA_RPORT_SM_DELETE	= 2,	/*  deleting an existing rport	*/
-	BFA_RPORT_SM_ONLINE	= 3,	/*  rport is online		*/
-	BFA_RPORT_SM_OFFLINE	= 4,	/*  rport is offline		*/
-	BFA_RPORT_SM_FWRSP	= 5,	/*  firmware response		*/
-	BFA_RPORT_SM_HWFAIL	= 6,	/*  IOC h/w failure		*/
-	BFA_RPORT_SM_QOS_SCN	= 7,	/*  QoS SCN from firmware	*/
-	BFA_RPORT_SM_SET_SPEED	= 8,	/*  Set Rport Speed		*/
-	BFA_RPORT_SM_QRESUME	= 9,	/*  space in requeue queue	*/
-};
-
 /*
  * forward declarations FCXP related functions
  */
@@ -159,6 +131,7 @@ static void bfa_lps_reqq_resume(void *lps_arg);
 static void bfa_lps_free(struct bfa_lps_s *lps);
 static void bfa_lps_send_login(struct bfa_lps_s *lps);
 static void bfa_lps_send_logout(struct bfa_lps_s *lps);
+static void bfa_lps_send_set_n2n_pid(struct bfa_lps_s *lps);
 static void bfa_lps_login_comp(struct bfa_lps_s *lps);
 static void bfa_lps_logout_comp(struct bfa_lps_s *lps);
 static void bfa_lps_cvl_event(struct bfa_lps_s *lps);
@@ -171,6 +144,8 @@ static void bfa_lps_sm_login(struct bfa_lps_s *lps, enum bfa_lps_event event);
 static void bfa_lps_sm_loginwait(struct bfa_lps_s *lps, enum bfa_lps_event
 					event);
 static void bfa_lps_sm_online(struct bfa_lps_s *lps, enum bfa_lps_event event);
+static void bfa_lps_sm_online_n2n_pid_wait(struct bfa_lps_s *lps,
+					enum bfa_lps_event event);
 static void bfa_lps_sm_logout(struct bfa_lps_s *lps, enum bfa_lps_event event);
 static void bfa_lps_sm_logowait(struct bfa_lps_s *lps, enum bfa_lps_event
 					event);
@@ -312,6 +287,18 @@ plkd_validate_logrec(struct bfa_plog_rec_s *pl_rec)
 	return 0;
 }
 
+static u64
+bfa_get_log_time(void)
+{
+	u64 system_time = 0;
+	struct timeval tv;
+	do_gettimeofday(&tv);
+
+	/* We are interested in seconds only. */
+	system_time = tv.tv_sec;
+	return system_time;
+}
+
 static void
 bfa_plog_add(struct bfa_plog_s *plog, struct bfa_plog_rec_s *pl_rec)
 {
@@ -322,7 +309,7 @@ bfa_plog_add(struct bfa_plog_s *plog, struct bfa_plog_rec_s *pl_rec)
 		return;
 
 	if (plkd_validate_logrec(pl_rec)) {
-		bfa_assert(0);
+		WARN_ON(1);
 		return;
 	}
 
@@ -332,7 +319,7 @@ bfa_plog_add(struct bfa_plog_s *plog, struct bfa_plog_rec_s *pl_rec)
 
 	memcpy(pl_recp, pl_rec, sizeof(struct bfa_plog_rec_s));
 
-	pl_recp->tv = bfa_os_get_log_time();
+	pl_recp->tv = bfa_get_log_time();
 	BFA_PL_LOG_REC_INCR(plog->tail);
 
 	if (plog->head == plog->tail)
@@ -437,29 +424,6 @@ bfa_plog_fchdr_and_pl(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
 	}
 }
 
-void
-bfa_plog_clear(struct bfa_plog_s *plog)
-{
-	plog->head = plog->tail = 0;
-}
-
-void
-bfa_plog_enable(struct bfa_plog_s *plog)
-{
-	plog->plog_enabled = 1;
-}
-
-void
-bfa_plog_disable(struct bfa_plog_s *plog)
-{
-	plog->plog_enabled = 0;
-}
-
-bfa_boolean_t
-bfa_plog_get_setting(struct bfa_plog_s *plog)
-{
-	return (bfa_boolean_t)plog->plog_enabled;
-}
 
 /*
  *  fcxp_pvt BFA FCXP private functions
@@ -637,15 +601,15 @@ bfa_fcxp_init_reqrsp(struct bfa_fcxp_s *fcxp,
 	       bfa_fcxp_get_sglen_t sglen_cbfn)
 {
 
-	bfa_assert(bfa != NULL);
+	WARN_ON(bfa == NULL);
 
 	bfa_trc(bfa, fcxp->fcxp_tag);
 
 	if (n_sgles == 0) {
 		*use_ibuf = 1;
 	} else {
-		bfa_assert(*sga_cbfn != NULL);
-		bfa_assert(*sglen_cbfn != NULL);
+		WARN_ON(*sga_cbfn == NULL);
+		WARN_ON(*sglen_cbfn == NULL);
 
 		*use_ibuf = 0;
 		*r_sga_cbfn = sga_cbfn;
@@ -657,7 +621,7 @@ bfa_fcxp_init_reqrsp(struct bfa_fcxp_s *fcxp,
 		 * alloc required sgpgs
 		 */
 		if (n_sgles > BFI_SGE_INLINE)
-			bfa_assert(0);
+			WARN_ON(1);
 	}
 
 }
@@ -671,7 +635,7 @@ bfa_fcxp_init(struct bfa_fcxp_s *fcxp,
 	       bfa_fcxp_get_sglen_t rsp_sglen_cbfn)
 {
 
-	bfa_assert(bfa != NULL);
+	WARN_ON(bfa == NULL);
 
 	bfa_trc(bfa, fcxp->fcxp_tag);
 
@@ -708,7 +672,7 @@ bfa_fcxp_put(struct bfa_fcxp_s *fcxp)
 		return;
 	}
 
-	bfa_assert(bfa_q_is_on_q(&mod->fcxp_active_q, fcxp));
+	WARN_ON(!bfa_q_is_on_q(&mod->fcxp_active_q, fcxp));
 	list_del(&fcxp->qe);
 	list_add_tail(&fcxp->qe, &mod->fcxp_free_q);
 }
@@ -757,7 +721,7 @@ hal_fcxp_send_comp(struct bfa_s *bfa, struct bfi_fcxp_send_rsp_s *fcxp_rsp)
 
 	fcxp = BFA_FCXP_FROM_TAG(mod, fcxp_tag);
 
-	bfa_assert(fcxp->send_cbfn != NULL);
+	WARN_ON(fcxp->send_cbfn == NULL);
 
 	hal_fcxp_rx_plog(mod->bfa, fcxp, fcxp_rsp);
 
@@ -913,13 +877,13 @@ bfa_fcxp_queue(struct bfa_fcxp_s *fcxp, struct bfi_fcxp_send_req_s *send_req)
 					BFA_FCXP_REQ_PLD_PA(fcxp));
 	} else {
 		if (fcxp->nreq_sgles > 0) {
-			bfa_assert(fcxp->nreq_sgles == 1);
+			WARN_ON(fcxp->nreq_sgles != 1);
 			hal_fcxp_set_local_sges(send_req->req_sge,
 						reqi->req_tot_len,
 						fcxp->req_sga_cbfn(fcxp->caller,
 								   0));
 		} else {
-			bfa_assert(reqi->req_tot_len == 0);
+			WARN_ON(reqi->req_tot_len != 0);
 			hal_fcxp_set_local_sges(send_req->rsp_sge, 0, 0);
 		}
 	}
@@ -928,20 +892,20 @@ bfa_fcxp_queue(struct bfa_fcxp_s *fcxp, struct bfi_fcxp_send_req_s *send_req)
 	 * setup rsp sgles
 	 */
 	if (fcxp->use_irspbuf == 1) {
-		bfa_assert(rspi->rsp_maxlen <= BFA_FCXP_MAX_LBUF_SZ);
+		WARN_ON(rspi->rsp_maxlen > BFA_FCXP_MAX_LBUF_SZ);
 
 		hal_fcxp_set_local_sges(send_req->rsp_sge, rspi->rsp_maxlen,
 					BFA_FCXP_RSP_PLD_PA(fcxp));
 
 	} else {
 		if (fcxp->nrsp_sgles > 0) {
-			bfa_assert(fcxp->nrsp_sgles == 1);
+			WARN_ON(fcxp->nrsp_sgles != 1);
 			hal_fcxp_set_local_sges(send_req->rsp_sge,
 						rspi->rsp_maxlen,
 						fcxp->rsp_sga_cbfn(fcxp->caller,
 								   0));
 		} else {
-			bfa_assert(rspi->rsp_maxlen == 0);
+			WARN_ON(rspi->rsp_maxlen != 0);
 			hal_fcxp_set_local_sges(send_req->rsp_sge, 0, 0);
 		}
 	}
@@ -955,10 +919,6 @@ bfa_fcxp_queue(struct bfa_fcxp_s *fcxp, struct bfi_fcxp_send_req_s *send_req)
 }
 
 /*
- *  hal_fcxp_api BFA FCXP API
- */
-
-/*
  * Allocate an FCXP instance to send a response or to send a request
  * that has a response. Request/response buffers are allocated by caller.
  *
@@ -990,7 +950,7 @@ bfa_fcxp_alloc(void *caller, struct bfa_s *bfa, int nreq_sgles,
 {
 	struct bfa_fcxp_s *fcxp = NULL;
 
-	bfa_assert(bfa != NULL);
+	WARN_ON(bfa == NULL);
 
 	fcxp = bfa_fcxp_get(BFA_FCXP_MOD(bfa));
 	if (fcxp == NULL)
@@ -1017,7 +977,7 @@ bfa_fcxp_get_reqbuf(struct bfa_fcxp_s *fcxp)
 	struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
 	void	*reqbuf;
 
-	bfa_assert(fcxp->use_ireqbuf == 1);
+	WARN_ON(fcxp->use_ireqbuf != 1);
 	reqbuf = ((u8 *)mod->req_pld_list_kva) +
 		fcxp->fcxp_tag * mod->req_pld_sz;
 	return reqbuf;
@@ -1044,7 +1004,7 @@ bfa_fcxp_get_rspbuf(struct bfa_fcxp_s *fcxp)
 	struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
 	void	*rspbuf;
 
-	bfa_assert(fcxp->use_irspbuf == 1);
+	WARN_ON(fcxp->use_irspbuf != 1);
 
 	rspbuf = ((u8 *)mod->rsp_pld_list_kva) +
 		fcxp->fcxp_tag * mod->rsp_pld_sz;
@@ -1052,7 +1012,7 @@ bfa_fcxp_get_rspbuf(struct bfa_fcxp_s *fcxp)
 }
 
 /*
- *		Free the BFA FCXP
+ * Free the BFA FCXP
  *
  * @param[in]	fcxp			BFA fcxp pointer
  *
@@ -1063,7 +1023,7 @@ bfa_fcxp_free(struct bfa_fcxp_s *fcxp)
 {
 	struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
 
-	bfa_assert(fcxp != NULL);
+	WARN_ON(fcxp == NULL);
 	bfa_trc(mod->bfa, fcxp->fcxp_tag);
 	bfa_fcxp_put(fcxp);
 }
@@ -1142,7 +1102,7 @@ bfa_status_t
 bfa_fcxp_abort(struct bfa_fcxp_s *fcxp)
 {
 	bfa_trc(fcxp->fcxp_mod->bfa, fcxp->fcxp_tag);
-	bfa_assert(0);
+	WARN_ON(1);
 	return BFA_STATUS_OK;
 }
 
@@ -1157,7 +1117,7 @@ bfa_fcxp_alloc_wait(struct bfa_s *bfa, struct bfa_fcxp_wqe_s *wqe,
 {
 	struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
 
-	bfa_assert(list_empty(&mod->fcxp_free_q));
+	WARN_ON(!list_empty(&mod->fcxp_free_q));
 
 	wqe->alloc_cbfn = alloc_cbfn;
 	wqe->alloc_cbarg = alloc_cbarg;
@@ -1178,7 +1138,7 @@ bfa_fcxp_walloc_cancel(struct bfa_s *bfa, struct bfa_fcxp_wqe_s *wqe)
 {
 	struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
 
-	bfa_assert(bfa_q_is_on_q(&mod->wait_q, wqe));
+	WARN_ON(!bfa_q_is_on_q(&mod->wait_q, wqe));
 	list_del(&wqe->qe);
 }
 
@@ -1199,12 +1159,6 @@ bfa_fcxp_discard(struct bfa_fcxp_s *fcxp)
 	fcxp->send_cbfn = bfa_fcxp_null_comp;
 }
 
-
-
-/*
- *  hal_fcxp_public BFA FCXP public functions
- */
-
 void
 bfa_fcxp_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
 {
@@ -1215,7 +1169,7 @@ bfa_fcxp_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
 
 	default:
 		bfa_trc(bfa, msg->mhdr.msg_id);
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
 
@@ -1303,6 +1257,12 @@ bfa_lps_sm_login(struct bfa_lps_s *lps, enum bfa_lps_event event)
 			else
 				bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
 					BFA_PL_EID_LOGIN, 0, "FLOGI Accept");
+			/* If N2N, send the assigned PID to FW */
+			bfa_trc(lps->bfa, lps->fport);
+			bfa_trc(lps->bfa, lps->lp_pid);
+
+			if (!lps->fport && lps->lp_pid)
+				bfa_sm_send_event(lps, BFA_LPS_SM_SET_N2N_PID);
 		} else {
 			bfa_sm_set_state(lps, bfa_lps_sm_init);
 			if (lps->fdisc)
@@ -1321,6 +1281,11 @@ bfa_lps_sm_login(struct bfa_lps_s *lps, enum bfa_lps_event event)
 		bfa_sm_set_state(lps, bfa_lps_sm_init);
 		break;
 
+	case BFA_LPS_SM_SET_N2N_PID:
+		bfa_trc(lps->bfa, lps->fport);
+		bfa_trc(lps->bfa, lps->lp_pid);
+		break;
+
 	default:
 		bfa_sm_fault(lps->bfa, event);
 	}
@@ -1389,9 +1354,59 @@ bfa_lps_sm_online(struct bfa_lps_s *lps, enum bfa_lps_event event)
 			BFA_PL_EID_FIP_FCF_CVL, 0, "FCF Clear Virt. Link Rx");
 		break;
 
+	case BFA_LPS_SM_SET_N2N_PID:
+		if (bfa_reqq_full(lps->bfa, lps->reqq)) {
+			bfa_sm_set_state(lps, bfa_lps_sm_online_n2n_pid_wait);
+			bfa_reqq_wait(lps->bfa, lps->reqq, &lps->wqe);
+		} else
+			bfa_lps_send_set_n2n_pid(lps);
+		break;
+
+	case BFA_LPS_SM_OFFLINE:
+	case BFA_LPS_SM_DELETE:
+		bfa_sm_set_state(lps, bfa_lps_sm_init);
+		break;
+
+	default:
+		bfa_sm_fault(lps->bfa, event);
+	}
+}
+
+/*
+ * login complete
+ */
+static void
+bfa_lps_sm_online_n2n_pid_wait(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+	bfa_trc(lps->bfa, lps->lp_tag);
+	bfa_trc(lps->bfa, event);
+
+	switch (event) {
+	case BFA_LPS_SM_RESUME:
+		bfa_sm_set_state(lps, bfa_lps_sm_online);
+		bfa_lps_send_set_n2n_pid(lps);
+		break;
+
+	case BFA_LPS_SM_LOGOUT:
+		bfa_sm_set_state(lps, bfa_lps_sm_logowait);
+		bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
+			BFA_PL_EID_LOGO, 0, "Logout");
+		break;
+
+	case BFA_LPS_SM_RX_CVL:
+		bfa_sm_set_state(lps, bfa_lps_sm_init);
+		bfa_reqq_wcancel(&lps->wqe);
+
+		/* Let the vport module know about this event */
+		bfa_lps_cvl_event(lps);
+		bfa_plog_str(lps->bfa->plog, BFA_PL_MID_LPS,
+			BFA_PL_EID_FIP_FCF_CVL, 0, "FCF Clear Virt. Link Rx");
+		break;
+
 	case BFA_LPS_SM_OFFLINE:
 	case BFA_LPS_SM_DELETE:
 		bfa_sm_set_state(lps, bfa_lps_sm_init);
+		bfa_reqq_wcancel(&lps->wqe);
 		break;
 
 	default:
@@ -1540,15 +1555,16 @@ bfa_lps_login_rsp(struct bfa_s *bfa, struct bfi_lps_login_rsp_s *rsp)
 	struct bfa_lps_mod_s	*mod = BFA_LPS_MOD(bfa);
 	struct bfa_lps_s	*lps;
 
-	bfa_assert(rsp->lp_tag < mod->num_lps);
+	WARN_ON(rsp->lp_tag >= mod->num_lps);
 	lps = BFA_LPS_FROM_TAG(mod, rsp->lp_tag);
 
 	lps->status = rsp->status;
 	switch (rsp->status) {
 	case BFA_STATUS_OK:
 		lps->fport	= rsp->f_port;
+		if (lps->fport)
+			lps->lp_pid = rsp->lp_pid;
 		lps->npiv_en	= rsp->npiv_en;
-		lps->lp_pid	= rsp->lp_pid;
 		lps->pr_bbcred	= be16_to_cpu(rsp->bb_credit);
 		lps->pr_pwwn	= rsp->port_name;
 		lps->pr_nwwn	= rsp->node_name;
@@ -1587,7 +1603,7 @@ bfa_lps_logout_rsp(struct bfa_s *bfa, struct bfi_lps_logout_rsp_s *rsp)
 	struct bfa_lps_mod_s	*mod = BFA_LPS_MOD(bfa);
 	struct bfa_lps_s	*lps;
 
-	bfa_assert(rsp->lp_tag < mod->num_lps);
+	WARN_ON(rsp->lp_tag >= mod->num_lps);
 	lps = BFA_LPS_FROM_TAG(mod, rsp->lp_tag);
 
 	bfa_sm_send_event(lps, BFA_LPS_SM_FWRSP);
@@ -1640,7 +1656,7 @@ bfa_lps_send_login(struct bfa_lps_s *lps)
 	struct bfi_lps_login_req_s	*m;
 
 	m = bfa_reqq_next(lps->bfa, lps->reqq);
-	bfa_assert(m);
+	WARN_ON(!m);
 
 	bfi_h2i_set(m->mh, BFI_MC_LPS, BFI_LPS_H2I_LOGIN_REQ,
 		bfa_lpuid(lps->bfa));
@@ -1665,7 +1681,7 @@ bfa_lps_send_logout(struct bfa_lps_s *lps)
 	struct bfi_lps_logout_req_s *m;
 
 	m = bfa_reqq_next(lps->bfa, lps->reqq);
-	bfa_assert(m);
+	WARN_ON(!m);
 
 	bfi_h2i_set(m->mh, BFI_MC_LPS, BFI_LPS_H2I_LOGOUT_REQ,
 		bfa_lpuid(lps->bfa));
@@ -1676,6 +1692,25 @@ bfa_lps_send_logout(struct bfa_lps_s *lps)
 }
 
 /*
+ * send n2n pid set request to firmware
+ */
+static void
+bfa_lps_send_set_n2n_pid(struct bfa_lps_s *lps)
+{
+	struct bfi_lps_n2n_pid_req_s *m;
+
+	m = bfa_reqq_next(lps->bfa, lps->reqq);
+	WARN_ON(!m);
+
+	bfi_h2i_set(m->mh, BFI_MC_LPS, BFI_LPS_H2I_N2N_PID_REQ,
+		bfa_lpuid(lps->bfa));
+
+	m->lp_tag = lps->lp_tag;
+	m->lp_pid = lps->lp_pid;
+	bfa_reqq_produce(lps->bfa, lps->reqq);
+}
+
+/*
  * Indirect login completion handler for non-fcs
  */
 static void
@@ -1853,14 +1888,6 @@ bfa_lps_fdisc(struct bfa_lps_s *lps, void *uarg, u16 pdusz, wwn_t pwwn,
 	bfa_sm_send_event(lps, BFA_LPS_SM_LOGIN);
 }
 
-/*
- * Initiate a lport logout (flogi).
- */
-void
-bfa_lps_flogo(struct bfa_lps_s *lps)
-{
-	bfa_sm_send_event(lps, BFA_LPS_SM_LOGOUT);
-}
 
 /*
  * Initiate a lport FDSIC logout.
@@ -1871,24 +1898,6 @@ bfa_lps_fdisclogo(struct bfa_lps_s *lps)
 	bfa_sm_send_event(lps, BFA_LPS_SM_LOGOUT);
 }
 
-/*
- * Discard a pending login request -- should be called only for
- * link down handling.
- */
-void
-bfa_lps_discard(struct bfa_lps_s *lps)
-{
-	bfa_sm_send_event(lps, BFA_LPS_SM_OFFLINE);
-}
-
-/*
- * Return lport services tag
- */
-u8
-bfa_lps_get_tag(struct bfa_lps_s *lps)
-{
-	return lps->lp_tag;
-}
 
 /*
  * Return lport services tag given the pid
@@ -1909,55 +1918,6 @@ bfa_lps_get_tag_from_pid(struct bfa_s *bfa, u32 pid)
 	return 0;
 }
 
-/*
- * return if fabric login indicates support for NPIV
- */
-bfa_boolean_t
-bfa_lps_is_npiv_en(struct bfa_lps_s *lps)
-{
-	return lps->npiv_en;
-}
-
-/*
- * Return TRUE if attached to F-Port, else return FALSE
- */
-bfa_boolean_t
-bfa_lps_is_fport(struct bfa_lps_s *lps)
-{
-	return lps->fport;
-}
-
-/*
- * Return TRUE if attached to a Brocade Fabric
- */
-bfa_boolean_t
-bfa_lps_is_brcd_fabric(struct bfa_lps_s *lps)
-{
-	return lps->brcd_switch;
-}
-/*
- * return TRUE if authentication is required
- */
-bfa_boolean_t
-bfa_lps_is_authreq(struct bfa_lps_s *lps)
-{
-	return lps->auth_req;
-}
-
-bfa_eproto_status_t
-bfa_lps_get_extstatus(struct bfa_lps_s *lps)
-{
-	return lps->ext_status;
-}
-
-/*
- * return port id assigned to the lport
- */
-u32
-bfa_lps_get_pid(struct bfa_lps_s *lps)
-{
-	return lps->lp_pid;
-}
 
 /*
  * return port id assigned to the base lport
@@ -1971,57 +1931,16 @@ bfa_lps_get_base_pid(struct bfa_s *bfa)
 }
 
 /*
- * Return bb_credit assigned in FLOGI response
- */
-u16
-bfa_lps_get_peer_bbcredit(struct bfa_lps_s *lps)
-{
-	return lps->pr_bbcred;
-}
-
-/*
- * Return peer port name
- */
-wwn_t
-bfa_lps_get_peer_pwwn(struct bfa_lps_s *lps)
-{
-	return lps->pr_pwwn;
-}
-
-/*
- * Return peer node name
- */
-wwn_t
-bfa_lps_get_peer_nwwn(struct bfa_lps_s *lps)
-{
-	return lps->pr_nwwn;
-}
-
-/*
- * return reason code if login request is rejected
- */
-u8
-bfa_lps_get_lsrjt_rsn(struct bfa_lps_s *lps)
-{
-	return lps->lsrjt_rsn;
-}
-
-/*
- * return explanation code if login request is rejected
+ * Set PID in case of n2n (which is assigned during PLOGI)
  */
-u8
-bfa_lps_get_lsrjt_expl(struct bfa_lps_s *lps)
+void
+bfa_lps_set_n2n_pid(struct bfa_lps_s *lps, uint32_t n2n_pid)
 {
-	return lps->lsrjt_expl;
-}
+	bfa_trc(lps->bfa, lps->lp_tag);
+	bfa_trc(lps->bfa, n2n_pid);
 
-/*
- * Return fpma/spma MAC for lport
- */
-mac_t
-bfa_lps_get_lp_mac(struct bfa_lps_s *lps)
-{
-	return lps->lp_mac;
+	lps->lp_pid = n2n_pid;
+	bfa_sm_send_event(lps, BFA_LPS_SM_SET_N2N_PID);
 }
 
 /*
@@ -2050,7 +1969,7 @@ bfa_lps_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 
 	default:
 		bfa_trc(bfa, m->mhdr.msg_id);
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
 
@@ -2068,6 +1987,8 @@ bfa_fcport_sm_uninit(struct bfa_fcport_s *fcport,
 		/*
 		 * Start event after IOC is configured and BFA is started.
 		 */
+		fcport->use_flash_cfg = BFA_TRUE;
+
 		if (bfa_fcport_send_enable(fcport)) {
 			bfa_trc(fcport->bfa, BFA_TRUE);
 			bfa_sm_set_state(fcport, bfa_fcport_sm_enabling);
@@ -2138,7 +2059,7 @@ bfa_fcport_sm_enabling_qwait(struct bfa_fcport_s *fcport,
 		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 				BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
 		wwn2str(pwwn_buf, fcport->pwwn);
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 			"Base port disabled: WWN = %s\n", pwwn_buf);
 		break;
 
@@ -2178,7 +2099,7 @@ bfa_fcport_sm_enabling(struct bfa_fcport_s *fcport,
 		bfa_fcport_update_linkinfo(fcport);
 		bfa_sm_set_state(fcport, bfa_fcport_sm_linkup);
 
-		bfa_assert(fcport->event_cbfn);
+		WARN_ON(!fcport->event_cbfn);
 		bfa_fcport_scn(fcport, BFA_PORT_LINKUP, BFA_FALSE);
 		break;
 
@@ -2198,7 +2119,7 @@ bfa_fcport_sm_enabling(struct bfa_fcport_s *fcport,
 		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 				BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
 		wwn2str(pwwn_buf, fcport->pwwn);
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 			"Base port disabled: WWN = %s\n", pwwn_buf);
 		break;
 
@@ -2229,7 +2150,7 @@ bfa_fcport_sm_linkdown(struct bfa_fcport_s *fcport,
 	case BFA_FCPORT_SM_LINKUP:
 		bfa_fcport_update_linkinfo(fcport);
 		bfa_sm_set_state(fcport, bfa_fcport_sm_linkup);
-		bfa_assert(fcport->event_cbfn);
+		WARN_ON(!fcport->event_cbfn);
 		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 				BFA_PL_EID_PORT_ST_CHANGE, 0, "Port Linkup");
 		if (!bfa_ioc_get_fcmode(&fcport->bfa->ioc)) {
@@ -2251,7 +2172,7 @@ bfa_fcport_sm_linkdown(struct bfa_fcport_s *fcport,
 
 		bfa_fcport_scn(fcport, BFA_PORT_LINKUP, BFA_FALSE);
 		wwn2str(pwwn_buf, fcport->pwwn);
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 			"Base port online: WWN = %s\n", pwwn_buf);
 		break;
 
@@ -2277,7 +2198,7 @@ bfa_fcport_sm_linkdown(struct bfa_fcport_s *fcport,
 		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 				BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
 		wwn2str(pwwn_buf, fcport->pwwn);
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 			"Base port disabled: WWN = %s\n", pwwn_buf);
 		break;
 
@@ -2322,9 +2243,9 @@ bfa_fcport_sm_linkup(struct bfa_fcport_s *fcport,
 		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 				BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
 		wwn2str(pwwn_buf, fcport->pwwn);
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 			"Base port offline: WWN = %s\n", pwwn_buf);
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 			"Base port disabled: WWN = %s\n", pwwn_buf);
 		break;
 
@@ -2336,10 +2257,10 @@ bfa_fcport_sm_linkup(struct bfa_fcport_s *fcport,
 				BFA_PL_EID_PORT_ST_CHANGE, 0, "Port Linkdown");
 		wwn2str(pwwn_buf, fcport->pwwn);
 		if (BFA_PORT_IS_DISABLED(fcport->bfa))
-			BFA_LOG(KERN_INFO, bfad, log_level,
+			BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 				"Base port offline: WWN = %s\n", pwwn_buf);
 		else
-			BFA_LOG(KERN_ERR, bfad, log_level,
+			BFA_LOG(KERN_ERR, bfad, bfa_log_level,
 				"Base port (WWN = %s) "
 				"lost fabric connectivity\n", pwwn_buf);
 		break;
@@ -2349,10 +2270,10 @@ bfa_fcport_sm_linkup(struct bfa_fcport_s *fcport,
 		bfa_fcport_reset_linkinfo(fcport);
 		wwn2str(pwwn_buf, fcport->pwwn);
 		if (BFA_PORT_IS_DISABLED(fcport->bfa))
-			BFA_LOG(KERN_INFO, bfad, log_level,
+			BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 				"Base port offline: WWN = %s\n", pwwn_buf);
 		else
-			BFA_LOG(KERN_ERR, bfad, log_level,
+			BFA_LOG(KERN_ERR, bfad, bfa_log_level,
 				"Base port (WWN = %s) "
 				"lost fabric connectivity\n", pwwn_buf);
 		break;
@@ -2363,10 +2284,10 @@ bfa_fcport_sm_linkup(struct bfa_fcport_s *fcport,
 		bfa_fcport_scn(fcport, BFA_PORT_LINKDOWN, BFA_FALSE);
 		wwn2str(pwwn_buf, fcport->pwwn);
 		if (BFA_PORT_IS_DISABLED(fcport->bfa))
-			BFA_LOG(KERN_INFO, bfad, log_level,
+			BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 				"Base port offline: WWN = %s\n", pwwn_buf);
 		else
-			BFA_LOG(KERN_ERR, bfad, log_level,
+			BFA_LOG(KERN_ERR, bfad, bfa_log_level,
 				"Base port (WWN = %s) "
 				"lost fabric connectivity\n", pwwn_buf);
 		break;
@@ -2497,7 +2418,7 @@ bfa_fcport_sm_disabling(struct bfa_fcport_s *fcport,
 		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 				BFA_PL_EID_PORT_ENABLE, 0, "Port Enable");
 		wwn2str(pwwn_buf, fcport->pwwn);
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 			"Base port enabled: WWN = %s\n", pwwn_buf);
 		break;
 
@@ -2551,7 +2472,7 @@ bfa_fcport_sm_disabled(struct bfa_fcport_s *fcport,
 		bfa_plog_str(fcport->bfa->plog, BFA_PL_MID_HAL,
 				BFA_PL_EID_PORT_ENABLE, 0, "Port Enable");
 		wwn2str(pwwn_buf, fcport->pwwn);
-		BFA_LOG(KERN_INFO, bfad, log_level,
+		BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 			"Base port enabled: WWN = %s\n", pwwn_buf);
 		break;
 
@@ -2803,12 +2724,6 @@ bfa_fcport_ln_sm_up_dn_up_nf(struct bfa_fcport_ln_s *ln,
 	}
 }
 
-
-
-/*
- *  hal_port_private
- */
-
 static void
 __bfa_cb_fcport_event(void *cbarg, bfa_boolean_t complete)
 {
@@ -2839,7 +2754,7 @@ bfa_fcport_scn(struct bfa_fcport_s *fcport, enum bfa_port_linkstate event,
 		bfa_sm_send_event(&fcport->ln, BFA_FCPORT_LN_SM_LINKDOWN);
 		break;
 	default:
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
 
@@ -2906,7 +2821,7 @@ bfa_fcport_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
 	struct bfa_port_cfg_s *port_cfg = &fcport->cfg;
 	struct bfa_fcport_ln_s *ln = &fcport->ln;
-	struct bfa_timeval_s tv;
+	struct timeval tv;
 
 	memset(fcport, 0, sizeof(struct bfa_fcport_s));
 	fcport->bfa = bfa;
@@ -2920,7 +2835,7 @@ bfa_fcport_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 	/*
 	 * initialize time stamp for stats reset
 	 */
-	bfa_os_gettimeofday(&tv);
+	do_gettimeofday(&tv);
 	fcport->stats_reset_time = tv.tv_sec;
 
 	/*
@@ -3039,6 +2954,7 @@ bfa_fcport_send_enable(struct bfa_fcport_s *fcport)
 	m->port_cfg = fcport->cfg;
 	m->msgtag = fcport->msgtag;
 	m->port_cfg.maxfrsize = cpu_to_be16(fcport->cfg.maxfrsize);
+	 m->use_flash_cfg = fcport->use_flash_cfg;
 	bfa_dma_be_addr_set(m->stats_dma_addr, fcport->stats_pa);
 	bfa_trc(fcport->bfa, m->stats_dma_addr.a32.addr_lo);
 	bfa_trc(fcport->bfa, m->stats_dma_addr.a32.addr_hi);
@@ -3089,8 +3005,8 @@ bfa_fcport_send_disable(struct bfa_fcport_s *fcport)
 static void
 bfa_fcport_set_wwns(struct bfa_fcport_s *fcport)
 {
-	fcport->pwwn = bfa_ioc_get_pwwn(&fcport->bfa->ioc);
-	fcport->nwwn = bfa_ioc_get_nwwn(&fcport->bfa->ioc);
+	fcport->pwwn = fcport->bfa->ioc.attr->pwwn;
+	fcport->nwwn = fcport->bfa->ioc.attr->nwwn;
 
 	bfa_trc(fcport->bfa, fcport->pwwn);
 	bfa_trc(fcport->bfa, fcport->nwwn);
@@ -3127,7 +3043,7 @@ bfa_fcport_qos_stats_swap(struct bfa_qos_stats_s *d,
 	struct bfa_qos_stats_s *s)
 {
 	u32	*dip = (u32 *) d;
-	u32	*sip = (u32 *) s;
+	__be32	*sip = (__be32 *) s;
 	int		i;
 
 	/* Now swap the 32 bit fields */
@@ -3140,12 +3056,12 @@ bfa_fcport_fcoe_stats_swap(struct bfa_fcoe_stats_s *d,
 	struct bfa_fcoe_stats_s *s)
 {
 	u32	*dip = (u32 *) d;
-	u32	*sip = (u32 *) s;
+	__be32	*sip = (__be32 *) s;
 	int		i;
 
 	for (i = 0; i < ((sizeof(struct bfa_fcoe_stats_s))/sizeof(u32));
 	     i = i + 2) {
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 		dip[i] = be32_to_cpu(sip[i]);
 		dip[i + 1] = be32_to_cpu(sip[i + 1]);
 #else
@@ -3162,7 +3078,7 @@ __bfa_cb_fcport_stats_get(void *cbarg, bfa_boolean_t complete)
 
 	if (complete) {
 		if (fcport->stats_status == BFA_STATUS_OK) {
-			struct bfa_timeval_s tv;
+			struct timeval tv;
 
 			/* Swap FC QoS or FCoE stats */
 			if (bfa_ioc_get_fcmode(&fcport->bfa->ioc)) {
@@ -3174,7 +3090,7 @@ __bfa_cb_fcport_stats_get(void *cbarg, bfa_boolean_t complete)
 					&fcport->stats_ret->fcoe,
 					&fcport->stats->fcoe);
 
-				bfa_os_gettimeofday(&tv);
+				do_gettimeofday(&tv);
 				fcport->stats_ret->fcoe.secs_reset =
 					tv.tv_sec - fcport->stats_reset_time;
 			}
@@ -3233,12 +3149,12 @@ __bfa_cb_fcport_stats_clr(void *cbarg, bfa_boolean_t complete)
 	struct bfa_fcport_s *fcport = cbarg;
 
 	if (complete) {
-		struct bfa_timeval_s tv;
+		struct timeval tv;
 
 		/*
 		 * re-initialize time stamp for stats reset
 		 */
-		bfa_os_gettimeofday(&tv);
+		do_gettimeofday(&tv);
 		fcport->stats_reset_time = tv.tv_sec;
 
 		fcport->stats_cbfn(fcport->stats_cbarg, fcport->stats_status);
@@ -3303,8 +3219,8 @@ bfa_trunk_scn(struct bfa_fcport_s *fcport, struct bfi_fcport_trunk_scn_s *scn)
 	int link_bm = 0;
 
 	bfa_trc(fcport->bfa, fcport->cfg.trunked);
-	bfa_assert(scn->trunk_state == BFA_TRUNK_ONLINE ||
-		   scn->trunk_state == BFA_TRUNK_OFFLINE);
+	WARN_ON(scn->trunk_state != BFA_TRUNK_ONLINE &&
+		   scn->trunk_state != BFA_TRUNK_OFFLINE);
 
 	bfa_trc(fcport->bfa, trunk->attr.state);
 	bfa_trc(fcport->bfa, scn->trunk_state);
@@ -3396,12 +3312,6 @@ bfa_trunk_iocdisable(struct bfa_s *bfa)
 	}
 }
 
-
-
-/*
- *  hal_port_public
- */
-
 /*
  * Called to initialize port attributes
  */
@@ -3419,9 +3329,9 @@ bfa_fcport_init(struct bfa_s *bfa)
 	fcport->cfg.rx_bbcredit = bfa_ioc_rx_bbcredit(&bfa->ioc);
 	fcport->speed_sup = bfa_ioc_speed_sup(&bfa->ioc);
 
-	bfa_assert(fcport->cfg.maxfrsize);
-	bfa_assert(fcport->cfg.rx_bbcredit);
-	bfa_assert(fcport->speed_sup);
+	WARN_ON(!fcport->cfg.maxfrsize);
+	WARN_ON(!fcport->cfg.rx_bbcredit);
+	WARN_ON(!fcport->speed_sup);
 }
 
 /*
@@ -3441,8 +3351,28 @@ bfa_fcport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
 
 	switch (msg->mhdr.msg_id) {
 	case BFI_FCPORT_I2H_ENABLE_RSP:
-		if (fcport->msgtag == i2hmsg.penable_rsp->msgtag)
+		if (fcport->msgtag == i2hmsg.penable_rsp->msgtag) {
+
+			if (fcport->use_flash_cfg) {
+				fcport->cfg = i2hmsg.penable_rsp->port_cfg;
+				fcport->cfg.maxfrsize =
+					cpu_to_be16(fcport->cfg.maxfrsize);
+				fcport->cfg.path_tov =
+					cpu_to_be16(fcport->cfg.path_tov);
+				fcport->cfg.q_depth =
+					cpu_to_be16(fcport->cfg.q_depth);
+
+				if (fcport->cfg.trunked)
+					fcport->trunk.attr.state =
+						BFA_TRUNK_OFFLINE;
+				else
+					fcport->trunk.attr.state =
+						BFA_TRUNK_DISABLED;
+				fcport->use_flash_cfg = BFA_FALSE;
+			}
+
 			bfa_sm_send_event(fcport, BFA_FCPORT_SM_FWRSP);
+		}
 		break;
 
 	case BFI_FCPORT_I2H_DISABLE_RSP:
@@ -3498,17 +3428,11 @@ bfa_fcport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
 		break;
 
 	default:
-		bfa_assert(0);
+		WARN_ON(1);
 	break;
 	}
 }
 
-
-
-/*
- *  hal_port_api
- */
-
 /*
  * Registered callback for port events.
  */
@@ -3732,8 +3656,8 @@ bfa_fcport_get_attr(struct bfa_s *bfa, struct bfa_port_attr_s *attr)
 	attr->nwwn = fcport->nwwn;
 	attr->pwwn = fcport->pwwn;
 
-	attr->factorypwwn =  bfa_ioc_get_mfg_pwwn(&bfa->ioc);
-	attr->factorynwwn =  bfa_ioc_get_mfg_nwwn(&bfa->ioc);
+	attr->factorypwwn =  bfa->ioc.attr->mfg_pwwn;
+	attr->factorynwwn =  bfa->ioc.attr->mfg_nwwn;
 
 	memcpy(&attr->pport_cfg, &fcport->cfg,
 		sizeof(struct bfa_port_cfg_s));
@@ -3751,7 +3675,7 @@ bfa_fcport_get_attr(struct bfa_s *bfa, struct bfa_port_attr_s *attr)
 	/* beacon attributes */
 	attr->beacon = fcport->beacon;
 	attr->link_e2e_beacon = fcport->link_e2e_beacon;
-	attr->plog_enabled = bfa_plog_get_setting(fcport->bfa->plog);
+	attr->plog_enabled = (bfa_boolean_t)fcport->bfa->plog->plog_enabled;
 	attr->io_profile = bfa_fcpim_get_io_profile(fcport->bfa);
 
 	attr->pport_cfg.path_tov  = bfa_fcpim_path_tov_get(bfa);
@@ -3818,89 +3742,6 @@ bfa_fcport_clear_stats(struct bfa_s *bfa, bfa_cb_port_t cbfn, void *cbarg)
 	return BFA_STATUS_OK;
 }
 
-/*
- * Fetch FCQoS port statistics
- */
-bfa_status_t
-bfa_fcport_get_qos_stats(struct bfa_s *bfa, union bfa_fcport_stats_u *stats,
-	bfa_cb_port_t cbfn, void *cbarg)
-{
-	/* Meaningful only for FC mode */
-	bfa_assert(bfa_ioc_get_fcmode(&bfa->ioc));
-
-	return bfa_fcport_get_stats(bfa, stats, cbfn, cbarg);
-}
-
-/*
- * Reset FCoE port statistics
- */
-bfa_status_t
-bfa_fcport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_port_t cbfn, void *cbarg)
-{
-	/* Meaningful only for FC mode */
-	bfa_assert(bfa_ioc_get_fcmode(&bfa->ioc));
-
-	return bfa_fcport_clear_stats(bfa, cbfn, cbarg);
-}
-
-/*
- * Fetch FCQoS port statistics
- */
-bfa_status_t
-bfa_fcport_get_fcoe_stats(struct bfa_s *bfa, union bfa_fcport_stats_u *stats,
-	bfa_cb_port_t cbfn, void *cbarg)
-{
-	/* Meaningful only for FCoE mode */
-	bfa_assert(!bfa_ioc_get_fcmode(&bfa->ioc));
-
-	return bfa_fcport_get_stats(bfa, stats, cbfn, cbarg);
-}
-
-/*
- * Reset FCoE port statistics
- */
-bfa_status_t
-bfa_fcport_clear_fcoe_stats(struct bfa_s *bfa, bfa_cb_port_t cbfn, void *cbarg)
-{
-	/* Meaningful only for FCoE mode */
-	bfa_assert(!bfa_ioc_get_fcmode(&bfa->ioc));
-
-	return bfa_fcport_clear_stats(bfa, cbfn, cbarg);
-}
-
-void
-bfa_fcport_qos_get_attr(struct bfa_s *bfa, struct bfa_qos_attr_s *qos_attr)
-{
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-
-	qos_attr->state = fcport->qos_attr.state;
-	qos_attr->total_bb_cr = be32_to_cpu(fcport->qos_attr.total_bb_cr);
-}
-
-void
-bfa_fcport_qos_get_vc_attr(struct bfa_s *bfa,
-	struct bfa_qos_vc_attr_s *qos_vc_attr)
-{
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-	struct bfa_qos_vc_attr_s *bfa_vc_attr = &fcport->qos_vc_attr;
-	u32 i = 0;
-
-	qos_vc_attr->total_vc_count = be16_to_cpu(bfa_vc_attr->total_vc_count);
-	qos_vc_attr->shared_credit  = be16_to_cpu(bfa_vc_attr->shared_credit);
-	qos_vc_attr->elp_opmode_flags  =
-			be32_to_cpu(bfa_vc_attr->elp_opmode_flags);
-
-	/* Individual VC info */
-	while (i < qos_vc_attr->total_vc_count) {
-		qos_vc_attr->vc_info[i].vc_credit	=
-				bfa_vc_attr->vc_info[i].vc_credit;
-		qos_vc_attr->vc_info[i].borrow_credit	=
-				bfa_vc_attr->vc_info[i].borrow_credit;
-		qos_vc_attr->vc_info[i].priority	=
-				bfa_vc_attr->vc_info[i].priority;
-		++i;
-	}
-}
 
 /*
  * Fetch port attributes.
@@ -3924,60 +3765,6 @@ bfa_fcport_is_ratelim(struct bfa_s *bfa)
 
 }
 
-void
-bfa_fcport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off)
-{
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-	enum bfa_ioc_type_e ioc_type = bfa_get_type(bfa);
-
-	bfa_trc(bfa, on_off);
-	bfa_trc(bfa, fcport->cfg.qos_enabled);
-
-	bfa_trc(bfa, ioc_type);
-
-	if (ioc_type == BFA_IOC_TYPE_FC) {
-		fcport->cfg.qos_enabled = on_off;
-		/*
-		 * Notify fcpim of the change in QoS state
-		 */
-		bfa_fcpim_update_ioredirect(bfa);
-	}
-}
-
-void
-bfa_fcport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off)
-{
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-
-	bfa_trc(bfa, on_off);
-	bfa_trc(bfa, fcport->cfg.ratelimit);
-
-	fcport->cfg.ratelimit = on_off;
-	if (fcport->cfg.trl_def_speed == BFA_PORT_SPEED_UNKNOWN)
-		fcport->cfg.trl_def_speed = BFA_PORT_SPEED_1GBPS;
-}
-
-/*
- * Configure default minimum ratelim speed
- */
-bfa_status_t
-bfa_fcport_cfg_ratelim_speed(struct bfa_s *bfa, enum bfa_port_speed speed)
-{
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-
-	bfa_trc(bfa, speed);
-
-	/* Auto and speeds greater than the supported speed, are invalid */
-	if ((speed == BFA_PORT_SPEED_AUTO) || (speed > fcport->speed_sup)) {
-		bfa_trc(bfa, fcport->speed_sup);
-		return BFA_STATUS_UNSUPP_SPEED;
-	}
-
-	fcport->cfg.trl_def_speed = speed;
-
-	return BFA_STATUS_OK;
-}
-
 /*
  * Get default minimum ratelim speed
  */
@@ -3990,32 +3777,6 @@ bfa_fcport_get_ratelim_speed(struct bfa_s *bfa)
 	return fcport->cfg.trl_def_speed;
 
 }
-void
-bfa_fcport_busy(struct bfa_s *bfa, bfa_boolean_t status)
-{
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-
-	bfa_trc(bfa, status);
-	bfa_trc(bfa, fcport->diag_busy);
-
-	fcport->diag_busy = status;
-}
-
-void
-bfa_fcport_beacon(void *dev, bfa_boolean_t beacon,
-	bfa_boolean_t link_e2e_beacon)
-{
-	struct bfa_s *bfa = dev;
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-
-	bfa_trc(bfa, beacon);
-	bfa_trc(bfa, link_e2e_beacon);
-	bfa_trc(bfa, fcport->beacon);
-	bfa_trc(bfa, fcport->link_e2e_beacon);
-
-	fcport->beacon = beacon;
-	fcport->link_e2e_beacon = link_e2e_beacon;
-}
 
 bfa_boolean_t
 bfa_fcport_is_linkup(struct bfa_s *bfa)
@@ -4036,63 +3797,6 @@ bfa_fcport_is_qos_enabled(struct bfa_s *bfa)
 	return fcport->cfg.qos_enabled;
 }
 
-bfa_status_t
-bfa_trunk_get_attr(struct bfa_s *bfa, struct bfa_trunk_attr_s *attr)
-
-{
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-	struct bfa_fcport_trunk_s *trunk = &fcport->trunk;
-
-	bfa_trc(bfa, fcport->cfg.trunked);
-	bfa_trc(bfa, trunk->attr.state);
-	*attr = trunk->attr;
-	attr->port_id = bfa_lps_get_base_pid(bfa);
-
-	return BFA_STATUS_OK;
-}
-
-void
-bfa_trunk_enable_cfg(struct bfa_s *bfa)
-{
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-	struct bfa_fcport_trunk_s *trunk = &fcport->trunk;
-
-	bfa_trc(bfa, 1);
-	trunk->attr.state = BFA_TRUNK_OFFLINE;
-	fcport->cfg.trunked = BFA_TRUE;
-}
-
-bfa_status_t
-bfa_trunk_enable(struct bfa_s *bfa)
-{
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-	struct bfa_fcport_trunk_s *trunk = &fcport->trunk;
-
-	bfa_trc(bfa, 1);
-
-	trunk->attr.state   = BFA_TRUNK_OFFLINE;
-	bfa_fcport_disable(bfa);
-	fcport->cfg.trunked = BFA_TRUE;
-	bfa_fcport_enable(bfa);
-
-	return BFA_STATUS_OK;
-}
-
-bfa_status_t
-bfa_trunk_disable(struct bfa_s *bfa)
-{
-	struct bfa_fcport_s *fcport = BFA_FCPORT_MOD(bfa);
-	struct bfa_fcport_trunk_s *trunk = &fcport->trunk;
-
-	bfa_trc(bfa, 0);
-	trunk->attr.state   = BFA_TRUNK_DISABLED;
-	bfa_fcport_disable(bfa);
-	fcport->cfg.trunked = BFA_FALSE;
-	bfa_fcport_enable(bfa);
-	return BFA_STATUS_OK;
-}
-
-
 /*
  * Rport State machine functions
  */
@@ -4606,8 +4310,8 @@ bfa_rport_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 	mod->rps_list = rp;
 	mod->num_rports = cfg->fwcfg.num_rports;
 
-	bfa_assert(mod->num_rports &&
-		   !(mod->num_rports & (mod->num_rports - 1)));
+	WARN_ON(!mod->num_rports ||
+		   (mod->num_rports & (mod->num_rports - 1)));
 
 	for (i = 0; i < mod->num_rports; i++, rp++) {
 		memset(rp, 0, sizeof(struct bfa_rport_s));
@@ -4675,7 +4379,7 @@ bfa_rport_free(struct bfa_rport_s *rport)
 {
 	struct bfa_rport_mod_s *mod = BFA_RPORT_MOD(rport->bfa);
 
-	bfa_assert(bfa_q_is_on_q(&mod->rp_active_q, rport));
+	WARN_ON(!bfa_q_is_on_q(&mod->rp_active_q, rport));
 	list_del(&rport->qe);
 	list_add_tail(&rport->qe, &mod->rp_free_q);
 }
@@ -4788,13 +4492,13 @@ bfa_rport_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 		rp = BFA_RPORT_FROM_TAG(bfa, msg.create_rsp->bfa_handle);
 		rp->fw_handle = msg.create_rsp->fw_handle;
 		rp->qos_attr = msg.create_rsp->qos_attr;
-		bfa_assert(msg.create_rsp->status == BFA_STATUS_OK);
+		WARN_ON(msg.create_rsp->status != BFA_STATUS_OK);
 		bfa_sm_send_event(rp, BFA_RPORT_SM_FWRSP);
 		break;
 
 	case BFI_RPORT_I2H_DELETE_RSP:
 		rp = BFA_RPORT_FROM_TAG(bfa, msg.delete_rsp->bfa_handle);
-		bfa_assert(msg.delete_rsp->status == BFA_STATUS_OK);
+		WARN_ON(msg.delete_rsp->status != BFA_STATUS_OK);
 		bfa_sm_send_event(rp, BFA_RPORT_SM_FWRSP);
 		break;
 
@@ -4806,7 +4510,7 @@ bfa_rport_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
 
 	default:
 		bfa_trc(bfa, m->mhdr.msg_id);
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
 
@@ -4828,24 +4532,18 @@ bfa_rport_create(struct bfa_s *bfa, void *rport_drv)
 
 	rp->bfa = bfa;
 	rp->rport_drv = rport_drv;
-	bfa_rport_clear_stats(rp);
+	memset(&rp->stats, 0, sizeof(rp->stats));
 
-	bfa_assert(bfa_sm_cmp_state(rp, bfa_rport_sm_uninit));
+	WARN_ON(!bfa_sm_cmp_state(rp, bfa_rport_sm_uninit));
 	bfa_sm_send_event(rp, BFA_RPORT_SM_CREATE);
 
 	return rp;
 }
 
 void
-bfa_rport_delete(struct bfa_rport_s *rport)
-{
-	bfa_sm_send_event(rport, BFA_RPORT_SM_DELETE);
-}
-
-void
 bfa_rport_online(struct bfa_rport_s *rport, struct bfa_rport_info_s *rport_info)
 {
-	bfa_assert(rport_info->max_frmsz != 0);
+	WARN_ON(rport_info->max_frmsz == 0);
 
 	/*
 	 * Some JBODs are seen to be not setting PDU size correctly in PLOGI
@@ -4861,43 +4559,15 @@ bfa_rport_online(struct bfa_rport_s *rport, struct bfa_rport_info_s *rport_info)
 }
 
 void
-bfa_rport_offline(struct bfa_rport_s *rport)
-{
-	bfa_sm_send_event(rport, BFA_RPORT_SM_OFFLINE);
-}
-
-void
 bfa_rport_speed(struct bfa_rport_s *rport, enum bfa_port_speed speed)
 {
-	bfa_assert(speed != 0);
-	bfa_assert(speed != BFA_PORT_SPEED_AUTO);
+	WARN_ON(speed == 0);
+	WARN_ON(speed == BFA_PORT_SPEED_AUTO);
 
 	rport->rport_info.speed = speed;
 	bfa_sm_send_event(rport, BFA_RPORT_SM_SET_SPEED);
 }
 
-void
-bfa_rport_get_stats(struct bfa_rport_s *rport,
-	struct bfa_rport_hal_stats_s *stats)
-{
-	*stats = rport->stats;
-}
-
-void
-bfa_rport_get_qos_attr(struct bfa_rport_s *rport,
-					struct bfa_rport_qos_attr_s *qos_attr)
-{
-	qos_attr->qos_priority  = rport->qos_attr.qos_priority;
-	qos_attr->qos_flow_id  = be32_to_cpu(rport->qos_attr.qos_flow_id);
-
-}
-
-void
-bfa_rport_clear_stats(struct bfa_rport_s *rport)
-{
-	memset(&rport->stats, 0, sizeof(rport->stats));
-}
-
 
 /*
  * SGPG related functions
@@ -4952,7 +4622,7 @@ bfa_sgpg_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
 	sgpg_pa.pa = mod->sgpg_arr_pa;
 	mod->free_sgpgs = mod->num_sgpgs;
 
-	bfa_assert(!(sgpg_pa.pa & (sizeof(struct bfi_sgpg_s) - 1)));
+	WARN_ON(sgpg_pa.pa & (sizeof(struct bfi_sgpg_s) - 1));
 
 	for (i = 0; i < mod->num_sgpgs; i++) {
 		memset(hsgpg, 0, sizeof(*hsgpg));
@@ -4993,12 +4663,6 @@ bfa_sgpg_iocdisable(struct bfa_s *bfa)
 {
 }
 
-
-
-/*
- *  hal_sgpg_public BFA SGPG public functions
- */
-
 bfa_status_t
 bfa_sgpg_malloc(struct bfa_s *bfa, struct list_head *sgpg_q, int nsgpgs)
 {
@@ -5006,14 +4670,12 @@ bfa_sgpg_malloc(struct bfa_s *bfa, struct list_head *sgpg_q, int nsgpgs)
 	struct bfa_sgpg_s *hsgpg;
 	int i;
 
-	bfa_trc_fp(bfa, nsgpgs);
-
 	if (mod->free_sgpgs < nsgpgs)
 		return BFA_STATUS_ENOMEM;
 
 	for (i = 0; i < nsgpgs; i++) {
 		bfa_q_deq(&mod->sgpg_q, &hsgpg);
-		bfa_assert(hsgpg);
+		WARN_ON(!hsgpg);
 		list_add_tail(&hsgpg->qe, sgpg_q);
 	}
 
@@ -5027,10 +4689,8 @@ bfa_sgpg_mfree(struct bfa_s *bfa, struct list_head *sgpg_q, int nsgpg)
 	struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
 	struct bfa_sgpg_wqe_s *wqe;
 
-	bfa_trc_fp(bfa, nsgpg);
-
 	mod->free_sgpgs += nsgpg;
-	bfa_assert(mod->free_sgpgs <= mod->num_sgpgs);
+	WARN_ON(mod->free_sgpgs > mod->num_sgpgs);
 
 	list_splice_tail_init(sgpg_q, &mod->sgpg_q);
 
@@ -5060,8 +4720,8 @@ bfa_sgpg_wait(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe, int nsgpg)
 {
 	struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
 
-	bfa_assert(nsgpg > 0);
-	bfa_assert(nsgpg > mod->free_sgpgs);
+	WARN_ON(nsgpg <= 0);
+	WARN_ON(nsgpg <= mod->free_sgpgs);
 
 	wqe->nsgpg_total = wqe->nsgpg = nsgpg;
 
@@ -5072,7 +4732,7 @@ bfa_sgpg_wait(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe, int nsgpg)
 		/*
 		 * no one else is waiting for SGPG
 		 */
-		bfa_assert(list_empty(&mod->sgpg_wait_q));
+		WARN_ON(!list_empty(&mod->sgpg_wait_q));
 		list_splice_tail_init(&mod->sgpg_q, &wqe->sgpg_q);
 		wqe->nsgpg -= mod->free_sgpgs;
 		mod->free_sgpgs = 0;
@@ -5086,7 +4746,7 @@ bfa_sgpg_wcancel(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe)
 {
 	struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
 
-	bfa_assert(bfa_q_is_on_q(&mod->sgpg_wait_q, wqe));
+	WARN_ON(!bfa_q_is_on_q(&mod->sgpg_wait_q, wqe));
 	list_del(&wqe->qe);
 
 	if (wqe->nsgpg_total != wqe->nsgpg)
@@ -5318,7 +4978,7 @@ uf_recv(struct bfa_s *bfa, struct bfi_uf_frm_rcvd_s *m)
 	uf->data_ptr = buf;
 	uf->data_len = m->xfr_len;
 
-	bfa_assert(uf->data_len >= sizeof(struct fchs_s));
+	WARN_ON(uf->data_len < sizeof(struct fchs_s));
 
 	if (uf->data_len == sizeof(struct fchs_s)) {
 		bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_UF, BFA_PL_EID_RX,
@@ -5361,12 +5021,6 @@ bfa_uf_start(struct bfa_s *bfa)
 	bfa_uf_post_all(BFA_UF_MOD(bfa));
 }
 
-
-
-/*
- *  hal_uf_api
- */
-
 /*
  * Register handler for all unsolicted recieve frames.
  *
@@ -5414,7 +5068,7 @@ bfa_uf_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
 
 	default:
 		bfa_trc(bfa, msg->mhdr.msg_id);
-		bfa_assert(0);
+		WARN_ON(1);
 	}
 }
 
diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h
index e2349d5cdb9..331ad992a58 100644
--- a/drivers/scsi/bfa/bfa_svc.h
+++ b/drivers/scsi/bfa/bfa_svc.h
@@ -220,6 +220,18 @@ void	bfa_fcxp_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
 /*
  * RPORT related defines
  */
+enum bfa_rport_event {
+	BFA_RPORT_SM_CREATE	= 1,	/*  rport create event          */
+	BFA_RPORT_SM_DELETE	= 2,	/*  deleting an existing rport  */
+	BFA_RPORT_SM_ONLINE	= 3,	/*  rport is online             */
+	BFA_RPORT_SM_OFFLINE	= 4,	/*  rport is offline            */
+	BFA_RPORT_SM_FWRSP	= 5,	/*  firmware response           */
+	BFA_RPORT_SM_HWFAIL	= 6,	/*  IOC h/w failure             */
+	BFA_RPORT_SM_QOS_SCN	= 7,	/*  QoS SCN from firmware       */
+	BFA_RPORT_SM_SET_SPEED	= 8,	/*  Set Rport Speed             */
+	BFA_RPORT_SM_QRESUME	= 9,	/*  space in requeue queue      */
+};
+
 #define BFA_RPORT_MIN	4
 
 struct bfa_rport_mod_s {
@@ -432,6 +444,7 @@ struct bfa_fcport_s {
 	u8			myalpa;	/*  my ALPA in LOOP topology */
 	u8			rsvd[3];
 	struct bfa_port_cfg_s	cfg;	/*  current port configuration */
+	bfa_boolean_t		use_flash_cfg; /* get port cfg from flash */
 	struct bfa_qos_attr_s  qos_attr;   /* QoS Attributes */
 	struct bfa_qos_vc_attr_s qos_vc_attr;  /*  VC info from ELP */
 	struct bfa_reqq_wait_s	reqq_wait;
@@ -500,30 +513,9 @@ void bfa_fcport_event_register(struct bfa_s *bfa,
 			void (*event_cbfn) (void *cbarg,
 			enum bfa_port_linkstate event), void *event_cbarg);
 bfa_boolean_t bfa_fcport_is_disabled(struct bfa_s *bfa);
-void bfa_fcport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off);
-void bfa_fcport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off);
-bfa_status_t bfa_fcport_cfg_ratelim_speed(struct bfa_s *bfa,
-					  enum bfa_port_speed speed);
 enum bfa_port_speed bfa_fcport_get_ratelim_speed(struct bfa_s *bfa);
 
 void bfa_fcport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit);
-void bfa_fcport_busy(struct bfa_s *bfa, bfa_boolean_t status);
-void bfa_fcport_beacon(void *dev, bfa_boolean_t beacon,
-		       bfa_boolean_t link_e2e_beacon);
-void bfa_fcport_qos_get_attr(struct bfa_s *bfa,
-			     struct bfa_qos_attr_s *qos_attr);
-void bfa_fcport_qos_get_vc_attr(struct bfa_s *bfa,
-				struct bfa_qos_vc_attr_s *qos_vc_attr);
-bfa_status_t bfa_fcport_get_qos_stats(struct bfa_s *bfa,
-				      union bfa_fcport_stats_u *stats,
-				      bfa_cb_port_t cbfn, void *cbarg);
-bfa_status_t bfa_fcport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_port_t cbfn,
-					void *cbarg);
-bfa_status_t bfa_fcport_get_fcoe_stats(struct bfa_s *bfa,
-				       union bfa_fcport_stats_u *stats,
-				       bfa_cb_port_t cbfn, void *cbarg);
-bfa_status_t bfa_fcport_clear_fcoe_stats(struct bfa_s *bfa, bfa_cb_port_t cbfn,
-					 void *cbarg);
 bfa_boolean_t     bfa_fcport_is_ratelim(struct bfa_s *bfa);
 bfa_boolean_t	bfa_fcport_is_linkup(struct bfa_s *bfa);
 bfa_status_t bfa_fcport_get_stats(struct bfa_s *bfa,
@@ -537,14 +529,9 @@ bfa_boolean_t bfa_fcport_is_qos_enabled(struct bfa_s *bfa);
  * bfa rport API functions
  */
 struct bfa_rport_s *bfa_rport_create(struct bfa_s *bfa, void *rport_drv);
-void bfa_rport_delete(struct bfa_rport_s *rport);
 void bfa_rport_online(struct bfa_rport_s *rport,
 		      struct bfa_rport_info_s *rport_info);
-void bfa_rport_offline(struct bfa_rport_s *rport);
 void bfa_rport_speed(struct bfa_rport_s *rport, enum bfa_port_speed speed);
-void bfa_rport_get_stats(struct bfa_rport_s *rport,
-			 struct bfa_rport_hal_stats_s *stats);
-void bfa_rport_clear_stats(struct bfa_rport_s *rport);
 void bfa_cb_rport_online(void *rport);
 void bfa_cb_rport_offline(void *rport);
 void bfa_cb_rport_qos_scn_flowid(void *rport,
@@ -553,8 +540,6 @@ void bfa_cb_rport_qos_scn_flowid(void *rport,
 void bfa_cb_rport_qos_scn_prio(void *rport,
 			       struct bfa_rport_qos_attr_s old_qos_attr,
 			       struct bfa_rport_qos_attr_s new_qos_attr);
-void bfa_rport_get_qos_attr(struct bfa_rport_s *rport,
-			    struct bfa_rport_qos_attr_s *qos_attr);
 
 /*
  * bfa fcxp API functions
@@ -619,38 +604,18 @@ void bfa_uf_free(struct bfa_uf_s *uf);
 u32 bfa_lps_get_max_vport(struct bfa_s *bfa);
 struct bfa_lps_s *bfa_lps_alloc(struct bfa_s *bfa);
 void bfa_lps_delete(struct bfa_lps_s *lps);
-void bfa_lps_discard(struct bfa_lps_s *lps);
 void bfa_lps_flogi(struct bfa_lps_s *lps, void *uarg, u8 alpa,
 		   u16 pdusz, wwn_t pwwn, wwn_t nwwn,
 		   bfa_boolean_t auth_en);
 void bfa_lps_fdisc(struct bfa_lps_s *lps, void *uarg, u16 pdusz,
 		   wwn_t pwwn, wwn_t nwwn);
-void bfa_lps_flogo(struct bfa_lps_s *lps);
 void bfa_lps_fdisclogo(struct bfa_lps_s *lps);
-u8 bfa_lps_get_tag(struct bfa_lps_s *lps);
-bfa_boolean_t bfa_lps_is_npiv_en(struct bfa_lps_s *lps);
-bfa_boolean_t bfa_lps_is_fport(struct bfa_lps_s *lps);
-bfa_boolean_t bfa_lps_is_brcd_fabric(struct bfa_lps_s *lps);
-bfa_boolean_t bfa_lps_is_authreq(struct bfa_lps_s *lps);
-bfa_eproto_status_t bfa_lps_get_extstatus(struct bfa_lps_s *lps);
-u32 bfa_lps_get_pid(struct bfa_lps_s *lps);
+void bfa_lps_set_n2n_pid(struct bfa_lps_s *lps, u32 n2n_pid);
 u32 bfa_lps_get_base_pid(struct bfa_s *bfa);
 u8 bfa_lps_get_tag_from_pid(struct bfa_s *bfa, u32 pid);
-u16 bfa_lps_get_peer_bbcredit(struct bfa_lps_s *lps);
-wwn_t bfa_lps_get_peer_pwwn(struct bfa_lps_s *lps);
-wwn_t bfa_lps_get_peer_nwwn(struct bfa_lps_s *lps);
-u8 bfa_lps_get_lsrjt_rsn(struct bfa_lps_s *lps);
-u8 bfa_lps_get_lsrjt_expl(struct bfa_lps_s *lps);
-mac_t bfa_lps_get_lp_mac(struct bfa_lps_s *lps);
 void bfa_cb_lps_flogi_comp(void *bfad, void *uarg, bfa_status_t status);
 void bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status);
 void bfa_cb_lps_fdisclogo_comp(void *bfad, void *uarg);
 void bfa_cb_lps_cvl_event(void *bfad, void *uarg);
 
-void bfa_trunk_enable_cfg(struct bfa_s *bfa);
-bfa_status_t bfa_trunk_enable(struct bfa_s *bfa);
-bfa_status_t bfa_trunk_disable(struct bfa_s *bfa);
-bfa_status_t bfa_trunk_get_attr(struct bfa_s *bfa,
-		struct bfa_trunk_attr_s *attr);
-
 #endif /* __BFA_SVC_H__ */
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 1f938974b84..44524cf55d3 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -32,7 +32,6 @@
 #include "bfad_drv.h"
 #include "bfad_im.h"
 #include "bfa_fcs.h"
-#include "bfa_os_inc.h"
 #include "bfa_defs.h"
 #include "bfa.h"
 
@@ -50,7 +49,7 @@ int		reqq_size, rspq_size, num_sgpgs;
 int		rport_del_timeout = BFA_FCS_RPORT_DEF_DEL_TIMEOUT;
 int		bfa_lun_queue_depth = BFAD_LUN_QUEUE_DEPTH;
 int		bfa_io_max_sge = BFAD_IO_MAX_SGE;
-int		log_level = 3; /* WARNING log level */
+int		bfa_log_level = 3; /* WARNING log level */
 int		ioc_auto_recover = BFA_TRUE;
 int		bfa_linkup_delay = -1;
 int		fdmi_enable = BFA_TRUE;
@@ -61,12 +60,12 @@ int		msix_disable_cb = 0, msix_disable_ct = 0;
 u32	bfi_image_ct_fc_size, bfi_image_ct_cna_size, bfi_image_cb_fc_size;
 u32     *bfi_image_ct_fc, *bfi_image_ct_cna, *bfi_image_cb_fc;
 
-const char *msix_name_ct[] = {
+static const char *msix_name_ct[] = {
 	"cpe0", "cpe1", "cpe2", "cpe3",
 	"rme0", "rme1", "rme2", "rme3",
 	"ctrl" };
 
-const char *msix_name_cb[] = {
+static const char *msix_name_cb[] = {
 	"cpe0", "cpe1", "cpe2", "cpe3",
 	"rme0", "rme1", "rme2", "rme3",
 	"eemc", "elpu0", "elpu1", "epss", "mlpu" };
@@ -108,8 +107,8 @@ module_param(bfa_lun_queue_depth, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(bfa_lun_queue_depth, "Lun queue depth, default=32, Range[>0]");
 module_param(bfa_io_max_sge, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(bfa_io_max_sge, "Max io scatter/gather elements, default=255");
-module_param(log_level, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(log_level, "Driver log level, default=3, "
+module_param(bfa_log_level, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(bfa_log_level, "Driver log level, default=3, "
 				"Range[Critical:1|Error:2|Warning:3|Info:4]");
 module_param(ioc_auto_recover, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(ioc_auto_recover, "IOC auto recovery, default=1, "
@@ -206,7 +205,7 @@ bfad_sm_created(struct bfad_s *bfad, enum bfad_sm_event event)
 		}
 
 		spin_lock_irqsave(&bfad->bfad_lock, flags);
-		bfa_init(&bfad->bfa);
+		bfa_iocfc_init(&bfad->bfa);
 		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
 		/* Set up interrupt handler for each vectors */
@@ -533,7 +532,7 @@ bfad_hal_mem_release(struct bfad_s *bfad)
 					(dma_addr_t) meminfo_elem->dma);
 				break;
 			default:
-				bfa_assert(0);
+				WARN_ON(1);
 				break;
 			}
 		}
@@ -725,7 +724,7 @@ bfad_bfa_tmo(unsigned long data)
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 
-	bfa_timer_tick(&bfad->bfa);
+	bfa_timer_beat(&bfad->bfa.timer_mod);
 
 	bfa_comp_deq(&bfad->bfa, &doneq);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
@@ -882,8 +881,8 @@ bfad_drv_init(struct bfad_s *bfad)
 		goto out_hal_mem_alloc_failure;
 	}
 
-	bfa_init_trc(&bfad->bfa, bfad->trcmod);
-	bfa_init_plog(&bfad->bfa, &bfad->plog_buf);
+	bfad->bfa.trcmod = bfad->trcmod;
+	bfad->bfa.plog = &bfad->plog_buf;
 	bfa_plog_init(&bfad->plog_buf);
 	bfa_plog_str(&bfad->plog_buf, BFA_PL_MID_DRVR, BFA_PL_EID_DRIVER_START,
 		     0, "Driver Attach");
@@ -893,9 +892,9 @@ bfad_drv_init(struct bfad_s *bfad)
 
 	/* FCS INIT */
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
-	bfa_fcs_trc_init(&bfad->bfa_fcs, bfad->trcmod);
+	bfad->bfa_fcs.trcmod = bfad->trcmod;
 	bfa_fcs_attach(&bfad->bfa_fcs, &bfad->bfa, bfad, BFA_FALSE);
-	bfa_fcs_set_fdmi_param(&bfad->bfa_fcs, fdmi_enable);
+	bfad->bfa_fcs.fdmi_enabled = fdmi_enable;
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
 	bfad->bfad_flags |= BFAD_DRV_INIT_DONE;
@@ -913,7 +912,7 @@ bfad_drv_uninit(struct bfad_s *bfad)
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	init_completion(&bfad->comp);
-	bfa_stop(&bfad->bfa);
+	bfa_iocfc_stop(&bfad->bfa);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 	wait_for_completion(&bfad->comp);
 
@@ -932,8 +931,8 @@ bfad_drv_start(struct bfad_s *bfad)
 	unsigned long	flags;
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
-	bfa_start(&bfad->bfa);
-	bfa_fcs_start(&bfad->bfa_fcs);
+	bfa_iocfc_start(&bfad->bfa);
+	bfa_fcs_fabric_modstart(&bfad->bfa_fcs);
 	bfad->bfad_flags |= BFAD_HAL_START_DONE;
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
@@ -963,7 +962,7 @@ bfad_stop(struct bfad_s *bfad)
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	init_completion(&bfad->comp);
-	bfa_stop(&bfad->bfa);
+	bfa_iocfc_stop(&bfad->bfa);
 	bfad->bfad_flags &= ~BFAD_HAL_START_DONE;
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 	wait_for_completion(&bfad->comp);
@@ -1102,17 +1101,17 @@ bfad_start_ops(struct bfad_s *bfad) {
 
 	/*
 	 * If bfa_linkup_delay is set to -1 default; try to retrive the
-	 * value using the bfad_os_get_linkup_delay(); else use the
+	 * value using the bfad_get_linkup_delay(); else use the
 	 * passed in module param value as the bfa_linkup_delay.
 	 */
 	if (bfa_linkup_delay < 0) {
-		bfa_linkup_delay = bfad_os_get_linkup_delay(bfad);
-		bfad_os_rport_online_wait(bfad);
+		bfa_linkup_delay = bfad_get_linkup_delay(bfad);
+		bfad_rport_online_wait(bfad);
 		bfa_linkup_delay = -1;
 	} else
-		bfad_os_rport_online_wait(bfad);
+		bfad_rport_online_wait(bfad);
 
-	BFA_LOG(KERN_INFO, bfad, log_level, "bfa device claimed\n");
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level, "bfa device claimed\n");
 
 	return BFA_STATUS_OK;
 }
@@ -1167,7 +1166,6 @@ bfad_intx(int irq, void *dev_id)
 		spin_lock_irqsave(&bfad->bfad_lock, flags);
 		bfa_comp_free(&bfad->bfa, &doneq);
 		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
-		bfa_trc_fp(bfad, irq);
 	}
 
 	return IRQ_HANDLED;
@@ -1524,7 +1522,7 @@ bfad_init(void)
 	if (strcmp(FCPI_NAME, " fcpim") == 0)
 		supported_fc4s |= BFA_LPORT_ROLE_FCP_IM;
 
-	bfa_ioc_auto_recover(ioc_auto_recover);
+	bfa_auto_recover = ioc_auto_recover;
 	bfa_fcs_rport_set_del_timeout(rport_del_timeout);
 
 	error = pci_register_driver(&bfad_pci_driver);
diff --git a/drivers/scsi/bfa/bfad_attr.c b/drivers/scsi/bfa/bfad_attr.c
index ed9fff440b5..a94ea423543 100644
--- a/drivers/scsi/bfa/bfad_attr.c
+++ b/drivers/scsi/bfa/bfad_attr.c
@@ -25,7 +25,7 @@
 /*
  * FC transport template entry, get SCSI target port ID.
  */
-void
+static void
 bfad_im_get_starget_port_id(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost;
@@ -40,7 +40,7 @@ bfad_im_get_starget_port_id(struct scsi_target *starget)
 	bfad = im_port->bfad;
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 
-	itnim = bfad_os_get_itnim(im_port, starget->id);
+	itnim = bfad_get_itnim(im_port, starget->id);
 	if (itnim)
 		fc_id = bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim);
 
@@ -51,7 +51,7 @@ bfad_im_get_starget_port_id(struct scsi_target *starget)
 /*
  * FC transport template entry, get SCSI target nwwn.
  */
-void
+static void
 bfad_im_get_starget_node_name(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost;
@@ -66,7 +66,7 @@ bfad_im_get_starget_node_name(struct scsi_target *starget)
 	bfad = im_port->bfad;
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 
-	itnim = bfad_os_get_itnim(im_port, starget->id);
+	itnim = bfad_get_itnim(im_port, starget->id);
 	if (itnim)
 		node_name = bfa_fcs_itnim_get_nwwn(&itnim->fcs_itnim);
 
@@ -77,7 +77,7 @@ bfad_im_get_starget_node_name(struct scsi_target *starget)
 /*
  * FC transport template entry, get SCSI target pwwn.
  */
-void
+static void
 bfad_im_get_starget_port_name(struct scsi_target *starget)
 {
 	struct Scsi_Host *shost;
@@ -92,7 +92,7 @@ bfad_im_get_starget_port_name(struct scsi_target *starget)
 	bfad = im_port->bfad;
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 
-	itnim = bfad_os_get_itnim(im_port, starget->id);
+	itnim = bfad_get_itnim(im_port, starget->id);
 	if (itnim)
 		port_name = bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim);
 
@@ -103,7 +103,7 @@ bfad_im_get_starget_port_name(struct scsi_target *starget)
 /*
  * FC transport template entry, get SCSI host port ID.
  */
-void
+static void
 bfad_im_get_host_port_id(struct Scsi_Host *shost)
 {
 	struct bfad_im_port_s *im_port =
@@ -111,7 +111,7 @@ bfad_im_get_host_port_id(struct Scsi_Host *shost)
 	struct bfad_port_s    *port = im_port->port;
 
 	fc_host_port_id(shost) =
-			bfa_os_hton3b(bfa_fcs_lport_get_fcid(port->fcs_port));
+			bfa_hton3b(bfa_fcs_lport_get_fcid(port->fcs_port));
 }
 
 /*
@@ -487,7 +487,7 @@ bfad_im_vport_delete(struct fc_vport *fc_vport)
 	wait_for_completion(vport->comp_del);
 
 free_scsi_host:
-	bfad_os_scsi_host_free(bfad, im_port);
+	bfad_scsi_host_free(bfad, im_port);
 
 	kfree(vport);
 
diff --git a/drivers/scsi/bfa/bfad_debugfs.c b/drivers/scsi/bfa/bfad_debugfs.c
index 1fedeeb4ac1..c66e32eced7 100644
--- a/drivers/scsi/bfa/bfad_debugfs.c
+++ b/drivers/scsi/bfa/bfad_debugfs.c
@@ -90,7 +90,7 @@ bfad_debugfs_open_fwtrc(struct inode *inode, struct file *file)
 	memset(fw_debug->debug_buffer, 0, fw_debug->buffer_len);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
-	rc = bfa_debug_fwtrc(&bfad->bfa,
+	rc = bfa_ioc_debug_fwtrc(&bfad->bfa.ioc,
 			fw_debug->debug_buffer,
 			&fw_debug->buffer_len);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
@@ -134,7 +134,7 @@ bfad_debugfs_open_fwsave(struct inode *inode, struct file *file)
 	memset(fw_debug->debug_buffer, 0, fw_debug->buffer_len);
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
-	rc = bfa_debug_fwsave(&bfad->bfa,
+	rc = bfa_ioc_debug_fwsave(&bfad->bfa.ioc,
 			fw_debug->debug_buffer,
 			&fw_debug->buffer_len);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
@@ -208,7 +208,7 @@ bfad_debugfs_read(struct file *file, char __user *buf,
 	if (!debug || !debug->debug_buffer)
 		return 0;
 
-	return memory_read_from_buffer(buf, nbytes, pos,
+	return simple_read_from_buffer(buf, nbytes, pos,
 				debug->debug_buffer, debug->buffer_len);
 }
 
@@ -254,7 +254,7 @@ bfad_debugfs_read_regrd(struct file *file, char __user *buf,
 	if (!bfad->regdata)
 		return 0;
 
-	rc = memory_read_from_buffer(buf, nbytes, pos,
+	rc = simple_read_from_buffer(buf, nbytes, pos,
 			bfad->regdata, bfad->reglen);
 
 	if ((*pos + nbytes) >= bfad->reglen) {
@@ -279,15 +279,31 @@ bfad_debugfs_write_regrd(struct file *file, const char __user *buf,
 	u32 *regbuf;
 	void __iomem *rb, *reg_addr;
 	unsigned long flags;
+	void *kern_buf;
 
-	rc = sscanf(buf, "%x:%x", &addr, &len);
+	kern_buf = kzalloc(nbytes, GFP_KERNEL);
+
+	if (!kern_buf) {
+		printk(KERN_INFO "bfad[%d]: Failed to allocate buffer\n",
+				bfad->inst_no);
+		return -ENOMEM;
+	}
+
+	if (copy_from_user(kern_buf, (void  __user *)buf, nbytes)) {
+		kfree(kern_buf);
+		return -ENOMEM;
+	}
+
+	rc = sscanf(kern_buf, "%x:%x", &addr, &len);
 	if (rc < 2) {
 		printk(KERN_INFO
 			"bfad[%d]: %s failed to read user buf\n",
 			bfad->inst_no, __func__);
+		kfree(kern_buf);
 		return -EINVAL;
 	}
 
+	kfree(kern_buf);
 	kfree(bfad->regdata);
 	bfad->regdata = NULL;
 	bfad->reglen = 0;
@@ -339,14 +355,30 @@ bfad_debugfs_write_regwr(struct file *file, const char __user *buf,
 	int addr, val, rc;
 	void __iomem *reg_addr;
 	unsigned long flags;
+	void *kern_buf;
+
+	kern_buf = kzalloc(nbytes, GFP_KERNEL);
+
+	if (!kern_buf) {
+		printk(KERN_INFO "bfad[%d]: Failed to allocate buffer\n",
+				bfad->inst_no);
+		return -ENOMEM;
+	}
+
+	if (copy_from_user(kern_buf, (void  __user *)buf, nbytes)) {
+		kfree(kern_buf);
+		return -ENOMEM;
+	}
 
-	rc = sscanf(buf, "%x:%x", &addr, &val);
+	rc = sscanf(kern_buf, "%x:%x", &addr, &val);
 	if (rc < 2) {
 		printk(KERN_INFO
 			"bfad[%d]: %s failed to read user buf\n",
 			bfad->inst_no, __func__);
+		kfree(kern_buf);
 		return -EINVAL;
 	}
+	kfree(kern_buf);
 
 	addr &= BFA_REG_ADDRMSK(bfa); /* offset only 17 bit and word align */
 
@@ -359,7 +391,7 @@ bfad_debugfs_write_regwr(struct file *file, const char __user *buf,
 		return -EINVAL;
 	}
 
-	reg_addr = (u32 *) ((u8 *) bfa_ioc_bar0(ioc) + addr);
+	reg_addr = (bfa_ioc_bar0(ioc)) + addr;
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	writel(val, reg_addr);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
diff --git a/drivers/scsi/bfa/bfad_drv.h b/drivers/scsi/bfa/bfad_drv.h
index 97f9b6c0937..7f9ea90254c 100644
--- a/drivers/scsi/bfa/bfad_drv.h
+++ b/drivers/scsi/bfa/bfad_drv.h
@@ -26,7 +26,23 @@
 #ifndef __BFAD_DRV_H__
 #define __BFAD_DRV_H__
 
-#include "bfa_os_inc.h"
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/workqueue.h>
+#include <linux/bitops.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_transport.h>
 
 #include "bfa_modules.h"
 #include "bfa_fcs.h"
@@ -39,7 +55,7 @@
 #ifdef BFA_DRIVER_VERSION
 #define BFAD_DRIVER_VERSION    BFA_DRIVER_VERSION
 #else
-#define BFAD_DRIVER_VERSION    "2.3.2.0"
+#define BFAD_DRIVER_VERSION    "2.3.2.3"
 #endif
 
 #define BFAD_PROTO_NAME FCPI_NAME
@@ -263,28 +279,21 @@ struct bfad_hal_comp {
  */
 #define nextLowerInt(x)                         \
 do {                                            \
-	int i;                                  \
+	int __i;                                  \
 	(*x)--;					\
-	for (i = 1; i < (sizeof(int)*8); i <<= 1) \
-		(*x) = (*x) | (*x) >> i;	\
+	for (__i = 1; __i < (sizeof(int)*8); __i <<= 1) \
+		(*x) = (*x) | (*x) >> __i;	\
 	(*x)++;					\
 	(*x) = (*x) >> 1;			\
 } while (0)
 
 
-#define list_remove_head(list, entry, type, member)		\
-do {								\
-	entry = NULL;                                           \
-	if (!list_empty(list)) {                                \
-		entry = list_entry((list)->next, type, member);	\
-		list_del_init(&entry->member);			\
-	}							\
+#define BFA_LOG(level, bfad, mask, fmt, arg...)				\
+do {									\
+	if (((mask) == 4) || (level[1] <= '4'))				\
+		dev_printk(level, &((bfad)->pcidev)->dev, fmt, ##arg);	\
 } while (0)
 
-#define list_get_first(list, type, member)				\
-((list_empty(list)) ? NULL :						\
-	list_entry((list)->next, type, member))
-
 bfa_status_t	bfad_vport_create(struct bfad_s *bfad, u16 vf_id,
 				  struct bfa_lport_cfg_s *port_cfg,
 				  struct device *dev);
@@ -316,8 +325,8 @@ void		bfad_debugfs_exit(struct bfad_port_s *port);
 
 void bfad_pci_remove(struct pci_dev *pdev);
 int bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid);
-void bfad_os_rport_online_wait(struct bfad_s *bfad);
-int bfad_os_get_linkup_delay(struct bfad_s *bfad);
+void bfad_rport_online_wait(struct bfad_s *bfad);
+int bfad_get_linkup_delay(struct bfad_s *bfad);
 int bfad_install_msix_handler(struct bfad_s *bfad);
 
 extern struct idr bfad_im_port_index;
@@ -337,7 +346,7 @@ extern int	num_sgpgs;
 extern int      rport_del_timeout;
 extern int      bfa_lun_queue_depth;
 extern int      bfa_io_max_sge;
-extern int      log_level;
+extern int      bfa_log_level;
 extern int      ioc_auto_recover;
 extern int      bfa_linkup_delay;
 extern int      msix_disable_cb;
diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c
index 8daa716739d..c2b36179e8e 100644
--- a/drivers/scsi/bfa/bfad_im.c
+++ b/drivers/scsi/bfa/bfad_im.c
@@ -21,7 +21,6 @@
 
 #include "bfad_drv.h"
 #include "bfad_im.h"
-#include "bfa_cb_ioim.h"
 #include "bfa_fcs.h"
 
 BFA_TRC_FILE(LDRV, IM);
@@ -30,8 +29,7 @@ DEFINE_IDR(bfad_im_port_index);
 struct scsi_transport_template *bfad_im_scsi_transport_template;
 struct scsi_transport_template *bfad_im_scsi_vport_transport_template;
 static void bfad_im_itnim_work_handler(struct work_struct *work);
-static int bfad_im_queuecommand(struct scsi_cmnd *cmnd,
-				void (*done)(struct scsi_cmnd *));
+static int bfad_im_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmnd);
 static int bfad_im_slave_alloc(struct scsi_device *sdev);
 static void bfad_im_fc_rport_add(struct bfad_im_port_s  *im_port,
 				struct bfad_itnim_s *itnim);
@@ -94,10 +92,10 @@ bfa_cb_ioim_done(void *drv, struct bfad_ioim_s *dio,
 		if (!cmnd->result && itnim &&
 			 (bfa_lun_queue_depth > cmnd->device->queue_depth)) {
 			/* Queue depth adjustment for good status completion */
-			bfad_os_ramp_up_qdepth(itnim, cmnd->device);
+			bfad_ramp_up_qdepth(itnim, cmnd->device);
 		} else if (cmnd->result == SAM_STAT_TASK_SET_FULL && itnim) {
 			/* qfull handling */
-			bfad_os_handle_qfull(itnim, cmnd->device);
+			bfad_handle_qfull(itnim, cmnd->device);
 		}
 	}
 
@@ -125,7 +123,7 @@ bfa_cb_ioim_good_comp(void *drv, struct bfad_ioim_s *dio)
 		if (itnim_data) {
 			itnim = itnim_data->itnim;
 			if (itnim)
-				bfad_os_ramp_up_qdepth(itnim, cmnd->device);
+				bfad_ramp_up_qdepth(itnim, cmnd->device);
 		}
 	}
 
@@ -184,7 +182,7 @@ bfad_im_info(struct Scsi_Host *shost)
 	bfa_get_adapter_model(bfa, model);
 
 	memset(bfa_buf, 0, sizeof(bfa_buf));
-	if (ioc->ctdev)
+	if (ioc->ctdev && !ioc->fcmode)
 		snprintf(bfa_buf, sizeof(bfa_buf),
 		"Brocade FCOE Adapter, " "model: %s hwpath: %s driver: %s",
 		 model, bfad->pci_name, BFAD_DRIVER_VERSION);
@@ -226,7 +224,8 @@ bfad_im_abort_handler(struct scsi_cmnd *cmnd)
 	}
 
 	bfa_trc(bfad, hal_io->iotag);
-	BFA_LOG(KERN_INFO, bfad, log_level, "scsi%d: abort cmnd %p iotag %x\n",
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level,
+		"scsi%d: abort cmnd %p iotag %x\n",
 		im_port->shost->host_no, cmnd, hal_io->iotag);
 	(void) bfa_ioim_abort(hal_io);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
@@ -242,7 +241,7 @@ bfad_im_abort_handler(struct scsi_cmnd *cmnd)
 
 	cmnd->scsi_done(cmnd);
 	bfa_trc(bfad, hal_io->iotag);
-	BFA_LOG(KERN_INFO, bfad, log_level,
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 		"scsi%d: complete abort 0x%p iotag 0x%x\n",
 		im_port->shost->host_no, cmnd, hal_io->iotag);
 	return SUCCESS;
@@ -258,10 +257,11 @@ bfad_im_target_reset_send(struct bfad_s *bfad, struct scsi_cmnd *cmnd,
 	struct bfa_tskim_s *tskim;
 	struct bfa_itnim_s *bfa_itnim;
 	bfa_status_t    rc = BFA_STATUS_OK;
+	struct scsi_lun scsilun;
 
 	tskim = bfa_tskim_alloc(&bfad->bfa, (struct bfad_tskim_s *) cmnd);
 	if (!tskim) {
-		BFA_LOG(KERN_ERR, bfad, log_level,
+		BFA_LOG(KERN_ERR, bfad, bfa_log_level,
 			"target reset, fail to allocate tskim\n");
 		rc = BFA_STATUS_FAILED;
 		goto out;
@@ -274,7 +274,8 @@ bfad_im_target_reset_send(struct bfad_s *bfad, struct scsi_cmnd *cmnd,
 	cmnd->host_scribble = NULL;
 	cmnd->SCp.Status = 0;
 	bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim);
-	bfa_tskim_start(tskim, bfa_itnim, (lun_t)0,
+	memset(&scsilun, 0, sizeof(scsilun));
+	bfa_tskim_start(tskim, bfa_itnim, scsilun,
 			    FCP_TM_TARGET_RESET, BFAD_TARGET_RESET_TMO);
 out:
 	return rc;
@@ -301,6 +302,7 @@ bfad_im_reset_lun_handler(struct scsi_cmnd *cmnd)
 	int             rc = SUCCESS;
 	unsigned long   flags;
 	enum bfi_tskim_status task_status;
+	struct scsi_lun scsilun;
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	itnim = itnim_data->itnim;
@@ -312,7 +314,7 @@ bfad_im_reset_lun_handler(struct scsi_cmnd *cmnd)
 
 	tskim = bfa_tskim_alloc(&bfad->bfa, (struct bfad_tskim_s *) cmnd);
 	if (!tskim) {
-		BFA_LOG(KERN_ERR, bfad, log_level,
+		BFA_LOG(KERN_ERR, bfad, bfa_log_level,
 				"LUN reset, fail to allocate tskim");
 		spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 		rc = FAILED;
@@ -327,8 +329,8 @@ bfad_im_reset_lun_handler(struct scsi_cmnd *cmnd)
 	cmnd->SCp.ptr = (char *)&wq;
 	cmnd->SCp.Status = 0;
 	bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim);
-	bfa_tskim_start(tskim, bfa_itnim,
-			    bfad_int_to_lun(cmnd->device->lun),
+	int_to_scsilun(cmnd->device->lun, &scsilun);
+	bfa_tskim_start(tskim, bfa_itnim, scsilun,
 			    FCP_TM_LUN_RESET, BFAD_LUN_RESET_TMO);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
@@ -337,7 +339,7 @@ bfad_im_reset_lun_handler(struct scsi_cmnd *cmnd)
 
 	task_status = cmnd->SCp.Status >> 1;
 	if (task_status != BFI_TSKIM_STS_OK) {
-		BFA_LOG(KERN_ERR, bfad, log_level,
+		BFA_LOG(KERN_ERR, bfad, bfa_log_level,
 			"LUN reset failure, status: %d\n", task_status);
 		rc = FAILED;
 	}
@@ -364,7 +366,7 @@ bfad_im_reset_bus_handler(struct scsi_cmnd *cmnd)
 
 	spin_lock_irqsave(&bfad->bfad_lock, flags);
 	for (i = 0; i < MAX_FCP_TARGET; i++) {
-		itnim = bfad_os_get_itnim(im_port, i);
+		itnim = bfad_get_itnim(im_port, i);
 		if (itnim) {
 			cmnd->SCp.ptr = (char *)&wq;
 			rc = bfad_im_target_reset_send(bfad, cmnd, itnim);
@@ -381,7 +383,7 @@ bfad_im_reset_bus_handler(struct scsi_cmnd *cmnd)
 
 			task_status = cmnd->SCp.Status >> 1;
 			if (task_status != BFI_TSKIM_STS_OK) {
-				BFA_LOG(KERN_ERR, bfad, log_level,
+				BFA_LOG(KERN_ERR, bfad, bfa_log_level,
 					"target reset failure,"
 					" status: %d\n", task_status);
 				err_cnt++;
@@ -447,7 +449,7 @@ bfa_fcb_itnim_free(struct bfad_s *bfad, struct bfad_itnim_s *itnim_drv)
 	struct bfad_im_s	*im = itnim_drv->im;
 
 	/* online to free state transtion should not happen */
-	bfa_assert(itnim_drv->state != ITNIM_STATE_ONLINE);
+	WARN_ON(itnim_drv->state == ITNIM_STATE_ONLINE);
 
 	itnim_drv->queue_work = 1;
 	/* offline request is not yet done, use the same request to free */
@@ -461,7 +463,7 @@ bfa_fcb_itnim_free(struct bfad_s *bfad, struct bfad_itnim_s *itnim_drv)
 	fcid = bfa_fcs_itnim_get_fcid(&itnim_drv->fcs_itnim);
 	wwn2str(wwpn_str, wwpn);
 	fcid2str(fcid_str, fcid);
-	BFA_LOG(KERN_INFO, bfad, log_level,
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 		"ITNIM FREE scsi%d: FCID: %s WWPN: %s\n",
 		port->im_port->shost->host_no,
 		fcid_str, wwpn_str);
@@ -545,7 +547,7 @@ bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port,
 
 	mutex_unlock(&bfad_mutex);
 
-	im_port->shost = bfad_os_scsi_host_alloc(im_port, bfad);
+	im_port->shost = bfad_scsi_host_alloc(im_port, bfad);
 	if (!im_port->shost) {
 		error = 1;
 		goto out_free_idr;
@@ -571,7 +573,7 @@ bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port,
 	}
 
 	/* setup host fixed attribute if the lk supports */
-	bfad_os_fc_host_init(im_port);
+	bfad_fc_host_init(im_port);
 
 	return 0;
 
@@ -590,7 +592,7 @@ void
 bfad_im_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
 {
 	bfa_trc(bfad, bfad->inst_no);
-	BFA_LOG(KERN_INFO, bfad, log_level, "Free scsi%d\n",
+	BFA_LOG(KERN_INFO, bfad, bfa_log_level, "Free scsi%d\n",
 			im_port->shost->host_no);
 
 	fc_remove_host(im_port->shost);
@@ -662,7 +664,7 @@ bfad_im_port_clean(struct bfad_im_port_s *im_port)
 	}
 
 	/* the itnim_mapped_list must be empty at this time */
-	bfa_assert(list_empty(&im_port->itnim_mapped_list));
+	WARN_ON(!list_empty(&im_port->itnim_mapped_list));
 
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 }
@@ -682,7 +684,7 @@ bfad_im_probe(struct bfad_s *bfad)
 	bfad->im = im;
 	im->bfad = bfad;
 
-	if (bfad_os_thread_workq(bfad) != BFA_STATUS_OK) {
+	if (bfad_thread_workq(bfad) != BFA_STATUS_OK) {
 		kfree(im);
 		rc = BFA_STATUS_FAILED;
 	}
@@ -695,14 +697,14 @@ void
 bfad_im_probe_undo(struct bfad_s *bfad)
 {
 	if (bfad->im) {
-		bfad_os_destroy_workq(bfad->im);
+		bfad_destroy_workq(bfad->im);
 		kfree(bfad->im);
 		bfad->im = NULL;
 	}
 }
 
 struct Scsi_Host *
-bfad_os_scsi_host_alloc(struct bfad_im_port_s *im_port, struct bfad_s *bfad)
+bfad_scsi_host_alloc(struct bfad_im_port_s *im_port, struct bfad_s *bfad)
 {
 	struct scsi_host_template *sht;
 
@@ -717,7 +719,7 @@ bfad_os_scsi_host_alloc(struct bfad_im_port_s *im_port, struct bfad_s *bfad)
 }
 
 void
-bfad_os_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
+bfad_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
 {
 	if (!(im_port->flags & BFAD_PORT_DELETE))
 		flush_workqueue(bfad->im->drv_workq);
@@ -727,7 +729,7 @@ bfad_os_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
 }
 
 void
-bfad_os_destroy_workq(struct bfad_im_s *im)
+bfad_destroy_workq(struct bfad_im_s *im)
 {
 	if (im && im->drv_workq) {
 		flush_workqueue(im->drv_workq);
@@ -737,7 +739,7 @@ bfad_os_destroy_workq(struct bfad_im_s *im)
 }
 
 bfa_status_t
-bfad_os_thread_workq(struct bfad_s *bfad)
+bfad_thread_workq(struct bfad_s *bfad)
 {
 	struct bfad_im_s      *im = bfad->im;
 
@@ -841,7 +843,7 @@ bfad_im_module_exit(void)
 }
 
 void
-bfad_os_ramp_up_qdepth(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
+bfad_ramp_up_qdepth(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
 {
 	struct scsi_device *tmp_sdev;
 
@@ -869,7 +871,7 @@ bfad_os_ramp_up_qdepth(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
 }
 
 void
-bfad_os_handle_qfull(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
+bfad_handle_qfull(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
 {
 	struct scsi_device *tmp_sdev;
 
@@ -883,7 +885,7 @@ bfad_os_handle_qfull(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
 }
 
 struct bfad_itnim_s *
-bfad_os_get_itnim(struct bfad_im_port_s *im_port, int id)
+bfad_get_itnim(struct bfad_im_port_s *im_port, int id)
 {
 	struct bfad_itnim_s   *itnim = NULL;
 
@@ -922,7 +924,7 @@ bfad_im_supported_speeds(struct bfa_s *bfa)
 	if (!ioc_attr)
 		return 0;
 
-	bfa_get_attr(bfa, ioc_attr);
+	bfa_ioc_get_attr(&bfa->ioc, ioc_attr);
 	if (ioc_attr->adapter_attr.max_speed == BFA_PORT_SPEED_8GBPS) {
 		if (ioc_attr->adapter_attr.is_mezz) {
 			supported_speed |= FC_PORTSPEED_8GBIT |
@@ -944,7 +946,7 @@ bfad_im_supported_speeds(struct bfa_s *bfa)
 }
 
 void
-bfad_os_fc_host_init(struct bfad_im_port_s *im_port)
+bfad_fc_host_init(struct bfad_im_port_s *im_port)
 {
 	struct Scsi_Host *host = im_port->shost;
 	struct bfad_s         *bfad = im_port->bfad;
@@ -988,7 +990,7 @@ bfad_im_fc_rport_add(struct bfad_im_port_s *im_port, struct bfad_itnim_s *itnim)
 	rport_ids.port_name =
 		cpu_to_be64(bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim));
 	rport_ids.port_id =
-		bfa_os_hton3b(bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim));
+		bfa_hton3b(bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim));
 	rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
 
 	itnim->fc_rport = fc_rport =
@@ -1049,7 +1051,7 @@ bfad_im_itnim_work_handler(struct work_struct *work)
 			fcid2str(fcid_str, fcid);
 			list_add_tail(&itnim->list_entry,
 				&im_port->itnim_mapped_list);
-			BFA_LOG(KERN_INFO, bfad, log_level,
+			BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 				"ITNIM ONLINE Target: %d:0:%d "
 				"FCID: %s WWPN: %s\n",
 				im_port->shost->host_no,
@@ -1082,7 +1084,7 @@ bfad_im_itnim_work_handler(struct work_struct *work)
 			wwn2str(wwpn_str, wwpn);
 			fcid2str(fcid_str, fcid);
 			list_del(&itnim->list_entry);
-			BFA_LOG(KERN_INFO, bfad, log_level,
+			BFA_LOG(KERN_INFO, bfad, bfa_log_level,
 				"ITNIM OFFLINE Target: %d:0:%d "
 				"FCID: %s WWPN: %s\n",
 				im_port->shost->host_no,
@@ -1109,7 +1111,7 @@ bfad_im_itnim_work_handler(struct work_struct *work)
 		kfree(itnim);
 		break;
 	default:
-		bfa_assert(0);
+		WARN_ON(1);
 		break;
 	}
 
@@ -1120,7 +1122,7 @@ bfad_im_itnim_work_handler(struct work_struct *work)
  * Scsi_Host template entry, queue a SCSI command to the BFAD.
  */
 static int
-bfad_im_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
+bfad_im_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 {
 	struct bfad_im_port_s *im_port =
 		(struct bfad_im_port_s *) cmnd->device->host->hostdata[0];
@@ -1172,7 +1174,6 @@ bfad_im_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	}
 
 	cmnd->host_scribble = (char *)hal_io;
-	bfa_trc_fp(bfad, hal_io->iotag);
 	bfa_ioim_start(hal_io);
 	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
 
@@ -1187,8 +1188,10 @@ out_fail_cmd:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(bfad_im_queuecommand)
+
 void
-bfad_os_rport_online_wait(struct bfad_s *bfad)
+bfad_rport_online_wait(struct bfad_s *bfad)
 {
 	int i;
 	int rport_delay = 10;
@@ -1216,7 +1219,7 @@ bfad_os_rport_online_wait(struct bfad_s *bfad)
 }
 
 int
-bfad_os_get_linkup_delay(struct bfad_s *bfad)
+bfad_get_linkup_delay(struct bfad_s *bfad)
 {
 	u8		nwwns = 0;
 	wwn_t		wwns[BFA_PREBOOT_BOOTLUN_MAX];
diff --git a/drivers/scsi/bfa/bfad_im.h b/drivers/scsi/bfa/bfad_im.h
index b038c0e0892..bfee63b16fa 100644
--- a/drivers/scsi/bfa/bfad_im.h
+++ b/drivers/scsi/bfa/bfad_im.h
@@ -117,17 +117,17 @@ struct bfad_im_s {
 	char            drv_workq_name[KOBJ_NAME_LEN];
 };
 
-struct Scsi_Host *bfad_os_scsi_host_alloc(struct bfad_im_port_s *im_port,
+struct Scsi_Host *bfad_scsi_host_alloc(struct bfad_im_port_s *im_port,
 				struct bfad_s *);
-bfa_status_t bfad_os_thread_workq(struct bfad_s *bfad);
-void bfad_os_destroy_workq(struct bfad_im_s *im);
-void bfad_os_fc_host_init(struct bfad_im_port_s *im_port);
-void bfad_os_scsi_host_free(struct bfad_s *bfad,
+bfa_status_t bfad_thread_workq(struct bfad_s *bfad);
+void bfad_destroy_workq(struct bfad_im_s *im);
+void bfad_fc_host_init(struct bfad_im_port_s *im_port);
+void bfad_scsi_host_free(struct bfad_s *bfad,
 				 struct bfad_im_port_s *im_port);
-void bfad_os_ramp_up_qdepth(struct bfad_itnim_s *itnim,
+void bfad_ramp_up_qdepth(struct bfad_itnim_s *itnim,
 				 struct scsi_device *sdev);
-void bfad_os_handle_qfull(struct bfad_itnim_s *itnim, struct scsi_device *sdev);
-struct bfad_itnim_s *bfad_os_get_itnim(struct bfad_im_port_s *im_port, int id);
+void bfad_handle_qfull(struct bfad_itnim_s *itnim, struct scsi_device *sdev);
+struct bfad_itnim_s *bfad_get_itnim(struct bfad_im_port_s *im_port, int id);
 
 extern struct scsi_host_template bfad_im_scsi_host_template;
 extern struct scsi_host_template bfad_im_vport_template;
diff --git a/drivers/scsi/bfa/bfi.h b/drivers/scsi/bfa/bfi.h
index 58796d1284b..72b69a0c3b5 100644
--- a/drivers/scsi/bfa/bfi.h
+++ b/drivers/scsi/bfa/bfi.h
@@ -95,8 +95,8 @@ enum {
  */
 union bfi_addr_u {
 	struct {
-		u32	addr_lo;
-		u32	addr_hi;
+		__be32	addr_lo;
+		__be32	addr_hi;
 	} a32;
 };
 
@@ -104,7 +104,7 @@ union bfi_addr_u {
  * Scatter Gather Element
  */
 struct bfi_sge_s {
-#ifdef __BIGENDIAN
+#ifdef __BIG_ENDIAN
 	u32	flags:2,
 			rsvd:2,
 			sg_len:28;
@@ -399,7 +399,7 @@ union bfi_ioc_i2h_msg_u {
  */
 struct bfi_pbc_blun_s {
 	wwn_t		tgt_pwwn;
-	lun_t		tgt_lun;
+	struct scsi_lun	tgt_lun;
 };
 
 /*
diff --git a/drivers/scsi/bfa/bfi_cbreg.h b/drivers/scsi/bfa/bfi_cbreg.h
index 6f03ed382c6..39ad42b66b5 100644
--- a/drivers/scsi/bfa/bfi_cbreg.h
+++ b/drivers/scsi/bfa/bfi_cbreg.h
@@ -208,6 +208,7 @@
 #define BFA_IOC1_HBEAT_REG               HOST_SEM2_INFO_REG
 #define BFA_IOC1_STATE_REG               HOST_SEM3_INFO_REG
 #define BFA_FW_USE_COUNT                 HOST_SEM4_INFO_REG
+#define BFA_IOC_FAIL_SYNC		 HOST_SEM5_INFO_REG
 
 #define CPE_Q_DEPTH(__n) \
 	(CPE_Q0_DEPTH + (__n) * (CPE_Q1_DEPTH - CPE_Q0_DEPTH))
diff --git a/drivers/scsi/bfa/bfi_ctreg.h b/drivers/scsi/bfa/bfi_ctreg.h
index 62b86a4b0e4..fc4ce4a5a18 100644
--- a/drivers/scsi/bfa/bfi_ctreg.h
+++ b/drivers/scsi/bfa/bfi_ctreg.h
@@ -522,6 +522,7 @@ enum {
 #define BFA_IOC1_HBEAT_REG		HOST_SEM2_INFO_REG
 #define BFA_IOC1_STATE_REG		HOST_SEM3_INFO_REG
 #define BFA_FW_USE_COUNT		 HOST_SEM4_INFO_REG
+#define BFA_IOC_FAIL_SYNC		HOST_SEM5_INFO_REG
 
 #define CPE_DEPTH_Q(__n) \
 	(CPE_DEPTH_Q0 + (__n) * (CPE_DEPTH_Q1 - CPE_DEPTH_Q0))
@@ -539,22 +540,30 @@ enum {
 	(RME_PI_PTR_Q0 + (__n) * (RME_PI_PTR_Q1 - RME_PI_PTR_Q0))
 #define RME_CI_PTR_Q(__n) \
 	(RME_CI_PTR_Q0 + (__n) * (RME_CI_PTR_Q1 - RME_CI_PTR_Q0))
-#define HQM_QSET_RXQ_DRBL_P0(__n) (HQM_QSET0_RXQ_DRBL_P0 + (__n) \
-	* (HQM_QSET1_RXQ_DRBL_P0 - HQM_QSET0_RXQ_DRBL_P0))
-#define HQM_QSET_TXQ_DRBL_P0(__n) (HQM_QSET0_TXQ_DRBL_P0 + (__n) \
-	* (HQM_QSET1_TXQ_DRBL_P0 - HQM_QSET0_TXQ_DRBL_P0))
-#define HQM_QSET_IB_DRBL_1_P0(__n) (HQM_QSET0_IB_DRBL_1_P0 + (__n) \
-	* (HQM_QSET1_IB_DRBL_1_P0 - HQM_QSET0_IB_DRBL_1_P0))
-#define HQM_QSET_IB_DRBL_2_P0(__n) (HQM_QSET0_IB_DRBL_2_P0 + (__n) \
-	* (HQM_QSET1_IB_DRBL_2_P0 - HQM_QSET0_IB_DRBL_2_P0))
-#define HQM_QSET_RXQ_DRBL_P1(__n) (HQM_QSET0_RXQ_DRBL_P1 + (__n) \
-	* (HQM_QSET1_RXQ_DRBL_P1 - HQM_QSET0_RXQ_DRBL_P1))
-#define HQM_QSET_TXQ_DRBL_P1(__n) (HQM_QSET0_TXQ_DRBL_P1 + (__n) \
-	* (HQM_QSET1_TXQ_DRBL_P1 - HQM_QSET0_TXQ_DRBL_P1))
-#define HQM_QSET_IB_DRBL_1_P1(__n) (HQM_QSET0_IB_DRBL_1_P1 + (__n) \
-	* (HQM_QSET1_IB_DRBL_1_P1 - HQM_QSET0_IB_DRBL_1_P1))
-#define HQM_QSET_IB_DRBL_2_P1(__n) (HQM_QSET0_IB_DRBL_2_P1 + (__n) \
-	* (HQM_QSET1_IB_DRBL_2_P1 - HQM_QSET0_IB_DRBL_2_P1))
+#define HQM_QSET_RXQ_DRBL_P0(__n) \
+	(HQM_QSET0_RXQ_DRBL_P0 + (__n) *	\
+	(HQM_QSET1_RXQ_DRBL_P0 - HQM_QSET0_RXQ_DRBL_P0))
+#define HQM_QSET_TXQ_DRBL_P0(__n) \
+	(HQM_QSET0_TXQ_DRBL_P0 + (__n) *	\
+	(HQM_QSET1_TXQ_DRBL_P0 - HQM_QSET0_TXQ_DRBL_P0))
+#define HQM_QSET_IB_DRBL_1_P0(__n) \
+	(HQM_QSET0_IB_DRBL_1_P0 + (__n) *	\
+	(HQM_QSET1_IB_DRBL_1_P0 - HQM_QSET0_IB_DRBL_1_P0))
+#define HQM_QSET_IB_DRBL_2_P0(__n) \
+	(HQM_QSET0_IB_DRBL_2_P0 + (__n) *	\
+	(HQM_QSET1_IB_DRBL_2_P0 - HQM_QSET0_IB_DRBL_2_P0))
+#define HQM_QSET_RXQ_DRBL_P1(__n) \
+	(HQM_QSET0_RXQ_DRBL_P1 + (__n) *	\
+	(HQM_QSET1_RXQ_DRBL_P1 - HQM_QSET0_RXQ_DRBL_P1))
+#define HQM_QSET_TXQ_DRBL_P1(__n) \
+	(HQM_QSET0_TXQ_DRBL_P1 + (__n) *	\
+	(HQM_QSET1_TXQ_DRBL_P1 - HQM_QSET0_TXQ_DRBL_P1))
+#define HQM_QSET_IB_DRBL_1_P1(__n) \
+	(HQM_QSET0_IB_DRBL_1_P1 + (__n) *	\
+	(HQM_QSET1_IB_DRBL_1_P1 - HQM_QSET0_IB_DRBL_1_P1))
+#define HQM_QSET_IB_DRBL_2_P1(__n) \
+	(HQM_QSET0_IB_DRBL_2_P1 + (__n) *	\
+	(HQM_QSET1_IB_DRBL_2_P1 - HQM_QSET0_IB_DRBL_2_P1))
 
 #define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
 #define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
diff --git a/drivers/scsi/bfa/bfi_ms.h b/drivers/scsi/bfa/bfi_ms.h
index fa9f6fb9d45..19e888a5755 100644
--- a/drivers/scsi/bfa/bfi_ms.h
+++ b/drivers/scsi/bfa/bfi_ms.h
@@ -47,10 +47,10 @@ struct bfi_iocfc_cfg_s {
 	 */
 	union bfi_addr_u  req_cq_ba[BFI_IOC_MAX_CQS];
 	union bfi_addr_u  req_shadow_ci[BFI_IOC_MAX_CQS];
-	u16    req_cq_elems[BFI_IOC_MAX_CQS];
+	__be16    req_cq_elems[BFI_IOC_MAX_CQS];
 	union bfi_addr_u  rsp_cq_ba[BFI_IOC_MAX_CQS];
 	union bfi_addr_u  rsp_shadow_pi[BFI_IOC_MAX_CQS];
-	u16    rsp_cq_elems[BFI_IOC_MAX_CQS];
+	__be16    rsp_cq_elems[BFI_IOC_MAX_CQS];
 
 	union bfi_addr_u  stats_addr;	/*  DMA-able address for stats	  */
 	union bfi_addr_u  cfgrsp_addr;	/*  config response dma address  */
@@ -102,8 +102,8 @@ struct bfi_iocfc_set_intr_req_s {
 	struct bfi_mhdr_s mh;		/*  common msg header		*/
 	u8		coalesce;	/*  enable intr coalescing	*/
 	u8		rsvd[3];
-	u16	delay;		/*  delay timer 0..1125us	*/
-	u16	latency;	/*  latency timer 0..225us	*/
+	__be16	delay;		/*  delay timer 0..1125us	*/
+	__be16	latency;	/*  latency timer 0..225us	*/
 };
 
 
@@ -188,7 +188,8 @@ struct bfi_fcport_rsp_s {
 	struct bfi_mhdr_s  mh;		/*  common msg header		    */
 	u8		   status;	/*  port enable status		    */
 	u8		   rsvd[3];
-	u32	   msgtag;	/*  msgtag for reply		    */
+	struct	bfa_port_cfg_s port_cfg;/* port configuration	*/
+	u32	msgtag;			/* msgtag for reply	*/
 };
 
 /*
@@ -202,7 +203,8 @@ struct bfi_fcport_enable_req_s {
 	struct bfa_port_cfg_s port_cfg; /*  port configuration	    */
 	union bfi_addr_u   stats_dma_addr; /*  DMA address for stats	    */
 	u32	   msgtag;	/*  msgtag for reply		    */
-	u32	   rsvd2;
+	u8	use_flash_cfg;	/* get prot cfg from flash */
+	u8	rsvd2[3];
 };
 
 /*
@@ -210,7 +212,7 @@ struct bfi_fcport_enable_req_s {
  */
 struct bfi_fcport_set_svc_params_req_s {
 	struct bfi_mhdr_s  mh;		/*  msg header */
-	u16	   tx_bbcredit;	/*  Tx credits */
+	__be16	   tx_bbcredit;	/*  Tx credits */
 	u16	   rsvd;
 };
 
@@ -231,7 +233,7 @@ struct bfi_fcport_trunk_link_s {
 	u8			state;		/* bfa_trunk_link_state_t */
 	u8			speed;		/* bfa_port_speed_t */
 	u8			rsvd;
-	u32		deskew;
+	__be32		deskew;
 };
 
 #define BFI_FCPORT_MAX_LINKS	2
@@ -284,17 +286,17 @@ enum bfi_fcxp_i2h {
  */
 struct bfi_fcxp_send_req_s {
 	struct bfi_mhdr_s  mh;		/*  Common msg header		    */
-	u16	fcxp_tag;	/*  driver request tag		    */
-	u16	max_frmsz;	/*  max send frame size	    */
-	u16	vf_id;		/*  vsan tag if applicable	    */
+	__be16	fcxp_tag;	/*  driver request tag		    */
+	__be16	max_frmsz;	/*  max send frame size	    */
+	__be16	vf_id;		/*  vsan tag if applicable	    */
 	u16	rport_fw_hndl;	/*  FW Handle for the remote port  */
 	u8	 class;		/*  FC class used for req/rsp	    */
 	u8	 rsp_timeout;	/*  timeout in secs, 0-no response */
 	u8	 cts;		/*  continue sequence		    */
 	u8	 lp_tag;	/*  lport tag			    */
 	struct fchs_s	fchs;	/*  request FC header structure    */
-	u32	req_len;	/*  request payload length	    */
-	u32	rsp_maxlen;	/*  max response length expected   */
+	__be32	req_len;	/*  request payload length	    */
+	__be32	rsp_maxlen;	/*  max response length expected   */
 	struct bfi_sge_s   req_sge[BFA_FCXP_MAX_SGES];	/*  request buf    */
 	struct bfi_sge_s   rsp_sge[BFA_FCXP_MAX_SGES];	/*  response buf   */
 };
@@ -304,11 +306,11 @@ struct bfi_fcxp_send_req_s {
  */
 struct bfi_fcxp_send_rsp_s {
 	struct bfi_mhdr_s  mh;		/*  Common msg header		    */
-	u16	fcxp_tag;	/*  send request tag		    */
+	__be16	fcxp_tag;	/*  send request tag		    */
 	u8	 req_status;	/*  request status		    */
 	u8	 rsvd;
-	u32	rsp_len;	/*  actual response length	    */
-	u32	residue_len;	/*  residual response length	    */
+	__be32	rsp_len;	/*  actual response length	    */
+	__be32	residue_len;	/*  residual response length	    */
 	struct fchs_s	fchs;	/*  response FC header structure   */
 };
 
@@ -325,7 +327,7 @@ enum bfi_uf_i2h {
 struct bfi_uf_buf_post_s {
 	struct bfi_mhdr_s  mh;		/*  Common msg header		*/
 	u16	buf_tag;	/*  buffer tag			*/
-	u16	buf_len;	/*  total buffer length	*/
+	__be16	buf_len;	/*  total buffer length	*/
 	struct bfi_sge_s   sge[BFA_UF_MAX_SGES]; /*  buffer DMA SGEs	*/
 };
 
@@ -340,6 +342,7 @@ struct bfi_uf_frm_rcvd_s {
 enum bfi_lps_h2i_msgs {
 	BFI_LPS_H2I_LOGIN_REQ	= 1,
 	BFI_LPS_H2I_LOGOUT_REQ	= 2,
+	BFI_LPS_H2I_N2N_PID_REQ = 3,
 };
 
 enum bfi_lps_i2h_msgs {
@@ -352,7 +355,7 @@ struct bfi_lps_login_req_s {
 	struct bfi_mhdr_s  mh;		/*  common msg header		*/
 	u8		lp_tag;
 	u8		alpa;
-	u16	pdu_size;
+	__be16		pdu_size;
 	wwn_t		pwwn;
 	wwn_t		nwwn;
 	u8		fdisc;
@@ -368,7 +371,7 @@ struct bfi_lps_login_rsp_s {
 	u8		lsrjt_expl;
 	wwn_t		port_name;
 	wwn_t		node_name;
-	u16	bb_credit;
+	__be16		bb_credit;
 	u8		f_port;
 	u8		npiv_en;
 	u32	lp_pid:24;
@@ -399,10 +402,17 @@ struct bfi_lps_cvl_event_s {
 	u8		rsvd[3];
 };
 
+struct bfi_lps_n2n_pid_req_s {
+	struct bfi_mhdr_s	mh;	/*  common msg header		*/
+	u8	lp_tag;
+	u32	lp_pid:24;
+};
+
 union bfi_lps_h2i_msg_u {
 	struct bfi_mhdr_s		*msg;
 	struct bfi_lps_login_req_s	*login_req;
 	struct bfi_lps_logout_req_s	*logout_req;
+	struct bfi_lps_n2n_pid_req_s	*n2n_pid_req;
 };
 
 union bfi_lps_i2h_msg_u {
@@ -427,7 +437,7 @@ enum bfi_rport_i2h_msgs {
 struct bfi_rport_create_req_s {
 	struct bfi_mhdr_s  mh;		/*  common msg header		*/
 	u16	bfa_handle;	/*  host rport handle		*/
-	u16	max_frmsz;	/*  max rcv pdu size		*/
+	__be16	max_frmsz;	/*  max rcv pdu size		*/
 	u32	pid:24,	/*  remote port ID		*/
 		lp_tag:8;	/*  local port tag		*/
 	u32	local_pid:24,	/*  local port ID		*/
@@ -583,7 +593,7 @@ struct bfi_ioim_dif_s {
  */
 struct bfi_ioim_req_s {
 	struct bfi_mhdr_s  mh;		/*  Common msg header		 */
-	u16	io_tag;		/*  I/O tag			 */
+	__be16	io_tag;		/*  I/O tag			 */
 	u16	rport_hdl;	/*  itnim/rport firmware handle */
 	struct fcp_cmnd_s	cmnd;	/*  IO request info	*/
 
@@ -689,7 +699,7 @@ enum bfi_ioim_status {
  */
 struct bfi_ioim_rsp_s {
 	struct bfi_mhdr_s	mh;	/*  common msg header		*/
-	u16	io_tag;		/*  completed IO tag		 */
+	__be16	io_tag;		/*  completed IO tag		 */
 	u16	bfa_rport_hndl;	/*  releated rport handle	 */
 	u8	io_status;	/*  IO completion status	 */
 	u8	reuse_io_tag;	/*  IO tag can be reused	*/
@@ -698,13 +708,13 @@ struct bfi_ioim_rsp_s {
 	u8		sns_len;	/*  scsi sense length		 */
 	u8		resid_flags;	/*  IO residue flags		 */
 	u8		rsvd_a;
-	u32	residue;	/*  IO residual length in bytes */
+	__be32	residue;	/*  IO residual length in bytes */
 	u32	rsvd_b[3];
 };
 
 struct bfi_ioim_abort_req_s {
 	struct bfi_mhdr_s  mh;	/*  Common msg header  */
-	u16	io_tag;	/*  I/O tag	*/
+	__be16	io_tag;	/*  I/O tag	*/
 	u16	abort_tag;	/*  unique request tag */
 };
 
@@ -723,9 +733,9 @@ enum bfi_tskim_i2h {
 
 struct bfi_tskim_req_s {
 	struct bfi_mhdr_s  mh;	/*  Common msg header	*/
-	u16	tsk_tag;	/*  task management tag	*/
+	__be16	tsk_tag;	/*  task management tag	*/
 	u16	itn_fhdl;	/*  itn firmware handle	*/
-	lun_t	lun;	/*  LU number	*/
+	struct 	scsi_lun lun;	/*  LU number	*/
 	u8	tm_flags;	/*  see enum fcp_tm_cmnd	*/
 	u8	t_secs;	/*  Timeout value in seconds	*/
 	u8	rsvd[2];
@@ -733,7 +743,7 @@ struct bfi_tskim_req_s {
 
 struct bfi_tskim_abortreq_s {
 	struct bfi_mhdr_s  mh;	/*  Common msg header	*/
-	u16	tsk_tag;	/*  task management tag	*/
+	__be16	tsk_tag;	/*  task management tag	*/
 	u16	rsvd;
 };
 
@@ -755,7 +765,7 @@ enum bfi_tskim_status {
 
 struct bfi_tskim_rsp_s {
 	struct bfi_mhdr_s  mh;		/*  Common msg header		 */
-	u16	tsk_tag;	/*  task mgmt cmnd tag		 */
+	__be16	tsk_tag;	/*  task mgmt cmnd tag		 */
 	u8	tsk_status;	/*  @ref bfi_tskim_status */
 	u8	rsvd;
 };
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_constants.h b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
index 1b6f86b2482..30e6bdbd65a 100644
--- a/drivers/scsi/bnx2i/57xx_iscsi_constants.h
+++ b/drivers/scsi/bnx2i/57xx_iscsi_constants.h
@@ -1,12 +1,13 @@
 /* 57xx_iscsi_constants.h: Broadcom NetXtreme II iSCSI HSI
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 #ifndef __57XX_ISCSI_CONSTANTS_H_
 #define __57XX_ISCSI_CONSTANTS_H_
diff --git a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
index 36af1afef9b..dad6c8a3431 100644
--- a/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
+++ b/drivers/scsi/bnx2i/57xx_iscsi_hsi.h
@@ -1,12 +1,13 @@
 /* 57xx_iscsi_hsi.h: Broadcom NetXtreme II iSCSI HSI.
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 #ifndef __57XX_ISCSI_HSI_LINUX_LE__
 #define __57XX_ISCSI_HSI_LINUX_LE__
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index a44b1b33fa1..e1ca5fe7e6b 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -1,6 +1,6 @@
 /* bnx2i.h: Broadcom NetXtreme II iSCSI driver.
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
  * Copyright (c) 2007, 2008 Mike Christie
  *
@@ -9,6 +9,7 @@
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 
 #ifndef _BNX2I_H_
@@ -649,6 +650,7 @@ enum {
 	EP_STATE_OFLD_FAILED            = 0x8000000,
 	EP_STATE_CONNECT_FAILED         = 0x10000000,
 	EP_STATE_DISCONN_TIMEDOUT       = 0x20000000,
+	EP_STATE_OFLD_FAILED_CID_BUSY   = 0x80000000,
 };
 
 /**
@@ -717,14 +719,11 @@ extern struct device_attribute *bnx2i_dev_attributes[];
  * Function Prototypes
  */
 extern void bnx2i_identify_device(struct bnx2i_hba *hba);
-extern void bnx2i_register_device(struct bnx2i_hba *hba);
 
 extern void bnx2i_ulp_init(struct cnic_dev *dev);
 extern void bnx2i_ulp_exit(struct cnic_dev *dev);
 extern void bnx2i_start(void *handle);
 extern void bnx2i_stop(void *handle);
-extern void bnx2i_reg_dev_all(void);
-extern void bnx2i_unreg_dev_all(void);
 extern struct bnx2i_hba *get_adapter_list_head(void);
 
 struct bnx2i_conn *bnx2i_get_conn_from_id(struct bnx2i_hba *hba,
@@ -761,11 +760,11 @@ extern int bnx2i_send_iscsi_logout(struct bnx2i_conn *conn,
 				   struct iscsi_task *mtask);
 extern void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba,
 				       struct bnx2i_cmd *cmd);
-extern void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba,
-				     struct bnx2i_endpoint *ep);
-extern void bnx2i_update_iscsi_conn(struct iscsi_conn *conn);
-extern void bnx2i_send_conn_destroy(struct bnx2i_hba *hba,
+extern int bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba,
 				    struct bnx2i_endpoint *ep);
+extern void bnx2i_update_iscsi_conn(struct iscsi_conn *conn);
+extern int bnx2i_send_conn_destroy(struct bnx2i_hba *hba,
+				   struct bnx2i_endpoint *ep);
 
 extern int bnx2i_alloc_qp_resc(struct bnx2i_hba *hba,
 			       struct bnx2i_endpoint *ep);
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 8d9dbb33972..96505e3ab98 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -1,6 +1,6 @@
 /* bnx2i_hwi.c: Broadcom NetXtreme II iSCSI driver.
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
  * Copyright (c) 2007, 2008 Mike Christie
  *
@@ -9,6 +9,7 @@
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 
 #include <linux/gfp.h>
@@ -385,6 +386,7 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
 	struct bnx2i_cmd *bnx2i_cmd;
 	struct bnx2i_tmf_request *tmfabort_wqe;
 	u32 dword;
+	u32 scsi_lun[2];
 
 	bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
 	tmfabort_hdr = (struct iscsi_tm *)mtask->hdr;
@@ -426,7 +428,10 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
 	default:
 		tmfabort_wqe->ref_itt = RESERVED_ITT;
 	}
-	memcpy(tmfabort_wqe->lun, tmfabort_hdr->lun, sizeof(struct scsi_lun));
+	memcpy(scsi_lun, tmfabort_hdr->lun, sizeof(struct scsi_lun));
+	tmfabort_wqe->lun[0] = be32_to_cpu(scsi_lun[0]);
+	tmfabort_wqe->lun[1] = be32_to_cpu(scsi_lun[1]);
+
 	tmfabort_wqe->ref_cmd_sn = be32_to_cpu(tmfabort_hdr->refcmdsn);
 
 	tmfabort_wqe->bd_list_addr_lo = (u32) bnx2i_conn->hba->mp_bd_dma;
@@ -697,10 +702,11 @@ void bnx2i_send_cmd_cleanup_req(struct bnx2i_hba *hba, struct bnx2i_cmd *cmd)
  * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE to initiate
  * 	iscsi connection context clean-up process
  */
-void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+int bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
 {
 	struct kwqe *kwqe_arr[2];
 	struct iscsi_kwqe_conn_destroy conn_cleanup;
+	int rc = -EINVAL;
 
 	memset(&conn_cleanup, 0x00, sizeof(struct iscsi_kwqe_conn_destroy));
 
@@ -717,7 +723,9 @@ void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
 
 	kwqe_arr[0] = (struct kwqe *) &conn_cleanup;
 	if (hba->cnic && hba->cnic->submit_kwqes)
-		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+		rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, 1);
+
+	return rc;
 }
 
 
@@ -728,8 +736,8 @@ void bnx2i_send_conn_destroy(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
  *
  * 5706/5708/5709 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
  */
-static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
-					  struct bnx2i_endpoint *ep)
+static int bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
+					 struct bnx2i_endpoint *ep)
 {
 	struct kwqe *kwqe_arr[2];
 	struct iscsi_kwqe_conn_offload1 ofld_req1;
@@ -737,6 +745,7 @@ static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
 	dma_addr_t dma_addr;
 	int num_kwqes = 2;
 	u32 *ptbl;
+	int rc = -EINVAL;
 
 	ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
 	ofld_req1.hdr.flags =
@@ -774,7 +783,9 @@ static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
 	ofld_req2.num_additional_wqes = 0;
 
 	if (hba->cnic && hba->cnic->submit_kwqes)
-		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+		rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+
+	return rc;
 }
 
 
@@ -785,8 +796,8 @@ static void bnx2i_570x_send_conn_ofld_req(struct bnx2i_hba *hba,
  *
  * 57710 specific - prepares and posts CONN_OFLD_REQ1/2 KWQE
  */
-static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
-					   struct bnx2i_endpoint *ep)
+static int bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
+					  struct bnx2i_endpoint *ep)
 {
 	struct kwqe *kwqe_arr[5];
 	struct iscsi_kwqe_conn_offload1 ofld_req1;
@@ -795,6 +806,7 @@ static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
 	dma_addr_t dma_addr;
 	int num_kwqes = 2;
 	u32 *ptbl;
+	int rc = -EINVAL;
 
 	ofld_req1.hdr.op_code = ISCSI_KWQE_OPCODE_OFFLOAD_CONN1;
 	ofld_req1.hdr.flags =
@@ -840,7 +852,9 @@ static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
 	num_kwqes += 1;
 
 	if (hba->cnic && hba->cnic->submit_kwqes)
-		hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+		rc = hba->cnic->submit_kwqes(hba->cnic, kwqe_arr, num_kwqes);
+
+	return rc;
 }
 
 /**
@@ -851,12 +865,16 @@ static void bnx2i_5771x_send_conn_ofld_req(struct bnx2i_hba *hba,
  *
  * this routine prepares and posts CONN_OFLD_REQ1/2 KWQE
  */
-void bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
+int bnx2i_send_conn_ofld_req(struct bnx2i_hba *hba, struct bnx2i_endpoint *ep)
 {
+	int rc;
+
 	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type))
-		bnx2i_5771x_send_conn_ofld_req(hba, ep);
+		rc = bnx2i_5771x_send_conn_ofld_req(hba, ep);
 	else
-		bnx2i_570x_send_conn_ofld_req(hba, ep);
+		rc = bnx2i_570x_send_conn_ofld_req(hba, ep);
+
+	return rc;
 }
 
 
@@ -1513,7 +1531,7 @@ static void bnx2i_process_nopin_local_cmpl(struct iscsi_session *session,
 	task = iscsi_itt_to_task(conn,
 				 nop_in->itt & ISCSI_NOP_IN_MSG_INDEX);
 	if (task)
-		iscsi_put_task(task);
+		__iscsi_put_task(task);
 	spin_unlock(&session->lock);
 }
 
@@ -1549,11 +1567,9 @@ static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
 	struct iscsi_task *task;
 	struct bnx2i_nop_in_msg *nop_in;
 	struct iscsi_nopin *hdr;
-	u32 itt;
 	int tgt_async_nop = 0;
 
 	nop_in = (struct bnx2i_nop_in_msg *)cqe;
-	itt = nop_in->itt & ISCSI_NOP_IN_MSG_INDEX;
 
 	spin_lock(&session->lock);
 	hdr = (struct iscsi_nopin *)&bnx2i_conn->gen_pdu.resp_hdr;
@@ -1563,7 +1579,7 @@ static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
 	hdr->exp_cmdsn = cpu_to_be32(nop_in->exp_cmd_sn);
 	hdr->ttt = cpu_to_be32(nop_in->ttt);
 
-	if (itt == (u16) RESERVED_ITT) {
+	if (nop_in->itt == (u16) RESERVED_ITT) {
 		bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
 		hdr->itt = RESERVED_ITT;
 		tgt_async_nop = 1;
@@ -1571,7 +1587,8 @@ static int bnx2i_process_nopin_mesg(struct iscsi_session *session,
 	}
 
 	/* this is a response to one of our nop-outs */
-	task = iscsi_itt_to_task(conn, itt);
+	task = iscsi_itt_to_task(conn,
+			 (itt_t) (nop_in->itt & ISCSI_NOP_IN_MSG_INDEX));
 	if (task) {
 		hdr->flags = ISCSI_FLAG_CMD_FINAL;
 		hdr->itt = task->hdr->itt;
@@ -1721,9 +1738,18 @@ static void bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
 		if (nopin->cq_req_sn != qp->cqe_exp_seq_sn)
 			break;
 
-		if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx)))
+		if (unlikely(test_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx))) {
+			if (nopin->op_code == ISCSI_OP_NOOP_IN &&
+			    nopin->itt == (u16) RESERVED_ITT) {
+				printk(KERN_ALERT "bnx2i: Unsolicited "
+					"NOP-In detected for suspended "
+					"connection dev=%s!\n",
+					bnx2i_conn->hba->netdev->name);
+				bnx2i_unsol_pdu_adjust_rq(bnx2i_conn);
+				goto cqe_out;
+			}
 			break;
-
+		}
 		tgt_async_msg = 0;
 
 		switch (nopin->op_code) {
@@ -1770,10 +1796,9 @@ static void bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
 			printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
 					  nopin->op_code);
 		}
-
 		if (!tgt_async_msg)
 			bnx2i_conn->ep->num_active_cmds--;
-
+cqe_out:
 		/* clear out in production version only, till beta keep opcode
 		 * field intact, will be helpful in debugging (context dump)
 		 * nopin->op_code = 0;
@@ -2154,11 +2179,24 @@ static void bnx2i_process_ofld_cmpl(struct bnx2i_hba *hba,
 	}
 
 	if (ofld_kcqe->completion_status) {
+		ep->state = EP_STATE_OFLD_FAILED;
 		if (ofld_kcqe->completion_status ==
 		    ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE)
-			printk(KERN_ALERT "bnx2i: unable to allocate"
-					  " iSCSI context resources\n");
-		ep->state = EP_STATE_OFLD_FAILED;
+			printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - unable "
+				"to allocate iSCSI context resources\n",
+				hba->netdev->name);
+		else if (ofld_kcqe->completion_status ==
+			 ISCSI_KCQE_COMPLETION_STATUS_INVALID_OPCODE)
+			printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - invalid "
+				"opcode\n", hba->netdev->name);
+		else if (ofld_kcqe->completion_status ==
+			ISCSI_KCQE_COMPLETION_STATUS_CID_BUSY)
+			/* error status code valid only for 5771x chipset */
+			ep->state = EP_STATE_OFLD_FAILED_CID_BUSY;
+		else
+			printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - invalid "
+				"error code %d\n", hba->netdev->name,
+				ofld_kcqe->completion_status);
 	} else {
 		ep->state = EP_STATE_OFLD_COMPL;
 		cid_addr = ofld_kcqe->iscsi_conn_context_id;
@@ -2339,26 +2377,32 @@ static void bnx2i_cm_remote_close(struct cnic_sock *cm_sk)
 static void bnx2i_cm_remote_abort(struct cnic_sock *cm_sk)
 {
 	struct bnx2i_endpoint *ep = (struct bnx2i_endpoint *) cm_sk->context;
+	u32 old_state = ep->state;
 
 	ep->state = EP_STATE_TCP_RST_RCVD;
-	if (ep->conn)
-		bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
+	if (old_state == EP_STATE_DISCONN_START)
+		wake_up_interruptible(&ep->ofld_wait);
+	else
+		if (ep->conn)
+			bnx2i_recovery_que_add_conn(ep->hba, ep->conn);
 }
 
 
-static void bnx2i_send_nl_mesg(struct cnic_dev *dev, u32 msg_type,
+static int bnx2i_send_nl_mesg(void *context, u32 msg_type,
 			       char *buf, u16 buflen)
 {
-	struct bnx2i_hba *hba;
+	struct bnx2i_hba *hba = context;
+	int rc;
 
-	hba = bnx2i_find_hba_for_cnic(dev);
 	if (!hba)
-		return;
+		return -ENODEV;
 
-	if (iscsi_offload_mesg(hba->shost, &bnx2i_iscsi_transport,
-				   msg_type, buf, buflen))
+	rc = iscsi_offload_mesg(hba->shost, &bnx2i_iscsi_transport,
+				msg_type, buf, buflen);
+	if (rc)
 		printk(KERN_ALERT "bnx2i: private nl message send error\n");
 
+	return rc;
 }
 
 
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
index 50c2aa3b8eb..72a7b2d4a43 100644
--- a/drivers/scsi/bnx2i/bnx2i_init.c
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -1,6 +1,6 @@
 /* bnx2i.c: Broadcom NetXtreme II iSCSI driver.
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
  * Copyright (c) 2007, 2008 Mike Christie
  *
@@ -9,6 +9,7 @@
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 
 #include "bnx2i.h"
@@ -17,8 +18,8 @@ static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
 static u32 adapter_count;
 
 #define DRV_MODULE_NAME		"bnx2i"
-#define DRV_MODULE_VERSION	"2.1.3"
-#define DRV_MODULE_RELDATE	"Aug 10, 2010"
+#define DRV_MODULE_VERSION	"2.6.2.2"
+#define DRV_MODULE_RELDATE	"Nov 23, 2010"
 
 static char version[] __devinitdata =
 		"Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
@@ -65,8 +66,6 @@ MODULE_PARM_DESC(rq_size, "Configure RQ size");
 
 u64 iscsi_error_mask = 0x00;
 
-static void bnx2i_unreg_one_device(struct bnx2i_hba *hba) ;
-
 
 /**
  * bnx2i_identify_device - identifies NetXtreme II device type
@@ -211,13 +210,24 @@ void bnx2i_stop(void *handle)
 {
 	struct bnx2i_hba *hba = handle;
 	int conns_active;
+	int wait_delay = 1 * HZ;
 
 	/* check if cleanup happened in GOING_DOWN context */
-	if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN,
-				&hba->adapter_state))
+	if (!test_and_set_bit(ADAPTER_STATE_GOING_DOWN,
+			      &hba->adapter_state)) {
 		iscsi_host_for_each_session(hba->shost,
 					    bnx2i_drop_session);
-
+		wait_delay = hba->hba_shutdown_tmo;
+	}
+	/* Wait for inflight offload connection tasks to complete before
+	 * proceeding. Forcefully terminate all connection recovery in
+	 * progress at the earliest, either in bind(), send_pdu(LOGIN),
+	 * or conn_start()
+	 */
+	wait_event_interruptible_timeout(hba->eh_wait,
+					 (list_empty(&hba->ep_ofld_list) &&
+					 list_empty(&hba->ep_destroy_list)),
+					 10 * HZ);
 	/* Wait for all endpoints to be torn down, Chip will be reset once
 	 *  control returns to network driver. So it is required to cleanup and
 	 * release all connection resources before returning from this routine.
@@ -226,7 +236,7 @@ void bnx2i_stop(void *handle)
 		conns_active = hba->ofld_conns_active;
 		wait_event_interruptible_timeout(hba->eh_wait,
 				(hba->ofld_conns_active != conns_active),
-				hba->hba_shutdown_tmo);
+				wait_delay);
 		if (hba->ofld_conns_active == conns_active)
 			break;
 	}
@@ -235,88 +245,10 @@ void bnx2i_stop(void *handle)
 	/* This flag should be cleared last so that ep_disconnect() gracefully
 	 * cleans up connection context
 	 */
+	clear_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state);
 	clear_bit(ADAPTER_STATE_UP, &hba->adapter_state);
 }
 
-/**
- * bnx2i_register_device - register bnx2i adapter instance with the cnic driver
- * @hba:	Adapter instance to register
- *
- * registers bnx2i adapter instance with the cnic driver while holding the
- *	adapter structure lock
- */
-void bnx2i_register_device(struct bnx2i_hba *hba)
-{
-	int rc;
-
-	if (test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state) ||
-	    test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
-		return;
-	}
-
-	rc = hba->cnic->register_device(hba->cnic, CNIC_ULP_ISCSI, hba);
-
-	if (!rc)
-		set_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
-}
-
-
-/**
- * bnx2i_reg_dev_all - registers all adapter instances with the cnic driver
- *
- * registers all bnx2i adapter instances with the cnic driver while holding
- *	the global resource lock
- */
-void bnx2i_reg_dev_all(void)
-{
-	struct bnx2i_hba *hba, *temp;
-
-	mutex_lock(&bnx2i_dev_lock);
-	list_for_each_entry_safe(hba, temp, &adapter_list, link)
-		bnx2i_register_device(hba);
-	mutex_unlock(&bnx2i_dev_lock);
-}
-
-
-/**
- * bnx2i_unreg_one_device - unregister adapter instance with the cnic driver
- * @hba:	Adapter instance to unregister
- *
- * registers bnx2i adapter instance with the cnic driver while holding
- *	the adapter structure lock
- */
-static void bnx2i_unreg_one_device(struct bnx2i_hba *hba)
-{
-	if (hba->ofld_conns_active ||
-	    !test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) ||
-	    test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state))
-		return;
-
-	hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
-
-	/* ep_disconnect could come before NETDEV_DOWN, driver won't
-	 * see NETDEV_DOWN as it already unregistered itself.
-	 */
-	hba->adapter_state = 0;
-	clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
-}
-
-/**
- * bnx2i_unreg_dev_all - unregisters all bnx2i instances with the cnic driver
- *
- * unregisters all bnx2i adapter instances with the cnic driver while holding
- *	the global resource lock
- */
-void bnx2i_unreg_dev_all(void)
-{
-	struct bnx2i_hba *hba, *temp;
-
-	mutex_lock(&bnx2i_dev_lock);
-	list_for_each_entry_safe(hba, temp, &adapter_list, link)
-		bnx2i_unreg_one_device(hba);
-	mutex_unlock(&bnx2i_dev_lock);
-}
-
 
 /**
  * bnx2i_init_one - initialize an adapter instance and allocate memory resources
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index fb50efbce08..f0dce26593e 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1,7 +1,7 @@
 /*
  * bnx2i_iscsi.c: Broadcom NetXtreme II iSCSI driver.
  *
- * Copyright (c) 2006 - 2009 Broadcom Corporation
+ * Copyright (c) 2006 - 2010 Broadcom Corporation
  * Copyright (c) 2007, 2008 Red Hat, Inc.  All rights reserved.
  * Copyright (c) 2007, 2008 Mike Christie
  *
@@ -10,6 +10,7 @@
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 
 #include <linux/slab.h>
@@ -411,7 +412,9 @@ static void bnx2i_free_ep(struct iscsi_endpoint *ep)
 	bnx2i_ep->state = EP_STATE_IDLE;
 	bnx2i_ep->hba->ofld_conns_active--;
 
-	bnx2i_free_iscsi_cid(bnx2i_ep->hba, bnx2i_ep->ep_iscsi_cid);
+	if (bnx2i_ep->ep_iscsi_cid != (u16) -1)
+		bnx2i_free_iscsi_cid(bnx2i_ep->hba, bnx2i_ep->ep_iscsi_cid);
+
 	if (bnx2i_ep->conn) {
 		bnx2i_ep->conn->ep = NULL;
 		bnx2i_ep->conn = NULL;
@@ -1383,6 +1386,12 @@ static int bnx2i_conn_bind(struct iscsi_cls_session *cls_session,
 	ep = iscsi_lookup_endpoint(transport_fd);
 	if (!ep)
 		return -EINVAL;
+	/*
+	 * Forcefully terminate all in progress connection recovery at the
+	 * earliest, either in bind(), send_pdu(LOGIN), or conn_start()
+	 */
+	if (bnx2i_adapter_ready(hba))
+		return -EIO;
 
 	bnx2i_ep = ep->dd_data;
 	if ((bnx2i_ep->state == EP_STATE_TCP_FIN_RCVD) ||
@@ -1404,7 +1413,6 @@ static int bnx2i_conn_bind(struct iscsi_cls_session *cls_session,
 				  hba->netdev->name);
 		return -EEXIST;
 	}
-
 	bnx2i_ep->conn = bnx2i_conn;
 	bnx2i_conn->ep = bnx2i_ep;
 	bnx2i_conn->iscsi_conn_cid = bnx2i_ep->ep_iscsi_cid;
@@ -1461,21 +1469,28 @@ static int bnx2i_conn_get_param(struct iscsi_cls_conn *cls_conn,
 	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
 	int len = 0;
 
+	if (!(bnx2i_conn && bnx2i_conn->ep && bnx2i_conn->ep->hba))
+		goto out;
+
 	switch (param) {
 	case ISCSI_PARAM_CONN_PORT:
-		if (bnx2i_conn->ep)
+		mutex_lock(&bnx2i_conn->ep->hba->net_dev_lock);
+		if (bnx2i_conn->ep->cm_sk)
 			len = sprintf(buf, "%hu\n",
 				      bnx2i_conn->ep->cm_sk->dst_port);
+		mutex_unlock(&bnx2i_conn->ep->hba->net_dev_lock);
 		break;
 	case ISCSI_PARAM_CONN_ADDRESS:
-		if (bnx2i_conn->ep)
+		mutex_lock(&bnx2i_conn->ep->hba->net_dev_lock);
+		if (bnx2i_conn->ep->cm_sk)
 			len = sprintf(buf, "%pI4\n",
 				      &bnx2i_conn->ep->cm_sk->dst_ip);
+		mutex_unlock(&bnx2i_conn->ep->hba->net_dev_lock);
 		break;
 	default:
 		return iscsi_conn_get_param(cls_conn, param, buf);
 	}
-
+out:
 	return len;
 }
 
@@ -1599,8 +1614,6 @@ static struct bnx2i_hba *bnx2i_check_route(struct sockaddr *dst_addr)
 	struct bnx2i_hba *hba;
 	struct cnic_dev *cnic = NULL;
 
-	bnx2i_reg_dev_all();
-
 	hba = get_adapter_list_head();
 	if (hba && hba->cnic)
 		cnic = hba->cnic->cm_select_dev(desti, CNIC_ULP_ISCSI);
@@ -1640,18 +1653,26 @@ no_nx2_route:
 static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
 				 struct bnx2i_endpoint *ep)
 {
-	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic))
+	if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic) && ep->cm_sk)
 		hba->cnic->cm_destroy(ep->cm_sk);
 
-	if (test_bit(ADAPTER_STATE_GOING_DOWN, &ep->hba->adapter_state))
-		ep->state = EP_STATE_DISCONN_COMPL;
-
 	if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type) &&
 	    ep->state == EP_STATE_DISCONN_TIMEDOUT) {
-		printk(KERN_ALERT "bnx2i - ERROR - please submit GRC Dump,"
-				  " NW/PCIe trace, driver msgs to developers"
-				  " for analysis\n");
-		return 1;
+		if (ep->conn && ep->conn->cls_conn &&
+		    ep->conn->cls_conn->dd_data) {
+			struct iscsi_conn *conn = ep->conn->cls_conn->dd_data;
+
+			/* Must suspend all rx queue activity for this ep */
+			set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
+		}
+		/* CONN_DISCONNECT timeout may or may not be an issue depending
+		 * on what transcribed in TCP layer, different targets behave
+		 * differently
+		 */
+		printk(KERN_ALERT "bnx2i (%s): - WARN - CONN_DISCON timed out, "
+				  "please submit GRC Dump, NW/PCIe trace, "
+				  "driver msgs to developers for analysis\n",
+				  hba->netdev->name);
 	}
 
 	ep->state = EP_STATE_CLEANUP_START;
@@ -1664,7 +1685,9 @@ static int bnx2i_tear_down_conn(struct bnx2i_hba *hba,
 	bnx2i_ep_destroy_list_add(hba, ep);
 
 	/* destroy iSCSI context, wait for it to complete */
-	bnx2i_send_conn_destroy(hba, ep);
+	if (bnx2i_send_conn_destroy(hba, ep))
+		ep->state = EP_STATE_CLEANUP_CMPL;
+
 	wait_event_interruptible(ep->ofld_wait,
 				 (ep->state != EP_STATE_CLEANUP_START));
 
@@ -1711,8 +1734,6 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 	if (shost) {
 		/* driver is given scsi host to work with */
 		hba = iscsi_host_priv(shost);
-		/* Register the device with cnic if not already done so */
-		bnx2i_register_device(hba);
 	} else
 		/*
 		 * check if the given destination can be reached through
@@ -1720,13 +1741,17 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 		 */
 		hba = bnx2i_check_route(dst_addr);
 
-	if (!hba || test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state)) {
+	if (!hba) {
 		rc = -EINVAL;
 		goto nohba;
 	}
+	mutex_lock(&hba->net_dev_lock);
 
+	if (bnx2i_adapter_ready(hba) || !hba->cid_que.cid_free_cnt) {
+		rc = -EPERM;
+		goto check_busy;
+	}
 	cnic = hba->cnic;
-	mutex_lock(&hba->net_dev_lock);
 	ep = bnx2i_alloc_ep(hba);
 	if (!ep) {
 		rc = -ENOMEM;
@@ -1734,23 +1759,21 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 	}
 	bnx2i_ep = ep->dd_data;
 
-	if (bnx2i_adapter_ready(hba)) {
-		rc = -EPERM;
-		goto net_if_down;
-	}
-
 	bnx2i_ep->num_active_cmds = 0;
 	iscsi_cid = bnx2i_alloc_iscsi_cid(hba);
 	if (iscsi_cid == -1) {
-		printk(KERN_ALERT "alloc_ep: unable to allocate iscsi cid\n");
+		printk(KERN_ALERT "bnx2i (%s): alloc_ep - unable to allocate "
+			"iscsi cid\n", hba->netdev->name);
 		rc = -ENOMEM;
-		goto iscsi_cid_err;
+		bnx2i_free_ep(ep);
+		goto check_busy;
 	}
 	bnx2i_ep->hba_age = hba->age;
 
 	rc = bnx2i_alloc_qp_resc(hba, bnx2i_ep);
 	if (rc != 0) {
-		printk(KERN_ALERT "bnx2i: ep_conn, alloc QP resc error\n");
+		printk(KERN_ALERT "bnx2i (%s): ep_conn - alloc QP resc error"
+			"\n", hba->netdev->name);
 		rc = -ENOMEM;
 		goto qp_resc_err;
 	}
@@ -1765,7 +1788,18 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 	bnx2i_ep->ofld_timer.data = (unsigned long) bnx2i_ep;
 	add_timer(&bnx2i_ep->ofld_timer);
 
-	bnx2i_send_conn_ofld_req(hba, bnx2i_ep);
+	if (bnx2i_send_conn_ofld_req(hba, bnx2i_ep)) {
+		if (bnx2i_ep->state == EP_STATE_OFLD_FAILED_CID_BUSY) {
+			printk(KERN_ALERT "bnx2i (%s): iscsi cid %d is busy\n",
+				hba->netdev->name, bnx2i_ep->ep_iscsi_cid);
+			rc = -EBUSY;
+		} else
+			rc = -ENOSPC;
+		printk(KERN_ALERT "bnx2i (%s): unable to send conn offld kwqe"
+			"\n", hba->netdev->name);
+		bnx2i_ep_ofld_list_del(hba, bnx2i_ep);
+		goto conn_failed;
+	}
 
 	/* Wait for CNIC hardware to setup conn context and return 'cid' */
 	wait_event_interruptible(bnx2i_ep->ofld_wait,
@@ -1778,7 +1812,12 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 	bnx2i_ep_ofld_list_del(hba, bnx2i_ep);
 
 	if (bnx2i_ep->state != EP_STATE_OFLD_COMPL) {
-		rc = -ENOSPC;
+		if (bnx2i_ep->state == EP_STATE_OFLD_FAILED_CID_BUSY) {
+			printk(KERN_ALERT "bnx2i (%s): iscsi cid %d is busy\n",
+				hba->netdev->name, bnx2i_ep->ep_iscsi_cid);
+			rc = -EBUSY;
+		} else
+			rc = -ENOSPC;
 		goto conn_failed;
 	}
 
@@ -1786,7 +1825,8 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost,
 			     iscsi_cid, &bnx2i_ep->cm_sk, bnx2i_ep);
 	if (rc) {
 		rc = -EINVAL;
-		goto conn_failed;
+		/* Need to terminate and cleanup the connection */
+		goto release_ep;
 	}
 
 	bnx2i_ep->cm_sk->rcv_buf = 256 * 1024;
@@ -1830,15 +1870,12 @@ release_ep:
 		return ERR_PTR(rc);
 	}
 conn_failed:
-net_if_down:
-iscsi_cid_err:
 	bnx2i_free_qp_resc(hba, bnx2i_ep);
 qp_resc_err:
 	bnx2i_free_ep(ep);
 check_busy:
 	mutex_unlock(&hba->net_dev_lock);
 nohba:
-	bnx2i_unreg_dev_all();
 	return ERR_PTR(rc);
 }
 
@@ -1898,12 +1935,13 @@ static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
 		cnic_dev_10g = 1;
 
 	switch (bnx2i_ep->state) {
-	case EP_STATE_CONNECT_START:
+	case EP_STATE_CONNECT_FAILED:
 	case EP_STATE_CLEANUP_FAILED:
 	case EP_STATE_OFLD_FAILED:
 	case EP_STATE_DISCONN_TIMEDOUT:
 		ret = 0;
 		break;
+	case EP_STATE_CONNECT_START:
 	case EP_STATE_CONNECT_COMPL:
 	case EP_STATE_ULP_UPDATE_START:
 	case EP_STATE_ULP_UPDATE_COMPL:
@@ -1914,13 +1952,10 @@ static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
 		ret = 1;
 		break;
 	case EP_STATE_TCP_RST_RCVD:
-		ret = 0;
-		break;
-	case EP_STATE_CONNECT_FAILED:
 		if (cnic_dev_10g)
-			ret = 1;
-		else
 			ret = 0;
+		else
+			ret = 1;
 		break;
 	default:
 		ret = 0;
@@ -1953,7 +1988,8 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
 	if (!cnic)
 		return 0;
 
-	if (bnx2i_ep->state == EP_STATE_IDLE)
+	if (bnx2i_ep->state == EP_STATE_IDLE ||
+	    bnx2i_ep->state == EP_STATE_DISCONN_TIMEDOUT)
 		return 0;
 
 	if (!bnx2i_ep_tcp_conn_active(bnx2i_ep))
@@ -1979,9 +2015,10 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
 			if (session->state == ISCSI_STATE_LOGGING_OUT) {
 				if (bnx2i_ep->state == EP_STATE_LOGOUT_SENT) {
 					/* Logout sent, but no resp */
-					printk(KERN_ALERT "bnx2i - WARNING "
-						"logout response was not "
-						"received!\n");
+					printk(KERN_ALERT "bnx2i (%s): WARNING"
+						" logout response was not "
+						"received!\n",
+						bnx2i_ep->hba->netdev->name);
 				} else if (bnx2i_ep->state ==
 					   EP_STATE_LOGOUT_RESP_RCVD)
 					close = 1;
@@ -1999,9 +2036,8 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
 	else
 		close_ret = cnic->cm_abort(bnx2i_ep->cm_sk);
 
-	/* No longer allow CFC delete if cm_close/abort fails the request */
 	if (close_ret)
-		printk(KERN_ALERT "bnx2i: %s close/abort(%d) returned %d\n",
+		printk(KERN_ALERT "bnx2i (%s): close/abort(%d) returned %d\n",
 			bnx2i_ep->hba->netdev->name, close, close_ret);
 	else
 		/* wait for option-2 conn teardown */
@@ -2015,7 +2051,7 @@ int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep)
 destroy_conn:
 	bnx2i_ep_active_list_del(hba, bnx2i_ep);
 	if (bnx2i_tear_down_conn(hba, bnx2i_ep))
-		ret = -EINVAL;
+		return -EINVAL;
 out:
 	bnx2i_ep->state = EP_STATE_IDLE;
 	return ret;
@@ -2054,14 +2090,17 @@ static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
 
 	mutex_lock(&hba->net_dev_lock);
 
-	if (bnx2i_ep->state == EP_STATE_IDLE)
-		goto return_bnx2i_ep;
+	if (bnx2i_ep->state == EP_STATE_DISCONN_TIMEDOUT)
+		goto out;
 
-	if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state))
+	if (bnx2i_ep->state == EP_STATE_IDLE)
 		goto free_resc;
 
-	if (bnx2i_ep->hba_age != hba->age)
+	if (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) ||
+	    (bnx2i_ep->hba_age != hba->age)) {
+		bnx2i_ep_active_list_del(hba, bnx2i_ep);
 		goto free_resc;
+	}
 
 	/* Do all chip cleanup here */
 	if (bnx2i_hw_ep_disconnect(bnx2i_ep)) {
@@ -2070,14 +2109,13 @@ static void bnx2i_ep_disconnect(struct iscsi_endpoint *ep)
 	}
 free_resc:
 	bnx2i_free_qp_resc(hba, bnx2i_ep);
-return_bnx2i_ep:
+
 	if (bnx2i_conn)
 		bnx2i_conn->ep = NULL;
 
 	bnx2i_free_ep(ep);
+out:
 	mutex_unlock(&hba->net_dev_lock);
-	if (!hba->ofld_conns_active)
-		bnx2i_unreg_dev_all();
 
 	wake_up_interruptible(&hba->eh_wait);
 }
diff --git a/drivers/scsi/bnx2i/bnx2i_sysfs.c b/drivers/scsi/bnx2i/bnx2i_sysfs.c
index 96426b751eb..9174196d903 100644
--- a/drivers/scsi/bnx2i/bnx2i_sysfs.c
+++ b/drivers/scsi/bnx2i/bnx2i_sysfs.c
@@ -1,12 +1,13 @@
 /* bnx2i_sysfs.c: Broadcom NetXtreme II iSCSI driver.
  *
- * Copyright (c) 2004 - 2009 Broadcom Corporation
+ * Copyright (c) 2004 - 2010 Broadcom Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation.
  *
  * Written by: Anil Veerabhadrappa (anilgv@broadcom.com)
+ * Maintained by: Eddie Wai (eddie.wai@broadcom.com)
  */
 
 #include "bnx2i.h"
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index be5661707df..d2ad3d67672 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -825,7 +825,7 @@ unsigned int cxgbi_sock_select_mss(struct cxgbi_sock *csk, unsigned int pmtu)
 	unsigned int idx;
 	struct dst_entry *dst = csk->dst;
 
-	csk->advmss = dst_metric(dst, RTAX_ADVMSS);
+	csk->advmss = dst_metric_advmss(dst);
 
 	if (csk->advmss > pmtu - 40)
 		csk->advmss = pmtu - 40;
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index 54f50b07dac..8f1b5c8bf90 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -1080,7 +1080,7 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
  *        and is expected to be held on return.
  *
  **/
-static int dc395x_queue_command(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int dc395x_queue_command_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct DeviceCtlBlk *dcb;
 	struct ScsiReqBlk *srb;
@@ -1154,6 +1154,7 @@ complete:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(dc395x_queue_command)
 
 /*
  * Return the disk geometry for the given SCSI device.
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index 6fae3d285ae..b837c5b3c8f 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -442,12 +442,19 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data)
 	sdev = q->queuedata;
 	if (sdev && sdev->scsi_dh_data)
 		scsi_dh = sdev->scsi_dh_data->scsi_dh;
-	if (!scsi_dh || !get_device(&sdev->sdev_gendev))
+	if (!scsi_dh || !get_device(&sdev->sdev_gendev) ||
+	    sdev->sdev_state == SDEV_CANCEL ||
+	    sdev->sdev_state == SDEV_DEL)
 		err = SCSI_DH_NOSYS;
+	if (sdev->sdev_state == SDEV_OFFLINE)
+		err = SCSI_DH_DEV_OFFLINED;
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
-	if (err)
+	if (err) {
+		if (fn)
+			fn(data, err);
 		return err;
+	}
 
 	if (scsi_dh->activate)
 		err = scsi_dh->activate(sdev, fn, data);
diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 23dec006338..cffcb108ac9 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -423,7 +423,7 @@ static int adpt_slave_configure(struct scsi_device * device)
 	return 0;
 }
 
-static int adpt_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
+static int adpt_queue_lck(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
 {
 	adpt_hba* pHba = NULL;
 	struct adpt_device* pDev = NULL;	/* dpt per device information */
@@ -491,6 +491,8 @@ static int adpt_queue(struct scsi_cmnd * cmd, void (*done) (struct scsi_cmnd *))
 	return adpt_scsi_to_i2o(pHba, cmd, pDev);
 }
 
+static DEF_SCSI_QCMD(adpt_queue)
+
 static int adpt_bios_param(struct scsi_device *sdev, struct block_device *dev,
 		sector_t capacity, int geom[])
 {
diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h
index 337746d4604..beded716f93 100644
--- a/drivers/scsi/dpti.h
+++ b/drivers/scsi/dpti.h
@@ -29,7 +29,7 @@
  */
 
 static int adpt_detect(struct scsi_host_template * sht);
-static int adpt_queue(struct scsi_cmnd * cmd, void (*cmdcomplete) (struct scsi_cmnd *));
+static int adpt_queue(struct Scsi_Host *h, struct scsi_cmnd * cmd);
 static int adpt_abort(struct scsi_cmnd * cmd);
 static int adpt_reset(struct scsi_cmnd* cmd);
 static int adpt_release(struct Scsi_Host *host);
diff --git a/drivers/scsi/dtc.h b/drivers/scsi/dtc.h
index 0b205f8c732..cdc621204b6 100644
--- a/drivers/scsi/dtc.h
+++ b/drivers/scsi/dtc.h
@@ -36,7 +36,7 @@ static int dtc_abort(Scsi_Cmnd *);
 static int dtc_biosparam(struct scsi_device *, struct block_device *,
 		         sector_t, int*);
 static int dtc_detect(struct scsi_host_template *);
-static int dtc_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int dtc_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int dtc_bus_reset(Scsi_Cmnd *);
 
 #ifndef CMD_PER_LUN
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index d1c31378f6d..53925ac178f 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -505,8 +505,7 @@
 
 static int eata2x_detect(struct scsi_host_template *);
 static int eata2x_release(struct Scsi_Host *);
-static int eata2x_queuecommand(struct scsi_cmnd *,
-			       void (*done) (struct scsi_cmnd *));
+static int eata2x_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int eata2x_eh_abort(struct scsi_cmnd *);
 static int eata2x_eh_host_reset(struct scsi_cmnd *);
 static int eata2x_bios_param(struct scsi_device *, struct block_device *,
@@ -1758,7 +1757,7 @@ static void scsi_to_dev_dir(unsigned int i, struct hostdata *ha)
 
 }
 
-static int eata2x_queuecommand(struct scsi_cmnd *SCpnt,
+static int eata2x_queuecommand_lck(struct scsi_cmnd *SCpnt,
 			       void (*done) (struct scsi_cmnd *))
 {
 	struct Scsi_Host *shost = SCpnt->device->host;
@@ -1843,6 +1842,8 @@ static int eata2x_queuecommand(struct scsi_cmnd *SCpnt,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(eata2x_queuecommand)
+
 static int eata2x_eh_abort(struct scsi_cmnd *SCarg)
 {
 	struct Scsi_Host *shost = SCarg->device->host;
diff --git a/drivers/scsi/eata_pio.c b/drivers/scsi/eata_pio.c
index 60886c19065..4a9641e69f5 100644
--- a/drivers/scsi/eata_pio.c
+++ b/drivers/scsi/eata_pio.c
@@ -335,7 +335,7 @@ static inline unsigned int eata_pio_send_command(unsigned long base, unsigned ch
 	return 0;
 }
 
-static int eata_pio_queue(struct scsi_cmnd *cmd,
+static int eata_pio_queue_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	unsigned int x, y;
@@ -438,6 +438,8 @@ static int eata_pio_queue(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(eata_pio_queue)
+
 static int eata_pio_abort(struct scsi_cmnd *cmd)
 {
 	unsigned int loop = 100;
diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index e2bc779f86c..57558523c1b 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -916,7 +916,7 @@ static void esp_event_queue_full(struct esp *esp, struct esp_cmd_entry *ent)
 	scsi_track_queue_full(dev, lp->num_tagged - 1);
 }
 
-static int esp_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int esp_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct scsi_device *dev = cmd->device;
 	struct esp *esp = shost_priv(dev->host);
@@ -941,6 +941,8 @@ static int esp_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd
 	return 0;
 }
 
+static DEF_SCSI_QCMD(esp_queuecommand)
+
 static int esp_check_gross_error(struct esp *esp)
 {
 	if (esp->sreg & ESP_STAT_SPAM) {
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index d23a538a9df..9f9600b6700 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -854,7 +854,6 @@ static void fcoe_if_destroy(struct fc_lport *lport)
 
 	/* Cleanup the fc_lport */
 	fc_lport_destroy(lport);
-	fc_fcp_destroy(lport);
 
 	/* Stop the transmit retry timer */
 	del_timer_sync(&port->timer);
@@ -876,6 +875,9 @@ static void fcoe_if_destroy(struct fc_lport *lport)
 	fc_remove_host(lport->host);
 	scsi_remove_host(lport->host);
 
+	/* Destroy lport scsi_priv */
+	fc_fcp_destroy(lport);
+
 	/* There are no more rports or I/O, free the EM */
 	fc_exch_mgr_free(lport);
 
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index bc17c712320..625c6be2539 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -54,6 +54,7 @@ MODULE_LICENSE("GPL v2");
 static void fcoe_ctlr_timeout(unsigned long);
 static void fcoe_ctlr_timer_work(struct work_struct *);
 static void fcoe_ctlr_recv_work(struct work_struct *);
+static int fcoe_ctlr_flogi_retry(struct fcoe_ctlr *);
 
 static void fcoe_ctlr_vn_start(struct fcoe_ctlr *);
 static int fcoe_ctlr_vn_recv(struct fcoe_ctlr *, struct sk_buff *);
@@ -176,6 +177,7 @@ void fcoe_ctlr_init(struct fcoe_ctlr *fip, enum fip_state mode)
 	fip->mode = mode;
 	INIT_LIST_HEAD(&fip->fcfs);
 	mutex_init(&fip->ctlr_mutex);
+	spin_lock_init(&fip->ctlr_lock);
 	fip->flogi_oxid = FC_XID_UNKNOWN;
 	setup_timer(&fip->timer, fcoe_ctlr_timeout, (unsigned long)fip);
 	INIT_WORK(&fip->timer_work, fcoe_ctlr_timer_work);
@@ -231,6 +233,49 @@ void fcoe_ctlr_destroy(struct fcoe_ctlr *fip)
 EXPORT_SYMBOL(fcoe_ctlr_destroy);
 
 /**
+ * fcoe_ctlr_announce() - announce new FCF selection
+ * @fip: The FCoE controller
+ *
+ * Also sets the destination MAC for FCoE and control packets
+ *
+ * Called with neither ctlr_mutex nor ctlr_lock held.
+ */
+static void fcoe_ctlr_announce(struct fcoe_ctlr *fip)
+{
+	struct fcoe_fcf *sel;
+	struct fcoe_fcf *fcf;
+
+	mutex_lock(&fip->ctlr_mutex);
+	spin_lock_bh(&fip->ctlr_lock);
+
+	kfree_skb(fip->flogi_req);
+	fip->flogi_req = NULL;
+	list_for_each_entry(fcf, &fip->fcfs, list)
+		fcf->flogi_sent = 0;
+
+	spin_unlock_bh(&fip->ctlr_lock);
+	sel = fip->sel_fcf;
+
+	if (sel && !compare_ether_addr(sel->fcf_mac, fip->dest_addr))
+		goto unlock;
+	if (!is_zero_ether_addr(fip->dest_addr)) {
+		printk(KERN_NOTICE "libfcoe: host%d: "
+		       "FIP Fibre-Channel Forwarder MAC %pM deselected\n",
+		       fip->lp->host->host_no, fip->dest_addr);
+		memset(fip->dest_addr, 0, ETH_ALEN);
+	}
+	if (sel) {
+		printk(KERN_INFO "libfcoe: host%d: FIP selected "
+		       "Fibre-Channel Forwarder MAC %pM\n",
+		       fip->lp->host->host_no, sel->fcf_mac);
+		memcpy(fip->dest_addr, sel->fcf_mac, ETH_ALEN);
+		fip->map_dest = 0;
+	}
+unlock:
+	mutex_unlock(&fip->ctlr_mutex);
+}
+
+/**
  * fcoe_ctlr_fcoe_size() - Return the maximum FCoE size required for VN_Port
  * @fip: The FCoE controller to get the maximum FCoE size from
  *
@@ -564,6 +609,9 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
  * The caller must check that the length is a multiple of 4.
  * The SKB must have enough headroom (28 bytes) and tailroom (8 bytes).
  * The the skb must also be an fc_frame.
+ *
+ * This is called from the lower-level driver with spinlocks held,
+ * so we must not take a mutex here.
  */
 int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct fc_lport *lport,
 		       struct sk_buff *skb)
@@ -601,7 +649,15 @@ int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct fc_lport *lport,
 	switch (op) {
 	case ELS_FLOGI:
 		op = FIP_DT_FLOGI;
-		break;
+		if (fip->mode == FIP_MODE_VN2VN)
+			break;
+		spin_lock_bh(&fip->ctlr_lock);
+		kfree_skb(fip->flogi_req);
+		fip->flogi_req = skb;
+		fip->flogi_req_send = 1;
+		spin_unlock_bh(&fip->ctlr_lock);
+		schedule_work(&fip->timer_work);
+		return -EINPROGRESS;
 	case ELS_FDISC:
 		if (ntoh24(fh->fh_s_id))
 			return 0;
@@ -922,11 +978,9 @@ static void fcoe_ctlr_recv_adv(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	}
 	mtu_valid = fcoe_ctlr_mtu_valid(fcf);
 	fcf->time = jiffies;
-	if (!found) {
-		LIBFCOE_FIP_DBG(fip, "New FCF for fab %16.16llx "
-				"map %x val %d\n",
-				fcf->fabric_name, fcf->fc_map, mtu_valid);
-	}
+	if (!found)
+		LIBFCOE_FIP_DBG(fip, "New FCF fab %16.16llx mac %pM\n",
+				fcf->fabric_name, fcf->fcf_mac);
 
 	/*
 	 * If this advertisement is not solicited and our max receive size
@@ -945,6 +999,17 @@ static void fcoe_ctlr_recv_adv(struct fcoe_ctlr *fip, struct sk_buff *skb)
 		fcoe_ctlr_solicit(fip, NULL);
 
 	/*
+	 * Put this FCF at the head of the list for priority among equals.
+	 * This helps in the case of an NPV switch which insists we use
+	 * the FCF that answers multicast solicitations, not the others that
+	 * are sending periodic multicast advertisements.
+	 */
+	if (mtu_valid) {
+		list_del(&fcf->list);
+		list_add(&fcf->list, &fip->fcfs);
+	}
+
+	/*
 	 * If this is the first validated FCF, note the time and
 	 * set a timer to trigger selection.
 	 */
@@ -1061,18 +1126,24 @@ static void fcoe_ctlr_recv_els(struct fcoe_ctlr *fip, struct sk_buff *skb)
 	els_op = *(u8 *)(fh + 1);
 
 	if ((els_dtype == FIP_DT_FLOGI || els_dtype == FIP_DT_FDISC) &&
-	    sub == FIP_SC_REP && els_op == ELS_LS_ACC &&
-	    fip->mode != FIP_MODE_VN2VN) {
-		if (!is_valid_ether_addr(granted_mac)) {
-			LIBFCOE_FIP_DBG(fip,
-				"Invalid MAC address %pM in FIP ELS\n",
-				granted_mac);
-			goto drop;
-		}
-		memcpy(fr_cb(fp)->granted_mac, granted_mac, ETH_ALEN);
+	    sub == FIP_SC_REP && fip->mode != FIP_MODE_VN2VN) {
+		if (els_op == ELS_LS_ACC) {
+			if (!is_valid_ether_addr(granted_mac)) {
+				LIBFCOE_FIP_DBG(fip,
+					"Invalid MAC address %pM in FIP ELS\n",
+					granted_mac);
+				goto drop;
+			}
+			memcpy(fr_cb(fp)->granted_mac, granted_mac, ETH_ALEN);
 
-		if (fip->flogi_oxid == ntohs(fh->fh_ox_id))
-			fip->flogi_oxid = FC_XID_UNKNOWN;
+			if (fip->flogi_oxid == ntohs(fh->fh_ox_id)) {
+				fip->flogi_oxid = FC_XID_UNKNOWN;
+				if (els_dtype == FIP_DT_FLOGI)
+					fcoe_ctlr_announce(fip);
+			}
+		} else if (els_dtype == FIP_DT_FLOGI &&
+			   !fcoe_ctlr_flogi_retry(fip))
+			goto drop;	/* retrying FLOGI so drop reject */
 	}
 
 	if ((desc_cnt == 0) || ((els_op != ELS_LS_RJT) &&
@@ -1326,20 +1397,39 @@ drop:
  * fcoe_ctlr_select() - Select the best FCF (if possible)
  * @fip: The FCoE controller
  *
+ * Returns the selected FCF, or NULL if none are usable.
+ *
  * If there are conflicting advertisements, no FCF can be chosen.
  *
+ * If there is already a selected FCF, this will choose a better one or
+ * an equivalent one that hasn't already been sent a FLOGI.
+ *
  * Called with lock held.
  */
-static void fcoe_ctlr_select(struct fcoe_ctlr *fip)
+static struct fcoe_fcf *fcoe_ctlr_select(struct fcoe_ctlr *fip)
 {
 	struct fcoe_fcf *fcf;
-	struct fcoe_fcf *best = NULL;
+	struct fcoe_fcf *best = fip->sel_fcf;
+	struct fcoe_fcf *first;
+
+	first = list_first_entry(&fip->fcfs, struct fcoe_fcf, list);
 
 	list_for_each_entry(fcf, &fip->fcfs, list) {
-		LIBFCOE_FIP_DBG(fip, "consider FCF for fab %16.16llx "
-				"VFID %d map %x val %d\n",
-				fcf->fabric_name, fcf->vfid,
-				fcf->fc_map, fcoe_ctlr_mtu_valid(fcf));
+		LIBFCOE_FIP_DBG(fip, "consider FCF fab %16.16llx "
+				"VFID %d mac %pM map %x val %d "
+				"sent %u pri %u\n",
+				fcf->fabric_name, fcf->vfid, fcf->fcf_mac,
+				fcf->fc_map, fcoe_ctlr_mtu_valid(fcf),
+				fcf->flogi_sent, fcf->pri);
+		if (fcf->fabric_name != first->fabric_name ||
+		    fcf->vfid != first->vfid ||
+		    fcf->fc_map != first->fc_map) {
+			LIBFCOE_FIP_DBG(fip, "Conflicting fabric, VFID, "
+					"or FC-MAP\n");
+			return NULL;
+		}
+		if (fcf->flogi_sent)
+			continue;
 		if (!fcoe_ctlr_fcf_usable(fcf)) {
 			LIBFCOE_FIP_DBG(fip, "FCF for fab %16.16llx "
 					"map %x %svalid %savailable\n",
@@ -1349,21 +1439,131 @@ static void fcoe_ctlr_select(struct fcoe_ctlr *fip)
 					"" : "un");
 			continue;
 		}
-		if (!best) {
-			best = fcf;
-			continue;
-		}
-		if (fcf->fabric_name != best->fabric_name ||
-		    fcf->vfid != best->vfid ||
-		    fcf->fc_map != best->fc_map) {
-			LIBFCOE_FIP_DBG(fip, "Conflicting fabric, VFID, "
-					"or FC-MAP\n");
-			return;
-		}
-		if (fcf->pri < best->pri)
+		if (!best || fcf->pri < best->pri || best->flogi_sent)
 			best = fcf;
 	}
 	fip->sel_fcf = best;
+	if (best) {
+		LIBFCOE_FIP_DBG(fip, "using FCF mac %pM\n", best->fcf_mac);
+		fip->port_ka_time = jiffies +
+			msecs_to_jiffies(FIP_VN_KA_PERIOD);
+		fip->ctlr_ka_time = jiffies + best->fka_period;
+		if (time_before(fip->ctlr_ka_time, fip->timer.expires))
+			mod_timer(&fip->timer, fip->ctlr_ka_time);
+	}
+	return best;
+}
+
+/**
+ * fcoe_ctlr_flogi_send_locked() - send FIP-encapsulated FLOGI to current FCF
+ * @fip: The FCoE controller
+ *
+ * Returns non-zero error if it could not be sent.
+ *
+ * Called with ctlr_mutex and ctlr_lock held.
+ * Caller must verify that fip->sel_fcf is not NULL.
+ */
+static int fcoe_ctlr_flogi_send_locked(struct fcoe_ctlr *fip)
+{
+	struct sk_buff *skb;
+	struct sk_buff *skb_orig;
+	struct fc_frame_header *fh;
+	int error;
+
+	skb_orig = fip->flogi_req;
+	if (!skb_orig)
+		return -EINVAL;
+
+	/*
+	 * Clone and send the FLOGI request.  If clone fails, use original.
+	 */
+	skb = skb_clone(skb_orig, GFP_ATOMIC);
+	if (!skb) {
+		skb = skb_orig;
+		fip->flogi_req = NULL;
+	}
+	fh = (struct fc_frame_header *)skb->data;
+	error = fcoe_ctlr_encaps(fip, fip->lp, FIP_DT_FLOGI, skb,
+				 ntoh24(fh->fh_d_id));
+	if (error) {
+		kfree_skb(skb);
+		return error;
+	}
+	fip->send(fip, skb);
+	fip->sel_fcf->flogi_sent = 1;
+	return 0;
+}
+
+/**
+ * fcoe_ctlr_flogi_retry() - resend FLOGI request to a new FCF if possible
+ * @fip: The FCoE controller
+ *
+ * Returns non-zero error code if there's no FLOGI request to retry or
+ * no alternate FCF available.
+ */
+static int fcoe_ctlr_flogi_retry(struct fcoe_ctlr *fip)
+{
+	struct fcoe_fcf *fcf;
+	int error;
+
+	mutex_lock(&fip->ctlr_mutex);
+	spin_lock_bh(&fip->ctlr_lock);
+	LIBFCOE_FIP_DBG(fip, "re-sending FLOGI - reselect\n");
+	fcf = fcoe_ctlr_select(fip);
+	if (!fcf || fcf->flogi_sent) {
+		kfree_skb(fip->flogi_req);
+		fip->flogi_req = NULL;
+		error = -ENOENT;
+	} else {
+		fcoe_ctlr_solicit(fip, NULL);
+		error = fcoe_ctlr_flogi_send_locked(fip);
+	}
+	spin_unlock_bh(&fip->ctlr_lock);
+	mutex_unlock(&fip->ctlr_mutex);
+	return error;
+}
+
+
+/**
+ * fcoe_ctlr_flogi_send() - Handle sending of FIP FLOGI.
+ * @fip: The FCoE controller that timed out
+ *
+ * Done here because fcoe_ctlr_els_send() can't get mutex.
+ *
+ * Called with ctlr_mutex held.  The caller must not hold ctlr_lock.
+ */
+static void fcoe_ctlr_flogi_send(struct fcoe_ctlr *fip)
+{
+	struct fcoe_fcf *fcf;
+
+	spin_lock_bh(&fip->ctlr_lock);
+	fcf = fip->sel_fcf;
+	if (!fcf || !fip->flogi_req_send)
+		goto unlock;
+
+	LIBFCOE_FIP_DBG(fip, "sending FLOGI\n");
+
+	/*
+	 * If this FLOGI is being sent due to a timeout retry
+	 * to the same FCF as before, select a different FCF if possible.
+	 */
+	if (fcf->flogi_sent) {
+		LIBFCOE_FIP_DBG(fip, "sending FLOGI - reselect\n");
+		fcf = fcoe_ctlr_select(fip);
+		if (!fcf || fcf->flogi_sent) {
+			LIBFCOE_FIP_DBG(fip, "sending FLOGI - clearing\n");
+			list_for_each_entry(fcf, &fip->fcfs, list)
+				fcf->flogi_sent = 0;
+			fcf = fcoe_ctlr_select(fip);
+		}
+	}
+	if (fcf) {
+		fcoe_ctlr_flogi_send_locked(fip);
+		fip->flogi_req_send = 0;
+	} else /* XXX */
+		LIBFCOE_FIP_DBG(fip, "No FCF selected - defer send\n");
+unlock:
+	spin_unlock_bh(&fip->ctlr_lock);
 }
 
 /**
@@ -1411,34 +1611,16 @@ static void fcoe_ctlr_timer_work(struct work_struct *work)
 	sel = fip->sel_fcf;
 	if (!sel && fip->sel_time) {
 		if (time_after_eq(jiffies, fip->sel_time)) {
-			fcoe_ctlr_select(fip);
-			sel = fip->sel_fcf;
+			sel = fcoe_ctlr_select(fip);
 			fip->sel_time = 0;
 		} else if (time_after(next_timer, fip->sel_time))
 			next_timer = fip->sel_time;
 	}
 
-	if (sel != fcf) {
-		fcf = sel;		/* the old FCF may have been freed */
-		if (sel) {
-			printk(KERN_INFO "libfcoe: host%d: FIP selected "
-			       "Fibre-Channel Forwarder MAC %pM\n",
-			       fip->lp->host->host_no, sel->fcf_mac);
-			memcpy(fip->dest_addr, sel->fcf_mac, ETH_ALEN);
-			fip->map_dest = 0;
-			fip->port_ka_time = jiffies +
-				msecs_to_jiffies(FIP_VN_KA_PERIOD);
-			fip->ctlr_ka_time = jiffies + sel->fka_period;
-			if (time_after(next_timer, fip->ctlr_ka_time))
-				next_timer = fip->ctlr_ka_time;
-		} else {
-			printk(KERN_NOTICE "libfcoe: host%d: "
-			       "FIP Fibre-Channel Forwarder timed out.	"
-			       "Starting FCF discovery.\n",
-			       fip->lp->host->host_no);
-			reset = 1;
-		}
-	}
+	if (sel && fip->flogi_req_send)
+		fcoe_ctlr_flogi_send(fip);
+	else if (!sel && fcf)
+		reset = 1;
 
 	if (sel && !sel->fd_flags) {
 		if (time_after_eq(jiffies, fip->ctlr_ka_time)) {
@@ -2475,7 +2657,7 @@ static void fcoe_ctlr_vn_timeout(struct fcoe_ctlr *fip)
 	case FIP_ST_LINK_WAIT:
 		goto unlock;
 	default:
-		WARN(1, "unexpected state %d", fip->state);
+		WARN(1, "unexpected state %d\n", fip->state);
 		goto unlock;
 	}
 	mod_timer(&fip->timer, next_time);
diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c
index 2ad95aa8f58..a2c6135d337 100644
--- a/drivers/scsi/fd_mcs.c
+++ b/drivers/scsi/fd_mcs.c
@@ -1072,7 +1072,7 @@ static int fd_mcs_release(struct Scsi_Host *shpnt)
 	return 0;
 }
 
-static int fd_mcs_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
+static int fd_mcs_queue_lck(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 {
 	struct Scsi_Host *shpnt = SCpnt->device->host;
 
@@ -1122,6 +1122,8 @@ static int fd_mcs_queue(Scsi_Cmnd * SCpnt, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(fd_mcs_queue)
+
 #if DEBUG_ABORT || DEBUG_RESET
 static void fd_mcs_print_info(Scsi_Cmnd * SCpnt)
 {
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index e296bcc57d5..69b7aa54f43 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -1419,7 +1419,7 @@ static irqreturn_t do_fdomain_16x0_intr(int irq, void *dev_id)
    return IRQ_HANDLED;
 }
 
-static int fdomain_16x0_queue(struct scsi_cmnd *SCpnt,
+static int fdomain_16x0_queue_lck(struct scsi_cmnd *SCpnt,
 		void (*done)(struct scsi_cmnd *))
 {
    if (in_command) {
@@ -1469,6 +1469,8 @@ static int fdomain_16x0_queue(struct scsi_cmnd *SCpnt,
    return 0;
 }
 
+static DEF_SCSI_QCMD(fdomain_16x0_queue)
+
 #if DEBUG_ABORT
 static void print_info(struct scsi_cmnd *SCpnt)
 {
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index cbb20b13b22..92f185081e6 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -246,7 +246,7 @@ void fnic_set_port_id(struct fc_lport *, u32, struct fc_frame *);
 void fnic_update_mac(struct fc_lport *, u8 *new);
 void fnic_update_mac_locked(struct fnic *, u8 *new);
 
-int fnic_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+int fnic_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 int fnic_abort_cmd(struct scsi_cmnd *);
 int fnic_device_reset(struct scsi_cmnd *);
 int fnic_host_reset(struct scsi_cmnd *);
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 198cbab3e89..22d02404d15 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -349,7 +349,7 @@ static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
  * Routine to send a scsi cdb
  * Called with host_lock held and interrupts disabled.
  */
-int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+static int fnic_queuecommand_lck(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
 	struct fc_lport *lp;
 	struct fc_rport *rport;
@@ -457,6 +457,8 @@ out:
 	return ret;
 }
 
+DEF_SCSI_QCMD(fnic_queuecommand)
+
 /*
  * fnic_fcpio_fw_reset_cmpl_handler
  * Routine to handle fw reset completion
diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h
index 921764c9ab2..1bcdb7beb77 100644
--- a/drivers/scsi/g_NCR5380.h
+++ b/drivers/scsi/g_NCR5380.h
@@ -46,7 +46,7 @@
 static int generic_NCR5380_abort(Scsi_Cmnd *);
 static int generic_NCR5380_detect(struct scsi_host_template *);
 static int generic_NCR5380_release_resources(struct Scsi_Host *);
-static int generic_NCR5380_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int generic_NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int generic_NCR5380_bus_reset(Scsi_Cmnd *);
 static const char* generic_NCR5380_info(struct Scsi_Host *);
 
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 841101846b8..3242bcabad9 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -185,7 +185,7 @@ static long gdth_unlocked_ioctl(struct file *filep, unsigned int cmd,
 			        unsigned long arg);
 
 static void gdth_flush(gdth_ha_str *ha);
-static int gdth_queuecommand(Scsi_Cmnd *scp,void (*done)(Scsi_Cmnd *));
+static int gdth_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static int __gdth_queuecommand(gdth_ha_str *ha, struct scsi_cmnd *scp,
 				struct gdth_cmndinfo *cmndinfo);
 static void gdth_scsi_done(struct scsi_cmnd *scp);
@@ -4004,7 +4004,7 @@ static int gdth_bios_param(struct scsi_device *sdev,struct block_device *bdev,se
 }
 
 
-static int gdth_queuecommand(struct scsi_cmnd *scp,
+static int gdth_queuecommand_lck(struct scsi_cmnd *scp,
 				void (*done)(struct scsi_cmnd *))
 {
     gdth_ha_str *ha = shost_priv(scp->device->host);
@@ -4022,6 +4022,8 @@ static int gdth_queuecommand(struct scsi_cmnd *scp,
     return __gdth_queuecommand(ha, scp, cmndinfo);
 }
 
+static DEF_SCSI_QCMD(gdth_queuecommand)
+
 static int __gdth_queuecommand(gdth_ha_str *ha, struct scsi_cmnd *scp,
 				struct gdth_cmndinfo *cmndinfo)
 {
@@ -4271,8 +4273,10 @@ static int ioc_general(void __user *arg, char *cmnd)
     }
 
     rval = __gdth_execute(ha->sdev, &gen.command, cmnd, gen.timeout, &gen.info);
-    if (rval < 0)
+    if (rval < 0) {
+	gdth_ioctl_free(ha, gen.data_len+gen.sense_len, buf, paddr);
         return rval;
+    }
     gen.status = rval;
 
     if (copy_to_user(arg + sizeof(gdth_ioctl_general), buf, 
diff --git a/drivers/scsi/gdth_proc.c b/drivers/scsi/gdth_proc.c
index 0572b9bf4bd..652754319a4 100644
--- a/drivers/scsi/gdth_proc.c
+++ b/drivers/scsi/gdth_proc.c
@@ -365,8 +365,10 @@ static int gdth_get_info(char *buffer,char **start,off_t offset,int length,
                     len = 0;
                     begin = pos;
                 }
-                if (pos > offset + length)
+		if (pos > offset + length) {
+		    gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
                     goto stop_output;
+		}
             }
         }
         gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
@@ -450,8 +452,10 @@ static int gdth_get_info(char *buffer,char **start,off_t offset,int length,
                     len = 0;
                     begin = pos;
                 }
-                if (pos > offset + length)
+		if (pos > offset + length) {
+		    gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
                     goto stop_output;
+		}
             } while (drv_no != -1);
              
             if (is_mirr) {
@@ -472,8 +476,10 @@ static int gdth_get_info(char *buffer,char **start,off_t offset,int length,
                 len = 0;
                 begin = pos;
             }
-            if (pos > offset + length)
+	    if (pos > offset + length) {
+		gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
                 goto stop_output;
+	    }
         }       
         gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
         
@@ -542,8 +548,10 @@ static int gdth_get_info(char *buffer,char **start,off_t offset,int length,
                     len = 0;
                     begin = pos;
                 }
-                if (pos > offset + length)
+		if (pos > offset + length) {
+		    gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
                     goto stop_output;
+		}
             }
         }
         gdth_ioctl_free(ha, GDTH_SCRATCH, buf, paddr);
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index c5d0606ad09..12deffccb8d 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -31,7 +31,6 @@
 #include <linux/seq_file.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
-#include <linux/smp_lock.h>
 #include <linux/compat.h>
 #include <linux/blktrace_api.h>
 #include <linux/uaccess.h>
@@ -91,11 +90,7 @@ static const struct pci_device_id hpsa_pci_device_id[] = {
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3252},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3253},
 	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3254},
-#define PCI_DEVICE_ID_HP_CISSF 0x333f
-	{PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x333F},
-	{PCI_VENDOR_ID_HP,     PCI_ANY_ID,             PCI_ANY_ID, PCI_ANY_ID,
-		PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
-	{PCI_VENDOR_ID_COMPAQ,     PCI_ANY_ID,             PCI_ANY_ID, PCI_ANY_ID,
+	{PCI_VENDOR_ID_HP,     PCI_ANY_ID,	PCI_ANY_ID, PCI_ANY_ID,
 		PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
 	{0,}
 };
@@ -114,8 +109,6 @@ static struct board_type products[] = {
 	{0x3249103C, "Smart Array P812", &SA5_access},
 	{0x324a103C, "Smart Array P712m", &SA5_access},
 	{0x324b103C, "Smart Array P711m", &SA5_access},
-	{0x3233103C, "StorageWorks P1210m", &SA5_access},
-	{0x333F103C, "StorageWorks P1210m", &SA5_access},
 	{0x3250103C, "Smart Array", &SA5_access},
 	{0x3250113C, "Smart Array", &SA5_access},
 	{0x3250123C, "Smart Array", &SA5_access},
@@ -143,8 +136,7 @@ static void fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
 	void *buff, size_t size, u8 page_code, unsigned char *scsi3addr,
 	int cmd_type);
 
-static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
-		void (*done)(struct scsi_cmnd *));
+static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static void hpsa_scan_start(struct Scsi_Host *);
 static int hpsa_scan_finished(struct Scsi_Host *sh,
 	unsigned long elapsed_time);
@@ -649,11 +641,6 @@ static void fixup_botched_add(struct ctlr_info *h,
 static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1,
 	struct hpsa_scsi_dev_t *dev2)
 {
-	if ((is_logical_dev_addr_mode(dev1->scsi3addr) ||
-		(dev1->lun != -1 && dev2->lun != -1)) &&
-		dev1->devtype != 0x0C)
-		return (memcmp(dev1, dev2, sizeof(*dev1)) == 0);
-
 	/* we compare everything except lun and target as these
 	 * are not yet assigned.  Compare parts likely
 	 * to differ first
@@ -668,12 +655,8 @@ static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1,
 		return 0;
 	if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0)
 		return 0;
-	if (memcmp(dev1->revision, dev2->revision, sizeof(dev1->revision)) != 0)
-		return 0;
 	if (dev1->devtype != dev2->devtype)
 		return 0;
-	if (dev1->raid_level != dev2->raid_level)
-		return 0;
 	if (dev1->bus != dev2->bus)
 		return 0;
 	return 1;
@@ -1485,8 +1468,6 @@ static int hpsa_update_device_info(struct ctlr_info *h,
 		sizeof(this_device->vendor));
 	memcpy(this_device->model, &inq_buff[16],
 		sizeof(this_device->model));
-	memcpy(this_device->revision, &inq_buff[32],
-		sizeof(this_device->revision));
 	memset(this_device->device_id, 0,
 		sizeof(this_device->device_id));
 	hpsa_get_device_id(h, scsi3addr, this_device->device_id,
@@ -1926,7 +1907,7 @@ sglist_finished:
 }
 
 
-static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
+static int hpsa_scsi_queue_command_lck(struct scsi_cmnd *cmd,
 	void (*done)(struct scsi_cmnd *))
 {
 	struct ctlr_info *h;
@@ -2020,6 +2001,8 @@ static int hpsa_scsi_queue_command(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(hpsa_scsi_queue_command)
+
 static void hpsa_scan_start(struct Scsi_Host *sh)
 {
 	struct ctlr_info *h = shost_to_hba(sh);
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index a203ef65cb5..19586e189f0 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -45,7 +45,6 @@ struct hpsa_scsi_dev_t {
 	unsigned char device_id[16];    /* from inquiry pg. 0x83 */
 	unsigned char vendor[8];        /* bytes 8-15 of inquiry data */
 	unsigned char model[16];        /* bytes 16-31 of inquiry data */
-	unsigned char revision[4];      /* bytes 32-35 of inquiry data */
 	unsigned char raid_level;	/* from inquiry page 0xC1 */
 };
 
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index 0729f150b33..10b65556937 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -751,7 +751,7 @@ static void hptiop_post_req_mv(struct hptiop_hba *hba,
 		MVIOP_MU_QUEUE_ADDR_HOST_BIT | size_bit, hba);
 }
 
-static int hptiop_queuecommand(struct scsi_cmnd *scp,
+static int hptiop_queuecommand_lck(struct scsi_cmnd *scp,
 				void (*done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = scp->device->host;
@@ -819,6 +819,8 @@ cmd_done:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(hptiop_queuecommand)
+
 static const char *hptiop_info(struct Scsi_Host *host)
 {
 	return driver_name_long;
diff --git a/drivers/scsi/ibmmca.c b/drivers/scsi/ibmmca.c
index 9a4b69d4f4e..67fc8ffd52e 100644
--- a/drivers/scsi/ibmmca.c
+++ b/drivers/scsi/ibmmca.c
@@ -39,7 +39,7 @@
 #include <scsi/scsi_host.h>
 
 /* Common forward declarations for all Linux-versions: */
-static int ibmmca_queuecommand (Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
+static int ibmmca_queuecommand (struct Scsi_Host *, struct scsi_cmnd *);
 static int ibmmca_abort (Scsi_Cmnd *);
 static int ibmmca_host_reset (Scsi_Cmnd *);
 static int ibmmca_biosparam (struct scsi_device *, struct block_device *, sector_t, int *);
@@ -1691,7 +1691,7 @@ static int __devexit ibmmca_remove(struct device *dev)
 }
 
 /* The following routine is the SCSI command queue for the midlevel driver */
-static int ibmmca_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int ibmmca_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 {
 	unsigned int ldn;
 	unsigned int scsi_cmd;
@@ -1996,6 +1996,8 @@ static int ibmmca_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(ibmmca_queuecommand)
+
 static int __ibmmca_abort(Scsi_Cmnd * cmd)
 {
 	/* Abort does not work, as the adapter never generates an interrupt on
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 00d08b25425..b7650613b8c 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1606,7 +1606,7 @@ static inline int ibmvfc_host_chkready(struct ibmvfc_host *vhost)
  * Returns:
  *	0 on success / other on failure
  **/
-static int ibmvfc_queuecommand(struct scsi_cmnd *cmnd,
+static int ibmvfc_queuecommand_lck(struct scsi_cmnd *cmnd,
 			       void (*done) (struct scsi_cmnd *))
 {
 	struct ibmvfc_host *vhost = shost_priv(cmnd->device->host);
@@ -1672,6 +1672,8 @@ static int ibmvfc_queuecommand(struct scsi_cmnd *cmnd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(ibmvfc_queuecommand)
+
 /**
  * ibmvfc_sync_completion - Signal that a synchronous command has completed
  * @evt:	ibmvfc event struct
@@ -2491,23 +2493,23 @@ static void ibmvfc_terminate_rport_io(struct fc_rport *rport)
 }
 
 static const struct ibmvfc_async_desc ae_desc [] = {
-	{ IBMVFC_AE_ELS_PLOGI,		"PLOGI",		IBMVFC_DEFAULT_LOG_LEVEL + 1 },
-	{ IBMVFC_AE_ELS_LOGO,		"LOGO",		IBMVFC_DEFAULT_LOG_LEVEL + 1 },
-	{ IBMVFC_AE_ELS_PRLO,		"PRLO",		IBMVFC_DEFAULT_LOG_LEVEL + 1 },
-	{ IBMVFC_AE_SCN_NPORT,		"N-Port SCN",	IBMVFC_DEFAULT_LOG_LEVEL + 1 },
-	{ IBMVFC_AE_SCN_GROUP,		"Group SCN",	IBMVFC_DEFAULT_LOG_LEVEL + 1 },
-	{ IBMVFC_AE_SCN_DOMAIN,		"Domain SCN",	IBMVFC_DEFAULT_LOG_LEVEL },
-	{ IBMVFC_AE_SCN_FABRIC,		"Fabric SCN",	IBMVFC_DEFAULT_LOG_LEVEL },
-	{ IBMVFC_AE_LINK_UP,		"Link Up",		IBMVFC_DEFAULT_LOG_LEVEL },
-	{ IBMVFC_AE_LINK_DOWN,		"Link Down",	IBMVFC_DEFAULT_LOG_LEVEL },
-	{ IBMVFC_AE_LINK_DEAD,		"Link Dead",	IBMVFC_DEFAULT_LOG_LEVEL },
-	{ IBMVFC_AE_HALT,			"Halt",		IBMVFC_DEFAULT_LOG_LEVEL },
-	{ IBMVFC_AE_RESUME,		"Resume",		IBMVFC_DEFAULT_LOG_LEVEL },
-	{ IBMVFC_AE_ADAPTER_FAILED,	"Adapter Failed",	IBMVFC_DEFAULT_LOG_LEVEL },
+	{ "PLOGI",	IBMVFC_AE_ELS_PLOGI,	IBMVFC_DEFAULT_LOG_LEVEL + 1 },
+	{ "LOGO",	IBMVFC_AE_ELS_LOGO,	IBMVFC_DEFAULT_LOG_LEVEL + 1 },
+	{ "PRLO",	IBMVFC_AE_ELS_PRLO,	IBMVFC_DEFAULT_LOG_LEVEL + 1 },
+	{ "N-Port SCN",	IBMVFC_AE_SCN_NPORT,	IBMVFC_DEFAULT_LOG_LEVEL + 1 },
+	{ "Group SCN",	IBMVFC_AE_SCN_GROUP,	IBMVFC_DEFAULT_LOG_LEVEL + 1 },
+	{ "Domain SCN",	IBMVFC_AE_SCN_DOMAIN,	IBMVFC_DEFAULT_LOG_LEVEL },
+	{ "Fabric SCN",	IBMVFC_AE_SCN_FABRIC,	IBMVFC_DEFAULT_LOG_LEVEL },
+	{ "Link Up",	IBMVFC_AE_LINK_UP,	IBMVFC_DEFAULT_LOG_LEVEL },
+	{ "Link Down",	IBMVFC_AE_LINK_DOWN,	IBMVFC_DEFAULT_LOG_LEVEL },
+	{ "Link Dead",	IBMVFC_AE_LINK_DEAD,	IBMVFC_DEFAULT_LOG_LEVEL },
+	{ "Halt",	IBMVFC_AE_HALT,		IBMVFC_DEFAULT_LOG_LEVEL },
+	{ "Resume",	IBMVFC_AE_RESUME,	IBMVFC_DEFAULT_LOG_LEVEL },
+	{ "Adapter Failed", IBMVFC_AE_ADAPTER_FAILED, IBMVFC_DEFAULT_LOG_LEVEL },
 };
 
 static const struct ibmvfc_async_desc unknown_ae = {
-	0, "Unknown async", IBMVFC_DEFAULT_LOG_LEVEL
+	"Unknown async", 0, IBMVFC_DEFAULT_LOG_LEVEL
 };
 
 /**
diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index ef663e7c9bb..834c37fc7ce 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -542,8 +542,8 @@ enum ibmvfc_async_event {
 };
 
 struct ibmvfc_async_desc {
-	enum ibmvfc_async_event ae;
 	const char *desc;
+	enum ibmvfc_async_event ae;
 	int log_level;
 };
 
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 67f78a470f5..041958453e2 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -713,7 +713,7 @@ static inline u16 lun_from_dev(struct scsi_device *dev)
  * @cmd:	struct scsi_cmnd to be executed
  * @done:	Callback function to be called when cmd is completed
 */
-static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
+static int ibmvscsi_queuecommand_lck(struct scsi_cmnd *cmnd,
 				 void (*done) (struct scsi_cmnd *))
 {
 	struct srp_cmd *srp_cmd;
@@ -766,6 +766,8 @@ static int ibmvscsi_queuecommand(struct scsi_cmnd *cmnd,
 	return ibmvscsi_send_srp_event(evt_struct, hostdata, 0);
 }
 
+static DEF_SCSI_QCMD(ibmvscsi_queuecommand)
+
 /* ------------------------------------------------------------
  * Routines for driver initialization
  */
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 4734ab0b3ff..99aa0e5699b 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -926,7 +926,7 @@ static int imm_engine(imm_struct *dev, struct scsi_cmnd *cmd)
 	return 0;
 }
 
-static int imm_queuecommand(struct scsi_cmnd *cmd,
+static int imm_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	imm_struct *dev = imm_dev(cmd->device->host);
@@ -949,6 +949,8 @@ static int imm_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(imm_queuecommand)
+
 /*
  * Apparently the disk->capacity attribute is off by 1 sector 
  * for all disk drives.  We add the one here, but it should really
diff --git a/drivers/scsi/in2000.c b/drivers/scsi/in2000.c
index 52bdc6df6b9..6568aab745a 100644
--- a/drivers/scsi/in2000.c
+++ b/drivers/scsi/in2000.c
@@ -334,7 +334,7 @@ static uchar calc_sync_xfer(unsigned int period, unsigned int offset)
 
 static void in2000_execute(struct Scsi_Host *instance);
 
-static int in2000_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int in2000_queuecommand_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 {
 	struct Scsi_Host *instance;
 	struct IN2000_hostdata *hostdata;
@@ -431,6 +431,8 @@ static int in2000_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
 	    return 0;
 }
 
+static DEF_SCSI_QCMD(in2000_queuecommand)
+
 
 
 /*
diff --git a/drivers/scsi/in2000.h b/drivers/scsi/in2000.h
index 0fb8b06b839..5821e1fbce0 100644
--- a/drivers/scsi/in2000.h
+++ b/drivers/scsi/in2000.h
@@ -396,7 +396,7 @@ struct IN2000_hostdata {
 							   flags)
 
 static int in2000_detect(struct scsi_host_template *) in2000__INIT;
-static int in2000_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int in2000_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int in2000_abort(Scsi_Cmnd *);
 static void in2000_setup(char *, int *) in2000__INIT;
 static int in2000_biosparam(struct scsi_device *, struct block_device *,
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 108797761b9..9627d062e16 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -2639,7 +2639,7 @@ static void initio_build_scb(struct initio_host * host, struct scsi_ctrl_blk * c
  *	will cause the mid layer to call us again later with the command)
  */
 
-static int i91u_queuecommand(struct scsi_cmnd *cmd,
+static int i91u_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	struct initio_host *host = (struct initio_host *) cmd->device->host->hostdata;
@@ -2656,6 +2656,8 @@ static int i91u_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(i91u_queuecommand)
+
 /**
  *	i91u_bus_reset		-	reset the SCSI bus
  *	@cmnd: Command block we want to trigger the reset for
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index fa60d7df44b..de2e09e49a3 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -146,7 +146,7 @@ static const struct ipr_chip_cfg_t ipr_chip_cfg[] = {
 		}
 	},
 	{ /* CRoC */
-		.mailbox = 0x00040,
+		.mailbox = 0x00044,
 		.cache_line_size = 0x20,
 		{
 			.set_interrupt_mask_reg = 0x00010,
@@ -1048,6 +1048,8 @@ static void ipr_init_res_entry(struct ipr_resource_entry *res,
 			sizeof(res->res_path));
 
 		res->bus = 0;
+		memcpy(&res->dev_lun.scsi_lun, &cfgtew->u.cfgte64->lun,
+			sizeof(res->dev_lun.scsi_lun));
 		res->lun = scsilun_to_int(&res->dev_lun);
 
 		if (res->type == IPR_RES_TYPE_GENERIC_SCSI) {
@@ -1063,9 +1065,6 @@ static void ipr_init_res_entry(struct ipr_resource_entry *res,
 								  ioa_cfg->max_devs_supported);
 				set_bit(res->target, ioa_cfg->target_ids);
 			}
-
-			memcpy(&res->dev_lun.scsi_lun, &cfgtew->u.cfgte64->lun,
-				sizeof(res->dev_lun.scsi_lun));
 		} else if (res->type == IPR_RES_TYPE_IOAFP) {
 			res->bus = IPR_IOAFP_VIRTUAL_BUS;
 			res->target = 0;
@@ -1116,7 +1115,7 @@ static int ipr_is_same_device(struct ipr_resource_entry *res,
 	if (res->ioa_cfg->sis64) {
 		if (!memcmp(&res->dev_id, &cfgtew->u.cfgte64->dev_id,
 					sizeof(cfgtew->u.cfgte64->dev_id)) &&
-			!memcmp(&res->lun, &cfgtew->u.cfgte64->lun,
+			!memcmp(&res->dev_lun.scsi_lun, &cfgtew->u.cfgte64->lun,
 					sizeof(cfgtew->u.cfgte64->lun))) {
 			return 1;
 		}
@@ -2901,6 +2900,12 @@ static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump)
 		return;
 	}
 
+	if (ioa_cfg->sis64) {
+		spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+		ssleep(IPR_DUMP_DELAY_SECONDS);
+		spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+	}
+
 	start_addr = readl(ioa_cfg->ioa_mailbox);
 
 	if (!ioa_cfg->sis64 && !ipr_sdt_is_fmt2(start_addr)) {
@@ -5709,7 +5714,7 @@ static void ipr_scsi_done(struct ipr_cmnd *ipr_cmd)
  *	SCSI_MLQUEUE_DEVICE_BUSY if device is busy
  *	SCSI_MLQUEUE_HOST_BUSY if host is busy
  **/
-static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
+static int ipr_queuecommand_lck(struct scsi_cmnd *scsi_cmd,
 			    void (*done) (struct scsi_cmnd *))
 {
 	struct ipr_ioa_cfg *ioa_cfg;
@@ -5792,6 +5797,8 @@ static int ipr_queuecommand(struct scsi_cmnd *scsi_cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(ipr_queuecommand)
+
 /**
  * ipr_ioctl - IOCTL handler
  * @sdev:	scsi device struct
@@ -7471,6 +7478,29 @@ static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg)
 }
 
 /**
+ * ipr_reset_get_unit_check_job - Call to get the unit check buffer.
+ * @ipr_cmd:	ipr command struct
+ *
+ * Description: This function will call to get the unit check buffer.
+ *
+ * Return value:
+ *	IPR_RC_JOB_RETURN
+ **/
+static int ipr_reset_get_unit_check_job(struct ipr_cmnd *ipr_cmd)
+{
+	struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
+
+	ENTER;
+	ioa_cfg->ioa_unit_checked = 0;
+	ipr_get_unit_check_buffer(ioa_cfg);
+	ipr_cmd->job_step = ipr_reset_alert;
+	ipr_reset_start_timer(ipr_cmd, 0);
+
+	LEAVE;
+	return IPR_RC_JOB_RETURN;
+}
+
+/**
  * ipr_reset_restore_cfg_space - Restore PCI config space.
  * @ipr_cmd:	ipr command struct
  *
@@ -7510,11 +7540,17 @@ static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd)
 	}
 
 	if (ioa_cfg->ioa_unit_checked) {
-		ioa_cfg->ioa_unit_checked = 0;
-		ipr_get_unit_check_buffer(ioa_cfg);
-		ipr_cmd->job_step = ipr_reset_alert;
-		ipr_reset_start_timer(ipr_cmd, 0);
-		return IPR_RC_JOB_RETURN;
+		if (ioa_cfg->sis64) {
+			ipr_cmd->job_step = ipr_reset_get_unit_check_job;
+			ipr_reset_start_timer(ipr_cmd, IPR_DUMP_DELAY_TIMEOUT);
+			return IPR_RC_JOB_RETURN;
+		} else {
+			ioa_cfg->ioa_unit_checked = 0;
+			ipr_get_unit_check_buffer(ioa_cfg);
+			ipr_cmd->job_step = ipr_reset_alert;
+			ipr_reset_start_timer(ipr_cmd, 0);
+			return IPR_RC_JOB_RETURN;
+		}
 	}
 
 	if (ioa_cfg->in_ioa_bringdown) {
diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h
index b28a00f1082..13f425fb885 100644
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -218,6 +218,8 @@
 #define IPR_WAIT_FOR_BIST_TIMEOUT		(2 * HZ)
 #define IPR_PCI_RESET_TIMEOUT			(HZ / 2)
 #define IPR_DUMP_TIMEOUT			(15 * HZ)
+#define IPR_DUMP_DELAY_SECONDS			4
+#define IPR_DUMP_DELAY_TIMEOUT			(IPR_DUMP_DELAY_SECONDS * HZ)
 
 /*
  * SCSI Literals
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index f83a116955f..b2511acd39b 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -232,7 +232,7 @@ static int ips_detect(struct scsi_host_template *);
 static int ips_release(struct Scsi_Host *);
 static int ips_eh_abort(struct scsi_cmnd *);
 static int ips_eh_reset(struct scsi_cmnd *);
-static int ips_queue(struct scsi_cmnd *, void (*)(struct scsi_cmnd *));
+static int ips_queue(struct Scsi_Host *, struct scsi_cmnd *);
 static const char *ips_info(struct Scsi_Host *);
 static irqreturn_t do_ipsintr(int, void *);
 static int ips_hainit(ips_ha_t *);
@@ -1046,7 +1046,7 @@ static int ips_eh_reset(struct scsi_cmnd *SC)
 /*    Linux obtains io_request_lock before calling this function            */
 /*                                                                          */
 /****************************************************************************/
-static int ips_queue(struct scsi_cmnd *SC, void (*done) (struct scsi_cmnd *))
+static int ips_queue_lck(struct scsi_cmnd *SC, void (*done) (struct scsi_cmnd *))
 {
 	ips_ha_t *ha;
 	ips_passthru_t *pt;
@@ -1137,6 +1137,8 @@ static int ips_queue(struct scsi_cmnd *SC, void (*done) (struct scsi_cmnd *))
 	return (0);
 }
 
+static DEF_SCSI_QCMD(ips_queue)
+
 /****************************************************************************/
 /*                                                                          */
 /* Routine Name: ips_biosparam                                              */
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index ec2a1aec235..d21367d3305 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -67,6 +67,11 @@ struct workqueue_struct *fc_exch_workqueue;
 struct fc_exch_pool {
 	u16		 next_index;
 	u16		 total_exches;
+
+	/* two cache of free slot in exch array */
+	u16		 left;
+	u16		 right;
+
 	spinlock_t	 lock;
 	struct list_head ex_list;
 };
@@ -108,7 +113,6 @@ struct fc_exch_mgr {
 		atomic_t non_bls_resp;
 	} stats;
 };
-#define	fc_seq_exch(sp) container_of(sp, struct fc_exch, seq)
 
 /**
  * struct fc_exch_mgr_anchor - primary structure for list of EMs
@@ -397,13 +401,23 @@ static inline void fc_exch_ptr_set(struct fc_exch_pool *pool, u16 index,
 static void fc_exch_delete(struct fc_exch *ep)
 {
 	struct fc_exch_pool *pool;
+	u16 index;
 
 	pool = ep->pool;
 	spin_lock_bh(&pool->lock);
 	WARN_ON(pool->total_exches <= 0);
 	pool->total_exches--;
-	fc_exch_ptr_set(pool, (ep->xid - ep->em->min_xid) >> fc_cpu_order,
-			NULL);
+
+	/* update cache of free slot */
+	index = (ep->xid - ep->em->min_xid) >> fc_cpu_order;
+	if (pool->left == FC_XID_UNKNOWN)
+		pool->left = index;
+	else if (pool->right == FC_XID_UNKNOWN)
+		pool->right = index;
+	else
+		pool->next_index = index;
+
+	fc_exch_ptr_set(pool, index, NULL);
 	list_del(&ep->ex_list);
 	spin_unlock_bh(&pool->lock);
 	fc_exch_release(ep);	/* drop hold for exch in mp */
@@ -636,10 +650,13 @@ static void fc_exch_timeout(struct work_struct *work)
 		if (e_stat & ESB_ST_ABNORMAL)
 			rc = fc_exch_done_locked(ep);
 		spin_unlock_bh(&ep->ex_lock);
-		if (!rc)
-			fc_exch_delete(ep);
 		if (resp)
 			resp(sp, ERR_PTR(-FC_EX_TIMEOUT), arg);
+		if (!rc) {
+			/* delete the exchange if it's already being aborted */
+			fc_exch_delete(ep);
+			return;
+		}
 		fc_seq_exch_abort(sp, 2 * ep->r_a_tov);
 		goto done;
 	}
@@ -679,6 +696,19 @@ static struct fc_exch *fc_exch_em_alloc(struct fc_lport *lport,
 	pool = per_cpu_ptr(mp->pool, cpu);
 	spin_lock_bh(&pool->lock);
 	put_cpu();
+
+	/* peek cache of free slot */
+	if (pool->left != FC_XID_UNKNOWN) {
+		index = pool->left;
+		pool->left = FC_XID_UNKNOWN;
+		goto hit;
+	}
+	if (pool->right != FC_XID_UNKNOWN) {
+		index = pool->right;
+		pool->right = FC_XID_UNKNOWN;
+		goto hit;
+	}
+
 	index = pool->next_index;
 	/* allocate new exch from pool */
 	while (fc_exch_ptr_get(pool, index)) {
@@ -687,7 +717,7 @@ static struct fc_exch *fc_exch_em_alloc(struct fc_lport *lport,
 			goto err;
 	}
 	pool->next_index = index == mp->pool_max_index ? 0 : index + 1;
-
+hit:
 	fc_exch_hold(ep);	/* hold for exch in mp */
 	spin_lock_init(&ep->ex_lock);
 	/*
@@ -1247,7 +1277,7 @@ static struct fc_seq *fc_seq_assign(struct fc_lport *lport, struct fc_frame *fp)
 
 	list_for_each_entry(ema, &lport->ema_list, ema_list)
 		if ((!ema->match || ema->match(fp)) &&
-		    fc_seq_lookup_recip(lport, ema->mp, fp) != FC_RJT_NONE)
+		    fc_seq_lookup_recip(lport, ema->mp, fp) == FC_RJT_NONE)
 			break;
 	return fr_seq(fp);
 }
@@ -1343,7 +1373,7 @@ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp)
 	}
 	if (ep->esb_stat & ESB_ST_COMPLETE) {
 		atomic_inc(&mp->stats.xid_not_found);
-		goto out;
+		goto rel;
 	}
 	if (ep->rxid == FC_XID_UNKNOWN)
 		ep->rxid = ntohs(fh->fh_rx_id);
@@ -2181,6 +2211,8 @@ struct fc_exch_mgr *fc_exch_mgr_alloc(struct fc_lport *lport,
 		goto free_mempool;
 	for_each_possible_cpu(cpu) {
 		pool = per_cpu_ptr(mp->pool, cpu);
+		pool->left = FC_XID_UNKNOWN;
+		pool->right = FC_XID_UNKNOWN;
 		spin_lock_init(&pool->lock);
 		INIT_LIST_HEAD(&pool->ex_list);
 	}
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index e340373b509..cdc06cda76e 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -57,6 +57,9 @@ struct kmem_cache *scsi_pkt_cachep;
 #define FC_SRB_READ		(1 << 1)
 #define FC_SRB_WRITE		(1 << 0)
 
+/* constant added to e_d_tov timeout to get rec_tov value */
+#define REC_TOV_CONST		1
+
 /*
  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
  */
@@ -96,7 +99,7 @@ static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
-static void fc_fcp_recovery(struct fc_fcp_pkt *);
+static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
 static void fc_fcp_timeout(unsigned long);
 static void fc_fcp_rec(struct fc_fcp_pkt *);
 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
@@ -120,14 +123,13 @@ static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
 #define FC_DATA_UNDRUN		7
 #define FC_ERROR		8
 #define FC_HRD_ERROR		9
-#define FC_CMD_RECOVERY		10
+#define FC_CRC_ERROR		10
+#define FC_TIMED_OUT		11
 
 /*
  * Error recovery timeout values.
  */
-#define FC_SCSI_ER_TIMEOUT	(10 * HZ)
 #define FC_SCSI_TM_TOV		(10 * HZ)
-#define FC_SCSI_REC_TOV		(2 * HZ)
 #define FC_HOST_RESET_TIMEOUT	(30 * HZ)
 #define FC_CAN_QUEUE_PERIOD	(60 * HZ)
 
@@ -438,6 +440,7 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 	void *buf;
 	struct scatterlist *sg;
 	u32 nents;
+	u8 host_bcode = FC_COMPLETE;
 
 	fh = fc_frame_header_get(fp);
 	offset = ntohl(fh->fh_parm_offset);
@@ -446,13 +449,16 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 	buf = fc_frame_payload_get(fp, 0);
 
 	/*
-	 * if this I/O is ddped then clear it
-	 * and initiate recovery since data
-	 * frames are expected to be placed
-	 * directly in that case.
+	 * if this I/O is ddped then clear it and initiate recovery since data
+	 * frames are expected to be placed directly in that case.
+	 *
+	 * Indicate error to scsi-ml because something went wrong with the
+	 * ddp handling to get us here.
 	 */
 	if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
 		fc_fcp_ddp_done(fsp);
+		FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
+		host_bcode = FC_ERROR;
 		goto err;
 	}
 	if (offset + len > fsp->data_len) {
@@ -462,6 +468,9 @@ static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 			goto crc_err;
 		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
 			   "data_len %x\n", len, offset, fsp->data_len);
+
+		/* Data is corrupted indicate scsi-ml should retry */
+		host_bcode = FC_DATA_OVRRUN;
 		goto err;
 	}
 	if (offset != fsp->xfer_len)
@@ -498,8 +507,10 @@ crc_err:
 			 * If so, we need to retry the entire operation.
 			 * Otherwise, ignore it.
 			 */
-			if (fsp->state & FC_SRB_DISCONTIG)
+			if (fsp->state & FC_SRB_DISCONTIG) {
+				host_bcode = FC_CRC_ERROR;
 				goto err;
+			}
 			return;
 		}
 	}
@@ -517,7 +528,7 @@ crc_err:
 		fc_fcp_complete_locked(fsp);
 	return;
 err:
-	fc_fcp_recovery(fsp);
+	fc_fcp_recovery(fsp, host_bcode);
 }
 
 /**
@@ -962,7 +973,13 @@ static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
 		}
 		lport->tt.exch_done(seq);
 	}
-	fc_io_compl(fsp);
+	/*
+	 * Some resets driven by SCSI are not I/Os and do not have
+	 * SCSI commands associated with the requests. We should not
+	 * call I/O completion if we do not have a SCSI command.
+	 */
+	if (fsp->cmd)
+		fc_io_compl(fsp);
 }
 
 /**
@@ -1073,6 +1090,21 @@ static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
 }
 
 /**
+ * get_fsp_rec_tov() - Helper function to get REC_TOV
+ * @fsp: the FCP packet
+ */
+static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
+{
+	struct fc_rport *rport;
+	struct fc_rport_libfc_priv *rpriv;
+
+	rport = fsp->rport;
+	rpriv = rport->dd_data;
+
+	return rpriv->e_d_tov + REC_TOV_CONST;
+}
+
+/**
  * fc_fcp_cmd_send() - Send a FCP command
  * @lport: The local port to send the command on
  * @fsp:   The FCP packet the command is on
@@ -1089,6 +1121,7 @@ static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
 	struct fc_rport_libfc_priv *rpriv;
 	const size_t len = sizeof(fsp->cdb_cmd);
 	int rc = 0;
+	unsigned int rec_tov;
 
 	if (fc_fcp_lock_pkt(fsp))
 		return 0;
@@ -1119,10 +1152,13 @@ static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
 	fsp->seq_ptr = seq;
 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
 
+	rec_tov = get_fsp_rec_tov(fsp);
+
 	setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
-	fc_fcp_timer_set(fsp,
-			 (fsp->tgt_flags & FC_RP_FLAGS_REC_SUPPORTED) ?
-			 FC_SCSI_REC_TOV : FC_SCSI_ER_TIMEOUT);
+
+	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
+		fc_fcp_timer_set(fsp, rec_tov);
+
 unlock:
 	fc_fcp_unlock_pkt(fsp);
 	return rc;
@@ -1197,13 +1233,16 @@ static void fc_lun_reset_send(unsigned long data)
 {
 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
 	struct fc_lport *lport = fsp->lp;
+	unsigned int rec_tov;
+
 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
 			return;
 		if (fc_fcp_lock_pkt(fsp))
 			return;
+		rec_tov = get_fsp_rec_tov(fsp);
 		setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
-		fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
+		fc_fcp_timer_set(fsp, rec_tov);
 		fc_fcp_unlock_pkt(fsp);
 	}
 }
@@ -1282,27 +1321,27 @@ static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 		 *
 		 * scsi-eh will escalate for when either happens.
 		 */
-		return;
+		goto out;
 	}
 
 	if (fc_fcp_lock_pkt(fsp))
-		return;
+		goto out;
 
 	/*
 	 * raced with eh timeout handler.
 	 */
-	if (!fsp->seq_ptr || !fsp->wait_for_comp) {
-		spin_unlock_bh(&fsp->scsi_pkt_lock);
-		return;
-	}
+	if (!fsp->seq_ptr || !fsp->wait_for_comp)
+		goto out_unlock;
 
 	fh = fc_frame_header_get(fp);
 	if (fh->fh_type != FC_TYPE_BLS)
 		fc_fcp_resp(fsp, fp);
 	fsp->seq_ptr = NULL;
 	fsp->lp->tt.exch_done(seq);
-	fc_frame_free(fp);
+out_unlock:
 	fc_fcp_unlock_pkt(fsp);
+out:
+	fc_frame_free(fp);
 }
 
 /**
@@ -1341,13 +1380,10 @@ static void fc_fcp_timeout(unsigned long data)
 
 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
 		fc_fcp_rec(fsp);
-	else if (time_after_eq(fsp->last_pkt_time + (FC_SCSI_ER_TIMEOUT / 2),
-			       jiffies))
-		fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
 	else if (fsp->state & FC_SRB_RCV_STATUS)
 		fc_fcp_complete_locked(fsp);
 	else
-		fc_fcp_recovery(fsp);
+		fc_fcp_recovery(fsp, FC_TIMED_OUT);
 	fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
 unlock:
 	fc_fcp_unlock_pkt(fsp);
@@ -1373,6 +1409,7 @@ static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
 		fc_fcp_complete_locked(fsp);
 		return;
 	}
+
 	fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
 	if (!fp)
 		goto retry;
@@ -1383,15 +1420,15 @@ static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
 		       FC_FCTL_REQ, 0);
 	if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
 				 fc_fcp_rec_resp, fsp,
-				 jiffies_to_msecs(FC_SCSI_REC_TOV))) {
+				 2 * lport->r_a_tov)) {
 		fc_fcp_pkt_hold(fsp);		/* hold while REC outstanding */
 		return;
 	}
 retry:
 	if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
-		fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
+		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
 	else
-		fc_fcp_recovery(fsp);
+		fc_fcp_recovery(fsp, FC_TIMED_OUT);
 }
 
 /**
@@ -1445,7 +1482,6 @@ static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 			 * making progress.
 			 */
 			rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
-			fc_fcp_timer_set(fsp, FC_SCSI_ER_TIMEOUT);
 			break;
 		case ELS_RJT_LOGIC:
 		case ELS_RJT_UNAB:
@@ -1460,7 +1496,7 @@ static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 				fc_fcp_retry_cmd(fsp);
 				break;
 			}
-			fc_fcp_recovery(fsp);
+			fc_fcp_recovery(fsp, FC_ERROR);
 			break;
 		}
 	} else if (opcode == ELS_LS_ACC) {
@@ -1498,12 +1534,12 @@ static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 			}
 			fc_fcp_srr(fsp, r_ctl, offset);
 		} else if (e_stat & ESB_ST_SEQ_INIT) {
-
+			unsigned int rec_tov = get_fsp_rec_tov(fsp);
 			/*
 			 * The remote port has the initiative, so just
 			 * keep waiting for it to complete.
 			 */
-			fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
+			fc_fcp_timer_set(fsp, rec_tov);
 		} else {
 
 			/*
@@ -1575,7 +1611,7 @@ static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
 			fc_fcp_rec(fsp);
 		else
-			fc_fcp_recovery(fsp);
+			fc_fcp_recovery(fsp, FC_ERROR);
 		break;
 	}
 	fc_fcp_unlock_pkt(fsp);
@@ -1587,9 +1623,9 @@ out:
  * fc_fcp_recovery() - Handler for fcp_pkt recovery
  * @fsp: The FCP pkt that needs to be aborted
  */
-static void fc_fcp_recovery(struct fc_fcp_pkt *fsp)
+static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
 {
-	fsp->status_code = FC_CMD_RECOVERY;
+	fsp->status_code = code;
 	fsp->cdb_status = 0;
 	fsp->io_status = 0;
 	/*
@@ -1616,6 +1652,7 @@ static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
 	struct fcp_srr *srr;
 	struct fc_frame *fp;
 	u8 cdb_op;
+	unsigned int rec_tov;
 
 	rport = fsp->rport;
 	rpriv = rport->dd_data;
@@ -1640,8 +1677,9 @@ static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
 		       rpriv->local_port->port_id, FC_TYPE_FCP,
 		       FC_FCTL_REQ, 0);
 
+	rec_tov = get_fsp_rec_tov(fsp);
 	seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL,
-				      fsp, jiffies_to_msecs(FC_SCSI_REC_TOV));
+				      fsp, jiffies_to_msecs(rec_tov));
 	if (!seq)
 		goto retry;
 
@@ -1665,6 +1703,7 @@ static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 {
 	struct fc_fcp_pkt *fsp = arg;
 	struct fc_frame_header *fh;
+	unsigned int rec_tov;
 
 	if (IS_ERR(fp)) {
 		fc_fcp_srr_error(fsp, fp);
@@ -1691,11 +1730,12 @@ static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 	switch (fc_frame_payload_op(fp)) {
 	case ELS_LS_ACC:
 		fsp->recov_retry = 0;
-		fc_fcp_timer_set(fsp, FC_SCSI_REC_TOV);
+		rec_tov = get_fsp_rec_tov(fsp);
+		fc_fcp_timer_set(fsp, rec_tov);
 		break;
 	case ELS_LS_RJT:
 	default:
-		fc_fcp_recovery(fsp);
+		fc_fcp_recovery(fsp, FC_ERROR);
 		break;
 	}
 	fc_fcp_unlock_pkt(fsp);
@@ -1721,7 +1761,7 @@ static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
 			fc_fcp_rec(fsp);
 		else
-			fc_fcp_recovery(fsp);
+			fc_fcp_recovery(fsp, FC_TIMED_OUT);
 		break;
 	case -FC_EX_CLOSED:			/* e.g., link failure */
 		/* fall through */
@@ -1753,7 +1793,7 @@ static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
  * This is the i/o strategy routine, called by the SCSI layer. This routine
  * is called with the host_lock held.
  */
-int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
+static int fc_queuecommand_lck(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct fc_lport *lport;
 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
@@ -1820,19 +1860,17 @@ int fc_queuecommand(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
 	if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
 		fsp->req_flags = FC_SRB_READ;
 		stats->InputRequests++;
-		stats->InputMegabytes = fsp->data_len;
+		stats->InputBytes += fsp->data_len;
 	} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
 		fsp->req_flags = FC_SRB_WRITE;
 		stats->OutputRequests++;
-		stats->OutputMegabytes = fsp->data_len;
+		stats->OutputBytes += fsp->data_len;
 	} else {
 		fsp->req_flags = 0;
 		stats->ControlRequests++;
 	}
 	put_cpu();
 
-	fsp->tgt_flags = rpriv->flags;
-
 	init_timer(&fsp->timer);
 	fsp->timer.data = (unsigned long)fsp;
 
@@ -1851,6 +1889,8 @@ out:
 	spin_lock_irq(lport->host->host_lock);
 	return rc;
 }
+
+DEF_SCSI_QCMD(fc_queuecommand)
 EXPORT_SYMBOL(fc_queuecommand);
 
 /**
@@ -1944,18 +1984,29 @@ static void fc_io_compl(struct fc_fcp_pkt *fsp)
 		break;
 	case FC_CMD_ABORTED:
 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
-			   "due to FC_CMD_ABORTED\n");
+			  "due to FC_CMD_ABORTED\n");
 		sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
 		break;
-	case FC_CMD_RECOVERY:
-		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
-		break;
 	case FC_CMD_RESET:
+		FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
+			   "due to FC_CMD_RESET\n");
 		sc_cmd->result = (DID_RESET << 16);
 		break;
 	case FC_HRD_ERROR:
+		FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
+			   "due to FC_HRD_ERROR\n");
 		sc_cmd->result = (DID_NO_CONNECT << 16);
 		break;
+	case FC_CRC_ERROR:
+		FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
+			   "due to FC_CRC_ERROR\n");
+		sc_cmd->result = (DID_PARITY << 16);
+		break;
+	case FC_TIMED_OUT:
+		FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
+			   "due to FC_TIMED_OUT\n");
+		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
+		break;
 	default:
 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
 			   "due to unknown error\n");
@@ -2002,7 +2053,7 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd)
 	fsp = CMD_SP(sc_cmd);
 	if (!fsp) {
 		/* command completed while scsi eh was setting up */
-		spin_unlock_irqrestore(lport->host->host_lock, flags);
+		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
 		return SUCCESS;
 	}
 	/* grab a ref so the fsp and sc_cmd cannot be relased from under us */
diff --git a/drivers/scsi/libfc/fc_libfc.h b/drivers/scsi/libfc/fc_libfc.h
index 16d2162dda1..eea0c3541b7 100644
--- a/drivers/scsi/libfc/fc_libfc.h
+++ b/drivers/scsi/libfc/fc_libfc.h
@@ -66,9 +66,21 @@ extern unsigned int fc_debug_logging;
 
 #define FC_FCP_DBG(pkt, fmt, args...)					\
 	FC_CHECK_LOGGING(FC_FCP_LOGGING,				\
-			 printk(KERN_INFO "host%u: fcp: %6.6x: " fmt,	\
+	{								\
+		if ((pkt)->seq_ptr) {					\
+			struct fc_exch *_ep = NULL;			\
+			_ep = fc_seq_exch((pkt)->seq_ptr);		\
+			printk(KERN_INFO "host%u: fcp: %6.6x: "		\
+				"xid %04x-%04x: " fmt,			\
 				(pkt)->lp->host->host_no,		\
-				pkt->rport->port_id, ##args))
+				(pkt)->rport->port_id,			\
+				(_ep)->oxid, (_ep)->rxid, ##args);	\
+		} else {						\
+			printk(KERN_INFO "host%u: fcp: %6.6x: " fmt,	\
+				(pkt)->lp->host->host_no,		\
+				(pkt)->rport->port_id, ##args);		\
+		}							\
+	})
 
 #define FC_EXCH_DBG(exch, fmt, args...)					\
 	FC_CHECK_LOGGING(FC_EXCH_LOGGING,				\
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 9be63edbf8f..c5a10f94f84 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -288,6 +288,8 @@ struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *shost)
 	struct fc_lport *lport = shost_priv(shost);
 	struct timespec v0, v1;
 	unsigned int cpu;
+	u64 fcp_in_bytes = 0;
+	u64 fcp_out_bytes = 0;
 
 	fcoe_stats = &lport->host_stats;
 	memset(fcoe_stats, 0, sizeof(struct fc_host_statistics));
@@ -310,10 +312,12 @@ struct fc_host_statistics *fc_get_host_stats(struct Scsi_Host *shost)
 		fcoe_stats->fcp_input_requests += stats->InputRequests;
 		fcoe_stats->fcp_output_requests += stats->OutputRequests;
 		fcoe_stats->fcp_control_requests += stats->ControlRequests;
-		fcoe_stats->fcp_input_megabytes += stats->InputMegabytes;
-		fcoe_stats->fcp_output_megabytes += stats->OutputMegabytes;
+		fcp_in_bytes += stats->InputBytes;
+		fcp_out_bytes += stats->OutputBytes;
 		fcoe_stats->link_failure_count += stats->LinkFailureCount;
 	}
+	fcoe_stats->fcp_input_megabytes = div_u64(fcp_in_bytes, 1000000);
+	fcoe_stats->fcp_output_megabytes = div_u64(fcp_out_bytes, 1000000);
 	fcoe_stats->lip_count = -1;
 	fcoe_stats->nos_count = -1;
 	fcoe_stats->loss_of_sync_count = -1;
@@ -1703,8 +1707,10 @@ static int fc_lport_els_request(struct fc_bsg_job *job,
 	info->sg = job->reply_payload.sg_list;
 
 	if (!lport->tt.exch_seq_send(lport, fp, fc_lport_bsg_resp,
-				     NULL, info, tov))
+				     NULL, info, tov)) {
+		kfree(info);
 		return -ECOMM;
+	}
 	return 0;
 }
 
@@ -1762,8 +1768,10 @@ static int fc_lport_ct_request(struct fc_bsg_job *job,
 	info->sg = job->reply_payload.sg_list;
 
 	if (!lport->tt.exch_seq_send(lport, fp, fc_lport_bsg_resp,
-				     NULL, info, tov))
+				     NULL, info, tov)) {
+		kfree(info);
 		return -ECOMM;
+	}
 	return 0;
 }
 
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index a84ef13ed74..a7175adab32 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -652,7 +652,7 @@ void fc_rport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 	FC_RPORT_DBG(rdata, "Received a FLOGI %s\n", fc_els_resp_type(fp));
 
 	if (fp == ERR_PTR(-FC_EX_CLOSED))
-		return;
+		goto put;
 
 	mutex_lock(&rdata->rp_mutex);
 
@@ -689,6 +689,7 @@ out:
 	fc_frame_free(fp);
 err:
 	mutex_unlock(&rdata->rp_mutex);
+put:
 	kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy);
 	return;
 bad:
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 633e0903635..da8b61543ee 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -505,6 +505,7 @@ static void iscsi_free_task(struct iscsi_task *task)
 	struct iscsi_conn *conn = task->conn;
 	struct iscsi_session *session = conn->session;
 	struct scsi_cmnd *sc = task->sc;
+	int oldstate = task->state;
 
 	ISCSI_DBG_SESSION(session, "freeing task itt 0x%x state %d sc %p\n",
 			  task->itt, task->state, task->sc);
@@ -525,10 +526,10 @@ static void iscsi_free_task(struct iscsi_task *task)
 		/* SCSI eh reuses commands to verify us */
 		sc->SCp.ptr = NULL;
 		/*
-		 * queue command may call this to free the task, but
-		 * not have setup the sc callback
+		 * queue command may call this to free the task, so
+		 * it will decide how to return sc to scsi-ml.
 		 */
-		if (sc->scsi_done)
+		if (oldstate != ISCSI_TASK_REQUEUE_SCSIQ)
 			sc->scsi_done(sc);
 	}
 }
@@ -539,11 +540,12 @@ void __iscsi_get_task(struct iscsi_task *task)
 }
 EXPORT_SYMBOL_GPL(__iscsi_get_task);
 
-static void __iscsi_put_task(struct iscsi_task *task)
+void __iscsi_put_task(struct iscsi_task *task)
 {
 	if (atomic_dec_and_test(&task->refcount))
 		iscsi_free_task(task);
 }
+EXPORT_SYMBOL_GPL(__iscsi_put_task);
 
 void iscsi_put_task(struct iscsi_task *task)
 {
@@ -571,7 +573,8 @@ static void iscsi_complete_task(struct iscsi_task *task, int state)
 			  task->itt, task->state, task->sc);
 	if (task->state == ISCSI_TASK_COMPLETED ||
 	    task->state == ISCSI_TASK_ABRT_TMF ||
-	    task->state == ISCSI_TASK_ABRT_SESS_RECOV)
+	    task->state == ISCSI_TASK_ABRT_SESS_RECOV ||
+	    task->state == ISCSI_TASK_REQUEUE_SCSIQ)
 		return;
 	WARN_ON_ONCE(task->state == ISCSI_TASK_FREE);
 	task->state = state;
@@ -1335,17 +1338,16 @@ void iscsi_session_failure(struct iscsi_session *session,
 {
 	struct iscsi_conn *conn;
 	struct device *dev;
-	unsigned long flags;
 
-	spin_lock_irqsave(&session->lock, flags);
+	spin_lock_bh(&session->lock);
 	conn = session->leadconn;
 	if (session->state == ISCSI_STATE_TERMINATE || !conn) {
-		spin_unlock_irqrestore(&session->lock, flags);
+		spin_unlock_bh(&session->lock);
 		return;
 	}
 
 	dev = get_device(&conn->cls_conn->dev);
-	spin_unlock_irqrestore(&session->lock, flags);
+	spin_unlock_bh(&session->lock);
 	if (!dev)
 	        return;
 	/*
@@ -1364,17 +1366,16 @@ EXPORT_SYMBOL_GPL(iscsi_session_failure);
 void iscsi_conn_failure(struct iscsi_conn *conn, enum iscsi_err err)
 {
 	struct iscsi_session *session = conn->session;
-	unsigned long flags;
 
-	spin_lock_irqsave(&session->lock, flags);
+	spin_lock_bh(&session->lock);
 	if (session->state == ISCSI_STATE_FAILED) {
-		spin_unlock_irqrestore(&session->lock, flags);
+		spin_unlock_bh(&session->lock);
 		return;
 	}
 
 	if (conn->stop_stage == 0)
 		session->state = ISCSI_STATE_FAILED;
-	spin_unlock_irqrestore(&session->lock, flags);
+	spin_unlock_bh(&session->lock);
 
 	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_tx);
 	set_bit(ISCSI_SUSPEND_BIT, &conn->suspend_rx);
@@ -1599,27 +1600,23 @@ enum {
 	FAILURE_SESSION_NOT_READY,
 };
 
-int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc)
 {
 	struct iscsi_cls_session *cls_session;
-	struct Scsi_Host *host;
 	struct iscsi_host *ihost;
 	int reason = 0;
 	struct iscsi_session *session;
 	struct iscsi_conn *conn;
 	struct iscsi_task *task = NULL;
 
-	sc->scsi_done = done;
 	sc->result = 0;
 	sc->SCp.ptr = NULL;
 
-	host = sc->device->host;
 	ihost = shost_priv(host);
-	spin_unlock(host->host_lock);
 
 	cls_session = starget_to_session(scsi_target(sc->device));
 	session = cls_session->dd_data;
-	spin_lock(&session->lock);
+	spin_lock_bh(&session->lock);
 
 	reason = iscsi_session_chkready(cls_session);
 	if (reason) {
@@ -1705,25 +1702,21 @@ int iscsi_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 	}
 
 	session->queued_cmdsn++;
-	spin_unlock(&session->lock);
-	spin_lock(host->host_lock);
+	spin_unlock_bh(&session->lock);
 	return 0;
 
 prepd_reject:
-	sc->scsi_done = NULL;
-	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
+	iscsi_complete_task(task, ISCSI_TASK_REQUEUE_SCSIQ);
 reject:
-	spin_unlock(&session->lock);
+	spin_unlock_bh(&session->lock);
 	ISCSI_DBG_SESSION(session, "cmd 0x%x rejected (%d)\n",
 			  sc->cmnd[0], reason);
-	spin_lock(host->host_lock);
 	return SCSI_MLQUEUE_TARGET_BUSY;
 
 prepd_fault:
-	sc->scsi_done = NULL;
-	iscsi_complete_task(task, ISCSI_TASK_COMPLETED);
+	iscsi_complete_task(task, ISCSI_TASK_REQUEUE_SCSIQ);
 fault:
-	spin_unlock(&session->lock);
+	spin_unlock_bh(&session->lock);
 	ISCSI_DBG_SESSION(session, "iscsi: cmd 0x%x is not queued (%d)\n",
 			  sc->cmnd[0], reason);
 	if (!scsi_bidi_cmnd(sc))
@@ -1732,8 +1725,7 @@ fault:
 		scsi_out(sc)->resid = scsi_out(sc)->length;
 		scsi_in(sc)->resid = scsi_in(sc)->length;
 	}
-	done(sc);
-	spin_lock(host->host_lock);
+	sc->scsi_done(sc);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(iscsi_queuecommand);
@@ -1793,9 +1785,9 @@ static int iscsi_exec_task_mgmt_fn(struct iscsi_conn *conn,
 				      NULL, 0);
 	if (!task) {
 		spin_unlock_bh(&session->lock);
+		iscsi_conn_printk(KERN_ERR, conn, "Could not send TMF.\n");
 		iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
 		spin_lock_bh(&session->lock);
-		ISCSI_DBG_EH(session, "tmf exec failure\n");
 		return -EPERM;
 	}
 	conn->tmfcmd_pdus_cnt++;
@@ -2200,7 +2192,7 @@ int iscsi_eh_abort(struct scsi_cmnd *sc)
 		goto success_unlocked;
 	case TMF_TIMEDOUT:
 		spin_unlock_bh(&session->lock);
-		iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+		iscsi_conn_failure(conn, ISCSI_ERR_SCSI_EH_SESSION_RST);
 		goto failed_unlocked;
 	case TMF_NOT_FOUND:
 		if (!sc->SCp.ptr) {
@@ -2287,7 +2279,7 @@ int iscsi_eh_device_reset(struct scsi_cmnd *sc)
 		break;
 	case TMF_TIMEDOUT:
 		spin_unlock_bh(&session->lock);
-		iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+		iscsi_conn_failure(conn, ISCSI_ERR_SCSI_EH_SESSION_RST);
 		goto done;
 	default:
 		conn->tmf_state = TMF_INITIAL;
@@ -2368,7 +2360,7 @@ failed:
 	 * we drop the lock here but the leadconn cannot be destoyed while
 	 * we are in the scsi eh
 	 */
-	iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+	iscsi_conn_failure(conn, ISCSI_ERR_SCSI_EH_SESSION_RST);
 
 	ISCSI_DBG_EH(session, "wait for relogin\n");
 	wait_event_interruptible(conn->ehwait,
@@ -2450,7 +2442,7 @@ int iscsi_eh_target_reset(struct scsi_cmnd *sc)
 		break;
 	case TMF_TIMEDOUT:
 		spin_unlock_bh(&session->lock);
-		iscsi_conn_failure(conn, ISCSI_ERR_CONN_FAILED);
+		iscsi_conn_failure(conn, ISCSI_ERR_SCSI_EH_SESSION_RST);
 		goto done;
 	default:
 		conn->tmf_state = TMF_INITIAL;
diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c
index fe8b74c706d..5257fdfe699 100644
--- a/drivers/scsi/libsas/sas_port.c
+++ b/drivers/scsi/libsas/sas_port.c
@@ -28,6 +28,17 @@
 #include <scsi/scsi_transport_sas.h>
 #include "../scsi_sas_internal.h"
 
+static bool phy_is_wideport_member(struct asd_sas_port *port, struct asd_sas_phy *phy)
+{
+	struct sas_ha_struct *sas_ha = phy->ha;
+
+	if (memcmp(port->attached_sas_addr, phy->attached_sas_addr,
+		   SAS_ADDR_SIZE) != 0 || (sas_ha->strict_wide_ports &&
+	     memcmp(port->sas_addr, phy->sas_addr, SAS_ADDR_SIZE) != 0))
+		return false;
+	return true;
+}
+
 /**
  * sas_form_port -- add this phy to a port
  * @phy: the phy of interest
@@ -45,8 +56,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 	unsigned long flags;
 
 	if (port) {
-		if (memcmp(port->attached_sas_addr, phy->attached_sas_addr,
-			   SAS_ADDR_SIZE) != 0)
+		if (!phy_is_wideport_member(port, phy))
 			sas_deform_port(phy);
 		else {
 			SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n",
@@ -62,9 +72,7 @@ static void sas_form_port(struct asd_sas_phy *phy)
 		port = sas_ha->sas_port[i];
 		spin_lock(&port->phy_list_lock);
 		if (*(u64 *) port->sas_addr &&
-		    memcmp(port->attached_sas_addr,
-			   phy->attached_sas_addr, SAS_ADDR_SIZE) == 0 &&
-		    port->num_phys > 0) {
+		    phy_is_wideport_member(port, phy) && port->num_phys > 0) {
 			/* wide port */
 			SAS_DPRINTK("phy%d matched wide port%d\n", phy->id,
 				    port->id);
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 55f09e92ab5..29251fabecc 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -189,7 +189,7 @@ int sas_queue_up(struct sas_task *task)
  * Note: XXX: Remove the host unlock/lock pair when SCSI Core can
  * call us without holding an IRQ spinlock...
  */
-int sas_queuecommand(struct scsi_cmnd *cmd,
+static int sas_queuecommand_lck(struct scsi_cmnd *cmd,
 		     void (*scsi_done)(struct scsi_cmnd *))
 	__releases(host->host_lock)
 	__acquires(dev->sata_dev.ap->lock)
@@ -254,6 +254,8 @@ out:
 	return res;
 }
 
+DEF_SCSI_QCMD(sas_queuecommand)
+
 static void sas_eh_finish_cmd(struct scsi_cmnd *cmd)
 {
 	struct sas_task *task = TO_SAS_TASK(cmd);
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 196de40b906..746dd3d7a09 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -464,12 +464,29 @@ struct unsol_rcv_ct_ctx {
 #define UNSOL_VALID	0x00000001
 };
 
+#define LPFC_USER_LINK_SPEED_AUTO	0	/* auto select (default)*/
+#define LPFC_USER_LINK_SPEED_1G		1	/* 1 Gigabaud */
+#define LPFC_USER_LINK_SPEED_2G		2	/* 2 Gigabaud */
+#define LPFC_USER_LINK_SPEED_4G		4	/* 4 Gigabaud */
+#define LPFC_USER_LINK_SPEED_8G		8	/* 8 Gigabaud */
+#define LPFC_USER_LINK_SPEED_10G	10	/* 10 Gigabaud */
+#define LPFC_USER_LINK_SPEED_16G	16	/* 16 Gigabaud */
+#define LPFC_USER_LINK_SPEED_MAX	LPFC_USER_LINK_SPEED_16G
+#define LPFC_USER_LINK_SPEED_BITMAP ((1 << LPFC_USER_LINK_SPEED_16G) | \
+				     (1 << LPFC_USER_LINK_SPEED_10G) | \
+				     (1 << LPFC_USER_LINK_SPEED_8G) | \
+				     (1 << LPFC_USER_LINK_SPEED_4G) | \
+				     (1 << LPFC_USER_LINK_SPEED_2G) | \
+				     (1 << LPFC_USER_LINK_SPEED_1G) | \
+				     (1 << LPFC_USER_LINK_SPEED_AUTO))
+#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16"
+
 struct lpfc_hba {
 	/* SCSI interface function jump table entries */
 	int (*lpfc_new_scsi_buf)
 		(struct lpfc_vport *, int);
 	struct lpfc_scsi_buf * (*lpfc_get_scsi_buf)
-		(struct lpfc_hba *);
+		(struct lpfc_hba *, struct lpfc_nodelist *);
 	int (*lpfc_scsi_prep_dma_buf)
 		(struct lpfc_hba *, struct lpfc_scsi_buf *);
 	void (*lpfc_scsi_unprep_dma_buf)
@@ -545,7 +562,7 @@ struct lpfc_hba {
 	uint32_t hba_flag;	/* hba generic flags */
 #define HBA_ERATT_HANDLED	0x1 /* This flag is set when eratt handled */
 #define DEFER_ERATT		0x2 /* Deferred error attention in progress */
-#define HBA_FCOE_SUPPORT	0x4 /* HBA function supports FCOE */
+#define HBA_FCOE_MODE		0x4 /* HBA function in FCoE Mode */
 #define HBA_SP_QUEUE_EVT	0x8 /* Slow-path qevt posted to worker thread*/
 #define HBA_POST_RECEIVE_BUFFER 0x10 /* Rcv buffers need to be posted */
 #define FCP_XRI_ABORT_EVENT	0x20
@@ -557,6 +574,7 @@ struct lpfc_hba {
 #define HBA_FIP_SUPPORT		0x800 /* FIP support in HBA */
 #define HBA_AER_ENABLED		0x1000 /* AER enabled with HBA */
 #define HBA_DEVLOSS_TMO         0x2000 /* HBA in devloss timeout */
+#define HBA_RRQ_ACTIVE		0x4000 /* process the rrq active list */
 	uint32_t fcp_ring_in_use; /* When polling test if intr-hndlr active*/
 	struct lpfc_dmabuf slim2p;
 
@@ -606,6 +624,7 @@ struct lpfc_hba {
 	/* HBA Config Parameters */
 	uint32_t cfg_ack0;
 	uint32_t cfg_enable_npiv;
+	uint32_t cfg_enable_rrq;
 	uint32_t cfg_topology;
 	uint32_t cfg_link_speed;
 	uint32_t cfg_cr_delay;
@@ -716,6 +735,7 @@ struct lpfc_hba {
 	uint32_t total_scsi_bufs;
 	struct list_head lpfc_iocb_list;
 	uint32_t total_iocbq_bufs;
+	struct list_head active_rrq_list;
 	spinlock_t hbalock;
 
 	/* pci_mem_pools */
@@ -728,6 +748,7 @@ struct lpfc_hba {
 
 	mempool_t *mbox_mem_pool;
 	mempool_t *nlp_mem_pool;
+	mempool_t *rrq_pool;
 
 	struct fc_host_statistics link_stats;
 	enum intr_type_t intr_type;
@@ -784,6 +805,7 @@ struct lpfc_hba {
 	unsigned long skipped_hb;
 	struct timer_list hb_tmofunc;
 	uint8_t hb_outstanding;
+	struct timer_list rrq_tmr;
 	enum hba_temp_state over_temp_state;
 	/* ndlp reference management */
 	spinlock_t ndlp_lock;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index c1cbec01345..c06491b5862 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -52,10 +52,6 @@
 #define LPFC_MIN_DEVLOSS_TMO 1
 #define LPFC_MAX_DEVLOSS_TMO 255
 
-#define LPFC_MAX_LINK_SPEED 8
-#define LPFC_LINK_SPEED_BITMAP 0x00000117
-#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8"
-
 /**
  * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules
  * @incr: integer to convert.
@@ -463,7 +459,7 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr,
 		if (phba->sli.sli_flag & LPFC_MENLO_MAINT)
 			len += snprintf(buf + len, PAGE_SIZE-len,
 					"   Menlo Maint Mode\n");
-		else if (phba->fc_topology == TOPOLOGY_LOOP) {
+		else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 			if (vport->fc_flag & FC_PUBLIC_LOOP)
 				len += snprintf(buf + len, PAGE_SIZE-len,
 						"   Public Loop\n");
@@ -1981,6 +1977,13 @@ lpfc_param_show(enable_npiv);
 lpfc_param_init(enable_npiv, 1, 0, 1);
 static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, lpfc_enable_npiv_show, NULL);
 
+int lpfc_enable_rrq;
+module_param(lpfc_enable_rrq, int, 0);
+MODULE_PARM_DESC(lpfc_enable_rrq, "Enable RRQ functionality");
+lpfc_param_show(enable_rrq);
+lpfc_param_init(enable_rrq, 0, 0, 1);
+static DEVICE_ATTR(lpfc_enable_rrq, S_IRUGO, lpfc_enable_rrq_show, NULL);
+
 /*
 # lpfc_suppress_link_up:  Bring link up at initialization
 #            0x0  = bring link up (issue MBX_INIT_LINK)
@@ -2837,14 +2840,8 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = {
 /*
 # lpfc_link_speed: Link speed selection for initializing the Fibre Channel
 # connection.
-#       0  = auto select (default)
-#       1  = 1 Gigabaud
-#       2  = 2 Gigabaud
-#       4  = 4 Gigabaud
-#       8  = 8 Gigabaud
-# Value range is [0,8]. Default value is 0.
+# Value range is [0,16]. Default value is 0.
 */
-
 /**
  * lpfc_link_speed_set - Set the adapters link speed
  * @phba: lpfc_hba pointer.
@@ -2869,7 +2866,7 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
 	struct Scsi_Host  *shost = class_to_shost(dev);
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
 	struct lpfc_hba   *phba = vport->phba;
-	int val = 0;
+	int val = LPFC_USER_LINK_SPEED_AUTO;
 	int nolip = 0;
 	const char *val_buf = buf;
 	int err;
@@ -2885,15 +2882,20 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
 	if (sscanf(val_buf, "%i", &val) != 1)
 		return -EINVAL;
 
-	if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
-		((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
-		((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
-		((val == LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||
-		((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)))
+	if (((val == LPFC_USER_LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
+	    ((val == LPFC_USER_LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
+	    ((val == LPFC_USER_LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
+	    ((val == LPFC_USER_LINK_SPEED_8G) && !(phba->lmt & LMT_8Gb)) ||
+	    ((val == LPFC_USER_LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)) ||
+	    ((val == LPFC_USER_LINK_SPEED_16G) && !(phba->lmt & LMT_16Gb))) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2879 lpfc_link_speed attribute cannot be set "
+				"to %d. Speed is not supported by this port.\n",
+				val);
 		return -EINVAL;
-
-	if ((val >= 0 && val <= 8)
-		&& (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
+	}
+	if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) &&
+	    (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) {
 		prev_val = phba->cfg_link_speed;
 		phba->cfg_link_speed = val;
 		if (nolip)
@@ -2906,11 +2908,9 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
 		} else
 			return strlen(buf);
 	}
-
 	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-		"%d:0469 lpfc_link_speed attribute cannot be set to %d, "
-		"allowed range is [0, 8]\n",
-		phba->brd_no, val);
+		"0469 lpfc_link_speed attribute cannot be set to %d, "
+		"allowed values are ["LPFC_LINK_SPEED_STRING"]\n", val);
 	return -EINVAL;
 }
 
@@ -2938,8 +2938,8 @@ lpfc_param_show(link_speed)
 static int
 lpfc_link_speed_init(struct lpfc_hba *phba, int val)
 {
-	if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
-		&& (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
+	if ((val >= 0) && (val <= LPFC_USER_LINK_SPEED_MAX) &&
+	    (LPFC_USER_LINK_SPEED_BITMAP & (1 << val))) {
 		phba->cfg_link_speed = val;
 		return 0;
 	}
@@ -2947,12 +2947,12 @@ lpfc_link_speed_init(struct lpfc_hba *phba, int val)
 			"0405 lpfc_link_speed attribute cannot "
 			"be set to %d, allowed values are "
 			"["LPFC_LINK_SPEED_STRING"]\n", val);
-	phba->cfg_link_speed = 0;
+	phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
 	return -EINVAL;
 }
 
 static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
-		lpfc_link_speed_show, lpfc_link_speed_store);
+		   lpfc_link_speed_show, lpfc_link_speed_store);
 
 /*
 # lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER)
@@ -3305,12 +3305,12 @@ LPFC_ATTR_R(fcp_eq_count, LPFC_FP_EQN_DEF, LPFC_FP_EQN_MIN, LPFC_FP_EQN_MAX,
 LPFC_ATTR_R(enable_hba_reset, 1, 0, 1, "Enable HBA resets from the driver.");
 
 /*
-# lpfc_enable_hba_heartbeat: Enable HBA heartbeat timer..
+# lpfc_enable_hba_heartbeat: Disable HBA heartbeat timer..
 #       0  = HBA Heartbeat disabled
 #       1  = HBA Heartbeat enabled (default)
 # Value range is [0,1]. Default value is 1.
 */
-LPFC_ATTR_R(enable_hba_heartbeat, 1, 0, 1, "Enable HBA Heartbeat.");
+LPFC_ATTR_R(enable_hba_heartbeat, 0, 0, 1, "Enable HBA Heartbeat.");
 
 /*
 # lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF)
@@ -3401,6 +3401,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_lpfc_fdmi_on,
 	&dev_attr_lpfc_max_luns,
 	&dev_attr_lpfc_enable_npiv,
+	&dev_attr_lpfc_enable_rrq,
 	&dev_attr_nport_evt_cnt,
 	&dev_attr_board_mode,
 	&dev_attr_max_vpi,
@@ -3798,8 +3799,7 @@ sysfs_mbox_read(struct file *filp, struct kobject *kobj,
 			}
 			break;
 		case MBX_READ_SPARM64:
-		case MBX_READ_LA:
-		case MBX_READ_LA64:
+		case MBX_READ_TOPOLOGY:
 		case MBX_REG_LOGIN:
 		case MBX_REG_LOGIN64:
 		case MBX_CONFIG_PORT:
@@ -3989,7 +3989,7 @@ lpfc_get_host_port_type(struct Scsi_Host *shost)
 	if (vport->port_type == LPFC_NPIV_PORT) {
 		fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
 	} else if (lpfc_is_link_up(phba)) {
-		if (phba->fc_topology == TOPOLOGY_LOOP) {
+		if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 			if (vport->fc_flag & FC_PUBLIC_LOOP)
 				fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
 			else
@@ -4058,23 +4058,26 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
 
 	if (lpfc_is_link_up(phba)) {
 		switch(phba->fc_linkspeed) {
-			case LA_1GHZ_LINK:
-				fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
+		case LPFC_LINK_SPEED_1GHZ:
+			fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
 			break;
-			case LA_2GHZ_LINK:
-				fc_host_speed(shost) = FC_PORTSPEED_2GBIT;
+		case LPFC_LINK_SPEED_2GHZ:
+			fc_host_speed(shost) = FC_PORTSPEED_2GBIT;
 			break;
-			case LA_4GHZ_LINK:
-				fc_host_speed(shost) = FC_PORTSPEED_4GBIT;
+		case LPFC_LINK_SPEED_4GHZ:
+			fc_host_speed(shost) = FC_PORTSPEED_4GBIT;
 			break;
-			case LA_8GHZ_LINK:
-				fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
+		case LPFC_LINK_SPEED_8GHZ:
+			fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
 			break;
-			case LA_10GHZ_LINK:
-				fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+		case LPFC_LINK_SPEED_10GHZ:
+			fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
 			break;
-			default:
-				fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
+		case LPFC_LINK_SPEED_16GHZ:
+			fc_host_speed(shost) = FC_PORTSPEED_16GBIT;
+			break;
+		default:
+			fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
 			break;
 		}
 	} else
@@ -4097,7 +4100,7 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost)
 	spin_lock_irq(shost->host_lock);
 
 	if ((vport->fc_flag & FC_FABRIC) ||
-	    ((phba->fc_topology == TOPOLOGY_LOOP) &&
+	    ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
 	     (vport->fc_flag & FC_PUBLIC_LOOP)))
 		node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn);
 	else
@@ -4208,11 +4211,11 @@ lpfc_get_stats(struct Scsi_Host *shost)
 	hs->invalid_crc_count -= lso->invalid_crc_count;
 	hs->error_frames -= lso->error_frames;
 
-	if (phba->hba_flag & HBA_FCOE_SUPPORT) {
+	if (phba->hba_flag & HBA_FCOE_MODE) {
 		hs->lip_count = -1;
 		hs->nos_count = (phba->link_events >> 1);
 		hs->nos_count -= lso->link_events;
-	} else if (phba->fc_topology == TOPOLOGY_LOOP) {
+	} else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 		hs->lip_count = (phba->fc_eventTag >> 1);
 		hs->lip_count -= lso->link_events;
 		hs->nos_count = -1;
@@ -4303,7 +4306,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
 	lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;
 	lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
 	lso->error_frames = pmb->un.varRdLnk.crcCnt;
-	if (phba->hba_flag & HBA_FCOE_SUPPORT)
+	if (phba->hba_flag & HBA_FCOE_MODE)
 		lso->link_events = (phba->link_events >> 1);
 	else
 		lso->link_events = (phba->fc_eventTag >> 1);
@@ -4615,6 +4618,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_link_speed_init(phba, lpfc_link_speed);
 	lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
 	lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
+	lpfc_enable_rrq_init(phba, lpfc_enable_rrq);
 	lpfc_use_msi_init(phba, lpfc_use_msi);
 	lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
 	lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count);
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 7260c3af555..0dd43bb9161 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -162,7 +162,6 @@ lpfc_bsg_send_mgmt_cmd_cmp(struct lpfc_hba *phba,
 			struct lpfc_iocbq *cmdiocbq,
 			struct lpfc_iocbq *rspiocbq)
 {
-	unsigned long iflags;
 	struct bsg_job_data *dd_data;
 	struct fc_bsg_job *job;
 	IOCB_t *rsp;
@@ -173,9 +172,10 @@ lpfc_bsg_send_mgmt_cmd_cmp(struct lpfc_hba *phba,
 	int rc = 0;
 
 	spin_lock_irqsave(&phba->ct_ev_lock, flags);
-	dd_data = cmdiocbq->context1;
+	dd_data = cmdiocbq->context2;
 	if (!dd_data) {
 		spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
+		lpfc_sli_release_iocbq(phba, cmdiocbq);
 		return;
 	}
 
@@ -183,17 +183,9 @@ lpfc_bsg_send_mgmt_cmd_cmp(struct lpfc_hba *phba,
 	job = iocb->set_job;
 	job->dd_data = NULL; /* so timeout handler does not reply */
 
-	spin_lock_irqsave(&phba->hbalock, iflags);
-	cmdiocbq->iocb_flag |= LPFC_IO_WAKE;
-	if (cmdiocbq->context2 && rspiocbq)
-		memcpy(&((struct lpfc_iocbq *)cmdiocbq->context2)->iocb,
-		       &rspiocbq->iocb, sizeof(IOCB_t));
-	spin_unlock_irqrestore(&phba->hbalock, iflags);
-
 	bmp = iocb->bmp;
-	rspiocbq = iocb->rspiocbq;
 	rsp = &rspiocbq->iocb;
-	ndlp = iocb->ndlp;
+	ndlp = cmdiocbq->context1;
 
 	pci_unmap_sg(phba->pcidev, job->request_payload.sg_list,
 		     job->request_payload.sg_cnt, DMA_TO_DEVICE);
@@ -220,7 +212,6 @@ lpfc_bsg_send_mgmt_cmd_cmp(struct lpfc_hba *phba,
 			rsp->un.genreq64.bdl.bdeSize;
 
 	lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
-	lpfc_sli_release_iocbq(phba, rspiocbq);
 	lpfc_sli_release_iocbq(phba, cmdiocbq);
 	lpfc_nlp_put(ndlp);
 	kfree(bmp);
@@ -247,9 +238,7 @@ lpfc_bsg_send_mgmt_cmd(struct fc_bsg_job *job)
 	struct ulp_bde64 *bpl = NULL;
 	uint32_t timeout;
 	struct lpfc_iocbq *cmdiocbq = NULL;
-	struct lpfc_iocbq *rspiocbq = NULL;
 	IOCB_t *cmd;
-	IOCB_t *rsp;
 	struct lpfc_dmabuf *bmp = NULL;
 	int request_nseg;
 	int reply_nseg;
@@ -296,17 +285,10 @@ lpfc_bsg_send_mgmt_cmd(struct fc_bsg_job *job)
 	}
 
 	cmd = &cmdiocbq->iocb;
-	rspiocbq = lpfc_sli_get_iocbq(phba);
-	if (!rspiocbq) {
-		rc = -ENOMEM;
-		goto free_cmdiocbq;
-	}
-
-	rsp = &rspiocbq->iocb;
 	bmp->virt = lpfc_mbuf_alloc(phba, 0, &bmp->phys);
 	if (!bmp->virt) {
 		rc = -ENOMEM;
-		goto free_rspiocbq;
+		goto free_cmdiocbq;
 	}
 
 	INIT_LIST_HEAD(&bmp->list);
@@ -358,14 +340,12 @@ lpfc_bsg_send_mgmt_cmd(struct fc_bsg_job *job)
 	cmd->ulpTimeout = timeout;
 
 	cmdiocbq->iocb_cmpl = lpfc_bsg_send_mgmt_cmd_cmp;
-	cmdiocbq->context1 = dd_data;
-	cmdiocbq->context2 = rspiocbq;
+	cmdiocbq->context1 = ndlp;
+	cmdiocbq->context2 = dd_data;
 	dd_data->type = TYPE_IOCB;
 	dd_data->context_un.iocb.cmdiocbq = cmdiocbq;
-	dd_data->context_un.iocb.rspiocbq = rspiocbq;
 	dd_data->context_un.iocb.set_job = job;
 	dd_data->context_un.iocb.bmp = bmp;
-	dd_data->context_un.iocb.ndlp = ndlp;
 
 	if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
 		creg_val = readl(phba->HCregaddr);
@@ -391,8 +371,6 @@ lpfc_bsg_send_mgmt_cmd(struct fc_bsg_job *job)
 
 	lpfc_mbuf_free(phba, bmp->virt, bmp->phys);
 
-free_rspiocbq:
-	lpfc_sli_release_iocbq(phba, rspiocbq);
 free_cmdiocbq:
 	lpfc_sli_release_iocbq(phba, cmdiocbq);
 free_bmp:
@@ -1220,7 +1198,7 @@ lpfc_issue_ct_rsp_cmp(struct lpfc_hba *phba,
 	int rc = 0;
 
 	spin_lock_irqsave(&phba->ct_ev_lock, flags);
-	dd_data = cmdiocbq->context1;
+	dd_data = cmdiocbq->context2;
 	/* normal completion and timeout crossed paths, already done */
 	if (!dd_data) {
 		spin_unlock_irqrestore(&phba->ct_ev_lock, flags);
@@ -1369,8 +1347,8 @@ lpfc_issue_ct_rsp(struct lpfc_hba *phba, struct fc_bsg_job *job, uint32_t tag,
 	ctiocb->context3 = bmp;
 
 	ctiocb->iocb_cmpl = lpfc_issue_ct_rsp_cmp;
-	ctiocb->context1 = dd_data;
-	ctiocb->context2 = NULL;
+	ctiocb->context2 = dd_data;
+	ctiocb->context1 = ndlp;
 	dd_data->type = TYPE_IOCB;
 	dd_data->context_un.iocb.cmdiocbq = ctiocb;
 	dd_data->context_un.iocb.rspiocbq = NULL;
@@ -1641,7 +1619,7 @@ job_error:
  * This function obtains a remote port login id so the diag loopback test
  * can send and receive its own unsolicited CT command.
  **/
-static int lpfcdiag_loop_self_reg(struct lpfc_hba *phba, uint16_t * rpi)
+static int lpfcdiag_loop_self_reg(struct lpfc_hba *phba, uint16_t *rpi)
 {
 	LPFC_MBOXQ_t *mbox;
 	struct lpfc_dmabuf *dmabuff;
@@ -1651,10 +1629,14 @@ static int lpfcdiag_loop_self_reg(struct lpfc_hba *phba, uint16_t * rpi)
 	if (!mbox)
 		return -ENOMEM;
 
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		*rpi = lpfc_sli4_alloc_rpi(phba);
 	status = lpfc_reg_rpi(phba, 0, phba->pport->fc_myDID,
-				(uint8_t *)&phba->pport->fc_sparam, mbox, 0);
+			      (uint8_t *)&phba->pport->fc_sparam, mbox, *rpi);
 	if (status) {
 		mempool_free(mbox, phba->mbox_mem_pool);
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			lpfc_sli4_free_rpi(phba, *rpi);
 		return -ENOMEM;
 	}
 
@@ -1668,6 +1650,8 @@ static int lpfcdiag_loop_self_reg(struct lpfc_hba *phba, uint16_t * rpi)
 		kfree(dmabuff);
 		if (status != MBX_TIMEOUT)
 			mempool_free(mbox, phba->mbox_mem_pool);
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			lpfc_sli4_free_rpi(phba, *rpi);
 		return -ENODEV;
 	}
 
@@ -1704,8 +1688,9 @@ static int lpfcdiag_loop_self_unreg(struct lpfc_hba *phba, uint16_t rpi)
 			mempool_free(mbox, phba->mbox_mem_pool);
 		return -EIO;
 	}
-
 	mempool_free(mbox, phba->mbox_mem_pool);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		lpfc_sli4_free_rpi(phba, rpi);
 	return 0;
 }
 
@@ -2102,7 +2087,7 @@ lpfc_bsg_diag_test(struct fc_bsg_job *job)
 	uint32_t size;
 	uint32_t full_size;
 	size_t segment_len = 0, segment_offset = 0, current_offset = 0;
-	uint16_t rpi;
+	uint16_t rpi = 0;
 	struct lpfc_iocbq *cmdiocbq, *rspiocbq;
 	IOCB_t *cmd, *rsp;
 	struct lpfc_sli_ct_request *ctreq;
@@ -2162,7 +2147,7 @@ lpfc_bsg_diag_test(struct fc_bsg_job *job)
 		goto loopback_test_exit;
 	}
 
-	if (size >= BUF_SZ_4K) {
+	if (full_size >= BUF_SZ_4K) {
 		/*
 		 * Allocate memory for ioctl data. If buffer is bigger than 64k,
 		 * then we allocate 64k and re-use that buffer over and over to
@@ -2171,7 +2156,7 @@ lpfc_bsg_diag_test(struct fc_bsg_job *job)
 		 * problem with GET_FCPTARGETMAPPING...
 		 */
 		if (size <= (64 * 1024))
-			total_mem = size;
+			total_mem = full_size;
 		else
 			total_mem = 64 * 1024;
 	} else
@@ -2189,7 +2174,6 @@ lpfc_bsg_diag_test(struct fc_bsg_job *job)
 	sg_copy_to_buffer(job->request_payload.sg_list,
 				job->request_payload.sg_cnt,
 				ptr, size);
-
 	rc = lpfcdiag_loop_self_reg(phba, &rpi);
 	if (rc)
 		goto loopback_test_exit;
@@ -2601,12 +2585,11 @@ static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba,
 			phba->wait_4_mlo_maint_flg = 1;
 		} else if (mb->un.varWords[0] == SETVAR_MLORST) {
 			phba->link_flag &= ~LS_LOOPBACK_MODE;
-			phba->fc_topology = TOPOLOGY_PT_PT;
+			phba->fc_topology = LPFC_TOPOLOGY_PT_PT;
 		}
 		break;
 	case MBX_READ_SPARM64:
-	case MBX_READ_LA:
-	case MBX_READ_LA64:
+	case MBX_READ_TOPOLOGY:
 	case MBX_REG_LOGIN:
 	case MBX_REG_LOGIN64:
 	case MBX_CONFIG_PORT:
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index a5f5a093a8a..17fde522c84 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -31,7 +31,7 @@ void lpfc_read_nv(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_config_async(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t);
 
 void lpfc_heart_beat(struct lpfc_hba *, LPFC_MBOXQ_t *);
-int lpfc_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *, struct lpfc_dmabuf *);
+int lpfc_read_topology(struct lpfc_hba *, LPFC_MBOXQ_t *, struct lpfc_dmabuf *);
 void lpfc_clear_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_issue_clear_la(struct lpfc_hba *, struct lpfc_vport *);
 void lpfc_config_link(struct lpfc_hba *, LPFC_MBOXQ_t *);
@@ -40,7 +40,7 @@ int lpfc_read_sparam(struct lpfc_hba *, LPFC_MBOXQ_t *, int);
 void lpfc_read_config(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_read_lnk_stat(struct lpfc_hba *, LPFC_MBOXQ_t *);
 int lpfc_reg_rpi(struct lpfc_hba *, uint16_t, uint32_t, uint8_t *,
-		 LPFC_MBOXQ_t *, uint32_t);
+		 LPFC_MBOXQ_t *, uint16_t);
 void lpfc_set_var(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
 void lpfc_unreg_login(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
 void lpfc_unreg_did(struct lpfc_hba *, uint16_t, uint32_t, LPFC_MBOXQ_t *);
@@ -64,7 +64,7 @@ void lpfc_cleanup_pending_mbox(struct lpfc_vport *);
 int lpfc_linkdown(struct lpfc_hba *);
 void lpfc_linkdown_port(struct lpfc_vport *);
 void lpfc_port_link_failure(struct lpfc_vport *);
-void lpfc_mbx_cmpl_read_la(struct lpfc_hba *, LPFC_MBOXQ_t *);
+void lpfc_mbx_cmpl_read_topology(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_init_vpi_cmpl(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_cancel_all_vport_retry_delay_timer(struct lpfc_hba *);
 void lpfc_retry_pport_discovery(struct lpfc_hba *);
@@ -121,6 +121,7 @@ void lpfc_end_rscn(struct lpfc_vport *);
 int lpfc_els_chk_latt(struct lpfc_vport *);
 int lpfc_els_abort_flogi(struct lpfc_hba *);
 int lpfc_initial_flogi(struct lpfc_vport *);
+void lpfc_issue_init_vfi(struct lpfc_vport *);
 int lpfc_initial_fdisc(struct lpfc_vport *);
 int lpfc_issue_els_plogi(struct lpfc_vport *, uint32_t, uint8_t);
 int lpfc_issue_els_prli(struct lpfc_vport *, struct lpfc_nodelist *, uint8_t);
@@ -415,5 +416,13 @@ struct lpfc_iocbq *lpfc_sli_ringtx_get(struct lpfc_hba *,
 int __lpfc_sli_issue_iocb(struct lpfc_hba *, uint32_t,
 	struct lpfc_iocbq *, uint32_t);
 uint32_t lpfc_drain_txq(struct lpfc_hba *);
-
-
+void lpfc_clr_rrq_active(struct lpfc_hba *, uint16_t, struct lpfc_node_rrq *);
+int lpfc_test_rrq_active(struct lpfc_hba *, struct lpfc_nodelist *, uint16_t);
+void lpfc_handle_rrq_active(struct lpfc_hba *);
+int lpfc_send_rrq(struct lpfc_hba *, struct lpfc_node_rrq *);
+int lpfc_set_rrq_active(struct lpfc_hba *, struct lpfc_nodelist *,
+	uint16_t, uint16_t, uint16_t);
+void lpfc_cleanup_wt_rrqs(struct lpfc_hba *);
+void lpfc_cleanup_vports_rrqs(struct lpfc_vport *);
+struct lpfc_node_rrq *lpfc_get_active_rrq(struct lpfc_vport *, uint16_t,
+	uint32_t);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index 463b74902ac..c004fa9a681 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -48,14 +48,14 @@
 #include "lpfc_vport.h"
 #include "lpfc_debugfs.h"
 
-#define HBA_PORTSPEED_UNKNOWN               0	/* Unknown - transceiver
-						 * incapable of reporting */
-#define HBA_PORTSPEED_1GBIT                 1	/* 1 GBit/sec */
-#define HBA_PORTSPEED_2GBIT                 2	/* 2 GBit/sec */
-#define HBA_PORTSPEED_4GBIT                 8   /* 4 GBit/sec */
-#define HBA_PORTSPEED_8GBIT                16   /* 8 GBit/sec */
-#define HBA_PORTSPEED_10GBIT                4	/* 10 GBit/sec */
-#define HBA_PORTSPEED_NOT_NEGOTIATED        5	/* Speed not established */
+/* FDMI Port Speed definitions */
+#define HBA_PORTSPEED_1GBIT		0x0001	/* 1 GBit/sec */
+#define HBA_PORTSPEED_2GBIT		0x0002	/* 2 GBit/sec */
+#define HBA_PORTSPEED_4GBIT		0x0008	/* 4 GBit/sec */
+#define HBA_PORTSPEED_10GBIT		0x0004	/* 10 GBit/sec */
+#define HBA_PORTSPEED_8GBIT		0x0010	/* 8 GBit/sec */
+#define HBA_PORTSPEED_16GBIT		0x0020	/* 16 GBit/sec */
+#define HBA_PORTSPEED_UNKNOWN		0x0800	/* Unknown */
 
 #define FOURBYTES	4
 
@@ -1593,8 +1593,10 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, int cmdcode)
 			ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 4);
 
 			ae->un.SupportSpeed = 0;
+			if (phba->lmt & LMT_16Gb)
+				ae->un.SupportSpeed |= HBA_PORTSPEED_16GBIT;
 			if (phba->lmt & LMT_10Gb)
-				ae->un.SupportSpeed = HBA_PORTSPEED_10GBIT;
+				ae->un.SupportSpeed |= HBA_PORTSPEED_10GBIT;
 			if (phba->lmt & LMT_8Gb)
 				ae->un.SupportSpeed |= HBA_PORTSPEED_8GBIT;
 			if (phba->lmt & LMT_4Gb)
@@ -1612,24 +1614,26 @@ lpfc_fdmi_cmd(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, int cmdcode)
 			ae->ad.bits.AttrType = be16_to_cpu(PORT_SPEED);
 			ae->ad.bits.AttrLen = be16_to_cpu(FOURBYTES + 4);
 			switch(phba->fc_linkspeed) {
-				case LA_1GHZ_LINK:
-					ae->un.PortSpeed = HBA_PORTSPEED_1GBIT;
+			case LPFC_LINK_SPEED_1GHZ:
+				ae->un.PortSpeed = HBA_PORTSPEED_1GBIT;
 				break;
-				case LA_2GHZ_LINK:
-					ae->un.PortSpeed = HBA_PORTSPEED_2GBIT;
+			case LPFC_LINK_SPEED_2GHZ:
+				ae->un.PortSpeed = HBA_PORTSPEED_2GBIT;
 				break;
-				case LA_4GHZ_LINK:
-					ae->un.PortSpeed = HBA_PORTSPEED_4GBIT;
+			case LPFC_LINK_SPEED_4GHZ:
+				ae->un.PortSpeed = HBA_PORTSPEED_4GBIT;
 				break;
-				case LA_8GHZ_LINK:
-					ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
+			case LPFC_LINK_SPEED_8GHZ:
+				ae->un.PortSpeed = HBA_PORTSPEED_8GBIT;
 				break;
-				case LA_10GHZ_LINK:
-					ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
+			case LPFC_LINK_SPEED_10GHZ:
+				ae->un.PortSpeed = HBA_PORTSPEED_10GBIT;
 				break;
-				default:
-					ae->un.PortSpeed =
-						HBA_PORTSPEED_UNKNOWN;
+			case LPFC_LINK_SPEED_16GHZ:
+				ae->un.PortSpeed = HBA_PORTSPEED_16GBIT;
+				break;
+			default:
+				ae->un.PortSpeed = HBA_PORTSPEED_UNKNOWN;
 				break;
 			}
 			pab->ab.EntryCnt++;
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index 7cae69de36f..1d84b63fcca 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -68,6 +68,12 @@ struct lpfc_fast_path_event {
 	} un;
 };
 
+#define LPFC_SLI4_MAX_XRI	1024	/* Used to make the ndlp's xri_bitmap */
+#define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG)
+struct lpfc_node_rrqs {
+	unsigned long xri_bitmap[XRI_BITMAP_ULONGS];
+};
+
 struct lpfc_nodelist {
 	struct list_head nlp_listp;
 	struct lpfc_name nlp_portname;
@@ -110,8 +116,19 @@ struct lpfc_nodelist {
 	atomic_t cmd_pending;
 	uint32_t cmd_qdepth;
 	unsigned long last_change_time;
+	struct lpfc_node_rrqs active_rrqs;
 	struct lpfc_scsicmd_bkt *lat_data;	/* Latency data */
 };
+struct lpfc_node_rrq {
+	struct list_head list;
+	uint16_t xritag;
+	uint16_t send_rrq;
+	uint16_t rxid;
+	uint32_t         nlp_DID;		/* FC D_ID of entry */
+	struct lpfc_vport *vport;
+	struct lpfc_nodelist *ndlp;
+	unsigned long rrq_stop_time;
+};
 
 /* Defines for nlp_flag (uint32) */
 #define NLP_IGNR_REG_CMPL  0x00000001 /* Rcvd rscn before we cmpl reg login */
@@ -136,7 +153,7 @@ struct lpfc_nodelist {
 #define NLP_NODEV_REMOVE   0x08000000	/* Defer removal till discovery ends */
 #define NLP_TARGET_REMOVE  0x10000000   /* Target remove in process */
 #define NLP_SC_REQ         0x20000000	/* Target requires authentication */
-#define NLP_RPI_VALID      0x80000000	/* nlp_rpi is valid */
+#define NLP_RPI_REGISTERED 0x80000000	/* nlp_rpi is valid */
 
 /* ndlp usage management macros */
 #define NLP_CHK_NODE_ACT(ndlp)		(((ndlp)->nlp_usg_map \
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 884f4d32179..c62d567cc84 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -375,7 +375,8 @@ lpfc_issue_fabric_reglogin(struct lpfc_vport *vport)
 		err = 4;
 		goto fail;
 	}
-	rc = lpfc_reg_rpi(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox, 0);
+	rc = lpfc_reg_rpi(phba, vport->vpi, Fabric_DID, (uint8_t *)sp, mbox,
+			  ndlp->nlp_rpi);
 	if (rc) {
 		err = 5;
 		goto fail_free_mbox;
@@ -523,7 +524,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	phba->fc_edtovResol = sp->cmn.edtovResolution;
 	phba->fc_ratov = (be32_to_cpu(sp->cmn.w2.r_a_tov) + 999) / 1000;
 
-	if (phba->fc_topology == TOPOLOGY_LOOP) {
+	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 		spin_lock_irq(shost->host_lock);
 		vport->fc_flag |= FC_PUBLIC_LOOP;
 		spin_unlock_irq(shost->host_lock);
@@ -832,6 +833,12 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		if (lpfc_els_retry(phba, cmdiocb, rspiocb))
 			goto out;
 
+		/* FLOGI failure */
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "0100 FLOGI failure Status:x%x/x%x TMO:x%x\n",
+				 irsp->ulpStatus, irsp->un.ulpWord[4],
+				 irsp->ulpTimeout);
+
 		/* FLOGI failed, so there is no fabric */
 		spin_lock_irq(shost->host_lock);
 		vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
@@ -843,13 +850,16 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		 */
 		if (phba->alpa_map[0] == 0) {
 			vport->cfg_discovery_threads = LPFC_MAX_DISC_THREADS;
+			if ((phba->sli_rev == LPFC_SLI_REV4) &&
+			    (!(vport->fc_flag & FC_VFI_REGISTERED) ||
+			     (vport->fc_prevDID != vport->fc_myDID))) {
+				if (vport->fc_flag & FC_VFI_REGISTERED)
+					lpfc_sli4_unreg_all_rpis(vport);
+				lpfc_issue_reg_vfi(vport);
+				lpfc_nlp_put(ndlp);
+				goto out;
+			}
 		}
-
-		/* FLOGI failure */
-		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
-				 "0100 FLOGI failure Status:x%x/x%x TMO:x%x\n",
-				 irsp->ulpStatus, irsp->un.ulpWord[4],
-				 irsp->ulpTimeout);
 		goto flogifail;
 	}
 	spin_lock_irq(shost->host_lock);
@@ -879,7 +889,7 @@ lpfc_cmpl_els_flogi(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		 */
 		if (sp->cmn.fPort)
 			rc = lpfc_cmpl_els_flogi_fabric(vport, ndlp, sp, irsp);
-		else if (!(phba->hba_flag & HBA_FCOE_SUPPORT))
+		else if (!(phba->hba_flag & HBA_FCOE_MODE))
 			rc = lpfc_cmpl_els_flogi_nport(vport, ndlp, sp);
 		else {
 			lpfc_printf_vlog(vport, KERN_ERR,
@@ -1014,7 +1024,9 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	if (sp->cmn.fcphHigh < FC_PH3)
 		sp->cmn.fcphHigh = FC_PH3;
 
-	if  (phba->sli_rev == LPFC_SLI_REV4) {
+	if  ((phba->sli_rev == LPFC_SLI_REV4) &&
+	     (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+	      LPFC_SLI_INTF_IF_TYPE_0)) {
 		elsiocb->iocb.ulpCt_h = ((SLI4_CT_FCFI >> 1) & 1);
 		elsiocb->iocb.ulpCt_l = (SLI4_CT_FCFI & 1);
 		/* FLOGI needs to be 3 for WQE FCFI */
@@ -1027,7 +1039,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		icmd->ulpCt_l = 0;
 	}
 
-	if (phba->fc_topology != TOPOLOGY_LOOP) {
+	if (phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
 		icmd->un.elsreq64.myID = 0;
 		icmd->un.elsreq64.fl = 1;
 	}
@@ -1281,6 +1293,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 	uint32_t rc, keepDID = 0;
 	int  put_node;
 	int  put_rport;
+	struct lpfc_node_rrqs rrq;
 
 	/* Fabric nodes can have the same WWPN so we don't bother searching
 	 * by WWPN.  Just return the ndlp that was given to us.
@@ -1298,6 +1311,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 
 	if (new_ndlp == ndlp && NLP_CHK_NODE_ACT(new_ndlp))
 		return ndlp;
+	memset(&rrq.xri_bitmap, 0, sizeof(new_ndlp->active_rrqs.xri_bitmap));
 
 	if (!new_ndlp) {
 		rc = memcmp(&ndlp->nlp_portname, name,
@@ -1318,12 +1332,25 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 		if (!new_ndlp)
 			return ndlp;
 		keepDID = new_ndlp->nlp_DID;
-	} else
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			memcpy(&rrq.xri_bitmap,
+				&new_ndlp->active_rrqs.xri_bitmap,
+				sizeof(new_ndlp->active_rrqs.xri_bitmap));
+	} else {
 		keepDID = new_ndlp->nlp_DID;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			memcpy(&rrq.xri_bitmap,
+				&new_ndlp->active_rrqs.xri_bitmap,
+				sizeof(new_ndlp->active_rrqs.xri_bitmap));
+	}
 
 	lpfc_unreg_rpi(vport, new_ndlp);
 	new_ndlp->nlp_DID = ndlp->nlp_DID;
 	new_ndlp->nlp_prev_state = ndlp->nlp_prev_state;
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		memcpy(new_ndlp->active_rrqs.xri_bitmap,
+			&ndlp->active_rrqs.xri_bitmap,
+			sizeof(ndlp->active_rrqs.xri_bitmap));
 
 	if (ndlp->nlp_flag & NLP_NPR_2B_DISC)
 		new_ndlp->nlp_flag |= NLP_NPR_2B_DISC;
@@ -1362,12 +1389,20 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
 
 		/* Two ndlps cannot have the same did on the nodelist */
 		ndlp->nlp_DID = keepDID;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			memcpy(&ndlp->active_rrqs.xri_bitmap,
+				&rrq.xri_bitmap,
+				sizeof(ndlp->active_rrqs.xri_bitmap));
 		lpfc_drop_node(vport, ndlp);
 	}
 	else {
 		lpfc_unreg_rpi(vport, ndlp);
 		/* Two ndlps cannot have the same did */
 		ndlp->nlp_DID = keepDID;
+		if (phba->sli_rev == LPFC_SLI_REV4)
+			memcpy(&ndlp->active_rrqs.xri_bitmap,
+				&rrq.xri_bitmap,
+				sizeof(ndlp->active_rrqs.xri_bitmap));
 		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
 		/* Since we are swapping the ndlp passed in with the new one
 		 * and the did has already been swapped, copy over the
@@ -1428,6 +1463,73 @@ lpfc_end_rscn(struct lpfc_vport *vport)
 }
 
 /**
+ * lpfc_cmpl_els_rrq - Completion handled for els RRQs.
+ * @phba: pointer to lpfc hba data structure.
+ * @cmdiocb: pointer to lpfc command iocb data structure.
+ * @rspiocb: pointer to lpfc response iocb data structure.
+ *
+ * This routine will call the clear rrq function to free the rrq and
+ * clear the xri's bit in the ndlp's xri_bitmap. If the ndlp does not
+ * exist then the clear_rrq is still called because the rrq needs to
+ * be freed.
+ **/
+
+static void
+lpfc_cmpl_els_rrq(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
+		    struct lpfc_iocbq *rspiocb)
+{
+	struct lpfc_vport *vport = cmdiocb->vport;
+	IOCB_t *irsp;
+	struct lpfc_nodelist *ndlp;
+	struct lpfc_node_rrq *rrq;
+
+	/* we pass cmdiocb to state machine which needs rspiocb as well */
+	rrq = cmdiocb->context_un.rrq;
+	cmdiocb->context_un.rsp_iocb = rspiocb;
+
+	irsp = &rspiocb->iocb;
+	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
+		"RRQ cmpl:      status:x%x/x%x did:x%x",
+		irsp->ulpStatus, irsp->un.ulpWord[4],
+		irsp->un.elsreq64.remoteID);
+
+	ndlp = lpfc_findnode_did(vport, irsp->un.elsreq64.remoteID);
+	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp) || ndlp != rrq->ndlp) {
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "2882 RRQ completes to NPort x%x "
+				 "with no ndlp. Data: x%x x%x x%x\n",
+				 irsp->un.elsreq64.remoteID,
+				 irsp->ulpStatus, irsp->un.ulpWord[4],
+				 irsp->ulpIoTag);
+		goto out;
+	}
+
+	/* rrq completes to NPort <nlp_DID> */
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+			 "2880 RRQ completes to NPort x%x "
+			 "Data: x%x x%x x%x x%x x%x\n",
+			 ndlp->nlp_DID, irsp->ulpStatus, irsp->un.ulpWord[4],
+			 irsp->ulpTimeout, rrq->xritag, rrq->rxid);
+
+	if (irsp->ulpStatus) {
+		/* Check for retry */
+		/* RRQ failed Don't print the vport to vport rjts */
+		if (irsp->ulpStatus != IOSTAT_LS_RJT ||
+			(((irsp->un.ulpWord[4]) >> 16 != LSRJT_INVALID_CMD) &&
+			((irsp->un.ulpWord[4]) >> 16 != LSRJT_UNABLE_TPC)) ||
+			(phba)->pport->cfg_log_verbose & LOG_ELS)
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
+				 "2881 RRQ failure DID:%06X Status:x%x/x%x\n",
+				 ndlp->nlp_DID, irsp->ulpStatus,
+				 irsp->un.ulpWord[4]);
+	}
+out:
+	if (rrq)
+		lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
+	lpfc_els_free_iocb(phba, cmdiocb);
+	return;
+}
+/**
  * lpfc_cmpl_els_plogi - Completion callback function for plogi
  * @phba: pointer to lpfc hba data structure.
  * @cmdiocb: pointer to lpfc command iocb data structure.
@@ -2722,7 +2824,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 			if (cmd == ELS_CMD_FLOGI) {
 				if (PCI_DEVICE_ID_HORNET ==
 					phba->pcidev->device) {
-					phba->fc_topology = TOPOLOGY_LOOP;
+					phba->fc_topology = LPFC_TOPOLOGY_LOOP;
 					phba->pport->fc_myDID = 0;
 					phba->alpa_map[0] = 0;
 					phba->alpa_map[1] = 0;
@@ -2877,7 +2979,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 		retry = 1;
 
 	if (((cmd == ELS_CMD_FLOGI) || (cmd == ELS_CMD_FDISC)) &&
-	    (phba->fc_topology != TOPOLOGY_LOOP) &&
+	    (phba->fc_topology != LPFC_TOPOLOGY_LOOP) &&
 	    !lpfc_error_lost_link(irsp)) {
 		/* FLOGI retry policy */
 		retry = 1;
@@ -3219,14 +3321,6 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 	struct lpfc_nodelist *ndlp = (struct lpfc_nodelist *) pmb->context2;
 
-	/*
-	 * This routine is used to register and unregister in previous SLI
-	 * modes.
-	 */
-	if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
-	    (phba->sli_rev == LPFC_SLI_REV4))
-		lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
-
 	pmb->context1 = NULL;
 	pmb->context2 = NULL;
 
@@ -3904,6 +3998,47 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
 }
 
 /**
+ * lpfc_els_clear_rrq - Clear the rq that this rrq describes.
+ * @vport: pointer to a virtual N_Port data structure.
+ * @iocb: pointer to the lpfc command iocb data structure.
+ * @ndlp: pointer to a node-list data structure.
+ *
+ * Return
+ **/
+static void
+lpfc_els_clear_rrq(struct lpfc_vport *vport,
+      struct lpfc_iocbq *iocb, struct lpfc_nodelist *ndlp)
+{
+	struct lpfc_hba  *phba = vport->phba;
+	uint8_t *pcmd;
+	struct RRQ *rrq;
+	uint16_t rxid;
+	struct lpfc_node_rrq *prrq;
+
+
+	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) iocb->context2)->virt);
+	pcmd += sizeof(uint32_t);
+	rrq = (struct RRQ *)pcmd;
+	rxid = bf_get(rrq_oxid, rrq);
+
+	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
+			"2883 Clear RRQ for SID:x%x OXID:x%x RXID:x%x"
+			" x%x x%x\n",
+			bf_get(rrq_did, rrq),
+			bf_get(rrq_oxid, rrq),
+			rxid,
+			iocb->iotag, iocb->iocb.ulpContext);
+
+	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_RSP,
+		"Clear RRQ:  did:x%x flg:x%x exchg:x%.08x",
+		ndlp->nlp_DID, ndlp->nlp_flag, rrq->rrq_exchg);
+	prrq = lpfc_get_active_rrq(vport, rxid, ndlp->nlp_DID);
+	if (prrq)
+		lpfc_clr_rrq_active(phba, rxid, prrq);
+	return;
+}
+
+/**
  * lpfc_els_rsp_echo_acc - Issue echo acc response
  * @vport: pointer to a virtual N_Port data structure.
  * @data: pointer to echo data to return in the accept.
@@ -4597,7 +4732,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 
 	lpfc_set_disctmo(vport);
 
-	if (phba->fc_topology == TOPOLOGY_LOOP) {
+	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 		/* We should never receive a FLOGI in loop mode, ignore it */
 		did = icmd->un.elsreq64.remoteID;
 
@@ -4792,6 +4927,8 @@ lpfc_els_rcv_rrq(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 		 struct lpfc_nodelist *ndlp)
 {
 	lpfc_els_rsp_acc(vport, ELS_CMD_ACC, cmdiocb, ndlp, NULL);
+	if (vport->phba->sli_rev == LPFC_SLI_REV4)
+		lpfc_els_clear_rrq(vport, cmdiocb, ndlp);
 }
 
 /**
@@ -4940,7 +5077,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	pcmd += sizeof(uint32_t); /* Skip past command */
 	rps_rsp = (RPS_RSP *)pcmd;
 
-	if (phba->fc_topology != TOPOLOGY_LOOP)
+	if (phba->fc_topology != LPFC_TOPOLOGY_LOOP)
 		status = 0x10;
 	else
 		status = 0x8;
@@ -5194,6 +5331,97 @@ reject_out:
 	return 0;
 }
 
+/* lpfc_issue_els_rrq - Process an unsolicited rps iocb
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @ndlp: pointer to a node-list data structure.
+ * @did: DID of the target.
+ * @rrq: Pointer to the rrq struct.
+ *
+ * Build a ELS RRQ command and send it to the target. If the issue_iocb is
+ * Successful the the completion handler will clear the RRQ.
+ *
+ * Return codes
+ *   0 - Successfully sent rrq els iocb.
+ *   1 - Failed to send rrq els iocb.
+ **/
+static int
+lpfc_issue_els_rrq(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
+			uint32_t did, struct lpfc_node_rrq *rrq)
+{
+	struct lpfc_hba  *phba = vport->phba;
+	struct RRQ *els_rrq;
+	IOCB_t *icmd;
+	struct lpfc_iocbq *elsiocb;
+	uint8_t *pcmd;
+	uint16_t cmdsize;
+	int ret;
+
+
+	if (ndlp != rrq->ndlp)
+		ndlp = rrq->ndlp;
+	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp))
+		return 1;
+
+	/* If ndlp is not NULL, we will bump the reference count on it */
+	cmdsize = (sizeof(uint32_t) + sizeof(struct RRQ));
+	elsiocb = lpfc_prep_els_iocb(vport, 1, cmdsize, 0, ndlp, did,
+				     ELS_CMD_RRQ);
+	if (!elsiocb)
+		return 1;
+
+	icmd = &elsiocb->iocb;
+	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) elsiocb->context2)->virt);
+
+	/* For RRQ request, remainder of payload is Exchange IDs */
+	*((uint32_t *) (pcmd)) = ELS_CMD_RRQ;
+	pcmd += sizeof(uint32_t);
+	els_rrq = (struct RRQ *) pcmd;
+
+	bf_set(rrq_oxid, els_rrq, rrq->xritag);
+	bf_set(rrq_rxid, els_rrq, rrq->rxid);
+	bf_set(rrq_did, els_rrq, vport->fc_myDID);
+	els_rrq->rrq = cpu_to_be32(els_rrq->rrq);
+	els_rrq->rrq_exchg = cpu_to_be32(els_rrq->rrq_exchg);
+
+
+	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_CMD,
+		"Issue RRQ:     did:x%x",
+		did, rrq->xritag, rrq->rxid);
+	elsiocb->context_un.rrq = rrq;
+	elsiocb->iocb_cmpl = lpfc_cmpl_els_rrq;
+	ret = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, elsiocb, 0);
+
+	if (ret == IOCB_ERROR) {
+		lpfc_els_free_iocb(phba, elsiocb);
+		return 1;
+	}
+	return 0;
+}
+
+/**
+ * lpfc_send_rrq - Sends ELS RRQ if needed.
+ * @phba: pointer to lpfc hba data structure.
+ * @rrq: pointer to the active rrq.
+ *
+ * This routine will call the lpfc_issue_els_rrq if the rrq is
+ * still active for the xri. If this function returns a failure then
+ * the caller needs to clean up the RRQ by calling lpfc_clr_active_rrq.
+ *
+ * Returns 0 Success.
+ *         1 Failure.
+ **/
+int
+lpfc_send_rrq(struct lpfc_hba *phba, struct lpfc_node_rrq *rrq)
+{
+	struct lpfc_nodelist *ndlp = lpfc_findnode_did(rrq->vport,
+							rrq->nlp_DID);
+	if (lpfc_test_rrq_active(phba, ndlp, rrq->xritag))
+		return lpfc_issue_els_rrq(rrq->vport, ndlp,
+					 rrq->nlp_DID, rrq);
+	else
+		return 1;
+}
+
 /**
  * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command
  * @vport: pointer to a host virtual N_Port data structure.
@@ -5482,7 +5710,7 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
 		    (memcmp(&phba->fc_fabparam.portName, &fp->FportName,
 			    sizeof(struct lpfc_name)))) {
 			/* This port has switched fabrics. FLOGI is required */
-			lpfc_initial_flogi(vport);
+			lpfc_issue_init_vfi(vport);
 		} else {
 			/* FAN verified - skip FLOGI */
 			vport->fc_myDID = vport->fc_prevDID;
@@ -6201,7 +6429,7 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 			cmd, did, vport->port_state);
 
 		/* Unsupported ELS command, reject */
-		rjt_err = LSRJT_INVALID_CMD;
+		rjt_err = LSRJT_CMD_UNSUPPORTED;
 
 		/* Unknown ELS command <elsCmd> received from NPORT <did> */
 		lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
@@ -6373,7 +6601,7 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
 	if (!ndlp) {
 		ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL);
 		if (!ndlp) {
-			if (phba->fc_topology == TOPOLOGY_LOOP) {
+			if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 				lpfc_disc_start(vport);
 				return;
 			}
@@ -6386,7 +6614,7 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
 	} else if (!NLP_CHK_NODE_ACT(ndlp)) {
 		ndlp = lpfc_enable_node(vport, ndlp, NLP_STE_UNUSED_NODE);
 		if (!ndlp) {
-			if (phba->fc_topology == TOPOLOGY_LOOP) {
+			if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 				lpfc_disc_start(vport);
 				return;
 			}
@@ -6408,18 +6636,31 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
 	}
 
 	if (vport->cfg_fdmi_on) {
-		ndlp_fdmi = mempool_alloc(phba->nlp_mem_pool,
-					  GFP_KERNEL);
+		/* If this is the first time, allocate an ndlp and initialize
+		 * it. Otherwise, make sure the node is enabled and then do the
+		 * login.
+		 */
+		ndlp_fdmi = lpfc_findnode_did(vport, FDMI_DID);
+		if (!ndlp_fdmi) {
+			ndlp_fdmi = mempool_alloc(phba->nlp_mem_pool,
+						  GFP_KERNEL);
+			if (ndlp_fdmi) {
+				lpfc_nlp_init(vport, ndlp_fdmi, FDMI_DID);
+				ndlp_fdmi->nlp_type |= NLP_FABRIC;
+			} else
+				return;
+		}
+		if (!NLP_CHK_NODE_ACT(ndlp_fdmi))
+			ndlp_fdmi = lpfc_enable_node(vport,
+						     ndlp_fdmi,
+						     NLP_STE_NPR_NODE);
+
 		if (ndlp_fdmi) {
-			lpfc_nlp_init(vport, ndlp_fdmi, FDMI_DID);
-			ndlp_fdmi->nlp_type |= NLP_FABRIC;
 			lpfc_nlp_set_state(vport, ndlp_fdmi,
-				NLP_STE_PLOGI_ISSUE);
-			lpfc_issue_els_plogi(vport, ndlp_fdmi->nlp_DID,
-					     0);
+					   NLP_STE_PLOGI_ISSUE);
+			lpfc_issue_els_plogi(vport, ndlp_fdmi->nlp_DID, 0);
 		}
 	}
-	return;
 }
 
 /**
@@ -6497,7 +6738,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 			spin_unlock_irq(shost->host_lock);
 			if (vport->port_type == LPFC_PHYSICAL_PORT
 				&& !(vport->fc_flag & FC_LOGO_RCVD_DID_CHNG))
-				lpfc_initial_flogi(vport);
+				lpfc_issue_init_vfi(vport);
 			else
 				lpfc_initial_fdisc(vport);
 			break;
@@ -6734,7 +6975,7 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	vport->fc_flag &= ~FC_VPORT_CVL_RCVD;
 	vport->fc_flag &= ~FC_VPORT_LOGO_RCVD;
 	vport->fc_flag |= FC_FABRIC;
-	if (vport->phba->fc_topology == TOPOLOGY_LOOP)
+	if (vport->phba->fc_topology == LPFC_TOPOLOGY_LOOP)
 		vport->fc_flag |=  FC_PUBLIC_LOOP;
 	spin_unlock_irq(shost->host_lock);
 
@@ -6844,7 +7085,9 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	icmd->un.elsreq64.myID = 0;
 	icmd->un.elsreq64.fl = 1;
 
-	if  (phba->sli_rev == LPFC_SLI_REV4) {
+	if  ((phba->sli_rev == LPFC_SLI_REV4) &&
+	     (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+	      LPFC_SLI_INTF_IF_TYPE_0)) {
 		/* FDISC needs to be 1 for WQE VPI */
 		elsiocb->iocb.ulpCt_h = (SLI4_CT_VPI >> 1) & 1;
 		elsiocb->iocb.ulpCt_l = SLI4_CT_VPI & 1 ;
@@ -7351,8 +7594,11 @@ lpfc_sli4_els_xri_aborted(struct lpfc_hba *phba,
 			  struct sli4_wcqe_xri_aborted *axri)
 {
 	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+	uint16_t rxid = bf_get(lpfc_wcqe_xa_remote_xid, axri);
+
 	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
 	unsigned long iflag = 0;
+	struct lpfc_nodelist *ndlp;
 	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 
 	spin_lock_irqsave(&phba->hbalock, iflag);
@@ -7361,11 +7607,14 @@ lpfc_sli4_els_xri_aborted(struct lpfc_hba *phba,
 			&phba->sli4_hba.lpfc_abts_els_sgl_list, list) {
 		if (sglq_entry->sli4_xritag == xri) {
 			list_del(&sglq_entry->list);
+			ndlp = sglq_entry->ndlp;
+			sglq_entry->ndlp = NULL;
 			list_add_tail(&sglq_entry->list,
 				&phba->sli4_hba.lpfc_sgl_list);
 			sglq_entry->state = SGL_FREED;
 			spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
 			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			lpfc_set_rrq_active(phba, ndlp, xri, rxid, 1);
 
 			/* Check if TXQ queue needs to be serviced */
 			if (pring->txq_cnt)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index a5d1695dac3..f9f160ab2ee 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -607,6 +607,8 @@ lpfc_work_done(struct lpfc_hba *phba)
 
 	/* Process SLI4 events */
 	if (phba->pci_dev_grp == LPFC_PCI_DEV_OC) {
+		if (phba->hba_flag & HBA_RRQ_ACTIVE)
+			lpfc_handle_rrq_active(phba);
 		if (phba->hba_flag & FCP_XRI_ABORT_EVENT)
 			lpfc_sli4_fcp_xri_abort_event_proc(phba);
 		if (phba->hba_flag & ELS_XRI_ABORT_EVENT)
@@ -966,6 +968,7 @@ lpfc_linkup(struct lpfc_hba *phba)
 	struct lpfc_vport **vports;
 	int i;
 
+	lpfc_cleanup_wt_rrqs(phba);
 	phba->link_state = LPFC_LINK_UP;
 
 	/* Unblock fabric iocbs if they are blocked */
@@ -1064,7 +1067,7 @@ lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 
 	mempool_free(pmb, phba->mbox_mem_pool);
 
-	if (phba->fc_topology == TOPOLOGY_LOOP &&
+	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP &&
 	    vport->fc_flag & FC_PUBLIC_LOOP &&
 	    !(vport->fc_flag & FC_LBIT)) {
 			/* Need to wait for FAN - use discovery timer
@@ -1078,9 +1081,8 @@ lpfc_mbx_cmpl_local_config_link(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	/* Start discovery by sending a FLOGI. port_state is identically
 	 * LPFC_FLOGI while waiting for FLOGI cmpl
 	 */
-	if (vport->port_state != LPFC_FLOGI) {
+	if (vport->port_state != LPFC_FLOGI)
 		lpfc_initial_flogi(vport);
-	}
 	return;
 
 out:
@@ -1131,7 +1133,7 @@ lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	if (vport->port_state != LPFC_FLOGI) {
 		phba->hba_flag |= FCF_RR_INPROG;
 		spin_unlock_irq(&phba->hbalock);
-		lpfc_initial_flogi(vport);
+		lpfc_issue_init_vfi(vport);
 		goto out;
 	}
 	spin_unlock_irq(&phba->hbalock);
@@ -1353,7 +1355,7 @@ lpfc_register_fcf(struct lpfc_hba *phba)
 		if (phba->pport->port_state != LPFC_FLOGI) {
 			phba->hba_flag |= FCF_RR_INPROG;
 			spin_unlock_irq(&phba->hbalock);
-			lpfc_initial_flogi(phba->pport);
+			lpfc_issue_init_vfi(phba->pport);
 			return;
 		}
 		spin_unlock_irq(&phba->hbalock);
@@ -2331,7 +2333,7 @@ lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 				phba->fcf.current_rec.fcf_indx, fcf_index);
 		/* Wait 500 ms before retrying FLOGI to current FCF */
 		msleep(500);
-		lpfc_initial_flogi(phba->pport);
+		lpfc_issue_init_vfi(phba->pport);
 		goto out;
 	}
 
@@ -2422,6 +2424,63 @@ out:
 }
 
 /**
+ * lpfc_init_vfi_cmpl - Completion handler for init_vfi mbox command.
+ * @phba: pointer to lpfc hba data structure.
+ * @mboxq: pointer to mailbox data structure.
+ *
+ * This function handles completion of init vfi mailbox command.
+ */
+void
+lpfc_init_vfi_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	struct lpfc_vport *vport = mboxq->vport;
+
+	if (mboxq->u.mb.mbxStatus && (mboxq->u.mb.mbxStatus != 0x4002)) {
+		lpfc_printf_vlog(vport, KERN_ERR,
+				LOG_MBOX,
+				"2891 Init VFI mailbox failed 0x%x\n",
+				mboxq->u.mb.mbxStatus);
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		lpfc_vport_set_state(vport, FC_VPORT_FAILED);
+		return;
+	}
+	lpfc_initial_flogi(vport);
+	mempool_free(mboxq, phba->mbox_mem_pool);
+	return;
+}
+
+/**
+ * lpfc_issue_init_vfi - Issue init_vfi mailbox command.
+ * @vport: pointer to lpfc_vport data structure.
+ *
+ * This function issue a init_vfi mailbox command to initialize the VFI and
+ * VPI for the physical port.
+ */
+void
+lpfc_issue_init_vfi(struct lpfc_vport *vport)
+{
+	LPFC_MBOXQ_t *mboxq;
+	int rc;
+	struct lpfc_hba *phba = vport->phba;
+
+	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mboxq) {
+		lpfc_printf_vlog(vport, KERN_ERR,
+			LOG_MBOX, "2892 Failed to allocate "
+			"init_vfi mailbox\n");
+		return;
+	}
+	lpfc_init_vfi(mboxq, vport);
+	mboxq->mbox_cmpl = lpfc_init_vfi_cmpl;
+	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED) {
+		lpfc_printf_vlog(vport, KERN_ERR,
+			LOG_MBOX, "2893 Failed to issue init_vfi mailbox\n");
+		mempool_free(mboxq, vport->phba->mbox_mem_pool);
+	}
+}
+
+/**
  * lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command.
  * @phba: pointer to lpfc hba data structure.
  * @mboxq: pointer to mailbox data structure.
@@ -2528,7 +2587,7 @@ lpfc_start_fdiscs(struct lpfc_hba *phba)
 						     FC_VPORT_FAILED);
 				continue;
 			}
-			if (phba->fc_topology == TOPOLOGY_LOOP) {
+			if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 				lpfc_vport_set_state(vports[i],
 						     FC_VPORT_LINKDOWN);
 				continue;
@@ -2564,7 +2623,7 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 			 "2018 REG_VFI mbxStatus error x%x "
 			 "HBA state x%x\n",
 			 mboxq->u.mb.mbxStatus, vport->port_state);
-		if (phba->fc_topology == TOPOLOGY_LOOP) {
+		if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 			/* FLOGI failed, use loop map to make discovery list */
 			lpfc_disc_list_loopmap(vport);
 			/* Start discovery */
@@ -2582,8 +2641,18 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	spin_unlock_irq(shost->host_lock);
 
 	if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
-		lpfc_start_fdiscs(phba);
-		lpfc_do_scr_ns_plogi(phba, vport);
+		/* For private loop just start discovery and we are done. */
+		if ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
+		    (phba->alpa_map[0] == 0) &&
+		    !(vport->fc_flag & FC_PUBLIC_LOOP)) {
+			/* Use loop map to make discovery list */
+			lpfc_disc_list_loopmap(vport);
+			/* Start discovery */
+			lpfc_disc_start(vport);
+		} else {
+			lpfc_start_fdiscs(phba);
+			lpfc_do_scr_ns_plogi(phba, vport);
+		}
 	}
 
 fail_free_mem:
@@ -2644,7 +2713,7 @@ out:
 }
 
 static void
-lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
+lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 {
 	struct lpfc_vport *vport = phba->pport;
 	LPFC_MBOXQ_t *sparam_mbox, *cfglink_mbox = NULL;
@@ -2654,31 +2723,24 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 	struct fcf_record *fcf_record;
 
 	spin_lock_irq(&phba->hbalock);
-	switch (la->UlnkSpeed) {
-	case LA_1GHZ_LINK:
-		phba->fc_linkspeed = LA_1GHZ_LINK;
-		break;
-	case LA_2GHZ_LINK:
-		phba->fc_linkspeed = LA_2GHZ_LINK;
-		break;
-	case LA_4GHZ_LINK:
-		phba->fc_linkspeed = LA_4GHZ_LINK;
-		break;
-	case LA_8GHZ_LINK:
-		phba->fc_linkspeed = LA_8GHZ_LINK;
-		break;
-	case LA_10GHZ_LINK:
-		phba->fc_linkspeed = LA_10GHZ_LINK;
+	switch (bf_get(lpfc_mbx_read_top_link_spd, la)) {
+	case LPFC_LINK_SPEED_1GHZ:
+	case LPFC_LINK_SPEED_2GHZ:
+	case LPFC_LINK_SPEED_4GHZ:
+	case LPFC_LINK_SPEED_8GHZ:
+	case LPFC_LINK_SPEED_10GHZ:
+	case LPFC_LINK_SPEED_16GHZ:
+		phba->fc_linkspeed = bf_get(lpfc_mbx_read_top_link_spd, la);
 		break;
 	default:
-		phba->fc_linkspeed = LA_UNKNW_LINK;
+		phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN;
 		break;
 	}
 
-	phba->fc_topology = la->topology;
+	phba->fc_topology = bf_get(lpfc_mbx_read_top_topology, la);
 	phba->link_flag &= ~LS_NPIV_FAB_SUPPORTED;
 
-	if (phba->fc_topology == TOPOLOGY_LOOP) {
+	if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 		phba->sli3_options &= ~LPFC_SLI3_NPIV_ENABLED;
 
 		/* if npiv is enabled and this adapter supports npiv log
@@ -2689,11 +2751,11 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 				"1309 Link Up Event npiv not supported in loop "
 				"topology\n");
 				/* Get Loop Map information */
-		if (la->il)
+		if (bf_get(lpfc_mbx_read_top_il, la))
 			vport->fc_flag |= FC_LBIT;
 
-		vport->fc_myDID = la->granted_AL_PA;
-		i = la->un.lilpBde64.tus.f.bdeSize;
+		vport->fc_myDID = bf_get(lpfc_mbx_read_top_alpa_granted, la);
+		i = la->lilpBde64.tus.f.bdeSize;
 
 		if (i == 0) {
 			phba->alpa_map[0] = 0;
@@ -2764,7 +2826,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, READ_LA_VAR *la)
 		goto out;
 	}
 
-	if (!(phba->hba_flag & HBA_FCOE_SUPPORT)) {
+	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
 		cfglink_mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 		if (!cfglink_mbox)
 			goto out;
@@ -2874,17 +2936,17 @@ lpfc_mbx_issue_link_down(struct lpfc_hba *phba)
 
 
 /*
- * This routine handles processing a READ_LA mailbox
+ * This routine handles processing a READ_TOPOLOGY mailbox
  * command upon completion. It is setup in the LPFC_MBOXQ
  * as the completion routine when the command is
  * handed off to the SLI layer.
  */
 void
-lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
+lpfc_mbx_cmpl_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 {
 	struct lpfc_vport *vport = pmb->vport;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
-	READ_LA_VAR *la;
+	struct lpfc_mbx_read_top *la;
 	MAILBOX_t *mb = &pmb->u.mb;
 	struct lpfc_dmabuf *mp = (struct lpfc_dmabuf *) (pmb->context1);
 
@@ -2897,15 +2959,15 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 				mb->mbxStatus, vport->port_state);
 		lpfc_mbx_issue_link_down(phba);
 		phba->link_state = LPFC_HBA_ERROR;
-		goto lpfc_mbx_cmpl_read_la_free_mbuf;
+		goto lpfc_mbx_cmpl_read_topology_free_mbuf;
 	}
 
-	la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
+	la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop;
 
 	memcpy(&phba->alpa_map[0], mp->virt, 128);
 
 	spin_lock_irq(shost->host_lock);
-	if (la->pb)
+	if (bf_get(lpfc_mbx_read_top_pb, la))
 		vport->fc_flag |= FC_BYPASSED_MODE;
 	else
 		vport->fc_flag &= ~FC_BYPASSED_MODE;
@@ -2914,41 +2976,48 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	if ((phba->fc_eventTag  < la->eventTag) ||
 	    (phba->fc_eventTag == la->eventTag)) {
 		phba->fc_stat.LinkMultiEvent++;
-		if (la->attType == AT_LINK_UP)
+		if (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP)
 			if (phba->fc_eventTag != 0)
 				lpfc_linkdown(phba);
 	}
 
 	phba->fc_eventTag = la->eventTag;
 	spin_lock_irq(&phba->hbalock);
-	if (la->mm)
+	if (bf_get(lpfc_mbx_read_top_mm, la))
 		phba->sli.sli_flag |= LPFC_MENLO_MAINT;
 	else
 		phba->sli.sli_flag &= ~LPFC_MENLO_MAINT;
 	spin_unlock_irq(&phba->hbalock);
 
 	phba->link_events++;
-	if (la->attType == AT_LINK_UP && (!la->mm)) {
+	if ((bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP) &&
+	    (!bf_get(lpfc_mbx_read_top_mm, la))) {
 		phba->fc_stat.LinkUp++;
 		if (phba->link_flag & LS_LOOPBACK_MODE) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
 					"1306 Link Up Event in loop back mode "
 					"x%x received Data: x%x x%x x%x x%x\n",
 					la->eventTag, phba->fc_eventTag,
-					la->granted_AL_PA, la->UlnkSpeed,
+					bf_get(lpfc_mbx_read_top_alpa_granted,
+					       la),
+					bf_get(lpfc_mbx_read_top_link_spd, la),
 					phba->alpa_map[0]);
 		} else {
 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
 					"1303 Link Up Event x%x received "
 					"Data: x%x x%x x%x x%x x%x x%x %d\n",
 					la->eventTag, phba->fc_eventTag,
-					la->granted_AL_PA, la->UlnkSpeed,
+					bf_get(lpfc_mbx_read_top_alpa_granted,
+					       la),
+					bf_get(lpfc_mbx_read_top_link_spd, la),
 					phba->alpa_map[0],
-					la->mm, la->fa,
+					bf_get(lpfc_mbx_read_top_mm, la),
+					bf_get(lpfc_mbx_read_top_fa, la),
 					phba->wait_4_mlo_maint_flg);
 		}
 		lpfc_mbx_process_link_up(phba, la);
-	} else if (la->attType == AT_LINK_DOWN) {
+	} else if (bf_get(lpfc_mbx_read_top_att_type, la) ==
+		   LPFC_ATT_LINK_DOWN) {
 		phba->fc_stat.LinkDown++;
 		if (phba->link_flag & LS_LOOPBACK_MODE) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
@@ -2964,11 +3033,13 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 				"Data: x%x x%x x%x x%x x%x\n",
 				la->eventTag, phba->fc_eventTag,
 				phba->pport->port_state, vport->fc_flag,
-				la->mm, la->fa);
+				bf_get(lpfc_mbx_read_top_mm, la),
+				bf_get(lpfc_mbx_read_top_fa, la));
 		}
 		lpfc_mbx_issue_link_down(phba);
 	}
-	if (la->mm && la->attType == AT_LINK_UP) {
+	if ((bf_get(lpfc_mbx_read_top_mm, la)) &&
+	    (bf_get(lpfc_mbx_read_top_att_type, la) == LPFC_ATT_LINK_UP)) {
 		if (phba->link_state != LPFC_LINK_DOWN) {
 			phba->fc_stat.LinkDown++;
 			lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
@@ -2996,14 +3067,15 @@ lpfc_mbx_cmpl_read_la(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		}
 	}
 
-	if (la->fa) {
-		if (la->mm)
+	if (bf_get(lpfc_mbx_read_top_fa, la)) {
+		if (bf_get(lpfc_mbx_read_top_mm, la))
 			lpfc_issue_clear_la(phba, vport);
 		lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
-				"1311 fa %d\n", la->fa);
+				"1311 fa %d\n",
+				bf_get(lpfc_mbx_read_top_fa, la));
 	}
 
-lpfc_mbx_cmpl_read_la_free_mbuf:
+lpfc_mbx_cmpl_read_topology_free_mbuf:
 	lpfc_mbuf_free(phba, mp->virt, mp->phys);
 	kfree(mp);
 	mempool_free(pmb, phba->mbox_mem_pool);
@@ -3030,8 +3102,8 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND)
 		ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND;
 
-	if (ndlp->nlp_flag &  NLP_IGNR_REG_CMPL ||
-		ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) {
+	if (ndlp->nlp_flag & NLP_IGNR_REG_CMPL ||
+	    ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE) {
 		/* We rcvd a rscn after issuing this
 		 * mbox reg login, we may have cycled
 		 * back through the state and be
@@ -3043,10 +3115,6 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		spin_lock_irq(shost->host_lock);
 		ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
 		spin_unlock_irq(shost->host_lock);
-		if (phba->sli_rev == LPFC_SLI_REV4)
-			lpfc_sli4_free_rpi(phba,
-				pmb->u.mb.un.varRegLogin.rpi);
-
 	} else
 		/* Good status, call state machine */
 		lpfc_disc_state_machine(vport, ndlp, pmb,
@@ -3092,6 +3160,7 @@ lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	spin_unlock_irq(shost->host_lock);
 	vport->unreg_vpi_cmpl = VPORT_OK;
 	mempool_free(pmb, phba->mbox_mem_pool);
+	lpfc_cleanup_vports_rrqs(vport);
 	/*
 	 * This shost reference might have been taken at the beginning of
 	 * lpfc_vport_delete()
@@ -3333,7 +3402,7 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		kfree(mp);
 		mempool_free(pmb, phba->mbox_mem_pool);
 
-		if (phba->fc_topology == TOPOLOGY_LOOP) {
+		if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 			/* FLOGI failed, use loop map to make discovery list */
 			lpfc_disc_list_loopmap(vport);
 
@@ -3355,7 +3424,7 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	}
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
-	ndlp->nlp_flag |= NLP_RPI_VALID;
+	ndlp->nlp_flag |= NLP_RPI_REGISTERED;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
@@ -3413,7 +3482,7 @@ out:
 		/* If no other thread is using the ndlp, free it */
 		lpfc_nlp_not_used(ndlp);
 
-		if (phba->fc_topology == TOPOLOGY_LOOP) {
+		if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
 			/*
 			 * RegLogin failed, use loop map to make discovery
 			 * list
@@ -3429,7 +3498,7 @@ out:
 	}
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
-	ndlp->nlp_flag |= NLP_RPI_VALID;
+	ndlp->nlp_flag |= NLP_RPI_REGISTERED;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
@@ -3762,6 +3831,8 @@ lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	NLP_INT_NODE_ACT(ndlp);
 	atomic_set(&ndlp->cmd_pending, 0);
 	ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth;
+	if (vport->phba->sli_rev == LPFC_SLI_REV4)
+		ndlp->nlp_rpi = lpfc_sli4_alloc_rpi(vport->phba);
 }
 
 struct lpfc_nodelist *
@@ -3975,7 +4046,7 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 	 * by firmware with a no rpi error.
 	 */
 	psli = &phba->sli;
-	if (ndlp->nlp_flag & NLP_RPI_VALID) {
+	if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
 		/* Now process each ring */
 		for (i = 0; i < psli->num_rings; i++) {
 			pring = &psli->ring[i];
@@ -4023,7 +4094,7 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	LPFC_MBOXQ_t    *mbox;
 	int rc;
 
-	if (ndlp->nlp_flag & NLP_RPI_VALID) {
+	if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
 		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 		if (mbox) {
 			lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox);
@@ -4035,8 +4106,9 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 		}
 		lpfc_no_rpi(phba, ndlp);
 
-		ndlp->nlp_rpi = 0;
-		ndlp->nlp_flag &= ~NLP_RPI_VALID;
+		if (phba->sli_rev != LPFC_SLI_REV4)
+			ndlp->nlp_rpi = 0;
+		ndlp->nlp_flag &= ~NLP_RPI_REGISTERED;
 		ndlp->nlp_flag &= ~NLP_NPR_ADISC;
 		return 1;
 	}
@@ -4059,11 +4131,16 @@ lpfc_unreg_hba_rpis(struct lpfc_hba *phba)
 	int i;
 
 	vports = lpfc_create_vport_work_array(phba);
+	if (!vports) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_DISCOVERY,
+			"2884 Vport array allocation failed \n");
+		return;
+	}
 	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 		shost = lpfc_shost_from_vport(vports[i]);
 		spin_lock_irq(shost->host_lock);
 		list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) {
-			if (ndlp->nlp_flag & NLP_RPI_VALID) {
+			if (ndlp->nlp_flag & NLP_RPI_REGISTERED) {
 				/* The mempool_alloc might sleep */
 				spin_unlock_irq(shost->host_lock);
 				lpfc_unreg_rpi(vports[i], ndlp);
@@ -4192,9 +4269,6 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 				kfree(mp);
 			}
 			list_del(&mb->list);
-			if (phba->sli_rev == LPFC_SLI_REV4)
-				lpfc_sli4_free_rpi(phba,
-					 mb->u.mb.un.varRegLogin.rpi);
 			mempool_free(mb, phba->mbox_mem_pool);
 			/* We shall not invoke the lpfc_nlp_put to decrement
 			 * the ndlp reference count as we are in the process
@@ -4236,15 +4310,15 @@ lpfc_nlp_remove(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 
 	lpfc_cancel_retry_delay_tmo(vport, ndlp);
 	if ((ndlp->nlp_flag & NLP_DEFER_RM) &&
-		!(ndlp->nlp_flag & NLP_REG_LOGIN_SEND) &&
-	    !(ndlp->nlp_flag & NLP_RPI_VALID)) {
+	    !(ndlp->nlp_flag & NLP_REG_LOGIN_SEND) &&
+	    !(ndlp->nlp_flag & NLP_RPI_REGISTERED)) {
 		/* For this case we need to cleanup the default rpi
 		 * allocated by the firmware.
 		 */
 		if ((mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL))
 			!= NULL) {
 			rc = lpfc_reg_rpi(phba, vport->vpi, ndlp->nlp_DID,
-			    (uint8_t *) &vport->fc_sparam, mbox, 0);
+			    (uint8_t *) &vport->fc_sparam, mbox, ndlp->nlp_rpi);
 			if (rc) {
 				mempool_free(mbox, phba->mbox_mem_pool);
 			}
@@ -4436,7 +4510,7 @@ lpfc_disc_list_loopmap(struct lpfc_vport *vport)
 	if (!lpfc_is_link_up(phba))
 		return;
 
-	if (phba->fc_topology != TOPOLOGY_LOOP)
+	if (phba->fc_topology != LPFC_TOPOLOGY_LOOP)
 		return;
 
 	/* Check for loop map present or not */
@@ -4788,7 +4862,10 @@ lpfc_disc_timeout_handler(struct lpfc_vport *vport)
 			}
 		}
 		if (vport->port_state != LPFC_FLOGI) {
-			lpfc_initial_flogi(vport);
+			if (phba->sli_rev <= LPFC_SLI_REV3)
+				lpfc_initial_flogi(vport);
+			else
+				lpfc_issue_init_vfi(vport);
 			return;
 		}
 		break;
@@ -4979,7 +5056,7 @@ lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	pmb->context2 = NULL;
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
-	ndlp->nlp_flag |= NLP_RPI_VALID;
+	ndlp->nlp_flag |= NLP_RPI_REGISTERED;
 	ndlp->nlp_type |= NLP_FABRIC;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
 
@@ -5103,6 +5180,8 @@ lpfc_nlp_release(struct kref *kref)
 	spin_lock_irqsave(&phba->ndlp_lock, flags);
 	NLP_CLR_NODE_ACT(ndlp);
 	spin_unlock_irqrestore(&phba->ndlp_lock, flags);
+	if (phba->sli_rev == LPFC_SLI_REV4)
+		lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
 
 	/* free ndlp memory for final ndlp release */
 	if (NLP_CHK_FREE_REQ(ndlp)) {
@@ -5254,6 +5333,10 @@ lpfc_fcf_inuse(struct lpfc_hba *phba)
 
 	vports = lpfc_create_vport_work_array(phba);
 
+	/* If driver cannot allocate memory, indicate fcf is in use */
+	if (!vports)
+		return 1;
+
 	for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
 		shost = lpfc_shost_from_vport(vports[i]);
 		spin_lock_irq(shost->host_lock);
@@ -5269,7 +5352,7 @@ lpfc_fcf_inuse(struct lpfc_hba *phba)
 					"logged in\n",
 					ndlp->nlp_rpi, ndlp->nlp_DID,
 					ndlp->nlp_flag);
-				if (ndlp->nlp_flag & NLP_RPI_VALID)
+				if (ndlp->nlp_flag & NLP_RPI_REGISTERED)
 					ret = 1;
 			}
 		}
@@ -5550,7 +5633,7 @@ lpfc_unregister_unused_fcf(struct lpfc_hba *phba)
 	 * registered, do nothing.
 	 */
 	spin_lock_irq(&phba->hbalock);
-	if (!(phba->hba_flag & HBA_FCOE_SUPPORT) ||
+	if (!(phba->hba_flag & HBA_FCOE_MODE) ||
 	    !(phba->fcf.fcf_flag & FCF_REGISTERED) ||
 	    !(phba->hba_flag & HBA_FIP_SUPPORT) ||
 	    (phba->fcf.fcf_flag & FCF_DISCOVERY) ||
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 9b833345646..96ed3ba6ba9 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -880,6 +880,24 @@ struct  RLS_RSP {		/* Structure is in Big Endian format */
 	uint32_t crcCnt;
 };
 
+struct RRQ {			/* Structure is in Big Endian format */
+	uint32_t rrq;
+#define rrq_rsvd_SHIFT		24
+#define rrq_rsvd_MASK		0x000000ff
+#define rrq_rsvd_WORD		rrq
+#define rrq_did_SHIFT		0
+#define rrq_did_MASK		0x00ffffff
+#define rrq_did_WORD		rrq
+	uint32_t rrq_exchg;
+#define rrq_oxid_SHIFT		16
+#define rrq_oxid_MASK		0xffff
+#define rrq_oxid_WORD		rrq_exchg
+#define rrq_rxid_SHIFT		0
+#define rrq_rxid_MASK		0xffff
+#define rrq_rxid_WORD		rrq_exchg
+};
+
+
 struct RTV_RSP {		/* Structure is in Big Endian format */
 	uint32_t ratov;
 	uint32_t edtov;
@@ -1172,7 +1190,10 @@ typedef struct {
 #define PCI_VENDOR_ID_EMULEX        0x10df
 #define PCI_DEVICE_ID_FIREFLY       0x1ae5
 #define PCI_DEVICE_ID_PROTEUS_VF    0xe100
+#define PCI_DEVICE_ID_BALIUS        0xe131
 #define PCI_DEVICE_ID_PROTEUS_PF    0xe180
+#define PCI_DEVICE_ID_LANCER_FC     0xe200
+#define PCI_DEVICE_ID_LANCER_FCOE   0xe260
 #define PCI_DEVICE_ID_SAT_SMB       0xf011
 #define PCI_DEVICE_ID_SAT_MID       0xf015
 #define PCI_DEVICE_ID_RFLY          0xf095
@@ -1189,6 +1210,7 @@ typedef struct {
 #define PCI_DEVICE_ID_SAT           0xf100
 #define PCI_DEVICE_ID_SAT_SCSP      0xf111
 #define PCI_DEVICE_ID_SAT_DCSP      0xf112
+#define PCI_DEVICE_ID_FALCON        0xf180
 #define PCI_DEVICE_ID_SUPERFLY      0xf700
 #define PCI_DEVICE_ID_DRAGONFLY     0xf800
 #define PCI_DEVICE_ID_CENTAUR       0xf900
@@ -1210,8 +1232,6 @@ typedef struct {
 #define PCI_VENDOR_ID_SERVERENGINE  0x19a2
 #define PCI_DEVICE_ID_TIGERSHARK    0x0704
 #define PCI_DEVICE_ID_TOMCAT        0x0714
-#define PCI_DEVICE_ID_FALCON        0xf180
-#define PCI_DEVICE_ID_BALIUS        0xe131
 
 #define JEDEC_ID_ADDRESS            0x0080001c
 #define FIREFLY_JEDEC_ID            0x1ACC
@@ -1368,7 +1388,6 @@ typedef struct {		/* FireFly BIU registers */
 #define MBX_READ_LNK_STAT   0x12
 #define MBX_REG_LOGIN       0x13
 #define MBX_UNREG_LOGIN     0x14
-#define MBX_READ_LA         0x15
 #define MBX_CLEAR_LA        0x16
 #define MBX_DUMP_MEMORY     0x17
 #define MBX_DUMP_CONTEXT    0x18
@@ -1402,7 +1421,7 @@ typedef struct {		/* FireFly BIU registers */
 #define MBX_READ_SPARM64    0x8D
 #define MBX_READ_RPI64      0x8F
 #define MBX_REG_LOGIN64     0x93
-#define MBX_READ_LA64       0x95
+#define MBX_READ_TOPOLOGY   0x95
 #define MBX_REG_VPI	    0x96
 #define MBX_UNREG_VPI	    0x97
 
@@ -1823,12 +1842,13 @@ typedef struct {
 #define FLAGS_IMED_ABORT             0x04000	/* Bit 14 */
 
 	uint32_t link_speed;
-#define LINK_SPEED_AUTO 0       /* Auto selection */
-#define LINK_SPEED_1G   1       /* 1 Gigabaud */
-#define LINK_SPEED_2G   2       /* 2 Gigabaud */
-#define LINK_SPEED_4G   4       /* 4 Gigabaud */
-#define LINK_SPEED_8G   8       /* 8 Gigabaud */
-#define LINK_SPEED_10G   16      /* 10 Gigabaud */
+#define LINK_SPEED_AUTO 0x0     /* Auto selection */
+#define LINK_SPEED_1G   0x1     /* 1 Gigabaud */
+#define LINK_SPEED_2G   0x2     /* 2 Gigabaud */
+#define LINK_SPEED_4G   0x4     /* 4 Gigabaud */
+#define LINK_SPEED_8G   0x8     /* 8 Gigabaud */
+#define LINK_SPEED_10G  0x10    /* 10 Gigabaud */
+#define LINK_SPEED_16G  0x11    /* 16 Gigabaud */
 
 } INIT_LINK_VAR;
 
@@ -1999,6 +2019,7 @@ typedef struct {
 #define LMT_4Gb       0x040
 #define LMT_8Gb       0x080
 #define LMT_10Gb      0x100
+#define LMT_16Gb      0x200
 	uint32_t rsvd2;
 	uint32_t rsvd3;
 	uint32_t max_xri;
@@ -2394,100 +2415,93 @@ typedef struct {
 #endif
 } UNREG_D_ID_VAR;
 
-/* Structure for MB Command READ_LA (21) */
-/* Structure for MB Command READ_LA64 (0x95) */
-
-typedef struct {
+/* Structure for MB Command READ_TOPOLOGY (0x95) */
+struct lpfc_mbx_read_top {
 	uint32_t eventTag;	/* Event tag */
-#ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t rsvd1:19;
-	uint32_t fa:1;
-	uint32_t mm:1;		/* Menlo Maintenance mode enabled */
-	uint32_t rx:1;
-	uint32_t pb:1;
-	uint32_t il:1;
-	uint32_t attType:8;
-#else	/*  __LITTLE_ENDIAN_BITFIELD */
-	uint32_t attType:8;
-	uint32_t il:1;
-	uint32_t pb:1;
-	uint32_t rx:1;
-	uint32_t mm:1;
-	uint32_t fa:1;
-	uint32_t rsvd1:19;
-#endif
-
-#define AT_RESERVED    0x00	/* Reserved - attType */
-#define AT_LINK_UP     0x01	/* Link is up */
-#define AT_LINK_DOWN   0x02	/* Link is down */
-
-#ifdef __BIG_ENDIAN_BITFIELD
-	uint8_t granted_AL_PA;
-	uint8_t lipAlPs;
-	uint8_t lipType;
-	uint8_t topology;
-#else	/*  __LITTLE_ENDIAN_BITFIELD */
-	uint8_t topology;
-	uint8_t lipType;
-	uint8_t lipAlPs;
-	uint8_t granted_AL_PA;
-#endif
-
-#define TOPOLOGY_PT_PT 0x01	/* Topology is pt-pt / pt-fabric */
-#define TOPOLOGY_LOOP  0x02	/* Topology is FC-AL */
-#define TOPOLOGY_LNK_MENLO_MAINTENANCE 0x05 /* maint mode zephtr to menlo */
-
-	union {
-		struct ulp_bde lilpBde; /* This BDE points to a 128 byte buffer
-					   to */
-		/* store the LILP AL_PA position map into */
-		struct ulp_bde64 lilpBde64;
-	} un;
-
-#ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t Dlu:1;
-	uint32_t Dtf:1;
-	uint32_t Drsvd2:14;
-	uint32_t DlnkSpeed:8;
-	uint32_t DnlPort:4;
-	uint32_t Dtx:2;
-	uint32_t Drx:2;
-#else	/*  __LITTLE_ENDIAN_BITFIELD */
-	uint32_t Drx:2;
-	uint32_t Dtx:2;
-	uint32_t DnlPort:4;
-	uint32_t DlnkSpeed:8;
-	uint32_t Drsvd2:14;
-	uint32_t Dtf:1;
-	uint32_t Dlu:1;
-#endif
-
-#ifdef __BIG_ENDIAN_BITFIELD
-	uint32_t Ulu:1;
-	uint32_t Utf:1;
-	uint32_t Ursvd2:14;
-	uint32_t UlnkSpeed:8;
-	uint32_t UnlPort:4;
-	uint32_t Utx:2;
-	uint32_t Urx:2;
-#else	/*  __LITTLE_ENDIAN_BITFIELD */
-	uint32_t Urx:2;
-	uint32_t Utx:2;
-	uint32_t UnlPort:4;
-	uint32_t UlnkSpeed:8;
-	uint32_t Ursvd2:14;
-	uint32_t Utf:1;
-	uint32_t Ulu:1;
-#endif
-
-#define LA_UNKNW_LINK  0x0    /* lnkSpeed */
-#define LA_1GHZ_LINK   0x04   /* lnkSpeed */
-#define LA_2GHZ_LINK   0x08   /* lnkSpeed */
-#define LA_4GHZ_LINK   0x10   /* lnkSpeed */
-#define LA_8GHZ_LINK   0x20   /* lnkSpeed */
-#define LA_10GHZ_LINK  0x40   /* lnkSpeed */
-
-} READ_LA_VAR;
+	uint32_t word2;
+#define lpfc_mbx_read_top_fa_SHIFT		12
+#define lpfc_mbx_read_top_fa_MASK		0x00000001
+#define lpfc_mbx_read_top_fa_WORD		word2
+#define lpfc_mbx_read_top_mm_SHIFT		11
+#define lpfc_mbx_read_top_mm_MASK		0x00000001
+#define lpfc_mbx_read_top_mm_WORD		word2
+#define lpfc_mbx_read_top_pb_SHIFT		9
+#define lpfc_mbx_read_top_pb_MASK		0X00000001
+#define lpfc_mbx_read_top_pb_WORD		word2
+#define lpfc_mbx_read_top_il_SHIFT		8
+#define lpfc_mbx_read_top_il_MASK		0x00000001
+#define lpfc_mbx_read_top_il_WORD		word2
+#define lpfc_mbx_read_top_att_type_SHIFT	0
+#define lpfc_mbx_read_top_att_type_MASK		0x000000FF
+#define lpfc_mbx_read_top_att_type_WORD		word2
+#define LPFC_ATT_RESERVED    0x00	/* Reserved - attType */
+#define LPFC_ATT_LINK_UP     0x01	/* Link is up */
+#define LPFC_ATT_LINK_DOWN   0x02	/* Link is down */
+	uint32_t word3;
+#define lpfc_mbx_read_top_alpa_granted_SHIFT	24
+#define lpfc_mbx_read_top_alpa_granted_MASK	0x000000FF
+#define lpfc_mbx_read_top_alpa_granted_WORD	word3
+#define lpfc_mbx_read_top_lip_alps_SHIFT	16
+#define lpfc_mbx_read_top_lip_alps_MASK		0x000000FF
+#define lpfc_mbx_read_top_lip_alps_WORD		word3
+#define lpfc_mbx_read_top_lip_type_SHIFT	8
+#define lpfc_mbx_read_top_lip_type_MASK		0x000000FF
+#define lpfc_mbx_read_top_lip_type_WORD		word3
+#define lpfc_mbx_read_top_topology_SHIFT	0
+#define lpfc_mbx_read_top_topology_MASK		0x000000FF
+#define lpfc_mbx_read_top_topology_WORD		word3
+#define LPFC_TOPOLOGY_PT_PT 0x01	/* Topology is pt-pt / pt-fabric */
+#define LPFC_TOPOLOGY_LOOP  0x02	/* Topology is FC-AL */
+#define LPFC_TOPOLOGY_MM    0x05	/* maint mode zephtr to menlo */
+	/* store the LILP AL_PA position map into */
+	struct ulp_bde64 lilpBde64;
+#define LPFC_ALPA_MAP_SIZE	128
+	uint32_t word7;
+#define lpfc_mbx_read_top_ld_lu_SHIFT		31
+#define lpfc_mbx_read_top_ld_lu_MASK		0x00000001
+#define lpfc_mbx_read_top_ld_lu_WORD		word7
+#define lpfc_mbx_read_top_ld_tf_SHIFT		30
+#define lpfc_mbx_read_top_ld_tf_MASK		0x00000001
+#define lpfc_mbx_read_top_ld_tf_WORD		word7
+#define lpfc_mbx_read_top_ld_link_spd_SHIFT	8
+#define lpfc_mbx_read_top_ld_link_spd_MASK	0x000000FF
+#define lpfc_mbx_read_top_ld_link_spd_WORD	word7
+#define lpfc_mbx_read_top_ld_nl_port_SHIFT	4
+#define lpfc_mbx_read_top_ld_nl_port_MASK	0x0000000F
+#define lpfc_mbx_read_top_ld_nl_port_WORD	word7
+#define lpfc_mbx_read_top_ld_tx_SHIFT		2
+#define lpfc_mbx_read_top_ld_tx_MASK		0x00000003
+#define lpfc_mbx_read_top_ld_tx_WORD		word7
+#define lpfc_mbx_read_top_ld_rx_SHIFT		0
+#define lpfc_mbx_read_top_ld_rx_MASK		0x00000003
+#define lpfc_mbx_read_top_ld_rx_WORD		word7
+	uint32_t word8;
+#define lpfc_mbx_read_top_lu_SHIFT		31
+#define lpfc_mbx_read_top_lu_MASK		0x00000001
+#define lpfc_mbx_read_top_lu_WORD		word8
+#define lpfc_mbx_read_top_tf_SHIFT		30
+#define lpfc_mbx_read_top_tf_MASK		0x00000001
+#define lpfc_mbx_read_top_tf_WORD		word8
+#define lpfc_mbx_read_top_link_spd_SHIFT	8
+#define lpfc_mbx_read_top_link_spd_MASK		0x000000FF
+#define lpfc_mbx_read_top_link_spd_WORD		word8
+#define lpfc_mbx_read_top_nl_port_SHIFT		4
+#define lpfc_mbx_read_top_nl_port_MASK		0x0000000F
+#define lpfc_mbx_read_top_nl_port_WORD		word8
+#define lpfc_mbx_read_top_tx_SHIFT		2
+#define lpfc_mbx_read_top_tx_MASK		0x00000003
+#define lpfc_mbx_read_top_tx_WORD		word8
+#define lpfc_mbx_read_top_rx_SHIFT		0
+#define lpfc_mbx_read_top_rx_MASK		0x00000003
+#define lpfc_mbx_read_top_rx_WORD		word8
+#define LPFC_LINK_SPEED_UNKNOWN	0x0
+#define LPFC_LINK_SPEED_1GHZ	0x04
+#define LPFC_LINK_SPEED_2GHZ	0x08
+#define LPFC_LINK_SPEED_4GHZ	0x10
+#define LPFC_LINK_SPEED_8GHZ	0x20
+#define LPFC_LINK_SPEED_10GHZ	0x40
+#define LPFC_LINK_SPEED_16GHZ	0x80
+};
 
 /* Structure for MB Command CLEAR_LA (22) */
 
@@ -3016,7 +3030,6 @@ typedef union {
 	READ_LNK_VAR varRdLnk;		/* cmd = 18 (READ_LNK_STAT)  */
 	REG_LOGIN_VAR varRegLogin;	/* cmd = 19 (REG_LOGIN(64))  */
 	UNREG_LOGIN_VAR varUnregLogin;	/* cmd = 20 (UNREG_LOGIN)    */
-	READ_LA_VAR varReadLA;		/* cmd = 21 (READ_LA(64))    */
 	CLEAR_LA_VAR varClearLA;	/* cmd = 22 (CLEAR_LA)       */
 	DUMP_VAR varDmp;		/* Warm Start DUMP mbx cmd   */
 	UNREG_D_ID_VAR varUnregDID;	/* cmd = 0x23 (UNREG_D_ID)   */
@@ -3026,6 +3039,7 @@ typedef union {
 	struct config_hbq_var varCfgHbq;/* cmd = 0x7c (CONFIG_HBQ)  */
 	struct update_cfg_var varUpdateCfg; /* cmd = 0x1B (UPDATE_CFG)*/
 	CONFIG_PORT_VAR varCfgPort;	/* cmd = 0x88 (CONFIG_PORT)  */
+	struct lpfc_mbx_read_top varReadTop; /* cmd = 0x95 (READ_TOPOLOGY) */
 	REG_VPI_VAR varRegVpi;		/* cmd = 0x96 (REG_VPI) */
 	UNREG_VPI_VAR varUnregVpi;	/* cmd = 0x97 (UNREG_VPI) */
 	ASYNCEVT_ENABLE_VAR varCfgAsyncEvent; /*cmd = x33 (CONFIG_ASYNC) */
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 6e4bc34e1d0..94c1aa1136d 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -64,29 +64,39 @@ struct lpfc_sli_intf {
 #define lpfc_sli_intf_valid_MASK		0x00000007
 #define lpfc_sli_intf_valid_WORD		word0
 #define LPFC_SLI_INTF_VALID		6
-#define lpfc_sli_intf_featurelevel2_SHIFT	24
-#define lpfc_sli_intf_featurelevel2_MASK	0x0000001F
-#define lpfc_sli_intf_featurelevel2_WORD	word0
-#define lpfc_sli_intf_featurelevel1_SHIFT	16
-#define lpfc_sli_intf_featurelevel1_MASK	0x000000FF
-#define lpfc_sli_intf_featurelevel1_WORD	word0
-#define LPFC_SLI_INTF_FEATURELEVEL1_1	1
-#define LPFC_SLI_INTF_FEATURELEVEL1_2	2
+#define lpfc_sli_intf_sli_hint2_SHIFT		24
+#define lpfc_sli_intf_sli_hint2_MASK		0x0000001F
+#define lpfc_sli_intf_sli_hint2_WORD		word0
+#define LPFC_SLI_INTF_SLI_HINT2_NONE	0
+#define lpfc_sli_intf_sli_hint1_SHIFT		16
+#define lpfc_sli_intf_sli_hint1_MASK		0x000000FF
+#define lpfc_sli_intf_sli_hint1_WORD		word0
+#define LPFC_SLI_INTF_SLI_HINT1_NONE	0
+#define LPFC_SLI_INTF_SLI_HINT1_1	1
+#define LPFC_SLI_INTF_SLI_HINT1_2	2
+#define lpfc_sli_intf_if_type_SHIFT		12
+#define lpfc_sli_intf_if_type_MASK		0x0000000F
+#define lpfc_sli_intf_if_type_WORD		word0
+#define LPFC_SLI_INTF_IF_TYPE_0		0
+#define LPFC_SLI_INTF_IF_TYPE_1		1
+#define LPFC_SLI_INTF_IF_TYPE_2		2
 #define lpfc_sli_intf_sli_family_SHIFT		8
-#define lpfc_sli_intf_sli_family_MASK		0x000000FF
+#define lpfc_sli_intf_sli_family_MASK		0x0000000F
 #define lpfc_sli_intf_sli_family_WORD		word0
-#define LPFC_SLI_INTF_FAMILY_BE2	0
-#define LPFC_SLI_INTF_FAMILY_BE3	1
+#define LPFC_SLI_INTF_FAMILY_BE2	0x0
+#define LPFC_SLI_INTF_FAMILY_BE3	0x1
+#define LPFC_SLI_INTF_FAMILY_LNCR_A0	0xa
+#define LPFC_SLI_INTF_FAMILY_LNCR_B0	0xb
 #define lpfc_sli_intf_slirev_SHIFT		4
 #define lpfc_sli_intf_slirev_MASK		0x0000000F
 #define lpfc_sli_intf_slirev_WORD		word0
 #define LPFC_SLI_INTF_REV_SLI3		3
 #define LPFC_SLI_INTF_REV_SLI4		4
-#define lpfc_sli_intf_if_type_SHIFT		0
-#define lpfc_sli_intf_if_type_MASK		0x00000007
-#define lpfc_sli_intf_if_type_WORD		word0
-#define LPFC_SLI_INTF_IF_TYPE_0		0
-#define LPFC_SLI_INTF_IF_TYPE_1		1
+#define lpfc_sli_intf_func_type_SHIFT		0
+#define lpfc_sli_intf_func_type_MASK		0x00000001
+#define lpfc_sli_intf_func_type_WORD		word0
+#define LPFC_SLI_INTF_IF_TYPE_PHYS	0
+#define LPFC_SLI_INTF_IF_TYPE_VIRT	1
 };
 
 #define LPFC_SLI4_MBX_EMBED	true
@@ -450,35 +460,40 @@ struct lpfc_register {
 	uint32_t word0;
 };
 
+/* The following BAR0 Registers apply to SLI4 if_type 0 UCNAs. */
 #define LPFC_UERR_STATUS_HI		0x00A4
 #define LPFC_UERR_STATUS_LO		0x00A0
 #define LPFC_UE_MASK_HI			0x00AC
 #define LPFC_UE_MASK_LO			0x00A8
+
+/* The following BAR0 register sets are defined for if_type 0 and 2 UCNAs. */
 #define LPFC_SLI_INTF			0x0058
 
-/* BAR0 Registers */
-#define LPFC_HST_STATE			0x00AC
-#define lpfc_hst_state_perr_SHIFT	31
-#define lpfc_hst_state_perr_MASK	0x1
-#define lpfc_hst_state_perr_WORD	word0
-#define lpfc_hst_state_sfi_SHIFT	30
-#define lpfc_hst_state_sfi_MASK		0x1
-#define lpfc_hst_state_sfi_WORD		word0
-#define lpfc_hst_state_nip_SHIFT	29
-#define lpfc_hst_state_nip_MASK		0x1
-#define lpfc_hst_state_nip_WORD		word0
-#define lpfc_hst_state_ipc_SHIFT	28
-#define lpfc_hst_state_ipc_MASK		0x1
-#define lpfc_hst_state_ipc_WORD		word0
-#define lpfc_hst_state_xrom_SHIFT	27
-#define lpfc_hst_state_xrom_MASK	0x1
-#define lpfc_hst_state_xrom_WORD	word0
-#define lpfc_hst_state_dl_SHIFT		26
-#define lpfc_hst_state_dl_MASK		0x1
-#define lpfc_hst_state_dl_WORD		word0
-#define lpfc_hst_state_port_status_SHIFT	0
-#define lpfc_hst_state_port_status_MASK		0xFFFF
-#define lpfc_hst_state_port_status_WORD		word0
+#define LPFC_SLIPORT_IF2_SMPHR		0x0400
+#define lpfc_port_smphr_perr_SHIFT	31
+#define lpfc_port_smphr_perr_MASK	0x1
+#define lpfc_port_smphr_perr_WORD	word0
+#define lpfc_port_smphr_sfi_SHIFT	30
+#define lpfc_port_smphr_sfi_MASK	0x1
+#define lpfc_port_smphr_sfi_WORD	word0
+#define lpfc_port_smphr_nip_SHIFT	29
+#define lpfc_port_smphr_nip_MASK	0x1
+#define lpfc_port_smphr_nip_WORD	word0
+#define lpfc_port_smphr_ipc_SHIFT	28
+#define lpfc_port_smphr_ipc_MASK	0x1
+#define lpfc_port_smphr_ipc_WORD	word0
+#define lpfc_port_smphr_scr1_SHIFT	27
+#define lpfc_port_smphr_scr1_MASK	0x1
+#define lpfc_port_smphr_scr1_WORD	word0
+#define lpfc_port_smphr_scr2_SHIFT	26
+#define lpfc_port_smphr_scr2_MASK	0x1
+#define lpfc_port_smphr_scr2_WORD	word0
+#define lpfc_port_smphr_host_scratch_SHIFT	16
+#define lpfc_port_smphr_host_scratch_MASK	0xFF
+#define lpfc_port_smphr_host_scratch_WORD	word0
+#define lpfc_port_smphr_port_status_SHIFT	0
+#define lpfc_port_smphr_port_status_MASK	0xFFFF
+#define lpfc_port_smphr_port_status_WORD	word0
 
 #define LPFC_POST_STAGE_POWER_ON_RESET			0x0000
 #define LPFC_POST_STAGE_AWAITING_HOST_RDY		0x0001
@@ -511,10 +526,46 @@ struct lpfc_register {
 #define LPFC_POST_STAGE_RC_DONE				0x0B07
 #define LPFC_POST_STAGE_REBOOT_SYSTEM			0x0B08
 #define LPFC_POST_STAGE_MAC_ADDRESS			0x0C00
-#define LPFC_POST_STAGE_ARMFW_READY			0xC000
-#define LPFC_POST_STAGE_ARMFW_UE 			0xF000
+#define LPFC_POST_STAGE_PORT_READY			0xC000
+#define LPFC_POST_STAGE_PORT_UE 			0xF000
+
+#define LPFC_SLIPORT_STATUS		0x0404
+#define lpfc_sliport_status_err_SHIFT	31
+#define lpfc_sliport_status_err_MASK	0x1
+#define lpfc_sliport_status_err_WORD	word0
+#define lpfc_sliport_status_end_SHIFT	30
+#define lpfc_sliport_status_end_MASK	0x1
+#define lpfc_sliport_status_end_WORD	word0
+#define lpfc_sliport_status_oti_SHIFT	29
+#define lpfc_sliport_status_oti_MASK	0x1
+#define lpfc_sliport_status_oti_WORD	word0
+#define lpfc_sliport_status_rn_SHIFT	24
+#define lpfc_sliport_status_rn_MASK	0x1
+#define lpfc_sliport_status_rn_WORD	word0
+#define lpfc_sliport_status_rdy_SHIFT	23
+#define lpfc_sliport_status_rdy_MASK	0x1
+#define lpfc_sliport_status_rdy_WORD	word0
+#define MAX_IF_TYPE_2_RESETS	1000
+
+#define LPFC_SLIPORT_CNTRL		0x0408
+#define lpfc_sliport_ctrl_end_SHIFT	30
+#define lpfc_sliport_ctrl_end_MASK	0x1
+#define lpfc_sliport_ctrl_end_WORD	word0
+#define LPFC_SLIPORT_LITTLE_ENDIAN 0
+#define LPFC_SLIPORT_BIG_ENDIAN	   1
+#define lpfc_sliport_ctrl_ip_SHIFT	27
+#define lpfc_sliport_ctrl_ip_MASK	0x1
+#define lpfc_sliport_ctrl_ip_WORD	word0
+#define LPFC_SLIPORT_INIT_PORT	1
+
+#define LPFC_SLIPORT_ERR_1		0x040C
+#define LPFC_SLIPORT_ERR_2		0x0410
+
+/* The following Registers apply to SLI4 if_type 0 UCNAs. They typically
+ * reside in BAR 2.
+ */
+#define LPFC_SLIPORT_IF0_SMPHR	0x00AC
 
-/* BAR1 Registers */
 #define LPFC_IMR_MASK_ALL	0xFFFFFFFF
 #define LPFC_ISCR_CLEAR_ALL	0xFFFFFFFF
 
@@ -569,14 +620,21 @@ struct lpfc_register {
 #define LPFC_SLI4_INTR30		BIT30
 #define LPFC_SLI4_INTR31		BIT31
 
-/* BAR2 Registers */
+/*
+ * The Doorbell registers defined here exist in different BAR
+ * register sets depending on the UCNA Port's reported if_type
+ * value.  For UCNA ports running SLI4 and if_type 0, they reside in
+ * BAR4.  For UCNA ports running SLI4 and if_type 2, they reside in
+ * BAR0.  The offsets are the same so the driver must account for
+ * any base address difference.
+ */
 #define LPFC_RQ_DOORBELL		0x00A0
 #define lpfc_rq_doorbell_num_posted_SHIFT	16
 #define lpfc_rq_doorbell_num_posted_MASK	0x3FFF
 #define lpfc_rq_doorbell_num_posted_WORD	word0
 #define LPFC_RQ_POST_BATCH		8	/* RQEs to post at one time */
 #define lpfc_rq_doorbell_id_SHIFT		0
-#define lpfc_rq_doorbell_id_MASK		0x03FF
+#define lpfc_rq_doorbell_id_MASK		0xFFFF
 #define lpfc_rq_doorbell_id_WORD		word0
 
 #define LPFC_WQ_DOORBELL		0x0040
@@ -591,6 +649,11 @@ struct lpfc_register {
 #define lpfc_wq_doorbell_id_WORD		word0
 
 #define LPFC_EQCQ_DOORBELL		0x0120
+#define lpfc_eqcq_doorbell_se_SHIFT		31
+#define lpfc_eqcq_doorbell_se_MASK		0x0001
+#define lpfc_eqcq_doorbell_se_WORD		word0
+#define LPFC_EQCQ_SOLICIT_ENABLE_OFF	0
+#define LPFC_EQCQ_SOLICIT_ENABLE_ON	1
 #define lpfc_eqcq_doorbell_arm_SHIFT		29
 #define lpfc_eqcq_doorbell_arm_MASK		0x0001
 #define lpfc_eqcq_doorbell_arm_WORD		word0
@@ -628,7 +691,7 @@ struct lpfc_register {
 #define lpfc_mq_doorbell_num_posted_MASK	0x3FFF
 #define lpfc_mq_doorbell_num_posted_WORD	word0
 #define lpfc_mq_doorbell_id_SHIFT		0
-#define lpfc_mq_doorbell_id_MASK		0x03FF
+#define lpfc_mq_doorbell_id_MASK		0xFFFF
 #define lpfc_mq_doorbell_id_WORD		word0
 
 struct lpfc_sli4_cfg_mhdr {
@@ -1048,12 +1111,18 @@ struct lpfc_mbx_mq_create_ext {
 #define lpfc_mbx_mq_create_ext_async_evt_link_SHIFT	LPFC_TRAILER_CODE_LINK
 #define lpfc_mbx_mq_create_ext_async_evt_link_MASK	0x00000001
 #define lpfc_mbx_mq_create_ext_async_evt_link_WORD	async_evt_bmap
-#define lpfc_mbx_mq_create_ext_async_evt_fcfste_SHIFT	LPFC_TRAILER_CODE_FCOE
-#define lpfc_mbx_mq_create_ext_async_evt_fcfste_MASK	0x00000001
-#define lpfc_mbx_mq_create_ext_async_evt_fcfste_WORD	async_evt_bmap
+#define lpfc_mbx_mq_create_ext_async_evt_fip_SHIFT	LPFC_TRAILER_CODE_FCOE
+#define lpfc_mbx_mq_create_ext_async_evt_fip_MASK	0x00000001
+#define lpfc_mbx_mq_create_ext_async_evt_fip_WORD	async_evt_bmap
 #define lpfc_mbx_mq_create_ext_async_evt_group5_SHIFT	LPFC_TRAILER_CODE_GRP5
 #define lpfc_mbx_mq_create_ext_async_evt_group5_MASK	0x00000001
 #define lpfc_mbx_mq_create_ext_async_evt_group5_WORD	async_evt_bmap
+#define lpfc_mbx_mq_create_ext_async_evt_fc_SHIFT	LPFC_TRAILER_CODE_FC
+#define lpfc_mbx_mq_create_ext_async_evt_fc_MASK	0x00000001
+#define lpfc_mbx_mq_create_ext_async_evt_fc_WORD	async_evt_bmap
+#define lpfc_mbx_mq_create_ext_async_evt_sli_SHIFT	LPFC_TRAILER_CODE_SLI
+#define lpfc_mbx_mq_create_ext_async_evt_sli_MASK	0x00000001
+#define lpfc_mbx_mq_create_ext_async_evt_sli_WORD	async_evt_bmap
 			struct mq_context context;
 			struct dma_address page[LPFC_MAX_MQ_PAGE];
 		} request;
@@ -1307,7 +1376,7 @@ struct lpfc_mbx_query_fw_cfg {
 #define lpfc_function_mode_dal_WORD		function_mode
 #define lpfc_function_mode_lro_SHIFT		9
 #define lpfc_function_mode_lro_MASK		0x00000001
-#define lpfc_function_mode_lro_WORD		function_mode9
+#define lpfc_function_mode_lro_WORD		function_mode
 #define lpfc_function_mode_flex10_SHIFT		10
 #define lpfc_function_mode_flex10_MASK		0x00000001
 #define lpfc_function_mode_flex10_WORD		function_mode
@@ -1358,10 +1427,16 @@ struct lpfc_mbx_init_vfi {
 #define lpfc_init_vfi_vf_SHIFT		29
 #define lpfc_init_vfi_vf_MASK		0x00000001
 #define lpfc_init_vfi_vf_WORD		word1
+#define lpfc_init_vfi_vp_SHIFT		28
+#define lpfc_init_vfi_vp_MASK		0x00000001
+#define lpfc_init_vfi_vp_WORD		word1
 #define lpfc_init_vfi_vfi_SHIFT		0
 #define lpfc_init_vfi_vfi_MASK		0x0000FFFF
 #define lpfc_init_vfi_vfi_WORD		word1
 	uint32_t word2;
+#define lpfc_init_vfi_vpi_SHIFT		16
+#define lpfc_init_vfi_vpi_MASK		0x0000FFFF
+#define lpfc_init_vfi_vpi_WORD		word2
 #define lpfc_init_vfi_fcfi_SHIFT	0
 #define lpfc_init_vfi_fcfi_MASK		0x0000FFFF
 #define lpfc_init_vfi_fcfi_WORD		word2
@@ -2069,6 +2144,8 @@ struct lpfc_mcqe {
 #define LPFC_TRAILER_CODE_FCOE	0x2
 #define LPFC_TRAILER_CODE_DCBX	0x3
 #define LPFC_TRAILER_CODE_GRP5	0x5
+#define LPFC_TRAILER_CODE_FC	0x10
+#define LPFC_TRAILER_CODE_SLI	0x11
 };
 
 struct lpfc_acqe_link {
@@ -2094,11 +2171,12 @@ struct lpfc_acqe_link {
 #define LPFC_ASYNC_LINK_STATUS_UP		0x1
 #define LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN	0x2
 #define LPFC_ASYNC_LINK_STATUS_LOGICAL_UP	0x3
-#define lpfc_acqe_link_physical_SHIFT		0
-#define lpfc_acqe_link_physical_MASK		0x000000FF
-#define lpfc_acqe_link_physical_WORD		word0
-#define LPFC_ASYNC_LINK_PORT_A			0x0
-#define LPFC_ASYNC_LINK_PORT_B			0x1
+#define lpfc_acqe_link_type_SHIFT		6
+#define lpfc_acqe_link_type_MASK		0x00000003
+#define lpfc_acqe_link_type_WORD		word0
+#define lpfc_acqe_link_number_SHIFT		0
+#define lpfc_acqe_link_number_MASK		0x0000003F
+#define lpfc_acqe_link_number_WORD		word0
 	uint32_t word1;
 #define lpfc_acqe_link_fault_SHIFT	0
 #define lpfc_acqe_link_fault_MASK	0x000000FF
@@ -2106,29 +2184,31 @@ struct lpfc_acqe_link {
 #define LPFC_ASYNC_LINK_FAULT_NONE	0x0
 #define LPFC_ASYNC_LINK_FAULT_LOCAL	0x1
 #define LPFC_ASYNC_LINK_FAULT_REMOTE	0x2
-#define lpfc_acqe_qos_link_speed_SHIFT	16
-#define lpfc_acqe_qos_link_speed_MASK	0x0000FFFF
-#define lpfc_acqe_qos_link_speed_WORD	word1
+#define lpfc_acqe_logical_link_speed_SHIFT	16
+#define lpfc_acqe_logical_link_speed_MASK	0x0000FFFF
+#define lpfc_acqe_logical_link_speed_WORD	word1
 	uint32_t event_tag;
 	uint32_t trailer;
+#define LPFC_LINK_EVENT_TYPE_PHYSICAL	0x0
+#define LPFC_LINK_EVENT_TYPE_VIRTUAL	0x1
 };
 
-struct lpfc_acqe_fcoe {
+struct lpfc_acqe_fip {
 	uint32_t index;
 	uint32_t word1;
-#define lpfc_acqe_fcoe_fcf_count_SHIFT		0
-#define lpfc_acqe_fcoe_fcf_count_MASK		0x0000FFFF
-#define lpfc_acqe_fcoe_fcf_count_WORD		word1
-#define lpfc_acqe_fcoe_event_type_SHIFT		16
-#define lpfc_acqe_fcoe_event_type_MASK		0x0000FFFF
-#define lpfc_acqe_fcoe_event_type_WORD		word1
-#define LPFC_FCOE_EVENT_TYPE_NEW_FCF		0x1
-#define LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL	0x2
-#define LPFC_FCOE_EVENT_TYPE_FCF_DEAD		0x3
-#define LPFC_FCOE_EVENT_TYPE_CVL		0x4
-#define LPFC_FCOE_EVENT_TYPE_FCF_PARAM_MOD	0x5
+#define lpfc_acqe_fip_fcf_count_SHIFT		0
+#define lpfc_acqe_fip_fcf_count_MASK		0x0000FFFF
+#define lpfc_acqe_fip_fcf_count_WORD		word1
+#define lpfc_acqe_fip_event_type_SHIFT		16
+#define lpfc_acqe_fip_event_type_MASK		0x0000FFFF
+#define lpfc_acqe_fip_event_type_WORD		word1
 	uint32_t event_tag;
 	uint32_t trailer;
+#define LPFC_FIP_EVENT_TYPE_NEW_FCF		0x1
+#define LPFC_FIP_EVENT_TYPE_FCF_TABLE_FULL	0x2
+#define LPFC_FIP_EVENT_TYPE_FCF_DEAD		0x3
+#define LPFC_FIP_EVENT_TYPE_CVL			0x4
+#define LPFC_FIP_EVENT_TYPE_FCF_PARAM_MOD	0x5
 };
 
 struct lpfc_acqe_dcbx {
@@ -2140,9 +2220,12 @@ struct lpfc_acqe_dcbx {
 
 struct lpfc_acqe_grp5 {
 	uint32_t word0;
-#define lpfc_acqe_grp5_pport_SHIFT	0
-#define lpfc_acqe_grp5_pport_MASK	0x000000FF
-#define lpfc_acqe_grp5_pport_WORD	word0
+#define lpfc_acqe_grp5_type_SHIFT		6
+#define lpfc_acqe_grp5_type_MASK		0x00000003
+#define lpfc_acqe_grp5_type_WORD		word0
+#define lpfc_acqe_grp5_number_SHIFT		0
+#define lpfc_acqe_grp5_number_MASK		0x0000003F
+#define lpfc_acqe_grp5_number_WORD		word0
 	uint32_t word1;
 #define lpfc_acqe_grp5_llink_spd_SHIFT	16
 #define lpfc_acqe_grp5_llink_spd_MASK	0x0000FFFF
@@ -2151,6 +2234,68 @@ struct lpfc_acqe_grp5 {
 	uint32_t trailer;
 };
 
+struct lpfc_acqe_fc_la {
+	uint32_t word0;
+#define lpfc_acqe_fc_la_speed_SHIFT		24
+#define lpfc_acqe_fc_la_speed_MASK		0x000000FF
+#define lpfc_acqe_fc_la_speed_WORD		word0
+#define LPFC_FC_LA_SPEED_UNKOWN		0x0
+#define LPFC_FC_LA_SPEED_1G		0x1
+#define LPFC_FC_LA_SPEED_2G		0x2
+#define LPFC_FC_LA_SPEED_4G		0x4
+#define LPFC_FC_LA_SPEED_8G		0x8
+#define LPFC_FC_LA_SPEED_10G		0xA
+#define LPFC_FC_LA_SPEED_16G		0x10
+#define lpfc_acqe_fc_la_topology_SHIFT		16
+#define lpfc_acqe_fc_la_topology_MASK		0x000000FF
+#define lpfc_acqe_fc_la_topology_WORD		word0
+#define LPFC_FC_LA_TOP_UNKOWN		0x0
+#define LPFC_FC_LA_TOP_P2P		0x1
+#define LPFC_FC_LA_TOP_FCAL		0x2
+#define LPFC_FC_LA_TOP_INTERNAL_LOOP	0x3
+#define LPFC_FC_LA_TOP_SERDES_LOOP	0x4
+#define lpfc_acqe_fc_la_att_type_SHIFT		8
+#define lpfc_acqe_fc_la_att_type_MASK		0x000000FF
+#define lpfc_acqe_fc_la_att_type_WORD		word0
+#define LPFC_FC_LA_TYPE_LINK_UP		0x1
+#define LPFC_FC_LA_TYPE_LINK_DOWN	0x2
+#define LPFC_FC_LA_TYPE_NO_HARD_ALPA	0x3
+#define lpfc_acqe_fc_la_port_type_SHIFT		6
+#define lpfc_acqe_fc_la_port_type_MASK		0x00000003
+#define lpfc_acqe_fc_la_port_type_WORD		word0
+#define LPFC_LINK_TYPE_ETHERNET		0x0
+#define LPFC_LINK_TYPE_FC		0x1
+#define lpfc_acqe_fc_la_port_number_SHIFT	0
+#define lpfc_acqe_fc_la_port_number_MASK	0x0000003F
+#define lpfc_acqe_fc_la_port_number_WORD	word0
+	uint32_t word1;
+#define lpfc_acqe_fc_la_llink_spd_SHIFT		16
+#define lpfc_acqe_fc_la_llink_spd_MASK		0x0000FFFF
+#define lpfc_acqe_fc_la_llink_spd_WORD		word1
+#define lpfc_acqe_fc_la_fault_SHIFT		0
+#define lpfc_acqe_fc_la_fault_MASK		0x000000FF
+#define lpfc_acqe_fc_la_fault_WORD		word1
+#define LPFC_FC_LA_FAULT_NONE		0x0
+#define LPFC_FC_LA_FAULT_LOCAL		0x1
+#define LPFC_FC_LA_FAULT_REMOTE		0x2
+	uint32_t event_tag;
+	uint32_t trailer;
+#define LPFC_FC_LA_EVENT_TYPE_FC_LINK		0x1
+#define LPFC_FC_LA_EVENT_TYPE_SHARED_LINK	0x2
+};
+
+struct lpfc_acqe_sli {
+	uint32_t event_data1;
+	uint32_t event_data2;
+	uint32_t reserved;
+	uint32_t trailer;
+#define LPFC_SLI_EVENT_TYPE_PORT_ERROR		0x1
+#define LPFC_SLI_EVENT_TYPE_OVER_TEMP		0x2
+#define LPFC_SLI_EVENT_TYPE_NORM_TEMP		0x3
+#define LPFC_SLI_EVENT_TYPE_NVLOG_POST		0x4
+#define LPFC_SLI_EVENT_TYPE_DIAG_DUMP		0x5
+};
+
 /*
  * Define the bootstrap mailbox (bmbx) region used to communicate
  * mailbox command between the host and port. The mailbox consists
@@ -2210,7 +2355,7 @@ struct wqe_common {
 #define wqe_rcvoxid_WORD      word9
 	uint32_t word10;
 #define wqe_ebde_cnt_SHIFT    0
-#define wqe_ebde_cnt_MASK     0x00000007
+#define wqe_ebde_cnt_MASK     0x0000000f
 #define wqe_ebde_cnt_WORD     word10
 #define wqe_lenloc_SHIFT      7
 #define wqe_lenloc_MASK       0x00000003
@@ -2402,7 +2547,6 @@ struct xmit_seq64_wqe {
 	uint32_t relative_offset;
 	struct wqe_rctl_dfctl wge_ctl;
 	struct wqe_common wqe_com; /* words 6-11 */
-	/* Note: word10 different REVISIT */
 	uint32_t xmit_len;
 	uint32_t rsvd_12_15[3];
 };
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index b3065791f30..462242dcdd0 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -446,23 +446,25 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	/* Get the default values for Model Name and Description */
 	lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
 
-	if ((phba->cfg_link_speed > LINK_SPEED_10G)
-	    || ((phba->cfg_link_speed == LINK_SPEED_1G)
+	if ((phba->cfg_link_speed > LPFC_USER_LINK_SPEED_16G)
+	    || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_1G)
 		&& !(phba->lmt & LMT_1Gb))
-	    || ((phba->cfg_link_speed == LINK_SPEED_2G)
+	    || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_2G)
 		&& !(phba->lmt & LMT_2Gb))
-	    || ((phba->cfg_link_speed == LINK_SPEED_4G)
+	    || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_4G)
 		&& !(phba->lmt & LMT_4Gb))
-	    || ((phba->cfg_link_speed == LINK_SPEED_8G)
+	    || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_8G)
 		&& !(phba->lmt & LMT_8Gb))
-	    || ((phba->cfg_link_speed == LINK_SPEED_10G)
-		&& !(phba->lmt & LMT_10Gb))) {
+	    || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_10G)
+		&& !(phba->lmt & LMT_10Gb))
+	    || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G)
+		&& !(phba->lmt & LMT_16Gb))) {
 		/* Reset link speed to auto */
 		lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT,
 			"1302 Invalid speed for this board: "
 			"Reset link speed to auto: x%x\n",
 			phba->cfg_link_speed);
-			phba->cfg_link_speed = LINK_SPEED_AUTO;
+			phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
 	}
 
 	phba->link_state = LPFC_LINK_DOWN;
@@ -648,22 +650,23 @@ lpfc_hba_init_link(struct lpfc_hba *phba, uint32_t flag)
 	mb = &pmb->u.mb;
 	pmb->vport = vport;
 
-	lpfc_init_link(phba, pmb, phba->cfg_topology,
-		phba->cfg_link_speed);
+	lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed);
 	pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
 	lpfc_set_loopback_flag(phba);
 	rc = lpfc_sli_issue_mbox(phba, pmb, flag);
-	if (rc != MBX_SUCCESS) {
+	if ((rc != MBX_BUSY) && (rc != MBX_SUCCESS)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 			"0498 Adapter failed to init, mbxCmd x%x "
 			"INIT_LINK, mbxStatus x%x\n",
 			mb->mbxCommand, mb->mbxStatus);
-		/* Clear all interrupt enable conditions */
-		writel(0, phba->HCregaddr);
-		readl(phba->HCregaddr); /* flush */
-		/* Clear all pending interrupts */
-		writel(0xffffffff, phba->HAregaddr);
-		readl(phba->HAregaddr); /* flush */
+		if (phba->sli_rev <= LPFC_SLI_REV3) {
+			/* Clear all interrupt enable conditions */
+			writel(0, phba->HCregaddr);
+			readl(phba->HCregaddr); /* flush */
+			/* Clear all pending interrupts */
+			writel(0xffffffff, phba->HAregaddr);
+			readl(phba->HAregaddr); /* flush */
+		}
 		phba->link_state = LPFC_HBA_ERROR;
 		if (rc != MBX_BUSY || flag == MBX_POLL)
 			mempool_free(pmb, phba->mbox_mem_pool);
@@ -927,6 +930,35 @@ lpfc_hb_timeout(unsigned long ptr)
 }
 
 /**
+ * lpfc_rrq_timeout - The RRQ-timer timeout handler
+ * @ptr: unsigned long holds the pointer to lpfc hba data structure.
+ *
+ * This is the RRQ-timer timeout handler registered to the lpfc driver. When
+ * this timer fires, a RRQ timeout event shall be posted to the lpfc driver
+ * work-port-events bitmap and the worker thread is notified. This timeout
+ * event will be used by the worker thread to invoke the actual timeout
+ * handler routine, lpfc_rrq_handler. Any periodical operations will
+ * be performed in the timeout handler and the RRQ timeout event bit shall
+ * be cleared by the worker thread after it has taken the event bitmap out.
+ **/
+static void
+lpfc_rrq_timeout(unsigned long ptr)
+{
+	struct lpfc_hba *phba;
+	uint32_t tmo_posted;
+	unsigned long iflag;
+
+	phba = (struct lpfc_hba *)ptr;
+	spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
+	tmo_posted = phba->hba_flag & HBA_RRQ_ACTIVE;
+	if (!tmo_posted)
+		phba->hba_flag |= HBA_RRQ_ACTIVE;
+	spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);
+	if (!tmo_posted)
+		lpfc_worker_wake_up(phba);
+}
+
+/**
  * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
  * @phba: pointer to lpfc hba data structure.
  * @pmboxq: pointer to the driver internal queue element for mailbox command.
@@ -1374,6 +1406,8 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 	struct lpfc_vport *vport = phba->pport;
 	uint32_t event_data;
 	struct Scsi_Host *shost;
+	uint32_t if_type;
+	struct lpfc_register portstat_reg;
 
 	/* If the pci channel is offline, ignore possible errors, since
 	 * we cannot communicate with the pci card anyway.
@@ -1390,17 +1424,49 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
 	/* For now, the actual action for SLI4 device handling is not
 	 * specified yet, just treated it as adaptor hardware failure
 	 */
-	lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-			"0143 SLI4 Adapter Hardware Error Data: x%x x%x\n",
-			phba->work_status[0], phba->work_status[1]);
-
 	event_data = FC_REG_DUMP_EVENT;
 	shost = lpfc_shost_from_vport(vport);
 	fc_host_post_vendor_event(shost, fc_get_event_number(),
 				  sizeof(event_data), (char *) &event_data,
 				  SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX);
 
-	lpfc_sli4_offline_eratt(phba);
+	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
+	switch (if_type) {
+	case LPFC_SLI_INTF_IF_TYPE_0:
+		lpfc_sli4_offline_eratt(phba);
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_2:
+		portstat_reg.word0 =
+			readl(phba->sli4_hba.u.if_type2.STATUSregaddr);
+
+		if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
+			/* TODO: Register for Overtemp async events. */
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2889 Port Overtemperature event, "
+				"taking port\n");
+			spin_lock_irq(&phba->hbalock);
+			phba->over_temp_state = HBA_OVER_TEMP;
+			spin_unlock_irq(&phba->hbalock);
+			lpfc_sli4_offline_eratt(phba);
+			return;
+		}
+		if (bf_get(lpfc_sliport_status_rn, &portstat_reg)) {
+			/*
+			 * TODO: Attempt port recovery via a port reset.
+			 * When fully implemented, the driver should
+			 * attempt to recover the port here and return.
+			 * For now, log an error and take the port offline.
+			 */
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2887 Port Error: Attempting "
+					"Port Recovery\n");
+		}
+		lpfc_sli4_offline_eratt(phba);
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_1:
+	default:
+		break;
+	}
 }
 
 /**
@@ -1459,8 +1525,8 @@ lpfc_handle_latt(struct lpfc_hba *phba)
 	lpfc_els_flush_all_cmd(phba);
 
 	psli->slistat.link_event++;
-	lpfc_read_la(phba, pmb, mp);
-	pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la;
+	lpfc_read_topology(phba, pmb, mp);
+	pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
 	pmb->vport = vport;
 	/* Block ELS IOCBs until we have processed this mbox command */
 	phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
@@ -1853,6 +1919,14 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
 		m = (typeof(m)){"LPVe12002", "PCIe Shared I/O",
 				"Fibre Channel Adapter"};
 		break;
+	case PCI_DEVICE_ID_LANCER_FC:
+		oneConnect = 1;
+		m = (typeof(m)){"Undefined", "PCIe", "Fibre Channel Adapter"};
+		break;
+	case PCI_DEVICE_ID_LANCER_FCOE:
+		oneConnect = 1;
+		m = (typeof(m)){"Undefined", "PCIe", "FCoE"};
+		break;
 	default:
 		m = (typeof(m)){"Unknown", "", ""};
 		break;
@@ -2943,63 +3017,6 @@ lpfc_sli4_fcf_redisc_wait_tmo(unsigned long ptr)
 }
 
 /**
- * lpfc_sli4_fw_cfg_check - Read the firmware config and verify FCoE support
- * @phba: pointer to lpfc hba data structure.
- *
- * This function uses the QUERY_FW_CFG mailbox command to determine if the
- * firmware loaded supports FCoE. A return of zero indicates that the mailbox
- * was successful and the firmware supports FCoE. Any other return indicates
- * a error. It is assumed that this function will be called before interrupts
- * are enabled.
- **/
-static int
-lpfc_sli4_fw_cfg_check(struct lpfc_hba *phba)
-{
-	int rc = 0;
-	LPFC_MBOXQ_t *mboxq;
-	struct lpfc_mbx_query_fw_cfg *query_fw_cfg;
-	uint32_t length;
-	uint32_t shdr_status, shdr_add_status;
-
-	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-	if (!mboxq) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"2621 Failed to allocate mbox for "
-				"query firmware config cmd\n");
-		return -ENOMEM;
-	}
-	query_fw_cfg = &mboxq->u.mqe.un.query_fw_cfg;
-	length = (sizeof(struct lpfc_mbx_query_fw_cfg) -
-		  sizeof(struct lpfc_sli4_cfg_mhdr));
-	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
-			 LPFC_MBOX_OPCODE_QUERY_FW_CFG,
-			 length, LPFC_SLI4_MBX_EMBED);
-	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
-	/* The IOCTL status is embedded in the mailbox subheader. */
-	shdr_status = bf_get(lpfc_mbox_hdr_status,
-			     &query_fw_cfg->header.cfg_shdr.response);
-	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
-				 &query_fw_cfg->header.cfg_shdr.response);
-	if (shdr_status || shdr_add_status || rc != MBX_SUCCESS) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-				"2622 Query Firmware Config failed "
-				"mbx status x%x, status x%x add_status x%x\n",
-				rc, shdr_status, shdr_add_status);
-		return -EINVAL;
-	}
-	if (!bf_get(lpfc_function_mode_fcoe_i, query_fw_cfg)) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
-				"2623 FCoE Function not supported by firmware. "
-				"Function mode = %08x\n",
-				query_fw_cfg->function_mode);
-		return -EINVAL;
-	}
-	if (rc != MBX_TIMEOUT)
-		mempool_free(mboxq, phba->mbox_mem_pool);
-	return 0;
-}
-
-/**
  * lpfc_sli4_parse_latt_fault - Parse sli4 link-attention link fault code
  * @phba: pointer to lpfc hba data structure.
  * @acqe_link: pointer to the async link completion queue entry.
@@ -3051,20 +3068,20 @@ lpfc_sli4_parse_latt_type(struct lpfc_hba *phba,
 	switch (bf_get(lpfc_acqe_link_status, acqe_link)) {
 	case LPFC_ASYNC_LINK_STATUS_DOWN:
 	case LPFC_ASYNC_LINK_STATUS_LOGICAL_DOWN:
-		att_type = AT_LINK_DOWN;
+		att_type = LPFC_ATT_LINK_DOWN;
 		break;
 	case LPFC_ASYNC_LINK_STATUS_UP:
 		/* Ignore physical link up events - wait for logical link up */
-		att_type = AT_RESERVED;
+		att_type = LPFC_ATT_RESERVED;
 		break;
 	case LPFC_ASYNC_LINK_STATUS_LOGICAL_UP:
-		att_type = AT_LINK_UP;
+		att_type = LPFC_ATT_LINK_UP;
 		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0399 Invalid link attention type: x%x\n",
 				bf_get(lpfc_acqe_link_status, acqe_link));
-		att_type = AT_RESERVED;
+		att_type = LPFC_ATT_RESERVED;
 		break;
 	}
 	return att_type;
@@ -3088,36 +3105,32 @@ lpfc_sli4_parse_latt_link_speed(struct lpfc_hba *phba,
 
 	switch (bf_get(lpfc_acqe_link_speed, acqe_link)) {
 	case LPFC_ASYNC_LINK_SPEED_ZERO:
-		link_speed = LA_UNKNW_LINK;
-		break;
 	case LPFC_ASYNC_LINK_SPEED_10MBPS:
-		link_speed = LA_UNKNW_LINK;
-		break;
 	case LPFC_ASYNC_LINK_SPEED_100MBPS:
-		link_speed = LA_UNKNW_LINK;
+		link_speed = LPFC_LINK_SPEED_UNKNOWN;
 		break;
 	case LPFC_ASYNC_LINK_SPEED_1GBPS:
-		link_speed = LA_1GHZ_LINK;
+		link_speed = LPFC_LINK_SPEED_1GHZ;
 		break;
 	case LPFC_ASYNC_LINK_SPEED_10GBPS:
-		link_speed = LA_10GHZ_LINK;
+		link_speed = LPFC_LINK_SPEED_10GHZ;
 		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
 				"0483 Invalid link-attention link speed: x%x\n",
 				bf_get(lpfc_acqe_link_speed, acqe_link));
-		link_speed = LA_UNKNW_LINK;
+		link_speed = LPFC_LINK_SPEED_UNKNOWN;
 		break;
 	}
 	return link_speed;
 }
 
 /**
- * lpfc_sli4_async_link_evt - Process the asynchronous link event
+ * lpfc_sli4_async_link_evt - Process the asynchronous FCoE link event
  * @phba: pointer to lpfc hba data structure.
  * @acqe_link: pointer to the async link completion queue entry.
  *
- * This routine is to handle the SLI4 asynchronous link event.
+ * This routine is to handle the SLI4 asynchronous FCoE link event.
  **/
 static void
 lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
@@ -3126,11 +3139,12 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
 	struct lpfc_dmabuf *mp;
 	LPFC_MBOXQ_t *pmb;
 	MAILBOX_t *mb;
-	READ_LA_VAR *la;
+	struct lpfc_mbx_read_top *la;
 	uint8_t att_type;
+	int rc;
 
 	att_type = lpfc_sli4_parse_latt_type(phba, acqe_link);
-	if (att_type != AT_LINK_DOWN && att_type != AT_LINK_UP)
+	if (att_type != LPFC_ATT_LINK_DOWN && att_type != LPFC_ATT_LINK_UP)
 		return;
 	phba->fcoe_eventtag = acqe_link->event_tag;
 	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
@@ -3161,45 +3175,168 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
 	/* Update link event statistics */
 	phba->sli.slistat.link_event++;
 
-	/* Create pseudo lpfc_handle_latt mailbox command from link ACQE */
-	lpfc_read_la(phba, pmb, mp);
+	/* Create lpfc_handle_latt mailbox command from link ACQE */
+	lpfc_read_topology(phba, pmb, mp);
+	pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
 	pmb->vport = phba->pport;
 
+	/* Keep the link status for extra SLI4 state machine reference */
+	phba->sli4_hba.link_state.speed =
+				bf_get(lpfc_acqe_link_speed, acqe_link);
+	phba->sli4_hba.link_state.duplex =
+				bf_get(lpfc_acqe_link_duplex, acqe_link);
+	phba->sli4_hba.link_state.status =
+				bf_get(lpfc_acqe_link_status, acqe_link);
+	phba->sli4_hba.link_state.type =
+				bf_get(lpfc_acqe_link_type, acqe_link);
+	phba->sli4_hba.link_state.number =
+				bf_get(lpfc_acqe_link_number, acqe_link);
+	phba->sli4_hba.link_state.fault =
+				bf_get(lpfc_acqe_link_fault, acqe_link);
+	phba->sli4_hba.link_state.logical_speed =
+			bf_get(lpfc_acqe_logical_link_speed, acqe_link);
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"2900 Async FCoE Link event - Speed:%dGBit duplex:x%x "
+			"LA Type:x%x Port Type:%d Port Number:%d Logical "
+			"speed:%dMbps Fault:%d\n",
+			phba->sli4_hba.link_state.speed,
+			phba->sli4_hba.link_state.topology,
+			phba->sli4_hba.link_state.status,
+			phba->sli4_hba.link_state.type,
+			phba->sli4_hba.link_state.number,
+			phba->sli4_hba.link_state.logical_speed * 10,
+			phba->sli4_hba.link_state.fault);
+	/*
+	 * For FC Mode: issue the READ_TOPOLOGY mailbox command to fetch
+	 * topology info. Note: Optional for non FC-AL ports.
+	 */
+	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+		rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+		if (rc == MBX_NOT_FINISHED)
+			goto out_free_dmabuf;
+		return;
+	}
+	/*
+	 * For FCoE Mode: fill in all the topology information we need and call
+	 * the READ_TOPOLOGY completion routine to continue without actually
+	 * sending the READ_TOPOLOGY mailbox command to the port.
+	 */
 	/* Parse and translate status field */
 	mb = &pmb->u.mb;
 	mb->mbxStatus = lpfc_sli4_parse_latt_fault(phba, acqe_link);
 
 	/* Parse and translate link attention fields */
-	la = (READ_LA_VAR *) &pmb->u.mb.un.varReadLA;
+	la = (struct lpfc_mbx_read_top *) &pmb->u.mb.un.varReadTop;
 	la->eventTag = acqe_link->event_tag;
-	la->attType = att_type;
-	la->UlnkSpeed = lpfc_sli4_parse_latt_link_speed(phba, acqe_link);
+	bf_set(lpfc_mbx_read_top_att_type, la, att_type);
+	bf_set(lpfc_mbx_read_top_link_spd, la,
+	       lpfc_sli4_parse_latt_link_speed(phba, acqe_link));
 
 	/* Fake the the following irrelvant fields */
-	la->topology = TOPOLOGY_PT_PT;
-	la->granted_AL_PA = 0;
-	la->il = 0;
-	la->pb = 0;
-	la->fa = 0;
-	la->mm = 0;
+	bf_set(lpfc_mbx_read_top_topology, la, LPFC_TOPOLOGY_PT_PT);
+	bf_set(lpfc_mbx_read_top_alpa_granted, la, 0);
+	bf_set(lpfc_mbx_read_top_il, la, 0);
+	bf_set(lpfc_mbx_read_top_pb, la, 0);
+	bf_set(lpfc_mbx_read_top_fa, la, 0);
+	bf_set(lpfc_mbx_read_top_mm, la, 0);
+
+	/* Invoke the lpfc_handle_latt mailbox command callback function */
+	lpfc_mbx_cmpl_read_topology(phba, pmb);
+
+	return;
 
+out_free_dmabuf:
+	kfree(mp);
+out_free_pmb:
+	mempool_free(pmb, phba->mbox_mem_pool);
+}
+
+/**
+ * lpfc_sli4_async_fc_evt - Process the asynchronous FC link event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_fc: pointer to the async fc completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous FC event. It will simply log
+ * that the event was received and then issue a read_topology mailbox command so
+ * that the rest of the driver will treat it the same as SLI3.
+ **/
+static void
+lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc)
+{
+	struct lpfc_dmabuf *mp;
+	LPFC_MBOXQ_t *pmb;
+	int rc;
+
+	if (bf_get(lpfc_trailer_type, acqe_fc) !=
+	    LPFC_FC_LA_EVENT_TYPE_FC_LINK) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2895 Non FC link Event detected.(%d)\n",
+				bf_get(lpfc_trailer_type, acqe_fc));
+		return;
+	}
 	/* Keep the link status for extra SLI4 state machine reference */
 	phba->sli4_hba.link_state.speed =
-				bf_get(lpfc_acqe_link_speed, acqe_link);
-	phba->sli4_hba.link_state.duplex =
-				bf_get(lpfc_acqe_link_duplex, acqe_link);
+				bf_get(lpfc_acqe_fc_la_speed, acqe_fc);
+	phba->sli4_hba.link_state.duplex = LPFC_ASYNC_LINK_DUPLEX_FULL;
+	phba->sli4_hba.link_state.topology =
+				bf_get(lpfc_acqe_fc_la_topology, acqe_fc);
 	phba->sli4_hba.link_state.status =
-				bf_get(lpfc_acqe_link_status, acqe_link);
-	phba->sli4_hba.link_state.physical =
-				bf_get(lpfc_acqe_link_physical, acqe_link);
+				bf_get(lpfc_acqe_fc_la_att_type, acqe_fc);
+	phba->sli4_hba.link_state.type =
+				bf_get(lpfc_acqe_fc_la_port_type, acqe_fc);
+	phba->sli4_hba.link_state.number =
+				bf_get(lpfc_acqe_fc_la_port_number, acqe_fc);
 	phba->sli4_hba.link_state.fault =
-				bf_get(lpfc_acqe_link_fault, acqe_link);
+				bf_get(lpfc_acqe_link_fault, acqe_fc);
 	phba->sli4_hba.link_state.logical_speed =
-				bf_get(lpfc_acqe_qos_link_speed, acqe_link);
+				bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc);
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"2896 Async FC event - Speed:%dGBaud Topology:x%x "
+			"LA Type:x%x Port Type:%d Port Number:%d Logical speed:"
+			"%dMbps Fault:%d\n",
+			phba->sli4_hba.link_state.speed,
+			phba->sli4_hba.link_state.topology,
+			phba->sli4_hba.link_state.status,
+			phba->sli4_hba.link_state.type,
+			phba->sli4_hba.link_state.number,
+			phba->sli4_hba.link_state.logical_speed * 10,
+			phba->sli4_hba.link_state.fault);
+	pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!pmb) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2897 The mboxq allocation failed\n");
+		return;
+	}
+	mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
+	if (!mp) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2898 The lpfc_dmabuf allocation failed\n");
+		goto out_free_pmb;
+	}
+	mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
+	if (!mp->virt) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"2899 The mbuf allocation failed\n");
+		goto out_free_dmabuf;
+	}
 
-	/* Invoke the lpfc_handle_latt mailbox command callback function */
-	lpfc_mbx_cmpl_read_la(phba, pmb);
+	/* Cleanup any outstanding ELS commands */
+	lpfc_els_flush_all_cmd(phba);
+
+	/* Block ELS IOCBs until we have done process link event */
+	phba->sli.ring[LPFC_ELS_RING].flag |= LPFC_STOP_IOCB_EVENT;
+
+	/* Update link event statistics */
+	phba->sli.slistat.link_event++;
+
+	/* Create lpfc_handle_latt mailbox command from link ACQE */
+	lpfc_read_topology(phba, pmb, mp);
+	pmb->mbox_cmpl = lpfc_mbx_cmpl_read_topology;
+	pmb->vport = phba->pport;
 
+	rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT);
+	if (rc == MBX_NOT_FINISHED)
+		goto out_free_dmabuf;
 	return;
 
 out_free_dmabuf:
@@ -3209,6 +3346,24 @@ out_free_pmb:
 }
 
 /**
+ * lpfc_sli4_async_sli_evt - Process the asynchronous SLI link event
+ * @phba: pointer to lpfc hba data structure.
+ * @acqe_fc: pointer to the async SLI completion queue entry.
+ *
+ * This routine is to handle the SLI4 asynchronous SLI events.
+ **/
+static void
+lpfc_sli4_async_sli_evt(struct lpfc_hba *phba, struct lpfc_acqe_sli *acqe_sli)
+{
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"2901 Async SLI event - Event Data1:x%08x Event Data2:"
+			"x%08x SLI Event Type:%d",
+			acqe_sli->event_data1, acqe_sli->event_data2,
+			bf_get(lpfc_trailer_type, acqe_sli));
+	return;
+}
+
+/**
  * lpfc_sli4_perform_vport_cvl - Perform clear virtual link on a vport
  * @vport: pointer to vport data structure.
  *
@@ -3247,10 +3402,12 @@ lpfc_sli4_perform_vport_cvl(struct lpfc_vport *vport)
 		if (!ndlp)
 			return 0;
 	}
-	if (phba->pport->port_state < LPFC_FLOGI)
+	if ((phba->pport->port_state < LPFC_FLOGI) &&
+		(phba->pport->port_state != LPFC_VPORT_FAILED))
 		return NULL;
 	/* If virtual link is not yet instantiated ignore CVL */
-	if ((vport != phba->pport) && (vport->port_state < LPFC_FDISC))
+	if ((vport != phba->pport) && (vport->port_state < LPFC_FDISC)
+		&& (vport->port_state != LPFC_VPORT_FAILED))
 		return NULL;
 	shost = lpfc_shost_from_vport(vport);
 	if (!shost)
@@ -3285,17 +3442,17 @@ lpfc_sli4_perform_all_vport_cvl(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_sli4_async_fcoe_evt - Process the asynchronous fcoe event
+ * lpfc_sli4_async_fip_evt - Process the asynchronous FCoE FIP event
  * @phba: pointer to lpfc hba data structure.
  * @acqe_link: pointer to the async fcoe completion queue entry.
  *
  * This routine is to handle the SLI4 asynchronous fcoe event.
  **/
 static void
-lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
-			 struct lpfc_acqe_fcoe *acqe_fcoe)
+lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
+			struct lpfc_acqe_fip *acqe_fip)
 {
-	uint8_t event_type = bf_get(lpfc_acqe_fcoe_event_type, acqe_fcoe);
+	uint8_t event_type = bf_get(lpfc_trailer_type, acqe_fip);
 	int rc;
 	struct lpfc_vport *vport;
 	struct lpfc_nodelist *ndlp;
@@ -3304,25 +3461,25 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 	struct lpfc_vport **vports;
 	int i;
 
-	phba->fc_eventTag = acqe_fcoe->event_tag;
-	phba->fcoe_eventtag = acqe_fcoe->event_tag;
+	phba->fc_eventTag = acqe_fip->event_tag;
+	phba->fcoe_eventtag = acqe_fip->event_tag;
 	switch (event_type) {
-	case LPFC_FCOE_EVENT_TYPE_NEW_FCF:
-	case LPFC_FCOE_EVENT_TYPE_FCF_PARAM_MOD:
-		if (event_type == LPFC_FCOE_EVENT_TYPE_NEW_FCF)
+	case LPFC_FIP_EVENT_TYPE_NEW_FCF:
+	case LPFC_FIP_EVENT_TYPE_FCF_PARAM_MOD:
+		if (event_type == LPFC_FIP_EVENT_TYPE_NEW_FCF)
 			lpfc_printf_log(phba, KERN_ERR, LOG_FIP |
 					LOG_DISCOVERY,
 					"2546 New FCF event, evt_tag:x%x, "
 					"index:x%x\n",
-					acqe_fcoe->event_tag,
-					acqe_fcoe->index);
+					acqe_fip->event_tag,
+					acqe_fip->index);
 		else
 			lpfc_printf_log(phba, KERN_WARNING, LOG_FIP |
 					LOG_DISCOVERY,
 					"2788 FCF param modified event, "
 					"evt_tag:x%x, index:x%x\n",
-					acqe_fcoe->event_tag,
-					acqe_fcoe->index);
+					acqe_fip->event_tag,
+					acqe_fip->index);
 		if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
 			/*
 			 * During period of FCF discovery, read the FCF
@@ -3333,8 +3490,8 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 					LOG_DISCOVERY,
 					"2779 Read FCF (x%x) for updating "
 					"roundrobin FCF failover bmask\n",
-					acqe_fcoe->index);
-			rc = lpfc_sli4_read_fcf_rec(phba, acqe_fcoe->index);
+					acqe_fip->index);
+			rc = lpfc_sli4_read_fcf_rec(phba, acqe_fip->index);
 		}
 
 		/* If the FCF discovery is in progress, do nothing. */
@@ -3360,7 +3517,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
 				"2770 Start FCF table scan per async FCF "
 				"event, evt_tag:x%x, index:x%x\n",
-				acqe_fcoe->event_tag, acqe_fcoe->index);
+				acqe_fip->event_tag, acqe_fip->index);
 		rc = lpfc_sli4_fcf_scan_read_fcf_rec(phba,
 						     LPFC_FCOE_FCF_GET_FIRST);
 		if (rc)
@@ -3369,17 +3526,17 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 					"command failed (x%x)\n", rc);
 		break;
 
-	case LPFC_FCOE_EVENT_TYPE_FCF_TABLE_FULL:
+	case LPFC_FIP_EVENT_TYPE_FCF_TABLE_FULL:
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 			"2548 FCF Table full count 0x%x tag 0x%x\n",
-			bf_get(lpfc_acqe_fcoe_fcf_count, acqe_fcoe),
-			acqe_fcoe->event_tag);
+			bf_get(lpfc_acqe_fip_fcf_count, acqe_fip),
+			acqe_fip->event_tag);
 		break;
 
-	case LPFC_FCOE_EVENT_TYPE_FCF_DEAD:
+	case LPFC_FIP_EVENT_TYPE_FCF_DEAD:
 		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
 			"2549 FCF (x%x) disconnected from network, "
-			"tag:x%x\n", acqe_fcoe->index, acqe_fcoe->event_tag);
+			"tag:x%x\n", acqe_fip->index, acqe_fip->event_tag);
 		/*
 		 * If we are in the middle of FCF failover process, clear
 		 * the corresponding FCF bit in the roundrobin bitmap.
@@ -3388,13 +3545,13 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 		if (phba->fcf.fcf_flag & FCF_DISCOVERY) {
 			spin_unlock_irq(&phba->hbalock);
 			/* Update FLOGI FCF failover eligible FCF bmask */
-			lpfc_sli4_fcf_rr_index_clear(phba, acqe_fcoe->index);
+			lpfc_sli4_fcf_rr_index_clear(phba, acqe_fip->index);
 			break;
 		}
 		spin_unlock_irq(&phba->hbalock);
 
 		/* If the event is not for currently used fcf do nothing */
-		if (phba->fcf.current_rec.fcf_indx != acqe_fcoe->index)
+		if (phba->fcf.current_rec.fcf_indx != acqe_fip->index)
 			break;
 
 		/*
@@ -3411,7 +3568,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 		lpfc_printf_log(phba, KERN_INFO, LOG_FIP | LOG_DISCOVERY,
 				"2771 Start FCF fast failover process due to "
 				"FCF DEAD event: evt_tag:x%x, fcf_index:x%x "
-				"\n", acqe_fcoe->event_tag, acqe_fcoe->index);
+				"\n", acqe_fip->event_tag, acqe_fip->index);
 		rc = lpfc_sli4_redisc_fcf_table(phba);
 		if (rc) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_FIP |
@@ -3438,12 +3595,12 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 			lpfc_sli4_perform_all_vport_cvl(phba);
 		}
 		break;
-	case LPFC_FCOE_EVENT_TYPE_CVL:
+	case LPFC_FIP_EVENT_TYPE_CVL:
 		lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY,
 			"2718 Clear Virtual Link Received for VPI 0x%x"
-			" tag 0x%x\n", acqe_fcoe->index, acqe_fcoe->event_tag);
+			" tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag);
 		vport = lpfc_find_vport_by_vpid(phba,
-				acqe_fcoe->index - phba->vpi_base);
+				acqe_fip->index - phba->vpi_base);
 		ndlp = lpfc_sli4_perform_vport_cvl(vport);
 		if (!ndlp)
 			break;
@@ -3494,7 +3651,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 			lpfc_printf_log(phba, KERN_INFO, LOG_FIP |
 					LOG_DISCOVERY,
 					"2773 Start FCF failover per CVL, "
-					"evt_tag:x%x\n", acqe_fcoe->event_tag);
+					"evt_tag:x%x\n", acqe_fip->event_tag);
 			rc = lpfc_sli4_redisc_fcf_table(phba);
 			if (rc) {
 				lpfc_printf_log(phba, KERN_ERR, LOG_FIP |
@@ -3522,7 +3679,7 @@ lpfc_sli4_async_fcoe_evt(struct lpfc_hba *phba,
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 			"0288 Unknown FCoE event type 0x%x event tag "
-			"0x%x\n", event_type, acqe_fcoe->event_tag);
+			"0x%x\n", event_type, acqe_fip->event_tag);
 		break;
 	}
 }
@@ -3599,8 +3756,7 @@ void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
 						 &cq_event->cqe.acqe_link);
 			break;
 		case LPFC_TRAILER_CODE_FCOE:
-			lpfc_sli4_async_fcoe_evt(phba,
-						 &cq_event->cqe.acqe_fcoe);
+			lpfc_sli4_async_fip_evt(phba, &cq_event->cqe.acqe_fip);
 			break;
 		case LPFC_TRAILER_CODE_DCBX:
 			lpfc_sli4_async_dcbx_evt(phba,
@@ -3610,6 +3766,12 @@ void lpfc_sli4_async_event_proc(struct lpfc_hba *phba)
 			lpfc_sli4_async_grp5_evt(phba,
 						 &cq_event->cqe.acqe_grp5);
 			break;
+		case LPFC_TRAILER_CODE_FC:
+			lpfc_sli4_async_fc_evt(phba, &cq_event->cqe.acqe_fc);
+			break;
+		case LPFC_TRAILER_CODE_SLI:
+			lpfc_sli4_async_sli_evt(phba, &cq_event->cqe.acqe_sli);
+			break;
 		default:
 			lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
 					"1804 Invalid asynchrous event code: "
@@ -3948,7 +4110,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	int rc, i, hbq_count, buf_size, dma_buf_size, max_buf_size;
 	uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
 	struct lpfc_mqe *mqe;
-	int longs;
+	int longs, sli_family;
 
 	/* Before proceed, wait for POST done and device ready */
 	rc = lpfc_sli4_post_status_check(phba);
@@ -3963,6 +4125,9 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	init_timer(&phba->hb_tmofunc);
 	phba->hb_tmofunc.function = lpfc_hb_timeout;
 	phba->hb_tmofunc.data = (unsigned long)phba;
+	init_timer(&phba->rrq_tmr);
+	phba->rrq_tmr.function = lpfc_rrq_timeout;
+	phba->rrq_tmr.data = (unsigned long)phba;
 
 	psli = &phba->sli;
 	/* MBOX heartbeat timer */
@@ -4010,12 +4175,22 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	 */
 	buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
 		    ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge)));
-	/* Feature Level 1 hardware is limited to 2 pages */
-	if ((bf_get(lpfc_sli_intf_featurelevel1, &phba->sli4_hba.sli_intf) ==
-	     LPFC_SLI_INTF_FEATURELEVEL1_1))
-		max_buf_size = LPFC_SLI4_FL1_MAX_BUF_SIZE;
-	else
-		max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
+
+	sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);
+	max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
+	switch (sli_family) {
+	case LPFC_SLI_INTF_FAMILY_BE2:
+	case LPFC_SLI_INTF_FAMILY_BE3:
+		/* There is a single hint for BE - 2 pages per BPL. */
+		if (bf_get(lpfc_sli_intf_sli_hint1, &phba->sli4_hba.sli_intf) ==
+		    LPFC_SLI_INTF_SLI_HINT1_1)
+			max_buf_size = LPFC_SLI4_FL1_MAX_BUF_SIZE;
+		break;
+	case LPFC_SLI_INTF_FAMILY_LNCR_A0:
+	case LPFC_SLI_INTF_FAMILY_LNCR_B0:
+	default:
+		break;
+	}
 	for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
 	     dma_buf_size < max_buf_size && buf_size > dma_buf_size;
 	     dma_buf_size = dma_buf_size << 1)
@@ -4070,6 +4245,14 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	if (rc)
 		return -ENOMEM;
 
+	/* IF Type 2 ports get initialized now. */
+	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+	    LPFC_SLI_INTF_IF_TYPE_2) {
+		rc = lpfc_pci_function_reset(phba);
+		if (unlikely(rc))
+			return -ENODEV;
+	}
+
 	/* Create the bootstrap mailbox command */
 	rc = lpfc_create_bootstrap_mbox(phba);
 	if (unlikely(rc))
@@ -4080,19 +4263,18 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	if (unlikely(rc))
 		goto out_free_bsmbx;
 
-	rc = lpfc_sli4_fw_cfg_check(phba);
-	if (unlikely(rc))
-		goto out_free_bsmbx;
-
 	/* Set up the hba's configuration parameters. */
 	rc = lpfc_sli4_read_config(phba);
 	if (unlikely(rc))
 		goto out_free_bsmbx;
 
-	/* Perform a function reset */
-	rc = lpfc_pci_function_reset(phba);
-	if (unlikely(rc))
-		goto out_free_bsmbx;
+	/* IF Type 0 ports get initialized now. */
+	if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) ==
+	    LPFC_SLI_INTF_IF_TYPE_0) {
+		rc = lpfc_pci_function_reset(phba);
+		if (unlikely(rc))
+			goto out_free_bsmbx;
+	}
 
 	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
 						       GFP_KERNEL);
@@ -5190,97 +5372,183 @@ lpfc_sli_pci_mem_unset(struct lpfc_hba *phba)
 int
 lpfc_sli4_post_status_check(struct lpfc_hba *phba)
 {
-	struct lpfc_register sta_reg, uerrlo_reg, uerrhi_reg;
-	int i, port_error = -ENODEV;
+	struct lpfc_register portsmphr_reg, uerrlo_reg, uerrhi_reg;
+	struct lpfc_register reg_data;
+	int i, port_error = 0;
+	uint32_t if_type;
 
-	if (!phba->sli4_hba.STAregaddr)
+	if (!phba->sli4_hba.PSMPHRregaddr)
 		return -ENODEV;
 
 	/* Wait up to 30 seconds for the SLI Port POST done and ready */
 	for (i = 0; i < 3000; i++) {
-		sta_reg.word0 = readl(phba->sli4_hba.STAregaddr);
-		/* Encounter fatal POST error, break out */
-		if (bf_get(lpfc_hst_state_perr, &sta_reg)) {
+		portsmphr_reg.word0 = readl(phba->sli4_hba.PSMPHRregaddr);
+		if (bf_get(lpfc_port_smphr_perr, &portsmphr_reg)) {
+			/* Port has a fatal POST error, break out */
 			port_error = -ENODEV;
 			break;
 		}
-		if (LPFC_POST_STAGE_ARMFW_READY ==
-		    bf_get(lpfc_hst_state_port_status, &sta_reg)) {
-			port_error = 0;
+		if (LPFC_POST_STAGE_PORT_READY ==
+		    bf_get(lpfc_port_smphr_port_status, &portsmphr_reg))
 			break;
-		}
 		msleep(10);
 	}
 
-	if (port_error)
+	/*
+	 * If there was a port error during POST, then don't proceed with
+	 * other register reads as the data may not be valid.  Just exit.
+	 */
+	if (port_error) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-			"1408 Failure HBA POST Status: sta_reg=0x%x, "
-			"perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, xrom=x%x, "
-			"dl=x%x, pstatus=x%x\n", sta_reg.word0,
-			bf_get(lpfc_hst_state_perr, &sta_reg),
-			bf_get(lpfc_hst_state_sfi, &sta_reg),
-			bf_get(lpfc_hst_state_nip, &sta_reg),
-			bf_get(lpfc_hst_state_ipc, &sta_reg),
-			bf_get(lpfc_hst_state_xrom, &sta_reg),
-			bf_get(lpfc_hst_state_dl, &sta_reg),
-			bf_get(lpfc_hst_state_port_status, &sta_reg));
-
-	/* Log device information */
-	phba->sli4_hba.sli_intf.word0 = readl(phba->sli4_hba.SLIINTFregaddr);
-	if (bf_get(lpfc_sli_intf_valid,
-		   &phba->sli4_hba.sli_intf) == LPFC_SLI_INTF_VALID) {
+			"1408 Port Failed POST - portsmphr=0x%x, "
+			"perr=x%x, sfi=x%x, nip=x%x, ipc=x%x, scr1=x%x, "
+			"scr2=x%x, hscratch=x%x, pstatus=x%x\n",
+			portsmphr_reg.word0,
+			bf_get(lpfc_port_smphr_perr, &portsmphr_reg),
+			bf_get(lpfc_port_smphr_sfi, &portsmphr_reg),
+			bf_get(lpfc_port_smphr_nip, &portsmphr_reg),
+			bf_get(lpfc_port_smphr_ipc, &portsmphr_reg),
+			bf_get(lpfc_port_smphr_scr1, &portsmphr_reg),
+			bf_get(lpfc_port_smphr_scr2, &portsmphr_reg),
+			bf_get(lpfc_port_smphr_host_scratch, &portsmphr_reg),
+			bf_get(lpfc_port_smphr_port_status, &portsmphr_reg));
+	} else {
 		lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
-				"2534 Device Info: ChipType=0x%x, SliRev=0x%x, "
-				"FeatureL1=0x%x, FeatureL2=0x%x\n",
+				"2534 Device Info: SLIFamily=0x%x, "
+				"SLIRev=0x%x, IFType=0x%x, SLIHint_1=0x%x, "
+				"SLIHint_2=0x%x, FT=0x%x\n",
 				bf_get(lpfc_sli_intf_sli_family,
 				       &phba->sli4_hba.sli_intf),
 				bf_get(lpfc_sli_intf_slirev,
 				       &phba->sli4_hba.sli_intf),
-				bf_get(lpfc_sli_intf_featurelevel1,
+				bf_get(lpfc_sli_intf_if_type,
+				       &phba->sli4_hba.sli_intf),
+				bf_get(lpfc_sli_intf_sli_hint1,
 				       &phba->sli4_hba.sli_intf),
-				bf_get(lpfc_sli_intf_featurelevel2,
+				bf_get(lpfc_sli_intf_sli_hint2,
+				       &phba->sli4_hba.sli_intf),
+				bf_get(lpfc_sli_intf_func_type,
 				       &phba->sli4_hba.sli_intf));
+		/*
+		 * Check for other Port errors during the initialization
+		 * process.  Fail the load if the port did not come up
+		 * correctly.
+		 */
+		if_type = bf_get(lpfc_sli_intf_if_type,
+				 &phba->sli4_hba.sli_intf);
+		switch (if_type) {
+		case LPFC_SLI_INTF_IF_TYPE_0:
+			phba->sli4_hba.ue_mask_lo =
+			      readl(phba->sli4_hba.u.if_type0.UEMASKLOregaddr);
+			phba->sli4_hba.ue_mask_hi =
+			      readl(phba->sli4_hba.u.if_type0.UEMASKHIregaddr);
+			uerrlo_reg.word0 =
+			      readl(phba->sli4_hba.u.if_type0.UERRLOregaddr);
+			uerrhi_reg.word0 =
+				readl(phba->sli4_hba.u.if_type0.UERRHIregaddr);
+			if ((~phba->sli4_hba.ue_mask_lo & uerrlo_reg.word0) ||
+			    (~phba->sli4_hba.ue_mask_hi & uerrhi_reg.word0)) {
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+						"1422 Unrecoverable Error "
+						"Detected during POST "
+						"uerr_lo_reg=0x%x, "
+						"uerr_hi_reg=0x%x, "
+						"ue_mask_lo_reg=0x%x, "
+						"ue_mask_hi_reg=0x%x\n",
+						uerrlo_reg.word0,
+						uerrhi_reg.word0,
+						phba->sli4_hba.ue_mask_lo,
+						phba->sli4_hba.ue_mask_hi);
+				port_error = -ENODEV;
+			}
+			break;
+		case LPFC_SLI_INTF_IF_TYPE_2:
+			/* Final checks.  The port status should be clean. */
+			reg_data.word0 =
+				readl(phba->sli4_hba.u.if_type2.STATUSregaddr);
+			if (bf_get(lpfc_sliport_status_err, &reg_data)) {
+				phba->work_status[0] =
+					readl(phba->sli4_hba.u.if_type2.
+					      ERR1regaddr);
+				phba->work_status[1] =
+					readl(phba->sli4_hba.u.if_type2.
+					      ERR2regaddr);
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2888 Port Error Detected "
+					"during POST: "
+					"port status reg 0x%x, "
+					"port_smphr reg 0x%x, "
+					"error 1=0x%x, error 2=0x%x\n",
+					reg_data.word0,
+					portsmphr_reg.word0,
+					phba->work_status[0],
+					phba->work_status[1]);
+				port_error = -ENODEV;
+			}
+			break;
+		case LPFC_SLI_INTF_IF_TYPE_1:
+		default:
+			break;
+		}
 	}
-	phba->sli4_hba.ue_mask_lo = readl(phba->sli4_hba.UEMASKLOregaddr);
-	phba->sli4_hba.ue_mask_hi = readl(phba->sli4_hba.UEMASKHIregaddr);
-	/* With uncoverable error, log the error message and return error */
-	uerrlo_reg.word0 = readl(phba->sli4_hba.UERRLOregaddr);
-	uerrhi_reg.word0 = readl(phba->sli4_hba.UERRHIregaddr);
-	if ((~phba->sli4_hba.ue_mask_lo & uerrlo_reg.word0) ||
-	    (~phba->sli4_hba.ue_mask_hi & uerrhi_reg.word0)) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"1422 HBA Unrecoverable error: "
-				"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
-				"ue_mask_lo_reg=0x%x, ue_mask_hi_reg=0x%x\n",
-				uerrlo_reg.word0, uerrhi_reg.word0,
-				phba->sli4_hba.ue_mask_lo,
-				phba->sli4_hba.ue_mask_hi);
-		return -ENODEV;
-	}
-
 	return port_error;
 }
 
 /**
  * lpfc_sli4_bar0_register_memmap - Set up SLI4 BAR0 register memory map.
  * @phba: pointer to lpfc hba data structure.
+ * @if_type:  The SLI4 interface type getting configured.
  *
  * This routine is invoked to set up SLI4 BAR0 PCI config space register
  * memory map.
  **/
 static void
-lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
-{
-	phba->sli4_hba.UERRLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
-					LPFC_UERR_STATUS_LO;
-	phba->sli4_hba.UERRHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
-					LPFC_UERR_STATUS_HI;
-	phba->sli4_hba.UEMASKLOregaddr = phba->sli4_hba.conf_regs_memmap_p +
-					LPFC_UE_MASK_LO;
-	phba->sli4_hba.UEMASKHIregaddr = phba->sli4_hba.conf_regs_memmap_p +
-					LPFC_UE_MASK_HI;
-	phba->sli4_hba.SLIINTFregaddr = phba->sli4_hba.conf_regs_memmap_p +
-					LPFC_SLI_INTF;
+lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba, uint32_t if_type)
+{
+	switch (if_type) {
+	case LPFC_SLI_INTF_IF_TYPE_0:
+		phba->sli4_hba.u.if_type0.UERRLOregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_UERR_STATUS_LO;
+		phba->sli4_hba.u.if_type0.UERRHIregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_UERR_STATUS_HI;
+		phba->sli4_hba.u.if_type0.UEMASKLOregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_UE_MASK_LO;
+		phba->sli4_hba.u.if_type0.UEMASKHIregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_UE_MASK_HI;
+		phba->sli4_hba.SLIINTFregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_2:
+		phba->sli4_hba.u.if_type2.ERR1regaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_ERR_1;
+		phba->sli4_hba.u.if_type2.ERR2regaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_ERR_2;
+		phba->sli4_hba.u.if_type2.CTRLregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_CNTRL;
+		phba->sli4_hba.u.if_type2.STATUSregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_STATUS;
+		phba->sli4_hba.SLIINTFregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_SLI_INTF;
+		phba->sli4_hba.PSMPHRregaddr =
+		     phba->sli4_hba.conf_regs_memmap_p + LPFC_SLIPORT_IF2_SMPHR;
+		phba->sli4_hba.RQDBregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_RQ_DOORBELL;
+		phba->sli4_hba.WQDBregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_WQ_DOORBELL;
+		phba->sli4_hba.EQCQDBregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_EQCQ_DOORBELL;
+		phba->sli4_hba.MQDBregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_MQ_DOORBELL;
+		phba->sli4_hba.BMBXregaddr =
+			phba->sli4_hba.conf_regs_memmap_p + LPFC_BMBX;
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_1:
+	default:
+		dev_printk(KERN_ERR, &phba->pcidev->dev,
+			   "FATAL - unsupported SLI4 interface type - %d\n",
+			   if_type);
+		break;
+	}
 }
 
 /**
@@ -5293,16 +5561,14 @@ lpfc_sli4_bar0_register_memmap(struct lpfc_hba *phba)
 static void
 lpfc_sli4_bar1_register_memmap(struct lpfc_hba *phba)
 {
-
-	phba->sli4_hba.STAregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
-				    LPFC_HST_STATE;
+	phba->sli4_hba.PSMPHRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
+		LPFC_SLIPORT_IF0_SMPHR;
 	phba->sli4_hba.ISRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
-				    LPFC_HST_ISR0;
+		LPFC_HST_ISR0;
 	phba->sli4_hba.IMRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
-				    LPFC_HST_IMR0;
+		LPFC_HST_IMR0;
 	phba->sli4_hba.ISCRregaddr = phba->sli4_hba.ctrl_regs_memmap_p +
-				     LPFC_HST_ISCR0;
-	return;
+		LPFC_HST_ISCR0;
 }
 
 /**
@@ -5542,11 +5808,12 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_dev_endian_order_setup - Notify the port of the host's endian order.
+ * lpfc_setup_endian_order - Write endian order to an SLI4 if_type 0 port.
  * @phba: pointer to lpfc hba data structure.
  *
- * This routine is invoked to setup the host-side endian order to the
- * HBA consistent with the SLI-4 interface spec.
+ * This routine is invoked to setup the port-side endian order when
+ * the port if_type is 0.  This routine has no function for other
+ * if_types.
  *
  * Return codes
  * 	0 - successful
@@ -5557,34 +5824,44 @@ static int
 lpfc_setup_endian_order(struct lpfc_hba *phba)
 {
 	LPFC_MBOXQ_t *mboxq;
-	uint32_t rc = 0;
+	uint32_t if_type, rc = 0;
 	uint32_t endian_mb_data[2] = {HOST_ENDIAN_LOW_WORD0,
 				      HOST_ENDIAN_HIGH_WORD1};
 
-	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-	if (!mboxq) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"0492 Unable to allocate memory for issuing "
-				"SLI_CONFIG_SPECIAL mailbox command\n");
-		return -ENOMEM;
-	}
+	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
+	switch (if_type) {
+	case LPFC_SLI_INTF_IF_TYPE_0:
+		mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
+						       GFP_KERNEL);
+		if (!mboxq) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0492 Unable to allocate memory for "
+					"issuing SLI_CONFIG_SPECIAL mailbox "
+					"command\n");
+			return -ENOMEM;
+		}
 
-	/*
-	 * The SLI4_CONFIG_SPECIAL mailbox command requires the first two
-	 * words to contain special data values and no other data.
-	 */
-	memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
-	memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
-	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
-	if (rc != MBX_SUCCESS) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"0493 SLI_CONFIG_SPECIAL mailbox failed with "
-				"status x%x\n",
-				rc);
-		rc = -EIO;
+		/*
+		 * The SLI4_CONFIG_SPECIAL mailbox command requires the first
+		 * two words to contain special data values and no other data.
+		 */
+		memset(mboxq, 0, sizeof(LPFC_MBOXQ_t));
+		memcpy(&mboxq->u.mqe, &endian_mb_data, sizeof(endian_mb_data));
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		if (rc != MBX_SUCCESS) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0493 SLI_CONFIG_SPECIAL mailbox "
+					"failed with status x%x\n",
+					rc);
+			rc = -EIO;
+		}
+		mempool_free(mboxq, phba->mbox_mem_pool);
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_2:
+	case LPFC_SLI_INTF_IF_TYPE_1:
+	default:
+		break;
 	}
-
-	mempool_free(mboxq, phba->mbox_mem_pool);
 	return rc;
 }
 
@@ -6416,36 +6693,124 @@ int
 lpfc_pci_function_reset(struct lpfc_hba *phba)
 {
 	LPFC_MBOXQ_t *mboxq;
-	uint32_t rc = 0;
+	uint32_t rc = 0, if_type;
 	uint32_t shdr_status, shdr_add_status;
+	uint32_t rdy_chk, num_resets = 0, reset_again = 0;
 	union lpfc_sli4_cfg_shdr *shdr;
+	struct lpfc_register reg_data;
 
-	mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
-	if (!mboxq) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"0494 Unable to allocate memory for issuing "
-				"SLI_FUNCTION_RESET mailbox command\n");
-		return -ENOMEM;
-	}
+	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
+	switch (if_type) {
+	case LPFC_SLI_INTF_IF_TYPE_0:
+		mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool,
+						       GFP_KERNEL);
+		if (!mboxq) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0494 Unable to allocate memory for "
+					"issuing SLI_FUNCTION_RESET mailbox "
+					"command\n");
+			return -ENOMEM;
+		}
 
-	/* Set up PCI function reset SLI4_CONFIG mailbox-ioctl command */
-	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
-			 LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
-			 LPFC_SLI4_MBX_EMBED);
-	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
-	shdr = (union lpfc_sli4_cfg_shdr *)
-		&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
-	shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
-	shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
-	if (rc != MBX_TIMEOUT)
-		mempool_free(mboxq, phba->mbox_mem_pool);
-	if (shdr_status || shdr_add_status || rc) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"0495 SLI_FUNCTION_RESET mailbox failed with "
-				"status x%x add_status x%x, mbx status x%x\n",
-				shdr_status, shdr_add_status, rc);
-		rc = -ENXIO;
+		/* Setup PCI function reset mailbox-ioctl command */
+		lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+				 LPFC_MBOX_OPCODE_FUNCTION_RESET, 0,
+				 LPFC_SLI4_MBX_EMBED);
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		shdr = (union lpfc_sli4_cfg_shdr *)
+			&mboxq->u.mqe.un.sli4_config.header.cfg_shdr;
+		shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+		shdr_add_status = bf_get(lpfc_mbox_hdr_add_status,
+					 &shdr->response);
+		if (rc != MBX_TIMEOUT)
+			mempool_free(mboxq, phba->mbox_mem_pool);
+		if (shdr_status || shdr_add_status || rc) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"0495 SLI_FUNCTION_RESET mailbox "
+					"failed with status x%x add_status x%x,"
+					" mbx status x%x\n",
+					shdr_status, shdr_add_status, rc);
+			rc = -ENXIO;
+		}
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_2:
+		for (num_resets = 0;
+		     num_resets < MAX_IF_TYPE_2_RESETS;
+		     num_resets++) {
+			reg_data.word0 = 0;
+			bf_set(lpfc_sliport_ctrl_end, &reg_data,
+			       LPFC_SLIPORT_LITTLE_ENDIAN);
+			bf_set(lpfc_sliport_ctrl_ip, &reg_data,
+			       LPFC_SLIPORT_INIT_PORT);
+			writel(reg_data.word0, phba->sli4_hba.u.if_type2.
+			       CTRLregaddr);
+
+			/*
+			 * Poll the Port Status Register and wait for RDY for
+			 * up to 10 seconds.  If the port doesn't respond, treat
+			 * it as an error.  If the port responds with RN, start
+			 * the loop again.
+			 */
+			for (rdy_chk = 0; rdy_chk < 1000; rdy_chk++) {
+				reg_data.word0 =
+					readl(phba->sli4_hba.u.if_type2.
+					      STATUSregaddr);
+				if (bf_get(lpfc_sliport_status_rdy, &reg_data))
+					break;
+				if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
+					reset_again++;
+					break;
+				}
+				msleep(10);
+			}
+
+			/*
+			 * If the port responds to the init request with
+			 * reset needed, delay for a bit and restart the loop.
+			 */
+			if (reset_again) {
+				msleep(10);
+				reset_again = 0;
+				continue;
+			}
+
+			/* Detect any port errors. */
+			reg_data.word0 = readl(phba->sli4_hba.u.if_type2.
+					       STATUSregaddr);
+			if ((bf_get(lpfc_sliport_status_err, &reg_data)) ||
+			    (rdy_chk >= 1000)) {
+				phba->work_status[0] = readl(
+					phba->sli4_hba.u.if_type2.ERR1regaddr);
+				phba->work_status[1] = readl(
+					phba->sli4_hba.u.if_type2.ERR2regaddr);
+				lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2890 Port Error Detected "
+					"during Port Reset: "
+					"port status reg 0x%x, "
+					"error 1=0x%x, error 2=0x%x\n",
+					reg_data.word0,
+					phba->work_status[0],
+					phba->work_status[1]);
+				rc = -ENODEV;
+			}
+
+			/*
+			 * Terminate the outer loop provided the Port indicated
+			 * ready within 10 seconds.
+			 */
+			if (rdy_chk < 1000)
+				break;
+		}
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_1:
+	default:
+		break;
 	}
+
+	/* Catch the not-ready port failure after a port reset. */
+	if (num_resets >= MAX_IF_TYPE_2_RESETS)
+		rc = -ENODEV;
+
 	return rc;
 }
 
@@ -6536,6 +6901,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
 	struct pci_dev *pdev;
 	unsigned long bar0map_len, bar1map_len, bar2map_len;
 	int error = -ENODEV;
+	uint32_t if_type;
 
 	/* Obtain PCI device reference */
 	if (!phba->pcidev)
@@ -6552,61 +6918,105 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
 		}
 	}
 
-	/* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
-	 * number of bytes required by each mapping. They are actually
-	 * mapping to the PCI BAR regions 0 or 1, 2, and 4 by the SLI4 device.
+	/*
+	 * The BARs and register set definitions and offset locations are
+	 * dependent on the if_type.
+	 */
+	if (pci_read_config_dword(pdev, LPFC_SLI_INTF,
+				  &phba->sli4_hba.sli_intf.word0)) {
+		return error;
+	}
+
+	/* There is no SLI3 failback for SLI4 devices. */
+	if (bf_get(lpfc_sli_intf_valid, &phba->sli4_hba.sli_intf) !=
+	    LPFC_SLI_INTF_VALID) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+				"2894 SLI_INTF reg contents invalid "
+				"sli_intf reg 0x%x\n",
+				phba->sli4_hba.sli_intf.word0);
+		return error;
+	}
+
+	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
+	/*
+	 * Get the bus address of SLI4 device Bar regions and the
+	 * number of bytes required by each mapping. The mapping of the
+	 * particular PCI BARs regions is dependent on the type of
+	 * SLI4 device.
 	 */
 	if (pci_resource_start(pdev, 0)) {
 		phba->pci_bar0_map = pci_resource_start(pdev, 0);
 		bar0map_len = pci_resource_len(pdev, 0);
+
+		/*
+		 * Map SLI4 PCI Config Space Register base to a kernel virtual
+		 * addr
+		 */
+		phba->sli4_hba.conf_regs_memmap_p =
+			ioremap(phba->pci_bar0_map, bar0map_len);
+		if (!phba->sli4_hba.conf_regs_memmap_p) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				   "ioremap failed for SLI4 PCI config "
+				   "registers.\n");
+			goto out;
+		}
+		/* Set up BAR0 PCI config space register memory map */
+		lpfc_sli4_bar0_register_memmap(phba, if_type);
 	} else {
 		phba->pci_bar0_map = pci_resource_start(pdev, 1);
 		bar0map_len = pci_resource_len(pdev, 1);
-	}
-	phba->pci_bar1_map = pci_resource_start(pdev, 2);
-	bar1map_len = pci_resource_len(pdev, 2);
-
-	phba->pci_bar2_map = pci_resource_start(pdev, 4);
-	bar2map_len = pci_resource_len(pdev, 4);
-
-	/* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
-	phba->sli4_hba.conf_regs_memmap_p =
+		if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+			dev_printk(KERN_ERR, &pdev->dev,
+			   "FATAL - No BAR0 mapping for SLI4, if_type 2\n");
+			goto out;
+		}
+		phba->sli4_hba.conf_regs_memmap_p =
 				ioremap(phba->pci_bar0_map, bar0map_len);
-	if (!phba->sli4_hba.conf_regs_memmap_p) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "ioremap failed for SLI4 PCI config registers.\n");
-		goto out;
+		if (!phba->sli4_hba.conf_regs_memmap_p) {
+			dev_printk(KERN_ERR, &pdev->dev,
+				"ioremap failed for SLI4 PCI config "
+				"registers.\n");
+				goto out;
+		}
+		lpfc_sli4_bar0_register_memmap(phba, if_type);
 	}
 
-	/* Map SLI4 HBA Control Register base to a kernel virtual address. */
-	phba->sli4_hba.ctrl_regs_memmap_p =
+	if (pci_resource_start(pdev, 2)) {
+		/*
+		 * Map SLI4 if type 0 HBA Control Register base to a kernel
+		 * virtual address and setup the registers.
+		 */
+		phba->pci_bar1_map = pci_resource_start(pdev, 2);
+		bar1map_len = pci_resource_len(pdev, 2);
+		phba->sli4_hba.ctrl_regs_memmap_p =
 				ioremap(phba->pci_bar1_map, bar1map_len);
-	if (!phba->sli4_hba.ctrl_regs_memmap_p) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		if (!phba->sli4_hba.ctrl_regs_memmap_p) {
+			dev_printk(KERN_ERR, &pdev->dev,
 			   "ioremap failed for SLI4 HBA control registers.\n");
-		goto out_iounmap_conf;
+			goto out_iounmap_conf;
+		}
+		lpfc_sli4_bar1_register_memmap(phba);
 	}
 
-	/* Map SLI4 HBA Doorbell Register base to a kernel virtual address. */
-	phba->sli4_hba.drbl_regs_memmap_p =
+	if (pci_resource_start(pdev, 4)) {
+		/*
+		 * Map SLI4 if type 0 HBA Doorbell Register base to a kernel
+		 * virtual address and setup the registers.
+		 */
+		phba->pci_bar2_map = pci_resource_start(pdev, 4);
+		bar2map_len = pci_resource_len(pdev, 4);
+		phba->sli4_hba.drbl_regs_memmap_p =
 				ioremap(phba->pci_bar2_map, bar2map_len);
-	if (!phba->sli4_hba.drbl_regs_memmap_p) {
-		dev_printk(KERN_ERR, &pdev->dev,
+		if (!phba->sli4_hba.drbl_regs_memmap_p) {
+			dev_printk(KERN_ERR, &pdev->dev,
 			   "ioremap failed for SLI4 HBA doorbell registers.\n");
-		goto out_iounmap_ctrl;
+			goto out_iounmap_ctrl;
+		}
+		error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
+		if (error)
+			goto out_iounmap_all;
 	}
 
-	/* Set up BAR0 PCI config space register memory map */
-	lpfc_sli4_bar0_register_memmap(phba);
-
-	/* Set up BAR1 register memory map */
-	lpfc_sli4_bar1_register_memmap(phba);
-
-	/* Set up BAR2 register memory map */
-	error = lpfc_sli4_bar2_register_memmap(phba, LPFC_VF0);
-	if (error)
-		goto out_iounmap_all;
-
 	return 0;
 
 out_iounmap_all:
@@ -8149,6 +8559,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 		goto out_unset_driver_resource_s4;
 	}
 
+	INIT_LIST_HEAD(&phba->active_rrq_list);
+
 	/* Set up common device driver resources */
 	error = lpfc_setup_driver_resource_phase2(phba);
 	if (error) {
@@ -8218,7 +8630,11 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid)
 				"0451 Configure interrupt mode (%d) "
 				"failed active interrupt test.\n",
 				intr_mode);
-		/* Unset the preivous SLI-4 HBA setup */
+		/* Unset the previous SLI-4 HBA setup. */
+		/*
+		 * TODO:  Is this operation compatible with IF TYPE 2
+		 * devices?  All port state is deleted and cleared.
+		 */
 		lpfc_sli4_unset_hba(phba);
 		/* Try next level of interrupt mode */
 		cfg_mode = --intr_mode;
@@ -8990,6 +9406,10 @@ static struct pci_device_id lpfc_id_table[] = {
 		PCI_ANY_ID, PCI_ANY_ID, },
 	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BALIUS,
 		PCI_ANY_ID, PCI_ANY_ID, },
+	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FC,
+		PCI_ANY_ID, PCI_ANY_ID, },
+	{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE,
+		PCI_ANY_ID, PCI_ANY_ID, },
 	{ 0 }
 };
 
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index bb59e927312..e3b790e5915 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -33,7 +33,7 @@
 #define LOG_FCP_ERROR	0x00001000	/* log errors, not underruns */
 #define LOG_LIBDFC	0x00002000	/* Libdfc events */
 #define LOG_VPORT	0x00004000	/* NPIV events */
-#define LOF_SECURITY	0x00008000	/* Security events */
+#define LOG_SECURITY	0x00008000	/* Security events */
 #define LOG_EVENT	0x00010000	/* CT,TEMP,DUMP, logging */
 #define LOG_FIP		0x00020000	/* FIP events */
 #define LOG_ALL_MSG	0xffffffff	/* LOG all messages */
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 62d0957e1d4..23403c65020 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -263,18 +263,19 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
 }
 
 /**
- * lpfc_read_la - Prepare a mailbox command for reading HBA link attention
+ * lpfc_read_topology - Prepare a mailbox command for reading HBA topology
  * @phba: pointer to lpfc hba data structure.
  * @pmb: pointer to the driver internal queue element for mailbox command.
  * @mp: DMA buffer memory for reading the link attention information into.
  *
- * The read link attention mailbox command is issued to read the Link Event
- * Attention information indicated by the HBA port when the Link Event bit
- * of the Host Attention (HSTATT) register is set to 1. A Link Event
+ * The read topology mailbox command is issued to read the link topology
+ * information indicated by the HBA port when the Link Event bit of the Host
+ * Attention (HSTATT) register is set to 1 (For SLI-3) or when an FC Link
+ * Attention ACQE is received from the port (For SLI-4). A Link Event
  * Attention occurs based on an exception detected at the Fibre Channel link
  * interface.
  *
- * This routine prepares the mailbox command for reading HBA link attention
+ * This routine prepares the mailbox command for reading HBA link topology
  * information. A DMA memory has been set aside and address passed to the
  * HBA through @mp for the HBA to DMA link attention information into the
  * memory as part of the execution of the mailbox command.
@@ -283,7 +284,8 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
  *    0 - Success (currently always return 0)
  **/
 int
-lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp)
+lpfc_read_topology(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb,
+		   struct lpfc_dmabuf *mp)
 {
 	MAILBOX_t *mb;
 	struct lpfc_sli *psli;
@@ -293,15 +295,15 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp)
 	memset(pmb, 0, sizeof (LPFC_MBOXQ_t));
 
 	INIT_LIST_HEAD(&mp->list);
-	mb->mbxCommand = MBX_READ_LA64;
-	mb->un.varReadLA.un.lilpBde64.tus.f.bdeSize = 128;
-	mb->un.varReadLA.un.lilpBde64.addrHigh = putPaddrHigh(mp->phys);
-	mb->un.varReadLA.un.lilpBde64.addrLow = putPaddrLow(mp->phys);
+	mb->mbxCommand = MBX_READ_TOPOLOGY;
+	mb->un.varReadTop.lilpBde64.tus.f.bdeSize = LPFC_ALPA_MAP_SIZE;
+	mb->un.varReadTop.lilpBde64.addrHigh = putPaddrHigh(mp->phys);
+	mb->un.varReadTop.lilpBde64.addrLow = putPaddrLow(mp->phys);
 
 	/* Save address for later completion and set the owner to host so that
 	 * the FW knows this mailbox is available for processing.
 	 */
-	pmb->context1 = (uint8_t *) mp;
+	pmb->context1 = (uint8_t *)mp;
 	mb->mbxOwner = OWN_HOST;
 	return (0);
 }
@@ -516,18 +518,33 @@ lpfc_init_link(struct lpfc_hba * phba,
 	vpd = &phba->vpd;
 	if (vpd->rev.feaLevelHigh >= 0x02){
 		switch(linkspeed){
-			case LINK_SPEED_1G:
-			case LINK_SPEED_2G:
-			case LINK_SPEED_4G:
-			case LINK_SPEED_8G:
-				mb->un.varInitLnk.link_flags |=
-							FLAGS_LINK_SPEED;
-				mb->un.varInitLnk.link_speed = linkspeed;
+		case LPFC_USER_LINK_SPEED_1G:
+			mb->un.varInitLnk.link_flags |= FLAGS_LINK_SPEED;
+			mb->un.varInitLnk.link_speed = LINK_SPEED_1G;
+			break;
+		case LPFC_USER_LINK_SPEED_2G:
+			mb->un.varInitLnk.link_flags |=	FLAGS_LINK_SPEED;
+			mb->un.varInitLnk.link_speed = LINK_SPEED_2G;
+			break;
+		case LPFC_USER_LINK_SPEED_4G:
+			mb->un.varInitLnk.link_flags |=	FLAGS_LINK_SPEED;
+			mb->un.varInitLnk.link_speed = LINK_SPEED_4G;
+			break;
+		case LPFC_USER_LINK_SPEED_8G:
+			mb->un.varInitLnk.link_flags |=	FLAGS_LINK_SPEED;
+			mb->un.varInitLnk.link_speed = LINK_SPEED_8G;
+			break;
+		case LPFC_USER_LINK_SPEED_10G:
+			mb->un.varInitLnk.link_flags |=	FLAGS_LINK_SPEED;
+			mb->un.varInitLnk.link_speed = LINK_SPEED_10G;
 			break;
-			case LINK_SPEED_AUTO:
-			default:
-				mb->un.varInitLnk.link_speed =
-							LINK_SPEED_AUTO;
+		case LPFC_USER_LINK_SPEED_16G:
+			mb->un.varInitLnk.link_flags |=	FLAGS_LINK_SPEED;
+			mb->un.varInitLnk.link_speed = LINK_SPEED_16G;
+			break;
+		case LPFC_USER_LINK_SPEED_AUTO:
+		default:
+			mb->un.varInitLnk.link_speed = LINK_SPEED_AUTO;
 			break;
 		}
 
@@ -693,7 +710,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
  * @did: remote port identifier.
  * @param: pointer to memory holding the server parameters.
  * @pmb: pointer to the driver internal queue element for mailbox command.
- * @flag: action flag to be passed back for the complete function.
+ * @rpi: the rpi to use in the registration (usually only used for SLI4.
  *
  * The registration login mailbox command is used to register an N_Port or
  * F_Port login. This registration allows the HBA to cache the remote N_Port
@@ -712,7 +729,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
  **/
 int
 lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
-	       uint8_t *param, LPFC_MBOXQ_t *pmb, uint32_t flag)
+	     uint8_t *param, LPFC_MBOXQ_t *pmb, uint16_t rpi)
 {
 	MAILBOX_t *mb = &pmb->u.mb;
 	uint8_t *sparam;
@@ -722,17 +739,13 @@ lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
 
 	mb->un.varRegLogin.rpi = 0;
 	if (phba->sli_rev == LPFC_SLI_REV4) {
-		mb->un.varRegLogin.rpi = lpfc_sli4_alloc_rpi(phba);
+		mb->un.varRegLogin.rpi = rpi;
 		if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR)
 			return 1;
 	}
-
 	mb->un.varRegLogin.vpi = vpi + phba->vpi_base;
 	mb->un.varRegLogin.did = did;
-	mb->un.varWords[30] = flag;	/* Set flag to issue action on cmpl */
-
 	mb->mbxOwner = OWN_HOST;
-
 	/* Get a buffer to hold NPorts Service Parameters */
 	mp = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
 	if (mp)
@@ -743,7 +756,7 @@ lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
 		/* REG_LOGIN: no buffers */
 		lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX,
 				"0302 REG_LOGIN: no buffers, VPI:%d DID:x%x, "
-				"flag x%x\n", vpi, did, flag);
+				"rpi x%x\n", vpi, did, rpi);
 		return (1);
 	}
 	INIT_LIST_HEAD(&mp->list);
@@ -1918,11 +1931,14 @@ lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport)
 	struct lpfc_mbx_init_vfi *init_vfi;
 
 	memset(mbox, 0, sizeof(*mbox));
+	mbox->vport = vport;
 	init_vfi = &mbox->u.mqe.un.init_vfi;
 	bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VFI);
 	bf_set(lpfc_init_vfi_vr, init_vfi, 1);
 	bf_set(lpfc_init_vfi_vt, init_vfi, 1);
+	bf_set(lpfc_init_vfi_vp, init_vfi, 1);
 	bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base);
+	bf_set(lpfc_init_vpi_vpi, init_vfi, vport->vpi + vport->phba->vpi_base);
 	bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi);
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 8f879e477e9..cbb48ee8b0b 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -113,11 +113,16 @@ lpfc_mem_alloc(struct lpfc_hba *phba, int align)
 		goto fail_free_mbox_pool;
 
 	if (phba->sli_rev == LPFC_SLI_REV4) {
+		phba->rrq_pool =
+			mempool_create_kmalloc_pool(LPFC_MEM_POOL_SIZE,
+						sizeof(struct lpfc_node_rrq));
+		if (!phba->rrq_pool)
+			goto fail_free_nlp_mem_pool;
 		phba->lpfc_hrb_pool = pci_pool_create("lpfc_hrb_pool",
 					      phba->pcidev,
 					      LPFC_HDR_BUF_SIZE, align, 0);
 		if (!phba->lpfc_hrb_pool)
-			goto fail_free_nlp_mem_pool;
+			goto fail_free_rrq_mem_pool;
 
 		phba->lpfc_drb_pool = pci_pool_create("lpfc_drb_pool",
 					      phba->pcidev,
@@ -147,6 +152,9 @@ lpfc_mem_alloc(struct lpfc_hba *phba, int align)
  fail_free_hrb_pool:
 	pci_pool_destroy(phba->lpfc_hrb_pool);
 	phba->lpfc_hrb_pool = NULL;
+ fail_free_rrq_mem_pool:
+	mempool_destroy(phba->rrq_pool);
+	phba->rrq_pool = NULL;
  fail_free_nlp_mem_pool:
 	mempool_destroy(phba->nlp_mem_pool);
 	phba->nlp_mem_pool = NULL;
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index bccc9c66fa3..d85a7423a69 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -386,7 +386,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		goto out;
 
 	rc = lpfc_reg_rpi(phba, vport->vpi, icmd->un.rcvels.remoteID,
-			    (uint8_t *) sp, mbox, 0);
+			    (uint8_t *) sp, mbox, ndlp->nlp_rpi);
 	if (rc) {
 		mempool_free(mbox, phba->mbox_mem_pool);
 		goto out;
@@ -632,7 +632,7 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 
-	if (!(ndlp->nlp_flag & NLP_RPI_VALID)) {
+	if (!(ndlp->nlp_flag & NLP_RPI_REGISTERED)) {
 		ndlp->nlp_flag &= ~NLP_NPR_ADISC;
 		return 0;
 	}
@@ -968,7 +968,7 @@ lpfc_cmpl_plogi_plogi_issue(struct lpfc_vport *vport,
 	lpfc_unreg_rpi(vport, ndlp);
 
 	if (lpfc_reg_rpi(phba, vport->vpi, irsp->un.elsreq64.remoteID,
-			   (uint8_t *) sp, mbox, 0) == 0) {
+			 (uint8_t *) sp, mbox, ndlp->nlp_rpi) == 0) {
 		switch (ndlp->nlp_DID) {
 		case NameServer_DID:
 			mbox->mbox_cmpl = lpfc_mbx_cmpl_ns_reg_login;
@@ -1338,12 +1338,6 @@ lpfc_rcv_logo_reglogin_issue(struct lpfc_vport *vport,
 	list_for_each_entry_safe(mb, nextmb, &phba->sli.mboxq, list) {
 		if ((mb->u.mb.mbxCommand == MBX_REG_LOGIN64) &&
 		   (ndlp == (struct lpfc_nodelist *) mb->context2)) {
-			if (phba->sli_rev == LPFC_SLI_REV4) {
-				spin_unlock_irq(&phba->hbalock);
-				lpfc_sli4_free_rpi(phba,
-					mb->u.mb.un.varRegLogin.rpi);
-				spin_lock_irq(&phba->hbalock);
-			}
 			mp = (struct lpfc_dmabuf *) (mb->context1);
 			if (mp) {
 				__lpfc_mbuf_free(phba, mp->virt, mp->phys);
@@ -1426,7 +1420,7 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport,
 	}
 
 	ndlp->nlp_rpi = mb->un.varWords[0];
-	ndlp->nlp_flag |= NLP_RPI_VALID;
+	ndlp->nlp_flag |= NLP_RPI_REGISTERED;
 
 	/* Only if we are not a fabric nport do we issue PRLI */
 	if (!(ndlp->nlp_type & NLP_FABRIC)) {
@@ -2027,7 +2021,7 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_vport *vport,
 
 	if (!mb->mbxStatus) {
 		ndlp->nlp_rpi = mb->un.varWords[0];
-		ndlp->nlp_flag |= NLP_RPI_VALID;
+		ndlp->nlp_flag |= NLP_RPI_REGISTERED;
 	} else {
 		if (ndlp->nlp_flag & NLP_NODEV_REMOVE) {
 			lpfc_drop_node(vport, ndlp);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index f64b65a770b..c97751c95d7 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -621,10 +621,13 @@ lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
 			  struct sli4_wcqe_xri_aborted *axri)
 {
 	uint16_t xri = bf_get(lpfc_wcqe_xa_xri, axri);
+	uint16_t rxid = bf_get(lpfc_wcqe_xa_remote_xid, axri);
 	struct lpfc_scsi_buf *psb, *next_psb;
 	unsigned long iflag = 0;
 	struct lpfc_iocbq *iocbq;
 	int i;
+	struct lpfc_nodelist *ndlp;
+	int rrq_empty = 0;
 	struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
 
 	spin_lock_irqsave(&phba->hbalock, iflag);
@@ -637,8 +640,14 @@ lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
 			psb->status = IOSTAT_SUCCESS;
 			spin_unlock(
 				&phba->sli4_hba.abts_scsi_buf_list_lock);
+			ndlp = psb->rdata->pnode;
+			rrq_empty = list_empty(&phba->active_rrq_list);
 			spin_unlock_irqrestore(&phba->hbalock, iflag);
+			if (ndlp)
+				lpfc_set_rrq_active(phba, ndlp, xri, rxid, 1);
 			lpfc_release_scsi_buf_s4(phba, psb);
+			if (rrq_empty)
+				lpfc_worker_wake_up(phba);
 			return;
 		}
 	}
@@ -914,7 +923,7 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
 }
 
 /**
- * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * lpfc_get_scsi_buf_s3 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
  * @phba: The HBA for which this call is being executed.
  *
  * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
@@ -925,7 +934,7 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport, int num_to_alloc)
  *   Pointer to lpfc_scsi_buf - Success
  **/
 static struct lpfc_scsi_buf*
-lpfc_get_scsi_buf(struct lpfc_hba * phba)
+lpfc_get_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 {
 	struct  lpfc_scsi_buf * lpfc_cmd = NULL;
 	struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
@@ -941,6 +950,67 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
 	spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
 	return  lpfc_cmd;
 }
+/**
+ * lpfc_get_scsi_buf_s4 - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * @phba: The HBA for which this call is being executed.
+ *
+ * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
+ * and returns to caller.
+ *
+ * Return codes:
+ *   NULL - Error
+ *   Pointer to lpfc_scsi_buf - Success
+ **/
+static struct lpfc_scsi_buf*
+lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
+{
+	struct  lpfc_scsi_buf *lpfc_cmd = NULL;
+	struct  lpfc_scsi_buf *start_lpfc_cmd = NULL;
+	struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
+	unsigned long iflag = 0;
+	int found = 0;
+
+	spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+	list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list);
+	spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
+	while (!found && lpfc_cmd) {
+		if (lpfc_test_rrq_active(phba, ndlp,
+					 lpfc_cmd->cur_iocbq.sli4_xritag)) {
+			lpfc_release_scsi_buf_s4(phba, lpfc_cmd);
+			spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
+			list_remove_head(scsi_buf_list, lpfc_cmd,
+					 struct lpfc_scsi_buf, list);
+			spin_unlock_irqrestore(&phba->scsi_buf_list_lock,
+						 iflag);
+			if (lpfc_cmd == start_lpfc_cmd) {
+				lpfc_cmd = NULL;
+				break;
+			} else
+				continue;
+		}
+		found = 1;
+		lpfc_cmd->seg_cnt = 0;
+		lpfc_cmd->nonsg_phys = 0;
+		lpfc_cmd->prot_seg_cnt = 0;
+	}
+	return  lpfc_cmd;
+}
+/**
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
+ * @phba: The HBA for which this call is being executed.
+ *
+ * This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
+ * and returns to caller.
+ *
+ * Return codes:
+ *   NULL - Error
+ *   Pointer to lpfc_scsi_buf - Success
+ **/
+static struct lpfc_scsi_buf*
+lpfc_get_scsi_buf(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
+{
+	return  phba->lpfc_get_scsi_buf(phba, ndlp);
+}
 
 /**
  * lpfc_release_scsi_buf - Return a scsi buffer back to hba scsi buf list
@@ -2744,18 +2814,19 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 
 	phba->lpfc_scsi_unprep_dma_buf = lpfc_scsi_unprep_dma_buf;
 	phba->lpfc_scsi_prep_cmnd = lpfc_scsi_prep_cmnd;
-	phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
 
 	switch (dev_grp) {
 	case LPFC_PCI_DEV_LP:
 		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s3;
 		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s3;
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s3;
+		phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s3;
 		break;
 	case LPFC_PCI_DEV_OC:
 		phba->lpfc_new_scsi_buf = lpfc_new_scsi_buf_s4;
 		phba->lpfc_scsi_prep_dma_buf = lpfc_scsi_prep_dma_buf_s4;
 		phba->lpfc_release_scsi_buf = lpfc_release_scsi_buf_s4;
+		phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf_s4;
 		break;
 	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -2764,7 +2835,6 @@ lpfc_scsi_api_table_setup(struct lpfc_hba *phba, uint8_t dev_grp)
 		return -ENODEV;
 		break;
 	}
-	phba->lpfc_get_scsi_buf = lpfc_get_scsi_buf;
 	phba->lpfc_rampdown_queue_depth = lpfc_rampdown_queue_depth;
 	phba->lpfc_scsi_cmd_iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
 	return 0;
@@ -2899,7 +2969,7 @@ void lpfc_poll_timeout(unsigned long ptr)
  *   SCSI_MLQUEUE_HOST_BUSY - Block all devices served by this host temporarily.
  **/
 static int
-lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
+lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 {
 	struct Scsi_Host  *shost = cmnd->device->host;
 	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
@@ -2940,7 +3010,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth)
 		goto out_host_busy;
 
-	lpfc_cmd = lpfc_get_scsi_buf(phba);
+	lpfc_cmd = lpfc_get_scsi_buf(phba, ndlp);
 	if (lpfc_cmd == NULL) {
 		lpfc_rampdown_queue_depth(phba);
 
@@ -3060,6 +3130,8 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(lpfc_queuecommand)
+
 /**
  * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
  * @cmnd: Pointer to scsi_cmnd data structure.
@@ -3237,7 +3309,7 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata,
 	if (!pnode || !NLP_CHK_NODE_ACT(pnode))
 		return FAILED;
 
-	lpfc_cmd = lpfc_get_scsi_buf(phba);
+	lpfc_cmd = lpfc_get_scsi_buf(phba, rdata->pnode);
 	if (lpfc_cmd == NULL)
 		return FAILED;
 	lpfc_cmd->timeout = 60;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 554efa6623f..634b2fea9c4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -513,8 +513,344 @@ __lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
 }
 
 /**
+ * __lpfc_set_rrq_active - set RRQ active bit in the ndlp's xri_bitmap.
+ * @phba: Pointer to HBA context object.
+ * @ndlp: nodelist pointer for this target.
+ * @xritag: xri used in this exchange.
+ * @rxid: Remote Exchange ID.
+ * @send_rrq: Flag used to determine if we should send rrq els cmd.
+ *
+ * This function is called with hbalock held.
+ * The active bit is set in the ndlp's active rrq xri_bitmap. Allocates an
+ * rrq struct and adds it to the active_rrq_list.
+ *
+ * returns  0 for rrq slot for this xri
+ *         < 0  Were not able to get rrq mem or invalid parameter.
+ **/
+static int
+__lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
+		uint16_t xritag, uint16_t rxid, uint16_t send_rrq)
+{
+	uint16_t adj_xri;
+	struct lpfc_node_rrq *rrq;
+	int empty;
+
+	/*
+	 * set the active bit even if there is no mem available.
+	 */
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (!ndlp)
+		return -EINVAL;
+	if (test_and_set_bit(adj_xri, ndlp->active_rrqs.xri_bitmap))
+		return -EINVAL;
+	rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL);
+	if (rrq) {
+		rrq->send_rrq = send_rrq;
+		rrq->xritag = xritag;
+		rrq->rrq_stop_time = jiffies + HZ * (phba->fc_ratov + 1);
+		rrq->ndlp = ndlp;
+		rrq->nlp_DID = ndlp->nlp_DID;
+		rrq->vport = ndlp->vport;
+		rrq->rxid = rxid;
+		empty = list_empty(&phba->active_rrq_list);
+		if (phba->cfg_enable_rrq && send_rrq)
+			/*
+			 * We need the xri before we can add this to the
+			 * phba active rrq list.
+			 */
+			rrq->send_rrq = send_rrq;
+		else
+			rrq->send_rrq = 0;
+		list_add_tail(&rrq->list, &phba->active_rrq_list);
+		if (!(phba->hba_flag & HBA_RRQ_ACTIVE)) {
+			phba->hba_flag |= HBA_RRQ_ACTIVE;
+			if (empty)
+				lpfc_worker_wake_up(phba);
+		}
+		return 0;
+	}
+	return -ENOMEM;
+}
+
+/**
+ * __lpfc_clr_rrq_active - Clears RRQ active bit in xri_bitmap.
+ * @phba: Pointer to HBA context object.
+ * @xritag: xri used in this exchange.
+ * @rrq: The RRQ to be cleared.
+ *
+ * This function is called with hbalock held. This function
+ **/
+static void
+__lpfc_clr_rrq_active(struct lpfc_hba *phba,
+			uint16_t xritag,
+			struct lpfc_node_rrq *rrq)
+{
+	uint16_t adj_xri;
+	struct lpfc_nodelist *ndlp;
+
+	ndlp = lpfc_findnode_did(rrq->vport, rrq->nlp_DID);
+
+	/* The target DID could have been swapped (cable swap)
+	 * we should use the ndlp from the findnode if it is
+	 * available.
+	 */
+	if (!ndlp)
+		ndlp = rrq->ndlp;
+
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (test_and_clear_bit(adj_xri, ndlp->active_rrqs.xri_bitmap)) {
+		rrq->send_rrq = 0;
+		rrq->xritag = 0;
+		rrq->rrq_stop_time = 0;
+	}
+	mempool_free(rrq, phba->rrq_pool);
+}
+
+/**
+ * lpfc_handle_rrq_active - Checks if RRQ has waithed RATOV.
+ * @phba: Pointer to HBA context object.
+ *
+ * This function is called with hbalock held. This function
+ * Checks if stop_time (ratov from setting rrq active) has
+ * been reached, if it has and the send_rrq flag is set then
+ * it will call lpfc_send_rrq. If the send_rrq flag is not set
+ * then it will just call the routine to clear the rrq and
+ * free the rrq resource.
+ * The timer is set to the next rrq that is going to expire before
+ * leaving the routine.
+ *
+ **/
+void
+lpfc_handle_rrq_active(struct lpfc_hba *phba)
+{
+	struct lpfc_node_rrq *rrq;
+	struct lpfc_node_rrq *nextrrq;
+	unsigned long next_time;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	phba->hba_flag &= ~HBA_RRQ_ACTIVE;
+	next_time = jiffies + HZ * (phba->fc_ratov + 1);
+	list_for_each_entry_safe(rrq, nextrrq,
+			&phba->active_rrq_list, list) {
+		if (time_after(jiffies, rrq->rrq_stop_time)) {
+			list_del(&rrq->list);
+			if (!rrq->send_rrq)
+				/* this call will free the rrq */
+				__lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
+			else {
+			/* if we send the rrq then the completion handler
+			 *  will clear the bit in the xribitmap.
+			 */
+				spin_unlock_irqrestore(&phba->hbalock, iflags);
+				if (lpfc_send_rrq(phba, rrq)) {
+					lpfc_clr_rrq_active(phba, rrq->xritag,
+								 rrq);
+				}
+				spin_lock_irqsave(&phba->hbalock, iflags);
+			}
+		} else if  (time_before(rrq->rrq_stop_time, next_time))
+			next_time = rrq->rrq_stop_time;
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	if (!list_empty(&phba->active_rrq_list))
+		mod_timer(&phba->rrq_tmr, next_time);
+}
+
+/**
+ * lpfc_get_active_rrq - Get the active RRQ for this exchange.
+ * @vport: Pointer to vport context object.
+ * @xri: The xri used in the exchange.
+ * @did: The targets DID for this exchange.
+ *
+ * returns NULL = rrq not found in the phba->active_rrq_list.
+ *         rrq = rrq for this xri and target.
+ **/
+struct lpfc_node_rrq *
+lpfc_get_active_rrq(struct lpfc_vport *vport, uint16_t xri, uint32_t did)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_node_rrq *rrq;
+	struct lpfc_node_rrq *nextrrq;
+	unsigned long iflags;
+
+	if (phba->sli_rev != LPFC_SLI_REV4)
+		return NULL;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_for_each_entry_safe(rrq, nextrrq, &phba->active_rrq_list, list) {
+		if (rrq->vport == vport && rrq->xritag == xri &&
+				rrq->nlp_DID == did){
+			list_del(&rrq->list);
+			spin_unlock_irqrestore(&phba->hbalock, iflags);
+			return rrq;
+		}
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return NULL;
+}
+
+/**
+ * lpfc_cleanup_vports_rrqs - Remove and clear the active RRQ for this vport.
+ * @vport: Pointer to vport context object.
+ *
+ * Remove all active RRQs for this vport from the phba->active_rrq_list and
+ * clear the rrq.
+ **/
+void
+lpfc_cleanup_vports_rrqs(struct lpfc_vport *vport)
+
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_node_rrq *rrq;
+	struct lpfc_node_rrq *nextrrq;
+	unsigned long iflags;
+
+	if (phba->sli_rev != LPFC_SLI_REV4)
+		return;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_for_each_entry_safe(rrq, nextrrq, &phba->active_rrq_list, list) {
+		if (rrq->vport == vport) {
+			list_del(&rrq->list);
+			__lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
+		}
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+}
+
+/**
+ * lpfc_cleanup_wt_rrqs - Remove all rrq's from the active list.
+ * @phba: Pointer to HBA context object.
+ *
+ * Remove all rrqs from the phba->active_rrq_list and free them by
+ * calling __lpfc_clr_active_rrq
+ *
+ **/
+void
+lpfc_cleanup_wt_rrqs(struct lpfc_hba *phba)
+{
+	struct lpfc_node_rrq *rrq;
+	struct lpfc_node_rrq *nextrrq;
+	unsigned long next_time;
+	unsigned long iflags;
+
+	if (phba->sli_rev != LPFC_SLI_REV4)
+		return;
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	phba->hba_flag &= ~HBA_RRQ_ACTIVE;
+	next_time = jiffies + HZ * (phba->fc_ratov * 2);
+	list_for_each_entry_safe(rrq, nextrrq, &phba->active_rrq_list, list) {
+		list_del(&rrq->list);
+		__lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
+	}
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	if (!list_empty(&phba->active_rrq_list))
+		mod_timer(&phba->rrq_tmr, next_time);
+}
+
+
+/**
+ * __lpfc_test_rrq_active - Test RRQ bit in xri_bitmap.
+ * @phba: Pointer to HBA context object.
+ * @ndlp: Targets nodelist pointer for this exchange.
+ * @xritag the xri in the bitmap to test.
+ *
+ * This function is called with hbalock held. This function
+ * returns 0 = rrq not active for this xri
+ *         1 = rrq is valid for this xri.
+ **/
+static int
+__lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
+			uint16_t  xritag)
+{
+	uint16_t adj_xri;
+
+	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
+	if (!ndlp)
+		return 0;
+	if (test_bit(adj_xri, ndlp->active_rrqs.xri_bitmap))
+			return 1;
+	else
+		return 0;
+}
+
+/**
+ * lpfc_set_rrq_active - set RRQ active bit in xri_bitmap.
+ * @phba: Pointer to HBA context object.
+ * @ndlp: nodelist pointer for this target.
+ * @xritag: xri used in this exchange.
+ * @rxid: Remote Exchange ID.
+ * @send_rrq: Flag used to determine if we should send rrq els cmd.
+ *
+ * This function takes the hbalock.
+ * The active bit is always set in the active rrq xri_bitmap even
+ * if there is no slot avaiable for the other rrq information.
+ *
+ * returns 0 rrq actived for this xri
+ *         < 0 No memory or invalid ndlp.
+ **/
+int
+lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
+			uint16_t xritag, uint16_t rxid, uint16_t send_rrq)
+{
+	int ret;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	ret = __lpfc_set_rrq_active(phba, ndlp, xritag, rxid, send_rrq);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return ret;
+}
+
+/**
+ * lpfc_clr_rrq_active - Clears RRQ active bit in xri_bitmap.
+ * @phba: Pointer to HBA context object.
+ * @xritag: xri used in this exchange.
+ * @rrq: The RRQ to be cleared.
+ *
+ * This function is takes the hbalock.
+ **/
+void
+lpfc_clr_rrq_active(struct lpfc_hba *phba,
+			uint16_t xritag,
+			struct lpfc_node_rrq *rrq)
+{
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	__lpfc_clr_rrq_active(phba, xritag, rrq);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return;
+}
+
+
+
+/**
+ * lpfc_test_rrq_active - Test RRQ bit in xri_bitmap.
+ * @phba: Pointer to HBA context object.
+ * @ndlp: Targets nodelist pointer for this exchange.
+ * @xritag the xri in the bitmap to test.
+ *
+ * This function takes the hbalock.
+ * returns 0 = rrq not active for this xri
+ *         1 = rrq is valid for this xri.
+ **/
+int
+lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
+			uint16_t  xritag)
+{
+	int ret;
+	unsigned long iflags;
+
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	ret = __lpfc_test_rrq_active(phba, ndlp, xritag);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+	return ret;
+}
+
+/**
  * __lpfc_sli_get_sglq - Allocates an iocb object from sgl pool
  * @phba: Pointer to HBA context object.
+ * @piocb: Pointer to the iocbq.
  *
  * This function is called with hbalock held. This function
  * Gets a new driver sglq object from the sglq list. If the
@@ -522,17 +858,51 @@ __lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag)
  * allocated sglq object else it returns NULL.
  **/
 static struct lpfc_sglq *
-__lpfc_sli_get_sglq(struct lpfc_hba *phba)
+__lpfc_sli_get_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq)
 {
 	struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list;
 	struct lpfc_sglq *sglq = NULL;
+	struct lpfc_sglq *start_sglq = NULL;
 	uint16_t adj_xri;
+	struct lpfc_scsi_buf *lpfc_cmd;
+	struct lpfc_nodelist *ndlp;
+	int found = 0;
+
+	if (piocbq->iocb_flag &  LPFC_IO_FCP) {
+		lpfc_cmd = (struct lpfc_scsi_buf *) piocbq->context1;
+		ndlp = lpfc_cmd->rdata->pnode;
+	} else  if ((piocbq->iocb.ulpCommand == CMD_GEN_REQUEST64_CR) &&
+			!(piocbq->iocb_flag & LPFC_IO_LIBDFC))
+		ndlp = piocbq->context_un.ndlp;
+	else
+		ndlp = piocbq->context1;
+
 	list_remove_head(lpfc_sgl_list, sglq, struct lpfc_sglq, list);
-	if (!sglq)
-		return NULL;
-	adj_xri = sglq->sli4_xritag - phba->sli4_hba.max_cfg_param.xri_base;
-	phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
-	sglq->state = SGL_ALLOCATED;
+	start_sglq = sglq;
+	while (!found) {
+		if (!sglq)
+			return NULL;
+		adj_xri = sglq->sli4_xritag -
+				phba->sli4_hba.max_cfg_param.xri_base;
+		if (__lpfc_test_rrq_active(phba, ndlp, sglq->sli4_xritag)) {
+			/* This xri has an rrq outstanding for this DID.
+			 * put it back in the list and get another xri.
+			 */
+			list_add_tail(&sglq->list, lpfc_sgl_list);
+			sglq = NULL;
+			list_remove_head(lpfc_sgl_list, sglq,
+						struct lpfc_sglq, list);
+			if (sglq == start_sglq) {
+				sglq = NULL;
+				break;
+			} else
+				continue;
+		}
+		sglq->ndlp = ndlp;
+		found = 1;
+		phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq;
+		sglq->state = SGL_ALLOCATED;
+	}
 	return sglq;
 }
 
@@ -598,6 +968,7 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 				&phba->sli4_hba.abts_sgl_list_lock, iflag);
 		} else {
 			sglq->state = SGL_FREED;
+			sglq->ndlp = NULL;
 			list_add(&sglq->list, &phba->sli4_hba.lpfc_sgl_list);
 
 			/* Check if TXQ queue needs to be serviced */
@@ -1634,7 +2005,6 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
 	case MBX_READ_LNK_STAT:
 	case MBX_REG_LOGIN:
 	case MBX_UNREG_LOGIN:
-	case MBX_READ_LA:
 	case MBX_CLEAR_LA:
 	case MBX_DUMP_MEMORY:
 	case MBX_DUMP_CONTEXT:
@@ -1656,7 +2026,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
 	case MBX_READ_SPARM64:
 	case MBX_READ_RPI64:
 	case MBX_REG_LOGIN64:
-	case MBX_READ_LA64:
+	case MBX_READ_TOPOLOGY:
 	case MBX_WRITE_WWN:
 	case MBX_SET_DEBUG:
 	case MBX_LOAD_EXP_ROM:
@@ -1746,11 +2116,6 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		kfree(mp);
 	}
 
-	if ((pmb->u.mb.mbxCommand == MBX_UNREG_LOGIN) &&
-	    (phba->sli_rev == LPFC_SLI_REV4) &&
-	    (pmb->u.mb.un.varUnregLogin.rsvd1 == 0x0))
-		lpfc_sli4_free_rpi(phba, pmb->u.mb.un.varUnregLogin.rpi);
-
 	/*
 	 * If a REG_LOGIN succeeded  after node is destroyed or node
 	 * is in re-discovery driver need to cleanup the RPI.
@@ -3483,12 +3848,6 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
 	phba->pport->fc_myDID = 0;
 	phba->pport->fc_prevDID = 0;
 
-	/* Turn off parity checking and serr during the physical reset */
-	pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
-	pci_write_config_word(phba->pcidev, PCI_COMMAND,
-			      (cfg_value &
-			      ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
-
 	spin_lock_irq(&phba->hbalock);
 	psli->sli_flag &= ~(LPFC_PROCESS_LA);
 	phba->fcf.fcf_flag = 0;
@@ -3508,9 +3867,18 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba)
 	/* Now physically reset the device */
 	lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
 			"0389 Performing PCI function reset!\n");
+
+	/* Turn off parity checking and serr during the physical reset */
+	pci_read_config_word(phba->pcidev, PCI_COMMAND, &cfg_value);
+	pci_write_config_word(phba->pcidev, PCI_COMMAND, (cfg_value &
+			      ~(PCI_COMMAND_PARITY | PCI_COMMAND_SERR)));
+
 	/* Perform FCoE PCI function reset */
 	lpfc_pci_function_reset(phba);
 
+	/* Restore PCI cmd register */
+	pci_write_config_word(phba->pcidev, PCI_COMMAND, cfg_value);
+
 	return 0;
 }
 
@@ -4317,6 +4685,10 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	struct lpfc_vport *vport = phba->pport;
 	struct lpfc_dmabuf *mp;
 
+	/*
+	 * TODO:  Why does this routine execute these task in a different
+	 * order from probe?
+	 */
 	/* Perform a PCI function reset to start from clean */
 	rc = lpfc_pci_function_reset(phba);
 	if (unlikely(rc))
@@ -4357,13 +4729,16 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	}
 
 	rc = lpfc_sli4_read_rev(phba, mboxq, vpd, &vpd_size);
-	if (unlikely(rc))
-		goto out_free_vpd;
-
+	if (unlikely(rc)) {
+		kfree(vpd);
+		goto out_free_mbox;
+	}
 	mqe = &mboxq->u.mqe;
 	phba->sli_rev = bf_get(lpfc_mbx_rd_rev_sli_lvl, &mqe->un.read_rev);
 	if (bf_get(lpfc_mbx_rd_rev_fcoe, &mqe->un.read_rev))
-		phba->hba_flag |= HBA_FCOE_SUPPORT;
+		phba->hba_flag |= HBA_FCOE_MODE;
+	else
+		phba->hba_flag &= ~HBA_FCOE_MODE;
 
 	if (bf_get(lpfc_mbx_rd_rev_cee_ver, &mqe->un.read_rev) ==
 		LPFC_DCBX_CEE_MODE)
@@ -4372,13 +4747,14 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 		phba->hba_flag &= ~HBA_FIP_SUPPORT;
 
 	if (phba->sli_rev != LPFC_SLI_REV4 ||
-	    !(phba->hba_flag & HBA_FCOE_SUPPORT)) {
+	    !(phba->hba_flag & HBA_FCOE_MODE)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
 			"0376 READ_REV Error. SLI Level %d "
 			"FCoE enabled %d\n",
-			phba->sli_rev, phba->hba_flag & HBA_FCOE_SUPPORT);
+			phba->sli_rev, phba->hba_flag & HBA_FCOE_MODE);
 		rc = -EIO;
-		goto out_free_vpd;
+		kfree(vpd);
+		goto out_free_mbox;
 	}
 	/*
 	 * Evaluate the read rev and vpd data. Populate the driver
@@ -4392,6 +4768,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 				"Using defaults.\n", rc);
 		rc = 0;
 	}
+	kfree(vpd);
 
 	/* Save information as VPD data */
 	phba->vpd.rev.biuRev = mqe->un.read_rev.first_hw_rev;
@@ -4428,7 +4805,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
 	if (unlikely(rc)) {
 		rc = -EIO;
-		goto out_free_vpd;
+		goto out_free_mbox;
 	}
 
 	/*
@@ -4476,7 +4853,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	if (rc) {
 		phba->link_state = LPFC_HBA_ERROR;
 		rc = -ENOMEM;
-		goto out_free_vpd;
+		goto out_free_mbox;
 	}
 
 	mboxq->vport = vport;
@@ -4501,7 +4878,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 				rc, bf_get(lpfc_mqe_status, mqe));
 		phba->link_state = LPFC_HBA_ERROR;
 		rc = -EIO;
-		goto out_free_vpd;
+		goto out_free_mbox;
 	}
 
 	if (phba->cfg_soft_wwnn)
@@ -4526,7 +4903,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 				"0582 Error %d during sgl post operation\n",
 					rc);
 		rc = -ENODEV;
-		goto out_free_vpd;
+		goto out_free_mbox;
 	}
 
 	/* Register SCSI SGL pool to the device */
@@ -4538,7 +4915,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 		/* Some Scsi buffers were moved to the abort scsi list */
 		/* A pci function reset will repost them */
 		rc = -ENODEV;
-		goto out_free_vpd;
+		goto out_free_mbox;
 	}
 
 	/* Post the rpi header region to the device. */
@@ -4548,7 +4925,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 				"0393 Error %d during rpi post operation\n",
 				rc);
 		rc = -ENODEV;
-		goto out_free_vpd;
+		goto out_free_mbox;
 	}
 
 	/* Set up all the queues to the device */
@@ -4608,33 +4985,33 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 		}
 	}
 
+	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+		/*
+		 * The FC Port needs to register FCFI (index 0)
+		 */
+		lpfc_reg_fcfi(phba, mboxq);
+		mboxq->vport = phba->pport;
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+		if (rc == MBX_SUCCESS)
+			rc = 0;
+		else
+			goto out_unset_queue;
+	}
 	/*
 	 * The port is ready, set the host's link state to LINK_DOWN
 	 * in preparation for link interrupts.
 	 */
-	lpfc_init_link(phba, mboxq, phba->cfg_topology, phba->cfg_link_speed);
-	mboxq->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
-	lpfc_set_loopback_flag(phba);
-	/* Change driver state to LPFC_LINK_DOWN right before init link */
 	spin_lock_irq(&phba->hbalock);
 	phba->link_state = LPFC_LINK_DOWN;
 	spin_unlock_irq(&phba->hbalock);
-	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_NOWAIT);
-	if (unlikely(rc != MBX_NOT_FINISHED)) {
-		kfree(vpd);
-		return 0;
-	} else
-		rc = -EIO;
-
+	rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
+out_unset_queue:
 	/* Unset all the queues set up in this routine when error out */
 	if (rc)
 		lpfc_sli4_queue_unset(phba);
-
 out_stop_timers:
 	if (rc)
 		lpfc_stop_hba_timers(phba);
-out_free_vpd:
-	kfree(vpd);
 out_free_mbox:
 	mempool_free(mboxq, phba->mbox_mem_pool);
 	return rc;
@@ -5863,6 +6240,8 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
 	IOCB_t *icmd;
 	int numBdes = 0;
 	int i = 0;
+	uint32_t offset = 0; /* accumulated offset in the sg request list */
+	int inbound = 0; /* number of sg reply entries inbound from firmware */
 
 	if (!piocbq || !sglq)
 		return xritag;
@@ -5897,6 +6276,20 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq,
 			 */
 			bde.tus.w = le32_to_cpu(bpl->tus.w);
 			sgl->sge_len = cpu_to_le32(bde.tus.f.bdeSize);
+			/* The offsets in the sgl need to be accumulated
+			 * separately for the request and reply lists.
+			 * The request is always first, the reply follows.
+			 */
+			if (piocbq->iocb.ulpCommand == CMD_GEN_REQUEST64_CR) {
+				/* add up the reply sg entries */
+				if (bpl->tus.f.bdeFlags == BUFF_TYPE_BDE_64I)
+					inbound++;
+				/* first inbound? reset the offset */
+				if (inbound == 1)
+					offset = 0;
+				bf_set(lpfc_sli4_sge_offset, sgl, offset);
+				offset += bde.tus.f.bdeSize;
+			}
 			bpl++;
 			sgl++;
 		}
@@ -6028,11 +6421,6 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		bf_set(els_req64_vf, &wqe->els_req, 0);
 		/* And a VFID for word 12 */
 		bf_set(els_req64_vfid, &wqe->els_req, 0);
-		/*
-		 * Set ct field to 3, indicates that the context_tag field
-		 * contains the FCFI and remote N_Port_ID is
-		 * in word 5.
-		 */
 		ct = ((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l);
 		bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
 		       iocbq->iocb.ulpContext);
@@ -6140,6 +6528,18 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq,
 		bf_set(wqe_ebde_cnt, &wqe->fcp_icmd.wqe_com, 0);
 	break;
 	case CMD_GEN_REQUEST64_CR:
+		/* For this command calculate the xmit length of the
+		 * request bde.
+		 */
+		xmit_len = 0;
+		numBdes = iocbq->iocb.un.genreq64.bdl.bdeSize /
+			sizeof(struct ulp_bde64);
+		for (i = 0; i < numBdes; i++) {
+			if (bpl[i].tus.f.bdeFlags != BUFF_TYPE_BDE_64)
+				break;
+			bde.tus.w = le32_to_cpu(bpl[i].tus.w);
+			xmit_len += bde.tus.f.bdeSize;
+		}
 		/* word3 iocb=IO_TAG wqe=request_payload_len */
 		wqe->gen_req.request_payload_len = xmit_len;
 		/* word4 iocb=parameter wqe=relative_offset memcpy */
@@ -6320,7 +6720,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number,
 					return IOCB_BUSY;
 				}
 			} else {
-			sglq = __lpfc_sli_get_sglq(phba);
+			sglq = __lpfc_sli_get_sglq(phba, piocb);
 				if (!sglq) {
 					if (!(flag & SLI_IOCB_RET_IOCB)) {
 						__lpfc_sli_ringtx_put(phba,
@@ -8033,29 +8433,66 @@ static int
 lpfc_sli4_eratt_read(struct lpfc_hba *phba)
 {
 	uint32_t uerr_sta_hi, uerr_sta_lo;
+	uint32_t if_type, portsmphr;
+	struct lpfc_register portstat_reg;
 
-	/* For now, use the SLI4 device internal unrecoverable error
+	/*
+	 * For now, use the SLI4 device internal unrecoverable error
 	 * registers for error attention. This can be changed later.
 	 */
-	uerr_sta_lo = readl(phba->sli4_hba.UERRLOregaddr);
-	uerr_sta_hi = readl(phba->sli4_hba.UERRHIregaddr);
-	if ((~phba->sli4_hba.ue_mask_lo & uerr_sta_lo) ||
-	    (~phba->sli4_hba.ue_mask_hi & uerr_sta_hi)) {
+	if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
+	switch (if_type) {
+	case LPFC_SLI_INTF_IF_TYPE_0:
+		uerr_sta_lo = readl(phba->sli4_hba.u.if_type0.UERRLOregaddr);
+		uerr_sta_hi = readl(phba->sli4_hba.u.if_type0.UERRHIregaddr);
+		if ((~phba->sli4_hba.ue_mask_lo & uerr_sta_lo) ||
+		    (~phba->sli4_hba.ue_mask_hi & uerr_sta_hi)) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"1423 HBA Unrecoverable error: "
+					"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
+					"ue_mask_lo_reg=0x%x, "
+					"ue_mask_hi_reg=0x%x\n",
+					uerr_sta_lo, uerr_sta_hi,
+					phba->sli4_hba.ue_mask_lo,
+					phba->sli4_hba.ue_mask_hi);
+			phba->work_status[0] = uerr_sta_lo;
+			phba->work_status[1] = uerr_sta_hi;
+			phba->work_ha |= HA_ERATT;
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			return 1;
+		}
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_2:
+		portstat_reg.word0 =
+			readl(phba->sli4_hba.u.if_type2.STATUSregaddr);
+		portsmphr = readl(phba->sli4_hba.PSMPHRregaddr);
+		if (bf_get(lpfc_sliport_status_err, &portstat_reg)) {
+			phba->work_status[0] =
+				readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
+			phba->work_status[1] =
+				readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
+			lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+					"2885 Port Error Detected: "
+					"port status reg 0x%x, "
+					"port smphr reg 0x%x, "
+					"error 1=0x%x, error 2=0x%x\n",
+					portstat_reg.word0,
+					portsmphr,
+					phba->work_status[0],
+					phba->work_status[1]);
+			phba->work_ha |= HA_ERATT;
+			phba->hba_flag |= HBA_ERATT_HANDLED;
+			return 1;
+		}
+		break;
+	case LPFC_SLI_INTF_IF_TYPE_1:
+	default:
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
-				"1423 HBA Unrecoverable error: "
-				"uerr_lo_reg=0x%x, uerr_hi_reg=0x%x, "
-				"ue_mask_lo_reg=0x%x, ue_mask_hi_reg=0x%x\n",
-				uerr_sta_lo, uerr_sta_hi,
-				phba->sli4_hba.ue_mask_lo,
-				phba->sli4_hba.ue_mask_hi);
-		phba->work_status[0] = uerr_sta_lo;
-		phba->work_status[1] = uerr_sta_hi;
-		/* Set the driver HA work bitmap */
-		phba->work_ha |= HA_ERATT;
-		/* Indicate polling handles this ERATT */
-		phba->hba_flag |= HBA_ERATT_HANDLED;
+				"2886 HBA Error Attention on unsupported "
+				"if type %d.", if_type);
 		return 1;
 	}
+
 	return 0;
 }
 
@@ -8110,7 +8547,7 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
 		ha_copy = lpfc_sli_eratt_read(phba);
 		break;
 	case LPFC_SLI_REV4:
-		/* Read devcie Uncoverable Error (UERR) registers */
+		/* Read device Uncoverable Error (UERR) registers */
 		ha_copy = lpfc_sli4_eratt_read(phba);
 		break;
 	default:
@@ -10155,16 +10592,20 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
 			 length, LPFC_SLI4_MBX_EMBED);
 
 	mq_create_ext = &mbox->u.mqe.un.mq_create_ext;
-	bf_set(lpfc_mbx_mq_create_ext_num_pages, &mq_create_ext->u.request,
-		    mq->page_count);
-	bf_set(lpfc_mbx_mq_create_ext_async_evt_link, &mq_create_ext->u.request,
-	       1);
-	bf_set(lpfc_mbx_mq_create_ext_async_evt_fcfste,
+	bf_set(lpfc_mbx_mq_create_ext_num_pages,
+	       &mq_create_ext->u.request, mq->page_count);
+	bf_set(lpfc_mbx_mq_create_ext_async_evt_link,
+	       &mq_create_ext->u.request, 1);
+	bf_set(lpfc_mbx_mq_create_ext_async_evt_fip,
 	       &mq_create_ext->u.request, 1);
 	bf_set(lpfc_mbx_mq_create_ext_async_evt_group5,
 	       &mq_create_ext->u.request, 1);
-	bf_set(lpfc_mq_context_cq_id, &mq_create_ext->u.request.context,
-	       cq->queue_id);
+	bf_set(lpfc_mbx_mq_create_ext_async_evt_fc,
+	       &mq_create_ext->u.request, 1);
+	bf_set(lpfc_mbx_mq_create_ext_async_evt_sli,
+	       &mq_create_ext->u.request, 1);
+	bf_set(lpfc_mq_context_cq_id,
+	       &mq_create_ext->u.request.context, cq->queue_id);
 	bf_set(lpfc_mq_context_valid, &mq_create_ext->u.request.context, 1);
 	switch (mq->entry_count) {
 	default:
@@ -11137,7 +11578,8 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist,
 static int
 lpfc_fc_frame_check(struct lpfc_hba *phba, struct fc_frame_header *fc_hdr)
 {
-	char *rctl_names[] = FC_RCTL_NAMES_INIT;
+	/*  make rctl_names static to save stack space */
+	static char *rctl_names[] = FC_RCTL_NAMES_INIT;
 	char *type_names[] = FC_TYPE_NAMES_INIT;
 	struct fc_vft_header *fc_vft_hdr;
 
@@ -11538,6 +11980,10 @@ lpfc_sli4_seq_abort_acc(struct lpfc_hba *phba,
 				"SID:x%x\n", oxid, sid);
 		return;
 	}
+	if (rxid >= phba->sli4_hba.max_cfg_param.xri_base
+		&& rxid <= (phba->sli4_hba.max_cfg_param.max_xri
+		+ phba->sli4_hba.max_cfg_param.xri_base))
+		lpfc_set_rrq_active(phba, ndlp, rxid, oxid, 0);
 
 	/* Allocate buffer for acc iocb */
 	ctiocb = lpfc_sli_get_iocbq(phba);
@@ -11560,6 +12006,7 @@ lpfc_sli4_seq_abort_acc(struct lpfc_hba *phba,
 	icmd->ulpLe = 1;
 	icmd->ulpClass = CLASS3;
 	icmd->ulpContext = ndlp->nlp_rpi;
+	ctiocb->context1 = ndlp;
 
 	ctiocb->iocb_cmpl = NULL;
 	ctiocb->vport = phba->pport;
@@ -12129,42 +12576,37 @@ lpfc_sli4_resume_rpi(struct lpfc_nodelist *ndlp)
 
 /**
  * lpfc_sli4_init_vpi - Initialize a vpi with the port
- * @phba: pointer to lpfc hba data structure.
- * @vpi: vpi value to activate with the port.
+ * @vport: Pointer to the vport for which the vpi is being initialized
  *
- * This routine is invoked to activate a vpi with the
- * port when the host intends to use vports with a
- * nonzero vpi.
+ * This routine is invoked to activate a vpi with the port.
  *
  * Returns:
  *    0 success
  *    -Evalue otherwise
  **/
 int
-lpfc_sli4_init_vpi(struct lpfc_hba *phba, uint16_t vpi)
+lpfc_sli4_init_vpi(struct lpfc_vport *vport)
 {
 	LPFC_MBOXQ_t *mboxq;
 	int rc = 0;
 	int retval = MBX_SUCCESS;
 	uint32_t mbox_tmo;
-
-	if (vpi == 0)
-		return -EINVAL;
+	struct lpfc_hba *phba = vport->phba;
 	mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
 	if (!mboxq)
 		return -ENOMEM;
-	lpfc_init_vpi(phba, mboxq, vpi);
+	lpfc_init_vpi(phba, mboxq, vport->vpi);
 	mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_INIT_VPI);
 	rc = lpfc_sli_issue_mbox_wait(phba, mboxq, mbox_tmo);
 	if (rc != MBX_SUCCESS) {
-		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+		lpfc_printf_vlog(vport, KERN_ERR, LOG_SLI,
 				"2022 INIT VPI Mailbox failed "
 				"status %d, mbxStatus x%x\n", rc,
 				bf_get(lpfc_mqe_status, &mboxq->u.mqe));
 		retval = -EIO;
 	}
 	if (rc != MBX_TIMEOUT)
-		mempool_free(mboxq, phba->mbox_mem_pool);
+		mempool_free(mboxq, vport->phba->mbox_mem_pool);
 
 	return retval;
 }
@@ -12854,6 +13296,7 @@ lpfc_cleanup_pending_mbox(struct lpfc_vport *vport)
 	struct lpfc_nodelist *act_mbx_ndlp = NULL;
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	LIST_HEAD(mbox_cmd_list);
+	uint8_t restart_loop;
 
 	/* Clean up internally queued mailbox commands with the vport */
 	spin_lock_irq(&phba->hbalock);
@@ -12882,15 +13325,44 @@ lpfc_cleanup_pending_mbox(struct lpfc_vport *vport)
 			mb->mbox_flag |= LPFC_MBX_IMED_UNREG;
 		}
 	}
+	/* Cleanup any mailbox completions which are not yet processed */
+	do {
+		restart_loop = 0;
+		list_for_each_entry(mb, &phba->sli.mboxq_cmpl, list) {
+			/*
+			 * If this mailox is already processed or it is
+			 * for another vport ignore it.
+			 */
+			if ((mb->vport != vport) ||
+				(mb->mbox_flag & LPFC_MBX_IMED_UNREG))
+				continue;
+
+			if ((mb->u.mb.mbxCommand != MBX_REG_LOGIN64) &&
+				(mb->u.mb.mbxCommand != MBX_REG_VPI))
+				continue;
+
+			mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+			if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
+				ndlp = (struct lpfc_nodelist *)mb->context2;
+				/* Unregister the RPI when mailbox complete */
+				mb->mbox_flag |= LPFC_MBX_IMED_UNREG;
+				restart_loop = 1;
+				spin_unlock_irq(&phba->hbalock);
+				spin_lock(shost->host_lock);
+				ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
+				spin_unlock(shost->host_lock);
+				spin_lock_irq(&phba->hbalock);
+				break;
+			}
+		}
+	} while (restart_loop);
+
 	spin_unlock_irq(&phba->hbalock);
 
 	/* Release the cleaned-up mailbox commands */
 	while (!list_empty(&mbox_cmd_list)) {
 		list_remove_head(&mbox_cmd_list, mb, LPFC_MBOXQ_t, list);
 		if (mb->u.mb.mbxCommand == MBX_REG_LOGIN64) {
-			if (phba->sli_rev == LPFC_SLI_REV4)
-				__lpfc_sli4_free_rpi(phba,
-						mb->u.mb.un.varRegLogin.rpi);
 			mp = (struct lpfc_dmabuf *) (mb->context1);
 			if (mp) {
 				__lpfc_mbuf_free(phba, mp->virt, mp->phys);
@@ -12948,12 +13420,13 @@ lpfc_drain_txq(struct lpfc_hba *phba)
 	while (pring->txq_cnt) {
 		spin_lock_irqsave(&phba->hbalock, iflags);
 
-		sglq = __lpfc_sli_get_sglq(phba);
+		piocbq = lpfc_sli_ringtx_get(phba, pring);
+		sglq = __lpfc_sli_get_sglq(phba, piocbq);
 		if (!sglq) {
+			__lpfc_sli_ringtx_put(phba, pring, piocbq);
 			spin_unlock_irqrestore(&phba->hbalock, iflags);
 			break;
 		} else {
-			piocbq = lpfc_sli_ringtx_get(phba, pring);
 			if (!piocbq) {
 				/* The txq_cnt out of sync. This should
 				 * never happen
diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h
index cd56d6cce6c..453577c21c1 100644
--- a/drivers/scsi/lpfc/lpfc_sli.h
+++ b/drivers/scsi/lpfc/lpfc_sli.h
@@ -34,9 +34,11 @@ struct lpfc_cq_event {
 	union {
 		struct lpfc_mcqe		mcqe_cmpl;
 		struct lpfc_acqe_link		acqe_link;
-		struct lpfc_acqe_fcoe		acqe_fcoe;
+		struct lpfc_acqe_fip		acqe_fip;
 		struct lpfc_acqe_dcbx		acqe_dcbx;
 		struct lpfc_acqe_grp5		acqe_grp5;
+		struct lpfc_acqe_fc_la		acqe_fc;
+		struct lpfc_acqe_sli		acqe_sli;
 		struct lpfc_rcqe		rcqe_cmpl;
 		struct sli4_wcqe_xri_aborted	wcqe_axri;
 		struct lpfc_wcqe_complete	wcqe_cmpl;
@@ -82,6 +84,7 @@ struct lpfc_iocbq {
 		struct lpfc_iocbq    *rsp_iocb;
 		struct lpfcMboxq     *mbox;
 		struct lpfc_nodelist *ndlp;
+		struct lpfc_node_rrq *rrq;
 	} context_un;
 
 	void (*fabric_iocb_cmpl) (struct lpfc_hba *, struct lpfc_iocbq *,
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index c4483feb8b7..c7217d579e0 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -137,9 +137,11 @@ struct lpfc_sli4_link {
 	uint8_t speed;
 	uint8_t duplex;
 	uint8_t status;
-	uint8_t physical;
+	uint8_t type;
+	uint8_t number;
 	uint8_t fault;
 	uint16_t logical_speed;
+	uint16_t topology;
 };
 
 struct lpfc_fcf_rec {
@@ -367,23 +369,39 @@ struct lpfc_sli4_hba {
 					     PCI BAR1, control registers */
 	void __iomem *drbl_regs_memmap_p; /* Kernel memory mapped address for
 					     PCI BAR2, doorbell registers */
-	/* BAR0 PCI config space register memory map */
-	void __iomem *UERRLOregaddr; /* Address to UERR_STATUS_LO register */
-	void __iomem *UERRHIregaddr; /* Address to UERR_STATUS_HI register */
-	void __iomem *UEMASKLOregaddr; /* Address to UE_MASK_LO register */
-	void __iomem *UEMASKHIregaddr; /* Address to UE_MASK_HI register */
-	void __iomem *SLIINTFregaddr; /* Address to SLI_INTF register */
-	/* BAR1 FCoE function CSR register memory map */
-	void __iomem *STAregaddr;    /* Address to HST_STATE register */
-	void __iomem *ISRregaddr;    /* Address to HST_ISR register */
-	void __iomem *IMRregaddr;    /* Address to HST_IMR register */
-	void __iomem *ISCRregaddr;   /* Address to HST_ISCR register */
-	/* BAR2 VF-0 doorbell register memory map */
-	void __iomem *RQDBregaddr;   /* Address to RQ_DOORBELL register */
-	void __iomem *WQDBregaddr;   /* Address to WQ_DOORBELL register */
-	void __iomem *EQCQDBregaddr; /* Address to EQCQ_DOORBELL register */
-	void __iomem *MQDBregaddr;   /* Address to MQ_DOORBELL register */
-	void __iomem *BMBXregaddr;   /* Address to BootStrap MBX register */
+	union {
+		struct {
+			/* IF Type 0, BAR 0 PCI cfg space reg mem map */
+			void __iomem *UERRLOregaddr;
+			void __iomem *UERRHIregaddr;
+			void __iomem *UEMASKLOregaddr;
+			void __iomem *UEMASKHIregaddr;
+		} if_type0;
+		struct {
+			/* IF Type 2, BAR 0 PCI cfg space reg mem map. */
+			void __iomem *STATUSregaddr;
+			void __iomem *CTRLregaddr;
+			void __iomem *ERR1regaddr;
+			void __iomem *ERR2regaddr;
+		} if_type2;
+	} u;
+
+	/* IF type 0, BAR1 and if type 2, Bar 0 CSR register memory map */
+	void __iomem *PSMPHRregaddr;
+
+	/* Well-known SLI INTF register memory map. */
+	void __iomem *SLIINTFregaddr;
+
+	/* IF type 0, BAR 1 function CSR register memory map */
+	void __iomem *ISRregaddr;	/* HST_ISR register */
+	void __iomem *IMRregaddr;	/* HST_IMR register */
+	void __iomem *ISCRregaddr;	/* HST_ISCR register */
+	/* IF type 0, BAR 0 and if type 2, BAR 0 doorbell register memory map */
+	void __iomem *RQDBregaddr;	/* RQ_DOORBELL register */
+	void __iomem *WQDBregaddr;	/* WQ_DOORBELL register */
+	void __iomem *EQCQDBregaddr;	/* EQCQ_DOORBELL register */
+	void __iomem *MQDBregaddr;	/* MQ_DOORBELL register */
+	void __iomem *BMBXregaddr;	/* BootStrap MBX register */
 
 	uint32_t ue_mask_lo;
 	uint32_t ue_mask_hi;
@@ -466,6 +484,7 @@ struct lpfc_sglq {
 	struct list_head clist;
 	enum lpfc_sge_type buff_type; /* is this a scsi sgl */
 	enum lpfc_sgl_state state;
+	struct lpfc_nodelist *ndlp; /* ndlp associated with IO */
 	uint16_t iotag;         /* pre-assigned IO tag */
 	uint16_t sli4_xritag;   /* pre-assigned XRI, (OXID) tag. */
 	struct sli4_sge *sgl;	/* pre-assigned SGL */
@@ -532,7 +551,6 @@ int lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *);
 struct lpfc_rpi_hdr *lpfc_sli4_create_rpi_hdr(struct lpfc_hba *);
 void lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *);
 int lpfc_sli4_alloc_rpi(struct lpfc_hba *);
-void __lpfc_sli4_free_rpi(struct lpfc_hba *, int);
 void lpfc_sli4_free_rpi(struct lpfc_hba *, int);
 void lpfc_sli4_remove_rpis(struct lpfc_hba *);
 void lpfc_sli4_async_event_proc(struct lpfc_hba *);
@@ -548,7 +566,7 @@ int lpfc_sli4_brdreset(struct lpfc_hba *);
 int lpfc_sli4_add_fcf_record(struct lpfc_hba *, struct fcf_record *);
 void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
 int lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *);
-int lpfc_sli4_init_vpi(struct lpfc_hba *, uint16_t);
+int lpfc_sli4_init_vpi(struct lpfc_vport *);
 uint32_t lpfc_sli4_cq_release(struct lpfc_queue *, bool);
 uint32_t lpfc_sli4_eq_release(struct lpfc_queue *, bool);
 void lpfc_sli4_fcfi_unreg(struct lpfc_hba *, uint16_t);
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 7a1b5b112a0..386cf92de49 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.18"
+#define LPFC_DRIVER_VERSION "8.3.20"
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
 #define LPFC_FP_DRIVER_HANDLER_NAME	"lpfc:fp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index a5281ce893d..6b8d2952e32 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -395,8 +395,8 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 	 * by the port.
 	 */
 	if ((phba->sli_rev == LPFC_SLI_REV4) &&
-		(pport->fc_flag & FC_VFI_REGISTERED)) {
-		rc = lpfc_sli4_init_vpi(phba, vpi);
+	    (pport->fc_flag & FC_VFI_REGISTERED)) {
+		rc = lpfc_sli4_init_vpi(vport);
 		if (rc) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
 					"1838 Failed to INIT_VPI on vpi %d "
@@ -418,7 +418,7 @@ lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
 
 	if ((phba->link_state < LPFC_LINK_UP) ||
 	    (pport->port_state < LPFC_FABRIC_CFG_LINK) ||
-	    (phba->fc_topology == TOPOLOGY_LOOP)) {
+	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
 		rc = VPORT_OK;
 		goto out;
@@ -514,7 +514,7 @@ enable_vport(struct fc_vport *fc_vport)
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 
 	if ((phba->link_state < LPFC_LINK_UP) ||
-	    (phba->fc_topology == TOPOLOGY_LOOP)) {
+	    (phba->fc_topology == LPFC_TOPOLOGY_LOOP)) {
 		lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
 		return VPORT_OK;
 	}
@@ -665,7 +665,7 @@ lpfc_vport_delete(struct fc_vport *fc_vport)
 	if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
 	    ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
 	    phba->link_state >= LPFC_LINK_UP &&
-	    phba->fc_topology != TOPOLOGY_LOOP) {
+	    phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
 		if (vport->cfg_enable_da_id) {
 			timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
 			if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0))
diff --git a/drivers/scsi/mac53c94.c b/drivers/scsi/mac53c94.c
index 3ddb4dc62d5..6c42dff0f4d 100644
--- a/drivers/scsi/mac53c94.c
+++ b/drivers/scsi/mac53c94.c
@@ -66,7 +66,7 @@ static void cmd_done(struct fsc_state *, int result);
 static void set_dma_cmds(struct fsc_state *, struct scsi_cmnd *);
 
 
-static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int mac53c94_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct fsc_state *state;
 
@@ -99,6 +99,8 @@ static int mac53c94_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *
 	return 0;
 }
 
+static DEF_SCSI_QCMD(mac53c94_queue)
+
 static int mac53c94_host_reset(struct scsi_cmnd *cmd)
 {
 	struct fsc_state *state = (struct fsc_state *) cmd->device->host->hostdata;
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index 7ceb5cf12c6..9aa048525eb 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -366,7 +366,7 @@ mega_runpendq(adapter_t *adapter)
  * The command queuing entry point for the mid-layer.
  */
 static int
-megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
+megaraid_queue_lck(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
 {
 	adapter_t	*adapter;
 	scb_t	*scb;
@@ -409,6 +409,8 @@ megaraid_queue(Scsi_Cmnd *scmd, void (*done)(Scsi_Cmnd *))
 	return busy;
 }
 
+static DEF_SCSI_QCMD(megaraid_queue)
+
 /**
  * mega_allocate_scb()
  * @adapter - pointer to our soft state
@@ -4456,7 +4458,7 @@ mega_internal_command(adapter_t *adapter, megacmd_t *mc, mega_passthru *pthru)
 
 	scb->idx = CMDID_INT_CMDS;
 
-	megaraid_queue(scmd, mega_internal_done);
+	megaraid_queue_lck(scmd, mega_internal_done);
 
 	wait_for_completion(&adapter->int_waitq);
 
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 2b4a048cadf..f5644745e24 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -987,7 +987,7 @@ static int mega_query_adapter(adapter_t *);
 static int issue_scb(adapter_t *, scb_t *);
 static int mega_setup_mailbox(adapter_t *);
 
-static int megaraid_queue (Scsi_Cmnd *, void (*)(Scsi_Cmnd *));
+static int megaraid_queue (struct Scsi_Host *, struct scsi_cmnd *);
 static scb_t * mega_build_cmd(adapter_t *, Scsi_Cmnd *, int *);
 static void __mega_runpendq(adapter_t *);
 static int issue_scb_block(adapter_t *, u_char *);
diff --git a/drivers/scsi/megaraid/Makefile b/drivers/scsi/megaraid/Makefile
index f469915b97c..5826ed509e3 100644
--- a/drivers/scsi/megaraid/Makefile
+++ b/drivers/scsi/megaraid/Makefile
@@ -1,3 +1,5 @@
 obj-$(CONFIG_MEGARAID_MM)	+= megaraid_mm.o
 obj-$(CONFIG_MEGARAID_MAILBOX)	+= megaraid_mbox.o
 obj-$(CONFIG_MEGARAID_SAS)	+= megaraid_sas.o
+megaraid_sas-objs := megaraid_sas_base.o megaraid_sas_fusion.o \
+	megaraid_sas_fp.o
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index a7810a106b3..5708cb27d07 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -113,8 +113,7 @@ static int megaraid_mbox_fire_sync_cmd(adapter_t *);
 static void megaraid_mbox_display_scb(adapter_t *, scb_t *);
 static void megaraid_mbox_setup_device_map(adapter_t *);
 
-static int megaraid_queue_command(struct scsi_cmnd *,
-		void (*)(struct scsi_cmnd *));
+static int megaraid_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static scb_t *megaraid_mbox_build_cmd(adapter_t *, struct scsi_cmnd *, int *);
 static void megaraid_mbox_runpendq(adapter_t *, scb_t *);
 static void megaraid_mbox_prepare_pthru(adapter_t *, scb_t *,
@@ -1484,7 +1483,7 @@ mbox_post_cmd(adapter_t *adapter, scb_t *scb)
  * Queue entry point for mailbox based controllers.
  */
 static int
-megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
+megaraid_queue_command_lck(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
 {
 	adapter_t	*adapter;
 	scb_t		*scb;
@@ -1513,6 +1512,8 @@ megaraid_queue_command(struct scsi_cmnd *scp, void (*done)(struct scsi_cmnd *))
 	return if_busy;
 }
 
+static DEF_SCSI_QCMD(megaraid_queue_command)
+
 /**
  * megaraid_mbox_build_cmd - transform the mid-layer scsi commands
  * @adapter	: controller's soft state
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index ad16f5e6004..1b5e375732c 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1,15 +1,30 @@
 /*
+ *  Linux MegaRAID driver for SAS based RAID controllers
  *
- *		Linux MegaRAID driver for SAS based RAID controllers
+ *  Copyright (c) 2009-2011  LSI Corporation.
  *
- * Copyright (c) 2003-2005  LSI Corporation.
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
  *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
  *
- * FILE		: megaraid_sas.h
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *  FILE: megaraid_sas.h
+ *
+ *  Authors: LSI Corporation
+ *
+ *  Send feedback to: <megaraidlinux@lsi.com>
+ *
+ *  Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
+ *     ATTN: Linuxraid
  */
 
 #ifndef LSI_MEGARAID_SAS_H
@@ -18,9 +33,9 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION			"00.00.04.31-rc1"
-#define MEGASAS_RELDATE			"May 3, 2010"
-#define MEGASAS_EXT_VERSION		"Mon. May 3, 11:41:51 PST 2010"
+#define MEGASAS_VERSION				"00.00.05.29-rc1"
+#define MEGASAS_RELDATE				"Dec. 7, 2010"
+#define MEGASAS_EXT_VERSION			"Tue. Dec. 7 17:00:00 PDT 2010"
 
 /*
  * Device IDs
@@ -32,6 +47,7 @@
 #define	PCI_DEVICE_ID_LSI_SAS0079GEN2		0x0079
 #define	PCI_DEVICE_ID_LSI_SAS0073SKINNY		0x0073
 #define	PCI_DEVICE_ID_LSI_SAS0071SKINNY		0x0071
+#define	PCI_DEVICE_ID_LSI_FUSION		0x005b
 
 /*
  * =====================================
@@ -421,7 +437,6 @@ struct megasas_ctrl_prop {
 	* Add properties that can be controlled by
 	* a bit in the following structure.
 	*/
-
 	struct {
 		u32     copyBackDisabled            : 1;
 		u32     SMARTerEnabled              : 1;
@@ -701,6 +716,7 @@ struct megasas_ctrl_info {
 #define MEGASAS_DEFAULT_INIT_ID			-1
 #define MEGASAS_MAX_LUN				8
 #define MEGASAS_MAX_LD				64
+#define MEGASAS_DEFAULT_CMD_PER_LUN		128
 #define MEGASAS_MAX_PD                          (MEGASAS_MAX_PD_CHANNELS * \
 						MEGASAS_MAX_DEV_PER_CHANNEL)
 #define MEGASAS_MAX_LD_IDS			(MEGASAS_MAX_LD_CHANNELS * \
@@ -769,7 +785,10 @@ struct megasas_ctrl_info {
 */
  
 struct megasas_register_set {
-	u32 	reserved_0[4];			/*0000h*/
+	u32	doorbell;                       /*0000h*/
+	u32	fusion_seq_offset;		/*0004h*/
+	u32	fusion_host_diag;		/*0008h*/
+	u32	reserved_01;			/*000Ch*/
 
 	u32 	inbound_msg_0;			/*0010h*/
 	u32 	inbound_msg_1;			/*0014h*/
@@ -789,15 +808,18 @@ struct megasas_register_set {
 	u32 	inbound_queue_port;		/*0040h*/
 	u32 	outbound_queue_port;		/*0044h*/
 
-	u32 	reserved_2[22];			/*0048h*/
+	u32	reserved_2[9];			/*0048h*/
+	u32	reply_post_host_index;		/*006Ch*/
+	u32	reserved_2_2[12];		/*0070h*/
 
 	u32 	outbound_doorbell_clear;	/*00A0h*/
 
 	u32 	reserved_3[3];			/*00A4h*/
 
 	u32 	outbound_scratch_pad ;		/*00B0h*/
+	u32	outbound_scratch_pad_2;         /*00B4h*/
 
-	u32 	reserved_4[3];			/*00B4h*/
+	u32	reserved_4[2];			/*00B8h*/
 
 	u32 	inbound_low_queue_port ;	/*00C0h*/
 
@@ -1272,6 +1294,9 @@ struct megasas_instance {
 
 	u16 max_num_sge;
 	u16 max_fw_cmds;
+	/* For Fusion its num IOCTL cmds, for others MFI based its
+	   max_fw_cmds */
+	u16 max_mfi_cmds;
 	u32 max_sectors_per_req;
 	struct megasas_aen_event *ev;
 
@@ -1320,6 +1345,16 @@ struct megasas_instance {
 
 	struct timer_list io_completion_timer;
 	struct list_head internal_reset_pending_q;
+
+	/* Ptr to hba specfic information */
+	void *ctrl_context;
+	u8	msi_flag;
+	struct msix_entry msixentry;
+	u64 map_id;
+	struct megasas_cmd *map_update_cmd;
+	unsigned long bar;
+	long reset_flags;
+	struct mutex reset_mutex;
 };
 
 enum {
@@ -1345,6 +1380,13 @@ struct megasas_instance_template {
 		struct megasas_register_set __iomem *);
 	int (*check_reset)(struct megasas_instance *, \
 		struct megasas_register_set __iomem *);
+	irqreturn_t (*service_isr)(int irq, void *devp);
+	void (*tasklet)(unsigned long);
+	u32 (*init_adapter)(struct megasas_instance *);
+	u32 (*build_and_issue_cmd) (struct megasas_instance *,
+				    struct scsi_cmnd *);
+	void (*issue_dcmd) (struct megasas_instance *instance,
+			    struct megasas_cmd *cmd);
 };
 
 #define MEGASAS_IS_LOGICAL(scp)						\
@@ -1371,7 +1413,13 @@ struct megasas_cmd {
 	struct list_head list;
 	struct scsi_cmnd *scmd;
 	struct megasas_instance *instance;
-	u32 frame_count;
+	union {
+		struct {
+			u16 smid;
+			u16 resvd;
+		} context;
+		u32 frame_count;
+	};
 };
 
 #define MAX_MGMT_ADAPTERS		1024
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index eb29d508513..5d6d07bd1cd 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1,27 +1,34 @@
 /*
+ *  Linux MegaRAID driver for SAS based RAID controllers
  *
- *		Linux MegaRAID driver for SAS based RAID controllers
+ *  Copyright (c) 2009-2011  LSI Corporation.
  *
- * Copyright (c) 2003-2005  LSI Corporation.
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
  *
- *	   This program is free software; you can redistribute it and/or
- *	   modify it under the terms of the GNU General Public License
- *	   as published by the Free Software Foundation; either version
- *	   2 of the License, or (at your option) any later version.
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
  *
- * FILE		: megaraid_sas.c
- * Version     : v00.00.04.31-rc1
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
- * Authors:
- *	(email-id : megaraidlinux@lsi.com)
- * 	Sreenivas Bagalkote
- * 	Sumant Patro
- *	Bo Yang
+ *  FILE: megaraid_sas_base.c
+ *  Version : v00.00.05.29-rc1
  *
- * List of supported controllers
+ *  Authors: LSI Corporation
+ *           Sreenivas Bagalkote
+ *           Sumant Patro
+ *           Bo Yang
  *
- * OEM	Product Name			VID	DID	SSVID	SSID
- * ---	------------			---	---	----	----
+ *  Send feedback to: <megaraidlinux@lsi.com>
+ *
+ *  Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
+ *     ATTN: Linuxraid
  */
 
 #include <linux/kernel.h>
@@ -46,6 +53,7 @@
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
 #include <scsi/scsi_host.h>
+#include "megaraid_sas_fusion.h"
 #include "megaraid_sas.h"
 
 /*
@@ -65,12 +73,16 @@ module_param_named(max_sectors, max_sectors, int, 0);
 MODULE_PARM_DESC(max_sectors,
 	"Maximum number of sectors per IO command");
 
+static int msix_disable;
+module_param(msix_disable, int, S_IRUGO);
+MODULE_PARM_DESC(msix_disable, "Disable MSI-X interrupt handling. Default: 0");
+
 MODULE_LICENSE("GPL");
 MODULE_VERSION(MEGASAS_VERSION);
 MODULE_AUTHOR("megaraidlinux@lsi.com");
 MODULE_DESCRIPTION("LSI MegaRAID SAS Driver");
 
-static int megasas_transition_to_ready(struct megasas_instance *instance);
+int megasas_transition_to_ready(struct megasas_instance *instance);
 static int megasas_get_pd_list(struct megasas_instance *instance);
 static int megasas_issue_init_mfi(struct megasas_instance *instance);
 static int megasas_register_aen(struct megasas_instance *instance,
@@ -98,6 +110,8 @@ static struct pci_device_id megasas_pci_table[] = {
 	/* xscale IOP, vega */
 	{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
 	/* xscale IOP */
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_FUSION)},
+	/* Fusion */
 	{}
 };
 
@@ -111,23 +125,55 @@ static DEFINE_MUTEX(megasas_async_queue_mutex);
 static int megasas_poll_wait_aen;
 static DECLARE_WAIT_QUEUE_HEAD(megasas_poll_wait);
 static u32 support_poll_for_event;
-static u32 megasas_dbg_lvl;
+u32 megasas_dbg_lvl;
 static u32 support_device_change;
 
 /* define lock for aen poll */
 spinlock_t poll_aen_lock;
 
-static void
+void
 megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
 		     u8 alt_status);
 
+static irqreturn_t megasas_isr(int irq, void *devp);
+static u32
+megasas_init_adapter_mfi(struct megasas_instance *instance);
+u32
+megasas_build_and_issue_cmd(struct megasas_instance *instance,
+			    struct scsi_cmnd *scmd);
+static void megasas_complete_cmd_dpc(unsigned long instance_addr);
+void
+megasas_release_fusion(struct megasas_instance *instance);
+int
+megasas_ioc_init_fusion(struct megasas_instance *instance);
+void
+megasas_free_cmds_fusion(struct megasas_instance *instance);
+u8
+megasas_get_map_info(struct megasas_instance *instance);
+int
+megasas_sync_map_info(struct megasas_instance *instance);
+int
+wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd);
+void megasas_reset_reply_desc(struct megasas_instance *instance);
+u8 MR_ValidateMapInfo(struct MR_FW_RAID_MAP_ALL *map,
+		      struct LD_LOAD_BALANCE_INFO *lbInfo);
+int megasas_reset_fusion(struct Scsi_Host *shost);
+void megasas_fusion_ocr_wq(struct work_struct *work);
+
+void
+megasas_issue_dcmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
+{
+	instance->instancet->fire_cmd(instance,
+		cmd->frame_phys_addr, 0, instance->reg_set);
+}
+
 /**
  * megasas_get_cmd -	Get a command from the free pool
  * @instance:		Adapter soft state
  *
  * Returns a free command from the pool
  */
-static struct megasas_cmd *megasas_get_cmd(struct megasas_instance
+struct megasas_cmd *megasas_get_cmd(struct megasas_instance
 						  *instance)
 {
 	unsigned long flags;
@@ -152,7 +198,7 @@ static struct megasas_cmd *megasas_get_cmd(struct megasas_instance
  * @instance:		Adapter soft state
  * @cmd:		Command packet to be returned to free command pool
  */
-static inline void
+inline void
 megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
 {
 	unsigned long flags;
@@ -160,6 +206,7 @@ megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
 	spin_lock_irqsave(&instance->cmd_pool_lock, flags);
 
 	cmd->scmd = NULL;
+	cmd->frame_count = 0;
 	list_add_tail(&cmd->list, &instance->cmd_pool);
 
 	spin_unlock_irqrestore(&instance->cmd_pool_lock, flags);
@@ -167,7 +214,7 @@ megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
 
 
 /**
-*	The following functions are defined for xscale 
+*	The following functions are defined for xscale
 *	(deviceid : 1064R, PERC5) controllers
 */
 
@@ -210,7 +257,7 @@ megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs)
  * megasas_clear_interrupt_xscale -	Check & clear interrupt
  * @regs:				MFI register set
  */
-static int 
+static int
 megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
 {
 	u32 status;
@@ -243,7 +290,7 @@ megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
  * @frame_count :		Number of frames for the command
  * @regs :			MFI register set
  */
-static inline void 
+static inline void
 megasas_fire_cmd_xscale(struct megasas_instance *instance,
 		dma_addr_t frame_phys_addr,
 		u32 frame_count,
@@ -323,15 +370,20 @@ static struct megasas_instance_template megasas_instance_template_xscale = {
 	.read_fw_status_reg = megasas_read_fw_status_reg_xscale,
 	.adp_reset = megasas_adp_reset_xscale,
 	.check_reset = megasas_check_reset_xscale,
+	.service_isr = megasas_isr,
+	.tasklet = megasas_complete_cmd_dpc,
+	.init_adapter = megasas_init_adapter_mfi,
+	.build_and_issue_cmd = megasas_build_and_issue_cmd,
+	.issue_dcmd = megasas_issue_dcmd,
 };
 
 /**
-*	This is the end of set of functions & definitions specific 
+*	This is the end of set of functions & definitions specific
 *	to xscale (deviceid : 1064R, PERC5) controllers
 */
 
 /**
-*	The following functions are defined for ppc (deviceid : 0x60) 
+*	The following functions are defined for ppc (deviceid : 0x60)
 * 	controllers
 */
 
@@ -343,7 +395,7 @@ static inline void
 megasas_enable_intr_ppc(struct megasas_register_set __iomem * regs)
 {
 	writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
-    
+
 	writel(~0x80000000, &(regs)->outbound_intr_mask);
 
 	/* Dummy readl to force pci flush */
@@ -377,7 +429,7 @@ megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs)
  * megasas_clear_interrupt_ppc -	Check & clear interrupt
  * @regs:				MFI register set
  */
-static int 
+static int
 megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
 {
 	u32 status;
@@ -406,7 +458,7 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
  * @frame_count :		Number of frames for the command
  * @regs :			MFI register set
  */
-static inline void 
+static inline void
 megasas_fire_cmd_ppc(struct megasas_instance *instance,
 		dma_addr_t frame_phys_addr,
 		u32 frame_count,
@@ -414,7 +466,7 @@ megasas_fire_cmd_ppc(struct megasas_instance *instance,
 {
 	unsigned long flags;
 	spin_lock_irqsave(&instance->hba_lock, flags);
-	writel((frame_phys_addr | (frame_count<<1))|1, 
+	writel((frame_phys_addr | (frame_count<<1))|1,
 			&(regs)->inbound_queue_port);
 	spin_unlock_irqrestore(&instance->hba_lock, flags);
 }
@@ -441,7 +493,7 @@ megasas_check_reset_ppc(struct megasas_instance *instance,
 	return 0;
 }
 static struct megasas_instance_template megasas_instance_template_ppc = {
-	
+
 	.fire_cmd = megasas_fire_cmd_ppc,
 	.enable_intr = megasas_enable_intr_ppc,
 	.disable_intr = megasas_disable_intr_ppc,
@@ -449,6 +501,11 @@ static struct megasas_instance_template megasas_instance_template_ppc = {
 	.read_fw_status_reg = megasas_read_fw_status_reg_ppc,
 	.adp_reset = megasas_adp_reset_ppc,
 	.check_reset = megasas_check_reset_ppc,
+	.service_isr = megasas_isr,
+	.tasklet = megasas_complete_cmd_dpc,
+	.init_adapter = megasas_init_adapter_mfi,
+	.build_and_issue_cmd = megasas_build_and_issue_cmd,
+	.issue_dcmd = megasas_issue_dcmd,
 };
 
 /**
@@ -570,6 +627,11 @@ static struct megasas_instance_template megasas_instance_template_skinny = {
 	.read_fw_status_reg = megasas_read_fw_status_reg_skinny,
 	.adp_reset = megasas_adp_reset_skinny,
 	.check_reset = megasas_check_reset_skinny,
+	.service_isr = megasas_isr,
+	.tasklet = megasas_complete_cmd_dpc,
+	.init_adapter = megasas_init_adapter_mfi,
+	.build_and_issue_cmd = megasas_build_and_issue_cmd,
+	.issue_dcmd = megasas_issue_dcmd,
 };
 
 
@@ -744,6 +806,11 @@ static struct megasas_instance_template megasas_instance_template_gen2 = {
 	.read_fw_status_reg = megasas_read_fw_status_reg_gen2,
 	.adp_reset = megasas_adp_reset_gen2,
 	.check_reset = megasas_check_reset_gen2,
+	.service_isr = megasas_isr,
+	.tasklet = megasas_complete_cmd_dpc,
+	.init_adapter = megasas_init_adapter_mfi,
+	.build_and_issue_cmd = megasas_build_and_issue_cmd,
+	.issue_dcmd = megasas_issue_dcmd,
 };
 
 /**
@@ -751,18 +818,21 @@ static struct megasas_instance_template megasas_instance_template_gen2 = {
 *       specific to gen2 (deviceid : 0x78, 0x79) controllers
 */
 
+/*
+ * Template added for TB (Fusion)
+ */
+extern struct megasas_instance_template megasas_instance_template_fusion;
+
 /**
  * megasas_issue_polled -	Issues a polling command
  * @instance:			Adapter soft state
- * @cmd:			Command packet to be issued 
+ * @cmd:			Command packet to be issued
  *
  * For polling, MFI requires the cmd_status to be set to 0xFF before posting.
  */
-static int
+int
 megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd)
 {
-	int i;
-	u32 msecs = MFI_POLL_TIMEOUT_SECS * 1000;
 
 	struct megasas_header *frame_hdr = &cmd->frame->hdr;
 
@@ -772,21 +842,12 @@ megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd)
 	/*
 	 * Issue the frame using inbound queue port
 	 */
-	instance->instancet->fire_cmd(instance,
-			cmd->frame_phys_addr, 0, instance->reg_set);
+	instance->instancet->issue_dcmd(instance, cmd);
 
 	/*
 	 * Wait for cmd_status to change
 	 */
-	for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i++) {
-		rmb();
-		msleep(1);
-	}
-
-	if (frame_hdr->cmd_status == 0xff)
-		return -ETIME;
-
-	return 0;
+	return wait_and_poll(instance, cmd);
 }
 
 /**
@@ -804,8 +865,7 @@ megasas_issue_blocked_cmd(struct megasas_instance *instance,
 {
 	cmd->cmd_status = ENODATA;
 
-	instance->instancet->fire_cmd(instance,
-			cmd->frame_phys_addr, 0, instance->reg_set);
+	instance->instancet->issue_dcmd(instance, cmd);
 
 	wait_event(instance->int_cmd_wait_q, cmd->cmd_status != ENODATA);
 
@@ -849,8 +909,7 @@ megasas_issue_blocked_abort_cmd(struct megasas_instance *instance,
 	cmd->sync_cmd = 1;
 	cmd->cmd_status = 0xFF;
 
-	instance->instancet->fire_cmd(instance,
-			cmd->frame_phys_addr, 0, instance->reg_set);
+	instance->instancet->issue_dcmd(instance, cmd);
 
 	/*
 	 * Wait for this cmd to complete
@@ -1242,11 +1301,11 @@ megasas_build_ldio(struct megasas_instance *instance, struct scsi_cmnd *scp,
 /**
  * megasas_is_ldio -		Checks if the cmd is for logical drive
  * @scmd:			SCSI command
- *	
+ *
  * Called by megasas_queue_command to find out if the command to be queued
- * is a logical drive command	
+ * is a logical drive command
  */
-static inline int megasas_is_ldio(struct scsi_cmnd *cmd)
+inline int megasas_is_ldio(struct scsi_cmnd *cmd)
 {
 	if (!MEGASAS_IS_LOGICAL(cmd))
 		return 0;
@@ -1328,16 +1387,59 @@ megasas_dump_pending_frames(struct megasas_instance *instance)
 	printk(KERN_ERR "megasas[%d]: Dumping Done.\n\n",instance->host->host_no);
 }
 
+u32
+megasas_build_and_issue_cmd(struct megasas_instance *instance,
+			    struct scsi_cmnd *scmd)
+{
+	struct megasas_cmd *cmd;
+	u32 frame_count;
+
+	cmd = megasas_get_cmd(instance);
+	if (!cmd)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
+	/*
+	 * Logical drive command
+	 */
+	if (megasas_is_ldio(scmd))
+		frame_count = megasas_build_ldio(instance, scmd, cmd);
+	else
+		frame_count = megasas_build_dcdb(instance, scmd, cmd);
+
+	if (!frame_count)
+		goto out_return_cmd;
+
+	cmd->scmd = scmd;
+	scmd->SCp.ptr = (char *)cmd;
+
+	/*
+	 * Issue the command to the FW
+	 */
+	atomic_inc(&instance->fw_outstanding);
+
+	instance->instancet->fire_cmd(instance, cmd->frame_phys_addr,
+				cmd->frame_count-1, instance->reg_set);
+	/*
+	 * Check if we have pend cmds to be completed
+	 */
+	if (poll_mode_io && atomic_read(&instance->fw_outstanding))
+		tasklet_schedule(&instance->isr_tasklet);
+
+	return 0;
+out_return_cmd:
+	megasas_return_cmd(instance, cmd);
+	return 1;
+}
+
+
 /**
  * megasas_queue_command -	Queue entry point
  * @scmd:			SCSI command to be queued
  * @done:			Callback entry point
  */
 static int
-megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
+megasas_queue_command_lck(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
 {
-	u32 frame_count;
-	struct megasas_cmd *cmd;
 	struct megasas_instance *instance;
 	unsigned long flags;
 
@@ -1376,47 +1478,20 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *))
 		break;
 	}
 
-	cmd = megasas_get_cmd(instance);
-	if (!cmd)
+	if (instance->instancet->build_and_issue_cmd(instance, scmd)) {
+		printk(KERN_ERR "megasas: Err returned from build_and_issue_cmd\n");
 		return SCSI_MLQUEUE_HOST_BUSY;
-
-	/*
-	 * Logical drive command
-	 */
-	if (megasas_is_ldio(scmd))
-		frame_count = megasas_build_ldio(instance, scmd, cmd);
-	else
-		frame_count = megasas_build_dcdb(instance, scmd, cmd);
-
-	if (!frame_count)
-		goto out_return_cmd;
-
-	cmd->scmd = scmd;
-	scmd->SCp.ptr = (char *)cmd;
-
-	/*
-	 * Issue the command to the FW
-	 */
-	atomic_inc(&instance->fw_outstanding);
-
-	instance->instancet->fire_cmd(instance, cmd->frame_phys_addr,
-				cmd->frame_count-1, instance->reg_set);
-	/*
-	 * Check if we have pend cmds to be completed
-	 */
-	if (poll_mode_io && atomic_read(&instance->fw_outstanding))
-		tasklet_schedule(&instance->isr_tasklet);
-
+	}
 
 	return 0;
 
- out_return_cmd:
-	megasas_return_cmd(instance, cmd);
  out_done:
 	done(scmd);
 	return 0;
 }
 
+static DEF_SCSI_QCMD(megasas_queue_command)
+
 static struct megasas_instance *megasas_lookup_instance(u16 host_no)
 {
 	int i;
@@ -1490,15 +1565,44 @@ static int megasas_slave_alloc(struct scsi_device *sdev)
 	return 0;
 }
 
-static void megaraid_sas_kill_hba(struct megasas_instance *instance)
+void megaraid_sas_kill_hba(struct megasas_instance *instance)
 {
 	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
-		writel(MFI_STOP_ADP,
-			&instance->reg_set->reserved_0[0]);
+	    (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+	    (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)) {
+		writel(MFI_STOP_ADP, &instance->reg_set->doorbell);
 	} else {
-		writel(MFI_STOP_ADP,
-			&instance->reg_set->inbound_doorbell);
+		writel(MFI_STOP_ADP, &instance->reg_set->inbound_doorbell);
+	}
+}
+
+ /**
+  * megasas_check_and_restore_queue_depth - Check if queue depth needs to be
+  *					restored to max value
+  * @instance:			Adapter soft state
+  *
+  */
+void
+megasas_check_and_restore_queue_depth(struct megasas_instance *instance)
+{
+	unsigned long flags;
+	if (instance->flag & MEGASAS_FW_BUSY
+		&& time_after(jiffies, instance->last_time + 5 * HZ)
+		&& atomic_read(&instance->fw_outstanding) < 17) {
+
+		spin_lock_irqsave(instance->host->host_lock, flags);
+		instance->flag &= ~MEGASAS_FW_BUSY;
+		if ((instance->pdev->device ==
+			PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+			(instance->pdev->device ==
+			PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+			instance->host->can_queue =
+				instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
+		} else
+			instance->host->can_queue =
+				instance->max_fw_cmds - MEGASAS_INT_CMDS;
+
+		spin_unlock_irqrestore(instance->host->host_lock, flags);
 	}
 }
 
@@ -1552,24 +1656,7 @@ static void megasas_complete_cmd_dpc(unsigned long instance_addr)
 	/*
 	 * Check if we can restore can_queue
 	 */
-	if (instance->flag & MEGASAS_FW_BUSY
-		&& time_after(jiffies, instance->last_time + 5 * HZ)
-		&& atomic_read(&instance->fw_outstanding) < 17) {
-
-		spin_lock_irqsave(instance->host->host_lock, flags);
-		instance->flag &= ~MEGASAS_FW_BUSY;
-		if ((instance->pdev->device ==
-			PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
-			(instance->pdev->device ==
-			PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
-			instance->host->can_queue =
-				instance->max_fw_cmds - MEGASAS_SKINNY_INT_CMDS;
-		} else
-			instance->host->can_queue =
-				instance->max_fw_cmds - MEGASAS_INT_CMDS;
-
-		spin_unlock_irqrestore(instance->host->host_lock, flags);
-	}
+	megasas_check_and_restore_queue_depth(instance);
 }
 
 static void
@@ -1747,7 +1834,7 @@ static int megasas_wait_for_outstanding(struct megasas_instance *instance)
 			(instance->pdev->device ==
 			PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
 			writel(MFI_STOP_ADP,
-				&instance->reg_set->reserved_0[0]);
+				&instance->reg_set->doorbell);
 		} else {
 			writel(MFI_STOP_ADP,
 				&instance->reg_set->inbound_doorbell);
@@ -1851,11 +1938,16 @@ static int megasas_reset_device(struct scsi_cmnd *scmd)
 static int megasas_reset_bus_host(struct scsi_cmnd *scmd)
 {
 	int ret;
+	struct megasas_instance *instance;
+	instance = (struct megasas_instance *)scmd->device->host->hostdata;
 
 	/*
 	 * First wait for all commands to complete
 	 */
-	ret = megasas_generic_reset(scmd);
+	if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)
+		ret = megasas_reset_fusion(scmd->device->host);
+	else
+		ret = megasas_generic_reset(scmd);
 
 	return ret;
 }
@@ -1998,8 +2090,8 @@ megasas_complete_int_cmd(struct megasas_instance *instance,
  * @instance:			Adapter soft state
  * @cmd:			Cmd that was issued to abort another cmd
  *
- * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q 
- * after it issues an abort on a previously issued command. This function 
+ * The megasas_issue_blocked_abort_cmd() function waits on abort_cmd_wait_q
+ * after it issues an abort on a previously issued command. This function
  * wakes up all functions waiting on the same wait queue.
  */
 static void
@@ -2019,19 +2111,20 @@ megasas_complete_abort(struct megasas_instance *instance,
  * megasas_complete_cmd -	Completes a command
  * @instance:			Adapter soft state
  * @cmd:			Command to be completed
- * @alt_status:			If non-zero, use this value as status to 
+ * @alt_status:			If non-zero, use this value as status to
  * 				SCSI mid-layer instead of the value returned
  * 				by the FW. This should be used if caller wants
  * 				an alternate status (as in the case of aborted
  * 				commands)
  */
-static void
+void
 megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
 		     u8 alt_status)
 {
 	int exception = 0;
 	struct megasas_header *hdr = &cmd->frame->hdr;
 	unsigned long flags;
+	struct fusion_context *fusion = instance->ctrl_context;
 
 	/* flag for the retry reset */
 	cmd->retry_for_fw_reset = 0;
@@ -2124,6 +2217,37 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
 	case MFI_CMD_SMP:
 	case MFI_CMD_STP:
 	case MFI_CMD_DCMD:
+		/* Check for LD map update */
+		if ((cmd->frame->dcmd.opcode == MR_DCMD_LD_MAP_GET_INFO) &&
+		    (cmd->frame->dcmd.mbox.b[1] == 1)) {
+			spin_lock_irqsave(instance->host->host_lock, flags);
+			if (cmd->frame->hdr.cmd_status != 0) {
+				if (cmd->frame->hdr.cmd_status !=
+				    MFI_STAT_NOT_FOUND)
+					printk(KERN_WARNING "megasas: map sync"
+					       "failed, status = 0x%x.\n",
+					       cmd->frame->hdr.cmd_status);
+				else {
+					megasas_return_cmd(instance, cmd);
+					spin_unlock_irqrestore(
+						instance->host->host_lock,
+						flags);
+					break;
+				}
+			} else
+				instance->map_id++;
+			megasas_return_cmd(instance, cmd);
+			if (MR_ValidateMapInfo(
+				    fusion->ld_map[(instance->map_id & 1)],
+				    fusion->load_balance_info))
+				fusion->fast_path_io = 1;
+			else
+				fusion->fast_path_io = 0;
+			megasas_sync_map_info(instance);
+			spin_unlock_irqrestore(instance->host->host_lock,
+					       flags);
+			break;
+		}
 		if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET_INFO ||
 			cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET) {
 			spin_lock_irqsave(&poll_aen_lock, flags);
@@ -2462,7 +2586,7 @@ static irqreturn_t megasas_isr(int irq, void *devp)
  * states, driver must take steps to bring it to ready state. Otherwise, it
  * has to wait for the ready state.
  */
-static int
+int
 megasas_transition_to_ready(struct megasas_instance* instance)
 {
 	int i;
@@ -2474,8 +2598,8 @@ megasas_transition_to_ready(struct megasas_instance* instance)
 	fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK;
 
 	if (fw_state != MFI_STATE_READY)
- 		printk(KERN_INFO "megasas: Waiting for FW to come to ready"
- 		       " state\n");
+		printk(KERN_INFO "megasas: Waiting for FW to come to ready"
+		       " state\n");
 
 	while (fw_state != MFI_STATE_READY) {
 
@@ -2496,11 +2620,12 @@ megasas_transition_to_ready(struct megasas_instance* instance)
 			if ((instance->pdev->device ==
 				PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
 				(instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
-
+				 PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+				(instance->pdev->device ==
+				 PCI_DEVICE_ID_LSI_FUSION)) {
 				writel(
 				  MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
-				  &instance->reg_set->reserved_0[0]);
+				  &instance->reg_set->doorbell);
 			} else {
 				writel(
 				    MFI_INIT_CLEAR_HANDSHAKE|MFI_INIT_HOTPLUG,
@@ -2513,11 +2638,13 @@ megasas_transition_to_ready(struct megasas_instance* instance)
 
 		case MFI_STATE_BOOT_MESSAGE_PENDING:
 			if ((instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
-			(instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+			     PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
+				(instance->pdev->device ==
+				 PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
+			    (instance->pdev->device ==
+			     PCI_DEVICE_ID_LSI_FUSION)) {
 				writel(MFI_INIT_HOTPLUG,
-				&instance->reg_set->reserved_0[0]);
+				       &instance->reg_set->doorbell);
 			} else
 				writel(MFI_INIT_HOTPLUG,
 					&instance->reg_set->inbound_doorbell);
@@ -2534,9 +2661,23 @@ megasas_transition_to_ready(struct megasas_instance* instance)
 			if ((instance->pdev->device ==
 				PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
 				(instance->pdev->device ==
-				PCI_DEVICE_ID_LSI_SAS0071SKINNY)) {
+				PCI_DEVICE_ID_LSI_SAS0071SKINNY)  ||
+				(instance->pdev->device
+					== PCI_DEVICE_ID_LSI_FUSION)) {
 				writel(MFI_RESET_FLAGS,
-					&instance->reg_set->reserved_0[0]);
+					&instance->reg_set->doorbell);
+				if (instance->pdev->device ==
+				    PCI_DEVICE_ID_LSI_FUSION) {
+					for (i = 0; i < (10 * 1000); i += 20) {
+						if (readl(
+							    &instance->
+							    reg_set->
+							    doorbell) & 1)
+							msleep(20);
+						else
+							break;
+					}
+				}
 			} else
 				writel(MFI_RESET_FLAGS,
 					&instance->reg_set->inbound_doorbell);
@@ -2588,7 +2729,7 @@ megasas_transition_to_ready(struct megasas_instance* instance)
 		 * The cur_state should not last for more than max_wait secs
 		 */
 		for (i = 0; i < (max_wait * 1000); i++) {
-			fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &  
+			fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) &
 					MFI_STATE_MASK ;
 		curr_abs_state =
 		instance->instancet->read_fw_status_reg(instance->reg_set);
@@ -2608,7 +2749,7 @@ megasas_transition_to_ready(struct megasas_instance* instance)
 			return -ENODEV;
 		}
 	}
- 	printk(KERN_INFO "megasas: FW now in Ready state\n");
+	printk(KERN_INFO "megasas: FW now in Ready state\n");
 
 	return 0;
 }
@@ -2620,7 +2761,7 @@ megasas_transition_to_ready(struct megasas_instance* instance)
 static void megasas_teardown_frame_pool(struct megasas_instance *instance)
 {
 	int i;
-	u32 max_cmd = instance->max_fw_cmds;
+	u32 max_cmd = instance->max_mfi_cmds;
 	struct megasas_cmd *cmd;
 
 	if (!instance->frame_dma_pool)
@@ -2671,7 +2812,7 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
 	u32 frame_count;
 	struct megasas_cmd *cmd;
 
-	max_cmd = instance->max_fw_cmds;
+	max_cmd = instance->max_mfi_cmds;
 
 	/*
 	 * Size of our frame is 64 bytes for MFI frame, followed by max SG
@@ -2758,14 +2899,15 @@ static int megasas_create_frame_pool(struct megasas_instance *instance)
  * megasas_free_cmds -	Free all the cmds in the free cmd pool
  * @instance:		Adapter soft state
  */
-static void megasas_free_cmds(struct megasas_instance *instance)
+void megasas_free_cmds(struct megasas_instance *instance)
 {
 	int i;
 	/* First free the MFI frame pool */
 	megasas_teardown_frame_pool(instance);
 
 	/* Free all the commands in the cmd_list */
-	for (i = 0; i < instance->max_fw_cmds; i++)
+	for (i = 0; i < instance->max_mfi_cmds; i++)
+
 		kfree(instance->cmd_list[i]);
 
 	/* Free the cmd_list buffer itself */
@@ -2793,14 +2935,14 @@ static void megasas_free_cmds(struct megasas_instance *instance)
  * This array is used only to look up the megasas_cmd given the context. The
  * free commands themselves are maintained in a linked list called cmd_pool.
  */
-static int megasas_alloc_cmds(struct megasas_instance *instance)
+int megasas_alloc_cmds(struct megasas_instance *instance)
 {
 	int i;
 	int j;
 	u32 max_cmd;
 	struct megasas_cmd *cmd;
 
-	max_cmd = instance->max_fw_cmds;
+	max_cmd = instance->max_mfi_cmds;
 
 	/*
 	 * instance->cmd_list is an array of struct megasas_cmd pointers.
@@ -2814,6 +2956,7 @@ static int megasas_alloc_cmds(struct megasas_instance *instance)
 		return -ENOMEM;
 	}
 
+	memset(instance->cmd_list, 0, sizeof(struct megasas_cmd *) *max_cmd);
 
 	for (i = 0; i < max_cmd; i++) {
 		instance->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd),
@@ -3208,76 +3351,15 @@ megasas_io_completion_timer(unsigned long instance_addr)
 			jiffies + MEGASAS_COMPLETION_TIMER_INTERVAL);
 }
 
-/**
- * megasas_init_mfi -	Initializes the FW
- * @instance:		Adapter soft state
- *
- * This is the main function for initializing MFI firmware.
- */
-static int megasas_init_mfi(struct megasas_instance *instance)
+static u32
+megasas_init_adapter_mfi(struct megasas_instance *instance)
 {
+	struct megasas_register_set __iomem *reg_set;
 	u32 context_sz;
 	u32 reply_q_sz;
-	u32 max_sectors_1;
-	u32 max_sectors_2;
-	u32 tmp_sectors;
-	struct megasas_register_set __iomem *reg_set;
-	struct megasas_ctrl_info *ctrl_info;
-	/*
-	 * Map the message registers
-	 */
-	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0071SKINNY) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0073SKINNY) ||
-		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
-		instance->base_addr = pci_resource_start(instance->pdev, 1);
-	} else {
-		instance->base_addr = pci_resource_start(instance->pdev, 0);
-	}
-
-	if (pci_request_selected_regions(instance->pdev,
-		pci_select_bars(instance->pdev, IORESOURCE_MEM),
-		"megasas: LSI")) {
-		printk(KERN_DEBUG "megasas: IO memory region busy!\n");
-		return -EBUSY;
-	}
-
-	instance->reg_set = ioremap_nocache(instance->base_addr, 8192);
-
-	if (!instance->reg_set) {
-		printk(KERN_DEBUG "megasas: Failed to map IO mem\n");
-		goto fail_ioremap;
-	}
 
 	reg_set = instance->reg_set;
 
-	switch(instance->pdev->device)
-	{
-		case PCI_DEVICE_ID_LSI_SAS1078R:
-		case PCI_DEVICE_ID_LSI_SAS1078DE:
-			instance->instancet = &megasas_instance_template_ppc;
-			break;
-		case PCI_DEVICE_ID_LSI_SAS1078GEN2:
-		case PCI_DEVICE_ID_LSI_SAS0079GEN2:
-			instance->instancet = &megasas_instance_template_gen2;
-			break;
-		case PCI_DEVICE_ID_LSI_SAS0073SKINNY:
-		case PCI_DEVICE_ID_LSI_SAS0071SKINNY:
-			instance->instancet = &megasas_instance_template_skinny;
-			break;
-		case PCI_DEVICE_ID_LSI_SAS1064R:
-		case PCI_DEVICE_ID_DELL_PERC5:
-		default:
-			instance->instancet = &megasas_instance_template_xscale;
-			break;
-	}
-
-	/*
-	 * We expect the FW state to be READY
-	 */
-	if (megasas_transition_to_ready(instance))
-		goto fail_ready_state;
-
 	/*
 	 * Get various operational parameters from status register
 	 */
@@ -3288,7 +3370,8 @@ static int megasas_init_mfi(struct megasas_instance *instance)
 	 * does not exceed max cmds that the FW can support
 	 */
 	instance->max_fw_cmds = instance->max_fw_cmds-1;
-	instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >> 
+	instance->max_mfi_cmds = instance->max_fw_cmds;
+	instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >>
 					0x10;
 	/*
 	 * Create a pool of commands
@@ -3331,6 +3414,90 @@ static int megasas_init_mfi(struct megasas_instance *instance)
 	if (instance->fw_support_ieee)
 		instance->flag_ieee = 1;
 
+	return 0;
+
+fail_fw_init:
+
+	pci_free_consistent(instance->pdev, reply_q_sz,
+			    instance->reply_queue, instance->reply_queue_h);
+fail_reply_queue:
+	megasas_free_cmds(instance);
+
+fail_alloc_cmds:
+	iounmap(instance->reg_set);
+	return 1;
+}
+
+/**
+ * megasas_init_fw -	Initializes the FW
+ * @instance:		Adapter soft state
+ *
+ * This is the main function for initializing firmware
+ */
+
+static int megasas_init_fw(struct megasas_instance *instance)
+{
+	u32 max_sectors_1;
+	u32 max_sectors_2;
+	u32 tmp_sectors;
+	struct megasas_register_set __iomem *reg_set;
+	struct megasas_ctrl_info *ctrl_info;
+	unsigned long bar_list;
+
+	/* Find first memory bar */
+	bar_list = pci_select_bars(instance->pdev, IORESOURCE_MEM);
+	instance->bar = find_first_bit(&bar_list, sizeof(unsigned long));
+	instance->base_addr = pci_resource_start(instance->pdev, instance->bar);
+	if (pci_request_selected_regions(instance->pdev, instance->bar,
+					 "megasas: LSI")) {
+		printk(KERN_DEBUG "megasas: IO memory region busy!\n");
+		return -EBUSY;
+	}
+
+	instance->reg_set = ioremap_nocache(instance->base_addr, 8192);
+
+	if (!instance->reg_set) {
+		printk(KERN_DEBUG "megasas: Failed to map IO mem\n");
+		goto fail_ioremap;
+	}
+
+	reg_set = instance->reg_set;
+
+	switch (instance->pdev->device) {
+	case PCI_DEVICE_ID_LSI_FUSION:
+		instance->instancet = &megasas_instance_template_fusion;
+		break;
+	case PCI_DEVICE_ID_LSI_SAS1078R:
+	case PCI_DEVICE_ID_LSI_SAS1078DE:
+		instance->instancet = &megasas_instance_template_ppc;
+		break;
+	case PCI_DEVICE_ID_LSI_SAS1078GEN2:
+	case PCI_DEVICE_ID_LSI_SAS0079GEN2:
+		instance->instancet = &megasas_instance_template_gen2;
+		break;
+	case PCI_DEVICE_ID_LSI_SAS0073SKINNY:
+	case PCI_DEVICE_ID_LSI_SAS0071SKINNY:
+		instance->instancet = &megasas_instance_template_skinny;
+		break;
+	case PCI_DEVICE_ID_LSI_SAS1064R:
+	case PCI_DEVICE_ID_DELL_PERC5:
+	default:
+		instance->instancet = &megasas_instance_template_xscale;
+		break;
+	}
+
+	/*
+	 * We expect the FW state to be READY
+	 */
+	if (megasas_transition_to_ready(instance))
+		goto fail_ready_state;
+
+	/* Get operational params, sge flags, send init cmd to controller */
+	if (instance->instancet->init_adapter(instance))
+		return -ENODEV;
+
+	printk(KERN_ERR "megasas: INIT adapter done\n");
+
 	/** for passthrough
 	* the following function will get the PD LIST.
 	*/
@@ -3386,20 +3553,11 @@ static int megasas_init_mfi(struct megasas_instance *instance)
 				MEGASAS_COMPLETION_TIMER_INTERVAL);
 	return 0;
 
-      fail_fw_init:
-
-	pci_free_consistent(instance->pdev, reply_q_sz,
-			    instance->reply_queue, instance->reply_queue_h);
-      fail_reply_queue:
-	megasas_free_cmds(instance);
-
-      fail_alloc_cmds:
-      fail_ready_state:
+fail_ready_state:
 	iounmap(instance->reg_set);
 
       fail_ioremap:
-	pci_release_selected_regions(instance->pdev,
-		pci_select_bars(instance->pdev, IORESOURCE_MEM));
+	pci_release_selected_regions(instance->pdev, instance->bar);
 
 	return -EINVAL;
 }
@@ -3410,17 +3568,17 @@ static int megasas_init_mfi(struct megasas_instance *instance)
  */
 static void megasas_release_mfi(struct megasas_instance *instance)
 {
-	u32 reply_q_sz = sizeof(u32) * (instance->max_fw_cmds + 1);
+	u32 reply_q_sz = sizeof(u32) *(instance->max_mfi_cmds + 1);
 
-	pci_free_consistent(instance->pdev, reply_q_sz,
+	if (instance->reply_queue)
+		pci_free_consistent(instance->pdev, reply_q_sz,
 			    instance->reply_queue, instance->reply_queue_h);
 
 	megasas_free_cmds(instance);
 
 	iounmap(instance->reg_set);
 
-	pci_release_selected_regions(instance->pdev,
-		pci_select_bars(instance->pdev, IORESOURCE_MEM));
+	pci_release_selected_regions(instance->pdev, instance->bar);
 }
 
 /**
@@ -3607,8 +3765,7 @@ megasas_register_aen(struct megasas_instance *instance, u32 seq_num,
 	/*
 	 * Issue the aen registration frame
 	 */
-	instance->instancet->fire_cmd(instance,
-			cmd->frame_phys_addr, 0, instance->reg_set);
+	instance->instancet->issue_dcmd(instance, cmd);
 
 	return 0;
 }
@@ -3685,12 +3842,18 @@ static int megasas_io_attach(struct megasas_instance *instance)
 	}
 
 	host->max_sectors = instance->max_sectors_per_req;
-	host->cmd_per_lun = 128;
+	host->cmd_per_lun = MEGASAS_DEFAULT_CMD_PER_LUN;
 	host->max_channel = MEGASAS_MAX_CHANNELS - 1;
 	host->max_id = MEGASAS_MAX_DEV_PER_CHANNEL;
 	host->max_lun = MEGASAS_MAX_LUN;
 	host->max_cmd_len = 16;
 
+	/* Fusion only supports host reset */
+	if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION) {
+		host->hostt->eh_device_reset_handler = NULL;
+		host->hostt->eh_bus_reset_handler = NULL;
+	}
+
 	/*
 	 * Notify the mid-layer about the new controller
 	 */
@@ -3731,7 +3894,7 @@ fail_set_dma_mask:
 /**
  * megasas_probe_one -	PCI hotplug entry point
  * @pdev:		PCI device structure
- * @id:			PCI ids of supported hotplugged adapter	
+ * @id:			PCI ids of supported hotplugged adapter
  */
 static int __devinit
 megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -3775,20 +3938,45 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	instance = (struct megasas_instance *)host->hostdata;
 	memset(instance, 0, sizeof(*instance));
 	atomic_set( &instance->fw_reset_no_pci_access, 0 );
+	instance->pdev = pdev;
 
-	instance->producer = pci_alloc_consistent(pdev, sizeof(u32),
-						  &instance->producer_h);
-	instance->consumer = pci_alloc_consistent(pdev, sizeof(u32),
-						  &instance->consumer_h);
+	switch (instance->pdev->device) {
+	case PCI_DEVICE_ID_LSI_FUSION:
+	{
+		struct fusion_context *fusion;
+
+		instance->ctrl_context =
+			kzalloc(sizeof(struct fusion_context), GFP_KERNEL);
+		if (!instance->ctrl_context) {
+			printk(KERN_DEBUG "megasas: Failed to allocate "
+			       "memory for Fusion context info\n");
+			goto fail_alloc_dma_buf;
+		}
+		fusion = instance->ctrl_context;
+		INIT_LIST_HEAD(&fusion->cmd_pool);
+		spin_lock_init(&fusion->cmd_pool_lock);
+	}
+	break;
+	default: /* For all other supported controllers */
+
+		instance->producer =
+			pci_alloc_consistent(pdev, sizeof(u32),
+					     &instance->producer_h);
+		instance->consumer =
+			pci_alloc_consistent(pdev, sizeof(u32),
+					     &instance->consumer_h);
+
+		if (!instance->producer || !instance->consumer) {
+			printk(KERN_DEBUG "megasas: Failed to allocate"
+			       "memory for producer, consumer\n");
+			goto fail_alloc_dma_buf;
+		}
 
-	if (!instance->producer || !instance->consumer) {
-		printk(KERN_DEBUG "megasas: Failed to allocate memory for "
-		       "producer, consumer\n");
-		goto fail_alloc_dma_buf;
+		*instance->producer = 0;
+		*instance->consumer = 0;
+		break;
 	}
 
-	*instance->producer = 0;
-	*instance->consumer = 0;
 	megasas_poll_wait_aen = 0;
 	instance->flag_ieee = 0;
 	instance->ev = NULL;
@@ -3824,11 +4012,11 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	spin_lock_init(&poll_aen_lock);
 
 	mutex_init(&instance->aen_mutex);
+	mutex_init(&instance->reset_mutex);
 
 	/*
 	 * Initialize PCI related and misc parameters
 	 */
-	instance->pdev = pdev;
 	instance->host = host;
 	instance->unique_id = pdev->bus->number << 8 | pdev->devfn;
 	instance->init_id = MEGASAS_DEFAULT_INIT_ID;
@@ -3846,18 +4034,31 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	instance->last_time = 0;
 	instance->disableOnlineCtrlReset = 1;
 
-	INIT_WORK(&instance->work_init, process_fw_state_change_wq);
+	if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)
+		INIT_WORK(&instance->work_init, megasas_fusion_ocr_wq);
+	else
+		INIT_WORK(&instance->work_init, process_fw_state_change_wq);
 
 	/*
 	 * Initialize MFI Firmware
 	 */
-	if (megasas_init_mfi(instance))
+	if (megasas_init_fw(instance))
 		goto fail_init_mfi;
 
+	/* Try to enable MSI-X */
+	if ((instance->pdev->device != PCI_DEVICE_ID_LSI_SAS1078R) &&
+	    (instance->pdev->device != PCI_DEVICE_ID_LSI_SAS1078DE) &&
+	    (instance->pdev->device != PCI_DEVICE_ID_LSI_VERDE_ZCR) &&
+	    !msix_disable && !pci_enable_msix(instance->pdev,
+					      &instance->msixentry, 1))
+		instance->msi_flag = 1;
+
 	/*
 	 * Register IRQ
 	 */
-	if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED, "megasas", instance)) {
+	if (request_irq(instance->msi_flag ? instance->msixentry.vector :
+			pdev->irq, instance->instancet->service_isr,
+			IRQF_SHARED, "megasas", instance)) {
 		printk(KERN_DEBUG "megasas: Failed to register IRQ\n");
 		goto fail_irq;
 	}
@@ -3902,9 +4103,10 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	pci_set_drvdata(pdev, NULL);
 	instance->instancet->disable_intr(instance->reg_set);
-	free_irq(instance->pdev->irq, instance);
-
-	megasas_release_mfi(instance);
+	free_irq(instance->msi_flag ? instance->msixentry.vector :
+		 instance->pdev->irq, instance);
+	if (instance->msi_flag)
+		pci_disable_msix(instance->pdev);
 
       fail_irq:
       fail_init_mfi:
@@ -3914,9 +4116,13 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 				    instance->evt_detail,
 				    instance->evt_detail_h);
 
-	if (instance->producer)
+	if (instance->producer) {
 		pci_free_consistent(pdev, sizeof(u32), instance->producer,
 				    instance->producer_h);
+		megasas_release_mfi(instance);
+	} else {
+		megasas_release_fusion(instance);
+	}
 	if (instance->consumer)
 		pci_free_consistent(pdev, sizeof(u32), instance->consumer,
 				    instance->consumer_h);
@@ -3988,7 +4194,9 @@ static void megasas_shutdown_controller(struct megasas_instance *instance,
 
 	if (instance->aen_cmd)
 		megasas_issue_blocked_abort_cmd(instance, instance->aen_cmd);
-
+	if (instance->map_update_cmd)
+		megasas_issue_blocked_abort_cmd(instance,
+						instance->map_update_cmd);
 	dcmd = &cmd->frame->dcmd;
 
 	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
@@ -4044,7 +4252,10 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state)
 
 	pci_set_drvdata(instance->pdev, instance);
 	instance->instancet->disable_intr(instance->reg_set);
-	free_irq(instance->pdev->irq, instance);
+	free_irq(instance->msi_flag ? instance->msixentry.vector :
+		 instance->pdev->irq, instance);
+	if (instance->msi_flag)
+		pci_disable_msix(instance->pdev);
 
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
@@ -4090,9 +4301,6 @@ megasas_resume(struct pci_dev *pdev)
 	 * Initialize MFI Firmware
 	 */
 
-	*instance->producer = 0;
-	*instance->consumer = 0;
-
 	atomic_set(&instance->fw_outstanding, 0);
 
 	/*
@@ -4101,17 +4309,40 @@ megasas_resume(struct pci_dev *pdev)
 	if (megasas_transition_to_ready(instance))
 		goto fail_ready_state;
 
-	if (megasas_issue_init_mfi(instance))
-		goto fail_init_mfi;
+	switch (instance->pdev->device) {
+	case PCI_DEVICE_ID_LSI_FUSION:
+	{
+		megasas_reset_reply_desc(instance);
+		if (megasas_ioc_init_fusion(instance)) {
+			megasas_free_cmds(instance);
+			megasas_free_cmds_fusion(instance);
+			goto fail_init_mfi;
+		}
+		if (!megasas_get_map_info(instance))
+			megasas_sync_map_info(instance);
+	}
+	break;
+	default:
+		*instance->producer = 0;
+		*instance->consumer = 0;
+		if (megasas_issue_init_mfi(instance))
+			goto fail_init_mfi;
+		break;
+	}
 
-	tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
-			(unsigned long)instance);
+	tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
+		     (unsigned long)instance);
+
+	/* Now re-enable MSI-X */
+	if (instance->msi_flag)
+		pci_enable_msix(instance->pdev, &instance->msixentry, 1);
 
 	/*
 	 * Register IRQ
 	 */
-	if (request_irq(pdev->irq, megasas_isr, IRQF_SHARED,
-		"megasas", instance)) {
+	if (request_irq(instance->msi_flag ? instance->msixentry.vector :
+			pdev->irq, instance->instancet->service_isr,
+			IRQF_SHARED, "megasas", instance)) {
 		printk(KERN_ERR "megasas: Failed to register IRQ\n");
 		goto fail_irq;
 	}
@@ -4169,10 +4400,12 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev)
 	int i;
 	struct Scsi_Host *host;
 	struct megasas_instance *instance;
+	struct fusion_context *fusion;
 
 	instance = pci_get_drvdata(pdev);
 	instance->unload = 1;
 	host = instance->host;
+	fusion = instance->ctrl_context;
 
 	if (poll_mode_io)
 		del_timer_sync(&instance->io_completion_timer);
@@ -4209,18 +4442,37 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev)
 
 	instance->instancet->disable_intr(instance->reg_set);
 
-	free_irq(instance->pdev->irq, instance);
-
-	megasas_release_mfi(instance);
-
-	pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
-			    instance->evt_detail, instance->evt_detail_h);
-
-	pci_free_consistent(pdev, sizeof(u32), instance->producer,
-			    instance->producer_h);
-
-	pci_free_consistent(pdev, sizeof(u32), instance->consumer,
-			    instance->consumer_h);
+	free_irq(instance->msi_flag ? instance->msixentry.vector :
+		 instance->pdev->irq, instance);
+	if (instance->msi_flag)
+		pci_disable_msix(instance->pdev);
+
+	switch (instance->pdev->device) {
+	case PCI_DEVICE_ID_LSI_FUSION:
+		megasas_release_fusion(instance);
+		for (i = 0; i < 2 ; i++)
+			if (fusion->ld_map[i])
+				dma_free_coherent(&instance->pdev->dev,
+						  fusion->map_sz,
+						  fusion->ld_map[i],
+						  fusion->
+						  ld_map_phys[i]);
+		kfree(instance->ctrl_context);
+		break;
+	default:
+		megasas_release_mfi(instance);
+		pci_free_consistent(pdev,
+				    sizeof(struct megasas_evt_detail),
+				    instance->evt_detail,
+				    instance->evt_detail_h);
+		pci_free_consistent(pdev, sizeof(u32),
+				    instance->producer,
+				    instance->producer_h);
+		pci_free_consistent(pdev, sizeof(u32),
+				    instance->consumer,
+				    instance->consumer_h);
+		break;
+	}
 
 	scsi_host_put(host);
 
@@ -4984,6 +5236,7 @@ megasas_aen_polling(struct work_struct *work)
 			break;
 		case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED:
 		case MR_EVT_FOREIGN_CFG_IMPORTED:
+		case MR_EVT_LD_STATE_CHANGE:
 			doscan = 1;
 			break;
 		default:
@@ -5163,7 +5416,7 @@ err_dcf_attr_ver:
 	pci_unregister_driver(&megasas_pci_driver);
 err_pcidrv:
 	unregister_chrdev(megasas_mgmt_majorno, "megaraid_sas_ioctl");
-  	return rval;
+	return rval;
 }
 
 /**
diff --git a/drivers/scsi/megaraid/megaraid_sas_fp.c b/drivers/scsi/megaraid/megaraid_sas_fp.c
new file mode 100644
index 00000000000..53fa96ae2b3
--- /dev/null
+++ b/drivers/scsi/megaraid/megaraid_sas_fp.c
@@ -0,0 +1,516 @@
+/*
+ *  Linux MegaRAID driver for SAS based RAID controllers
+ *
+ *  Copyright (c) 2009-2011  LSI Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *  FILE: megaraid_sas_fp.c
+ *
+ *  Authors: LSI Corporation
+ *           Sumant Patro
+ *           Varad Talamacki
+ *           Manoj Jose
+ *
+ *  Send feedback to: <megaraidlinux@lsi.com>
+ *
+ *  Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
+ *     ATTN: Linuxraid
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <linux/uio.h>
+#include <linux/uaccess.h>
+#include <linux/fs.h>
+#include <linux/compat.h>
+#include <linux/blkdev.h>
+#include <linux/poll.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#include "megaraid_sas_fusion.h"
+#include <asm/div64.h>
+
+#define ABS_DIFF(a, b)   (((a) > (b)) ? ((a) - (b)) : ((b) - (a)))
+#define MR_LD_STATE_OPTIMAL 3
+#define FALSE 0
+#define TRUE 1
+
+/* Prototypes */
+void
+mr_update_load_balance_params(struct MR_FW_RAID_MAP_ALL *map,
+			      struct LD_LOAD_BALANCE_INFO *lbInfo);
+
+u32 mega_mod64(u64 dividend, u32 divisor)
+{
+	u64 d;
+	u32 remainder;
+
+	if (!divisor)
+		printk(KERN_ERR "megasas : DIVISOR is zero, in div fn\n");
+	d = dividend;
+	remainder = do_div(d, divisor);
+	return remainder;
+}
+
+/**
+ * @param dividend    : Dividend
+ * @param divisor    : Divisor
+ *
+ * @return quotient
+ **/
+u64 mega_div64_32(uint64_t dividend, uint32_t divisor)
+{
+	u32 remainder;
+	u64 d;
+
+	if (!divisor)
+		printk(KERN_ERR "megasas : DIVISOR is zero in mod fn\n");
+
+	d = dividend;
+	remainder = do_div(d, divisor);
+
+	return d;
+}
+
+struct MR_LD_RAID *MR_LdRaidGet(u32 ld, struct MR_FW_RAID_MAP_ALL *map)
+{
+	return &map->raidMap.ldSpanMap[ld].ldRaid;
+}
+
+static struct MR_SPAN_BLOCK_INFO *MR_LdSpanInfoGet(u32 ld,
+						   struct MR_FW_RAID_MAP_ALL
+						   *map)
+{
+	return &map->raidMap.ldSpanMap[ld].spanBlock[0];
+}
+
+static u8 MR_LdDataArmGet(u32 ld, u32 armIdx, struct MR_FW_RAID_MAP_ALL *map)
+{
+	return map->raidMap.ldSpanMap[ld].dataArmMap[armIdx];
+}
+
+static u16 MR_ArPdGet(u32 ar, u32 arm, struct MR_FW_RAID_MAP_ALL *map)
+{
+	return map->raidMap.arMapInfo[ar].pd[arm];
+}
+
+static u16 MR_LdSpanArrayGet(u32 ld, u32 span, struct MR_FW_RAID_MAP_ALL *map)
+{
+	return map->raidMap.ldSpanMap[ld].spanBlock[span].span.arrayRef;
+}
+
+static u16 MR_PdDevHandleGet(u32 pd, struct MR_FW_RAID_MAP_ALL *map)
+{
+	return map->raidMap.devHndlInfo[pd].curDevHdl;
+}
+
+u16 MR_GetLDTgtId(u32 ld, struct MR_FW_RAID_MAP_ALL *map)
+{
+	return map->raidMap.ldSpanMap[ld].ldRaid.targetId;
+}
+
+u16 MR_TargetIdToLdGet(u32 ldTgtId, struct MR_FW_RAID_MAP_ALL *map)
+{
+	return map->raidMap.ldTgtIdToLd[ldTgtId];
+}
+
+static struct MR_LD_SPAN *MR_LdSpanPtrGet(u32 ld, u32 span,
+					  struct MR_FW_RAID_MAP_ALL *map)
+{
+	return &map->raidMap.ldSpanMap[ld].spanBlock[span].span;
+}
+
+/*
+ * This function will validate Map info data provided by FW
+ */
+u8 MR_ValidateMapInfo(struct MR_FW_RAID_MAP_ALL *map,
+		      struct LD_LOAD_BALANCE_INFO *lbInfo)
+{
+	struct MR_FW_RAID_MAP *pFwRaidMap = &map->raidMap;
+
+	if (pFwRaidMap->totalSize !=
+	    (sizeof(struct MR_FW_RAID_MAP) -sizeof(struct MR_LD_SPAN_MAP) +
+	     (sizeof(struct MR_LD_SPAN_MAP) *pFwRaidMap->ldCount))) {
+		printk(KERN_ERR "megasas: map info structure size 0x%x is not matching with ld count\n",
+		       (unsigned int)((sizeof(struct MR_FW_RAID_MAP) -
+				       sizeof(struct MR_LD_SPAN_MAP)) +
+				      (sizeof(struct MR_LD_SPAN_MAP) *
+				       pFwRaidMap->ldCount)));
+		printk(KERN_ERR "megasas: span map %x, pFwRaidMap->totalSize "
+		       ": %x\n", (unsigned int)sizeof(struct MR_LD_SPAN_MAP),
+		       pFwRaidMap->totalSize);
+		return 0;
+	}
+
+	mr_update_load_balance_params(map, lbInfo);
+
+	return 1;
+}
+
+u32 MR_GetSpanBlock(u32 ld, u64 row, u64 *span_blk,
+		    struct MR_FW_RAID_MAP_ALL *map, int *div_error)
+{
+	struct MR_SPAN_BLOCK_INFO *pSpanBlock = MR_LdSpanInfoGet(ld, map);
+	struct MR_QUAD_ELEMENT    *quad;
+	struct MR_LD_RAID         *raid = MR_LdRaidGet(ld, map);
+	u32                span, j;
+
+	for (span = 0; span < raid->spanDepth; span++, pSpanBlock++) {
+
+		for (j = 0; j < pSpanBlock->block_span_info.noElements; j++) {
+			quad = &pSpanBlock->block_span_info.quad[j];
+
+			if (quad->diff == 0) {
+				*div_error = 1;
+				return span;
+			}
+			if (quad->logStart <= row  &&  row <= quad->logEnd  &&
+			    (mega_mod64(row-quad->logStart, quad->diff)) == 0) {
+				if (span_blk != NULL) {
+					u64  blk, debugBlk;
+					blk =
+						mega_div64_32(
+							(row-quad->logStart),
+							quad->diff);
+					debugBlk = blk;
+
+					blk = (blk + quad->offsetInSpan) <<
+						raid->stripeShift;
+					*span_blk = blk;
+				}
+				return span;
+			}
+		}
+	}
+	return span;
+}
+
+/*
+******************************************************************************
+*
+* This routine calculates the arm, span and block for the specified stripe and
+* reference in stripe.
+*
+* Inputs :
+*
+*    ld   - Logical drive number
+*    stripRow        - Stripe number
+*    stripRef    - Reference in stripe
+*
+* Outputs :
+*
+*    span          - Span number
+*    block         - Absolute Block number in the physical disk
+*/
+u8 MR_GetPhyParams(u32 ld, u64 stripRow, u16 stripRef, u64 *pdBlock,
+		   u16 *pDevHandle, struct RAID_CONTEXT *pRAID_Context,
+		   struct MR_FW_RAID_MAP_ALL *map)
+{
+	struct MR_LD_RAID  *raid = MR_LdRaidGet(ld, map);
+	u32         pd, arRef;
+	u8          physArm, span;
+	u64         row;
+	u8	    retval = TRUE;
+	int	    error_code = 0;
+
+	row =  mega_div64_32(stripRow, raid->rowDataSize);
+
+	if (raid->level == 6) {
+		/* logical arm within row */
+		u32 logArm =  mega_mod64(stripRow, raid->rowDataSize);
+		u32 rowMod, armQ, arm;
+
+		if (raid->rowSize == 0)
+			return FALSE;
+		/* get logical row mod */
+		rowMod = mega_mod64(row, raid->rowSize);
+		armQ = raid->rowSize-1-rowMod; /* index of Q drive */
+		arm = armQ+1+logArm; /* data always logically follows Q */
+		if (arm >= raid->rowSize) /* handle wrap condition */
+			arm -= raid->rowSize;
+		physArm = (u8)arm;
+	} else  {
+		if (raid->modFactor == 0)
+			return FALSE;
+		physArm = MR_LdDataArmGet(ld,  mega_mod64(stripRow,
+							  raid->modFactor),
+					  map);
+	}
+
+	if (raid->spanDepth == 1) {
+		span = 0;
+		*pdBlock = row << raid->stripeShift;
+	} else {
+		span = (u8)MR_GetSpanBlock(ld, row, pdBlock, map, &error_code);
+		if (error_code == 1)
+			return FALSE;
+	}
+
+	/* Get the array on which this span is present */
+	arRef       = MR_LdSpanArrayGet(ld, span, map);
+	pd          = MR_ArPdGet(arRef, physArm, map); /* Get the pd */
+
+	if (pd != MR_PD_INVALID)
+		/* Get dev handle from Pd. */
+		*pDevHandle = MR_PdDevHandleGet(pd, map);
+	else {
+		*pDevHandle = MR_PD_INVALID; /* set dev handle as invalid. */
+		if (raid->level >= 5)
+			pRAID_Context->regLockFlags = REGION_TYPE_EXCLUSIVE;
+		else if (raid->level == 1) {
+			/* Get alternate Pd. */
+			pd = MR_ArPdGet(arRef, physArm + 1, map);
+			if (pd != MR_PD_INVALID)
+				/* Get dev handle from Pd */
+				*pDevHandle = MR_PdDevHandleGet(pd, map);
+		}
+		retval = FALSE;
+	}
+
+	*pdBlock += stripRef + MR_LdSpanPtrGet(ld, span, map)->startBlk;
+	pRAID_Context->spanArm = (span << RAID_CTX_SPANARM_SPAN_SHIFT) |
+		physArm;
+	return retval;
+}
+
+/*
+******************************************************************************
+*
+* MR_BuildRaidContext function
+*
+* This function will initiate command processing.  The start/end row and strip
+* information is calculated then the lock is acquired.
+* This function will return 0 if region lock was acquired OR return num strips
+*/
+u8
+MR_BuildRaidContext(struct IO_REQUEST_INFO *io_info,
+		    struct RAID_CONTEXT *pRAID_Context,
+		    struct MR_FW_RAID_MAP_ALL *map)
+{
+	struct MR_LD_RAID  *raid;
+	u32         ld, stripSize, stripe_mask;
+	u64         endLba, endStrip, endRow, start_row, start_strip;
+	u64         regStart;
+	u32         regSize;
+	u8          num_strips, numRows;
+	u16         ref_in_start_stripe, ref_in_end_stripe;
+	u64         ldStartBlock;
+	u32         numBlocks, ldTgtId;
+	u8          isRead;
+	u8	    retval = 0;
+
+	ldStartBlock = io_info->ldStartBlock;
+	numBlocks = io_info->numBlocks;
+	ldTgtId = io_info->ldTgtId;
+	isRead = io_info->isRead;
+
+	ld = MR_TargetIdToLdGet(ldTgtId, map);
+	raid = MR_LdRaidGet(ld, map);
+
+	stripSize = 1 << raid->stripeShift;
+	stripe_mask = stripSize-1;
+	/*
+	 * calculate starting row and stripe, and number of strips and rows
+	 */
+	start_strip         = ldStartBlock >> raid->stripeShift;
+	ref_in_start_stripe = (u16)(ldStartBlock & stripe_mask);
+	endLba              = ldStartBlock + numBlocks - 1;
+	ref_in_end_stripe   = (u16)(endLba & stripe_mask);
+	endStrip            = endLba >> raid->stripeShift;
+	num_strips          = (u8)(endStrip - start_strip + 1); /* End strip */
+	if (raid->rowDataSize == 0)
+		return FALSE;
+	start_row           =  mega_div64_32(start_strip, raid->rowDataSize);
+	endRow              =  mega_div64_32(endStrip, raid->rowDataSize);
+	numRows             = (u8)(endRow - start_row + 1);
+
+	/*
+	 * calculate region info.
+	 */
+
+	/* assume region is at the start of the first row */
+	regStart            = start_row << raid->stripeShift;
+	/* assume this IO needs the full row - we'll adjust if not true */
+	regSize             = stripSize;
+
+	/* If IO spans more than 1 strip, fp is not possible
+	   FP is not possible for writes on non-0 raid levels
+	   FP is not possible if LD is not capable */
+	if (num_strips > 1 || (!isRead && raid->level != 0) ||
+	    !raid->capability.fpCapable) {
+		io_info->fpOkForIo = FALSE;
+	} else {
+		io_info->fpOkForIo = TRUE;
+	}
+
+	if (numRows == 1) {
+		/* single-strip IOs can always lock only the data needed */
+		if (num_strips == 1) {
+			regStart += ref_in_start_stripe;
+			regSize = numBlocks;
+		}
+		/* multi-strip IOs always need to full stripe locked */
+	} else {
+		if (start_strip == (start_row + 1) * raid->rowDataSize - 1) {
+			/* If the start strip is the last in the start row */
+			regStart += ref_in_start_stripe;
+			regSize = stripSize - ref_in_start_stripe;
+			/* initialize count to sectors from startref to end
+			   of strip */
+		}
+
+		if (numRows > 2)
+			/* Add complete rows in the middle of the transfer */
+			regSize += (numRows-2) << raid->stripeShift;
+
+		/* if IO ends within first strip of last row */
+		if (endStrip == endRow*raid->rowDataSize)
+			regSize += ref_in_end_stripe+1;
+		else
+			regSize += stripSize;
+	}
+
+	pRAID_Context->timeoutValue     = map->raidMap.fpPdIoTimeoutSec;
+	pRAID_Context->regLockFlags     = (isRead) ? REGION_TYPE_SHARED_READ :
+		raid->regTypeReqOnWrite;
+	pRAID_Context->VirtualDiskTgtId = raid->targetId;
+	pRAID_Context->regLockRowLBA    = regStart;
+	pRAID_Context->regLockLength    = regSize;
+	pRAID_Context->configSeqNum	= raid->seqNum;
+
+	/*Get Phy Params only if FP capable, or else leave it to MR firmware
+	  to do the calculation.*/
+	if (io_info->fpOkForIo) {
+		retval = MR_GetPhyParams(ld, start_strip, ref_in_start_stripe,
+					 &io_info->pdBlock,
+					 &io_info->devHandle, pRAID_Context,
+					 map);
+		/* If IO on an invalid Pd, then FP i snot possible */
+		if (io_info->devHandle == MR_PD_INVALID)
+			io_info->fpOkForIo = FALSE;
+		return retval;
+	} else if (isRead) {
+		uint stripIdx;
+		for (stripIdx = 0; stripIdx < num_strips; stripIdx++) {
+			if (!MR_GetPhyParams(ld, start_strip + stripIdx,
+					     ref_in_start_stripe,
+					     &io_info->pdBlock,
+					     &io_info->devHandle,
+					     pRAID_Context, map))
+				return TRUE;
+		}
+	}
+	return TRUE;
+}
+
+void
+mr_update_load_balance_params(struct MR_FW_RAID_MAP_ALL *map,
+			      struct LD_LOAD_BALANCE_INFO *lbInfo)
+{
+	int ldCount;
+	u16 ld;
+	struct MR_LD_RAID *raid;
+
+	for (ldCount = 0; ldCount < MAX_LOGICAL_DRIVES; ldCount++) {
+		ld = MR_TargetIdToLdGet(ldCount, map);
+		if (ld >= MAX_LOGICAL_DRIVES) {
+			lbInfo[ldCount].loadBalanceFlag = 0;
+			continue;
+		}
+
+		raid = MR_LdRaidGet(ld, map);
+
+		/* Two drive Optimal RAID 1 */
+		if ((raid->level == 1)  &&  (raid->rowSize == 2) &&
+		    (raid->spanDepth == 1) && raid->ldState ==
+		    MR_LD_STATE_OPTIMAL) {
+			u32 pd, arRef;
+
+			lbInfo[ldCount].loadBalanceFlag = 1;
+
+			/* Get the array on which this span is present */
+			arRef = MR_LdSpanArrayGet(ld, 0, map);
+
+			/* Get the Pd */
+			pd = MR_ArPdGet(arRef, 0, map);
+			/* Get dev handle from Pd */
+			lbInfo[ldCount].raid1DevHandle[0] =
+				MR_PdDevHandleGet(pd, map);
+			/* Get the Pd */
+			pd = MR_ArPdGet(arRef, 1, map);
+
+			/* Get the dev handle from Pd */
+			lbInfo[ldCount].raid1DevHandle[1] =
+				MR_PdDevHandleGet(pd, map);
+		} else
+			lbInfo[ldCount].loadBalanceFlag = 0;
+	}
+}
+
+u8 megasas_get_best_arm(struct LD_LOAD_BALANCE_INFO *lbInfo, u8 arm, u64 block,
+			u32 count)
+{
+	u16     pend0, pend1;
+	u64     diff0, diff1;
+	u8      bestArm;
+
+	/* get the pending cmds for the data and mirror arms */
+	pend0 = atomic_read(&lbInfo->scsi_pending_cmds[0]);
+	pend1 = atomic_read(&lbInfo->scsi_pending_cmds[1]);
+
+	/* Determine the disk whose head is nearer to the req. block */
+	diff0 = ABS_DIFF(block, lbInfo->last_accessed_block[0]);
+	diff1 = ABS_DIFF(block, lbInfo->last_accessed_block[1]);
+	bestArm = (diff0 <= diff1 ? 0 : 1);
+
+	if ((bestArm == arm && pend0 > pend1 + 16)  ||
+	    (bestArm != arm && pend1 > pend0 + 16))
+		bestArm ^= 1;
+
+	/* Update the last accessed block on the correct pd */
+	lbInfo->last_accessed_block[bestArm] = block + count - 1;
+
+	return bestArm;
+}
+
+u16 get_updated_dev_handle(struct LD_LOAD_BALANCE_INFO *lbInfo,
+			   struct IO_REQUEST_INFO *io_info)
+{
+	u8 arm, old_arm;
+	u16 devHandle;
+
+	old_arm = lbInfo->raid1DevHandle[0] == io_info->devHandle ? 0 : 1;
+
+	/* get best new arm */
+	arm  = megasas_get_best_arm(lbInfo, old_arm, io_info->ldStartBlock,
+				    io_info->numBlocks);
+	devHandle = lbInfo->raid1DevHandle[arm];
+	atomic_inc(&lbInfo->scsi_pending_cmds[arm]);
+
+	return devHandle;
+}
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
new file mode 100644
index 00000000000..c1e09d5a619
--- /dev/null
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -0,0 +1,2248 @@
+/*
+ *  Linux MegaRAID driver for SAS based RAID controllers
+ *
+ *  Copyright (c) 2009-2011  LSI Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *  FILE: megaraid_sas_fusion.c
+ *
+ *  Authors: LSI Corporation
+ *           Sumant Patro
+ *           Adam Radford <linuxraid@lsi.com>
+ *
+ *  Send feedback to: <megaraidlinux@lsi.com>
+ *
+ *  Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
+ *     ATTN: Linuxraid
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <linux/uio.h>
+#include <linux/uaccess.h>
+#include <linux/fs.h>
+#include <linux/compat.h>
+#include <linux/blkdev.h>
+#include <linux/mutex.h>
+#include <linux/poll.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+
+#include "megaraid_sas_fusion.h"
+#include "megaraid_sas.h"
+
+extern void megasas_free_cmds(struct megasas_instance *instance);
+extern struct megasas_cmd *megasas_get_cmd(struct megasas_instance
+					   *instance);
+extern void
+megasas_complete_cmd(struct megasas_instance *instance,
+		     struct megasas_cmd *cmd, u8 alt_status);
+int megasas_is_ldio(struct scsi_cmnd *cmd);
+int
+wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd);
+
+void
+megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd);
+int megasas_alloc_cmds(struct megasas_instance *instance);
+int
+megasas_clear_intr_fusion(struct megasas_register_set __iomem *regs);
+int
+megasas_issue_polled(struct megasas_instance *instance,
+		     struct megasas_cmd *cmd);
+
+u8
+MR_BuildRaidContext(struct IO_REQUEST_INFO *io_info,
+		    struct RAID_CONTEXT *pRAID_Context,
+		    struct MR_FW_RAID_MAP_ALL *map);
+u16 MR_TargetIdToLdGet(u32 ldTgtId, struct MR_FW_RAID_MAP_ALL *map);
+struct MR_LD_RAID *MR_LdRaidGet(u32 ld, struct MR_FW_RAID_MAP_ALL *map);
+
+u16 MR_GetLDTgtId(u32 ld, struct MR_FW_RAID_MAP_ALL *map);
+u8 MR_ValidateMapInfo(struct MR_FW_RAID_MAP_ALL *map,
+		      struct LD_LOAD_BALANCE_INFO *lbInfo);
+u16 get_updated_dev_handle(struct LD_LOAD_BALANCE_INFO *lbInfo,
+			   struct IO_REQUEST_INFO *in_info);
+int megasas_transition_to_ready(struct megasas_instance *instance);
+void megaraid_sas_kill_hba(struct megasas_instance *instance);
+
+extern u32 megasas_dbg_lvl;
+
+/**
+ * megasas_enable_intr_fusion -	Enables interrupts
+ * @regs:			MFI register set
+ */
+void
+megasas_enable_intr_fusion(struct megasas_register_set __iomem *regs)
+{
+	writel(~MFI_FUSION_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_fusion - Disables interrupt
+ * @regs:			 MFI register set
+ */
+void
+megasas_disable_intr_fusion(struct megasas_register_set __iomem *regs)
+{
+	u32 mask = 0xFFFFFFFF;
+	u32 status;
+
+	writel(mask, &regs->outbound_intr_mask);
+	/* Dummy readl to force pci flush */
+	status = readl(&regs->outbound_intr_mask);
+}
+
+int
+megasas_clear_intr_fusion(struct megasas_register_set __iomem *regs)
+{
+	u32 status;
+	/*
+	 * Check if it is our interrupt
+	 */
+	status = readl(&regs->outbound_intr_status);
+
+	if (status & 1) {
+		writel(status, &regs->outbound_intr_status);
+		readl(&regs->outbound_intr_status);
+		return 1;
+	}
+	if (!(status & MFI_FUSION_ENABLE_INTERRUPT_MASK))
+		return 0;
+
+	/*
+	 * dummy read to flush PCI
+	 */
+	readl(&regs->outbound_intr_status);
+
+	return 1;
+}
+
+/**
+ * megasas_get_cmd_fusion -	Get a command from the free pool
+ * @instance:		Adapter soft state
+ *
+ * Returns a free command from the pool
+ */
+struct megasas_cmd_fusion *megasas_get_cmd_fusion(struct megasas_instance
+						  *instance)
+{
+	unsigned long flags;
+	struct fusion_context *fusion =
+		(struct fusion_context *)instance->ctrl_context;
+	struct megasas_cmd_fusion *cmd = NULL;
+
+	spin_lock_irqsave(&fusion->cmd_pool_lock, flags);
+
+	if (!list_empty(&fusion->cmd_pool)) {
+		cmd = list_entry((&fusion->cmd_pool)->next,
+				 struct megasas_cmd_fusion, list);
+		list_del_init(&cmd->list);
+	} else {
+		printk(KERN_ERR "megasas: Command pool (fusion) empty!\n");
+	}
+
+	spin_unlock_irqrestore(&fusion->cmd_pool_lock, flags);
+	return cmd;
+}
+
+/**
+ * megasas_return_cmd_fusion -	Return a cmd to free command pool
+ * @instance:		Adapter soft state
+ * @cmd:		Command packet to be returned to free command pool
+ */
+static inline void
+megasas_return_cmd_fusion(struct megasas_instance *instance,
+			  struct megasas_cmd_fusion *cmd)
+{
+	unsigned long flags;
+	struct fusion_context *fusion =
+		(struct fusion_context *)instance->ctrl_context;
+
+	spin_lock_irqsave(&fusion->cmd_pool_lock, flags);
+
+	cmd->scmd = NULL;
+	cmd->sync_cmd_idx = (u32)ULONG_MAX;
+	list_add_tail(&cmd->list, &fusion->cmd_pool);
+
+	spin_unlock_irqrestore(&fusion->cmd_pool_lock, flags);
+}
+
+/**
+ * megasas_teardown_frame_pool_fusion -	Destroy the cmd frame DMA pool
+ * @instance:				Adapter soft state
+ */
+static void megasas_teardown_frame_pool_fusion(
+	struct megasas_instance *instance)
+{
+	int i;
+	struct fusion_context *fusion = instance->ctrl_context;
+
+	u16 max_cmd = instance->max_fw_cmds;
+
+	struct megasas_cmd_fusion *cmd;
+
+	if (!fusion->sg_dma_pool || !fusion->sense_dma_pool) {
+		printk(KERN_ERR "megasas: dma pool is null. SG Pool %p, "
+		       "sense pool : %p\n", fusion->sg_dma_pool,
+		       fusion->sense_dma_pool);
+		return;
+	}
+
+	/*
+	 * Return all frames to pool
+	 */
+	for (i = 0; i < max_cmd; i++) {
+
+		cmd = fusion->cmd_list[i];
+
+		if (cmd->sg_frame)
+			pci_pool_free(fusion->sg_dma_pool, cmd->sg_frame,
+				      cmd->sg_frame_phys_addr);
+
+		if (cmd->sense)
+			pci_pool_free(fusion->sense_dma_pool, cmd->sense,
+				      cmd->sense_phys_addr);
+	}
+
+	/*
+	 * Now destroy the pool itself
+	 */
+	pci_pool_destroy(fusion->sg_dma_pool);
+	pci_pool_destroy(fusion->sense_dma_pool);
+
+	fusion->sg_dma_pool = NULL;
+	fusion->sense_dma_pool = NULL;
+}
+
+/**
+ * megasas_free_cmds_fusion -	Free all the cmds in the free cmd pool
+ * @instance:		Adapter soft state
+ */
+void
+megasas_free_cmds_fusion(struct megasas_instance *instance)
+{
+	int i;
+	struct fusion_context *fusion = instance->ctrl_context;
+
+	u32 max_cmds, req_sz, reply_sz, io_frames_sz;
+
+
+	req_sz = fusion->request_alloc_sz;
+	reply_sz = fusion->reply_alloc_sz;
+	io_frames_sz = fusion->io_frames_alloc_sz;
+
+	max_cmds = instance->max_fw_cmds;
+
+	/* Free descriptors and request Frames memory */
+	if (fusion->req_frames_desc)
+		dma_free_coherent(&instance->pdev->dev, req_sz,
+				  fusion->req_frames_desc,
+				  fusion->req_frames_desc_phys);
+
+	if (fusion->reply_frames_desc) {
+		pci_pool_free(fusion->reply_frames_desc_pool,
+			      fusion->reply_frames_desc,
+			      fusion->reply_frames_desc_phys);
+		pci_pool_destroy(fusion->reply_frames_desc_pool);
+	}
+
+	if (fusion->io_request_frames) {
+		pci_pool_free(fusion->io_request_frames_pool,
+			      fusion->io_request_frames,
+			      fusion->io_request_frames_phys);
+		pci_pool_destroy(fusion->io_request_frames_pool);
+	}
+
+	/* Free the Fusion frame pool */
+	megasas_teardown_frame_pool_fusion(instance);
+
+	/* Free all the commands in the cmd_list */
+	for (i = 0; i < max_cmds; i++)
+		kfree(fusion->cmd_list[i]);
+
+	/* Free the cmd_list buffer itself */
+	kfree(fusion->cmd_list);
+	fusion->cmd_list = NULL;
+
+	INIT_LIST_HEAD(&fusion->cmd_pool);
+}
+
+/**
+ * megasas_create_frame_pool_fusion -	Creates DMA pool for cmd frames
+ * @instance:			Adapter soft state
+ *
+ */
+static int megasas_create_frame_pool_fusion(struct megasas_instance *instance)
+{
+	int i;
+	u32 max_cmd;
+	struct fusion_context *fusion;
+	struct megasas_cmd_fusion *cmd;
+	u32 total_sz_chain_frame;
+
+	fusion = instance->ctrl_context;
+	max_cmd = instance->max_fw_cmds;
+
+	total_sz_chain_frame = MEGASAS_MAX_SZ_CHAIN_FRAME;
+
+	/*
+	 * Use DMA pool facility provided by PCI layer
+	 */
+
+	fusion->sg_dma_pool = pci_pool_create("megasas sg pool fusion",
+					      instance->pdev,
+					      total_sz_chain_frame, 4,
+					      0);
+	if (!fusion->sg_dma_pool) {
+		printk(KERN_DEBUG "megasas: failed to setup request pool "
+		       "fusion\n");
+		return -ENOMEM;
+	}
+	fusion->sense_dma_pool = pci_pool_create("megasas sense pool fusion",
+						 instance->pdev,
+						 SCSI_SENSE_BUFFERSIZE, 64, 0);
+
+	if (!fusion->sense_dma_pool) {
+		printk(KERN_DEBUG "megasas: failed to setup sense pool "
+		       "fusion\n");
+		pci_pool_destroy(fusion->sg_dma_pool);
+		fusion->sg_dma_pool = NULL;
+		return -ENOMEM;
+	}
+
+	/*
+	 * Allocate and attach a frame to each of the commands in cmd_list
+	 */
+	for (i = 0; i < max_cmd; i++) {
+
+		cmd = fusion->cmd_list[i];
+
+		cmd->sg_frame = pci_pool_alloc(fusion->sg_dma_pool,
+					       GFP_KERNEL,
+					       &cmd->sg_frame_phys_addr);
+
+		cmd->sense = pci_pool_alloc(fusion->sense_dma_pool,
+					    GFP_KERNEL, &cmd->sense_phys_addr);
+		/*
+		 * megasas_teardown_frame_pool_fusion() takes care of freeing
+		 * whatever has been allocated
+		 */
+		if (!cmd->sg_frame || !cmd->sense) {
+			printk(KERN_DEBUG "megasas: pci_pool_alloc failed\n");
+			megasas_teardown_frame_pool_fusion(instance);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+/**
+ * megasas_alloc_cmds_fusion -	Allocates the command packets
+ * @instance:		Adapter soft state
+ *
+ *
+ * Each frame has a 32-bit field called context. This context is used to get
+ * back the megasas_cmd_fusion from the frame when a frame gets completed
+ * In this driver, the 32 bit values are the indices into an array cmd_list.
+ * This array is used only to look up the megasas_cmd_fusion given the context.
+ * The free commands themselves are maintained in a linked list called cmd_pool.
+ *
+ * cmds are formed in the io_request and sg_frame members of the
+ * megasas_cmd_fusion. The context field is used to get a request descriptor
+ * and is used as SMID of the cmd.
+ * SMID value range is from 1 to max_fw_cmds.
+ */
+int
+megasas_alloc_cmds_fusion(struct megasas_instance *instance)
+{
+	int i, j;
+	u32 max_cmd, io_frames_sz;
+	struct fusion_context *fusion;
+	struct megasas_cmd_fusion *cmd;
+	union MPI2_REPLY_DESCRIPTORS_UNION *reply_desc;
+	u32 offset;
+	dma_addr_t io_req_base_phys;
+	u8 *io_req_base;
+
+	fusion = instance->ctrl_context;
+
+	max_cmd = instance->max_fw_cmds;
+
+	fusion->req_frames_desc =
+		dma_alloc_coherent(&instance->pdev->dev,
+				   fusion->request_alloc_sz,
+				   &fusion->req_frames_desc_phys, GFP_KERNEL);
+
+	if (!fusion->req_frames_desc) {
+		printk(KERN_ERR "megasas; Could not allocate memory for "
+		       "request_frames\n");
+		goto fail_req_desc;
+	}
+
+	fusion->reply_frames_desc_pool =
+		pci_pool_create("reply_frames pool", instance->pdev,
+				fusion->reply_alloc_sz, 16, 0);
+
+	if (!fusion->reply_frames_desc_pool) {
+		printk(KERN_ERR "megasas; Could not allocate memory for "
+		       "reply_frame pool\n");
+		goto fail_reply_desc;
+	}
+
+	fusion->reply_frames_desc =
+		pci_pool_alloc(fusion->reply_frames_desc_pool, GFP_KERNEL,
+			       &fusion->reply_frames_desc_phys);
+	if (!fusion->reply_frames_desc) {
+		printk(KERN_ERR "megasas; Could not allocate memory for "
+		       "reply_frame pool\n");
+		pci_pool_destroy(fusion->reply_frames_desc_pool);
+		goto fail_reply_desc;
+	}
+
+	reply_desc = fusion->reply_frames_desc;
+	for (i = 0; i < fusion->reply_q_depth; i++, reply_desc++)
+		reply_desc->Words = ULLONG_MAX;
+
+	io_frames_sz = fusion->io_frames_alloc_sz;
+
+	fusion->io_request_frames_pool =
+		pci_pool_create("io_request_frames pool", instance->pdev,
+				fusion->io_frames_alloc_sz, 16, 0);
+
+	if (!fusion->io_request_frames_pool) {
+		printk(KERN_ERR "megasas: Could not allocate memory for "
+		       "io_request_frame pool\n");
+		goto fail_io_frames;
+	}
+
+	fusion->io_request_frames =
+		pci_pool_alloc(fusion->io_request_frames_pool, GFP_KERNEL,
+			       &fusion->io_request_frames_phys);
+	if (!fusion->io_request_frames) {
+		printk(KERN_ERR "megasas: Could not allocate memory for "
+		       "io_request_frames frames\n");
+		pci_pool_destroy(fusion->io_request_frames_pool);
+		goto fail_io_frames;
+	}
+
+	/*
+	 * fusion->cmd_list is an array of struct megasas_cmd_fusion pointers.
+	 * Allocate the dynamic array first and then allocate individual
+	 * commands.
+	 */
+	fusion->cmd_list = kmalloc(sizeof(struct megasas_cmd_fusion *)
+				   *max_cmd, GFP_KERNEL);
+
+	if (!fusion->cmd_list) {
+		printk(KERN_DEBUG "megasas: out of memory. Could not alloc "
+		       "memory for cmd_list_fusion\n");
+		goto fail_cmd_list;
+	}
+
+	memset(fusion->cmd_list, 0, sizeof(struct megasas_cmd_fusion *)
+	       *max_cmd);
+
+	max_cmd = instance->max_fw_cmds;
+	for (i = 0; i < max_cmd; i++) {
+		fusion->cmd_list[i] = kmalloc(sizeof(struct megasas_cmd_fusion),
+					      GFP_KERNEL);
+		if (!fusion->cmd_list[i]) {
+			printk(KERN_ERR "Could not alloc cmd list fusion\n");
+
+			for (j = 0; j < i; j++)
+				kfree(fusion->cmd_list[j]);
+
+			kfree(fusion->cmd_list);
+			fusion->cmd_list = NULL;
+			goto fail_cmd_list;
+		}
+	}
+
+	/* The first 256 bytes (SMID 0) is not used. Don't add to cmd list */
+	io_req_base = fusion->io_request_frames +
+		MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
+	io_req_base_phys = fusion->io_request_frames_phys +
+		MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE;
+
+	/*
+	 * Add all the commands to command pool (fusion->cmd_pool)
+	 */
+
+	/* SMID 0 is reserved. Set SMID/index from 1 */
+	for (i = 0; i < max_cmd; i++) {
+		cmd = fusion->cmd_list[i];
+		offset = MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE * i;
+		memset(cmd, 0, sizeof(struct megasas_cmd_fusion));
+		cmd->index = i + 1;
+		cmd->scmd = NULL;
+		cmd->sync_cmd_idx = (u32)ULONG_MAX; /* Set to Invalid */
+		cmd->instance = instance;
+		cmd->io_request =
+			(struct MPI2_RAID_SCSI_IO_REQUEST *)
+		  (io_req_base + offset);
+		memset(cmd->io_request, 0,
+		       sizeof(struct MPI2_RAID_SCSI_IO_REQUEST));
+		cmd->io_request_phys_addr = io_req_base_phys + offset;
+
+		list_add_tail(&cmd->list, &fusion->cmd_pool);
+	}
+
+	/*
+	 * Create a frame pool and assign one frame to each cmd
+	 */
+	if (megasas_create_frame_pool_fusion(instance)) {
+		printk(KERN_DEBUG "megasas: Error creating frame DMA pool\n");
+		megasas_free_cmds_fusion(instance);
+		goto fail_req_desc;
+	}
+
+	return 0;
+
+fail_cmd_list:
+	pci_pool_free(fusion->io_request_frames_pool, fusion->io_request_frames,
+		      fusion->io_request_frames_phys);
+	pci_pool_destroy(fusion->io_request_frames_pool);
+fail_io_frames:
+	dma_free_coherent(&instance->pdev->dev, fusion->request_alloc_sz,
+			  fusion->reply_frames_desc,
+			  fusion->reply_frames_desc_phys);
+	pci_pool_free(fusion->reply_frames_desc_pool,
+		      fusion->reply_frames_desc,
+		      fusion->reply_frames_desc_phys);
+	pci_pool_destroy(fusion->reply_frames_desc_pool);
+
+fail_reply_desc:
+	dma_free_coherent(&instance->pdev->dev, fusion->request_alloc_sz,
+			  fusion->req_frames_desc,
+			  fusion->req_frames_desc_phys);
+fail_req_desc:
+	return -ENOMEM;
+}
+
+/**
+ * wait_and_poll -	Issues a polling command
+ * @instance:			Adapter soft state
+ * @cmd:			Command packet to be issued
+ *
+ * For polling, MFI requires the cmd_status to be set to 0xFF before posting.
+ */
+int
+wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd)
+{
+	int i;
+	struct megasas_header *frame_hdr = &cmd->frame->hdr;
+
+	u32 msecs = MFI_POLL_TIMEOUT_SECS * 1000;
+
+	/*
+	 * Wait for cmd_status to change
+	 */
+	for (i = 0; (i < msecs) && (frame_hdr->cmd_status == 0xff); i += 20) {
+		rmb();
+		msleep(20);
+	}
+
+	if (frame_hdr->cmd_status == 0xff)
+		return -ETIME;
+
+	return 0;
+}
+
+/**
+ * megasas_ioc_init_fusion -	Initializes the FW
+ * @instance:		Adapter soft state
+ *
+ * Issues the IOC Init cmd
+ */
+int
+megasas_ioc_init_fusion(struct megasas_instance *instance)
+{
+	struct megasas_init_frame *init_frame;
+	struct MPI2_IOC_INIT_REQUEST *IOCInitMessage;
+	dma_addr_t	ioc_init_handle;
+	u32 context;
+	struct megasas_cmd *cmd;
+	u8 ret;
+	struct fusion_context *fusion;
+	union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+	int i;
+	struct megasas_header *frame_hdr;
+
+	fusion = instance->ctrl_context;
+
+	cmd = megasas_get_cmd(instance);
+
+	if (!cmd) {
+		printk(KERN_ERR "Could not allocate cmd for INIT Frame\n");
+		ret = 1;
+		goto fail_get_cmd;
+	}
+
+	IOCInitMessage =
+	  dma_alloc_coherent(&instance->pdev->dev,
+			     sizeof(struct MPI2_IOC_INIT_REQUEST),
+			     &ioc_init_handle, GFP_KERNEL);
+
+	if (!IOCInitMessage) {
+		printk(KERN_ERR "Could not allocate memory for "
+		       "IOCInitMessage\n");
+		ret = 1;
+		goto fail_fw_init;
+	}
+
+	memset(IOCInitMessage, 0, sizeof(struct MPI2_IOC_INIT_REQUEST));
+
+	IOCInitMessage->Function = MPI2_FUNCTION_IOC_INIT;
+	IOCInitMessage->WhoInit	= MPI2_WHOINIT_HOST_DRIVER;
+	IOCInitMessage->MsgVersion = MPI2_VERSION;
+	IOCInitMessage->HeaderVersion = MPI2_HEADER_VERSION;
+	IOCInitMessage->SystemRequestFrameSize =
+		MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE / 4;
+
+	IOCInitMessage->ReplyDescriptorPostQueueDepth = fusion->reply_q_depth;
+	IOCInitMessage->ReplyDescriptorPostQueueAddress	=
+		fusion->reply_frames_desc_phys;
+	IOCInitMessage->SystemRequestFrameBaseAddress =
+		fusion->io_request_frames_phys;
+
+	init_frame = (struct megasas_init_frame *)cmd->frame;
+	memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
+
+	frame_hdr = &cmd->frame->hdr;
+	context = init_frame->context;
+	init_frame->context = context;
+
+	frame_hdr->cmd_status = 0xFF;
+	frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
+
+	init_frame->cmd	= MFI_CMD_INIT;
+	init_frame->cmd_status = 0xFF;
+
+	init_frame->queue_info_new_phys_addr_lo = ioc_init_handle;
+	init_frame->data_xfer_len = sizeof(struct MPI2_IOC_INIT_REQUEST);
+
+	req_desc =
+	  (union MEGASAS_REQUEST_DESCRIPTOR_UNION *)fusion->req_frames_desc;
+
+	req_desc->Words = cmd->frame_phys_addr;
+	req_desc->MFAIo.RequestFlags =
+		(MEGASAS_REQ_DESCRIPT_FLAGS_MFA <<
+		 MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+
+	/*
+	 * disable the intr before firing the init frame
+	 */
+	instance->instancet->disable_intr(instance->reg_set);
+
+	for (i = 0; i < (10 * 1000); i += 20) {
+		if (readl(&instance->reg_set->doorbell) & 1)
+			msleep(20);
+		else
+			break;
+	}
+
+	instance->instancet->fire_cmd(instance, req_desc->u.low,
+				      req_desc->u.high, instance->reg_set);
+
+	wait_and_poll(instance, cmd);
+
+	frame_hdr = &cmd->frame->hdr;
+	if (frame_hdr->cmd_status != 0) {
+		ret = 1;
+		goto fail_fw_init;
+	}
+	printk(KERN_ERR "megasas:IOC Init cmd success\n");
+
+	ret = 0;
+
+fail_fw_init:
+	megasas_return_cmd(instance, cmd);
+	if (IOCInitMessage)
+		dma_free_coherent(&instance->pdev->dev,
+				  sizeof(struct MPI2_IOC_INIT_REQUEST),
+				  IOCInitMessage, ioc_init_handle);
+fail_get_cmd:
+	return ret;
+}
+
+/*
+ * megasas_return_cmd_for_smid -	Returns a cmd_fusion for a SMID
+ * @instance:				Adapter soft state
+ *
+ */
+void
+megasas_return_cmd_for_smid(struct megasas_instance *instance, u16 smid)
+{
+	struct fusion_context *fusion;
+	struct megasas_cmd_fusion *cmd;
+
+	fusion = instance->ctrl_context;
+	cmd = fusion->cmd_list[smid - 1];
+	megasas_return_cmd_fusion(instance, cmd);
+}
+
+/*
+ * megasas_get_ld_map_info -	Returns FW's ld_map structure
+ * @instance:				Adapter soft state
+ * @pend:				Pend the command or not
+ * Issues an internal command (DCMD) to get the FW's controller PD
+ * list structure.  This information is mainly used to find out SYSTEM
+ * supported by the FW.
+ */
+static int
+megasas_get_ld_map_info(struct megasas_instance *instance)
+{
+	int ret = 0;
+	struct megasas_cmd *cmd;
+	struct megasas_dcmd_frame *dcmd;
+	struct MR_FW_RAID_MAP_ALL *ci;
+	dma_addr_t ci_h = 0;
+	u32 size_map_info;
+	struct fusion_context *fusion;
+
+	cmd = megasas_get_cmd(instance);
+
+	if (!cmd) {
+		printk(KERN_DEBUG "megasas: Failed to get cmd for map info.\n");
+		return -ENOMEM;
+	}
+
+	fusion = instance->ctrl_context;
+
+	if (!fusion) {
+		megasas_return_cmd(instance, cmd);
+		return 1;
+	}
+
+	dcmd = &cmd->frame->dcmd;
+
+	size_map_info = sizeof(struct MR_FW_RAID_MAP) +
+		(sizeof(struct MR_LD_SPAN_MAP) *(MAX_LOGICAL_DRIVES - 1));
+
+	ci = fusion->ld_map[(instance->map_id & 1)];
+	ci_h = fusion->ld_map_phys[(instance->map_id & 1)];
+
+	if (!ci) {
+		printk(KERN_DEBUG "Failed to alloc mem for ld_map_info\n");
+		megasas_return_cmd(instance, cmd);
+		return -ENOMEM;
+	}
+
+	memset(ci, 0, sizeof(*ci));
+	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+	dcmd->cmd = MFI_CMD_DCMD;
+	dcmd->cmd_status = 0xFF;
+	dcmd->sge_count = 1;
+	dcmd->flags = MFI_FRAME_DIR_READ;
+	dcmd->timeout = 0;
+	dcmd->pad_0 = 0;
+	dcmd->data_xfer_len = size_map_info;
+	dcmd->opcode = MR_DCMD_LD_MAP_GET_INFO;
+	dcmd->sgl.sge32[0].phys_addr = ci_h;
+	dcmd->sgl.sge32[0].length = size_map_info;
+
+	if (!megasas_issue_polled(instance, cmd))
+		ret = 0;
+	else {
+		printk(KERN_ERR "megasas: Get LD Map Info Failed\n");
+		ret = -1;
+	}
+
+	megasas_return_cmd(instance, cmd);
+
+	return ret;
+}
+
+u8
+megasas_get_map_info(struct megasas_instance *instance)
+{
+	struct fusion_context *fusion = instance->ctrl_context;
+
+	fusion->fast_path_io = 0;
+	if (!megasas_get_ld_map_info(instance)) {
+		if (MR_ValidateMapInfo(fusion->ld_map[(instance->map_id & 1)],
+				       fusion->load_balance_info)) {
+			fusion->fast_path_io = 1;
+			return 0;
+		}
+	}
+	return 1;
+}
+
+/*
+ * megasas_sync_map_info -	Returns FW's ld_map structure
+ * @instance:				Adapter soft state
+ *
+ * Issues an internal command (DCMD) to get the FW's controller PD
+ * list structure.  This information is mainly used to find out SYSTEM
+ * supported by the FW.
+ */
+int
+megasas_sync_map_info(struct megasas_instance *instance)
+{
+	int ret = 0, i;
+	struct megasas_cmd *cmd;
+	struct megasas_dcmd_frame *dcmd;
+	u32 size_sync_info, num_lds;
+	struct fusion_context *fusion;
+	struct MR_LD_TARGET_SYNC *ci = NULL;
+	struct MR_FW_RAID_MAP_ALL *map;
+	struct MR_LD_RAID  *raid;
+	struct MR_LD_TARGET_SYNC *ld_sync;
+	dma_addr_t ci_h = 0;
+	u32 size_map_info;
+
+	cmd = megasas_get_cmd(instance);
+
+	if (!cmd) {
+		printk(KERN_DEBUG "megasas: Failed to get cmd for sync"
+		       "info.\n");
+		return -ENOMEM;
+	}
+
+	fusion = instance->ctrl_context;
+
+	if (!fusion) {
+		megasas_return_cmd(instance, cmd);
+		return 1;
+	}
+
+	map = fusion->ld_map[instance->map_id & 1];
+
+	num_lds = map->raidMap.ldCount;
+
+	dcmd = &cmd->frame->dcmd;
+
+	size_sync_info = sizeof(struct MR_LD_TARGET_SYNC) *num_lds;
+
+	memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE);
+
+	ci = (struct MR_LD_TARGET_SYNC *)
+	  fusion->ld_map[(instance->map_id - 1) & 1];
+	memset(ci, 0, sizeof(struct MR_FW_RAID_MAP_ALL));
+
+	ci_h = fusion->ld_map_phys[(instance->map_id - 1) & 1];
+
+	ld_sync = (struct MR_LD_TARGET_SYNC *)ci;
+
+	for (i = 0; i < num_lds; i++, ld_sync++) {
+		raid = MR_LdRaidGet(i, map);
+		ld_sync->targetId = MR_GetLDTgtId(i, map);
+		ld_sync->seqNum = raid->seqNum;
+	}
+
+	size_map_info = sizeof(struct MR_FW_RAID_MAP) +
+		(sizeof(struct MR_LD_SPAN_MAP) *(MAX_LOGICAL_DRIVES - 1));
+
+	dcmd->cmd = MFI_CMD_DCMD;
+	dcmd->cmd_status = 0xFF;
+	dcmd->sge_count = 1;
+	dcmd->flags = MFI_FRAME_DIR_WRITE;
+	dcmd->timeout = 0;
+	dcmd->pad_0 = 0;
+	dcmd->data_xfer_len = size_map_info;
+	dcmd->mbox.b[0] = num_lds;
+	dcmd->mbox.b[1] = MEGASAS_DCMD_MBOX_PEND_FLAG;
+	dcmd->opcode = MR_DCMD_LD_MAP_GET_INFO;
+	dcmd->sgl.sge32[0].phys_addr = ci_h;
+	dcmd->sgl.sge32[0].length = size_map_info;
+
+	instance->map_update_cmd = cmd;
+
+	instance->instancet->issue_dcmd(instance, cmd);
+
+	return ret;
+}
+
+/**
+ * megasas_init_adapter_fusion -	Initializes the FW
+ * @instance:		Adapter soft state
+ *
+ * This is the main function for initializing firmware.
+ */
+u32
+megasas_init_adapter_fusion(struct megasas_instance *instance)
+{
+	struct megasas_register_set __iomem *reg_set;
+	struct fusion_context *fusion;
+	u32 max_cmd;
+	int i = 0;
+
+	fusion = instance->ctrl_context;
+
+	reg_set = instance->reg_set;
+
+	/*
+	 * Get various operational parameters from status register
+	 */
+	instance->max_fw_cmds =
+		instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF;
+	instance->max_fw_cmds = min(instance->max_fw_cmds, (u16)1008);
+
+	/*
+	 * Reduce the max supported cmds by 1. This is to ensure that the
+	 * reply_q_sz (1 more than the max cmd that driver may send)
+	 * does not exceed max cmds that the FW can support
+	 */
+	instance->max_fw_cmds = instance->max_fw_cmds-1;
+	/* Only internal cmds (DCMD) need to have MFI frames */
+	instance->max_mfi_cmds = MEGASAS_INT_CMDS;
+
+	max_cmd = instance->max_fw_cmds;
+
+	fusion->reply_q_depth = ((max_cmd + 1 + 15)/16)*16;
+
+	fusion->request_alloc_sz =
+		sizeof(union MEGASAS_REQUEST_DESCRIPTOR_UNION) *max_cmd;
+	fusion->reply_alloc_sz = sizeof(union MPI2_REPLY_DESCRIPTORS_UNION)
+		*(fusion->reply_q_depth);
+	fusion->io_frames_alloc_sz = MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE +
+		(MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE *
+		 (max_cmd + 1)); /* Extra 1 for SMID 0 */
+
+	fusion->max_sge_in_main_msg =
+	  (MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE -
+	   offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL))/16;
+
+	fusion->max_sge_in_chain =
+		MEGASAS_MAX_SZ_CHAIN_FRAME / sizeof(union MPI2_SGE_IO_UNION);
+
+	instance->max_num_sge = fusion->max_sge_in_main_msg +
+		fusion->max_sge_in_chain - 2;
+
+	/* Used for pass thru MFI frame (DCMD) */
+	fusion->chain_offset_mfi_pthru =
+		offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL)/16;
+
+	fusion->chain_offset_io_request =
+		(MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE -
+		 sizeof(union MPI2_SGE_IO_UNION))/16;
+
+	fusion->last_reply_idx = 0;
+
+	/*
+	 * Allocate memory for descriptors
+	 * Create a pool of commands
+	 */
+	if (megasas_alloc_cmds(instance))
+		goto fail_alloc_mfi_cmds;
+	if (megasas_alloc_cmds_fusion(instance))
+		goto fail_alloc_cmds;
+
+	if (megasas_ioc_init_fusion(instance))
+		goto fail_ioc_init;
+
+	instance->flag_ieee = 1;
+
+	fusion->map_sz =  sizeof(struct MR_FW_RAID_MAP) +
+	  (sizeof(struct MR_LD_SPAN_MAP) *(MAX_LOGICAL_DRIVES - 1));
+
+	fusion->fast_path_io = 0;
+
+	for (i = 0; i < 2; i++) {
+		fusion->ld_map[i] = dma_alloc_coherent(&instance->pdev->dev,
+						       fusion->map_sz,
+						       &fusion->ld_map_phys[i],
+						       GFP_KERNEL);
+		if (!fusion->ld_map[i]) {
+			printk(KERN_ERR "megasas: Could not allocate memory "
+			       "for map info\n");
+			goto fail_map_info;
+		}
+	}
+
+	if (!megasas_get_map_info(instance))
+		megasas_sync_map_info(instance);
+
+	return 0;
+
+fail_alloc_cmds:
+fail_alloc_mfi_cmds:
+fail_map_info:
+	if (i == 1)
+		dma_free_coherent(&instance->pdev->dev, fusion->map_sz,
+				  fusion->ld_map[0], fusion->ld_map_phys[0]);
+fail_ioc_init:
+	return 1;
+}
+
+/**
+ * megasas_fire_cmd_fusion -	Sends command to the FW
+ * @frame_phys_addr :		Physical address of cmd
+ * @frame_count :		Number of frames for the command
+ * @regs :			MFI register set
+ */
+void
+megasas_fire_cmd_fusion(struct megasas_instance *instance,
+			dma_addr_t req_desc_lo,
+			u32 req_desc_hi,
+			struct megasas_register_set __iomem *regs)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&instance->hba_lock, flags);
+
+	writel(req_desc_lo,
+	       &(regs)->inbound_low_queue_port);
+	writel(req_desc_hi, &(regs)->inbound_high_queue_port);
+	spin_unlock_irqrestore(&instance->hba_lock, flags);
+}
+
+/**
+ * map_cmd_status -	Maps FW cmd status to OS cmd status
+ * @cmd :		Pointer to cmd
+ * @status :		status of cmd returned by FW
+ * @ext_status :	ext status of cmd returned by FW
+ */
+
+void
+map_cmd_status(struct megasas_cmd_fusion *cmd, u8 status, u8 ext_status)
+{
+
+	switch (status) {
+
+	case MFI_STAT_OK:
+		cmd->scmd->result = DID_OK << 16;
+		break;
+
+	case MFI_STAT_SCSI_IO_FAILED:
+	case MFI_STAT_LD_INIT_IN_PROGRESS:
+		cmd->scmd->result = (DID_ERROR << 16) | ext_status;
+		break;
+
+	case MFI_STAT_SCSI_DONE_WITH_ERROR:
+
+		cmd->scmd->result = (DID_OK << 16) | ext_status;
+		if (ext_status == SAM_STAT_CHECK_CONDITION) {
+			memset(cmd->scmd->sense_buffer, 0,
+			       SCSI_SENSE_BUFFERSIZE);
+			memcpy(cmd->scmd->sense_buffer, cmd->sense,
+			       SCSI_SENSE_BUFFERSIZE);
+			cmd->scmd->result |= DRIVER_SENSE << 24;
+		}
+		break;
+
+	case MFI_STAT_LD_OFFLINE:
+	case MFI_STAT_DEVICE_NOT_FOUND:
+		cmd->scmd->result = DID_BAD_TARGET << 16;
+		break;
+
+	default:
+		printk(KERN_DEBUG "megasas: FW status %#x\n", status);
+		cmd->scmd->result = DID_ERROR << 16;
+		break;
+	}
+}
+
+/**
+ * megasas_make_sgl_fusion -	Prepares 32-bit SGL
+ * @instance:		Adapter soft state
+ * @scp:		SCSI command from the mid-layer
+ * @sgl_ptr:		SGL to be filled in
+ * @cmd:		cmd we are working on
+ *
+ * If successful, this function returns the number of SG elements.
+ */
+static int
+megasas_make_sgl_fusion(struct megasas_instance *instance,
+			struct scsi_cmnd *scp,
+			struct MPI25_IEEE_SGE_CHAIN64 *sgl_ptr,
+			struct megasas_cmd_fusion *cmd)
+{
+	int i, sg_processed;
+	int sge_count, sge_idx;
+	struct scatterlist *os_sgl;
+	struct fusion_context *fusion;
+
+	fusion = instance->ctrl_context;
+
+	cmd->io_request->ChainOffset = 0;
+
+	sge_count = scsi_dma_map(scp);
+
+	BUG_ON(sge_count < 0);
+
+	if (sge_count > instance->max_num_sge || !sge_count)
+		return sge_count;
+
+	if (sge_count > fusion->max_sge_in_main_msg) {
+		/* One element to store the chain info */
+		sge_idx = fusion->max_sge_in_main_msg - 1;
+	} else
+		sge_idx = sge_count;
+
+	scsi_for_each_sg(scp, os_sgl, sge_count, i) {
+		sgl_ptr->Length = sg_dma_len(os_sgl);
+		sgl_ptr->Address = sg_dma_address(os_sgl);
+		sgl_ptr->Flags = 0;
+		sgl_ptr++;
+
+		sg_processed = i + 1;
+
+		if ((sg_processed ==  (fusion->max_sge_in_main_msg - 1)) &&
+		    (sge_count > fusion->max_sge_in_main_msg)) {
+
+			struct MPI25_IEEE_SGE_CHAIN64 *sg_chain;
+			cmd->io_request->ChainOffset =
+				fusion->chain_offset_io_request;
+			sg_chain = sgl_ptr;
+			/* Prepare chain element */
+			sg_chain->NextChainOffset = 0;
+			sg_chain->Flags = (IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+					   MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR);
+			sg_chain->Length =  (sizeof(union MPI2_SGE_IO_UNION)
+					     *(sge_count - sg_processed));
+			sg_chain->Address = cmd->sg_frame_phys_addr;
+
+			sgl_ptr =
+			  (struct MPI25_IEEE_SGE_CHAIN64 *)cmd->sg_frame;
+		}
+	}
+
+	return sge_count;
+}
+
+/**
+ * megasas_set_pd_lba -	Sets PD LBA
+ * @cdb:		CDB
+ * @cdb_len:		cdb length
+ * @start_blk:		Start block of IO
+ *
+ * Used to set the PD LBA in CDB for FP IOs
+ */
+void
+megasas_set_pd_lba(struct MPI2_RAID_SCSI_IO_REQUEST *io_request, u8 cdb_len,
+		   struct IO_REQUEST_INFO *io_info, struct scsi_cmnd *scp,
+		   struct MR_FW_RAID_MAP_ALL *local_map_ptr, u32 ref_tag)
+{
+	struct MR_LD_RAID *raid;
+	u32 ld;
+	u64 start_blk = io_info->pdBlock;
+	u8 *cdb = io_request->CDB.CDB32;
+	u32 num_blocks = io_info->numBlocks;
+	u8 opcode, flagvals, groupnum, control;
+
+	/* Check if T10 PI (DIF) is enabled for this LD */
+	ld = MR_TargetIdToLdGet(io_info->ldTgtId, local_map_ptr);
+	raid = MR_LdRaidGet(ld, local_map_ptr);
+	if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER) {
+		memset(cdb, 0, sizeof(io_request->CDB.CDB32));
+		cdb[0] =  MEGASAS_SCSI_VARIABLE_LENGTH_CMD;
+		cdb[7] =  MEGASAS_SCSI_ADDL_CDB_LEN;
+
+		if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
+			cdb[9] = MEGASAS_SCSI_SERVICE_ACTION_READ32;
+		else
+			cdb[9] = MEGASAS_SCSI_SERVICE_ACTION_WRITE32;
+		cdb[10] = MEGASAS_RD_WR_PROTECT_CHECK_ALL;
+
+		/* LBA */
+		cdb[12] = (u8)((start_blk >> 56) & 0xff);
+		cdb[13] = (u8)((start_blk >> 48) & 0xff);
+		cdb[14] = (u8)((start_blk >> 40) & 0xff);
+		cdb[15] = (u8)((start_blk >> 32) & 0xff);
+		cdb[16] = (u8)((start_blk >> 24) & 0xff);
+		cdb[17] = (u8)((start_blk >> 16) & 0xff);
+		cdb[18] = (u8)((start_blk >> 8) & 0xff);
+		cdb[19] = (u8)(start_blk & 0xff);
+
+		/* Logical block reference tag */
+		io_request->CDB.EEDP32.PrimaryReferenceTag =
+			cpu_to_be32(ref_tag);
+		io_request->CDB.EEDP32.PrimaryApplicationTagMask = 0xffff;
+
+		io_request->DataLength = num_blocks * 512;
+		io_request->IoFlags = 32; /* Specify 32-byte cdb */
+
+		/* Transfer length */
+		cdb[28] = (u8)((num_blocks >> 24) & 0xff);
+		cdb[29] = (u8)((num_blocks >> 16) & 0xff);
+		cdb[30] = (u8)((num_blocks >> 8) & 0xff);
+		cdb[31] = (u8)(num_blocks & 0xff);
+
+		/* set SCSI IO EEDPFlags */
+		if (scp->sc_data_direction == PCI_DMA_FROMDEVICE) {
+			io_request->EEDPFlags =
+				MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG  |
+				MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
+				MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP |
+				MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG |
+				MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
+		} else {
+			io_request->EEDPFlags =
+				MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
+				MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
+		}
+		io_request->Control |= (0x4 << 26);
+		io_request->EEDPBlockSize = MEGASAS_EEDPBLOCKSIZE;
+	} else {
+		/* Some drives don't support 16/12 byte CDB's, convert to 10 */
+		if (((cdb_len == 12) || (cdb_len == 16)) &&
+		    (start_blk <= 0xffffffff)) {
+			if (cdb_len == 16) {
+				opcode = cdb[0] == READ_16 ? READ_10 : WRITE_10;
+				flagvals = cdb[1];
+				groupnum = cdb[14];
+				control = cdb[15];
+			} else {
+				opcode = cdb[0] == READ_12 ? READ_10 : WRITE_10;
+				flagvals = cdb[1];
+				groupnum = cdb[10];
+				control = cdb[11];
+			}
+
+			memset(cdb, 0, sizeof(io_request->CDB.CDB32));
+
+			cdb[0] = opcode;
+			cdb[1] = flagvals;
+			cdb[6] = groupnum;
+			cdb[9] = control;
+
+			/* Transfer length */
+			cdb[8] = (u8)(num_blocks & 0xff);
+			cdb[7] = (u8)((num_blocks >> 8) & 0xff);
+
+			cdb_len = 10;
+		}
+
+		/* Normal case, just load LBA here */
+		switch (cdb_len) {
+		case 6:
+		{
+			u8 val = cdb[1] & 0xE0;
+			cdb[3] = (u8)(start_blk & 0xff);
+			cdb[2] = (u8)((start_blk >> 8) & 0xff);
+			cdb[1] = val | ((u8)(start_blk >> 16) & 0x1f);
+			break;
+		}
+		case 10:
+			cdb[5] = (u8)(start_blk & 0xff);
+			cdb[4] = (u8)((start_blk >> 8) & 0xff);
+			cdb[3] = (u8)((start_blk >> 16) & 0xff);
+			cdb[2] = (u8)((start_blk >> 24) & 0xff);
+			break;
+		case 12:
+			cdb[5]    = (u8)(start_blk & 0xff);
+			cdb[4]    = (u8)((start_blk >> 8) & 0xff);
+			cdb[3]    = (u8)((start_blk >> 16) & 0xff);
+			cdb[2]    = (u8)((start_blk >> 24) & 0xff);
+			break;
+		case 16:
+			cdb[9]    = (u8)(start_blk & 0xff);
+			cdb[8]    = (u8)((start_blk >> 8) & 0xff);
+			cdb[7]    = (u8)((start_blk >> 16) & 0xff);
+			cdb[6]    = (u8)((start_blk >> 24) & 0xff);
+			cdb[5]    = (u8)((start_blk >> 32) & 0xff);
+			cdb[4]    = (u8)((start_blk >> 40) & 0xff);
+			cdb[3]    = (u8)((start_blk >> 48) & 0xff);
+			cdb[2]    = (u8)((start_blk >> 56) & 0xff);
+			break;
+		}
+	}
+}
+
+/**
+ * megasas_build_ldio_fusion -	Prepares IOs to devices
+ * @instance:		Adapter soft state
+ * @scp:		SCSI command
+ * @cmd:		Command to be prepared
+ *
+ * Prepares the io_request and chain elements (sg_frame) for IO
+ * The IO can be for PD (Fast Path) or LD
+ */
+void
+megasas_build_ldio_fusion(struct megasas_instance *instance,
+			  struct scsi_cmnd *scp,
+			  struct megasas_cmd_fusion *cmd)
+{
+	u8 fp_possible;
+	u32 start_lba_lo, start_lba_hi, device_id;
+	struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
+	union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+	struct IO_REQUEST_INFO io_info;
+	struct fusion_context *fusion;
+	struct MR_FW_RAID_MAP_ALL *local_map_ptr;
+
+	device_id = MEGASAS_DEV_INDEX(instance, scp);
+
+	fusion = instance->ctrl_context;
+
+	io_request = cmd->io_request;
+	io_request->RaidContext.VirtualDiskTgtId = device_id;
+	io_request->RaidContext.status = 0;
+	io_request->RaidContext.exStatus = 0;
+
+	req_desc = (union MEGASAS_REQUEST_DESCRIPTOR_UNION *)cmd->request_desc;
+
+	start_lba_lo = 0;
+	start_lba_hi = 0;
+	fp_possible = 0;
+
+	/*
+	 * 6-byte READ(0x08) or WRITE(0x0A) cdb
+	 */
+	if (scp->cmd_len == 6) {
+		io_request->DataLength = (u32) scp->cmnd[4];
+		start_lba_lo = ((u32) scp->cmnd[1] << 16) |
+			((u32) scp->cmnd[2] << 8) | (u32) scp->cmnd[3];
+
+		start_lba_lo &= 0x1FFFFF;
+	}
+
+	/*
+	 * 10-byte READ(0x28) or WRITE(0x2A) cdb
+	 */
+	else if (scp->cmd_len == 10) {
+		io_request->DataLength = (u32) scp->cmnd[8] |
+			((u32) scp->cmnd[7] << 8);
+		start_lba_lo = ((u32) scp->cmnd[2] << 24) |
+			((u32) scp->cmnd[3] << 16) |
+			((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+	}
+
+	/*
+	 * 12-byte READ(0xA8) or WRITE(0xAA) cdb
+	 */
+	else if (scp->cmd_len == 12) {
+		io_request->DataLength = ((u32) scp->cmnd[6] << 24) |
+			((u32) scp->cmnd[7] << 16) |
+			((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
+		start_lba_lo = ((u32) scp->cmnd[2] << 24) |
+			((u32) scp->cmnd[3] << 16) |
+			((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+	}
+
+	/*
+	 * 16-byte READ(0x88) or WRITE(0x8A) cdb
+	 */
+	else if (scp->cmd_len == 16) {
+		io_request->DataLength = ((u32) scp->cmnd[10] << 24) |
+			((u32) scp->cmnd[11] << 16) |
+			((u32) scp->cmnd[12] << 8) | (u32) scp->cmnd[13];
+		start_lba_lo = ((u32) scp->cmnd[6] << 24) |
+			((u32) scp->cmnd[7] << 16) |
+			((u32) scp->cmnd[8] << 8) | (u32) scp->cmnd[9];
+
+		start_lba_hi = ((u32) scp->cmnd[2] << 24) |
+			((u32) scp->cmnd[3] << 16) |
+			((u32) scp->cmnd[4] << 8) | (u32) scp->cmnd[5];
+	}
+
+	memset(&io_info, 0, sizeof(struct IO_REQUEST_INFO));
+	io_info.ldStartBlock = ((u64)start_lba_hi << 32) | start_lba_lo;
+	io_info.numBlocks = io_request->DataLength;
+	io_info.ldTgtId = device_id;
+
+	if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
+		io_info.isRead = 1;
+
+	local_map_ptr = fusion->ld_map[(instance->map_id & 1)];
+
+	if ((MR_TargetIdToLdGet(device_id, local_map_ptr) >=
+	     MAX_LOGICAL_DRIVES) || (!fusion->fast_path_io)) {
+		io_request->RaidContext.regLockFlags  = 0;
+		fp_possible = 0;
+	} else {
+		if (MR_BuildRaidContext(&io_info, &io_request->RaidContext,
+					local_map_ptr))
+			fp_possible = io_info.fpOkForIo;
+	}
+
+	if (fp_possible) {
+		megasas_set_pd_lba(io_request, scp->cmd_len, &io_info, scp,
+				   local_map_ptr, start_lba_lo);
+		io_request->DataLength = scsi_bufflen(scp);
+		io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
+		cmd->request_desc->SCSIIO.RequestFlags =
+			(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY
+			 << MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+		if ((fusion->load_balance_info[device_id].loadBalanceFlag) &&
+		    (io_info.isRead)) {
+			io_info.devHandle =
+				get_updated_dev_handle(
+					&fusion->load_balance_info[device_id],
+					&io_info);
+			scp->SCp.Status |= MEGASAS_LOAD_BALANCE_FLAG;
+		} else
+			scp->SCp.Status &= ~MEGASAS_LOAD_BALANCE_FLAG;
+		cmd->request_desc->SCSIIO.DevHandle = io_info.devHandle;
+		io_request->DevHandle = io_info.devHandle;
+	} else {
+		io_request->RaidContext.timeoutValue =
+			local_map_ptr->raidMap.fpPdIoTimeoutSec;
+		io_request->Function = MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
+		io_request->DevHandle = device_id;
+		cmd->request_desc->SCSIIO.RequestFlags =
+			(MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO
+			 << MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+	} /* Not FP */
+}
+
+/**
+ * megasas_build_dcdb_fusion -	Prepares IOs to devices
+ * @instance:		Adapter soft state
+ * @scp:		SCSI command
+ * @cmd:		Command to be prepared
+ *
+ * Prepares the io_request frame for non-io cmds
+ */
+static void
+megasas_build_dcdb_fusion(struct megasas_instance *instance,
+			  struct scsi_cmnd *scmd,
+			  struct megasas_cmd_fusion *cmd)
+{
+	u32 device_id;
+	struct MPI2_RAID_SCSI_IO_REQUEST *io_request;
+	u16 pd_index = 0;
+	struct MR_FW_RAID_MAP_ALL *local_map_ptr;
+	struct fusion_context *fusion = instance->ctrl_context;
+
+	io_request = cmd->io_request;
+	device_id = MEGASAS_DEV_INDEX(instance, scmd);
+	pd_index = (scmd->device->channel * MEGASAS_MAX_DEV_PER_CHANNEL)
+		+scmd->device->id;
+	local_map_ptr = fusion->ld_map[(instance->map_id & 1)];
+
+	/* Check if this is a system PD I/O */
+	if ((instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) &&
+	    (instance->pd_list[pd_index].driveType == TYPE_DISK)) {
+		io_request->Function = 0;
+		io_request->DevHandle =
+			local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
+		io_request->RaidContext.timeoutValue =
+			local_map_ptr->raidMap.fpPdIoTimeoutSec;
+		io_request->RaidContext.regLockFlags = 0;
+		io_request->RaidContext.regLockRowLBA = 0;
+		io_request->RaidContext.regLockLength = 0;
+		io_request->RaidContext.RAIDFlags =
+			MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD <<
+			MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT;
+		cmd->request_desc->SCSIIO.RequestFlags =
+			(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY <<
+			 MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+	} else {
+		io_request->Function  = MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST;
+		io_request->DevHandle = device_id;
+		cmd->request_desc->SCSIIO.RequestFlags =
+			(MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
+			 MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+	}
+	io_request->RaidContext.VirtualDiskTgtId = device_id;
+	io_request->LUN[0] = scmd->device->lun;
+	io_request->DataLength = scsi_bufflen(scmd);
+}
+
+/**
+ * megasas_build_io_fusion -	Prepares IOs to devices
+ * @instance:		Adapter soft state
+ * @scp:		SCSI command
+ * @cmd:		Command to be prepared
+ *
+ * Invokes helper functions to prepare request frames
+ * and sets flags appropriate for IO/Non-IO cmd
+ */
+int
+megasas_build_io_fusion(struct megasas_instance *instance,
+			struct scsi_cmnd *scp,
+			struct megasas_cmd_fusion *cmd)
+{
+	u32 device_id, sge_count;
+	struct MPI2_RAID_SCSI_IO_REQUEST *io_request = cmd->io_request;
+
+	device_id = MEGASAS_DEV_INDEX(instance, scp);
+
+	/* Zero out some fields so they don't get reused */
+	io_request->LUN[0] = 0;
+	io_request->CDB.EEDP32.PrimaryReferenceTag = 0;
+	io_request->CDB.EEDP32.PrimaryApplicationTagMask = 0;
+	io_request->EEDPFlags = 0;
+	io_request->Control = 0;
+	io_request->EEDPBlockSize = 0;
+	io_request->IoFlags = 0;
+	io_request->RaidContext.RAIDFlags = 0;
+
+	memcpy(io_request->CDB.CDB32, scp->cmnd, scp->cmd_len);
+	/*
+	 * Just the CDB length,rest of the Flags are zero
+	 * This will be modified for FP in build_ldio_fusion
+	 */
+	io_request->IoFlags = scp->cmd_len;
+
+	if (megasas_is_ldio(scp))
+		megasas_build_ldio_fusion(instance, scp, cmd);
+	else
+		megasas_build_dcdb_fusion(instance, scp, cmd);
+
+	/*
+	 * Construct SGL
+	 */
+
+	sge_count =
+		megasas_make_sgl_fusion(instance, scp,
+					(struct MPI25_IEEE_SGE_CHAIN64 *)
+					&io_request->SGL, cmd);
+
+	if (sge_count > instance->max_num_sge) {
+		printk(KERN_ERR "megasas: Error. sge_count (0x%x) exceeds "
+		       "max (0x%x) allowed\n", sge_count,
+		       instance->max_num_sge);
+		return 1;
+	}
+
+	io_request->RaidContext.numSGE = sge_count;
+
+	io_request->SGLFlags = MPI2_SGE_FLAGS_64_BIT_ADDRESSING;
+
+	if (scp->sc_data_direction == PCI_DMA_TODEVICE)
+		io_request->Control |= MPI2_SCSIIO_CONTROL_WRITE;
+	else if (scp->sc_data_direction == PCI_DMA_FROMDEVICE)
+		io_request->Control |= MPI2_SCSIIO_CONTROL_READ;
+
+	io_request->SGLOffset0 =
+		offsetof(struct MPI2_RAID_SCSI_IO_REQUEST, SGL) / 4;
+
+	io_request->SenseBufferLowAddress = cmd->sense_phys_addr;
+	io_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
+
+	cmd->scmd = scp;
+	scp->SCp.ptr = (char *)cmd;
+
+	return 0;
+}
+
+union MEGASAS_REQUEST_DESCRIPTOR_UNION *
+megasas_get_request_descriptor(struct megasas_instance *instance, u16 index)
+{
+	u8 *p;
+	struct fusion_context *fusion;
+
+	if (index >= instance->max_fw_cmds) {
+		printk(KERN_ERR "megasas: Invalid SMID (0x%x)request for "
+		       "descriptor\n", index);
+		return NULL;
+	}
+	fusion = instance->ctrl_context;
+	p = fusion->req_frames_desc
+		+sizeof(union MEGASAS_REQUEST_DESCRIPTOR_UNION) *index;
+
+	return (union MEGASAS_REQUEST_DESCRIPTOR_UNION *)p;
+}
+
+/**
+ * megasas_build_and_issue_cmd_fusion -Main routine for building and
+ *                                     issuing non IOCTL cmd
+ * @instance:			Adapter soft state
+ * @scmd:			pointer to scsi cmd from OS
+ */
+static u32
+megasas_build_and_issue_cmd_fusion(struct megasas_instance *instance,
+				   struct scsi_cmnd *scmd)
+{
+	struct megasas_cmd_fusion *cmd;
+	union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+	u32 index;
+	struct fusion_context *fusion;
+
+	fusion = instance->ctrl_context;
+
+	cmd = megasas_get_cmd_fusion(instance);
+	if (!cmd)
+		return SCSI_MLQUEUE_HOST_BUSY;
+
+	index = cmd->index;
+
+	req_desc = megasas_get_request_descriptor(instance, index-1);
+	if (!req_desc)
+		return 1;
+
+	req_desc->Words = 0;
+	cmd->request_desc = req_desc;
+	cmd->request_desc->Words = 0;
+
+	if (megasas_build_io_fusion(instance, scmd, cmd)) {
+		megasas_return_cmd_fusion(instance, cmd);
+		printk(KERN_ERR "megasas: Error building command.\n");
+		cmd->request_desc = NULL;
+		return 1;
+	}
+
+	req_desc = cmd->request_desc;
+	req_desc->SCSIIO.SMID = index;
+
+	if (cmd->io_request->ChainOffset != 0 &&
+	    cmd->io_request->ChainOffset != 0xF)
+		printk(KERN_ERR "megasas: The chain offset value is not "
+		       "correct : %x\n", cmd->io_request->ChainOffset);
+
+	/*
+	 * Issue the command to the FW
+	 */
+	atomic_inc(&instance->fw_outstanding);
+
+	instance->instancet->fire_cmd(instance,
+				      req_desc->u.low, req_desc->u.high,
+				      instance->reg_set);
+
+	return 0;
+}
+
+/**
+ * complete_cmd_fusion -	Completes command
+ * @instance:			Adapter soft state
+ * Completes all commands that is in reply descriptor queue
+ */
+int
+complete_cmd_fusion(struct megasas_instance *instance)
+{
+	union MPI2_REPLY_DESCRIPTORS_UNION *desc;
+	struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *reply_desc;
+	struct MPI2_RAID_SCSI_IO_REQUEST *scsi_io_req;
+	struct fusion_context *fusion;
+	struct megasas_cmd *cmd_mfi;
+	struct megasas_cmd_fusion *cmd_fusion;
+	u16 smid, num_completed;
+	u8 reply_descript_type, arm;
+	u32 status, extStatus, device_id;
+	union desc_value d_val;
+	struct LD_LOAD_BALANCE_INFO *lbinfo;
+
+	fusion = instance->ctrl_context;
+
+	if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR)
+		return IRQ_HANDLED;
+
+	desc = fusion->reply_frames_desc;
+	desc += fusion->last_reply_idx;
+
+	reply_desc = (struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *)desc;
+
+	d_val.word = desc->Words;
+
+	reply_descript_type = reply_desc->ReplyFlags &
+		MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+
+	if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
+		return IRQ_NONE;
+
+	d_val.word = desc->Words;
+
+	num_completed = 0;
+
+	while ((d_val.u.low != UINT_MAX) && (d_val.u.high != UINT_MAX)) {
+		smid = reply_desc->SMID;
+
+		cmd_fusion = fusion->cmd_list[smid - 1];
+
+		scsi_io_req =
+			(struct MPI2_RAID_SCSI_IO_REQUEST *)
+		  cmd_fusion->io_request;
+
+		if (cmd_fusion->scmd)
+			cmd_fusion->scmd->SCp.ptr = NULL;
+
+		status = scsi_io_req->RaidContext.status;
+		extStatus = scsi_io_req->RaidContext.exStatus;
+
+		switch (scsi_io_req->Function) {
+		case MPI2_FUNCTION_SCSI_IO_REQUEST:  /*Fast Path IO.*/
+			/* Update load balancing info */
+			device_id = MEGASAS_DEV_INDEX(instance,
+						      cmd_fusion->scmd);
+			lbinfo = &fusion->load_balance_info[device_id];
+			if (cmd_fusion->scmd->SCp.Status &
+			    MEGASAS_LOAD_BALANCE_FLAG) {
+				arm = lbinfo->raid1DevHandle[0] ==
+					cmd_fusion->io_request->DevHandle ? 0 :
+					1;
+				atomic_dec(&lbinfo->scsi_pending_cmds[arm]);
+				cmd_fusion->scmd->SCp.Status &=
+					~MEGASAS_LOAD_BALANCE_FLAG;
+			}
+			if (reply_descript_type ==
+			    MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS) {
+				if (megasas_dbg_lvl == 5)
+					printk(KERN_ERR "\nmegasas: FAST Path "
+					       "IO Success\n");
+			}
+			/* Fall thru and complete IO */
+		case MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST: /* LD-IO Path */
+			/* Map the FW Cmd Status */
+			map_cmd_status(cmd_fusion, status, extStatus);
+			scsi_dma_unmap(cmd_fusion->scmd);
+			cmd_fusion->scmd->scsi_done(cmd_fusion->scmd);
+			scsi_io_req->RaidContext.status = 0;
+			scsi_io_req->RaidContext.exStatus = 0;
+			megasas_return_cmd_fusion(instance, cmd_fusion);
+			atomic_dec(&instance->fw_outstanding);
+
+			break;
+		case MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST: /*MFI command */
+			cmd_mfi = instance->cmd_list[cmd_fusion->sync_cmd_idx];
+			megasas_complete_cmd(instance, cmd_mfi, DID_OK);
+			cmd_fusion->flags = 0;
+			megasas_return_cmd_fusion(instance, cmd_fusion);
+
+			break;
+		}
+
+		fusion->last_reply_idx++;
+		if (fusion->last_reply_idx >= fusion->reply_q_depth)
+			fusion->last_reply_idx = 0;
+
+		desc->Words = ULLONG_MAX;
+		num_completed++;
+
+		/* Get the next reply descriptor */
+		if (!fusion->last_reply_idx)
+			desc = fusion->reply_frames_desc;
+		else
+			desc++;
+
+		reply_desc =
+		  (struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *)desc;
+
+		d_val.word = desc->Words;
+
+		reply_descript_type = reply_desc->ReplyFlags &
+			MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
+
+		if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
+			break;
+	}
+
+	if (!num_completed)
+		return IRQ_NONE;
+
+	wmb();
+	writel(fusion->last_reply_idx,
+	       &instance->reg_set->reply_post_host_index);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * megasas_complete_cmd_dpc_fusion -	Completes command
+ * @instance:			Adapter soft state
+ *
+ * Tasklet to complete cmds
+ */
+void
+megasas_complete_cmd_dpc_fusion(unsigned long instance_addr)
+{
+	struct megasas_instance *instance =
+		(struct megasas_instance *)instance_addr;
+	unsigned long flags;
+
+	/* If we have already declared adapter dead, donot complete cmds */
+	spin_lock_irqsave(&instance->hba_lock, flags);
+	if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
+		spin_unlock_irqrestore(&instance->hba_lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&instance->hba_lock, flags);
+
+	spin_lock_irqsave(&instance->completion_lock, flags);
+	complete_cmd_fusion(instance);
+	spin_unlock_irqrestore(&instance->completion_lock, flags);
+}
+
+/**
+ * megasas_isr_fusion - isr entry point
+ */
+irqreturn_t megasas_isr_fusion(int irq, void *devp)
+{
+	struct megasas_instance *instance = (struct megasas_instance *)devp;
+	u32 mfiStatus, fw_state;
+
+	if (!instance->msi_flag) {
+		mfiStatus = instance->instancet->clear_intr(instance->reg_set);
+		if (!mfiStatus)
+			return IRQ_NONE;
+	}
+
+	/* If we are resetting, bail */
+	if (test_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags))
+		return IRQ_HANDLED;
+
+	if (!complete_cmd_fusion(instance)) {
+		/* If we didn't complete any commands, check for FW fault */
+		fw_state = instance->instancet->read_fw_status_reg(
+			instance->reg_set) & MFI_STATE_MASK;
+		if (fw_state == MFI_STATE_FAULT)
+			schedule_work(&instance->work_init);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * build_mpt_mfi_pass_thru - builds a cmd fo MFI Pass thru
+ * @instance:			Adapter soft state
+ * mfi_cmd:			megasas_cmd pointer
+ *
+ */
+u8
+build_mpt_mfi_pass_thru(struct megasas_instance *instance,
+			struct megasas_cmd *mfi_cmd)
+{
+	struct MPI25_IEEE_SGE_CHAIN64 *mpi25_ieee_chain;
+	struct MPI2_RAID_SCSI_IO_REQUEST *io_req;
+	struct megasas_cmd_fusion *cmd;
+	struct fusion_context *fusion;
+	struct megasas_header *frame_hdr = &mfi_cmd->frame->hdr;
+
+	cmd = megasas_get_cmd_fusion(instance);
+	if (!cmd)
+		return 1;
+
+	/*  Save the smid. To be used for returning the cmd */
+	mfi_cmd->context.smid = cmd->index;
+
+	cmd->sync_cmd_idx = mfi_cmd->index;
+
+	/*
+	 * For cmds where the flag is set, store the flag and check
+	 * on completion. For cmds with this flag, don't call
+	 * megasas_complete_cmd
+	 */
+
+	if (frame_hdr->flags & MFI_FRAME_DONT_POST_IN_REPLY_QUEUE)
+		cmd->flags = MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
+
+	fusion = instance->ctrl_context;
+	io_req = cmd->io_request;
+	mpi25_ieee_chain =
+	  (struct MPI25_IEEE_SGE_CHAIN64 *)&io_req->SGL.IeeeChain;
+
+	io_req->Function    = MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST;
+	io_req->SGLOffset0  = offsetof(struct MPI2_RAID_SCSI_IO_REQUEST,
+				       SGL) / 4;
+	io_req->ChainOffset = fusion->chain_offset_mfi_pthru;
+
+	mpi25_ieee_chain->Address = mfi_cmd->frame_phys_addr;
+
+	mpi25_ieee_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT |
+		MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR;
+
+	mpi25_ieee_chain->Length = MEGASAS_MAX_SZ_CHAIN_FRAME;
+
+	return 0;
+}
+
+/**
+ * build_mpt_cmd - Calls helper function to build a cmd MFI Pass thru cmd
+ * @instance:			Adapter soft state
+ * @cmd:			mfi cmd to build
+ *
+ */
+union MEGASAS_REQUEST_DESCRIPTOR_UNION *
+build_mpt_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd)
+{
+	union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+	u16 index;
+
+	if (build_mpt_mfi_pass_thru(instance, cmd)) {
+		printk(KERN_ERR "Couldn't build MFI pass thru cmd\n");
+		return NULL;
+	}
+
+	index = cmd->context.smid;
+
+	req_desc = megasas_get_request_descriptor(instance, index - 1);
+
+	if (!req_desc)
+		return NULL;
+
+	req_desc->Words = 0;
+	req_desc->SCSIIO.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
+					 MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
+
+	req_desc->SCSIIO.SMID = index;
+
+	return req_desc;
+}
+
+/**
+ * megasas_issue_dcmd_fusion - Issues a MFI Pass thru cmd
+ * @instance:			Adapter soft state
+ * @cmd:			mfi cmd pointer
+ *
+ */
+void
+megasas_issue_dcmd_fusion(struct megasas_instance *instance,
+			  struct megasas_cmd *cmd)
+{
+	union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+	union desc_value d_val;
+
+	req_desc = build_mpt_cmd(instance, cmd);
+	if (!req_desc) {
+		printk(KERN_ERR "Couldn't issue MFI pass thru cmd\n");
+		return;
+	}
+	d_val.word = req_desc->Words;
+
+	instance->instancet->fire_cmd(instance, req_desc->u.low,
+				      req_desc->u.high, instance->reg_set);
+}
+
+/**
+ * megasas_release_fusion -	Reverses the FW initialization
+ * @intance:			Adapter soft state
+ */
+void
+megasas_release_fusion(struct megasas_instance *instance)
+{
+	megasas_free_cmds(instance);
+	megasas_free_cmds_fusion(instance);
+
+	iounmap(instance->reg_set);
+
+	pci_release_selected_regions(instance->pdev, instance->bar);
+}
+
+/**
+ * megasas_read_fw_status_reg_fusion - returns the current FW status value
+ * @regs:			MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_fusion(struct megasas_register_set __iomem *regs)
+{
+	return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_adp_reset_fusion -	For controller reset
+ * @regs:				MFI register set
+ */
+static int
+megasas_adp_reset_fusion(struct megasas_instance *instance,
+			 struct megasas_register_set __iomem *regs)
+{
+	return 0;
+}
+
+/**
+ * megasas_check_reset_fusion -	For controller reset check
+ * @regs:				MFI register set
+ */
+static int
+megasas_check_reset_fusion(struct megasas_instance *instance,
+			   struct megasas_register_set __iomem *regs)
+{
+	return 0;
+}
+
+/* This function waits for outstanding commands on fusion to complete */
+int megasas_wait_for_outstanding_fusion(struct megasas_instance *instance)
+{
+	int i, outstanding, retval = 0;
+	u32 fw_state, wait_time = MEGASAS_RESET_WAIT_TIME;
+
+	for (i = 0; i < wait_time; i++) {
+		/* Check if firmware is in fault state */
+		fw_state = instance->instancet->read_fw_status_reg(
+			instance->reg_set) & MFI_STATE_MASK;
+		if (fw_state == MFI_STATE_FAULT) {
+			printk(KERN_WARNING "megasas: Found FW in FAULT state,"
+			       " will reset adapter.\n");
+			retval = 1;
+			goto out;
+		}
+
+		outstanding = atomic_read(&instance->fw_outstanding);
+		if (!outstanding)
+			goto out;
+
+		if (!(i % MEGASAS_RESET_NOTICE_INTERVAL)) {
+			printk(KERN_NOTICE "megasas: [%2d]waiting for %d "
+			       "commands to complete\n", i, outstanding);
+			megasas_complete_cmd_dpc_fusion(
+				(unsigned long)instance);
+		}
+		msleep(1000);
+	}
+
+	if (atomic_read(&instance->fw_outstanding)) {
+		printk("megaraid_sas: pending commands remain after waiting, "
+		       "will reset adapter.\n");
+		retval = 1;
+	}
+out:
+	return retval;
+}
+
+void  megasas_reset_reply_desc(struct megasas_instance *instance)
+{
+	int i;
+	struct fusion_context *fusion;
+	union MPI2_REPLY_DESCRIPTORS_UNION *reply_desc;
+
+	fusion = instance->ctrl_context;
+	fusion->last_reply_idx = 0;
+	reply_desc = fusion->reply_frames_desc;
+	for (i = 0 ; i < fusion->reply_q_depth; i++, reply_desc++)
+		reply_desc->Words = ULLONG_MAX;
+}
+
+/* Core fusion reset function */
+int megasas_reset_fusion(struct Scsi_Host *shost)
+{
+	int retval = SUCCESS, i, j, retry = 0;
+	struct megasas_instance *instance;
+	struct megasas_cmd_fusion *cmd_fusion;
+	struct fusion_context *fusion;
+	struct megasas_cmd *cmd_mfi;
+	union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc;
+	u32 host_diag, abs_state;
+
+	instance = (struct megasas_instance *)shost->hostdata;
+	fusion = instance->ctrl_context;
+
+	mutex_lock(&instance->reset_mutex);
+	set_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
+	instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT;
+	instance->instancet->disable_intr(instance->reg_set);
+	msleep(1000);
+
+	if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) {
+		printk(KERN_WARNING "megaraid_sas: Hardware critical error, "
+		       "returning FAILED.\n");
+		retval = FAILED;
+		goto out;
+	}
+
+	/* First try waiting for commands to complete */
+	if (megasas_wait_for_outstanding_fusion(instance)) {
+		printk(KERN_WARNING "megaraid_sas: resetting fusion "
+		       "adapter.\n");
+		/* Now return commands back to the OS */
+		for (i = 0 ; i < instance->max_fw_cmds; i++) {
+			cmd_fusion = fusion->cmd_list[i];
+			if (cmd_fusion->scmd) {
+				scsi_dma_unmap(cmd_fusion->scmd);
+				cmd_fusion->scmd->result = (DID_RESET << 16);
+				cmd_fusion->scmd->scsi_done(cmd_fusion->scmd);
+				megasas_return_cmd_fusion(instance, cmd_fusion);
+				atomic_dec(&instance->fw_outstanding);
+			}
+		}
+
+		if (instance->disableOnlineCtrlReset == 1) {
+			/* Reset not supported, kill adapter */
+			printk(KERN_WARNING "megaraid_sas: Reset not supported"
+			       ", killing adapter.\n");
+			megaraid_sas_kill_hba(instance);
+			instance->adprecovery = MEGASAS_HW_CRITICAL_ERROR;
+			retval = FAILED;
+			goto out;
+		}
+
+		/* Now try to reset the chip */
+		for (i = 0; i < MEGASAS_FUSION_MAX_RESET_TRIES; i++) {
+			writel(MPI2_WRSEQ_FLUSH_KEY_VALUE,
+			       &instance->reg_set->fusion_seq_offset);
+			writel(MPI2_WRSEQ_1ST_KEY_VALUE,
+			       &instance->reg_set->fusion_seq_offset);
+			writel(MPI2_WRSEQ_2ND_KEY_VALUE,
+			       &instance->reg_set->fusion_seq_offset);
+			writel(MPI2_WRSEQ_3RD_KEY_VALUE,
+			       &instance->reg_set->fusion_seq_offset);
+			writel(MPI2_WRSEQ_4TH_KEY_VALUE,
+			       &instance->reg_set->fusion_seq_offset);
+			writel(MPI2_WRSEQ_5TH_KEY_VALUE,
+			       &instance->reg_set->fusion_seq_offset);
+			writel(MPI2_WRSEQ_6TH_KEY_VALUE,
+			       &instance->reg_set->fusion_seq_offset);
+
+			/* Check that the diag write enable (DRWE) bit is on */
+			host_diag = readl(&instance->reg_set->fusion_host_diag);
+			while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) {
+				msleep(100);
+				host_diag =
+				readl(&instance->reg_set->fusion_host_diag);
+				if (retry++ == 100) {
+					printk(KERN_WARNING "megaraid_sas: "
+					       "Host diag unlock failed!\n");
+					break;
+				}
+			}
+			if (!(host_diag & HOST_DIAG_WRITE_ENABLE))
+				continue;
+
+			/* Send chip reset command */
+			writel(host_diag | HOST_DIAG_RESET_ADAPTER,
+			       &instance->reg_set->fusion_host_diag);
+			msleep(3000);
+
+			/* Make sure reset adapter bit is cleared */
+			host_diag = readl(&instance->reg_set->fusion_host_diag);
+			retry = 0;
+			while (host_diag & HOST_DIAG_RESET_ADAPTER) {
+				msleep(100);
+				host_diag =
+				readl(&instance->reg_set->fusion_host_diag);
+				if (retry++ == 1000) {
+					printk(KERN_WARNING "megaraid_sas: "
+					       "Diag reset adapter never "
+					       "cleared!\n");
+					break;
+				}
+			}
+			if (host_diag & HOST_DIAG_RESET_ADAPTER)
+				continue;
+
+			abs_state =
+				instance->instancet->read_fw_status_reg(
+					instance->reg_set);
+			retry = 0;
+
+			while ((abs_state <= MFI_STATE_FW_INIT) &&
+			       (retry++ < 1000)) {
+				msleep(100);
+				abs_state =
+				instance->instancet->read_fw_status_reg(
+					instance->reg_set);
+			}
+			if (abs_state <= MFI_STATE_FW_INIT) {
+				printk(KERN_WARNING "megaraid_sas: firmware "
+				       "state < MFI_STATE_FW_INIT, state = "
+				       "0x%x\n", abs_state);
+				continue;
+			}
+
+			/* Wait for FW to become ready */
+			if (megasas_transition_to_ready(instance)) {
+				printk(KERN_WARNING "megaraid_sas: Failed to "
+				       "transition controller to ready.\n");
+				continue;
+			}
+
+			megasas_reset_reply_desc(instance);
+			if (megasas_ioc_init_fusion(instance)) {
+				printk(KERN_WARNING "megaraid_sas: "
+				       "megasas_ioc_init_fusion() failed!\n");
+				continue;
+			}
+
+			instance->instancet->enable_intr(instance->reg_set);
+			instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
+
+			/* Re-fire management commands */
+			for (j = 0 ; j < instance->max_fw_cmds; j++) {
+				cmd_fusion = fusion->cmd_list[j];
+				if (cmd_fusion->sync_cmd_idx !=
+				    (u32)ULONG_MAX) {
+					cmd_mfi =
+					instance->
+					cmd_list[cmd_fusion->sync_cmd_idx];
+					if (cmd_mfi->frame->dcmd.opcode ==
+					    MR_DCMD_LD_MAP_GET_INFO) {
+						megasas_return_cmd(instance,
+								   cmd_mfi);
+						megasas_return_cmd_fusion(
+							instance, cmd_fusion);
+					} else  {
+						req_desc =
+						megasas_get_request_descriptor(
+							instance,
+							cmd_mfi->context.smid
+							-1);
+						if (!req_desc)
+							printk(KERN_WARNING
+							       "req_desc NULL"
+							       "\n");
+						else {
+							instance->instancet->
+							fire_cmd(instance,
+								 req_desc->
+								 u.low,
+								 req_desc->
+								 u.high,
+								 instance->
+								 reg_set);
+						}
+					}
+				}
+			}
+
+			/* Reset load balance info */
+			memset(fusion->load_balance_info, 0,
+			       sizeof(struct LD_LOAD_BALANCE_INFO)
+			       *MAX_LOGICAL_DRIVES);
+
+			if (!megasas_get_map_info(instance))
+				megasas_sync_map_info(instance);
+
+			/* Adapter reset completed successfully */
+			printk(KERN_WARNING "megaraid_sas: Reset "
+			       "successful.\n");
+			retval = SUCCESS;
+			goto out;
+		}
+		/* Reset failed, kill the adapter */
+		printk(KERN_WARNING "megaraid_sas: Reset failed, killing "
+		       "adapter.\n");
+		megaraid_sas_kill_hba(instance);
+		retval = FAILED;
+	} else {
+		instance->instancet->enable_intr(instance->reg_set);
+		instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
+	}
+out:
+	clear_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags);
+	mutex_unlock(&instance->reset_mutex);
+	return retval;
+}
+
+/* Fusion OCR work queue */
+void megasas_fusion_ocr_wq(struct work_struct *work)
+{
+	struct megasas_instance *instance =
+		container_of(work, struct megasas_instance, work_init);
+
+	megasas_reset_fusion(instance->host);
+}
+
+struct megasas_instance_template megasas_instance_template_fusion = {
+	.fire_cmd = megasas_fire_cmd_fusion,
+	.enable_intr = megasas_enable_intr_fusion,
+	.disable_intr = megasas_disable_intr_fusion,
+	.clear_intr = megasas_clear_intr_fusion,
+	.read_fw_status_reg = megasas_read_fw_status_reg_fusion,
+	.adp_reset = megasas_adp_reset_fusion,
+	.check_reset = megasas_check_reset_fusion,
+	.service_isr = megasas_isr_fusion,
+	.tasklet = megasas_complete_cmd_dpc_fusion,
+	.init_adapter = megasas_init_adapter_fusion,
+	.build_and_issue_cmd = megasas_build_and_issue_cmd_fusion,
+	.issue_dcmd = megasas_issue_dcmd_fusion,
+};
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h
new file mode 100644
index 00000000000..82b577a72c8
--- /dev/null
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -0,0 +1,695 @@
+/*
+ *  Linux MegaRAID driver for SAS based RAID controllers
+ *
+ *  Copyright (c) 2009-2011  LSI Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *  FILE: megaraid_sas_fusion.h
+ *
+ *  Authors: LSI Corporation
+ *           Manoj Jose
+ *           Sumant Patro
+ *
+ *  Send feedback to: <megaraidlinux@lsi.com>
+ *
+ *  Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
+ *     ATTN: Linuxraid
+ */
+
+#ifndef _MEGARAID_SAS_FUSION_H_
+#define _MEGARAID_SAS_FUSION_H_
+
+/* Fusion defines */
+#define MEGASAS_MAX_SZ_CHAIN_FRAME 1024
+#define MFI_FUSION_ENABLE_INTERRUPT_MASK (0x00000009)
+#define MEGA_MPI2_RAID_DEFAULT_IO_FRAME_SIZE 256
+#define MEGASAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST   0xF0
+#define MEGASAS_MPI2_FUNCTION_LD_IO_REQUEST         0xF1
+#define MEGASAS_LOAD_BALANCE_FLAG		    0x1
+#define MEGASAS_DCMD_MBOX_PEND_FLAG		    0x1
+#define HOST_DIAG_WRITE_ENABLE			    0x80
+#define HOST_DIAG_RESET_ADAPTER			    0x4
+#define MEGASAS_FUSION_MAX_RESET_TRIES		    3
+
+/* T10 PI defines */
+#define MR_PROT_INFO_TYPE_CONTROLLER                0x8
+#define MEGASAS_SCSI_VARIABLE_LENGTH_CMD            0x7f
+#define MEGASAS_SCSI_SERVICE_ACTION_READ32          0x9
+#define MEGASAS_SCSI_SERVICE_ACTION_WRITE32         0xB
+#define MEGASAS_SCSI_ADDL_CDB_LEN                   0x18
+#define MEGASAS_RD_WR_PROTECT_CHECK_ALL		    0x20
+#define MEGASAS_RD_WR_PROTECT_CHECK_NONE	    0x60
+#define MEGASAS_EEDPBLOCKSIZE			    512
+
+/*
+ * Raid context flags
+ */
+
+#define MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT   0x4
+#define MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_MASK    0x30
+enum MR_RAID_FLAGS_IO_SUB_TYPE {
+	MR_RAID_FLAGS_IO_SUB_TYPE_NONE = 0,
+	MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD = 1,
+};
+
+/*
+ * Request descriptor types
+ */
+#define MEGASAS_REQ_DESCRIPT_FLAGS_LD_IO           0x7
+#define MEGASAS_REQ_DESCRIPT_FLAGS_MFA             0x1
+
+#define MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT      1
+
+#define MEGASAS_FP_CMD_LEN	16
+#define MEGASAS_FUSION_IN_RESET 0
+
+/*
+ * Raid Context structure which describes MegaRAID specific IO Paramenters
+ * This resides at offset 0x60 where the SGL normally starts in MPT IO Frames
+ */
+
+struct RAID_CONTEXT {
+	u16     resvd0;
+	u16     timeoutValue;
+	u8      regLockFlags;
+	u8      resvd1;
+	u16     VirtualDiskTgtId;
+	u64     regLockRowLBA;
+	u32     regLockLength;
+	u16     nextLMId;
+	u8      exStatus;
+	u8      status;
+	u8      RAIDFlags;
+	u8      numSGE;
+	u16	configSeqNum;
+	u8      spanArm;
+	u8      resvd2[3];
+};
+
+#define RAID_CTX_SPANARM_ARM_SHIFT	(0)
+#define RAID_CTX_SPANARM_ARM_MASK	(0x1f)
+
+#define RAID_CTX_SPANARM_SPAN_SHIFT	(5)
+#define RAID_CTX_SPANARM_SPAN_MASK	(0xE0)
+
+/*
+ * define region lock types
+ */
+enum REGION_TYPE {
+	REGION_TYPE_UNUSED       = 0,
+	REGION_TYPE_SHARED_READ  = 1,
+	REGION_TYPE_SHARED_WRITE = 2,
+	REGION_TYPE_EXCLUSIVE    = 3,
+};
+
+/* MPI2 defines */
+#define MPI2_FUNCTION_IOC_INIT              (0x02) /* IOC Init */
+#define MPI2_WHOINIT_HOST_DRIVER            (0x04)
+#define MPI2_VERSION_MAJOR                  (0x02)
+#define MPI2_VERSION_MINOR                  (0x00)
+#define MPI2_VERSION_MAJOR_MASK             (0xFF00)
+#define MPI2_VERSION_MAJOR_SHIFT            (8)
+#define MPI2_VERSION_MINOR_MASK             (0x00FF)
+#define MPI2_VERSION_MINOR_SHIFT            (0)
+#define MPI2_VERSION ((MPI2_VERSION_MAJOR << MPI2_VERSION_MAJOR_SHIFT) | \
+		      MPI2_VERSION_MINOR)
+#define MPI2_HEADER_VERSION_UNIT            (0x10)
+#define MPI2_HEADER_VERSION_DEV             (0x00)
+#define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
+#define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
+#define MPI2_HEADER_VERSION_DEV_MASK        (0x00FF)
+#define MPI2_HEADER_VERSION_DEV_SHIFT       (0)
+#define MPI2_HEADER_VERSION ((MPI2_HEADER_VERSION_UNIT << 8) | \
+			     MPI2_HEADER_VERSION_DEV)
+#define MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR      (0x03)
+#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG        (0x8000)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG          (0x0400)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP       (0x0003)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG          (0x0200)
+#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD           (0x0100)
+#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP             (0x0004)
+#define MPI2_FUNCTION_SCSI_IO_REQUEST               (0x00) /* SCSI IO */
+#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY           (0x06)
+#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO                 (0x00)
+#define MPI2_SGE_FLAGS_64_BIT_ADDRESSING        (0x02)
+#define MPI2_SCSIIO_CONTROL_WRITE               (0x01000000)
+#define MPI2_SCSIIO_CONTROL_READ                (0x02000000)
+#define MPI2_REQ_DESCRIPT_FLAGS_TYPE_MASK       (0x0E)
+#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED          (0x0F)
+#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
+#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK       (0x0F)
+#define MPI2_WRSEQ_FLUSH_KEY_VALUE              (0x0)
+#define MPI2_WRITE_SEQUENCE_OFFSET              (0x00000004)
+#define MPI2_WRSEQ_1ST_KEY_VALUE                (0xF)
+#define MPI2_WRSEQ_2ND_KEY_VALUE                (0x4)
+#define MPI2_WRSEQ_3RD_KEY_VALUE                (0xB)
+#define MPI2_WRSEQ_4TH_KEY_VALUE                (0x2)
+#define MPI2_WRSEQ_5TH_KEY_VALUE                (0x7)
+#define MPI2_WRSEQ_6TH_KEY_VALUE                (0xD)
+
+struct MPI25_IEEE_SGE_CHAIN64 {
+	u64                     Address;
+	u32                     Length;
+	u16                     Reserved1;
+	u8                      NextChainOffset;
+	u8                      Flags;
+};
+
+struct MPI2_SGE_SIMPLE_UNION {
+	u32                     FlagsLength;
+	union {
+		u32                 Address32;
+		u64                 Address64;
+	} u;
+};
+
+struct MPI2_SCSI_IO_CDB_EEDP32 {
+	u8                      CDB[20];                    /* 0x00 */
+	u32                     PrimaryReferenceTag;        /* 0x14 */
+	u16                     PrimaryApplicationTag;      /* 0x18 */
+	u16                     PrimaryApplicationTagMask;  /* 0x1A */
+	u32                     TransferLength;             /* 0x1C */
+};
+
+struct MPI2_SGE_CHAIN_UNION {
+	u16                     Length;
+	u8                      NextChainOffset;
+	u8                      Flags;
+	union {
+		u32                 Address32;
+		u64                 Address64;
+	} u;
+};
+
+struct MPI2_IEEE_SGE_SIMPLE32 {
+	u32                     Address;
+	u32                     FlagsLength;
+};
+
+struct MPI2_IEEE_SGE_CHAIN32 {
+	u32                     Address;
+	u32                     FlagsLength;
+};
+
+struct MPI2_IEEE_SGE_SIMPLE64 {
+	u64                     Address;
+	u32                     Length;
+	u16                     Reserved1;
+	u8                      Reserved2;
+	u8                      Flags;
+};
+
+struct MPI2_IEEE_SGE_CHAIN64 {
+	u64                     Address;
+	u32                     Length;
+	u16                     Reserved1;
+	u8                      Reserved2;
+	u8                      Flags;
+};
+
+union MPI2_IEEE_SGE_SIMPLE_UNION {
+	struct MPI2_IEEE_SGE_SIMPLE32  Simple32;
+	struct MPI2_IEEE_SGE_SIMPLE64  Simple64;
+};
+
+union MPI2_IEEE_SGE_CHAIN_UNION {
+	struct MPI2_IEEE_SGE_CHAIN32   Chain32;
+	struct MPI2_IEEE_SGE_CHAIN64   Chain64;
+};
+
+union MPI2_SGE_IO_UNION {
+	struct MPI2_SGE_SIMPLE_UNION       MpiSimple;
+	struct MPI2_SGE_CHAIN_UNION        MpiChain;
+	union MPI2_IEEE_SGE_SIMPLE_UNION  IeeeSimple;
+	union MPI2_IEEE_SGE_CHAIN_UNION   IeeeChain;
+};
+
+union MPI2_SCSI_IO_CDB_UNION {
+	u8                      CDB32[32];
+	struct MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
+	struct MPI2_SGE_SIMPLE_UNION SGE;
+};
+
+/*
+ * RAID SCSI IO Request Message
+ * Total SGE count will be one less than  _MPI2_SCSI_IO_REQUEST
+ */
+struct MPI2_RAID_SCSI_IO_REQUEST {
+	u16                     DevHandle;                      /* 0x00 */
+	u8                      ChainOffset;                    /* 0x02 */
+	u8                      Function;                       /* 0x03 */
+	u16                     Reserved1;                      /* 0x04 */
+	u8                      Reserved2;                      /* 0x06 */
+	u8                      MsgFlags;                       /* 0x07 */
+	u8                      VP_ID;                          /* 0x08 */
+	u8                      VF_ID;                          /* 0x09 */
+	u16                     Reserved3;                      /* 0x0A */
+	u32                     SenseBufferLowAddress;          /* 0x0C */
+	u16                     SGLFlags;                       /* 0x10 */
+	u8                      SenseBufferLength;              /* 0x12 */
+	u8                      Reserved4;                      /* 0x13 */
+	u8                      SGLOffset0;                     /* 0x14 */
+	u8                      SGLOffset1;                     /* 0x15 */
+	u8                      SGLOffset2;                     /* 0x16 */
+	u8                      SGLOffset3;                     /* 0x17 */
+	u32                     SkipCount;                      /* 0x18 */
+	u32                     DataLength;                     /* 0x1C */
+	u32                     BidirectionalDataLength;        /* 0x20 */
+	u16                     IoFlags;                        /* 0x24 */
+	u16                     EEDPFlags;                      /* 0x26 */
+	u32                     EEDPBlockSize;                  /* 0x28 */
+	u32                     SecondaryReferenceTag;          /* 0x2C */
+	u16                     SecondaryApplicationTag;        /* 0x30 */
+	u16                     ApplicationTagTranslationMask;  /* 0x32 */
+	u8                      LUN[8];                         /* 0x34 */
+	u32                     Control;                        /* 0x3C */
+	union MPI2_SCSI_IO_CDB_UNION  CDB;			/* 0x40 */
+	struct RAID_CONTEXT	RaidContext;                    /* 0x60 */
+	union MPI2_SGE_IO_UNION       SGL;			/* 0x80 */
+};
+
+/*
+ * MPT RAID MFA IO Descriptor.
+ */
+struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR {
+	u32     RequestFlags:8;
+	u32     MessageAddress1:24; /* bits 31:8*/
+	u32     MessageAddress2;      /* bits 61:32 */
+};
+
+/* Default Request Descriptor */
+struct MPI2_DEFAULT_REQUEST_DESCRIPTOR {
+	u8              RequestFlags;               /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u16             SMID;                       /* 0x02 */
+	u16             LMID;                       /* 0x04 */
+	u16             DescriptorTypeDependent;    /* 0x06 */
+};
+
+/* High Priority Request Descriptor */
+struct MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR {
+	u8              RequestFlags;               /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u16             SMID;                       /* 0x02 */
+	u16             LMID;                       /* 0x04 */
+	u16             Reserved1;                  /* 0x06 */
+};
+
+/* SCSI IO Request Descriptor */
+struct MPI2_SCSI_IO_REQUEST_DESCRIPTOR {
+	u8              RequestFlags;               /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u16             SMID;                       /* 0x02 */
+	u16             LMID;                       /* 0x04 */
+	u16             DevHandle;                  /* 0x06 */
+};
+
+/* SCSI Target Request Descriptor */
+struct MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR {
+	u8              RequestFlags;               /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u16             SMID;                       /* 0x02 */
+	u16             LMID;                       /* 0x04 */
+	u16             IoIndex;                    /* 0x06 */
+};
+
+/* RAID Accelerator Request Descriptor */
+struct MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
+	u8              RequestFlags;               /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u16             SMID;                       /* 0x02 */
+	u16             LMID;                       /* 0x04 */
+	u16             Reserved;                   /* 0x06 */
+};
+
+/* union of Request Descriptors */
+union MEGASAS_REQUEST_DESCRIPTOR_UNION {
+	struct MPI2_DEFAULT_REQUEST_DESCRIPTOR             Default;
+	struct MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR       HighPriority;
+	struct MPI2_SCSI_IO_REQUEST_DESCRIPTOR             SCSIIO;
+	struct MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR         SCSITarget;
+	struct MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR          RAIDAccelerator;
+	struct MEGASAS_RAID_MFA_IO_REQUEST_DESCRIPTOR      MFAIo;
+	union {
+		struct {
+			u32 low;
+			u32 high;
+		} u;
+		u64 Words;
+	};
+};
+
+/* Default Reply Descriptor */
+struct MPI2_DEFAULT_REPLY_DESCRIPTOR {
+	u8              ReplyFlags;                 /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u16             DescriptorTypeDependent1;   /* 0x02 */
+	u32             DescriptorTypeDependent2;   /* 0x04 */
+};
+
+/* Address Reply Descriptor */
+struct MPI2_ADDRESS_REPLY_DESCRIPTOR {
+	u8              ReplyFlags;                 /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u16             SMID;                       /* 0x02 */
+	u32             ReplyFrameAddress;          /* 0x04 */
+};
+
+/* SCSI IO Success Reply Descriptor */
+struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR {
+	u8              ReplyFlags;                 /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u16             SMID;                       /* 0x02 */
+	u16             TaskTag;                    /* 0x04 */
+	u16             Reserved1;                  /* 0x06 */
+};
+
+/* TargetAssist Success Reply Descriptor */
+struct MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR {
+	u8              ReplyFlags;                 /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u16             SMID;                       /* 0x02 */
+	u8              SequenceNumber;             /* 0x04 */
+	u8              Reserved1;                  /* 0x05 */
+	u16             IoIndex;                    /* 0x06 */
+};
+
+/* Target Command Buffer Reply Descriptor */
+struct MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR {
+	u8              ReplyFlags;                 /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u8              VP_ID;                      /* 0x02 */
+	u8              Flags;                      /* 0x03 */
+	u16             InitiatorDevHandle;         /* 0x04 */
+	u16             IoIndex;                    /* 0x06 */
+};
+
+/* RAID Accelerator Success Reply Descriptor */
+struct MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
+	u8              ReplyFlags;                 /* 0x00 */
+	u8              MSIxIndex;                  /* 0x01 */
+	u16             SMID;                       /* 0x02 */
+	u32             Reserved;                   /* 0x04 */
+};
+
+/* union of Reply Descriptors */
+union MPI2_REPLY_DESCRIPTORS_UNION {
+	struct MPI2_DEFAULT_REPLY_DESCRIPTOR                   Default;
+	struct MPI2_ADDRESS_REPLY_DESCRIPTOR                   AddressReply;
+	struct MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR           SCSIIOSuccess;
+	struct MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
+	struct MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
+	struct MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR
+	RAIDAcceleratorSuccess;
+	u64                                             Words;
+};
+
+/* IOCInit Request message */
+struct MPI2_IOC_INIT_REQUEST {
+	u8                      WhoInit;                        /* 0x00 */
+	u8                      Reserved1;                      /* 0x01 */
+	u8                      ChainOffset;                    /* 0x02 */
+	u8                      Function;                       /* 0x03 */
+	u16                     Reserved2;                      /* 0x04 */
+	u8                      Reserved3;                      /* 0x06 */
+	u8                      MsgFlags;                       /* 0x07 */
+	u8                      VP_ID;                          /* 0x08 */
+	u8                      VF_ID;                          /* 0x09 */
+	u16                     Reserved4;                      /* 0x0A */
+	u16                     MsgVersion;                     /* 0x0C */
+	u16                     HeaderVersion;                  /* 0x0E */
+	u32                     Reserved5;                      /* 0x10 */
+	u16                     Reserved6;                      /* 0x14 */
+	u8                      Reserved7;                      /* 0x16 */
+	u8                      HostMSIxVectors;                /* 0x17 */
+	u16                     Reserved8;                      /* 0x18 */
+	u16                     SystemRequestFrameSize;         /* 0x1A */
+	u16                     ReplyDescriptorPostQueueDepth;  /* 0x1C */
+	u16                     ReplyFreeQueueDepth;            /* 0x1E */
+	u32                     SenseBufferAddressHigh;         /* 0x20 */
+	u32                     SystemReplyAddressHigh;         /* 0x24 */
+	u64                     SystemRequestFrameBaseAddress;  /* 0x28 */
+	u64                     ReplyDescriptorPostQueueAddress;/* 0x30 */
+	u64                     ReplyFreeQueueAddress;          /* 0x38 */
+	u64                     TimeStamp;                      /* 0x40 */
+};
+
+/* mrpriv defines */
+#define MR_PD_INVALID 0xFFFF
+#define MAX_SPAN_DEPTH 8
+#define MAX_RAIDMAP_SPAN_DEPTH (MAX_SPAN_DEPTH)
+#define MAX_ROW_SIZE 32
+#define MAX_RAIDMAP_ROW_SIZE (MAX_ROW_SIZE)
+#define MAX_LOGICAL_DRIVES 64
+#define MAX_RAIDMAP_LOGICAL_DRIVES (MAX_LOGICAL_DRIVES)
+#define MAX_RAIDMAP_VIEWS (MAX_LOGICAL_DRIVES)
+#define MAX_ARRAYS 128
+#define MAX_RAIDMAP_ARRAYS (MAX_ARRAYS)
+#define MAX_PHYSICAL_DEVICES 256
+#define MAX_RAIDMAP_PHYSICAL_DEVICES (MAX_PHYSICAL_DEVICES)
+#define MR_DCMD_LD_MAP_GET_INFO             0x0300e101
+
+struct MR_DEV_HANDLE_INFO {
+	u16     curDevHdl;
+	u8      validHandles;
+	u8      reserved;
+	u16     devHandle[2];
+};
+
+struct MR_ARRAY_INFO {
+	u16      pd[MAX_RAIDMAP_ROW_SIZE];
+};
+
+struct MR_QUAD_ELEMENT {
+	u64     logStart;
+	u64     logEnd;
+	u64     offsetInSpan;
+	u32     diff;
+	u32     reserved1;
+};
+
+struct MR_SPAN_INFO {
+	u32             noElements;
+	u32             reserved1;
+	struct MR_QUAD_ELEMENT quad[MAX_RAIDMAP_SPAN_DEPTH];
+};
+
+struct MR_LD_SPAN {
+	u64      startBlk;
+	u64      numBlks;
+	u16      arrayRef;
+	u8       reserved[6];
+};
+
+struct MR_SPAN_BLOCK_INFO {
+	u64          num_rows;
+	struct MR_LD_SPAN   span;
+	struct MR_SPAN_INFO block_span_info;
+};
+
+struct MR_LD_RAID {
+	struct {
+		u32     fpCapable:1;
+		u32     reserved5:3;
+		u32     ldPiMode:4;
+		u32     pdPiMode:4;
+		u32     encryptionType:8;
+		u32     fpWriteCapable:1;
+		u32     fpReadCapable:1;
+		u32     fpWriteAcrossStripe:1;
+		u32     fpReadAcrossStripe:1;
+		u32     reserved4:8;
+	} capability;
+	u32     reserved6;
+	u64     size;
+	u8      spanDepth;
+	u8      level;
+	u8      stripeShift;
+	u8      rowSize;
+	u8      rowDataSize;
+	u8      writeMode;
+	u8      PRL;
+	u8      SRL;
+	u16     targetId;
+	u8      ldState;
+	u8      regTypeReqOnWrite;
+	u8      modFactor;
+	u8      reserved2[1];
+	u16     seqNum;
+
+	struct {
+		u32 ldSyncRequired:1;
+		u32 reserved:31;
+	} flags;
+
+	u8      reserved3[0x5C];
+};
+
+struct MR_LD_SPAN_MAP {
+	struct MR_LD_RAID          ldRaid;
+	u8                  dataArmMap[MAX_RAIDMAP_ROW_SIZE];
+	struct MR_SPAN_BLOCK_INFO  spanBlock[MAX_RAIDMAP_SPAN_DEPTH];
+};
+
+struct MR_FW_RAID_MAP {
+	u32                 totalSize;
+	union {
+		struct {
+			u32         maxLd;
+			u32         maxSpanDepth;
+			u32         maxRowSize;
+			u32         maxPdCount;
+			u32         maxArrays;
+		} validationInfo;
+		u32             version[5];
+		u32             reserved1[5];
+	};
+
+	u32                 ldCount;
+	u32                 Reserved1;
+	u8                  ldTgtIdToLd[MAX_RAIDMAP_LOGICAL_DRIVES+
+					MAX_RAIDMAP_VIEWS];
+	u8                  fpPdIoTimeoutSec;
+	u8                  reserved2[7];
+	struct MR_ARRAY_INFO       arMapInfo[MAX_RAIDMAP_ARRAYS];
+	struct MR_DEV_HANDLE_INFO  devHndlInfo[MAX_RAIDMAP_PHYSICAL_DEVICES];
+	struct MR_LD_SPAN_MAP      ldSpanMap[1];
+};
+
+struct IO_REQUEST_INFO {
+	u64 ldStartBlock;
+	u32 numBlocks;
+	u16 ldTgtId;
+	u8 isRead;
+	u16 devHandle;
+	u64 pdBlock;
+	u8 fpOkForIo;
+};
+
+struct MR_LD_TARGET_SYNC {
+	u8  targetId;
+	u8  reserved;
+	u16 seqNum;
+};
+
+#define IEEE_SGE_FLAGS_ADDR_MASK            (0x03)
+#define IEEE_SGE_FLAGS_SYSTEM_ADDR          (0x00)
+#define IEEE_SGE_FLAGS_IOCDDR_ADDR          (0x01)
+#define IEEE_SGE_FLAGS_IOCPLB_ADDR          (0x02)
+#define IEEE_SGE_FLAGS_IOCPLBNTA_ADDR       (0x03)
+#define IEEE_SGE_FLAGS_CHAIN_ELEMENT        (0x80)
+#define IEEE_SGE_FLAGS_END_OF_LIST          (0x40)
+
+struct megasas_register_set;
+struct megasas_instance;
+
+union desc_word {
+	u64 word;
+	struct {
+		u32 low;
+		u32 high;
+	} u;
+};
+
+struct megasas_cmd_fusion {
+	struct MPI2_RAID_SCSI_IO_REQUEST	*io_request;
+	dma_addr_t			io_request_phys_addr;
+
+	union MPI2_SGE_IO_UNION	*sg_frame;
+	dma_addr_t		sg_frame_phys_addr;
+
+	u8 *sense;
+	dma_addr_t sense_phys_addr;
+
+	struct list_head list;
+	struct scsi_cmnd *scmd;
+	struct megasas_instance *instance;
+
+	u8 retry_for_fw_reset;
+	union MEGASAS_REQUEST_DESCRIPTOR_UNION  *request_desc;
+
+	/*
+	 * Context for a MFI frame.
+	 * Used to get the mfi cmd from list when a MFI cmd is completed
+	 */
+	u32 sync_cmd_idx;
+	u32 index;
+	u8 flags;
+};
+
+struct LD_LOAD_BALANCE_INFO {
+	u8	loadBalanceFlag;
+	u8	reserved1;
+	u16     raid1DevHandle[2];
+	atomic_t     scsi_pending_cmds[2];
+	u64     last_accessed_block[2];
+};
+
+struct MR_FW_RAID_MAP_ALL {
+	struct MR_FW_RAID_MAP raidMap;
+	struct MR_LD_SPAN_MAP ldSpanMap[MAX_LOGICAL_DRIVES - 1];
+} __attribute__ ((packed));
+
+struct fusion_context {
+	struct megasas_cmd_fusion **cmd_list;
+	struct list_head cmd_pool;
+
+	spinlock_t cmd_pool_lock;
+
+	dma_addr_t req_frames_desc_phys;
+	u8 *req_frames_desc;
+
+	struct dma_pool *io_request_frames_pool;
+	dma_addr_t io_request_frames_phys;
+	u8 *io_request_frames;
+
+	struct dma_pool *sg_dma_pool;
+	struct dma_pool *sense_dma_pool;
+
+	dma_addr_t reply_frames_desc_phys;
+	union MPI2_REPLY_DESCRIPTORS_UNION *reply_frames_desc;
+	struct dma_pool *reply_frames_desc_pool;
+
+	u16 last_reply_idx;
+
+	u32 reply_q_depth;
+	u32 request_alloc_sz;
+	u32 reply_alloc_sz;
+	u32 io_frames_alloc_sz;
+
+	u16	max_sge_in_main_msg;
+	u16	max_sge_in_chain;
+
+	u8	chain_offset_io_request;
+	u8	chain_offset_mfi_pthru;
+
+	struct MR_FW_RAID_MAP_ALL *ld_map[2];
+	dma_addr_t ld_map_phys[2];
+
+	u32 map_sz;
+	u8 fast_path_io;
+	struct LD_LOAD_BALANCE_INFO load_balance_info[MAX_LOGICAL_DRIVES];
+};
+
+union desc_value {
+	u64 word;
+	struct {
+		u32 low;
+		u32 high;
+	} u;
+};
+
+#endif /* _MEGARAID_SAS_FUSION_H_ */
diff --git a/drivers/scsi/mesh.c b/drivers/scsi/mesh.c
index 1f784fde251..197aa1b3f0f 100644
--- a/drivers/scsi/mesh.c
+++ b/drivers/scsi/mesh.c
@@ -1627,7 +1627,7 @@ static void cmd_complete(struct mesh_state *ms)
  * Called by midlayer with host locked to queue a new
  * request
  */
-static int mesh_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int mesh_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct mesh_state *ms;
 
@@ -1648,6 +1648,8 @@ static int mesh_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(mesh_queue)
+
 /*
  * Called to handle interrupts, either call by the interrupt
  * handler (do_mesh_interrupt) or by other functions in
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h
index 4b1c2f0350f..8be75e65f76 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
  *                  scatter/gather formats.
  *  Creation Date:  June 21, 2006
  *
- *  mpi2.h Version:  02.00.15
+ *  mpi2.h Version:  02.00.16
  *
  *  Version History
  *  ---------------
@@ -61,6 +61,8 @@
  *                      Added define for MPI2_FUNCTION_PWR_MGMT_CONTROL.
  *                      Added defines for product-specific range of message
  *                      function codes, 0xF0 to 0xFF.
+ *  05-12-10  02.00.16  Bumped MPI2_HEADER_VERSION_UNIT.
+ *                      Added alternative defines for the SGE Direction bit.
  *  --------------------------------------------------------------------------
  */
 
@@ -86,7 +88,7 @@
 #define MPI2_VERSION_02_00                  (0x0200)
 
 /* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x0F)
+#define MPI2_HEADER_VERSION_UNIT            (0x10)
 #define MPI2_HEADER_VERSION_DEV             (0x00)
 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
@@ -929,6 +931,9 @@ typedef struct _MPI2_MPI_SGE_UNION
 #define MPI2_SGE_FLAGS_IOC_TO_HOST              (0x00)
 #define MPI2_SGE_FLAGS_HOST_TO_IOC              (0x04)
 
+#define MPI2_SGE_FLAGS_DEST                     (MPI2_SGE_FLAGS_IOC_TO_HOST)
+#define MPI2_SGE_FLAGS_SOURCE                   (MPI2_SGE_FLAGS_HOST_TO_IOC)
+
 /* Address Size */
 
 #define MPI2_SGE_FLAGS_32_BIT_ADDRESSING        (0x00)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index e3728d736d8..d76a6584760 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Configuration messages and pages
  *  Creation Date:  November 10, 2006
  *
- *    mpi2_cnfg.h Version:  02.00.14
+ *    mpi2_cnfg.h Version:  02.00.15
  *
  *  Version History
  *  ---------------
@@ -121,6 +121,10 @@
  *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
  *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
  *                      Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
+ *  05-12-10  02.00.15  Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
+ *                      define.
+ *                      Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
+ *                      Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
  *  --------------------------------------------------------------------------
  */
 
@@ -333,7 +337,7 @@ typedef struct _MPI2_CONFIG_REQUEST
 #define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM          (0x06)
 #define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE      (0x07)
 
-/* values for SGLFlags field are in the SGL section of mpi2.h */
+/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
 
 
 /* Config Reply Message */
@@ -379,6 +383,8 @@ typedef struct _MPI2_CONFIG_REPLY
 #define MPI2_MFGPAGE_DEVID_SAS2116_1                (0x0064)
 #define MPI2_MFGPAGE_DEVID_SAS2116_2                (0x0065)
 
+#define MPI2_MFGPAGE_DEVID_SSS6200                  (0x007E)
+
 #define MPI2_MFGPAGE_DEVID_SAS2208_1                (0x0080)
 #define MPI2_MFGPAGE_DEVID_SAS2208_2                (0x0081)
 #define MPI2_MFGPAGE_DEVID_SAS2208_3                (0x0082)
@@ -390,6 +396,8 @@ typedef struct _MPI2_CONFIG_REPLY
 #define MPI2_MFGPAGE_DEVID_SAS2308_3                (0x006E)
 
 
+
+
 /* Manufacturing Page 0 */
 
 typedef struct _MPI2_CONFIG_PAGE_MAN_0
@@ -729,6 +737,7 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1
 /* IO Unit Page 1 Flags defines */
 #define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY    (0x00000800)
 #define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE          (0x00000600)
+#define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT         (9)
 #define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE        (0x00000000)
 #define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE       (0x00000200)
 #define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE     (0x00000400)
@@ -1347,6 +1356,7 @@ typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0
 #define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION        (0x00040000)
 #define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT           (0x00020000)
 #define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS        (0x00010000)
+#define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT        (0x00000080)
 #define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED               (0x00000040)
 #define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE              (0x00000020)
 #define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR          (0x00000000)
@@ -1469,11 +1479,15 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0
 #define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA             (0x03)
 #define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD   (0x04)
 #define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA    (0x05)
+#define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE          (0x06)
 #define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN             (0xFF)
 
 /* PhysDiskAttributes defines */
+#define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK                (0x0C)
 #define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE         (0x08)
 #define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE           (0x04)
+
+#define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK             (0x03)
 #define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL              (0x02)
 #define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL             (0x01)
 
@@ -1545,6 +1559,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1
 #define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE        (0x03)
 #define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR            (0x04)
 #define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS    (0x05)
+#define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY          (0x06)
 #define MPI2_SAS_NEG_LINK_RATE_1_5                      (0x08)
 #define MPI2_SAS_NEG_LINK_RATE_3_0                      (0x09)
 #define MPI2_SAS_NEG_LINK_RATE_6_0                      (0x0A)
@@ -1571,6 +1586,7 @@ typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1
 #define MPI2_SAS_PHYINFO_PHY_VACANT                     (0x80000000)
 
 #define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK       (0x18000000)
+#define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION      (27)
 #define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE               (0x00000000)
 #define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL              (0x08000000)
 #define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER              (0x10000000)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt
index bd6c92b5fae..b1e88f26b74 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt
@@ -291,6 +291,7 @@ mpi2_raid.h
  *                      can be sized by the build environment.
  *  07-30-09  02.00.04  Added proper define for the Use Default Settings bit of
  *                      VolumeCreationFlags and marked the old one as obsolete.
+ *  05-12-10  02.00.05  Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
  *  --------------------------------------------------------------------------
 
 mpi2_sas.h
@@ -301,6 +302,7 @@ mpi2_sas.h
  *                      Request.
  *  10-28-09  02.00.03  Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
  *                      to MPI2_SGE_IO_UNION since it supports chained SGLs.
+ *  05-12-10  02.00.04  Modified some comments.
  *  --------------------------------------------------------------------------
 
 mpi2_targ.h
@@ -324,6 +326,7 @@ mpi2_tool.h
  *                      and reply messages.
  *                      Added MPI2_DIAG_BUF_TYPE_EXTENDED.
  *                      Incremented MPI2_DIAG_BUF_TYPE_COUNT.
+ *  05-12-10  02.00.05  Added Diagnostic Data Upload tool.
  *  --------------------------------------------------------------------------
 
 mpi2_type.h
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
index c4c99dfcb82..20e6b886934 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
@@ -6,7 +6,7 @@
  *          Title:  MPI SCSI initiator mode messages and structures
  *  Creation Date:  June 23, 2006
  *
- *    mpi2_init.h Version:  02.00.09
+ *    mpi2_init.h Version:  02.00.10
  *
  *  Version History
  *  ---------------
@@ -32,6 +32,7 @@
  *                      Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
  *                      Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
  *  02-10-10  02.00.09  Removed unused structure that had "#if 0" around it.
+ *  05-12-10  02.00.10  Added optional vendor-unique region to SCSI IO Request.
  *  --------------------------------------------------------------------------
  */
 
@@ -98,7 +99,13 @@ typedef struct _MPI2_SCSI_IO_REQUEST
     U8                      LUN[8];                         /* 0x34 */
     U32                     Control;                        /* 0x3C */
     MPI2_SCSI_IO_CDB_UNION  CDB;                            /* 0x40 */
+
+#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /* typically this is left undefined */
+	MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion;
+#endif
+
     MPI2_SGE_IO_UNION       SGL;                            /* 0x60 */
+
 } MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST,
   Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t;
 
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
index 495bedc4d1f..761cbdb8a03 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_ioc.h
@@ -6,7 +6,7 @@
  *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
  *  Creation Date:  October 11, 2006
  *
- *  mpi2_ioc.h Version:  02.00.14
+ *  mpi2_ioc.h Version:  02.00.15
  *
  *  Version History
  *  ---------------
@@ -101,6 +101,8 @@
  *  02-10-10  02.00.14  Added SAS Quiesce Event structure and defines.
  *                      Added PowerManagementControl Request structures and
  *                      defines.
+ *  05-12-10  02.00.15  Marked Task Set Full Event as obsolete.
+ *                      Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
  *  --------------------------------------------------------------------------
  */
 
@@ -456,7 +458,7 @@ typedef struct _MPI2_EVENT_NOTIFICATION_REPLY
 #define MPI2_EVENT_STATE_CHANGE                     (0x0002)
 #define MPI2_EVENT_HARD_RESET_RECEIVED              (0x0005)
 #define MPI2_EVENT_EVENT_CHANGE                     (0x000A)
-#define MPI2_EVENT_TASK_SET_FULL                    (0x000E)
+#define MPI2_EVENT_TASK_SET_FULL                    (0x000E) /* obsolete */
 #define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE         (0x000F)
 #define MPI2_EVENT_IR_OPERATION_STATUS              (0x0014)
 #define MPI2_EVENT_SAS_DISCOVERY                    (0x0016)
@@ -517,6 +519,7 @@ typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED
   MPI2_POINTER pMpi2EventDataHardResetReceived_t;
 
 /* Task Set Full Event data */
+/*   this event is obsolete */
 
 typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL
 {
@@ -831,6 +834,7 @@ typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST
 #define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE            (0x03)
 #define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR                (0x04)
 #define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS        (0x05)
+#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY              (0x06)
 #define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5                     (0x08)
 #define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0                     (0x09)
 #define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0                     (0x0A)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h
index 5160c33d2a0..bd61a7b60a2 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_raid.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_raid.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2008 LSI Corporation.
+ *  Copyright (c) 2000-2010 LSI Corporation.
  *
  *
  *           Name:  mpi2_raid.h
  *          Title:  MPI Integrated RAID messages and structures
  *  Creation Date:  April 26, 2007
  *
- *    mpi2_raid.h Version:  02.00.04
+ *    mpi2_raid.h Version:  02.00.05
  *
  *  Version History
  *  ---------------
@@ -22,6 +22,7 @@
  *                      can be sized by the build environment.
  *  07-30-09  02.00.04  Added proper define for the Use Default Settings bit of
  *                      VolumeCreationFlags and marked the old one as obsolete.
+ *  05-12-10  02.00.05  Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
  *  --------------------------------------------------------------------------
  */
 
@@ -260,6 +261,7 @@ typedef struct _MPI2_RAID_VOL_INDICATOR
 #define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
 #define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK    (0x00000002)
 #define MPI2_RAID_VOL_FLAGS_OP_RESYNC               (0x00000003)
+#define MPI2_RAID_VOL_FLAGS_OP_MDC                  (0x00000004)
 
 
 /* RAID Action Reply ActionData union */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
index 2d8aeed5139..608f6d6e6fc 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
@@ -1,12 +1,12 @@
 /*
- *  Copyright (c) 2000-2007 LSI Corporation.
+ *  Copyright (c) 2000-2010 LSI Corporation.
  *
  *
  *           Name:  mpi2_sas.h
  *          Title:  MPI Serial Attached SCSI structures and definitions
  *  Creation Date:  February 9, 2007
  *
- *  mpi2.h Version:  02.00.03
+ *  mpi2_sas.h Version:  02.00.04
  *
  *  Version History
  *  ---------------
@@ -20,6 +20,7 @@
  *                      Request.
  *  10-28-09  02.00.03  Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
  *                      to MPI2_SGE_IO_UNION since it supports chained SGLs.
+ *  05-12-10  02.00.04  Modified some comments.
  *  --------------------------------------------------------------------------
  */
 
@@ -110,7 +111,7 @@ typedef struct _MPI2_SMP_PASSTHROUGH_REQUEST
 /* values for PassthroughFlags field */
 #define MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE      (0x80)
 
-/* values for SGLFlags field are in the SGL section of mpi2.h */
+/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
 
 
 /* SMP Passthrough Reply Message */
@@ -174,7 +175,7 @@ typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST
 #define MPI2_SATA_PT_REQ_PT_FLAGS_WRITE             (0x0002)
 #define MPI2_SATA_PT_REQ_PT_FLAGS_READ              (0x0001)
 
-/* values for SGLFlags field are in the SGL section of mpi2.h */
+/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
 
 
 /* SATA Passthrough Reply Message */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
index 686b09b8121..5c6e3a67bb9 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
@@ -6,7 +6,7 @@
  *          Title:  MPI diagnostic tool structures and definitions
  *  Creation Date:  March 26, 2007
  *
- *    mpi2_tool.h Version:  02.00.04
+ *    mpi2_tool.h Version:  02.00.05
  *
  *  Version History
  *  ---------------
@@ -22,6 +22,7 @@
  *                      and reply messages.
  *                      Added MPI2_DIAG_BUF_TYPE_EXTENDED.
  *                      Incremented MPI2_DIAG_BUF_TYPE_COUNT.
+ *  05-12-10  02.00.05  Added Diagnostic Data Upload tool.
  *  --------------------------------------------------------------------------
  */
 
@@ -37,6 +38,7 @@
 /* defines for the Tools */
 #define MPI2_TOOLBOX_CLEAN_TOOL                     (0x00)
 #define MPI2_TOOLBOX_MEMORY_MOVE_TOOL               (0x01)
+#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL          (0x02)
 #define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL          (0x03)
 #define MPI2_TOOLBOX_BEACON_TOOL                    (0x05)
 #define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL            (0x06)
@@ -102,8 +104,7 @@ typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST
 *  Toolbox Memory Move request
 ****************************************************************************/
 
-typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST
-{
+typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST {
     U8                      Tool;                       /* 0x00 */
     U8                      Reserved1;                  /* 0x01 */
     U8                      ChainOffset;                /* 0x02 */
@@ -120,6 +121,44 @@ typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST
 
 
 /****************************************************************************
+*  Toolbox Diagnostic Data Upload request
+****************************************************************************/
+
+typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST {
+	U8                      Tool;                       /* 0x00 */
+	U8                      Reserved1;                  /* 0x01 */
+	U8                      ChainOffset;                /* 0x02 */
+	U8                      Function;                   /* 0x03 */
+	U16                     Reserved2;                  /* 0x04 */
+	U8                      Reserved3;                  /* 0x06 */
+	U8                      MsgFlags;                   /* 0x07 */
+	U8                      VP_ID;                      /* 0x08 */
+	U8                      VF_ID;                      /* 0x09 */
+	U16                     Reserved4;                  /* 0x0A */
+	U8                      SGLFlags;                   /* 0x0C */
+	U8                      Reserved5;                  /* 0x0D */
+	U16                     Reserved6;                  /* 0x0E */
+	U32                     Flags;                      /* 0x10 */
+	U32                     DataLength;                 /* 0x14 */
+	MPI2_SGE_SIMPLE_UNION   SGL;                        /* 0x18 */
+} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
+MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
+Mpi2ToolboxDiagDataUploadRequest_t,
+MPI2_POINTER pMpi2ToolboxDiagDataUploadRequest_t;
+
+/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
+
+
+typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER {
+	U32                     DiagDataLength;             /* 00h */
+	U8                      FormatCode;                 /* 04h */
+	U8                      Reserved1;                  /* 05h */
+	U16                     Reserved2;                  /* 06h */
+} MPI2_DIAG_DATA_UPLOAD_HEADER, MPI2_POINTER PTR_MPI2_DIAG_DATA_UPLOAD_HEADER,
+Mpi2DiagDataUploadHeader_t, MPI2_POINTER pMpi2DiagDataUploadHeader_t;
+
+
+/****************************************************************************
 *  Toolbox ISTWI Read Write Tool
 ****************************************************************************/
 
@@ -162,7 +201,7 @@ typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
 #define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS          (0x11)
 #define MPI2_TOOL_ISTWI_ACTION_RESET                (0x12)
 
-/* values for SGLFlags field are in the SGL section of mpi2.h */
+/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
 
 
 /* Toolbox ISTWI Read Write Tool reply message */
@@ -248,7 +287,7 @@ typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
   Mpi2ToolboxDiagnosticCliRequest_t,
   MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t;
 
-/* values for SGLFlags field are in the SGL section of mpi2.h */
+/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
 
 
 /* Toolbox Diagnostic CLI Tool reply message */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 12faf64f91b..b2a817055b8 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -65,7 +65,6 @@
 static MPT_CALLBACK	mpt_callbacks[MPT_MAX_CALLBACKS];
 
 #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
-#define MPT2SAS_MAX_REQUEST_QUEUE 600 /* maximum controller queue depth */
 
 static int max_queue_depth = -1;
 module_param(max_queue_depth, int, 0);
@@ -79,6 +78,10 @@ static int msix_disable = -1;
 module_param(msix_disable, int, 0);
 MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
 
+static int missing_delay[2] = {-1, -1};
+module_param_array(missing_delay, int, NULL, 0);
+MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
+
 /* diag_buffer_enable is bitwise
  * bit 0 set = TRACE
  * bit 1 set = SNAPSHOT
@@ -515,9 +518,6 @@ _base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
 	case MPI2_EVENT_EVENT_CHANGE:
 		desc = "Event Change";
 		break;
-	case MPI2_EVENT_TASK_SET_FULL:
-		desc = "Task Set Full";
-		break;
 	case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
 		desc = "Device Status Change";
 		break;
@@ -758,7 +758,7 @@ _base_get_cb_idx(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 		if (smid < ioc->internal_smid) {
 			i = smid - ioc->hi_priority_smid;
 			cb_idx = ioc->hpr_lookup[i].cb_idx;
-		} else {
+		} else if (smid <= ioc->hba_queue_depth)  {
 			i = smid - ioc->internal_smid;
 			cb_idx = ioc->internal_lookup[i].cb_idx;
 		}
@@ -848,6 +848,7 @@ _base_interrupt(int irq, void *bus_id)
 		return IRQ_NONE;
 
 	completed_cmds = 0;
+	cb_idx = 0xFF;
 	do {
 		rd.word = rpf->Words;
 		if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
@@ -860,6 +861,9 @@ _base_interrupt(int irq, void *bus_id)
 		    MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
 			reply = le32_to_cpu
 				(rpf->AddressReply.ReplyFrameAddress);
+			if (reply > ioc->reply_dma_max_address ||
+			    reply < ioc->reply_dma_min_address)
+				reply = 0;
 		} else if (request_desript_type ==
 		    MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER)
 			goto next;
@@ -1489,6 +1493,7 @@ mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 {
 	unsigned long flags;
 	int i;
+	struct chain_tracker *chain_req, *next;
 
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
 	if (smid >= ioc->hi_priority_smid) {
@@ -1511,6 +1516,14 @@ mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 
 	/* scsiio queue */
 	i = smid - 1;
+	if (!list_empty(&ioc->scsi_lookup[i].chain_list)) {
+		list_for_each_entry_safe(chain_req, next,
+		    &ioc->scsi_lookup[i].chain_list, tracker_list) {
+			list_del_init(&chain_req->tracker_list);
+			list_add_tail(&chain_req->tracker_list,
+			    &ioc->free_chain_list);
+		}
+	}
 	ioc->scsi_lookup[i].cb_idx = 0xFF;
 	ioc->scsi_lookup[i].scmd = NULL;
 	list_add_tail(&ioc->scsi_lookup[i].tracker_list,
@@ -1819,6 +1832,97 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
 }
 
 /**
+ * _base_update_missing_delay - change the missing delay timers
+ * @ioc: per adapter object
+ * @device_missing_delay: amount of time till device is reported missing
+ * @io_missing_delay: interval IO is returned when there is a missing device
+ *
+ * Return nothing.
+ *
+ * Passed on the command line, this function will modify the device missing
+ * delay, as well as the io missing delay. This should be called at driver
+ * load time.
+ */
+static void
+_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
+	u16 device_missing_delay, u8 io_missing_delay)
+{
+	u16 dmd, dmd_new, dmd_orignal;
+	u8 io_missing_delay_original;
+	u16 sz;
+	Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
+	Mpi2ConfigReply_t mpi_reply;
+	u8 num_phys = 0;
+	u16 ioc_status;
+
+	mpt2sas_config_get_number_hba_phys(ioc, &num_phys);
+	if (!num_phys)
+		return;
+
+	sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys *
+	    sizeof(Mpi2SasIOUnit1PhyData_t));
+	sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
+	if (!sas_iounit_pg1) {
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	if ((mpt2sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
+	    sas_iounit_pg1, sz))) {
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+	ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
+	    MPI2_IOCSTATUS_MASK;
+	if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
+		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
+		    ioc->name, __FILE__, __LINE__, __func__);
+		goto out;
+	}
+
+	/* device missing delay */
+	dmd = sas_iounit_pg1->ReportDeviceMissingDelay;
+	if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+		dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+	else
+		dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+	dmd_orignal = dmd;
+	if (device_missing_delay > 0x7F) {
+		dmd = (device_missing_delay > 0x7F0) ? 0x7F0 :
+		    device_missing_delay;
+		dmd = dmd / 16;
+		dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16;
+	} else
+		dmd = device_missing_delay;
+	sas_iounit_pg1->ReportDeviceMissingDelay = dmd;
+
+	/* io missing delay */
+	io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay;
+	sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay;
+
+	if (!mpt2sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1,
+	    sz)) {
+		if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
+			dmd_new = (dmd &
+			    MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
+		else
+			dmd_new =
+		    dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
+		printk(MPT2SAS_INFO_FMT "device_missing_delay: old(%d), "
+		    "new(%d)\n", ioc->name, dmd_orignal, dmd_new);
+		printk(MPT2SAS_INFO_FMT "ioc_missing_delay: old(%d), "
+		    "new(%d)\n", ioc->name, io_missing_delay_original,
+		    io_missing_delay);
+		ioc->device_missing_delay = dmd_new;
+		ioc->io_missing_delay = io_missing_delay;
+	}
+
+out:
+	kfree(sas_iounit_pg1);
+}
+
+/**
  * _base_static_config_pages - static start of day config pages
  * @ioc: per adapter object
  *
@@ -1855,6 +1959,7 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
 		    MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
 	ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
 	mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
+
 }
 
 /**
@@ -1868,6 +1973,8 @@ _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
 static void
 _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
 {
+	int i;
+
 	dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
 
@@ -1932,6 +2039,20 @@ _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
 	}
 	kfree(ioc->hpr_lookup);
 	kfree(ioc->internal_lookup);
+	if (ioc->chain_lookup) {
+		for (i = 0; i < ioc->chain_depth; i++) {
+			if (ioc->chain_lookup[i].chain_buffer)
+				pci_pool_free(ioc->chain_dma_pool,
+				    ioc->chain_lookup[i].chain_buffer,
+				    ioc->chain_lookup[i].chain_buffer_dma);
+		}
+		if (ioc->chain_dma_pool)
+			pci_pool_destroy(ioc->chain_dma_pool);
+	}
+	if (ioc->chain_lookup) {
+		free_pages((ulong)ioc->chain_lookup, ioc->chain_pages);
+		ioc->chain_lookup = NULL;
+	}
 }
 
 
@@ -1953,6 +2074,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	u32 sz, total_sz;
 	u32 retry_sz;
 	u16 max_request_credit;
+	int i;
 
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
 	    __func__));
@@ -1970,14 +2092,11 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	}
 
 	/* command line tunables  for max controller queue depth */
-	if (max_queue_depth != -1) {
+	if (max_queue_depth != -1)
 		max_request_credit = (max_queue_depth < facts->RequestCredit)
 		    ? max_queue_depth : facts->RequestCredit;
-	} else {
-		max_request_credit = (facts->RequestCredit >
-		    MPT2SAS_MAX_REQUEST_QUEUE) ? MPT2SAS_MAX_REQUEST_QUEUE :
-		    facts->RequestCredit;
-	}
+	else
+		max_request_credit = facts->RequestCredit;
 
 	ioc->hba_queue_depth = max_request_credit;
 	ioc->hi_priority_depth = facts->HighPriorityCredit;
@@ -2083,7 +2202,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	 * "frame for smid=0
 	 */
 	ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
-	sz = ((ioc->scsiio_depth + 1 + ioc->chain_depth) * ioc->request_sz);
+	sz = ((ioc->scsiio_depth + 1) * ioc->request_sz);
 
 	/* hi-priority queue */
 	sz += (ioc->hi_priority_depth * ioc->request_sz);
@@ -2124,19 +2243,11 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
 	    ioc->request_sz);
 
-	ioc->chain = ioc->internal + (ioc->internal_depth *
-	    ioc->request_sz);
-	ioc->chain_dma = ioc->internal_dma + (ioc->internal_depth *
-	    ioc->request_sz);
 
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): "
 	    "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
 	    ioc->request, ioc->hba_queue_depth, ioc->request_sz,
 	    (ioc->hba_queue_depth * ioc->request_sz)/1024));
-	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool(0x%p): depth"
-	    "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->chain,
-	    ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth *
-	    ioc->request_sz))/1024));
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool: dma(0x%llx)\n",
 	    ioc->name, (unsigned long long) ioc->request_dma));
 	total_sz += sz;
@@ -2155,6 +2266,38 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	    "depth(%d)\n", ioc->name, ioc->request,
 	    ioc->scsiio_depth));
 
+	/* loop till the allocation succeeds */
+	do {
+		sz = ioc->chain_depth * sizeof(struct chain_tracker);
+		ioc->chain_pages = get_order(sz);
+		ioc->chain_lookup = (struct chain_tracker *)__get_free_pages(
+		    GFP_KERNEL, ioc->chain_pages);
+		if (ioc->chain_lookup == NULL)
+			ioc->chain_depth -= 100;
+	} while (ioc->chain_lookup == NULL);
+	ioc->chain_dma_pool = pci_pool_create("chain pool", ioc->pdev,
+	    ioc->request_sz, 16, 0);
+	if (!ioc->chain_dma_pool) {
+		printk(MPT2SAS_ERR_FMT "chain_dma_pool: pci_pool_create "
+		    "failed\n", ioc->name);
+		goto out;
+	}
+	for (i = 0; i < ioc->chain_depth; i++) {
+		ioc->chain_lookup[i].chain_buffer = pci_pool_alloc(
+		    ioc->chain_dma_pool , GFP_KERNEL,
+		    &ioc->chain_lookup[i].chain_buffer_dma);
+		if (!ioc->chain_lookup[i].chain_buffer) {
+			ioc->chain_depth = i;
+			goto chain_done;
+		}
+		total_sz += ioc->request_sz;
+	}
+chain_done:
+	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool depth"
+	    "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
+	    ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth *
+	    ioc->request_sz))/1024));
+
 	/* initialize hi-priority queue smid's */
 	ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
 	    sizeof(struct request_tracker), GFP_KERNEL);
@@ -2221,6 +2364,8 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 		    ioc->name);
 		goto out;
 	}
+	ioc->reply_dma_min_address = (u32)(ioc->reply_dma);
+	ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz;
 	dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply pool(0x%p): depth"
 	    "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->reply,
 	    ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
@@ -2302,7 +2447,6 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	return 0;
 
  out:
-	_base_release_memory_pools(ioc);
 	return -ENOMEM;
 }
 
@@ -3485,6 +3629,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 	INIT_LIST_HEAD(&ioc->free_list);
 	smid = 1;
 	for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
+		INIT_LIST_HEAD(&ioc->scsi_lookup[i].chain_list);
 		ioc->scsi_lookup[i].cb_idx = 0xFF;
 		ioc->scsi_lookup[i].smid = smid;
 		ioc->scsi_lookup[i].scmd = NULL;
@@ -3511,6 +3656,13 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
 		list_add_tail(&ioc->internal_lookup[i].tracker_list,
 		    &ioc->internal_free_list);
 	}
+
+	/* chain pool */
+	INIT_LIST_HEAD(&ioc->free_chain_list);
+	for (i = 0; i < ioc->chain_depth; i++)
+		list_add_tail(&ioc->chain_lookup[i].tracker_list,
+		    &ioc->free_chain_list);
+
 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
 
 	/* initialize Reply Free Queue */
@@ -3708,12 +3860,15 @@ mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
 	_base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
 	_base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
 	_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
-	_base_unmask_events(ioc, MPI2_EVENT_TASK_SET_FULL);
 	_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
 	r = _base_make_ioc_operational(ioc, CAN_SLEEP);
 	if (r)
 		goto out_free_resources;
 
+	if (missing_delay[0] != -1 && missing_delay[1] != -1)
+		_base_update_missing_delay(ioc, missing_delay[0],
+		    missing_delay[1]);
+
 	mpt2sas_base_start_watchdog(ioc);
 	return 0;
 
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 0b15a8bdebf..283568c6fb0 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,8 +69,8 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"06.100.00.00"
-#define MPT2SAS_MAJOR_VERSION		06
+#define MPT2SAS_DRIVER_VERSION		"07.100.00.00"
+#define MPT2SAS_MAJOR_VERSION		07
 #define MPT2SAS_MINOR_VERSION		100
 #define MPT2SAS_BUILD_VERSION		00
 #define MPT2SAS_RELEASE_VERSION		00
@@ -419,6 +419,18 @@ enum reset_type {
 };
 
 /**
+ * struct chain_tracker - firmware chain tracker
+ * @chain_buffer: chain buffer
+ * @chain_buffer_dma: physical address
+ * @tracker_list: list of free request (ioc->free_chain_list)
+ */
+struct chain_tracker {
+	void *chain_buffer;
+	dma_addr_t chain_buffer_dma;
+	struct list_head tracker_list;
+};
+
+/**
  * struct request_tracker - firmware request tracker
  * @smid: system message id
  * @scmd: scsi request pointer
@@ -430,6 +442,7 @@ struct request_tracker {
 	u16	smid;
 	struct scsi_cmnd *scmd;
 	u8	cb_idx;
+	struct list_head chain_list;
 	struct list_head tracker_list;
 };
 
@@ -704,8 +717,10 @@ struct MPT2SAS_ADAPTER {
 	wait_queue_head_t reset_wq;
 
 	/* chain */
-	u8		*chain;
-	dma_addr_t	chain_dma;
+	struct chain_tracker *chain_lookup;
+	struct list_head free_chain_list;
+	struct dma_pool *chain_dma_pool;
+	ulong		chain_pages;
 	u16 		max_sges_in_main_message;
 	u16		max_sges_in_chain_message;
 	u16		chains_needed_per_io;
@@ -737,6 +752,8 @@ struct MPT2SAS_ADAPTER {
 	u16		reply_sz;
 	u8		*reply;
 	dma_addr_t	reply_dma;
+	u32		reply_dma_max_address;
+	u32		reply_dma_min_address;
 	struct dma_pool *reply_dma_pool;
 
 	/* reply free queue */
@@ -832,6 +849,8 @@ int mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle,
     ulong timeout, struct scsi_cmnd *scmd);
 void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
 void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
+void mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
+void mpt2sas_device_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
 struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc,
     u16 handle);
 struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 40cb8aeb21b..e92b77af548 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -81,6 +81,7 @@ enum block_state {
 	BLOCKING,
 };
 
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 /**
  * _ctl_sas_device_find_by_handle - sas device search
  * @ioc: per adapter object
@@ -107,7 +108,6 @@ _ctl_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	return r;
 }
 
-#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 /**
  * _ctl_display_some_debug - debug routine
  * @ioc: per adapter object
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 16e99b68635..eda347c5797 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -931,31 +931,32 @@ _scsih_scsi_lookup_find_by_lun(struct MPT2SAS_ADAPTER *ioc, int id,
 }
 
 /**
- * _scsih_get_chain_buffer_dma - obtain block of chains (dma address)
+ * _scsih_get_chain_buffer_tracker - obtain chain tracker
  * @ioc: per adapter object
- * @smid: system request message index
+ * @smid: smid associated to an IO request
  *
- * Returns phys pointer to chain buffer.
+ * Returns chain tracker(from ioc->free_chain_list)
  */
-static dma_addr_t
-_scsih_get_chain_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+static struct chain_tracker *
+_scsih_get_chain_buffer_tracker(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 {
-	return ioc->chain_dma + ((smid - 1) * (ioc->request_sz *
-	    ioc->chains_needed_per_io));
-}
+	struct chain_tracker *chain_req;
+	unsigned long flags;
 
-/**
- * _scsih_get_chain_buffer - obtain block of chains assigned to a mf request
- * @ioc: per adapter object
- * @smid: system request message index
- *
- * Returns virt pointer to chain buffer.
- */
-static void *
-_scsih_get_chain_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
-	return (void *)(ioc->chain + ((smid - 1) * (ioc->request_sz *
-	    ioc->chains_needed_per_io)));
+	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+	if (list_empty(&ioc->free_chain_list)) {
+		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+		printk(MPT2SAS_WARN_FMT "chain buffers not available\n",
+		    ioc->name);
+		return NULL;
+	}
+	chain_req = list_entry(ioc->free_chain_list.next,
+	    struct chain_tracker, tracker_list);
+	list_del_init(&chain_req->tracker_list);
+	list_add_tail(&chain_req->tracker_list,
+	    &ioc->scsi_lookup[smid - 1].chain_list);
+	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+	return chain_req;
 }
 
 /**
@@ -986,6 +987,7 @@ _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
 	u32 sgl_flags;
 	u32 sgl_flags_last_element;
 	u32 sgl_flags_end_buffer;
+	struct chain_tracker *chain_req;
 
 	mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
 
@@ -1033,8 +1035,11 @@ _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
 
 	/* initializing the chain flags and pointers */
 	chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT;
-	chain = _scsih_get_chain_buffer(ioc, smid);
-	chain_dma = _scsih_get_chain_buffer_dma(ioc, smid);
+	chain_req = _scsih_get_chain_buffer_tracker(ioc, smid);
+	if (!chain_req)
+		return -1;
+	chain = chain_req->chain_buffer;
+	chain_dma = chain_req->chain_buffer_dma;
 	do {
 		sges_in_segment = (sges_left <=
 		    ioc->max_sges_in_chain_message) ? sges_left :
@@ -1070,8 +1075,11 @@ _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
 			sges_in_segment--;
 		}
 
-		chain_dma += ioc->request_sz;
-		chain += ioc->request_sz;
+		chain_req = _scsih_get_chain_buffer_tracker(ioc, smid);
+		if (!chain_req)
+			return -1;
+		chain = chain_req->chain_buffer;
+		chain_dma = chain_req->chain_buffer_dma;
 	} while (1);
 
 
@@ -1094,28 +1102,24 @@ _scsih_build_scatter_gather(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
- * _scsih_change_queue_depth - setting device queue depth
+ * _scsih_adjust_queue_depth - setting device queue depth
  * @sdev: scsi device struct
  * @qdepth: requested queue depth
- * @reason: calling context
  *
- * Returns queue depth.
+ *
+ * Returns nothing
  */
-static int
-_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
+static void
+_scsih_adjust_queue_depth(struct scsi_device *sdev, int qdepth)
 {
 	struct Scsi_Host *shost = sdev->host;
 	int max_depth;
-	int tag_type;
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
 	struct MPT2SAS_TARGET *sas_target_priv_data;
 	struct _sas_device *sas_device;
 	unsigned long flags;
 
-	if (reason != SCSI_QDEPTH_DEFAULT)
-		return -EOPNOTSUPP;
-
 	max_depth = shost->can_queue;
 
 	/* limit max device queue for SATA to 32 */
@@ -1141,8 +1145,27 @@ _scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
 		max_depth = 1;
 	if (qdepth > max_depth)
 		qdepth = max_depth;
-	tag_type = (qdepth == 1) ? 0 : MSG_SIMPLE_TAG;
-	scsi_adjust_queue_depth(sdev, tag_type, qdepth);
+	scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+}
+
+/**
+ * _scsih_change_queue_depth - setting device queue depth
+ * @sdev: scsi device struct
+ * @qdepth: requested queue depth
+ * @reason: SCSI_QDEPTH_DEFAULT/SCSI_QDEPTH_QFULL/SCSI_QDEPTH_RAMP_UP
+ * (see include/scsi/scsi_host.h for definition)
+ *
+ * Returns queue depth.
+ */
+static int
+_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
+{
+	if (reason == SCSI_QDEPTH_DEFAULT || reason == SCSI_QDEPTH_RAMP_UP)
+		_scsih_adjust_queue_depth(sdev, qdepth);
+	else if (reason == SCSI_QDEPTH_QFULL)
+		scsi_track_queue_full(sdev, qdepth);
+	else
+		return -EOPNOTSUPP;
 
 	if (sdev->inquiry_len > 7)
 		sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), "
@@ -2251,13 +2274,13 @@ _scsih_dev_reset(struct scsi_cmnd *scmd)
 
 	struct scsi_target *starget = scmd->device->sdev_target;
 
-	starget_printk(KERN_INFO, starget, "attempting target reset! "
+	starget_printk(KERN_INFO, starget, "attempting device reset! "
 	    "scmd(%p)\n", scmd);
 	_scsih_tm_display_info(ioc, scmd);
 
 	sas_device_priv_data = scmd->device->hostdata;
 	if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
-		starget_printk(KERN_INFO, starget, "target been deleted! "
+		starget_printk(KERN_INFO, starget, "device been deleted! "
 		    "scmd(%p)\n", scmd);
 		scmd->result = DID_NO_CONNECT << 16;
 		scmd->scsi_done(scmd);
@@ -2576,9 +2599,9 @@ _scsih_block_io_to_children_attached_to_ex(struct MPT2SAS_ADAPTER *ioc,
 	   &sas_expander->sas_port_list, port_list) {
 
 		if (mpt2sas_port->remote_identify.device_type ==
-		    MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+		    SAS_EDGE_EXPANDER_DEVICE ||
 		    mpt2sas_port->remote_identify.device_type ==
-		    MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) {
+		    SAS_FANOUT_EXPANDER_DEVICE) {
 
 			spin_lock_irqsave(&ioc->sas_node_lock, flags);
 			expander_sibling =
@@ -2715,9 +2738,10 @@ static u8
 _scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
     u8 msix_index, u32 reply)
 {
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 	Mpi2SasIoUnitControlReply_t *mpi_reply =
 	    mpt2sas_base_get_reply_virt_addr(ioc, reply);
-
+#endif
 	dewtprintk(ioc, printk(MPT2SAS_INFO_FMT
 	    "sc_complete:handle(0x%04x), (open) "
 	    "smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
@@ -3315,7 +3339,7 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
  * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
  */
 static int
-_scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
+_scsih_qcmd_lck(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 {
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
 	struct MPT2SAS_DEVICE *sas_device_priv_data;
@@ -3441,6 +3465,8 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 	return SCSI_MLQUEUE_HOST_BUSY;
 }
 
+static DEF_SCSI_QCMD(_scsih_qcmd)
+
 /**
  * _scsih_normalize_sense - normalize descriptor and fixed format sense data
  * @sense_buffer: sense data returned by target
@@ -3961,6 +3987,7 @@ _scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc)
 	Mpi2ConfigReply_t mpi_reply;
 	Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
 	u16 attached_handle;
+	u8 link_rate;
 
 	dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
 	    "updating handles for sas_host(0x%016llx)\n",
@@ -3982,15 +4009,17 @@ _scsih_sas_host_refresh(struct MPT2SAS_ADAPTER *ioc)
 	if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
 		goto out;
 	for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+		link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4;
 		if (i == 0)
 			ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
 			    PhyData[0].ControllerDevHandle);
 		ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
 		attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
 		    AttachedDevHandle);
+		if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
+			link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
 		mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
-		    attached_handle, i, sas_iounit_pg0->PhyData[i].
-		    NegotiatedLinkRate >> 4);
+		    attached_handle, i, link_rate);
 	}
  out:
 	kfree(sas_iounit_pg0);
@@ -4334,14 +4363,14 @@ _scsih_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 }
 
 /**
- * _scsih_expander_remove - removing expander object
+ * mpt2sas_expander_remove - removing expander object
  * @ioc: per adapter object
  * @sas_address: expander sas_address
  *
  * Return nothing.
  */
-static void
-_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
+void
+mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
 {
 	struct _sas_node *sas_expander;
 	unsigned long flags;
@@ -4352,6 +4381,11 @@ _scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
 	spin_lock_irqsave(&ioc->sas_node_lock, flags);
 	sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
 	    sas_address);
+	if (!sas_expander) {
+		spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+		return;
+	}
+	list_del(&sas_expander->list);
 	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
 	_scsih_expander_node_remove(ioc, sas_expander);
 }
@@ -4641,6 +4675,33 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc,
 	    sas_device_backup.sas_address));
 }
 
+/**
+ * mpt2sas_device_remove - removing device object
+ * @ioc: per adapter object
+ * @sas_address: expander sas_address
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_device_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
+{
+	struct _sas_device *sas_device;
+	unsigned long flags;
+
+	if (ioc->shost_recovery)
+		return;
+
+	spin_lock_irqsave(&ioc->sas_device_lock, flags);
+	sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+	    sas_address);
+	if (!sas_device) {
+		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+	_scsih_remove_device(ioc, sas_device);
+}
+
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 /**
  * _scsih_sas_topology_change_event_debug - debug for topology event
@@ -4735,7 +4796,7 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
 	int i;
 	u16 parent_handle, handle;
 	u16 reason_code;
-	u8 phy_number;
+	u8 phy_number, max_phys;
 	struct _sas_node *sas_expander;
 	struct _sas_device *sas_device;
 	u64 sas_address;
@@ -4773,11 +4834,13 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
 	sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc,
 	    parent_handle);
 	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-	if (sas_expander)
+	if (sas_expander) {
 		sas_address = sas_expander->sas_address;
-	else if (parent_handle < ioc->sas_hba.num_phys)
+		max_phys = sas_expander->num_phys;
+	} else if (parent_handle < ioc->sas_hba.num_phys) {
 		sas_address = ioc->sas_hba.sas_address;
-	else
+		max_phys = ioc->sas_hba.num_phys;
+	} else
 		return;
 
 	/* handle siblings events */
@@ -4791,6 +4854,8 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
 		    ioc->pci_error_recovery)
 			return;
 		phy_number = event_data->StartPhyNum + i;
+		if (phy_number >= max_phys)
+			continue;
 		reason_code = event_data->PHY[i].PhyStatus &
 		    MPI2_EVENT_SAS_TOPO_RC_MASK;
 		if ((event_data->PHY[i].PhyStatus &
@@ -4842,7 +4907,7 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
 	/* handle expander removal */
 	if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
 	    sas_expander)
-		_scsih_expander_remove(ioc, sas_address);
+		mpt2sas_expander_remove(ioc, sas_address);
 
 }
 
@@ -5771,90 +5836,6 @@ _scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
- * _scsih_task_set_full - handle task set full
- * @ioc: per adapter object
- * @fw_event: The fw_event_work object
- * Context: user.
- *
- * Throttle back qdepth.
- */
-static void
-_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
-	*fw_event)
-{
-	unsigned long flags;
-	struct _sas_device *sas_device;
-	static struct _raid_device *raid_device;
-	struct scsi_device *sdev;
-	int depth;
-	u16 current_depth;
-	u16 handle;
-	int id, channel;
-	u64 sas_address;
-	Mpi2EventDataTaskSetFull_t *event_data = fw_event->event_data;
-
-	current_depth = le16_to_cpu(event_data->CurrentDepth);
-	handle = le16_to_cpu(event_data->DevHandle);
-	spin_lock_irqsave(&ioc->sas_device_lock, flags);
-	sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
-	if (!sas_device) {
-		spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-		return;
-	}
-	spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-	id = sas_device->id;
-	channel = sas_device->channel;
-	sas_address = sas_device->sas_address;
-
-	/* if hidden raid component, then change to volume characteristics */
-	if (test_bit(handle, ioc->pd_handles) && sas_device->volume_handle) {
-		spin_lock_irqsave(&ioc->raid_device_lock, flags);
-		raid_device = _scsih_raid_device_find_by_handle(
-		    ioc, sas_device->volume_handle);
-		spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
-		if (raid_device) {
-			id = raid_device->id;
-			channel = raid_device->channel;
-			handle = raid_device->handle;
-			sas_address = raid_device->wwid;
-		}
-	}
-
-	if (ioc->logging_level & MPT_DEBUG_TASK_SET_FULL)
-		starget_printk(KERN_INFO, sas_device->starget, "task set "
-		    "full: handle(0x%04x), sas_addr(0x%016llx), depth(%d)\n",
-		    handle, (unsigned long long)sas_address, current_depth);
-
-	shost_for_each_device(sdev, ioc->shost) {
-		if (sdev->id == id && sdev->channel == channel) {
-			if (current_depth > sdev->queue_depth) {
-				if (ioc->logging_level &
-				    MPT_DEBUG_TASK_SET_FULL)
-					sdev_printk(KERN_INFO, sdev, "strange "
-					    "observation, the queue depth is"
-					    " (%d) meanwhile fw queue depth "
-					    "is (%d)\n", sdev->queue_depth,
-					    current_depth);
-				continue;
-			}
-			depth = scsi_track_queue_full(sdev,
-			    current_depth - 1);
-			if (depth > 0)
-				sdev_printk(KERN_INFO, sdev, "Queue depth "
-				    "reduced to (%d)\n", depth);
-			else if (depth < 0)
-				sdev_printk(KERN_INFO, sdev, "Tagged Command "
-				    "Queueing is being disabled\n");
-			else if (depth == 0)
-				if (ioc->logging_level &
-				     MPT_DEBUG_TASK_SET_FULL)
-					sdev_printk(KERN_INFO, sdev,
-					     "Queue depth not changed yet\n");
-		}
-	}
-}
-
-/**
  * _scsih_prep_device_scan - initialize parameters prior to device scan
  * @ioc: per adapter object
  *
@@ -6217,7 +6198,7 @@ _scsih_remove_unresponding_sas_devices(struct MPT2SAS_ADAPTER *ioc)
 			sas_expander->responding = 0;
 			continue;
 		}
-		_scsih_expander_remove(ioc, sas_expander->sas_address);
+		mpt2sas_expander_remove(ioc, sas_expander->sas_address);
 		goto retry_expander_search;
 	}
 }
@@ -6341,9 +6322,6 @@ _firmware_event_work(struct work_struct *work)
 	case MPI2_EVENT_IR_OPERATION_STATUS:
 		_scsih_sas_ir_operation_status_event(ioc, fw_event);
 		break;
-	case MPI2_EVENT_TASK_SET_FULL:
-		_scsih_task_set_full(ioc, fw_event);
-		break;
 	}
 	_scsih_fw_event_free(ioc, fw_event);
 }
@@ -6413,7 +6391,6 @@ mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
 	case MPI2_EVENT_SAS_DISCOVERY:
 	case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
 	case MPI2_EVENT_IR_PHYSICAL_DISK:
-	case MPI2_EVENT_TASK_SET_FULL:
 		break;
 
 	default: /* ignore the rest */
@@ -6488,56 +6465,23 @@ static void
 _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
     struct _sas_node *sas_expander)
 {
-	struct _sas_port *mpt2sas_port;
-	struct _sas_device *sas_device;
-	struct _sas_node *expander_sibling;
-	unsigned long flags;
-
-	if (!sas_expander)
-		return;
+	struct _sas_port *mpt2sas_port, *next;
 
 	/* remove sibling ports attached to this expander */
- retry_device_search:
-	list_for_each_entry(mpt2sas_port,
-	   &sas_expander->sas_port_list, port_list) {
-		if (mpt2sas_port->remote_identify.device_type ==
-		    SAS_END_DEVICE) {
-			spin_lock_irqsave(&ioc->sas_device_lock, flags);
-			sas_device =
-			    mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
-			   mpt2sas_port->remote_identify.sas_address);
-			spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
-			if (!sas_device)
-				continue;
-			_scsih_remove_device(ioc, sas_device);
-			if (ioc->shost_recovery)
-				return;
-			goto retry_device_search;
-		}
-	}
-
- retry_expander_search:
-	list_for_each_entry(mpt2sas_port,
+	list_for_each_entry_safe(mpt2sas_port, next,
 	   &sas_expander->sas_port_list, port_list) {
-
+		if (ioc->shost_recovery)
+			return;
 		if (mpt2sas_port->remote_identify.device_type ==
-		    MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+		    SAS_END_DEVICE)
+			mpt2sas_device_remove(ioc,
+			    mpt2sas_port->remote_identify.sas_address);
+		else if (mpt2sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
 		    mpt2sas_port->remote_identify.device_type ==
-		    MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) {
-
-			spin_lock_irqsave(&ioc->sas_node_lock, flags);
-			expander_sibling =
-			    mpt2sas_scsih_expander_find_by_sas_address(
-			    ioc, mpt2sas_port->remote_identify.sas_address);
-			spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
-			if (!expander_sibling)
-				continue;
-			_scsih_expander_remove(ioc,
-			    expander_sibling->sas_address);
-			if (ioc->shost_recovery)
-				return;
-			goto retry_expander_search;
-		}
+		    SAS_FANOUT_EXPANDER_DEVICE)
+			mpt2sas_expander_remove(ioc,
+			    mpt2sas_port->remote_identify.sas_address);
 	}
 
 	mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
@@ -6548,7 +6492,6 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
 	    sas_expander->handle, (unsigned long long)
 	    sas_expander->sas_address);
 
-	list_del(&sas_expander->list);
 	kfree(sas_expander->phy);
 	kfree(sas_expander);
 }
@@ -6666,9 +6609,7 @@ _scsih_remove(struct pci_dev *pdev)
 {
 	struct Scsi_Host *shost = pci_get_drvdata(pdev);
 	struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
-	struct _sas_port *mpt2sas_port;
-	struct _sas_device *sas_device;
-	struct _sas_node *expander_sibling;
+	struct _sas_port *mpt2sas_port, *next_port;
 	struct _raid_device *raid_device, *next;
 	struct MPT2SAS_TARGET *sas_target_priv_data;
 	struct workqueue_struct	*wq;
@@ -6700,28 +6641,18 @@ _scsih_remove(struct pci_dev *pdev)
 	}
 
 	/* free ports attached to the sas_host */
- retry_again:
-	list_for_each_entry(mpt2sas_port,
+	list_for_each_entry_safe(mpt2sas_port, next_port,
 	   &ioc->sas_hba.sas_port_list, port_list) {
 		if (mpt2sas_port->remote_identify.device_type ==
-		    SAS_END_DEVICE) {
-			sas_device =
-			    mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
-			   mpt2sas_port->remote_identify.sas_address);
-			if (sas_device) {
-				_scsih_remove_device(ioc, sas_device);
-				goto retry_again;
-			}
-		} else {
-			expander_sibling =
-			    mpt2sas_scsih_expander_find_by_sas_address(ioc,
+		    SAS_END_DEVICE)
+			mpt2sas_device_remove(ioc,
+			    mpt2sas_port->remote_identify.sas_address);
+		else if (mpt2sas_port->remote_identify.device_type ==
+		    SAS_EDGE_EXPANDER_DEVICE ||
+		    mpt2sas_port->remote_identify.device_type ==
+		    SAS_FANOUT_EXPANDER_DEVICE)
+			mpt2sas_expander_remove(ioc,
 			    mpt2sas_port->remote_identify.sas_address);
-			if (expander_sibling) {
-				_scsih_expander_remove(ioc,
-				    expander_sibling->sas_address);
-				goto retry_again;
-			}
-		}
 	}
 
 	/* free phys attached to the sas_host */
diff --git a/drivers/scsi/mpt2sas/mpt2sas_transport.c b/drivers/scsi/mpt2sas/mpt2sas_transport.c
index b55c6dc0747..cb1cdecbe0f 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_transport.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_transport.c
@@ -465,62 +465,149 @@ _transport_expander_report_manufacture(struct MPT2SAS_ADAPTER *ioc,
 	return rc;
 }
 
+/**
+ * _transport_delete_port - helper function to removing a port
+ * @ioc: per adapter object
+ * @mpt2sas_port: mpt2sas per port object
+ *
+ * Returns nothing.
+ */
+static void
+_transport_delete_port(struct MPT2SAS_ADAPTER *ioc,
+	struct _sas_port *mpt2sas_port)
+{
+	u64 sas_address = mpt2sas_port->remote_identify.sas_address;
+	enum sas_device_type device_type =
+	    mpt2sas_port->remote_identify.device_type;
+
+	dev_printk(KERN_INFO, &mpt2sas_port->port->dev,
+	    "remove: sas_addr(0x%016llx)\n",
+	    (unsigned long long) sas_address);
+
+	ioc->logging_level |= MPT_DEBUG_TRANSPORT;
+	if (device_type == SAS_END_DEVICE)
+		mpt2sas_device_remove(ioc, sas_address);
+	else if (device_type == SAS_EDGE_EXPANDER_DEVICE ||
+	    device_type == SAS_FANOUT_EXPANDER_DEVICE)
+		mpt2sas_expander_remove(ioc, sas_address);
+	ioc->logging_level &= ~MPT_DEBUG_TRANSPORT;
+}
 
 /**
- * _transport_delete_duplicate_port - (see below description)
+ * _transport_delete_phy - helper function to removing single phy from port
  * @ioc: per adapter object
- * @sas_node: sas node object (either expander or sas host)
- * @sas_address: sas address of device being added
- * @phy_num: phy number
+ * @mpt2sas_port: mpt2sas per port object
+ * @mpt2sas_phy: mpt2sas per phy object
  *
- * This function is called when attempting to add a new port that is claiming
- * the same phy resources already in use by another port.  If we don't release
- * the claimed phy resources, the sas transport layer will hang from the BUG
- * in sas_port_add_phy.
+ * Returns nothing.
+ */
+static void
+_transport_delete_phy(struct MPT2SAS_ADAPTER *ioc,
+	struct _sas_port *mpt2sas_port, struct _sas_phy *mpt2sas_phy)
+{
+	u64 sas_address = mpt2sas_port->remote_identify.sas_address;
+
+	dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev,
+	    "remove: sas_addr(0x%016llx), phy(%d)\n",
+	    (unsigned long long) sas_address, mpt2sas_phy->phy_id);
+
+	list_del(&mpt2sas_phy->port_siblings);
+	mpt2sas_port->num_phys--;
+	sas_port_delete_phy(mpt2sas_port->port, mpt2sas_phy->phy);
+	mpt2sas_phy->phy_belongs_to_port = 0;
+}
+
+/**
+ * _transport_add_phy - helper function to adding single phy to port
+ * @ioc: per adapter object
+ * @mpt2sas_port: mpt2sas per port object
+ * @mpt2sas_phy: mpt2sas per phy object
  *
- * The reason we would hit this issue is becuase someone is changing the
- * sas address of a device on the fly, meanwhile controller firmware sends
- * EVENTs out of order when removing the previous instance of the device.
+ * Returns nothing.
  */
 static void
-_transport_delete_duplicate_port(struct MPT2SAS_ADAPTER *ioc,
-    struct _sas_node *sas_node, u64 sas_address, int phy_num)
+_transport_add_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_port *mpt2sas_port,
+	struct _sas_phy *mpt2sas_phy)
 {
-	struct _sas_port *mpt2sas_port, *mpt2sas_port_duplicate;
-	struct _sas_phy *mpt2sas_phy;
+	u64 sas_address = mpt2sas_port->remote_identify.sas_address;
 
-	printk(MPT2SAS_ERR_FMT "new device located at sas_addr(0x%016llx), "
-	    "phy_id(%d)\n", ioc->name, (unsigned long long)sas_address,
-	    phy_num);
+	dev_printk(KERN_INFO, &mpt2sas_phy->phy->dev,
+	    "add: sas_addr(0x%016llx), phy(%d)\n", (unsigned long long)
+	    sas_address, mpt2sas_phy->phy_id);
 
-	mpt2sas_port_duplicate = NULL;
-	list_for_each_entry(mpt2sas_port, &sas_node->sas_port_list, port_list) {
-		dev_printk(KERN_ERR, &mpt2sas_port->port->dev,
-		    "existing device at sas_addr(0x%016llx), num_phys(%d)\n",
-		    (unsigned long long)
-		    mpt2sas_port->remote_identify.sas_address,
-		    mpt2sas_port->num_phys);
-		list_for_each_entry(mpt2sas_phy, &mpt2sas_port->phy_list,
+	list_add_tail(&mpt2sas_phy->port_siblings, &mpt2sas_port->phy_list);
+	mpt2sas_port->num_phys++;
+	sas_port_add_phy(mpt2sas_port->port, mpt2sas_phy->phy);
+	mpt2sas_phy->phy_belongs_to_port = 1;
+}
+
+/**
+ * _transport_add_phy_to_an_existing_port - adding new phy to existing port
+ * @ioc: per adapter object
+ * @sas_node: sas node object (either expander or sas host)
+ * @mpt2sas_phy: mpt2sas per phy object
+ * @sas_address: sas address of device/expander were phy needs to be added to
+ *
+ * Returns nothing.
+ */
+static void
+_transport_add_phy_to_an_existing_port(struct MPT2SAS_ADAPTER *ioc,
+struct _sas_node *sas_node, struct _sas_phy *mpt2sas_phy, u64 sas_address)
+{
+	struct _sas_port *mpt2sas_port;
+	struct _sas_phy *phy_srch;
+
+	if (mpt2sas_phy->phy_belongs_to_port == 1)
+		return;
+
+	list_for_each_entry(mpt2sas_port, &sas_node->sas_port_list,
+	    port_list) {
+		if (mpt2sas_port->remote_identify.sas_address !=
+		    sas_address)
+			continue;
+		list_for_each_entry(phy_srch, &mpt2sas_port->phy_list,
 		    port_siblings) {
-			dev_printk(KERN_ERR, &mpt2sas_phy->phy->dev,
-			    "phy_number(%d)\n", mpt2sas_phy->phy_id);
-			if (mpt2sas_phy->phy_id == phy_num)
-				mpt2sas_port_duplicate = mpt2sas_port;
+			if (phy_srch == mpt2sas_phy)
+				return;
 		}
+		_transport_add_phy(ioc, mpt2sas_port, mpt2sas_phy);
+			return;
 	}
 
-	if (!mpt2sas_port_duplicate)
+}
+
+/**
+ * _transport_del_phy_from_an_existing_port - delete phy from existing port
+ * @ioc: per adapter object
+ * @sas_node: sas node object (either expander or sas host)
+ * @mpt2sas_phy: mpt2sas per phy object
+ *
+ * Returns nothing.
+ */
+static void
+_transport_del_phy_from_an_existing_port(struct MPT2SAS_ADAPTER *ioc,
+	struct _sas_node *sas_node, struct _sas_phy *mpt2sas_phy)
+{
+	struct _sas_port *mpt2sas_port, *next;
+	struct _sas_phy *phy_srch;
+
+	if (mpt2sas_phy->phy_belongs_to_port == 0)
 		return;
 
-	dev_printk(KERN_ERR, &mpt2sas_port_duplicate->port->dev,
-	    "deleting duplicate device at sas_addr(0x%016llx), phy(%d)!!!!\n",
-	    (unsigned long long)
-	    mpt2sas_port_duplicate->remote_identify.sas_address, phy_num);
-	ioc->logging_level |= MPT_DEBUG_TRANSPORT;
-	mpt2sas_transport_port_remove(ioc,
-	    mpt2sas_port_duplicate->remote_identify.sas_address,
-	    sas_node->sas_address);
-	ioc->logging_level &= ~MPT_DEBUG_TRANSPORT;
+	list_for_each_entry_safe(mpt2sas_port, next, &sas_node->sas_port_list,
+	    port_list) {
+		list_for_each_entry(phy_srch, &mpt2sas_port->phy_list,
+		    port_siblings) {
+			if (phy_srch != mpt2sas_phy)
+				continue;
+			if (mpt2sas_port->num_phys == 1)
+				_transport_delete_port(ioc, mpt2sas_port);
+			else
+				_transport_delete_phy(ioc, mpt2sas_port,
+				    mpt2sas_phy);
+			return;
+		}
+	}
 }
 
 /**
@@ -537,11 +624,13 @@ _transport_sanity_check(struct MPT2SAS_ADAPTER *ioc, struct _sas_node *sas_node,
 {
 	int i;
 
-	for (i = 0; i < sas_node->num_phys; i++)
-		if (sas_node->phy[i].remote_identify.sas_address == sas_address)
-			if (sas_node->phy[i].phy_belongs_to_port)
-				_transport_delete_duplicate_port(ioc, sas_node,
-					sas_address, i);
+	for (i = 0; i < sas_node->num_phys; i++) {
+		if (sas_node->phy[i].remote_identify.sas_address != sas_address)
+			continue;
+		if (sas_node->phy[i].phy_belongs_to_port == 1)
+			_transport_del_phy_from_an_existing_port(ioc, sas_node,
+			    &sas_node->phy[i]);
+	}
 }
 
 /**
@@ -905,10 +994,12 @@ mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc,
 
 	mpt2sas_phy = &sas_node->phy[phy_number];
 	mpt2sas_phy->attached_handle = handle;
-	if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5))
+	if (handle && (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)) {
 		_transport_set_identify(ioc, handle,
 		    &mpt2sas_phy->remote_identify);
-	else
+		_transport_add_phy_to_an_existing_port(ioc, sas_node,
+		    mpt2sas_phy, mpt2sas_phy->remote_identify.sas_address);
+	} else
 		memset(&mpt2sas_phy->remote_identify, 0 , sizeof(struct
 		    sas_identify));
 
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index d013a2aa2fd..46cc3825638 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -8029,7 +8029,7 @@ static int ncr53c8xx_slave_configure(struct scsi_device *device)
 	return 0;
 }
 
-static int ncr53c8xx_queue_command (struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+static int ncr53c8xx_queue_command_lck (struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
      struct ncb *np = ((struct host_data *) cmd->device->host->hostdata)->ncb;
      unsigned long flags;
@@ -8068,6 +8068,8 @@ printk("ncr53c8xx : command successfully queued\n");
      return sts;
 }
 
+static DEF_SCSI_QCMD(ncr53c8xx_queue_command)
+
 irqreturn_t ncr53c8xx_intr(int irq, void *dev_id)
 {
      unsigned long flags;
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 4c1e5454520..6b8b021400f 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -196,8 +196,7 @@ static void __exit    exit_nsp32  (void);
 static int         nsp32_proc_info   (struct Scsi_Host *, char *, char **, off_t, int, int);
 
 static int         nsp32_detect      (struct pci_dev *pdev);
-static int         nsp32_queuecommand(struct scsi_cmnd *,
-		void (*done)(struct scsi_cmnd *));
+static int         nsp32_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static const char *nsp32_info        (struct Scsi_Host *);
 static int         nsp32_release     (struct Scsi_Host *);
 
@@ -909,7 +908,7 @@ static int nsp32_setup_sg_table(struct scsi_cmnd *SCpnt)
 	return TRUE;
 }
 
-static int nsp32_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+static int nsp32_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	nsp32_hw_data *data = (nsp32_hw_data *)SCpnt->device->host->hostdata;
 	nsp32_target *target;
@@ -1050,6 +1049,8 @@ static int nsp32_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_
 	return 0;
 }
 
+static DEF_SCSI_QCMD(nsp32_queuecommand)
+
 /* initialize asic */
 static int nsp32hw_init(nsp32_hw_data *data)
 {
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 0433ea6f27c..b37c8a3c1bb 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -951,8 +951,8 @@ static int _osd_req_finalize_cdb_cont(struct osd_request *or, const u8 *cap_key)
 	/* create a bio for continuation segment */
 	bio = bio_map_kern(req_q, or->cdb_cont.buff, or->cdb_cont.total_bytes,
 			   GFP_KERNEL);
-	if (unlikely(!bio))
-		return -ENOMEM;
+	if (IS_ERR(bio))
+		return PTR_ERR(bio);
 
 	bio->bi_rw |= REQ_WRITE;
 
diff --git a/drivers/scsi/pas16.h b/drivers/scsi/pas16.h
index 8dc5b1a5f5d..a04281cace2 100644
--- a/drivers/scsi/pas16.h
+++ b/drivers/scsi/pas16.h
@@ -118,7 +118,7 @@ static int pas16_abort(Scsi_Cmnd *);
 static int pas16_biosparam(struct scsi_device *, struct block_device *,
 			   sector_t, int*);
 static int pas16_detect(struct scsi_host_template *);
-static int pas16_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int pas16_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int pas16_bus_reset(Scsi_Cmnd *);
 
 #ifndef CMD_PER_LUN
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 9326c2c1488..be3f33d31a9 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -184,7 +184,7 @@ static void nsp_scsi_done(struct scsi_cmnd *SCpnt)
 	SCpnt->scsi_done(SCpnt);
 }
 
-static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
+static int nsp_queuecommand_lck(struct scsi_cmnd *SCpnt,
 			    void (*done)(struct scsi_cmnd *))
 {
 #ifdef NSP_DEBUG
@@ -264,6 +264,8 @@ static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(nsp_queuecommand)
+
 /*
  * setup PIO FIFO transfer mode and enable/disable to data out
  */
diff --git a/drivers/scsi/pcmcia/nsp_cs.h b/drivers/scsi/pcmcia/nsp_cs.h
index d68c9f267c5..7fc9a9d0a44 100644
--- a/drivers/scsi/pcmcia/nsp_cs.h
+++ b/drivers/scsi/pcmcia/nsp_cs.h
@@ -299,8 +299,7 @@ static        int        nsp_proc_info  (
 					 off_t   offset,
 					 int     length,
 					 int     inout);
-static int nsp_queuecommand(struct scsi_cmnd *SCpnt,
-			    void (* done)(struct scsi_cmnd *SCpnt));
+static int nsp_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *SCpnt);
 
 /* Error handler */
 /*static int nsp_eh_abort       (struct scsi_cmnd *SCpnt);*/
diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c
index 0ae27cb5cd6..8552296edaa 100644
--- a/drivers/scsi/pcmcia/sym53c500_cs.c
+++ b/drivers/scsi/pcmcia/sym53c500_cs.c
@@ -547,7 +547,7 @@ SYM53C500_info(struct Scsi_Host *SChost)
 }
 
 static int 
-SYM53C500_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
+SYM53C500_queue_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 {
 	int i;
 	int port_base = SCpnt->device->host->io_port;
@@ -583,6 +583,8 @@ SYM53C500_queue(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(SYM53C500_queue)
+
 static int 
 SYM53C500_host_reset(struct scsi_cmnd *SCpnt)
 {
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 8e38ca8cd10..7f064f9ca82 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -50,7 +50,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
-#include <linux/smp_lock.h>
 #include <scsi/libsas.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/sas_ata.h>
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index cf89091e4c3..300d59f389d 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -62,6 +62,7 @@
 static unsigned int pmcraid_debug_log;
 static unsigned int pmcraid_disable_aen;
 static unsigned int pmcraid_log_level = IOASC_LOG_LEVEL_MUST;
+static unsigned int pmcraid_enable_msix;
 
 /*
  * Data structures to support multiple adapters by the LLD.
@@ -3478,7 +3479,7 @@ static int pmcraid_copy_sglist(
  *	  SCSI_MLQUEUE_DEVICE_BUSY if device is busy
  *	  SCSI_MLQUEUE_HOST_BUSY if host is busy
  */
-static int pmcraid_queuecommand(
+static int pmcraid_queuecommand_lck(
 	struct scsi_cmnd *scsi_cmd,
 	void (*done) (struct scsi_cmnd *)
 )
@@ -3584,6 +3585,8 @@ static int pmcraid_queuecommand(
 	return rc;
 }
 
+static DEF_SCSI_QCMD(pmcraid_queuecommand)
+
 /**
  * pmcraid_open -char node "open" entry, allowed only users with admin access
  */
@@ -4689,7 +4692,8 @@ pmcraid_register_interrupt_handler(struct pmcraid_instance *pinstance)
 	int rc;
 	struct pci_dev *pdev = pinstance->pdev;
 
-	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+	if ((pmcraid_enable_msix) &&
+		(pci_find_capability(pdev, PCI_CAP_ID_MSIX))) {
 		int num_hrrq = PMCRAID_NUM_MSIX_VECTORS;
 		struct msix_entry entries[PMCRAID_NUM_MSIX_VECTORS];
 		int i;
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 1134279604e..4db210d9394 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -42,7 +42,7 @@
  */
 #define PMCRAID_DRIVER_NAME		"PMC MaxRAID"
 #define PMCRAID_DEVFILE			"pmcsas"
-#define PMCRAID_DRIVER_VERSION		"2.0.3"
+#define PMCRAID_DRIVER_VERSION		"1.0.3"
 #define PMCRAID_DRIVER_DATE		__DATE__
 
 #define PMCRAID_FW_VERSION_1		0x002
@@ -333,11 +333,9 @@ struct pmcraid_config_table_entry {
 	__u8  lun[PMCRAID_LUN_LEN];
 } __attribute__((packed, aligned(4)));
 
-/* extended configuration table sizes are of 64 bytes in size */
-#define PMCRAID_CFGTE_EXT_SIZE	32
+/* extended configuration table sizes are also of 32 bytes in size */
 struct pmcraid_config_table_entry_ext {
 	struct pmcraid_config_table_entry cfgte;
-	__u8  cfgte_ext[PMCRAID_CFGTE_EXT_SIZE];
 };
 
 /* resource types (config_table_entry.resource_type values) */
diff --git a/drivers/scsi/ppa.c b/drivers/scsi/ppa.c
index 7bc2d796e40..d164c963936 100644
--- a/drivers/scsi/ppa.c
+++ b/drivers/scsi/ppa.c
@@ -798,7 +798,7 @@ static int ppa_engine(ppa_struct *dev, struct scsi_cmnd *cmd)
 	return 0;
 }
 
-static int ppa_queuecommand(struct scsi_cmnd *cmd,
+static int ppa_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done) (struct scsi_cmnd *))
 {
 	ppa_struct *dev = ppa_dev(cmd->device->host);
@@ -821,6 +821,8 @@ static int ppa_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(ppa_queuecommand)
+
 /*
  * Apparently the disk->capacity attribute is off by 1 sector 
  * for all disk drives.  We add the one here, but it should really
diff --git a/drivers/scsi/ps3rom.c b/drivers/scsi/ps3rom.c
index 92ffbb51049..cd178b9e40c 100644
--- a/drivers/scsi/ps3rom.c
+++ b/drivers/scsi/ps3rom.c
@@ -211,7 +211,7 @@ static int ps3rom_write_request(struct ps3_storage_device *dev,
 	return 0;
 }
 
-static int ps3rom_queuecommand(struct scsi_cmnd *cmd,
+static int ps3rom_queuecommand_lck(struct scsi_cmnd *cmd,
 			       void (*done)(struct scsi_cmnd *))
 {
 	struct ps3rom_private *priv = shost_priv(cmd->device->host);
@@ -260,6 +260,8 @@ static int ps3rom_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(ps3rom_queuecommand)
+
 static int decode_lv1_status(u64 status, unsigned char *sense_key,
 			     unsigned char *asc, unsigned char *ascq)
 {
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index b8166ecfd0e..5dec684bf01 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -727,7 +727,7 @@ qla1280_info(struct Scsi_Host *host)
  * context which is a big NO! NO!.
  **************************************************************************/
 static int
-qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
+qla1280_queuecommand_lck(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct scsi_qla_host *ha = (struct scsi_qla_host *)host->hostdata;
@@ -756,6 +756,8 @@ qla1280_queuecommand(struct scsi_cmnd *cmd, void (*fn)(struct scsi_cmnd *))
 	return status;
 }
 
+static DEF_SCSI_QCMD(qla1280_queuecommand)
+
 enum action {
 	ABORT_COMMAND,
 	DEVICE_RESET,
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index bc8194f7462..44578b56ad0 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1309,6 +1309,31 @@ qla2x00_fabric_param_show(struct device *dev, struct device_attribute *attr,
 }
 
 static ssize_t
+qla2x00_thermal_temp_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	scsi_qla_host_t *vha = shost_priv(class_to_shost(dev));
+	int rval = QLA_FUNCTION_FAILED;
+	uint16_t temp, frac;
+
+	if (!vha->hw->flags.thermal_supported)
+		return snprintf(buf, PAGE_SIZE, "\n");
+
+	temp = frac = 0;
+	if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
+	    test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags))
+		DEBUG2_3_11(printk(KERN_WARNING
+		    "%s(%ld): isp reset in progress.\n",
+		    __func__, vha->host_no));
+	else if (!vha->hw->flags.eeh_busy)
+		rval = qla2x00_get_thermal_temp(vha, &temp, &frac);
+	if (rval != QLA_SUCCESS)
+		temp = frac = 0;
+
+	return snprintf(buf, PAGE_SIZE, "%d.%02d\n", temp, frac);
+}
+
+static ssize_t
 qla2x00_fw_state_show(struct device *dev, struct device_attribute *attr,
     char *buf)
 {
@@ -1366,6 +1391,7 @@ static DEVICE_ATTR(vn_port_mac_address, S_IRUGO,
 		   qla2x00_vn_port_mac_address_show, NULL);
 static DEVICE_ATTR(fabric_param, S_IRUGO, qla2x00_fabric_param_show, NULL);
 static DEVICE_ATTR(fw_state, S_IRUGO, qla2x00_fw_state_show, NULL);
+static DEVICE_ATTR(thermal_temp, S_IRUGO, qla2x00_thermal_temp_show, NULL);
 
 struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_driver_version,
@@ -1394,6 +1420,7 @@ struct device_attribute *qla2x00_host_attrs[] = {
 	&dev_attr_fabric_param,
 	&dev_attr_fw_state,
 	&dev_attr_optrom_gold_fw_version,
+	&dev_attr_thermal_temp,
 	NULL,
 };
 
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index 31a4121a2be..903b0586ded 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -103,7 +103,7 @@ qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job)
 
 	bsg_job->reply->reply_payload_rcv_len = 0;
 
-	if (!IS_QLA24XX_TYPE(ha) || !IS_QLA25XX(ha)) {
+	if (!(IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha))) {
 		ret = -EINVAL;
 		goto exit_fcp_prio_cfg;
 	}
@@ -753,7 +753,7 @@ qla2x00_process_loopback(struct fc_bsg_job *bsg_job)
 			command_sent = INT_DEF_LB_LOOPBACK_CMD;
 			rval = qla2x00_loopback_test(vha, &elreq, response);
 
-			if (new_config[1]) {
+			if (new_config[0]) {
 				/* Revert back to original port config
 				 * Also clear internal loopback
 				 */
@@ -1512,6 +1512,7 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job)
 				if (((sp_bsg->type == SRB_CT_CMD) ||
 					(sp_bsg->type == SRB_ELS_CMD_HST))
 					&& (sp_bsg->u.bsg_job == bsg_job)) {
+					spin_unlock_irqrestore(&ha->hardware_lock, flags);
 					if (ha->isp_ops->abort_command(sp)) {
 						DEBUG2(qla_printk(KERN_INFO, ha,
 						    "scsi(%ld): mbx "
@@ -1527,6 +1528,7 @@ qla24xx_bsg_timeout(struct fc_bsg_job *bsg_job)
 						bsg_job->req->errors =
 						bsg_job->reply->result = 0;
 					}
+					spin_lock_irqsave(&ha->hardware_lock, flags);
 					goto done;
 				}
 			}
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 3a22effced5..ccfc8e78be2 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2409,7 +2409,6 @@ struct qla_hw_data {
 		uint32_t	enable_target_reset	:1;
 		uint32_t	enable_lip_full_login	:1;
 		uint32_t	enable_led_scheme	:1;
-		uint32_t	inta_enabled		:1;
 		uint32_t	msi_enabled		:1;
 		uint32_t	msix_enabled		:1;
 		uint32_t	disable_serdes		:1;
@@ -2426,6 +2425,9 @@ struct qla_hw_data {
 		uint32_t	disable_msix_handshake	:1;
 		uint32_t	fcp_prio_enabled	:1;
 		uint32_t	fw_hung	:1;
+		uint32_t        quiesce_owner:1;
+		uint32_t	thermal_supported:1;
+		/* 26 bits */
 	} flags;
 
 	/* This spinlock is used to protect "io transactions", you must
@@ -2864,6 +2866,7 @@ typedef struct scsi_qla_host {
 #define ISP_UNRECOVERABLE	17
 #define FCOE_CTX_RESET_NEEDED	18	/* Initiate FCoE context reset */
 #define MPI_RESET_NEEDED	19	/* Initiate MPI FW reset */
+#define ISP_QUIESCE_NEEDED	20	/* Driver need some quiescence */
 
 	uint32_t	device_flags;
 #define SWITCH_FOUND		BIT_0
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 9382a816c13..89e900adb67 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -36,6 +36,7 @@ extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *);
 extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *);
 extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *);
 
+extern int qla2x00_perform_loop_resync(scsi_qla_host_t *);
 extern int qla2x00_loop_resync(scsi_qla_host_t *);
 
 extern int qla2x00_fabric_login(scsi_qla_host_t *, fc_port_t *, uint16_t *);
@@ -45,12 +46,15 @@ extern void qla2x00_update_fcports(scsi_qla_host_t *);
 
 extern int qla2x00_abort_isp(scsi_qla_host_t *);
 extern void qla2x00_abort_isp_cleanup(scsi_qla_host_t *);
+extern void qla82xx_quiescent_state_cleanup(scsi_qla_host_t *);
 
 extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
 
 extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
 extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);
 
+extern int qla2x00_get_thermal_temp(scsi_qla_host_t *, uint16_t *, uint16_t *);
+
 extern void qla84xx_put_chip(struct scsi_qla_host *);
 
 extern int qla2x00_async_login(struct scsi_qla_host *, fc_port_t *,
@@ -68,6 +72,7 @@ extern void qla2x00_async_adisc_done(struct scsi_qla_host *, fc_port_t *,
 extern void qla2x00_async_tm_cmd_done(struct scsi_qla_host *, fc_port_t *,
 	struct srb_iocb *);
 extern void *qla2x00_alloc_iocbs(struct scsi_qla_host *, srb_t *);
+extern int qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *, fc_port_t *);
 
 extern fc_port_t *
 qla2x00_alloc_fcport(scsi_qla_host_t *, gfp_t );
@@ -90,7 +95,6 @@ extern int ql2xfwloadbin;
 extern int ql2xetsenable;
 extern int ql2xshiftctondsd;
 extern int ql2xdbwr;
-extern int ql2xdontresethba;
 extern int ql2xasynctmfenable;
 extern int ql2xgffidenable;
 extern int ql2xenabledif;
@@ -549,9 +553,11 @@ extern void qla82xx_rom_unlock(struct qla_hw_data *);
 
 /* ISP 8021 IDC */
 extern void qla82xx_clear_drv_active(struct qla_hw_data *);
+extern uint32_t  qla82xx_wait_for_state_change(scsi_qla_host_t *, uint32_t);
 extern int qla82xx_idc_lock(struct qla_hw_data *);
 extern void qla82xx_idc_unlock(struct qla_hw_data *);
 extern int qla82xx_device_state_handler(scsi_qla_host_t *);
+extern void qla82xx_clear_qsnt_ready(scsi_qla_host_t *);
 
 extern void qla2x00_set_model_info(scsi_qla_host_t *, uint8_t *,
     size_t, char *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 259f5113749..f948e1a73ae 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -498,6 +498,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
 	vha->flags.reset_active = 0;
 	ha->flags.pci_channel_io_perm_failure = 0;
 	ha->flags.eeh_busy = 0;
+	ha->flags.thermal_supported = 1;
 	atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 	atomic_set(&vha->loop_state, LOOP_DOWN);
 	vha->device_flags = DFLG_NO_CABLE;
@@ -2023,6 +2024,7 @@ qla2x00_configure_hba(scsi_qla_host_t *vha)
 	    &loop_id, &al_pa, &area, &domain, &topo, &sw_cap);
 	if (rval != QLA_SUCCESS) {
 		if (LOOP_TRANSITION(vha) || atomic_read(&ha->loop_down_timer) ||
+		    IS_QLA8XXX_TYPE(ha) ||
 		    (rval == QLA_COMMAND_ERROR && loop_id == 0x7)) {
 			DEBUG2(printk("%s(%ld) Loop is in a transition state\n",
 			    __func__, vha->host_no));
@@ -2928,6 +2930,7 @@ qla2x00_update_fcport(scsi_qla_host_t *vha, fc_port_t *fcport)
 	fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);
 
 	qla2x00_iidma_fcport(vha, fcport);
+	qla24xx_update_fcport_fcp_prio(vha, fcport);
 	qla2x00_reg_remote_port(vha, fcport);
 	atomic_set(&fcport->state, FCS_ONLINE);
 }
@@ -3844,6 +3847,37 @@ qla2x00_loop_resync(scsi_qla_host_t *vha)
 	return (rval);
 }
 
+/*
+* qla2x00_perform_loop_resync
+* Description: This function will set the appropriate flags and call
+*              qla2x00_loop_resync. If successful loop will be resynced
+* Arguments : scsi_qla_host_t pointer
+* returm    : Success or Failure
+*/
+
+int qla2x00_perform_loop_resync(scsi_qla_host_t *ha)
+{
+	int32_t rval = 0;
+
+	if (!test_and_set_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags)) {
+		/*Configure the flags so that resync happens properly*/
+		atomic_set(&ha->loop_down_timer, 0);
+		if (!(ha->device_flags & DFLG_NO_CABLE)) {
+			atomic_set(&ha->loop_state, LOOP_UP);
+			set_bit(LOCAL_LOOP_UPDATE, &ha->dpc_flags);
+			set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
+			set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
+
+			rval = qla2x00_loop_resync(ha);
+		} else
+			atomic_set(&ha->loop_state, LOOP_DEAD);
+
+		clear_bit(LOOP_RESYNC_ACTIVE, &ha->dpc_flags);
+	}
+
+	return rval;
+}
+
 void
 qla2x00_update_fcports(scsi_qla_host_t *base_vha)
 {
@@ -3857,7 +3891,7 @@ qla2x00_update_fcports(scsi_qla_host_t *base_vha)
 	list_for_each_entry(vha, &base_vha->hw->vp_list, list) {
 		atomic_inc(&vha->vref_count);
 		list_for_each_entry(fcport, &vha->vp_fcports, list) {
-			if (fcport && fcport->drport &&
+			if (fcport->drport &&
 			    atomic_read(&fcport->state) != FCS_UNCONFIGURED) {
 				spin_unlock_irqrestore(&ha->vport_slock, flags);
 
@@ -3871,11 +3905,43 @@ qla2x00_update_fcports(scsi_qla_host_t *base_vha)
 	spin_unlock_irqrestore(&ha->vport_slock, flags);
 }
 
+/*
+* qla82xx_quiescent_state_cleanup
+* Description: This function will block the new I/Os
+*              Its not aborting any I/Os as context
+*              is not destroyed during quiescence
+* Arguments: scsi_qla_host_t
+* return   : void
+*/
+void
+qla82xx_quiescent_state_cleanup(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+	struct scsi_qla_host *vp;
+
+	qla_printk(KERN_INFO, ha,
+			"Performing ISP error recovery - ha= %p.\n", ha);
+
+	atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
+	if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
+		atomic_set(&vha->loop_state, LOOP_DOWN);
+		qla2x00_mark_all_devices_lost(vha, 0);
+		list_for_each_entry(vp, &ha->vp_list, list)
+			qla2x00_mark_all_devices_lost(vha, 0);
+	} else {
+		if (!atomic_read(&vha->loop_down_timer))
+			atomic_set(&vha->loop_down_timer,
+					LOOP_DOWN_TIME);
+	}
+	/* Wait for pending cmds to complete */
+	qla2x00_eh_wait_for_pending_commands(vha, 0, 0, WAIT_HOST);
+}
+
 void
 qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 {
 	struct qla_hw_data *ha = vha->hw;
-	struct scsi_qla_host *vp, *base_vha = pci_get_drvdata(ha->pdev);
+	struct scsi_qla_host *vp;
 	unsigned long flags;
 
 	vha->flags.online = 0;
@@ -3896,7 +3962,7 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 		qla2x00_mark_all_devices_lost(vha, 0);
 
 		spin_lock_irqsave(&ha->vport_slock, flags);
-		list_for_each_entry(vp, &base_vha->hw->vp_list, list) {
+		list_for_each_entry(vp, &ha->vp_list, list) {
 			atomic_inc(&vp->vref_count);
 			spin_unlock_irqrestore(&ha->vport_slock, flags);
 
@@ -5410,7 +5476,7 @@ qla81xx_update_fw_options(scsi_qla_host_t *vha)
  *	the tag (priority) value is returned.
  *
  * Input:
- *	ha = adapter block po
+ *	vha = scsi host structure pointer.
  *	fcport = port structure pointer.
  *
  * Return:
@@ -5504,7 +5570,7 @@ qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
  *	Activates fcp priority for the logged in fc port
  *
  * Input:
- *	ha = adapter block pointer.
+ *	vha = scsi host structure pointer.
  *	fcp = port structure pointer.
  *
  * Return:
@@ -5514,25 +5580,24 @@ qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
  *	Kernel context.
  */
 int
-qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *ha, fc_port_t *fcport)
+qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
 {
 	int ret;
 	uint8_t priority;
 	uint16_t mb[5];
 
-	if (atomic_read(&fcport->state) == FCS_UNCONFIGURED ||
-		fcport->port_type != FCT_TARGET ||
-		fcport->loop_id == FC_NO_LOOP_ID)
+	if (fcport->port_type != FCT_TARGET ||
+	    fcport->loop_id == FC_NO_LOOP_ID)
 		return QLA_FUNCTION_FAILED;
 
-	priority = qla24xx_get_fcp_prio(ha, fcport);
-	ret = qla24xx_set_fcp_prio(ha, fcport->loop_id, priority, mb);
+	priority = qla24xx_get_fcp_prio(vha, fcport);
+	ret = qla24xx_set_fcp_prio(vha, fcport->loop_id, priority, mb);
 	if (ret == QLA_SUCCESS)
 		fcport->fcp_prio = priority;
 	else
 		DEBUG2(printk(KERN_WARNING
 			"scsi(%ld): Unable to activate fcp priority, "
-			" ret=0x%x\n", ha->host_no, ret));
+			" ret=0x%x\n", vha->host_no, ret));
 
 	return  ret;
 }
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 5f94430b42f..4c1ba6263eb 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -1061,6 +1061,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 		fcp_cmnd->additional_cdb_len |= 2;
 
 	int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
+	host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
 	memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
 	cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
 	cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 1f06ddd9bdd..d17ed9a94a0 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -321,6 +321,7 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
 	struct qla_hw_data *ha = vha->hw;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 	struct device_reg_24xx __iomem *reg24 = &ha->iobase->isp24;
+	struct device_reg_82xx __iomem *reg82 = &ha->iobase->isp82;
 	uint32_t	rscn_entry, host_pid;
 	uint8_t		rscn_queue_index;
 	unsigned long	flags;
@@ -498,6 +499,7 @@ skip_rio:
 
 	case MBA_LOOP_DOWN:		/* Loop Down Event */
 		mbx = IS_QLA81XX(ha) ? RD_REG_WORD(&reg24->mailbox4) : 0;
+		mbx = IS_QLA82XX(ha) ? RD_REG_WORD(&reg82->mailbox_out[4]) : mbx;
 		DEBUG2(printk("scsi(%ld): Asynchronous LOOP DOWN "
 		    "(%x %x %x %x).\n", vha->host_no, mb[1], mb[2], mb[3],
 		    mbx));
@@ -2491,14 +2493,15 @@ skip_msix:
 skip_msi:
 
 	ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler,
-	    IRQF_SHARED, QLA2XXX_DRIVER_NAME, rsp);
+	    ha->flags.msi_enabled ? 0 : IRQF_SHARED,
+	    QLA2XXX_DRIVER_NAME, rsp);
 	if (ret) {
 		qla_printk(KERN_WARNING, ha,
 		    "Failed to reserve interrupt %d already in use.\n",
 		    ha->pdev->irq);
 		goto fail;
 	}
-	ha->flags.inta_enabled = 1;
+
 clear_risc_ints:
 
 	/*
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index effd8a1403d..e473e9fb363 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -4125,7 +4125,7 @@ qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
 		return QLA_FUNCTION_FAILED;
 
 	DEBUG11(printk(KERN_INFO
-	    "%s(%ld): entered.\n", __func__, ha->host_no));
+	    "%s(%ld): entered.\n", __func__, vha->host_no));
 
 	mcp->mb[0] = MBC_PORT_PARAMS;
 	mcp->mb[1] = loop_id;
@@ -4160,6 +4160,71 @@ qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
 }
 
 int
+qla2x00_get_thermal_temp(scsi_qla_host_t *vha, uint16_t *temp, uint16_t *frac)
+{
+	int rval;
+	mbx_cmd_t mc;
+	mbx_cmd_t *mcp = &mc;
+	struct qla_hw_data *ha = vha->hw;
+
+	DEBUG11(printk(KERN_INFO "%s(%ld): entered.\n", __func__, ha->host_no));
+
+	/* High bits. */
+	mcp->mb[0] = MBC_READ_SFP;
+	mcp->mb[1] = 0x98;
+	mcp->mb[2] = 0;
+	mcp->mb[3] = 0;
+	mcp->mb[6] = 0;
+	mcp->mb[7] = 0;
+	mcp->mb[8] = 1;
+	mcp->mb[9] = 0x01;
+	mcp->mb[10] = BIT_13|BIT_0;
+	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk(KERN_WARNING
+		    "%s(%ld): failed=%x (%x).\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+		ha->flags.thermal_supported = 0;
+		goto fail;
+	}
+	*temp = mcp->mb[1] & 0xFF;
+
+	/* Low bits. */
+	mcp->mb[0] = MBC_READ_SFP;
+	mcp->mb[1] = 0x98;
+	mcp->mb[2] = 0;
+	mcp->mb[3] = 0;
+	mcp->mb[6] = 0;
+	mcp->mb[7] = 0;
+	mcp->mb[8] = 1;
+	mcp->mb[9] = 0x10;
+	mcp->mb[10] = BIT_13|BIT_0;
+	mcp->out_mb = MBX_10|MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+	mcp->in_mb = MBX_1|MBX_0;
+	mcp->tov = MBX_TOV_SECONDS;
+	mcp->flags = 0;
+	rval = qla2x00_mailbox_command(vha, mcp);
+	if (rval != QLA_SUCCESS) {
+		DEBUG2_3_11(printk(KERN_WARNING
+		    "%s(%ld): failed=%x (%x).\n", __func__,
+		    vha->host_no, rval, mcp->mb[0]));
+		ha->flags.thermal_supported = 0;
+		goto fail;
+	}
+	*frac = ((mcp->mb[1] & 0xFF) >> 6) * 25;
+
+	if (rval == QLA_SUCCESS)
+		DEBUG11(printk(KERN_INFO
+		    "%s(%ld): done.\n", __func__, ha->host_no));
+fail:
+	return rval;
+}
+
+int
 qla82xx_mbx_intr_enable(scsi_qla_host_t *vha)
 {
 	int rval;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 8d9edfb3980..fdb96a3584a 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1079,11 +1079,55 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 
 	/* Halt all the indiviual PEGs and other blocks of the ISP */
 	qla82xx_rom_lock(ha);
+
+	/* mask all niu interrupts */
+	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x40, 0xff);
+	/* disable xge rx/tx */
+	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x70000, 0x00);
+	/* disable xg1 rx/tx */
+	qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x80000, 0x00);
+
+	/* halt sre */
+	val = qla82xx_rd_32(ha, QLA82XX_CRB_SRE + 0x1000);
+	qla82xx_wr_32(ha, QLA82XX_CRB_SRE + 0x1000, val & (~(0x1)));
+
+	/* halt epg */
+	qla82xx_wr_32(ha, QLA82XX_CRB_EPG + 0x1300, 0x1);
+
+	/* halt timers */
+	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x0, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x8, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x10, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x18, 0x0);
+	qla82xx_wr_32(ha, QLA82XX_CRB_TIMER + 0x100, 0x0);
+
+	/* halt pegs */
+	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x3c, 1);
+	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_1 + 0x3c, 1);
+	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_2 + 0x3c, 1);
+	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_3 + 0x3c, 1);
+	qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c, 1);
+
+	/* big hammer */
+	msleep(1000);
 	if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
 		/* don't reset CAM block on reset */
 		qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff);
 	else
 		qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff);
+
+	/* reset ms */
+	val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
+	val |= (1 << 1);
+	qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
+	msleep(20);
+
+	/* unreset ms */
+	val = qla82xx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
+	val &= ~(1 << 1);
+	qla82xx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
+	msleep(20);
+
 	qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK));
 
 	/* Read the signature value from the flash.
@@ -1210,25 +1254,6 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 }
 
 static int
-qla82xx_check_for_bad_spd(struct qla_hw_data *ha)
-{
-	u32 val = 0;
-	val = qla82xx_rd_32(ha, BOOT_LOADER_DIMM_STATUS);
-	val &= QLA82XX_BOOT_LOADER_MN_ISSUE;
-	if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) {
-		qla_printk(KERN_INFO, ha,
-			"Memory DIMM SPD not programmed. "
-			" Assumed valid.\n");
-		return 1;
-	} else if (val) {
-		qla_printk(KERN_INFO, ha,
-			"Memory DIMM type incorrect.Info:%08X.\n", val);
-		return 2;
-	}
-	return 0;
-}
-
-static int
 qla82xx_pci_mem_write_2M(struct qla_hw_data *ha,
 		u64 off, void *data, int size)
 {
@@ -1293,11 +1318,6 @@ qla82xx_pci_mem_write_2M(struct qla_hw_data *ha,
 		word[startword+1] |= tmpw >> (sz[0] * 8);
 	}
 
-	/*
-	 * don't lock here - write_wx gets the lock if each time
-	 * write_lock_irqsave(&adapter->adapter_lock, flags);
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-	 */
 	for (i = 0; i < loop; i++) {
 		temp = off8 + (i << shift_amount);
 		qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_LO, temp);
@@ -1399,12 +1419,6 @@ qla82xx_pci_mem_read_2M(struct qla_hw_data *ha,
 	off0[1] = 0;
 	sz[1] = size - sz[0];
 
-	/*
-	 * don't lock here - write_wx gets the lock if each time
-	 * write_lock_irqsave(&adapter->adapter_lock, flags);
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-	 */
-
 	for (i = 0; i < loop; i++) {
 		temp = off8 + (i << shift_amount);
 		qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_LO, temp);
@@ -1437,11 +1451,6 @@ qla82xx_pci_mem_read_2M(struct qla_hw_data *ha,
 		}
 	}
 
-	/*
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-	 * write_unlock_irqrestore(&adapter->adapter_lock, flags);
-	 */
-
 	if (j >= MAX_CTL_CHECK)
 		return -1;
 
@@ -1872,7 +1881,6 @@ qla82xx_check_cmdpeg_state(struct qla_hw_data *ha)
 	qla_printk(KERN_INFO, ha,
 	    "Cmd Peg initialization failed: 0x%x.\n", val);
 
-	qla82xx_check_for_bad_spd(ha);
 	val = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_PEGTUNE_DONE);
 	read_lock(&ha->hw_lock);
 	qla82xx_wr_32(ha, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED);
@@ -2343,6 +2351,17 @@ qla82xx_set_qsnt_ready(struct qla_hw_data *ha)
 	qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, qsnt_state);
 }
 
+void
+qla82xx_clear_qsnt_ready(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+	uint32_t qsnt_state;
+
+	qsnt_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
+	qsnt_state &= ~(QLA82XX_DRVST_QSNT_RDY << (ha->portnum * 4));
+	qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, qsnt_state);
+}
+
 static int
 qla82xx_load_fw(scsi_qla_host_t *vha)
 {
@@ -2542,7 +2561,7 @@ qla2xx_build_scsi_type_6_iocbs(srb_t *sp, struct cmd_type_6 *cmd_pkt,
 			*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
 			*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
 			*cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg));
-			cur_seg++;
+			cur_seg = sg_next(cur_seg);
 			avail_dsds--;
 		}
 	}
@@ -2749,6 +2768,7 @@ sufficient_dsds:
 			goto queuing_error_fcp_cmnd;
 
 		int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
+		host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
 
 		/* build FCP_CMND IU */
 		memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
@@ -3260,6 +3280,104 @@ dev_ready:
 	return QLA_SUCCESS;
 }
 
+/*
+* qla82xx_need_qsnt_handler
+*    Code to start quiescence sequence
+*
+* Note:
+*      IDC lock must be held upon entry
+*
+* Return: void
+*/
+
+static void
+qla82xx_need_qsnt_handler(scsi_qla_host_t *vha)
+{
+	struct qla_hw_data *ha = vha->hw;
+	uint32_t dev_state, drv_state, drv_active;
+	unsigned long reset_timeout;
+
+	if (vha->flags.online) {
+		/*Block any further I/O and wait for pending cmnds to complete*/
+		qla82xx_quiescent_state_cleanup(vha);
+	}
+
+	/* Set the quiescence ready bit */
+	qla82xx_set_qsnt_ready(ha);
+
+	/*wait for 30 secs for other functions to ack */
+	reset_timeout = jiffies + (30 * HZ);
+
+	drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
+	drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
+	/* Its 2 that is written when qsnt is acked, moving one bit */
+	drv_active = drv_active << 0x01;
+
+	while (drv_state != drv_active) {
+
+		if (time_after_eq(jiffies, reset_timeout)) {
+			/* quiescence timeout, other functions didn't ack
+			 * changing the state to DEV_READY
+			 */
+			qla_printk(KERN_INFO, ha,
+			    "%s: QUIESCENT TIMEOUT\n", QLA2XXX_DRIVER_NAME);
+			qla_printk(KERN_INFO, ha,
+			    "DRV_ACTIVE:%d DRV_STATE:%d\n", drv_active,
+			    drv_state);
+			qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
+						QLA82XX_DEV_READY);
+			qla_printk(KERN_INFO, ha,
+			    "HW State: DEV_READY\n");
+			qla82xx_idc_unlock(ha);
+			qla2x00_perform_loop_resync(vha);
+			qla82xx_idc_lock(ha);
+
+			qla82xx_clear_qsnt_ready(vha);
+			return;
+		}
+
+		qla82xx_idc_unlock(ha);
+		msleep(1000);
+		qla82xx_idc_lock(ha);
+
+		drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE);
+		drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE);
+		drv_active = drv_active << 0x01;
+	}
+	dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+	/* everyone acked so set the state to DEV_QUIESCENCE */
+	if (dev_state == QLA82XX_DEV_NEED_QUIESCENT) {
+		qla_printk(KERN_INFO, ha, "HW State: DEV_QUIESCENT\n");
+		qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_QUIESCENT);
+	}
+}
+
+/*
+* qla82xx_wait_for_state_change
+*    Wait for device state to change from given current state
+*
+* Note:
+*     IDC lock must not be held upon entry
+*
+* Return:
+*    Changed device state.
+*/
+uint32_t
+qla82xx_wait_for_state_change(scsi_qla_host_t *vha, uint32_t curr_state)
+{
+	struct qla_hw_data *ha = vha->hw;
+	uint32_t dev_state;
+
+	do {
+		msleep(1000);
+		qla82xx_idc_lock(ha);
+		dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+		qla82xx_idc_unlock(ha);
+	} while (dev_state == curr_state);
+
+	return dev_state;
+}
+
 static void
 qla82xx_dev_failed_handler(scsi_qla_host_t *vha)
 {
@@ -3438,15 +3556,28 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 			qla82xx_idc_lock(ha);
 			break;
 		case QLA82XX_DEV_NEED_RESET:
-			if (!ql2xdontresethba)
-				qla82xx_need_reset_handler(vha);
+			qla82xx_need_reset_handler(vha);
 			break;
 		case QLA82XX_DEV_NEED_QUIESCENT:
-			qla82xx_set_qsnt_ready(ha);
+			qla82xx_need_qsnt_handler(vha);
+			/* Reset timeout value after quiescence handler */
+			dev_init_timeout = jiffies + (ha->nx_dev_init_timeout\
+							 * HZ);
+			break;
 		case QLA82XX_DEV_QUIESCENT:
+			/* Owner will exit and other will wait for the state
+			 * to get changed
+			 */
+			if (ha->flags.quiesce_owner)
+				goto exit;
+
 			qla82xx_idc_unlock(ha);
 			msleep(1000);
 			qla82xx_idc_lock(ha);
+
+			/* Reset timeout value after quiescence handler */
+			dev_init_timeout = jiffies + (ha->nx_dev_init_timeout\
+							 * HZ);
 			break;
 		case QLA82XX_DEV_FAILED:
 			qla82xx_dev_failed_handler(vha);
@@ -3489,6 +3620,13 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 					&ha->mbx_cmd_flags))
 					complete(&ha->mbx_intr_comp);
 			}
+		} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
+			!test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags)) {
+			DEBUG(qla_printk(KERN_INFO, ha,
+				"scsi(%ld) %s - detected quiescence needed\n",
+				vha->host_no, __func__));
+			set_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags);
+			qla2xxx_wake_dpc(vha);
 		} else {
 			qla82xx_check_fw_alive(vha);
 		}
diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h
index 51ec0c5380e..ed5883f1778 100644
--- a/drivers/scsi/qla2xxx/qla_nx.h
+++ b/drivers/scsi/qla2xxx/qla_nx.h
@@ -523,8 +523,6 @@
 # define QLA82XX_CAM_RAM_BASE		(QLA82XX_CRB_CAM + 0x02000)
 # define QLA82XX_CAM_RAM(reg)		(QLA82XX_CAM_RAM_BASE + (reg))
 
-#define QLA82XX_PEG_TUNE_MN_SPD_ZEROED	0x80000000
-#define QLA82XX_BOOT_LOADER_MN_ISSUE	0xff00ffff
 #define QLA82XX_PORT_MODE_ADDR		(QLA82XX_CAM_RAM(0x24))
 #define QLA82XX_PEG_HALT_STATUS1	(QLA82XX_CAM_RAM(0xa8))
 #define QLA82XX_PEG_HALT_STATUS2	(QLA82XX_CAM_RAM(0xac))
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 1830e6e9731..c194c23ca1f 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -37,12 +37,12 @@ static struct kmem_cache *srb_cachep;
 static struct kmem_cache *ctx_cachep;
 
 int ql2xlogintimeout = 20;
-module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
+module_param(ql2xlogintimeout, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xlogintimeout,
 		"Login timeout value in seconds.");
 
 int qlport_down_retry;
-module_param(qlport_down_retry, int, S_IRUGO|S_IRUSR);
+module_param(qlport_down_retry, int, S_IRUGO);
 MODULE_PARM_DESC(qlport_down_retry,
 		"Maximum number of command retries to a port that returns "
 		"a PORT-DOWN status.");
@@ -55,12 +55,12 @@ MODULE_PARM_DESC(ql2xplogiabsentdevice,
 		"Default is 0 - no PLOGI. 1 - perfom PLOGI.");
 
 int ql2xloginretrycount = 0;
-module_param(ql2xloginretrycount, int, S_IRUGO|S_IRUSR);
+module_param(ql2xloginretrycount, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xloginretrycount,
 		"Specify an alternate value for the NVRAM login retry count.");
 
 int ql2xallocfwdump = 1;
-module_param(ql2xallocfwdump, int, S_IRUGO|S_IRUSR);
+module_param(ql2xallocfwdump, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xallocfwdump,
 		"Option to enable allocation of memory for a firmware dump "
 		"during HBA initialization.  Memory allocation requirements "
@@ -73,7 +73,7 @@ MODULE_PARM_DESC(ql2xextended_error_logging,
 		"Default is 0 - no logging. 1 - log errors.");
 
 int ql2xshiftctondsd = 6;
-module_param(ql2xshiftctondsd, int, S_IRUGO|S_IRUSR);
+module_param(ql2xshiftctondsd, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xshiftctondsd,
 		"Set to control shifting of command type processing "
 		"based on total number of SG elements.");
@@ -81,7 +81,7 @@ MODULE_PARM_DESC(ql2xshiftctondsd,
 static void qla2x00_free_device(scsi_qla_host_t *);
 
 int ql2xfdmienable=1;
-module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
+module_param(ql2xfdmienable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xfdmienable,
 		"Enables FDMI registrations. "
 		"0 - no FDMI. Default is 1 - perform FDMI.");
@@ -106,27 +106,27 @@ MODULE_PARM_DESC(ql2xenablehba_err_chk,
 		" Default is 0 - Error isolation disabled, 1 - Enable it");
 
 int ql2xiidmaenable=1;
-module_param(ql2xiidmaenable, int, S_IRUGO|S_IRUSR);
+module_param(ql2xiidmaenable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xiidmaenable,
 		"Enables iIDMA settings "
 		"Default is 1 - perform iIDMA. 0 - no iIDMA.");
 
 int ql2xmaxqueues = 1;
-module_param(ql2xmaxqueues, int, S_IRUGO|S_IRUSR);
+module_param(ql2xmaxqueues, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xmaxqueues,
 		"Enables MQ settings "
 		"Default is 1 for single queue. Set it to number "
 		"of queues in MQ mode.");
 
 int ql2xmultique_tag;
-module_param(ql2xmultique_tag, int, S_IRUGO|S_IRUSR);
+module_param(ql2xmultique_tag, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xmultique_tag,
 		"Enables CPU affinity settings for the driver "
 		"Default is 0 for no affinity of request and response IO. "
 		"Set it to 1 to turn on the cpu affinity.");
 
 int ql2xfwloadbin;
-module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
+module_param(ql2xfwloadbin, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xfwloadbin,
 		"Option to specify location from which to load ISP firmware:\n"
 		" 2 -- load firmware via the request_firmware() (hotplug)\n"
@@ -135,39 +135,32 @@ MODULE_PARM_DESC(ql2xfwloadbin,
 		" 0 -- use default semantics.\n");
 
 int ql2xetsenable;
-module_param(ql2xetsenable, int, S_IRUGO|S_IRUSR);
+module_param(ql2xetsenable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xetsenable,
 		"Enables firmware ETS burst."
 		"Default is 0 - skip ETS enablement.");
 
 int ql2xdbwr = 1;
-module_param(ql2xdbwr, int, S_IRUGO|S_IRUSR);
+module_param(ql2xdbwr, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xdbwr,
 	"Option to specify scheme for request queue posting\n"
 	" 0 -- Regular doorbell.\n"
 	" 1 -- CAMRAM doorbell (faster).\n");
 
-int ql2xdontresethba;
-module_param(ql2xdontresethba, int, S_IRUGO|S_IRUSR);
-MODULE_PARM_DESC(ql2xdontresethba,
-	"Option to specify reset behaviour\n"
-	" 0 (Default) -- Reset on failure.\n"
-	" 1 -- Do not reset on failure.\n");
-
 int ql2xtargetreset = 1;
-module_param(ql2xtargetreset, int, S_IRUGO|S_IRUSR);
+module_param(ql2xtargetreset, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xtargetreset,
 		 "Enable target reset."
 		 "Default is 1 - use hw defaults.");
 
 int ql2xgffidenable;
-module_param(ql2xgffidenable, int, S_IRUGO|S_IRUSR);
+module_param(ql2xgffidenable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xgffidenable,
 		"Enables GFF_ID checks of port type. "
 		"Default is 0 - Do not use GFF_ID information.");
 
 int ql2xasynctmfenable;
-module_param(ql2xasynctmfenable, int, S_IRUGO|S_IRUSR);
+module_param(ql2xasynctmfenable, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xasynctmfenable,
 		"Enables issue of TM IOCBs asynchronously via IOCB mechanism"
 		"Default is 0 - Issue TM IOCBs via mailbox mechanism.");
@@ -179,8 +172,7 @@ static int qla2xxx_slave_alloc(struct scsi_device *);
 static int qla2xxx_scan_finished(struct Scsi_Host *, unsigned long time);
 static void qla2xxx_scan_start(struct Scsi_Host *);
 static void qla2xxx_slave_destroy(struct scsi_device *);
-static int qla2xxx_queuecommand(struct scsi_cmnd *cmd,
-		void (*fn)(struct scsi_cmnd *));
+static int qla2xxx_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static int qla2xxx_eh_abort(struct scsi_cmnd *);
 static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
 static int qla2xxx_eh_target_reset(struct scsi_cmnd *);
@@ -535,7 +527,7 @@ qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
 }
 
 static int
-qla2xxx_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+qla2xxx_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
@@ -609,6 +601,8 @@ qc24_fail_command:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(qla2xxx_queuecommand)
+
 
 /*
  * qla2x00_eh_wait_on_command
@@ -828,7 +822,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 	srb_t *sp;
-	int ret;
+	int ret = SUCCESS;
 	unsigned int id, lun;
 	unsigned long flags;
 	int wait = 0;
@@ -2063,6 +2057,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
 		ha->gid_list_info_size = 8;
 		ha->optrom_size = OPTROM_SIZE_82XX;
+		ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
 		ha->isp_ops = &qla82xx_isp_ops;
 		ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
 		ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
@@ -2369,7 +2364,7 @@ qla2x00_remove_one(struct pci_dev *pdev)
 	list_for_each_entry(vha, &ha->vp_list, list) {
 		atomic_inc(&vha->vref_count);
 
-		if (vha && vha->fc_vport) {
+		if (vha->fc_vport) {
 			spin_unlock_irqrestore(&ha->vport_slock, flags);
 
 			fc_vport_terminate(vha->fc_vport);
@@ -3384,6 +3379,21 @@ qla2x00_do_dpc(void *data)
 			clear_bit(FCPORT_UPDATE_NEEDED, &base_vha->dpc_flags);
 		}
 
+		if (test_bit(ISP_QUIESCE_NEEDED, &base_vha->dpc_flags)) {
+			DEBUG(printk(KERN_INFO "scsi(%ld): dpc: sched "
+			    "qla2x00_quiesce_needed ha = %p\n",
+			    base_vha->host_no, ha));
+			qla82xx_device_state_handler(base_vha);
+			clear_bit(ISP_QUIESCE_NEEDED, &base_vha->dpc_flags);
+			if (!ha->flags.quiesce_owner) {
+				qla2x00_perform_loop_resync(base_vha);
+
+				qla82xx_idc_lock(ha);
+				qla82xx_clear_qsnt_ready(base_vha);
+				qla82xx_idc_unlock(ha);
+			}
+		}
+
 		if (test_and_clear_bit(RESET_MARKER_NEEDED,
 							&base_vha->dpc_flags) &&
 		    (!(test_and_set_bit(RESET_ACTIVE, &base_vha->dpc_flags)))) {
@@ -3587,13 +3597,16 @@ qla2x00_timer(scsi_qla_host_t *vha)
 		return;
 	}
 
-	if (IS_QLA82XX(ha))
-		qla82xx_watchdog(vha);
-
 	/* Hardware read to raise pending EEH errors during mailbox waits. */
 	if (!pci_channel_offline(ha->pdev))
 		pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
 
+	if (IS_QLA82XX(ha)) {
+		if (test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags))
+			start_dpc++;
+		qla82xx_watchdog(vha);
+	}
+
 	/* Loop down handler. */
 	if (atomic_read(&vha->loop_down_timer) > 0 &&
 	    !(test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags))
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 76de9574b38..22070621206 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -669,6 +669,13 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
 		def = 1;
 	else if (IS_QLA81XX(ha))
 		def = 2;
+
+	/* Assign FCP prio region since older adapters may not have FLT, or
+	   FCP prio region in it's FLT.
+	 */
+	ha->flt_region_fcp_prio = ha->flags.port0 ?
+	    fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
+
 	ha->flt_region_flt = flt_addr;
 	wptr = (uint16_t *)req->ring;
 	flt = (struct qla_flt_header *)req->ring;
@@ -696,10 +703,6 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
 		goto no_flash_data;
 	}
 
-	/* Assign FCP prio region since older FLT's may not have it */
-	ha->flt_region_fcp_prio = ha->flags.port0 ?
-	    fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
-
 	loc = locations[1];
 	cnt = le16_to_cpu(flt->length) / sizeof(struct qla_flt_region);
 	for ( ; cnt; cnt--, region++) {
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 8edbccb3232..cf0075a2d0c 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.04-k0"
+#define QLA2XXX_VERSION      "8.03.05-k0"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
-#define QLA_DRIVER_PATCH_VER	4
+#define QLA_DRIVER_PATCH_VER	5
 #define QLA_DRIVER_BETA_VER	0
diff --git a/drivers/scsi/qla4xxx/ql4_dbg.c b/drivers/scsi/qla4xxx/ql4_dbg.c
index edcf048215d..af62c3cf875 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.c
+++ b/drivers/scsi/qla4xxx/ql4_dbg.c
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla4xxx/ql4_dbg.h b/drivers/scsi/qla4xxx/ql4_dbg.h
index d861c3b411c..abd83602cdd 100644
--- a/drivers/scsi/qla4xxx/ql4_dbg.h
+++ b/drivers/scsi/qla4xxx/ql4_dbg.h
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index 0f3bfc3da5c..2fc0045b1a5 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
@@ -175,7 +175,7 @@
 struct srb {
 	struct list_head list;	/* (8)	 */
 	struct scsi_qla_host *ha;	/* HA the SP is queued on */
-	struct ddb_entry	*ddb;
+	struct ddb_entry *ddb;
 	uint16_t flags;		/* (1) Status flags. */
 
 #define SRB_DMA_VALID		BIT_3	/* DMA Buffer mapped. */
@@ -191,7 +191,6 @@ struct srb {
 	struct scsi_cmnd *cmd;	/* (4) SCSI command block */
 	dma_addr_t dma_handle;	/* (4) for unmap of single transfers */
 	struct kref srb_ref;	/* reference count for this srb */
-	uint32_t fw_ddb_index;
 	uint8_t err_id;		/* error id */
 #define SRB_ERR_PORT	   1	/* Request failed because "port down" */
 #define SRB_ERR_LOOP	   2	/* Request failed because "loop down" */
diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h
index 5e757d7fff7..c1985792f03 100644
--- a/drivers/scsi/qla4xxx/ql4_fw.h
+++ b/drivers/scsi/qla4xxx/ql4_fw.h
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h
index 6575a47501e..8fad99b7eef 100644
--- a/drivers/scsi/qla4xxx/ql4_glbl.h
+++ b/drivers/scsi/qla4xxx/ql4_glbl.h
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index dc01fa3da5d..1629c48c35e 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla4xxx/ql4_inline.h b/drivers/scsi/qla4xxx/ql4_inline.h
index 9471ac75500..62f90bdec5d 100644
--- a/drivers/scsi/qla4xxx/ql4_inline.h
+++ b/drivers/scsi/qla4xxx/ql4_inline.h
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c
index 5ae49fd8784..75fcd82a8fc 100644
--- a/drivers/scsi/qla4xxx/ql4_iocb.c
+++ b/drivers/scsi/qla4xxx/ql4_iocb.c
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c
index 7c33fd5943d..6ffbe9727df 100644
--- a/drivers/scsi/qla4xxx/ql4_isr.c
+++ b/drivers/scsi/qla4xxx/ql4_isr.c
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
@@ -554,7 +554,8 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha,
 			/* mbox_sts[2] = Old ACB state
 			 * mbox_sts[3] = new ACB state */
 			if ((mbox_sts[3] == ACB_STATE_VALID) &&
-			    (mbox_sts[2] == ACB_STATE_TENTATIVE))
+			    ((mbox_sts[2] == ACB_STATE_TENTATIVE) ||
+			    (mbox_sts[2] == ACB_STATE_ACQUIRING)))
 				set_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags);
 			else if ((mbox_sts[3] == ACB_STATE_ACQUIRING) &&
 			    (mbox_sts[2] == ACB_STATE_VALID))
@@ -1077,7 +1078,7 @@ try_msi:
 	ret = pci_enable_msi(ha->pdev);
 	if (!ret) {
 		ret = request_irq(ha->pdev->irq, qla4_8xxx_msi_handler,
-			IRQF_DISABLED|IRQF_SHARED, DRIVER_NAME, ha);
+			0, DRIVER_NAME, ha);
 		if (!ret) {
 			DEBUG2(ql4_printk(KERN_INFO, ha, "MSI: Enabled.\n"));
 			set_bit(AF_MSI_ENABLED, &ha->flags);
@@ -1095,7 +1096,7 @@ try_msi:
 try_intx:
 	/* Trying INTx */
 	ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler,
-	    IRQF_DISABLED|IRQF_SHARED, DRIVER_NAME, ha);
+	    IRQF_SHARED, DRIVER_NAME, ha);
 	if (!ret) {
 		DEBUG2(ql4_printk(KERN_INFO, ha, "INTx: Enabled.\n"));
 		set_bit(AF_INTx_ENABLED, &ha->flags);
diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c
index 2d2f9c879bf..f65626aec7c 100644
--- a/drivers/scsi/qla4xxx/ql4_mbx.c
+++ b/drivers/scsi/qla4xxx/ql4_mbx.c
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
@@ -81,23 +81,7 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount,
 	 */
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
-	if (is_qla8022(ha)) {
-		intr_status = readl(&ha->qla4_8xxx_reg->host_int);
-		if (intr_status & ISRX_82XX_RISC_INT) {
-			/* Service existing interrupt */
-			DEBUG2(printk("scsi%ld: %s: "
-			    "servicing existing interrupt\n",
-			    ha->host_no, __func__));
-			intr_status = readl(&ha->qla4_8xxx_reg->host_status);
-			ha->isp_ops->interrupt_service_routine(ha, intr_status);
-			clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags);
-			if (test_bit(AF_INTERRUPTS_ON, &ha->flags) &&
-			    test_bit(AF_INTx_ENABLED, &ha->flags))
-				qla4_8xxx_wr_32(ha,
-				    ha->nx_legacy_intr.tgt_mask_reg,
-				    0xfbff);
-		}
-	} else {
+	if (!is_qla8022(ha)) {
 		intr_status = readl(&ha->reg->ctrl_status);
 		if (intr_status & CSR_SCSI_PROCESSOR_INTR) {
 			/* Service existing interrupt */
@@ -934,7 +918,7 @@ int qla4xxx_abort_task(struct scsi_qla_host *ha, struct srb *srb)
 		return status;
 
 	mbox_cmd[0] = MBOX_CMD_ABORT_TASK;
-	mbox_cmd[1] = srb->fw_ddb_index;
+	mbox_cmd[1] = srb->ddb->fw_ddb_index;
 	mbox_cmd[2] = index;
 	/* Immediate Command Enable */
 	mbox_cmd[5] = 0x01;
diff --git a/drivers/scsi/qla4xxx/ql4_nvram.c b/drivers/scsi/qla4xxx/ql4_nvram.c
index f0d0fbf88aa..b4b859b2d47 100644
--- a/drivers/scsi/qla4xxx/ql4_nvram.c
+++ b/drivers/scsi/qla4xxx/ql4_nvram.c
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla4xxx/ql4_nvram.h b/drivers/scsi/qla4xxx/ql4_nvram.h
index 7a8fc66a760..b3831bd2947 100644
--- a/drivers/scsi/qla4xxx/ql4_nvram.h
+++ b/drivers/scsi/qla4xxx/ql4_nvram.h
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c
index 474b10d7136..3d5ef2df413 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.c
+++ b/drivers/scsi/qla4xxx/ql4_nx.c
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2009 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
@@ -942,12 +942,55 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose)
 
 	/* Halt all the indiviual PEGs and other blocks of the ISP */
 	qla4_8xxx_rom_lock(ha);
+
+	/* mask all niu interrupts */
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x40, 0xff);
+	/* disable xge rx/tx */
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x70000, 0x00);
+	/* disable xg1 rx/tx */
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x80000, 0x00);
+
+	/* halt sre */
+	val = qla4_8xxx_rd_32(ha, QLA82XX_CRB_SRE + 0x1000);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_SRE + 0x1000, val & (~(0x1)));
+
+	/* halt epg */
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_EPG + 0x1300, 0x1);
+
+	/* halt timers */
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x0, 0x0);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x8, 0x0);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x10, 0x0);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x18, 0x0);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x100, 0x0);
+
+	/* halt pegs */
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x3c, 1);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_1 + 0x3c, 1);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_2 + 0x3c, 1);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_3 + 0x3c, 1);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c, 1);
+
+	/* big hammer */
+	msleep(1000);
 	if (test_bit(DPC_RESET_HA, &ha->dpc_flags))
 		/* don't reset CAM block on reset */
 		qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff);
 	else
 		qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff);
 
+	/* reset ms */
+	val = qla4_8xxx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
+	val |= (1 << 1);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
+
+	msleep(20);
+	/* unreset ms */
+	val = qla4_8xxx_rd_32(ha, QLA82XX_CRB_QDR_NET + 0xe4);
+	val &= ~(1 << 1);
+	qla4_8xxx_wr_32(ha, QLA82XX_CRB_QDR_NET + 0xe4, val);
+	msleep(20);
+
 	qla4_8xxx_rom_unlock(ha);
 
 	/* Read the signature value from the flash.
@@ -1084,14 +1127,14 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose)
 static int
 qla4_8xxx_load_from_flash(struct scsi_qla_host *ha, uint32_t image_start)
 {
-	int  i;
+	int  i, rval = 0;
 	long size = 0;
 	long flashaddr, memaddr;
 	u64 data;
 	u32 high, low;
 
 	flashaddr = memaddr = ha->hw.flt_region_bootload;
-	size = (image_start - flashaddr)/8;
+	size = (image_start - flashaddr) / 8;
 
 	DEBUG2(printk("scsi%ld: %s: bootldr=0x%lx, fw_image=0x%x\n",
 	    ha->host_no, __func__, flashaddr, image_start));
@@ -1100,14 +1143,18 @@ qla4_8xxx_load_from_flash(struct scsi_qla_host *ha, uint32_t image_start)
 		if ((qla4_8xxx_rom_fast_read(ha, flashaddr, (int *)&low)) ||
 		    (qla4_8xxx_rom_fast_read(ha, flashaddr + 4,
 		    (int *)&high))) {
-			return -1;
+			rval = -1;
+			goto exit_load_from_flash;
 		}
 		data = ((u64)high << 32) | low ;
-		qla4_8xxx_pci_mem_write_2M(ha, memaddr, &data, 8);
+		rval = qla4_8xxx_pci_mem_write_2M(ha, memaddr, &data, 8);
+		if (rval)
+			goto exit_load_from_flash;
+
 		flashaddr += 8;
 		memaddr   += 8;
 
-		if (i%0x1000 == 0)
+		if (i % 0x1000 == 0)
 			msleep(1);
 
 	}
@@ -1119,7 +1166,8 @@ qla4_8xxx_load_from_flash(struct scsi_qla_host *ha, uint32_t image_start)
 	qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001e);
 	read_unlock(&ha->hw_lock);
 
-	return 0;
+exit_load_from_flash:
+	return rval;
 }
 
 static int qla4_8xxx_load_fw(struct scsi_qla_host *ha, uint32_t image_start)
diff --git a/drivers/scsi/qla4xxx/ql4_nx.h b/drivers/scsi/qla4xxx/ql4_nx.h
index ff689bf5300..35376a1c3f1 100644
--- a/drivers/scsi/qla4xxx/ql4_nx.h
+++ b/drivers/scsi/qla4xxx/ql4_nx.h
@@ -1,8 +1,8 @@
 /*
- * QLogic Fibre Channel HBA Driver
- * Copyright (c)  2003-2008 QLogic Corporation
+ * QLogic iSCSI HBA Driver
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
- * See LICENSE.qla2xxx for copyright and licensing details.
+ * See LICENSE.qla4xxx for copyright and licensing details.
  */
 #ifndef __QLA_NX_H
 #define __QLA_NX_H
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index f4cd846abf6..3fc1d256636 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -1,6 +1,6 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
@@ -79,8 +79,7 @@ static enum blk_eh_timer_return qla4xxx_eh_cmd_timed_out(struct scsi_cmnd *sc);
 /*
  * SCSI host template entry points
  */
-static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
-				void (*done) (struct scsi_cmnd *));
+static int qla4xxx_queuecommand(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 static int qla4xxx_eh_abort(struct scsi_cmnd *cmd);
 static int qla4xxx_eh_device_reset(struct scsi_cmnd *cmd);
 static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
@@ -464,7 +463,7 @@ void qla4xxx_srb_compl(struct kref *ref)
  * completion handling).   Unfortunely, it sometimes calls the scheduler
  * in interrupt context which is a big NO! NO!.
  **/
-static int qla4xxx_queuecommand(struct scsi_cmnd *cmd,
+static int qla4xxx_queuecommand_lck(struct scsi_cmnd *cmd,
 				void (*done)(struct scsi_cmnd *))
 {
 	struct scsi_qla_host *ha = to_qla_host(cmd->device->host);
@@ -538,6 +537,8 @@ qc_fail_command:
 	return 0;
 }
 
+static DEF_SCSI_QCMD(qla4xxx_queuecommand)
+
 /**
  * qla4xxx_mem_free - frees memory allocated to adapter
  * @ha: Pointer to host adapter structure.
@@ -705,18 +706,22 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha)
 	dev_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
 
 	/* don't poll if reset is going on */
-	if (!test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags)) {
+	if (!(test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) ||
+	    test_bit(DPC_RESET_HA, &ha->dpc_flags) ||
+	    test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags))) {
 		if (dev_state == QLA82XX_DEV_NEED_RESET &&
 		    !test_bit(DPC_RESET_HA, &ha->dpc_flags)) {
-			printk("scsi%ld: %s: HW State: NEED RESET!\n",
-			    ha->host_no, __func__);
-			set_bit(DPC_RESET_HA, &ha->dpc_flags);
-			qla4xxx_wake_dpc(ha);
-			qla4xxx_mailbox_premature_completion(ha);
+			if (!ql4xdontresethba) {
+				ql4_printk(KERN_INFO, ha, "%s: HW State: "
+				    "NEED RESET!\n", __func__);
+				set_bit(DPC_RESET_HA, &ha->dpc_flags);
+				qla4xxx_wake_dpc(ha);
+				qla4xxx_mailbox_premature_completion(ha);
+			}
 		} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
 		    !test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) {
-			printk("scsi%ld: %s: HW State: NEED QUIES!\n",
-			    ha->host_no, __func__);
+			ql4_printk(KERN_INFO, ha, "%s: HW State: NEED QUIES!\n",
+			    __func__);
 			set_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags);
 			qla4xxx_wake_dpc(ha);
 		} else  {
@@ -1720,6 +1725,14 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev,
 	if (!test_bit(AF_ONLINE, &ha->flags)) {
 		ql4_printk(KERN_WARNING, ha, "Failed to initialize adapter\n");
 
+		if (is_qla8022(ha) && ql4xdontresethba) {
+			/* Put the device in failed state. */
+			DEBUG2(printk(KERN_ERR "HW STATE: FAILED\n"));
+			qla4_8xxx_idc_lock(ha);
+			qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
+			    QLA82XX_DEV_FAILED);
+			qla4_8xxx_idc_unlock(ha);
+		}
 		ret = -ENODEV;
 		goto probe_failed;
 	}
diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h
index 9bfacf4ed13..8475b308e01 100644
--- a/drivers/scsi/qla4xxx/ql4_version.h
+++ b/drivers/scsi/qla4xxx/ql4_version.h
@@ -1,8 +1,8 @@
 /*
  * QLogic iSCSI HBA Driver
- * Copyright (c)  2003-2006 QLogic Corporation
+ * Copyright (c)  2003-2010 QLogic Corporation
  *
  * See LICENSE.qla4xxx for copyright and licensing details.
  */
 
-#define QLA4XXX_DRIVER_VERSION	"5.02.00-k4"
+#define QLA4XXX_DRIVER_VERSION	"5.02.00-k5"
diff --git a/drivers/scsi/qlogicfas408.c b/drivers/scsi/qlogicfas408.c
index 1ad51552d6b..c3a9151ca82 100644
--- a/drivers/scsi/qlogicfas408.c
+++ b/drivers/scsi/qlogicfas408.c
@@ -439,7 +439,7 @@ irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id)
  *	Queued command
  */
 
-int qlogicfas408_queuecommand(struct scsi_cmnd *cmd,
+static int qlogicfas408_queuecommand_lck(struct scsi_cmnd *cmd,
 			      void (*done) (struct scsi_cmnd *))
 {
 	struct qlogicfas408_priv *priv = get_priv_by_cmd(cmd);
@@ -459,6 +459,8 @@ int qlogicfas408_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+DEF_SCSI_QCMD(qlogicfas408_queuecommand)
+
 /* 
  *	Return bios parameters 
  */
diff --git a/drivers/scsi/qlogicfas408.h b/drivers/scsi/qlogicfas408.h
index 260626427a3..2f6c0a16620 100644
--- a/drivers/scsi/qlogicfas408.h
+++ b/drivers/scsi/qlogicfas408.h
@@ -103,8 +103,7 @@ struct qlogicfas408_priv {
 #define get_priv_by_host(x) (struct qlogicfas408_priv *)&((x)->hostdata[0])
 
 irqreturn_t qlogicfas408_ihandl(int irq, void *dev_id);
-int qlogicfas408_queuecommand(struct scsi_cmnd * cmd,
-			      void (*done) (struct scsi_cmnd *));
+int qlogicfas408_queuecommand(struct Scsi_Host *h, struct scsi_cmnd * cmd);
 int qlogicfas408_biosparam(struct scsi_device * disk,
 			   struct block_device *dev,
 			   sector_t capacity, int ip[]);
diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index f8c561cf751..664c9572d0c 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -1003,7 +1003,7 @@ static int qlogicpti_slave_configure(struct scsi_device *sdev)
  *
  * "This code must fly." -davem
  */
-static int qlogicpti_queuecommand(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *))
+static int qlogicpti_queuecommand_lck(struct scsi_cmnd *Cmnd, void (*done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = Cmnd->device->host;
 	struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
@@ -1052,6 +1052,8 @@ toss_command:
 	return 1;
 }
 
+static DEF_SCSI_QCMD(qlogicpti_queuecommand)
+
 static int qlogicpti_return_status(struct Status_Entry *sts, int id)
 {
 	int host_status = DID_ERROR;
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 348fba0a897..2aeb2e9c4d3 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -634,12 +634,13 @@ void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
  * Description: a serial number identifies a request for error recovery
  * and debugging purposes.  Protected by the Host_Lock of host.
  */
-static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
+void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 {
 	cmd->serial_number = host->cmd_serial_number++;
 	if (cmd->serial_number == 0) 
 		cmd->serial_number = host->cmd_serial_number++;
 }
+EXPORT_SYMBOL(scsi_cmd_get_serial);
 
 /**
  * scsi_dispatch_command - Dispatch a command to the low-level driver.
@@ -651,7 +652,6 @@ static inline void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd
 int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 {
 	struct Scsi_Host *host = cmd->device->host;
-	unsigned long flags = 0;
 	unsigned long timeout;
 	int rtn = 0;
 
@@ -737,23 +737,15 @@ int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
 		goto out;
 	}
 
-	spin_lock_irqsave(host->host_lock, flags);
-	/*
-	 * AK: unlikely race here: for some reason the timer could
-	 * expire before the serial number is set up below.
-	 *
-	 * TODO: kill serial or move to blk layer
-	 */
-	scsi_cmd_get_serial(host, cmd); 
-
 	if (unlikely(host->shost_state == SHOST_DEL)) {
 		cmd->result = (DID_NO_CONNECT << 16);
 		scsi_done(cmd);
 	} else {
 		trace_scsi_dispatch_cmd_start(cmd);
-		rtn = host->hostt->queuecommand(cmd, scsi_done);
+		cmd->scsi_done = scsi_done;
+		rtn = host->hostt->queuecommand(host, cmd);
 	}
-	spin_unlock_irqrestore(host->host_lock, flags);
+
 	if (rtn) {
 		trace_scsi_dispatch_cmd_error(cmd, rtn);
 		if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 2c36bae3bd4..7b310934efe 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1805,6 +1805,7 @@ static int resp_read(struct scsi_cmnd *SCpnt, unsigned long long lba,
 			devip->sense_buff[5] = (ret >> 8) & 0xff;
 			devip->sense_buff[6] = ret & 0xff;
 		}
+	        scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
 		return check_condition_result;
 	}
 
@@ -3538,7 +3539,7 @@ static void sdebug_remove_adapter(void)
 }
 
 static
-int scsi_debug_queuecommand(struct scsi_cmnd *SCpnt, done_funct_t done)
+int scsi_debug_queuecommand_lck(struct scsi_cmnd *SCpnt, done_funct_t done)
 {
 	unsigned char *cmd = (unsigned char *) SCpnt->cmnd;
 	int len, k;
@@ -3884,6 +3885,8 @@ write:
 			     (delay_override ? 0 : scsi_debug_delay));
 }
 
+static DEF_SCSI_QCMD(scsi_debug_queuecommand)
+
 static struct scsi_host_template sdebug_driver_template = {
 	.proc_info =		scsi_debug_proc_info,
 	.proc_name =		sdebug_proc_name,
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 1de30eb83bb..45c75649b9e 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -320,19 +320,11 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 				    "changed. The Linux SCSI layer does not "
 				    "automatically adjust these parameters.\n");
 
-		if (scmd->request->cmd_flags & REQ_HARDBARRIER)
-			/*
-			 * barrier requests should always retry on UA
-			 * otherwise block will get a spurious error
-			 */
-			return NEEDS_RETRY;
-		else
-			/*
-			 * for normal (non barrier) commands, pass the
-			 * UA upwards for a determination in the
-			 * completion functions
-			 */
-			return SUCCESS;
+		/*
+		 * Pass the UA upwards for a determination in the completion
+		 * functions.
+		 */
+		return SUCCESS;
 
 		/* these three are not supported */
 	case COPY_ABORTED:
@@ -623,7 +615,7 @@ static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
 	return rtn;
 }
 
-static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
+static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
 {
 	if (!scmd->device->host->hostt->eh_abort_handler)
 		return FAILED;
@@ -631,31 +623,9 @@ static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
 	return scmd->device->host->hostt->eh_abort_handler(scmd);
 }
 
-/**
- * scsi_try_to_abort_cmd - Ask host to abort a running command.
- * @scmd:	SCSI cmd to abort from Lower Level.
- *
- * Notes:
- *    This function will not return until the user's completion function
- *    has been called.  there is no timeout on this operation.  if the
- *    author of the low-level driver wishes this operation to be timed,
- *    they can provide this facility themselves.  helper functions in
- *    scsi_error.c can be supplied to make this easier to do.
- */
-static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
-{
-	/*
-	 * scsi_done was called just after the command timed out and before
-	 * we had a chance to process it. (db)
-	 */
-	if (scmd->serial_number == 0)
-		return SUCCESS;
-	return __scsi_try_to_abort_cmd(scmd);
-}
-
 static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
 {
-	if (__scsi_try_to_abort_cmd(scmd) != SUCCESS)
+	if (scsi_try_to_abort_cmd(scmd) != SUCCESS)
 		if (scsi_try_bus_device_reset(scmd) != SUCCESS)
 			if (scsi_try_target_reset(scmd) != SUCCESS)
 				if (scsi_try_bus_reset(scmd) != SUCCESS)
@@ -781,17 +751,15 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
 	struct Scsi_Host *shost = sdev->host;
 	DECLARE_COMPLETION_ONSTACK(done);
 	unsigned long timeleft;
-	unsigned long flags;
 	struct scsi_eh_save ses;
 	int rtn;
 
 	scsi_eh_prep_cmnd(scmd, &ses, cmnd, cmnd_size, sense_bytes);
 	shost->eh_action = &done;
 
-	spin_lock_irqsave(shost->host_lock, flags);
 	scsi_log_send(scmd);
-	shost->hostt->queuecommand(scmd, scsi_eh_done);
-	spin_unlock_irqrestore(shost->host_lock, flags);
+	scmd->scsi_done = scsi_eh_done;
+	shost->hostt->queuecommand(shost, scmd);
 
 	timeleft = wait_for_completion_timeout(&done, timeout);
 
@@ -1156,51 +1124,40 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost,
 				struct list_head *work_q,
 				struct list_head *done_q)
 {
-	struct scsi_cmnd *scmd, *tgtr_scmd, *next;
-	unsigned int id = 0;
-	int rtn;
+	LIST_HEAD(tmp_list);
 
-	do {
-		tgtr_scmd = NULL;
-		list_for_each_entry(scmd, work_q, eh_entry) {
-			if (id == scmd_id(scmd)) {
-				tgtr_scmd = scmd;
-				break;
-			}
-		}
-		if (!tgtr_scmd) {
-			/* not one exactly equal; find the next highest */
-			list_for_each_entry(scmd, work_q, eh_entry) {
-				if (scmd_id(scmd) > id &&
-				    (!tgtr_scmd ||
-				     scmd_id(tgtr_scmd) > scmd_id(scmd)))
-						tgtr_scmd = scmd;
-			}
-		}
-		if (!tgtr_scmd)
-			/* no more commands, that's it */
-			break;
+	list_splice_init(work_q, &tmp_list);
+
+	while (!list_empty(&tmp_list)) {
+		struct scsi_cmnd *next, *scmd;
+		int rtn;
+		unsigned int id;
+
+		scmd = list_entry(tmp_list.next, struct scsi_cmnd, eh_entry);
+		id = scmd_id(scmd);
 
 		SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Sending target reset "
 						  "to target %d\n",
 						  current->comm, id));
-		rtn = scsi_try_target_reset(tgtr_scmd);
-		if (rtn == SUCCESS || rtn == FAST_IO_FAIL) {
-			list_for_each_entry_safe(scmd, next, work_q, eh_entry) {
-				if (id == scmd_id(scmd))
-					if (!scsi_device_online(scmd->device) ||
-					    rtn == FAST_IO_FAIL ||
-					    !scsi_eh_tur(tgtr_scmd))
-						scsi_eh_finish_cmd(scmd,
-								   done_q);
-			}
-		} else
+		rtn = scsi_try_target_reset(scmd);
+		if (rtn != SUCCESS && rtn != FAST_IO_FAIL)
 			SCSI_LOG_ERROR_RECOVERY(3, printk("%s: Target reset"
 							  " failed target: "
 							  "%d\n",
 							  current->comm, id));
-		id++;
-	} while(id != 0);
+		list_for_each_entry_safe(scmd, next, &tmp_list, eh_entry) {
+			if (scmd_id(scmd) != id)
+				continue;
+
+			if ((rtn == SUCCESS || rtn == FAST_IO_FAIL)
+			    && (!scsi_device_online(scmd->device) ||
+				 rtn == FAST_IO_FAIL || !scsi_eh_tur(scmd)))
+				scsi_eh_finish_cmd(scmd, done_q);
+			else
+				/* push back on work queue for further processing */
+				list_move(&scmd->eh_entry, work_q);
+		}
+	}
 
 	return list_empty(work_q);
 }
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index eafeeda6e19..501f67bef71 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1278,11 +1278,10 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
 	}
 
 	if (scsi_target_is_busy(starget)) {
-		if (list_empty(&sdev->starved_entry)) {
+		if (list_empty(&sdev->starved_entry))
 			list_add_tail(&sdev->starved_entry,
 				      &shost->starved_list);
-			return 0;
-		}
+		return 0;
 	}
 
 	/* We're OK to process the command, so we can't be starved */
@@ -1403,11 +1402,6 @@ static void scsi_softirq_done(struct request *rq)
 
 	INIT_LIST_HEAD(&cmd->eh_entry);
 
-	/*
-	 * Set the serial numbers back to zero
-	 */
-	cmd->serial_number = 0;
-
 	atomic_inc(&cmd->device->iodone_cnt);
 	if (cmd->result)
 		atomic_inc(&cmd->device->ioerr_cnt);
@@ -1642,9 +1636,8 @@ struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost,
 
 	blk_queue_max_segment_size(q, dma_get_max_seg_size(dev));
 
-	/* New queue, no concurrency on queue_flags */
 	if (!shost->use_clustering)
-		queue_flag_clear_unlocked(QUEUE_FLAG_CLUSTER, q);
+		q->limits.cluster = 0;
 
 	/*
 	 * set a reasonable default alignment on word boundaries: the
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 76ee2e784f7..4c68d36f9ac 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -993,16 +993,14 @@ static int __remove_child (struct device * dev, void * data)
  */
 void scsi_remove_target(struct device *dev)
 {
-	struct device *rdev;
-
 	if (scsi_is_target_device(dev)) {
 		__scsi_remove_target(to_scsi_target(dev));
 		return;
 	}
 
-	rdev = get_device(dev);
+	get_device(dev);
 	device_for_each_child(dev, NULL, __remove_child);
-	put_device(rdev);
+	put_device(dev);
 }
 EXPORT_SYMBOL(scsi_remove_target);
 
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 332387a6bc2..f905ecb5704 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -2200,3 +2200,4 @@ MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, "
 MODULE_DESCRIPTION("iSCSI Transport Interface");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(ISCSI_TRANSPORT_VERSION);
+MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_ISCSI);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b9ab3a590e4..365024b0c40 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -46,7 +46,6 @@
 #include <linux/blkdev.h>
 #include <linux/blkpg.h>
 #include <linux/delay.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/string_helpers.h>
 #include <linux/async.h>
@@ -584,7 +583,7 @@ static int sd_prep_fn(struct request_queue *q, struct request *rq)
 		 * quietly refuse to do anything to a changed disc until 
 		 * the changed bit has been reset
 		 */
-		/* printk("SCSI disk has been changed. Prohibiting further I/O.\n"); */
+		/* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
 		goto out;
 	}
 
@@ -1024,7 +1023,6 @@ static int sd_media_changed(struct gendisk *disk)
 	 */
 	if (!scsi_device_online(sdp)) {
 		set_media_not_present(sdkp);
-		retval = 1;
 		goto out;
 	}
 
@@ -1055,7 +1053,6 @@ static int sd_media_changed(struct gendisk *disk)
 		       /* 0x3a is medium not present */
 		       sshdr->asc == 0x3a)) {
 		set_media_not_present(sdkp);
-		retval = 1;
 		goto out;
 	}
 
@@ -1066,12 +1063,27 @@ static int sd_media_changed(struct gendisk *disk)
 	 */
 	sdkp->media_present = 1;
 
-	retval = sdp->changed;
-	sdp->changed = 0;
 out:
-	if (retval != sdkp->previous_state)
+	/*
+	 * Report a media change under the following conditions:
+	 *
+	 *	Medium is present now and wasn't present before.
+	 *	Medium wasn't present before and is present now.
+	 *	Medium was present at all times, but it changed while
+	 *		we weren't looking (sdp->changed is set).
+	 *
+	 * If there was no medium before and there is no medium now then
+	 * don't report a change, even if a medium was inserted and removed
+	 * while we weren't looking.
+	 */
+	retval = (sdkp->media_present != sdkp->previous_state ||
+			(sdkp->media_present && sdp->changed));
+	if (retval)
 		sdev_evt_send_simple(sdp, SDEV_EVT_MEDIA_CHANGE, GFP_KERNEL);
-	sdkp->previous_state = retval;
+	sdkp->previous_state = sdkp->media_present;
+
+	/* sdp->changed indicates medium was changed or is not present */
+	sdp->changed = !sdkp->media_present;
 	kfree(sshdr);
 	return retval;
 }
@@ -1176,6 +1188,12 @@ static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
 	u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
 	u64 bad_lba;
 	int info_valid;
+	/*
+	 * resid is optional but mostly filled in.  When it's unused,
+	 * its value is zero, so we assume the whole buffer transferred
+	 */
+	unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
+	unsigned int good_bytes;
 
 	if (scmd->request->cmd_type != REQ_TYPE_FS)
 		return 0;
@@ -1209,7 +1227,8 @@ static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
 	/* This computation should always be done in terms of
 	 * the resolution of the device's medium.
 	 */
-	return (bad_lba - start_lba) * scmd->device->sector_size;
+	good_bytes = (bad_lba - start_lba) * scmd->device->sector_size;
+	return min(good_bytes, transferred);
 }
 
 /**
@@ -1903,10 +1922,14 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
 	int old_rcd = sdkp->RCD;
 	int old_dpofua = sdkp->DPOFUA;
 
-	if (sdp->skip_ms_page_8)
-		goto defaults;
-
-	if (sdp->type == TYPE_RBC) {
+	if (sdp->skip_ms_page_8) {
+		if (sdp->type == TYPE_RBC)
+			goto defaults;
+		else {
+			modepage = 0x3F;
+			dbd = 0;
+		}
+	} else if (sdp->type == TYPE_RBC) {
 		modepage = 6;
 		dbd = 8;
 	} else {
@@ -1934,13 +1957,11 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
 	 */
 	if (len < 3)
 		goto bad_sense;
-	if (len > 20)
-		len = 20;
-
-	/* Take headers and block descriptors into account */
-	len += data.header_length + data.block_descriptor_length;
-	if (len > SD_BUF_SIZE)
-		goto bad_sense;
+	else if (len > SD_BUF_SIZE) {
+		sd_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
+			  "data from %d to %d bytes\n", len, SD_BUF_SIZE);
+		len = SD_BUF_SIZE;
+	}
 
 	/* Get the data */
 	res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr);
@@ -1948,16 +1969,45 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
 	if (scsi_status_is_good(res)) {
 		int offset = data.header_length + data.block_descriptor_length;
 
-		if (offset >= SD_BUF_SIZE - 2) {
-			sd_printk(KERN_ERR, sdkp, "Malformed MODE SENSE response\n");
-			goto defaults;
+		while (offset < len) {
+			u8 page_code = buffer[offset] & 0x3F;
+			u8 spf       = buffer[offset] & 0x40;
+
+			if (page_code == 8 || page_code == 6) {
+				/* We're interested only in the first 3 bytes.
+				 */
+				if (len - offset <= 2) {
+					sd_printk(KERN_ERR, sdkp, "Incomplete "
+						  "mode parameter data\n");
+					goto defaults;
+				} else {
+					modepage = page_code;
+					goto Page_found;
+				}
+			} else {
+				/* Go to the next page */
+				if (spf && len - offset > 3)
+					offset += 4 + (buffer[offset+2] << 8) +
+						buffer[offset+3];
+				else if (!spf && len - offset > 1)
+					offset += 2 + buffer[offset+1];
+				else {
+					sd_printk(KERN_ERR, sdkp, "Incomplete "
+						  "mode parameter data\n");
+					goto defaults;
+				}
+			}
 		}
 
-		if ((buffer[offset] & 0x3f) != modepage) {
+		if (modepage == 0x3F) {
+			sd_printk(KERN_ERR, sdkp, "No Caching mode page "
+				  "present\n");
+			goto defaults;
+		} else if ((buffer[offset] & 0x3f) != modepage) {
 			sd_printk(KERN_ERR, sdkp, "Got wrong page\n");
 			goto defaults;
 		}
-
+	Page_found:
 		if (modepage == 8) {
 			sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
 			sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index 5b7388f1c83..1871b8ae83a 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -17,7 +17,7 @@
    Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
  */
 
-static const char *verstr = "20100829";
+static const char *verstr = "20101219";
 
 #include <linux/module.h>
 
@@ -3729,9 +3729,11 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm
 		b_size = PAGE_SIZE << order;
 	} else {
 		for (b_size = PAGE_SIZE, order = 0;
-		     order < ST_MAX_ORDER && b_size < new_size;
+		     order < ST_MAX_ORDER &&
+			     max_segs * (PAGE_SIZE << order) < new_size;
 		     order++, b_size *= 2)
 			;  /* empty */
+		STbuffer->reserved_page_order = order;
 	}
 	if (max_segs * (PAGE_SIZE << order) < new_size) {
 		if (order == ST_MAX_ORDER)
@@ -3758,7 +3760,6 @@ static int enlarge_buffer(struct st_buffer * STbuffer, int new_size, int need_dm
 		segs++;
 	}
 	STbuffer->b_data = page_address(STbuffer->reserved_pages[0]);
-	STbuffer->reserved_page_order = order;
 
 	return 1;
 }
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index 9c73dbda3bb..606215e54b8 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -572,7 +572,7 @@ stex_slave_destroy(struct scsi_device *sdev)
 }
 
 static int
-stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
+stex_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct st_hba *hba;
 	struct Scsi_Host *host;
@@ -698,6 +698,8 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(stex_queuecommand)
+
 static void stex_scsi_done(struct st_ccb *ccb)
 {
 	struct scsi_cmnd *cmd = ccb->cmd;
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 713620ed70d..4f0e5485ffd 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -908,7 +908,7 @@ static int NCR5380_init (struct Scsi_Host *instance, int flags)
  */
 
 /* Only make static if a wrapper function is used */
-static int NCR5380_queue_command(struct scsi_cmnd *cmd,
+static int NCR5380_queue_command_lck(struct scsi_cmnd *cmd,
 				 void (*done)(struct scsi_cmnd *))
 {
     SETUP_HOSTDATA(cmd->device->host);
@@ -1019,6 +1019,8 @@ static int NCR5380_queue_command(struct scsi_cmnd *cmd,
     return 0;
 }
 
+static DEF_SCSI_QCMD(NCR5380_queue_command)
+
 /*
  * Function : NCR5380_main (void) 
  *
diff --git a/drivers/scsi/sun3_scsi.h b/drivers/scsi/sun3_scsi.h
index b29a9d661ca..bcefd8458e6 100644
--- a/drivers/scsi/sun3_scsi.h
+++ b/drivers/scsi/sun3_scsi.h
@@ -51,8 +51,7 @@ static int sun3scsi_abort(struct scsi_cmnd *);
 static int sun3scsi_detect (struct scsi_host_template *);
 static const char *sun3scsi_info (struct Scsi_Host *);
 static int sun3scsi_bus_reset(struct scsi_cmnd *);
-static int sun3scsi_queue_command(struct scsi_cmnd *,
-				  void (*done)(struct scsi_cmnd *));
+static int sun3scsi_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int sun3scsi_release (struct Scsi_Host *);
 
 #ifndef CMD_PER_LUN
diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c
index e5c369bb568..190107ae120 100644
--- a/drivers/scsi/sym53c416.c
+++ b/drivers/scsi/sym53c416.c
@@ -734,7 +734,7 @@ const char *sym53c416_info(struct Scsi_Host *SChost)
 	return info;
 }
 
-int sym53c416_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
+static int sym53c416_queuecommand_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 {
 	int base;
 	unsigned long flags = 0;
@@ -761,6 +761,8 @@ int sym53c416_queuecommand(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
 	return 0;
 }
 
+DEF_SCSI_QCMD(sym53c416_queuecommand)
+
 static int sym53c416_host_reset(Scsi_Cmnd *SCpnt)
 {
 	int base;
diff --git a/drivers/scsi/sym53c416.h b/drivers/scsi/sym53c416.h
index 77860d0748f..387de5d80a7 100644
--- a/drivers/scsi/sym53c416.h
+++ b/drivers/scsi/sym53c416.h
@@ -25,7 +25,7 @@
 static int sym53c416_detect(struct scsi_host_template *);
 static const char *sym53c416_info(struct Scsi_Host *);
 static int sym53c416_release(struct Scsi_Host *);
-static int sym53c416_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
+static int sym53c416_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int sym53c416_host_reset(Scsi_Cmnd *);
 static int sym53c416_bios_param(struct scsi_device *, struct block_device *,
 		sector_t, int *);
diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 8b955b534a3..6b97ded9d45 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -505,7 +505,7 @@ void sym_log_bus_error(struct Scsi_Host *shost)
  * queuecommand method.  Entered with the host adapter lock held and
  * interrupts disabled.
  */
-static int sym53c8xx_queue_command(struct scsi_cmnd *cmd,
+static int sym53c8xx_queue_command_lck(struct scsi_cmnd *cmd,
 					void (*done)(struct scsi_cmnd *))
 {
 	struct sym_hcb *np = SYM_SOFTC_PTR(cmd);
@@ -536,6 +536,8 @@ static int sym53c8xx_queue_command(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(sym53c8xx_queue_command)
+
 /*
  *  Linux entry point of the interrupt handler.
  */
diff --git a/drivers/scsi/t128.h b/drivers/scsi/t128.h
index 76a069b7ac0..ada1115079c 100644
--- a/drivers/scsi/t128.h
+++ b/drivers/scsi/t128.h
@@ -96,8 +96,7 @@ static int t128_abort(struct scsi_cmnd *);
 static int t128_biosparam(struct scsi_device *, struct block_device *,
 			  sector_t, int*);
 static int t128_detect(struct scsi_host_template *);
-static int t128_queue_command(struct scsi_cmnd *,
-			      void (*done)(struct scsi_cmnd *));
+static int t128_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
 static int t128_bus_reset(struct scsi_cmnd *);
 
 #ifndef CMD_PER_LUN
diff --git a/drivers/scsi/tmscsim.c b/drivers/scsi/tmscsim.c
index 27866b0adfe..a124a28f2cc 100644
--- a/drivers/scsi/tmscsim.c
+++ b/drivers/scsi/tmscsim.c
@@ -1883,7 +1883,7 @@ dc390_ScsiRstDetect( struct dc390_acb* pACB )
     return;
 }
 
-static int DC390_queuecommand(struct scsi_cmnd *cmd,
+static int DC390_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	struct scsi_device *sdev = cmd->device;
@@ -1944,6 +1944,8 @@ static int DC390_queuecommand(struct scsi_cmnd *cmd,
 	return SCSI_MLQUEUE_DEVICE_BUSY;
 }
 
+static DEF_SCSI_QCMD(DC390_queuecommand)
+
 static void dc390_dumpinfo (struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb* pSRB)
 {
     struct pci_dev *pdev;
diff --git a/drivers/scsi/u14-34f.c b/drivers/scsi/u14-34f.c
index 5d9fdeeb231..edfc5da8be4 100644
--- a/drivers/scsi/u14-34f.c
+++ b/drivers/scsi/u14-34f.c
@@ -433,7 +433,7 @@
 
 static int u14_34f_detect(struct scsi_host_template *);
 static int u14_34f_release(struct Scsi_Host *);
-static int u14_34f_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+static int u14_34f_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int u14_34f_eh_abort(struct scsi_cmnd *);
 static int u14_34f_eh_host_reset(struct scsi_cmnd *);
 static int u14_34f_bios_param(struct scsi_device *, struct block_device *,
@@ -1248,7 +1248,7 @@ static void scsi_to_dev_dir(unsigned int i, unsigned int j) {
 
 }
 
-static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) {
+static int u14_34f_queuecommand_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *)) {
    unsigned int i, j, k;
    struct mscp *cpp;
 
@@ -1329,6 +1329,8 @@ static int u14_34f_queuecommand(struct scsi_cmnd *SCpnt, void (*done)(struct scs
    return 0;
 }
 
+static DEF_SCSI_QCMD(u14_34f_queuecommand)
+
 static int u14_34f_eh_abort(struct scsi_cmnd *SCarg) {
    unsigned int i, j;
 
diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c
index 27aa40f3980..0571ef9639c 100644
--- a/drivers/scsi/ultrastor.c
+++ b/drivers/scsi/ultrastor.c
@@ -700,7 +700,7 @@ static inline void build_sg_list(struct mscp *mscp, struct scsi_cmnd *SCpnt)
 	mscp->transfer_data_length = transfer_length;
 }
 
-static int ultrastor_queuecommand(struct scsi_cmnd *SCpnt,
+static int ultrastor_queuecommand_lck(struct scsi_cmnd *SCpnt,
 				void (*done) (struct scsi_cmnd *))
 {
     struct mscp *my_mscp;
@@ -825,6 +825,8 @@ retry:
     return 0;
 }
 
+static DEF_SCSI_QCMD(ultrastor_queuecommand)
+
 /* This code must deal with 2 cases:
 
    1. The command has not been written to the OGM.  In this case, set
diff --git a/drivers/scsi/ultrastor.h b/drivers/scsi/ultrastor.h
index a692905f95f..165c18b5cf5 100644
--- a/drivers/scsi/ultrastor.h
+++ b/drivers/scsi/ultrastor.h
@@ -15,8 +15,7 @@
 
 static int ultrastor_detect(struct scsi_host_template *);
 static const char *ultrastor_info(struct Scsi_Host *shpnt);
-static int ultrastor_queuecommand(struct scsi_cmnd *,
-				void (*done)(struct scsi_cmnd *));
+static int ultrastor_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 static int ultrastor_abort(struct scsi_cmnd *);
 static int ultrastor_host_reset(struct scsi_cmnd *);
 static int ultrastor_biosparam(struct scsi_device *, struct block_device *,
diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c
index 26894459c37..a18996d2446 100644
--- a/drivers/scsi/vmw_pvscsi.c
+++ b/drivers/scsi/vmw_pvscsi.c
@@ -690,7 +690,7 @@ static int pvscsi_queue_ring(struct pvscsi_adapter *adapter,
 	return 0;
 }
 
-static int pvscsi_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+static int pvscsi_queue_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 {
 	struct Scsi_Host *host = cmd->device->host;
 	struct pvscsi_adapter *adapter = shost_priv(host);
@@ -719,6 +719,8 @@ static int pvscsi_queue(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(pvscsi_queue)
+
 static int pvscsi_abort(struct scsi_cmnd *cmd)
 {
 	struct pvscsi_adapter *adapter = shost_priv(cmd->device->host);
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index b701bf2cc18..5f697e0bd00 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -371,8 +371,8 @@ calc_sync_msg(unsigned int period, unsigned int offset, unsigned int fast,
 	msg[1] = offset;
 }
 
-int
-wd33c93_queuecommand(struct scsi_cmnd *cmd,
+static int
+wd33c93_queuecommand_lck(struct scsi_cmnd *cmd,
 		void (*done)(struct scsi_cmnd *))
 {
 	struct WD33C93_hostdata *hostdata;
@@ -468,6 +468,8 @@ wd33c93_queuecommand(struct scsi_cmnd *cmd,
 	return 0;
 }
 
+DEF_SCSI_QCMD(wd33c93_queuecommand)
+
 /*
  * This routine attempts to start a scsi command. If the host_card is
  * already connected, we give up immediately. Otherwise, look through
diff --git a/drivers/scsi/wd33c93.h b/drivers/scsi/wd33c93.h
index 1ed5f3bf388..3b463d7304d 100644
--- a/drivers/scsi/wd33c93.h
+++ b/drivers/scsi/wd33c93.h
@@ -343,8 +343,7 @@ struct WD33C93_hostdata {
 void wd33c93_init (struct Scsi_Host *instance, const wd33c93_regs regs,
          dma_setup_t setup, dma_stop_t stop, int clock_freq);
 int wd33c93_abort (struct scsi_cmnd *cmd);
-int wd33c93_queuecommand (struct scsi_cmnd *cmd,
-		void (*done)(struct scsi_cmnd *));
+int wd33c93_queuecommand (struct Scsi_Host *h, struct scsi_cmnd *cmd);
 void wd33c93_intr (struct Scsi_Host *instance);
 int wd33c93_proc_info(struct Scsi_Host *, char *, char **, off_t, int, int);
 int wd33c93_host_reset (struct scsi_cmnd *);
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index 333580bf37c..db451ae0a36 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -1082,7 +1082,7 @@ static irqreturn_t wd7000_intr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int wd7000_queuecommand(struct scsi_cmnd *SCpnt,
+static int wd7000_queuecommand_lck(struct scsi_cmnd *SCpnt,
 		void (*done)(struct scsi_cmnd *))
 {
 	Scb *scb;
@@ -1139,6 +1139,8 @@ static int wd7000_queuecommand(struct scsi_cmnd *SCpnt,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(wd7000_queuecommand)
+
 static int wd7000_diagnostics(Adapter * host, int code)
 {
 	static IcbDiag icb = { ICB_OP_DIAGNOSTICS };
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 4d8e14b7aa9..b25e6e49053 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -454,21 +454,40 @@ static void tsi_serial_out(struct uart_port *p, int offset, int value)
 		writeb(value, p->membase + offset);
 }
 
+/* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */
+static inline void dwapb_save_out_value(struct uart_port *p, int offset,
+					int value)
+{
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
+
+	if (offset == UART_LCR)
+		up->lcr = value;
+}
+
+/* Read the IER to ensure any interrupt is cleared before returning from ISR. */
+static inline void dwapb_check_clear_ier(struct uart_port *p, int offset)
+{
+	if (offset == UART_TX || offset == UART_IER)
+		p->serial_in(p, UART_IER);
+}
+
 static void dwapb_serial_out(struct uart_port *p, int offset, int value)
 {
 	int save_offset = offset;
 	offset = map_8250_out_reg(p, offset) << p->regshift;
-	/* Save the LCR value so it can be re-written when a
-	 * Busy Detect interrupt occurs. */
-	if (save_offset == UART_LCR) {
-		struct uart_8250_port *up = (struct uart_8250_port *)p;
-		up->lcr = value;
-	}
+	dwapb_save_out_value(p, save_offset, value);
 	writeb(value, p->membase + offset);
-	/* Read the IER to ensure any interrupt is cleared before
-	 * returning from ISR. */
-	if (save_offset == UART_TX || save_offset == UART_IER)
-		value = p->serial_in(p, UART_IER);
+	dwapb_check_clear_ier(p, save_offset);
+}
+
+static void dwapb32_serial_out(struct uart_port *p, int offset, int value)
+{
+	int save_offset = offset;
+	offset = map_8250_out_reg(p, offset) << p->regshift;
+	dwapb_save_out_value(p, save_offset, value);
+	writel(value, p->membase + offset);
+	dwapb_check_clear_ier(p, save_offset);
 }
 
 static unsigned int io_serial_in(struct uart_port *p, int offset)
@@ -485,7 +504,8 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
 
 static void set_io_from_upio(struct uart_port *p)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)p;
+	struct uart_8250_port *up =
+		container_of(p, struct uart_8250_port, port);
 	switch (p->iotype) {
 	case UPIO_HUB6:
 		p->serial_in = hub6_serial_in;
@@ -518,6 +538,11 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = dwapb_serial_out;
 		break;
 
+	case UPIO_DWAPB32:
+		p->serial_in = mem32_serial_in;
+		p->serial_out = dwapb32_serial_out;
+		break;
+
 	default:
 		p->serial_in = io_serial_in;
 		p->serial_out = io_serial_out;
@@ -536,6 +561,7 @@ serial_out_sync(struct uart_8250_port *up, int offset, int value)
 	case UPIO_MEM32:
 	case UPIO_AU:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		p->serial_out(p, offset, value);
 		p->serial_in(p, UART_LCR);	/* safe, no side-effects */
 		break;
@@ -653,13 +679,13 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep)
 {
 	if (p->capabilities & UART_CAP_SLEEP) {
 		if (p->capabilities & UART_CAP_EFR) {
-			serial_outp(p, UART_LCR, 0xBF);
+			serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B);
 			serial_outp(p, UART_EFR, UART_EFR_ECB);
 			serial_outp(p, UART_LCR, 0);
 		}
 		serial_outp(p, UART_IER, sleep ? UART_IERX_SLEEP : 0);
 		if (p->capabilities & UART_CAP_EFR) {
-			serial_outp(p, UART_LCR, 0xBF);
+			serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_B);
 			serial_outp(p, UART_EFR, 0);
 			serial_outp(p, UART_LCR, 0);
 		}
@@ -752,7 +778,7 @@ static int size_fifo(struct uart_8250_port *up)
 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
 		    UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
 	serial_outp(up, UART_MCR, UART_MCR_LOOP);
-	serial_outp(up, UART_LCR, UART_LCR_DLAB);
+	serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
 	old_dl = serial_dl_read(up);
 	serial_dl_write(up, 0x0001);
 	serial_outp(up, UART_LCR, 0x03);
@@ -764,7 +790,7 @@ static int size_fifo(struct uart_8250_port *up)
 		serial_inp(up, UART_RX);
 	serial_outp(up, UART_FCR, old_fcr);
 	serial_outp(up, UART_MCR, old_mcr);
-	serial_outp(up, UART_LCR, UART_LCR_DLAB);
+	serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
 	serial_dl_write(up, old_dl);
 	serial_outp(up, UART_LCR, old_lcr);
 
@@ -782,7 +808,7 @@ static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
 	unsigned int id;
 
 	old_lcr = serial_inp(p, UART_LCR);
-	serial_outp(p, UART_LCR, UART_LCR_DLAB);
+	serial_outp(p, UART_LCR, UART_LCR_CONF_MODE_A);
 
 	old_dll = serial_inp(p, UART_DLL);
 	old_dlm = serial_inp(p, UART_DLM);
@@ -836,7 +862,7 @@ static void autoconfig_has_efr(struct uart_8250_port *up)
 	 * recommended for new designs).
 	 */
 	up->acr = 0;
-	serial_out(up, UART_LCR, 0xBF);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_out(up, UART_EFR, UART_EFR_ECB);
 	serial_out(up, UART_LCR, 0x00);
 	id1 = serial_icr_read(up, UART_ID1);
@@ -945,7 +971,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	 * Check for presence of the EFR when DLAB is set.
 	 * Only ST16C650V1 UARTs pass this test.
 	 */
-	serial_outp(up, UART_LCR, UART_LCR_DLAB);
+	serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
 	if (serial_in(up, UART_EFR) == 0) {
 		serial_outp(up, UART_EFR, 0xA8);
 		if (serial_in(up, UART_EFR) != 0) {
@@ -963,7 +989,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	 * Maybe it requires 0xbf to be written to the LCR.
 	 * (other ST16C650V2 UARTs, TI16C752A, etc)
 	 */
-	serial_outp(up, UART_LCR, 0xBF);
+	serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	if (serial_in(up, UART_EFR) == 0 && !broken_efr(up)) {
 		DEBUG_AUTOCONF("EFRv2 ");
 		autoconfig_has_efr(up);
@@ -1024,7 +1050,7 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
 	status1 = serial_in(up, UART_IIR) >> 5;
 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
-	serial_outp(up, UART_LCR, UART_LCR_DLAB);
+	serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_A);
 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
 	status2 = serial_in(up, UART_IIR) >> 5;
 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
@@ -1183,7 +1209,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	 * We also initialise the EFR (if any) to zero for later.  The
 	 * EFR occupies the same register location as the FCR and IIR.
 	 */
-	serial_outp(up, UART_LCR, 0xBF);
+	serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_outp(up, UART_EFR, 0);
 	serial_outp(up, UART_LCR, 0);
 
@@ -1319,7 +1345,8 @@ static inline void __stop_tx(struct uart_8250_port *p)
 
 static void serial8250_stop_tx(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	__stop_tx(up);
 
@@ -1336,7 +1363,8 @@ static void transmit_chars(struct uart_8250_port *up);
 
 static void serial8250_start_tx(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	if (!(up->ier & UART_IER_THRI)) {
 		up->ier |= UART_IER_THRI;
@@ -1364,7 +1392,8 @@ static void serial8250_start_tx(struct uart_port *port)
 
 static void serial8250_stop_rx(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	up->ier &= ~UART_IER_RLSI;
 	up->port.read_status_mask &= ~UART_LSR_DR;
@@ -1373,7 +1402,8 @@ static void serial8250_stop_rx(struct uart_port *port)
 
 static void serial8250_enable_ms(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	/* no MSR capabilities */
 	if (up->bugs & UART_BUG_NOMSR)
@@ -1581,7 +1611,8 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
 			handled = 1;
 
 			end = NULL;
-		} else if (up->port.iotype == UPIO_DWAPB &&
+		} else if ((up->port.iotype == UPIO_DWAPB ||
+			    up->port.iotype == UPIO_DWAPB32) &&
 			  (iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
 			/* The DesignWare APB UART has an Busy Detect (0x07)
 			 * interrupt meaning an LCR write attempt occured while the
@@ -1781,7 +1812,8 @@ static void serial8250_backup_timeout(unsigned long data)
 
 static unsigned int serial8250_tx_empty(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 	unsigned int lsr;
 
@@ -1795,7 +1827,8 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
 
 static unsigned int serial8250_get_mctrl(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned int status;
 	unsigned int ret;
 
@@ -1815,7 +1848,8 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port)
 
 static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned char mcr = 0;
 
 	if (mctrl & TIOCM_RTS)
@@ -1836,7 +1870,8 @@ static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
 
 static void serial8250_break_ctl(struct uart_port *port, int break_state)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&up->port.lock, flags);
@@ -1890,7 +1925,8 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits)
 
 static int serial8250_get_poll_char(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned char lsr = serial_inp(up, UART_LSR);
 
 	if (!(lsr & UART_LSR_DR))
@@ -1904,7 +1940,8 @@ static void serial8250_put_poll_char(struct uart_port *port,
 			 unsigned char c)
 {
 	unsigned int ier;
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -1938,11 +1975,14 @@ static void serial8250_put_poll_char(struct uart_port *port,
 
 static int serial8250_startup(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 	unsigned char lsr, iir;
 	int retval;
 
+	up->port.fifosize = uart_config[up->port.type].fifo_size;
+	up->tx_loadsz = uart_config[up->port.type].tx_loadsz;
 	up->capabilities = uart_config[up->port.type].flags;
 	up->mcr = 0;
 
@@ -1952,7 +1992,7 @@ static int serial8250_startup(struct uart_port *port)
 	if (up->port.type == PORT_16C950) {
 		/* Wake up and initialize UART */
 		up->acr = 0;
-		serial_outp(up, UART_LCR, 0xBF);
+		serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
 		serial_outp(up, UART_EFR, UART_EFR_ECB);
 		serial_outp(up, UART_IER, 0);
 		serial_outp(up, UART_LCR, 0);
@@ -2002,7 +2042,7 @@ static int serial8250_startup(struct uart_port *port)
 	if (up->port.type == PORT_16850) {
 		unsigned char fctr;
 
-		serial_outp(up, UART_LCR, 0xbf);
+		serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
 
 		fctr = serial_inp(up, UART_FCTR) & ~(UART_FCTR_RX|UART_FCTR_TX);
 		serial_outp(up, UART_FCTR, fctr | UART_FCTR_TRGD | UART_FCTR_RX);
@@ -2166,7 +2206,8 @@ dont_test_tx_en:
 
 static void serial8250_shutdown(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned long flags;
 
 	/*
@@ -2235,7 +2276,8 @@ void
 serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		          struct ktermios *old)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	unsigned char cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
@@ -2363,7 +2405,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 		if (termios->c_cflag & CRTSCTS)
 			efr |= UART_EFR_CTS;
 
-		serial_outp(up, UART_LCR, 0xBF);
+		serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B);
 		serial_outp(up, UART_EFR, efr);
 	}
 
@@ -2435,7 +2477,8 @@ serial8250_set_ldisc(struct uart_port *port, int new)
 void serial8250_do_pm(struct uart_port *port, unsigned int state,
 		      unsigned int oldstate)
 {
-	struct uart_8250_port *p = (struct uart_8250_port *)port;
+	struct uart_8250_port *p =
+		container_of(port, struct uart_8250_port, port);
 
 	serial8250_set_sleep(p, state != 0);
 }
@@ -2476,6 +2519,7 @@ static int serial8250_request_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32:
 	case UPIO_MEM:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		if (!up->port.mapbase)
 			break;
 
@@ -2513,6 +2557,7 @@ static void serial8250_release_std_resource(struct uart_8250_port *up)
 	case UPIO_MEM32:
 	case UPIO_MEM:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		if (!up->port.mapbase)
 			break;
 
@@ -2566,7 +2611,8 @@ static void serial8250_release_rsa_resource(struct uart_8250_port *up)
 
 static void serial8250_release_port(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	serial8250_release_std_resource(up);
 	if (up->port.type == PORT_RSA)
@@ -2575,7 +2621,8 @@ static void serial8250_release_port(struct uart_port *port)
 
 static int serial8250_request_port(struct uart_port *port)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	int ret = 0;
 
 	ret = serial8250_request_std_resource(up);
@@ -2590,7 +2637,8 @@ static int serial8250_request_port(struct uart_port *port)
 
 static void serial8250_config_port(struct uart_port *port, int flags)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 	int probeflags = PROBE_ANY;
 	int ret;
 
@@ -2771,7 +2819,8 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 
 static void serial8250_console_putchar(struct uart_port *port, int ch)
 {
-	struct uart_8250_port *up = (struct uart_8250_port *)port;
+	struct uart_8250_port *up =
+		container_of(port, struct uart_8250_port, port);
 
 	wait_for_xmitr(up, UART_LSR_THRE);
 	serial_out(up, UART_TX, ch);
@@ -2872,7 +2921,7 @@ static struct console serial8250_console = {
 	.device		= uart_console_device,
 	.setup		= serial8250_console_setup,
 	.early_setup	= serial8250_console_early_setup,
-	.flags		= CON_PRINTBUFFER,
+	.flags		= CON_PRINTBUFFER | CON_ANYTIME,
 	.index		= -1,
 	.data		= &serial8250_reg,
 };
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 53be4d35a0a..8b8930f700b 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -957,6 +957,22 @@ pci_default_setup(struct serial_private *priv,
 	return setup_port(priv, port, bar, offset, board->reg_shift);
 }
 
+static int
+ce4100_serial_setup(struct serial_private *priv,
+		  const struct pciserial_board *board,
+		  struct uart_port *port, int idx)
+{
+	int ret;
+
+	ret = setup_port(priv, port, 0, 0, board->reg_shift);
+	port->iotype = UPIO_MEM32;
+	port->type = PORT_XSCALE;
+	port->flags = (port->flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+	port->regshift = 2;
+
+	return ret;
+}
+
 static int skip_tx_en_setup(struct serial_private *priv,
 			const struct pciserial_board *board,
 			struct uart_port *port, int idx)
@@ -981,6 +997,7 @@ static int skip_tx_en_setup(struct serial_private *priv,
 #define PCI_SUBDEVICE_ID_POCTAL232	0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
 #define PCI_VENDOR_ID_ADVANTECH		0x13fe
+#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
 #define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
 #define PCI_DEVICE_ID_TITAN_200I	0x8028
 #define PCI_DEVICE_ID_TITAN_400I	0x8048
@@ -1072,6 +1089,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= skip_tx_en_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_CE4100_UART,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= ce4100_serial_setup,
+	},
 	/*
 	 * ITE
 	 */
@@ -1592,6 +1616,7 @@ enum pci_board_num_t {
 	pbn_ADDIDATA_PCIe_2_3906250,
 	pbn_ADDIDATA_PCIe_4_3906250,
 	pbn_ADDIDATA_PCIe_8_3906250,
+	pbn_ce4100_1_115200,
 };
 
 /*
@@ -2281,10 +2306,18 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.uart_offset	= 0x200,
 		.first_offset	= 0x1000,
 	},
+	[pbn_ce4100_1_115200] = {
+		.flags		= FL_BASE0,
+		.num_ports	= 1,
+		.base_baud	= 921600,
+		.reg_shift      = 2,
+	},
 };
 
 static const struct pci_device_id softmodem_blacklist[] = {
 	{ PCI_VDEVICE(AL, 0x5457), }, /* ALi Corporation M5457 AC'97 Modem */
+	{ PCI_VDEVICE(MOTOROLA, 0x3052), }, /* Motorola Si3052-based modem */
+	{ PCI_DEVICE(0x1543, 0x3052), }, /* Si3052-based modem, default IDs */
 };
 
 /*
@@ -2863,6 +2896,9 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL,
 		0, 0,
 		pbn_b0_4_1152000 },
+	{	PCI_VENDOR_ID_OXSEMI, 0x9505,
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+		pbn_b0_bt_2_921600 },
 
 		/*
 		 * The below card is a little controversial since it is the
@@ -3760,6 +3796,11 @@ static struct pci_device_id serial_pci_tbl[] = {
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9865,
 		0xA000, 0x3004,
 		0, 0, pbn_b0_bt_4_115200 },
+	/* Intel CE4100 */
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
+		PCI_ANY_ID,  PCI_ANY_ID, 0, 0,
+		pbn_ce4100_1_115200 },
+
 
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index aff9dcd051c..ec3c214598d 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -1381,6 +1381,16 @@ config SERIAL_MSM_CONSOLE
 	depends on SERIAL_MSM=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_VT8500
+	bool "VIA VT8500 on-chip serial port support"
+	depends on ARM && ARCH_VT8500
+	select SERIAL_CORE
+
+config SERIAL_VT8500_CONSOLE
+	bool "VIA VT8500 serial console support"
+	depends on SERIAL_VT8500=y
+	select SERIAL_CORE_CONSOLE
+
 config SERIAL_NETX
 	tristate "NetX serial port support"
 	depends on ARM && ARCH_NETX
@@ -1632,4 +1642,19 @@ config SERIAL_ALTERA_UART_CONSOLE
 	help
 	  Enable a Altera UART port to be the system console.
 
+config SERIAL_IFX6X60
+        tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
+	depends on GPIOLIB && SPI && EXPERIMENTAL
+	help
+	  Support for the IFX6x60 modem devices on Intel MID platforms.
+
+config SERIAL_PCH_UART
+	tristate "Intel EG20T PCH UART"
+	depends on PCI && DMADEVICES
+	select SERIAL_CORE
+	select PCH_DMA
+	help
+	  This driver is for PCH(Platform controller Hub) UART of Intel EG20T
+	  which is an IOH(Input/Output Hub) for x86 embedded processor.
+	  Enabling PCH_DMA, this PCH UART works as DMA mode.
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index c5705765454..8ea92e9c73b 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -80,12 +80,15 @@ obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL) += nwpserial.o
 obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
 obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
 obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
 obj-$(CONFIG_SERIAL_TIMBERDALE)	+= timbuart.o
 obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
 obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o
 obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
+obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o
 obj-$(CONFIG_SERIAL_MRST_MAX3110)	+= mrst_max3110.o
 obj-$(CONFIG_SERIAL_MFD_HSU)	+= mfd.o
-obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
+obj-$(CONFIG_SERIAL_IFX6X60)  	+= ifx6x60.o
+obj-$(CONFIG_SERIAL_PCH_UART)	+= pch_uart.o
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 6ca7a44f29c..e76d7d00012 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -7,6 +7,7 @@
  *
  *  Copyright 1999 ARM Limited
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *  Copyright (C) 2010 ST-Ericsson SA
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -48,6 +49,9 @@
 #include <linux/amba/serial.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
@@ -63,21 +67,6 @@
 #define UART_DR_ERROR		(UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE)
 #define UART_DUMMY_DR_RX	(1 << 16)
 
-/*
- * We wrap our port structure around the generic uart_port.
- */
-struct uart_amba_port {
-	struct uart_port	port;
-	struct clk		*clk;
-	unsigned int		im;		/* interrupt mask */
-	unsigned int		old_status;
-	unsigned int		ifls;		/* vendor-specific */
-	unsigned int		lcrh_tx;	/* vendor-specific */
-	unsigned int		lcrh_rx;	/* vendor-specific */
-	bool			oversampling;   /* vendor-specific */
-	bool			autorts;
-};
-
 /* There is by now at least one vendor with differing details, so handle it */
 struct vendor_data {
 	unsigned int		ifls;
@@ -85,6 +74,7 @@ struct vendor_data {
 	unsigned int		lcrh_tx;
 	unsigned int		lcrh_rx;
 	bool			oversampling;
+	bool			dma_threshold;
 };
 
 static struct vendor_data vendor_arm = {
@@ -93,6 +83,7 @@ static struct vendor_data vendor_arm = {
 	.lcrh_tx		= UART011_LCRH,
 	.lcrh_rx		= UART011_LCRH,
 	.oversampling		= false,
+	.dma_threshold		= false,
 };
 
 static struct vendor_data vendor_st = {
@@ -101,22 +92,535 @@ static struct vendor_data vendor_st = {
 	.lcrh_tx		= ST_UART011_LCRH_TX,
 	.lcrh_rx		= ST_UART011_LCRH_RX,
 	.oversampling		= true,
+	.dma_threshold		= true,
+};
+
+/* Deals with DMA transactions */
+struct pl011_dmatx_data {
+	struct dma_chan		*chan;
+	struct scatterlist	sg;
+	char			*buf;
+	bool			queued;
 };
 
+/*
+ * We wrap our port structure around the generic uart_port.
+ */
+struct uart_amba_port {
+	struct uart_port	port;
+	struct clk		*clk;
+	const struct vendor_data *vendor;
+	unsigned int		dmacr;		/* dma control reg */
+	unsigned int		im;		/* interrupt mask */
+	unsigned int		old_status;
+	unsigned int		fifosize;	/* vendor-specific */
+	unsigned int		lcrh_tx;	/* vendor-specific */
+	unsigned int		lcrh_rx;	/* vendor-specific */
+	bool			autorts;
+	char			type[12];
+#ifdef CONFIG_DMA_ENGINE
+	/* DMA stuff */
+	bool			using_dma;
+	struct pl011_dmatx_data	dmatx;
+#endif
+};
+
+/*
+ * All the DMA operation mode stuff goes inside this ifdef.
+ * This assumes that you have a generic DMA device interface,
+ * no custom DMA interfaces are supported.
+ */
+#ifdef CONFIG_DMA_ENGINE
+
+#define PL011_DMA_BUFFER_SIZE PAGE_SIZE
+
+static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
+{
+	/* DMA is the sole user of the platform data right now */
+	struct amba_pl011_data *plat = uap->port.dev->platform_data;
+	struct dma_slave_config tx_conf = {
+		.dst_addr = uap->port.mapbase + UART01x_DR,
+		.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
+		.direction = DMA_TO_DEVICE,
+		.dst_maxburst = uap->fifosize >> 1,
+	};
+	struct dma_chan *chan;
+	dma_cap_mask_t mask;
+
+	/* We need platform data */
+	if (!plat || !plat->dma_filter) {
+		dev_info(uap->port.dev, "no DMA platform data\n");
+		return;
+	}
+
+	/* Try to acquire a generic DMA engine slave channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param);
+	if (!chan) {
+		dev_err(uap->port.dev, "no TX DMA channel!\n");
+		return;
+	}
+
+	dmaengine_slave_config(chan, &tx_conf);
+	uap->dmatx.chan = chan;
+
+	dev_info(uap->port.dev, "DMA channel TX %s\n",
+		 dma_chan_name(uap->dmatx.chan));
+}
+
+#ifndef MODULE
+/*
+ * Stack up the UARTs and let the above initcall be done at device
+ * initcall time, because the serial driver is called as an arch
+ * initcall, and at this time the DMA subsystem is not yet registered.
+ * At this point the driver will switch over to using DMA where desired.
+ */
+struct dma_uap {
+	struct list_head node;
+	struct uart_amba_port *uap;
+};
+
+static LIST_HEAD(pl011_dma_uarts);
+
+static int __init pl011_dma_initcall(void)
+{
+	struct list_head *node, *tmp;
+
+	list_for_each_safe(node, tmp, &pl011_dma_uarts) {
+		struct dma_uap *dmau = list_entry(node, struct dma_uap, node);
+		pl011_dma_probe_initcall(dmau->uap);
+		list_del(node);
+		kfree(dmau);
+	}
+	return 0;
+}
+
+device_initcall(pl011_dma_initcall);
+
+static void pl011_dma_probe(struct uart_amba_port *uap)
+{
+	struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL);
+	if (dmau) {
+		dmau->uap = uap;
+		list_add_tail(&dmau->node, &pl011_dma_uarts);
+	}
+}
+#else
+static void pl011_dma_probe(struct uart_amba_port *uap)
+{
+	pl011_dma_probe_initcall(uap);
+}
+#endif
+
+static void pl011_dma_remove(struct uart_amba_port *uap)
+{
+	/* TODO: remove the initcall if it has not yet executed */
+	if (uap->dmatx.chan)
+		dma_release_channel(uap->dmatx.chan);
+}
+
+
+/* Forward declare this for the refill routine */
+static int pl011_dma_tx_refill(struct uart_amba_port *uap);
+
+/*
+ * The current DMA TX buffer has been sent.
+ * Try to queue up another DMA buffer.
+ */
+static void pl011_dma_tx_callback(void *data)
+{
+	struct uart_amba_port *uap = data;
+	struct pl011_dmatx_data *dmatx = &uap->dmatx;
+	unsigned long flags;
+	u16 dmacr;
+
+	spin_lock_irqsave(&uap->port.lock, flags);
+	if (uap->dmatx.queued)
+		dma_unmap_sg(dmatx->chan->device->dev, &dmatx->sg, 1,
+			     DMA_TO_DEVICE);
+
+	dmacr = uap->dmacr;
+	uap->dmacr = dmacr & ~UART011_TXDMAE;
+	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+
+	/*
+	 * If TX DMA was disabled, it means that we've stopped the DMA for
+	 * some reason (eg, XOFF received, or we want to send an X-char.)
+	 *
+	 * Note: we need to be careful here of a potential race between DMA
+	 * and the rest of the driver - if the driver disables TX DMA while
+	 * a TX buffer completing, we must update the tx queued status to
+	 * get further refills (hence we check dmacr).
+	 */
+	if (!(dmacr & UART011_TXDMAE) || uart_tx_stopped(&uap->port) ||
+	    uart_circ_empty(&uap->port.state->xmit)) {
+		uap->dmatx.queued = false;
+		spin_unlock_irqrestore(&uap->port.lock, flags);
+		return;
+	}
+
+	if (pl011_dma_tx_refill(uap) <= 0) {
+		/*
+		 * We didn't queue a DMA buffer for some reason, but we
+		 * have data pending to be sent.  Re-enable the TX IRQ.
+		 */
+		uap->im |= UART011_TXIM;
+		writew(uap->im, uap->port.membase + UART011_IMSC);
+	}
+	spin_unlock_irqrestore(&uap->port.lock, flags);
+}
+
+/*
+ * Try to refill the TX DMA buffer.
+ * Locking: called with port lock held and IRQs disabled.
+ * Returns:
+ *   1 if we queued up a TX DMA buffer.
+ *   0 if we didn't want to handle this by DMA
+ *  <0 on error
+ */
+static int pl011_dma_tx_refill(struct uart_amba_port *uap)
+{
+	struct pl011_dmatx_data *dmatx = &uap->dmatx;
+	struct dma_chan *chan = dmatx->chan;
+	struct dma_device *dma_dev = chan->device;
+	struct dma_async_tx_descriptor *desc;
+	struct circ_buf *xmit = &uap->port.state->xmit;
+	unsigned int count;
+
+	/*
+	 * Try to avoid the overhead involved in using DMA if the
+	 * transaction fits in the first half of the FIFO, by using
+	 * the standard interrupt handling.  This ensures that we
+	 * issue a uart_write_wakeup() at the appropriate time.
+	 */
+	count = uart_circ_chars_pending(xmit);
+	if (count < (uap->fifosize >> 1)) {
+		uap->dmatx.queued = false;
+		return 0;
+	}
+
+	/*
+	 * Bodge: don't send the last character by DMA, as this
+	 * will prevent XON from notifying us to restart DMA.
+	 */
+	count -= 1;
+
+	/* Else proceed to copy the TX chars to the DMA buffer and fire DMA */
+	if (count > PL011_DMA_BUFFER_SIZE)
+		count = PL011_DMA_BUFFER_SIZE;
+
+	if (xmit->tail < xmit->head)
+		memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], count);
+	else {
+		size_t first = UART_XMIT_SIZE - xmit->tail;
+		size_t second = xmit->head;
+
+		memcpy(&dmatx->buf[0], &xmit->buf[xmit->tail], first);
+		if (second)
+			memcpy(&dmatx->buf[first], &xmit->buf[0], second);
+	}
+
+	dmatx->sg.length = count;
+
+	if (dma_map_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE) != 1) {
+		uap->dmatx.queued = false;
+		dev_dbg(uap->port.dev, "unable to map TX DMA\n");
+		return -EBUSY;
+	}
+
+	desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE,
+					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE);
+		uap->dmatx.queued = false;
+		/*
+		 * If DMA cannot be used right now, we complete this
+		 * transaction via IRQ and let the TTY layer retry.
+		 */
+		dev_dbg(uap->port.dev, "TX DMA busy\n");
+		return -EBUSY;
+	}
+
+	/* Some data to go along to the callback */
+	desc->callback = pl011_dma_tx_callback;
+	desc->callback_param = uap;
+
+	/* All errors should happen at prepare time */
+	dmaengine_submit(desc);
+
+	/* Fire the DMA transaction */
+	dma_dev->device_issue_pending(chan);
+
+	uap->dmacr |= UART011_TXDMAE;
+	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	uap->dmatx.queued = true;
+
+	/*
+	 * Now we know that DMA will fire, so advance the ring buffer
+	 * with the stuff we just dispatched.
+	 */
+	xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+	uap->port.icount.tx += count;
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(&uap->port);
+
+	return 1;
+}
+
+/*
+ * We received a transmit interrupt without a pending X-char but with
+ * pending characters.
+ * Locking: called with port lock held and IRQs disabled.
+ * Returns:
+ *   false if we want to use PIO to transmit
+ *   true if we queued a DMA buffer
+ */
+static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
+{
+	if (!uap->using_dma)
+		return false;
+
+	/*
+	 * If we already have a TX buffer queued, but received a
+	 * TX interrupt, it will be because we've just sent an X-char.
+	 * Ensure the TX DMA is enabled and the TX IRQ is disabled.
+	 */
+	if (uap->dmatx.queued) {
+		uap->dmacr |= UART011_TXDMAE;
+		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+		uap->im &= ~UART011_TXIM;
+		writew(uap->im, uap->port.membase + UART011_IMSC);
+		return true;
+	}
+
+	/*
+	 * We don't have a TX buffer queued, so try to queue one.
+	 * If we succesfully queued a buffer, mask the TX IRQ.
+	 */
+	if (pl011_dma_tx_refill(uap) > 0) {
+		uap->im &= ~UART011_TXIM;
+		writew(uap->im, uap->port.membase + UART011_IMSC);
+		return true;
+	}
+	return false;
+}
+
+/*
+ * Stop the DMA transmit (eg, due to received XOFF).
+ * Locking: called with port lock held and IRQs disabled.
+ */
+static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
+{
+	if (uap->dmatx.queued) {
+		uap->dmacr &= ~UART011_TXDMAE;
+		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	}
+}
+
+/*
+ * Try to start a DMA transmit, or in the case of an XON/OFF
+ * character queued for send, try to get that character out ASAP.
+ * Locking: called with port lock held and IRQs disabled.
+ * Returns:
+ *   false if we want the TX IRQ to be enabled
+ *   true if we have a buffer queued
+ */
+static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
+{
+	u16 dmacr;
+
+	if (!uap->using_dma)
+		return false;
+
+	if (!uap->port.x_char) {
+		/* no X-char, try to push chars out in DMA mode */
+		bool ret = true;
+
+		if (!uap->dmatx.queued) {
+			if (pl011_dma_tx_refill(uap) > 0) {
+				uap->im &= ~UART011_TXIM;
+				ret = true;
+			} else {
+				uap->im |= UART011_TXIM;
+				ret = false;
+			}
+			writew(uap->im, uap->port.membase + UART011_IMSC);
+		} else if (!(uap->dmacr & UART011_TXDMAE)) {
+			uap->dmacr |= UART011_TXDMAE;
+			writew(uap->dmacr,
+				       uap->port.membase + UART011_DMACR);
+		}
+		return ret;
+	}
+
+	/*
+	 * We have an X-char to send.  Disable DMA to prevent it loading
+	 * the TX fifo, and then see if we can stuff it into the FIFO.
+	 */
+	dmacr = uap->dmacr;
+	uap->dmacr &= ~UART011_TXDMAE;
+	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+
+	if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) {
+		/*
+		 * No space in the FIFO, so enable the transmit interrupt
+		 * so we know when there is space.  Note that once we've
+		 * loaded the character, we should just re-enable DMA.
+		 */
+		return false;
+	}
+
+	writew(uap->port.x_char, uap->port.membase + UART01x_DR);
+	uap->port.icount.tx++;
+	uap->port.x_char = 0;
+
+	/* Success - restore the DMA state */
+	uap->dmacr = dmacr;
+	writew(dmacr, uap->port.membase + UART011_DMACR);
+
+	return true;
+}
+
+/*
+ * Flush the transmit buffer.
+ * Locking: called with port lock held and IRQs disabled.
+ */
+static void pl011_dma_flush_buffer(struct uart_port *port)
+{
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+
+	if (!uap->using_dma)
+		return;
+
+	/* Avoid deadlock with the DMA engine callback */
+	spin_unlock(&uap->port.lock);
+	dmaengine_terminate_all(uap->dmatx.chan);
+	spin_lock(&uap->port.lock);
+	if (uap->dmatx.queued) {
+		dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
+			     DMA_TO_DEVICE);
+		uap->dmatx.queued = false;
+		uap->dmacr &= ~UART011_TXDMAE;
+		writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	}
+}
+
+
+static void pl011_dma_startup(struct uart_amba_port *uap)
+{
+	if (!uap->dmatx.chan)
+		return;
+
+	uap->dmatx.buf = kmalloc(PL011_DMA_BUFFER_SIZE, GFP_KERNEL);
+	if (!uap->dmatx.buf) {
+		dev_err(uap->port.dev, "no memory for DMA TX buffer\n");
+		uap->port.fifosize = uap->fifosize;
+		return;
+	}
+
+	sg_init_one(&uap->dmatx.sg, uap->dmatx.buf, PL011_DMA_BUFFER_SIZE);
+
+	/* The DMA buffer is now the FIFO the TTY subsystem can use */
+	uap->port.fifosize = PL011_DMA_BUFFER_SIZE;
+	uap->using_dma = true;
+
+	/* Turn on DMA error (RX/TX will be enabled on demand) */
+	uap->dmacr |= UART011_DMAONERR;
+	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+
+	/*
+	 * ST Micro variants has some specific dma burst threshold
+	 * compensation. Set this to 16 bytes, so burst will only
+	 * be issued above/below 16 bytes.
+	 */
+	if (uap->vendor->dma_threshold)
+		writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16,
+			       uap->port.membase + ST_UART011_DMAWM);
+}
+
+static void pl011_dma_shutdown(struct uart_amba_port *uap)
+{
+	if (!uap->using_dma)
+		return;
+
+	/* Disable RX and TX DMA */
+	while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
+		barrier();
+
+	spin_lock_irq(&uap->port.lock);
+	uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE);
+	writew(uap->dmacr, uap->port.membase + UART011_DMACR);
+	spin_unlock_irq(&uap->port.lock);
+
+	/* In theory, this should already be done by pl011_dma_flush_buffer */
+	dmaengine_terminate_all(uap->dmatx.chan);
+	if (uap->dmatx.queued) {
+		dma_unmap_sg(uap->dmatx.chan->device->dev, &uap->dmatx.sg, 1,
+			     DMA_TO_DEVICE);
+		uap->dmatx.queued = false;
+	}
+
+	kfree(uap->dmatx.buf);
+
+	uap->using_dma = false;
+}
+
+#else
+/* Blank functions if the DMA engine is not available */
+static inline void pl011_dma_probe(struct uart_amba_port *uap)
+{
+}
+
+static inline void pl011_dma_remove(struct uart_amba_port *uap)
+{
+}
+
+static inline void pl011_dma_startup(struct uart_amba_port *uap)
+{
+}
+
+static inline void pl011_dma_shutdown(struct uart_amba_port *uap)
+{
+}
+
+static inline bool pl011_dma_tx_irq(struct uart_amba_port *uap)
+{
+	return false;
+}
+
+static inline void pl011_dma_tx_stop(struct uart_amba_port *uap)
+{
+}
+
+static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
+{
+	return false;
+}
+
+#define pl011_dma_flush_buffer	NULL
+#endif
+
+
 static void pl011_stop_tx(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 
 	uap->im &= ~UART011_TXIM;
 	writew(uap->im, uap->port.membase + UART011_IMSC);
+	pl011_dma_tx_stop(uap);
 }
 
 static void pl011_start_tx(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 
-	uap->im |= UART011_TXIM;
-	writew(uap->im, uap->port.membase + UART011_IMSC);
+	if (!pl011_dma_tx_start(uap)) {
+		uap->im |= UART011_TXIM;
+		writew(uap->im, uap->port.membase + UART011_IMSC);
+	}
 }
 
 static void pl011_stop_rx(struct uart_port *port)
@@ -203,7 +707,11 @@ static void pl011_tx_chars(struct uart_amba_port *uap)
 		return;
 	}
 
-	count = uap->port.fifosize >> 1;
+	/* If we are using DMA mode, try to send some characters. */
+	if (pl011_dma_tx_irq(uap))
+		return;
+
+	count = uap->fifosize >> 1;
 	do {
 		writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -246,10 +754,11 @@ static void pl011_modem_status(struct uart_amba_port *uap)
 static irqreturn_t pl011_int(int irq, void *dev_id)
 {
 	struct uart_amba_port *uap = dev_id;
+	unsigned long flags;
 	unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
 	int handled = 0;
 
-	spin_lock(&uap->port.lock);
+	spin_lock_irqsave(&uap->port.lock, flags);
 
 	status = readw(uap->port.membase + UART011_MIS);
 	if (status) {
@@ -274,7 +783,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 		handled = 1;
 	}
 
-	spin_unlock(&uap->port.lock);
+	spin_unlock_irqrestore(&uap->port.lock, flags);
 
 	return IRQ_RETVAL(handled);
 }
@@ -396,7 +905,7 @@ static int pl011_startup(struct uart_port *port)
 	if (retval)
 		goto clk_dis;
 
-	writew(uap->ifls, uap->port.membase + UART011_IFLS);
+	writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS);
 
 	/*
 	 * Provoke TX FIFO interrupt into asserting.
@@ -423,11 +932,18 @@ static int pl011_startup(struct uart_port *port)
 	cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE;
 	writew(cr, uap->port.membase + UART011_CR);
 
+	/* Clear pending error interrupts */
+	writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS,
+	       uap->port.membase + UART011_ICR);
+
 	/*
 	 * initialise the old status of the modem signals
 	 */
 	uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
 
+	/* Startup DMA */
+	pl011_dma_startup(uap);
+
 	/*
 	 * Finally, enable interrupts
 	 */
@@ -467,6 +983,8 @@ static void pl011_shutdown(struct uart_port *port)
 	writew(0xffff, uap->port.membase + UART011_ICR);
 	spin_unlock_irq(&uap->port.lock);
 
+	pl011_dma_shutdown(uap);
+
 	/*
 	 * Free the interrupt
 	 */
@@ -498,13 +1016,18 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 	unsigned int lcr_h, old_cr;
 	unsigned long flags;
-	unsigned int baud, quot;
+	unsigned int baud, quot, clkdiv;
+
+	if (uap->vendor->oversampling)
+		clkdiv = 8;
+	else
+		clkdiv = 16;
 
 	/*
 	 * Ask the core to calculate the divisor for us.
 	 */
 	baud = uart_get_baud_rate(port, termios, old, 0,
-				  port->uartclk/(uap->oversampling ? 8 : 16));
+				  port->uartclk / clkdiv);
 
 	if (baud > port->uartclk/16)
 		quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
@@ -532,7 +1055,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 		if (!(termios->c_cflag & PARODD))
 			lcr_h |= UART01x_LCRH_EPS;
 	}
-	if (port->fifosize > 1)
+	if (uap->fifosize > 1)
 		lcr_h |= UART01x_LCRH_FEN;
 
 	spin_lock_irqsave(&port->lock, flags);
@@ -588,8 +1111,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 		uap->autorts = false;
 	}
 
-	if (uap->oversampling) {
-		if (baud > port->uartclk/16)
+	if (uap->vendor->oversampling) {
+		if (baud > port->uartclk / 16)
 			old_cr |= ST_UART011_CR_OVSFACT;
 		else
 			old_cr &= ~ST_UART011_CR_OVSFACT;
@@ -622,7 +1145,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
 
 static const char *pl011_type(struct uart_port *port)
 {
-	return port->type == PORT_AMBA ? "AMBA/PL011" : NULL;
+	struct uart_amba_port *uap = (struct uart_amba_port *)port;
+	return uap->port.type == PORT_AMBA ? uap->type : NULL;
 }
 
 /*
@@ -679,6 +1203,7 @@ static struct uart_ops amba_pl011_pops = {
 	.break_ctl	= pl011_break_ctl,
 	.startup	= pl011_startup,
 	.shutdown	= pl011_shutdown,
+	.flush_buffer	= pl011_dma_flush_buffer,
 	.set_termios	= pl011_set_termios,
 	.type		= pl011_type,
 	.release_port	= pl010_release_port,
@@ -761,7 +1286,7 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
 
 		*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
 
-		if (uap->oversampling) {
+		if (uap->vendor->oversampling) {
 			if (readw(uap->port.membase + UART011_CR)
 				  & ST_UART011_CR_OVSFACT)
 				*baud *= 2;
@@ -858,19 +1383,22 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 		goto unmap;
 	}
 
-	uap->ifls = vendor->ifls;
+	uap->vendor = vendor;
 	uap->lcrh_rx = vendor->lcrh_rx;
 	uap->lcrh_tx = vendor->lcrh_tx;
-	uap->oversampling = vendor->oversampling;
+	uap->fifosize = vendor->fifosize;
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;
 	uap->port.iotype = UPIO_MEM;
 	uap->port.irq = dev->irq[0];
-	uap->port.fifosize = vendor->fifosize;
+	uap->port.fifosize = uap->fifosize;
 	uap->port.ops = &amba_pl011_pops;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = i;
+	pl011_dma_probe(uap);
+
+	snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
 
 	amba_ports[i] = uap;
 
@@ -879,6 +1407,7 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 	if (ret) {
 		amba_set_drvdata(dev, NULL);
 		amba_ports[i] = NULL;
+		pl011_dma_remove(uap);
 		clk_put(uap->clk);
  unmap:
 		iounmap(base);
@@ -902,6 +1431,7 @@ static int pl011_remove(struct amba_device *dev)
 		if (amba_ports[i] == uap)
 			amba_ports[i] = NULL;
 
+	pl011_dma_remove(uap);
 	iounmap(uap->port.membase);
 	clk_put(uap->clk);
 	kfree(uap);
diff --git a/drivers/serial/apbuart.c b/drivers/serial/apbuart.c
index cc01c650a14..095a5d56261 100644
--- a/drivers/serial/apbuart.c
+++ b/drivers/serial/apbuart.c
@@ -26,6 +26,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/serial_core.h>
@@ -520,11 +521,12 @@ static struct console grlib_apbuart_console = {
 };
 
 
-static void grlib_apbuart_configure(void);
+static int grlib_apbuart_configure(void);
 
 static int __init apbuart_console_init(void)
 {
-	grlib_apbuart_configure();
+	if (grlib_apbuart_configure())
+		return -ENODEV;
 	register_console(&grlib_apbuart_console);
 	return 0;
 }
@@ -573,13 +575,15 @@ static int __devinit apbuart_probe(struct platform_device *op,
 	printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n",
 	       (unsigned long long) port->mapbase, port->irq);
 	return 0;
-
 }
 
 static struct of_device_id __initdata apbuart_match[] = {
 	{
 	 .name = "GAISLER_APBUART",
 	 },
+	{
+	 .name = "01_00c",
+	 },
 	{},
 };
 
@@ -593,54 +597,49 @@ static struct of_platform_driver grlib_apbuart_of_driver = {
 };
 
 
-static void grlib_apbuart_configure(void)
+static int grlib_apbuart_configure(void)
 {
-	static int enum_done;
 	struct device_node *np, *rp;
-	struct uart_port *port = NULL;
 	const u32 *prop;
-	int freq_khz;
-	int v = 0, d = 0;
-	unsigned int addr;
-	int irq, line;
-	struct amba_prom_registers *regs;
-
-	if (enum_done)
-		return;
+	int freq_khz, line = 0;
 
 	/* Get bus frequency */
 	rp = of_find_node_by_path("/");
+	if (!rp)
+		return -ENODEV;
 	rp = of_get_next_child(rp, NULL);
+	if (!rp)
+		return -ENODEV;
 	prop = of_get_property(rp, "clock-frequency", NULL);
+	if (!prop)
+		return -ENODEV;
 	freq_khz = *prop;
 
-	line = 0;
 	for_each_matching_node(np, apbuart_match) {
+		const int *irqs, *ampopts;
+		const struct amba_prom_registers *regs;
+		struct uart_port *port;
+		unsigned long addr;
 
-		int *vendor = (int *) of_get_property(np, "vendor", NULL);
-		int *device = (int *) of_get_property(np, "device", NULL);
-		int *irqs = (int *) of_get_property(np, "interrupts", NULL);
-		regs = (struct amba_prom_registers *)
-		    of_get_property(np, "reg", NULL);
+		ampopts = of_get_property(np, "ampopts", NULL);
+		if (ampopts && (*ampopts == 0))
+			continue; /* Ignore if used by another OS instance */
 
-		if (vendor)
-			v = *vendor;
-		if (device)
-			d = *device;
+		irqs = of_get_property(np, "interrupts", NULL);
+		regs = of_get_property(np, "reg", NULL);
 
 		if (!irqs || !regs)
-			return;
+			continue;
 
 		grlib_apbuart_nodes[line] = np;
 
 		addr = regs->phys_addr;
-		irq = *irqs;
 
 		port = &grlib_apbuart_ports[line];
 
 		port->mapbase = addr;
 		port->membase = ioremap(addr, sizeof(struct grlib_apbuart_regs_map));
-		port->irq = irq;
+		port->irq = *irqs;
 		port->iotype = UPIO_MEM;
 		port->ops = &grlib_apbuart_ops;
 		port->flags = UPF_BOOT_AUTOCONF;
@@ -652,12 +651,10 @@ static void grlib_apbuart_configure(void)
 		/* We support maximum UART_NR uarts ... */
 		if (line == UART_NR)
 			break;
-
 	}
 
-	enum_done = 1;
-
 	grlib_apbuart_driver.nr = grlib_apbuart_port_nr = line;
+	return line ? 0 : -ENODEV;
 }
 
 static int __init grlib_apbuart_init(void)
@@ -665,7 +662,9 @@ static int __init grlib_apbuart_init(void)
 	int ret;
 
 	/* Find all APBUARTS in device the tree and initialize their ports */
-	grlib_apbuart_configure();
+	ret = grlib_apbuart_configure();
+	if (ret)
+		return ret;
 
 	printk(KERN_INFO "Serial: GRLIB APBUART driver\n");
 
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index a9eff2b18ea..19cac9f610f 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -23,6 +23,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/serial_core.h>
+#include <linux/dma-mapping.h>
 
 #if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \
 	defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE)
@@ -33,12 +34,10 @@
 #include <asm/gpio.h>
 #include <mach/bfin_serial_5xx.h>
 
-#ifdef CONFIG_SERIAL_BFIN_DMA
-#include <linux/dma-mapping.h>
+#include <asm/dma.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/cacheflush.h>
-#endif
 
 #ifdef CONFIG_SERIAL_BFIN_MODULE
 # undef CONFIG_EARLY_PRINTK
@@ -360,7 +359,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart)
 		UART_PUT_CHAR(uart, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		uart->port.icount.tx++;
-		SSYNC();
 	}
 
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -688,6 +686,13 @@ static int bfin_serial_startup(struct uart_port *port)
 
 # ifdef CONFIG_BF54x
 	{
+		/*
+		 * UART2 and UART3 on BF548 share interrupt PINs and DMA
+		 * controllers with SPORT2 and SPORT3. UART rx and tx
+		 * interrupts are generated in PIO mode only when configure
+		 * their peripheral mapping registers properly, which means
+		 * request corresponding DMA channels in PIO mode as well.
+		 */
 		unsigned uart_dma_ch_rx, uart_dma_ch_tx;
 
 		switch (uart->port.irq) {
@@ -734,8 +739,7 @@ static int bfin_serial_startup(struct uart_port *port)
 			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
 			IRQF_DISABLED, "BFIN_UART_CTS", uart)) {
 			uart->cts_pin = -1;
-			pr_info("Unable to attach BlackFin UART CTS interrupt.\
-				 So, disable it.\n");
+			pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
 		}
 	}
 	if (uart->rts_pin >= 0) {
@@ -747,8 +751,7 @@ static int bfin_serial_startup(struct uart_port *port)
 	if (request_irq(uart->status_irq,
 		bfin_serial_mctrl_cts_int,
 		IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
-		pr_info("Unable to attach BlackFin UART Modem \
-			Status interrupt.\n");
+		pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
 	}
 
 	/* CTS RTS PINs are negative assertive. */
@@ -846,6 +849,8 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (termios->c_cflag & CMSPAR)
 		lcr |= STP;
 
+	spin_lock_irqsave(&uart->port.lock, flags);
+
 	port->read_status_mask = OE;
 	if (termios->c_iflag & INPCK)
 		port->read_status_mask |= (FE | PE);
@@ -875,8 +880,6 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
 	if (termios->c_line != N_IRDA)
 		quot -= ANOMALY_05000230;
 
-	spin_lock_irqsave(&uart->port.lock, flags);
-
 	UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
 
 	/* Disable UART */
@@ -1321,6 +1324,14 @@ struct console __init *bfin_earlyserial_init(unsigned int port,
 	struct bfin_serial_port *uart;
 	struct ktermios t;
 
+#ifdef CONFIG_SERIAL_BFIN_CONSOLE
+	/*
+	 * If we are using early serial, don't let the normal console rewind
+	 * log buffer, since that causes things to be printed multiple times
+	 */
+	bfin_serial_console.flags &= ~CON_PRINTBUFFER;
+#endif
+
 	if (port == -1 || port >= nr_active_ports)
 		port = 0;
 	bfin_serial_init_ports();
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index 7274b527a3c..b754dcf0fda 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -76,18 +76,12 @@ struct uart_cpm_port {
 	unsigned char		*tx_buf;
 	unsigned char		*rx_buf;
 	u32			flags;
-	void			(*set_lineif)(struct uart_cpm_port *);
 	struct clk		*clk;
 	u8			brg;
 	uint			 dp_addr;
 	void			*mem_addr;
 	dma_addr_t		 dma_addr;
 	u32			mem_size;
-	/* helpers */
-	int			 baud;
-	int			 bits;
-	/* Keep track of 'odd' SMC2 wirings */
-	int			is_portb;
 	/* wait on close if needed */
 	int			wait_closing;
 	/* value to combine with opcode to form cpm command */
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index f2b8adcc6c9..8692ff98fc0 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -72,6 +72,8 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
 
 /**************************************************************/
 
+#define HW_BUF_SPD_THRESHOLD    9600
+
 /*
  * Check, if transmit buffers are processed
 */
@@ -503,6 +505,11 @@ static void cpm_uart_set_termios(struct uart_port *port,
 	pr_debug("CPM uart[%d]:set_termios\n", port->line);
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+	if (baud <= HW_BUF_SPD_THRESHOLD ||
+	    (pinfo->port.state && pinfo->port.state->port.tty->low_latency))
+		pinfo->rx_fifosize = 1;
+	else
+		pinfo->rx_fifosize = RX_BUF_SIZE;
 
 	/* Character length programmed into the mode register is the
 	 * sum of: 1 start bit, number of data bits, 0 or 1 parity bit,
@@ -594,6 +601,17 @@ static void cpm_uart_set_termios(struct uart_port *port,
 	 */
 	bits++;
 	if (IS_SMC(pinfo)) {
+		/*
+		 * MRBLR can be changed while an SMC/SCC is operating only
+		 * if it is done in a single bus cycle with one 16-bit move
+		 * (not two 8-bit bus cycles back-to-back). This occurs when
+		 * the cp shifts control to the next RxBD, so the change does
+		 * not take effect immediately. To guarantee the exact RxBD
+		 * on which the change occurs, change MRBLR only while the
+		 * SMC/SCC receiver is disabled.
+		 */
+		out_be16(&pinfo->smcup->smc_mrblr, pinfo->rx_fifosize);
+
 		/* Set the mode register.  We want to keep a copy of the
 		 * enables, because we want to put them back if they were
 		 * present.
@@ -604,6 +622,7 @@ static void cpm_uart_set_termios(struct uart_port *port,
 		out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval |
 		    SMCMR_SM_UART | prev_mode);
 	} else {
+		out_be16(&pinfo->sccup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
 		out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
 	}
 
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index fa62578fcd2..bcc31f2140a 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -18,7 +18,6 @@ static char *serial_version = "$Revision: 1.25 $";
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/major.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
diff --git a/drivers/serial/ifx6x60.c b/drivers/serial/ifx6x60.c
new file mode 100644
index 00000000000..ab93763862d
--- /dev/null
+++ b/drivers/serial/ifx6x60.c
@@ -0,0 +1,1406 @@
+/****************************************************************************
+ *
+ * Driver for the IFX 6x60 spi modem.
+ *
+ * Copyright (C) 2008 Option International
+ * Copyright (C) 2008 Filip Aben <f.aben@option.com>
+ *		      Denis Joseph Barrow <d.barow@option.com>
+ *		      Jan Dumon <j.dumon@option.com>
+ *
+ * Copyright (C) 2009, 2010 Intel Corp
+ * Russ Gorby <richardx.r.gorby@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA
+ *
+ * Driver modified by Intel from Option gtm501l_spi.c
+ *
+ * Notes
+ * o	The driver currently assumes a single device only. If you need to
+ *	change this then look for saved_ifx_dev and add a device lookup
+ * o	The driver is intended to be big-endian safe but has never been
+ *	tested that way (no suitable hardware). There are a couple of FIXME
+ *	notes by areas that may need addressing
+ * o	Some of the GPIO naming/setup assumptions may need revisiting if
+ *	you need to use this driver for another platform.
+ *
+ *****************************************************************************/
+#include <linux/module.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/tty.h>
+#include <linux/kfifo.h>
+#include <linux/tty_flip.h>
+#include <linux/timer.h>
+#include <linux/serial.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/rfkill.h>
+#include <linux/fs.h>
+#include <linux/ip.h>
+#include <linux/dmapool.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/time.h>
+#include <linux/wait.h>
+#include <linux/tty.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/spi/ifx_modem.h>
+#include <linux/delay.h>
+
+#include "ifx6x60.h"
+
+#define IFX_SPI_MORE_MASK		0x10
+#define IFX_SPI_MORE_BIT		12	/* bit position in u16 */
+#define IFX_SPI_CTS_BIT			13	/* bit position in u16 */
+#define IFX_SPI_TTY_ID			0
+#define IFX_SPI_TIMEOUT_SEC		2
+#define IFX_SPI_HEADER_0		(-1)
+#define IFX_SPI_HEADER_F		(-2)
+
+/* forward reference */
+static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev);
+
+/* local variables */
+static int spi_b16 = 1;			/* 8 or 16 bit word length */
+static struct tty_driver *tty_drv;
+static struct ifx_spi_device *saved_ifx_dev;
+static struct lock_class_key ifx_spi_key;
+
+/* GPIO/GPE settings */
+
+/**
+ *	mrdy_set_high		-	set MRDY GPIO
+ *	@ifx: device we are controlling
+ *
+ */
+static inline void mrdy_set_high(struct ifx_spi_device *ifx)
+{
+	gpio_set_value(ifx->gpio.mrdy, 1);
+}
+
+/**
+ *	mrdy_set_low		-	clear MRDY GPIO
+ *	@ifx: device we are controlling
+ *
+ */
+static inline void mrdy_set_low(struct ifx_spi_device *ifx)
+{
+	gpio_set_value(ifx->gpio.mrdy, 0);
+}
+
+/**
+ *	ifx_spi_power_state_set
+ *	@ifx_dev: our SPI device
+ *	@val: bits to set
+ *
+ *	Set bit in power status and signal power system if status becomes non-0
+ */
+static void
+ifx_spi_power_state_set(struct ifx_spi_device *ifx_dev, unsigned char val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ifx_dev->power_lock, flags);
+
+	/*
+	 * if power status is already non-0, just update, else
+	 * tell power system
+	 */
+	if (!ifx_dev->power_status)
+		pm_runtime_get(&ifx_dev->spi_dev->dev);
+	ifx_dev->power_status |= val;
+
+	spin_unlock_irqrestore(&ifx_dev->power_lock, flags);
+}
+
+/**
+ *	ifx_spi_power_state_clear	-	clear power bit
+ *	@ifx_dev: our SPI device
+ *	@val: bits to clear
+ *
+ *	clear bit in power status and signal power system if status becomes 0
+ */
+static void
+ifx_spi_power_state_clear(struct ifx_spi_device *ifx_dev, unsigned char val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ifx_dev->power_lock, flags);
+
+	if (ifx_dev->power_status) {
+		ifx_dev->power_status &= ~val;
+		if (!ifx_dev->power_status)
+			pm_runtime_put(&ifx_dev->spi_dev->dev);
+	}
+
+	spin_unlock_irqrestore(&ifx_dev->power_lock, flags);
+}
+
+/**
+ *	swap_buf
+ *	@buf: our buffer
+ *	@len : number of bytes (not words) in the buffer
+ *	@end: end of buffer
+ *
+ *	Swap the contents of a buffer into big endian format
+ */
+static inline void swap_buf(u16 *buf, int len, void *end)
+{
+	int n;
+
+	len = ((len + 1) >> 1);
+	if ((void *)&buf[len] > end) {
+		pr_err("swap_buf: swap exceeds boundary (%p > %p)!",
+		       &buf[len], end);
+		return;
+	}
+	for (n = 0; n < len; n++) {
+		*buf = cpu_to_be16(*buf);
+		buf++;
+	}
+}
+
+/**
+ *	mrdy_assert		-	assert MRDY line
+ *	@ifx_dev: our SPI device
+ *
+ *	Assert mrdy and set timer to wait for SRDY interrupt, if SRDY is low
+ *	now.
+ *
+ *	FIXME: Can SRDY even go high as we are running this code ?
+ */
+static void mrdy_assert(struct ifx_spi_device *ifx_dev)
+{
+	int val = gpio_get_value(ifx_dev->gpio.srdy);
+	if (!val) {
+		if (!test_and_set_bit(IFX_SPI_STATE_TIMER_PENDING,
+				      &ifx_dev->flags)) {
+			ifx_dev->spi_timer.expires =
+				jiffies + IFX_SPI_TIMEOUT_SEC*HZ;
+			add_timer(&ifx_dev->spi_timer);
+
+		}
+	}
+	ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_DATA_PENDING);
+	mrdy_set_high(ifx_dev);
+}
+
+/**
+ *	ifx_spi_hangup		-	hang up an IFX device
+ *	@ifx_dev: our SPI device
+ *
+ *	Hang up the tty attached to the IFX device if one is currently
+ *	open. If not take no action
+ */
+static void ifx_spi_ttyhangup(struct ifx_spi_device *ifx_dev)
+{
+	struct tty_port *pport = &ifx_dev->tty_port;
+	struct tty_struct *tty = tty_port_tty_get(pport);
+	if (tty) {
+		tty_hangup(tty);
+		tty_kref_put(tty);
+	}
+}
+
+/**
+ *	ifx_spi_timeout		-	SPI timeout
+ *	@arg: our SPI device
+ *
+ *	The SPI has timed out: hang up the tty. Users will then see a hangup
+ *	and error events.
+ */
+static void ifx_spi_timeout(unsigned long arg)
+{
+	struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *)arg;
+
+	dev_warn(&ifx_dev->spi_dev->dev, "*** SPI Timeout ***");
+	ifx_spi_ttyhangup(ifx_dev);
+	mrdy_set_low(ifx_dev);
+	clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
+}
+
+/* char/tty operations */
+
+/**
+ *	ifx_spi_tiocmget	-	get modem lines
+ *	@tty: our tty device
+ *	@filp: file handle issuing the request
+ *
+ *	Map the signal state into Linux modem flags and report the value
+ *	in Linux terms
+ */
+static int ifx_spi_tiocmget(struct tty_struct *tty, struct file *filp)
+{
+	unsigned int value;
+	struct ifx_spi_device *ifx_dev = tty->driver_data;
+
+	value =
+	(test_bit(IFX_SPI_RTS, &ifx_dev->signal_state) ? TIOCM_RTS : 0) |
+	(test_bit(IFX_SPI_DTR, &ifx_dev->signal_state) ? TIOCM_DTR : 0) |
+	(test_bit(IFX_SPI_CTS, &ifx_dev->signal_state) ? TIOCM_CTS : 0) |
+	(test_bit(IFX_SPI_DSR, &ifx_dev->signal_state) ? TIOCM_DSR : 0) |
+	(test_bit(IFX_SPI_DCD, &ifx_dev->signal_state) ? TIOCM_CAR : 0) |
+	(test_bit(IFX_SPI_RI, &ifx_dev->signal_state) ? TIOCM_RNG : 0);
+	return value;
+}
+
+/**
+ *	ifx_spi_tiocmset	-	set modem bits
+ *	@tty: the tty structure
+ *	@filp: file handle issuing the request
+ *	@set: bits to set
+ *	@clear: bits to clear
+ *
+ *	The IFX6x60 only supports DTR and RTS. Set them accordingly
+ *	and flag that an update to the modem is needed.
+ *
+ *	FIXME: do we need to kick the tranfers when we do this ?
+ */
+static int ifx_spi_tiocmset(struct tty_struct *tty, struct file *filp,
+			    unsigned int set, unsigned int clear)
+{
+	struct ifx_spi_device *ifx_dev = tty->driver_data;
+
+	if (set & TIOCM_RTS)
+		set_bit(IFX_SPI_RTS, &ifx_dev->signal_state);
+	if (set & TIOCM_DTR)
+		set_bit(IFX_SPI_DTR, &ifx_dev->signal_state);
+	if (clear & TIOCM_RTS)
+		clear_bit(IFX_SPI_RTS, &ifx_dev->signal_state);
+	if (clear & TIOCM_DTR)
+		clear_bit(IFX_SPI_DTR, &ifx_dev->signal_state);
+
+	set_bit(IFX_SPI_UPDATE, &ifx_dev->signal_state);
+	return 0;
+}
+
+/**
+ *	ifx_spi_open	-	called on tty open
+ *	@tty: our tty device
+ *	@filp: file handle being associated with the tty
+ *
+ *	Open the tty interface. We let the tty_port layer do all the work
+ *	for us.
+ *
+ *	FIXME: Remove single device assumption and saved_ifx_dev
+ */
+static int ifx_spi_open(struct tty_struct *tty, struct file *filp)
+{
+	return tty_port_open(&saved_ifx_dev->tty_port, tty, filp);
+}
+
+/**
+ *	ifx_spi_close	-	called when our tty closes
+ *	@tty: the tty being closed
+ *	@filp: the file handle being closed
+ *
+ *	Perform the close of the tty. We use the tty_port layer to do all
+ *	our hard work.
+ */
+static void ifx_spi_close(struct tty_struct *tty, struct file *filp)
+{
+	struct ifx_spi_device *ifx_dev = tty->driver_data;
+	tty_port_close(&ifx_dev->tty_port, tty, filp);
+	/* FIXME: should we do an ifx_spi_reset here ? */
+}
+
+/**
+ *	ifx_decode_spi_header	-	decode received header
+ *	@buffer: the received data
+ *	@length: decoded length
+ *	@more: decoded more flag
+ *	@received_cts: status of cts we received
+ *
+ *	Note how received_cts is handled -- if header is all F it is left
+ *	the same as it was, if header is all 0 it is set to 0 otherwise it is
+ *	taken from the incoming header.
+ *
+ *	FIXME: endianness
+ */
+static int ifx_spi_decode_spi_header(unsigned char *buffer, int *length,
+			unsigned char *more, unsigned char *received_cts)
+{
+	u16 h1;
+	u16 h2;
+	u16 *in_buffer = (u16 *)buffer;
+
+	h1 = *in_buffer;
+	h2 = *(in_buffer+1);
+
+	if (h1 == 0 && h2 == 0) {
+		*received_cts = 0;
+		return IFX_SPI_HEADER_0;
+	} else if (h1 == 0xffff && h2 == 0xffff) {
+		/* spi_slave_cts remains as it was */
+		return IFX_SPI_HEADER_F;
+	}
+
+	*length = h1 & 0xfff;	/* upper bits of byte are flags */
+	*more = (buffer[1] >> IFX_SPI_MORE_BIT) & 1;
+	*received_cts = (buffer[3] >> IFX_SPI_CTS_BIT) & 1;
+	return 0;
+}
+
+/**
+ *	ifx_setup_spi_header	-	set header fields
+ *	@txbuffer: pointer to start of SPI buffer
+ *	@tx_count: bytes
+ *	@more: indicate if more to follow
+ *
+ *	Format up an SPI header for a transfer
+ *
+ *	FIXME: endianness?
+ */
+static void ifx_spi_setup_spi_header(unsigned char *txbuffer, int tx_count,
+					unsigned char more)
+{
+	*(u16 *)(txbuffer) = tx_count;
+	*(u16 *)(txbuffer+2) = IFX_SPI_PAYLOAD_SIZE;
+	txbuffer[1] |= (more << IFX_SPI_MORE_BIT) & IFX_SPI_MORE_MASK;
+}
+
+/**
+ *	ifx_spi_wakeup_serial	-	SPI space made
+ *	@port_data: our SPI device
+ *
+ *	We have emptied the FIFO enough that we want to get more data
+ *	queued into it. Poke the line discipline via tty_wakeup so that
+ *	it will feed us more bits
+ */
+static void ifx_spi_wakeup_serial(struct ifx_spi_device *ifx_dev)
+{
+	struct tty_struct *tty;
+
+	tty = tty_port_tty_get(&ifx_dev->tty_port);
+	if (!tty)
+		return;
+	tty_wakeup(tty);
+	tty_kref_put(tty);
+}
+
+/**
+ *	ifx_spi_prepare_tx_buffer	-	prepare transmit frame
+ *	@ifx_dev: our SPI device
+ *
+ *	The transmit buffr needs a header and various other bits of
+ *	information followed by as much data as we can pull from the FIFO
+ *	and transfer. This function formats up a suitable buffer in the
+ *	ifx_dev->tx_buffer
+ *
+ *	FIXME: performance - should we wake the tty when the queue is half
+ *			     empty ?
+ */
+static int ifx_spi_prepare_tx_buffer(struct ifx_spi_device *ifx_dev)
+{
+	int temp_count;
+	int queue_length;
+	int tx_count;
+	unsigned char *tx_buffer;
+
+	tx_buffer = ifx_dev->tx_buffer;
+	memset(tx_buffer, 0, IFX_SPI_TRANSFER_SIZE);
+
+	/* make room for required SPI header */
+	tx_buffer += IFX_SPI_HEADER_OVERHEAD;
+	tx_count = IFX_SPI_HEADER_OVERHEAD;
+
+	/* clear to signal no more data if this turns out to be the
+	 * last buffer sent in a sequence */
+	ifx_dev->spi_more = 0;
+
+	/* if modem cts is set, just send empty buffer */
+	if (!ifx_dev->spi_slave_cts) {
+		/* see if there's tx data */
+		queue_length = kfifo_len(&ifx_dev->tx_fifo);
+		if (queue_length != 0) {
+			/* data to mux -- see if there's room for it */
+			temp_count = min(queue_length, IFX_SPI_PAYLOAD_SIZE);
+			temp_count = kfifo_out_locked(&ifx_dev->tx_fifo,
+					tx_buffer, temp_count,
+					&ifx_dev->fifo_lock);
+
+			/* update buffer pointer and data count in message */
+			tx_buffer += temp_count;
+			tx_count += temp_count;
+			if (temp_count == queue_length)
+				/* poke port to get more data */
+				ifx_spi_wakeup_serial(ifx_dev);
+			else /* more data in port, use next SPI message */
+				ifx_dev->spi_more = 1;
+		}
+	}
+	/* have data and info for header -- set up SPI header in buffer */
+	/* spi header needs payload size, not entire buffer size */
+	ifx_spi_setup_spi_header(ifx_dev->tx_buffer,
+					tx_count-IFX_SPI_HEADER_OVERHEAD,
+					ifx_dev->spi_more);
+	/* swap actual data in the buffer */
+	swap_buf((u16 *)(ifx_dev->tx_buffer), tx_count,
+		&ifx_dev->tx_buffer[IFX_SPI_TRANSFER_SIZE]);
+	return tx_count;
+}
+
+/**
+ *	ifx_spi_write		-	line discipline write
+ *	@tty: our tty device
+ *	@buf: pointer to buffer to write (kernel space)
+ *	@count: size of buffer
+ *
+ *	Write the characters we have been given into the FIFO. If the device
+ *	is not active then activate it, when the SRDY line is asserted back
+ *	this will commence I/O
+ */
+static int ifx_spi_write(struct tty_struct *tty, const unsigned char *buf,
+			 int count)
+{
+	struct ifx_spi_device *ifx_dev = tty->driver_data;
+	unsigned char *tmp_buf = (unsigned char *)buf;
+	int tx_count = kfifo_in_locked(&ifx_dev->tx_fifo, tmp_buf, count,
+				   &ifx_dev->fifo_lock);
+	mrdy_assert(ifx_dev);
+	return tx_count;
+}
+
+/**
+ *	ifx_spi_chars_in_buffer	-	line discipline helper
+ *	@tty: our tty device
+ *
+ *	Report how much data we can accept before we drop bytes. As we use
+ *	a simple FIFO this is nice and easy.
+ */
+static int ifx_spi_write_room(struct tty_struct *tty)
+{
+	struct ifx_spi_device *ifx_dev = tty->driver_data;
+	return IFX_SPI_FIFO_SIZE - kfifo_len(&ifx_dev->tx_fifo);
+}
+
+/**
+ *	ifx_spi_chars_in_buffer	-	line discipline helper
+ *	@tty: our tty device
+ *
+ *	Report how many characters we have buffered. In our case this is the
+ *	number of bytes sitting in our transmit FIFO.
+ */
+static int ifx_spi_chars_in_buffer(struct tty_struct *tty)
+{
+	struct ifx_spi_device *ifx_dev = tty->driver_data;
+	return kfifo_len(&ifx_dev->tx_fifo);
+}
+
+/**
+ *	ifx_port_hangup
+ *	@port: our tty port
+ *
+ *	tty port hang up. Called when tty_hangup processing is invoked either
+ *	by loss of carrier, or by software (eg vhangup). Serialized against
+ *	activate/shutdown by the tty layer.
+ */
+static void ifx_spi_hangup(struct tty_struct *tty)
+{
+	struct ifx_spi_device *ifx_dev = tty->driver_data;
+	tty_port_hangup(&ifx_dev->tty_port);
+}
+
+/**
+ *	ifx_port_activate
+ *	@port: our tty port
+ *
+ *	tty port activate method - called for first open. Serialized
+ *	with hangup and shutdown by the tty layer.
+ */
+static int ifx_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+	struct ifx_spi_device *ifx_dev =
+		container_of(port, struct ifx_spi_device, tty_port);
+
+	/* clear any old data; can't do this in 'close' */
+	kfifo_reset(&ifx_dev->tx_fifo);
+
+	/* put port data into this tty */
+	tty->driver_data = ifx_dev;
+
+	/* allows flip string push from int context */
+	tty->low_latency = 1;
+
+	return 0;
+}
+
+/**
+ *	ifx_port_shutdown
+ *	@port: our tty port
+ *
+ *	tty port shutdown method - called for last port close. Serialized
+ *	with hangup and activate by the tty layer.
+ */
+static void ifx_port_shutdown(struct tty_port *port)
+{
+	struct ifx_spi_device *ifx_dev =
+		container_of(port, struct ifx_spi_device, tty_port);
+
+	mrdy_set_low(ifx_dev);
+	clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
+	tasklet_kill(&ifx_dev->io_work_tasklet);
+}
+
+static const struct tty_port_operations ifx_tty_port_ops = {
+	.activate = ifx_port_activate,
+	.shutdown = ifx_port_shutdown,
+};
+
+static const struct tty_operations ifx_spi_serial_ops = {
+	.open = ifx_spi_open,
+	.close = ifx_spi_close,
+	.write = ifx_spi_write,
+	.hangup = ifx_spi_hangup,
+	.write_room = ifx_spi_write_room,
+	.chars_in_buffer = ifx_spi_chars_in_buffer,
+	.tiocmget = ifx_spi_tiocmget,
+	.tiocmset = ifx_spi_tiocmset,
+};
+
+/**
+ *	ifx_spi_insert_fip_string	-	queue received data
+ *	@ifx_ser: our SPI device
+ *	@chars: buffer we have received
+ *	@size: number of chars reeived
+ *
+ *	Queue bytes to the tty assuming the tty side is currently open. If
+ *	not the discard the data.
+ */
+static void ifx_spi_insert_flip_string(struct ifx_spi_device *ifx_dev,
+				    unsigned char *chars, size_t size)
+{
+	struct tty_struct *tty = tty_port_tty_get(&ifx_dev->tty_port);
+	if (!tty)
+		return;
+	tty_insert_flip_string(tty, chars, size);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
+
+/**
+ *	ifx_spi_complete	-	SPI transfer completed
+ *	@ctx: our SPI device
+ *
+ *	An SPI transfer has completed. Process any received data and kick off
+ *	any further transmits we can commence.
+ */
+static void ifx_spi_complete(void *ctx)
+{
+	struct ifx_spi_device *ifx_dev = ctx;
+	struct tty_struct *tty;
+	struct tty_ldisc *ldisc = NULL;
+	int length;
+	int actual_length;
+	unsigned char more;
+	unsigned char cts;
+	int local_write_pending = 0;
+	int queue_length;
+	int srdy;
+	int decode_result;
+
+	mrdy_set_low(ifx_dev);
+
+	if (!ifx_dev->spi_msg.status) {
+		/* check header validity, get comm flags */
+		swap_buf((u16 *)ifx_dev->rx_buffer, IFX_SPI_HEADER_OVERHEAD,
+			&ifx_dev->rx_buffer[IFX_SPI_HEADER_OVERHEAD]);
+		decode_result = ifx_spi_decode_spi_header(ifx_dev->rx_buffer,
+				&length, &more, &cts);
+		if (decode_result == IFX_SPI_HEADER_0) {
+			dev_dbg(&ifx_dev->spi_dev->dev,
+				"ignore input: invalid header 0");
+			ifx_dev->spi_slave_cts = 0;
+			goto complete_exit;
+		} else if (decode_result == IFX_SPI_HEADER_F) {
+			dev_dbg(&ifx_dev->spi_dev->dev,
+				"ignore input: invalid header F");
+			goto complete_exit;
+		}
+
+		ifx_dev->spi_slave_cts = cts;
+
+		actual_length = min((unsigned int)length,
+					ifx_dev->spi_msg.actual_length);
+		swap_buf((u16 *)(ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD),
+			 actual_length,
+			 &ifx_dev->rx_buffer[IFX_SPI_TRANSFER_SIZE]);
+		ifx_spi_insert_flip_string(
+			ifx_dev,
+			ifx_dev->rx_buffer + IFX_SPI_HEADER_OVERHEAD,
+			(size_t)actual_length);
+	} else {
+		dev_dbg(&ifx_dev->spi_dev->dev, "SPI transfer error %d",
+		       ifx_dev->spi_msg.status);
+	}
+
+complete_exit:
+	if (ifx_dev->write_pending) {
+		ifx_dev->write_pending = 0;
+		local_write_pending = 1;
+	}
+
+	clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &(ifx_dev->flags));
+
+	queue_length = kfifo_len(&ifx_dev->tx_fifo);
+	srdy = gpio_get_value(ifx_dev->gpio.srdy);
+	if (!srdy)
+		ifx_spi_power_state_clear(ifx_dev, IFX_SPI_POWER_SRDY);
+
+	/* schedule output if there is more to do */
+	if (test_and_clear_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags))
+		tasklet_schedule(&ifx_dev->io_work_tasklet);
+	else {
+		if (more || ifx_dev->spi_more || queue_length > 0 ||
+			local_write_pending) {
+			if (ifx_dev->spi_slave_cts) {
+				if (more)
+					mrdy_assert(ifx_dev);
+			} else
+				mrdy_assert(ifx_dev);
+		} else {
+			/*
+			 * poke line discipline driver if any for more data
+			 * may or may not get more data to write
+			 * for now, say not busy
+			 */
+			ifx_spi_power_state_clear(ifx_dev,
+						  IFX_SPI_POWER_DATA_PENDING);
+			tty = tty_port_tty_get(&ifx_dev->tty_port);
+			if (tty) {
+				ldisc = tty_ldisc_ref(tty);
+				if (ldisc) {
+					ldisc->ops->write_wakeup(tty);
+					tty_ldisc_deref(ldisc);
+				}
+				tty_kref_put(tty);
+			}
+		}
+	}
+}
+
+/**
+ *	ifx_spio_io		-	I/O tasklet
+ *	@data: our SPI device
+ *
+ *	Queue data for transmission if possible and then kick off the
+ *	transfer.
+ */
+static void ifx_spi_io(unsigned long data)
+{
+	int retval;
+	struct ifx_spi_device *ifx_dev = (struct ifx_spi_device *) data;
+
+	if (!test_and_set_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags)) {
+		if (ifx_dev->gpio.unack_srdy_int_nb > 0)
+			ifx_dev->gpio.unack_srdy_int_nb--;
+
+		ifx_spi_prepare_tx_buffer(ifx_dev);
+
+		spi_message_init(&ifx_dev->spi_msg);
+		INIT_LIST_HEAD(&ifx_dev->spi_msg.queue);
+
+		ifx_dev->spi_msg.context = ifx_dev;
+		ifx_dev->spi_msg.complete = ifx_spi_complete;
+
+		/* set up our spi transfer */
+		/* note len is BYTES, not transfers */
+		ifx_dev->spi_xfer.len = IFX_SPI_TRANSFER_SIZE;
+		ifx_dev->spi_xfer.cs_change = 0;
+		ifx_dev->spi_xfer.speed_hz = 12500000;
+		/* ifx_dev->spi_xfer.speed_hz = 390625; */
+		ifx_dev->spi_xfer.bits_per_word = spi_b16 ? 16 : 8;
+
+		ifx_dev->spi_xfer.tx_buf = ifx_dev->tx_buffer;
+		ifx_dev->spi_xfer.rx_buf = ifx_dev->rx_buffer;
+
+		/*
+		 * setup dma pointers
+		 */
+		if (ifx_dev->is_6160) {
+			ifx_dev->spi_msg.is_dma_mapped = 1;
+			ifx_dev->tx_dma = ifx_dev->tx_bus;
+			ifx_dev->rx_dma = ifx_dev->rx_bus;
+			ifx_dev->spi_xfer.tx_dma = ifx_dev->tx_dma;
+			ifx_dev->spi_xfer.rx_dma = ifx_dev->rx_dma;
+		} else {
+			ifx_dev->spi_msg.is_dma_mapped = 0;
+			ifx_dev->tx_dma = (dma_addr_t)0;
+			ifx_dev->rx_dma = (dma_addr_t)0;
+			ifx_dev->spi_xfer.tx_dma = (dma_addr_t)0;
+			ifx_dev->spi_xfer.rx_dma = (dma_addr_t)0;
+		}
+
+		spi_message_add_tail(&ifx_dev->spi_xfer, &ifx_dev->spi_msg);
+
+		/* Assert MRDY. This may have already been done by the write
+		 * routine.
+		 */
+		mrdy_assert(ifx_dev);
+
+		retval = spi_async(ifx_dev->spi_dev, &ifx_dev->spi_msg);
+		if (retval) {
+			clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS,
+				  &ifx_dev->flags);
+			tasklet_schedule(&ifx_dev->io_work_tasklet);
+			return;
+		}
+	} else
+		ifx_dev->write_pending = 1;
+}
+
+/**
+ *	ifx_spi_free_port	-	free up the tty side
+ *	@ifx_dev: IFX device going away
+ *
+ *	Unregister and free up a port when the device goes away
+ */
+static void ifx_spi_free_port(struct ifx_spi_device *ifx_dev)
+{
+	if (ifx_dev->tty_dev)
+		tty_unregister_device(tty_drv, ifx_dev->minor);
+	kfifo_free(&ifx_dev->tx_fifo);
+}
+
+/**
+ *	ifx_spi_create_port	-	create a new port
+ *	@ifx_dev: our spi device
+ *
+ *	Allocate and initialise the tty port that goes with this interface
+ *	and add it to the tty layer so that it can be opened.
+ */
+static int ifx_spi_create_port(struct ifx_spi_device *ifx_dev)
+{
+	int ret = 0;
+	struct tty_port *pport = &ifx_dev->tty_port;
+
+	spin_lock_init(&ifx_dev->fifo_lock);
+	lockdep_set_class_and_subclass(&ifx_dev->fifo_lock,
+		&ifx_spi_key, 0);
+
+	if (kfifo_alloc(&ifx_dev->tx_fifo, IFX_SPI_FIFO_SIZE, GFP_KERNEL)) {
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	pport->ops = &ifx_tty_port_ops;
+	tty_port_init(pport);
+	ifx_dev->minor = IFX_SPI_TTY_ID;
+	ifx_dev->tty_dev = tty_register_device(tty_drv, ifx_dev->minor,
+					       &ifx_dev->spi_dev->dev);
+	if (IS_ERR(ifx_dev->tty_dev)) {
+		dev_dbg(&ifx_dev->spi_dev->dev,
+			"%s: registering tty device failed", __func__);
+		ret = PTR_ERR(ifx_dev->tty_dev);
+		goto error_ret;
+	}
+	return 0;
+
+error_ret:
+	ifx_spi_free_port(ifx_dev);
+	return ret;
+}
+
+/**
+ *	ifx_spi_handle_srdy		-	handle SRDY
+ *	@ifx_dev: device asserting SRDY
+ *
+ *	Check our device state and see what we need to kick off when SRDY
+ *	is asserted. This usually means killing the timer and firing off the
+ *	I/O processing.
+ */
+static void ifx_spi_handle_srdy(struct ifx_spi_device *ifx_dev)
+{
+	if (test_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags)) {
+		del_timer_sync(&ifx_dev->spi_timer);
+		clear_bit(IFX_SPI_STATE_TIMER_PENDING, &ifx_dev->flags);
+	}
+
+	ifx_spi_power_state_set(ifx_dev, IFX_SPI_POWER_SRDY);
+
+	if (!test_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags))
+		tasklet_schedule(&ifx_dev->io_work_tasklet);
+	else
+		set_bit(IFX_SPI_STATE_IO_READY, &ifx_dev->flags);
+}
+
+/**
+ *	ifx_spi_srdy_interrupt	-	SRDY asserted
+ *	@irq: our IRQ number
+ *	@dev: our ifx device
+ *
+ *	The modem asserted SRDY. Handle the srdy event
+ */
+static irqreturn_t ifx_spi_srdy_interrupt(int irq, void *dev)
+{
+	struct ifx_spi_device *ifx_dev = dev;
+	ifx_dev->gpio.unack_srdy_int_nb++;
+	ifx_spi_handle_srdy(ifx_dev);
+	return IRQ_HANDLED;
+}
+
+/**
+ *	ifx_spi_reset_interrupt	-	Modem has changed reset state
+ *	@irq: interrupt number
+ *	@dev: our device pointer
+ *
+ *	The modem has either entered or left reset state. Check the GPIO
+ *	line to see which.
+ *
+ *	FIXME: review locking on MR_INPROGRESS versus
+ *	parallel unsolicited reset/solicited reset
+ */
+static irqreturn_t ifx_spi_reset_interrupt(int irq, void *dev)
+{
+	struct ifx_spi_device *ifx_dev = dev;
+	int val = gpio_get_value(ifx_dev->gpio.reset_out);
+	int solreset = test_bit(MR_START, &ifx_dev->mdm_reset_state);
+
+	if (val == 0) {
+		/* entered reset */
+		set_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state);
+		if (!solreset) {
+			/* unsolicited reset  */
+			ifx_spi_ttyhangup(ifx_dev);
+		}
+	} else {
+		/* exited reset */
+		clear_bit(MR_INPROGRESS, &ifx_dev->mdm_reset_state);
+		if (solreset) {
+			set_bit(MR_COMPLETE, &ifx_dev->mdm_reset_state);
+			wake_up(&ifx_dev->mdm_reset_wait);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+/**
+ *	ifx_spi_free_device - free device
+ *	@ifx_dev: device to free
+ *
+ *	Free the IFX device
+ */
+static void ifx_spi_free_device(struct ifx_spi_device *ifx_dev)
+{
+	ifx_spi_free_port(ifx_dev);
+	dma_free_coherent(&ifx_dev->spi_dev->dev,
+				IFX_SPI_TRANSFER_SIZE,
+				ifx_dev->tx_buffer,
+				ifx_dev->tx_bus);
+	dma_free_coherent(&ifx_dev->spi_dev->dev,
+				IFX_SPI_TRANSFER_SIZE,
+				ifx_dev->rx_buffer,
+				ifx_dev->rx_bus);
+}
+
+/**
+ *	ifx_spi_reset	-	reset modem
+ *	@ifx_dev: modem to reset
+ *
+ *	Perform a reset on the modem
+ */
+static int ifx_spi_reset(struct ifx_spi_device *ifx_dev)
+{
+	int ret;
+	/*
+	 * set up modem power, reset
+	 *
+	 * delays are required on some platforms for the modem
+	 * to reset properly
+	 */
+	set_bit(MR_START, &ifx_dev->mdm_reset_state);
+	gpio_set_value(ifx_dev->gpio.po, 0);
+	gpio_set_value(ifx_dev->gpio.reset, 0);
+	msleep(25);
+	gpio_set_value(ifx_dev->gpio.reset, 1);
+	msleep(1);
+	gpio_set_value(ifx_dev->gpio.po, 1);
+	msleep(1);
+	gpio_set_value(ifx_dev->gpio.po, 0);
+	ret = wait_event_timeout(ifx_dev->mdm_reset_wait,
+				 test_bit(MR_COMPLETE,
+					  &ifx_dev->mdm_reset_state),
+				 IFX_RESET_TIMEOUT);
+	if (!ret)
+		dev_warn(&ifx_dev->spi_dev->dev, "Modem reset timeout: (state:%lx)",
+			 ifx_dev->mdm_reset_state);
+
+	ifx_dev->mdm_reset_state = 0;
+	return ret;
+}
+
+/**
+ *	ifx_spi_spi_probe	-	probe callback
+ *	@spi: our possible matching SPI device
+ *
+ *	Probe for a 6x60 modem on SPI bus. Perform any needed device and
+ *	GPIO setup.
+ *
+ *	FIXME:
+ *	-	Support for multiple devices
+ *	-	Split out MID specific GPIO handling eventually
+ */
+
+static int ifx_spi_spi_probe(struct spi_device *spi)
+{
+	int ret;
+	int srdy;
+	struct ifx_modem_platform_data *pl_data = NULL;
+	struct ifx_spi_device *ifx_dev;
+
+	if (saved_ifx_dev) {
+		dev_dbg(&spi->dev, "ignoring subsequent detection");
+		return -ENODEV;
+	}
+
+	/* initialize structure to hold our device variables */
+	ifx_dev = kzalloc(sizeof(struct ifx_spi_device), GFP_KERNEL);
+	if (!ifx_dev) {
+		dev_err(&spi->dev, "spi device allocation failed");
+		return -ENOMEM;
+	}
+	saved_ifx_dev = ifx_dev;
+	ifx_dev->spi_dev = spi;
+	clear_bit(IFX_SPI_STATE_IO_IN_PROGRESS, &ifx_dev->flags);
+	spin_lock_init(&ifx_dev->write_lock);
+	spin_lock_init(&ifx_dev->power_lock);
+	ifx_dev->power_status = 0;
+	init_timer(&ifx_dev->spi_timer);
+	ifx_dev->spi_timer.function = ifx_spi_timeout;
+	ifx_dev->spi_timer.data = (unsigned long)ifx_dev;
+	ifx_dev->is_6160 = pl_data->is_6160;
+
+	/* ensure SPI protocol flags are initialized to enable transfer */
+	ifx_dev->spi_more = 0;
+	ifx_dev->spi_slave_cts = 0;
+
+	/*initialize transfer and dma buffers */
+	ifx_dev->tx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+				IFX_SPI_TRANSFER_SIZE,
+				&ifx_dev->tx_bus,
+				GFP_KERNEL);
+	if (!ifx_dev->tx_buffer) {
+		dev_err(&spi->dev, "DMA-TX buffer allocation failed");
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	ifx_dev->rx_buffer = dma_alloc_coherent(&ifx_dev->spi_dev->dev,
+				IFX_SPI_TRANSFER_SIZE,
+				&ifx_dev->rx_bus,
+				GFP_KERNEL);
+	if (!ifx_dev->rx_buffer) {
+		dev_err(&spi->dev, "DMA-RX buffer allocation failed");
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	/* initialize waitq for modem reset */
+	init_waitqueue_head(&ifx_dev->mdm_reset_wait);
+
+	spi_set_drvdata(spi, ifx_dev);
+	tasklet_init(&ifx_dev->io_work_tasklet, ifx_spi_io,
+						(unsigned long)ifx_dev);
+
+	set_bit(IFX_SPI_STATE_PRESENT, &ifx_dev->flags);
+
+	/* create our tty port */
+	ret = ifx_spi_create_port(ifx_dev);
+	if (ret != 0) {
+		dev_err(&spi->dev, "create default tty port failed");
+		goto error_ret;
+	}
+
+	pl_data = (struct ifx_modem_platform_data *)spi->dev.platform_data;
+	if (pl_data) {
+		ifx_dev->gpio.reset = pl_data->rst_pmu;
+		ifx_dev->gpio.po = pl_data->pwr_on;
+		ifx_dev->gpio.mrdy = pl_data->mrdy;
+		ifx_dev->gpio.srdy = pl_data->srdy;
+		ifx_dev->gpio.reset_out = pl_data->rst_out;
+	} else {
+		dev_err(&spi->dev, "missing platform data!");
+		ret = -ENODEV;
+		goto error_ret;
+	}
+
+	dev_info(&spi->dev, "gpios %d, %d, %d, %d, %d",
+		 ifx_dev->gpio.reset, ifx_dev->gpio.po, ifx_dev->gpio.mrdy,
+		 ifx_dev->gpio.srdy, ifx_dev->gpio.reset_out);
+
+	/* Configure gpios */
+	ret = gpio_request(ifx_dev->gpio.reset, "ifxModem");
+	if (ret < 0) {
+		dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET)",
+			ifx_dev->gpio.reset);
+		goto error_ret;
+	}
+	ret += gpio_direction_output(ifx_dev->gpio.reset, 0);
+	ret += gpio_export(ifx_dev->gpio.reset, 1);
+	if (ret) {
+		dev_err(&spi->dev, "Unable to configure GPIO%d (RESET)",
+			ifx_dev->gpio.reset);
+		ret = -EBUSY;
+		goto error_ret2;
+	}
+
+	ret = gpio_request(ifx_dev->gpio.po, "ifxModem");
+	ret += gpio_direction_output(ifx_dev->gpio.po, 0);
+	ret += gpio_export(ifx_dev->gpio.po, 1);
+	if (ret) {
+		dev_err(&spi->dev, "Unable to configure GPIO%d (ON)",
+			ifx_dev->gpio.po);
+		ret = -EBUSY;
+		goto error_ret3;
+	}
+
+	ret = gpio_request(ifx_dev->gpio.mrdy, "ifxModem");
+	if (ret < 0) {
+		dev_err(&spi->dev, "Unable to allocate GPIO%d (MRDY)",
+			ifx_dev->gpio.mrdy);
+		goto error_ret3;
+	}
+	ret += gpio_export(ifx_dev->gpio.mrdy, 1);
+	ret += gpio_direction_output(ifx_dev->gpio.mrdy, 0);
+	if (ret) {
+		dev_err(&spi->dev, "Unable to configure GPIO%d (MRDY)",
+			ifx_dev->gpio.mrdy);
+		ret = -EBUSY;
+		goto error_ret4;
+	}
+
+	ret = gpio_request(ifx_dev->gpio.srdy, "ifxModem");
+	if (ret < 0) {
+		dev_err(&spi->dev, "Unable to allocate GPIO%d (SRDY)",
+			ifx_dev->gpio.srdy);
+		ret = -EBUSY;
+		goto error_ret4;
+	}
+	ret += gpio_export(ifx_dev->gpio.srdy, 1);
+	ret += gpio_direction_input(ifx_dev->gpio.srdy);
+	if (ret) {
+		dev_err(&spi->dev, "Unable to configure GPIO%d (SRDY)",
+			ifx_dev->gpio.srdy);
+		ret = -EBUSY;
+		goto error_ret5;
+	}
+
+	ret = gpio_request(ifx_dev->gpio.reset_out, "ifxModem");
+	if (ret < 0) {
+		dev_err(&spi->dev, "Unable to allocate GPIO%d (RESET_OUT)",
+			ifx_dev->gpio.reset_out);
+		goto error_ret5;
+	}
+	ret += gpio_export(ifx_dev->gpio.reset_out, 1);
+	ret += gpio_direction_input(ifx_dev->gpio.reset_out);
+	if (ret) {
+		dev_err(&spi->dev, "Unable to configure GPIO%d (RESET_OUT)",
+			ifx_dev->gpio.reset_out);
+		ret = -EBUSY;
+		goto error_ret6;
+	}
+
+	ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out),
+			  ifx_spi_reset_interrupt,
+			  IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME,
+		(void *)ifx_dev);
+	if (ret) {
+		dev_err(&spi->dev, "Unable to get irq %x\n",
+			gpio_to_irq(ifx_dev->gpio.reset_out));
+		goto error_ret6;
+	}
+
+	ret = ifx_spi_reset(ifx_dev);
+
+	ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy),
+			  ifx_spi_srdy_interrupt,
+			  IRQF_TRIGGER_RISING, DRVNAME,
+			  (void *)ifx_dev);
+	if (ret) {
+		dev_err(&spi->dev, "Unable to get irq %x",
+			gpio_to_irq(ifx_dev->gpio.srdy));
+		goto error_ret7;
+	}
+
+	/* set pm runtime power state and register with power system */
+	pm_runtime_set_active(&spi->dev);
+	pm_runtime_enable(&spi->dev);
+
+	/* handle case that modem is already signaling SRDY */
+	/* no outgoing tty open at this point, this just satisfies the
+	 * modem's read and should reset communication properly
+	 */
+	srdy = gpio_get_value(ifx_dev->gpio.srdy);
+
+	if (srdy) {
+		mrdy_assert(ifx_dev);
+		ifx_spi_handle_srdy(ifx_dev);
+	} else
+		mrdy_set_low(ifx_dev);
+	return 0;
+
+error_ret7:
+	free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev);
+error_ret6:
+	gpio_free(ifx_dev->gpio.srdy);
+error_ret5:
+	gpio_free(ifx_dev->gpio.mrdy);
+error_ret4:
+	gpio_free(ifx_dev->gpio.reset);
+error_ret3:
+	gpio_free(ifx_dev->gpio.po);
+error_ret2:
+	gpio_free(ifx_dev->gpio.reset_out);
+error_ret:
+	ifx_spi_free_device(ifx_dev);
+	saved_ifx_dev = NULL;
+	return ret;
+}
+
+/**
+ *	ifx_spi_spi_remove	-	SPI device was removed
+ *	@spi: SPI device
+ *
+ *	FIXME: We should be shutting the device down here not in
+ *	the module unload path.
+ */
+
+static int ifx_spi_spi_remove(struct spi_device *spi)
+{
+	struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi);
+	/* stop activity */
+	tasklet_kill(&ifx_dev->io_work_tasklet);
+	/* free irq */
+	free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev);
+	free_irq(gpio_to_irq(ifx_dev->gpio.srdy), (void *)ifx_dev);
+
+	gpio_free(ifx_dev->gpio.srdy);
+	gpio_free(ifx_dev->gpio.mrdy);
+	gpio_free(ifx_dev->gpio.reset);
+	gpio_free(ifx_dev->gpio.po);
+	gpio_free(ifx_dev->gpio.reset_out);
+
+	/* free allocations */
+	ifx_spi_free_device(ifx_dev);
+
+	saved_ifx_dev = NULL;
+	return 0;
+}
+
+/**
+ *	ifx_spi_spi_shutdown	-	called on SPI shutdown
+ *	@spi: SPI device
+ *
+ *	No action needs to be taken here
+ */
+
+static void ifx_spi_spi_shutdown(struct spi_device *spi)
+{
+}
+
+/*
+ * various suspends and resumes have nothing to do
+ * no hardware to save state for
+ */
+
+/**
+ *	ifx_spi_spi_suspend	-	suspend SPI on system suspend
+ *	@dev: device being suspended
+ *
+ *	Suspend the SPI side. No action needed on Intel MID platforms, may
+ *	need extending for other systems.
+ */
+static int ifx_spi_spi_suspend(struct spi_device *spi, pm_message_t msg)
+{
+	return 0;
+}
+
+/**
+ *	ifx_spi_spi_resume	-	resume SPI side on system resume
+ *	@dev: device being suspended
+ *
+ *	Suspend the SPI side. No action needed on Intel MID platforms, may
+ *	need extending for other systems.
+ */
+static int ifx_spi_spi_resume(struct spi_device *spi)
+{
+	return 0;
+}
+
+/**
+ *	ifx_spi_pm_suspend	-	suspend modem on system suspend
+ *	@dev: device being suspended
+ *
+ *	Suspend the modem. No action needed on Intel MID platforms, may
+ *	need extending for other systems.
+ */
+static int ifx_spi_pm_suspend(struct device *dev)
+{
+	return 0;
+}
+
+/**
+ *	ifx_spi_pm_resume	-	resume modem on system resume
+ *	@dev: device being suspended
+ *
+ *	Allow the modem to resume. No action needed.
+ *
+ *	FIXME: do we need to reset anything here ?
+ */
+static int ifx_spi_pm_resume(struct device *dev)
+{
+	return 0;
+}
+
+/**
+ *	ifx_spi_pm_runtime_resume	-	suspend modem
+ *	@dev: device being suspended
+ *
+ *	Allow the modem to resume. No action needed.
+ */
+static int ifx_spi_pm_runtime_resume(struct device *dev)
+{
+	return 0;
+}
+
+/**
+ *	ifx_spi_pm_runtime_suspend	-	suspend modem
+ *	@dev: device being suspended
+ *
+ *	Allow the modem to suspend and thus suspend to continue up the
+ *	device tree.
+ */
+static int ifx_spi_pm_runtime_suspend(struct device *dev)
+{
+	return 0;
+}
+
+/**
+ *	ifx_spi_pm_runtime_idle		-	check if modem idle
+ *	@dev: our device
+ *
+ *	Check conditions and queue runtime suspend if idle.
+ */
+static int ifx_spi_pm_runtime_idle(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct ifx_spi_device *ifx_dev = spi_get_drvdata(spi);
+
+	if (!ifx_dev->power_status)
+		pm_runtime_suspend(dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops ifx_spi_pm = {
+	.resume = ifx_spi_pm_resume,
+	.suspend = ifx_spi_pm_suspend,
+	.runtime_resume = ifx_spi_pm_runtime_resume,
+	.runtime_suspend = ifx_spi_pm_runtime_suspend,
+	.runtime_idle = ifx_spi_pm_runtime_idle
+};
+
+static const struct spi_device_id ifx_id_table[] = {
+	{"ifx6160", 0},
+	{"ifx6260", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, ifx_id_table);
+
+/* spi operations */
+static const struct spi_driver ifx_spi_driver_6160 = {
+	.driver = {
+		.name = "ifx6160",
+		.bus = &spi_bus_type,
+		.pm = &ifx_spi_pm,
+		.owner = THIS_MODULE},
+	.probe = ifx_spi_spi_probe,
+	.shutdown = ifx_spi_spi_shutdown,
+	.remove = __devexit_p(ifx_spi_spi_remove),
+	.suspend = ifx_spi_spi_suspend,
+	.resume = ifx_spi_spi_resume,
+	.id_table = ifx_id_table
+};
+
+/**
+ *	ifx_spi_exit	-	module exit
+ *
+ *	Unload the module.
+ */
+
+static void __exit ifx_spi_exit(void)
+{
+	/* unregister */
+	tty_unregister_driver(tty_drv);
+	spi_unregister_driver((void *)&ifx_spi_driver_6160);
+}
+
+/**
+ *	ifx_spi_init		-	module entry point
+ *
+ *	Initialise the SPI and tty interfaces for the IFX SPI driver
+ *	We need to initialize upper-edge spi driver after the tty
+ *	driver because otherwise the spi probe will race
+ */
+
+static int __init ifx_spi_init(void)
+{
+	int result;
+
+	tty_drv = alloc_tty_driver(1);
+	if (!tty_drv) {
+		pr_err("%s: alloc_tty_driver failed", DRVNAME);
+		return -ENOMEM;
+	}
+
+	tty_drv->magic = TTY_DRIVER_MAGIC;
+	tty_drv->owner = THIS_MODULE;
+	tty_drv->driver_name = DRVNAME;
+	tty_drv->name = TTYNAME;
+	tty_drv->minor_start = IFX_SPI_TTY_ID;
+	tty_drv->num = 1;
+	tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
+	tty_drv->subtype = SERIAL_TYPE_NORMAL;
+	tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	tty_drv->init_termios = tty_std_termios;
+
+	tty_set_operations(tty_drv, &ifx_spi_serial_ops);
+
+	result = tty_register_driver(tty_drv);
+	if (result) {
+		pr_err("%s: tty_register_driver failed(%d)",
+			DRVNAME, result);
+		put_tty_driver(tty_drv);
+		return result;
+	}
+
+	result = spi_register_driver((void *)&ifx_spi_driver_6160);
+	if (result) {
+		pr_err("%s: spi_register_driver failed(%d)",
+			DRVNAME, result);
+		tty_unregister_driver(tty_drv);
+	}
+	return result;
+}
+
+module_init(ifx_spi_init);
+module_exit(ifx_spi_exit);
+
+MODULE_AUTHOR("Intel");
+MODULE_DESCRIPTION("IFX6x60 spi driver");
+MODULE_LICENSE("GPL");
+MODULE_INFO(Version, "0.1-IFX6x60");
diff --git a/drivers/serial/ifx6x60.h b/drivers/serial/ifx6x60.h
new file mode 100644
index 00000000000..deb7b8d977d
--- /dev/null
+++ b/drivers/serial/ifx6x60.h
@@ -0,0 +1,129 @@
+/****************************************************************************
+ *
+ * Driver for the IFX spi modem.
+ *
+ * Copyright (C) 2009, 2010 Intel Corp
+ * Jim Stanley <jim.stanley@intel.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
+ * USA
+ *
+ *
+ *
+ *****************************************************************************/
+#ifndef _IFX6X60_H
+#define _IFX6X60_H
+
+#define DRVNAME				"ifx6x60"
+#define TTYNAME				"ttyIFX"
+
+/* #define IFX_THROTTLE_CODE */
+
+#define IFX_SPI_MAX_MINORS		1
+#define IFX_SPI_TRANSFER_SIZE		2048
+#define IFX_SPI_FIFO_SIZE		4096
+
+#define IFX_SPI_HEADER_OVERHEAD		4
+#define IFX_RESET_TIMEOUT		msecs_to_jiffies(50)
+
+/* device flags bitfield definitions */
+#define IFX_SPI_STATE_PRESENT		0
+#define IFX_SPI_STATE_IO_IN_PROGRESS	1
+#define IFX_SPI_STATE_IO_READY		2
+#define IFX_SPI_STATE_TIMER_PENDING	3
+
+/* flow control bitfields */
+#define IFX_SPI_DCD			0
+#define IFX_SPI_CTS			1
+#define IFX_SPI_DSR			2
+#define IFX_SPI_RI			3
+#define IFX_SPI_DTR			4
+#define IFX_SPI_RTS			5
+#define IFX_SPI_TX_FC			6
+#define IFX_SPI_RX_FC			7
+#define IFX_SPI_UPDATE			8
+
+#define IFX_SPI_PAYLOAD_SIZE		(IFX_SPI_TRANSFER_SIZE - \
+						IFX_SPI_HEADER_OVERHEAD)
+
+#define IFX_SPI_IRQ_TYPE		DETECT_EDGE_RISING
+#define IFX_SPI_GPIO_TARGET		0
+#define IFX_SPI_GPIO0			0x105
+
+#define IFX_SPI_STATUS_TIMEOUT		(2000*HZ)
+
+/* values for bits in power status byte */
+#define IFX_SPI_POWER_DATA_PENDING	1
+#define IFX_SPI_POWER_SRDY		2
+
+struct ifx_spi_device {
+	/* Our SPI device */
+	struct spi_device *spi_dev;
+
+	/* Port specific data */
+	struct kfifo tx_fifo;
+	spinlock_t fifo_lock;
+	unsigned long signal_state;
+
+	/* TTY Layer logic */
+	struct tty_port tty_port;
+	struct device *tty_dev;
+	int minor;
+
+	/* Low level I/O work */
+	struct tasklet_struct io_work_tasklet;
+	unsigned long flags;
+	dma_addr_t rx_dma;
+	dma_addr_t tx_dma;
+
+	int is_6160;				/* Modem type */
+
+	spinlock_t write_lock;
+	int write_pending;
+	spinlock_t power_lock;
+	unsigned char power_status;
+
+	unsigned char *rx_buffer;
+	unsigned char *tx_buffer;
+	dma_addr_t rx_bus;
+	dma_addr_t tx_bus;
+	unsigned char spi_more;
+	unsigned char spi_slave_cts;
+
+	struct timer_list spi_timer;
+
+	struct spi_message spi_msg;
+	struct spi_transfer spi_xfer;
+
+	struct {
+		/* gpio lines */
+		unsigned short srdy;		/* slave-ready gpio */
+		unsigned short mrdy;		/* master-ready gpio */
+		unsigned short reset;		/* modem-reset gpio */
+		unsigned short po;		/* modem-on gpio */
+		unsigned short reset_out;	/* modem-in-reset gpio */
+		/* state/stats */
+		int unack_srdy_int_nb;
+	} gpio;
+
+	/* modem reset */
+	unsigned long mdm_reset_state;
+#define MR_START	0
+#define MR_INPROGRESS	1
+#define MR_COMPLETE	2
+	wait_queue_head_t mdm_reset_wait;
+};
+
+#endif /* _IFX6X60_H */
diff --git a/drivers/serial/kgdboc.c b/drivers/serial/kgdboc.c
index d4b711c9a41..25a8bc565f4 100644
--- a/drivers/serial/kgdboc.c
+++ b/drivers/serial/kgdboc.c
@@ -18,6 +18,7 @@
 #include <linux/tty.h>
 #include <linux/console.h>
 #include <linux/vt_kern.h>
+#include <linux/input.h>
 
 #define MAX_CONFIG_LEN		40
 
@@ -37,6 +38,62 @@ static struct tty_driver	*kgdb_tty_driver;
 static int			kgdb_tty_line;
 
 #ifdef CONFIG_KDB_KEYBOARD
+static int kgdboc_reset_connect(struct input_handler *handler,
+				struct input_dev *dev,
+				const struct input_device_id *id)
+{
+	input_reset_device(dev);
+
+	/* Retrun an error - we do not want to bind, just to reset */
+	return -ENODEV;
+}
+
+static void kgdboc_reset_disconnect(struct input_handle *handle)
+{
+	/* We do not expect anyone to actually bind to us */
+	BUG();
+}
+
+static const struct input_device_id kgdboc_reset_ids[] = {
+	{
+		.flags = INPUT_DEVICE_ID_MATCH_EVBIT,
+		.evbit = { BIT_MASK(EV_KEY) },
+	},
+	{ }
+};
+
+static struct input_handler kgdboc_reset_handler = {
+	.connect	= kgdboc_reset_connect,
+	.disconnect	= kgdboc_reset_disconnect,
+	.name		= "kgdboc_reset",
+	.id_table	= kgdboc_reset_ids,
+};
+
+static DEFINE_MUTEX(kgdboc_reset_mutex);
+
+static void kgdboc_restore_input_helper(struct work_struct *dummy)
+{
+	/*
+	 * We need to take a mutex to prevent several instances of
+	 * this work running on different CPUs so they don't try
+	 * to register again already registered handler.
+	 */
+	mutex_lock(&kgdboc_reset_mutex);
+
+	if (input_register_handler(&kgdboc_reset_handler) == 0)
+		input_unregister_handler(&kgdboc_reset_handler);
+
+	mutex_unlock(&kgdboc_reset_mutex);
+}
+
+static DECLARE_WORK(kgdboc_restore_input_work, kgdboc_restore_input_helper);
+
+static void kgdboc_restore_input(void)
+{
+	if (likely(system_state == SYSTEM_RUNNING))
+		schedule_work(&kgdboc_restore_input_work);
+}
+
 static int kgdboc_register_kbd(char **cptr)
 {
 	if (strncmp(*cptr, "kbd", 3) == 0) {
@@ -64,10 +121,12 @@ static void kgdboc_unregister_kbd(void)
 			i--;
 		}
 	}
+	flush_work_sync(&kgdboc_restore_input_work);
 }
 #else /* ! CONFIG_KDB_KEYBOARD */
 #define kgdboc_register_kbd(x) 0
 #define kgdboc_unregister_kbd()
+#define kgdboc_restore_input()
 #endif /* ! CONFIG_KDB_KEYBOARD */
 
 static int kgdboc_option_setup(char *opt)
@@ -231,6 +290,7 @@ static void kgdboc_post_exp_handler(void)
 		dbg_restore_graphics = 0;
 		con_debug_leave();
 	}
+	kgdboc_restore_input();
 }
 
 static struct kgdb_io kgdboc_io_ops = {
diff --git a/drivers/serial/mfd.c b/drivers/serial/mfd.c
index 5fc699e929d..d40010a22ec 100644
--- a/drivers/serial/mfd.c
+++ b/drivers/serial/mfd.c
@@ -900,8 +900,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
 	unsigned char cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
-	u32 mul = 0x3600;
-	u32 ps = 0x10;
+	u32 ps, mul;
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
@@ -943,31 +942,24 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
 	baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
 
 	quot = 1;
+	ps = 0x10;
+	mul = 0x3600;
 	switch (baud) {
 	case 3500000:
 		mul = 0x3345;
 		ps = 0xC;
 		break;
-	case 3000000:
-		mul = 0x2EE0;
-		break;
-	case 2500000:
-		mul = 0x2710;
-		break;
-	case 2000000:
-		mul = 0x1F40;
-		break;
 	case 1843200:
 		mul = 0x2400;
 		break;
+	case 3000000:
+	case 2500000:
+	case 2000000:
 	case 1500000:
-		mul = 0x1770;
-		break;
 	case 1000000:
-		mul = 0xFA0;
-		break;
 	case 500000:
-		mul = 0x7D0;
+		/* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */
+		mul = baud / 500000 * 0x9C4;
 		break;
 	default:
 		/* Use uart_get_divisor to get quot for other baud rates */
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index c4399e23565..126ec7f568e 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -838,7 +838,11 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new,
 static const char *
 mpc52xx_uart_type(struct uart_port *port)
 {
-	return port->type == PORT_MPC52xx ? "MPC52xx PSC" : NULL;
+	/*
+	 * We keep using PORT_MPC52xx for historic reasons although it applies
+	 * for MPC512x, too, but print "MPC5xxx" to not irritate users
+	 */
+	return port->type == PORT_MPC52xx ? "MPC5xxx PSC" : NULL;
 }
 
 static void
diff --git a/drivers/serial/msm_serial.c b/drivers/serial/msm_serial.c
index f8c816e7725..8e43a7b69e6 100644
--- a/drivers/serial/msm_serial.c
+++ b/drivers/serial/msm_serial.c
@@ -686,7 +686,7 @@ static int __init msm_serial_probe(struct platform_device *pdev)
 	msm_port = UART_TO_MSM(port);
 
 	msm_port->clk = clk_get(&pdev->dev, "uart_clk");
-	if (unlikely(IS_ERR(msm_port->clk)))
+	if (IS_ERR(msm_port->clk))
 		return PTR_ERR(msm_port->clk);
 	port->uartclk = clk_get_rate(msm_port->clk);
 	printk(KERN_INFO "uartclk = %d\n", port->uartclk);
diff --git a/drivers/serial/omap-serial.c b/drivers/serial/omap-serial.c
index 14365f72b66..7f2f0105878 100644
--- a/drivers/serial/omap-serial.c
+++ b/drivers/serial/omap-serial.c
@@ -570,7 +570,7 @@ serial_omap_configure_xonxoff
 	unsigned char efr = 0;
 
 	up->lcr = serial_in(up, UART_LCR);
-	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	up->efr = serial_in(up, UART_EFR);
 	serial_out(up, UART_EFR, up->efr & ~UART_EFR_ECB);
 
@@ -598,7 +598,7 @@ serial_omap_configure_xonxoff
 		efr |= OMAP_UART_SW_RX;
 
 	serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
-	serial_out(up, UART_LCR, UART_LCR_DLAB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 
 	up->mcr = serial_in(up, UART_MCR);
 
@@ -612,14 +612,14 @@ serial_omap_configure_xonxoff
 		up->mcr |= UART_MCR_XONANY;
 
 	serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
-	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
 	/* Enable special char function UARTi.EFR_REG[5] and
 	 * load the new software flow control mode IXON or IXOFF
 	 * and restore the UARTi.EFR_REG[4] ENHANCED_EN value.
 	 */
 	serial_out(up, UART_EFR, efr | UART_EFR_SCD);
-	serial_out(up, UART_LCR, UART_LCR_DLAB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 
 	serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR);
 	serial_out(up, UART_LCR, up->lcr);
@@ -724,22 +724,22 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * baud clock is not running
 	 * DLL_REG and DLH_REG set to 0.
 	 */
-	serial_out(up, UART_LCR, UART_LCR_DLAB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 	serial_out(up, UART_DLL, 0);
 	serial_out(up, UART_DLM, 0);
 	serial_out(up, UART_LCR, 0);
 
-	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 
 	up->efr = serial_in(up, UART_EFR);
 	serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
 
-	serial_out(up, UART_LCR, UART_LCR_DLAB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 	up->mcr = serial_in(up, UART_MCR);
 	serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
 	/* FIFO ENABLE, DMA MODE */
 	serial_out(up, UART_FCR, up->fcr);
-	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 
 	if (up->use_dma) {
 		serial_out(up, UART_TI752_TLR, 0);
@@ -748,52 +748,52 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	serial_out(up, UART_EFR, up->efr);
-	serial_out(up, UART_LCR, UART_LCR_DLAB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 	serial_out(up, UART_MCR, up->mcr);
 
 	/* Protocol, Baud Rate, and Interrupt Settings */
 
-	serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
-	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
+	serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 
 	up->efr = serial_in(up, UART_EFR);
 	serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
 
 	serial_out(up, UART_LCR, 0);
 	serial_out(up, UART_IER, 0);
-	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 
 	serial_out(up, UART_DLL, quot & 0xff);          /* LS of divisor */
 	serial_out(up, UART_DLM, quot >> 8);            /* MS of divisor */
 
 	serial_out(up, UART_LCR, 0);
 	serial_out(up, UART_IER, up->ier);
-	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 
 	serial_out(up, UART_EFR, up->efr);
 	serial_out(up, UART_LCR, cval);
 
 	if (baud > 230400 && baud != 3000000)
-		serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X);
+		serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE);
 	else
-		serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X);
+		serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
 
 	/* Hardware Flow Control Configuration */
 
 	if (termios->c_cflag & CRTSCTS) {
 		efr |= (UART_EFR_CTS | UART_EFR_RTS);
-		serial_out(up, UART_LCR, UART_LCR_DLAB);
+		serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 
 		up->mcr = serial_in(up, UART_MCR);
 		serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
 
-		serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
+		serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 		up->efr = serial_in(up, UART_EFR);
 		serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
 
 		serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
 		serial_out(up, UART_EFR, efr); /* Enable AUTORTS and AUTOCTS */
-		serial_out(up, UART_LCR, UART_LCR_DLAB);
+		serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
 		serial_out(up, UART_MCR, up->mcr | UART_MCR_RTS);
 		serial_out(up, UART_LCR, cval);
 	}
@@ -815,13 +815,13 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 	unsigned char efr;
 
 	dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id);
-	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	efr = serial_in(up, UART_EFR);
 	serial_out(up, UART_EFR, efr | UART_EFR_ECB);
 	serial_out(up, UART_LCR, 0);
 
 	serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);
-	serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
+	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
 	serial_out(up, UART_EFR, efr);
 	serial_out(up, UART_LCR, 0);
 	/* Enable module level wake up */
@@ -866,12 +866,6 @@ serial_omap_type(struct uart_port *port)
 	return up->name;
 }
 
-#ifdef CONFIG_SERIAL_OMAP_CONSOLE
-
-static struct uart_omap_port *serial_omap_console_ports[4];
-
-static struct uart_driver serial_omap_reg;
-
 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
 
 static inline void wait_for_xmitr(struct uart_omap_port *up)
@@ -905,6 +899,34 @@ static inline void wait_for_xmitr(struct uart_omap_port *up)
 	}
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+
+static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
+{
+	struct uart_omap_port *up = (struct uart_omap_port *)port;
+	wait_for_xmitr(up);
+	serial_out(up, UART_TX, ch);
+}
+
+static int serial_omap_poll_get_char(struct uart_port *port)
+{
+	struct uart_omap_port *up = (struct uart_omap_port *)port;
+	unsigned int status = serial_in(up, UART_LSR);
+
+	if (!(status & UART_LSR_DR))
+		return NO_POLL_CHAR;
+
+	return serial_in(up, UART_RX);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
+#ifdef CONFIG_SERIAL_OMAP_CONSOLE
+
+static struct uart_omap_port *serial_omap_console_ports[4];
+
+static struct uart_driver serial_omap_reg;
+
 static void serial_omap_console_putchar(struct uart_port *port, int ch)
 {
 	struct uart_omap_port *up = (struct uart_omap_port *)port;
@@ -1022,6 +1044,10 @@ static struct uart_ops serial_omap_pops = {
 	.request_port	= serial_omap_request_port,
 	.config_port	= serial_omap_config_port,
 	.verify_port	= serial_omap_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_put_char  = serial_omap_poll_put_char,
+	.poll_get_char  = serial_omap_poll_get_char,
+#endif
 };
 
 static struct uart_driver serial_omap_reg = {
diff --git a/drivers/serial/pch_uart.c b/drivers/serial/pch_uart.c
new file mode 100644
index 00000000000..70a61458ec4
--- /dev/null
+++ b/drivers/serial/pch_uart.c
@@ -0,0 +1,1451 @@
+/*
+ *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ *This program is free software; you can redistribute it and/or modify
+ *it under the terms of the GNU General Public License as published by
+ *the Free Software Foundation; version 2 of the License.
+ *
+ *This program is distributed in the hope that it will be useful,
+ *but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *GNU General Public License for more details.
+ *
+ *You should have received a copy of the GNU General Public License
+ *along with this program; if not, write to the Free Software
+ *Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/serial_reg.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/serial_core.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <linux/dmaengine.h>
+#include <linux/pch_dma.h>
+
+enum {
+	PCH_UART_HANDLED_RX_INT_SHIFT,
+	PCH_UART_HANDLED_TX_INT_SHIFT,
+	PCH_UART_HANDLED_RX_ERR_INT_SHIFT,
+	PCH_UART_HANDLED_RX_TRG_INT_SHIFT,
+	PCH_UART_HANDLED_MS_INT_SHIFT,
+};
+
+enum {
+	PCH_UART_8LINE,
+	PCH_UART_2LINE,
+};
+
+#define PCH_UART_DRIVER_DEVICE "ttyPCH"
+
+#define PCH_UART_NR_GE_256FIFO		1
+#define PCH_UART_NR_GE_64FIFO		3
+#define PCH_UART_NR_GE	(PCH_UART_NR_GE_256FIFO+PCH_UART_NR_GE_64FIFO)
+#define PCH_UART_NR	PCH_UART_NR_GE
+
+#define PCH_UART_HANDLED_RX_INT	(1<<((PCH_UART_HANDLED_RX_INT_SHIFT)<<1))
+#define PCH_UART_HANDLED_TX_INT	(1<<((PCH_UART_HANDLED_TX_INT_SHIFT)<<1))
+#define PCH_UART_HANDLED_RX_ERR_INT	(1<<((\
+					PCH_UART_HANDLED_RX_ERR_INT_SHIFT)<<1))
+#define PCH_UART_HANDLED_RX_TRG_INT	(1<<((\
+					PCH_UART_HANDLED_RX_TRG_INT_SHIFT)<<1))
+#define PCH_UART_HANDLED_MS_INT	(1<<((PCH_UART_HANDLED_MS_INT_SHIFT)<<1))
+
+#define PCH_UART_RBR		0x00
+#define PCH_UART_THR		0x00
+
+#define PCH_UART_IER_MASK	(PCH_UART_IER_ERBFI|PCH_UART_IER_ETBEI|\
+				PCH_UART_IER_ELSI|PCH_UART_IER_EDSSI)
+#define PCH_UART_IER_ERBFI	0x00000001
+#define PCH_UART_IER_ETBEI	0x00000002
+#define PCH_UART_IER_ELSI	0x00000004
+#define PCH_UART_IER_EDSSI	0x00000008
+
+#define PCH_UART_IIR_IP			0x00000001
+#define PCH_UART_IIR_IID		0x00000006
+#define PCH_UART_IIR_MSI		0x00000000
+#define PCH_UART_IIR_TRI		0x00000002
+#define PCH_UART_IIR_RRI		0x00000004
+#define PCH_UART_IIR_REI		0x00000006
+#define PCH_UART_IIR_TOI		0x00000008
+#define PCH_UART_IIR_FIFO256		0x00000020
+#define PCH_UART_IIR_FIFO64		PCH_UART_IIR_FIFO256
+#define PCH_UART_IIR_FE			0x000000C0
+
+#define PCH_UART_FCR_FIFOE		0x00000001
+#define PCH_UART_FCR_RFR		0x00000002
+#define PCH_UART_FCR_TFR		0x00000004
+#define PCH_UART_FCR_DMS		0x00000008
+#define PCH_UART_FCR_FIFO256		0x00000020
+#define PCH_UART_FCR_RFTL		0x000000C0
+
+#define PCH_UART_FCR_RFTL1		0x00000000
+#define PCH_UART_FCR_RFTL64		0x00000040
+#define PCH_UART_FCR_RFTL128		0x00000080
+#define PCH_UART_FCR_RFTL224		0x000000C0
+#define PCH_UART_FCR_RFTL16		PCH_UART_FCR_RFTL64
+#define PCH_UART_FCR_RFTL32		PCH_UART_FCR_RFTL128
+#define PCH_UART_FCR_RFTL56		PCH_UART_FCR_RFTL224
+#define PCH_UART_FCR_RFTL4		PCH_UART_FCR_RFTL64
+#define PCH_UART_FCR_RFTL8		PCH_UART_FCR_RFTL128
+#define PCH_UART_FCR_RFTL14		PCH_UART_FCR_RFTL224
+#define PCH_UART_FCR_RFTL_SHIFT		6
+
+#define PCH_UART_LCR_WLS	0x00000003
+#define PCH_UART_LCR_STB	0x00000004
+#define PCH_UART_LCR_PEN	0x00000008
+#define PCH_UART_LCR_EPS	0x00000010
+#define PCH_UART_LCR_SP		0x00000020
+#define PCH_UART_LCR_SB		0x00000040
+#define PCH_UART_LCR_DLAB	0x00000080
+#define PCH_UART_LCR_NP		0x00000000
+#define PCH_UART_LCR_OP		PCH_UART_LCR_PEN
+#define PCH_UART_LCR_EP		(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS)
+#define PCH_UART_LCR_1P		(PCH_UART_LCR_PEN | PCH_UART_LCR_SP)
+#define PCH_UART_LCR_0P		(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS |\
+				PCH_UART_LCR_SP)
+
+#define PCH_UART_LCR_5BIT	0x00000000
+#define PCH_UART_LCR_6BIT	0x00000001
+#define PCH_UART_LCR_7BIT	0x00000002
+#define PCH_UART_LCR_8BIT	0x00000003
+
+#define PCH_UART_MCR_DTR	0x00000001
+#define PCH_UART_MCR_RTS	0x00000002
+#define PCH_UART_MCR_OUT	0x0000000C
+#define PCH_UART_MCR_LOOP	0x00000010
+#define PCH_UART_MCR_AFE	0x00000020
+
+#define PCH_UART_LSR_DR		0x00000001
+#define PCH_UART_LSR_ERR	(1<<7)
+
+#define PCH_UART_MSR_DCTS	0x00000001
+#define PCH_UART_MSR_DDSR	0x00000002
+#define PCH_UART_MSR_TERI	0x00000004
+#define PCH_UART_MSR_DDCD	0x00000008
+#define PCH_UART_MSR_CTS	0x00000010
+#define PCH_UART_MSR_DSR	0x00000020
+#define PCH_UART_MSR_RI		0x00000040
+#define PCH_UART_MSR_DCD	0x00000080
+#define PCH_UART_MSR_DELTA	(PCH_UART_MSR_DCTS | PCH_UART_MSR_DDSR |\
+				PCH_UART_MSR_TERI | PCH_UART_MSR_DDCD)
+
+#define PCH_UART_DLL		0x00
+#define PCH_UART_DLM		0x01
+
+#define DIV_ROUND(a, b)	(((a) + ((b)/2)) / (b))
+
+#define PCH_UART_IID_RLS	(PCH_UART_IIR_REI)
+#define PCH_UART_IID_RDR	(PCH_UART_IIR_RRI)
+#define PCH_UART_IID_RDR_TO	(PCH_UART_IIR_RRI | PCH_UART_IIR_TOI)
+#define PCH_UART_IID_THRE	(PCH_UART_IIR_TRI)
+#define PCH_UART_IID_MS		(PCH_UART_IIR_MSI)
+
+#define PCH_UART_HAL_PARITY_NONE	(PCH_UART_LCR_NP)
+#define PCH_UART_HAL_PARITY_ODD		(PCH_UART_LCR_OP)
+#define PCH_UART_HAL_PARITY_EVEN	(PCH_UART_LCR_EP)
+#define PCH_UART_HAL_PARITY_FIX1	(PCH_UART_LCR_1P)
+#define PCH_UART_HAL_PARITY_FIX0	(PCH_UART_LCR_0P)
+#define PCH_UART_HAL_5BIT		(PCH_UART_LCR_5BIT)
+#define PCH_UART_HAL_6BIT		(PCH_UART_LCR_6BIT)
+#define PCH_UART_HAL_7BIT		(PCH_UART_LCR_7BIT)
+#define PCH_UART_HAL_8BIT		(PCH_UART_LCR_8BIT)
+#define PCH_UART_HAL_STB1		0
+#define PCH_UART_HAL_STB2		(PCH_UART_LCR_STB)
+
+#define PCH_UART_HAL_CLR_TX_FIFO	(PCH_UART_FCR_TFR)
+#define PCH_UART_HAL_CLR_RX_FIFO	(PCH_UART_FCR_RFR)
+#define PCH_UART_HAL_CLR_ALL_FIFO	(PCH_UART_HAL_CLR_TX_FIFO | \
+					PCH_UART_HAL_CLR_RX_FIFO)
+
+#define PCH_UART_HAL_DMA_MODE0		0
+#define PCH_UART_HAL_FIFO_DIS		0
+#define PCH_UART_HAL_FIFO16		(PCH_UART_FCR_FIFOE)
+#define PCH_UART_HAL_FIFO256		(PCH_UART_FCR_FIFOE | \
+					PCH_UART_FCR_FIFO256)
+#define PCH_UART_HAL_FIFO64		(PCH_UART_HAL_FIFO256)
+#define PCH_UART_HAL_TRIGGER1		(PCH_UART_FCR_RFTL1)
+#define PCH_UART_HAL_TRIGGER64		(PCH_UART_FCR_RFTL64)
+#define PCH_UART_HAL_TRIGGER128		(PCH_UART_FCR_RFTL128)
+#define PCH_UART_HAL_TRIGGER224		(PCH_UART_FCR_RFTL224)
+#define PCH_UART_HAL_TRIGGER16		(PCH_UART_FCR_RFTL16)
+#define PCH_UART_HAL_TRIGGER32		(PCH_UART_FCR_RFTL32)
+#define PCH_UART_HAL_TRIGGER56		(PCH_UART_FCR_RFTL56)
+#define PCH_UART_HAL_TRIGGER4		(PCH_UART_FCR_RFTL4)
+#define PCH_UART_HAL_TRIGGER8		(PCH_UART_FCR_RFTL8)
+#define PCH_UART_HAL_TRIGGER14		(PCH_UART_FCR_RFTL14)
+#define PCH_UART_HAL_TRIGGER_L		(PCH_UART_FCR_RFTL64)
+#define PCH_UART_HAL_TRIGGER_M		(PCH_UART_FCR_RFTL128)
+#define PCH_UART_HAL_TRIGGER_H		(PCH_UART_FCR_RFTL224)
+
+#define PCH_UART_HAL_RX_INT		(PCH_UART_IER_ERBFI)
+#define PCH_UART_HAL_TX_INT		(PCH_UART_IER_ETBEI)
+#define PCH_UART_HAL_RX_ERR_INT		(PCH_UART_IER_ELSI)
+#define PCH_UART_HAL_MS_INT		(PCH_UART_IER_EDSSI)
+#define PCH_UART_HAL_ALL_INT		(PCH_UART_IER_MASK)
+
+#define PCH_UART_HAL_DTR		(PCH_UART_MCR_DTR)
+#define PCH_UART_HAL_RTS		(PCH_UART_MCR_RTS)
+#define PCH_UART_HAL_OUT		(PCH_UART_MCR_OUT)
+#define PCH_UART_HAL_LOOP		(PCH_UART_MCR_LOOP)
+#define PCH_UART_HAL_AFE		(PCH_UART_MCR_AFE)
+
+struct pch_uart_buffer {
+	unsigned char *buf;
+	int size;
+};
+
+struct eg20t_port {
+	struct uart_port port;
+	int port_type;
+	void __iomem *membase;
+	resource_size_t mapbase;
+	unsigned int iobase;
+	struct pci_dev *pdev;
+	int fifo_size;
+	int base_baud;
+	int start_tx;
+	int start_rx;
+	int tx_empty;
+	int int_dis_flag;
+	int trigger;
+	int trigger_level;
+	struct pch_uart_buffer rxbuf;
+	unsigned int dmsr;
+	unsigned int fcr;
+	unsigned int use_dma;
+	unsigned int use_dma_flag;
+	struct dma_async_tx_descriptor	*desc_tx;
+	struct dma_async_tx_descriptor	*desc_rx;
+	struct pch_dma_slave		param_tx;
+	struct pch_dma_slave		param_rx;
+	struct dma_chan			*chan_tx;
+	struct dma_chan			*chan_rx;
+	struct scatterlist		sg_tx;
+	struct scatterlist		sg_rx;
+	int				tx_dma_use;
+	void				*rx_buf_virt;
+	dma_addr_t			rx_buf_dma;
+};
+
+static unsigned int default_baud = 9600;
+static const int trigger_level_256[4] = { 1, 64, 128, 224 };
+static const int trigger_level_64[4] = { 1, 16, 32, 56 };
+static const int trigger_level_16[4] = { 1, 4, 8, 14 };
+static const int trigger_level_1[4] = { 1, 1, 1, 1 };
+
+static void pch_uart_hal_request(struct pci_dev *pdev, int fifosize,
+				 int base_baud)
+{
+	struct eg20t_port *priv = pci_get_drvdata(pdev);
+
+	priv->trigger_level = 1;
+	priv->fcr = 0;
+}
+
+static unsigned int get_msr(struct eg20t_port *priv, void __iomem *base)
+{
+	unsigned int msr = ioread8(base + UART_MSR);
+	priv->dmsr |= msr & PCH_UART_MSR_DELTA;
+
+	return msr;
+}
+
+static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv,
+					  unsigned int flag)
+{
+	u8 ier = ioread8(priv->membase + UART_IER);
+	ier |= flag & PCH_UART_IER_MASK;
+	iowrite8(ier, priv->membase + UART_IER);
+}
+
+static void pch_uart_hal_disable_interrupt(struct eg20t_port *priv,
+					   unsigned int flag)
+{
+	u8 ier = ioread8(priv->membase + UART_IER);
+	ier &= ~(flag & PCH_UART_IER_MASK);
+	iowrite8(ier, priv->membase + UART_IER);
+}
+
+static int pch_uart_hal_set_line(struct eg20t_port *priv, int baud,
+				 unsigned int parity, unsigned int bits,
+				 unsigned int stb)
+{
+	unsigned int dll, dlm, lcr;
+	int div;
+
+	div = DIV_ROUND(priv->base_baud / 16, baud);
+	if (div < 0 || USHRT_MAX <= div) {
+		pr_err("Invalid Baud(div=0x%x)\n", div);
+		return -EINVAL;
+	}
+
+	dll = (unsigned int)div & 0x00FFU;
+	dlm = ((unsigned int)div >> 8) & 0x00FFU;
+
+	if (parity & ~(PCH_UART_LCR_PEN | PCH_UART_LCR_EPS | PCH_UART_LCR_SP)) {
+		pr_err("Invalid parity(0x%x)\n", parity);
+		return -EINVAL;
+	}
+
+	if (bits & ~PCH_UART_LCR_WLS) {
+		pr_err("Invalid bits(0x%x)\n", bits);
+		return -EINVAL;
+	}
+
+	if (stb & ~PCH_UART_LCR_STB) {
+		pr_err("Invalid STB(0x%x)\n", stb);
+		return -EINVAL;
+	}
+
+	lcr = parity;
+	lcr |= bits;
+	lcr |= stb;
+
+	pr_debug("%s:baud = %d, div = %04x, lcr = %02x (%lu)\n",
+		 __func__, baud, div, lcr, jiffies);
+	iowrite8(PCH_UART_LCR_DLAB, priv->membase + UART_LCR);
+	iowrite8(dll, priv->membase + PCH_UART_DLL);
+	iowrite8(dlm, priv->membase + PCH_UART_DLM);
+	iowrite8(lcr, priv->membase + UART_LCR);
+
+	return 0;
+}
+
+static int pch_uart_hal_fifo_reset(struct eg20t_port *priv,
+				    unsigned int flag)
+{
+	if (flag & ~(PCH_UART_FCR_TFR | PCH_UART_FCR_RFR)) {
+		pr_err("%s:Invalid flag(0x%x)\n", __func__, flag);
+		return -EINVAL;
+	}
+
+	iowrite8(PCH_UART_FCR_FIFOE | priv->fcr, priv->membase + UART_FCR);
+	iowrite8(PCH_UART_FCR_FIFOE | priv->fcr | flag,
+		 priv->membase + UART_FCR);
+	iowrite8(priv->fcr, priv->membase + UART_FCR);
+
+	return 0;
+}
+
+static int pch_uart_hal_set_fifo(struct eg20t_port *priv,
+				 unsigned int dmamode,
+				 unsigned int fifo_size, unsigned int trigger)
+{
+	u8 fcr;
+
+	if (dmamode & ~PCH_UART_FCR_DMS) {
+		pr_err("%s:Invalid DMA Mode(0x%x)\n", __func__, dmamode);
+		return -EINVAL;
+	}
+
+	if (fifo_size & ~(PCH_UART_FCR_FIFOE | PCH_UART_FCR_FIFO256)) {
+		pr_err("%s:Invalid FIFO SIZE(0x%x)\n", __func__, fifo_size);
+		return -EINVAL;
+	}
+
+	if (trigger & ~PCH_UART_FCR_RFTL) {
+		pr_err("%s:Invalid TRIGGER(0x%x)\n", __func__, trigger);
+		return -EINVAL;
+	}
+
+	switch (priv->fifo_size) {
+	case 256:
+		priv->trigger_level =
+		    trigger_level_256[trigger >> PCH_UART_FCR_RFTL_SHIFT];
+		break;
+	case 64:
+		priv->trigger_level =
+		    trigger_level_64[trigger >> PCH_UART_FCR_RFTL_SHIFT];
+		break;
+	case 16:
+		priv->trigger_level =
+		    trigger_level_16[trigger >> PCH_UART_FCR_RFTL_SHIFT];
+		break;
+	default:
+		priv->trigger_level =
+		    trigger_level_1[trigger >> PCH_UART_FCR_RFTL_SHIFT];
+		break;
+	}
+	fcr =
+	    dmamode | fifo_size | trigger | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR;
+	iowrite8(PCH_UART_FCR_FIFOE, priv->membase + UART_FCR);
+	iowrite8(PCH_UART_FCR_FIFOE | PCH_UART_FCR_RFR | PCH_UART_FCR_TFR,
+		 priv->membase + UART_FCR);
+	iowrite8(fcr, priv->membase + UART_FCR);
+	priv->fcr = fcr;
+
+	return 0;
+}
+
+static u8 pch_uart_hal_get_modem(struct eg20t_port *priv)
+{
+	priv->dmsr = 0;
+	return get_msr(priv, priv->membase);
+}
+
+static int pch_uart_hal_write(struct eg20t_port *priv,
+			      const unsigned char *buf, int tx_size)
+{
+	int i;
+	unsigned int thr;
+
+	for (i = 0; i < tx_size;) {
+		thr = buf[i++];
+		iowrite8(thr, priv->membase + PCH_UART_THR);
+	}
+	return i;
+}
+
+static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
+			     int rx_size)
+{
+	int i;
+	u8 rbr, lsr;
+
+	lsr = ioread8(priv->membase + UART_LSR);
+	for (i = 0, lsr = ioread8(priv->membase + UART_LSR);
+	     i < rx_size && lsr & UART_LSR_DR;
+	     lsr = ioread8(priv->membase + UART_LSR)) {
+		rbr = ioread8(priv->membase + PCH_UART_RBR);
+		buf[i++] = rbr;
+	}
+	return i;
+}
+
+static unsigned int pch_uart_hal_get_iid(struct eg20t_port *priv)
+{
+	unsigned int iir;
+	int ret;
+
+	iir = ioread8(priv->membase + UART_IIR);
+	ret = (iir & (PCH_UART_IIR_IID | PCH_UART_IIR_TOI | PCH_UART_IIR_IP));
+	return ret;
+}
+
+static u8 pch_uart_hal_get_line_status(struct eg20t_port *priv)
+{
+	return ioread8(priv->membase + UART_LSR);
+}
+
+static void pch_uart_hal_set_break(struct eg20t_port *priv, int on)
+{
+	unsigned int lcr;
+
+	lcr = ioread8(priv->membase + UART_LCR);
+	if (on)
+		lcr |= PCH_UART_LCR_SB;
+	else
+		lcr &= ~PCH_UART_LCR_SB;
+
+	iowrite8(lcr, priv->membase + UART_LCR);
+}
+
+static int push_rx(struct eg20t_port *priv, const unsigned char *buf,
+		   int size)
+{
+	struct uart_port *port;
+	struct tty_struct *tty;
+
+	port = &priv->port;
+	tty = tty_port_tty_get(&port->state->port);
+	if (!tty) {
+		pr_debug("%s:tty is busy now", __func__);
+		return -EBUSY;
+	}
+
+	tty_insert_flip_string(tty, buf, size);
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+
+	return 0;
+}
+
+static int pop_tx_x(struct eg20t_port *priv, unsigned char *buf)
+{
+	int ret;
+	struct uart_port *port = &priv->port;
+
+	if (port->x_char) {
+		pr_debug("%s:X character send %02x (%lu)\n", __func__,
+			port->x_char, jiffies);
+		buf[0] = port->x_char;
+		port->x_char = 0;
+		ret = 1;
+	} else {
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static int dma_push_rx(struct eg20t_port *priv, int size)
+{
+	struct tty_struct *tty;
+	int room;
+	struct uart_port *port = &priv->port;
+
+	port = &priv->port;
+	tty = tty_port_tty_get(&port->state->port);
+	if (!tty) {
+		pr_debug("%s:tty is busy now", __func__);
+		return 0;
+	}
+
+	room = tty_buffer_request_room(tty, size);
+
+	if (room < size)
+		dev_warn(port->dev, "Rx overrun: dropping %u bytes\n",
+			 size - room);
+	if (!room)
+		return room;
+
+	tty_insert_flip_string(tty, sg_virt(&priv->sg_rx), size);
+
+	port->icount.rx += room;
+	tty_kref_put(tty);
+
+	return room;
+}
+
+static void pch_free_dma(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+	priv = container_of(port, struct eg20t_port, port);
+
+	if (priv->chan_tx) {
+		dma_release_channel(priv->chan_tx);
+		priv->chan_tx = NULL;
+	}
+	if (priv->chan_rx) {
+		dma_release_channel(priv->chan_rx);
+		priv->chan_rx = NULL;
+	}
+	if (sg_dma_address(&priv->sg_rx))
+		dma_free_coherent(port->dev, port->fifosize,
+				  sg_virt(&priv->sg_rx),
+				  sg_dma_address(&priv->sg_rx));
+
+	return;
+}
+
+static bool filter(struct dma_chan *chan, void *slave)
+{
+	struct pch_dma_slave *param = slave;
+
+	if ((chan->chan_id == param->chan_id) && (param->dma_dev ==
+						  chan->device->dev)) {
+		chan->private = param;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+static void pch_request_dma(struct uart_port *port)
+{
+	dma_cap_mask_t mask;
+	struct dma_chan *chan;
+	struct pci_dev *dma_dev;
+	struct pch_dma_slave *param;
+	struct eg20t_port *priv =
+				container_of(port, struct eg20t_port, port);
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	dma_dev = pci_get_bus_and_slot(2, PCI_DEVFN(0xa, 0)); /* Get DMA's dev
+								information */
+	/* Set Tx DMA */
+	param = &priv->param_tx;
+	param->dma_dev = &dma_dev->dev;
+	param->chan_id = priv->port.line;
+	param->tx_reg = port->mapbase + UART_TX;
+	chan = dma_request_channel(mask, filter, param);
+	if (!chan) {
+		pr_err("%s:dma_request_channel FAILS(Tx)\n", __func__);
+		return;
+	}
+	priv->chan_tx = chan;
+
+	/* Set Rx DMA */
+	param = &priv->param_rx;
+	param->dma_dev = &dma_dev->dev;
+	param->chan_id = priv->port.line + 1; /* Rx = Tx + 1 */
+	param->rx_reg = port->mapbase + UART_RX;
+	chan = dma_request_channel(mask, filter, param);
+	if (!chan) {
+		pr_err("%s:dma_request_channel FAILS(Rx)\n", __func__);
+		dma_release_channel(priv->chan_tx);
+		return;
+	}
+
+	/* Get Consistent memory for DMA */
+	priv->rx_buf_virt = dma_alloc_coherent(port->dev, port->fifosize,
+				    &priv->rx_buf_dma, GFP_KERNEL);
+	priv->chan_rx = chan;
+}
+
+static void pch_dma_rx_complete(void *arg)
+{
+	struct eg20t_port *priv = arg;
+	struct uart_port *port = &priv->port;
+	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+
+	if (!tty) {
+		pr_debug("%s:tty is busy now", __func__);
+		return;
+	}
+
+	if (dma_push_rx(priv, priv->trigger_level))
+		tty_flip_buffer_push(tty);
+
+	tty_kref_put(tty);
+}
+
+static void pch_dma_tx_complete(void *arg)
+{
+	struct eg20t_port *priv = arg;
+	struct uart_port *port = &priv->port;
+	struct circ_buf *xmit = &port->state->xmit;
+
+	xmit->tail += sg_dma_len(&priv->sg_tx);
+	xmit->tail &= UART_XMIT_SIZE - 1;
+	port->icount.tx += sg_dma_len(&priv->sg_tx);
+
+	async_tx_ack(priv->desc_tx);
+	priv->tx_dma_use = 0;
+}
+
+static int pop_tx(struct eg20t_port *priv, unsigned char *buf, int size)
+{
+	int count = 0;
+	struct uart_port *port = &priv->port;
+	struct circ_buf *xmit = &port->state->xmit;
+
+	if (uart_tx_stopped(port) || uart_circ_empty(xmit) || count >= size)
+		goto pop_tx_end;
+
+	do {
+		int cnt_to_end =
+		    CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+		int sz = min(size - count, cnt_to_end);
+		memcpy(&buf[count], &xmit->buf[xmit->tail], sz);
+		xmit->tail = (xmit->tail + sz) & (UART_XMIT_SIZE - 1);
+		count += sz;
+	} while (!uart_circ_empty(xmit) && count < size);
+
+pop_tx_end:
+	pr_debug("%d characters. Remained %d characters. (%lu)\n",
+		 count, size - count, jiffies);
+
+	return count;
+}
+
+static int handle_rx_to(struct eg20t_port *priv)
+{
+	struct pch_uart_buffer *buf;
+	int rx_size;
+	int ret;
+	if (!priv->start_rx) {
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+		return 0;
+	}
+	buf = &priv->rxbuf;
+	do {
+		rx_size = pch_uart_hal_read(priv, buf->buf, buf->size);
+		ret = push_rx(priv, buf->buf, rx_size);
+		if (ret)
+			return 0;
+	} while (rx_size == buf->size);
+
+	return PCH_UART_HANDLED_RX_INT;
+}
+
+static int handle_rx(struct eg20t_port *priv)
+{
+	return handle_rx_to(priv);
+}
+
+static int dma_handle_rx(struct eg20t_port *priv)
+{
+	struct uart_port *port = &priv->port;
+	struct dma_async_tx_descriptor *desc;
+	struct scatterlist *sg;
+
+	priv = container_of(port, struct eg20t_port, port);
+	sg = &priv->sg_rx;
+
+	sg_init_table(&priv->sg_rx, 1); /* Initialize SG table */
+
+	sg_dma_len(sg) = priv->fifo_size;
+
+	sg_set_page(&priv->sg_rx, virt_to_page(priv->rx_buf_virt),
+		     sg_dma_len(sg), (unsigned long)priv->rx_buf_virt &
+		     ~PAGE_MASK);
+
+	sg_dma_address(sg) = priv->rx_buf_dma;
+
+	desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx,
+			sg, 1, DMA_FROM_DEVICE,
+			DMA_PREP_INTERRUPT);
+	if (!desc)
+		return 0;
+
+	priv->desc_rx = desc;
+	desc->callback = pch_dma_rx_complete;
+	desc->callback_param = priv;
+	desc->tx_submit(desc);
+	dma_async_issue_pending(priv->chan_rx);
+
+	return PCH_UART_HANDLED_RX_INT;
+}
+
+static unsigned int handle_tx(struct eg20t_port *priv)
+{
+	struct uart_port *port = &priv->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	int ret;
+	int fifo_size;
+	int tx_size;
+	int size;
+	int tx_empty;
+
+	if (!priv->start_tx) {
+		pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		priv->tx_empty = 1;
+		return 0;
+	}
+
+	fifo_size = max(priv->fifo_size, 1);
+	tx_empty = 1;
+	if (pop_tx_x(priv, xmit->buf)) {
+		pch_uart_hal_write(priv, xmit->buf, 1);
+		port->icount.tx++;
+		tx_empty = 0;
+		fifo_size--;
+	}
+	size = min(xmit->head - xmit->tail, fifo_size);
+	tx_size = pop_tx(priv, xmit->buf, size);
+	if (tx_size > 0) {
+		ret = pch_uart_hal_write(priv, xmit->buf, tx_size);
+		port->icount.tx += ret;
+		tx_empty = 0;
+	}
+
+	priv->tx_empty = tx_empty;
+
+	if (tx_empty)
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+
+	return PCH_UART_HANDLED_TX_INT;
+}
+
+static unsigned int dma_handle_tx(struct eg20t_port *priv)
+{
+	struct uart_port *port = &priv->port;
+	struct circ_buf *xmit = &port->state->xmit;
+	struct scatterlist *sg = &priv->sg_tx;
+	int nent;
+	int fifo_size;
+	int tx_empty;
+	struct dma_async_tx_descriptor *desc;
+
+	if (!priv->start_tx) {
+		pr_info("%s:Tx isn't started. (%lu)\n", __func__, jiffies);
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+		priv->tx_empty = 1;
+		return 0;
+	}
+
+	fifo_size = max(priv->fifo_size, 1);
+	tx_empty = 1;
+	if (pop_tx_x(priv, xmit->buf)) {
+		pch_uart_hal_write(priv, xmit->buf, 1);
+		port->icount.tx++;
+		tx_empty = 0;
+		fifo_size--;
+	}
+
+	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_TX_INT);
+
+	priv->tx_dma_use = 1;
+
+	sg_init_table(&priv->sg_tx, 1); /* Initialize SG table */
+
+	sg_set_page(&priv->sg_tx, virt_to_page(xmit->buf),
+		    UART_XMIT_SIZE, (int)xmit->buf & ~PAGE_MASK);
+
+	nent = dma_map_sg(port->dev, &priv->sg_tx, 1, DMA_TO_DEVICE);
+	if (!nent) {
+		pr_err("%s:dma_map_sg Failed\n", __func__);
+		return 0;
+	}
+
+	sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
+	sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
+			      sg->offset;
+	sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail,
+			     UART_XMIT_SIZE), CIRC_CNT_TO_END(xmit->head,
+			     xmit->tail, UART_XMIT_SIZE));
+
+	desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx,
+		sg, nent, DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+	if (!desc) {
+		pr_err("%s:device_prep_slave_sg Failed\n", __func__);
+		return 0;
+	}
+
+	dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
+
+	priv->desc_tx = desc;
+	desc->callback = pch_dma_tx_complete;
+	desc->callback_param = priv;
+
+	desc->tx_submit(desc);
+
+	dma_async_issue_pending(priv->chan_tx);
+
+	return PCH_UART_HANDLED_TX_INT;
+}
+
+static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr)
+{
+	u8 fcr = ioread8(priv->membase + UART_FCR);
+
+	/* Reset FIFO */
+	fcr |= UART_FCR_CLEAR_RCVR;
+	iowrite8(fcr, priv->membase + UART_FCR);
+
+	if (lsr & PCH_UART_LSR_ERR)
+		dev_err(&priv->pdev->dev, "Error data in FIFO\n");
+
+	if (lsr & UART_LSR_FE)
+		dev_err(&priv->pdev->dev, "Framing Error\n");
+
+	if (lsr & UART_LSR_PE)
+		dev_err(&priv->pdev->dev, "Parity Error\n");
+
+	if (lsr & UART_LSR_OE)
+		dev_err(&priv->pdev->dev, "Overrun Error\n");
+}
+
+static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
+{
+	struct eg20t_port *priv = dev_id;
+	unsigned int handled;
+	u8 lsr;
+	int ret = 0;
+	unsigned int iid;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->port.lock, flags);
+	handled = 0;
+	while ((iid = pch_uart_hal_get_iid(priv)) > 1) {
+		switch (iid) {
+		case PCH_UART_IID_RLS:	/* Receiver Line Status */
+			lsr = pch_uart_hal_get_line_status(priv);
+			if (lsr & (PCH_UART_LSR_ERR | UART_LSR_FE |
+						UART_LSR_PE | UART_LSR_OE)) {
+				pch_uart_err_ir(priv, lsr);
+				ret = PCH_UART_HANDLED_RX_ERR_INT;
+			}
+			break;
+		case PCH_UART_IID_RDR:	/* Received Data Ready */
+			if (priv->use_dma)
+				ret = dma_handle_rx(priv);
+			else
+				ret = handle_rx(priv);
+			break;
+		case PCH_UART_IID_RDR_TO:	/* Received Data Ready
+						   (FIFO Timeout) */
+			ret = handle_rx_to(priv);
+			break;
+		case PCH_UART_IID_THRE:	/* Transmitter Holding Register
+						   Empty */
+			if (priv->use_dma)
+				ret = dma_handle_tx(priv);
+			else
+				ret = handle_tx(priv);
+			break;
+		case PCH_UART_IID_MS:	/* Modem Status */
+			ret = PCH_UART_HANDLED_MS_INT;
+			break;
+		default:	/* Never junp to this label */
+			pr_err("%s:iid=%d (%lu)\n", __func__, iid, jiffies);
+			ret = -1;
+			break;
+		}
+		handled |= (unsigned int)ret;
+	}
+	if (handled == 0 && iid <= 1) {
+		if (priv->int_dis_flag)
+			priv->int_dis_flag = 0;
+	}
+
+	spin_unlock_irqrestore(&priv->port.lock, flags);
+	return IRQ_RETVAL(handled);
+}
+
+/* This function tests whether the transmitter fifo and shifter for the port
+						described by 'port' is empty. */
+static unsigned int pch_uart_tx_empty(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+	int ret;
+	priv = container_of(port, struct eg20t_port, port);
+	if (priv->tx_empty)
+		ret = TIOCSER_TEMT;
+	else
+		ret = 0;
+
+	return ret;
+}
+
+/* Returns the current state of modem control inputs. */
+static unsigned int pch_uart_get_mctrl(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+	u8 modem;
+	unsigned int ret = 0;
+
+	priv = container_of(port, struct eg20t_port, port);
+	modem = pch_uart_hal_get_modem(priv);
+
+	if (modem & UART_MSR_DCD)
+		ret |= TIOCM_CAR;
+
+	if (modem & UART_MSR_RI)
+		ret |= TIOCM_RNG;
+
+	if (modem & UART_MSR_DSR)
+		ret |= TIOCM_DSR;
+
+	if (modem & UART_MSR_CTS)
+		ret |= TIOCM_CTS;
+
+	return ret;
+}
+
+static void pch_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	u32 mcr = 0;
+	unsigned int dat;
+	struct eg20t_port *priv = container_of(port, struct eg20t_port, port);
+
+	if (mctrl & TIOCM_DTR)
+		mcr |= UART_MCR_DTR;
+	if (mctrl & TIOCM_RTS)
+		mcr |= UART_MCR_RTS;
+	if (mctrl & TIOCM_LOOP)
+		mcr |= UART_MCR_LOOP;
+
+	if (mctrl) {
+		dat = pch_uart_get_mctrl(port);
+		dat |= mcr;
+		iowrite8(dat, priv->membase + UART_MCR);
+	}
+}
+
+static void pch_uart_stop_tx(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+	priv = container_of(port, struct eg20t_port, port);
+	priv->start_tx = 0;
+	priv->tx_dma_use = 0;
+}
+
+static void pch_uart_start_tx(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+
+	priv = container_of(port, struct eg20t_port, port);
+
+	if (priv->use_dma)
+		if (priv->tx_dma_use)
+			return;
+
+	priv->start_tx = 1;
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_TX_INT);
+}
+
+static void pch_uart_stop_rx(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+	priv = container_of(port, struct eg20t_port, port);
+	priv->start_rx = 0;
+	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+	priv->int_dis_flag = 1;
+}
+
+/* Enable the modem status interrupts. */
+static void pch_uart_enable_ms(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+	priv = container_of(port, struct eg20t_port, port);
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_MS_INT);
+}
+
+/* Control the transmission of a break signal. */
+static void pch_uart_break_ctl(struct uart_port *port, int ctl)
+{
+	struct eg20t_port *priv;
+	unsigned long flags;
+
+	priv = container_of(port, struct eg20t_port, port);
+	spin_lock_irqsave(&port->lock, flags);
+	pch_uart_hal_set_break(priv, ctl);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/* Grab any interrupt resources and initialise any low level driver state. */
+static int pch_uart_startup(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+	int ret;
+	int fifo_size;
+	int trigger_level;
+
+	priv = container_of(port, struct eg20t_port, port);
+	priv->tx_empty = 1;
+	port->uartclk = priv->base_baud;
+	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
+	ret = pch_uart_hal_set_line(priv, default_baud,
+			      PCH_UART_HAL_PARITY_NONE, PCH_UART_HAL_8BIT,
+			      PCH_UART_HAL_STB1);
+	if (ret)
+		return ret;
+
+	switch (priv->fifo_size) {
+	case 256:
+		fifo_size = PCH_UART_HAL_FIFO256;
+		break;
+	case 64:
+		fifo_size = PCH_UART_HAL_FIFO64;
+		break;
+	case 16:
+		fifo_size = PCH_UART_HAL_FIFO16;
+	case 1:
+	default:
+		fifo_size = PCH_UART_HAL_FIFO_DIS;
+		break;
+	}
+
+	switch (priv->trigger) {
+	case PCH_UART_HAL_TRIGGER1:
+		trigger_level = 1;
+		break;
+	case PCH_UART_HAL_TRIGGER_L:
+		trigger_level = priv->fifo_size / 4;
+		break;
+	case PCH_UART_HAL_TRIGGER_M:
+		trigger_level = priv->fifo_size / 2;
+		break;
+	case PCH_UART_HAL_TRIGGER_H:
+	default:
+		trigger_level = priv->fifo_size - (priv->fifo_size / 8);
+		break;
+	}
+
+	priv->trigger_level = trigger_level;
+	ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
+				    fifo_size, priv->trigger);
+	if (ret < 0)
+		return ret;
+
+	ret = request_irq(priv->port.irq, pch_uart_interrupt, IRQF_SHARED,
+			KBUILD_MODNAME, priv);
+	if (ret < 0)
+		return ret;
+
+	if (priv->use_dma)
+		pch_request_dma(port);
+
+	priv->start_rx = 1;
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+	uart_update_timeout(port, CS8, default_baud);
+
+	return 0;
+}
+
+static void pch_uart_shutdown(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+	int ret;
+
+	priv = container_of(port, struct eg20t_port, port);
+	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT);
+	pch_uart_hal_fifo_reset(priv, PCH_UART_HAL_CLR_ALL_FIFO);
+	ret = pch_uart_hal_set_fifo(priv, PCH_UART_HAL_DMA_MODE0,
+			      PCH_UART_HAL_FIFO_DIS, PCH_UART_HAL_TRIGGER1);
+	if (ret)
+		pr_err("pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
+
+	if (priv->use_dma_flag)
+		pch_free_dma(port);
+
+	free_irq(priv->port.irq, priv);
+}
+
+/* Change the port parameters, including word length, parity, stop
+ *bits.  Update read_status_mask and ignore_status_mask to indicate
+ *the types of events we are interested in receiving.  */
+static void pch_uart_set_termios(struct uart_port *port,
+				 struct ktermios *termios, struct ktermios *old)
+{
+	int baud;
+	int rtn;
+	unsigned int parity, bits, stb;
+	struct eg20t_port *priv;
+	unsigned long flags;
+
+	priv = container_of(port, struct eg20t_port, port);
+	switch (termios->c_cflag & CSIZE) {
+	case CS5:
+		bits = PCH_UART_HAL_5BIT;
+		break;
+	case CS6:
+		bits = PCH_UART_HAL_6BIT;
+		break;
+	case CS7:
+		bits = PCH_UART_HAL_7BIT;
+		break;
+	default:		/* CS8 */
+		bits = PCH_UART_HAL_8BIT;
+		break;
+	}
+	if (termios->c_cflag & CSTOPB)
+		stb = PCH_UART_HAL_STB2;
+	else
+		stb = PCH_UART_HAL_STB1;
+
+	if (termios->c_cflag & PARENB) {
+		if (!(termios->c_cflag & PARODD))
+			parity = PCH_UART_HAL_PARITY_ODD;
+		else
+			parity = PCH_UART_HAL_PARITY_EVEN;
+
+	} else {
+		parity = PCH_UART_HAL_PARITY_NONE;
+	}
+	termios->c_cflag &= ~CMSPAR; /* Mark/Space parity is not supported */
+
+	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+	rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
+	if (rtn)
+		goto out;
+
+	/* Don't rewrite B0 */
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+
+out:
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *pch_uart_type(struct uart_port *port)
+{
+	return KBUILD_MODNAME;
+}
+
+static void pch_uart_release_port(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+
+	priv = container_of(port, struct eg20t_port, port);
+	pci_iounmap(priv->pdev, priv->membase);
+	pci_release_regions(priv->pdev);
+}
+
+static int pch_uart_request_port(struct uart_port *port)
+{
+	struct eg20t_port *priv;
+	int ret;
+	void __iomem *membase;
+
+	priv = container_of(port, struct eg20t_port, port);
+	ret = pci_request_regions(priv->pdev, KBUILD_MODNAME);
+	if (ret < 0)
+		return -EBUSY;
+
+	membase = pci_iomap(priv->pdev, 1, 0);
+	if (!membase) {
+		pci_release_regions(priv->pdev);
+		return -EBUSY;
+	}
+	priv->membase = port->membase = membase;
+
+	return 0;
+}
+
+static void pch_uart_config_port(struct uart_port *port, int type)
+{
+	struct eg20t_port *priv;
+
+	priv = container_of(port, struct eg20t_port, port);
+	if (type & UART_CONFIG_TYPE) {
+		port->type = priv->port_type;
+		pch_uart_request_port(port);
+	}
+}
+
+static int pch_uart_verify_port(struct uart_port *port,
+				struct serial_struct *serinfo)
+{
+	struct eg20t_port *priv;
+
+	priv = container_of(port, struct eg20t_port, port);
+	if (serinfo->flags & UPF_LOW_LATENCY) {
+		pr_info("PCH UART : Use PIO Mode (without DMA)\n");
+		priv->use_dma = 0;
+		serinfo->flags &= ~UPF_LOW_LATENCY;
+	} else {
+#ifndef CONFIG_PCH_DMA
+		pr_err("%s : PCH DMA is not Loaded.\n", __func__);
+		return -EOPNOTSUPP;
+#endif
+		priv->use_dma = 1;
+		priv->use_dma_flag = 1;
+		pr_info("PCH UART : Use DMA Mode\n");
+	}
+
+	return 0;
+}
+
+static struct uart_ops pch_uart_ops = {
+	.tx_empty = pch_uart_tx_empty,
+	.set_mctrl = pch_uart_set_mctrl,
+	.get_mctrl = pch_uart_get_mctrl,
+	.stop_tx = pch_uart_stop_tx,
+	.start_tx = pch_uart_start_tx,
+	.stop_rx = pch_uart_stop_rx,
+	.enable_ms = pch_uart_enable_ms,
+	.break_ctl = pch_uart_break_ctl,
+	.startup = pch_uart_startup,
+	.shutdown = pch_uart_shutdown,
+	.set_termios = pch_uart_set_termios,
+/*	.pm		= pch_uart_pm,		Not supported yet */
+/*	.set_wake	= pch_uart_set_wake,	Not supported yet */
+	.type = pch_uart_type,
+	.release_port = pch_uart_release_port,
+	.request_port = pch_uart_request_port,
+	.config_port = pch_uart_config_port,
+	.verify_port = pch_uart_verify_port
+};
+
+static struct uart_driver pch_uart_driver = {
+	.owner = THIS_MODULE,
+	.driver_name = KBUILD_MODNAME,
+	.dev_name = PCH_UART_DRIVER_DEVICE,
+	.major = 0,
+	.minor = 0,
+	.nr = PCH_UART_NR,
+};
+
+static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
+						int port_type)
+{
+	struct eg20t_port *priv;
+	int ret;
+	unsigned int iobase;
+	unsigned int mapbase;
+	unsigned char *rxbuf;
+	int fifosize, base_baud;
+	static int num;
+
+	priv = kzalloc(sizeof(struct eg20t_port), GFP_KERNEL);
+	if (priv == NULL)
+		goto init_port_alloc_err;
+
+	rxbuf = (unsigned char *)__get_free_page(GFP_KERNEL);
+	if (!rxbuf)
+		goto init_port_free_txbuf;
+
+	switch (port_type) {
+	case PORT_UNKNOWN:
+		fifosize = 256; /* UART0 */
+		base_baud = 1843200; /* 1.8432MHz */
+		break;
+	case PORT_8250:
+		fifosize = 64; /* UART1~3 */
+		base_baud = 1843200; /* 1.8432MHz */
+		break;
+	default:
+		dev_err(&pdev->dev, "Invalid Port Type(=%d)\n", port_type);
+		goto init_port_hal_free;
+	}
+
+	iobase = pci_resource_start(pdev, 0);
+	mapbase = pci_resource_start(pdev, 1);
+	priv->mapbase = mapbase;
+	priv->iobase = iobase;
+	priv->pdev = pdev;
+	priv->tx_empty = 1;
+	priv->rxbuf.buf = rxbuf;
+	priv->rxbuf.size = PAGE_SIZE;
+
+	priv->fifo_size = fifosize;
+	priv->base_baud = base_baud;
+	priv->port_type = PORT_MAX_8250 + port_type + 1;
+	priv->port.dev = &pdev->dev;
+	priv->port.iobase = iobase;
+	priv->port.membase = NULL;
+	priv->port.mapbase = mapbase;
+	priv->port.irq = pdev->irq;
+	priv->port.iotype = UPIO_PORT;
+	priv->port.ops = &pch_uart_ops;
+	priv->port.flags = UPF_BOOT_AUTOCONF;
+	priv->port.fifosize = fifosize;
+	priv->port.line = num++;
+	priv->trigger = PCH_UART_HAL_TRIGGER_M;
+
+	pci_set_drvdata(pdev, priv);
+	pch_uart_hal_request(pdev, fifosize, base_baud);
+	ret = uart_add_one_port(&pch_uart_driver, &priv->port);
+	if (ret < 0)
+		goto init_port_hal_free;
+
+	return priv;
+
+init_port_hal_free:
+	free_page((unsigned long)rxbuf);
+init_port_free_txbuf:
+	kfree(priv);
+init_port_alloc_err:
+
+	return NULL;
+}
+
+static void pch_uart_exit_port(struct eg20t_port *priv)
+{
+	uart_remove_one_port(&pch_uart_driver, &priv->port);
+	pci_set_drvdata(priv->pdev, NULL);
+	free_page((unsigned long)priv->rxbuf.buf);
+}
+
+static void pch_uart_pci_remove(struct pci_dev *pdev)
+{
+	struct eg20t_port *priv;
+
+	priv = (struct eg20t_port *)pci_get_drvdata(pdev);
+	pch_uart_exit_port(priv);
+	pci_disable_device(pdev);
+	kfree(priv);
+	return;
+}
+#ifdef CONFIG_PM
+static int pch_uart_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct eg20t_port *priv = pci_get_drvdata(pdev);
+
+	uart_suspend_port(&pch_uart_driver, &priv->port);
+
+	pci_save_state(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
+}
+
+static int pch_uart_pci_resume(struct pci_dev *pdev)
+{
+	struct eg20t_port *priv = pci_get_drvdata(pdev);
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev,
+		"%s-pci_enable_device failed(ret=%d) ", __func__, ret);
+		return ret;
+	}
+
+	uart_resume_port(&pch_uart_driver, &priv->port);
+
+	return 0;
+}
+#else
+#define pch_uart_pci_suspend NULL
+#define pch_uart_pci_resume NULL
+#endif
+
+static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8811),
+	 .driver_data = PCH_UART_8LINE},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8812),
+	 .driver_data = PCH_UART_2LINE},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8813),
+	 .driver_data = PCH_UART_2LINE},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8814),
+	 .driver_data = PCH_UART_2LINE},
+	{0,},
+};
+
+static int __devinit pch_uart_pci_probe(struct pci_dev *pdev,
+					const struct pci_device_id *id)
+{
+	int ret;
+	struct eg20t_port *priv;
+
+	ret = pci_enable_device(pdev);
+	if (ret < 0)
+		goto probe_error;
+
+	priv = pch_uart_init_port(pdev, id->driver_data);
+	if (!priv) {
+		ret = -EBUSY;
+		goto probe_disable_device;
+	}
+	pci_set_drvdata(pdev, priv);
+
+	return ret;
+
+probe_disable_device:
+	pci_disable_device(pdev);
+probe_error:
+	return ret;
+}
+
+static struct pci_driver pch_uart_pci_driver = {
+	.name = "pch_uart",
+	.id_table = pch_uart_pci_id,
+	.probe = pch_uart_pci_probe,
+	.remove = __devexit_p(pch_uart_pci_remove),
+	.suspend = pch_uart_pci_suspend,
+	.resume = pch_uart_pci_resume,
+};
+
+static int __init pch_uart_module_init(void)
+{
+	int ret;
+
+	/* register as UART driver */
+	ret = uart_register_driver(&pch_uart_driver);
+	if (ret < 0)
+		return ret;
+
+	/* register as PCI driver */
+	ret = pci_register_driver(&pch_uart_pci_driver);
+	if (ret < 0)
+		uart_unregister_driver(&pch_uart_driver);
+
+	return ret;
+}
+module_init(pch_uart_module_init);
+
+static void __exit pch_uart_module_exit(void)
+{
+	pci_unregister_driver(&pch_uart_pci_driver);
+	uart_unregister_driver(&pch_uart_driver);
+}
+module_exit(pch_uart_module_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel EG20T PCH UART PCI Driver");
+module_param(default_baud, uint, S_IRUGO);
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index c4ea14670d4..460a72d91bb 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -29,7 +29,6 @@
 #include <linux/console.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/serial.h> /* for serial_state and serial_icounter_struct */
 #include <linux/serial_core.h>
@@ -1986,7 +1985,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
-		enable_irq_wake(uport->irq);
+		if (!enable_irq_wake(uport->irq))
+			uport->irq_wake = 1;
 		put_device(tty_dev);
 		mutex_unlock(&port->mutex);
 		return 0;
@@ -2052,7 +2052,10 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 
 	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (!uport->suspended && device_may_wakeup(tty_dev)) {
-		disable_irq_wake(uport->irq);
+		if (uport->irq_wake) {
+			disable_irq_wake(uport->irq);
+			uport->irq_wake = 0;
+		}
 		mutex_unlock(&port->mutex);
 		return 0;
 	}
@@ -2135,6 +2138,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
 	case UPIO_AU:
 	case UPIO_TSI:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		snprintf(address, sizeof(address),
 			 "MMIO 0x%llx", (unsigned long long)port->mapbase);
 		break;
@@ -2555,6 +2559,7 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2)
 	case UPIO_AU:
 	case UPIO_TSI:
 	case UPIO_DWAPB:
+	case UPIO_DWAPB32:
 		return (port1->mapbase == port2->mapbase);
 	}
 	return 0;
diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h
index d2352ac437c..4bc614e4221 100644
--- a/drivers/serial/sh-sci.h
+++ b/drivers/serial/sh-sci.h
@@ -31,6 +31,7 @@
 # define SCSCR_INIT(port) (port->mapbase == SCIF2) ? 0xF3 : 0xF0
 #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SH73A0) || \
       defined(CONFIG_ARCH_SH7367) || \
       defined(CONFIG_ARCH_SH7377) || \
       defined(CONFIG_ARCH_SH7372)
@@ -244,6 +245,7 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SH73A0) || \
     defined(CONFIG_ARCH_SH7367) || \
     defined(CONFIG_ARCH_SH7377) || \
     defined(CONFIG_ARCH_SH7372)
@@ -280,6 +282,7 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SH73A0) || \
     defined(CONFIG_ARCH_SH7367) || \
     defined(CONFIG_ARCH_SH7377) || \
     defined(CONFIG_ARCH_SH7372)
@@ -378,6 +381,7 @@
   }
 
 #if defined(CONFIG_CPU_SH3) || \
+    defined(CONFIG_ARCH_SH73A0) || \
     defined(CONFIG_ARCH_SH7367) || \
     defined(CONFIG_ARCH_SH7377) || \
     defined(CONFIG_ARCH_SH7372)
@@ -391,6 +395,7 @@
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SH73A0) || \
       defined(CONFIG_ARCH_SH7367) || \
       defined(CONFIG_ARCH_SH7377)
 #define SCIF_FNS(name, scif_offset, scif_size) \
@@ -433,6 +438,7 @@
 #if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
     defined(CONFIG_CPU_SUBTYPE_SH7720) || \
     defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+    defined(CONFIG_ARCH_SH73A0) || \
     defined(CONFIG_ARCH_SH7367) || \
     defined(CONFIG_ARCH_SH7377)
 
@@ -632,6 +638,7 @@ static inline int sci_rxd_in(struct uart_port *port)
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
       defined(CONFIG_CPU_SUBTYPE_SH7720) || \
       defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+      defined(CONFIG_ARCH_SH73A0) || \
       defined(CONFIG_ARCH_SH7367) || \
       defined(CONFIG_ARCH_SH7377) || \
       defined(CONFIG_ARCH_SH7372)
diff --git a/drivers/serial/vt8500_serial.c b/drivers/serial/vt8500_serial.c
new file mode 100644
index 00000000000..322bf56c0d8
--- /dev/null
+++ b/drivers/serial/vt8500_serial.c
@@ -0,0 +1,648 @@
+/*
+ * drivers/serial/vt8500_serial.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on msm_serial.c, which is:
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Robert Love <rlove@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+# define SUPPORT_SYSRQ
+#endif
+
+#include <linux/hrtimer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+/*
+ * UART Register offsets
+ */
+
+#define VT8500_URTDR		0x0000	/* Transmit data */
+#define VT8500_URRDR		0x0004	/* Receive data */
+#define VT8500_URDIV		0x0008	/* Clock/Baud rate divisor */
+#define VT8500_URLCR		0x000C	/* Line control */
+#define VT8500_URICR		0x0010	/* IrDA control */
+#define VT8500_URIER		0x0014	/* Interrupt enable */
+#define VT8500_URISR		0x0018	/* Interrupt status */
+#define VT8500_URUSR		0x001c	/* UART status */
+#define VT8500_URFCR		0x0020	/* FIFO control */
+#define VT8500_URFIDX		0x0024	/* FIFO index */
+#define VT8500_URBKR		0x0028	/* Break signal count */
+#define VT8500_URTOD		0x002c	/* Time out divisor */
+#define VT8500_TXFIFO		0x1000	/* Transmit FIFO (16x8) */
+#define VT8500_RXFIFO		0x1020	/* Receive FIFO (16x10) */
+
+/*
+ * Interrupt enable and status bits
+ */
+
+#define TXDE	(1 << 0)	/* Tx Data empty */
+#define RXDF	(1 << 1)	/* Rx Data full */
+#define TXFAE	(1 << 2)	/* Tx FIFO almost empty */
+#define TXFE	(1 << 3)	/* Tx FIFO empty */
+#define RXFAF	(1 << 4)	/* Rx FIFO almost full */
+#define RXFF	(1 << 5)	/* Rx FIFO full */
+#define TXUDR	(1 << 6)	/* Tx underrun */
+#define RXOVER	(1 << 7)	/* Rx overrun */
+#define PER	(1 << 8)	/* Parity error */
+#define FER	(1 << 9)	/* Frame error */
+#define TCTS	(1 << 10)	/* Toggle of CTS */
+#define RXTOUT	(1 << 11)	/* Rx timeout */
+#define BKDONE	(1 << 12)	/* Break signal done */
+#define ERR	(1 << 13)	/* AHB error response */
+
+#define RX_FIFO_INTS	(RXFAF | RXFF | RXOVER | PER | FER | RXTOUT)
+#define TX_FIFO_INTS	(TXFAE | TXFE | TXUDR)
+
+struct vt8500_port {
+	struct uart_port	uart;
+	char			name[16];
+	struct clk		*clk;
+	unsigned int		ier;
+};
+
+static inline void vt8500_write(struct uart_port *port, unsigned int val,
+			     unsigned int off)
+{
+	writel(val, port->membase + off);
+}
+
+static inline unsigned int vt8500_read(struct uart_port *port, unsigned int off)
+{
+	return readl(port->membase + off);
+}
+
+static void vt8500_stop_tx(struct uart_port *port)
+{
+	struct vt8500_port *vt8500_port = container_of(port,
+						       struct vt8500_port,
+						       uart);
+
+	vt8500_port->ier &= ~TX_FIFO_INTS;
+	vt8500_write(port, vt8500_port->ier, VT8500_URIER);
+}
+
+static void vt8500_stop_rx(struct uart_port *port)
+{
+	struct vt8500_port *vt8500_port = container_of(port,
+						       struct vt8500_port,
+						       uart);
+
+	vt8500_port->ier &= ~RX_FIFO_INTS;
+	vt8500_write(port, vt8500_port->ier, VT8500_URIER);
+}
+
+static void vt8500_enable_ms(struct uart_port *port)
+{
+	struct vt8500_port *vt8500_port = container_of(port,
+						       struct vt8500_port,
+						       uart);
+
+	vt8500_port->ier |= TCTS;
+	vt8500_write(port, vt8500_port->ier, VT8500_URIER);
+}
+
+static void handle_rx(struct uart_port *port)
+{
+	struct tty_struct *tty = tty_port_tty_get(&port->state->port);
+	if (!tty) {
+		/* Discard data: no tty available */
+		int count = (vt8500_read(port, VT8500_URFIDX) & 0x1f00) >> 8;
+		u16 ch;
+		while (count--)
+			ch = readw(port->membase + VT8500_RXFIFO);
+		return;
+	}
+
+	/*
+	 * Handle overrun
+	 */
+	if ((vt8500_read(port, VT8500_URISR) & RXOVER)) {
+		port->icount.overrun++;
+		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+	}
+
+	/* and now the main RX loop */
+	while (vt8500_read(port, VT8500_URFIDX) & 0x1f00) {
+		unsigned int c;
+		char flag = TTY_NORMAL;
+
+		c = readw(port->membase + VT8500_RXFIFO) & 0x3ff;
+
+		/* Mask conditions we're ignorning. */
+		c &= ~port->read_status_mask;
+
+		if (c & FER) {
+			port->icount.frame++;
+			flag = TTY_FRAME;
+		} else if (c & PER) {
+			port->icount.parity++;
+			flag = TTY_PARITY;
+		}
+		port->icount.rx++;
+
+		if (!uart_handle_sysrq_char(port, c))
+			tty_insert_flip_char(tty, c, flag);
+	}
+
+	tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
+
+static void handle_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit = &port->state->xmit;
+
+	if (port->x_char) {
+		writeb(port->x_char, port->membase + VT8500_TXFIFO);
+		port->icount.tx++;
+		port->x_char = 0;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+		vt8500_stop_tx(port);
+		return;
+	}
+
+	while ((vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16) {
+		if (uart_circ_empty(xmit))
+			break;
+
+		writeb(xmit->buf[xmit->tail], port->membase + VT8500_TXFIFO);
+
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		vt8500_stop_tx(port);
+}
+
+static void vt8500_start_tx(struct uart_port *port)
+{
+	struct vt8500_port *vt8500_port = container_of(port,
+						       struct vt8500_port,
+						       uart);
+
+	vt8500_port->ier &= ~TX_FIFO_INTS;
+	vt8500_write(port, vt8500_port->ier, VT8500_URIER);
+	handle_tx(port);
+	vt8500_port->ier |= TX_FIFO_INTS;
+	vt8500_write(port, vt8500_port->ier, VT8500_URIER);
+}
+
+static void handle_delta_cts(struct uart_port *port)
+{
+	port->icount.cts++;
+	wake_up_interruptible(&port->state->port.delta_msr_wait);
+}
+
+static irqreturn_t vt8500_irq(int irq, void *dev_id)
+{
+	struct uart_port *port = dev_id;
+	unsigned long isr;
+
+	spin_lock(&port->lock);
+	isr = vt8500_read(port, VT8500_URISR);
+
+	/* Acknowledge active status bits */
+	vt8500_write(port, isr, VT8500_URISR);
+
+	if (isr & RX_FIFO_INTS)
+		handle_rx(port);
+	if (isr & TX_FIFO_INTS)
+		handle_tx(port);
+	if (isr & TCTS)
+		handle_delta_cts(port);
+
+	spin_unlock(&port->lock);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int vt8500_tx_empty(struct uart_port *port)
+{
+	return (vt8500_read(port, VT8500_URFIDX) & 0x1f) < 16 ?
+						TIOCSER_TEMT : 0;
+}
+
+static unsigned int vt8500_get_mctrl(struct uart_port *port)
+{
+	unsigned int usr;
+
+	usr = vt8500_read(port, VT8500_URUSR);
+	if (usr & (1 << 4))
+		return TIOCM_CTS;
+	else
+		return 0;
+}
+
+static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+static void vt8500_break_ctl(struct uart_port *port, int break_ctl)
+{
+	if (break_ctl)
+		vt8500_write(port, vt8500_read(port, VT8500_URLCR) | (1 << 9),
+			     VT8500_URLCR);
+}
+
+static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud)
+{
+	unsigned long div;
+	unsigned int loops = 1000;
+
+	div = vt8500_read(port, VT8500_URDIV) & ~(0x3ff);
+
+	if (unlikely((baud < 900) || (baud > 921600)))
+		div |= 7;
+	else
+		div |= (921600 / baud) - 1;
+
+	while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops)
+		cpu_relax();
+	vt8500_write(port, div, VT8500_URDIV);
+
+	return baud;
+}
+
+static int vt8500_startup(struct uart_port *port)
+{
+	struct vt8500_port *vt8500_port =
+			container_of(port, struct vt8500_port, uart);
+	int ret;
+
+	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
+		 "vt8500_serial%d", port->line);
+
+	ret = request_irq(port->irq, vt8500_irq, IRQF_TRIGGER_HIGH,
+			  vt8500_port->name, port);
+	if (unlikely(ret))
+		return ret;
+
+	vt8500_write(port, 0x03, VT8500_URLCR);	/* enable TX & RX */
+
+	return 0;
+}
+
+static void vt8500_shutdown(struct uart_port *port)
+{
+	struct vt8500_port *vt8500_port =
+			container_of(port, struct vt8500_port, uart);
+
+	vt8500_port->ier = 0;
+
+	/* disable interrupts and FIFOs */
+	vt8500_write(&vt8500_port->uart, 0, VT8500_URIER);
+	vt8500_write(&vt8500_port->uart, 0x880, VT8500_URFCR);
+	free_irq(port->irq, port);
+}
+
+static void vt8500_set_termios(struct uart_port *port,
+			       struct ktermios *termios,
+			       struct ktermios *old)
+{
+	struct vt8500_port *vt8500_port =
+			container_of(port, struct vt8500_port, uart);
+	unsigned long flags;
+	unsigned int baud, lcr;
+	unsigned int loops = 1000;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* calculate and set baud rate */
+	baud = uart_get_baud_rate(port, termios, old, 900, 921600);
+	baud = vt8500_set_baud_rate(port, baud);
+	if (tty_termios_baud_rate(termios))
+		tty_termios_encode_baud_rate(termios, baud, baud);
+
+	/* calculate parity */
+	lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR);
+	lcr &= ~((1 << 5) | (1 << 4));
+	if (termios->c_cflag & PARENB) {
+		lcr |= (1 << 4);
+		termios->c_cflag &= ~CMSPAR;
+		if (termios->c_cflag & PARODD)
+			lcr |= (1 << 5);
+	}
+
+	/* calculate bits per char */
+	lcr &= ~(1 << 2);
+	switch (termios->c_cflag & CSIZE) {
+	case CS7:
+		break;
+	case CS8:
+	default:
+		lcr |= (1 << 2);
+		termios->c_cflag &= ~CSIZE;
+		termios->c_cflag |= CS8;
+		break;
+	}
+
+	/* calculate stop bits */
+	lcr &= ~(1 << 3);
+	if (termios->c_cflag & CSTOPB)
+		lcr |= (1 << 3);
+
+	/* set parity, bits per char, and stop bit */
+	vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR);
+
+	/* Configure status bits to ignore based on termio flags. */
+	port->read_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		port->read_status_mask = FER | PER;
+
+	uart_update_timeout(port, termios->c_cflag, baud);
+
+	/* Reset FIFOs */
+	vt8500_write(&vt8500_port->uart, 0x88c, VT8500_URFCR);
+	while ((vt8500_read(&vt8500_port->uart, VT8500_URFCR) & 0xc)
+							&& --loops)
+		cpu_relax();
+
+	/* Every possible FIFO-related interrupt */
+	vt8500_port->ier = RX_FIFO_INTS | TX_FIFO_INTS;
+
+	/*
+	 * CTS flow control
+	 */
+	if (UART_ENABLE_MS(&vt8500_port->uart, termios->c_cflag))
+		vt8500_port->ier |= TCTS;
+
+	vt8500_write(&vt8500_port->uart, 0x881, VT8500_URFCR);
+	vt8500_write(&vt8500_port->uart, vt8500_port->ier, VT8500_URIER);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static const char *vt8500_type(struct uart_port *port)
+{
+	struct vt8500_port *vt8500_port =
+			container_of(port, struct vt8500_port, uart);
+	return vt8500_port->name;
+}
+
+static void vt8500_release_port(struct uart_port *port)
+{
+}
+
+static int vt8500_request_port(struct uart_port *port)
+{
+	return 0;
+}
+
+static void vt8500_config_port(struct uart_port *port, int flags)
+{
+	port->type = PORT_VT8500;
+}
+
+static int vt8500_verify_port(struct uart_port *port,
+			      struct serial_struct *ser)
+{
+	if (unlikely(ser->type != PORT_UNKNOWN && ser->type != PORT_VT8500))
+		return -EINVAL;
+	if (unlikely(port->irq != ser->irq))
+		return -EINVAL;
+	return 0;
+}
+
+static struct vt8500_port *vt8500_uart_ports[4];
+static struct uart_driver vt8500_uart_driver;
+
+#ifdef CONFIG_SERIAL_VT8500_CONSOLE
+
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+	unsigned int status, tmout = 10000;
+
+	/* Wait up to 10ms for the character(s) to be sent. */
+	do {
+		status = vt8500_read(port, VT8500_URFIDX);
+
+		if (--tmout == 0)
+			break;
+		udelay(1);
+	} while (status & 0x10);
+}
+
+static void vt8500_console_putchar(struct uart_port *port, int c)
+{
+	wait_for_xmitr(port);
+	writeb(c, port->membase + VT8500_TXFIFO);
+}
+
+static void vt8500_console_write(struct console *co, const char *s,
+			      unsigned int count)
+{
+	struct vt8500_port *vt8500_port = vt8500_uart_ports[co->index];
+	unsigned long ier;
+
+	BUG_ON(co->index < 0 || co->index >= vt8500_uart_driver.nr);
+
+	ier = vt8500_read(&vt8500_port->uart, VT8500_URIER);
+	vt8500_write(&vt8500_port->uart, VT8500_URIER, 0);
+
+	uart_console_write(&vt8500_port->uart, s, count,
+			   vt8500_console_putchar);
+
+	/*
+	 *	Finally, wait for transmitter to become empty
+	 *	and switch back to FIFO
+	 */
+	wait_for_xmitr(&vt8500_port->uart);
+	vt8500_write(&vt8500_port->uart, VT8500_URIER, ier);
+}
+
+static int __init vt8500_console_setup(struct console *co, char *options)
+{
+	struct vt8500_port *vt8500_port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (unlikely(co->index >= vt8500_uart_driver.nr || co->index < 0))
+		return -ENXIO;
+
+	vt8500_port = vt8500_uart_ports[co->index];
+
+	if (!vt8500_port)
+		return -ENODEV;
+
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(&vt8500_port->uart,
+				 co, baud, parity, bits, flow);
+}
+
+static struct console vt8500_console = {
+	.name = "ttyWMT",
+	.write = vt8500_console_write,
+	.device = uart_console_device,
+	.setup = vt8500_console_setup,
+	.flags = CON_PRINTBUFFER,
+	.index = -1,
+	.data = &vt8500_uart_driver,
+};
+
+#define VT8500_CONSOLE	(&vt8500_console)
+
+#else
+#define VT8500_CONSOLE	NULL
+#endif
+
+static struct uart_ops vt8500_uart_pops = {
+	.tx_empty	= vt8500_tx_empty,
+	.set_mctrl	= vt8500_set_mctrl,
+	.get_mctrl	= vt8500_get_mctrl,
+	.stop_tx	= vt8500_stop_tx,
+	.start_tx	= vt8500_start_tx,
+	.stop_rx	= vt8500_stop_rx,
+	.enable_ms	= vt8500_enable_ms,
+	.break_ctl	= vt8500_break_ctl,
+	.startup	= vt8500_startup,
+	.shutdown	= vt8500_shutdown,
+	.set_termios	= vt8500_set_termios,
+	.type		= vt8500_type,
+	.release_port	= vt8500_release_port,
+	.request_port	= vt8500_request_port,
+	.config_port	= vt8500_config_port,
+	.verify_port	= vt8500_verify_port,
+};
+
+static struct uart_driver vt8500_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "vt8500_serial",
+	.dev_name	= "ttyWMT",
+	.nr		= 6,
+	.cons		= VT8500_CONSOLE,
+};
+
+static int __init vt8500_serial_probe(struct platform_device *pdev)
+{
+	struct vt8500_port *vt8500_port;
+	struct resource *mmres, *irqres;
+	int ret;
+
+	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!mmres || !irqres)
+		return -ENODEV;
+
+	vt8500_port = kzalloc(sizeof(struct vt8500_port), GFP_KERNEL);
+	if (!vt8500_port)
+		return -ENOMEM;
+
+	vt8500_port->uart.type = PORT_VT8500;
+	vt8500_port->uart.iotype = UPIO_MEM;
+	vt8500_port->uart.mapbase = mmres->start;
+	vt8500_port->uart.irq = irqres->start;
+	vt8500_port->uart.fifosize = 16;
+	vt8500_port->uart.ops = &vt8500_uart_pops;
+	vt8500_port->uart.line = pdev->id;
+	vt8500_port->uart.dev = &pdev->dev;
+	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+	vt8500_port->uart.uartclk = 24000000;
+
+	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
+		 "VT8500 UART%d", pdev->id);
+
+	vt8500_port->uart.membase = ioremap(mmres->start,
+					    mmres->end - mmres->start + 1);
+	if (!vt8500_port->uart.membase) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	vt8500_uart_ports[pdev->id] = vt8500_port;
+
+	uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);
+
+	platform_set_drvdata(pdev, vt8500_port);
+
+	return 0;
+
+err:
+	kfree(vt8500_port);
+	return ret;
+}
+
+static int __devexit vt8500_serial_remove(struct platform_device *pdev)
+{
+	struct vt8500_port *vt8500_port = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+	uart_remove_one_port(&vt8500_uart_driver, &vt8500_port->uart);
+	kfree(vt8500_port);
+
+	return 0;
+}
+
+static struct platform_driver vt8500_platform_driver = {
+	.probe  = vt8500_serial_probe,
+	.remove = vt8500_serial_remove,
+	.driver = {
+		.name = "vt8500_serial",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init vt8500_serial_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&vt8500_uart_driver);
+	if (unlikely(ret))
+		return ret;
+
+	ret = platform_driver_register(&vt8500_platform_driver);
+
+	if (unlikely(ret))
+		uart_unregister_driver(&vt8500_uart_driver);
+
+	return ret;
+}
+
+static void __exit vt8500_serial_exit(void)
+{
+#ifdef CONFIG_SERIAL_VT8500_CONSOLE
+	unregister_console(&vt8500_console);
+#endif
+	platform_driver_unregister(&vt8500_platform_driver);
+	uart_unregister_driver(&vt8500_uart_driver);
+}
+
+module_init(vt8500_serial_init);
+module_exit(vt8500_serial_exit);
+
+MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com>");
+MODULE_DESCRIPTION("Driver for vt8500 serial device");
+MODULE_LICENSE("GPL");
diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c
index 09615b51d59..3f5e387ed56 100644
--- a/drivers/sh/clk/core.c
+++ b/drivers/sh/clk/core.c
@@ -418,8 +418,11 @@ int clk_register(struct clk *clk)
 		list_add(&clk->sibling, &root_clks);
 
 	list_add(&clk->node, &clock_list);
+
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
 	if (clk->ops && clk->ops->init)
 		clk->ops->init(clk);
+#endif
 
 out_unlock:
 	mutex_unlock(&clock_list_sem);
@@ -455,19 +458,13 @@ EXPORT_SYMBOL_GPL(clk_get_rate);
 
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
-	return clk_set_rate_ex(clk, rate, 0);
-}
-EXPORT_SYMBOL_GPL(clk_set_rate);
-
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id)
-{
 	int ret = -EOPNOTSUPP;
 	unsigned long flags;
 
 	spin_lock_irqsave(&clock_lock, flags);
 
 	if (likely(clk->ops && clk->ops->set_rate)) {
-		ret = clk->ops->set_rate(clk, rate, algo_id);
+		ret = clk->ops->set_rate(clk, rate);
 		if (ret != 0)
 			goto out_unlock;
 	} else {
@@ -485,7 +482,7 @@ out_unlock:
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(clk_set_rate_ex);
+EXPORT_SYMBOL_GPL(clk_set_rate);
 
 int clk_set_parent(struct clk *clk, struct clk *parent)
 {
@@ -571,7 +568,7 @@ long clk_round_parent(struct clk *clk, unsigned long target,
 					*best_freq = freq_max;
 			}
 
-			pr_debug("too low freq %lu, error %lu\n", freq->frequency,
+			pr_debug("too low freq %u, error %lu\n", freq->frequency,
 				 target - freq_max);
 
 			if (!error)
@@ -591,7 +588,7 @@ long clk_round_parent(struct clk *clk, unsigned long target,
 					*best_freq = freq_min;
 			}
 
-			pr_debug("too high freq %lu, error %lu\n", freq->frequency,
+			pr_debug("too high freq %u, error %lu\n", freq->frequency,
 				 freq_min - target);
 
 			if (!error)
@@ -653,8 +650,7 @@ static int clks_sysdev_suspend(struct sys_device *dev, pm_message_t state)
 					clkp->ops->set_parent(clkp,
 						clkp->parent);
 				if (likely(clkp->ops->set_rate))
-					clkp->ops->set_rate(clkp,
-						rate, NO_CHANGE);
+					clkp->ops->set_rate(clkp, rate);
 				else if (likely(clkp->ops->recalc))
 					clkp->rate = clkp->ops->recalc(clkp);
 			}
diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 3aea5f0ceb0..6172335ae32 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -110,8 +110,7 @@ static int sh_clk_div6_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
-static int sh_clk_div6_set_rate(struct clk *clk,
-				unsigned long rate, int algo_id)
+static int sh_clk_div6_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long value;
 	int idx;
@@ -132,7 +131,7 @@ static int sh_clk_div6_enable(struct clk *clk)
 	unsigned long value;
 	int ret;
 
-	ret = sh_clk_div6_set_rate(clk, clk->rate, 0);
+	ret = sh_clk_div6_set_rate(clk, clk->rate);
 	if (ret == 0) {
 		value = __raw_readl(clk->enable_reg);
 		value &= ~0x100; /* clear stop bit to enable clock */
@@ -253,7 +252,7 @@ static int sh_clk_div4_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
-static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate, int algo_id)
+static int sh_clk_div4_set_rate(struct clk *clk, unsigned long rate)
 {
 	struct clk_div4_table *d4t = clk->priv;
 	unsigned long value;
diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c
index e5e9e6735f7..9739431092d 100644
--- a/drivers/sh/intc/core.c
+++ b/drivers/sh/intc/core.c
@@ -198,6 +198,7 @@ int __init register_intc_controller(struct intc_desc *desc)
 	list_add_tail(&d->list, &intc_list);
 
 	raw_spin_lock_init(&d->lock);
+	INIT_RADIX_TREE(&d->tree, GFP_ATOMIC);
 
 	d->index = nr_intc_controllers;
 
diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c
index e5bf5d3c698..4e0ff718116 100644
--- a/drivers/sh/intc/virq.c
+++ b/drivers/sh/intc/virq.c
@@ -215,7 +215,7 @@ restart:
 		entry = radix_tree_deref_slot((void **)entries[i]);
 		if (unlikely(!entry))
 			continue;
-		if (unlikely(entry == RADIX_TREE_RETRY))
+		if (radix_tree_deref_retry(entry))
 			goto restart;
 
 		irq = create_irq();
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 78f9fd02c1b..1906840c111 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -111,11 +111,14 @@ config SPI_COLDFIRE_QSPI
 	  will be called coldfire_qspi.
 
 config SPI_DAVINCI
-	tristate "SPI controller driver for DaVinci/DA8xx SoC's"
+	tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
 	depends on SPI_MASTER && ARCH_DAVINCI
 	select SPI_BITBANG
 	help
-	  SPI master controller for DaVinci and DA8xx SPI modules.
+	  SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
+
+	  This driver can also be built as a module. The module will be called
+	  davinci_spi.
 
 config SPI_EP93XX
 	tristate "Cirrus Logic EP93xx SPI controller"
@@ -267,12 +270,15 @@ config SPI_PPC4xx
 
 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
-	depends on ARCH_PXA && EXPERIMENTAL
-	select PXA_SSP
+	depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL
+	select PXA_SSP if ARCH_PXA
 	help
-	  This enables using a PXA2xx SSP port as a SPI master controller.
-	  The driver can be configured to use any SSP port and additional
-	  documentation can be found a Documentation/spi/pxa2xx.
+	  This enables using a PXA2xx or Sodaville SSP port as a SPI master
+	  controller. The driver can be configured to use any SSP port and
+	  additional documentation can be found a Documentation/spi/pxa2xx.
+
+config SPI_PXA2XX_PCI
+	def_bool SPI_PXA2XX && X86_32 && PCI
 
 config SPI_S3C24XX
 	tristate "Samsung S3C24XX series SPI"
@@ -353,7 +359,6 @@ config SPI_XILINX
 	tristate "Xilinx SPI controller common module"
 	depends on HAS_IOMEM && EXPERIMENTAL
 	select SPI_BITBANG
-	select SPI_XILINX_OF if (XILINX_VIRTEX || MICROBLAZE)
 	help
 	  This exposes the SPI controller IP from the Xilinx EDK.
 
@@ -362,19 +367,6 @@ config SPI_XILINX
 
 	  Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
 
-config SPI_XILINX_OF
-	tristate "Xilinx SPI controller OF device"
-	depends on SPI_XILINX && (XILINX_VIRTEX || MICROBLAZE)
-	help
-	  This is the OF driver for the SPI controller IP from the Xilinx EDK.
-
-config SPI_XILINX_PLTFM
-	tristate "Xilinx SPI controller platform device"
-	depends on SPI_XILINX
-	help
-	  This is the platform driver for the SPI controller IP
-	  from the Xilinx EDK.
-
 config SPI_NUC900
 	tristate "Nuvoton NUC900 series SPI"
 	depends on ARCH_W90X900 && EXPERIMENTAL
@@ -396,6 +388,10 @@ config SPI_DW_PCI
 	tristate "PCI interface driver for DW SPI core"
 	depends on SPI_DESIGNWARE && PCI
 
+config SPI_DW_MID_DMA
+	bool "DMA support for DW SPI controller on Intel Moorestown platform"
+	depends on SPI_DW_PCI && INTEL_MID_DMAC
+
 config SPI_DW_MMIO
 	tristate "Memory-mapped io interface driver for DW SPI core"
 	depends on SPI_DESIGNWARE && HAVE_CLK
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 8bc1a5abac1..3a42463c92a 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -17,13 +17,15 @@ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
 obj-$(CONFIG_SPI_COLDFIRE_QSPI)		+= coldfire_qspi.o
 obj-$(CONFIG_SPI_DAVINCI)		+= davinci_spi.o
 obj-$(CONFIG_SPI_DESIGNWARE)		+= dw_spi.o
-obj-$(CONFIG_SPI_DW_PCI)		+= dw_spi_pci.o
+obj-$(CONFIG_SPI_DW_PCI)		+= dw_spi_midpci.o
+dw_spi_midpci-objs			:= dw_spi_pci.o dw_spi_mid.o
 obj-$(CONFIG_SPI_DW_MMIO)		+= dw_spi_mmio.o
 obj-$(CONFIG_SPI_EP93XX)		+= ep93xx_spi.o
 obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
 obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
 obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
+obj-$(CONFIG_SPI_PXA2XX_PCI)		+= pxa2xx_spi_pci.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
 obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
 obj-$(CONFIG_SPI_OMAP_100K)		+= omap_spi_100k.o
@@ -43,8 +45,6 @@ obj-$(CONFIG_SPI_TEGRA)			+= spi_tegra.o
 obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi_topcliff_pch.o
 obj-$(CONFIG_SPI_TXX9)			+= spi_txx9.o
 obj-$(CONFIG_SPI_XILINX)		+= xilinx_spi.o
-obj-$(CONFIG_SPI_XILINX_OF)		+= xilinx_spi_of.o
-obj-$(CONFIG_SPI_XILINX_PLTFM)		+= xilinx_spi_pltfm.o
 obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
 obj-$(CONFIG_SPI_SH_MSIOF)		+= spi_sh_msiof.o
 obj-$(CONFIG_SPI_STMP3XXX)		+= spi_stmp.o
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index fb3d1b31772..a2a5921c730 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -253,11 +253,6 @@
 #define STATE_ERROR			((void *) -1)
 
 /*
- * Queue State
- */
-#define QUEUE_RUNNING			(0)
-#define QUEUE_STOPPED			(1)
-/*
  * SSP State - Whether Enabled or Disabled
  */
 #define SSP_DISABLED			(0)
@@ -344,7 +339,7 @@ struct vendor_data {
  * @lock: spinlock to syncronise access to driver data
  * @workqueue: a workqueue on which any spi_message request is queued
  * @busy: workqueue is busy
- * @run: workqueue is running
+ * @running: workqueue is running
  * @pump_transfers: Tasklet used in Interrupt Transfer mode
  * @cur_msg: Pointer to current spi_message being processed
  * @cur_transfer: Pointer to current spi_transfer
@@ -369,8 +364,8 @@ struct pl022 {
 	struct work_struct		pump_messages;
 	spinlock_t			queue_lock;
 	struct list_head		queue;
-	int				busy;
-	int				run;
+	bool				busy;
+	bool				running;
 	/* Message transfer pump */
 	struct tasklet_struct		pump_transfers;
 	struct spi_message		*cur_msg;
@@ -782,9 +777,9 @@ static void *next_transfer(struct pl022 *pl022)
 static void unmap_free_dma_scatter(struct pl022 *pl022)
 {
 	/* Unmap and free the SG tables */
-	dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl,
+	dma_unmap_sg(pl022->dma_tx_channel->device->dev, pl022->sgt_tx.sgl,
 		     pl022->sgt_tx.nents, DMA_TO_DEVICE);
-	dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl,
+	dma_unmap_sg(pl022->dma_rx_channel->device->dev, pl022->sgt_rx.sgl,
 		     pl022->sgt_rx.nents, DMA_FROM_DEVICE);
 	sg_free_table(&pl022->sgt_rx);
 	sg_free_table(&pl022->sgt_tx);
@@ -917,7 +912,7 @@ static int configure_dma(struct pl022 *pl022)
 	};
 	unsigned int pages;
 	int ret;
-	int sglen;
+	int rx_sglen, tx_sglen;
 	struct dma_chan *rxchan = pl022->dma_rx_channel;
 	struct dma_chan *txchan = pl022->dma_tx_channel;
 	struct dma_async_tx_descriptor *rxdesc;
@@ -956,7 +951,7 @@ static int configure_dma(struct pl022 *pl022)
 		tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 		break;
 	case WRITING_U32:
-		tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;;
+		tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 		break;
 	}
 
@@ -991,20 +986,20 @@ static int configure_dma(struct pl022 *pl022)
 			  pl022->cur_transfer->len, &pl022->sgt_tx);
 
 	/* Map DMA buffers */
-	sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_rx.sgl,
+	rx_sglen = dma_map_sg(rxchan->device->dev, pl022->sgt_rx.sgl,
 			   pl022->sgt_rx.nents, DMA_FROM_DEVICE);
-	if (!sglen)
+	if (!rx_sglen)
 		goto err_rx_sgmap;
 
-	sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_tx.sgl,
+	tx_sglen = dma_map_sg(txchan->device->dev, pl022->sgt_tx.sgl,
 			   pl022->sgt_tx.nents, DMA_TO_DEVICE);
-	if (!sglen)
+	if (!tx_sglen)
 		goto err_tx_sgmap;
 
 	/* Send both scatterlists */
 	rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
 				      pl022->sgt_rx.sgl,
-				      pl022->sgt_rx.nents,
+				      rx_sglen,
 				      DMA_FROM_DEVICE,
 				      DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!rxdesc)
@@ -1012,7 +1007,7 @@ static int configure_dma(struct pl022 *pl022)
 
 	txdesc = txchan->device->device_prep_slave_sg(txchan,
 				      pl022->sgt_tx.sgl,
-				      pl022->sgt_tx.nents,
+				      tx_sglen,
 				      DMA_TO_DEVICE,
 				      DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!txdesc)
@@ -1040,10 +1035,10 @@ err_txdesc:
 	txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0);
 err_rxdesc:
 	rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0);
-	dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl,
+	dma_unmap_sg(txchan->device->dev, pl022->sgt_tx.sgl,
 		     pl022->sgt_tx.nents, DMA_TO_DEVICE);
 err_tx_sgmap:
-	dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl,
+	dma_unmap_sg(rxchan->device->dev, pl022->sgt_rx.sgl,
 		     pl022->sgt_tx.nents, DMA_FROM_DEVICE);
 err_rx_sgmap:
 	sg_free_table(&pl022->sgt_tx);
@@ -1460,8 +1455,8 @@ static void pump_messages(struct work_struct *work)
 
 	/* Lock queue and check for queue work */
 	spin_lock_irqsave(&pl022->queue_lock, flags);
-	if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) {
-		pl022->busy = 0;
+	if (list_empty(&pl022->queue) || !pl022->running) {
+		pl022->busy = false;
 		spin_unlock_irqrestore(&pl022->queue_lock, flags);
 		return;
 	}
@@ -1475,7 +1470,7 @@ static void pump_messages(struct work_struct *work)
 	    list_entry(pl022->queue.next, struct spi_message, queue);
 
 	list_del_init(&pl022->cur_msg->queue);
-	pl022->busy = 1;
+	pl022->busy = true;
 	spin_unlock_irqrestore(&pl022->queue_lock, flags);
 
 	/* Initial message state */
@@ -1507,8 +1502,8 @@ static int __init init_queue(struct pl022 *pl022)
 	INIT_LIST_HEAD(&pl022->queue);
 	spin_lock_init(&pl022->queue_lock);
 
-	pl022->run = QUEUE_STOPPED;
-	pl022->busy = 0;
+	pl022->running = false;
+	pl022->busy = false;
 
 	tasklet_init(&pl022->pump_transfers,
 			pump_transfers,	(unsigned long)pl022);
@@ -1529,12 +1524,12 @@ static int start_queue(struct pl022 *pl022)
 
 	spin_lock_irqsave(&pl022->queue_lock, flags);
 
-	if (pl022->run == QUEUE_RUNNING || pl022->busy) {
+	if (pl022->running || pl022->busy) {
 		spin_unlock_irqrestore(&pl022->queue_lock, flags);
 		return -EBUSY;
 	}
 
-	pl022->run = QUEUE_RUNNING;
+	pl022->running = true;
 	pl022->cur_msg = NULL;
 	pl022->cur_transfer = NULL;
 	pl022->cur_chip = NULL;
@@ -1566,7 +1561,8 @@ static int stop_queue(struct pl022 *pl022)
 
 	if (!list_empty(&pl022->queue) || pl022->busy)
 		status = -EBUSY;
-	else pl022->run = QUEUE_STOPPED;
+	else
+		pl022->running = false;
 
 	spin_unlock_irqrestore(&pl022->queue_lock, flags);
 
@@ -1684,7 +1680,7 @@ static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
 
 	spin_lock_irqsave(&pl022->queue_lock, flags);
 
-	if (pl022->run == QUEUE_STOPPED) {
+	if (!pl022->running) {
 		spin_unlock_irqrestore(&pl022->queue_lock, flags);
 		return -ESHUTDOWN;
 	}
@@ -1693,7 +1689,7 @@ static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
 	msg->state = STATE_START;
 
 	list_add_tail(&msg->queue, &pl022->queue);
-	if (pl022->run == QUEUE_RUNNING && !pl022->busy)
+	if (pl022->running && !pl022->busy)
 		queue_work(pl022->workqueue, &pl022->pump_messages);
 
 	spin_unlock_irqrestore(&pl022->queue_lock, flags);
diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 154529aacc0..a067046c9da 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -352,8 +352,12 @@ atmel_spi_dma_map_xfer(struct atmel_spi *as, struct spi_transfer *xfer)
 
 	xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
 	if (xfer->tx_buf) {
+		/* tx_buf is a const void* where we need a void * for the dma
+		 * mapping */
+		void *nonconst_tx = (void *)xfer->tx_buf;
+
 		xfer->tx_dma = dma_map_single(dev,
-				(void *) xfer->tx_buf, xfer->len,
+				nonconst_tx, xfer->len,
 				DMA_TO_DEVICE);
 		if (dma_mapping_error(dev, xfer->tx_dma))
 			return -ENOMEM;
diff --git a/drivers/spi/coldfire_qspi.c b/drivers/spi/coldfire_qspi.c
index 052b3c7fa6a..8856bcca9d2 100644
--- a/drivers/spi/coldfire_qspi.c
+++ b/drivers/spi/coldfire_qspi.c
@@ -317,7 +317,7 @@ static void mcfqspi_work(struct work_struct *work)
 		msg = container_of(mcfqspi->msgq.next, struct spi_message,
 				   queue);
 
-		list_del_init(&mcfqspi->msgq);
+		list_del_init(&msg->queue);
 		spin_unlock_irqrestore(&mcfqspi->lock, flags);
 
 		spi = msg->spi;
diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c
index b85090caf7c..6beab99bf95 100644
--- a/drivers/spi/davinci_spi.c
+++ b/drivers/spi/davinci_spi.c
@@ -1,5 +1,6 @@
 /*
  * Copyright (C) 2009 Texas Instruments.
+ * Copyright (C) 2010 EF Johnson Technologies
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -38,11 +39,6 @@
 
 #define CS_DEFAULT	0xFF
 
-#define SPI_BUFSIZ	(SMP_CACHE_BYTES + 1)
-#define DAVINCI_DMA_DATA_TYPE_S8	0x01
-#define DAVINCI_DMA_DATA_TYPE_S16	0x02
-#define DAVINCI_DMA_DATA_TYPE_S32	0x04
-
 #define SPIFMT_PHASE_MASK	BIT(16)
 #define SPIFMT_POLARITY_MASK	BIT(17)
 #define SPIFMT_DISTIMER_MASK	BIT(18)
@@ -52,34 +48,43 @@
 #define SPIFMT_ODD_PARITY_MASK	BIT(23)
 #define SPIFMT_WDELAY_MASK	0x3f000000u
 #define SPIFMT_WDELAY_SHIFT	24
-#define SPIFMT_CHARLEN_MASK	0x0000001Fu
-
-/* SPIGCR1 */
-#define SPIGCR1_SPIENA_MASK	0x01000000u
+#define SPIFMT_PRESCALE_SHIFT	8
 
 /* SPIPC0 */
 #define SPIPC0_DIFUN_MASK	BIT(11)		/* MISO */
 #define SPIPC0_DOFUN_MASK	BIT(10)		/* MOSI */
 #define SPIPC0_CLKFUN_MASK	BIT(9)		/* CLK */
 #define SPIPC0_SPIENA_MASK	BIT(8)		/* nREADY */
-#define SPIPC0_EN1FUN_MASK	BIT(1)
-#define SPIPC0_EN0FUN_MASK	BIT(0)
 
 #define SPIINT_MASKALL		0x0101035F
-#define SPI_INTLVL_1		0x000001FFu
-#define SPI_INTLVL_0		0x00000000u
+#define SPIINT_MASKINT		0x0000015F
+#define SPI_INTLVL_1		0x000001FF
+#define SPI_INTLVL_0		0x00000000
 
-/* SPIDAT1 */
-#define SPIDAT1_CSHOLD_SHIFT	28
-#define SPIDAT1_CSNR_SHIFT	16
+/* SPIDAT1 (upper 16 bit defines) */
+#define SPIDAT1_CSHOLD_MASK	BIT(12)
+
+/* SPIGCR1 */
 #define SPIGCR1_CLKMOD_MASK	BIT(1)
 #define SPIGCR1_MASTER_MASK     BIT(0)
+#define SPIGCR1_POWERDOWN_MASK	BIT(8)
 #define SPIGCR1_LOOPBACK_MASK	BIT(16)
+#define SPIGCR1_SPIENA_MASK	BIT(24)
 
 /* SPIBUF */
 #define SPIBUF_TXFULL_MASK	BIT(29)
 #define SPIBUF_RXEMPTY_MASK	BIT(31)
 
+/* SPIDELAY */
+#define SPIDELAY_C2TDELAY_SHIFT 24
+#define SPIDELAY_C2TDELAY_MASK  (0xFF << SPIDELAY_C2TDELAY_SHIFT)
+#define SPIDELAY_T2CDELAY_SHIFT 16
+#define SPIDELAY_T2CDELAY_MASK  (0xFF << SPIDELAY_T2CDELAY_SHIFT)
+#define SPIDELAY_T2EDELAY_SHIFT 8
+#define SPIDELAY_T2EDELAY_MASK  (0xFF << SPIDELAY_T2EDELAY_SHIFT)
+#define SPIDELAY_C2EDELAY_SHIFT 0
+#define SPIDELAY_C2EDELAY_MASK  0xFF
+
 /* Error Masks */
 #define SPIFLG_DLEN_ERR_MASK		BIT(0)
 #define SPIFLG_TIMEOUT_MASK		BIT(1)
@@ -87,29 +92,13 @@
 #define SPIFLG_DESYNC_MASK		BIT(3)
 #define SPIFLG_BITERR_MASK		BIT(4)
 #define SPIFLG_OVRRUN_MASK		BIT(6)
-#define SPIFLG_RX_INTR_MASK		BIT(8)
-#define SPIFLG_TX_INTR_MASK		BIT(9)
 #define SPIFLG_BUF_INIT_ACTIVE_MASK	BIT(24)
-#define SPIFLG_MASK			(SPIFLG_DLEN_ERR_MASK \
+#define SPIFLG_ERROR_MASK		(SPIFLG_DLEN_ERR_MASK \
 				| SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \
 				| SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \
-				| SPIFLG_OVRRUN_MASK | SPIFLG_RX_INTR_MASK \
-				| SPIFLG_TX_INTR_MASK \
-				| SPIFLG_BUF_INIT_ACTIVE_MASK)
-
-#define SPIINT_DLEN_ERR_INTR	BIT(0)
-#define SPIINT_TIMEOUT_INTR	BIT(1)
-#define SPIINT_PARERR_INTR	BIT(2)
-#define SPIINT_DESYNC_INTR	BIT(3)
-#define SPIINT_BITERR_INTR	BIT(4)
-#define SPIINT_OVRRUN_INTR	BIT(6)
-#define SPIINT_RX_INTR		BIT(8)
-#define SPIINT_TX_INTR		BIT(9)
-#define SPIINT_DMA_REQ_EN	BIT(16)
-#define SPIINT_ENABLE_HIGHZ	BIT(24)
+				| SPIFLG_OVRRUN_MASK)
 
-#define SPI_T2CDELAY_SHIFT	16
-#define SPI_C2TDELAY_SHIFT	24
+#define SPIINT_DMA_REQ_EN	BIT(16)
 
 /* SPI Controller registers */
 #define SPIGCR0		0x00
@@ -118,44 +107,18 @@
 #define SPILVL		0x0c
 #define SPIFLG		0x10
 #define SPIPC0		0x14
-#define SPIPC1		0x18
-#define SPIPC2		0x1c
-#define SPIPC3		0x20
-#define SPIPC4		0x24
-#define SPIPC5		0x28
-#define SPIPC6		0x2c
-#define SPIPC7		0x30
-#define SPIPC8		0x34
-#define SPIDAT0		0x38
 #define SPIDAT1		0x3c
 #define SPIBUF		0x40
-#define SPIEMU		0x44
 #define SPIDELAY	0x48
 #define SPIDEF		0x4c
 #define SPIFMT0		0x50
-#define SPIFMT1		0x54
-#define SPIFMT2		0x58
-#define SPIFMT3		0x5c
-#define TGINTVEC0	0x60
-#define TGINTVEC1	0x64
-
-struct davinci_spi_slave {
-	u32	cmd_to_write;
-	u32	clk_ctrl_to_write;
-	u32	bytes_per_word;
-	u8	active_cs;
-};
 
 /* We have 2 DMA channels per CS, one for RX and one for TX */
 struct davinci_spi_dma {
-	int			dma_tx_channel;
-	int			dma_rx_channel;
-	int			dma_tx_sync_dev;
-	int			dma_rx_sync_dev;
+	int			tx_channel;
+	int			rx_channel;
+	int			dummy_param_slot;
 	enum dma_event_q	eventq;
-
-	struct completion	dma_tx_completion;
-	struct completion	dma_rx_completion;
 };
 
 /* SPI Controller driver's private data. */
@@ -166,58 +129,63 @@ struct davinci_spi {
 	u8			version;
 	resource_size_t		pbase;
 	void __iomem		*base;
-	size_t			region_size;
 	u32			irq;
 	struct completion	done;
 
 	const void		*tx;
 	void			*rx;
-	u8			*tmp_buf;
-	int			count;
-	struct davinci_spi_dma	*dma_channels;
-	struct			davinci_spi_platform_data *pdata;
+#define SPI_TMP_BUFSZ	(SMP_CACHE_BYTES + 1)
+	u8			rx_tmp_buf[SPI_TMP_BUFSZ];
+	int			rcount;
+	int			wcount;
+	struct davinci_spi_dma	dma;
+	struct davinci_spi_platform_data *pdata;
 
 	void			(*get_rx)(u32 rx_data, struct davinci_spi *);
 	u32			(*get_tx)(struct davinci_spi *);
 
-	struct davinci_spi_slave slave[SPI_MAX_CHIPSELECT];
+	u8			bytes_per_word[SPI_MAX_CHIPSELECT];
 };
 
-static unsigned use_dma;
+static struct davinci_spi_config davinci_spi_default_cfg;
 
-static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi)
+static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *dspi)
 {
-	u8 *rx = davinci_spi->rx;
-
-	*rx++ = (u8)data;
-	davinci_spi->rx = rx;
+	if (dspi->rx) {
+		u8 *rx = dspi->rx;
+		*rx++ = (u8)data;
+		dspi->rx = rx;
+	}
 }
 
-static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi)
+static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *dspi)
 {
-	u16 *rx = davinci_spi->rx;
-
-	*rx++ = (u16)data;
-	davinci_spi->rx = rx;
+	if (dspi->rx) {
+		u16 *rx = dspi->rx;
+		*rx++ = (u16)data;
+		dspi->rx = rx;
+	}
 }
 
-static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi)
+static u32 davinci_spi_tx_buf_u8(struct davinci_spi *dspi)
 {
-	u32 data;
-	const u8 *tx = davinci_spi->tx;
-
-	data = *tx++;
-	davinci_spi->tx = tx;
+	u32 data = 0;
+	if (dspi->tx) {
+		const u8 *tx = dspi->tx;
+		data = *tx++;
+		dspi->tx = tx;
+	}
 	return data;
 }
 
-static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi)
+static u32 davinci_spi_tx_buf_u16(struct davinci_spi *dspi)
 {
-	u32 data;
-	const u16 *tx = davinci_spi->tx;
-
-	data = *tx++;
-	davinci_spi->tx = tx;
+	u32 data = 0;
+	if (dspi->tx) {
+		const u16 *tx = dspi->tx;
+		data = *tx++;
+		dspi->tx = tx;
+	}
 	return data;
 }
 
@@ -237,55 +205,67 @@ static inline void clear_io_bits(void __iomem *addr, u32 bits)
 	iowrite32(v, addr);
 }
 
-static inline void set_fmt_bits(void __iomem *addr, u32 bits, int cs_num)
-{
-	set_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits);
-}
-
-static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int cs_num)
-{
-	clear_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits);
-}
-
-static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable)
-{
-	struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master);
-
-	if (enable)
-		set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN);
-	else
-		clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN);
-}
-
 /*
  * Interface to control the chip select signal
  */
 static void davinci_spi_chipselect(struct spi_device *spi, int value)
 {
-	struct davinci_spi *davinci_spi;
+	struct davinci_spi *dspi;
 	struct davinci_spi_platform_data *pdata;
-	u32 data1_reg_val = 0;
+	u8 chip_sel = spi->chip_select;
+	u16 spidat1 = CS_DEFAULT;
+	bool gpio_chipsel = false;
 
-	davinci_spi = spi_master_get_devdata(spi->master);
-	pdata = davinci_spi->pdata;
+	dspi = spi_master_get_devdata(spi->master);
+	pdata = dspi->pdata;
+
+	if (pdata->chip_sel && chip_sel < pdata->num_chipselect &&
+				pdata->chip_sel[chip_sel] != SPI_INTERN_CS)
+		gpio_chipsel = true;
 
 	/*
 	 * Board specific chip select logic decides the polarity and cs
 	 * line for the controller
 	 */
-	if (value == BITBANG_CS_INACTIVE) {
-		set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT);
-
-		data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT;
-		iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+	if (gpio_chipsel) {
+		if (value == BITBANG_CS_ACTIVE)
+			gpio_set_value(pdata->chip_sel[chip_sel], 0);
+		else
+			gpio_set_value(pdata->chip_sel[chip_sel], 1);
+	} else {
+		if (value == BITBANG_CS_ACTIVE) {
+			spidat1 |= SPIDAT1_CSHOLD_MASK;
+			spidat1 &= ~(0x1 << chip_sel);
+		}
 
-		while ((ioread32(davinci_spi->base + SPIBUF)
-					& SPIBUF_RXEMPTY_MASK) == 0)
-			cpu_relax();
+		iowrite16(spidat1, dspi->base + SPIDAT1 + 2);
 	}
 }
 
 /**
+ * davinci_spi_get_prescale - Calculates the correct prescale value
+ * @maxspeed_hz: the maximum rate the SPI clock can run at
+ *
+ * This function calculates the prescale value that generates a clock rate
+ * less than or equal to the specified maximum.
+ *
+ * Returns: calculated prescale - 1 for easy programming into SPI registers
+ * or negative error number if valid prescalar cannot be updated.
+ */
+static inline int davinci_spi_get_prescale(struct davinci_spi *dspi,
+							u32 max_speed_hz)
+{
+	int ret;
+
+	ret = DIV_ROUND_UP(clk_get_rate(dspi->clk), max_speed_hz);
+
+	if (ret < 3 || ret > 256)
+		return -EINVAL;
+
+	return ret - 1;
+}
+
+/**
  * davinci_spi_setup_transfer - This functions will determine transfer method
  * @spi: spi device on which data transfer to be done
  * @t: spi transfer in which transfer info is filled
@@ -298,13 +278,15 @@ static int davinci_spi_setup_transfer(struct spi_device *spi,
 		struct spi_transfer *t)
 {
 
-	struct davinci_spi *davinci_spi;
-	struct davinci_spi_platform_data *pdata;
+	struct davinci_spi *dspi;
+	struct davinci_spi_config *spicfg;
 	u8 bits_per_word = 0;
-	u32 hz = 0, prescale = 0, clkspeed;
+	u32 hz = 0, spifmt = 0, prescale = 0;
 
-	davinci_spi = spi_master_get_devdata(spi->master);
-	pdata = davinci_spi->pdata;
+	dspi = spi_master_get_devdata(spi->master);
+	spicfg = (struct davinci_spi_config *)spi->controller_data;
+	if (!spicfg)
+		spicfg = &davinci_spi_default_cfg;
 
 	if (t) {
 		bits_per_word = t->bits_per_word;
@@ -320,111 +302,83 @@ static int davinci_spi_setup_transfer(struct spi_device *spi,
 	 * 8bit, 16bit or 32bit transfer
 	 */
 	if (bits_per_word <= 8 && bits_per_word >= 2) {
-		davinci_spi->get_rx = davinci_spi_rx_buf_u8;
-		davinci_spi->get_tx = davinci_spi_tx_buf_u8;
-		davinci_spi->slave[spi->chip_select].bytes_per_word = 1;
+		dspi->get_rx = davinci_spi_rx_buf_u8;
+		dspi->get_tx = davinci_spi_tx_buf_u8;
+		dspi->bytes_per_word[spi->chip_select] = 1;
 	} else if (bits_per_word <= 16 && bits_per_word >= 2) {
-		davinci_spi->get_rx = davinci_spi_rx_buf_u16;
-		davinci_spi->get_tx = davinci_spi_tx_buf_u16;
-		davinci_spi->slave[spi->chip_select].bytes_per_word = 2;
+		dspi->get_rx = davinci_spi_rx_buf_u16;
+		dspi->get_tx = davinci_spi_tx_buf_u16;
+		dspi->bytes_per_word[spi->chip_select] = 2;
 	} else
 		return -EINVAL;
 
 	if (!hz)
 		hz = spi->max_speed_hz;
 
-	clear_fmt_bits(davinci_spi->base, SPIFMT_CHARLEN_MASK,
-			spi->chip_select);
-	set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f,
-			spi->chip_select);
+	/* Set up SPIFMTn register, unique to this chipselect. */
 
-	clkspeed = clk_get_rate(davinci_spi->clk);
-	if (hz > clkspeed / 2)
-		prescale = 1 << 8;
-	if (hz < clkspeed / 256)
-		prescale = 255 << 8;
-	if (!prescale)
-		prescale = ((clkspeed / hz - 1) << 8) & 0x0000ff00;
+	prescale = davinci_spi_get_prescale(dspi, hz);
+	if (prescale < 0)
+		return prescale;
 
-	clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->chip_select);
-	set_fmt_bits(davinci_spi->base, prescale, spi->chip_select);
+	spifmt = (prescale << SPIFMT_PRESCALE_SHIFT) | (bits_per_word & 0x1f);
 
-	return 0;
-}
+	if (spi->mode & SPI_LSB_FIRST)
+		spifmt |= SPIFMT_SHIFTDIR_MASK;
 
-static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data)
-{
-	struct spi_device *spi = (struct spi_device *)data;
-	struct davinci_spi *davinci_spi;
-	struct davinci_spi_dma *davinci_spi_dma;
-	struct davinci_spi_platform_data *pdata;
+	if (spi->mode & SPI_CPOL)
+		spifmt |= SPIFMT_POLARITY_MASK;
 
-	davinci_spi = spi_master_get_devdata(spi->master);
-	davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]);
-	pdata = davinci_spi->pdata;
+	if (!(spi->mode & SPI_CPHA))
+		spifmt |= SPIFMT_PHASE_MASK;
 
-	if (ch_status == DMA_COMPLETE)
-		edma_stop(davinci_spi_dma->dma_rx_channel);
-	else
-		edma_clean_channel(davinci_spi_dma->dma_rx_channel);
+	/*
+	 * Version 1 hardware supports two basic SPI modes:
+	 *  - Standard SPI mode uses 4 pins, with chipselect
+	 *  - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
+	 *	(distinct from SPI_3WIRE, with just one data wire;
+	 *	or similar variants without MOSI or without MISO)
+	 *
+	 * Version 2 hardware supports an optional handshaking signal,
+	 * so it can support two more modes:
+	 *  - 5 pin SPI variant is standard SPI plus SPI_READY
+	 *  - 4 pin with enable is (SPI_READY | SPI_NO_CS)
+	 */
 
-	complete(&davinci_spi_dma->dma_rx_completion);
-	/* We must disable the DMA RX request */
-	davinci_spi_set_dma_req(spi, 0);
-}
+	if (dspi->version == SPI_VERSION_2) {
 
-static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data)
-{
-	struct spi_device *spi = (struct spi_device *)data;
-	struct davinci_spi *davinci_spi;
-	struct davinci_spi_dma *davinci_spi_dma;
-	struct davinci_spi_platform_data *pdata;
+		u32 delay = 0;
 
-	davinci_spi = spi_master_get_devdata(spi->master);
-	davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]);
-	pdata = davinci_spi->pdata;
+		spifmt |= ((spicfg->wdelay << SPIFMT_WDELAY_SHIFT)
+							& SPIFMT_WDELAY_MASK);
 
-	if (ch_status == DMA_COMPLETE)
-		edma_stop(davinci_spi_dma->dma_tx_channel);
-	else
-		edma_clean_channel(davinci_spi_dma->dma_tx_channel);
+		if (spicfg->odd_parity)
+			spifmt |= SPIFMT_ODD_PARITY_MASK;
 
-	complete(&davinci_spi_dma->dma_tx_completion);
-	/* We must disable the DMA TX request */
-	davinci_spi_set_dma_req(spi, 0);
-}
+		if (spicfg->parity_enable)
+			spifmt |= SPIFMT_PARITYENA_MASK;
 
-static int davinci_spi_request_dma(struct spi_device *spi)
-{
-	struct davinci_spi *davinci_spi;
-	struct davinci_spi_dma *davinci_spi_dma;
-	struct davinci_spi_platform_data *pdata;
-	struct device *sdev;
-	int r;
+		if (spicfg->timer_disable) {
+			spifmt |= SPIFMT_DISTIMER_MASK;
+		} else {
+			delay |= (spicfg->c2tdelay << SPIDELAY_C2TDELAY_SHIFT)
+						& SPIDELAY_C2TDELAY_MASK;
+			delay |= (spicfg->t2cdelay << SPIDELAY_T2CDELAY_SHIFT)
+						& SPIDELAY_T2CDELAY_MASK;
+		}
 
-	davinci_spi = spi_master_get_devdata(spi->master);
-	davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
-	pdata = davinci_spi->pdata;
-	sdev = davinci_spi->bitbang.master->dev.parent;
+		if (spi->mode & SPI_READY) {
+			spifmt |= SPIFMT_WAITENA_MASK;
+			delay |= (spicfg->t2edelay << SPIDELAY_T2EDELAY_SHIFT)
+						& SPIDELAY_T2EDELAY_MASK;
+			delay |= (spicfg->c2edelay << SPIDELAY_C2EDELAY_SHIFT)
+						& SPIDELAY_C2EDELAY_MASK;
+		}
 
-	r = edma_alloc_channel(davinci_spi_dma->dma_rx_sync_dev,
-				davinci_spi_dma_rx_callback, spi,
-				davinci_spi_dma->eventq);
-	if (r < 0) {
-		dev_dbg(sdev, "Unable to request DMA channel for SPI RX\n");
-		return -EAGAIN;
+		iowrite32(delay, dspi->base + SPIDELAY);
 	}
-	davinci_spi_dma->dma_rx_channel = r;
-	r = edma_alloc_channel(davinci_spi_dma->dma_tx_sync_dev,
-				davinci_spi_dma_tx_callback, spi,
-				davinci_spi_dma->eventq);
-	if (r < 0) {
-		edma_free_channel(davinci_spi_dma->dma_rx_channel);
-		davinci_spi_dma->dma_rx_channel = -1;
-		dev_dbg(sdev, "Unable to request DMA channel for SPI TX\n");
-		return -EAGAIN;
-	}
-	davinci_spi_dma->dma_tx_channel = r;
+
+	iowrite32(spifmt, dspi->base + SPIFMT0);
 
 	return 0;
 }
@@ -435,190 +389,40 @@ static int davinci_spi_request_dma(struct spi_device *spi)
  *
  * This functions sets the default transfer method.
  */
-
 static int davinci_spi_setup(struct spi_device *spi)
 {
-	int retval;
-	struct davinci_spi *davinci_spi;
-	struct davinci_spi_dma *davinci_spi_dma;
-	struct device *sdev;
+	int retval = 0;
+	struct davinci_spi *dspi;
+	struct davinci_spi_platform_data *pdata;
 
-	davinci_spi = spi_master_get_devdata(spi->master);
-	sdev = davinci_spi->bitbang.master->dev.parent;
+	dspi = spi_master_get_devdata(spi->master);
+	pdata = dspi->pdata;
 
 	/* if bits per word length is zero then set it default 8 */
 	if (!spi->bits_per_word)
 		spi->bits_per_word = 8;
 
-	davinci_spi->slave[spi->chip_select].cmd_to_write = 0;
-
-	if (use_dma && davinci_spi->dma_channels) {
-		davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
-
-		if ((davinci_spi_dma->dma_rx_channel == -1)
-				|| (davinci_spi_dma->dma_tx_channel == -1)) {
-			retval = davinci_spi_request_dma(spi);
-			if (retval < 0)
-				return retval;
-		}
-	}
-
-	/*
-	 * SPI in DaVinci and DA8xx operate between
-	 * 600 KHz and 50 MHz
-	 */
-	if (spi->max_speed_hz < 600000 || spi->max_speed_hz > 50000000) {
-		dev_dbg(sdev, "Operating frequency is not in acceptable "
-				"range\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Set up SPIFMTn register, unique to this chipselect.
-	 *
-	 * NOTE: we could do all of these with one write.  Also, some
-	 * of the "version 2" features are found in chips that don't
-	 * support all of them...
-	 */
-	if (spi->mode & SPI_LSB_FIRST)
-		set_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK,
-				spi->chip_select);
-	else
-		clear_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK,
-				spi->chip_select);
-
-	if (spi->mode & SPI_CPOL)
-		set_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK,
-				spi->chip_select);
-	else
-		clear_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK,
-				spi->chip_select);
+	if (!(spi->mode & SPI_NO_CS)) {
+		if ((pdata->chip_sel == NULL) ||
+		    (pdata->chip_sel[spi->chip_select] == SPI_INTERN_CS))
+			set_io_bits(dspi->base + SPIPC0, 1 << spi->chip_select);
 
-	if (!(spi->mode & SPI_CPHA))
-		set_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK,
-				spi->chip_select);
-	else
-		clear_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK,
-				spi->chip_select);
-
-	/*
-	 * Version 1 hardware supports two basic SPI modes:
-	 *  - Standard SPI mode uses 4 pins, with chipselect
-	 *  - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
-	 *	(distinct from SPI_3WIRE, with just one data wire;
-	 *	or similar variants without MOSI or without MISO)
-	 *
-	 * Version 2 hardware supports an optional handshaking signal,
-	 * so it can support two more modes:
-	 *  - 5 pin SPI variant is standard SPI plus SPI_READY
-	 *  - 4 pin with enable is (SPI_READY | SPI_NO_CS)
-	 */
-
-	if (davinci_spi->version == SPI_VERSION_2) {
-		clear_fmt_bits(davinci_spi->base, SPIFMT_WDELAY_MASK,
-				spi->chip_select);
-		set_fmt_bits(davinci_spi->base,
-				(davinci_spi->pdata->wdelay
-						<< SPIFMT_WDELAY_SHIFT)
-					& SPIFMT_WDELAY_MASK,
-				spi->chip_select);
-
-		if (davinci_spi->pdata->odd_parity)
-			set_fmt_bits(davinci_spi->base,
-					SPIFMT_ODD_PARITY_MASK,
-					spi->chip_select);
-		else
-			clear_fmt_bits(davinci_spi->base,
-					SPIFMT_ODD_PARITY_MASK,
-					spi->chip_select);
-
-		if (davinci_spi->pdata->parity_enable)
-			set_fmt_bits(davinci_spi->base,
-					SPIFMT_PARITYENA_MASK,
-					spi->chip_select);
-		else
-			clear_fmt_bits(davinci_spi->base,
-					SPIFMT_PARITYENA_MASK,
-					spi->chip_select);
-
-		if (davinci_spi->pdata->wait_enable)
-			set_fmt_bits(davinci_spi->base,
-					SPIFMT_WAITENA_MASK,
-					spi->chip_select);
-		else
-			clear_fmt_bits(davinci_spi->base,
-					SPIFMT_WAITENA_MASK,
-					spi->chip_select);
-
-		if (davinci_spi->pdata->timer_disable)
-			set_fmt_bits(davinci_spi->base,
-					SPIFMT_DISTIMER_MASK,
-					spi->chip_select);
-		else
-			clear_fmt_bits(davinci_spi->base,
-					SPIFMT_DISTIMER_MASK,
-					spi->chip_select);
 	}
 
-	retval = davinci_spi_setup_transfer(spi, NULL);
-
-	return retval;
-}
-
-static void davinci_spi_cleanup(struct spi_device *spi)
-{
-	struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master);
-	struct davinci_spi_dma *davinci_spi_dma;
-
-	davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
-
-	if (use_dma && davinci_spi->dma_channels) {
-		davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
-
-		if ((davinci_spi_dma->dma_rx_channel != -1)
-				&& (davinci_spi_dma->dma_tx_channel != -1)) {
-			edma_free_channel(davinci_spi_dma->dma_tx_channel);
-			edma_free_channel(davinci_spi_dma->dma_rx_channel);
-		}
-	}
-}
-
-static int davinci_spi_bufs_prep(struct spi_device *spi,
-				 struct davinci_spi *davinci_spi)
-{
-	int op_mode = 0;
-
-	/*
-	 * REVISIT  unless devices disagree about SPI_LOOP or
-	 * SPI_READY (SPI_NO_CS only allows one device!), this
-	 * should not need to be done before each message...
-	 * optimize for both flags staying cleared.
-	 */
-
-	op_mode = SPIPC0_DIFUN_MASK
-		| SPIPC0_DOFUN_MASK
-		| SPIPC0_CLKFUN_MASK;
-	if (!(spi->mode & SPI_NO_CS))
-		op_mode |= 1 << spi->chip_select;
 	if (spi->mode & SPI_READY)
-		op_mode |= SPIPC0_SPIENA_MASK;
-
-	iowrite32(op_mode, davinci_spi->base + SPIPC0);
+		set_io_bits(dspi->base + SPIPC0, SPIPC0_SPIENA_MASK);
 
 	if (spi->mode & SPI_LOOP)
-		set_io_bits(davinci_spi->base + SPIGCR1,
-				SPIGCR1_LOOPBACK_MASK);
+		set_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);
 	else
-		clear_io_bits(davinci_spi->base + SPIGCR1,
-				SPIGCR1_LOOPBACK_MASK);
+		clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_LOOPBACK_MASK);
 
-	return 0;
+	return retval;
 }
 
-static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
-				   int int_status)
+static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
 {
-	struct device *sdev = davinci_spi->bitbang.master->dev.parent;
+	struct device *sdev = dspi->bitbang.master->dev.parent;
 
 	if (int_status & SPIFLG_TIMEOUT_MASK) {
 		dev_dbg(sdev, "SPI Time-out Error\n");
@@ -633,7 +437,7 @@ static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
 		return -EIO;
 	}
 
-	if (davinci_spi->version == SPI_VERSION_2) {
+	if (dspi->version == SPI_VERSION_2) {
 		if (int_status & SPIFLG_DLEN_ERR_MASK) {
 			dev_dbg(sdev, "SPI Data Length Error\n");
 			return -EIO;
@@ -646,10 +450,6 @@ static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
 			dev_dbg(sdev, "SPI Data Overrun error\n");
 			return -EIO;
 		}
-		if (int_status & SPIFLG_TX_INTR_MASK) {
-			dev_dbg(sdev, "SPI TX intr bit set\n");
-			return -EIO;
-		}
 		if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) {
 			dev_dbg(sdev, "SPI Buffer Init Active\n");
 			return -EBUSY;
@@ -660,366 +460,339 @@ static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
 }
 
 /**
- * davinci_spi_bufs - functions which will handle transfer data
- * @spi: spi device on which data transfer to be done
- * @t: spi transfer in which transfer info is filled
+ * davinci_spi_process_events - check for and handle any SPI controller events
+ * @dspi: the controller data
  *
- * This function will put data to be transferred into data register
- * of SPI controller and then wait until the completion will be marked
- * by the IRQ Handler.
+ * This function will check the SPIFLG register and handle any events that are
+ * detected there
  */
-static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t)
+static int davinci_spi_process_events(struct davinci_spi *dspi)
 {
-	struct davinci_spi *davinci_spi;
-	int int_status, count, ret;
-	u8 conv, tmp;
-	u32 tx_data, data1_reg_val;
-	u32 buf_val, flg_val;
-	struct davinci_spi_platform_data *pdata;
-
-	davinci_spi = spi_master_get_devdata(spi->master);
-	pdata = davinci_spi->pdata;
-
-	davinci_spi->tx = t->tx_buf;
-	davinci_spi->rx = t->rx_buf;
-
-	/* convert len to words based on bits_per_word */
-	conv = davinci_spi->slave[spi->chip_select].bytes_per_word;
-	davinci_spi->count = t->len / conv;
-
-	INIT_COMPLETION(davinci_spi->done);
-
-	ret = davinci_spi_bufs_prep(spi, davinci_spi);
-	if (ret)
-		return ret;
-
-	/* Enable SPI */
-	set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
-
-	iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) |
-			(pdata->t2cdelay << SPI_T2CDELAY_SHIFT),
-			davinci_spi->base + SPIDELAY);
-
-	count = davinci_spi->count;
-	data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT;
-	tmp = ~(0x1 << spi->chip_select);
-
-	clear_io_bits(davinci_spi->base + SPIDEF, ~tmp);
-
-	data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT;
+	u32 buf, status, errors = 0, spidat1;
 
-	while ((ioread32(davinci_spi->base + SPIBUF)
-				& SPIBUF_RXEMPTY_MASK) == 0)
-		cpu_relax();
+	buf = ioread32(dspi->base + SPIBUF);
 
-	/* Determine the command to execute READ or WRITE */
-	if (t->tx_buf) {
-		clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL);
+	if (dspi->rcount > 0 && !(buf & SPIBUF_RXEMPTY_MASK)) {
+		dspi->get_rx(buf & 0xFFFF, dspi);
+		dspi->rcount--;
+	}
 
-		while (1) {
-			tx_data = davinci_spi->get_tx(davinci_spi);
+	status = ioread32(dspi->base + SPIFLG);
 
-			data1_reg_val &= ~(0xFFFF);
-			data1_reg_val |= (0xFFFF & tx_data);
+	if (unlikely(status & SPIFLG_ERROR_MASK)) {
+		errors = status & SPIFLG_ERROR_MASK;
+		goto out;
+	}
 
-			buf_val = ioread32(davinci_spi->base + SPIBUF);
-			if ((buf_val & SPIBUF_TXFULL_MASK) == 0) {
-				iowrite32(data1_reg_val,
-						davinci_spi->base + SPIDAT1);
+	if (dspi->wcount > 0 && !(buf & SPIBUF_TXFULL_MASK)) {
+		spidat1 = ioread32(dspi->base + SPIDAT1);
+		dspi->wcount--;
+		spidat1 &= ~0xFFFF;
+		spidat1 |= 0xFFFF & dspi->get_tx(dspi);
+		iowrite32(spidat1, dspi->base + SPIDAT1);
+	}
 
-				count--;
-			}
-			while (ioread32(davinci_spi->base + SPIBUF)
-					& SPIBUF_RXEMPTY_MASK)
-				cpu_relax();
-
-			/* getting the returned byte */
-			if (t->rx_buf) {
-				buf_val = ioread32(davinci_spi->base + SPIBUF);
-				davinci_spi->get_rx(buf_val, davinci_spi);
-			}
-			if (count <= 0)
-				break;
-		}
-	} else {
-		if (pdata->poll_mode) {
-			while (1) {
-				/* keeps the serial clock going */
-				if ((ioread32(davinci_spi->base + SPIBUF)
-						& SPIBUF_TXFULL_MASK) == 0)
-					iowrite32(data1_reg_val,
-						davinci_spi->base + SPIDAT1);
-
-				while (ioread32(davinci_spi->base + SPIBUF) &
-						SPIBUF_RXEMPTY_MASK)
-					cpu_relax();
-
-				flg_val = ioread32(davinci_spi->base + SPIFLG);
-				buf_val = ioread32(davinci_spi->base + SPIBUF);
-
-				davinci_spi->get_rx(buf_val, davinci_spi);
-
-				count--;
-				if (count <= 0)
-					break;
-			}
-		} else {	/* Receive in Interrupt mode */
-			int i;
+out:
+	return errors;
+}
 
-			for (i = 0; i < davinci_spi->count; i++) {
-				set_io_bits(davinci_spi->base + SPIINT,
-						SPIINT_BITERR_INTR
-						| SPIINT_OVRRUN_INTR
-						| SPIINT_RX_INTR);
+static void davinci_spi_dma_callback(unsigned lch, u16 status, void *data)
+{
+	struct davinci_spi *dspi = data;
+	struct davinci_spi_dma *dma = &dspi->dma;
 
-				iowrite32(data1_reg_val,
-						davinci_spi->base + SPIDAT1);
+	edma_stop(lch);
 
-				while (ioread32(davinci_spi->base + SPIINT) &
-						SPIINT_RX_INTR)
-					cpu_relax();
-			}
-			iowrite32((data1_reg_val & 0x0ffcffff),
-					davinci_spi->base + SPIDAT1);
-		}
+	if (status == DMA_COMPLETE) {
+		if (lch == dma->rx_channel)
+			dspi->rcount = 0;
+		if (lch == dma->tx_channel)
+			dspi->wcount = 0;
 	}
 
-	/*
-	 * Check for bit error, desync error,parity error,timeout error and
-	 * receive overflow errors
-	 */
-	int_status = ioread32(davinci_spi->base + SPIFLG);
-
-	ret = davinci_spi_check_error(davinci_spi, int_status);
-	if (ret != 0)
-		return ret;
-
-	/* SPI Framework maintains the count only in bytes so convert back */
-	davinci_spi->count *= conv;
-
-	return t->len;
+	if ((!dspi->wcount && !dspi->rcount) || (status != DMA_COMPLETE))
+		complete(&dspi->done);
 }
 
-#define DAVINCI_DMA_DATA_TYPE_S8	0x01
-#define DAVINCI_DMA_DATA_TYPE_S16	0x02
-#define DAVINCI_DMA_DATA_TYPE_S32	0x04
-
-static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t)
+/**
+ * davinci_spi_bufs - functions which will handle transfer data
+ * @spi: spi device on which data transfer to be done
+ * @t: spi transfer in which transfer info is filled
+ *
+ * This function will put data to be transferred into data register
+ * of SPI controller and then wait until the completion will be marked
+ * by the IRQ Handler.
+ */
+static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 {
-	struct davinci_spi *davinci_spi;
-	int int_status = 0;
-	int count, temp_count;
-	u8 conv = 1;
-	u8 tmp;
-	u32 data1_reg_val;
-	struct davinci_spi_dma *davinci_spi_dma;
-	int word_len, data_type, ret;
-	unsigned long tx_reg, rx_reg;
+	struct davinci_spi *dspi;
+	int data_type, ret;
+	u32 tx_data, spidat1;
+	u32 errors = 0;
+	struct davinci_spi_config *spicfg;
 	struct davinci_spi_platform_data *pdata;
+	unsigned uninitialized_var(rx_buf_count);
 	struct device *sdev;
 
-	davinci_spi = spi_master_get_devdata(spi->master);
-	pdata = davinci_spi->pdata;
-	sdev = davinci_spi->bitbang.master->dev.parent;
-
-	davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select];
-
-	tx_reg = (unsigned long)davinci_spi->pbase + SPIDAT1;
-	rx_reg = (unsigned long)davinci_spi->pbase + SPIBUF;
-
-	davinci_spi->tx = t->tx_buf;
-	davinci_spi->rx = t->rx_buf;
+	dspi = spi_master_get_devdata(spi->master);
+	pdata = dspi->pdata;
+	spicfg = (struct davinci_spi_config *)spi->controller_data;
+	if (!spicfg)
+		spicfg = &davinci_spi_default_cfg;
+	sdev = dspi->bitbang.master->dev.parent;
 
 	/* convert len to words based on bits_per_word */
-	conv = davinci_spi->slave[spi->chip_select].bytes_per_word;
-	davinci_spi->count = t->len / conv;
-
-	INIT_COMPLETION(davinci_spi->done);
+	data_type = dspi->bytes_per_word[spi->chip_select];
 
-	init_completion(&davinci_spi_dma->dma_rx_completion);
-	init_completion(&davinci_spi_dma->dma_tx_completion);
+	dspi->tx = t->tx_buf;
+	dspi->rx = t->rx_buf;
+	dspi->wcount = t->len / data_type;
+	dspi->rcount = dspi->wcount;
 
-	word_len = conv * 8;
-
-	if (word_len <= 8)
-		data_type = DAVINCI_DMA_DATA_TYPE_S8;
-	else if (word_len <= 16)
-		data_type = DAVINCI_DMA_DATA_TYPE_S16;
-	else if (word_len <= 32)
-		data_type = DAVINCI_DMA_DATA_TYPE_S32;
-	else
-		return -EINVAL;
-
-	ret = davinci_spi_bufs_prep(spi, davinci_spi);
-	if (ret)
-		return ret;
+	spidat1 = ioread32(dspi->base + SPIDAT1);
 
-	/* Put delay val if required */
-	iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) |
-			(pdata->t2cdelay << SPI_T2CDELAY_SHIFT),
-			davinci_spi->base + SPIDELAY);
+	clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
+	set_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
 
-	count = davinci_spi->count;	/* the number of elements */
-	data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT;
+	INIT_COMPLETION(dspi->done);
 
-	/* CS default = 0xFF */
-	tmp = ~(0x1 << spi->chip_select);
+	if (spicfg->io_type == SPI_IO_TYPE_INTR)
+		set_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
 
-	clear_io_bits(davinci_spi->base + SPIDEF, ~tmp);
-
-	data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT;
-
-	/* disable all interrupts for dma transfers */
-	clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL);
-	/* Disable SPI to write configuration bits in SPIDAT */
-	clear_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
-	iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
-	/* Enable SPI */
-	set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
-
-	while ((ioread32(davinci_spi->base + SPIBUF)
-				& SPIBUF_RXEMPTY_MASK) == 0)
-		cpu_relax();
-
-
-	if (t->tx_buf) {
-		t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, count,
-				DMA_TO_DEVICE);
-		if (dma_mapping_error(&spi->dev, t->tx_dma)) {
-			dev_dbg(sdev, "Unable to DMA map a %d bytes"
-				" TX buffer\n", count);
-			return -ENOMEM;
-		}
-		temp_count = count;
+	if (spicfg->io_type != SPI_IO_TYPE_DMA) {
+		/* start the transfer */
+		dspi->wcount--;
+		tx_data = dspi->get_tx(dspi);
+		spidat1 &= 0xFFFF0000;
+		spidat1 |= tx_data & 0xFFFF;
+		iowrite32(spidat1, dspi->base + SPIDAT1);
 	} else {
-		/* We need TX clocking for RX transaction */
-		t->tx_dma = dma_map_single(&spi->dev,
-				(void *)davinci_spi->tmp_buf, count + 1,
-				DMA_TO_DEVICE);
-		if (dma_mapping_error(&spi->dev, t->tx_dma)) {
-			dev_dbg(sdev, "Unable to DMA map a %d bytes"
-				" TX tmp buffer\n", count);
-			return -ENOMEM;
+		struct davinci_spi_dma *dma;
+		unsigned long tx_reg, rx_reg;
+		struct edmacc_param param;
+		void *rx_buf;
+
+		dma = &dspi->dma;
+
+		tx_reg = (unsigned long)dspi->pbase + SPIDAT1;
+		rx_reg = (unsigned long)dspi->pbase + SPIBUF;
+
+		/*
+		 * Transmit DMA setup
+		 *
+		 * If there is transmit data, map the transmit buffer, set it
+		 * as the source of data and set the source B index to data
+		 * size. If there is no transmit data, set the transmit register
+		 * as the source of data, and set the source B index to zero.
+		 *
+		 * The destination is always the transmit register itself. And
+		 * the destination never increments.
+		 */
+
+		if (t->tx_buf) {
+			t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf,
+						dspi->wcount, DMA_TO_DEVICE);
+			if (dma_mapping_error(&spi->dev, t->tx_dma)) {
+				dev_dbg(sdev, "Unable to DMA map %d bytes"
+						"TX buffer\n", dspi->wcount);
+				return -ENOMEM;
+			}
 		}
-		temp_count = count + 1;
-	}
 
-	edma_set_transfer_params(davinci_spi_dma->dma_tx_channel,
-					data_type, temp_count, 1, 0, ASYNC);
-	edma_set_dest(davinci_spi_dma->dma_tx_channel, tx_reg, INCR, W8BIT);
-	edma_set_src(davinci_spi_dma->dma_tx_channel, t->tx_dma, INCR, W8BIT);
-	edma_set_src_index(davinci_spi_dma->dma_tx_channel, data_type, 0);
-	edma_set_dest_index(davinci_spi_dma->dma_tx_channel, 0, 0);
-
-	if (t->rx_buf) {
-		/* initiate transaction */
-		iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+		param.opt = TCINTEN | EDMA_TCC(dma->tx_channel);
+		param.src = t->tx_buf ? t->tx_dma : tx_reg;
+		param.a_b_cnt = dspi->wcount << 16 | data_type;
+		param.dst = tx_reg;
+		param.src_dst_bidx = t->tx_buf ? data_type : 0;
+		param.link_bcntrld = 0xffff;
+		param.src_dst_cidx = 0;
+		param.ccnt = 1;
+		edma_write_slot(dma->tx_channel, &param);
+		edma_link(dma->tx_channel, dma->dummy_param_slot);
+
+		/*
+		 * Receive DMA setup
+		 *
+		 * If there is receive buffer, use it to receive data. If there
+		 * is none provided, use a temporary receive buffer. Set the
+		 * destination B index to 0 so effectively only one byte is used
+		 * in the temporary buffer (address does not increment).
+		 *
+		 * The source of receive data is the receive data register. The
+		 * source address never increments.
+		 */
+
+		if (t->rx_buf) {
+			rx_buf = t->rx_buf;
+			rx_buf_count = dspi->rcount;
+		} else {
+			rx_buf = dspi->rx_tmp_buf;
+			rx_buf_count = sizeof(dspi->rx_tmp_buf);
+		}
 
-		t->rx_dma = dma_map_single(&spi->dev, (void *)t->rx_buf, count,
-				DMA_FROM_DEVICE);
+		t->rx_dma = dma_map_single(&spi->dev, rx_buf, rx_buf_count,
+							DMA_FROM_DEVICE);
 		if (dma_mapping_error(&spi->dev, t->rx_dma)) {
 			dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n",
-					count);
-			if (t->tx_buf != NULL)
-				dma_unmap_single(NULL, t->tx_dma,
-						 count, DMA_TO_DEVICE);
+								rx_buf_count);
+			if (t->tx_buf)
+				dma_unmap_single(NULL, t->tx_dma, dspi->wcount,
+								DMA_TO_DEVICE);
 			return -ENOMEM;
 		}
-		edma_set_transfer_params(davinci_spi_dma->dma_rx_channel,
-				data_type, count, 1, 0, ASYNC);
-		edma_set_src(davinci_spi_dma->dma_rx_channel,
-				rx_reg, INCR, W8BIT);
-		edma_set_dest(davinci_spi_dma->dma_rx_channel,
-				t->rx_dma, INCR, W8BIT);
-		edma_set_src_index(davinci_spi_dma->dma_rx_channel, 0, 0);
-		edma_set_dest_index(davinci_spi_dma->dma_rx_channel,
-				data_type, 0);
-	}
 
-	if ((t->tx_buf) || (t->rx_buf))
-		edma_start(davinci_spi_dma->dma_tx_channel);
+		param.opt = TCINTEN | EDMA_TCC(dma->rx_channel);
+		param.src = rx_reg;
+		param.a_b_cnt = dspi->rcount << 16 | data_type;
+		param.dst = t->rx_dma;
+		param.src_dst_bidx = (t->rx_buf ? data_type : 0) << 16;
+		param.link_bcntrld = 0xffff;
+		param.src_dst_cidx = 0;
+		param.ccnt = 1;
+		edma_write_slot(dma->rx_channel, &param);
+
+		if (pdata->cshold_bug)
+			iowrite16(spidat1 >> 16, dspi->base + SPIDAT1 + 2);
+
+		edma_start(dma->rx_channel);
+		edma_start(dma->tx_channel);
+		set_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
+	}
 
-	if (t->rx_buf)
-		edma_start(davinci_spi_dma->dma_rx_channel);
+	/* Wait for the transfer to complete */
+	if (spicfg->io_type != SPI_IO_TYPE_POLL) {
+		wait_for_completion_interruptible(&(dspi->done));
+	} else {
+		while (dspi->rcount > 0 || dspi->wcount > 0) {
+			errors = davinci_spi_process_events(dspi);
+			if (errors)
+				break;
+			cpu_relax();
+		}
+	}
 
-	if ((t->rx_buf) || (t->tx_buf))
-		davinci_spi_set_dma_req(spi, 1);
+	clear_io_bits(dspi->base + SPIINT, SPIINT_MASKALL);
+	if (spicfg->io_type == SPI_IO_TYPE_DMA) {
 
-	if (t->tx_buf)
-		wait_for_completion_interruptible(
-				&davinci_spi_dma->dma_tx_completion);
+		if (t->tx_buf)
+			dma_unmap_single(NULL, t->tx_dma, dspi->wcount,
+								DMA_TO_DEVICE);
 
-	if (t->rx_buf)
-		wait_for_completion_interruptible(
-				&davinci_spi_dma->dma_rx_completion);
+		dma_unmap_single(NULL, t->rx_dma, rx_buf_count,
+							DMA_FROM_DEVICE);
 
-	dma_unmap_single(NULL, t->tx_dma, temp_count, DMA_TO_DEVICE);
+		clear_io_bits(dspi->base + SPIINT, SPIINT_DMA_REQ_EN);
+	}
 
-	if (t->rx_buf)
-		dma_unmap_single(NULL, t->rx_dma, count, DMA_FROM_DEVICE);
+	clear_io_bits(dspi->base + SPIGCR1, SPIGCR1_SPIENA_MASK);
+	set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
 
 	/*
 	 * Check for bit error, desync error,parity error,timeout error and
 	 * receive overflow errors
 	 */
-	int_status = ioread32(davinci_spi->base + SPIFLG);
-
-	ret = davinci_spi_check_error(davinci_spi, int_status);
-	if (ret != 0)
+	if (errors) {
+		ret = davinci_spi_check_error(dspi, errors);
+		WARN(!ret, "%s: error reported but no error found!\n",
+							dev_name(&spi->dev));
 		return ret;
+	}
 
-	/* SPI Framework maintains the count only in bytes so convert back */
-	davinci_spi->count *= conv;
+	if (dspi->rcount != 0 || dspi->wcount != 0) {
+		dev_err(sdev, "SPI data transfer error\n");
+		return -EIO;
+	}
 
 	return t->len;
 }
 
 /**
- * davinci_spi_irq - IRQ handler for DaVinci SPI
+ * davinci_spi_irq - Interrupt handler for SPI Master Controller
  * @irq: IRQ number for this SPI Master
  * @context_data: structure for SPI Master controller davinci_spi
+ *
+ * ISR will determine that interrupt arrives either for READ or WRITE command.
+ * According to command it will do the appropriate action. It will check
+ * transfer length and if it is not zero then dispatch transfer command again.
+ * If transfer length is zero then it will indicate the COMPLETION so that
+ * davinci_spi_bufs function can go ahead.
  */
-static irqreturn_t davinci_spi_irq(s32 irq, void *context_data)
+static irqreturn_t davinci_spi_irq(s32 irq, void *data)
 {
-	struct davinci_spi *davinci_spi = context_data;
-	u32 int_status, rx_data = 0;
-	irqreturn_t ret = IRQ_NONE;
+	struct davinci_spi *dspi = data;
+	int status;
 
-	int_status = ioread32(davinci_spi->base + SPIFLG);
+	status = davinci_spi_process_events(dspi);
+	if (unlikely(status != 0))
+		clear_io_bits(dspi->base + SPIINT, SPIINT_MASKINT);
 
-	while ((int_status & SPIFLG_RX_INTR_MASK)) {
-		if (likely(int_status & SPIFLG_RX_INTR_MASK)) {
-			ret = IRQ_HANDLED;
+	if ((!dspi->rcount && !dspi->wcount) || status)
+		complete(&dspi->done);
 
-			rx_data = ioread32(davinci_spi->base + SPIBUF);
-			davinci_spi->get_rx(rx_data, davinci_spi);
+	return IRQ_HANDLED;
+}
 
-			/* Disable Receive Interrupt */
-			iowrite32(~(SPIINT_RX_INTR | SPIINT_TX_INTR),
-					davinci_spi->base + SPIINT);
-		} else
-			(void)davinci_spi_check_error(davinci_spi, int_status);
+static int davinci_spi_request_dma(struct davinci_spi *dspi)
+{
+	int r;
+	struct davinci_spi_dma *dma = &dspi->dma;
 
-		int_status = ioread32(davinci_spi->base + SPIFLG);
+	r = edma_alloc_channel(dma->rx_channel, davinci_spi_dma_callback, dspi,
+								dma->eventq);
+	if (r < 0) {
+		pr_err("Unable to request DMA channel for SPI RX\n");
+		r = -EAGAIN;
+		goto rx_dma_failed;
 	}
 
-	return ret;
+	r = edma_alloc_channel(dma->tx_channel, davinci_spi_dma_callback, dspi,
+								dma->eventq);
+	if (r < 0) {
+		pr_err("Unable to request DMA channel for SPI TX\n");
+		r = -EAGAIN;
+		goto tx_dma_failed;
+	}
+
+	r = edma_alloc_slot(EDMA_CTLR(dma->tx_channel), EDMA_SLOT_ANY);
+	if (r < 0) {
+		pr_err("Unable to request SPI TX DMA param slot\n");
+		r = -EAGAIN;
+		goto param_failed;
+	}
+	dma->dummy_param_slot = r;
+	edma_link(dma->dummy_param_slot, dma->dummy_param_slot);
+
+	return 0;
+param_failed:
+	edma_free_channel(dma->tx_channel);
+tx_dma_failed:
+	edma_free_channel(dma->rx_channel);
+rx_dma_failed:
+	return r;
 }
 
 /**
  * davinci_spi_probe - probe function for SPI Master Controller
  * @pdev: platform_device structure which contains plateform specific data
+ *
+ * According to Linux Device Model this function will be invoked by Linux
+ * with platform_device struct which contains the device specific info.
+ * This function will map the SPI controller's memory, register IRQ,
+ * Reset SPI controller and setting its registers to default value.
+ * It will invoke spi_bitbang_start to create work queue so that client driver
+ * can register transfer method to work queue.
  */
 static int davinci_spi_probe(struct platform_device *pdev)
 {
 	struct spi_master *master;
-	struct davinci_spi *davinci_spi;
+	struct davinci_spi *dspi;
 	struct davinci_spi_platform_data *pdata;
 	struct resource *r, *mem;
 	resource_size_t dma_rx_chan = SPI_NO_RESOURCE;
 	resource_size_t	dma_tx_chan = SPI_NO_RESOURCE;
 	resource_size_t	dma_eventq = SPI_NO_RESOURCE;
 	int i = 0, ret = 0;
+	u32 spipc0;
 
 	pdata = pdev->dev.platform_data;
 	if (pdata == NULL) {
@@ -1035,8 +808,8 @@ static int davinci_spi_probe(struct platform_device *pdev)
 
 	dev_set_drvdata(&pdev->dev, master);
 
-	davinci_spi = spi_master_get_devdata(master);
-	if (davinci_spi == NULL) {
+	dspi = spi_master_get_devdata(master);
+	if (dspi == NULL) {
 		ret = -ENOENT;
 		goto free_master;
 	}
@@ -1047,164 +820,143 @@ static int davinci_spi_probe(struct platform_device *pdev)
 		goto free_master;
 	}
 
-	davinci_spi->pbase = r->start;
-	davinci_spi->region_size = resource_size(r);
-	davinci_spi->pdata = pdata;
+	dspi->pbase = r->start;
+	dspi->pdata = pdata;
 
-	mem = request_mem_region(r->start, davinci_spi->region_size,
-					pdev->name);
+	mem = request_mem_region(r->start, resource_size(r), pdev->name);
 	if (mem == NULL) {
 		ret = -EBUSY;
 		goto free_master;
 	}
 
-	davinci_spi->base = (struct davinci_spi_reg __iomem *)
-			ioremap(r->start, davinci_spi->region_size);
-	if (davinci_spi->base == NULL) {
+	dspi->base = ioremap(r->start, resource_size(r));
+	if (dspi->base == NULL) {
 		ret = -ENOMEM;
 		goto release_region;
 	}
 
-	davinci_spi->irq = platform_get_irq(pdev, 0);
-	if (davinci_spi->irq <= 0) {
+	dspi->irq = platform_get_irq(pdev, 0);
+	if (dspi->irq <= 0) {
 		ret = -EINVAL;
 		goto unmap_io;
 	}
 
-	ret = request_irq(davinci_spi->irq, davinci_spi_irq, IRQF_DISABLED,
-			  dev_name(&pdev->dev), davinci_spi);
+	ret = request_irq(dspi->irq, davinci_spi_irq, 0, dev_name(&pdev->dev),
+									dspi);
 	if (ret)
 		goto unmap_io;
 
-	/* Allocate tmp_buf for tx_buf */
-	davinci_spi->tmp_buf = kzalloc(SPI_BUFSIZ, GFP_KERNEL);
-	if (davinci_spi->tmp_buf == NULL) {
-		ret = -ENOMEM;
-		goto irq_free;
-	}
-
-	davinci_spi->bitbang.master = spi_master_get(master);
-	if (davinci_spi->bitbang.master == NULL) {
+	dspi->bitbang.master = spi_master_get(master);
+	if (dspi->bitbang.master == NULL) {
 		ret = -ENODEV;
-		goto free_tmp_buf;
+		goto irq_free;
 	}
 
-	davinci_spi->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(davinci_spi->clk)) {
+	dspi->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(dspi->clk)) {
 		ret = -ENODEV;
 		goto put_master;
 	}
-	clk_enable(davinci_spi->clk);
-
+	clk_enable(dspi->clk);
 
 	master->bus_num = pdev->id;
 	master->num_chipselect = pdata->num_chipselect;
 	master->setup = davinci_spi_setup;
-	master->cleanup = davinci_spi_cleanup;
-
-	davinci_spi->bitbang.chipselect = davinci_spi_chipselect;
-	davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer;
-
-	davinci_spi->version = pdata->version;
-	use_dma = pdata->use_dma;
-
-	davinci_spi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
-	if (davinci_spi->version == SPI_VERSION_2)
-		davinci_spi->bitbang.flags |= SPI_READY;
-
-	if (use_dma) {
-			r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
-			if (r)
-				dma_rx_chan = r->start;
-			r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
-			if (r)
-				dma_tx_chan = r->start;
-			r = platform_get_resource(pdev, IORESOURCE_DMA, 2);
-			if (r)
-				dma_eventq = r->start;
-	}
 
-	if (!use_dma ||
-	    dma_rx_chan == SPI_NO_RESOURCE ||
-	    dma_tx_chan == SPI_NO_RESOURCE ||
-	    dma_eventq	== SPI_NO_RESOURCE) {
-		davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio;
-		use_dma = 0;
-	} else {
-		davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_dma;
-		davinci_spi->dma_channels = kzalloc(master->num_chipselect
-				* sizeof(struct davinci_spi_dma), GFP_KERNEL);
-		if (davinci_spi->dma_channels == NULL) {
-			ret = -ENOMEM;
+	dspi->bitbang.chipselect = davinci_spi_chipselect;
+	dspi->bitbang.setup_transfer = davinci_spi_setup_transfer;
+
+	dspi->version = pdata->version;
+
+	dspi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP;
+	if (dspi->version == SPI_VERSION_2)
+		dspi->bitbang.flags |= SPI_READY;
+
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+	if (r)
+		dma_rx_chan = r->start;
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+	if (r)
+		dma_tx_chan = r->start;
+	r = platform_get_resource(pdev, IORESOURCE_DMA, 2);
+	if (r)
+		dma_eventq = r->start;
+
+	dspi->bitbang.txrx_bufs = davinci_spi_bufs;
+	if (dma_rx_chan != SPI_NO_RESOURCE &&
+	    dma_tx_chan != SPI_NO_RESOURCE &&
+	    dma_eventq != SPI_NO_RESOURCE) {
+		dspi->dma.rx_channel = dma_rx_chan;
+		dspi->dma.tx_channel = dma_tx_chan;
+		dspi->dma.eventq = dma_eventq;
+
+		ret = davinci_spi_request_dma(dspi);
+		if (ret)
 			goto free_clk;
-		}
 
-		for (i = 0; i < master->num_chipselect; i++) {
-			davinci_spi->dma_channels[i].dma_rx_channel = -1;
-			davinci_spi->dma_channels[i].dma_rx_sync_dev =
-				dma_rx_chan;
-			davinci_spi->dma_channels[i].dma_tx_channel = -1;
-			davinci_spi->dma_channels[i].dma_tx_sync_dev =
-				dma_tx_chan;
-			davinci_spi->dma_channels[i].eventq = dma_eventq;
-		}
-		dev_info(&pdev->dev, "DaVinci SPI driver in EDMA mode\n"
-				"Using RX channel = %d , TX channel = %d and "
-				"event queue = %d", dma_rx_chan, dma_tx_chan,
+		dev_info(&pdev->dev, "DMA: supported\n");
+		dev_info(&pdev->dev, "DMA: RX channel: %d, TX channel: %d, "
+				"event queue: %d\n", dma_rx_chan, dma_tx_chan,
 				dma_eventq);
 	}
 
-	davinci_spi->get_rx = davinci_spi_rx_buf_u8;
-	davinci_spi->get_tx = davinci_spi_tx_buf_u8;
+	dspi->get_rx = davinci_spi_rx_buf_u8;
+	dspi->get_tx = davinci_spi_tx_buf_u8;
 
-	init_completion(&davinci_spi->done);
+	init_completion(&dspi->done);
 
 	/* Reset In/OUT SPI module */
-	iowrite32(0, davinci_spi->base + SPIGCR0);
+	iowrite32(0, dspi->base + SPIGCR0);
 	udelay(100);
-	iowrite32(1, davinci_spi->base + SPIGCR0);
+	iowrite32(1, dspi->base + SPIGCR0);
 
-	/* Clock internal */
-	if (davinci_spi->pdata->clk_internal)
-		set_io_bits(davinci_spi->base + SPIGCR1,
-				SPIGCR1_CLKMOD_MASK);
-	else
-		clear_io_bits(davinci_spi->base + SPIGCR1,
-				SPIGCR1_CLKMOD_MASK);
+	/* Set up SPIPC0.  CS and ENA init is done in davinci_spi_setup */
+	spipc0 = SPIPC0_DIFUN_MASK | SPIPC0_DOFUN_MASK | SPIPC0_CLKFUN_MASK;
+	iowrite32(spipc0, dspi->base + SPIPC0);
 
-	/* master mode default */
-	set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_MASTER_MASK);
+	/* initialize chip selects */
+	if (pdata->chip_sel) {
+		for (i = 0; i < pdata->num_chipselect; i++) {
+			if (pdata->chip_sel[i] != SPI_INTERN_CS)
+				gpio_direction_output(pdata->chip_sel[i], 1);
+		}
+	}
 
-	if (davinci_spi->pdata->intr_level)
-		iowrite32(SPI_INTLVL_1, davinci_spi->base + SPILVL);
+	if (pdata->intr_line)
+		iowrite32(SPI_INTLVL_1, dspi->base + SPILVL);
 	else
-		iowrite32(SPI_INTLVL_0, davinci_spi->base + SPILVL);
+		iowrite32(SPI_INTLVL_0, dspi->base + SPILVL);
 
-	ret = spi_bitbang_start(&davinci_spi->bitbang);
-	if (ret)
-		goto free_clk;
+	iowrite32(CS_DEFAULT, dspi->base + SPIDEF);
 
-	dev_info(&pdev->dev, "Controller at 0x%p \n", davinci_spi->base);
+	/* master mode default */
+	set_io_bits(dspi->base + SPIGCR1, SPIGCR1_CLKMOD_MASK);
+	set_io_bits(dspi->base + SPIGCR1, SPIGCR1_MASTER_MASK);
+	set_io_bits(dspi->base + SPIGCR1, SPIGCR1_POWERDOWN_MASK);
+
+	ret = spi_bitbang_start(&dspi->bitbang);
+	if (ret)
+		goto free_dma;
 
-	if (!pdata->poll_mode)
-		dev_info(&pdev->dev, "Operating in interrupt mode"
-			" using IRQ %d\n", davinci_spi->irq);
+	dev_info(&pdev->dev, "Controller at 0x%p\n", dspi->base);
 
 	return ret;
 
+free_dma:
+	edma_free_channel(dspi->dma.tx_channel);
+	edma_free_channel(dspi->dma.rx_channel);
+	edma_free_slot(dspi->dma.dummy_param_slot);
 free_clk:
-	clk_disable(davinci_spi->clk);
-	clk_put(davinci_spi->clk);
+	clk_disable(dspi->clk);
+	clk_put(dspi->clk);
 put_master:
 	spi_master_put(master);
-free_tmp_buf:
-	kfree(davinci_spi->tmp_buf);
 irq_free:
-	free_irq(davinci_spi->irq, davinci_spi);
+	free_irq(dspi->irq, dspi);
 unmap_io:
-	iounmap(davinci_spi->base);
+	iounmap(dspi->base);
 release_region:
-	release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
+	release_mem_region(dspi->pbase, resource_size(r));
 free_master:
 	kfree(master);
 err:
@@ -1222,27 +974,31 @@ err:
  */
 static int __exit davinci_spi_remove(struct platform_device *pdev)
 {
-	struct davinci_spi *davinci_spi;
+	struct davinci_spi *dspi;
 	struct spi_master *master;
+	struct resource *r;
 
 	master = dev_get_drvdata(&pdev->dev);
-	davinci_spi = spi_master_get_devdata(master);
+	dspi = spi_master_get_devdata(master);
 
-	spi_bitbang_stop(&davinci_spi->bitbang);
+	spi_bitbang_stop(&dspi->bitbang);
 
-	clk_disable(davinci_spi->clk);
-	clk_put(davinci_spi->clk);
+	clk_disable(dspi->clk);
+	clk_put(dspi->clk);
 	spi_master_put(master);
-	kfree(davinci_spi->tmp_buf);
-	free_irq(davinci_spi->irq, davinci_spi);
-	iounmap(davinci_spi->base);
-	release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
+	free_irq(dspi->irq, dspi);
+	iounmap(dspi->base);
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(dspi->pbase, resource_size(r));
 
 	return 0;
 }
 
 static struct platform_driver davinci_spi_driver = {
-	.driver.name = "spi_davinci",
+	.driver = {
+		.name = "spi_davinci",
+		.owner = THIS_MODULE,
+	},
 	.remove = __exit_p(davinci_spi_remove),
 };
 
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 90439314cf6..22af77f9881 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -164,20 +164,23 @@ static inline void mrst_spi_debugfs_remove(struct dw_spi *dws)
 
 static void wait_till_not_busy(struct dw_spi *dws)
 {
-	unsigned long end = jiffies + 1 + usecs_to_jiffies(1000);
+	unsigned long end = jiffies + 1 + usecs_to_jiffies(5000);
 
 	while (time_before(jiffies, end)) {
 		if (!(dw_readw(dws, sr) & SR_BUSY))
 			return;
+		cpu_relax();
 	}
 	dev_err(&dws->master->dev,
-		"DW SPI: Status keeps busy for 1000us after a read/write!\n");
+		"DW SPI: Status keeps busy for 5000us after a read/write!\n");
 }
 
 static void flush(struct dw_spi *dws)
 {
-	while (dw_readw(dws, sr) & SR_RF_NOT_EMPT)
+	while (dw_readw(dws, sr) & SR_RF_NOT_EMPT) {
 		dw_readw(dws, dr);
+		cpu_relax();
+	}
 
 	wait_till_not_busy(dws);
 }
@@ -285,8 +288,10 @@ static void *next_transfer(struct dw_spi *dws)
  */
 static int map_dma_buffers(struct dw_spi *dws)
 {
-	if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited
-		|| !dws->cur_chip->enable_dma)
+	if (!dws->cur_msg->is_dma_mapped
+		|| !dws->dma_inited
+		|| !dws->cur_chip->enable_dma
+		|| !dws->dma_ops)
 		return 0;
 
 	if (dws->cur_transfer->tx_dma)
@@ -338,7 +343,7 @@ static void int_error_stop(struct dw_spi *dws, const char *msg)
 	tasklet_schedule(&dws->pump_transfers);
 }
 
-static void transfer_complete(struct dw_spi *dws)
+void dw_spi_xfer_done(struct dw_spi *dws)
 {
 	/* Update total byte transfered return count actual bytes read */
 	dws->cur_msg->actual_length += dws->len;
@@ -353,6 +358,7 @@ static void transfer_complete(struct dw_spi *dws)
 	} else
 		tasklet_schedule(&dws->pump_transfers);
 }
+EXPORT_SYMBOL_GPL(dw_spi_xfer_done);
 
 static irqreturn_t interrupt_transfer(struct dw_spi *dws)
 {
@@ -384,7 +390,7 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws)
 		if (dws->tx_end > dws->tx)
 			spi_umask_intr(dws, SPI_INT_TXEI);
 		else
-			transfer_complete(dws);
+			dw_spi_xfer_done(dws);
 	}
 
 	return IRQ_HANDLED;
@@ -413,12 +419,13 @@ static void poll_transfer(struct dw_spi *dws)
 {
 	while (dws->write(dws))
 		dws->read(dws);
+	/*
+	 * There is a possibility that the last word of a transaction
+	 * will be lost if data is not ready. Re-read to solve this issue.
+	 */
+	dws->read(dws);
 
-	transfer_complete(dws);
-}
-
-static void dma_transfer(struct dw_spi *dws, int cs_change)
-{
+	dw_spi_xfer_done(dws);
 }
 
 static void pump_transfers(unsigned long data)
@@ -587,7 +594,7 @@ static void pump_transfers(unsigned long data)
 		spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
 		spi_chip_sel(dws, spi->chip_select);
 
-		/* Set the interrupt mask, for poll mode just diable all int */
+		/* Set the interrupt mask, for poll mode just disable all int */
 		spi_mask_intr(dws, 0xff);
 		if (imask)
 			spi_umask_intr(dws, imask);
@@ -600,7 +607,7 @@ static void pump_transfers(unsigned long data)
 	}
 
 	if (dws->dma_mapped)
-		dma_transfer(dws, cs_change);
+		dws->dma_ops->dma_transfer(dws, cs_change);
 
 	if (chip->poll_mode)
 		poll_transfer(dws);
@@ -896,11 +903,17 @@ int __devinit dw_spi_add_host(struct dw_spi *dws)
 	master->setup = dw_spi_setup;
 	master->transfer = dw_spi_transfer;
 
-	dws->dma_inited = 0;
-
 	/* Basic HW init */
 	spi_hw_init(dws);
 
+	if (dws->dma_ops && dws->dma_ops->dma_init) {
+		ret = dws->dma_ops->dma_init(dws);
+		if (ret) {
+			dev_warn(&master->dev, "DMA init failed\n");
+			dws->dma_inited = 0;
+		}
+	}
+
 	/* Initial and start queue */
 	ret = init_queue(dws);
 	if (ret) {
@@ -925,6 +938,8 @@ int __devinit dw_spi_add_host(struct dw_spi *dws)
 
 err_queue_alloc:
 	destroy_queue(dws);
+	if (dws->dma_ops && dws->dma_ops->dma_exit)
+		dws->dma_ops->dma_exit(dws);
 err_diable_hw:
 	spi_enable_chip(dws, 0);
 	free_irq(dws->irq, dws);
@@ -933,7 +948,7 @@ err_free_master:
 exit:
 	return ret;
 }
-EXPORT_SYMBOL(dw_spi_add_host);
+EXPORT_SYMBOL_GPL(dw_spi_add_host);
 
 void __devexit dw_spi_remove_host(struct dw_spi *dws)
 {
@@ -949,6 +964,8 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws)
 		dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not "
 			"complete, message memory not freed\n");
 
+	if (dws->dma_ops && dws->dma_ops->dma_exit)
+		dws->dma_ops->dma_exit(dws);
 	spi_enable_chip(dws, 0);
 	/* Disable clk */
 	spi_set_clk(dws, 0);
@@ -957,7 +974,7 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws)
 	/* Disconnect from the SPI framework */
 	spi_unregister_master(dws->master);
 }
-EXPORT_SYMBOL(dw_spi_remove_host);
+EXPORT_SYMBOL_GPL(dw_spi_remove_host);
 
 int dw_spi_suspend_host(struct dw_spi *dws)
 {
@@ -970,7 +987,7 @@ int dw_spi_suspend_host(struct dw_spi *dws)
 	spi_set_clk(dws, 0);
 	return ret;
 }
-EXPORT_SYMBOL(dw_spi_suspend_host);
+EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
 
 int dw_spi_resume_host(struct dw_spi *dws)
 {
@@ -982,7 +999,7 @@ int dw_spi_resume_host(struct dw_spi *dws)
 		dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
 	return ret;
 }
-EXPORT_SYMBOL(dw_spi_resume_host);
+EXPORT_SYMBOL_GPL(dw_spi_resume_host);
 
 MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
 MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
diff --git a/drivers/spi/dw_spi_mid.c b/drivers/spi/dw_spi_mid.c
new file mode 100644
index 00000000000..c91c966e071
--- /dev/null
+++ b/drivers/spi/dw_spi_mid.c
@@ -0,0 +1,223 @@
+/*
+ * dw_spi_mid.c - special handling for DW core on Intel MID platform
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/dw_spi.h>
+
+#ifdef CONFIG_SPI_DW_MID_DMA
+#include <linux/intel_mid_dma.h>
+#include <linux/pci.h>
+
+struct mid_dma {
+	struct intel_mid_dma_slave	dmas_tx;
+	struct intel_mid_dma_slave	dmas_rx;
+};
+
+static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
+{
+	struct dw_spi *dws = param;
+
+	return dws->dmac && (&dws->dmac->dev == chan->device->dev);
+}
+
+static int mid_spi_dma_init(struct dw_spi *dws)
+{
+	struct mid_dma *dw_dma = dws->dma_priv;
+	struct intel_mid_dma_slave *rxs, *txs;
+	dma_cap_mask_t mask;
+
+	/*
+	 * Get pci device for DMA controller, currently it could only
+	 * be the DMA controller of either Moorestown or Medfield
+	 */
+	dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL);
+	if (!dws->dmac)
+		dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	/* 1. Init rx channel */
+	dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+	if (!dws->rxchan)
+		goto err_exit;
+	rxs = &dw_dma->dmas_rx;
+	rxs->hs_mode = LNW_DMA_HW_HS;
+	rxs->cfg_mode = LNW_DMA_PER_TO_MEM;
+	dws->rxchan->private = rxs;
+
+	/* 2. Init tx channel */
+	dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+	if (!dws->txchan)
+		goto free_rxchan;
+	txs = &dw_dma->dmas_tx;
+	txs->hs_mode = LNW_DMA_HW_HS;
+	txs->cfg_mode = LNW_DMA_MEM_TO_PER;
+	dws->txchan->private = txs;
+
+	dws->dma_inited = 1;
+	return 0;
+
+free_rxchan:
+	dma_release_channel(dws->rxchan);
+err_exit:
+	return -1;
+
+}
+
+static void mid_spi_dma_exit(struct dw_spi *dws)
+{
+	dma_release_channel(dws->txchan);
+	dma_release_channel(dws->rxchan);
+}
+
+/*
+ * dws->dma_chan_done is cleared before the dma transfer starts,
+ * callback for rx/tx channel will each increment it by 1.
+ * Reaching 2 means the whole spi transaction is done.
+ */
+static void dw_spi_dma_done(void *arg)
+{
+	struct dw_spi *dws = arg;
+
+	if (++dws->dma_chan_done != 2)
+		return;
+	dw_spi_xfer_done(dws);
+}
+
+static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
+{
+	struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL;
+	struct dma_chan *txchan, *rxchan;
+	struct dma_slave_config txconf, rxconf;
+	u16 dma_ctrl = 0;
+
+	/* 1. setup DMA related registers */
+	if (cs_change) {
+		spi_enable_chip(dws, 0);
+		dw_writew(dws, dmardlr, 0xf);
+		dw_writew(dws, dmatdlr, 0x10);
+		if (dws->tx_dma)
+			dma_ctrl |= 0x2;
+		if (dws->rx_dma)
+			dma_ctrl |= 0x1;
+		dw_writew(dws, dmacr, dma_ctrl);
+		spi_enable_chip(dws, 1);
+	}
+
+	dws->dma_chan_done = 0;
+	txchan = dws->txchan;
+	rxchan = dws->rxchan;
+
+	/* 2. Prepare the TX dma transfer */
+	txconf.direction = DMA_TO_DEVICE;
+	txconf.dst_addr = dws->dma_addr;
+	txconf.dst_maxburst = LNW_DMA_MSIZE_16;
+	txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+	txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
+				       (unsigned long) &txconf);
+
+	memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl));
+	dws->tx_sgl.dma_address = dws->tx_dma;
+	dws->tx_sgl.length = dws->len;
+
+	txdesc = txchan->device->device_prep_slave_sg(txchan,
+				&dws->tx_sgl,
+				1,
+				DMA_TO_DEVICE,
+				DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
+	txdesc->callback = dw_spi_dma_done;
+	txdesc->callback_param = dws;
+
+	/* 3. Prepare the RX dma transfer */
+	rxconf.direction = DMA_FROM_DEVICE;
+	rxconf.src_addr = dws->dma_addr;
+	rxconf.src_maxburst = LNW_DMA_MSIZE_16;
+	rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+	rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+	rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
+				       (unsigned long) &rxconf);
+
+	memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl));
+	dws->rx_sgl.dma_address = dws->rx_dma;
+	dws->rx_sgl.length = dws->len;
+
+	rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
+				&dws->rx_sgl,
+				1,
+				DMA_FROM_DEVICE,
+				DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
+	rxdesc->callback = dw_spi_dma_done;
+	rxdesc->callback_param = dws;
+
+	/* rx must be started before tx due to spi instinct */
+	rxdesc->tx_submit(rxdesc);
+	txdesc->tx_submit(txdesc);
+	return 0;
+}
+
+static struct dw_spi_dma_ops mid_dma_ops = {
+	.dma_init	= mid_spi_dma_init,
+	.dma_exit	= mid_spi_dma_exit,
+	.dma_transfer	= mid_spi_dma_transfer,
+};
+#endif
+
+/* Some specific info for SPI0 controller on Moorestown */
+
+/* HW info for MRST CLk Control Unit, one 32b reg */
+#define MRST_SPI_CLK_BASE	100000000	/* 100m */
+#define MRST_CLK_SPI0_REG	0xff11d86c
+#define CLK_SPI_BDIV_OFFSET	0
+#define CLK_SPI_BDIV_MASK	0x00000007
+#define CLK_SPI_CDIV_OFFSET	9
+#define CLK_SPI_CDIV_MASK	0x00000e00
+#define CLK_SPI_DISABLE_OFFSET	8
+
+int dw_spi_mid_init(struct dw_spi *dws)
+{
+	u32 *clk_reg, clk_cdiv;
+
+	clk_reg = ioremap_nocache(MRST_CLK_SPI0_REG, 16);
+	if (!clk_reg)
+		return -ENOMEM;
+
+	/* get SPI controller operating freq info */
+	clk_cdiv  = (readl(clk_reg) & CLK_SPI_CDIV_MASK) >> CLK_SPI_CDIV_OFFSET;
+	dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1);
+	iounmap(clk_reg);
+
+	dws->num_cs = 16;
+	dws->fifo_len = 40;	/* FIFO has 40 words buffer */
+
+#ifdef CONFIG_SPI_DW_MID_DMA
+	dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL);
+	if (!dws->dma_priv)
+		return -ENOMEM;
+	dws->dma_ops = &mid_dma_ops;
+#endif
+	return 0;
+}
diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c
index 1f52755dc87..49ec3aa1219 100644
--- a/drivers/spi/dw_spi_pci.c
+++ b/drivers/spi/dw_spi_pci.c
@@ -1,5 +1,5 @@
 /*
- * mrst_spi_pci.c - PCI interface driver for DW SPI Core
+ * dw_spi_pci.c - PCI interface driver for DW SPI Core
  *
  * Copyright (c) 2009, Intel Corporation.
  *
@@ -26,8 +26,8 @@
 #define DRIVER_NAME "dw_spi_pci"
 
 struct dw_spi_pci {
-	struct pci_dev		*pdev;
-	struct dw_spi		dws;
+	struct pci_dev	*pdev;
+	struct dw_spi	dws;
 };
 
 static int __devinit spi_pci_probe(struct pci_dev *pdev,
@@ -72,9 +72,17 @@ static int __devinit spi_pci_probe(struct pci_dev *pdev,
 	dws->parent_dev = &pdev->dev;
 	dws->bus_num = 0;
 	dws->num_cs = 4;
-	dws->max_freq = 25000000;	/* for Moorestwon */
 	dws->irq = pdev->irq;
-	dws->fifo_len = 40;		/* FIFO has 40 words buffer */
+
+	/*
+	 * Specific handling for Intel MID paltforms, like dma setup,
+	 * clock rate, FIFO depth.
+	 */
+	if (pdev->device == 0x0800) {
+		ret = dw_spi_mid_init(dws);
+		if (ret)
+			goto err_unmap;
+	}
 
 	ret = dw_spi_add_host(dws);
 	if (ret)
@@ -140,7 +148,7 @@ static int spi_resume(struct pci_dev *pdev)
 #endif
 
 static const struct pci_device_id pci_ids[] __devinitdata = {
-	/* Intel Moorestown platform SPI controller 0 */
+	/* Intel MID platform SPI controller 0 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) },
 	{},
 };
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 983fbbfce76..8a904c1c848 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -363,7 +363,7 @@ static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id)
 }
 
 /* bus_num is used only for the case dev->platform_data == NULL */
-static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
+static int __devinit mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
 				u32 size, unsigned int irq, s16 bus_num)
 {
 	struct fsl_spi_platform_data *pdata = dev->platform_data;
@@ -450,22 +450,7 @@ free_master:
 	return ret;
 }
 
-static int __exit mpc52xx_psc_spi_do_remove(struct device *dev)
-{
-	struct spi_master *master = dev_get_drvdata(dev);
-	struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master);
-
-	flush_workqueue(mps->workqueue);
-	destroy_workqueue(mps->workqueue);
-	spi_unregister_master(master);
-	free_irq(mps->irq, mps);
-	if (mps->psc)
-		iounmap(mps->psc);
-
-	return 0;
-}
-
-static int __init mpc52xx_psc_spi_of_probe(struct platform_device *op,
+static int __devinit mpc52xx_psc_spi_of_probe(struct platform_device *op,
 	const struct of_device_id *match)
 {
 	const u32 *regaddr_p;
@@ -495,9 +480,19 @@ static int __init mpc52xx_psc_spi_of_probe(struct platform_device *op,
 				irq_of_parse_and_map(op->dev.of_node, 0), id);
 }
 
-static int __exit mpc52xx_psc_spi_of_remove(struct platform_device *op)
+static int __devexit mpc52xx_psc_spi_of_remove(struct platform_device *op)
 {
-	return mpc52xx_psc_spi_do_remove(&op->dev);
+	struct spi_master *master = dev_get_drvdata(&op->dev);
+	struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master);
+
+	flush_workqueue(mps->workqueue);
+	destroy_workqueue(mps->workqueue);
+	spi_unregister_master(master);
+	free_irq(mps->irq, mps);
+	if (mps->psc)
+		iounmap(mps->psc);
+
+	return 0;
 }
 
 static const struct of_device_id mpc52xx_psc_spi_of_match[] = {
@@ -510,7 +505,7 @@ MODULE_DEVICE_TABLE(of, mpc52xx_psc_spi_of_match);
 
 static struct of_platform_driver mpc52xx_psc_spi_of_driver = {
 	.probe = mpc52xx_psc_spi_of_probe,
-	.remove = __exit_p(mpc52xx_psc_spi_of_remove),
+	.remove = __devexit_p(mpc52xx_psc_spi_of_remove),
 	.driver = {
 		.name = "mpc52xx-psc-spi",
 		.owner = THIS_MODULE,
diff --git a/drivers/spi/mpc52xx_spi.c b/drivers/spi/mpc52xx_spi.c
index ec9f0b1bf86..84439f65560 100644
--- a/drivers/spi/mpc52xx_spi.c
+++ b/drivers/spi/mpc52xx_spi.c
@@ -563,7 +563,7 @@ static struct of_platform_driver mpc52xx_spi_of_driver = {
 		.of_match_table = mpc52xx_spi_match,
 	},
 	.probe = mpc52xx_spi_probe,
-	.remove = __exit_p(mpc52xx_spi_remove),
+	.remove = __devexit_p(mpc52xx_spi_remove),
 };
 
 static int __init mpc52xx_spi_init(void)
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index 2a651e61bfb..abb1ffbf3d2 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -397,7 +397,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 
 	if (tx != NULL) {
 		wait_for_completion(&mcspi_dma->dma_tx_completion);
-		dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE);
+		dma_unmap_single(&spi->dev, xfer->tx_dma, count, DMA_TO_DEVICE);
 
 		/* for TX_ONLY mode, be sure all words have shifted out */
 		if (rx == NULL) {
@@ -412,7 +412,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 
 	if (rx != NULL) {
 		wait_for_completion(&mcspi_dma->dma_rx_completion);
-		dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE);
+		dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE);
 		omap2_mcspi_set_enable(spi, 0);
 
 		if (l & OMAP2_MCSPI_CHCONF_TURBO) {
@@ -1025,11 +1025,6 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
 		if (m->is_dma_mapped || len < DMA_MIN_BYTES)
 			continue;
 
-		/* Do DMA mapping "early" for better error reporting and
-		 * dcache use.  Note that if dma_unmap_single() ever starts
-		 * to do real work on ARM, we'd need to clean up mappings
-		 * for previous transfers on *ALL* exits of this loop...
-		 */
 		if (tx_buf != NULL) {
 			t->tx_dma = dma_map_single(&spi->dev, (void *) tx_buf,
 					len, DMA_TO_DEVICE);
@@ -1046,7 +1041,7 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
 				dev_dbg(&spi->dev, "dma %cX %d bytes error\n",
 						'R', len);
 				if (tx_buf != NULL)
-					dma_unmap_single(NULL, t->tx_dma,
+					dma_unmap_single(&spi->dev, t->tx_dma,
 							len, DMA_TO_DEVICE);
 				return -EINVAL;
 			}
@@ -1305,10 +1300,49 @@ static int __exit omap2_mcspi_remove(struct platform_device *pdev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:omap2_mcspi");
 
+#ifdef	CONFIG_SUSPEND
+/*
+ * When SPI wake up from off-mode, CS is in activate state. If it was in
+ * unactive state when driver was suspend, then force it to unactive state at
+ * wake up.
+ */
+static int omap2_mcspi_resume(struct device *dev)
+{
+	struct spi_master	*master = dev_get_drvdata(dev);
+	struct omap2_mcspi	*mcspi = spi_master_get_devdata(master);
+	struct omap2_mcspi_cs *cs;
+
+	omap2_mcspi_enable_clocks(mcspi);
+	list_for_each_entry(cs, &omap2_mcspi_ctx[master->bus_num - 1].cs,
+			    node) {
+		if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) {
+
+			/*
+			 * We need to toggle CS state for OMAP take this
+			 * change in account.
+			 */
+			MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 1);
+			__raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+			MOD_REG_BIT(cs->chconf0, OMAP2_MCSPI_CHCONF_FORCE, 0);
+			__raw_writel(cs->chconf0, cs->base + OMAP2_MCSPI_CHCONF0);
+		}
+	}
+	omap2_mcspi_disable_clocks(mcspi);
+	return 0;
+}
+#else
+#define	omap2_mcspi_resume	NULL
+#endif
+
+static const struct dev_pm_ops omap2_mcspi_pm_ops = {
+	.resume = omap2_mcspi_resume,
+};
+
 static struct platform_driver omap2_mcspi_driver = {
 	.driver = {
 		.name =		"omap2_mcspi",
 		.owner =	THIS_MODULE,
+		.pm =		&omap2_mcspi_pm_ops
 	},
 	.remove =	__exit_p(omap2_mcspi_remove),
 };
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index e76b1afafe0..95928833855 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -23,11 +23,11 @@
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/spi/pxa2xx_spi.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
 #include <linux/workqueue.h>
 #include <linux/delay.h>
-#include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
 
@@ -35,9 +35,6 @@
 #include <asm/irq.h>
 #include <asm/delay.h>
 
-#include <mach/dma.h>
-#include <plat/ssp.h>
-#include <mach/pxa2xx_spi.h>
 
 MODULE_AUTHOR("Stephen Street");
 MODULE_DESCRIPTION("PXA2xx SSP SPI Controller");
@@ -46,8 +43,6 @@ MODULE_ALIAS("platform:pxa2xx-spi");
 
 #define MAX_BUSES 3
 
-#define RX_THRESH_DFLT 	8
-#define TX_THRESH_DFLT 	8
 #define TIMOUT_DFLT		1000
 
 #define DMA_INT_MASK		(DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
@@ -168,7 +163,10 @@ struct chip_data {
 	u8 enable_dma;
 	u8 bits_per_word;
 	u32 speed_hz;
-	int gpio_cs;
+	union {
+		int gpio_cs;
+		unsigned int frm;
+	};
 	int gpio_cs_inverted;
 	int (*write)(struct driver_data *drv_data);
 	int (*read)(struct driver_data *drv_data);
@@ -181,6 +179,11 @@ static void cs_assert(struct driver_data *drv_data)
 {
 	struct chip_data *chip = drv_data->cur_chip;
 
+	if (drv_data->ssp_type == CE4100_SSP) {
+		write_SSSR(drv_data->cur_chip->frm, drv_data->ioaddr);
+		return;
+	}
+
 	if (chip->cs_control) {
 		chip->cs_control(PXA2XX_CS_ASSERT);
 		return;
@@ -194,6 +197,9 @@ static void cs_deassert(struct driver_data *drv_data)
 {
 	struct chip_data *chip = drv_data->cur_chip;
 
+	if (drv_data->ssp_type == CE4100_SSP)
+		return;
+
 	if (chip->cs_control) {
 		chip->cs_control(PXA2XX_CS_DEASSERT);
 		return;
@@ -203,6 +209,25 @@ static void cs_deassert(struct driver_data *drv_data)
 		gpio_set_value(chip->gpio_cs, !chip->gpio_cs_inverted);
 }
 
+static void write_SSSR_CS(struct driver_data *drv_data, u32 val)
+{
+	void __iomem *reg = drv_data->ioaddr;
+
+	if (drv_data->ssp_type == CE4100_SSP)
+		val |= read_SSSR(reg) & SSSR_ALT_FRM_MASK;
+
+	write_SSSR(val, reg);
+}
+
+static int pxa25x_ssp_comp(struct driver_data *drv_data)
+{
+	if (drv_data->ssp_type == PXA25x_SSP)
+		return 1;
+	if (drv_data->ssp_type == CE4100_SSP)
+		return 1;
+	return 0;
+}
+
 static int flush(struct driver_data *drv_data)
 {
 	unsigned long limit = loops_per_jiffy << 1;
@@ -214,7 +239,7 @@ static int flush(struct driver_data *drv_data)
 			read_SSDR(reg);
 		}
 	} while ((read_SSSR(reg) & SSSR_BSY) && --limit);
-	write_SSSR(SSSR_ROR, reg);
+	write_SSSR_CS(drv_data, SSSR_ROR);
 
 	return limit;
 }
@@ -224,7 +249,7 @@ static int null_writer(struct driver_data *drv_data)
 	void __iomem *reg = drv_data->ioaddr;
 	u8 n_bytes = drv_data->n_bytes;
 
-	if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+	if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
 		|| (drv_data->tx == drv_data->tx_end))
 		return 0;
 
@@ -252,7 +277,7 @@ static int u8_writer(struct driver_data *drv_data)
 {
 	void __iomem *reg = drv_data->ioaddr;
 
-	if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+	if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
 		|| (drv_data->tx == drv_data->tx_end))
 		return 0;
 
@@ -279,7 +304,7 @@ static int u16_writer(struct driver_data *drv_data)
 {
 	void __iomem *reg = drv_data->ioaddr;
 
-	if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+	if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
 		|| (drv_data->tx == drv_data->tx_end))
 		return 0;
 
@@ -306,7 +331,7 @@ static int u32_writer(struct driver_data *drv_data)
 {
 	void __iomem *reg = drv_data->ioaddr;
 
-	if (((read_SSSR(reg) & 0x00000f00) == 0x00000f00)
+	if (((read_SSSR(reg) & SSSR_TFL_MASK) == SSSR_TFL_MASK)
 		|| (drv_data->tx == drv_data->tx_end))
 		return 0;
 
@@ -507,9 +532,9 @@ static void dma_error_stop(struct driver_data *drv_data, const char *msg)
 	/* Stop and reset */
 	DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
 	DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
-	write_SSSR(drv_data->clear_sr, reg);
+	write_SSSR_CS(drv_data, drv_data->clear_sr);
 	write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
-	if (drv_data->ssp_type != PXA25x_SSP)
+	if (!pxa25x_ssp_comp(drv_data))
 		write_SSTO(0, reg);
 	flush(drv_data);
 	write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
@@ -529,7 +554,7 @@ static void dma_transfer_complete(struct driver_data *drv_data)
 
 	/* Clear and disable interrupts on SSP and DMA channels*/
 	write_SSCR1(read_SSCR1(reg) & ~drv_data->dma_cr1, reg);
-	write_SSSR(drv_data->clear_sr, reg);
+	write_SSSR_CS(drv_data, drv_data->clear_sr);
 	DCSR(drv_data->tx_channel) = RESET_DMA_CHANNEL;
 	DCSR(drv_data->rx_channel) = RESET_DMA_CHANNEL;
 
@@ -622,7 +647,7 @@ static irqreturn_t dma_transfer(struct driver_data *drv_data)
 
 		/* Clear and disable timeout interrupt, do the rest in
 		 * dma_transfer_complete */
-		if (drv_data->ssp_type != PXA25x_SSP)
+		if (!pxa25x_ssp_comp(drv_data))
 			write_SSTO(0, reg);
 
 		/* finish this transfer, start the next */
@@ -635,14 +660,26 @@ static irqreturn_t dma_transfer(struct driver_data *drv_data)
 	return IRQ_NONE;
 }
 
+static void reset_sccr1(struct driver_data *drv_data)
+{
+	void __iomem *reg = drv_data->ioaddr;
+	struct chip_data *chip = drv_data->cur_chip;
+	u32 sccr1_reg;
+
+	sccr1_reg = read_SSCR1(reg) & ~drv_data->int_cr1;
+	sccr1_reg &= ~SSCR1_RFT;
+	sccr1_reg |= chip->threshold;
+	write_SSCR1(sccr1_reg, reg);
+}
+
 static void int_error_stop(struct driver_data *drv_data, const char* msg)
 {
 	void __iomem *reg = drv_data->ioaddr;
 
 	/* Stop and reset SSP */
-	write_SSSR(drv_data->clear_sr, reg);
-	write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
-	if (drv_data->ssp_type != PXA25x_SSP)
+	write_SSSR_CS(drv_data, drv_data->clear_sr);
+	reset_sccr1(drv_data);
+	if (!pxa25x_ssp_comp(drv_data))
 		write_SSTO(0, reg);
 	flush(drv_data);
 	write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
@@ -658,9 +695,9 @@ static void int_transfer_complete(struct driver_data *drv_data)
 	void __iomem *reg = drv_data->ioaddr;
 
 	/* Stop SSP */
-	write_SSSR(drv_data->clear_sr, reg);
-	write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
-	if (drv_data->ssp_type != PXA25x_SSP)
+	write_SSSR_CS(drv_data, drv_data->clear_sr);
+	reset_sccr1(drv_data);
+	if (!pxa25x_ssp_comp(drv_data))
 		write_SSTO(0, reg);
 
 	/* Update total byte transfered return count actual bytes read */
@@ -714,24 +751,34 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
 	}
 
 	if (drv_data->tx == drv_data->tx_end) {
-		write_SSCR1(read_SSCR1(reg) & ~SSCR1_TIE, reg);
-		/* PXA25x_SSP has no timeout, read trailing bytes */
-		if (drv_data->ssp_type == PXA25x_SSP) {
-			if (!wait_ssp_rx_stall(reg))
-			{
-				int_error_stop(drv_data, "interrupt_transfer: "
-						"rx stall failed");
-				return IRQ_HANDLED;
-			}
-			if (!drv_data->read(drv_data))
-			{
-				int_error_stop(drv_data,
-						"interrupt_transfer: "
-						"trailing byte read failed");
-				return IRQ_HANDLED;
+		u32 bytes_left;
+		u32 sccr1_reg;
+
+		sccr1_reg = read_SSCR1(reg);
+		sccr1_reg &= ~SSCR1_TIE;
+
+		/*
+		 * PXA25x_SSP has no timeout, set up rx threshould for the
+		 * remaing RX bytes.
+		 */
+		if (pxa25x_ssp_comp(drv_data)) {
+
+			sccr1_reg &= ~SSCR1_RFT;
+
+			bytes_left = drv_data->rx_end - drv_data->rx;
+			switch (drv_data->n_bytes) {
+			case 4:
+				bytes_left >>= 1;
+			case 2:
+				bytes_left >>= 1;
 			}
-			int_transfer_complete(drv_data);
+
+			if (bytes_left > RX_THRESH_DFLT)
+				bytes_left = RX_THRESH_DFLT;
+
+			sccr1_reg |= SSCR1_RxTresh(bytes_left);
 		}
+		write_SSCR1(sccr1_reg, reg);
 	}
 
 	/* We did something */
@@ -742,14 +789,26 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
 {
 	struct driver_data *drv_data = dev_id;
 	void __iomem *reg = drv_data->ioaddr;
+	u32 sccr1_reg = read_SSCR1(reg);
+	u32 mask = drv_data->mask_sr;
+	u32 status;
+
+	status = read_SSSR(reg);
+
+	/* Ignore possible writes if we don't need to write */
+	if (!(sccr1_reg & SSCR1_TIE))
+		mask &= ~SSSR_TFS;
+
+	if (!(status & mask))
+		return IRQ_NONE;
 
 	if (!drv_data->cur_msg) {
 
 		write_SSCR0(read_SSCR0(reg) & ~SSCR0_SSE, reg);
 		write_SSCR1(read_SSCR1(reg) & ~drv_data->int_cr1, reg);
-		if (drv_data->ssp_type != PXA25x_SSP)
+		if (!pxa25x_ssp_comp(drv_data))
 			write_SSTO(0, reg);
-		write_SSSR(drv_data->clear_sr, reg);
+		write_SSSR_CS(drv_data, drv_data->clear_sr);
 
 		dev_err(&drv_data->pdev->dev, "bad message state "
 			"in interrupt handler\n");
@@ -862,7 +921,7 @@ static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
 {
 	unsigned long ssp_clk = clk_get_rate(ssp->clk);
 
-	if (ssp->type == PXA25x_SSP)
+	if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
 		return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
 	else
 		return ((ssp_clk / rate - 1) & 0xfff) << 8;
@@ -1088,7 +1147,7 @@ static void pump_transfers(unsigned long data)
 
 		/* Clear status  */
 		cr1 = chip->cr1 | chip->threshold | drv_data->int_cr1;
-		write_SSSR(drv_data->clear_sr, reg);
+		write_SSSR_CS(drv_data, drv_data->clear_sr);
 	}
 
 	/* see if we need to reload the config registers */
@@ -1098,7 +1157,7 @@ static void pump_transfers(unsigned long data)
 
 		/* stop the SSP, and update the other bits */
 		write_SSCR0(cr0 & ~SSCR0_SSE, reg);
-		if (drv_data->ssp_type != PXA25x_SSP)
+		if (!pxa25x_ssp_comp(drv_data))
 			write_SSTO(chip->timeout, reg);
 		/* first set CR1 without interrupt and service enables */
 		write_SSCR1(cr1 & SSCR1_CHANGE_MASK, reg);
@@ -1106,7 +1165,7 @@ static void pump_transfers(unsigned long data)
 		write_SSCR0(cr0, reg);
 
 	} else {
-		if (drv_data->ssp_type != PXA25x_SSP)
+		if (!pxa25x_ssp_comp(drv_data))
 			write_SSTO(chip->timeout, reg);
 	}
 
@@ -1233,14 +1292,13 @@ static int setup(struct spi_device *spi)
 	uint tx_thres = TX_THRESH_DFLT;
 	uint rx_thres = RX_THRESH_DFLT;
 
-	if (drv_data->ssp_type != PXA25x_SSP
+	if (!pxa25x_ssp_comp(drv_data)
 		&& (spi->bits_per_word < 4 || spi->bits_per_word > 32)) {
 		dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
 				"b/w not 4-32 for type non-PXA25x_SSP\n",
 				drv_data->ssp_type, spi->bits_per_word);
 		return -EINVAL;
-	}
-	else if (drv_data->ssp_type == PXA25x_SSP
+	} else if (pxa25x_ssp_comp(drv_data)
 			&& (spi->bits_per_word < 4
 				|| spi->bits_per_word > 16)) {
 		dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
@@ -1259,7 +1317,17 @@ static int setup(struct spi_device *spi)
 			return -ENOMEM;
 		}
 
-		chip->gpio_cs = -1;
+		if (drv_data->ssp_type == CE4100_SSP) {
+			if (spi->chip_select > 4) {
+				dev_err(&spi->dev, "failed setup: "
+				"cs number must not be > 4.\n");
+				kfree(chip);
+				return -EINVAL;
+			}
+
+			chip->frm = spi->chip_select;
+		} else
+			chip->gpio_cs = -1;
 		chip->enable_dma = 0;
 		chip->timeout = TIMOUT_DFLT;
 		chip->dma_burst_size = drv_data->master_info->enable_dma ?
@@ -1315,7 +1383,7 @@ static int setup(struct spi_device *spi)
 			| (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
 
 	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
-	if (drv_data->ssp_type != PXA25x_SSP)
+	if (!pxa25x_ssp_comp(drv_data))
 		dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
 			clk_get_rate(ssp->clk)
 				/ (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)),
@@ -1350,23 +1418,27 @@ static int setup(struct spi_device *spi)
 
 	spi_set_ctldata(spi, chip);
 
+	if (drv_data->ssp_type == CE4100_SSP)
+		return 0;
+
 	return setup_cs(spi, chip, chip_info);
 }
 
 static void cleanup(struct spi_device *spi)
 {
 	struct chip_data *chip = spi_get_ctldata(spi);
+	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
 
 	if (!chip)
 		return;
 
-	if (gpio_is_valid(chip->gpio_cs))
+	if (drv_data->ssp_type != CE4100_SSP && gpio_is_valid(chip->gpio_cs))
 		gpio_free(chip->gpio_cs);
 
 	kfree(chip);
 }
 
-static int __init init_queue(struct driver_data *drv_data)
+static int __devinit init_queue(struct driver_data *drv_data)
 {
 	INIT_LIST_HEAD(&drv_data->queue);
 	spin_lock_init(&drv_data->lock);
@@ -1454,7 +1526,7 @@ static int destroy_queue(struct driver_data *drv_data)
 	return 0;
 }
 
-static int __init pxa2xx_spi_probe(struct platform_device *pdev)
+static int __devinit pxa2xx_spi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct pxa2xx_spi_master *platform_info;
@@ -1484,6 +1556,10 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 	drv_data->pdev = pdev;
 	drv_data->ssp = ssp;
 
+	master->dev.parent = &pdev->dev;
+#ifdef CONFIG_OF
+	master->dev.of_node = pdev->dev.of_node;
+#endif
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 
@@ -1500,7 +1576,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 
 	drv_data->ioaddr = ssp->mmio_base;
 	drv_data->ssdr_physical = ssp->phys_base + SSDR;
-	if (ssp->type == PXA25x_SSP) {
+	if (pxa25x_ssp_comp(drv_data)) {
 		drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
 		drv_data->dma_cr1 = 0;
 		drv_data->clear_sr = SSSR_ROR;
@@ -1512,7 +1588,8 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 		drv_data->mask_sr = SSSR_TINT | SSSR_RFS | SSSR_TFS | SSSR_ROR;
 	}
 
-	status = request_irq(ssp->irq, ssp_int, 0, dev_name(dev), drv_data);
+	status = request_irq(ssp->irq, ssp_int, IRQF_SHARED, dev_name(dev),
+			drv_data);
 	if (status < 0) {
 		dev_err(&pdev->dev, "cannot get IRQ %d\n", ssp->irq);
 		goto out_error_master_alloc;
@@ -1561,7 +1638,7 @@ static int __init pxa2xx_spi_probe(struct platform_device *pdev)
 			| SSCR0_Motorola
 			| SSCR0_DataSize(8),
 			drv_data->ioaddr);
-	if (drv_data->ssp_type != PXA25x_SSP)
+	if (!pxa25x_ssp_comp(drv_data))
 		write_SSTO(0, drv_data->ioaddr);
 	write_SSPSP(0, drv_data->ioaddr);
 
@@ -1723,13 +1800,14 @@ static struct platform_driver driver = {
 		.pm	= &pxa2xx_spi_pm_ops,
 #endif
 	},
+	.probe = pxa2xx_spi_probe,
 	.remove = pxa2xx_spi_remove,
 	.shutdown = pxa2xx_spi_shutdown,
 };
 
 static int __init pxa2xx_spi_init(void)
 {
-	return platform_driver_probe(&driver, pxa2xx_spi_probe);
+	return platform_driver_register(&driver);
 }
 subsys_initcall(pxa2xx_spi_init);
 
diff --git a/drivers/spi/pxa2xx_spi_pci.c b/drivers/spi/pxa2xx_spi_pci.c
new file mode 100644
index 00000000000..351d8a375b5
--- /dev/null
+++ b/drivers/spi/pxa2xx_spi_pci.c
@@ -0,0 +1,201 @@
+/*
+ * CE4100's SPI device is more or less the same one as found on PXA
+ *
+ */
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/spi/pxa2xx_spi.h>
+
+struct awesome_struct {
+	struct ssp_device ssp;
+	struct platform_device spi_pdev;
+	struct pxa2xx_spi_master spi_pdata;
+};
+
+static DEFINE_MUTEX(ssp_lock);
+static LIST_HEAD(ssp_list);
+
+struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+	struct ssp_device *ssp = NULL;
+
+	mutex_lock(&ssp_lock);
+
+	list_for_each_entry(ssp, &ssp_list, node) {
+		if (ssp->port_id == port && ssp->use_count == 0) {
+			ssp->use_count++;
+			ssp->label = label;
+			break;
+		}
+	}
+
+	mutex_unlock(&ssp_lock);
+
+	if (&ssp->node == &ssp_list)
+		return NULL;
+
+	return ssp;
+}
+EXPORT_SYMBOL_GPL(pxa_ssp_request);
+
+void pxa_ssp_free(struct ssp_device *ssp)
+{
+	mutex_lock(&ssp_lock);
+	if (ssp->use_count) {
+		ssp->use_count--;
+		ssp->label = NULL;
+	} else
+		dev_err(&ssp->pdev->dev, "device already free\n");
+	mutex_unlock(&ssp_lock);
+}
+EXPORT_SYMBOL_GPL(pxa_ssp_free);
+
+static void plat_dev_release(struct device *dev)
+{
+	struct awesome_struct *as = container_of(dev,
+			struct awesome_struct, spi_pdev.dev);
+
+	of_device_node_put(&as->spi_pdev.dev);
+}
+
+static int __devinit ce4100_spi_probe(struct pci_dev *dev,
+		const struct pci_device_id *ent)
+{
+	int ret;
+	resource_size_t phys_beg;
+	resource_size_t phys_len;
+	struct awesome_struct *spi_info;
+	struct platform_device *pdev;
+	struct pxa2xx_spi_master *spi_pdata;
+	struct ssp_device *ssp;
+
+	ret = pci_enable_device(dev);
+	if (ret)
+		return ret;
+
+	phys_beg = pci_resource_start(dev, 0);
+	phys_len = pci_resource_len(dev, 0);
+
+	if (!request_mem_region(phys_beg, phys_len,
+				"CE4100 SPI")) {
+		dev_err(&dev->dev, "Can't request register space.\n");
+		ret = -EBUSY;
+		return ret;
+	}
+
+	spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL);
+	if (!spi_info) {
+		ret = -ENOMEM;
+		goto err_kz;
+	}
+	ssp = &spi_info->ssp;
+	pdev = &spi_info->spi_pdev;
+	spi_pdata =  &spi_info->spi_pdata;
+
+	pdev->name = "pxa2xx-spi";
+	pdev->id = dev->devfn;
+	pdev->dev.parent = &dev->dev;
+	pdev->dev.platform_data = &spi_info->spi_pdata;
+
+#ifdef CONFIG_OF
+	pdev->dev.of_node = dev->dev.of_node;
+#endif
+	pdev->dev.release = plat_dev_release;
+
+	spi_pdata->num_chipselect = dev->devfn;
+
+	ssp->phys_base = pci_resource_start(dev, 0);
+	ssp->mmio_base = ioremap(phys_beg, phys_len);
+	if (!ssp->mmio_base) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -EIO;
+		goto err_remap;
+	}
+	ssp->irq = dev->irq;
+	ssp->port_id = pdev->id;
+	ssp->type = PXA25x_SSP;
+
+	mutex_lock(&ssp_lock);
+	list_add(&ssp->node, &ssp_list);
+	mutex_unlock(&ssp_lock);
+
+	pci_set_drvdata(dev, spi_info);
+
+	ret = platform_device_register(pdev);
+	if (ret)
+		goto err_dev_add;
+
+	return ret;
+
+err_dev_add:
+	pci_set_drvdata(dev, NULL);
+	mutex_lock(&ssp_lock);
+	list_del(&ssp->node);
+	mutex_unlock(&ssp_lock);
+	iounmap(ssp->mmio_base);
+
+err_remap:
+	kfree(spi_info);
+
+err_kz:
+	release_mem_region(phys_beg, phys_len);
+
+	return ret;
+}
+
+static void __devexit ce4100_spi_remove(struct pci_dev *dev)
+{
+	struct awesome_struct *spi_info;
+	struct platform_device *pdev;
+	struct ssp_device *ssp;
+
+	spi_info = pci_get_drvdata(dev);
+
+	ssp = &spi_info->ssp;
+	pdev = &spi_info->spi_pdev;
+
+	platform_device_unregister(pdev);
+
+	iounmap(ssp->mmio_base);
+	release_mem_region(pci_resource_start(dev, 0),
+			pci_resource_len(dev, 0));
+
+	mutex_lock(&ssp_lock);
+	list_del(&ssp->node);
+	mutex_unlock(&ssp_lock);
+
+	pci_set_drvdata(dev, NULL);
+	pci_disable_device(dev);
+	kfree(spi_info);
+}
+
+static struct pci_device_id ce4100_spi_devices[] __devinitdata = {
+
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) },
+	{ },
+};
+MODULE_DEVICE_TABLE(pci, ce4100_spi_devices);
+
+static struct pci_driver ce4100_spi_driver = {
+	.name           = "ce4100_spi",
+	.id_table       = ce4100_spi_devices,
+	.probe          = ce4100_spi_probe,
+	.remove         = __devexit_p(ce4100_spi_remove),
+};
+
+static int __init ce4100_spi_init(void)
+{
+	return pci_register_driver(&ce4100_spi_driver);
+}
+module_init(ce4100_spi_init);
+
+static void __exit ce4100_spi_exit(void)
+{
+	pci_unregister_driver(&ce4100_spi_driver);
+}
+module_exit(ce4100_spi_exit);
+
+MODULE_DESCRIPTION("CE4100 PCI-SPI glue code for PXA's driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 709c836607d..b02d0cbce89 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -584,8 +584,7 @@ void spi_unregister_master(struct spi_master *master)
 	list_del(&master->list);
 	mutex_unlock(&board_lock);
 
-	dummy = device_for_each_child(master->dev.parent, &master->dev,
-					__unregister);
+	dummy = device_for_each_child(&master->dev, NULL, __unregister);
 	device_unregister(&master->dev);
 }
 EXPORT_SYMBOL_GPL(spi_unregister_master);
diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c
index e3b4f645196..a99e2333b94 100644
--- a/drivers/spi/spi_fsl_espi.c
+++ b/drivers/spi/spi_fsl_espi.c
@@ -258,18 +258,18 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
 	return mpc8xxx_spi->count;
 }
 
-static void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd)
+static inline void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd)
 {
-	if (cmd[1] && cmd[2] && cmd[3]) {
+	if (cmd) {
 		cmd[1] = (u8)(addr >> 16);
 		cmd[2] = (u8)(addr >> 8);
 		cmd[3] = (u8)(addr >> 0);
 	}
 }
 
-static unsigned int fsl_espi_cmd2addr(u8 *cmd)
+static inline unsigned int fsl_espi_cmd2addr(u8 *cmd)
 {
-	if (cmd[1] && cmd[2] && cmd[3])
+	if (cmd)
 		return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0;
 
 	return 0;
@@ -395,9 +395,11 @@ static void fsl_espi_rw_trans(struct spi_message *m,
 			}
 		}
 
-		addr = fsl_espi_cmd2addr(local_buf);
-		addr += pos;
-		fsl_espi_addr2cmd(addr, local_buf);
+		if (pos > 0) {
+			addr = fsl_espi_cmd2addr(local_buf);
+			addr += pos;
+			fsl_espi_addr2cmd(addr, local_buf);
+		}
 
 		espi_trans->n_tx = n_tx;
 		espi_trans->n_rx = trans_len;
@@ -507,16 +509,29 @@ void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
 
 	/* We need handle RX first */
 	if (events & SPIE_NE) {
-		u32 rx_data;
+		u32 rx_data, tmp;
+		u8 rx_data_8;
 
 		/* Spin until RX is done */
 		while (SPIE_RXCNT(events) < min(4, mspi->len)) {
 			cpu_relax();
 			events = mpc8xxx_spi_read_reg(&reg_base->event);
 		}
-		mspi->len -= 4;
 
-		rx_data = mpc8xxx_spi_read_reg(&reg_base->receive);
+		if (mspi->len >= 4) {
+			rx_data = mpc8xxx_spi_read_reg(&reg_base->receive);
+		} else {
+			tmp = mspi->len;
+			rx_data = 0;
+			while (tmp--) {
+				rx_data_8 = in_8((u8 *)&reg_base->receive);
+				rx_data |= (rx_data_8 << (tmp * 8));
+			}
+
+			rx_data <<= (4 - mspi->len) * 8;
+		}
+
+		mspi->len -= 4;
 
 		if (mspi->rx)
 			mspi->get_rx(rx_data, mspi);
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index 55a38e2c6c1..9469564e688 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -66,7 +66,6 @@ enum spi_imx_devtype {
 	SPI_IMX_VER_0_5,
 	SPI_IMX_VER_0_7,
 	SPI_IMX_VER_2_3,
-	SPI_IMX_VER_AUTODETECT,
 };
 
 struct spi_imx_data;
@@ -720,9 +719,6 @@ static void spi_imx_cleanup(struct spi_device *spi)
 
 static struct platform_device_id spi_imx_devtype[] = {
 	{
-		.name = DRIVER_NAME,
-		.driver_data = SPI_IMX_VER_AUTODETECT,
-	}, {
 		.name = "imx1-cspi",
 		.driver_data = SPI_IMX_VER_IMX1,
 	}, {
@@ -802,30 +798,8 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 
 	init_completion(&spi_imx->xfer_done);
 
-	if (pdev->id_entry->driver_data == SPI_IMX_VER_AUTODETECT) {
-		if (cpu_is_mx25() || cpu_is_mx35())
-			spi_imx->devtype_data =
-				spi_imx_devtype_data[SPI_IMX_VER_0_7];
-		else if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35())
-			spi_imx->devtype_data =
-				spi_imx_devtype_data[SPI_IMX_VER_0_4];
-		else if (cpu_is_mx27() || cpu_is_mx21())
-			spi_imx->devtype_data =
-				spi_imx_devtype_data[SPI_IMX_VER_0_0];
-		else if (cpu_is_mx1())
-			spi_imx->devtype_data =
-				spi_imx_devtype_data[SPI_IMX_VER_IMX1];
-		else
-			BUG();
-	} else
-		spi_imx->devtype_data =
-			spi_imx_devtype_data[pdev->id_entry->driver_data];
-
-	if (!spi_imx->devtype_data.intctrl) {
-		dev_err(&pdev->dev, "no support for this device compiled in\n");
-		ret = -ENODEV;
-		goto out_gpio_free;
-	}
+	spi_imx->devtype_data =
+		spi_imx_devtype_data[pdev->id_entry->driver_data];
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
@@ -847,7 +821,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
 	}
 
 	spi_imx->irq = platform_get_irq(pdev, 0);
-	if (spi_imx->irq <= 0) {
+	if (spi_imx->irq < 0) {
 		ret = -EINVAL;
 		goto out_iounmap;
 	}
diff --git a/drivers/spi/spi_nuc900.c b/drivers/spi/spi_nuc900.c
index dff63be0d0a..d5be18b3078 100644
--- a/drivers/spi/spi_nuc900.c
+++ b/drivers/spi/spi_nuc900.c
@@ -449,7 +449,7 @@ err_iomap:
 	release_mem_region(hw->res->start, resource_size(hw->res));
 	kfree(hw->ioarea);
 err_pdata:
-	spi_master_put(hw->master);;
+	spi_master_put(hw->master);
 
 err_nomem:
 	return err;
diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c
index 58e187f45ec..79e48d45113 100644
--- a/drivers/spi/spi_topcliff_pch.c
+++ b/drivers/spi/spi_topcliff_pch.c
@@ -267,7 +267,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
 	if (reg_spsr_val & SPSR_FI_BIT) {
 		/* disable FI & RFI interrupts */
 		pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
-				   SPCR_FIE_BIT | SPCR_TFIE_BIT);
+				   SPCR_FIE_BIT | SPCR_RFIE_BIT);
 
 		/* transfer is completed;inform pch_spi_process_messages */
 		data->transfer_complete = true;
@@ -677,15 +677,15 @@ static void pch_spi_set_ir(struct pch_spi_data *data)
 {
 	/* enable interrupts */
 	if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) {
-		/* set receive threhold to PCH_RX_THOLD */
+		/* set receive threshold to PCH_RX_THOLD */
 		pch_spi_setclr_reg(data->master, PCH_SPCR,
-				   PCH_RX_THOLD << SPCR_TFIC_FIELD,
-				   ~MASK_TFIC_SPCR_BITS);
+				   PCH_RX_THOLD << SPCR_RFIC_FIELD,
+				   ~MASK_RFIC_SPCR_BITS);
 		/* enable FI and RFI interrupts */
 		pch_spi_setclr_reg(data->master, PCH_SPCR,
-				   SPCR_RFIE_BIT | SPCR_TFIE_BIT, 0);
+				   SPCR_RFIE_BIT | SPCR_FIE_BIT, 0);
 	} else {
-		/* set receive threhold to maximum */
+		/* set receive threshold to maximum */
 		pch_spi_setclr_reg(data->master, PCH_SPCR,
 				   PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD,
 				   ~MASK_TFIC_SPCR_BITS);
diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 80f2db5bcfd..7adaef62a99 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -1,26 +1,27 @@
 /*
- * xilinx_spi.c
- *
  * Xilinx SPI controller driver (master mode only)
  *
  * Author: MontaVista Software, Inc.
  *	source@mvista.com
  *
- * 2002-2007 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
+ * Copyright (c) 2010 Secret Lab Technologies, Ltd.
+ * Copyright (c) 2009 Intel Corporation
+ * 2002-2007 (c) MontaVista Software, Inc.
+
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  */
 
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-
+#include <linux/of.h>
+#include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
-#include <linux/io.h>
-
-#include "xilinx_spi.h"
 #include <linux/spi/xilinx_spi.h>
+#include <linux/io.h>
 
 #define XILINX_SPI_NAME "xilinx_spi"
 
@@ -350,19 +351,22 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id xilinx_spi_of_match[] = {
+	{ .compatible = "xlnx,xps-spi-2.00.a", },
+	{ .compatible = "xlnx,xps-spi-2.00.b", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
+#endif
+
 struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
-	u32 irq, s16 bus_num)
+	u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word)
 {
 	struct spi_master *master;
 	struct xilinx_spi *xspi;
-	struct xspi_platform_data *pdata = dev->platform_data;
 	int ret;
 
-	if (!pdata) {
-		dev_err(dev, "No platform data attached\n");
-		return NULL;
-	}
-
 	master = spi_alloc_master(dev, sizeof(struct xilinx_spi));
 	if (!master)
 		return NULL;
@@ -389,21 +393,21 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
 	}
 
 	master->bus_num = bus_num;
-	master->num_chipselect = pdata->num_chipselect;
+	master->num_chipselect = num_cs;
 #ifdef CONFIG_OF
 	master->dev.of_node = dev->of_node;
 #endif
 
 	xspi->mem = *mem;
 	xspi->irq = irq;
-	if (pdata->little_endian) {
+	if (little_endian) {
 		xspi->read_fn = xspi_read32;
 		xspi->write_fn = xspi_write32;
 	} else {
 		xspi->read_fn = xspi_read32_be;
 		xspi->write_fn = xspi_write32_be;
 	}
-	xspi->bits_per_word = pdata->bits_per_word;
+	xspi->bits_per_word = bits_per_word;
 	if (xspi->bits_per_word == 8) {
 		xspi->tx_fn = xspi_tx8;
 		xspi->rx_fn = xspi_rx8;
@@ -462,6 +466,97 @@ void xilinx_spi_deinit(struct spi_master *master)
 }
 EXPORT_SYMBOL(xilinx_spi_deinit);
 
+static int __devinit xilinx_spi_probe(struct platform_device *dev)
+{
+	struct xspi_platform_data *pdata;
+	struct resource *r;
+	int irq, num_cs = 0, little_endian = 0, bits_per_word = 8;
+	struct spi_master *master;
+	u8 i;
+
+	pdata = dev->dev.platform_data;
+	if (pdata) {
+		num_cs = pdata->num_chipselect;
+		little_endian = pdata->little_endian;
+		bits_per_word = pdata->bits_per_word;
+	}
+
+#ifdef CONFIG_OF
+	if (dev->dev.of_node) {
+		const __be32 *prop;
+		int len;
+
+		/* number of slave select bits is required */
+		prop = of_get_property(dev->dev.of_node, "xlnx,num-ss-bits",
+				       &len);
+		if (prop && len >= sizeof(*prop))
+			num_cs = __be32_to_cpup(prop);
+	}
+#endif
+
+	if (!num_cs) {
+		dev_err(&dev->dev, "Missing slave select configuration data\n");
+		return -EINVAL;
+	}
+
+
+	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!r)
+		return -ENODEV;
+
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	master = xilinx_spi_init(&dev->dev, r, irq, dev->id, num_cs,
+				 little_endian, bits_per_word);
+	if (!master)
+		return -ENODEV;
+
+	if (pdata) {
+		for (i = 0; i < pdata->num_devices; i++)
+			spi_new_device(master, pdata->devices + i);
+	}
+
+	platform_set_drvdata(dev, master);
+	return 0;
+}
+
+static int __devexit xilinx_spi_remove(struct platform_device *dev)
+{
+	xilinx_spi_deinit(platform_get_drvdata(dev));
+	platform_set_drvdata(dev, 0);
+
+	return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:" XILINX_SPI_NAME);
+
+static struct platform_driver xilinx_spi_driver = {
+	.probe = xilinx_spi_probe,
+	.remove = __devexit_p(xilinx_spi_remove),
+	.driver = {
+		.name = XILINX_SPI_NAME,
+		.owner = THIS_MODULE,
+#ifdef CONFIG_OF
+		.of_match_table = xilinx_spi_of_match,
+#endif
+	},
+};
+
+static int __init xilinx_spi_pltfm_init(void)
+{
+	return platform_driver_register(&xilinx_spi_driver);
+}
+module_init(xilinx_spi_pltfm_init);
+
+static void __exit xilinx_spi_pltfm_exit(void)
+{
+	platform_driver_unregister(&xilinx_spi_driver);
+}
+module_exit(xilinx_spi_pltfm_exit);
+
 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
 MODULE_DESCRIPTION("Xilinx SPI driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/spi/xilinx_spi_of.c b/drivers/spi/xilinx_spi_of.c
deleted file mode 100644
index b66c2dbf20a..00000000000
--- a/drivers/spi/xilinx_spi_of.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Xilinx SPI OF device driver
- *
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Xilinx SPI devices as OF devices
- *
- * Inspired by xilinx_spi.c, 2002-2007 (c) MontaVista Software, Inc.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-#include <linux/of_device.h>
-#include <linux/of_spi.h>
-
-#include <linux/spi/xilinx_spi.h>
-#include "xilinx_spi.h"
-
-
-static int __devinit xilinx_spi_of_probe(struct platform_device *ofdev,
-	const struct of_device_id *match)
-{
-	struct spi_master *master;
-	struct xspi_platform_data *pdata;
-	struct resource r_mem;
-	struct resource r_irq;
-	int rc = 0;
-	const u32 *prop;
-	int len;
-
-	rc = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem);
-	if (rc) {
-		dev_warn(&ofdev->dev, "invalid address\n");
-		return rc;
-	}
-
-	rc = of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq);
-	if (rc == NO_IRQ) {
-		dev_warn(&ofdev->dev, "no IRQ found\n");
-		return -ENODEV;
-	}
-
-	ofdev->dev.platform_data =
-		kzalloc(sizeof(struct xspi_platform_data), GFP_KERNEL);
-	pdata = ofdev->dev.platform_data;
-	if (!pdata)
-		return -ENOMEM;
-
-	/* number of slave select bits is required */
-	prop = of_get_property(ofdev->dev.of_node, "xlnx,num-ss-bits", &len);
-	if (!prop || len < sizeof(*prop)) {
-		dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
-		return -EINVAL;
-	}
-	pdata->num_chipselect = *prop;
-	pdata->bits_per_word = 8;
-	master = xilinx_spi_init(&ofdev->dev, &r_mem, r_irq.start, -1);
-	if (!master)
-		return -ENODEV;
-
-	dev_set_drvdata(&ofdev->dev, master);
-
-	return 0;
-}
-
-static int __devexit xilinx_spi_remove(struct platform_device *ofdev)
-{
-	xilinx_spi_deinit(dev_get_drvdata(&ofdev->dev));
-	dev_set_drvdata(&ofdev->dev, 0);
-	kfree(ofdev->dev.platform_data);
-	ofdev->dev.platform_data = NULL;
-	return 0;
-}
-
-static int __exit xilinx_spi_of_remove(struct platform_device *op)
-{
-	return xilinx_spi_remove(op);
-}
-
-static const struct of_device_id xilinx_spi_of_match[] = {
-	{ .compatible = "xlnx,xps-spi-2.00.a", },
-	{ .compatible = "xlnx,xps-spi-2.00.b", },
-	{}
-};
-
-MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
-
-static struct of_platform_driver xilinx_spi_of_driver = {
-	.probe = xilinx_spi_of_probe,
-	.remove = __exit_p(xilinx_spi_of_remove),
-	.driver = {
-		.name = "xilinx-xps-spi",
-		.owner = THIS_MODULE,
-		.of_match_table = xilinx_spi_of_match,
-	},
-};
-
-static int __init xilinx_spi_of_init(void)
-{
-	return of_register_platform_driver(&xilinx_spi_of_driver);
-}
-module_init(xilinx_spi_of_init);
-
-static void __exit xilinx_spi_of_exit(void)
-{
-	of_unregister_platform_driver(&xilinx_spi_of_driver);
-}
-module_exit(xilinx_spi_of_exit);
-
-MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
-MODULE_DESCRIPTION("Xilinx SPI platform driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/spi/xilinx_spi_pltfm.c b/drivers/spi/xilinx_spi_pltfm.c
deleted file mode 100644
index 24debac646a..00000000000
--- a/drivers/spi/xilinx_spi_pltfm.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Support for Xilinx SPI platform devices
- * Copyright (c) 2009 Intel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Xilinx SPI devices as platform devices
- *
- * Inspired by xilinx_spi.c, 2002-2007 (c) MontaVista Software, Inc.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <linux/spi/xilinx_spi.h>
-
-#include "xilinx_spi.h"
-
-static int __devinit xilinx_spi_probe(struct platform_device *dev)
-{
-	struct xspi_platform_data *pdata;
-	struct resource *r;
-	int irq;
-	struct spi_master *master;
-	u8 i;
-
-	pdata = dev->dev.platform_data;
-	if (!pdata)
-		return -ENODEV;
-
-	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (!r)
-		return -ENODEV;
-
-	irq = platform_get_irq(dev, 0);
-	if (irq < 0)
-		return -ENXIO;
-
-	master = xilinx_spi_init(&dev->dev, r, irq, dev->id);
-	if (!master)
-		return -ENODEV;
-
-	for (i = 0; i < pdata->num_devices; i++)
-		spi_new_device(master, pdata->devices + i);
-
-	platform_set_drvdata(dev, master);
-	return 0;
-}
-
-static int __devexit xilinx_spi_remove(struct platform_device *dev)
-{
-	xilinx_spi_deinit(platform_get_drvdata(dev));
-	platform_set_drvdata(dev, 0);
-
-	return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:" XILINX_SPI_NAME);
-
-static struct platform_driver xilinx_spi_driver = {
-	.probe	= xilinx_spi_probe,
-	.remove	= __devexit_p(xilinx_spi_remove),
-	.driver = {
-		.name = XILINX_SPI_NAME,
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init xilinx_spi_pltfm_init(void)
-{
-	return platform_driver_register(&xilinx_spi_driver);
-}
-module_init(xilinx_spi_pltfm_init);
-
-static void __exit xilinx_spi_pltfm_exit(void)
-{
-	platform_driver_unregister(&xilinx_spi_driver);
-}
-module_exit(xilinx_spi_pltfm_exit);
-
-MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
-MODULE_DESCRIPTION("Xilinx SPI platform driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/ssb/b43_pci_bridge.c b/drivers/ssb/b43_pci_bridge.c
index ef9c6a04ad8..744d3f6e470 100644
--- a/drivers/ssb/b43_pci_bridge.c
+++ b/drivers/ssb/b43_pci_bridge.c
@@ -24,6 +24,7 @@ static const struct pci_device_id b43_pci_bridge_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC,  0x4318) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index c68b3dc19e1..3918d2cc585 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -383,6 +383,35 @@ static int ssb_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 			     ssb_dev->id.revision);
 }
 
+#define ssb_config_attr(attrib, field, format_string) \
+static ssize_t \
+attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \
+}
+
+ssb_config_attr(core_num, core_index, "%u\n")
+ssb_config_attr(coreid, id.coreid, "0x%04x\n")
+ssb_config_attr(vendor, id.vendor, "0x%04x\n")
+ssb_config_attr(revision, id.revision, "%u\n")
+ssb_config_attr(irq, irq, "%u\n")
+static ssize_t
+name_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%s\n",
+		       ssb_core_name(dev_to_ssb_dev(dev)->id.coreid));
+}
+
+static struct device_attribute ssb_device_attrs[] = {
+	__ATTR_RO(name),
+	__ATTR_RO(core_num),
+	__ATTR_RO(coreid),
+	__ATTR_RO(vendor),
+	__ATTR_RO(revision),
+	__ATTR_RO(irq),
+	__ATTR_NULL,
+};
+
 static struct bus_type ssb_bustype = {
 	.name		= "ssb",
 	.match		= ssb_bus_match,
@@ -392,6 +421,7 @@ static struct bus_type ssb_bustype = {
 	.suspend	= ssb_device_suspend,
 	.resume		= ssb_device_resume,
 	.uevent		= ssb_device_uevent,
+	.dev_attrs	= ssb_device_attrs,
 };
 
 static void ssb_buses_lock(void)
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index 6e88d2b603b..158449e5504 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -406,6 +406,46 @@ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
 	out->antenna_gain.ghz5.a3 = gain;
 }
 
+/* Revs 4 5 and 8 have partially shared layout */
+static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in)
+{
+	SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01,
+	     SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT);
+	SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01,
+	     SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT);
+	SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23,
+	     SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT);
+	SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23,
+	     SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT);
+
+	SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01,
+	     SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT);
+	SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01,
+	     SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT);
+	SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23,
+	     SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT);
+	SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23,
+	     SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT);
+
+	SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01,
+	     SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT);
+	SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01,
+	     SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT);
+	SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23,
+	     SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT);
+	SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23,
+	     SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT);
+
+	SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01,
+	     SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT);
+	SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01,
+	     SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT);
+	SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23,
+	     SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT);
+	SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23,
+	     SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT);
+}
+
 static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
 {
 	int i;
@@ -471,6 +511,8 @@ static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
 	       sizeof(out->antenna_gain.ghz5));
 
+	sprom_extract_r458(out, in);
+
 	/* TODO - get remaining rev 4 stuff needed */
 }
 
@@ -561,6 +603,8 @@ static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
 	memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
 	       sizeof(out->antenna_gain.ghz5));
 
+	sprom_extract_r458(out, in);
+
 	/* TODO - get remaining rev 8 stuff needed */
 }
 
@@ -573,37 +617,34 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
 	ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
 	memset(out->et0mac, 0xFF, 6);		/* preset et0 and et1 mac */
 	memset(out->et1mac, 0xFF, 6);
+
 	if ((bus->chip_id & 0xFF00) == 0x4400) {
 		/* Workaround: The BCM44XX chip has a stupid revision
 		 * number stored in the SPROM.
 		 * Always extract r1. */
 		out->revision = 1;
+		ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision);
+	}
+
+	switch (out->revision) {
+	case 1:
+	case 2:
+	case 3:
 		sprom_extract_r123(out, in);
-	} else if (bus->chip_id == 0x4321) {
-		/* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
-		out->revision = 4;
+		break;
+	case 4:
+	case 5:
 		sprom_extract_r45(out, in);
-	} else {
-		switch (out->revision) {
-		case 1:
-		case 2:
-		case 3:
-			sprom_extract_r123(out, in);
-			break;
-		case 4:
-		case 5:
-			sprom_extract_r45(out, in);
-			break;
-		case 8:
-			sprom_extract_r8(out, in);
-			break;
-		default:
-			ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
-				   "  revision %d detected. Will extract"
-				   " v1\n", out->revision);
-			out->revision = 1;
-			sprom_extract_r123(out, in);
-		}
+		break;
+	case 8:
+		sprom_extract_r8(out, in);
+		break;
+	default:
+		ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
+			   "  revision %d detected. Will extract"
+			   " v1\n", out->revision);
+		out->revision = 1;
+		sprom_extract_r123(out, in);
 	}
 
 	if (out->boardflags_lo == 0xFFFF)
@@ -618,7 +659,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 			     struct ssb_sprom *sprom)
 {
 	const struct ssb_sprom *fallback;
-	int err = -ENOMEM;
+	int err;
 	u16 *buf;
 
 	if (!ssb_is_sprom_available(bus)) {
@@ -645,7 +686,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 
 	buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL);
 	if (!buf)
-		goto out;
+		return -ENOMEM;
 	bus->sprom_size = SSB_SPROMSIZE_WORDS_R123;
 	sprom_do_read(bus, buf);
 	err = sprom_check_crc(buf, bus->sprom_size);
@@ -655,7 +696,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 		buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
 			      GFP_KERNEL);
 		if (!buf)
-			goto out;
+			return -ENOMEM;
 		bus->sprom_size = SSB_SPROMSIZE_WORDS_R4;
 		sprom_do_read(bus, buf);
 		err = sprom_check_crc(buf, bus->sprom_size);
@@ -677,7 +718,6 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
 
 out_free:
 	kfree(buf);
-out:
 	return err;
 }
 
diff --git a/drivers/ssb/pcihost_wrapper.c b/drivers/ssb/pcihost_wrapper.c
index 6536a041d90..f6c8c81a002 100644
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
@@ -59,6 +59,7 @@ static int ssb_pcihost_probe(struct pci_dev *dev,
 	struct ssb_bus *ssb;
 	int err = -ENOMEM;
 	const char *name;
+	u32 val;
 
 	ssb = kzalloc(sizeof(*ssb), GFP_KERNEL);
 	if (!ssb)
@@ -74,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_dev *dev,
 		goto err_pci_disable;
 	pci_set_master(dev);
 
+	/* Disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state */
+	pci_read_config_dword(dev, 0x40, &val);
+	if ((val & 0x0000ff00) != 0)
+		pci_write_config_dword(dev, 0x40, val & 0xffff00ff);
+
 	err = ssb_bus_pcibus_register(ssb, dev);
 	if (err)
 		goto err_pci_release_regions;
diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c
index ee079ab9fb2..5a0985d4ce1 100644
--- a/drivers/ssb/scan.c
+++ b/drivers/ssb/scan.c
@@ -405,10 +405,10 @@ int ssb_bus_scan(struct ssb_bus *bus,
 				/* Ignore PCI cores on PCI-E cards.
 				 * Ignore PCI-E cores on PCI cards. */
 				if (dev->id.coreid == SSB_DEV_PCI) {
-					if (bus->host_pci->is_pcie)
+					if (pci_is_pcie(bus->host_pci))
 						continue;
 				} else {
-					if (!bus->host_pci->is_pcie)
+					if (!pci_is_pcie(bus->host_pci))
 						continue;
 				}
 			}
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 5eafdf43555..bdc632b6b58 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -51,9 +51,11 @@ source "drivers/staging/cx25821/Kconfig"
 
 source "drivers/staging/tm6000/Kconfig"
 
-source "drivers/staging/cpia/Kconfig"
+source "drivers/staging/dabusb/Kconfig"
 
-source "drivers/staging/stradis/Kconfig"
+source "drivers/staging/se401/Kconfig"
+
+source "drivers/staging/usbvideo/Kconfig"
 
 source "drivers/staging/usbip/Kconfig"
 
@@ -111,8 +113,6 @@ source "drivers/staging/vt6655/Kconfig"
 
 source "drivers/staging/vt6656/Kconfig"
 
-source "drivers/staging/udlfb/Kconfig"
-
 source "drivers/staging/hv/Kconfig"
 
 source "drivers/staging/vme/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index a97a955c094..3eda5c73a50 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -8,8 +8,9 @@ obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_VIDEO_GO7007)	+= go7007/
 obj-$(CONFIG_VIDEO_CX25821)	+= cx25821/
 obj-$(CONFIG_VIDEO_TM6000)	+= tm6000/
-obj-$(CONFIG_VIDEO_CPIA)	+= cpia/
-obj-$(CONFIG_VIDEO_STRADIS)	+= stradis/
+obj-$(CONFIG_USB_DABUSB)        += dabusb/
+obj-$(CONFIG_USB_VICAM)         += usbvideo/
+obj-$(CONFIG_USB_SE401)         += se401/
 obj-$(CONFIG_LIRC_STAGING)	+= lirc/
 obj-$(CONFIG_USB_IP_COMMON)	+= usbip/
 obj-$(CONFIG_W35UND)		+= winbond/
@@ -38,7 +39,6 @@ obj-$(CONFIG_USB_SERIAL_QUATECH_USB2)	+= quatech_usb2/
 obj-$(CONFIG_OCTEON_ETHERNET)	+= octeon/
 obj-$(CONFIG_VT6655)		+= vt6655/
 obj-$(CONFIG_VT6656)		+= vt6656/
-obj-$(CONFIG_FB_UDL)		+= udlfb/
 obj-$(CONFIG_HYPERV)		+= hv/
 obj-$(CONFIG_VME_BUS)		+= vme/
 obj-$(CONFIG_MRST_RAR_HANDLER)	+= memrar/
diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c
index 8c95d8c2a4f..016c6f7f863 100644
--- a/drivers/staging/asus_oled/asus_oled.c
+++ b/drivers/staging/asus_oled/asus_oled.c
@@ -620,13 +620,13 @@ static ssize_t class_set_picture(struct device *device,
 
 #define ASUS_OLED_DEVICE_ATTR(_file)		dev_attr_asus_oled_##_file
 
-static DEVICE_ATTR(asus_oled_enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(asus_oled_enabled, S_IWUSR | S_IRUGO,
 		   get_enabled, set_enabled);
-static DEVICE_ATTR(asus_oled_picture, S_IWUGO , NULL, set_picture);
+static DEVICE_ATTR(asus_oled_picture, S_IWUSR , NULL, set_picture);
 
-static DEVICE_ATTR(enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO,
 		   class_get_enabled, class_set_enabled);
-static DEVICE_ATTR(picture, S_IWUGO, NULL, class_set_picture);
+static DEVICE_ATTR(picture, S_IWUSR, NULL, class_set_picture);
 
 static int asus_oled_probe(struct usb_interface *interface,
 			   const struct usb_device_id *id)
diff --git a/drivers/staging/ath6kl/Kconfig b/drivers/staging/ath6kl/Kconfig
index ae2cdf48b74..8a5caa30b85 100644
--- a/drivers/staging/ath6kl/Kconfig
+++ b/drivers/staging/ath6kl/Kconfig
@@ -102,7 +102,7 @@ config AR600x_BT_RESET_PIN
 
 config ATH6KL_CFG80211
 	bool "CFG80211 support"
-	depends on ATH6K_LEGACY
+	depends on ATH6K_LEGACY && CFG80211
 	help
 	Enables support for CFG80211 APIs. The default option is to use WEXT. Even with this option enabled, WEXT is not explicitly disabled and the onus of not exercising WEXT lies on the application(s) running in the user space.
 
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
index c5a6d6c1673..a659f704737 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
@@ -1126,7 +1126,7 @@ ar6000_transfer_bin_file(AR_SOFTC_T *ar, AR6K_BIN_FILE file, A_UINT32 address, A
         if ((board_ext_address) && (fw_entry->size == (board_data_size + board_ext_data_size))) {
             A_UINT32 param;
 
-            status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(((A_UINT32)fw_entry->data) + board_data_size), board_ext_data_size);
+            status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(fw_entry->data + board_data_size), board_ext_data_size);
 
             if (status != A_OK) {
                 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
@@ -3030,7 +3030,8 @@ ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
         A_UINT8 csumDest=0;
         A_UINT8 csum=skb->ip_summed;
         if(csumOffload && (csum==CHECKSUM_PARTIAL)){
-            csumStart=skb->csum_start-(skb->network_header-skb->head)+sizeof(ATH_LLC_SNAP_HDR);
+            csumStart = (skb->head + skb->csum_start - skb_network_header(skb) +
+			 sizeof(ATH_LLC_SNAP_HDR));
             csumDest=skb->csum_offset+csumStart;
         }
 #endif
diff --git a/drivers/staging/ath6kl/os/linux/cfg80211.c b/drivers/staging/ath6kl/os/linux/cfg80211.c
index c94ad29eeb4..7269d0a1d61 100644
--- a/drivers/staging/ath6kl/os/linux/cfg80211.c
+++ b/drivers/staging/ath6kl/os/linux/cfg80211.c
@@ -808,7 +808,7 @@ ar6k_cfg80211_scanComplete_event(AR_SOFTC_T *ar, A_STATUS status)
 
 static int
 ar6k_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
-                      A_UINT8 key_index, const A_UINT8 *mac_addr,
+                      A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr,
                       struct key_params *params)
 {
     AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev);
@@ -901,7 +901,7 @@ ar6k_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
 
 static int
 ar6k_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
-                      A_UINT8 key_index, const A_UINT8 *mac_addr)
+                      A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr)
 {
     AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev);
 
@@ -936,7 +936,8 @@ ar6k_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
 
 static int
 ar6k_cfg80211_get_key(struct wiphy *wiphy, struct net_device *ndev,
-                      A_UINT8 key_index, const A_UINT8 *mac_addr, void *cookie,
+                      A_UINT8 key_index, bool pairwise, const A_UINT8 *mac_addr,
+                      void *cookie,
                       void (*callback)(void *cookie, struct key_params*))
 {
     AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(ndev);
diff --git a/drivers/staging/autofs/root.c b/drivers/staging/autofs/root.c
index 0fdec4befd8..bf0e9755da6 100644
--- a/drivers/staging/autofs/root.c
+++ b/drivers/staging/autofs/root.c
@@ -154,13 +154,16 @@ static int try_to_fill_dentry(struct dentry *dentry, struct super_block *sb, str
  * yet completely filled in, and revalidate has to delay such
  * lookups..
  */
-static int autofs_revalidate(struct dentry * dentry, struct nameidata *nd)
+static int autofs_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
 	struct inode * dir;
 	struct autofs_sb_info *sbi;
 	struct autofs_dir_ent *ent;
 	int res;
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
 	lock_kernel();
 	dir = dentry->d_parent->d_inode;
 	sbi = autofs_sbi(dir->i_sb);
@@ -237,7 +240,7 @@ static struct dentry *autofs_root_lookup(struct inode *dir, struct dentry *dentr
 	 *
 	 * We need to do this before we release the directory semaphore.
 	 */
-	dentry->d_op = &autofs_dentry_operations;
+	d_set_d_op(dentry, &autofs_dentry_operations);
 	dentry->d_flags |= DCACHE_AUTOFS_PENDING;
 	d_add(dentry, NULL);
 
diff --git a/drivers/staging/batman-adv/hard-interface.c b/drivers/staging/batman-adv/hard-interface.c
index 80cfa866958..d85de82f941 100644
--- a/drivers/staging/batman-adv/hard-interface.c
+++ b/drivers/staging/batman-adv/hard-interface.c
@@ -165,7 +165,7 @@ static void update_mac_addresses(struct batman_if *batman_if)
 	       batman_if->net_dev->dev_addr, ETH_ALEN);
 }
 
-static void check_known_mac_addr(uint8_t *addr)
+static void check_known_mac_addr(struct net_device *net_dev)
 {
 	struct batman_if *batman_if;
 
@@ -175,11 +175,16 @@ static void check_known_mac_addr(uint8_t *addr)
 		    (batman_if->if_status != IF_TO_BE_ACTIVATED))
 			continue;
 
-		if (!compare_orig(batman_if->net_dev->dev_addr, addr))
+		if (batman_if->net_dev == net_dev)
+			continue;
+
+		if (!compare_orig(batman_if->net_dev->dev_addr,
+				  net_dev->dev_addr))
 			continue;
 
 		pr_warning("The newly added mac address (%pM) already exists "
-			   "on: %s\n", addr, batman_if->net_dev->name);
+			   "on: %s\n", net_dev->dev_addr,
+			   batman_if->net_dev->name);
 		pr_warning("It is strongly recommended to keep mac addresses "
 			   "unique to avoid problems!\n");
 	}
@@ -430,7 +435,7 @@ static struct batman_if *hardif_add_interface(struct net_device *net_dev)
 	atomic_set(&batman_if->refcnt, 0);
 	hardif_hold(batman_if);
 
-	check_known_mac_addr(batman_if->net_dev->dev_addr);
+	check_known_mac_addr(batman_if->net_dev);
 
 	spin_lock(&if_list_lock);
 	list_add_tail_rcu(&batman_if->list, &if_list);
@@ -458,9 +463,6 @@ static void hardif_remove_interface(struct batman_if *batman_if)
 		return;
 
 	batman_if->if_status = IF_TO_BE_REMOVED;
-
-	/* caller must take if_list_lock */
-	list_del_rcu(&batman_if->list);
 	synchronize_rcu();
 	sysfs_del_hardif(&batman_if->hardif_obj);
 	hardif_put(batman_if);
@@ -469,13 +471,21 @@ static void hardif_remove_interface(struct batman_if *batman_if)
 void hardif_remove_interfaces(void)
 {
 	struct batman_if *batman_if, *batman_if_tmp;
+	struct list_head if_queue;
+
+	INIT_LIST_HEAD(&if_queue);
 
-	rtnl_lock();
 	spin_lock(&if_list_lock);
 	list_for_each_entry_safe(batman_if, batman_if_tmp, &if_list, list) {
-		hardif_remove_interface(batman_if);
+		list_del_rcu(&batman_if->list);
+		list_add_tail(&batman_if->list, &if_queue);
 	}
 	spin_unlock(&if_list_lock);
+
+	rtnl_lock();
+	list_for_each_entry_safe(batman_if, batman_if_tmp, &if_queue, list) {
+		hardif_remove_interface(batman_if);
+	}
 	rtnl_unlock();
 }
 
@@ -502,8 +512,10 @@ static int hard_if_event(struct notifier_block *this,
 		break;
 	case NETDEV_UNREGISTER:
 		spin_lock(&if_list_lock);
-		hardif_remove_interface(batman_if);
+		list_del_rcu(&batman_if->list);
 		spin_unlock(&if_list_lock);
+
+		hardif_remove_interface(batman_if);
 		break;
 	case NETDEV_CHANGEMTU:
 		if (batman_if->soft_iface)
@@ -515,7 +527,7 @@ static int hard_if_event(struct notifier_block *this,
 			goto out;
 		}
 
-		check_known_mac_addr(batman_if->net_dev->dev_addr);
+		check_known_mac_addr(batman_if->net_dev);
 		update_mac_addresses(batman_if);
 
 		bat_priv = netdev_priv(batman_if->soft_iface);
diff --git a/drivers/staging/batman-adv/routing.c b/drivers/staging/batman-adv/routing.c
index 90102631330..657b69e6b95 100644
--- a/drivers/staging/batman-adv/routing.c
+++ b/drivers/staging/batman-adv/routing.c
@@ -1000,10 +1000,10 @@ int recv_icmp_packet(struct sk_buff *skb, struct batman_if *recv_if)
 
 /* find a suitable router for this originator, and use
  * bonding if possible. */
-struct neigh_node *find_router(struct orig_node *orig_node,
+struct neigh_node *find_router(struct bat_priv *bat_priv,
+			       struct orig_node *orig_node,
 			       struct batman_if *recv_if)
 {
-	struct bat_priv *bat_priv;
 	struct orig_node *primary_orig_node;
 	struct orig_node *router_orig;
 	struct neigh_node *router, *first_candidate, *best_router;
@@ -1019,13 +1019,9 @@ struct neigh_node *find_router(struct orig_node *orig_node,
 	/* without bonding, the first node should
 	 * always choose the default router. */
 
-	if (!recv_if)
-		return orig_node->router;
-
-	bat_priv = netdev_priv(recv_if->soft_iface);
 	bonding_enabled = atomic_read(&bat_priv->bonding_enabled);
 
-	if (!bonding_enabled)
+	if ((!recv_if) && (!bonding_enabled))
 		return orig_node->router;
 
 	router_orig = orig_node->router->orig_node;
@@ -1154,7 +1150,7 @@ static int route_unicast_packet(struct sk_buff *skb,
 	orig_node = ((struct orig_node *)
 		     hash_find(bat_priv->orig_hash, unicast_packet->dest));
 
-	router = find_router(orig_node, recv_if);
+	router = find_router(bat_priv, orig_node, recv_if);
 
 	if (!router) {
 		spin_unlock_irqrestore(&bat_priv->orig_hash_lock, flags);
diff --git a/drivers/staging/batman-adv/routing.h b/drivers/staging/batman-adv/routing.h
index 06ea99df370..92674c8d9c0 100644
--- a/drivers/staging/batman-adv/routing.h
+++ b/drivers/staging/batman-adv/routing.h
@@ -38,8 +38,8 @@ int recv_ucast_frag_packet(struct sk_buff *skb, struct batman_if *recv_if);
 int recv_bcast_packet(struct sk_buff *skb, struct batman_if *recv_if);
 int recv_vis_packet(struct sk_buff *skb, struct batman_if *recv_if);
 int recv_bat_packet(struct sk_buff *skb, struct batman_if *recv_if);
-struct neigh_node *find_router(struct orig_node *orig_node,
-		struct batman_if *recv_if);
+struct neigh_node *find_router(struct bat_priv *bat_priv,
+		struct orig_node *orig_node, struct batman_if *recv_if);
 void update_bonding_candidates(struct bat_priv *bat_priv,
 			       struct orig_node *orig_node);
 
diff --git a/drivers/staging/batman-adv/soft-interface.c b/drivers/staging/batman-adv/soft-interface.c
index 3904db9ce7b..0e996181daf 100644
--- a/drivers/staging/batman-adv/soft-interface.c
+++ b/drivers/staging/batman-adv/soft-interface.c
@@ -194,14 +194,15 @@ void interface_rx(struct net_device *soft_iface,
 	struct bat_priv *priv = netdev_priv(soft_iface);
 
 	/* check if enough space is available for pulling, and pull */
-	if (!pskb_may_pull(skb, hdr_size)) {
-		kfree_skb(skb);
-		return;
-	}
+	if (!pskb_may_pull(skb, hdr_size))
+		goto dropped;
+
 	skb_pull_rcsum(skb, hdr_size);
 /*	skb_set_mac_header(skb, -sizeof(struct ethhdr));*/
 
 	/* skb->dev & skb->pkt_type are set here */
+	if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
+		goto dropped;
 	skb->protocol = eth_type_trans(skb, soft_iface);
 
 	/* should not be neccesary anymore as we use skb_pull_rcsum()
@@ -216,6 +217,11 @@ void interface_rx(struct net_device *soft_iface,
 	soft_iface->last_rx = jiffies;
 
 	netif_rx(skb);
+	return;
+
+dropped:
+	kfree_skb(skb);
+	return;
 }
 
 #ifdef HAVE_NET_DEVICE_OPS
diff --git a/drivers/staging/batman-adv/unicast.c b/drivers/staging/batman-adv/unicast.c
index 0dac50d69c0..0459413ff67 100644
--- a/drivers/staging/batman-adv/unicast.c
+++ b/drivers/staging/batman-adv/unicast.c
@@ -224,7 +224,7 @@ int unicast_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv)
 	if (!orig_node)
 		orig_node = transtable_search(bat_priv, ethhdr->h_dest);
 
-	router = find_router(orig_node, NULL);
+	router = find_router(bat_priv, orig_node, NULL);
 
 	if (!router)
 		goto unlock;
diff --git a/drivers/staging/bcm/Bcmchar.c b/drivers/staging/bcm/Bcmchar.c
index 77fdfe24d99..fead9c56162 100644
--- a/drivers/staging/bcm/Bcmchar.c
+++ b/drivers/staging/bcm/Bcmchar.c
@@ -1001,13 +1001,15 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		}
 #endif
 		case IOCTL_BE_BUCKET_SIZE:
-			Adapter->BEBucketSize = *(PULONG)arg;
-			Status = STATUS_SUCCESS;
+			Status = 0;
+			if (get_user(Adapter->BEBucketSize, (unsigned long __user *)arg))
+				Status = -EFAULT;
 			break;
 
 		case IOCTL_RTPS_BUCKET_SIZE:
-			Adapter->rtPSBucketSize = *(PULONG)arg;
-			Status = STATUS_SUCCESS;
+			Status = 0;
+			if (get_user(Adapter->rtPSBucketSize, (unsigned long __user *)arg))
+				Status = -EFAULT;
 			break;
 		case IOCTL_CHIP_RESET:
 	    {
@@ -1028,11 +1030,15 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		case IOCTL_QOS_THRESHOLD:
 		{
 			USHORT uiLoopIndex;
-			for(uiLoopIndex = 0 ; uiLoopIndex < NO_OF_QUEUES ; uiLoopIndex++)
-			{
-				Adapter->PackInfo[uiLoopIndex].uiThreshold = *(PULONG)arg;
+
+			Status = 0;
+			for (uiLoopIndex = 0; uiLoopIndex < NO_OF_QUEUES; uiLoopIndex++) {
+				if (get_user(Adapter->PackInfo[uiLoopIndex].uiThreshold,
+						(unsigned long __user *)arg)) {
+					Status = -EFAULT;
+					break;
+				}
 			}
-			Status = STATUS_SUCCESS;
 			break;
 		}
 
@@ -1093,7 +1099,8 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 		}
 		case IOCTL_BCM_GET_CURRENT_STATUS:
 		{
-			LINK_STATE *plink_state = NULL;
+			LINK_STATE plink_state;
+
 			/* Copy Ioctl Buffer structure */
 			if(copy_from_user(&IoBuffer, argp, sizeof(IOCTL_BUFFER)))
 			{
@@ -1101,13 +1108,19 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 				Status = -EFAULT;
 				break;
 			}
-			plink_state = (LINK_STATE*)arg;
-			plink_state->bIdleMode = (UCHAR)Adapter->IdleMode;
-			plink_state->bShutdownMode = Adapter->bShutStatus;
-			plink_state->ucLinkStatus = (UCHAR)Adapter->LinkStatus;
-			if(copy_to_user(IoBuffer.OutputBuffer,
-				(PUCHAR)plink_state, (UINT)IoBuffer.OutputLength))
-			{
+			if (IoBuffer.OutputLength != sizeof(plink_state)) {
+				Status = -EINVAL;
+				break;
+			}
+
+			if (copy_from_user(&plink_state, (void __user *)arg, sizeof(plink_state))) {
+				Status = -EFAULT;
+				break;
+			}
+			plink_state.bIdleMode = (UCHAR)Adapter->IdleMode;
+			plink_state.bShutdownMode = Adapter->bShutStatus;
+			plink_state.ucLinkStatus = (UCHAR)Adapter->LinkStatus;
+			if (copy_to_user(IoBuffer.OutputBuffer, &plink_state, IoBuffer.OutputLength)) {
 				BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "Copy_to_user Failed..\n");
 				Status = -EFAULT;
 				break;
@@ -1331,7 +1344,9 @@ static long bcm_char_ioctl(struct file *filp, UINT cmd, ULONG arg)
 						BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Copy From User space failed. status :%d", Status);
 						return -EFAULT;
 					}
-					uiSectorSize = *((PUINT)(IoBuffer.InputBuffer)); /* FIXME: unchecked __user access */
+					if (get_user(uiSectorSize, (unsigned int __user *)IoBuffer.InputBuffer))
+						return -EFAULT;
+
 					if((uiSectorSize < MIN_SECTOR_SIZE) || (uiSectorSize > MAX_SECTOR_SIZE))
 					{
 
diff --git a/drivers/staging/bcm/InterfaceInit.c b/drivers/staging/bcm/InterfaceInit.c
index 824f9a45007..e97ad99b1bb 100644
--- a/drivers/staging/bcm/InterfaceInit.c
+++ b/drivers/staging/bcm/InterfaceInit.c
@@ -277,7 +277,7 @@ usbbcm_device_probe(struct usb_interface *intf, const struct usb_device_id *id)
 		if(psAdapter->bDoSuspend)
 		{
 #ifdef CONFIG_PM
-			udev->autosuspend_delay = 0;
+			pm_runtime_set_autosuspend_delay(&udev->dev, 0);
 			intf->needs_remote_wakeup = 1;
 #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 35)
  			udev->autosuspend_disabled = 0;
diff --git a/drivers/staging/brcm80211/README b/drivers/staging/brcm80211/README
index c3ba9bb9b11..a27bb0b4f58 100644
--- a/drivers/staging/brcm80211/README
+++ b/drivers/staging/brcm80211/README
@@ -88,7 +88,9 @@ with the driver.
 
 Contact Info:
 =============
-Brett Rudley	brudley@broadcom.com
-Henry Ptasinski henryp@broadcom.com
-Nohee Ko	noheek@broadcom.com
+Brett Rudley		brudley@broadcom.com
+Henry Ptasinski		henryp@broadcom.com
+Dowan Kim			dowan@broadcom.com
+Roland Vossen		rvossen@broadcom.com
+Arend van Spriel	arend@broadcom.com
 
diff --git a/drivers/staging/brcm80211/TODO b/drivers/staging/brcm80211/TODO
index 8803d300b53..24ebadbe424 100644
--- a/drivers/staging/brcm80211/TODO
+++ b/drivers/staging/brcm80211/TODO
@@ -45,5 +45,7 @@ Contact
 =====
 Brett Rudley <brudley@broadcom.com>
 Henry Ptasinski <henryp@broadcom.com>
-Nohee Ko <noheek@broadcom.com>
+Dowan Kim <dowan@broadcom.com>
+Roland Vossen <rvossen@broadcom.com>
+Arend van Spriel <arend@broadcom.com>
 
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
index bbbe7c5f749..9335f02029a 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
@@ -2222,8 +2222,6 @@ int dhd_net_attach(dhd_pub_t *dhdp, int ifidx)
 	ASSERT(net);
 
 	ASSERT(!net->netdev_ops);
-	net->netdev_ops = &dhd_ops_virt;
-
 	net->netdev_ops = &dhd_ops_pri;
 
 	/*
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
index 3f29488d9c7..ea0825238d5 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
@@ -95,12 +95,12 @@ static s32 wl_cfg80211_config_default_key(struct wiphy *wiphy,
 					    struct net_device *dev,
 					    u8 key_idx);
 static s32 wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev,
-				 u8 key_idx, const u8 *mac_addr,
+				 u8 key_idx, bool pairwise, const u8 *mac_addr,
 				 struct key_params *params);
 static s32 wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev,
-				 u8 key_idx, const u8 *mac_addr);
+				 u8 key_idx, bool pairwise, const u8 *mac_addr);
 static s32 wl_cfg80211_get_key(struct wiphy *wiphy, struct net_device *dev,
-				 u8 key_idx, const u8 *mac_addr,
+				 u8 key_idx, bool pairwise, const u8 *mac_addr,
 				 void *cookie, void (*callback) (void *cookie,
 								 struct
 								 key_params *
@@ -1615,7 +1615,7 @@ wl_add_keyext(struct wiphy *wiphy, struct net_device *dev,
 
 static s32
 wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev,
-		    u8 key_idx, const u8 *mac_addr,
+		    u8 key_idx, bool pairwise, const u8 *mac_addr,
 		    struct key_params *params)
 {
 	struct wl_wsec_key key;
@@ -1700,7 +1700,7 @@ wl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *dev,
 
 static s32
 wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev,
-		    u8 key_idx, const u8 *mac_addr)
+		    u8 key_idx, bool pairwise, const u8 *mac_addr)
 {
 	struct wl_wsec_key key;
 	s32 err = 0;
@@ -1756,7 +1756,7 @@ wl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *dev,
 
 static s32
 wl_cfg80211_get_key(struct wiphy *wiphy, struct net_device *dev,
-		    u8 key_idx, const u8 *mac_addr, void *cookie,
+		    u8 key_idx, bool pairwise, const u8 *mac_addr, void *cookie,
 		    void (*callback) (void *cookie, struct key_params * params))
 {
 	struct key_params params;
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 1f177a67ff1..de784ff08ca 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -2295,8 +2295,8 @@ static void tidy_up(struct usbduxsub *usbduxsub_tmp)
 	usbduxsub_tmp->inBuffer = NULL;
 	kfree(usbduxsub_tmp->insnBuffer);
 	usbduxsub_tmp->insnBuffer = NULL;
-	kfree(usbduxsub_tmp->inBuffer);
-	usbduxsub_tmp->inBuffer = NULL;
+	kfree(usbduxsub_tmp->outBuffer);
+	usbduxsub_tmp->outBuffer = NULL;
 	kfree(usbduxsub_tmp->dac_commands);
 	usbduxsub_tmp->dac_commands = NULL;
 	kfree(usbduxsub_tmp->dux_commands);
diff --git a/drivers/staging/cpia/Kconfig b/drivers/staging/cpia/Kconfig
deleted file mode 100644
index 205d247ad37..00000000000
--- a/drivers/staging/cpia/Kconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-config VIDEO_CPIA
-	tristate "CPiA Video For Linux (DEPRECATED)"
-	depends on VIDEO_V4L1
-	default n
-	---help---
-	  This driver is DEPRECATED please use the gspca cpia1 module
-	  instead. Note that you need atleast version 0.6.4 of libv4l for
-	  the cpia1 gspca module.
-
-	  This is the video4linux driver for cameras based on Vision's CPiA
-	  (Colour Processor Interface ASIC), such as the Creative Labs Video
-	  Blaster Webcam II. If you have one of these cameras, say Y here
-	  and select parallel port and/or USB lowlevel support below,
-	  otherwise say N. This will not work with the Creative Webcam III.
-
-	  Please read <file:Documentation/video4linux/README.cpia> for more
-	  information.
-
-	  This driver is also available as a module (cpia).
-
-config VIDEO_CPIA_PP
-	tristate "CPiA Parallel Port Lowlevel Support"
-	depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
-	help
-	  This is the lowlevel parallel port support for cameras based on
-	  Vision's CPiA (Colour Processor Interface ASIC), such as the
-	  Creative Webcam II. If you have the parallel port version of one
-	  of these cameras, say Y here, otherwise say N. It is also available
-	  as a module (cpia_pp).
-
-config VIDEO_CPIA_USB
-	tristate "CPiA USB Lowlevel Support"
-	depends on VIDEO_CPIA && USB
-	help
-	  This is the lowlevel USB support for cameras based on Vision's CPiA
-	  (Colour Processor Interface ASIC), such as the Creative Webcam II.
-	  If you have the USB version of one of these cameras, say Y here,
-	  otherwise say N. This will not work with the Creative Webcam III.
-	  It is also available as a module (cpia_usb).
diff --git a/drivers/staging/cpia/Makefile b/drivers/staging/cpia/Makefile
deleted file mode 100644
index 89e52f10d73..00000000000
--- a/drivers/staging/cpia/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-$(CONFIG_VIDEO_CPIA) += cpia.o
-obj-$(CONFIG_VIDEO_CPIA_PP) += cpia_pp.o
-obj-$(CONFIG_VIDEO_CPIA_USB) += cpia_usb.o
-
-EXTRA_CFLAGS += -Idrivers/media/video
diff --git a/drivers/staging/cpia/TODO b/drivers/staging/cpia/TODO
deleted file mode 100644
index ccb1c0775ee..00000000000
--- a/drivers/staging/cpia/TODO
+++ /dev/null
@@ -1,8 +0,0 @@
-This is an obsolete driver for some cpia-based webcams that use the parallel port.
-We couldn't find anyone with this hardware in order to port it to use V4L2.
-
-Also, parallel-port webcams are obsolete nowadays.
-
-If nobody take care on it, the driver will be removed for 2.6.38.
-
-Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/staging/cpia/cpia.c b/drivers/staging/cpia/cpia.c
deleted file mode 100644
index 933ae4c8cb9..00000000000
--- a/drivers/staging/cpia/cpia.c
+++ /dev/null
@@ -1,4032 +0,0 @@
-/*
- * cpia CPiA driver
- *
- * Supports CPiA based Video Camera's.
- *
- * (C) Copyright 1999-2000 Peter Pregler
- * (C) Copyright 1999-2000 Scott J. Bertin
- * (C) Copyright 1999-2000 Johannes Erdfelt <johannes@erdfelt.com>
- * (C) Copyright 2000 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_  1 */
-
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/vmalloc.h>
-#include <linux/sched.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/ctype.h>
-#include <linux/pagemap.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <linux/mutex.h>
-
-#include "cpia.h"
-
-static int video_nr = -1;
-
-#ifdef MODULE
-module_param(video_nr, int, 0);
-MODULE_AUTHOR("Scott J. Bertin <sbertin@securenym.net> & Peter Pregler <Peter_Pregler@email.com> & Johannes Erdfelt <johannes@erdfelt.com>");
-MODULE_DESCRIPTION("V4L-driver for Vision CPiA based cameras");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("video");
-#endif
-
-static unsigned short colorspace_conv;
-module_param(colorspace_conv, ushort, 0444);
-MODULE_PARM_DESC(colorspace_conv,
-		 " Colorspace conversion:"
-		 "\n  0 = disable, 1 = enable"
-		 "\n  Default value is 0"
-		 );
-
-#define ABOUT "V4L-Driver for Vision CPiA based cameras"
-
-#define CPIA_MODULE_CPIA			(0<<5)
-#define CPIA_MODULE_SYSTEM			(1<<5)
-#define CPIA_MODULE_VP_CTRL			(5<<5)
-#define CPIA_MODULE_CAPTURE			(6<<5)
-#define CPIA_MODULE_DEBUG			(7<<5)
-
-#define INPUT (DATA_IN << 8)
-#define OUTPUT (DATA_OUT << 8)
-
-#define CPIA_COMMAND_GetCPIAVersion	(INPUT | CPIA_MODULE_CPIA | 1)
-#define CPIA_COMMAND_GetPnPID		(INPUT | CPIA_MODULE_CPIA | 2)
-#define CPIA_COMMAND_GetCameraStatus	(INPUT | CPIA_MODULE_CPIA | 3)
-#define CPIA_COMMAND_GotoHiPower	(OUTPUT | CPIA_MODULE_CPIA | 4)
-#define CPIA_COMMAND_GotoLoPower	(OUTPUT | CPIA_MODULE_CPIA | 5)
-#define CPIA_COMMAND_GotoSuspend	(OUTPUT | CPIA_MODULE_CPIA | 7)
-#define CPIA_COMMAND_GotoPassThrough	(OUTPUT | CPIA_MODULE_CPIA | 8)
-#define CPIA_COMMAND_ModifyCameraStatus	(OUTPUT | CPIA_MODULE_CPIA | 10)
-
-#define CPIA_COMMAND_ReadVCRegs		(INPUT | CPIA_MODULE_SYSTEM | 1)
-#define CPIA_COMMAND_WriteVCReg		(OUTPUT | CPIA_MODULE_SYSTEM | 2)
-#define CPIA_COMMAND_ReadMCPorts	(INPUT | CPIA_MODULE_SYSTEM | 3)
-#define CPIA_COMMAND_WriteMCPort	(OUTPUT | CPIA_MODULE_SYSTEM | 4)
-#define CPIA_COMMAND_SetBaudRate	(OUTPUT | CPIA_MODULE_SYSTEM | 5)
-#define CPIA_COMMAND_SetECPTiming	(OUTPUT | CPIA_MODULE_SYSTEM | 6)
-#define CPIA_COMMAND_ReadIDATA		(INPUT | CPIA_MODULE_SYSTEM | 7)
-#define CPIA_COMMAND_WriteIDATA		(OUTPUT | CPIA_MODULE_SYSTEM | 8)
-#define CPIA_COMMAND_GenericCall	(OUTPUT | CPIA_MODULE_SYSTEM | 9)
-#define CPIA_COMMAND_I2CStart		(OUTPUT | CPIA_MODULE_SYSTEM | 10)
-#define CPIA_COMMAND_I2CStop		(OUTPUT | CPIA_MODULE_SYSTEM | 11)
-#define CPIA_COMMAND_I2CWrite		(OUTPUT | CPIA_MODULE_SYSTEM | 12)
-#define CPIA_COMMAND_I2CRead		(INPUT | CPIA_MODULE_SYSTEM | 13)
-
-#define CPIA_COMMAND_GetVPVersion	(INPUT | CPIA_MODULE_VP_CTRL | 1)
-#define CPIA_COMMAND_ResetFrameCounter	(INPUT | CPIA_MODULE_VP_CTRL | 2)
-#define CPIA_COMMAND_SetColourParams	(OUTPUT | CPIA_MODULE_VP_CTRL | 3)
-#define CPIA_COMMAND_SetExposure	(OUTPUT | CPIA_MODULE_VP_CTRL | 4)
-#define CPIA_COMMAND_SetColourBalance	(OUTPUT | CPIA_MODULE_VP_CTRL | 6)
-#define CPIA_COMMAND_SetSensorFPS	(OUTPUT | CPIA_MODULE_VP_CTRL | 7)
-#define CPIA_COMMAND_SetVPDefaults	(OUTPUT | CPIA_MODULE_VP_CTRL | 8)
-#define CPIA_COMMAND_SetApcor		(OUTPUT | CPIA_MODULE_VP_CTRL | 9)
-#define CPIA_COMMAND_SetFlickerCtrl	(OUTPUT | CPIA_MODULE_VP_CTRL | 10)
-#define CPIA_COMMAND_SetVLOffset	(OUTPUT | CPIA_MODULE_VP_CTRL | 11)
-#define CPIA_COMMAND_GetColourParams	(INPUT | CPIA_MODULE_VP_CTRL | 16)
-#define CPIA_COMMAND_GetColourBalance	(INPUT | CPIA_MODULE_VP_CTRL | 17)
-#define CPIA_COMMAND_GetExposure	(INPUT | CPIA_MODULE_VP_CTRL | 18)
-#define CPIA_COMMAND_SetSensorMatrix	(OUTPUT | CPIA_MODULE_VP_CTRL | 19)
-#define CPIA_COMMAND_ColourBars		(OUTPUT | CPIA_MODULE_VP_CTRL | 25)
-#define CPIA_COMMAND_ReadVPRegs		(INPUT | CPIA_MODULE_VP_CTRL | 30)
-#define CPIA_COMMAND_WriteVPReg		(OUTPUT | CPIA_MODULE_VP_CTRL | 31)
-
-#define CPIA_COMMAND_GrabFrame		(OUTPUT | CPIA_MODULE_CAPTURE | 1)
-#define CPIA_COMMAND_UploadFrame	(OUTPUT | CPIA_MODULE_CAPTURE | 2)
-#define CPIA_COMMAND_SetGrabMode	(OUTPUT | CPIA_MODULE_CAPTURE | 3)
-#define CPIA_COMMAND_InitStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 4)
-#define CPIA_COMMAND_FiniStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 5)
-#define CPIA_COMMAND_StartStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 6)
-#define CPIA_COMMAND_EndStreamCap	(OUTPUT | CPIA_MODULE_CAPTURE | 7)
-#define CPIA_COMMAND_SetFormat		(OUTPUT | CPIA_MODULE_CAPTURE | 8)
-#define CPIA_COMMAND_SetROI		(OUTPUT | CPIA_MODULE_CAPTURE | 9)
-#define CPIA_COMMAND_SetCompression	(OUTPUT | CPIA_MODULE_CAPTURE | 10)
-#define CPIA_COMMAND_SetCompressionTarget (OUTPUT | CPIA_MODULE_CAPTURE | 11)
-#define CPIA_COMMAND_SetYUVThresh	(OUTPUT | CPIA_MODULE_CAPTURE | 12)
-#define CPIA_COMMAND_SetCompressionParams (OUTPUT | CPIA_MODULE_CAPTURE | 13)
-#define CPIA_COMMAND_DiscardFrame	(OUTPUT | CPIA_MODULE_CAPTURE | 14)
-#define CPIA_COMMAND_GrabReset		(OUTPUT | CPIA_MODULE_CAPTURE | 15)
-
-#define CPIA_COMMAND_OutputRS232	(OUTPUT | CPIA_MODULE_DEBUG | 1)
-#define CPIA_COMMAND_AbortProcess	(OUTPUT | CPIA_MODULE_DEBUG | 4)
-#define CPIA_COMMAND_SetDramPage	(OUTPUT | CPIA_MODULE_DEBUG | 5)
-#define CPIA_COMMAND_StartDramUpload	(OUTPUT | CPIA_MODULE_DEBUG | 6)
-#define CPIA_COMMAND_StartDummyDtream	(OUTPUT | CPIA_MODULE_DEBUG | 8)
-#define CPIA_COMMAND_AbortStream	(OUTPUT | CPIA_MODULE_DEBUG | 9)
-#define CPIA_COMMAND_DownloadDRAM	(OUTPUT | CPIA_MODULE_DEBUG | 10)
-#define CPIA_COMMAND_Null		(OUTPUT | CPIA_MODULE_DEBUG | 11)
-
-enum {
-	FRAME_READY,		/* Ready to grab into */
-	FRAME_GRABBING,		/* In the process of being grabbed into */
-	FRAME_DONE,		/* Finished grabbing, but not been synced yet */
-	FRAME_UNUSED,		/* Unused (no MCAPTURE) */
-};
-
-#define COMMAND_NONE			0x0000
-#define COMMAND_SETCOMPRESSION		0x0001
-#define COMMAND_SETCOMPRESSIONTARGET	0x0002
-#define COMMAND_SETCOLOURPARAMS		0x0004
-#define COMMAND_SETFORMAT		0x0008
-#define COMMAND_PAUSE			0x0010
-#define COMMAND_RESUME			0x0020
-#define COMMAND_SETYUVTHRESH		0x0040
-#define COMMAND_SETECPTIMING		0x0080
-#define COMMAND_SETCOMPRESSIONPARAMS	0x0100
-#define COMMAND_SETEXPOSURE		0x0200
-#define COMMAND_SETCOLOURBALANCE	0x0400
-#define COMMAND_SETSENSORFPS		0x0800
-#define COMMAND_SETAPCOR		0x1000
-#define COMMAND_SETFLICKERCTRL		0x2000
-#define COMMAND_SETVLOFFSET		0x4000
-#define COMMAND_SETLIGHTS		0x8000
-
-#define ROUND_UP_EXP_FOR_FLICKER 15
-
-/* Constants for automatic frame rate adjustment */
-#define MAX_EXP       302
-#define MAX_EXP_102   255
-#define LOW_EXP       140
-#define VERY_LOW_EXP   70
-#define TC             94
-#define	EXP_ACC_DARK   50
-#define	EXP_ACC_LIGHT  90
-#define HIGH_COMP_102 160
-#define MAX_COMP      239
-#define DARK_TIME       3
-#define LIGHT_TIME      3
-
-/* Maximum number of 10ms loops to wait for the stream to become ready */
-#define READY_TIMEOUT 100
-
-/* Developer's Guide Table 5 p 3-34
- * indexed by [mains][sensorFps.baserate][sensorFps.divisor]*/
-static u8 flicker_jumps[2][2][4] =
-{ { { 76, 38, 19, 9 }, { 92, 46, 23, 11 } },
-  { { 64, 32, 16, 8 }, { 76, 38, 19, 9} }
-};
-
-/* forward declaration of local function */
-static void reset_camera_struct(struct cam_data *cam);
-static int find_over_exposure(int brightness);
-static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
-			int on);
-
-
-/**********************************************************************
- *
- * Memory management
- *
- **********************************************************************/
-static void *rvmalloc(unsigned long size)
-{
-	void *mem;
-	unsigned long adr;
-
-	size = PAGE_ALIGN(size);
-	mem = vmalloc_32(size);
-	if (!mem)
-		return NULL;
-
-	memset(mem, 0, size); /* Clear the ram out, no junk to the user */
-	adr = (unsigned long) mem;
-	while (size > 0) {
-		SetPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-
-	return mem;
-}
-
-static void rvfree(void *mem, unsigned long size)
-{
-	unsigned long adr;
-
-	if (!mem)
-		return;
-
-	adr = (unsigned long) mem;
-	while ((long) size > 0) {
-		ClearPageReserved(vmalloc_to_page((void *)adr));
-		adr += PAGE_SIZE;
-		size -= PAGE_SIZE;
-	}
-	vfree(mem);
-}
-
-/**********************************************************************
- *
- * /proc interface
- *
- **********************************************************************/
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *cpia_proc_root=NULL;
-
-static int cpia_proc_show(struct seq_file *m, void *v)
-{
-	struct cam_data *cam = m->private;
-	int tmp;
-	char tmpstr[29];
-
-	seq_printf(m, "read-only\n-----------------------\n");
-	seq_printf(m, "V4L Driver version:       %d.%d.%d\n",
-		       CPIA_MAJ_VER, CPIA_MIN_VER, CPIA_PATCH_VER);
-	seq_printf(m, "CPIA Version:             %d.%02d (%d.%d)\n",
-		       cam->params.version.firmwareVersion,
-		       cam->params.version.firmwareRevision,
-		       cam->params.version.vcVersion,
-		       cam->params.version.vcRevision);
-	seq_printf(m, "CPIA PnP-ID:              %04x:%04x:%04x\n",
-		       cam->params.pnpID.vendor, cam->params.pnpID.product,
-		       cam->params.pnpID.deviceRevision);
-	seq_printf(m, "VP-Version:               %d.%d %04x\n",
-		       cam->params.vpVersion.vpVersion,
-		       cam->params.vpVersion.vpRevision,
-		       cam->params.vpVersion.cameraHeadID);
-
-	seq_printf(m, "system_state:             %#04x\n",
-		       cam->params.status.systemState);
-	seq_printf(m, "grab_state:               %#04x\n",
-		       cam->params.status.grabState);
-	seq_printf(m, "stream_state:             %#04x\n",
-		       cam->params.status.streamState);
-	seq_printf(m, "fatal_error:              %#04x\n",
-		       cam->params.status.fatalError);
-	seq_printf(m, "cmd_error:                %#04x\n",
-		       cam->params.status.cmdError);
-	seq_printf(m, "debug_flags:              %#04x\n",
-		       cam->params.status.debugFlags);
-	seq_printf(m, "vp_status:                %#04x\n",
-		       cam->params.status.vpStatus);
-	seq_printf(m, "error_code:               %#04x\n",
-		       cam->params.status.errorCode);
-	/* QX3 specific entries */
-	if (cam->params.qx3.qx3_detected) {
-		seq_printf(m, "button:                   %4d\n",
-			       cam->params.qx3.button);
-		seq_printf(m, "cradled:                  %4d\n",
-			       cam->params.qx3.cradled);
-	}
-	seq_printf(m, "video_size:               %s\n",
-		       cam->params.format.videoSize == VIDEOSIZE_CIF ?
-		       "CIF " : "QCIF");
-	seq_printf(m, "roi:                      (%3d, %3d) to (%3d, %3d)\n",
-		       cam->params.roi.colStart*8,
-		       cam->params.roi.rowStart*4,
-		       cam->params.roi.colEnd*8,
-		       cam->params.roi.rowEnd*4);
-	seq_printf(m, "actual_fps:               %3d\n", cam->fps);
-	seq_printf(m, "transfer_rate:            %4dkB/s\n",
-		       cam->transfer_rate);
-
-	seq_printf(m, "\nread-write\n");
-	seq_printf(m, "-----------------------  current       min"
-		       "       max   default  comment\n");
-	seq_printf(m, "brightness:             %8d  %8d  %8d  %8d\n",
-		       cam->params.colourParams.brightness, 0, 100, 50);
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits contrast to 80 */
-		tmp = 80;
-	else
-		tmp = 96;
-
-	seq_printf(m, "contrast:               %8d  %8d  %8d  %8d"
-		       "  steps of 8\n",
-		       cam->params.colourParams.contrast, 0, tmp, 48);
-	seq_printf(m, "saturation:             %8d  %8d  %8d  %8d\n",
-		       cam->params.colourParams.saturation, 0, 100, 50);
-	tmp = (25000+5000*cam->params.sensorFps.baserate)/
-	      (1<<cam->params.sensorFps.divisor);
-	seq_printf(m, "sensor_fps:             %4d.%03d  %8d  %8d  %8d\n",
-		       tmp/1000, tmp%1000, 3, 30, 15);
-	seq_printf(m, "stream_start_line:      %8d  %8d  %8d  %8d\n",
-		       2*cam->params.streamStartLine, 0,
-		       cam->params.format.videoSize == VIDEOSIZE_CIF ? 288:144,
-		       cam->params.format.videoSize == VIDEOSIZE_CIF ? 240:120);
-	seq_printf(m, "sub_sample:             %8s  %8s  %8s  %8s\n",
-		       cam->params.format.subSample == SUBSAMPLE_420 ?
-		       "420" : "422", "420", "422", "422");
-	seq_printf(m, "yuv_order:              %8s  %8s  %8s  %8s\n",
-		       cam->params.format.yuvOrder == YUVORDER_YUYV ?
-		       "YUYV" : "UYVY", "YUYV" , "UYVY", "YUYV");
-	seq_printf(m, "ecp_timing:             %8s  %8s  %8s  %8s\n",
-		       cam->params.ecpTiming ? "slow" : "normal", "slow",
-		       "normal", "normal");
-
-	if (cam->params.colourBalance.balanceMode == 2) {
-		sprintf(tmpstr, "auto");
-	} else {
-		sprintf(tmpstr, "manual");
-	}
-	seq_printf(m, "color_balance_mode:     %8s  %8s  %8s"
-		       "  %8s\n",  tmpstr, "manual", "auto", "auto");
-	seq_printf(m, "red_gain:               %8d  %8d  %8d  %8d\n",
-		       cam->params.colourBalance.redGain, 0, 212, 32);
-	seq_printf(m, "green_gain:             %8d  %8d  %8d  %8d\n",
-		       cam->params.colourBalance.greenGain, 0, 212, 6);
-	seq_printf(m, "blue_gain:              %8d  %8d  %8d  %8d\n",
-		       cam->params.colourBalance.blueGain, 0, 212, 92);
-
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits gain to 2 */
-		sprintf(tmpstr, "%8d  %8d  %8d", 1, 2, 2);
-	else
-		sprintf(tmpstr, "%8d  %8d  %8d", 1, 8, 2);
-
-	if (cam->params.exposure.gainMode == 0)
-		seq_printf(m, "max_gain:                unknown  %28s"
-			       "  powers of 2\n", tmpstr);
-	else
-		seq_printf(m, "max_gain:               %8d  %28s"
-			       "  1,2,4 or 8 \n",
-			       1<<(cam->params.exposure.gainMode-1), tmpstr);
-
-	switch(cam->params.exposure.expMode) {
-	case 1:
-	case 3:
-		sprintf(tmpstr, "manual");
-		break;
-	case 2:
-		sprintf(tmpstr, "auto");
-		break;
-	default:
-		sprintf(tmpstr, "unknown");
-		break;
-	}
-	seq_printf(m, "exposure_mode:          %8s  %8s  %8s"
-		       "  %8s\n",  tmpstr, "manual", "auto", "auto");
-	seq_printf(m, "centre_weight:          %8s  %8s  %8s  %8s\n",
-		       (2-cam->params.exposure.centreWeight) ? "on" : "off",
-		       "off", "on", "on");
-	seq_printf(m, "gain:                   %8d  %8d  max_gain  %8d  1,2,4,8 possible\n",
-		       1<<cam->params.exposure.gain, 1, 1);
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits fineExp/2 to 127 */
-		tmp = 254;
-	else
-		tmp = 510;
-
-	seq_printf(m, "fine_exp:               %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.fineExp*2, 0, tmp, 0);
-	if (cam->params.version.firmwareVersion == 1 &&
-	   cam->params.version.firmwareRevision == 2)
-		/* 1-02 firmware limits coarseExpHi to 0 */
-		tmp = MAX_EXP_102;
-	else
-		tmp = MAX_EXP;
-
-	seq_printf(m, "coarse_exp:             %8d  %8d  %8d"
-		       "  %8d\n", cam->params.exposure.coarseExpLo+
-		       256*cam->params.exposure.coarseExpHi, 0, tmp, 185);
-	seq_printf(m, "red_comp:               %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.redComp, COMP_RED, 255, COMP_RED);
-	seq_printf(m, "green1_comp:            %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.green1Comp, COMP_GREEN1, 255,
-		       COMP_GREEN1);
-	seq_printf(m, "green2_comp:            %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.green2Comp, COMP_GREEN2, 255,
-		       COMP_GREEN2);
-	seq_printf(m, "blue_comp:              %8d  %8d  %8d  %8d\n",
-		       cam->params.exposure.blueComp, COMP_BLUE, 255, COMP_BLUE);
-
-	seq_printf(m, "apcor_gain1:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain1, 0, 0xff, 0x1c);
-	seq_printf(m, "apcor_gain2:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain2, 0, 0xff, 0x1a);
-	seq_printf(m, "apcor_gain4:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain4, 0, 0xff, 0x2d);
-	seq_printf(m, "apcor_gain8:            %#8x  %#8x  %#8x  %#8x\n",
-		       cam->params.apcor.gain8, 0, 0xff, 0x2a);
-	seq_printf(m, "vl_offset_gain1:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain1, 0, 255, 24);
-	seq_printf(m, "vl_offset_gain2:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain2, 0, 255, 28);
-	seq_printf(m, "vl_offset_gain4:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain4, 0, 255, 30);
-	seq_printf(m, "vl_offset_gain8:        %8d  %8d  %8d  %8d\n",
-		       cam->params.vlOffset.gain8, 0, 255, 30);
-	seq_printf(m, "flicker_control:        %8s  %8s  %8s  %8s\n",
-		       cam->params.flickerControl.flickerMode ? "on" : "off",
-		       "off", "on", "off");
-	seq_printf(m, "mains_frequency:        %8d  %8d  %8d  %8d"
-		       " only 50/60\n",
-		       cam->mainsFreq ? 60 : 50, 50, 60, 50);
-	if(cam->params.flickerControl.allowableOverExposure < 0)
-		seq_printf(m, "allowable_overexposure: %4dauto      auto  %8d      auto\n",
-			       -cam->params.flickerControl.allowableOverExposure,
-			       255);
-	else
-		seq_printf(m, "allowable_overexposure: %8d      auto  %8d      auto\n",
-			       cam->params.flickerControl.allowableOverExposure,
-			       255);
-	seq_printf(m, "compression_mode:       ");
-	switch(cam->params.compression.mode) {
-	case CPIA_COMPRESSION_NONE:
-		seq_printf(m, "%8s", "none");
-		break;
-	case CPIA_COMPRESSION_AUTO:
-		seq_printf(m, "%8s", "auto");
-		break;
-	case CPIA_COMPRESSION_MANUAL:
-		seq_printf(m, "%8s", "manual");
-		break;
-	default:
-		seq_printf(m, "%8s", "unknown");
-		break;
-	}
-	seq_printf(m, "    none,auto,manual      auto\n");
-	seq_printf(m, "decimation_enable:      %8s  %8s  %8s  %8s\n",
-		       cam->params.compression.decimation ==
-		       DECIMATION_ENAB ? "on":"off", "off", "on",
-		       "off");
-	seq_printf(m, "compression_target:    %9s %9s %9s %9s\n",
-		       cam->params.compressionTarget.frTargeting  ==
-		       CPIA_COMPRESSION_TARGET_FRAMERATE ?
-		       "framerate":"quality",
-		       "framerate", "quality", "quality");
-	seq_printf(m, "target_framerate:       %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionTarget.targetFR, 1, 30, 15);
-	seq_printf(m, "target_quality:         %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionTarget.targetQ, 1, 64, 5);
-	seq_printf(m, "y_threshold:            %8d  %8d  %8d  %8d\n",
-		       cam->params.yuvThreshold.yThreshold, 0, 31, 6);
-	seq_printf(m, "uv_threshold:           %8d  %8d  %8d  %8d\n",
-		       cam->params.yuvThreshold.uvThreshold, 0, 31, 6);
-	seq_printf(m, "hysteresis:             %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.hysteresis, 0, 255, 3);
-	seq_printf(m, "threshold_max:          %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.threshMax, 0, 255, 11);
-	seq_printf(m, "small_step:             %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.smallStep, 0, 255, 1);
-	seq_printf(m, "large_step:             %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.largeStep, 0, 255, 3);
-	seq_printf(m, "decimation_hysteresis:  %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.decimationHysteresis,
-		       0, 255, 2);
-	seq_printf(m, "fr_diff_step_thresh:    %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.frDiffStepThresh,
-		       0, 255, 5);
-	seq_printf(m, "q_diff_step_thresh:     %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.qDiffStepThresh,
-		       0, 255, 3);
-	seq_printf(m, "decimation_thresh_mod:  %8d  %8d  %8d  %8d\n",
-		       cam->params.compressionParams.decimationThreshMod,
-		       0, 255, 2);
-	/* QX3 specific entries */
-	if (cam->params.qx3.qx3_detected) {
-		seq_printf(m, "toplight:               %8s  %8s  %8s  %8s\n",
-			       cam->params.qx3.toplight ? "on" : "off",
-			       "off", "on", "off");
-		seq_printf(m, "bottomlight:            %8s  %8s  %8s  %8s\n",
-			       cam->params.qx3.bottomlight ? "on" : "off",
-			       "off", "on", "off");
-	}
-
-	return 0;
-}
-
-static int cpia_proc_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, cpia_proc_show, PDE(inode)->data);
-}
-
-static int match(char *checkstr, char **buffer, size_t *count,
-		 int *find_colon, int *err)
-{
-	int ret, colon_found = 1;
-	int len = strlen(checkstr);
-	ret = (len <= *count && strncmp(*buffer, checkstr, len) == 0);
-	if (ret) {
-		*buffer += len;
-		*count -= len;
-		if (*find_colon) {
-			colon_found = 0;
-			while (*count && (**buffer == ' ' || **buffer == '\t' ||
-					  (!colon_found && **buffer == ':'))) {
-				if (**buffer == ':')
-					colon_found = 1;
-				--*count;
-				++*buffer;
-			}
-			if (!*count || !colon_found)
-				*err = -EINVAL;
-			*find_colon = 0;
-		}
-	}
-	return ret;
-}
-
-static unsigned long int value(char **buffer, size_t *count, int *err)
-{
-	char *p;
-	unsigned long int ret;
-	ret = simple_strtoul(*buffer, &p, 0);
-	if (p == *buffer)
-		*err = -EINVAL;
-	else {
-		*count -= p - *buffer;
-		*buffer = p;
-	}
-	return ret;
-}
-
-static ssize_t cpia_proc_write(struct file *file, const char __user *buf,
-			       size_t count, loff_t *pos)
-{
-	struct cam_data *cam = PDE(file->f_path.dentry->d_inode)->data;
-	struct cam_params new_params;
-	char *page, *buffer;
-	int retval, find_colon;
-	int size = count;
-	unsigned long val = 0;
-	u32 command_flags = 0;
-	u8 new_mains;
-
-	/*
-	 * This code to copy from buf to page is shamelessly copied
-	 * from the comx driver
-	 */
-	if (count > PAGE_SIZE) {
-		printk(KERN_ERR "count is %zu > %d!!!\n", count, (int)PAGE_SIZE);
-		return -ENOSPC;
-	}
-
-	if (!(page = (char *)__get_free_page(GFP_KERNEL))) return -ENOMEM;
-
-	if(copy_from_user(page, buf, count))
-	{
-		retval = -EFAULT;
-		goto out;
-	}
-
-	if (page[count-1] == '\n')
-		page[count-1] = '\0';
-	else if (count < PAGE_SIZE)
-		page[count] = '\0';
-	else if (page[count]) {
-		retval = -EINVAL;
-		goto out;
-	}
-
-	buffer = page;
-
-	if (mutex_lock_interruptible(&cam->param_lock))
-		return -ERESTARTSYS;
-
-	/*
-	 * Skip over leading whitespace
-	 */
-	while (count && isspace(*buffer)) {
-		--count;
-		++buffer;
-	}
-
-	memcpy(&new_params, &cam->params, sizeof(struct cam_params));
-	new_mains = cam->mainsFreq;
-
-#define MATCH(x) (match(x, &buffer, &count, &find_colon, &retval))
-#define VALUE (value(&buffer,&count, &retval))
-#define FIRMWARE_VERSION(x,y) (new_params.version.firmwareVersion == (x) && \
-			       new_params.version.firmwareRevision == (y))
-
-	retval = 0;
-	while (count && !retval) {
-		find_colon = 1;
-		if (MATCH("brightness")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 100)
-					new_params.colourParams.brightness = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURPARAMS;
-			if(new_params.flickerControl.allowableOverExposure < 0)
-				new_params.flickerControl.allowableOverExposure =
-					-find_over_exposure(new_params.colourParams.brightness);
-			if(new_params.flickerControl.flickerMode != 0)
-				command_flags |= COMMAND_SETFLICKERCTRL;
-
-		} else if (MATCH("contrast")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 100) {
-					/* contrast is in steps of 8, so round*/
-					val = ((val + 3) / 8) * 8;
-					/* 1-02 firmware limits contrast to 80*/
-					if (FIRMWARE_VERSION(1,2) && val > 80)
-						val = 80;
-
-					new_params.colourParams.contrast = val;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURPARAMS;
-		} else if (MATCH("saturation")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 100)
-					new_params.colourParams.saturation = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURPARAMS;
-		} else if (MATCH("sensor_fps")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				/* find values so that sensorFPS is minimized,
-				 * but >= val */
-				if (val > 30)
-					retval = -EINVAL;
-				else if (val > 25) {
-					new_params.sensorFps.divisor = 0;
-					new_params.sensorFps.baserate = 1;
-				} else if (val > 15) {
-					new_params.sensorFps.divisor = 0;
-					new_params.sensorFps.baserate = 0;
-				} else if (val > 12) {
-					new_params.sensorFps.divisor = 1;
-					new_params.sensorFps.baserate = 1;
-				} else if (val > 7) {
-					new_params.sensorFps.divisor = 1;
-					new_params.sensorFps.baserate = 0;
-				} else if (val > 6) {
-					new_params.sensorFps.divisor = 2;
-					new_params.sensorFps.baserate = 1;
-				} else if (val > 3) {
-					new_params.sensorFps.divisor = 2;
-					new_params.sensorFps.baserate = 0;
-				} else {
-					new_params.sensorFps.divisor = 3;
-					/* Either base rate would work here */
-					new_params.sensorFps.baserate = 1;
-				}
-				new_params.flickerControl.coarseJump =
-					flicker_jumps[new_mains]
-					[new_params.sensorFps.baserate]
-					[new_params.sensorFps.divisor];
-				if (new_params.flickerControl.flickerMode)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-			}
-			command_flags |= COMMAND_SETSENSORFPS;
-			cam->exposure_status = EXPOSURE_NORMAL;
-		} else if (MATCH("stream_start_line")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				int max_line = 288;
-
-				if (new_params.format.videoSize == VIDEOSIZE_QCIF)
-					max_line = 144;
-				if (val <= max_line)
-					new_params.streamStartLine = val/2;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("sub_sample")) {
-			if (!retval && MATCH("420"))
-				new_params.format.subSample = SUBSAMPLE_420;
-			else if (!retval && MATCH("422"))
-				new_params.format.subSample = SUBSAMPLE_422;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETFORMAT;
-		} else if (MATCH("yuv_order")) {
-			if (!retval && MATCH("YUYV"))
-				new_params.format.yuvOrder = YUVORDER_YUYV;
-			else if (!retval && MATCH("UYVY"))
-				new_params.format.yuvOrder = YUVORDER_UYVY;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETFORMAT;
-		} else if (MATCH("ecp_timing")) {
-			if (!retval && MATCH("normal"))
-				new_params.ecpTiming = 0;
-			else if (!retval && MATCH("slow"))
-				new_params.ecpTiming = 1;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETECPTIMING;
-		} else if (MATCH("color_balance_mode")) {
-			if (!retval && MATCH("manual"))
-				new_params.colourBalance.balanceMode = 3;
-			else if (!retval && MATCH("auto"))
-				new_params.colourBalance.balanceMode = 2;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("red_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 212) {
-					new_params.colourBalance.redGain = val;
-					new_params.colourBalance.balanceMode = 1;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("green_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 212) {
-					new_params.colourBalance.greenGain = val;
-					new_params.colourBalance.balanceMode = 1;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("blue_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 212) {
-					new_params.colourBalance.blueGain = val;
-					new_params.colourBalance.balanceMode = 1;
-				} else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOLOURBALANCE;
-		} else if (MATCH("max_gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				/* 1-02 firmware limits gain to 2 */
-				if (FIRMWARE_VERSION(1,2) && val > 2)
-					val = 2;
-				switch(val) {
-				case 1:
-					new_params.exposure.gainMode = 1;
-					break;
-				case 2:
-					new_params.exposure.gainMode = 2;
-					break;
-				case 4:
-					new_params.exposure.gainMode = 3;
-					break;
-				case 8:
-					new_params.exposure.gainMode = 4;
-					break;
-				default:
-					retval = -EINVAL;
-					break;
-				}
-			}
-			command_flags |= COMMAND_SETEXPOSURE;
-		} else if (MATCH("exposure_mode")) {
-			if (!retval && MATCH("auto"))
-				new_params.exposure.expMode = 2;
-			else if (!retval && MATCH("manual")) {
-				if (new_params.exposure.expMode == 2)
-					new_params.exposure.expMode = 3;
-				if(new_params.flickerControl.flickerMode != 0)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-				new_params.flickerControl.flickerMode = 0;
-			} else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETEXPOSURE;
-		} else if (MATCH("centre_weight")) {
-			if (!retval && MATCH("on"))
-				new_params.exposure.centreWeight = 1;
-			else if (!retval && MATCH("off"))
-				new_params.exposure.centreWeight = 2;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETEXPOSURE;
-		} else if (MATCH("gain")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				switch(val) {
-				case 1:
-					new_params.exposure.gain = 0;
-					break;
-				case 2:
-					new_params.exposure.gain = 1;
-					break;
-				case 4:
-					new_params.exposure.gain = 2;
-					break;
-				case 8:
-					new_params.exposure.gain = 3;
-					break;
-				default:
-					retval = -EINVAL;
-					break;
-				}
-				new_params.exposure.expMode = 1;
-				if(new_params.flickerControl.flickerMode != 0)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-				new_params.flickerControl.flickerMode = 0;
-				command_flags |= COMMAND_SETEXPOSURE;
-				if (new_params.exposure.gain >
-				    new_params.exposure.gainMode-1)
-					retval = -EINVAL;
-			}
-		} else if (MATCH("fine_exp")) {
-			if (!retval)
-				val = VALUE/2;
-
-			if (!retval) {
-				if (val < 256) {
-					/* 1-02 firmware limits fineExp/2 to 127*/
-					if (FIRMWARE_VERSION(1,2) && val > 127)
-						val = 127;
-					new_params.exposure.fineExp = val;
-					new_params.exposure.expMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-					if(new_params.flickerControl.flickerMode != 0)
-						command_flags |= COMMAND_SETFLICKERCTRL;
-					new_params.flickerControl.flickerMode = 0;
-					command_flags |= COMMAND_SETFLICKERCTRL;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("coarse_exp")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= MAX_EXP) {
-					if (FIRMWARE_VERSION(1,2) &&
-					    val > MAX_EXP_102)
-						val = MAX_EXP_102;
-					new_params.exposure.coarseExpLo =
-						val & 0xff;
-					new_params.exposure.coarseExpHi =
-						val >> 8;
-					new_params.exposure.expMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-					if(new_params.flickerControl.flickerMode != 0)
-						command_flags |= COMMAND_SETFLICKERCTRL;
-					new_params.flickerControl.flickerMode = 0;
-					command_flags |= COMMAND_SETFLICKERCTRL;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("red_comp")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val >= COMP_RED && val <= 255) {
-					new_params.exposure.redComp = val;
-					new_params.exposure.compMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("green1_comp")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val >= COMP_GREEN1 && val <= 255) {
-					new_params.exposure.green1Comp = val;
-					new_params.exposure.compMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("green2_comp")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val >= COMP_GREEN2 && val <= 255) {
-					new_params.exposure.green2Comp = val;
-					new_params.exposure.compMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("blue_comp")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val >= COMP_BLUE && val <= 255) {
-					new_params.exposure.blueComp = val;
-					new_params.exposure.compMode = 1;
-					command_flags |= COMMAND_SETEXPOSURE;
-				} else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("apcor_gain1")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				command_flags |= COMMAND_SETAPCOR;
-				if (val <= 0xff)
-					new_params.apcor.gain1 = val;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("apcor_gain2")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				command_flags |= COMMAND_SETAPCOR;
-				if (val <= 0xff)
-					new_params.apcor.gain2 = val;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("apcor_gain4")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				command_flags |= COMMAND_SETAPCOR;
-				if (val <= 0xff)
-					new_params.apcor.gain4 = val;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("apcor_gain8")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				command_flags |= COMMAND_SETAPCOR;
-				if (val <= 0xff)
-					new_params.apcor.gain8 = val;
-				else
-					retval = -EINVAL;
-			}
-		} else if (MATCH("vl_offset_gain1")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.vlOffset.gain1 = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETVLOFFSET;
-		} else if (MATCH("vl_offset_gain2")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.vlOffset.gain2 = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETVLOFFSET;
-		} else if (MATCH("vl_offset_gain4")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.vlOffset.gain4 = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETVLOFFSET;
-		} else if (MATCH("vl_offset_gain8")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.vlOffset.gain8 = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETVLOFFSET;
-		} else if (MATCH("flicker_control")) {
-			if (!retval && MATCH("on")) {
-				set_flicker(&new_params, &command_flags, 1);
-			} else if (!retval && MATCH("off")) {
-				set_flicker(&new_params, &command_flags, 0);
-			} else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETFLICKERCTRL;
-		} else if (MATCH("mains_frequency")) {
-			if (!retval && MATCH("50")) {
-				new_mains = 0;
-				new_params.flickerControl.coarseJump =
-					flicker_jumps[new_mains]
-					[new_params.sensorFps.baserate]
-					[new_params.sensorFps.divisor];
-				if (new_params.flickerControl.flickerMode)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-			} else if (!retval && MATCH("60")) {
-				new_mains = 1;
-				new_params.flickerControl.coarseJump =
-					flicker_jumps[new_mains]
-					[new_params.sensorFps.baserate]
-					[new_params.sensorFps.divisor];
-				if (new_params.flickerControl.flickerMode)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-			} else
-				retval = -EINVAL;
-		} else if (MATCH("allowable_overexposure")) {
-			if (!retval && MATCH("auto")) {
-				new_params.flickerControl.allowableOverExposure =
-					-find_over_exposure(new_params.colourParams.brightness);
-				if(new_params.flickerControl.flickerMode != 0)
-					command_flags |= COMMAND_SETFLICKERCTRL;
-			} else {
-				if (!retval)
-					val = VALUE;
-
-				if (!retval) {
-					if (val <= 0xff) {
-						new_params.flickerControl.
-							allowableOverExposure = val;
-						if(new_params.flickerControl.flickerMode != 0)
-							command_flags |= COMMAND_SETFLICKERCTRL;
-					} else
-						retval = -EINVAL;
-				}
-			}
-		} else if (MATCH("compression_mode")) {
-			if (!retval && MATCH("none"))
-				new_params.compression.mode =
-					CPIA_COMPRESSION_NONE;
-			else if (!retval && MATCH("auto"))
-				new_params.compression.mode =
-					CPIA_COMPRESSION_AUTO;
-			else if (!retval && MATCH("manual"))
-				new_params.compression.mode =
-					CPIA_COMPRESSION_MANUAL;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETCOMPRESSION;
-		} else if (MATCH("decimation_enable")) {
-			if (!retval && MATCH("off"))
-				new_params.compression.decimation = 0;
-			else if (!retval && MATCH("on"))
-				new_params.compression.decimation = 1;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETCOMPRESSION;
-		} else if (MATCH("compression_target")) {
-			if (!retval && MATCH("quality"))
-				new_params.compressionTarget.frTargeting =
-					CPIA_COMPRESSION_TARGET_QUALITY;
-			else if (!retval && MATCH("framerate"))
-				new_params.compressionTarget.frTargeting =
-					CPIA_COMPRESSION_TARGET_FRAMERATE;
-			else
-				retval = -EINVAL;
-
-			command_flags |= COMMAND_SETCOMPRESSIONTARGET;
-		} else if (MATCH("target_framerate")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if(val > 0 && val <= 30)
-					new_params.compressionTarget.targetFR = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONTARGET;
-		} else if (MATCH("target_quality")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if(val > 0 && val <= 64)
-					new_params.compressionTarget.targetQ = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONTARGET;
-		} else if (MATCH("y_threshold")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val < 32)
-					new_params.yuvThreshold.yThreshold = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETYUVTHRESH;
-		} else if (MATCH("uv_threshold")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val < 32)
-					new_params.yuvThreshold.uvThreshold = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETYUVTHRESH;
-		} else if (MATCH("hysteresis")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.hysteresis = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("threshold_max")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.threshMax = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("small_step")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.smallStep = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("large_step")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.largeStep = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("decimation_hysteresis")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.decimationHysteresis = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("fr_diff_step_thresh")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.frDiffStepThresh = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("q_diff_step_thresh")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.qDiffStepThresh = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("decimation_thresh_mod")) {
-			if (!retval)
-				val = VALUE;
-
-			if (!retval) {
-				if (val <= 0xff)
-					new_params.compressionParams.decimationThreshMod = val;
-				else
-					retval = -EINVAL;
-			}
-			command_flags |= COMMAND_SETCOMPRESSIONPARAMS;
-		} else if (MATCH("toplight")) {
-			if (!retval && MATCH("on"))
-				new_params.qx3.toplight = 1;
-			else if (!retval && MATCH("off"))
-				new_params.qx3.toplight = 0;
-			else
-				retval = -EINVAL;
-			command_flags |= COMMAND_SETLIGHTS;
-		} else if (MATCH("bottomlight")) {
-			if (!retval && MATCH("on"))
-				new_params.qx3.bottomlight = 1;
-			else if (!retval && MATCH("off"))
-				new_params.qx3.bottomlight = 0;
-			else
-				retval = -EINVAL;
-			command_flags |= COMMAND_SETLIGHTS;
-		} else {
-			DBG("No match found\n");
-			retval = -EINVAL;
-		}
-
-		if (!retval) {
-			while (count && isspace(*buffer) && *buffer != '\n') {
-				--count;
-				++buffer;
-			}
-			if (count) {
-				if (*buffer == '\0' && count != 1)
-					retval = -EINVAL;
-				else if (*buffer != '\n' && *buffer != ';' &&
-					 *buffer != '\0')
-					retval = -EINVAL;
-				else {
-					--count;
-					++buffer;
-				}
-			}
-		}
-	}
-#undef MATCH
-#undef VALUE
-#undef FIRMWARE_VERSION
-	if (!retval) {
-		if (command_flags & COMMAND_SETCOLOURPARAMS) {
-			/* Adjust cam->vp to reflect these changes */
-			cam->vp.brightness =
-				new_params.colourParams.brightness*65535/100;
-			cam->vp.contrast =
-				new_params.colourParams.contrast*65535/100;
-			cam->vp.colour =
-				new_params.colourParams.saturation*65535/100;
-		}
-		if((command_flags & COMMAND_SETEXPOSURE) &&
-		   new_params.exposure.expMode == 2)
-			cam->exposure_status = EXPOSURE_NORMAL;
-
-		memcpy(&cam->params, &new_params, sizeof(struct cam_params));
-		cam->mainsFreq = new_mains;
-		cam->cmd_queue |= command_flags;
-		retval = size;
-	} else
-		DBG("error: %d\n", retval);
-
-	mutex_unlock(&cam->param_lock);
-
-out:
-	free_page((unsigned long)page);
-	return retval;
-}
-
-static const struct file_operations cpia_proc_fops = {
-	.owner		= THIS_MODULE,
-	.open		= cpia_proc_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-	.write		= cpia_proc_write,
-};
-
-static void create_proc_cpia_cam(struct cam_data *cam)
-{
-	struct proc_dir_entry *ent;
-
-	if (!cpia_proc_root || !cam)
-		return;
-
-	ent = proc_create_data(video_device_node_name(&cam->vdev),
-			       S_IRUGO|S_IWUSR, cpia_proc_root,
-			       &cpia_proc_fops, cam);
-	if (!ent)
-		return;
-
-	/*
-	   size of the proc entry is 3736 bytes for the standard webcam;
-	   the extra features of the QX3 microscope add 189 bytes.
-	   (we have not yet probed the camera to see which type it is).
-	*/
-	ent->size = 3736 + 189;
-	cam->proc_entry = ent;
-}
-
-static void destroy_proc_cpia_cam(struct cam_data *cam)
-{
-	if (!cam || !cam->proc_entry)
-		return;
-
-	remove_proc_entry(video_device_node_name(&cam->vdev), cpia_proc_root);
-	cam->proc_entry = NULL;
-}
-
-static void proc_cpia_create(void)
-{
-	cpia_proc_root = proc_mkdir("cpia", NULL);
-
-	if (!cpia_proc_root)
-		LOG("Unable to initialise /proc/cpia\n");
-}
-
-static void __exit proc_cpia_destroy(void)
-{
-	remove_proc_entry("cpia", NULL);
-}
-#endif /* CONFIG_PROC_FS */
-
-/* ----------------------- debug functions ---------------------- */
-
-#define printstatus(cam) \
-  DBG("%02x %02x %02x %02x %02x %02x %02x %02x\n",\
-	cam->params.status.systemState, cam->params.status.grabState, \
-	cam->params.status.streamState, cam->params.status.fatalError, \
-	cam->params.status.cmdError, cam->params.status.debugFlags, \
-	cam->params.status.vpStatus, cam->params.status.errorCode);
-
-/* ----------------------- v4l helpers -------------------------- */
-
-/* supported frame palettes and depths */
-static inline int valid_mode(u16 palette, u16 depth)
-{
-	if ((palette == VIDEO_PALETTE_YUV422 && depth == 16) ||
-	    (palette == VIDEO_PALETTE_YUYV && depth == 16))
-		return 1;
-
-	if (colorspace_conv)
-		return (palette == VIDEO_PALETTE_GREY && depth == 8) ||
-		       (palette == VIDEO_PALETTE_RGB555 && depth == 16) ||
-		       (palette == VIDEO_PALETTE_RGB565 && depth == 16) ||
-		       (palette == VIDEO_PALETTE_RGB24 && depth == 24) ||
-		       (palette == VIDEO_PALETTE_RGB32 && depth == 32) ||
-		       (palette == VIDEO_PALETTE_UYVY && depth == 16);
-
-	return 0;
-}
-
-static int match_videosize( int width, int height )
-{
-	/* return the best match, where 'best' is as always
-	 * the largest that is not bigger than what is requested. */
-	if (width>=352 && height>=288)
-		return VIDEOSIZE_352_288; /* CIF */
-
-	if (width>=320 && height>=240)
-		return VIDEOSIZE_320_240; /* SIF */
-
-	if (width>=288 && height>=216)
-		return VIDEOSIZE_288_216;
-
-	if (width>=256 && height>=192)
-		return VIDEOSIZE_256_192;
-
-	if (width>=224 && height>=168)
-		return VIDEOSIZE_224_168;
-
-	if (width>=192 && height>=144)
-		return VIDEOSIZE_192_144;
-
-	if (width>=176 && height>=144)
-		return VIDEOSIZE_176_144; /* QCIF */
-
-	if (width>=160 && height>=120)
-		return VIDEOSIZE_160_120; /* QSIF */
-
-	if (width>=128 && height>=96)
-		return VIDEOSIZE_128_96;
-
-	if (width>=88 && height>=72)
-		return VIDEOSIZE_88_72;
-
-	if (width>=64 && height>=48)
-		return VIDEOSIZE_64_48;
-
-	if (width>=48 && height>=48)
-		return VIDEOSIZE_48_48;
-
-	return -1;
-}
-
-/* these are the capture sizes we support */
-static void set_vw_size(struct cam_data *cam)
-{
-	/* the col/row/start/end values are the result of simple math    */
-	/* study the SetROI-command in cpia developers guide p 2-22      */
-	/* streamStartLine is set to the recommended value in the cpia   */
-	/*  developers guide p 3-37                                      */
-	switch(cam->video_size) {
-	case VIDEOSIZE_CIF:
-		cam->vw.width = 352;
-		cam->vw.height = 288;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=0;
-		cam->params.roi.rowStart=0;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_SIF:
-		cam->vw.width = 320;
-		cam->vw.height = 240;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=2;
-		cam->params.roi.rowStart=6;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_288_216:
-		cam->vw.width = 288;
-		cam->vw.height = 216;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=4;
-		cam->params.roi.rowStart=9;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_256_192:
-		cam->vw.width = 256;
-		cam->vw.height = 192;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=6;
-		cam->params.roi.rowStart=12;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_224_168:
-		cam->vw.width = 224;
-		cam->vw.height = 168;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=8;
-		cam->params.roi.rowStart=15;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_192_144:
-		cam->vw.width = 192;
-		cam->vw.height = 144;
-		cam->params.format.videoSize=VIDEOSIZE_CIF;
-		cam->params.roi.colStart=10;
-		cam->params.roi.rowStart=18;
-		cam->params.streamStartLine = 120;
-		break;
-	case VIDEOSIZE_QCIF:
-		cam->vw.width = 176;
-		cam->vw.height = 144;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=0;
-		cam->params.roi.rowStart=0;
-		cam->params.streamStartLine = 60;
-		break;
-	case VIDEOSIZE_QSIF:
-		cam->vw.width = 160;
-		cam->vw.height = 120;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=1;
-		cam->params.roi.rowStart=3;
-		cam->params.streamStartLine = 60;
-		break;
-	case VIDEOSIZE_128_96:
-		cam->vw.width = 128;
-		cam->vw.height = 96;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=3;
-		cam->params.roi.rowStart=6;
-		cam->params.streamStartLine = 60;
-		break;
-	case VIDEOSIZE_88_72:
-		cam->vw.width = 88;
-		cam->vw.height = 72;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=5;
-		cam->params.roi.rowStart=9;
-		cam->params.streamStartLine = 60;
-		break;
-	case VIDEOSIZE_64_48:
-		cam->vw.width = 64;
-		cam->vw.height = 48;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=7;
-		cam->params.roi.rowStart=12;
-		cam->params.streamStartLine = 60;
-		break;
-	case VIDEOSIZE_48_48:
-		cam->vw.width = 48;
-		cam->vw.height = 48;
-		cam->params.format.videoSize=VIDEOSIZE_QCIF;
-		cam->params.roi.colStart=8;
-		cam->params.roi.rowStart=6;
-		cam->params.streamStartLine = 60;
-		break;
-	default:
-		LOG("bad videosize value: %d\n", cam->video_size);
-		return;
-	}
-
-	if(cam->vc.width == 0)
-		cam->vc.width = cam->vw.width;
-	if(cam->vc.height == 0)
-		cam->vc.height = cam->vw.height;
-
-	cam->params.roi.colStart += cam->vc.x >> 3;
-	cam->params.roi.colEnd = cam->params.roi.colStart +
-				 (cam->vc.width >> 3);
-	cam->params.roi.rowStart += cam->vc.y >> 2;
-	cam->params.roi.rowEnd = cam->params.roi.rowStart +
-				 (cam->vc.height >> 2);
-
-	return;
-}
-
-static int allocate_frame_buf(struct cam_data *cam)
-{
-	int i;
-
-	cam->frame_buf = rvmalloc(FRAME_NUM * CPIA_MAX_FRAME_SIZE);
-	if (!cam->frame_buf)
-		return -ENOBUFS;
-
-	for (i = 0; i < FRAME_NUM; i++)
-		cam->frame[i].data = cam->frame_buf + i * CPIA_MAX_FRAME_SIZE;
-
-	return 0;
-}
-
-static int free_frame_buf(struct cam_data *cam)
-{
-	int i;
-
-	rvfree(cam->frame_buf, FRAME_NUM*CPIA_MAX_FRAME_SIZE);
-	cam->frame_buf = NULL;
-	for (i=0; i < FRAME_NUM; i++)
-		cam->frame[i].data = NULL;
-
-	return 0;
-}
-
-
-static inline void free_frames(struct cpia_frame frame[FRAME_NUM])
-{
-	int i;
-
-	for (i=0; i < FRAME_NUM; i++)
-		frame[i].state = FRAME_UNUSED;
-	return;
-}
-
-/**********************************************************************
- *
- * General functions
- *
- **********************************************************************/
-/* send an arbitrary command to the camera */
-static int do_command(struct cam_data *cam, u16 command, u8 a, u8 b, u8 c, u8 d)
-{
-	int retval, datasize;
-	u8 cmd[8], data[8];
-
-	switch(command) {
-	case CPIA_COMMAND_GetCPIAVersion:
-	case CPIA_COMMAND_GetPnPID:
-	case CPIA_COMMAND_GetCameraStatus:
-	case CPIA_COMMAND_GetVPVersion:
-		datasize=8;
-		break;
-	case CPIA_COMMAND_GetColourParams:
-	case CPIA_COMMAND_GetColourBalance:
-	case CPIA_COMMAND_GetExposure:
-		mutex_lock(&cam->param_lock);
-		datasize=8;
-		break;
-	case CPIA_COMMAND_ReadMCPorts:
-	case CPIA_COMMAND_ReadVCRegs:
-		datasize = 4;
-		break;
-	default:
-		datasize=0;
-		break;
-	}
-
-	cmd[0] = command>>8;
-	cmd[1] = command&0xff;
-	cmd[2] = a;
-	cmd[3] = b;
-	cmd[4] = c;
-	cmd[5] = d;
-	cmd[6] = datasize;
-	cmd[7] = 0;
-
-	retval = cam->ops->transferCmd(cam->lowlevel_data, cmd, data);
-	if (retval) {
-		DBG("%x - failed, retval=%d\n", command, retval);
-		if (command == CPIA_COMMAND_GetColourParams ||
-		    command == CPIA_COMMAND_GetColourBalance ||
-		    command == CPIA_COMMAND_GetExposure)
-			mutex_unlock(&cam->param_lock);
-	} else {
-		switch(command) {
-		case CPIA_COMMAND_GetCPIAVersion:
-			cam->params.version.firmwareVersion = data[0];
-			cam->params.version.firmwareRevision = data[1];
-			cam->params.version.vcVersion = data[2];
-			cam->params.version.vcRevision = data[3];
-			break;
-		case CPIA_COMMAND_GetPnPID:
-			cam->params.pnpID.vendor = data[0]+(((u16)data[1])<<8);
-			cam->params.pnpID.product = data[2]+(((u16)data[3])<<8);
-			cam->params.pnpID.deviceRevision =
-				data[4]+(((u16)data[5])<<8);
-			break;
-		case CPIA_COMMAND_GetCameraStatus:
-			cam->params.status.systemState = data[0];
-			cam->params.status.grabState = data[1];
-			cam->params.status.streamState = data[2];
-			cam->params.status.fatalError = data[3];
-			cam->params.status.cmdError = data[4];
-			cam->params.status.debugFlags = data[5];
-			cam->params.status.vpStatus = data[6];
-			cam->params.status.errorCode = data[7];
-			break;
-		case CPIA_COMMAND_GetVPVersion:
-			cam->params.vpVersion.vpVersion = data[0];
-			cam->params.vpVersion.vpRevision = data[1];
-			cam->params.vpVersion.cameraHeadID =
-				data[2]+(((u16)data[3])<<8);
-			break;
-		case CPIA_COMMAND_GetColourParams:
-			cam->params.colourParams.brightness = data[0];
-			cam->params.colourParams.contrast = data[1];
-			cam->params.colourParams.saturation = data[2];
-			mutex_unlock(&cam->param_lock);
-			break;
-		case CPIA_COMMAND_GetColourBalance:
-			cam->params.colourBalance.redGain = data[0];
-			cam->params.colourBalance.greenGain = data[1];
-			cam->params.colourBalance.blueGain = data[2];
-			mutex_unlock(&cam->param_lock);
-			break;
-		case CPIA_COMMAND_GetExposure:
-			cam->params.exposure.gain = data[0];
-			cam->params.exposure.fineExp = data[1];
-			cam->params.exposure.coarseExpLo = data[2];
-			cam->params.exposure.coarseExpHi = data[3];
-			cam->params.exposure.redComp = data[4];
-			cam->params.exposure.green1Comp = data[5];
-			cam->params.exposure.green2Comp = data[6];
-			cam->params.exposure.blueComp = data[7];
-			mutex_unlock(&cam->param_lock);
-			break;
-
-		case CPIA_COMMAND_ReadMCPorts:
-			if (!cam->params.qx3.qx3_detected)
-				break;
-			/* test button press */
-			cam->params.qx3.button = ((data[1] & 0x02) == 0);
-			if (cam->params.qx3.button) {
-				/* button pressed - unlock the latch */
-				do_command(cam,CPIA_COMMAND_WriteMCPort,3,0xDF,0xDF,0);
-				do_command(cam,CPIA_COMMAND_WriteMCPort,3,0xFF,0xFF,0);
-			}
-
-			/* test whether microscope is cradled */
-			cam->params.qx3.cradled = ((data[2] & 0x40) == 0);
-			break;
-
-		default:
-			break;
-		}
-	}
-	return retval;
-}
-
-/* send a command  to the camera with an additional data transaction */
-static int do_command_extended(struct cam_data *cam, u16 command,
-			       u8 a, u8 b, u8 c, u8 d,
-			       u8 e, u8 f, u8 g, u8 h,
-			       u8 i, u8 j, u8 k, u8 l)
-{
-	int retval;
-	u8 cmd[8], data[8];
-
-	cmd[0] = command>>8;
-	cmd[1] = command&0xff;
-	cmd[2] = a;
-	cmd[3] = b;
-	cmd[4] = c;
-	cmd[5] = d;
-	cmd[6] = 8;
-	cmd[7] = 0;
-	data[0] = e;
-	data[1] = f;
-	data[2] = g;
-	data[3] = h;
-	data[4] = i;
-	data[5] = j;
-	data[6] = k;
-	data[7] = l;
-
-	retval = cam->ops->transferCmd(cam->lowlevel_data, cmd, data);
-	if (retval)
-		DBG("%x - failed\n", command);
-
-	return retval;
-}
-
-/**********************************************************************
- *
- * Colorspace conversion
- *
- **********************************************************************/
-#define LIMIT(x) ((((x)>0xffffff)?0xff0000:(((x)<=0xffff)?0:(x)&0xff0000))>>16)
-
-static int convert420(unsigned char *yuv, unsigned char *rgb, int out_fmt,
-		      int linesize, int mmap_kludge)
-{
-	int y, u, v, r, g, b, y1;
-
-	/* Odd lines use the same u and v as the previous line.
-	 * Because of compression, it is necessary to get this
-	 * information from the decoded image. */
-	switch(out_fmt) {
-	case VIDEO_PALETTE_RGB555:
-		y = (*yuv++ - 16) * 76310;
-		y1 = (*yuv - 16) * 76310;
-		r = ((*(rgb+1-linesize)) & 0x7c) << 1;
-		g = ((*(rgb-linesize)) & 0xe0) >> 4 |
-		    ((*(rgb+1-linesize)) & 0x03) << 6;
-		b = ((*(rgb-linesize)) & 0x1f) << 3;
-		u = (-53294 * r - 104635 * g + 157929 * b) / 5756495;
-		v = (157968 * r - 132278 * g - 25690 * b) / 5366159;
-		r = 104635 * v;
-		g = -25690 * u - 53294 * v;
-		b = 132278 * u;
-		*rgb++ = ((LIMIT(g+y) & 0xf8) << 2) | (LIMIT(b+y) >> 3);
-		*rgb++ = ((LIMIT(r+y) & 0xf8) >> 1) | (LIMIT(g+y) >> 6);
-		*rgb++ = ((LIMIT(g+y1) & 0xf8) << 2) | (LIMIT(b+y1) >> 3);
-		*rgb = ((LIMIT(r+y1) & 0xf8) >> 1) | (LIMIT(g+y1) >> 6);
-		return 4;
-	case VIDEO_PALETTE_RGB565:
-		y = (*yuv++ - 16) * 76310;
-		y1 = (*yuv - 16) * 76310;
-		r = (*(rgb+1-linesize)) & 0xf8;
-		g = ((*(rgb-linesize)) & 0xe0) >> 3 |
-		    ((*(rgb+1-linesize)) & 0x07) << 5;
-		b = ((*(rgb-linesize)) & 0x1f) << 3;
-		u = (-53294 * r - 104635 * g + 157929 * b) / 5756495;
-		v = (157968 * r - 132278 * g - 25690 * b) / 5366159;
-		r = 104635 * v;
-		g = -25690 * u - 53294 * v;
-		b = 132278 * u;
-		*rgb++ = ((LIMIT(g+y) & 0xfc) << 3) | (LIMIT(b+y) >> 3);
-		*rgb++ = (LIMIT(r+y) & 0xf8) | (LIMIT(g+y) >> 5);
-		*rgb++ = ((LIMIT(g+y1) & 0xfc) << 3) | (LIMIT(b+y1) >> 3);
-		*rgb = (LIMIT(r+y1) & 0xf8) | (LIMIT(g+y1) >> 5);
-		return 4;
-		break;
-	case VIDEO_PALETTE_RGB24:
-	case VIDEO_PALETTE_RGB32:
-		y = (*yuv++ - 16) * 76310;
-		y1 = (*yuv - 16) * 76310;
-		if (mmap_kludge) {
-			r = *(rgb+2-linesize);
-			g = *(rgb+1-linesize);
-			b = *(rgb-linesize);
-		} else {
-			r = *(rgb-linesize);
-			g = *(rgb+1-linesize);
-			b = *(rgb+2-linesize);
-		}
-		u = (-53294 * r - 104635 * g + 157929 * b) / 5756495;
-		v = (157968 * r - 132278 * g - 25690 * b) / 5366159;
-		r = 104635 * v;
-		g = -25690 * u + -53294 * v;
-		b = 132278 * u;
-		if (mmap_kludge) {
-			*rgb++ = LIMIT(b+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(r+y);
-			if(out_fmt == VIDEO_PALETTE_RGB32)
-				rgb++;
-			*rgb++ = LIMIT(b+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(r+y1);
-		} else {
-			*rgb++ = LIMIT(r+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(b+y);
-			if(out_fmt == VIDEO_PALETTE_RGB32)
-				rgb++;
-			*rgb++ = LIMIT(r+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(b+y1);
-		}
-		if(out_fmt == VIDEO_PALETTE_RGB32)
-			return 8;
-		return 6;
-	case VIDEO_PALETTE_YUV422:
-	case VIDEO_PALETTE_YUYV:
-		y = *yuv++;
-		u = *(rgb+1-linesize);
-		y1 = *yuv;
-		v = *(rgb+3-linesize);
-		*rgb++ = y;
-		*rgb++ = u;
-		*rgb++ = y1;
-		*rgb = v;
-		return 4;
-	case VIDEO_PALETTE_UYVY:
-		u = *(rgb-linesize);
-		y = *yuv++;
-		v = *(rgb+2-linesize);
-		y1 = *yuv;
-		*rgb++ = u;
-		*rgb++ = y;
-		*rgb++ = v;
-		*rgb = y1;
-		return 4;
-	case VIDEO_PALETTE_GREY:
-		*rgb++ = *yuv++;
-		*rgb = *yuv;
-		return 2;
-	default:
-		DBG("Empty: %d\n", out_fmt);
-		return 0;
-	}
-}
-
-
-static int yuvconvert(unsigned char *yuv, unsigned char *rgb, int out_fmt,
-		      int in_uyvy, int mmap_kludge)
-{
-	int y, u, v, r, g, b, y1;
-
-	switch(out_fmt) {
-	case VIDEO_PALETTE_RGB555:
-	case VIDEO_PALETTE_RGB565:
-	case VIDEO_PALETTE_RGB24:
-	case VIDEO_PALETTE_RGB32:
-		if (in_uyvy) {
-			u = *yuv++ - 128;
-			y = (*yuv++ - 16) * 76310;
-			v = *yuv++ - 128;
-			y1 = (*yuv - 16) * 76310;
-		} else {
-			y = (*yuv++ - 16) * 76310;
-			u = *yuv++ - 128;
-			y1 = (*yuv++ - 16) * 76310;
-			v = *yuv - 128;
-		}
-		r = 104635 * v;
-		g = -25690 * u + -53294 * v;
-		b = 132278 * u;
-		break;
-	default:
-		y = *yuv++;
-		u = *yuv++;
-		y1 = *yuv++;
-		v = *yuv;
-		/* Just to avoid compiler warnings */
-		r = 0;
-		g = 0;
-		b = 0;
-		break;
-	}
-	switch(out_fmt) {
-	case VIDEO_PALETTE_RGB555:
-		*rgb++ = ((LIMIT(g+y) & 0xf8) << 2) | (LIMIT(b+y) >> 3);
-		*rgb++ = ((LIMIT(r+y) & 0xf8) >> 1) | (LIMIT(g+y) >> 6);
-		*rgb++ = ((LIMIT(g+y1) & 0xf8) << 2) | (LIMIT(b+y1) >> 3);
-		*rgb = ((LIMIT(r+y1) & 0xf8) >> 1) | (LIMIT(g+y1) >> 6);
-		return 4;
-	case VIDEO_PALETTE_RGB565:
-		*rgb++ = ((LIMIT(g+y) & 0xfc) << 3) | (LIMIT(b+y) >> 3);
-		*rgb++ = (LIMIT(r+y) & 0xf8) | (LIMIT(g+y) >> 5);
-		*rgb++ = ((LIMIT(g+y1) & 0xfc) << 3) | (LIMIT(b+y1) >> 3);
-		*rgb = (LIMIT(r+y1) & 0xf8) | (LIMIT(g+y1) >> 5);
-		return 4;
-	case VIDEO_PALETTE_RGB24:
-		if (mmap_kludge) {
-			*rgb++ = LIMIT(b+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(r+y);
-			*rgb++ = LIMIT(b+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(r+y1);
-		} else {
-			*rgb++ = LIMIT(r+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(b+y);
-			*rgb++ = LIMIT(r+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(b+y1);
-		}
-		return 6;
-	case VIDEO_PALETTE_RGB32:
-		if (mmap_kludge) {
-			*rgb++ = LIMIT(b+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(r+y);
-			rgb++;
-			*rgb++ = LIMIT(b+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(r+y1);
-		} else {
-			*rgb++ = LIMIT(r+y);
-			*rgb++ = LIMIT(g+y);
-			*rgb++ = LIMIT(b+y);
-			rgb++;
-			*rgb++ = LIMIT(r+y1);
-			*rgb++ = LIMIT(g+y1);
-			*rgb = LIMIT(b+y1);
-		}
-		return 8;
-	case VIDEO_PALETTE_GREY:
-		*rgb++ = y;
-		*rgb = y1;
-		return 2;
-	case VIDEO_PALETTE_YUV422:
-	case VIDEO_PALETTE_YUYV:
-		*rgb++ = y;
-		*rgb++ = u;
-		*rgb++ = y1;
-		*rgb = v;
-		return 4;
-	case VIDEO_PALETTE_UYVY:
-		*rgb++ = u;
-		*rgb++ = y;
-		*rgb++ = v;
-		*rgb = y1;
-		return 4;
-	default:
-		DBG("Empty: %d\n", out_fmt);
-		return 0;
-	}
-}
-
-static int skipcount(int count, int fmt)
-{
-	switch(fmt) {
-	case VIDEO_PALETTE_GREY:
-		return count;
-	case VIDEO_PALETTE_RGB555:
-	case VIDEO_PALETTE_RGB565:
-	case VIDEO_PALETTE_YUV422:
-	case VIDEO_PALETTE_YUYV:
-	case VIDEO_PALETTE_UYVY:
-		return 2*count;
-	case VIDEO_PALETTE_RGB24:
-		return 3*count;
-	case VIDEO_PALETTE_RGB32:
-		return 4*count;
-	default:
-		return 0;
-	}
-}
-
-static int parse_picture(struct cam_data *cam, int size)
-{
-	u8 *obuf, *ibuf, *end_obuf;
-	int ll, in_uyvy, compressed, decimation, even_line, origsize, out_fmt;
-	int rows, cols, linesize, subsample_422;
-
-	/* make sure params don't change while we are decoding */
-	mutex_lock(&cam->param_lock);
-
-	obuf = cam->decompressed_frame.data;
-	end_obuf = obuf+CPIA_MAX_FRAME_SIZE;
-	ibuf = cam->raw_image;
-	origsize = size;
-	out_fmt = cam->vp.palette;
-
-	if ((ibuf[0] != MAGIC_0) || (ibuf[1] != MAGIC_1)) {
-		LOG("header not found\n");
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-
-	if ((ibuf[16] != VIDEOSIZE_QCIF) && (ibuf[16] != VIDEOSIZE_CIF)) {
-		LOG("wrong video size\n");
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-
-	if (ibuf[17] != SUBSAMPLE_420 && ibuf[17] != SUBSAMPLE_422) {
-		LOG("illegal subtype %d\n",ibuf[17]);
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-	subsample_422 = ibuf[17] == SUBSAMPLE_422;
-
-	if (ibuf[18] != YUVORDER_YUYV && ibuf[18] != YUVORDER_UYVY) {
-		LOG("illegal yuvorder %d\n",ibuf[18]);
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-	in_uyvy = ibuf[18] == YUVORDER_UYVY;
-
-	if ((ibuf[24] != cam->params.roi.colStart) ||
-	    (ibuf[25] != cam->params.roi.colEnd) ||
-	    (ibuf[26] != cam->params.roi.rowStart) ||
-	    (ibuf[27] != cam->params.roi.rowEnd)) {
-		LOG("ROI mismatch\n");
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-	cols = 8*(ibuf[25] - ibuf[24]);
-	rows = 4*(ibuf[27] - ibuf[26]);
-
-
-	if ((ibuf[28] != NOT_COMPRESSED) && (ibuf[28] != COMPRESSED)) {
-		LOG("illegal compression %d\n",ibuf[28]);
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-	compressed = (ibuf[28] == COMPRESSED);
-
-	if (ibuf[29] != NO_DECIMATION && ibuf[29] != DECIMATION_ENAB) {
-		LOG("illegal decimation %d\n",ibuf[29]);
-		mutex_unlock(&cam->param_lock);
-		return -1;
-	}
-	decimation = (ibuf[29] == DECIMATION_ENAB);
-
-	cam->params.yuvThreshold.yThreshold = ibuf[30];
-	cam->params.yuvThreshold.uvThreshold = ibuf[31];
-	cam->params.status.systemState = ibuf[32];
-	cam->params.status.grabState = ibuf[33];
-	cam->params.status.streamState = ibuf[34];
-	cam->params.status.fatalError = ibuf[35];
-	cam->params.status.cmdError = ibuf[36];
-	cam->params.status.debugFlags = ibuf[37];
-	cam->params.status.vpStatus = ibuf[38];
-	cam->params.status.errorCode = ibuf[39];
-	cam->fps = ibuf[41];
-	mutex_unlock(&cam->param_lock);
-
-	linesize = skipcount(cols, out_fmt);
-	ibuf += FRAME_HEADER_SIZE;
-	size -= FRAME_HEADER_SIZE;
-	ll = ibuf[0] | (ibuf[1] << 8);
-	ibuf += 2;
-	even_line = 1;
-
-	while (size > 0) {
-		size -= (ll+2);
-		if (size < 0) {
-			LOG("Insufficient data in buffer\n");
-			return -1;
-		}
-
-		while (ll > 1) {
-			if (!compressed || (compressed && !(*ibuf & 1))) {
-				if(subsample_422 || even_line) {
-				obuf += yuvconvert(ibuf, obuf, out_fmt,
-						   in_uyvy, cam->mmap_kludge);
-				ibuf += 4;
-				ll -= 4;
-			} else {
-					/* SUBSAMPLE_420 on an odd line */
-					obuf += convert420(ibuf, obuf,
-							   out_fmt, linesize,
-							   cam->mmap_kludge);
-					ibuf += 2;
-					ll -= 2;
-				}
-			} else {
-				/*skip compressed interval from previous frame*/
-				obuf += skipcount(*ibuf >> 1, out_fmt);
-				if (obuf > end_obuf) {
-					LOG("Insufficient buffer size\n");
-					return -1;
-				}
-				++ibuf;
-				ll--;
-			}
-		}
-		if (ll == 1) {
-			if (*ibuf != EOL) {
-				DBG("EOL not found giving up after %d/%d"
-				    " bytes\n", origsize-size, origsize);
-				return -1;
-			}
-
-			++ibuf; /* skip over EOL */
-
-			if ((size > 3) && (ibuf[0] == EOI) && (ibuf[1] == EOI) &&
-			   (ibuf[2] == EOI) && (ibuf[3] == EOI)) {
-				size -= 4;
-				break;
-			}
-
-			if(decimation) {
-				/* skip the odd lines for now */
-				obuf += linesize;
-			}
-
-			if (size > 1) {
-				ll = ibuf[0] | (ibuf[1] << 8);
-				ibuf += 2; /* skip over line length */
-			}
-			if(!decimation)
-				even_line = !even_line;
-		} else {
-			LOG("line length was not 1 but %d after %d/%d bytes\n",
-			    ll, origsize-size, origsize);
-			return -1;
-		}
-	}
-
-	if(decimation) {
-		/* interpolate odd rows */
-		int i, j;
-		u8 *prev, *next;
-		prev = cam->decompressed_frame.data;
-		obuf = prev+linesize;
-		next = obuf+linesize;
-		for(i=1; i<rows-1; i+=2) {
-			for(j=0; j<linesize; ++j) {
-				*obuf++ = ((int)*prev++ + *next++) / 2;
-			}
-			prev += linesize;
-			obuf += linesize;
-			next += linesize;
-		}
-		/* last row is odd, just copy previous row */
-		memcpy(obuf, prev, linesize);
-	}
-
-	cam->decompressed_frame.count = obuf-cam->decompressed_frame.data;
-
-	return cam->decompressed_frame.count;
-}
-
-/* InitStreamCap wrapper to select correct start line */
-static inline int init_stream_cap(struct cam_data *cam)
-{
-	return do_command(cam, CPIA_COMMAND_InitStreamCap,
-			  0, cam->params.streamStartLine, 0, 0);
-}
-
-
-/*  find_over_exposure
- *    Finds a suitable value of OverExposure for use with SetFlickerCtrl
- *    Some calculation is required because this value changes with the brightness
- *    set with SetColourParameters
- *
- *  Parameters: Brightness  -  last brightness value set with SetColourParameters
- *
- *  Returns: OverExposure value to use with SetFlickerCtrl
- */
-#define FLICKER_MAX_EXPOSURE                    250
-#define FLICKER_ALLOWABLE_OVER_EXPOSURE         146
-#define FLICKER_BRIGHTNESS_CONSTANT             59
-static int find_over_exposure(int brightness)
-{
-	int MaxAllowableOverExposure, OverExposure;
-
-	MaxAllowableOverExposure = FLICKER_MAX_EXPOSURE - brightness -
-				   FLICKER_BRIGHTNESS_CONSTANT;
-
-	if (MaxAllowableOverExposure < FLICKER_ALLOWABLE_OVER_EXPOSURE) {
-		OverExposure = MaxAllowableOverExposure;
-	} else {
-		OverExposure = FLICKER_ALLOWABLE_OVER_EXPOSURE;
-	}
-
-	return OverExposure;
-}
-#undef FLICKER_MAX_EXPOSURE
-#undef FLICKER_ALLOWABLE_OVER_EXPOSURE
-#undef FLICKER_BRIGHTNESS_CONSTANT
-
-/* update various camera modes and settings */
-static void dispatch_commands(struct cam_data *cam)
-{
-	mutex_lock(&cam->param_lock);
-	if (cam->cmd_queue==COMMAND_NONE) {
-		mutex_unlock(&cam->param_lock);
-		return;
-	}
-	DEB_BYTE(cam->cmd_queue);
-	DEB_BYTE(cam->cmd_queue>>8);
-	if (cam->cmd_queue & COMMAND_SETFORMAT) {
-		do_command(cam, CPIA_COMMAND_SetFormat,
-			   cam->params.format.videoSize,
-			   cam->params.format.subSample,
-			   cam->params.format.yuvOrder, 0);
-		do_command(cam, CPIA_COMMAND_SetROI,
-			   cam->params.roi.colStart, cam->params.roi.colEnd,
-			   cam->params.roi.rowStart, cam->params.roi.rowEnd);
-		cam->first_frame = 1;
-	}
-
-	if (cam->cmd_queue & COMMAND_SETCOLOURPARAMS)
-		do_command(cam, CPIA_COMMAND_SetColourParams,
-			   cam->params.colourParams.brightness,
-			   cam->params.colourParams.contrast,
-			   cam->params.colourParams.saturation, 0);
-
-	if (cam->cmd_queue & COMMAND_SETAPCOR)
-		do_command(cam, CPIA_COMMAND_SetApcor,
-			   cam->params.apcor.gain1,
-			   cam->params.apcor.gain2,
-			   cam->params.apcor.gain4,
-			   cam->params.apcor.gain8);
-
-	if (cam->cmd_queue & COMMAND_SETVLOFFSET)
-		do_command(cam, CPIA_COMMAND_SetVLOffset,
-			   cam->params.vlOffset.gain1,
-			   cam->params.vlOffset.gain2,
-			   cam->params.vlOffset.gain4,
-			   cam->params.vlOffset.gain8);
-
-	if (cam->cmd_queue & COMMAND_SETEXPOSURE) {
-		do_command_extended(cam, CPIA_COMMAND_SetExposure,
-				    cam->params.exposure.gainMode,
-				    1,
-				    cam->params.exposure.compMode,
-				    cam->params.exposure.centreWeight,
-				    cam->params.exposure.gain,
-				    cam->params.exposure.fineExp,
-				    cam->params.exposure.coarseExpLo,
-				    cam->params.exposure.coarseExpHi,
-				    cam->params.exposure.redComp,
-				    cam->params.exposure.green1Comp,
-				    cam->params.exposure.green2Comp,
-				    cam->params.exposure.blueComp);
-		if(cam->params.exposure.expMode != 1) {
-			do_command_extended(cam, CPIA_COMMAND_SetExposure,
-					    0,
-					    cam->params.exposure.expMode,
-					    0, 0,
-					    cam->params.exposure.gain,
-					    cam->params.exposure.fineExp,
-					    cam->params.exposure.coarseExpLo,
-					    cam->params.exposure.coarseExpHi,
-					    0, 0, 0, 0);
-		}
-	}
-
-	if (cam->cmd_queue & COMMAND_SETCOLOURBALANCE) {
-		if (cam->params.colourBalance.balanceMode == 1) {
-			do_command(cam, CPIA_COMMAND_SetColourBalance,
-				   1,
-				   cam->params.colourBalance.redGain,
-				   cam->params.colourBalance.greenGain,
-				   cam->params.colourBalance.blueGain);
-			do_command(cam, CPIA_COMMAND_SetColourBalance,
-				   3, 0, 0, 0);
-		}
-		if (cam->params.colourBalance.balanceMode == 2) {
-			do_command(cam, CPIA_COMMAND_SetColourBalance,
-				   2, 0, 0, 0);
-		}
-		if (cam->params.colourBalance.balanceMode == 3) {
-			do_command(cam, CPIA_COMMAND_SetColourBalance,
-				   3, 0, 0, 0);
-		}
-	}
-
-	if (cam->cmd_queue & COMMAND_SETCOMPRESSIONTARGET)
-		do_command(cam, CPIA_COMMAND_SetCompressionTarget,
-			   cam->params.compressionTarget.frTargeting,
-			   cam->params.compressionTarget.targetFR,
-			   cam->params.compressionTarget.targetQ, 0);
-
-	if (cam->cmd_queue & COMMAND_SETYUVTHRESH)
-		do_command(cam, CPIA_COMMAND_SetYUVThresh,
-			   cam->params.yuvThreshold.yThreshold,
-			   cam->params.yuvThreshold.uvThreshold, 0, 0);
-
-	if (cam->cmd_queue & COMMAND_SETCOMPRESSIONPARAMS)
-		do_command_extended(cam, CPIA_COMMAND_SetCompressionParams,
-			    0, 0, 0, 0,
-			    cam->params.compressionParams.hysteresis,
-			    cam->params.compressionParams.threshMax,
-			    cam->params.compressionParams.smallStep,
-			    cam->params.compressionParams.largeStep,
-			    cam->params.compressionParams.decimationHysteresis,
-			    cam->params.compressionParams.frDiffStepThresh,
-			    cam->params.compressionParams.qDiffStepThresh,
-			    cam->params.compressionParams.decimationThreshMod);
-
-	if (cam->cmd_queue & COMMAND_SETCOMPRESSION)
-		do_command(cam, CPIA_COMMAND_SetCompression,
-			   cam->params.compression.mode,
-			   cam->params.compression.decimation, 0, 0);
-
-	if (cam->cmd_queue & COMMAND_SETSENSORFPS)
-		do_command(cam, CPIA_COMMAND_SetSensorFPS,
-			   cam->params.sensorFps.divisor,
-			   cam->params.sensorFps.baserate, 0, 0);
-
-	if (cam->cmd_queue & COMMAND_SETFLICKERCTRL)
-		do_command(cam, CPIA_COMMAND_SetFlickerCtrl,
-			   cam->params.flickerControl.flickerMode,
-			   cam->params.flickerControl.coarseJump,
-			   abs(cam->params.flickerControl.allowableOverExposure),
-			   0);
-
-	if (cam->cmd_queue & COMMAND_SETECPTIMING)
-		do_command(cam, CPIA_COMMAND_SetECPTiming,
-			   cam->params.ecpTiming, 0, 0, 0);
-
-	if (cam->cmd_queue & COMMAND_PAUSE)
-		do_command(cam, CPIA_COMMAND_EndStreamCap, 0, 0, 0, 0);
-
-	if (cam->cmd_queue & COMMAND_RESUME)
-		init_stream_cap(cam);
-
-	if (cam->cmd_queue & COMMAND_SETLIGHTS && cam->params.qx3.qx3_detected)
-	  {
-	    int p1 = (cam->params.qx3.bottomlight == 0) << 1;
-	    int p2 = (cam->params.qx3.toplight == 0) << 3;
-	    do_command(cam, CPIA_COMMAND_WriteVCReg,  0x90, 0x8F, 0x50, 0);
-	    do_command(cam, CPIA_COMMAND_WriteMCPort, 2, 0, (p1|p2|0xE0), 0);
-	  }
-
-	cam->cmd_queue = COMMAND_NONE;
-	mutex_unlock(&cam->param_lock);
-	return;
-}
-
-
-
-static void set_flicker(struct cam_params *params, volatile u32 *command_flags,
-			int on)
-{
-	/* Everything in here is from the Windows driver */
-#define FIRMWARE_VERSION(x,y) (params->version.firmwareVersion == (x) && \
-			       params->version.firmwareRevision == (y))
-/* define for compgain calculation */
-#if 0
-#define COMPGAIN(base, curexp, newexp) \
-    (u8) ((((float) base - 128.0) * ((float) curexp / (float) newexp)) + 128.5)
-#define EXP_FROM_COMP(basecomp, curcomp, curexp) \
-    (u16)((float)curexp * (float)(u8)(curcomp + 128) / (float)(u8)(basecomp - 128))
-#else
-  /* equivalent functions without floating point math */
-#define COMPGAIN(base, curexp, newexp) \
-    (u8)(128 + (((u32)(2*(base-128)*curexp + newexp)) / (2* newexp)) )
-#define EXP_FROM_COMP(basecomp, curcomp, curexp) \
-     (u16)(((u32)(curexp * (u8)(curcomp + 128)) / (u8)(basecomp - 128)))
-#endif
-
-
-	int currentexp = params->exposure.coarseExpLo +
-			 params->exposure.coarseExpHi*256;
-	int startexp;
-	if (on) {
-		int cj = params->flickerControl.coarseJump;
-		params->flickerControl.flickerMode = 1;
-		params->flickerControl.disabled = 0;
-		if(params->exposure.expMode != 2)
-			*command_flags |= COMMAND_SETEXPOSURE;
-		params->exposure.expMode = 2;
-		currentexp = currentexp << params->exposure.gain;
-		params->exposure.gain = 0;
-		/* round down current exposure to nearest value */
-		startexp = (currentexp + ROUND_UP_EXP_FOR_FLICKER) / cj;
-		if(startexp < 1)
-			startexp = 1;
-		startexp = (startexp * cj) - 1;
-		if(FIRMWARE_VERSION(1,2))
-			while(startexp > MAX_EXP_102)
-				startexp -= cj;
-		else
-			while(startexp > MAX_EXP)
-				startexp -= cj;
-		params->exposure.coarseExpLo = startexp & 0xff;
-		params->exposure.coarseExpHi = startexp >> 8;
-		if (currentexp > startexp) {
-			if (currentexp > (2 * startexp))
-				currentexp = 2 * startexp;
-			params->exposure.redComp = COMPGAIN (COMP_RED, currentexp, startexp);
-			params->exposure.green1Comp = COMPGAIN (COMP_GREEN1, currentexp, startexp);
-			params->exposure.green2Comp = COMPGAIN (COMP_GREEN2, currentexp, startexp);
-			params->exposure.blueComp = COMPGAIN (COMP_BLUE, currentexp, startexp);
-		} else {
-			params->exposure.redComp = COMP_RED;
-			params->exposure.green1Comp = COMP_GREEN1;
-			params->exposure.green2Comp = COMP_GREEN2;
-			params->exposure.blueComp = COMP_BLUE;
-		}
-		if(FIRMWARE_VERSION(1,2))
-			params->exposure.compMode = 0;
-		else
-			params->exposure.compMode = 1;
-
-		params->apcor.gain1 = 0x18;
-		params->apcor.gain2 = 0x18;
-		params->apcor.gain4 = 0x16;
-		params->apcor.gain8 = 0x14;
-		*command_flags |= COMMAND_SETAPCOR;
-	} else {
-		params->flickerControl.flickerMode = 0;
-		params->flickerControl.disabled = 1;
-		/* Coarse = average of equivalent coarse for each comp channel */
-		startexp = EXP_FROM_COMP(COMP_RED, params->exposure.redComp, currentexp);
-		startexp += EXP_FROM_COMP(COMP_GREEN1, params->exposure.green1Comp, currentexp);
-		startexp += EXP_FROM_COMP(COMP_GREEN2, params->exposure.green2Comp, currentexp);
-		startexp += EXP_FROM_COMP(COMP_BLUE, params->exposure.blueComp, currentexp);
-		startexp = startexp >> 2;
-		while(startexp > MAX_EXP &&
-		      params->exposure.gain < params->exposure.gainMode-1) {
-			startexp = startexp >> 1;
-			++params->exposure.gain;
-		}
-		if(FIRMWARE_VERSION(1,2) && startexp > MAX_EXP_102)
-			startexp = MAX_EXP_102;
-		if(startexp > MAX_EXP)
-			startexp = MAX_EXP;
-		params->exposure.coarseExpLo = startexp&0xff;
-		params->exposure.coarseExpHi = startexp >> 8;
-		params->exposure.redComp = COMP_RED;
-		params->exposure.green1Comp = COMP_GREEN1;
-		params->exposure.green2Comp = COMP_GREEN2;
-		params->exposure.blueComp = COMP_BLUE;
-		params->exposure.compMode = 1;
-		*command_flags |= COMMAND_SETEXPOSURE;
-		params->apcor.gain1 = 0x18;
-		params->apcor.gain2 = 0x16;
-		params->apcor.gain4 = 0x24;
-		params->apcor.gain8 = 0x34;
-		*command_flags |= COMMAND_SETAPCOR;
-	}
-	params->vlOffset.gain1 = 20;
-	params->vlOffset.gain2 = 24;
-	params->vlOffset.gain4 = 26;
-	params->vlOffset.gain8 = 26;
-	*command_flags |= COMMAND_SETVLOFFSET;
-#undef FIRMWARE_VERSION
-#undef EXP_FROM_COMP
-#undef COMPGAIN
-}
-
-#define FIRMWARE_VERSION(x,y) (cam->params.version.firmwareVersion == (x) && \
-			       cam->params.version.firmwareRevision == (y))
-/* monitor the exposure and adjust the sensor frame rate if needed */
-static void monitor_exposure(struct cam_data *cam)
-{
-	u8 exp_acc, bcomp, gain, coarseL, cmd[8], data[8];
-	int retval, light_exp, dark_exp, very_dark_exp;
-	int old_exposure, new_exposure, framerate;
-
-	/* get necessary stats and register settings from camera */
-	/* do_command can't handle this, so do it ourselves */
-	cmd[0] = CPIA_COMMAND_ReadVPRegs>>8;
-	cmd[1] = CPIA_COMMAND_ReadVPRegs&0xff;
-	cmd[2] = 30;
-	cmd[3] = 4;
-	cmd[4] = 9;
-	cmd[5] = 8;
-	cmd[6] = 8;
-	cmd[7] = 0;
-	retval = cam->ops->transferCmd(cam->lowlevel_data, cmd, data);
-	if (retval) {
-		LOG("ReadVPRegs(30,4,9,8) - failed, retval=%d\n",
-		    retval);
-		return;
-	}
-	exp_acc = data[0];
-	bcomp = data[1];
-	gain = data[2];
-	coarseL = data[3];
-
-	mutex_lock(&cam->param_lock);
-	light_exp = cam->params.colourParams.brightness +
-		    TC - 50 + EXP_ACC_LIGHT;
-	if(light_exp > 255)
-		light_exp = 255;
-	dark_exp = cam->params.colourParams.brightness +
-		   TC - 50 - EXP_ACC_DARK;
-	if(dark_exp < 0)
-		dark_exp = 0;
-	very_dark_exp = dark_exp/2;
-
-	old_exposure = cam->params.exposure.coarseExpHi * 256 +
-		       cam->params.exposure.coarseExpLo;
-
-	if(!cam->params.flickerControl.disabled) {
-		/* Flicker control on */
-		int max_comp = FIRMWARE_VERSION(1,2) ? MAX_COMP : HIGH_COMP_102;
-		bcomp += 128;	/* decode */
-		if(bcomp >= max_comp && exp_acc < dark_exp) {
-			/* dark */
-			if(exp_acc < very_dark_exp) {
-				/* very dark */
-				if(cam->exposure_status == EXPOSURE_VERY_DARK)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_VERY_DARK;
-					cam->exposure_count = 1;
-				}
-			} else {
-				/* just dark */
-				if(cam->exposure_status == EXPOSURE_DARK)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_DARK;
-					cam->exposure_count = 1;
-				}
-			}
-		} else if(old_exposure <= LOW_EXP || exp_acc > light_exp) {
-			/* light */
-			if(old_exposure <= VERY_LOW_EXP) {
-				/* very light */
-				if(cam->exposure_status == EXPOSURE_VERY_LIGHT)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_VERY_LIGHT;
-					cam->exposure_count = 1;
-				}
-			} else {
-				/* just light */
-				if(cam->exposure_status == EXPOSURE_LIGHT)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_LIGHT;
-					cam->exposure_count = 1;
-				}
-			}
-		} else {
-			/* not dark or light */
-			cam->exposure_status = EXPOSURE_NORMAL;
-		}
-	} else {
-		/* Flicker control off */
-		if(old_exposure >= MAX_EXP && exp_acc < dark_exp) {
-			/* dark */
-			if(exp_acc < very_dark_exp) {
-				/* very dark */
-				if(cam->exposure_status == EXPOSURE_VERY_DARK)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_VERY_DARK;
-					cam->exposure_count = 1;
-				}
-			} else {
-				/* just dark */
-				if(cam->exposure_status == EXPOSURE_DARK)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_DARK;
-					cam->exposure_count = 1;
-				}
-			}
-		} else if(old_exposure <= LOW_EXP || exp_acc > light_exp) {
-			/* light */
-			if(old_exposure <= VERY_LOW_EXP) {
-				/* very light */
-				if(cam->exposure_status == EXPOSURE_VERY_LIGHT)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_VERY_LIGHT;
-					cam->exposure_count = 1;
-				}
-			} else {
-				/* just light */
-				if(cam->exposure_status == EXPOSURE_LIGHT)
-					++cam->exposure_count;
-				else {
-					cam->exposure_status = EXPOSURE_LIGHT;
-					cam->exposure_count = 1;
-				}
-			}
-		} else {
-			/* not dark or light */
-			cam->exposure_status = EXPOSURE_NORMAL;
-		}
-	}
-
-	framerate = cam->fps;
-	if(framerate > 30 || framerate < 1)
-		framerate = 1;
-
-	if(!cam->params.flickerControl.disabled) {
-		/* Flicker control on */
-		if((cam->exposure_status == EXPOSURE_VERY_DARK ||
-		    cam->exposure_status == EXPOSURE_DARK) &&
-		   cam->exposure_count >= DARK_TIME*framerate &&
-		   cam->params.sensorFps.divisor < 3) {
-
-			/* dark for too long */
-			++cam->params.sensorFps.divisor;
-			cam->cmd_queue |= COMMAND_SETSENSORFPS;
-
-			cam->params.flickerControl.coarseJump =
-				flicker_jumps[cam->mainsFreq]
-					     [cam->params.sensorFps.baserate]
-					     [cam->params.sensorFps.divisor];
-			cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
-
-			new_exposure = cam->params.flickerControl.coarseJump-1;
-			while(new_exposure < old_exposure/2)
-				new_exposure += cam->params.flickerControl.coarseJump;
-			cam->params.exposure.coarseExpLo = new_exposure & 0xff;
-			cam->params.exposure.coarseExpHi = new_exposure >> 8;
-			cam->cmd_queue |= COMMAND_SETEXPOSURE;
-			cam->exposure_status = EXPOSURE_NORMAL;
-			LOG("Automatically decreasing sensor_fps\n");
-
-		} else if((cam->exposure_status == EXPOSURE_VERY_LIGHT ||
-		    cam->exposure_status == EXPOSURE_LIGHT) &&
-		   cam->exposure_count >= LIGHT_TIME*framerate &&
-		   cam->params.sensorFps.divisor > 0) {
-
-			/* light for too long */
-			int max_exp = FIRMWARE_VERSION(1,2) ? MAX_EXP_102 : MAX_EXP ;
-
-			--cam->params.sensorFps.divisor;
-			cam->cmd_queue |= COMMAND_SETSENSORFPS;
-
-			cam->params.flickerControl.coarseJump =
-				flicker_jumps[cam->mainsFreq]
-					     [cam->params.sensorFps.baserate]
-					     [cam->params.sensorFps.divisor];
-			cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
-
-			new_exposure = cam->params.flickerControl.coarseJump-1;
-			while(new_exposure < 2*old_exposure &&
-			      new_exposure+
-			      cam->params.flickerControl.coarseJump < max_exp)
-				new_exposure += cam->params.flickerControl.coarseJump;
-			cam->params.exposure.coarseExpLo = new_exposure & 0xff;
-			cam->params.exposure.coarseExpHi = new_exposure >> 8;
-			cam->cmd_queue |= COMMAND_SETEXPOSURE;
-			cam->exposure_status = EXPOSURE_NORMAL;
-			LOG("Automatically increasing sensor_fps\n");
-		}
-	} else {
-		/* Flicker control off */
-		if((cam->exposure_status == EXPOSURE_VERY_DARK ||
-		    cam->exposure_status == EXPOSURE_DARK) &&
-		   cam->exposure_count >= DARK_TIME*framerate &&
-		   cam->params.sensorFps.divisor < 3) {
-
-			/* dark for too long */
-			++cam->params.sensorFps.divisor;
-			cam->cmd_queue |= COMMAND_SETSENSORFPS;
-
-			if(cam->params.exposure.gain > 0) {
-				--cam->params.exposure.gain;
-				cam->cmd_queue |= COMMAND_SETEXPOSURE;
-			}
-			cam->exposure_status = EXPOSURE_NORMAL;
-			LOG("Automatically decreasing sensor_fps\n");
-
-		} else if((cam->exposure_status == EXPOSURE_VERY_LIGHT ||
-		    cam->exposure_status == EXPOSURE_LIGHT) &&
-		   cam->exposure_count >= LIGHT_TIME*framerate &&
-		   cam->params.sensorFps.divisor > 0) {
-
-			/* light for too long */
-			--cam->params.sensorFps.divisor;
-			cam->cmd_queue |= COMMAND_SETSENSORFPS;
-
-			if(cam->params.exposure.gain <
-			   cam->params.exposure.gainMode-1) {
-				++cam->params.exposure.gain;
-				cam->cmd_queue |= COMMAND_SETEXPOSURE;
-			}
-			cam->exposure_status = EXPOSURE_NORMAL;
-			LOG("Automatically increasing sensor_fps\n");
-		}
-	}
-	mutex_unlock(&cam->param_lock);
-}
-
-/*-----------------------------------------------------------------*/
-/* if flicker is switched off, this function switches it back on.It checks,
-   however, that conditions are suitable before restarting it.
-   This should only be called for firmware version 1.2.
-
-   It also adjust the colour balance when an exposure step is detected - as
-   long as flicker is running
-*/
-static void restart_flicker(struct cam_data *cam)
-{
-	int cam_exposure, old_exp;
-	if(!FIRMWARE_VERSION(1,2))
-		return;
-	mutex_lock(&cam->param_lock);
-	if(cam->params.flickerControl.flickerMode == 0 ||
-	   cam->raw_image[39] == 0) {
-		mutex_unlock(&cam->param_lock);
-		return;
-	}
-	cam_exposure = cam->raw_image[39]*2;
-	old_exp = cam->params.exposure.coarseExpLo +
-		  cam->params.exposure.coarseExpHi*256;
-	/*
-	  see how far away camera exposure is from a valid
-	  flicker exposure value
-	*/
-	cam_exposure %= cam->params.flickerControl.coarseJump;
-	if(!cam->params.flickerControl.disabled &&
-	   cam_exposure <= cam->params.flickerControl.coarseJump - 3) {
-		/* Flicker control auto-disabled */
-		cam->params.flickerControl.disabled = 1;
-	}
-
-	if(cam->params.flickerControl.disabled &&
-	   cam->params.flickerControl.flickerMode &&
-	   old_exp > cam->params.flickerControl.coarseJump +
-		     ROUND_UP_EXP_FOR_FLICKER) {
-		/* exposure is now high enough to switch
-		   flicker control back on */
-		set_flicker(&cam->params, &cam->cmd_queue, 1);
-		if((cam->cmd_queue & COMMAND_SETEXPOSURE) &&
-		   cam->params.exposure.expMode == 2)
-			cam->exposure_status = EXPOSURE_NORMAL;
-
-	}
-	mutex_unlock(&cam->param_lock);
-}
-#undef FIRMWARE_VERSION
-
-static int clear_stall(struct cam_data *cam)
-{
-	/* FIXME: Does this actually work? */
-	LOG("Clearing stall\n");
-
-	cam->ops->streamRead(cam->lowlevel_data, cam->raw_image, 0);
-	do_command(cam, CPIA_COMMAND_GetCameraStatus,0,0,0,0);
-	return cam->params.status.streamState != STREAM_PAUSED;
-}
-
-/* kernel thread function to read image from camera */
-static int fetch_frame(void *data)
-{
-	int image_size, retry;
-	struct cam_data *cam = (struct cam_data *)data;
-	unsigned long oldjif, rate, diff;
-
-	/* Allow up to two bad images in a row to be read and
-	 * ignored before an error is reported */
-	for (retry = 0; retry < 3; ++retry) {
-		if (retry)
-			DBG("retry=%d\n", retry);
-
-		if (!cam->ops)
-			continue;
-
-		/* load first frame always uncompressed */
-		if (cam->first_frame &&
-		    cam->params.compression.mode != CPIA_COMPRESSION_NONE) {
-			do_command(cam, CPIA_COMMAND_SetCompression,
-				   CPIA_COMPRESSION_NONE,
-				   NO_DECIMATION, 0, 0);
-			/* Trial & error - Discarding a frame prevents the
-			   first frame from having an error in the data. */
-			do_command(cam, CPIA_COMMAND_DiscardFrame, 0, 0, 0, 0);
-		}
-
-		/* init camera upload */
-		if (do_command(cam, CPIA_COMMAND_GrabFrame, 0,
-			       cam->params.streamStartLine, 0, 0))
-			continue;
-
-		if (cam->ops->wait_for_stream_ready) {
-			/* loop until image ready */
-			int count = 0;
-			do_command(cam, CPIA_COMMAND_GetCameraStatus,0,0,0,0);
-			while (cam->params.status.streamState != STREAM_READY) {
-				if(++count > READY_TIMEOUT)
-					break;
-				if(cam->params.status.streamState ==
-				   STREAM_PAUSED) {
-					/* Bad news */
-					if(!clear_stall(cam))
-						return -EIO;
-				}
-
-				cond_resched();
-
-				/* sleep for 10 ms, hopefully ;) */
-				msleep_interruptible(10);
-				if (signal_pending(current))
-					return -EINTR;
-
-				do_command(cam, CPIA_COMMAND_GetCameraStatus,
-					   0, 0, 0, 0);
-			}
-			if(cam->params.status.streamState != STREAM_READY) {
-				continue;
-			}
-		}
-
-		cond_resched();
-
-		/* grab image from camera */
-		oldjif = jiffies;
-		image_size = cam->ops->streamRead(cam->lowlevel_data,
-						  cam->raw_image, 0);
-		if (image_size <= 0) {
-			DBG("streamRead failed: %d\n", image_size);
-			continue;
-		}
-
-		rate = image_size * HZ / 1024;
-		diff = jiffies-oldjif;
-		cam->transfer_rate = diff==0 ? rate : rate/diff;
-			/* diff==0 ? unlikely but possible */
-
-		/* Switch flicker control back on if it got turned off */
-		restart_flicker(cam);
-
-		/* If AEC is enabled, monitor the exposure and
-		   adjust the sensor frame rate if needed */
-		if(cam->params.exposure.expMode == 2)
-			monitor_exposure(cam);
-
-		/* camera idle now so dispatch queued commands */
-		dispatch_commands(cam);
-
-		/* Update our knowledge of the camera state */
-		do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0);
-		do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0);
-		do_command(cam, CPIA_COMMAND_ReadMCPorts, 0, 0, 0, 0);
-
-		/* decompress and convert image to by copying it from
-		 * raw_image to decompressed_frame
-		 */
-
-		cond_resched();
-
-		cam->image_size = parse_picture(cam, image_size);
-		if (cam->image_size <= 0) {
-			DBG("parse_picture failed %d\n", cam->image_size);
-			if(cam->params.compression.mode !=
-			   CPIA_COMPRESSION_NONE) {
-				/* Compression may not work right if we
-				   had a bad frame, get the next one
-				   uncompressed. */
-				cam->first_frame = 1;
-				do_command(cam, CPIA_COMMAND_SetGrabMode,
-					   CPIA_GRAB_SINGLE, 0, 0, 0);
-				/* FIXME: Trial & error - need up to 70ms for
-				   the grab mode change to complete ? */
-				msleep_interruptible(70);
-				if (signal_pending(current))
-					return -EINTR;
-			}
-		} else
-			break;
-	}
-
-	if (retry < 3) {
-		/* FIXME: this only works for double buffering */
-		if (cam->frame[cam->curframe].state == FRAME_READY) {
-			memcpy(cam->frame[cam->curframe].data,
-			       cam->decompressed_frame.data,
-			       cam->decompressed_frame.count);
-			cam->frame[cam->curframe].state = FRAME_DONE;
-		} else
-			cam->decompressed_frame.state = FRAME_DONE;
-
-		if (cam->first_frame) {
-			cam->first_frame = 0;
-			do_command(cam, CPIA_COMMAND_SetCompression,
-				   cam->params.compression.mode,
-				   cam->params.compression.decimation, 0, 0);
-
-			/* Switch from single-grab to continuous grab */
-			do_command(cam, CPIA_COMMAND_SetGrabMode,
-				   CPIA_GRAB_CONTINUOUS, 0, 0, 0);
-		}
-		return 0;
-	}
-	return -EIO;
-}
-
-static int capture_frame(struct cam_data *cam, struct video_mmap *vm)
-{
-	if (!cam->frame_buf) {
-		/* we do lazy allocation */
-		int err;
-		if ((err = allocate_frame_buf(cam)))
-			return err;
-	}
-
-	cam->curframe = vm->frame;
-	cam->frame[cam->curframe].state = FRAME_READY;
-	return fetch_frame(cam);
-}
-
-static int goto_high_power(struct cam_data *cam)
-{
-	if (do_command(cam, CPIA_COMMAND_GotoHiPower, 0, 0, 0, 0))
-		return -EIO;
-	msleep_interruptible(40);	/* windows driver does it too */
-	if(signal_pending(current))
-		return -EINTR;
-	if (do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0))
-		return -EIO;
-	if (cam->params.status.systemState == HI_POWER_STATE) {
-		DBG("camera now in HIGH power state\n");
-		return 0;
-	}
-	printstatus(cam);
-	return -EIO;
-}
-
-static int goto_low_power(struct cam_data *cam)
-{
-	if (do_command(cam, CPIA_COMMAND_GotoLoPower, 0, 0, 0, 0))
-		return -1;
-	if (do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0))
-		return -1;
-	if (cam->params.status.systemState == LO_POWER_STATE) {
-		DBG("camera now in LOW power state\n");
-		return 0;
-	}
-	printstatus(cam);
-	return -1;
-}
-
-static void save_camera_state(struct cam_data *cam)
-{
-	if(!(cam->cmd_queue & COMMAND_SETCOLOURBALANCE))
-		do_command(cam, CPIA_COMMAND_GetColourBalance, 0, 0, 0, 0);
-	if(!(cam->cmd_queue & COMMAND_SETEXPOSURE))
-		do_command(cam, CPIA_COMMAND_GetExposure, 0, 0, 0, 0);
-
-	DBG("%d/%d/%d/%d/%d/%d/%d/%d\n",
-	     cam->params.exposure.gain,
-	     cam->params.exposure.fineExp,
-	     cam->params.exposure.coarseExpLo,
-	     cam->params.exposure.coarseExpHi,
-	     cam->params.exposure.redComp,
-	     cam->params.exposure.green1Comp,
-	     cam->params.exposure.green2Comp,
-	     cam->params.exposure.blueComp);
-	DBG("%d/%d/%d\n",
-	     cam->params.colourBalance.redGain,
-	     cam->params.colourBalance.greenGain,
-	     cam->params.colourBalance.blueGain);
-}
-
-static int set_camera_state(struct cam_data *cam)
-{
-	cam->cmd_queue = COMMAND_SETCOMPRESSION |
-			 COMMAND_SETCOMPRESSIONTARGET |
-			 COMMAND_SETCOLOURPARAMS |
-			 COMMAND_SETFORMAT |
-			 COMMAND_SETYUVTHRESH |
-			 COMMAND_SETECPTIMING |
-			 COMMAND_SETCOMPRESSIONPARAMS |
-			 COMMAND_SETEXPOSURE |
-			 COMMAND_SETCOLOURBALANCE |
-			 COMMAND_SETSENSORFPS |
-			 COMMAND_SETAPCOR |
-			 COMMAND_SETFLICKERCTRL |
-			 COMMAND_SETVLOFFSET;
-
-	do_command(cam, CPIA_COMMAND_SetGrabMode, CPIA_GRAB_SINGLE,0,0,0);
-	dispatch_commands(cam);
-
-	/* Wait 6 frames for the sensor to get all settings and
-	   AEC/ACB to settle */
-	msleep_interruptible(6*(cam->params.sensorFps.baserate ? 33 : 40) *
-			       (1 << cam->params.sensorFps.divisor) + 10);
-
-	if(signal_pending(current))
-		return -EINTR;
-
-	save_camera_state(cam);
-
-	return 0;
-}
-
-static void get_version_information(struct cam_data *cam)
-{
-	/* GetCPIAVersion */
-	do_command(cam, CPIA_COMMAND_GetCPIAVersion, 0, 0, 0, 0);
-
-	/* GetPnPID */
-	do_command(cam, CPIA_COMMAND_GetPnPID, 0, 0, 0, 0);
-}
-
-/* initialize camera */
-static int reset_camera(struct cam_data *cam)
-{
-	int err;
-	/* Start the camera in low power mode */
-	if (goto_low_power(cam)) {
-		if (cam->params.status.systemState != WARM_BOOT_STATE)
-			return -ENODEV;
-
-		/* FIXME: this is just dirty trial and error */
-		err = goto_high_power(cam);
-		if(err)
-			return err;
-		do_command(cam, CPIA_COMMAND_DiscardFrame, 0, 0, 0, 0);
-		if (goto_low_power(cam))
-			return -ENODEV;
-	}
-
-	/* procedure described in developer's guide p3-28 */
-
-	/* Check the firmware version. */
-	cam->params.version.firmwareVersion = 0;
-	get_version_information(cam);
-	if (cam->params.version.firmwareVersion != 1)
-		return -ENODEV;
-
-	/* A bug in firmware 1-02 limits gainMode to 2 */
-	if(cam->params.version.firmwareRevision <= 2 &&
-	   cam->params.exposure.gainMode > 2) {
-		cam->params.exposure.gainMode = 2;
-	}
-
-	/* set QX3 detected flag */
-	cam->params.qx3.qx3_detected = (cam->params.pnpID.vendor == 0x0813 &&
-					cam->params.pnpID.product == 0x0001);
-
-	/* The fatal error checking should be done after
-	 * the camera powers up (developer's guide p 3-38) */
-
-	/* Set streamState before transition to high power to avoid bug
-	 * in firmware 1-02 */
-	do_command(cam, CPIA_COMMAND_ModifyCameraStatus, STREAMSTATE, 0,
-		   STREAM_NOT_READY, 0);
-
-	/* GotoHiPower */
-	err = goto_high_power(cam);
-	if (err)
-		return err;
-
-	/* Check the camera status */
-	if (do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0))
-		return -EIO;
-
-	if (cam->params.status.fatalError) {
-		DBG("fatal_error:              %#04x\n",
-		    cam->params.status.fatalError);
-		DBG("vp_status:                %#04x\n",
-		    cam->params.status.vpStatus);
-		if (cam->params.status.fatalError & ~(COM_FLAG|CPIA_FLAG)) {
-			/* Fatal error in camera */
-			return -EIO;
-		} else if (cam->params.status.fatalError & (COM_FLAG|CPIA_FLAG)) {
-			/* Firmware 1-02 may do this for parallel port cameras,
-			 * just clear the flags (developer's guide p 3-38) */
-			do_command(cam, CPIA_COMMAND_ModifyCameraStatus,
-				   FATALERROR, ~(COM_FLAG|CPIA_FLAG), 0, 0);
-		}
-	}
-
-	/* Check the camera status again */
-	if (cam->params.status.fatalError) {
-		if (cam->params.status.fatalError)
-			return -EIO;
-	}
-
-	/* VPVersion can't be retrieved before the camera is in HiPower,
-	 * so get it here instead of in get_version_information. */
-	do_command(cam, CPIA_COMMAND_GetVPVersion, 0, 0, 0, 0);
-
-	/* set camera to a known state */
-	return set_camera_state(cam);
-}
-
-static void put_cam(struct cpia_camera_ops* ops)
-{
-	module_put(ops->owner);
-}
-
-/* ------------------------- V4L interface --------------------- */
-static int cpia_open(struct file *file)
-{
-	struct video_device *dev = video_devdata(file);
-	struct cam_data *cam = video_get_drvdata(dev);
-	int err;
-
-	if (!cam) {
-		DBG("Internal error, cam_data not found!\n");
-		return -ENODEV;
-	}
-
-	if (cam->open_count > 0) {
-		DBG("Camera already open\n");
-		return -EBUSY;
-	}
-
-	if (!try_module_get(cam->ops->owner))
-		return -ENODEV;
-
-	mutex_lock(&cam->busy_lock);
-	err = -ENOMEM;
-	if (!cam->raw_image) {
-		cam->raw_image = rvmalloc(CPIA_MAX_IMAGE_SIZE);
-		if (!cam->raw_image)
-			goto oops;
-	}
-
-	if (!cam->decompressed_frame.data) {
-		cam->decompressed_frame.data = rvmalloc(CPIA_MAX_FRAME_SIZE);
-		if (!cam->decompressed_frame.data)
-			goto oops;
-	}
-
-	/* open cpia */
-	err = -ENODEV;
-	if (cam->ops->open(cam->lowlevel_data))
-		goto oops;
-
-	/* reset the camera */
-	if ((err = reset_camera(cam)) != 0) {
-		cam->ops->close(cam->lowlevel_data);
-		goto oops;
-	}
-
-	err = -EINTR;
-	if(signal_pending(current))
-		goto oops;
-
-	/* Set ownership of /proc/cpia/videoX to current user */
-	if(cam->proc_entry)
-		cam->proc_entry->uid = current_uid();
-
-	/* set mark for loading first frame uncompressed */
-	cam->first_frame = 1;
-
-	/* init it to something */
-	cam->mmap_kludge = 0;
-
-	++cam->open_count;
-	file->private_data = dev;
-	mutex_unlock(&cam->busy_lock);
-	return 0;
-
- oops:
-	if (cam->decompressed_frame.data) {
-		rvfree(cam->decompressed_frame.data, CPIA_MAX_FRAME_SIZE);
-		cam->decompressed_frame.data = NULL;
-	}
-	if (cam->raw_image) {
-		rvfree(cam->raw_image, CPIA_MAX_IMAGE_SIZE);
-		cam->raw_image = NULL;
-	}
-	mutex_unlock(&cam->busy_lock);
-	put_cam(cam->ops);
-	return err;
-}
-
-static int cpia_close(struct file *file)
-{
-	struct  video_device *dev = file->private_data;
-	struct cam_data *cam = video_get_drvdata(dev);
-
-	if (cam->ops) {
-		/* Return ownership of /proc/cpia/videoX to root */
-		if(cam->proc_entry)
-			cam->proc_entry->uid = 0;
-
-		/* save camera state for later open (developers guide ch 3.5.3) */
-		save_camera_state(cam);
-
-		/* GotoLoPower */
-		goto_low_power(cam);
-
-		/* Update the camera status */
-		do_command(cam, CPIA_COMMAND_GetCameraStatus, 0, 0, 0, 0);
-
-		/* cleanup internal state stuff */
-		free_frames(cam->frame);
-
-		/* close cpia */
-		cam->ops->close(cam->lowlevel_data);
-
-		put_cam(cam->ops);
-	}
-
-	if (--cam->open_count == 0) {
-		/* clean up capture-buffers */
-		if (cam->raw_image) {
-			rvfree(cam->raw_image, CPIA_MAX_IMAGE_SIZE);
-			cam->raw_image = NULL;
-		}
-
-		if (cam->decompressed_frame.data) {
-			rvfree(cam->decompressed_frame.data, CPIA_MAX_FRAME_SIZE);
-			cam->decompressed_frame.data = NULL;
-		}
-
-		if (cam->frame_buf)
-			free_frame_buf(cam);
-
-		if (!cam->ops)
-			kfree(cam);
-	}
-	file->private_data = NULL;
-
-	return 0;
-}
-
-static ssize_t cpia_read(struct file *file, char __user *buf,
-			 size_t count, loff_t *ppos)
-{
-	struct video_device *dev = file->private_data;
-	struct cam_data *cam = video_get_drvdata(dev);
-	int err;
-
-	/* make this _really_ smp and multithread-safe */
-	if (mutex_lock_interruptible(&cam->busy_lock))
-		return -EINTR;
-
-	if (!buf) {
-		DBG("buf NULL\n");
-		mutex_unlock(&cam->busy_lock);
-		return -EINVAL;
-	}
-
-	if (!count) {
-		DBG("count 0\n");
-		mutex_unlock(&cam->busy_lock);
-		return 0;
-	}
-
-	if (!cam->ops) {
-		DBG("ops NULL\n");
-		mutex_unlock(&cam->busy_lock);
-		return -ENODEV;
-	}
-
-	/* upload frame */
-	cam->decompressed_frame.state = FRAME_READY;
-	cam->mmap_kludge=0;
-	if((err = fetch_frame(cam)) != 0) {
-		DBG("ERROR from fetch_frame: %d\n", err);
-		mutex_unlock(&cam->busy_lock);
-		return err;
-	}
-	cam->decompressed_frame.state = FRAME_UNUSED;
-
-	/* copy data to user space */
-	if (cam->decompressed_frame.count > count) {
-		DBG("count wrong: %d, %lu\n", cam->decompressed_frame.count,
-		    (unsigned long) count);
-		mutex_unlock(&cam->busy_lock);
-		return -EFAULT;
-	}
-	if (copy_to_user(buf, cam->decompressed_frame.data,
-			cam->decompressed_frame.count)) {
-		DBG("copy_to_user failed\n");
-		mutex_unlock(&cam->busy_lock);
-		return -EFAULT;
-	}
-
-	mutex_unlock(&cam->busy_lock);
-	return cam->decompressed_frame.count;
-}
-
-static long cpia_do_ioctl(struct file *file, unsigned int cmd, void *arg)
-{
-	struct video_device *dev = file->private_data;
-	struct cam_data *cam = video_get_drvdata(dev);
-	int retval = 0;
-
-	if (!cam || !cam->ops)
-		return -ENODEV;
-
-	/* make this _really_ smp-safe */
-	if (mutex_lock_interruptible(&cam->busy_lock))
-		return -EINTR;
-
-	/* DBG("cpia_ioctl: %u\n", cmd); */
-
-	switch (cmd) {
-	/* query capabilities */
-	case VIDIOCGCAP:
-	{
-		struct video_capability *b = arg;
-
-		DBG("VIDIOCGCAP\n");
-		strcpy(b->name, "CPiA Camera");
-		b->type = VID_TYPE_CAPTURE | VID_TYPE_SUBCAPTURE;
-		b->channels = 1;
-		b->audios = 0;
-		b->maxwidth = 352;	/* VIDEOSIZE_CIF */
-		b->maxheight = 288;
-		b->minwidth = 48;	/* VIDEOSIZE_48_48 */
-		b->minheight = 48;
-		break;
-	}
-
-	/* get/set video source - we are a camera and nothing else */
-	case VIDIOCGCHAN:
-	{
-		struct video_channel *v = arg;
-
-		DBG("VIDIOCGCHAN\n");
-		if (v->channel != 0) {
-			retval = -EINVAL;
-			break;
-		}
-
-		v->channel = 0;
-		strcpy(v->name, "Camera");
-		v->tuners = 0;
-		v->flags = 0;
-		v->type = VIDEO_TYPE_CAMERA;
-		v->norm = 0;
-		break;
-	}
-
-	case VIDIOCSCHAN:
-	{
-		struct video_channel *v = arg;
-
-		DBG("VIDIOCSCHAN\n");
-		if (v->channel != 0)
-			retval = -EINVAL;
-		break;
-	}
-
-	/* image properties */
-	case VIDIOCGPICT:
-	{
-		struct video_picture *pic = arg;
-		DBG("VIDIOCGPICT\n");
-		*pic = cam->vp;
-		break;
-	}
-
-	case VIDIOCSPICT:
-	{
-		struct video_picture *vp = arg;
-
-		DBG("VIDIOCSPICT\n");
-
-		/* check validity */
-		DBG("palette: %d\n", vp->palette);
-		DBG("depth: %d\n", vp->depth);
-		if (!valid_mode(vp->palette, vp->depth)) {
-			retval = -EINVAL;
-			break;
-		}
-
-		mutex_lock(&cam->param_lock);
-		/* brightness, colour, contrast need no check 0-65535 */
-		cam->vp = *vp;
-		/* update cam->params.colourParams */
-		cam->params.colourParams.brightness = vp->brightness*100/65535;
-		cam->params.colourParams.contrast = vp->contrast*100/65535;
-		cam->params.colourParams.saturation = vp->colour*100/65535;
-		/* contrast is in steps of 8, so round */
-		cam->params.colourParams.contrast =
-			((cam->params.colourParams.contrast + 3) / 8) * 8;
-		if (cam->params.version.firmwareVersion == 1 &&
-		    cam->params.version.firmwareRevision == 2 &&
-		    cam->params.colourParams.contrast > 80) {
-			/* 1-02 firmware limits contrast to 80 */
-			cam->params.colourParams.contrast = 80;
-		}
-
-		/* Adjust flicker control if necessary */
-		if(cam->params.flickerControl.allowableOverExposure < 0)
-			cam->params.flickerControl.allowableOverExposure =
-				-find_over_exposure(cam->params.colourParams.brightness);
-		if(cam->params.flickerControl.flickerMode != 0)
-			cam->cmd_queue |= COMMAND_SETFLICKERCTRL;
-
-
-		/* queue command to update camera */
-		cam->cmd_queue |= COMMAND_SETCOLOURPARAMS;
-		mutex_unlock(&cam->param_lock);
-		DBG("VIDIOCSPICT: %d / %d // %d / %d / %d / %d\n",
-		    vp->depth, vp->palette, vp->brightness, vp->hue, vp->colour,
-		    vp->contrast);
-		break;
-	}
-
-	/* get/set capture window */
-	case VIDIOCGWIN:
-	{
-		struct video_window *vw = arg;
-		DBG("VIDIOCGWIN\n");
-
-		*vw = cam->vw;
-		break;
-	}
-
-	case VIDIOCSWIN:
-	{
-		/* copy_from_user, check validity, copy to internal structure */
-		struct video_window *vw = arg;
-		DBG("VIDIOCSWIN\n");
-
-		if (vw->clipcount != 0) {    /* clipping not supported */
-			retval = -EINVAL;
-			break;
-		}
-		if (vw->clips != NULL) {     /* clipping not supported */
-			retval = -EINVAL;
-			break;
-		}
-
-		/* we set the video window to something smaller or equal to what
-		* is requested by the user???
-		*/
-		mutex_lock(&cam->param_lock);
-		if (vw->width != cam->vw.width || vw->height != cam->vw.height) {
-			int video_size = match_videosize(vw->width, vw->height);
-
-			if (video_size < 0) {
-				retval = -EINVAL;
-				mutex_unlock(&cam->param_lock);
-				break;
-			}
-			cam->video_size = video_size;
-
-			/* video size is changing, reset the subcapture area */
-			memset(&cam->vc, 0, sizeof(cam->vc));
-
-			set_vw_size(cam);
-			DBG("%d / %d\n", cam->vw.width, cam->vw.height);
-			cam->cmd_queue |= COMMAND_SETFORMAT;
-		}
-
-		mutex_unlock(&cam->param_lock);
-
-		/* setformat ignored by camera during streaming,
-		 * so stop/dispatch/start */
-		if (cam->cmd_queue & COMMAND_SETFORMAT) {
-			DBG("\n");
-			dispatch_commands(cam);
-		}
-		DBG("%d/%d:%d\n", cam->video_size,
-		    cam->vw.width, cam->vw.height);
-		break;
-	}
-
-	/* mmap interface */
-	case VIDIOCGMBUF:
-	{
-		struct video_mbuf *vm = arg;
-		int i;
-
-		DBG("VIDIOCGMBUF\n");
-		memset(vm, 0, sizeof(*vm));
-		vm->size = CPIA_MAX_FRAME_SIZE*FRAME_NUM;
-		vm->frames = FRAME_NUM;
-		for (i = 0; i < FRAME_NUM; i++)
-			vm->offsets[i] = CPIA_MAX_FRAME_SIZE * i;
-		break;
-	}
-
-	case VIDIOCMCAPTURE:
-	{
-		struct video_mmap *vm = arg;
-		int video_size;
-
-		DBG("VIDIOCMCAPTURE: %d / %d / %dx%d\n", vm->format, vm->frame,
-		    vm->width, vm->height);
-		if (vm->frame<0||vm->frame>=FRAME_NUM) {
-			retval = -EINVAL;
-			break;
-		}
-
-		/* set video format */
-		cam->vp.palette = vm->format;
-		switch(vm->format) {
-		case VIDEO_PALETTE_GREY:
-			cam->vp.depth=8;
-			break;
-		case VIDEO_PALETTE_RGB555:
-		case VIDEO_PALETTE_RGB565:
-		case VIDEO_PALETTE_YUV422:
-		case VIDEO_PALETTE_YUYV:
-		case VIDEO_PALETTE_UYVY:
-			cam->vp.depth = 16;
-			break;
-		case VIDEO_PALETTE_RGB24:
-			cam->vp.depth = 24;
-			break;
-		case VIDEO_PALETTE_RGB32:
-			cam->vp.depth = 32;
-			break;
-		default:
-			retval = -EINVAL;
-			break;
-		}
-		if (retval)
-			break;
-
-		/* set video size */
-		video_size = match_videosize(vm->width, vm->height);
-		if (video_size < 0) {
-			retval = -EINVAL;
-			break;
-		}
-		if (video_size != cam->video_size) {
-			cam->video_size = video_size;
-
-			/* video size is changing, reset the subcapture area */
-			memset(&cam->vc, 0, sizeof(cam->vc));
-
-			set_vw_size(cam);
-			cam->cmd_queue |= COMMAND_SETFORMAT;
-			dispatch_commands(cam);
-		}
-		/* according to v4l-spec we must start streaming here */
-		cam->mmap_kludge = 1;
-		retval = capture_frame(cam, vm);
-
-		break;
-	}
-
-	case VIDIOCSYNC:
-	{
-		int *frame = arg;
-
-		//DBG("VIDIOCSYNC: %d\n", *frame);
-
-		if (*frame<0 || *frame >= FRAME_NUM) {
-			retval = -EINVAL;
-			break;
-		}
-
-		switch (cam->frame[*frame].state) {
-		case FRAME_UNUSED:
-		case FRAME_READY:
-		case FRAME_GRABBING:
-			DBG("sync to unused frame %d\n", *frame);
-			retval = -EINVAL;
-			break;
-
-		case FRAME_DONE:
-			cam->frame[*frame].state = FRAME_UNUSED;
-			//DBG("VIDIOCSYNC: %d synced\n", *frame);
-			break;
-		}
-		if (retval == -EINTR) {
-			/* FIXME - xawtv does not handle this nice */
-			retval = 0;
-		}
-		break;
-	}
-
-	case VIDIOCGCAPTURE:
-	{
-		struct video_capture *vc = arg;
-
-		DBG("VIDIOCGCAPTURE\n");
-
-		*vc = cam->vc;
-
-		break;
-	}
-
-	case VIDIOCSCAPTURE:
-	{
-		struct video_capture *vc = arg;
-
-		DBG("VIDIOCSCAPTURE\n");
-
-		if (vc->decimation != 0) {    /* How should this be used? */
-			retval = -EINVAL;
-			break;
-		}
-		if (vc->flags != 0) {     /* Even/odd grab not supported */
-			retval = -EINVAL;
-			break;
-		}
-
-		/* Clip to the resolution we can set for the ROI
-		   (every 8 columns and 4 rows) */
-		vc->x      = vc->x      & ~(__u32)7;
-		vc->y      = vc->y      & ~(__u32)3;
-		vc->width  = vc->width  & ~(__u32)7;
-		vc->height = vc->height & ~(__u32)3;
-
-		if(vc->width == 0 || vc->height == 0 ||
-		   vc->x + vc->width  > cam->vw.width ||
-		   vc->y + vc->height > cam->vw.height) {
-			retval = -EINVAL;
-			break;
-		}
-
-		DBG("%d,%d/%dx%d\n", vc->x,vc->y,vc->width, vc->height);
-
-		mutex_lock(&cam->param_lock);
-
-		cam->vc.x      = vc->x;
-		cam->vc.y      = vc->y;
-		cam->vc.width  = vc->width;
-		cam->vc.height = vc->height;
-
-		set_vw_size(cam);
-		cam->cmd_queue |= COMMAND_SETFORMAT;
-
-		mutex_unlock(&cam->param_lock);
-
-		/* setformat ignored by camera during streaming,
-		 * so stop/dispatch/start */
-		dispatch_commands(cam);
-		break;
-	}
-
-	case VIDIOCGUNIT:
-	{
-		struct video_unit *vu = arg;
-
-		DBG("VIDIOCGUNIT\n");
-
-		vu->video    = cam->vdev.minor;
-		vu->vbi      = VIDEO_NO_UNIT;
-		vu->radio    = VIDEO_NO_UNIT;
-		vu->audio    = VIDEO_NO_UNIT;
-		vu->teletext = VIDEO_NO_UNIT;
-
-		break;
-	}
-
-
-	/* pointless to implement overlay with this camera */
-	case VIDIOCCAPTURE:
-	case VIDIOCGFBUF:
-	case VIDIOCSFBUF:
-	case VIDIOCKEY:
-	/* tuner interface - we have none */
-	case VIDIOCGTUNER:
-	case VIDIOCSTUNER:
-	case VIDIOCGFREQ:
-	case VIDIOCSFREQ:
-	/* audio interface - we have none */
-	case VIDIOCGAUDIO:
-	case VIDIOCSAUDIO:
-		retval = -EINVAL;
-		break;
-	default:
-		retval = -ENOIOCTLCMD;
-		break;
-	}
-
-	mutex_unlock(&cam->busy_lock);
-	return retval;
-}
-
-static long cpia_ioctl(struct file *file,
-		     unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(file, cmd, arg, cpia_do_ioctl);
-}
-
-
-/* FIXME */
-static int cpia_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct video_device *dev = file->private_data;
-	unsigned long start = vma->vm_start;
-	unsigned long size  = vma->vm_end - vma->vm_start;
-	unsigned long page, pos;
-	struct cam_data *cam = video_get_drvdata(dev);
-	int retval;
-
-	if (!cam || !cam->ops)
-		return -ENODEV;
-
-	DBG("cpia_mmap: %ld\n", size);
-
-	if (size > FRAME_NUM*CPIA_MAX_FRAME_SIZE)
-		return -EINVAL;
-
-	/* make this _really_ smp-safe */
-	if (mutex_lock_interruptible(&cam->busy_lock))
-		return -EINTR;
-
-	if (!cam->frame_buf) {	/* we do lazy allocation */
-		if ((retval = allocate_frame_buf(cam))) {
-			mutex_unlock(&cam->busy_lock);
-			return retval;
-		}
-	}
-
-	pos = (unsigned long)(cam->frame_buf);
-	while (size > 0) {
-		page = vmalloc_to_pfn((void *)pos);
-		if (remap_pfn_range(vma, start, page, PAGE_SIZE, PAGE_SHARED)) {
-			mutex_unlock(&cam->busy_lock);
-			return -EAGAIN;
-		}
-		start += PAGE_SIZE;
-		pos += PAGE_SIZE;
-		if (size > PAGE_SIZE)
-			size -= PAGE_SIZE;
-		else
-			size = 0;
-	}
-
-	DBG("cpia_mmap: %ld\n", size);
-	mutex_unlock(&cam->busy_lock);
-
-	return 0;
-}
-
-static const struct v4l2_file_operations cpia_fops = {
-	.owner		= THIS_MODULE,
-	.open		= cpia_open,
-	.release       	= cpia_close,
-	.read		= cpia_read,
-	.mmap		= cpia_mmap,
-	.ioctl          = cpia_ioctl,
-};
-
-static struct video_device cpia_template = {
-	.name		= "CPiA Camera",
-	.fops           = &cpia_fops,
-	.release 	= video_device_release_empty,
-};
-
-/* initialise cam_data structure  */
-static void reset_camera_struct(struct cam_data *cam)
-{
-	/* The following parameter values are the defaults from
-	 * "Software Developer's Guide for CPiA Cameras".  Any changes
-	 * to the defaults are noted in comments. */
-	cam->params.colourParams.brightness = 50;
-	cam->params.colourParams.contrast = 48;
-	cam->params.colourParams.saturation = 50;
-	cam->params.exposure.gainMode = 4;
-	cam->params.exposure.expMode = 2;		/* AEC */
-	cam->params.exposure.compMode = 1;
-	cam->params.exposure.centreWeight = 1;
-	cam->params.exposure.gain = 0;
-	cam->params.exposure.fineExp = 0;
-	cam->params.exposure.coarseExpLo = 185;
-	cam->params.exposure.coarseExpHi = 0;
-	cam->params.exposure.redComp = COMP_RED;
-	cam->params.exposure.green1Comp = COMP_GREEN1;
-	cam->params.exposure.green2Comp = COMP_GREEN2;
-	cam->params.exposure.blueComp = COMP_BLUE;
-	cam->params.colourBalance.balanceMode = 2;	/* ACB */
-	cam->params.colourBalance.redGain = 32;
-	cam->params.colourBalance.greenGain = 6;
-	cam->params.colourBalance.blueGain = 92;
-	cam->params.apcor.gain1 = 0x18;
-	cam->params.apcor.gain2 = 0x16;
-	cam->params.apcor.gain4 = 0x24;
-	cam->params.apcor.gain8 = 0x34;
-	cam->params.flickerControl.flickerMode = 0;
-	cam->params.flickerControl.disabled = 1;
-
-	cam->params.flickerControl.coarseJump =
-		flicker_jumps[cam->mainsFreq]
-			     [cam->params.sensorFps.baserate]
-			     [cam->params.sensorFps.divisor];
-	cam->params.flickerControl.allowableOverExposure =
-		-find_over_exposure(cam->params.colourParams.brightness);
-	cam->params.vlOffset.gain1 = 20;
-	cam->params.vlOffset.gain2 = 24;
-	cam->params.vlOffset.gain4 = 26;
-	cam->params.vlOffset.gain8 = 26;
-	cam->params.compressionParams.hysteresis = 3;
-	cam->params.compressionParams.threshMax = 11;
-	cam->params.compressionParams.smallStep = 1;
-	cam->params.compressionParams.largeStep = 3;
-	cam->params.compressionParams.decimationHysteresis = 2;
-	cam->params.compressionParams.frDiffStepThresh = 5;
-	cam->params.compressionParams.qDiffStepThresh = 3;
-	cam->params.compressionParams.decimationThreshMod = 2;
-	/* End of default values from Software Developer's Guide */
-
-	cam->transfer_rate = 0;
-	cam->exposure_status = EXPOSURE_NORMAL;
-
-	/* Set Sensor FPS to 15fps. This seems better than 30fps
-	 * for indoor lighting. */
-	cam->params.sensorFps.divisor = 1;
-	cam->params.sensorFps.baserate = 1;
-
-	cam->params.yuvThreshold.yThreshold = 6; /* From windows driver */
-	cam->params.yuvThreshold.uvThreshold = 6; /* From windows driver */
-
-	cam->params.format.subSample = SUBSAMPLE_422;
-	cam->params.format.yuvOrder = YUVORDER_YUYV;
-
-	cam->params.compression.mode = CPIA_COMPRESSION_AUTO;
-	cam->params.compressionTarget.frTargeting =
-		CPIA_COMPRESSION_TARGET_QUALITY;
-	cam->params.compressionTarget.targetFR = 15; /* From windows driver */
-	cam->params.compressionTarget.targetQ = 5; /* From windows driver */
-
-	cam->params.qx3.qx3_detected = 0;
-	cam->params.qx3.toplight = 0;
-	cam->params.qx3.bottomlight = 0;
-	cam->params.qx3.button = 0;
-	cam->params.qx3.cradled = 0;
-
-	cam->video_size = VIDEOSIZE_CIF;
-
-	cam->vp.colour = 32768;      /* 50% */
-	cam->vp.hue = 32768;         /* 50% */
-	cam->vp.brightness = 32768;  /* 50% */
-	cam->vp.contrast = 32768;    /* 50% */
-	cam->vp.whiteness = 0;       /* not used -> grayscale only */
-	cam->vp.depth = 24;          /* to be set by user */
-	cam->vp.palette = VIDEO_PALETTE_RGB24; /* to be set by user */
-
-	cam->vc.x = 0;
-	cam->vc.y = 0;
-	cam->vc.width = 0;
-	cam->vc.height = 0;
-
-	cam->vw.x = 0;
-	cam->vw.y = 0;
-	set_vw_size(cam);
-	cam->vw.chromakey = 0;
-	cam->vw.flags = 0;
-	cam->vw.clipcount = 0;
-	cam->vw.clips = NULL;
-
-	cam->cmd_queue = COMMAND_NONE;
-	cam->first_frame = 1;
-
-	return;
-}
-
-/* initialize cam_data structure  */
-static void init_camera_struct(struct cam_data *cam,
-			       struct cpia_camera_ops *ops )
-{
-	int i;
-
-	/* Default everything to 0 */
-	memset(cam, 0, sizeof(struct cam_data));
-
-	cam->ops = ops;
-	mutex_init(&cam->param_lock);
-	mutex_init(&cam->busy_lock);
-
-	reset_camera_struct(cam);
-
-	cam->proc_entry = NULL;
-
-	memcpy(&cam->vdev, &cpia_template, sizeof(cpia_template));
-	video_set_drvdata(&cam->vdev, cam);
-
-	cam->curframe = 0;
-	for (i = 0; i < FRAME_NUM; i++) {
-		cam->frame[i].width = 0;
-		cam->frame[i].height = 0;
-		cam->frame[i].state = FRAME_UNUSED;
-		cam->frame[i].data = NULL;
-	}
-	cam->decompressed_frame.width = 0;
-	cam->decompressed_frame.height = 0;
-	cam->decompressed_frame.state = FRAME_UNUSED;
-	cam->decompressed_frame.data = NULL;
-}
-
-struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowlevel)
-{
-	struct cam_data *camera;
-
-	if ((camera = kmalloc(sizeof(struct cam_data), GFP_KERNEL)) == NULL)
-		return NULL;
-
-
-	init_camera_struct( camera, ops );
-	camera->lowlevel_data = lowlevel;
-
-	/* register v4l device */
-	if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
-		kfree(camera);
-		printk(KERN_DEBUG "video_register_device failed\n");
-		return NULL;
-	}
-
-	/* get version information from camera: open/reset/close */
-
-	/* open cpia */
-	if (camera->ops->open(camera->lowlevel_data))
-		return camera;
-
-	/* reset the camera */
-	if (reset_camera(camera) != 0) {
-		camera->ops->close(camera->lowlevel_data);
-		return camera;
-	}
-
-	/* close cpia */
-	camera->ops->close(camera->lowlevel_data);
-
-#ifdef CONFIG_PROC_FS
-	create_proc_cpia_cam(camera);
-#endif
-
-	printk(KERN_INFO "  CPiA Version: %d.%02d (%d.%d)\n",
-	       camera->params.version.firmwareVersion,
-	       camera->params.version.firmwareRevision,
-	       camera->params.version.vcVersion,
-	       camera->params.version.vcRevision);
-	printk(KERN_INFO "  CPiA PnP-ID: %04x:%04x:%04x\n",
-	       camera->params.pnpID.vendor,
-	       camera->params.pnpID.product,
-	       camera->params.pnpID.deviceRevision);
-	printk(KERN_INFO "  VP-Version: %d.%d %04x\n",
-	       camera->params.vpVersion.vpVersion,
-	       camera->params.vpVersion.vpRevision,
-	       camera->params.vpVersion.cameraHeadID);
-
-	return camera;
-}
-
-void cpia_unregister_camera(struct cam_data *cam)
-{
-	DBG("unregistering video\n");
-	video_unregister_device(&cam->vdev);
-	if (cam->open_count) {
-		put_cam(cam->ops);
-		DBG("camera open -- setting ops to NULL\n");
-		cam->ops = NULL;
-	}
-
-#ifdef CONFIG_PROC_FS
-	DBG("destroying /proc/cpia/%s\n", video_device_node_name(&cam->vdev));
-	destroy_proc_cpia_cam(cam);
-#endif
-	if (!cam->open_count) {
-		DBG("freeing camera\n");
-		kfree(cam);
-	}
-}
-
-static int __init cpia_init(void)
-{
-	printk(KERN_INFO "%s v%d.%d.%d\n", ABOUT,
-	       CPIA_MAJ_VER, CPIA_MIN_VER, CPIA_PATCH_VER);
-
-	printk(KERN_WARNING "Since in-kernel colorspace conversion is not "
-	       "allowed, it is disabled by default now. Users should fix the "
-	       "applications in case they don't work without conversion "
-	       "reenabled by setting the 'colorspace_conv' module "
-	       "parameter to 1\n");
-
-#ifdef CONFIG_PROC_FS
-	proc_cpia_create();
-#endif
-
-	return 0;
-}
-
-static void __exit cpia_exit(void)
-{
-#ifdef CONFIG_PROC_FS
-	proc_cpia_destroy();
-#endif
-}
-
-module_init(cpia_init);
-module_exit(cpia_exit);
-
-/* Exported symbols for modules. */
-
-EXPORT_SYMBOL(cpia_register_camera);
-EXPORT_SYMBOL(cpia_unregister_camera);
diff --git a/drivers/staging/cpia/cpia.h b/drivers/staging/cpia/cpia.h
deleted file mode 100644
index 8f0cfee4b8a..00000000000
--- a/drivers/staging/cpia/cpia.h
+++ /dev/null
@@ -1,432 +0,0 @@
-#ifndef cpia_h
-#define cpia_h
-
-/*
- * CPiA Parallel Port Video4Linux driver
- *
- * Supports CPiA based parallel port Video Camera's.
- *
- * (C) Copyright 1999 Bas Huisman,
- *                    Peter Pregler,
- *                    Scott J. Bertin,
- *                    VLSI Vision Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#define CPIA_MAJ_VER	1
-#define CPIA_MIN_VER   2
-#define CPIA_PATCH_VER	3
-
-#define CPIA_PP_MAJ_VER       CPIA_MAJ_VER
-#define CPIA_PP_MIN_VER       CPIA_MIN_VER
-#define CPIA_PP_PATCH_VER     CPIA_PATCH_VER
-
-#define CPIA_USB_MAJ_VER      CPIA_MAJ_VER
-#define CPIA_USB_MIN_VER      CPIA_MIN_VER
-#define CPIA_USB_PATCH_VER    CPIA_PATCH_VER
-
-#define CPIA_MAX_FRAME_SIZE_UNALIGNED	(352 * 288 * 4)   /* CIF at RGB32 */
-#define CPIA_MAX_FRAME_SIZE	((CPIA_MAX_FRAME_SIZE_UNALIGNED + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)) /* align above to PAGE_SIZE */
-
-#ifdef __KERNEL__
-
-#include <asm/uaccess.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <linux/list.h>
-#include <linux/mutex.h>
-
-struct cpia_camera_ops
-{
-	/* open sets privdata to point to structure for this camera.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*open)(void *privdata);
-
-	/* Registers callback function cb to be called with cbdata
-	 * when an image is ready.  If cb is NULL, only single image grabs
-	 * should be used.  cb should immediately call streamRead to read
-	 * the data or data may be lost. Returns negative value on error,
-	 * otherwise 0.
-	 */
-	int (*registerCallback)(void *privdata, void (*cb)(void *cbdata),
-				void *cbdata);
-
-	/* transferCmd sends commands to the camera.  command MUST point to
-	 * an  8 byte buffer in kernel space. data can be NULL if no extra
-	 * data is needed.  The size of the data is given by the last 2
-	 * bytes of command.  data must also point to memory in kernel space.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*transferCmd)(void *privdata, u8 *command, u8 *data);
-
-	/* streamStart initiates stream capture mode.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*streamStart)(void *privdata);
-
-	/* streamStop terminates stream capture mode.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*streamStop)(void *privdata);
-
-	/* streamRead reads a frame from the camera.  buffer points to a
-	 * buffer large enough to hold a complete frame in kernel space.
-	 * noblock indicates if this should be a non blocking read.
-	 * Returns the number of bytes read, or negative value on error.
-	 */
-	int (*streamRead)(void *privdata, u8 *buffer, int noblock);
-
-	/* close disables the device until open() is called again.
-	 * Returns negative value on error, otherwise 0.
-	 */
-	int (*close)(void *privdata);
-
-	/* If wait_for_stream_ready is non-zero, wait until the streamState
-	 * is STREAM_READY before calling streamRead.
-	 */
-	int wait_for_stream_ready;
-
-	/*
-	 * Used to maintain lowlevel module usage counts
-	 */
-	struct module *owner;
-};
-
-struct cpia_frame {
-	u8 *data;
-	int count;
-	int width;
-	int height;
-	volatile int state;
-};
-
-struct cam_params {
-	struct {
-		u8 firmwareVersion;
-		u8 firmwareRevision;
-		u8 vcVersion;
-		u8 vcRevision;
-	} version;
-	struct {
-		u16 vendor;
-		u16 product;
-		u16 deviceRevision;
-	} pnpID;
-	struct {
-		u8 vpVersion;
-		u8 vpRevision;
-		u16 cameraHeadID;
-	} vpVersion;
-	struct {
-		u8 systemState;
-		u8 grabState;
-		u8 streamState;
-		u8 fatalError;
-		u8 cmdError;
-		u8 debugFlags;
-		u8 vpStatus;
-		u8 errorCode;
-	} status;
-	struct {
-		u8 brightness;
-		u8 contrast;
-		u8 saturation;
-	} colourParams;
-	struct {
-		u8 gainMode;
-		u8 expMode;
-		u8 compMode;
-		u8 centreWeight;
-		u8 gain;
-		u8 fineExp;
-		u8 coarseExpLo;
-		u8 coarseExpHi;
-		u8 redComp;
-		u8 green1Comp;
-		u8 green2Comp;
-		u8 blueComp;
-	} exposure;
-	struct {
-		u8 balanceMode;
-		u8 redGain;
-		u8 greenGain;
-		u8 blueGain;
-	} colourBalance;
-	struct {
-		u8 divisor;
-		u8 baserate;
-	} sensorFps;
-	struct {
-		u8 gain1;
-		u8 gain2;
-		u8 gain4;
-		u8 gain8;
-	} apcor;
-	struct {
-		u8 disabled;
-		u8 flickerMode;
-		u8 coarseJump;
-		int allowableOverExposure;
-	} flickerControl;
-	struct {
-		u8 gain1;
-		u8 gain2;
-		u8 gain4;
-		u8 gain8;
-	} vlOffset;
-	struct {
-		u8 mode;
-		u8 decimation;
-	} compression;
-	struct {
-		u8 frTargeting;
-		u8 targetFR;
-		u8 targetQ;
-	} compressionTarget;
-	struct {
-		u8 yThreshold;
-		u8 uvThreshold;
-	} yuvThreshold;
-	struct {
-		u8 hysteresis;
-		u8 threshMax;
-		u8 smallStep;
-		u8 largeStep;
-		u8 decimationHysteresis;
-		u8 frDiffStepThresh;
-		u8 qDiffStepThresh;
-		u8 decimationThreshMod;
-	} compressionParams;
-	struct {
-		u8 videoSize;		/* CIF/QCIF */
-		u8 subSample;
-		u8 yuvOrder;
-	} format;
-	struct {                        /* Intel QX3 specific data */
-		u8 qx3_detected;        /* a QX3 is present */
-		u8 toplight;            /* top light lit , R/W */
-		u8 bottomlight;         /* bottom light lit, R/W */
-		u8 button;              /* snapshot button pressed (R/O) */
-		u8 cradled;             /* microscope is in cradle (R/O) */
-	} qx3;
-	struct {
-		u8 colStart;		/* skip first 8*colStart pixels */
-		u8 colEnd;		/* finish at 8*colEnd pixels */
-		u8 rowStart;		/* skip first 4*rowStart lines */
-		u8 rowEnd;		/* finish at 4*rowEnd lines */
-	} roi;
-	u8 ecpTiming;
-	u8 streamStartLine;
-};
-
-enum v4l_camstates {
-	CPIA_V4L_IDLE = 0,
-	CPIA_V4L_ERROR,
-	CPIA_V4L_COMMAND,
-	CPIA_V4L_GRABBING,
-	CPIA_V4L_STREAMING,
-	CPIA_V4L_STREAMING_PAUSED,
-};
-
-#define FRAME_NUM	2	/* double buffering for now */
-
-struct cam_data {
-	struct list_head cam_data_list;
-
-	struct mutex busy_lock;		/* guard against SMP multithreading */
-	struct cpia_camera_ops *ops;	/* lowlevel driver operations */
-	void *lowlevel_data;		/* private data for lowlevel driver */
-	u8 *raw_image;			/* buffer for raw image data */
-	struct cpia_frame decompressed_frame;
-					/* buffer to hold decompressed frame */
-	int image_size;			/* sizeof last decompressed image */
-	int open_count;			/* # of process that have camera open */
-
-				/* camera status */
-	int fps;			/* actual fps reported by the camera */
-	int transfer_rate;		/* transfer rate from camera in kB/s */
-	u8 mainsFreq;			/* for flicker control */
-
-				/* proc interface */
-	struct mutex param_lock;	/* params lock for this camera */
-	struct cam_params params;	/* camera settings */
-	struct proc_dir_entry *proc_entry;	/* /proc/cpia/videoX */
-
-					/* v4l */
-	int video_size;			/* VIDEO_SIZE_ */
-	volatile enum v4l_camstates camstate;	/* v4l layer status */
-	struct video_device vdev;	/* v4l videodev */
-	struct video_picture vp;	/* v4l camera settings */
-	struct video_window vw;		/* v4l capture area */
-	struct video_capture vc;       	/* v4l subcapture area */
-
-				/* mmap interface */
-	int curframe;			/* the current frame to grab into */
-	u8 *frame_buf;			/* frame buffer data */
-	struct cpia_frame frame[FRAME_NUM];
-				/* FRAME_NUM-buffering, so we need a array */
-
-	int first_frame;
-	int mmap_kludge;		/* 'wrong' byte order for mmap */
-	volatile u32 cmd_queue;		/* queued commands */
-	int exposure_status;		/* EXPOSURE_* */
-	int exposure_count;		/* number of frames at this status */
-};
-
-/* cpia_register_camera is called by low level driver for each camera.
- * A unique camera number is returned, or a negative value on error */
-struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowlevel);
-
-/* cpia_unregister_camera is called by low level driver when a camera
- * is removed.  This must not fail. */
-void cpia_unregister_camera(struct cam_data *cam);
-
-/* raw CIF + 64 byte header + (2 bytes line_length + EOL) per line + 4*EOI +
- * one byte 16bit DMA alignment
- */
-#define CPIA_MAX_IMAGE_SIZE ((352*288*2)+64+(288*3)+5)
-
-/* constant value's */
-#define MAGIC_0		0x19
-#define MAGIC_1		0x68
-#define DATA_IN		0xC0
-#define DATA_OUT	0x40
-#define VIDEOSIZE_QCIF	0	/* 176x144 */
-#define VIDEOSIZE_CIF	1	/* 352x288 */
-#define VIDEOSIZE_SIF	2	/* 320x240 */
-#define VIDEOSIZE_QSIF	3	/* 160x120 */
-#define VIDEOSIZE_48_48		4 /* where no one has gone before, iconsize! */
-#define VIDEOSIZE_64_48		5
-#define VIDEOSIZE_128_96	6
-#define VIDEOSIZE_160_120	VIDEOSIZE_QSIF
-#define VIDEOSIZE_176_144	VIDEOSIZE_QCIF
-#define VIDEOSIZE_192_144	7
-#define VIDEOSIZE_224_168	8
-#define VIDEOSIZE_256_192	9
-#define VIDEOSIZE_288_216	10
-#define VIDEOSIZE_320_240	VIDEOSIZE_SIF
-#define VIDEOSIZE_352_288	VIDEOSIZE_CIF
-#define VIDEOSIZE_88_72		11 /* quarter CIF */
-#define SUBSAMPLE_420	0
-#define SUBSAMPLE_422	1
-#define YUVORDER_YUYV	0
-#define YUVORDER_UYVY	1
-#define NOT_COMPRESSED	0
-#define COMPRESSED	1
-#define NO_DECIMATION	0
-#define DECIMATION_ENAB	1
-#define EOI		0xff	/* End Of Image */
-#define EOL		0xfd	/* End Of Line */
-#define FRAME_HEADER_SIZE	64
-
-/* Image grab modes */
-#define CPIA_GRAB_SINGLE	0
-#define CPIA_GRAB_CONTINUOUS	1
-
-/* Compression parameters */
-#define CPIA_COMPRESSION_NONE	0
-#define CPIA_COMPRESSION_AUTO	1
-#define CPIA_COMPRESSION_MANUAL	2
-#define CPIA_COMPRESSION_TARGET_QUALITY         0
-#define CPIA_COMPRESSION_TARGET_FRAMERATE       1
-
-/* Return offsets for GetCameraState */
-#define SYSTEMSTATE	0
-#define GRABSTATE	1
-#define STREAMSTATE	2
-#define FATALERROR	3
-#define CMDERROR	4
-#define DEBUGFLAGS	5
-#define VPSTATUS	6
-#define ERRORCODE	7
-
-/* SystemState */
-#define UNINITIALISED_STATE	0
-#define PASS_THROUGH_STATE	1
-#define LO_POWER_STATE		2
-#define HI_POWER_STATE		3
-#define WARM_BOOT_STATE		4
-
-/* GrabState */
-#define GRAB_IDLE		0
-#define GRAB_ACTIVE		1
-#define GRAB_DONE		2
-
-/* StreamState */
-#define STREAM_NOT_READY	0
-#define STREAM_READY		1
-#define STREAM_OPEN		2
-#define STREAM_PAUSED		3
-#define STREAM_FINISHED		4
-
-/* Fatal Error, CmdError, and DebugFlags */
-#define CPIA_FLAG	  1
-#define SYSTEM_FLAG	  2
-#define INT_CTRL_FLAG	  4
-#define PROCESS_FLAG	  8
-#define COM_FLAG	 16
-#define VP_CTRL_FLAG	 32
-#define CAPTURE_FLAG	 64
-#define DEBUG_FLAG	128
-
-/* VPStatus */
-#define VP_STATE_OK			0x00
-
-#define VP_STATE_FAILED_VIDEOINIT	0x01
-#define VP_STATE_FAILED_AECACBINIT	0x02
-#define VP_STATE_AEC_MAX		0x04
-#define VP_STATE_ACB_BMAX		0x08
-
-#define VP_STATE_ACB_RMIN		0x10
-#define VP_STATE_ACB_GMIN		0x20
-#define VP_STATE_ACB_RMAX		0x40
-#define VP_STATE_ACB_GMAX		0x80
-
-/* default (minimum) compensation values */
-#define COMP_RED        220
-#define COMP_GREEN1     214
-#define COMP_GREEN2     COMP_GREEN1
-#define COMP_BLUE       230
-
-/* exposure status */
-#define EXPOSURE_VERY_LIGHT 0
-#define EXPOSURE_LIGHT      1
-#define EXPOSURE_NORMAL     2
-#define EXPOSURE_DARK       3
-#define EXPOSURE_VERY_DARK  4
-
-/* ErrorCode */
-#define ERROR_FLICKER_BELOW_MIN_EXP     0x01 /*flicker exposure got below minimum exposure */
-#define ALOG(fmt,args...) printk(fmt, ##args)
-#define LOG(fmt,args...) ALOG(KERN_INFO __FILE__ ":%s(%d):" fmt, __func__ , __LINE__ , ##args)
-
-#ifdef _CPIA_DEBUG_
-#define ADBG(fmt,args...) printk(fmt, jiffies, ##args)
-#define DBG(fmt,args...) ADBG(KERN_DEBUG __FILE__" (%ld):%s(%d):" fmt, __func__, __LINE__ , ##args)
-#else
-#define DBG(fmn,args...) do {} while(0)
-#endif
-
-#define DEB_BYTE(p)\
-  DBG("%1d %1d %1d %1d %1d %1d %1d %1d \n",\
-      (p)&0x80?1:0, (p)&0x40?1:0, (p)&0x20?1:0, (p)&0x10?1:0,\
-	(p)&0x08?1:0, (p)&0x04?1:0, (p)&0x02?1:0, (p)&0x01?1:0);
-
-#endif /* __KERNEL__ */
-
-#endif /* cpia_h */
diff --git a/drivers/staging/cpia/cpia_pp.c b/drivers/staging/cpia/cpia_pp.c
deleted file mode 100644
index f5604c16a09..00000000000
--- a/drivers/staging/cpia/cpia_pp.c
+++ /dev/null
@@ -1,869 +0,0 @@
-/*
- * cpia_pp CPiA Parallel Port driver
- *
- * Supports CPiA based parallel port Video Camera's.
- *
- * (C) Copyright 1999 Bas Huisman <bhuism@cs.utwente.nl>
- * (C) Copyright 1999-2000 Scott J. Bertin <sbertin@securenym.net>,
- * (C) Copyright 1999-2000 Peter Pregler <Peter_Pregler@email.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_  1 */
-
-
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/kernel.h>
-#include <linux/parport.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/workqueue.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-
-#include <linux/kmod.h>
-
-/* #define _CPIA_DEBUG_		define for verbose debug output */
-#include "cpia.h"
-
-static int cpia_pp_open(void *privdata);
-static int cpia_pp_registerCallback(void *privdata, void (*cb) (void *cbdata),
-				    void *cbdata);
-static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data);
-static int cpia_pp_streamStart(void *privdata);
-static int cpia_pp_streamStop(void *privdata);
-static int cpia_pp_streamRead(void *privdata, u8 *buffer, int noblock);
-static int cpia_pp_close(void *privdata);
-
-
-#define ABOUT "Parallel port driver for Vision CPiA based cameras"
-
-#define PACKET_LENGTH  8
-
-/* Magic numbers for defining port-device mappings */
-#define PPCPIA_PARPORT_UNSPEC -4
-#define PPCPIA_PARPORT_AUTO -3
-#define PPCPIA_PARPORT_OFF -2
-#define PPCPIA_PARPORT_NONE -1
-
-static int parport_nr[PARPORT_MAX] = {[0 ... PARPORT_MAX - 1] = PPCPIA_PARPORT_UNSPEC};
-static char *parport[PARPORT_MAX] = {NULL,};
-
-MODULE_AUTHOR("B. Huisman <bhuism@cs.utwente.nl> & Peter Pregler <Peter_Pregler@email.com>");
-MODULE_DESCRIPTION("Parallel port driver for Vision CPiA based cameras");
-MODULE_LICENSE("GPL");
-
-module_param_array(parport, charp, NULL, 0);
-MODULE_PARM_DESC(parport, "'auto' or a list of parallel port numbers. Just like lp.");
-
-struct pp_cam_entry {
-	struct pardevice *pdev;
-	struct parport *port;
-	struct work_struct cb_task;
-	void (*cb_func)(void *cbdata);
-	void *cb_data;
-	int open_count;
-	wait_queue_head_t wq_stream;
-	/* image state flags */
-	int image_ready;	/* we got an interrupt */
-	int image_complete;	/* we have seen 4 EOI */
-
-	int streaming; /* we are in streaming mode */
-	int stream_irq;
-};
-
-static struct cpia_camera_ops cpia_pp_ops =
-{
-	cpia_pp_open,
-	cpia_pp_registerCallback,
-	cpia_pp_transferCmd,
-	cpia_pp_streamStart,
-	cpia_pp_streamStop,
-	cpia_pp_streamRead,
-	cpia_pp_close,
-	1,
-	THIS_MODULE
-};
-
-static LIST_HEAD(cam_list);
-static spinlock_t cam_list_lock_pp;
-
-/* FIXME */
-static void cpia_parport_enable_irq( struct parport *port ) {
-	parport_enable_irq(port);
-	mdelay(10);
-	return;
-}
-
-static void cpia_parport_disable_irq( struct parport *port ) {
-	parport_disable_irq(port);
-	mdelay(10);
-	return;
-}
-
-/* Special CPiA PPC modes: These are invoked by using the 1284 Extensibility
- * Link Flag during negotiation */
-#define UPLOAD_FLAG  0x08
-#define NIBBLE_TRANSFER 0x01
-#define ECP_TRANSFER 0x03
-
-#define PARPORT_CHUNK_SIZE	PAGE_SIZE
-
-
-static void cpia_pp_run_callback(struct work_struct *work)
-{
-	void (*cb_func)(void *cbdata);
-	void *cb_data;
-	struct pp_cam_entry *cam;
-
-	cam = container_of(work, struct pp_cam_entry, cb_task);
-	cb_func = cam->cb_func;
-	cb_data = cam->cb_data;
-
-	cb_func(cb_data);
-}
-
-/****************************************************************************
- *
- *  CPiA-specific  low-level parport functions for nibble uploads
- *
- ***************************************************************************/
-/*  CPiA nonstandard "Nibble" mode (no nDataAvail signal after each byte). */
-/* The standard kernel parport_ieee1284_read_nibble() fails with the CPiA... */
-
-static size_t cpia_read_nibble (struct parport *port,
-			 void *buffer, size_t len,
-			 int flags)
-{
-	/* adapted verbatim, with one change, from
-	   parport_ieee1284_read_nibble() in drivers/parport/ieee1284-ops.c */
-
-	unsigned char *buf = buffer;
-	int i;
-	unsigned char byte = 0;
-
-	len *= 2; /* in nibbles */
-	for (i=0; i < len; i++) {
-		unsigned char nibble;
-
-		/* The CPiA firmware suppresses the use of nDataAvail (nFault LO)
-		 * after every second nibble to signal that more
-		 * data is available.  (the total number of Bytes that
-		 * should be sent is known; if too few are received, an error
-		 * will be recorded after a timeout).
-		 * This is incompatible with parport_ieee1284_read_nibble(),
-		 * which expects to find nFault LO after every second nibble.
-		 */
-
-		/* Solution: modify cpia_read_nibble to only check for
-		 * nDataAvail before the first nibble is sent.
-		 */
-
-		/* Does the error line indicate end of data? */
-		if (((i /*& 1*/) == 0) &&
-		    (parport_read_status(port) & PARPORT_STATUS_ERROR)) {
-			DBG("%s: No more nibble data (%d bytes)\n",
-			    port->name, i/2);
-			goto end_of_data;
-		}
-
-		/* Event 7: Set nAutoFd low. */
-		parport_frob_control (port,
-				      PARPORT_CONTROL_AUTOFD,
-				      PARPORT_CONTROL_AUTOFD);
-
-		/* Event 9: nAck goes low. */
-		port->ieee1284.phase = IEEE1284_PH_REV_DATA;
-		if (parport_wait_peripheral (port,
-					     PARPORT_STATUS_ACK, 0)) {
-			/* Timeout -- no more data? */
-				 DBG("%s: Nibble timeout at event 9 (%d bytes)\n",
-				 port->name, i/2);
-			parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
-			break;
-		}
-
-
-		/* Read a nibble. */
-		nibble = parport_read_status (port) >> 3;
-		nibble &= ~8;
-		if ((nibble & 0x10) == 0)
-			nibble |= 8;
-		nibble &= 0xf;
-
-		/* Event 10: Set nAutoFd high. */
-		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
-
-		/* Event 11: nAck goes high. */
-		if (parport_wait_peripheral (port,
-					     PARPORT_STATUS_ACK,
-					     PARPORT_STATUS_ACK)) {
-			/* Timeout -- no more data? */
-			DBG("%s: Nibble timeout at event 11\n",
-				 port->name);
-			break;
-		}
-
-		if (i & 1) {
-			/* Second nibble */
-			byte |= nibble << 4;
-			*buf++ = byte;
-		} else
-			byte = nibble;
-	}
-
-	if (i == len) {
-		/* Read the last nibble without checking data avail. */
-		if (parport_read_status (port) & PARPORT_STATUS_ERROR) {
-		end_of_data:
-			/* Go to reverse idle phase. */
-			parport_frob_control (port,
-					      PARPORT_CONTROL_AUTOFD,
-					      PARPORT_CONTROL_AUTOFD);
-			port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE;
-		}
-		else
-			port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL;
-	}
-
-	return i/2;
-}
-
-/* CPiA nonstandard "Nibble Stream" mode (2 nibbles per cycle, instead of 1)
- * (See CPiA Data sheet p. 31)
- *
- * "Nibble Stream" mode used by CPiA for uploads to non-ECP ports is a
- * nonstandard variant of nibble mode which allows the same (mediocre)
- * data flow of 8 bits per cycle as software-enabled ECP by TRISTATE-capable
- * parallel ports, but works also for  non-TRISTATE-capable ports.
- * (Standard nibble mode only send 4 bits per cycle)
- *
- */
-
-static size_t cpia_read_nibble_stream(struct parport *port,
-			       void *buffer, size_t len,
-			       int flags)
-{
-	int i;
-	unsigned char *buf = buffer;
-	int endseen = 0;
-
-	for (i=0; i < len; i++) {
-		unsigned char nibble[2], byte = 0;
-		int j;
-
-		/* Image Data is complete when 4 consecutive EOI bytes (0xff) are seen */
-		if (endseen > 3 )
-			break;
-
-		/* Event 7: Set nAutoFd low. */
-		parport_frob_control (port,
-				      PARPORT_CONTROL_AUTOFD,
-				      PARPORT_CONTROL_AUTOFD);
-
-		/* Event 9: nAck goes low. */
-		port->ieee1284.phase = IEEE1284_PH_REV_DATA;
-		if (parport_wait_peripheral (port,
-					     PARPORT_STATUS_ACK, 0)) {
-			/* Timeout -- no more data? */
-				 DBG("%s: Nibble timeout at event 9 (%d bytes)\n",
-				 port->name, i/2);
-			parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
-			break;
-		}
-
-		/* Read lower nibble */
-		nibble[0] = parport_read_status (port) >>3;
-
-		/* Event 10: Set nAutoFd high. */
-		parport_frob_control (port, PARPORT_CONTROL_AUTOFD, 0);
-
-		/* Event 11: nAck goes high. */
-		if (parport_wait_peripheral (port,
-					     PARPORT_STATUS_ACK,
-					     PARPORT_STATUS_ACK)) {
-			/* Timeout -- no more data? */
-			DBG("%s: Nibble timeout at event 11\n",
-				 port->name);
-			break;
-		}
-
-		/* Read upper nibble */
-		nibble[1] = parport_read_status (port) >>3;
-
-		/* reassemble the byte */
-		for (j = 0; j < 2 ; j++ ) {
-			nibble[j] &= ~8;
-			if ((nibble[j] & 0x10) == 0)
-				nibble[j] |= 8;
-			nibble[j] &= 0xf;
-		}
-		byte = (nibble[0] |(nibble[1] << 4));
-		*buf++ = byte;
-
-		if(byte == EOI)
-		  endseen++;
-		else
-		  endseen = 0;
-	}
-	return i;
-}
-
-/****************************************************************************
- *
- *  EndTransferMode
- *
- ***************************************************************************/
-static void EndTransferMode(struct pp_cam_entry *cam)
-{
-	parport_negotiate(cam->port, IEEE1284_MODE_COMPAT);
-}
-
-/****************************************************************************
- *
- *  ForwardSetup
- *
- ***************************************************************************/
-static int ForwardSetup(struct pp_cam_entry *cam)
-{
-	int retry;
-
-	/* The CPiA uses ECP protocol for Downloads from the Host to the camera.
-	 * This will be software-emulated if ECP hardware is not present
-	 */
-
-	/* the usual camera maximum response time is 10ms, but after receiving
-	 * some commands, it needs up to 40ms. (Data Sheet p. 32)*/
-
-	for(retry = 0; retry < 4; ++retry) {
-		if(!parport_negotiate(cam->port, IEEE1284_MODE_ECP)) {
-			break;
-		}
-		mdelay(10);
-	}
-	if(retry == 4) {
-		DBG("Unable to negotiate IEEE1284 ECP Download mode\n");
-		return -1;
-	}
-	return 0;
-}
-/****************************************************************************
- *
- *  ReverseSetup
- *
- ***************************************************************************/
-static int ReverseSetup(struct pp_cam_entry *cam, int extensibility)
-{
-	int retry;
-	int upload_mode, mode = IEEE1284_MODE_ECP;
-	int transfer_mode = ECP_TRANSFER;
-
-	if (!(cam->port->modes & PARPORT_MODE_ECP) &&
-	     !(cam->port->modes & PARPORT_MODE_TRISTATE)) {
-		mode = IEEE1284_MODE_NIBBLE;
-		transfer_mode = NIBBLE_TRANSFER;
-	}
-
-	upload_mode = mode;
-	if(extensibility) mode = UPLOAD_FLAG|transfer_mode|IEEE1284_EXT_LINK;
-
-	/* the usual camera maximum response time is 10ms, but after
-	 * receiving some commands, it needs up to 40ms. */
-
-	for(retry = 0; retry < 4; ++retry) {
-		if(!parport_negotiate(cam->port, mode)) {
-			break;
-		}
-		mdelay(10);
-	}
-	if(retry == 4) {
-		if(extensibility)
-			DBG("Unable to negotiate upload extensibility mode\n");
-		else
-			DBG("Unable to negotiate upload mode\n");
-		return -1;
-	}
-	if(extensibility) cam->port->ieee1284.mode = upload_mode;
-	return 0;
-}
-
-/****************************************************************************
- *
- *  WritePacket
- *
- ***************************************************************************/
-static int WritePacket(struct pp_cam_entry *cam, const u8 *packet, size_t size)
-{
-	int retval=0;
-	int size_written;
-
-	if (packet == NULL) {
-		return -EINVAL;
-	}
-	if (ForwardSetup(cam)) {
-		DBG("Write failed in setup\n");
-		return -EIO;
-	}
-	size_written = parport_write(cam->port, packet, size);
-	if(size_written != size) {
-		DBG("Write failed, wrote %d/%d\n", size_written, size);
-		retval = -EIO;
-	}
-	EndTransferMode(cam);
-	return retval;
-}
-
-/****************************************************************************
- *
- *  ReadPacket
- *
- ***************************************************************************/
-static int ReadPacket(struct pp_cam_entry *cam, u8 *packet, size_t size)
-{
-	int retval=0;
-
-	if (packet == NULL) {
-		return -EINVAL;
-	}
-	if (ReverseSetup(cam, 0)) {
-		return -EIO;
-	}
-
-	/* support for CPiA variant nibble reads */
-	if(cam->port->ieee1284.mode == IEEE1284_MODE_NIBBLE) {
-		if(cpia_read_nibble(cam->port, packet, size, 0) != size)
-			retval = -EIO;
-	} else {
-		if(parport_read(cam->port, packet, size) != size)
-			retval = -EIO;
-	}
-	EndTransferMode(cam);
-	return retval;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_streamStart
- *
- ***************************************************************************/
-static int cpia_pp_streamStart(void *privdata)
-{
-	struct pp_cam_entry *cam = privdata;
-	DBG("\n");
-	cam->streaming=1;
-	cam->image_ready=0;
-	//if (ReverseSetup(cam,1)) return -EIO;
-	if(cam->stream_irq) cpia_parport_enable_irq(cam->port);
-	return 0;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_streamStop
- *
- ***************************************************************************/
-static int cpia_pp_streamStop(void *privdata)
-{
-	struct pp_cam_entry *cam = privdata;
-
-	DBG("\n");
-	cam->streaming=0;
-	cpia_parport_disable_irq(cam->port);
-	//EndTransferMode(cam);
-
-	return 0;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_streamRead
- *
- ***************************************************************************/
-static int cpia_pp_read(struct parport *port, u8 *buffer, int len)
-{
-	int bytes_read;
-
-	/* support for CPiA variant "nibble stream" reads */
-	if(port->ieee1284.mode == IEEE1284_MODE_NIBBLE)
-		bytes_read = cpia_read_nibble_stream(port,buffer,len,0);
-	else {
-		int new_bytes;
-		for(bytes_read=0; bytes_read<len; bytes_read += new_bytes) {
-			new_bytes = parport_read(port, buffer+bytes_read,
-						 len-bytes_read);
-			if(new_bytes < 0) break;
-		}
-	}
-	return bytes_read;
-}
-
-static int cpia_pp_streamRead(void *privdata, u8 *buffer, int noblock)
-{
-	struct pp_cam_entry *cam = privdata;
-	int read_bytes = 0;
-	int i, endseen, block_size, new_bytes;
-
-	if(cam == NULL) {
-		DBG("Internal driver error: cam is NULL\n");
-		return -EINVAL;
-	}
-	if(buffer == NULL) {
-		DBG("Internal driver error: buffer is NULL\n");
-		return -EINVAL;
-	}
-	//if(cam->streaming) DBG("%d / %d\n", cam->image_ready, noblock);
-	if( cam->stream_irq ) {
-		DBG("%d\n", cam->image_ready);
-		cam->image_ready--;
-	}
-	cam->image_complete=0;
-	if (0/*cam->streaming*/) {
-		if(!cam->image_ready) {
-			if(noblock) return -EWOULDBLOCK;
-			interruptible_sleep_on(&cam->wq_stream);
-			if( signal_pending(current) ) return -EINTR;
-			DBG("%d\n", cam->image_ready);
-		}
-	} else {
-		if (ReverseSetup(cam, 1)) {
-			DBG("unable to ReverseSetup\n");
-			return -EIO;
-		}
-	}
-	endseen = 0;
-	block_size = PARPORT_CHUNK_SIZE;
-	while( !cam->image_complete ) {
-		cond_resched();
-
-		new_bytes = cpia_pp_read(cam->port, buffer, block_size );
-		if( new_bytes <= 0 ) {
-			break;
-		}
-		i=-1;
-		while(++i<new_bytes && endseen<4) {
-			if(*buffer==EOI) {
-				endseen++;
-			} else {
-				endseen=0;
-			}
-			buffer++;
-		}
-		read_bytes += i;
-		if( endseen==4 ) {
-			cam->image_complete=1;
-			break;
-		}
-		if( CPIA_MAX_IMAGE_SIZE-read_bytes <= PARPORT_CHUNK_SIZE ) {
-			block_size=CPIA_MAX_IMAGE_SIZE-read_bytes;
-		}
-	}
-	EndTransferMode(cam);
-	return cam->image_complete ? read_bytes : -EIO;
-}
-/****************************************************************************
- *
- *  cpia_pp_transferCmd
- *
- ***************************************************************************/
-static int cpia_pp_transferCmd(void *privdata, u8 *command, u8 *data)
-{
-	int err;
-	int retval=0;
-	int databytes;
-	struct pp_cam_entry *cam = privdata;
-
-	if(cam == NULL) {
-		DBG("Internal driver error: cam is NULL\n");
-		return -EINVAL;
-	}
-	if(command == NULL) {
-		DBG("Internal driver error: command is NULL\n");
-		return -EINVAL;
-	}
-	databytes = (((int)command[7])<<8) | command[6];
-	if ((err = WritePacket(cam, command, PACKET_LENGTH)) < 0) {
-		DBG("Error writing command\n");
-		return err;
-	}
-	if(command[0] == DATA_IN) {
-		u8 buffer[8];
-		if(data == NULL) {
-			DBG("Internal driver error: data is NULL\n");
-			return -EINVAL;
-		}
-		if((err = ReadPacket(cam, buffer, 8)) < 0) {
-			DBG("Error reading command result\n");
-		       return err;
-		}
-		memcpy(data, buffer, databytes);
-	} else if(command[0] == DATA_OUT) {
-		if(databytes > 0) {
-			if(data == NULL) {
-				DBG("Internal driver error: data is NULL\n");
-				retval = -EINVAL;
-			} else {
-				if((err=WritePacket(cam, data, databytes)) < 0){
-					DBG("Error writing command data\n");
-					return err;
-				}
-			}
-		}
-	} else {
-		DBG("Unexpected first byte of command: %x\n", command[0]);
-		retval = -EINVAL;
-	}
-	return retval;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_open
- *
- ***************************************************************************/
-static int cpia_pp_open(void *privdata)
-{
-	struct pp_cam_entry *cam = (struct pp_cam_entry *)privdata;
-
-	if (cam == NULL)
-		return -EINVAL;
-
-	if(cam->open_count == 0) {
-		if (parport_claim(cam->pdev)) {
-			DBG("failed to claim the port\n");
-			return -EBUSY;
-		}
-		parport_negotiate(cam->port, IEEE1284_MODE_COMPAT);
-		parport_data_forward(cam->port);
-		parport_write_control(cam->port, PARPORT_CONTROL_SELECT);
-		udelay(50);
-		parport_write_control(cam->port,
-				      PARPORT_CONTROL_SELECT
-				      | PARPORT_CONTROL_INIT);
-	}
-
-	++cam->open_count;
-
-	return 0;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_registerCallback
- *
- ***************************************************************************/
-static int cpia_pp_registerCallback(void *privdata, void (*cb)(void *cbdata), void *cbdata)
-{
-	struct pp_cam_entry *cam = privdata;
-	int retval = 0;
-
-	if(cam->port->irq != PARPORT_IRQ_NONE) {
-		cam->cb_func = cb;
-		cam->cb_data = cbdata;
-		INIT_WORK(&cam->cb_task, cpia_pp_run_callback);
-	} else {
-		retval = -1;
-	}
-	return retval;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_close
- *
- ***************************************************************************/
-static int cpia_pp_close(void *privdata)
-{
-	struct pp_cam_entry *cam = privdata;
-	if (--cam->open_count == 0) {
-		parport_release(cam->pdev);
-	}
-	return 0;
-}
-
-/****************************************************************************
- *
- *  cpia_pp_register
- *
- ***************************************************************************/
-static int cpia_pp_register(struct parport *port)
-{
-	struct pardevice *pdev = NULL;
-	struct pp_cam_entry *cam;
-	struct cam_data *cpia;
-
-	if (!(port->modes & PARPORT_MODE_PCSPP)) {
-		LOG("port is not supported by CPiA driver\n");
-		return -ENXIO;
-	}
-
-	cam = kzalloc(sizeof(struct pp_cam_entry), GFP_KERNEL);
-	if (cam == NULL) {
-		LOG("failed to allocate camera structure\n");
-		return -ENOMEM;
-	}
-
-	pdev = parport_register_device(port, "cpia_pp", NULL, NULL,
-				       NULL, 0, cam);
-
-	if (!pdev) {
-		LOG("failed to parport_register_device\n");
-		kfree(cam);
-		return -ENXIO;
-	}
-
-	cam->pdev = pdev;
-	cam->port = port;
-	init_waitqueue_head(&cam->wq_stream);
-
-	cam->streaming = 0;
-	cam->stream_irq = 0;
-
-	if((cpia = cpia_register_camera(&cpia_pp_ops, cam)) == NULL) {
-		LOG("failed to cpia_register_camera\n");
-		parport_unregister_device(pdev);
-		kfree(cam);
-		return -ENXIO;
-	}
-	spin_lock( &cam_list_lock_pp );
-	list_add( &cpia->cam_data_list, &cam_list );
-	spin_unlock( &cam_list_lock_pp );
-
-	return 0;
-}
-
-static void cpia_pp_detach (struct parport *port)
-{
-	struct list_head *tmp;
-	struct cam_data *cpia = NULL;
-	struct pp_cam_entry *cam;
-
-	spin_lock( &cam_list_lock_pp );
-	list_for_each (tmp, &cam_list) {
-		cpia = list_entry(tmp, struct cam_data, cam_data_list);
-		cam = (struct pp_cam_entry *) cpia->lowlevel_data;
-		if (cam && cam->port->number == port->number) {
-			list_del(&cpia->cam_data_list);
-			break;
-		}
-		cpia = NULL;
-	}
-	spin_unlock( &cam_list_lock_pp );
-
-	if (!cpia) {
-		DBG("cpia_pp_detach failed to find cam_data in cam_list\n");
-		return;
-	}
-
-	cam = (struct pp_cam_entry *) cpia->lowlevel_data;
-	cpia_unregister_camera(cpia);
-	if(cam->open_count > 0)
-		cpia_pp_close(cam);
-	parport_unregister_device(cam->pdev);
-	cpia->lowlevel_data = NULL;
-	kfree(cam);
-}
-
-static void cpia_pp_attach (struct parport *port)
-{
-	unsigned int i;
-
-	switch (parport_nr[0])
-	{
-	case PPCPIA_PARPORT_UNSPEC:
-	case PPCPIA_PARPORT_AUTO:
-		if (port->probe_info[0].class != PARPORT_CLASS_MEDIA ||
-		    port->probe_info[0].cmdset == NULL ||
-		    strncmp(port->probe_info[0].cmdset, "CPIA_1", 6) != 0)
-			return;
-
-		cpia_pp_register(port);
-
-		break;
-
-	default:
-		for (i = 0; i < PARPORT_MAX; ++i) {
-			if (port->number == parport_nr[i]) {
-				cpia_pp_register(port);
-				break;
-			}
-		}
-		break;
-	}
-}
-
-static struct parport_driver cpia_pp_driver = {
-	.name = "cpia_pp",
-	.attach = cpia_pp_attach,
-	.detach = cpia_pp_detach,
-};
-
-static int __init cpia_pp_init(void)
-{
-	printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
-	       CPIA_PP_MAJ_VER,CPIA_PP_MIN_VER,CPIA_PP_PATCH_VER);
-
-	if(parport_nr[0] == PPCPIA_PARPORT_OFF) {
-		printk("  disabled\n");
-		return 0;
-	}
-
-	spin_lock_init( &cam_list_lock_pp );
-
-	if (parport_register_driver (&cpia_pp_driver)) {
-		LOG ("unable to register with parport\n");
-		return -EIO;
-	}
-	return 0;
-}
-
-static int __init cpia_init(void)
-{
-	if (parport[0]) {
-		/* The user gave some parameters.  Let's see what they were. */
-		if (!strncmp(parport[0], "auto", 4)) {
-			parport_nr[0] = PPCPIA_PARPORT_AUTO;
-		} else {
-			int n;
-			for (n = 0; n < PARPORT_MAX && parport[n]; n++) {
-				if (!strncmp(parport[n], "none", 4)) {
-					parport_nr[n] = PPCPIA_PARPORT_NONE;
-				} else {
-					char *ep;
-					unsigned long r = simple_strtoul(parport[n], &ep, 0);
-					if (ep != parport[n]) {
-						parport_nr[n] = r;
-					} else {
-						LOG("bad port specifier `%s'\n", parport[n]);
-						return -ENODEV;
-					}
-				}
-			}
-		}
-	}
-	return cpia_pp_init();
-}
-
-static void __exit cpia_cleanup(void)
-{
-	parport_unregister_driver(&cpia_pp_driver);
-	return;
-}
-
-module_init(cpia_init);
-module_exit(cpia_cleanup);
diff --git a/drivers/staging/cpia/cpia_usb.c b/drivers/staging/cpia/cpia_usb.c
deleted file mode 100644
index 58d193ff591..00000000000
--- a/drivers/staging/cpia/cpia_usb.c
+++ /dev/null
@@ -1,640 +0,0 @@
-/*
- * cpia_usb CPiA USB driver
- *
- * Supports CPiA based parallel port Video Camera's.
- *
- * Copyright (C) 1999        Jochen Scharrlach <Jochen.Scharrlach@schwaben.de>
- * Copyright (C) 1999, 2000  Johannes Erdfelt <johannes@erdfelt.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* define _CPIA_DEBUG_ for verbose debug output (see cpia.h) */
-/* #define _CPIA_DEBUG_  1 */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/wait.h>
-#include <linux/list.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/usb.h>
-
-#include "cpia.h"
-
-#define USB_REQ_CPIA_GRAB_FRAME			0xC1
-#define USB_REQ_CPIA_UPLOAD_FRAME		0xC2
-#define  WAIT_FOR_NEXT_FRAME			0
-#define  FORCE_FRAME_UPLOAD			1
-
-#define FRAMES_PER_DESC		10
-#define FRAME_SIZE_PER_DESC	960	/* Shouldn't be hardcoded */
-#define CPIA_NUMSBUF		2
-#define STREAM_BUF_SIZE		(PAGE_SIZE * 4)
-#define SCRATCH_BUF_SIZE	(STREAM_BUF_SIZE * 2)
-
-struct cpia_sbuf {
-	char *data;
-	struct urb *urb;
-};
-
-#define FRAMEBUF_LEN (CPIA_MAX_FRAME_SIZE+100)
-enum framebuf_status {
-	FRAME_EMPTY,
-	FRAME_READING,
-	FRAME_READY,
-	FRAME_ERROR,
-};
-
-struct framebuf {
-	int length;
-	enum framebuf_status status;
-	u8 data[FRAMEBUF_LEN];
-	struct framebuf *next;
-};
-
-struct usb_cpia {
-	/* Device structure */
-	struct usb_device *dev;
-
-	unsigned char iface;
-	wait_queue_head_t wq_stream;
-
-	int cursbuf;		/* Current receiving sbuf */
-	struct cpia_sbuf sbuf[CPIA_NUMSBUF];		/* Double buffering */
-
-	int streaming;
-	int open;
-	int present;
-	struct framebuf *buffers[3];
-	struct framebuf *curbuff, *workbuff;
-};
-
-static int cpia_usb_open(void *privdata);
-static int cpia_usb_registerCallback(void *privdata, void (*cb) (void *cbdata),
-				     void *cbdata);
-static int cpia_usb_transferCmd(void *privdata, u8 *command, u8 *data);
-static int cpia_usb_streamStart(void *privdata);
-static int cpia_usb_streamStop(void *privdata);
-static int cpia_usb_streamRead(void *privdata, u8 *frame, int noblock);
-static int cpia_usb_close(void *privdata);
-
-#define ABOUT "USB driver for Vision CPiA based cameras"
-
-static struct cpia_camera_ops cpia_usb_ops = {
-	cpia_usb_open,
-	cpia_usb_registerCallback,
-	cpia_usb_transferCmd,
-	cpia_usb_streamStart,
-	cpia_usb_streamStop,
-	cpia_usb_streamRead,
-	cpia_usb_close,
-	0,
-	THIS_MODULE
-};
-
-static LIST_HEAD(cam_list);
-static spinlock_t cam_list_lock_usb;
-
-static void cpia_usb_complete(struct urb *urb)
-{
-	int i;
-	char *cdata;
-	struct usb_cpia *ucpia;
-
-	if (!urb || !urb->context)
-		return;
-
-	ucpia = (struct usb_cpia *) urb->context;
-
-	if (!ucpia->dev || !ucpia->streaming || !ucpia->present || !ucpia->open)
-		return;
-
-	if (ucpia->workbuff->status == FRAME_EMPTY) {
-		ucpia->workbuff->status = FRAME_READING;
-		ucpia->workbuff->length = 0;
-	}
-
-	for (i = 0; i < urb->number_of_packets; i++) {
-		int n = urb->iso_frame_desc[i].actual_length;
-		int st = urb->iso_frame_desc[i].status;
-
-		cdata = urb->transfer_buffer + urb->iso_frame_desc[i].offset;
-
-		if (st)
-			printk(KERN_DEBUG "cpia data error: [%d] len=%d, status=%X\n", i, n, st);
-
-		if (FRAMEBUF_LEN < ucpia->workbuff->length + n) {
-			printk(KERN_DEBUG "cpia: scratch buf overflow!scr_len: %d, n: %d\n", ucpia->workbuff->length, n);
-			return;
-		}
-
-		if (n) {
-			if ((ucpia->workbuff->length > 0) ||
-			    (0x19 == cdata[0] && 0x68 == cdata[1])) {
-				memcpy(ucpia->workbuff->data + ucpia->workbuff->length, cdata, n);
-				ucpia->workbuff->length += n;
-			} else
-				DBG("Ignoring packet!\n");
-		} else {
-			if (ucpia->workbuff->length > 4 &&
-			    0xff == ucpia->workbuff->data[ucpia->workbuff->length-1] &&
-			    0xff == ucpia->workbuff->data[ucpia->workbuff->length-2] &&
-			    0xff == ucpia->workbuff->data[ucpia->workbuff->length-3] &&
-			    0xff == ucpia->workbuff->data[ucpia->workbuff->length-4]) {
-				ucpia->workbuff->status = FRAME_READY;
-				ucpia->curbuff = ucpia->workbuff;
-				ucpia->workbuff = ucpia->workbuff->next;
-				ucpia->workbuff->status = FRAME_EMPTY;
-				ucpia->workbuff->length = 0;
-
-				if (waitqueue_active(&ucpia->wq_stream))
-					wake_up_interruptible(&ucpia->wq_stream);
-			}
-		}
-	}
-
-	/* resubmit */
-	urb->dev = ucpia->dev;
-	if ((i = usb_submit_urb(urb, GFP_ATOMIC)) != 0)
-		printk(KERN_ERR "%s: usb_submit_urb ret %d\n", __func__,  i);
-}
-
-static int cpia_usb_open(void *privdata)
-{
-	struct usb_cpia *ucpia = (struct usb_cpia *) privdata;
-	struct urb *urb;
-	int ret, retval = 0, fx, err;
-
-	if (!ucpia)
-		return -EINVAL;
-
-	ucpia->sbuf[0].data = kmalloc(FRAMES_PER_DESC * FRAME_SIZE_PER_DESC, GFP_KERNEL);
-	if (!ucpia->sbuf[0].data)
-		return -EINVAL;
-
-	ucpia->sbuf[1].data = kmalloc(FRAMES_PER_DESC * FRAME_SIZE_PER_DESC, GFP_KERNEL);
-	if (!ucpia->sbuf[1].data) {
-		retval = -EINVAL;
-		goto error_0;
-	}
-
-	ret = usb_set_interface(ucpia->dev, ucpia->iface, 3);
-	if (ret < 0) {
-		printk(KERN_ERR "cpia_usb_open: usb_set_interface error (ret = %d)\n", ret);
-		retval = -EBUSY;
-		goto error_1;
-	}
-
-	ucpia->buffers[0]->status = FRAME_EMPTY;
-	ucpia->buffers[0]->length = 0;
-	ucpia->buffers[1]->status = FRAME_EMPTY;
-	ucpia->buffers[1]->length = 0;
-	ucpia->buffers[2]->status = FRAME_EMPTY;
-	ucpia->buffers[2]->length = 0;
-	ucpia->curbuff = ucpia->buffers[0];
-	ucpia->workbuff = ucpia->buffers[1];
-
-	/* We double buffer the Iso lists, and also know the polling
-	 * interval is every frame (1 == (1 << (bInterval -1))).
-	 */
-	urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
-	if (!urb) {
-		printk(KERN_ERR "cpia_init_isoc: usb_alloc_urb 0\n");
-		retval = -ENOMEM;
-		goto error_1;
-	}
-
-	ucpia->sbuf[0].urb = urb;
-	urb->dev = ucpia->dev;
-	urb->context = ucpia;
-	urb->pipe = usb_rcvisocpipe(ucpia->dev, 1);
-	urb->transfer_flags = URB_ISO_ASAP;
-	urb->transfer_buffer = ucpia->sbuf[0].data;
-	urb->complete = cpia_usb_complete;
-	urb->number_of_packets = FRAMES_PER_DESC;
-	urb->interval = 1;
-	urb->transfer_buffer_length = FRAME_SIZE_PER_DESC * FRAMES_PER_DESC;
-	for (fx = 0; fx < FRAMES_PER_DESC; fx++) {
-		urb->iso_frame_desc[fx].offset = FRAME_SIZE_PER_DESC * fx;
-		urb->iso_frame_desc[fx].length = FRAME_SIZE_PER_DESC;
-	}
-
-	urb = usb_alloc_urb(FRAMES_PER_DESC, GFP_KERNEL);
-	if (!urb) {
-		printk(KERN_ERR "cpia_init_isoc: usb_alloc_urb 1\n");
-		retval = -ENOMEM;
-		goto error_urb0;
-	}
-
-	ucpia->sbuf[1].urb = urb;
-	urb->dev = ucpia->dev;
-	urb->context = ucpia;
-	urb->pipe = usb_rcvisocpipe(ucpia->dev, 1);
-	urb->transfer_flags = URB_ISO_ASAP;
-	urb->transfer_buffer = ucpia->sbuf[1].data;
-	urb->complete = cpia_usb_complete;
-	urb->number_of_packets = FRAMES_PER_DESC;
-	urb->interval = 1;
-	urb->transfer_buffer_length = FRAME_SIZE_PER_DESC * FRAMES_PER_DESC;
-	for (fx = 0; fx < FRAMES_PER_DESC; fx++) {
-		urb->iso_frame_desc[fx].offset = FRAME_SIZE_PER_DESC * fx;
-		urb->iso_frame_desc[fx].length = FRAME_SIZE_PER_DESC;
-	}
-
-	/* queue the ISO urbs, and resubmit in the completion handler */
-	err = usb_submit_urb(ucpia->sbuf[0].urb, GFP_KERNEL);
-	if (err) {
-		printk(KERN_ERR "cpia_init_isoc: usb_submit_urb 0 ret %d\n",
-			err);
-		goto error_urb1;
-	}
-	err = usb_submit_urb(ucpia->sbuf[1].urb, GFP_KERNEL);
-	if (err) {
-		printk(KERN_ERR "cpia_init_isoc: usb_submit_urb 1 ret %d\n",
-			err);
-		goto error_urb1;
-	}
-
-	ucpia->streaming = 1;
-	ucpia->open = 1;
-
-	return 0;
-
-error_urb1:		/* free urb 1 */
-	usb_free_urb(ucpia->sbuf[1].urb);
-	ucpia->sbuf[1].urb = NULL;
-error_urb0:		/* free urb 0 */
-	usb_free_urb(ucpia->sbuf[0].urb);
-	ucpia->sbuf[0].urb = NULL;
-error_1:
-	kfree (ucpia->sbuf[1].data);
-	ucpia->sbuf[1].data = NULL;
-error_0:
-	kfree (ucpia->sbuf[0].data);
-	ucpia->sbuf[0].data = NULL;
-
-	return retval;
-}
-
-//
-// convenience functions
-//
-
-/****************************************************************************
- *
- *  WritePacket
- *
- ***************************************************************************/
-static int WritePacket(struct usb_device *udev, const u8 *packet, u8 *buf, size_t size)
-{
-	if (!packet)
-		return -EINVAL;
-
-	return usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
-			 packet[1] + (packet[0] << 8),
-			 USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			 packet[2] + (packet[3] << 8),
-			 packet[4] + (packet[5] << 8), buf, size, 1000);
-}
-
-/****************************************************************************
- *
- *  ReadPacket
- *
- ***************************************************************************/
-static int ReadPacket(struct usb_device *udev, u8 *packet, u8 *buf, size_t size)
-{
-	if (!packet || size <= 0)
-		return -EINVAL;
-
-	return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
-			 packet[1] + (packet[0] << 8),
-			 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			 packet[2] + (packet[3] << 8),
-			 packet[4] + (packet[5] << 8), buf, size, 1000);
-}
-
-static int cpia_usb_transferCmd(void *privdata, u8 *command, u8 *data)
-{
-	int err = 0;
-	int databytes;
-	struct usb_cpia *ucpia = (struct usb_cpia *)privdata;
-	struct usb_device *udev = ucpia->dev;
-
-	if (!udev) {
-		DBG("Internal driver error: udev is NULL\n");
-		return -EINVAL;
-	}
-
-	if (!command) {
-		DBG("Internal driver error: command is NULL\n");
-		return -EINVAL;
-	}
-
-	databytes = (((int)command[7])<<8) | command[6];
-
-	if (command[0] == DATA_IN) {
-		u8 buffer[8];
-
-		if (!data) {
-			DBG("Internal driver error: data is NULL\n");
-			return -EINVAL;
-		}
-
-		err = ReadPacket(udev, command, buffer, 8);
-		if (err < 0)
-			return err;
-
-		memcpy(data, buffer, databytes);
-	} else if(command[0] == DATA_OUT)
-		WritePacket(udev, command, data, databytes);
-	else {
-		DBG("Unexpected first byte of command: %x\n", command[0]);
-		err = -EINVAL;
-	}
-
-	return 0;
-}
-
-static int cpia_usb_registerCallback(void *privdata, void (*cb) (void *cbdata),
-	void *cbdata)
-{
-	return -ENODEV;
-}
-
-static int cpia_usb_streamStart(void *privdata)
-{
-	return -ENODEV;
-}
-
-static int cpia_usb_streamStop(void *privdata)
-{
-	return -ENODEV;
-}
-
-static int cpia_usb_streamRead(void *privdata, u8 *frame, int noblock)
-{
-	struct usb_cpia *ucpia = (struct usb_cpia *) privdata;
-	struct framebuf *mybuff;
-
-	if (!ucpia || !ucpia->present)
-		return -1;
-
-	if (ucpia->curbuff->status != FRAME_READY)
-		interruptible_sleep_on(&ucpia->wq_stream);
-	else
-		DBG("Frame already waiting!\n");
-
-	mybuff = ucpia->curbuff;
-
-	if (!mybuff)
-		return -1;
-
-	if (mybuff->status != FRAME_READY || mybuff->length < 4) {
-		DBG("Something went wrong!\n");
-		return -1;
-	}
-
-	memcpy(frame, mybuff->data, mybuff->length);
-	mybuff->status = FRAME_EMPTY;
-
-/*   DBG("read done, %d bytes, Header: %x/%x, Footer: %x%x%x%x\n",  */
-/*       mybuff->length, frame[0], frame[1], */
-/*       frame[mybuff->length-4], frame[mybuff->length-3],  */
-/*       frame[mybuff->length-2], frame[mybuff->length-1]); */
-
-	return mybuff->length;
-}
-
-static void cpia_usb_free_resources(struct usb_cpia *ucpia, int try)
-{
-	if (!ucpia->streaming)
-		return;
-
-	ucpia->streaming = 0;
-
-	/* Set packet size to 0 */
-	if (try) {
-		int ret;
-
-		ret = usb_set_interface(ucpia->dev, ucpia->iface, 0);
-		if (ret < 0) {
-			printk(KERN_ERR "usb_set_interface error (ret = %d)\n", ret);
-			return;
-		}
-	}
-
-	/* Unschedule all of the iso td's */
-	if (ucpia->sbuf[1].urb) {
-		usb_kill_urb(ucpia->sbuf[1].urb);
-		usb_free_urb(ucpia->sbuf[1].urb);
-		ucpia->sbuf[1].urb = NULL;
-	}
-
-	kfree(ucpia->sbuf[1].data);
-	ucpia->sbuf[1].data = NULL;
-
-	if (ucpia->sbuf[0].urb) {
-		usb_kill_urb(ucpia->sbuf[0].urb);
-		usb_free_urb(ucpia->sbuf[0].urb);
-		ucpia->sbuf[0].urb = NULL;
-	}
-
-	kfree(ucpia->sbuf[0].data);
-	ucpia->sbuf[0].data = NULL;
-}
-
-static int cpia_usb_close(void *privdata)
-{
-	struct usb_cpia *ucpia = (struct usb_cpia *) privdata;
-
-	if(!ucpia)
-		return -ENODEV;
-
-	ucpia->open = 0;
-
-	/* ucpia->present = 0 protects against trying to reset the
-	 * alt setting if camera is physically disconnected while open */
-	cpia_usb_free_resources(ucpia, ucpia->present);
-
-	return 0;
-}
-
-/* Probing and initializing */
-
-static int cpia_probe(struct usb_interface *intf,
-		      const struct usb_device_id *id)
-{
-	struct usb_device *udev = interface_to_usbdev(intf);
-	struct usb_host_interface *interface;
-	struct usb_cpia *ucpia;
-	struct cam_data *cam;
-	int ret;
-
-	/* A multi-config CPiA camera? */
-	if (udev->descriptor.bNumConfigurations != 1)
-		return -ENODEV;
-
-	interface = intf->cur_altsetting;
-
-	printk(KERN_INFO "USB CPiA camera found\n");
-
-	ucpia = kzalloc(sizeof(*ucpia), GFP_KERNEL);
-	if (!ucpia) {
-		printk(KERN_ERR "couldn't kmalloc cpia struct\n");
-		return -ENOMEM;
-	}
-
-	ucpia->dev = udev;
-	ucpia->iface = interface->desc.bInterfaceNumber;
-	init_waitqueue_head(&ucpia->wq_stream);
-
-	ucpia->buffers[0] = vmalloc(sizeof(*ucpia->buffers[0]));
-	if (!ucpia->buffers[0]) {
-		printk(KERN_ERR "couldn't vmalloc frame buffer 0\n");
-		goto fail_alloc_0;
-	}
-
-	ucpia->buffers[1] = vmalloc(sizeof(*ucpia->buffers[1]));
-	if (!ucpia->buffers[1]) {
-		printk(KERN_ERR "couldn't vmalloc frame buffer 1\n");
-		goto fail_alloc_1;
-	}
-
-	ucpia->buffers[2] = vmalloc(sizeof(*ucpia->buffers[2]));
-	if (!ucpia->buffers[2]) {
-		printk(KERN_ERR "couldn't vmalloc frame buffer 2\n");
-		goto fail_alloc_2;
-	}
-
-	ucpia->buffers[0]->next = ucpia->buffers[1];
-	ucpia->buffers[1]->next = ucpia->buffers[2];
-	ucpia->buffers[2]->next = ucpia->buffers[0];
-
-	ret = usb_set_interface(udev, ucpia->iface, 0);
-	if (ret < 0) {
-		printk(KERN_ERR "cpia_probe: usb_set_interface error (ret = %d)\n", ret);
-		/* goto fail_all; */
-	}
-
-	/* Before register_camera, important */
-	ucpia->present = 1;
-
-	cam = cpia_register_camera(&cpia_usb_ops, ucpia);
-	if (!cam) {
-		LOG("failed to cpia_register_camera\n");
-		goto fail_all;
-	}
-
-	spin_lock( &cam_list_lock_usb );
-	list_add( &cam->cam_data_list, &cam_list );
-	spin_unlock( &cam_list_lock_usb );
-
-	usb_set_intfdata(intf, cam);
-	return 0;
-
-fail_all:
-	vfree(ucpia->buffers[2]);
-	ucpia->buffers[2] = NULL;
-fail_alloc_2:
-	vfree(ucpia->buffers[1]);
-	ucpia->buffers[1] = NULL;
-fail_alloc_1:
-	vfree(ucpia->buffers[0]);
-	ucpia->buffers[0] = NULL;
-fail_alloc_0:
-	kfree(ucpia);
-	return -EIO;
-}
-
-static void cpia_disconnect(struct usb_interface *intf);
-
-static struct usb_device_id cpia_id_table [] = {
-	{ USB_DEVICE(0x0553, 0x0002) },
-	{ USB_DEVICE(0x0813, 0x0001) },
-	{ }					/* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE (usb, cpia_id_table);
-MODULE_LICENSE("GPL");
-
-
-static struct usb_driver cpia_driver = {
-	.name		= "cpia",
-	.probe		= cpia_probe,
-	.disconnect	= cpia_disconnect,
-	.id_table	= cpia_id_table,
-};
-
-static void cpia_disconnect(struct usb_interface *intf)
-{
-	struct cam_data *cam = usb_get_intfdata(intf);
-	struct usb_cpia *ucpia;
-
-	usb_set_intfdata(intf, NULL);
-	if (!cam)
-		return;
-
-	ucpia = (struct usb_cpia *) cam->lowlevel_data;
-	spin_lock( &cam_list_lock_usb );
-	list_del(&cam->cam_data_list);
-	spin_unlock( &cam_list_lock_usb );
-
-	ucpia->present = 0;
-
-	cpia_unregister_camera(cam);
-	if(ucpia->open)
-		cpia_usb_close(cam->lowlevel_data);
-
-	ucpia->curbuff->status = FRAME_ERROR;
-
-	if (waitqueue_active(&ucpia->wq_stream))
-		wake_up_interruptible(&ucpia->wq_stream);
-
-	ucpia->curbuff = ucpia->workbuff = NULL;
-
-	vfree(ucpia->buffers[2]);
-	ucpia->buffers[2] = NULL;
-
-	vfree(ucpia->buffers[1]);
-	ucpia->buffers[1] = NULL;
-
-	vfree(ucpia->buffers[0]);
-	ucpia->buffers[0] = NULL;
-
-	cam->lowlevel_data = NULL;
-	kfree(ucpia);
-}
-
-static int __init usb_cpia_init(void)
-{
-	printk(KERN_INFO "%s v%d.%d.%d\n",ABOUT,
-	       CPIA_USB_MAJ_VER,CPIA_USB_MIN_VER,CPIA_USB_PATCH_VER);
-
-	spin_lock_init(&cam_list_lock_usb);
-	return usb_register(&cpia_driver);
-}
-
-static void __exit usb_cpia_cleanup(void)
-{
-	usb_deregister(&cpia_driver);
-}
-
-
-module_init (usb_cpia_init);
-module_exit (usb_cpia_cleanup);
-
diff --git a/drivers/staging/cx25821/Kconfig b/drivers/staging/cx25821/Kconfig
index 1d73334d2a4..b2656957aa8 100644
--- a/drivers/staging/cx25821/Kconfig
+++ b/drivers/staging/cx25821/Kconfig
@@ -1,11 +1,11 @@
 config VIDEO_CX25821
 	tristate "Conexant cx25821 support"
-	depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT
+	depends on DVB_CORE && VIDEO_DEV && PCI && I2C
 	depends on BKL # please fix
 	select I2C_ALGOBIT
 	select VIDEO_BTCX
 	select VIDEO_TVEEPROM
-	depends on VIDEO_IR
+	depends on RC_CORE
 	select VIDEOBUF_DVB
 	select VIDEOBUF_DMA_SG
 	select VIDEO_CX25840
diff --git a/drivers/staging/cx25821/cx25821-alsa.c b/drivers/staging/cx25821/cx25821-alsa.c
index 2a01dc057b2..9a205a342c5 100644
--- a/drivers/staging/cx25821/cx25821-alsa.c
+++ b/drivers/staging/cx25821/cx25821-alsa.c
@@ -20,6 +20,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
@@ -42,11 +44,16 @@
 
 #define AUDIO_SRAM_CHANNEL	SRAM_CH08
 
-#define dprintk(level, fmt, arg...)	if (debug >= level) \
-	printk(KERN_INFO "%s/1: " fmt, chip->dev->name , ## arg)
-
-#define dprintk_core(level, fmt, arg...)	if (debug >= level) \
-	printk(KERN_DEBUG "%s/1: " fmt, chip->dev->name , ## arg)
+#define dprintk(level, fmt, arg...)				\
+do {								\
+	if (debug >= level)					\
+		pr_info("%s/1: " fmt, chip->dev->name, ##arg);	\
+} while (0)
+#define dprintk_core(level, fmt, arg...)				\
+do {									\
+	if (debug >= level)						\
+		printk(KERN_DEBUG "%s/1: " fmt, chip->dev->name, ##arg); \
+} while (0)
 
 /****************************************************************************
 	Data type declarations - Can be moded to a header file later
@@ -173,12 +180,11 @@ static int _cx25821_start_audio_dma(struct cx25821_audio_dev *chip)
 		 tmp | FLD_AUD_DST_PK_MODE | FLD_AUD_DST_ENABLE |
 		 FLD_AUD_CLK_ENABLE);
 
-	/* printk(KERN_INFO "DEBUG: Start audio DMA, %d B/line,"
-				"cmds_start(0x%x)= %d lines/FIFO, %d periods, "
-				"%d byte buffer\n", buf->bpl,
-				audio_ch->cmds_start,
-				cx_read(audio_ch->cmds_start + 12)>>1,
-				chip->num_periods, buf->bpl *chip->num_periods);
+	/*
+	pr_info("DEBUG: Start audio DMA, %d B/line, cmds_start(0x%x)= %d lines/FIFO, %d periods, %d byte buffer\n",
+		buf->bpl, audio_ch->cmds_start,
+		cx_read(audio_ch->cmds_start + 12)>>1,
+		chip->num_periods, buf->bpl * chip->num_periods);
 	*/
 
 	/* Enables corresponding bits at AUD_INT_STAT */
@@ -259,8 +265,7 @@ static void cx25821_aud_irq(struct cx25821_audio_dev *chip, u32 status,
 
 	/* risc op code error */
 	if (status & AUD_INT_OPC_ERR) {
-		printk(KERN_WARNING "WARNING %s/1: Audio risc op code error\n",
-		       dev->name);
+		pr_warn("WARNING %s/1: Audio risc op code error\n", dev->name);
 
 		cx_clear(AUD_INT_DMA_CTL,
 			 FLD_AUD_DST_A_RISC_EN | FLD_AUD_DST_A_FIFO_EN);
@@ -269,8 +274,7 @@ static void cx25821_aud_irq(struct cx25821_audio_dev *chip, u32 status,
 						[AUDIO_SRAM_CHANNEL]);
 	}
 	if (status & AUD_INT_DN_SYNC) {
-		printk(KERN_WARNING "WARNING %s: Downstream sync error!\n",
-		       dev->name);
+		pr_warn("WARNING %s: Downstream sync error!\n", dev->name);
 		cx_write(AUD_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET);
 		return;
 	}
@@ -388,8 +392,7 @@ static int snd_cx25821_pcm_open(struct snd_pcm_substream *substream)
 	unsigned int bpl = 0;
 
 	if (!chip) {
-		printk(KERN_ERR "DEBUG: cx25821 can't find device struct."
-		       " Can't proceed with open\n");
+		pr_err("DEBUG: cx25821 can't find device struct. Can't proceed with open\n");
 		return -ENODEV;
 	}
 
@@ -479,8 +482,7 @@ static int snd_cx25821_hw_params(struct snd_pcm_substream *substream,
 					  chip->period_size, chip->num_periods,
 					  1);
 	if (ret < 0) {
-		printk(KERN_INFO
-			"DEBUG: ERROR after cx25821_risc_databuffer_audio()\n");
+		pr_info("DEBUG: ERROR after cx25821_risc_databuffer_audio()\n");
 		goto error;
 	}
 
@@ -608,8 +610,7 @@ static int snd_cx25821_pcm(struct cx25821_audio_dev *chip, int device,
 
 	err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm);
 	if (err < 0) {
-		printk(KERN_INFO "ERROR: FAILED snd_pcm_new() in %s\n",
-		       __func__);
+		pr_info("ERROR: FAILED snd_pcm_new() in %s\n", __func__);
 		return err;
 	}
 	pcm->private_data = chip;
@@ -674,23 +675,21 @@ static int cx25821_audio_initdev(struct cx25821_dev *dev)
 	int err;
 
 	if (devno >= SNDRV_CARDS) {
-		printk(KERN_INFO "DEBUG ERROR: devno >= SNDRV_CARDS %s\n",
-		       __func__);
+		pr_info("DEBUG ERROR: devno >= SNDRV_CARDS %s\n", __func__);
 		return -ENODEV;
 	}
 
 	if (!enable[devno]) {
 		++devno;
-		printk(KERN_INFO "DEBUG ERROR: !enable[devno] %s\n", __func__);
+		pr_info("DEBUG ERROR: !enable[devno] %s\n", __func__);
 		return -ENOENT;
 	}
 
 	err = snd_card_create(index[devno], id[devno], THIS_MODULE,
 			 sizeof(struct cx25821_audio_dev), &card);
 	if (err < 0) {
-		printk(KERN_INFO
-		       "DEBUG ERROR: cannot create snd_card_new in %s\n",
-		       __func__);
+		pr_info("DEBUG ERROR: cannot create snd_card_new in %s\n",
+			__func__);
 		return err;
 	}
 
@@ -712,16 +711,15 @@ static int cx25821_audio_initdev(struct cx25821_dev *dev)
 			  IRQF_SHARED | IRQF_DISABLED, chip->dev->name, chip);
 
 	if (err < 0) {
-		printk(KERN_ERR "ERROR %s: can't get IRQ %d for ALSA\n",
+		pr_err("ERROR %s: can't get IRQ %d for ALSA\n",
 		       chip->dev->name, dev->pci->irq);
 		goto error;
 	}
 
 	err = snd_cx25821_pcm(chip, 0, "cx25821 Digital");
 	if (err < 0) {
-		printk(KERN_INFO
-		       "DEBUG ERROR: cannot create snd_cx25821_pcm %s\n",
-		       __func__);
+		pr_info("DEBUG ERROR: cannot create snd_cx25821_pcm %s\n",
+			__func__);
 		goto error;
 	}
 
@@ -732,13 +730,13 @@ static int cx25821_audio_initdev(struct cx25821_dev *dev)
 		chip->iobase, chip->irq);
 	strcpy(card->mixername, "CX25821");
 
-	printk(KERN_INFO "%s/%i: ALSA support for cx25821 boards\n",
-	       card->driver, devno);
+	pr_info("%s/%i: ALSA support for cx25821 boards\n",
+		card->driver, devno);
 
 	err = snd_card_register(card);
 	if (err < 0) {
-		printk(KERN_INFO "DEBUG ERROR: cannot register sound card %s\n",
-		       __func__);
+		pr_info("DEBUG ERROR: cannot register sound card %s\n",
+			__func__);
 		goto error;
 	}
 
@@ -778,8 +776,7 @@ static int cx25821_alsa_init(void)
 	}
 
 	if (dev == NULL)
-		printk(KERN_INFO
-		       "cx25821 ERROR ALSA: no cx25821 cards found\n");
+		pr_info("ERROR ALSA: no cx25821 cards found\n");
 
 	return 0;
 
diff --git a/drivers/staging/cx25821/cx25821-audio-upstream.c b/drivers/staging/cx25821/cx25821-audio-upstream.c
index 1607b0d86e6..7992a3ba526 100644
--- a/drivers/staging/cx25821/cx25821-audio-upstream.c
+++ b/drivers/staging/cx25821/cx25821-audio-upstream.c
@@ -20,6 +20,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "cx25821-video.h"
 #include "cx25821-audio-upstream.h"
 
@@ -221,7 +223,7 @@ void cx25821_stop_upstream_audio(struct cx25821_dev *dev)
 
 	if (!dev->_audio_is_running) {
 		printk(KERN_DEBUG
-		    "cx25821: No audio file is currently running so return!\n");
+		       pr_fmt("No audio file is currently running so return!\n"));
 		return;
 	}
 	/* Disable RISC interrupts */
@@ -281,19 +283,19 @@ int cx25821_get_audio_data(struct cx25821_dev *dev,
 
 	if (IS_ERR(myfile)) {
 		const int open_errno = -PTR_ERR(myfile);
-		printk(KERN_ERR "%s(): ERROR opening file(%s) with errno = %d!\n",
+		pr_err("%s(): ERROR opening file(%s) with errno = %d!\n",
 		       __func__, dev->_audiofilename, open_errno);
 		return PTR_ERR(myfile);
 	} else {
 		if (!(myfile->f_op)) {
-			printk(KERN_ERR "%s: File has no file operations registered!\n",
+			pr_err("%s(): File has no file operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
 
 		if (!myfile->f_op->read) {
-			printk(KERN_ERR "%s: File has no READ operations registered!\n",
+			pr_err("%s(): File has no READ operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
@@ -320,9 +322,8 @@ int cx25821_get_audio_data(struct cx25821_dev *dev,
 			frame_offset += vfs_read_retval;
 
 			if (vfs_read_retval < line_size) {
-				printk(KERN_INFO
-				       "Done: exit %s() since no more bytes to read from Audio file.\n",
-				       __func__);
+				pr_info("Done: exit %s() since no more bytes to read from Audio file\n",
+					__func__);
 				break;
 			}
 		}
@@ -346,7 +347,7 @@ static void cx25821_audioups_handler(struct work_struct *work)
 	    container_of(work, struct cx25821_dev, _audio_work_entry);
 
 	if (!dev) {
-		printk(KERN_ERR "ERROR %s(): since container_of(work_struct) FAILED!\n",
+		pr_err("ERROR %s(): since container_of(work_struct) FAILED!\n",
 		       __func__);
 		return;
 	}
@@ -373,19 +374,19 @@ int cx25821_openfile_audio(struct cx25821_dev *dev,
 
 	if (IS_ERR(myfile)) {
 		const int open_errno = -PTR_ERR(myfile);
-		printk(KERN_ERR "%s(): ERROR opening file(%s) with errno = %d!\n",
+		pr_err("%s(): ERROR opening file(%s) with errno = %d!\n",
 		       __func__, dev->_audiofilename, open_errno);
 		return PTR_ERR(myfile);
 	} else {
 		if (!(myfile->f_op)) {
-			printk(KERN_ERR "%s: File has no file operations registered!\n",
+			pr_err("%s(): File has no file operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
 
 		if (!myfile->f_op->read) {
-			printk(KERN_ERR "%s: File has no READ operations registered!\n",
+			pr_err("%s(): File has no READ operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
@@ -414,9 +415,8 @@ int cx25821_openfile_audio(struct cx25821_dev *dev,
 				offset += vfs_read_retval;
 
 				if (vfs_read_retval < line_size) {
-					printk(KERN_INFO
-					       "Done: exit %s() since no more bytes to read from Audio file.\n",
-					       __func__);
+					pr_info("Done: exit %s() since no more bytes to read from Audio file\n",
+						__func__);
 					break;
 				}
 			}
@@ -459,7 +459,7 @@ static int cx25821_audio_upstream_buffer_prepare(struct cx25821_dev *dev,
 
 	if (!dev->_risc_virt_addr) {
 		printk(KERN_DEBUG
-			"cx25821 ERROR: pci_alloc_consistent() FAILED to allocate memory for RISC program! Returning.\n");
+		       pr_fmt("ERROR: pci_alloc_consistent() FAILED to allocate memory for RISC program! Returning\n"));
 		return -ENOMEM;
 	}
 	/* Clear out memory at address */
@@ -474,7 +474,7 @@ static int cx25821_audio_upstream_buffer_prepare(struct cx25821_dev *dev,
 
 	if (!dev->_audiodata_buf_virt_addr) {
 		printk(KERN_DEBUG
-			"cx25821 ERROR: pci_alloc_consistent() FAILED to allocate memory for data buffer! Returning.\n");
+		       pr_fmt("ERROR: pci_alloc_consistent() FAILED to allocate memory for data buffer! Returning\n"));
 		return -ENOMEM;
 	}
 	/* Clear out memory at address */
@@ -490,7 +490,7 @@ static int cx25821_audio_upstream_buffer_prepare(struct cx25821_dev *dev,
 					       dev->_audio_lines_count);
 	if (ret < 0) {
 		printk(KERN_DEBUG
-		      "cx25821 ERROR creating audio upstream RISC programs!\n");
+		       pr_fmt("ERROR creating audio upstream RISC programs!\n"));
 		goto error;
 	}
 
@@ -569,16 +569,16 @@ int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num,
 		spin_unlock(&dev->slock);
 	} else {
 		if (status & FLD_AUD_SRC_OF)
-			printk(KERN_WARNING "%s: Audio Received Overflow Error Interrupt!\n",
-			       __func__);
+			pr_warn("%s(): Audio Received Overflow Error Interrupt!\n",
+				__func__);
 
 		if (status & FLD_AUD_SRC_SYNC)
-			printk(KERN_WARNING "%s: Audio Received Sync Error Interrupt!\n",
-			       __func__);
+			pr_warn("%s(): Audio Received Sync Error Interrupt!\n",
+				__func__);
 
 		if (status & FLD_AUD_SRC_OPC_ERR)
-			printk(KERN_WARNING "%s: Audio Received OpCode Error Interrupt!\n",
-			       __func__);
+			pr_warn("%s(): Audio Received OpCode Error Interrupt!\n",
+				__func__);
 
 		/* Read and write back the interrupt status register to clear
 		 * our bits */
@@ -586,8 +586,8 @@ int cx25821_audio_upstream_irq(struct cx25821_dev *dev, int chan_num,
 	}
 
 	if (dev->_audiofile_status == END_OF_FILE) {
-		printk(KERN_WARNING "cx25821: EOF Channel Audio Framecount = %d\n",
-		       dev->_audioframe_count);
+		pr_warn("EOF Channel Audio Framecount = %d\n",
+			dev->_audioframe_count);
 		return -1;
 	}
 	/* ElSE, set the interrupt mask register, re-enable irq. */
@@ -644,9 +644,8 @@ static void cx25821_wait_fifo_enable(struct cx25821_dev *dev,
 
 		/* 10 millisecond timeout */
 		if (count++ > 1000) {
-			printk(KERN_ERR
-			       "cx25821 ERROR: %s() fifo is NOT turned on. Timeout!\n",
-			     __func__);
+			pr_err("ERROR: %s() fifo is NOT turned on. Timeout!\n",
+			       __func__);
 			return;
 		}
 
@@ -696,8 +695,8 @@ int cx25821_start_audio_dma_upstream(struct cx25821_dev *dev,
 	    request_irq(dev->pci->irq, cx25821_upstream_irq_audio,
 			IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
 	if (err < 0) {
-		printk(KERN_ERR "%s: can't get upstream IRQ %d\n", dev->name,
-		       dev->pci->irq);
+		pr_err("%s: can't get upstream IRQ %d\n",
+		       dev->name, dev->pci->irq);
 		goto fail_irq;
 	}
 
@@ -726,7 +725,7 @@ int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select)
 	int str_length = 0;
 
 	if (dev->_audio_is_running) {
-		printk(KERN_WARNING "Audio Channel is still running so return!\n");
+		pr_warn("Audio Channel is still running so return!\n");
 		return 0;
 	}
 
@@ -740,7 +739,7 @@ int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select)
 
 	if (!dev->_irq_audio_queues) {
 		printk(KERN_DEBUG
-			"cx25821 ERROR: create_singlethread_workqueue() for Audio FAILED!\n");
+		       pr_fmt("ERROR: create_singlethread_workqueue() for Audio FAILED!\n"));
 		return -ENOMEM;
 	}
 
@@ -787,8 +786,7 @@ int cx25821_audio_upstream_init(struct cx25821_dev *dev, int channel_select)
 	retval =
 	    cx25821_audio_upstream_buffer_prepare(dev, sram_ch, _line_size);
 	if (retval < 0) {
-		printk(KERN_ERR
-		       "%s: Failed to set up Audio upstream buffers!\n",
+		pr_err("%s: Failed to set up Audio upstream buffers!\n",
 		       dev->name);
 		goto error;
 	}
diff --git a/drivers/staging/cx25821/cx25821-cards.c b/drivers/staging/cx25821/cx25821-cards.c
index da0f56d50e2..94e8d685c88 100644
--- a/drivers/staging/cx25821/cx25821-cards.c
+++ b/drivers/staging/cx25821/cx25821-cards.c
@@ -21,6 +21,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
diff --git a/drivers/staging/cx25821/cx25821-core.c b/drivers/staging/cx25821/cx25821-core.c
index 300da319b06..a216b620b71 100644
--- a/drivers/staging/cx25821/cx25821-core.c
+++ b/drivers/staging/cx25821/cx25821-core.c
@@ -21,6 +21,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include "cx25821.h"
@@ -332,7 +334,7 @@ struct cx25821_dmaqueue mpegq;
 
 static int cx25821_risc_decode(u32 risc)
 {
-	static char *instr[16] = {
+	static const char * const instr[16] = {
 		[RISC_SYNC >> 28] = "sync",
 		[RISC_WRITE >> 28] = "write",
 		[RISC_WRITEC >> 28] = "writec",
@@ -344,7 +346,7 @@ static int cx25821_risc_decode(u32 risc)
 		[RISC_WRITECM >> 28] = "writecm",
 		[RISC_WRITECR >> 28] = "writecr",
 	};
-	static int incr[16] = {
+	static const int incr[16] = {
 		[RISC_WRITE >> 28] = 3,
 		[RISC_JUMP >> 28] = 3,
 		[RISC_SKIP >> 28] = 1,
@@ -353,7 +355,7 @@ static int cx25821_risc_decode(u32 risc)
 		[RISC_WRITECM >> 28] = 3,
 		[RISC_WRITECR >> 28] = 4,
 	};
-	static char *bits[] = {
+	static const char * const bits[] = {
 		"12", "13", "14", "resync",
 		"cnt0", "cnt1", "18", "19",
 		"20", "21", "22", "23",
@@ -361,13 +363,13 @@ static int cx25821_risc_decode(u32 risc)
 	};
 	int i;
 
-	printk("0x%08x [ %s", risc,
-	       instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
+	pr_cont("0x%08x [ %s",
+		risc, instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
 	for (i = ARRAY_SIZE(bits) - 1; i >= 0; i--) {
 		if (risc & (1 << (i + 12)))
-			printk(" %s", bits[i]);
+			pr_cont(" %s", bits[i]);
 	}
-	printk(" count=%d ]\n", risc & 0xfff);
+	pr_cont(" count=%d ]\n", risc & 0xfff);
 	return incr[risc >> 28] ? incr[risc >> 28] : 1;
 }
 
@@ -620,16 +622,15 @@ void cx25821_sram_channel_dump(struct cx25821_dev *dev, struct sram_channel *ch)
 	u32 risc;
 	unsigned int i, j, n;
 
-	printk(KERN_WARNING "%s: %s - dma channel status dump\n", dev->name,
-	       ch->name);
+	pr_warn("%s: %s - dma channel status dump\n", dev->name, ch->name);
 	for (i = 0; i < ARRAY_SIZE(name); i++)
-		printk(KERN_WARNING "cmds + 0x%2x:   %-15s: 0x%08x\n", i * 4,
-		       name[i], cx_read(ch->cmds_start + 4 * i));
+		pr_warn("cmds + 0x%2x:   %-15s: 0x%08x\n",
+			i * 4, name[i], cx_read(ch->cmds_start + 4 * i));
 
 	j = i * 4;
 	for (i = 0; i < 4;) {
 		risc = cx_read(ch->cmds_start + 4 * (i + 14));
-		printk(KERN_WARNING "cmds + 0x%2x:   risc%d: ", j + i * 4, i);
+		pr_warn("cmds + 0x%2x:   risc%d: ", j + i * 4, i);
 		i += cx25821_risc_decode(risc);
 	}
 
@@ -637,36 +638,35 @@ void cx25821_sram_channel_dump(struct cx25821_dev *dev, struct sram_channel *ch)
 		risc = cx_read(ch->ctrl_start + 4 * i);
 		/* No consideration for bits 63-32 */
 
-		printk(KERN_WARNING "ctrl + 0x%2x (0x%08x): iq %x: ", i * 4,
-		       ch->ctrl_start + 4 * i, i);
+		pr_warn("ctrl + 0x%2x (0x%08x): iq %x: ",
+			i * 4, ch->ctrl_start + 4 * i, i);
 		n = cx25821_risc_decode(risc);
 		for (j = 1; j < n; j++) {
 			risc = cx_read(ch->ctrl_start + 4 * (i + j));
-			printk(KERN_WARNING
-			       "ctrl + 0x%2x :   iq %x: 0x%08x [ arg #%d ]\n",
-			       4 * (i + j), i + j, risc, j);
+			pr_warn("ctrl + 0x%2x :   iq %x: 0x%08x [ arg #%d ]\n",
+				4 * (i + j), i + j, risc, j);
 		}
 	}
 
-	printk(KERN_WARNING "        :   fifo: 0x%08x -> 0x%x\n",
-	       ch->fifo_start, ch->fifo_start + ch->fifo_size);
-	printk(KERN_WARNING "        :   ctrl: 0x%08x -> 0x%x\n",
-	       ch->ctrl_start, ch->ctrl_start + 6 * 16);
-	printk(KERN_WARNING "        :   ptr1_reg: 0x%08x\n",
-	       cx_read(ch->ptr1_reg));
-	printk(KERN_WARNING "        :   ptr2_reg: 0x%08x\n",
-	       cx_read(ch->ptr2_reg));
-	printk(KERN_WARNING "        :   cnt1_reg: 0x%08x\n",
-	       cx_read(ch->cnt1_reg));
-	printk(KERN_WARNING "        :   cnt2_reg: 0x%08x\n",
-	       cx_read(ch->cnt2_reg));
+	pr_warn("        :   fifo: 0x%08x -> 0x%x\n",
+		ch->fifo_start, ch->fifo_start + ch->fifo_size);
+	pr_warn("        :   ctrl: 0x%08x -> 0x%x\n",
+		ch->ctrl_start, ch->ctrl_start + 6 * 16);
+	pr_warn("        :   ptr1_reg: 0x%08x\n",
+		cx_read(ch->ptr1_reg));
+	pr_warn("        :   ptr2_reg: 0x%08x\n",
+		cx_read(ch->ptr2_reg));
+	pr_warn("        :   cnt1_reg: 0x%08x\n",
+		cx_read(ch->cnt1_reg));
+	pr_warn("        :   cnt2_reg: 0x%08x\n",
+		cx_read(ch->cnt2_reg));
 }
 EXPORT_SYMBOL(cx25821_sram_channel_dump);
 
 void cx25821_sram_channel_dump_audio(struct cx25821_dev *dev,
 				     struct sram_channel *ch)
 {
-	static char *name[] = {
+	static const char * const name[] = {
 		"init risc lo",
 		"init risc hi",
 		"cdt base",
@@ -686,18 +686,18 @@ void cx25821_sram_channel_dump_audio(struct cx25821_dev *dev,
 	u32 risc, value, tmp;
 	unsigned int i, j, n;
 
-	printk(KERN_INFO "\n%s: %s - dma Audio channel status dump\n",
-	       dev->name, ch->name);
+	pr_info("\n%s: %s - dma Audio channel status dump\n",
+		dev->name, ch->name);
 
 	for (i = 0; i < ARRAY_SIZE(name); i++)
-		printk(KERN_INFO "%s: cmds + 0x%2x:   %-15s: 0x%08x\n",
-		       dev->name, i * 4, name[i],
-		       cx_read(ch->cmds_start + 4 * i));
+		pr_info("%s: cmds + 0x%2x:   %-15s: 0x%08x\n",
+			dev->name, i * 4, name[i],
+			cx_read(ch->cmds_start + 4 * i));
 
 	j = i * 4;
 	for (i = 0; i < 4;) {
 		risc = cx_read(ch->cmds_start + 4 * (i + 14));
-		printk(KERN_WARNING "cmds + 0x%2x:   risc%d: ", j + i * 4, i);
+		pr_warn("cmds + 0x%2x:   risc%d: ", j + i * 4, i);
 		i += cx25821_risc_decode(risc);
 	}
 
@@ -705,44 +705,43 @@ void cx25821_sram_channel_dump_audio(struct cx25821_dev *dev,
 		risc = cx_read(ch->ctrl_start + 4 * i);
 		/* No consideration for bits 63-32 */
 
-		printk(KERN_WARNING "ctrl + 0x%2x (0x%08x): iq %x: ", i * 4,
-		       ch->ctrl_start + 4 * i, i);
+		pr_warn("ctrl + 0x%2x (0x%08x): iq %x: ",
+			i * 4, ch->ctrl_start + 4 * i, i);
 		n = cx25821_risc_decode(risc);
 
 		for (j = 1; j < n; j++) {
 			risc = cx_read(ch->ctrl_start + 4 * (i + j));
-			printk(KERN_WARNING
-			       "ctrl + 0x%2x :   iq %x: 0x%08x [ arg #%d ]\n",
-			       4 * (i + j), i + j, risc, j);
+			pr_warn("ctrl + 0x%2x :   iq %x: 0x%08x [ arg #%d ]\n",
+				4 * (i + j), i + j, risc, j);
 		}
 	}
 
-	printk(KERN_WARNING "        :   fifo: 0x%08x -> 0x%x\n",
-	       ch->fifo_start, ch->fifo_start + ch->fifo_size);
-	printk(KERN_WARNING "        :   ctrl: 0x%08x -> 0x%x\n",
-	       ch->ctrl_start, ch->ctrl_start + 6 * 16);
-	printk(KERN_WARNING "        :   ptr1_reg: 0x%08x\n",
-	       cx_read(ch->ptr1_reg));
-	printk(KERN_WARNING "        :   ptr2_reg: 0x%08x\n",
-	       cx_read(ch->ptr2_reg));
-	printk(KERN_WARNING "        :   cnt1_reg: 0x%08x\n",
-	       cx_read(ch->cnt1_reg));
-	printk(KERN_WARNING "        :   cnt2_reg: 0x%08x\n",
-	       cx_read(ch->cnt2_reg));
+	pr_warn("        :   fifo: 0x%08x -> 0x%x\n",
+		ch->fifo_start, ch->fifo_start + ch->fifo_size);
+	pr_warn("        :   ctrl: 0x%08x -> 0x%x\n",
+		ch->ctrl_start, ch->ctrl_start + 6 * 16);
+	pr_warn("        :   ptr1_reg: 0x%08x\n",
+		cx_read(ch->ptr1_reg));
+	pr_warn("        :   ptr2_reg: 0x%08x\n",
+		cx_read(ch->ptr2_reg));
+	pr_warn("        :   cnt1_reg: 0x%08x\n",
+		cx_read(ch->cnt1_reg));
+	pr_warn("        :   cnt2_reg: 0x%08x\n",
+		cx_read(ch->cnt2_reg));
 
 	for (i = 0; i < 4; i++) {
 		risc = cx_read(ch->cmds_start + 56 + (i * 4));
-		printk(KERN_WARNING "instruction %d = 0x%x\n", i, risc);
+		pr_warn("instruction %d = 0x%x\n", i, risc);
 	}
 
 	/* read data from the first cdt buffer */
 	risc = cx_read(AUD_A_CDT);
-	printk(KERN_WARNING "\nread cdt loc=0x%x\n", risc);
+	pr_warn("\nread cdt loc=0x%x\n", risc);
 	for (i = 0; i < 8; i++) {
 		n = cx_read(risc + i * 4);
-		printk(KERN_WARNING "0x%x ", n);
+		pr_cont("0x%x ", n);
 	}
-	printk(KERN_WARNING "\n\n");
+	pr_cont("\n\n");
 
 	value = cx_read(CLK_RST);
 	CX25821_INFO(" CLK_RST = 0x%x\n\n", value);
@@ -870,7 +869,7 @@ static int cx25821_get_resources(struct cx25821_dev *dev)
 	     dev->name))
 		return 0;
 
-	printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n",
+	pr_err("%s: can't get MMIO memory @ 0x%llx\n",
 	       dev->name, (unsigned long long)pci_resource_start(dev->pci, 0));
 
 	return -EBUSY;
@@ -880,8 +879,8 @@ static void cx25821_dev_checkrevision(struct cx25821_dev *dev)
 {
 	dev->hwrevision = cx_read(RDR_CFG2) & 0xff;
 
-	printk(KERN_INFO "%s() Hardware revision = 0x%02x\n", __func__,
-	       dev->hwrevision);
+	pr_info("%s(): Hardware revision = 0x%02x\n",
+		__func__, dev->hwrevision);
 }
 
 static void cx25821_iounmap(struct cx25821_dev *dev)
@@ -901,9 +900,9 @@ static int cx25821_dev_setup(struct cx25821_dev *dev)
 {
 	int io_size = 0, i;
 
-	printk(KERN_INFO "\n***********************************\n");
-	printk(KERN_INFO "cx25821 set up\n");
-	printk(KERN_INFO "***********************************\n\n");
+	pr_info("\n***********************************\n");
+	pr_info("cx25821 set up\n");
+	pr_info("***********************************\n\n");
 
 	mutex_init(&dev->lock);
 
@@ -920,13 +919,11 @@ static int cx25821_dev_setup(struct cx25821_dev *dev)
 	strcpy(cx25821_boards[CX25821_BOARD].name, "cx25821");
 
 	if (dev->pci->device != 0x8210) {
-		printk(KERN_INFO
-		       "%s() Exiting. Incorrect Hardware device = 0x%02x\n",
-		       __func__, dev->pci->device);
+		pr_info("%s(): Exiting. Incorrect Hardware device = 0x%02x\n",
+			__func__, dev->pci->device);
 		return -1;
 	} else {
-		printk(KERN_INFO "Athena Hardware device = 0x%02x\n",
-		       dev->pci->device);
+		pr_info("Athena Hardware device = 0x%02x\n", dev->pci->device);
 	}
 
 	/* Apply a sensible clock frequency for the PCIe bridge */
@@ -956,8 +953,7 @@ static int cx25821_dev_setup(struct cx25821_dev *dev)
 	dev->i2c_bus[0].i2c_period = (0x07 << 24);	/* 1.95MHz */
 
 	if (cx25821_get_resources(dev) < 0) {
-		printk(KERN_ERR "%s No more PCIe resources for "
-		       "subsystem: %04x:%04x\n",
+		pr_err("%s: No more PCIe resources for subsystem: %04x:%04x\n",
 		       dev->name, dev->pci->subsystem_vendor,
 		       dev->pci->subsystem_device);
 
@@ -985,11 +981,11 @@ static int cx25821_dev_setup(struct cx25821_dev *dev)
 
 	dev->bmmio = (u8 __iomem *) dev->lmmio;
 
-	printk(KERN_INFO "%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
-	       dev->name, dev->pci->subsystem_vendor,
-	       dev->pci->subsystem_device, cx25821_boards[dev->board].name,
-	       dev->board, card[dev->nr] == dev->board ?
-	       "insmod option" : "autodetected");
+	pr_info("%s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n",
+		dev->name, dev->pci->subsystem_vendor,
+		dev->pci->subsystem_device, cx25821_boards[dev->board].name,
+		dev->board, card[dev->nr] == dev->board ?
+		"insmod option" : "autodetected");
 
 	/* init hardware */
 	cx25821_initialize(dev);
@@ -1004,8 +1000,7 @@ static int cx25821_dev_setup(struct cx25821_dev *dev)
 	cx25821_card_setup(dev);
 
 	if (medusa_video_init(dev) < 0)
-		CX25821_ERR("%s() Failed to initialize medusa!\n"
-		, __func__);
+		CX25821_ERR("%s(): Failed to initialize medusa!\n", __func__);
 
 	cx25821_video_register(dev);
 
@@ -1017,13 +1012,12 @@ static int cx25821_dev_setup(struct cx25821_dev *dev)
 	if (video_register_device
 	    (dev->ioctl_dev, VFL_TYPE_GRABBER, VIDEO_IOCTL_CH) < 0) {
 		cx25821_videoioctl_unregister(dev);
-		printk(KERN_ERR
-		   "%s() Failed to register video adapter for IOCTL, so \
-		   unregistering videoioctl device.\n", __func__);
+		pr_err("%s(): Failed to register video adapter for IOCTL, so unregistering videoioctl device\n",
+		       __func__);
 	}
 
 	cx25821_dev_checkrevision(dev);
-	CX25821_INFO("cx25821 setup done!\n");
+	CX25821_INFO("setup done!\n");
 
 	return 0;
 }
@@ -1362,20 +1356,20 @@ void cx25821_print_irqbits(char *name, char *tag, char **strings,
 {
 	unsigned int i;
 
-	printk(KERN_DEBUG "%s: %s [0x%x]", name, tag, bits);
+	printk(KERN_DEBUG pr_fmt("%s: %s [0x%x]"), name, tag, bits);
 
 	for (i = 0; i < len; i++) {
 		if (!(bits & (1 << i)))
 			continue;
 		if (strings[i])
-			printk(" %s", strings[i]);
+			pr_cont(" %s", strings[i]);
 		else
-			printk(" %d", i);
+			pr_cont(" %d", i);
 		if (!(mask & (1 << i)))
 			continue;
-		printk("*");
+		pr_cont("*");
 	}
-	printk("\n");
+	pr_cont("\n");
 }
 EXPORT_SYMBOL(cx25821_print_irqbits);
 
@@ -1405,12 +1399,12 @@ static int __devinit cx25821_initdev(struct pci_dev *pci_dev,
 	if (pci_enable_device(pci_dev)) {
 		err = -EIO;
 
-		printk(KERN_INFO "pci enable failed! ");
+		pr_info("pci enable failed!\n");
 
 		goto fail_unregister_device;
 	}
 
-	printk(KERN_INFO "cx25821 Athena pci enable !\n");
+	pr_info("Athena pci enable !\n");
 
 	err = cx25821_dev_setup(dev);
 	if (err) {
@@ -1423,14 +1417,13 @@ static int __devinit cx25821_initdev(struct pci_dev *pci_dev,
 	/* print pci info */
 	pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev);
 	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
-	printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
-	       "latency: %d, mmio: 0x%llx\n", dev->name,
-	       pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
-	       dev->pci_lat, (unsigned long long)dev->base_io_addr);
+	pr_info("%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+		dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+		dev->pci_lat, (unsigned long long)dev->base_io_addr);
 
 	pci_set_master(pci_dev);
 	if (!pci_dma_supported(pci_dev, 0xffffffff)) {
-		printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
+		pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
 		err = -EIO;
 		goto fail_irq;
 	}
@@ -1440,15 +1433,14 @@ static int __devinit cx25821_initdev(struct pci_dev *pci_dev,
 			dev->name, dev);
 
 	if (err < 0) {
-		printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name,
-		       pci_dev->irq);
+		pr_err("%s: can't get IRQ %d\n", dev->name, pci_dev->irq);
 		goto fail_irq;
 	}
 
 	return 0;
 
 fail_irq:
-	printk(KERN_INFO "cx25821 cx25821_initdev() can't get IRQ !\n");
+	pr_info("cx25821_initdev() can't get IRQ !\n");
 	cx25821_dev_unregister(dev);
 
 fail_unregister_pci:
@@ -1510,9 +1502,10 @@ static struct pci_driver cx25821_pci_driver = {
 static int __init cx25821_init(void)
 {
 	INIT_LIST_HEAD(&cx25821_devlist);
-	printk(KERN_INFO "cx25821 driver version %d.%d.%d loaded\n",
-	       (CX25821_VERSION_CODE >> 16) & 0xff,
-	       (CX25821_VERSION_CODE >> 8) & 0xff, CX25821_VERSION_CODE & 0xff);
+	pr_info("driver version %d.%d.%d loaded\n",
+		(CX25821_VERSION_CODE >> 16) & 0xff,
+		(CX25821_VERSION_CODE >> 8) & 0xff,
+		CX25821_VERSION_CODE & 0xff);
 	return pci_register_driver(&cx25821_pci_driver);
 }
 
diff --git a/drivers/staging/cx25821/cx25821-i2c.c b/drivers/staging/cx25821/cx25821-i2c.c
index 2b14bcca689..130dfebebe2 100644
--- a/drivers/staging/cx25821/cx25821-i2c.c
+++ b/drivers/staging/cx25821/cx25821-i2c.c
@@ -21,6 +21,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "cx25821.h"
 #include <linux/i2c.h>
 
@@ -32,10 +34,11 @@ static unsigned int i2c_scan;
 module_param(i2c_scan, int, 0444);
 MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
 
-#define dprintk(level, fmt, arg...)\
-	do { if (i2c_debug >= level)\
-		printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
-	} while (0)
+#define dprintk(level, fmt, arg...)					\
+do {									\
+	if (i2c_debug >= level)						\
+		printk(KERN_DEBUG "%s/0: " fmt, dev->name, ##arg);	\
+} while (0)
 
 #define I2C_WAIT_DELAY 32
 #define I2C_WAIT_RETRY 64
@@ -98,7 +101,7 @@ static int i2c_sendbytes(struct i2c_adapter *i2c_adap,
 		if (!i2c_slave_did_ack(i2c_adap))
 			return -EIO;
 
-		dprintk(1, "%s() returns 0\n", __func__);
+		dprintk(1, "%s(): returns 0\n", __func__);
 		return 0;
 	}
 
@@ -163,7 +166,7 @@ eio:
 	retval = -EIO;
 err:
 	if (i2c_debug)
-		printk(KERN_ERR " ERR: %d\n", retval);
+		pr_err(" ERR: %d\n", retval);
 	return retval;
 }
 
@@ -187,7 +190,7 @@ static int i2c_readbytes(struct i2c_adapter *i2c_adap,
 		if (!i2c_slave_did_ack(i2c_adap))
 			return -EIO;
 
-		dprintk(1, "%s() returns 0\n", __func__);
+		dprintk(1, "%s(): returns 0\n", __func__);
 		return 0;
 	}
 
@@ -227,7 +230,7 @@ eio:
 	retval = -EIO;
 err:
 	if (i2c_debug)
-		printk(KERN_ERR " ERR: %d\n", retval);
+		pr_err(" ERR: %d\n", retval);
 	return retval;
 }
 
diff --git a/drivers/staging/cx25821/cx25821-medusa-video.c b/drivers/staging/cx25821/cx25821-medusa-video.c
index 1e11e0ce2d0..fc780d0908d 100644
--- a/drivers/staging/cx25821/cx25821-medusa-video.c
+++ b/drivers/staging/cx25821/cx25821-medusa-video.c
@@ -20,6 +20,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "cx25821.h"
 #include "cx25821-medusa-video.h"
 #include "cx25821-biffuncs.h"
@@ -499,9 +501,8 @@ void medusa_set_resolution(struct cx25821_dev *dev, int width,
 
 	/* validate the width - cannot be negative */
 	if (width > MAX_WIDTH) {
-		printk
-		    ("cx25821 %s() : width %d > MAX_WIDTH %d ! resetting to MAX_WIDTH\n",
-		     __func__, width, MAX_WIDTH);
+		pr_info("%s(): width %d > MAX_WIDTH %d ! resetting to MAX_WIDTH\n",
+			__func__, width, MAX_WIDTH);
 		width = MAX_WIDTH;
 	}
 
diff --git a/drivers/staging/cx25821/cx25821-video-upstream-ch2.c b/drivers/staging/cx25821/cx25821-video-upstream-ch2.c
index 405e2db72b0..e2efacdfb87 100644
--- a/drivers/staging/cx25821/cx25821-video-upstream-ch2.c
+++ b/drivers/staging/cx25821/cx25821-video-upstream-ch2.c
@@ -20,6 +20,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "cx25821-video.h"
 #include "cx25821-video-upstream-ch2.h"
 
@@ -211,8 +213,7 @@ void cx25821_stop_upstream_video_ch2(struct cx25821_dev *dev)
 	u32 tmp = 0;
 
 	if (!dev->_is_running_ch2) {
-		printk
-		    ("cx25821: No video file is currently running so return!\n");
+		pr_info("No video file is currently running so return!\n");
 		return;
 	}
 	/* Disable RISC interrupts */
@@ -301,19 +302,19 @@ int cx25821_get_frame_ch2(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 	myfile = filp_open(dev->_filename_ch2, O_RDONLY | O_LARGEFILE, 0);
 	if (IS_ERR(myfile)) {
 		const int open_errno = -PTR_ERR(myfile);
-		printk("%s(): ERROR opening file(%s) with errno = %d!\n",
-			__func__, dev->_filename_ch2, open_errno);
+		pr_err("%s(): ERROR opening file(%s) with errno = %d!\n",
+		       __func__, dev->_filename_ch2, open_errno);
 		return PTR_ERR(myfile);
 	} else {
 		if (!(myfile->f_op)) {
-			printk("%s: File has no file operations registered!",
+			pr_err("%s(): File has no file operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
 
 		if (!myfile->f_op->read) {
-			printk("%s: File has no READ operations registered!",
+			pr_err("%s(): File has no READ operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
@@ -340,9 +341,8 @@ int cx25821_get_frame_ch2(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 			frame_offset += vfs_read_retval;
 
 			if (vfs_read_retval < line_size) {
-				printk(KERN_INFO
-				       "Done: exit %s() since no more bytes to read from Video file.\n",
-				       __func__);
+				pr_info("Done: exit %s() since no more bytes to read from Video file\n",
+					__func__);
 				break;
 			}
 		}
@@ -366,8 +366,8 @@ static void cx25821_vidups_handler_ch2(struct work_struct *work)
 	    container_of(work, struct cx25821_dev, _irq_work_entry_ch2);
 
 	if (!dev) {
-		printk("ERROR %s(): since container_of(work_struct) FAILED!\n",
-			__func__);
+		pr_err("ERROR %s(): since container_of(work_struct) FAILED!\n",
+		       __func__);
 		return;
 	}
 
@@ -393,21 +393,20 @@ int cx25821_openfile_ch2(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 
 	if (IS_ERR(myfile)) {
 		const int open_errno = -PTR_ERR(myfile);
-		printk("%s(): ERROR opening file(%s) with errno = %d!\n",
-			__func__, dev->_filename_ch2, open_errno);
+		pr_err("%s(): ERROR opening file(%s) with errno = %d!\n",
+		       __func__, dev->_filename_ch2, open_errno);
 		return PTR_ERR(myfile);
 	} else {
 		if (!(myfile->f_op)) {
-			printk("%s: File has no file operations registered!",
+			pr_err("%s(): File has no file operations registered!\n",
 			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
 
 		if (!myfile->f_op->read) {
-			printk
-			    ("%s: File has no READ operations registered!  Returning.",
-			     __func__);
+			pr_err("%s(): File has no READ operations registered!  Returning\n",
+			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
@@ -435,9 +434,8 @@ int cx25821_openfile_ch2(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 				offset += vfs_read_retval;
 
 				if (vfs_read_retval < line_size) {
-					printk(KERN_INFO
-					       "Done: exit %s() since no more bytes to read from Video file.\n",
-					       __func__);
+					pr_info("Done: exit %s() since no more bytes to read from Video file\n",
+						__func__);
 					break;
 				}
 			}
@@ -483,8 +481,7 @@ static int cx25821_upstream_buffer_prepare_ch2(struct cx25821_dev *dev,
 	dev->_risc_size_ch2 = dev->upstream_riscbuf_size_ch2;
 
 	if (!dev->_dma_virt_addr_ch2) {
-		printk
-		    ("cx25821: FAILED to allocate memory for Risc buffer! Returning.\n");
+		pr_err("FAILED to allocate memory for Risc buffer! Returning\n");
 		return -ENOMEM;
 	}
 
@@ -504,8 +501,7 @@ static int cx25821_upstream_buffer_prepare_ch2(struct cx25821_dev *dev,
 	dev->_data_buf_size_ch2 = dev->upstream_databuf_size_ch2;
 
 	if (!dev->_data_buf_virt_addr_ch2) {
-		printk
-		    ("cx25821: FAILED to allocate memory for data buffer! Returning.\n");
+		pr_err("FAILED to allocate memory for data buffer! Returning\n");
 		return -ENOMEM;
 	}
 
@@ -521,8 +517,7 @@ static int cx25821_upstream_buffer_prepare_ch2(struct cx25821_dev *dev,
 	    cx25821_risc_buffer_upstream_ch2(dev, dev->pci, 0, bpl,
 					     dev->_lines_count_ch2);
 	if (ret < 0) {
-		printk(KERN_INFO
-			"cx25821: Failed creating Video Upstream Risc programs!\n");
+		pr_info("Failed creating Video Upstream Risc programs!\n");
 		goto error;
 	}
 
@@ -602,8 +597,8 @@ int cx25821_video_upstream_irq_ch2(struct cx25821_dev *dev, int chan_num,
 	}
 
 	if (dev->_file_status_ch2 == END_OF_FILE) {
-		printk("cx25821: EOF Channel 2 Framecount = %d\n",
-		       dev->_frame_count_ch2);
+		pr_info("EOF Channel 2 Framecount = %d\n",
+			dev->_frame_count_ch2);
 		return -1;
 	}
 	/* ElSE, set the interrupt mask register, re-enable irq. */
@@ -714,8 +709,8 @@ int cx25821_start_video_dma_upstream_ch2(struct cx25821_dev *dev,
 	    request_irq(dev->pci->irq, cx25821_upstream_irq_ch2,
 			IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
 	if (err < 0) {
-		printk(KERN_ERR "%s: can't get upstream IRQ %d\n", dev->name,
-		       dev->pci->irq);
+		pr_err("%s: can't get upstream IRQ %d\n",
+		       dev->name, dev->pci->irq);
 		goto fail_irq;
 	}
 	/* Start the DMA  engine */
@@ -744,7 +739,7 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
 	int str_length = 0;
 
 	if (dev->_is_running_ch2) {
-		printk("Video Channel is still running so return!\n");
+		pr_info("Video Channel is still running so return!\n");
 		return 0;
 	}
 
@@ -756,8 +751,7 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
 	    create_singlethread_workqueue("cx25821_workqueue2");
 
 	if (!dev->_irq_queues_ch2) {
-		printk
-		    ("cx25821: create_singlethread_workqueue() for Video FAILED!\n");
+		pr_err("create_singlethread_workqueue() for Video FAILED!\n");
 		return -ENOMEM;
 	}
 	/*
@@ -829,8 +823,7 @@ int cx25821_vidupstream_init_ch2(struct cx25821_dev *dev, int channel_select,
 	    cx25821_upstream_buffer_prepare_ch2(dev, sram_ch,
 						dev->_line_size_ch2);
 	if (retval < 0) {
-		printk(KERN_ERR
-		       "%s: Failed to set up Video upstream buffers!\n",
+		pr_err("%s: Failed to set up Video upstream buffers!\n",
 		       dev->name);
 		goto error;
 	}
diff --git a/drivers/staging/cx25821/cx25821-video-upstream.c b/drivers/staging/cx25821/cx25821-video-upstream.c
index 16bf74d6591..31b4e3c74c8 100644
--- a/drivers/staging/cx25821/cx25821-video-upstream.c
+++ b/drivers/staging/cx25821/cx25821-video-upstream.c
@@ -20,6 +20,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "cx25821-video.h"
 #include "cx25821-video-upstream.h"
 
@@ -257,8 +259,7 @@ void cx25821_stop_upstream_video_ch1(struct cx25821_dev *dev)
 	u32 tmp = 0;
 
 	if (!dev->_is_running) {
-		printk
-		   (KERN_INFO "cx25821: No video file is currently running so return!\n");
+		pr_info("No video file is currently running so return!\n");
 		return;
 	}
 	/* Disable RISC interrupts */
@@ -346,23 +347,20 @@ int cx25821_get_frame(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 
 	if (IS_ERR(myfile)) {
 		const int open_errno = -PTR_ERR(myfile);
-		printk(KERN_ERR
-		   "%s(): ERROR opening file(%s) with errno = %d!\n",
-		   __func__, dev->_filename, open_errno);
+		pr_err("%s(): ERROR opening file(%s) with errno = %d!\n",
+		       __func__, dev->_filename, open_errno);
 		return PTR_ERR(myfile);
 	} else {
 		if (!(myfile->f_op)) {
-			printk(KERN_ERR
-			   "%s: File has no file operations registered!",
-			   __func__);
+			pr_err("%s(): File has no file operations registered!\n",
+			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
 
 		if (!myfile->f_op->read) {
-			printk(KERN_ERR
-			   "%s: File has no READ operations registered!",
-			   __func__);
+			pr_err("%s(): File has no READ operations registered!\n",
+			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
@@ -388,10 +386,8 @@ int cx25821_get_frame(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 			frame_offset += vfs_read_retval;
 
 			if (vfs_read_retval < line_size) {
-				printk(KERN_INFO
-				      "Done: exit %s() since no more bytes to \
-				      read from Video file.\n",
-				       __func__);
+				pr_info("Done: exit %s() since no more bytes to read from Video file\n",
+					__func__);
 				break;
 			}
 		}
@@ -415,9 +411,8 @@ static void cx25821_vidups_handler(struct work_struct *work)
 	    container_of(work, struct cx25821_dev, _irq_work_entry);
 
 	if (!dev) {
-		printk(KERN_ERR
-		   "ERROR %s(): since container_of(work_struct) FAILED!\n",
-		   __func__);
+		pr_err("ERROR %s(): since container_of(work_struct) FAILED!\n",
+		       __func__);
 		return;
 	}
 
@@ -443,23 +438,20 @@ int cx25821_openfile(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 
 	if (IS_ERR(myfile)) {
 		const int open_errno = -PTR_ERR(myfile);
-	       printk(KERN_ERR  "%s(): ERROR opening file(%s) with errno = %d!\n",
+		pr_err("%s(): ERROR opening file(%s) with errno = %d!\n",
 		       __func__, dev->_filename, open_errno);
 		return PTR_ERR(myfile);
 	} else {
 		if (!(myfile->f_op)) {
-			printk(KERN_ERR
-			   "%s: File has no file operations registered!",
-			   __func__);
+			pr_err("%s(): File has no file operations registered!\n",
+			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
 
 		if (!myfile->f_op->read) {
-			printk(KERN_ERR
-			   "%s: File has no READ operations registered!  \
-			   Returning.",
-			     __func__);
+			pr_err("%s(): File has no READ operations registered!  Returning\n",
+			       __func__);
 			filp_close(myfile, NULL);
 			return -EIO;
 		}
@@ -487,10 +479,8 @@ int cx25821_openfile(struct cx25821_dev *dev, struct sram_channel *sram_ch)
 				offset += vfs_read_retval;
 
 				if (vfs_read_retval < line_size) {
-					printk(KERN_INFO
-					    "Done: exit %s() since no more \
-					    bytes to read from Video file.\n",
-					       __func__);
+					pr_info("Done: exit %s() since no more bytes to read from Video file\n",
+						__func__);
 					break;
 				}
 			}
@@ -534,9 +524,7 @@ int cx25821_upstream_buffer_prepare(struct cx25821_dev *dev,
 	dev->_risc_size = dev->upstream_riscbuf_size;
 
 	if (!dev->_dma_virt_addr) {
-		printk
-		   (KERN_ERR "cx25821: FAILED to allocate memory for Risc \
-		   buffer! Returning.\n");
+		pr_err("FAILED to allocate memory for Risc buffer! Returning\n");
 		return -ENOMEM;
 	}
 
@@ -556,9 +544,7 @@ int cx25821_upstream_buffer_prepare(struct cx25821_dev *dev,
 	dev->_data_buf_size = dev->upstream_databuf_size;
 
 	if (!dev->_data_buf_virt_addr) {
-		printk
-		   (KERN_ERR "cx25821: FAILED to allocate memory for data \
-		   buffer! Returning.\n");
+		pr_err("FAILED to allocate memory for data buffer! Returning\n");
 		return -ENOMEM;
 	}
 
@@ -574,8 +560,7 @@ int cx25821_upstream_buffer_prepare(struct cx25821_dev *dev,
 	    cx25821_risc_buffer_upstream(dev, dev->pci, 0, bpl,
 					 dev->_lines_count);
 	if (ret < 0) {
-		printk(KERN_INFO
-		    "cx25821: Failed creating Video Upstream Risc programs!\n");
+		pr_info("Failed creating Video Upstream Risc programs!\n");
 		goto error;
 	}
 
@@ -652,22 +637,20 @@ int cx25821_video_upstream_irq(struct cx25821_dev *dev, int chan_num,
 		spin_unlock(&dev->slock);
 	} else {
 		if (status & FLD_VID_SRC_UF)
-			printk
-			   (KERN_ERR "%s: Video Received Underflow Error \
-			   Interrupt!\n", __func__);
+			pr_err("%s(): Video Received Underflow Error Interrupt!\n",
+			       __func__);
 
 		if (status & FLD_VID_SRC_SYNC)
-			printk(KERN_ERR "%s: Video Received Sync Error \
-				Interrupt!\n", __func__);
+			pr_err("%s(): Video Received Sync Error Interrupt!\n",
+			       __func__);
 
 		if (status & FLD_VID_SRC_OPC_ERR)
-			printk(KERN_ERR "%s: Video Received OpCode Error \
-				Interrupt!\n", __func__);
+			pr_err("%s(): Video Received OpCode Error Interrupt!\n",
+			       __func__);
 	}
 
 	if (dev->_file_status == END_OF_FILE) {
-		printk(KERN_ERR "cx25821: EOF Channel 1 Framecount = %d\n",
-		       dev->_frame_count);
+		pr_err("EOF Channel 1 Framecount = %d\n", dev->_frame_count);
 		return -1;
 	}
 	/* ElSE, set the interrupt mask register, re-enable irq. */
@@ -775,8 +758,8 @@ int cx25821_start_video_dma_upstream(struct cx25821_dev *dev,
 	    request_irq(dev->pci->irq, cx25821_upstream_irq,
 			IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
 	if (err < 0) {
-		printk(KERN_ERR "%s: can't get upstream IRQ %d\n", dev->name,
-		       dev->pci->irq);
+		pr_err("%s: can't get upstream IRQ %d\n",
+		       dev->name, dev->pci->irq);
 		goto fail_irq;
 	}
 
@@ -806,7 +789,7 @@ int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select,
 	int str_length = 0;
 
 	if (dev->_is_running) {
-		printk(KERN_INFO "Video Channel is still running so return!\n");
+		pr_info("Video Channel is still running so return!\n");
 		return 0;
 	}
 
@@ -817,9 +800,7 @@ int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select,
 	dev->_irq_queues = create_singlethread_workqueue("cx25821_workqueue");
 
 	if (!dev->_irq_queues) {
-		printk
-		   (KERN_ERR "cx25821: create_singlethread_workqueue() for \
-		   Video FAILED!\n");
+		pr_err("create_singlethread_workqueue() for Video FAILED!\n");
 		return -ENOMEM;
 	}
 	/* 656/VIP SRC Upstream Channel I & J and 7 - Host Bus Interface for
@@ -895,8 +876,7 @@ int cx25821_vidupstream_init_ch1(struct cx25821_dev *dev, int channel_select,
 	/* Allocating buffers and prepare RISC program */
 	retval = cx25821_upstream_buffer_prepare(dev, sram_ch, dev->_line_size);
 	if (retval < 0) {
-		printk(KERN_ERR
-		       "%s: Failed to set up Video upstream buffers!\n",
+		pr_err("%s: Failed to set up Video upstream buffers!\n",
 		       dev->name);
 		goto error;
 	}
diff --git a/drivers/staging/cx25821/cx25821-video.c b/drivers/staging/cx25821/cx25821-video.c
index e7f1d5778ce..0d8d7567051 100644
--- a/drivers/staging/cx25821/cx25821-video.c
+++ b/drivers/staging/cx25821/cx25821-video.c
@@ -24,7 +24,10 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include "cx25821-video.h"
+#include <linux/smp_lock.h>
 
 MODULE_DESCRIPTION("v4l2 driver module for cx25821 based TV cards");
 MODULE_AUTHOR("Hiep Huynh <hiep.huynh@conexant.com>");
@@ -92,7 +95,7 @@ int cx25821_get_format_size(void)
 	return ARRAY_SIZE(formats);
 }
 
-struct cx25821_fmt *format_by_fourcc(unsigned int fourcc)
+struct cx25821_fmt *cx25821_format_by_fourcc(unsigned int fourcc)
 {
 	unsigned int i;
 
@@ -104,7 +107,7 @@ struct cx25821_fmt *format_by_fourcc(unsigned int fourcc)
 		if (formats[i].fourcc == fourcc)
 			return formats + i;
 
-	printk(KERN_ERR "%s(0x%08x) NOT FOUND\n", __func__, fourcc);
+	pr_err("%s(0x%08x) NOT FOUND\n", __func__, fourcc);
 	return NULL;
 }
 
@@ -159,15 +162,15 @@ void cx25821_video_wakeup(struct cx25821_dev *dev, struct cx25821_dmaqueue *q,
 	else
 		mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT);
 	if (bc != 1)
-		printk(KERN_ERR "%s: %d buffers handled (should be 1)\n",
+		pr_err("%s: %d buffers handled (should be 1)\n",
 		       __func__, bc);
 }
 
 #ifdef TUNER_FLAG
 int cx25821_set_tvnorm(struct cx25821_dev *dev, v4l2_std_id norm)
 {
-	dprintk(1, "%s(norm = 0x%08x) name: [%s]\n", __func__,
-		(unsigned int)norm, v4l2_norm_to_name(norm));
+	dprintk(1, "%s(norm = 0x%08x) name: [%s]\n",
+		__func__, (unsigned int)norm, v4l2_norm_to_name(norm));
 
 	dev->tvnorm = norm;
 
@@ -267,7 +270,7 @@ int cx25821_video_mux(struct cx25821_dev *dev, unsigned int input)
 	struct v4l2_routing route;
 	memset(&route, 0, sizeof(route));
 
-	dprintk(1, "%s() video_mux: %d [vmux=%d, gpio=0x%x,0x%x,0x%x,0x%x]\n",
+	dprintk(1, "%s(): video_mux: %d [vmux=%d, gpio=0x%x,0x%x,0x%x,0x%x]\n",
 		__func__, input, INPUT(input)->vmux, INPUT(input)->gpio0,
 		INPUT(input)->gpio1, INPUT(input)->gpio2, INPUT(input)->gpio3);
 	dev->input = input;
@@ -400,8 +403,8 @@ int cx25821_video_irq(struct cx25821_dev *dev, int chan_num, u32 status)
 
 	/* risc op code error */
 	if (status & (1 << 16)) {
-		printk(KERN_WARNING "%s, %s: video risc op code error\n",
-		       dev->name, channel->name);
+		pr_warn("%s, %s: video risc op code error\n",
+			dev->name, channel->name);
 		cx_clear(channel->dma_ctl, 0x11);
 		cx25821_sram_channel_dump(dev, channel);
 	}
@@ -458,7 +461,7 @@ void cx25821_video_unregister(struct cx25821_dev *dev, int chan_num)
 	       btcx_riscmem_free(dev->pci,
 		       &dev->channels[chan_num].vidq.stopper);
 
-		printk(KERN_WARNING "device %d released!\n", chan_num);
+		pr_warn("device %d released!\n", chan_num);
 	}
 
 }
@@ -590,7 +593,7 @@ int cx25821_buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
 		init_buffer = 1;
 		rc = videobuf_iolock(q, &buf->vb, NULL);
 		if (0 != rc) {
-			printk(KERN_DEBUG "videobuf_iolock failed!\n");
+			printk(KERN_DEBUG pr_fmt("videobuf_iolock failed!\n"));
 			goto fail;
 		}
 	}
@@ -848,7 +851,7 @@ static int video_open(struct file *file)
        pix_format =
 	   (dev->channels[ch_id].pixel_formats ==
 	    PIXEL_FRMT_411) ? V4L2_PIX_FMT_Y41P : V4L2_PIX_FMT_YUYV;
-       fh->fmt = format_by_fourcc(pix_format);
+       fh->fmt = cx25821_format_by_fourcc(pix_format);
 
        v4l2_prio_open(&dev->channels[ch_id].prio, &fh->prio);
 
@@ -1010,7 +1013,7 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
        if (0 != err)
 	       return err;
 
-       fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+       fh->fmt = cx25821_format_by_fourcc(f->fmt.pix.pixelformat);
        fh->vidq.field = f->fmt.pix.field;
 
        /* check if width and height is valid based on set standard */
@@ -1038,8 +1041,8 @@ static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
        dev->channels[fh->channel_id].cif_width = fh->width;
        medusa_set_resolution(dev, fh->width, SRAM_CH00);
 
-       dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, fh->width,
-	       fh->height, fh->vidq.field);
+	dprintk(2, "%s(): width=%d height=%d field=%d\n", __func__, fh->width,
+		fh->height, fh->vidq.field);
 	v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED);
 	cx25821_call_all(dev, video, s_mbus_fmt, &mbus_fmt);
 
@@ -1070,14 +1073,14 @@ static int vidioc_log_status(struct file *file, void *priv)
        u32 tmp = 0;
 
        snprintf(name, sizeof(name), "%s/2", dev->name);
-       printk(KERN_INFO "%s/2: ============  START LOG STATUS  ============\n",
-	      dev->name);
+	pr_info("%s/2: ============  START LOG STATUS  ============\n",
+		dev->name);
        cx25821_call_all(dev, core, log_status);
        tmp = cx_read(sram_ch->dma_ctl);
-       printk(KERN_INFO "Video input 0 is %s\n",
-	      (tmp & 0x11) ? "streaming" : "stopped");
-       printk(KERN_INFO "%s/2: =============  END LOG STATUS  =============\n",
-	      dev->name);
+	pr_info("Video input 0 is %s\n",
+		(tmp & 0x11) ? "streaming" : "stopped");
+	pr_info("%s/2: =============  END LOG STATUS  =============\n",
+		dev->name);
        return 0;
 }
 
@@ -1119,7 +1122,7 @@ int cx25821_vidioc_try_fmt_vid_cap(struct file *file, void *priv, struct v4l2_fo
 	enum v4l2_field field;
 	unsigned int maxw, maxh;
 
-	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+	fmt = cx25821_format_by_fourcc(f->fmt.pix.pixelformat);
 	if (NULL == fmt)
 		return -EINVAL;
 
@@ -1186,34 +1189,6 @@ int cx25821_vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
 	return 0;
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-int cx25821_vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct cx25821_fh *fh = priv;
-	struct videobuf_queue *q;
-	struct v4l2_requestbuffers req;
-	unsigned int i;
-	int err;
-
-	q = get_queue(fh);
-	memset(&req, 0, sizeof(req));
-	req.type = q->type;
-	req.count = 8;
-	req.memory = V4L2_MEMORY_MMAP;
-	err = videobuf_reqbufs(q, &req);
-	if (err < 0)
-		return err;
-
-	mbuf->frames = req.count;
-	mbuf->size = 0;
-	for (i = 0; i < mbuf->frames; i++) {
-		mbuf->offsets[i] = q->bufs[i]->boff;
-		mbuf->size += q->bufs[i]->bsize;
-	}
-	return 0;
-}
-#endif
-
 int cx25821_vidioc_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p)
 {
 	struct cx25821_fh *fh = priv;
@@ -1298,8 +1273,6 @@ int cx25821_enum_input(struct cx25821_dev *dev, struct v4l2_input *i)
 	if (0 == INPUT(n)->type)
 		return -EINVAL;
 
-	memset(i, 0, sizeof(*i));
-	i->index = n;
 	i->type = V4L2_INPUT_TYPE_CAMERA;
 	strcpy(i->name, iname[INPUT(n)->type]);
 
@@ -1319,7 +1292,7 @@ int cx25821_vidioc_g_input(struct file *file, void *priv, unsigned int *i)
 	struct cx25821_dev *dev = ((struct cx25821_fh *)priv)->dev;
 
 	*i = dev->input;
-	dprintk(1, "%s() returns %d\n", __func__, *i);
+	dprintk(1, "%s(): returns %d\n", __func__, *i);
 	return 0;
 }
 
@@ -1339,7 +1312,7 @@ int cx25821_vidioc_s_input(struct file *file, void *priv, unsigned int i)
 	}
 
 	if (i > 2) {
-		dprintk(1, "%s() -EINVAL\n", __func__);
+		dprintk(1, "%s(): -EINVAL\n", __func__);
 		return -EINVAL;
 	}
 
@@ -1390,7 +1363,7 @@ int cx25821_vidioc_s_frequency(struct file *file, void *priv, struct v4l2_freque
 		if (0 != err)
 			return err;
        } else {
-	       printk(KERN_ERR "Invalid fh pointer!\n");
+	       pr_err("Invalid fh pointer!\n");
 	       return -EINVAL;
 	}
 
@@ -1733,12 +1706,10 @@ static long video_ioctl_upstream9(struct file *file, unsigned int cmd,
 
        data_from_user = (struct upstream_user_struct *)arg;
 
-       if (!data_from_user) {
-	       printk
-		   ("cx25821 in %s(): Upstream data is INVALID. Returning.\n",
-		    __func__);
-	       return 0;
-       }
+	if (!data_from_user) {
+		pr_err("%s(): Upstream data is INVALID. Returning\n", __func__);
+		return 0;
+	}
 
        command = data_from_user->command;
 
@@ -1776,12 +1747,10 @@ static long video_ioctl_upstream10(struct file *file, unsigned int cmd,
 
        data_from_user = (struct upstream_user_struct *)arg;
 
-       if (!data_from_user) {
-	       printk
-		   ("cx25821 in %s(): Upstream data is INVALID. Returning.\n",
-		    __func__);
-	       return 0;
-       }
+	if (!data_from_user) {
+		pr_err("%s(): Upstream data is INVALID. Returning\n", __func__);
+		return 0;
+	}
 
        command = data_from_user->command;
 
@@ -1819,12 +1788,10 @@ static long video_ioctl_upstream11(struct file *file, unsigned int cmd,
 
        data_from_user = (struct upstream_user_struct *)arg;
 
-       if (!data_from_user) {
-	       printk
-		   ("cx25821 in %s(): Upstream data is INVALID. Returning.\n",
-		    __func__);
-	       return 0;
-       }
+	if (!data_from_user) {
+		pr_err("%s(): Upstream data is INVALID. Returning\n", __func__);
+		return 0;
+	}
 
        command = data_from_user->command;
 
@@ -1866,12 +1833,10 @@ static long video_ioctl_set(struct file *file, unsigned int cmd,
 
        data_from_user = (struct downstream_user_struct *)arg;
 
-       if (!data_from_user) {
-	       printk(
-	       "cx25821 in %s(): User data is INVALID. Returning.\n",
-	       __func__);
-	       return 0;
-       }
+	if (!data_from_user) {
+		pr_err("%s(): User data is INVALID. Returning\n", __func__);
+		return 0;
+	}
 
        command = data_from_user->command;
 
@@ -2022,9 +1987,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
        .vidioc_log_status = vidioc_log_status,
        .vidioc_g_priority = cx25821_vidioc_g_priority,
        .vidioc_s_priority = cx25821_vidioc_s_priority,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-       .vidiocgmbuf = cx25821_vidiocgmbuf,
-#endif
 #ifdef TUNER_FLAG
        .vidioc_g_tuner = cx25821_vidioc_g_tuner,
        .vidioc_s_tuner = cx25821_vidioc_s_tuner,
diff --git a/drivers/staging/cx25821/cx25821-video.h b/drivers/staging/cx25821/cx25821-video.h
index cc6034b1a95..f4ee8051b8b 100644
--- a/drivers/staging/cx25821/cx25821-video.h
+++ b/drivers/staging/cx25821/cx25821-video.h
@@ -40,19 +40,15 @@
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-/* Include V4L1 specific functions. Should be removed soon */
-#include <linux/videodev.h>
-#endif
-
 #define TUNER_FLAG
 
 #define VIDEO_DEBUG 0
 
-#define dprintk(level, fmt, arg...)\
-    do { if (VIDEO_DEBUG >= level)\
-	printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\
-    } while (0)
+#define dprintk(level, fmt, arg...)					\
+do {									\
+	if (VIDEO_DEBUG >= level)					\
+		printk(KERN_DEBUG "%s/0: " fmt, dev->name, ##arg);	\
+} while (0)
 
 /* For IOCTL to identify running upstream */
 #define UPSTREAM_START_VIDEO        700
@@ -87,7 +83,7 @@ extern unsigned int vid_limit;
 
 #define FORMAT_FLAGS_PACKED       0x01
 extern struct cx25821_fmt formats[];
-extern struct cx25821_fmt *format_by_fourcc(unsigned int fourcc);
+extern struct cx25821_fmt *cx25821_format_by_fourcc(unsigned int fourcc);
 extern struct cx25821_data timeout_data[MAX_VID_CHANNEL_NUM];
 
 extern void cx25821_dump_video_queue(struct cx25821_dev *dev,
@@ -133,7 +129,6 @@ extern int cx25821_vidioc_querycap(struct file *file, void *priv,
 			   struct v4l2_capability *cap);
 extern int cx25821_vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
 				   struct v4l2_fmtdesc *f);
-extern int cx25821_vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf);
 extern int cx25821_vidioc_reqbufs(struct file *file, void *priv,
 			  struct v4l2_requestbuffers *p);
 extern int cx25821_vidioc_querybuf(struct file *file, void *priv,
diff --git a/drivers/staging/cx25821/cx25821.h b/drivers/staging/cx25821/cx25821.h
index c9400012578..55115235f7f 100644
--- a/drivers/staging/cx25821/cx25821.h
+++ b/drivers/staging/cx25821/cx25821.h
@@ -519,9 +519,12 @@ extern struct sram_channel cx25821_sram_channels[];
 #define Set_GPIO_Bit(Bit)                       (1 << Bit)
 #define Clear_GPIO_Bit(Bit)                     (~(1 << Bit))
 
-#define CX25821_ERR(fmt, args...)      printk(KERN_ERR  "cx25821(%d): " fmt, dev->board, ## args)
-#define CX25821_WARN(fmt, args...)     printk(KERN_WARNING "cx25821(%d): " fmt, dev->board , ## args)
-#define CX25821_INFO(fmt, args...)     printk(KERN_INFO "cx25821(%d): " fmt, dev->board , ## args)
+#define CX25821_ERR(fmt, args...)			\
+	pr_err("(%d): " fmt, dev->board, ##args)
+#define CX25821_WARN(fmt, args...)			\
+	pr_warn("(%d): " fmt, dev->board, ##args)
+#define CX25821_INFO(fmt, args...)			\
+	pr_info("(%d): " fmt, dev->board, ##args)
 
 extern int cx25821_i2c_register(struct cx25821_i2c *bus);
 extern void cx25821_card_setup(struct cx25821_dev *dev);
diff --git a/drivers/staging/dabusb/Kconfig b/drivers/staging/dabusb/Kconfig
new file mode 100644
index 00000000000..87bdc425d3c
--- /dev/null
+++ b/drivers/staging/dabusb/Kconfig
@@ -0,0 +1,14 @@
+config USB_DABUSB
+	tristate "DABUSB driver"
+	depends on USB
+	---help---
+	  A Digital Audio Broadcasting (DAB) Receiver for USB and Linux
+	  brought to you by the DAB-Team
+	  <http://wwwbode.cs.tum.edu/Par/arch/dab/>.  This driver can be taken
+	  as an example for URB-based bulk, control, and isochronous
+	  transactions. URB's are explained in
+	  <Documentation/usb/URB.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dabusb.
+
diff --git a/drivers/staging/dabusb/Makefile b/drivers/staging/dabusb/Makefile
new file mode 100644
index 00000000000..2ff2f228e5f
--- /dev/null
+++ b/drivers/staging/dabusb/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_USB_DABUSB)        += dabusb.o
+
diff --git a/drivers/staging/dabusb/TODO b/drivers/staging/dabusb/TODO
new file mode 100644
index 00000000000..f9c0314ea0c
--- /dev/null
+++ b/drivers/staging/dabusb/TODO
@@ -0,0 +1,5 @@
+This is a driver for an experimental sample developed in 2003. The driver
+never supported any commercial product, nor had any known user.
+If nobody takes care on it, the driver will be removed for 2.6.39.
+
+Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/media/video/dabusb.c b/drivers/staging/dabusb/dabusb.c
index f3e25e91366..f3e25e91366 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/staging/dabusb/dabusb.c
diff --git a/drivers/media/video/dabusb.h b/drivers/staging/dabusb/dabusb.h
index 00eb34c863e..00eb34c863e 100644
--- a/drivers/media/video/dabusb.h
+++ b/drivers/staging/dabusb/dabusb.h
diff --git a/drivers/staging/dt3155v4l/dt3155v4l.c b/drivers/staging/dt3155v4l/dt3155v4l.c
index b996697e7eb..15d7efeed29 100644
--- a/drivers/staging/dt3155v4l/dt3155v4l.c
+++ b/drivers/staging/dt3155v4l/dt3155v4l.c
@@ -876,9 +876,6 @@ static const struct v4l2_ioctl_ops dt3155_ioctl_ops = {
 	.vidioc_s_crop = dt3155_ioc_s_crop,
 	.vidioc_enum_framesizes = dt3155_ioc_enum_framesizes,
 	.vidioc_enum_frameintervals = dt3155_ioc_enum_frameintervals,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf = iocgmbuf,
-#endif
 */
 };
 
diff --git a/drivers/staging/easycap/easycap.h b/drivers/staging/easycap/easycap.h
index f3c827eb0ab..884263b2775 100644
--- a/drivers/staging/easycap/easycap.h
+++ b/drivers/staging/easycap/easycap.h
@@ -75,9 +75,9 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/smp_lock.h>
 #include <linux/module.h>
 #include <linux/kref.h>
-#include <linux/smp_lock.h>
 #include <linux/usb.h>
 #include <linux/uaccess.h>
 
diff --git a/drivers/staging/frontier/tranzport.c b/drivers/staging/frontier/tranzport.c
index a145a15cfdb..8894ab14f16 100644
--- a/drivers/staging/frontier/tranzport.c
+++ b/drivers/staging/frontier/tranzport.c
@@ -204,7 +204,7 @@ static void usb_tranzport_abort_transfers(struct usb_tranzport *dev)
 		t->value = temp;	\
 		return count;	\
 	}	\
-	static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+	static DEVICE_ATTR(value, S_IWUSR | S_IRUGO, show_##value, set_##value);
 
 show_int(enable);
 show_int(offline);
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c b/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c
index 87a6487531c..20d509836d9 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c
@@ -286,7 +286,6 @@ int ft1000_CreateDevice(struct ft1000_device *dev)
     pid = kernel_thread (exec_mknod, (void *)info, 0);
 
     // initialize application information
-    info->appcnt = 0;
 
 //    if (ft1000_flarion_cnt == 0) {
 //
diff --git a/drivers/staging/go7007/Kconfig b/drivers/staging/go7007/Kconfig
index 3aecd30f0d1..1da57df5cbc 100644
--- a/drivers/staging/go7007/Kconfig
+++ b/drivers/staging/go7007/Kconfig
@@ -1,10 +1,10 @@
 config VIDEO_GO7007
 	tristate "WIS GO7007 MPEG encoder support"
-	depends on VIDEO_DEV && PCI && I2C && INPUT
+	depends on VIDEO_DEV && PCI && I2C
 	depends on BKL # please fix
 	depends on SND
 	select VIDEOBUF_DMA_SG
-	depends on VIDEO_IR
+	depends on RC_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select SND_PCM
diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c
index b3f42f37a31..48d4e483d8a 100644
--- a/drivers/staging/go7007/go7007-driver.c
+++ b/drivers/staging/go7007/go7007-driver.c
@@ -199,7 +199,7 @@ static int init_i2c_module(struct i2c_adapter *adapter, const char *type,
 	struct go7007 *go = i2c_get_adapdata(adapter);
 	struct v4l2_device *v4l2_dev = &go->v4l2_dev;
 
-	if (v4l2_i2c_new_subdev(v4l2_dev, adapter, NULL, type, addr, NULL))
+	if (v4l2_i2c_new_subdev(v4l2_dev, adapter, type, addr, NULL))
 		return 0;
 
 	printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", type);
diff --git a/drivers/staging/hv/hv_utils.c b/drivers/staging/hv/hv_utils.c
index 702a478d554..a99e900ec4c 100644
--- a/drivers/staging/hv/hv_utils.c
+++ b/drivers/staging/hv/hv_utils.c
@@ -212,9 +212,6 @@ static void heartbeat_onchannelcallback(void *context)
 			   recvlen, requestid);
 
 		icmsghdrp = (struct icmsg_hdr *)&buf[
-			sizeof(struct vmbuspipe_hdr)];
-
-		icmsghdrp = (struct icmsg_hdr *)&buf[
 				sizeof(struct vmbuspipe_hdr)];
 
 		if (icmsghdrp->icmsgtype == ICMSGTYPE_NEGOTIATE) {
diff --git a/drivers/staging/hv/storvsc_drv.c b/drivers/staging/hv/storvsc_drv.c
index 41d9acf4cd6..6f8d67d0d64 100644
--- a/drivers/staging/hv/storvsc_drv.c
+++ b/drivers/staging/hv/storvsc_drv.c
@@ -72,8 +72,7 @@ struct storvsc_driver_context {
 
 /* Static decl */
 static int storvsc_probe(struct device *dev);
-static int storvsc_queuecommand(struct scsi_cmnd *scmnd,
-				void (*done)(struct scsi_cmnd *));
+static int storvsc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scmnd);
 static int storvsc_device_alloc(struct scsi_device *);
 static int storvsc_device_configure(struct scsi_device *);
 static int storvsc_host_reset_handler(struct scsi_cmnd *scmnd);
@@ -595,7 +594,7 @@ static unsigned int copy_from_bounce_buffer(struct scatterlist *orig_sgl,
 /*
  * storvsc_queuecommand - Initiate command processing
  */
-static int storvsc_queuecommand(struct scsi_cmnd *scmnd,
+static int storvsc_queuecommand_lck(struct scsi_cmnd *scmnd,
 				void (*done)(struct scsi_cmnd *))
 {
 	int ret;
@@ -783,6 +782,8 @@ retry_request:
 	return ret;
 }
 
+static DEF_SCSI_QCMD(storvsc_queuecommand)
+
 static int storvsc_merge_bvec(struct request_queue *q,
 			      struct bvec_merge_data *bmd, struct bio_vec *bvec)
 {
diff --git a/drivers/staging/iio/accel/adis16220_core.c b/drivers/staging/iio/accel/adis16220_core.c
index c86d1498737..1c1e98aee2d 100644
--- a/drivers/staging/iio/accel/adis16220_core.c
+++ b/drivers/staging/iio/accel/adis16220_core.c
@@ -507,7 +507,7 @@ static IIO_DEVICE_ATTR(reset, S_IWUSR, NULL,
 		adis16220_write_reset, 0);
 
 #define IIO_DEV_ATTR_CAPTURE(_store)				\
-	IIO_DEVICE_ATTR(capture, S_IWUGO, NULL, _store, 0)
+	IIO_DEVICE_ATTR(capture, S_IWUSR, NULL, _store, 0)
 
 static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture);
 
diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c
index 463e5cba830..991440015e9 100644
--- a/drivers/staging/intel_sst/intel_sst_app_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_app_interface.c
@@ -34,7 +34,6 @@
 #include <linux/uaccess.h>
 #include <linux/firmware.h>
 #include <linux/ioctl.h>
-#include <linux/smp_lock.h>
 #ifdef CONFIG_MRST_RAR_HANDLER
 #include <linux/rar_register.h>
 #include "../../../drivers/staging/memrar/memrar.h"
@@ -244,12 +243,12 @@ static int intel_sst_mmap_play_capture(u32 str_id,
 	int retval, i;
 	struct stream_info *stream;
 	struct snd_sst_mmap_buff_entry *buf_entry;
+	struct snd_sst_mmap_buff_entry *tmp_buf;
 
 	pr_debug("sst:called for str_id %d\n", str_id);
 	retval = sst_validate_strid(str_id);
 	if (retval)
 		return -EINVAL;
-	BUG_ON(!mmap_buf);
 
 	stream = &sst_drv_ctx->streams[str_id];
 	if (stream->mmapped != true)
@@ -262,14 +261,24 @@ static int intel_sst_mmap_play_capture(u32 str_id,
 	stream->curr_bytes = 0;
 	stream->cumm_bytes = 0;
 
+	tmp_buf = kcalloc(mmap_buf->entries, sizeof(*tmp_buf), GFP_KERNEL);
+	if (!tmp_buf)
+		return -ENOMEM;
+	if (copy_from_user(tmp_buf, (void __user *)mmap_buf->buff,
+			mmap_buf->entries * sizeof(*tmp_buf))) {
+		retval = -EFAULT;
+		goto out_free;
+	}
+
 	pr_debug("sst:new buffers count %d status %d\n",
 			mmap_buf->entries, stream->status);
-	buf_entry = mmap_buf->buff;
+	buf_entry = tmp_buf;
 	for (i = 0; i < mmap_buf->entries; i++) {
-		BUG_ON(!buf_entry);
 		bufs = kzalloc(sizeof(*bufs), GFP_KERNEL);
-		if (!bufs)
-			return -ENOMEM;
+		if (!bufs) {
+			retval = -ENOMEM;
+			goto out_free;
+		}
 		bufs->size = buf_entry->size;
 		bufs->offset = buf_entry->offset;
 		bufs->addr = sst_drv_ctx->mmap_mem;
@@ -293,13 +302,15 @@ static int intel_sst_mmap_play_capture(u32 str_id,
 			if (sst_play_frame(str_id) < 0) {
 				pr_warn("sst: play frames fail\n");
 				mutex_unlock(&stream->lock);
-				return -EIO;
+				retval = -EIO;
+				goto out_free;
 			}
 		} else if (stream->ops == STREAM_OPS_CAPTURE) {
 			if (sst_capture_frame(str_id) < 0) {
 				pr_warn("sst: capture frame fail\n");
 				mutex_unlock(&stream->lock);
-				return -EIO;
+				retval = -EIO;
+				goto out_free;
 			}
 		}
 	}
@@ -314,6 +325,9 @@ static int intel_sst_mmap_play_capture(u32 str_id,
 	if (retval >= 0)
 		retval = stream->cumm_bytes;
 	pr_debug("sst:end of play/rec ioctl bytes = %d!!\n", retval);
+
+out_free:
+	kfree(tmp_buf);
 	return retval;
 }
 
@@ -377,7 +391,7 @@ static int snd_sst_fill_kernel_list(struct stream_info *stream,
 {
 	struct sst_stream_bufs *stream_bufs;
 	unsigned long index, mmap_len;
-	unsigned char *bufp;
+	unsigned char __user *bufp;
 	unsigned long size, copied_size;
 	int retval = 0, add_to_list = 0;
 	static int sent_offset;
@@ -512,9 +526,7 @@ static int snd_sst_copy_userbuf_capture(struct stream_info *stream,
 			/* copy to user */
 			list_for_each_entry_safe(entry, _entry,
 						copy_to_list, node) {
-				if (copy_to_user((void *)
-					     iovec[entry->iov_index].iov_base +
-					     entry->iov_offset,
+				if (copy_to_user(iovec[entry->iov_index].iov_base + entry->iov_offset,
 					     kbufs->addr + entry->offset,
 					     entry->size)) {
 					/* Clean up the list and return error */
@@ -590,7 +602,7 @@ static int intel_sst_read_write(unsigned int str_id, char __user *buf,
 			buf, (int) count, (int) stream->status);
 
 	stream->buf_type = SST_BUF_USER_STATIC;
-	iovec.iov_base = (void *)buf;
+	iovec.iov_base = buf;
 	iovec.iov_len  = count;
 	nr_segs = 1;
 
@@ -838,7 +850,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		break;
 
 	case _IOC_NR(SNDRV_SST_STREAM_SET_PARAMS): {
-		struct snd_sst_params *str_param = (struct snd_sst_params *)arg;
+		struct snd_sst_params str_param;
 
 		pr_debug("sst: IOCTL_SET_PARAMS recieved!\n");
 		if (minor != STREAM_MODULE) {
@@ -846,17 +858,25 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			break;
 		}
 
+		if (copy_from_user(&str_param, (void __user *)arg,
+				sizeof(str_param))) {
+			retval = -EFAULT;
+			break;
+		}
+
 		if (!str_id) {
 
-			retval = sst_get_stream(str_param);
+			retval = sst_get_stream(&str_param);
 			if (retval > 0) {
 				struct stream_info *str_info;
+				char __user *dest;
+
 				sst_drv_ctx->stream_cnt++;
 				data->str_id = retval;
 				str_info = &sst_drv_ctx->streams[retval];
 				str_info->src = SST_DRV;
-				retval = copy_to_user(&str_param->stream_id,
-						&retval, sizeof(__u32));
+				dest = (char __user *)arg + offsetof(struct snd_sst_params, stream_id);
+				retval = copy_to_user(dest, &retval, sizeof(__u32));
 				if (retval)
 					retval = -EFAULT;
 			} else {
@@ -866,16 +886,14 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		} else {
 			pr_debug("sst: SET_STREAM_PARAMS recieved!\n");
 			/* allocated set params only */
-			retval = sst_set_stream_param(str_id, str_param);
+			retval = sst_set_stream_param(str_id, &str_param);
 			/* Block the call for reply */
 			if (!retval) {
 				int sfreq = 0, word_size = 0, num_channel = 0;
-				sfreq =	str_param->sparams.uc.pcm_params.sfreq;
-				word_size = str_param->sparams.
-						uc.pcm_params.pcm_wd_sz;
-				num_channel = str_param->
-					sparams.uc.pcm_params.num_chan;
-				if (str_param->ops == STREAM_OPS_CAPTURE) {
+				sfreq =	str_param.sparams.uc.pcm_params.sfreq;
+				word_size = str_param.sparams.uc.pcm_params.pcm_wd_sz;
+				num_channel = str_param.sparams.uc.pcm_params.num_chan;
+				if (str_param.ops == STREAM_OPS_CAPTURE) {
 					sst_drv_ctx->scard_ops->\
 					set_pcm_audio_params(sfreq,
 						word_size, num_channel);
@@ -885,41 +903,39 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		break;
 	}
 	case _IOC_NR(SNDRV_SST_SET_VOL): {
-		struct snd_sst_vol *set_vol;
-		struct snd_sst_vol *rec_vol = (struct snd_sst_vol *)arg;
+		struct snd_sst_vol set_vol;
+
+		if (copy_from_user(&set_vol, (void __user *)arg,
+				sizeof(set_vol))) {
+			pr_debug("sst: copy failed\n");
+			retval = -EFAULT;
+			break;
+		}
 		pr_debug("sst: SET_VOLUME recieved for %d!\n",
-				rec_vol->stream_id);
-		if (minor == STREAM_MODULE && rec_vol->stream_id == 0) {
+				set_vol.stream_id);
+		if (minor == STREAM_MODULE && set_vol.stream_id == 0) {
 			pr_debug("sst: invalid operation!\n");
 			retval = -EPERM;
 			break;
 		}
-		set_vol = kzalloc(sizeof(*set_vol), GFP_ATOMIC);
-		if (!set_vol) {
-			pr_debug("sst: mem allocation failed\n");
-			retval = -ENOMEM;
-			break;
-		}
-		if (copy_from_user(set_vol, rec_vol, sizeof(*set_vol))) {
-			pr_debug("sst: copy failed\n");
-			retval = -EFAULT;
-			break;
-		}
-		retval = sst_set_vol(set_vol);
-		kfree(set_vol);
+		retval = sst_set_vol(&set_vol);
 		break;
 	}
 	case _IOC_NR(SNDRV_SST_GET_VOL): {
-		struct snd_sst_vol *rec_vol = (struct snd_sst_vol *)arg;
 		struct snd_sst_vol get_vol;
+
+		if (copy_from_user(&get_vol, (void __user *)arg,
+				sizeof(get_vol))) {
+			retval = -EFAULT;
+			break;
+		}
 		pr_debug("sst: IOCTL_GET_VOLUME recieved for stream = %d!\n",
-				rec_vol->stream_id);
-		if (minor == STREAM_MODULE && rec_vol->stream_id == 0) {
+				get_vol.stream_id);
+		if (minor == STREAM_MODULE && get_vol.stream_id == 0) {
 			pr_debug("sst: invalid operation!\n");
 			retval = -EPERM;
 			break;
 		}
-		get_vol.stream_id = rec_vol->stream_id;
 		retval = sst_get_vol(&get_vol);
 		if (retval) {
 			retval = -EIO;
@@ -928,7 +944,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		pr_debug("sst: id:%d\n, vol:%d, ramp_dur:%d, ramp_type:%d\n",
 				get_vol.stream_id, get_vol.volume,
 				get_vol.ramp_duration, get_vol.ramp_type);
-		if (copy_to_user((struct snd_sst_vol *)arg,
+		if (copy_to_user((struct snd_sst_vol __user *)arg,
 				&get_vol, sizeof(get_vol))) {
 			retval = -EFAULT;
 			break;
@@ -938,25 +954,20 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 	}
 
 	case _IOC_NR(SNDRV_SST_MUTE): {
-		struct snd_sst_mute *set_mute;
-		struct snd_sst_vol *rec_mute = (struct snd_sst_vol *)arg;
-		pr_debug("sst: SNDRV_SST_SET_VOLUME recieved for %d!\n",
-			rec_mute->stream_id);
-		if (minor == STREAM_MODULE && rec_mute->stream_id == 0) {
-			retval = -EPERM;
-			break;
-		}
-		set_mute = kzalloc(sizeof(*set_mute), GFP_ATOMIC);
-		if (!set_mute) {
-			retval = -ENOMEM;
+		struct snd_sst_mute set_mute;
+
+		if (copy_from_user(&set_mute, (void __user *)arg,
+				sizeof(set_mute))) {
+			retval = -EFAULT;
 			break;
 		}
-		if (copy_from_user(set_mute, rec_mute, sizeof(*set_mute))) {
-			retval = -EFAULT;
+		pr_debug("sst: SNDRV_SST_SET_VOLUME recieved for %d!\n",
+			set_mute.stream_id);
+		if (minor == STREAM_MODULE && set_mute.stream_id == 0) {
+			retval = -EPERM;
 			break;
 		}
-		retval = sst_set_mute(set_mute);
-		kfree(set_mute);
+		retval = sst_set_mute(&set_mute);
 		break;
 	}
 	case _IOC_NR(SNDRV_SST_STREAM_GET_PARAMS): {
@@ -973,7 +984,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			retval = -EIO;
 			break;
 		}
-		if (copy_to_user((struct snd_sst_get_stream_params *)arg,
+		if (copy_to_user((struct snd_sst_get_stream_params __user *)arg,
 					&get_params, sizeof(get_params))) {
 			retval = -EFAULT;
 			break;
@@ -983,16 +994,22 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 	}
 
 	case _IOC_NR(SNDRV_SST_MMAP_PLAY):
-	case _IOC_NR(SNDRV_SST_MMAP_CAPTURE):
+	case _IOC_NR(SNDRV_SST_MMAP_CAPTURE): {
+		struct snd_sst_mmap_buffs mmap_buf;
+
 		pr_debug("sst: SNDRV_SST_MMAP_PLAY/CAPTURE recieved!\n");
 		if (minor != STREAM_MODULE) {
 			retval = -EBADRQC;
 			break;
 		}
-		retval = intel_sst_mmap_play_capture(str_id,
-				(struct snd_sst_mmap_buffs *)arg);
+		if (copy_from_user(&mmap_buf, (void __user *)arg,
+				sizeof(mmap_buf))) {
+			retval = -EFAULT;
+			break;
+		}
+		retval = intel_sst_mmap_play_capture(str_id, &mmap_buf);
 		break;
-
+	}
 	case _IOC_NR(SNDRV_SST_STREAM_DROP):
 		pr_debug("sst: SNDRV_SST_IOCTL_DROP recieved!\n");
 		if (minor != STREAM_MODULE) {
@@ -1003,7 +1020,6 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		break;
 
 	case _IOC_NR(SNDRV_SST_STREAM_GET_TSTAMP): {
-		unsigned long long *ms = (unsigned long long *)arg;
 		struct snd_sst_tstamp tstamp = {0};
 		unsigned long long time, freq, mod;
 
@@ -1013,14 +1029,14 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			break;
 		}
 		memcpy_fromio(&tstamp,
-			((void *)(sst_drv_ctx->mailbox + SST_TIME_STAMP)
-			+(str_id * sizeof(tstamp))),
+			sst_drv_ctx->mailbox + SST_TIME_STAMP + str_id * sizeof(tstamp),
 			sizeof(tstamp));
 		time = tstamp.samples_rendered;
 		freq = (unsigned long long) tstamp.sampling_frequency;
 		time = time * 1000; /* converting it to ms */
 		mod = do_div(time, freq);
-		if (copy_to_user(ms, &time, sizeof(*ms)))
+		if (copy_to_user((void __user *)arg, &time,
+				sizeof(unsigned long long)))
 			retval = -EFAULT;
 		break;
 	}
@@ -1065,92 +1081,118 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 	}
 
 	case _IOC_NR(SNDRV_SST_SET_TARGET_DEVICE): {
-		struct snd_sst_target_device *target_device;
+		struct snd_sst_target_device target_device;
 
 		pr_debug("sst: SET_TARGET_DEVICE recieved!\n");
-		target_device =	(struct snd_sst_target_device *)arg;
-		BUG_ON(!target_device);
+		if (copy_from_user(&target_device, (void __user *)arg,
+				sizeof(target_device))) {
+			retval = -EFAULT;
+			break;
+		}
 		if (minor != AM_MODULE) {
 			retval = -EBADRQC;
 			break;
 		}
-		retval = sst_target_device_select(target_device);
+		retval = sst_target_device_select(&target_device);
 		break;
 	}
 
 	case _IOC_NR(SNDRV_SST_DRIVER_INFO): {
-		struct snd_sst_driver_info *info =
-			(struct snd_sst_driver_info *)arg;
+		struct snd_sst_driver_info info;
 
 		pr_debug("sst: SNDRV_SST_DRIVER_INFO recived\n");
-		info->version = SST_VERSION_NUM;
+		info.version = SST_VERSION_NUM;
 		/* hard coding, shud get sumhow later */
-		info->active_pcm_streams = sst_drv_ctx->stream_cnt -
+		info.active_pcm_streams = sst_drv_ctx->stream_cnt -
 						sst_drv_ctx->encoded_cnt;
-		info->active_enc_streams = sst_drv_ctx->encoded_cnt;
-		info->max_pcm_streams = MAX_ACTIVE_STREAM - MAX_ENC_STREAM;
-		info->max_enc_streams = MAX_ENC_STREAM;
-		info->buf_per_stream = sst_drv_ctx->mmap_len;
+		info.active_enc_streams = sst_drv_ctx->encoded_cnt;
+		info.max_pcm_streams = MAX_ACTIVE_STREAM - MAX_ENC_STREAM;
+		info.max_enc_streams = MAX_ENC_STREAM;
+		info.buf_per_stream = sst_drv_ctx->mmap_len;
+		if (copy_to_user((void __user *)arg, &info,
+				sizeof(info)))
+			retval = -EFAULT;
 		break;
 	}
 
 	case _IOC_NR(SNDRV_SST_STREAM_DECODE): {
-		struct snd_sst_dbufs *param =
-				(struct snd_sst_dbufs *)arg, dbufs_local;
-		int i;
+		struct snd_sst_dbufs param;
+		struct snd_sst_dbufs dbufs_local;
 		struct snd_sst_buffs ibufs, obufs;
-		struct snd_sst_buff_entry ibuf_temp[param->ibufs->entries],
-				obuf_temp[param->obufs->entries];
+		struct snd_sst_buff_entry *ibuf_tmp, *obuf_tmp;
+		char __user *dest;
 
 		pr_debug("sst: SNDRV_SST_STREAM_DECODE recived\n");
 		if (minor != STREAM_MODULE) {
 			retval = -EBADRQC;
 			break;
 		}
-		if (!param) {
-			retval = -EINVAL;
+		if (copy_from_user(&param, (void __user *)arg,
+				sizeof(param))) {
+			retval = -EFAULT;
 			break;
 		}
 
-		dbufs_local.input_bytes_consumed = param->input_bytes_consumed;
+		dbufs_local.input_bytes_consumed = param.input_bytes_consumed;
 		dbufs_local.output_bytes_produced =
-					param->output_bytes_produced;
-		dbufs_local.ibufs = &ibufs;
-		dbufs_local.obufs = &obufs;
-		dbufs_local.ibufs->entries = param->ibufs->entries;
-		dbufs_local.ibufs->type = param->ibufs->type;
-		dbufs_local.obufs->entries = param->obufs->entries;
-		dbufs_local.obufs->type = param->obufs->type;
-
-		dbufs_local.ibufs->buff_entry = ibuf_temp;
-		for (i = 0; i < dbufs_local.ibufs->entries; i++) {
-			ibuf_temp[i].buffer =
-				param->ibufs->buff_entry[i].buffer;
-			ibuf_temp[i].size =
-				param->ibufs->buff_entry[i].size;
+					param.output_bytes_produced;
+
+		if (copy_from_user(&ibufs, (void __user *)param.ibufs, sizeof(ibufs))) {
+			retval = -EFAULT;
+			break;
+		}
+		if (copy_from_user(&obufs, (void __user *)param.obufs, sizeof(obufs))) {
+			retval = -EFAULT;
+			break;
 		}
-		dbufs_local.obufs->buff_entry = obuf_temp;
-		for (i = 0; i < dbufs_local.obufs->entries; i++) {
-			obuf_temp[i].buffer =
-				param->obufs->buff_entry[i].buffer;
-			obuf_temp[i].size =
-				param->obufs->buff_entry[i].size;
+
+		ibuf_tmp = kcalloc(ibufs.entries, sizeof(*ibuf_tmp), GFP_KERNEL);
+		obuf_tmp = kcalloc(obufs.entries, sizeof(*obuf_tmp), GFP_KERNEL);
+		if (!ibuf_tmp || !obuf_tmp) {
+			retval = -ENOMEM;
+			goto free_iobufs;
+		}
+
+		if (copy_from_user(ibuf_tmp, (void __user *)ibufs.buff_entry,
+				ibufs.entries * sizeof(*ibuf_tmp))) {
+			retval = -EFAULT;
+			goto free_iobufs;
 		}
+		ibufs.buff_entry = ibuf_tmp;
+		dbufs_local.ibufs = &ibufs;
+
+		if (copy_from_user(obuf_tmp, (void __user *)obufs.buff_entry,
+				obufs.entries * sizeof(*obuf_tmp))) {
+			retval = -EFAULT;
+			goto free_iobufs;
+		}
+		obufs.buff_entry = obuf_tmp;
+		dbufs_local.obufs = &obufs;
+
 		retval = sst_decode(str_id, &dbufs_local);
-		if (retval)
-			retval =  -EAGAIN;
-		if (copy_to_user(&param->input_bytes_consumed,
+		if (retval) {
+			retval = -EAGAIN;
+			goto free_iobufs;
+		}
+
+		dest = (char __user *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed);
+		if (copy_to_user(dest,
 				&dbufs_local.input_bytes_consumed,
 				sizeof(unsigned long long))) {
-			retval =  -EFAULT;
-			break;
+			retval = -EFAULT;
+			goto free_iobufs;
 		}
-		if (copy_to_user(&param->output_bytes_produced,
+
+		dest = (char __user *)arg + offsetof(struct snd_sst_dbufs, input_bytes_consumed);
+		if (copy_to_user(dest,
 				&dbufs_local.output_bytes_produced,
 				sizeof(unsigned long long))) {
-			retval =  -EFAULT;
-			break;
+			retval = -EFAULT;
+			goto free_iobufs;
 		}
+free_iobufs:
+		kfree(ibuf_tmp);
+		kfree(obuf_tmp);
 		break;
 	}
 
@@ -1164,7 +1206,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 		break;
 
 	case _IOC_NR(SNDRV_SST_STREAM_BYTES_DECODED): {
-		unsigned long long *bytes = (unsigned long long *)arg;
+		unsigned long long __user *bytes = (unsigned long long __user *)arg;
 		struct snd_sst_tstamp tstamp = {0};
 
 		pr_debug("sst: STREAM_BYTES_DECODED recieved!\n");
@@ -1173,8 +1215,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			break;
 		}
 		memcpy_fromio(&tstamp,
-			((void *)(sst_drv_ctx->mailbox + SST_TIME_STAMP)
-			+(str_id * sizeof(tstamp))),
+			sst_drv_ctx->mailbox + SST_TIME_STAMP + str_id * sizeof(tstamp),
 			sizeof(tstamp));
 		if (copy_to_user(bytes, &tstamp.bytes_processed,
 				sizeof(*bytes)))
@@ -1197,7 +1238,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
 			kfree(fw_info);
 			break;
 		}
-		if (copy_to_user((struct snd_sst_dbufs *)arg,
+		if (copy_to_user((struct snd_sst_dbufs __user *)arg,
 				fw_info, sizeof(*fw_info))) {
 			kfree(fw_info);
 			retval = -EFAULT;
diff --git a/drivers/staging/intel_sst/intel_sst_common.h b/drivers/staging/intel_sst/intel_sst_common.h
index 73a98c851e4..bf0ead78bfa 100644
--- a/drivers/staging/intel_sst/intel_sst_common.h
+++ b/drivers/staging/intel_sst/intel_sst_common.h
@@ -231,8 +231,8 @@ struct stream_info {
 	spinlock_t          pcm_lock;
 	bool			mmapped;
 	unsigned int		sg_index; /*  current buf Index  */
-	unsigned char		*cur_ptr; /*  Current static bufs  */
-	struct snd_sst_buf_entry *buf_entry;
+	unsigned char __user 	*cur_ptr; /*  Current static bufs  */
+	struct snd_sst_buf_entry __user *buf_entry;
 	struct sst_block	data_blk; /* stream ops block */
 	struct sst_block	ctrl_blk; /* stream control cmd block */
 	enum snd_sst_buf_type   buf_type;
diff --git a/drivers/staging/intel_sst/intel_sst_stream_encoded.c b/drivers/staging/intel_sst/intel_sst_stream_encoded.c
index fbae39fda5c..5c455608b02 100644
--- a/drivers/staging/intel_sst/intel_sst_stream_encoded.c
+++ b/drivers/staging/intel_sst/intel_sst_stream_encoded.c
@@ -1269,7 +1269,7 @@ finish:
 	dbufs->output_bytes_produced = total_output;
 	str_info->status = str_info->prev;
 	str_info->prev = STREAM_DECODE;
-	str_info->decode_ibuf = NULL;
 	kfree(str_info->decode_ibuf);
+	str_info->decode_ibuf = NULL;
 	return retval;
 }
diff --git a/drivers/staging/keucr/init.c b/drivers/staging/keucr/init.c
index 1934805844f..978bf87ff13 100644
--- a/drivers/staging/keucr/init.c
+++ b/drivers/staging/keucr/init.c
@@ -22,7 +22,7 @@ int ENE_InitMedia(struct us_data *us)
 	int	result;
 	BYTE	MiscReg03 = 0;
 
-	printk("--- Initial Nedia ---\n");
+	printk("--- Init Media ---\n");
 	result = ENE_Read_BYTE(us, REG_CARD_STATUS, &MiscReg03);
 	if (result != USB_STOR_XFER_GOOD)
 	{
@@ -64,7 +64,7 @@ int ENE_Read_BYTE(struct us_data *us, WORD index, void *buf)
 	struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
 	int result;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x01;
 	bcb->Flags			= 0x80;
@@ -92,7 +92,7 @@ int ENE_SDInit(struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->Flags = 0x80;
 	bcb->CDB[0] = 0xF2;
@@ -112,7 +112,7 @@ int ENE_SDInit(struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x80;
@@ -161,7 +161,7 @@ int ENE_MSInit(struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x80;
@@ -219,7 +219,7 @@ int ENE_SMInit(struct us_data *us)
 		return USB_STOR_TRANSPORT_ERROR;
 	}
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x80;
@@ -341,7 +341,7 @@ int ENE_LoadBinCode(struct us_data *us, BYTE flag)
 		break;
 	}
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x800;
 	bcb->Flags =0x00;
@@ -433,7 +433,7 @@ int ENE_Read_Data(struct us_data *us, void *buf, unsigned int length)
 
 	//printk("transport --- ENE_Read_Data\n");
 	// set up the command wrapper
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = length;
 	bcb->Flags =0x80;
@@ -470,7 +470,7 @@ int ENE_Write_Data(struct us_data *us, void *buf, unsigned int length)
 
 	//printk("transport --- ENE_Write_Data\n");
 	// set up the command wrapper
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = length;
 	bcb->Flags =0x00;
diff --git a/drivers/staging/keucr/ms.c b/drivers/staging/keucr/ms.c
index d4340a9da87..9a3fdb4e4fe 100644
--- a/drivers/staging/keucr/ms.c
+++ b/drivers/staging/keucr/ms.c
@@ -15,7 +15,7 @@ int MS_ReaderCopyBlock(struct us_data *us, WORD oldphy, WORD newphy, WORD PhyBlo
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x200*len;
 	bcb->Flags			= 0x00;
@@ -53,7 +53,7 @@ int MS_ReaderReadPage(struct us_data *us, DWORD PhyBlockAddr, BYTE PageNum, PDWO
 		return USB_STOR_TRANSPORT_ERROR;
 
 	// Read Page Data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x200;
 	bcb->Flags			= 0x80;
@@ -69,7 +69,7 @@ int MS_ReaderReadPage(struct us_data *us, DWORD PhyBlockAddr, BYTE PageNum, PDWO
 		return USB_STOR_TRANSPORT_ERROR;
 
 	// Read Extra Data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x4;
 	bcb->Flags			= 0x80;
@@ -108,7 +108,7 @@ int MS_ReaderEraseBlock(struct us_data *us, DWORD PhyBlockAddr)
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x200;
 	bcb->Flags			= 0x80;
@@ -673,7 +673,7 @@ int MS_LibReadExtraBlock(struct us_data *us, DWORD PhyBlock, BYTE PageNum, BYTE
 	//printk("MS_LibReadExtraBlock --- PhyBlock = %x, PageNum = %x, blen = %x\n", PhyBlock, PageNum, blen);
 
 	// Read Extra Data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x4 * blen;
 	bcb->Flags			= 0x80;
@@ -700,7 +700,7 @@ int MS_LibReadExtra(struct us_data *us, DWORD PhyBlock, BYTE PageNum, MS_LibType
 	BYTE	ExtBuf[4];
 
 	//printk("MS_LibReadExtra --- PhyBlock = %x, PageNum = %x\n", PhyBlock, PageNum);
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x4;
 	bcb->Flags			= 0x80;
@@ -807,7 +807,7 @@ int MS_LibOverwriteExtra(struct us_data *us, DWORD PhyBlockAddr, BYTE PageNum, B
 	if (result != USB_STOR_XFER_GOOD)
 		return USB_STOR_TRANSPORT_ERROR;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = 0x4;
 	bcb->Flags			= 0x80;
diff --git a/drivers/staging/keucr/msscsi.c b/drivers/staging/keucr/msscsi.c
index ad0c5c62993..cb92d25acee 100644
--- a/drivers/staging/keucr/msscsi.c
+++ b/drivers/staging/keucr/msscsi.c
@@ -145,7 +145,7 @@ int MS_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
 		}
 
 		// set up the command wrapper
-		memset(bcb, 0, sizeof(bcb));
+		memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 		bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 		bcb->DataTransferLength = blenByte;
 		bcb->Flags  = 0x80;
@@ -193,7 +193,7 @@ int MS_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
 			blkno  = phyblk * 0x20 + PageNum;
 
 			// set up the command wrapper
-			memset(bcb, 0, sizeof(bcb));
+			memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 			bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 			bcb->DataTransferLength = 0x200 * len;
 			bcb->Flags  = 0x80;
@@ -250,7 +250,7 @@ int MS_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb)
 		}
 
 		// set up the command wrapper
-		memset(bcb, 0, sizeof(bcb));
+		memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 		bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 		bcb->DataTransferLength = blenByte;
 		bcb->Flags  = 0x00;
diff --git a/drivers/staging/keucr/scsiglue.c b/drivers/staging/keucr/scsiglue.c
index a2671404f7a..da4f42af383 100644
--- a/drivers/staging/keucr/scsiglue.c
+++ b/drivers/staging/keucr/scsiglue.c
@@ -87,7 +87,7 @@ static int slave_configure(struct scsi_device *sdev)
 
 /* This is always called with scsi_lock(host) held */
 //----- queuecommand() ---------------------
-static int queuecommand(struct scsi_cmnd *srb, void (*done)(struct scsi_cmnd *))
+static int queuecommand_lck(struct scsi_cmnd *srb, void (*done)(struct scsi_cmnd *))
 {
 	struct us_data *us = host_to_us(srb->device->host);
 
@@ -117,6 +117,8 @@ static int queuecommand(struct scsi_cmnd *srb, void (*done)(struct scsi_cmnd *))
 	return 0;
 }
 
+static DEF_SCSI_QCMD(queuecommand)
+
 /***********************************************************************
  * Error handling functions
  ***********************************************************************/
diff --git a/drivers/staging/keucr/sdscsi.c b/drivers/staging/keucr/sdscsi.c
index 6c332f850eb..d646507a361 100644
--- a/drivers/staging/keucr/sdscsi.c
+++ b/drivers/staging/keucr/sdscsi.c
@@ -152,7 +152,7 @@ int SD_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb)
 		bnByte = bn;
 		
 	// set up the command wrapper
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = blenByte;
 	bcb->Flags  = 0x80;
@@ -192,7 +192,7 @@ int SD_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb)
 		bnByte = bn;
 
 	// set up the command wrapper
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength = blenByte;
 	bcb->Flags  = 0x00;
diff --git a/drivers/staging/keucr/smilsub.c b/drivers/staging/keucr/smilsub.c
index 844b6598863..1b52535a388 100644
--- a/drivers/staging/keucr/smilsub.c
+++ b/drivers/staging/keucr/smilsub.c
@@ -266,7 +266,7 @@ int Ssfdc_D_ReadSect(struct us_data *us, BYTE *buf,BYTE *redundant)
 	addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
 
 	// Read sect data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x80;
@@ -281,7 +281,7 @@ int Ssfdc_D_ReadSect(struct us_data *us, BYTE *buf,BYTE *redundant)
 		return USB_STOR_TRANSPORT_ERROR;
 
 	// Read redundant
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x10;
 	bcb->Flags			= 0x80;
@@ -319,7 +319,7 @@ int Ssfdc_D_ReadBlock(struct us_data *us, WORD count, BYTE *buf,BYTE *redundant)
 	addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
 
 	// Read sect data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200*count;
 	bcb->Flags			= 0x80;
@@ -334,7 +334,7 @@ int Ssfdc_D_ReadBlock(struct us_data *us, WORD count, BYTE *buf,BYTE *redundant)
 		return USB_STOR_TRANSPORT_ERROR;
 
 	// Read redundant
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x10;
 	bcb->Flags			= 0x80;
@@ -536,7 +536,7 @@ int Ssfdc_D_CopyBlock(struct us_data *us, WORD count, BYTE *buf,BYTE *redundant)
 	WriteAddr = WriteAddr*(WORD)Ssfdc.MaxSectors;
 
 	// Write sect data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200*count;
 	bcb->Flags			= 0x00;
@@ -754,7 +754,7 @@ int Ssfdc_D_WriteSectForCopy(struct us_data *us, BYTE *buf, BYTE *redundant)
 	addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
 
 	// Write sect data
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x00;
@@ -791,7 +791,7 @@ int Ssfdc_D_EraseBlock(struct us_data *us)
 	addr=(WORD)Media.Zone*Ssfdc.MaxBlocks+Media.PhyBlock;
 	addr=addr*(WORD)Ssfdc.MaxSectors;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x200;
 	bcb->Flags			= 0x80;
@@ -827,7 +827,7 @@ int Ssfdc_D_ReadRedtData(struct us_data *us, BYTE *redundant)
 	addr = (WORD)Media.Zone*Ssfdc.MaxBlocks+Media.PhyBlock;
 	addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x10;
 	bcb->Flags			= 0x80;
@@ -870,7 +870,7 @@ int Ssfdc_D_WriteRedtData(struct us_data *us, BYTE *redundant)
 	addr = (WORD)Media.Zone*Ssfdc.MaxBlocks+Media.PhyBlock;
 	addr = addr*(WORD)Ssfdc.MaxSectors+Media.Sector;
 
-	memset(bcb, 0, sizeof(bcb));
+	memset(bcb, 0, sizeof(struct bulk_cb_wrap));
 	bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
 	bcb->DataTransferLength	= 0x10;
 	bcb->Flags			= 0x80;
diff --git a/drivers/staging/keucr/transport.c b/drivers/staging/keucr/transport.c
index fd98df643ab..111160cce44 100644
--- a/drivers/staging/keucr/transport.c
+++ b/drivers/staging/keucr/transport.c
@@ -40,7 +40,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout)
 	us->current_urb->error_count = 0;
 	us->current_urb->status = 0;
 
-//	us->current_urb->transfer_flags = URB_NO_SETUP_DMA_MAP;
+	us->current_urb->transfer_flags = 0;
 	if (us->current_urb->transfer_buffer == us->iobuf)
 		us->current_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 	us->current_urb->transfer_dma = us->iobuf_dma;
diff --git a/drivers/staging/line6/control.c b/drivers/staging/line6/control.c
index 040e25ca6d3..67e23b6e2d3 100644
--- a/drivers/staging/line6/control.c
+++ b/drivers/staging/line6/control.c
@@ -266,210 +266,210 @@ VARIAX_PARAM_R(float, mix2);
 VARIAX_PARAM_R(float, mix1);
 VARIAX_PARAM_R(int, pickup_wiring);
 
-static DEVICE_ATTR(tweak, S_IWUGO | S_IRUGO, pod_get_tweak, pod_set_tweak);
-static DEVICE_ATTR(wah_position, S_IWUGO | S_IRUGO, pod_get_wah_position,
+static DEVICE_ATTR(tweak, S_IWUSR | S_IRUGO, pod_get_tweak, pod_set_tweak);
+static DEVICE_ATTR(wah_position, S_IWUSR | S_IRUGO, pod_get_wah_position,
 		   pod_set_wah_position);
-static DEVICE_ATTR(compression_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(compression_gain, S_IWUSR | S_IRUGO,
 		   pod_get_compression_gain, pod_set_compression_gain);
-static DEVICE_ATTR(vol_pedal_position, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(vol_pedal_position, S_IWUSR | S_IRUGO,
 		   pod_get_vol_pedal_position, pod_set_vol_pedal_position);
-static DEVICE_ATTR(compression_threshold, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(compression_threshold, S_IWUSR | S_IRUGO,
 		   pod_get_compression_threshold,
 		   pod_set_compression_threshold);
-static DEVICE_ATTR(pan, S_IWUGO | S_IRUGO, pod_get_pan, pod_set_pan);
-static DEVICE_ATTR(amp_model_setup, S_IWUGO | S_IRUGO, pod_get_amp_model_setup,
+static DEVICE_ATTR(pan, S_IWUSR | S_IRUGO, pod_get_pan, pod_set_pan);
+static DEVICE_ATTR(amp_model_setup, S_IWUSR | S_IRUGO, pod_get_amp_model_setup,
 		   pod_set_amp_model_setup);
-static DEVICE_ATTR(amp_model, S_IWUGO | S_IRUGO, pod_get_amp_model,
+static DEVICE_ATTR(amp_model, S_IWUSR | S_IRUGO, pod_get_amp_model,
 		   pod_set_amp_model);
-static DEVICE_ATTR(drive, S_IWUGO | S_IRUGO, pod_get_drive, pod_set_drive);
-static DEVICE_ATTR(bass, S_IWUGO | S_IRUGO, pod_get_bass, pod_set_bass);
-static DEVICE_ATTR(mid, S_IWUGO | S_IRUGO, pod_get_mid, pod_set_mid);
-static DEVICE_ATTR(lowmid, S_IWUGO | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
-static DEVICE_ATTR(treble, S_IWUGO | S_IRUGO, pod_get_treble, pod_set_treble);
-static DEVICE_ATTR(highmid, S_IWUGO | S_IRUGO, pod_get_highmid,
+static DEVICE_ATTR(drive, S_IWUSR | S_IRUGO, pod_get_drive, pod_set_drive);
+static DEVICE_ATTR(bass, S_IWUSR | S_IRUGO, pod_get_bass, pod_set_bass);
+static DEVICE_ATTR(mid, S_IWUSR | S_IRUGO, pod_get_mid, pod_set_mid);
+static DEVICE_ATTR(lowmid, S_IWUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
+static DEVICE_ATTR(treble, S_IWUSR | S_IRUGO, pod_get_treble, pod_set_treble);
+static DEVICE_ATTR(highmid, S_IWUSR | S_IRUGO, pod_get_highmid,
 		   pod_set_highmid);
-static DEVICE_ATTR(chan_vol, S_IWUGO | S_IRUGO, pod_get_chan_vol,
+static DEVICE_ATTR(chan_vol, S_IWUSR | S_IRUGO, pod_get_chan_vol,
 		   pod_set_chan_vol);
-static DEVICE_ATTR(reverb_mix, S_IWUGO | S_IRUGO, pod_get_reverb_mix,
+static DEVICE_ATTR(reverb_mix, S_IWUSR | S_IRUGO, pod_get_reverb_mix,
 		   pod_set_reverb_mix);
-static DEVICE_ATTR(effect_setup, S_IWUGO | S_IRUGO, pod_get_effect_setup,
+static DEVICE_ATTR(effect_setup, S_IWUSR | S_IRUGO, pod_get_effect_setup,
 		   pod_set_effect_setup);
-static DEVICE_ATTR(band_1_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_1_frequency, S_IWUSR | S_IRUGO,
 		   pod_get_band_1_frequency, pod_set_band_1_frequency);
-static DEVICE_ATTR(presence, S_IWUGO | S_IRUGO, pod_get_presence,
+static DEVICE_ATTR(presence, S_IWUSR | S_IRUGO, pod_get_presence,
 		   pod_set_presence);
-static DEVICE_ATTR2(treble__bass, treble, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(treble__bass, treble, S_IWUSR | S_IRUGO,
 		    pod_get_treble__bass, pod_set_treble__bass);
-static DEVICE_ATTR(noise_gate_enable, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(noise_gate_enable, S_IWUSR | S_IRUGO,
 		   pod_get_noise_gate_enable, pod_set_noise_gate_enable);
-static DEVICE_ATTR(gate_threshold, S_IWUGO | S_IRUGO, pod_get_gate_threshold,
+static DEVICE_ATTR(gate_threshold, S_IWUSR | S_IRUGO, pod_get_gate_threshold,
 		   pod_set_gate_threshold);
-static DEVICE_ATTR(gate_decay_time, S_IWUGO | S_IRUGO, pod_get_gate_decay_time,
+static DEVICE_ATTR(gate_decay_time, S_IWUSR | S_IRUGO, pod_get_gate_decay_time,
 		   pod_set_gate_decay_time);
-static DEVICE_ATTR(stomp_enable, S_IWUGO | S_IRUGO, pod_get_stomp_enable,
+static DEVICE_ATTR(stomp_enable, S_IWUSR | S_IRUGO, pod_get_stomp_enable,
 		   pod_set_stomp_enable);
-static DEVICE_ATTR(comp_enable, S_IWUGO | S_IRUGO, pod_get_comp_enable,
+static DEVICE_ATTR(comp_enable, S_IWUSR | S_IRUGO, pod_get_comp_enable,
 		   pod_set_comp_enable);
-static DEVICE_ATTR(stomp_time, S_IWUGO | S_IRUGO, pod_get_stomp_time,
+static DEVICE_ATTR(stomp_time, S_IWUSR | S_IRUGO, pod_get_stomp_time,
 		   pod_set_stomp_time);
-static DEVICE_ATTR(delay_enable, S_IWUGO | S_IRUGO, pod_get_delay_enable,
+static DEVICE_ATTR(delay_enable, S_IWUSR | S_IRUGO, pod_get_delay_enable,
 		   pod_set_delay_enable);
-static DEVICE_ATTR(mod_param_1, S_IWUGO | S_IRUGO, pod_get_mod_param_1,
+static DEVICE_ATTR(mod_param_1, S_IWUSR | S_IRUGO, pod_get_mod_param_1,
 		   pod_set_mod_param_1);
-static DEVICE_ATTR(delay_param_1, S_IWUGO | S_IRUGO, pod_get_delay_param_1,
+static DEVICE_ATTR(delay_param_1, S_IWUSR | S_IRUGO, pod_get_delay_param_1,
 		   pod_set_delay_param_1);
-static DEVICE_ATTR(delay_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_param_1_note_value, S_IWUSR | S_IRUGO,
 		   pod_get_delay_param_1_note_value,
 		   pod_set_delay_param_1_note_value);
-static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUSR | S_IRUGO,
 		    pod_get_band_2_frequency__bass,
 		    pod_set_band_2_frequency__bass);
-static DEVICE_ATTR(delay_param_2, S_IWUGO | S_IRUGO, pod_get_delay_param_2,
+static DEVICE_ATTR(delay_param_2, S_IWUSR | S_IRUGO, pod_get_delay_param_2,
 		   pod_set_delay_param_2);
-static DEVICE_ATTR(delay_volume_mix, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_volume_mix, S_IWUSR | S_IRUGO,
 		   pod_get_delay_volume_mix, pod_set_delay_volume_mix);
-static DEVICE_ATTR(delay_param_3, S_IWUGO | S_IRUGO, pod_get_delay_param_3,
+static DEVICE_ATTR(delay_param_3, S_IWUSR | S_IRUGO, pod_get_delay_param_3,
 		   pod_set_delay_param_3);
-static DEVICE_ATTR(reverb_enable, S_IWUGO | S_IRUGO, pod_get_reverb_enable,
+static DEVICE_ATTR(reverb_enable, S_IWUSR | S_IRUGO, pod_get_reverb_enable,
 		   pod_set_reverb_enable);
-static DEVICE_ATTR(reverb_type, S_IWUGO | S_IRUGO, pod_get_reverb_type,
+static DEVICE_ATTR(reverb_type, S_IWUSR | S_IRUGO, pod_get_reverb_type,
 		   pod_set_reverb_type);
-static DEVICE_ATTR(reverb_decay, S_IWUGO | S_IRUGO, pod_get_reverb_decay,
+static DEVICE_ATTR(reverb_decay, S_IWUSR | S_IRUGO, pod_get_reverb_decay,
 		   pod_set_reverb_decay);
-static DEVICE_ATTR(reverb_tone, S_IWUGO | S_IRUGO, pod_get_reverb_tone,
+static DEVICE_ATTR(reverb_tone, S_IWUSR | S_IRUGO, pod_get_reverb_tone,
 		   pod_set_reverb_tone);
-static DEVICE_ATTR(reverb_pre_delay, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(reverb_pre_delay, S_IWUSR | S_IRUGO,
 		   pod_get_reverb_pre_delay, pod_set_reverb_pre_delay);
-static DEVICE_ATTR(reverb_pre_post, S_IWUGO | S_IRUGO, pod_get_reverb_pre_post,
+static DEVICE_ATTR(reverb_pre_post, S_IWUSR | S_IRUGO, pod_get_reverb_pre_post,
 		   pod_set_reverb_pre_post);
-static DEVICE_ATTR(band_2_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_2_frequency, S_IWUSR | S_IRUGO,
 		   pod_get_band_2_frequency, pod_set_band_2_frequency);
-static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUSR | S_IRUGO,
 		    pod_get_band_3_frequency__bass,
 		    pod_set_band_3_frequency__bass);
-static DEVICE_ATTR(wah_enable, S_IWUGO | S_IRUGO, pod_get_wah_enable,
+static DEVICE_ATTR(wah_enable, S_IWUSR | S_IRUGO, pod_get_wah_enable,
 		   pod_set_wah_enable);
-static DEVICE_ATTR(modulation_lo_cut, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(modulation_lo_cut, S_IWUSR | S_IRUGO,
 		   pod_get_modulation_lo_cut, pod_set_modulation_lo_cut);
-static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUSR | S_IRUGO,
 		   pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut);
-static DEVICE_ATTR(volume_pedal_minimum, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(volume_pedal_minimum, S_IWUSR | S_IRUGO,
 		   pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum);
-static DEVICE_ATTR(eq_pre_post, S_IWUGO | S_IRUGO, pod_get_eq_pre_post,
+static DEVICE_ATTR(eq_pre_post, S_IWUSR | S_IRUGO, pod_get_eq_pre_post,
 		   pod_set_eq_pre_post);
-static DEVICE_ATTR(volume_pre_post, S_IWUGO | S_IRUGO, pod_get_volume_pre_post,
+static DEVICE_ATTR(volume_pre_post, S_IWUSR | S_IRUGO, pod_get_volume_pre_post,
 		   pod_set_volume_pre_post);
-static DEVICE_ATTR(di_model, S_IWUGO | S_IRUGO, pod_get_di_model,
+static DEVICE_ATTR(di_model, S_IWUSR | S_IRUGO, pod_get_di_model,
 		   pod_set_di_model);
-static DEVICE_ATTR(di_delay, S_IWUGO | S_IRUGO, pod_get_di_delay,
+static DEVICE_ATTR(di_delay, S_IWUSR | S_IRUGO, pod_get_di_delay,
 		   pod_set_di_delay);
-static DEVICE_ATTR(mod_enable, S_IWUGO | S_IRUGO, pod_get_mod_enable,
+static DEVICE_ATTR(mod_enable, S_IWUSR | S_IRUGO, pod_get_mod_enable,
 		   pod_set_mod_enable);
-static DEVICE_ATTR(mod_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(mod_param_1_note_value, S_IWUSR | S_IRUGO,
 		   pod_get_mod_param_1_note_value,
 		   pod_set_mod_param_1_note_value);
-static DEVICE_ATTR(mod_param_2, S_IWUGO | S_IRUGO, pod_get_mod_param_2,
+static DEVICE_ATTR(mod_param_2, S_IWUSR | S_IRUGO, pod_get_mod_param_2,
 		   pod_set_mod_param_2);
-static DEVICE_ATTR(mod_param_3, S_IWUGO | S_IRUGO, pod_get_mod_param_3,
+static DEVICE_ATTR(mod_param_3, S_IWUSR | S_IRUGO, pod_get_mod_param_3,
 		   pod_set_mod_param_3);
-static DEVICE_ATTR(mod_param_4, S_IWUGO | S_IRUGO, pod_get_mod_param_4,
+static DEVICE_ATTR(mod_param_4, S_IWUSR | S_IRUGO, pod_get_mod_param_4,
 		   pod_set_mod_param_4);
-static DEVICE_ATTR(mod_param_5, S_IWUGO | S_IRUGO, pod_get_mod_param_5,
+static DEVICE_ATTR(mod_param_5, S_IWUSR | S_IRUGO, pod_get_mod_param_5,
 		   pod_set_mod_param_5);
-static DEVICE_ATTR(mod_volume_mix, S_IWUGO | S_IRUGO, pod_get_mod_volume_mix,
+static DEVICE_ATTR(mod_volume_mix, S_IWUSR | S_IRUGO, pod_get_mod_volume_mix,
 		   pod_set_mod_volume_mix);
-static DEVICE_ATTR(mod_pre_post, S_IWUGO | S_IRUGO, pod_get_mod_pre_post,
+static DEVICE_ATTR(mod_pre_post, S_IWUSR | S_IRUGO, pod_get_mod_pre_post,
 		   pod_set_mod_pre_post);
-static DEVICE_ATTR(modulation_model, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(modulation_model, S_IWUSR | S_IRUGO,
 		   pod_get_modulation_model, pod_set_modulation_model);
-static DEVICE_ATTR(band_3_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_3_frequency, S_IWUSR | S_IRUGO,
 		   pod_get_band_3_frequency, pod_set_band_3_frequency);
-static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUSR | S_IRUGO,
 		    pod_get_band_4_frequency__bass,
 		    pod_set_band_4_frequency__bass);
-static DEVICE_ATTR(mod_param_1_double_precision, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(mod_param_1_double_precision, S_IWUSR | S_IRUGO,
 		   pod_get_mod_param_1_double_precision,
 		   pod_set_mod_param_1_double_precision);
-static DEVICE_ATTR(delay_param_1_double_precision, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_param_1_double_precision, S_IWUSR | S_IRUGO,
 		   pod_get_delay_param_1_double_precision,
 		   pod_set_delay_param_1_double_precision);
-static DEVICE_ATTR(eq_enable, S_IWUGO | S_IRUGO, pod_get_eq_enable,
+static DEVICE_ATTR(eq_enable, S_IWUSR | S_IRUGO, pod_get_eq_enable,
 		   pod_set_eq_enable);
-static DEVICE_ATTR(tap, S_IWUGO | S_IRUGO, pod_get_tap, pod_set_tap);
-static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(tap, S_IWUSR | S_IRUGO, pod_get_tap, pod_set_tap);
+static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUSR | S_IRUGO,
 		   pod_get_volume_tweak_pedal_assign,
 		   pod_set_volume_tweak_pedal_assign);
-static DEVICE_ATTR(band_5_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_5_frequency, S_IWUSR | S_IRUGO,
 		   pod_get_band_5_frequency, pod_set_band_5_frequency);
-static DEVICE_ATTR(tuner, S_IWUGO | S_IRUGO, pod_get_tuner, pod_set_tuner);
-static DEVICE_ATTR(mic_selection, S_IWUGO | S_IRUGO, pod_get_mic_selection,
+static DEVICE_ATTR(tuner, S_IWUSR | S_IRUGO, pod_get_tuner, pod_set_tuner);
+static DEVICE_ATTR(mic_selection, S_IWUSR | S_IRUGO, pod_get_mic_selection,
 		   pod_set_mic_selection);
-static DEVICE_ATTR(cabinet_model, S_IWUGO | S_IRUGO, pod_get_cabinet_model,
+static DEVICE_ATTR(cabinet_model, S_IWUSR | S_IRUGO, pod_get_cabinet_model,
 		   pod_set_cabinet_model);
-static DEVICE_ATTR(stomp_model, S_IWUGO | S_IRUGO, pod_get_stomp_model,
+static DEVICE_ATTR(stomp_model, S_IWUSR | S_IRUGO, pod_get_stomp_model,
 		   pod_set_stomp_model);
-static DEVICE_ATTR(roomlevel, S_IWUGO | S_IRUGO, pod_get_roomlevel,
+static DEVICE_ATTR(roomlevel, S_IWUSR | S_IRUGO, pod_get_roomlevel,
 		   pod_set_roomlevel);
-static DEVICE_ATTR(band_4_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_4_frequency, S_IWUSR | S_IRUGO,
 		   pod_get_band_4_frequency, pod_set_band_4_frequency);
-static DEVICE_ATTR(band_6_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_6_frequency, S_IWUSR | S_IRUGO,
 		   pod_get_band_6_frequency, pod_set_band_6_frequency);
-static DEVICE_ATTR(stomp_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(stomp_param_1_note_value, S_IWUSR | S_IRUGO,
 		   pod_get_stomp_param_1_note_value,
 		   pod_set_stomp_param_1_note_value);
-static DEVICE_ATTR(stomp_param_2, S_IWUGO | S_IRUGO, pod_get_stomp_param_2,
+static DEVICE_ATTR(stomp_param_2, S_IWUSR | S_IRUGO, pod_get_stomp_param_2,
 		   pod_set_stomp_param_2);
-static DEVICE_ATTR(stomp_param_3, S_IWUGO | S_IRUGO, pod_get_stomp_param_3,
+static DEVICE_ATTR(stomp_param_3, S_IWUSR | S_IRUGO, pod_get_stomp_param_3,
 		   pod_set_stomp_param_3);
-static DEVICE_ATTR(stomp_param_4, S_IWUGO | S_IRUGO, pod_get_stomp_param_4,
+static DEVICE_ATTR(stomp_param_4, S_IWUSR | S_IRUGO, pod_get_stomp_param_4,
 		   pod_set_stomp_param_4);
-static DEVICE_ATTR(stomp_param_5, S_IWUGO | S_IRUGO, pod_get_stomp_param_5,
+static DEVICE_ATTR(stomp_param_5, S_IWUSR | S_IRUGO, pod_get_stomp_param_5,
 		   pod_set_stomp_param_5);
-static DEVICE_ATTR(stomp_param_6, S_IWUGO | S_IRUGO, pod_get_stomp_param_6,
+static DEVICE_ATTR(stomp_param_6, S_IWUSR | S_IRUGO, pod_get_stomp_param_6,
 		   pod_set_stomp_param_6);
-static DEVICE_ATTR(amp_switch_select, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(amp_switch_select, S_IWUSR | S_IRUGO,
 		   pod_get_amp_switch_select, pod_set_amp_switch_select);
-static DEVICE_ATTR(delay_param_4, S_IWUGO | S_IRUGO, pod_get_delay_param_4,
+static DEVICE_ATTR(delay_param_4, S_IWUSR | S_IRUGO, pod_get_delay_param_4,
 		   pod_set_delay_param_4);
-static DEVICE_ATTR(delay_param_5, S_IWUGO | S_IRUGO, pod_get_delay_param_5,
+static DEVICE_ATTR(delay_param_5, S_IWUSR | S_IRUGO, pod_get_delay_param_5,
 		   pod_set_delay_param_5);
-static DEVICE_ATTR(delay_pre_post, S_IWUGO | S_IRUGO, pod_get_delay_pre_post,
+static DEVICE_ATTR(delay_pre_post, S_IWUSR | S_IRUGO, pod_get_delay_pre_post,
 		   pod_set_delay_pre_post);
-static DEVICE_ATTR(delay_model, S_IWUGO | S_IRUGO, pod_get_delay_model,
+static DEVICE_ATTR(delay_model, S_IWUSR | S_IRUGO, pod_get_delay_model,
 		   pod_set_delay_model);
-static DEVICE_ATTR(delay_verb_model, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_verb_model, S_IWUSR | S_IRUGO,
 		   pod_get_delay_verb_model, pod_set_delay_verb_model);
-static DEVICE_ATTR(tempo_msb, S_IWUGO | S_IRUGO, pod_get_tempo_msb,
+static DEVICE_ATTR(tempo_msb, S_IWUSR | S_IRUGO, pod_get_tempo_msb,
 		   pod_set_tempo_msb);
-static DEVICE_ATTR(tempo_lsb, S_IWUGO | S_IRUGO, pod_get_tempo_lsb,
+static DEVICE_ATTR(tempo_lsb, S_IWUSR | S_IRUGO, pod_get_tempo_lsb,
 		   pod_set_tempo_lsb);
-static DEVICE_ATTR(wah_model, S_IWUGO | S_IRUGO, pod_get_wah_model,
+static DEVICE_ATTR(wah_model, S_IWUSR | S_IRUGO, pod_get_wah_model,
 		   pod_set_wah_model);
-static DEVICE_ATTR(bypass_volume, S_IWUGO | S_IRUGO, pod_get_bypass_volume,
+static DEVICE_ATTR(bypass_volume, S_IWUSR | S_IRUGO, pod_get_bypass_volume,
 		   pod_set_bypass_volume);
-static DEVICE_ATTR(fx_loop_on_off, S_IWUGO | S_IRUGO, pod_get_fx_loop_on_off,
+static DEVICE_ATTR(fx_loop_on_off, S_IWUSR | S_IRUGO, pod_get_fx_loop_on_off,
 		   pod_set_fx_loop_on_off);
-static DEVICE_ATTR(tweak_param_select, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(tweak_param_select, S_IWUSR | S_IRUGO,
 		   pod_get_tweak_param_select, pod_set_tweak_param_select);
-static DEVICE_ATTR(amp1_engage, S_IWUGO | S_IRUGO, pod_get_amp1_engage,
+static DEVICE_ATTR(amp1_engage, S_IWUSR | S_IRUGO, pod_get_amp1_engage,
 		   pod_set_amp1_engage);
-static DEVICE_ATTR(band_1_gain, S_IWUGO | S_IRUGO, pod_get_band_1_gain,
+static DEVICE_ATTR(band_1_gain, S_IWUSR | S_IRUGO, pod_get_band_1_gain,
 		   pod_set_band_1_gain);
-static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUSR | S_IRUGO,
 		    pod_get_band_2_gain__bass, pod_set_band_2_gain__bass);
-static DEVICE_ATTR(band_2_gain, S_IWUGO | S_IRUGO, pod_get_band_2_gain,
+static DEVICE_ATTR(band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain,
 		   pod_set_band_2_gain);
-static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUSR | S_IRUGO,
 		    pod_get_band_3_gain__bass, pod_set_band_3_gain__bass);
-static DEVICE_ATTR(band_3_gain, S_IWUGO | S_IRUGO, pod_get_band_3_gain,
+static DEVICE_ATTR(band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain,
 		   pod_set_band_3_gain);
-static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUSR | S_IRUGO,
 		    pod_get_band_4_gain__bass, pod_set_band_4_gain__bass);
-static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUSR | S_IRUGO,
 		    pod_get_band_5_gain__bass, pod_set_band_5_gain__bass);
-static DEVICE_ATTR(band_4_gain, S_IWUGO | S_IRUGO, pod_get_band_4_gain,
+static DEVICE_ATTR(band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain,
 		   pod_set_band_4_gain);
-static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUSR | S_IRUGO,
 		    pod_get_band_6_gain__bass, pod_set_band_6_gain__bass);
 static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write);
 static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable,
diff --git a/drivers/staging/line6/midi.c b/drivers/staging/line6/midi.c
index 4304dfe6c16..ab67e889d2c 100644
--- a/drivers/staging/line6/midi.c
+++ b/drivers/staging/line6/midi.c
@@ -350,9 +350,9 @@ static ssize_t midi_set_midi_mask_receive(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(midi_mask_transmit, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_mask_transmit, S_IWUSR | S_IRUGO,
 		   midi_get_midi_mask_transmit, midi_set_midi_mask_transmit);
-static DEVICE_ATTR(midi_mask_receive, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_mask_receive, S_IWUSR | S_IRUGO,
 		   midi_get_midi_mask_receive, midi_set_midi_mask_receive);
 
 /* MIDI device destructor */
diff --git a/drivers/staging/line6/pcm.c b/drivers/staging/line6/pcm.c
index e54770e34d2..b9c55f9eb50 100644
--- a/drivers/staging/line6/pcm.c
+++ b/drivers/staging/line6/pcm.c
@@ -79,9 +79,9 @@ static ssize_t pcm_set_impulse_period(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(impulse_volume, S_IWUGO | S_IRUGO, pcm_get_impulse_volume,
+static DEVICE_ATTR(impulse_volume, S_IWUSR | S_IRUGO, pcm_get_impulse_volume,
 		   pcm_set_impulse_volume);
-static DEVICE_ATTR(impulse_period, S_IWUGO | S_IRUGO, pcm_get_impulse_period,
+static DEVICE_ATTR(impulse_period, S_IWUSR | S_IRUGO, pcm_get_impulse_period,
 		   pcm_set_impulse_period);
 
 #endif
diff --git a/drivers/staging/line6/pod.c b/drivers/staging/line6/pod.c
index 22e2cedcacf..d9b30212585 100644
--- a/drivers/staging/line6/pod.c
+++ b/drivers/staging/line6/pod.c
@@ -1051,48 +1051,48 @@ POD_GET_SYSTEM_PARAM(tuner_pitch, 1);
 #undef GET_SYSTEM_PARAM
 
 /* POD special files: */
-static DEVICE_ATTR(channel, S_IWUGO | S_IRUGO, pod_get_channel,
+static DEVICE_ATTR(channel, S_IWUSR | S_IRUGO, pod_get_channel,
 		   pod_set_channel);
 static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write);
 static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write);
 static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write);
-static DEVICE_ATTR(dump, S_IWUGO | S_IRUGO, pod_get_dump, pod_set_dump);
-static DEVICE_ATTR(dump_buf, S_IWUGO | S_IRUGO, pod_get_dump_buf,
+static DEVICE_ATTR(dump, S_IWUSR | S_IRUGO, pod_get_dump, pod_set_dump);
+static DEVICE_ATTR(dump_buf, S_IWUSR | S_IRUGO, pod_get_dump_buf,
 		   pod_set_dump_buf);
-static DEVICE_ATTR(finish, S_IWUGO, line6_nop_read, pod_set_finish);
+static DEVICE_ATTR(finish, S_IWUSR, line6_nop_read, pod_set_finish);
 static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version,
 		   line6_nop_write);
-static DEVICE_ATTR(midi_postprocess, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_postprocess, S_IWUSR | S_IRUGO,
 		   pod_get_midi_postprocess, pod_set_midi_postprocess);
-static DEVICE_ATTR(monitor_level, S_IWUGO | S_IRUGO, pod_get_monitor_level,
+static DEVICE_ATTR(monitor_level, S_IWUSR | S_IRUGO, pod_get_monitor_level,
 		   pod_set_monitor_level);
 static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write);
 static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write);
-static DEVICE_ATTR(retrieve_amp_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_amp_setup, S_IWUSR, line6_nop_read,
 		   pod_set_retrieve_amp_setup);
-static DEVICE_ATTR(retrieve_channel, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_channel, S_IWUSR, line6_nop_read,
 		   pod_set_retrieve_channel);
-static DEVICE_ATTR(retrieve_effects_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_effects_setup, S_IWUSR, line6_nop_read,
 		   pod_set_retrieve_effects_setup);
-static DEVICE_ATTR(routing, S_IWUGO | S_IRUGO, pod_get_routing,
+static DEVICE_ATTR(routing, S_IWUSR | S_IRUGO, pod_get_routing,
 		   pod_set_routing);
 static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number,
 		   line6_nop_write);
-static DEVICE_ATTR(store_amp_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_amp_setup, S_IWUSR, line6_nop_read,
 		   pod_set_store_amp_setup);
-static DEVICE_ATTR(store_channel, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_channel, S_IWUSR, line6_nop_read,
 		   pod_set_store_channel);
-static DEVICE_ATTR(store_effects_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_effects_setup, S_IWUSR, line6_nop_read,
 		   pod_set_store_effects_setup);
-static DEVICE_ATTR(tuner_freq, S_IWUGO | S_IRUGO, pod_get_tuner_freq,
+static DEVICE_ATTR(tuner_freq, S_IWUSR | S_IRUGO, pod_get_tuner_freq,
 		   pod_set_tuner_freq);
-static DEVICE_ATTR(tuner_mute, S_IWUGO | S_IRUGO, pod_get_tuner_mute,
+static DEVICE_ATTR(tuner_mute, S_IWUSR | S_IRUGO, pod_get_tuner_mute,
 		   pod_set_tuner_mute);
 static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write);
 static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write);
 
 #ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
 #endif
 
 /* control info callback */
diff --git a/drivers/staging/line6/toneport.c b/drivers/staging/line6/toneport.c
index 6a10b0f9749..879e6992bbc 100644
--- a/drivers/staging/line6/toneport.c
+++ b/drivers/staging/line6/toneport.c
@@ -154,9 +154,9 @@ static ssize_t toneport_set_led_green(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(led_red, S_IWUGO | S_IRUGO, line6_nop_read,
+static DEVICE_ATTR(led_red, S_IWUSR | S_IRUGO, line6_nop_read,
 		   toneport_set_led_red);
-static DEVICE_ATTR(led_green, S_IWUGO | S_IRUGO, line6_nop_read,
+static DEVICE_ATTR(led_green, S_IWUSR | S_IRUGO, line6_nop_read,
 		   toneport_set_led_green);
 
 static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
diff --git a/drivers/staging/line6/variax.c b/drivers/staging/line6/variax.c
index 894eee7f231..81241cdf1be 100644
--- a/drivers/staging/line6/variax.c
+++ b/drivers/staging/line6/variax.c
@@ -549,21 +549,21 @@ static ssize_t variax_set_raw2(struct device *dev,
 #endif
 
 /* Variax workbench special files: */
-static DEVICE_ATTR(model, S_IWUGO | S_IRUGO, variax_get_model,
+static DEVICE_ATTR(model, S_IWUSR | S_IRUGO, variax_get_model,
 		   variax_set_model);
-static DEVICE_ATTR(volume, S_IWUGO | S_IRUGO, variax_get_volume,
+static DEVICE_ATTR(volume, S_IWUSR | S_IRUGO, variax_get_volume,
 		   variax_set_volume);
-static DEVICE_ATTR(tone, S_IWUGO | S_IRUGO, variax_get_tone, variax_set_tone);
+static DEVICE_ATTR(tone, S_IWUSR | S_IRUGO, variax_get_tone, variax_set_tone);
 static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write);
 static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write);
 static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write);
-static DEVICE_ATTR(active, S_IWUGO | S_IRUGO, variax_get_active,
+static DEVICE_ATTR(active, S_IWUSR | S_IRUGO, variax_get_active,
 		   variax_set_active);
 static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write);
 
 #ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
-static DEVICE_ATTR(raw2, S_IWUGO, line6_nop_read, variax_set_raw2);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw2, S_IWUSR, line6_nop_read, variax_set_raw2);
 #endif
 
 /*
diff --git a/drivers/staging/lirc/Kconfig b/drivers/staging/lirc/Kconfig
index fa790db75d7..cdaff5903a8 100644
--- a/drivers/staging/lirc/Kconfig
+++ b/drivers/staging/lirc/Kconfig
@@ -14,26 +14,19 @@ if LIRC_STAGING
 
 config LIRC_BT829
         tristate "BT829 based hardware"
-	depends on LIRC_STAGING && PCI
+	depends on LIRC && PCI
 	help
 	  Driver for the IR interface on BT829-based hardware
 
-config LIRC_I2C
-	tristate "I2C Based IR Receivers"
-	depends on LIRC_STAGING && I2C
-	help
-	  Driver for I2C-based IR receivers, such as those commonly
-	  found onboard Hauppauge PVR-150/250/350 video capture cards
-
 config LIRC_IGORPLUGUSB
 	tristate "Igor Cesko's USB IR Receiver"
-	depends on LIRC_STAGING && USB
+	depends on LIRC && USB
 	help
 	  Driver for Igor Cesko's USB IR Receiver
 
 config LIRC_IMON
 	tristate "Legacy SoundGraph iMON Receiver and Display"
-	depends on LIRC_STAGING && USB
+	depends on LIRC && USB
 	help
 	  Driver for the original SoundGraph iMON IR Receiver and Display
 
@@ -41,31 +34,31 @@ config LIRC_IMON
 
 config LIRC_IT87
 	tristate "ITE IT87XX CIR Port Receiver"
-	depends on LIRC_STAGING && PNP
+	depends on LIRC && PNP
 	help
 	  Driver for the ITE IT87xx IR Receiver
 
 config LIRC_ITE8709
 	tristate "ITE8709 CIR Port Receiver"
-	depends on LIRC_STAGING && PNP
+	depends on LIRC && PNP
 	help
 	  Driver for the ITE8709 IR Receiver
 
 config LIRC_PARALLEL
 	tristate "Homebrew Parallel Port Receiver"
-	depends on LIRC_STAGING && PARPORT
+	depends on LIRC && PARPORT
 	help
 	  Driver for Homebrew Parallel Port Receivers
 
 config LIRC_SASEM
 	tristate "Sasem USB IR Remote"
-	depends on LIRC_STAGING && USB
+	depends on LIRC && USB
 	help
 	  Driver for the Sasem OnAir Remocon-V or Dign HV5 HTPC IR/VFD Module
 
 config LIRC_SERIAL
 	tristate "Homebrew Serial Port Receiver"
-	depends on LIRC_STAGING
+	depends on LIRC
 	help
 	  Driver for Homebrew Serial Port Receivers
 
@@ -78,19 +71,19 @@ config LIRC_SERIAL_TRANSMITTER
 
 config LIRC_SIR
 	tristate "Built-in SIR IrDA port"
-	depends on LIRC_STAGING
+	depends on LIRC
 	help
 	  Driver for the SIR IrDA port
 
 config LIRC_TTUSBIR
 	tristate "Technotrend USB IR Receiver"
-	depends on LIRC_STAGING && USB
+	depends on LIRC && USB
 	help
 	  Driver for the Technotrend USB IR Receiver
 
 config LIRC_ZILOG
 	tristate "Zilog/Hauppauge IR Transmitter"
-	depends on LIRC_STAGING && I2C
+	depends on LIRC && I2C
 	help
 	  Driver for the Zilog/Hauppauge IR Transmitter, found on
 	  PVR-150/500, HVR-1200/1250/1700/1800, HD-PVR and other cards
diff --git a/drivers/staging/lirc/Makefile b/drivers/staging/lirc/Makefile
index 4da1f3397a1..94af218d837 100644
--- a/drivers/staging/lirc/Makefile
+++ b/drivers/staging/lirc/Makefile
@@ -4,7 +4,6 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_LIRC_BT829)	+= lirc_bt829.o
-obj-$(CONFIG_LIRC_I2C)		+= lirc_i2c.o
 obj-$(CONFIG_LIRC_IGORPLUGUSB)	+= lirc_igorplugusb.o
 obj-$(CONFIG_LIRC_IMON)		+= lirc_imon.o
 obj-$(CONFIG_LIRC_IT87)		+= lirc_it87.o
diff --git a/drivers/staging/lirc/TODO.lirc_i2c b/drivers/staging/lirc/TODO.lirc_i2c
deleted file mode 100644
index 1f0a6ff6543..00000000000
--- a/drivers/staging/lirc/TODO.lirc_i2c
+++ /dev/null
@@ -1,3 +0,0 @@
-lirc_i2c provides support for some drivers that have already a RC
-driver under drivers/media/video. It should be integrated into those
-drivers, in special with drivers/media/video/ir-kbd-i2c.c.
diff --git a/drivers/staging/lirc/TODO.lirc_zilog b/drivers/staging/lirc/TODO.lirc_zilog
new file mode 100644
index 00000000000..6aa312df401
--- /dev/null
+++ b/drivers/staging/lirc/TODO.lirc_zilog
@@ -0,0 +1,13 @@
+The binding between hdpvr and lirc_zilog is currently disabled,
+due to an OOPS reported a few years ago when both the hdpvr and cx18
+drivers were loaded in his system. More details can be seen at:
+	http://www.mail-archive.com/linux-media@vger.kernel.org/msg09163.html
+More tests need to be done, in order to fix the reported issue.
+
+There's a conflict between ir-kbd-i2c: Both provide support for RX events.
+Such conflict needs to be fixed, before moving it out of staging.
+
+The way I2C probe works, it will try to register the driver twice, one
+for RX and another for TX. The logic needs to be fixed to avoid such
+issue.
+
diff --git a/drivers/staging/lirc/lirc_i2c.c b/drivers/staging/lirc/lirc_i2c.c
deleted file mode 100644
index 6df2c0e8d72..00000000000
--- a/drivers/staging/lirc/lirc_i2c.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * lirc_i2c.c
- *
- * i2c IR driver for the onboard IR port on many TV tuner cards, including:
- *  -Flavors of the Hauppauge PVR-150/250/350
- *  -Hauppauge HVR-1300
- *  -PixelView (BT878P+W/FM)
- *  -KNC ONE TV Station/Anubis Typhoon TView Tuner
- *  -Asus TV-Box and Creative/VisionTek BreakOut-Box
- *  -Leadtek Winfast PVR2000
- *
- * Copyright (c) 2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
- * modified for PixelView (BT878P+W/FM) by
- *      Michal Kochanowicz <mkochano@pld.org.pl>
- *      Christoph Bartelmus <lirc@bartelmus.de>
- * modified for KNC ONE TV Station/Anubis Typhoon TView Tuner by
- *      Ulrich Mueller <ulrich.mueller42@web.de>
- * modified for Asus TV-Box and Creative/VisionTek BreakOut-Box by
- *      Stefan Jahn <stefan@lkcc.org>
- * modified for inclusion into kernel sources by
- *      Jerome Brock <jbrock@users.sourceforge.net>
- * modified for Leadtek Winfast PVR2000 by
- *      Thomas Reitmayr (treitmayr@yahoo.com)
- * modified for Hauppauge HVR-1300 by
- *      Jan Frey (jfrey@gmx.de)
- *
- * parts are cut&pasted from the old lirc_haup.c driver
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/kmod.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-
-#include <media/lirc_dev.h>
-
-struct IR {
-	struct lirc_driver l;
-	struct i2c_client  c;
-	int nextkey;
-	unsigned char b[3];
-	unsigned char bits;
-	unsigned char flag;
-};
-
-#define DEVICE_NAME "lirc_i2c"
-
-/* module parameters */
-static int debug;	/* debug output */
-static int minor = -1;	/* minor number */
-
-#define dprintk(fmt, args...)						\
-	do {								\
-		if (debug)						\
-			printk(KERN_DEBUG DEVICE_NAME ": " fmt,		\
-			       ## args);				\
-	} while (0)
-
-static int reverse(int data, int bits)
-{
-	int i;
-	int c;
-
-	for (c = 0, i = 0; i < bits; i++)
-		c |= ((data & (1<<i)) ? 1 : 0) << (bits-1-i);
-
-	return c;
-}
-
-static int add_to_buf_adap(void *data, struct lirc_buffer *buf)
-{
-	struct IR *ir = data;
-	unsigned char keybuf[4];
-
-	keybuf[0] = 0x00;
-	i2c_master_send(&ir->c, keybuf, 1);
-	/* poll IR chip */
-	if (i2c_master_recv(&ir->c, keybuf, sizeof(keybuf)) != sizeof(keybuf)) {
-		dprintk("read error\n");
-		return -EIO;
-	}
-
-	dprintk("key (0x%02x%02x%02x%02x)\n",
-		keybuf[0], keybuf[1], keybuf[2], keybuf[3]);
-
-	/* key pressed ? */
-	if (keybuf[2] == 0xff)
-		return -ENODATA;
-
-	/* remove repeat bit */
-	keybuf[2] &= 0x7f;
-	keybuf[3] |= 0x80;
-
-	lirc_buffer_write(buf, keybuf);
-	return 0;
-}
-
-static int add_to_buf_pcf8574(void *data, struct lirc_buffer *buf)
-{
-	struct IR *ir = data;
-	int rc;
-	unsigned char all, mask;
-	unsigned char key;
-
-	/* compute all valid bits (key code + pressed/release flag) */
-	all = ir->bits | ir->flag;
-
-	/* save IR writable mask bits */
-	mask = i2c_smbus_read_byte(&ir->c) & ~all;
-
-	/* send bit mask */
-	rc = i2c_smbus_write_byte(&ir->c, (0xff & all) | mask);
-
-	/* receive scan code */
-	rc = i2c_smbus_read_byte(&ir->c);
-
-	if (rc == -1) {
-		dprintk("%s read error\n", ir->c.name);
-		return -EIO;
-	}
-
-	/* drop duplicate polls */
-	if (ir->b[0] == (rc & all))
-		return -ENODATA;
-
-	ir->b[0] = rc & all;
-
-	dprintk("%s key 0x%02X %s\n", ir->c.name, rc & ir->bits,
-		(rc & ir->flag) ? "released" : "pressed");
-
-	/* ignore released buttons */
-	if (rc & ir->flag)
-		return -ENODATA;
-
-	/* set valid key code */
-	key  = rc & ir->bits;
-	lirc_buffer_write(buf, &key);
-	return 0;
-}
-
-/* common for Hauppauge IR receivers */
-static int add_to_buf_haup_common(void *data, struct lirc_buffer *buf,
-		unsigned char *keybuf, int size, int offset)
-{
-	struct IR *ir = data;
-	__u16 code;
-	unsigned char codes[2];
-	int ret;
-
-	/* poll IR chip */
-	ret = i2c_master_recv(&ir->c, keybuf, size);
-	if (ret == size) {
-		ir->b[0] = keybuf[offset];
-		ir->b[1] = keybuf[offset+1];
-		ir->b[2] = keybuf[offset+2];
-		if (ir->b[0] != 0x00 && ir->b[1] != 0x00)
-			dprintk("key (0x%02x/0x%02x)\n", ir->b[0], ir->b[1]);
-	} else {
-		dprintk("read error (ret=%d)\n", ret);
-		/* keep last successful read buffer */
-	}
-
-	/* key pressed ? */
-	if ((ir->b[0] & 0x80) == 0)
-		return -ENODATA;
-
-	/* look what we have */
-	code = (((__u16)ir->b[0]&0x7f)<<6) | (ir->b[1]>>2);
-
-	codes[0] = (code >> 8) & 0xff;
-	codes[1] = code & 0xff;
-
-	/* return it */
-	dprintk("sending code 0x%02x%02x to lirc\n", codes[0], codes[1]);
-	lirc_buffer_write(buf, codes);
-	return 0;
-}
-
-/* specific for the Hauppauge PVR150 IR receiver */
-static int add_to_buf_haup_pvr150(void *data, struct lirc_buffer *buf)
-{
-	unsigned char keybuf[6];
-	/* fetch 6 bytes, first relevant is at offset 3 */
-	return add_to_buf_haup_common(data, buf, keybuf, 6, 3);
-}
-
-/* used for all Hauppauge IR receivers but the PVR150 */
-static int add_to_buf_haup(void *data, struct lirc_buffer *buf)
-{
-	unsigned char keybuf[3];
-	/* fetch 3 bytes, first relevant is at offset 0 */
-	return add_to_buf_haup_common(data, buf, keybuf, 3, 0);
-}
-
-
-static int add_to_buf_pvr2000(void *data, struct lirc_buffer *buf)
-{
-	struct IR *ir = data;
-	unsigned char key;
-	s32 flags;
-	s32 code;
-
-	/* poll IR chip */
-	flags = i2c_smbus_read_byte_data(&ir->c, 0x10);
-	if (-1 == flags) {
-		dprintk("read error\n");
-		return -ENODATA;
-	}
-	/* key pressed ? */
-	if (0 == (flags & 0x80))
-		return -ENODATA;
-
-	/* read actual key code */
-	code = i2c_smbus_read_byte_data(&ir->c, 0x00);
-	if (-1 == code) {
-		dprintk("read error\n");
-		return -ENODATA;
-	}
-
-	key = code & 0xFF;
-
-	dprintk("IR Key/Flags: (0x%02x/0x%02x)\n", key, flags & 0xFF);
-
-	/* return it */
-	lirc_buffer_write(buf, &key);
-	return 0;
-}
-
-static int add_to_buf_pixelview(void *data, struct lirc_buffer *buf)
-{
-	struct IR *ir = data;
-	unsigned char key;
-
-	/* poll IR chip */
-	if (1 != i2c_master_recv(&ir->c, &key, 1)) {
-		dprintk("read error\n");
-		return -1;
-	}
-	dprintk("key %02x\n", key);
-
-	/* return it */
-	lirc_buffer_write(buf, &key);
-	return 0;
-}
-
-static int add_to_buf_pv951(void *data, struct lirc_buffer *buf)
-{
-	struct IR *ir = data;
-	unsigned char key;
-	unsigned char codes[4];
-
-	/* poll IR chip */
-	if (1 != i2c_master_recv(&ir->c, &key, 1)) {
-		dprintk("read error\n");
-		return -ENODATA;
-	}
-	/* ignore 0xaa */
-	if (key == 0xaa)
-		return -ENODATA;
-	dprintk("key %02x\n", key);
-
-	codes[0] = 0x61;
-	codes[1] = 0xD6;
-	codes[2] = reverse(key, 8);
-	codes[3] = (~codes[2])&0xff;
-
-	lirc_buffer_write(buf, codes);
-	return 0;
-}
-
-static int add_to_buf_knc1(void *data, struct lirc_buffer *buf)
-{
-	static unsigned char last_key = 0xFF;
-	struct IR *ir = data;
-	unsigned char key;
-
-	/* poll IR chip */
-	if (1 != i2c_master_recv(&ir->c, &key, 1)) {
-		dprintk("read error\n");
-		return -ENODATA;
-	}
-
-	/*
-	 * it seems that 0xFE indicates that a button is still held
-	 * down, while 0xFF indicates that no button is held
-	 * down. 0xFE sequences are sometimes interrupted by 0xFF
-	 */
-
-	dprintk("key %02x\n", key);
-
-	if (key == 0xFF)
-		return -ENODATA;
-
-	if (key == 0xFE)
-		key = last_key;
-
-	last_key = key;
-	lirc_buffer_write(buf, &key);
-
-	return 0;
-}
-
-static int set_use_inc(void *data)
-{
-	struct IR *ir = data;
-
-	dprintk("%s called\n", __func__);
-
-	/* lock bttv in memory while /dev/lirc is in use  */
-	i2c_use_client(&ir->c);
-
-	return 0;
-}
-
-static void set_use_dec(void *data)
-{
-	struct IR *ir = data;
-
-	dprintk("%s called\n", __func__);
-
-	i2c_release_client(&ir->c);
-}
-
-static struct lirc_driver lirc_template = {
-	.name		= "lirc_i2c",
-	.set_use_inc	= set_use_inc,
-	.set_use_dec	= set_use_dec,
-	.dev		= NULL,
-	.owner		= THIS_MODULE,
-};
-
-static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id);
-static int ir_remove(struct i2c_client *client);
-static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg);
-
-static const struct i2c_device_id ir_receiver_id[] = {
-	/* Generic entry for any IR receiver */
-	{ "ir_video", 0 },
-	/* IR device specific entries could be added here */
-	{ }
-};
-
-static struct i2c_driver driver = {
-	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= "i2c ir driver",
-	},
-	.probe		= ir_probe,
-	.remove		= ir_remove,
-	.id_table	= ir_receiver_id,
-	.command	= ir_command,
-};
-
-static void pcf_probe(struct i2c_client *client, struct IR *ir)
-{
-	int ret1, ret2, ret3, ret4;
-
-	ret1 = i2c_smbus_write_byte(client, 0xff);
-	ret2 = i2c_smbus_read_byte(client);
-	ret3 = i2c_smbus_write_byte(client, 0x00);
-	ret4 = i2c_smbus_read_byte(client);
-
-	/* in the Asus TV-Box: bit 1-0 */
-	if (((ret2 & 0x03) == 0x03) && ((ret4 & 0x03) == 0x00)) {
-		ir->bits = (unsigned char) ~0x07;
-		ir->flag = 0x04;
-	/* in the Creative/VisionTek BreakOut-Box: bit 7-6 */
-	} else if (((ret2 & 0xc0) == 0xc0) && ((ret4 & 0xc0) == 0x00)) {
-		ir->bits = (unsigned char) ~0xe0;
-		ir->flag = 0x20;
-	}
-
-	return;
-}
-
-static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
-{
-	struct IR *ir;
-	struct i2c_adapter *adap = client->adapter;
-	unsigned short addr = client->addr;
-	int retval;
-
-	ir = kzalloc(sizeof(struct IR), GFP_KERNEL);
-	if (!ir)
-		return -ENOMEM;
-	memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver));
-	memcpy(&ir->c, client, sizeof(struct i2c_client));
-
-	i2c_set_clientdata(client, ir);
-	ir->l.data    = ir;
-	ir->l.minor   = minor;
-	ir->l.sample_rate = 10;
-	ir->l.dev     = &ir->c.dev;
-	ir->nextkey   = -1;
-
-	switch (addr) {
-	case 0x64:
-		strlcpy(ir->c.name, "Pixelview IR", I2C_NAME_SIZE);
-		ir->l.code_length = 8;
-		ir->l.add_to_buf = add_to_buf_pixelview;
-		break;
-	case 0x4b:
-		strlcpy(ir->c.name, "PV951 IR", I2C_NAME_SIZE);
-		ir->l.code_length = 32;
-		ir->l.add_to_buf = add_to_buf_pv951;
-		break;
-	case 0x71:
-		if (adap->id == I2C_HW_B_CX2388x)
-			strlcpy(ir->c.name, "Hauppauge HVR1300", I2C_NAME_SIZE);
-		else /* bt8xx or cx2341x */
-			/*
-			 * The PVR150 IR receiver uses the same protocol as
-			 * other Hauppauge cards, but the data flow is
-			 * different, so we need to deal with it by its own.
-			 */
-			strlcpy(ir->c.name, "Hauppauge PVR150", I2C_NAME_SIZE);
-		ir->l.code_length = 13;
-		ir->l.add_to_buf = add_to_buf_haup_pvr150;
-		break;
-	case 0x6b:
-		strlcpy(ir->c.name, "Adaptec IR", I2C_NAME_SIZE);
-		ir->l.code_length = 32;
-		ir->l.add_to_buf = add_to_buf_adap;
-		break;
-	case 0x18:
-	case 0x1a:
-		if (adap->id == I2C_HW_B_CX2388x) {
-			strlcpy(ir->c.name, "Leadtek IR", I2C_NAME_SIZE);
-			ir->l.code_length = 8;
-			ir->l.add_to_buf = add_to_buf_pvr2000;
-		} else { /* bt8xx or cx2341x */
-			strlcpy(ir->c.name, "Hauppauge IR", I2C_NAME_SIZE);
-			ir->l.code_length = 13;
-			ir->l.add_to_buf = add_to_buf_haup;
-		}
-		break;
-	case 0x30:
-		strlcpy(ir->c.name, "KNC ONE IR", I2C_NAME_SIZE);
-		ir->l.code_length = 8;
-		ir->l.add_to_buf = add_to_buf_knc1;
-		break;
-	case 0x21:
-	case 0x23:
-		pcf_probe(client, ir);
-		strlcpy(ir->c.name, "TV-Box IR", I2C_NAME_SIZE);
-		ir->l.code_length = 8;
-		ir->l.add_to_buf = add_to_buf_pcf8574;
-		break;
-	default:
-		/* shouldn't happen */
-		printk("lirc_i2c: Huh? unknown i2c address (0x%02x)?\n", addr);
-		kfree(ir);
-		return -EINVAL;
-	}
-	printk(KERN_INFO "lirc_i2c: chip 0x%x found @ 0x%02x (%s)\n",
-	       adap->id, addr, ir->c.name);
-
-	retval = lirc_register_driver(&ir->l);
-
-	if (retval < 0) {
-		printk(KERN_ERR "lirc_i2c: failed to register driver!\n");
-		kfree(ir);
-		return retval;
-	}
-
-	ir->l.minor = retval;
-
-	return 0;
-}
-
-static int ir_remove(struct i2c_client *client)
-{
-	struct IR *ir = i2c_get_clientdata(client);
-
-	/* unregister device */
-	lirc_unregister_driver(ir->l.minor);
-
-	/* free memory */
-	kfree(ir);
-	return 0;
-}
-
-static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg)
-{
-	/* nothing */
-	return 0;
-}
-
-static int __init lirc_i2c_init(void)
-{
-	i2c_add_driver(&driver);
-	return 0;
-}
-
-static void __exit lirc_i2c_exit(void)
-{
-	i2c_del_driver(&driver);
-}
-
-MODULE_DESCRIPTION("Infrared receiver driver for Hauppauge and "
-		   "Pixelview cards (i2c stack)");
-MODULE_AUTHOR("Gerd Knorr, Michal Kochanowicz, Christoph Bartelmus, "
-	      "Ulrich Mueller, Stefan Jahn, Jerome Brock");
-MODULE_LICENSE("GPL");
-
-module_param(minor, int, S_IRUGO);
-MODULE_PARM_DESC(minor, "Preferred minor device number");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable debugging messages");
-
-module_init(lirc_i2c_init);
-module_exit(lirc_i2c_exit);
diff --git a/drivers/staging/lirc/lirc_serial.c b/drivers/staging/lirc/lirc_serial.c
index 971844bbee2..9bcf149c426 100644
--- a/drivers/staging/lirc/lirc_serial.c
+++ b/drivers/staging/lirc/lirc_serial.c
@@ -377,7 +377,7 @@ static int init_timing_params(unsigned int new_duty_cycle,
 	duty_cycle = new_duty_cycle;
 	freq = new_freq;
 
-	loops_per_sec = current_cpu_data.loops_per_jiffy;
+	loops_per_sec = __this_cpu_read(cpu.info.loops_per_jiffy);
 	loops_per_sec *= HZ;
 
 	/* How many clocks in a microsecond?, avoiding long long divide */
@@ -398,7 +398,7 @@ static int init_timing_params(unsigned int new_duty_cycle,
 	dprintk("in init_timing_params, freq=%d, duty_cycle=%d, "
 		"clk/jiffy=%ld, pulse=%ld, space=%ld, "
 		"conv_us_to_clocks=%ld\n",
-		freq, duty_cycle, current_cpu_data.loops_per_jiffy,
+		freq, duty_cycle, __this_cpu_read(cpu_info.loops_per_jiffy),
 		pulse_width, space_width, conv_us_to_clocks);
 	return 0;
 }
diff --git a/drivers/staging/lirc/lirc_zilog.c b/drivers/staging/lirc/lirc_zilog.c
index f0076eb025f..ad29bb1275a 100644
--- a/drivers/staging/lirc/lirc_zilog.c
+++ b/drivers/staging/lirc/lirc_zilog.c
@@ -66,6 +66,7 @@ struct IR {
 	/* Device info */
 	struct mutex ir_lock;
 	int open;
+	bool is_hdpvr;
 
 	/* RX device */
 	struct i2c_client c_rx;
@@ -206,16 +207,12 @@ static int add_to_buf(struct IR *ir)
 		}
 
 		/* key pressed ? */
-#ifdef I2C_HW_B_HDPVR
-		if (ir->c_rx.adapter->id == I2C_HW_B_HDPVR) {
+		if (ir->is_hdpvr) {
 			if (got_data && (keybuf[0] == 0x80))
 				return 0;
 			else if (got_data && (keybuf[0] == 0x00))
 				return -ENODATA;
 		} else if ((ir->b[0] & 0x80) == 0)
-#else
-		if ((ir->b[0] & 0x80) == 0)
-#endif
 			return got_data ? 0 : -ENODATA;
 
 		/* look what we have */
@@ -841,15 +838,15 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key)
 		return ret < 0 ? ret : -EFAULT;
 	}
 
-#ifdef I2C_HW_B_HDPVR
 	/*
 	 * The sleep bits aren't necessary on the HD PVR, and in fact, the
 	 * last i2c_master_recv always fails with a -5, so for now, we're
 	 * going to skip this whole mess and say we're done on the HD PVR
 	 */
-	if (ir->c_rx.adapter->id == I2C_HW_B_HDPVR)
-		goto done;
-#endif
+	if (ir->is_hdpvr) {
+		dprintk("sent code %u, key %u\n", code, key);
+		return 0;
+	}
 
 	/*
 	 * This bit NAKs until the device is ready, so we retry it
@@ -883,7 +880,6 @@ static int send_code(struct IR *ir, unsigned int code, unsigned int key)
 		return -EFAULT;
 	}
 
-done:
 	/* Oh good, it worked */
 	dprintk("sent code %u, key %u\n", code, key);
 	return 0;
@@ -1112,12 +1108,14 @@ static int ir_remove(struct i2c_client *client);
 static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id);
 static int ir_command(struct i2c_client *client, unsigned int cmd, void *arg);
 
+#define ID_FLAG_TX	0x01
+#define ID_FLAG_HDPVR	0x02
+
 static const struct i2c_device_id ir_transceiver_id[] = {
-	/* Generic entry for any IR transceiver */
-	{ "ir_video", 0 },
-	/* IR device specific entries should be added here */
-	{ "ir_tx_z8f0811_haup", 0 },
-	{ "ir_rx_z8f0811_haup", 0 },
+	{ "ir_tx_z8f0811_haup",  ID_FLAG_TX                 },
+	{ "ir_rx_z8f0811_haup",  0                          },
+	{ "ir_tx_z8f0811_hdpvr", ID_FLAG_HDPVR | ID_FLAG_TX },
+	{ "ir_rx_z8f0811_hdpvr", ID_FLAG_HDPVR              },
 	{ }
 };
 
@@ -1197,10 +1195,25 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	int ret;
 	int have_rx = 0, have_tx = 0;
 
-	dprintk("%s: adapter id=0x%x, client addr=0x%02x\n",
-		__func__, adap->id, client->addr);
+	dprintk("%s: adapter name (%s) nr %d, i2c_device_id name (%s), "
+		"client addr=0x%02x\n",
+		__func__, adap->name, adap->nr, id->name, client->addr);
 
 	/*
+	 * FIXME - This probe function probes both the Tx and Rx
+	 * addresses of the IR microcontroller.
+	 *
+	 * However, the I2C subsystem is passing along one I2C client at a
+	 * time, based on matches to the ir_transceiver_id[] table above.
+	 * The expectation is that each i2c_client address will be probed
+	 * individually by drivers so the I2C subsystem can mark all client
+	 * addresses as claimed or not.
+	 *
+	 * This probe routine causes only one of the client addresses, TX or RX,
+	 * to be claimed.  This will cause a problem if the I2C subsystem is
+	 * subsequently triggered to probe unclaimed clients again.
+	 */
+	/*
 	 * The external IR receiver is at i2c address 0x71.
 	 * The IR transmitter is at 0x70.
 	 */
@@ -1242,6 +1255,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	mutex_init(&ir->ir_lock);
 	mutex_init(&ir->buf_lock);
 	ir->need_boot = 1;
+	ir->is_hdpvr = (id->driver_data & ID_FLAG_HDPVR) ? true : false;
 
 	memcpy(&ir->l, &lirc_template, sizeof(struct lirc_driver));
 	ir->l.minor = -1;
diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c
index 75aa7a36307..4ca45ec7fd8 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon.c
@@ -17,7 +17,6 @@
 #include <linux/console.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
-#include <linux/i2c-id.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 #include <linux/interrupt.h>
@@ -733,7 +732,6 @@ static int dcon_probe(struct i2c_client *client, const struct i2c_device_id *id)
  edev:
 	platform_device_unregister(dcon_device);
 	dcon_device = NULL;
-	i2c_set_clientdata(client, NULL);
  eirq:
 	free_irq(DCON_IRQ, &dcon_driver);
  einit:
@@ -757,8 +755,6 @@ static int dcon_remove(struct i2c_client *client)
 		platform_device_unregister(dcon_device);
 	cancel_work_sync(&dcon_work);
 
-	i2c_set_clientdata(client, NULL);
-
 	return 0;
 }
 
diff --git a/drivers/staging/pohmelfs/inode.c b/drivers/staging/pohmelfs/inode.c
index 61685ccceda..56d3a4e5622 100644
--- a/drivers/staging/pohmelfs/inode.c
+++ b/drivers/staging/pohmelfs/inode.c
@@ -826,6 +826,13 @@ const struct address_space_operations pohmelfs_aops = {
 	.set_page_dirty 	= __set_page_dirty_nobuffers,
 };
 
+static void pohmelfs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(pohmelfs_inode_cache, POHMELFS_I(inode));
+}
+
 /*
  * ->detroy_inode() callback. Deletes inode from the caches
  *  and frees private data.
@@ -842,8 +849,8 @@ static void pohmelfs_destroy_inode(struct inode *inode)
 
 	dprintk("%s: pi: %p, inode: %p, ino: %llu.\n",
 		__func__, pi, &pi->vfs_inode, pi->ino);
-	kmem_cache_free(pohmelfs_inode_cache, pi);
 	atomic_long_dec(&psb->total_inodes);
+	call_rcu(&inode->i_rcu, pohmelfs_i_callback);
 }
 
 /*
@@ -1318,8 +1325,8 @@ static void pohmelfs_put_super(struct super_block *sb)
 	}
 
 	psb->trans_scan_timeout = psb->drop_scan_timeout = 0;
-	cancel_rearming_delayed_work(&psb->dwork);
-	cancel_rearming_delayed_work(&psb->drop_dwork);
+	cancel_delayed_work_sync(&psb->dwork);
+	cancel_delayed_work_sync(&psb->drop_dwork);
 	flush_scheduled_work();
 
 	dprintk("%s: stopped workqueues.\n", __func__);
diff --git a/drivers/staging/pohmelfs/path_entry.c b/drivers/staging/pohmelfs/path_entry.c
index 8ec83d2dffb..400a9fc386a 100644
--- a/drivers/staging/pohmelfs/path_entry.c
+++ b/drivers/staging/pohmelfs/path_entry.c
@@ -83,10 +83,11 @@ out:
 int pohmelfs_path_length(struct pohmelfs_inode *pi)
 {
 	struct dentry *d, *root, *first;
-	int len = 1; /* Root slash */
+	int len;
+	unsigned seq;
 
-	first = d = d_find_alias(&pi->vfs_inode);
-	if (!d) {
+	first = d_find_alias(&pi->vfs_inode);
+	if (!first) {
 		dprintk("%s: ino: %llu, mode: %o.\n", __func__, pi->ino, pi->vfs_inode.i_mode);
 		return -ENOENT;
 	}
@@ -95,7 +96,11 @@ int pohmelfs_path_length(struct pohmelfs_inode *pi)
 	root = dget(current->fs->root.dentry);
 	spin_unlock(&current->fs->lock);
 
-	spin_lock(&dcache_lock);
+rename_retry:
+	len = 1; /* Root slash */
+	d = first;
+	seq = read_seqbegin(&rename_lock);
+	rcu_read_lock();
 
 	if (!IS_ROOT(d) && d_unhashed(d))
 		len += UNHASHED_OBSCURE_STRING_SIZE; /* Obscure " (deleted)" string */
@@ -104,7 +109,9 @@ int pohmelfs_path_length(struct pohmelfs_inode *pi)
 		len += d->d_name.len + 1; /* Plus slash */
 		d = d->d_parent;
 	}
-	spin_unlock(&dcache_lock);
+	rcu_read_unlock();
+	if (read_seqretry(&rename_lock, seq))
+		goto rename_retry;
 
 	dput(root);
 	dput(first);
diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c
index d746715d3d8..d83bec876d2 100644
--- a/drivers/staging/quickstart/quickstart.c
+++ b/drivers/staging/quickstart/quickstart.c
@@ -355,7 +355,6 @@ static int quickstart_acpi_remove(struct acpi_device *device, int type)
 static void quickstart_exit(void)
 {
 	input_unregister_device(quickstart_input);
-	input_free_device(quickstart_input);
 
 	device_remove_file(&pf_device->dev, &dev_attr_pressed_button);
 	device_remove_file(&pf_device->dev, &dev_attr_buttons);
@@ -375,6 +374,7 @@ static int __init quickstart_init_input(void)
 {
 	struct quickstart_btn **ptr = &quickstart_data.btn_lst;
 	int count;
+	int ret;
 
 	quickstart_input = input_allocate_device();
 
@@ -391,7 +391,13 @@ static int __init quickstart_init_input(void)
 		ptr = &((*ptr)->next);
 	}
 
-	return input_register_device(quickstart_input);
+	ret = input_register_device(quickstart_input);
+	if (ret) {
+		input_free_device(quickstart_input);
+		return ret;
+	}
+
+	return 0;
 }
 
 static int __init quickstart_init(void)
diff --git a/drivers/staging/rt2860/common/cmm_aes.c b/drivers/staging/rt2860/common/cmm_aes.c
index 1d159ff82fd..a99879bada4 100644
--- a/drivers/staging/rt2860/common/cmm_aes.c
+++ b/drivers/staging/rt2860/common/cmm_aes.c
@@ -330,8 +330,6 @@ void construct_mic_iv(unsigned char *mic_iv,
 	for (i = 8; i < 14; i++)
 		mic_iv[i] = pn_vector[13 - i];	/* mic_iv[8:13] = PN[5:0] */
 #endif
-	i = (payload_length / 256);
-	i = (payload_length % 256);
 	mic_iv[14] = (unsigned char)(payload_length / 256);
 	mic_iv[15] = (unsigned char)(payload_length % 256);
 
diff --git a/drivers/staging/rt2860/usb_main_dev.c b/drivers/staging/rt2860/usb_main_dev.c
index ebf9074a908..cd15daae541 100644
--- a/drivers/staging/rt2860/usb_main_dev.c
+++ b/drivers/staging/rt2860/usb_main_dev.c
@@ -65,6 +65,7 @@ struct usb_device_id rtusb_usb_id[] = {
 	{USB_DEVICE(0x14B2, 0x3C07)},	/* AL */
 	{USB_DEVICE(0x050D, 0x8053)},	/* Belkin */
 	{USB_DEVICE(0x050D, 0x825B)},	/* Belkin */
+	{USB_DEVICE(0x050D, 0x935A)},	/* Belkin F6D4050 v1 */
 	{USB_DEVICE(0x050D, 0x935B)},	/* Belkin F6D4050 v2 */
 	{USB_DEVICE(0x14B2, 0x3C23)},	/* Airlink */
 	{USB_DEVICE(0x14B2, 0x3C27)},	/* Airlink */
@@ -181,6 +182,7 @@ struct usb_device_id rtusb_usb_id[] = {
 	{USB_DEVICE(0x2001, 0x3C09)},	/* D-Link */
 	{USB_DEVICE(0x2001, 0x3C0A)},	/* D-Link 3072 */
 	{USB_DEVICE(0x2019, 0xED14)},	/* Planex Communications, Inc. */
+	{USB_DEVICE(0x0411, 0x015D)},	/* Buffalo Airstation WLI-UC-GN */
 	{}			/* Terminating entry */
 };
 
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 46000d72f4c..3bdf9b31cc4 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -264,8 +264,12 @@ HwHSSIThreeWire(
 
 			udelay(10);
 		}
-		if (TryCnt == TC_3W_POLL_MAX_TRY_CNT)
-			panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp);
+		if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
+			printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:"
+			       " %#X RE|WE bits are not clear!!\n", u1bTmp);
+			dump_stack();
+			return 0;
+		}
 
 		/* RTL8187S HSSI Read/Write Function */
 		u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
@@ -298,13 +302,23 @@ HwHSSIThreeWire(
 				int idx;
 				int ByteCnt = nDataBufBitCnt / 8;
 								/* printk("%d\n",nDataBufBitCnt); */
-				if ((nDataBufBitCnt % 8) != 0)
-				panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n",
-				nDataBufBitCnt);
+				if ((nDataBufBitCnt % 8) != 0) {
+					printk(KERN_ERR "rtl8187se: "
+					       "HwThreeWire(): nDataBufBitCnt(%d)"
+					       " should be multiple of 8!!!\n",
+					       nDataBufBitCnt);
+					dump_stack();
+					nDataBufBitCnt += 8;
+					nDataBufBitCnt &= ~7;
+				}
 
-			       if (nDataBufBitCnt > 64)
-				panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n",
-				nDataBufBitCnt);
+			       if (nDataBufBitCnt > 64) {
+					printk(KERN_ERR "rtl8187se: HwThreeWire():"
+					       " nDataBufBitCnt(%d) should <= 64!!!\n",
+					       nDataBufBitCnt);
+					dump_stack();
+					nDataBufBitCnt = 64;
+				}
 
 				for (idx = 0; idx < ByteCnt; idx++)
 					write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
diff --git a/drivers/staging/rtl8192e/r8192E_core.c b/drivers/staging/rtl8192e/r8192E_core.c
index a202194b5cb..b1786dcac24 100644
--- a/drivers/staging/rtl8192e/r8192E_core.c
+++ b/drivers/staging/rtl8192e/r8192E_core.c
@@ -5829,6 +5829,9 @@ static void rtl8192_rx(struct net_device *dev)
                     }
                 }
 
+		pci_unmap_single(priv->pdev, *((dma_addr_t *) skb->cb),
+			priv->rxbuffersize, PCI_DMA_FROMDEVICE);
+
                 skb = new_skb;
                 priv->rx_buf[priv->rx_idx] = skb;
                 *((dma_addr_t *) skb->cb) = pci_map_single(priv->pdev, skb_tail_pointer(skb), priv->rxbuffersize, PCI_DMA_FROMDEVICE);
diff --git a/drivers/staging/rtl8712/osdep_service.h b/drivers/staging/rtl8712/osdep_service.h
index d1674cd282d..831d81e0e42 100644
--- a/drivers/staging/rtl8712/osdep_service.h
+++ b/drivers/staging/rtl8712/osdep_service.h
@@ -22,7 +22,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kref.h>
-#include <linux/smp_lock.h>
 #include <linux/netdevice.h>
 #include <linux/skbuff.h>
 #include <linux/usb.h>
diff --git a/drivers/staging/rtl8712/usb_halinit.c b/drivers/staging/rtl8712/usb_halinit.c
index f6569dce301..0e9483bbabe 100644
--- a/drivers/staging/rtl8712/usb_halinit.c
+++ b/drivers/staging/rtl8712/usb_halinit.c
@@ -37,7 +37,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter)
 {
 	u8 val8 = 0;
 	u8 ret = _SUCCESS;
-	u8 PollingCnt = 20;
+	int PollingCnt = 20;
 	struct registry_priv *pregistrypriv = &padapter->registrypriv;
 
 	if (pregistrypriv->chip_version == RTL8712_FPGA) {
diff --git a/drivers/staging/samsung-laptop/samsung-laptop.c b/drivers/staging/samsung-laptop/samsung-laptop.c
index eb44b60e1eb..ac2bf11e111 100644
--- a/drivers/staging/samsung-laptop/samsung-laptop.c
+++ b/drivers/staging/samsung-laptop/samsung-laptop.c
@@ -356,7 +356,7 @@ static ssize_t set_silent_state(struct device *dev,
 	}
 	return count;
 }
-static DEVICE_ATTR(silent, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(silent, S_IWUSR | S_IRUGO,
 		   get_silent_state, set_silent_state);
 
 
diff --git a/drivers/staging/se401/Kconfig b/drivers/staging/se401/Kconfig
new file mode 100644
index 00000000000..b7f8222ad21
--- /dev/null
+++ b/drivers/staging/se401/Kconfig
@@ -0,0 +1,13 @@
+config USB_SE401
+	tristate "USB SE401 Camera support (DEPRECATED)"
+	depends on VIDEO_DEV && VIDEO_V4L2_COMMON && USB
+	---help---
+	  Say Y here if you want to connect this type of camera to your
+	  computer's USB port. See <file:Documentation/video4linux/se401.txt>
+	  for more information and for a list of supported cameras.
+
+	  This driver uses the deprecated V4L1 API and will be removed in
+	  2.6.39, unless someone converts it to the V4L2 API.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called se401.
diff --git a/drivers/staging/se401/Makefile b/drivers/staging/se401/Makefile
new file mode 100644
index 00000000000..b465d49783a
--- /dev/null
+++ b/drivers/staging/se401/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_USB_SE401)         += se401.o
diff --git a/drivers/staging/se401/TODO b/drivers/staging/se401/TODO
new file mode 100644
index 00000000000..3b2c0383628
--- /dev/null
+++ b/drivers/staging/se401/TODO
@@ -0,0 +1,5 @@
+This is an obsolete driver for some old webcams that still use V4L1 API. 
+As V4L1 support is being removed from kernel, if nobody take care on it, 
+the driver will be removed for 2.6.39.
+
+Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/media/video/se401.c b/drivers/staging/se401/se401.c
index 41d0166c0f9..41360d7c3e9 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/staging/se401/se401.c
@@ -31,7 +31,6 @@ static const char version[] = "0.24";
 #include <linux/init.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/usb.h>
 #include "se401.h"
@@ -951,9 +950,9 @@ static int se401_open(struct file *file)
 	struct usb_se401 *se401 = (struct usb_se401 *)dev;
 	int err = 0;
 
-	lock_kernel();
+	mutex_lock(&se401->lock);
 	if (se401->user) {
-		unlock_kernel();
+		mutex_unlock(&se401->lock);
 		return -EBUSY;
 	}
 	se401->fbuf = rvmalloc(se401->maxframesize * SE401_NUMFRAMES);
@@ -962,7 +961,7 @@ static int se401_open(struct file *file)
 	else
 		err = -ENOMEM;
 	se401->user = !err;
-	unlock_kernel();
+	mutex_unlock(&se401->lock);
 
 	return err;
 }
diff --git a/drivers/media/video/se401.h b/drivers/staging/se401/se401.h
index bf7d2e9765b..2758f4716c3 100644
--- a/drivers/media/video/se401.h
+++ b/drivers/staging/se401/se401.h
@@ -3,7 +3,7 @@
 #define __LINUX_se401_H
 
 #include <linux/uaccess.h>
-#include <linux/videodev.h>
+#include "videodev.h"
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <linux/mutex.h>
diff --git a/include/linux/videodev.h b/drivers/staging/se401/videodev.h
index b19eab14097..f11efbef1c0 100644
--- a/include/linux/videodev.h
+++ b/drivers/staging/se401/videodev.h
@@ -16,25 +16,6 @@
 #include <linux/ioctl.h>
 #include <linux/videodev2.h>
 
-#if defined(__MIN_V4L1) && defined (__KERNEL__)
-
-/*
- * Used by those V4L2 core functions that need a minimum V4L1 support,
- * in order to allow V4L1 Compatibilty code compilation.
- */
-
-struct video_mbuf
-{
-	int	size;		/* Total memory to map */
-	int	frames;		/* Frames */
-	int	offsets[VIDEO_MAX_FRAME];
-};
-
-#define VIDIOCGMBUF		_IOR('v',20, struct video_mbuf)		/* Memory map buffer info */
-
-#else
-#if defined(CONFIG_VIDEO_V4L1_COMPAT) || !defined (__KERNEL__)
-
 #define VID_TYPE_CAPTURE	1	/* Can capture */
 #define VID_TYPE_TUNER		2	/* Can tune */
 #define VID_TYPE_TELETEXT	4	/* Does teletext */
@@ -328,9 +309,6 @@ struct video_code
 #define VID_PLAY_RESET			13
 #define VID_PLAY_END_MARK		14
 
-#endif /* CONFIG_VIDEO_V4L1_COMPAT */
-#endif /* __MIN_V4L1 */
-
 #endif /* __LINUX_VIDEODEV_H */
 
 /*
diff --git a/drivers/staging/smbfs/cache.c b/drivers/staging/smbfs/cache.c
index dbb98658148..f2a1323ca82 100644
--- a/drivers/staging/smbfs/cache.c
+++ b/drivers/staging/smbfs/cache.c
@@ -62,7 +62,7 @@ smb_invalidate_dircache_entries(struct dentry *parent)
 	struct list_head *next;
 	struct dentry *dentry;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&parent->d_lock);
 	next = parent->d_subdirs.next;
 	while (next != &parent->d_subdirs) {
 		dentry = list_entry(next, struct dentry, d_u.d_child);
@@ -70,7 +70,7 @@ smb_invalidate_dircache_entries(struct dentry *parent)
 		smb_age_dentry(server, dentry);
 		next = next->next;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&parent->d_lock);
 }
 
 /*
@@ -96,13 +96,13 @@ smb_dget_fpos(struct dentry *dentry, struct dentry *parent, unsigned long fpos)
 	}
 
 	/* If a pointer is invalid, we search the dentry. */
-	spin_lock(&dcache_lock);
+	spin_lock(&parent->d_lock);
 	next = parent->d_subdirs.next;
 	while (next != &parent->d_subdirs) {
 		dent = list_entry(next, struct dentry, d_u.d_child);
 		if ((unsigned long)dent->d_fsdata == fpos) {
 			if (dent->d_inode)
-				dget_locked(dent);
+				dget(dent);
 			else
 				dent = NULL;
 			goto out_unlock;
@@ -111,7 +111,7 @@ smb_dget_fpos(struct dentry *dentry, struct dentry *parent, unsigned long fpos)
 	}
 	dent = NULL;
 out_unlock:
-	spin_unlock(&dcache_lock);
+	spin_unlock(&parent->d_lock);
 	return dent;
 }
 
@@ -134,7 +134,7 @@ smb_fill_cache(struct file *filp, void *dirent, filldir_t filldir,
 	qname->hash = full_name_hash(qname->name, qname->len);
 
 	if (dentry->d_op && dentry->d_op->d_hash)
-		if (dentry->d_op->d_hash(dentry, qname) != 0)
+		if (dentry->d_op->d_hash(dentry, inode, qname) != 0)
 			goto end_advance;
 
 	newdent = d_lookup(dentry, qname);
@@ -145,8 +145,8 @@ smb_fill_cache(struct file *filp, void *dirent, filldir_t filldir,
 			goto end_advance;
 	} else {
 		hashed = 1;
-		memcpy((char *) newdent->d_name.name, qname->name,
-		       newdent->d_name.len);
+		/* dir i_mutex is locked because we're in readdir */
+		dentry_update_name_case(newdent, qname);
 	}
 
 	if (!newdent->d_inode) {
diff --git a/drivers/staging/smbfs/dir.c b/drivers/staging/smbfs/dir.c
index f088ea2f6ac..dd612f50749 100644
--- a/drivers/staging/smbfs/dir.c
+++ b/drivers/staging/smbfs/dir.c
@@ -14,6 +14,7 @@
 #include <linux/ctype.h>
 #include <linux/net.h>
 #include <linux/sched.h>
+#include <linux/namei.h>
 
 #include "smb_fs.h"
 #include "smb_mount.h"
@@ -274,9 +275,13 @@ smb_dir_open(struct inode *dir, struct file *file)
  * Dentry operations routines
  */
 static int smb_lookup_validate(struct dentry *, struct nameidata *);
-static int smb_hash_dentry(struct dentry *, struct qstr *);
-static int smb_compare_dentry(struct dentry *, struct qstr *, struct qstr *);
-static int smb_delete_dentry(struct dentry *);
+static int smb_hash_dentry(const struct dentry *, const struct inode *,
+		struct qstr *);
+static int smb_compare_dentry(const struct dentry *,
+		const struct inode *,
+		const struct dentry *, const struct inode *,
+		unsigned int, const char *, const struct qstr *);
+static int smb_delete_dentry(const struct dentry *);
 
 static const struct dentry_operations smbfs_dentry_operations =
 {
@@ -297,13 +302,20 @@ static const struct dentry_operations smbfs_dentry_operations_case =
  * This is the callback when the dcache has a lookup hit.
  */
 static int
-smb_lookup_validate(struct dentry * dentry, struct nameidata *nd)
+smb_lookup_validate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct smb_sb_info *server = server_from_dentry(dentry);
-	struct inode * inode = dentry->d_inode;
-	unsigned long age = jiffies - dentry->d_time;
+	struct smb_sb_info *server;
+	struct inode *inode;
+	unsigned long age;
 	int valid;
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	server = server_from_dentry(dentry);
+	inode = dentry->d_inode;
+	age = jiffies - dentry->d_time;
+
 	/*
 	 * The default validation is based on dentry age:
 	 * we believe in dentries for a few seconds.  (But each
@@ -333,7 +345,8 @@ smb_lookup_validate(struct dentry * dentry, struct nameidata *nd)
 }
 
 static int 
-smb_hash_dentry(struct dentry *dir, struct qstr *this)
+smb_hash_dentry(const struct dentry *dir, const struct inode *inode,
+		struct qstr *this)
 {
 	unsigned long hash;
 	int i;
@@ -347,14 +360,17 @@ smb_hash_dentry(struct dentry *dir, struct qstr *this)
 }
 
 static int
-smb_compare_dentry(struct dentry *dir, struct qstr *a, struct qstr *b)
+smb_compare_dentry(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
 	int i, result = 1;
 
-	if (a->len != b->len)
+	if (len != name->len)
 		goto out;
-	for (i=0; i < a->len; i++) {
-		if (tolower(a->name[i]) != tolower(b->name[i]))
+	for (i=0; i < len; i++) {
+		if (tolower(str[i]) != tolower(name->name[i]))
 			goto out;
 	}
 	result = 0;
@@ -367,7 +383,7 @@ out:
  * We use this to unhash dentries with bad inodes.
  */
 static int
-smb_delete_dentry(struct dentry * dentry)
+smb_delete_dentry(const struct dentry *dentry)
 {
 	if (dentry->d_inode) {
 		if (is_bad_inode(dentry->d_inode)) {
@@ -390,9 +406,9 @@ smb_new_dentry(struct dentry *dentry)
 	struct smb_sb_info *server = server_from_dentry(dentry);
 
 	if (server->mnt->flags & SMB_MOUNT_CASE)
-		dentry->d_op = &smbfs_dentry_operations_case;
+		d_set_d_op(dentry, &smbfs_dentry_operations_case);
 	else
-		dentry->d_op = &smbfs_dentry_operations;
+		d_set_d_op(dentry, &smbfs_dentry_operations);
 	dentry->d_time = jiffies;
 }
 
@@ -454,9 +470,9 @@ smb_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
 	add_entry:
 			server = server_from_dentry(dentry);
 			if (server->mnt->flags & SMB_MOUNT_CASE)
-				dentry->d_op = &smbfs_dentry_operations_case;
+				d_set_d_op(dentry, &smbfs_dentry_operations_case);
 			else
-				dentry->d_op = &smbfs_dentry_operations;
+				d_set_d_op(dentry, &smbfs_dentry_operations);
 
 			d_add(dentry, inode);
 			smb_renew_times(dentry);
diff --git a/drivers/staging/smbfs/file.c b/drivers/staging/smbfs/file.c
index 5dcd19c60eb..31372e7b12d 100644
--- a/drivers/staging/smbfs/file.c
+++ b/drivers/staging/smbfs/file.c
@@ -407,11 +407,14 @@ smb_file_release(struct inode *inode, struct file * file)
  * privileges, so we need our own check for this.
  */
 static int
-smb_file_permission(struct inode *inode, int mask)
+smb_file_permission(struct inode *inode, int mask, unsigned int flags)
 {
 	int mode = inode->i_mode;
 	int error = 0;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	VERBOSE("mode=%x, mask=%x\n", mode, mask);
 
 	/* Look at user permissions */
diff --git a/drivers/staging/smbfs/inode.c b/drivers/staging/smbfs/inode.c
index 540a984bb51..244319dc970 100644
--- a/drivers/staging/smbfs/inode.c
+++ b/drivers/staging/smbfs/inode.c
@@ -62,11 +62,18 @@ static struct inode *smb_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void smb_destroy_inode(struct inode *inode)
+static void smb_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(smb_inode_cachep, SMB_I(inode));
 }
 
+static void smb_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, smb_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct smb_inode_info *ei = (struct smb_inode_info *) foo;
diff --git a/drivers/staging/speakup/buffers.c b/drivers/staging/speakup/buffers.c
index b7b60d5e866..a2db956edd5 100644
--- a/drivers/staging/speakup/buffers.c
+++ b/drivers/staging/speakup/buffers.c
@@ -1,5 +1,4 @@
 #include <linux/console.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/wait.h>
 
diff --git a/drivers/staging/speakup/fakekey.c b/drivers/staging/speakup/fakekey.c
index adb93f21c0d..1b34a877164 100644
--- a/drivers/staging/speakup/fakekey.c
+++ b/drivers/staging/speakup/fakekey.c
@@ -62,7 +62,6 @@ void speakup_remove_virtual_keyboard(void)
 {
 	if (virt_keyboard != NULL) {
 		input_unregister_device(virt_keyboard);
-		input_free_device(virt_keyboard);
 		virt_keyboard = NULL;
 	}
 }
@@ -79,10 +78,10 @@ void speakup_fake_down_arrow(void)
 	/* don't change CPU */
 	preempt_disable();
 
-	__get_cpu_var(reporting_keystroke) = true;
+	__this_cpu_write(reporting_keystroke, true);
 	input_report_key(virt_keyboard, KEY_DOWN, PRESSED);
 	input_report_key(virt_keyboard, KEY_DOWN, RELEASED);
-	__get_cpu_var(reporting_keystroke) = false;
+	__this_cpu_write(reporting_keystroke, false);
 
 	/* reenable preemption */
 	preempt_enable();
@@ -96,10 +95,5 @@ void speakup_fake_down_arrow(void)
 	 */
 bool speakup_fake_key_pressed(void)
 {
-	bool is_pressed;
-
-	is_pressed = get_cpu_var(reporting_keystroke);
-	put_cpu_var(reporting_keystroke);
-
-	return is_pressed;
+	return this_cpu_read(reporting_keystroke);
 }
diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c
index c7932da03c5..63a9d0adf32 100644
--- a/drivers/staging/spectra/ffsport.c
+++ b/drivers/staging/spectra/ffsport.c
@@ -656,7 +656,7 @@ static int SBD_setup_device(struct spectra_nand_dev *dev, int which)
 	/* Here we force report 512 byte hardware sector size to Kernel */
 	blk_queue_logical_block_size(dev->queue, 512);
 
-	blk_queue_ordered(dev->queue, QUEUE_ORDERED_DRAIN_FLUSH);
+	blk_queue_flush(dev->queue, REQ_FLUSH);
 
 	dev->thread = kthread_run(spectra_trans_thread, dev, "nand_thd");
 	if (IS_ERR(dev->thread)) {
diff --git a/drivers/staging/stradis/Kconfig b/drivers/staging/stradis/Kconfig
deleted file mode 100644
index 92e89114189..00000000000
--- a/drivers/staging/stradis/Kconfig
+++ /dev/null
@@ -1,7 +0,0 @@
-config VIDEO_STRADIS
-        tristate "Stradis 4:2:2 MPEG-2 video driver (DEPRECATED)"
-        depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
-        help
-          Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
-          driver for PCI.  There is a product page at
-          <http://www.stradis.com/>.
diff --git a/drivers/staging/stradis/Makefile b/drivers/staging/stradis/Makefile
deleted file mode 100644
index 0f1feab59e3..00000000000
--- a/drivers/staging/stradis/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-obj-$(CONFIG_VIDEO_STRADIS) += stradis.o
-
-EXTRA_CFLAGS += -Idrivers/media/video
diff --git a/drivers/staging/stradis/TODO b/drivers/staging/stradis/TODO
deleted file mode 100644
index f48150fe2fa..00000000000
--- a/drivers/staging/stradis/TODO
+++ /dev/null
@@ -1,6 +0,0 @@
-This is an obsolete driver for ancient stradis hardware.
-We couldn't find anyone with this hardware in order to port it to use V4L2.
-
-If nobody take care on it, the driver will be removed for 2.6.38.
-
-Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/staging/stradis/stradis.c b/drivers/staging/stradis/stradis.c
deleted file mode 100644
index a057824e7eb..00000000000
--- a/drivers/staging/stradis/stradis.c
+++ /dev/null
@@ -1,2213 +0,0 @@
-/*
- * stradis.c - stradis 4:2:2 mpeg decoder driver
- *
- * Stradis 4:2:2 MPEG-2 Decoder Driver
- * Copyright (C) 1999 Nathan Laredo <laredo@gnu.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/pci.h>
-#include <linux/signal.h>
-#include <asm/io.h>
-#include <linux/ioport.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <linux/sched.h>
-#include <asm/types.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <asm/uaccess.h>
-#include <linux/vmalloc.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-
-#include "saa7146.h"
-#include "saa7146reg.h"
-#include "ibmmpeg2.h"
-#include "saa7121.h"
-#include "cs8420.h"
-
-#define DEBUG(x)		/* debug driver */
-#undef  IDEBUG			/* debug irq handler */
-#undef  MDEBUG			/* debug memory management */
-
-#define SAA7146_MAX 6
-
-static struct saa7146 saa7146s[SAA7146_MAX];
-
-static int saa_num;		/* number of SAA7146s in use */
-
-static int video_nr = -1;
-module_param(video_nr, int, 0);
-MODULE_LICENSE("GPL");
-
-#define nDebNormal	0x00480000
-#define nDebNoInc	0x00480000
-#define nDebVideo	0xd0480000
-#define nDebAudio	0xd0400000
-#define nDebDMA		0x02c80000
-
-#define oDebNormal	0x13c80000
-#define oDebNoInc	0x13c80000
-#define oDebVideo	0xd1080000
-#define oDebAudio	0xd1080000
-#define oDebDMA		0x03080000
-
-#define NewCard		(saa->boardcfg[3])
-#define ChipControl	(saa->boardcfg[1])
-#define NTSCFirstActive	(saa->boardcfg[4])
-#define PALFirstActive	(saa->boardcfg[5])
-#define NTSCLastActive	(saa->boardcfg[54])
-#define PALLastActive	(saa->boardcfg[55])
-#define Have2MB		(saa->boardcfg[18] & 0x40)
-#define HaveCS8420	(saa->boardcfg[18] & 0x04)
-#define IBMMPEGCD20	(saa->boardcfg[18] & 0x20)
-#define HaveCS3310	(saa->boardcfg[18] & 0x01)
-#define CS3310MaxLvl	((saa->boardcfg[30] << 8) | saa->boardcfg[31])
-#define HaveCS4341	(saa->boardcfg[40] == 2)
-#define SDIType		(saa->boardcfg[27])
-#define CurrentMode	(saa->boardcfg[2])
-
-#define debNormal	(NewCard ? nDebNormal : oDebNormal)
-#define debNoInc	(NewCard ? nDebNoInc : oDebNoInc)
-#define debVideo	(NewCard ? nDebVideo : oDebVideo)
-#define debAudio	(NewCard ? nDebAudio : oDebAudio)
-#define debDMA		(NewCard ? nDebDMA : oDebDMA)
-
-#ifdef USE_RESCUE_EEPROM_SDM275
-static unsigned char rescue_eeprom[64] = {
-	0x00, 0x01, 0x04, 0x13, 0x26, 0x0f, 0x10, 0x00, 0x00, 0x00, 0x43, 0x63,
-	0x22, 0x01, 0x29, 0x15, 0x73, 0x00, 0x1f,  'd',  'e',  'c',  'x',  'l',
-	 'd',  'v',  'a', 0x02, 0x00, 0x01, 0x00, 0xcc, 0xa4, 0x63, 0x09, 0xe2,
-	0x10, 0x00, 0x0a, 0x00, 0x02, 0x02,  'd',  'e',  'c',  'x',  'l',  'a',
-	0x00, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x00, 0x00,
-};
-#endif
-
-/* ----------------------------------------------------------------------- */
-/* Hardware I2C functions */
-static void I2CWipe(struct saa7146 *saa)
-{
-	int i;
-	/* set i2c to ~=100kHz, abort transfer, clear busy */
-	saawrite(0x600 | SAA7146_I2C_ABORT, SAA7146_I2C_STATUS);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) |
-		 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
-	/* wait for i2c registers to be programmed */
-	for (i = 0; i < 1000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
-		schedule();
-	saawrite(0x600, SAA7146_I2C_STATUS);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) |
-		 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
-	/* wait for i2c registers to be programmed */
-	for (i = 0; i < 1000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
-		schedule();
-	saawrite(0x600, SAA7146_I2C_STATUS);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) |
-		 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
-	/* wait for i2c registers to be programmed */
-	for (i = 0; i < 1000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
-		schedule();
-}
-
-/* read I2C */
-static int I2CRead(struct saa7146 *saa, unsigned char addr,
-		   unsigned char subaddr, int dosub)
-{
-	int i;
-
-	if (saaread(SAA7146_I2C_STATUS) & 0x3c)
-		I2CWipe(saa);
-	for (i = 0;
-		i < 1000 && (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY);
-		i++)
-		schedule();
-	if (i == 1000)
-		I2CWipe(saa);
-	if (dosub)
-		saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 8) |
-			((subaddr & 0xff) << 16) | 0xed, SAA7146_I2C_TRANSFER);
-	else
-		saawrite(((addr & 0xfe) << 24) | (((addr | 1) & 0xff) << 16) |
-			0xf1, SAA7146_I2C_TRANSFER);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) |
-		 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
-	/* wait for i2c registers to be programmed */
-	for (i = 0; i < 1000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
-		schedule();
-	/* wait for valid data */
-	for (i = 0; i < 1000 &&
-	     (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++)
-		schedule();
-	if (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_ERR)
-		return -1;
-	if (i == 1000)
-		printk("i2c setup read timeout\n");
-	saawrite(0x41, SAA7146_I2C_TRANSFER);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) |
-		 SAA7146_MC2_UPLD_I2C, SAA7146_MC2);
-	/* wait for i2c registers to be programmed */
-	for (i = 0; i < 1000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_I2C); i++)
-		schedule();
-	/* wait for valid data */
-	for (i = 0; i < 1000 &&
-	     (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_BUSY); i++)
-		schedule();
-	if (saaread(SAA7146_I2C_TRANSFER) & SAA7146_I2C_ERR)
-		return -1;
-	if (i == 1000)
-		printk("i2c read timeout\n");
-	return ((saaread(SAA7146_I2C_TRANSFER) >> 24) & 0xff);
-}
-
-/* set both to write both bytes, reset it to write only b1 */
-
-static int I2CWrite(struct saa7146 *saa, unsigned char addr, unsigned char b1,
-		    unsigned char b2, int both)
-{
-	int i;
-	u32 data;
-
-	if (saaread(SAA7146_I2C_STATUS) & 0x3c)
-		I2CWipe(saa);
-	for (i = 0; i < 1000 &&
-	     (saaread(SAA7146_I2C_STATUS) & SAA7146_I2C_BUSY); i++)
-		schedule();
-	if (i == 1000)
-		I2CWipe(saa);
-	data = ((addr & 0xfe) << 24) | ((b1 & 0xff) << 16);
-	if (both)
-		data |= ((b2 & 0xff) << 8) | 0xe5;
-	else
-		data |= 0xd1;
-	saawrite(data, SAA7146_I2C_TRANSFER);
-	saawrite((SAA7146_MC2_UPLD_I2C << 16) | SAA7146_MC2_UPLD_I2C,
-		 SAA7146_MC2);
-	return 0;
-}
-
-static void attach_inform(struct saa7146 *saa, int id)
-{
-	int i;
-
-	DEBUG(printk(KERN_DEBUG "stradis%d: i2c: device found=%02x\n", saa->nr,
-		id));
-	if (id == 0xa0) {	/* we have rev2 or later board, fill in info */
-		for (i = 0; i < 64; i++)
-			saa->boardcfg[i] = I2CRead(saa, 0xa0, i, 1);
-#ifdef USE_RESCUE_EEPROM_SDM275
-		if (saa->boardcfg[0] != 0) {
-			printk("stradis%d: WARNING: EEPROM STORED VALUES HAVE "
-				"BEEN IGNORED\n", saa->nr);
-			for (i = 0; i < 64; i++)
-				saa->boardcfg[i] = rescue_eeprom[i];
-		}
-#endif
-		printk("stradis%d: config =", saa->nr);
-		for (i = 0; i < 51; i++) {
-			printk(" %02x", saa->boardcfg[i]);
-		}
-		printk("\n");
-	}
-}
-
-static void I2CBusScan(struct saa7146 *saa)
-{
-	int i;
-	for (i = 0; i < 0xff; i += 2)
-		if ((I2CRead(saa, i, 0, 0)) >= 0)
-			attach_inform(saa, i);
-}
-
-static int debiwait_maxwait;
-
-static int wait_for_debi_done(struct saa7146 *saa)
-{
-	int i;
-
-	/* wait for registers to be programmed */
-	for (i = 0; i < 100000 &&
-	     !(saaread(SAA7146_MC2) & SAA7146_MC2_UPLD_DEBI); i++)
-		saaread(SAA7146_MC2);
-	/* wait for transfer to complete */
-	for (i = 0; i < 500000 &&
-	     (saaread(SAA7146_PSR) & SAA7146_PSR_DEBI_S); i++)
-		saaread(SAA7146_MC2);
-
-	if (i > debiwait_maxwait)
-		printk("wait-for-debi-done maxwait: %d\n",
-			debiwait_maxwait = i);
-
-	if (i == 500000)
-		return -1;
-
-	return 0;
-}
-
-static int debiwrite(struct saa7146 *saa, u32 config, int addr,
-	u32 val, int count)
-{
-	u32 cmd;
-	if (count <= 0 || count > 32764)
-		return -1;
-	if (wait_for_debi_done(saa) < 0)
-		return -1;
-	saawrite(config, SAA7146_DEBI_CONFIG);
-	if (count <= 4)		/* immediate transfer */
-		saawrite(val, SAA7146_DEBI_AD);
-	else			/* block transfer */
-		saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD);
-	saawrite((cmd = (count << 17) | (addr & 0xffff)), SAA7146_DEBI_COMMAND);
-	saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI,
-		 SAA7146_MC2);
-	return 0;
-}
-
-static u32 debiread(struct saa7146 *saa, u32 config, int addr, int count)
-{
-	u32 result = 0;
-
-	if (count > 32764 || count <= 0)
-		return 0;
-	if (wait_for_debi_done(saa) < 0)
-		return 0;
-	saawrite(virt_to_bus(saa->dmadebi), SAA7146_DEBI_AD);
-	saawrite((count << 17) | 0x10000 | (addr & 0xffff),
-		 SAA7146_DEBI_COMMAND);
-	saawrite(config, SAA7146_DEBI_CONFIG);
-	saawrite((SAA7146_MC2_UPLD_DEBI << 16) | SAA7146_MC2_UPLD_DEBI,
-		 SAA7146_MC2);
-	if (count > 4)		/* not an immediate transfer */
-		return count;
-	wait_for_debi_done(saa);
-	result = saaread(SAA7146_DEBI_AD);
-	if (count == 1)
-		result &= 0xff;
-	if (count == 2)
-		result &= 0xffff;
-	if (count == 3)
-		result &= 0xffffff;
-	return result;
-}
-
-static void do_irq_send_data(struct saa7146 *saa)
-{
-	int split, audbytes, vidbytes;
-
-	saawrite(SAA7146_PSR_PIN1, SAA7146_IER);
-	/* if special feature mode in effect, disable audio sending */
-	if (saa->playmode != VID_PLAY_NORMAL)
-		saa->audtail = saa->audhead = 0;
-	if (saa->audhead <= saa->audtail)
-		audbytes = saa->audtail - saa->audhead;
-	else
-		audbytes = 65536 - (saa->audhead - saa->audtail);
-	if (saa->vidhead <= saa->vidtail)
-		vidbytes = saa->vidtail - saa->vidhead;
-	else
-		vidbytes = 524288 - (saa->vidhead - saa->vidtail);
-	if (audbytes == 0 && vidbytes == 0 && saa->osdtail == saa->osdhead) {
-		saawrite(0, SAA7146_IER);
-		return;
-	}
-	/* if at least 1 block audio waiting and audio fifo isn't full */
-	if (audbytes >= 2048 && (debiread(saa, debNormal, IBM_MP2_AUD_FIFO, 2)
-			& 0xff) < 60) {
-		if (saa->audhead > saa->audtail)
-			split = 65536 - saa->audhead;
-		else
-			split = 0;
-		audbytes = 2048;
-		if (split > 0 && split < 2048) {
-			memcpy(saa->dmadebi, saa->audbuf + saa->audhead, split);
-			saa->audhead = 0;
-			audbytes -= split;
-		} else
-			split = 0;
-		memcpy(saa->dmadebi + split, saa->audbuf + saa->audhead,
-			audbytes);
-		saa->audhead += audbytes;
-		saa->audhead &= 0xffff;
-		debiwrite(saa, debAudio, (NewCard ? IBM_MP2_AUD_FIFO :
-			IBM_MP2_AUD_FIFOW), 0, 2048);
-		wake_up_interruptible(&saa->audq);
-		/* if at least 1 block video waiting and video fifo isn't full */
-	} else if (vidbytes >= 30720 && (debiread(saa, debNormal,
-						  IBM_MP2_FIFO, 2)) < 16384) {
-		if (saa->vidhead > saa->vidtail)
-			split = 524288 - saa->vidhead;
-		else
-			split = 0;
-		vidbytes = 30720;
-		if (split > 0 && split < 30720) {
-			memcpy(saa->dmadebi, saa->vidbuf + saa->vidhead, split);
-			saa->vidhead = 0;
-			vidbytes -= split;
-		} else
-			split = 0;
-		memcpy(saa->dmadebi + split, saa->vidbuf + saa->vidhead,
-			vidbytes);
-		saa->vidhead += vidbytes;
-		saa->vidhead &= 0x7ffff;
-		debiwrite(saa, debVideo, (NewCard ? IBM_MP2_FIFO :
-					  IBM_MP2_FIFOW), 0, 30720);
-		wake_up_interruptible(&saa->vidq);
-	}
-	saawrite(SAA7146_PSR_DEBI_S | SAA7146_PSR_PIN1, SAA7146_IER);
-}
-
-static void send_osd_data(struct saa7146 *saa)
-{
-	int size = saa->osdtail - saa->osdhead;
-	if (size > 30720)
-		size = 30720;
-	/* ensure some multiple of 8 bytes is transferred */
-	size = 8 * ((size + 8) >> 3);
-	if (size) {
-		debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR,
-			  (saa->osdhead >> 3), 2);
-		memcpy(saa->dmadebi, &saa->osdbuf[saa->osdhead], size);
-		saa->osdhead += size;
-		/* block transfer of next 8 bytes to ~32k bytes */
-		debiwrite(saa, debNormal, IBM_MP2_OSD_DATA, 0, size);
-	}
-	if (saa->osdhead >= saa->osdtail) {
-		saa->osdhead = saa->osdtail = 0;
-		debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
-	}
-}
-
-static irqreturn_t saa7146_irq(int irq, void *dev_id)
-{
-	struct saa7146 *saa = dev_id;
-	u32 stat, astat;
-	int count;
-	int handled = 0;
-
-	count = 0;
-	while (1) {
-		/* get/clear interrupt status bits */
-		stat = saaread(SAA7146_ISR);
-		astat = stat & saaread(SAA7146_IER);
-		if (!astat)
-			break;
-		handled = 1;
-		saawrite(astat, SAA7146_ISR);
-		if (astat & SAA7146_PSR_DEBI_S) {
-			do_irq_send_data(saa);
-		}
-		if (astat & SAA7146_PSR_PIN1) {
-			int istat;
-			/* the following read will trigger DEBI_S */
-			istat = debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
-			if (istat & 1) {
-				saawrite(0, SAA7146_IER);
-				send_osd_data(saa);
-				saawrite(SAA7146_PSR_DEBI_S |
-					 SAA7146_PSR_PIN1, SAA7146_IER);
-			}
-			if (istat & 0x20) {	/* Video Start */
-				saa->vidinfo.frame_count++;
-			}
-			if (istat & 0x400) {	/* Picture Start */
-				/* update temporal reference */
-			}
-			if (istat & 0x200) {	/* Picture Resolution Change */
-				/* read new resolution */
-			}
-			if (istat & 0x100) {	/* New User Data found */
-				/* read new user data */
-			}
-			if (istat & 0x1000) {	/* new GOP/SMPTE */
-				/* read new SMPTE */
-			}
-			if (istat & 0x8000) {	/* Sequence Start Code */
-				/* reset frame counter, load sizes */
-				saa->vidinfo.frame_count = 0;
-				saa->vidinfo.h_size = 704;
-				saa->vidinfo.v_size = 480;
-#if 0
-				if (saa->endmarkhead != saa->endmarktail) {
-					saa->audhead =
-						saa->endmark[saa->endmarkhead];
-					saa->endmarkhead++;
-					if (saa->endmarkhead >= MAX_MARKS)
-						saa->endmarkhead = 0;
-				}
-#endif
-			}
-			if (istat & 0x4000) {	/* Sequence Error Code */
-				if (saa->endmarkhead != saa->endmarktail) {
-					saa->audhead =
-						saa->endmark[saa->endmarkhead];
-					saa->endmarkhead++;
-					if (saa->endmarkhead >= MAX_MARKS)
-						saa->endmarkhead = 0;
-				}
-			}
-		}
-#ifdef IDEBUG
-		if (astat & SAA7146_PSR_PPEF) {
-			IDEBUG(printk("stradis%d irq: PPEF\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_PABO) {
-			IDEBUG(printk("stradis%d irq: PABO\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_PPED) {
-			IDEBUG(printk("stradis%d irq: PPED\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_I1) {
-			IDEBUG(printk("stradis%d irq: RPS_I1\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_I0) {
-			IDEBUG(printk("stradis%d irq: RPS_I0\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_LATE1) {
-			IDEBUG(printk("stradis%d irq: RPS_LATE1\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_LATE0) {
-			IDEBUG(printk("stradis%d irq: RPS_LATE0\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_E1) {
-			IDEBUG(printk("stradis%d irq: RPS_E1\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_E0) {
-			IDEBUG(printk("stradis%d irq: RPS_E0\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_TO1) {
-			IDEBUG(printk("stradis%d irq: RPS_TO1\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_RPS_TO0) {
-			IDEBUG(printk("stradis%d irq: RPS_TO0\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_UPLD) {
-			IDEBUG(printk("stradis%d irq: UPLD\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_DEBI_E) {
-			IDEBUG(printk("stradis%d irq: DEBI_E\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_I2C_S) {
-			IDEBUG(printk("stradis%d irq: I2C_S\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_I2C_E) {
-			IDEBUG(printk("stradis%d irq: I2C_E\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_A2_IN) {
-			IDEBUG(printk("stradis%d irq: A2_IN\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_A2_OUT) {
-			IDEBUG(printk("stradis%d irq: A2_OUT\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_A1_IN) {
-			IDEBUG(printk("stradis%d irq: A1_IN\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_A1_OUT) {
-			IDEBUG(printk("stradis%d irq: A1_OUT\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_AFOU) {
-			IDEBUG(printk("stradis%d irq: AFOU\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_V_PE) {
-			IDEBUG(printk("stradis%d irq: V_PE\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_VFOU) {
-			IDEBUG(printk("stradis%d irq: VFOU\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_FIDA) {
-			IDEBUG(printk("stradis%d irq: FIDA\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_FIDB) {
-			IDEBUG(printk("stradis%d irq: FIDB\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_PIN3) {
-			IDEBUG(printk("stradis%d irq: PIN3\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_PIN2) {
-			IDEBUG(printk("stradis%d irq: PIN2\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_PIN0) {
-			IDEBUG(printk("stradis%d irq: PIN0\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_ECS) {
-			IDEBUG(printk("stradis%d irq: ECS\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_EC3S) {
-			IDEBUG(printk("stradis%d irq: EC3S\n", saa->nr));
-		}
-		if (astat & SAA7146_PSR_EC0S) {
-			IDEBUG(printk("stradis%d irq: EC0S\n", saa->nr));
-		}
-#endif
-		count++;
-		if (count > 15)
-			printk(KERN_WARNING "stradis%d: irq loop %d\n",
-			       saa->nr, count);
-		if (count > 20) {
-			saawrite(0, SAA7146_IER);
-			printk(KERN_ERR
-			       "stradis%d: IRQ loop cleared\n", saa->nr);
-		}
-	}
-	return IRQ_RETVAL(handled);
-}
-
-static int ibm_send_command(struct saa7146 *saa,
-			    int command, int data, int chain)
-{
-	int i;
-
-	if (chain)
-		debiwrite(saa, debNormal, IBM_MP2_COMMAND, (command << 1)| 1,2);
-	else
-		debiwrite(saa, debNormal, IBM_MP2_COMMAND, command << 1, 2);
-	debiwrite(saa, debNormal, IBM_MP2_CMD_DATA, data, 2);
-	debiwrite(saa, debNormal, IBM_MP2_CMD_STAT, 1, 2);
-	for (i = 0; i < 100 &&
-	     (debiread(saa, debNormal, IBM_MP2_CMD_STAT, 2) & 1); i++)
-		schedule();
-	if (i == 100)
-		return -1;
-	return 0;
-}
-
-static void cs4341_setlevel(struct saa7146 *saa, int left, int right)
-{
-	I2CWrite(saa, 0x22, 0x03, left > 94 ? 94 : left, 2);
-	I2CWrite(saa, 0x22, 0x04, right > 94 ? 94 : right, 2);
-}
-
-static void initialize_cs4341(struct saa7146 *saa)
-{
-	int i;
-	for (i = 0; i < 200; i++) {
-		/* auto mute off, power on, no de-emphasis */
-		/* I2S data up to 24-bit 64xFs internal SCLK */
-		I2CWrite(saa, 0x22, 0x01, 0x11, 2);
-		/* ATAPI mixer settings */
-		I2CWrite(saa, 0x22, 0x02, 0x49, 2);
-		/* attenuation left 3db */
-		I2CWrite(saa, 0x22, 0x03, 0x00, 2);
-		/* attenuation right 3db */
-		I2CWrite(saa, 0x22, 0x04, 0x00, 2);
-		I2CWrite(saa, 0x22, 0x01, 0x10, 2);
-		if (I2CRead(saa, 0x22, 0x02, 1) == 0x49)
-			break;
-		schedule();
-	}
-	printk("stradis%d: CS4341 initialized (%d)\n", saa->nr, i);
-	return;
-}
-
-static void initialize_cs8420(struct saa7146 *saa, int pro)
-{
-	int i;
-	u8 *sequence;
-	if (pro)
-		sequence = mode8420pro;
-	else
-		sequence = mode8420con;
-	for (i = 0; i < INIT8420LEN; i++)
-		I2CWrite(saa, 0x20, init8420[i * 2], init8420[i * 2 + 1], 2);
-	for (i = 0; i < MODE8420LEN; i++)
-		I2CWrite(saa, 0x20, sequence[i * 2], sequence[i * 2 + 1], 2);
-	printk("stradis%d: CS8420 initialized\n", saa->nr);
-}
-
-static void initialize_saa7121(struct saa7146 *saa, int dopal)
-{
-	int i, mod;
-	u8 *sequence;
-	if (dopal)
-		sequence = init7121pal;
-	else
-		sequence = init7121ntsc;
-	mod = saaread(SAA7146_PSR) & 0x08;
-	/* initialize PAL/NTSC video encoder */
-	for (i = 0; i < INIT7121LEN; i++) {
-		if (NewCard) {	/* handle new card encoder differences */
-			if (sequence[i * 2] == 0x3a)
-				I2CWrite(saa, 0x88, 0x3a, 0x13, 2);
-			else if (sequence[i * 2] == 0x6b)
-				I2CWrite(saa, 0x88, 0x6b, 0x20, 2);
-			else if (sequence[i * 2] == 0x6c)
-				I2CWrite(saa, 0x88, 0x6c,
-					 dopal ? 0x09 : 0xf5, 2);
-			else if (sequence[i * 2] == 0x6d)
-				I2CWrite(saa, 0x88, 0x6d,
-					 dopal ? 0x20 : 0x00, 2);
-			else if (sequence[i * 2] == 0x7a)
-				I2CWrite(saa, 0x88, 0x7a,
-					 dopal ? (PALFirstActive - 1) :
-					 (NTSCFirstActive - 4), 2);
-			else if (sequence[i * 2] == 0x7b)
-				I2CWrite(saa, 0x88, 0x7b,
-					 dopal ? PALLastActive :
-					 NTSCLastActive, 2);
-			else
-				I2CWrite(saa, 0x88, sequence[i * 2],
-					 sequence[i * 2 + 1], 2);
-		} else {
-			if (sequence[i * 2] == 0x6b && mod)
-				I2CWrite(saa, 0x88, 0x6b,
-					 (sequence[i * 2 + 1] ^ 0x09), 2);
-			else if (sequence[i * 2] == 0x7a)
-				I2CWrite(saa, 0x88, 0x7a,
-					 dopal ? (PALFirstActive - 1) :
-					 (NTSCFirstActive - 4), 2);
-			else if (sequence[i * 2] == 0x7b)
-				I2CWrite(saa, 0x88, 0x7b,
-					 dopal ? PALLastActive :
-					 NTSCLastActive, 2);
-			else
-				I2CWrite(saa, 0x88, sequence[i * 2],
-					 sequence[i * 2 + 1], 2);
-		}
-	}
-}
-
-static void set_genlock_offset(struct saa7146 *saa, int noffset)
-{
-	int nCode;
-	int PixelsPerLine = 858;
-	if (CurrentMode == VIDEO_MODE_PAL)
-		PixelsPerLine = 864;
-	if (noffset > 500)
-		noffset = 500;
-	else if (noffset < -500)
-		noffset = -500;
-	nCode = noffset + 0x100;
-	if (nCode == 1)
-		nCode = 0x401;
-	else if (nCode < 1)
-		nCode = 0x400 + PixelsPerLine + nCode;
-	debiwrite(saa, debNormal, XILINX_GLDELAY, nCode, 2);
-}
-
-static void set_out_format(struct saa7146 *saa, int mode)
-{
-	initialize_saa7121(saa, (mode == VIDEO_MODE_NTSC ? 0 : 1));
-	saa->boardcfg[2] = mode;
-	/* do not adjust analog video parameters here, use saa7121 init */
-	/* you will affect the SDI output on the new card */
-	if (mode == VIDEO_MODE_PAL) {	/* PAL */
-		debiwrite(saa, debNormal, XILINX_CTL0, 0x0808, 2);
-		mdelay(50);
-		saawrite(0x012002c0, SAA7146_NUM_LINE_BYTE1);
-		if (NewCard) {
-			debiwrite(saa, debNormal, IBM_MP2_DISP_MODE, 0xe100, 2);
-			mdelay(50);
-		}
-		debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
-			  NewCard ? 0xe500 : 0x6500, 2);
-		debiwrite(saa, debNormal, IBM_MP2_DISP_DLY,
-			  (1 << 8) |
-			  (NewCard ? PALFirstActive : PALFirstActive - 6), 2);
-	} else {		/* NTSC */
-		debiwrite(saa, debNormal, XILINX_CTL0, 0x0800, 2);
-		mdelay(50);
-		saawrite(0x00f002c0, SAA7146_NUM_LINE_BYTE1);
-		debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
-			  NewCard ? 0xe100 : 0x6100, 2);
-		debiwrite(saa, debNormal, IBM_MP2_DISP_DLY,
-			  (1 << 8) |
-			  (NewCard ? NTSCFirstActive : NTSCFirstActive - 6), 2);
-	}
-}
-
-/* Intialize bitmangler to map from a byte value to the mangled word that
- * must be output to program the Xilinx part through the DEBI port.
- * Xilinx Data Bit->DEBI Bit: 0->15 1->7 2->6 3->12 4->11 5->2 6->1 7->0
- * transfer FPGA code, init IBM chip, transfer IBM microcode
- * rev2 card mangles: 0->7 1->6 2->5 3->4 4->3 5->2 6->1 7->0
- */
-static u16 bitmangler[256];
-
-static int initialize_fpga(struct video_code *bitdata)
-{
-	int i, num, startindex, failure = 0, loadtwo, loadfile = 0;
-	u16 *dmabuf;
-	u8 *newdma;
-	struct saa7146 *saa;
-
-	/* verify fpga code */
-	for (startindex = 0; startindex < bitdata->datasize; startindex++)
-		if (bitdata->data[startindex] == 255)
-			break;
-	if (startindex == bitdata->datasize) {
-		printk(KERN_INFO "stradis: bad fpga code\n");
-		return -1;
-	}
-	/* initialize all detected cards */
-	for (num = 0; num < saa_num; num++) {
-		saa = &saa7146s[num];
-		if (saa->boardcfg[0] > 20)
-			continue;	/* card was programmed */
-		loadtwo = (saa->boardcfg[18] & 0x10);
-		if (!NewCard)	/* we have an old board */
-			for (i = 0; i < 256; i++)
-				bitmangler[i] = ((i & 0x01) << 15) |
-					((i & 0x02) << 6) | ((i & 0x04) << 4) |
-					((i & 0x08) << 9) | ((i & 0x10) << 7) |
-					((i & 0x20) >> 3) | ((i & 0x40) >> 5) |
-					((i & 0x80) >> 7);
-		else		/* else we have a new board */
-			for (i = 0; i < 256; i++)
-				bitmangler[i] = ((i & 0x01) << 7) |
-					((i & 0x02) << 5) | ((i & 0x04) << 3) |
-					((i & 0x08) << 1) | ((i & 0x10) >> 1) |
-					((i & 0x20) >> 3) | ((i & 0x40) >> 5) |
-					((i & 0x80) >> 7);
-
-		dmabuf = (u16 *) saa->dmadebi;
-		newdma = (u8 *) saa->dmadebi;
-		if (NewCard) {	/* SDM2xxx */
-			if (!strncmp(bitdata->loadwhat, "decoder2", 8))
-				continue;	/* fpga not for this card */
-			if (!strncmp(&saa->boardcfg[42], bitdata->loadwhat, 8))
-				loadfile = 1;
-			else if (loadtwo && !strncmp(&saa->boardcfg[19],
-				       bitdata->loadwhat, 8))
-				loadfile = 2;
-			else if (!saa->boardcfg[42] && !strncmp("decxl",
-					bitdata->loadwhat, 8))
-				loadfile = 1;	/* special */
-			else
-				continue;	/* fpga not for this card */
-			if (loadfile != 1 && loadfile != 2)
-				continue;	/* skip to next card */
-			if (saa->boardcfg[0] && loadfile == 1)
-				continue;	/* skip to next card */
-			if (saa->boardcfg[0] != 1 && loadfile == 2)
-				continue;	/* skip to next card */
-			saa->boardcfg[0]++;	/* mark fpga handled */
-			printk("stradis%d: loading %s\n", saa->nr,
-				bitdata->loadwhat);
-			if (loadtwo && loadfile == 2)
-				goto send_fpga_stuff;
-			/* turn on the Audio interface to set PROG low */
-			saawrite(0x00400040, SAA7146_GPIO_CTRL);
-			saaread(SAA7146_PSR);	/* ensure posted write */
-			/* wait for everyone to reset */
-			mdelay(10);
-			saawrite(0x00400000, SAA7146_GPIO_CTRL);
-		} else {	/* original card */
-			if (strncmp(bitdata->loadwhat, "decoder2", 8))
-				continue;	/* fpga not for this card */
-			/* Pull the Xilinx PROG signal WS3 low */
-			saawrite(0x02000200, SAA7146_MC1);
-			/* Turn on the Audio interface so can set PROG low */
-			saawrite(0x000000c0, SAA7146_ACON1);
-			/* Pull the Xilinx INIT signal (GPIO2) low */
-			saawrite(0x00400000, SAA7146_GPIO_CTRL);
-			/* Make sure everybody resets */
-			saaread(SAA7146_PSR);	/* ensure posted write */
-			mdelay(10);
-			/* Release the Xilinx PROG signal */
-			saawrite(0x00000000, SAA7146_ACON1);
-			/* Turn off the Audio interface */
-			saawrite(0x02000000, SAA7146_MC1);
-		}
-		/* Release Xilinx INIT signal (WS2) */
-		saawrite(0x00000000, SAA7146_GPIO_CTRL);
-		/* Wait for the INIT to go High */
-		for (i = 0;
-			i < 10000 && !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2);
-			i++)
-			schedule();
-		if (i == 1000) {
-			printk(KERN_INFO "stradis%d: no fpga INIT\n", saa->nr);
-			return -1;
-		}
-send_fpga_stuff:
-		if (NewCard) {
-			for (i = startindex; i < bitdata->datasize; i++)
-				newdma[i - startindex] =
-				    bitmangler[bitdata->data[i]];
-			debiwrite(saa, 0x01420000, 0, 0,
-				((bitdata->datasize - startindex) + 5));
-			if (loadtwo && loadfile == 1) {
-				printk("stradis%d: awaiting 2nd FPGA bitfile\n",
-				       saa->nr);
-				continue;	/* skip to next card */
-			}
-		} else {
-			for (i = startindex; i < bitdata->datasize; i++)
-				dmabuf[i - startindex] =
-					bitmangler[bitdata->data[i]];
-			debiwrite(saa, 0x014a0000, 0, 0,
-				((bitdata->datasize - startindex) + 5) * 2);
-		}
-		for (i = 0;
-			i < 1000 && !(saaread(SAA7146_PSR) & SAA7146_PSR_PIN2);
-			i++)
-			schedule();
-		if (i == 1000) {
-			printk(KERN_INFO "stradis%d: FPGA load failed\n",
-			       saa->nr);
-			failure++;
-			continue;
-		}
-		if (!NewCard) {
-			/* Pull the Xilinx INIT signal (GPIO2) low */
-			saawrite(0x00400000, SAA7146_GPIO_CTRL);
-			saaread(SAA7146_PSR);	/* ensure posted write */
-			mdelay(2);
-			saawrite(0x00000000, SAA7146_GPIO_CTRL);
-			mdelay(2);
-		}
-		printk(KERN_INFO "stradis%d: FPGA Loaded\n", saa->nr);
-		saa->boardcfg[0] = 26;	/* mark fpga programmed */
-		/* set VXCO to its lowest frequency */
-		debiwrite(saa, debNormal, XILINX_PWM, 0, 2);
-		if (NewCard) {
-			/* mute CS3310 */
-			if (HaveCS3310)
-				debiwrite(saa, debNormal, XILINX_CS3310_CMPLT,
-					0, 2);
-			/* set VXCO to PWM mode, release reset, blank on */
-			debiwrite(saa, debNormal, XILINX_CTL0, 0xffc4, 2);
-			mdelay(10);
-			/* unmute CS3310 */
-			if (HaveCS3310)
-				debiwrite(saa, debNormal, XILINX_CTL0,
-					0x2020, 2);
-		}
-		/* set source Black */
-		debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2);
-		saa->boardcfg[4] = 22;	/* set NTSC First Active Line */
-		saa->boardcfg[5] = 23;	/* set PAL First Active Line */
-		saa->boardcfg[54] = 2;	/* set NTSC Last Active Line - 256 */
-		saa->boardcfg[55] = 54;	/* set PAL Last Active Line - 256 */
-		set_out_format(saa, VIDEO_MODE_NTSC);
-		mdelay(50);
-		/* begin IBM chip init */
-		debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2);
-		saaread(SAA7146_PSR);	/* wait for reset */
-		mdelay(5);
-		debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2);
-		debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2);
-		debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0x10, 2);
-		debiwrite(saa, debNormal, IBM_MP2_CMD_ADDR, 0, 2);
-		debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2);
-		if (NewCard) {
-			mdelay(5);
-			/* set i2s rate converter to 48KHz */
-			debiwrite(saa, debNormal, 0x80c0, 6, 2);
-			/* we must init CS8420 first since rev b pulls i2s */
-			/* master clock low and CS4341 needs i2s master to */
-			/* run the i2c port. */
-			if (HaveCS8420)
-				/* 0=consumer, 1=pro */
-				initialize_cs8420(saa, 0);
-
-			mdelay(5);
-			if (HaveCS4341)
-				initialize_cs4341(saa);
-		}
-		debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2);
-		debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2);
-		debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2);
-		debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2);
-		if (NewCard)
-			set_genlock_offset(saa, 0);
-		debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2);
-#if 0
-		/* enable genlock */
-		debiwrite(saa, debNormal, XILINX_CTL0, 0x8000, 2);
-#else
-		/* disable genlock */
-		debiwrite(saa, debNormal, XILINX_CTL0, 0x8080, 2);
-#endif
-	}
-
-	return failure;
-}
-
-static int do_ibm_reset(struct saa7146 *saa)
-{
-	/* failure if decoder not previously programmed */
-	if (saa->boardcfg[0] < 37)
-		return -EIO;
-	/* mute CS3310 */
-	if (HaveCS3310)
-		debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, 0, 2);
-	/* disable interrupts */
-	saawrite(0, SAA7146_IER);
-	saa->audhead = saa->audtail = 0;
-	saa->vidhead = saa->vidtail = 0;
-	/* tristate debi bus, disable debi transfers */
-	saawrite(0x00880000, SAA7146_MC1);
-	/* ensure posted write */
-	saaread(SAA7146_MC1);
-	mdelay(50);
-	/* re-enable debi transfers */
-	saawrite(0x00880088, SAA7146_MC1);
-	/* set source Black */
-	debiwrite(saa, debNormal, XILINX_CTL0, 0x1707, 2);
-	/* begin IBM chip init */
-	set_out_format(saa, CurrentMode);
-	debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 4, 2);
-	saaread(SAA7146_PSR);	/* wait for reset */
-	mdelay(5);
-	debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, 0, 2);
-	debiread(saa, debNormal, IBM_MP2_CHIP_CONTROL, 2);
-	debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2);
-	debiwrite(saa, debNormal, IBM_MP2_CHIP_MODE, 0x2e, 2);
-	if (NewCard) {
-		mdelay(5);
-		/* set i2s rate converter to 48KHz */
-		debiwrite(saa, debNormal, 0x80c0, 6, 2);
-		/* we must init CS8420 first since rev b pulls i2s */
-		/* master clock low and CS4341 needs i2s master to */
-		/* run the i2c port. */
-		if (HaveCS8420)
-			/* 0=consumer, 1=pro */
-			initialize_cs8420(saa, 1);
-
-		mdelay(5);
-		if (HaveCS4341)
-			initialize_cs4341(saa);
-	}
-	debiwrite(saa, debNormal, IBM_MP2_INFC_CTL, 0x48, 2);
-	debiwrite(saa, debNormal, IBM_MP2_BEEP_CTL, 0xa000, 2);
-	debiwrite(saa, debNormal, IBM_MP2_DISP_LBOR, 0, 2);
-	debiwrite(saa, debNormal, IBM_MP2_DISP_TBOR, 0, 2);
-	if (NewCard)
-		set_genlock_offset(saa, 0);
-	debiwrite(saa, debNormal, IBM_MP2_FRNT_ATTEN, 0, 2);
-	debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2);
-	debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2);
-	if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER,
-			(ChipControl == 0x43 ? 0xe800 : 0xe000), 1)) {
-		printk(KERN_ERR "stradis%d: IBM config failed\n", saa->nr);
-	}
-	if (HaveCS3310) {
-		int i = CS3310MaxLvl;
-		debiwrite(saa, debNormal, XILINX_CS3310_CMPLT, ((i << 8)| i),2);
-	}
-	/* start video decoder */
-	debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL, ChipControl, 2);
-	/* 256k vid, 3520 bytes aud */
-	debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, 0x4037, 2);
-	debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2);
-	ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
-	/* enable buffer threshold irq */
-	debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
-	/* clear pending interrupts */
-	debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
-	debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2);
-
-	return 0;
-}
-
-/* load the decoder microcode */
-static int initialize_ibmmpeg2(struct video_code *microcode)
-{
-	int i, num;
-	struct saa7146 *saa;
-
-	for (num = 0; num < saa_num; num++) {
-		saa = &saa7146s[num];
-		/* check that FPGA is loaded */
-		debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0xa55a, 2);
-		i = debiread(saa, debNormal, IBM_MP2_OSD_SIZE, 2);
-		if (i != 0xa55a) {
-			printk(KERN_INFO "stradis%d: %04x != 0xa55a\n",
-				saa->nr, i);
-#if 0
-			return -1;
-#endif
-		}
-		if (!strncmp(microcode->loadwhat, "decoder.vid", 11)) {
-			if (saa->boardcfg[0] > 27)
-				continue;	/* skip to next card */
-			/* load video control store */
-			saa->boardcfg[1] = 0x13;	/* no-sync default */
-			debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2);
-			debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2);
-			for (i = 0; i < microcode->datasize / 2; i++)
-				debiwrite(saa, debNormal, IBM_MP2_PROC_IDATA,
-					(microcode->data[i * 2] << 8) |
-					microcode->data[i * 2 + 1], 2);
-			debiwrite(saa, debNormal, IBM_MP2_PROC_IADDR, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
-				ChipControl, 2);
-			saa->boardcfg[0] = 28;
-		}
-		if (!strncmp(microcode->loadwhat, "decoder.aud", 11)) {
-			if (saa->boardcfg[0] > 35)
-				continue;	/* skip to next card */
-			/* load audio control store */
-			debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 1, 2);
-			debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2);
-			for (i = 0; i < microcode->datasize; i++)
-				debiwrite(saa, debNormal, IBM_MP2_AUD_IDATA,
-					microcode->data[i], 1);
-			debiwrite(saa, debNormal, IBM_MP2_AUD_IADDR, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_WR_PROT, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_OSD_SIZE, 0x2000, 2);
-			debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4552, 2);
-			if (ibm_send_command(saa, IBM_MP2_CONFIG_DECODER,
-					0xe000, 1)) {
-				printk(KERN_ERR "stradis%d: IBM config "
-					"failed\n", saa->nr);
-				return -1;
-			}
-			/* set PWM to center value */
-			if (NewCard) {
-				debiwrite(saa, debNormal, XILINX_PWM,
-					saa->boardcfg[14] +
-					(saa->boardcfg[13] << 8), 2);
-			} else
-				debiwrite(saa, debNormal, XILINX_PWM, 0x46, 2);
-
-			if (HaveCS3310) {
-				i = CS3310MaxLvl;
-				debiwrite(saa, debNormal, XILINX_CS3310_CMPLT,
-					(i << 8) | i, 2);
-			}
-			printk(KERN_INFO "stradis%d: IBM MPEGCD%d Inited\n",
-				saa->nr, 18 + (debiread(saa, debNormal,
-				IBM_MP2_CHIP_CONTROL, 2) >> 12));
-			/* start video decoder */
-			debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
-				ChipControl, 2);
-			debiwrite(saa, debNormal, IBM_MP2_RB_THRESHOLD, 0x4037,
-				2);	/* 256k vid, 3520 bytes aud */
-			debiwrite(saa, debNormal, IBM_MP2_AUD_CTL, 0x4573, 2);
-			ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
-			/* enable buffer threshold irq */
-			debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00c, 2);
-			debiread(saa, debNormal, IBM_MP2_HOST_INT, 2);
-			/* enable gpio irq */
-			saawrite(0x00002000, SAA7146_GPIO_CTRL);
-			/* enable decoder output to HPS */
-			debiwrite(saa, debNormal, XILINX_CTL0, 0x1711, 2);
-			saa->boardcfg[0] = 37;
-		}
-	}
-
-	return 0;
-}
-
-static u32 palette2fmt[] = {	/* some of these YUV translations are wrong */
-	0xffffffff, 0x86000000, 0x87000000, 0x80000000, 0x8100000, 0x82000000,
-	0x83000000, 0x00000000, 0x03000000, 0x03000000, 0x0a00000, 0x03000000,
-	0x06000000, 0x00000000, 0x03000000, 0x0a000000, 0x0300000
-};
-static int bpp2fmt[4] = {
-	VIDEO_PALETTE_HI240, VIDEO_PALETTE_RGB565, VIDEO_PALETTE_RGB24,
-	VIDEO_PALETTE_RGB32
-};
-
-/* I wish I could find a formula to calculate these... */
-static u32 h_prescale[64] = {
-	0x10000000, 0x18040202, 0x18080000, 0x380c0606, 0x38100204, 0x38140808,
-	0x38180000, 0x381c0000, 0x3820161c, 0x38242a3b, 0x38281230, 0x382c4460,
-	0x38301040, 0x38340080, 0x38380000, 0x383c0000, 0x3840fefe, 0x3844ee9f,
-	0x3848ee9f, 0x384cee9f, 0x3850ee9f, 0x38542a3b, 0x38581230, 0x385c0000,
-	0x38600000, 0x38640000, 0x38680000, 0x386c0000, 0x38700000, 0x38740000,
-	0x38780000, 0x387c0000, 0x30800000, 0x38840000, 0x38880000, 0x388c0000,
-	0x38900000, 0x38940000, 0x38980000, 0x389c0000, 0x38a00000, 0x38a40000,
-	0x38a80000, 0x38ac0000, 0x38b00000, 0x38b40000, 0x38b80000, 0x38bc0000,
-	0x38c00000, 0x38c40000, 0x38c80000, 0x38cc0000, 0x38d00000, 0x38d40000,
-	0x38d80000, 0x38dc0000, 0x38e00000, 0x38e40000, 0x38e80000, 0x38ec0000,
-	0x38f00000, 0x38f40000, 0x38f80000, 0x38fc0000,
-};
-static u32 v_gain[64] = {
-	0x016000ff, 0x016100ff, 0x016100ff, 0x016200ff, 0x016200ff, 0x016200ff,
-	0x016200ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff, 0x016300ff,
-	0x016300ff, 0x016300ff, 0x016300ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-	0x016400ff, 0x016400ff, 0x016400ff, 0x016400ff,
-};
-
-static void saa7146_set_winsize(struct saa7146 *saa)
-{
-	u32 format;
-	int offset, yacl, ysci;
-	saa->win.color_fmt = format =
-	    (saa->win.depth == 15) ? palette2fmt[VIDEO_PALETTE_RGB555] :
-	    palette2fmt[bpp2fmt[(saa->win.bpp - 1) & 3]];
-	offset = saa->win.x * saa->win.bpp + saa->win.y * saa->win.bpl;
-	saawrite(saa->win.vidadr + offset, SAA7146_BASE_EVEN1);
-	saawrite(saa->win.vidadr + offset + saa->win.bpl, SAA7146_BASE_ODD1);
-	saawrite(saa->win.bpl * 2, SAA7146_PITCH1);
-	saawrite(saa->win.vidadr + saa->win.bpl * saa->win.sheight,
-		 SAA7146_PROT_ADDR1);
-	saawrite(0, SAA7146_PAGE1);
-	saawrite(format | 0x60, SAA7146_CLIP_FORMAT_CTRL);
-	offset = (704 / (saa->win.width - 1)) & 0x3f;
-	saawrite(h_prescale[offset], SAA7146_HPS_H_PRESCALE);
-	offset = (720896 / saa->win.width) / (offset + 1);
-	saawrite((offset << 12) | 0x0c, SAA7146_HPS_H_SCALE);
-	if (CurrentMode == VIDEO_MODE_NTSC) {
-		yacl = /*(480 / saa->win.height - 1) & 0x3f */ 0;
-		ysci = 1024 - (saa->win.height * 1024 / 480);
-	} else {
-		yacl = /*(576 / saa->win.height - 1) & 0x3f */ 0;
-		ysci = 1024 - (saa->win.height * 1024 / 576);
-	}
-	saawrite((1 << 31) | (ysci << 21) | (yacl << 15), SAA7146_HPS_V_SCALE);
-	saawrite(v_gain[yacl], SAA7146_HPS_V_GAIN);
-	saawrite(((SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_HPS_V |
-		SAA7146_MC2_UPLD_HPS_H) << 16) | (SAA7146_MC2_UPLD_DMA1 |
-		SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_HPS_H), SAA7146_MC2);
-}
-
-/* clip_draw_rectangle(cm,x,y,w,h) -- handle clipping an area
- * bitmap is fixed width, 128 bytes (1024 pixels represented)
- * arranged most-sigificant-bit-left in 32-bit words
- * based on saa7146 clipping hardware, it swaps bytes if LE
- * much of this makes up for egcs brain damage -- so if you
- * are wondering "why did he do this?" it is because the C
- * was adjusted to generate the optimal asm output without
- * writing non-portable __asm__ directives.
- */
-
-static void clip_draw_rectangle(u32 *clipmap, int x, int y, int w, int h)
-{
-	register int startword, endword;
-	register u32 bitsleft, bitsright;
-	u32 *temp;
-	if (x < 0) {
-		w += x;
-		x = 0;
-	}
-	if (y < 0) {
-		h += y;
-		y = 0;
-	}
-	if (w <= 0 || h <= 0 || x > 1023 || y > 639)
-		return;		/* throw away bad clips */
-	if (x + w > 1024)
-		w = 1024 - x;
-	if (y + h > 640)
-		h = 640 - y;
-	startword = (x >> 5);
-	endword = ((x + w) >> 5);
-	bitsleft = (0xffffffff >> (x & 31));
-	bitsright = (0xffffffff << (~((x + w) - (endword << 5))));
-	temp = &clipmap[(y << 5) + startword];
-	w = endword - startword;
-	if (!w) {
-		bitsleft |= bitsright;
-		for (y = 0; y < h; y++) {
-			*temp |= bitsleft;
-			temp += 32;
-		}
-	} else {
-		for (y = 0; y < h; y++) {
-			*temp++ |= bitsleft;
-			for (x = 1; x < w; x++)
-				*temp++ = 0xffffffff;
-			*temp |= bitsright;
-			temp += (32 - w);
-		}
-	}
-}
-
-static void make_clip_tab(struct saa7146 *saa, struct video_clip *cr, int ncr)
-{
-	int i, width, height;
-	u32 *clipmap;
-
-	clipmap = saa->dmavid2;
-	if ((width = saa->win.width) > 1023)
-		width = 1023;	/* sanity check */
-	if ((height = saa->win.height) > 640)
-		height = 639;	/* sanity check */
-	if (ncr > 0) {		/* rectangles pased */
-		/* convert rectangular clips to a bitmap */
-		memset(clipmap, 0, VIDEO_CLIPMAP_SIZE);	/* clear map */
-		for (i = 0; i < ncr; i++)
-			clip_draw_rectangle(clipmap, cr[i].x, cr[i].y,
-				cr[i].width, cr[i].height);
-	}
-	/* clip against viewing window AND screen
-	   so we do not have to rely on the user program
-	 */
-	clip_draw_rectangle(clipmap, (saa->win.x + width > saa->win.swidth) ?
-		(saa->win.swidth - saa->win.x) : width, 0, 1024, 768);
-	clip_draw_rectangle(clipmap, 0,
-		(saa->win.y + height > saa->win.sheight) ?
-		(saa->win.sheight - saa->win.y) : height, 1024, 768);
-	if (saa->win.x < 0)
-		clip_draw_rectangle(clipmap, 0, 0, -saa->win.x, 768);
-	if (saa->win.y < 0)
-		clip_draw_rectangle(clipmap, 0, 0, 1024, -saa->win.y);
-}
-
-static long saa_ioctl(struct file *file,
-		     unsigned int cmd, unsigned long argl)
-{
-	struct saa7146 *saa = file->private_data;
-	void __user *arg = (void __user *)argl;
-
-	switch (cmd) {
-	case VIDIOCGCAP:
-		{
-			struct video_capability b;
-			strcpy(b.name, saa->video_dev.name);
-			b.type = VID_TYPE_CAPTURE | VID_TYPE_OVERLAY |
-				VID_TYPE_CLIPPING | VID_TYPE_FRAMERAM |
-				VID_TYPE_SCALES;
-			b.channels = 1;
-			b.audios = 1;
-			b.maxwidth = 768;
-			b.maxheight = 576;
-			b.minwidth = 32;
-			b.minheight = 32;
-			if (copy_to_user(arg, &b, sizeof(b)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCGPICT:
-		{
-			struct video_picture p = saa->picture;
-			if (saa->win.depth == 8)
-				p.palette = VIDEO_PALETTE_HI240;
-			if (saa->win.depth == 15)
-				p.palette = VIDEO_PALETTE_RGB555;
-			if (saa->win.depth == 16)
-				p.palette = VIDEO_PALETTE_RGB565;
-			if (saa->win.depth == 24)
-				p.palette = VIDEO_PALETTE_RGB24;
-			if (saa->win.depth == 32)
-				p.palette = VIDEO_PALETTE_RGB32;
-			if (copy_to_user(arg, &p, sizeof(p)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCSPICT:
-		{
-			struct video_picture p;
-			u32 format;
-			if (copy_from_user(&p, arg, sizeof(p)))
-				return -EFAULT;
-			if (p.palette < ARRAY_SIZE(palette2fmt)) {
-				format = palette2fmt[p.palette];
-				saa->win.color_fmt = format;
-				saawrite(format | 0x60,
-					SAA7146_CLIP_FORMAT_CTRL);
-			}
-			saawrite(((p.brightness & 0xff00) << 16) |
-				((p.contrast & 0xfe00) << 7) |
-				((p.colour & 0xfe00) >> 9), SAA7146_BCS_CTRL);
-			saa->picture = p;
-			/* upload changed registers */
-			saawrite(((SAA7146_MC2_UPLD_HPS_H |
-				SAA7146_MC2_UPLD_HPS_V) << 16) |
-				SAA7146_MC2_UPLD_HPS_H |
-				SAA7146_MC2_UPLD_HPS_V, SAA7146_MC2);
-			return 0;
-		}
-	case VIDIOCSWIN:
-		{
-			struct video_window vw;
-			struct video_clip *vcp = NULL;
-
-			if (copy_from_user(&vw, arg, sizeof(vw)))
-				return -EFAULT;
-
-			/* stop capture */
-			if (vw.flags || vw.width < 16 || vw.height < 16) {
-				saawrite((SAA7146_MC1_TR_E_1 << 16),
-					SAA7146_MC1);
-				return -EINVAL;
-			}
-			/* 32-bit align start and adjust width */
-			if (saa->win.bpp < 4) {
-				int i = vw.x;
-				vw.x = (vw.x + 3) & ~3;
-				i = vw.x - i;
-				vw.width -= i;
-			}
-			saa->win.x = vw.x;
-			saa->win.y = vw.y;
-			saa->win.width = vw.width;
-			if (saa->win.width > 768)
-				saa->win.width = 768;
-			saa->win.height = vw.height;
-			if (CurrentMode == VIDEO_MODE_NTSC) {
-				if (saa->win.height > 480)
-					saa->win.height = 480;
-			} else {
-				if (saa->win.height > 576)
-					saa->win.height = 576;
-			}
-
-			/* stop capture */
-			saawrite((SAA7146_MC1_TR_E_1 << 16), SAA7146_MC1);
-			saa7146_set_winsize(saa);
-
-			/*
-			 *    Do any clips.
-			 */
-			if (vw.clipcount < 0) {
-				if (copy_from_user(saa->dmavid2, vw.clips,
-						VIDEO_CLIPMAP_SIZE))
-					return -EFAULT;
-			} else if (vw.clipcount > 16384) {
-				return -EINVAL;
-			} else if (vw.clipcount > 0) {
-				vcp = vmalloc(sizeof(struct video_clip) *
-					vw.clipcount);
-				if (vcp == NULL)
-					return -ENOMEM;
-				if (copy_from_user(vcp, vw.clips,
-						sizeof(struct video_clip) *
-						vw.clipcount)) {
-					vfree(vcp);
-					return -EFAULT;
-				}
-			} else	/* nothing clipped */
-				memset(saa->dmavid2, 0, VIDEO_CLIPMAP_SIZE);
-
-			make_clip_tab(saa, vcp, vw.clipcount);
-			if (vw.clipcount > 0)
-				vfree(vcp);
-
-			/* start capture & clip dma if we have an address */
-			if ((saa->cap & 3) && saa->win.vidadr != 0)
-				saawrite(((SAA7146_MC1_TR_E_1 |
-					SAA7146_MC1_TR_E_2) << 16) | 0xffff,
-					SAA7146_MC1);
-			return 0;
-		}
-	case VIDIOCGWIN:
-		{
-			struct video_window vw;
-			vw.x = saa->win.x;
-			vw.y = saa->win.y;
-			vw.width = saa->win.width;
-			vw.height = saa->win.height;
-			vw.chromakey = 0;
-			vw.flags = 0;
-			if (copy_to_user(arg, &vw, sizeof(vw)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCCAPTURE:
-		{
-			int v;
-			if (copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-			if (v == 0) {
-				saa->cap &= ~1;
-				saawrite((SAA7146_MC1_TR_E_1 << 16),
-					SAA7146_MC1);
-			} else {
-				if (saa->win.vidadr == 0 || saa->win.width == 0
-						|| saa->win.height == 0)
-					return -EINVAL;
-				saa->cap |= 1;
-				saawrite((SAA7146_MC1_TR_E_1 << 16) | 0xffff,
-					SAA7146_MC1);
-			}
-			return 0;
-		}
-	case VIDIOCGFBUF:
-		{
-			struct video_buffer v;
-			v.base = (void *)saa->win.vidadr;
-			v.height = saa->win.sheight;
-			v.width = saa->win.swidth;
-			v.depth = saa->win.depth;
-			v.bytesperline = saa->win.bpl;
-			if (copy_to_user(arg, &v, sizeof(v)))
-				return -EFAULT;
-			return 0;
-
-		}
-	case VIDIOCSFBUF:
-		{
-			struct video_buffer v;
-			if (!capable(CAP_SYS_ADMIN))
-				return -EPERM;
-			if (copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-			if (v.depth != 8 && v.depth != 15 && v.depth != 16 &&
-			    v.depth != 24 && v.depth != 32 && v.width > 16 &&
-			    v.height > 16 && v.bytesperline > 16)
-				return -EINVAL;
-			if (v.base)
-				saa->win.vidadr = (unsigned long)v.base;
-			saa->win.sheight = v.height;
-			saa->win.swidth = v.width;
-			saa->win.bpp = ((v.depth + 7) & 0x38) / 8;
-			saa->win.depth = v.depth;
-			saa->win.bpl = v.bytesperline;
-
-			DEBUG(printk("Display at %p is %d by %d, bytedepth %d, "
-					"bpl %d\n", v.base, v.width, v.height,
-					saa->win.bpp, saa->win.bpl));
-			saa7146_set_winsize(saa);
-			return 0;
-		}
-	case VIDIOCKEY:
-		{
-			/* Will be handled higher up .. */
-			return 0;
-		}
-
-	case VIDIOCGAUDIO:
-		{
-			struct video_audio v;
-			v = saa->audio_dev;
-			v.flags &= ~(VIDEO_AUDIO_MUTE | VIDEO_AUDIO_MUTABLE);
-			v.flags |= VIDEO_AUDIO_MUTABLE | VIDEO_AUDIO_VOLUME;
-			strcpy(v.name, "MPEG");
-			v.mode = VIDEO_SOUND_STEREO;
-			if (copy_to_user(arg, &v, sizeof(v)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCSAUDIO:
-		{
-			struct video_audio v;
-			int i;
-			if (copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-			i = (~(v.volume >> 8)) & 0xff;
-			if (!HaveCS4341) {
-				if (v.flags & VIDEO_AUDIO_MUTE)
-					debiwrite(saa, debNormal,
-						IBM_MP2_FRNT_ATTEN, 0xffff, 2);
-				if (!(v.flags & VIDEO_AUDIO_MUTE))
-					debiwrite(saa, debNormal,
-						IBM_MP2_FRNT_ATTEN, 0x0000, 2);
-				if (v.flags & VIDEO_AUDIO_VOLUME)
-					debiwrite(saa, debNormal,
-						IBM_MP2_FRNT_ATTEN,
-						(i << 8) | i, 2);
-			} else {
-				if (v.flags & VIDEO_AUDIO_MUTE)
-					cs4341_setlevel(saa, 0xff, 0xff);
-				if (!(v.flags & VIDEO_AUDIO_MUTE))
-					cs4341_setlevel(saa, 0, 0);
-				if (v.flags & VIDEO_AUDIO_VOLUME)
-					cs4341_setlevel(saa, i, i);
-			}
-			saa->audio_dev = v;
-			return 0;
-		}
-
-	case VIDIOCGUNIT:
-		{
-			struct video_unit vu;
-			vu.video = saa->video_dev.minor;
-			vu.vbi = VIDEO_NO_UNIT;
-			vu.radio = VIDEO_NO_UNIT;
-			vu.audio = VIDEO_NO_UNIT;
-			vu.teletext = VIDEO_NO_UNIT;
-			if (copy_to_user(arg, &vu, sizeof(vu)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCSPLAYMODE:
-		{
-			struct video_play_mode pmode;
-			if (copy_from_user((void *)&pmode, arg,
-					sizeof(struct video_play_mode)))
-				return -EFAULT;
-			switch (pmode.mode) {
-			case VID_PLAY_VID_OUT_MODE:
-				if (pmode.p1 != VIDEO_MODE_NTSC &&
-						pmode.p1 != VIDEO_MODE_PAL)
-					return -EINVAL;
-				set_out_format(saa, pmode.p1);
-				return 0;
-			case VID_PLAY_GENLOCK:
-				debiwrite(saa, debNormal, XILINX_CTL0,
-					pmode.p1 ? 0x8000 : 0x8080, 2);
-				if (NewCard)
-					set_genlock_offset(saa, pmode.p2);
-				return 0;
-			case VID_PLAY_NORMAL:
-				debiwrite(saa, debNormal,
-					IBM_MP2_CHIP_CONTROL, ChipControl, 2);
-				ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_PAUSE:
-				/* IBM removed the PAUSE command */
-				/* they say use SINGLE_FRAME now */
-			case VID_PLAY_SINGLE_FRAME:
-				ibm_send_command(saa, IBM_MP2_SINGLE_FRAME,0,0);
-				if (saa->playmode == pmode.mode) {
-					debiwrite(saa, debNormal,
-						IBM_MP2_CHIP_CONTROL,
-						ChipControl, 2);
-				}
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_FAST_FORWARD:
-				ibm_send_command(saa, IBM_MP2_FAST_FORWARD,0,0);
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_SLOW_MOTION:
-				ibm_send_command(saa, IBM_MP2_SLOW_MOTION,
-					pmode.p1, 0);
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_IMMEDIATE_NORMAL:
-				/* ensure transfers resume */
-				debiwrite(saa, debNormal,
-					IBM_MP2_CHIP_CONTROL, ChipControl, 2);
-				ibm_send_command(saa, IBM_MP2_IMED_NORM_PLAY,
-					0, 0);
-				saa->playmode = VID_PLAY_NORMAL;
-				return 0;
-			case VID_PLAY_SWITCH_CHANNELS:
-				saa->audhead = saa->audtail = 0;
-				saa->vidhead = saa->vidtail = 0;
-				ibm_send_command(saa, IBM_MP2_FREEZE_FRAME,0,1);
-				ibm_send_command(saa, IBM_MP2_RESET_AUD_RATE,
-					0, 1);
-				debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
-					0, 2);
-				ibm_send_command(saa, IBM_MP2_CHANNEL_SWITCH,
-					0, 1);
-				debiwrite(saa, debNormal, IBM_MP2_CHIP_CONTROL,
-					ChipControl, 2);
-				ibm_send_command(saa, IBM_MP2_PLAY, 0, 0);
-				saa->playmode = VID_PLAY_NORMAL;
-				return 0;
-			case VID_PLAY_FREEZE_FRAME:
-				ibm_send_command(saa, IBM_MP2_FREEZE_FRAME,0,0);
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_STILL_MODE:
-				ibm_send_command(saa, IBM_MP2_SET_STILL_MODE,
-					0, 0);
-				saa->playmode = pmode.mode;
-				return 0;
-			case VID_PLAY_MASTER_MODE:
-				if (pmode.p1 == VID_PLAY_MASTER_NONE)
-					saa->boardcfg[1] = 0x13;
-				else if (pmode.p1 == VID_PLAY_MASTER_VIDEO)
-					saa->boardcfg[1] = 0x23;
-				else if (pmode.p1 == VID_PLAY_MASTER_AUDIO)
-					saa->boardcfg[1] = 0x43;
-				else
-					return -EINVAL;
-				debiwrite(saa, debNormal,
-					  IBM_MP2_CHIP_CONTROL, ChipControl, 2);
-				return 0;
-			case VID_PLAY_ACTIVE_SCANLINES:
-				if (CurrentMode == VIDEO_MODE_PAL) {
-					if (pmode.p1 < 1 || pmode.p2 > 625)
-						return -EINVAL;
-					saa->boardcfg[5] = pmode.p1;
-					saa->boardcfg[55] = (pmode.p1 +
-						(pmode.p2 / 2) - 1) & 0xff;
-				} else {
-					if (pmode.p1 < 4 || pmode.p2 > 525)
-						return -EINVAL;
-					saa->boardcfg[4] = pmode.p1;
-					saa->boardcfg[54] = (pmode.p1 +
-						(pmode.p2 / 2) - 4) & 0xff;
-				}
-				set_out_format(saa, CurrentMode);
-			case VID_PLAY_RESET:
-				return do_ibm_reset(saa);
-			case VID_PLAY_END_MARK:
-				if (saa->endmarktail < saa->endmarkhead) {
-					if (saa->endmarkhead -
-							saa->endmarktail < 2)
-						return -ENOSPC;
-				} else if (saa->endmarkhead <=saa->endmarktail){
-					if (saa->endmarktail - saa->endmarkhead
-							> (MAX_MARKS - 2))
-						return -ENOSPC;
-				} else
-					return -ENOSPC;
-				saa->endmark[saa->endmarktail] = saa->audtail;
-				saa->endmarktail++;
-				if (saa->endmarktail >= MAX_MARKS)
-					saa->endmarktail = 0;
-			}
-			return -EINVAL;
-		}
-	case VIDIOCSWRITEMODE:
-		{
-			int mode;
-			if (copy_from_user((void *)&mode, arg, sizeof(int)))
-				return -EFAULT;
-			if (mode == VID_WRITE_MPEG_AUD ||
-					mode == VID_WRITE_MPEG_VID ||
-					mode == VID_WRITE_CC ||
-					mode == VID_WRITE_TTX ||
-					mode == VID_WRITE_OSD) {
-				saa->writemode = mode;
-				return 0;
-			}
-			return -EINVAL;
-		}
-	case VIDIOCSMICROCODE:
-		{
-			struct video_code ucode;
-			__u8 *udata;
-			int i;
-			if (copy_from_user(&ucode, arg, sizeof(ucode)))
-				return -EFAULT;
-			if (ucode.datasize > 65536 || ucode.datasize < 1024 ||
-					strncmp(ucode.loadwhat, "dec", 3))
-				return -EINVAL;
-			if ((udata = vmalloc(ucode.datasize)) == NULL)
-				return -ENOMEM;
-			if (copy_from_user(udata, ucode.data, ucode.datasize)) {
-				vfree(udata);
-				return -EFAULT;
-			}
-			ucode.data = udata;
-			if (!strncmp(ucode.loadwhat, "decoder.aud", 11) ||
-				!strncmp(ucode.loadwhat, "decoder.vid", 11))
-				i = initialize_ibmmpeg2(&ucode);
-			else
-				i = initialize_fpga(&ucode);
-			vfree(udata);
-			if (i)
-				return -EINVAL;
-			return 0;
-
-		}
-	case VIDIOCGCHAN:	/* this makes xawtv happy */
-		{
-			struct video_channel v;
-			if (copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-			v.flags = VIDEO_VC_AUDIO;
-			v.tuners = 0;
-			v.type = VID_TYPE_MPEG_DECODER;
-			v.norm = CurrentMode;
-			strcpy(v.name, "MPEG2");
-			if (copy_to_user(arg, &v, sizeof(v)))
-				return -EFAULT;
-			return 0;
-		}
-	case VIDIOCSCHAN:	/* this makes xawtv happy */
-		{
-			struct video_channel v;
-			if (copy_from_user(&v, arg, sizeof(v)))
-				return -EFAULT;
-			/* do nothing */
-			return 0;
-		}
-	default:
-		return -ENOIOCTLCMD;
-	}
-	return 0;
-}
-
-static int saa_mmap(struct file *file, struct vm_area_struct *vma)
-{
-	struct saa7146 *saa = file->private_data;
-	printk(KERN_DEBUG "stradis%d: saa_mmap called\n", saa->nr);
-	return -EINVAL;
-}
-
-static ssize_t saa_read(struct file *file, char __user * buf,
-	size_t count, loff_t * ppos)
-{
-	return -EINVAL;
-}
-
-static ssize_t saa_write(struct file *file, const char __user * buf,
-	size_t count, loff_t * ppos)
-{
-	struct saa7146 *saa = file->private_data;
-	unsigned long todo = count;
-	int blocksize, split;
-	unsigned long flags;
-
-	while (todo > 0) {
-		if (saa->writemode == VID_WRITE_MPEG_AUD) {
-			spin_lock_irqsave(&saa->lock, flags);
-			if (saa->audhead <= saa->audtail)
-				blocksize = 65536 -
-					(saa->audtail - saa->audhead);
-			else
-				blocksize = saa->audhead - saa->audtail;
-			spin_unlock_irqrestore(&saa->lock, flags);
-			if (blocksize < 16384) {
-				saawrite(SAA7146_PSR_DEBI_S |
-					SAA7146_PSR_PIN1, SAA7146_IER);
-				saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
-				/* wait for buffer space to open */
-				interruptible_sleep_on(&saa->audq);
-			}
-			spin_lock_irqsave(&saa->lock, flags);
-			if (saa->audhead <= saa->audtail) {
-				blocksize = 65536 -
-					(saa->audtail - saa->audhead);
-				split = 65536 - saa->audtail;
-			} else {
-				blocksize = saa->audhead - saa->audtail;
-				split = 65536;
-			}
-			spin_unlock_irqrestore(&saa->lock, flags);
-			blocksize--;
-			if (blocksize > todo)
-				blocksize = todo;
-			/* double check that we really have space */
-			if (!blocksize)
-				return -ENOSPC;
-			if (split < blocksize) {
-				if (copy_from_user(saa->audbuf +
-						saa->audtail, buf, split))
-					return -EFAULT;
-				buf += split;
-				todo -= split;
-				blocksize -= split;
-				saa->audtail = 0;
-			}
-			if (copy_from_user(saa->audbuf + saa->audtail, buf,
-					blocksize))
-				return -EFAULT;
-			saa->audtail += blocksize;
-			todo -= blocksize;
-			buf += blocksize;
-			saa->audtail &= 0xffff;
-		} else if (saa->writemode == VID_WRITE_MPEG_VID) {
-			spin_lock_irqsave(&saa->lock, flags);
-			if (saa->vidhead <= saa->vidtail)
-				blocksize = 524288 -
-					(saa->vidtail - saa->vidhead);
-			else
-				blocksize = saa->vidhead - saa->vidtail;
-			spin_unlock_irqrestore(&saa->lock, flags);
-			if (blocksize < 65536) {
-				saawrite(SAA7146_PSR_DEBI_S |
-					SAA7146_PSR_PIN1, SAA7146_IER);
-				saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
-				/* wait for buffer space to open */
-				interruptible_sleep_on(&saa->vidq);
-			}
-			spin_lock_irqsave(&saa->lock, flags);
-			if (saa->vidhead <= saa->vidtail) {
-				blocksize = 524288 -
-					(saa->vidtail - saa->vidhead);
-				split = 524288 - saa->vidtail;
-			} else {
-				blocksize = saa->vidhead - saa->vidtail;
-				split = 524288;
-			}
-			spin_unlock_irqrestore(&saa->lock, flags);
-			blocksize--;
-			if (blocksize > todo)
-				blocksize = todo;
-			/* double check that we really have space */
-			if (!blocksize)
-				return -ENOSPC;
-			if (split < blocksize) {
-				if (copy_from_user(saa->vidbuf +
-						saa->vidtail, buf, split))
-					return -EFAULT;
-				buf += split;
-				todo -= split;
-				blocksize -= split;
-				saa->vidtail = 0;
-			}
-			if (copy_from_user(saa->vidbuf + saa->vidtail, buf,
-					blocksize))
-				return -EFAULT;
-			saa->vidtail += blocksize;
-			todo -= blocksize;
-			buf += blocksize;
-			saa->vidtail &= 0x7ffff;
-		} else if (saa->writemode == VID_WRITE_OSD) {
-			if (count > 131072)
-				return -ENOSPC;
-			if (copy_from_user(saa->osdbuf, buf, count))
-				return -EFAULT;
-			buf += count;
-			saa->osdhead = 0;
-			saa->osdtail = count;
-			debiwrite(saa, debNormal, IBM_MP2_OSD_ADDR, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_OSD_LINK_ADDR, 0, 2);
-			debiwrite(saa, debNormal, IBM_MP2_MASK0, 0xc00d, 2);
-			debiwrite(saa, debNormal, IBM_MP2_DISP_MODE,
-				debiread(saa, debNormal,
-					IBM_MP2_DISP_MODE, 2) | 1, 2);
-			/* trigger osd data transfer */
-			saawrite(SAA7146_PSR_DEBI_S |
-				 SAA7146_PSR_PIN1, SAA7146_IER);
-			saawrite(SAA7146_PSR_PIN1, SAA7146_PSR);
-		}
-	}
-	return count;
-}
-
-static int saa_open(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-	struct saa7146 *saa = container_of(vdev, struct saa7146, video_dev);
-
-	lock_kernel();
-	file->private_data = saa;
-
-	saa->user++;
-	if (saa->user > 1) {
-		unlock_kernel();
-		return 0;	/* device open already, don't reset */
-	}
-	saa->writemode = VID_WRITE_MPEG_VID;	/* default to video */
-	unlock_kernel();
-	return 0;
-}
-
-static int saa_release(struct file *file)
-{
-	struct saa7146 *saa = file->private_data;
-	saa->user--;
-
-	if (saa->user > 0)	/* still someone using device */
-		return 0;
-	saawrite(0x007f0000, SAA7146_MC1);	/* stop all overlay dma */
-	return 0;
-}
-
-static const struct v4l2_file_operations saa_fops = {
-	.owner = THIS_MODULE,
-	.open = saa_open,
-	.release = saa_release,
-	.ioctl = saa_ioctl,
-	.read = saa_read,
-	.write = saa_write,
-	.mmap = saa_mmap,
-};
-
-/* template for video_device-structure */
-static struct video_device saa_template = {
-	.name = "SAA7146A",
-	.fops = &saa_fops,
-	.release = video_device_release_empty,
-};
-
-static int __devinit configure_saa7146(struct pci_dev *pdev, int num)
-{
-	int retval;
-	struct saa7146 *saa = pci_get_drvdata(pdev);
-
-	saa->endmarkhead = saa->endmarktail = 0;
-	saa->win.x = saa->win.y = 0;
-	saa->win.width = saa->win.cropwidth = 720;
-	saa->win.height = saa->win.cropheight = 480;
-	saa->win.cropx = saa->win.cropy = 0;
-	saa->win.bpp = 2;
-	saa->win.depth = 16;
-	saa->win.color_fmt = palette2fmt[VIDEO_PALETTE_RGB565];
-	saa->win.bpl = 1024 * saa->win.bpp;
-	saa->win.swidth = 1024;
-	saa->win.sheight = 768;
-	saa->picture.brightness = 32768;
-	saa->picture.contrast = 38768;
-	saa->picture.colour = 32768;
-	saa->cap = 0;
-	saa->nr = num;
-	saa->playmode = VID_PLAY_NORMAL;
-	memset(saa->boardcfg, 0, 64);	/* clear board config area */
-	saa->saa7146_mem = NULL;
-	saa->dmavid1 = saa->dmavid2 = saa->dmavid3 = saa->dmaa1in =
-	    saa->dmaa1out = saa->dmaa2in = saa->dmaa2out =
-	    saa->pagevid1 = saa->pagevid2 = saa->pagevid3 = saa->pagea1in =
-	    saa->pagea1out = saa->pagea2in = saa->pagea2out =
-	    saa->pagedebi = saa->dmaRPS1 = saa->dmaRPS2 = saa->pageRPS1 =
-	    saa->pageRPS2 = NULL;
-	saa->audbuf = saa->vidbuf = saa->osdbuf = saa->dmadebi = NULL;
-	saa->audhead = saa->vidtail = 0;
-
-	init_waitqueue_head(&saa->i2cq);
-	init_waitqueue_head(&saa->audq);
-	init_waitqueue_head(&saa->debiq);
-	init_waitqueue_head(&saa->vidq);
-	spin_lock_init(&saa->lock);
-
-	retval = pci_enable_device(pdev);
-	if (retval) {
-		dev_err(&pdev->dev, "%d: pci_enable_device failed!\n", num);
-		goto err;
-	}
-
-	saa->id = pdev->device;
-	saa->irq = pdev->irq;
-	saa->saa7146_adr = pci_resource_start(pdev, 0);
-	pci_read_config_byte(pdev, PCI_CLASS_REVISION, &saa->revision);
-
-	saa->saa7146_mem = ioremap(saa->saa7146_adr, 0x200);
-	if (saa->saa7146_mem == NULL) {
-		dev_err(&pdev->dev, "%d: ioremap failed!\n", num);
-		retval = -EIO;
-		goto err;
-	}
-
-	memcpy(&saa->video_dev, &saa_template, sizeof(saa_template));
-	saawrite(0, SAA7146_IER);	/* turn off all interrupts */
-
-	retval = request_irq(saa->irq, saa7146_irq, IRQF_SHARED | IRQF_DISABLED,
-		"stradis", saa);
-	if (retval == -EINVAL)
-		dev_err(&pdev->dev, "%d: Bad irq number or handler\n", num);
-	else if (retval == -EBUSY)
-		dev_err(&pdev->dev, "%d: IRQ %ld busy, change your PnP config "
-			"in BIOS\n", num, saa->irq);
-	if (retval < 0)
-		goto errio;
-
-	pci_set_master(pdev);
-	retval = video_register_device(&saa->video_dev, VFL_TYPE_GRABBER,
-		video_nr);
-	if (retval < 0) {
-		dev_err(&pdev->dev, "%d: error in registering video device!\n",
-			num);
-		goto errio;
-	}
-
-	return 0;
-errio:
-	iounmap(saa->saa7146_mem);
-err:
-	return retval;
-}
-
-static int __devinit init_saa7146(struct pci_dev *pdev)
-{
-	struct saa7146 *saa = pci_get_drvdata(pdev);
-
-	saa->user = 0;
-	/* reset the saa7146 */
-	saawrite(0xffff0000, SAA7146_MC1);
-	mdelay(5);
-	/* enable debi and i2c transfers and pins */
-	saawrite(((SAA7146_MC1_EDP | SAA7146_MC1_EI2C |
-		   SAA7146_MC1_TR_E_DEBI) << 16) | 0xffff, SAA7146_MC1);
-	/* ensure proper state of chip */
-	saawrite(0x00000000, SAA7146_PAGE1);
-	saawrite(0x00f302c0, SAA7146_NUM_LINE_BYTE1);
-	saawrite(0x00000000, SAA7146_PAGE2);
-	saawrite(0x01400080, SAA7146_NUM_LINE_BYTE2);
-	saawrite(0x00000000, SAA7146_DD1_INIT);
-	saawrite(0x00000000, SAA7146_DD1_STREAM_B);
-	saawrite(0x00000000, SAA7146_DD1_STREAM_A);
-	saawrite(0x00000000, SAA7146_BRS_CTRL);
-	saawrite(0x80400040, SAA7146_BCS_CTRL);
-	saawrite(0x0000e000 /*| (1<<29) */ , SAA7146_HPS_CTRL);
-	saawrite(0x00000060, SAA7146_CLIP_FORMAT_CTRL);
-	saawrite(0x00000000, SAA7146_ACON1);
-	saawrite(0x00000000, SAA7146_ACON2);
-	saawrite(0x00000600, SAA7146_I2C_STATUS);
-	saawrite(((SAA7146_MC2_UPLD_D1_B | SAA7146_MC2_UPLD_D1_A |
-		SAA7146_MC2_UPLD_BRS | SAA7146_MC2_UPLD_HPS_H |
-		SAA7146_MC2_UPLD_HPS_V | SAA7146_MC2_UPLD_DMA2 |
-		SAA7146_MC2_UPLD_DMA1 | SAA7146_MC2_UPLD_I2C) << 16) | 0xffff,
-		SAA7146_MC2);
-	/* setup arbitration control registers */
-	saawrite(0x1412121a, SAA7146_PCI_BT_V1);
-
-	/* allocate 32k dma buffer + 4k for page table */
-	if ((saa->dmadebi = kmalloc(32768 + 4096, GFP_KERNEL)) == NULL) {
-		dev_err(&pdev->dev, "%d: debi kmalloc failed\n", saa->nr);
-		goto err;
-	}
-#if 0
-	saa->pagedebi = saa->dmadebi + 32768;	/* top 4k is for mmu */
-	saawrite(virt_to_bus(saa->pagedebi) /*|0x800 */ , SAA7146_DEBI_PAGE);
-	for (i = 0; i < 12; i++)	/* setup mmu page table */
-		saa->pagedebi[i] = virt_to_bus((saa->dmadebi + i * 4096));
-#endif
-	saa->audhead = saa->vidhead = saa->osdhead = 0;
-	saa->audtail = saa->vidtail = saa->osdtail = 0;
-	if (saa->vidbuf == NULL && (saa->vidbuf = vmalloc(524288)) == NULL) {
-		dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
-		goto err;
-	}
-	if (saa->audbuf == NULL && (saa->audbuf = vmalloc(65536)) == NULL) {
-		dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
-		goto errfree;
-	}
-	if (saa->osdbuf == NULL && (saa->osdbuf = vmalloc(131072)) == NULL) {
-		dev_err(&pdev->dev, "%d: malloc failed\n", saa->nr);
-		goto errfree;
-	}
-	/* allocate 81920 byte buffer for clipping */
-	if ((saa->dmavid2 = kzalloc(VIDEO_CLIPMAP_SIZE, GFP_KERNEL)) == NULL) {
-		dev_err(&pdev->dev, "%d: clip kmalloc failed\n", saa->nr);
-		goto errfree;
-	}
-	/* setup clipping registers */
-	saawrite(virt_to_bus(saa->dmavid2), SAA7146_BASE_EVEN2);
-	saawrite(virt_to_bus(saa->dmavid2) + 128, SAA7146_BASE_ODD2);
-	saawrite(virt_to_bus(saa->dmavid2) + VIDEO_CLIPMAP_SIZE,
-		 SAA7146_PROT_ADDR2);
-	saawrite(256, SAA7146_PITCH2);
-	saawrite(4, SAA7146_PAGE2);	/* dma direction: read, no byteswap */
-	saawrite(((SAA7146_MC2_UPLD_DMA2) << 16) | SAA7146_MC2_UPLD_DMA2,
-		 SAA7146_MC2);
-	I2CBusScan(saa);
-
-	return 0;
-errfree:
-	vfree(saa->osdbuf);
-	vfree(saa->audbuf);
-	vfree(saa->vidbuf);
-	saa->audbuf = saa->osdbuf = saa->vidbuf = NULL;
-err:
-	return -ENOMEM;
-}
-
-static void stradis_release_saa(struct pci_dev *pdev)
-{
-	u8 command;
-	struct saa7146 *saa = pci_get_drvdata(pdev);
-
-	/* turn off all capturing, DMA and IRQs */
-	saawrite(0xffff0000, SAA7146_MC1);	/* reset chip */
-	saawrite(0, SAA7146_MC2);
-	saawrite(0, SAA7146_IER);
-	saawrite(0xffffffffUL, SAA7146_ISR);
-
-	/* disable PCI bus-mastering */
-	pci_read_config_byte(pdev, PCI_COMMAND, &command);
-	command &= ~PCI_COMMAND_MASTER;
-	pci_write_config_byte(pdev, PCI_COMMAND, command);
-
-	/* unmap and free memory */
-	saa->audhead = saa->audtail = saa->osdhead = 0;
-	saa->vidhead = saa->vidtail = saa->osdtail = 0;
-	vfree(saa->vidbuf);
-	vfree(saa->audbuf);
-	vfree(saa->osdbuf);
-	kfree(saa->dmavid2);
-	saa->audbuf = saa->vidbuf = saa->osdbuf = NULL;
-	saa->dmavid2 = NULL;
-	kfree(saa->dmadebi);
-	kfree(saa->dmavid1);
-	kfree(saa->dmavid3);
-	kfree(saa->dmaa1in);
-	kfree(saa->dmaa1out);
-	kfree(saa->dmaa2in);
-	kfree(saa->dmaa2out);
-	kfree(saa->dmaRPS1);
-	kfree(saa->dmaRPS2);
-	free_irq(saa->irq, saa);
-	if (saa->saa7146_mem)
-		iounmap(saa->saa7146_mem);
-	if (video_is_registered(&saa->video_dev))
-		video_unregister_device(&saa->video_dev);
-}
-
-static int __devinit stradis_probe(struct pci_dev *pdev,
-	const struct pci_device_id *ent)
-{
-	int retval = -EINVAL;
-
-	if (saa_num >= SAA7146_MAX)
-		goto err;
-
-	if (!pdev->subsystem_vendor)
-		dev_info(&pdev->dev, "%d: rev1 decoder\n", saa_num);
-	else
-		dev_info(&pdev->dev, "%d: SDM2xx found\n", saa_num);
-
-	pci_set_drvdata(pdev, &saa7146s[saa_num]);
-
-	retval = configure_saa7146(pdev, saa_num);
-	if (retval) {
-		dev_err(&pdev->dev, "%d: error in configuring\n", saa_num);
-		goto err;
-	}
-
-	if (init_saa7146(pdev) < 0) {
-		dev_err(&pdev->dev, "%d: error in initialization\n", saa_num);
-		retval = -EIO;
-		goto errrel;
-	}
-
-	saa_num++;
-
-	return 0;
-errrel:
-	stradis_release_saa(pdev);
-err:
-	return retval;
-}
-
-static void __devexit stradis_remove(struct pci_dev *pdev)
-{
-	stradis_release_saa(pdev);
-}
-
-static struct pci_device_id stradis_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA7146) },
-	{ 0 }
-};
-
-
-static struct pci_driver stradis_driver = {
-	.name = "stradis",
-	.id_table = stradis_pci_tbl,
-	.probe = stradis_probe,
-	.remove = __devexit_p(stradis_remove)
-};
-
-static int __init stradis_init(void)
-{
-	int retval;
-
-	saa_num = 0;
-
-	retval = pci_register_driver(&stradis_driver);
-	if (retval)
-		printk(KERN_ERR "stradis: Unable to register pci driver.\n");
-
-	return retval;
-}
-
-static void __exit stradis_exit(void)
-{
-	pci_unregister_driver(&stradis_driver);
-	printk(KERN_INFO "stradis: module cleanup complete\n");
-}
-
-module_init(stradis_init);
-module_exit(stradis_exit);
diff --git a/drivers/staging/tidspbridge/Kconfig b/drivers/staging/tidspbridge/Kconfig
index ff64d464143..93de4f2e8bf 100644
--- a/drivers/staging/tidspbridge/Kconfig
+++ b/drivers/staging/tidspbridge/Kconfig
@@ -6,7 +6,6 @@ menuconfig TIDSPBRIDGE
 	tristate "DSP Bridge driver"
 	depends on ARCH_OMAP3
 	select OMAP_MBOX_FWK
-	select OMAP_IOMMU
 	help
 	  DSP/BIOS Bridge is designed for platforms that contain a GPP and
 	  one or more attached DSPs.  The GPP is considered the master or
diff --git a/drivers/staging/tidspbridge/Makefile b/drivers/staging/tidspbridge/Makefile
index 50decc2935c..41c644c3318 100644
--- a/drivers/staging/tidspbridge/Makefile
+++ b/drivers/staging/tidspbridge/Makefile
@@ -2,18 +2,19 @@ obj-$(CONFIG_TIDSPBRIDGE)	+= bridgedriver.o
 
 libgen = gen/gb.o gen/gs.o gen/gh.o gen/uuidutil.o
 libcore = core/chnl_sm.o core/msg_sm.o core/io_sm.o core/tiomap3430.o \
-		core/tiomap3430_pwr.o core/tiomap_io.o core/dsp-mmu.o \
+		core/tiomap3430_pwr.o core/tiomap_io.o \
 		core/ue_deh.o core/wdt.o core/dsp-clock.o core/sync.o
 libpmgr = pmgr/chnl.o pmgr/io.o pmgr/msg.o pmgr/cod.o pmgr/dev.o pmgr/dspapi.o \
-		pmgr/cmm.o pmgr/dbll.o
+		pmgr/dmm.o pmgr/cmm.o pmgr/dbll.o
 librmgr = rmgr/dbdcd.o rmgr/disp.o rmgr/drv.o rmgr/mgr.o rmgr/node.o \
 		rmgr/proc.o rmgr/pwr.o rmgr/rmm.o rmgr/strm.o rmgr/dspdrv.o \
 		rmgr/nldr.o rmgr/drv_interface.o
 libdload = dynload/cload.o dynload/getsection.o dynload/reloc.o \
 		 dynload/tramp.o
+libhw = hw/hw_mmu.o
 
 bridgedriver-y := $(libgen) $(libservices) $(libcore) $(libpmgr) $(librmgr) \
-			$(libdload)
+			$(libdload) $(libhw)
 
 #Machine dependent
 ccflags-y += -D_TI_ -D_DB_TIOMAP -DTMS32060 \
diff --git a/drivers/staging/tidspbridge/core/_deh.h b/drivers/staging/tidspbridge/core/_deh.h
index 8ae263387a8..16723cd3483 100644
--- a/drivers/staging/tidspbridge/core/_deh.h
+++ b/drivers/staging/tidspbridge/core/_deh.h
@@ -27,8 +27,9 @@
 struct deh_mgr {
 	struct bridge_dev_context *hbridge_context;	/* Bridge context. */
 	struct ntfy_object *ntfy_obj;	/* NTFY object */
-};
 
-int mmu_fault_isr(struct iommu *mmu);
+	/* MMU Fault DPC */
+	struct tasklet_struct dpc_tasklet;
+};
 
 #endif /* _DEH_ */
diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h
index e0a801c1cb9..1159a500f49 100644
--- a/drivers/staging/tidspbridge/core/_tiomap.h
+++ b/drivers/staging/tidspbridge/core/_tiomap.h
@@ -19,12 +19,23 @@
 #ifndef _TIOMAP_
 #define _TIOMAP_
 
-#include <plat/powerdomain.h>
-#include <plat/clockdomain.h>
+/*
+ * XXX These powerdomain.h/clockdomain.h includes are wrong and should
+ * be removed.  No driver should call pwrdm_* or clkdm_* functions
+ * directly; they should rely on OMAP core code to do this.
+ */
+#include <mach-omap2/powerdomain.h>
+#include <mach-omap2/clockdomain.h>
+/*
+ * XXX These mach-omap2/ includes are wrong and should be removed.  No
+ * driver should read or write to PRM/CM registers directly; they
+ * should rely on OMAP core code to do this.
+ */
+#include <mach-omap2/cm2xxx_3xxx.h>
 #include <mach-omap2/prm-regbits-34xx.h>
 #include <mach-omap2/cm-regbits-34xx.h>
-#include <dspbridge/dsp-mmu.h>
 #include <dspbridge/devdefs.h>
+#include <hw_defs.h>
 #include <dspbridge/dspioctl.h>	/* for bridge_ioctl_extproc defn */
 #include <dspbridge/sync.h>
 #include <dspbridge/clk.h>
@@ -306,18 +317,6 @@ static const struct bpwr_clk_t bpwr_clks[] = {
 
 #define CLEAR_BIT_INDEX(reg, index)   (reg &= ~(1 << (index)))
 
-struct shm_segs {
-	u32 seg0_da;
-	u32 seg0_pa;
-	u32 seg0_va;
-	u32 seg0_size;
-	u32 seg1_da;
-	u32 seg1_pa;
-	u32 seg1_va;
-	u32 seg1_size;
-};
-
-
 /* This Bridge driver's device context: */
 struct bridge_dev_context {
 	struct dev_object *hdev_obj;	/* Handle to Bridge device object. */
@@ -328,6 +327,7 @@ struct bridge_dev_context {
 	 */
 	u32 dw_dsp_ext_base_addr;	/* See the comment above */
 	u32 dw_api_reg_base;	/* API mem map'd registers */
+	void __iomem *dw_dsp_mmu_base;	/* DSP MMU Mapped registers */
 	u32 dw_api_clk_base;	/* CLK Registers */
 	u32 dw_dsp_clk_m2_base;	/* DSP Clock Module m2 */
 	u32 dw_public_rhea;	/* Pub Rhea */
@@ -339,8 +339,7 @@ struct bridge_dev_context {
 	u32 dw_internal_size;	/* Internal memory size */
 
 	struct omap_mbox *mbox;		/* Mail box handle */
-	struct iommu *dsp_mmu;      /* iommu for iva2 handler */
-	struct shm_segs sh_s;
+
 	struct cfg_hostres *resources;	/* Host Resources */
 
 	/*
@@ -353,6 +352,7 @@ struct bridge_dev_context {
 
 	/* TC Settings */
 	bool tc_word_swap_on;	/* Traffic Controller Word Swap */
+	struct pg_table_attrs *pt_attrs;
 	u32 dsp_per_clks;
 };
 
diff --git a/drivers/staging/tidspbridge/core/dsp-mmu.c b/drivers/staging/tidspbridge/core/dsp-mmu.c
deleted file mode 100644
index 983c95adc8f..00000000000
--- a/drivers/staging/tidspbridge/core/dsp-mmu.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * dsp-mmu.c
- *
- * DSP-BIOS Bridge driver support functions for TI OMAP processors.
- *
- * DSP iommu.
- *
- * Copyright (C) 2010 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <dspbridge/host_os.h>
-#include <plat/dmtimer.h>
-#include <dspbridge/dbdefs.h>
-#include <dspbridge/dev.h>
-#include <dspbridge/io_sm.h>
-#include <dspbridge/dspdeh.h>
-#include "_tiomap.h"
-
-#include <dspbridge/dsp-mmu.h>
-
-#define MMU_CNTL_TWL_EN		(1 << 2)
-
-static struct tasklet_struct mmu_tasklet;
-
-#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
-static void mmu_fault_print_stack(struct bridge_dev_context *dev_context)
-{
-	void *dummy_addr;
-	u32 fa, tmp;
-	struct iotlb_entry e;
-	struct iommu *mmu = dev_context->dsp_mmu;
-	dummy_addr = (void *)__get_free_page(GFP_ATOMIC);
-
-	/*
-	 * Before acking the MMU fault, let's make sure MMU can only
-	 * access entry #0. Then add a new entry so that the DSP OS
-	 * can continue in order to dump the stack.
-	 */
-	tmp = iommu_read_reg(mmu, MMU_CNTL);
-	tmp &= ~MMU_CNTL_TWL_EN;
-	iommu_write_reg(mmu, tmp, MMU_CNTL);
-	fa = iommu_read_reg(mmu, MMU_FAULT_AD);
-	e.da = fa & PAGE_MASK;
-	e.pa = virt_to_phys(dummy_addr);
-	e.valid = 1;
-	e.prsvd = 1;
-	e.pgsz = IOVMF_PGSZ_4K & MMU_CAM_PGSZ_MASK;
-	e.endian = MMU_RAM_ENDIAN_LITTLE;
-	e.elsz = MMU_RAM_ELSZ_32;
-	e.mixed = 0;
-
-	load_iotlb_entry(mmu, &e);
-
-	dsp_clk_enable(DSP_CLK_GPT8);
-
-	dsp_gpt_wait_overflow(DSP_CLK_GPT8, 0xfffffffe);
-
-	/* Clear MMU interrupt */
-	tmp = iommu_read_reg(mmu, MMU_IRQSTATUS);
-	iommu_write_reg(mmu, tmp, MMU_IRQSTATUS);
-
-	dump_dsp_stack(dev_context);
-	dsp_clk_disable(DSP_CLK_GPT8);
-
-	iopgtable_clear_entry(mmu, fa);
-	free_page((unsigned long)dummy_addr);
-}
-#endif
-
-
-static void fault_tasklet(unsigned long data)
-{
-	struct iommu *mmu = (struct iommu *)data;
-	struct bridge_dev_context *dev_ctx;
-	struct deh_mgr *dm;
-	u32 fa;
-	dev_get_deh_mgr(dev_get_first(), &dm);
-	dev_get_bridge_context(dev_get_first(), &dev_ctx);
-
-	if (!dm || !dev_ctx)
-		return;
-
-	fa = iommu_read_reg(mmu, MMU_FAULT_AD);
-
-#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
-	print_dsp_trace_buffer(dev_ctx);
-	dump_dl_modules(dev_ctx);
-	mmu_fault_print_stack(dev_ctx);
-#endif
-
-	bridge_deh_notify(dm, DSP_MMUFAULT, fa);
-}
-
-/*
- *  ======== mmu_fault_isr ========
- *      ISR to be triggered by a DSP MMU fault interrupt.
- */
-static int mmu_fault_callback(struct iommu *mmu)
-{
-	if (!mmu)
-		return -EPERM;
-
-	iommu_write_reg(mmu, 0, MMU_IRQENABLE);
-	tasklet_schedule(&mmu_tasklet);
-	return 0;
-}
-
-/**
- * dsp_mmu_init() - initialize dsp_mmu module and returns a handle
- *
- * This function initialize dsp mmu module and returns a struct iommu
- * handle to use it for dsp maps.
- *
- */
-struct iommu *dsp_mmu_init()
-{
-	struct iommu *mmu;
-
-	mmu = iommu_get("iva2");
-
-	if (!IS_ERR(mmu)) {
-		tasklet_init(&mmu_tasklet, fault_tasklet, (unsigned long)mmu);
-		mmu->isr = mmu_fault_callback;
-	}
-
-	return mmu;
-}
-
-/**
- * dsp_mmu_exit() - destroy dsp mmu module
- * @mmu:	Pointer to iommu handle.
- *
- * This function destroys dsp mmu module.
- *
- */
-void dsp_mmu_exit(struct iommu *mmu)
-{
-	if (mmu)
-		iommu_put(mmu);
-	tasklet_kill(&mmu_tasklet);
-}
-
-/**
- * user_va2_pa() - get physical address from userspace address.
- * @mm:		mm_struct Pointer of the process.
- * @address:	Virtual user space address.
- *
- */
-static u32 user_va2_pa(struct mm_struct *mm, u32 address)
-{
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *ptep, pte;
-
-	pgd = pgd_offset(mm, address);
-	if (!(pgd_none(*pgd) || pgd_bad(*pgd))) {
-		pmd = pmd_offset(pgd, address);
-		if (!(pmd_none(*pmd) || pmd_bad(*pmd))) {
-			ptep = pte_offset_map(pmd, address);
-			if (ptep) {
-				pte = *ptep;
-				if (pte_present(pte))
-					return pte & PAGE_MASK;
-			}
-		}
-	}
-
-	return 0;
-}
-
-/**
- * get_io_pages() - pin and get pages of io user's buffer.
- * @mm:		mm_struct Pointer of the process.
- * @uva:		Virtual user space address.
- * @pages	Pages to be pined.
- * @usr_pgs	struct page array pointer where the user pages will be stored
- *
- */
-static int get_io_pages(struct mm_struct *mm, u32 uva, unsigned pages,
-						struct page **usr_pgs)
-{
-	u32 pa;
-	int i;
-	struct page *pg;
-
-	for (i = 0; i < pages; i++) {
-		pa = user_va2_pa(mm, uva);
-
-		if (!pfn_valid(__phys_to_pfn(pa)))
-			break;
-
-		pg = phys_to_page(pa);
-		usr_pgs[i] = pg;
-		get_page(pg);
-	}
-	return i;
-}
-
-/**
- * user_to_dsp_map() - maps user to dsp virtual address
- * @mmu:	Pointer to iommu handle.
- * @uva:		Virtual user space address.
- * @da		DSP address
- * @size		Buffer size to map.
- * @usr_pgs	struct page array pointer where the user pages will be stored
- *
- * This function maps a user space buffer into DSP virtual address.
- *
- */
-u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
-				struct page **usr_pgs)
-{
-	int res, w;
-	unsigned pages;
-	int i;
-	struct vm_area_struct *vma;
-	struct mm_struct *mm = current->mm;
-	struct sg_table *sgt;
-	struct scatterlist *sg;
-
-	if (!size || !usr_pgs)
-		return -EINVAL;
-
-	pages = size / PG_SIZE4K;
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, uva);
-	while (vma && (uva + size > vma->vm_end))
-		vma = find_vma(mm, vma->vm_end + 1);
-
-	if (!vma) {
-		pr_err("%s: Failed to get VMA region for 0x%x (%d)\n",
-						__func__, uva, size);
-		up_read(&mm->mmap_sem);
-		return -EINVAL;
-	}
-	if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
-		w = 1;
-
-	if (vma->vm_flags & VM_IO)
-		i = get_io_pages(mm, uva, pages, usr_pgs);
-	else
-		i = get_user_pages(current, mm, uva, pages, w, 1,
-							usr_pgs, NULL);
-	up_read(&mm->mmap_sem);
-
-	if (i < 0)
-		return i;
-
-	if (i < pages) {
-		res = -EFAULT;
-		goto err_pages;
-	}
-
-	sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
-	if (!sgt) {
-		res = -ENOMEM;
-		goto err_pages;
-	}
-
-	res = sg_alloc_table(sgt, pages, GFP_KERNEL);
-
-	if (res < 0)
-		goto err_sg;
-
-	for_each_sg(sgt->sgl, sg, sgt->nents, i)
-		sg_set_page(sg, usr_pgs[i], PAGE_SIZE, 0);
-
-	da = iommu_vmap(mmu, da, sgt, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-
-	if (!IS_ERR_VALUE(da))
-		return da;
-	res = (int)da;
-
-	sg_free_table(sgt);
-err_sg:
-	kfree(sgt);
-	i = pages;
-err_pages:
-	while (i--)
-		put_page(usr_pgs[i]);
-	return res;
-}
-
-/**
- * user_to_dsp_unmap() - unmaps DSP virtual buffer.
- * @mmu:	Pointer to iommu handle.
- * @da		DSP address
- *
- * This function unmaps a user space buffer into DSP virtual address.
- *
- */
-int user_to_dsp_unmap(struct iommu *mmu, u32 da)
-{
-	unsigned i;
-	struct sg_table *sgt;
-	struct scatterlist *sg;
-
-	sgt = iommu_vunmap(mmu, da);
-	if (!sgt)
-		return -EFAULT;
-
-	for_each_sg(sgt->sgl, sg, sgt->nents, i)
-		put_page(sg_page(sg));
-	sg_free_table(sgt);
-	kfree(sgt);
-
-	return 0;
-}
diff --git a/drivers/staging/tidspbridge/core/io_sm.c b/drivers/staging/tidspbridge/core/io_sm.c
index 194badaba0e..571864555dd 100644
--- a/drivers/staging/tidspbridge/core/io_sm.c
+++ b/drivers/staging/tidspbridge/core/io_sm.c
@@ -39,6 +39,10 @@
 #include <dspbridge/ntfy.h>
 #include <dspbridge/sync.h>
 
+/* Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
 /* Bridge Driver */
 #include <dspbridge/dspdeh.h>
 #include <dspbridge/dspio.h>
@@ -287,7 +291,6 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 	struct cod_manager *cod_man;
 	struct chnl_mgr *hchnl_mgr;
 	struct msg_mgr *hmsg_mgr;
-	struct shm_segs *sm_sg;
 	u32 ul_shm_base;
 	u32 ul_shm_base_offset;
 	u32 ul_shm_limit;
@@ -310,9 +313,18 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 	struct bridge_ioctl_extproc ae_proc[BRDIOCTL_NUMOFMMUTLB];
 	struct cfg_hostres *host_res;
 	struct bridge_dev_context *pbridge_context;
+	u32 map_attrs;
 	u32 shm0_end;
 	u32 ul_dyn_ext_base;
 	u32 ul_seg1_size = 0;
+	u32 pa_curr = 0;
+	u32 va_curr = 0;
+	u32 gpp_va_curr = 0;
+	u32 num_bytes = 0;
+	u32 all_bits = 0;
+	u32 page_size[] = { HW_PAGE_SIZE16MB, HW_PAGE_SIZE1MB,
+		HW_PAGE_SIZE64KB, HW_PAGE_SIZE4KB
+	};
 
 	status = dev_get_bridge_context(hio_mgr->hdev_obj, &pbridge_context);
 	if (!pbridge_context) {
@@ -325,8 +337,6 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 		status = -EFAULT;
 		goto func_end;
 	}
-	sm_sg = &pbridge_context->sh_s;
-
 	status = dev_get_cod_mgr(hio_mgr->hdev_obj, &cod_man);
 	if (!cod_man) {
 		status = -EFAULT;
@@ -461,14 +471,129 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 	if (status)
 		goto func_end;
 
-	sm_sg->seg1_pa = ul_gpp_pa;
-	sm_sg->seg1_da = ul_dyn_ext_base;
-	sm_sg->seg1_va = ul_gpp_va;
-	sm_sg->seg1_size = ul_seg1_size;
-	sm_sg->seg0_pa = ul_gpp_pa + ul_pad_size + ul_seg1_size;
-	sm_sg->seg0_da = ul_dsp_va;
-	sm_sg->seg0_va = ul_gpp_va + ul_pad_size + ul_seg1_size;
-	sm_sg->seg0_size = ul_seg_size;
+	pa_curr = ul_gpp_pa;
+	va_curr = ul_dyn_ext_base * hio_mgr->word_size;
+	gpp_va_curr = ul_gpp_va;
+	num_bytes = ul_seg1_size;
+
+	/*
+	 * Try to fit into TLB entries. If not possible, push them to page
+	 * tables. It is quite possible that if sections are not on
+	 * bigger page boundary, we may end up making several small pages.
+	 * So, push them onto page tables, if that is the case.
+	 */
+	map_attrs = 0x00000000;
+	map_attrs = DSP_MAPLITTLEENDIAN;
+	map_attrs |= DSP_MAPPHYSICALADDR;
+	map_attrs |= DSP_MAPELEMSIZE32;
+	map_attrs |= DSP_MAPDONOTLOCK;
+
+	while (num_bytes) {
+		/*
+		 * To find the max. page size with which both PA & VA are
+		 * aligned.
+		 */
+		all_bits = pa_curr | va_curr;
+		dev_dbg(bridge, "all_bits %x, pa_curr %x, va_curr %x, "
+			"num_bytes %x\n", all_bits, pa_curr, va_curr,
+			num_bytes);
+		for (i = 0; i < 4; i++) {
+			if ((num_bytes >= page_size[i]) && ((all_bits &
+							     (page_size[i] -
+							      1)) == 0)) {
+				status =
+				    hio_mgr->intf_fxns->
+				    pfn_brd_mem_map(hio_mgr->hbridge_context,
+						    pa_curr, va_curr,
+						    page_size[i], map_attrs,
+						    NULL);
+				if (status)
+					goto func_end;
+				pa_curr += page_size[i];
+				va_curr += page_size[i];
+				gpp_va_curr += page_size[i];
+				num_bytes -= page_size[i];
+				/*
+				 * Don't try smaller sizes. Hopefully we have
+				 * reached an address aligned to a bigger page
+				 * size.
+				 */
+				break;
+			}
+		}
+	}
+	pa_curr += ul_pad_size;
+	va_curr += ul_pad_size;
+	gpp_va_curr += ul_pad_size;
+
+	/* Configure the TLB entries for the next cacheable segment */
+	num_bytes = ul_seg_size;
+	va_curr = ul_dsp_va * hio_mgr->word_size;
+	while (num_bytes) {
+		/*
+		 * To find the max. page size with which both PA & VA are
+		 * aligned.
+		 */
+		all_bits = pa_curr | va_curr;
+		dev_dbg(bridge, "all_bits for Seg1 %x, pa_curr %x, "
+			"va_curr %x, num_bytes %x\n", all_bits, pa_curr,
+			va_curr, num_bytes);
+		for (i = 0; i < 4; i++) {
+			if (!(num_bytes >= page_size[i]) ||
+			    !((all_bits & (page_size[i] - 1)) == 0))
+				continue;
+			if (ndx < MAX_LOCK_TLB_ENTRIES) {
+				/*
+				 * This is the physical address written to
+				 * DSP MMU.
+				 */
+				ae_proc[ndx].ul_gpp_pa = pa_curr;
+				/*
+				 * This is the virtual uncached ioremapped
+				 * address!!!
+				 */
+				ae_proc[ndx].ul_gpp_va = gpp_va_curr;
+				ae_proc[ndx].ul_dsp_va =
+				    va_curr / hio_mgr->word_size;
+				ae_proc[ndx].ul_size = page_size[i];
+				ae_proc[ndx].endianism = HW_LITTLE_ENDIAN;
+				ae_proc[ndx].elem_size = HW_ELEM_SIZE16BIT;
+				ae_proc[ndx].mixed_mode = HW_MMU_CPUES;
+				dev_dbg(bridge, "shm MMU TLB entry PA %x"
+					" VA %x DSP_VA %x Size %x\n",
+					ae_proc[ndx].ul_gpp_pa,
+					ae_proc[ndx].ul_gpp_va,
+					ae_proc[ndx].ul_dsp_va *
+					hio_mgr->word_size, page_size[i]);
+				ndx++;
+			} else {
+				status =
+				    hio_mgr->intf_fxns->
+				    pfn_brd_mem_map(hio_mgr->hbridge_context,
+						    pa_curr, va_curr,
+						    page_size[i], map_attrs,
+						    NULL);
+				dev_dbg(bridge,
+					"shm MMU PTE entry PA %x"
+					" VA %x DSP_VA %x Size %x\n",
+					ae_proc[ndx].ul_gpp_pa,
+					ae_proc[ndx].ul_gpp_va,
+					ae_proc[ndx].ul_dsp_va *
+					hio_mgr->word_size, page_size[i]);
+				if (status)
+					goto func_end;
+			}
+			pa_curr += page_size[i];
+			va_curr += page_size[i];
+			gpp_va_curr += page_size[i];
+			num_bytes -= page_size[i];
+			/*
+			 * Don't try smaller sizes. Hopefully we have reached
+			 * an address aligned to a bigger page size.
+			 */
+			break;
+		}
+	}
 
 	/*
 	 * Copy remaining entries from CDB. All entries are 1 MB and
@@ -509,12 +634,38 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 					"DSP_VA 0x%x\n", ae_proc[ndx].ul_gpp_pa,
 					ae_proc[ndx].ul_dsp_va);
 				ndx++;
+			} else {
+				status = hio_mgr->intf_fxns->pfn_brd_mem_map
+				    (hio_mgr->hbridge_context,
+				     hio_mgr->ext_proc_info.ty_tlb[i].
+				     ul_gpp_phys,
+				     hio_mgr->ext_proc_info.ty_tlb[i].
+				     ul_dsp_virt, 0x100000, map_attrs,
+				     NULL);
 			}
 		}
 		if (status)
 			goto func_end;
 	}
 
+	map_attrs = 0x00000000;
+	map_attrs = DSP_MAPLITTLEENDIAN;
+	map_attrs |= DSP_MAPPHYSICALADDR;
+	map_attrs |= DSP_MAPELEMSIZE32;
+	map_attrs |= DSP_MAPDONOTLOCK;
+
+	/* Map the L4 peripherals */
+	i = 0;
+	while (l4_peripheral_table[i].phys_addr) {
+		status = hio_mgr->intf_fxns->pfn_brd_mem_map
+		    (hio_mgr->hbridge_context, l4_peripheral_table[i].phys_addr,
+		     l4_peripheral_table[i].dsp_virt_addr, HW_PAGE_SIZE4KB,
+		     map_attrs, NULL);
+		if (status)
+			goto func_end;
+		i++;
+	}
+
 	for (i = ndx; i < BRDIOCTL_NUMOFMMUTLB; i++) {
 		ae_proc[i].ul_dsp_va = 0;
 		ae_proc[i].ul_gpp_pa = 0;
@@ -537,12 +688,12 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 		status = -EFAULT;
 		goto func_end;
 	} else {
-		if (sm_sg->seg0_da > ul_shm_base) {
+		if (ae_proc[0].ul_dsp_va > ul_shm_base) {
 			status = -EPERM;
 			goto func_end;
 		}
 		/* ul_shm_base may not be at ul_dsp_va address */
-		ul_shm_base_offset = (ul_shm_base - sm_sg->seg0_da) *
+		ul_shm_base_offset = (ul_shm_base - ae_proc[0].ul_dsp_va) *
 		    hio_mgr->word_size;
 		/*
 		 * bridge_dev_ctrl() will set dev context dsp-mmu info. In
@@ -566,7 +717,8 @@ int bridge_io_on_loaded(struct io_mgr *hio_mgr)
 			goto func_end;
 		}
 		/* Register SM */
-		status = register_shm_segs(hio_mgr, cod_man, sm_sg->seg0_pa);
+		status =
+		    register_shm_segs(hio_mgr, cod_man, ae_proc[0].ul_gpp_pa);
 	}
 
 	hio_mgr->shared_mem = (struct shm *)ul_shm_base;
diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c
index f22bc12bc0d..1be081f917a 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430.c
@@ -23,7 +23,6 @@
 #include <dspbridge/host_os.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
-#include <plat/control.h>
 
 /*  ----------------------------------- DSP/BIOS Bridge */
 #include <dspbridge/dbdefs.h>
@@ -35,6 +34,10 @@
 #include <dspbridge/drv.h>
 #include <dspbridge/sync.h>
 
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
 /*  ----------------------------------- Link Driver */
 #include <dspbridge/dspdefs.h>
 #include <dspbridge/dspchnl.h>
@@ -47,6 +50,7 @@
 /*  ----------------------------------- Platform Manager */
 #include <dspbridge/dev.h>
 #include <dspbridge/dspapi.h>
+#include <dspbridge/dmm.h>
 #include <dspbridge/wdt.h>
 
 /*  ----------------------------------- Local */
@@ -67,6 +71,20 @@
 #define MMU_SMALL_PAGE_MASK      0xFFFFF000
 #define OMAP3_IVA2_BOOTADDR_MASK 0xFFFFFC00
 #define PAGES_II_LVL_TABLE   512
+#define PHYS_TO_PAGE(phys)      pfn_to_page((phys) >> PAGE_SHIFT)
+
+/*
+ * This is a totally ugly layer violation, but needed until
+ * omap_ctrl_set_dsp_boot*() are provided.
+ */
+#define OMAP3_IVA2_BOOTMOD_IDLE 1
+#define OMAP2_CONTROL_GENERAL 0x270
+#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+
+#define OMAP343X_CTRL_REGADDR(reg) \
+	OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
 
 /* Forward Declarations: */
 static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt);
@@ -91,6 +109,12 @@ static int bridge_brd_mem_copy(struct bridge_dev_context *dev_ctxt,
 static int bridge_brd_mem_write(struct bridge_dev_context *dev_ctxt,
 				    u8 *host_buff, u32 dsp_addr,
 				    u32 ul_num_bytes, u32 mem_type);
+static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctxt,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes, u32 ul_map_attr,
+				  struct page **mapped_pages);
+static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctxt,
+				     u32 virt_addr, u32 ul_num_bytes);
 static int bridge_dev_create(struct bridge_dev_context
 					**dev_cntxt,
 					struct dev_object *hdev_obj,
@@ -98,8 +122,57 @@ static int bridge_dev_create(struct bridge_dev_context
 static int bridge_dev_ctrl(struct bridge_dev_context *dev_context,
 				  u32 dw_cmd, void *pargs);
 static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt);
+static u32 user_va2_pa(struct mm_struct *mm, u32 address);
+static int pte_update(struct bridge_dev_context *dev_ctxt, u32 pa,
+			     u32 va, u32 size,
+			     struct hw_mmu_map_attrs_t *map_attrs);
+static int pte_set(struct pg_table_attrs *pt, u32 pa, u32 va,
+			  u32 size, struct hw_mmu_map_attrs_t *attrs);
+static int mem_map_vmalloc(struct bridge_dev_context *dev_context,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes,
+				  struct hw_mmu_map_attrs_t *hw_attrs);
+
 bool wait_for_start(struct bridge_dev_context *dev_context, u32 dw_sync_addr);
 
+/*  ----------------------------------- Globals */
+
+/* Attributes of L2 page tables for DSP MMU */
+struct page_info {
+	u32 num_entries;	/* Number of valid PTEs in the L2 PT */
+};
+
+/* Attributes used to manage the DSP MMU page tables */
+struct pg_table_attrs {
+	spinlock_t pg_lock;	/* Critical section object handle */
+
+	u32 l1_base_pa;		/* Physical address of the L1 PT */
+	u32 l1_base_va;		/* Virtual  address of the L1 PT */
+	u32 l1_size;		/* Size of the L1 PT */
+	u32 l1_tbl_alloc_pa;
+	/* Physical address of Allocated mem for L1 table. May not be aligned */
+	u32 l1_tbl_alloc_va;
+	/* Virtual address of Allocated mem for L1 table. May not be aligned */
+	u32 l1_tbl_alloc_sz;
+	/* Size of consistent memory allocated for L1 table.
+	 * May not be aligned */
+
+	u32 l2_base_pa;		/* Physical address of the L2 PT */
+	u32 l2_base_va;		/* Virtual  address of the L2 PT */
+	u32 l2_size;		/* Size of the L2 PT */
+	u32 l2_tbl_alloc_pa;
+	/* Physical address of Allocated mem for L2 table. May not be aligned */
+	u32 l2_tbl_alloc_va;
+	/* Virtual address of Allocated mem for L2 table. May not be aligned */
+	u32 l2_tbl_alloc_sz;
+	/* Size of consistent memory allocated for L2 table.
+	 * May not be aligned */
+
+	u32 l2_num_pages;	/* Number of allocated L2 PT */
+	/* Array [l2_num_pages] of L2 PT info structs */
+	struct page_info *pg_info;
+};
+
 /*
  *  This Bridge driver's function interface table.
  */
@@ -119,6 +192,8 @@ static struct bridge_drv_interface drv_interface_fxns = {
 	bridge_brd_set_state,
 	bridge_brd_mem_copy,
 	bridge_brd_mem_write,
+	bridge_brd_mem_map,
+	bridge_brd_mem_un_map,
 	/* The following CHNL functions are provided by chnl_io.lib: */
 	bridge_chnl_create,
 	bridge_chnl_destroy,
@@ -148,6 +223,27 @@ static struct bridge_drv_interface drv_interface_fxns = {
 	bridge_msg_set_queue_id,
 };
 
+static inline void flush_all(struct bridge_dev_context *dev_context)
+{
+	if (dev_context->dw_brd_state == BRD_DSP_HIBERNATION ||
+	    dev_context->dw_brd_state == BRD_HIBERNATION)
+		wake_dsp(dev_context, NULL);
+
+	hw_mmu_tlb_flush_all(dev_context->dw_dsp_mmu_base);
+}
+
+static void bad_page_dump(u32 pa, struct page *pg)
+{
+	pr_emerg("DSPBRIDGE: MAP function: COUNT 0 FOR PA 0x%x\n", pa);
+	pr_emerg("Bad page state in process '%s'\n"
+		 "page:%p flags:0x%0*lx mapping:%p mapcount:%d count:%d\n"
+		 "Backtrace:\n",
+		 current->comm, pg, (int)(2 * sizeof(unsigned long)),
+		 (unsigned long)pg->flags, pg->mapping,
+		 page_mapcount(pg), page_count(pg));
+	dump_stack();
+}
+
 /*
  *  ======== bridge_drv_entry ========
  *  purpose:
@@ -203,7 +299,8 @@ static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt)
 		(*pdata->dsp_cm_write)(OMAP34XX_CLKSTCTRL_DISABLE_AUTO,
 					OMAP3430_IVA2_MOD, OMAP2_CM_CLKSTCTRL);
 	}
-
+	(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
+					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 	dsp_clk_enable(DSP_CLK_IVA2);
 
 	/* set the device state to IDLE */
@@ -274,17 +371,14 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 {
 	int status = 0;
 	struct bridge_dev_context *dev_context = dev_ctxt;
-	struct iommu *mmu = NULL;
-	struct shm_segs *sm_sg;
-	int l4_i = 0, tlb_i = 0;
-	u32 sg0_da = 0, sg1_da = 0;
-	struct bridge_ioctl_extproc *tlb = dev_context->atlb_entry;
 	u32 dw_sync_addr = 0;
 	u32 ul_shm_base;	/* Gpp Phys SM base addr(byte) */
 	u32 ul_shm_base_virt;	/* Dsp Virt SM base addr */
 	u32 ul_tlb_base_virt;	/* Base of MMU TLB entry */
 	/* Offset of shm_base_virt from tlb_base_virt */
 	u32 ul_shm_offset_virt;
+	s32 entry_ndx;
+	s32 itmp_entry_ndx = 0;	/* DSP-MMU TLB entry base address */
 	struct cfg_hostres *resources = NULL;
 	u32 temp;
 	u32 ul_dsp_clk_rate;
@@ -305,12 +399,12 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 	ul_shm_base_virt *= DSPWORDSIZE;
 	DBC_ASSERT(ul_shm_base_virt != 0);
 	/* DSP Virtual address */
-	ul_tlb_base_virt = dev_context->sh_s.seg0_da;
+	ul_tlb_base_virt = dev_context->atlb_entry[0].ul_dsp_va;
 	DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
 	ul_shm_offset_virt =
 	    ul_shm_base_virt - (ul_tlb_base_virt * DSPWORDSIZE);
 	/* Kernel logical address */
-	ul_shm_base = dev_context->sh_s.seg0_va + ul_shm_offset_virt;
+	ul_shm_base = dev_context->atlb_entry[0].ul_gpp_va + ul_shm_offset_virt;
 
 	DBC_ASSERT(ul_shm_base != 0);
 	/* 2nd wd is used as sync field */
@@ -345,83 +439,78 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 					OMAP343X_CONTROL_IVA2_BOOTMOD));
 		}
 	}
-
 	if (!status) {
+		/* Reset and Unreset the RST2, so that BOOTADDR is copied to
+		 * IVA2 SYSC register */
+		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK,
+			OMAP3430_RST2_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+		udelay(100);
 		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK, 0,
 					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-		mmu = dev_context->dsp_mmu;
-		if (mmu)
-			dsp_mmu_exit(mmu);
-		mmu = dsp_mmu_init();
-		if (IS_ERR(mmu)) {
-			dev_err(bridge, "dsp_mmu_init failed!\n");
-			dev_context->dsp_mmu = NULL;
-			status = (int)mmu;
-		}
-	}
-	if (!status) {
-		dev_context->dsp_mmu = mmu;
-		sm_sg = &dev_context->sh_s;
-		sg0_da = iommu_kmap(mmu, sm_sg->seg0_da, sm_sg->seg0_pa,
-			sm_sg->seg0_size, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-		if (IS_ERR_VALUE(sg0_da)) {
-			status = (int)sg0_da;
-			sg0_da = 0;
-		}
-	}
-	if (!status) {
-		sg1_da = iommu_kmap(mmu, sm_sg->seg1_da, sm_sg->seg1_pa,
-			sm_sg->seg1_size, IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-		if (IS_ERR_VALUE(sg1_da)) {
-			status = (int)sg1_da;
-			sg1_da = 0;
-		}
-	}
-	if (!status) {
-		u32 da;
-		for (tlb_i = 0; tlb_i < BRDIOCTL_NUMOFMMUTLB; tlb_i++) {
-			if (!tlb[tlb_i].ul_gpp_pa)
+		udelay(100);
+
+		/* Disbale the DSP MMU */
+		hw_mmu_disable(resources->dw_dmmu_base);
+		/* Disable TWL */
+		hw_mmu_twl_disable(resources->dw_dmmu_base);
+
+		/* Only make TLB entry if both addresses are non-zero */
+		for (entry_ndx = 0; entry_ndx < BRDIOCTL_NUMOFMMUTLB;
+		     entry_ndx++) {
+			struct bridge_ioctl_extproc *e = &dev_context->atlb_entry[entry_ndx];
+			struct hw_mmu_map_attrs_t map_attrs = {
+				.endianism = e->endianism,
+				.element_size = e->elem_size,
+				.mixed_size = e->mixed_mode,
+			};
+
+			if (!e->ul_gpp_pa || !e->ul_dsp_va)
 				continue;
 
-			dev_dbg(bridge, "IOMMU %d GppPa: 0x%x DspVa 0x%x Size"
-				" 0x%x\n", tlb_i, tlb[tlb_i].ul_gpp_pa,
-				tlb[tlb_i].ul_dsp_va, tlb[tlb_i].ul_size);
-
-			da = iommu_kmap(mmu, tlb[tlb_i].ul_dsp_va,
-				tlb[tlb_i].ul_gpp_pa, PAGE_SIZE,
-				IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-			if (IS_ERR_VALUE(da)) {
-				status = (int)da;
-				break;
-			}
-		}
-	}
-	if (!status) {
-		u32 da;
-		l4_i = 0;
-		while (l4_peripheral_table[l4_i].phys_addr) {
-			da = iommu_kmap(mmu, l4_peripheral_table[l4_i].
-				dsp_virt_addr, l4_peripheral_table[l4_i].
-				phys_addr, PAGE_SIZE,
-				IOVMF_ENDIAN_LITTLE | IOVMF_ELSZ_32);
-			if (IS_ERR_VALUE(da)) {
-				status = (int)da;
-				break;
-			}
-			l4_i++;
+			dev_dbg(bridge,
+					"MMU %d, pa: 0x%x, va: 0x%x, size: 0x%x",
+					itmp_entry_ndx,
+					e->ul_gpp_pa,
+					e->ul_dsp_va,
+					e->ul_size);
+
+			hw_mmu_tlb_add(dev_context->dw_dsp_mmu_base,
+					e->ul_gpp_pa,
+					e->ul_dsp_va,
+					e->ul_size,
+					itmp_entry_ndx,
+					&map_attrs, 1, 1);
+
+			itmp_entry_ndx++;
 		}
 	}
 
 	/* Lock the above TLB entries and get the BIOS and load monitor timer
 	 * information */
 	if (!status) {
+		hw_mmu_num_locked_set(resources->dw_dmmu_base, itmp_entry_ndx);
+		hw_mmu_victim_num_set(resources->dw_dmmu_base, itmp_entry_ndx);
+		hw_mmu_ttb_set(resources->dw_dmmu_base,
+			       dev_context->pt_attrs->l1_base_pa);
+		hw_mmu_twl_enable(resources->dw_dmmu_base);
+		/* Enable the SmartIdle and AutoIdle bit for MMU_SYSCONFIG */
+
+		temp = __raw_readl((resources->dw_dmmu_base) + 0x10);
+		temp = (temp & 0xFFFFFFEF) | 0x11;
+		__raw_writel(temp, (resources->dw_dmmu_base) + 0x10);
+
+		/* Let the DSP MMU run */
+		hw_mmu_enable(resources->dw_dmmu_base);
+
 		/* Enable the BIOS clock */
 		(void)dev_get_symbol(dev_context->hdev_obj,
 				     BRIDGEINIT_BIOSGPTIMER, &ul_bios_gp_timer);
 		(void)dev_get_symbol(dev_context->hdev_obj,
 				     BRIDGEINIT_LOADMON_GPTIMER,
 				     &ul_load_monitor_timer);
+	}
 
+	if (!status) {
 		if (ul_load_monitor_timer != 0xFFFF) {
 			clk_cmd = (BPWR_ENABLE_CLOCK << MBX_PM_CLK_CMDSHIFT) |
 			    ul_load_monitor_timer;
@@ -430,7 +519,9 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 			dev_dbg(bridge, "Not able to get the symbol for Load "
 				"Monitor Timer\n");
 		}
+	}
 
+	if (!status) {
 		if (ul_bios_gp_timer != 0xFFFF) {
 			clk_cmd = (BPWR_ENABLE_CLOCK << MBX_PM_CLK_CMDSHIFT) |
 			    ul_bios_gp_timer;
@@ -439,7 +530,9 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 			dev_dbg(bridge,
 				"Not able to get the symbol for BIOS Timer\n");
 		}
+	}
 
+	if (!status) {
 		/* Set the DSP clock rate */
 		(void)dev_get_symbol(dev_context->hdev_obj,
 				     "_BRIDGEINIT_DSP_FREQ", &ul_dsp_clk_addr);
@@ -492,6 +585,9 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 
 		/* Let DSP go */
 		dev_dbg(bridge, "%s Unreset\n", __func__);
+		/* Enable DSP MMU Interrupts */
+		hw_mmu_event_enable(resources->dw_dmmu_base,
+				    HW_MMU_ALL_INTERRUPTS);
 		/* release the RST1, DSP starts executing now .. */
 		(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, 0,
 					OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
@@ -521,23 +617,11 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt,
 
 			/* update board state */
 			dev_context->dw_brd_state = BRD_RUNNING;
-			return 0;
+			/* (void)chnlsm_enable_interrupt(dev_context); */
 		} else {
 			dev_context->dw_brd_state = BRD_UNKNOWN;
 		}
 	}
-
-	while (tlb_i--) {
-		if (!tlb[tlb_i].ul_gpp_pa)
-			continue;
-		iommu_kunmap(mmu, tlb[tlb_i].ul_gpp_va);
-	}
-	while (l4_i--)
-		iommu_kunmap(mmu, l4_peripheral_table[l4_i].dsp_virt_addr);
-	if (sg0_da)
-		iommu_kunmap(mmu, sg0_da);
-	if (sg1_da)
-		iommu_kunmap(mmu, sg1_da);
 	return status;
 }
 
@@ -553,9 +637,8 @@ static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt)
 {
 	int status = 0;
 	struct bridge_dev_context *dev_context = dev_ctxt;
+	struct pg_table_attrs *pt_attrs;
 	u32 dsp_pwr_state;
-	int i;
-	struct bridge_ioctl_extproc *tlb = dev_context->atlb_entry;
 	struct omap_dsp_platform_data *pdata =
 		omap_dspbridge_dev->dev.platform_data;
 
@@ -591,37 +674,23 @@ static int bridge_brd_stop(struct bridge_dev_context *dev_ctxt)
 
 	dsp_wdt_enable(false);
 
-	/* Reset DSP */
-	(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK,
-		OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
-
+	/* This is a good place to clear the MMU page tables as well */
+	if (dev_context->pt_attrs) {
+		pt_attrs = dev_context->pt_attrs;
+		memset((u8 *) pt_attrs->l1_base_va, 0x00, pt_attrs->l1_size);
+		memset((u8 *) pt_attrs->l2_base_va, 0x00, pt_attrs->l2_size);
+		memset((u8 *) pt_attrs->pg_info, 0x00,
+		       (pt_attrs->l2_num_pages * sizeof(struct page_info)));
+	}
 	/* Disable the mailbox interrupts */
 	if (dev_context->mbox) {
 		omap_mbox_disable_irq(dev_context->mbox, IRQ_RX);
 		omap_mbox_put(dev_context->mbox);
 		dev_context->mbox = NULL;
 	}
-	if (dev_context->dsp_mmu) {
-		pr_err("Proc stop mmu if statement\n");
-		for (i = 0; i < BRDIOCTL_NUMOFMMUTLB; i++) {
-			if (!tlb[i].ul_gpp_pa)
-				continue;
-			iommu_kunmap(dev_context->dsp_mmu, tlb[i].ul_gpp_va);
-		}
-		i = 0;
-		while (l4_peripheral_table[i].phys_addr) {
-			iommu_kunmap(dev_context->dsp_mmu,
-				l4_peripheral_table[i].dsp_virt_addr);
-			i++;
-		}
-		iommu_kunmap(dev_context->dsp_mmu, dev_context->sh_s.seg0_da);
-		iommu_kunmap(dev_context->dsp_mmu, dev_context->sh_s.seg1_da);
-		dsp_mmu_exit(dev_context->dsp_mmu);
-		dev_context->dsp_mmu = NULL;
-	}
-	/* Reset IVA IOMMU*/
-	(*pdata->dsp_prm_rmw_bits)(OMAP3430_RST2_IVA2_MASK,
-		OMAP3430_RST2_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
+	/* Reset IVA2 clocks*/
+	(*pdata->dsp_prm_write)(OMAP3430_RST1_IVA2_MASK | OMAP3430_RST2_IVA2_MASK |
+			OMAP3430_RST3_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL);
 
 	dsp_clock_disable_all(dev_context->dsp_per_clks);
 	dsp_clk_disable(DSP_CLK_IVA2);
@@ -681,6 +750,10 @@ static int bridge_dev_create(struct bridge_dev_context
 	struct bridge_dev_context *dev_context = NULL;
 	s32 entry_ndx;
 	struct cfg_hostres *resources = config_param;
+	struct pg_table_attrs *pt_attrs;
+	u32 pg_tbl_pa;
+	u32 pg_tbl_va;
+	u32 align_size;
 	struct drv_data *drv_datap = dev_get_drvdata(bridge);
 
 	/* Allocate and initialize a data structure to contain the bridge driver
@@ -711,8 +784,97 @@ static int bridge_dev_create(struct bridge_dev_context
 	if (!dev_context->dw_dsp_base_addr)
 		status = -EPERM;
 
+	pt_attrs = kzalloc(sizeof(struct pg_table_attrs), GFP_KERNEL);
+	if (pt_attrs != NULL) {
+		/* Assuming that we use only DSP's memory map
+		 * until 0x4000:0000 , we would need only 1024
+		 * L1 enties i.e L1 size = 4K */
+		pt_attrs->l1_size = 0x1000;
+		align_size = pt_attrs->l1_size;
+		/* Align sizes are expected to be power of 2 */
+		/* we like to get aligned on L1 table size */
+		pg_tbl_va = (u32) mem_alloc_phys_mem(pt_attrs->l1_size,
+						     align_size, &pg_tbl_pa);
+
+		/* Check if the PA is aligned for us */
+		if ((pg_tbl_pa) & (align_size - 1)) {
+			/* PA not aligned to page table size ,
+			 * try with more allocation and align */
+			mem_free_phys_mem((void *)pg_tbl_va, pg_tbl_pa,
+					  pt_attrs->l1_size);
+			/* we like to get aligned on L1 table size */
+			pg_tbl_va =
+			    (u32) mem_alloc_phys_mem((pt_attrs->l1_size) * 2,
+						     align_size, &pg_tbl_pa);
+			/* We should be able to get aligned table now */
+			pt_attrs->l1_tbl_alloc_pa = pg_tbl_pa;
+			pt_attrs->l1_tbl_alloc_va = pg_tbl_va;
+			pt_attrs->l1_tbl_alloc_sz = pt_attrs->l1_size * 2;
+			/* Align the PA to the next 'align'  boundary */
+			pt_attrs->l1_base_pa =
+			    ((pg_tbl_pa) +
+			     (align_size - 1)) & (~(align_size - 1));
+			pt_attrs->l1_base_va =
+			    pg_tbl_va + (pt_attrs->l1_base_pa - pg_tbl_pa);
+		} else {
+			/* We got aligned PA, cool */
+			pt_attrs->l1_tbl_alloc_pa = pg_tbl_pa;
+			pt_attrs->l1_tbl_alloc_va = pg_tbl_va;
+			pt_attrs->l1_tbl_alloc_sz = pt_attrs->l1_size;
+			pt_attrs->l1_base_pa = pg_tbl_pa;
+			pt_attrs->l1_base_va = pg_tbl_va;
+		}
+		if (pt_attrs->l1_base_va)
+			memset((u8 *) pt_attrs->l1_base_va, 0x00,
+			       pt_attrs->l1_size);
+
+		/* number of L2 page tables = DMM pool used + SHMMEM +EXTMEM +
+		 * L4 pages */
+		pt_attrs->l2_num_pages = ((DMMPOOLSIZE >> 20) + 6);
+		pt_attrs->l2_size = HW_MMU_COARSE_PAGE_SIZE *
+		    pt_attrs->l2_num_pages;
+		align_size = 4;	/* Make it u32 aligned */
+		/* we like to get aligned on L1 table size */
+		pg_tbl_va = (u32) mem_alloc_phys_mem(pt_attrs->l2_size,
+						     align_size, &pg_tbl_pa);
+		pt_attrs->l2_tbl_alloc_pa = pg_tbl_pa;
+		pt_attrs->l2_tbl_alloc_va = pg_tbl_va;
+		pt_attrs->l2_tbl_alloc_sz = pt_attrs->l2_size;
+		pt_attrs->l2_base_pa = pg_tbl_pa;
+		pt_attrs->l2_base_va = pg_tbl_va;
+
+		if (pt_attrs->l2_base_va)
+			memset((u8 *) pt_attrs->l2_base_va, 0x00,
+			       pt_attrs->l2_size);
+
+		pt_attrs->pg_info = kzalloc(pt_attrs->l2_num_pages *
+					sizeof(struct page_info), GFP_KERNEL);
+		dev_dbg(bridge,
+			"L1 pa %x, va %x, size %x\n L2 pa %x, va "
+			"%x, size %x\n", pt_attrs->l1_base_pa,
+			pt_attrs->l1_base_va, pt_attrs->l1_size,
+			pt_attrs->l2_base_pa, pt_attrs->l2_base_va,
+			pt_attrs->l2_size);
+		dev_dbg(bridge, "pt_attrs %p L2 NumPages %x pg_info %p\n",
+			pt_attrs, pt_attrs->l2_num_pages, pt_attrs->pg_info);
+	}
+	if ((pt_attrs != NULL) && (pt_attrs->l1_base_va != 0) &&
+	    (pt_attrs->l2_base_va != 0) && (pt_attrs->pg_info != NULL))
+		dev_context->pt_attrs = pt_attrs;
+	else
+		status = -ENOMEM;
+
 	if (!status) {
+		spin_lock_init(&pt_attrs->pg_lock);
 		dev_context->tc_word_swap_on = drv_datap->tc_wordswapon;
+
+		/* Set the Clock Divisor for the DSP module */
+		udelay(5);
+		/* MMU address is obtained from the host
+		 * resources struct */
+		dev_context->dw_dsp_mmu_base = resources->dw_dmmu_base;
+	}
+	if (!status) {
 		dev_context->hdev_obj = hdev_obj;
 		/* Store current board state. */
 		dev_context->dw_brd_state = BRD_UNKNOWN;
@@ -722,6 +884,23 @@ static int bridge_dev_create(struct bridge_dev_context
 		/* Return ptr to our device state to the DSP API for storage */
 		*dev_cntxt = dev_context;
 	} else {
+		if (pt_attrs != NULL) {
+			kfree(pt_attrs->pg_info);
+
+			if (pt_attrs->l2_tbl_alloc_va) {
+				mem_free_phys_mem((void *)
+						  pt_attrs->l2_tbl_alloc_va,
+						  pt_attrs->l2_tbl_alloc_pa,
+						  pt_attrs->l2_tbl_alloc_sz);
+			}
+			if (pt_attrs->l1_tbl_alloc_va) {
+				mem_free_phys_mem((void *)
+						  pt_attrs->l1_tbl_alloc_va,
+						  pt_attrs->l1_tbl_alloc_pa,
+						  pt_attrs->l1_tbl_alloc_sz);
+			}
+		}
+		kfree(pt_attrs);
 		kfree(dev_context);
 	}
 func_end:
@@ -789,6 +968,7 @@ static int bridge_dev_ctrl(struct bridge_dev_context *dev_context,
  */
 static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt)
 {
+	struct pg_table_attrs *pt_attrs;
 	int status = 0;
 	struct bridge_dev_context *dev_context = (struct bridge_dev_context *)
 	    dev_ctxt;
@@ -802,6 +982,23 @@ static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt)
 
 	/* first put the device to stop state */
 	bridge_brd_stop(dev_context);
+	if (dev_context->pt_attrs) {
+		pt_attrs = dev_context->pt_attrs;
+		kfree(pt_attrs->pg_info);
+
+		if (pt_attrs->l2_tbl_alloc_va) {
+			mem_free_phys_mem((void *)pt_attrs->l2_tbl_alloc_va,
+					  pt_attrs->l2_tbl_alloc_pa,
+					  pt_attrs->l2_tbl_alloc_sz);
+		}
+		if (pt_attrs->l1_tbl_alloc_va) {
+			mem_free_phys_mem((void *)pt_attrs->l1_tbl_alloc_va,
+					  pt_attrs->l1_tbl_alloc_pa,
+					  pt_attrs->l1_tbl_alloc_sz);
+		}
+		kfree(pt_attrs);
+
+	}
 
 	if (dev_context->resources) {
 		host_res = dev_context->resources;
@@ -832,6 +1029,8 @@ static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt)
 			iounmap((void *)host_res->dw_mem_base[3]);
 		if (host_res->dw_mem_base[4])
 			iounmap((void *)host_res->dw_mem_base[4]);
+		if (host_res->dw_dmmu_base)
+			iounmap(host_res->dw_dmmu_base);
 		if (host_res->dw_per_base)
 			iounmap(host_res->dw_per_base);
 		if (host_res->dw_per_pm_base)
@@ -845,6 +1044,7 @@ static int bridge_dev_destroy(struct bridge_dev_context *dev_ctxt)
 		host_res->dw_mem_base[2] = (u32) NULL;
 		host_res->dw_mem_base[3] = (u32) NULL;
 		host_res->dw_mem_base[4] = (u32) NULL;
+		host_res->dw_dmmu_base = NULL;
 		host_res->dw_sys_ctrl_base = NULL;
 
 		kfree(host_res);
@@ -928,6 +1128,673 @@ static int bridge_brd_mem_write(struct bridge_dev_context *dev_ctxt,
 }
 
 /*
+ *  ======== bridge_brd_mem_map ========
+ *      This function maps MPU buffer to the DSP address space. It performs
+ *  linear to physical address translation if required. It translates each
+ *  page since linear addresses can be physically non-contiguous
+ *  All address & size arguments are assumed to be page aligned (in proc.c)
+ *
+ *  TODO: Disable MMU while updating the page tables (but that'll stall DSP)
+ */
+static int bridge_brd_mem_map(struct bridge_dev_context *dev_ctxt,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes, u32 ul_map_attr,
+				  struct page **mapped_pages)
+{
+	u32 attrs;
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	struct hw_mmu_map_attrs_t hw_attrs;
+	struct vm_area_struct *vma;
+	struct mm_struct *mm = current->mm;
+	u32 write = 0;
+	u32 num_usr_pgs = 0;
+	struct page *mapped_page, *pg;
+	s32 pg_num;
+	u32 va = virt_addr;
+	struct task_struct *curr_task = current;
+	u32 pg_i = 0;
+	u32 mpu_addr, pa;
+
+	dev_dbg(bridge,
+		"%s hDevCtxt %p, pa %x, va %x, size %x, ul_map_attr %x\n",
+		__func__, dev_ctxt, ul_mpu_addr, virt_addr, ul_num_bytes,
+		ul_map_attr);
+	if (ul_num_bytes == 0)
+		return -EINVAL;
+
+	if (ul_map_attr & DSP_MAP_DIR_MASK) {
+		attrs = ul_map_attr;
+	} else {
+		/* Assign default attributes */
+		attrs = ul_map_attr | (DSP_MAPVIRTUALADDR | DSP_MAPELEMSIZE16);
+	}
+	/* Take mapping properties */
+	if (attrs & DSP_MAPBIGENDIAN)
+		hw_attrs.endianism = HW_BIG_ENDIAN;
+	else
+		hw_attrs.endianism = HW_LITTLE_ENDIAN;
+
+	hw_attrs.mixed_size = (enum hw_mmu_mixed_size_t)
+	    ((attrs & DSP_MAPMIXEDELEMSIZE) >> 2);
+	/* Ignore element_size if mixed_size is enabled */
+	if (hw_attrs.mixed_size == 0) {
+		if (attrs & DSP_MAPELEMSIZE8) {
+			/* Size is 8 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE8BIT;
+		} else if (attrs & DSP_MAPELEMSIZE16) {
+			/* Size is 16 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE16BIT;
+		} else if (attrs & DSP_MAPELEMSIZE32) {
+			/* Size is 32 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE32BIT;
+		} else if (attrs & DSP_MAPELEMSIZE64) {
+			/* Size is 64 bit */
+			hw_attrs.element_size = HW_ELEM_SIZE64BIT;
+		} else {
+			/*
+			 * Mixedsize isn't enabled, so size can't be
+			 * zero here
+			 */
+			return -EINVAL;
+		}
+	}
+	if (attrs & DSP_MAPDONOTLOCK)
+		hw_attrs.donotlockmpupage = 1;
+	else
+		hw_attrs.donotlockmpupage = 0;
+
+	if (attrs & DSP_MAPVMALLOCADDR) {
+		return mem_map_vmalloc(dev_ctxt, ul_mpu_addr, virt_addr,
+				       ul_num_bytes, &hw_attrs);
+	}
+	/*
+	 * Do OS-specific user-va to pa translation.
+	 * Combine physically contiguous regions to reduce TLBs.
+	 * Pass the translated pa to pte_update.
+	 */
+	if ((attrs & DSP_MAPPHYSICALADDR)) {
+		status = pte_update(dev_context, ul_mpu_addr, virt_addr,
+				    ul_num_bytes, &hw_attrs);
+		goto func_cont;
+	}
+
+	/*
+	 * Important Note: ul_mpu_addr is mapped from user application process
+	 * to current process - it must lie completely within the current
+	 * virtual memory address space in order to be of use to us here!
+	 */
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, ul_mpu_addr);
+	if (vma)
+		dev_dbg(bridge,
+			"VMAfor UserBuf: ul_mpu_addr=%x, ul_num_bytes=%x, "
+			"vm_start=%lx, vm_end=%lx, vm_flags=%lx\n", ul_mpu_addr,
+			ul_num_bytes, vma->vm_start, vma->vm_end,
+			vma->vm_flags);
+
+	/*
+	 * It is observed that under some circumstances, the user buffer is
+	 * spread across several VMAs. So loop through and check if the entire
+	 * user buffer is covered
+	 */
+	while ((vma) && (ul_mpu_addr + ul_num_bytes > vma->vm_end)) {
+		/* jump to the next VMA region */
+		vma = find_vma(mm, vma->vm_end + 1);
+		dev_dbg(bridge,
+			"VMA for UserBuf ul_mpu_addr=%x ul_num_bytes=%x, "
+			"vm_start=%lx, vm_end=%lx, vm_flags=%lx\n", ul_mpu_addr,
+			ul_num_bytes, vma->vm_start, vma->vm_end,
+			vma->vm_flags);
+	}
+	if (!vma) {
+		pr_err("%s: Failed to get VMA region for 0x%x (%d)\n",
+		       __func__, ul_mpu_addr, ul_num_bytes);
+		status = -EINVAL;
+		up_read(&mm->mmap_sem);
+		goto func_cont;
+	}
+
+	if (vma->vm_flags & VM_IO) {
+		num_usr_pgs = ul_num_bytes / PG_SIZE4K;
+		mpu_addr = ul_mpu_addr;
+
+		/* Get the physical addresses for user buffer */
+		for (pg_i = 0; pg_i < num_usr_pgs; pg_i++) {
+			pa = user_va2_pa(mm, mpu_addr);
+			if (!pa) {
+				status = -EPERM;
+				pr_err("DSPBRIDGE: VM_IO mapping physical"
+				       "address is invalid\n");
+				break;
+			}
+			if (pfn_valid(__phys_to_pfn(pa))) {
+				pg = PHYS_TO_PAGE(pa);
+				get_page(pg);
+				if (page_count(pg) < 1) {
+					pr_err("Bad page in VM_IO buffer\n");
+					bad_page_dump(pa, pg);
+				}
+			}
+			status = pte_set(dev_context->pt_attrs, pa,
+					 va, HW_PAGE_SIZE4KB, &hw_attrs);
+			if (status)
+				break;
+
+			va += HW_PAGE_SIZE4KB;
+			mpu_addr += HW_PAGE_SIZE4KB;
+			pa += HW_PAGE_SIZE4KB;
+		}
+	} else {
+		num_usr_pgs = ul_num_bytes / PG_SIZE4K;
+		if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE))
+			write = 1;
+
+		for (pg_i = 0; pg_i < num_usr_pgs; pg_i++) {
+			pg_num = get_user_pages(curr_task, mm, ul_mpu_addr, 1,
+						write, 1, &mapped_page, NULL);
+			if (pg_num > 0) {
+				if (page_count(mapped_page) < 1) {
+					pr_err("Bad page count after doing"
+					       "get_user_pages on"
+					       "user buffer\n");
+					bad_page_dump(page_to_phys(mapped_page),
+						      mapped_page);
+				}
+				status = pte_set(dev_context->pt_attrs,
+						 page_to_phys(mapped_page), va,
+						 HW_PAGE_SIZE4KB, &hw_attrs);
+				if (status)
+					break;
+
+				if (mapped_pages)
+					mapped_pages[pg_i] = mapped_page;
+
+				va += HW_PAGE_SIZE4KB;
+				ul_mpu_addr += HW_PAGE_SIZE4KB;
+			} else {
+				pr_err("DSPBRIDGE: get_user_pages FAILED,"
+				       "MPU addr = 0x%x,"
+				       "vma->vm_flags = 0x%lx,"
+				       "get_user_pages Err"
+				       "Value = %d, Buffer"
+				       "size=0x%x\n", ul_mpu_addr,
+				       vma->vm_flags, pg_num, ul_num_bytes);
+				status = -EPERM;
+				break;
+			}
+		}
+	}
+	up_read(&mm->mmap_sem);
+func_cont:
+	if (status) {
+		/*
+		 * Roll out the mapped pages incase it failed in middle of
+		 * mapping
+		 */
+		if (pg_i) {
+			bridge_brd_mem_un_map(dev_context, virt_addr,
+					   (pg_i * PG_SIZE4K));
+		}
+		status = -EPERM;
+	}
+	/*
+	 * In any case, flush the TLB
+	 * This is called from here instead from pte_update to avoid unnecessary
+	 * repetition while mapping non-contiguous physical regions of a virtual
+	 * region
+	 */
+	flush_all(dev_context);
+	dev_dbg(bridge, "%s status %x\n", __func__, status);
+	return status;
+}
+
+/*
+ *  ======== bridge_brd_mem_un_map ========
+ *      Invalidate the PTEs for the DSP VA block to be unmapped.
+ *
+ *      PTEs of a mapped memory block are contiguous in any page table
+ *      So, instead of looking up the PTE address for every 4K block,
+ *      we clear consecutive PTEs until we unmap all the bytes
+ */
+static int bridge_brd_mem_un_map(struct bridge_dev_context *dev_ctxt,
+				     u32 virt_addr, u32 ul_num_bytes)
+{
+	u32 l1_base_va;
+	u32 l2_base_va;
+	u32 l2_base_pa;
+	u32 l2_page_num;
+	u32 pte_val;
+	u32 pte_size;
+	u32 pte_count;
+	u32 pte_addr_l1;
+	u32 pte_addr_l2 = 0;
+	u32 rem_bytes;
+	u32 rem_bytes_l2;
+	u32 va_curr;
+	struct page *pg = NULL;
+	int status = 0;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	struct pg_table_attrs *pt = dev_context->pt_attrs;
+	u32 temp;
+	u32 paddr;
+	u32 numof4k_pages = 0;
+
+	va_curr = virt_addr;
+	rem_bytes = ul_num_bytes;
+	rem_bytes_l2 = 0;
+	l1_base_va = pt->l1_base_va;
+	pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va_curr);
+	dev_dbg(bridge, "%s dev_ctxt %p, va %x, NumBytes %x l1_base_va %x, "
+		"pte_addr_l1 %x\n", __func__, dev_ctxt, virt_addr,
+		ul_num_bytes, l1_base_va, pte_addr_l1);
+
+	while (rem_bytes && !status) {
+		u32 va_curr_orig = va_curr;
+		/* Find whether the L1 PTE points to a valid L2 PT */
+		pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va_curr);
+		pte_val = *(u32 *) pte_addr_l1;
+		pte_size = hw_mmu_pte_size_l1(pte_val);
+
+		if (pte_size != HW_MMU_COARSE_PAGE_SIZE)
+			goto skip_coarse_page;
+
+		/*
+		 * Get the L2 PA from the L1 PTE, and find
+		 * corresponding L2 VA
+		 */
+		l2_base_pa = hw_mmu_pte_coarse_l1(pte_val);
+		l2_base_va = l2_base_pa - pt->l2_base_pa + pt->l2_base_va;
+		l2_page_num =
+		    (l2_base_pa - pt->l2_base_pa) / HW_MMU_COARSE_PAGE_SIZE;
+		/*
+		 * Find the L2 PTE address from which we will start
+		 * clearing, the number of PTEs to be cleared on this
+		 * page, and the size of VA space that needs to be
+		 * cleared on this L2 page
+		 */
+		pte_addr_l2 = hw_mmu_pte_addr_l2(l2_base_va, va_curr);
+		pte_count = pte_addr_l2 & (HW_MMU_COARSE_PAGE_SIZE - 1);
+		pte_count = (HW_MMU_COARSE_PAGE_SIZE - pte_count) / sizeof(u32);
+		if (rem_bytes < (pte_count * PG_SIZE4K))
+			pte_count = rem_bytes / PG_SIZE4K;
+		rem_bytes_l2 = pte_count * PG_SIZE4K;
+
+		/*
+		 * Unmap the VA space on this L2 PT. A quicker way
+		 * would be to clear pte_count entries starting from
+		 * pte_addr_l2. However, below code checks that we don't
+		 * clear invalid entries or less than 64KB for a 64KB
+		 * entry. Similar checking is done for L1 PTEs too
+		 * below
+		 */
+		while (rem_bytes_l2 && !status) {
+			pte_val = *(u32 *) pte_addr_l2;
+			pte_size = hw_mmu_pte_size_l2(pte_val);
+			/* va_curr aligned to pte_size? */
+			if (pte_size == 0 || rem_bytes_l2 < pte_size ||
+			    va_curr & (pte_size - 1)) {
+				status = -EPERM;
+				break;
+			}
+
+			/* Collect Physical addresses from VA */
+			paddr = (pte_val & ~(pte_size - 1));
+			if (pte_size == HW_PAGE_SIZE64KB)
+				numof4k_pages = 16;
+			else
+				numof4k_pages = 1;
+			temp = 0;
+			while (temp++ < numof4k_pages) {
+				if (!pfn_valid(__phys_to_pfn(paddr))) {
+					paddr += HW_PAGE_SIZE4KB;
+					continue;
+				}
+				pg = PHYS_TO_PAGE(paddr);
+				if (page_count(pg) < 1) {
+					pr_info("DSPBRIDGE: UNMAP function: "
+						"COUNT 0 FOR PA 0x%x, size = "
+						"0x%x\n", paddr, ul_num_bytes);
+					bad_page_dump(paddr, pg);
+				} else {
+					set_page_dirty(pg);
+					page_cache_release(pg);
+				}
+				paddr += HW_PAGE_SIZE4KB;
+			}
+			if (hw_mmu_pte_clear(pte_addr_l2, va_curr, pte_size)) {
+				status = -EPERM;
+				goto EXIT_LOOP;
+			}
+
+			status = 0;
+			rem_bytes_l2 -= pte_size;
+			va_curr += pte_size;
+			pte_addr_l2 += (pte_size >> 12) * sizeof(u32);
+		}
+		spin_lock(&pt->pg_lock);
+		if (rem_bytes_l2 == 0) {
+			pt->pg_info[l2_page_num].num_entries -= pte_count;
+			if (pt->pg_info[l2_page_num].num_entries == 0) {
+				/*
+				 * Clear the L1 PTE pointing to the L2 PT
+				 */
+				if (!hw_mmu_pte_clear(l1_base_va, va_curr_orig,
+						     HW_MMU_COARSE_PAGE_SIZE))
+					status = 0;
+				else {
+					status = -EPERM;
+					spin_unlock(&pt->pg_lock);
+					goto EXIT_LOOP;
+				}
+			}
+			rem_bytes -= pte_count * PG_SIZE4K;
+		} else
+			status = -EPERM;
+
+		spin_unlock(&pt->pg_lock);
+		continue;
+skip_coarse_page:
+		/* va_curr aligned to pte_size? */
+		/* pte_size = 1 MB or 16 MB */
+		if (pte_size == 0 || rem_bytes < pte_size ||
+		    va_curr & (pte_size - 1)) {
+			status = -EPERM;
+			break;
+		}
+
+		if (pte_size == HW_PAGE_SIZE1MB)
+			numof4k_pages = 256;
+		else
+			numof4k_pages = 4096;
+		temp = 0;
+		/* Collect Physical addresses from VA */
+		paddr = (pte_val & ~(pte_size - 1));
+		while (temp++ < numof4k_pages) {
+			if (pfn_valid(__phys_to_pfn(paddr))) {
+				pg = PHYS_TO_PAGE(paddr);
+				if (page_count(pg) < 1) {
+					pr_info("DSPBRIDGE: UNMAP function: "
+						"COUNT 0 FOR PA 0x%x, size = "
+						"0x%x\n", paddr, ul_num_bytes);
+					bad_page_dump(paddr, pg);
+				} else {
+					set_page_dirty(pg);
+					page_cache_release(pg);
+				}
+			}
+			paddr += HW_PAGE_SIZE4KB;
+		}
+		if (!hw_mmu_pte_clear(l1_base_va, va_curr, pte_size)) {
+			status = 0;
+			rem_bytes -= pte_size;
+			va_curr += pte_size;
+		} else {
+			status = -EPERM;
+			goto EXIT_LOOP;
+		}
+	}
+	/*
+	 * It is better to flush the TLB here, so that any stale old entries
+	 * get flushed
+	 */
+EXIT_LOOP:
+	flush_all(dev_context);
+	dev_dbg(bridge,
+		"%s: va_curr %x, pte_addr_l1 %x pte_addr_l2 %x rem_bytes %x,"
+		" rem_bytes_l2 %x status %x\n", __func__, va_curr, pte_addr_l1,
+		pte_addr_l2, rem_bytes, rem_bytes_l2, status);
+	return status;
+}
+
+/*
+ *  ======== user_va2_pa ========
+ *  Purpose:
+ *      This function walks through the page tables to convert a userland
+ *      virtual address to physical address
+ */
+static u32 user_va2_pa(struct mm_struct *mm, u32 address)
+{
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *ptep, pte;
+
+	pgd = pgd_offset(mm, address);
+	if (!(pgd_none(*pgd) || pgd_bad(*pgd))) {
+		pmd = pmd_offset(pgd, address);
+		if (!(pmd_none(*pmd) || pmd_bad(*pmd))) {
+			ptep = pte_offset_map(pmd, address);
+			if (ptep) {
+				pte = *ptep;
+				if (pte_present(pte))
+					return pte & PAGE_MASK;
+			}
+		}
+	}
+
+	return 0;
+}
+
+/*
+ *  ======== pte_update ========
+ *      This function calculates the optimum page-aligned addresses and sizes
+ *      Caller must pass page-aligned values
+ */
+static int pte_update(struct bridge_dev_context *dev_ctxt, u32 pa,
+			     u32 va, u32 size,
+			     struct hw_mmu_map_attrs_t *map_attrs)
+{
+	u32 i;
+	u32 all_bits;
+	u32 pa_curr = pa;
+	u32 va_curr = va;
+	u32 num_bytes = size;
+	struct bridge_dev_context *dev_context = dev_ctxt;
+	int status = 0;
+	u32 page_size[] = { HW_PAGE_SIZE16MB, HW_PAGE_SIZE1MB,
+		HW_PAGE_SIZE64KB, HW_PAGE_SIZE4KB
+	};
+
+	while (num_bytes && !status) {
+		/* To find the max. page size with which both PA & VA are
+		 * aligned */
+		all_bits = pa_curr | va_curr;
+
+		for (i = 0; i < 4; i++) {
+			if ((num_bytes >= page_size[i]) && ((all_bits &
+							     (page_size[i] -
+							      1)) == 0)) {
+				status =
+				    pte_set(dev_context->pt_attrs, pa_curr,
+					    va_curr, page_size[i], map_attrs);
+				pa_curr += page_size[i];
+				va_curr += page_size[i];
+				num_bytes -= page_size[i];
+				/* Don't try smaller sizes. Hopefully we have
+				 * reached an address aligned to a bigger page
+				 * size */
+				break;
+			}
+		}
+	}
+
+	return status;
+}
+
+/*
+ *  ======== pte_set ========
+ *      This function calculates PTE address (MPU virtual) to be updated
+ *      It also manages the L2 page tables
+ */
+static int pte_set(struct pg_table_attrs *pt, u32 pa, u32 va,
+			  u32 size, struct hw_mmu_map_attrs_t *attrs)
+{
+	u32 i;
+	u32 pte_val;
+	u32 pte_addr_l1;
+	u32 pte_size;
+	/* Base address of the PT that will be updated */
+	u32 pg_tbl_va;
+	u32 l1_base_va;
+	/* Compiler warns that the next three variables might be used
+	 * uninitialized in this function. Doesn't seem so. Working around,
+	 * anyways. */
+	u32 l2_base_va = 0;
+	u32 l2_base_pa = 0;
+	u32 l2_page_num = 0;
+	int status = 0;
+
+	l1_base_va = pt->l1_base_va;
+	pg_tbl_va = l1_base_va;
+	if ((size == HW_PAGE_SIZE64KB) || (size == HW_PAGE_SIZE4KB)) {
+		/* Find whether the L1 PTE points to a valid L2 PT */
+		pte_addr_l1 = hw_mmu_pte_addr_l1(l1_base_va, va);
+		if (pte_addr_l1 <= (pt->l1_base_va + pt->l1_size)) {
+			pte_val = *(u32 *) pte_addr_l1;
+			pte_size = hw_mmu_pte_size_l1(pte_val);
+		} else {
+			return -EPERM;
+		}
+		spin_lock(&pt->pg_lock);
+		if (pte_size == HW_MMU_COARSE_PAGE_SIZE) {
+			/* Get the L2 PA from the L1 PTE, and find
+			 * corresponding L2 VA */
+			l2_base_pa = hw_mmu_pte_coarse_l1(pte_val);
+			l2_base_va =
+			    l2_base_pa - pt->l2_base_pa + pt->l2_base_va;
+			l2_page_num =
+			    (l2_base_pa -
+			     pt->l2_base_pa) / HW_MMU_COARSE_PAGE_SIZE;
+		} else if (pte_size == 0) {
+			/* L1 PTE is invalid. Allocate a L2 PT and
+			 * point the L1 PTE to it */
+			/* Find a free L2 PT. */
+			for (i = 0; (i < pt->l2_num_pages) &&
+			     (pt->pg_info[i].num_entries != 0); i++)
+				;;
+			if (i < pt->l2_num_pages) {
+				l2_page_num = i;
+				l2_base_pa = pt->l2_base_pa + (l2_page_num *
+						HW_MMU_COARSE_PAGE_SIZE);
+				l2_base_va = pt->l2_base_va + (l2_page_num *
+						HW_MMU_COARSE_PAGE_SIZE);
+				/* Endianness attributes are ignored for
+				 * HW_MMU_COARSE_PAGE_SIZE */
+				status =
+				    hw_mmu_pte_set(l1_base_va, l2_base_pa, va,
+						   HW_MMU_COARSE_PAGE_SIZE,
+						   attrs);
+			} else {
+				status = -ENOMEM;
+			}
+		} else {
+			/* Found valid L1 PTE of another size.
+			 * Should not overwrite it. */
+			status = -EPERM;
+		}
+		if (!status) {
+			pg_tbl_va = l2_base_va;
+			if (size == HW_PAGE_SIZE64KB)
+				pt->pg_info[l2_page_num].num_entries += 16;
+			else
+				pt->pg_info[l2_page_num].num_entries++;
+			dev_dbg(bridge, "PTE: L2 BaseVa %x, BasePa %x, PageNum "
+				"%x, num_entries %x\n", l2_base_va,
+				l2_base_pa, l2_page_num,
+				pt->pg_info[l2_page_num].num_entries);
+		}
+		spin_unlock(&pt->pg_lock);
+	}
+	if (!status) {
+		dev_dbg(bridge, "PTE: pg_tbl_va %x, pa %x, va %x, size %x\n",
+			pg_tbl_va, pa, va, size);
+		dev_dbg(bridge, "PTE: endianism %x, element_size %x, "
+			"mixed_size %x\n", attrs->endianism,
+			attrs->element_size, attrs->mixed_size);
+		status = hw_mmu_pte_set(pg_tbl_va, pa, va, size, attrs);
+	}
+
+	return status;
+}
+
+/* Memory map kernel VA -- memory allocated with vmalloc */
+static int mem_map_vmalloc(struct bridge_dev_context *dev_context,
+				  u32 ul_mpu_addr, u32 virt_addr,
+				  u32 ul_num_bytes,
+				  struct hw_mmu_map_attrs_t *hw_attrs)
+{
+	int status = 0;
+	struct page *page[1];
+	u32 i;
+	u32 pa_curr;
+	u32 pa_next;
+	u32 va_curr;
+	u32 size_curr;
+	u32 num_pages;
+	u32 pa;
+	u32 num_of4k_pages;
+	u32 temp = 0;
+
+	/*
+	 * Do Kernel va to pa translation.
+	 * Combine physically contiguous regions to reduce TLBs.
+	 * Pass the translated pa to pte_update.
+	 */
+	num_pages = ul_num_bytes / PAGE_SIZE;	/* PAGE_SIZE = OS page size */
+	i = 0;
+	va_curr = ul_mpu_addr;
+	page[0] = vmalloc_to_page((void *)va_curr);
+	pa_next = page_to_phys(page[0]);
+	while (!status && (i < num_pages)) {
+		/*
+		 * Reuse pa_next from the previous iteraion to avoid
+		 * an extra va2pa call
+		 */
+		pa_curr = pa_next;
+		size_curr = PAGE_SIZE;
+		/*
+		 * If the next page is physically contiguous,
+		 * map it with the current one by increasing
+		 * the size of the region to be mapped
+		 */
+		while (++i < num_pages) {
+			page[0] =
+			    vmalloc_to_page((void *)(va_curr + size_curr));
+			pa_next = page_to_phys(page[0]);
+
+			if (pa_next == (pa_curr + size_curr))
+				size_curr += PAGE_SIZE;
+			else
+				break;
+
+		}
+		if (pa_next == 0) {
+			status = -ENOMEM;
+			break;
+		}
+		pa = pa_curr;
+		num_of4k_pages = size_curr / HW_PAGE_SIZE4KB;
+		while (temp++ < num_of4k_pages) {
+			get_page(PHYS_TO_PAGE(pa));
+			pa += HW_PAGE_SIZE4KB;
+		}
+		status = pte_update(dev_context, pa_curr, virt_addr +
+				    (va_curr - ul_mpu_addr), size_curr,
+				    hw_attrs);
+		va_curr += size_curr;
+	}
+	/*
+	 * In any case, flush the TLB
+	 * This is called from here instead from pte_update to avoid unnecessary
+	 * repetition while mapping non-contiguous physical regions of a virtual
+	 * region
+	 */
+	flush_all(dev_context);
+	dev_dbg(bridge, "%s status %x\n", __func__, status);
+	return status;
+}
+
+/*
  *  ======== wait_for_start ========
  *      Wait for the singal from DSP that it has started, or time out.
  */
diff --git a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
index b57a9fd5e75..fb9026e1403 100644
--- a/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
+++ b/drivers/staging/tidspbridge/core/tiomap3430_pwr.c
@@ -31,6 +31,10 @@
 #include <dspbridge/dev.h>
 #include <dspbridge/iodefs.h>
 
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
 #include <dspbridge/pwr_sh.h>
 
 /*  ----------------------------------- Bridge Driver */
diff --git a/drivers/staging/tidspbridge/core/tiomap_io.c b/drivers/staging/tidspbridge/core/tiomap_io.c
index 66dbf02549e..ba2961049da 100644
--- a/drivers/staging/tidspbridge/core/tiomap_io.c
+++ b/drivers/staging/tidspbridge/core/tiomap_io.c
@@ -134,16 +134,17 @@ int read_ext_dsp_data(struct bridge_dev_context *dev_ctxt,
 
 		if (!status) {
 			ul_tlb_base_virt =
-			    dev_context->sh_s.seg0_da * DSPWORDSIZE;
+			    dev_context->atlb_entry[0].ul_dsp_va * DSPWORDSIZE;
 			DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
-			dw_ext_prog_virt_mem = dev_context->sh_s.seg0_va;
+			dw_ext_prog_virt_mem =
+			    dev_context->atlb_entry[0].ul_gpp_va;
 
 			if (!trace_read) {
 				ul_shm_offset_virt =
 				    ul_shm_base_virt - ul_tlb_base_virt;
 				ul_shm_offset_virt +=
 				    PG_ALIGN_HIGH(ul_ext_end - ul_dyn_ext_base +
-						  1, PAGE_SIZE * 16);
+						  1, HW_PAGE_SIZE64KB);
 				dw_ext_prog_virt_mem -= ul_shm_offset_virt;
 				dw_ext_prog_virt_mem +=
 				    (ul_ext_base - ul_dyn_ext_base);
@@ -317,9 +318,8 @@ int write_ext_dsp_data(struct bridge_dev_context *dev_context,
 			ret = -EPERM;
 
 		if (!ret) {
-			ul_tlb_base_virt = dev_context->sh_s.seg0_da *
-								DSPWORDSIZE;
-
+			ul_tlb_base_virt =
+			    dev_context->atlb_entry[0].ul_dsp_va * DSPWORDSIZE;
 			DBC_ASSERT(ul_tlb_base_virt <= ul_shm_base_virt);
 
 			if (symbols_reloaded) {
@@ -337,7 +337,7 @@ int write_ext_dsp_data(struct bridge_dev_context *dev_context,
 			    ul_shm_base_virt - ul_tlb_base_virt;
 			if (trace_load) {
 				dw_ext_prog_virt_mem =
-					dev_context->sh_s.seg0_va;
+				    dev_context->atlb_entry[0].ul_gpp_va;
 			} else {
 				dw_ext_prog_virt_mem = host_res->dw_mem_base[1];
 				dw_ext_prog_virt_mem +=
@@ -393,6 +393,7 @@ int sm_interrupt_dsp(struct bridge_dev_context *dev_context, u16 mb_val)
 		omap_dspbridge_dev->dev.platform_data;
 	struct cfg_hostres *resources = dev_context->resources;
 	int status = 0;
+	u32 temp;
 
 	if (!dev_context->mbox)
 		return 0;
@@ -436,7 +437,7 @@ int sm_interrupt_dsp(struct bridge_dev_context *dev_context, u16 mb_val)
 		omap_mbox_restore_ctx(dev_context->mbox);
 
 		/* Access MMU SYS CONFIG register to generate a short wakeup */
-		iommu_read_reg(dev_context->dsp_mmu, MMU_SYSCONFIG);
+		temp = readl(resources->dw_dmmu_base + 0x10);
 
 		dev_context->dw_brd_state = BRD_RUNNING;
 	} else if (dev_context->dw_brd_state == BRD_RETENTION) {
diff --git a/drivers/staging/tidspbridge/core/ue_deh.c b/drivers/staging/tidspbridge/core/ue_deh.c
index e24ea0c7391..3430418190d 100644
--- a/drivers/staging/tidspbridge/core/ue_deh.c
+++ b/drivers/staging/tidspbridge/core/ue_deh.c
@@ -31,6 +31,57 @@
 #include <dspbridge/drv.h>
 #include <dspbridge/wdt.h>
 
+static u32 fault_addr;
+
+static void mmu_fault_dpc(unsigned long data)
+{
+	struct deh_mgr *deh = (void *)data;
+
+	if (!deh)
+		return;
+
+	bridge_deh_notify(deh, DSP_MMUFAULT, 0);
+}
+
+static irqreturn_t mmu_fault_isr(int irq, void *data)
+{
+	struct deh_mgr *deh = data;
+	struct cfg_hostres *resources;
+	u32 event;
+
+	if (!deh)
+		return IRQ_HANDLED;
+
+	resources = deh->hbridge_context->resources;
+	if (!resources) {
+		dev_dbg(bridge, "%s: Failed to get Host Resources\n",
+				__func__);
+		return IRQ_HANDLED;
+	}
+
+	hw_mmu_event_status(resources->dw_dmmu_base, &event);
+	if (event == HW_MMU_TRANSLATION_FAULT) {
+		hw_mmu_fault_addr_read(resources->dw_dmmu_base, &fault_addr);
+		dev_dbg(bridge, "%s: event=0x%x, fault_addr=0x%x\n", __func__,
+				event, fault_addr);
+		/*
+		 * Schedule a DPC directly. In the future, it may be
+		 * necessary to check if DSP MMU fault is intended for
+		 * Bridge.
+		 */
+		tasklet_schedule(&deh->dpc_tasklet);
+
+		/* Disable the MMU events, else once we clear it will
+		 * start to raise INTs again */
+		hw_mmu_event_disable(resources->dw_dmmu_base,
+				HW_MMU_TRANSLATION_FAULT);
+	} else {
+		hw_mmu_event_disable(resources->dw_dmmu_base,
+				HW_MMU_ALL_INTERRUPTS);
+	}
+	return IRQ_HANDLED;
+}
+
 int bridge_deh_create(struct deh_mgr **ret_deh,
 		struct dev_object *hdev_obj)
 {
@@ -58,9 +109,18 @@ int bridge_deh_create(struct deh_mgr **ret_deh,
 	}
 	ntfy_init(deh->ntfy_obj);
 
+	/* Create a MMUfault DPC */
+	tasklet_init(&deh->dpc_tasklet, mmu_fault_dpc, (u32) deh);
+
 	/* Fill in context structure */
 	deh->hbridge_context = hbridge_context;
 
+	/* Install ISR function for DSP MMU fault */
+	status = request_irq(INT_DSP_MMU_IRQ, mmu_fault_isr, 0,
+			"DspBridge\tiommu fault", deh);
+	if (status < 0)
+		goto err;
+
 	*ret_deh = deh;
 	return 0;
 
@@ -80,6 +140,11 @@ int bridge_deh_destroy(struct deh_mgr *deh)
 		ntfy_delete(deh->ntfy_obj);
 		kfree(deh->ntfy_obj);
 	}
+	/* Disable DSP MMU fault */
+	free_irq(INT_DSP_MMU_IRQ, deh);
+
+	/* Free DPC object */
+	tasklet_kill(&deh->dpc_tasklet);
 
 	/* Deallocate the DEH manager object */
 	kfree(deh);
@@ -101,6 +166,48 @@ int bridge_deh_register_notify(struct deh_mgr *deh, u32 event_mask,
 		return ntfy_unregister(deh->ntfy_obj, hnotification);
 }
 
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+static void mmu_fault_print_stack(struct bridge_dev_context *dev_context)
+{
+	struct cfg_hostres *resources;
+	struct hw_mmu_map_attrs_t map_attrs = {
+		.endianism = HW_LITTLE_ENDIAN,
+		.element_size = HW_ELEM_SIZE16BIT,
+		.mixed_size = HW_MMU_CPUES,
+	};
+	void *dummy_va_addr;
+
+	resources = dev_context->resources;
+	dummy_va_addr = (void*)__get_free_page(GFP_ATOMIC);
+
+	/*
+	 * Before acking the MMU fault, let's make sure MMU can only
+	 * access entry #0. Then add a new entry so that the DSP OS
+	 * can continue in order to dump the stack.
+	 */
+	hw_mmu_twl_disable(resources->dw_dmmu_base);
+	hw_mmu_tlb_flush_all(resources->dw_dmmu_base);
+
+	hw_mmu_tlb_add(resources->dw_dmmu_base,
+			virt_to_phys(dummy_va_addr), fault_addr,
+			HW_PAGE_SIZE4KB, 1,
+			&map_attrs, HW_SET, HW_SET);
+
+	dsp_clk_enable(DSP_CLK_GPT8);
+
+	dsp_gpt_wait_overflow(DSP_CLK_GPT8, 0xfffffffe);
+
+	/* Clear MMU interrupt */
+	hw_mmu_event_ack(resources->dw_dmmu_base,
+			HW_MMU_TRANSLATION_FAULT);
+	dump_dsp_stack(dev_context);
+	dsp_clk_disable(DSP_CLK_GPT8);
+
+	hw_mmu_disable(resources->dw_dmmu_base);
+	free_page((unsigned long)dummy_va_addr);
+}
+#endif
+
 static inline const char *event_to_string(int event)
 {
 	switch (event) {
@@ -133,7 +240,13 @@ void bridge_deh_notify(struct deh_mgr *deh, int event, int info)
 #endif
 		break;
 	case DSP_MMUFAULT:
-		dev_err(bridge, "%s: %s, addr=0x%x", __func__, str, info);
+		dev_err(bridge, "%s: %s, addr=0x%x", __func__,
+				str, fault_addr);
+#ifdef CONFIG_TIDSPBRIDGE_BACKTRACE
+		print_dsp_trace_buffer(dev_context);
+		dump_dl_modules(dev_context);
+		mmu_fault_print_stack(dev_context);
+#endif
 		break;
 	default:
 		dev_err(bridge, "%s: %s", __func__, str);
diff --git a/drivers/staging/tidspbridge/hw/EasiGlobal.h b/drivers/staging/tidspbridge/hw/EasiGlobal.h
new file mode 100644
index 00000000000..e48d7f67c60
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/EasiGlobal.h
@@ -0,0 +1,41 @@
+/*
+ * EasiGlobal.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _EASIGLOBAL_H
+#define _EASIGLOBAL_H
+#include <linux/types.h>
+
+/*
+ * DEFINE:        READ_ONLY, WRITE_ONLY &  READ_WRITE
+ *
+ * DESCRIPTION: Defines used to describe register types for EASI-checker tests.
+ */
+
+#define READ_ONLY    1
+#define WRITE_ONLY   2
+#define READ_WRITE   3
+
+/*
+ * MACRO:        _DEBUG_LEVEL1_EASI
+ *
+ * DESCRIPTION:  A MACRO which can be used to indicate that a particular beach
+ *               register access function was called.
+ *
+ * NOTE:         We currently dont use this functionality.
+ */
+#define _DEBUG_LEVEL1_EASI(easi_num)     ((void)0)
+
+#endif /* _EASIGLOBAL_H */
diff --git a/drivers/staging/tidspbridge/hw/MMUAccInt.h b/drivers/staging/tidspbridge/hw/MMUAccInt.h
new file mode 100644
index 00000000000..1cefca321d7
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/MMUAccInt.h
@@ -0,0 +1,76 @@
+/*
+ * MMUAccInt.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _MMU_ACC_INT_H
+#define _MMU_ACC_INT_H
+
+/* Mappings of level 1 EASI function numbers to function names */
+
+#define EASIL1_MMUMMU_SYSCONFIG_READ_REGISTER32 (MMU_BASE_EASIL1 + 3)
+#define EASIL1_MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32  (MMU_BASE_EASIL1 + 17)
+#define EASIL1_MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32    (MMU_BASE_EASIL1 + 39)
+#define EASIL1_MMUMMU_IRQSTATUS_WRITE_REGISTER32   (MMU_BASE_EASIL1 + 51)
+#define EASIL1_MMUMMU_IRQENABLE_READ_REGISTER32 (MMU_BASE_EASIL1 + 102)
+#define EASIL1_MMUMMU_IRQENABLE_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 103)
+#define EASIL1_MMUMMU_WALKING_STTWL_RUNNING_READ32 (MMU_BASE_EASIL1 + 156)
+#define EASIL1_MMUMMU_CNTLTWL_ENABLE_READ32 (MMU_BASE_EASIL1 + 174)
+#define EASIL1_MMUMMU_CNTLTWL_ENABLE_WRITE32   (MMU_BASE_EASIL1 + 180)
+#define EASIL1_MMUMMU_CNTLMMU_ENABLE_WRITE32     (MMU_BASE_EASIL1 + 190)
+#define EASIL1_MMUMMU_FAULT_AD_READ_REGISTER32   (MMU_BASE_EASIL1 + 194)
+#define EASIL1_MMUMMU_TTB_WRITE_REGISTER32  (MMU_BASE_EASIL1 + 198)
+#define EASIL1_MMUMMU_LOCK_READ_REGISTER32   (MMU_BASE_EASIL1 + 203)
+#define EASIL1_MMUMMU_LOCK_WRITE_REGISTER32  (MMU_BASE_EASIL1 + 204)
+#define EASIL1_MMUMMU_LOCK_BASE_VALUE_READ32  (MMU_BASE_EASIL1 + 205)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_READ32 (MMU_BASE_EASIL1 + 209)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_WRITE32 (MMU_BASE_EASIL1 + 211)
+#define EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_SET32  (MMU_BASE_EASIL1 + 212)
+#define EASIL1_MMUMMU_LD_TLB_READ_REGISTER32    (MMU_BASE_EASIL1 + 213)
+#define EASIL1_MMUMMU_LD_TLB_WRITE_REGISTER32   (MMU_BASE_EASIL1 + 214)
+#define EASIL1_MMUMMU_CAM_WRITE_REGISTER32   (MMU_BASE_EASIL1 + 226)
+#define EASIL1_MMUMMU_RAM_WRITE_REGISTER32 (MMU_BASE_EASIL1 + 268)
+#define EASIL1_MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32  (MMU_BASE_EASIL1 + 322)
+
+/* Register offset address definitions */
+#define MMU_MMU_SYSCONFIG_OFFSET   0x10
+#define MMU_MMU_IRQSTATUS_OFFSET  0x18
+#define MMU_MMU_IRQENABLE_OFFSET    0x1c
+#define MMU_MMU_WALKING_ST_OFFSET 0x40
+#define MMU_MMU_CNTL_OFFSET   0x44
+#define MMU_MMU_FAULT_AD_OFFSET  0x48
+#define MMU_MMU_TTB_OFFSET  0x4c
+#define MMU_MMU_LOCK_OFFSET   0x50
+#define MMU_MMU_LD_TLB_OFFSET  0x54
+#define MMU_MMU_CAM_OFFSET   0x58
+#define MMU_MMU_RAM_OFFSET   0x5c
+#define MMU_MMU_GFLUSH_OFFSET  0x60
+#define MMU_MMU_FLUSH_ENTRY_OFFSET  0x64
+/* Bitfield mask and offset declarations */
+#define MMU_MMU_SYSCONFIG_IDLE_MODE_MASK  0x18
+#define MMU_MMU_SYSCONFIG_IDLE_MODE_OFFSET  3
+#define MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK  0x1
+#define MMU_MMU_SYSCONFIG_AUTO_IDLE_OFFSET   0
+#define MMU_MMU_WALKING_ST_TWL_RUNNING_MASK 0x1
+#define MMU_MMU_WALKING_ST_TWL_RUNNING_OFFSET  0
+#define MMU_MMU_CNTL_TWL_ENABLE_MASK 0x4
+#define MMU_MMU_CNTL_TWL_ENABLE_OFFSET 2
+#define MMU_MMU_CNTL_MMU_ENABLE_MASK    0x2
+#define MMU_MMU_CNTL_MMU_ENABLE_OFFSET   1
+#define MMU_MMU_LOCK_BASE_VALUE_MASK 0xfc00
+#define MMU_MMU_LOCK_BASE_VALUE_OFFSET   10
+#define MMU_MMU_LOCK_CURRENT_VICTIM_MASK   0x3f0
+#define MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET    4
+
+#endif /* _MMU_ACC_INT_H */
diff --git a/drivers/staging/tidspbridge/hw/MMURegAcM.h b/drivers/staging/tidspbridge/hw/MMURegAcM.h
new file mode 100644
index 00000000000..ab1a16da731
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/MMURegAcM.h
@@ -0,0 +1,225 @@
+/*
+ * MMURegAcM.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _MMU_REG_ACM_H
+#define _MMU_REG_ACM_H
+
+#include <linux/io.h>
+#include <EasiGlobal.h>
+
+#include "MMUAccInt.h"
+
+#if defined(USE_LEVEL_1_MACROS)
+
+#define MMUMMU_SYSCONFIG_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_SYSCONFIG_OFFSET))
+
+#define MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_SYSCONFIG_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_IDLE_MODE_WRITE32);\
+    data &= ~(MMU_MMU_SYSCONFIG_IDLE_MODE_MASK);\
+    new_value <<= MMU_MMU_SYSCONFIG_IDLE_MODE_OFFSET;\
+    new_value &= MMU_MMU_SYSCONFIG_IDLE_MODE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_SYSCONFIG_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_SYSCONFIG_AUTO_IDLE_WRITE32);\
+    data &= ~(MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK);\
+    new_value <<= MMU_MMU_SYSCONFIG_AUTO_IDLE_OFFSET;\
+    new_value &= MMU_MMU_SYSCONFIG_AUTO_IDLE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_IRQSTATUS_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(easil1_mmummu_irqstatus_read_register32),\
+      __raw_readl((base_address)+MMU_MMU_IRQSTATUS_OFFSET))
+
+#define MMUMMU_IRQSTATUS_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_IRQSTATUS_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQSTATUS_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_IRQENABLE_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQENABLE_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_IRQENABLE_OFFSET))
+
+#define MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_IRQENABLE_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_IRQENABLE_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_WALKING_STTWL_RUNNING_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_WALKING_STTWL_RUNNING_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_WALKING_ST_OFFSET))))\
+      & MMU_MMU_WALKING_ST_TWL_RUNNING_MASK) >>\
+      MMU_MMU_WALKING_ST_TWL_RUNNING_OFFSET))
+
+#define MMUMMU_CNTLTWL_ENABLE_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLTWL_ENABLE_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_CNTL_OFFSET)))) &\
+      MMU_MMU_CNTL_TWL_ENABLE_MASK) >>\
+      MMU_MMU_CNTL_TWL_ENABLE_OFFSET))
+
+#define MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_CNTL_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLTWL_ENABLE_WRITE32);\
+    data &= ~(MMU_MMU_CNTL_TWL_ENABLE_MASK);\
+    new_value <<= MMU_MMU_CNTL_TWL_ENABLE_OFFSET;\
+    new_value &= MMU_MMU_CNTL_TWL_ENABLE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_CNTL_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CNTLMMU_ENABLE_WRITE32);\
+    data &= ~(MMU_MMU_CNTL_MMU_ENABLE_MASK);\
+    new_value <<= MMU_MMU_CNTL_MMU_ENABLE_OFFSET;\
+    new_value &= MMU_MMU_CNTL_MMU_ENABLE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_FAULT_AD_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_FAULT_AD_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_FAULT_AD_OFFSET))
+
+#define MMUMMU_TTB_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_TTB_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_TTB_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_LOCK_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_LOCK_OFFSET))
+
+#define MMUMMU_LOCK_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LOCK_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_LOCK_BASE_VALUE_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_BASE_VALUE_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_LOCK_OFFSET)))) &\
+      MMU_MMU_LOCK_BASE_VALUE_MASK) >>\
+      MMU_MMU_LOCK_BASE_VALUE_OFFSET))
+
+#define MMUMMU_LOCK_BASE_VALUE_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LOCK_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(easil1_mmummu_lock_base_value_write32);\
+    data &= ~(MMU_MMU_LOCK_BASE_VALUE_MASK);\
+    new_value <<= MMU_MMU_LOCK_BASE_VALUE_OFFSET;\
+    new_value &= MMU_MMU_LOCK_BASE_VALUE_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_READ32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_READ32),\
+      (((__raw_readl(((base_address)+(MMU_MMU_LOCK_OFFSET)))) &\
+      MMU_MMU_LOCK_CURRENT_VICTIM_MASK) >>\
+      MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET))
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LOCK_OFFSET;\
+    register u32 data = __raw_readl((base_address)+offset);\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_WRITE32);\
+    data &= ~(MMU_MMU_LOCK_CURRENT_VICTIM_MASK);\
+    new_value <<= MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET;\
+    new_value &= MMU_MMU_LOCK_CURRENT_VICTIM_MASK;\
+    new_value |= data;\
+    __raw_writel(new_value, base_address+offset);\
+}
+
+#define MMUMMU_LOCK_CURRENT_VICTIM_SET32(var, value)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LOCK_CURRENT_VICTIM_SET32),\
+      (((var) & ~(MMU_MMU_LOCK_CURRENT_VICTIM_MASK)) |\
+      (((value) << MMU_MMU_LOCK_CURRENT_VICTIM_OFFSET) &\
+      MMU_MMU_LOCK_CURRENT_VICTIM_MASK)))
+
+#define MMUMMU_LD_TLB_READ_REGISTER32(base_address)\
+    (_DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LD_TLB_READ_REGISTER32),\
+      __raw_readl((base_address)+MMU_MMU_LD_TLB_OFFSET))
+
+#define MMUMMU_LD_TLB_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_LD_TLB_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_LD_TLB_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_CAM_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_CAM_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_CAM_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_RAM_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_RAM_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_RAM_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#define MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, value)\
+{\
+    const u32 offset = MMU_MMU_FLUSH_ENTRY_OFFSET;\
+    register u32 new_value = (value);\
+    _DEBUG_LEVEL1_EASI(EASIL1_MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32);\
+    __raw_writel(new_value, (base_address)+offset);\
+}
+
+#endif /* USE_LEVEL_1_MACROS */
+
+#endif /* _MMU_REG_ACM_H */
diff --git a/drivers/staging/tidspbridge/hw/hw_defs.h b/drivers/staging/tidspbridge/hw/hw_defs.h
new file mode 100644
index 00000000000..d5266d4c163
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/hw_defs.h
@@ -0,0 +1,58 @@
+/*
+ * hw_defs.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * Global HW definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _HW_DEFS_H
+#define _HW_DEFS_H
+
+/* Page size */
+#define HW_PAGE_SIZE4KB   0x1000
+#define HW_PAGE_SIZE64KB  0x10000
+#define HW_PAGE_SIZE1MB   0x100000
+#define HW_PAGE_SIZE16MB  0x1000000
+
+/* hw_status:  return type for HW API */
+typedef long hw_status;
+
+/*  Macro used to set and clear any bit */
+#define HW_CLEAR	0
+#define HW_SET		1
+
+/* hw_endianism_t:  Enumerated Type used to specify the endianism
+ *		Do NOT change these values. They are used as bit fields. */
+enum hw_endianism_t {
+	HW_LITTLE_ENDIAN,
+	HW_BIG_ENDIAN
+};
+
+/* hw_element_size_t:  Enumerated Type used to specify the element size
+ *		Do NOT change these values. They are used as bit fields. */
+enum hw_element_size_t {
+	HW_ELEM_SIZE8BIT,
+	HW_ELEM_SIZE16BIT,
+	HW_ELEM_SIZE32BIT,
+	HW_ELEM_SIZE64BIT
+};
+
+/* hw_idle_mode_t:  Enumerated Type used to specify Idle modes */
+enum hw_idle_mode_t {
+	HW_FORCE_IDLE,
+	HW_NO_IDLE,
+	HW_SMART_IDLE
+};
+
+#endif /* _HW_DEFS_H */
diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.c b/drivers/staging/tidspbridge/hw/hw_mmu.c
new file mode 100644
index 00000000000..014f5d5293a
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/hw_mmu.c
@@ -0,0 +1,562 @@
+/*
+ * hw_mmu.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * API definitions to setup MMU TLB and PTE
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include <linux/io.h>
+#include "MMURegAcM.h"
+#include <hw_defs.h>
+#include <hw_mmu.h>
+#include <linux/types.h>
+#include <linux/err.h>
+
+#define MMU_BASE_VAL_MASK	0xFC00
+#define MMU_PAGE_MAX	     3
+#define MMU_ELEMENTSIZE_MAX      3
+#define MMU_ADDR_MASK	    0xFFFFF000
+#define MMU_TTB_MASK	     0xFFFFC000
+#define MMU_SECTION_ADDR_MASK    0xFFF00000
+#define MMU_SSECTION_ADDR_MASK   0xFF000000
+#define MMU_PAGE_TABLE_MASK      0xFFFFFC00
+#define MMU_LARGE_PAGE_MASK      0xFFFF0000
+#define MMU_SMALL_PAGE_MASK      0xFFFFF000
+
+#define MMU_LOAD_TLB	0x00000001
+#define MMU_GFLUSH	0x60
+
+/*
+ * hw_mmu_page_size_t: Enumerated Type used to specify the MMU Page Size(SLSS)
+ */
+enum hw_mmu_page_size_t {
+	HW_MMU_SECTION,
+	HW_MMU_LARGE_PAGE,
+	HW_MMU_SMALL_PAGE,
+	HW_MMU_SUPERSECTION
+};
+
+/*
+ * FUNCTION	      : mmu_flush_entry
+ *
+ * INPUTS:
+ *
+ *       Identifier      : base_address
+ *       Type		: const u32
+ *       Description     : Base Address of instance of MMU module
+ *
+ * RETURNS:
+ *
+ *       Type		: hw_status
+ *       Description     : 0		 -- No errors occured
+ *			 RET_BAD_NULL_PARAM     -- A Pointer
+ *						Paramater was set to NULL
+ *
+ * PURPOSE:	      : Flush the TLB entry pointed by the
+ *			lock counter register
+ *			even if this entry is set protected
+ *
+ * METHOD:	       : Check the Input parameter and Flush a
+ *			 single entry in the TLB.
+ */
+static hw_status mmu_flush_entry(const void __iomem *base_address);
+
+/*
+ * FUNCTION	      : mmu_set_cam_entry
+ *
+ * INPUTS:
+ *
+ *       Identifier      : base_address
+ *       TypE		: const u32
+ *       Description     : Base Address of instance of MMU module
+ *
+ *       Identifier      : page_sz
+ *       TypE		: const u32
+ *       Description     : It indicates the page size
+ *
+ *       Identifier      : preserved_bit
+ *       Type		: const u32
+ *       Description     : It indicates the TLB entry is preserved entry
+ *							or not
+ *
+ *       Identifier      : valid_bit
+ *       Type		: const u32
+ *       Description     : It indicates the TLB entry is valid entry or not
+ *
+ *
+ *       Identifier      : virtual_addr_tag
+ *       Type	    	: const u32
+ *       Description     : virtual Address
+ *
+ * RETURNS:
+ *
+ *       Type	    	: hw_status
+ *       Description     : 0		 -- No errors occured
+ *			 RET_BAD_NULL_PARAM     -- A Pointer Paramater
+ *						   was set to NULL
+ *			 RET_PARAM_OUT_OF_RANGE -- Input Parameter out
+ *						   of Range
+ *
+ * PURPOSE:	      	: Set MMU_CAM reg
+ *
+ * METHOD:	       	: Check the Input parameters and set the CAM entry.
+ */
+static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+				   const u32 page_sz,
+				   const u32 preserved_bit,
+				   const u32 valid_bit,
+				   const u32 virtual_addr_tag);
+
+/*
+ * FUNCTION	      : mmu_set_ram_entry
+ *
+ * INPUTS:
+ *
+ *       Identifier      : base_address
+ *       Type	    	: const u32
+ *       Description     : Base Address of instance of MMU module
+ *
+ *       Identifier      : physical_addr
+ *       Type	    	: const u32
+ *       Description     : Physical Address to which the corresponding
+ *			 virtual   Address shouldpoint
+ *
+ *       Identifier      : endianism
+ *       Type	    	: hw_endianism_t
+ *       Description     : endianism for the given page
+ *
+ *       Identifier      : element_size
+ *       Type	    	: hw_element_size_t
+ *       Description     : The element size ( 8,16, 32 or 64 bit)
+ *
+ *       Identifier      : mixed_size
+ *       Type	    	: hw_mmu_mixed_size_t
+ *       Description     : Element Size to follow CPU or TLB
+ *
+ * RETURNS:
+ *
+ *       Type	    	: hw_status
+ *       Description     : 0		 -- No errors occured
+ *			 RET_BAD_NULL_PARAM     -- A Pointer Paramater
+ *							was set to NULL
+ *			 RET_PARAM_OUT_OF_RANGE -- Input Parameter
+ *							out of Range
+ *
+ * PURPOSE:	      : Set MMU_CAM reg
+ *
+ * METHOD:	       : Check the Input parameters and set the RAM entry.
+ */
+static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+				   const u32 physical_addr,
+				   enum hw_endianism_t endianism,
+				   enum hw_element_size_t element_size,
+				   enum hw_mmu_mixed_size_t mixed_size);
+
+/* HW FUNCTIONS */
+
+hw_status hw_mmu_enable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, HW_SET);
+
+	return status;
+}
+
+hw_status hw_mmu_disable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLMMU_ENABLE_WRITE32(base_address, HW_CLEAR);
+
+	return status;
+}
+
+hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+				u32 num_locked_entries)
+{
+	hw_status status = 0;
+
+	MMUMMU_LOCK_BASE_VALUE_WRITE32(base_address, num_locked_entries);
+
+	return status;
+}
+
+hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+				u32 victim_entry_num)
+{
+	hw_status status = 0;
+
+	MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, victim_entry_num);
+
+	return status;
+}
+
+hw_status hw_mmu_event_ack(const void __iomem *base_address, u32 irq_mask)
+{
+	hw_status status = 0;
+
+	MMUMMU_IRQSTATUS_WRITE_REGISTER32(base_address, irq_mask);
+
+	return status;
+}
+
+hw_status hw_mmu_event_disable(const void __iomem *base_address, u32 irq_mask)
+{
+	hw_status status = 0;
+	u32 irq_reg;
+
+	irq_reg = MMUMMU_IRQENABLE_READ_REGISTER32(base_address);
+
+	MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, irq_reg & ~irq_mask);
+
+	return status;
+}
+
+hw_status hw_mmu_event_enable(const void __iomem *base_address, u32 irq_mask)
+{
+	hw_status status = 0;
+	u32 irq_reg;
+
+	irq_reg = MMUMMU_IRQENABLE_READ_REGISTER32(base_address);
+
+	MMUMMU_IRQENABLE_WRITE_REGISTER32(base_address, irq_reg | irq_mask);
+
+	return status;
+}
+
+hw_status hw_mmu_event_status(const void __iomem *base_address, u32 *irq_mask)
+{
+	hw_status status = 0;
+
+	*irq_mask = MMUMMU_IRQSTATUS_READ_REGISTER32(base_address);
+
+	return status;
+}
+
+hw_status hw_mmu_fault_addr_read(const void __iomem *base_address, u32 *addr)
+{
+	hw_status status = 0;
+
+	/* read values from register */
+	*addr = MMUMMU_FAULT_AD_READ_REGISTER32(base_address);
+
+	return status;
+}
+
+hw_status hw_mmu_ttb_set(const void __iomem *base_address, u32 ttb_phys_addr)
+{
+	hw_status status = 0;
+	u32 load_ttb;
+
+	load_ttb = ttb_phys_addr & ~0x7FUL;
+	/* write values to register */
+	MMUMMU_TTB_WRITE_REGISTER32(base_address, load_ttb);
+
+	return status;
+}
+
+hw_status hw_mmu_twl_enable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, HW_SET);
+
+	return status;
+}
+
+hw_status hw_mmu_twl_disable(const void __iomem *base_address)
+{
+	hw_status status = 0;
+
+	MMUMMU_CNTLTWL_ENABLE_WRITE32(base_address, HW_CLEAR);
+
+	return status;
+}
+
+hw_status hw_mmu_tlb_flush(const void __iomem *base_address, u32 virtual_addr,
+			   u32 page_sz)
+{
+	hw_status status = 0;
+	u32 virtual_addr_tag;
+	enum hw_mmu_page_size_t pg_size_bits;
+
+	switch (page_sz) {
+	case HW_PAGE_SIZE4KB:
+		pg_size_bits = HW_MMU_SMALL_PAGE;
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		pg_size_bits = HW_MMU_LARGE_PAGE;
+		break;
+
+	case HW_PAGE_SIZE1MB:
+		pg_size_bits = HW_MMU_SECTION;
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		pg_size_bits = HW_MMU_SUPERSECTION;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/* Generate the 20-bit tag from virtual address */
+	virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
+
+	mmu_set_cam_entry(base_address, pg_size_bits, 0, 0, virtual_addr_tag);
+
+	mmu_flush_entry(base_address);
+
+	return status;
+}
+
+hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+			 u32 physical_addr,
+			 u32 virtual_addr,
+			 u32 page_sz,
+			 u32 entry_num,
+			 struct hw_mmu_map_attrs_t *map_attrs,
+			 s8 preserved_bit, s8 valid_bit)
+{
+	hw_status status = 0;
+	u32 lock_reg;
+	u32 virtual_addr_tag;
+	enum hw_mmu_page_size_t mmu_pg_size;
+
+	/*Check the input Parameters */
+	switch (page_sz) {
+	case HW_PAGE_SIZE4KB:
+		mmu_pg_size = HW_MMU_SMALL_PAGE;
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		mmu_pg_size = HW_MMU_LARGE_PAGE;
+		break;
+
+	case HW_PAGE_SIZE1MB:
+		mmu_pg_size = HW_MMU_SECTION;
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		mmu_pg_size = HW_MMU_SUPERSECTION;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	lock_reg = MMUMMU_LOCK_READ_REGISTER32(base_address);
+
+	/* Generate the 20-bit tag from virtual address */
+	virtual_addr_tag = ((virtual_addr & MMU_ADDR_MASK) >> 12);
+
+	/* Write the fields in the CAM Entry Register */
+	mmu_set_cam_entry(base_address, mmu_pg_size, preserved_bit, valid_bit,
+			  virtual_addr_tag);
+
+	/* Write the different fields of the RAM Entry Register */
+	/* endianism of the page,Element Size of the page (8, 16, 32, 64 bit) */
+	mmu_set_ram_entry(base_address, physical_addr, map_attrs->endianism,
+			  map_attrs->element_size, map_attrs->mixed_size);
+
+	/* Update the MMU Lock Register */
+	/* currentVictim between lockedBaseValue and (MMU_Entries_Number - 1) */
+	MMUMMU_LOCK_CURRENT_VICTIM_WRITE32(base_address, entry_num);
+
+	/* Enable loading of an entry in TLB by writing 1
+	   into LD_TLB_REG register */
+	MMUMMU_LD_TLB_WRITE_REGISTER32(base_address, MMU_LOAD_TLB);
+
+	MMUMMU_LOCK_WRITE_REGISTER32(base_address, lock_reg);
+
+	return status;
+}
+
+hw_status hw_mmu_pte_set(const u32 pg_tbl_va,
+			 u32 physical_addr,
+			 u32 virtual_addr,
+			 u32 page_sz, struct hw_mmu_map_attrs_t *map_attrs)
+{
+	hw_status status = 0;
+	u32 pte_addr, pte_val;
+	s32 num_entries = 1;
+
+	switch (page_sz) {
+	case HW_PAGE_SIZE4KB:
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SMALL_PAGE_MASK);
+		pte_val =
+		    ((physical_addr & MMU_SMALL_PAGE_MASK) |
+		     (map_attrs->endianism << 9) | (map_attrs->
+						    element_size << 4) |
+		     (map_attrs->mixed_size << 11) | 2);
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_LARGE_PAGE_MASK);
+		pte_val =
+		    ((physical_addr & MMU_LARGE_PAGE_MASK) |
+		     (map_attrs->endianism << 9) | (map_attrs->
+						    element_size << 4) |
+		     (map_attrs->mixed_size << 11) | 1);
+		break;
+
+	case HW_PAGE_SIZE1MB:
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SECTION_ADDR_MASK);
+		pte_val =
+		    ((((physical_addr & MMU_SECTION_ADDR_MASK) |
+		       (map_attrs->endianism << 15) | (map_attrs->
+						       element_size << 10) |
+		       (map_attrs->mixed_size << 17)) & ~0x40000) | 0x2);
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SSECTION_ADDR_MASK);
+		pte_val =
+		    (((physical_addr & MMU_SSECTION_ADDR_MASK) |
+		      (map_attrs->endianism << 15) | (map_attrs->
+						      element_size << 10) |
+		      (map_attrs->mixed_size << 17)
+		     ) | 0x40000 | 0x2);
+		break;
+
+	case HW_MMU_COARSE_PAGE_SIZE:
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SECTION_ADDR_MASK);
+		pte_val = (physical_addr & MMU_PAGE_TABLE_MASK) | 1;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	while (--num_entries >= 0)
+		((u32 *) pte_addr)[num_entries] = pte_val;
+
+	return status;
+}
+
+hw_status hw_mmu_pte_clear(const u32 pg_tbl_va, u32 virtual_addr, u32 page_size)
+{
+	hw_status status = 0;
+	u32 pte_addr;
+	s32 num_entries = 1;
+
+	switch (page_size) {
+	case HW_PAGE_SIZE4KB:
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SMALL_PAGE_MASK);
+		break;
+
+	case HW_PAGE_SIZE64KB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l2(pg_tbl_va,
+					      virtual_addr &
+					      MMU_LARGE_PAGE_MASK);
+		break;
+
+	case HW_PAGE_SIZE1MB:
+	case HW_MMU_COARSE_PAGE_SIZE:
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SECTION_ADDR_MASK);
+		break;
+
+	case HW_PAGE_SIZE16MB:
+		num_entries = 16;
+		pte_addr = hw_mmu_pte_addr_l1(pg_tbl_va,
+					      virtual_addr &
+					      MMU_SSECTION_ADDR_MASK);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	while (--num_entries >= 0)
+		((u32 *) pte_addr)[num_entries] = 0;
+
+	return status;
+}
+
+/* mmu_flush_entry */
+static hw_status mmu_flush_entry(const void __iomem *base_address)
+{
+	hw_status status = 0;
+	u32 flush_entry_data = 0x1;
+
+	/* write values to register */
+	MMUMMU_FLUSH_ENTRY_WRITE_REGISTER32(base_address, flush_entry_data);
+
+	return status;
+}
+
+/* mmu_set_cam_entry */
+static hw_status mmu_set_cam_entry(const void __iomem *base_address,
+				   const u32 page_sz,
+				   const u32 preserved_bit,
+				   const u32 valid_bit,
+				   const u32 virtual_addr_tag)
+{
+	hw_status status = 0;
+	u32 mmu_cam_reg;
+
+	mmu_cam_reg = (virtual_addr_tag << 12);
+	mmu_cam_reg = (mmu_cam_reg) | (page_sz) | (valid_bit << 2) |
+	    (preserved_bit << 3);
+
+	/* write values to register */
+	MMUMMU_CAM_WRITE_REGISTER32(base_address, mmu_cam_reg);
+
+	return status;
+}
+
+/* mmu_set_ram_entry */
+static hw_status mmu_set_ram_entry(const void __iomem *base_address,
+				   const u32 physical_addr,
+				   enum hw_endianism_t endianism,
+				   enum hw_element_size_t element_size,
+				   enum hw_mmu_mixed_size_t mixed_size)
+{
+	hw_status status = 0;
+	u32 mmu_ram_reg;
+
+	mmu_ram_reg = (physical_addr & MMU_ADDR_MASK);
+	mmu_ram_reg = (mmu_ram_reg) | ((endianism << 9) | (element_size << 7) |
+				       (mixed_size << 6));
+
+	/* write values to register */
+	MMUMMU_RAM_WRITE_REGISTER32(base_address, mmu_ram_reg);
+
+	return status;
+
+}
+
+void hw_mmu_tlb_flush_all(const void __iomem *base)
+{
+	__raw_writeb(1, base + MMU_GFLUSH);
+}
diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.h b/drivers/staging/tidspbridge/hw/hw_mmu.h
new file mode 100644
index 00000000000..1458a2c6027
--- /dev/null
+++ b/drivers/staging/tidspbridge/hw/hw_mmu.h
@@ -0,0 +1,163 @@
+/*
+ * hw_mmu.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * MMU types and API declarations
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef _HW_MMU_H
+#define _HW_MMU_H
+
+#include <linux/types.h>
+
+/* Bitmasks for interrupt sources */
+#define HW_MMU_TRANSLATION_FAULT   0x2
+#define HW_MMU_ALL_INTERRUPTS      0x1F
+
+#define HW_MMU_COARSE_PAGE_SIZE 0x400
+
+/* hw_mmu_mixed_size_t:  Enumerated Type used to specify whether to follow
+			CPU/TLB Element size */
+enum hw_mmu_mixed_size_t {
+	HW_MMU_TLBES,
+	HW_MMU_CPUES
+};
+
+/* hw_mmu_map_attrs_t:  Struct containing MMU mapping attributes */
+struct hw_mmu_map_attrs_t {
+	enum hw_endianism_t endianism;
+	enum hw_element_size_t element_size;
+	enum hw_mmu_mixed_size_t mixed_size;
+	bool donotlockmpupage;
+};
+
+extern hw_status hw_mmu_enable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_disable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_num_locked_set(const void __iomem *base_address,
+				       u32 num_locked_entries);
+
+extern hw_status hw_mmu_victim_num_set(const void __iomem *base_address,
+				       u32 victim_entry_num);
+
+/* For MMU faults */
+extern hw_status hw_mmu_event_ack(const void __iomem *base_address,
+				  u32 irq_mask);
+
+extern hw_status hw_mmu_event_disable(const void __iomem *base_address,
+				      u32 irq_mask);
+
+extern hw_status hw_mmu_event_enable(const void __iomem *base_address,
+				     u32 irq_mask);
+
+extern hw_status hw_mmu_event_status(const void __iomem *base_address,
+				     u32 *irq_mask);
+
+extern hw_status hw_mmu_fault_addr_read(const void __iomem *base_address,
+					u32 *addr);
+
+/* Set the TT base address */
+extern hw_status hw_mmu_ttb_set(const void __iomem *base_address,
+				u32 ttb_phys_addr);
+
+extern hw_status hw_mmu_twl_enable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_twl_disable(const void __iomem *base_address);
+
+extern hw_status hw_mmu_tlb_flush(const void __iomem *base_address,
+				  u32 virtual_addr, u32 page_sz);
+
+extern hw_status hw_mmu_tlb_add(const void __iomem *base_address,
+				u32 physical_addr,
+				u32 virtual_addr,
+				u32 page_sz,
+				u32 entry_num,
+				struct hw_mmu_map_attrs_t *map_attrs,
+				s8 preserved_bit, s8 valid_bit);
+
+/* For PTEs */
+extern hw_status hw_mmu_pte_set(const u32 pg_tbl_va,
+				u32 physical_addr,
+				u32 virtual_addr,
+				u32 page_sz,
+				struct hw_mmu_map_attrs_t *map_attrs);
+
+extern hw_status hw_mmu_pte_clear(const u32 pg_tbl_va,
+				  u32 virtual_addr, u32 page_size);
+
+void hw_mmu_tlb_flush_all(const void __iomem *base);
+
+static inline u32 hw_mmu_pte_addr_l1(u32 l1_base, u32 va)
+{
+	u32 pte_addr;
+	u32 va31_to20;
+
+	va31_to20 = va >> (20 - 2);	/* Left-shift by 2 here itself */
+	va31_to20 &= 0xFFFFFFFCUL;
+	pte_addr = l1_base + va31_to20;
+
+	return pte_addr;
+}
+
+static inline u32 hw_mmu_pte_addr_l2(u32 l2_base, u32 va)
+{
+	u32 pte_addr;
+
+	pte_addr = (l2_base & 0xFFFFFC00) | ((va >> 10) & 0x3FC);
+
+	return pte_addr;
+}
+
+static inline u32 hw_mmu_pte_coarse_l1(u32 pte_val)
+{
+	u32 pte_coarse;
+
+	pte_coarse = pte_val & 0xFFFFFC00;
+
+	return pte_coarse;
+}
+
+static inline u32 hw_mmu_pte_size_l1(u32 pte_val)
+{
+	u32 pte_size = 0;
+
+	if ((pte_val & 0x3) == 0x1) {
+		/* Points to L2 PT */
+		pte_size = HW_MMU_COARSE_PAGE_SIZE;
+	}
+
+	if ((pte_val & 0x3) == 0x2) {
+		if (pte_val & (1 << 18))
+			pte_size = HW_PAGE_SIZE16MB;
+		else
+			pte_size = HW_PAGE_SIZE1MB;
+	}
+
+	return pte_size;
+}
+
+static inline u32 hw_mmu_pte_size_l2(u32 pte_val)
+{
+	u32 pte_size = 0;
+
+	if (pte_val & 0x2)
+		pte_size = HW_PAGE_SIZE4KB;
+	else if (pte_val & 0x1)
+		pte_size = HW_PAGE_SIZE64KB;
+
+	return pte_size;
+}
+
+#endif /* _HW_MMU_H */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h b/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
index dfb55cca34c..38122dbf877 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/cfgdefs.h
@@ -68,6 +68,7 @@ struct cfg_hostres {
 	void __iomem *dw_per_base;
 	u32 dw_per_pm_base;
 	u32 dw_core_pm_base;
+	void __iomem *dw_dmmu_base;
 	void __iomem *dw_sys_ctrl_base;
 };
 
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dev.h b/drivers/staging/tidspbridge/include/dspbridge/dev.h
index 9bdd48f5742..357458fadd2 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dev.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dev.h
@@ -27,6 +27,7 @@
 #include <dspbridge/nodedefs.h>
 #include <dspbridge/dispdefs.h>
 #include <dspbridge/dspdefs.h>
+#include <dspbridge/dmm.h>
 #include <dspbridge/host_os.h>
 
 /*  ----------------------------------- This */
@@ -233,6 +234,29 @@ extern int dev_get_cmm_mgr(struct dev_object *hdev_obj,
 				  struct cmm_object **mgr);
 
 /*
+ *  ======== dev_get_dmm_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the dynamic memory manager created for this
+ *      device.
+ *  Parameters:
+ *      hdev_obj:     Handle to device object created with
+ *                      dev_create_device().
+ *      *mgr:           Ptr to location to store handle.
+ *  Returns:
+ *      0:        Success.
+ *      -EFAULT:    Invalid hdev_obj.
+ *  Requires:
+ *      mgr != NULL.
+ *      DEV Initialized.
+ *  Ensures:
+ *      0:        *mgr contains a handle to a channel manager object,
+ *                      or NULL.
+ *      else:           *mgr is NULL.
+ */
+extern int dev_get_dmm_mgr(struct dev_object *hdev_obj,
+				  struct dmm_object **mgr);
+
+/*
  *  ======== dev_get_cod_mgr ========
  *  Purpose:
  *      Retrieve the COD manager create for this device.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dmm.h b/drivers/staging/tidspbridge/include/dspbridge/dmm.h
new file mode 100644
index 00000000000..6c58335c5f6
--- /dev/null
+++ b/drivers/staging/tidspbridge/include/dspbridge/dmm.h
@@ -0,0 +1,75 @@
+/*
+ * dmm.h
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The Dynamic Memory Mapping(DMM) module manages the DSP Virtual address
+ * space that can be directly mapped to any MPU buffer or memory region.
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef DMM_
+#define DMM_
+
+#include <dspbridge/dbdefs.h>
+
+struct dmm_object;
+
+/* DMM attributes used in dmm_create() */
+struct dmm_mgrattrs {
+	u32 reserved;
+};
+
+#define DMMPOOLSIZE      0x4000000
+
+/*
+ *  ======== dmm_get_handle ========
+ *  Purpose:
+ *      Return the dynamic memory manager object for this device.
+ *      This is typically called from the client process.
+ */
+
+extern int dmm_get_handle(void *hprocessor,
+				 struct dmm_object **dmm_manager);
+
+extern int dmm_reserve_memory(struct dmm_object *dmm_mgr,
+				     u32 size, u32 *prsv_addr);
+
+extern int dmm_un_reserve_memory(struct dmm_object *dmm_mgr,
+					u32 rsv_addr);
+
+extern int dmm_map_memory(struct dmm_object *dmm_mgr, u32 addr,
+				 u32 size);
+
+extern int dmm_un_map_memory(struct dmm_object *dmm_mgr,
+				    u32 addr, u32 *psize);
+
+extern int dmm_destroy(struct dmm_object *dmm_mgr);
+
+extern int dmm_delete_tables(struct dmm_object *dmm_mgr);
+
+extern int dmm_create(struct dmm_object **dmm_manager,
+			     struct dev_object *hdev_obj,
+			     const struct dmm_mgrattrs *mgr_attrts);
+
+extern bool dmm_init(void);
+
+extern void dmm_exit(void);
+
+extern int dmm_create_tables(struct dmm_object *dmm_mgr,
+				    u32 addr, u32 size);
+
+#ifdef DSP_DMM_DEBUG
+u32 dmm_mem_map_dump(struct dmm_object *dmm_mgr);
+#endif
+
+#endif /* DMM_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/drv.h b/drivers/staging/tidspbridge/include/dspbridge/drv.h
index 75a2c9b5c6f..c1f363ec9af 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/drv.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/drv.h
@@ -108,6 +108,12 @@ struct dmm_map_object {
 	struct bridge_dma_map_info dma_info;
 };
 
+/* Used for DMM reserved memory accounting */
+struct dmm_rsv_object {
+	struct list_head link;
+	u32 dsp_reserved_addr;
+};
+
 /* New structure (member of process context) abstracts DMM resource info */
 struct dspheap_res_object {
 	s32 heap_allocated;	/* DMM status */
@@ -159,6 +165,10 @@ struct process_context {
 	struct list_head dmm_map_list;
 	spinlock_t dmm_map_lock;
 
+	/* DMM reserved memory resources */
+	struct list_head dmm_rsv_list;
+	spinlock_t dmm_rsv_lock;
+
 	/* DSP Heap resources */
 	struct dspheap_res_object *pdspheap_list;
 
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dsp-mmu.h b/drivers/staging/tidspbridge/include/dspbridge/dsp-mmu.h
deleted file mode 100644
index cb38d4cc073..00000000000
--- a/drivers/staging/tidspbridge/include/dspbridge/dsp-mmu.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * dsp-mmu.h
- *
- * DSP-BIOS Bridge driver support functions for TI OMAP processors.
- *
- * DSP iommu.
- *
- * Copyright (C) 2005-2010 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _DSP_MMU_
-#define _DSP_MMU_
-
-#include <plat/iommu.h>
-#include <plat/iovmm.h>
-
-/**
- * dsp_mmu_init() - initialize dsp_mmu module and returns a handle
- *
- * This function initialize dsp mmu module and returns a struct iommu
- * handle to use it for dsp maps.
- *
- */
-struct iommu *dsp_mmu_init(void);
-
-/**
- * dsp_mmu_exit() - destroy dsp mmu module
- * @mmu:	Pointer to iommu handle.
- *
- * This function destroys dsp mmu module.
- *
- */
-void dsp_mmu_exit(struct iommu *mmu);
-
-/**
- * user_to_dsp_map() - maps user to dsp virtual address
- * @mmu:	Pointer to iommu handle.
- * @uva:		Virtual user space address.
- * @da		DSP address
- * @size		Buffer size to map.
- * @usr_pgs	struct page array pointer where the user pages will be stored
- *
- * This function maps a user space buffer into DSP virtual address.
- *
- */
-u32 user_to_dsp_map(struct iommu *mmu, u32 uva, u32 da, u32 size,
-						struct page **usr_pgs);
-
-/**
- * user_to_dsp_unmap() - unmaps DSP virtual buffer.
- * @mmu:	Pointer to iommu handle.
- * @da		DSP address
- *
- * This function unmaps a user space buffer into DSP virtual address.
- *
- */
-int user_to_dsp_unmap(struct iommu *mmu, u32 da);
-
-#endif
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
index 61536347481..0ae7d1646a1 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
@@ -162,6 +162,48 @@ typedef int(*fxn_brd_memwrite) (struct bridge_dev_context
 				       u32 mem_type);
 
 /*
+ *  ======== bridge_brd_mem_map ========
+ *  Purpose:
+ *      Map a MPU memory region to a DSP/IVA memory space
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      ul_mpu_addr:      MPU memory region start address.
+ *      virt_addr:      DSP/IVA memory region u8 address.
+ *      ul_num_bytes:     Number of bytes to map.
+ *      map_attrs:       Mapping attributes (e.g. endianness).
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *  Ensures:
+ */
+typedef int(*fxn_brd_memmap) (struct bridge_dev_context
+				     * dev_ctxt, u32 ul_mpu_addr,
+				     u32 virt_addr, u32 ul_num_bytes,
+				     u32 map_attr,
+				     struct page **mapped_pages);
+
+/*
+ *  ======== bridge_brd_mem_un_map ========
+ *  Purpose:
+ *      UnMap an MPU memory region from DSP/IVA memory space
+ *  Parameters:
+ *      dev_ctxt:    Handle to Bridge driver defined device info.
+ *      virt_addr:      DSP/IVA memory region u8 address.
+ *      ul_num_bytes:     Number of bytes to unmap.
+ *  Returns:
+ *      0:        Success.
+ *      -EPERM:      Other, unspecified error.
+ *  Requires:
+ *      dev_ctxt != NULL;
+ *  Ensures:
+ */
+typedef int(*fxn_brd_memunmap) (struct bridge_dev_context
+				       * dev_ctxt,
+				       u32 virt_addr, u32 ul_num_bytes);
+
+/*
  *  ======== bridge_brd_stop ========
  *  Purpose:
  *      Bring board to the BRD_STOPPED state.
@@ -951,6 +993,8 @@ struct bridge_drv_interface {
 	fxn_brd_setstate pfn_brd_set_state;	/* Sets the Board State */
 	fxn_brd_memcopy pfn_brd_mem_copy;	/* Copies DSP Memory */
 	fxn_brd_memwrite pfn_brd_mem_write;	/* Write DSP Memory w/o halt */
+	fxn_brd_memmap pfn_brd_mem_map;	/* Maps MPU mem to DSP mem */
+	fxn_brd_memunmap pfn_brd_mem_un_map;	/* Unmaps MPU mem to DSP mem */
 	fxn_chnl_create pfn_chnl_create;	/* Create channel manager. */
 	fxn_chnl_destroy pfn_chnl_destroy;	/* Destroy channel manager. */
 	fxn_chnl_open pfn_chnl_open;	/* Create a new channel. */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h b/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h
index bad180108ad..41e0594dff3 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspioctl.h
@@ -19,6 +19,10 @@
 #ifndef DSPIOCTL_
 #define DSPIOCTL_
 
+/* ------------------------------------ Hardware Abstraction Layer */
+#include <hw_defs.h>
+#include <hw_mmu.h>
+
 /*
  * Any IOCTLS at or above this value are reserved for standard Bridge driver
  * interfaces.
@@ -61,6 +65,9 @@ struct bridge_ioctl_extproc {
 	/* GPP virtual address. __va does not work for ioremapped addresses */
 	u32 ul_gpp_va;
 	u32 ul_size;		/* Size of the mapped memory in bytes */
+	enum hw_endianism_t endianism;
+	enum hw_mmu_mixed_size_t mixed_mode;
+	enum hw_element_size_t elem_size;
 };
 
 #endif /* DSPIOCTL_ */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/proc.h b/drivers/staging/tidspbridge/include/dspbridge/proc.h
index 2d12aab6b5b..5e09fd165d9 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/proc.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/proc.h
@@ -551,6 +551,29 @@ extern int proc_map(void *hprocessor,
 			   struct process_context *pr_ctxt);
 
 /*
+ *  ======== proc_reserve_memory ========
+ *  Purpose:
+ *      Reserve a virtually contiguous region of DSP address space.
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      ul_size	  :   Size of the address space to reserve.
+ *      pp_rsv_addr       :   Ptr to DSP side reserved u8 address.
+ *  Returns:
+ *      0	 :   Success.
+ *      -EFAULT     :   Invalid processor handle.
+ *      -EPERM       :   General failure.
+ *      -ENOMEM     :   Cannot reserve chunk of this size.
+ *  Requires:
+ *      pp_rsv_addr is not NULL
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_reserve_memory(void *hprocessor,
+				      u32 ul_size, void **pp_rsv_addr,
+				      struct process_context *pr_ctxt);
+
+/*
  *  ======== proc_un_map ========
  *  Purpose:
  *      Removes a MPU buffer mapping from the DSP address space.
@@ -572,4 +595,27 @@ extern int proc_map(void *hprocessor,
 extern int proc_un_map(void *hprocessor, void *map_addr,
 			      struct process_context *pr_ctxt);
 
+/*
+ *  ======== proc_un_reserve_memory ========
+ *  Purpose:
+ *      Frees a previously reserved region of DSP address space.
+ *  Parameters:
+ *      hprocessor      :   The processor handle.
+ *      prsv_addr	:   Ptr to DSP side reservedBYTE address.
+ *  Returns:
+ *      0	 :   Success.
+ *      -EFAULT     :   Invalid processor handle.
+ *      -EPERM       :   General failure.
+ *      -ENOENT   :   Cannot find a reserved region starting with this
+ *		      :   address.
+ *  Requires:
+ *      prsv_addr is not NULL
+ *      PROC Initialized.
+ *  Ensures:
+ *  Details:
+ */
+extern int proc_un_reserve_memory(void *hprocessor,
+					 void *prsv_addr,
+					 struct process_context *pr_ctxt);
+
 #endif /* PROC_ */
diff --git a/drivers/staging/tidspbridge/pmgr/dev.c b/drivers/staging/tidspbridge/pmgr/dev.c
index 7b30267ef0e..132e960967b 100644
--- a/drivers/staging/tidspbridge/pmgr/dev.c
+++ b/drivers/staging/tidspbridge/pmgr/dev.c
@@ -34,6 +34,7 @@
 #include <dspbridge/cod.h>
 #include <dspbridge/drv.h>
 #include <dspbridge/proc.h>
+#include <dspbridge/dmm.h>
 
 /*  ----------------------------------- Resource Manager */
 #include <dspbridge/mgr.h>
@@ -74,6 +75,7 @@ struct dev_object {
 	struct msg_mgr *hmsg_mgr;	/* Message manager. */
 	struct io_mgr *hio_mgr;	/* IO manager (CHNL, msg_ctrl) */
 	struct cmm_object *hcmm_mgr;	/* SM memory manager. */
+	struct dmm_object *dmm_mgr;	/* Dynamic memory manager. */
 	struct ldr_module *module_obj;	/* Bridge Module handle. */
 	u32 word_size;		/* DSP word size: quick access. */
 	struct drv_object *hdrv_obj;	/* Driver Object */
@@ -248,6 +250,9 @@ int dev_create_device(struct dev_object **device_obj,
 			/* Instantiate the DEH module */
 			status = bridge_deh_create(&dev_obj->hdeh_mgr, dev_obj);
 		}
+		/* Create DMM mgr . */
+		status = dmm_create(&dev_obj->dmm_mgr,
+				    (struct dev_object *)dev_obj, NULL);
 	}
 	/* Add the new DEV_Object to the global list: */
 	if (!status) {
@@ -273,6 +278,8 @@ leave:
 			kfree(dev_obj->proc_list);
 			if (dev_obj->cod_mgr)
 				cod_delete(dev_obj->cod_mgr);
+			if (dev_obj->dmm_mgr)
+				dmm_destroy(dev_obj->dmm_mgr);
 			kfree(dev_obj);
 		}
 
@@ -382,6 +389,11 @@ int dev_destroy_device(struct dev_object *hdev_obj)
 			dev_obj->hcmm_mgr = NULL;
 		}
 
+		if (dev_obj->dmm_mgr) {
+			dmm_destroy(dev_obj->dmm_mgr);
+			dev_obj->dmm_mgr = NULL;
+		}
+
 		/* Call the driver's bridge_dev_destroy() function: */
 		/* Require of DevDestroy */
 		if (dev_obj->hbridge_context) {
@@ -462,6 +474,32 @@ int dev_get_cmm_mgr(struct dev_object *hdev_obj,
 }
 
 /*
+ *  ======== dev_get_dmm_mgr ========
+ *  Purpose:
+ *      Retrieve the handle to the dynamic memory manager created for this
+ *      device.
+ */
+int dev_get_dmm_mgr(struct dev_object *hdev_obj,
+			   struct dmm_object **mgr)
+{
+	int status = 0;
+	struct dev_object *dev_obj = hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(mgr != NULL);
+
+	if (hdev_obj) {
+		*mgr = dev_obj->dmm_mgr;
+	} else {
+		*mgr = NULL;
+		status = -EFAULT;
+	}
+
+	DBC_ENSURE(!status || (mgr != NULL && *mgr == NULL));
+	return status;
+}
+
+/*
  *  ======== dev_get_cod_mgr ========
  *  Purpose:
  *      Retrieve the COD manager create for this device.
@@ -713,8 +751,10 @@ void dev_exit(void)
 
 	refs--;
 
-	if (refs == 0)
+	if (refs == 0) {
 		cmm_exit();
+		dmm_exit();
+	}
 
 	DBC_ENSURE(refs >= 0);
 }
@@ -726,12 +766,25 @@ void dev_exit(void)
  */
 bool dev_init(void)
 {
-	bool ret = true;
+	bool cmm_ret, dmm_ret, ret = true;
 
 	DBC_REQUIRE(refs >= 0);
 
-	if (refs == 0)
-		ret = cmm_init();
+	if (refs == 0) {
+		cmm_ret = cmm_init();
+		dmm_ret = dmm_init();
+
+		ret = cmm_ret && dmm_ret;
+
+		if (!ret) {
+			if (cmm_ret)
+				cmm_exit();
+
+			if (dmm_ret)
+				dmm_exit();
+
+		}
+	}
 
 	if (ret)
 		refs++;
@@ -1065,6 +1118,8 @@ static void store_interface_fxns(struct bridge_drv_interface *drv_fxns,
 		STORE_FXN(fxn_brd_setstate, pfn_brd_set_state);
 		STORE_FXN(fxn_brd_memcopy, pfn_brd_mem_copy);
 		STORE_FXN(fxn_brd_memwrite, pfn_brd_mem_write);
+		STORE_FXN(fxn_brd_memmap, pfn_brd_mem_map);
+		STORE_FXN(fxn_brd_memunmap, pfn_brd_mem_un_map);
 		STORE_FXN(fxn_chnl_create, pfn_chnl_create);
 		STORE_FXN(fxn_chnl_destroy, pfn_chnl_destroy);
 		STORE_FXN(fxn_chnl_open, pfn_chnl_open);
diff --git a/drivers/staging/tidspbridge/pmgr/dmm.c b/drivers/staging/tidspbridge/pmgr/dmm.c
new file mode 100644
index 00000000000..8685233d762
--- /dev/null
+++ b/drivers/staging/tidspbridge/pmgr/dmm.c
@@ -0,0 +1,533 @@
+/*
+ * dmm.c
+ *
+ * DSP-BIOS Bridge driver support functions for TI OMAP processors.
+ *
+ * The Dynamic Memory Manager (DMM) module manages the DSP Virtual address
+ * space that can be directly mapped to any MPU buffer or memory region
+ *
+ * Notes:
+ *   Region: Generic memory entitiy having a start address and a size
+ *   Chunk:  Reserved region
+ *
+ * Copyright (C) 2005-2006 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#include <linux/types.h>
+
+/*  ----------------------------------- Host OS */
+#include <dspbridge/host_os.h>
+
+/*  ----------------------------------- DSP/BIOS Bridge */
+#include <dspbridge/dbdefs.h>
+
+/*  ----------------------------------- Trace & Debug */
+#include <dspbridge/dbc.h>
+
+/*  ----------------------------------- OS Adaptation Layer */
+#include <dspbridge/sync.h>
+
+/*  ----------------------------------- Platform Manager */
+#include <dspbridge/dev.h>
+#include <dspbridge/proc.h>
+
+/*  ----------------------------------- This */
+#include <dspbridge/dmm.h>
+
+/*  ----------------------------------- Defines, Data Structures, Typedefs */
+#define DMM_ADDR_VIRTUAL(a) \
+	(((struct map_page *)(a) - virtual_mapping_table) * PG_SIZE4K +\
+	dyn_mem_map_beg)
+#define DMM_ADDR_TO_INDEX(a) (((a) - dyn_mem_map_beg) / PG_SIZE4K)
+
+/* DMM Mgr */
+struct dmm_object {
+	/* Dmm Lock is used to serialize access mem manager for
+	 * multi-threads. */
+	spinlock_t dmm_lock;	/* Lock to access dmm mgr */
+};
+
+/*  ----------------------------------- Globals */
+static u32 refs;		/* module reference count */
+struct map_page {
+	u32 region_size:15;
+	u32 mapped_size:15;
+	u32 reserved:1;
+	u32 mapped:1;
+};
+
+/*  Create the free list */
+static struct map_page *virtual_mapping_table;
+static u32 free_region;		/* The index of free region */
+static u32 free_size;
+static u32 dyn_mem_map_beg;	/* The Beginning of dynamic memory mapping */
+static u32 table_size;		/* The size of virt and phys pages tables */
+
+/*  ----------------------------------- Function Prototypes */
+static struct map_page *get_region(u32 addr);
+static struct map_page *get_free_region(u32 len);
+static struct map_page *get_mapped_region(u32 addrs);
+
+/*  ======== dmm_create_tables ========
+ *  Purpose:
+ *      Create table to hold the information of physical address
+ *      the buffer pages that is passed by the user, and the table
+ *      to hold the information of the virtual memory that is reserved
+ *      for DSP.
+ */
+int dmm_create_tables(struct dmm_object *dmm_mgr, u32 addr, u32 size)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	int status = 0;
+
+	status = dmm_delete_tables(dmm_obj);
+	if (!status) {
+		dyn_mem_map_beg = addr;
+		table_size = PG_ALIGN_HIGH(size, PG_SIZE4K) / PG_SIZE4K;
+		/*  Create the free list */
+		virtual_mapping_table = __vmalloc(table_size *
+				sizeof(struct map_page), GFP_KERNEL |
+				__GFP_HIGHMEM | __GFP_ZERO, PAGE_KERNEL);
+		if (virtual_mapping_table == NULL)
+			status = -ENOMEM;
+		else {
+			/* On successful allocation,
+			 * all entries are zero ('free') */
+			free_region = 0;
+			free_size = table_size * PG_SIZE4K;
+			virtual_mapping_table[0].region_size = table_size;
+		}
+	}
+
+	if (status)
+		pr_err("%s: failure, status 0x%x\n", __func__, status);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_create ========
+ *  Purpose:
+ *      Create a dynamic memory manager object.
+ */
+int dmm_create(struct dmm_object **dmm_manager,
+		      struct dev_object *hdev_obj,
+		      const struct dmm_mgrattrs *mgr_attrts)
+{
+	struct dmm_object *dmm_obj = NULL;
+	int status = 0;
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dmm_manager != NULL);
+
+	*dmm_manager = NULL;
+	/* create, zero, and tag a cmm mgr object */
+	dmm_obj = kzalloc(sizeof(struct dmm_object), GFP_KERNEL);
+	if (dmm_obj != NULL) {
+		spin_lock_init(&dmm_obj->dmm_lock);
+		*dmm_manager = dmm_obj;
+	} else {
+		status = -ENOMEM;
+	}
+
+	return status;
+}
+
+/*
+ *  ======== dmm_destroy ========
+ *  Purpose:
+ *      Release the communication memory manager resources.
+ */
+int dmm_destroy(struct dmm_object *dmm_mgr)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	if (dmm_mgr) {
+		status = dmm_delete_tables(dmm_obj);
+		if (!status)
+			kfree(dmm_obj);
+	} else
+		status = -EFAULT;
+
+	return status;
+}
+
+/*
+ *  ======== dmm_delete_tables ========
+ *  Purpose:
+ *      Delete DMM Tables.
+ */
+int dmm_delete_tables(struct dmm_object *dmm_mgr)
+{
+	int status = 0;
+
+	DBC_REQUIRE(refs > 0);
+	/* Delete all DMM tables */
+	if (dmm_mgr)
+		vfree(virtual_mapping_table);
+	else
+		status = -EFAULT;
+	return status;
+}
+
+/*
+ *  ======== dmm_exit ========
+ *  Purpose:
+ *      Discontinue usage of module; free resources when reference count
+ *      reaches 0.
+ */
+void dmm_exit(void)
+{
+	DBC_REQUIRE(refs > 0);
+
+	refs--;
+}
+
+/*
+ *  ======== dmm_get_handle ========
+ *  Purpose:
+ *      Return the dynamic memory manager object for this device.
+ *      This is typically called from the client process.
+ */
+int dmm_get_handle(void *hprocessor, struct dmm_object **dmm_manager)
+{
+	int status = 0;
+	struct dev_object *hdev_obj;
+
+	DBC_REQUIRE(refs > 0);
+	DBC_REQUIRE(dmm_manager != NULL);
+	if (hprocessor != NULL)
+		status = proc_get_dev_object(hprocessor, &hdev_obj);
+	else
+		hdev_obj = dev_get_first();	/* default */
+
+	if (!status)
+		status = dev_get_dmm_mgr(hdev_obj, dmm_manager);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_init ========
+ *  Purpose:
+ *      Initializes private state of DMM module.
+ */
+bool dmm_init(void)
+{
+	bool ret = true;
+
+	DBC_REQUIRE(refs >= 0);
+
+	if (ret)
+		refs++;
+
+	DBC_ENSURE((ret && (refs > 0)) || (!ret && (refs >= 0)));
+
+	virtual_mapping_table = NULL;
+	table_size = 0;
+
+	return ret;
+}
+
+/*
+ *  ======== dmm_map_memory ========
+ *  Purpose:
+ *      Add a mapping block to the reserved chunk. DMM assumes that this block
+ *  will be mapped in the DSP/IVA's address space. DMM returns an error if a
+ *  mapping overlaps another one. This function stores the info that will be
+ *  required later while unmapping the block.
+ */
+int dmm_map_memory(struct dmm_object *dmm_mgr, u32 addr, u32 size)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *chunk;
+	int status = 0;
+
+	spin_lock(&dmm_obj->dmm_lock);
+	/* Find the Reserved memory chunk containing the DSP block to
+	 * be mapped */
+	chunk = (struct map_page *)get_region(addr);
+	if (chunk != NULL) {
+		/* Mark the region 'mapped', leave the 'reserved' info as-is */
+		chunk->mapped = true;
+		chunk->mapped_size = (size / PG_SIZE4K);
+	} else
+		status = -ENOENT;
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s dmm_mgr %p, addr %x, size %x\n\tstatus %x, "
+		"chunk %p", __func__, dmm_mgr, addr, size, status, chunk);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_reserve_memory ========
+ *  Purpose:
+ *      Reserve a chunk of virtually contiguous DSP/IVA address space.
+ */
+int dmm_reserve_memory(struct dmm_object *dmm_mgr, u32 size,
+			      u32 *prsv_addr)
+{
+	int status = 0;
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *node;
+	u32 rsv_addr = 0;
+	u32 rsv_size = 0;
+
+	spin_lock(&dmm_obj->dmm_lock);
+
+	/* Try to get a DSP chunk from the free list */
+	node = get_free_region(size);
+	if (node != NULL) {
+		/*  DSP chunk of given size is available. */
+		rsv_addr = DMM_ADDR_VIRTUAL(node);
+		/* Calculate the number entries to use */
+		rsv_size = size / PG_SIZE4K;
+		if (rsv_size < node->region_size) {
+			/* Mark remainder of free region */
+			node[rsv_size].mapped = false;
+			node[rsv_size].reserved = false;
+			node[rsv_size].region_size =
+			    node->region_size - rsv_size;
+			node[rsv_size].mapped_size = 0;
+		}
+		/*  get_region will return first fit chunk. But we only use what
+		   is requested. */
+		node->mapped = false;
+		node->reserved = true;
+		node->region_size = rsv_size;
+		node->mapped_size = 0;
+		/* Return the chunk's starting address */
+		*prsv_addr = rsv_addr;
+	} else
+		/*dSP chunk of given size is not available */
+		status = -ENOMEM;
+
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s dmm_mgr %p, size %x, prsv_addr %p\n\tstatus %x, "
+		"rsv_addr %x, rsv_size %x\n", __func__, dmm_mgr, size,
+		prsv_addr, status, rsv_addr, rsv_size);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_un_map_memory ========
+ *  Purpose:
+ *      Remove the mapped block from the reserved chunk.
+ */
+int dmm_un_map_memory(struct dmm_object *dmm_mgr, u32 addr, u32 *psize)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *chunk;
+	int status = 0;
+
+	spin_lock(&dmm_obj->dmm_lock);
+	chunk = get_mapped_region(addr);
+	if (chunk == NULL)
+		status = -ENOENT;
+
+	if (!status) {
+		/* Unmap the region */
+		*psize = chunk->mapped_size * PG_SIZE4K;
+		chunk->mapped = false;
+		chunk->mapped_size = 0;
+	}
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s: dmm_mgr %p, addr %x, psize %p\n\tstatus %x, "
+		"chunk %p\n", __func__, dmm_mgr, addr, psize, status, chunk);
+
+	return status;
+}
+
+/*
+ *  ======== dmm_un_reserve_memory ========
+ *  Purpose:
+ *      Free a chunk of reserved DSP/IVA address space.
+ */
+int dmm_un_reserve_memory(struct dmm_object *dmm_mgr, u32 rsv_addr)
+{
+	struct dmm_object *dmm_obj = (struct dmm_object *)dmm_mgr;
+	struct map_page *chunk;
+	u32 i;
+	int status = 0;
+	u32 chunk_size;
+
+	spin_lock(&dmm_obj->dmm_lock);
+
+	/* Find the chunk containing the reserved address */
+	chunk = get_mapped_region(rsv_addr);
+	if (chunk == NULL)
+		status = -ENOENT;
+
+	if (!status) {
+		/* Free all the mapped pages for this reserved region */
+		i = 0;
+		while (i < chunk->region_size) {
+			if (chunk[i].mapped) {
+				/* Remove mapping from the page tables. */
+				chunk_size = chunk[i].mapped_size;
+				/* Clear the mapping flags */
+				chunk[i].mapped = false;
+				chunk[i].mapped_size = 0;
+				i += chunk_size;
+			} else
+				i++;
+		}
+		/* Clear the flags (mark the region 'free') */
+		chunk->reserved = false;
+		/* NOTE: We do NOT coalesce free regions here.
+		 * Free regions are coalesced in get_region(), as it traverses
+		 *the whole mapping table
+		 */
+	}
+	spin_unlock(&dmm_obj->dmm_lock);
+
+	dev_dbg(bridge, "%s: dmm_mgr %p, rsv_addr %x\n\tstatus %x chunk %p",
+		__func__, dmm_mgr, rsv_addr, status, chunk);
+
+	return status;
+}
+
+/*
+ *  ======== get_region ========
+ *  Purpose:
+ *      Returns a region containing the specified memory region
+ */
+static struct map_page *get_region(u32 addr)
+{
+	struct map_page *curr_region = NULL;
+	u32 i = 0;
+
+	if (virtual_mapping_table != NULL) {
+		/* find page mapped by this address */
+		i = DMM_ADDR_TO_INDEX(addr);
+		if (i < table_size)
+			curr_region = virtual_mapping_table + i;
+	}
+
+	dev_dbg(bridge, "%s: curr_region %p, free_region %d, free_size %d\n",
+		__func__, curr_region, free_region, free_size);
+	return curr_region;
+}
+
+/*
+ *  ======== get_free_region ========
+ *  Purpose:
+ *  Returns the requested free region
+ */
+static struct map_page *get_free_region(u32 len)
+{
+	struct map_page *curr_region = NULL;
+	u32 i = 0;
+	u32 region_size = 0;
+	u32 next_i = 0;
+
+	if (virtual_mapping_table == NULL)
+		return curr_region;
+	if (len > free_size) {
+		/* Find the largest free region
+		 * (coalesce during the traversal) */
+		while (i < table_size) {
+			region_size = virtual_mapping_table[i].region_size;
+			next_i = i + region_size;
+			if (virtual_mapping_table[i].reserved == false) {
+				/* Coalesce, if possible */
+				if (next_i < table_size &&
+				    virtual_mapping_table[next_i].reserved
+				    == false) {
+					virtual_mapping_table[i].region_size +=
+					    virtual_mapping_table
+					    [next_i].region_size;
+					continue;
+				}
+				region_size *= PG_SIZE4K;
+				if (region_size > free_size) {
+					free_region = i;
+					free_size = region_size;
+				}
+			}
+			i = next_i;
+		}
+	}
+	if (len <= free_size) {
+		curr_region = virtual_mapping_table + free_region;
+		free_region += (len / PG_SIZE4K);
+		free_size -= len;
+	}
+	return curr_region;
+}
+
+/*
+ *  ======== get_mapped_region ========
+ *  Purpose:
+ *  Returns the requestedmapped region
+ */
+static struct map_page *get_mapped_region(u32 addrs)
+{
+	u32 i = 0;
+	struct map_page *curr_region = NULL;
+
+	if (virtual_mapping_table == NULL)
+		return curr_region;
+
+	i = DMM_ADDR_TO_INDEX(addrs);
+	if (i < table_size && (virtual_mapping_table[i].mapped ||
+			       virtual_mapping_table[i].reserved))
+		curr_region = virtual_mapping_table + i;
+	return curr_region;
+}
+
+#ifdef DSP_DMM_DEBUG
+u32 dmm_mem_map_dump(struct dmm_object *dmm_mgr)
+{
+	struct map_page *curr_node = NULL;
+	u32 i;
+	u32 freemem = 0;
+	u32 bigsize = 0;
+
+	spin_lock(&dmm_mgr->dmm_lock);
+
+	if (virtual_mapping_table != NULL) {
+		for (i = 0; i < table_size; i +=
+		     virtual_mapping_table[i].region_size) {
+			curr_node = virtual_mapping_table + i;
+			if (curr_node->reserved) {
+				/*printk("RESERVED size = 0x%x, "
+				   "Map size = 0x%x\n",
+				   (curr_node->region_size * PG_SIZE4K),
+				   (curr_node->mapped == false) ? 0 :
+				   (curr_node->mapped_size * PG_SIZE4K));
+				 */
+			} else {
+/*				printk("UNRESERVED size = 0x%x\n",
+					(curr_node->region_size * PG_SIZE4K));
+ */
+				freemem += (curr_node->region_size * PG_SIZE4K);
+				if (curr_node->region_size > bigsize)
+					bigsize = curr_node->region_size;
+			}
+		}
+	}
+	spin_unlock(&dmm_mgr->dmm_lock);
+	printk(KERN_INFO "Total DSP VA FREE memory = %d Mbytes\n",
+	       freemem / (1024 * 1024));
+	printk(KERN_INFO "Total DSP VA USED memory= %d Mbytes \n",
+	       (((table_size * PG_SIZE4K) - freemem)) / (1024 * 1024));
+	printk(KERN_INFO "DSP VA - Biggest FREE block = %d Mbytes \n\n",
+	       (bigsize * PG_SIZE4K / (1024 * 1024)));
+
+	return 0;
+}
+#endif
diff --git a/drivers/staging/tidspbridge/pmgr/dspapi.c b/drivers/staging/tidspbridge/pmgr/dspapi.c
index 981551ce4d7..86ca785f191 100644
--- a/drivers/staging/tidspbridge/pmgr/dspapi.c
+++ b/drivers/staging/tidspbridge/pmgr/dspapi.c
@@ -993,10 +993,27 @@ u32 procwrap_register_notify(union trapped_args *args, void *pr_ctxt)
 /*
  * ======== procwrap_reserve_memory ========
  */
-u32 __deprecated procwrap_reserve_memory(union trapped_args *args,
-							void *pr_ctxt)
+u32 procwrap_reserve_memory(union trapped_args *args, void *pr_ctxt)
 {
-	return 0;
+	int status;
+	void *prsv_addr;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	if ((args->args_proc_rsvmem.ul_size <= 0) ||
+	    (args->args_proc_rsvmem.ul_size & (PG_SIZE4K - 1)) != 0)
+		return -EINVAL;
+
+	status = proc_reserve_memory(hprocessor,
+				     args->args_proc_rsvmem.ul_size, &prsv_addr,
+				     pr_ctxt);
+	if (!status) {
+		if (put_user(prsv_addr, args->args_proc_rsvmem.pp_rsv_addr)) {
+			status = -EINVAL;
+			proc_un_reserve_memory(args->args_proc_rsvmem.
+					       hprocessor, prsv_addr, pr_ctxt);
+		}
+	}
+	return status;
 }
 
 /*
@@ -1025,10 +1042,15 @@ u32 procwrap_un_map(union trapped_args *args, void *pr_ctxt)
 /*
  * ======== procwrap_un_reserve_memory ========
  */
-u32 __deprecated procwrap_un_reserve_memory(union trapped_args *args,
-							void *pr_ctxt)
+u32 procwrap_un_reserve_memory(union trapped_args *args, void *pr_ctxt)
 {
-	return 0;
+	int status;
+	void *hprocessor = ((struct process_context *)pr_ctxt)->hprocessor;
+
+	status = proc_un_reserve_memory(hprocessor,
+					args->args_proc_unrsvmem.prsv_addr,
+					pr_ctxt);
+	return status;
 }
 
 /*
diff --git a/drivers/staging/tidspbridge/rmgr/drv.c b/drivers/staging/tidspbridge/rmgr/drv.c
index 91cc168516e..81b1b901355 100644
--- a/drivers/staging/tidspbridge/rmgr/drv.c
+++ b/drivers/staging/tidspbridge/rmgr/drv.c
@@ -146,6 +146,7 @@ int drv_remove_all_dmm_res_elements(void *process_ctxt)
 	struct process_context *ctxt = (struct process_context *)process_ctxt;
 	int status = 0;
 	struct dmm_map_object *temp_map, *map_obj;
+	struct dmm_rsv_object *temp_rsv, *rsv_obj;
 
 	/* Free DMM mapped memory resources */
 	list_for_each_entry_safe(map_obj, temp_map, &ctxt->dmm_map_list, link) {
@@ -155,6 +156,16 @@ int drv_remove_all_dmm_res_elements(void *process_ctxt)
 			pr_err("%s: proc_un_map failed!"
 			       " status = 0x%xn", __func__, status);
 	}
+
+	/* Free DMM reserved memory resources */
+	list_for_each_entry_safe(rsv_obj, temp_rsv, &ctxt->dmm_rsv_list, link) {
+		status = proc_un_reserve_memory(ctxt->hprocessor, (void *)
+						rsv_obj->dsp_reserved_addr,
+						ctxt);
+		if (status)
+			pr_err("%s: proc_un_reserve_memory failed!"
+			       " status = 0x%xn", __func__, status);
+	}
 	return status;
 }
 
@@ -732,6 +743,7 @@ static int request_bridge_resources(struct cfg_hostres *res)
 	host_res->dw_sys_ctrl_base = ioremap(OMAP_SYSC_BASE, OMAP_SYSC_SIZE);
 	dev_dbg(bridge, "dw_mem_base[0] 0x%x\n", host_res->dw_mem_base[0]);
 	dev_dbg(bridge, "dw_mem_base[3] 0x%x\n", host_res->dw_mem_base[3]);
+	dev_dbg(bridge, "dw_dmmu_base %p\n", host_res->dw_dmmu_base);
 
 	/* for 24xx base port is not mapping the mamory for DSP
 	 * internal memory TODO Do a ioremap here */
@@ -785,6 +797,8 @@ int drv_request_bridge_res_dsp(void **phost_resources)
 							 OMAP_PER_PRM_SIZE);
 		host_res->dw_core_pm_base = (u32) ioremap(OMAP_CORE_PRM_BASE,
 							  OMAP_CORE_PRM_SIZE);
+		host_res->dw_dmmu_base = ioremap(OMAP_DMMU_BASE,
+						 OMAP_DMMU_SIZE);
 
 		dev_dbg(bridge, "dw_mem_base[0] 0x%x\n",
 			host_res->dw_mem_base[0]);
@@ -796,6 +810,7 @@ int drv_request_bridge_res_dsp(void **phost_resources)
 			host_res->dw_mem_base[3]);
 		dev_dbg(bridge, "dw_mem_base[4] 0x%x\n",
 			host_res->dw_mem_base[4]);
+		dev_dbg(bridge, "dw_dmmu_base %p\n", host_res->dw_dmmu_base);
 
 		shm_size = drv_datap->shm_size;
 		if (shm_size >= 0x10000) {
diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c
index 34be43fec04..324fcdffb3b 100644
--- a/drivers/staging/tidspbridge/rmgr/drv_interface.c
+++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c
@@ -509,6 +509,8 @@ static int bridge_open(struct inode *ip, struct file *filp)
 		pr_ctxt->res_state = PROC_RES_ALLOCATED;
 		spin_lock_init(&pr_ctxt->dmm_map_lock);
 		INIT_LIST_HEAD(&pr_ctxt->dmm_map_list);
+		spin_lock_init(&pr_ctxt->dmm_rsv_lock);
+		INIT_LIST_HEAD(&pr_ctxt->dmm_rsv_list);
 
 		pr_ctxt->node_id = kzalloc(sizeof(struct idr), GFP_KERNEL);
 		if (pr_ctxt->node_id) {
diff --git a/drivers/staging/tidspbridge/rmgr/node.c b/drivers/staging/tidspbridge/rmgr/node.c
index a660247f527..1562f3c1281 100644
--- a/drivers/staging/tidspbridge/rmgr/node.c
+++ b/drivers/staging/tidspbridge/rmgr/node.c
@@ -56,6 +56,7 @@
 /*  ----------------------------------- This */
 #include <dspbridge/nodepriv.h>
 #include <dspbridge/node.h>
+#include <dspbridge/dmm.h>
 
 /* Static/Dynamic Loader includes */
 #include <dspbridge/dbll.h>
@@ -316,6 +317,10 @@ int node_allocate(struct proc_object *hprocessor,
 	u32 mapped_addr = 0;
 	u32 map_attrs = 0x0;
 	struct dsp_processorstate proc_state;
+#ifdef DSP_DMM_DEBUG
+	struct dmm_object *dmm_mgr;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+#endif
 
 	void *node_res;
 
@@ -425,12 +430,34 @@ int node_allocate(struct proc_object *hprocessor,
 	if (status)
 		goto func_cont;
 
+	status = proc_reserve_memory(hprocessor,
+				     pnode->create_args.asa.task_arg_obj.
+				     heap_size + PAGE_SIZE,
+				     (void **)&(pnode->create_args.asa.
+					task_arg_obj.udsp_heap_res_addr),
+				     pr_ctxt);
+	if (status) {
+		pr_err("%s: Failed to reserve memory for heap: 0x%x\n",
+		       __func__, status);
+		goto func_cont;
+	}
+#ifdef DSP_DMM_DEBUG
+	status = dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = DSP_EHANDLE;
+		goto func_cont;
+	}
+
+	dmm_mem_map_dump(dmm_mgr);
+#endif
+
 	map_attrs |= DSP_MAPLITTLEENDIAN;
 	map_attrs |= DSP_MAPELEMSIZE32;
 	map_attrs |= DSP_MAPVIRTUALADDR;
 	status = proc_map(hprocessor, (void *)attr_in->pgpp_virt_addr,
 			  pnode->create_args.asa.task_arg_obj.heap_size,
-			  NULL, (void **)&mapped_addr, map_attrs,
+			  (void *)pnode->create_args.asa.task_arg_obj.
+			  udsp_heap_res_addr, (void **)&mapped_addr, map_attrs,
 			  pr_ctxt);
 	if (status)
 		pr_err("%s: Failed to map memory for Heap: 0x%x\n",
@@ -2484,7 +2511,11 @@ static void delete_node(struct node_object *hnode,
 	struct stream_chnl stream;
 	struct node_msgargs node_msg_args;
 	struct node_taskargs task_arg_obj;
-
+#ifdef DSP_DMM_DEBUG
+	struct dmm_object *dmm_mgr;
+	struct proc_object *p_proc_object =
+	    (struct proc_object *)hnode->hprocessor;
+#endif
 	int status;
 	if (!hnode)
 		goto func_end;
@@ -2545,6 +2576,19 @@ static void delete_node(struct node_object *hnode,
 			status = proc_un_map(hnode->hprocessor, (void *)
 					     task_arg_obj.udsp_heap_addr,
 					     pr_ctxt);
+
+			status = proc_un_reserve_memory(hnode->hprocessor,
+							(void *)
+							task_arg_obj.
+							udsp_heap_res_addr,
+							pr_ctxt);
+#ifdef DSP_DMM_DEBUG
+			status = dmm_get_handle(p_proc_object, &dmm_mgr);
+			if (dmm_mgr)
+				dmm_mem_map_dump(dmm_mgr);
+			else
+				status = DSP_EHANDLE;
+#endif
 		}
 	}
 	if (node_type != NODE_MESSAGE) {
diff --git a/drivers/staging/tidspbridge/rmgr/proc.c b/drivers/staging/tidspbridge/rmgr/proc.c
index 7a15a02efed..b47d7aa747b 100644
--- a/drivers/staging/tidspbridge/rmgr/proc.c
+++ b/drivers/staging/tidspbridge/rmgr/proc.c
@@ -39,6 +39,7 @@
 #include <dspbridge/cod.h>
 #include <dspbridge/dev.h>
 #include <dspbridge/procpriv.h>
+#include <dspbridge/dmm.h>
 
 /*  ----------------------------------- Resource Manager */
 #include <dspbridge/mgr.h>
@@ -51,7 +52,6 @@
 #include <dspbridge/msg.h>
 #include <dspbridge/dspioctl.h>
 #include <dspbridge/drv.h>
-#include <_tiomap.h>
 
 /*  ----------------------------------- This */
 #include <dspbridge/proc.h>
@@ -151,21 +151,34 @@ static struct dmm_map_object *add_mapping_info(struct process_context *pr_ctxt,
 	return map_obj;
 }
 
+static int match_exact_map_obj(struct dmm_map_object *map_obj,
+					u32 dsp_addr, u32 size)
+{
+	if (map_obj->dsp_addr == dsp_addr && map_obj->size != size)
+		pr_err("%s: addr match (0x%x), size don't (0x%x != 0x%x)\n",
+				__func__, dsp_addr, map_obj->size, size);
+
+	return map_obj->dsp_addr == dsp_addr &&
+		map_obj->size == size;
+}
+
 static void remove_mapping_information(struct process_context *pr_ctxt,
-						u32 dsp_addr)
+						u32 dsp_addr, u32 size)
 {
 	struct dmm_map_object *map_obj;
 
-	pr_debug("%s: looking for virt 0x%x\n", __func__, dsp_addr);
+	pr_debug("%s: looking for virt 0x%x size 0x%x\n", __func__,
+							dsp_addr, size);
 
 	spin_lock(&pr_ctxt->dmm_map_lock);
 	list_for_each_entry(map_obj, &pr_ctxt->dmm_map_list, link) {
-		pr_debug("%s: candidate: mpu_addr 0x%x virt 0x%x\n",
+		pr_debug("%s: candidate: mpu_addr 0x%x virt 0x%x size 0x%x\n",
 							__func__,
 							map_obj->mpu_addr,
-							map_obj->dsp_addr);
+							map_obj->dsp_addr,
+							map_obj->size);
 
-		if (map_obj->dsp_addr == dsp_addr) {
+		if (match_exact_map_obj(map_obj, dsp_addr, size)) {
 			pr_debug("%s: match, deleting map info\n", __func__);
 			list_del(&map_obj->link);
 			kfree(map_obj->dma_info.sg);
@@ -1077,6 +1090,7 @@ int proc_load(void *hprocessor, const s32 argc_index,
 	s32 cnew_envp;		/* "  " in new_envp[] */
 	s32 nproc_id = 0;	/* Anticipate MP version. */
 	struct dcd_manager *hdcd_handle;
+	struct dmm_object *dmm_mgr;
 	u32 dw_ext_end;
 	u32 proc_id;
 	int brd_state;
@@ -1267,6 +1281,25 @@ int proc_load(void *hprocessor, const s32 argc_index,
 			if (!status)
 				status = cod_get_sym_value(cod_mgr, EXTEND,
 							   &dw_ext_end);
+
+			/* Reset DMM structs and add an initial free chunk */
+			if (!status) {
+				status =
+				    dev_get_dmm_mgr(p_proc_object->hdev_obj,
+						    &dmm_mgr);
+				if (dmm_mgr) {
+					/* Set dw_ext_end to DMM START u8
+					 * address */
+					dw_ext_end =
+					    (dw_ext_end + 1) * DSPWORDSIZE;
+					/* DMM memory is from EXT_END */
+					status = dmm_create_tables(dmm_mgr,
+								   dw_ext_end,
+								   DMMPOOLSIZE);
+				} else {
+					status = -EFAULT;
+				}
+			}
 		}
 	}
 	/* Restore the original argv[0] */
@@ -1319,10 +1352,12 @@ int proc_map(void *hprocessor, void *pmpu_addr, u32 ul_size,
 {
 	u32 va_align;
 	u32 pa_align;
+	struct dmm_object *dmm_mgr;
 	u32 size_align;
 	int status = 0;
 	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
 	struct dmm_map_object *map_obj;
+	u32 tmp_addr = 0;
 
 #ifdef CONFIG_TIDSPBRIDGE_CACHE_LINE_CHECK
 	if ((ul_map_attr & BUFMODE_MASK) != RBUF) {
@@ -1347,30 +1382,33 @@ int proc_map(void *hprocessor, void *pmpu_addr, u32 ul_size,
 	}
 	/* Critical section */
 	mutex_lock(&proc_lock);
+	dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (dmm_mgr)
+		status = dmm_map_memory(dmm_mgr, va_align, size_align);
+	else
+		status = -EFAULT;
 
 	/* Add mapping to the page tables. */
 	if (!status) {
+
+		/* Mapped address = MSB of VA | LSB of PA */
+		tmp_addr = (va_align | ((u32) pmpu_addr & (PG_SIZE4K - 1)));
 		/* mapped memory resource tracking */
-		map_obj = add_mapping_info(pr_ctxt, pa_align, va_align,
+		map_obj = add_mapping_info(pr_ctxt, pa_align, tmp_addr,
 						size_align);
-		if (!map_obj) {
+		if (!map_obj)
 			status = -ENOMEM;
-		} else {
-			va_align = user_to_dsp_map(
-				p_proc_object->hbridge_context->dsp_mmu,
-				pa_align, va_align, size_align,
-				map_obj->pages);
-			if (IS_ERR_VALUE(va_align))
-				status = (int)va_align;
-		}
+		else
+			status = (*p_proc_object->intf_fxns->pfn_brd_mem_map)
+			    (p_proc_object->hbridge_context, pa_align, va_align,
+			     size_align, ul_map_attr, map_obj->pages);
 	}
 	if (!status) {
 		/* Mapped address = MSB of VA | LSB of PA */
-		map_obj->dsp_addr = (va_align |
-					((u32)pmpu_addr & (PG_SIZE4K - 1)));
-		*pp_map_addr = (void *)map_obj->dsp_addr;
+		*pp_map_addr = (void *) tmp_addr;
 	} else {
-		remove_mapping_information(pr_ctxt, va_align);
+		remove_mapping_information(pr_ctxt, tmp_addr, size_align);
+		dmm_un_map_memory(dmm_mgr, va_align, &size_align);
 	}
 	mutex_unlock(&proc_lock);
 
@@ -1463,6 +1501,55 @@ func_end:
 }
 
 /*
+ *  ======== proc_reserve_memory ========
+ *  Purpose:
+ *      Reserve a virtually contiguous region of DSP address space.
+ */
+int proc_reserve_memory(void *hprocessor, u32 ul_size,
+			       void **pp_rsv_addr,
+			       struct process_context *pr_ctxt)
+{
+	struct dmm_object *dmm_mgr;
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct dmm_rsv_object *rsv_obj;
+
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_reserve_memory(dmm_mgr, ul_size, (u32 *) pp_rsv_addr);
+	if (status != 0)
+		goto func_end;
+
+	/*
+	 * A successful reserve should be followed by insertion of rsv_obj
+	 * into dmm_rsv_list, so that reserved memory resource tracking
+	 * remains uptodate
+	 */
+	rsv_obj = kmalloc(sizeof(struct dmm_rsv_object), GFP_KERNEL);
+	if (rsv_obj) {
+		rsv_obj->dsp_reserved_addr = (u32) *pp_rsv_addr;
+		spin_lock(&pr_ctxt->dmm_rsv_lock);
+		list_add(&rsv_obj->link, &pr_ctxt->dmm_rsv_list);
+		spin_unlock(&pr_ctxt->dmm_rsv_lock);
+	}
+
+func_end:
+	dev_dbg(bridge, "%s: hprocessor: 0x%p ul_size: 0x%x pp_rsv_addr: 0x%p "
+		"status 0x%x\n", __func__, hprocessor,
+		ul_size, pp_rsv_addr, status);
+	return status;
+}
+
+/*
  *  ======== proc_start ========
  *  Purpose:
  *      Start a processor running.
@@ -1610,7 +1697,9 @@ int proc_un_map(void *hprocessor, void *map_addr,
 {
 	int status = 0;
 	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct dmm_object *dmm_mgr;
 	u32 va_align;
+	u32 size_align;
 
 	va_align = PG_ALIGN_LOW((u32) map_addr, PG_SIZE4K);
 	if (!p_proc_object) {
@@ -1618,11 +1707,24 @@ int proc_un_map(void *hprocessor, void *map_addr,
 		goto func_end;
 	}
 
+	status = dmm_get_handle(hprocessor, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
 	/* Critical section */
 	mutex_lock(&proc_lock);
+	/*
+	 * Update DMM structures. Get the size to unmap.
+	 * This function returns error if the VA is not mapped
+	 */
+	status = dmm_un_map_memory(dmm_mgr, (u32) va_align, &size_align);
 	/* Remove mapping from the page tables. */
-	status = user_to_dsp_unmap(p_proc_object->hbridge_context->dsp_mmu,
-								va_align);
+	if (!status) {
+		status = (*p_proc_object->intf_fxns->pfn_brd_mem_un_map)
+		    (p_proc_object->hbridge_context, va_align, size_align);
+	}
 
 	mutex_unlock(&proc_lock);
 	if (status)
@@ -1633,7 +1735,7 @@ int proc_un_map(void *hprocessor, void *map_addr,
 	 * from dmm_map_list, so that mapped memory resource tracking
 	 * remains uptodate
 	 */
-	remove_mapping_information(pr_ctxt, (u32) map_addr);
+	remove_mapping_information(pr_ctxt, (u32) map_addr, size_align);
 
 func_end:
 	dev_dbg(bridge, "%s: hprocessor: 0x%p map_addr: 0x%p status: 0x%x\n",
@@ -1642,6 +1744,55 @@ func_end:
 }
 
 /*
+ *  ======== proc_un_reserve_memory ========
+ *  Purpose:
+ *      Frees a previously reserved region of DSP address space.
+ */
+int proc_un_reserve_memory(void *hprocessor, void *prsv_addr,
+				  struct process_context *pr_ctxt)
+{
+	struct dmm_object *dmm_mgr;
+	int status = 0;
+	struct proc_object *p_proc_object = (struct proc_object *)hprocessor;
+	struct dmm_rsv_object *rsv_obj;
+
+	if (!p_proc_object) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_get_handle(p_proc_object, &dmm_mgr);
+	if (!dmm_mgr) {
+		status = -EFAULT;
+		goto func_end;
+	}
+
+	status = dmm_un_reserve_memory(dmm_mgr, (u32) prsv_addr);
+	if (status != 0)
+		goto func_end;
+
+	/*
+	 * A successful unreserve should be followed by removal of rsv_obj
+	 * from dmm_rsv_list, so that reserved memory resource tracking
+	 * remains uptodate
+	 */
+	spin_lock(&pr_ctxt->dmm_rsv_lock);
+	list_for_each_entry(rsv_obj, &pr_ctxt->dmm_rsv_list, link) {
+		if (rsv_obj->dsp_reserved_addr == (u32) prsv_addr) {
+			list_del(&rsv_obj->link);
+			kfree(rsv_obj);
+			break;
+		}
+	}
+	spin_unlock(&pr_ctxt->dmm_rsv_lock);
+
+func_end:
+	dev_dbg(bridge, "%s: hprocessor: 0x%p prsv_addr: 0x%p status: 0x%x\n",
+		__func__, hprocessor, prsv_addr, status);
+	return status;
+}
+
+/*
  *  ======== = proc_monitor ======== ==
  *  Purpose:
  *      Place the Processor in Monitor State. This is an internal
diff --git a/drivers/staging/tm6000/Kconfig b/drivers/staging/tm6000/Kconfig
index de7ebb99d8f..114eec8a630 100644
--- a/drivers/staging/tm6000/Kconfig
+++ b/drivers/staging/tm6000/Kconfig
@@ -1,6 +1,6 @@
 config VIDEO_TM6000
 	tristate "TV Master TM5600/6000/6010 driver"
-	depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL
+	depends on VIDEO_DEV && I2C && INPUT && RC_CORE && USB && EXPERIMENTAL
 	select VIDEO_TUNER
 	select MEDIA_TUNER_XC2028
 	select MEDIA_TUNER_XC5000
diff --git a/drivers/staging/tm6000/TODO b/drivers/staging/tm6000/TODO
index 34780fc17b1..135d0ea3ad7 100644
--- a/drivers/staging/tm6000/TODO
+++ b/drivers/staging/tm6000/TODO
@@ -1,4 +1,6 @@
 There a few things to do before putting this driver in production:
+	- IR NEC with tm5600/6000 TV cards
+	- IR RC5 with tm5600/6000/6010 TV cards
 	- CodingStyle;
 	- Fix audio;
 	- Fix some panic/OOPS conditions.
diff --git a/drivers/staging/tm6000/tm6000-cards.c b/drivers/staging/tm6000/tm6000-cards.c
index 664e6038090..455038bdfc9 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -328,6 +328,47 @@ struct usb_device_id tm6000_id_table[] = {
 	{ },
 };
 
+/* Control power led for show some activity */
+void tm6000_flash_led(struct tm6000_core *dev, u8 state)
+{
+	/* Power LED unconfigured */
+	if (!dev->gpio.power_led)
+		return;
+
+	/* ON Power LED */
+	if (state) {
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x00);
+			break;
+		case TM6010_BOARD_BEHOLD_WANDER:
+		case TM6010_BOARD_BEHOLD_VOYAGER:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x01);
+			break;
+		}
+	}
+	/* OFF Power LED */
+	else {
+		switch (dev->model) {
+		case TM6010_BOARD_HAUPPAUGE_900H:
+		case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
+		case TM6010_BOARD_TWINHAN_TU501:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x01);
+			break;
+		case TM6010_BOARD_BEHOLD_WANDER:
+		case TM6010_BOARD_BEHOLD_VOYAGER:
+			tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+				dev->gpio.power_led, 0x00);
+			break;
+		}
+	}
+}
+
 /* Tuner callback to provide the proper gpio changes needed for xc5000 */
 int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
 {
@@ -521,13 +562,6 @@ int tm6000_cards_setup(struct tm6000_core *dev)
 				printk(KERN_ERR "Error %i doing tuner reset\n", rc);
 				return rc;
 			}
-			msleep(10);
-
-			if (!i) {
-				rc = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
-				if (rc >= 0)
-					printk(KERN_DEBUG "board=0x%08x\n", rc);
-			}
 		}
 	} else {
 		printk(KERN_ERR "Tuner reset is not configured\n");
@@ -545,7 +579,7 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
 
 	/* Load tuner module */
 	v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-		NULL, "tuner", dev->tuner_addr, NULL);
+		"tuner", dev->tuner_addr, NULL);
 
 	memset(&tun_setup, 0, sizeof(tun_setup));
 	tun_setup.type = dev->tuner_type;
@@ -683,7 +717,7 @@ static int tm6000_init_dev(struct tm6000_core *dev)
 
 	if (dev->caps.has_tda9874)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			NULL, "tvaudio", I2C_ADDR_TDA9874, NULL);
+			"tvaudio", I2C_ADDR_TDA9874, NULL);
 
 	/* register and initialize V4L2 */
 	rc = tm6000_v4l2_register(dev);
diff --git a/drivers/staging/tm6000/tm6000-core.c b/drivers/staging/tm6000/tm6000-core.c
index 40a0206e243..96aed4ace46 100644
--- a/drivers/staging/tm6000/tm6000-core.c
+++ b/drivers/staging/tm6000/tm6000-core.c
@@ -542,6 +542,26 @@ int tm6000_init(struct tm6000_core *dev)
 	int board, rc = 0, i, size;
 	struct reg_init *tab;
 
+	/* Check board revision */
+	board = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
+	if (board >= 0) {
+		switch (board & 0xff) {
+		case 0xf3:
+			printk(KERN_INFO "Found tm6000\n");
+			if (dev->dev_type != TM6000)
+				dev->dev_type = TM6000;
+			break;
+		case 0xf4:
+			printk(KERN_INFO "Found tm6010\n");
+			if (dev->dev_type != TM6010)
+				dev->dev_type = TM6010;
+			break;
+		default:
+			printk(KERN_INFO "Unknown board version = 0x%08x\n", board);
+		}
+	} else
+		printk(KERN_ERR "Error %i while retrieving board version\n", board);
+
 	if (dev->dev_type == TM6010) {
 		tab = tm6010_init_tab;
 		size = ARRAY_SIZE(tm6010_init_tab);
@@ -563,13 +583,6 @@ int tm6000_init(struct tm6000_core *dev)
 
 	msleep(5); /* Just to be conservative */
 
-	/* Check board version - maybe 10Moons specific */
-	board = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0);
-	if (board >= 0)
-		printk(KERN_INFO "Board version = 0x%08x\n", board);
-	else
-		printk(KERN_ERR "Error %i while retrieving board version\n", board);
-
 	rc = tm6000_cards_setup(dev);
 
 	return rc;
@@ -709,5 +722,5 @@ void tm6000_close_extension(struct tm6000_core *dev)
 				ops->fini(dev);
 		}
 	}
-	mutex_lock(&tm6000_devlist_mutex);
+	mutex_unlock(&tm6000_devlist_mutex);
 }
diff --git a/drivers/staging/tm6000/tm6000-i2c.c b/drivers/staging/tm6000/tm6000-i2c.c
index 93f625fc852..18de4748f27 100644
--- a/drivers/staging/tm6000/tm6000-i2c.c
+++ b/drivers/staging/tm6000/tm6000-i2c.c
@@ -301,33 +301,11 @@ static u32 functionality(struct i2c_adapter *adap)
 	return I2C_FUNC_SMBUS_EMUL;
 }
 
-#define mass_write(addr, reg, data...)					\
-	{ static const u8 _val[] = data;				\
-	rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR,	\
-	REQ_16_SET_GET_I2C_WR1_RDN, (reg<<8)+addr, 0x00, (u8 *) _val,	\
-	ARRAY_SIZE(_val));						\
-	if (rc < 0) {							\
-		printk(KERN_ERR "Error on line %d: %d\n", __LINE__, rc);	\
-		return rc;						\
-	}								\
-	msleep(10);							\
-	}
-
-static struct i2c_algorithm tm6000_algo = {
+static const struct i2c_algorithm tm6000_algo = {
 	.master_xfer   = tm6000_i2c_xfer,
 	.functionality = functionality,
 };
 
-static struct i2c_adapter tm6000_adap_template = {
-	.owner = THIS_MODULE,
-	.name = "tm6000",
-	.algo = &tm6000_algo,
-};
-
-static struct i2c_client tm6000_client_template = {
-	.name = "tm6000 internal",
-};
-
 /* ----------------------------------------------------------- */
 
 /*
@@ -337,17 +315,20 @@ static struct i2c_client tm6000_client_template = {
 int tm6000_i2c_register(struct tm6000_core *dev)
 {
 	unsigned char eedata[256];
+	int rc;
 
-	dev->i2c_adap = tm6000_adap_template;
+	dev->i2c_adap.owner = THIS_MODULE;
+	dev->i2c_adap.algo = &tm6000_algo;
 	dev->i2c_adap.dev.parent = &dev->udev->dev;
-	strcpy(dev->i2c_adap.name, dev->name);
+	strlcpy(dev->i2c_adap.name, dev->name, sizeof(dev->i2c_adap.name));
 	dev->i2c_adap.algo_data = dev;
-	i2c_add_adapter(&dev->i2c_adap);
+	i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+	rc = i2c_add_adapter(&dev->i2c_adap);
+	if (rc)
+		return rc;
 
-	dev->i2c_client = tm6000_client_template;
 	dev->i2c_client.adapter = &dev->i2c_adap;
-
-	i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev);
+	strlcpy(dev->i2c_client.name, "tm6000 internal", I2C_NAME_SIZE);
 
 	tm6000_i2c_eeprom(dev, eedata, sizeof(eedata));
 
diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c
index 6022caaa739..21e7da40f04 100644
--- a/drivers/staging/tm6000/tm6000-input.c
+++ b/drivers/staging/tm6000/tm6000-input.c
@@ -24,8 +24,7 @@
 #include <linux/input.h>
 #include <linux/usb.h>
 
-#include <media/ir-core.h>
-#include <media/ir-common.h>
+#include <media/rc-core.h>
 
 #include "tm6000.h"
 #include "tm6000-regs.h"
@@ -38,6 +37,10 @@ static unsigned int enable_ir = 1;
 module_param(enable_ir, int, 0644);
 MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)");
 
+/* number of 50ms for ON-OFF-ON power led */
+/* show IR activity */
+#define PWLED_OFF 2
+
 #undef dprintk
 
 #define dprintk(fmt, arg...) \
@@ -51,8 +54,7 @@ struct tm6000_ir_poll_result {
 
 struct tm6000_IR {
 	struct tm6000_core	*dev;
-	struct ir_input_dev	*input;
-	struct ir_input_state	ir;
+	struct rc_dev		*rc;
 	char			name[32];
 	char			phys[32];
 
@@ -61,13 +63,16 @@ struct tm6000_IR {
 	struct delayed_work	work;
 	u8			wait:1;
 	u8			key:1;
+	u8			pwled:1;
+	u8			pwledcnt;
+	u16			key_addr;
 	struct urb		*int_urb;
 	u8			*urb_data;
 
 	int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *);
 
 	/* IR device properties */
-	struct ir_dev_props	props;
+	u64			rc_type;
 };
 
 
@@ -91,26 +96,49 @@ static int tm6000_ir_config(struct tm6000_IR *ir)
 	u8 buf[10];
 	int rc;
 
-	/* hack */
-	buf[0] = 0xff;
-	buf[1] = 0xff;
-	buf[2] = 0xf2;
-	buf[3] = 0x2b;
-	buf[4] = 0x20;
-	buf[5] = 0x35;
-	buf[6] = 0x60;
-	buf[7] = 0x04;
-	buf[8] = 0xc0;
-	buf[9] = 0x08;
-
-	rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
-		USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
-	msleep(100);
-
-	if (rc < 0) {
-		printk(KERN_INFO "IR configuration failed");
-		return rc;
+	switch (ir->rc_type) {
+	case RC_TYPE_NEC:
+		/* Setup IR decoder for NEC standard 12MHz system clock */
+		/* IR_LEADER_CNT = 0.9ms             */
+		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER1, 0xaa);
+		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_LEADER0, 0x30);
+		/* IR_PULSE_CNT = 0.7ms              */
+		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT1, 0x20);
+		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_PULSE_CNT0, 0xd0);
+		/* Remote WAKEUP = enable */
+		tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe);
+		/* IR_WKUP_SEL = Low byte in decoded IR data */
+		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_SEL, 0xff);
+		/* IR_WKU_ADD code */
+		tm6000_set_reg(dev, TM6010_REQ07_RD8_IR_WAKEUP_ADD, 0xff);
+		tm6000_flash_led(dev, 0);
+		msleep(100);
+		tm6000_flash_led(dev, 1);
+		break;
+	default:
+		/* hack */
+		buf[0] = 0xff;
+		buf[1] = 0xff;
+		buf[2] = 0xf2;
+		buf[3] = 0x2b;
+		buf[4] = 0x20;
+		buf[5] = 0x35;
+		buf[6] = 0x60;
+		buf[7] = 0x04;
+		buf[8] = 0xc0;
+		buf[9] = 0x08;
+
+		rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR |
+			USB_RECIP_DEVICE, REQ_00_SET_IR_VALUE, 0, 0, buf, 0x0a);
+		msleep(100);
+
+		if (rc < 0) {
+			printk(KERN_INFO "IR configuration failed");
+			return rc;
+		}
+		break;
 	}
+
 	return 0;
 }
 
@@ -145,17 +173,28 @@ static int default_polling_getkey(struct tm6000_IR *ir,
 		return 0;
 
 	if (&dev->int_in) {
-		if (ir->ir.ir_type == IR_TYPE_RC5)
+		switch (ir->rc_type) {
+		case RC_TYPE_RC5:
 			poll_result->rc_data = ir->urb_data[0];
-		else
-			poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8;
+			break;
+		case RC_TYPE_NEC:
+			if (ir->urb_data[1] == ((ir->key_addr >> 8) & 0xff)) {
+				poll_result->rc_data = ir->urb_data[0]
+							| ir->urb_data[1] << 8;
+			}
+			break;
+		default:
+			poll_result->rc_data = ir->urb_data[0]
+					| ir->urb_data[1] << 8;
+			break;
+		}
 	} else {
 		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0);
 		msleep(10);
 		tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1);
 		msleep(10);
 
-		if (ir->ir.ir_type == IR_TYPE_RC5) {
+		if (ir->rc_type == RC_TYPE_RC5) {
 			rc = tm6000_read_write_usb(dev, USB_DIR_IN |
 				USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 				REQ_02_GET_IR_CODE, 0, 0, buf, 1);
@@ -188,6 +227,7 @@ static int default_polling_getkey(struct tm6000_IR *ir,
 
 static void tm6000_ir_handle_key(struct tm6000_IR *ir)
 {
+	struct tm6000_core *dev = ir->dev;
 	int result;
 	struct tm6000_ir_poll_result poll_result;
 
@@ -200,12 +240,21 @@ static void tm6000_ir_handle_key(struct tm6000_IR *ir)
 
 	dprintk("ir->get_key result data=%04x\n", poll_result.rc_data);
 
-	if (ir->key) {
-		ir_input_keydown(ir->input->input_dev, &ir->ir,
-				(u32)poll_result.rc_data);
+	if (ir->pwled) {
+		if (ir->pwledcnt >= PWLED_OFF) {
+			ir->pwled = 0;
+			ir->pwledcnt = 0;
+			tm6000_flash_led(dev, 1);
+		} else
+			ir->pwledcnt += 1;
+	}
 
-		ir_input_nokey(ir->input->input_dev, &ir->ir);
+	if (ir->key) {
+		rc_keydown(ir->rc, poll_result.rc_data, 0);
 		ir->key = 0;
+		ir->pwled = 1;
+		ir->pwledcnt = 0;
+		tm6000_flash_led(dev, 0);
 	}
 	return;
 }
@@ -218,9 +267,9 @@ static void tm6000_ir_work(struct work_struct *work)
 	schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
 }
 
-static int tm6000_ir_start(void *priv)
+static int tm6000_ir_start(struct rc_dev *rc)
 {
-	struct tm6000_IR *ir = priv;
+	struct tm6000_IR *ir = rc->priv;
 
 	INIT_DELAYED_WORK(&ir->work, tm6000_ir_work);
 	schedule_delayed_work(&ir->work, 0);
@@ -228,30 +277,91 @@ static int tm6000_ir_start(void *priv)
 	return 0;
 }
 
-static void tm6000_ir_stop(void *priv)
+static void tm6000_ir_stop(struct rc_dev *rc)
 {
-	struct tm6000_IR *ir = priv;
+	struct tm6000_IR *ir = rc->priv;
 
 	cancel_delayed_work_sync(&ir->work);
 }
 
-int tm6000_ir_change_protocol(void *priv, u64 ir_type)
+int tm6000_ir_change_protocol(struct rc_dev *rc, u64 rc_type)
 {
-	struct tm6000_IR *ir = priv;
+	struct tm6000_IR *ir = rc->priv;
+
+	if (!ir)
+		return 0;
+
+	if ((rc->rc_map.scan) && (rc_type == RC_TYPE_NEC))
+		ir->key_addr = ((rc->rc_map.scan[0].scancode >> 8) & 0xffff);
 
 	ir->get_key = default_polling_getkey;
+	ir->rc_type = rc_type;
 
 	tm6000_ir_config(ir);
 	/* TODO */
 	return 0;
 }
 
+int tm6000_ir_int_start(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir = dev->ir;
+	int pipe, size;
+	int err = -ENOMEM;
+
+
+	if (!ir)
+		return -ENODEV;
+
+	ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+
+	pipe = usb_rcvintpipe(dev->udev,
+		dev->int_in.endp->desc.bEndpointAddress
+		& USB_ENDPOINT_NUMBER_MASK);
+
+	size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
+	dprintk("IR max size: %d\n", size);
+
+	ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
+	if (ir->int_urb->transfer_buffer == NULL) {
+		usb_free_urb(ir->int_urb);
+		return err;
+	}
+	dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
+	usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
+		ir->int_urb->transfer_buffer, size,
+		tm6000_ir_urb_received, dev,
+		dev->int_in.endp->desc.bInterval);
+	err = usb_submit_urb(ir->int_urb, GFP_KERNEL);
+	if (err) {
+		kfree(ir->int_urb->transfer_buffer);
+		usb_free_urb(ir->int_urb);
+		return err;
+	}
+	ir->urb_data = kzalloc(size, GFP_KERNEL);
+
+	return 0;
+}
+
+void tm6000_ir_int_stop(struct tm6000_core *dev)
+{
+	struct tm6000_IR *ir = dev->ir;
+
+	if (!ir)
+		return;
+
+	usb_kill_urb(ir->int_urb);
+	kfree(ir->int_urb->transfer_buffer);
+	usb_free_urb(ir->int_urb);
+	ir->int_urb = NULL;
+	kfree(ir->urb_data);
+	ir->urb_data = NULL;
+}
+
 int tm6000_ir_init(struct tm6000_core *dev)
 {
 	struct tm6000_IR *ir;
-	struct ir_input_dev *ir_input_dev;
+	struct rc_dev *rc;
 	int err = -ENOMEM;
-	int pipe, size, rc;
 
 	if (!enable_ir)
 		return -ENODEV;
@@ -263,26 +373,27 @@ int tm6000_ir_init(struct tm6000_core *dev)
 		return 0;
 
 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
-	ir_input_dev = kzalloc(sizeof(*ir_input_dev), GFP_KERNEL);
-	ir_input_dev->input_dev = input_allocate_device();
-	if (!ir || !ir_input_dev || !ir_input_dev->input_dev)
-		goto err_out_free;
+	rc = rc_allocate_device();
+	if (!ir | !rc)
+		goto out;
 
 	/* record handles to ourself */
 	ir->dev = dev;
 	dev->ir = ir;
-
-	ir->input = ir_input_dev;
+	ir->rc = rc;
 
 	/* input einrichten */
-	ir->props.allowed_protos = IR_TYPE_RC5 | IR_TYPE_NEC;
-	ir->props.priv = ir;
-	ir->props.change_protocol = tm6000_ir_change_protocol;
-	ir->props.open = tm6000_ir_start;
-	ir->props.close = tm6000_ir_stop;
-	ir->props.driver_type = RC_DRIVER_SCANCODE;
+	rc->allowed_protos = RC_TYPE_RC5 | RC_TYPE_NEC;
+	rc->priv = ir;
+	rc->change_protocol = tm6000_ir_change_protocol;
+	rc->open = tm6000_ir_start;
+	rc->close = tm6000_ir_stop;
+	rc->driver_type = RC_DRIVER_SCANCODE;
 
 	ir->polling = 50;
+	ir->pwled = 0;
+	ir->pwledcnt = 0;
+
 
 	snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)",
 						dev->name);
@@ -290,64 +401,37 @@ int tm6000_ir_init(struct tm6000_core *dev)
 	usb_make_path(dev->udev, ir->phys, sizeof(ir->phys));
 	strlcat(ir->phys, "/input0", sizeof(ir->phys));
 
-	tm6000_ir_change_protocol(ir, IR_TYPE_UNKNOWN);
-	err = ir_input_init(ir_input_dev->input_dev, &ir->ir, IR_TYPE_OTHER);
-	if (err < 0)
-		goto err_out_free;
-
-	ir_input_dev->input_dev->name = ir->name;
-	ir_input_dev->input_dev->phys = ir->phys;
-	ir_input_dev->input_dev->id.bustype = BUS_USB;
-	ir_input_dev->input_dev->id.version = 1;
-	ir_input_dev->input_dev->id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
-	ir_input_dev->input_dev->id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+	tm6000_ir_change_protocol(rc, RC_TYPE_UNKNOWN);
 
-	ir_input_dev->input_dev->dev.parent = &dev->udev->dev;
+	rc->input_name = ir->name;
+	rc->input_phys = ir->phys;
+	rc->input_id.bustype = BUS_USB;
+	rc->input_id.version = 1;
+	rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
+	rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct);
+	rc->map_name = dev->ir_codes;
+	rc->driver_name = "tm6000";
+	rc->dev.parent = &dev->udev->dev;
 
 	if (&dev->int_in) {
 		dprintk("IR over int\n");
 
-		ir->int_urb = usb_alloc_urb(0, GFP_KERNEL);
+		err = tm6000_ir_int_start(dev);
 
-		pipe = usb_rcvintpipe(dev->udev,
-			dev->int_in.endp->desc.bEndpointAddress
-			& USB_ENDPOINT_NUMBER_MASK);
-
-		size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe));
-		dprintk("IR max size: %d\n", size);
-
-		ir->int_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
-		if (ir->int_urb->transfer_buffer == NULL) {
-			usb_free_urb(ir->int_urb);
-			goto err_out_stop;
-		}
-		dprintk("int interval: %d\n", dev->int_in.endp->desc.bInterval);
-		usb_fill_int_urb(ir->int_urb, dev->udev, pipe,
-			ir->int_urb->transfer_buffer, size,
-			tm6000_ir_urb_received, dev,
-			dev->int_in.endp->desc.bInterval);
-		rc = usb_submit_urb(ir->int_urb, GFP_KERNEL);
-		if (rc) {
-			kfree(ir->int_urb->transfer_buffer);
-			usb_free_urb(ir->int_urb);
-			err = rc;
-			goto err_out_stop;
-		}
-		ir->urb_data = kzalloc(size, GFP_KERNEL);
+		if (err)
+			goto out;
 	}
 
 	/* ir register */
-	err = ir_input_register(ir->input->input_dev, dev->ir_codes,
-		&ir->props, "tm6000");
+	err = rc_register_device(rc);
 	if (err)
-		goto err_out_stop;
+		goto out;
 
 	return 0;
 
-err_out_stop:
+out:
 	dev->ir = NULL;
-err_out_free:
-	kfree(ir_input_dev);
+	rc_free_device(rc);
 	kfree(ir);
 	return err;
 }
@@ -361,19 +445,12 @@ int tm6000_ir_fini(struct tm6000_core *dev)
 	if (!ir)
 		return 0;
 
-	ir_input_unregister(ir->input->input_dev);
+	rc_unregister_device(ir->rc);
 
 	if (ir->int_urb) {
-		usb_kill_urb(ir->int_urb);
-		kfree(ir->int_urb->transfer_buffer);
-		usb_free_urb(ir->int_urb);
-		ir->int_urb = NULL;
-		kfree(ir->urb_data);
-		ir->urb_data = NULL;
+		tm6000_ir_int_stop(dev);
 	}
 
-	kfree(ir->input);
-	ir->input = NULL;
 	kfree(ir);
 	dev->ir = NULL;
 
diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c
index 9ec82796634..8fe017c3721 100644
--- a/drivers/staging/tm6000/tm6000-video.c
+++ b/drivers/staging/tm6000/tm6000-video.c
@@ -545,11 +545,16 @@ static int tm6000_prepare_isoc(struct tm6000_core *dev, unsigned int framesize)
 
 	/* De-allocates all pending stuff */
 	tm6000_uninit_isoc(dev);
+	/* Stop interrupt USB pipe */
+	tm6000_ir_int_stop(dev);
 
 	usb_set_interface(dev->udev,
 			  dev->isoc_in.bInterfaceNumber,
 			  dev->isoc_in.bAlternateSetting);
 
+	/* Start interrupt USB pipe */
+	tm6000_ir_int_start(dev);
+
 	pipe = usb_rcvisocpipe(dev->udev,
 			       dev->isoc_in.endp->desc.bEndpointAddress &
 			       USB_ENDPOINT_NUMBER_MASK);
@@ -986,15 +991,6 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p)
 				file->f_flags & O_NONBLOCK);
 }
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-static int vidiocgmbuf(struct file *file, void *priv, struct video_mbuf *mbuf)
-{
-	struct tm6000_fh  *fh = priv;
-
-	return videobuf_cgmbuf(&fh->vb_vidq, mbuf, 8);
-}
-#endif
-
 static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i)
 {
 	struct tm6000_fh  *fh = priv;
@@ -1032,6 +1028,7 @@ static int vidioc_s_std (struct file *file, void *priv, v4l2_std_id *norm)
 	struct tm6000_fh   *fh=priv;
 	struct tm6000_core *dev = fh->dev;
 
+	dev->norm = *norm;
 	rc = tm6000_init_analog_mode(dev);
 
 	fh->width  = dev->width;
@@ -1437,9 +1434,6 @@ static const struct v4l2_ioctl_ops video_ioctl_ops = {
 	.vidioc_querybuf          = vidioc_querybuf,
 	.vidioc_qbuf              = vidioc_qbuf,
 	.vidioc_dqbuf             = vidioc_dqbuf,
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-	.vidiocgmbuf              = vidiocgmbuf,
-#endif
 };
 
 static struct video_device tm6000_template = {
diff --git a/drivers/staging/tm6000/tm6000.h b/drivers/staging/tm6000/tm6000.h
index 46017b60319..bf11eeec92c 100644
--- a/drivers/staging/tm6000/tm6000.h
+++ b/drivers/staging/tm6000/tm6000.h
@@ -266,6 +266,7 @@ struct tm6000_fh {
 int tm6000_tuner_callback(void *ptr, int component, int command, int arg);
 int tm6000_xc5000_callback(void *ptr, int component, int command, int arg);
 int tm6000_cards_setup(struct tm6000_core *dev);
+void tm6000_flash_led(struct tm6000_core *dev, u8 state);
 
 /* In tm6000-core.c */
 
@@ -332,6 +333,8 @@ int tm6000_queue_init(struct tm6000_core *dev);
 int tm6000_ir_init(struct tm6000_core *dev);
 int tm6000_ir_fini(struct tm6000_core *dev);
 void tm6000_ir_wait(struct tm6000_core *dev, u8 state);
+int tm6000_ir_int_start(struct tm6000_core *dev);
+void tm6000_ir_int_stop(struct tm6000_core *dev);
 
 /* Debug stuff */
 
diff --git a/drivers/staging/udlfb/Kconfig b/drivers/staging/udlfb/Kconfig
deleted file mode 100644
index 65bd5db4ca5..00000000000
--- a/drivers/staging/udlfb/Kconfig
+++ /dev/null
@@ -1,14 +0,0 @@
-config FB_UDL
-	tristate "Displaylink USB Framebuffer support"
-	depends on FB && USB
-	select FB_MODE_HELPERS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	---help---
-	  This is a kernel framebuffer driver for DisplayLink USB devices.
-	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
-	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
-	  To compile as a module, choose M here: the module name is udlfb.
diff --git a/drivers/staging/udlfb/Makefile b/drivers/staging/udlfb/Makefile
deleted file mode 100644
index 30d9e675b10..00000000000
--- a/drivers/staging/udlfb/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_FB_UDL)		+= udlfb.o
diff --git a/drivers/staging/usbvideo/Kconfig b/drivers/staging/usbvideo/Kconfig
new file mode 100644
index 00000000000..566d659e6ff
--- /dev/null
+++ b/drivers/staging/usbvideo/Kconfig
@@ -0,0 +1,15 @@
+config VIDEO_USBVIDEO
+	tristate
+
+config USB_VICAM
+	tristate "USB 3com HomeConnect (aka vicam) support (DEPRECATED)"
+	depends on VIDEO_DEV && VIDEO_V4L2_COMMON && USB
+	select VIDEO_USBVIDEO
+	---help---
+	  Say Y here if you have 3com homeconnect camera (vicam).
+
+	  This driver uses the deprecated V4L1 API and will be removed in
+	  2.6.39, unless someone converts it to the V4L2 API.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vicam.
diff --git a/drivers/staging/usbvideo/Makefile b/drivers/staging/usbvideo/Makefile
new file mode 100644
index 00000000000..3c99a9a2d8d
--- /dev/null
+++ b/drivers/staging/usbvideo/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_VIDEO_USBVIDEO)    += usbvideo.o
+obj-$(CONFIG_USB_VICAM)         += vicam.o
diff --git a/drivers/staging/usbvideo/TODO b/drivers/staging/usbvideo/TODO
new file mode 100644
index 00000000000..3b2c0383628
--- /dev/null
+++ b/drivers/staging/usbvideo/TODO
@@ -0,0 +1,5 @@
+This is an obsolete driver for some old webcams that still use V4L1 API. 
+As V4L1 support is being removed from kernel, if nobody take care on it, 
+the driver will be removed for 2.6.39.
+
+Please send patches to linux-media@vger.kernel.org
diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/staging/usbvideo/usbvideo.c
index f1fcf974496..f1fcf974496 100644
--- a/drivers/media/video/usbvideo/usbvideo.c
+++ b/drivers/staging/usbvideo/usbvideo.c
diff --git a/drivers/media/video/usbvideo/usbvideo.h b/drivers/staging/usbvideo/usbvideo.h
index c66985beb8c..95638a072b1 100644
--- a/drivers/media/video/usbvideo/usbvideo.h
+++ b/drivers/staging/usbvideo/usbvideo.h
@@ -16,7 +16,7 @@
 #ifndef usbvideo_h
 #define	usbvideo_h
 
-#include <linux/videodev.h>
+#include "videodev.h"
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <linux/usb.h>
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/staging/usbvideo/vicam.c
index 5d6fd01f918..ecdb121297c 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/staging/usbvideo/vicam.c
@@ -38,12 +38,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/videodev.h>
+#include "videodev.h"
 #include <linux/usb.h>
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/mutex.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
@@ -483,29 +482,28 @@ vicam_open(struct file *file)
 		return -EINVAL;
 	}
 
-	/* the videodev_lock held above us protects us from
-	 * simultaneous opens...for now. we probably shouldn't
-	 * rely on this fact forever.
+	/* cam_lock/open_count protects us from simultaneous opens
+	 * ... for now. we probably shouldn't rely on this fact forever.
 	 */
 
-	lock_kernel();
+	mutex_lock(&cam->cam_lock);
 	if (cam->open_count > 0) {
 		printk(KERN_INFO
 		       "vicam_open called on already opened camera");
-		unlock_kernel();
+		mutex_unlock(&cam->cam_lock);
 		return -EBUSY;
 	}
 
 	cam->raw_image = kmalloc(VICAM_MAX_READ_SIZE, GFP_KERNEL);
 	if (!cam->raw_image) {
-		unlock_kernel();
+		mutex_unlock(&cam->cam_lock);
 		return -ENOMEM;
 	}
 
 	cam->framebuf = rvmalloc(VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
 	if (!cam->framebuf) {
 		kfree(cam->raw_image);
-		unlock_kernel();
+		mutex_unlock(&cam->cam_lock);
 		return -ENOMEM;
 	}
 
@@ -513,10 +511,17 @@ vicam_open(struct file *file)
 	if (!cam->cntrlbuf) {
 		kfree(cam->raw_image);
 		rvfree(cam->framebuf, VICAM_MAX_FRAME_SIZE * VICAM_FRAMES);
-		unlock_kernel();
+		mutex_unlock(&cam->cam_lock);
 		return -ENOMEM;
 	}
 
+	cam->needsDummyRead = 1;
+	cam->open_count++;
+
+	file->private_data = cam;
+	mutex_unlock(&cam->cam_lock);
+
+
 	// First upload firmware, then turn the camera on
 
 	if (!cam->is_initialized) {
@@ -527,12 +532,6 @@ vicam_open(struct file *file)
 
 	set_camera_power(cam, 1);
 
-	cam->needsDummyRead = 1;
-	cam->open_count++;
-
-	file->private_data = cam;
-	unlock_kernel();
-
 	return 0;
 }
 
diff --git a/drivers/staging/usbvideo/videodev.h b/drivers/staging/usbvideo/videodev.h
new file mode 100644
index 00000000000..f11efbef1c0
--- /dev/null
+++ b/drivers/staging/usbvideo/videodev.h
@@ -0,0 +1,318 @@
+/*
+ *	Video for Linux version 1 - OBSOLETE
+ *
+ *	Header file for v4l1 drivers and applications, for
+ *	Linux kernels 2.2.x or 2.4.x.
+ *
+ *	Provides header for legacy drivers and applications
+ *
+ *	See http://linuxtv.org for more info
+ *
+ */
+#ifndef __LINUX_VIDEODEV_H
+#define __LINUX_VIDEODEV_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+#include <linux/videodev2.h>
+
+#define VID_TYPE_CAPTURE	1	/* Can capture */
+#define VID_TYPE_TUNER		2	/* Can tune */
+#define VID_TYPE_TELETEXT	4	/* Does teletext */
+#define VID_TYPE_OVERLAY	8	/* Overlay onto frame buffer */
+#define VID_TYPE_CHROMAKEY	16	/* Overlay by chromakey */
+#define VID_TYPE_CLIPPING	32	/* Can clip */
+#define VID_TYPE_FRAMERAM	64	/* Uses the frame buffer memory */
+#define VID_TYPE_SCALES		128	/* Scalable */
+#define VID_TYPE_MONOCHROME	256	/* Monochrome only */
+#define VID_TYPE_SUBCAPTURE	512	/* Can capture subareas of the image */
+#define VID_TYPE_MPEG_DECODER	1024	/* Can decode MPEG streams */
+#define VID_TYPE_MPEG_ENCODER	2048	/* Can encode MPEG streams */
+#define VID_TYPE_MJPEG_DECODER	4096	/* Can decode MJPEG streams */
+#define VID_TYPE_MJPEG_ENCODER	8192	/* Can encode MJPEG streams */
+
+struct video_capability
+{
+	char name[32];
+	int type;
+	int channels;	/* Num channels */
+	int audios;	/* Num audio devices */
+	int maxwidth;	/* Supported width */
+	int maxheight;	/* And height */
+	int minwidth;	/* Supported width */
+	int minheight;	/* And height */
+};
+
+
+struct video_channel
+{
+	int channel;
+	char name[32];
+	int tuners;
+	__u32  flags;
+#define VIDEO_VC_TUNER		1	/* Channel has a tuner */
+#define VIDEO_VC_AUDIO		2	/* Channel has audio */
+	__u16  type;
+#define VIDEO_TYPE_TV		1
+#define VIDEO_TYPE_CAMERA	2
+	__u16 norm;			/* Norm set by channel */
+};
+
+struct video_tuner
+{
+	int tuner;
+	char name[32];
+	unsigned long rangelow, rangehigh;	/* Tuner range */
+	__u32 flags;
+#define VIDEO_TUNER_PAL		1
+#define VIDEO_TUNER_NTSC	2
+#define VIDEO_TUNER_SECAM	4
+#define VIDEO_TUNER_LOW		8	/* Uses KHz not MHz */
+#define VIDEO_TUNER_NORM	16	/* Tuner can set norm */
+#define VIDEO_TUNER_STEREO_ON	128	/* Tuner is seeing stereo */
+#define VIDEO_TUNER_RDS_ON      256     /* Tuner is seeing an RDS datastream */
+#define VIDEO_TUNER_MBS_ON      512     /* Tuner is seeing an MBS datastream */
+	__u16 mode;			/* PAL/NTSC/SECAM/OTHER */
+#define VIDEO_MODE_PAL		0
+#define VIDEO_MODE_NTSC		1
+#define VIDEO_MODE_SECAM	2
+#define VIDEO_MODE_AUTO		3
+	__u16 signal;			/* Signal strength 16bit scale */
+};
+
+struct video_picture
+{
+	__u16	brightness;
+	__u16	hue;
+	__u16	colour;
+	__u16	contrast;
+	__u16	whiteness;	/* Black and white only */
+	__u16	depth;		/* Capture depth */
+	__u16   palette;	/* Palette in use */
+#define VIDEO_PALETTE_GREY	1	/* Linear greyscale */
+#define VIDEO_PALETTE_HI240	2	/* High 240 cube (BT848) */
+#define VIDEO_PALETTE_RGB565	3	/* 565 16 bit RGB */
+#define VIDEO_PALETTE_RGB24	4	/* 24bit RGB */
+#define VIDEO_PALETTE_RGB32	5	/* 32bit RGB */
+#define VIDEO_PALETTE_RGB555	6	/* 555 15bit RGB */
+#define VIDEO_PALETTE_YUV422	7	/* YUV422 capture */
+#define VIDEO_PALETTE_YUYV	8
+#define VIDEO_PALETTE_UYVY	9	/* The great thing about standards is ... */
+#define VIDEO_PALETTE_YUV420	10
+#define VIDEO_PALETTE_YUV411	11	/* YUV411 capture */
+#define VIDEO_PALETTE_RAW	12	/* RAW capture (BT848) */
+#define VIDEO_PALETTE_YUV422P	13	/* YUV 4:2:2 Planar */
+#define VIDEO_PALETTE_YUV411P	14	/* YUV 4:1:1 Planar */
+#define VIDEO_PALETTE_YUV420P	15	/* YUV 4:2:0 Planar */
+#define VIDEO_PALETTE_YUV410P	16	/* YUV 4:1:0 Planar */
+#define VIDEO_PALETTE_PLANAR	13	/* start of planar entries */
+#define VIDEO_PALETTE_COMPONENT 7	/* start of component entries */
+};
+
+struct video_audio
+{
+	int	audio;		/* Audio channel */
+	__u16	volume;		/* If settable */
+	__u16	bass, treble;
+	__u32	flags;
+#define VIDEO_AUDIO_MUTE	1
+#define VIDEO_AUDIO_MUTABLE	2
+#define VIDEO_AUDIO_VOLUME	4
+#define VIDEO_AUDIO_BASS	8
+#define VIDEO_AUDIO_TREBLE	16
+#define VIDEO_AUDIO_BALANCE	32
+	char    name[16];
+#define VIDEO_SOUND_MONO	1
+#define VIDEO_SOUND_STEREO	2
+#define VIDEO_SOUND_LANG1	4
+#define VIDEO_SOUND_LANG2	8
+	__u16   mode;
+	__u16	balance;	/* Stereo balance */
+	__u16	step;		/* Step actual volume uses */
+};
+
+struct video_clip
+{
+	__s32	x,y;
+	__s32	width, height;
+	struct	video_clip *next;	/* For user use/driver use only */
+};
+
+struct video_window
+{
+	__u32	x,y;			/* Position of window */
+	__u32	width,height;		/* Its size */
+	__u32	chromakey;
+	__u32	flags;
+	struct	video_clip __user *clips;	/* Set only */
+	int	clipcount;
+#define VIDEO_WINDOW_INTERLACE	1
+#define VIDEO_WINDOW_CHROMAKEY	16	/* Overlay by chromakey */
+#define VIDEO_CLIP_BITMAP	-1
+/* bitmap is 1024x625, a '1' bit represents a clipped pixel */
+#define VIDEO_CLIPMAP_SIZE	(128 * 625)
+};
+
+struct video_capture
+{
+	__u32 	x,y;			/* Offsets into image */
+	__u32	width, height;		/* Area to capture */
+	__u16	decimation;		/* Decimation divider */
+	__u16	flags;			/* Flags for capture */
+#define VIDEO_CAPTURE_ODD		0	/* Temporal */
+#define VIDEO_CAPTURE_EVEN		1
+};
+
+struct video_buffer
+{
+	void	*base;
+	int	height,width;
+	int	depth;
+	int	bytesperline;
+};
+
+struct video_mmap
+{
+	unsigned	int frame;		/* Frame (0 - n) for double buffer */
+	int		height,width;
+	unsigned	int format;		/* should be VIDEO_PALETTE_* */
+};
+
+struct video_key
+{
+	__u8	key[8];
+	__u32	flags;
+};
+
+struct video_mbuf
+{
+	int	size;		/* Total memory to map */
+	int	frames;		/* Frames */
+	int	offsets[VIDEO_MAX_FRAME];
+};
+
+#define 	VIDEO_NO_UNIT	(-1)
+
+struct video_unit
+{
+	int 	video;		/* Video minor */
+	int	vbi;		/* VBI minor */
+	int	radio;		/* Radio minor */
+	int	audio;		/* Audio minor */
+	int	teletext;	/* Teletext minor */
+};
+
+struct vbi_format {
+	__u32	sampling_rate;	/* in Hz */
+	__u32	samples_per_line;
+	__u32	sample_format;	/* VIDEO_PALETTE_RAW only (1 byte) */
+	__s32	start[2];	/* starting line for each frame */
+	__u32	count[2];	/* count of lines for each frame */
+	__u32	flags;
+#define	VBI_UNSYNC	1	/* can distingues between top/bottom field */
+#define	VBI_INTERLACED	2	/* lines are interlaced */
+};
+
+/* video_info is biased towards hardware mpeg encode/decode */
+/* but it could apply generically to any hardware compressor/decompressor */
+struct video_info
+{
+	__u32	frame_count;	/* frames output since decode/encode began */
+	__u32	h_size;		/* current unscaled horizontal size */
+	__u32	v_size;		/* current unscaled veritcal size */
+	__u32	smpte_timecode;	/* current SMPTE timecode (for current GOP) */
+	__u32	picture_type;	/* current picture type */
+	__u32	temporal_reference;	/* current temporal reference */
+	__u8	user_data[256];	/* user data last found in compressed stream */
+	/* user_data[0] contains user data flags, user_data[1] has count */
+};
+
+/* generic structure for setting playback modes */
+struct video_play_mode
+{
+	int	mode;
+	int	p1;
+	int	p2;
+};
+
+/* for loading microcode / fpga programming */
+struct video_code
+{
+	char	loadwhat[16];	/* name or tag of file being passed */
+	int	datasize;
+	__u8	*data;
+};
+
+#define VIDIOCGCAP		_IOR('v',1,struct video_capability)	/* Get capabilities */
+#define VIDIOCGCHAN		_IOWR('v',2,struct video_channel)	/* Get channel info (sources) */
+#define VIDIOCSCHAN		_IOW('v',3,struct video_channel)	/* Set channel 	*/
+#define VIDIOCGTUNER		_IOWR('v',4,struct video_tuner)		/* Get tuner abilities */
+#define VIDIOCSTUNER		_IOW('v',5,struct video_tuner)		/* Tune the tuner for the current channel */
+#define VIDIOCGPICT		_IOR('v',6,struct video_picture)	/* Get picture properties */
+#define VIDIOCSPICT		_IOW('v',7,struct video_picture)	/* Set picture properties */
+#define VIDIOCCAPTURE		_IOW('v',8,int)				/* Start, end capture */
+#define VIDIOCGWIN		_IOR('v',9, struct video_window)	/* Get the video overlay window */
+#define VIDIOCSWIN		_IOW('v',10, struct video_window)	/* Set the video overlay window - passes clip list for hardware smarts , chromakey etc */
+#define VIDIOCGFBUF		_IOR('v',11, struct video_buffer)	/* Get frame buffer */
+#define VIDIOCSFBUF		_IOW('v',12, struct video_buffer)	/* Set frame buffer - root only */
+#define VIDIOCKEY		_IOR('v',13, struct video_key)		/* Video key event - to dev 255 is to all - cuts capture on all DMA windows with this key (0xFFFFFFFF == all) */
+#define VIDIOCGFREQ		_IOR('v',14, unsigned long)		/* Set tuner */
+#define VIDIOCSFREQ		_IOW('v',15, unsigned long)		/* Set tuner */
+#define VIDIOCGAUDIO		_IOR('v',16, struct video_audio)	/* Get audio info */
+#define VIDIOCSAUDIO		_IOW('v',17, struct video_audio)	/* Audio source, mute etc */
+#define VIDIOCSYNC		_IOW('v',18, int)			/* Sync with mmap grabbing */
+#define VIDIOCMCAPTURE		_IOW('v',19, struct video_mmap)		/* Grab frames */
+#define VIDIOCGMBUF		_IOR('v',20, struct video_mbuf)		/* Memory map buffer info */
+#define VIDIOCGUNIT		_IOR('v',21, struct video_unit)		/* Get attached units */
+#define VIDIOCGCAPTURE		_IOR('v',22, struct video_capture)	/* Get subcapture */
+#define VIDIOCSCAPTURE		_IOW('v',23, struct video_capture)	/* Set subcapture */
+#define VIDIOCSPLAYMODE		_IOW('v',24, struct video_play_mode)	/* Set output video mode/feature */
+#define VIDIOCSWRITEMODE	_IOW('v',25, int)			/* Set write mode */
+#define VIDIOCGPLAYINFO		_IOR('v',26, struct video_info)		/* Get current playback info from hardware */
+#define VIDIOCSMICROCODE	_IOW('v',27, struct video_code)		/* Load microcode into hardware */
+#define	VIDIOCGVBIFMT		_IOR('v',28, struct vbi_format)		/* Get VBI information */
+#define	VIDIOCSVBIFMT		_IOW('v',29, struct vbi_format)		/* Set VBI information */
+
+
+#define BASE_VIDIOCPRIVATE	192		/* 192-255 are private */
+
+/* VIDIOCSWRITEMODE */
+#define VID_WRITE_MPEG_AUD		0
+#define VID_WRITE_MPEG_VID		1
+#define VID_WRITE_OSD			2
+#define VID_WRITE_TTX			3
+#define VID_WRITE_CC			4
+#define VID_WRITE_MJPEG			5
+
+/* VIDIOCSPLAYMODE */
+#define VID_PLAY_VID_OUT_MODE		0
+	/* p1: = VIDEO_MODE_PAL, VIDEO_MODE_NTSC, etc ... */
+#define VID_PLAY_GENLOCK		1
+	/* p1: 0 = OFF, 1 = ON */
+	/* p2: GENLOCK FINE DELAY value */
+#define VID_PLAY_NORMAL			2
+#define VID_PLAY_PAUSE			3
+#define VID_PLAY_SINGLE_FRAME		4
+#define VID_PLAY_FAST_FORWARD		5
+#define VID_PLAY_SLOW_MOTION		6
+#define VID_PLAY_IMMEDIATE_NORMAL	7
+#define VID_PLAY_SWITCH_CHANNELS	8
+#define VID_PLAY_FREEZE_FRAME		9
+#define VID_PLAY_STILL_MODE		10
+#define VID_PLAY_MASTER_MODE		11
+	/* p1: see below */
+#define		VID_PLAY_MASTER_NONE	1
+#define		VID_PLAY_MASTER_VIDEO	2
+#define		VID_PLAY_MASTER_AUDIO	3
+#define VID_PLAY_ACTIVE_SCANLINES	12
+	/* p1 = first active; p2 = last active */
+#define VID_PLAY_RESET			13
+#define VID_PLAY_END_MARK		14
+
+#endif /* __LINUX_VIDEODEV_H */
+
+/*
+ * Local variables:
+ * c-basic-offset: 8
+ * End:
+ */
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index e992d5d9e15..7cc3d2407d1 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -1675,13 +1675,14 @@ static int  device_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) {
 
 		{
 			char essid[IW_ESSID_MAX_SIZE+1];
-			if (wrq->u.essid.pointer)
+			if (wrq->u.essid.pointer) {
 				rc = iwctl_giwessid(dev, NULL,
 						    &(wrq->u.essid), essid);
 				if (copy_to_user(wrq->u.essid.pointer,
 						         essid,
 						         wrq->u.essid.length) )
 					rc = -EFAULT;
+			}
 		}
 		break;
 
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasusb.c b/drivers/staging/westbridge/astoria/api/src/cyasusb.c
index 5a219701206..7777d9a60a5 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasusb.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasusb.c
@@ -1417,7 +1417,6 @@ cy_as_usb_set_enum_config(cy_as_device_handle handle,
 	 */
 	bus_mask   = 0;
 	media_mask = 0;
-	media_mask = 0;
 	for (bus = 0; bus < CY_AS_MAX_BUSES; bus++) {
 		for (device = 0; device < CY_AS_MAX_STORAGE_DEVICES; device++) {
 			if (config_p->devices_to_enumerate[bus][device] ==
diff --git a/drivers/staging/winbond/sysdef.h b/drivers/staging/winbond/sysdef.h
index 9195adf98e1..d0d71f69bc8 100644
--- a/drivers/staging/winbond/sysdef.h
+++ b/drivers/staging/winbond/sysdef.h
@@ -2,6 +2,9 @@
 
 #ifndef SYS_DEF_H
 #define SYS_DEF_H
+
+#include <linux/delay.h>
+
 #define WB_LINUX
 #define WB_LINUX_WPA_PSK
 
diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c
index 4af83d5318f..6a71f52c59b 100644
--- a/drivers/staging/wlan-ng/cfg80211.c
+++ b/drivers/staging/wlan-ng/cfg80211.c
@@ -139,7 +139,7 @@ exit:
 }
 
 int prism2_add_key(struct wiphy *wiphy, struct net_device *dev,
-		   u8 key_index, const u8 *mac_addr,
+		   u8 key_index, bool pairwise, const u8 *mac_addr,
 		   struct key_params *params)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
@@ -198,7 +198,7 @@ exit:
 }
 
 int prism2_get_key(struct wiphy *wiphy, struct net_device *dev,
-		   u8 key_index, const u8 *mac_addr, void *cookie,
+		   u8 key_index, bool pairwise, const u8 *mac_addr, void *cookie,
 		   void (*callback)(void *cookie, struct key_params*))
 {
 	wlandevice_t *wlandev = dev->ml_priv;
@@ -227,7 +227,7 @@ int prism2_get_key(struct wiphy *wiphy, struct net_device *dev,
 }
 
 int prism2_del_key(struct wiphy *wiphy, struct net_device *dev,
-		   u8 key_index, const u8 *mac_addr)
+		   u8 key_index, bool pairwise, const u8 *mac_addr)
 {
 	wlandevice_t *wlandev = dev->ml_priv;
 	u32 did;
diff --git a/drivers/staging/wlan-ng/p80211netdev.c b/drivers/staging/wlan-ng/p80211netdev.c
index aa1792c8429..b7b4a733b46 100644
--- a/drivers/staging/wlan-ng/p80211netdev.c
+++ b/drivers/staging/wlan-ng/p80211netdev.c
@@ -522,8 +522,8 @@ static int p80211netdev_ethtool(wlandevice_t *wlandev, void __user *useraddr)
 		if (copy_to_user(useraddr, &edata, sizeof(edata)))
 			return -EFAULT;
 		return 0;
-	}
 #endif
+	}
 
 	return -EOPNOTSUPP;
 }
diff --git a/drivers/staging/zram/zram_drv.c b/drivers/staging/zram/zram_drv.c
index 8c3c057aa84..d0e9e020753 100644
--- a/drivers/staging/zram/zram_drv.c
+++ b/drivers/staging/zram/zram_drv.c
@@ -435,12 +435,6 @@ static int zram_make_request(struct request_queue *queue, struct bio *bio)
 	int ret = 0;
 	struct zram *zram = queue->queuedata;
 
-	if (unlikely(!zram->init_done)) {
-		set_bit(BIO_UPTODATE, &bio->bi_flags);
-		bio_endio(bio, 0);
-		return 0;
-	}
-
 	if (!valid_io_request(zram, bio)) {
 		zram_stat64_inc(zram, &zram->stats.invalid_io);
 		bio_io_error(bio);
diff --git a/drivers/staging/zram/zram_sysfs.c b/drivers/staging/zram/zram_sysfs.c
index 6c574a994d1..6b3cf00b0ff 100644
--- a/drivers/staging/zram/zram_sysfs.c
+++ b/drivers/staging/zram/zram_sysfs.c
@@ -189,10 +189,10 @@ static ssize_t mem_used_total_show(struct device *dev,
 	return sprintf(buf, "%llu\n", val);
 }
 
-static DEVICE_ATTR(disksize, S_IRUGO | S_IWUGO,
+static DEVICE_ATTR(disksize, S_IRUGO | S_IWUSR,
 		disksize_show, disksize_store);
 static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL);
-static DEVICE_ATTR(reset, S_IWUGO, NULL, reset_store);
+static DEVICE_ATTR(reset, S_IWUSR, NULL, reset_store);
 static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL);
 static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL);
 static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL);
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 04ef3ef0a42..44b8412a04e 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -19,7 +19,7 @@
  *
  * TO DO:
  *	Mostly done:	ioctls for setting modes/timing
- *	Partly done: 	hooks so you can pull off frames to non tty devs
+ *	Partly done:	hooks so you can pull off frames to non tty devs
  *	Restart DLCI 0 when it closes ?
  *	Test basic encoding
  *	Improve the tx engine
@@ -73,8 +73,10 @@ module_param(debug, int, 0600);
 #define T2	(2 * HZ)
 #endif
 
-/* Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
-   limits so this is plenty */
+/*
+ * Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
+ * limits so this is plenty
+ */
 #define MAX_MRU 512
 #define MAX_MTU 512
 
@@ -184,6 +186,9 @@ struct gsm_mux {
 #define GSM_DATA		5
 #define GSM_FCS			6
 #define GSM_OVERRUN		7
+#define GSM_LEN0		8
+#define GSM_LEN1		9
+#define GSM_SSOF		10
 	unsigned int len;
 	unsigned int address;
 	unsigned int count;
@@ -191,6 +196,7 @@ struct gsm_mux {
 	int encoding;
 	u8 control;
 	u8 fcs;
+	u8 received_fcs;
 	u8 *txframe;			/* TX framing buffer */
 
 	/* Methods for the receiver side */
@@ -286,7 +292,7 @@ static spinlock_t gsm_mux_lock;
 #define MDM_DV			0x40
 
 #define GSM0_SOF		0xF9
-#define GSM1_SOF 		0x7E
+#define GSM1_SOF		0x7E
 #define GSM1_ESCAPE		0x7D
 #define GSM1_ESCAPE_BITS	0x20
 #define XON			0x11
@@ -429,61 +435,63 @@ static void gsm_print_packet(const char *hdr, int addr, int cr,
 	if (!(debug & 1))
 		return;
 
-	printk(KERN_INFO "%s %d) %c: ", hdr, addr, "RC"[cr]);
+	pr_info("%s %d) %c: ", hdr, addr, "RC"[cr]);
 
 	switch (control & ~PF) {
 	case SABM:
-		printk(KERN_CONT "SABM");
+		pr_cont("SABM");
 		break;
 	case UA:
-		printk(KERN_CONT "UA");
+		pr_cont("UA");
 		break;
 	case DISC:
-		printk(KERN_CONT "DISC");
+		pr_cont("DISC");
 		break;
 	case DM:
-		printk(KERN_CONT "DM");
+		pr_cont("DM");
 		break;
 	case UI:
-		printk(KERN_CONT "UI");
+		pr_cont("UI");
 		break;
 	case UIH:
-		printk(KERN_CONT "UIH");
+		pr_cont("UIH");
 		break;
 	default:
 		if (!(control & 0x01)) {
-			printk(KERN_CONT "I N(S)%d N(R)%d",
-				(control & 0x0E) >> 1, (control & 0xE)>> 5);
+			pr_cont("I N(S)%d N(R)%d",
+				(control & 0x0E) >> 1, (control & 0xE) >> 5);
 		} else switch (control & 0x0F) {
-		case RR:
-			printk("RR(%d)", (control & 0xE0) >> 5);
-			break;
-		case RNR:
-			printk("RNR(%d)", (control & 0xE0) >> 5);
-			break;
-		case REJ:
-			printk("REJ(%d)", (control & 0xE0) >> 5);
-			break;
-		default:
-			printk(KERN_CONT "[%02X]", control);
+			case RR:
+				pr_cont("RR(%d)", (control & 0xE0) >> 5);
+				break;
+			case RNR:
+				pr_cont("RNR(%d)", (control & 0xE0) >> 5);
+				break;
+			case REJ:
+				pr_cont("REJ(%d)", (control & 0xE0) >> 5);
+				break;
+			default:
+				pr_cont("[%02X]", control);
 		}
 	}
 
 	if (control & PF)
-		printk(KERN_CONT "(P)");
+		pr_cont("(P)");
 	else
-		printk(KERN_CONT "(F)");
+		pr_cont("(F)");
 
 	if (dlen) {
 		int ct = 0;
 		while (dlen--) {
-			if (ct % 8 == 0)
-				printk(KERN_CONT "\n    ");
-			printk(KERN_CONT "%02X ", *data++);
+			if (ct % 8 == 0) {
+				pr_cont("\n");
+				pr_debug("    ");
+			}
+			pr_cont("%02X ", *data++);
 			ct++;
 		}
 	}
-	printk(KERN_CONT "\n");
+	pr_cont("\n");
 }
 
 
@@ -522,11 +530,13 @@ static void hex_packet(const unsigned char *p, int len)
 {
 	int i;
 	for (i = 0; i < len; i++) {
-		if (i && (i % 16) == 0)
-			printk("\n");
-		printk("%02X ", *p++);
+		if (i && (i % 16) == 0) {
+			pr_cont("\n");
+			pr_debug("");
+		}
+		pr_cont("%02X ", *p++);
 	}
-	printk("\n");
+	pr_cont("\n");
 }
 
 /**
@@ -676,7 +686,7 @@ static void gsm_data_kick(struct gsm_mux *gsm)
 		}
 
 		if (debug & 4) {
-			printk("gsm_data_kick: \n");
+			pr_debug("gsm_data_kick:\n");
 			hex_packet(gsm->txframe, len);
 		}
 
@@ -716,8 +726,8 @@ static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
 		if (msg->len < 128)
 			*--dp = (msg->len << 1) | EA;
 		else {
-			*--dp = (msg->len >> 6) | EA;
-			*--dp = (msg->len & 127) << 1;
+			*--dp = (msg->len >> 7);	/* bits 7 - 15 */
+			*--dp = (msg->len & 127) << 1;	/* bits 0 - 6 */
 		}
 	}
 
@@ -968,6 +978,8 @@ static void gsm_control_reply(struct gsm_mux *gsm, int cmd, u8 *data,
 {
 	struct gsm_msg *msg;
 	msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->ftype);
+	if (msg == NULL)
+		return;
 	msg->data[0] = (cmd & 0xFE) << 1 | EA;	/* Clear C/R */
 	msg->data[1] = (dlen << 1) | EA;
 	memcpy(msg->data + 2, data, dlen);
@@ -1229,7 +1241,7 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
 }
 
 /**
- *	gsm_control_transmit 	-	send control packet
+ *	gsm_control_transmit	-	send control packet
  *	@gsm: gsm mux
  *	@ctrl: frame to send
  *
@@ -1359,7 +1371,7 @@ static void gsm_dlci_close(struct gsm_dlci *dlci)
 {
 	del_timer(&dlci->t1);
 	if (debug & 8)
-		printk("DLCI %d goes closed.\n", dlci->addr);
+		pr_debug("DLCI %d goes closed.\n", dlci->addr);
 	dlci->state = DLCI_CLOSED;
 	if (dlci->addr != 0) {
 		struct tty_struct  *tty = tty_port_tty_get(&dlci->port);
@@ -1390,7 +1402,7 @@ static void gsm_dlci_open(struct gsm_dlci *dlci)
 	/* This will let a tty open continue */
 	dlci->state = DLCI_OPEN;
 	if (debug & 8)
-		printk("DLCI %d goes open.\n", dlci->addr);
+		pr_debug("DLCI %d goes open.\n", dlci->addr);
 	wake_up(&dlci->gsm->event);
 }
 
@@ -1492,29 +1504,29 @@ static void gsm_dlci_data(struct gsm_dlci *dlci, u8 *data, int len)
 	unsigned int modem = 0;
 
 	if (debug & 16)
-		printk("%d bytes for tty %p\n", len, tty);
+		pr_debug("%d bytes for tty %p\n", len, tty);
 	if (tty) {
 		switch (dlci->adaption)  {
-			/* Unsupported types */
-			/* Packetised interruptible data */
-			case 4:
-				break;
-			/* Packetised uininterruptible voice/data */
-			case 3:
-				break;
-			/* Asynchronous serial with line state in each frame */
-			case 2:
-				while (gsm_read_ea(&modem, *data++) == 0) {
-					len--;
-					if (len == 0)
-						return;
-				}
-				gsm_process_modem(tty, dlci, modem);
-			/* Line state will go via DLCI 0 controls only */
-			case 1:
-			default:
-				tty_insert_flip_string(tty, data, len);
-				tty_flip_buffer_push(tty);
+		/* Unsupported types */
+		/* Packetised interruptible data */
+		case 4:
+			break;
+		/* Packetised uininterruptible voice/data */
+		case 3:
+			break;
+		/* Asynchronous serial with line state in each frame */
+		case 2:
+			while (gsm_read_ea(&modem, *data++) == 0) {
+				len--;
+				if (len == 0)
+					return;
+			}
+			gsm_process_modem(tty, dlci, modem);
+		/* Line state will go via DLCI 0 controls only */
+		case 1:
+		default:
+			tty_insert_flip_string(tty, data, len);
+			tty_flip_buffer_push(tty);
 		}
 		tty_kref_put(tty);
 	}
@@ -1623,7 +1635,6 @@ static void gsm_dlci_free(struct gsm_dlci *dlci)
 	kfree(dlci);
 }
 
-
 /*
  *	LAPBish link layer logic
  */
@@ -1648,10 +1659,12 @@ static void gsm_queue(struct gsm_mux *gsm)
 
 	if ((gsm->control & ~PF) == UI)
 		gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf, gsm->len);
+	/* generate final CRC with received FCS */
+	gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->received_fcs);
 	if (gsm->fcs != GOOD_FCS) {
 		gsm->bad_fcs++;
 		if (debug & 4)
-			printk("BAD FCS %02x\n", gsm->fcs);
+			pr_debug("BAD FCS %02x\n", gsm->fcs);
 		return;
 	}
 	address = gsm->address >> 1;
@@ -1746,6 +1759,8 @@ invalid:
 
 static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
 {
+	unsigned int len;
+
 	switch (gsm->state) {
 	case GSM_SEARCH:	/* SOF marker */
 		if (c == GSM0_SOF) {
@@ -1754,8 +1769,8 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
 			gsm->len = 0;
 			gsm->fcs = INIT_FCS;
 		}
-		break;		/* Address EA */
-	case GSM_ADDRESS:
+		break;
+	case GSM_ADDRESS:	/* Address EA */
 		gsm->fcs = gsm_fcs_add(gsm->fcs, c);
 		if (gsm_read_ea(&gsm->address, c))
 			gsm->state = GSM_CONTROL;
@@ -1763,9 +1778,9 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
 	case GSM_CONTROL:	/* Control Byte */
 		gsm->fcs = gsm_fcs_add(gsm->fcs, c);
 		gsm->control = c;
-		gsm->state = GSM_LEN;
+		gsm->state = GSM_LEN0;
 		break;
-	case GSM_LEN:		/* Length EA */
+	case GSM_LEN0:		/* Length EA */
 		gsm->fcs = gsm_fcs_add(gsm->fcs, c);
 		if (gsm_read_ea(&gsm->len, c)) {
 			if (gsm->len > gsm->mru) {
@@ -1774,8 +1789,28 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
 				break;
 			}
 			gsm->count = 0;
-			gsm->state = GSM_DATA;
+			if (!gsm->len)
+				gsm->state = GSM_FCS;
+			else
+				gsm->state = GSM_DATA;
+			break;
+		}
+		gsm->state = GSM_LEN1;
+		break;
+	case GSM_LEN1:
+		gsm->fcs = gsm_fcs_add(gsm->fcs, c);
+		len = c;
+		gsm->len |= len << 7;
+		if (gsm->len > gsm->mru) {
+			gsm->bad_size++;
+			gsm->state = GSM_SEARCH;
+			break;
 		}
+		gsm->count = 0;
+		if (!gsm->len)
+			gsm->state = GSM_FCS;
+		else
+			gsm->state = GSM_DATA;
 		break;
 	case GSM_DATA:		/* Data */
 		gsm->buf[gsm->count++] = c;
@@ -1783,16 +1818,25 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
 			gsm->state = GSM_FCS;
 		break;
 	case GSM_FCS:		/* FCS follows the packet */
-		gsm->fcs = c;
+		gsm->received_fcs = c;
+		if (c == GSM0_SOF) {
+			gsm->state = GSM_SEARCH;
+			break;
+		}
 		gsm_queue(gsm);
-		/* And then back for the next frame */
-		gsm->state = GSM_SEARCH;
+		gsm->state = GSM_SSOF;
+		break;
+	case GSM_SSOF:
+		if (c == GSM0_SOF) {
+			gsm->state = GSM_SEARCH;
+			break;
+		}
 		break;
 	}
 }
 
 /**
- *	gsm0_receive	-	perform processing for non-transparency
+ *	gsm1_receive	-	perform processing for non-transparency
  *	@gsm: gsm data for this ldisc instance
  *	@c: character
  *
@@ -1854,7 +1898,7 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
 		gsm->state = GSM_DATA;
 		break;
 	case GSM_DATA:		/* Data */
-		if (gsm->count > gsm->mru ) {	/* Allow one for the FCS */
+		if (gsm->count > gsm->mru) {	/* Allow one for the FCS */
 			gsm->state = GSM_OVERRUN;
 			gsm->bad_size++;
 		} else
@@ -2032,9 +2076,6 @@ struct gsm_mux *gsm_alloc_mux(void)
 }
 EXPORT_SYMBOL_GPL(gsm_alloc_mux);
 
-
-
-
 /**
  *	gsmld_output		-	write to link
  *	@gsm: our mux
@@ -2052,7 +2093,7 @@ static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
 		return -ENOSPC;
 	}
 	if (debug & 4) {
-		printk("-->%d bytes out\n", len);
+		pr_debug("-->%d bytes out\n", len);
 		hex_packet(data, len);
 	}
 	gsm->tty->ops->write(gsm->tty, data, len);
@@ -2109,7 +2150,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 	char flags;
 
 	if (debug & 4) {
-		printk("Inbytes %dd\n", count);
+		pr_debug("Inbytes %dd\n", count);
 		hex_packet(cp, count);
 	}
 
@@ -2126,7 +2167,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
 			gsm->error(gsm, *dp, flags);
 			break;
 		default:
-			printk(KERN_ERR "%s: unknown flag %d\n",
+			WARN_ONCE("%s: unknown flag %d\n",
 			       tty_name(tty, buf), flags);
 			break;
 		}
@@ -2321,7 +2362,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
 	int need_restart = 0;
 
 	/* Stuff we don't support yet - UI or I frame transport, windowing */
-	if ((c->adaption !=1 && c->adaption != 2) || c->k)
+	if ((c->adaption != 1 && c->adaption != 2) || c->k)
 		return -EOPNOTSUPP;
 	/* Check the MRU/MTU range looks sane */
 	if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
@@ -2375,6 +2416,7 @@ static int gsmld_config(struct tty_struct *tty, struct gsm_mux *gsm,
 	gsm->mru = c->mru;
 	gsm->encoding = c->encapsulation;
 	gsm->adaption = c->adaption;
+	gsm->n2 = c->n2;
 
 	if (c->i == 1)
 		gsm->ftype = UIH;
@@ -2415,7 +2457,7 @@ static int gsmld_ioctl(struct tty_struct *tty, struct file *file,
 			c.i = 1;
 		else
 			c.i = 2;
-		printk("Ftype %d i %d\n", gsm->ftype, c.i);
+		pr_debug("Ftype %d i %d\n", gsm->ftype, c.i);
 		c.mru = gsm->mru;
 		c.mtu = gsm->mtu;
 		c.k = 0;
@@ -2709,14 +2751,15 @@ static int __init gsm_init(void)
 	/* Fill in our line protocol discipline, and register it */
 	int status = tty_register_ldisc(N_GSM0710, &tty_ldisc_packet);
 	if (status != 0) {
-		printk(KERN_ERR "n_gsm: can't register line discipline (err = %d)\n", status);
+		pr_err("n_gsm: can't register line discipline (err = %d)\n",
+								status);
 		return status;
 	}
 
 	gsm_tty_driver = alloc_tty_driver(256);
 	if (!gsm_tty_driver) {
 		tty_unregister_ldisc(N_GSM0710);
-		printk(KERN_ERR "gsm_init: tty allocation failed.\n");
+		pr_err("gsm_init: tty allocation failed.\n");
 		return -EINVAL;
 	}
 	gsm_tty_driver->owner	= THIS_MODULE;
@@ -2727,7 +2770,7 @@ static int __init gsm_init(void)
 	gsm_tty_driver->type		= TTY_DRIVER_TYPE_SERIAL;
 	gsm_tty_driver->subtype	= SERIAL_TYPE_NORMAL;
 	gsm_tty_driver->flags	= TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV
-							| TTY_DRIVER_HARDWARE_BREAK;
+						| TTY_DRIVER_HARDWARE_BREAK;
 	gsm_tty_driver->init_termios	= tty_std_termios;
 	/* Fixme */
 	gsm_tty_driver->init_termios.c_lflag &= ~ECHO;
@@ -2738,10 +2781,11 @@ static int __init gsm_init(void)
 	if (tty_register_driver(gsm_tty_driver)) {
 		put_tty_driver(gsm_tty_driver);
 		tty_unregister_ldisc(N_GSM0710);
-		printk(KERN_ERR "gsm_init: tty registration failed.\n");
+		pr_err("gsm_init: tty registration failed.\n");
 		return -EBUSY;
 	}
-	printk(KERN_INFO "gsm_init: loaded as %d,%d.\n", gsm_tty_driver->major, gsm_tty_driver->minor_start);
+	pr_debug("gsm_init: loaded as %d,%d.\n",
+			gsm_tty_driver->major, gsm_tty_driver->minor_start);
 	return 0;
 }
 
@@ -2749,10 +2793,10 @@ static void __exit gsm_exit(void)
 {
 	int status = tty_unregister_ldisc(N_GSM0710);
 	if (status != 0)
-		printk(KERN_ERR "n_gsm: can't unregister line discipline (err = %d)\n", status);
+		pr_err("n_gsm: can't unregister line discipline (err = %d)\n",
+								status);
 	tty_unregister_driver(gsm_tty_driver);
 	put_tty_driver(gsm_tty_driver);
-	printk(KERN_INFO "gsm_init: unloaded.\n");
 }
 
 module_init(gsm_init);
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index eaa5d3efa79..c556ed9db13 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -554,7 +554,7 @@ EXPORT_SYMBOL(handle_sysrq);
 #ifdef CONFIG_INPUT
 
 /* Simple translation table for the SysRq keys */
-static const unsigned char sysrq_xlate[KEY_MAX + 1] =
+static const unsigned char sysrq_xlate[KEY_CNT] =
         "\000\0331234567890-=\177\t"                    /* 0x00 - 0x0f */
         "qwertyuiop[]\r\000as"                          /* 0x10 - 0x1f */
         "dfghjkl;'`\000\\zxcv"                          /* 0x20 - 0x2f */
@@ -563,53 +563,129 @@ static const unsigned char sysrq_xlate[KEY_MAX + 1] =
         "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
         "\r\000/";                                      /* 0x60 - 0x6f */
 
-static bool sysrq_down;
-static int sysrq_alt_use;
-static int sysrq_alt;
-static DEFINE_SPINLOCK(sysrq_event_lock);
+struct sysrq_state {
+	struct input_handle handle;
+	struct work_struct reinject_work;
+	unsigned long key_down[BITS_TO_LONGS(KEY_CNT)];
+	unsigned int alt;
+	unsigned int alt_use;
+	bool active;
+	bool need_reinject;
+};
+
+static void sysrq_reinject_alt_sysrq(struct work_struct *work)
+{
+	struct sysrq_state *sysrq =
+			container_of(work, struct sysrq_state, reinject_work);
+	struct input_handle *handle = &sysrq->handle;
+	unsigned int alt_code = sysrq->alt_use;
+
+	if (sysrq->need_reinject) {
+		/* Simulate press and release of Alt + SysRq */
+		input_inject_event(handle, EV_KEY, alt_code, 1);
+		input_inject_event(handle, EV_KEY, KEY_SYSRQ, 1);
+		input_inject_event(handle, EV_SYN, SYN_REPORT, 1);
+
+		input_inject_event(handle, EV_KEY, KEY_SYSRQ, 0);
+		input_inject_event(handle, EV_KEY, alt_code, 0);
+		input_inject_event(handle, EV_SYN, SYN_REPORT, 1);
+	}
+}
 
-static bool sysrq_filter(struct input_handle *handle, unsigned int type,
-		         unsigned int code, int value)
+static bool sysrq_filter(struct input_handle *handle,
+			 unsigned int type, unsigned int code, int value)
 {
+	struct sysrq_state *sysrq = handle->private;
+	bool was_active = sysrq->active;
 	bool suppress;
 
-	/* We are called with interrupts disabled, just take the lock */
-	spin_lock(&sysrq_event_lock);
+	switch (type) {
 
-	if (type != EV_KEY)
-		goto out;
+	case EV_SYN:
+		suppress = false;
+		break;
 
-	switch (code) {
+	case EV_KEY:
+		switch (code) {
 
-	case KEY_LEFTALT:
-	case KEY_RIGHTALT:
-		if (value)
-			sysrq_alt = code;
-		else {
-			if (sysrq_down && code == sysrq_alt_use)
-				sysrq_down = false;
+		case KEY_LEFTALT:
+		case KEY_RIGHTALT:
+			if (!value) {
+				/* One of ALTs is being released */
+				if (sysrq->active && code == sysrq->alt_use)
+					sysrq->active = false;
 
-			sysrq_alt = 0;
+				sysrq->alt = KEY_RESERVED;
+
+			} else if (value != 2) {
+				sysrq->alt = code;
+				sysrq->need_reinject = false;
+			}
+			break;
+
+		case KEY_SYSRQ:
+			if (value == 1 && sysrq->alt != KEY_RESERVED) {
+				sysrq->active = true;
+				sysrq->alt_use = sysrq->alt;
+				/*
+				 * If nothing else will be pressed we'll need
+				 * to * re-inject Alt-SysRq keysroke.
+				 */
+				sysrq->need_reinject = true;
+			}
+
+			/*
+			 * Pretend that sysrq was never pressed at all. This
+			 * is needed to properly handle KGDB which will try
+			 * to release all keys after exiting debugger. If we
+			 * do not clear key bit it KGDB will end up sending
+			 * release events for Alt and SysRq, potentially
+			 * triggering print screen function.
+			 */
+			if (sysrq->active)
+				clear_bit(KEY_SYSRQ, handle->dev->key);
+
+			break;
+
+		default:
+			if (sysrq->active && value && value != 2) {
+				sysrq->need_reinject = false;
+				__handle_sysrq(sysrq_xlate[code], true);
+			}
+			break;
 		}
-		break;
 
-	case KEY_SYSRQ:
-		if (value == 1 && sysrq_alt) {
-			sysrq_down = true;
-			sysrq_alt_use = sysrq_alt;
+		suppress = sysrq->active;
+
+		if (!sysrq->active) {
+			/*
+			 * If we are not suppressing key presses keep track of
+			 * keyboard state so we can release keys that have been
+			 * pressed before entering SysRq mode.
+			 */
+			if (value)
+				set_bit(code, sysrq->key_down);
+			else
+				clear_bit(code, sysrq->key_down);
+
+			if (was_active)
+				schedule_work(&sysrq->reinject_work);
+
+		} else if (value == 0 &&
+			   test_and_clear_bit(code, sysrq->key_down)) {
+			/*
+			 * Pass on release events for keys that was pressed before
+			 * entering SysRq mode.
+			 */
+			suppress = false;
 		}
 		break;
 
 	default:
-		if (sysrq_down && value && value != 2)
-			__handle_sysrq(sysrq_xlate[code], true);
+		suppress = sysrq->active;
 		break;
 	}
 
-out:
-	suppress = sysrq_down;
-	spin_unlock(&sysrq_event_lock);
-
 	return suppress;
 }
 
@@ -617,28 +693,28 @@ static int sysrq_connect(struct input_handler *handler,
 			 struct input_dev *dev,
 			 const struct input_device_id *id)
 {
-	struct input_handle *handle;
+	struct sysrq_state *sysrq;
 	int error;
 
-	sysrq_down = false;
-	sysrq_alt = 0;
-
-	handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL);
-	if (!handle)
+	sysrq = kzalloc(sizeof(struct sysrq_state), GFP_KERNEL);
+	if (!sysrq)
 		return -ENOMEM;
 
-	handle->dev = dev;
-	handle->handler = handler;
-	handle->name = "sysrq";
+	INIT_WORK(&sysrq->reinject_work, sysrq_reinject_alt_sysrq);
+
+	sysrq->handle.dev = dev;
+	sysrq->handle.handler = handler;
+	sysrq->handle.name = "sysrq";
+	sysrq->handle.private = sysrq;
 
-	error = input_register_handle(handle);
+	error = input_register_handle(&sysrq->handle);
 	if (error) {
 		pr_err("Failed to register input sysrq handler, error %d\n",
 			error);
 		goto err_free;
 	}
 
-	error = input_open_device(handle);
+	error = input_open_device(&sysrq->handle);
 	if (error) {
 		pr_err("Failed to open input device, error %d\n", error);
 		goto err_unregister;
@@ -647,17 +723,20 @@ static int sysrq_connect(struct input_handler *handler,
 	return 0;
 
  err_unregister:
-	input_unregister_handle(handle);
+	input_unregister_handle(&sysrq->handle);
  err_free:
-	kfree(handle);
+	kfree(sysrq);
 	return error;
 }
 
 static void sysrq_disconnect(struct input_handle *handle)
 {
+	struct sysrq_state *sysrq = handle->private;
+
 	input_close_device(handle);
+	cancel_work_sync(&sysrq->reinject_work);
 	input_unregister_handle(handle);
-	kfree(handle);
+	kfree(sysrq);
 }
 
 /*
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index cc1e9850d65..d8210ca0072 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -413,7 +413,8 @@ static void flush_to_ldisc(struct work_struct *work)
 	spin_lock_irqsave(&tty->buf.lock, flags);
 
 	if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
-		struct tty_buffer *head;
+		struct tty_buffer *head, *tail = tty->buf.tail;
+		int seen_tail = 0;
 		while ((head = tty->buf.head) != NULL) {
 			int count;
 			char *char_buf;
@@ -423,6 +424,15 @@ static void flush_to_ldisc(struct work_struct *work)
 			if (!count) {
 				if (head->next == NULL)
 					break;
+				/*
+				  There's a possibility tty might get new buffer
+				  added during the unlock window below. We could
+				  end up spinning in here forever hogging the CPU
+				  completely. To avoid this let's have a rest each
+				  time we processed the tail buffer.
+				*/
+				if (tail == head)
+					seen_tail = 1;
 				tty->buf.head = head->next;
 				tty_buffer_free(tty, head);
 				continue;
@@ -432,7 +442,7 @@ static void flush_to_ldisc(struct work_struct *work)
 			   line discipline as we want to empty the queue */
 			if (test_bit(TTY_FLUSHPENDING, &tty->flags))
 				break;
-			if (!tty->receive_room) {
+			if (!tty->receive_room || seen_tail) {
 				schedule_delayed_work(&tty->buf.work, 1);
 				break;
 			}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index c05c5af5aa0..464d09d9787 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -559,6 +559,9 @@ void __tty_hangup(struct tty_struct *tty)
 
 	tty_lock();
 
+	/* some functions below drop BTM, so we need this bit */
+	set_bit(TTY_HUPPING, &tty->flags);
+
 	/* inuse_filps is protected by the single tty lock,
 	   this really needs to change if we want to flush the
 	   workqueue with the lock held */
@@ -578,6 +581,10 @@ void __tty_hangup(struct tty_struct *tty)
 	}
 	spin_unlock(&tty_files_lock);
 
+	/*
+	 * it drops BTM and thus races with reopen
+	 * we protect the race by TTY_HUPPING
+	 */
 	tty_ldisc_hangup(tty);
 
 	read_lock(&tasklist_lock);
@@ -615,7 +622,6 @@ void __tty_hangup(struct tty_struct *tty)
 	tty->session = NULL;
 	tty->pgrp = NULL;
 	tty->ctrl_status = 0;
-	set_bit(TTY_HUPPED, &tty->flags);
 	spin_unlock_irqrestore(&tty->ctrl_lock, flags);
 
 	/* Account for the p->signal references we killed */
@@ -641,6 +647,7 @@ void __tty_hangup(struct tty_struct *tty)
 	 * can't yet guarantee all that.
 	 */
 	set_bit(TTY_HUPPED, &tty->flags);
+	clear_bit(TTY_HUPPING, &tty->flags);
 	tty_ldisc_enable(tty);
 
 	tty_unlock();
@@ -1310,7 +1317,9 @@ static int tty_reopen(struct tty_struct *tty)
 {
 	struct tty_driver *driver = tty->driver;
 
-	if (test_bit(TTY_CLOSING, &tty->flags))
+	if (test_bit(TTY_CLOSING, &tty->flags) ||
+			test_bit(TTY_HUPPING, &tty->flags) ||
+			test_bit(TTY_LDISC_CHANGING, &tty->flags))
 		return -EIO;
 
 	if (driver->type == TTY_DRIVER_TYPE_PTY &&
@@ -2618,6 +2627,11 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		return put_user(tty->ldisc->ops->num, (int __user *)p);
 	case TIOCSETD:
 		return tiocsetd(tty, p);
+	case TIOCGDEV:
+	{
+		unsigned int ret = new_encode_dev(tty_devnum(real_tty));
+		return put_user(ret, (unsigned int __user *)p);
+	}
 	/*
 	 * Break handling
 	 */
@@ -3232,9 +3246,45 @@ static int __init tty_class_init(void)
 postcore_initcall(tty_class_init);
 
 /* 3/2004 jmc: why do these devices exist? */
-
 static struct cdev tty_cdev, console_cdev;
 
+static ssize_t show_cons_active(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct console *cs[16];
+	int i = 0;
+	struct console *c;
+	ssize_t count = 0;
+
+	acquire_console_sem();
+	for (c = console_drivers; c; c = c->next) {
+		if (!c->device)
+			continue;
+		if (!c->write)
+			continue;
+		if ((c->flags & CON_ENABLED) == 0)
+			continue;
+		cs[i++] = c;
+		if (i >= ARRAY_SIZE(cs))
+			break;
+	}
+	while (i--)
+		count += sprintf(buf + count, "%s%d%c",
+				 cs[i]->name, cs[i]->index, i ? ' ':'\n');
+	release_console_sem();
+
+	return count;
+}
+static DEVICE_ATTR(active, S_IRUGO, show_cons_active, NULL);
+
+static struct device *consdev;
+
+void console_sysfs_notify(void)
+{
+	if (consdev)
+		sysfs_notify(&consdev->kobj, NULL, "active");
+}
+
 /*
  * Ok, now we can initialize the rest of the tty devices and can count
  * on memory allocations, interrupts etc..
@@ -3245,15 +3295,18 @@ int __init tty_init(void)
 	if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
 	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
 		panic("Couldn't register /dev/tty driver\n");
-	device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL,
-			      "tty");
+	device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
 
 	cdev_init(&console_cdev, &console_fops);
 	if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
 	    register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
 		panic("Couldn't register /dev/console driver\n");
-	device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
+	consdev = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
 			      "console");
+	if (IS_ERR(consdev))
+		consdev = NULL;
+	else
+		device_create_file(consdev, &dev_attr_active);
 
 #ifdef CONFIG_VT
 	vty_init(&console_fops);
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 412f9775d19..4214d58276f 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -47,6 +47,7 @@
 
 static DEFINE_SPINLOCK(tty_ldisc_lock);
 static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
+static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_idle);
 /* Line disc dispatch table */
 static struct tty_ldisc_ops *tty_ldiscs[NR_LDISCS];
 
@@ -83,6 +84,7 @@ static void put_ldisc(struct tty_ldisc *ld)
 		return;
 	}
 	local_irq_restore(flags);
+	wake_up(&tty_ldisc_idle);
 }
 
 /**
@@ -452,6 +454,8 @@ static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld)
                 /* BTM here locks versus a hangup event */
 		WARN_ON(!tty_locked());
 		ret = ld->ops->open(tty);
+		if (ret)
+			clear_bit(TTY_LDISC_OPEN, &tty->flags);
 		return ret;
 	}
 	return 0;
@@ -531,6 +535,23 @@ static int tty_ldisc_halt(struct tty_struct *tty)
 }
 
 /**
+ *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
+ *	@tty: tty to wait for
+ *
+ *	Wait for the line discipline to become idle. The discipline must
+ *	have been halted for this to guarantee it remains idle.
+ */
+static int tty_ldisc_wait_idle(struct tty_struct *tty)
+{
+	int ret;
+	ret = wait_event_interruptible_timeout(tty_ldisc_idle,
+			atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+	if (ret < 0)
+		return ret;
+	return ret > 0 ? 0 : -EBUSY;
+}
+
+/**
  *	tty_set_ldisc		-	set line discipline
  *	@tty: the terminal to set
  *	@ldisc: the line discipline
@@ -634,8 +655,17 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	flush_scheduled_work();
 
+	retval = tty_ldisc_wait_idle(tty);
+
 	tty_lock();
 	mutex_lock(&tty->ldisc_mutex);
+
+	/* handle wait idle failure locked */
+	if (retval) {
+		tty_ldisc_put(new_ldisc);
+		goto enable;
+	}
+
 	if (test_bit(TTY_HUPPED, &tty->flags)) {
 		/* We were raced by the hangup method. It will have stomped
 		   the ldisc data and closed the ldisc down */
@@ -669,6 +699,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	tty_ldisc_put(o_ldisc);
 
+enable:
 	/*
 	 *	Allow ldisc referencing to occur again
 	 */
@@ -714,9 +745,12 @@ static void tty_reset_termios(struct tty_struct *tty)
  *	state closed
  */
 
-static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
+static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
 {
-	struct tty_ldisc *ld;
+	struct tty_ldisc *ld = tty_ldisc_get(ldisc);
+
+	if (IS_ERR(ld))
+		return -1;
 
 	tty_ldisc_close(tty, tty->ldisc);
 	tty_ldisc_put(tty->ldisc);
@@ -724,10 +758,10 @@ static void tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
 	/*
 	 *	Switch the line discipline back
 	 */
-	ld = tty_ldisc_get(ldisc);
-	BUG_ON(IS_ERR(ld));
 	tty_ldisc_assign(tty, ld);
 	tty_set_termios_ldisc(tty, ldisc);
+
+	return 0;
 }
 
 /**
@@ -802,13 +836,16 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	   a FIXME */
 	if (tty->ldisc) {	/* Not yet closed */
 		if (reset == 0) {
-			tty_ldisc_reinit(tty, tty->termios->c_line);
-			err = tty_ldisc_open(tty, tty->ldisc);
+
+			if (!tty_ldisc_reinit(tty, tty->termios->c_line))
+				err = tty_ldisc_open(tty, tty->ldisc);
+			else
+				err = 1;
 		}
 		/* If the re-open fails or we reset then go to N_TTY. The
 		   N_TTY open cannot fail */
 		if (reset || err) {
-			tty_ldisc_reinit(tty, N_TTY);
+			BUG_ON(tty_ldisc_reinit(tty, N_TTY));
 			WARN_ON(tty_ldisc_open(tty, tty->ldisc));
 		}
 		tty_ldisc_enable(tty);
diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c
index 273ab44cc91..eab3a1ff99e 100644
--- a/drivers/tty/vt/vc_screen.c
+++ b/drivers/tty/vt/vc_screen.c
@@ -553,12 +553,12 @@ static unsigned int
 vcs_poll(struct file *file, poll_table *wait)
 {
 	struct vcs_poll_data *poll = vcs_poll_data_get(file);
-	int ret = 0;
+	int ret = DEFAULT_POLLMASK|POLLERR|POLLPRI;
 
 	if (poll) {
 		poll_wait(file, &poll->waitq, wait);
-		if (!poll->seen_last_update)
-			ret = POLLIN | POLLRDNORM;
+		if (poll->seen_last_update)
+			ret = DEFAULT_POLLMASK;
 	}
 	return ret;
 }
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index a8ec48ed14d..76407eca9ab 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -236,6 +236,14 @@ enum {
 };
 
 /*
+ * /sys/class/tty/tty0/
+ *
+ * the attribute 'active' contains the name of the current vc
+ * console and it supports poll() to detect vc switches
+ */
+static struct device *tty0dev;
+
+/*
  * Notifier list for console events.
  */
 static ATOMIC_NOTIFIER_HEAD(vt_notifier_list);
@@ -688,6 +696,8 @@ void redraw_screen(struct vc_data *vc, int is_switch)
 			save_screen(old_vc);
 			set_origin(old_vc);
 		}
+		if (tty0dev)
+			sysfs_notify(&tty0dev->kobj, NULL, "active");
 	} else {
 		hide_cursor(vc);
 		redraw = 1;
@@ -2967,13 +2977,24 @@ static const struct tty_operations con_ops = {
 
 static struct cdev vc0_cdev;
 
+static ssize_t show_tty_active(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "tty%d\n", fg_console + 1);
+}
+static DEVICE_ATTR(active, S_IRUGO, show_tty_active, NULL);
+
 int __init vty_init(const struct file_operations *console_fops)
 {
 	cdev_init(&vc0_cdev, console_fops);
 	if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) ||
 	    register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
 		panic("Couldn't register /dev/tty0 driver\n");
-	device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+	tty0dev = device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+	if (IS_ERR(tty0dev))
+		tty0dev = NULL;
+	else
+		device_create_file(tty0dev, &dev_attr_active);
 
 	vcs_init();
 
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index a858d2b87b9..51fe1795d5a 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -3,7 +3,7 @@
  *
  * Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
  * Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- * Copyright(C) 2006, Hans J. Koch <hjk@linutronix.de>
+ * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
  * Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
  *
  * Userspace IO
diff --git a/drivers/uio/uio_cif.c b/drivers/uio/uio_cif.c
index a8ea2f19a0c..a84a451159e 100644
--- a/drivers/uio/uio_cif.c
+++ b/drivers/uio/uio_cif.c
@@ -1,7 +1,7 @@
 /*
  * UIO Hilscher CIF card driver
  *
- * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
  * Original code (C) 2005 Benedikt Spranger <b.spranger@linutronix.de>
  *
  * Licensed under GPL version 2 only.
diff --git a/drivers/uio/uio_netx.c b/drivers/uio/uio_netx.c
index 5a18e9f7b83..5ffdb483b01 100644
--- a/drivers/uio/uio_netx.c
+++ b/drivers/uio/uio_netx.c
@@ -2,7 +2,7 @@
  * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
  * See http://www.hilscher.com for details.
  *
- * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
  * (C) 2008 Manuel Traut <manut@linutronix.de>
  *
  * Licensed under GPL version 2 only.
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 67eb3770868..fceea5e4e02 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -41,17 +41,14 @@ config USB_ARCH_HAS_OHCI
 	default y if MFD_TC6393XB
 	default y if ARCH_W90X900
 	default y if ARCH_DAVINCI_DA8XX
+	default y if ARCH_CNS3XXX
+	default y if PLAT_SPEAR
 	# PPC:
 	default y if STB03xxx
 	default y if PPC_MPC52xx
 	# MIPS:
 	default y if MIPS_ALCHEMY
 	default y if MACH_JZ4740
-	# SH:
-	default y if CPU_SUBTYPE_SH7720
-	default y if CPU_SUBTYPE_SH7721
-	default y if CPU_SUBTYPE_SH7763
-	default y if CPU_SUBTYPE_SH7786
 	# more:
 	default PCI
 
@@ -66,6 +63,10 @@ config USB_ARCH_HAS_EHCI
 	default y if ARCH_AT91SAM9G45
 	default y if ARCH_MXC
 	default y if ARCH_OMAP3
+	default y if ARCH_CNS3XXX
+	default y if ARCH_VT8500
+	default y if PLAT_SPEAR
+	default y if ARCH_MSM
 	default PCI
 
 # ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index f383cb42b1d..a845f8b8382 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -1247,7 +1247,7 @@ static void cxacru_unbind(struct usbatm_data *usbatm_instance,
 	mutex_unlock(&instance->poll_state_serialize);
 
 	if (is_polling)
-		cancel_rearming_delayed_work(&instance->poll_work);
+		cancel_delayed_work_sync(&instance->poll_work);
 
 	usb_kill_urb(instance->snd_urb);
 	usb_kill_urb(instance->rcv_urb);
diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 4716e707de5..0842cfbf60c 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -139,7 +139,8 @@ struct speedtch_instance_data {
 
 	struct speedtch_params params; /* set in probe, constant afterwards */
 
-	struct delayed_work status_checker;
+	struct timer_list status_check_timer;
+	struct work_struct status_check_work;
 
 	unsigned char last_status;
 
@@ -498,7 +499,7 @@ static void speedtch_check_status(struct work_struct *work)
 {
 	struct speedtch_instance_data *instance =
 		container_of(work, struct speedtch_instance_data,
-			     status_checker.work);
+			     status_check_work);
 	struct usbatm_data *usbatm = instance->usbatm;
 	struct atm_dev *atm_dev = usbatm->atm_dev;
 	unsigned char *buf = instance->scratch_buffer;
@@ -575,11 +576,11 @@ static void speedtch_status_poll(unsigned long data)
 {
 	struct speedtch_instance_data *instance = (void *)data;
 
-	schedule_delayed_work(&instance->status_checker, 0);
+	schedule_work(&instance->status_check_work);
 
 	/* The following check is racy, but the race is harmless */
 	if (instance->poll_delay < MAX_POLL_DELAY)
-		mod_timer(&instance->status_checker.timer, jiffies + msecs_to_jiffies(instance->poll_delay));
+		mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(instance->poll_delay));
 	else
 		atm_warn(instance->usbatm, "Too many failures - disabling line status polling\n");
 }
@@ -595,7 +596,7 @@ static void speedtch_resubmit_int(unsigned long data)
 	if (int_urb) {
 		ret = usb_submit_urb(int_urb, GFP_ATOMIC);
 		if (!ret)
-			schedule_delayed_work(&instance->status_checker, 0);
+			schedule_work(&instance->status_check_work);
 		else {
 			atm_dbg(instance->usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
 			mod_timer(&instance->resubmit_timer, jiffies + msecs_to_jiffies(RESUBMIT_DELAY));
@@ -624,7 +625,7 @@ static void speedtch_handle_int(struct urb *int_urb)
 	}
 
 	if ((count == 6) && !memcmp(up_int, instance->int_data, 6)) {
-		del_timer(&instance->status_checker.timer);
+		del_timer(&instance->status_check_timer);
 		atm_info(usbatm, "DSL line goes up\n");
 	} else if ((count == 6) && !memcmp(down_int, instance->int_data, 6)) {
 		atm_info(usbatm, "DSL line goes down\n");
@@ -640,7 +641,7 @@ static void speedtch_handle_int(struct urb *int_urb)
 
 	if ((int_urb = instance->int_urb)) {
 		ret = usb_submit_urb(int_urb, GFP_ATOMIC);
-		schedule_delayed_work(&instance->status_checker, 0);
+		schedule_work(&instance->status_check_work);
 		if (ret < 0) {
 			atm_dbg(usbatm, "%s: usb_submit_urb failed with result %d\n", __func__, ret);
 			goto fail;
@@ -686,7 +687,7 @@ static int speedtch_atm_start(struct usbatm_data *usbatm, struct atm_dev *atm_de
 	}
 
 	/* Start status polling */
-	mod_timer(&instance->status_checker.timer, jiffies + msecs_to_jiffies(1000));
+	mod_timer(&instance->status_check_timer, jiffies + msecs_to_jiffies(1000));
 
 	return 0;
 }
@@ -698,7 +699,7 @@ static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_de
 
 	atm_dbg(usbatm, "%s entered\n", __func__);
 
-	del_timer_sync(&instance->status_checker.timer);
+	del_timer_sync(&instance->status_check_timer);
 
 	/*
 	 * Since resubmit_timer and int_urb can schedule themselves and
@@ -717,7 +718,7 @@ static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_de
 	del_timer_sync(&instance->resubmit_timer);
 	usb_free_urb(int_urb);
 
-	flush_scheduled_work();
+	flush_work_sync(&instance->status_check_work);
 }
 
 static int speedtch_pre_reset(struct usb_interface *intf)
@@ -869,10 +870,11 @@ static int speedtch_bind(struct usbatm_data *usbatm,
 
 	usbatm->flags |= (use_isoc ? UDSL_USE_ISOC : 0);
 
-	INIT_DELAYED_WORK(&instance->status_checker, speedtch_check_status);
+	INIT_WORK(&instance->status_check_work, speedtch_check_status);
+	init_timer(&instance->status_check_timer);
 
-	instance->status_checker.timer.function = speedtch_status_poll;
-	instance->status_checker.timer.data = (unsigned long)instance;
+	instance->status_check_timer.function = speedtch_status_poll;
+	instance->status_check_timer.data = (unsigned long)instance;
 	instance->last_status = 0xff;
 	instance->poll_delay = MIN_POLL_DELAY;
 
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index ea071a5b6ee..99ac70e3255 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -2206,8 +2206,11 @@ static int uea_boot(struct uea_softc *sc)
 		goto err1;
 	}
 
-	sc->kthread = kthread_run(uea_kthread, sc, "ueagle-atm");
-	if (sc->kthread == ERR_PTR(-ENOMEM)) {
+	/* Create worker thread, but don't start it here.  Start it after
+	 * all usbatm generic initialization is done.
+	 */
+	sc->kthread = kthread_create(uea_kthread, sc, "ueagle-atm");
+	if (IS_ERR(sc->kthread)) {
 		uea_err(INS_TO_USBDEV(sc), "failed to create thread\n");
 		goto err2;
 	}
@@ -2301,7 +2304,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_status, S_IWUGO | S_IRUGO, read_status, reboot);
+static DEVICE_ATTR(stat_status, S_IWUSR | S_IRUGO, read_status, reboot);
 
 static ssize_t read_human_status(struct device *dev,
 			struct device_attribute *attr, char *buf)
@@ -2364,8 +2367,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_human_status, S_IWUGO | S_IRUGO,
-				read_human_status, NULL);
+static DEVICE_ATTR(stat_human_status, S_IRUGO, read_human_status, NULL);
 
 static ssize_t read_delin(struct device *dev, struct device_attribute *attr,
 		char *buf)
@@ -2397,7 +2399,7 @@ out:
 	return ret;
 }
 
-static DEVICE_ATTR(stat_delin, S_IWUGO | S_IRUGO, read_delin, NULL);
+static DEVICE_ATTR(stat_delin, S_IRUGO, read_delin, NULL);
 
 #define UEA_ATTR(name, reset)					\
 								\
@@ -2625,6 +2627,7 @@ static struct usbatm_driver uea_usbatm_driver = {
 static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
 {
 	struct usb_device *usb = interface_to_usbdev(intf);
+	int ret;
 
 	uea_enters(usb);
 	uea_info(usb, "ADSL device founded vid (%#X) pid (%#X) Rev (%#X): %s\n",
@@ -2638,7 +2641,19 @@ static int uea_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (UEA_IS_PREFIRM(id))
 		return uea_load_firmware(usb, UEA_CHIP_VERSION(id));
 
-	return usbatm_usb_probe(intf, id, &uea_usbatm_driver);
+	ret = usbatm_usb_probe(intf, id, &uea_usbatm_driver);
+	if (ret == 0) {
+		struct usbatm_data *usbatm = usb_get_intfdata(intf);
+		struct uea_softc *sc = usbatm->driver_data;
+
+		/* Ensure carrier is initialized to off as early as possible */
+		UPDATE_ATM_SIGNAL(ATM_PHY_SIG_LOST);
+
+		/* Only start the worker thread when all init is done */
+		wake_up_process(sc->kthread);
+	}
+
+	return ret;
 }
 
 static void uea_disconnect(struct usb_interface *intf)
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c
index 05bf5a27b5b..989e16e4ab5 100644
--- a/drivers/usb/atm/usbatm.c
+++ b/drivers/usb/atm/usbatm.c
@@ -951,7 +951,9 @@ static int usbatm_atm_init(struct usbatm_data *instance)
 	 * condition: callbacks we register can be executed at once, before we have
 	 * initialized the struct atm_dev.  To protect against this, all callbacks
 	 * abort if atm_dev->dev_data is NULL. */
-	atm_dev = atm_dev_register(instance->driver_name, &usbatm_atm_devops, -1, NULL);
+	atm_dev = atm_dev_register(instance->driver_name,
+				   &instance->usb_intf->dev, &usbatm_atm_devops,
+				   -1, NULL);
 	if (!atm_dev) {
 		usb_err(instance, "%s: failed to register ATM device!\n", __func__);
 		return -1;
@@ -966,14 +968,6 @@ static int usbatm_atm_init(struct usbatm_data *instance)
 	/* temp init ATM device, set to 128kbit */
 	atm_dev->link_rate = 128 * 1000 / 424;
 
-	ret = sysfs_create_link(&atm_dev->class_dev.kobj,
-				&instance->usb_intf->dev.kobj, "device");
-	if (ret) {
-		atm_err(instance, "%s: sysfs_create_link failed: %d\n",
-					__func__, ret);
-		goto fail_sysfs;
-	}
-
 	if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
 		atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
 		goto fail;
@@ -992,8 +986,6 @@ static int usbatm_atm_init(struct usbatm_data *instance)
 	return 0;
 
  fail:
-	sysfs_remove_link(&atm_dev->class_dev.kobj, "device");
- fail_sysfs:
 	instance->atm_dev = NULL;
 	atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
 	return ret;
@@ -1329,7 +1321,6 @@ void usbatm_usb_disconnect(struct usb_interface *intf)
 
 	/* ATM finalize */
 	if (instance->atm_dev) {
-		sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device");
 		atm_dev_deregister(instance->atm_dev);
 		instance->atm_dev = NULL;
 	}
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 9eed5b52d9d..bcc24779ba0 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -107,11 +107,19 @@ config USB_SUSPEND
 	  If you are unsure about this, say N here.
 
 config USB_OTG
-	bool
+	bool "OTG support"
 	depends on USB && EXPERIMENTAL
 	depends on USB_SUSPEND
 	default n
-
+	help
+	  The most notable feature of USB OTG is support for a
+	  "Dual-Role" device, which can act as either a device
+	  or a host. The initial role is decided by the type of
+	  plug inserted and can be changed later when two dual
+	  role devices talk to each other.
+
+	  Select this only if your board has Mini-AB/Micro-AB
+	  connector.
 
 config USB_OTG_WHITELIST
 	bool "Rely on OTG Targeted Peripherals List"
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index ddb4dc98092..a3d2e239965 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -54,7 +54,6 @@
 #include <linux/gfp.h>
 #include <linux/poll.h>
 #include <linux/usb.h>
-#include <linux/smp_lock.h>
 #include <linux/usbdevice_fs.h>
 #include <linux/usb/hcd.h>
 #include <linux/mutex.h>
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index f1aaff6202a..a7131ad630f 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -37,7 +37,6 @@
 #include <linux/fs.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/signal.h>
 #include <linux/poll.h>
 #include <linux/module.h>
@@ -965,10 +964,11 @@ static int proc_getdriver(struct dev_state *ps, void __user *arg)
 
 static int proc_connectinfo(struct dev_state *ps, void __user *arg)
 {
-	struct usbdevfs_connectinfo ci;
+	struct usbdevfs_connectinfo ci = {
+		.devnum = ps->dev->devnum,
+		.slow = ps->dev->speed == USB_SPEED_LOW
+	};
 
-	ci.devnum = ps->dev->devnum;
-	ci.slow = ps->dev->speed == USB_SPEED_LOW;
 	if (copy_to_user(arg, &ci, sizeof(ci)))
 		return -EFAULT;
 	return 0;
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index c0e60fbcb04..b9278a1fb9e 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -27,7 +27,6 @@
 #include <linux/usb.h>
 #include <linux/usb/quirks.h>
 #include <linux/usb/hcd.h>
-#include <linux/pm_runtime.h>
 
 #include "usb.h"
 
@@ -1262,6 +1261,7 @@ static int usb_resume_both(struct usb_device *udev, pm_message_t msg)
 					udev->reset_resume);
 		}
 	}
+	usb_mark_last_busy(udev);
 
  done:
 	dev_vdbg(&udev->dev, "%s: status %d\n", __func__, status);
@@ -1329,7 +1329,6 @@ int usb_resume(struct device *dev, pm_message_t msg)
 			pm_runtime_disable(dev);
 			pm_runtime_set_active(dev);
 			pm_runtime_enable(dev);
-			udev->last_busy = jiffies;
 			do_unbind_rebind(udev, DO_REBIND);
 		}
 	}
@@ -1397,33 +1396,8 @@ void usb_autosuspend_device(struct usb_device *udev)
 {
 	int	status;
 
-	udev->last_busy = jiffies;
-	status = pm_runtime_put_sync(&udev->dev);
-	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
-			__func__, atomic_read(&udev->dev.power.usage_count),
-			status);
-}
-
-/**
- * usb_try_autosuspend_device - attempt an autosuspend of a USB device and its interfaces
- * @udev: the usb_device to autosuspend
- *
- * This routine should be called when a core subsystem thinks @udev may
- * be ready to autosuspend.
- *
- * @udev's usage counter left unchanged.  If it is 0 and all the interfaces
- * are inactive then an autosuspend will be attempted.  The attempt may
- * fail or be delayed.
- *
- * The caller must hold @udev's device lock.
- *
- * This routine can run only in process context.
- */
-void usb_try_autosuspend_device(struct usb_device *udev)
-{
-	int	status;
-
-	status = pm_runtime_idle(&udev->dev);
+	usb_mark_last_busy(udev);
+	status = pm_runtime_put_sync_autosuspend(&udev->dev);
 	dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&udev->dev.power.usage_count),
 			status);
@@ -1482,7 +1456,7 @@ void usb_autopm_put_interface(struct usb_interface *intf)
 	struct usb_device	*udev = interface_to_usbdev(intf);
 	int			status;
 
-	udev->last_busy = jiffies;
+	usb_mark_last_busy(udev);
 	atomic_dec(&intf->pm_usage_cnt);
 	status = pm_runtime_put_sync(&intf->dev);
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
@@ -1509,32 +1483,11 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
 void usb_autopm_put_interface_async(struct usb_interface *intf)
 {
 	struct usb_device	*udev = interface_to_usbdev(intf);
-	unsigned long		last_busy;
-	int			status = 0;
+	int			status;
 
-	last_busy = udev->last_busy;
-	udev->last_busy = jiffies;
+	usb_mark_last_busy(udev);
 	atomic_dec(&intf->pm_usage_cnt);
-	pm_runtime_put_noidle(&intf->dev);
-
-	if (udev->dev.power.runtime_auto) {
-		/* Optimization: Don't schedule a delayed autosuspend if
-		 * the timer is already running and the expiration time
-		 * wouldn't change.
-		 *
-		 * We have to use the interface's timer.  Attempts to
-		 * schedule a suspend for the device would fail because
-		 * the interface is still active.
-		 */
-		if (intf->dev.power.timer_expires == 0 ||
-				round_jiffies_up(last_busy) !=
-				round_jiffies_up(jiffies)) {
-			status = pm_schedule_suspend(&intf->dev,
-					jiffies_to_msecs(
-					round_jiffies_up_relative(
-						udev->autosuspend_delay)));
-		}
-	}
+	status = pm_runtime_put(&intf->dev);
 	dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n",
 			__func__, atomic_read(&intf->dev.power.usage_count),
 			status);
@@ -1554,7 +1507,7 @@ void usb_autopm_put_interface_no_suspend(struct usb_interface *intf)
 {
 	struct usb_device	*udev = interface_to_usbdev(intf);
 
-	udev->last_busy = jiffies;
+	usb_mark_last_busy(udev);
 	atomic_dec(&intf->pm_usage_cnt);
 	pm_runtime_put_noidle(&intf->dev);
 }
@@ -1612,18 +1565,9 @@ EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
  */
 int usb_autopm_get_interface_async(struct usb_interface *intf)
 {
-	int		status = 0;
-	enum rpm_status	s;
-
-	/* Don't request a resume unless the interface is already suspending
-	 * or suspended.  Doing so would force a running suspend timer to be
-	 * cancelled.
-	 */
-	pm_runtime_get_noresume(&intf->dev);
-	s = ACCESS_ONCE(intf->dev.power.runtime_status);
-	if (s == RPM_SUSPENDING || s == RPM_SUSPENDED)
-		status = pm_request_resume(&intf->dev);
+	int	status;
 
+	status = pm_runtime_get(&intf->dev);
 	if (status < 0 && status != -EINPROGRESS)
 		pm_runtime_put_noidle(&intf->dev);
 	else
@@ -1650,7 +1594,7 @@ void usb_autopm_get_interface_no_resume(struct usb_interface *intf)
 {
 	struct usb_device	*udev = interface_to_usbdev(intf);
 
-	udev->last_busy = jiffies;
+	usb_mark_last_busy(udev);
 	atomic_inc(&intf->pm_usage_cnt);
 	pm_runtime_get_noresume(&intf->dev);
 }
@@ -1661,7 +1605,6 @@ static int autosuspend_check(struct usb_device *udev)
 {
 	int			w, i;
 	struct usb_interface	*intf;
-	unsigned long		suspend_time, j;
 
 	/* Fail if autosuspend is disabled, or any interfaces are in use, or
 	 * any interface drivers require remote wakeup but it isn't available.
@@ -1701,87 +1644,46 @@ static int autosuspend_check(struct usb_device *udev)
 		return -EOPNOTSUPP;
 	}
 	udev->do_remote_wakeup = w;
-
-	/* If everything is okay but the device hasn't been idle for long
-	 * enough, queue a delayed autosuspend request.
-	 */
-	j = ACCESS_ONCE(jiffies);
-	suspend_time = udev->last_busy + udev->autosuspend_delay;
-	if (time_before(j, suspend_time)) {
-		pm_schedule_suspend(&udev->dev, jiffies_to_msecs(
-				round_jiffies_up_relative(suspend_time - j)));
-		return -EAGAIN;
-	}
 	return 0;
 }
 
 static int usb_runtime_suspend(struct device *dev)
 {
-	int	status = 0;
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
 
 	/* A USB device can be suspended if it passes the various autosuspend
 	 * checks.  Runtime suspend for a USB device means suspending all the
 	 * interfaces and then the device itself.
 	 */
-	if (is_usb_device(dev)) {
-		struct usb_device	*udev = to_usb_device(dev);
-
-		if (autosuspend_check(udev) != 0)
-			return -EAGAIN;
-
-		status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
-
-		/* If an interface fails the suspend, adjust the last_busy
-		 * time so that we don't get another suspend attempt right
-		 * away.
-		 */
-		if (status) {
-			udev->last_busy = jiffies +
-					(udev->autosuspend_delay == 0 ?
-						HZ/2 : 0);
-		}
-
-		/* Prevent the parent from suspending immediately after */
-		else if (udev->parent)
-			udev->parent->last_busy = jiffies;
-	}
+	if (autosuspend_check(udev) != 0)
+		return -EAGAIN;
 
-	/* Runtime suspend for a USB interface doesn't mean anything. */
+	status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND);
 	return status;
 }
 
 static int usb_runtime_resume(struct device *dev)
 {
+	struct usb_device	*udev = to_usb_device(dev);
+	int			status;
+
 	/* Runtime resume for a USB device means resuming both the device
 	 * and all its interfaces.
 	 */
-	if (is_usb_device(dev)) {
-		struct usb_device	*udev = to_usb_device(dev);
-		int			status;
-
-		status = usb_resume_both(udev, PMSG_AUTO_RESUME);
-		udev->last_busy = jiffies;
-		return status;
-	}
-
-	/* Runtime resume for a USB interface doesn't mean anything. */
-	return 0;
+	status = usb_resume_both(udev, PMSG_AUTO_RESUME);
+	return status;
 }
 
 static int usb_runtime_idle(struct device *dev)
 {
+	struct usb_device	*udev = to_usb_device(dev);
+
 	/* An idle USB device can be suspended if it passes the various
-	 * autosuspend checks.  An idle interface can be suspended at
-	 * any time.
+	 * autosuspend checks.
 	 */
-	if (is_usb_device(dev)) {
-		struct usb_device	*udev = to_usb_device(dev);
-
-		if (autosuspend_check(udev) != 0)
-			return 0;
-	}
-
-	pm_runtime_suspend(dev);
+	if (autosuspend_check(udev) == 0)
+		pm_runtime_autosuspend(dev);
 	return 0;
 }
 
diff --git a/drivers/usb/core/file.c b/drivers/usb/core/file.c
index 9fe34fb78ef..cf6a5423de0 100644
--- a/drivers/usb/core/file.c
+++ b/drivers/usb/core/file.c
@@ -19,7 +19,6 @@
 #include <linux/errno.h>
 #include <linux/rwsem.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/usb.h>
 
 #include "usb.h"
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 3799573bd38..b55d46070a2 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -19,7 +19,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-#include <linux/pm_runtime.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
 
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 61800f77dac..6a95017fa62 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -38,7 +38,6 @@
 #include <asm/unaligned.h>
 #include <linux/platform_device.h>
 #include <linux/workqueue.h>
-#include <linux/pm_runtime.h>
 
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
@@ -1330,6 +1329,8 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
 	 */
 
 	if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+		if (hcd->self.uses_pio_for_control)
+			return ret;
 		if (hcd->self.uses_dma) {
 			urb->setup_dma = dma_map_single(
 					hcd->self.controller,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 27115b45edc..b98efae6a1c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -24,7 +24,6 @@
 #include <linux/kthread.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
-#include <linux/pm_runtime.h>
 
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
@@ -1804,8 +1803,15 @@ int usb_new_device(struct usb_device *udev)
 
 	/* Tell the runtime-PM framework the device is active */
 	pm_runtime_set_active(&udev->dev);
+	pm_runtime_get_noresume(&udev->dev);
+	pm_runtime_use_autosuspend(&udev->dev);
 	pm_runtime_enable(&udev->dev);
 
+	/* By default, forbid autosuspend for all devices.  It will be
+	 * allowed for hubs during binding.
+	 */
+	usb_disable_autosuspend(udev);
+
 	err = usb_enumerate_device(udev);	/* Read descriptors */
 	if (err < 0)
 		goto fail;
@@ -1831,6 +1837,8 @@ int usb_new_device(struct usb_device *udev)
 	}
 
 	(void) usb_create_ep_devs(&udev->dev, &udev->ep0, udev);
+	usb_mark_last_busy(udev);
+	pm_runtime_put_sync_autosuspend(&udev->dev);
 	return err;
 
 fail:
@@ -2221,6 +2229,7 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 		usb_set_device_state(udev, USB_STATE_SUSPENDED);
 		msleep(10);
 	}
+	usb_mark_last_busy(hub->hdev);
 	return status;
 }
 
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 9819a4cc3b2..1b125c224dc 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -39,7 +39,6 @@
 #include <linux/parser.h>
 #include <linux/notifier.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/usb/hcd.h>
 #include <asm/byteorder.h>
 #include "usb.h"
@@ -344,17 +343,19 @@ static int usbfs_empty (struct dentry *dentry)
 {
 	struct list_head *list;
 
-	spin_lock(&dcache_lock);
-
+	spin_lock(&dentry->d_lock);
 	list_for_each(list, &dentry->d_subdirs) {
 		struct dentry *de = list_entry(list, struct dentry, d_u.d_child);
+
+		spin_lock_nested(&de->d_lock, DENTRY_D_LOCK_NESTED);
 		if (usbfs_positive(de)) {
-			spin_unlock(&dcache_lock);
+			spin_unlock(&de->d_lock);
+			spin_unlock(&dentry->d_lock);
 			return 0;
 		}
+		spin_unlock(&de->d_lock);
 	}
-
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dentry->d_lock);
 	return 1;
 }
 
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index d6e3e410477..83248742382 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1804,6 +1804,7 @@ free_interfaces:
 		INIT_WORK(&intf->reset_ws, __usb_queue_reset_device);
 		intf->minor = -1;
 		device_initialize(&intf->dev);
+		pm_runtime_no_callbacks(&intf->dev);
 		dev_set_name(&intf->dev, "%d-%s:%d.%d",
 			dev->bus->busnum, dev->devpath,
 			configuration, alt->desc.bInterfaceNumber);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 25719da45e3..44c595432d6 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -117,21 +117,6 @@ void usb_detect_quirks(struct usb_device *udev)
 		dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
 				udev->quirks);
 
-#ifdef	CONFIG_USB_SUSPEND
-
-	/* By default, disable autosuspend for all devices.  The hub driver
-	 * will enable it for hubs.
-	 */
-	usb_disable_autosuspend(udev);
-
-	/* Autosuspend can also be disabled if the initial autosuspend_delay
-	 * is negative.
-	 */
-	if (udev->autosuspend_delay < 0)
-		usb_autoresume_device(udev);
-
-#endif
-
 	/* For the present, all devices default to USB-PERSIST enabled */
 #if 0		/* was: #ifdef CONFIG_PM */
 	/* Hubs are automatically enabled for USB-PERSIST */
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 448f5b47fc4..6781c369ce2 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -233,8 +233,6 @@ static DEVICE_ATTR(urbnum, S_IRUGO, show_urbnum, NULL);
 
 #ifdef	CONFIG_PM
 
-static const char power_group[] = "power";
-
 static ssize_t
 show_persist(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -278,7 +276,7 @@ static int add_persist_attributes(struct device *dev)
 		if (udev->descriptor.bDeviceClass != USB_CLASS_HUB)
 			rc = sysfs_add_file_to_group(&dev->kobj,
 					&dev_attr_persist.attr,
-					power_group);
+					power_group_name);
 	}
 	return rc;
 }
@@ -287,7 +285,7 @@ static void remove_persist_attributes(struct device *dev)
 {
 	sysfs_remove_file_from_group(&dev->kobj,
 			&dev_attr_persist.attr,
-			power_group);
+			power_group_name);
 }
 #else
 
@@ -336,44 +334,20 @@ static DEVICE_ATTR(active_duration, S_IRUGO, show_active_duration, NULL);
 static ssize_t
 show_autosuspend(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct usb_device *udev = to_usb_device(dev);
-
-	return sprintf(buf, "%d\n", udev->autosuspend_delay / HZ);
+	return sprintf(buf, "%d\n", dev->power.autosuspend_delay / 1000);
 }
 
 static ssize_t
 set_autosuspend(struct device *dev, struct device_attribute *attr,
 		const char *buf, size_t count)
 {
-	struct usb_device *udev = to_usb_device(dev);
-	int value, old_delay;
-	int rc;
+	int value;
 
-	if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/HZ ||
-			value <= - INT_MAX/HZ)
+	if (sscanf(buf, "%d", &value) != 1 || value >= INT_MAX/1000 ||
+			value <= -INT_MAX/1000)
 		return -EINVAL;
-	value *= HZ;
-
-	usb_lock_device(udev);
-	old_delay = udev->autosuspend_delay;
-	udev->autosuspend_delay = value;
-
-	if (old_delay < 0) {	/* Autosuspend wasn't allowed */
-		if (value >= 0)
-			usb_autosuspend_device(udev);
-	} else {		/* Autosuspend was allowed */
-		if (value < 0) {
-			rc = usb_autoresume_device(udev);
-			if (rc < 0) {
-				count = rc;
-				udev->autosuspend_delay = old_delay;
-			}
-		} else {
-			usb_try_autosuspend_device(udev);
-		}
-	}
 
-	usb_unlock_device(udev);
+	pm_runtime_set_autosuspend_delay(dev, value * 1000);
 	return count;
 }
 
@@ -438,44 +412,30 @@ set_level(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(level, S_IRUGO | S_IWUSR, show_level, set_level);
 
+static struct attribute *power_attrs[] = {
+	&dev_attr_autosuspend.attr,
+	&dev_attr_level.attr,
+	&dev_attr_connected_duration.attr,
+	&dev_attr_active_duration.attr,
+	NULL,
+};
+static struct attribute_group power_attr_group = {
+	.name	= power_group_name,
+	.attrs	= power_attrs,
+};
+
 static int add_power_attributes(struct device *dev)
 {
 	int rc = 0;
 
-	if (is_usb_device(dev)) {
-		rc = sysfs_add_file_to_group(&dev->kobj,
-				&dev_attr_autosuspend.attr,
-				power_group);
-		if (rc == 0)
-			rc = sysfs_add_file_to_group(&dev->kobj,
-					&dev_attr_level.attr,
-					power_group);
-		if (rc == 0)
-			rc = sysfs_add_file_to_group(&dev->kobj,
-					&dev_attr_connected_duration.attr,
-					power_group);
-		if (rc == 0)
-			rc = sysfs_add_file_to_group(&dev->kobj,
-					&dev_attr_active_duration.attr,
-					power_group);
-	}
+	if (is_usb_device(dev))
+		rc = sysfs_merge_group(&dev->kobj, &power_attr_group);
 	return rc;
 }
 
 static void remove_power_attributes(struct device *dev)
 {
-	sysfs_remove_file_from_group(&dev->kobj,
-			&dev_attr_active_duration.attr,
-			power_group);
-	sysfs_remove_file_from_group(&dev->kobj,
-			&dev_attr_connected_duration.attr,
-			power_group);
-	sysfs_remove_file_from_group(&dev->kobj,
-			&dev_attr_level.attr,
-			power_group);
-	sysfs_remove_file_from_group(&dev->kobj,
-			&dev_attr_autosuspend.attr,
-			power_group);
+	sysfs_unmerge_group(&dev->kobj, &power_attr_group);
 }
 
 #else
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index fdd4130fbb7..079cb57bab4 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -445,7 +445,8 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	INIT_LIST_HEAD(&dev->filelist);
 
 #ifdef	CONFIG_PM
-	dev->autosuspend_delay = usb_autosuspend_delay * HZ;
+	pm_runtime_set_autosuspend_delay(&dev->dev,
+			usb_autosuspend_delay * 1000);
 	dev->connect_time = jiffies;
 	dev->active_duration = -jiffies;
 #endif
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index cd882203ad3..b975450f403 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -75,14 +75,12 @@ static inline int usb_port_resume(struct usb_device *udev, pm_message_t msg)
 #ifdef CONFIG_USB_SUSPEND
 
 extern void usb_autosuspend_device(struct usb_device *udev);
-extern void usb_try_autosuspend_device(struct usb_device *udev);
 extern int usb_autoresume_device(struct usb_device *udev);
 extern int usb_remote_wakeup(struct usb_device *dev);
 
 #else
 
 #define usb_autosuspend_device(udev)		do {} while (0)
-#define usb_try_autosuspend_device(udev)	do {} while (0)
 static inline int usb_autoresume_device(struct usb_device *udev)
 {
 	return 0;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index b739ca81465..1dc9739277b 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -158,7 +158,7 @@ config USB_GADGET_FSL_USB2
 	boolean "Freescale Highspeed USB DR Peripheral Controller"
 	depends on FSL_SOC || ARCH_MXC
 	select USB_GADGET_DUALSPEED
-	select USB_FSL_MPH_DR_OF
+	select USB_FSL_MPH_DR_OF if OF
 	help
 	   Some of Freescale PowerPC processors have a High Speed
 	   Dual-Role(DR) USB controller, which supports device mode.
@@ -338,6 +338,19 @@ config USB_S3C2410_DEBUG
 	boolean "S3C2410 udc debug messages"
 	depends on USB_GADGET_S3C2410
 
+config USB_GADGET_PXA_U2O
+	boolean "PXA9xx Processor USB2.0 controller"
+	select USB_GADGET_DUALSPEED
+	help
+	  PXA9xx Processor series include a high speed USB2.0 device
+	  controller, which support high speed and full speed USB peripheral.
+
+config USB_PXA_U2O
+	tristate
+	depends on USB_GADGET_PXA_U2O
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
 #
 # Controllers available in both integrated and discrete versions
 #
@@ -414,8 +427,8 @@ config USB_FSL_QE
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
-config USB_GADGET_CI13XXX
-	boolean "MIPS USB CI13xxx"
+config USB_GADGET_CI13XXX_PCI
+	boolean "MIPS USB CI13xxx PCI UDC"
 	depends on PCI
 	select USB_GADGET_DUALSPEED
 	help
@@ -426,9 +439,9 @@ config USB_GADGET_CI13XXX
 	  dynamically linked module called "ci13xxx_udc" and force all
 	  gadget drivers to also be dynamically linked.
 
-config USB_CI13XXX
+config USB_CI13XXX_PCI
 	tristate
-	depends on USB_GADGET_CI13XXX
+	depends on USB_GADGET_CI13XXX_PCI
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
@@ -495,6 +508,49 @@ config USB_LANGWELL
 	default USB_GADGET
 	select USB_GADGET_SELECTED
 
+config USB_GADGET_EG20T
+	boolean "Intel EG20T(Topcliff) USB Device controller"
+	depends on PCI
+	select USB_GADGET_DUALSPEED
+	help
+	  This is a USB device driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
+	  general embedded platform. EG20T PCH has USB device interface.
+	  Using this interface, it is able to access system devices connected
+	  to USB device.
+	  This driver enables USB device function.
+	  USB device is a USB peripheral controller which
+	  supports both full and high speed USB 2.0 data transfers.
+	  This driver supports both control transfer and bulk transfer modes.
+	  This driver dose not support interrupt transfer or isochronous
+	  transfer modes.
+
+config USB_EG20T
+	tristate
+	depends on USB_GADGET_EG20T
+	default USB_GADGET
+	select USB_GADGET_SELECTED
+
+config USB_GADGET_CI13XXX_MSM
+	boolean "MIPS USB CI13xxx for MSM"
+	depends on ARCH_MSM
+	select USB_GADGET_DUALSPEED
+	select USB_MSM_OTG_72K
+	help
+	  MSM SoC has chipidea USB controller.  This driver uses
+	  ci13xxx_udc core.
+	  This driver depends on OTG driver for PHY initialization,
+	  clock management, powering up VBUS, and power management.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "ci13xxx_msm" and force all
+	  gadget drivers to also be dynamically linked.
+
+config USB_CI13XXX_MSM
+	tristate
+	depends on USB_GADGET_CI13XXX_MSM
+	default USB_GADGET
+	select USB_GADGET_SELECTED
 
 #
 # LAST -- dummy/emulated controller
@@ -685,6 +741,19 @@ config USB_ETH_EEM
          If you say "y" here, the Ethernet gadget driver will use the EEM
          protocol rather than ECM.  If unsure, say "n".
 
+config USB_G_NCM
+	tristate "Network Control Model (NCM) support"
+	depends on NET
+	select CRC32
+	help
+	  This driver implements USB CDC NCM subclass standard. NCM is
+	  an advanced protocol for Ethernet encapsulation, allows grouping
+	  of several ethernet frames into one USB transfer and diffferent
+	  alignment possibilities.
+
+	  Say "y" to link the driver statically, or "m" to build a
+	  dynamically linked module called "g_ncm".
+
 config USB_GADGETFS
 	tristate "Gadget Filesystem (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 5780db42417..55f5e8ae592 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -21,9 +21,13 @@ fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
-obj-$(CONFIG_USB_CI13XXX)	+= ci13xxx_udc.o
+obj-$(CONFIG_USB_CI13XXX_PCI)	+= ci13xxx_pci.o
 obj-$(CONFIG_USB_S3C_HSOTG)	+= s3c-hsotg.o
 obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
+obj-$(CONFIG_USB_EG20T)		+= pch_udc.o
+obj-$(CONFIG_USB_PXA_U2O)	+= mv_udc.o
+mv_udc-y			:= mv_udc_core.o mv_udc_phy.o
+obj-$(CONFIG_USB_CI13XXX_MSM)	+= ci13xxx_msm.o
 
 #
 # USB gadget drivers
@@ -43,6 +47,7 @@ g_hid-y				:= hid.o
 g_dbgp-y			:= dbgp.o
 g_nokia-y			:= nokia.o
 g_webcam-y			:= webcam.o
+g_ncm-y				:= ncm.o
 
 obj-$(CONFIG_USB_ZERO)		+= g_zero.o
 obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
@@ -60,3 +65,4 @@ obj-$(CONFIG_USB_G_DBGP)	+= g_dbgp.o
 obj-$(CONFIG_USB_G_MULTI)	+= g_multi.o
 obj-$(CONFIG_USB_G_NOKIA)	+= g_nokia.o
 obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
+obj-$(CONFIG_USB_G_NCM)		+= g_ncm.o
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 9034e034472..f8dd7269d79 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3359,7 +3359,6 @@ static int udc_probe(struct udc *dev)
 	dev_set_name(&dev->gadget.dev, "gadget");
 	dev->gadget.dev.release = gadget_release;
 	dev->gadget.name = name;
-	dev->gadget.name = name;
 	dev->gadget.is_dualspeed = 1;
 
 	/* init registers, interrupts, ... */
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index b5e20e873cb..e7c65a4408f 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -2017,7 +2017,7 @@ static int __init usba_udc_probe(struct platform_device *pdev)
 			}
 		} else {
 			/* gpio_request fail so use -EINVAL for gpio_is_valid */
-			ubc->vbus_pin = -EINVAL;
+			udc->vbus_pin = -EINVAL;
 		}
 	}
 
@@ -2057,8 +2057,10 @@ static int __exit usba_udc_remove(struct platform_device *pdev)
 		usba_ep_cleanup_debugfs(&usba_ep[i]);
 	usba_cleanup_debugfs(udc);
 
-	if (gpio_is_valid(udc->vbus_pin))
+	if (gpio_is_valid(udc->vbus_pin)) {
+		free_irq(gpio_to_irq(udc->vbus_pin), udc);
 		gpio_free(udc->vbus_pin);
+	}
 
 	free_irq(udc->irq, udc);
 	kfree(usba_ep);
diff --git a/drivers/usb/gadget/ci13xxx_msm.c b/drivers/usb/gadget/ci13xxx_msm.c
new file mode 100644
index 00000000000..139ac941959
--- /dev/null
+++ b/drivers/usb/gadget/ci13xxx_msm.c
@@ -0,0 +1,134 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/msm_hsusb_hw.h>
+#include <linux/usb/ulpi.h>
+
+#include "ci13xxx_udc.c"
+
+#define MSM_USB_BASE	(udc->regs)
+
+static irqreturn_t msm_udc_irq(int irq, void *data)
+{
+	return udc_irq();
+}
+
+static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
+{
+	struct device *dev = udc->gadget.dev.parent;
+	int val;
+
+	switch (event) {
+	case CI13XXX_CONTROLLER_RESET_EVENT:
+		dev_dbg(dev, "CI13XXX_CONTROLLER_RESET_EVENT received\n");
+		writel(0, USB_AHBBURST);
+		writel(0, USB_AHBMODE);
+		break;
+	case CI13XXX_CONTROLLER_STOPPED_EVENT:
+		dev_dbg(dev, "CI13XXX_CONTROLLER_STOPPED_EVENT received\n");
+		/*
+		 * Put the transceiver in non-driving mode. Otherwise host
+		 * may not detect soft-disconnection.
+		 */
+		val = otg_io_read(udc->transceiver, ULPI_FUNC_CTRL);
+		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
+		val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
+		otg_io_write(udc->transceiver, val, ULPI_FUNC_CTRL);
+		break;
+	default:
+		dev_dbg(dev, "unknown ci13xxx_udc event\n");
+		break;
+	}
+}
+
+static struct ci13xxx_udc_driver ci13xxx_msm_udc_driver = {
+	.name			= "ci13xxx_msm",
+	.flags			= CI13XXX_REGS_SHARED |
+				  CI13XXX_REQUIRE_TRANSCEIVER |
+				  CI13XXX_PULLUP_ON_VBUS |
+				  CI13XXX_DISABLE_STREAMING,
+
+	.notify_event		= ci13xxx_msm_notify_event,
+};
+
+static int ci13xxx_msm_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	void __iomem *regs;
+	int irq;
+	int ret;
+
+	dev_dbg(&pdev->dev, "ci13xxx_msm_probe\n");
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get platform resource mem\n");
+		return -ENXIO;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		return -ENOMEM;
+	}
+
+	ret = udc_probe(&ci13xxx_msm_udc_driver, &pdev->dev, regs);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "udc_probe failed\n");
+		goto iounmap;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "IRQ not found\n");
+		ret = -ENXIO;
+		goto udc_remove;
+	}
+
+	ret = request_irq(irq, msm_udc_irq, IRQF_SHARED, pdev->name, pdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "request_irq failed\n");
+		goto udc_remove;
+	}
+
+	pm_runtime_no_callbacks(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+udc_remove:
+	udc_remove();
+iounmap:
+	iounmap(regs);
+
+	return ret;
+}
+
+static struct platform_driver ci13xxx_msm_driver = {
+	.probe = ci13xxx_msm_probe,
+	.driver = { .name = "msm_hsusb", },
+};
+
+static int __init ci13xxx_msm_init(void)
+{
+	return platform_driver_register(&ci13xxx_msm_driver);
+}
+module_init(ci13xxx_msm_init);
diff --git a/drivers/usb/gadget/ci13xxx_pci.c b/drivers/usb/gadget/ci13xxx_pci.c
new file mode 100644
index 00000000000..883ab5e832d
--- /dev/null
+++ b/drivers/usb/gadget/ci13xxx_pci.c
@@ -0,0 +1,176 @@
+/*
+ * ci13xxx_pci.c - MIPS USB IP core family device controller
+ *
+ * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
+ *
+ * Author: David Lopo
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "ci13xxx_udc.c"
+
+/* driver name */
+#define UDC_DRIVER_NAME   "ci13xxx_pci"
+
+/******************************************************************************
+ * PCI block
+ *****************************************************************************/
+/**
+ * ci13xxx_pci_irq: interrut handler
+ * @irq:  irq number
+ * @pdev: USB Device Controller interrupt source
+ *
+ * This function returns IRQ_HANDLED if the IRQ has been handled
+ * This is an ISR don't trace, use attribute interface instead
+ */
+static irqreturn_t ci13xxx_pci_irq(int irq, void *pdev)
+{
+	if (irq == 0) {
+		dev_err(&((struct pci_dev *)pdev)->dev, "Invalid IRQ0 usage!");
+		return IRQ_HANDLED;
+	}
+	return udc_irq();
+}
+
+static struct ci13xxx_udc_driver ci13xxx_pci_udc_driver = {
+	.name		= UDC_DRIVER_NAME,
+};
+
+/**
+ * ci13xxx_pci_probe: PCI probe
+ * @pdev: USB device controller being probed
+ * @id:   PCI hotplug ID connecting controller to UDC framework
+ *
+ * This function returns an error code
+ * Allocates basic PCI resources for this USB device controller, and then
+ * invokes the udc_probe() method to start the UDC associated with it
+ */
+static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
+				       const struct pci_device_id *id)
+{
+	void __iomem *regs = NULL;
+	int retval = 0;
+
+	if (id == NULL)
+		return -EINVAL;
+
+	retval = pci_enable_device(pdev);
+	if (retval)
+		goto done;
+
+	if (!pdev->irq) {
+		dev_err(&pdev->dev, "No IRQ, check BIOS/PCI setup!");
+		retval = -ENODEV;
+		goto disable_device;
+	}
+
+	retval = pci_request_regions(pdev, UDC_DRIVER_NAME);
+	if (retval)
+		goto disable_device;
+
+	/* BAR 0 holds all the registers */
+	regs = pci_iomap(pdev, 0, 0);
+	if (!regs) {
+		dev_err(&pdev->dev, "Error mapping memory!");
+		retval = -EFAULT;
+		goto release_regions;
+	}
+	pci_set_drvdata(pdev, (__force void *)regs);
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	retval = udc_probe(&ci13xxx_pci_udc_driver, &pdev->dev, regs);
+	if (retval)
+		goto iounmap;
+
+	/* our device does not have MSI capability */
+
+	retval = request_irq(pdev->irq, ci13xxx_pci_irq, IRQF_SHARED,
+			     UDC_DRIVER_NAME, pdev);
+	if (retval)
+		goto gadget_remove;
+
+	return 0;
+
+ gadget_remove:
+	udc_remove();
+ iounmap:
+	pci_iounmap(pdev, regs);
+ release_regions:
+	pci_release_regions(pdev);
+ disable_device:
+	pci_disable_device(pdev);
+ done:
+	return retval;
+}
+
+/**
+ * ci13xxx_pci_remove: PCI remove
+ * @pdev: USB Device Controller being removed
+ *
+ * Reverses the effect of ci13xxx_pci_probe(),
+ * first invoking the udc_remove() and then releases
+ * all PCI resources allocated for this USB device controller
+ */
+static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
+{
+	free_irq(pdev->irq, pdev);
+	udc_remove();
+	pci_iounmap(pdev, (__force void __iomem *)pci_get_drvdata(pdev));
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+/**
+ * PCI device table
+ * PCI device structure
+ *
+ * Check "pci.h" for details
+ */
+static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = {
+	{ PCI_DEVICE(0x153F, 0x1004) },
+	{ PCI_DEVICE(0x153F, 0x1006) },
+	{ 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table);
+
+static struct pci_driver ci13xxx_pci_driver = {
+	.name         =	UDC_DRIVER_NAME,
+	.id_table     =	ci13xxx_pci_id_table,
+	.probe        =	ci13xxx_pci_probe,
+	.remove       =	__devexit_p(ci13xxx_pci_remove),
+};
+
+/**
+ * ci13xxx_pci_init: module init
+ *
+ * Driver load
+ */
+static int __init ci13xxx_pci_init(void)
+{
+	return pci_register_driver(&ci13xxx_pci_driver);
+}
+module_init(ci13xxx_pci_init);
+
+/**
+ * ci13xxx_pci_exit: module exit
+ *
+ * Driver unload
+ */
+static void __exit ci13xxx_pci_exit(void)
+{
+	pci_unregister_driver(&ci13xxx_pci_driver);
+}
+module_exit(ci13xxx_pci_exit);
+
+MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>");
+MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("June 2008");
diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 98b36fc88c7..31656a2b4ab 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -22,7 +22,6 @@
  * - ENDPT:  endpoint operations (Gadget API)
  * - GADGET: gadget operations (Gadget API)
  * - BUS:    bus glue code, bus abstraction layer
- * - PCI:    PCI core interface and PCI resources (interrupts, memory...)
  *
  * Compile Options
  * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
@@ -60,11 +59,11 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
 
 #include "ci13xxx_udc.h"
 
@@ -75,9 +74,6 @@
 /* ctrl register bank access */
 static DEFINE_SPINLOCK(udc_lock);
 
-/* driver name */
-#define UDC_DRIVER_NAME   "ci13xxx_udc"
-
 /* control endpoint description */
 static const struct usb_endpoint_descriptor
 ctrl_endpt_desc = {
@@ -132,6 +128,9 @@ static struct {
 	size_t        size;   /* bank size */
 } hw_bank;
 
+/* MSM specific */
+#define ABS_AHBBURST        (0x0090UL)
+#define ABS_AHBMODE         (0x0098UL)
 /* UDC register map */
 #define ABS_CAPLENGTH       (0x100UL)
 #define ABS_HCCPARAMS       (0x108UL)
@@ -248,13 +247,7 @@ static u32 hw_ctest_and_write(u32 addr, u32 mask, u32 data)
 	return (reg & mask) >> ffs_nr(mask);
 }
 
-/**
- * hw_device_reset: resets chip (execute without interruption)
- * @base: register base address
- *
- * This function returns an error code
- */
-static int hw_device_reset(void __iomem *base)
+static int hw_device_init(void __iomem *base)
 {
 	u32 reg;
 
@@ -271,6 +264,28 @@ static int hw_device_reset(void __iomem *base)
 	hw_bank.size += CAP_LAST;
 	hw_bank.size /= sizeof(u32);
 
+	reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN);
+	if (reg == 0 || reg > ENDPT_MAX)
+		return -ENODEV;
+
+	hw_ep_max = reg;   /* cache hw ENDPT_MAX */
+
+	/* setup lock mode ? */
+
+	/* ENDPTSETUPSTAT is '0' by default */
+
+	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
+
+	return 0;
+}
+/**
+ * hw_device_reset: resets chip (execute without interruption)
+ * @base: register base address
+ *
+ * This function returns an error code
+ */
+static int hw_device_reset(struct ci13xxx *udc)
+{
 	/* should flush & stop before reset */
 	hw_cwrite(CAP_ENDPTFLUSH, ~0, ~0);
 	hw_cwrite(CAP_USBCMD, USBCMD_RS, 0);
@@ -279,6 +294,14 @@ static int hw_device_reset(void __iomem *base)
 	while (hw_cread(CAP_USBCMD, USBCMD_RST))
 		udelay(10);             /* not RTOS friendly */
 
+
+	if (udc->udc_driver->notify_event)
+		udc->udc_driver->notify_event(udc,
+			CI13XXX_CONTROLLER_RESET_EVENT);
+
+	if (udc->udc_driver->flags && CI13XXX_DISABLE_STREAMING)
+		hw_cwrite(CAP_USBMODE, USBMODE_SDIS, USBMODE_SDIS);
+
 	/* USBMODE should be configured step by step */
 	hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
 	hw_cwrite(CAP_USBMODE, USBMODE_CM, USBMODE_CM_DEVICE);
@@ -290,18 +313,6 @@ static int hw_device_reset(void __iomem *base)
 		return -ENODEV;
 	}
 
-	reg = hw_aread(ABS_DCCPARAMS, DCCPARAMS_DEN) >> ffs_nr(DCCPARAMS_DEN);
-	if (reg == 0 || reg > ENDPT_MAX)
-		return -ENODEV;
-
-	hw_ep_max = reg;   /* cache hw ENDPT_MAX */
-
-	/* setup lock mode ? */
-
-	/* ENDPTSETUPSTAT is '0' by default */
-
-	/* HCSPARAMS.bf.ppc SHOULD BE zero for device */
-
 	return 0;
 }
 
@@ -1449,7 +1460,7 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq)
 	mReq->ptr->page[0]  = mReq->req.dma;
 	for (i = 1; i < 5; i++)
 		mReq->ptr->page[i] =
-			(mReq->req.dma + i * PAGE_SIZE) & ~TD_RESERVED_MASK;
+			(mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK;
 
 	/*
 	 *  QH configuration
@@ -1540,7 +1551,7 @@ __acquires(mEp->lock)
 		list_del_init(&mReq->queue);
 		mReq->req.status = -ESHUTDOWN;
 
-		if (!mReq->req.no_interrupt && mReq->req.complete != NULL) {
+		if (mReq->req.complete != NULL) {
 			spin_unlock(mEp->lock);
 			mReq->req.complete(&mEp->ep, &mReq->req);
 			spin_lock(mEp->lock);
@@ -1557,8 +1568,6 @@ __acquires(mEp->lock)
  * Caller must hold lock
  */
 static int _gadget_stop_activity(struct usb_gadget *gadget)
-__releases(udc->lock)
-__acquires(udc->lock)
 {
 	struct usb_ep *ep;
 	struct ci13xxx    *udc = container_of(gadget, struct ci13xxx, gadget);
@@ -1570,8 +1579,6 @@ __acquires(udc->lock)
 	if (gadget == NULL)
 		return -EINVAL;
 
-	spin_unlock(udc->lock);
-
 	/* flush all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_fifo_flush(ep);
@@ -1591,8 +1598,6 @@ __acquires(udc->lock)
 		mEp->status = NULL;
 	}
 
-	spin_lock(udc->lock);
-
 	return 0;
 }
 
@@ -1621,6 +1626,7 @@ __acquires(udc->lock)
 
 	dbg_event(0xFF, "BUS RST", 0);
 
+	spin_unlock(udc->lock);
 	retval = _gadget_stop_activity(&udc->gadget);
 	if (retval)
 		goto done;
@@ -1629,10 +1635,9 @@ __acquires(udc->lock)
 	if (retval)
 		goto done;
 
-	spin_unlock(udc->lock);
 	retval = usb_ep_enable(&mEp->ep, &ctrl_endpt_desc);
 	if (!retval) {
-		mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_KERNEL);
+		mEp->status = usb_ep_alloc_request(&mEp->ep, GFP_ATOMIC);
 		if (mEp->status == NULL) {
 			usb_ep_disable(&mEp->ep);
 			retval = -ENOMEM;
@@ -1789,18 +1794,20 @@ __acquires(mEp->lock)
 
 	dbg_done(_usb_addr(mEp), mReq->ptr->token, retval);
 
-	if (!mReq->req.no_interrupt && mReq->req.complete != NULL) {
+	if (!list_empty(&mEp->qh[mEp->dir].queue)) {
+		struct ci13xxx_req* mReqEnq;
+
+		mReqEnq = list_entry(mEp->qh[mEp->dir].queue.next,
+				  struct ci13xxx_req, queue);
+		_hardware_enqueue(mEp, mReqEnq);
+	}
+
+	if (mReq->req.complete != NULL) {
 		spin_unlock(mEp->lock);
 		mReq->req.complete(&mEp->ep, &mReq->req);
 		spin_lock(mEp->lock);
 	}
 
-	if (!list_empty(&mEp->qh[mEp->dir].queue)) {
-		mReq = list_entry(mEp->qh[mEp->dir].queue.next,
-				  struct ci13xxx_req, queue);
-		_hardware_enqueue(mEp, mReq);
-	}
-
  done:
 	return retval;
 }
@@ -2061,7 +2068,6 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 {
 	struct ci13xxx_ep  *mEp  = container_of(ep, struct ci13xxx_ep, ep);
 	struct ci13xxx_req *mReq = NULL;
-	unsigned long flags;
 
 	trace("%p, %i", ep, gfp_flags);
 
@@ -2070,8 +2076,6 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 		return NULL;
 	}
 
-	spin_lock_irqsave(mEp->lock, flags);
-
 	mReq = kzalloc(sizeof(struct ci13xxx_req), gfp_flags);
 	if (mReq != NULL) {
 		INIT_LIST_HEAD(&mReq->queue);
@@ -2086,8 +2090,6 @@ static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 
 	dbg_event(_usb_addr(mEp), "ALLOC", mReq == NULL);
 
-	spin_unlock_irqrestore(mEp->lock, flags);
-
 	return (mReq == NULL) ? NULL : &mReq->req;
 }
 
@@ -2157,8 +2159,8 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 		goto done;
 	}
 
-	if (req->length > (4 * PAGE_SIZE)) {
-		req->length = (4 * PAGE_SIZE);
+	if (req->length > (4 * CI13XXX_PAGE_SIZE)) {
+		req->length = (4 * CI13XXX_PAGE_SIZE);
 		retval = -EMSGSIZE;
 		warn("request length truncated");
 	}
@@ -2170,8 +2172,10 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 	mReq->req.actual = 0;
 	list_add_tail(&mReq->queue, &mEp->qh[mEp->dir].queue);
 
-	retval = _hardware_enqueue(mEp, mReq);
-	if (retval == -EALREADY || retval == -EBUSY) {
+	if (list_is_singular(&mEp->qh[mEp->dir].queue))
+		retval = _hardware_enqueue(mEp, mReq);
+
+	if (retval == -EALREADY) {
 		dbg_event(_usb_addr(mEp), "QUEUE", retval);
 		retval = 0;
 	}
@@ -2209,7 +2213,7 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 	list_del_init(&mReq->queue);
 	req->status = -ECONNRESET;
 
-	if (!mReq->req.no_interrupt && mReq->req.complete != NULL) {
+	if (mReq->req.complete != NULL) {
 		spin_unlock(mEp->lock);
 		mReq->req.complete(&mEp->ep, &mReq->req);
 		spin_lock(mEp->lock);
@@ -2332,12 +2336,47 @@ static const struct usb_ep_ops usb_ep_ops = {
 /******************************************************************************
  * GADGET block
  *****************************************************************************/
+static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
+{
+	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
+	unsigned long flags;
+	int gadget_ready = 0;
+
+	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS))
+		return -EOPNOTSUPP;
+
+	spin_lock_irqsave(udc->lock, flags);
+	udc->vbus_active = is_active;
+	if (udc->driver)
+		gadget_ready = 1;
+	spin_unlock_irqrestore(udc->lock, flags);
+
+	if (gadget_ready) {
+		if (is_active) {
+			pm_runtime_get_sync(&_gadget->dev);
+			hw_device_reset(udc);
+			hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma);
+		} else {
+			hw_device_state(0);
+			if (udc->udc_driver->notify_event)
+				udc->udc_driver->notify_event(udc,
+				CI13XXX_CONTROLLER_STOPPED_EVENT);
+			_gadget_stop_activity(&udc->gadget);
+			pm_runtime_put_sync(&_gadget->dev);
+		}
+	}
+
+	return 0;
+}
+
 /**
  * Device operations part of the API to the USB controller hardware,
  * which don't involve endpoints (or i/o)
  * Check  "usb_gadget.h" for details
  */
-static const struct usb_gadget_ops usb_gadget_ops;
+static const struct usb_gadget_ops usb_gadget_ops = {
+	.vbus_session	= ci13xxx_vbus_session,
+};
 
 /**
  * usb_gadget_probe_driver: register a gadget driver
@@ -2358,7 +2397,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	if (driver             == NULL ||
 	    bind               == NULL ||
-	    driver->unbind     == NULL ||
 	    driver->setup      == NULL ||
 	    driver->disconnect == NULL ||
 	    driver->suspend    == NULL ||
@@ -2372,13 +2410,13 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	/* alloc resources */
 	udc->qh_pool = dma_pool_create("ci13xxx_qh", &udc->gadget.dev,
 				       sizeof(struct ci13xxx_qh),
-				       64, PAGE_SIZE);
+				       64, CI13XXX_PAGE_SIZE);
 	if (udc->qh_pool == NULL)
 		return -ENOMEM;
 
 	udc->td_pool = dma_pool_create("ci13xxx_td", &udc->gadget.dev,
 				       sizeof(struct ci13xxx_td),
-				       64, PAGE_SIZE);
+				       64, CI13XXX_PAGE_SIZE);
 	if (udc->td_pool == NULL) {
 		dma_pool_destroy(udc->qh_pool);
 		udc->qh_pool = NULL;
@@ -2390,7 +2428,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	info("hw_ep_max = %d", hw_ep_max);
 
 	udc->driver = driver;
-	udc->gadget.ops        = NULL;
 	udc->gadget.dev.driver = NULL;
 
 	retval = 0;
@@ -2410,9 +2447,11 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		/* this allocation cannot be random */
 		for (k = RX; k <= TX; k++) {
 			INIT_LIST_HEAD(&mEp->qh[k].queue);
+			spin_unlock_irqrestore(udc->lock, flags);
 			mEp->qh[k].ptr = dma_pool_alloc(udc->qh_pool,
 							GFP_KERNEL,
 							&mEp->qh[k].dma);
+			spin_lock_irqsave(udc->lock, flags);
 			if (mEp->qh[k].ptr == NULL)
 				retval = -ENOMEM;
 			else
@@ -2429,7 +2468,6 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 
 	/* bind gadget */
 	driver->driver.bus     = NULL;
-	udc->gadget.ops        = &usb_gadget_ops;
 	udc->gadget.dev.driver = &driver->driver;
 
 	spin_unlock_irqrestore(udc->lock, flags);
@@ -2437,12 +2475,24 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	spin_lock_irqsave(udc->lock, flags);
 
 	if (retval) {
-		udc->gadget.ops        = NULL;
 		udc->gadget.dev.driver = NULL;
 		goto done;
 	}
 
+	pm_runtime_get_sync(&udc->gadget.dev);
+	if (udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) {
+		if (udc->vbus_active) {
+			if (udc->udc_driver->flags & CI13XXX_REGS_SHARED)
+				hw_device_reset(udc);
+		} else {
+			pm_runtime_put_sync(&udc->gadget.dev);
+			goto done;
+		}
+	}
+
 	retval = hw_device_state(udc->ci13xxx_ep[0].qh[RX].dma);
+	if (retval)
+		pm_runtime_put_sync(&udc->gadget.dev);
 
  done:
 	spin_unlock_irqrestore(udc->lock, flags);
@@ -2475,19 +2525,22 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
 	spin_lock_irqsave(udc->lock, flags);
 
-	hw_device_state(0);
-
-	/* unbind gadget */
-	if (udc->gadget.ops != NULL) {
+	if (!(udc->udc_driver->flags & CI13XXX_PULLUP_ON_VBUS) ||
+			udc->vbus_active) {
+		hw_device_state(0);
+		if (udc->udc_driver->notify_event)
+			udc->udc_driver->notify_event(udc,
+			CI13XXX_CONTROLLER_STOPPED_EVENT);
 		_gadget_stop_activity(&udc->gadget);
+		pm_runtime_put(&udc->gadget.dev);
+	}
 
-		spin_unlock_irqrestore(udc->lock, flags);
-		driver->unbind(&udc->gadget);               /* MAY SLEEP */
-		spin_lock_irqsave(udc->lock, flags);
+	/* unbind gadget */
+	spin_unlock_irqrestore(udc->lock, flags);
+	driver->unbind(&udc->gadget);               /* MAY SLEEP */
+	spin_lock_irqsave(udc->lock, flags);
 
-		udc->gadget.ops        = NULL;
-		udc->gadget.dev.driver = NULL;
-	}
+	udc->gadget.dev.driver = NULL;
 
 	/* free resources */
 	for (i = 0; i < hw_ep_max; i++) {
@@ -2544,6 +2597,14 @@ static irqreturn_t udc_irq(void)
 	}
 
 	spin_lock(udc->lock);
+
+	if (udc->udc_driver->flags & CI13XXX_REGS_SHARED) {
+		if (hw_cread(CAP_USBMODE, USBMODE_CM) !=
+				USBMODE_CM_DEVICE) {
+			spin_unlock(udc->lock);
+			return IRQ_NONE;
+		}
+	}
 	intr = hw_test_and_clear_intr_active();
 	if (intr) {
 		isr_statistics.hndl.buf[isr_statistics.hndl.idx++] = intr;
@@ -2602,14 +2663,16 @@ static void udc_release(struct device *dev)
  * No interrupts active, the IRQ has not been requested yet
  * Kernel assumes 32-bit DMA operations by default, no need to dma_set_mask
  */
-static int udc_probe(struct device *dev, void __iomem *regs, const char *name)
+static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
+		void __iomem *regs)
 {
 	struct ci13xxx *udc;
 	int retval = 0;
 
 	trace("%p, %p, %p", dev, regs, name);
 
-	if (dev == NULL || regs == NULL || name == NULL)
+	if (dev == NULL || regs == NULL || driver == NULL ||
+			driver->name == NULL)
 		return -EINVAL;
 
 	udc = kzalloc(sizeof(struct ci13xxx), GFP_KERNEL);
@@ -2617,42 +2680,77 @@ static int udc_probe(struct device *dev, void __iomem *regs, const char *name)
 		return -ENOMEM;
 
 	udc->lock = &udc_lock;
+	udc->regs = regs;
+	udc->udc_driver = driver;
 
-	retval = hw_device_reset(regs);
-	if (retval)
-		goto done;
-
-	udc->gadget.ops          = NULL;
+	udc->gadget.ops          = &usb_gadget_ops;
 	udc->gadget.speed        = USB_SPEED_UNKNOWN;
 	udc->gadget.is_dualspeed = 1;
 	udc->gadget.is_otg       = 0;
-	udc->gadget.name         = name;
+	udc->gadget.name         = driver->name;
 
 	INIT_LIST_HEAD(&udc->gadget.ep_list);
 	udc->gadget.ep0 = NULL;
 
 	dev_set_name(&udc->gadget.dev, "gadget");
 	udc->gadget.dev.dma_mask = dev->dma_mask;
+	udc->gadget.dev.coherent_dma_mask = dev->coherent_dma_mask;
 	udc->gadget.dev.parent   = dev;
 	udc->gadget.dev.release  = udc_release;
 
+	retval = hw_device_init(regs);
+	if (retval < 0)
+		goto free_udc;
+
+	udc->transceiver = otg_get_transceiver();
+
+	if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
+		if (udc->transceiver == NULL) {
+			retval = -ENODEV;
+			goto free_udc;
+		}
+	}
+
+	if (!(udc->udc_driver->flags & CI13XXX_REGS_SHARED)) {
+		retval = hw_device_reset(udc);
+		if (retval)
+			goto put_transceiver;
+	}
+
 	retval = device_register(&udc->gadget.dev);
-	if (retval)
-		goto done;
+	if (retval) {
+		put_device(&udc->gadget.dev);
+		goto put_transceiver;
+	}
 
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
 	retval = dbg_create_files(&udc->gadget.dev);
 #endif
-	if (retval) {
-		device_unregister(&udc->gadget.dev);
-		goto done;
+	if (retval)
+		goto unreg_device;
+
+	if (udc->transceiver) {
+		retval = otg_set_peripheral(udc->transceiver, &udc->gadget);
+		if (retval)
+			goto remove_dbg;
 	}
+	pm_runtime_no_callbacks(&udc->gadget.dev);
+	pm_runtime_enable(&udc->gadget.dev);
 
 	_udc = udc;
 	return retval;
 
- done:
 	err("error = %i", retval);
+remove_dbg:
+#ifdef CONFIG_USB_GADGET_DEBUG_FILES
+	dbg_remove_files(&udc->gadget.dev);
+#endif
+unreg_device:
+	device_unregister(&udc->gadget.dev);
+put_transceiver:
+	if (udc->transceiver)
+		otg_put_transceiver(udc->transceiver);
+free_udc:
 	kfree(udc);
 	_udc = NULL;
 	return retval;
@@ -2672,6 +2770,10 @@ static void udc_remove(void)
 		return;
 	}
 
+	if (udc->transceiver) {
+		otg_set_peripheral(udc->transceiver, &udc->gadget);
+		otg_put_transceiver(udc->transceiver);
+	}
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
 	dbg_remove_files(&udc->gadget.dev);
 #endif
@@ -2680,156 +2782,3 @@ static void udc_remove(void)
 	kfree(udc);
 	_udc = NULL;
 }
-
-/******************************************************************************
- * PCI block
- *****************************************************************************/
-/**
- * ci13xxx_pci_irq: interrut handler
- * @irq:  irq number
- * @pdev: USB Device Controller interrupt source
- *
- * This function returns IRQ_HANDLED if the IRQ has been handled
- * This is an ISR don't trace, use attribute interface instead
- */
-static irqreturn_t ci13xxx_pci_irq(int irq, void *pdev)
-{
-	if (irq == 0) {
-		dev_err(&((struct pci_dev *)pdev)->dev, "Invalid IRQ0 usage!");
-		return IRQ_HANDLED;
-	}
-	return udc_irq();
-}
-
-/**
- * ci13xxx_pci_probe: PCI probe
- * @pdev: USB device controller being probed
- * @id:   PCI hotplug ID connecting controller to UDC framework
- *
- * This function returns an error code
- * Allocates basic PCI resources for this USB device controller, and then
- * invokes the udc_probe() method to start the UDC associated with it
- */
-static int __devinit ci13xxx_pci_probe(struct pci_dev *pdev,
-				       const struct pci_device_id *id)
-{
-	void __iomem *regs = NULL;
-	int retval = 0;
-
-	if (id == NULL)
-		return -EINVAL;
-
-	retval = pci_enable_device(pdev);
-	if (retval)
-		goto done;
-
-	if (!pdev->irq) {
-		dev_err(&pdev->dev, "No IRQ, check BIOS/PCI setup!");
-		retval = -ENODEV;
-		goto disable_device;
-	}
-
-	retval = pci_request_regions(pdev, UDC_DRIVER_NAME);
-	if (retval)
-		goto disable_device;
-
-	/* BAR 0 holds all the registers */
-	regs = pci_iomap(pdev, 0, 0);
-	if (!regs) {
-		dev_err(&pdev->dev, "Error mapping memory!");
-		retval = -EFAULT;
-		goto release_regions;
-	}
-	pci_set_drvdata(pdev, (__force void *)regs);
-
-	pci_set_master(pdev);
-	pci_try_set_mwi(pdev);
-
-	retval = udc_probe(&pdev->dev, regs, UDC_DRIVER_NAME);
-	if (retval)
-		goto iounmap;
-
-	/* our device does not have MSI capability */
-
-	retval = request_irq(pdev->irq, ci13xxx_pci_irq, IRQF_SHARED,
-			     UDC_DRIVER_NAME, pdev);
-	if (retval)
-		goto gadget_remove;
-
-	return 0;
-
- gadget_remove:
-	udc_remove();
- iounmap:
-	pci_iounmap(pdev, regs);
- release_regions:
-	pci_release_regions(pdev);
- disable_device:
-	pci_disable_device(pdev);
- done:
-	return retval;
-}
-
-/**
- * ci13xxx_pci_remove: PCI remove
- * @pdev: USB Device Controller being removed
- *
- * Reverses the effect of ci13xxx_pci_probe(),
- * first invoking the udc_remove() and then releases
- * all PCI resources allocated for this USB device controller
- */
-static void __devexit ci13xxx_pci_remove(struct pci_dev *pdev)
-{
-	free_irq(pdev->irq, pdev);
-	udc_remove();
-	pci_iounmap(pdev, (__force void __iomem *)pci_get_drvdata(pdev));
-	pci_release_regions(pdev);
-	pci_disable_device(pdev);
-}
-
-/**
- * PCI device table
- * PCI device structure
- *
- * Check "pci.h" for details
- */
-static DEFINE_PCI_DEVICE_TABLE(ci13xxx_pci_id_table) = {
-	{ PCI_DEVICE(0x153F, 0x1004) },
-	{ PCI_DEVICE(0x153F, 0x1006) },
-	{ 0, 0, 0, 0, 0, 0, 0 /* end: all zeroes */ }
-};
-MODULE_DEVICE_TABLE(pci, ci13xxx_pci_id_table);
-
-static struct pci_driver ci13xxx_pci_driver = {
-	.name         =	UDC_DRIVER_NAME,
-	.id_table     =	ci13xxx_pci_id_table,
-	.probe        =	ci13xxx_pci_probe,
-	.remove       =	__devexit_p(ci13xxx_pci_remove),
-};
-
-/**
- * ci13xxx_pci_init: module init
- *
- * Driver load
- */
-static int __init ci13xxx_pci_init(void)
-{
-	return pci_register_driver(&ci13xxx_pci_driver);
-}
-module_init(ci13xxx_pci_init);
-
-/**
- * ci13xxx_pci_exit: module exit
- *
- * Driver unload
- */
-static void __exit ci13xxx_pci_exit(void)
-{
-	pci_unregister_driver(&ci13xxx_pci_driver);
-}
-module_exit(ci13xxx_pci_exit);
-
-MODULE_AUTHOR("MIPS - David Lopo <dlopo@chipidea.mips.com>");
-MODULE_DESCRIPTION("MIPS CI13XXX USB Peripheral Controller");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("June 2008");
diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h
index 4026e9cede3..f61fed07f76 100644
--- a/drivers/usb/gadget/ci13xxx_udc.h
+++ b/drivers/usb/gadget/ci13xxx_udc.h
@@ -19,6 +19,7 @@
 /******************************************************************************
  * DEFINE
  *****************************************************************************/
+#define CI13XXX_PAGE_SIZE  4096ul /* page size for TD's */
 #define ENDPT_MAX          (16)
 #define CTRL_PAYLOAD_MAX   (64)
 #define RX        (0)  /* similar to USB_DIR_OUT but can be used as an index */
@@ -97,9 +98,24 @@ struct ci13xxx_ep {
 	struct dma_pool                       *td_pool;
 };
 
+struct ci13xxx;
+struct ci13xxx_udc_driver {
+	const char	*name;
+	unsigned long	 flags;
+#define CI13XXX_REGS_SHARED		BIT(0)
+#define CI13XXX_REQUIRE_TRANSCEIVER	BIT(1)
+#define CI13XXX_PULLUP_ON_VBUS		BIT(2)
+#define CI13XXX_DISABLE_STREAMING	BIT(3)
+
+#define CI13XXX_CONTROLLER_RESET_EVENT		0
+#define CI13XXX_CONTROLLER_STOPPED_EVENT	1
+	void	(*notify_event) (struct ci13xxx *udc, unsigned event);
+};
+
 /* CI13XXX UDC descriptor & global resources */
 struct ci13xxx {
 	spinlock_t		  *lock;      /* ctrl register bank access */
+	void __iomem              *regs;      /* registers address space */
 
 	struct dma_pool           *qh_pool;   /* DMA pool for queue heads */
 	struct dma_pool           *td_pool;   /* DMA pool for transfer descs */
@@ -108,6 +124,9 @@ struct ci13xxx {
 	struct ci13xxx_ep          ci13xxx_ep[ENDPT_MAX]; /* extended endpts */
 
 	struct usb_gadget_driver  *driver;     /* 3rd party gadget driver */
+	struct ci13xxx_udc_driver *udc_driver; /* device controller driver */
+	int                        vbus_active; /* is VBUS active */
+	struct otg_transceiver    *transceiver; /* Transceiver struct */
 };
 
 /******************************************************************************
@@ -157,6 +176,7 @@ struct ci13xxx {
 #define    USBMODE_CM_DEVICE  (0x02UL <<  0)
 #define    USBMODE_CM_HOST    (0x03UL <<  0)
 #define USBMODE_SLOM          BIT(3)
+#define USBMODE_SDIS          BIT(4)
 
 /* ENDPTCTRL */
 #define ENDPTCTRL_RXS         BIT(0)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 7b5cc16e4a0..f6ff8456d52 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1047,9 +1047,9 @@ composite_unbind(struct usb_gadget *gadget)
 		kfree(cdev->req->buf);
 		usb_ep_free_request(gadget->ep0, cdev->req);
 	}
+	device_remove_file(&gadget->dev, &dev_attr_suspended);
 	kfree(cdev);
 	set_gadget_data(gadget, NULL);
-	device_remove_file(&gadget->dev, &dev_attr_suspended);
 	composite = NULL;
 }
 
@@ -1107,14 +1107,6 @@ static int composite_bind(struct usb_gadget *gadget)
 	 */
 	usb_ep_autoconfig_reset(cdev->gadget);
 
-	/* standardized runtime overrides for device ID data */
-	if (idVendor)
-		cdev->desc.idVendor = cpu_to_le16(idVendor);
-	if (idProduct)
-		cdev->desc.idProduct = cpu_to_le16(idProduct);
-	if (bcdDevice)
-		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
-
 	/* composite gadget needs to assign strings for whole device (like
 	 * serial number), register function drivers, potentially update
 	 * power state and consumption, etc
@@ -1126,7 +1118,15 @@ static int composite_bind(struct usb_gadget *gadget)
 	cdev->desc = *composite->dev;
 	cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
 
-	/* stirng overrides */
+	/* standardized runtime overrides for device ID data */
+	if (idVendor)
+		cdev->desc.idVendor = cpu_to_le16(idVendor);
+	if (idProduct)
+		cdev->desc.idProduct = cpu_to_le16(idProduct);
+	if (bcdDevice)
+		cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
+
+	/* string overrides */
 	if (iManufacturer || !cdev->desc.iManufacturer) {
 		if (!iManufacturer && !composite->iManufacturer &&
 		    !*composite_manufacturer)
@@ -1188,6 +1188,8 @@ composite_suspend(struct usb_gadget *gadget)
 		composite->suspend(cdev);
 
 	cdev->suspended = 1;
+
+	usb_gadget_vbus_draw(gadget, 2);
 }
 
 static void
@@ -1195,6 +1197,7 @@ composite_resume(struct usb_gadget *gadget)
 {
 	struct usb_composite_dev	*cdev = get_gadget_data(gadget);
 	struct usb_function		*f;
+	u8				maxpower;
 
 	/* REVISIT:  should we have config level
 	 * suspend/resume callbacks?
@@ -1207,6 +1210,11 @@ composite_resume(struct usb_gadget *gadget)
 			if (f->resume)
 				f->resume(f);
 		}
+
+		maxpower = cdev->config->bMaxPower;
+
+		usb_gadget_vbus_draw(gadget, maxpower ?
+			(2 * maxpower) : CONFIG_USB_GADGET_VBUS_DRAW);
 	}
 
 	cdev->suspended = 0;
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 1d2a2abbfa8..13b9f47feec 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1197,6 +1197,139 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
 #define Ep_Request	(USB_TYPE_STANDARD | USB_RECIP_ENDPOINT)
 #define Ep_InRequest	(Ep_Request | USB_DIR_IN)
 
+
+/**
+ * handle_control_request() - handles all control transfers
+ * @dum: pointer to dummy (the_controller)
+ * @urb: the urb request to handle
+ * @setup: pointer to the setup data for a USB device control
+ *	 request
+ * @status: pointer to request handling status
+ *
+ * Return 0 - if the request was handled
+ *	  1 - if the request wasn't handles
+ *	  error code on error
+ */
+static int handle_control_request(struct dummy *dum, struct urb *urb,
+				  struct usb_ctrlrequest *setup,
+				  int *status)
+{
+	struct dummy_ep		*ep2;
+	int			ret_val = 1;
+	unsigned	w_index;
+	unsigned	w_value;
+
+	w_index = le16_to_cpu(setup->wIndex);
+	w_value = le16_to_cpu(setup->wValue);
+	switch (setup->bRequest) {
+	case USB_REQ_SET_ADDRESS:
+		if (setup->bRequestType != Dev_Request)
+			break;
+		dum->address = w_value;
+		*status = 0;
+		dev_dbg(udc_dev(dum), "set_address = %d\n",
+				w_value);
+		ret_val = 0;
+		break;
+	case USB_REQ_SET_FEATURE:
+		if (setup->bRequestType == Dev_Request) {
+			ret_val = 0;
+			switch (w_value) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				break;
+			case USB_DEVICE_B_HNP_ENABLE:
+				dum->gadget.b_hnp_enable = 1;
+				break;
+			case USB_DEVICE_A_HNP_SUPPORT:
+				dum->gadget.a_hnp_support = 1;
+				break;
+			case USB_DEVICE_A_ALT_HNP_SUPPORT:
+				dum->gadget.a_alt_hnp_support = 1;
+				break;
+			default:
+				ret_val = -EOPNOTSUPP;
+			}
+			if (ret_val == 0) {
+				dum->devstatus |= (1 << w_value);
+				*status = 0;
+			}
+		} else if (setup->bRequestType == Ep_Request) {
+			/* endpoint halt */
+			ep2 = find_endpoint(dum, w_index);
+			if (!ep2 || ep2->ep.name == ep0name) {
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			ep2->halted = 1;
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	case USB_REQ_CLEAR_FEATURE:
+		if (setup->bRequestType == Dev_Request) {
+			ret_val = 0;
+			switch (w_value) {
+			case USB_DEVICE_REMOTE_WAKEUP:
+				w_value = USB_DEVICE_REMOTE_WAKEUP;
+				break;
+			default:
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			if (ret_val == 0) {
+				dum->devstatus &= ~(1 << w_value);
+				*status = 0;
+			}
+		} else if (setup->bRequestType == Ep_Request) {
+			/* endpoint halt */
+			ep2 = find_endpoint(dum, w_index);
+			if (!ep2) {
+				ret_val = -EOPNOTSUPP;
+				break;
+			}
+			if (!ep2->wedged)
+				ep2->halted = 0;
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	case USB_REQ_GET_STATUS:
+		if (setup->bRequestType == Dev_InRequest
+				|| setup->bRequestType == Intf_InRequest
+				|| setup->bRequestType == Ep_InRequest) {
+			char *buf;
+			/*
+			 * device: remote wakeup, selfpowered
+			 * interface: nothing
+			 * endpoint: halt
+			 */
+			buf = (char *)urb->transfer_buffer;
+			if (urb->transfer_buffer_length > 0) {
+				if (setup->bRequestType == Ep_InRequest) {
+					ep2 = find_endpoint(dum, w_index);
+					if (!ep2) {
+						ret_val = -EOPNOTSUPP;
+						break;
+					}
+					buf[0] = ep2->halted;
+				} else if (setup->bRequestType ==
+					   Dev_InRequest) {
+					buf[0] = (u8)dum->devstatus;
+				} else
+					buf[0] = 0;
+			}
+			if (urb->transfer_buffer_length > 1)
+				buf[1] = 0;
+			urb->actual_length = min_t(u32, 2,
+				urb->transfer_buffer_length);
+			ret_val = 0;
+			*status = 0;
+		}
+		break;
+	}
+	return ret_val;
+}
+
 /* drive both sides of the transfers; looks like irq handlers to
  * both drivers except the callbacks aren't in_irq().
  */
@@ -1299,14 +1432,8 @@ restart:
 		if (ep == &dum->ep [0] && ep->setup_stage) {
 			struct usb_ctrlrequest		setup;
 			int				value = 1;
-			struct dummy_ep			*ep2;
-			unsigned			w_index;
-			unsigned			w_value;
 
 			setup = *(struct usb_ctrlrequest*) urb->setup_packet;
-			w_index = le16_to_cpu(setup.wIndex);
-			w_value = le16_to_cpu(setup.wValue);
-
 			/* paranoia, in case of stale queued data */
 			list_for_each_entry (req, &ep->queue, queue) {
 				list_del_init (&req->queue);
@@ -1328,117 +1455,9 @@ restart:
 			ep->last_io = jiffies;
 			ep->setup_stage = 0;
 			ep->halted = 0;
-			switch (setup.bRequest) {
-			case USB_REQ_SET_ADDRESS:
-				if (setup.bRequestType != Dev_Request)
-					break;
-				dum->address = w_value;
-				status = 0;
-				dev_dbg (udc_dev(dum), "set_address = %d\n",
-						w_value);
-				value = 0;
-				break;
-			case USB_REQ_SET_FEATURE:
-				if (setup.bRequestType == Dev_Request) {
-					value = 0;
-					switch (w_value) {
-					case USB_DEVICE_REMOTE_WAKEUP:
-						break;
-					case USB_DEVICE_B_HNP_ENABLE:
-						dum->gadget.b_hnp_enable = 1;
-						break;
-					case USB_DEVICE_A_HNP_SUPPORT:
-						dum->gadget.a_hnp_support = 1;
-						break;
-					case USB_DEVICE_A_ALT_HNP_SUPPORT:
-						dum->gadget.a_alt_hnp_support
-							= 1;
-						break;
-					default:
-						value = -EOPNOTSUPP;
-					}
-					if (value == 0) {
-						dum->devstatus |=
-							(1 << w_value);
-						status = 0;
-					}
 
-				} else if (setup.bRequestType == Ep_Request) {
-					// endpoint halt
-					ep2 = find_endpoint (dum, w_index);
-					if (!ep2 || ep2->ep.name == ep0name) {
-						value = -EOPNOTSUPP;
-						break;
-					}
-					ep2->halted = 1;
-					value = 0;
-					status = 0;
-				}
-				break;
-			case USB_REQ_CLEAR_FEATURE:
-				if (setup.bRequestType == Dev_Request) {
-					switch (w_value) {
-					case USB_DEVICE_REMOTE_WAKEUP:
-						dum->devstatus &= ~(1 <<
-							USB_DEVICE_REMOTE_WAKEUP);
-						value = 0;
-						status = 0;
-						break;
-					default:
-						value = -EOPNOTSUPP;
-						break;
-					}
-				} else if (setup.bRequestType == Ep_Request) {
-					// endpoint halt
-					ep2 = find_endpoint (dum, w_index);
-					if (!ep2) {
-						value = -EOPNOTSUPP;
-						break;
-					}
-					if (!ep2->wedged)
-						ep2->halted = 0;
-					value = 0;
-					status = 0;
-				}
-				break;
-			case USB_REQ_GET_STATUS:
-				if (setup.bRequestType == Dev_InRequest
-						|| setup.bRequestType
-							== Intf_InRequest
-						|| setup.bRequestType
-							== Ep_InRequest
-						) {
-					char *buf;
-
-					// device: remote wakeup, selfpowered
-					// interface: nothing
-					// endpoint: halt
-					buf = (char *)urb->transfer_buffer;
-					if (urb->transfer_buffer_length > 0) {
-						if (setup.bRequestType ==
-								Ep_InRequest) {
-	ep2 = find_endpoint (dum, w_index);
-	if (!ep2) {
-		value = -EOPNOTSUPP;
-		break;
-	}
-	buf [0] = ep2->halted;
-						} else if (setup.bRequestType ==
-								Dev_InRequest) {
-							buf [0] = (u8)
-								dum->devstatus;
-						} else
-							buf [0] = 0;
-					}
-					if (urb->transfer_buffer_length > 1)
-						buf [1] = 0;
-					urb->actual_length = min_t(u32, 2,
-						urb->transfer_buffer_length);
-					value = 0;
-					status = 0;
-				}
-				break;
-			}
+			value = handle_control_request(dum, urb, &setup,
+						       &status);
 
 			/* gadget driver handles all other requests.  block
 			 * until setup() returns; no reentrancy issues etc.
diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c
index 4a830df4fc3..1499f9e4afa 100644
--- a/drivers/usb/gadget/f_fs.c
+++ b/drivers/usb/gadget/f_fs.c
@@ -1,10 +1,10 @@
 /*
- * f_fs.c -- user mode filesystem api for usb composite funtcion controllers
+ * f_fs.c -- user mode file system API for USB composite function controllers
  *
  * Copyright (C) 2010 Samsung Electronics
  * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
  *
- * Based on inode.c (GadgetFS):
+ * Based on inode.c (GadgetFS) which was:
  * Copyright (C) 2003-2004 David Brownell
  * Copyright (C) 2003 Agilent Technologies
  *
@@ -30,7 +30,6 @@
 #include <linux/blkdev.h>
 #include <linux/pagemap.h>
 #include <asm/unaligned.h>
-#include <linux/smp_lock.h>
 
 #include <linux/usb/composite.h>
 #include <linux/usb/functionfs.h>
@@ -39,62 +38,56 @@
 #define FUNCTIONFS_MAGIC	0xa647361 /* Chosen by a honest dice roll ;) */
 
 
-/* Debuging *****************************************************************/
-
-#define ffs_printk(level, fmt, args...) printk(level "f_fs: " fmt "\n", ## args)
-
-#define FERR(...)  ffs_printk(KERN_ERR,  __VA_ARGS__)
-#define FINFO(...) ffs_printk(KERN_INFO, __VA_ARGS__)
-
-#ifdef DEBUG
-#  define FDBG(...) ffs_printk(KERN_DEBUG, __VA_ARGS__)
-#else
-#  define FDBG(...) do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE_DEBUG
-#  define FVDBG FDBG
-#else
-#  define FVDBG(...) do { } while (0)
-#endif /* VERBOSE_DEBUG */
-
-#define ENTER()    FVDBG("%s()", __func__)
+/* Debugging ****************************************************************/
 
 #ifdef VERBOSE_DEBUG
+#  define pr_vdebug pr_debug
 #  define ffs_dump_mem(prefix, ptr, len) \
-	print_hex_dump_bytes("f_fs" prefix ": ", DUMP_PREFIX_NONE, ptr, len)
+	print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len)
 #else
+#  define pr_vdebug(...)                 do { } while (0)
 #  define ffs_dump_mem(prefix, ptr, len) do { } while (0)
-#endif
+#endif /* VERBOSE_DEBUG */
+
+#define ENTER()    pr_vdebug("%s()\n", __func__)
 
 
 /* The data structure and setup file ****************************************/
 
 enum ffs_state {
-	/* Waiting for descriptors and strings. */
-	/* In this state no open(2), read(2) or write(2) on epfiles
+	/*
+	 * Waiting for descriptors and strings.
+	 *
+	 * In this state no open(2), read(2) or write(2) on epfiles
 	 * may succeed (which should not be the problem as there
-	 * should be no such files opened in the firts place). */
+	 * should be no such files opened in the first place).
+	 */
 	FFS_READ_DESCRIPTORS,
 	FFS_READ_STRINGS,
 
-	/* We've got descriptors and strings.  We are or have called
+	/*
+	 * We've got descriptors and strings.  We are or have called
 	 * functionfs_ready_callback().  functionfs_bind() may have
-	 * been called but we don't know. */
-	/* This is the only state in which operations on epfiles may
-	 * succeed. */
+	 * been called but we don't know.
+	 *
+	 * This is the only state in which operations on epfiles may
+	 * succeed.
+	 */
 	FFS_ACTIVE,
 
-	/* All endpoints have been closed.  This state is also set if
+	/*
+	 * All endpoints have been closed.  This state is also set if
 	 * we encounter an unrecoverable error.  The only
 	 * unrecoverable error is situation when after reading strings
-	 * from user space we fail to initialise EP files or
-	 * functionfs_ready_callback() returns with error (<0). */
-	/* In this state no open(2), read(2) or write(2) (both on ep0
+	 * from user space we fail to initialise epfiles or
+	 * functionfs_ready_callback() returns with error (<0).
+	 *
+	 * In this state no open(2), read(2) or write(2) (both on ep0
 	 * as well as epfile) may succeed (at this point epfiles are
 	 * unlinked and all closed so this is not a problem; ep0 is
 	 * also closed but ep0 file exists and so open(2) on ep0 must
-	 * fail). */
+	 * fail).
+	 */
 	FFS_CLOSING
 };
 
@@ -102,14 +95,18 @@ enum ffs_state {
 enum ffs_setup_state {
 	/* There is no setup request pending. */
 	FFS_NO_SETUP,
-	/* User has read events and there was a setup request event
+	/*
+	 * User has read events and there was a setup request event
 	 * there.  The next read/write on ep0 will handle the
-	 * request. */
+	 * request.
+	 */
 	FFS_SETUP_PENDING,
-	/* There was event pending but before user space handled it
+	/*
+	 * There was event pending but before user space handled it
 	 * some other event was introduced which canceled existing
 	 * setup.  If this state is set read/write on ep0 return
-	 * -EIDRM.  This state is only set when adding event. */
+	 * -EIDRM.  This state is only set when adding event.
+	 */
 	FFS_SETUP_CANCELED
 };
 
@@ -121,23 +118,29 @@ struct ffs_function;
 struct ffs_data {
 	struct usb_gadget		*gadget;
 
-	/* Protect access read/write operations, only one read/write
+	/*
+	 * Protect access read/write operations, only one read/write
 	 * at a time.  As a consequence protects ep0req and company.
 	 * While setup request is being processed (queued) this is
-	 * held. */
+	 * held.
+	 */
 	struct mutex			mutex;
 
-	/* Protect access to enpoint related structures (basically
+	/*
+	 * Protect access to endpoint related structures (basically
 	 * usb_ep_queue(), usb_ep_dequeue(), etc. calls) except for
-	 * endpint zero. */
+	 * endpoint zero.
+	 */
 	spinlock_t			eps_lock;
 
-	/* XXX REVISIT do we need our own request? Since we are not
-	 * handling setup requests immidiatelly user space may be so
+	/*
+	 * XXX REVISIT do we need our own request? Since we are not
+	 * handling setup requests immediately user space may be so
 	 * slow that another setup will be sent to the gadget but this
 	 * time not to us but another function and then there could be
 	 * a race.  Is that the case? Or maybe we can use cdev->req
-	 * after all, maybe we just need some spinlock for that? */
+	 * after all, maybe we just need some spinlock for that?
+	 */
 	struct usb_request		*ep0req;		/* P: mutex */
 	struct completion		ep0req_completion;	/* P: mutex */
 	int				ep0req_status;		/* P: mutex */
@@ -151,7 +154,7 @@ struct ffs_data {
 	enum ffs_state			state;
 
 	/*
-	 * Possible transations:
+	 * Possible transitions:
 	 * + FFS_NO_SETUP       -> FFS_SETUP_PENDING  -- P: ev.waitq.lock
 	 *               happens only in ep0 read which is P: mutex
 	 * + FFS_SETUP_PENDING  -> FFS_NO_SETUP       -- P: ev.waitq.lock
@@ -184,18 +187,21 @@ struct ffs_data {
 	/* Active function */
 	struct ffs_function		*func;
 
-	/* Device name, write once when file system is mounted.
-	 * Intendet for user to read if she wants. */
+	/*
+	 * Device name, write once when file system is mounted.
+	 * Intended for user to read if she wants.
+	 */
 	const char			*dev_name;
-	/* Private data for our user (ie. gadget).  Managed by
-	 * user. */
+	/* Private data for our user (ie. gadget).  Managed by user. */
 	void				*private_data;
 
 	/* filled by __ffs_data_got_descs() */
-	/* real descriptors are 16 bytes after raw_descs (so you need
+	/*
+	 * Real descriptors are 16 bytes after raw_descs (so you need
 	 * to skip 16 bytes (ie. ffs->raw_descs + 16) to get to the
 	 * first full speed descriptor).  raw_descs_length and
-	 * raw_fs_descs_length do not have those 16 bytes added. */
+	 * raw_fs_descs_length do not have those 16 bytes added.
+	 */
 	const void			*raw_descs;
 	unsigned			raw_descs_length;
 	unsigned			raw_fs_descs_length;
@@ -212,18 +218,23 @@ struct ffs_data {
 	const void			*raw_strings;
 	struct usb_gadget_strings	**stringtabs;
 
-	/* File system's super block, write once when file system is mounted. */
+	/*
+	 * File system's super block, write once when file system is
+	 * mounted.
+	 */
 	struct super_block		*sb;
 
-	/* File permissions, written once when fs is mounted*/
+	/* File permissions, written once when fs is mounted */
 	struct ffs_file_perms {
 		umode_t				mode;
 		uid_t				uid;
 		gid_t				gid;
 	}				file_perms;
 
-	/* The endpoint files, filled by ffs_epfiles_create(),
-	 * destroyed by ffs_epfiles_destroy(). */
+	/*
+	 * The endpoint files, filled by ffs_epfiles_create(),
+	 * destroyed by ffs_epfiles_destroy().
+	 */
 	struct ffs_epfile		*epfiles;
 };
 
@@ -237,7 +248,7 @@ static struct ffs_data *__must_check ffs_data_new(void) __attribute__((malloc));
 static void ffs_data_opened(struct ffs_data *ffs);
 static void ffs_data_closed(struct ffs_data *ffs);
 
-/* Called with ffs->mutex held; take over ownerrship of data. */
+/* Called with ffs->mutex held; take over ownership of data. */
 static int __must_check
 __ffs_data_got_descs(struct ffs_data *ffs, char *data, size_t len);
 static int __must_check
@@ -268,11 +279,9 @@ static struct ffs_function *ffs_func_from_usb(struct usb_function *f)
 
 static void ffs_func_free(struct ffs_function *func);
 
-
 static void ffs_func_eps_disable(struct ffs_function *func);
 static int __must_check ffs_func_eps_enable(struct ffs_function *func);
 
-
 static int ffs_func_bind(struct usb_configuration *,
 			 struct usb_function *);
 static void ffs_func_unbind(struct usb_configuration *,
@@ -289,7 +298,6 @@ static int ffs_func_revmap_ep(struct ffs_function *func, u8 num);
 static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf);
 
 
-
 /* The endpoints structures *************************************************/
 
 struct ffs_ep {
@@ -322,7 +330,6 @@ struct ffs_epfile {
 	unsigned char			_pad;
 };
 
-
 static int  __must_check ffs_epfiles_create(struct ffs_data *ffs);
 static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count);
 
@@ -349,7 +356,6 @@ static void ffs_ep0_complete(struct usb_ep *ep, struct usb_request *req)
 	complete_all(&ffs->ep0req_completion);
 }
 
-
 static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len)
 {
 	struct usb_request *req = ffs->ep0req;
@@ -381,17 +387,16 @@ static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len)
 static int __ffs_ep0_stall(struct ffs_data *ffs)
 {
 	if (ffs->ev.can_stall) {
-		FVDBG("ep0 stall\n");
+		pr_vdebug("ep0 stall\n");
 		usb_ep_set_halt(ffs->gadget->ep0);
 		ffs->setup_state = FFS_NO_SETUP;
 		return -EL2HLT;
 	} else {
-		FDBG("bogus ep0 stall!\n");
+		pr_debug("bogus ep0 stall!\n");
 		return -ESRCH;
 	}
 }
 
-
 static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 			     size_t len, loff_t *ptr)
 {
@@ -410,7 +415,6 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 	if (unlikely(ret < 0))
 		return ret;
 
-
 	/* Check state */
 	switch (ffs->state) {
 	case FFS_READ_DESCRIPTORS:
@@ -422,14 +426,14 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 		}
 
 		data = ffs_prepare_buffer(buf, len);
-		if (unlikely(IS_ERR(data))) {
+		if (IS_ERR(data)) {
 			ret = PTR_ERR(data);
 			break;
 		}
 
 		/* Handle data */
 		if (ffs->state == FFS_READ_DESCRIPTORS) {
-			FINFO("read descriptors");
+			pr_info("read descriptors\n");
 			ret = __ffs_data_got_descs(ffs, data, len);
 			if (unlikely(ret < 0))
 				break;
@@ -437,7 +441,7 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 			ffs->state = FFS_READ_STRINGS;
 			ret = len;
 		} else {
-			FINFO("read strings");
+			pr_info("read strings\n");
 			ret = __ffs_data_got_strings(ffs, data, len);
 			if (unlikely(ret < 0))
 				break;
@@ -462,11 +466,12 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 		}
 		break;
 
-
 	case FFS_ACTIVE:
 		data = NULL;
-		/* We're called from user space, we can use _irq
-		 * rather then _irqsave */
+		/*
+		 * We're called from user space, we can use _irq
+		 * rather then _irqsave
+		 */
 		spin_lock_irq(&ffs->ev.waitq.lock);
 		switch (FFS_SETUP_STATE(ffs)) {
 		case FFS_SETUP_CANCELED:
@@ -494,23 +499,25 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf,
 		spin_unlock_irq(&ffs->ev.waitq.lock);
 
 		data = ffs_prepare_buffer(buf, len);
-		if (unlikely(IS_ERR(data))) {
+		if (IS_ERR(data)) {
 			ret = PTR_ERR(data);
 			break;
 		}
 
 		spin_lock_irq(&ffs->ev.waitq.lock);
 
-		/* We are guaranteed to be still in FFS_ACTIVE state
+		/*
+		 * We are guaranteed to be still in FFS_ACTIVE state
 		 * but the state of setup could have changed from
 		 * FFS_SETUP_PENDING to FFS_SETUP_CANCELED so we need
 		 * to check for that.  If that happened we copied data
-		 * from user space in vain but it's unlikely. */
-		/* For sure we are not in FFS_NO_SETUP since this is
+		 * from user space in vain but it's unlikely.
+		 *
+		 * For sure we are not in FFS_NO_SETUP since this is
 		 * the only place FFS_SETUP_PENDING -> FFS_NO_SETUP
 		 * transition can be performed and it's protected by
-		 * mutex. */
-
+		 * mutex.
+		 */
 		if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) {
 			ret = -EIDRM;
 done_spin:
@@ -522,25 +529,22 @@ done_spin:
 		kfree(data);
 		break;
 
-
 	default:
 		ret = -EBADFD;
 		break;
 	}
 
-
 	mutex_unlock(&ffs->mutex);
 	return ret;
 }
 
-
-
 static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf,
 				     size_t n)
 {
-	/* We are holding ffs->ev.waitq.lock and ffs->mutex and we need
-	 * to release them. */
-
+	/*
+	 * We are holding ffs->ev.waitq.lock and ffs->mutex and we need
+	 * to release them.
+	 */
 	struct usb_functionfs_event events[n];
 	unsigned i = 0;
 
@@ -569,7 +573,6 @@ static ssize_t __ffs_ep0_read_events(struct ffs_data *ffs, char __user *buf,
 		? -EFAULT : sizeof events;
 }
 
-
 static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 			    size_t len, loff_t *ptr)
 {
@@ -589,16 +592,16 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 	if (unlikely(ret < 0))
 		return ret;
 
-
 	/* Check state */
 	if (ffs->state != FFS_ACTIVE) {
 		ret = -EBADFD;
 		goto done_mutex;
 	}
 
-
-	/* We're called from user space, we can use _irq rather then
-	 * _irqsave */
+	/*
+	 * We're called from user space, we can use _irq rather then
+	 * _irqsave
+	 */
 	spin_lock_irq(&ffs->ev.waitq.lock);
 
 	switch (FFS_SETUP_STATE(ffs)) {
@@ -618,7 +621,8 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 			break;
 		}
 
-		if (unlikely(wait_event_interruptible_exclusive_locked_irq(ffs->ev.waitq, ffs->ev.count))) {
+		if (wait_event_interruptible_exclusive_locked_irq(ffs->ev.waitq,
+							ffs->ev.count)) {
 			ret = -EINTR;
 			break;
 		}
@@ -626,7 +630,6 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf,
 		return __ffs_ep0_read_events(ffs, buf,
 					     min(n, (size_t)ffs->ev.count));
 
-
 	case FFS_SETUP_PENDING:
 		if (ffs->ev.setup.bRequestType & USB_DIR_IN) {
 			spin_unlock_irq(&ffs->ev.waitq.lock);
@@ -672,8 +675,6 @@ done_mutex:
 	return ret;
 }
 
-
-
 static int ffs_ep0_open(struct inode *inode, struct file *file)
 {
 	struct ffs_data *ffs = inode->i_private;
@@ -689,7 +690,6 @@ static int ffs_ep0_open(struct inode *inode, struct file *file)
 	return 0;
 }
 
-
 static int ffs_ep0_release(struct inode *inode, struct file *file)
 {
 	struct ffs_data *ffs = file->private_data;
@@ -701,7 +701,6 @@ static int ffs_ep0_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-
 static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
 {
 	struct ffs_data *ffs = file->private_data;
@@ -722,7 +721,6 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value)
 	return ret;
 }
 
-
 static const struct file_operations ffs_ep0_operations = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
@@ -737,7 +735,6 @@ static const struct file_operations ffs_ep0_operations = {
 
 /* "Normal" endpoints operations ********************************************/
 
-
 static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req)
 {
 	ENTER();
@@ -748,7 +745,6 @@ static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req)
 	}
 }
 
-
 static ssize_t ffs_epfile_io(struct file *file,
 			     char __user *buf, size_t len, int read)
 {
@@ -778,8 +774,8 @@ first_try:
 				goto error;
 			}
 
-			if (unlikely(wait_event_interruptible
-				     (epfile->wait, (ep = epfile->ep)))) {
+			if (wait_event_interruptible(epfile->wait,
+						     (ep = epfile->ep))) {
 				ret = -EINTR;
 				goto error;
 			}
@@ -811,12 +807,16 @@ first_try:
 		if (unlikely(ret))
 			goto error;
 
-		/* We're called from user space, we can use _irq rather then
-		 * _irqsave */
+		/*
+		 * We're called from user space, we can use _irq rather then
+		 * _irqsave
+		 */
 		spin_lock_irq(&epfile->ffs->eps_lock);
 
-		/* While we were acquiring mutex endpoint got disabled
-		 * or changed? */
+		/*
+		 * While we were acquiring mutex endpoint got disabled
+		 * or changed?
+		 */
 	} while (unlikely(epfile->ep != ep));
 
 	/* Halt */
@@ -858,7 +858,6 @@ error:
 	return ret;
 }
 
-
 static ssize_t
 ffs_epfile_write(struct file *file, const char __user *buf, size_t len,
 		 loff_t *ptr)
@@ -904,7 +903,6 @@ ffs_epfile_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-
 static long ffs_epfile_ioctl(struct file *file, unsigned code,
 			     unsigned long value)
 {
@@ -943,7 +941,6 @@ static long ffs_epfile_ioctl(struct file *file, unsigned code,
 	return ret;
 }
 
-
 static const struct file_operations ffs_epfile_operations = {
 	.owner =	THIS_MODULE,
 	.llseek =	no_llseek,
@@ -956,15 +953,13 @@ static const struct file_operations ffs_epfile_operations = {
 };
 
 
-
 /* File system and super block operations ***********************************/
 
 /*
- * Mounting the filesystem creates a controller file, used first for
+ * Mounting the file system creates a controller file, used first for
  * function configuration then later for event monitoring.
  */
 
-
 static struct inode *__must_check
 ffs_sb_make_inode(struct super_block *sb, void *data,
 		  const struct file_operations *fops,
@@ -997,9 +992,7 @@ ffs_sb_make_inode(struct super_block *sb, void *data,
 	return inode;
 }
 
-
 /* Create "regular" file */
-
 static struct inode *ffs_sb_create_file(struct super_block *sb,
 					const char *name, void *data,
 					const struct file_operations *fops,
@@ -1028,9 +1021,7 @@ static struct inode *ffs_sb_create_file(struct super_block *sb,
 	return inode;
 }
 
-
 /* Super block */
-
 static const struct super_operations ffs_sb_operations = {
 	.statfs =	simple_statfs,
 	.drop_inode =	generic_delete_inode,
@@ -1051,7 +1042,7 @@ static int ffs_sb_fill(struct super_block *sb, void *_data, int silent)
 
 	ENTER();
 
-	/* Initialize data */
+	/* Initialise data */
 	ffs = ffs_data_new();
 	if (unlikely(!ffs))
 		goto enomem0;
@@ -1097,7 +1088,6 @@ enomem0:
 	return -ENOMEM;
 }
 
-
 static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
 {
 	ENTER();
@@ -1117,7 +1107,7 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
 		/* Value limit */
 		eq = strchr(opts, '=');
 		if (unlikely(!eq)) {
-			FERR("'=' missing in %s", opts);
+			pr_err("'=' missing in %s\n", opts);
 			return -EINVAL;
 		}
 		*eq = 0;
@@ -1125,7 +1115,7 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
 		/* Parse value */
 		value = simple_strtoul(eq + 1, &end, 0);
 		if (unlikely(*end != ',' && *end != 0)) {
-			FERR("%s: invalid value: %s", opts, eq + 1);
+			pr_err("%s: invalid value: %s\n", opts, eq + 1);
 			return -EINVAL;
 		}
 
@@ -1160,7 +1150,7 @@ static int ffs_fs_parse_opts(struct ffs_sb_fill_data *data, char *opts)
 
 		default:
 invalid:
-			FERR("%s: invalid option", opts);
+			pr_err("%s: invalid option\n", opts);
 			return -EINVAL;
 		}
 
@@ -1173,7 +1163,6 @@ invalid:
 	return 0;
 }
 
-
 /* "mount -t functionfs dev_name /dev/function" ends up here */
 
 static struct dentry *
@@ -1225,10 +1214,8 @@ static struct file_system_type ffs_fs_type = {
 };
 
 
-
 /* Driver's main init/cleanup functions *************************************/
 
-
 static int functionfs_init(void)
 {
 	int ret;
@@ -1237,9 +1224,9 @@ static int functionfs_init(void)
 
 	ret = register_filesystem(&ffs_fs_type);
 	if (likely(!ret))
-		FINFO("file system registered");
+		pr_info("file system registered\n");
 	else
-		FERR("failed registering file system (%d)", ret);
+		pr_err("failed registering file system (%d)\n", ret);
 
 	return ret;
 }
@@ -1248,18 +1235,16 @@ static void functionfs_cleanup(void)
 {
 	ENTER();
 
-	FINFO("unloading");
+	pr_info("unloading\n");
 	unregister_filesystem(&ffs_fs_type);
 }
 
 
-
 /* ffs_data and ffs_function construction and destruction code **************/
 
 static void ffs_data_clear(struct ffs_data *ffs);
 static void ffs_data_reset(struct ffs_data *ffs);
 
-
 static void ffs_data_get(struct ffs_data *ffs)
 {
 	ENTER();
@@ -1280,7 +1265,7 @@ static void ffs_data_put(struct ffs_data *ffs)
 	ENTER();
 
 	if (unlikely(atomic_dec_and_test(&ffs->ref))) {
-		FINFO("%s(): freeing", __func__);
+		pr_info("%s(): freeing\n", __func__);
 		ffs_data_clear(ffs);
 		BUG_ON(mutex_is_locked(&ffs->mutex) ||
 		       spin_is_locked(&ffs->ev.waitq.lock) ||
@@ -1290,8 +1275,6 @@ static void ffs_data_put(struct ffs_data *ffs)
 	}
 }
 
-
-
 static void ffs_data_closed(struct ffs_data *ffs)
 {
 	ENTER();
@@ -1304,7 +1287,6 @@ static void ffs_data_closed(struct ffs_data *ffs)
 	ffs_data_put(ffs);
 }
 
-
 static struct ffs_data *ffs_data_new(void)
 {
 	struct ffs_data *ffs = kzalloc(sizeof *ffs, GFP_KERNEL);
@@ -1327,7 +1309,6 @@ static struct ffs_data *ffs_data_new(void)
 	return ffs;
 }
 
-
 static void ffs_data_clear(struct ffs_data *ffs)
 {
 	ENTER();
@@ -1345,7 +1326,6 @@ static void ffs_data_clear(struct ffs_data *ffs)
 	kfree(ffs->stringtabs);
 }
 
-
 static void ffs_data_reset(struct ffs_data *ffs)
 {
 	ENTER();
@@ -1408,7 +1388,6 @@ static int functionfs_bind(struct ffs_data *ffs, struct usb_composite_dev *cdev)
 	return 0;
 }
 
-
 static void functionfs_unbind(struct ffs_data *ffs)
 {
 	ENTER();
@@ -1421,7 +1400,6 @@ static void functionfs_unbind(struct ffs_data *ffs)
 	}
 }
 
-
 static int ffs_epfiles_create(struct ffs_data *ffs)
 {
 	struct ffs_epfile *epfile, *epfiles;
@@ -1452,7 +1430,6 @@ static int ffs_epfiles_create(struct ffs_data *ffs)
 	return 0;
 }
 
-
 static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
 {
 	struct ffs_epfile *epfile = epfiles;
@@ -1472,7 +1449,6 @@ static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count)
 	kfree(epfiles);
 }
 
-
 static int functionfs_bind_config(struct usb_composite_dev *cdev,
 				  struct usb_configuration *c,
 				  struct ffs_data *ffs)
@@ -1492,7 +1468,6 @@ static int functionfs_bind_config(struct usb_composite_dev *cdev,
 	func->function.bind    = ffs_func_bind;
 	func->function.unbind  = ffs_func_unbind;
 	func->function.set_alt = ffs_func_set_alt;
-	/*func->function.get_alt = ffs_func_get_alt;*/
 	func->function.disable = ffs_func_disable;
 	func->function.setup   = ffs_func_setup;
 	func->function.suspend = ffs_func_suspend;
@@ -1517,14 +1492,15 @@ static void ffs_func_free(struct ffs_function *func)
 	ffs_data_put(func->ffs);
 
 	kfree(func->eps);
-	/* eps and interfaces_nums are allocated in the same chunk so
+	/*
+	 * eps and interfaces_nums are allocated in the same chunk so
 	 * only one free is required.  Descriptors are also allocated
-	 * in the same chunk. */
+	 * in the same chunk.
+	 */
 
 	kfree(func);
 }
 
-
 static void ffs_func_eps_disable(struct ffs_function *func)
 {
 	struct ffs_ep *ep         = func->eps;
@@ -1582,11 +1558,12 @@ static int ffs_func_eps_enable(struct ffs_function *func)
 
 /* Parsing and building descriptors and strings *****************************/
 
-
-/* This validates if data pointed by data is a valid USB descriptor as
+/*
+ * This validates if data pointed by data is a valid USB descriptor as
  * well as record how many interfaces, endpoints and strings are
- * required by given configuration.  Returns address afther the
- * descriptor or NULL if data is invalid. */
+ * required by given configuration.  Returns address after the
+ * descriptor or NULL if data is invalid.
+ */
 
 enum ffs_entity_type {
 	FFS_DESCRIPTOR, FFS_INTERFACE, FFS_STRING, FFS_ENDPOINT
@@ -1608,14 +1585,14 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 
 	/* At least two bytes are required: length and type */
 	if (len < 2) {
-		FVDBG("descriptor too short");
+		pr_vdebug("descriptor too short\n");
 		return -EINVAL;
 	}
 
 	/* If we have at least as many bytes as the descriptor takes? */
 	length = _ds->bLength;
 	if (len < length) {
-		FVDBG("descriptor longer then available data");
+		pr_vdebug("descriptor longer then available data\n");
 		return -EINVAL;
 	}
 
@@ -1623,15 +1600,15 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 #define __entity_check_STRING(val)     (val)
 #define __entity_check_ENDPOINT(val)   ((val) & USB_ENDPOINT_NUMBER_MASK)
 #define __entity(type, val) do {					\
-		FVDBG("entity " #type "(%02x)", (val));			\
+		pr_vdebug("entity " #type "(%02x)\n", (val));		\
 		if (unlikely(!__entity_check_ ##type(val))) {		\
-			FVDBG("invalid entity's value");		\
+			pr_vdebug("invalid entity's value\n");		\
 			return -EINVAL;					\
 		}							\
 		ret = entity(FFS_ ##type, &val, _ds, priv);		\
 		if (unlikely(ret < 0)) {				\
-			FDBG("entity " #type "(%02x); ret = %d",	\
-			     (val), ret);				\
+			pr_debug("entity " #type "(%02x); ret = %d\n",	\
+				 (val), ret);				\
 			return ret;					\
 		}							\
 	} while (0)
@@ -1643,12 +1620,13 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 	case USB_DT_STRING:
 	case USB_DT_DEVICE_QUALIFIER:
 		/* function can't have any of those */
-		FVDBG("descriptor reserved for gadget: %d", _ds->bDescriptorType);
+		pr_vdebug("descriptor reserved for gadget: %d\n",
+		      _ds->bDescriptorType);
 		return -EINVAL;
 
 	case USB_DT_INTERFACE: {
 		struct usb_interface_descriptor *ds = (void *)_ds;
-		FVDBG("interface descriptor");
+		pr_vdebug("interface descriptor\n");
 		if (length != sizeof *ds)
 			goto inv_length;
 
@@ -1660,7 +1638,7 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 
 	case USB_DT_ENDPOINT: {
 		struct usb_endpoint_descriptor *ds = (void *)_ds;
-		FVDBG("endpoint descriptor");
+		pr_vdebug("endpoint descriptor\n");
 		if (length != USB_DT_ENDPOINT_SIZE &&
 		    length != USB_DT_ENDPOINT_AUDIO_SIZE)
 			goto inv_length;
@@ -1675,7 +1653,7 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 
 	case USB_DT_INTERFACE_ASSOCIATION: {
 		struct usb_interface_assoc_descriptor *ds = (void *)_ds;
-		FVDBG("interface association descriptor");
+		pr_vdebug("interface association descriptor\n");
 		if (length != sizeof *ds)
 			goto inv_length;
 		if (ds->iFunction)
@@ -1689,17 +1667,17 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 	case USB_DT_SECURITY:
 	case USB_DT_CS_RADIO_CONTROL:
 		/* TODO */
-		FVDBG("unimplemented descriptor: %d", _ds->bDescriptorType);
+		pr_vdebug("unimplemented descriptor: %d\n", _ds->bDescriptorType);
 		return -EINVAL;
 
 	default:
 		/* We should never be here */
-		FVDBG("unknown descriptor: %d", _ds->bDescriptorType);
+		pr_vdebug("unknown descriptor: %d\n", _ds->bDescriptorType);
 		return -EINVAL;
 
-	inv_length:
-		FVDBG("invalid length: %d (descriptor %d)",
-		      _ds->bLength, _ds->bDescriptorType);
+inv_length:
+		pr_vdebug("invalid length: %d (descriptor %d)\n",
+			  _ds->bLength, _ds->bDescriptorType);
 		return -EINVAL;
 	}
 
@@ -1712,7 +1690,6 @@ static int __must_check ffs_do_desc(char *data, unsigned len,
 	return length;
 }
 
-
 static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
 				     ffs_entity_callback entity, void *priv)
 {
@@ -1727,10 +1704,11 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
 		if (num == count)
 			data = NULL;
 
-		/* Record "descriptor" entitny */
+		/* Record "descriptor" entity */
 		ret = entity(FFS_DESCRIPTOR, (u8 *)num, (void *)data, priv);
 		if (unlikely(ret < 0)) {
-			FDBG("entity DESCRIPTOR(%02lx); ret = %d", num, ret);
+			pr_debug("entity DESCRIPTOR(%02lx); ret = %d\n",
+				 num, ret);
 			return ret;
 		}
 
@@ -1739,7 +1717,7 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
 
 		ret = ffs_do_desc(data, len, entity, priv);
 		if (unlikely(ret < 0)) {
-			FDBG("%s returns %d", __func__, ret);
+			pr_debug("%s returns %d\n", __func__, ret);
 			return ret;
 		}
 
@@ -1749,7 +1727,6 @@ static int __must_check ffs_do_descs(unsigned count, char *data, unsigned len,
 	}
 }
 
-
 static int __ffs_data_do_entity(enum ffs_entity_type type,
 				u8 *valuep, struct usb_descriptor_header *desc,
 				void *priv)
@@ -1763,16 +1740,20 @@ static int __ffs_data_do_entity(enum ffs_entity_type type,
 		break;
 
 	case FFS_INTERFACE:
-		/* Interfaces are indexed from zero so if we
+		/*
+		 * Interfaces are indexed from zero so if we
 		 * encountered interface "n" then there are at least
-		 * "n+1" interfaces. */
+		 * "n+1" interfaces.
+		 */
 		if (*valuep >= ffs->interfaces_count)
 			ffs->interfaces_count = *valuep + 1;
 		break;
 
 	case FFS_STRING:
-		/* Strings are indexed from 1 (0 is magic ;) reserved
-		 * for languages list or some such) */
+		/*
+		 * Strings are indexed from 1 (0 is magic ;) reserved
+		 * for languages list or some such)
+		 */
 		if (*valuep > ffs->strings_count)
 			ffs->strings_count = *valuep;
 		break;
@@ -1787,7 +1768,6 @@ static int __ffs_data_do_entity(enum ffs_entity_type type,
 	return 0;
 }
 
-
 static int __ffs_data_got_descs(struct ffs_data *ffs,
 				char *const _data, size_t len)
 {
@@ -1850,8 +1830,6 @@ error:
 	return ret;
 }
 
-
-
 static int __ffs_data_got_strings(struct ffs_data *ffs,
 				  char *const _data, size_t len)
 {
@@ -1877,17 +1855,17 @@ static int __ffs_data_got_strings(struct ffs_data *ffs,
 	if (unlikely(str_count < needed_count))
 		goto error;
 
-	/* If we don't need any strings just return and free all
-	 * memory */
+	/*
+	 * If we don't need any strings just return and free all
+	 * memory.
+	 */
 	if (!needed_count) {
 		kfree(_data);
 		return 0;
 	}
 
-	/* Allocate */
+	/* Allocate everything in one chunk so there's less maintenance. */
 	{
-		/* Allocate everything in one chunk so there's less
-		 * maintanance. */
 		struct {
 			struct usb_gadget_strings *stringtabs[lang_count + 1];
 			struct usb_gadget_strings stringtab[lang_count];
@@ -1938,13 +1916,17 @@ static int __ffs_data_got_strings(struct ffs_data *ffs,
 			if (unlikely(length == len))
 				goto error_free;
 
-			/* user may provide more strings then we need,
-			 * if that's the case we simply ingore the
-			 * rest */
+			/*
+			 * User may provide more strings then we need,
+			 * if that's the case we simply ignore the
+			 * rest
+			 */
 			if (likely(needed)) {
-				/* s->id will be set while adding
+				/*
+				 * s->id will be set while adding
 				 * function to configuration so for
-				 * now just leave garbage here. */
+				 * now just leave garbage here.
+				 */
 				s->s = data;
 				--needed;
 				++s;
@@ -1978,8 +1960,6 @@ error:
 }
 
 
-
-
 /* Events handling and management *******************************************/
 
 static void __ffs_event_add(struct ffs_data *ffs,
@@ -1988,29 +1968,32 @@ static void __ffs_event_add(struct ffs_data *ffs,
 	enum usb_functionfs_event_type rem_type1, rem_type2 = type;
 	int neg = 0;
 
-	/* Abort any unhandled setup */
-	/* We do not need to worry about some cmpxchg() changing value
+	/*
+	 * Abort any unhandled setup
+	 *
+	 * We do not need to worry about some cmpxchg() changing value
 	 * of ffs->setup_state without holding the lock because when
 	 * state is FFS_SETUP_PENDING cmpxchg() in several places in
-	 * the source does nothing. */
+	 * the source does nothing.
+	 */
 	if (ffs->setup_state == FFS_SETUP_PENDING)
 		ffs->setup_state = FFS_SETUP_CANCELED;
 
 	switch (type) {
 	case FUNCTIONFS_RESUME:
 		rem_type2 = FUNCTIONFS_SUSPEND;
-		/* FALL THGOUTH */
+		/* FALL THROUGH */
 	case FUNCTIONFS_SUSPEND:
 	case FUNCTIONFS_SETUP:
 		rem_type1 = type;
-		/* discard all similar events */
+		/* Discard all similar events */
 		break;
 
 	case FUNCTIONFS_BIND:
 	case FUNCTIONFS_UNBIND:
 	case FUNCTIONFS_DISABLE:
 	case FUNCTIONFS_ENABLE:
-		/* discard everything other then power management. */
+		/* Discard everything other then power management. */
 		rem_type1 = FUNCTIONFS_SUSPEND;
 		rem_type2 = FUNCTIONFS_RESUME;
 		neg = 1;
@@ -2027,11 +2010,11 @@ static void __ffs_event_add(struct ffs_data *ffs,
 			if ((*ev == rem_type1 || *ev == rem_type2) == neg)
 				*out++ = *ev;
 			else
-				FVDBG("purging event %d", *ev);
+				pr_vdebug("purging event %d\n", *ev);
 		ffs->ev.count = out - ffs->ev.types;
 	}
 
-	FVDBG("adding event %d", type);
+	pr_vdebug("adding event %d\n", type);
 	ffs->ev.types[ffs->ev.count++] = type;
 	wake_up_locked(&ffs->ev.waitq);
 }
@@ -2056,8 +2039,10 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	struct ffs_function *func = priv;
 	struct ffs_ep *ffs_ep;
 
-	/* If hs_descriptors is not NULL then we are reading hs
-	 * descriptors now */
+	/*
+	 * If hs_descriptors is not NULL then we are reading hs
+	 * descriptors now
+	 */
 	const int isHS = func->function.hs_descriptors != NULL;
 	unsigned idx;
 
@@ -2076,9 +2061,9 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	ffs_ep = func->eps + idx;
 
 	if (unlikely(ffs_ep->descs[isHS])) {
-		FVDBG("two %sspeed descriptors for EP %d",
-		      isHS ? "high" : "full",
-		      ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
+		pr_vdebug("two %sspeed descriptors for EP %d\n",
+			  isHS ? "high" : "full",
+			  ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK);
 		return -EINVAL;
 	}
 	ffs_ep->descs[isHS] = ds;
@@ -2092,11 +2077,11 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 		struct usb_request *req;
 		struct usb_ep *ep;
 
-		FVDBG("autoconfig");
+		pr_vdebug("autoconfig\n");
 		ep = usb_ep_autoconfig(func->gadget, ds);
 		if (unlikely(!ep))
 			return -ENOTSUPP;
-		ep->driver_data = func->eps + idx;;
+		ep->driver_data = func->eps + idx;
 
 		req = usb_ep_alloc_request(ep, GFP_KERNEL);
 		if (unlikely(!req))
@@ -2112,7 +2097,6 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep,
 	return 0;
 }
 
-
 static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep,
 				   struct usb_descriptor_header *desc,
 				   void *priv)
@@ -2144,8 +2128,10 @@ static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep,
 		break;
 
 	case FFS_ENDPOINT:
-		/* USB_DT_ENDPOINT are handled in
-		 * __ffs_func_bind_do_descs(). */
+		/*
+		 * USB_DT_ENDPOINT are handled in
+		 * __ffs_func_bind_do_descs().
+		 */
 		if (desc->bDescriptorType == USB_DT_ENDPOINT)
 			return 0;
 
@@ -2161,7 +2147,7 @@ static int __ffs_func_bind_do_nums(enum ffs_entity_type type, u8 *valuep,
 		break;
 	}
 
-	FVDBG("%02x -> %02x", *valuep, newValue);
+	pr_vdebug("%02x -> %02x\n", *valuep, newValue);
 	*valuep = newValue;
 	return 0;
 }
@@ -2212,9 +2198,11 @@ static int ffs_func_bind(struct usb_configuration *c,
 	func->eps             = data->eps;
 	func->interfaces_nums = data->inums;
 
-	/* Go throught all the endpoint descriptors and allocate
+	/*
+	 * Go through all the endpoint descriptors and allocate
 	 * endpoints first, so that later we can rewrite the endpoint
-	 * numbers without worying that it may be described later on. */
+	 * numbers without worrying that it may be described later on.
+	 */
 	if (likely(full)) {
 		func->function.descriptors = data->fs_descs;
 		ret = ffs_do_descs(ffs->fs_descs_count,
@@ -2235,9 +2223,11 @@ static int ffs_func_bind(struct usb_configuration *c,
 				   __ffs_func_bind_do_descs, func);
 	}
 
-	/* Now handle interface numbers allocation and interface and
-	 * enpoint numbers rewritting.  We can do that in one go
-	 * now. */
+	/*
+	 * Now handle interface numbers allocation and interface and
+	 * endpoint numbers rewriting.  We can do that in one go
+	 * now.
+	 */
 	ret = ffs_do_descs(ffs->fs_descs_count +
 			   (high ? ffs->hs_descs_count : 0),
 			   data->raw_descs, sizeof data->raw_descs,
@@ -2275,7 +2265,6 @@ static void ffs_func_unbind(struct usb_configuration *c,
 	ffs_func_free(func);
 }
 
-
 static int ffs_func_set_alt(struct usb_function *f,
 			    unsigned interface, unsigned alt)
 {
@@ -2323,20 +2312,21 @@ static int ffs_func_setup(struct usb_function *f,
 
 	ENTER();
 
-	FVDBG("creq->bRequestType = %02x", creq->bRequestType);
-	FVDBG("creq->bRequest     = %02x", creq->bRequest);
-	FVDBG("creq->wValue       = %04x", le16_to_cpu(creq->wValue));
-	FVDBG("creq->wIndex       = %04x", le16_to_cpu(creq->wIndex));
-	FVDBG("creq->wLength      = %04x", le16_to_cpu(creq->wLength));
+	pr_vdebug("creq->bRequestType = %02x\n", creq->bRequestType);
+	pr_vdebug("creq->bRequest     = %02x\n", creq->bRequest);
+	pr_vdebug("creq->wValue       = %04x\n", le16_to_cpu(creq->wValue));
+	pr_vdebug("creq->wIndex       = %04x\n", le16_to_cpu(creq->wIndex));
+	pr_vdebug("creq->wLength      = %04x\n", le16_to_cpu(creq->wLength));
 
-	/* Most requests directed to interface go throught here
+	/*
+	 * Most requests directed to interface go through here
 	 * (notable exceptions are set/get interface) so we need to
 	 * handle them.  All other either handled by composite or
 	 * passed to usb_configuration->setup() (if one is set).  No
 	 * matter, we will handle requests directed to endpoint here
 	 * as well (as it's straightforward) but what to do with any
-	 * other request? */
-
+	 * other request?
+	 */
 	if (ffs->state != FFS_ACTIVE)
 		return -ENODEV;
 
@@ -2379,8 +2369,7 @@ static void ffs_func_resume(struct usb_function *f)
 }
 
 
-
-/* Enpoint and interface numbers reverse mapping ****************************/
+/* Endpoint and interface numbers reverse mapping ***************************/
 
 static int ffs_func_revmap_ep(struct ffs_function *func, u8 num)
 {
@@ -2411,7 +2400,6 @@ static int ffs_mutex_lock(struct mutex *mutex, unsigned nonblock)
 		: mutex_lock_interruptible(mutex);
 }
 
-
 static char *ffs_prepare_buffer(const char * __user buf, size_t len)
 {
 	char *data;
@@ -2428,7 +2416,7 @@ static char *ffs_prepare_buffer(const char * __user buf, size_t len)
 		return ERR_PTR(-EFAULT);
 	}
 
-	FVDBG("Buffer from user space:");
+	pr_vdebug("Buffer from user space:\n");
 	ffs_dump_mem("", data, len);
 
 	return data;
diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c
index 4f891eddd06..598e7e2ab80 100644
--- a/drivers/usb/gadget/f_hid.c
+++ b/drivers/usb/gadget/f_hid.c
@@ -25,7 +25,6 @@
 #include <linux/cdev.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
-#include <linux/smp_lock.h>
 #include <linux/uaccess.h>
 #include <linux/wait.h>
 #include <linux/usb/g_hid.h>
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index 838286b1cd1..b5dbb2308f5 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -37,7 +37,6 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-
 /*
  * The Mass Storage Function acts as a USB Mass Storage device,
  * appearing to the host as a disk drive or as a CD-ROM drive.  In
@@ -185,7 +184,6 @@
  * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
  */
 
-
 /*
  *				Driver Design
  *
@@ -275,7 +273,6 @@
 /* #define VERBOSE_DEBUG */
 /* #define DUMP_MSGS */
 
-
 #include <linux/blkdev.h>
 #include <linux/completion.h>
 #include <linux/dcache.h>
@@ -300,7 +297,6 @@
 #include "gadget_chips.h"
 
 
-
 /*------------------------------------------------------------------------*/
 
 #define FSG_DRIVER_DESC		"Mass Storage Function"
@@ -308,7 +304,6 @@
 
 static const char fsg_string_interface[] = "Mass Storage";
 
-
 #define FSG_NO_INTR_EP 1
 #define FSG_NO_DEVICE_STRINGS    1
 #define FSG_NO_OTG               1
@@ -324,25 +319,30 @@ struct fsg_common;
 
 /* FSF callback functions */
 struct fsg_operations {
-	/* Callback function to call when thread exits.  If no
+	/*
+	 * Callback function to call when thread exits.  If no
 	 * callback is set or it returns value lower then zero MSF
 	 * will force eject all LUNs it operates on (including those
 	 * marked as non-removable or with prevent_medium_removal flag
-	 * set). */
+	 * set).
+	 */
 	int (*thread_exits)(struct fsg_common *common);
 
-	/* Called prior to ejection.  Negative return means error,
+	/*
+	 * Called prior to ejection.  Negative return means error,
 	 * zero means to continue with ejection, positive means not to
-	 * eject. */
+	 * eject.
+	 */
 	int (*pre_eject)(struct fsg_common *common,
 			 struct fsg_lun *lun, int num);
-	/* Called after ejection.  Negative return means error, zero
-	 * or positive is just a success. */
+	/*
+	 * Called after ejection.  Negative return means error, zero
+	 * or positive is just a success.
+	 */
 	int (*post_eject)(struct fsg_common *common,
 			  struct fsg_lun *lun, int num);
 };
 
-
 /* Data shared by all the FSG instances. */
 struct fsg_common {
 	struct usb_gadget	*gadget;
@@ -398,14 +398,15 @@ struct fsg_common {
 	/* Gadget's private data. */
 	void			*private_data;
 
-	/* Vendor (8 chars), product (16 chars), release (4
-	 * hexadecimal digits) and NUL byte */
+	/*
+	 * Vendor (8 chars), product (16 chars), release (4
+	 * hexadecimal digits) and NUL byte
+	 */
 	char inquiry_string[8 + 16 + 4 + 1];
 
 	struct kref		ref;
 };
 
-
 struct fsg_config {
 	unsigned nluns;
 	struct fsg_lun_config {
@@ -431,7 +432,6 @@ struct fsg_config {
 	char			can_stall;
 };
 
-
 struct fsg_dev {
 	struct usb_function	function;
 	struct usb_gadget	*gadget;	/* Copy of cdev->gadget */
@@ -449,7 +449,6 @@ struct fsg_dev {
 	struct usb_ep		*bulk_out;
 };
 
-
 static inline int __fsg_is_set(struct fsg_common *common,
 			       const char *func, unsigned line)
 {
@@ -462,13 +461,11 @@ static inline int __fsg_is_set(struct fsg_common *common,
 
 #define fsg_is_set(common) likely(__fsg_is_set(common, __func__, __LINE__))
 
-
 static inline struct fsg_dev *fsg_from_func(struct usb_function *f)
 {
 	return container_of(f, struct fsg_dev, function);
 }
 
-
 typedef void (*fsg_routine_t)(struct fsg_dev *);
 
 static int exception_in_progress(struct fsg_common *common)
@@ -478,7 +475,7 @@ static int exception_in_progress(struct fsg_common *common)
 
 /* Make bulk-out requests be divisible by the maxpacket size */
 static void set_bulk_out_req_length(struct fsg_common *common,
-		struct fsg_buffhd *bh, unsigned int length)
+				    struct fsg_buffhd *bh, unsigned int length)
 {
 	unsigned int	rem;
 
@@ -489,6 +486,7 @@ static void set_bulk_out_req_length(struct fsg_common *common,
 	bh->outreq->length = length;
 }
 
+
 /*-------------------------------------------------------------------------*/
 
 static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
@@ -519,14 +517,15 @@ static void wakeup_thread(struct fsg_common *common)
 		wake_up_process(common->thread_task);
 }
 
-
 static void raise_exception(struct fsg_common *common, enum fsg_state new_state)
 {
 	unsigned long		flags;
 
-	/* Do nothing if a higher-priority exception is already in progress.
+	/*
+	 * Do nothing if a higher-priority exception is already in progress.
 	 * If a lower-or-equal priority exception is in progress, preempt it
-	 * and notify the main thread by sending it a signal. */
+	 * and notify the main thread by sending it a signal.
+	 */
 	spin_lock_irqsave(&common->lock, flags);
 	if (common->state <= new_state) {
 		common->exception_req_tag = common->ep0_req_tag;
@@ -555,10 +554,10 @@ static int ep0_queue(struct fsg_common *common)
 	return rc;
 }
 
+
 /*-------------------------------------------------------------------------*/
 
-/* Bulk and interrupt endpoint completion handlers.
- * These always run in_irq. */
+/* Completion handlers. These always run in_irq. */
 
 static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
 {
@@ -567,7 +566,7 @@ static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
 
 	if (req->status || req->actual != req->length)
 		DBG(common, "%s --> %d, %u/%u\n", __func__,
-				req->status, req->actual, req->length);
+		    req->status, req->actual, req->length);
 	if (req->status == -ECONNRESET)		/* Request was cancelled */
 		usb_ep_fifo_flush(ep);
 
@@ -588,8 +587,7 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
 	dump_msg(common, "bulk-out", req->buf, req->actual);
 	if (req->status || req->actual != bh->bulk_out_intended_length)
 		DBG(common, "%s --> %d, %u/%u\n", __func__,
-				req->status, req->actual,
-				bh->bulk_out_intended_length);
+		    req->status, req->actual, bh->bulk_out_intended_length);
 	if (req->status == -ECONNRESET)		/* Request was cancelled */
 		usb_ep_fifo_flush(ep);
 
@@ -602,13 +600,8 @@ static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
 	spin_unlock(&common->lock);
 }
 
-
-/*-------------------------------------------------------------------------*/
-
-/* Ep0 class-specific handlers.  These always run in_irq. */
-
 static int fsg_setup(struct usb_function *f,
-		const struct usb_ctrlrequest *ctrl)
+		     const struct usb_ctrlrequest *ctrl)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
 	struct usb_request	*req = fsg->common->ep0req;
@@ -628,8 +621,10 @@ static int fsg_setup(struct usb_function *f,
 		if (w_index != fsg->interface_number || w_value != 0)
 			return -EDOM;
 
-		/* Raise an exception to stop the current operation
-		 * and reinitialize our state. */
+		/*
+		 * Raise an exception to stop the current operation
+		 * and reinitialize our state.
+		 */
 		DBG(fsg, "bulk reset request\n");
 		raise_exception(fsg->common, FSG_STATE_RESET);
 		return DELAYED_STATUS;
@@ -641,7 +636,7 @@ static int fsg_setup(struct usb_function *f,
 		if (w_index != fsg->interface_number || w_value != 0)
 			return -EDOM;
 		VDBG(fsg, "get max LUN\n");
-		*(u8 *) req->buf = fsg->common->nluns - 1;
+		*(u8 *)req->buf = fsg->common->nluns - 1;
 
 		/* Respond with data/status */
 		req->length = min((u16)1, w_length);
@@ -649,8 +644,7 @@ static int fsg_setup(struct usb_function *f,
 	}
 
 	VDBG(fsg,
-	     "unknown class-specific control req "
-	     "%02x.%02x v%04x i%04x l%u\n",
+	     "unknown class-specific control req %02x.%02x v%04x i%04x l%u\n",
 	     ctrl->bRequestType, ctrl->bRequest,
 	     le16_to_cpu(ctrl->wValue), w_index, w_length);
 	return -EOPNOTSUPP;
@@ -661,11 +655,10 @@ static int fsg_setup(struct usb_function *f,
 
 /* All the following routines run in process context */
 
-
 /* Use this for bulk or interrupt transfers, not ep0 */
 static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
-		struct usb_request *req, int *pbusy,
-		enum fsg_buffer_state *state)
+			   struct usb_request *req, int *pbusy,
+			   enum fsg_buffer_state *state)
 {
 	int	rc;
 
@@ -683,25 +676,34 @@ static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
 
 		/* We can't do much more than wait for a reset */
 
-		/* Note: currently the net2280 driver fails zero-length
-		 * submissions if DMA is enabled. */
-		if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
-						req->length == 0))
+		/*
+		 * Note: currently the net2280 driver fails zero-length
+		 * submissions if DMA is enabled.
+		 */
+		if (rc != -ESHUTDOWN &&
+		    !(rc == -EOPNOTSUPP && req->length == 0))
 			WARNING(fsg, "error in submission: %s --> %d\n",
-					ep->name, rc);
+				ep->name, rc);
 	}
 }
 
-#define START_TRANSFER_OR(common, ep_name, req, pbusy, state)		\
-	if (fsg_is_set(common))						\
-		start_transfer((common)->fsg, (common)->fsg->ep_name,	\
-			       req, pbusy, state);			\
-	else
-
-#define START_TRANSFER(common, ep_name, req, pbusy, state)		\
-	START_TRANSFER_OR(common, ep_name, req, pbusy, state) (void)0
-
+static bool start_in_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	if (!fsg_is_set(common))
+		return false;
+	start_transfer(common->fsg, common->fsg->bulk_in,
+		       bh->inreq, &bh->inreq_busy, &bh->state);
+	return true;
+}
 
+static bool start_out_transfer(struct fsg_common *common, struct fsg_buffhd *bh)
+{
+	if (!fsg_is_set(common))
+		return false;
+	start_transfer(common->fsg, common->fsg->bulk_out,
+		       bh->outreq, &bh->outreq_busy, &bh->state);
+	return true;
+}
 
 static int sleep_thread(struct fsg_common *common)
 {
@@ -739,16 +741,20 @@ static int do_read(struct fsg_common *common)
 	unsigned int		partial_page;
 	ssize_t			nread;
 
-	/* Get the starting Logical Block Address and check that it's
-	 * not too big */
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big.
+	 */
 	if (common->cmnd[0] == READ_6)
 		lba = get_unaligned_be24(&common->cmnd[1]);
 	else {
 		lba = get_unaligned_be32(&common->cmnd[2]);
 
-		/* We allow DPO (Disable Page Out = don't save data in the
+		/*
+		 * We allow DPO (Disable Page Out = don't save data in the
 		 * cache) and FUA (Force Unit Access = don't read from the
-		 * cache), but we don't implement them. */
+		 * cache), but we don't implement them.
+		 */
 		if ((common->cmnd[1] & ~0x18) != 0) {
 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
 			return -EINVAL;
@@ -766,22 +772,23 @@ static int do_read(struct fsg_common *common)
 		return -EIO;		/* No default reply */
 
 	for (;;) {
-
-		/* Figure out how much we need to read:
+		/*
+		 * Figure out how much we need to read:
 		 * Try to read the remaining amount.
 		 * But don't read more than the buffer size.
 		 * And don't try to read past the end of the file.
 		 * Finally, if we're not at a page boundary, don't read past
 		 *	the next page.
 		 * If this means reading 0 then we were asked to read past
-		 *	the end of file. */
+		 *	the end of file.
+		 */
 		amount = min(amount_left, FSG_BUFLEN);
-		amount = min((loff_t) amount,
-				curlun->file_length - file_offset);
+		amount = min((loff_t)amount,
+			     curlun->file_length - file_offset);
 		partial_page = file_offset & (PAGE_CACHE_SIZE - 1);
 		if (partial_page > 0)
-			amount = min(amount, (unsigned int) PAGE_CACHE_SIZE -
-					partial_page);
+			amount = min(amount, (unsigned int)PAGE_CACHE_SIZE -
+					     partial_page);
 
 		/* Wait for the next buffer to become available */
 		bh = common->next_buffhd_to_fill;
@@ -791,8 +798,10 @@ static int do_read(struct fsg_common *common)
 				return rc;
 		}
 
-		/* If we were asked to read past the end of file,
-		 * end with an empty buffer. */
+		/*
+		 * If we were asked to read past the end of file,
+		 * end with an empty buffer.
+		 */
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
@@ -806,21 +815,19 @@ static int do_read(struct fsg_common *common)
 		/* Perform the read */
 		file_offset_tmp = file_offset;
 		nread = vfs_read(curlun->filp,
-				(char __user *) bh->buf,
-				amount, &file_offset_tmp);
+				 (char __user *)bh->buf,
+				 amount, &file_offset_tmp);
 		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
-				(unsigned long long) file_offset,
-				(int) nread);
+		      (unsigned long long)file_offset, (int)nread);
 		if (signal_pending(current))
 			return -EINTR;
 
 		if (nread < 0) {
-			LDBG(curlun, "error in file read: %d\n",
-					(int) nread);
+			LDBG(curlun, "error in file read: %d\n", (int)nread);
 			nread = 0;
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file read: %d/%u\n",
-					(int) nread, amount);
+			     (int)nread, amount);
 			nread -= (nread & 511);	/* Round down to a block */
 		}
 		file_offset  += nread;
@@ -842,10 +849,8 @@ static int do_read(struct fsg_common *common)
 
 		/* Send this buffer and go read some more */
 		bh->inreq->zero = 0;
-		START_TRANSFER_OR(common, bulk_in, bh->inreq,
-			       &bh->inreq_busy, &bh->state)
-			/* Don't know what to do if
-			 * common->fsg is NULL */
+		if (!start_in_transfer(common, bh))
+			/* Don't know what to do if common->fsg is NULL */
 			return -EIO;
 		common->next_buffhd_to_fill = bh->next;
 	}
@@ -877,17 +882,21 @@ static int do_write(struct fsg_common *common)
 	curlun->filp->f_flags &= ~O_SYNC;	/* Default is not to wait */
 	spin_unlock(&curlun->filp->f_lock);
 
-	/* Get the starting Logical Block Address and check that it's
-	 * not too big */
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big
+	 */
 	if (common->cmnd[0] == WRITE_6)
 		lba = get_unaligned_be24(&common->cmnd[1]);
 	else {
 		lba = get_unaligned_be32(&common->cmnd[2]);
 
-		/* We allow DPO (Disable Page Out = don't save data in the
+		/*
+		 * We allow DPO (Disable Page Out = don't save data in the
 		 * cache) and FUA (Force Unit Access = write directly to the
 		 * medium).  We don't implement DPO; we implement FUA by
-		 * performing synchronous output. */
+		 * performing synchronous output.
+		 */
 		if (common->cmnd[1] & ~0x18) {
 			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
 			return -EINVAL;
@@ -915,7 +924,8 @@ static int do_write(struct fsg_common *common)
 		bh = common->next_buffhd_to_fill;
 		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
 
-			/* Figure out how much we want to get:
+			/*
+			 * Figure out how much we want to get:
 			 * Try to get the remaining amount.
 			 * But don't get more than the buffer size.
 			 * And don't try to go past the end of the file.
@@ -923,14 +933,15 @@ static int do_write(struct fsg_common *common)
 			 *	don't go past the next page.
 			 * If this means getting 0, then we were asked
 			 *	to write past the end of file.
-			 * Finally, round down to a block boundary. */
+			 * Finally, round down to a block boundary.
+			 */
 			amount = min(amount_left_to_req, FSG_BUFLEN);
-			amount = min((loff_t) amount, curlun->file_length -
-					usb_offset);
+			amount = min((loff_t)amount,
+				     curlun->file_length - usb_offset);
 			partial_page = usb_offset & (PAGE_CACHE_SIZE - 1);
 			if (partial_page > 0)
 				amount = min(amount,
-	(unsigned int) PAGE_CACHE_SIZE - partial_page);
+	(unsigned int)PAGE_CACHE_SIZE - partial_page);
 
 			if (amount == 0) {
 				get_some_more = 0;
@@ -940,11 +951,13 @@ static int do_write(struct fsg_common *common)
 				curlun->info_valid = 1;
 				continue;
 			}
-			amount -= (amount & 511);
+			amount -= amount & 511;
 			if (amount == 0) {
 
-				/* Why were we were asked to transfer a
-				 * partial block? */
+				/*
+				 * Why were we were asked to transfer a
+				 * partial block?
+				 */
 				get_some_more = 0;
 				continue;
 			}
@@ -956,15 +969,15 @@ static int do_write(struct fsg_common *common)
 			if (amount_left_to_req == 0)
 				get_some_more = 0;
 
-			/* amount is always divisible by 512, hence by
-			 * the bulk-out maxpacket size */
+			/*
+			 * amount is always divisible by 512, hence by
+			 * the bulk-out maxpacket size
+			 */
 			bh->outreq->length = amount;
 			bh->bulk_out_intended_length = amount;
 			bh->outreq->short_not_ok = 1;
-			START_TRANSFER_OR(common, bulk_out, bh->outreq,
-					  &bh->outreq_busy, &bh->state)
-				/* Don't know what to do if
-				 * common->fsg is NULL */
+			if (!start_out_transfer(common, bh))
+				/* Dunno what to do if common->fsg is NULL */
 				return -EIO;
 			common->next_buffhd_to_fill = bh->next;
 			continue;
@@ -990,30 +1003,29 @@ static int do_write(struct fsg_common *common)
 			amount = bh->outreq->actual;
 			if (curlun->file_length - file_offset < amount) {
 				LERROR(curlun,
-	"write %u @ %llu beyond end %llu\n",
-	amount, (unsigned long long) file_offset,
-	(unsigned long long) curlun->file_length);
+				       "write %u @ %llu beyond end %llu\n",
+				       amount, (unsigned long long)file_offset,
+				       (unsigned long long)curlun->file_length);
 				amount = curlun->file_length - file_offset;
 			}
 
 			/* Perform the write */
 			file_offset_tmp = file_offset;
 			nwritten = vfs_write(curlun->filp,
-					(char __user *) bh->buf,
-					amount, &file_offset_tmp);
+					     (char __user *)bh->buf,
+					     amount, &file_offset_tmp);
 			VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
-					(unsigned long long) file_offset,
-					(int) nwritten);
+			      (unsigned long long)file_offset, (int)nwritten);
 			if (signal_pending(current))
 				return -EINTR;		/* Interrupted! */
 
 			if (nwritten < 0) {
 				LDBG(curlun, "error in file write: %d\n",
-						(int) nwritten);
+				     (int)nwritten);
 				nwritten = 0;
 			} else if (nwritten < amount) {
 				LDBG(curlun, "partial file write: %d/%u\n",
-						(int) nwritten, amount);
+				     (int)nwritten, amount);
 				nwritten -= (nwritten & 511);
 				/* Round down to a block */
 			}
@@ -1086,16 +1098,20 @@ static int do_verify(struct fsg_common *common)
 	unsigned int		amount;
 	ssize_t			nread;
 
-	/* Get the starting Logical Block Address and check that it's
-	 * not too big */
+	/*
+	 * Get the starting Logical Block Address and check that it's
+	 * not too big.
+	 */
 	lba = get_unaligned_be32(&common->cmnd[2]);
 	if (lba >= curlun->num_sectors) {
 		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
 		return -EINVAL;
 	}
 
-	/* We allow DPO (Disable Page Out = don't save data in the
-	 * cache) but we don't implement it. */
+	/*
+	 * We allow DPO (Disable Page Out = don't save data in the
+	 * cache) but we don't implement it.
+	 */
 	if (common->cmnd[1] & ~0x10) {
 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
 		return -EINVAL;
@@ -1120,16 +1136,17 @@ static int do_verify(struct fsg_common *common)
 
 	/* Just try to read the requested blocks */
 	while (amount_left > 0) {
-
-		/* Figure out how much we need to read:
+		/*
+		 * Figure out how much we need to read:
 		 * Try to read the remaining amount, but not more than
 		 * the buffer size.
 		 * And don't try to read past the end of the file.
 		 * If this means reading 0 then we were asked to read
-		 * past the end of file. */
+		 * past the end of file.
+		 */
 		amount = min(amount_left, FSG_BUFLEN);
-		amount = min((loff_t) amount,
-				curlun->file_length - file_offset);
+		amount = min((loff_t)amount,
+			     curlun->file_length - file_offset);
 		if (amount == 0) {
 			curlun->sense_data =
 					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
@@ -1150,13 +1167,12 @@ static int do_verify(struct fsg_common *common)
 			return -EINTR;
 
 		if (nread < 0) {
-			LDBG(curlun, "error in file verify: %d\n",
-					(int) nread);
+			LDBG(curlun, "error in file verify: %d\n", (int)nread);
 			nread = 0;
 		} else if (nread < amount) {
 			LDBG(curlun, "partial file verify: %d/%u\n",
-					(int) nread, amount);
-			nread -= (nread & 511);	/* Round down to a sector */
+			     (int)nread, amount);
+			nread -= nread & 511;	/* Round down to a sector */
 		}
 		if (nread == 0) {
 			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
@@ -1198,7 +1214,6 @@ static int do_inquiry(struct fsg_common *common, struct fsg_buffhd *bh)
 	return 36;
 }
 
-
 static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1252,13 +1267,12 @@ static int do_request_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 	return 18;
 }
 
-
 static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
 	int		pmi = common->cmnd[8];
-	u8		*buf = (u8 *) bh->buf;
+	u8		*buf = (u8 *)bh->buf;
 
 	/* Check the PMI and LBA fields */
 	if (pmi > 1 || (pmi == 0 && lba != 0)) {
@@ -1272,13 +1286,12 @@ static int do_read_capacity(struct fsg_common *common, struct fsg_buffhd *bh)
 	return 8;
 }
 
-
 static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
 	int		msf = common->cmnd[1] & 0x02;
 	u32		lba = get_unaligned_be32(&common->cmnd[2]);
-	u8		*buf = (u8 *) bh->buf;
+	u8		*buf = (u8 *)bh->buf;
 
 	if (common->cmnd[1] & ~0x02) {		/* Mask away MSF */
 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
@@ -1295,13 +1308,12 @@ static int do_read_header(struct fsg_common *common, struct fsg_buffhd *bh)
 	return 8;
 }
 
-
 static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
 	int		msf = common->cmnd[1] & 0x02;
 	int		start_track = common->cmnd[6];
-	u8		*buf = (u8 *) bh->buf;
+	u8		*buf = (u8 *)bh->buf;
 
 	if ((common->cmnd[1] & ~0x02) != 0 ||	/* Mask away MSF */
 			start_track > 1) {
@@ -1323,7 +1335,6 @@ static int do_read_toc(struct fsg_common *common, struct fsg_buffhd *bh)
 	return 20;
 }
 
-
 static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1348,10 +1359,12 @@ static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 	changeable_values = (pc == 1);
 	all_pages = (page_code == 0x3f);
 
-	/* Write the mode parameter header.  Fixed values are: default
+	/*
+	 * Write the mode parameter header.  Fixed values are: default
 	 * medium type, no cache control (DPOFUA), and no block descriptors.
 	 * The only variable value is the WriteProtect bit.  We will fill in
-	 * the mode data length later. */
+	 * the mode data length later.
+	 */
 	memset(buf, 0, 8);
 	if (mscmnd == MODE_SENSE) {
 		buf[2] = (curlun->ro ? 0x80 : 0x00);		/* WP, DPOFUA */
@@ -1365,8 +1378,10 @@ static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 
 	/* No block descriptors */
 
-	/* The mode pages, in numerical order.  The only page we support
-	 * is the Caching page. */
+	/*
+	 * The mode pages, in numerical order.  The only page we support
+	 * is the Caching page.
+	 */
 	if (page_code == 0x08 || all_pages) {
 		valid_page = 1;
 		buf[0] = 0x08;		/* Page code */
@@ -1388,8 +1403,10 @@ static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 		buf += 12;
 	}
 
-	/* Check that a valid page was requested and the mode data length
-	 * isn't too long. */
+	/*
+	 * Check that a valid page was requested and the mode data length
+	 * isn't too long.
+	 */
 	len = buf - buf0;
 	if (!valid_page || len > limit) {
 		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
@@ -1404,7 +1421,6 @@ static int do_mode_sense(struct fsg_common *common, struct fsg_buffhd *bh)
 	return len;
 }
 
-
 static int do_start_stop(struct fsg_common *common)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1424,8 +1440,10 @@ static int do_start_stop(struct fsg_common *common)
 	loej  = common->cmnd[4] & 0x02;
 	start = common->cmnd[4] & 0x01;
 
-	/* Our emulation doesn't support mounting; the medium is
-	 * available for use as soon as it is loaded. */
+	/*
+	 * Our emulation doesn't support mounting; the medium is
+	 * available for use as soon as it is loaded.
+	 */
 	if (start) {
 		if (!fsg_lun_is_open(curlun)) {
 			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
@@ -1466,7 +1484,6 @@ static int do_start_stop(struct fsg_common *common)
 		: 0;
 }
 
-
 static int do_prevent_allow(struct fsg_common *common)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1491,7 +1508,6 @@ static int do_prevent_allow(struct fsg_common *common)
 	return 0;
 }
 
-
 static int do_read_format_capacities(struct fsg_common *common,
 			struct fsg_buffhd *bh)
 {
@@ -1509,7 +1525,6 @@ static int do_read_format_capacities(struct fsg_common *common,
 	return 12;
 }
 
-
 static int do_mode_select(struct fsg_common *common, struct fsg_buffhd *bh)
 {
 	struct fsg_lun	*curlun = common->curlun;
@@ -1591,7 +1606,7 @@ static int pad_with_zeros(struct fsg_dev *fsg)
 		bh->inreq->length = nsend;
 		bh->inreq->zero = 0;
 		start_transfer(fsg, fsg->bulk_in, bh->inreq,
-				&bh->inreq_busy, &bh->state);
+			       &bh->inreq_busy, &bh->state);
 		bh = fsg->common->next_buffhd_to_fill = bh->next;
 		fsg->common->usb_amount_left -= nsend;
 		nkeep = 0;
@@ -1617,7 +1632,7 @@ static int throw_away_data(struct fsg_common *common)
 
 			/* A short packet or an error ends everything */
 			if (bh->outreq->actual != bh->outreq->length ||
-					bh->outreq->status != 0) {
+			    bh->outreq->status != 0) {
 				raise_exception(common,
 						FSG_STATE_ABORT_BULK_OUT);
 				return -EINTR;
@@ -1631,15 +1646,15 @@ static int throw_away_data(struct fsg_common *common)
 		 && common->usb_amount_left > 0) {
 			amount = min(common->usb_amount_left, FSG_BUFLEN);
 
-			/* amount is always divisible by 512, hence by
-			 * the bulk-out maxpacket size */
+			/*
+			 * amount is always divisible by 512, hence by
+			 * the bulk-out maxpacket size.
+			 */
 			bh->outreq->length = amount;
 			bh->bulk_out_intended_length = amount;
 			bh->outreq->short_not_ok = 1;
-			START_TRANSFER_OR(common, bulk_out, bh->outreq,
-					  &bh->outreq_busy, &bh->state)
-				/* Don't know what to do if
-				 * common->fsg is NULL */
+			if (!start_out_transfer(common, bh))
+				/* Dunno what to do if common->fsg is NULL */
 				return -EIO;
 			common->next_buffhd_to_fill = bh->next;
 			common->usb_amount_left -= amount;
@@ -1654,7 +1669,6 @@ static int throw_away_data(struct fsg_common *common)
 	return 0;
 }
 
-
 static int finish_reply(struct fsg_common *common)
 {
 	struct fsg_buffhd	*bh = common->next_buffhd_to_fill;
@@ -1664,10 +1678,12 @@ static int finish_reply(struct fsg_common *common)
 	case DATA_DIR_NONE:
 		break;			/* Nothing to send */
 
-	/* If we don't know whether the host wants to read or write,
+	/*
+	 * If we don't know whether the host wants to read or write,
 	 * this must be CB or CBI with an unknown command.  We mustn't
 	 * try to send or receive any data.  So stall both bulk pipes
-	 * if we can and wait for a reset. */
+	 * if we can and wait for a reset.
+	 */
 	case DATA_DIR_UNKNOWN:
 		if (!common->can_stall) {
 			/* Nothing */
@@ -1688,18 +1704,18 @@ static int finish_reply(struct fsg_common *common)
 		/* If there's no residue, simply send the last buffer */
 		} else if (common->residue == 0) {
 			bh->inreq->zero = 0;
-			START_TRANSFER_OR(common, bulk_in, bh->inreq,
-					  &bh->inreq_busy, &bh->state)
+			if (!start_in_transfer(common, bh))
 				return -EIO;
 			common->next_buffhd_to_fill = bh->next;
 
-		/* For Bulk-only, if we're allowed to stall then send the
+		/*
+		 * For Bulk-only, if we're allowed to stall then send the
 		 * short packet and halt the bulk-in endpoint.  If we can't
-		 * stall, pad out the remaining data with 0's. */
+		 * stall, pad out the remaining data with 0's.
+		 */
 		} else if (common->can_stall) {
 			bh->inreq->zero = 1;
-			START_TRANSFER_OR(common, bulk_in, bh->inreq,
-					  &bh->inreq_busy, &bh->state)
+			if (!start_in_transfer(common, bh))
 				/* Don't know what to do if
 				 * common->fsg is NULL */
 				rc = -EIO;
@@ -1714,8 +1730,10 @@ static int finish_reply(struct fsg_common *common)
 		}
 		break;
 
-	/* We have processed all we want from the data the host has sent.
-	 * There may still be outstanding bulk-out requests. */
+	/*
+	 * We have processed all we want from the data the host has sent.
+	 * There may still be outstanding bulk-out requests.
+	 */
 	case DATA_DIR_FROM_HOST:
 		if (common->residue == 0) {
 			/* Nothing to receive */
@@ -1725,12 +1743,14 @@ static int finish_reply(struct fsg_common *common)
 			raise_exception(common, FSG_STATE_ABORT_BULK_OUT);
 			rc = -EINTR;
 
-		/* We haven't processed all the incoming data.  Even though
+		/*
+		 * We haven't processed all the incoming data.  Even though
 		 * we may be allowed to stall, doing so would cause a race.
 		 * The controller may already have ACK'ed all the remaining
 		 * bulk-out packets, in which case the host wouldn't see a
 		 * STALL.  Not realizing the endpoint was halted, it wouldn't
-		 * clear the halt -- leading to problems later on. */
+		 * clear the halt -- leading to problems later on.
+		 */
 #if 0
 		} else if (common->can_stall) {
 			if (fsg_is_set(common))
@@ -1740,8 +1760,10 @@ static int finish_reply(struct fsg_common *common)
 			rc = -EINTR;
 #endif
 
-		/* We can't stall.  Read in the excess data and throw it
-		 * all away. */
+		/*
+		 * We can't stall.  Read in the excess data and throw it
+		 * all away.
+		 */
 		} else {
 			rc = throw_away_data(common);
 		}
@@ -1750,7 +1772,6 @@ static int finish_reply(struct fsg_common *common)
 	return rc;
 }
 
-
 static int send_status(struct fsg_common *common)
 {
 	struct fsg_lun		*curlun = common->curlun;
@@ -1798,8 +1819,7 @@ static int send_status(struct fsg_common *common)
 
 	bh->inreq->length = USB_BULK_CS_WRAP_LEN;
 	bh->inreq->zero = 0;
-	START_TRANSFER_OR(common, bulk_in, bh->inreq,
-			  &bh->inreq_busy, &bh->state)
+	if (!start_in_transfer(common, bh))
 		/* Don't know what to do if common->fsg is NULL */
 		return -EIO;
 
@@ -1810,11 +1830,13 @@ static int send_status(struct fsg_common *common)
 
 /*-------------------------------------------------------------------------*/
 
-/* Check whether the command is properly formed and whether its data size
- * and direction agree with the values we already have. */
+/*
+ * Check whether the command is properly formed and whether its data size
+ * and direction agree with the values we already have.
+ */
 static int check_command(struct fsg_common *common, int cmnd_size,
-		enum data_direction data_dir, unsigned int mask,
-		int needs_medium, const char *name)
+			 enum data_direction data_dir, unsigned int mask,
+			 int needs_medium, const char *name)
 {
 	int			i;
 	int			lun = common->cmnd[1] >> 5;
@@ -1825,19 +1847,23 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 	hdlen[0] = 0;
 	if (common->data_dir != DATA_DIR_UNKNOWN)
 		sprintf(hdlen, ", H%c=%u", dirletter[(int) common->data_dir],
-				common->data_size);
+			common->data_size);
 	VDBG(common, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
 	     name, cmnd_size, dirletter[(int) data_dir],
 	     common->data_size_from_cmnd, common->cmnd_size, hdlen);
 
-	/* We can't reply at all until we know the correct data direction
-	 * and size. */
+	/*
+	 * We can't reply at all until we know the correct data direction
+	 * and size.
+	 */
 	if (common->data_size_from_cmnd == 0)
 		data_dir = DATA_DIR_NONE;
 	if (common->data_size < common->data_size_from_cmnd) {
-		/* Host data size < Device data size is a phase error.
+		/*
+		 * Host data size < Device data size is a phase error.
 		 * Carry out the command, but only transfer as much as
-		 * we are allowed. */
+		 * we are allowed.
+		 */
 		common->data_size_from_cmnd = common->data_size;
 		common->phase_error = 1;
 	}
@@ -1845,8 +1871,7 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 	common->usb_amount_left = common->data_size;
 
 	/* Conflicting data directions is a phase error */
-	if (common->data_dir != data_dir
-	 && common->data_size_from_cmnd > 0) {
+	if (common->data_dir != data_dir && common->data_size_from_cmnd > 0) {
 		common->phase_error = 1;
 		return -EINVAL;
 	}
@@ -1854,7 +1879,8 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 	/* Verify the length of the command itself */
 	if (cmnd_size != common->cmnd_size) {
 
-		/* Special case workaround: There are plenty of buggy SCSI
+		/*
+		 * Special case workaround: There are plenty of buggy SCSI
 		 * implementations. Many have issues with cbw->Length
 		 * field passing a wrong command size. For those cases we
 		 * always try to work around the problem by using the length
@@ -1896,8 +1922,10 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 		curlun = NULL;
 		common->bad_lun_okay = 0;
 
-		/* INQUIRY and REQUEST SENSE commands are explicitly allowed
-		 * to use unsupported LUNs; all others may not. */
+		/*
+		 * INQUIRY and REQUEST SENSE commands are explicitly allowed
+		 * to use unsupported LUNs; all others may not.
+		 */
 		if (common->cmnd[0] != INQUIRY &&
 		    common->cmnd[0] != REQUEST_SENSE) {
 			DBG(common, "unsupported LUN %d\n", common->lun);
@@ -1905,11 +1933,13 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 		}
 	}
 
-	/* If a unit attention condition exists, only INQUIRY and
-	 * REQUEST SENSE commands are allowed; anything else must fail. */
+	/*
+	 * If a unit attention condition exists, only INQUIRY and
+	 * REQUEST SENSE commands are allowed; anything else must fail.
+	 */
 	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
-			common->cmnd[0] != INQUIRY &&
-			common->cmnd[0] != REQUEST_SENSE) {
+	    common->cmnd[0] != INQUIRY &&
+	    common->cmnd[0] != REQUEST_SENSE) {
 		curlun->sense_data = curlun->unit_attention_data;
 		curlun->unit_attention_data = SS_NO_SENSE;
 		return -EINVAL;
@@ -1935,7 +1965,6 @@ static int check_command(struct fsg_common *common, int cmnd_size,
 	return 0;
 }
 
-
 static int do_scsi_command(struct fsg_common *common)
 {
 	struct fsg_buffhd	*bh;
@@ -2123,8 +2152,10 @@ static int do_scsi_command(struct fsg_common *common)
 				"TEST UNIT READY");
 		break;
 
-	/* Although optional, this command is used by MS-Windows.  We
-	 * support a minimal version: BytChk must be 0. */
+	/*
+	 * Although optional, this command is used by MS-Windows.  We
+	 * support a minimal version: BytChk must be 0.
+	 */
 	case VERIFY:
 		common->data_size_from_cmnd = 0;
 		reply = check_command(common, 10, DATA_DIR_NONE,
@@ -2164,10 +2195,12 @@ static int do_scsi_command(struct fsg_common *common)
 			reply = do_write(common);
 		break;
 
-	/* Some mandatory commands that we recognize but don't implement.
+	/*
+	 * Some mandatory commands that we recognize but don't implement.
 	 * They don't mean much in this setting.  It's left as an exercise
 	 * for anyone interested to implement RESERVE and RELEASE in terms
-	 * of Posix locks. */
+	 * of Posix locks.
+	 */
 	case FORMAT_UNIT:
 	case RELEASE:
 	case RESERVE:
@@ -2195,7 +2228,7 @@ unknown_cmnd:
 	if (reply == -EINVAL)
 		reply = 0;		/* Error reply length */
 	if (reply >= 0 && common->data_dir == DATA_DIR_TO_HOST) {
-		reply = min((u32) reply, common->data_size_from_cmnd);
+		reply = min((u32)reply, common->data_size_from_cmnd);
 		bh->inreq->length = reply;
 		bh->state = BUF_STATE_FULL;
 		common->residue -= reply;
@@ -2225,7 +2258,8 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 				req->actual,
 				le32_to_cpu(cbw->Signature));
 
-		/* The Bulk-only spec says we MUST stall the IN endpoint
+		/*
+		 * The Bulk-only spec says we MUST stall the IN endpoint
 		 * (6.6.1), so it's unavoidable.  It also says we must
 		 * retain this state until the next reset, but there's
 		 * no way to tell the controller driver it should ignore
@@ -2233,7 +2267,8 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 		 *
 		 * We aren't required to halt the OUT endpoint; instead
 		 * we can simply accept and discard any data received
-		 * until the next reset. */
+		 * until the next reset.
+		 */
 		wedge_bulk_in_endpoint(fsg);
 		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
 		return -EINVAL;
@@ -2246,8 +2281,10 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 				"cmdlen %u\n",
 				cbw->Lun, cbw->Flags, cbw->Length);
 
-		/* We can do anything we want here, so let's stall the
-		 * bulk pipes if we are allowed to. */
+		/*
+		 * We can do anything we want here, so let's stall the
+		 * bulk pipes if we are allowed to.
+		 */
 		if (common->can_stall) {
 			fsg_set_halt(fsg, fsg->bulk_out);
 			halt_bulk_in_endpoint(fsg);
@@ -2270,7 +2307,6 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
 	return 0;
 }
 
-
 static int get_next_command(struct fsg_common *common)
 {
 	struct fsg_buffhd	*bh;
@@ -2287,14 +2323,15 @@ static int get_next_command(struct fsg_common *common)
 	/* Queue a request to read a Bulk-only CBW */
 	set_bulk_out_req_length(common, bh, USB_BULK_CB_WRAP_LEN);
 	bh->outreq->short_not_ok = 1;
-	START_TRANSFER_OR(common, bulk_out, bh->outreq,
-			  &bh->outreq_busy, &bh->state)
+	if (!start_out_transfer(common, bh))
 		/* Don't know what to do if common->fsg is NULL */
 		return -EIO;
 
-	/* We will drain the buffer in software, which means we
+	/*
+	 * We will drain the buffer in software, which means we
 	 * can reuse it for the next filling.  No need to advance
-	 * next_buffhd_to_fill. */
+	 * next_buffhd_to_fill.
+	 */
 
 	/* Wait for the CBW to arrive */
 	while (bh->state != BUF_STATE_FULL) {
@@ -2425,7 +2462,6 @@ reset:
 
 /****************************** ALT CONFIGS ******************************/
 
-
 static int fsg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
 {
 	struct fsg_dev *fsg = fsg_from_func(f);
@@ -2453,8 +2489,10 @@ static void handle_exception(struct fsg_common *common)
 	struct fsg_lun		*curlun;
 	unsigned int		exception_req_tag;
 
-	/* Clear the existing signals.  Anything but SIGUSR1 is converted
-	 * into a high-priority EXIT exception. */
+	/*
+	 * Clear the existing signals.  Anything but SIGUSR1 is converted
+	 * into a high-priority EXIT exception.
+	 */
 	for (;;) {
 		int sig =
 			dequeue_signal_lock(current, &current->blocked, &info);
@@ -2498,8 +2536,10 @@ static void handle_exception(struct fsg_common *common)
 			usb_ep_fifo_flush(common->fsg->bulk_out);
 	}
 
-	/* Reset the I/O buffer states and pointers, the SCSI
-	 * state, and the exception.  Then invoke the handler. */
+	/*
+	 * Reset the I/O buffer states and pointers, the SCSI
+	 * state, and the exception.  Then invoke the handler.
+	 */
 	spin_lock_irq(&common->lock);
 
 	for (i = 0; i < FSG_NUM_BUFFERS; ++i) {
@@ -2537,9 +2577,11 @@ static void handle_exception(struct fsg_common *common)
 		break;
 
 	case FSG_STATE_RESET:
-		/* In case we were forced against our will to halt a
+		/*
+		 * In case we were forced against our will to halt a
 		 * bulk endpoint, clear the halt now.  (The SuperH UDC
-		 * requires this.) */
+		 * requires this.)
+		 */
 		if (!fsg_is_set(common))
 			break;
 		if (test_and_clear_bit(IGNORE_BULK_OUT,
@@ -2549,9 +2591,11 @@ static void handle_exception(struct fsg_common *common)
 		if (common->ep0_req_tag == exception_req_tag)
 			ep0_queue(common);	/* Complete the status stage */
 
-		/* Technically this should go here, but it would only be
+		/*
+		 * Technically this should go here, but it would only be
 		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
-		 * CONFIG_CHANGE cases. */
+		 * CONFIG_CHANGE cases.
+		 */
 		/* for (i = 0; i < common->nluns; ++i) */
 		/*	common->luns[i].unit_attention_data = */
 		/*		SS_RESET_OCCURRED;  */
@@ -2586,8 +2630,10 @@ static int fsg_main_thread(void *common_)
 {
 	struct fsg_common	*common = common_;
 
-	/* Allow the thread to be killed by a signal, but set the signal mask
-	 * to block everything but INT, TERM, KILL, and USR1. */
+	/*
+	 * Allow the thread to be killed by a signal, but set the signal mask
+	 * to block everything but INT, TERM, KILL, and USR1.
+	 */
 	allow_signal(SIGINT);
 	allow_signal(SIGTERM);
 	allow_signal(SIGKILL);
@@ -2596,9 +2642,11 @@ static int fsg_main_thread(void *common_)
 	/* Allow the thread to be frozen */
 	set_freezable();
 
-	/* Arrange for userspace references to be interpreted as kernel
+	/*
+	 * Arrange for userspace references to be interpreted as kernel
 	 * pointers.  That way we can pass a kernel pointer to a routine
-	 * that expects a __user pointer and it will work okay. */
+	 * that expects a __user pointer and it will work okay.
+	 */
 	set_fs(get_ds());
 
 	/* The main loop */
@@ -2658,7 +2706,7 @@ static int fsg_main_thread(void *common_)
 		up_write(&common->filesem);
 	}
 
-	/* Let the unbind and cleanup routines know the thread has exited */
+	/* Let fsg_unbind() know the thread has exited */
 	complete_and_exit(&common->thread_notifier, 0);
 }
 
@@ -2690,7 +2738,6 @@ static inline void fsg_common_put(struct fsg_common *common)
 	kref_put(&common->ref, fsg_common_release);
 }
 
-
 static struct fsg_common *fsg_common_init(struct fsg_common *common,
 					  struct usb_composite_dev *cdev,
 					  struct fsg_config *cfg)
@@ -2736,8 +2783,10 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 		fsg_intf_desc.iInterface = rc;
 	}
 
-	/* Create the LUNs, open their backing files, and register the
-	 * LUN devices in sysfs. */
+	/*
+	 * Create the LUNs, open their backing files, and register the
+	 * LUN devices in sysfs.
+	 */
 	curlun = kzalloc(nluns * sizeof *curlun, GFP_KERNEL);
 	if (unlikely(!curlun)) {
 		rc = -ENOMEM;
@@ -2765,6 +2814,7 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 		if (rc) {
 			INFO(common, "failed to register LUN%d: %d\n", i, rc);
 			common->nluns = i;
+			put_device(&curlun->dev);
 			goto error_release;
 		}
 
@@ -2790,7 +2840,6 @@ static struct fsg_common *fsg_common_init(struct fsg_common *common,
 	}
 	common->nluns = nluns;
 
-
 	/* Data buffers cyclic list */
 	bh = common->buffhds;
 	i = FSG_NUM_BUFFERS;
@@ -2807,7 +2856,6 @@ buffhds_first_it:
 	} while (--i);
 	bh->next = common->buffhds;
 
-
 	/* Prepare inquiryString */
 	if (cfg->release != 0xffff) {
 		i = cfg->release;
@@ -2821,41 +2869,35 @@ buffhds_first_it:
 			i = 0x0399;
 		}
 	}
-#define OR(x, y) ((x) ? (x) : (y))
 	snprintf(common->inquiry_string, sizeof common->inquiry_string,
-		 "%-8s%-16s%04x",
-		 OR(cfg->vendor_name, "Linux   "),
+		 "%-8s%-16s%04x", cfg->vendor_name ?: "Linux",
 		 /* Assume product name dependent on the first LUN */
-		 OR(cfg->product_name, common->luns->cdrom
+		 cfg->product_name ?: (common->luns->cdrom
 				     ? "File-Stor Gadget"
-				     : "File-CD Gadget  "),
+				     : "File-CD Gadget"),
 		 i);
 
-
-	/* Some peripheral controllers are known not to be able to
+	/*
+	 * Some peripheral controllers are known not to be able to
 	 * halt bulk endpoints correctly.  If one of them is present,
 	 * disable stalls.
 	 */
 	common->can_stall = cfg->can_stall &&
 		!(gadget_is_at91(common->gadget));
 
-
 	spin_lock_init(&common->lock);
 	kref_init(&common->ref);
 
-
 	/* Tell the thread to start working */
 	common->thread_task =
 		kthread_create(fsg_main_thread, common,
-			       OR(cfg->thread_name, "file-storage"));
+			       cfg->thread_name ?: "file-storage");
 	if (IS_ERR(common->thread_task)) {
 		rc = PTR_ERR(common->thread_task);
 		goto error_release;
 	}
 	init_completion(&common->thread_notifier);
 	init_waitqueue_head(&common->fsg_wait);
-#undef OR
-
 
 	/* Information */
 	INFO(common, FSG_DRIVER_DESC ", version: " FSG_DRIVER_VERSION "\n");
@@ -2889,18 +2931,15 @@ buffhds_first_it:
 
 	return common;
 
-
 error_luns:
 	common->nluns = i + 1;
 error_release:
 	common->state = FSG_STATE_TERMINATED;	/* The thread is dead */
-	/* Call fsg_common_release() directly, ref might be not
-	 * initialised */
+	/* Call fsg_common_release() directly, ref might be not initialised. */
 	fsg_common_release(&common->ref);
 	return ERR_PTR(rc);
 }
 
-
 static void fsg_common_release(struct kref *ref)
 {
 	struct fsg_common *common = container_of(ref, struct fsg_common, ref);
@@ -2909,9 +2948,6 @@ static void fsg_common_release(struct kref *ref)
 	if (common->state != FSG_STATE_TERMINATED) {
 		raise_exception(common, FSG_STATE_EXIT);
 		wait_for_completion(&common->thread_notifier);
-
-		/* The cleanup routine waits for this completion also */
-		complete(&common->thread_notifier);
 	}
 
 	if (likely(common->luns)) {
@@ -2945,7 +2981,6 @@ static void fsg_common_release(struct kref *ref)
 
 /*-------------------------------------------------------------------------*/
 
-
 static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
@@ -2965,7 +3000,6 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f)
 	kfree(fsg);
 }
 
-
 static int fsg_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct fsg_dev		*fsg = fsg_from_func(f);
@@ -3048,11 +3082,13 @@ static int fsg_bind_config(struct usb_composite_dev *cdev,
 	fsg->function.disable     = fsg_disable;
 
 	fsg->common               = common;
-	/* Our caller holds a reference to common structure so we
+	/*
+	 * Our caller holds a reference to common structure so we
 	 * don't have to be worry about it being freed until we return
 	 * from this function.  So instead of incrementing counter now
 	 * and decrement in error recovery we increment it only when
-	 * call to usb_add_function() was successful. */
+	 * call to usb_add_function() was successful.
+	 */
 
 	rc = usb_add_function(c, &fsg->function);
 	if (unlikely(rc))
@@ -3063,8 +3099,7 @@ static int fsg_bind_config(struct usb_composite_dev *cdev,
 }
 
 static inline int __deprecated __maybe_unused
-fsg_add(struct usb_composite_dev *cdev,
-	struct usb_configuration *c,
+fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c,
 	struct fsg_common *common)
 {
 	return fsg_bind_config(cdev, c, common);
@@ -3073,7 +3108,6 @@ fsg_add(struct usb_composite_dev *cdev,
 
 /************************* Module parameters *************************/
 
-
 struct fsg_module_parameters {
 	char		*file[FSG_MAX_LUNS];
 	int		ro[FSG_MAX_LUNS];
@@ -3087,7 +3121,6 @@ struct fsg_module_parameters {
 	int		stall;	/* can_stall */
 };
 
-
 #define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc)	\
 	module_param_array_named(prefix ## name, params.name, type,	\
 				 &prefix ## params.name ## _count,	\
@@ -3115,7 +3148,6 @@ struct fsg_module_parameters {
 	_FSG_MODULE_PARAM(prefix, params, stall, bool,			\
 			  "false to prevent bulk stalls")
 
-
 static void
 fsg_config_from_params(struct fsg_config *cfg,
 		       const struct fsg_module_parameters *params)
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
new file mode 100644
index 00000000000..130eee678c8
--- /dev/null
+++ b/drivers/usb/gadget/f_ncm.c
@@ -0,0 +1,1407 @@
+/*
+ * f_ncm.c -- USB CDC Network (NCM) link function driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Contact: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
+ *
+ * The driver borrows from f_ecm.c which is:
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/crc32.h>
+
+#include <linux/usb/cdc.h>
+
+#include "u_ether.h"
+
+/*
+ * This function is a "CDC Network Control Model" (CDC NCM) Ethernet link.
+ * NCM is intended to be used with high-speed network attachments.
+ *
+ * Note that NCM requires the use of "alternate settings" for its data
+ * interface.  This means that the set_alt() method has real work to do,
+ * and also means that a get_alt() method is required.
+ */
+
+/* to trigger crc/non-crc ndp signature */
+
+#define NCM_NDP_HDR_CRC_MASK	0x01000000
+#define NCM_NDP_HDR_CRC		0x01000000
+#define NCM_NDP_HDR_NOCRC	0x00000000
+
+struct ncm_ep_descs {
+	struct usb_endpoint_descriptor	*in;
+	struct usb_endpoint_descriptor	*out;
+	struct usb_endpoint_descriptor	*notify;
+};
+
+enum ncm_notify_state {
+	NCM_NOTIFY_NONE,		/* don't notify */
+	NCM_NOTIFY_CONNECT,		/* issue CONNECT next */
+	NCM_NOTIFY_SPEED,		/* issue SPEED_CHANGE next */
+};
+
+struct f_ncm {
+	struct gether			port;
+	u8				ctrl_id, data_id;
+
+	char				ethaddr[14];
+
+	struct ncm_ep_descs		fs;
+	struct ncm_ep_descs		hs;
+
+	struct usb_ep			*notify;
+	struct usb_endpoint_descriptor	*notify_desc;
+	struct usb_request		*notify_req;
+	u8				notify_state;
+	bool				is_open;
+
+	struct ndp_parser_opts		*parser_opts;
+	bool				is_crc;
+
+	/*
+	 * for notification, it is accessed from both
+	 * callback and ethernet open/close
+	 */
+	spinlock_t			lock;
+};
+
+static inline struct f_ncm *func_to_ncm(struct usb_function *f)
+{
+	return container_of(f, struct f_ncm, port.func);
+}
+
+/* peak (theoretical) bulk transfer rate in bits-per-second */
+static inline unsigned ncm_bitrate(struct usb_gadget *g)
+{
+	if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
+		return 13 * 512 * 8 * 1000 * 8;
+	else
+		return 19 *  64 * 1 * 1000 * 8;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * We cannot group frames so use just the minimal size which ok to put
+ * one max-size ethernet frame.
+ * If the host can group frames, allow it to do that, 16K is selected,
+ * because it's used by default by the current linux host driver
+ */
+#define NTB_DEFAULT_IN_SIZE	USB_CDC_NCM_NTB_MIN_IN_SIZE
+#define NTB_OUT_SIZE		16384
+
+/*
+ * skbs of size less than that will not be alligned
+ * to NCM's dwNtbInMaxSize to save bus bandwidth
+ */
+
+#define	MAX_TX_NONFIXED		(512 * 3)
+
+#define FORMATS_SUPPORTED	(USB_CDC_NCM_NTB16_SUPPORTED |	\
+				 USB_CDC_NCM_NTB32_SUPPORTED)
+
+static struct usb_cdc_ncm_ntb_parameters ntb_parameters = {
+	.wLength = sizeof ntb_parameters,
+	.bmNtbFormatsSupported = cpu_to_le16(FORMATS_SUPPORTED),
+	.dwNtbInMaxSize = cpu_to_le32(NTB_DEFAULT_IN_SIZE),
+	.wNdpInDivisor = cpu_to_le16(4),
+	.wNdpInPayloadRemainder = cpu_to_le16(0),
+	.wNdpInAlignment = cpu_to_le16(4),
+
+	.dwNtbOutMaxSize = cpu_to_le32(NTB_OUT_SIZE),
+	.wNdpOutDivisor = cpu_to_le16(4),
+	.wNdpOutPayloadRemainder = cpu_to_le16(0),
+	.wNdpOutAlignment = cpu_to_le16(4),
+};
+
+/*
+ * Use wMaxPacketSize big enough to fit CDC_NOTIFY_SPEED_CHANGE in one
+ * packet, to simplify cancellation; and a big transfer interval, to
+ * waste less bandwidth.
+ */
+
+#define LOG2_STATUS_INTERVAL_MSEC	5	/* 1 << 5 == 32 msec */
+#define NCM_STATUS_BYTECOUNT		16	/* 8 byte header + data */
+
+static struct usb_interface_assoc_descriptor ncm_iad_desc __initdata = {
+	.bLength =		sizeof ncm_iad_desc,
+	.bDescriptorType =	USB_DT_INTERFACE_ASSOCIATION,
+
+	/* .bFirstInterface =	DYNAMIC, */
+	.bInterfaceCount =	2,	/* control + data */
+	.bFunctionClass =	USB_CLASS_COMM,
+	.bFunctionSubClass =	USB_CDC_SUBCLASS_NCM,
+	.bFunctionProtocol =	USB_CDC_PROTO_NONE,
+	/* .iFunction =		DYNAMIC */
+};
+
+/* interface descriptor: */
+
+static struct usb_interface_descriptor ncm_control_intf __initdata = {
+	.bLength =		sizeof ncm_control_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	/* .bInterfaceNumber = DYNAMIC */
+	.bNumEndpoints =	1,
+	.bInterfaceClass =	USB_CLASS_COMM,
+	.bInterfaceSubClass =	USB_CDC_SUBCLASS_NCM,
+	.bInterfaceProtocol =	USB_CDC_PROTO_NONE,
+	/* .iInterface = DYNAMIC */
+};
+
+static struct usb_cdc_header_desc ncm_header_desc __initdata = {
+	.bLength =		sizeof ncm_header_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_HEADER_TYPE,
+
+	.bcdCDC =		cpu_to_le16(0x0110),
+};
+
+static struct usb_cdc_union_desc ncm_union_desc __initdata = {
+	.bLength =		sizeof(ncm_union_desc),
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_UNION_TYPE,
+	/* .bMasterInterface0 =	DYNAMIC */
+	/* .bSlaveInterface0 =	DYNAMIC */
+};
+
+static struct usb_cdc_ether_desc ecm_desc __initdata = {
+	.bLength =		sizeof ecm_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_ETHERNET_TYPE,
+
+	/* this descriptor actually adds value, surprise! */
+	/* .iMACAddress = DYNAMIC */
+	.bmEthernetStatistics =	cpu_to_le32(0), /* no statistics */
+	.wMaxSegmentSize =	cpu_to_le16(ETH_FRAME_LEN),
+	.wNumberMCFilters =	cpu_to_le16(0),
+	.bNumberPowerFilters =	0,
+};
+
+#define NCAPS	(USB_CDC_NCM_NCAP_ETH_FILTER | USB_CDC_NCM_NCAP_CRC_MODE)
+
+static struct usb_cdc_ncm_desc ncm_desc __initdata = {
+	.bLength =		sizeof ncm_desc,
+	.bDescriptorType =	USB_DT_CS_INTERFACE,
+	.bDescriptorSubType =	USB_CDC_NCM_TYPE,
+
+	.bcdNcmVersion =	cpu_to_le16(0x0100),
+	/* can process SetEthernetPacketFilter */
+	.bmNetworkCapabilities = NCAPS,
+};
+
+/* the default data interface has no endpoints ... */
+
+static struct usb_interface_descriptor ncm_data_nop_intf __initdata = {
+	.bLength =		sizeof ncm_data_nop_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bInterfaceNumber =	1,
+	.bAlternateSetting =	0,
+	.bNumEndpoints =	0,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	USB_CDC_NCM_PROTO_NTB,
+	/* .iInterface = DYNAMIC */
+};
+
+/* ... but the "real" data interface has two bulk endpoints */
+
+static struct usb_interface_descriptor ncm_data_intf __initdata = {
+	.bLength =		sizeof ncm_data_intf,
+	.bDescriptorType =	USB_DT_INTERFACE,
+
+	.bInterfaceNumber =	1,
+	.bAlternateSetting =	1,
+	.bNumEndpoints =	2,
+	.bInterfaceClass =	USB_CLASS_CDC_DATA,
+	.bInterfaceSubClass =	0,
+	.bInterfaceProtocol =	USB_CDC_NCM_PROTO_NTB,
+	/* .iInterface = DYNAMIC */
+};
+
+/* full speed support: */
+
+static struct usb_endpoint_descriptor fs_ncm_notify_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(NCM_STATUS_BYTECOUNT),
+	.bInterval =		1 << LOG2_STATUS_INTERVAL_MSEC,
+};
+
+static struct usb_endpoint_descriptor fs_ncm_in_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor fs_ncm_out_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_descriptor_header *ncm_fs_function[] __initdata = {
+	(struct usb_descriptor_header *) &ncm_iad_desc,
+	/* CDC NCM control descriptors */
+	(struct usb_descriptor_header *) &ncm_control_intf,
+	(struct usb_descriptor_header *) &ncm_header_desc,
+	(struct usb_descriptor_header *) &ncm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+	(struct usb_descriptor_header *) &ncm_desc,
+	(struct usb_descriptor_header *) &fs_ncm_notify_desc,
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ncm_data_nop_intf,
+	(struct usb_descriptor_header *) &ncm_data_intf,
+	(struct usb_descriptor_header *) &fs_ncm_in_desc,
+	(struct usb_descriptor_header *) &fs_ncm_out_desc,
+	NULL,
+};
+
+/* high speed support: */
+
+static struct usb_endpoint_descriptor hs_ncm_notify_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_INT,
+	.wMaxPacketSize =	cpu_to_le16(NCM_STATUS_BYTECOUNT),
+	.bInterval =		LOG2_STATUS_INTERVAL_MSEC + 4,
+};
+static struct usb_endpoint_descriptor hs_ncm_in_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_IN,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_endpoint_descriptor hs_ncm_out_desc __initdata = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+
+	.bEndpointAddress =	USB_DIR_OUT,
+	.bmAttributes =		USB_ENDPOINT_XFER_BULK,
+	.wMaxPacketSize =	cpu_to_le16(512),
+};
+
+static struct usb_descriptor_header *ncm_hs_function[] __initdata = {
+	(struct usb_descriptor_header *) &ncm_iad_desc,
+	/* CDC NCM control descriptors */
+	(struct usb_descriptor_header *) &ncm_control_intf,
+	(struct usb_descriptor_header *) &ncm_header_desc,
+	(struct usb_descriptor_header *) &ncm_union_desc,
+	(struct usb_descriptor_header *) &ecm_desc,
+	(struct usb_descriptor_header *) &ncm_desc,
+	(struct usb_descriptor_header *) &hs_ncm_notify_desc,
+	/* data interface, altsettings 0 and 1 */
+	(struct usb_descriptor_header *) &ncm_data_nop_intf,
+	(struct usb_descriptor_header *) &ncm_data_intf,
+	(struct usb_descriptor_header *) &hs_ncm_in_desc,
+	(struct usb_descriptor_header *) &hs_ncm_out_desc,
+	NULL,
+};
+
+/* string descriptors: */
+
+#define STRING_CTRL_IDX	0
+#define STRING_MAC_IDX	1
+#define STRING_DATA_IDX	2
+#define STRING_IAD_IDX	3
+
+static struct usb_string ncm_string_defs[] = {
+	[STRING_CTRL_IDX].s = "CDC Network Control Model (NCM)",
+	[STRING_MAC_IDX].s = NULL /* DYNAMIC */,
+	[STRING_DATA_IDX].s = "CDC Network Data",
+	[STRING_IAD_IDX].s = "CDC NCM",
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings ncm_string_table = {
+	.language =		0x0409,	/* en-us */
+	.strings =		ncm_string_defs,
+};
+
+static struct usb_gadget_strings *ncm_strings[] = {
+	&ncm_string_table,
+	NULL,
+};
+
+/*
+ * Here are options for NCM Datagram Pointer table (NDP) parser.
+ * There are 2 different formats: NDP16 and NDP32 in the spec (ch. 3),
+ * in NDP16 offsets and sizes fields are 1 16bit word wide,
+ * in NDP32 -- 2 16bit words wide. Also signatures are different.
+ * To make the parser code the same, put the differences in the structure,
+ * and switch pointers to the structures when the format is changed.
+ */
+
+struct ndp_parser_opts {
+	u32		nth_sign;
+	u32		ndp_sign;
+	unsigned	nth_size;
+	unsigned	ndp_size;
+	unsigned	ndplen_align;
+	/* sizes in u16 units */
+	unsigned	dgram_item_len; /* index or length */
+	unsigned	block_length;
+	unsigned	fp_index;
+	unsigned	reserved1;
+	unsigned	reserved2;
+	unsigned	next_fp_index;
+};
+
+#define INIT_NDP16_OPTS {					\
+		.nth_sign = USB_CDC_NCM_NTH16_SIGN,		\
+		.ndp_sign = USB_CDC_NCM_NDP16_NOCRC_SIGN,	\
+		.nth_size = sizeof(struct usb_cdc_ncm_nth16),	\
+		.ndp_size = sizeof(struct usb_cdc_ncm_ndp16),	\
+		.ndplen_align = 4,				\
+		.dgram_item_len = 1,				\
+		.block_length = 1,				\
+		.fp_index = 1,					\
+		.reserved1 = 0,					\
+		.reserved2 = 0,					\
+		.next_fp_index = 1,				\
+	}
+
+
+#define INIT_NDP32_OPTS {					\
+		.nth_sign = USB_CDC_NCM_NTH32_SIGN,		\
+		.ndp_sign = USB_CDC_NCM_NDP32_NOCRC_SIGN,	\
+		.nth_size = sizeof(struct usb_cdc_ncm_nth32),	\
+		.ndp_size = sizeof(struct usb_cdc_ncm_ndp32),	\
+		.ndplen_align = 8,				\
+		.dgram_item_len = 2,				\
+		.block_length = 2,				\
+		.fp_index = 2,					\
+		.reserved1 = 1,					\
+		.reserved2 = 2,					\
+		.next_fp_index = 2,				\
+	}
+
+static struct ndp_parser_opts ndp16_opts = INIT_NDP16_OPTS;
+static struct ndp_parser_opts ndp32_opts = INIT_NDP32_OPTS;
+
+static inline void put_ncm(__le16 **p, unsigned size, unsigned val)
+{
+	switch (size) {
+	case 1:
+		put_unaligned_le16((u16)val, *p);
+		break;
+	case 2:
+		put_unaligned_le32((u32)val, *p);
+
+		break;
+	default:
+		BUG();
+	}
+
+	*p += size;
+}
+
+static inline unsigned get_ncm(__le16 **p, unsigned size)
+{
+	unsigned tmp;
+
+	switch (size) {
+	case 1:
+		tmp = get_unaligned_le16(*p);
+		break;
+	case 2:
+		tmp = get_unaligned_le32(*p);
+		break;
+	default:
+		BUG();
+	}
+
+	*p += size;
+	return tmp;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline void ncm_reset_values(struct f_ncm *ncm)
+{
+	ncm->parser_opts = &ndp16_opts;
+	ncm->is_crc = false;
+	ncm->port.cdc_filter = DEFAULT_FILTER;
+
+	/* doesn't make sense for ncm, fixed size used */
+	ncm->port.header_len = 0;
+
+	ncm->port.fixed_out_len = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize);
+	ncm->port.fixed_in_len = NTB_DEFAULT_IN_SIZE;
+}
+
+/*
+ * Context: ncm->lock held
+ */
+static void ncm_do_notify(struct f_ncm *ncm)
+{
+	struct usb_request		*req = ncm->notify_req;
+	struct usb_cdc_notification	*event;
+	struct usb_composite_dev	*cdev = ncm->port.func.config->cdev;
+	__le32				*data;
+	int				status;
+
+	/* notification already in flight? */
+	if (!req)
+		return;
+
+	event = req->buf;
+	switch (ncm->notify_state) {
+	case NCM_NOTIFY_NONE:
+		return;
+
+	case NCM_NOTIFY_CONNECT:
+		event->bNotificationType = USB_CDC_NOTIFY_NETWORK_CONNECTION;
+		if (ncm->is_open)
+			event->wValue = cpu_to_le16(1);
+		else
+			event->wValue = cpu_to_le16(0);
+		event->wLength = 0;
+		req->length = sizeof *event;
+
+		DBG(cdev, "notify connect %s\n",
+				ncm->is_open ? "true" : "false");
+		ncm->notify_state = NCM_NOTIFY_NONE;
+		break;
+
+	case NCM_NOTIFY_SPEED:
+		event->bNotificationType = USB_CDC_NOTIFY_SPEED_CHANGE;
+		event->wValue = cpu_to_le16(0);
+		event->wLength = cpu_to_le16(8);
+		req->length = NCM_STATUS_BYTECOUNT;
+
+		/* SPEED_CHANGE data is up/down speeds in bits/sec */
+		data = req->buf + sizeof *event;
+		data[0] = cpu_to_le32(ncm_bitrate(cdev->gadget));
+		data[1] = data[0];
+
+		DBG(cdev, "notify speed %d\n", ncm_bitrate(cdev->gadget));
+		ncm->notify_state = NCM_NOTIFY_CONNECT;
+		break;
+	}
+	event->bmRequestType = 0xA1;
+	event->wIndex = cpu_to_le16(ncm->ctrl_id);
+
+	ncm->notify_req = NULL;
+	/*
+	 * In double buffering if there is a space in FIFO,
+	 * completion callback can be called right after the call,
+	 * so unlocking
+	 */
+	spin_unlock(&ncm->lock);
+	status = usb_ep_queue(ncm->notify, req, GFP_ATOMIC);
+	spin_lock(&ncm->lock);
+	if (status < 0) {
+		ncm->notify_req = req;
+		DBG(cdev, "notify --> %d\n", status);
+	}
+}
+
+/*
+ * Context: ncm->lock held
+ */
+static void ncm_notify(struct f_ncm *ncm)
+{
+	/*
+	 * NOTE on most versions of Linux, host side cdc-ethernet
+	 * won't listen for notifications until its netdevice opens.
+	 * The first notification then sits in the FIFO for a long
+	 * time, and the second one is queued.
+	 *
+	 * If ncm_notify() is called before the second (CONNECT)
+	 * notification is sent, then it will reset to send the SPEED
+	 * notificaion again (and again, and again), but it's not a problem
+	 */
+	ncm->notify_state = NCM_NOTIFY_SPEED;
+	ncm_do_notify(ncm);
+}
+
+static void ncm_notify_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	struct f_ncm			*ncm = req->context;
+	struct usb_composite_dev	*cdev = ncm->port.func.config->cdev;
+	struct usb_cdc_notification	*event = req->buf;
+
+	spin_lock(&ncm->lock);
+	switch (req->status) {
+	case 0:
+		VDBG(cdev, "Notification %02x sent\n",
+		     event->bNotificationType);
+		break;
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		ncm->notify_state = NCM_NOTIFY_NONE;
+		break;
+	default:
+		DBG(cdev, "event %02x --> %d\n",
+			event->bNotificationType, req->status);
+		break;
+	}
+	ncm->notify_req = req;
+	ncm_do_notify(ncm);
+	spin_unlock(&ncm->lock);
+}
+
+static void ncm_ep0out_complete(struct usb_ep *ep, struct usb_request *req)
+{
+	/* now for SET_NTB_INPUT_SIZE only */
+	unsigned		in_size;
+	struct usb_function	*f = req->context;
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = ep->driver_data;
+
+	req->context = NULL;
+	if (req->status || req->actual != req->length) {
+		DBG(cdev, "Bad control-OUT transfer\n");
+		goto invalid;
+	}
+
+	in_size = get_unaligned_le32(req->buf);
+	if (in_size < USB_CDC_NCM_NTB_MIN_IN_SIZE ||
+	    in_size > le32_to_cpu(ntb_parameters.dwNtbInMaxSize)) {
+		DBG(cdev, "Got wrong INPUT SIZE (%d) from host\n", in_size);
+		goto invalid;
+	}
+
+	ncm->port.fixed_in_len = in_size;
+	VDBG(cdev, "Set NTB INPUT SIZE %d\n", in_size);
+	return;
+
+invalid:
+	usb_ep_set_halt(ep);
+	return;
+}
+
+static int ncm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+	struct usb_request	*req = cdev->req;
+	int			value = -EOPNOTSUPP;
+	u16			w_index = le16_to_cpu(ctrl->wIndex);
+	u16			w_value = le16_to_cpu(ctrl->wValue);
+	u16			w_length = le16_to_cpu(ctrl->wLength);
+
+	/*
+	 * composite driver infrastructure handles everything except
+	 * CDC class messages; interface activation uses set_alt().
+	 */
+	switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+			| USB_CDC_SET_ETHERNET_PACKET_FILTER:
+		/*
+		 * see 6.2.30: no data, wIndex = interface,
+		 * wValue = packet filter bitmap
+		 */
+		if (w_length != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		DBG(cdev, "packet filter %02x\n", w_value);
+		/*
+		 * REVISIT locking of cdc_filter.  This assumes the UDC
+		 * driver won't have a concurrent packet TX irq running on
+		 * another CPU; or that if it does, this write is atomic...
+		 */
+		ncm->port.cdc_filter = w_value;
+		value = 0;
+		break;
+	/*
+	 * and optionally:
+	 * case USB_CDC_SEND_ENCAPSULATED_COMMAND:
+	 * case USB_CDC_GET_ENCAPSULATED_RESPONSE:
+	 * case USB_CDC_SET_ETHERNET_MULTICAST_FILTERS:
+	 * case USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER:
+	 * case USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER:
+	 * case USB_CDC_GET_ETHERNET_STATISTIC:
+	 */
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_NTB_PARAMETERS:
+
+		if (w_length == 0 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		value = w_length > sizeof ntb_parameters ?
+			sizeof ntb_parameters : w_length;
+		memcpy(req->buf, &ntb_parameters, value);
+		VDBG(cdev, "Host asked NTB parameters\n");
+		break;
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_NTB_INPUT_SIZE:
+
+		if (w_length < 4 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		put_unaligned_le32(ncm->port.fixed_in_len, req->buf);
+		value = 4;
+		VDBG(cdev, "Host asked INPUT SIZE, sending %d\n",
+		     ncm->port.fixed_in_len);
+		break;
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_SET_NTB_INPUT_SIZE:
+	{
+		if (w_length != 4 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		req->complete = ncm_ep0out_complete;
+		req->length = w_length;
+		req->context = f;
+
+		value = req->length;
+		break;
+	}
+
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_NTB_FORMAT:
+	{
+		uint16_t format;
+
+		if (w_length < 2 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		format = (ncm->parser_opts == &ndp16_opts) ? 0x0000 : 0x0001;
+		put_unaligned_le16(format, req->buf);
+		value = 2;
+		VDBG(cdev, "Host asked NTB FORMAT, sending %d\n", format);
+		break;
+	}
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_SET_NTB_FORMAT:
+	{
+		if (w_length != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		switch (w_value) {
+		case 0x0000:
+			ncm->parser_opts = &ndp16_opts;
+			DBG(cdev, "NCM16 selected\n");
+			break;
+		case 0x0001:
+			ncm->parser_opts = &ndp32_opts;
+			DBG(cdev, "NCM32 selected\n");
+			break;
+		default:
+			goto invalid;
+		}
+		value = 0;
+		break;
+	}
+	case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_GET_CRC_MODE:
+	{
+		uint16_t is_crc;
+
+		if (w_length < 2 || w_value != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		is_crc = ncm->is_crc ? 0x0001 : 0x0000;
+		put_unaligned_le16(is_crc, req->buf);
+		value = 2;
+		VDBG(cdev, "Host asked CRC MODE, sending %d\n", is_crc);
+		break;
+	}
+
+	case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
+		| USB_CDC_SET_CRC_MODE:
+	{
+		int ndp_hdr_crc = 0;
+
+		if (w_length != 0 || w_index != ncm->ctrl_id)
+			goto invalid;
+		switch (w_value) {
+		case 0x0000:
+			ncm->is_crc = false;
+			ndp_hdr_crc = NCM_NDP_HDR_NOCRC;
+			DBG(cdev, "non-CRC mode selected\n");
+			break;
+		case 0x0001:
+			ncm->is_crc = true;
+			ndp_hdr_crc = NCM_NDP_HDR_CRC;
+			DBG(cdev, "CRC mode selected\n");
+			break;
+		default:
+			goto invalid;
+		}
+		ncm->parser_opts->ndp_sign &= ~NCM_NDP_HDR_CRC_MASK;
+		ncm->parser_opts->ndp_sign |= ndp_hdr_crc;
+		value = 0;
+		break;
+	}
+
+	/* and disabled in ncm descriptor: */
+	/* case USB_CDC_GET_NET_ADDRESS: */
+	/* case USB_CDC_SET_NET_ADDRESS: */
+	/* case USB_CDC_GET_MAX_DATAGRAM_SIZE: */
+	/* case USB_CDC_SET_MAX_DATAGRAM_SIZE: */
+
+	default:
+invalid:
+		DBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+	}
+
+	/* respond with data transfer or status phase? */
+	if (value >= 0) {
+		DBG(cdev, "ncm req%02x.%02x v%04x i%04x l%d\n",
+			ctrl->bRequestType, ctrl->bRequest,
+			w_value, w_index, w_length);
+		req->zero = 0;
+		req->length = value;
+		value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
+		if (value < 0)
+			ERROR(cdev, "ncm req %02x.%02x response err %d\n",
+					ctrl->bRequestType, ctrl->bRequest,
+					value);
+	}
+
+	/* device either stalls (value < 0) or reports success */
+	return value;
+}
+
+
+static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	/* Control interface has only altsetting 0 */
+	if (intf == ncm->ctrl_id) {
+		if (alt != 0)
+			goto fail;
+
+		if (ncm->notify->driver_data) {
+			DBG(cdev, "reset ncm control %d\n", intf);
+			usb_ep_disable(ncm->notify);
+		} else {
+			DBG(cdev, "init ncm ctrl %d\n", intf);
+			ncm->notify_desc = ep_choose(cdev->gadget,
+					ncm->hs.notify,
+					ncm->fs.notify);
+		}
+		usb_ep_enable(ncm->notify, ncm->notify_desc);
+		ncm->notify->driver_data = ncm;
+
+	/* Data interface has two altsettings, 0 and 1 */
+	} else if (intf == ncm->data_id) {
+		if (alt > 1)
+			goto fail;
+
+		if (ncm->port.in_ep->driver_data) {
+			DBG(cdev, "reset ncm\n");
+			gether_disconnect(&ncm->port);
+			ncm_reset_values(ncm);
+		}
+
+		/*
+		 * CDC Network only sends data in non-default altsettings.
+		 * Changing altsettings resets filters, statistics, etc.
+		 */
+		if (alt == 1) {
+			struct net_device	*net;
+
+			if (!ncm->port.in) {
+				DBG(cdev, "init ncm\n");
+				ncm->port.in = ep_choose(cdev->gadget,
+							 ncm->hs.in,
+							 ncm->fs.in);
+				ncm->port.out = ep_choose(cdev->gadget,
+							  ncm->hs.out,
+							  ncm->fs.out);
+			}
+
+			/* TODO */
+			/* Enable zlps by default for NCM conformance;
+			 * override for musb_hdrc (avoids txdma ovhead)
+			 */
+			ncm->port.is_zlp_ok = !(
+				gadget_is_musbhdrc(cdev->gadget)
+				);
+			ncm->port.cdc_filter = DEFAULT_FILTER;
+			DBG(cdev, "activate ncm\n");
+			net = gether_connect(&ncm->port);
+			if (IS_ERR(net))
+				return PTR_ERR(net);
+		}
+
+		spin_lock(&ncm->lock);
+		ncm_notify(ncm);
+		spin_unlock(&ncm->lock);
+	} else
+		goto fail;
+
+	return 0;
+fail:
+	return -EINVAL;
+}
+
+/*
+ * Because the data interface supports multiple altsettings,
+ * this NCM function *MUST* implement a get_alt() method.
+ */
+static int ncm_get_alt(struct usb_function *f, unsigned intf)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+
+	if (intf == ncm->ctrl_id)
+		return 0;
+	return ncm->port.in_ep->driver_data ? 1 : 0;
+}
+
+static struct sk_buff *ncm_wrap_ntb(struct gether *port,
+				    struct sk_buff *skb)
+{
+	struct f_ncm	*ncm = func_to_ncm(&port->func);
+	struct sk_buff	*skb2;
+	int		ncb_len = 0;
+	__le16		*tmp;
+	int		div = ntb_parameters.wNdpInDivisor;
+	int		rem = ntb_parameters.wNdpInPayloadRemainder;
+	int		pad;
+	int		ndp_align = ntb_parameters.wNdpInAlignment;
+	int		ndp_pad;
+	unsigned	max_size = ncm->port.fixed_in_len;
+	struct ndp_parser_opts *opts = ncm->parser_opts;
+	unsigned	crc_len = ncm->is_crc ? sizeof(uint32_t) : 0;
+
+	ncb_len += opts->nth_size;
+	ndp_pad = ALIGN(ncb_len, ndp_align) - ncb_len;
+	ncb_len += ndp_pad;
+	ncb_len += opts->ndp_size;
+	ncb_len += 2 * 2 * opts->dgram_item_len; /* Datagram entry */
+	ncb_len += 2 * 2 * opts->dgram_item_len; /* Zero datagram entry */
+	pad = ALIGN(ncb_len, div) + rem - ncb_len;
+	ncb_len += pad;
+
+	if (ncb_len + skb->len + crc_len > max_size) {
+		dev_kfree_skb_any(skb);
+		return NULL;
+	}
+
+	skb2 = skb_copy_expand(skb, ncb_len,
+			       max_size - skb->len - ncb_len - crc_len,
+			       GFP_ATOMIC);
+	dev_kfree_skb_any(skb);
+	if (!skb2)
+		return NULL;
+
+	skb = skb2;
+
+	tmp = (void *) skb_push(skb, ncb_len);
+	memset(tmp, 0, ncb_len);
+
+	put_unaligned_le32(opts->nth_sign, tmp); /* dwSignature */
+	tmp += 2;
+	/* wHeaderLength */
+	put_unaligned_le16(opts->nth_size, tmp++);
+	tmp++; /* skip wSequence */
+	put_ncm(&tmp, opts->block_length, skb->len); /* (d)wBlockLength */
+	/* (d)wFpIndex */
+	/* the first pointer is right after the NTH + align */
+	put_ncm(&tmp, opts->fp_index, opts->nth_size + ndp_pad);
+
+	tmp = (void *)tmp + ndp_pad;
+
+	/* NDP */
+	put_unaligned_le32(opts->ndp_sign, tmp); /* dwSignature */
+	tmp += 2;
+	/* wLength */
+	put_unaligned_le16(ncb_len - opts->nth_size - pad, tmp++);
+
+	tmp += opts->reserved1;
+	tmp += opts->next_fp_index; /* skip reserved (d)wNextFpIndex */
+	tmp += opts->reserved2;
+
+	if (ncm->is_crc) {
+		uint32_t crc;
+
+		crc = ~crc32_le(~0,
+				skb->data + ncb_len,
+				skb->len - ncb_len);
+		put_unaligned_le32(crc, skb->data + skb->len);
+		skb_put(skb, crc_len);
+	}
+
+	/* (d)wDatagramIndex[0] */
+	put_ncm(&tmp, opts->dgram_item_len, ncb_len);
+	/* (d)wDatagramLength[0] */
+	put_ncm(&tmp, opts->dgram_item_len, skb->len - ncb_len);
+	/* (d)wDatagramIndex[1] and  (d)wDatagramLength[1] already zeroed */
+
+	if (skb->len > MAX_TX_NONFIXED)
+		memset(skb_put(skb, max_size - skb->len),
+		       0, max_size - skb->len);
+
+	return skb;
+}
+
+static int ncm_unwrap_ntb(struct gether *port,
+			  struct sk_buff *skb,
+			  struct sk_buff_head *list)
+{
+	struct f_ncm	*ncm = func_to_ncm(&port->func);
+	__le16		*tmp = (void *) skb->data;
+	unsigned	index, index2;
+	unsigned	dg_len, dg_len2;
+	unsigned	ndp_len;
+	struct sk_buff	*skb2;
+	int		ret = -EINVAL;
+	unsigned	max_size = le32_to_cpu(ntb_parameters.dwNtbOutMaxSize);
+	struct ndp_parser_opts *opts = ncm->parser_opts;
+	unsigned	crc_len = ncm->is_crc ? sizeof(uint32_t) : 0;
+	int		dgram_counter;
+
+	/* dwSignature */
+	if (get_unaligned_le32(tmp) != opts->nth_sign) {
+		INFO(port->func.config->cdev, "Wrong NTH SIGN, skblen %d\n",
+			skb->len);
+		print_hex_dump(KERN_INFO, "HEAD:", DUMP_PREFIX_ADDRESS, 32, 1,
+			       skb->data, 32, false);
+
+		goto err;
+	}
+	tmp += 2;
+	/* wHeaderLength */
+	if (get_unaligned_le16(tmp++) != opts->nth_size) {
+		INFO(port->func.config->cdev, "Wrong NTB headersize\n");
+		goto err;
+	}
+	tmp++; /* skip wSequence */
+
+	/* (d)wBlockLength */
+	if (get_ncm(&tmp, opts->block_length) > max_size) {
+		INFO(port->func.config->cdev, "OUT size exceeded\n");
+		goto err;
+	}
+
+	index = get_ncm(&tmp, opts->fp_index);
+	/* NCM 3.2 */
+	if (((index % 4) != 0) && (index < opts->nth_size)) {
+		INFO(port->func.config->cdev, "Bad index: %x\n",
+			index);
+		goto err;
+	}
+
+	/* walk through NDP */
+	tmp = ((void *)skb->data) + index;
+	if (get_unaligned_le32(tmp) != opts->ndp_sign) {
+		INFO(port->func.config->cdev, "Wrong NDP SIGN\n");
+		goto err;
+	}
+	tmp += 2;
+
+	ndp_len = get_unaligned_le16(tmp++);
+	/*
+	 * NCM 3.3.1
+	 * entry is 2 items
+	 * item size is 16/32 bits, opts->dgram_item_len * 2 bytes
+	 * minimal: struct usb_cdc_ncm_ndpX + normal entry + zero entry
+	 */
+	if ((ndp_len < opts->ndp_size + 2 * 2 * (opts->dgram_item_len * 2))
+	    || (ndp_len % opts->ndplen_align != 0)) {
+		INFO(port->func.config->cdev, "Bad NDP length: %x\n", ndp_len);
+		goto err;
+	}
+	tmp += opts->reserved1;
+	tmp += opts->next_fp_index; /* skip reserved (d)wNextFpIndex */
+	tmp += opts->reserved2;
+
+	ndp_len -= opts->ndp_size;
+	index2 = get_ncm(&tmp, opts->dgram_item_len);
+	dg_len2 = get_ncm(&tmp, opts->dgram_item_len);
+	dgram_counter = 0;
+
+	do {
+		index = index2;
+		dg_len = dg_len2;
+		if (dg_len < 14 + crc_len) { /* ethernet header + crc */
+			INFO(port->func.config->cdev, "Bad dgram length: %x\n",
+			     dg_len);
+			goto err;
+		}
+		if (ncm->is_crc) {
+			uint32_t crc, crc2;
+
+			crc = get_unaligned_le32(skb->data +
+						 index + dg_len - crc_len);
+			crc2 = ~crc32_le(~0,
+					 skb->data + index,
+					 dg_len - crc_len);
+			if (crc != crc2) {
+				INFO(port->func.config->cdev, "Bad CRC\n");
+				goto err;
+			}
+		}
+
+		index2 = get_ncm(&tmp, opts->dgram_item_len);
+		dg_len2 = get_ncm(&tmp, opts->dgram_item_len);
+
+		if (index2 == 0 || dg_len2 == 0) {
+			skb2 = skb;
+		} else {
+			skb2 = skb_clone(skb, GFP_ATOMIC);
+			if (skb2 == NULL)
+				goto err;
+		}
+
+		if (!skb_pull(skb2, index)) {
+			ret = -EOVERFLOW;
+			goto err;
+		}
+
+		skb_trim(skb2, dg_len - crc_len);
+		skb_queue_tail(list, skb2);
+
+		ndp_len -= 2 * (opts->dgram_item_len * 2);
+
+		dgram_counter++;
+
+		if (index2 == 0 || dg_len2 == 0)
+			break;
+	} while (ndp_len > 2 * (opts->dgram_item_len * 2)); /* zero entry */
+
+	VDBG(port->func.config->cdev,
+	     "Parsed NTB with %d frames\n", dgram_counter);
+	return 0;
+err:
+	skb_queue_purge(list);
+	dev_kfree_skb_any(skb);
+	return ret;
+}
+
+static void ncm_disable(struct usb_function *f)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+	struct usb_composite_dev *cdev = f->config->cdev;
+
+	DBG(cdev, "ncm deactivated\n");
+
+	if (ncm->port.in_ep->driver_data)
+		gether_disconnect(&ncm->port);
+
+	if (ncm->notify->driver_data) {
+		usb_ep_disable(ncm->notify);
+		ncm->notify->driver_data = NULL;
+		ncm->notify_desc = NULL;
+	}
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Callbacks let us notify the host about connect/disconnect when the
+ * net device is opened or closed.
+ *
+ * For testing, note that link states on this side include both opened
+ * and closed variants of:
+ *
+ *   - disconnected/unconfigured
+ *   - configured but inactive (data alt 0)
+ *   - configured and active (data alt 1)
+ *
+ * Each needs to be tested with unplug, rmmod, SET_CONFIGURATION, and
+ * SET_INTERFACE (altsetting).  Remember also that "configured" doesn't
+ * imply the host is actually polling the notification endpoint, and
+ * likewise that "active" doesn't imply it's actually using the data
+ * endpoints for traffic.
+ */
+
+static void ncm_open(struct gether *geth)
+{
+	struct f_ncm		*ncm = func_to_ncm(&geth->func);
+
+	DBG(ncm->port.func.config->cdev, "%s\n", __func__);
+
+	spin_lock(&ncm->lock);
+	ncm->is_open = true;
+	ncm_notify(ncm);
+	spin_unlock(&ncm->lock);
+}
+
+static void ncm_close(struct gether *geth)
+{
+	struct f_ncm		*ncm = func_to_ncm(&geth->func);
+
+	DBG(ncm->port.func.config->cdev, "%s\n", __func__);
+
+	spin_lock(&ncm->lock);
+	ncm->is_open = false;
+	ncm_notify(ncm);
+	spin_unlock(&ncm->lock);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* ethernet function driver setup/binding */
+
+static int __init
+ncm_bind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct usb_composite_dev *cdev = c->cdev;
+	struct f_ncm		*ncm = func_to_ncm(f);
+	int			status;
+	struct usb_ep		*ep;
+
+	/* allocate instance-specific interface IDs */
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ncm->ctrl_id = status;
+	ncm_iad_desc.bFirstInterface = status;
+
+	ncm_control_intf.bInterfaceNumber = status;
+	ncm_union_desc.bMasterInterface0 = status;
+
+	status = usb_interface_id(c, f);
+	if (status < 0)
+		goto fail;
+	ncm->data_id = status;
+
+	ncm_data_nop_intf.bInterfaceNumber = status;
+	ncm_data_intf.bInterfaceNumber = status;
+	ncm_union_desc.bSlaveInterface0 = status;
+
+	status = -ENODEV;
+
+	/* allocate instance-specific endpoints */
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_in_desc);
+	if (!ep)
+		goto fail;
+	ncm->port.in_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_out_desc);
+	if (!ep)
+		goto fail;
+	ncm->port.out_ep = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	ep = usb_ep_autoconfig(cdev->gadget, &fs_ncm_notify_desc);
+	if (!ep)
+		goto fail;
+	ncm->notify = ep;
+	ep->driver_data = cdev;	/* claim */
+
+	status = -ENOMEM;
+
+	/* allocate notification request and buffer */
+	ncm->notify_req = usb_ep_alloc_request(ep, GFP_KERNEL);
+	if (!ncm->notify_req)
+		goto fail;
+	ncm->notify_req->buf = kmalloc(NCM_STATUS_BYTECOUNT, GFP_KERNEL);
+	if (!ncm->notify_req->buf)
+		goto fail;
+	ncm->notify_req->context = ncm;
+	ncm->notify_req->complete = ncm_notify_complete;
+
+	/* copy descriptors, and track endpoint copies */
+	f->descriptors = usb_copy_descriptors(ncm_fs_function);
+	if (!f->descriptors)
+		goto fail;
+
+	ncm->fs.in = usb_find_endpoint(ncm_fs_function,
+			f->descriptors, &fs_ncm_in_desc);
+	ncm->fs.out = usb_find_endpoint(ncm_fs_function,
+			f->descriptors, &fs_ncm_out_desc);
+	ncm->fs.notify = usb_find_endpoint(ncm_fs_function,
+			f->descriptors, &fs_ncm_notify_desc);
+
+	/*
+	 * support all relevant hardware speeds... we expect that when
+	 * hardware is dual speed, all bulk-capable endpoints work at
+	 * both speeds
+	 */
+	if (gadget_is_dualspeed(c->cdev->gadget)) {
+		hs_ncm_in_desc.bEndpointAddress =
+				fs_ncm_in_desc.bEndpointAddress;
+		hs_ncm_out_desc.bEndpointAddress =
+				fs_ncm_out_desc.bEndpointAddress;
+		hs_ncm_notify_desc.bEndpointAddress =
+				fs_ncm_notify_desc.bEndpointAddress;
+
+		/* copy descriptors, and track endpoint copies */
+		f->hs_descriptors = usb_copy_descriptors(ncm_hs_function);
+		if (!f->hs_descriptors)
+			goto fail;
+
+		ncm->hs.in = usb_find_endpoint(ncm_hs_function,
+				f->hs_descriptors, &hs_ncm_in_desc);
+		ncm->hs.out = usb_find_endpoint(ncm_hs_function,
+				f->hs_descriptors, &hs_ncm_out_desc);
+		ncm->hs.notify = usb_find_endpoint(ncm_hs_function,
+				f->hs_descriptors, &hs_ncm_notify_desc);
+	}
+
+	/*
+	 * NOTE:  all that is done without knowing or caring about
+	 * the network link ... which is unavailable to this code
+	 * until we're activated via set_alt().
+	 */
+
+	ncm->port.open = ncm_open;
+	ncm->port.close = ncm_close;
+
+	DBG(cdev, "CDC Network: %s speed IN/%s OUT/%s NOTIFY/%s\n",
+			gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
+			ncm->port.in_ep->name, ncm->port.out_ep->name,
+			ncm->notify->name);
+	return 0;
+
+fail:
+	if (f->descriptors)
+		usb_free_descriptors(f->descriptors);
+
+	if (ncm->notify_req) {
+		kfree(ncm->notify_req->buf);
+		usb_ep_free_request(ncm->notify, ncm->notify_req);
+	}
+
+	/* we might as well release our claims on endpoints */
+	if (ncm->notify)
+		ncm->notify->driver_data = NULL;
+	if (ncm->port.out)
+		ncm->port.out_ep->driver_data = NULL;
+	if (ncm->port.in)
+		ncm->port.in_ep->driver_data = NULL;
+
+	ERROR(cdev, "%s: can't bind, err %d\n", f->name, status);
+
+	return status;
+}
+
+static void
+ncm_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+	struct f_ncm		*ncm = func_to_ncm(f);
+
+	DBG(c->cdev, "ncm unbind\n");
+
+	if (gadget_is_dualspeed(c->cdev->gadget))
+		usb_free_descriptors(f->hs_descriptors);
+	usb_free_descriptors(f->descriptors);
+
+	kfree(ncm->notify_req->buf);
+	usb_ep_free_request(ncm->notify, ncm->notify_req);
+
+	ncm_string_defs[1].s = NULL;
+	kfree(ncm);
+}
+
+/**
+ * ncm_bind_config - add CDC Network link to a configuration
+ * @c: the configuration to support the network link
+ * @ethaddr: a buffer in which the ethernet address of the host side
+ *	side of the link was recorded
+ * Context: single threaded during gadget setup
+ *
+ * Returns zero on success, else negative errno.
+ *
+ * Caller must have called @gether_setup().  Caller is also responsible
+ * for calling @gether_cleanup() before module unload.
+ */
+int __init ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
+{
+	struct f_ncm	*ncm;
+	int		status;
+
+	if (!can_support_ecm(c->cdev->gadget) || !ethaddr)
+		return -EINVAL;
+
+	/* maybe allocate device-global string IDs */
+	if (ncm_string_defs[0].id == 0) {
+
+		/* control interface label */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		ncm_string_defs[STRING_CTRL_IDX].id = status;
+		ncm_control_intf.iInterface = status;
+
+		/* data interface label */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		ncm_string_defs[STRING_DATA_IDX].id = status;
+		ncm_data_nop_intf.iInterface = status;
+		ncm_data_intf.iInterface = status;
+
+		/* MAC address */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		ncm_string_defs[STRING_MAC_IDX].id = status;
+		ecm_desc.iMACAddress = status;
+
+		/* IAD */
+		status = usb_string_id(c->cdev);
+		if (status < 0)
+			return status;
+		ncm_string_defs[STRING_IAD_IDX].id = status;
+		ncm_iad_desc.iFunction = status;
+	}
+
+	/* allocate and initialize one new instance */
+	ncm = kzalloc(sizeof *ncm, GFP_KERNEL);
+	if (!ncm)
+		return -ENOMEM;
+
+	/* export host's Ethernet address in CDC format */
+	snprintf(ncm->ethaddr, sizeof ncm->ethaddr,
+		"%02X%02X%02X%02X%02X%02X",
+		ethaddr[0], ethaddr[1], ethaddr[2],
+		ethaddr[3], ethaddr[4], ethaddr[5]);
+	ncm_string_defs[1].s = ncm->ethaddr;
+
+	spin_lock_init(&ncm->lock);
+	ncm_reset_values(ncm);
+	ncm->port.is_fixed = true;
+
+	ncm->port.func.name = "cdc_network";
+	ncm->port.func.strings = ncm_strings;
+	/* descriptors are per-instance copies */
+	ncm->port.func.bind = ncm_bind;
+	ncm->port.func.unbind = ncm_unbind;
+	ncm->port.func.set_alt = ncm_set_alt;
+	ncm->port.func.get_alt = ncm_get_alt;
+	ncm->port.func.setup = ncm_setup;
+	ncm->port.func.disable = ncm_disable;
+
+	ncm->port.wrap = ncm_wrap_ntb;
+	ncm->port.unwrap = ncm_unwrap_ntb;
+
+	status = usb_add_function(c, &ncm->port.func);
+	if (status) {
+		ncm_string_defs[1].s = NULL;
+		kfree(ncm);
+	}
+	return status;
+}
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index d4fdf65fb92..a6eacb59571 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -3392,25 +3392,28 @@ static int __init fsg_bind(struct usb_gadget *gadget)
 		dev_set_name(&curlun->dev,"%s-lun%d",
 			     dev_name(&gadget->dev), i);
 
-		if ((rc = device_register(&curlun->dev)) != 0) {
+		kref_get(&fsg->ref);
+		rc = device_register(&curlun->dev);
+		if (rc) {
 			INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
-			goto out;
-		}
-		if ((rc = device_create_file(&curlun->dev,
-					&dev_attr_ro)) != 0 ||
-				(rc = device_create_file(&curlun->dev,
-					&dev_attr_nofua)) != 0 ||
-				(rc = device_create_file(&curlun->dev,
-					&dev_attr_file)) != 0) {
-			device_unregister(&curlun->dev);
+			put_device(&curlun->dev);
 			goto out;
 		}
 		curlun->registered = 1;
-		kref_get(&fsg->ref);
+
+		rc = device_create_file(&curlun->dev, &dev_attr_ro);
+		if (rc)
+			goto out;
+		rc = device_create_file(&curlun->dev, &dev_attr_nofua);
+		if (rc)
+			goto out;
+		rc = device_create_file(&curlun->dev, &dev_attr_file);
+		if (rc)
+			goto out;
 
 		if (mod_data.file[i] && *mod_data.file[i]) {
-			if ((rc = fsg_lun_open(curlun,
-					mod_data.file[i])) != 0)
+			rc = fsg_lun_open(curlun, mod_data.file[i]);
+			if (rc)
 				goto out;
 		} else if (!mod_data.removable) {
 			ERROR(fsg, "no file given for LUN%d\n", i);
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 5bdbfe61985..77b1eb57702 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -93,9 +93,9 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
 
 	/* workaround ENGcm09152 for i.MX35 */
 	if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
-		v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+		v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
 				USBPHYCTRL_OTGBASE_OFFSET));
-		writel(v | USBPHYCTRL_EVDO, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
+		writel(v | USBPHYCTRL_EVDO, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
 				USBPHYCTRL_OTGBASE_OFFSET));
 	}
 #endif
diff --git a/drivers/usb/gadget/g_ffs.c b/drivers/usb/gadget/g_ffs.c
index af75e362084..ebf6970a10b 100644
--- a/drivers/usb/gadget/g_ffs.c
+++ b/drivers/usb/gadget/g_ffs.c
@@ -1,7 +1,29 @@
+/*
+ * g_ffs.c -- user mode file system API for USB composite function controllers
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ * Author: Michal Nazarewicz <m.nazarewicz@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define pr_fmt(fmt) "g_ffs: " fmt
+
 #include <linux/module.h>
 #include <linux/utsname.h>
 
-
 /*
  * kbuild is not very cooperative with respect to linking separately
  * compiled library objects into one module.  So for now we won't use
@@ -43,7 +65,6 @@ static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
 
 #include "f_fs.c"
 
-
 #define DRIVER_NAME	"g_ffs"
 #define DRIVER_DESC	"USB Function Filesystem"
 #define DRIVER_VERSION	"24 Aug 2004"
@@ -73,8 +94,6 @@ MODULE_PARM_DESC(bDeviceSubClass, "USB Device subclass");
 module_param_named(bDeviceProtocol, gfs_dev_desc.bDeviceProtocol, byte,   0644);
 MODULE_PARM_DESC(bDeviceProtocol, "USB Device protocol");
 
-
-
 static const struct usb_descriptor_header *gfs_otg_desc[] = {
 	(const struct usb_descriptor_header *)
 	&(const struct usb_otg_descriptor) {
@@ -91,8 +110,7 @@ static const struct usb_descriptor_header *gfs_otg_desc[] = {
 	NULL
 };
 
-/* string IDs are assigned dynamically */
-
+/* String IDs are assigned dynamically */
 static struct usb_string gfs_strings[] = {
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
 	{ .s = "FunctionFS + RNDIS" },
@@ -114,8 +132,6 @@ static struct usb_gadget_strings *gfs_dev_strings[] = {
 	NULL,
 };
 
-
-
 struct gfs_configuration {
 	struct usb_configuration c;
 	int (*eth)(struct usb_configuration *c, u8 *ethaddr);
@@ -138,7 +154,6 @@ struct gfs_configuration {
 #endif
 };
 
-
 static int gfs_bind(struct usb_composite_dev *cdev);
 static int gfs_unbind(struct usb_composite_dev *cdev);
 static int gfs_do_config(struct usb_configuration *c);
@@ -151,11 +166,9 @@ static struct usb_composite_driver gfs_driver = {
 	.iProduct	= DRIVER_DESC,
 };
 
-
 static struct ffs_data *gfs_ffs_data;
 static unsigned long gfs_registered;
 
-
 static int  gfs_init(void)
 {
 	ENTER();
@@ -175,7 +188,6 @@ static void  gfs_exit(void)
 }
 module_exit(gfs_exit);
 
-
 static int functionfs_ready_callback(struct ffs_data *ffs)
 {
 	int ret;
@@ -200,14 +212,11 @@ static void functionfs_closed_callback(struct ffs_data *ffs)
 		usb_composite_unregister(&gfs_driver);
 }
 
-
 static int functionfs_check_dev_callback(const char *dev_name)
 {
 	return 0;
 }
 
-
-
 static int gfs_bind(struct usb_composite_dev *cdev)
 {
 	int ret, i;
@@ -274,7 +283,6 @@ static int gfs_unbind(struct usb_composite_dev *cdev)
 	return 0;
 }
 
-
 static int gfs_do_config(struct usb_configuration *c)
 {
 	struct gfs_configuration *gc =
@@ -315,7 +323,6 @@ static int gfs_do_config(struct usb_configuration *c)
 	return 0;
 }
 
-
 #ifdef CONFIG_USB_FUNCTIONFS_ETH
 
 static int eth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN])
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index e511fec9f26..5c2720d64ff 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -96,7 +96,7 @@
 
 /* Mentor high speed "dual role" controller, in peripheral role */
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
-#define gadget_is_musbhdrc(g)	!strcmp("musb_hdrc", (g)->name)
+#define gadget_is_musbhdrc(g)	!strcmp("musb-hdrc", (g)->name)
 #else
 #define gadget_is_musbhdrc(g)	0
 #endif
@@ -120,10 +120,10 @@
 #define gadget_is_fsl_qe(g)	0
 #endif
 
-#ifdef CONFIG_USB_GADGET_CI13XXX
-#define gadget_is_ci13xxx(g)	(!strcmp("ci13xxx_udc", (g)->name))
+#ifdef CONFIG_USB_GADGET_CI13XXX_PCI
+#define gadget_is_ci13xxx_pci(g)	(!strcmp("ci13xxx_pci", (g)->name))
 #else
-#define gadget_is_ci13xxx(g)	0
+#define gadget_is_ci13xxx_pci(g)	0
 #endif
 
 // CONFIG_USB_GADGET_SX2
@@ -142,6 +142,17 @@
 #define gadget_is_s3c_hsotg(g)    0
 #endif
 
+#ifdef CONFIG_USB_GADGET_EG20T
+#define	gadget_is_pch(g)	(!strcmp("pch_udc", (g)->name))
+#else
+#define	gadget_is_pch(g)	0
+#endif
+
+#ifdef CONFIG_USB_GADGET_CI13XXX_MSM
+#define gadget_is_ci13xxx_msm(g)	(!strcmp("ci13xxx_msm", (g)->name))
+#else
+#define gadget_is_ci13xxx_msm(g)	0
+#endif
 
 /**
  * usb_gadget_controller_number - support bcdDevice id convention
@@ -192,7 +203,7 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x21;
 	else if (gadget_is_fsl_qe(gadget))
 		return 0x22;
-	else if (gadget_is_ci13xxx(gadget))
+	else if (gadget_is_ci13xxx_pci(gadget))
 		return 0x23;
 	else if (gadget_is_langwell(gadget))
 		return 0x24;
@@ -200,6 +211,10 @@ static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
 		return 0x25;
 	else if (gadget_is_s3c_hsotg(gadget))
 		return 0x26;
+	else if (gadget_is_pch(gadget))
+		return 0x27;
+	else if (gadget_is_ci13xxx_msm(gadget))
+		return 0x28;
 	return -ENOENT;
 }
 
diff --git a/drivers/usb/gadget/goku_udc.h b/drivers/usb/gadget/goku_udc.h
index 566cb231905..e7e0c69d3b1 100644
--- a/drivers/usb/gadget/goku_udc.h
+++ b/drivers/usb/gadget/goku_udc.h
@@ -251,7 +251,8 @@ struct goku_udc {
 					got_region:1,
 					req_config:1,
 					configured:1,
-					enabled:1;
+					enabled:1,
+					registered:1;
 
 	/* pci state used to access those endpoints */
 	struct pci_dev			*pdev;
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index ed0266462c5..1210534822d 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1191,13 +1191,17 @@ static irqreturn_t imx_udc_ctrl_irq(int irq, void *dev)
 	return IRQ_HANDLED;
 }
 
+#ifndef MX1_INT_USBD0
+#define MX1_INT_USBD0 MX1_USBD_INT0
+#endif
+
 static irqreturn_t imx_udc_bulk_irq(int irq, void *dev)
 {
 	struct imx_udc_struct *imx_usb = dev;
-	struct imx_ep_struct *imx_ep = &imx_usb->imx_ep[irq - USBD_INT0];
+	struct imx_ep_struct *imx_ep = &imx_usb->imx_ep[irq - MX1_INT_USBD0];
 	int intr = __raw_readl(imx_usb->base + USB_EP_INTR(EP_NO(imx_ep)));
 
-	dump_ep_intr(__func__, irq - USBD_INT0, intr, imx_usb->dev);
+	dump_ep_intr(__func__, irq - MX1_INT_USBD0, intr, imx_usb->dev);
 
 	if (!imx_usb->driver) {
 		__raw_writel(intr, imx_usb->base + USB_EP_INTR(EP_NO(imx_ep)));
diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h
index b48ad59603d..7136c242b4e 100644
--- a/drivers/usb/gadget/imx_udc.h
+++ b/drivers/usb/gadget/imx_udc.h
@@ -23,9 +23,6 @@
 /* Helper macros */
 #define EP_NO(ep)	((ep->bEndpointAddress) & ~USB_DIR_IN) /* IN:1, OUT:0 */
 #define EP_DIR(ep)	((ep->bEndpointAddress) & USB_DIR_IN ? 1 : 0)
-#define irq_to_ep(irq)	(((irq) >= USBD_INT0) || ((irq) <= USBD_INT6) \
-		? ((irq) - USBD_INT0) : (USBD_INT6)) /*should not happen*/
-#define ep_to_irq(ep)	(EP_NO((ep)) + USBD_INT0)
 #define IMX_USB_NB_EP	6
 
 /* Driver structures */
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index b8ec954c069..777972454e3 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -2225,6 +2225,7 @@ static void handle_setup_packet(struct langwell_udc *dev,
 	u16	wValue = le16_to_cpu(setup->wValue);
 	u16	wIndex = le16_to_cpu(setup->wIndex);
 	u16	wLength = le16_to_cpu(setup->wLength);
+	u32	portsc1;
 
 	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
@@ -2313,6 +2314,28 @@ static void handle_setup_packet(struct langwell_udc *dev,
 					dev->dev_status &= ~(1 << wValue);
 				}
 				break;
+			case USB_DEVICE_TEST_MODE:
+				dev_dbg(&dev->pdev->dev, "SETUP: TEST MODE\n");
+				if ((wIndex & 0xff) ||
+					(dev->gadget.speed != USB_SPEED_HIGH))
+					ep0_stall(dev);
+
+				switch (wIndex >> 8) {
+				case TEST_J:
+				case TEST_K:
+				case TEST_SE0_NAK:
+				case TEST_PACKET:
+				case TEST_FORCE_EN:
+					if (prime_status_phase(dev, EP_DIR_IN))
+						ep0_stall(dev);
+					portsc1 = readl(&dev->op_regs->portsc1);
+					portsc1 |= (wIndex & 0xf00) << 8;
+					writel(portsc1, &dev->op_regs->portsc1);
+					goto end;
+				default:
+					rc = -EOPNOTSUPP;
+				}
+				break;
 			default:
 				rc = -EOPNOTSUPP;
 				break;
diff --git a/drivers/usb/gadget/mass_storage.c b/drivers/usb/gadget/mass_storage.c
index 0769179dbdb..01822422c3e 100644
--- a/drivers/usb/gadget/mass_storage.c
+++ b/drivers/usb/gadget/mass_storage.c
@@ -102,7 +102,7 @@ static struct fsg_module_parameters mod_data = {
 };
 FSG_MODULE_PARAMETERS(/* no prefix */, mod_data);
 
-static unsigned long msg_registered = 0;
+static unsigned long msg_registered;
 static void msg_cleanup(void);
 
 static int msg_thread_exits(struct fsg_common *common)
diff --git a/drivers/usb/gadget/mv_udc.h b/drivers/usb/gadget/mv_udc.h
new file mode 100644
index 00000000000..65f1f7c3bd4
--- /dev/null
+++ b/drivers/usb/gadget/mv_udc.h
@@ -0,0 +1,294 @@
+
+#ifndef __MV_UDC_H
+#define __MV_UDC_H
+
+#define VUSBHS_MAX_PORTS	8
+
+#define DQH_ALIGNMENT		2048
+#define DTD_ALIGNMENT		64
+#define DMA_BOUNDARY		4096
+
+#define EP_DIR_IN	1
+#define EP_DIR_OUT	0
+
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+
+#define EP0_MAX_PKT_SIZE	64
+/* ep0 transfer state */
+#define WAIT_FOR_SETUP		0
+#define DATA_STATE_XMIT		1
+#define DATA_STATE_NEED_ZLP	2
+#define WAIT_FOR_OUT_STATUS	3
+#define DATA_STATE_RECV		4
+
+#define CAPLENGTH_MASK		(0xff)
+#define DCCPARAMS_DEN_MASK	(0x1f)
+
+#define HCSPARAMS_PPC		(0x10)
+
+/* Frame Index Register Bit Masks */
+#define USB_FRINDEX_MASKS	0x3fff
+
+/* Command Register Bit Masks */
+#define USBCMD_RUN_STOP				(0x00000001)
+#define USBCMD_CTRL_RESET			(0x00000002)
+#define USBCMD_SETUP_TRIPWIRE_SET		(0x00002000)
+#define USBCMD_SETUP_TRIPWIRE_CLEAR		(~USBCMD_SETUP_TRIPWIRE_SET)
+
+#define USBCMD_ATDTW_TRIPWIRE_SET		(0x00004000)
+#define USBCMD_ATDTW_TRIPWIRE_CLEAR		(~USBCMD_ATDTW_TRIPWIRE_SET)
+
+/* bit 15,3,2 are for frame list size */
+#define USBCMD_FRAME_SIZE_1024			(0x00000000) /* 000 */
+#define USBCMD_FRAME_SIZE_512			(0x00000004) /* 001 */
+#define USBCMD_FRAME_SIZE_256			(0x00000008) /* 010 */
+#define USBCMD_FRAME_SIZE_128			(0x0000000C) /* 011 */
+#define USBCMD_FRAME_SIZE_64			(0x00008000) /* 100 */
+#define USBCMD_FRAME_SIZE_32			(0x00008004) /* 101 */
+#define USBCMD_FRAME_SIZE_16			(0x00008008) /* 110 */
+#define USBCMD_FRAME_SIZE_8			(0x0000800C) /* 111 */
+
+#define EPCTRL_TX_ALL_MASK			(0xFFFF0000)
+#define EPCTRL_RX_ALL_MASK			(0x0000FFFF)
+
+#define EPCTRL_TX_DATA_TOGGLE_RST		(0x00400000)
+#define EPCTRL_TX_EP_STALL			(0x00010000)
+#define EPCTRL_RX_EP_STALL			(0x00000001)
+#define EPCTRL_RX_DATA_TOGGLE_RST		(0x00000040)
+#define EPCTRL_RX_ENABLE			(0x00000080)
+#define EPCTRL_TX_ENABLE			(0x00800000)
+#define EPCTRL_CONTROL				(0x00000000)
+#define EPCTRL_ISOCHRONOUS			(0x00040000)
+#define EPCTRL_BULK				(0x00080000)
+#define EPCTRL_INT				(0x000C0000)
+#define EPCTRL_TX_TYPE				(0x000C0000)
+#define EPCTRL_RX_TYPE				(0x0000000C)
+#define EPCTRL_DATA_TOGGLE_INHIBIT		(0x00000020)
+#define EPCTRL_TX_EP_TYPE_SHIFT			(18)
+#define EPCTRL_RX_EP_TYPE_SHIFT			(2)
+
+#define EPCOMPLETE_MAX_ENDPOINTS		(16)
+
+/* endpoint list address bit masks */
+#define USB_EP_LIST_ADDRESS_MASK              0xfffff800
+
+#define PORTSCX_W1C_BITS			0x2a
+#define PORTSCX_PORT_RESET			0x00000100
+#define PORTSCX_PORT_POWER			0x00001000
+#define PORTSCX_FORCE_FULL_SPEED_CONNECT	0x01000000
+#define PORTSCX_PAR_XCVR_SELECT			0xC0000000
+#define PORTSCX_PORT_FORCE_RESUME		0x00000040
+#define PORTSCX_PORT_SUSPEND			0x00000080
+#define PORTSCX_PORT_SPEED_FULL			0x00000000
+#define PORTSCX_PORT_SPEED_LOW			0x04000000
+#define PORTSCX_PORT_SPEED_HIGH			0x08000000
+#define PORTSCX_PORT_SPEED_MASK			0x0C000000
+
+/* USB MODE Register Bit Masks */
+#define USBMODE_CTRL_MODE_IDLE			0x00000000
+#define USBMODE_CTRL_MODE_DEVICE		0x00000002
+#define USBMODE_CTRL_MODE_HOST			0x00000003
+#define USBMODE_CTRL_MODE_RSV			0x00000001
+#define USBMODE_SETUP_LOCK_OFF			0x00000008
+#define USBMODE_STREAM_DISABLE			0x00000010
+
+/* USB STS Register Bit Masks */
+#define USBSTS_INT			0x00000001
+#define USBSTS_ERR			0x00000002
+#define USBSTS_PORT_CHANGE		0x00000004
+#define USBSTS_FRM_LST_ROLL		0x00000008
+#define USBSTS_SYS_ERR			0x00000010
+#define USBSTS_IAA			0x00000020
+#define USBSTS_RESET			0x00000040
+#define USBSTS_SOF			0x00000080
+#define USBSTS_SUSPEND			0x00000100
+#define USBSTS_HC_HALTED		0x00001000
+#define USBSTS_RCL			0x00002000
+#define USBSTS_PERIODIC_SCHEDULE	0x00004000
+#define USBSTS_ASYNC_SCHEDULE		0x00008000
+
+
+/* Interrupt Enable Register Bit Masks */
+#define USBINTR_INT_EN                          (0x00000001)
+#define USBINTR_ERR_INT_EN                      (0x00000002)
+#define USBINTR_PORT_CHANGE_DETECT_EN           (0x00000004)
+
+#define USBINTR_ASYNC_ADV_AAE                   (0x00000020)
+#define USBINTR_ASYNC_ADV_AAE_ENABLE            (0x00000020)
+#define USBINTR_ASYNC_ADV_AAE_DISABLE           (0xFFFFFFDF)
+
+#define USBINTR_RESET_EN                        (0x00000040)
+#define USBINTR_SOF_UFRAME_EN                   (0x00000080)
+#define USBINTR_DEVICE_SUSPEND                  (0x00000100)
+
+#define USB_DEVICE_ADDRESS_MASK			(0xfe000000)
+#define USB_DEVICE_ADDRESS_BIT_SHIFT		(25)
+
+struct mv_cap_regs {
+	u32	caplength_hciversion;
+	u32	hcsparams;	/* HC structural parameters */
+	u32	hccparams;	/* HC Capability Parameters*/
+	u32	reserved[5];
+	u32	dciversion;	/* DC version number and reserved 16 bits */
+	u32	dccparams;	/* DC Capability Parameters */
+};
+
+struct mv_op_regs {
+	u32	usbcmd;		/* Command register */
+	u32	usbsts;		/* Status register */
+	u32	usbintr;	/* Interrupt enable */
+	u32	frindex;	/* Frame index */
+	u32	reserved1[1];
+	u32	deviceaddr;	/* Device Address */
+	u32	eplistaddr;	/* Endpoint List Address */
+	u32	ttctrl;		/* HOST TT status and control */
+	u32	burstsize;	/* Programmable Burst Size */
+	u32	txfilltuning;	/* Host Transmit Pre-Buffer Packet Tuning */
+	u32	reserved[4];
+	u32	epnak;		/* Endpoint NAK */
+	u32	epnaken;	/* Endpoint NAK Enable */
+	u32	configflag;	/* Configured Flag register */
+	u32	portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */
+	u32	otgsc;
+	u32	usbmode;	/* USB Host/Device mode */
+	u32	epsetupstat;	/* Endpoint Setup Status */
+	u32	epprime;	/* Endpoint Initialize */
+	u32	epflush;	/* Endpoint De-initialize */
+	u32	epstatus;	/* Endpoint Status */
+	u32	epcomplete;	/* Endpoint Interrupt On Complete */
+	u32	epctrlx[16];	/* Endpoint Control, where x = 0.. 15 */
+	u32	mcr;		/* Mux Control */
+	u32	isr;		/* Interrupt Status */
+	u32	ier;		/* Interrupt Enable */
+};
+
+struct mv_udc {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	spinlock_t			lock;
+	struct completion		*done;
+	struct platform_device		*dev;
+	int				irq;
+
+	struct mv_cap_regs __iomem	*cap_regs;
+	struct mv_op_regs __iomem	*op_regs;
+	unsigned int			phy_regs;
+	unsigned int			max_eps;
+	struct mv_dqh			*ep_dqh;
+	size_t				ep_dqh_size;
+	dma_addr_t			ep_dqh_dma;
+
+	struct dma_pool			*dtd_pool;
+	struct mv_ep			*eps;
+
+	struct mv_dtd			*dtd_head;
+	struct mv_dtd			*dtd_tail;
+	unsigned int			dtd_entries;
+
+	struct mv_req			*status_req;
+	struct usb_ctrlrequest		local_setup_buff;
+
+	unsigned int		resume_state;	/* USB state to resume */
+	unsigned int		usb_state;	/* USB current state */
+	unsigned int		ep0_state;	/* Endpoint zero state */
+	unsigned int		ep0_dir;
+
+	unsigned int		dev_addr;
+
+	int			errors;
+	unsigned		softconnect:1,
+				vbus_active:1,
+				remote_wakeup:1,
+				softconnected:1,
+				force_fs:1;
+	struct clk		*clk;
+};
+
+/* endpoint data structure */
+struct mv_ep {
+	struct usb_ep		ep;
+	struct mv_udc		*udc;
+	struct list_head	queue;
+	struct mv_dqh		*dqh;
+	const struct usb_endpoint_descriptor	*desc;
+	u32			direction;
+	char			name[14];
+	unsigned		stopped:1,
+				wedge:1,
+				ep_type:2,
+				ep_num:8;
+};
+
+/* request data structure */
+struct mv_req {
+	struct usb_request	req;
+	struct mv_dtd		*dtd, *head, *tail;
+	struct mv_ep		*ep;
+	struct list_head	queue;
+	unsigned		dtd_count;
+	unsigned		mapped:1;
+};
+
+#define EP_QUEUE_HEAD_MULT_POS			30
+#define EP_QUEUE_HEAD_ZLT_SEL			0x20000000
+#define EP_QUEUE_HEAD_MAX_PKT_LEN_POS		16
+#define EP_QUEUE_HEAD_MAX_PKT_LEN(ep_info)	(((ep_info)>>16)&0x07ff)
+#define EP_QUEUE_HEAD_IOS			0x00008000
+#define EP_QUEUE_HEAD_NEXT_TERMINATE		0x00000001
+#define EP_QUEUE_HEAD_IOC			0x00008000
+#define EP_QUEUE_HEAD_MULTO			0x00000C00
+#define EP_QUEUE_HEAD_STATUS_HALT		0x00000040
+#define EP_QUEUE_HEAD_STATUS_ACTIVE		0x00000080
+#define EP_QUEUE_CURRENT_OFFSET_MASK		0x00000FFF
+#define EP_QUEUE_HEAD_NEXT_POINTER_MASK		0xFFFFFFE0
+#define EP_QUEUE_FRINDEX_MASK			0x000007FF
+#define EP_MAX_LENGTH_TRANSFER			0x4000
+
+struct mv_dqh {
+	/* Bits 16..26 Bit 15 is Interrupt On Setup */
+	u32	max_packet_length;
+	u32	curr_dtd_ptr;		/* Current dTD Pointer */
+	u32	next_dtd_ptr;		/* Next dTD Pointer */
+	/* Total bytes (16..30), IOC (15), INT (8), STS (0-7) */
+	u32	size_ioc_int_sts;
+	u32	buff_ptr0;		/* Buffer pointer Page 0 (12-31) */
+	u32	buff_ptr1;		/* Buffer pointer Page 1 (12-31) */
+	u32	buff_ptr2;		/* Buffer pointer Page 2 (12-31) */
+	u32	buff_ptr3;		/* Buffer pointer Page 3 (12-31) */
+	u32	buff_ptr4;		/* Buffer pointer Page 4 (12-31) */
+	u32	reserved1;
+	/* 8 bytes of setup data that follows the Setup PID */
+	u8	setup_buffer[8];
+	u32	reserved2[4];
+};
+
+
+#define DTD_NEXT_TERMINATE		(0x00000001)
+#define DTD_IOC				(0x00008000)
+#define DTD_STATUS_ACTIVE		(0x00000080)
+#define DTD_STATUS_HALTED		(0x00000040)
+#define DTD_STATUS_DATA_BUFF_ERR	(0x00000020)
+#define DTD_STATUS_TRANSACTION_ERR	(0x00000008)
+#define DTD_RESERVED_FIELDS		(0x00007F00)
+#define DTD_ERROR_MASK			(0x68)
+#define DTD_ADDR_MASK			(0xFFFFFFE0)
+#define DTD_PACKET_SIZE			0x7FFF0000
+#define DTD_LENGTH_BIT_POS		(16)
+
+struct mv_dtd {
+	u32	dtd_next;
+	u32	size_ioc_sts;
+	u32	buff_ptr0;		/* Buffer pointer Page 0 */
+	u32	buff_ptr1;		/* Buffer pointer Page 1 */
+	u32	buff_ptr2;		/* Buffer pointer Page 2 */
+	u32	buff_ptr3;		/* Buffer pointer Page 3 */
+	u32	buff_ptr4;		/* Buffer pointer Page 4 */
+	u32	scratch_ptr;
+	/* 32 bytes */
+	dma_addr_t td_dma;		/* dma address for this td */
+	struct mv_dtd *next_dtd_virt;
+};
+
+extern int mv_udc_phy_init(unsigned int base);
+
+#endif
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
new file mode 100644
index 00000000000..d5468a7f38e
--- /dev/null
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -0,0 +1,2149 @@
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+#include "mv_udc.h"
+
+#define DRIVER_DESC		"Marvell PXA USB Device Controller driver"
+#define DRIVER_VERSION		"8 Nov 2010"
+
+#define ep_dir(ep)	(((ep)->ep_num == 0) ? \
+				((ep)->udc->ep0_dir) : ((ep)->direction))
+
+/* timeout value -- usec */
+#define RESET_TIMEOUT		10000
+#define FLUSH_TIMEOUT		10000
+#define EPSTATUS_TIMEOUT	10000
+#define PRIME_TIMEOUT		10000
+#define READSAFE_TIMEOUT	1000
+#define DTD_TIMEOUT		1000
+
+#define LOOPS_USEC_SHIFT	4
+#define LOOPS_USEC		(1 << LOOPS_USEC_SHIFT)
+#define LOOPS(timeout)		((timeout) >> LOOPS_USEC_SHIFT)
+
+static const char driver_name[] = "mv_udc";
+static const char driver_desc[] = DRIVER_DESC;
+
+/* controller device global variable */
+static struct mv_udc	*the_controller;
+int mv_usb_otgsc;
+
+static void nuke(struct mv_ep *ep, int status);
+
+/* for endpoint 0 operations */
+static const struct usb_endpoint_descriptor mv_ep0_desc = {
+	.bLength =		USB_DT_ENDPOINT_SIZE,
+	.bDescriptorType =	USB_DT_ENDPOINT,
+	.bEndpointAddress =	0,
+	.bmAttributes =		USB_ENDPOINT_XFER_CONTROL,
+	.wMaxPacketSize =	EP0_MAX_PKT_SIZE,
+};
+
+static void ep0_reset(struct mv_udc *udc)
+{
+	struct mv_ep *ep;
+	u32 epctrlx;
+	int i = 0;
+
+	/* ep0 in and out */
+	for (i = 0; i < 2; i++) {
+		ep = &udc->eps[i];
+		ep->udc = udc;
+
+		/* ep0 dQH */
+		ep->dqh = &udc->ep_dqh[i];
+
+		/* configure ep0 endpoint capabilities in dQH */
+		ep->dqh->max_packet_length =
+			(EP0_MAX_PKT_SIZE << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
+			| EP_QUEUE_HEAD_IOS;
+
+		epctrlx = readl(&udc->op_regs->epctrlx[0]);
+		if (i) {	/* TX */
+			epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST
+				| (USB_ENDPOINT_XFER_CONTROL
+					<< EPCTRL_TX_EP_TYPE_SHIFT);
+
+		} else {	/* RX */
+			epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST
+				| (USB_ENDPOINT_XFER_CONTROL
+					<< EPCTRL_RX_EP_TYPE_SHIFT);
+		}
+
+		writel(epctrlx, &udc->op_regs->epctrlx[0]);
+	}
+}
+
+/* protocol ep0 stall, will automatically be cleared on new transaction */
+static void ep0_stall(struct mv_udc *udc)
+{
+	u32	epctrlx;
+
+	/* set TX and RX to stall */
+	epctrlx = readl(&udc->op_regs->epctrlx[0]);
+	epctrlx |= EPCTRL_RX_EP_STALL | EPCTRL_TX_EP_STALL;
+	writel(epctrlx, &udc->op_regs->epctrlx[0]);
+
+	/* update ep0 state */
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = EP_DIR_OUT;
+}
+
+static int process_ep_req(struct mv_udc *udc, int index,
+	struct mv_req *curr_req)
+{
+	struct mv_dtd	*curr_dtd;
+	struct mv_dqh	*curr_dqh;
+	int td_complete, actual, remaining_length;
+	int i, direction;
+	int retval = 0;
+	u32 errors;
+
+	curr_dqh = &udc->ep_dqh[index];
+	direction = index % 2;
+
+	curr_dtd = curr_req->head;
+	td_complete = 0;
+	actual = curr_req->req.length;
+
+	for (i = 0; i < curr_req->dtd_count; i++) {
+		if (curr_dtd->size_ioc_sts & DTD_STATUS_ACTIVE) {
+			dev_dbg(&udc->dev->dev, "%s, dTD not completed\n",
+				udc->eps[index].name);
+			return 1;
+		}
+
+		errors = curr_dtd->size_ioc_sts & DTD_ERROR_MASK;
+		if (!errors) {
+			remaining_length +=
+				(curr_dtd->size_ioc_sts	& DTD_PACKET_SIZE)
+					>> DTD_LENGTH_BIT_POS;
+			actual -= remaining_length;
+		} else {
+			dev_info(&udc->dev->dev,
+				"complete_tr error: ep=%d %s: error = 0x%x\n",
+				index >> 1, direction ? "SEND" : "RECV",
+				errors);
+			if (errors & DTD_STATUS_HALTED) {
+				/* Clear the errors and Halt condition */
+				curr_dqh->size_ioc_int_sts &= ~errors;
+				retval = -EPIPE;
+			} else if (errors & DTD_STATUS_DATA_BUFF_ERR) {
+				retval = -EPROTO;
+			} else if (errors & DTD_STATUS_TRANSACTION_ERR) {
+				retval = -EILSEQ;
+			}
+		}
+		if (i != curr_req->dtd_count - 1)
+			curr_dtd = (struct mv_dtd *)curr_dtd->next_dtd_virt;
+	}
+	if (retval)
+		return retval;
+
+	curr_req->req.actual = actual;
+
+	return 0;
+}
+
+/*
+ * done() - retire a request; caller blocked irqs
+ * @status : request status to be set, only works when
+ * request is still in progress.
+ */
+static void done(struct mv_ep *ep, struct mv_req *req, int status)
+{
+	struct mv_udc *udc = NULL;
+	unsigned char stopped = ep->stopped;
+	struct mv_dtd *curr_td, *next_td;
+	int j;
+
+	udc = (struct mv_udc *)ep->udc;
+	/* Removed the req from fsl_ep->queue */
+	list_del_init(&req->queue);
+
+	/* req.status should be set as -EINPROGRESS in ep_queue() */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	/* Free dtd for the request */
+	next_td = req->head;
+	for (j = 0; j < req->dtd_count; j++) {
+		curr_td = next_td;
+		if (j != req->dtd_count - 1)
+			next_td = curr_td->next_dtd_virt;
+		dma_pool_free(udc->dtd_pool, curr_td, curr_td->td_dma);
+	}
+
+	if (req->mapped) {
+		dma_unmap_single(ep->udc->gadget.dev.parent,
+			req->req.dma, req->req.length,
+			((ep_dir(ep) == EP_DIR_IN) ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+		req->req.dma = DMA_ADDR_INVALID;
+		req->mapped = 0;
+	} else
+		dma_sync_single_for_cpu(ep->udc->gadget.dev.parent,
+			req->req.dma, req->req.length,
+			((ep_dir(ep) == EP_DIR_IN) ?
+				DMA_TO_DEVICE : DMA_FROM_DEVICE));
+
+	if (status && (status != -ESHUTDOWN))
+		dev_info(&udc->dev->dev, "complete %s req %p stat %d len %u/%u",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	ep->stopped = 1;
+
+	spin_unlock(&ep->udc->lock);
+	/*
+	 * complete() is from gadget layer,
+	 * eg fsg->bulk_in_complete()
+	 */
+	if (req->req.complete)
+		req->req.complete(&ep->ep, &req->req);
+
+	spin_lock(&ep->udc->lock);
+	ep->stopped = stopped;
+}
+
+static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
+{
+	u32 tmp, epstatus, bit_pos, direction;
+	struct mv_udc *udc;
+	struct mv_dqh *dqh;
+	unsigned int loops;
+	int readsafe, retval = 0;
+
+	udc = ep->udc;
+	direction = ep_dir(ep);
+	dqh = &(udc->ep_dqh[ep->ep_num * 2 + direction]);
+	bit_pos = 1 << (((direction == EP_DIR_OUT) ? 0 : 16) + ep->ep_num);
+
+	/* check if the pipe is empty */
+	if (!(list_empty(&ep->queue))) {
+		struct mv_req *lastreq;
+		lastreq = list_entry(ep->queue.prev, struct mv_req, queue);
+		lastreq->tail->dtd_next =
+			req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+		if (readl(&udc->op_regs->epprime) & bit_pos) {
+			loops = LOOPS(PRIME_TIMEOUT);
+			while (readl(&udc->op_regs->epprime) & bit_pos) {
+				if (loops == 0) {
+					retval = -ETIME;
+					goto done;
+				}
+				udelay(LOOPS_USEC);
+				loops--;
+			}
+			if (readl(&udc->op_regs->epstatus) & bit_pos)
+				goto done;
+		}
+		readsafe = 0;
+		loops = LOOPS(READSAFE_TIMEOUT);
+		while (readsafe == 0) {
+			if (loops == 0) {
+				retval = -ETIME;
+				goto done;
+			}
+			/* start with setting the semaphores */
+			tmp = readl(&udc->op_regs->usbcmd);
+			tmp |= USBCMD_ATDTW_TRIPWIRE_SET;
+			writel(tmp, &udc->op_regs->usbcmd);
+
+			/* read the endpoint status */
+			epstatus = readl(&udc->op_regs->epstatus) & bit_pos;
+
+			/*
+			 * Reread the ATDTW semaphore bit to check if it is
+			 * cleared. When hardware see a hazard, it will clear
+			 * the bit or else we remain set to 1 and we can
+			 * proceed with priming of endpoint if not already
+			 * primed.
+			 */
+			if (readl(&udc->op_regs->usbcmd)
+				& USBCMD_ATDTW_TRIPWIRE_SET) {
+				readsafe = 1;
+			}
+			loops--;
+			udelay(LOOPS_USEC);
+		}
+
+		/* Clear the semaphore */
+		tmp = readl(&udc->op_regs->usbcmd);
+		tmp &= USBCMD_ATDTW_TRIPWIRE_CLEAR;
+		writel(tmp, &udc->op_regs->usbcmd);
+
+		/* If endpoint is not active, we activate it now. */
+		if (!epstatus) {
+			if (direction == EP_DIR_IN) {
+				struct mv_dtd *curr_dtd = dma_to_virt(
+					&udc->dev->dev, dqh->curr_dtd_ptr);
+
+				loops = LOOPS(DTD_TIMEOUT);
+				while (curr_dtd->size_ioc_sts
+					& DTD_STATUS_ACTIVE) {
+					if (loops == 0) {
+						retval = -ETIME;
+						goto done;
+					}
+					loops--;
+					udelay(LOOPS_USEC);
+				}
+			}
+			/* No other transfers on the queue */
+
+			/* Write dQH next pointer and terminate bit to 0 */
+			dqh->next_dtd_ptr = req->head->td_dma
+				& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
+			dqh->size_ioc_int_sts = 0;
+
+			/*
+			 * Ensure that updates to the QH will
+			 * occure before priming.
+			 */
+			wmb();
+
+			/* Prime the Endpoint */
+			writel(bit_pos, &udc->op_regs->epprime);
+		}
+	} else {
+		/* Write dQH next pointer and terminate bit to 0 */
+		dqh->next_dtd_ptr = req->head->td_dma
+			& EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
+		dqh->size_ioc_int_sts = 0;
+
+		/* Ensure that updates to the QH will occure before priming. */
+		wmb();
+
+		/* Prime the Endpoint */
+		writel(bit_pos, &udc->op_regs->epprime);
+
+		if (direction == EP_DIR_IN) {
+			/* FIXME add status check after prime the IN ep */
+			int prime_again;
+			u32 curr_dtd_ptr = dqh->curr_dtd_ptr;
+
+			loops = LOOPS(DTD_TIMEOUT);
+			prime_again = 0;
+			while ((curr_dtd_ptr != req->head->td_dma)) {
+				curr_dtd_ptr = dqh->curr_dtd_ptr;
+				if (loops == 0) {
+					dev_err(&udc->dev->dev,
+						"failed to prime %s\n",
+						ep->name);
+					retval = -ETIME;
+					goto done;
+				}
+				loops--;
+				udelay(LOOPS_USEC);
+
+				if (loops == (LOOPS(DTD_TIMEOUT) >> 2)) {
+					if (prime_again)
+						goto done;
+					dev_info(&udc->dev->dev,
+						"prime again\n");
+					writel(bit_pos,
+						&udc->op_regs->epprime);
+					prime_again = 1;
+				}
+			}
+		}
+	}
+done:
+	return retval;;
+}
+
+static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
+		dma_addr_t *dma, int *is_last)
+{
+	u32 temp;
+	struct mv_dtd *dtd;
+	struct mv_udc *udc;
+
+	/* how big will this transfer be? */
+	*length = min(req->req.length - req->req.actual,
+			(unsigned)EP_MAX_LENGTH_TRANSFER);
+
+	udc = req->ep->udc;
+
+	/*
+	 * Be careful that no _GFP_HIGHMEM is set,
+	 * or we can not use dma_to_virt
+	 */
+	dtd = dma_pool_alloc(udc->dtd_pool, GFP_KERNEL, dma);
+	if (dtd == NULL)
+		return dtd;
+
+	dtd->td_dma = *dma;
+	/* initialize buffer page pointers */
+	temp = (u32)(req->req.dma + req->req.actual);
+	dtd->buff_ptr0 = cpu_to_le32(temp);
+	temp &= ~0xFFF;
+	dtd->buff_ptr1 = cpu_to_le32(temp + 0x1000);
+	dtd->buff_ptr2 = cpu_to_le32(temp + 0x2000);
+	dtd->buff_ptr3 = cpu_to_le32(temp + 0x3000);
+	dtd->buff_ptr4 = cpu_to_le32(temp + 0x4000);
+
+	req->req.actual += *length;
+
+	/* zlp is needed if req->req.zero is set */
+	if (req->req.zero) {
+		if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
+			*is_last = 1;
+		else
+			*is_last = 0;
+	} else if (req->req.length == req->req.actual)
+		*is_last = 1;
+	else
+		*is_last = 0;
+
+	/* Fill in the transfer size; set active bit */
+	temp = ((*length << DTD_LENGTH_BIT_POS) | DTD_STATUS_ACTIVE);
+
+	/* Enable interrupt for the last dtd of a request */
+	if (*is_last && !req->req.no_interrupt)
+		temp |= DTD_IOC;
+
+	dtd->size_ioc_sts = temp;
+
+	mb();
+
+	return dtd;
+}
+
+/* generate dTD linked list for a request */
+static int req_to_dtd(struct mv_req *req)
+{
+	unsigned count;
+	int is_last, is_first = 1;
+	struct mv_dtd *dtd, *last_dtd = NULL;
+	struct mv_udc *udc;
+	dma_addr_t dma;
+
+	udc = req->ep->udc;
+
+	do {
+		dtd = build_dtd(req, &count, &dma, &is_last);
+		if (dtd == NULL)
+			return -ENOMEM;
+
+		if (is_first) {
+			is_first = 0;
+			req->head = dtd;
+		} else {
+			last_dtd->dtd_next = dma;
+			last_dtd->next_dtd_virt = dtd;
+		}
+		last_dtd = dtd;
+		req->dtd_count++;
+	} while (!is_last);
+
+	/* set terminate bit to 1 for the last dTD */
+	dtd->dtd_next = DTD_NEXT_TERMINATE;
+
+	req->tail = dtd;
+
+	return 0;
+}
+
+static int mv_ep_enable(struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct mv_udc *udc;
+	struct mv_ep *ep;
+	struct mv_dqh *dqh;
+	u16 max = 0;
+	u32 bit_pos, epctrlx, direction;
+	unsigned char zlt = 0, ios = 0, mult = 0;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	udc = ep->udc;
+
+	if (!_ep || !desc || ep->desc
+			|| desc->bDescriptorType != USB_DT_ENDPOINT)
+		return -EINVAL;
+
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	direction = ep_dir(ep);
+	max = le16_to_cpu(desc->wMaxPacketSize);
+
+	/*
+	 * disable HW zero length termination select
+	 * driver handles zero length packet through req->req.zero
+	 */
+	zlt = 1;
+
+	/* Get the endpoint queue head address */
+	dqh = (struct mv_dqh *)ep->dqh;
+
+	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
+
+	/* Check if the Endpoint is Primed */
+	if ((readl(&udc->op_regs->epprime) & bit_pos)
+		|| (readl(&udc->op_regs->epstatus) & bit_pos)) {
+		dev_info(&udc->dev->dev,
+			"ep=%d %s: Init ERROR: ENDPTPRIME=0x%x,"
+			" ENDPTSTATUS=0x%x, bit_pos=0x%x\n",
+			(unsigned)ep->ep_num, direction ? "SEND" : "RECV",
+			(unsigned)readl(&udc->op_regs->epprime),
+			(unsigned)readl(&udc->op_regs->epstatus),
+			(unsigned)bit_pos);
+		goto en_done;
+	}
+	/* Set the max packet length, interrupt on Setup and Mult fields */
+	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_BULK:
+		zlt = 1;
+		mult = 0;
+		break;
+	case USB_ENDPOINT_XFER_CONTROL:
+		ios = 1;
+	case USB_ENDPOINT_XFER_INT:
+		mult = 0;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		/* Calculate transactions needed for high bandwidth iso */
+		mult = (unsigned char)(1 + ((max >> 11) & 0x03));
+		max = max & 0x8ff;	/* bit 0~10 */
+		/* 3 transactions at most */
+		if (mult > 3)
+			goto en_done;
+		break;
+	default:
+		goto en_done;
+	}
+	dqh->max_packet_length = (max << EP_QUEUE_HEAD_MAX_PKT_LEN_POS)
+		| (mult << EP_QUEUE_HEAD_MULT_POS)
+		| (zlt ? EP_QUEUE_HEAD_ZLT_SEL : 0)
+		| (ios ? EP_QUEUE_HEAD_IOS : 0);
+	dqh->next_dtd_ptr = 1;
+	dqh->size_ioc_int_sts = 0;
+
+	ep->ep.maxpacket = max;
+	ep->desc = desc;
+	ep->stopped = 0;
+
+	/* Enable the endpoint for Rx or Tx and set the endpoint type */
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if (direction == EP_DIR_IN) {
+		epctrlx &= ~EPCTRL_TX_ALL_MASK;
+		epctrlx |= EPCTRL_TX_ENABLE | EPCTRL_TX_DATA_TOGGLE_RST
+			| ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				<< EPCTRL_TX_EP_TYPE_SHIFT);
+	} else {
+		epctrlx &= ~EPCTRL_RX_ALL_MASK;
+		epctrlx |= EPCTRL_RX_ENABLE | EPCTRL_RX_DATA_TOGGLE_RST
+			| ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				<< EPCTRL_RX_EP_TYPE_SHIFT);
+	}
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+
+	/*
+	 * Implement Guideline (GL# USB-7) The unused endpoint type must
+	 * be programmed to bulk.
+	 */
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if ((epctrlx & EPCTRL_RX_ENABLE) == 0) {
+		epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				<< EPCTRL_RX_EP_TYPE_SHIFT);
+		writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+	}
+
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if ((epctrlx & EPCTRL_TX_ENABLE) == 0) {
+		epctrlx |= ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+				<< EPCTRL_TX_EP_TYPE_SHIFT);
+		writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+	}
+
+	return 0;
+en_done:
+	return -EINVAL;
+}
+
+static int  mv_ep_disable(struct usb_ep *_ep)
+{
+	struct mv_udc *udc;
+	struct mv_ep *ep;
+	struct mv_dqh *dqh;
+	u32 bit_pos, epctrlx, direction;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	if ((_ep == NULL) || !ep->desc)
+		return -EINVAL;
+
+	udc = ep->udc;
+
+	/* Get the endpoint queue head address */
+	dqh = ep->dqh;
+
+	direction = ep_dir(ep);
+	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
+
+	/* Reset the max packet length and the interrupt on Setup */
+	dqh->max_packet_length = 0;
+
+	/* Disable the endpoint for Rx or Tx and reset the endpoint type */
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	epctrlx &= ~((direction == EP_DIR_IN)
+			? (EPCTRL_TX_ENABLE | EPCTRL_TX_TYPE)
+			: (EPCTRL_RX_ENABLE | EPCTRL_RX_TYPE));
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+
+	/* nuke all pending requests (does flush) */
+	nuke(ep, -ESHUTDOWN);
+
+	ep->desc = NULL;
+	ep->stopped = 1;
+	return 0;
+}
+
+static struct usb_request *
+mv_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
+{
+	struct mv_req *req = NULL;
+
+	req = kzalloc(sizeof *req, gfp_flags);
+	if (!req)
+		return NULL;
+
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+
+	return &req->req;
+}
+
+static void mv_free_request(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_req *req = NULL;
+
+	req = container_of(_req, struct mv_req, req);
+
+	if (_req)
+		kfree(req);
+}
+
+static void mv_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct mv_udc *udc;
+	u32 bit_pos, direction;
+	struct mv_ep *ep = container_of(_ep, struct mv_ep, ep);
+	unsigned int loops;
+
+	udc = ep->udc;
+	direction = ep_dir(ep);
+	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
+	/*
+	 * Flushing will halt the pipe
+	 * Write 1 to the Flush register
+	 */
+	writel(bit_pos, &udc->op_regs->epflush);
+
+	/* Wait until flushing completed */
+	loops = LOOPS(FLUSH_TIMEOUT);
+	while (readl(&udc->op_regs->epflush) & bit_pos) {
+		/*
+		 * ENDPTFLUSH bit should be cleared to indicate this
+		 * operation is complete
+		 */
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"TIMEOUT for ENDPTFLUSH=0x%x, bit_pos=0x%x\n",
+				(unsigned)readl(&udc->op_regs->epflush),
+				(unsigned)bit_pos);
+			return;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+	loops = LOOPS(EPSTATUS_TIMEOUT);
+	while (readl(&udc->op_regs->epstatus) & bit_pos) {
+		unsigned int inter_loops;
+
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"TIMEOUT for ENDPTSTATUS=0x%x, bit_pos=0x%x\n",
+				(unsigned)readl(&udc->op_regs->epstatus),
+				(unsigned)bit_pos);
+			return;
+		}
+		/* Write 1 to the Flush register */
+		writel(bit_pos, &udc->op_regs->epflush);
+
+		/* Wait until flushing completed */
+		inter_loops = LOOPS(FLUSH_TIMEOUT);
+		while (readl(&udc->op_regs->epflush) & bit_pos) {
+			/*
+			 * ENDPTFLUSH bit should be cleared to indicate this
+			 * operation is complete
+			 */
+			if (inter_loops == 0) {
+				dev_err(&udc->dev->dev,
+					"TIMEOUT for ENDPTFLUSH=0x%x,"
+					"bit_pos=0x%x\n",
+					(unsigned)readl(&udc->op_regs->epflush),
+					(unsigned)bit_pos);
+				return;
+			}
+			inter_loops--;
+			udelay(LOOPS_USEC);
+		}
+		loops--;
+	}
+}
+
+/* queues (submits) an I/O request to an endpoint */
+static int
+mv_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
+{
+	struct mv_ep *ep = container_of(_ep, struct mv_ep, ep);
+	struct mv_req *req = container_of(_req, struct mv_req, req);
+	struct mv_udc *udc = ep->udc;
+	unsigned long flags;
+
+	/* catch various bogus parameters */
+	if (!_req || !req->req.complete || !req->req.buf
+			|| !list_empty(&req->queue)) {
+		dev_err(&udc->dev->dev, "%s, bad params", __func__);
+		return -EINVAL;
+	}
+	if (unlikely(!_ep || !ep->desc)) {
+		dev_err(&udc->dev->dev, "%s, bad ep", __func__);
+		return -EINVAL;
+	}
+	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		if (req->req.length > ep->ep.maxpacket)
+			return -EMSGSIZE;
+	}
+
+	udc = ep->udc;
+	if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN)
+		return -ESHUTDOWN;
+
+	req->ep = ep;
+
+	/* map virtual address to hardware */
+	if (req->req.dma == DMA_ADDR_INVALID) {
+		req->req.dma = dma_map_single(ep->udc->gadget.dev.parent,
+					req->req.buf,
+					req->req.length, ep_dir(ep)
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+		req->mapped = 1;
+	} else {
+		dma_sync_single_for_device(ep->udc->gadget.dev.parent,
+					req->req.dma, req->req.length,
+					ep_dir(ep)
+						? DMA_TO_DEVICE
+						: DMA_FROM_DEVICE);
+		req->mapped = 0;
+	}
+
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->dtd_count = 0;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* build dtds and push them to device queue */
+	if (!req_to_dtd(req)) {
+		int retval;
+		retval = queue_dtd(ep, req);
+		if (retval) {
+			spin_unlock_irqrestore(&udc->lock, flags);
+			return retval;
+		}
+	} else {
+		spin_unlock_irqrestore(&udc->lock, flags);
+		return -ENOMEM;
+	}
+
+	/* Update ep0 state */
+	if (ep->ep_num == 0)
+		udc->ep0_state = DATA_STATE_XMIT;
+
+	/* irq handler advances the queue */
+	if (req != NULL)
+		list_add_tail(&req->queue, &ep->queue);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	return 0;
+}
+
+/* dequeues (cancels, unlinks) an I/O request from an endpoint */
+static int mv_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct mv_ep *ep = container_of(_ep, struct mv_ep, ep);
+	struct mv_req *req;
+	struct mv_udc *udc = ep->udc;
+	unsigned long flags;
+	int stopped, ret = 0;
+	u32 epctrlx;
+
+	if (!_ep || !_req)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	stopped = ep->stopped;
+
+	/* Stop the ep before we deal with the queue */
+	ep->stopped = 1;
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if (ep_dir(ep) == EP_DIR_IN)
+		epctrlx &= ~EPCTRL_TX_ENABLE;
+	else
+		epctrlx &= ~EPCTRL_RX_ENABLE;
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* The request is in progress, or completed but not dequeued */
+	if (ep->queue.next == &req->queue) {
+		_req->status = -ECONNRESET;
+		mv_ep_fifo_flush(_ep);	/* flush current transfer */
+
+		/* The request isn't the last request in this ep queue */
+		if (req->queue.next != &ep->queue) {
+			struct mv_dqh *qh;
+			struct mv_req *next_req;
+
+			qh = ep->dqh;
+			next_req = list_entry(req->queue.next, struct mv_req,
+					queue);
+
+			/* Point the QH to the first TD of next request */
+			writel((u32) next_req->head, &qh->curr_dtd_ptr);
+		} else {
+			struct mv_dqh *qh;
+
+			qh = ep->dqh;
+			qh->next_dtd_ptr = 1;
+			qh->size_ioc_int_sts = 0;
+		}
+
+		/* The request hasn't been processed, patch up the TD chain */
+	} else {
+		struct mv_req *prev_req;
+
+		prev_req = list_entry(req->queue.prev, struct mv_req, queue);
+		writel(readl(&req->tail->dtd_next),
+				&prev_req->tail->dtd_next);
+
+	}
+
+	done(ep, req, -ECONNRESET);
+
+	/* Enable EP */
+out:
+	epctrlx = readl(&udc->op_regs->epctrlx[ep->ep_num]);
+	if (ep_dir(ep) == EP_DIR_IN)
+		epctrlx |= EPCTRL_TX_ENABLE;
+	else
+		epctrlx |= EPCTRL_RX_ENABLE;
+	writel(epctrlx, &udc->op_regs->epctrlx[ep->ep_num]);
+	ep->stopped = stopped;
+
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+	return ret;
+}
+
+static void ep_set_stall(struct mv_udc *udc, u8 ep_num, u8 direction, int stall)
+{
+	u32 epctrlx;
+
+	epctrlx = readl(&udc->op_regs->epctrlx[ep_num]);
+
+	if (stall) {
+		if (direction == EP_DIR_IN)
+			epctrlx |= EPCTRL_TX_EP_STALL;
+		else
+			epctrlx |= EPCTRL_RX_EP_STALL;
+	} else {
+		if (direction == EP_DIR_IN) {
+			epctrlx &= ~EPCTRL_TX_EP_STALL;
+			epctrlx |= EPCTRL_TX_DATA_TOGGLE_RST;
+		} else {
+			epctrlx &= ~EPCTRL_RX_EP_STALL;
+			epctrlx |= EPCTRL_RX_DATA_TOGGLE_RST;
+		}
+	}
+	writel(epctrlx, &udc->op_regs->epctrlx[ep_num]);
+}
+
+static int ep_is_stall(struct mv_udc *udc, u8 ep_num, u8 direction)
+{
+	u32 epctrlx;
+
+	epctrlx = readl(&udc->op_regs->epctrlx[ep_num]);
+
+	if (direction == EP_DIR_OUT)
+		return (epctrlx & EPCTRL_RX_EP_STALL) ? 1 : 0;
+	else
+		return (epctrlx & EPCTRL_TX_EP_STALL) ? 1 : 0;
+}
+
+static int mv_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
+{
+	struct mv_ep *ep;
+	unsigned long flags = 0;
+	int status = 0;
+	struct mv_udc *udc;
+
+	ep = container_of(_ep, struct mv_ep, ep);
+	udc = ep->udc;
+	if (!_ep || !ep->desc) {
+		status = -EINVAL;
+		goto out;
+	}
+
+	if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
+		status = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/*
+	 * Attempt to halt IN ep will fail if any transfer requests
+	 * are still queue
+	 */
+	if (halt && (ep_dir(ep) == EP_DIR_IN) && !list_empty(&ep->queue)) {
+		status = -EAGAIN;
+		goto out;
+	}
+
+	spin_lock_irqsave(&ep->udc->lock, flags);
+	ep_set_stall(udc, ep->ep_num, ep_dir(ep), halt);
+	if (halt && wedge)
+		ep->wedge = 1;
+	else if (!halt)
+		ep->wedge = 0;
+	spin_unlock_irqrestore(&ep->udc->lock, flags);
+
+	if (ep->ep_num == 0) {
+		udc->ep0_state = WAIT_FOR_SETUP;
+		udc->ep0_dir = EP_DIR_OUT;
+	}
+out:
+	return status;
+}
+
+static int mv_ep_set_halt(struct usb_ep *_ep, int halt)
+{
+	return mv_ep_set_halt_wedge(_ep, halt, 0);
+}
+
+static int mv_ep_set_wedge(struct usb_ep *_ep)
+{
+	return mv_ep_set_halt_wedge(_ep, 1, 1);
+}
+
+static struct usb_ep_ops mv_ep_ops = {
+	.enable		= mv_ep_enable,
+	.disable	= mv_ep_disable,
+
+	.alloc_request	= mv_alloc_request,
+	.free_request	= mv_free_request,
+
+	.queue		= mv_ep_queue,
+	.dequeue	= mv_ep_dequeue,
+
+	.set_wedge	= mv_ep_set_wedge,
+	.set_halt	= mv_ep_set_halt,
+	.fifo_flush	= mv_ep_fifo_flush,	/* flush fifo */
+};
+
+static void udc_stop(struct mv_udc *udc)
+{
+	u32 tmp;
+
+	/* Disable interrupts */
+	tmp = readl(&udc->op_regs->usbintr);
+	tmp &= ~(USBINTR_INT_EN | USBINTR_ERR_INT_EN |
+		USBINTR_PORT_CHANGE_DETECT_EN | USBINTR_RESET_EN);
+	writel(tmp, &udc->op_regs->usbintr);
+
+	/* Reset the Run the bit in the command register to stop VUSB */
+	tmp = readl(&udc->op_regs->usbcmd);
+	tmp &= ~USBCMD_RUN_STOP;
+	writel(tmp, &udc->op_regs->usbcmd);
+}
+
+static void udc_start(struct mv_udc *udc)
+{
+	u32 usbintr;
+
+	usbintr = USBINTR_INT_EN | USBINTR_ERR_INT_EN
+		| USBINTR_PORT_CHANGE_DETECT_EN
+		| USBINTR_RESET_EN | USBINTR_DEVICE_SUSPEND;
+	/* Enable interrupts */
+	writel(usbintr, &udc->op_regs->usbintr);
+
+	/* Set the Run bit in the command register */
+	writel(USBCMD_RUN_STOP, &udc->op_regs->usbcmd);
+}
+
+static int udc_reset(struct mv_udc *udc)
+{
+	unsigned int loops;
+	u32 tmp, portsc;
+
+	/* Stop the controller */
+	tmp = readl(&udc->op_regs->usbcmd);
+	tmp &= ~USBCMD_RUN_STOP;
+	writel(tmp, &udc->op_regs->usbcmd);
+
+	/* Reset the controller to get default values */
+	writel(USBCMD_CTRL_RESET, &udc->op_regs->usbcmd);
+
+	/* wait for reset to complete */
+	loops = LOOPS(RESET_TIMEOUT);
+	while (readl(&udc->op_regs->usbcmd) & USBCMD_CTRL_RESET) {
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"Wait for RESET completed TIMEOUT\n");
+			return -ETIMEDOUT;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+
+	/* set controller to device mode */
+	tmp = readl(&udc->op_regs->usbmode);
+	tmp |= USBMODE_CTRL_MODE_DEVICE;
+
+	/* turn setup lockout off, require setup tripwire in usbcmd */
+	tmp |= USBMODE_SETUP_LOCK_OFF | USBMODE_STREAM_DISABLE;
+
+	writel(tmp, &udc->op_regs->usbmode);
+
+	writel(0x0, &udc->op_regs->epsetupstat);
+
+	/* Configure the Endpoint List Address */
+	writel(udc->ep_dqh_dma & USB_EP_LIST_ADDRESS_MASK,
+		&udc->op_regs->eplistaddr);
+
+	portsc = readl(&udc->op_regs->portsc[0]);
+	if (readl(&udc->cap_regs->hcsparams) & HCSPARAMS_PPC)
+		portsc &= (~PORTSCX_W1C_BITS | ~PORTSCX_PORT_POWER);
+
+	if (udc->force_fs)
+		portsc |= PORTSCX_FORCE_FULL_SPEED_CONNECT;
+	else
+		portsc &= (~PORTSCX_FORCE_FULL_SPEED_CONNECT);
+
+	writel(portsc, &udc->op_regs->portsc[0]);
+
+	tmp = readl(&udc->op_regs->epctrlx[0]);
+	tmp &= ~(EPCTRL_TX_EP_STALL | EPCTRL_RX_EP_STALL);
+	writel(tmp, &udc->op_regs->epctrlx[0]);
+
+	return 0;
+}
+
+static int mv_udc_get_frame(struct usb_gadget *gadget)
+{
+	struct mv_udc *udc;
+	u16	retval;
+
+	if (!gadget)
+		return -ENODEV;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+
+	retval = readl(udc->op_regs->frindex) & USB_FRINDEX_MASKS;
+
+	return retval;
+}
+
+/* Tries to wake up the host connected to this gadget */
+static int mv_udc_wakeup(struct usb_gadget *gadget)
+{
+	struct mv_udc *udc = container_of(gadget, struct mv_udc, gadget);
+	u32 portsc;
+
+	/* Remote wakeup feature not enabled by host */
+	if (!udc->remote_wakeup)
+		return -ENOTSUPP;
+
+	portsc = readl(&udc->op_regs->portsc);
+	/* not suspended? */
+	if (!(portsc & PORTSCX_PORT_SUSPEND))
+		return 0;
+	/* trigger force resume */
+	portsc |= PORTSCX_PORT_FORCE_RESUME;
+	writel(portsc, &udc->op_regs->portsc[0]);
+	return 0;
+}
+
+static int mv_udc_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct mv_udc *udc;
+	unsigned long flags;
+
+	udc = container_of(gadget, struct mv_udc, gadget);
+	spin_lock_irqsave(&udc->lock, flags);
+
+	udc->softconnect = (is_on != 0);
+	if (udc->driver && udc->softconnect)
+		udc_start(udc);
+	else
+		udc_stop(udc);
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+	return 0;
+}
+
+/* device controller usb_gadget_ops structure */
+static const struct usb_gadget_ops mv_ops = {
+
+	/* returns the current frame number */
+	.get_frame	= mv_udc_get_frame,
+
+	/* tries to wake up the host connected to this gadget */
+	.wakeup		= mv_udc_wakeup,
+
+	/* D+ pullup, software-controlled connect/disconnect to USB host */
+	.pullup		= mv_udc_pullup,
+};
+
+static void mv_udc_testmode(struct mv_udc *udc, u16 index, bool enter)
+{
+	dev_info(&udc->dev->dev, "Test Mode is not support yet\n");
+}
+
+static int eps_init(struct mv_udc *udc)
+{
+	struct mv_ep	*ep;
+	char name[14];
+	int i;
+
+	/* initialize ep0 */
+	ep = &udc->eps[0];
+	ep->udc = udc;
+	strncpy(ep->name, "ep0", sizeof(ep->name));
+	ep->ep.name = ep->name;
+	ep->ep.ops = &mv_ep_ops;
+	ep->wedge = 0;
+	ep->stopped = 0;
+	ep->ep.maxpacket = EP0_MAX_PKT_SIZE;
+	ep->ep_num = 0;
+	ep->desc = &mv_ep0_desc;
+	INIT_LIST_HEAD(&ep->queue);
+
+	ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
+
+	/* initialize other endpoints */
+	for (i = 2; i < udc->max_eps * 2; i++) {
+		ep = &udc->eps[i];
+		if (i % 2) {
+			snprintf(name, sizeof(name), "ep%din", i / 2);
+			ep->direction = EP_DIR_IN;
+		} else {
+			snprintf(name, sizeof(name), "ep%dout", i / 2);
+			ep->direction = EP_DIR_OUT;
+		}
+		ep->udc = udc;
+		strncpy(ep->name, name, sizeof(ep->name));
+		ep->ep.name = ep->name;
+
+		ep->ep.ops = &mv_ep_ops;
+		ep->stopped = 0;
+		ep->ep.maxpacket = (unsigned short) ~0;
+		ep->ep_num = i / 2;
+
+		INIT_LIST_HEAD(&ep->queue);
+		list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
+
+		ep->dqh = &udc->ep_dqh[i];
+	}
+
+	return 0;
+}
+
+/* delete all endpoint requests, called with spinlock held */
+static void nuke(struct mv_ep *ep, int status)
+{
+	/* called with spinlock held */
+	ep->stopped = 1;
+
+	/* endpoint fifo flush */
+	mv_ep_fifo_flush(&ep->ep);
+
+	while (!list_empty(&ep->queue)) {
+		struct mv_req *req = NULL;
+		req = list_entry(ep->queue.next, struct mv_req, queue);
+		done(ep, req, status);
+	}
+}
+
+/* stop all USB activities */
+static void stop_activity(struct mv_udc *udc, struct usb_gadget_driver *driver)
+{
+	struct mv_ep	*ep;
+
+	nuke(&udc->eps[0], -ESHUTDOWN);
+
+	list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
+		nuke(ep, -ESHUTDOWN);
+	}
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&udc->lock);
+		driver->disconnect(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
+}
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+		int (*bind)(struct usb_gadget *))
+{
+	struct mv_udc *udc = the_controller;
+	int retval = 0;
+	unsigned long flags;
+
+	if (!udc)
+		return -ENODEV;
+
+	if (udc->driver)
+		return -EBUSY;
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* hook up the driver ... */
+	driver->driver.bus = NULL;
+	udc->driver = driver;
+	udc->gadget.dev.driver = &driver->driver;
+
+	udc->usb_state = USB_STATE_ATTACHED;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->ep0_dir = USB_DIR_OUT;
+
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	retval = bind(&udc->gadget);
+	if (retval) {
+		dev_err(&udc->dev->dev, "bind to driver %s --> %d\n",
+				driver->driver.name, retval);
+		udc->driver = NULL;
+		udc->gadget.dev.driver = NULL;
+		return retval;
+	}
+	udc_reset(udc);
+	ep0_reset(udc);
+	udc_start(udc);
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct mv_udc *udc = the_controller;
+	unsigned long flags;
+
+	if (!udc)
+		return -ENODEV;
+
+	udc_stop(udc);
+
+	spin_lock_irqsave(&udc->lock, flags);
+
+	/* stop all usb activities */
+	udc->gadget.speed = USB_SPEED_UNKNOWN;
+	stop_activity(udc, driver);
+	spin_unlock_irqrestore(&udc->lock, flags);
+
+	/* unbind gadget driver */
+	driver->unbind(&udc->gadget);
+	udc->gadget.dev.driver = NULL;
+	udc->driver = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static int
+udc_prime_status(struct mv_udc *udc, u8 direction, u16 status, bool empty)
+{
+	int retval = 0;
+	struct mv_req *req;
+	struct mv_ep *ep;
+
+	ep = &udc->eps[0];
+	udc->ep0_dir = direction;
+
+	req = udc->status_req;
+
+	/* fill in the reqest structure */
+	if (empty == false) {
+		*((u16 *) req->req.buf) = cpu_to_le16(status);
+		req->req.length = 2;
+	} else
+		req->req.length = 0;
+
+	req->ep = ep;
+	req->req.status = -EINPROGRESS;
+	req->req.actual = 0;
+	req->req.complete = NULL;
+	req->dtd_count = 0;
+
+	/* prime the data phase */
+	if (!req_to_dtd(req))
+		retval = queue_dtd(ep, req);
+	else{	/* no mem */
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	if (retval) {
+		dev_err(&udc->dev->dev, "response error on GET_STATUS request\n");
+		goto out;
+	}
+
+	list_add_tail(&req->queue, &ep->queue);
+
+	return 0;
+out:
+	return retval;
+}
+
+static void ch9setaddress(struct mv_udc *udc, struct usb_ctrlrequest *setup)
+{
+	udc->dev_addr = (u8)setup->wValue;
+
+	/* update usb state */
+	udc->usb_state = USB_STATE_ADDRESS;
+
+	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+		ep0_stall(udc);
+}
+
+static void ch9getstatus(struct mv_udc *udc, u8 ep_num,
+	struct usb_ctrlrequest *setup)
+{
+	u16 status;
+	int retval;
+
+	if ((setup->bRequestType & (USB_DIR_IN | USB_TYPE_MASK))
+		!= (USB_DIR_IN | USB_TYPE_STANDARD))
+		return;
+
+	if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
+		status = 1 << USB_DEVICE_SELF_POWERED;
+		status |= udc->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP;
+	} else if ((setup->bRequestType & USB_RECIP_MASK)
+			== USB_RECIP_INTERFACE) {
+		/* get interface status */
+		status = 0;
+	} else if ((setup->bRequestType & USB_RECIP_MASK)
+			== USB_RECIP_ENDPOINT) {
+		u8 ep_num, direction;
+
+		ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK;
+		direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK)
+				? EP_DIR_IN : EP_DIR_OUT;
+		status = ep_is_stall(udc, ep_num, direction)
+				<< USB_ENDPOINT_HALT;
+	}
+
+	retval = udc_prime_status(udc, EP_DIR_IN, status, false);
+	if (retval)
+		ep0_stall(udc);
+}
+
+static void ch9clearfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
+{
+	u8 ep_num;
+	u8 direction;
+	struct mv_ep *ep;
+
+	if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_DEVICE))) {
+		switch (setup->wValue) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			udc->remote_wakeup = 0;
+			break;
+		case USB_DEVICE_TEST_MODE:
+			mv_udc_testmode(udc, 0, false);
+			break;
+		default:
+			goto out;
+		}
+	} else if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_ENDPOINT))) {
+		switch (setup->wValue) {
+		case USB_ENDPOINT_HALT:
+			ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK;
+			direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK)
+				? EP_DIR_IN : EP_DIR_OUT;
+			if (setup->wValue != 0 || setup->wLength != 0
+				|| ep_num > udc->max_eps)
+				goto out;
+			ep = &udc->eps[ep_num * 2 + direction];
+			if (ep->wedge == 1)
+				break;
+			spin_unlock(&udc->lock);
+			ep_set_stall(udc, ep_num, direction, 0);
+			spin_lock(&udc->lock);
+			break;
+		default:
+			goto out;
+		}
+	} else
+		goto out;
+
+	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+		ep0_stall(udc);
+	else
+		udc->ep0_state = DATA_STATE_XMIT;
+out:
+	return;
+}
+
+static void ch9setfeature(struct mv_udc *udc, struct usb_ctrlrequest *setup)
+{
+	u8 ep_num;
+	u8 direction;
+
+	if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_DEVICE))) {
+		switch (setup->wValue) {
+		case USB_DEVICE_REMOTE_WAKEUP:
+			udc->remote_wakeup = 1;
+			break;
+		case USB_DEVICE_TEST_MODE:
+			if (setup->wIndex & 0xFF
+				&& udc->gadget.speed != USB_SPEED_HIGH)
+				goto out;
+			if (udc->usb_state == USB_STATE_CONFIGURED
+				|| udc->usb_state == USB_STATE_ADDRESS
+				|| udc->usb_state == USB_STATE_DEFAULT)
+				mv_udc_testmode(udc,
+					setup->wIndex & 0xFF00, true);
+			else
+				goto out;
+			break;
+		default:
+			goto out;
+		}
+	} else if ((setup->bRequestType & (USB_TYPE_MASK | USB_RECIP_MASK))
+		== ((USB_TYPE_STANDARD | USB_RECIP_ENDPOINT))) {
+		switch (setup->wValue) {
+		case USB_ENDPOINT_HALT:
+			ep_num = setup->wIndex & USB_ENDPOINT_NUMBER_MASK;
+			direction = (setup->wIndex & USB_ENDPOINT_DIR_MASK)
+				? EP_DIR_IN : EP_DIR_OUT;
+			if (setup->wValue != 0 || setup->wLength != 0
+				|| ep_num > udc->max_eps)
+				goto out;
+			spin_unlock(&udc->lock);
+			ep_set_stall(udc, ep_num, direction, 1);
+			spin_lock(&udc->lock);
+			break;
+		default:
+			goto out;
+		}
+	} else
+		goto out;
+
+	if (udc_prime_status(udc, EP_DIR_IN, 0, true))
+		ep0_stall(udc);
+out:
+	return;
+}
+
+static void handle_setup_packet(struct mv_udc *udc, u8 ep_num,
+	struct usb_ctrlrequest *setup)
+{
+	bool delegate = false;
+
+	nuke(&udc->eps[ep_num * 2 + EP_DIR_OUT], -ESHUTDOWN);
+
+	dev_dbg(&udc->dev->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+			setup->bRequestType, setup->bRequest,
+			setup->wValue, setup->wIndex, setup->wLength);
+	/* We process some stardard setup requests here */
+	if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
+		switch (setup->bRequest) {
+		case USB_REQ_GET_STATUS:
+			ch9getstatus(udc, ep_num, setup);
+			break;
+
+		case USB_REQ_SET_ADDRESS:
+			ch9setaddress(udc, setup);
+			break;
+
+		case USB_REQ_CLEAR_FEATURE:
+			ch9clearfeature(udc, setup);
+			break;
+
+		case USB_REQ_SET_FEATURE:
+			ch9setfeature(udc, setup);
+			break;
+
+		default:
+			delegate = true;
+		}
+	} else
+		delegate = true;
+
+	/* delegate USB standard requests to the gadget driver */
+	if (delegate == true) {
+		/* USB requests handled by gadget */
+		if (setup->wLength) {
+			/* DATA phase from gadget, STATUS phase from udc */
+			udc->ep0_dir = (setup->bRequestType & USB_DIR_IN)
+					?  EP_DIR_IN : EP_DIR_OUT;
+			spin_unlock(&udc->lock);
+			if (udc->driver->setup(&udc->gadget,
+				&udc->local_setup_buff) < 0)
+				ep0_stall(udc);
+			spin_lock(&udc->lock);
+			udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
+					?  DATA_STATE_XMIT : DATA_STATE_RECV;
+		} else {
+			/* no DATA phase, IN STATUS phase from gadget */
+			udc->ep0_dir = EP_DIR_IN;
+			spin_unlock(&udc->lock);
+			if (udc->driver->setup(&udc->gadget,
+				&udc->local_setup_buff) < 0)
+				ep0_stall(udc);
+			spin_lock(&udc->lock);
+			udc->ep0_state = WAIT_FOR_OUT_STATUS;
+		}
+	}
+}
+
+/* complete DATA or STATUS phase of ep0 prime status phase if needed */
+static void ep0_req_complete(struct mv_udc *udc,
+	struct mv_ep *ep0, struct mv_req *req)
+{
+	u32 new_addr;
+
+	if (udc->usb_state == USB_STATE_ADDRESS) {
+		/* set the new address */
+		new_addr = (u32)udc->dev_addr;
+		writel(new_addr << USB_DEVICE_ADDRESS_BIT_SHIFT,
+			&udc->op_regs->deviceaddr);
+	}
+
+	done(ep0, req, 0);
+
+	switch (udc->ep0_state) {
+	case DATA_STATE_XMIT:
+		/* receive status phase */
+		if (udc_prime_status(udc, EP_DIR_OUT, 0, true))
+			ep0_stall(udc);
+		break;
+	case DATA_STATE_RECV:
+		/* send status phase */
+		if (udc_prime_status(udc, EP_DIR_IN, 0 , true))
+			ep0_stall(udc);
+		break;
+	case WAIT_FOR_OUT_STATUS:
+		udc->ep0_state = WAIT_FOR_SETUP;
+		break;
+	case WAIT_FOR_SETUP:
+		dev_err(&udc->dev->dev, "unexpect ep0 packets\n");
+		break;
+	default:
+		ep0_stall(udc);
+		break;
+	}
+}
+
+static void get_setup_data(struct mv_udc *udc, u8 ep_num, u8 *buffer_ptr)
+{
+	u32 temp;
+	struct mv_dqh *dqh;
+
+	dqh = &udc->ep_dqh[ep_num * 2 + EP_DIR_OUT];
+
+	/* Clear bit in ENDPTSETUPSTAT */
+	temp = readl(&udc->op_regs->epsetupstat);
+	writel(temp | (1 << ep_num), &udc->op_regs->epsetupstat);
+
+	/* while a hazard exists when setup package arrives */
+	do {
+		/* Set Setup Tripwire */
+		temp = readl(&udc->op_regs->usbcmd);
+		writel(temp | USBCMD_SETUP_TRIPWIRE_SET, &udc->op_regs->usbcmd);
+
+		/* Copy the setup packet to local buffer */
+		memcpy(buffer_ptr, (u8 *) dqh->setup_buffer, 8);
+	} while (!(readl(&udc->op_regs->usbcmd) & USBCMD_SETUP_TRIPWIRE_SET));
+
+	/* Clear Setup Tripwire */
+	temp = readl(&udc->op_regs->usbcmd);
+	writel(temp & ~USBCMD_SETUP_TRIPWIRE_SET, &udc->op_regs->usbcmd);
+}
+
+static void irq_process_tr_complete(struct mv_udc *udc)
+{
+	u32 tmp, bit_pos;
+	int i, ep_num = 0, direction = 0;
+	struct mv_ep	*curr_ep;
+	struct mv_req *curr_req, *temp_req;
+	int status;
+
+	/*
+	 * We use separate loops for ENDPTSETUPSTAT and ENDPTCOMPLETE
+	 * because the setup packets are to be read ASAP
+	 */
+
+	/* Process all Setup packet received interrupts */
+	tmp = readl(&udc->op_regs->epsetupstat);
+
+	if (tmp) {
+		for (i = 0; i < udc->max_eps; i++) {
+			if (tmp & (1 << i)) {
+				get_setup_data(udc, i,
+					(u8 *)(&udc->local_setup_buff));
+				handle_setup_packet(udc, i,
+					&udc->local_setup_buff);
+			}
+		}
+	}
+
+	/* Don't clear the endpoint setup status register here.
+	 * It is cleared as a setup packet is read out of the buffer
+	 */
+
+	/* Process non-setup transaction complete interrupts */
+	tmp = readl(&udc->op_regs->epcomplete);
+
+	if (!tmp)
+		return;
+
+	writel(tmp, &udc->op_regs->epcomplete);
+
+	for (i = 0; i < udc->max_eps * 2; i++) {
+		ep_num = i >> 1;
+		direction = i % 2;
+
+		bit_pos = 1 << (ep_num + 16 * direction);
+
+		if (!(bit_pos & tmp))
+			continue;
+
+		if (i == 1)
+			curr_ep = &udc->eps[0];
+		else
+			curr_ep = &udc->eps[i];
+		/* process the req queue until an uncomplete request */
+		list_for_each_entry_safe(curr_req, temp_req,
+			&curr_ep->queue, queue) {
+			status = process_ep_req(udc, i, curr_req);
+			if (status)
+				break;
+
+			/* write back status to req */
+			curr_req->req.status = status;
+
+			/* ep0 request completion */
+			if (ep_num == 0) {
+				ep0_req_complete(udc, curr_ep, curr_req);
+				break;
+			} else {
+				done(curr_ep, curr_req, status);
+			}
+		}
+	}
+}
+
+void irq_process_reset(struct mv_udc *udc)
+{
+	u32 tmp;
+	unsigned int loops;
+
+	udc->ep0_dir = EP_DIR_OUT;
+	udc->ep0_state = WAIT_FOR_SETUP;
+	udc->remote_wakeup = 0;		/* default to 0 on reset */
+
+	/* The address bits are past bit 25-31. Set the address */
+	tmp = readl(&udc->op_regs->deviceaddr);
+	tmp &= ~(USB_DEVICE_ADDRESS_MASK);
+	writel(tmp, &udc->op_regs->deviceaddr);
+
+	/* Clear all the setup token semaphores */
+	tmp = readl(&udc->op_regs->epsetupstat);
+	writel(tmp, &udc->op_regs->epsetupstat);
+
+	/* Clear all the endpoint complete status bits */
+	tmp = readl(&udc->op_regs->epcomplete);
+	writel(tmp, &udc->op_regs->epcomplete);
+
+	/* wait until all endptprime bits cleared */
+	loops = LOOPS(PRIME_TIMEOUT);
+	while (readl(&udc->op_regs->epprime) & 0xFFFFFFFF) {
+		if (loops == 0) {
+			dev_err(&udc->dev->dev,
+				"Timeout for ENDPTPRIME = 0x%x\n",
+				readl(&udc->op_regs->epprime));
+			break;
+		}
+		loops--;
+		udelay(LOOPS_USEC);
+	}
+
+	/* Write 1s to the Flush register */
+	writel((u32)~0, &udc->op_regs->epflush);
+
+	if (readl(&udc->op_regs->portsc[0]) & PORTSCX_PORT_RESET) {
+		dev_info(&udc->dev->dev, "usb bus reset\n");
+		udc->usb_state = USB_STATE_DEFAULT;
+		/* reset all the queues, stop all USB activities */
+		stop_activity(udc, udc->driver);
+	} else {
+		dev_info(&udc->dev->dev, "USB reset portsc 0x%x\n",
+			readl(&udc->op_regs->portsc));
+
+		/*
+		 * re-initialize
+		 * controller reset
+		 */
+		udc_reset(udc);
+
+		/* reset all the queues, stop all USB activities */
+		stop_activity(udc, udc->driver);
+
+		/* reset ep0 dQH and endptctrl */
+		ep0_reset(udc);
+
+		/* enable interrupt and set controller to run state */
+		udc_start(udc);
+
+		udc->usb_state = USB_STATE_ATTACHED;
+	}
+}
+
+static void handle_bus_resume(struct mv_udc *udc)
+{
+	udc->usb_state = udc->resume_state;
+	udc->resume_state = 0;
+
+	/* report resume to the driver */
+	if (udc->driver) {
+		if (udc->driver->resume) {
+			spin_unlock(&udc->lock);
+			udc->driver->resume(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+}
+
+static void irq_process_suspend(struct mv_udc *udc)
+{
+	udc->resume_state = udc->usb_state;
+	udc->usb_state = USB_STATE_SUSPENDED;
+
+	if (udc->driver->suspend) {
+		spin_unlock(&udc->lock);
+		udc->driver->suspend(&udc->gadget);
+		spin_lock(&udc->lock);
+	}
+}
+
+static void irq_process_port_change(struct mv_udc *udc)
+{
+	u32 portsc;
+
+	portsc = readl(&udc->op_regs->portsc[0]);
+	if (!(portsc & PORTSCX_PORT_RESET)) {
+		/* Get the speed */
+		u32 speed = portsc & PORTSCX_PORT_SPEED_MASK;
+		switch (speed) {
+		case PORTSCX_PORT_SPEED_HIGH:
+			udc->gadget.speed = USB_SPEED_HIGH;
+			break;
+		case PORTSCX_PORT_SPEED_FULL:
+			udc->gadget.speed = USB_SPEED_FULL;
+			break;
+		case PORTSCX_PORT_SPEED_LOW:
+			udc->gadget.speed = USB_SPEED_LOW;
+			break;
+		default:
+			udc->gadget.speed = USB_SPEED_UNKNOWN;
+			break;
+		}
+	}
+
+	if (portsc & PORTSCX_PORT_SUSPEND) {
+		udc->resume_state = udc->usb_state;
+		udc->usb_state = USB_STATE_SUSPENDED;
+		if (udc->driver->suspend) {
+			spin_unlock(&udc->lock);
+			udc->driver->suspend(&udc->gadget);
+			spin_lock(&udc->lock);
+		}
+	}
+
+	if (!(portsc & PORTSCX_PORT_SUSPEND)
+		&& udc->usb_state == USB_STATE_SUSPENDED) {
+		handle_bus_resume(udc);
+	}
+
+	if (!udc->resume_state)
+		udc->usb_state = USB_STATE_DEFAULT;
+}
+
+static void irq_process_error(struct mv_udc *udc)
+{
+	/* Increment the error count */
+	udc->errors++;
+}
+
+static irqreturn_t mv_udc_irq(int irq, void *dev)
+{
+	struct mv_udc *udc = (struct mv_udc *)dev;
+	u32 status, intr;
+
+	spin_lock(&udc->lock);
+
+	status = readl(&udc->op_regs->usbsts);
+	intr = readl(&udc->op_regs->usbintr);
+	status &= intr;
+
+	if (status == 0) {
+		spin_unlock(&udc->lock);
+		return IRQ_NONE;
+	}
+
+	/* Clear all the interrupts occured */
+	writel(status, &udc->op_regs->usbsts);
+
+	if (status & USBSTS_ERR)
+		irq_process_error(udc);
+
+	if (status & USBSTS_RESET)
+		irq_process_reset(udc);
+
+	if (status & USBSTS_PORT_CHANGE)
+		irq_process_port_change(udc);
+
+	if (status & USBSTS_INT)
+		irq_process_tr_complete(udc);
+
+	if (status & USBSTS_SUSPEND)
+		irq_process_suspend(udc);
+
+	spin_unlock(&udc->lock);
+
+	return IRQ_HANDLED;
+}
+
+/* release device structure */
+static void gadget_release(struct device *_dev)
+{
+	struct mv_udc *udc = the_controller;
+
+	complete(udc->done);
+	kfree(udc);
+}
+
+static int mv_udc_remove(struct platform_device *dev)
+{
+	struct mv_udc *udc = the_controller;
+
+	DECLARE_COMPLETION(done);
+
+	udc->done = &done;
+
+	/* free memory allocated in probe */
+	if (udc->dtd_pool)
+		dma_pool_destroy(udc->dtd_pool);
+
+	if (udc->ep_dqh)
+		dma_free_coherent(&dev->dev, udc->ep_dqh_size,
+			udc->ep_dqh, udc->ep_dqh_dma);
+
+	kfree(udc->eps);
+
+	if (udc->irq)
+		free_irq(udc->irq, &dev->dev);
+
+	if (udc->cap_regs)
+		iounmap(udc->cap_regs);
+	udc->cap_regs = NULL;
+
+	if (udc->phy_regs)
+		iounmap((void *)udc->phy_regs);
+	udc->phy_regs = 0;
+
+	if (udc->status_req) {
+		kfree(udc->status_req->req.buf);
+		kfree(udc->status_req);
+	}
+
+	device_unregister(&udc->gadget.dev);
+
+	/* free dev, wait for the release() finished */
+	wait_for_completion(&done);
+
+	the_controller = NULL;
+
+	return 0;
+}
+
+int mv_udc_probe(struct platform_device *dev)
+{
+	struct mv_udc *udc;
+	int retval = 0;
+	struct resource *r;
+	size_t size;
+
+	udc = kzalloc(sizeof *udc, GFP_KERNEL);
+	if (udc == NULL) {
+		dev_err(&dev->dev, "failed to allocate memory for udc\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	spin_lock_init(&udc->lock);
+
+	udc->dev = dev;
+
+	udc->clk = clk_get(&dev->dev, "U2OCLK");
+	if (IS_ERR(udc->clk)) {
+		retval = PTR_ERR(udc->clk);
+		goto error;
+	}
+
+	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2o");
+	if (r == NULL) {
+		dev_err(&dev->dev, "no I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
+	udc->cap_regs = (struct mv_cap_regs __iomem *)
+		ioremap(r->start, resource_size(r));
+	if (udc->cap_regs == NULL) {
+		dev_err(&dev->dev, "failed to map I/O memory\n");
+		retval = -EBUSY;
+		goto error;
+	}
+
+	r = platform_get_resource_byname(udc->dev, IORESOURCE_MEM, "u2ophy");
+	if (r == NULL) {
+		dev_err(&dev->dev, "no phy I/O memory resource defined\n");
+		retval = -ENODEV;
+		goto error;
+	}
+
+	udc->phy_regs = (unsigned int)ioremap(r->start, resource_size(r));
+	if (udc->phy_regs == 0) {
+		dev_err(&dev->dev, "failed to map phy I/O memory\n");
+		retval = -EBUSY;
+		goto error;
+	}
+
+	/* we will acces controller register, so enable the clk */
+	clk_enable(udc->clk);
+	retval = mv_udc_phy_init(udc->phy_regs);
+	if (retval) {
+		dev_err(&dev->dev, "phy initialization error %d\n", retval);
+		goto error;
+	}
+
+	udc->op_regs = (struct mv_op_regs __iomem *)((u32)udc->cap_regs
+		+ (readl(&udc->cap_regs->caplength_hciversion)
+			& CAPLENGTH_MASK));
+	udc->max_eps = readl(&udc->cap_regs->dccparams) & DCCPARAMS_DEN_MASK;
+
+	size = udc->max_eps * sizeof(struct mv_dqh) *2;
+	size = (size + DQH_ALIGNMENT - 1) & ~(DQH_ALIGNMENT - 1);
+	udc->ep_dqh = dma_alloc_coherent(&dev->dev, size,
+					&udc->ep_dqh_dma, GFP_KERNEL);
+
+	if (udc->ep_dqh == NULL) {
+		dev_err(&dev->dev, "allocate dQH memory failed\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+	udc->ep_dqh_size = size;
+
+	/* create dTD dma_pool resource */
+	udc->dtd_pool = dma_pool_create("mv_dtd",
+			&dev->dev,
+			sizeof(struct mv_dtd),
+			DTD_ALIGNMENT,
+			DMA_BOUNDARY);
+
+	if (!udc->dtd_pool) {
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	size = udc->max_eps * sizeof(struct mv_ep) *2;
+	udc->eps = kzalloc(size, GFP_KERNEL);
+	if (udc->eps == NULL) {
+		dev_err(&dev->dev, "allocate ep memory failed\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+
+	/* initialize ep0 status request structure */
+	udc->status_req = kzalloc(sizeof(struct mv_req), GFP_KERNEL);
+	if (!udc->status_req) {
+		dev_err(&dev->dev, "allocate status_req memory failed\n");
+		retval = -ENOMEM;
+		goto error;
+	}
+	INIT_LIST_HEAD(&udc->status_req->queue);
+
+	/* allocate a small amount of memory to get valid address */
+	udc->status_req->req.buf = kzalloc(8, GFP_KERNEL);
+	udc->status_req->req.dma = virt_to_phys(udc->status_req->req.buf);
+
+	udc->resume_state = USB_STATE_NOTATTACHED;
+	udc->usb_state = USB_STATE_POWERED;
+	udc->ep0_dir = EP_DIR_OUT;
+	udc->remote_wakeup = 0;
+
+	r = platform_get_resource(udc->dev, IORESOURCE_IRQ, 0);
+	if (r == NULL) {
+		dev_err(&dev->dev, "no IRQ resource defined\n");
+		retval = -ENODEV;
+		goto error;
+	}
+	udc->irq = r->start;
+	if (request_irq(udc->irq, mv_udc_irq,
+		IRQF_DISABLED | IRQF_SHARED, driver_name, udc)) {
+		dev_err(&dev->dev, "Request irq %d for UDC failed\n",
+			udc->irq);
+		retval = -ENODEV;
+		goto error;
+	}
+
+	/* initialize gadget structure */
+	udc->gadget.ops = &mv_ops;	/* usb_gadget_ops */
+	udc->gadget.ep0 = &udc->eps[0].ep;	/* gadget ep0 */
+	INIT_LIST_HEAD(&udc->gadget.ep_list);	/* ep_list */
+	udc->gadget.speed = USB_SPEED_UNKNOWN;	/* speed */
+	udc->gadget.is_dualspeed = 1;		/* support dual speed */
+
+	/* the "gadget" abstracts/virtualizes the controller */
+	dev_set_name(&udc->gadget.dev, "gadget");
+	udc->gadget.dev.parent = &dev->dev;
+	udc->gadget.dev.dma_mask = dev->dev.dma_mask;
+	udc->gadget.dev.release = gadget_release;
+	udc->gadget.name = driver_name;		/* gadget name */
+
+	retval = device_register(&udc->gadget.dev);
+	if (retval)
+		goto error;
+
+	eps_init(udc);
+
+	the_controller = udc;
+
+	goto out;
+error:
+	if (udc)
+		mv_udc_remove(udc->dev);
+out:
+	return retval;
+}
+
+#ifdef CONFIG_PM
+static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state)
+{
+	struct mv_udc *udc = the_controller;
+
+	udc_stop(udc);
+
+	return 0;
+}
+
+static int mv_udc_resume(struct platform_device *_dev)
+{
+	struct mv_udc *udc = the_controller;
+	int retval;
+
+	retval = mv_udc_phy_init(udc->phy_regs);
+	if (retval) {
+		dev_err(_dev, "phy initialization error %d\n", retval);
+		goto error;
+	}
+	udc_reset(udc);
+	ep0_reset(udc);
+	udc_start(udc);
+
+	return 0;
+}
+
+static const struct dev_pm_ops mv_udc_pm_ops = {
+	.suspend	= mv_udc_suspend,
+	.resume		= mv_udc_resume,
+};
+#endif
+
+static struct platform_driver udc_driver = {
+	.probe		= mv_udc_probe,
+	.remove		= __exit_p(mv_udc_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "pxa-u2o",
+#ifdef CONFIG_PM
+		.pm	= mv_udc_pm_ops,
+#endif
+	},
+};
+
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+
+static int __init init(void)
+{
+	return platform_driver_register(&udc_driver);
+}
+module_init(init);
+
+
+static void __exit cleanup(void)
+{
+	platform_driver_unregister(&udc_driver);
+}
+module_exit(cleanup);
+
diff --git a/drivers/usb/gadget/mv_udc_phy.c b/drivers/usb/gadget/mv_udc_phy.c
new file mode 100644
index 00000000000..d4dea97e38a
--- /dev/null
+++ b/drivers/usb/gadget/mv_udc_phy.c
@@ -0,0 +1,214 @@
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+
+#include <mach/cputype.h>
+
+#ifdef CONFIG_ARCH_MMP
+
+#define UTMI_REVISION		0x0
+#define UTMI_CTRL		0x4
+#define UTMI_PLL		0x8
+#define UTMI_TX			0xc
+#define UTMI_RX			0x10
+#define UTMI_IVREF		0x14
+#define UTMI_T0			0x18
+#define UTMI_T1			0x1c
+#define UTMI_T2			0x20
+#define UTMI_T3			0x24
+#define UTMI_T4			0x28
+#define UTMI_T5			0x2c
+#define UTMI_RESERVE		0x30
+#define UTMI_USB_INT		0x34
+#define UTMI_DBG_CTL		0x38
+#define UTMI_OTG_ADDON		0x3c
+
+/* For UTMICTRL Register */
+#define UTMI_CTRL_USB_CLK_EN			(1 << 31)
+/* pxa168 */
+#define UTMI_CTRL_SUSPEND_SET1			(1 << 30)
+#define UTMI_CTRL_SUSPEND_SET2			(1 << 29)
+#define UTMI_CTRL_RXBUF_PDWN			(1 << 24)
+#define UTMI_CTRL_TXBUF_PDWN			(1 << 11)
+
+#define UTMI_CTRL_INPKT_DELAY_SHIFT		30
+#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
+#define UTMI_CTRL_PU_REF_SHIFT			20
+#define UTMI_CTRL_ARC_PULLDN_SHIFT		12
+#define UTMI_CTRL_PLL_PWR_UP_SHIFT		1
+#define UTMI_CTRL_PWR_UP_SHIFT			0
+/* For UTMI_PLL Register */
+#define UTMI_PLL_CLK_BLK_EN_SHIFT		24
+#define UTMI_PLL_FBDIV_SHIFT			4
+#define UTMI_PLL_REFDIV_SHIFT			0
+#define UTMI_PLL_FBDIV_MASK			0x00000FF0
+#define UTMI_PLL_REFDIV_MASK			0x0000000F
+#define UTMI_PLL_ICP_MASK			0x00007000
+#define UTMI_PLL_KVCO_MASK			0x00031000
+#define UTMI_PLL_PLLCALI12_SHIFT		29
+#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)
+#define UTMI_PLL_PLLVDD18_SHIFT			27
+#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)
+#define UTMI_PLL_PLLVDD12_SHIFT			25
+#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)
+#define UTMI_PLL_KVCO_SHIFT			15
+#define UTMI_PLL_ICP_SHIFT			12
+/* For UTMI_TX Register */
+#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
+#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)
+#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		26
+#define UTMI_TX_REG_EXT_FS_RCAL_EN		(0x1 << 26)
+#define UTMI_TX_LOW_VDD_EN_SHIFT		11
+#define UTMI_TX_IMPCAL_VTH_SHIFT		14
+#define UTMI_TX_IMPCAL_VTH_MASK			(0x7 << 14)
+#define UTMI_TX_CK60_PHSEL_SHIFT		17
+#define UTMI_TX_CK60_PHSEL_MASK			(0xf << 17)
+#define UTMI_TX_TXVDD12_SHIFT                   22
+#define UTMI_TX_TXVDD12_MASK			(0x3 << 22)
+#define UTMI_TX_AMP_SHIFT			0
+#define UTMI_TX_AMP_MASK			(0x7 << 0)
+/* For UTMI_RX Register */
+#define UTMI_RX_SQ_THRESH_SHIFT			4
+#define UTMI_RX_SQ_THRESH_MASK			(0xf << 4)
+#define UTMI_REG_SQ_LENGTH_SHIFT		15
+#define UTMI_REG_SQ_LENGTH_MASK			(0x3 << 15)
+
+#define REG_RCAL_START				0x00001000
+#define VCOCAL_START				0x00200000
+#define KVCO_EXT				0x00400000
+#define PLL_READY				0x00800000
+#define CLK_BLK_EN				0x01000000
+#endif
+
+static unsigned int u2o_read(unsigned int base, unsigned int offset)
+{
+	return readl(base + offset);
+}
+
+static void u2o_set(unsigned int base, unsigned int offset, unsigned int value)
+{
+	unsigned int reg;
+
+	reg = readl(base + offset);
+	reg |= value;
+	writel(reg, base + offset);
+	readl(base + offset);
+}
+
+static void u2o_clear(unsigned int base, unsigned int offset,
+	unsigned int value)
+{
+	unsigned int reg;
+
+	reg = readl(base + offset);
+	reg &= ~value;
+	writel(reg, base + offset);
+	readl(base + offset);
+}
+
+static void u2o_write(unsigned int base, unsigned int offset,
+	unsigned int value)
+{
+	writel(value, base + offset);
+	readl(base + offset);
+}
+
+#ifdef CONFIG_ARCH_MMP
+int mv_udc_phy_init(unsigned int base)
+{
+	unsigned long timeout;
+
+	/* Initialize the USB PHY power */
+	if (cpu_is_pxa910()) {
+		u2o_set(base, UTMI_CTRL, (1 << UTMI_CTRL_INPKT_DELAY_SOF_SHIFT)
+			| (1 << UTMI_CTRL_PU_REF_SHIFT));
+	}
+
+	u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PLL_PWR_UP_SHIFT);
+	u2o_set(base, UTMI_CTRL, 1 << UTMI_CTRL_PWR_UP_SHIFT);
+
+	/* UTMI_PLL settings */
+	u2o_clear(base, UTMI_PLL, UTMI_PLL_PLLVDD18_MASK
+		| UTMI_PLL_PLLVDD12_MASK | UTMI_PLL_PLLCALI12_MASK
+		| UTMI_PLL_FBDIV_MASK | UTMI_PLL_REFDIV_MASK
+		| UTMI_PLL_ICP_MASK | UTMI_PLL_KVCO_MASK);
+
+	u2o_set(base, UTMI_PLL, (0xee << UTMI_PLL_FBDIV_SHIFT)
+		| (0xb << UTMI_PLL_REFDIV_SHIFT)
+		| (3 << UTMI_PLL_PLLVDD18_SHIFT)
+		| (3 << UTMI_PLL_PLLVDD12_SHIFT)
+		| (3 << UTMI_PLL_PLLCALI12_SHIFT)
+		| (1 << UTMI_PLL_ICP_SHIFT) | (3 << UTMI_PLL_KVCO_SHIFT));
+
+	/* UTMI_TX */
+	u2o_clear(base, UTMI_TX, UTMI_TX_REG_EXT_FS_RCAL_EN_MASK
+		| UTMI_TX_TXVDD12_MASK
+		| UTMI_TX_CK60_PHSEL_MASK | UTMI_TX_IMPCAL_VTH_MASK
+		| UTMI_TX_REG_EXT_FS_RCAL_MASK | UTMI_TX_AMP_MASK);
+	u2o_set(base, UTMI_TX, (3 << UTMI_TX_TXVDD12_SHIFT)
+		| (4 << UTMI_TX_CK60_PHSEL_SHIFT)
+		| (4 << UTMI_TX_IMPCAL_VTH_SHIFT)
+		| (8 << UTMI_TX_REG_EXT_FS_RCAL_SHIFT)
+		| (3 << UTMI_TX_AMP_SHIFT));
+
+	/* UTMI_RX */
+	u2o_clear(base, UTMI_RX, UTMI_RX_SQ_THRESH_MASK
+		| UTMI_REG_SQ_LENGTH_MASK);
+	if (cpu_is_pxa168())
+		u2o_set(base, UTMI_RX, (7 << UTMI_RX_SQ_THRESH_SHIFT)
+			| (2 << UTMI_REG_SQ_LENGTH_SHIFT));
+	else
+		u2o_set(base, UTMI_RX, (0x7 << UTMI_RX_SQ_THRESH_SHIFT)
+			| (2 << UTMI_REG_SQ_LENGTH_SHIFT));
+
+	/* UTMI_IVREF */
+	if (cpu_is_pxa168())
+		/*
+		 * fixing Microsoft Altair board interface with NEC hub issue -
+		 * Set UTMI_IVREF from 0x4a3 to 0x4bf
+		 */
+		u2o_write(base, UTMI_IVREF, 0x4bf);
+
+	/* calibrate */
+	timeout = jiffies + 100;
+	while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) {
+		if (time_after(jiffies, timeout))
+			return -ETIME;
+		cpu_relax();
+	}
+
+	/* toggle VCOCAL_START bit of UTMI_PLL */
+	udelay(200);
+	u2o_set(base, UTMI_PLL, VCOCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_PLL, VCOCAL_START);
+
+	/* toggle REG_RCAL_START bit of UTMI_TX */
+	udelay(200);
+	u2o_set(base, UTMI_TX, REG_RCAL_START);
+	udelay(40);
+	u2o_clear(base, UTMI_TX, REG_RCAL_START);
+	udelay(200);
+
+	/* make sure phy is ready */
+	timeout = jiffies + 100;
+	while ((u2o_read(base, UTMI_PLL) & PLL_READY) == 0) {
+		if (time_after(jiffies, timeout))
+			return -ETIME;
+		cpu_relax();
+	}
+
+	if (cpu_is_pxa168()) {
+		u2o_set(base, UTMI_RESERVE, 1 << 5);
+		/* Turn on UTMI PHY OTG extension */
+		u2o_write(base, UTMI_OTG_ADDON, 1);
+	}
+	return 0;
+}
+#else
+int mv_udc_phy_init(unsigned int base)
+{
+	return 0;
+}
+#endif
diff --git a/drivers/usb/gadget/ncm.c b/drivers/usb/gadget/ncm.c
new file mode 100644
index 00000000000..99c179ad729
--- /dev/null
+++ b/drivers/usb/gadget/ncm.c
@@ -0,0 +1,248 @@
+/*
+ * ncm.c -- NCM gadget driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Contact: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
+ *
+ * The driver borrows from ether.c which is:
+ *
+ * Copyright (C) 2003-2005,2008 David Brownell
+ * Copyright (C) 2003-2004 Robert Schwebel, Benedikt Spranger
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* #define DEBUG */
+/* #define VERBOSE_DEBUG */
+
+#include <linux/kernel.h>
+#include <linux/utsname.h>
+
+
+#include "u_ether.h"
+
+#define DRIVER_DESC		"NCM Gadget"
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Kbuild is not very cooperative with respect to linking separately
+ * compiled library objects into one module.  So for now we won't use
+ * separate compilation ... ensuring init/exit sections work to shrink
+ * the runtime footprint, and giving us at least some parts of what
+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
+ */
+#include "composite.c"
+#include "usbstring.c"
+#include "config.c"
+#include "epautoconf.c"
+
+#include "f_ncm.c"
+#include "u_ether.c"
+
+/*-------------------------------------------------------------------------*/
+
+/* DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
+ * Instead:  allocate your own, using normal USB-IF procedures.
+ */
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ * It's for devices with only CDC Ethernet configurations.
+ */
+#define CDC_VENDOR_NUM		0x0525	/* NetChip */
+#define CDC_PRODUCT_NUM		0xa4a1	/* Linux-USB Ethernet Gadget */
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_device_descriptor device_desc = {
+	.bLength =		sizeof device_desc,
+	.bDescriptorType =	USB_DT_DEVICE,
+
+	.bcdUSB =		cpu_to_le16 (0x0200),
+
+	.bDeviceClass =		USB_CLASS_COMM,
+	.bDeviceSubClass =	0,
+	.bDeviceProtocol =	0,
+	/* .bMaxPacketSize0 = f(hardware) */
+
+	/* Vendor and product id defaults change according to what configs
+	 * we support.  (As does bNumConfigurations.)  These values can
+	 * also be overridden by module parameters.
+	 */
+	.idVendor =		cpu_to_le16 (CDC_VENDOR_NUM),
+	.idProduct =		cpu_to_le16 (CDC_PRODUCT_NUM),
+	/* .bcdDevice = f(hardware) */
+	/* .iManufacturer = DYNAMIC */
+	/* .iProduct = DYNAMIC */
+	/* NO SERIAL NUMBER */
+	.bNumConfigurations =	1,
+};
+
+static struct usb_otg_descriptor otg_descriptor = {
+	.bLength =		sizeof otg_descriptor,
+	.bDescriptorType =	USB_DT_OTG,
+
+	/* REVISIT SRP-only hardware is possible, although
+	 * it would not be called "OTG" ...
+	 */
+	.bmAttributes =		USB_OTG_SRP | USB_OTG_HNP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+	(struct usb_descriptor_header *) &otg_descriptor,
+	NULL,
+};
+
+
+/* string IDs are assigned dynamically */
+
+#define STRING_MANUFACTURER_IDX		0
+#define STRING_PRODUCT_IDX		1
+
+static char manufacturer[50];
+
+static struct usb_string strings_dev[] = {
+	[STRING_MANUFACTURER_IDX].s = manufacturer,
+	[STRING_PRODUCT_IDX].s = DRIVER_DESC,
+	{  } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab_dev = {
+	.language	= 0x0409,	/* en-us */
+	.strings	= strings_dev,
+};
+
+static struct usb_gadget_strings *dev_strings[] = {
+	&stringtab_dev,
+	NULL,
+};
+
+static u8 hostaddr[ETH_ALEN];
+
+/*-------------------------------------------------------------------------*/
+
+static int __init ncm_do_config(struct usb_configuration *c)
+{
+	/* FIXME alloc iConfiguration string, set it in c->strings */
+
+	if (gadget_is_otg(c->cdev->gadget)) {
+		c->descriptors = otg_desc;
+		c->bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+	}
+
+	return ncm_bind_config(c, hostaddr);
+}
+
+static struct usb_configuration ncm_config_driver = {
+	/* .label = f(hardware) */
+	.label			= "CDC Ethernet (NCM)",
+	.bConfigurationValue	= 1,
+	/* .iConfiguration = DYNAMIC */
+	.bmAttributes		= USB_CONFIG_ATT_SELFPOWER,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init gncm_bind(struct usb_composite_dev *cdev)
+{
+	int			gcnum;
+	struct usb_gadget	*gadget = cdev->gadget;
+	int			status;
+
+	/* set up network link layer */
+	status = gether_setup(cdev->gadget, hostaddr);
+	if (status < 0)
+		return status;
+
+	gcnum = usb_gadget_controller_number(gadget);
+	if (gcnum >= 0)
+		device_desc.bcdDevice = cpu_to_le16(0x0300 | gcnum);
+	else {
+		/* We assume that can_support_ecm() tells the truth;
+		 * but if the controller isn't recognized at all then
+		 * that assumption is a bit more likely to be wrong.
+		 */
+		dev_warn(&gadget->dev,
+			 "controller '%s' not recognized; trying %s\n",
+			 gadget->name,
+			 ncm_config_driver.label);
+		device_desc.bcdDevice =
+			cpu_to_le16(0x0300 | 0x0099);
+	}
+
+
+	/* Allocate string descriptor numbers ... note that string
+	 * contents can be overridden by the composite_dev glue.
+	 */
+
+	/* device descriptor strings: manufacturer, product */
+	snprintf(manufacturer, sizeof manufacturer, "%s %s with %s",
+		init_utsname()->sysname, init_utsname()->release,
+		gadget->name);
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto fail;
+	strings_dev[STRING_MANUFACTURER_IDX].id = status;
+	device_desc.iManufacturer = status;
+
+	status = usb_string_id(cdev);
+	if (status < 0)
+		goto fail;
+	strings_dev[STRING_PRODUCT_IDX].id = status;
+	device_desc.iProduct = status;
+
+	status = usb_add_config(cdev, &ncm_config_driver,
+				ncm_do_config);
+	if (status < 0)
+		goto fail;
+
+	dev_info(&gadget->dev, "%s\n", DRIVER_DESC);
+
+	return 0;
+
+fail:
+	gether_cleanup();
+	return status;
+}
+
+static int __exit gncm_unbind(struct usb_composite_dev *cdev)
+{
+	gether_cleanup();
+	return 0;
+}
+
+static struct usb_composite_driver ncm_driver = {
+	.name		= "g_ncm",
+	.dev		= &device_desc,
+	.strings	= dev_strings,
+	.unbind		= __exit_p(gncm_unbind),
+};
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Yauheni Kaliuta");
+MODULE_LICENSE("GPL");
+
+static int __init init(void)
+{
+	return usb_composite_probe(&ncm_driver, gncm_bind);
+}
+module_init(init);
+
+static void __exit cleanup(void)
+{
+	usb_composite_unregister(&ncm_driver);
+}
+module_exit(cleanup);
diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c
new file mode 100644
index 00000000000..0c8dd81dddc
--- /dev/null
+++ b/drivers/usb/gadget/pch_udc.c
@@ -0,0 +1,2947 @@
+/*
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Address offset of Registers */
+#define UDC_EP_REG_SHIFT	0x20	/* Offset to next EP */
+
+#define UDC_EPCTL_ADDR		0x00	/* Endpoint control */
+#define UDC_EPSTS_ADDR		0x04	/* Endpoint status */
+#define UDC_BUFIN_FRAMENUM_ADDR	0x08	/* buffer size in / frame number out */
+#define UDC_BUFOUT_MAXPKT_ADDR	0x0C	/* buffer size out / maxpkt in */
+#define UDC_SUBPTR_ADDR		0x10	/* setup buffer pointer */
+#define UDC_DESPTR_ADDR		0x14	/* Data descriptor pointer */
+#define UDC_CONFIRM_ADDR	0x18	/* Write/Read confirmation */
+
+#define UDC_DEVCFG_ADDR		0x400	/* Device configuration */
+#define UDC_DEVCTL_ADDR		0x404	/* Device control */
+#define UDC_DEVSTS_ADDR		0x408	/* Device status */
+#define UDC_DEVIRQSTS_ADDR	0x40C	/* Device irq status */
+#define UDC_DEVIRQMSK_ADDR	0x410	/* Device irq mask */
+#define UDC_EPIRQSTS_ADDR	0x414	/* Endpoint irq status */
+#define UDC_EPIRQMSK_ADDR	0x418	/* Endpoint irq mask */
+#define UDC_DEVLPM_ADDR		0x41C	/* LPM control / status */
+#define UDC_CSR_BUSY_ADDR	0x4f0	/* UDC_CSR_BUSY Status register */
+#define UDC_SRST_ADDR		0x4fc	/* SOFT RESET register */
+#define UDC_CSR_ADDR		0x500	/* USB_DEVICE endpoint register */
+
+/* Endpoint control register */
+/* Bit position */
+#define UDC_EPCTL_MRXFLUSH		(1 << 12)
+#define UDC_EPCTL_RRDY			(1 << 9)
+#define UDC_EPCTL_CNAK			(1 << 8)
+#define UDC_EPCTL_SNAK			(1 << 7)
+#define UDC_EPCTL_NAK			(1 << 6)
+#define UDC_EPCTL_P			(1 << 3)
+#define UDC_EPCTL_F			(1 << 1)
+#define UDC_EPCTL_S			(1 << 0)
+#define UDC_EPCTL_ET_SHIFT		4
+/* Mask patern */
+#define UDC_EPCTL_ET_MASK		0x00000030
+/* Value for ET field */
+#define UDC_EPCTL_ET_CONTROL		0
+#define UDC_EPCTL_ET_ISO		1
+#define UDC_EPCTL_ET_BULK		2
+#define UDC_EPCTL_ET_INTERRUPT		3
+
+/* Endpoint status register */
+/* Bit position */
+#define UDC_EPSTS_XFERDONE		(1 << 27)
+#define UDC_EPSTS_RSS			(1 << 26)
+#define UDC_EPSTS_RCS			(1 << 25)
+#define UDC_EPSTS_TXEMPTY		(1 << 24)
+#define UDC_EPSTS_TDC			(1 << 10)
+#define UDC_EPSTS_HE			(1 << 9)
+#define UDC_EPSTS_MRXFIFO_EMP		(1 << 8)
+#define UDC_EPSTS_BNA			(1 << 7)
+#define UDC_EPSTS_IN			(1 << 6)
+#define UDC_EPSTS_OUT_SHIFT		4
+/* Mask patern */
+#define UDC_EPSTS_OUT_MASK		0x00000030
+#define UDC_EPSTS_ALL_CLR_MASK		0x1F0006F0
+/* Value for OUT field */
+#define UDC_EPSTS_OUT_SETUP		2
+#define UDC_EPSTS_OUT_DATA		1
+
+/* Device configuration register */
+/* Bit position */
+#define UDC_DEVCFG_CSR_PRG		(1 << 17)
+#define UDC_DEVCFG_SP			(1 << 3)
+/* SPD Valee */
+#define UDC_DEVCFG_SPD_HS		0x0
+#define UDC_DEVCFG_SPD_FS		0x1
+#define UDC_DEVCFG_SPD_LS		0x2
+
+/* Device control register */
+/* Bit position */
+#define UDC_DEVCTL_THLEN_SHIFT		24
+#define UDC_DEVCTL_BRLEN_SHIFT		16
+#define UDC_DEVCTL_CSR_DONE		(1 << 13)
+#define UDC_DEVCTL_SD			(1 << 10)
+#define UDC_DEVCTL_MODE			(1 << 9)
+#define UDC_DEVCTL_BREN			(1 << 8)
+#define UDC_DEVCTL_THE			(1 << 7)
+#define UDC_DEVCTL_DU			(1 << 4)
+#define UDC_DEVCTL_TDE			(1 << 3)
+#define UDC_DEVCTL_RDE			(1 << 2)
+#define UDC_DEVCTL_RES			(1 << 0)
+
+/* Device status register */
+/* Bit position */
+#define UDC_DEVSTS_TS_SHIFT		18
+#define UDC_DEVSTS_ENUM_SPEED_SHIFT	13
+#define UDC_DEVSTS_ALT_SHIFT		8
+#define UDC_DEVSTS_INTF_SHIFT		4
+#define UDC_DEVSTS_CFG_SHIFT		0
+/* Mask patern */
+#define UDC_DEVSTS_TS_MASK		0xfffc0000
+#define UDC_DEVSTS_ENUM_SPEED_MASK	0x00006000
+#define UDC_DEVSTS_ALT_MASK		0x00000f00
+#define UDC_DEVSTS_INTF_MASK		0x000000f0
+#define UDC_DEVSTS_CFG_MASK		0x0000000f
+/* value for maximum speed for SPEED field */
+#define UDC_DEVSTS_ENUM_SPEED_FULL	1
+#define UDC_DEVSTS_ENUM_SPEED_HIGH	0
+#define UDC_DEVSTS_ENUM_SPEED_LOW	2
+#define UDC_DEVSTS_ENUM_SPEED_FULLX	3
+
+/* Device irq register */
+/* Bit position */
+#define UDC_DEVINT_RWKP			(1 << 7)
+#define UDC_DEVINT_ENUM			(1 << 6)
+#define UDC_DEVINT_SOF			(1 << 5)
+#define UDC_DEVINT_US			(1 << 4)
+#define UDC_DEVINT_UR			(1 << 3)
+#define UDC_DEVINT_ES			(1 << 2)
+#define UDC_DEVINT_SI			(1 << 1)
+#define UDC_DEVINT_SC			(1 << 0)
+/* Mask patern */
+#define UDC_DEVINT_MSK			0x7f
+
+/* Endpoint irq register */
+/* Bit position */
+#define UDC_EPINT_IN_SHIFT		0
+#define UDC_EPINT_OUT_SHIFT		16
+#define UDC_EPINT_IN_EP0		(1 << 0)
+#define UDC_EPINT_OUT_EP0		(1 << 16)
+/* Mask patern */
+#define UDC_EPINT_MSK_DISABLE_ALL	0xffffffff
+
+/* UDC_CSR_BUSY Status register */
+/* Bit position */
+#define UDC_CSR_BUSY			(1 << 0)
+
+/* SOFT RESET register */
+/* Bit position */
+#define UDC_PSRST			(1 << 1)
+#define UDC_SRST			(1 << 0)
+
+/* USB_DEVICE endpoint register */
+/* Bit position */
+#define UDC_CSR_NE_NUM_SHIFT		0
+#define UDC_CSR_NE_DIR_SHIFT		4
+#define UDC_CSR_NE_TYPE_SHIFT		5
+#define UDC_CSR_NE_CFG_SHIFT		7
+#define UDC_CSR_NE_INTF_SHIFT		11
+#define UDC_CSR_NE_ALT_SHIFT		15
+#define UDC_CSR_NE_MAX_PKT_SHIFT	19
+/* Mask patern */
+#define UDC_CSR_NE_NUM_MASK		0x0000000f
+#define UDC_CSR_NE_DIR_MASK		0x00000010
+#define UDC_CSR_NE_TYPE_MASK		0x00000060
+#define UDC_CSR_NE_CFG_MASK		0x00000780
+#define UDC_CSR_NE_INTF_MASK		0x00007800
+#define UDC_CSR_NE_ALT_MASK		0x00078000
+#define UDC_CSR_NE_MAX_PKT_MASK		0x3ff80000
+
+#define PCH_UDC_CSR(ep)	(UDC_CSR_ADDR + ep*4)
+#define PCH_UDC_EPINT(in, num)\
+		(1 << (num + (in ? UDC_EPINT_IN_SHIFT : UDC_EPINT_OUT_SHIFT)))
+
+/* Index of endpoint */
+#define UDC_EP0IN_IDX		0
+#define UDC_EP0OUT_IDX		1
+#define UDC_EPIN_IDX(ep)	(ep * 2)
+#define UDC_EPOUT_IDX(ep)	(ep * 2 + 1)
+#define PCH_UDC_EP0		0
+#define PCH_UDC_EP1		1
+#define PCH_UDC_EP2		2
+#define PCH_UDC_EP3		3
+
+/* Number of endpoint */
+#define PCH_UDC_EP_NUM		32	/* Total number of EPs (16 IN,16 OUT) */
+#define PCH_UDC_USED_EP_NUM	4	/* EP number of EP's really used */
+/* Length Value */
+#define PCH_UDC_BRLEN		0x0F	/* Burst length */
+#define PCH_UDC_THLEN		0x1F	/* Threshold length */
+/* Value of EP Buffer Size */
+#define UDC_EP0IN_BUFF_SIZE	64
+#define UDC_EPIN_BUFF_SIZE	512
+#define UDC_EP0OUT_BUFF_SIZE	64
+#define UDC_EPOUT_BUFF_SIZE	512
+/* Value of EP maximum packet size */
+#define UDC_EP0IN_MAX_PKT_SIZE	64
+#define UDC_EP0OUT_MAX_PKT_SIZE	64
+#define UDC_BULK_MAX_PKT_SIZE	512
+
+/* DMA */
+#define DMA_DIR_RX		1	/* DMA for data receive */
+#define DMA_DIR_TX		2	/* DMA for data transmit */
+#define DMA_ADDR_INVALID	(~(dma_addr_t)0)
+#define UDC_DMA_MAXPACKET	65536	/* maximum packet size for DMA */
+
+/**
+ * struct pch_udc_data_dma_desc - Structure to hold DMA descriptor information
+ *				  for data
+ * @status:		Status quadlet
+ * @reserved:		Reserved
+ * @dataptr:		Buffer descriptor
+ * @next:		Next descriptor
+ */
+struct pch_udc_data_dma_desc {
+	u32 status;
+	u32 reserved;
+	u32 dataptr;
+	u32 next;
+};
+
+/**
+ * struct pch_udc_stp_dma_desc - Structure to hold DMA descriptor information
+ *				 for control data
+ * @status:	Status
+ * @reserved:	Reserved
+ * @data12:	First setup word
+ * @data34:	Second setup word
+ */
+struct pch_udc_stp_dma_desc {
+	u32 status;
+	u32 reserved;
+	struct usb_ctrlrequest request;
+} __attribute((packed));
+
+/* DMA status definitions */
+/* Buffer status */
+#define PCH_UDC_BUFF_STS	0xC0000000
+#define PCH_UDC_BS_HST_RDY	0x00000000
+#define PCH_UDC_BS_DMA_BSY	0x40000000
+#define PCH_UDC_BS_DMA_DONE	0x80000000
+#define PCH_UDC_BS_HST_BSY	0xC0000000
+/*  Rx/Tx Status */
+#define PCH_UDC_RXTX_STS	0x30000000
+#define PCH_UDC_RTS_SUCC	0x00000000
+#define PCH_UDC_RTS_DESERR	0x10000000
+#define PCH_UDC_RTS_BUFERR	0x30000000
+/* Last Descriptor Indication */
+#define PCH_UDC_DMA_LAST	0x08000000
+/* Number of Rx/Tx Bytes Mask */
+#define PCH_UDC_RXTX_BYTES	0x0000ffff
+
+/**
+ * struct pch_udc_cfg_data - Structure to hold current configuration
+ *			     and interface information
+ * @cur_cfg:	current configuration in use
+ * @cur_intf:	current interface in use
+ * @cur_alt:	current alt interface in use
+ */
+struct pch_udc_cfg_data {
+	u16 cur_cfg;
+	u16 cur_intf;
+	u16 cur_alt;
+};
+
+/**
+ * struct pch_udc_ep - Structure holding a PCH USB device Endpoint information
+ * @ep:			embedded ep request
+ * @td_stp_phys:	for setup request
+ * @td_data_phys:	for data request
+ * @td_stp:		for setup request
+ * @td_data:		for data request
+ * @dev:		reference to device struct
+ * @offset_addr:	offset address of ep register
+ * @desc:		for this ep
+ * @queue:		queue for requests
+ * @num:		endpoint number
+ * @in:			endpoint is IN
+ * @halted:		endpoint halted?
+ * @epsts:		Endpoint status
+ */
+struct pch_udc_ep {
+	struct usb_ep			ep;
+	dma_addr_t			td_stp_phys;
+	dma_addr_t			td_data_phys;
+	struct pch_udc_stp_dma_desc	*td_stp;
+	struct pch_udc_data_dma_desc	*td_data;
+	struct pch_udc_dev		*dev;
+	unsigned long			offset_addr;
+	const struct usb_endpoint_descriptor	*desc;
+	struct list_head		queue;
+	unsigned			num:5,
+					in:1,
+					halted:1;
+	unsigned long			epsts;
+};
+
+/**
+ * struct pch_udc_dev - Structure holding complete information
+ *			of the PCH USB device
+ * @gadget:		gadget driver data
+ * @driver:		reference to gadget driver bound
+ * @pdev:		reference to the PCI device
+ * @ep:			array of endpoints
+ * @lock:		protects all state
+ * @active:		enabled the PCI device
+ * @stall:		stall requested
+ * @prot_stall:		protcol stall requested
+ * @irq_registered:	irq registered with system
+ * @mem_region:		device memory mapped
+ * @registered:		driver regsitered with system
+ * @suspended:		driver in suspended state
+ * @connected:		gadget driver associated
+ * @set_cfg_not_acked:	pending acknowledgement 4 setup
+ * @waiting_zlp_ack:	pending acknowledgement 4 ZLP
+ * @data_requests:	DMA pool for data requests
+ * @stp_requests:	DMA pool for setup requests
+ * @dma_addr:		DMA pool for received
+ * @ep0out_buf:		Buffer for DMA
+ * @setup_data:		Received setup data
+ * @phys_addr:		of device memory
+ * @base_addr:		for mapped device memory
+ * @irq:		IRQ line for the device
+ * @cfg_data:		current cfg, intf, and alt in use
+ */
+struct pch_udc_dev {
+	struct usb_gadget		gadget;
+	struct usb_gadget_driver	*driver;
+	struct pci_dev			*pdev;
+	struct pch_udc_ep		ep[PCH_UDC_EP_NUM];
+	spinlock_t			lock; /* protects all state */
+	unsigned	active:1,
+			stall:1,
+			prot_stall:1,
+			irq_registered:1,
+			mem_region:1,
+			registered:1,
+			suspended:1,
+			connected:1,
+			set_cfg_not_acked:1,
+			waiting_zlp_ack:1;
+	struct pci_pool		*data_requests;
+	struct pci_pool		*stp_requests;
+	dma_addr_t			dma_addr;
+	unsigned long			ep0out_buf[64];
+	struct usb_ctrlrequest		setup_data;
+	unsigned long			phys_addr;
+	void __iomem			*base_addr;
+	unsigned			irq;
+	struct pch_udc_cfg_data	cfg_data;
+};
+
+#define PCH_UDC_PCI_BAR			1
+#define PCI_DEVICE_ID_INTEL_EG20T_UDC	0x8808
+
+static const char	ep0_string[] = "ep0in";
+static DEFINE_SPINLOCK(udc_stall_spinlock);	/* stall spin lock */
+struct pch_udc_dev *pch_udc;		/* pointer to device object */
+
+static int speed_fs;
+module_param_named(speed_fs, speed_fs, bool, S_IRUGO);
+MODULE_PARM_DESC(speed_fs, "true for Full speed operation");
+
+/**
+ * struct pch_udc_request - Structure holding a PCH USB device request packet
+ * @req:		embedded ep request
+ * @td_data_phys:	phys. address
+ * @td_data:		first dma desc. of chain
+ * @td_data_last:	last dma desc. of chain
+ * @queue:		associated queue
+ * @dma_going:		DMA in progress for request
+ * @dma_mapped:		DMA memory mapped for request
+ * @dma_done:		DMA completed for request
+ * @chain_len:		chain length
+ */
+struct pch_udc_request {
+	struct usb_request		req;
+	dma_addr_t			td_data_phys;
+	struct pch_udc_data_dma_desc	*td_data;
+	struct pch_udc_data_dma_desc	*td_data_last;
+	struct list_head		queue;
+	unsigned			dma_going:1,
+					dma_mapped:1,
+					dma_done:1;
+	unsigned			chain_len;
+};
+
+static inline u32 pch_udc_readl(struct pch_udc_dev *dev, unsigned long reg)
+{
+	return ioread32(dev->base_addr + reg);
+}
+
+static inline void pch_udc_writel(struct pch_udc_dev *dev,
+				    unsigned long val, unsigned long reg)
+{
+	iowrite32(val, dev->base_addr + reg);
+}
+
+static inline void pch_udc_bit_set(struct pch_udc_dev *dev,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_writel(dev, pch_udc_readl(dev, reg) | bitmask, reg);
+}
+
+static inline void pch_udc_bit_clr(struct pch_udc_dev *dev,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_writel(dev, pch_udc_readl(dev, reg) & ~(bitmask), reg);
+}
+
+static inline u32 pch_udc_ep_readl(struct pch_udc_ep *ep, unsigned long reg)
+{
+	return ioread32(ep->dev->base_addr + ep->offset_addr + reg);
+}
+
+static inline void pch_udc_ep_writel(struct pch_udc_ep *ep,
+				    unsigned long val, unsigned long reg)
+{
+	iowrite32(val, ep->dev->base_addr + ep->offset_addr + reg);
+}
+
+static inline void pch_udc_ep_bit_set(struct pch_udc_ep *ep,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) | bitmask, reg);
+}
+
+static inline void pch_udc_ep_bit_clr(struct pch_udc_ep *ep,
+				     unsigned long reg,
+				     unsigned long bitmask)
+{
+	pch_udc_ep_writel(ep, pch_udc_ep_readl(ep, reg) & ~(bitmask), reg);
+}
+
+/**
+ * pch_udc_csr_busy() - Wait till idle.
+ * @dev:	Reference to pch_udc_dev structure
+ */
+static void pch_udc_csr_busy(struct pch_udc_dev *dev)
+{
+	unsigned int count = 200;
+
+	/* Wait till idle */
+	while ((pch_udc_readl(dev, UDC_CSR_BUSY_ADDR) & UDC_CSR_BUSY)
+		&& --count)
+		cpu_relax();
+	if (!count)
+		dev_err(&dev->pdev->dev, "%s: wait error\n", __func__);
+}
+
+/**
+ * pch_udc_write_csr() - Write the command and status registers.
+ * @dev:	Reference to pch_udc_dev structure
+ * @val:	value to be written to CSR register
+ * @addr:	address of CSR register
+ */
+static void pch_udc_write_csr(struct pch_udc_dev *dev, unsigned long val,
+			       unsigned int ep)
+{
+	unsigned long reg = PCH_UDC_CSR(ep);
+
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	pch_udc_writel(dev, val, reg);
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+}
+
+/**
+ * pch_udc_read_csr() - Read the command and status registers.
+ * @dev:	Reference to pch_udc_dev structure
+ * @addr:	address of CSR register
+ *
+ * Return codes:	content of CSR register
+ */
+static u32 pch_udc_read_csr(struct pch_udc_dev *dev, unsigned int ep)
+{
+	unsigned long reg = PCH_UDC_CSR(ep);
+
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	pch_udc_readl(dev, reg);	/* Dummy read */
+	pch_udc_csr_busy(dev);		/* Wait till idle */
+	return pch_udc_readl(dev, reg);
+}
+
+/**
+ * pch_udc_rmt_wakeup() - Initiate for remote wakeup
+ * @dev:	Reference to pch_udc_dev structure
+ */
+static inline void pch_udc_rmt_wakeup(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	mdelay(1);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
+ * pch_udc_get_frame() - Get the current frame from device status register
+ * @dev:	Reference to pch_udc_dev structure
+ * Retern	current frame
+ */
+static inline int pch_udc_get_frame(struct pch_udc_dev *dev)
+{
+	u32 frame = pch_udc_readl(dev, UDC_DEVSTS_ADDR);
+	return (frame & UDC_DEVSTS_TS_MASK) >> UDC_DEVSTS_TS_SHIFT;
+}
+
+/**
+ * pch_udc_clear_selfpowered() - Clear the self power control
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_clear_selfpowered(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_clr(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
+}
+
+/**
+ * pch_udc_set_selfpowered() - Set the self power control
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_set_selfpowered(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_SP);
+}
+
+/**
+ * pch_udc_set_disconnect() - Set the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static inline void pch_udc_set_disconnect(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+}
+
+/**
+ * pch_udc_clear_disconnect() - Clear the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static void pch_udc_clear_disconnect(struct pch_udc_dev *dev)
+{
+	/* Clear the disconnect */
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_SD);
+	mdelay(1);
+	/* Resume USB signalling */
+	pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RES);
+}
+
+/**
+ * pch_udc_vbus_session() - set or clearr the disconnect status.
+ * @dev:	Reference to pch_udc_regs structure
+ * @is_active:	Parameter specifying the action
+ *		  0:   indicating VBUS power is ending
+ *		  !0:  indicating VBUS power is starting
+ */
+static inline void pch_udc_vbus_session(struct pch_udc_dev *dev,
+					  int is_active)
+{
+	if (is_active)
+		pch_udc_clear_disconnect(dev);
+	else
+		pch_udc_set_disconnect(dev);
+}
+
+/**
+ * pch_udc_ep_set_stall() - Set the stall of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_set_stall(struct pch_udc_ep *ep)
+{
+	if (ep->in) {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	} else {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	}
+}
+
+/**
+ * pch_udc_ep_clear_stall() - Clear the stall of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_clear_stall(struct pch_udc_ep *ep)
+{
+	/* Clear the stall */
+	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_S);
+	/* Clear NAK by writing CNAK */
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
+}
+
+/**
+ * pch_udc_ep_set_trfr_type() - Set the transfer type of endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @type:	Type of endpoint
+ */
+static inline void pch_udc_ep_set_trfr_type(struct pch_udc_ep *ep,
+					u8 type)
+{
+	pch_udc_ep_writel(ep, ((type << UDC_EPCTL_ET_SHIFT) &
+				UDC_EPCTL_ET_MASK), UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_bufsz() - Set the maximum packet size for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @buf_size:	The buffer size
+ */
+static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep,
+						 u32 buf_size, u32 ep_in)
+{
+	u32 data;
+	if (ep_in) {
+		data = pch_udc_ep_readl(ep, UDC_BUFIN_FRAMENUM_ADDR);
+		data = (data & 0xffff0000) | (buf_size & 0xffff);
+		pch_udc_ep_writel(ep, data, UDC_BUFIN_FRAMENUM_ADDR);
+	} else {
+		data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
+		data = (buf_size << 16) | (data & 0xffff);
+		pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
+	}
+}
+
+/**
+ * pch_udc_ep_set_maxpkt() - Set the Max packet size for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @pkt_size:	The packet size
+ */
+static void pch_udc_ep_set_maxpkt(struct pch_udc_ep *ep, u32 pkt_size)
+{
+	u32 data = pch_udc_ep_readl(ep, UDC_BUFOUT_MAXPKT_ADDR);
+	data = (data & 0xffff0000) | (pkt_size & 0xffff);
+	pch_udc_ep_writel(ep, data, UDC_BUFOUT_MAXPKT_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_subptr() - Set the Setup buffer pointer for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @addr:	Address of the register
+ */
+static inline void pch_udc_ep_set_subptr(struct pch_udc_ep *ep, u32 addr)
+{
+	pch_udc_ep_writel(ep, addr, UDC_SUBPTR_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_ddptr() - Set the Data descriptor pointer for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @addr:	Address of the register
+ */
+static inline void pch_udc_ep_set_ddptr(struct pch_udc_ep *ep, u32 addr)
+{
+	pch_udc_ep_writel(ep, addr, UDC_DESPTR_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_pd() - Set the poll demand bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_pd(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_P);
+}
+
+/**
+ * pch_udc_ep_set_rrdy() - Set the receive ready bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_rrdy(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
+}
+
+/**
+ * pch_udc_ep_clear_rrdy() - Clear the receive ready bit for the endpoint
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_clear_rrdy(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_RRDY);
+}
+
+/**
+ * pch_udc_set_dma() - Set the 'TDE' or RDE bit of device control
+ *			register depending on the direction specified
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @dir:	whether Tx or Rx
+ *		  DMA_DIR_RX: Receive
+ *		  DMA_DIR_TX: Transmit
+ */
+static inline void pch_udc_set_dma(struct pch_udc_dev *dev, int dir)
+{
+	if (dir == DMA_DIR_RX)
+		pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
+	else if (dir == DMA_DIR_TX)
+		pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
+}
+
+/**
+ * pch_udc_clear_dma() - Clear the 'TDE' or RDE bit of device control
+ *				 register depending on the direction specified
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @dir:	Whether Tx or Rx
+ *		  DMA_DIR_RX: Receive
+ *		  DMA_DIR_TX: Transmit
+ */
+static inline void pch_udc_clear_dma(struct pch_udc_dev *dev, int dir)
+{
+	if (dir == DMA_DIR_RX)
+		pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_RDE);
+	else if (dir == DMA_DIR_TX)
+		pch_udc_bit_clr(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_TDE);
+}
+
+/**
+ * pch_udc_set_csr_done() - Set the device control register
+ *				CSR done field (bit 13)
+ * @dev:	reference to structure of type pch_udc_regs
+ */
+static inline void pch_udc_set_csr_done(struct pch_udc_dev *dev)
+{
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR, UDC_DEVCTL_CSR_DONE);
+}
+
+/**
+ * pch_udc_disable_interrupts() - Disables the specified interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to disable interrupts
+ */
+static inline void pch_udc_disable_interrupts(struct pch_udc_dev *dev,
+					    u32 mask)
+{
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_enable_interrupts() - Enable the specified interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to enable interrupts
+ */
+static inline void pch_udc_enable_interrupts(struct pch_udc_dev *dev,
+					   u32 mask)
+{
+	pch_udc_bit_clr(dev, UDC_DEVIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_disable_ep_interrupts() - Disable endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to disable interrupts
+ */
+static inline void pch_udc_disable_ep_interrupts(struct pch_udc_dev *dev,
+						u32 mask)
+{
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_enable_ep_interrupts() - Enable endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @mask:	Mask to enable interrupts
+ */
+static inline void pch_udc_enable_ep_interrupts(struct pch_udc_dev *dev,
+					      u32 mask)
+{
+	pch_udc_bit_clr(dev, UDC_EPIRQMSK_ADDR, mask);
+}
+
+/**
+ * pch_udc_read_device_interrupts() - Read the device interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The device interrupts
+ */
+static inline u32 pch_udc_read_device_interrupts(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_DEVIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_write_device_interrupts() - Write device interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @val:	The value to be written to interrupt register
+ */
+static inline void pch_udc_write_device_interrupts(struct pch_udc_dev *dev,
+						     u32 val)
+{
+	pch_udc_writel(dev, val, UDC_DEVIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_interrupts() - Read the endpoint interrupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The endpoint interrupt
+ */
+static inline u32 pch_udc_read_ep_interrupts(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_EPIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_write_ep_interrupts() - Clear endpoint interupts
+ * @dev:	Reference to structure of type pch_udc_regs
+ * @val:	The value to be written to interrupt register
+ */
+static inline void pch_udc_write_ep_interrupts(struct pch_udc_dev *dev,
+					     u32 val)
+{
+	pch_udc_writel(dev, val, UDC_EPIRQSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_device_status() - Read the device status
+ * @dev:	Reference to structure of type pch_udc_regs
+ * Retern	The device status
+ */
+static inline u32 pch_udc_read_device_status(struct pch_udc_dev *dev)
+{
+	return pch_udc_readl(dev, UDC_DEVSTS_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_control() - Read the endpoint control
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint control register value
+ */
+static inline u32 pch_udc_read_ep_control(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_readl(ep, UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_clear_ep_control() - Clear the endpoint control register
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint control register value
+ */
+static inline void pch_udc_clear_ep_control(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_writel(ep, 0, UDC_EPCTL_ADDR);
+}
+
+/**
+ * pch_udc_read_ep_status() - Read the endpoint status
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * Retern	The endpoint status
+ */
+static inline u32 pch_udc_read_ep_status(struct pch_udc_ep *ep)
+{
+	return pch_udc_ep_readl(ep, UDC_EPSTS_ADDR);
+}
+
+/**
+ * pch_udc_clear_ep_status() - Clear the endpoint status
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ * @stat:	Endpoint status
+ */
+static inline void pch_udc_clear_ep_status(struct pch_udc_ep *ep,
+					 u32 stat)
+{
+	return pch_udc_ep_writel(ep, stat, UDC_EPSTS_ADDR);
+}
+
+/**
+ * pch_udc_ep_set_nak() - Set the bit 7 (SNAK field)
+ *				of the endpoint control register
+ * @ep:		Reference to structure of type pch_udc_ep_regs
+ */
+static inline void pch_udc_ep_set_nak(struct pch_udc_ep *ep)
+{
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_SNAK);
+}
+
+/**
+ * pch_udc_ep_clear_nak() - Set the bit 8 (CNAK field)
+ *				of the endpoint control register
+ * @ep:		reference to structure of type pch_udc_ep_regs
+ */
+static void pch_udc_ep_clear_nak(struct pch_udc_ep *ep)
+{
+	unsigned int loopcnt = 0;
+	struct pch_udc_dev *dev = ep->dev;
+
+	if (!(pch_udc_ep_readl(ep, UDC_EPCTL_ADDR) & UDC_EPCTL_NAK))
+		return;
+	if (!ep->in) {
+		loopcnt = 10000;
+		while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
+			--loopcnt)
+			udelay(5);
+		if (!loopcnt)
+			dev_err(&dev->pdev->dev, "%s: RxFIFO not Empty\n",
+				__func__);
+	}
+	loopcnt = 10000;
+	while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_NAK) && --loopcnt) {
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_CNAK);
+		udelay(5);
+	}
+	if (!loopcnt)
+		dev_err(&dev->pdev->dev, "%s: Clear NAK not set for ep%d%s\n",
+			__func__, ep->num, (ep->in ? "in" : "out"));
+}
+
+/**
+ * pch_udc_ep_fifo_flush() - Flush the endpoint fifo
+ * @ep:	reference to structure of type pch_udc_ep_regs
+ * @dir:	direction of endpoint
+ *		  0:  endpoint is OUT
+ *		  !0: endpoint is IN
+ */
+static void pch_udc_ep_fifo_flush(struct pch_udc_ep *ep, int dir)
+{
+	unsigned int loopcnt = 0;
+	struct pch_udc_dev *dev = ep->dev;
+
+	if (dir) {	/* IN ep */
+		pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F);
+		return;
+	}
+
+	if (pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP)
+		return;
+	pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_MRXFLUSH);
+	/* Wait for RxFIFO Empty */
+	loopcnt = 10000;
+	while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) &&
+		--loopcnt)
+		udelay(5);
+	if (!loopcnt)
+		dev_err(&dev->pdev->dev, "RxFIFO not Empty\n");
+	pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_MRXFLUSH);
+}
+
+/**
+ * pch_udc_ep_enable() - This api enables endpoint
+ * @regs:	Reference to structure pch_udc_ep_regs
+ * @desc:	endpoint descriptor
+ */
+static void pch_udc_ep_enable(struct pch_udc_ep *ep,
+			       struct pch_udc_cfg_data *cfg,
+			       const struct usb_endpoint_descriptor *desc)
+{
+	u32 val = 0;
+	u32 buff_size = 0;
+
+	pch_udc_ep_set_trfr_type(ep, desc->bmAttributes);
+	if (ep->in)
+		buff_size = UDC_EPIN_BUFF_SIZE;
+	else
+		buff_size = UDC_EPOUT_BUFF_SIZE;
+	pch_udc_ep_set_bufsz(ep, buff_size, ep->in);
+	pch_udc_ep_set_maxpkt(ep, le16_to_cpu(desc->wMaxPacketSize));
+	pch_udc_ep_set_nak(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	/* Configure the endpoint */
+	val = ep->num << UDC_CSR_NE_NUM_SHIFT | ep->in << UDC_CSR_NE_DIR_SHIFT |
+	      ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) <<
+		UDC_CSR_NE_TYPE_SHIFT) |
+	      (cfg->cur_cfg << UDC_CSR_NE_CFG_SHIFT) |
+	      (cfg->cur_intf << UDC_CSR_NE_INTF_SHIFT) |
+	      (cfg->cur_alt << UDC_CSR_NE_ALT_SHIFT) |
+	      le16_to_cpu(desc->wMaxPacketSize) << UDC_CSR_NE_MAX_PKT_SHIFT;
+
+	if (ep->in)
+		pch_udc_write_csr(ep->dev, val, UDC_EPIN_IDX(ep->num));
+	else
+		pch_udc_write_csr(ep->dev, val, UDC_EPOUT_IDX(ep->num));
+}
+
+/**
+ * pch_udc_ep_disable() - This api disables endpoint
+ * @regs:	Reference to structure pch_udc_ep_regs
+ */
+static void pch_udc_ep_disable(struct pch_udc_ep *ep)
+{
+	if (ep->in) {
+		/* flush the fifo */
+		pch_udc_ep_writel(ep, UDC_EPCTL_F, UDC_EPCTL_ADDR);
+		/* set NAK */
+		pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
+		pch_udc_ep_bit_set(ep, UDC_EPSTS_ADDR, UDC_EPSTS_IN);
+	} else {
+		/* set NAK */
+		pch_udc_ep_writel(ep, UDC_EPCTL_SNAK, UDC_EPCTL_ADDR);
+	}
+	/* reset desc pointer */
+	pch_udc_ep_writel(ep, 0, UDC_DESPTR_ADDR);
+}
+
+/**
+ * pch_udc_wait_ep_stall() - Wait EP stall.
+ * @dev:	Reference to pch_udc_dev structure
+ */
+static void pch_udc_wait_ep_stall(struct pch_udc_ep *ep)
+{
+	unsigned int count = 10000;
+
+	/* Wait till idle */
+	while ((pch_udc_read_ep_control(ep) & UDC_EPCTL_S) && --count)
+		udelay(5);
+	if (!count)
+		dev_err(&ep->dev->pdev->dev, "%s: wait error\n", __func__);
+}
+
+/**
+ * pch_udc_init() - This API initializes usb device controller
+ * @dev:	Rreference to pch_udc_regs structure
+ */
+static void pch_udc_init(struct pch_udc_dev *dev)
+{
+	if (NULL == dev) {
+		pr_err("%s: Invalid address\n", __func__);
+		return;
+	}
+	/* Soft Reset and Reset PHY */
+	pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+	pch_udc_writel(dev, UDC_SRST | UDC_PSRST, UDC_SRST_ADDR);
+	mdelay(1);
+	pch_udc_writel(dev, UDC_SRST, UDC_SRST_ADDR);
+	pch_udc_writel(dev, 0x00, UDC_SRST_ADDR);
+	mdelay(1);
+	/* mask and clear all device interrupts */
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
+	pch_udc_bit_set(dev, UDC_DEVIRQSTS_ADDR, UDC_DEVINT_MSK);
+
+	/* mask and clear all ep interrupts */
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+	pch_udc_bit_set(dev, UDC_EPIRQSTS_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+
+	/* enable dynamic CSR programmingi, self powered and device speed */
+	if (speed_fs)
+		pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
+				UDC_DEVCFG_SP | UDC_DEVCFG_SPD_FS);
+	else /* defaul high speed */
+		pch_udc_bit_set(dev, UDC_DEVCFG_ADDR, UDC_DEVCFG_CSR_PRG |
+				UDC_DEVCFG_SP | UDC_DEVCFG_SPD_HS);
+	pch_udc_bit_set(dev, UDC_DEVCTL_ADDR,
+			(PCH_UDC_THLEN << UDC_DEVCTL_THLEN_SHIFT) |
+			(PCH_UDC_BRLEN << UDC_DEVCTL_BRLEN_SHIFT) |
+			UDC_DEVCTL_MODE | UDC_DEVCTL_BREN |
+			UDC_DEVCTL_THE);
+}
+
+/**
+ * pch_udc_exit() - This API exit usb device controller
+ * @dev:	Reference to pch_udc_regs structure
+ */
+static void pch_udc_exit(struct pch_udc_dev *dev)
+{
+	/* mask all device interrupts */
+	pch_udc_bit_set(dev, UDC_DEVIRQMSK_ADDR, UDC_DEVINT_MSK);
+	/* mask all ep interrupts */
+	pch_udc_bit_set(dev, UDC_EPIRQMSK_ADDR, UDC_EPINT_MSK_DISABLE_ALL);
+	/* put device in disconnected state */
+	pch_udc_set_disconnect(dev);
+}
+
+/**
+ * pch_udc_pcd_get_frame() - This API is invoked to get the current frame number
+ * @gadget:	Reference to the gadget driver
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_get_frame(struct usb_gadget *gadget)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	return pch_udc_get_frame(dev);
+}
+
+/**
+ * pch_udc_pcd_wakeup() - This API is invoked to initiate a remote wakeup
+ * @gadget:	Reference to the gadget driver
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_wakeup(struct usb_gadget *gadget)
+{
+	struct pch_udc_dev	*dev;
+	unsigned long		flags;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	spin_lock_irqsave(&dev->lock, flags);
+	pch_udc_rmt_wakeup(dev);
+	spin_unlock_irqrestore(&dev->lock, flags);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_selfpowered() - This API is invoked to specify whether the device
+ *				is self powered or not
+ * @gadget:	Reference to the gadget driver
+ * @value:	Specifies self powered or not
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_selfpowered(struct usb_gadget *gadget, int value)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	if (value)
+		pch_udc_set_selfpowered(dev);
+	else
+		pch_udc_clear_selfpowered(dev);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_pullup() - This API is invoked to make the device
+ *				visible/invisible to the host
+ * @gadget:	Reference to the gadget driver
+ * @is_on:	Specifies whether the pull up is made active or inactive
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_pullup(struct usb_gadget *gadget, int is_on)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	pch_udc_vbus_session(dev, is_on);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_vbus_session() - This API is used by a driver for an external
+ *				transceiver (or GPIO) that
+ *				detects a VBUS power session starting/ending
+ * @gadget:	Reference to the gadget driver
+ * @is_active:	specifies whether the session is starting or ending
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:	If the gadget passed is NULL
+ */
+static int pch_udc_pcd_vbus_session(struct usb_gadget *gadget, int is_active)
+{
+	struct pch_udc_dev	*dev;
+
+	if (!gadget)
+		return -EINVAL;
+	dev = container_of(gadget, struct pch_udc_dev, gadget);
+	pch_udc_vbus_session(dev, is_active);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_vbus_draw() - This API is used by gadget drivers during
+ *				SET_CONFIGURATION calls to
+ *				specify how much power the device can consume
+ * @gadget:	Reference to the gadget driver
+ * @mA:		specifies the current limit in 2mA unit
+ *
+ * Return codes:
+ *	-EINVAL:	If the gadget passed is NULL
+ *	-EOPNOTSUPP:
+ */
+static int pch_udc_pcd_vbus_draw(struct usb_gadget *gadget, unsigned int mA)
+{
+	return -EOPNOTSUPP;
+}
+
+static const struct usb_gadget_ops pch_udc_ops = {
+	.get_frame = pch_udc_pcd_get_frame,
+	.wakeup = pch_udc_pcd_wakeup,
+	.set_selfpowered = pch_udc_pcd_selfpowered,
+	.pullup = pch_udc_pcd_pullup,
+	.vbus_session = pch_udc_pcd_vbus_session,
+	.vbus_draw = pch_udc_pcd_vbus_draw,
+};
+
+/**
+ * complete_req() - This API is invoked from the driver when processing
+ *			of a request is complete
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request structure
+ * @status:	Indicates the success/failure of completion
+ */
+static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
+								 int status)
+{
+	struct pch_udc_dev	*dev;
+	unsigned halted = ep->halted;
+
+	list_del_init(&req->queue);
+
+	/* set new status if pending */
+	if (req->req.status == -EINPROGRESS)
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	dev = ep->dev;
+	if (req->dma_mapped) {
+		if (ep->in)
+			pci_unmap_single(dev->pdev, req->req.dma,
+					 req->req.length, PCI_DMA_TODEVICE);
+		else
+			pci_unmap_single(dev->pdev, req->req.dma,
+					 req->req.length, PCI_DMA_FROMDEVICE);
+		req->dma_mapped = 0;
+		req->req.dma = DMA_ADDR_INVALID;
+	}
+	ep->halted = 1;
+	spin_unlock(&dev->lock);
+	if (!ep->in)
+		pch_udc_ep_clear_rrdy(ep);
+	req->req.complete(&ep->ep, &req->req);
+	spin_lock(&dev->lock);
+	ep->halted = halted;
+}
+
+/**
+ * empty_req_queue() - This API empties the request queue of an endpoint
+ * @ep:		Reference to the endpoint structure
+ */
+static void empty_req_queue(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request	*req;
+
+	ep->halted = 1;
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+		complete_req(ep, req, -ESHUTDOWN);	/* Remove from list */
+	}
+}
+
+/**
+ * pch_udc_free_dma_chain() - This function frees the DMA chain created
+ *				for the request
+ * @dev		Reference to the driver structure
+ * @req		Reference to the request to be freed
+ *
+ * Return codes:
+ *	0: Success
+ */
+static void pch_udc_free_dma_chain(struct pch_udc_dev *dev,
+				   struct pch_udc_request *req)
+{
+	struct pch_udc_data_dma_desc *td = req->td_data;
+	unsigned i = req->chain_len;
+
+	for (; i > 1; --i) {
+		dma_addr_t addr = (dma_addr_t)td->next;
+		/* do not free first desc., will be done by free for request */
+		td = phys_to_virt(addr);
+		pci_pool_free(dev->data_requests, td, addr);
+	}
+}
+
+/**
+ * pch_udc_create_dma_chain() - This function creates or reinitializes
+ *				a DMA chain
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ * @buf_len:	The buffer length
+ * @gfp_flags:	Flags to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:		success,
+ *	-ENOMEM:	pci_pool_alloc invocation fails
+ */
+static int pch_udc_create_dma_chain(struct pch_udc_ep *ep,
+				    struct pch_udc_request *req,
+				    unsigned long buf_len,
+				    gfp_t gfp_flags)
+{
+	struct pch_udc_data_dma_desc *td = req->td_data, *last;
+	unsigned long bytes = req->req.length, i = 0;
+	dma_addr_t dma_addr;
+	unsigned len = 1;
+
+	if (req->chain_len > 1)
+		pch_udc_free_dma_chain(ep->dev, req);
+
+	for (; ; bytes -= buf_len, ++len) {
+		if (ep->in)
+			td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes);
+		else
+			td->status = PCH_UDC_BS_HST_BSY;
+
+		if (bytes <= buf_len)
+			break;
+
+		last = td;
+		td = pci_pool_alloc(ep->dev->data_requests, gfp_flags,
+				    &dma_addr);
+		if (!td)
+			goto nomem;
+
+		i += buf_len;
+		td->dataptr = req->req.dma + i;
+		last->next = dma_addr;
+	}
+
+	req->td_data_last = td;
+	td->status |= PCH_UDC_DMA_LAST;
+	td->next = req->td_data_phys;
+	req->chain_len = len;
+	return 0;
+
+nomem:
+	if (len > 1) {
+		req->chain_len = len;
+		pch_udc_free_dma_chain(ep->dev, req);
+	}
+	req->chain_len = 1;
+	return -ENOMEM;
+}
+
+/**
+ * prepare_dma() - This function creates and initializes the DMA chain
+ *			for the request
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ * @gfp:	Flag to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:		Success
+ *	Other 0:	linux error number on failure
+ */
+static int prepare_dma(struct pch_udc_ep *ep, struct pch_udc_request *req,
+			  gfp_t gfp)
+{
+	int	retval;
+
+	req->td_data->dataptr = req->req.dma;
+	req->td_data->status |= PCH_UDC_DMA_LAST;
+	/* Allocate and create a DMA chain */
+	retval = pch_udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp);
+	if (retval) {
+		pr_err("%s: could not create DMA chain: %d\n",
+		       __func__, retval);
+		return retval;
+	}
+	if (!ep->in)
+		return 0;
+	if (req->req.length <= ep->ep.maxpacket)
+		req->td_data->status = PCH_UDC_DMA_LAST | PCH_UDC_BS_HST_BSY |
+				       req->req.length;
+	/* if bytes < max packet then tx bytes must
+	 * be written in packet per buffer mode
+	 */
+	if ((req->req.length < ep->ep.maxpacket) || !ep->num)
+		req->td_data->status = (req->td_data->status &
+					~PCH_UDC_RXTX_BYTES) | req->req.length;
+	req->td_data->status = (req->td_data->status &
+				~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_BSY;
+	return 0;
+}
+
+/**
+ * process_zlp() - This function process zero length packets
+ *			from the gadget driver
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request
+ */
+static void process_zlp(struct pch_udc_ep *ep, struct pch_udc_request *req)
+{
+	struct pch_udc_dev	*dev = ep->dev;
+
+	/* IN zlp's are handled by hardware */
+	complete_req(ep, req, 0);
+
+	/* if set_config or set_intf is waiting for ack by zlp
+	 * then set CSR_DONE
+	 */
+	if (dev->set_cfg_not_acked) {
+		pch_udc_set_csr_done(dev);
+		dev->set_cfg_not_acked = 0;
+	}
+	/* setup command is ACK'ed now by zlp */
+	if (!dev->stall && dev->waiting_zlp_ack) {
+		pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
+		dev->waiting_zlp_ack = 0;
+	}
+}
+
+/**
+ * pch_udc_start_rxrequest() - This function starts the receive requirement.
+ * @ep:		Reference to the endpoint structure
+ * @req:	Reference to the request structure
+ */
+static void pch_udc_start_rxrequest(struct pch_udc_ep *ep,
+					 struct pch_udc_request *req)
+{
+	struct pch_udc_data_dma_desc *td_data;
+
+	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+	td_data = req->td_data;
+	ep->td_data = req->td_data;
+	/* Set the status bits for all descriptors */
+	while (1) {
+		td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
+				    PCH_UDC_BS_HST_RDY;
+		if ((td_data->status & PCH_UDC_DMA_LAST) ==  PCH_UDC_DMA_LAST)
+			break;
+		td_data = phys_to_virt(td_data->next);
+	}
+	/* Write the descriptor pointer */
+	pch_udc_ep_set_ddptr(ep, req->td_data_phys);
+	req->dma_going = 1;
+	pch_udc_enable_ep_interrupts(ep->dev, UDC_EPINT_OUT_EP0 << ep->num);
+	pch_udc_set_dma(ep->dev, DMA_DIR_RX);
+	pch_udc_ep_clear_nak(ep);
+	pch_udc_ep_set_rrdy(ep);
+}
+
+/**
+ * pch_udc_pcd_ep_enable() - This API enables the endpoint. It is called
+ *				from gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @desc:	Reference to the USB endpoint descriptor structure
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:
+ *	-ESHUTDOWN:
+ */
+static int pch_udc_pcd_ep_enable(struct usb_ep *usbep,
+				    const struct usb_endpoint_descriptor *desc)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	unsigned long		iflags;
+
+	if (!usbep || (usbep->name == ep0_string) || !desc ||
+	    (desc->bDescriptorType != USB_DT_ENDPOINT) || !desc->wMaxPacketSize)
+		return -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&dev->lock, iflags);
+	ep->desc = desc;
+	ep->halted = 0;
+	pch_udc_ep_enable(ep, &ep->dev->cfg_data, desc);
+	ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	spin_unlock_irqrestore(&dev->lock, iflags);
+	return 0;
+}
+
+/**
+ * pch_udc_pcd_ep_disable() - This API disables endpoint and is called
+ *				from gadget driver
+ * @usbep	Reference to the USB endpoint structure
+ *
+ * Return codes:
+ *	0:		Success
+ *	-EINVAL:
+ */
+static int pch_udc_pcd_ep_disable(struct usb_ep *usbep)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	unsigned long	iflags;
+
+	if (!usbep)
+		return -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if ((usbep->name == ep0_string) || !ep->desc)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ep->dev->lock, iflags);
+	empty_req_queue(ep);
+	ep->halted = 1;
+	pch_udc_ep_disable(ep);
+	pch_udc_disable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	ep->desc = NULL;
+	INIT_LIST_HEAD(&ep->queue);
+	spin_unlock_irqrestore(&ep->dev->lock, iflags);
+	return 0;
+}
+
+/**
+ * pch_udc_alloc_request() - This function allocates request structure.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @gfp:	Flag to be used while allocating memory
+ *
+ * Return codes:
+ *	NULL:			Failure
+ *	Allocated address:	Success
+ */
+static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep,
+						  gfp_t gfp)
+{
+	struct pch_udc_request		*req;
+	struct pch_udc_ep		*ep;
+	struct pch_udc_data_dma_desc	*dma_desc;
+	struct pch_udc_dev		*dev;
+
+	if (!usbep)
+		return NULL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	req = kzalloc(sizeof *req, gfp);
+	if (!req)
+		return NULL;
+	req->req.dma = DMA_ADDR_INVALID;
+	INIT_LIST_HEAD(&req->queue);
+	if (!ep->dev->dma_addr)
+		return &req->req;
+	/* ep0 in requests are allocated from data pool here */
+	dma_desc = pci_pool_alloc(ep->dev->data_requests, gfp,
+				  &req->td_data_phys);
+	if (NULL == dma_desc) {
+		kfree(req);
+		return NULL;
+	}
+	/* prevent from using desc. - set HOST BUSY */
+	dma_desc->status |= PCH_UDC_BS_HST_BSY;
+	dma_desc->dataptr = __constant_cpu_to_le32(DMA_ADDR_INVALID);
+	req->td_data = dma_desc;
+	req->td_data_last = dma_desc;
+	req->chain_len = 1;
+	return &req->req;
+}
+
+/**
+ * pch_udc_free_request() - This function frees request structure.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ */
+static void pch_udc_free_request(struct usb_ep *usbep,
+				  struct usb_request *usbreq)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_request	*req;
+	struct pch_udc_dev	*dev;
+
+	if (!usbep || !usbreq)
+		return;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	req = container_of(usbreq, struct pch_udc_request, req);
+	dev = ep->dev;
+	if (!list_empty(&req->queue))
+		dev_err(&dev->pdev->dev, "%s: %s req=0x%p queue not empty\n",
+			__func__, usbep->name, req);
+	if (req->td_data != NULL) {
+		if (req->chain_len > 1)
+			pch_udc_free_dma_chain(ep->dev, req);
+		pci_pool_free(ep->dev->data_requests, req->td_data,
+			      req->td_data_phys);
+	}
+	kfree(req);
+}
+
+/**
+ * pch_udc_pcd_queue() - This function queues a request packet. It is called
+ *			by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ * @gfp:	Flag to be used while mapping the data buffer
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq,
+								 gfp_t gfp)
+{
+	int retval = 0;
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	struct pch_udc_request	*req;
+	unsigned long	iflags;
+
+	if (!usbep || !usbreq || !usbreq->complete || !usbreq->buf)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!ep->desc && ep->num)
+		return -EINVAL;
+	req = container_of(usbreq, struct pch_udc_request, req);
+	if (!list_empty(&req->queue))
+		return -EINVAL;
+	if (!dev->driver || (dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&ep->dev->lock, iflags);
+	/* map the buffer for dma */
+	if (usbreq->length &&
+	    ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) {
+		if (ep->in)
+			usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
+					usbreq->length, PCI_DMA_TODEVICE);
+		else
+			usbreq->dma = pci_map_single(dev->pdev, usbreq->buf,
+					usbreq->length, PCI_DMA_FROMDEVICE);
+		req->dma_mapped = 1;
+	}
+	if (usbreq->length > 0) {
+		retval = prepare_dma(ep, req, gfp);
+		if (retval)
+			goto probe_end;
+	}
+	usbreq->actual = 0;
+	usbreq->status = -EINPROGRESS;
+	req->dma_done = 0;
+	if (list_empty(&ep->queue) && !ep->halted) {
+		/* no pending transfer, so start this req */
+		if (!usbreq->length) {
+			process_zlp(ep, req);
+			retval = 0;
+			goto probe_end;
+		}
+		if (!ep->in) {
+			pch_udc_start_rxrequest(ep, req);
+		} else {
+			/*
+			* For IN trfr the descriptors will be programmed and
+			* P bit will be set when
+			* we get an IN token
+			*/
+			pch_udc_wait_ep_stall(ep);
+			pch_udc_ep_clear_nak(ep);
+			pch_udc_enable_ep_interrupts(ep->dev, (1 << ep->num));
+			pch_udc_set_dma(dev, DMA_DIR_TX);
+		}
+	}
+	/* Now add this request to the ep's pending requests */
+	if (req != NULL)
+		list_add_tail(&req->queue, &ep->queue);
+
+probe_end:
+	spin_unlock_irqrestore(&dev->lock, iflags);
+	return retval;
+}
+
+/**
+ * pch_udc_pcd_dequeue() - This function de-queues a request packet.
+ *				It is called by gadget driver
+ * @usbep:	Reference to the USB endpoint structure
+ * @usbreq:	Reference to the USB request
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_dequeue(struct usb_ep *usbep,
+				struct usb_request *usbreq)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_request	*req;
+	struct pch_udc_dev	*dev;
+	unsigned long		flags;
+	int ret = -EINVAL;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!usbep || !usbreq || (!ep->desc && ep->num))
+		return ret;
+	req = container_of(usbreq, struct pch_udc_request, req);
+	spin_lock_irqsave(&ep->dev->lock, flags);
+	/* make sure it's still queued on this endpoint */
+	list_for_each_entry(req, &ep->queue, queue) {
+		if (&req->req == usbreq) {
+			pch_udc_ep_set_nak(ep);
+			if (!list_empty(&req->queue))
+				complete_req(ep, req, -ECONNRESET);
+			ret = 0;
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&ep->dev->lock, flags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_set_halt() - This function Sets or clear the endpoint halt
+ *			    feature
+ * @usbep:	Reference to the USB endpoint structure
+ * @halt:	Specifies whether to set or clear the feature
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	unsigned long iflags;
+	int ret;
+
+	if (!usbep)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!ep->desc && !ep->num)
+		return -EINVAL;
+	if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&udc_stall_spinlock, iflags);
+	if (list_empty(&ep->queue)) {
+		if (halt) {
+			if (ep->num == PCH_UDC_EP0)
+				ep->dev->stall = 1;
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						     PCH_UDC_EPINT(ep->in,
+								   ep->num));
+		} else {
+			pch_udc_ep_clear_stall(ep);
+		}
+		ret = 0;
+	} else {
+		ret = -EAGAIN;
+	}
+	spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_set_wedge() - This function Sets or clear the endpoint
+ *				halt feature
+ * @usbep:	Reference to the USB endpoint structure
+ * @halt:	Specifies whether to set or clear the feature
+ *
+ * Return codes:
+ *	0:			Success
+ *	linux error number:	Failure
+ */
+static int pch_udc_pcd_set_wedge(struct usb_ep *usbep)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_dev	*dev;
+	unsigned long iflags;
+	int ret;
+
+	if (!usbep)
+		return -EINVAL;
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	dev = ep->dev;
+	if (!ep->desc && !ep->num)
+		return -EINVAL;
+	if (!ep->dev->driver || (ep->dev->gadget.speed == USB_SPEED_UNKNOWN))
+		return -ESHUTDOWN;
+	spin_lock_irqsave(&udc_stall_spinlock, iflags);
+	if (!list_empty(&ep->queue)) {
+		ret = -EAGAIN;
+	} else {
+		if (ep->num == PCH_UDC_EP0)
+			ep->dev->stall = 1;
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+		ep->dev->prot_stall = 1;
+		ret = 0;
+	}
+	spin_unlock_irqrestore(&udc_stall_spinlock, iflags);
+	return ret;
+}
+
+/**
+ * pch_udc_pcd_fifo_flush() - This function Flush the FIFO of specified endpoint
+ * @usbep:	Reference to the USB endpoint structure
+ */
+static void pch_udc_pcd_fifo_flush(struct usb_ep *usbep)
+{
+	struct pch_udc_ep  *ep;
+
+	if (!usbep)
+		return;
+
+	ep = container_of(usbep, struct pch_udc_ep, ep);
+	if (ep->desc || !ep->num)
+		pch_udc_ep_fifo_flush(ep, ep->in);
+}
+
+static const struct usb_ep_ops pch_udc_ep_ops = {
+	.enable		= pch_udc_pcd_ep_enable,
+	.disable	= pch_udc_pcd_ep_disable,
+	.alloc_request	= pch_udc_alloc_request,
+	.free_request	= pch_udc_free_request,
+	.queue		= pch_udc_pcd_queue,
+	.dequeue	= pch_udc_pcd_dequeue,
+	.set_halt	= pch_udc_pcd_set_halt,
+	.set_wedge	= pch_udc_pcd_set_wedge,
+	.fifo_status	= NULL,
+	.fifo_flush	= pch_udc_pcd_fifo_flush,
+};
+
+/**
+ * pch_udc_init_setup_buff() - This function initializes the SETUP buffer
+ * @td_stp:	Reference to the SETP buffer structure
+ */
+static void pch_udc_init_setup_buff(struct pch_udc_stp_dma_desc *td_stp)
+{
+	static u32	pky_marker;
+
+	if (!td_stp)
+		return;
+	td_stp->reserved = ++pky_marker;
+	memset(&td_stp->request, 0xFF, sizeof td_stp->request);
+	td_stp->status = PCH_UDC_BS_HST_RDY;
+}
+
+/**
+ * pch_udc_start_next_txrequest() - This function starts
+ *					the next transmission requirement
+ * @ep:	Reference to the endpoint structure
+ */
+static void pch_udc_start_next_txrequest(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_data_dma_desc *td_data;
+
+	if (pch_udc_read_ep_control(ep) & UDC_EPCTL_P)
+		return;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	/* next request */
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	if (req->dma_going)
+		return;
+	if (!req->td_data)
+		return;
+	pch_udc_wait_ep_stall(ep);
+	req->dma_going = 1;
+	pch_udc_ep_set_ddptr(ep, 0);
+	td_data = req->td_data;
+	while (1) {
+		td_data->status = (td_data->status & ~PCH_UDC_BUFF_STS) |
+				   PCH_UDC_BS_HST_RDY;
+		if ((td_data->status & PCH_UDC_DMA_LAST) == PCH_UDC_DMA_LAST)
+			break;
+		td_data = phys_to_virt(td_data->next);
+	}
+	pch_udc_ep_set_ddptr(ep, req->td_data_phys);
+	pch_udc_set_dma(ep->dev, DMA_DIR_TX);
+	pch_udc_ep_set_pd(ep);
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	pch_udc_ep_clear_nak(ep);
+}
+
+/**
+ * pch_udc_complete_transfer() - This function completes a transfer
+ * @ep:		Reference to the endpoint structure
+ */
+static void pch_udc_complete_transfer(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_dev *dev = ep->dev;
+
+	if (list_empty(&ep->queue))
+		return;
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+	    PCH_UDC_BS_DMA_DONE)
+		return;
+	if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
+	     PCH_UDC_RTS_SUCC) {
+		dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
+			"epstatus=0x%08x\n",
+		       (req->td_data_last->status & PCH_UDC_RXTX_STS),
+		       (int)(ep->epsts));
+		return;
+	}
+
+	req->req.actual = req->req.length;
+	req->td_data_last->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
+	req->td_data->status = PCH_UDC_BS_HST_BSY | PCH_UDC_DMA_LAST;
+	complete_req(ep, req, 0);
+	req->dma_going = 0;
+	if (!list_empty(&ep->queue)) {
+		pch_udc_wait_ep_stall(ep);
+		pch_udc_ep_clear_nak(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	} else {
+		pch_udc_disable_ep_interrupts(ep->dev,
+					      PCH_UDC_EPINT(ep->in, ep->num));
+	}
+}
+
+/**
+ * pch_udc_complete_receiver() - This function completes a receiver
+ * @ep:		Reference to the endpoint structure
+ */
+static void pch_udc_complete_receiver(struct pch_udc_ep *ep)
+{
+	struct pch_udc_request *req;
+	struct pch_udc_dev *dev = ep->dev;
+	unsigned int count;
+
+	if (list_empty(&ep->queue))
+		return;
+
+	/* next request */
+	req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+	if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+	    PCH_UDC_BS_DMA_DONE)
+		return;
+	pch_udc_clear_dma(ep->dev, DMA_DIR_RX);
+	if ((req->td_data_last->status & PCH_UDC_RXTX_STS) !=
+	    PCH_UDC_RTS_SUCC) {
+		dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) "
+			"epstatus=0x%08x\n",
+			(req->td_data_last->status & PCH_UDC_RXTX_STS),
+			(int)(ep->epsts));
+		return;
+	}
+	count = req->td_data_last->status & PCH_UDC_RXTX_BYTES;
+
+	/* on 64k packets the RXBYTES field is zero */
+	if (!count && (req->req.length == UDC_DMA_MAXPACKET))
+		count = UDC_DMA_MAXPACKET;
+	req->td_data->status |= PCH_UDC_DMA_LAST;
+	req->td_data_last->status |= PCH_UDC_BS_HST_BSY;
+
+	req->dma_going = 0;
+	req->req.actual = count;
+	complete_req(ep, req, 0);
+	/* If there is a new/failed requests try that now */
+	if (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+		pch_udc_start_rxrequest(ep, req);
+	}
+}
+
+/**
+ * pch_udc_svc_data_in() - This function process endpoint interrupts
+ *				for IN endpoints
+ * @dev:	Reference to the device structure
+ * @ep_num:	Endpoint that generated the interrupt
+ */
+static void pch_udc_svc_data_in(struct pch_udc_dev *dev, int ep_num)
+{
+	u32	epsts;
+	struct pch_udc_ep	*ep;
+
+	ep = &dev->ep[2*ep_num];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA  | UDC_EPSTS_HE |
+		       UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
+		       UDC_EPSTS_RSS | UDC_EPSTS_XFERDONE)))
+		return;
+	if ((epsts & UDC_EPSTS_BNA))
+		return;
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if (epsts & UDC_EPSTS_RSS) {
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	}
+	if (epsts & UDC_EPSTS_RCS) {
+		if (!dev->prot_stall) {
+			pch_udc_ep_clear_stall(ep);
+		} else {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		}
+	}
+	if (epsts & UDC_EPSTS_TDC)
+		pch_udc_complete_transfer(ep);
+	/* On IN interrupt, provide data if we have any */
+	if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_RSS) &&
+	    !(epsts & UDC_EPSTS_TDC) && !(epsts & UDC_EPSTS_TXEMPTY))
+		pch_udc_start_next_txrequest(ep);
+}
+
+/**
+ * pch_udc_svc_data_out() - Handles interrupts from OUT endpoint
+ * @dev:	Reference to the device structure
+ * @ep_num:	Endpoint that generated the interrupt
+ */
+static void pch_udc_svc_data_out(struct pch_udc_dev *dev, int ep_num)
+{
+	u32			epsts;
+	struct pch_udc_ep		*ep;
+	struct pch_udc_request		*req = NULL;
+
+	ep = &dev->ep[2*ep_num + 1];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if ((epsts & UDC_EPSTS_BNA) && (!list_empty(&ep->queue))) {
+		/* next request */
+		req = list_entry(ep->queue.next, struct pch_udc_request,
+				 queue);
+		if ((req->td_data_last->status & PCH_UDC_BUFF_STS) !=
+		     PCH_UDC_BS_DMA_DONE) {
+			if (!req->dma_going)
+				pch_udc_start_rxrequest(ep, req);
+			return;
+		}
+	}
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if (epsts & UDC_EPSTS_RSS)
+		pch_udc_ep_set_stall(ep);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+	if (epsts & UDC_EPSTS_RCS) {
+		if (!dev->prot_stall) {
+			pch_udc_ep_clear_stall(ep);
+		} else {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		}
+	}
+	if (((epsts & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+	    UDC_EPSTS_OUT_DATA) {
+		if (ep->dev->prot_stall == 1) {
+			pch_udc_ep_set_stall(ep);
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+		} else {
+			pch_udc_complete_receiver(ep);
+		}
+	}
+	if (list_empty(&ep->queue))
+		pch_udc_set_dma(dev, DMA_DIR_RX);
+}
+
+/**
+ * pch_udc_svc_control_in() - Handle Control IN endpoint interrupts
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_svc_control_in(struct pch_udc_dev *dev)
+{
+	u32	epsts;
+	struct pch_udc_ep	*ep;
+
+	ep = &dev->ep[UDC_EP0IN_IDX];
+	epsts = ep->epsts;
+	ep->epsts = 0;
+
+	if (!(epsts & (UDC_EPSTS_IN | UDC_EPSTS_BNA | UDC_EPSTS_HE |
+		       UDC_EPSTS_TDC | UDC_EPSTS_RCS | UDC_EPSTS_TXEMPTY |
+		       UDC_EPSTS_XFERDONE)))
+		return;
+	if ((epsts & UDC_EPSTS_BNA))
+		return;
+	if (epsts & UDC_EPSTS_HE)
+		return;
+	if ((epsts & UDC_EPSTS_TDC) && (!dev->stall))
+		pch_udc_complete_transfer(ep);
+	/* On IN interrupt, provide data if we have any */
+	if ((epsts & UDC_EPSTS_IN) && !(epsts & UDC_EPSTS_TDC) &&
+	     !(epsts & UDC_EPSTS_TXEMPTY))
+		pch_udc_start_next_txrequest(ep);
+}
+
+/**
+ * pch_udc_svc_control_out() - Routine that handle Control
+ *					OUT endpoint interrupts
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
+{
+	u32	stat;
+	int setup_supported;
+	struct pch_udc_ep	*ep;
+
+	ep = &dev->ep[UDC_EP0OUT_IDX];
+	stat = ep->epsts;
+	ep->epsts = 0;
+
+	/* If setup data */
+	if (((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+	    UDC_EPSTS_OUT_SETUP) {
+		dev->stall = 0;
+		dev->ep[UDC_EP0IN_IDX].halted = 0;
+		dev->ep[UDC_EP0OUT_IDX].halted = 0;
+		/* In data not ready */
+		pch_udc_ep_set_nak(&(dev->ep[UDC_EP0IN_IDX]));
+		dev->setup_data = ep->td_stp->request;
+		pch_udc_init_setup_buff(ep->td_stp);
+		pch_udc_clear_dma(dev, DMA_DIR_TX);
+		pch_udc_ep_fifo_flush(&(dev->ep[UDC_EP0IN_IDX]),
+				      dev->ep[UDC_EP0IN_IDX].in);
+		if ((dev->setup_data.bRequestType & USB_DIR_IN))
+			dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
+		else /* OUT */
+			dev->gadget.ep0 = &ep->ep;
+		spin_unlock(&dev->lock);
+		/* If Mass storage Reset */
+		if ((dev->setup_data.bRequestType == 0x21) &&
+		    (dev->setup_data.bRequest == 0xFF))
+			dev->prot_stall = 0;
+		/* call gadget with setup data received */
+		setup_supported = dev->driver->setup(&dev->gadget,
+						     &dev->setup_data);
+		spin_lock(&dev->lock);
+		/* ep0 in returns data on IN phase */
+		if (setup_supported >= 0 && setup_supported <
+					    UDC_EP0IN_MAX_PKT_SIZE) {
+			pch_udc_ep_clear_nak(&(dev->ep[UDC_EP0IN_IDX]));
+			/* Gadget would have queued a request when
+			 * we called the setup */
+			pch_udc_set_dma(dev, DMA_DIR_RX);
+			pch_udc_ep_clear_nak(ep);
+		} else if (setup_supported < 0) {
+			/* if unsupported request, then stall */
+			pch_udc_ep_set_stall(&(dev->ep[UDC_EP0IN_IDX]));
+			pch_udc_enable_ep_interrupts(ep->dev,
+						PCH_UDC_EPINT(ep->in, ep->num));
+			dev->stall = 0;
+			pch_udc_set_dma(dev, DMA_DIR_RX);
+		} else {
+			dev->waiting_zlp_ack = 1;
+		}
+	} else if ((((stat & UDC_EPSTS_OUT_MASK) >> UDC_EPSTS_OUT_SHIFT) ==
+		     UDC_EPSTS_OUT_DATA) && !dev->stall) {
+		if (list_empty(&ep->queue)) {
+			dev_err(&dev->pdev->dev, "%s: No request\n", __func__);
+			ep->td_data->status = (ep->td_data->status &
+					       ~PCH_UDC_BUFF_STS) |
+					       PCH_UDC_BS_HST_RDY;
+			pch_udc_set_dma(dev, DMA_DIR_RX);
+		} else {
+			/* control write */
+			/* next function will pickuo an clear the status */
+			ep->epsts = stat;
+
+			pch_udc_svc_data_out(dev, 0);
+			/* re-program desc. pointer for possible ZLPs */
+			pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+			pch_udc_set_dma(dev, DMA_DIR_RX);
+		}
+	}
+	pch_udc_ep_set_rrdy(ep);
+}
+
+
+/**
+ * pch_udc_postsvc_epinters() - This function enables end point interrupts
+ *				and clears NAK status
+ * @dev:	Reference to the device structure
+ * @ep_num:	End point number
+ */
+static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
+{
+	struct pch_udc_ep	*ep;
+	struct pch_udc_request *req;
+
+	ep = &dev->ep[2*ep_num];
+	if (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
+		pch_udc_enable_ep_interrupts(ep->dev,
+					     PCH_UDC_EPINT(ep->in, ep->num));
+		pch_udc_ep_clear_nak(ep);
+	}
+}
+
+/**
+ * pch_udc_read_all_epstatus() - This function read all endpoint status
+ * @dev:	Reference to the device structure
+ * @ep_intr:	Status of endpoint interrupt
+ */
+static void pch_udc_read_all_epstatus(struct pch_udc_dev *dev, u32 ep_intr)
+{
+	int i;
+	struct pch_udc_ep	*ep;
+
+	for (i = 0; i < PCH_UDC_USED_EP_NUM; i++) {
+		/* IN */
+		if (ep_intr & (0x1 << i)) {
+			ep = &dev->ep[2*i];
+			ep->epsts = pch_udc_read_ep_status(ep);
+			pch_udc_clear_ep_status(ep, ep->epsts);
+		}
+		/* OUT */
+		if (ep_intr & (0x10000 << i)) {
+			ep = &dev->ep[2*i+1];
+			ep->epsts = pch_udc_read_ep_status(ep);
+			pch_udc_clear_ep_status(ep, ep->epsts);
+		}
+	}
+}
+
+/**
+ * pch_udc_activate_control_ep() - This function enables the control endpoints
+ *					for traffic after a reset
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_activate_control_ep(struct pch_udc_dev *dev)
+{
+	struct pch_udc_ep	*ep;
+	u32 val;
+
+	/* Setup the IN endpoint */
+	ep = &dev->ep[UDC_EP0IN_IDX];
+	pch_udc_clear_ep_control(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	pch_udc_ep_set_bufsz(ep, UDC_EP0IN_BUFF_SIZE, ep->in);
+	pch_udc_ep_set_maxpkt(ep, UDC_EP0IN_MAX_PKT_SIZE);
+	/* Initialize the IN EP Descriptor */
+	ep->td_data      = NULL;
+	ep->td_stp       = NULL;
+	ep->td_data_phys = 0;
+	ep->td_stp_phys  = 0;
+
+	/* Setup the OUT endpoint */
+	ep = &dev->ep[UDC_EP0OUT_IDX];
+	pch_udc_clear_ep_control(ep);
+	pch_udc_ep_fifo_flush(ep, ep->in);
+	pch_udc_ep_set_bufsz(ep, UDC_EP0OUT_BUFF_SIZE, ep->in);
+	pch_udc_ep_set_maxpkt(ep, UDC_EP0OUT_MAX_PKT_SIZE);
+	val = UDC_EP0OUT_MAX_PKT_SIZE << UDC_CSR_NE_MAX_PKT_SHIFT;
+	pch_udc_write_csr(ep->dev, val, UDC_EP0OUT_IDX);
+
+	/* Initialize the SETUP buffer */
+	pch_udc_init_setup_buff(ep->td_stp);
+	/* Write the pointer address of dma descriptor */
+	pch_udc_ep_set_subptr(ep, ep->td_stp_phys);
+	/* Write the pointer address of Setup descriptor */
+	pch_udc_ep_set_ddptr(ep, ep->td_data_phys);
+
+	/* Initialize the dma descriptor */
+	ep->td_data->status  = PCH_UDC_DMA_LAST;
+	ep->td_data->dataptr = dev->dma_addr;
+	ep->td_data->next    = ep->td_data_phys;
+
+	pch_udc_ep_clear_nak(ep);
+}
+
+
+/**
+ * pch_udc_svc_ur_interrupt() - This function handles a USB reset interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
+{
+	struct pch_udc_ep	*ep;
+	int i;
+
+	pch_udc_clear_dma(dev, DMA_DIR_TX);
+	pch_udc_clear_dma(dev, DMA_DIR_RX);
+	/* Mask all endpoint interrupts */
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+	/* clear all endpoint interrupts */
+	pch_udc_write_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	for (i = 0; i < PCH_UDC_EP_NUM; i++) {
+		ep = &dev->ep[i];
+		pch_udc_clear_ep_status(ep, UDC_EPSTS_ALL_CLR_MASK);
+		pch_udc_clear_ep_control(ep);
+		pch_udc_ep_set_ddptr(ep, 0);
+		pch_udc_write_csr(ep->dev, 0x00, i);
+	}
+	dev->stall = 0;
+	dev->prot_stall = 0;
+	dev->waiting_zlp_ack = 0;
+	dev->set_cfg_not_acked = 0;
+
+	/* disable ep to empty req queue. Skip the control EP's */
+	for (i = 0; i < (PCH_UDC_USED_EP_NUM*2); i++) {
+		ep = &dev->ep[i];
+		pch_udc_ep_set_nak(ep);
+		pch_udc_ep_fifo_flush(ep, ep->in);
+		/* Complete request queue */
+		empty_req_queue(ep);
+	}
+	if (dev->driver && dev->driver->disconnect)
+		dev->driver->disconnect(&dev->gadget);
+}
+
+/**
+ * pch_udc_svc_enum_interrupt() - This function handles a USB speed enumeration
+ *				done interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_enum_interrupt(struct pch_udc_dev *dev)
+{
+	u32 dev_stat, dev_speed;
+	u32 speed = USB_SPEED_FULL;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev_speed = (dev_stat & UDC_DEVSTS_ENUM_SPEED_MASK) >>
+						 UDC_DEVSTS_ENUM_SPEED_SHIFT;
+	switch (dev_speed) {
+	case UDC_DEVSTS_ENUM_SPEED_HIGH:
+		speed = USB_SPEED_HIGH;
+		break;
+	case  UDC_DEVSTS_ENUM_SPEED_FULL:
+		speed = USB_SPEED_FULL;
+		break;
+	case  UDC_DEVSTS_ENUM_SPEED_LOW:
+		speed = USB_SPEED_LOW;
+		break;
+	default:
+		BUG();
+	}
+	dev->gadget.speed = speed;
+	pch_udc_activate_control_ep(dev);
+	pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 | UDC_EPINT_OUT_EP0);
+	pch_udc_set_dma(dev, DMA_DIR_TX);
+	pch_udc_set_dma(dev, DMA_DIR_RX);
+	pch_udc_ep_set_rrdy(&(dev->ep[UDC_EP0OUT_IDX]));
+}
+
+/**
+ * pch_udc_svc_intf_interrupt() - This function handles a set interface
+ *				  interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
+{
+	u32 reg, dev_stat = 0;
+	int i, ret;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev->cfg_data.cur_intf = (dev_stat & UDC_DEVSTS_INTF_MASK) >>
+							 UDC_DEVSTS_INTF_SHIFT;
+	dev->cfg_data.cur_alt = (dev_stat & UDC_DEVSTS_ALT_MASK) >>
+							 UDC_DEVSTS_ALT_SHIFT;
+	dev->set_cfg_not_acked = 1;
+	/* Construct the usb request for gadget driver and inform it */
+	memset(&dev->setup_data, 0 , sizeof dev->setup_data);
+	dev->setup_data.bRequest = USB_REQ_SET_INTERFACE;
+	dev->setup_data.bRequestType = USB_RECIP_INTERFACE;
+	dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_alt);
+	dev->setup_data.wIndex = cpu_to_le16(dev->cfg_data.cur_intf);
+	/* programm the Endpoint Cfg registers */
+	/* Only one end point cfg register */
+	reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
+	reg = (reg & ~UDC_CSR_NE_INTF_MASK) |
+	      (dev->cfg_data.cur_intf << UDC_CSR_NE_INTF_SHIFT);
+	reg = (reg & ~UDC_CSR_NE_ALT_MASK) |
+	      (dev->cfg_data.cur_alt << UDC_CSR_NE_ALT_SHIFT);
+	pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
+	for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
+		/* clear stall bits */
+		pch_udc_ep_clear_stall(&(dev->ep[i]));
+		dev->ep[i].halted = 0;
+	}
+	dev->stall = 0;
+	spin_unlock(&dev->lock);
+	ret = dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
+}
+
+/**
+ * pch_udc_svc_cfg_interrupt() - This function handles a set configuration
+ *				interrupt
+ * @dev:	Reference to driver structure
+ */
+static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
+{
+	int i, ret;
+	u32 reg, dev_stat = 0;
+
+	dev_stat = pch_udc_read_device_status(dev);
+	dev->set_cfg_not_acked = 1;
+	dev->cfg_data.cur_cfg = (dev_stat & UDC_DEVSTS_CFG_MASK) >>
+				UDC_DEVSTS_CFG_SHIFT;
+	/* make usb request for gadget driver */
+	memset(&dev->setup_data, 0 , sizeof dev->setup_data);
+	dev->setup_data.bRequest = USB_REQ_SET_CONFIGURATION;
+	dev->setup_data.wValue = cpu_to_le16(dev->cfg_data.cur_cfg);
+	/* program the NE registers */
+	/* Only one end point cfg register */
+	reg = pch_udc_read_csr(dev, UDC_EP0OUT_IDX);
+	reg = (reg & ~UDC_CSR_NE_CFG_MASK) |
+	      (dev->cfg_data.cur_cfg << UDC_CSR_NE_CFG_SHIFT);
+	pch_udc_write_csr(dev, reg, UDC_EP0OUT_IDX);
+	for (i = 0; i < PCH_UDC_USED_EP_NUM * 2; i++) {
+		/* clear stall bits */
+		pch_udc_ep_clear_stall(&(dev->ep[i]));
+		dev->ep[i].halted = 0;
+	}
+	dev->stall = 0;
+
+	/* call gadget zero with setup data received */
+	spin_unlock(&dev->lock);
+	ret = dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
+}
+
+/**
+ * pch_udc_dev_isr() - This function services device interrupts
+ *			by invoking appropriate routines.
+ * @dev:	Reference to the device structure
+ * @dev_intr:	The Device interrupt status.
+ */
+static void pch_udc_dev_isr(struct pch_udc_dev *dev, u32 dev_intr)
+{
+	/* USB Reset Interrupt */
+	if (dev_intr & UDC_DEVINT_UR)
+		pch_udc_svc_ur_interrupt(dev);
+	/* Enumeration Done Interrupt */
+	if (dev_intr & UDC_DEVINT_ENUM)
+		pch_udc_svc_enum_interrupt(dev);
+	/* Set Interface Interrupt */
+	if (dev_intr & UDC_DEVINT_SI)
+		pch_udc_svc_intf_interrupt(dev);
+	/* Set Config Interrupt */
+	if (dev_intr & UDC_DEVINT_SC)
+		pch_udc_svc_cfg_interrupt(dev);
+	/* USB Suspend interrupt */
+	if (dev_intr & UDC_DEVINT_US)
+		dev_dbg(&dev->pdev->dev, "USB_SUSPEND\n");
+	/* Clear the SOF interrupt, if enabled */
+	if (dev_intr & UDC_DEVINT_SOF)
+		dev_dbg(&dev->pdev->dev, "SOF\n");
+	/* ES interrupt, IDLE > 3ms on the USB */
+	if (dev_intr & UDC_DEVINT_ES)
+		dev_dbg(&dev->pdev->dev, "ES\n");
+	/* RWKP interrupt */
+	if (dev_intr & UDC_DEVINT_RWKP)
+		dev_dbg(&dev->pdev->dev, "RWKP\n");
+}
+
+/**
+ * pch_udc_isr() - This function handles interrupts from the PCH USB Device
+ * @irq:	Interrupt request number
+ * @dev:	Reference to the device structure
+ */
+static irqreturn_t pch_udc_isr(int irq, void *pdev)
+{
+	struct pch_udc_dev *dev = (struct pch_udc_dev *) pdev;
+	u32 dev_intr, ep_intr;
+	int i;
+
+	dev_intr = pch_udc_read_device_interrupts(dev);
+	ep_intr = pch_udc_read_ep_interrupts(dev);
+
+	if (dev_intr)
+		/* Clear device interrupts */
+		pch_udc_write_device_interrupts(dev, dev_intr);
+	if (ep_intr)
+		/* Clear ep interrupts */
+		pch_udc_write_ep_interrupts(dev, ep_intr);
+	if (!dev_intr && !ep_intr)
+		return IRQ_NONE;
+	spin_lock(&dev->lock);
+	if (dev_intr)
+		pch_udc_dev_isr(dev, dev_intr);
+	if (ep_intr) {
+		pch_udc_read_all_epstatus(dev, ep_intr);
+		/* Process Control In interrupts, if present */
+		if (ep_intr & UDC_EPINT_IN_EP0) {
+			pch_udc_svc_control_in(dev);
+			pch_udc_postsvc_epinters(dev, 0);
+		}
+		/* Process Control Out interrupts, if present */
+		if (ep_intr & UDC_EPINT_OUT_EP0)
+			pch_udc_svc_control_out(dev);
+		/* Process data in end point interrupts */
+		for (i = 1; i < PCH_UDC_USED_EP_NUM; i++) {
+			if (ep_intr & (1 <<  i)) {
+				pch_udc_svc_data_in(dev, i);
+				pch_udc_postsvc_epinters(dev, i);
+			}
+		}
+		/* Process data out end point interrupts */
+		for (i = UDC_EPINT_OUT_SHIFT + 1; i < (UDC_EPINT_OUT_SHIFT +
+						 PCH_UDC_USED_EP_NUM); i++)
+			if (ep_intr & (1 <<  i))
+				pch_udc_svc_data_out(dev, i -
+							 UDC_EPINT_OUT_SHIFT);
+	}
+	spin_unlock(&dev->lock);
+	return IRQ_HANDLED;
+}
+
+/**
+ * pch_udc_setup_ep0() - This function enables control endpoint for traffic
+ * @dev:	Reference to the device structure
+ */
+static void pch_udc_setup_ep0(struct pch_udc_dev *dev)
+{
+	/* enable ep0 interrupts */
+	pch_udc_enable_ep_interrupts(dev, UDC_EPINT_IN_EP0 |
+						UDC_EPINT_OUT_EP0);
+	/* enable device interrupts */
+	pch_udc_enable_interrupts(dev, UDC_DEVINT_UR | UDC_DEVINT_US |
+				       UDC_DEVINT_ES | UDC_DEVINT_ENUM |
+				       UDC_DEVINT_SI | UDC_DEVINT_SC);
+}
+
+/**
+ * gadget_release() - Free the gadget driver private data
+ * @pdev	reference to struct pci_dev
+ */
+static void gadget_release(struct device *pdev)
+{
+	struct pch_udc_dev *dev = dev_get_drvdata(pdev);
+
+	kfree(dev);
+}
+
+/**
+ * pch_udc_pcd_reinit() - This API initializes the endpoint structures
+ * @dev:	Reference to the driver structure
+ */
+static void pch_udc_pcd_reinit(struct pch_udc_dev *dev)
+{
+	const char *const ep_string[] = {
+		ep0_string, "ep0out", "ep1in", "ep1out", "ep2in", "ep2out",
+		"ep3in", "ep3out", "ep4in", "ep4out", "ep5in", "ep5out",
+		"ep6in", "ep6out", "ep7in", "ep7out", "ep8in", "ep8out",
+		"ep9in", "ep9out", "ep10in", "ep10out", "ep11in", "ep11out",
+		"ep12in", "ep12out", "ep13in", "ep13out", "ep14in", "ep14out",
+		"ep15in", "ep15out",
+	};
+	int i;
+
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	INIT_LIST_HEAD(&dev->gadget.ep_list);
+
+	/* Initialize the endpoints structures */
+	memset(dev->ep, 0, sizeof dev->ep);
+	for (i = 0; i < PCH_UDC_EP_NUM; i++) {
+		struct pch_udc_ep *ep = &dev->ep[i];
+		ep->dev = dev;
+		ep->halted = 1;
+		ep->num = i / 2;
+		ep->in = ~i & 1;
+		ep->ep.name = ep_string[i];
+		ep->ep.ops = &pch_udc_ep_ops;
+		if (ep->in)
+			ep->offset_addr = ep->num * UDC_EP_REG_SHIFT;
+		else
+			ep->offset_addr = (UDC_EPINT_OUT_SHIFT + ep->num) *
+					  UDC_EP_REG_SHIFT;
+		/* need to set ep->ep.maxpacket and set Default Configuration?*/
+		ep->ep.maxpacket = UDC_BULK_MAX_PKT_SIZE;
+		list_add_tail(&ep->ep.ep_list, &dev->gadget.ep_list);
+		INIT_LIST_HEAD(&ep->queue);
+	}
+	dev->ep[UDC_EP0IN_IDX].ep.maxpacket = UDC_EP0IN_MAX_PKT_SIZE;
+	dev->ep[UDC_EP0OUT_IDX].ep.maxpacket = UDC_EP0OUT_MAX_PKT_SIZE;
+
+	dev->dma_addr = pci_map_single(dev->pdev, dev->ep0out_buf, 256,
+				  PCI_DMA_FROMDEVICE);
+
+	/* remove ep0 in and out from the list.  They have own pointer */
+	list_del_init(&dev->ep[UDC_EP0IN_IDX].ep.ep_list);
+	list_del_init(&dev->ep[UDC_EP0OUT_IDX].ep.ep_list);
+
+	dev->gadget.ep0 = &dev->ep[UDC_EP0IN_IDX].ep;
+	INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
+}
+
+/**
+ * pch_udc_pcd_init() - This API initializes the driver structure
+ * @dev:	Reference to the driver structure
+ *
+ * Return codes:
+ *	0: Success
+ */
+static int pch_udc_pcd_init(struct pch_udc_dev *dev)
+{
+	pch_udc_init(dev);
+	pch_udc_pcd_reinit(dev);
+	return 0;
+}
+
+/**
+ * init_dma_pools() - create dma pools during initialization
+ * @pdev:	reference to struct pci_dev
+ */
+static int init_dma_pools(struct pch_udc_dev *dev)
+{
+	struct pch_udc_stp_dma_desc	*td_stp;
+	struct pch_udc_data_dma_desc	*td_data;
+
+	/* DMA setup */
+	dev->data_requests = pci_pool_create("data_requests", dev->pdev,
+		sizeof(struct pch_udc_data_dma_desc), 0, 0);
+	if (!dev->data_requests) {
+		dev_err(&dev->pdev->dev, "%s: can't get request data pool\n",
+			__func__);
+		return -ENOMEM;
+	}
+
+	/* dma desc for setup data */
+	dev->stp_requests = pci_pool_create("setup requests", dev->pdev,
+		sizeof(struct pch_udc_stp_dma_desc), 0, 0);
+	if (!dev->stp_requests) {
+		dev_err(&dev->pdev->dev, "%s: can't get setup request pool\n",
+			__func__);
+		return -ENOMEM;
+	}
+	/* setup */
+	td_stp = pci_pool_alloc(dev->stp_requests, GFP_KERNEL,
+				&dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
+	if (!td_stp) {
+		dev_err(&dev->pdev->dev,
+			"%s: can't allocate setup dma descriptor\n", __func__);
+		return -ENOMEM;
+	}
+	dev->ep[UDC_EP0OUT_IDX].td_stp = td_stp;
+
+	/* data: 0 packets !? */
+	td_data = pci_pool_alloc(dev->data_requests, GFP_KERNEL,
+				&dev->ep[UDC_EP0OUT_IDX].td_data_phys);
+	if (!td_data) {
+		dev_err(&dev->pdev->dev,
+			"%s: can't allocate data dma descriptor\n", __func__);
+		return -ENOMEM;
+	}
+	dev->ep[UDC_EP0OUT_IDX].td_data = td_data;
+	dev->ep[UDC_EP0IN_IDX].td_stp = NULL;
+	dev->ep[UDC_EP0IN_IDX].td_stp_phys = 0;
+	dev->ep[UDC_EP0IN_IDX].td_data = NULL;
+	dev->ep[UDC_EP0IN_IDX].td_data_phys = 0;
+	return 0;
+}
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
+	int (*bind)(struct usb_gadget *))
+{
+	struct pch_udc_dev	*dev = pch_udc;
+	int			retval;
+
+	if (!driver || (driver->speed == USB_SPEED_UNKNOWN) || !bind ||
+	    !driver->setup || !driver->unbind || !driver->disconnect) {
+		dev_err(&dev->pdev->dev,
+			"%s: invalid driver parameter\n", __func__);
+		return -EINVAL;
+	}
+
+	if (!dev)
+		return -ENODEV;
+
+	if (dev->driver) {
+		dev_err(&dev->pdev->dev, "%s: already bound\n", __func__);
+		return -EBUSY;
+	}
+	driver->driver.bus = NULL;
+	dev->driver = driver;
+	dev->gadget.dev.driver = &driver->driver;
+
+	/* Invoke the bind routine of the gadget driver */
+	retval = bind(&dev->gadget);
+
+	if (retval) {
+		dev_err(&dev->pdev->dev, "%s: binding to %s returning %d\n",
+		       __func__, driver->driver.name, retval);
+		dev->driver = NULL;
+		dev->gadget.dev.driver = NULL;
+		return retval;
+	}
+	/* get ready for ep0 traffic */
+	pch_udc_setup_ep0(dev);
+
+	/* clear SD */
+	pch_udc_clear_disconnect(dev);
+
+	dev->connected = 1;
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct pch_udc_dev	*dev = pch_udc;
+
+	if (!dev)
+		return -ENODEV;
+
+	if (!driver || (driver != dev->driver)) {
+		dev_err(&dev->pdev->dev,
+			"%s: invalid driver parameter\n", __func__);
+		return -EINVAL;
+	}
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+
+	/* Assues that there are no pending requets with this driver */
+	driver->unbind(&dev->gadget);
+	dev->gadget.dev.driver = NULL;
+	dev->driver = NULL;
+	dev->connected = 0;
+
+	/* set SD */
+	pch_udc_set_disconnect(dev);
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+static void pch_udc_shutdown(struct pci_dev *pdev)
+{
+	struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	/* disable the pullup so the host will think we're gone */
+	pch_udc_set_disconnect(dev);
+}
+
+static void pch_udc_remove(struct pci_dev *pdev)
+{
+	struct pch_udc_dev	*dev = pci_get_drvdata(pdev);
+
+	/* gadget driver must not be registered */
+	if (dev->driver)
+		dev_err(&pdev->dev,
+			"%s: gadget driver still bound!!!\n", __func__);
+	/* dma pool cleanup */
+	if (dev->data_requests)
+		pci_pool_destroy(dev->data_requests);
+
+	if (dev->stp_requests) {
+		/* cleanup DMA desc's for ep0in */
+		if (dev->ep[UDC_EP0OUT_IDX].td_stp) {
+			pci_pool_free(dev->stp_requests,
+				dev->ep[UDC_EP0OUT_IDX].td_stp,
+				dev->ep[UDC_EP0OUT_IDX].td_stp_phys);
+		}
+		if (dev->ep[UDC_EP0OUT_IDX].td_data) {
+			pci_pool_free(dev->stp_requests,
+				dev->ep[UDC_EP0OUT_IDX].td_data,
+				dev->ep[UDC_EP0OUT_IDX].td_data_phys);
+		}
+		pci_pool_destroy(dev->stp_requests);
+	}
+
+	pch_udc_exit(dev);
+
+	if (dev->irq_registered)
+		free_irq(pdev->irq, dev);
+	if (dev->base_addr)
+		iounmap(dev->base_addr);
+	if (dev->mem_region)
+		release_mem_region(dev->phys_addr,
+				   pci_resource_len(pdev, PCH_UDC_PCI_BAR));
+	if (dev->active)
+		pci_disable_device(pdev);
+	if (dev->registered)
+		device_unregister(&dev->gadget.dev);
+	kfree(dev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int pch_udc_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct pch_udc_dev *dev = pci_get_drvdata(pdev);
+
+	pch_udc_disable_interrupts(dev, UDC_DEVINT_MSK);
+	pch_udc_disable_ep_interrupts(dev, UDC_EPINT_MSK_DISABLE_ALL);
+
+	pci_disable_device(pdev);
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+
+	if (pci_save_state(pdev)) {
+		dev_err(&pdev->dev,
+			"%s: could not save PCI config state\n", __func__);
+		return -ENOMEM;
+	}
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
+}
+
+static int pch_udc_resume(struct pci_dev *pdev)
+{
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	ret = pci_restore_state(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: pci_restore_state failed\n", __func__);
+		return ret;
+	}
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "%s: pci_enable_device failed\n", __func__);
+		return ret;
+	}
+	pci_enable_wake(pdev, PCI_D3hot, 0);
+	return 0;
+}
+#else
+#define pch_udc_suspend	NULL
+#define pch_udc_resume	NULL
+#endif /* CONFIG_PM */
+
+static int pch_udc_probe(struct pci_dev *pdev,
+			  const struct pci_device_id *id)
+{
+	unsigned long		resource;
+	unsigned long		len;
+	int			retval;
+	struct pch_udc_dev	*dev;
+
+	/* one udc only */
+	if (pch_udc) {
+		pr_err("%s: already probed\n", __func__);
+		return -EBUSY;
+	}
+	/* init */
+	dev = kzalloc(sizeof *dev, GFP_KERNEL);
+	if (!dev) {
+		pr_err("%s: no memory for device structure\n", __func__);
+		return -ENOMEM;
+	}
+	/* pci setup */
+	if (pci_enable_device(pdev) < 0) {
+		kfree(dev);
+		pr_err("%s: pci_enable_device failed\n", __func__);
+		return -ENODEV;
+	}
+	dev->active = 1;
+	pci_set_drvdata(pdev, dev);
+
+	/* PCI resource allocation */
+	resource = pci_resource_start(pdev, 1);
+	len = pci_resource_len(pdev, 1);
+
+	if (!request_mem_region(resource, len, KBUILD_MODNAME)) {
+		dev_err(&pdev->dev, "%s: pci device used already\n", __func__);
+		retval = -EBUSY;
+		goto finished;
+	}
+	dev->phys_addr = resource;
+	dev->mem_region = 1;
+
+	dev->base_addr = ioremap_nocache(resource, len);
+	if (!dev->base_addr) {
+		pr_err("%s: device memory cannot be mapped\n", __func__);
+		retval = -ENOMEM;
+		goto finished;
+	}
+	if (!pdev->irq) {
+		dev_err(&pdev->dev, "%s: irq not set\n", __func__);
+		retval = -ENODEV;
+		goto finished;
+	}
+	pch_udc = dev;
+	/* initialize the hardware */
+	if (pch_udc_pcd_init(dev))
+		goto finished;
+	if (request_irq(pdev->irq, pch_udc_isr, IRQF_SHARED, KBUILD_MODNAME,
+			dev)) {
+		dev_err(&pdev->dev, "%s: request_irq(%d) fail\n", __func__,
+			pdev->irq);
+		retval = -ENODEV;
+		goto finished;
+	}
+	dev->irq = pdev->irq;
+	dev->irq_registered = 1;
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	/* device struct setup */
+	spin_lock_init(&dev->lock);
+	dev->pdev = pdev;
+	dev->gadget.ops = &pch_udc_ops;
+
+	retval = init_dma_pools(dev);
+	if (retval)
+		goto finished;
+
+	dev_set_name(&dev->gadget.dev, "gadget");
+	dev->gadget.dev.parent = &pdev->dev;
+	dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+	dev->gadget.dev.release = gadget_release;
+	dev->gadget.name = KBUILD_MODNAME;
+	dev->gadget.is_dualspeed = 1;
+
+	retval = device_register(&dev->gadget.dev);
+	if (retval)
+		goto finished;
+	dev->registered = 1;
+
+	/* Put the device in disconnected state till a driver is bound */
+	pch_udc_set_disconnect(dev);
+	return 0;
+
+finished:
+	pch_udc_remove(pdev);
+	return retval;
+}
+
+static DEFINE_PCI_DEVICE_TABLE(pch_udc_pcidev_id) = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
+		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+		.class_mask = 0xffffffff,
+	},
+	{ 0 },
+};
+
+MODULE_DEVICE_TABLE(pci, pch_udc_pcidev_id);
+
+
+static struct pci_driver pch_udc_driver = {
+	.name =	KBUILD_MODNAME,
+	.id_table =	pch_udc_pcidev_id,
+	.probe =	pch_udc_probe,
+	.remove =	pch_udc_remove,
+	.suspend =	pch_udc_suspend,
+	.resume =	pch_udc_resume,
+	.shutdown =	pch_udc_shutdown,
+};
+
+static int __init pch_udc_pci_init(void)
+{
+	return pci_register_driver(&pch_udc_driver);
+}
+module_init(pch_udc_pci_init);
+
+static void __exit pch_udc_pci_exit(void)
+{
+	pci_unregister_driver(&pch_udc_driver);
+}
+module_exit(pch_udc_pci_exit);
+
+MODULE_DESCRIPTION("Intel EG20T USB Device Controller");
+MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/u_audio.c b/drivers/usb/gadget/u_audio.c
index 7a86d2c9109..59ffe1ecf1c 100644
--- a/drivers/usb/gadget/u_audio.c
+++ b/drivers/usb/gadget/u_audio.c
@@ -255,6 +255,7 @@ static int gaudio_open_snd_dev(struct gaudio *card)
 		ERROR(card, "No such PCM capture device: %s\n", fn_cap);
 		snd->substream = NULL;
 		snd->card = NULL;
+		snd->filp = NULL;
 	} else {
 		pcm_file = snd->filp->private_data;
 		snd->substream = pcm_file->substream;
@@ -273,17 +274,17 @@ static int gaudio_close_snd_dev(struct gaudio *gau)
 
 	/* Close control device */
 	snd = &gau->control;
-	if (!IS_ERR(snd->filp))
+	if (snd->filp)
 		filp_close(snd->filp, current->files);
 
 	/* Close PCM playback device and setup substream */
 	snd = &gau->playback;
-	if (!IS_ERR(snd->filp))
+	if (snd->filp)
 		filp_close(snd->filp, current->files);
 
 	/* Close PCM capture device and setup substream */
 	snd = &gau->capture;
-	if (!IS_ERR(snd->filp))
+	if (snd->filp)
 		filp_close(snd->filp, current->files);
 
 	return 0;
@@ -304,8 +305,7 @@ int __init gaudio_setup(struct gaudio *card)
 	ret = gaudio_open_snd_dev(card);
 	if (ret)
 		ERROR(card, "we need at least one control device\n");
-
-	if (!the_card)
+	else if (!the_card)
 		the_card = card;
 
 	return ret;
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index fbe86ca9580..1eda968b564 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -240,6 +240,9 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags)
 	size += out->maxpacket - 1;
 	size -= size % out->maxpacket;
 
+	if (dev->port_usb->is_fixed)
+		size = max(size, dev->port_usb->fixed_out_len);
+
 	skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags);
 	if (skb == NULL) {
 		DBG(dev, "no rx skb\n");
@@ -578,12 +581,19 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 	req->context = skb;
 	req->complete = tx_complete;
 
+	/* NCM requires no zlp if transfer is dwNtbInMaxSize */
+	if (dev->port_usb->is_fixed &&
+	    length == dev->port_usb->fixed_in_len &&
+	    (length % in->maxpacket) == 0)
+		req->zero = 0;
+	else
+		req->zero = 1;
+
 	/* use zlp framing on tx for strict CDC-Ether conformance,
 	 * though any robust network rx path ignores extra padding.
 	 * and some hardware doesn't like to write zlps.
 	 */
-	req->zero = 1;
-	if (!dev->zlp && (length % in->maxpacket) == 0)
+	if (req->zero && !dev->zlp && (length % in->maxpacket) == 0)
 		length++;
 
 	req->length = length;
@@ -829,11 +839,9 @@ void gether_cleanup(void)
 		return;
 
 	unregister_netdev(the_dev->net);
+	flush_work_sync(&the_dev->work);
 	free_netdev(the_dev->net);
 
-	/* assuming we used keventd, it must quiesce too */
-	flush_scheduled_work();
-
 	the_dev = NULL;
 }
 
diff --git a/drivers/usb/gadget/u_ether.h b/drivers/usb/gadget/u_ether.h
index 3c8c0c9f9d7..b56e1e7d423 100644
--- a/drivers/usb/gadget/u_ether.h
+++ b/drivers/usb/gadget/u_ether.h
@@ -62,6 +62,10 @@ struct gether {
 
 	/* hooks for added framing, as needed for RNDIS and EEM. */
 	u32				header_len;
+	/* NCM requires fixed size bundles */
+	bool				is_fixed;
+	u32				fixed_out_len;
+	u32				fixed_in_len;
 	struct sk_buff			*(*wrap)(struct gether *port,
 						struct sk_buff *skb);
 	int				(*unwrap)(struct gether *port,
@@ -103,6 +107,7 @@ static inline bool can_support_ecm(struct usb_gadget *gadget)
 /* each configuration may bind one instance of an ethernet link */
 int geth_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
 int ecm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
+int ncm_bind_config(struct usb_configuration *c, u8 ethaddr[ETH_ALEN]);
 int eem_bind_config(struct usb_configuration *c);
 
 #ifdef USB_ETH_RNDIS
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 01e5354a4c2..40f7716b31f 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -105,11 +105,15 @@ struct gs_port {
 	wait_queue_head_t	close_wait;	/* wait for last close */
 
 	struct list_head	read_pool;
+	int read_started;
+	int read_allocated;
 	struct list_head	read_queue;
 	unsigned		n_read;
 	struct tasklet_struct	push;
 
 	struct list_head	write_pool;
+	int write_started;
+	int write_allocated;
 	struct gs_buf		port_write_buf;
 	wait_queue_head_t	drain_wait;	/* wait while writes drain */
 
@@ -363,6 +367,9 @@ __acquires(&port->port_lock)
 		struct usb_request	*req;
 		int			len;
 
+		if (port->write_started >= QUEUE_SIZE)
+			break;
+
 		req = list_entry(pool->next, struct usb_request, list);
 		len = gs_send_packet(port, req->buf, in->maxpacket);
 		if (len == 0) {
@@ -397,6 +404,8 @@ __acquires(&port->port_lock)
 			break;
 		}
 
+		port->write_started++;
+
 		/* abort immediately after disconnect */
 		if (!port->port_usb)
 			break;
@@ -418,7 +427,6 @@ __acquires(&port->port_lock)
 {
 	struct list_head	*pool = &port->read_pool;
 	struct usb_ep		*out = port->port_usb->out;
-	unsigned		started = 0;
 
 	while (!list_empty(pool)) {
 		struct usb_request	*req;
@@ -430,6 +438,9 @@ __acquires(&port->port_lock)
 		if (!tty)
 			break;
 
+		if (port->read_started >= QUEUE_SIZE)
+			break;
+
 		req = list_entry(pool->next, struct usb_request, list);
 		list_del(&req->list);
 		req->length = out->maxpacket;
@@ -447,13 +458,13 @@ __acquires(&port->port_lock)
 			list_add(&req->list, pool);
 			break;
 		}
-		started++;
+		port->read_started++;
 
 		/* abort immediately after disconnect */
 		if (!port->port_usb)
 			break;
 	}
-	return started;
+	return port->read_started;
 }
 
 /*
@@ -535,6 +546,7 @@ static void gs_rx_push(unsigned long _port)
 		}
 recycle:
 		list_move(&req->list, &port->read_pool);
+		port->read_started--;
 	}
 
 	/* Push from tty to ldisc; without low_latency set this is handled by
@@ -587,6 +599,7 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
 
 	spin_lock(&port->port_lock);
 	list_add(&req->list, &port->write_pool);
+	port->write_started--;
 
 	switch (req->status) {
 	default:
@@ -608,7 +621,8 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
 	spin_unlock(&port->port_lock);
 }
 
-static void gs_free_requests(struct usb_ep *ep, struct list_head *head)
+static void gs_free_requests(struct usb_ep *ep, struct list_head *head,
+							 int *allocated)
 {
 	struct usb_request	*req;
 
@@ -616,25 +630,31 @@ static void gs_free_requests(struct usb_ep *ep, struct list_head *head)
 		req = list_entry(head->next, struct usb_request, list);
 		list_del(&req->list);
 		gs_free_req(ep, req);
+		if (allocated)
+			(*allocated)--;
 	}
 }
 
 static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
-		void (*fn)(struct usb_ep *, struct usb_request *))
+		void (*fn)(struct usb_ep *, struct usb_request *),
+		int *allocated)
 {
 	int			i;
 	struct usb_request	*req;
+	int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE;
 
 	/* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
 	 * do quite that many this time, don't fail ... we just won't
 	 * be as speedy as we might otherwise be.
 	 */
-	for (i = 0; i < QUEUE_SIZE; i++) {
+	for (i = 0; i < n; i++) {
 		req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
 		if (!req)
 			return list_empty(head) ? -ENOMEM : 0;
 		req->complete = fn;
 		list_add_tail(&req->list, head);
+		if (allocated)
+			(*allocated)++;
 	}
 	return 0;
 }
@@ -661,14 +681,15 @@ static int gs_start_io(struct gs_port *port)
 	 * configurations may use different endpoints with a given port;
 	 * and high speed vs full speed changes packet sizes too.
 	 */
-	status = gs_alloc_requests(ep, head, gs_read_complete);
+	status = gs_alloc_requests(ep, head, gs_read_complete,
+		&port->read_allocated);
 	if (status)
 		return status;
 
 	status = gs_alloc_requests(port->port_usb->in, &port->write_pool,
-			gs_write_complete);
+			gs_write_complete, &port->write_allocated);
 	if (status) {
-		gs_free_requests(ep, head);
+		gs_free_requests(ep, head, &port->read_allocated);
 		return status;
 	}
 
@@ -680,8 +701,9 @@ static int gs_start_io(struct gs_port *port)
 	if (started) {
 		tty_wakeup(port->port_tty);
 	} else {
-		gs_free_requests(ep, head);
-		gs_free_requests(port->port_usb->in, &port->write_pool);
+		gs_free_requests(ep, head, &port->read_allocated);
+		gs_free_requests(port->port_usb->in, &port->write_pool,
+			&port->write_allocated);
 		status = -EIO;
 	}
 
@@ -1315,8 +1337,12 @@ void gserial_disconnect(struct gserial *gser)
 	spin_lock_irqsave(&port->port_lock, flags);
 	if (port->open_count == 0 && !port->openclose)
 		gs_buf_free(&port->port_write_buf);
-	gs_free_requests(gser->out, &port->read_pool);
-	gs_free_requests(gser->out, &port->read_queue);
-	gs_free_requests(gser->in, &port->write_pool);
+	gs_free_requests(gser->out, &port->read_pool, NULL);
+	gs_free_requests(gser->out, &port->read_queue, NULL);
+	gs_free_requests(gser->in, &port->write_pool, NULL);
+
+	port->read_allocated = port->read_started =
+		port->write_allocated = port->write_started = 0;
+
 	spin_unlock_irqrestore(&port->port_lock, flags);
 }
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 2391c396ca3..24046c0f587 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -122,7 +122,7 @@ config USB_EHCI_FSL
 	bool "Support for Freescale on-chip EHCI USB controller"
 	depends on USB_EHCI_HCD && FSL_SOC
 	select USB_EHCI_ROOT_HUB_TT
-	select USB_FSL_MPH_DR_OF
+	select USB_FSL_MPH_DR_OF if OF
 	---help---
 	  Variation of ARC USB block used in some Freescale chips.
 
@@ -133,6 +133,25 @@ config USB_EHCI_MXC
 	---help---
 	  Variation of ARC USB block used in some Freescale chips.
 
+config USB_EHCI_HCD_OMAP
+	bool "EHCI support for OMAP3 and later chips"
+	depends on USB_EHCI_HCD && ARCH_OMAP
+	default y
+	--- help ---
+	  Enables support for the on-chip EHCI controller on
+	  OMAP3 and later chips.
+
+config USB_EHCI_MSM
+	bool "Support for MSM on-chip EHCI USB controller"
+	depends on USB_EHCI_HCD && ARCH_MSM
+	select USB_EHCI_ROOT_HUB_TT
+	select USB_MSM_OTG_72K
+	---help---
+	  Enables support for the USB Host controller present on the
+	  Qualcomm chipsets. Root Hub has inbuilt TT.
+	  This driver depends on OTG driver for PHY initialization,
+	  clock management, powering up VBUS, and power management.
+
 config USB_EHCI_HCD_PPC_OF
 	bool "EHCI support for PPC USB controller on OF platform bus"
 	depends on USB_EHCI_HCD && PPC_OF
@@ -147,6 +166,14 @@ config USB_W90X900_EHCI
 	---help---
 		Enables support for the W90X900 USB controller
 
+config USB_CNS3XXX_EHCI
+	bool "Cavium CNS3XXX EHCI Module"
+	depends on USB_EHCI_HCD && ARCH_CNS3XXX
+	---help---
+	  Enable support for the CNS3XXX SOC's on-chip EHCI controller.
+	  It is needed for high-speed (480Mbit/sec) USB 2.0 device
+	  support.
+
 config USB_OXU210HP_HCD
 	tristate "OXU210HP HCD support"
 	depends on USB
@@ -286,6 +313,13 @@ config USB_OHCI_HCD_SSB
 
 	  If unsure, say N.
 
+config USB_CNS3XXX_OHCI
+	bool "Cavium CNS3XXX OHCI Module"
+	depends on USB_OHCI_HCD && ARCH_CNS3XXX
+	---help---
+	  Enable support for the CNS3XXX SOC's on-chip OHCI controller.
+	  It is needed for low-speed USB 1.0 device support.
+
 config USB_OHCI_BIG_ENDIAN_DESC
 	bool
 	depends on USB_OHCI_HCD
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 51bd0edf544..d6a69d514a8 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -99,6 +99,7 @@ static const struct hc_driver ehci_atmel_hc_driver = {
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
 	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
 
 	/* scheduling support */
 	.get_frame_number	= ehci_get_frame,
@@ -110,6 +111,8 @@ static const struct hc_driver ehci_atmel_hc_driver = {
 	.bus_resume		= ehci_bus_resume,
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
 };
 
 static int __init ehci_atmel_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-cns3xxx.c b/drivers/usb/host/ehci-cns3xxx.c
new file mode 100644
index 00000000000..708a05b5d25
--- /dev/null
+++ b/drivers/usb/host/ehci-cns3xxx.c
@@ -0,0 +1,171 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/atomic.h>
+#include <mach/cns3xxx.h>
+#include <mach/pm.h>
+
+static int cns3xxx_ehci_init(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 *
+	 * Set USB AHB INCR length to 16
+	 */
+	if (atomic_inc_return(&usb_pwr_ref) == 1) {
+		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+			MISC_CHIP_CONFIG_REG);
+	}
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs
+		+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	hcd->has_tt = 0;
+	ehci_reset(ehci);
+
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_port_power(ehci, 0);
+
+	return retval;
+}
+
+static const struct hc_driver cns3xxx_ehci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "CNS3XXX EHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+	.reset			= cns3xxx_ehci_init,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+	.get_frame_number	= ehci_get_frame,
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+#endif
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int cns3xxx_ehci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd *hcd;
+	const struct hc_driver *driver = &cns3xxx_ehci_hc_driver;
+	struct resource *res;
+	int irq;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no IRQ.\n");
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no register addr.\n");
+		retval = -ENODEV;
+		goto err1;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err2;
+	}
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval == 0)
+		return retval;
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+
+	return retval;
+}
+
+static int cns3xxx_ehci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 */
+	if (atomic_dec_return(&usb_pwr_ref) == 0)
+		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+
+	usb_put_hcd(hcd);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:cns3xxx-ehci");
+
+static struct platform_driver cns3xxx_ehci_driver = {
+	.probe = cns3xxx_ehci_probe,
+	.remove = cns3xxx_ehci_remove,
+	.driver = {
+		.name = "cns3xxx-ehci",
+	},
+};
diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c
index 86afdc73322..3be238a24cc 100644
--- a/drivers/usb/host/ehci-dbg.c
+++ b/drivers/usb/host/ehci-dbg.c
@@ -879,7 +879,7 @@ static int fill_buffer(struct debug_buffer *buf)
 	int ret = 0;
 
 	if (!buf->output_buf)
-		buf->output_buf = (char *)vmalloc(buf->alloc_size);
+		buf->output_buf = vmalloc(buf->alloc_size);
 
 	if (!buf->output_buf) {
 		ret = -ENOMEM;
@@ -1067,7 +1067,7 @@ static inline void create_debug_files (struct ehci_hcd *ehci)
 						    &debug_registers_fops))
 		goto file_error;
 
-	if (!debugfs_create_file("lpm", S_IRUGO|S_IWUGO, ehci->debug_dir, bus,
+	if (!debugfs_create_file("lpm", S_IRUGO|S_IWUSR, ehci->debug_dir, bus,
 						    &debug_lpm_fops))
 		goto file_error;
 
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 502a7e6fef4..6fee3cd58ef 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -114,6 +114,9 @@ MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n");
 
 #define	INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
+/* for ASPM quirk of ISOC on AMD SB800 */
+static struct pci_dev *amd_nb_dev;
+
 /*-------------------------------------------------------------------------*/
 
 #include "ehci.h"
@@ -529,6 +532,11 @@ static void ehci_stop (struct usb_hcd *hcd)
 	spin_unlock_irq (&ehci->lock);
 	ehci_mem_cleanup (ehci);
 
+	if (amd_nb_dev) {
+		pci_dev_put(amd_nb_dev);
+		amd_nb_dev = NULL;
+	}
+
 #ifdef	EHCI_STATS
 	ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n",
 		ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim,
@@ -1063,10 +1071,11 @@ rescan:
 				tmp && tmp != qh;
 				tmp = tmp->qh_next.qh)
 			continue;
-		/* periodic qh self-unlinks on empty */
-		if (!tmp)
-			goto nogood;
-		unlink_async (ehci, qh);
+		/* periodic qh self-unlinks on empty, and a COMPLETING qh
+		 * may already be unlinked.
+		 */
+		if (tmp)
+			unlink_async(ehci, qh);
 		/* FALL THROUGH */
 	case QH_STATE_UNLINK:		/* wait for hw to finish? */
 	case QH_STATE_UNLINK_WAIT:
@@ -1083,7 +1092,6 @@ idle_timeout:
 		}
 		/* else FALL THROUGH */
 	default:
-nogood:
 		/* caller was supposed to have unlinked any requests;
 		 * that's not our job.  just leak this memory.
 		 */
@@ -1166,12 +1174,17 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_mxc_driver
 #endif
 
+#ifdef CONFIG_CPU_SUBTYPE_SH7786
+#include "ehci-sh.c"
+#define PLATFORM_DRIVER		ehci_hcd_sh_driver
+#endif
+
 #ifdef CONFIG_SOC_AU1200
 #include "ehci-au1xxx.c"
 #define	PLATFORM_DRIVER		ehci_hcd_au1xxx_driver
 #endif
 
-#ifdef CONFIG_ARCH_OMAP3
+#ifdef CONFIG_USB_EHCI_HCD_OMAP
 #include "ehci-omap.c"
 #define        PLATFORM_DRIVER         ehci_hcd_omap_driver
 #endif
@@ -1216,6 +1229,26 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_octeon_driver
 #endif
 
+#ifdef CONFIG_USB_CNS3XXX_EHCI
+#include "ehci-cns3xxx.c"
+#define PLATFORM_DRIVER		cns3xxx_ehci_driver
+#endif
+
+#ifdef CONFIG_ARCH_VT8500
+#include "ehci-vt8500.c"
+#define	PLATFORM_DRIVER		vt8500_ehci_driver
+#endif
+
+#ifdef CONFIG_PLAT_SPEAR
+#include "ehci-spear.c"
+#define PLATFORM_DRIVER		spear_ehci_hcd_driver
+#endif
+
+#ifdef CONFIG_USB_EHCI_MSM
+#include "ehci-msm.c"
+#define PLATFORM_DRIVER		ehci_msm_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
     !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c
index d36e4e75e08..12f70c302b0 100644
--- a/drivers/usb/host/ehci-mem.c
+++ b/drivers/usb/host/ehci-mem.c
@@ -141,6 +141,10 @@ static void ehci_mem_cleanup (struct ehci_hcd *ehci)
 		qh_put (ehci->async);
 	ehci->async = NULL;
 
+	if (ehci->dummy)
+		qh_put(ehci->dummy);
+	ehci->dummy = NULL;
+
 	/* DMA consistent memory and pools */
 	if (ehci->qtd_pool)
 		dma_pool_destroy (ehci->qtd_pool);
@@ -227,8 +231,26 @@ static int ehci_mem_init (struct ehci_hcd *ehci, gfp_t flags)
 	if (ehci->periodic == NULL) {
 		goto fail;
 	}
-	for (i = 0; i < ehci->periodic_size; i++)
-		ehci->periodic [i] = EHCI_LIST_END(ehci);
+
+	if (ehci->use_dummy_qh) {
+		struct ehci_qh_hw	*hw;
+		ehci->dummy = ehci_qh_alloc(ehci, flags);
+		if (!ehci->dummy)
+			goto fail;
+
+		hw = ehci->dummy->hw;
+		hw->hw_next = EHCI_LIST_END(ehci);
+		hw->hw_qtd_next = EHCI_LIST_END(ehci);
+		hw->hw_alt_next = EHCI_LIST_END(ehci);
+		hw->hw_token &= ~QTD_STS_ACTIVE;
+		ehci->dummy->hw = hw;
+
+		for (i = 0; i < ehci->periodic_size; i++)
+			ehci->periodic[i] = ehci->dummy->qh_dma;
+	} else {
+		for (i = 0; i < ehci->periodic_size; i++)
+			ehci->periodic[i] = EHCI_LIST_END(ehci);
+	}
 
 	/* software shadow of hardware table */
 	ehci->pshadow = kcalloc(ehci->periodic_size, sizeof(void *), flags);
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
new file mode 100644
index 00000000000..413f4deca53
--- /dev/null
+++ b/drivers/usb/host/ehci-msm.c
@@ -0,0 +1,345 @@
+/* ehci-msm.c - HSUSB Host Controller Driver Implementation
+ *
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * Partly derived from ehci-fsl.c and ehci-hcd.c
+ * Copyright (c) 2000-2004 by David Brownell
+ * Copyright (c) 2005 MontaVista Software
+ *
+ * All source code in this file is licensed under the following license except
+ * where indicated.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * See the GNU General Public License for more details.
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, you can find it at http://www.fsf.org
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/usb/otg.h>
+#include <linux/usb/msm_hsusb_hw.h>
+
+#define MSM_USB_BASE (hcd->regs)
+
+static struct otg_transceiver *otg;
+
+/*
+ * ehci_run defined in drivers/usb/host/ehci-hcd.c reset the controller and
+ * the configuration settings in ehci_msm_reset vanish after controller is
+ * reset. Resetting the controler in ehci_run seems to be un-necessary
+ * provided HCD reset the controller before calling ehci_run. Most of the HCD
+ * do but some are not. So this function is same as ehci_run but we don't
+ * reset the controller here.
+ */
+static int ehci_msm_run(struct usb_hcd *hcd)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+	u32			temp;
+	u32			hcc_params;
+
+	hcd->uses_new_polling = 1;
+
+	ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+	ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
+
+	/*
+	 * hcc_params controls whether ehci->regs->segment must (!!!)
+	 * be used; it constrains QH/ITD/SITD and QTD locations.
+	 * pci_pool consistent memory always uses segment zero.
+	 * streaming mappings for I/O buffers, like pci_map_single(),
+	 * can return segments above 4GB, if the device allows.
+	 *
+	 * NOTE:  the dma mask is visible through dma_supported(), so
+	 * drivers can pass this info along ... like NETIF_F_HIGHDMA,
+	 * Scsi_Host.highmem_io, and so forth.  It's readonly to all
+	 * host side drivers though.
+	 */
+	hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
+	if (HCC_64BIT_ADDR(hcc_params))
+		ehci_writel(ehci, 0, &ehci->regs->segment);
+
+	/*
+	 * Philips, Intel, and maybe others need CMD_RUN before the
+	 * root hub will detect new devices (why?); NEC doesn't
+	 */
+	ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
+	ehci->command |= CMD_RUN;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	dbg_cmd(ehci, "init", ehci->command);
+
+	/*
+	 * Start, enabling full USB 2.0 functionality ... usb 1.1 devices
+	 * are explicitly handed to companion controller(s), so no TT is
+	 * involved with the root hub.  (Except where one is integrated,
+	 * and there's no companion controller unless maybe for USB OTG.)
+	 *
+	 * Turning on the CF flag will transfer ownership of all ports
+	 * from the companions to the EHCI controller.  If any of the
+	 * companions are in the middle of a port reset at the time, it
+	 * could cause trouble.  Write-locking ehci_cf_port_reset_rwsem
+	 * guarantees that no resets are in progress.  After we set CF,
+	 * a short delay lets the hardware catch up; new resets shouldn't
+	 * be started before the port switching actions could complete.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+	hcd->state = HC_STATE_RUNNING;
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+	usleep_range(5000, 5500);
+	up_write(&ehci_cf_port_reset_rwsem);
+	ehci->last_periodic_enable = ktime_get_real();
+
+	temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
+	ehci_info(ehci,
+		"USB %x.%x started, EHCI %x.%02x%s\n",
+		((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
+		temp >> 8, temp & 0xff,
+		ignore_oc ? ", overcurrent ignored" : "");
+
+	ehci_writel(ehci, INTR_MASK,
+		    &ehci->regs->intr_enable); /* Turn On Interrupts */
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	create_debug_files(ehci);
+	create_companion_file(ehci);
+
+	return 0;
+}
+
+static int ehci_msm_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval;
+
+	ehci->caps = USB_CAPLENGTH;
+	ehci->regs = USB_CAPLENGTH +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+	/* cache the data to minimize the chip reads*/
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	hcd->has_tt = 1;
+	ehci->sbrn = HCD_USB2;
+
+	/* data structure init */
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	retval = ehci_reset(ehci);
+	if (retval)
+		return retval;
+
+	/* bursts of unspecified length. */
+	writel(0, USB_AHBBURST);
+	/* Use the AHB transactor */
+	writel(0, USB_AHBMODE);
+	/* Disable streaming mode and select host mode */
+	writel(0x13, USB_USBMODE);
+
+	ehci_port_power(ehci, 1);
+	return 0;
+}
+
+static struct hc_driver msm_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "Qualcomm On-Chip EHCI Host Controller",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_USB2 | HCD_MEMORY,
+
+	.reset			= ehci_msm_reset,
+	.start			= ehci_msm_run,
+
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	/*
+	 * PM support
+	 */
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+};
+
+static int ehci_msm_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct resource *res;
+	int ret;
+
+	dev_dbg(&pdev->dev, "ehci_msm proble\n");
+
+	hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		dev_err(&pdev->dev, "Unable to create HCD\n");
+		return  -ENOMEM;
+	}
+
+	hcd->irq = platform_get_irq(pdev, 0);
+	if (hcd->irq < 0) {
+		dev_err(&pdev->dev, "Unable to get IRQ resource\n");
+		ret = hcd->irq;
+		goto put_hcd;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Unable to get memory resource\n");
+		ret = -ENODEV;
+		goto put_hcd;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto put_hcd;
+	}
+
+	/*
+	 * OTG driver takes care of PHY initialization, clock management,
+	 * powering up VBUS, mapping of registers address space and power
+	 * management.
+	 */
+	otg = otg_get_transceiver();
+	if (!otg) {
+		dev_err(&pdev->dev, "unable to find transceiver\n");
+		ret = -ENODEV;
+		goto unmap;
+	}
+
+	ret = otg_set_host(otg, &hcd->self);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to register with transceiver\n");
+		goto put_transceiver;
+	}
+
+	device_init_wakeup(&pdev->dev, 1);
+	/*
+	 * OTG device parent of HCD takes care of putting
+	 * hardware into low power mode.
+	 */
+	pm_runtime_no_callbacks(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+put_transceiver:
+	otg_put_transceiver(otg);
+unmap:
+	iounmap(hcd->regs);
+put_hcd:
+	usb_put_hcd(hcd);
+
+	return ret;
+}
+
+static int __devexit ehci_msm_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	otg_set_host(otg, NULL);
+	otg_put_transceiver(otg);
+
+	usb_put_hcd(hcd);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ehci_msm_pm_suspend(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+	bool wakeup = device_may_wakeup(dev);
+
+	dev_dbg(dev, "ehci-msm PM suspend\n");
+
+	/*
+	 * EHCI helper function has also the same check before manipulating
+	 * port wakeup flags.  We do check here the same condition before
+	 * calling the same helper function to avoid bringing hardware
+	 * from Low power mode when there is no need for adjusting port
+	 * wakeup flags.
+	 */
+	if (hcd->self.root_hub->do_remote_wakeup && !wakeup) {
+		pm_runtime_resume(dev);
+		ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
+				wakeup);
+	}
+
+	return 0;
+}
+
+static int ehci_msm_pm_resume(struct device *dev)
+{
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "ehci-msm PM resume\n");
+	ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd));
+
+	return 0;
+}
+#else
+#define ehci_msm_pm_suspend	NULL
+#define ehci_msm_pm_resume	NULL
+#endif
+
+static const struct dev_pm_ops ehci_msm_dev_pm_ops = {
+	.suspend         = ehci_msm_pm_suspend,
+	.resume          = ehci_msm_pm_resume,
+};
+
+static struct platform_driver ehci_msm_driver = {
+	.probe	= ehci_msm_probe,
+	.remove	= __devexit_p(ehci_msm_remove),
+	.driver = {
+		   .name = "msm_hsusb_host",
+		   .pm = &ehci_msm_dev_pm_ops,
+	},
+};
diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c
index ac9c4d7c44a..fa59b26fc5b 100644
--- a/drivers/usb/host/ehci-mxc.c
+++ b/drivers/usb/host/ehci-mxc.c
@@ -28,7 +28,7 @@
 #define ULPI_VIEWPORT_OFFSET	0x170
 
 struct ehci_mxc_priv {
-	struct clk *usbclk, *ahbclk;
+	struct clk *usbclk, *ahbclk, *phy1clk;
 	struct usb_hcd *hcd;
 };
 
@@ -38,10 +38,6 @@ static int ehci_mxc_setup(struct usb_hcd *hcd)
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	int retval;
 
-	/* EHCI registers start at offset 0x100 */
-	ehci->caps = hcd->regs + 0x100;
-	ehci->regs = hcd->regs + 0x100 +
-	    HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
 	dbg_hcs_params(ehci, "reset");
 	dbg_hcc_params(ehci, "reset");
 
@@ -92,6 +88,7 @@ static const struct hc_driver ehci_mxc_hc_driver = {
 	.urb_enqueue = ehci_urb_enqueue,
 	.urb_dequeue = ehci_urb_dequeue,
 	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset = ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
@@ -107,6 +104,8 @@ static const struct hc_driver ehci_mxc_hc_driver = {
 	.bus_resume = ehci_bus_resume,
 	.relinquish_port = ehci_relinquish_port,
 	.port_handed_over = ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
 static int ehci_mxc_drv_probe(struct platform_device *pdev)
@@ -114,9 +113,10 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
 	struct usb_hcd *hcd;
 	struct resource *res;
-	int irq, ret, temp;
+	int irq, ret;
 	struct ehci_mxc_priv *priv;
 	struct device *dev = &pdev->dev;
+	struct ehci_hcd *ehci;
 
 	dev_info(&pdev->dev, "initializing i.MX USB Controller\n");
 
@@ -160,17 +160,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		goto err_ioremap;
 	}
 
-	/* call platform specific init function */
-	if (pdata->init) {
-		ret = pdata->init(pdev);
-		if (ret) {
-			dev_err(dev, "platform init failed\n");
-			goto err_init;
-		}
-		/* platforms need some time to settle changed IO settings */
-		mdelay(10);
-	}
-
 	/* enable clocks */
 	priv->usbclk = clk_get(dev, "usb");
 	if (IS_ERR(priv->usbclk)) {
@@ -188,15 +177,46 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		clk_enable(priv->ahbclk);
 	}
 
-	/* set up the PORTSCx register */
-	ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
-	mdelay(10);
+	/* "dr" device has its own clock */
+	if (pdev->id == 0) {
+		priv->phy1clk = clk_get(dev, "usb_phy1");
+		if (IS_ERR(priv->phy1clk)) {
+			ret = PTR_ERR(priv->phy1clk);
+			goto err_clk_phy;
+		}
+		clk_enable(priv->phy1clk);
+	}
+
+
+	/* call platform specific init function */
+	if (pdata->init) {
+		ret = pdata->init(pdev);
+		if (ret) {
+			dev_err(dev, "platform init failed\n");
+			goto err_init;
+		}
+		/* platforms need some time to settle changed IO settings */
+		mdelay(10);
+	}
 
 	/* setup specific usb hw */
 	ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
 	if (ret < 0)
 		goto err_init;
 
+	ehci = hcd_to_ehci(hcd);
+
+	/* EHCI registers start at offset 0x100 */
+	ehci->caps = hcd->regs + 0x100;
+	ehci->regs = hcd->regs + 0x100 +
+	    HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+	/* set up the PORTSCx register */
+	ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
+
+	/* is this really needed? */
+	msleep(10);
+
 	/* Initialize the transceiver */
 	if (pdata->otg) {
 		pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
@@ -226,6 +246,11 @@ err_add:
 	if (pdata && pdata->exit)
 		pdata->exit(pdev);
 err_init:
+	if (priv->phy1clk) {
+		clk_disable(priv->phy1clk);
+		clk_put(priv->phy1clk);
+	}
+err_clk_phy:
 	if (priv->ahbclk) {
 		clk_disable(priv->ahbclk);
 		clk_put(priv->ahbclk);
@@ -269,6 +294,10 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
 		clk_disable(priv->ahbclk);
 		clk_put(priv->ahbclk);
 	}
+	if (priv->phy1clk) {
+		clk_disable(priv->phy1clk);
+		clk_put(priv->phy1clk);
+	}
 
 	kfree(priv);
 
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 116ae280053..680f2ef4e59 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -1,11 +1,12 @@
 /*
- * ehci-omap.c - driver for USBHOST on OMAP 34xx processor
+ * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
  *
- * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller
- * Tested on OMAP3430 ES2.0 SDP
+ * Bus Glue for the EHCI controllers in OMAP3/4
+ * Tested on several OMAP3 boards, and OMAP4 Pandaboard
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
  *	Author: Vikram Pandita <vikram.pandita@ti.com>
+ *	Author: Anand Gadiyar <gadiyar@ti.com>
  *
  * Copyright (C) 2009 Nokia Corporation
  *	Contact: Felipe Balbi <felipe.balbi@nokia.com>
@@ -26,11 +27,14 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  *
- * TODO (last updated Feb 12, 2010):
+ * TODO (last updated Nov 21, 2010):
  *	- add kernel-doc
  *	- enable AUTOIDLE
  *	- add suspend/resume
  *	- move workarounds to board-files
+ *	- factor out code common to OHCI
+ *	- add HSIC and TLL support
+ *	- convert to use hwmod and runtime PM
  */
 
 #include <linux/platform_device.h>
@@ -86,9 +90,9 @@
 #define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num)
 
 #define OMAP_TLL_CHANNEL_COUNT				3
-#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 1)
-#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 2)
-#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 4)
+#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 0)
+#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 1)
+#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 2)
 
 /* UHH Register Set */
 #define	OMAP_UHH_REVISION				(0x00)
@@ -114,6 +118,23 @@
 #define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
 #define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
 
+/* OMAP4-specific defines */
+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
+#define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
+
+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
+#define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
+#define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
+
+#define OMAP4_P1_MODE_CLEAR				(3 << 16)
+#define OMAP4_P1_MODE_TLL				(1 << 16)
+#define OMAP4_P1_MODE_HSIC				(3 << 16)
+#define OMAP4_P2_MODE_CLEAR				(3 << 18)
+#define OMAP4_P2_MODE_TLL				(1 << 18)
+#define OMAP4_P2_MODE_HSIC				(3 << 18)
+
+#define OMAP_REV2_TLL_CHANNEL_COUNT			2
+
 #define	OMAP_UHH_DEBUG_CSR				(0x44)
 
 /* EHCI Register Set */
@@ -127,6 +148,17 @@
 #define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
 #define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0
 
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_EHCI_REV1	0x00000010	/* OMAP3 */
+#define OMAP_EHCI_REV2	0x50700100	/* OMAP4 */
+
+#define is_omap_ehci_rev1(x)	(x->omap_ehci_rev == OMAP_EHCI_REV1)
+#define is_omap_ehci_rev2(x)	(x->omap_ehci_rev == OMAP_EHCI_REV2)
+
+#define is_ehci_phy_mode(x)	(x == EHCI_HCD_OMAP_MODE_PHY)
+#define is_ehci_tll_mode(x)	(x == EHCI_HCD_OMAP_MODE_TLL)
+#define is_ehci_hsic_mode(x)	(x == EHCI_HCD_OMAP_MODE_HSIC)
+
 /*-------------------------------------------------------------------------*/
 
 static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val)
@@ -156,10 +188,14 @@ struct ehci_hcd_omap {
 	struct device		*dev;
 
 	struct clk		*usbhost_ick;
-	struct clk		*usbhost2_120m_fck;
-	struct clk		*usbhost1_48m_fck;
+	struct clk		*usbhost_hs_fck;
+	struct clk		*usbhost_fs_fck;
 	struct clk		*usbtll_fck;
 	struct clk		*usbtll_ick;
+	struct clk		*xclk60mhsp1_ck;
+	struct clk		*xclk60mhsp2_ck;
+	struct clk		*utmi_p1_fck;
+	struct clk		*utmi_p2_fck;
 
 	/* FIXME the following two workarounds are
 	 * board specific not silicon-specific so these
@@ -176,6 +212,9 @@ struct ehci_hcd_omap {
 	/* phy reset workaround */
 	int			phy_reset;
 
+	/* IP revision */
+	u32			omap_ehci_rev;
+
 	/* desired phy_mode: TLL, PHY */
 	enum ehci_hcd_omap_mode	port_mode[OMAP3_HS_USB_PORTS];
 
@@ -191,13 +230,14 @@ struct ehci_hcd_omap {
 
 /*-------------------------------------------------------------------------*/
 
-static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
+static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask,
+				u8 tll_channel_count)
 {
 	unsigned reg;
 	int i;
 
 	/* Program the 3 TLL channels upfront */
-	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+	for (i = 0; i < tll_channel_count; i++) {
 		reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
 
 		/* Disable AutoIdle, BitStuffing and use SDR Mode */
@@ -217,7 +257,7 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
 	ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
 
 	/* Enable channels now */
-	for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+	for (i = 0; i < tll_channel_count; i++) {
 		reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
 
 		/* Enable only the reg that is needed */
@@ -286,19 +326,19 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	}
 	clk_enable(omap->usbhost_ick);
 
-	omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
-	if (IS_ERR(omap->usbhost2_120m_fck)) {
-		ret = PTR_ERR(omap->usbhost2_120m_fck);
+	omap->usbhost_hs_fck = clk_get(omap->dev, "hs_fck");
+	if (IS_ERR(omap->usbhost_hs_fck)) {
+		ret = PTR_ERR(omap->usbhost_hs_fck);
 		goto err_host_120m_fck;
 	}
-	clk_enable(omap->usbhost2_120m_fck);
+	clk_enable(omap->usbhost_hs_fck);
 
-	omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
-	if (IS_ERR(omap->usbhost1_48m_fck)) {
-		ret = PTR_ERR(omap->usbhost1_48m_fck);
+	omap->usbhost_fs_fck = clk_get(omap->dev, "fs_fck");
+	if (IS_ERR(omap->usbhost_fs_fck)) {
+		ret = PTR_ERR(omap->usbhost_fs_fck);
 		goto err_host_48m_fck;
 	}
-	clk_enable(omap->usbhost1_48m_fck);
+	clk_enable(omap->usbhost_fs_fck);
 
 	if (omap->phy_reset) {
 		/* Refer: ISSUE1 */
@@ -333,6 +373,80 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	}
 	clk_enable(omap->usbtll_ick);
 
+	omap->omap_ehci_rev = ehci_omap_readl(omap->uhh_base,
+						OMAP_UHH_REVISION);
+	dev_dbg(omap->dev, "OMAP UHH_REVISION 0x%x\n",
+					omap->omap_ehci_rev);
+
+	/*
+	 * Enable per-port clocks as needed (newer controllers only).
+	 * - External ULPI clock for PHY mode
+	 * - Internal clocks for TLL and HSIC modes (TODO)
+	 */
+	if (is_omap_ehci_rev2(omap)) {
+		switch (omap->port_mode[0]) {
+		case EHCI_HCD_OMAP_MODE_PHY:
+			omap->xclk60mhsp1_ck = clk_get(omap->dev,
+							"xclk60mhsp1_ck");
+			if (IS_ERR(omap->xclk60mhsp1_ck)) {
+				ret = PTR_ERR(omap->xclk60mhsp1_ck);
+				dev_err(omap->dev,
+					"Unable to get Port1 ULPI clock\n");
+			}
+
+			omap->utmi_p1_fck = clk_get(omap->dev,
+							"utmi_p1_gfclk");
+			if (IS_ERR(omap->utmi_p1_fck)) {
+				ret = PTR_ERR(omap->utmi_p1_fck);
+				dev_err(omap->dev,
+					"Unable to get utmi_p1_fck\n");
+			}
+
+			ret = clk_set_parent(omap->utmi_p1_fck,
+						omap->xclk60mhsp1_ck);
+			if (ret != 0) {
+				dev_err(omap->dev,
+					"Unable to set P1 f-clock\n");
+			}
+			break;
+		case EHCI_HCD_OMAP_MODE_TLL:
+			/* TODO */
+		default:
+			break;
+		}
+		switch (omap->port_mode[1]) {
+		case EHCI_HCD_OMAP_MODE_PHY:
+			omap->xclk60mhsp2_ck = clk_get(omap->dev,
+							"xclk60mhsp2_ck");
+			if (IS_ERR(omap->xclk60mhsp2_ck)) {
+				ret = PTR_ERR(omap->xclk60mhsp2_ck);
+				dev_err(omap->dev,
+					"Unable to get Port2 ULPI clock\n");
+			}
+
+			omap->utmi_p2_fck = clk_get(omap->dev,
+							"utmi_p2_gfclk");
+			if (IS_ERR(omap->utmi_p2_fck)) {
+				ret = PTR_ERR(omap->utmi_p2_fck);
+				dev_err(omap->dev,
+					"Unable to get utmi_p2_fck\n");
+			}
+
+			ret = clk_set_parent(omap->utmi_p2_fck,
+						omap->xclk60mhsp2_ck);
+			if (ret != 0) {
+				dev_err(omap->dev,
+					"Unable to set P2 f-clock\n");
+			}
+			break;
+		case EHCI_HCD_OMAP_MODE_TLL:
+			/* TODO */
+		default:
+			break;
+		}
+	}
+
+
 	/* perform TLL soft reset, and wait until reset is complete */
 	ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
 			OMAP_USBTLL_SYSCONFIG_SOFTRESET);
@@ -360,12 +474,20 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 
 	/* Put UHH in NoIdle/NoStandby mode */
 	reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
-	reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
-			| OMAP_UHH_SYSCONFIG_SIDLEMODE
-			| OMAP_UHH_SYSCONFIG_CACTIVITY
-			| OMAP_UHH_SYSCONFIG_MIDLEMODE);
-	reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+	if (is_omap_ehci_rev1(omap)) {
+		reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+				| OMAP_UHH_SYSCONFIG_SIDLEMODE
+				| OMAP_UHH_SYSCONFIG_CACTIVITY
+				| OMAP_UHH_SYSCONFIG_MIDLEMODE);
+		reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+
 
+	} else if (is_omap_ehci_rev2(omap)) {
+		reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
+		reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
+		reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
+	}
 	ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
 
 	reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
@@ -376,40 +498,56 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
 	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
 
-	if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-		reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
-	if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-		reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
-	if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
-		reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
-
-	/* Bypass the TLL module for PHY mode operation */
-	if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
-		dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
-		if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ||
-			(omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ||
-				(omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY))
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-		else
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
-	} else {
-		dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
-		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-		else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-
-		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-		else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-
-		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)
-			reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
-		else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
-			reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+	if (is_omap_ehci_rev1(omap)) {
+		if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+		if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+		if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+			reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+
+		/* Bypass the TLL module for PHY mode operation */
+		if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+			dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
+			if (is_ehci_phy_mode(omap->port_mode[0]) ||
+				is_ehci_phy_mode(omap->port_mode[1]) ||
+					is_ehci_phy_mode(omap->port_mode[2]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+			else
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+		} else {
+			dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
+			if (is_ehci_phy_mode(omap->port_mode[0]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+			else if (is_ehci_tll_mode(omap->port_mode[0]))
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+
+			if (is_ehci_phy_mode(omap->port_mode[1]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+			else if (is_ehci_tll_mode(omap->port_mode[1]))
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+
+			if (is_ehci_phy_mode(omap->port_mode[2]))
+				reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+			else if (is_ehci_tll_mode(omap->port_mode[2]))
+				reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+		}
+	} else if (is_omap_ehci_rev2(omap)) {
+		/* Clear port mode fields for PHY mode*/
+		reg &= ~OMAP4_P1_MODE_CLEAR;
+		reg &= ~OMAP4_P2_MODE_CLEAR;
+
+		if (is_ehci_tll_mode(omap->port_mode[0]))
+			reg |= OMAP4_P1_MODE_TLL;
+		else if (is_ehci_hsic_mode(omap->port_mode[0]))
+			reg |= OMAP4_P1_MODE_HSIC;
 
+		if (is_ehci_tll_mode(omap->port_mode[1]))
+			reg |= OMAP4_P2_MODE_TLL;
+		else if (is_ehci_hsic_mode(omap->port_mode[1]))
+			reg |= OMAP4_P2_MODE_HSIC;
 	}
+
 	ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
 	dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
 
@@ -438,7 +576,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 			tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
 
 		/* Enable UTMI mode for required TLL channels */
-		omap_usb_utmi_init(omap, tll_ch_mask);
+		omap_usb_utmi_init(omap, tll_ch_mask, OMAP_TLL_CHANNEL_COUNT);
 	}
 
 	if (omap->phy_reset) {
@@ -464,6 +602,14 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 	return 0;
 
 err_sys_status:
+	clk_disable(omap->utmi_p2_fck);
+	clk_put(omap->utmi_p2_fck);
+	clk_disable(omap->xclk60mhsp2_ck);
+	clk_put(omap->xclk60mhsp2_ck);
+	clk_disable(omap->utmi_p1_fck);
+	clk_put(omap->utmi_p1_fck);
+	clk_disable(omap->xclk60mhsp1_ck);
+	clk_put(omap->xclk60mhsp1_ck);
 	clk_disable(omap->usbtll_ick);
 	clk_put(omap->usbtll_ick);
 
@@ -472,8 +618,8 @@ err_tll_ick:
 	clk_put(omap->usbtll_fck);
 
 err_tll_fck:
-	clk_disable(omap->usbhost1_48m_fck);
-	clk_put(omap->usbhost1_48m_fck);
+	clk_disable(omap->usbhost_fs_fck);
+	clk_put(omap->usbhost_fs_fck);
 
 	if (omap->phy_reset) {
 		if (gpio_is_valid(omap->reset_gpio_port[0]))
@@ -484,8 +630,8 @@ err_tll_fck:
 	}
 
 err_host_48m_fck:
-	clk_disable(omap->usbhost2_120m_fck);
-	clk_put(omap->usbhost2_120m_fck);
+	clk_disable(omap->usbhost_hs_fck);
+	clk_put(omap->usbhost_hs_fck);
 
 err_host_120m_fck:
 	clk_disable(omap->usbhost_ick);
@@ -503,6 +649,8 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 
 	/* Reset OMAP modules for insmod/rmmod to work */
 	ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+			is_omap_ehci_rev2(omap) ?
+			OMAP4_UHH_SYSCONFIG_SOFTRESET :
 			OMAP_UHH_SYSCONFIG_SOFTRESET);
 	while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
 				& (1 << 0))) {
@@ -550,16 +698,16 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 		omap->usbhost_ick = NULL;
 	}
 
-	if (omap->usbhost1_48m_fck != NULL) {
-		clk_disable(omap->usbhost1_48m_fck);
-		clk_put(omap->usbhost1_48m_fck);
-		omap->usbhost1_48m_fck = NULL;
+	if (omap->usbhost_fs_fck != NULL) {
+		clk_disable(omap->usbhost_fs_fck);
+		clk_put(omap->usbhost_fs_fck);
+		omap->usbhost_fs_fck = NULL;
 	}
 
-	if (omap->usbhost2_120m_fck != NULL) {
-		clk_disable(omap->usbhost2_120m_fck);
-		clk_put(omap->usbhost2_120m_fck);
-		omap->usbhost2_120m_fck = NULL;
+	if (omap->usbhost_hs_fck != NULL) {
+		clk_disable(omap->usbhost_hs_fck);
+		clk_put(omap->usbhost_hs_fck);
+		omap->usbhost_hs_fck = NULL;
 	}
 
 	if (omap->usbtll_ick != NULL) {
@@ -568,6 +716,32 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
 		omap->usbtll_ick = NULL;
 	}
 
+	if (is_omap_ehci_rev2(omap)) {
+		if (omap->xclk60mhsp1_ck != NULL) {
+			clk_disable(omap->xclk60mhsp1_ck);
+			clk_put(omap->xclk60mhsp1_ck);
+			omap->xclk60mhsp1_ck = NULL;
+		}
+
+		if (omap->utmi_p1_fck != NULL) {
+			clk_disable(omap->utmi_p1_fck);
+			clk_put(omap->utmi_p1_fck);
+			omap->utmi_p1_fck = NULL;
+		}
+
+		if (omap->xclk60mhsp2_ck != NULL) {
+			clk_disable(omap->xclk60mhsp2_ck);
+			clk_put(omap->xclk60mhsp2_ck);
+			omap->xclk60mhsp2_ck = NULL;
+		}
+
+		if (omap->utmi_p2_fck != NULL) {
+			clk_disable(omap->utmi_p2_fck);
+			clk_put(omap->utmi_p2_fck);
+			omap->utmi_p2_fck = NULL;
+		}
+	}
+
 	if (omap->phy_reset) {
 		if (gpio_is_valid(omap->reset_gpio_port[0]))
 			gpio_free(omap->reset_gpio_port[0]);
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index a1e8d273103..76179c39c0e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -22,6 +22,9 @@
 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
 #endif
 
+/* defined here to avoid adding to pci_ids.h for single instance use */
+#define PCI_DEVICE_ID_INTEL_CE4100_USB	0x2e70
+
 /*-------------------------------------------------------------------------*/
 
 /* called after powerup, by probe or system-pm "wakeup" */
@@ -41,6 +44,35 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 	return 0;
 }
 
+static int ehci_quirk_amd_SB800(struct ehci_hcd *ehci)
+{
+	struct pci_dev *amd_smbus_dev;
+	u8 rev = 0;
+
+	amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL);
+	if (!amd_smbus_dev)
+		return 0;
+
+	pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev);
+	if (rev < 0x40) {
+		pci_dev_put(amd_smbus_dev);
+		amd_smbus_dev = NULL;
+		return 0;
+	}
+
+	if (!amd_nb_dev)
+		amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL);
+	if (!amd_nb_dev)
+		ehci_err(ehci, "QUIRK: unable to get AMD NB device\n");
+
+	ehci_info(ehci, "QUIRK: Enable AMD SB800 L1 fix\n");
+
+	pci_dev_put(amd_smbus_dev);
+	amd_smbus_dev = NULL;
+
+	return 1;
+}
+
 /* called during probe() after chip reset completes */
 static int ehci_pci_setup(struct usb_hcd *hcd)
 {
@@ -99,10 +131,26 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
+	if (ehci_quirk_amd_SB800(ehci))
+		ehci->amd_l1_fix = 1;
+
 	retval = ehci_halt(ehci);
 	if (retval)
 		return retval;
 
+	if ((pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x7808) ||
+	    (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->device == 0x4396)) {
+		/* EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may
+		 * read/write memory space which does not belong to it when
+		 * there is NULL pointer with T-bit set to 1 in the frame list
+		 * table. To avoid the issue, the frame list link pointer
+		 * should always contain a valid pointer to a inactive qh.
+		 */
+		ehci->use_dummy_qh = 1;
+		ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI "
+				"dummy qh workaround\n");
+	}
+
 	/* data structure init */
 	retval = ehci_init(hcd);
 	if (retval)
@@ -124,6 +172,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			ehci_info(ehci, "disable lpm for langwell/penwell\n");
 			ehci->has_lpm = 0;
 		}
+		if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB) {
+			hcd->has_tt = 1;
+			tdi_reset(ehci);
+		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
@@ -148,6 +200,18 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			if (pdev->revision < 0xa4)
 				ehci->no_selective_suspend = 1;
 			break;
+
+		/* MCP89 chips on the MacBookAir3,1 give EPROTO when
+		 * fetching device descriptors unless LPM is disabled.
+		 * There are also intermittent problems enumerating
+		 * devices with PPCD enabled.
+		 */
+		case 0x0d9d:
+			ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
+			ehci->has_lpm = 0;
+			ehci->has_ppcd = 0;
+			ehci->command &= ~CMD_PPCEE;
+			break;
 		}
 		break;
 	case PCI_VENDOR_ID_VIA:
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index a92526d6e5a..aa46f57f9ec 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -98,7 +98,14 @@ static void periodic_unlink (struct ehci_hcd *ehci, unsigned frame, void *ptr)
 	 */
 	*prev_p = *periodic_next_shadow(ehci, &here,
 			Q_NEXT_TYPE(ehci, *hw_p));
-	*hw_p = *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p));
+
+	if (!ehci->use_dummy_qh ||
+	    *shadow_next_periodic(ehci, &here, Q_NEXT_TYPE(ehci, *hw_p))
+			!= EHCI_LIST_END(ehci))
+		*hw_p = *shadow_next_periodic(ehci, &here,
+				Q_NEXT_TYPE(ehci, *hw_p));
+	else
+		*hw_p = ehci->dummy->qh_dma;
 }
 
 /* how many of the uframe's 125 usecs are allocated? */
@@ -1583,6 +1590,63 @@ itd_link (struct ehci_hcd *ehci, unsigned frame, struct ehci_itd *itd)
 	*hw_p = cpu_to_hc32(ehci, itd->itd_dma | Q_TYPE_ITD);
 }
 
+#define AB_REG_BAR_LOW 0xe0
+#define AB_REG_BAR_HIGH 0xe1
+#define AB_INDX(addr) ((addr) + 0x00)
+#define AB_DATA(addr) ((addr) + 0x04)
+#define NB_PCIE_INDX_ADDR 0xe0
+#define NB_PCIE_INDX_DATA 0xe4
+#define NB_PIF0_PWRDOWN_0 0x01100012
+#define NB_PIF0_PWRDOWN_1 0x01100013
+
+static void ehci_quirk_amd_L1(struct ehci_hcd *ehci, int disable)
+{
+	u32 addr, addr_low, addr_high, val;
+
+	outb_p(AB_REG_BAR_LOW, 0xcd6);
+	addr_low = inb_p(0xcd7);
+	outb_p(AB_REG_BAR_HIGH, 0xcd6);
+	addr_high = inb_p(0xcd7);
+	addr = addr_high << 8 | addr_low;
+	outl_p(0x30, AB_INDX(addr));
+	outl_p(0x40, AB_DATA(addr));
+	outl_p(0x34, AB_INDX(addr));
+	val = inl_p(AB_DATA(addr));
+
+	if (disable) {
+		val &= ~0x8;
+		val |= (1 << 4) | (1 << 9);
+	} else {
+		val |= 0x8;
+		val &= ~((1 << 4) | (1 << 9));
+	}
+	outl_p(val, AB_DATA(addr));
+
+	if (amd_nb_dev) {
+		addr = NB_PIF0_PWRDOWN_0;
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val);
+		if (disable)
+			val &= ~(0x3f << 7);
+		else
+			val |= 0x3f << 7;
+
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val);
+
+		addr = NB_PIF0_PWRDOWN_1;
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr);
+		pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val);
+		if (disable)
+			val &= ~(0x3f << 7);
+		else
+			val |= 0x3f << 7;
+
+		pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val);
+	}
+
+	return;
+}
+
 /* fit urb's itds into the selected schedule slot; activate as needed */
 static int
 itd_link_urb (
@@ -1609,6 +1673,12 @@ itd_link_urb (
 			urb->interval,
 			next_uframe >> 3, next_uframe & 0x7);
 	}
+
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 1);
+	}
+
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
 
 	/* fill iTDs uframe by uframe */
@@ -1733,6 +1803,11 @@ itd_complete (
 	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 0);
+	}
+
 	if (unlikely(list_is_singular(&stream->td_list))) {
 		ehci_to_hcd(ehci)->self.bandwidth_allocated
 				-= stream->bandwidth;
@@ -2018,6 +2093,12 @@ sitd_link_urb (
 			(next_uframe >> 3) & (ehci->periodic_size - 1),
 			stream->interval, hc32_to_cpu(ehci, stream->splits));
 	}
+
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 1);
+	}
+
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++;
 
 	/* fill sITDs frame by frame */
@@ -2118,6 +2199,11 @@ sitd_complete (
 	(void) disable_periodic(ehci);
 	ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--;
 
+	if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) {
+		if (ehci->amd_l1_fix == 1)
+			ehci_quirk_amd_L1(ehci, 0);
+	}
+
 	if (list_is_singular(&stream->td_list)) {
 		ehci_to_hcd(ehci)->self.bandwidth_allocated
 				-= stream->bandwidth;
@@ -2335,7 +2421,11 @@ restart:
 				 * pointer for much longer, if at all.
 				 */
 				*q_p = q.itd->itd_next;
-				*hw_p = q.itd->hw_next;
+				if (!ehci->use_dummy_qh ||
+				    q.itd->hw_next != EHCI_LIST_END(ehci))
+					*hw_p = q.itd->hw_next;
+				else
+					*hw_p = ehci->dummy->qh_dma;
 				type = Q_NEXT_TYPE(ehci, q.itd->hw_next);
 				wmb();
 				modified = itd_complete (ehci, q.itd);
@@ -2368,7 +2458,11 @@ restart:
 				 * URB completion.
 				 */
 				*q_p = q.sitd->sitd_next;
-				*hw_p = q.sitd->hw_next;
+				if (!ehci->use_dummy_qh ||
+				    q.sitd->hw_next != EHCI_LIST_END(ehci))
+					*hw_p = q.sitd->hw_next;
+				else
+					*hw_p = ehci->dummy->qh_dma;
 				type = Q_NEXT_TYPE(ehci, q.sitd->hw_next);
 				wmb();
 				modified = sitd_complete (ehci, q.sitd);
diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c
new file mode 100644
index 00000000000..595f70f42b5
--- /dev/null
+++ b/drivers/usb/host/ehci-sh.c
@@ -0,0 +1,243 @@
+/*
+ * SuperH EHCI host controller driver
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * Based on ohci-sh.c and ehci-atmel.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+struct ehci_sh_priv {
+	struct clk *iclk, *fclk;
+	struct usb_hcd *hcd;
+};
+
+static int ehci_sh_reset(struct usb_hcd *hcd)
+{
+	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	int ret;
+
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci,
+		&ehci->caps->hc_capbase));
+
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+	ret = ehci_halt(ehci);
+	if (unlikely(ret))
+		return ret;
+
+	ret = ehci_init(hcd);
+	if (unlikely(ret))
+		return ret;
+
+	ehci->sbrn = 0x20;
+
+	ehci_reset(ehci);
+	ehci_port_power(ehci, 0);
+
+	return ret;
+}
+
+static const struct hc_driver ehci_sh_hc_driver = {
+	.description			= hcd_name,
+	.product_desc			= "SuperH EHCI",
+	.hcd_priv_size			= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq				= ehci_irq,
+	.flags				= HCD_USB2 | HCD_MEMORY,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset				= ehci_sh_reset,
+	.start				= ehci_run,
+	.stop				= ehci_stop,
+	.shutdown			= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue			= ehci_urb_enqueue,
+	.urb_dequeue			= ehci_urb_dequeue,
+	.endpoint_disable		= ehci_endpoint_disable,
+	.endpoint_reset			= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number		= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data		= ehci_hub_status_data,
+	.hub_control			= ehci_hub_control,
+
+#ifdef CONFIG_PM
+	.bus_suspend			= ehci_bus_suspend,
+	.bus_resume			= ehci_bus_resume,
+#endif
+
+	.relinquish_port		= ehci_relinquish_port,
+	.port_handed_over		= ehci_port_handed_over,
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int ehci_hcd_sh_probe(struct platform_device *pdev)
+{
+	const struct hc_driver *driver = &ehci_sh_hc_driver;
+	struct resource *res;
+	struct ehci_sh_priv *priv;
+	struct usb_hcd *hcd;
+	int irq, ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev,
+			"Found HC with no register addr. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		ret = -ENODEV;
+		goto fail_create_hcd;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq <= 0) {
+		dev_err(&pdev->dev,
+			"Found HC with no IRQ. Check %s setup!\n",
+			dev_name(&pdev->dev));
+		ret = -ENODEV;
+		goto fail_create_hcd;
+	}
+
+	/* initialize hcd */
+	hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev,
+			     dev_name(&pdev->dev));
+	if (!hcd) {
+		ret = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		dev_dbg(&pdev->dev, "controller already in use\n");
+		ret = -EBUSY;
+		goto fail_request_resource;
+	}
+
+	hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		ret = -ENXIO;
+		goto fail_ioremap;
+	}
+
+	priv = kmalloc(sizeof(struct ehci_sh_priv), GFP_KERNEL);
+	if (!priv) {
+		dev_dbg(&pdev->dev, "error allocating priv data\n");
+		ret = -ENOMEM;
+		goto fail_alloc;
+	}
+
+	/* These are optional, we don't care if they fail */
+	priv->fclk = clk_get(&pdev->dev, "usb_fck");
+	if (IS_ERR(priv->fclk))
+		priv->fclk = NULL;
+
+	priv->iclk = clk_get(&pdev->dev, "usb_ick");
+	if (IS_ERR(priv->iclk))
+		priv->iclk = NULL;
+
+	clk_enable(priv->fclk);
+	clk_enable(priv->iclk);
+
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "Failed to add hcd");
+		goto fail_add_hcd;
+	}
+
+	priv->hcd = hcd;
+	platform_set_drvdata(pdev, priv);
+
+	return ret;
+
+fail_add_hcd:
+	clk_disable(priv->iclk);
+	clk_disable(priv->fclk);
+
+	clk_put(priv->iclk);
+	clk_put(priv->fclk);
+
+	kfree(priv);
+fail_alloc:
+	iounmap(hcd->regs);
+fail_ioremap:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), ret);
+
+	return ret;
+}
+
+static int __exit ehci_hcd_sh_remove(struct platform_device *pdev)
+{
+	struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = priv->hcd;
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	platform_set_drvdata(pdev, NULL);
+
+	clk_disable(priv->fclk);
+	clk_disable(priv->iclk);
+
+	clk_put(priv->fclk);
+	clk_put(priv->iclk);
+
+	kfree(priv);
+
+	return 0;
+}
+
+static void ehci_hcd_sh_shutdown(struct platform_device *pdev)
+{
+	struct ehci_sh_priv *priv = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = priv->hcd;
+
+	if (hcd->driver->shutdown)
+		hcd->driver->shutdown(hcd);
+}
+
+static struct platform_driver ehci_hcd_sh_driver = {
+	.probe		= ehci_hcd_sh_probe,
+	.remove		= __exit_p(ehci_hcd_sh_remove),
+	.shutdown	= ehci_hcd_sh_shutdown,
+	.driver		= {
+		.name	= "sh_ehci",
+		.owner	= THIS_MODULE,
+	},
+};
+
+MODULE_ALIAS("platform:sh_ehci");
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
new file mode 100644
index 00000000000..75c00873443
--- /dev/null
+++ b/drivers/usb/host/ehci-spear.c
@@ -0,0 +1,212 @@
+/*
+* Driver for EHCI HCD on SPEAR SOC
+*
+* Copyright (C) 2010 ST Micro Electronics,
+* Deepak Sikri <deepak.sikri@st.com>
+*
+* Based on various ehci-*.c drivers
+*
+* This file is subject to the terms and conditions of the GNU General Public
+* License. See the file COPYING in the main directory of this archive for
+* more details.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+struct spear_ehci {
+	struct ehci_hcd ehci;
+	struct clk *clk;
+};
+
+#define to_spear_ehci(hcd)	(struct spear_ehci *)hcd_to_ehci(hcd)
+
+static void spear_start_ehci(struct spear_ehci *ehci)
+{
+	clk_enable(ehci->clk);
+}
+
+static void spear_stop_ehci(struct spear_ehci *ehci)
+{
+	clk_disable(ehci->clk);
+}
+
+static int ehci_spear_setup(struct usb_hcd *hcd)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int retval = 0;
+
+	/* registers start at offset 0x0 */
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci,
+				&ehci->caps->hc_capbase));
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+	retval = ehci_halt(ehci);
+	if (retval)
+		return retval;
+
+	retval = ehci_init(hcd);
+	if (retval)
+		return retval;
+
+	ehci_reset(ehci);
+	ehci_port_power(ehci, 0);
+
+	return retval;
+}
+
+static const struct hc_driver ehci_spear_hc_driver = {
+	.description			= hcd_name,
+	.product_desc			= "SPEAr EHCI",
+	.hcd_priv_size			= sizeof(struct spear_ehci),
+
+	/* generic hardware linkage */
+	.irq				= ehci_irq,
+	.flags				= HCD_MEMORY | HCD_USB2,
+
+	/* basic lifecycle operations */
+	.reset				= ehci_spear_setup,
+	.start				= ehci_run,
+	.stop				= ehci_stop,
+	.shutdown			= ehci_shutdown,
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue			= ehci_urb_enqueue,
+	.urb_dequeue			= ehci_urb_dequeue,
+	.endpoint_disable		= ehci_endpoint_disable,
+	.endpoint_reset			= ehci_endpoint_reset,
+
+	/* scheduling support */
+	.get_frame_number		= ehci_get_frame,
+
+	/* root hub support */
+	.hub_status_data		= ehci_hub_status_data,
+	.hub_control			= ehci_hub_control,
+	.bus_suspend			= ehci_bus_suspend,
+	.bus_resume			= ehci_bus_resume,
+	.relinquish_port		= ehci_relinquish_port,
+	.port_handed_over		= ehci_port_handed_over,
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd ;
+	struct spear_ehci *ehci;
+	struct resource *res;
+	struct clk *usbh_clk;
+	const struct hc_driver *driver = &ehci_spear_hc_driver;
+	int *pdata = pdev->dev.platform_data;
+	int irq, retval;
+	char clk_name[20] = "usbh_clk";
+
+	if (pdata == NULL)
+		return -EFAULT;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		retval = irq;
+		goto fail_irq_get;
+	}
+
+	if (*pdata >= 0)
+		sprintf(clk_name, "usbh.%01d_clk", *pdata);
+
+	usbh_clk = clk_get(NULL, clk_name);
+	if (IS_ERR(usbh_clk)) {
+		dev_err(&pdev->dev, "Error getting interface clock\n");
+		retval = PTR_ERR(usbh_clk);
+		goto fail_get_usbh_clk;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		retval = -ENODEV;
+		goto fail_request_resource;
+	}
+
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+				driver->description)) {
+		retval = -EBUSY;
+		goto fail_request_resource;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (hcd->regs == NULL) {
+		dev_dbg(&pdev->dev, "error mapping memory\n");
+		retval = -ENOMEM;
+		goto fail_ioremap;
+	}
+
+	ehci = (struct spear_ehci *)hcd_to_ehci(hcd);
+	ehci->clk = usbh_clk;
+
+	spear_start_ehci(ehci);
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+	if (retval)
+		goto fail_add_hcd;
+
+	return retval;
+
+fail_add_hcd:
+	spear_stop_ehci(ehci);
+	iounmap(hcd->regs);
+fail_ioremap:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	clk_put(usbh_clk);
+fail_get_usbh_clk:
+fail_irq_get:
+	dev_err(&pdev->dev, "init fail, %d\n", retval);
+
+	return retval ;
+}
+
+static int spear_ehci_hcd_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct spear_ehci *ehci_p = to_spear_ehci(hcd);
+
+	if (!hcd)
+		return 0;
+	if (in_interrupt())
+		BUG();
+	usb_remove_hcd(hcd);
+
+	if (ehci_p->clk)
+		spear_stop_ehci(ehci_p);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+
+	if (ehci_p->clk)
+		clk_put(ehci_p->clk);
+
+	return 0;
+}
+
+static struct platform_driver spear_ehci_hcd_driver = {
+	.probe		= spear_ehci_hcd_drv_probe,
+	.remove		= spear_ehci_hcd_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver		= {
+		.name = "spear-ehci",
+		.bus = &platform_bus_type
+	}
+};
+
+MODULE_ALIAS("platform:spear-ehci");
diff --git a/drivers/usb/host/ehci-vt8500.c b/drivers/usb/host/ehci-vt8500.c
new file mode 100644
index 00000000000..20168062035
--- /dev/null
+++ b/drivers/usb/host/ehci-vt8500.c
@@ -0,0 +1,172 @@
+/*
+ * drivers/usb/host/ehci-vt8500.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on ehci-au1xxx.c
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+static int ehci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	int rc = 0;
+
+	if (!udev->parent) /* udev is root hub itself, impossible */
+		rc = -1;
+	/* we only support lpm device connected to root hub yet */
+	if (ehci->has_lpm && !udev->parent->parent) {
+		rc = ehci_lpm_set_da(ehci, udev->devnum, udev->portnum);
+		if (!rc)
+			rc = ehci_lpm_check(ehci, udev->portnum);
+	}
+	return rc;
+}
+
+static const struct hc_driver vt8500_ehci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "VT8500 EHCI",
+	.hcd_priv_size		= sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq			= ehci_irq,
+	.flags			= HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset			= ehci_init,
+	.start			= ehci_run,
+	.stop			= ehci_stop,
+	.shutdown		= ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue		= ehci_urb_enqueue,
+	.urb_dequeue		= ehci_urb_dequeue,
+	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number	= ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data	= ehci_hub_status_data,
+	.hub_control		= ehci_hub_control,
+	.bus_suspend		= ehci_bus_suspend,
+	.bus_resume		= ehci_bus_resume,
+	.relinquish_port	= ehci_relinquish_port,
+	.port_handed_over	= ehci_port_handed_over,
+
+	/*
+	 * call back when device connected and addressed
+	 */
+	.update_device =	ehci_update_device,
+
+	.clear_tt_buffer_complete	= ehci_clear_tt_buffer_complete,
+};
+
+static int vt8500_ehci_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+	struct resource *res;
+	int ret;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	if (pdev->resource[1].flags != IORESOURCE_IRQ) {
+		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		return -ENOMEM;
+	}
+	hcd = usb_create_hcd(&vt8500_ehci_hc_driver, &pdev->dev, "VT8500");
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = resource_size(res);
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		pr_debug("request_mem_region failed");
+		ret = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		pr_debug("ioremap failed");
+		ret = -ENOMEM;
+		goto err2;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
+
+	dbg_hcs_params(ehci, "reset");
+	dbg_hcc_params(ehci, "reset");
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = readl(&ehci->caps->hcs_params);
+
+	ehci_port_power(ehci, 1);
+
+	ret = usb_add_hcd(hcd, pdev->resource[1].start,
+			  IRQF_DISABLED | IRQF_SHARED);
+	if (ret == 0) {
+		platform_set_drvdata(pdev, hcd);
+		return ret;
+	}
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+	return ret;
+}
+
+static int vt8500_ehci_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver vt8500_ehci_driver = {
+	.probe		= vt8500_ehci_drv_probe,
+	.remove		= vt8500_ehci_drv_remove,
+	.shutdown	= usb_hcd_platform_shutdown,
+	.driver = {
+		.name	= "vt8500-ehci",
+		.owner	= THIS_MODULE,
+	}
+};
+
+MODULE_ALIAS("platform:vt8500-ehci");
diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c
index cfa21ea20f8..6bc35809a5c 100644
--- a/drivers/usb/host/ehci-w90x900.c
+++ b/drivers/usb/host/ehci-w90x900.c
@@ -130,6 +130,7 @@ static const struct hc_driver ehci_w90x900_hc_driver = {
 	.urb_enqueue = ehci_urb_enqueue,
 	.urb_dequeue = ehci_urb_dequeue,
 	.endpoint_disable = ehci_endpoint_disable,
+	.endpoint_reset = ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
@@ -147,6 +148,8 @@ static const struct hc_driver ehci_w90x900_hc_driver = {
 #endif
 	.relinquish_port	= ehci_relinquish_port,
 	.port_handed_over	= ehci_port_handed_over,
+
+	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 };
 
 static int __devinit ehci_w90x900_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c
index 6c8076ad821..e8f4f36fdf0 100644
--- a/drivers/usb/host/ehci-xilinx-of.c
+++ b/drivers/usb/host/ehci-xilinx-of.c
@@ -117,6 +117,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = {
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
 	.endpoint_disable	= ehci_endpoint_disable,
+	.endpoint_reset		= ehci_endpoint_reset,
 
 	/*
 	 * scheduling support
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bde823f704e..799ac16a54b 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -73,6 +73,7 @@ struct ehci_hcd {			/* one per controller */
 
 	/* async schedule support */
 	struct ehci_qh		*async;
+	struct ehci_qh		*dummy;		/* For AMD quirk use */
 	struct ehci_qh		*reclaim;
 	unsigned		scanning : 1;
 
@@ -130,7 +131,9 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		has_amcc_usb23:1;
 	unsigned		need_io_watchdog:1;
 	unsigned		broken_periodic:1;
+	unsigned		amd_l1_fix:1;
 	unsigned		fs_i_thresh:1;	/* Intel iso scheduling */
+	unsigned		use_dummy_qh:1;	/* AMD Frame List table quirk*/
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 8196fa11fec..43a39eb56cc 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -70,7 +70,6 @@
 #include <linux/ioport.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/list.h>
@@ -2684,7 +2683,7 @@ static int __devexit isp1362_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __init isp1362_probe(struct platform_device *pdev)
+static int __devinit isp1362_probe(struct platform_device *pdev)
 {
 	struct usb_hcd *hcd;
 	struct isp1362_hcd *isp1362_hcd;
diff --git a/drivers/usb/host/ohci-cns3xxx.c b/drivers/usb/host/ohci-cns3xxx.c
new file mode 100644
index 00000000000..f05ef87e934
--- /dev/null
+++ b/drivers/usb/host/ohci-cns3xxx.c
@@ -0,0 +1,165 @@
+/*
+ * Copyright 2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/atomic.h>
+#include <mach/cns3xxx.h>
+#include <mach/pm.h>
+
+static int __devinit
+cns3xxx_ohci_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 *
+	 * Set USB AHB INCR length to 16
+	 */
+	if (atomic_inc_return(&usb_pwr_ref) == 1) {
+		cns3xxx_pwr_power_up(1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_PLL_USB);
+		cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+		cns3xxx_pwr_soft_rst(1 << PM_SOFT_RST_REG_OFFST_USB_HOST);
+		__raw_writel((__raw_readl(MISC_CHIP_CONFIG_REG) | (0X2 << 24)),
+			MISC_CHIP_CONFIG_REG);
+	}
+
+	ret = ohci_init(ohci);
+	if (ret < 0)
+		return ret;
+
+	ohci->num_ports = 1;
+
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		err("can't start %s", hcd->self.bus_name);
+		ohci_stop(hcd);
+		return ret;
+	}
+	return 0;
+}
+
+static const struct hc_driver cns3xxx_ohci_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "CNS3XXX OHCI Host controller",
+	.hcd_priv_size		= sizeof(struct ohci_hcd),
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+	.start			= cns3xxx_ohci_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+	.get_frame_number	= ohci_get_frame,
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+#ifdef CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+static int cns3xxx_ohci_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct usb_hcd *hcd;
+	const struct hc_driver *driver = &cns3xxx_ohci_hc_driver;
+	struct resource *res;
+	int irq;
+	int retval;
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no IRQ.\n");
+		return -ENODEV;
+	}
+	irq = res->start;
+
+	hcd = usb_create_hcd(driver, dev, dev_name(dev));
+	if (!hcd)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "Found HC with no register addr.\n");
+		retval = -ENODEV;
+		goto err1;
+	}
+	hcd->rsrc_start = res->start;
+	hcd->rsrc_len = res->end - res->start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+			driver->description)) {
+		dev_dbg(dev, "controller already in use\n");
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_dbg(dev, "error mapping memory\n");
+		retval = -EFAULT;
+		goto err2;
+	}
+
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+	if (retval == 0)
+		return retval;
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+static int cns3xxx_ohci_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+	/*
+	 * EHCI and OHCI share the same clock and power,
+	 * resetting twice would cause the 1st controller been reset.
+	 * Therefore only do power up  at the first up device, and
+	 * power down at the last down device.
+	 */
+	if (atomic_dec_return(&usb_pwr_ref) == 0)
+		cns3xxx_pwr_clk_dis(1 << PM_CLK_GATE_REG_OFFSET_USB_HOST);
+
+	usb_put_hcd(hcd);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+MODULE_ALIAS("platform:cns3xxx-ohci");
+
+static struct platform_driver ohci_hcd_cns3xxx_driver = {
+	.probe = cns3xxx_ohci_probe,
+	.remove = cns3xxx_ohci_remove,
+	.driver = {
+		.name = "cns3xxx-ohci",
+	},
+};
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 5179acb7aa2..759a12ff804 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -901,7 +901,8 @@ static void ohci_stop (struct usb_hcd *hcd)
 
 	ohci_dump (ohci, 1);
 
-	flush_scheduled_work();
+	if (quirk_nec(ohci))
+		flush_work_sync(&ohci->nec_work);
 
 	ohci_usb_reset (ohci);
 	ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
@@ -1081,6 +1082,11 @@ MODULE_LICENSE ("GPL");
 #define OF_PLATFORM_DRIVER	ohci_hcd_ppc_of_driver
 #endif
 
+#ifdef CONFIG_PLAT_SPEAR
+#include "ohci-spear.c"
+#define PLATFORM_DRIVER		spear_ohci_hcd_driver
+#endif
+
 #ifdef CONFIG_PPC_PS3
 #include "ohci-ps3.c"
 #define PS3_SYSTEM_BUS_DRIVER	ps3_ohci_driver
@@ -1111,6 +1117,11 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_octeon_driver
 #endif
 
+#ifdef CONFIG_USB_CNS3XXX_OHCI
+#include "ohci-cns3xxx.c"
+#define PLATFORM_DRIVER		ohci_hcd_cns3xxx_driver
+#endif
+
 #if	!defined(PCI_DRIVER) &&		\
 	!defined(PLATFORM_DRIVER) &&	\
 	!defined(OMAP1_PLATFORM_DRIVER) &&	\
diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c
index 10e1872f3ab..931d588c3fb 100644
--- a/drivers/usb/host/ohci-jz4740.c
+++ b/drivers/usb/host/ohci-jz4740.c
@@ -273,4 +273,4 @@ static struct platform_driver ohci_hcd_jz4740_driver = {
 	},
 };
 
-MODULE_ALIAS("platfrom:jz4740-ohci");
+MODULE_ALIAS("platform:jz4740-ohci");
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 2cc8a504b18..a37d5993e4e 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -648,7 +648,7 @@ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev)
 
 	ret = omap3_start_ohci(omap, hcd);
 	if (ret) {
-		dev_dbg(&pdev->dev, "failed to start ehci\n");
+		dev_dbg(&pdev->dev, "failed to start ohci\n");
 		goto err_start;
 	}
 
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index 0b35d22cc70..f47867ff78c 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -109,7 +109,7 @@ static int ohci_hcd_sh_probe(struct platform_device *pdev)
 	hcd->regs = (void __iomem *)res->start;
 	hcd->rsrc_start = res->start;
 	hcd->rsrc_len = resource_size(res);
-	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
+	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 	if (ret != 0) {
 		err("Failed to add hcd");
 		usb_put_hcd(hcd);
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
new file mode 100644
index 00000000000..4fd4bea9ac7
--- /dev/null
+++ b/drivers/usb/host/ohci-spear.c
@@ -0,0 +1,240 @@
+/*
+* OHCI HCD (Host Controller Driver) for USB.
+*
+* Copyright (C) 2010 ST Microelectronics.
+* Deepak Sikri<deepak.sikri@st.com>
+*
+* Based on various ohci-*.c drivers
+*
+* This file is licensed under the terms of the GNU General Public
+* License version 2. This program is licensed "as is" without any
+* warranty of any kind, whether express or implied.
+*/
+
+#include <linux/signal.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+struct spear_ohci {
+	struct ohci_hcd ohci;
+	struct clk *clk;
+};
+
+#define to_spear_ohci(hcd)	(struct spear_ohci *)hcd_to_ohci(hcd)
+
+static void spear_start_ohci(struct spear_ohci *ohci)
+{
+	clk_enable(ohci->clk);
+}
+
+static void spear_stop_ohci(struct spear_ohci *ohci)
+{
+	clk_disable(ohci->clk);
+}
+
+static int __devinit ohci_spear_start(struct usb_hcd *hcd)
+{
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+	int ret;
+
+	ret = ohci_init(ohci);
+	if (ret < 0)
+		return ret;
+	ohci->regs = hcd->regs;
+
+	ret = ohci_run(ohci);
+	if (ret < 0) {
+		dev_err(hcd->self.controller, "can't start\n");
+		ohci_stop(hcd);
+		return ret;
+	}
+
+	create_debug_files(ohci);
+
+#ifdef DEBUG
+	ohci_dump(ohci, 1);
+#endif
+	return 0;
+}
+
+static const struct hc_driver ohci_spear_hc_driver = {
+	.description		= hcd_name,
+	.product_desc		= "SPEAr OHCI",
+	.hcd_priv_size		= sizeof(struct spear_ohci),
+
+	/* generic hardware linkage */
+	.irq			= ohci_irq,
+	.flags			= HCD_USB11 | HCD_MEMORY,
+
+	/* basic lifecycle operations */
+	.start			= ohci_spear_start,
+	.stop			= ohci_stop,
+	.shutdown		= ohci_shutdown,
+#ifdef	CONFIG_PM
+	.bus_suspend		= ohci_bus_suspend,
+	.bus_resume		= ohci_bus_resume,
+#endif
+
+	/* managing i/o requests and associated device resources */
+	.urb_enqueue		= ohci_urb_enqueue,
+	.urb_dequeue		= ohci_urb_dequeue,
+	.endpoint_disable	= ohci_endpoint_disable,
+
+	/* scheduling support */
+	.get_frame_number	= ohci_get_frame,
+
+	/* root hub support */
+	.hub_status_data	= ohci_hub_status_data,
+	.hub_control		= ohci_hub_control,
+
+	.start_port_reset	= ohci_start_port_reset,
+};
+
+static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
+{
+	const struct hc_driver *driver = &ohci_spear_hc_driver;
+	struct usb_hcd *hcd = NULL;
+	struct clk *usbh_clk;
+	struct spear_ohci *ohci_p;
+	struct resource *res;
+	int retval, irq;
+	int *pdata = pdev->dev.platform_data;
+	char clk_name[20] = "usbh_clk";
+
+	if (pdata == NULL)
+		return -EFAULT;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		retval = irq;
+		goto fail_irq_get;
+	}
+
+	if (*pdata >= 0)
+		sprintf(clk_name, "usbh.%01d_clk", *pdata);
+
+	usbh_clk = clk_get(NULL, clk_name);
+	if (IS_ERR(usbh_clk)) {
+		dev_err(&pdev->dev, "Error getting interface clock\n");
+		retval = PTR_ERR(usbh_clk);
+		goto fail_get_usbh_clk;
+	}
+
+	hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+	if (!hcd) {
+		retval = -ENOMEM;
+		goto fail_create_hcd;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		retval = -ENODEV;
+		goto fail_request_resource;
+	}
+
+	hcd->rsrc_start = pdev->resource[0].start;
+	hcd->rsrc_len = resource_size(res);
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		dev_dbg(&pdev->dev, "request_mem_region failed\n");
+		retval = -EBUSY;
+		goto fail_request_resource;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		dev_dbg(&pdev->dev, "ioremap failed\n");
+		retval = -ENOMEM;
+		goto fail_ioremap;
+	}
+
+	ohci_p = (struct spear_ohci *)hcd_to_ohci(hcd);
+	ohci_p->clk = usbh_clk;
+	spear_start_ohci(ohci_p);
+	ohci_hcd_init(hcd_to_ohci(hcd));
+
+	retval = usb_add_hcd(hcd, platform_get_irq(pdev, 0), IRQF_DISABLED);
+	if (retval == 0)
+		return retval;
+
+	spear_stop_ohci(ohci_p);
+	iounmap(hcd->regs);
+fail_ioremap:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+	usb_put_hcd(hcd);
+fail_create_hcd:
+	clk_put(usbh_clk);
+fail_get_usbh_clk:
+fail_irq_get:
+	dev_err(&pdev->dev, "init fail, %d\n", retval);
+
+	return retval;
+}
+
+static int spear_ohci_hcd_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+
+	usb_remove_hcd(hcd);
+	if (ohci_p->clk)
+		spear_stop_ohci(ohci_p);
+
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+
+	if (ohci_p->clk)
+		clk_put(ohci_p->clk);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+#if defined(CONFIG_PM)
+static int spear_ohci_hcd_drv_suspend(struct platform_device *dev,
+		pm_message_t message)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	spear_stop_ohci(ohci_p);
+	ohci_to_hcd(ohci)->state = HC_STATE_SUSPENDED;
+	return 0;
+}
+
+static int spear_ohci_hcd_drv_resume(struct platform_device *dev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(dev);
+	struct ohci_hcd	*ohci = hcd_to_ohci(hcd);
+	struct spear_ohci *ohci_p = to_spear_ohci(hcd);
+
+	if (time_before(jiffies, ohci->next_statechange))
+		msleep(5);
+	ohci->next_statechange = jiffies;
+
+	spear_start_ohci(ohci_p);
+	ohci_finish_controller_resume(hcd);
+	return 0;
+}
+#endif
+
+/* Driver definition to register with the platform bus */
+static struct platform_driver spear_ohci_hcd_driver = {
+	.probe =	spear_ohci_hcd_drv_probe,
+	.remove =	spear_ohci_hcd_drv_remove,
+#ifdef CONFIG_PM
+	.suspend =	spear_ohci_hcd_drv_suspend,
+	.resume =	spear_ohci_hcd_drv_resume,
+#endif
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "spear-ohci",
+	},
+};
+
+MODULE_ALIAS("platform:spear-ohci");
diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c
index 6e7fb5f38db..ee60cd3ea64 100644
--- a/drivers/usb/host/uhci-debug.c
+++ b/drivers/usb/host/uhci-debug.c
@@ -12,7 +12,6 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/debugfs.h>
-#include <linux/smp_lock.h>
 #include <asm/io.h>
 
 #include "uhci-hcd.h"
diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c
index f52d04db28f..cee867829ec 100644
--- a/drivers/usb/host/uhci-hcd.c
+++ b/drivers/usb/host/uhci-hcd.c
@@ -569,7 +569,7 @@ static int uhci_init(struct usb_hcd *hcd)
  */
 static void uhci_shutdown(struct pci_dev *pdev)
 {
-	struct usb_hcd *hcd = (struct usb_hcd *) pci_get_drvdata(pdev);
+	struct usb_hcd *hcd = pci_get_drvdata(pdev);
 
 	uhci_hc_died(hcd_to_uhci(hcd));
 }
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index 2090b45eb60..af77abb5c68 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -29,7 +29,7 @@ static void uhci_set_next_interrupt(struct uhci_hcd *uhci)
 {
 	if (uhci->is_stopped)
 		mod_timer(&uhci_to_hcd(uhci)->rh_timer, jiffies);
-	uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC); 
+	uhci->term_td->status |= cpu_to_le32(TD_CTRL_IOC);
 }
 
 static inline void uhci_clear_next_interrupt(struct uhci_hcd *uhci)
@@ -195,7 +195,9 @@ static inline void uhci_remove_td_from_frame_list(struct uhci_hcd *uhci,
 		} else {
 			struct uhci_td *ntd;
 
-			ntd = list_entry(td->fl_list.next, struct uhci_td, fl_list);
+			ntd = list_entry(td->fl_list.next,
+					 struct uhci_td,
+					 fl_list);
 			uhci->frame[td->frame] = LINK_TO_TD(ntd);
 			uhci->frame_cpu[td->frame] = ntd;
 		}
@@ -728,7 +730,7 @@ static inline struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci,
 
 	urbp->urb = urb;
 	urb->hcpriv = urbp;
-	
+
 	INIT_LIST_HEAD(&urbp->node);
 	INIT_LIST_HEAD(&urbp->td_list);
 
@@ -846,7 +848,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 
 		/* Alternate Data0/1 (start with Data1) */
 		destination ^= TD_TOKEN_TOGGLE;
-	
+
 		uhci_add_td_to_urbp(td, urbp);
 		uhci_fill_td(td, status, destination | uhci_explen(pktsze),
 				data);
@@ -857,7 +859,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb,
 	}
 
 	/*
-	 * Build the final TD for control status 
+	 * Build the final TD for control status
 	 */
 	td = uhci_alloc_td(uhci);
 	if (!td)
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index 72b6892fda6..9546f6cd01f 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -356,7 +356,7 @@ static void __exit whci_hc_driver_exit(void)
 module_exit(whci_hc_driver_exit);
 
 /* PCI device ID's that we handle (so it gets loaded) */
-static struct pci_device_id whci_hcd_id_table[] = {
+static struct pci_device_id __used whci_hcd_id_table[] = {
 	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
 	{ /* empty last entry */ }
 };
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index fef5a1f9d48..5d963e35049 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -229,6 +229,13 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id)
 static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
 		u32 __iomem *addr, u32 port_status)
 {
+	/* Don't allow the USB core to disable SuperSpeed ports. */
+	if (xhci->port_array[wIndex] == 0x03) {
+		xhci_dbg(xhci, "Ignoring request to disable "
+				"SuperSpeed port.\n");
+		return;
+	}
+
 	/* Write 1 to disable the port */
 	xhci_writel(xhci, port_status | PORT_PE, addr);
 	port_status = xhci_readl(xhci, addr);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 202770676da..1d0f45f0e7a 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1045,7 +1045,7 @@ static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
 	if (udev->speed == USB_SPEED_SUPER)
 		return ep->ss_ep_comp.wBytesPerInterval;
 
-	max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+	max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
 	max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
 	/* A 0 in max burst means 1 transfer per ESIT */
 	return max_packet * (max_burst + 1);
@@ -1135,7 +1135,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		/* Fall through */
 	case USB_SPEED_FULL:
 	case USB_SPEED_LOW:
-		max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+		max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
 		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
 		break;
 	default:
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->dcbaa = NULL;
 
 	scratchpad_free(xhci);
+
+	xhci->num_usb2_ports = 0;
+	xhci->num_usb3_ports = 0;
+	kfree(xhci->usb2_ports);
+	kfree(xhci->usb3_ports);
+	kfree(xhci->port_array);
+
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
 	xhci->bus_suspended = 0;
@@ -1627,6 +1634,166 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
 			&xhci->ir_set->erst_dequeue);
 }
 
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+		u32 __iomem *addr, u8 major_revision)
+{
+	u32 temp, port_offset, port_count;
+	int i;
+
+	if (major_revision > 0x03) {
+		xhci_warn(xhci, "Ignoring unknown port speed, "
+				"Ext Cap %p, revision = 0x%x\n",
+				addr, major_revision);
+		/* Ignoring port protocol we can't understand. FIXME */
+		return;
+	}
+
+	/* Port offset and count in the third dword, see section 7.2 */
+	temp = xhci_readl(xhci, addr + 2);
+	port_offset = XHCI_EXT_PORT_OFF(temp);
+	port_count = XHCI_EXT_PORT_COUNT(temp);
+	xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+			"count = %u, revision = 0x%x\n",
+			addr, port_offset, port_count, major_revision);
+	/* Port count includes the current port offset */
+	if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+		/* WTF? "Valid values are ‘1’ to MaxPorts" */
+		return;
+	port_offset--;
+	for (i = port_offset; i < (port_offset + port_count); i++) {
+		/* Duplicate entry.  Ignore the port if the revisions differ. */
+		if (xhci->port_array[i] != 0) {
+			xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+					" port %u\n", addr, i);
+			xhci_warn(xhci, "Port was marked as USB %u, "
+					"duplicated as USB %u\n",
+					xhci->port_array[i], major_revision);
+			/* Only adjust the roothub port counts if we haven't
+			 * found a similar duplicate.
+			 */
+			if (xhci->port_array[i] != major_revision &&
+				xhci->port_array[i] != (u8) -1) {
+				if (xhci->port_array[i] == 0x03)
+					xhci->num_usb3_ports--;
+				else
+					xhci->num_usb2_ports--;
+				xhci->port_array[i] = (u8) -1;
+			}
+			/* FIXME: Should we disable the port? */
+			continue;
+		}
+		xhci->port_array[i] = major_revision;
+		if (major_revision == 0x03)
+			xhci->num_usb3_ports++;
+		else
+			xhci->num_usb2_ports++;
+	}
+	/* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be.  We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+	u32 __iomem *addr;
+	u32 offset;
+	unsigned int num_ports;
+	int i, port_index;
+
+	addr = &xhci->cap_regs->hcc_params;
+	offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+	if (offset == 0) {
+		xhci_err(xhci, "No Extended Capability registers, "
+				"unable to set up roothub.\n");
+		return -ENODEV;
+	}
+
+	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+	xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+	if (!xhci->port_array)
+		return -ENOMEM;
+
+	/*
+	 * For whatever reason, the first capability offset is from the
+	 * capability register base, not from the HCCPARAMS register.
+	 * See section 5.3.6 for offset calculation.
+	 */
+	addr = &xhci->cap_regs->hc_capbase + offset;
+	while (1) {
+		u32 cap_id;
+
+		cap_id = xhci_readl(xhci, addr);
+		if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+			xhci_add_in_port(xhci, num_ports, addr,
+					(u8) XHCI_EXT_PORT_MAJOR(cap_id));
+		offset = XHCI_EXT_CAPS_NEXT(cap_id);
+		if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+				== num_ports)
+			break;
+		/*
+		 * Once you're into the Extended Capabilities, the offset is
+		 * always relative to the register holding the offset.
+		 */
+		addr += offset;
+	}
+
+	if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+		xhci_warn(xhci, "No ports on the roothubs?\n");
+		return -ENODEV;
+	}
+	xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+			xhci->num_usb2_ports, xhci->num_usb3_ports);
+	/*
+	 * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+	 * Not sure how the USB core will handle a hub with no ports...
+	 */
+	if (xhci->num_usb2_ports) {
+		xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+				xhci->num_usb2_ports, flags);
+		if (!xhci->usb2_ports)
+			return -ENOMEM;
+
+		port_index = 0;
+		for (i = 0; i < num_ports; i++) {
+			if (xhci->port_array[i] == 0x03 ||
+					xhci->port_array[i] == 0 ||
+					xhci->port_array[i] == -1)
+				continue;
+
+			xhci->usb2_ports[port_index] =
+				&xhci->op_regs->port_status_base +
+				NUM_PORT_REGS*i;
+			xhci_dbg(xhci, "USB 2.0 port at index %u, "
+					"addr = %p\n", i,
+					xhci->usb2_ports[port_index]);
+			port_index++;
+		}
+	}
+	if (xhci->num_usb3_ports) {
+		xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+				xhci->num_usb3_ports, flags);
+		if (!xhci->usb3_ports)
+			return -ENOMEM;
+
+		port_index = 0;
+		for (i = 0; i < num_ports; i++)
+			if (xhci->port_array[i] == 0x03) {
+				xhci->usb3_ports[port_index] =
+					&xhci->op_regs->port_status_base +
+					NUM_PORT_REGS*i;
+				xhci_dbg(xhci, "USB 3.0 port at index %u, "
+						"addr = %p\n", i,
+						xhci->usb3_ports[port_index]);
+				port_index++;
+			}
+	}
+	return 0;
+}
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 {
@@ -1809,6 +1976,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 
 	if (scratchpad_alloc(xhci, flags))
 		goto fail;
+	if (xhci_setup_port_arrays(xhci, flags))
+		goto fail;
 
 	return 0;
 
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 9f3115e729b..df558f6f84e 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2104,7 +2104,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 
 	if (!(status & STS_EINT)) {
 		spin_unlock(&xhci->lock);
-		xhci_warn(xhci, "Spurious interrupt.\n");
 		return IRQ_NONE;
 	}
 	xhci_dbg(xhci, "op reg status = %08x\n", status);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 5d7d4e951ea..45e4a3108cc 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -577,6 +577,65 @@ static void xhci_restore_registers(struct xhci_hcd *xhci)
 	xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
 }
 
+static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci)
+{
+	u64	val_64;
+
+	/* step 2: initialize command ring buffer */
+	val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+		(xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
+				      xhci->cmd_ring->dequeue) &
+		 (u64) ~CMD_RING_RSVD_BITS) |
+		xhci->cmd_ring->cycle_state;
+	xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
+			(long unsigned long) val_64);
+	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+}
+
+/*
+ * The whole command ring must be cleared to zero when we suspend the host.
+ *
+ * The host doesn't save the command ring pointer in the suspend well, so we
+ * need to re-program it on resume.  Unfortunately, the pointer must be 64-byte
+ * aligned, because of the reserved bits in the command ring dequeue pointer
+ * register.  Therefore, we can't just set the dequeue pointer back in the
+ * middle of the ring (TRBs are 16-byte aligned).
+ */
+static void xhci_clear_command_ring(struct xhci_hcd *xhci)
+{
+	struct xhci_ring *ring;
+	struct xhci_segment *seg;
+
+	ring = xhci->cmd_ring;
+	seg = ring->deq_seg;
+	do {
+		memset(seg->trbs, 0, SEGMENT_SIZE);
+		seg = seg->next;
+	} while (seg != ring->deq_seg);
+
+	/* Reset the software enqueue and dequeue pointers */
+	ring->deq_seg = ring->first_seg;
+	ring->dequeue = ring->first_seg->trbs;
+	ring->enq_seg = ring->deq_seg;
+	ring->enqueue = ring->dequeue;
+
+	/*
+	 * Ring is now zeroed, so the HW should look for change of ownership
+	 * when the cycle bit is set to 1.
+	 */
+	ring->cycle_state = 1;
+
+	/*
+	 * Reset the hardware dequeue pointer.
+	 * Yes, this will need to be re-written after resume, but we're paranoid
+	 * and want to make sure the hardware doesn't access bogus memory
+	 * because, say, the BIOS or an SMI started the host without changing
+	 * the command ring pointers.
+	 */
+	xhci_set_cmd_ring_deq(xhci);
+}
+
 /*
  * Stop HC (not bus-specific)
  *
@@ -604,6 +663,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;
 	}
+	xhci_clear_command_ring(xhci);
 
 	/* step 3: save registers */
 	xhci_save_registers(xhci);
@@ -635,7 +695,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	u64	val_64;
 	int	old_state, retval;
 
 	old_state = hcd->state;
@@ -648,15 +707,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		/* step 1: restore register */
 		xhci_restore_registers(xhci);
 		/* step 2: initialize command ring buffer */
-		val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
-		val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
-			 (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
-					       xhci->cmd_ring->dequeue) &
-			 (u64) ~CMD_RING_RSVD_BITS) |
-			 xhci->cmd_ring->cycle_state;
-		xhci_dbg(xhci, "// Setting command ring address to 0x%llx\n",
-				(long unsigned long) val_64);
-		xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
+		xhci_set_cmd_ring_deq(xhci);
 		/* step 3: restore state and start state*/
 		/* step 3: set CRS flag */
 		command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -714,6 +765,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		return retval;
 	}
 
+	spin_unlock_irq(&xhci->lock);
 	/* Re-setup MSI-X */
 	if (hcd->irq)
 		free_irq(hcd->irq, hcd);
@@ -736,6 +788,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		hcd->irq = pdev->irq;
 	}
 
+	spin_lock_irq(&xhci->lock);
 	/* step 4: set Run/Stop bit */
 	command = xhci_readl(xhci, &xhci->op_regs->command);
 	command |= CMD_RUN;
@@ -1496,6 +1549,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		cmd_completion = command->completion;
 		cmd_status = &command->status;
 		command->command_trb = xhci->cmd_ring->enqueue;
+
+		/* Enqueue pointer can be left pointing to the link TRB,
+		 * we must handle that
+		 */
+		if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+				== TRB_TYPE(TRB_LINK))
+			command->command_trb =
+				xhci->cmd_ring->enq_seg->next->trbs;
+
 		list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
 	} else {
 		in_ctx = virt_dev->in_ctx;
@@ -2219,6 +2281,15 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Attempt to submit the Reset Device command to the command ring */
 	spin_lock_irqsave(&xhci->lock, flags);
 	reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+	/* Enqueue pointer can be left pointing to the link TRB,
+	 * we must handle that
+	 */
+	if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+			== TRB_TYPE(TRB_LINK))
+		reset_device_cmd->command_trb =
+			xhci->cmd_ring->enq_seg->next->trbs;
+
 	list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
 	ret = xhci_queue_reset_device(xhci, slot_id);
 	if (ret) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 93d3bf4d213..170c367112d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -454,6 +454,24 @@ struct xhci_doorbell_array {
 
 
 /**
+ * struct xhci_protocol_caps
+ * @revision:		major revision, minor revision, capability ID,
+ *			and next capability pointer.
+ * @name_string:	Four ASCII characters to say which spec this xHC
+ *			follows, typically "USB ".
+ * @port_info:		Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+	u32	revision;
+	u32	name_string;
+	u32	port_info;
+};
+
+#define	XHCI_EXT_PORT_MAJOR(x)	(((x) >> 24) & 0xff)
+#define	XHCI_EXT_PORT_OFF(x)	((x) & 0xff)
+#define	XHCI_EXT_PORT_COUNT(x)	(((x) >> 8) & 0xff)
+
+/**
  * struct xhci_container_ctx
  * @type: Type of context.  Used to calculated offsets to contained contexts.
  * @size: Size of the context data
@@ -621,6 +639,11 @@ struct xhci_ep_ctx {
 #define MAX_PACKET_MASK		(0xffff << 16)
 #define MAX_PACKET_DECODED(p)	(((p) >> 16) & 0xffff)
 
+/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
+ * USB2.0 spec 9.6.6.
+ */
+#define GET_MAX_PACKET(p)	((p) & 0x7ff)
+
 /* tx_info bitmasks */
 #define AVG_TRB_LENGTH_FOR_EP(p)	((p) & 0xffff)
 #define MAX_ESIT_PAYLOAD_FOR_EP(p)	(((p) & 0xffff) << 16)
@@ -1235,6 +1258,14 @@ struct xhci_hcd {
 	u32			suspended_ports[8];	/* which ports are
 							   suspended */
 	unsigned long		resume_done[MAX_HC_PORTS];
+	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+	u8			*port_array;
+	/* Array of pointers to USB 3.0 PORTSC registers */
+	u32 __iomem		**usb3_ports;
+	unsigned int		num_usb3_ports;
+	/* Array of pointers to USB 2.0 PORTSC registers */
+	u32 __iomem		**usb2_ports;
+	unsigned int		num_usb2_ports;
 };
 
 /* For testing purposes */
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 5a47805d958..c90c89dc000 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -364,7 +364,7 @@ static int mts_scsi_host_reset(struct scsi_cmnd *srb)
 }
 
 static int
-mts_scsi_queuecommand(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback);
+mts_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *srb);
 
 static void mts_transfer_cleanup( struct urb *transfer );
 static void mts_do_sg(struct urb * transfer);
@@ -573,7 +573,7 @@ mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
 
 
 static int
-mts_scsi_queuecommand(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback)
+mts_scsi_queuecommand_lck(struct scsi_cmnd *srb, mts_scsi_cmnd_callback callback)
 {
 	struct mts_desc* desc = (struct mts_desc*)(srb->device->host->hostdata[0]);
 	int err = 0;
@@ -626,6 +626,8 @@ out:
 	return err;
 }
 
+static DEF_SCSI_QCMD(mts_scsi_queuecommand)
+
 static struct scsi_host_template mts_scsi_host_template = {
 	.module			= THIS_MODULE,
 	.name			= "microtekX6",
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 2f43c57743c..9251773ecef 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -196,11 +196,9 @@ static ssize_t get_port1_handler(struct device *dev,
 	return read_port(dev, attr, buf, 1, CYPRESS_READ_PORT_ID1);
 }
 
-static DEVICE_ATTR(port0, S_IWUGO | S_IRUGO,
-		   get_port0_handler, set_port0_handler);
+static DEVICE_ATTR(port0, S_IRUGO | S_IWUSR, get_port0_handler, set_port0_handler);
 
-static DEVICE_ATTR(port1, S_IWUGO | S_IRUGO,
-		   get_port1_handler, set_port1_handler);
+static DEVICE_ATTR(port1, S_IRUGO | S_IWUSR, get_port1_handler, set_port1_handler);
 
 
 static int cypress_probe(struct usb_interface *interface,
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 37566419877..c9078e4e1f4 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -553,6 +553,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
 			/* needed for power consumption */
 			struct usb_config_descriptor *cfg_descriptor = &dev->udev->actconfig->desc;
 
+			memset(&info, 0, sizeof(info));
 			/* directly from the descriptor */
 			info.vendor = le16_to_cpu(dev->udev->descriptor.idVendor);
 			info.product = dev->product_id;
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 70d00e99a4b..dd573abd2d1 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3008,6 +3008,7 @@ sisusb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 #else
 			x.sisusb_conactive  = 0;
 #endif
+			memset(x.sisusb_reserved, 0, sizeof(x.sisusb_reserved));
 
 			if (copy_to_user((void __user *)arg, &x, sizeof(x)))
 				retval = -EFAULT;
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index d77aba46ae8..f63776a48e2 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -86,7 +86,7 @@ static ssize_t set_speed(struct device *dev, struct device_attribute *attr,
 	return count;
 }
 
-static DEVICE_ATTR(speed, S_IWUGO | S_IRUGO, show_speed, set_speed);
+static DEVICE_ATTR(speed, S_IRUGO | S_IWUSR, show_speed, set_speed);
 
 static int tv_probe(struct usb_interface *interface,
 		    const struct usb_device_id *id)
diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c
index 63da2c3c838..1732d9bc097 100644
--- a/drivers/usb/misc/usbled.c
+++ b/drivers/usb/misc/usbled.c
@@ -1,5 +1,5 @@
 /*
- * USB LED driver - 1.1
+ * USB LED driver
  *
  * Copyright (C) 2004 Greg Kroah-Hartman (greg@kroah.com)
  *
@@ -20,12 +20,17 @@
 #define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com"
 #define DRIVER_DESC "USB LED Driver"
 
-#define VENDOR_ID	0x0fc5
-#define PRODUCT_ID	0x1223
+enum led_type {
+	DELCOM_VISUAL_SIGNAL_INDICATOR,
+	DREAM_CHEEKY_WEBMAIL_NOTIFIER,
+};
 
 /* table of devices that work with this driver */
 static const struct usb_device_id id_table[] = {
-	{ USB_DEVICE(VENDOR_ID, PRODUCT_ID) },
+	{ USB_DEVICE(0x0fc5, 0x1223),
+			.driver_info = DELCOM_VISUAL_SIGNAL_INDICATOR },
+	{ USB_DEVICE(0x1d34, 0x0004),
+			.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
 	{ },
 };
 MODULE_DEVICE_TABLE (usb, id_table);
@@ -35,15 +40,12 @@ struct usb_led {
 	unsigned char		blue;
 	unsigned char		red;
 	unsigned char		green;
+	enum led_type		type;
 };
 
-#define BLUE	0x04
-#define RED	0x02
-#define GREEN	0x01
 static void change_color(struct usb_led *led)
 {
 	int retval;
-	unsigned char color = 0x07;
 	unsigned char *buffer;
 
 	buffer = kmalloc(8, GFP_KERNEL);
@@ -52,25 +54,59 @@ static void change_color(struct usb_led *led)
 		return;
 	}
 
-	if (led->blue)
-		color &= ~(BLUE);
-	if (led->red)
-		color &= ~(RED);
-	if (led->green)
-		color &= ~(GREEN);
-	dev_dbg(&led->udev->dev,
-		"blue = %d, red = %d, green = %d, color = %.2x\n",
-		led->blue, led->red, led->green, color);
-
-	retval = usb_control_msg(led->udev,
-				usb_sndctrlpipe(led->udev, 0),
-				0x12,
-				0xc8,
-				(0x02 * 0x100) + 0x0a,
-				(0x00 * 0x100) + color,
-				buffer,	
-				8,
-				2000);
+	switch (led->type) {
+	case DELCOM_VISUAL_SIGNAL_INDICATOR: {
+		unsigned char color = 0x07;
+
+		if (led->blue)
+			color &= ~0x04;
+		if (led->red)
+			color &= ~0x02;
+		if (led->green)
+			color &= ~0x01;
+		dev_dbg(&led->udev->dev,
+			"blue = %d, red = %d, green = %d, color = %.2x\n",
+			led->blue, led->red, led->green, color);
+
+		retval = usb_control_msg(led->udev,
+					usb_sndctrlpipe(led->udev, 0),
+					0x12,
+					0xc8,
+					(0x02 * 0x100) + 0x0a,
+					(0x00 * 0x100) + color,
+					buffer,
+					8,
+					2000);
+		break;
+	}
+
+	case DREAM_CHEEKY_WEBMAIL_NOTIFIER:
+		dev_dbg(&led->udev->dev,
+			"red = %d, green = %d, blue = %d\n",
+			led->red, led->green, led->blue);
+
+		buffer[0] = led->red;
+		buffer[1] = led->green;
+		buffer[2] = led->blue;
+		buffer[3] = buffer[4] = buffer[5] = 0;
+		buffer[6] = 0x1a;
+		buffer[7] = 0x05;
+
+		retval = usb_control_msg(led->udev,
+					usb_sndctrlpipe(led->udev, 0),
+					0x09,
+					0x21,
+					0x200,
+					0,
+					buffer,
+					8,
+					2000);
+		break;
+
+	default:
+		dev_err(&led->udev->dev, "unknown device type %d\n", led->type);
+	}
+
 	if (retval)
 		dev_dbg(&led->udev->dev, "retval = %d\n", retval);
 	kfree(buffer);
@@ -94,7 +130,7 @@ static ssize_t set_##value(struct device *dev, struct device_attribute *attr, co
 	change_color(led);						\
 	return count;							\
 }									\
-static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value);
 show_set(blue);
 show_set(red);
 show_set(green);
@@ -107,11 +143,12 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id
 
 	dev = kzalloc(sizeof(struct usb_led), GFP_KERNEL);
 	if (dev == NULL) {
-		dev_err(&interface->dev, "Out of memory\n");
+		dev_err(&interface->dev, "out of memory\n");
 		goto error_mem;
 	}
 
 	dev->udev = usb_get_dev(udev);
+	dev->type = id->driver_info;
 
 	usb_set_intfdata (interface, dev);
 
@@ -125,6 +162,31 @@ static int led_probe(struct usb_interface *interface, const struct usb_device_id
 	if (retval)
 		goto error;
 
+	if (dev->type == DREAM_CHEEKY_WEBMAIL_NOTIFIER) {
+		unsigned char *enable;
+
+		enable = kmemdup("\x1f\x02\0\x5f\0\0\x1a\x03", 8, GFP_KERNEL);
+		if (!enable) {
+			dev_err(&interface->dev, "out of memory\n");
+			retval = -ENOMEM;
+			goto error;
+		}
+
+		retval = usb_control_msg(udev,
+					usb_sndctrlpipe(udev, 0),
+					0x09,
+					0x21,
+					0x200,
+					0,
+					enable,
+					8,
+					2000);
+
+		kfree(enable);
+		if (retval != 8)
+			goto error;
+	}
+
 	dev_info(&interface->dev, "USB LED device now attached\n");
 	return 0;
 
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index de8ef945b53..417b8f207e8 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -192,7 +192,7 @@ static ssize_t set_attr_##name(struct device *dev, 		\
 								\
 	return count;						\
 }								\
-static DEVICE_ATTR(name, S_IWUGO | S_IRUGO, show_attr_##name, set_attr_##name);
+static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_attr_##name, set_attr_##name);
 
 static ssize_t show_attr_text(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -223,7 +223,7 @@ static ssize_t set_attr_text(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(text, S_IWUGO | S_IRUGO, show_attr_text, set_attr_text);
+static DEVICE_ATTR(text, S_IRUGO | S_IWUSR, show_attr_text, set_attr_text);
 
 static ssize_t show_attr_decimals(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -272,8 +272,7 @@ static ssize_t set_attr_decimals(struct device *dev,
 	return count;
 }
 
-static DEVICE_ATTR(decimals, S_IWUGO | S_IRUGO,
-	show_attr_decimals, set_attr_decimals);
+static DEVICE_ATTR(decimals, S_IRUGO | S_IWUSR, show_attr_decimals, set_attr_decimals);
 
 static ssize_t show_attr_textmode(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -319,8 +318,7 @@ static ssize_t set_attr_textmode(struct device *dev,
 	return -EINVAL;
 }
 
-static DEVICE_ATTR(textmode, S_IWUGO | S_IRUGO,
-	show_attr_textmode, set_attr_textmode);
+static DEVICE_ATTR(textmode, S_IRUGO | S_IWUSR, show_attr_textmode, set_attr_textmode);
 
 
 MYDEV_ATTR_SIMPLE_UNSIGNED(powered, update_display_powered);
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 796e2f68f74..4ff21587ab0 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -3,7 +3,7 @@
 /*
  *	uss720.c  --  USS720 USB Parport Cable.
  *
- *	Copyright (C) 1999, 2005
+ *	Copyright (C) 1999, 2005, 2010
  *	    Thomas Sailer (t.sailer@alumni.ethz.ch)
  *
  *	This program is free software; you can redistribute it and/or modify
@@ -776,6 +776,8 @@ static const struct usb_device_id uss720_table[] = {
 	{ USB_DEVICE(0x0557, 0x2001) },
 	{ USB_DEVICE(0x0729, 0x1284) },
 	{ USB_DEVICE(0x1293, 0x0002) },
+	{ USB_DEVICE(0x1293, 0x0002) },
+	{ USB_DEVICE(0x050d, 0x0002) },
 	{ }						/* Terminating entry */
 };
 
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 719c6180b31..ac5bfd619e6 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -536,6 +536,7 @@ static const struct file_operations yurex_fops = {
 	.open =		yurex_open,
 	.release =	yurex_release,
 	.fasync	=	yurex_fasync,
+	.llseek =	default_llseek,
 };
 
 
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index 44cb37b5a4d..a09dbd243eb 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -15,7 +15,6 @@
 #include <linux/poll.h>
 #include <linux/compat.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 
@@ -437,6 +436,28 @@ static unsigned int mon_bin_get_data(const struct mon_reader_bin *rp,
 	return length;
 }
 
+/*
+ * This is the look-ahead pass in case of 'C Zi', when actual_length cannot
+ * be used to determine the length of the whole contiguous buffer.
+ */
+static unsigned int mon_bin_collate_isodesc(const struct mon_reader_bin *rp,
+    struct urb *urb, unsigned int ndesc)
+{
+	struct usb_iso_packet_descriptor *fp;
+	unsigned int length;
+
+	length = 0;
+	fp = urb->iso_frame_desc;
+	while (ndesc-- != 0) {
+		if (fp->actual_length != 0) {
+			if (fp->offset + fp->actual_length > length)
+				length = fp->offset + fp->actual_length;
+		}
+		fp++;
+	}
+	return length;
+}
+
 static void mon_bin_get_isodesc(const struct mon_reader_bin *rp,
     unsigned int offset, struct urb *urb, char ev_type, unsigned int ndesc)
 {
@@ -479,6 +500,10 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
 	/*
 	 * Find the maximum allowable length, then allocate space.
 	 */
+	urb_length = (ev_type == 'S') ?
+	    urb->transfer_buffer_length : urb->actual_length;
+	length = urb_length;
+
 	if (usb_endpoint_xfer_isoc(epd)) {
 		if (urb->number_of_packets < 0) {
 			ndesc = 0;
@@ -487,14 +512,16 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
 		} else {
 			ndesc = urb->number_of_packets;
 		}
+		if (ev_type == 'C' && usb_urb_dir_in(urb))
+			length = mon_bin_collate_isodesc(rp, urb, ndesc);
 	} else {
 		ndesc = 0;
 	}
 	lendesc = ndesc*sizeof(struct mon_bin_isodesc);
 
-	urb_length = (ev_type == 'S') ?
-	    urb->transfer_buffer_length : urb->actual_length;
-	length = urb_length;
+	/* not an issue unless there's a subtle bug in a HCD somewhere */
+	if (length >= urb->transfer_buffer_length)
+		length = urb->transfer_buffer_length;
 
 	if (length >= rp->b_size/5)
 		length = rp->b_size/5;
diff --git a/drivers/usb/mon/mon_stat.c b/drivers/usb/mon/mon_stat.c
index 8ec94f15a73..e5ce42bd316 100644
--- a/drivers/usb/mon/mon_stat.c
+++ b/drivers/usb/mon/mon_stat.c
@@ -11,7 +11,6 @@
 #include <linux/slab.h>
 #include <linux/usb.h>
 #include <linux/fs.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 
 #include "usb_mon.h"
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 341a37a469b..4cbb7e4b368 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -12,6 +12,7 @@ config USB_MUSB_HDRC
 	depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523))
 	select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
 	select TWL4030_USB if MACH_OMAP_3430SDP
+	select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
 	select USB_OTG_UTILS
 	tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
 	help
@@ -30,57 +31,41 @@ config USB_MUSB_HDRC
 	  If you do not know what this is, please say N.
 
 	  To compile this driver as a module, choose M here; the
-	  module will be called "musb_hdrc".
+	  module will be called "musb-hdrc".
 
-config USB_MUSB_SOC
-	boolean
+choice
+	prompt "Platform Glue Layer"
 	depends on USB_MUSB_HDRC
-	default y if ARCH_DAVINCI
-	default y if ARCH_OMAP2430
-	default y if ARCH_OMAP3
-	default y if ARCH_OMAP4
-	default y if (BF54x && !BF544)
-	default y if (BF52x && !BF522 && !BF523)
 
-comment "DaVinci 35x and 644x USB support"
-	depends on USB_MUSB_HDRC && ARCH_DAVINCI_DMx
+config USB_MUSB_DAVINCI
+	bool "DaVinci"
+	depends on ARCH_DAVINCI_DMx
 
-comment "DA8xx/OMAP-L1x USB support"
-	depends on USB_MUSB_HDRC && ARCH_DAVINCI_DA8XX
+config USB_MUSB_DA8XX
+	bool "DA8xx/OMAP-L1x"
+	depends on ARCH_DAVINCI_DA8XX
 
-comment "OMAP 243x high speed USB support"
-	depends on USB_MUSB_HDRC && ARCH_OMAP2430
+config USB_MUSB_TUSB6010
+	bool "TUSB6010"
+	depends on ARCH_OMAP
 
-comment "OMAP 343x high speed USB support"
-	depends on USB_MUSB_HDRC && ARCH_OMAP3
+config USB_MUSB_OMAP2PLUS
+	bool "OMAP2430 and onwards"
+	depends on ARCH_OMAP2PLUS
 
-comment "OMAP 44xx high speed USB support"
-	depends on USB_MUSB_HDRC && ARCH_OMAP4
+config USB_MUSB_AM35X
+	bool "AM35x"
+	depends on ARCH_OMAP
 
-comment "Blackfin high speed USB Support"
-	depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523))
+config USB_MUSB_BLACKFIN
+	bool "Blackfin"
+	depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
 
-config USB_MUSB_AM35X
-	bool
-	depends on USB_MUSB_HDRC && !ARCH_OMAP2430 && !ARCH_OMAP4
-	select NOP_USB_XCEIV
-	default MACH_OMAP3517EVM
-	help
-	  Select this option if your platform is based on AM35x. As
-	  AM35x has an updated MUSB with CPPI4.1 DMA so this config
-	  is introduced to differentiate musb ip between OMAP3x and
-	  AM35x platforms.
-
-config USB_TUSB6010
-	boolean "TUSB 6010 support"
-	depends on USB_MUSB_HDRC && !USB_MUSB_SOC
-	select NOP_USB_XCEIV
-	default y
-	help
-	  The TUSB 6010 chip, from Texas Instruments, connects a discrete
-	  HDRC core using a 16-bit parallel bus (NOR flash style) or VLYNQ
-	  (a high speed serial link).  It can use system-specific external
-	  DMA controllers.
+config USB_MUSB_UX500
+	bool "U8500 and U5500"
+	depends on (ARCH_U8500 && AB8500_USB) || (ARCH_U5500)
+
+endchoice
 
 choice
 	prompt "Driver Mode"
@@ -158,7 +143,7 @@ config USB_MUSB_HDRC_HCD
 config MUSB_PIO_ONLY
 	bool 'Disable DMA (always use PIO)'
 	depends on USB_MUSB_HDRC
-	default USB_TUSB6010 || ARCH_DAVINCI_DA8XX || USB_MUSB_AM35X
+	default USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X
 	help
 	  All data is copied between memory and FIFO by the CPU.
 	  DMA controllers are ignored.
@@ -171,21 +156,21 @@ config MUSB_PIO_ONLY
 config USB_INVENTRA_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	default ARCH_OMAP2430 || ARCH_OMAP3 || BLACKFIN || ARCH_OMAP4
+	default USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
 	help
 	  Enable DMA transfers using Mentor's engine.
 
 config USB_TI_CPPI_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	default ARCH_DAVINCI
+	default USB_MUSB_DAVINCI
 	help
 	  Enable DMA transfers when TI CPPI DMA is available.
 
 config USB_TUSB_OMAP_DMA
 	bool
 	depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY
-	depends on USB_TUSB6010
+	depends on USB_MUSB_TUSB6010
 	depends on ARCH_OMAP
 	default y
 	help
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index ce164e8998d..74df5284894 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -8,22 +8,19 @@ obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
 
 musb_hdrc-y := musb_core.o
 
-musb_hdrc-$(CONFIG_ARCH_DAVINCI_DMx)		+= davinci.o
-musb_hdrc-$(CONFIG_ARCH_DAVINCI_DA8XX)		+= da8xx.o
-musb_hdrc-$(CONFIG_USB_TUSB6010)		+= tusb6010.o
-musb_hdrc-$(CONFIG_ARCH_OMAP2430)		+= omap2430.o
-ifeq ($(CONFIG_USB_MUSB_AM35X),y)
-	musb_hdrc-$(CONFIG_ARCH_OMAP3430)	+= am35x.o
-else
-	musb_hdrc-$(CONFIG_ARCH_OMAP3430)	+= omap2430.o
-endif
-musb_hdrc-$(CONFIG_ARCH_OMAP4)			+= omap2430.o
-musb_hdrc-$(CONFIG_BF54x)			+= blackfin.o
-musb_hdrc-$(CONFIG_BF52x)			+= blackfin.o
 musb_hdrc-$(CONFIG_USB_GADGET_MUSB_HDRC)	+= musb_gadget_ep0.o musb_gadget.o
 musb_hdrc-$(CONFIG_USB_MUSB_HDRC_HCD)		+= musb_virthub.o musb_host.o
 musb_hdrc-$(CONFIG_DEBUG_FS)			+= musb_debugfs.o
 
+# Hardware Glue Layer
+obj-$(CONFIG_USB_MUSB_OMAP2PLUS)		+= omap2430.o
+obj-$(CONFIG_USB_MUSB_AM35X)			+= am35x.o
+obj-$(CONFIG_USB_MUSB_TUSB6010)			+= tusb6010.o
+obj-$(CONFIG_USB_MUSB_DAVINCI)			+= davinci.o
+obj-$(CONFIG_USB_MUSB_DA8XX)			+= da8xx.o
+obj-$(CONFIG_USB_MUSB_BLACKFIN)			+= blackfin.o
+obj-$(CONFIG_USB_MUSB_UX500)			+= ux500.o
+
 # the kconfig must guarantee that only one of the
 # possible I/O schemes will be enabled at a time ...
 # PIO only, or DMA (several potential schemes).
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index b0aabf3a606..d5a3da37c90 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -29,8 +29,9 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
-#include <plat/control.h>
 #include <plat/usb.h>
 
 #include "musb_core.h"
@@ -80,51 +81,18 @@
 
 #define USB_MENTOR_CORE_OFFSET	0x400
 
-static inline void phy_on(void)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(100);
-	u32 devconf2;
-
-	/*
-	 * Start the on-chip PHY and its PLL.
-	 */
-	devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
-	devconf2 |= CONF2_PHY_PLLON;
-
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-
-	DBG(1, "Waiting for PHY clock good...\n");
-	while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
-			& CONF2_PHYCLKGD)) {
-		cpu_relax();
-
-		if (time_after(jiffies, timeout)) {
-			DBG(1, "musb PHY clock good timed out\n");
-			break;
-		}
-	}
-}
-
-static inline void phy_off(void)
-{
-	u32 devconf2;
-
-	/*
-	 * Power down the on-chip PHY.
-	 */
-	devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
-
-	devconf2 &= ~CONF2_PHY_PLLON;
-	devconf2 |=  CONF2_PHYPWRDN | CONF2_OTGPWRDN;
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-}
+struct am35x_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*phy_clk;
+	struct clk		*clk;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
 /*
- * musb_platform_enable - enable interrupts
+ * am35x_musb_enable - enable interrupts
  */
-void musb_platform_enable(struct musb *musb)
+static void am35x_musb_enable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 epmask;
@@ -143,9 +111,9 @@ void musb_platform_enable(struct musb *musb)
 }
 
 /*
- * musb_platform_disable - disable HDRC and flush interrupts
+ * am35x_musb_disable - disable HDRC and flush interrupts
  */
-void musb_platform_disable(struct musb *musb)
+static void am35x_musb_disable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 
@@ -162,7 +130,7 @@ void musb_platform_disable(struct musb *musb)
 #define portstate(stmt)
 #endif
 
-static void am35x_set_vbus(struct musb *musb, int is_on)
+static void am35x_musb_set_vbus(struct musb *musb, int is_on)
 {
 	WARN_ON(is_on && is_peripheral_active(musb));
 }
@@ -221,7 +189,7 @@ static void otg_timer(unsigned long _musb)
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void am35x_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	static unsigned long last_timer;
 
@@ -251,13 +219,16 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 	mod_timer(&otg_workaround, timeout);
 }
 
-static irqreturn_t am35x_interrupt(int irq, void *hci)
+static irqreturn_t am35x_musb_interrupt(int irq, void *hci)
 {
 	struct musb  *musb = hci;
 	void __iomem *reg_base = musb->ctrl_base;
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
 	unsigned long flags;
 	irqreturn_t ret = IRQ_NONE;
-	u32 epintr, usbintr, lvl_intr;
+	u32 epintr, usbintr;
 
 	spin_lock_irqsave(&musb->lock, flags);
 
@@ -346,9 +317,8 @@ eoi:
 	/* EOI needs to be written for the IRQ to be re-asserted. */
 	if (ret == IRQ_HANDLED || epintr || usbintr) {
 		/* clear level interrupt */
-		lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-		lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
-		omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+		if (data->clear_irq)
+			data->clear_irq();
 		/* write EOI */
 		musb_writel(reg_base, USB_END_OF_INTR_REG, 0);
 	}
@@ -362,137 +332,85 @@ eoi:
 	return ret;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int am35x_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
-	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+	int     retval = 0;
 
-	devconf2 &= ~CONF2_OTGMODE;
-	switch (musb_mode) {
-#ifdef	CONFIG_USB_MUSB_HDRC_HCD
-	case MUSB_HOST:		/* Force VBUS valid, ID = 0 */
-		devconf2 |= CONF2_FORCE_HOST;
-		break;
-#endif
-#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
-	case MUSB_PERIPHERAL:	/* Force VBUS valid, ID = 1 */
-		devconf2 |= CONF2_FORCE_DEVICE;
-		break;
-#endif
-#ifdef	CONFIG_USB_MUSB_OTG
-	case MUSB_OTG:		/* Don't override the VBUS/ID comparators */
-		devconf2 |= CONF2_NO_OVERRIDE;
-		break;
-#endif
-	default:
-		DBG(2, "Trying to set unsupported mode %u\n", musb_mode);
-	}
+	if (data->set_mode)
+		data->set_mode(musb_mode);
+	else
+		retval = -EIO;
 
-	omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
-	return 0;
+	return retval;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int am35x_musb_init(struct musb *musb)
 {
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
 	void __iomem *reg_base = musb->ctrl_base;
-	u32 rev, lvl_intr, sw_reset;
-	int status;
+	u32 rev;
 
 	musb->mregs += USB_MENTOR_CORE_OFFSET;
 
-	clk_enable(musb->clock);
-	DBG(2, "musb->clock=%lud\n", clk_get_rate(musb->clock));
-
-	musb->phy_clock = clk_get(musb->controller, "fck");
-	if (IS_ERR(musb->phy_clock)) {
-		status = PTR_ERR(musb->phy_clock);
-		goto exit0;
-	}
-	clk_enable(musb->phy_clock);
-	DBG(2, "musb->phy_clock=%lud\n", clk_get_rate(musb->phy_clock));
-
 	/* Returns zero if e.g. not clocked */
 	rev = musb_readl(reg_base, USB_REVISION_REG);
-	if (!rev) {
-		status = -ENODEV;
-		goto exit1;
-	}
+	if (!rev)
+		return -ENODEV;
 
 	usb_nop_xceiv_register();
 	musb->xceiv = otg_get_transceiver();
-	if (!musb->xceiv) {
-		status = -ENODEV;
-		goto exit1;
-	}
+	if (!musb->xceiv)
+		return -ENODEV;
 
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
 
-	musb->board_set_vbus = am35x_set_vbus;
-
-	/* Global reset */
-	sw_reset = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
-
-	sw_reset |= AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(sw_reset, AM35XX_CONTROL_IP_SW_RESET);
-
-	sw_reset &= ~AM35XX_USBOTGSS_SW_RST;
-	omap_ctrl_writel(sw_reset, AM35XX_CONTROL_IP_SW_RESET);
+	/* Reset the musb */
+	if (data->reset)
+		data->reset();
 
 	/* Reset the controller */
 	musb_writel(reg_base, USB_CTRL_REG, AM35X_SOFT_RESET_MASK);
 
 	/* Start the on-chip PHY and its PLL. */
-	phy_on();
+	if (data->set_phy_power)
+		data->set_phy_power(1);
 
 	msleep(5);
 
-	musb->isr = am35x_interrupt;
+	musb->isr = am35x_musb_interrupt;
 
 	/* clear level interrupt */
-	lvl_intr = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
-	lvl_intr |= AM35XX_USBOTGSS_INT_CLR;
-	omap_ctrl_writel(lvl_intr, AM35XX_CONTROL_LVL_INTR_CLEAR);
+	if (data->clear_irq)
+		data->clear_irq();
+
 	return 0;
-exit1:
-	clk_disable(musb->phy_clock);
-	clk_put(musb->phy_clock);
-exit0:
-	clk_disable(musb->clock);
-	return status;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int am35x_musb_exit(struct musb *musb)
 {
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
 
-	phy_off();
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
 
 	otg_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
-	clk_disable(musb->clock);
-
-	clk_disable(musb->phy_clock);
-	clk_put(musb->phy_clock);
-
 	return 0;
 }
 
-#ifdef CONFIG_PM
-void musb_platform_save_context(struct musb *musb,
-	struct musb_context_registers *musb_context)
-{
-	phy_off();
-}
-
-void musb_platform_restore_context(struct musb *musb,
-	struct musb_context_registers *musb_context)
-{
-	phy_on();
-}
-#endif
-
 /* AM35x supports only 32bit read operation */
 void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 {
@@ -522,3 +440,215 @@ void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 		memcpy(dst, &val, len);
 	}
 }
+
+static const struct musb_platform_ops am35x_ops = {
+	.init		= am35x_musb_init,
+	.exit		= am35x_musb_exit,
+
+	.enable		= am35x_musb_enable,
+	.disable	= am35x_musb_disable,
+
+	.set_mode	= am35x_musb_set_mode,
+	.try_idle	= am35x_musb_try_idle,
+
+	.set_vbus	= am35x_musb_set_vbus,
+};
+
+static u64 am35x_dmamask = DMA_BIT_MASK(32);
+
+static int __init am35x_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct am35x_glue		*glue;
+
+	struct clk			*phy_clk;
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	phy_clk = clk_get(&pdev->dev, "fck");
+	if (IS_ERR(phy_clk)) {
+		dev_err(&pdev->dev, "failed to get PHY clock\n");
+		ret = PTR_ERR(phy_clk);
+		goto err2;
+	}
+
+	clk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err3;
+	}
+
+	ret = clk_enable(phy_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable PHY clock\n");
+		goto err4;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err5;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &am35x_dmamask;
+	musb->dev.coherent_dma_mask	= am35x_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->phy_clk			= phy_clk;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &am35x_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err6;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err6;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err6;
+	}
+
+	return 0;
+
+err6:
+	clk_disable(clk);
+
+err5:
+	clk_disable(phy_clk);
+
+err4:
+	clk_put(clk);
+
+err3:
+	clk_put(phy_clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit am35x_remove(struct platform_device *pdev)
+{
+	struct am35x_glue	*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_disable(glue->phy_clk);
+	clk_put(glue->clk);
+	clk_put(glue->phy_clk);
+	kfree(glue);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int am35x_suspend(struct device *dev)
+{
+	struct am35x_glue	*glue = dev_get_drvdata(dev);
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+
+	/* Shutdown the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(0);
+
+	clk_disable(glue->phy_clk);
+	clk_disable(glue->clk);
+
+	return 0;
+}
+
+static int am35x_resume(struct device *dev)
+{
+	struct am35x_glue	*glue = dev_get_drvdata(dev);
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
+	int			ret;
+
+	/* Start the on-chip PHY and its PLL. */
+	if (data->set_phy_power)
+		data->set_phy_power(1);
+
+	ret = clk_enable(glue->phy_clk);
+	if (ret) {
+		dev_err(dev, "failed to enable PHY clock\n");
+		return ret;
+	}
+
+	ret = clk_enable(glue->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct dev_pm_ops am35x_pm_ops = {
+	.suspend	= am35x_suspend,
+	.resume		= am35x_resume,
+};
+
+#define DEV_PM_OPS	&am35x_pm_ops
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver am35x_driver = {
+	.remove		= __exit_p(am35x_remove),
+	.driver		= {
+		.name	= "musb-am35x",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("AM35x MUSB Glue Layer");
+MODULE_AUTHOR("Ajay Kumar Gupta <ajay.gupta@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init am35x_init(void)
+{
+	return platform_driver_probe(&am35x_driver, am35x_probe);
+}
+subsys_initcall(am35x_init);
+
+static void __exit am35x_exit(void)
+{
+	platform_driver_unregister(&am35x_driver);
+}
+module_exit(am35x_exit);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index 611a9d27436..eeba228eb2a 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -15,12 +15,20 @@
 #include <linux/list.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/cacheflush.h>
 
 #include "musb_core.h"
 #include "blackfin.h"
 
+struct bfin_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
+
 /*
  * Load an endpoint's FIFO
  */
@@ -171,8 +179,9 @@ static irqreturn_t blackfin_interrupt(int irq, void *__hci)
 	}
 
 	/* Start sampling ID pin, when plug is removed from MUSB */
-	if (is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE
-		|| musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) {
+	if ((is_otg_enabled(musb) && (musb->xceiv->state == OTG_STATE_B_IDLE
+		|| musb->xceiv->state == OTG_STATE_A_WAIT_BCON)) ||
+		(musb->int_usb & MUSB_INTR_DISCONNECT && is_host_active(musb))) {
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 		musb->a_wait_bcon = TIMER_DELAY;
 	}
@@ -277,7 +286,7 @@ static void musb_conn_timer_handler(unsigned long _musb)
 	DBG(4, "state is %s\n", otg_state_string(musb));
 }
 
-void musb_platform_enable(struct musb *musb)
+static void bfin_musb_enable(struct musb *musb)
 {
 	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
@@ -285,11 +294,11 @@ void musb_platform_enable(struct musb *musb)
 	}
 }
 
-void musb_platform_disable(struct musb *musb)
+static void bfin_musb_disable(struct musb *musb)
 {
 }
 
-static void bfin_set_vbus(struct musb *musb, int is_on)
+static void bfin_musb_set_vbus(struct musb *musb, int is_on)
 {
 	int value = musb->config->gpio_vrsel_active;
 	if (!is_on)
@@ -302,51 +311,29 @@ static void bfin_set_vbus(struct musb *musb, int is_on)
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
-static int bfin_set_power(struct otg_transceiver *x, unsigned mA)
+static int bfin_musb_set_power(struct otg_transceiver *x, unsigned mA)
 {
 	return 0;
 }
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void bfin_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	if (!is_otg_enabled(musb) && is_host_enabled(musb))
 		mod_timer(&musb_conn_timer, jiffies + TIMER_DELAY);
 }
 
-int musb_platform_get_vbus_status(struct musb *musb)
+static int bfin_musb_get_vbus_status(struct musb *musb)
 {
 	return 0;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static void bfin_musb_reg_init(struct musb *musb)
 {
-
-	/*
-	 * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
-	 * and OTG HOST modes, while rev 1.1 and greater require PE7 to
-	 * be low for DEVICE mode and high for HOST mode. We set it high
-	 * here because we are in host mode
-	 */
-
-	if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
-		printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d \n",
-			musb->config->gpio_vrsel);
-		return -ENODEV;
-	}
-	gpio_direction_output(musb->config->gpio_vrsel, 0);
-
-	usb_nop_xceiv_register();
-	musb->xceiv = otg_get_transceiver();
-	if (!musb->xceiv) {
-		gpio_free(musb->config->gpio_vrsel);
-		return -ENODEV;
-	}
-
 	if (ANOMALY_05000346) {
 		bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
 		SSYNC();
@@ -358,7 +345,8 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	}
 
 	/* Configure PLL oscillator register */
-	bfin_write_USB_PLLOSC_CTRL(0x30a8);
+	bfin_write_USB_PLLOSC_CTRL(0x3080 |
+			((480/musb->config->clkin) << 1));
 	SSYNC();
 
 	bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
@@ -380,21 +368,47 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 				EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
 				EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
 	SSYNC();
+}
+
+static int bfin_musb_init(struct musb *musb)
+{
+
+	/*
+	 * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both DEVICE
+	 * and OTG HOST modes, while rev 1.1 and greater require PE7 to
+	 * be low for DEVICE mode and high for HOST mode. We set it high
+	 * here because we are in host mode
+	 */
+
+	if (gpio_request(musb->config->gpio_vrsel, "USB_VRSEL")) {
+		printk(KERN_ERR "Failed ro request USB_VRSEL GPIO_%d\n",
+			musb->config->gpio_vrsel);
+		return -ENODEV;
+	}
+	gpio_direction_output(musb->config->gpio_vrsel, 0);
+
+	usb_nop_xceiv_register();
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv) {
+		gpio_free(musb->config->gpio_vrsel);
+		return -ENODEV;
+	}
+
+	bfin_musb_reg_init(musb);
 
 	if (is_host_enabled(musb)) {
-		musb->board_set_vbus = bfin_set_vbus;
 		setup_timer(&musb_conn_timer,
 			musb_conn_timer_handler, (unsigned long) musb);
 	}
 	if (is_peripheral_enabled(musb))
-		musb->xceiv->set_power = bfin_set_power;
+		musb->xceiv->set_power = bfin_musb_set_power;
 
 	musb->isr = blackfin_interrupt;
 
 	return 0;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int bfin_musb_exit(struct musb *musb)
 {
 	gpio_free(musb->config->gpio_vrsel);
 
@@ -402,3 +416,154 @@ int musb_platform_exit(struct musb *musb)
 	usb_nop_xceiv_unregister();
 	return 0;
 }
+
+static const struct musb_platform_ops bfin_ops = {
+	.init		= bfin_musb_init,
+	.exit		= bfin_musb_exit,
+
+	.enable		= bfin_musb_enable,
+	.disable	= bfin_musb_disable,
+
+	.set_mode	= bfin_musb_set_mode,
+	.try_idle	= bfin_musb_try_idle,
+
+	.vbus_status	= bfin_musb_vbus_status,
+	.set_vbus	= bfin_musb_set_vbus,
+};
+
+static u64 bfin_dmamask = DMA_BIT_MASK(32);
+
+static int __init bfin_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct bfin_glue		*glue;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &bfin_dmamask;
+	musb->dev.coherent_dma_mask	= bfin_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+
+	pdata->platform_ops		= &bfin_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err2;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err2;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err2;
+	}
+
+	return 0;
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit bfin_remove(struct platform_device *pdev)
+{
+	struct bfin_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	kfree(glue);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_suspend(struct device *dev)
+{
+	struct bfin_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+
+	if (is_host_active(musb))
+		/*
+		 * During hibernate gpio_vrsel will change from high to low
+		 * low which will generate wakeup event resume the system
+		 * immediately.  Set it to 0 before hibernate to avoid this
+		 * wakeup event.
+		 */
+		gpio_set_value(musb->config->gpio_vrsel, 0);
+
+	return 0;
+}
+
+static int bfin_resume(struct device *dev)
+{
+	struct bfin_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+
+	bfin_musb_reg_init(musb);
+
+	return 0;
+}
+
+static struct dev_pm_ops bfin_pm_ops = {
+	.suspend	= bfin_suspend,
+	.resume		= bfin_resume,
+};
+
+#define DEV_PM_OPS	&bfin_pm_op,
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver bfin_driver = {
+	.remove		= __exit_p(bfin_remove),
+	.driver		= {
+		.name	= "musb-bfin",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("Blackfin MUSB Glue Layer");
+MODULE_AUTHOR("Bryan Wy <cooloney@kernel.org>");
+MODULE_LICENSE("GPL v2");
+
+static int __init bfin_init(void)
+{
+	return platform_driver_probe(&bfin_driver, bfin_probe);
+}
+subsys_initcall(bfin_init);
+
+static void __exit bfin_exit(void)
+{
+	platform_driver_unregister(&bfin_driver);
+}
+module_exit(bfin_exit);
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index f5a65ff0ac2..de55a3c3259 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -1308,7 +1308,7 @@ dma_controller_create(struct musb *musb, void __iomem *mregs)
 	struct cppi		*controller;
 	struct device		*dev = musb->controller;
 	struct platform_device	*pdev = to_platform_device(dev);
-	int			irq = platform_get_irq(pdev, 1);
+	int			irq = platform_get_irq_byname(pdev, "dma");
 
 	controller = kzalloc(sizeof *controller, GFP_KERNEL);
 	if (!controller)
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 84427bebbf6..69a0da3c8f0 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -29,6 +29,8 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/da8xx.h>
 #include <mach/usb.h>
@@ -78,6 +80,12 @@
 
 #define CFGCHIP2	IO_ADDRESS(DA8XX_SYSCFG0_BASE + DA8XX_CFGCHIP2_REG)
 
+struct da8xx_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+};
+
 /*
  * REVISIT (PM): we should be able to keep the PHY in low power mode most
  * of the time (24 MHz oscillator and PLL off, etc.) by setting POWER.D0
@@ -131,9 +139,9 @@ static inline void phy_off(void)
  */
 
 /**
- * musb_platform_enable - enable interrupts
+ * da8xx_musb_enable - enable interrupts
  */
-void musb_platform_enable(struct musb *musb)
+static void da8xx_musb_enable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 mask;
@@ -151,9 +159,9 @@ void musb_platform_enable(struct musb *musb)
 }
 
 /**
- * musb_platform_disable - disable HDRC and flush interrupts
+ * da8xx_musb_disable - disable HDRC and flush interrupts
  */
-void musb_platform_disable(struct musb *musb)
+static void da8xx_musb_disable(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 
@@ -170,7 +178,7 @@ void musb_platform_disable(struct musb *musb)
 #define portstate(stmt)
 #endif
 
-static void da8xx_set_vbus(struct musb *musb, int is_on)
+static void da8xx_musb_set_vbus(struct musb *musb, int is_on)
 {
 	WARN_ON(is_on && is_peripheral_active(musb));
 }
@@ -252,7 +260,7 @@ static void otg_timer(unsigned long _musb)
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void da8xx_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	static unsigned long last_timer;
 
@@ -282,7 +290,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 	mod_timer(&otg_workaround, timeout);
 }
 
-static irqreturn_t da8xx_interrupt(int irq, void *hci)
+static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
 {
 	struct musb		*musb = hci;
 	void __iomem		*reg_base = musb->ctrl_base;
@@ -380,7 +388,7 @@ static irqreturn_t da8xx_interrupt(int irq, void *hci)
 	return ret;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int da8xx_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	u32 cfgchip2 = __raw_readl(CFGCHIP2);
 
@@ -409,15 +417,13 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return 0;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int da8xx_musb_init(struct musb *musb)
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 rev;
 
 	musb->mregs += DA8XX_MENTOR_CORE_OFFSET;
 
-	clk_enable(musb->clock);
-
 	/* Returns zero if e.g. not clocked */
 	rev = musb_readl(reg_base, DA8XX_USB_REVISION_REG);
 	if (!rev)
@@ -431,8 +437,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
 
-	musb->board_set_vbus = da8xx_set_vbus;
-
 	/* Reset the controller */
 	musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
 
@@ -446,14 +450,13 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 		 rev, __raw_readl(CFGCHIP2),
 		 musb_readb(reg_base, DA8XX_USB_CTRL_REG));
 
-	musb->isr = da8xx_interrupt;
+	musb->isr = da8xx_musb_interrupt;
 	return 0;
 fail:
-	clk_disable(musb->clock);
 	return -ENODEV;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int da8xx_musb_exit(struct musb *musb)
 {
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
@@ -463,7 +466,140 @@ int musb_platform_exit(struct musb *musb)
 	otg_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
-	clk_disable(musb->clock);
+	return 0;
+}
+
+static const struct musb_platform_ops da8xx_ops = {
+	.init		= da8xx_musb_init,
+	.exit		= da8xx_musb_exit,
+
+	.enable		= da8xx_musb_enable,
+	.disable	= da8xx_musb_disable,
+
+	.set_mode	= da8xx_musb_set_mode,
+	.try_idle	= da8xx_musb_try_idle,
+
+	.set_vbus	= da8xx_musb_set_vbus,
+};
+
+static u64 da8xx_dmamask = DMA_BIT_MASK(32);
+
+static int __init da8xx_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct da8xx_glue		*glue;
+
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	clk = clk_get(&pdev->dev, "usb20");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err2;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err3;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &da8xx_dmamask;
+	musb->dev.coherent_dma_mask	= da8xx_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &da8xx_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err4;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err4;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	clk_disable(clk);
+
+err3:
+	clk_put(clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit da8xx_remove(struct platform_device *pdev)
+{
+	struct da8xx_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_put(glue->clk);
+	kfree(glue);
 
 	return 0;
 }
+
+static struct platform_driver da8xx_driver = {
+	.remove		= __exit_p(da8xx_remove),
+	.driver		= {
+		.name	= "musb-da8xx",
+	},
+};
+
+MODULE_DESCRIPTION("DA8xx/OMAP-L1x MUSB Glue Layer");
+MODULE_AUTHOR("Sergei Shtylyov <sshtylyov@ru.mvista.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init da8xx_init(void)
+{
+	return platform_driver_probe(&da8xx_driver, da8xx_probe);
+}
+subsys_initcall(da8xx_init);
+
+static void __exit da8xx_exit(void)
+{
+	platform_driver_unregister(&da8xx_driver);
+}
+module_exit(da8xx_exit);
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 6e67629f50c..e6de097fb7e 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -30,6 +30,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/hardware.h>
 #include <mach/memory.h>
@@ -51,6 +53,12 @@
 #define USB_PHY_CTRL	IO_ADDRESS(USBPHY_CTL_PADDR)
 #define DM355_DEEPSLEEP	IO_ADDRESS(DM355_DEEPSLEEP_PADDR)
 
+struct davinci_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+};
+
 /* REVISIT (PM) we should be able to keep the PHY in low power mode most
  * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0
  * and, when in host mode, autosuspending idle root ports... PHYPLLON
@@ -83,7 +91,7 @@ static inline void phy_off(void)
 
 static int dma_off = 1;
 
-void musb_platform_enable(struct musb *musb)
+static void davinci_musb_enable(struct musb *musb)
 {
 	u32	tmp, old, val;
 
@@ -116,7 +124,7 @@ void musb_platform_enable(struct musb *musb)
 /*
  * Disable the HDRC and flush interrupts
  */
-void musb_platform_disable(struct musb *musb)
+static void davinci_musb_disable(struct musb *musb)
 {
 	/* because we don't set CTRLR.UINT, "important" to:
 	 *  - not read/write INTRUSB/INTRUSBE
@@ -167,7 +175,7 @@ static void evm_deferred_drvvbus(struct work_struct *ignored)
 
 #endif	/* EVM */
 
-static void davinci_source_power(struct musb *musb, int is_on, int immediate)
+static void davinci_musb_source_power(struct musb *musb, int is_on, int immediate)
 {
 #ifdef CONFIG_MACH_DAVINCI_EVM
 	if (is_on)
@@ -190,10 +198,10 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate)
 #endif
 }
 
-static void davinci_set_vbus(struct musb *musb, int is_on)
+static void davinci_musb_set_vbus(struct musb *musb, int is_on)
 {
 	WARN_ON(is_on && is_peripheral_active(musb));
-	davinci_source_power(musb, is_on, 0);
+	davinci_musb_source_power(musb, is_on, 0);
 }
 
 
@@ -259,7 +267,7 @@ static void otg_timer(unsigned long _musb)
 	spin_unlock_irqrestore(&musb->lock, flags);
 }
 
-static irqreturn_t davinci_interrupt(int irq, void *__hci)
+static irqreturn_t davinci_musb_interrupt(int irq, void *__hci)
 {
 	unsigned long	flags;
 	irqreturn_t	retval = IRQ_NONE;
@@ -345,7 +353,7 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 		/* NOTE:  this must complete poweron within 100 msec
 		 * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
 		 */
-		davinci_source_power(musb, drvvbus, 0);
+		davinci_musb_source_power(musb, drvvbus, 0);
 		DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
 				drvvbus ? "on" : "off",
 				otg_state_string(musb),
@@ -370,13 +378,13 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
 	return retval;
 }
 
-int musb_platform_set_mode(struct musb *musb, u8 mode)
+static int davinci_musb_set_mode(struct musb *musb, u8 mode)
 {
 	/* EVM can't do this (right?) */
 	return -EIO;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int davinci_musb_init(struct musb *musb)
 {
 	void __iomem	*tibase = musb->ctrl_base;
 	u32		revision;
@@ -388,8 +396,6 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 
 	musb->mregs += DAVINCI_BASE_OFFSET;
 
-	clk_enable(musb->clock);
-
 	/* returns zero if e.g. not clocked */
 	revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG);
 	if (revision == 0)
@@ -398,8 +404,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	if (is_host_enabled(musb))
 		setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
 
-	musb->board_set_vbus = davinci_set_vbus;
-	davinci_source_power(musb, 0, 1);
+	davinci_musb_source_power(musb, 0, 1);
 
 	/* dm355 EVM swaps D+/D- for signal integrity, and
 	 * is clocked from the main 24 MHz crystal.
@@ -440,18 +445,16 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 		revision, __raw_readl(USB_PHY_CTRL),
 		musb_readb(tibase, DAVINCI_USB_CTRL_REG));
 
-	musb->isr = davinci_interrupt;
+	musb->isr = davinci_musb_interrupt;
 	return 0;
 
 fail:
-	clk_disable(musb->clock);
-
 	otg_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 	return -ENODEV;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int davinci_musb_exit(struct musb *musb)
 {
 	if (is_host_enabled(musb))
 		del_timer_sync(&otg_workaround);
@@ -465,7 +468,7 @@ int musb_platform_exit(struct musb *musb)
 		__raw_writel(deepsleep, DM355_DEEPSLEEP);
 	}
 
-	davinci_source_power(musb, 0 /*off*/, 1);
+	davinci_musb_source_power(musb, 0 /*off*/, 1);
 
 	/* delay, to avoid problems with module reload */
 	if (is_host_enabled(musb) && musb->xceiv->default_a) {
@@ -495,10 +498,141 @@ int musb_platform_exit(struct musb *musb)
 
 	phy_off();
 
-	clk_disable(musb->clock);
-
 	otg_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
 	return 0;
 }
+
+static const struct musb_platform_ops davinci_ops = {
+	.init		= davinci_musb_init,
+	.exit		= davinci_musb_exit,
+
+	.enable		= davinci_musb_enable,
+	.disable	= davinci_musb_disable,
+
+	.set_mode	= davinci_musb_set_mode,
+
+	.set_vbus	= davinci_musb_set_vbus,
+};
+
+static u64 davinci_dmamask = DMA_BIT_MASK(32);
+
+static int __init davinci_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct davinci_glue		*glue;
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	clk = clk_get(&pdev->dev, "usb");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err2;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err3;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &davinci_dmamask;
+	musb->dev.coherent_dma_mask	= davinci_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &davinci_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err4;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err4;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	clk_disable(clk);
+
+err3:
+	clk_put(clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit davinci_remove(struct platform_device *pdev)
+{
+	struct davinci_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_put(glue->clk);
+	kfree(glue);
+
+	return 0;
+}
+
+static struct platform_driver davinci_driver = {
+	.remove		= __exit_p(davinci_remove),
+	.driver		= {
+		.name	= "musb-davinci",
+	},
+};
+
+MODULE_DESCRIPTION("DaVinci MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init davinci_init(void)
+{
+	return platform_driver_probe(&davinci_driver, davinci_probe);
+}
+subsys_initcall(davinci_init);
+
+static void __exit davinci_exit(void)
+{
+	platform_driver_unregister(&davinci_driver);
+}
+module_exit(davinci_exit);
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c9f9024c551..07cf394e491 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -99,19 +99,8 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#ifdef	CONFIG_ARM
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/mach-types.h>
-#endif
-
 #include "musb_core.h"
 
-
-#ifdef CONFIG_ARCH_DAVINCI
-#include "davinci.h"
-#endif
-
 #define TA_WAIT_BCON(m) max_t(int, (m)->a_wait_bcon, OTG_TIME_A_WAIT_BCON)
 
 
@@ -126,7 +115,7 @@ MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
 
 #define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
 
-#define MUSB_DRIVER_NAME "musb_hdrc"
+#define MUSB_DRIVER_NAME "musb-hdrc"
 const char musb_driver_name[] = MUSB_DRIVER_NAME;
 
 MODULE_DESCRIPTION(DRIVER_INFO);
@@ -230,7 +219,7 @@ static struct otg_io_access_ops musb_ulpi_access = {
 
 /*-------------------------------------------------------------------------*/
 
-#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN)
+#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
 
 /*
  * Load an endpoint's FIFO
@@ -390,7 +379,7 @@ void musb_otg_timer_func(unsigned long data)
 	case OTG_STATE_A_SUSPEND:
 	case OTG_STATE_A_WAIT_BCON:
 		DBG(1, "HNP: %s timeout\n", otg_state_string(musb));
-		musb_set_vbus(musb, 0);
+		musb_platform_set_vbus(musb, 0);
 		musb->xceiv->state = OTG_STATE_A_WAIT_VFALL;
 		break;
 	default:
@@ -552,7 +541,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 	if (int_usb & MUSB_INTR_SESSREQ) {
 		void __iomem *mbase = musb->mregs;
 
-		if (devctl & MUSB_DEVCTL_BDEVICE) {
+		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS
+				&& (devctl & MUSB_DEVCTL_BDEVICE)) {
 			DBG(3, "SessReq while on B state\n");
 			return IRQ_HANDLED;
 		}
@@ -570,7 +560,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 		musb->ep0_stage = MUSB_EP0_START;
 		musb->xceiv->state = OTG_STATE_A_IDLE;
 		MUSB_HST_MODE(musb);
-		musb_set_vbus(musb, 1);
+		musb_platform_set_vbus(musb, 1);
 
 		handled = IRQ_HANDLED;
 	}
@@ -641,7 +631,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 
 		/* go through A_WAIT_VFALL then start a new session */
 		if (!ignore)
-			musb_set_vbus(musb, 0);
+			musb_platform_set_vbus(musb, 0);
 		handled = IRQ_HANDLED;
 	}
 
@@ -1048,10 +1038,13 @@ static void musb_shutdown(struct platform_device *pdev)
 	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
-	if (musb->clock)
-		clk_put(musb->clock);
 	spin_unlock_irqrestore(&musb->lock, flags);
 
+	if (!is_otg_enabled(musb) && is_host_enabled(musb))
+		usb_remove_hcd(musb_to_hcd(musb));
+	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+	musb_platform_exit(musb);
+
 	/* FIXME power down */
 }
 
@@ -1068,10 +1061,11 @@ static void musb_shutdown(struct platform_device *pdev)
  * We don't currently use dynamic fifo setup capability to do anything
  * more than selecting one of a bunch of predefined configurations.
  */
-#if defined(CONFIG_USB_TUSB6010) || \
-	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) \
-	|| defined(CONFIG_ARCH_OMAP4)
+#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_OMAP2PLUS) \
+	|| defined(CONFIG_USB_MUSB_AM35X)
 static ushort __initdata fifo_mode = 4;
+#elif defined(CONFIG_USB_MUSB_UX500)
+static ushort __initdata fifo_mode = 5;
 #else
 static ushort __initdata fifo_mode = 2;
 #endif
@@ -1495,7 +1489,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 		struct musb_hw_ep	*hw_ep = musb->endpoints + i;
 
 		hw_ep->fifo = MUSB_FIFO_OFFSET(i) + mbase;
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 		hw_ep->fifo_async = musb->async + 0x400 + MUSB_FIFO_OFFSET(i);
 		hw_ep->fifo_sync = musb->sync + 0x400 + MUSB_FIFO_OFFSET(i);
 		hw_ep->fifo_sync_va =
@@ -1542,7 +1536,8 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || \
-	defined(CONFIG_ARCH_OMAP4)
+	defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_ARCH_U8500) || \
+	defined(CONFIG_ARCH_U5500)
 
 static irqreturn_t generic_interrupt(int irq, void *__hci)
 {
@@ -1898,6 +1893,7 @@ allocate_instance(struct device *dev,
 	}
 
 	musb->controller = dev;
+
 	return musb;
 }
 
@@ -1994,30 +1990,14 @@ bad_config:
 	spin_lock_init(&musb->lock);
 	musb->board_mode = plat->mode;
 	musb->board_set_power = plat->set_power;
-	musb->set_clock = plat->set_clock;
 	musb->min_power = plat->min_power;
-
-	/* Clock usage is chip-specific ... functional clock (DaVinci,
-	 * OMAP2430), or PHY ref (some TUSB6010 boards).  All this core
-	 * code does is make sure a clock handle is available; platform
-	 * code manages it during start/stop and suspend/resume.
-	 */
-	if (plat->clock) {
-		musb->clock = clk_get(dev, plat->clock);
-		if (IS_ERR(musb->clock)) {
-			status = PTR_ERR(musb->clock);
-			musb->clock = NULL;
-			goto fail1;
-		}
-	}
+	musb->ops = plat->platform_ops;
 
 	/* The musb_platform_init() call:
 	 *   - adjusts musb->mregs and musb->isr if needed,
 	 *   - may initialize an integrated tranceiver
 	 *   - initializes musb->xceiv, usually by otg_get_transceiver()
-	 *   - activates clocks.
 	 *   - stops powering VBUS
-	 *   - assigns musb->board_set_vbus if host mode is enabled
 	 *
 	 * There are various transciever configurations.  Blackfin,
 	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
@@ -2025,9 +2005,9 @@ bad_config:
 	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.
 	 */
 	musb->isr = generic_interrupt;
-	status = musb_platform_init(musb, plat->board_data);
+	status = musb_platform_init(musb);
 	if (status < 0)
-		goto fail2;
+		goto fail1;
 
 	if (!musb->isr) {
 		status = -ENODEV;
@@ -2110,12 +2090,15 @@ bad_config:
 	 * Otherwise, wait till the gadget driver hooks up.
 	 */
 	if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+		struct usb_hcd	*hcd = musb_to_hcd(musb);
+
 		MUSB_HST_MODE(musb);
 		musb->xceiv->default_a = 1;
 		musb->xceiv->state = OTG_STATE_A_IDLE;
 
 		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
 
+		hcd->self.uses_pio_for_control = 1;
 		DBG(1, "%s mode, status %d, devctl %02x %c\n",
 			"HOST", status,
 			musb_readb(musb->mregs, MUSB_DEVCTL),
@@ -2177,10 +2160,6 @@ fail3:
 		device_init_wakeup(dev, 0);
 	musb_platform_exit(musb);
 
-fail2:
-	if (musb->clock)
-		clk_put(musb->clock);
-
 fail1:
 	dev_err(musb->controller,
 		"musb_init_controller failed with status %d\n", status);
@@ -2206,7 +2185,7 @@ static u64	*orig_dma_mask;
 static int __init musb_probe(struct platform_device *pdev)
 {
 	struct device	*dev = &pdev->dev;
-	int		irq = platform_get_irq(pdev, 0);
+	int		irq = platform_get_irq_byname(pdev, "mc");
 	int		status;
 	struct resource	*iomem;
 	void __iomem	*base;
@@ -2244,13 +2223,6 @@ static int __exit musb_remove(struct platform_device *pdev)
 	 */
 	musb_exit_debugfs(musb);
 	musb_shutdown(pdev);
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-	if (musb->board_mode == MUSB_HOST)
-		usb_remove_hcd(musb_to_hcd(musb));
-#endif
-	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
-	musb_platform_exit(musb);
-	musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
 
 	musb_free(musb);
 	iounmap(ctrl_base);
@@ -2263,144 +2235,138 @@ static int __exit musb_remove(struct platform_device *pdev)
 
 #ifdef	CONFIG_PM
 
-static struct musb_context_registers musb_context;
-
-void musb_save_context(struct musb *musb)
+static void musb_save_context(struct musb *musb)
 {
 	int i;
 	void __iomem *musb_base = musb->mregs;
 	void __iomem *epio;
 
 	if (is_host_enabled(musb)) {
-		musb_context.frame = musb_readw(musb_base, MUSB_FRAME);
-		musb_context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
-		musb_context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
+		musb->context.frame = musb_readw(musb_base, MUSB_FRAME);
+		musb->context.testmode = musb_readb(musb_base, MUSB_TESTMODE);
+		musb->context.busctl = musb_read_ulpi_buscontrol(musb->mregs);
 	}
-	musb_context.power = musb_readb(musb_base, MUSB_POWER);
-	musb_context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
-	musb_context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
-	musb_context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
-	musb_context.index = musb_readb(musb_base, MUSB_INDEX);
-	musb_context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
+	musb->context.power = musb_readb(musb_base, MUSB_POWER);
+	musb->context.intrtxe = musb_readw(musb_base, MUSB_INTRTXE);
+	musb->context.intrrxe = musb_readw(musb_base, MUSB_INTRRXE);
+	musb->context.intrusbe = musb_readb(musb_base, MUSB_INTRUSBE);
+	musb->context.index = musb_readb(musb_base, MUSB_INDEX);
+	musb->context.devctl = musb_readb(musb_base, MUSB_DEVCTL);
 
 	for (i = 0; i < musb->config->num_eps; ++i) {
 		epio = musb->endpoints[i].regs;
-		musb_context.index_regs[i].txmaxp =
+		musb->context.index_regs[i].txmaxp =
 			musb_readw(epio, MUSB_TXMAXP);
-		musb_context.index_regs[i].txcsr =
+		musb->context.index_regs[i].txcsr =
 			musb_readw(epio, MUSB_TXCSR);
-		musb_context.index_regs[i].rxmaxp =
+		musb->context.index_regs[i].rxmaxp =
 			musb_readw(epio, MUSB_RXMAXP);
-		musb_context.index_regs[i].rxcsr =
+		musb->context.index_regs[i].rxcsr =
 			musb_readw(epio, MUSB_RXCSR);
 
 		if (musb->dyn_fifo) {
-			musb_context.index_regs[i].txfifoadd =
+			musb->context.index_regs[i].txfifoadd =
 					musb_read_txfifoadd(musb_base);
-			musb_context.index_regs[i].rxfifoadd =
+			musb->context.index_regs[i].rxfifoadd =
 					musb_read_rxfifoadd(musb_base);
-			musb_context.index_regs[i].txfifosz =
+			musb->context.index_regs[i].txfifosz =
 					musb_read_txfifosz(musb_base);
-			musb_context.index_regs[i].rxfifosz =
+			musb->context.index_regs[i].rxfifosz =
 					musb_read_rxfifosz(musb_base);
 		}
 		if (is_host_enabled(musb)) {
-			musb_context.index_regs[i].txtype =
+			musb->context.index_regs[i].txtype =
 				musb_readb(epio, MUSB_TXTYPE);
-			musb_context.index_regs[i].txinterval =
+			musb->context.index_regs[i].txinterval =
 				musb_readb(epio, MUSB_TXINTERVAL);
-			musb_context.index_regs[i].rxtype =
+			musb->context.index_regs[i].rxtype =
 				musb_readb(epio, MUSB_RXTYPE);
-			musb_context.index_regs[i].rxinterval =
+			musb->context.index_regs[i].rxinterval =
 				musb_readb(epio, MUSB_RXINTERVAL);
 
-			musb_context.index_regs[i].txfunaddr =
+			musb->context.index_regs[i].txfunaddr =
 				musb_read_txfunaddr(musb_base, i);
-			musb_context.index_regs[i].txhubaddr =
+			musb->context.index_regs[i].txhubaddr =
 				musb_read_txhubaddr(musb_base, i);
-			musb_context.index_regs[i].txhubport =
+			musb->context.index_regs[i].txhubport =
 				musb_read_txhubport(musb_base, i);
 
-			musb_context.index_regs[i].rxfunaddr =
+			musb->context.index_regs[i].rxfunaddr =
 				musb_read_rxfunaddr(musb_base, i);
-			musb_context.index_regs[i].rxhubaddr =
+			musb->context.index_regs[i].rxhubaddr =
 				musb_read_rxhubaddr(musb_base, i);
-			musb_context.index_regs[i].rxhubport =
+			musb->context.index_regs[i].rxhubport =
 				musb_read_rxhubport(musb_base, i);
 		}
 	}
-
-	musb_platform_save_context(musb, &musb_context);
 }
 
-void musb_restore_context(struct musb *musb)
+static void musb_restore_context(struct musb *musb)
 {
 	int i;
 	void __iomem *musb_base = musb->mregs;
 	void __iomem *ep_target_regs;
 	void __iomem *epio;
 
-	musb_platform_restore_context(musb, &musb_context);
-
 	if (is_host_enabled(musb)) {
-		musb_writew(musb_base, MUSB_FRAME, musb_context.frame);
-		musb_writeb(musb_base, MUSB_TESTMODE, musb_context.testmode);
-		musb_write_ulpi_buscontrol(musb->mregs, musb_context.busctl);
+		musb_writew(musb_base, MUSB_FRAME, musb->context.frame);
+		musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode);
+		musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl);
 	}
-	musb_writeb(musb_base, MUSB_POWER, musb_context.power);
-	musb_writew(musb_base, MUSB_INTRTXE, musb_context.intrtxe);
-	musb_writew(musb_base, MUSB_INTRRXE, musb_context.intrrxe);
-	musb_writeb(musb_base, MUSB_INTRUSBE, musb_context.intrusbe);
-	musb_writeb(musb_base, MUSB_DEVCTL, musb_context.devctl);
+	musb_writeb(musb_base, MUSB_POWER, musb->context.power);
+	musb_writew(musb_base, MUSB_INTRTXE, musb->context.intrtxe);
+	musb_writew(musb_base, MUSB_INTRRXE, musb->context.intrrxe);
+	musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe);
+	musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl);
 
 	for (i = 0; i < musb->config->num_eps; ++i) {
 		epio = musb->endpoints[i].regs;
 		musb_writew(epio, MUSB_TXMAXP,
-			musb_context.index_regs[i].txmaxp);
+			musb->context.index_regs[i].txmaxp);
 		musb_writew(epio, MUSB_TXCSR,
-			musb_context.index_regs[i].txcsr);
+			musb->context.index_regs[i].txcsr);
 		musb_writew(epio, MUSB_RXMAXP,
-			musb_context.index_regs[i].rxmaxp);
+			musb->context.index_regs[i].rxmaxp);
 		musb_writew(epio, MUSB_RXCSR,
-			musb_context.index_regs[i].rxcsr);
+			musb->context.index_regs[i].rxcsr);
 
 		if (musb->dyn_fifo) {
 			musb_write_txfifosz(musb_base,
-				musb_context.index_regs[i].txfifosz);
+				musb->context.index_regs[i].txfifosz);
 			musb_write_rxfifosz(musb_base,
-				musb_context.index_regs[i].rxfifosz);
+				musb->context.index_regs[i].rxfifosz);
 			musb_write_txfifoadd(musb_base,
-				musb_context.index_regs[i].txfifoadd);
+				musb->context.index_regs[i].txfifoadd);
 			musb_write_rxfifoadd(musb_base,
-				musb_context.index_regs[i].rxfifoadd);
+				musb->context.index_regs[i].rxfifoadd);
 		}
 
 		if (is_host_enabled(musb)) {
 			musb_writeb(epio, MUSB_TXTYPE,
-				musb_context.index_regs[i].txtype);
+				musb->context.index_regs[i].txtype);
 			musb_writeb(epio, MUSB_TXINTERVAL,
-				musb_context.index_regs[i].txinterval);
+				musb->context.index_regs[i].txinterval);
 			musb_writeb(epio, MUSB_RXTYPE,
-				musb_context.index_regs[i].rxtype);
+				musb->context.index_regs[i].rxtype);
 			musb_writeb(epio, MUSB_RXINTERVAL,
 
-			musb_context.index_regs[i].rxinterval);
+			musb->context.index_regs[i].rxinterval);
 			musb_write_txfunaddr(musb_base, i,
-				musb_context.index_regs[i].txfunaddr);
+				musb->context.index_regs[i].txfunaddr);
 			musb_write_txhubaddr(musb_base, i,
-				musb_context.index_regs[i].txhubaddr);
+				musb->context.index_regs[i].txhubaddr);
 			musb_write_txhubport(musb_base, i,
-				musb_context.index_regs[i].txhubport);
+				musb->context.index_regs[i].txhubport);
 
 			ep_target_regs =
 				musb_read_target_reg_base(i, musb_base);
 
 			musb_write_rxfunaddr(ep_target_regs,
-				musb_context.index_regs[i].rxfunaddr);
+				musb->context.index_regs[i].rxfunaddr);
 			musb_write_rxhubaddr(ep_target_regs,
-				musb_context.index_regs[i].rxhubaddr);
+				musb->context.index_regs[i].rxhubaddr);
 			musb_write_rxhubport(ep_target_regs,
-				musb_context.index_regs[i].rxhubport);
+				musb->context.index_regs[i].rxhubport);
 		}
 	}
 }
@@ -2411,9 +2377,6 @@ static int musb_suspend(struct device *dev)
 	unsigned long	flags;
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 
-	if (!musb->clock)
-		return 0;
-
 	spin_lock_irqsave(&musb->lock, flags);
 
 	if (is_peripheral_active(musb)) {
@@ -2428,10 +2391,6 @@ static int musb_suspend(struct device *dev)
 
 	musb_save_context(musb);
 
-	if (musb->set_clock)
-		musb->set_clock(musb->clock, 0);
-	else
-		clk_disable(musb->clock);
 	spin_unlock_irqrestore(&musb->lock, flags);
 	return 0;
 }
@@ -2441,14 +2400,6 @@ static int musb_resume_noirq(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct musb	*musb = dev_to_musb(&pdev->dev);
 
-	if (!musb->clock)
-		return 0;
-
-	if (musb->set_clock)
-		musb->set_clock(musb->clock, 1);
-	else
-		clk_enable(musb->clock);
-
 	musb_restore_context(musb);
 
 	/* for static cmos like DaVinci, register values were preserved
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 69797e5b46a..d0c236f8e19 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -222,7 +222,7 @@ enum musb_g_ep0_state {
 #endif
 
 /* TUSB mapping: "flat" plus ep0 special cases */
-#if	defined(CONFIG_USB_TUSB6010)
+#if	defined(CONFIG_USB_MUSB_TUSB6010)
 #define musb_ep_select(_mbase, _epnum) \
 	musb_writeb((_mbase), MUSB_INDEX, (_epnum))
 #define	MUSB_EP_OFFSET			MUSB_TUSB_OFFSET
@@ -253,6 +253,29 @@ enum musb_g_ep0_state {
 
 /******************************** TYPES *************************************/
 
+/**
+ * struct musb_platform_ops - Operations passed to musb_core by HW glue layer
+ * @init:	turns on clocks, sets up platform-specific registers, etc
+ * @exit:	undoes @init
+ * @set_mode:	forcefully changes operating mode
+ * @try_ilde:	tries to idle the IP
+ * @vbus_status: returns vbus status if possible
+ * @set_vbus:	forces vbus status
+ */
+struct musb_platform_ops {
+	int	(*init)(struct musb *musb);
+	int	(*exit)(struct musb *musb);
+
+	void	(*enable)(struct musb *musb);
+	void	(*disable)(struct musb *musb);
+
+	int	(*set_mode)(struct musb *musb, u8 mode);
+	void	(*try_idle)(struct musb *musb, unsigned long timeout);
+
+	int	(*vbus_status)(struct musb *musb);
+	void	(*set_vbus)(struct musb *musb, int on);
+};
+
 /*
  * struct musb_hw_ep - endpoint hardware (bidirectional)
  *
@@ -263,7 +286,7 @@ struct musb_hw_ep {
 	void __iomem		*fifo;
 	void __iomem		*regs;
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 	void __iomem		*conf;
 #endif
 
@@ -280,7 +303,7 @@ struct musb_hw_ep {
 	struct dma_channel	*tx_channel;
 	struct dma_channel	*rx_channel;
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 	/* TUSB has "asynchronous" and "synchronous" dma modes */
 	dma_addr_t		fifo_async;
 	dma_addr_t		fifo_sync;
@@ -323,14 +346,43 @@ static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep)
 #endif
 }
 
+struct musb_csr_regs {
+	/* FIFO registers */
+	u16 txmaxp, txcsr, rxmaxp, rxcsr;
+	u16 rxfifoadd, txfifoadd;
+	u8 txtype, txinterval, rxtype, rxinterval;
+	u8 rxfifosz, txfifosz;
+	u8 txfunaddr, txhubaddr, txhubport;
+	u8 rxfunaddr, rxhubaddr, rxhubport;
+};
+
+struct musb_context_registers {
+
+#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
+    defined(CONFIG_ARCH_OMAP4)
+	u32 otg_sysconfig, otg_forcestandby;
+#endif
+	u8 power;
+	u16 intrtxe, intrrxe;
+	u8 intrusbe;
+	u16 frame;
+	u8 index, testmode;
+
+	u8 devctl, busctl, misc;
+
+	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
+};
+
 /*
  * struct musb - Driver instance data.
  */
 struct musb {
 	/* device lock */
 	spinlock_t		lock;
-	struct clk		*clock;
-	struct clk		*phy_clock;
+
+	const struct musb_platform_ops *ops;
+	struct musb_context_registers context;
+
 	irqreturn_t		(*isr)(int, void *);
 	struct work_struct	irq_work;
 	u16			hwvers;
@@ -359,11 +411,7 @@ struct musb {
 
 	struct timer_list	otg_timer;
 #endif
-
-	/* called with IRQs blocked; ON/nonzero implies starting a session,
-	 * and waiting at least a_wait_vrise_tmout.
-	 */
-	void			(*board_set_vbus)(struct musb *, int is_on);
+	struct notifier_block	nb;
 
 	struct dma_controller	*dma_controller;
 
@@ -371,7 +419,7 @@ struct musb {
 	void __iomem		*ctrl_base;
 	void __iomem		*mregs;
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 	dma_addr_t		async;
 	dma_addr_t		sync;
 	void __iomem		*sync_va;
@@ -398,8 +446,6 @@ struct musb {
 	u8 board_mode;		/* enum musb_mode */
 	int			(*board_set_power)(int state);
 
-	int			(*set_clock)(struct clk *clk, int is_active);
-
 	u8			min_power;	/* vbus for periph, in mA/2 */
 
 	bool			is_host;
@@ -458,52 +504,6 @@ struct musb {
 #endif
 };
 
-#ifdef CONFIG_PM
-struct musb_csr_regs {
-	/* FIFO registers */
-	u16 txmaxp, txcsr, rxmaxp, rxcsr;
-	u16 rxfifoadd, txfifoadd;
-	u8 txtype, txinterval, rxtype, rxinterval;
-	u8 rxfifosz, txfifosz;
-	u8 txfunaddr, txhubaddr, txhubport;
-	u8 rxfunaddr, rxhubaddr, rxhubport;
-};
-
-struct musb_context_registers {
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-    defined(CONFIG_ARCH_OMAP4)
-	u32 otg_sysconfig, otg_forcestandby;
-#endif
-	u8 power;
-	u16 intrtxe, intrrxe;
-	u8 intrusbe;
-	u16 frame;
-	u8 index, testmode;
-
-	u8 devctl, busctl, misc;
-
-	struct musb_csr_regs index_regs[MUSB_C_NUM_EPS];
-};
-
-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-    defined(CONFIG_ARCH_OMAP4)
-extern void musb_platform_save_context(struct musb *musb,
-		struct musb_context_registers *musb_context);
-extern void musb_platform_restore_context(struct musb *musb,
-		struct musb_context_registers *musb_context);
-#else
-#define musb_platform_save_context(m, x)	do {} while (0)
-#define musb_platform_restore_context(m, x)	do {} while (0)
-#endif
-
-#endif
-
-static inline void musb_set_vbus(struct musb *musb, int is_on)
-{
-	musb->board_set_vbus(musb, is_on);
-}
-
 #ifdef CONFIG_USB_GADGET_MUSB_HDRC
 static inline struct musb *gadget_to_musb(struct usb_gadget *g)
 {
@@ -592,29 +592,63 @@ extern void musb_load_testpacket(struct musb *);
 
 extern irqreturn_t musb_interrupt(struct musb *);
 
-extern void musb_platform_enable(struct musb *musb);
-extern void musb_platform_disable(struct musb *musb);
-
 extern void musb_hnp_stop(struct musb *musb);
 
-extern int musb_platform_set_mode(struct musb *musb, u8 musb_mode);
+static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
+{
+	if (musb->ops->set_vbus)
+		musb->ops->set_vbus(musb, is_on);
+}
 
-#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN) || \
-	defined(CONFIG_ARCH_DAVINCI_DA8XX) || \
-	defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
-	defined(CONFIG_ARCH_OMAP4)
-extern void musb_platform_try_idle(struct musb *musb, unsigned long timeout);
-#else
-#define musb_platform_try_idle(x, y)		do {} while (0)
-#endif
+static inline void musb_platform_enable(struct musb *musb)
+{
+	if (musb->ops->enable)
+		musb->ops->enable(musb);
+}
 
-#if defined(CONFIG_USB_TUSB6010) || defined(CONFIG_BLACKFIN)
-extern int musb_platform_get_vbus_status(struct musb *musb);
-#else
-#define musb_platform_get_vbus_status(x)	0
-#endif
+static inline void musb_platform_disable(struct musb *musb)
+{
+	if (musb->ops->disable)
+		musb->ops->disable(musb);
+}
+
+static inline int musb_platform_set_mode(struct musb *musb, u8 mode)
+{
+	if (!musb->ops->set_mode)
+		return 0;
+
+	return musb->ops->set_mode(musb, mode);
+}
+
+static inline void musb_platform_try_idle(struct musb *musb,
+		unsigned long timeout)
+{
+	if (musb->ops->try_idle)
+		musb->ops->try_idle(musb, timeout);
+}
+
+static inline int musb_platform_get_vbus_status(struct musb *musb)
+{
+	if (!musb->ops->vbus_status)
+		return 0;
 
-extern int __init musb_platform_init(struct musb *musb, void *board_data);
-extern int musb_platform_exit(struct musb *musb);
+	return musb->ops->vbus_status(musb);
+}
+
+static inline int musb_platform_init(struct musb *musb)
+{
+	if (!musb->ops->init)
+		return -EINVAL;
+
+	return musb->ops->init(musb);
+}
+
+static inline int musb_platform_exit(struct musb *musb)
+{
+	if (!musb->ops->exit)
+		return -EINVAL;
+
+	return musb->ops->exit(musb);
+}
 
 #endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 5d815049cba..9b162dfaa4f 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -92,6 +92,59 @@
 
 /* ----------------------------------------------------------------------- */
 
+/* Maps the buffer to dma  */
+
+static inline void map_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		request->request.dma = dma_map_single(
+				musb->controller,
+				request->request.buf,
+				request->request.length,
+				request->tx
+					? DMA_TO_DEVICE
+					: DMA_FROM_DEVICE);
+		request->mapped = 1;
+	} else {
+		dma_sync_single_for_device(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->mapped = 0;
+	}
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+				struct musb *musb)
+{
+	if (request->request.dma == DMA_ADDR_INVALID) {
+		DBG(20, "not unmapping a never mapped buffer\n");
+		return;
+	}
+	if (request->mapped) {
+		dma_unmap_single(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+		request->request.dma = DMA_ADDR_INVALID;
+		request->mapped = 0;
+	} else {
+		dma_sync_single_for_cpu(musb->controller,
+			request->request.dma,
+			request->request.length,
+			request->tx
+				? DMA_TO_DEVICE
+				: DMA_FROM_DEVICE);
+
+	}
+}
+
 /*
  * Immediately complete a request.
  *
@@ -119,24 +172,8 @@ __acquires(ep->musb->lock)
 
 	ep->busy = 1;
 	spin_unlock(&musb->lock);
-	if (is_dma_capable()) {
-		if (req->mapped) {
-			dma_unmap_single(musb->controller,
-					req->request.dma,
-					req->request.length,
-					req->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			req->request.dma = DMA_ADDR_INVALID;
-			req->mapped = 0;
-		} else if (req->request.dma != DMA_ADDR_INVALID)
-			dma_sync_single_for_cpu(musb->controller,
-					req->request.dma,
-					req->request.length,
-					req->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-	}
+	if (is_dma_capable() && ep->dma)
+		unmap_dma_buffer(req, musb);
 	if (request->status == 0)
 		DBG(5, "%s done request %p,  %d/%d\n",
 				ep->end_point.name, request,
@@ -395,6 +432,13 @@ static void txstate(struct musb *musb, struct musb_request *req)
 #endif
 
 	if (!use_dma) {
+		/*
+		 * Unmap the dma buffer back to cpu if dma channel
+		 * programming fails
+		 */
+		if (is_dma_capable() && musb_ep->dma)
+			unmap_dma_buffer(req, musb);
+
 		musb_write_fifo(musb_ep->hw_ep, fifo_count,
 				(u8 *) (request->buf + request->actual));
 		request->actual += fifo_count;
@@ -644,10 +688,8 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 	 */
 
 				csr |= MUSB_RXCSR_DMAENAB;
-				if (!musb_ep->hb_mult &&
-					musb_ep->hw_ep->rx_double_buffered)
-					csr |= MUSB_RXCSR_AUTOCLEAR;
 #ifdef USE_MODE1
+				csr |= MUSB_RXCSR_AUTOCLEAR;
 				/* csr |= MUSB_RXCSR_DMAMODE; */
 
 				/* this special sequence (enabling and then
@@ -656,6 +698,10 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 				 */
 				musb_writew(epio, MUSB_RXCSR,
 					csr | MUSB_RXCSR_DMAMODE);
+#else
+				if (!musb_ep->hb_mult &&
+					musb_ep->hw_ep->rx_double_buffered)
+					csr |= MUSB_RXCSR_AUTOCLEAR;
 #endif
 				musb_writew(epio, MUSB_RXCSR, csr);
 
@@ -711,6 +757,21 @@ static void rxstate(struct musb *musb, struct musb_request *req)
 					return;
 			}
 #endif
+			/*
+			 * Unmap the dma buffer back to cpu if dma channel
+			 * programming fails. This buffer is mapped if the
+			 * channel allocation is successful
+			 */
+			 if (is_dma_capable() && musb_ep->dma) {
+				unmap_dma_buffer(req, musb);
+
+				/*
+				 * Clear DMAENAB and AUTOCLEAR for the
+				 * PIO mode transfer
+				 */
+				csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+				musb_writew(epio, MUSB_RXCSR, csr);
+			}
 
 			musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
 					(request->buf + request->actual));
@@ -807,7 +868,7 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 
 #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
 		/* Autoclear doesn't clear RxPktRdy for short packets */
-		if ((dma->desired_mode == 0)
+		if ((dma->desired_mode == 0 && !hw_ep->rx_double_buffered)
 				|| (dma->actual_len
 					& (musb_ep->packet_sz - 1))) {
 			/* ack the read! */
@@ -818,8 +879,16 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 		/* incomplete, and not short? wait for next IN packet */
 		if ((request->actual < request->length)
 				&& (musb_ep->dma->actual_len
-					== musb_ep->packet_sz))
+					== musb_ep->packet_sz)) {
+			/* In double buffer case, continue to unload fifo if
+ 			 * there is Rx packet in FIFO.
+ 			 **/
+			csr = musb_readw(epio, MUSB_RXCSR);
+			if ((csr & MUSB_RXCSR_RXPKTRDY) &&
+				hw_ep->rx_double_buffered)
+				goto exit;
 			return;
+		}
 #endif
 		musb_g_giveback(musb_ep, request, 0);
 
@@ -827,7 +896,9 @@ void musb_g_rx(struct musb *musb, u8 epnum)
 		if (!request)
 			return;
 	}
-
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
+exit:
+#endif
 	/* Analyze request */
 	rxstate(musb, to_musb_request(request));
 }
@@ -916,13 +987,9 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		 * likewise high bandwidth periodic tx
 		 */
 		/* Set TXMAXP with the FIFO size of the endpoint
-		 * to disable double buffering mode. Currently, It seems that double
-		 * buffering has problem if musb RTL revision number < 2.0.
+		 * to disable double buffering mode.
 		 */
-		if (musb->hwvers < MUSB_HWVERS_2000)
-			musb_writew(regs, MUSB_TXMAXP, hw_ep->max_packet_sz_tx);
-		else
-			musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+		musb_writew(regs, MUSB_TXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
 
 		csr = MUSB_TXCSR_MODE | MUSB_TXCSR_CLRDATATOG;
 		if (musb_readw(regs, MUSB_TXCSR)
@@ -958,10 +1025,7 @@ static int musb_gadget_enable(struct usb_ep *ep,
 		/* Set RXMAXP with the FIFO size of the endpoint
 		 * to disable double buffering mode.
 		 */
-		if (musb->hwvers < MUSB_HWVERS_2000)
-			musb_writew(regs, MUSB_RXMAXP, hw_ep->max_packet_sz_rx);
-		else
-			musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
+		musb_writew(regs, MUSB_RXMAXP, musb_ep->packet_sz | (musb_ep->hb_mult << 11));
 
 		/* force shared fifo to OUT-only mode */
 		if (hw_ep->is_shared_fifo) {
@@ -1072,13 +1136,16 @@ struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
 	struct musb_request	*request = NULL;
 
 	request = kzalloc(sizeof *request, gfp_flags);
-	if (request) {
-		INIT_LIST_HEAD(&request->request.list);
-		request->request.dma = DMA_ADDR_INVALID;
-		request->epnum = musb_ep->current_epnum;
-		request->ep = musb_ep;
+	if (!request) {
+		DBG(4, "not enough memory\n");
+		return NULL;
 	}
 
+	INIT_LIST_HEAD(&request->request.list);
+	request->request.dma = DMA_ADDR_INVALID;
+	request->epnum = musb_ep->current_epnum;
+	request->ep = musb_ep;
+
 	return &request->request;
 }
 
@@ -1147,28 +1214,9 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req,
 	request->epnum = musb_ep->current_epnum;
 	request->tx = musb_ep->is_in;
 
-	if (is_dma_capable() && musb_ep->dma) {
-		if (request->request.dma == DMA_ADDR_INVALID) {
-			request->request.dma = dma_map_single(
-					musb->controller,
-					request->request.buf,
-					request->request.length,
-					request->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			request->mapped = 1;
-		} else {
-			dma_sync_single_for_device(musb->controller,
-					request->request.dma,
-					request->request.length,
-					request->tx
-						? DMA_TO_DEVICE
-						: DMA_FROM_DEVICE);
-			request->mapped = 0;
-		}
-	} else if (!req->buf) {
-		return -ENODATA;
-	} else
+	if (is_dma_capable() && musb_ep->dma)
+		map_dma_buffer(request, musb);
+	else
 		request->mapped = 0;
 
 	spin_lock_irqsave(&musb->lock, lockflags);
@@ -1695,8 +1743,10 @@ int __init musb_gadget_setup(struct musb *musb)
 	musb_platform_try_idle(musb, 0);
 
 	status = device_register(&musb->g.dev);
-	if (status != 0)
+	if (status != 0) {
+		put_device(&musb->g.dev);
 		the_gadget = NULL;
+	}
 	return status;
 }
 
@@ -1786,6 +1836,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 		spin_unlock_irqrestore(&musb->lock, flags);
 
 		if (is_otg_enabled(musb)) {
+			struct usb_hcd	*hcd = musb_to_hcd(musb);
+
 			DBG(3, "OTG startup...\n");
 
 			/* REVISIT:  funcall to other code, which also
@@ -1800,6 +1852,8 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 				musb->gadget_driver = NULL;
 				musb->g.dev.driver = NULL;
 				spin_unlock_irqrestore(&musb->lock, flags);
+			} else {
+				hcd->self.uses_pio_for_control = 1;
 			}
 		}
 	}
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index b06e9ef00cf..03c6ccdbb3b 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -74,7 +74,7 @@ static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data)
 	{ __raw_writel(data, addr + offset); }
 
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 
 /*
  * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
@@ -114,7 +114,7 @@ static inline u8 musb_readb(const void __iomem *addr, unsigned offset)
 static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data)
 	{ __raw_writeb(data, addr + offset); }
 
-#endif	/* CONFIG_USB_TUSB6010 */
+#endif	/* CONFIG_USB_MUSB_TUSB6010 */
 
 #else
 
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index 244267527a6..82410703dcd 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -234,7 +234,7 @@
 #define MUSB_TESTMODE		0x0F	/* 8 bit */
 
 /* Get offset for a given FIFO from musb->mregs */
-#ifdef	CONFIG_USB_TUSB6010
+#ifdef	CONFIG_USB_MUSB_TUSB6010
 #define MUSB_FIFO_OFFSET(epnum)	(0x200 + ((epnum) * 0x20))
 #else
 #define MUSB_FIFO_OFFSET(epnum)	(0x20 + ((epnum) * 4))
@@ -295,7 +295,7 @@
 #define MUSB_FLAT_OFFSET(_epnum, _offset)	\
 	(0x100 + (0x10*(_epnum)) + (_offset))
 
-#ifdef CONFIG_USB_TUSB6010
+#ifdef CONFIG_USB_MUSB_TUSB6010
 /* TUSB6010 EP0 configuration register is special */
 #define MUSB_TUSB_OFFSET(_epnum, _offset)	\
 	(0x10 + _offset)
@@ -633,8 +633,9 @@ static inline u8  musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
 	return 0;
 }
 
-static inline void  musb_read_txhubport(void __iomem *mbase, u8 epnum)
+static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
 {
+	return 0;
 }
 
 #endif /* CONFIG_BLACKFIN */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 43233c397b6..b46d1877e28 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -276,7 +276,7 @@ int musb_hub_control(
 			break;
 		case USB_PORT_FEAT_POWER:
 			if (!(is_otg_enabled(musb) && hcd->self.is_b_host))
-				musb_set_vbus(musb, 0);
+				musb_platform_set_vbus(musb, 0);
 			break;
 		case USB_PORT_FEAT_C_CONNECTION:
 		case USB_PORT_FEAT_C_ENABLE:
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 6f771af5cbd..0144a2d481f 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -158,6 +158,8 @@ static int dma_channel_program(struct dma_channel *channel,
 				dma_addr_t dma_addr, u32 len)
 {
 	struct musb_dma_channel *musb_channel = channel->private_data;
+	struct musb_dma_controller *controller = musb_channel->controller;
+	struct musb *musb = controller->private_data;
 
 	DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
 		musb_channel->epnum,
@@ -167,6 +169,18 @@ static int dma_channel_program(struct dma_channel *channel,
 	BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN ||
 		channel->status == MUSB_DMA_STATUS_BUSY);
 
+	/*
+	 * The DMA engine in RTL1.8 and above cannot handle
+	 * DMA addresses that are not aligned to a 4 byte boundary.
+	 * It ends up masking the last two bits of the address
+	 * programmed in DMA_ADDR.
+	 *
+	 * Fail such DMA transfers, so that the backup PIO mode
+	 * can carry out the transfer
+	 */
+	if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4))
+		return false;
+
 	channel->actual_len = 0;
 	musb_channel->start_addr = dma_addr;
 	musb_channel->len = len;
@@ -363,7 +377,7 @@ dma_controller_create(struct musb *musb, void __iomem *base)
 	struct musb_dma_controller *controller;
 	struct device *dev = musb->controller;
 	struct platform_device *pdev = to_platform_device(dev);
-	int irq = platform_get_irq(pdev, 1);
+	int irq = platform_get_irq_byname(pdev, "dma");
 
 	if (irq == 0) {
 		dev_err(dev, "No DMA interrupt line!\n");
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index ed618bde1ee..a3f12333fc4 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -31,10 +31,18 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include "musb_core.h"
 #include "omap2430.h"
 
+struct omap2430_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+};
+#define glue_to_musb(g)		platform_get_drvdata(g->musb)
 
 static struct timer_list musb_idle_timer;
 
@@ -49,12 +57,8 @@ static void musb_do_idle(unsigned long _musb)
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
-
 	switch (musb->xceiv->state) {
 	case OTG_STATE_A_WAIT_BCON:
-		devctl &= ~MUSB_DEVCTL_SESSION;
-		musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 		if (devctl & MUSB_DEVCTL_BDEVICE) {
@@ -98,7 +102,7 @@ static void musb_do_idle(unsigned long _musb)
 }
 
 
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
 	static unsigned long	last_timer;
@@ -131,15 +135,11 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 	mod_timer(&musb_idle_timer, timeout);
 }
 
-void musb_platform_enable(struct musb *musb)
-{
-}
-void musb_platform_disable(struct musb *musb)
-{
-}
-static void omap_set_vbus(struct musb *musb, int is_on)
+static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 {
 	u8		devctl;
+	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+	int ret = 1;
 	/* HDRC controls CPEN, but beware current surges during device
 	 * connect.  They can trigger transient overcurrent conditions
 	 * that must be ignored.
@@ -148,12 +148,35 @@ static void omap_set_vbus(struct musb *musb, int is_on)
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
 	if (is_on) {
-		musb->is_active = 1;
-		musb->xceiv->default_a = 1;
-		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
-		devctl |= MUSB_DEVCTL_SESSION;
-
-		MUSB_HST_MODE(musb);
+		if (musb->xceiv->state == OTG_STATE_A_IDLE) {
+			/* start the session */
+			devctl |= MUSB_DEVCTL_SESSION;
+			musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+			/*
+			 * Wait for the musb to set as A device to enable the
+			 * VBUS
+			 */
+			while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
+
+				cpu_relax();
+
+				if (time_after(jiffies, timeout)) {
+					dev_err(musb->controller,
+					"configured as A device timeout");
+					ret = -EINVAL;
+					break;
+				}
+			}
+
+			if (ret && musb->xceiv->set_vbus)
+				otg_set_vbus(musb->xceiv, 1);
+		} else {
+			musb->is_active = 1;
+			musb->xceiv->default_a = 1;
+			musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+			devctl |= MUSB_DEVCTL_SESSION;
+			MUSB_HST_MODE(musb);
+		}
 	} else {
 		musb->is_active = 0;
 
@@ -175,9 +198,7 @@ static void omap_set_vbus(struct musb *musb, int is_on)
 		musb_readb(musb->mregs, MUSB_DEVCTL));
 }
 
-static int musb_platform_resume(struct musb *musb);
-
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	u8	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
@@ -187,10 +208,94 @@ int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
 	return 0;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static inline void omap2430_low_level_exit(struct musb *musb)
 {
 	u32 l;
-	struct omap_musb_board_data *data = board_data;
+
+	/* in any role */
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l |= ENABLEFORCE;	/* enable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+
+	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
+	l |= ENABLEWAKEUP;	/* enable wakeup */
+	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+}
+
+static inline void omap2430_low_level_init(struct musb *musb)
+{
+	u32 l;
+
+	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
+	l &= ~ENABLEWAKEUP;	/* disable wakeup */
+	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+
+	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
+	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
+	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+}
+
+/* blocking notifier support */
+static int musb_otg_notifications(struct notifier_block *nb,
+		unsigned long event, void *unused)
+{
+	struct musb	*musb = container_of(nb, struct musb, nb);
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *pdata = dev->platform_data;
+	struct omap_musb_board_data *data = pdata->board_data;
+
+	switch (event) {
+	case USB_EVENT_ID:
+		DBG(4, "ID GND\n");
+
+		if (is_otg_enabled(musb)) {
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
+			if (musb->gadget_driver) {
+				otg_init(musb->xceiv);
+
+				if (data->interface_type ==
+						MUSB_INTERFACE_UTMI)
+					omap2430_musb_set_vbus(musb, 1);
+
+			}
+#endif
+		} else {
+			otg_init(musb->xceiv);
+			if (data->interface_type ==
+					MUSB_INTERFACE_UTMI)
+				omap2430_musb_set_vbus(musb, 1);
+		}
+		break;
+
+	case USB_EVENT_VBUS:
+		DBG(4, "VBUS Connect\n");
+
+		otg_init(musb->xceiv);
+		break;
+
+	case USB_EVENT_NONE:
+		DBG(4, "VBUS Disconnect\n");
+
+		if (data->interface_type == MUSB_INTERFACE_UTMI) {
+			if (musb->xceiv->set_vbus)
+				otg_set_vbus(musb->xceiv, 0);
+		}
+		otg_shutdown(musb->xceiv);
+		break;
+	default:
+		DBG(4, "ID float\n");
+		return NOTIFY_DONE;
+	}
+
+	return NOTIFY_OK;
+}
+
+static int omap2430_musb_init(struct musb *musb)
+{
+	u32 l, status = 0;
+	struct device *dev = musb->controller;
+	struct musb_hdrc_platform_data *plat = dev->platform_data;
+	struct omap_musb_board_data *data = plat->board_data;
 
 	/* We require some kind of external transceiver, hooked
 	 * up through ULPI.  TWL4030-family PMICs include one,
@@ -202,7 +307,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 		return -ENODEV;
 	}
 
-	musb_platform_resume(musb);
+	omap2430_low_level_init(musb);
 
 	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
 	l &= ~ENABLEWAKEUP;	/* disable wakeup */
@@ -239,87 +344,214 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 			musb_readl(musb->mregs, OTG_INTERFSEL),
 			musb_readl(musb->mregs, OTG_SIMENABLE));
 
-	if (is_host_enabled(musb))
-		musb->board_set_vbus = omap_set_vbus;
+	musb->nb.notifier_call = musb_otg_notifications;
+	status = otg_register_notifier(musb->xceiv, &musb->nb);
+
+	if (status)
+		DBG(1, "notification register failed\n");
+
+	/* check whether cable is already connected */
+	if (musb->xceiv->state ==OTG_STATE_B_IDLE)
+		musb_otg_notifications(&musb->nb, 1,
+					musb->xceiv->gadget);
 
 	setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 
 	return 0;
 }
 
-#ifdef CONFIG_PM
-void musb_platform_save_context(struct musb *musb,
-		struct musb_context_registers *musb_context)
+static int omap2430_musb_exit(struct musb *musb)
 {
-	musb_context->otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	musb_context->otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
-}
 
-void musb_platform_restore_context(struct musb *musb,
-		struct musb_context_registers *musb_context)
-{
-	musb_writel(musb->mregs, OTG_SYSCONFIG, musb_context->otg_sysconfig);
-	musb_writel(musb->mregs, OTG_FORCESTDBY, musb_context->otg_forcestandby);
+	omap2430_low_level_exit(musb);
+	otg_put_transceiver(musb->xceiv);
+
+	return 0;
 }
-#endif
 
-static int musb_platform_suspend(struct musb *musb)
+static const struct musb_platform_ops omap2430_ops = {
+	.init		= omap2430_musb_init,
+	.exit		= omap2430_musb_exit,
+
+	.set_mode	= omap2430_musb_set_mode,
+	.try_idle	= omap2430_musb_try_idle,
+
+	.set_vbus	= omap2430_musb_set_vbus,
+};
+
+static u64 omap2430_dmamask = DMA_BIT_MASK(32);
+
+static int __init omap2430_probe(struct platform_device *pdev)
 {
-	u32 l;
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct omap2430_glue		*glue;
+	struct clk			*clk;
 
-	if (!musb->clock)
-		return 0;
+	int				ret = -ENOMEM;
 
-	/* in any role */
-	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
-	l |= ENABLEFORCE;	/* enable MSTANDBY */
-	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
 
-	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	l |= ENABLEWAKEUP;	/* enable wakeup */
-	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
 
-	otg_set_suspend(musb->xceiv, 1);
+	clk = clk_get(&pdev->dev, "ick");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err2;
+	}
 
-	if (musb->set_clock)
-		musb->set_clock(musb->clock, 0);
-	else
-		clk_disable(musb->clock);
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err3;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &omap2430_dmamask;
+	musb->dev.coherent_dma_mask	= omap2430_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &omap2430_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err4;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err4;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err4;
+	}
 
 	return 0;
+
+err4:
+	clk_disable(clk);
+
+err3:
+	clk_put(clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
 }
 
-static int musb_platform_resume(struct musb *musb)
+static int __exit omap2430_remove(struct platform_device *pdev)
 {
-	u32 l;
+	struct omap2430_glue		*glue = platform_get_drvdata(pdev);
 
-	if (!musb->clock)
-		return 0;
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_put(glue->clk);
+	kfree(glue);
 
-	otg_set_suspend(musb->xceiv, 0);
+	return 0;
+}
 
-	if (musb->set_clock)
-		musb->set_clock(musb->clock, 1);
-	else
-		clk_enable(musb->clock);
+#ifdef CONFIG_PM
+static void omap2430_save_context(struct musb *musb)
+{
+	musb->context.otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG);
+	musb->context.otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY);
+}
 
-	l = musb_readl(musb->mregs, OTG_SYSCONFIG);
-	l &= ~ENABLEWAKEUP;	/* disable wakeup */
-	musb_writel(musb->mregs, OTG_SYSCONFIG, l);
+static void omap2430_restore_context(struct musb *musb)
+{
+	musb_writel(musb->mregs, OTG_SYSCONFIG, musb->context.otg_sysconfig);
+	musb_writel(musb->mregs, OTG_FORCESTDBY, musb->context.otg_forcestandby);
+}
 
-	l = musb_readl(musb->mregs, OTG_FORCESTDBY);
-	l &= ~ENABLEFORCE;	/* disable MSTANDBY */
-	musb_writel(musb->mregs, OTG_FORCESTDBY, l);
+static int omap2430_suspend(struct device *dev)
+{
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+
+	omap2430_low_level_exit(musb);
+	otg_set_suspend(musb->xceiv, 1);
+	omap2430_save_context(musb);
+	clk_disable(glue->clk);
 
 	return 0;
 }
 
-
-int musb_platform_exit(struct musb *musb)
+static int omap2430_resume(struct device *dev)
 {
+	struct omap2430_glue		*glue = dev_get_drvdata(dev);
+	struct musb			*musb = glue_to_musb(glue);
+	int				ret;
+
+	ret = clk_enable(glue->clk);
+	if (ret) {
+		dev_err(dev, "faled to enable clock\n");
+		return ret;
+	}
 
-	musb_platform_suspend(musb);
+	omap2430_low_level_init(musb);
+	omap2430_restore_context(musb);
+	otg_set_suspend(musb->xceiv, 0);
 
-	otg_put_transceiver(musb->xceiv);
 	return 0;
 }
+
+static struct dev_pm_ops omap2430_pm_ops = {
+	.suspend	= omap2430_suspend,
+	.resume		= omap2430_resume,
+};
+
+#define DEV_PM_OPS	(&omap2430_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver omap2430_driver = {
+	.remove		= __exit_p(omap2430_remove),
+	.driver		= {
+		.name	= "musb-omap2430",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init omap2430_init(void)
+{
+	return platform_driver_probe(&omap2430_driver, omap2430_probe);
+}
+subsys_initcall(omap2430_init);
+
+static void __exit omap2430_exit(void)
+{
+	platform_driver_unregister(&omap2430_driver);
+}
+module_exit(omap2430_exit);
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index bde40efc704..2ba3b070ed0 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -21,10 +21,16 @@
 #include <linux/usb.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include "musb_core.h"
 
-static void tusb_source_power(struct musb *musb, int is_on);
+struct tusb6010_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+};
+
+static void tusb_musb_set_vbus(struct musb *musb, int is_on);
 
 #define TUSB_REV_MAJOR(reg_val)		((reg_val >> 4) & 0xf)
 #define TUSB_REV_MINOR(reg_val)		(reg_val & 0xf)
@@ -50,7 +56,7 @@ u8 tusb_get_revision(struct musb *musb)
 	return rev;
 }
 
-static int __init tusb_print_revision(struct musb *musb)
+static int tusb_print_revision(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u8		rev;
@@ -275,17 +281,6 @@ static int tusb_draw_power(struct otg_transceiver *x, unsigned mA)
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		reg;
 
-	/*
-	 * Keep clock active when enabled. Note that this is not tied to
-	 * drawing VBUS, as with OTG mA can be less than musb->min_power.
-	 */
-	if (musb->set_clock) {
-		if (mA)
-			musb->set_clock(musb->clock, 1);
-		else
-			musb->set_clock(musb->clock, 0);
-	}
-
 	/* tps65030 seems to consume max 100mA, with maybe 60mA available
 	 * (measured on one board) for things other than tps and tusb.
 	 *
@@ -348,7 +343,7 @@ static void tusb_set_clock_source(struct musb *musb, unsigned mode)
  * USB link is not suspended ... and tells us the relevant wakeup
  * events.  SW_EN for voltage is handled separately.
  */
-void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
+static void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		reg;
@@ -385,7 +380,7 @@ void tusb_allow_idle(struct musb *musb, u32 wakeup_enables)
 /*
  * Updates cable VBUS status. Caller must take care of locking.
  */
-int musb_platform_get_vbus_status(struct musb *musb)
+static int tusb_musb_vbus_status(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		otg_stat, prcm_mngmt;
@@ -431,7 +426,7 @@ static void musb_do_idle(unsigned long _musb)
 		}
 		/* FALLTHROUGH */
 	case OTG_STATE_A_IDLE:
-		tusb_source_power(musb, 0);
+		tusb_musb_set_vbus(musb, 0);
 	default:
 		break;
 	}
@@ -475,7 +470,7 @@ done:
  * we don't want to treat that full speed J as a wakeup event.
  * ... peripherals must draw only suspend current after 10 msec.
  */
-void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
+static void tusb_musb_try_idle(struct musb *musb, unsigned long timeout)
 {
 	unsigned long		default_timeout = jiffies + msecs_to_jiffies(3);
 	static unsigned long	last_timer;
@@ -515,7 +510,7 @@ void musb_platform_try_idle(struct musb *musb, unsigned long timeout)
 				| TUSB_DEV_OTG_TIMER_ENABLE) \
 		: 0)
 
-static void tusb_source_power(struct musb *musb, int is_on)
+static void tusb_musb_set_vbus(struct musb *musb, int is_on)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		conf, prcm, timer;
@@ -531,8 +526,6 @@ static void tusb_source_power(struct musb *musb, int is_on)
 	devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 
 	if (is_on) {
-		if (musb->set_clock)
-			musb->set_clock(musb->clock, 1);
 		timer = OTG_TIMER_MS(OTG_TIME_A_WAIT_VRISE);
 		musb->xceiv->default_a = 1;
 		musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -571,8 +564,6 @@ static void tusb_source_power(struct musb *musb, int is_on)
 
 		devctl &= ~MUSB_DEVCTL_SESSION;
 		conf &= ~TUSB_DEV_CONF_USB_HOST_MODE;
-		if (musb->set_clock)
-			musb->set_clock(musb->clock, 0);
 	}
 	prcm &= ~(TUSB_PRCM_MNGMT_15_SW_EN | TUSB_PRCM_MNGMT_33_SW_EN);
 
@@ -599,7 +590,7 @@ static void tusb_source_power(struct musb *musb, int is_on)
  * and peripheral modes in non-OTG configurations by reconfiguring hardware
  * and then setting musb->board_mode. For now, only support OTG mode.
  */
-int musb_platform_set_mode(struct musb *musb, u8 musb_mode)
+static int tusb_musb_set_mode(struct musb *musb, u8 musb_mode)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	u32		otg_stat, phy_otg_ctrl, phy_otg_ena, dev_conf;
@@ -677,7 +668,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			default_a = is_host_enabled(musb);
 		DBG(2, "Default-%c\n", default_a ? 'A' : 'B');
 		musb->xceiv->default_a = default_a;
-		tusb_source_power(musb, default_a);
+		tusb_musb_set_vbus(musb, default_a);
 
 		/* Don't allow idling immediately */
 		if (default_a)
@@ -722,7 +713,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			switch (musb->xceiv->state) {
 			case OTG_STATE_A_IDLE:
 				DBG(2, "Got SRP, turning on VBUS\n");
-				musb_set_vbus(musb, 1);
+				musb_platform_set_vbus(musb, 1);
 
 				/* CONNECT can wake if a_wait_bcon is set */
 				if (musb->a_wait_bcon != 0)
@@ -748,11 +739,11 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 				 */
 				if (musb->vbuserr_retry) {
 					musb->vbuserr_retry--;
-					tusb_source_power(musb, 1);
+					tusb_musb_set_vbus(musb, 1);
 				} else {
 					musb->vbuserr_retry
 						= VBUSERR_RETRY_COUNT;
-					tusb_source_power(musb, 0);
+					tusb_musb_set_vbus(musb, 0);
 				}
 				break;
 			default:
@@ -786,7 +777,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 			} else {
 				/* REVISIT report overcurrent to hub? */
 				ERR("vbus too slow, devctl %02x\n", devctl);
-				tusb_source_power(musb, 0);
+				tusb_musb_set_vbus(musb, 0);
 			}
 			break;
 		case OTG_STATE_A_WAIT_BCON:
@@ -807,7 +798,7 @@ tusb_otg_ints(struct musb *musb, u32 int_src, void __iomem *tbase)
 	return idle_timeout;
 }
 
-static irqreturn_t tusb_interrupt(int irq, void *__hci)
+static irqreturn_t tusb_musb_interrupt(int irq, void *__hci)
 {
 	struct musb	*musb = __hci;
 	void __iomem	*tbase = musb->ctrl_base;
@@ -911,7 +902,7 @@ static irqreturn_t tusb_interrupt(int irq, void *__hci)
 	musb_writel(tbase, TUSB_INT_SRC_CLEAR,
 		int_src & ~TUSB_INT_MASK_RESERVED_BITS);
 
-	musb_platform_try_idle(musb, idle_timeout);
+	tusb_musb_try_idle(musb, idle_timeout);
 
 	musb_writel(tbase, TUSB_INT_MASK, int_mask);
 	spin_unlock_irqrestore(&musb->lock, flags);
@@ -926,7 +917,7 @@ static int dma_off;
  * REVISIT:
  * - Check what is unnecessary in MGC_HdrcStart()
  */
-void musb_platform_enable(struct musb *musb)
+static void tusb_musb_enable(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 
@@ -970,7 +961,7 @@ void musb_platform_enable(struct musb *musb)
 /*
  * Disables TUSB6010. Caller must take care of locking.
  */
-void musb_platform_disable(struct musb *musb)
+static void tusb_musb_disable(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 
@@ -995,7 +986,7 @@ void musb_platform_disable(struct musb *musb)
  * Sets up TUSB6010 CPU interface specific signals and registers
  * Note: Settings optimized for OMAP24xx
  */
-static void __init tusb_setup_cpu_interface(struct musb *musb)
+static void tusb_setup_cpu_interface(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 
@@ -1022,7 +1013,7 @@ static void __init tusb_setup_cpu_interface(struct musb *musb)
 	musb_writel(tbase, TUSB_WAIT_COUNT, 1);
 }
 
-static int __init tusb_start(struct musb *musb)
+static int tusb_musb_start(struct musb *musb)
 {
 	void __iomem	*tbase = musb->ctrl_base;
 	int		ret = 0;
@@ -1091,7 +1082,7 @@ err:
 	return -ENODEV;
 }
 
-int __init musb_platform_init(struct musb *musb, void *board_data)
+static int tusb_musb_init(struct musb *musb)
 {
 	struct platform_device	*pdev;
 	struct resource		*mem;
@@ -1131,16 +1122,14 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
 	 */
 	musb->mregs += TUSB_BASE_OFFSET;
 
-	ret = tusb_start(musb);
+	ret = tusb_musb_start(musb);
 	if (ret) {
 		printk(KERN_ERR "Could not start tusb6010 (%d)\n",
 				ret);
 		goto done;
 	}
-	musb->isr = tusb_interrupt;
+	musb->isr = tusb_musb_interrupt;
 
-	if (is_host_enabled(musb))
-		musb->board_set_vbus = tusb_source_power;
 	if (is_peripheral_enabled(musb)) {
 		musb->xceiv->set_power = tusb_draw_power;
 		the_musb = musb;
@@ -1159,7 +1148,7 @@ done:
 	return ret;
 }
 
-int musb_platform_exit(struct musb *musb)
+static int tusb_musb_exit(struct musb *musb)
 {
 	del_timer_sync(&musb_idle_timer);
 	the_musb = NULL;
@@ -1173,3 +1162,115 @@ int musb_platform_exit(struct musb *musb)
 	usb_nop_xceiv_unregister();
 	return 0;
 }
+
+static const struct musb_platform_ops tusb_ops = {
+	.init		= tusb_musb_init,
+	.exit		= tusb_musb_exit,
+
+	.enable		= tusb_musb_enable,
+	.disable	= tusb_musb_disable,
+
+	.set_mode	= tusb_musb_set_mode,
+	.try_idle	= tusb_musb_try_idle,
+
+	.vbus_status	= tusb_musb_vbus_status,
+	.set_vbus	= tusb_musb_set_vbus,
+};
+
+static u64 tusb_dmamask = DMA_BIT_MASK(32);
+
+static int __init tusb_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct tusb6010_glue		*glue;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &tusb_dmamask;
+	musb->dev.coherent_dma_mask	= tusb_dmamask;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+
+	pdata->platform_ops		= &tusb_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err2;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err2;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err1;
+	}
+
+	return 0;
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit tusb_remove(struct platform_device *pdev)
+{
+	struct tusb6010_glue		*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	kfree(glue);
+
+	return 0;
+}
+
+static struct platform_driver tusb_driver = {
+	.remove		= __exit_p(tusb_remove),
+	.driver		= {
+		.name	= "musb-tusb",
+	},
+};
+
+MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init tusb_init(void)
+{
+	return platform_driver_probe(&tusb_driver, tusb_probe);
+}
+subsys_initcall(tusb_init);
+
+static void __exit tusb_exit(void)
+{
+	platform_driver_unregister(&tusb_driver);
+}
+module_exit(tusb_exit);
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
new file mode 100644
index 00000000000..d6384e4aeef
--- /dev/null
+++ b/drivers/usb/musb/ux500.c
@@ -0,0 +1,216 @@
+/*
+ * Copyright (C) 2010 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ *
+ * Based on omap2430.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include "musb_core.h"
+
+struct ux500_glue {
+	struct device		*dev;
+	struct platform_device	*musb;
+	struct clk		*clk;
+};
+#define glue_to_musb(g)	platform_get_drvdata(g->musb)
+
+static int ux500_musb_init(struct musb *musb)
+{
+	musb->xceiv = otg_get_transceiver();
+	if (!musb->xceiv) {
+		pr_err("HS USB OTG: no transceiver configured\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int ux500_musb_exit(struct musb *musb)
+{
+	otg_put_transceiver(musb->xceiv);
+
+	return 0;
+}
+
+static const struct musb_platform_ops ux500_ops = {
+	.init		= ux500_musb_init,
+	.exit		= ux500_musb_exit,
+};
+
+static int __init ux500_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+	struct ux500_glue		*glue;
+	struct clk			*clk;
+
+	int				ret = -ENOMEM;
+
+	glue = kzalloc(sizeof(*glue), GFP_KERNEL);
+	if (!glue) {
+		dev_err(&pdev->dev, "failed to allocate glue context\n");
+		goto err0;
+	}
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err1;
+	}
+
+	clk = clk_get(&pdev->dev, "usb");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		ret = PTR_ERR(clk);
+		goto err2;
+	}
+
+	ret = clk_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable clock\n");
+		goto err3;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+
+	glue->dev			= &pdev->dev;
+	glue->musb			= musb;
+	glue->clk			= clk;
+
+	pdata->platform_ops		= &ux500_ops;
+
+	platform_set_drvdata(pdev, glue);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err4;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err4;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err4;
+	}
+
+	return 0;
+
+err4:
+	clk_disable(clk);
+
+err3:
+	clk_put(clk);
+
+err2:
+	platform_device_put(musb);
+
+err1:
+	kfree(glue);
+
+err0:
+	return ret;
+}
+
+static int __exit ux500_remove(struct platform_device *pdev)
+{
+	struct ux500_glue	*glue = platform_get_drvdata(pdev);
+
+	platform_device_del(glue->musb);
+	platform_device_put(glue->musb);
+	clk_disable(glue->clk);
+	clk_put(glue->clk);
+	kfree(glue);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ux500_suspend(struct device *dev)
+{
+	struct ux500_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+
+	otg_set_suspend(musb->xceiv, 1);
+	clk_disable(glue->clk);
+
+	return 0;
+}
+
+static int ux500_resume(struct device *dev)
+{
+	struct ux500_glue	*glue = dev_get_drvdata(dev);
+	struct musb		*musb = glue_to_musb(glue);
+	int			ret;
+
+	ret = clk_enable(glue->clk);
+	if (ret) {
+		dev_err(dev, "failed to enable clock\n");
+		return ret;
+	}
+
+	otg_set_suspend(musb->xceiv, 0);
+
+	return 0;
+}
+
+static const struct dev_pm_ops ux500_pm_ops = {
+	.suspend	= ux500_suspend,
+	.resume		= ux500_resume,
+};
+
+#define DEV_PM_OPS	(&ux500_pm_ops)
+#else
+#define DEV_PM_OPS	NULL
+#endif
+
+static struct platform_driver ux500_driver = {
+	.remove		= __exit_p(ux500_remove),
+	.driver		= {
+		.name	= "musb-ux500",
+		.pm	= DEV_PM_OPS,
+	},
+};
+
+MODULE_DESCRIPTION("UX500 MUSB Glue Layer");
+MODULE_AUTHOR("Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init ux500_init(void)
+{
+	return platform_driver_probe(&ux500_driver, ux500_probe);
+}
+subsys_initcall(ux500_init);
+
+static void __exit ux500_exit(void)
+{
+	platform_driver_unregister(&ux500_driver);
+}
+module_exit(ux500_exit);
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 5ce07528cd0..9fb875d5f09 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,6 +59,18 @@ config TWL4030_USB
 	  This transceiver supports high and full speed devices plus,
 	  in host mode, low speed.
 
+config TWL6030_USB
+	tristate "TWL6030 USB Transceiver Driver"
+	depends on TWL4030_CORE
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the USB OTG transceiver on TWL6030
+	  family chips. This TWL6030 transceiver has the VBUS and ID GND
+	  and OTG SRP events capabilities. For all other transceiver functionality
+	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs
+	  are hooked to this driver through platform_data structure.
+	  The definition of internal PHY APIs are in the mach-omap2 layer.
+
 config NOP_USB_XCEIV
 	tristate "NOP USB Transceiver Driver"
 	select USB_OTG_UTILS
@@ -81,4 +93,24 @@ config USB_LANGWELL_OTG
 	  To compile this driver as a module, choose M here: the
 	  module will be called langwell_otg.
 
+config USB_MSM_OTG_72K
+	tristate "OTG support for Qualcomm on-chip USB controller"
+	depends on (USB || USB_GADGET) && ARCH_MSM
+	select USB_OTG_UTILS
+	help
+	  Enable this to support the USB OTG transceiver on MSM chips. It
+	  handles PHY initialization, clock management, and workarounds
+	  required after resetting the hardware and power management.
+	  This driver is required even for peripheral only or host only
+	  mode configurations.
+
+config AB8500_USB
+        tristate "AB8500 USB Transceiver Driver"
+        depends on AB8500_CORE
+        select USB_OTG_UTILS
+        help
+          Enable this to support the USB OTG transceiver in AB8500 chip.
+          This transceiver supports high and full speed devices plus,
+          in host mode, low speed.
+
 endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 66f1b83e4fa..a520e715cfd 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -12,6 +12,9 @@ obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o
 obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o
 obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
+obj-$(CONFIG_TWL6030_USB)	+= twl6030-usb.o
 obj-$(CONFIG_USB_LANGWELL_OTG)	+= langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 obj-$(CONFIG_USB_ULPI)		+= ulpi.o
+obj-$(CONFIG_USB_MSM_OTG_72K)	+= msm72k_otg.o
+obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o
diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c
new file mode 100644
index 00000000000..d14736b3107
--- /dev/null
+++ b/drivers/usb/otg/ab8500-usb.c
@@ -0,0 +1,585 @@
+/*
+ * drivers/usb/otg/ab8500_usb.c
+ *
+ * USB transceiver driver for AB8500 chip
+ *
+ * Copyright (C) 2010 ST-Ericsson AB
+ * Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/slab.h>
+#include <linux/notifier.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/ab8500.h>
+
+#define AB8500_MAIN_WD_CTRL_REG 0x01
+#define AB8500_USB_LINE_STAT_REG 0x80
+#define AB8500_USB_PHY_CTRL_REG 0x8A
+
+#define AB8500_BIT_OTG_STAT_ID (1 << 0)
+#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0)
+#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1)
+#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0)
+#define AB8500_BIT_WD_CTRL_KICK (1 << 1)
+
+#define AB8500_V1x_LINK_STAT_WAIT (HZ/10)
+#define AB8500_WD_KICK_DELAY_US 100 /* usec */
+#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */
+#define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */
+
+/* Usb line status register */
+enum ab8500_usb_link_status {
+	USB_LINK_NOT_CONFIGURED = 0,
+	USB_LINK_STD_HOST_NC,
+	USB_LINK_STD_HOST_C_NS,
+	USB_LINK_STD_HOST_C_S,
+	USB_LINK_HOST_CHG_NM,
+	USB_LINK_HOST_CHG_HS,
+	USB_LINK_HOST_CHG_HS_CHIRP,
+	USB_LINK_DEDICATED_CHG,
+	USB_LINK_ACA_RID_A,
+	USB_LINK_ACA_RID_B,
+	USB_LINK_ACA_RID_C_NM,
+	USB_LINK_ACA_RID_C_HS,
+	USB_LINK_ACA_RID_C_HS_CHIRP,
+	USB_LINK_HM_IDGND,
+	USB_LINK_RESERVED,
+	USB_LINK_NOT_VALID_LINK
+};
+
+struct ab8500_usb {
+	struct otg_transceiver otg;
+	struct device *dev;
+	int irq_num_id_rise;
+	int irq_num_id_fall;
+	int irq_num_vbus_rise;
+	int irq_num_vbus_fall;
+	int irq_num_link_status;
+	unsigned vbus_draw;
+	struct delayed_work dwork;
+	struct work_struct phy_dis_work;
+	unsigned long link_status_wait;
+	int rev;
+};
+
+static inline struct ab8500_usb *xceiv_to_ab(struct otg_transceiver *x)
+{
+	return container_of(x, struct ab8500_usb, otg);
+}
+
+static void ab8500_usb_wd_workaround(struct ab8500_usb *ab)
+{
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		AB8500_BIT_WD_CTRL_ENABLE);
+
+	udelay(AB8500_WD_KICK_DELAY_US);
+
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		(AB8500_BIT_WD_CTRL_ENABLE
+		| AB8500_BIT_WD_CTRL_KICK));
+
+	if (ab->rev > 0x10) /* v1.1 v2.0 */
+		udelay(AB8500_WD_V11_DISABLE_DELAY_US);
+	else /* v1.0 */
+		msleep(AB8500_WD_V10_DISABLE_DELAY_MS);
+
+	abx500_set_register_interruptible(ab->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WD_CTRL_REG,
+		0);
+}
+
+static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host,
+					bool enable)
+{
+	u8 ctrl_reg;
+	abx500_get_register_interruptible(ab->dev,
+				AB8500_USB,
+				AB8500_USB_PHY_CTRL_REG,
+				&ctrl_reg);
+	if (sel_host) {
+		if (enable)
+			ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN;
+		else
+			ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN;
+	} else {
+		if (enable)
+			ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN;
+		else
+			ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN;
+	}
+
+	abx500_set_register_interruptible(ab->dev,
+				AB8500_USB,
+				AB8500_USB_PHY_CTRL_REG,
+				ctrl_reg);
+
+	/* Needed to enable the phy.*/
+	if (enable)
+		ab8500_usb_wd_workaround(ab);
+}
+
+#define ab8500_usb_host_phy_en(ab)	ab8500_usb_phy_ctrl(ab, true, true)
+#define ab8500_usb_host_phy_dis(ab)	ab8500_usb_phy_ctrl(ab, true, false)
+#define ab8500_usb_peri_phy_en(ab)	ab8500_usb_phy_ctrl(ab, false, true)
+#define ab8500_usb_peri_phy_dis(ab)	ab8500_usb_phy_ctrl(ab, false, false)
+
+static int ab8500_usb_link_status_update(struct ab8500_usb *ab)
+{
+	u8 reg;
+	enum ab8500_usb_link_status lsts;
+	void *v = NULL;
+	enum usb_xceiv_events event;
+
+	abx500_get_register_interruptible(ab->dev,
+			AB8500_USB,
+			AB8500_USB_LINE_STAT_REG,
+			&reg);
+
+	lsts = (reg >> 3) & 0x0F;
+
+	switch (lsts) {
+	case USB_LINK_NOT_CONFIGURED:
+	case USB_LINK_RESERVED:
+	case USB_LINK_NOT_VALID_LINK:
+		/* TODO: Disable regulators. */
+		ab8500_usb_host_phy_dis(ab);
+		ab8500_usb_peri_phy_dis(ab);
+		ab->otg.state = OTG_STATE_B_IDLE;
+		ab->otg.default_a = false;
+		ab->vbus_draw = 0;
+		event = USB_EVENT_NONE;
+		break;
+
+	case USB_LINK_STD_HOST_NC:
+	case USB_LINK_STD_HOST_C_NS:
+	case USB_LINK_STD_HOST_C_S:
+	case USB_LINK_HOST_CHG_NM:
+	case USB_LINK_HOST_CHG_HS:
+	case USB_LINK_HOST_CHG_HS_CHIRP:
+		if (ab->otg.gadget) {
+			/* TODO: Enable regulators. */
+			ab8500_usb_peri_phy_en(ab);
+			v = ab->otg.gadget;
+		}
+		event = USB_EVENT_VBUS;
+		break;
+
+	case USB_LINK_HM_IDGND:
+		if (ab->otg.host) {
+			/* TODO: Enable regulators. */
+			ab8500_usb_host_phy_en(ab);
+			v = ab->otg.host;
+		}
+		ab->otg.state = OTG_STATE_A_IDLE;
+		ab->otg.default_a = true;
+		event = USB_EVENT_ID;
+		break;
+
+	case USB_LINK_ACA_RID_A:
+	case USB_LINK_ACA_RID_B:
+		/* TODO */
+	case USB_LINK_ACA_RID_C_NM:
+	case USB_LINK_ACA_RID_C_HS:
+	case USB_LINK_ACA_RID_C_HS_CHIRP:
+	case USB_LINK_DEDICATED_CHG:
+		/* TODO: vbus_draw */
+		event = USB_EVENT_CHARGER;
+		break;
+	}
+
+	blocking_notifier_call_chain(&ab->otg.notifier, event, v);
+
+	return 0;
+}
+
+static void ab8500_usb_delayed_work(struct work_struct *work)
+{
+	struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+						dwork.work);
+
+	ab8500_usb_link_status_update(ab);
+}
+
+static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+
+	/* Wait for link status to become stable. */
+	schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+
+	/* Link status will not be updated till phy is disabled. */
+	ab8500_usb_peri_phy_dis(ab);
+
+	/* Wait for link status to become stable. */
+	schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ab8500_usb_v20_irq(int irq, void *data)
+{
+	struct ab8500_usb *ab = (struct ab8500_usb *) data;
+
+	ab8500_usb_link_status_update(ab);
+
+	return IRQ_HANDLED;
+}
+
+static void ab8500_usb_phy_disable_work(struct work_struct *work)
+{
+	struct ab8500_usb *ab = container_of(work, struct ab8500_usb,
+						phy_dis_work);
+
+	if (!ab->otg.host)
+		ab8500_usb_host_phy_dis(ab);
+
+	if (!ab->otg.gadget)
+		ab8500_usb_peri_phy_dis(ab);
+}
+
+static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = xceiv_to_ab(otg);
+
+	ab->vbus_draw = mA;
+
+	if (mA)
+		blocking_notifier_call_chain(&ab->otg.notifier,
+				USB_EVENT_ENUMERATED, ab->otg.gadget);
+	return 0;
+}
+
+/* TODO: Implement some way for charging or other drivers to read
+ * ab->vbus_draw.
+ */
+
+static int ab8500_usb_set_suspend(struct otg_transceiver *x, int suspend)
+{
+	/* TODO */
+	return 0;
+}
+
+static int ab8500_usb_set_peripheral(struct otg_transceiver *otg,
+		struct usb_gadget *gadget)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = xceiv_to_ab(otg);
+
+	/* Some drivers call this function in atomic context.
+	 * Do not update ab8500 registers directly till this
+	 * is fixed.
+	 */
+
+	if (!gadget) {
+		/* TODO: Disable regulators. */
+		ab->otg.gadget = NULL;
+		schedule_work(&ab->phy_dis_work);
+	} else {
+		ab->otg.gadget = gadget;
+		ab->otg.state = OTG_STATE_B_IDLE;
+
+		/* Phy will not be enabled if cable is already
+		 * plugged-in. Schedule to enable phy.
+		 * Use same delay to avoid any race condition.
+		 */
+		schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+	}
+
+	return 0;
+}
+
+static int ab8500_usb_set_host(struct otg_transceiver *otg,
+					struct usb_bus *host)
+{
+	struct ab8500_usb *ab;
+
+	if (!otg)
+		return -ENODEV;
+
+	ab = xceiv_to_ab(otg);
+
+	/* Some drivers call this function in atomic context.
+	 * Do not update ab8500 registers directly till this
+	 * is fixed.
+	 */
+
+	if (!host) {
+		/* TODO: Disable regulators. */
+		ab->otg.host = NULL;
+		schedule_work(&ab->phy_dis_work);
+	} else {
+		ab->otg.host = host;
+		/* Phy will not be enabled if cable is already
+		 * plugged-in. Schedule to enable phy.
+		 * Use same delay to avoid any race condition.
+		 */
+		schedule_delayed_work(&ab->dwork, ab->link_status_wait);
+	}
+
+	return 0;
+}
+
+static void ab8500_usb_irq_free(struct ab8500_usb *ab)
+{
+	if (ab->rev < 0x20) {
+		free_irq(ab->irq_num_id_rise, ab);
+		free_irq(ab->irq_num_id_fall, ab);
+		free_irq(ab->irq_num_vbus_rise, ab);
+		free_irq(ab->irq_num_vbus_fall, ab);
+	} else {
+		free_irq(ab->irq_num_link_status, ab);
+	}
+}
+
+static int ab8500_usb_v1x_res_setup(struct platform_device *pdev,
+				struct ab8500_usb *ab)
+{
+	int err;
+
+	ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R");
+	if (ab->irq_num_id_rise < 0) {
+		dev_err(&pdev->dev, "ID rise irq not found\n");
+		return ab->irq_num_id_rise;
+	}
+	err = request_threaded_irq(ab->irq_num_id_rise, NULL,
+		ab8500_usb_v1x_common_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-id-rise", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for ID rise irq\n");
+		goto fail0;
+	}
+
+	ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F");
+	if (ab->irq_num_id_fall < 0) {
+		dev_err(&pdev->dev, "ID fall irq not found\n");
+		return ab->irq_num_id_fall;
+	}
+	err = request_threaded_irq(ab->irq_num_id_fall, NULL,
+		ab8500_usb_v1x_common_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-id-fall", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for ID fall irq\n");
+		goto fail1;
+	}
+
+	ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R");
+	if (ab->irq_num_vbus_rise < 0) {
+		dev_err(&pdev->dev, "VBUS rise irq not found\n");
+		return ab->irq_num_vbus_rise;
+	}
+	err = request_threaded_irq(ab->irq_num_vbus_rise, NULL,
+		ab8500_usb_v1x_common_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-vbus-rise", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for Vbus rise irq\n");
+		goto fail2;
+	}
+
+	ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F");
+	if (ab->irq_num_vbus_fall < 0) {
+		dev_err(&pdev->dev, "VBUS fall irq not found\n");
+		return ab->irq_num_vbus_fall;
+	}
+	err = request_threaded_irq(ab->irq_num_vbus_fall, NULL,
+		ab8500_usb_v1x_vbus_fall_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-vbus-fall", ab);
+	if (err < 0) {
+		dev_err(ab->dev, "request_irq failed for Vbus fall irq\n");
+		goto fail3;
+	}
+
+	return 0;
+fail3:
+	free_irq(ab->irq_num_vbus_rise, ab);
+fail2:
+	free_irq(ab->irq_num_id_fall, ab);
+fail1:
+	free_irq(ab->irq_num_id_rise, ab);
+fail0:
+	return err;
+}
+
+static int ab8500_usb_v2_res_setup(struct platform_device *pdev,
+				struct ab8500_usb *ab)
+{
+	int err;
+
+	ab->irq_num_link_status = platform_get_irq_byname(pdev,
+						"USB_LINK_STATUS");
+	if (ab->irq_num_link_status < 0) {
+		dev_err(&pdev->dev, "Link status irq not found\n");
+		return ab->irq_num_link_status;
+	}
+
+	err = request_threaded_irq(ab->irq_num_link_status, NULL,
+		ab8500_usb_v20_irq,
+		IRQF_NO_SUSPEND | IRQF_SHARED,
+		"usb-link-status", ab);
+	if (err < 0) {
+		dev_err(ab->dev,
+			"request_irq failed for link status irq\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int __devinit ab8500_usb_probe(struct platform_device *pdev)
+{
+	struct ab8500_usb	*ab;
+	int err;
+	int rev;
+
+	rev = abx500_get_chip_id(&pdev->dev);
+	if (rev < 0) {
+		dev_err(&pdev->dev, "Chip id read failed\n");
+		return rev;
+	} else if (rev < 0x10) {
+		dev_err(&pdev->dev, "Unsupported AB8500 chip\n");
+		return -ENODEV;
+	}
+
+	ab = kzalloc(sizeof *ab, GFP_KERNEL);
+	if (!ab)
+		return -ENOMEM;
+
+	ab->dev			= &pdev->dev;
+	ab->rev			= rev;
+	ab->otg.dev		= ab->dev;
+	ab->otg.label		= "ab8500";
+	ab->otg.state		= OTG_STATE_UNDEFINED;
+	ab->otg.set_host	= ab8500_usb_set_host;
+	ab->otg.set_peripheral	= ab8500_usb_set_peripheral;
+	ab->otg.set_suspend	= ab8500_usb_set_suspend;
+	ab->otg.set_power	= ab8500_usb_set_power;
+
+	platform_set_drvdata(pdev, ab);
+
+	BLOCKING_INIT_NOTIFIER_HEAD(&ab->otg.notifier);
+
+	/* v1: Wait for link status to become stable.
+	 * all: Updates form set_host and set_peripheral as they are atomic.
+	 */
+	INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work);
+
+	/* all: Disable phy when called from set_host and set_peripheral */
+	INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work);
+
+	if (ab->rev < 0x20) {
+		err = ab8500_usb_v1x_res_setup(pdev, ab);
+		ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT;
+	} else {
+		err = ab8500_usb_v2_res_setup(pdev, ab);
+	}
+
+	if (err < 0)
+		goto fail0;
+
+	err = otg_set_transceiver(&ab->otg);
+	if (err) {
+		dev_err(&pdev->dev, "Can't register transceiver\n");
+		goto fail1;
+	}
+
+	dev_info(&pdev->dev, "AB8500 usb driver initialized\n");
+
+	return 0;
+fail1:
+	ab8500_usb_irq_free(ab);
+fail0:
+	kfree(ab);
+	return err;
+}
+
+static int __devexit ab8500_usb_remove(struct platform_device *pdev)
+{
+	struct ab8500_usb *ab = platform_get_drvdata(pdev);
+
+	ab8500_usb_irq_free(ab);
+
+	cancel_delayed_work_sync(&ab->dwork);
+
+	cancel_work_sync(&ab->phy_dis_work);
+
+	otg_set_transceiver(NULL);
+
+	ab8500_usb_host_phy_dis(ab);
+	ab8500_usb_peri_phy_dis(ab);
+
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(ab);
+
+	return 0;
+}
+
+static struct platform_driver ab8500_usb_driver = {
+	.probe		= ab8500_usb_probe,
+	.remove		= __devexit_p(ab8500_usb_remove),
+	.driver		= {
+		.name	= "ab8500-usb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ab8500_usb_init(void)
+{
+	return platform_driver_register(&ab8500_usb_driver);
+}
+subsys_initcall(ab8500_usb_init);
+
+static void __exit ab8500_usb_exit(void)
+{
+	platform_driver_unregister(&ab8500_usb_driver);
+}
+module_exit(ab8500_usb_exit);
+
+MODULE_ALIAS("platform:ab8500_usb");
+MODULE_AUTHOR("ST-Ericsson AB");
+MODULE_DESCRIPTION("AB8500 usb transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 45696949241..e00fa1b22ec 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1247,7 +1247,7 @@ static int __exit isp1301_remove(struct i2c_client *i2c)
 	isp->timer.data = 0;
 	set_bit(WORK_STOP, &isp->todo);
 	del_timer_sync(&isp->timer);
-	flush_scheduled_work();
+	flush_work_sync(&isp->work);
 
 	put_device(&i2c->dev);
 	the_transceiver = NULL;
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index bdc3ea66be6..9fea48264fa 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -1896,7 +1896,7 @@ set_a_bus_req(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
+static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req);
 
 static ssize_t
 get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1942,8 +1942,7 @@ set_a_bus_drop(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
-	get_a_bus_drop, set_a_bus_drop);
+static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop);
 
 static ssize_t
 get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
@@ -1988,7 +1987,7 @@ set_b_bus_req(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
+static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req);
 
 static ssize_t
 set_a_clr_err(struct device *dev, struct device_attribute *attr,
@@ -2012,7 +2011,7 @@ set_a_clr_err(struct device *dev, struct device_attribute *attr,
 	}
 	return count;
 }
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
+static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err);
 
 static struct attribute *inputs_attrs[] = {
 	&dev_attr_a_bus_req.attr,
diff --git a/drivers/usb/otg/msm72k_otg.c b/drivers/usb/otg/msm72k_otg.c
new file mode 100644
index 00000000000..1cd52edcd0c
--- /dev/null
+++ b/drivers/usb/otg/msm72k_otg.c
@@ -0,0 +1,1125 @@
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/uaccess.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/usb.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/msm_hsusb.h>
+#include <linux/usb/msm_hsusb_hw.h>
+
+#include <mach/clk.h>
+
+#define MSM_USB_BASE	(motg->regs)
+#define DRIVER_NAME	"msm_otg"
+
+#define ULPI_IO_TIMEOUT_USEC	(10 * 1000)
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	int cnt = 0;
+
+	/* initiate read operation */
+	writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg),
+	       USB_ULPI_VIEWPORT);
+
+	/* wait for completion */
+	while (cnt < ULPI_IO_TIMEOUT_USEC) {
+		if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+		dev_err(otg->dev, "ulpi_read: timeout %08x\n",
+			readl(USB_ULPI_VIEWPORT));
+		return -ETIMEDOUT;
+	}
+	return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT));
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	int cnt = 0;
+
+	/* initiate write operation */
+	writel(ULPI_RUN | ULPI_WRITE |
+	       ULPI_ADDR(reg) | ULPI_DATA(val),
+	       USB_ULPI_VIEWPORT);
+
+	/* wait for completion */
+	while (cnt < ULPI_IO_TIMEOUT_USEC) {
+		if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN))
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= ULPI_IO_TIMEOUT_USEC) {
+		dev_err(otg->dev, "ulpi_write: timeout\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static struct otg_io_access_ops msm_otg_io_ops = {
+	.read = ulpi_read,
+	.write = ulpi_write,
+};
+
+static void ulpi_init(struct msm_otg *motg)
+{
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	int *seq = pdata->phy_init_seq;
+
+	if (!seq)
+		return;
+
+	while (seq[0] >= 0) {
+		dev_vdbg(motg->otg.dev, "ulpi: write 0x%02x to 0x%02x\n",
+				seq[0], seq[1]);
+		ulpi_write(&motg->otg, seq[0], seq[1]);
+		seq += 2;
+	}
+}
+
+static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert)
+{
+	int ret;
+
+	if (assert) {
+		ret = clk_reset(motg->clk, CLK_RESET_ASSERT);
+		if (ret)
+			dev_err(motg->otg.dev, "usb hs_clk assert failed\n");
+	} else {
+		ret = clk_reset(motg->clk, CLK_RESET_DEASSERT);
+		if (ret)
+			dev_err(motg->otg.dev, "usb hs_clk deassert failed\n");
+	}
+	return ret;
+}
+
+static int msm_otg_phy_clk_reset(struct msm_otg *motg)
+{
+	int ret;
+
+	ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT);
+	if (ret) {
+		dev_err(motg->otg.dev, "usb phy clk assert failed\n");
+		return ret;
+	}
+	usleep_range(10000, 12000);
+	ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT);
+	if (ret)
+		dev_err(motg->otg.dev, "usb phy clk deassert failed\n");
+	return ret;
+}
+
+static int msm_otg_phy_reset(struct msm_otg *motg)
+{
+	u32 val;
+	int ret;
+	int retries;
+
+	ret = msm_otg_link_clk_reset(motg, 1);
+	if (ret)
+		return ret;
+	ret = msm_otg_phy_clk_reset(motg);
+	if (ret)
+		return ret;
+	ret = msm_otg_link_clk_reset(motg, 0);
+	if (ret)
+		return ret;
+
+	val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK;
+	writel(val | PORTSC_PTS_ULPI, USB_PORTSC);
+
+	for (retries = 3; retries > 0; retries--) {
+		ret = ulpi_write(&motg->otg, ULPI_FUNC_CTRL_SUSPENDM,
+				ULPI_CLR(ULPI_FUNC_CTRL));
+		if (!ret)
+			break;
+		ret = msm_otg_phy_clk_reset(motg);
+		if (ret)
+			return ret;
+	}
+	if (!retries)
+		return -ETIMEDOUT;
+
+	/* This reset calibrates the phy, if the above write succeeded */
+	ret = msm_otg_phy_clk_reset(motg);
+	if (ret)
+		return ret;
+
+	for (retries = 3; retries > 0; retries--) {
+		ret = ulpi_read(&motg->otg, ULPI_DEBUG);
+		if (ret != -ETIMEDOUT)
+			break;
+		ret = msm_otg_phy_clk_reset(motg);
+		if (ret)
+			return ret;
+	}
+	if (!retries)
+		return -ETIMEDOUT;
+
+	dev_info(motg->otg.dev, "phy_reset: success\n");
+	return 0;
+}
+
+#define LINK_RESET_TIMEOUT_USEC		(250 * 1000)
+static int msm_otg_reset(struct otg_transceiver *otg)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	int cnt = 0;
+	int ret;
+	u32 val = 0;
+	u32 ulpi_val = 0;
+
+	ret = msm_otg_phy_reset(motg);
+	if (ret) {
+		dev_err(otg->dev, "phy_reset failed\n");
+		return ret;
+	}
+
+	ulpi_init(motg);
+
+	writel(USBCMD_RESET, USB_USBCMD);
+	while (cnt < LINK_RESET_TIMEOUT_USEC) {
+		if (!(readl(USB_USBCMD) & USBCMD_RESET))
+			break;
+		udelay(1);
+		cnt++;
+	}
+	if (cnt >= LINK_RESET_TIMEOUT_USEC)
+		return -ETIMEDOUT;
+
+	/* select ULPI phy */
+	writel(0x80000000, USB_PORTSC);
+
+	msleep(100);
+
+	writel(0x0, USB_AHBBURST);
+	writel(0x00, USB_AHBMODE);
+
+	if (pdata->otg_control == OTG_PHY_CONTROL) {
+		val = readl(USB_OTGSC);
+		if (pdata->mode == USB_OTG) {
+			ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID;
+			val |= OTGSC_IDIE | OTGSC_BSVIE;
+		} else if (pdata->mode == USB_PERIPHERAL) {
+			ulpi_val = ULPI_INT_SESS_VALID;
+			val |= OTGSC_BSVIE;
+		}
+		writel(val, USB_OTGSC);
+		ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_RISE);
+		ulpi_write(otg, ulpi_val, ULPI_USB_INT_EN_FALL);
+	}
+
+	return 0;
+}
+
+#define PHY_SUSPEND_TIMEOUT_USEC	(500 * 1000)
+static int msm_otg_suspend(struct msm_otg *motg)
+{
+	struct otg_transceiver *otg = &motg->otg;
+	struct usb_bus *bus = otg->host;
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	int cnt = 0;
+
+	if (atomic_read(&motg->in_lpm))
+		return 0;
+
+	disable_irq(motg->irq);
+	/*
+	 * Interrupt Latch Register auto-clear feature is not present
+	 * in all PHY versions. Latch register is clear on read type.
+	 * Clear latch register to avoid spurious wakeup from
+	 * low power mode (LPM).
+	 */
+	ulpi_read(otg, 0x14);
+
+	/*
+	 * PHY comparators are disabled when PHY enters into low power
+	 * mode (LPM). Keep PHY comparators ON in LPM only when we expect
+	 * VBUS/Id notifications from USB PHY. Otherwise turn off USB
+	 * PHY comparators. This save significant amount of power.
+	 */
+	if (pdata->otg_control == OTG_PHY_CONTROL)
+		ulpi_write(otg, 0x01, 0x30);
+
+	/*
+	 * PLL is not turned off when PHY enters into low power mode (LPM).
+	 * Disable PLL for maximum power savings.
+	 */
+	ulpi_write(otg, 0x08, 0x09);
+
+	/*
+	 * PHY may take some time or even fail to enter into low power
+	 * mode (LPM). Hence poll for 500 msec and reset the PHY and link
+	 * in failure case.
+	 */
+	writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
+	while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
+		if (readl(USB_PORTSC) & PORTSC_PHCD)
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) {
+		dev_err(otg->dev, "Unable to suspend PHY\n");
+		msm_otg_reset(otg);
+		enable_irq(motg->irq);
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * PHY has capability to generate interrupt asynchronously in low
+	 * power mode (LPM). This interrupt is level triggered. So USB IRQ
+	 * line must be disabled till async interrupt enable bit is cleared
+	 * in USBCMD register. Assert STP (ULPI interface STOP signal) to
+	 * block data communication from PHY.
+	 */
+	writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD);
+
+	clk_disable(motg->pclk);
+	clk_disable(motg->clk);
+	if (motg->core_clk)
+		clk_disable(motg->core_clk);
+
+	if (device_may_wakeup(otg->dev))
+		enable_irq_wake(motg->irq);
+	if (bus)
+		clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
+
+	atomic_set(&motg->in_lpm, 1);
+	enable_irq(motg->irq);
+
+	dev_info(otg->dev, "USB in low power mode\n");
+
+	return 0;
+}
+
+#define PHY_RESUME_TIMEOUT_USEC	(100 * 1000)
+static int msm_otg_resume(struct msm_otg *motg)
+{
+	struct otg_transceiver *otg = &motg->otg;
+	struct usb_bus *bus = otg->host;
+	int cnt = 0;
+	unsigned temp;
+
+	if (!atomic_read(&motg->in_lpm))
+		return 0;
+
+	clk_enable(motg->pclk);
+	clk_enable(motg->clk);
+	if (motg->core_clk)
+		clk_enable(motg->core_clk);
+
+	temp = readl(USB_USBCMD);
+	temp &= ~ASYNC_INTR_CTRL;
+	temp &= ~ULPI_STP_CTRL;
+	writel(temp, USB_USBCMD);
+
+	/*
+	 * PHY comes out of low power mode (LPM) in case of wakeup
+	 * from asynchronous interrupt.
+	 */
+	if (!(readl(USB_PORTSC) & PORTSC_PHCD))
+		goto skip_phy_resume;
+
+	writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC);
+	while (cnt < PHY_RESUME_TIMEOUT_USEC) {
+		if (!(readl(USB_PORTSC) & PORTSC_PHCD))
+			break;
+		udelay(1);
+		cnt++;
+	}
+
+	if (cnt >= PHY_RESUME_TIMEOUT_USEC) {
+		/*
+		 * This is a fatal error. Reset the link and
+		 * PHY. USB state can not be restored. Re-insertion
+		 * of USB cable is the only way to get USB working.
+		 */
+		dev_err(otg->dev, "Unable to resume USB."
+				"Re-plugin the cable\n");
+		msm_otg_reset(otg);
+	}
+
+skip_phy_resume:
+	if (device_may_wakeup(otg->dev))
+		disable_irq_wake(motg->irq);
+	if (bus)
+		set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags);
+
+	if (motg->async_int) {
+		motg->async_int = 0;
+		pm_runtime_put(otg->dev);
+		enable_irq(motg->irq);
+	}
+
+	atomic_set(&motg->in_lpm, 0);
+
+	dev_info(otg->dev, "USB exited from low power mode\n");
+
+	return 0;
+}
+
+static void msm_otg_start_host(struct otg_transceiver *otg, int on)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	struct usb_hcd *hcd;
+
+	if (!otg->host)
+		return;
+
+	hcd = bus_to_hcd(otg->host);
+
+	if (on) {
+		dev_dbg(otg->dev, "host on\n");
+
+		if (pdata->vbus_power)
+			pdata->vbus_power(1);
+		/*
+		 * Some boards have a switch cotrolled by gpio
+		 * to enable/disable internal HUB. Enable internal
+		 * HUB before kicking the host.
+		 */
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_A_HOST);
+#ifdef CONFIG_USB
+		usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
+#endif
+	} else {
+		dev_dbg(otg->dev, "host off\n");
+
+#ifdef CONFIG_USB
+		usb_remove_hcd(hcd);
+#endif
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_UNDEFINED);
+		if (pdata->vbus_power)
+			pdata->vbus_power(0);
+	}
+}
+
+static int msm_otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct usb_hcd *hcd;
+
+	/*
+	 * Fail host registration if this board can support
+	 * only peripheral configuration.
+	 */
+	if (motg->pdata->mode == USB_PERIPHERAL) {
+		dev_info(otg->dev, "Host mode is not supported\n");
+		return -ENODEV;
+	}
+
+	if (!host) {
+		if (otg->state == OTG_STATE_A_HOST) {
+			pm_runtime_get_sync(otg->dev);
+			msm_otg_start_host(otg, 0);
+			otg->host = NULL;
+			otg->state = OTG_STATE_UNDEFINED;
+			schedule_work(&motg->sm_work);
+		} else {
+			otg->host = NULL;
+		}
+
+		return 0;
+	}
+
+	hcd = bus_to_hcd(host);
+	hcd->power_budget = motg->pdata->power_budget;
+
+	otg->host = host;
+	dev_dbg(otg->dev, "host driver registered w/ tranceiver\n");
+
+	/*
+	 * Kick the state machine work, if peripheral is not supported
+	 * or peripheral is already registered with us.
+	 */
+	if (motg->pdata->mode == USB_HOST || otg->gadget) {
+		pm_runtime_get_sync(otg->dev);
+		schedule_work(&motg->sm_work);
+	}
+
+	return 0;
+}
+
+static void msm_otg_start_peripheral(struct otg_transceiver *otg, int on)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+	struct msm_otg_platform_data *pdata = motg->pdata;
+
+	if (!otg->gadget)
+		return;
+
+	if (on) {
+		dev_dbg(otg->dev, "gadget on\n");
+		/*
+		 * Some boards have a switch cotrolled by gpio
+		 * to enable/disable internal HUB. Disable internal
+		 * HUB before kicking the gadget.
+		 */
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_B_PERIPHERAL);
+		usb_gadget_vbus_connect(otg->gadget);
+	} else {
+		dev_dbg(otg->dev, "gadget off\n");
+		usb_gadget_vbus_disconnect(otg->gadget);
+		if (pdata->setup_gpio)
+			pdata->setup_gpio(OTG_STATE_UNDEFINED);
+	}
+
+}
+
+static int msm_otg_set_peripheral(struct otg_transceiver *otg,
+			struct usb_gadget *gadget)
+{
+	struct msm_otg *motg = container_of(otg, struct msm_otg, otg);
+
+	/*
+	 * Fail peripheral registration if this board can support
+	 * only host configuration.
+	 */
+	if (motg->pdata->mode == USB_HOST) {
+		dev_info(otg->dev, "Peripheral mode is not supported\n");
+		return -ENODEV;
+	}
+
+	if (!gadget) {
+		if (otg->state == OTG_STATE_B_PERIPHERAL) {
+			pm_runtime_get_sync(otg->dev);
+			msm_otg_start_peripheral(otg, 0);
+			otg->gadget = NULL;
+			otg->state = OTG_STATE_UNDEFINED;
+			schedule_work(&motg->sm_work);
+		} else {
+			otg->gadget = NULL;
+		}
+
+		return 0;
+	}
+	otg->gadget = gadget;
+	dev_dbg(otg->dev, "peripheral driver registered w/ tranceiver\n");
+
+	/*
+	 * Kick the state machine work, if host is not supported
+	 * or host is already registered with us.
+	 */
+	if (motg->pdata->mode == USB_PERIPHERAL || otg->host) {
+		pm_runtime_get_sync(otg->dev);
+		schedule_work(&motg->sm_work);
+	}
+
+	return 0;
+}
+
+/*
+ * We support OTG, Peripheral only and Host only configurations. In case
+ * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen
+ * via Id pin status or user request (debugfs). Id/BSV interrupts are not
+ * enabled when switch is controlled by user and default mode is supplied
+ * by board file, which can be changed by userspace later.
+ */
+static void msm_otg_init_sm(struct msm_otg *motg)
+{
+	struct msm_otg_platform_data *pdata = motg->pdata;
+	u32 otgsc = readl(USB_OTGSC);
+
+	switch (pdata->mode) {
+	case USB_OTG:
+		if (pdata->otg_control == OTG_PHY_CONTROL) {
+			if (otgsc & OTGSC_ID)
+				set_bit(ID, &motg->inputs);
+			else
+				clear_bit(ID, &motg->inputs);
+
+			if (otgsc & OTGSC_BSV)
+				set_bit(B_SESS_VLD, &motg->inputs);
+			else
+				clear_bit(B_SESS_VLD, &motg->inputs);
+		} else if (pdata->otg_control == OTG_USER_CONTROL) {
+			if (pdata->default_mode == USB_HOST) {
+				clear_bit(ID, &motg->inputs);
+			} else if (pdata->default_mode == USB_PERIPHERAL) {
+				set_bit(ID, &motg->inputs);
+				set_bit(B_SESS_VLD, &motg->inputs);
+			} else {
+				set_bit(ID, &motg->inputs);
+				clear_bit(B_SESS_VLD, &motg->inputs);
+			}
+		}
+		break;
+	case USB_HOST:
+		clear_bit(ID, &motg->inputs);
+		break;
+	case USB_PERIPHERAL:
+		set_bit(ID, &motg->inputs);
+		if (otgsc & OTGSC_BSV)
+			set_bit(B_SESS_VLD, &motg->inputs);
+		else
+			clear_bit(B_SESS_VLD, &motg->inputs);
+		break;
+	default:
+		break;
+	}
+}
+
+static void msm_otg_sm_work(struct work_struct *w)
+{
+	struct msm_otg *motg = container_of(w, struct msm_otg, sm_work);
+	struct otg_transceiver *otg = &motg->otg;
+
+	switch (otg->state) {
+	case OTG_STATE_UNDEFINED:
+		dev_dbg(otg->dev, "OTG_STATE_UNDEFINED state\n");
+		msm_otg_reset(otg);
+		msm_otg_init_sm(motg);
+		otg->state = OTG_STATE_B_IDLE;
+		/* FALL THROUGH */
+	case OTG_STATE_B_IDLE:
+		dev_dbg(otg->dev, "OTG_STATE_B_IDLE state\n");
+		if (!test_bit(ID, &motg->inputs) && otg->host) {
+			/* disable BSV bit */
+			writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC);
+			msm_otg_start_host(otg, 1);
+			otg->state = OTG_STATE_A_HOST;
+		} else if (test_bit(B_SESS_VLD, &motg->inputs) && otg->gadget) {
+			msm_otg_start_peripheral(otg, 1);
+			otg->state = OTG_STATE_B_PERIPHERAL;
+		}
+		pm_runtime_put_sync(otg->dev);
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		dev_dbg(otg->dev, "OTG_STATE_B_PERIPHERAL state\n");
+		if (!test_bit(B_SESS_VLD, &motg->inputs) ||
+				!test_bit(ID, &motg->inputs)) {
+			msm_otg_start_peripheral(otg, 0);
+			otg->state = OTG_STATE_B_IDLE;
+			msm_otg_reset(otg);
+			schedule_work(w);
+		}
+		break;
+	case OTG_STATE_A_HOST:
+		dev_dbg(otg->dev, "OTG_STATE_A_HOST state\n");
+		if (test_bit(ID, &motg->inputs)) {
+			msm_otg_start_host(otg, 0);
+			otg->state = OTG_STATE_B_IDLE;
+			msm_otg_reset(otg);
+			schedule_work(w);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static irqreturn_t msm_otg_irq(int irq, void *data)
+{
+	struct msm_otg *motg = data;
+	struct otg_transceiver *otg = &motg->otg;
+	u32 otgsc = 0;
+
+	if (atomic_read(&motg->in_lpm)) {
+		disable_irq_nosync(irq);
+		motg->async_int = 1;
+		pm_runtime_get(otg->dev);
+		return IRQ_HANDLED;
+	}
+
+	otgsc = readl(USB_OTGSC);
+	if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS)))
+		return IRQ_NONE;
+
+	if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) {
+		if (otgsc & OTGSC_ID)
+			set_bit(ID, &motg->inputs);
+		else
+			clear_bit(ID, &motg->inputs);
+		dev_dbg(otg->dev, "ID set/clear\n");
+		pm_runtime_get_noresume(otg->dev);
+	} else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) {
+		if (otgsc & OTGSC_BSV)
+			set_bit(B_SESS_VLD, &motg->inputs);
+		else
+			clear_bit(B_SESS_VLD, &motg->inputs);
+		dev_dbg(otg->dev, "BSV set/clear\n");
+		pm_runtime_get_noresume(otg->dev);
+	}
+
+	writel(otgsc, USB_OTGSC);
+	schedule_work(&motg->sm_work);
+	return IRQ_HANDLED;
+}
+
+static int msm_otg_mode_show(struct seq_file *s, void *unused)
+{
+	struct msm_otg *motg = s->private;
+	struct otg_transceiver *otg = &motg->otg;
+
+	switch (otg->state) {
+	case OTG_STATE_A_HOST:
+		seq_printf(s, "host\n");
+		break;
+	case OTG_STATE_B_PERIPHERAL:
+		seq_printf(s, "peripheral\n");
+		break;
+	default:
+		seq_printf(s, "none\n");
+		break;
+	}
+
+	return 0;
+}
+
+static int msm_otg_mode_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, msm_otg_mode_show, inode->i_private);
+}
+
+static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf,
+				size_t count, loff_t *ppos)
+{
+	struct msm_otg *motg = file->private_data;
+	char buf[16];
+	struct otg_transceiver *otg = &motg->otg;
+	int status = count;
+	enum usb_mode_type req_mode;
+
+	memset(buf, 0x00, sizeof(buf));
+
+	if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) {
+		status = -EFAULT;
+		goto out;
+	}
+
+	if (!strncmp(buf, "host", 4)) {
+		req_mode = USB_HOST;
+	} else if (!strncmp(buf, "peripheral", 10)) {
+		req_mode = USB_PERIPHERAL;
+	} else if (!strncmp(buf, "none", 4)) {
+		req_mode = USB_NONE;
+	} else {
+		status = -EINVAL;
+		goto out;
+	}
+
+	switch (req_mode) {
+	case USB_NONE:
+		switch (otg->state) {
+		case OTG_STATE_A_HOST:
+		case OTG_STATE_B_PERIPHERAL:
+			set_bit(ID, &motg->inputs);
+			clear_bit(B_SESS_VLD, &motg->inputs);
+			break;
+		default:
+			goto out;
+		}
+		break;
+	case USB_PERIPHERAL:
+		switch (otg->state) {
+		case OTG_STATE_B_IDLE:
+		case OTG_STATE_A_HOST:
+			set_bit(ID, &motg->inputs);
+			set_bit(B_SESS_VLD, &motg->inputs);
+			break;
+		default:
+			goto out;
+		}
+		break;
+	case USB_HOST:
+		switch (otg->state) {
+		case OTG_STATE_B_IDLE:
+		case OTG_STATE_B_PERIPHERAL:
+			clear_bit(ID, &motg->inputs);
+			break;
+		default:
+			goto out;
+		}
+		break;
+	default:
+		goto out;
+	}
+
+	pm_runtime_get_sync(otg->dev);
+	schedule_work(&motg->sm_work);
+out:
+	return status;
+}
+
+const struct file_operations msm_otg_mode_fops = {
+	.open = msm_otg_mode_open,
+	.read = seq_read,
+	.write = msm_otg_mode_write,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static struct dentry *msm_otg_dbg_root;
+static struct dentry *msm_otg_dbg_mode;
+
+static int msm_otg_debugfs_init(struct msm_otg *motg)
+{
+	msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL);
+
+	if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root))
+		return -ENODEV;
+
+	msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR,
+				msm_otg_dbg_root, motg, &msm_otg_mode_fops);
+	if (!msm_otg_dbg_mode) {
+		debugfs_remove(msm_otg_dbg_root);
+		msm_otg_dbg_root = NULL;
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void msm_otg_debugfs_cleanup(void)
+{
+	debugfs_remove(msm_otg_dbg_mode);
+	debugfs_remove(msm_otg_dbg_root);
+}
+
+static int __init msm_otg_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	struct resource *res;
+	struct msm_otg *motg;
+	struct otg_transceiver *otg;
+
+	dev_info(&pdev->dev, "msm_otg probe\n");
+	if (!pdev->dev.platform_data) {
+		dev_err(&pdev->dev, "No platform data given. Bailing out\n");
+		return -ENODEV;
+	}
+
+	motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL);
+	if (!motg) {
+		dev_err(&pdev->dev, "unable to allocate msm_otg\n");
+		return -ENOMEM;
+	}
+
+	motg->pdata = pdev->dev.platform_data;
+	otg = &motg->otg;
+	otg->dev = &pdev->dev;
+
+	motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk");
+	if (IS_ERR(motg->phy_reset_clk)) {
+		dev_err(&pdev->dev, "failed to get usb_phy_clk\n");
+		ret = PTR_ERR(motg->phy_reset_clk);
+		goto free_motg;
+	}
+
+	motg->clk = clk_get(&pdev->dev, "usb_hs_clk");
+	if (IS_ERR(motg->clk)) {
+		dev_err(&pdev->dev, "failed to get usb_hs_clk\n");
+		ret = PTR_ERR(motg->clk);
+		goto put_phy_reset_clk;
+	}
+
+	motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk");
+	if (IS_ERR(motg->pclk)) {
+		dev_err(&pdev->dev, "failed to get usb_hs_pclk\n");
+		ret = PTR_ERR(motg->pclk);
+		goto put_clk;
+	}
+
+	/*
+	 * USB core clock is not present on all MSM chips. This
+	 * clock is introduced to remove the dependency on AXI
+	 * bus frequency.
+	 */
+	motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk");
+	if (IS_ERR(motg->core_clk))
+		motg->core_clk = NULL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get platform resource mem\n");
+		ret = -ENODEV;
+		goto put_core_clk;
+	}
+
+	motg->regs = ioremap(res->start, resource_size(res));
+	if (!motg->regs) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto put_core_clk;
+	}
+	dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs);
+
+	motg->irq = platform_get_irq(pdev, 0);
+	if (!motg->irq) {
+		dev_err(&pdev->dev, "platform_get_irq failed\n");
+		ret = -ENODEV;
+		goto free_regs;
+	}
+
+	clk_enable(motg->clk);
+	clk_enable(motg->pclk);
+	if (motg->core_clk)
+		clk_enable(motg->core_clk);
+
+	writel(0, USB_USBINTR);
+	writel(0, USB_OTGSC);
+
+	INIT_WORK(&motg->sm_work, msm_otg_sm_work);
+	ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED,
+					"msm_otg", motg);
+	if (ret) {
+		dev_err(&pdev->dev, "request irq failed\n");
+		goto disable_clks;
+	}
+
+	otg->init = msm_otg_reset;
+	otg->set_host = msm_otg_set_host;
+	otg->set_peripheral = msm_otg_set_peripheral;
+
+	otg->io_ops = &msm_otg_io_ops;
+
+	ret = otg_set_transceiver(&motg->otg);
+	if (ret) {
+		dev_err(&pdev->dev, "otg_set_transceiver failed\n");
+		goto free_irq;
+	}
+
+	platform_set_drvdata(pdev, motg);
+	device_init_wakeup(&pdev->dev, 1);
+
+	if (motg->pdata->mode == USB_OTG &&
+			motg->pdata->otg_control == OTG_USER_CONTROL) {
+		ret = msm_otg_debugfs_init(motg);
+		if (ret)
+			dev_dbg(&pdev->dev, "mode debugfs file is"
+					"not available\n");
+	}
+
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+free_irq:
+	free_irq(motg->irq, motg);
+disable_clks:
+	clk_disable(motg->pclk);
+	clk_disable(motg->clk);
+free_regs:
+	iounmap(motg->regs);
+put_core_clk:
+	if (motg->core_clk)
+		clk_put(motg->core_clk);
+	clk_put(motg->pclk);
+put_clk:
+	clk_put(motg->clk);
+put_phy_reset_clk:
+	clk_put(motg->phy_reset_clk);
+free_motg:
+	kfree(motg);
+	return ret;
+}
+
+static int __devexit msm_otg_remove(struct platform_device *pdev)
+{
+	struct msm_otg *motg = platform_get_drvdata(pdev);
+	struct otg_transceiver *otg = &motg->otg;
+	int cnt = 0;
+
+	if (otg->host || otg->gadget)
+		return -EBUSY;
+
+	msm_otg_debugfs_cleanup();
+	cancel_work_sync(&motg->sm_work);
+
+	msm_otg_resume(motg);
+
+	device_init_wakeup(&pdev->dev, 0);
+	pm_runtime_disable(&pdev->dev);
+
+	otg_set_transceiver(NULL);
+	free_irq(motg->irq, motg);
+
+	/*
+	 * Put PHY in low power mode.
+	 */
+	ulpi_read(otg, 0x14);
+	ulpi_write(otg, 0x08, 0x09);
+
+	writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC);
+	while (cnt < PHY_SUSPEND_TIMEOUT_USEC) {
+		if (readl(USB_PORTSC) & PORTSC_PHCD)
+			break;
+		udelay(1);
+		cnt++;
+	}
+	if (cnt >= PHY_SUSPEND_TIMEOUT_USEC)
+		dev_err(otg->dev, "Unable to suspend PHY\n");
+
+	clk_disable(motg->pclk);
+	clk_disable(motg->clk);
+	if (motg->core_clk)
+		clk_disable(motg->core_clk);
+
+	iounmap(motg->regs);
+	pm_runtime_set_suspended(&pdev->dev);
+
+	clk_put(motg->phy_reset_clk);
+	clk_put(motg->pclk);
+	clk_put(motg->clk);
+	if (motg->core_clk)
+		clk_put(motg->core_clk);
+
+	kfree(motg);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_RUNTIME
+static int msm_otg_runtime_idle(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+	struct otg_transceiver *otg = &motg->otg;
+
+	dev_dbg(dev, "OTG runtime idle\n");
+
+	/*
+	 * It is observed some times that a spurious interrupt
+	 * comes when PHY is put into LPM immediately after PHY reset.
+	 * This 1 sec delay also prevents entering into LPM immediately
+	 * after asynchronous interrupt.
+	 */
+	if (otg->state != OTG_STATE_UNDEFINED)
+		pm_schedule_suspend(dev, 1000);
+
+	return -EAGAIN;
+}
+
+static int msm_otg_runtime_suspend(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "OTG runtime suspend\n");
+	return msm_otg_suspend(motg);
+}
+
+static int msm_otg_runtime_resume(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "OTG runtime resume\n");
+	return msm_otg_resume(motg);
+}
+#else
+#define msm_otg_runtime_idle	NULL
+#define msm_otg_runtime_suspend	NULL
+#define msm_otg_runtime_resume	NULL
+#endif
+
+#ifdef CONFIG_PM
+static int msm_otg_pm_suspend(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "OTG PM suspend\n");
+	return msm_otg_suspend(motg);
+}
+
+static int msm_otg_pm_resume(struct device *dev)
+{
+	struct msm_otg *motg = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "OTG PM resume\n");
+
+	ret = msm_otg_resume(motg);
+	if (ret)
+		return ret;
+
+	/*
+	 * Runtime PM Documentation recommends bringing the
+	 * device to full powered state upon resume.
+	 */
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+#else
+#define msm_otg_pm_suspend	NULL
+#define msm_otg_pm_resume	NULL
+#endif
+
+static const struct dev_pm_ops msm_otg_dev_pm_ops = {
+	.runtime_suspend = msm_otg_runtime_suspend,
+	.runtime_resume  = msm_otg_runtime_resume,
+	.runtime_idle    = msm_otg_runtime_idle,
+	.suspend         = msm_otg_pm_suspend,
+	.resume          = msm_otg_pm_resume,
+};
+
+static struct platform_driver msm_otg_driver = {
+	.remove = __devexit_p(msm_otg_remove),
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+		.pm = &msm_otg_dev_pm_ops,
+	},
+};
+
+static int __init msm_otg_init(void)
+{
+	return platform_driver_probe(&msm_otg_driver, msm_otg_probe);
+}
+
+static void __exit msm_otg_exit(void)
+{
+	platform_driver_unregister(&msm_otg_driver);
+}
+
+module_init(msm_otg_init);
+module_exit(msm_otg_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MSM USB transceiver driver");
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index d335f484fcd..6ca505f333e 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -678,7 +678,8 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev)
 	/* disable complete OTG block */
 	twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
 
-	twl4030_phy_power(twl, 0);
+	if (!twl->asleep)
+		twl4030_phy_power(twl, 0);
 	regulator_put(twl->usb1v5);
 	regulator_put(twl->usb1v8);
 	regulator_put(twl->usb3v1);
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
new file mode 100644
index 00000000000..28f77010364
--- /dev/null
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -0,0 +1,493 @@
+/*
+ * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Author: Hema HK <hemahk@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/notifier.h>
+#include <linux/slab.h>
+
+/* usb register definitions */
+#define USB_VENDOR_ID_LSB		0x00
+#define USB_VENDOR_ID_MSB		0x01
+#define USB_PRODUCT_ID_LSB		0x02
+#define USB_PRODUCT_ID_MSB		0x03
+#define USB_VBUS_CTRL_SET		0x04
+#define USB_VBUS_CTRL_CLR		0x05
+#define USB_ID_CTRL_SET			0x06
+#define USB_ID_CTRL_CLR			0x07
+#define USB_VBUS_INT_SRC		0x08
+#define USB_VBUS_INT_LATCH_SET		0x09
+#define USB_VBUS_INT_LATCH_CLR		0x0A
+#define USB_VBUS_INT_EN_LO_SET		0x0B
+#define USB_VBUS_INT_EN_LO_CLR		0x0C
+#define USB_VBUS_INT_EN_HI_SET		0x0D
+#define USB_VBUS_INT_EN_HI_CLR		0x0E
+#define USB_ID_INT_SRC			0x0F
+#define USB_ID_INT_LATCH_SET		0x10
+#define USB_ID_INT_LATCH_CLR		0x11
+
+#define USB_ID_INT_EN_LO_SET		0x12
+#define USB_ID_INT_EN_LO_CLR		0x13
+#define USB_ID_INT_EN_HI_SET		0x14
+#define USB_ID_INT_EN_HI_CLR		0x15
+#define USB_OTG_ADP_CTRL		0x16
+#define USB_OTG_ADP_HIGH		0x17
+#define USB_OTG_ADP_LOW			0x18
+#define USB_OTG_ADP_RISE		0x19
+#define USB_OTG_REVISION		0x1A
+
+/* to be moved to LDO */
+#define TWL6030_MISC2			0xE5
+#define TWL6030_CFG_LDO_PD2		0xF5
+#define TWL6030_BACKUP_REG		0xFA
+
+#define STS_HW_CONDITIONS		0x21
+
+/* In module TWL6030_MODULE_PM_MASTER */
+#define STS_HW_CONDITIONS		0x21
+#define STS_USB_ID			BIT(2)
+
+/* In module TWL6030_MODULE_PM_RECEIVER */
+#define VUSB_CFG_TRANS			0x71
+#define VUSB_CFG_STATE			0x72
+#define VUSB_CFG_VOLTAGE		0x73
+
+/* in module TWL6030_MODULE_MAIN_CHARGE */
+
+#define CHARGERUSB_CTRL1		0x8
+
+#define CONTROLLER_STAT1		0x03
+#define	VBUS_DET			BIT(2)
+
+struct twl6030_usb {
+	struct otg_transceiver	otg;
+	struct device		*dev;
+
+	/* for vbus reporting with irqs disabled */
+	spinlock_t		lock;
+
+	struct regulator		*usb3v3;
+
+	int			irq1;
+	int			irq2;
+	u8			linkstat;
+	u8			asleep;
+	bool			irq_enabled;
+};
+
+#define xceiv_to_twl(x)		container_of((x), struct twl6030_usb, otg);
+
+/*-------------------------------------------------------------------------*/
+
+static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module,
+						u8 data, u8 address)
+{
+	int ret = 0;
+
+	ret = twl_i2c_write_u8(module, data, address);
+	if (ret < 0)
+		dev_err(twl->dev,
+			"Write[0x%x] Error %d\n", address, ret);
+	return ret;
+}
+
+static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address)
+{
+	u8 data, ret = 0;
+
+	ret = twl_i2c_read_u8(module, &data, address);
+	if (ret >= 0)
+		ret = data;
+	else
+		dev_err(twl->dev,
+			"readb[0x%x,0x%x] Error %d\n",
+					module, address, ret);
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*/
+static int twl6030_set_phy_clk(struct otg_transceiver *x, int on)
+{
+	struct twl6030_usb *twl;
+	struct device *dev;
+	struct twl4030_usb_data *pdata;
+
+	twl = xceiv_to_twl(x);
+	dev  = twl->dev;
+	pdata = dev->platform_data;
+
+	pdata->phy_set_clock(twl->dev, on);
+
+	return 0;
+}
+
+static int twl6030_phy_init(struct otg_transceiver *x)
+{
+	u8 hw_state;
+	struct twl6030_usb *twl;
+	struct device *dev;
+	struct twl4030_usb_data *pdata;
+
+	twl = xceiv_to_twl(x);
+	dev  = twl->dev;
+	pdata = dev->platform_data;
+
+	regulator_enable(twl->usb3v3);
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	if (hw_state & STS_USB_ID)
+		pdata->phy_power(twl->dev, 1, 1);
+	else
+		pdata->phy_power(twl->dev, 0, 1);
+
+	return 0;
+}
+
+static void twl6030_phy_shutdown(struct otg_transceiver *x)
+{
+	struct twl6030_usb *twl;
+	struct device *dev;
+	struct twl4030_usb_data *pdata;
+
+	twl = xceiv_to_twl(x);
+	dev  = twl->dev;
+	pdata = dev->platform_data;
+	pdata->phy_power(twl->dev, 0, 0);
+	regulator_disable(twl->usb3v3);
+}
+
+static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
+{
+
+	/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
+
+	/* Program CFG_LDO_PD2 register and set VUSB bit */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2);
+
+	/* Program MISC2 register and set bit VUSB_IN_VBAT */
+	twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
+
+	twl->usb3v3 = regulator_get(twl->dev, "vusb");
+	if (IS_ERR(twl->usb3v3))
+		return -ENODEV;
+
+	regulator_enable(twl->usb3v3);
+
+	/* Program the VUSB_CFG_TRANS for ACTIVE state. */
+	twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0x3F,
+						VUSB_CFG_TRANS);
+
+	/* Program the VUSB_CFG_STATE register to ON on all groups. */
+	twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0xE1,
+						VUSB_CFG_STATE);
+
+	/* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET);
+
+	/*
+	 * Program the USB_ID_CTRL_SET register to enable GND drive
+	 * and the ID comparators
+	 */
+	twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET);
+
+	return 0;
+}
+
+static ssize_t twl6030_usb_vbus_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct twl6030_usb *twl = dev_get_drvdata(dev);
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	spin_lock_irqsave(&twl->lock, flags);
+
+	switch (twl->linkstat) {
+	case USB_EVENT_VBUS:
+	       ret = snprintf(buf, PAGE_SIZE, "vbus\n");
+	       break;
+	case USB_EVENT_ID:
+	       ret = snprintf(buf, PAGE_SIZE, "id\n");
+	       break;
+	case USB_EVENT_NONE:
+	       ret = snprintf(buf, PAGE_SIZE, "none\n");
+	       break;
+	default:
+	       ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n");
+	}
+	spin_unlock_irqrestore(&twl->lock, flags);
+
+	return ret;
+}
+static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL);
+
+static irqreturn_t twl6030_usb_irq(int irq, void *_twl)
+{
+	struct twl6030_usb *twl = _twl;
+	int status;
+	u8 vbus_state, hw_state;
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE,
+						CONTROLLER_STAT1);
+	if (!(hw_state & STS_USB_ID)) {
+		if (vbus_state & VBUS_DET) {
+			status = USB_EVENT_VBUS;
+			twl->otg.default_a = false;
+			twl->otg.state = OTG_STATE_B_IDLE;
+		} else {
+			status = USB_EVENT_NONE;
+		}
+		if (status >= 0) {
+			twl->linkstat = status;
+			blocking_notifier_call_chain(&twl->otg.notifier,
+						status, twl->otg.gadget);
+		}
+	}
+	sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl)
+{
+	struct twl6030_usb *twl = _twl;
+	int status = USB_EVENT_NONE;
+	u8 hw_state;
+
+	hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS);
+
+	if (hw_state & STS_USB_ID) {
+
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1);
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
+								0x10);
+		status = USB_EVENT_ID;
+		twl->otg.default_a = true;
+		twl->otg.state = OTG_STATE_A_IDLE;
+		blocking_notifier_call_chain(&twl->otg.notifier, status,
+							twl->otg.gadget);
+	} else  {
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR,
+								0x10);
+		twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET,
+								0x1);
+	}
+	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status);
+	twl->linkstat = status;
+
+	return IRQ_HANDLED;
+}
+
+static int twl6030_set_peripheral(struct otg_transceiver *x,
+		struct usb_gadget *gadget)
+{
+	struct twl6030_usb *twl;
+
+	if (!x)
+		return -ENODEV;
+
+	twl = xceiv_to_twl(x);
+	twl->otg.gadget = gadget;
+	if (!gadget)
+		twl->otg.state = OTG_STATE_UNDEFINED;
+
+	return 0;
+}
+
+static int twl6030_enable_irq(struct otg_transceiver *x)
+{
+	struct twl6030_usb *twl = xceiv_to_twl(x);
+
+	twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x1);
+	twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C);
+	twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C);
+
+	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+				REG_INT_MSK_LINE_C);
+	twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK,
+				REG_INT_MSK_STS_C);
+	twl6030_usb_irq(twl->irq2, twl);
+	twl6030_usbotg_irq(twl->irq1, twl);
+
+	return 0;
+}
+
+static int twl6030_set_vbus(struct otg_transceiver *x, bool enabled)
+{
+	struct twl6030_usb *twl = xceiv_to_twl(x);
+
+	/*
+	 * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1
+	 * register. This enables boost mode.
+	 */
+	if (enabled)
+		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40,
+						CHARGERUSB_CTRL1);
+	 else
+		twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00,
+						CHARGERUSB_CTRL1);
+	return 0;
+}
+
+static int twl6030_set_host(struct otg_transceiver *x, struct usb_bus *host)
+{
+	struct twl6030_usb *twl;
+
+	if (!x)
+		return -ENODEV;
+
+	twl = xceiv_to_twl(x);
+	twl->otg.host = host;
+	if (!host)
+		twl->otg.state = OTG_STATE_UNDEFINED;
+	return 0;
+}
+
+static int __devinit twl6030_usb_probe(struct platform_device *pdev)
+{
+	struct twl6030_usb	*twl;
+	int			status, err;
+	struct twl4030_usb_data *pdata;
+	struct device *dev = &pdev->dev;
+	pdata = dev->platform_data;
+
+	twl = kzalloc(sizeof *twl, GFP_KERNEL);
+	if (!twl)
+		return -ENOMEM;
+
+	twl->dev		= &pdev->dev;
+	twl->irq1		= platform_get_irq(pdev, 0);
+	twl->irq2		= platform_get_irq(pdev, 1);
+	twl->otg.dev		= twl->dev;
+	twl->otg.label		= "twl6030";
+	twl->otg.set_host	= twl6030_set_host;
+	twl->otg.set_peripheral	= twl6030_set_peripheral;
+	twl->otg.set_vbus	= twl6030_set_vbus;
+	twl->otg.init		= twl6030_phy_init;
+	twl->otg.shutdown	= twl6030_phy_shutdown;
+
+	/* init spinlock for workqueue */
+	spin_lock_init(&twl->lock);
+
+	err = twl6030_usb_ldo_init(twl);
+	if (err) {
+		dev_err(&pdev->dev, "ldo init failed\n");
+		kfree(twl);
+		return err;
+	}
+	otg_set_transceiver(&twl->otg);
+
+	platform_set_drvdata(pdev, twl);
+	if (device_create_file(&pdev->dev, &dev_attr_vbus))
+		dev_warn(&pdev->dev, "could not create sysfs file\n");
+
+	BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier);
+
+	twl->irq_enabled = true;
+	status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"twl6030_usb", twl);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+			twl->irq1, status);
+		device_remove_file(twl->dev, &dev_attr_vbus);
+		kfree(twl);
+		return status;
+	}
+
+	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"twl6030_usb", twl);
+	if (status < 0) {
+		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
+			twl->irq2, status);
+		free_irq(twl->irq1, twl);
+		device_remove_file(twl->dev, &dev_attr_vbus);
+		kfree(twl);
+		return status;
+	}
+
+	pdata->phy_init(dev);
+	twl6030_enable_irq(&twl->otg);
+	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
+
+	return 0;
+}
+
+static int __exit twl6030_usb_remove(struct platform_device *pdev)
+{
+	struct twl6030_usb *twl = platform_get_drvdata(pdev);
+
+	struct twl4030_usb_data *pdata;
+	struct device *dev = &pdev->dev;
+	pdata = dev->platform_data;
+
+	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+		REG_INT_MSK_LINE_C);
+	twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK,
+			REG_INT_MSK_STS_C);
+	free_irq(twl->irq1, twl);
+	free_irq(twl->irq2, twl);
+	regulator_put(twl->usb3v3);
+	pdata->phy_exit(twl->dev);
+	device_remove_file(twl->dev, &dev_attr_vbus);
+	kfree(twl);
+
+	return 0;
+}
+
+static struct platform_driver twl6030_usb_driver = {
+	.probe		= twl6030_usb_probe,
+	.remove		= __exit_p(twl6030_usb_remove),
+	.driver		= {
+		.name	= "twl6030_usb",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init twl6030_usb_init(void)
+{
+	return platform_driver_register(&twl6030_usb_driver);
+}
+subsys_initcall(twl6030_usb_init);
+
+static void __exit twl6030_usb_exit(void)
+{
+	platform_driver_unregister(&twl6030_usb_driver);
+}
+module_exit(twl6030_usb_exit);
+
+MODULE_ALIAS("platform:twl6030_usb");
+MODULE_AUTHOR("Hema HK <hemahk@ti.com>");
+MODULE_DESCRIPTION("TWL6030 USB transceiver driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 89a9a584780..a2668d08926 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -75,6 +75,7 @@ struct ftdi_private {
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	char prev_status, diff_status;        /* Used for TIOCMIWAIT */
+	char transmit_empty;	/* If transmitter is empty or not */
 	struct usb_serial_port *port;
 	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
 				   (0 for FT232/245) */
@@ -201,6 +202,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+	{ USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
 	{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -696,6 +698,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+	{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
 	{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
@@ -794,6 +797,9 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LOGBOOKML_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
+	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
@@ -1318,6 +1324,23 @@ check_and_exit:
 	return 0;
 }
 
+static int get_lsr_info(struct usb_serial_port *port,
+			struct serial_struct __user *retinfo)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	unsigned int result = 0;
+
+	if (!retinfo)
+		return -EFAULT;
+
+	if (priv->transmit_empty)
+		result = TIOCSER_TEMT;
+
+	if (copy_to_user(retinfo, &result, sizeof(unsigned int)))
+		return -EFAULT;
+	return 0;
+}
+
 
 /* Determine type of FTDI chip based on USB config and descriptor. */
 static void ftdi_determine_type(struct usb_serial_port *port)
@@ -1867,6 +1890,12 @@ static int ftdi_process_packet(struct tty_struct *tty,
 			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
 	}
 
+	/* save if the transmitter is empty or not */
+	if (packet[1] & FTDI_RS_TEMT)
+		priv->transmit_empty = 1;
+	else
+		priv->transmit_empty = 0;
+
 	len -= 2;
 	if (!len)
 		return 0;	/* status only */
@@ -2230,6 +2259,9 @@ static int ftdi_ioctl(struct tty_struct *tty, struct file *file,
 			}
 		}
 		return 0;
+	case TIOCSERGETLSR:
+		return get_lsr_info(port, (struct serial_struct __user *)arg);
+		break;
 	default:
 		break;
 	}
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 7dfe02f1fb6..bf086728548 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -114,6 +114,9 @@
 /* Lenz LI-USB Computer Interface. */
 #define FTDI_LENZ_LIUSB_PID	0xD780
 
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID	0xF070
+
 /*
  * Xsens Technologies BV products (http://www.xsens.com).
  */
@@ -721,6 +724,7 @@
  */
 #define RTSYSTEMS_VID			0x2100	/* Vendor ID */
 #define RTSYSTEMS_SERIAL_VX7_PID	0x9e52	/* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID		0x9e54	/* CT29B Radio Cable */
 
 /*
  * Bayer Ascensia Contour blood glucose meter USB-converter cable.
@@ -1077,6 +1081,11 @@
 #define MJSG_HD_RADIO_PID	0x937C
 
 /*
+ * D.O.Tec products (http://www.directout.eu)
+ */
+#define FTDI_DOTEC_PID 0x9868
+
+/*
  * Xverve Signalyzer tools (http://www.signalyzer.com/)
  */
 #define XVERVE_SIGNALYZER_ST_PID	0xBCA0
@@ -1100,3 +1109,10 @@
 #define FTDI_SCIENCESCOPE_LOGBOOKML_PID		0xFF18
 #define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID	0xFF1C
 #define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID	0xFF1D
+
+/*
+ * Milkymist One JTAG/Serial
+ */
+#define QIHARDWARE_VID			0x20B7
+#define MILKYMISTONE_JTAGSERIAL_PID	0x0713
+
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2297fb1bcf6..cdfb1868cae 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -518,7 +518,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) },
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) },
@@ -989,6 +989,7 @@ static struct usb_serial_driver option_1port_device = {
 	.set_termios       = usb_wwan_set_termios,
 	.tiocmget          = usb_wwan_tiocmget,
 	.tiocmset          = usb_wwan_tiocmset,
+	.ioctl             = usb_wwan_ioctl,
 	.attach            = usb_wwan_startup,
 	.disconnect        = usb_wwan_disconnect,
 	.release           = usb_wwan_release,
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index e199b0f4f99..5be866bb7a4 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -613,9 +613,8 @@ static void oti6858_close(struct usb_serial_port *port)
 	dbg("%s(): after buf_clear()", __func__);
 
 	/* cancel scheduled setup */
-	cancel_delayed_work(&priv->delayed_setup_work);
-	cancel_delayed_work(&priv->delayed_write_work);
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&priv->delayed_setup_work);
+	cancel_delayed_work_sync(&priv->delayed_write_work);
 
 	/* shutdown our urbs */
 	dbg("%s(): shutting down urbs", __func__);
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index f5312dd3331..8359ec79895 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -79,7 +79,6 @@ struct ssu100_port_private {
 	u8 shadowLSR;
 	u8 shadowMSR;
 	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
-	unsigned short max_packet_size;
 	struct async_icount icount;
 };
 
@@ -464,36 +463,6 @@ static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
 	return -ENOIOCTLCMD;
 }
 
-static void ssu100_set_max_packet_size(struct usb_serial_port *port)
-{
-	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
-	struct usb_serial *serial = port->serial;
-	struct usb_device *udev = serial->dev;
-
-	struct usb_interface *interface = serial->interface;
-	struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
-
-	unsigned num_endpoints;
-	int i;
-	unsigned long flags;
-
-	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
-	dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
-
-	for (i = 0; i < num_endpoints; i++) {
-		dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
-			interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
-		ep_desc = &interface->cur_altsetting->endpoint[i].desc;
-	}
-
-	/* set max packet size based on descriptor */
-	spin_lock_irqsave(&priv->status_lock, flags);
-	priv->max_packet_size = ep_desc->wMaxPacketSize;
-	spin_unlock_irqrestore(&priv->status_lock, flags);
-
-	dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
-}
-
 static int ssu100_attach(struct usb_serial *serial)
 {
 	struct ssu100_port_private *priv;
@@ -511,7 +480,6 @@ static int ssu100_attach(struct usb_serial *serial)
 	spin_lock_init(&priv->status_lock);
 	init_waitqueue_head(&priv->delta_msr_wait);
 	usb_set_serial_port_data(port, priv);
-	ssu100_set_max_packet_size(port);
 
 	return ssu100_initdevice(serial->dev);
 }
@@ -641,13 +609,14 @@ static void ssu100_update_lsr(struct usb_serial_port *port, u8 lsr,
 
 }
 
-static int ssu100_process_packet(struct tty_struct *tty,
-				 struct usb_serial_port *port,
-				 struct ssu100_port_private *priv,
-				 char *packet, int len)
+static int ssu100_process_packet(struct urb *urb,
+				 struct tty_struct *tty)
 {
-	int i;
+	struct usb_serial_port *port = urb->context;
+	char *packet = (char *)urb->transfer_buffer;
 	char flag = TTY_NORMAL;
+	u32 len = urb->actual_length;
+	int i;
 	char *ch;
 
 	dbg("%s - port %d", __func__, port->number);
@@ -685,12 +654,8 @@ static int ssu100_process_packet(struct tty_struct *tty,
 static void ssu100_process_read_urb(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
-	char *data = (char *)urb->transfer_buffer;
 	struct tty_struct *tty;
-	int count = 0;
-	int i;
-	int len;
+	int count;
 
 	dbg("%s", __func__);
 
@@ -698,10 +663,7 @@ static void ssu100_process_read_urb(struct urb *urb)
 	if (!tty)
 		return;
 
-	for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
-		len = min_t(int, urb->actual_length - i, priv->max_packet_size);
-		count += ssu100_process_packet(tty, port, priv, &data[i], len);
-	}
+	count = ssu100_process_packet(urb, tty);
 
 	if (count)
 		tty_flip_buffer_push(tty);
@@ -717,8 +679,6 @@ static struct usb_serial_driver ssu100_device = {
 	.id_table	     = id_table,
 	.usb_driver	     = &ssu100_driver,
 	.num_ports	     = 1,
-	.bulk_in_size        = 256,
-	.bulk_out_size       = 256,
 	.open		     = ssu100_open,
 	.close		     = ssu100_close,
 	.attach              = ssu100_attach,
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index e64da74bdcc..6954de50c0f 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -21,7 +21,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
@@ -52,6 +51,7 @@ static struct usb_driver usb_serial_driver = {
 	.suspend =	usb_serial_suspend,
 	.resume =	usb_serial_resume,
 	.no_dynamic_id = 	1,
+	.supports_autosuspend =	1,
 };
 
 /* There is no MODULE_DEVICE_TABLE for usbserial.c.  Instead
@@ -1344,6 +1344,8 @@ int usb_serial_register(struct usb_serial_driver *driver)
 		return -ENODEV;
 
 	fixup_generic(driver);
+	if (driver->usb_driver)
+		driver->usb_driver->supports_autosuspend = 1;
 
 	if (!driver->description)
 		driver->description = driver->driver.name;
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
index 2be298a1305..3ab77c5d981 100644
--- a/drivers/usb/serial/usb-wwan.h
+++ b/drivers/usb/serial/usb-wwan.h
@@ -18,6 +18,8 @@ extern void usb_wwan_set_termios(struct tty_struct *tty,
 extern int usb_wwan_tiocmget(struct tty_struct *tty, struct file *file);
 extern int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
 			     unsigned int set, unsigned int clear);
+extern int usb_wwan_ioctl(struct tty_struct *tty, struct file *file,
+			  unsigned int cmd, unsigned long arg);
 extern int usb_wwan_send_setup(struct usb_serial_port *port);
 extern int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
 			  const unsigned char *buf, int count);
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index fbc94679780..b004b2a485c 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -31,8 +31,10 @@
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/bitops.h>
+#include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/serial.h>
 #include "usb-wwan.h"
 
 static int debug;
@@ -123,6 +125,83 @@ int usb_wwan_tiocmset(struct tty_struct *tty, struct file *file,
 }
 EXPORT_SYMBOL(usb_wwan_tiocmset);
 
+static int get_serial_info(struct usb_serial_port *port,
+			   struct serial_struct __user *retinfo)
+{
+	struct serial_struct tmp;
+
+	if (!retinfo)
+		return -EFAULT;
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.line            = port->serial->minor;
+	tmp.port            = port->number;
+	tmp.baud_base       = tty_get_baud_rate(port->port.tty);
+	tmp.close_delay	    = port->port.close_delay / 10;
+	tmp.closing_wait    = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+				 ASYNC_CLOSING_WAIT_NONE :
+				 port->port.closing_wait / 10;
+
+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int set_serial_info(struct usb_serial_port *port,
+			   struct serial_struct __user *newinfo)
+{
+	struct serial_struct new_serial;
+	unsigned int closing_wait, close_delay;
+	int retval = 0;
+
+	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+		return -EFAULT;
+
+	close_delay = new_serial.close_delay * 10;
+	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+			ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
+
+	mutex_lock(&port->port.mutex);
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		if ((close_delay != port->port.close_delay) ||
+		    (closing_wait != port->port.closing_wait))
+			retval = -EPERM;
+		else
+			retval = -EOPNOTSUPP;
+	} else {
+		port->port.close_delay  = close_delay;
+		port->port.closing_wait = closing_wait;
+	}
+
+	mutex_unlock(&port->port.mutex);
+	return retval;
+}
+
+int usb_wwan_ioctl(struct tty_struct *tty, struct file *file,
+		   unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+
+	dbg("%s cmd 0x%04x", __func__, cmd);
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		return get_serial_info(port,
+				       (struct serial_struct __user *) arg);
+	case TIOCSSERIAL:
+		return set_serial_info(port,
+				       (struct serial_struct __user *) arg);
+	default:
+		break;
+	}
+
+	dbg("%s arg not supported", __func__);
+
+	return -ENOIOCTLCMD;
+}
+EXPORT_SYMBOL(usb_wwan_ioctl);
+
 /* Write */
 int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
 		   const unsigned char *buf, int count)
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index a688b1e686e..689ee1fb702 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -285,7 +285,7 @@ static int slave_configure(struct scsi_device *sdev)
 
 /* queue a command */
 /* This is always called with scsi_lock(host) held */
-static int queuecommand(struct scsi_cmnd *srb,
+static int queuecommand_lck(struct scsi_cmnd *srb,
 			void (*done)(struct scsi_cmnd *))
 {
 	struct us_data *us = host_to_us(srb->device->host);
@@ -315,6 +315,8 @@ static int queuecommand(struct scsi_cmnd *srb,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(queuecommand)
+
 /***********************************************************************
  * Error handling functions
  ***********************************************************************/
diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c
index 57fc2f532ca..ceba512f84d 100644
--- a/drivers/usb/storage/sierra_ms.c
+++ b/drivers/usb/storage/sierra_ms.c
@@ -121,7 +121,7 @@ static ssize_t show_truinst(struct device *dev, struct device_attribute *attr,
 	}
 	return result;
 }
-static DEVICE_ATTR(truinst, S_IWUGO | S_IRUGO, show_truinst, NULL);
+static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL);
 
 int sierra_ms_init(struct us_data *us)
 {
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 2054b1e25a6..23f0dd9c36d 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -49,14 +49,17 @@ struct command_iu {
 	__u8 cdb[16];	/* XXX: Overflow-checking tools may misunderstand */
 };
 
+/*
+ * Also used for the Read Ready and Write Ready IUs since they have the
+ * same first four bytes
+ */
 struct sense_iu {
 	__u8 iu_id;
 	__u8 rsvd1;
 	__be16 tag;
 	__be16 status_qual;
 	__u8 status;
-	__u8 service_response;
-	__u8 rsvd8[6];
+	__u8 rsvd7[7];
 	__be16 len;
 	__u8 sense[SCSI_SENSE_BUFFERSIZE];
 };
@@ -97,8 +100,8 @@ struct uas_dev_info {
 };
 
 enum {
-	ALLOC_SENSE_URB		= (1 << 0),
-	SUBMIT_SENSE_URB	= (1 << 1),
+	ALLOC_STATUS_URB	= (1 << 0),
+	SUBMIT_STATUS_URB	= (1 << 1),
 	ALLOC_DATA_IN_URB	= (1 << 2),
 	SUBMIT_DATA_IN_URB	= (1 << 3),
 	ALLOC_DATA_OUT_URB	= (1 << 4),
@@ -112,7 +115,7 @@ struct uas_cmd_info {
 	unsigned int state;
 	unsigned int stream;
 	struct urb *cmd_urb;
-	struct urb *sense_urb;
+	struct urb *status_urb;
 	struct urb *data_in_urb;
 	struct urb *data_out_urb;
 	struct list_head list;
@@ -138,7 +141,7 @@ static void uas_do_work(struct work_struct *work)
 		struct scsi_pointer *scp = (void *)cmdinfo;
 		struct scsi_cmnd *cmnd = container_of(scp,
 							struct scsi_cmnd, SCp);
-		uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_KERNEL);
+		uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO);
 	}
 }
 
@@ -204,7 +207,7 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd,
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 	int err;
 
-	cmdinfo->state = direction | SUBMIT_SENSE_URB;
+	cmdinfo->state = direction | SUBMIT_STATUS_URB;
 	err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC);
 	if (err) {
 		spin_lock(&uas_work_lock);
@@ -294,7 +297,7 @@ static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 	if (!urb)
 		goto out;
 
-	iu = kmalloc(sizeof(*iu), gfp);
+	iu = kzalloc(sizeof(*iu), gfp);
 	if (!iu)
 		goto free;
 
@@ -325,16 +328,13 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
 	if (len < 0)
 		len = 0;
 	len = ALIGN(len, 4);
-	iu = kmalloc(sizeof(*iu) + len, gfp);
+	iu = kzalloc(sizeof(*iu) + len, gfp);
 	if (!iu)
 		goto free;
 
 	iu->iu_id = IU_ID_COMMAND;
 	iu->tag = cpu_to_be16(stream_id);
-	if (sdev->ordered_tags && (cmnd->request->cmd_flags & REQ_HARDBARRIER))
-		iu->prio_attr = UAS_ORDERED_TAG;
-	else
-		iu->prio_attr = UAS_SIMPLE_TAG;
+	iu->prio_attr = UAS_SIMPLE_TAG;
 	iu->len = len;
 	int_to_scsilun(sdev->lun, &iu->lun);
 	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len);
@@ -360,21 +360,21 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 {
 	struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp;
 
-	if (cmdinfo->state & ALLOC_SENSE_URB) {
-		cmdinfo->sense_urb = uas_alloc_sense_urb(devinfo, gfp, cmnd,
-							cmdinfo->stream);
-		if (!cmdinfo->sense_urb)
+	if (cmdinfo->state & ALLOC_STATUS_URB) {
+		cmdinfo->status_urb = uas_alloc_sense_urb(devinfo, gfp, cmnd,
+							  cmdinfo->stream);
+		if (!cmdinfo->status_urb)
 			return SCSI_MLQUEUE_DEVICE_BUSY;
-		cmdinfo->state &= ~ALLOC_SENSE_URB;
+		cmdinfo->state &= ~ALLOC_STATUS_URB;
 	}
 
-	if (cmdinfo->state & SUBMIT_SENSE_URB) {
-		if (usb_submit_urb(cmdinfo->sense_urb, gfp)) {
+	if (cmdinfo->state & SUBMIT_STATUS_URB) {
+		if (usb_submit_urb(cmdinfo->status_urb, gfp)) {
 			scmd_printk(KERN_INFO, cmnd,
 					"sense urb submission failure\n");
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
-		cmdinfo->state &= ~SUBMIT_SENSE_URB;
+		cmdinfo->state &= ~SUBMIT_STATUS_URB;
 	}
 
 	if (cmdinfo->state & ALLOC_DATA_IN_URB) {
@@ -433,7 +433,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
 	return 0;
 }
 
-static int uas_queuecommand(struct scsi_cmnd *cmnd,
+static int uas_queuecommand_lck(struct scsi_cmnd *cmnd,
 					void (*done)(struct scsi_cmnd *))
 {
 	struct scsi_device *sdev = cmnd->device;
@@ -443,7 +443,7 @@ static int uas_queuecommand(struct scsi_cmnd *cmnd,
 
 	BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer));
 
-	if (!cmdinfo->sense_urb && sdev->current_cmnd)
+	if (!cmdinfo->status_urb && sdev->current_cmnd)
 		return SCSI_MLQUEUE_DEVICE_BUSY;
 
 	if (blk_rq_tagged(cmnd->request)) {
@@ -455,7 +455,7 @@ static int uas_queuecommand(struct scsi_cmnd *cmnd,
 
 	cmnd->scsi_done = done;
 
-	cmdinfo->state = ALLOC_SENSE_URB | SUBMIT_SENSE_URB |
+	cmdinfo->state = ALLOC_STATUS_URB | SUBMIT_STATUS_URB |
 			ALLOC_CMD_URB | SUBMIT_CMD_URB;
 
 	switch (cmnd->sc_data_direction) {
@@ -478,8 +478,8 @@ static int uas_queuecommand(struct scsi_cmnd *cmnd,
 	err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC);
 	if (err) {
 		/* If we did nothing, give up now */
-		if (cmdinfo->state & SUBMIT_SENSE_URB) {
-			usb_free_urb(cmdinfo->sense_urb);
+		if (cmdinfo->state & SUBMIT_STATUS_URB) {
+			usb_free_urb(cmdinfo->status_urb);
 			return SCSI_MLQUEUE_DEVICE_BUSY;
 		}
 		spin_lock(&uas_work_lock);
@@ -491,6 +491,8 @@ static int uas_queuecommand(struct scsi_cmnd *cmnd,
 	return 0;
 }
 
+static DEF_SCSI_QCMD(uas_queuecommand)
+
 static int uas_eh_abort_handler(struct scsi_cmnd *cmnd)
 {
 	struct scsi_device *sdev = cmnd->device;
@@ -579,6 +581,34 @@ static struct usb_device_id uas_usb_ids[] = {
 };
 MODULE_DEVICE_TABLE(usb, uas_usb_ids);
 
+static int uas_is_interface(struct usb_host_interface *intf)
+{
+	return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE &&
+		intf->desc.bInterfaceSubClass == USB_SC_SCSI &&
+		intf->desc.bInterfaceProtocol == USB_PR_UAS);
+}
+
+static int uas_switch_interface(struct usb_device *udev,
+						struct usb_interface *intf)
+{
+	int i;
+
+	if (uas_is_interface(intf->cur_altsetting))
+		return 0;
+
+	for (i = 0; i < intf->num_altsetting; i++) {
+		struct usb_host_interface *alt = &intf->altsetting[i];
+		if (alt == intf->cur_altsetting)
+			continue;
+		if (uas_is_interface(alt))
+			return usb_set_interface(udev,
+						alt->desc.bInterfaceNumber,
+						alt->desc.bAlternateSetting);
+	}
+
+	return -ENODEV;
+}
+
 static void uas_configure_endpoints(struct uas_dev_info *devinfo)
 {
 	struct usb_host_endpoint *eps[4] = { };
@@ -652,13 +682,8 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	struct uas_dev_info *devinfo;
 	struct usb_device *udev = interface_to_usbdev(intf);
 
-	if (id->bInterfaceProtocol == 0x50) {
-		int ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-/* XXX: Shouldn't assume that 1 is the alternative we want */
-		int ret = usb_set_interface(udev, ifnum, 1);
-		if (ret)
-			return -ENODEV;
-	}
+	if (uas_switch_interface(udev, intf))
+		return -ENODEV;
 
 	devinfo = kmalloc(sizeof(struct uas_dev_info), GFP_KERNEL);
 	if (!devinfo)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 6ccdd3dd525..fcc1e32ce25 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -481,6 +481,13 @@ UNUSUAL_DEV(  0x04e8, 0x507c, 0x0220, 0x0220,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64),
 
+/* Reported by Vitaly Kuznetsov <vitty@altlinux.ru> */
+UNUSUAL_DEV(  0x04e8, 0x5122, 0x0000, 0x9999,
+		"Samsung",
+		"YP-CP3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
  * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
diff --git a/drivers/uwb/allocator.c b/drivers/uwb/allocator.c
index 436e4f7110c..e45e673b877 100644
--- a/drivers/uwb/allocator.c
+++ b/drivers/uwb/allocator.c
@@ -326,7 +326,8 @@ int uwb_rsv_find_best_allocation(struct uwb_rsv *rsv, struct uwb_mas_bm *availab
 	int bit_index;
 
 	ai = kzalloc(sizeof(struct uwb_rsv_alloc_info), GFP_KERNEL);
-	
+	if (!ai)
+		return UWB_RSV_ALLOC_NOT_FOUND;
 	ai->min_mas = rsv->min_mas;
 	ai->max_mas = rsv->max_mas;
 	ai->max_interval = rsv->max_interval;
diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c
index f2eb4d8b76c..d5de5e131d4 100644
--- a/drivers/uwb/i1480/i1480-est.c
+++ b/drivers/uwb/i1480/i1480-est.c
@@ -91,7 +91,7 @@ MODULE_LICENSE("GPL");
  *
  * [so we are loaded when this kind device is connected]
  */
-static struct usb_device_id i1480_est_id_table[] = {
+static struct usb_device_id __used i1480_est_id_table[] = {
 	{ USB_DEVICE(0x8086, 0xdf3b), },
 	{ USB_DEVICE(0x8086, 0x0c3b), },
 	{ },
diff --git a/drivers/uwb/umc-dev.c b/drivers/uwb/umc-dev.c
index 43ea9982e68..ccd2184e05d 100644
--- a/drivers/uwb/umc-dev.c
+++ b/drivers/uwb/umc-dev.c
@@ -54,11 +54,8 @@ int umc_device_register(struct umc_dev *umc)
 
 	err = request_resource(umc->resource.parent, &umc->resource);
 	if (err < 0) {
-		dev_err(&umc->dev, "can't allocate resource range "
-			"%016Lx to %016Lx: %d\n",
-			(unsigned long long)umc->resource.start,
-			(unsigned long long)umc->resource.end,
-			err);
+		dev_err(&umc->dev, "can't allocate resource range %pR: %d\n",
+			&umc->resource, err);
 		goto error_request_resource;
 	}
 
diff --git a/drivers/uwb/whc-rc.c b/drivers/uwb/whc-rc.c
index 73495583c44..70a004aa19d 100644
--- a/drivers/uwb/whc-rc.c
+++ b/drivers/uwb/whc-rc.c
@@ -449,7 +449,7 @@ static int whcrc_post_reset(struct umc_dev *umc)
 }
 
 /* PCI device ID's that we handle [so it gets loaded] */
-static struct pci_device_id whcrc_id_table[] = {
+static struct pci_device_id __used whcrc_id_table[] = {
 	{ PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) },
 	{ /* empty last entry */ }
 };
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 4b4da5b86ff..9b3ca103135 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -10,7 +10,6 @@
 #include <linux/eventfd.h>
 #include <linux/vhost.h>
 #include <linux/virtio_net.h>
-#include <linux/mmu_context.h>
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -129,8 +128,9 @@ static void handle_tx(struct vhost_net *net)
 	size_t hdr_size;
 	struct socket *sock;
 
-	sock = rcu_dereference_check(vq->private_data,
-				     lockdep_is_held(&vq->mutex));
+	/* TODO: check that we are running from vhost_worker?
+	 * Not sure it's worth it, it's straight-forward enough. */
+	sock = rcu_dereference_check(vq->private_data, 1);
 	if (!sock)
 		return;
 
@@ -142,7 +142,6 @@ static void handle_tx(struct vhost_net *net)
 		return;
 	}
 
-	use_mm(net->dev.mm);
 	mutex_lock(&vq->mutex);
 	vhost_disable_notify(vq);
 
@@ -207,7 +206,6 @@ static void handle_tx(struct vhost_net *net)
 	}
 
 	mutex_unlock(&vq->mutex);
-	unuse_mm(net->dev.mm);
 }
 
 static int peek_head_len(struct sock *sk)
@@ -312,7 +310,6 @@ static void handle_rx_big(struct vhost_net *net)
 	if (!sock || skb_queue_empty(&sock->sk->sk_receive_queue))
 		return;
 
-	use_mm(net->dev.mm);
 	mutex_lock(&vq->mutex);
 	vhost_disable_notify(vq);
 	hdr_size = vq->vhost_hlen;
@@ -391,7 +388,6 @@ static void handle_rx_big(struct vhost_net *net)
 	}
 
 	mutex_unlock(&vq->mutex);
-	unuse_mm(net->dev.mm);
 }
 
 /* Expects to be always run from workqueue - which acts as
@@ -423,7 +419,6 @@ static void handle_rx_mergeable(struct vhost_net *net)
 	if (!sock || skb_queue_empty(&sock->sk->sk_receive_queue))
 		return;
 
-	use_mm(net->dev.mm);
 	mutex_lock(&vq->mutex);
 	vhost_disable_notify(vq);
 	vhost_hlen = vq->vhost_hlen;
@@ -458,7 +453,7 @@ static void handle_rx_mergeable(struct vhost_net *net)
 			move_iovec_hdr(vq->iov, vq->hdr, vhost_hlen, in);
 		else
 			/* Copy the header for use in VIRTIO_NET_F_MRG_RXBUF:
-			 * needed because sendmsg can modify msg_iov. */
+			 * needed because recvmsg can modify msg_iov. */
 			copy_iovec_hdr(vq->iov, vq->hdr, sock_hlen, in);
 		msg.msg_iovlen = in;
 		err = sock->ops->recvmsg(NULL, sock, &msg,
@@ -500,7 +495,6 @@ static void handle_rx_mergeable(struct vhost_net *net)
 	}
 
 	mutex_unlock(&vq->mutex);
-	unuse_mm(net->dev.mm);
 }
 
 static void handle_rx(struct vhost_net *net)
diff --git a/drivers/vhost/test.c b/drivers/vhost/test.c
new file mode 100644
index 00000000000..099f30230d0
--- /dev/null
+++ b/drivers/vhost/test.c
@@ -0,0 +1,320 @@
+/* Copyright (C) 2009 Red Hat, Inc.
+ * Author: Michael S. Tsirkin <mst@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.
+ *
+ * test virtio server in host kernel.
+ */
+
+#include <linux/compat.h>
+#include <linux/eventfd.h>
+#include <linux/vhost.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/workqueue.h>
+#include <linux/rcupdate.h>
+#include <linux/file.h>
+#include <linux/slab.h>
+
+#include "test.h"
+#include "vhost.c"
+
+/* Max number of bytes transferred before requeueing the job.
+ * Using this limit prevents one virtqueue from starving others. */
+#define VHOST_TEST_WEIGHT 0x80000
+
+enum {
+	VHOST_TEST_VQ = 0,
+	VHOST_TEST_VQ_MAX = 1,
+};
+
+struct vhost_test {
+	struct vhost_dev dev;
+	struct vhost_virtqueue vqs[VHOST_TEST_VQ_MAX];
+};
+
+/* Expects to be always run from workqueue - which acts as
+ * read-size critical section for our kind of RCU. */
+static void handle_vq(struct vhost_test *n)
+{
+	struct vhost_virtqueue *vq = &n->dev.vqs[VHOST_TEST_VQ];
+	unsigned out, in;
+	int head;
+	size_t len, total_len = 0;
+	void *private;
+
+	private = rcu_dereference_check(vq->private_data, 1);
+	if (!private)
+		return;
+
+	mutex_lock(&vq->mutex);
+	vhost_disable_notify(vq);
+
+	for (;;) {
+		head = vhost_get_vq_desc(&n->dev, vq, vq->iov,
+					 ARRAY_SIZE(vq->iov),
+					 &out, &in,
+					 NULL, NULL);
+		/* On error, stop handling until the next kick. */
+		if (unlikely(head < 0))
+			break;
+		/* Nothing new?  Wait for eventfd to tell us they refilled. */
+		if (head == vq->num) {
+			if (unlikely(vhost_enable_notify(vq))) {
+				vhost_disable_notify(vq);
+				continue;
+			}
+			break;
+		}
+		if (in) {
+			vq_err(vq, "Unexpected descriptor format for TX: "
+			       "out %d, int %d\n", out, in);
+			break;
+		}
+		len = iov_length(vq->iov, out);
+		/* Sanity check */
+		if (!len) {
+			vq_err(vq, "Unexpected 0 len for TX\n");
+			break;
+		}
+		vhost_add_used_and_signal(&n->dev, vq, head, 0);
+		total_len += len;
+		if (unlikely(total_len >= VHOST_TEST_WEIGHT)) {
+			vhost_poll_queue(&vq->poll);
+			break;
+		}
+	}
+
+	mutex_unlock(&vq->mutex);
+}
+
+static void handle_vq_kick(struct vhost_work *work)
+{
+	struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
+						  poll.work);
+	struct vhost_test *n = container_of(vq->dev, struct vhost_test, dev);
+
+	handle_vq(n);
+}
+
+static int vhost_test_open(struct inode *inode, struct file *f)
+{
+	struct vhost_test *n = kmalloc(sizeof *n, GFP_KERNEL);
+	struct vhost_dev *dev;
+	int r;
+
+	if (!n)
+		return -ENOMEM;
+
+	dev = &n->dev;
+	n->vqs[VHOST_TEST_VQ].handle_kick = handle_vq_kick;
+	r = vhost_dev_init(dev, n->vqs, VHOST_TEST_VQ_MAX);
+	if (r < 0) {
+		kfree(n);
+		return r;
+	}
+
+	f->private_data = n;
+
+	return 0;
+}
+
+static void *vhost_test_stop_vq(struct vhost_test *n,
+				struct vhost_virtqueue *vq)
+{
+	void *private;
+
+	mutex_lock(&vq->mutex);
+	private = rcu_dereference_protected(vq->private_data,
+					 lockdep_is_held(&vq->mutex));
+	rcu_assign_pointer(vq->private_data, NULL);
+	mutex_unlock(&vq->mutex);
+	return private;
+}
+
+static void vhost_test_stop(struct vhost_test *n, void **privatep)
+{
+	*privatep = vhost_test_stop_vq(n, n->vqs + VHOST_TEST_VQ);
+}
+
+static void vhost_test_flush_vq(struct vhost_test *n, int index)
+{
+	vhost_poll_flush(&n->dev.vqs[index].poll);
+}
+
+static void vhost_test_flush(struct vhost_test *n)
+{
+	vhost_test_flush_vq(n, VHOST_TEST_VQ);
+}
+
+static int vhost_test_release(struct inode *inode, struct file *f)
+{
+	struct vhost_test *n = f->private_data;
+	void  *private;
+
+	vhost_test_stop(n, &private);
+	vhost_test_flush(n);
+	vhost_dev_cleanup(&n->dev);
+	/* We do an extra flush before freeing memory,
+	 * since jobs can re-queue themselves. */
+	vhost_test_flush(n);
+	kfree(n);
+	return 0;
+}
+
+static long vhost_test_run(struct vhost_test *n, int test)
+{
+	void *priv, *oldpriv;
+	struct vhost_virtqueue *vq;
+	int r, index;
+
+	if (test < 0 || test > 1)
+		return -EINVAL;
+
+	mutex_lock(&n->dev.mutex);
+	r = vhost_dev_check_owner(&n->dev);
+	if (r)
+		goto err;
+
+	for (index = 0; index < n->dev.nvqs; ++index) {
+		/* Verify that ring has been setup correctly. */
+		if (!vhost_vq_access_ok(&n->vqs[index])) {
+			r = -EFAULT;
+			goto err;
+		}
+	}
+
+	for (index = 0; index < n->dev.nvqs; ++index) {
+		vq = n->vqs + index;
+		mutex_lock(&vq->mutex);
+		priv = test ? n : NULL;
+
+		/* start polling new socket */
+		oldpriv = rcu_dereference_protected(vq->private_data,
+						    lockdep_is_held(&vq->mutex));
+		rcu_assign_pointer(vq->private_data, priv);
+
+		mutex_unlock(&vq->mutex);
+
+		if (oldpriv) {
+			vhost_test_flush_vq(n, index);
+		}
+	}
+
+	mutex_unlock(&n->dev.mutex);
+	return 0;
+
+err:
+	mutex_unlock(&n->dev.mutex);
+	return r;
+}
+
+static long vhost_test_reset_owner(struct vhost_test *n)
+{
+	void *priv = NULL;
+	long err;
+	mutex_lock(&n->dev.mutex);
+	err = vhost_dev_check_owner(&n->dev);
+	if (err)
+		goto done;
+	vhost_test_stop(n, &priv);
+	vhost_test_flush(n);
+	err = vhost_dev_reset_owner(&n->dev);
+done:
+	mutex_unlock(&n->dev.mutex);
+	return err;
+}
+
+static int vhost_test_set_features(struct vhost_test *n, u64 features)
+{
+	mutex_lock(&n->dev.mutex);
+	if ((features & (1 << VHOST_F_LOG_ALL)) &&
+	    !vhost_log_access_ok(&n->dev)) {
+		mutex_unlock(&n->dev.mutex);
+		return -EFAULT;
+	}
+	n->dev.acked_features = features;
+	smp_wmb();
+	vhost_test_flush(n);
+	mutex_unlock(&n->dev.mutex);
+	return 0;
+}
+
+static long vhost_test_ioctl(struct file *f, unsigned int ioctl,
+			     unsigned long arg)
+{
+	struct vhost_test *n = f->private_data;
+	void __user *argp = (void __user *)arg;
+	u64 __user *featurep = argp;
+	int test;
+	u64 features;
+	int r;
+	switch (ioctl) {
+	case VHOST_TEST_RUN:
+		if (copy_from_user(&test, argp, sizeof test))
+			return -EFAULT;
+		return vhost_test_run(n, test);
+	case VHOST_GET_FEATURES:
+		features = VHOST_FEATURES;
+		if (copy_to_user(featurep, &features, sizeof features))
+			return -EFAULT;
+		return 0;
+	case VHOST_SET_FEATURES:
+		if (copy_from_user(&features, featurep, sizeof features))
+			return -EFAULT;
+		if (features & ~VHOST_FEATURES)
+			return -EOPNOTSUPP;
+		return vhost_test_set_features(n, features);
+	case VHOST_RESET_OWNER:
+		return vhost_test_reset_owner(n);
+	default:
+		mutex_lock(&n->dev.mutex);
+		r = vhost_dev_ioctl(&n->dev, ioctl, arg);
+		vhost_test_flush(n);
+		mutex_unlock(&n->dev.mutex);
+		return r;
+	}
+}
+
+#ifdef CONFIG_COMPAT
+static long vhost_test_compat_ioctl(struct file *f, unsigned int ioctl,
+				   unsigned long arg)
+{
+	return vhost_test_ioctl(f, ioctl, (unsigned long)compat_ptr(arg));
+}
+#endif
+
+static const struct file_operations vhost_test_fops = {
+	.owner          = THIS_MODULE,
+	.release        = vhost_test_release,
+	.unlocked_ioctl = vhost_test_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl   = vhost_test_compat_ioctl,
+#endif
+	.open           = vhost_test_open,
+	.llseek		= noop_llseek,
+};
+
+static struct miscdevice vhost_test_misc = {
+	MISC_DYNAMIC_MINOR,
+	"vhost-test",
+	&vhost_test_fops,
+};
+
+static int vhost_test_init(void)
+{
+	return misc_register(&vhost_test_misc);
+}
+module_init(vhost_test_init);
+
+static void vhost_test_exit(void)
+{
+	misc_deregister(&vhost_test_misc);
+}
+module_exit(vhost_test_exit);
+
+MODULE_VERSION("0.0.1");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Michael S. Tsirkin");
+MODULE_DESCRIPTION("Host kernel side for virtio simulator");
diff --git a/drivers/vhost/test.h b/drivers/vhost/test.h
new file mode 100644
index 00000000000..1fef5df8215
--- /dev/null
+++ b/drivers/vhost/test.h
@@ -0,0 +1,7 @@
+#ifndef LINUX_VHOST_TEST_H
+#define LINUX_VHOST_TEST_H
+
+/* Start a given test on the virtio null device. 0 stops all tests. */
+#define VHOST_TEST_RUN _IOW(VHOST_VIRTIO, 0x31, int)
+
+#endif
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index 94701ff3a23..38244f59cdd 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -15,6 +15,7 @@
 #include <linux/vhost.h>
 #include <linux/virtio_net.h>
 #include <linux/mm.h>
+#include <linux/mmu_context.h>
 #include <linux/miscdevice.h>
 #include <linux/mutex.h>
 #include <linux/rcupdate.h>
@@ -29,8 +30,6 @@
 #include <linux/if_packet.h>
 #include <linux/if_arp.h>
 
-#include <net/sock.h>
-
 #include "vhost.h"
 
 enum {
@@ -157,7 +156,6 @@ static void vhost_vq_reset(struct vhost_dev *dev,
 	vq->avail_idx = 0;
 	vq->last_used_idx = 0;
 	vq->used_flags = 0;
-	vq->used_flags = 0;
 	vq->log_used = false;
 	vq->log_addr = -1ull;
 	vq->vhost_hlen = 0;
@@ -178,6 +176,8 @@ static int vhost_worker(void *data)
 	struct vhost_work *work = NULL;
 	unsigned uninitialized_var(seq);
 
+	use_mm(dev->mm);
+
 	for (;;) {
 		/* mb paired w/ kthread_stop */
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -192,7 +192,7 @@ static int vhost_worker(void *data)
 		if (kthread_should_stop()) {
 			spin_unlock_irq(&dev->work_lock);
 			__set_current_state(TASK_RUNNING);
-			return 0;
+			break;
 		}
 		if (!list_empty(&dev->work_list)) {
 			work = list_first_entry(&dev->work_list,
@@ -210,6 +210,8 @@ static int vhost_worker(void *data)
 			schedule();
 
 	}
+	unuse_mm(dev->mm);
+	return 0;
 }
 
 /* Helper to allocate iovec buffers for all vqs. */
@@ -402,15 +404,14 @@ void vhost_dev_cleanup(struct vhost_dev *dev)
 	kfree(rcu_dereference_protected(dev->memory,
 					lockdep_is_held(&dev->mutex)));
 	RCU_INIT_POINTER(dev->memory, NULL);
-	if (dev->mm)
-		mmput(dev->mm);
-	dev->mm = NULL;
-
 	WARN_ON(!list_empty(&dev->work_list));
 	if (dev->worker) {
 		kthread_stop(dev->worker);
 		dev->worker = NULL;
 	}
+	if (dev->mm)
+		mmput(dev->mm);
+	dev->mm = NULL;
 }
 
 static int log_access_ok(void __user *log_base, u64 addr, unsigned long sz)
@@ -881,14 +882,15 @@ static int set_bit_to_user(int nr, void __user *addr)
 static int log_write(void __user *log_base,
 		     u64 write_address, u64 write_length)
 {
+	u64 write_page = write_address / VHOST_PAGE_SIZE;
 	int r;
 	if (!write_length)
 		return 0;
-	write_address /= VHOST_PAGE_SIZE;
+	write_length += write_address % VHOST_PAGE_SIZE;
 	for (;;) {
 		u64 base = (u64)(unsigned long)log_base;
-		u64 log = base + write_address / 8;
-		int bit = write_address % 8;
+		u64 log = base + write_page / 8;
+		int bit = write_page % 8;
 		if ((u64)(unsigned long)log != log)
 			return -EFAULT;
 		r = set_bit_to_user(bit, (void __user *)(unsigned long)log);
@@ -897,7 +899,7 @@ static int log_write(void __user *log_base,
 		if (write_length <= VHOST_PAGE_SIZE)
 			break;
 		write_length -= VHOST_PAGE_SIZE;
-		write_address += VHOST_PAGE_SIZE;
+		write_page += 1;
 	}
 	return r;
 }
@@ -1092,7 +1094,7 @@ int vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
 
 	/* Check it isn't doing very strange things with descriptor numbers. */
 	last_avail_idx = vq->last_avail_idx;
-	if (unlikely(get_user(vq->avail_idx, &vq->avail->idx))) {
+	if (unlikely(__get_user(vq->avail_idx, &vq->avail->idx))) {
 		vq_err(vq, "Failed to access avail idx at %p\n",
 		       &vq->avail->idx);
 		return -EFAULT;
@@ -1113,8 +1115,8 @@ int vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
 
 	/* Grab the next descriptor number they're advertising, and increment
 	 * the index we've seen. */
-	if (unlikely(get_user(head,
-			      &vq->avail->ring[last_avail_idx % vq->num]))) {
+	if (unlikely(__get_user(head,
+				&vq->avail->ring[last_avail_idx % vq->num]))) {
 		vq_err(vq, "Failed to read head: idx %d address %p\n",
 		       last_avail_idx,
 		       &vq->avail->ring[last_avail_idx % vq->num]);
@@ -1213,17 +1215,17 @@ int vhost_add_used(struct vhost_virtqueue *vq, unsigned int head, int len)
 	/* The virtqueue contains a ring of used buffers.  Get a pointer to the
 	 * next entry in that used ring. */
 	used = &vq->used->ring[vq->last_used_idx % vq->num];
-	if (put_user(head, &used->id)) {
+	if (__put_user(head, &used->id)) {
 		vq_err(vq, "Failed to write used id");
 		return -EFAULT;
 	}
-	if (put_user(len, &used->len)) {
+	if (__put_user(len, &used->len)) {
 		vq_err(vq, "Failed to write used len");
 		return -EFAULT;
 	}
 	/* Make sure buffer is written before we update index. */
 	smp_wmb();
-	if (put_user(vq->last_used_idx + 1, &vq->used->idx)) {
+	if (__put_user(vq->last_used_idx + 1, &vq->used->idx)) {
 		vq_err(vq, "Failed to increment used idx");
 		return -EFAULT;
 	}
@@ -1255,7 +1257,7 @@ static int __vhost_add_used_n(struct vhost_virtqueue *vq,
 
 	start = vq->last_used_idx % vq->num;
 	used = vq->used->ring + start;
-	if (copy_to_user(used, heads, count * sizeof *used)) {
+	if (__copy_to_user(used, heads, count * sizeof *used)) {
 		vq_err(vq, "Failed to write used");
 		return -EFAULT;
 	}
@@ -1316,7 +1318,7 @@ void vhost_signal(struct vhost_dev *dev, struct vhost_virtqueue *vq)
 	 * interrupts. */
 	smp_mb();
 
-	if (get_user(flags, &vq->avail->flags)) {
+	if (__get_user(flags, &vq->avail->flags)) {
 		vq_err(vq, "Failed to get flags");
 		return;
 	}
@@ -1367,7 +1369,7 @@ bool vhost_enable_notify(struct vhost_virtqueue *vq)
 	/* They could have slipped one in as we were doing that: make
 	 * sure it's written, then check again. */
 	smp_mb();
-	r = get_user(avail_idx, &vq->avail->idx);
+	r = __get_user(avail_idx, &vq->avail->idx);
 	if (r) {
 		vq_err(vq, "Failed to check avail idx at %p: %d\n",
 		       &vq->avail->idx, r);
diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
index 073d06ae091..2af44b7b1f3 100644
--- a/drivers/vhost/vhost.h
+++ b/drivers/vhost/vhost.h
@@ -102,7 +102,7 @@ struct vhost_virtqueue {
 	 * flush the vhost_work instead of synchronize_rcu. Therefore readers do
 	 * not need to call rcu_read_lock/rcu_read_unlock: the beginning of
 	 * vhost_work execution acts instead of rcu_read_lock() and the end of
-	 * vhost_work execution acts instead of rcu_read_lock().
+	 * vhost_work execution acts instead of rcu_read_unlock().
 	 * Writers use virtqueue mutex. */
 	void __rcu *private_data;
 	/* Log write descriptors */
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 27c1fb4b1e0..55dc6fb6e90 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -186,6 +186,14 @@ config FB_SYS_FOPS
        depends on FB
        default n
 
+config FB_WMT_GE_ROPS
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include functions for accelerated rectangle filling and area
+	  copying using WonderMedia Graphics Engine operations.
+
 config FB_DEFERRED_IO
 	bool
 	depends on FB
@@ -635,6 +643,72 @@ config FB_BFIN_LQ035Q1
 	  To compile this driver as a module, choose M here: the
 	  module will be called bfin-lq035q1-fb.
 
+config FB_BF537_LQ035
+	tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
+	depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BFIN_GPTIMERS
+	help
+	  This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
+	  attached to a BF537.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bf537-lq035.
+
+config FB_BFIN_7393
+	tristate "Blackfin ADV7393 Video encoder"
+	depends on FB && BLACKFIN
+	select I2C
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for a ADV7393 video encoder
+	  attached to a Blackfin on the PPI port.
+	  If your Blackfin board has a ADV7393 select Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_adv7393fb.
+
+choice
+	prompt  "Video mode support"
+	depends on FB_BFIN_7393
+	default NTSC
+
+config NTSC
+	bool 'NTSC 720x480'
+
+config PAL
+	bool 'PAL 720x576'
+
+config NTSC_640x480
+	bool 'NTSC 640x480 (Experimental)'
+
+config PAL_640x480
+	bool 'PAL 640x480 (Experimental)'
+
+config NTSC_YCBCR
+	bool 'NTSC 720x480 YCbCR input'
+
+config PAL_YCBCR
+	bool 'PAL 720x576 YCbCR input'
+
+endchoice
+
+choice
+	prompt  "Size of ADV7393 frame buffer memory Single/Double Size"
+	depends on (FB_BFIN_7393)
+	default ADV7393_1XMEM
+
+config ADV7393_1XMEM
+	bool 'Single'
+
+config ADV7393_2XMEM
+	bool 'Double'
+endchoice
+
 config FB_STI
 	tristate "HP STI frame buffer device support"
 	depends on FB && PARISC
@@ -750,24 +824,14 @@ config FB_N411
 config FB_HGA
 	tristate "Hercules mono graphics support"
 	depends on FB && X86
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
 	help
 	  Say Y here if you have a Hercules mono graphics card.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called hgafb.
 
-	  As this card technology is 15 years old, most people will answer N
-	  here.
-
-config FB_HGA_ACCEL
-	bool "Hercules mono Acceleration functions (EXPERIMENTAL)"
-	depends on FB_HGA && EXPERIMENTAL
-	---help---
-	This will compile the Hercules mono graphics with
-	acceleration functions.
+	  As this card technology is at least 25 years old,
+	  most people will answer N here.
 
 config FB_SGIVW
 	tristate "SGI Visual Workstation framebuffer support"
@@ -1722,6 +1786,24 @@ config FB_AU1200
 	  various panels and CRTs by passing in kernel cmd line option
 	  au1200fb:panel=<name>.
 
+config FB_VT8500
+	bool "VT8500 LCD Driver"
+	depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_VT8500
+	select FB_WMT_GE_ROPS
+	select FB_SYS_IMAGEBLIT
+	help
+	  This is the framebuffer driver for VIA VT8500 integrated LCD
+	  controller.
+
+config FB_WM8505
+	bool "WM8505 frame buffer support"
+	depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_WM8505
+	select FB_WMT_GE_ROPS
+	select FB_SYS_IMAGEBLIT
+	help
+	  This is the framebuffer driver for WonderMedia WM8505
+	  integrated LCD controller.
+
 source "drivers/video/geode/Kconfig"
 
 config FB_HIT
@@ -1850,6 +1932,16 @@ config FB_PXA_PARAMETERS
 
 	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
 
+config PXA3XX_GCU
+	tristate "PXA3xx 2D graphics accelerator driver"
+	depends on FB_PXA
+	help
+	  Kernelspace driver for the 2D graphics controller unit (GCU)
+	  found on PXA3xx processors. There is a counterpart driver in the
+	  DirectFB suite, see http://www.directfb.org/
+
+	  If you compile this as a module, it will be called pxa3xx_gcu.
+
 config FB_MBX
 	tristate "2700G LCD framebuffer support"
 	depends on FB && ARCH_PXA
@@ -2034,6 +2126,20 @@ config FB_SM501
 
 	  If unsure, say N.
 
+config FB_UDL
+	tristate "Displaylink USB Framebuffer support"
+	depends on FB && USB
+	select FB_MODE_HELPERS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	---help---
+	  This is a kernel framebuffer driver for DisplayLink USB devices.
+	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
+	  To compile as a module, choose M here: the module name is udlfb.
 
 config FB_PNX4008_DUM
 	tristate "Display Update Module support on Philips PNX4008 board"
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 485e8ed1318..8c8fabdff9d 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_FB_SVGALIB)       += svgalib.o
 obj-$(CONFIG_FB_MACMODES)      += macmodes.o
 obj-$(CONFIG_FB_DDC)           += fb_ddc.o
 obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
+obj-$(CONFIG_FB_WMT_GE_ROPS)   += wmt_ge_rops.o
 
 # Hardware specific drivers go first
 obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o
@@ -100,10 +101,13 @@ obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
 obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
 obj-$(CONFIG_FB_PXA)		  += pxafb.o
 obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
+obj-$(CONFIG_PXA3XX_GCU)	  += pxa3xx-gcu.o
 obj-$(CONFIG_FB_W100)		  += w100fb.o
 obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
 obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
 obj-$(CONFIG_FB_AU1200)		  += au1200fb.o
+obj-$(CONFIG_FB_VT8500)		  += vt8500lcdfb.o
+obj-$(CONFIG_FB_WM8505)		  += wm8505fb.o
 obj-$(CONFIG_FB_PMAG_AA)	  += pmag-aa-fb.o
 obj-$(CONFIG_FB_PMAG_BA)	  += pmag-ba-fb.o
 obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
@@ -122,6 +126,7 @@ obj-$(CONFIG_FB_PNX4008_DUM_RGB)  += pnx4008/
 obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
 obj-$(CONFIG_FB_PS3)		  += ps3fb.o
 obj-$(CONFIG_FB_SM501)            += sm501fb.o
+obj-$(CONFIG_FB_UDL)		  += udlfb.o
 obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
 obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
 obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
@@ -141,9 +146,11 @@ obj-$(CONFIG_FB_VESA)             += vesafb.o
 obj-$(CONFIG_FB_EFI)              += efifb.o
 obj-$(CONFIG_FB_VGA16)            += vga16fb.o
 obj-$(CONFIG_FB_OF)               += offb.o
+obj-$(CONFIG_FB_BF537_LQ035)      += bf537-lq035.o
 obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
 obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
 obj-$(CONFIG_FB_MX3)		  += mx3fb.o
 obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
 
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index 5bf91236c70..5a3ce3ad1ec 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -2969,10 +2969,8 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
 {
 	struct atyfb_par *par = info->par;
 	struct device_node *dp;
-	char prop[128];
-	phandle node;
-	int len, i, j, ret;
 	u32 mem, chip_id;
+	int i, j, ret;
 
 	/*
 	 * Map memory-mapped registers.
@@ -3088,23 +3086,8 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
 		aty_st_le32(MEM_CNTL, mem, par);
 	}
 
-	/*
-	 * If this is the console device, we will set default video
-	 * settings to what the PROM left us with.
-	 */
-	node = prom_getchild(prom_root_node);
-	node = prom_searchsiblings(node, "aliases");
-	if (node) {
-		len = prom_getproperty(node, "screen", prop, sizeof(prop));
-		if (len > 0) {
-			prop[len] = '\0';
-			node = prom_finddevice(prop);
-		} else
-			node = 0;
-	}
-
 	dp = pci_device_to_OF_node(pdev);
-	if (node == dp->phandle) {
+	if (dp == of_console_device) {
 		struct fb_var_screeninfo *var = &default_var;
 		unsigned int N, P, Q, M, T, R;
 		u32 v_total, h_total;
@@ -3112,9 +3095,9 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
 		u8 pll_regs[16];
 		u8 clock_cntl;
 
-		crtc.vxres = prom_getintdefault(node, "width", 1024);
-		crtc.vyres = prom_getintdefault(node, "height", 768);
-		var->bits_per_pixel = prom_getintdefault(node, "depth", 8);
+		crtc.vxres = of_getintprop_default(dp, "width", 1024);
+		crtc.vyres = of_getintprop_default(dp, "height", 768);
+		var->bits_per_pixel = of_getintprop_default(dp, "depth", 8);
 		var->xoffset = var->yoffset = 0;
 		crtc.h_tot_disp = aty_ld_le32(CRTC_H_TOTAL_DISP, par);
 		crtc.h_sync_strt_wid = aty_ld_le32(CRTC_H_SYNC_STRT_WID, par);
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 3ec24609151..734c650a47c 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -502,8 +502,10 @@ static ssize_t adp8860_bl_l1_daylight_max_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t count)
 {
 	struct adp8860_bl *data = dev_get_drvdata(dev);
+	int ret = strict_strtoul(buf, 10, &data->cached_daylight_max);
+	if (ret)
+		return ret;
 
-	strict_strtoul(buf, 10, &data->cached_daylight_max);
 	return adp8860_store(dev, buf, count, ADP8860_BLMX1);
 }
 static DEVICE_ATTR(l1_daylight_max, 0664, adp8860_bl_l1_daylight_max_show,
@@ -614,7 +616,7 @@ static ssize_t adp8860_bl_ambient_light_zone_store(struct device *dev,
 	if (val == 0) {
 		/* Enable automatic ambient light sensing */
 		adp8860_set_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
-	} else if ((val > 0) && (val < 6)) {
+	} else if ((val > 0) && (val <= 3)) {
 		/* Disable automatic ambient light sensing */
 		adp8860_clr_bits(data->client, ADP8860_MDCR, CMP_AUTOEN);
 
@@ -622,7 +624,7 @@ static ssize_t adp8860_bl_ambient_light_zone_store(struct device *dev,
 		mutex_lock(&data->lock);
 		adp8860_read(data->client, ADP8860_CFGR, &reg_val);
 		reg_val &= ~(CFGR_BLV_MASK << CFGR_BLV_SHIFT);
-		reg_val |= val << CFGR_BLV_SHIFT;
+		reg_val |= (val - 1) << CFGR_BLV_SHIFT;
 		adp8860_write(data->client, ADP8860_CFGR, reg_val);
 		mutex_unlock(&data->lock);
 	}
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index e207810bba3..08703299ef6 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -197,12 +197,12 @@ static int backlight_suspend(struct device *dev, pm_message_t state)
 {
 	struct backlight_device *bd = to_backlight_device(dev);
 
-	if (bd->ops->options & BL_CORE_SUSPENDRESUME) {
-		mutex_lock(&bd->ops_lock);
+	mutex_lock(&bd->ops_lock);
+	if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) {
 		bd->props.state |= BL_CORE_SUSPENDED;
 		backlight_update_status(bd);
-		mutex_unlock(&bd->ops_lock);
 	}
+	mutex_unlock(&bd->ops_lock);
 
 	return 0;
 }
@@ -211,12 +211,12 @@ static int backlight_resume(struct device *dev)
 {
 	struct backlight_device *bd = to_backlight_device(dev);
 
-	if (bd->ops->options & BL_CORE_SUSPENDRESUME) {
-		mutex_lock(&bd->ops_lock);
+	mutex_lock(&bd->ops_lock);
+	if (bd->ops && bd->ops->options & BL_CORE_SUSPENDRESUME) {
 		bd->props.state &= ~BL_CORE_SUSPENDED;
 		backlight_update_status(bd);
-		mutex_unlock(&bd->ops_lock);
 	}
+	mutex_unlock(&bd->ops_lock);
 
 	return 0;
 }
diff --git a/drivers/video/backlight/cr_bllcd.c b/drivers/video/backlight/cr_bllcd.c
index a4f4546f0be..397d15eb1ea 100644
--- a/drivers/video/backlight/cr_bllcd.c
+++ b/drivers/video/backlight/cr_bllcd.c
@@ -242,6 +242,7 @@ static int cr_backlight_remove(struct platform_device *pdev)
 	backlight_device_unregister(crp->cr_backlight_device);
 	lcd_device_unregister(crp->cr_lcd_device);
 	pci_dev_put(lpc_dev);
+	kfree(crp);
 
 	return 0;
 }
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index 9093ef0fa86..c67801e57aa 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -78,7 +78,7 @@ static int l4f00242t03_lcd_power_set(struct lcd_device *ld, int power)
 	const u16 slpin = 0x10;
 	const u16 disoff = 0x28;
 
-	if (power) {
+	if (power <= FB_BLANK_NORMAL) {
 		if (priv->lcd_on)
 			return 0;
 
diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c
index abc43a0eb97..5d3cf33953a 100644
--- a/drivers/video/backlight/lms283gf05.c
+++ b/drivers/video/backlight/lms283gf05.c
@@ -129,7 +129,7 @@ static int lms283gf05_power_set(struct lcd_device *ld, int power)
 	struct spi_device *spi = st->spi;
 	struct lms283gf05_pdata *pdata = spi->dev.platform_data;
 
-	if (power) {
+	if (power <= FB_BLANK_NORMAL) {
 		if (pdata)
 			lms283gf05_reset(pdata->reset_gpio,
 					pdata->reset_inverted);
diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c
index 9fb533f6373..1485f7345f4 100644
--- a/drivers/video/backlight/mbp_nvidia_bl.c
+++ b/drivers/video/backlight/mbp_nvidia_bl.c
@@ -335,6 +335,24 @@ static const struct dmi_system_id __initdata mbp_device_table[] = {
 		},
 		.driver_data	= (void *)&nvidia_chipset_data,
 	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBookAir 3,1",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,1"),
+		},
+		.driver_data	= (void *)&nvidia_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBookAir 3,2",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir3,2"),
+		},
+		.driver_data	= (void *)&nvidia_chipset_data,
+	},
 	{ }
 };
 
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index 55044351889..21866ec6965 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -25,6 +25,7 @@ struct pwm_bl_data {
 	struct pwm_device	*pwm;
 	struct device		*dev;
 	unsigned int		period;
+	unsigned int		lth_brightness;
 	int			(*notify)(struct device *,
 					  int brightness);
 };
@@ -48,7 +49,9 @@ static int pwm_backlight_update_status(struct backlight_device *bl)
 		pwm_config(pb->pwm, 0, pb->period);
 		pwm_disable(pb->pwm);
 	} else {
-		pwm_config(pb->pwm, brightness * pb->period / max, pb->period);
+		brightness = pb->lth_brightness +
+			(brightness * (pb->period - pb->lth_brightness) / max);
+		pwm_config(pb->pwm, brightness, pb->period);
 		pwm_enable(pb->pwm);
 	}
 	return 0;
@@ -92,6 +95,8 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 
 	pb->period = data->pwm_period_ns;
 	pb->notify = data->notify;
+	pb->lth_brightness = data->lth_brightness *
+		(data->pwm_period_ns / data->max_brightness);
 	pb->dev = &pdev->dev;
 
 	pb->pwm = pwm_request(data->pwm_id, "backlight");
diff --git a/drivers/video/backlight/s6e63m0.c b/drivers/video/backlight/s6e63m0.c
index a3128c9cb7a..5927db0da99 100644
--- a/drivers/video/backlight/s6e63m0.c
+++ b/drivers/video/backlight/s6e63m0.c
@@ -729,10 +729,10 @@ static ssize_t s6e63m0_sysfs_show_gamma_table(struct device *dev,
 
 	return strlen(buf);
 }
-static DEVICE_ATTR(gamma_table, 0644,
+static DEVICE_ATTR(gamma_table, 0444,
 		s6e63m0_sysfs_show_gamma_table, NULL);
 
-static int __init s6e63m0_probe(struct spi_device *spi)
+static int __devinit s6e63m0_probe(struct spi_device *spi)
 {
 	int ret = 0;
 	struct s6e63m0 *lcd = NULL;
@@ -829,6 +829,9 @@ static int __devexit s6e63m0_remove(struct spi_device *spi)
 	struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
 
 	s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
+	device_remove_file(&spi->dev, &dev_attr_gamma_table);
+	device_remove_file(&spi->dev, &dev_attr_gamma_mode);
+	backlight_device_unregister(lcd->bd);
 	lcd_device_unregister(lcd->ld);
 	kfree(lcd);
 
diff --git a/drivers/video/bf537-lq035.c b/drivers/video/bf537-lq035.c
new file mode 100644
index 00000000000..18c507874ff
--- /dev/null
+++ b/drivers/video/bf537-lq035.c
@@ -0,0 +1,914 @@
+/*
+ * Analog Devices Blackfin(BF537 STAMP) + SHARP TFT LCD.
+ * http://docs.blackfin.uclinux.org/doku.php?id=hw:cards:tft-lcd
+ *
+ * Copyright 2006-2010 Analog Devices Inc.
+ * Licensed under the GPL-2.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/device.h>
+#include <linux/backlight.h>
+#include <linux/lcd.h>
+#include <linux/i2c.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/dpmc.h>
+#include <asm/dma.h>
+#include <asm/portmux.h>
+
+#define NO_BL 1
+
+#define MAX_BRIGHENESS	95
+#define MIN_BRIGHENESS	5
+#define NBR_PALETTE	256
+
+static const unsigned short ppi_pins[] = {
+	P_PPI0_CLK, P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+	P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+	P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+	P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15, 0
+};
+
+static unsigned char *fb_buffer;          /* RGB Buffer */
+static unsigned long *dma_desc_table;
+static int t_conf_done, lq035_open_cnt;
+static DEFINE_SPINLOCK(bfin_lq035_lock);
+
+static int landscape;
+module_param(landscape, int, 0);
+MODULE_PARM_DESC(landscape,
+	"LANDSCAPE use 320x240 instead of Native 240x320 Resolution");
+
+static int bgr;
+module_param(bgr, int, 0);
+MODULE_PARM_DESC(bgr,
+	"BGR use 16-bit BGR-565 instead of RGB-565");
+
+static int nocursor = 1;
+module_param(nocursor, int, 0644);
+MODULE_PARM_DESC(nocursor, "cursor enable/disable");
+
+static unsigned long current_brightness;  /* backlight */
+
+/* AD5280 vcomm */
+static unsigned char vcomm_value = 150;
+static struct i2c_client *ad5280_client;
+
+static void set_vcomm(void)
+{
+	int nr;
+
+	if (!ad5280_client)
+		return;
+
+	nr = i2c_smbus_write_byte_data(ad5280_client, 0x00, vcomm_value);
+	if (nr)
+		pr_err("i2c_smbus_write_byte_data fail: %d\n", nr);
+}
+
+static int __devinit ad5280_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	int ret;
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+		return -EIO;
+	}
+
+	ret = i2c_smbus_write_byte_data(client, 0x00, vcomm_value);
+	if (ret) {
+		dev_err(&client->dev, "write fail: %d\n", ret);
+		return ret;
+	}
+
+	ad5280_client = client;
+
+	return 0;
+}
+
+static int __devexit ad5280_remove(struct i2c_client *client)
+{
+	ad5280_client = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id ad5280_id[] = {
+	{"bf537-lq035-ad5280", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, ad5280_id);
+
+static struct i2c_driver ad5280_driver = {
+	.driver = {
+		.name = "bf537-lq035-ad5280",
+	},
+	.probe = ad5280_probe,
+	.remove = __devexit_p(ad5280_remove),
+	.id_table = ad5280_id,
+};
+
+#ifdef CONFIG_PNAV10
+#define MOD GPIO_PH13
+
+#define bfin_write_TIMER_LP_CONFIG	bfin_write_TIMER0_CONFIG
+#define bfin_write_TIMER_LP_WIDTH	bfin_write_TIMER0_WIDTH
+#define bfin_write_TIMER_LP_PERIOD	bfin_write_TIMER0_PERIOD
+#define bfin_read_TIMER_LP_COUNTER	bfin_read_TIMER0_COUNTER
+#define TIMDIS_LP			TIMDIS0
+#define TIMEN_LP			TIMEN0
+
+#define bfin_write_TIMER_SPS_CONFIG	bfin_write_TIMER1_CONFIG
+#define bfin_write_TIMER_SPS_WIDTH	bfin_write_TIMER1_WIDTH
+#define bfin_write_TIMER_SPS_PERIOD	bfin_write_TIMER1_PERIOD
+#define TIMDIS_SPS			TIMDIS1
+#define TIMEN_SPS			TIMEN1
+
+#define bfin_write_TIMER_SP_CONFIG	bfin_write_TIMER5_CONFIG
+#define bfin_write_TIMER_SP_WIDTH	bfin_write_TIMER5_WIDTH
+#define bfin_write_TIMER_SP_PERIOD	bfin_write_TIMER5_PERIOD
+#define TIMDIS_SP			TIMDIS5
+#define TIMEN_SP			TIMEN5
+
+#define bfin_write_TIMER_PS_CLS_CONFIG	bfin_write_TIMER2_CONFIG
+#define bfin_write_TIMER_PS_CLS_WIDTH	bfin_write_TIMER2_WIDTH
+#define bfin_write_TIMER_PS_CLS_PERIOD	bfin_write_TIMER2_PERIOD
+#define TIMDIS_PS_CLS			TIMDIS2
+#define TIMEN_PS_CLS			TIMEN2
+
+#define bfin_write_TIMER_REV_CONFIG	bfin_write_TIMER3_CONFIG
+#define bfin_write_TIMER_REV_WIDTH	bfin_write_TIMER3_WIDTH
+#define bfin_write_TIMER_REV_PERIOD	bfin_write_TIMER3_PERIOD
+#define TIMDIS_REV			TIMDIS3
+#define TIMEN_REV			TIMEN3
+#define bfin_read_TIMER_REV_COUNTER	bfin_read_TIMER3_COUNTER
+
+#define	FREQ_PPI_CLK         (5*1024*1024)  /* PPI_CLK 5MHz */
+
+#define TIMERS {P_TMR0, P_TMR1, P_TMR2, P_TMR3, P_TMR5, 0}
+
+#else
+
+#define UD      GPIO_PF13	/* Up / Down */
+#define MOD     GPIO_PF10
+#define LBR     GPIO_PF14	/* Left Right */
+
+#define bfin_write_TIMER_LP_CONFIG	bfin_write_TIMER6_CONFIG
+#define bfin_write_TIMER_LP_WIDTH	bfin_write_TIMER6_WIDTH
+#define bfin_write_TIMER_LP_PERIOD	bfin_write_TIMER6_PERIOD
+#define bfin_read_TIMER_LP_COUNTER	bfin_read_TIMER6_COUNTER
+#define TIMDIS_LP			TIMDIS6
+#define TIMEN_LP			TIMEN6
+
+#define bfin_write_TIMER_SPS_CONFIG	bfin_write_TIMER1_CONFIG
+#define bfin_write_TIMER_SPS_WIDTH	bfin_write_TIMER1_WIDTH
+#define bfin_write_TIMER_SPS_PERIOD	bfin_write_TIMER1_PERIOD
+#define TIMDIS_SPS			TIMDIS1
+#define TIMEN_SPS			TIMEN1
+
+#define bfin_write_TIMER_SP_CONFIG	bfin_write_TIMER0_CONFIG
+#define bfin_write_TIMER_SP_WIDTH	bfin_write_TIMER0_WIDTH
+#define bfin_write_TIMER_SP_PERIOD	bfin_write_TIMER0_PERIOD
+#define TIMDIS_SP			TIMDIS0
+#define TIMEN_SP			TIMEN0
+
+#define bfin_write_TIMER_PS_CLS_CONFIG	bfin_write_TIMER7_CONFIG
+#define bfin_write_TIMER_PS_CLS_WIDTH	bfin_write_TIMER7_WIDTH
+#define bfin_write_TIMER_PS_CLS_PERIOD	bfin_write_TIMER7_PERIOD
+#define TIMDIS_PS_CLS			TIMDIS7
+#define TIMEN_PS_CLS			TIMEN7
+
+#define bfin_write_TIMER_REV_CONFIG	bfin_write_TIMER5_CONFIG
+#define bfin_write_TIMER_REV_WIDTH	bfin_write_TIMER5_WIDTH
+#define bfin_write_TIMER_REV_PERIOD	bfin_write_TIMER5_PERIOD
+#define TIMDIS_REV			TIMDIS5
+#define TIMEN_REV			TIMEN5
+#define bfin_read_TIMER_REV_COUNTER	bfin_read_TIMER5_COUNTER
+
+#define	FREQ_PPI_CLK         (6*1000*1000)  /* PPI_CLK 6MHz */
+#define TIMERS {P_TMR0, P_TMR1, P_TMR5, P_TMR6, P_TMR7, 0}
+
+#endif
+
+#define LCD_X_RES			240 /* Horizontal Resolution */
+#define LCD_Y_RES			320 /* Vertical Resolution */
+
+#define LCD_BBP				16  /* Bit Per Pixel */
+
+/* the LCD and the DMA start counting differently;
+ * since one starts at 0 and the other starts at 1,
+ * we have a difference of 1 between START_LINES
+ * and U_LINES.
+ */
+#define START_LINES       8   /* lines for field flyback or field blanking signal */
+#define U_LINES           9   /* number of undisplayed blanking lines */
+
+#define FRAMES_PER_SEC    (60)
+
+#define DCLKS_PER_FRAME   (FREQ_PPI_CLK/FRAMES_PER_SEC)
+#define DCLKS_PER_LINE    (DCLKS_PER_FRAME/(LCD_Y_RES+U_LINES))
+
+#define PPI_CONFIG_VALUE  (PORT_DIR|XFR_TYPE|DLEN_16|POLS)
+#define PPI_DELAY_VALUE   (0)
+#define TIMER_CONFIG      (PWM_OUT|PERIOD_CNT|TIN_SEL|CLK_SEL)
+
+#define ACTIVE_VIDEO_MEM_OFFSET	(LCD_X_RES*START_LINES*(LCD_BBP/8))
+#define ACTIVE_VIDEO_MEM_SIZE	(LCD_Y_RES*LCD_X_RES*(LCD_BBP/8))
+#define TOTAL_VIDEO_MEM_SIZE	((LCD_Y_RES+U_LINES)*LCD_X_RES*(LCD_BBP/8))
+#define TOTAL_DMA_DESC_SIZE	(2 * sizeof(u32) * (LCD_Y_RES + U_LINES))
+
+static void start_timers(void) /* CHECK with HW */
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	bfin_write_TIMER_ENABLE(TIMEN_REV);
+	SSYNC();
+
+	while (bfin_read_TIMER_REV_COUNTER() <= 11)
+		continue;
+	bfin_write_TIMER_ENABLE(TIMEN_LP);
+	SSYNC();
+
+	while (bfin_read_TIMER_LP_COUNTER() < 3)
+		continue;
+	bfin_write_TIMER_ENABLE(TIMEN_SP|TIMEN_SPS|TIMEN_PS_CLS);
+	SSYNC();
+	t_conf_done = 1;
+	local_irq_restore(flags);
+}
+
+static void config_timers(void)
+{
+	/* Stop timers */
+	bfin_write_TIMER_DISABLE(TIMDIS_SP|TIMDIS_SPS|TIMDIS_REV|
+				 TIMDIS_LP|TIMDIS_PS_CLS);
+	SSYNC();
+
+	/* LP, timer 6 */
+	bfin_write_TIMER_LP_CONFIG(TIMER_CONFIG|PULSE_HI);
+	bfin_write_TIMER_LP_WIDTH(1);
+
+	bfin_write_TIMER_LP_PERIOD(DCLKS_PER_LINE);
+	SSYNC();
+
+	/* SPS, timer 1 */
+	bfin_write_TIMER_SPS_CONFIG(TIMER_CONFIG|PULSE_HI);
+	bfin_write_TIMER_SPS_WIDTH(DCLKS_PER_LINE*2);
+	bfin_write_TIMER_SPS_PERIOD((DCLKS_PER_LINE * (LCD_Y_RES+U_LINES)));
+	SSYNC();
+
+	/* SP, timer 0 */
+	bfin_write_TIMER_SP_CONFIG(TIMER_CONFIG|PULSE_HI);
+	bfin_write_TIMER_SP_WIDTH(1);
+	bfin_write_TIMER_SP_PERIOD(DCLKS_PER_LINE);
+	SSYNC();
+
+	/* PS & CLS, timer 7 */
+	bfin_write_TIMER_PS_CLS_CONFIG(TIMER_CONFIG);
+	bfin_write_TIMER_PS_CLS_WIDTH(LCD_X_RES + START_LINES);
+	bfin_write_TIMER_PS_CLS_PERIOD(DCLKS_PER_LINE);
+
+	SSYNC();
+
+#ifdef NO_BL
+	/* REV, timer 5 */
+	bfin_write_TIMER_REV_CONFIG(TIMER_CONFIG|PULSE_HI);
+
+	bfin_write_TIMER_REV_WIDTH(DCLKS_PER_LINE);
+	bfin_write_TIMER_REV_PERIOD(DCLKS_PER_LINE*2);
+
+	SSYNC();
+#endif
+}
+
+static void config_ppi(void)
+{
+	bfin_write_PPI_DELAY(PPI_DELAY_VALUE);
+	bfin_write_PPI_COUNT(LCD_X_RES-1);
+	/* 0x10 -> PORT_CFG -> 2 or 3 frame syncs */
+	bfin_write_PPI_CONTROL((PPI_CONFIG_VALUE|0x10) & (~POLS));
+}
+
+static int config_dma(void)
+{
+	u32 i;
+
+	if (landscape) {
+
+		for (i = 0; i < U_LINES; ++i) {
+			/* blanking lines point to first line of fb_buffer */
+			dma_desc_table[2*i] = (unsigned long)&dma_desc_table[2*i+2];
+			dma_desc_table[2*i+1] = (unsigned long)fb_buffer;
+		}
+
+		for (i = U_LINES; i < U_LINES + LCD_Y_RES; ++i) {
+			/* visible lines */
+			dma_desc_table[2*i] = (unsigned long)&dma_desc_table[2*i+2];
+			dma_desc_table[2*i+1] = (unsigned long)fb_buffer +
+						(LCD_Y_RES+U_LINES-1-i)*2;
+		}
+
+		/* last descriptor points to first */
+		dma_desc_table[2*(LCD_Y_RES+U_LINES-1)] = (unsigned long)&dma_desc_table[0];
+
+		set_dma_x_count(CH_PPI, LCD_X_RES);
+		set_dma_x_modify(CH_PPI, LCD_Y_RES * (LCD_BBP / 8));
+		set_dma_y_count(CH_PPI, 0);
+		set_dma_y_modify(CH_PPI, 0);
+		set_dma_next_desc_addr(CH_PPI, (void *)dma_desc_table[0]);
+		set_dma_config(CH_PPI, DMAFLOW_LARGE | NDSIZE_4 | WDSIZE_16);
+
+	} else {
+
+		set_dma_config(CH_PPI, set_bfin_dma_config(DIR_READ,
+				DMA_FLOW_AUTO,
+				INTR_DISABLE,
+				DIMENSION_2D,
+				DATA_SIZE_16,
+				DMA_NOSYNC_KEEP_DMA_BUF));
+		set_dma_x_count(CH_PPI, LCD_X_RES);
+		set_dma_x_modify(CH_PPI, LCD_BBP / 8);
+		set_dma_y_count(CH_PPI, LCD_Y_RES+U_LINES);
+		set_dma_y_modify(CH_PPI, LCD_BBP / 8);
+		set_dma_start_addr(CH_PPI, (unsigned long) fb_buffer);
+	}
+
+	return 0;
+}
+
+static int __devinit request_ports(void)
+{
+	u16 tmr_req[] = TIMERS;
+
+	/*
+		UD:      PF13
+		MOD:     PF10
+		LBR:     PF14
+		PPI_CLK: PF15
+	*/
+
+	if (peripheral_request_list(ppi_pins, KBUILD_MODNAME)) {
+		pr_err("requesting PPI peripheral failed\n");
+		return -EBUSY;
+	}
+
+	if (peripheral_request_list(tmr_req, KBUILD_MODNAME)) {
+		peripheral_free_list(ppi_pins);
+		pr_err("requesting timer peripheral failed\n");
+		return -EBUSY;
+	}
+
+#if (defined(UD) && defined(LBR))
+	if (gpio_request(UD, KBUILD_MODNAME)) {
+		pr_err("requesting GPIO %d failed\n", UD);
+		return -EBUSY;
+	}
+
+	if (gpio_request(LBR, KBUILD_MODNAME)) {
+		pr_err("requesting GPIO %d failed\n", LBR);
+		gpio_free(UD);
+		return -EBUSY;
+	}
+
+	gpio_direction_output(UD, 0);
+	gpio_direction_output(LBR, 1);
+
+#endif
+
+	if (gpio_request(MOD, KBUILD_MODNAME)) {
+		pr_err("requesting GPIO %d failed\n", MOD);
+#if (defined(UD) && defined(LBR))
+		gpio_free(LBR);
+		gpio_free(UD);
+#endif
+		return -EBUSY;
+	}
+
+	gpio_direction_output(MOD, 1);
+
+	SSYNC();
+	return 0;
+}
+
+static void free_ports(void)
+{
+	u16 tmr_req[] = TIMERS;
+
+	peripheral_free_list(ppi_pins);
+	peripheral_free_list(tmr_req);
+
+#if defined(UD) && defined(LBR)
+	gpio_free(LBR);
+	gpio_free(UD);
+#endif
+	gpio_free(MOD);
+}
+
+static struct fb_info bfin_lq035_fb;
+
+static struct fb_var_screeninfo bfin_lq035_fb_defined = {
+	.bits_per_pixel		= LCD_BBP,
+	.activate		= FB_ACTIVATE_TEST,
+	.xres			= LCD_X_RES,	/*default portrait mode RGB*/
+	.yres			= LCD_Y_RES,
+	.xres_virtual		= LCD_X_RES,
+	.yres_virtual		= LCD_Y_RES,
+	.height			= -1,
+	.width			= -1,
+	.left_margin		= 0,
+	.right_margin		= 0,
+	.upper_margin		= 0,
+	.lower_margin		= 0,
+	.red			= {11, 5, 0},
+	.green			= {5, 6, 0},
+	.blue			= {0, 5, 0},
+	.transp		= {0, 0, 0},
+};
+
+static struct fb_fix_screeninfo bfin_lq035_fb_fix __devinitdata = {
+	.id		= KBUILD_MODNAME,
+	.smem_len	= ACTIVE_VIDEO_MEM_SIZE,
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_TRUECOLOR,
+	.xpanstep	= 0,
+	.ypanstep	= 0,
+	.line_length	= LCD_X_RES*(LCD_BBP/8),
+	.accel		= FB_ACCEL_NONE,
+};
+
+
+static int bfin_lq035_fb_open(struct fb_info *info, int user)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&bfin_lq035_lock, flags);
+	lq035_open_cnt++;
+	spin_unlock_irqrestore(&bfin_lq035_lock, flags);
+
+	if (lq035_open_cnt <= 1) {
+		bfin_write_PPI_CONTROL(0);
+		SSYNC();
+
+		set_vcomm();
+		config_dma();
+		config_ppi();
+
+		/* start dma */
+		enable_dma(CH_PPI);
+		SSYNC();
+		bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
+		SSYNC();
+
+		if (!t_conf_done) {
+			config_timers();
+			start_timers();
+		}
+		/* gpio_set_value(MOD,1); */
+	}
+
+	return 0;
+}
+
+static int bfin_lq035_fb_release(struct fb_info *info, int user)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&bfin_lq035_lock, flags);
+	lq035_open_cnt--;
+	spin_unlock_irqrestore(&bfin_lq035_lock, flags);
+
+
+	if (lq035_open_cnt <= 0) {
+
+		bfin_write_PPI_CONTROL(0);
+		SSYNC();
+
+		disable_dma(CH_PPI);
+	}
+
+	return 0;
+}
+
+
+static int bfin_lq035_fb_check_var(struct fb_var_screeninfo *var,
+				   struct fb_info *info)
+{
+	switch (var->bits_per_pixel) {
+	case 16:/* DIRECTCOLOUR, 64k */
+		var->red.offset = info->var.red.offset;
+		var->green.offset = info->var.green.offset;
+		var->blue.offset = info->var.blue.offset;
+		var->red.length = info->var.red.length;
+		var->green.length = info->var.green.length;
+		var->blue.length = info->var.blue.length;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		var->transp.msb_right = 0;
+		var->red.msb_right = 0;
+		var->green.msb_right = 0;
+		var->blue.msb_right = 0;
+		break;
+	default:
+		pr_debug("%s: depth not supported: %u BPP\n", __func__,
+			 var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	if (info->var.xres != var->xres ||
+	    info->var.yres != var->yres ||
+	    info->var.xres_virtual != var->xres_virtual ||
+	    info->var.yres_virtual != var->yres_virtual) {
+		pr_debug("%s: Resolution not supported: X%u x Y%u\n",
+			 __func__, var->xres, var->yres);
+		return -EINVAL;
+	}
+
+	/*
+	 *  Memory limit
+	 */
+
+	if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
+		pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
+			 __func__, var->yres_virtual);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+/* fb_rotate
+ * Rotate the display of this angle. This doesn't seems to be used by the core,
+ * but as our hardware supports it, so why not implementing it...
+ */
+static void bfin_lq035_fb_rotate(struct fb_info *fbi, int angle)
+{
+	pr_debug("%s: %p %d", __func__, fbi, angle);
+#if (defined(UD) && defined(LBR))
+	switch (angle) {
+
+	case 180:
+		gpio_set_value(LBR, 0);
+		gpio_set_value(UD, 1);
+		break;
+	default:
+		gpio_set_value(LBR, 1);
+		gpio_set_value(UD, 0);
+		break;
+	}
+#endif
+}
+
+static int bfin_lq035_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	if (nocursor)
+		return 0;
+	else
+		return -EINVAL;	/* just to force soft_cursor() call */
+}
+
+static int bfin_lq035_fb_setcolreg(u_int regno, u_int red, u_int green,
+				   u_int blue, u_int transp,
+				   struct fb_info *info)
+{
+	if (regno >= NBR_PALETTE)
+		return -EINVAL;
+
+	if (info->var.grayscale)
+		/* grayscale = 0.30*R + 0.59*G + 0.11*B */
+		red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+
+		u32 value;
+		/* Place color in the pseudopalette */
+		if (regno > 16)
+			return -EINVAL;
+
+		red   >>= (16 - info->var.red.length);
+		green >>= (16 - info->var.green.length);
+		blue  >>= (16 - info->var.blue.length);
+
+		value = (red   << info->var.red.offset) |
+			(green << info->var.green.offset)|
+			(blue  << info->var.blue.offset);
+		value &= 0xFFFF;
+
+		((u32 *) (info->pseudo_palette))[regno] = value;
+
+	}
+
+	return 0;
+}
+
+static struct fb_ops bfin_lq035_fb_ops = {
+	.owner			= THIS_MODULE,
+	.fb_open		= bfin_lq035_fb_open,
+	.fb_release		= bfin_lq035_fb_release,
+	.fb_check_var		= bfin_lq035_fb_check_var,
+	.fb_rotate		= bfin_lq035_fb_rotate,
+	.fb_fillrect		= cfb_fillrect,
+	.fb_copyarea		= cfb_copyarea,
+	.fb_imageblit		= cfb_imageblit,
+	.fb_cursor		= bfin_lq035_fb_cursor,
+	.fb_setcolreg		= bfin_lq035_fb_setcolreg,
+};
+
+static int bl_get_brightness(struct backlight_device *bd)
+{
+	return current_brightness;
+}
+
+static const struct backlight_ops bfin_lq035fb_bl_ops = {
+	.get_brightness	= bl_get_brightness,
+};
+
+static struct backlight_device *bl_dev;
+
+static int bfin_lcd_get_power(struct lcd_device *dev)
+{
+	return 0;
+}
+
+static int bfin_lcd_set_power(struct lcd_device *dev, int power)
+{
+	return 0;
+}
+
+static int bfin_lcd_get_contrast(struct lcd_device *dev)
+{
+	return (int)vcomm_value;
+}
+
+static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast)
+{
+	if (contrast > 255)
+		contrast = 255;
+	if (contrast < 0)
+		contrast = 0;
+
+	vcomm_value = (unsigned char)contrast;
+	set_vcomm();
+	return 0;
+}
+
+static int bfin_lcd_check_fb(struct lcd_device *lcd, struct fb_info *fi)
+{
+	if (!fi || (fi == &bfin_lq035_fb))
+		return 1;
+	return 0;
+}
+
+static struct lcd_ops bfin_lcd_ops = {
+	.get_power	= bfin_lcd_get_power,
+	.set_power	= bfin_lcd_set_power,
+	.get_contrast	= bfin_lcd_get_contrast,
+	.set_contrast	= bfin_lcd_set_contrast,
+	.check_fb	= bfin_lcd_check_fb,
+};
+
+static struct lcd_device *lcd_dev;
+
+static int __devinit bfin_lq035_probe(struct platform_device *pdev)
+{
+	struct backlight_properties props;
+	dma_addr_t dma_handle;
+
+	if (request_dma(CH_PPI, KBUILD_MODNAME)) {
+		pr_err("couldn't request PPI DMA\n");
+		return -EFAULT;
+	}
+
+	if (request_ports()) {
+		pr_err("couldn't request gpio port\n");
+		free_dma(CH_PPI);
+		return -EFAULT;
+	}
+
+	fb_buffer = dma_alloc_coherent(NULL, TOTAL_VIDEO_MEM_SIZE,
+				       &dma_handle, GFP_KERNEL);
+	if (fb_buffer == NULL) {
+		pr_err("couldn't allocate dma buffer\n");
+		free_dma(CH_PPI);
+		free_ports();
+		return -ENOMEM;
+	}
+
+	if (L1_DATA_A_LENGTH)
+		dma_desc_table = l1_data_sram_zalloc(TOTAL_DMA_DESC_SIZE);
+	else
+		dma_desc_table = dma_alloc_coherent(NULL, TOTAL_DMA_DESC_SIZE,
+						    &dma_handle, 0);
+
+	if (dma_desc_table == NULL) {
+		pr_err("couldn't allocate dma descriptor\n");
+		free_dma(CH_PPI);
+		free_ports();
+		dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0);
+		return -ENOMEM;
+	}
+
+	bfin_lq035_fb.screen_base = (void *)fb_buffer;
+	bfin_lq035_fb_fix.smem_start = (int)fb_buffer;
+	if (landscape) {
+		bfin_lq035_fb_defined.xres = LCD_Y_RES;
+		bfin_lq035_fb_defined.yres = LCD_X_RES;
+		bfin_lq035_fb_defined.xres_virtual = LCD_Y_RES;
+		bfin_lq035_fb_defined.yres_virtual = LCD_X_RES;
+
+		bfin_lq035_fb_fix.line_length = LCD_Y_RES*(LCD_BBP/8);
+	} else {
+		bfin_lq035_fb.screen_base += ACTIVE_VIDEO_MEM_OFFSET;
+		bfin_lq035_fb_fix.smem_start += ACTIVE_VIDEO_MEM_OFFSET;
+	}
+
+	bfin_lq035_fb_defined.green.msb_right = 0;
+	bfin_lq035_fb_defined.red.msb_right   = 0;
+	bfin_lq035_fb_defined.blue.msb_right  = 0;
+	bfin_lq035_fb_defined.green.offset    = 5;
+	bfin_lq035_fb_defined.green.length    = 6;
+	bfin_lq035_fb_defined.red.length      = 5;
+	bfin_lq035_fb_defined.blue.length     = 5;
+
+	if (bgr) {
+		bfin_lq035_fb_defined.red.offset  = 0;
+		bfin_lq035_fb_defined.blue.offset = 11;
+	} else {
+		bfin_lq035_fb_defined.red.offset  = 11;
+		bfin_lq035_fb_defined.blue.offset = 0;
+	}
+
+	bfin_lq035_fb.fbops = &bfin_lq035_fb_ops;
+	bfin_lq035_fb.var = bfin_lq035_fb_defined;
+
+	bfin_lq035_fb.fix = bfin_lq035_fb_fix;
+	bfin_lq035_fb.flags = FBINFO_DEFAULT;
+
+
+	bfin_lq035_fb.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL);
+	if (bfin_lq035_fb.pseudo_palette == NULL) {
+		pr_err("failed to allocate pseudo_palette\n");
+		free_dma(CH_PPI);
+		free_ports();
+		dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0);
+		return -ENOMEM;
+	}
+
+	if (fb_alloc_cmap(&bfin_lq035_fb.cmap, NBR_PALETTE, 0) < 0) {
+		pr_err("failed to allocate colormap (%d entries)\n",
+			NBR_PALETTE);
+		free_dma(CH_PPI);
+		free_ports();
+		dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0);
+		kfree(bfin_lq035_fb.pseudo_palette);
+		return -EFAULT;
+	}
+
+	if (register_framebuffer(&bfin_lq035_fb) < 0) {
+		pr_err("unable to register framebuffer\n");
+		free_dma(CH_PPI);
+		free_ports();
+		dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0);
+		fb_buffer = NULL;
+		kfree(bfin_lq035_fb.pseudo_palette);
+		fb_dealloc_cmap(&bfin_lq035_fb.cmap);
+		return -EINVAL;
+	}
+
+	i2c_add_driver(&ad5280_driver);
+
+	memset(&props, 0, sizeof(props));
+	props.max_brightness = MAX_BRIGHENESS;
+	bl_dev = backlight_device_register("bf537-bl", NULL, NULL,
+					   &bfin_lq035fb_bl_ops, &props);
+
+	lcd_dev = lcd_device_register(KBUILD_MODNAME, &pdev->dev, NULL,
+				      &bfin_lcd_ops);
+	lcd_dev->props.max_contrast = 255,
+
+	pr_info("initialized");
+
+	return 0;
+}
+
+static int __devexit bfin_lq035_remove(struct platform_device *pdev)
+{
+	if (fb_buffer != NULL)
+		dma_free_coherent(NULL, TOTAL_VIDEO_MEM_SIZE, fb_buffer, 0);
+
+	if (L1_DATA_A_LENGTH)
+		l1_data_sram_free(dma_desc_table);
+	else
+		dma_free_coherent(NULL, TOTAL_DMA_DESC_SIZE, NULL, 0);
+
+	bfin_write_TIMER_DISABLE(TIMEN_SP|TIMEN_SPS|TIMEN_PS_CLS|
+				 TIMEN_LP|TIMEN_REV);
+	t_conf_done = 0;
+
+	free_dma(CH_PPI);
+
+
+	kfree(bfin_lq035_fb.pseudo_palette);
+	fb_dealloc_cmap(&bfin_lq035_fb.cmap);
+
+
+	lcd_device_unregister(lcd_dev);
+	backlight_device_unregister(bl_dev);
+
+	unregister_framebuffer(&bfin_lq035_fb);
+	i2c_del_driver(&ad5280_driver);
+
+	free_ports();
+
+	pr_info("unregistered LCD driver\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_lq035_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	if (lq035_open_cnt > 0) {
+		bfin_write_PPI_CONTROL(0);
+		SSYNC();
+		disable_dma(CH_PPI);
+	}
+
+	return 0;
+}
+
+static int bfin_lq035_resume(struct platform_device *pdev)
+{
+	if (lq035_open_cnt > 0) {
+		bfin_write_PPI_CONTROL(0);
+		SSYNC();
+
+		config_dma();
+		config_ppi();
+
+		enable_dma(CH_PPI);
+		bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
+		SSYNC();
+
+		config_timers();
+		start_timers();
+	} else {
+		t_conf_done = 0;
+	}
+
+	return 0;
+}
+#else
+# define bfin_lq035_suspend	NULL
+# define bfin_lq035_resume	NULL
+#endif
+
+static struct platform_driver bfin_lq035_driver = {
+	.probe = bfin_lq035_probe,
+	.remove = __devexit_p(bfin_lq035_remove),
+	.suspend = bfin_lq035_suspend,
+	.resume = bfin_lq035_resume,
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init bfin_lq035_driver_init(void)
+{
+	request_module("i2c-bfin-twi");
+	return platform_driver_register(&bfin_lq035_driver);
+}
+module_init(bfin_lq035_driver_init);
+
+static void __exit bfin_lq035_driver_cleanup(void)
+{
+	platform_driver_unregister(&bfin_lq035_driver);
+}
+module_exit(bfin_lq035_driver_cleanup);
+
+MODULE_DESCRIPTION("SHARP LQ035Q7DB03 TFT LCD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c
new file mode 100644
index 00000000000..8486f541156
--- /dev/null
+++ b/drivers/video/bfin_adv7393fb.c
@@ -0,0 +1,832 @@
+/*
+ * Frame buffer driver for ADV7393/2 video encoder
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or late.
+ */
+
+/*
+ * TODO: Remove Globals
+ * TODO: Code Cleanup
+ */
+
+#define pr_fmt(fmt) DRIVER_NAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
+#include <asm/portmux.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/proc_fs.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+
+#include "bfin_adv7393fb.h"
+
+static int mode = VMODE;
+static int mem = VMEM;
+static int nocursor = 1;
+
+static const unsigned short ppi_pins[] = {
+	P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+	P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+	P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+	P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+	P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+	0
+};
+
+/*
+ * card parameters
+ */
+
+static struct bfin_adv7393_fb_par {
+	/* structure holding blackfin / adv7393 paramters when
+	   screen is blanked */
+	struct {
+		u8 Mode;	/* ntsc/pal/? */
+	} vga_state;
+	atomic_t ref_count;
+} bfin_par;
+
+/* --------------------------------------------------------------------- */
+
+static struct fb_var_screeninfo bfin_adv7393_fb_defined = {
+	.xres = 720,
+	.yres = 480,
+	.xres_virtual = 720,
+	.yres_virtual = 480,
+	.bits_per_pixel = 16,
+	.activate = FB_ACTIVATE_TEST,
+	.height = -1,
+	.width = -1,
+	.left_margin = 0,
+	.right_margin = 0,
+	.upper_margin = 0,
+	.lower_margin = 0,
+	.vmode = FB_VMODE_INTERLACED,
+	.red = {11, 5, 0},
+	.green = {5, 6, 0},
+	.blue = {0, 5, 0},
+	.transp = {0, 0, 0},
+};
+
+static struct fb_fix_screeninfo bfin_adv7393_fb_fix __devinitdata = {
+	.id = "BFIN ADV7393",
+	.smem_len = 720 * 480 * 2,
+	.type = FB_TYPE_PACKED_PIXELS,
+	.visual = FB_VISUAL_TRUECOLOR,
+	.xpanstep = 0,
+	.ypanstep = 0,
+	.line_length = 720 * 2,
+	.accel = FB_ACCEL_NONE
+};
+
+static struct fb_ops bfin_adv7393_fb_ops = {
+	.owner = THIS_MODULE,
+	.fb_open = bfin_adv7393_fb_open,
+	.fb_release = bfin_adv7393_fb_release,
+	.fb_check_var = bfin_adv7393_fb_check_var,
+	.fb_pan_display = bfin_adv7393_fb_pan_display,
+	.fb_blank = bfin_adv7393_fb_blank,
+	.fb_fillrect = cfb_fillrect,
+	.fb_copyarea = cfb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_cursor = bfin_adv7393_fb_cursor,
+	.fb_setcolreg = bfin_adv7393_fb_setcolreg,
+};
+
+static int dma_desc_list(struct adv7393fb_device *fbdev, u16 arg)
+{
+	if (arg == BUILD) {	/* Build */
+		fbdev->vb1 = l1_data_sram_zalloc(sizeof(struct dmasg));
+		if (fbdev->vb1 == NULL)
+			goto error;
+
+		fbdev->av1 = l1_data_sram_zalloc(sizeof(struct dmasg));
+		if (fbdev->av1 == NULL)
+			goto error;
+
+		fbdev->vb2 = l1_data_sram_zalloc(sizeof(struct dmasg));
+		if (fbdev->vb2 == NULL)
+			goto error;
+
+		fbdev->av2 = l1_data_sram_zalloc(sizeof(struct dmasg));
+		if (fbdev->av2 == NULL)
+			goto error;
+
+		/* Build linked DMA descriptor list */
+		fbdev->vb1->next_desc_addr = fbdev->av1;
+		fbdev->av1->next_desc_addr = fbdev->vb2;
+		fbdev->vb2->next_desc_addr = fbdev->av2;
+		fbdev->av2->next_desc_addr = fbdev->vb1;
+
+		/* Save list head */
+		fbdev->descriptor_list_head = fbdev->av2;
+
+		/* Vertical Blanking Field 1 */
+		fbdev->vb1->start_addr = VB_DUMMY_MEMORY_SOURCE;
+		fbdev->vb1->cfg = DMA_CFG_VAL;
+
+		fbdev->vb1->x_count =
+		    fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
+
+		fbdev->vb1->x_modify = 0;
+		fbdev->vb1->y_count = fbdev->modes[mode].vb1_lines;
+		fbdev->vb1->y_modify = 0;
+
+		/* Active Video Field 1 */
+
+		fbdev->av1->start_addr = (unsigned long)fbdev->fb_mem;
+		fbdev->av1->cfg = DMA_CFG_VAL;
+		fbdev->av1->x_count =
+		    fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
+		fbdev->av1->x_modify = fbdev->modes[mode].bpp / 8;
+		fbdev->av1->y_count = fbdev->modes[mode].a_lines;
+		fbdev->av1->y_modify =
+		    (fbdev->modes[mode].xres - fbdev->modes[mode].boeft_blank +
+		     1) * (fbdev->modes[mode].bpp / 8);
+
+		/* Vertical Blanking Field 2 */
+
+		fbdev->vb2->start_addr = VB_DUMMY_MEMORY_SOURCE;
+		fbdev->vb2->cfg = DMA_CFG_VAL;
+		fbdev->vb2->x_count =
+		    fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
+
+		fbdev->vb2->x_modify = 0;
+		fbdev->vb2->y_count = fbdev->modes[mode].vb2_lines;
+		fbdev->vb2->y_modify = 0;
+
+		/* Active Video Field 2 */
+
+		fbdev->av2->start_addr =
+		    (unsigned long)fbdev->fb_mem + fbdev->line_len;
+
+		fbdev->av2->cfg = DMA_CFG_VAL;
+
+		fbdev->av2->x_count =
+		    fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
+
+		fbdev->av2->x_modify = (fbdev->modes[mode].bpp / 8);
+		fbdev->av2->y_count = fbdev->modes[mode].a_lines;
+
+		fbdev->av2->y_modify =
+		    (fbdev->modes[mode].xres - fbdev->modes[mode].boeft_blank +
+		     1) * (fbdev->modes[mode].bpp / 8);
+
+		return 1;
+	}
+
+error:
+	l1_data_sram_free(fbdev->vb1);
+	l1_data_sram_free(fbdev->av1);
+	l1_data_sram_free(fbdev->vb2);
+	l1_data_sram_free(fbdev->av2);
+
+	return 0;
+}
+
+static int bfin_config_dma(struct adv7393fb_device *fbdev)
+{
+	BUG_ON(!(fbdev->fb_mem));
+
+	set_dma_x_count(CH_PPI, fbdev->descriptor_list_head->x_count);
+	set_dma_x_modify(CH_PPI, fbdev->descriptor_list_head->x_modify);
+	set_dma_y_count(CH_PPI, fbdev->descriptor_list_head->y_count);
+	set_dma_y_modify(CH_PPI, fbdev->descriptor_list_head->y_modify);
+	set_dma_start_addr(CH_PPI, fbdev->descriptor_list_head->start_addr);
+	set_dma_next_desc_addr(CH_PPI,
+			       fbdev->descriptor_list_head->next_desc_addr);
+	set_dma_config(CH_PPI, fbdev->descriptor_list_head->cfg);
+
+	return 1;
+}
+
+static void bfin_disable_dma(void)
+{
+	bfin_write_DMA0_CONFIG(bfin_read_DMA0_CONFIG() & ~DMAEN);
+}
+
+static void bfin_config_ppi(struct adv7393fb_device *fbdev)
+{
+	if (ANOMALY_05000183) {
+		bfin_write_TIMER2_CONFIG(WDTH_CAP);
+		bfin_write_TIMER_ENABLE(TIMEN2);
+	}
+
+	bfin_write_PPI_CONTROL(0x381E);
+	bfin_write_PPI_FRAME(fbdev->modes[mode].tot_lines);
+	bfin_write_PPI_COUNT(fbdev->modes[mode].xres +
+			     fbdev->modes[mode].boeft_blank - 1);
+	bfin_write_PPI_DELAY(fbdev->modes[mode].aoeft_blank - 1);
+}
+
+static void bfin_enable_ppi(void)
+{
+	bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
+}
+
+static void bfin_disable_ppi(void)
+{
+	bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
+}
+
+static inline int adv7393_write(struct i2c_client *client, u8 reg, u8 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static inline int adv7393_read(struct i2c_client *client, u8 reg)
+{
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int
+adv7393_write_block(struct i2c_client *client,
+		    const u8 *data, unsigned int len)
+{
+	int ret = -1;
+	u8 reg;
+
+	while (len >= 2) {
+		reg = *data++;
+		ret = adv7393_write(client, reg, *data++);
+		if (ret < 0)
+			break;
+		len -= 2;
+	}
+
+	return ret;
+}
+
+static int adv7393_mode(struct i2c_client *client, u16 mode)
+{
+	switch (mode) {
+	case POWER_ON:		/* ADV7393 Sleep mode OFF */
+		adv7393_write(client, 0x00, 0x1E);
+		break;
+	case POWER_DOWN:	/* ADV7393 Sleep mode ON */
+		adv7393_write(client, 0x00, 0x1F);
+		break;
+	case BLANK_OFF:		/* Pixel Data Valid */
+		adv7393_write(client, 0x82, 0xCB);
+		break;
+	case BLANK_ON:		/* Pixel Data Invalid */
+		adv7393_write(client, 0x82, 0x8B);
+		break;
+	default:
+		return -EINVAL;
+		break;
+	}
+	return 0;
+}
+
+static irqreturn_t ppi_irq_error(int irq, void *dev_id)
+{
+
+	struct adv7393fb_device *fbdev = (struct adv7393fb_device *)dev_id;
+
+	u16 status = bfin_read_PPI_STATUS();
+
+	pr_debug("%s: PPI Status = 0x%X\n", __func__, status);
+
+	if (status) {
+		bfin_disable_dma();	/* TODO: Check Sequence */
+		bfin_disable_ppi();
+		bfin_clear_PPI_STATUS();
+		bfin_config_dma(fbdev);
+		bfin_enable_ppi();
+	}
+
+	return IRQ_HANDLED;
+
+}
+
+static int proc_output(char *buf)
+{
+	char *p = buf;
+
+	p += sprintf(p,
+		"Usage:\n"
+		"echo 0x[REG][Value] > adv7393\n"
+		"example: echo 0x1234 >adv7393\n"
+		"writes 0x34 into Register 0x12\n");
+
+	return p - buf;
+}
+
+static int
+adv7393_read_proc(char *page, char **start, off_t off,
+		  int count, int *eof, void *data)
+{
+	int len;
+
+	len = proc_output(page);
+	if (len <= off + count)
+		*eof = 1;
+	*start = page + off;
+	len -= off;
+	if (len > count)
+		len = count;
+	if (len < 0)
+		len = 0;
+	return len;
+}
+
+static int
+adv7393_write_proc(struct file *file, const char __user * buffer,
+		   unsigned long count, void *data)
+{
+	struct adv7393fb_device *fbdev = data;
+	char line[8];
+	unsigned int val;
+	int ret;
+
+	ret = copy_from_user(line, buffer, count);
+	if (ret)
+		return -EFAULT;
+
+	val = simple_strtoul(line, NULL, 0);
+	adv7393_write(fbdev->client, val >> 8, val & 0xff);
+
+	return count;
+}
+
+static int __devinit bfin_adv7393_fb_probe(struct i2c_client *client,
+					   const struct i2c_device_id *id)
+{
+	int ret = 0;
+	struct proc_dir_entry *entry;
+	int num_modes = ARRAY_SIZE(known_modes);
+
+	struct adv7393fb_device *fbdev = NULL;
+
+	if (mem > 2) {
+		dev_err(&client->dev, "mem out of allowed range [1;2]\n");
+		return -EINVAL;
+	}
+
+	if (mode > num_modes) {
+		dev_err(&client->dev, "mode %d: not supported", mode);
+		return -EFAULT;
+	}
+
+	fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
+	if (!fbdev) {
+		dev_err(&client->dev, "failed to allocate device private record");
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(client, fbdev);
+
+	fbdev->modes = known_modes;
+	fbdev->client = client;
+
+	fbdev->fb_len =
+	    mem * fbdev->modes[mode].xres * fbdev->modes[mode].xres *
+	    (fbdev->modes[mode].bpp / 8);
+
+	fbdev->line_len =
+	    fbdev->modes[mode].xres * (fbdev->modes[mode].bpp / 8);
+
+	/* Workaround "PPI Does Not Start Properly In Specific Mode" */
+	if (ANOMALY_05000400) {
+		if (gpio_request(P_IDENT(P_PPI0_FS3), "PPI0_FS3")) {
+			dev_err(&client->dev, "PPI0_FS3 GPIO request failed\n");
+			ret = -EBUSY;
+			goto out_8;
+		}
+		gpio_direction_output(P_IDENT(P_PPI0_FS3), 0);
+	}
+
+	if (peripheral_request_list(ppi_pins, DRIVER_NAME)) {
+		dev_err(&client->dev, "requesting PPI peripheral failed\n");
+		ret = -EFAULT;
+		goto out_8;
+	}
+
+	fbdev->fb_mem =
+	    dma_alloc_coherent(NULL, fbdev->fb_len, &fbdev->dma_handle,
+			       GFP_KERNEL);
+
+	if (NULL == fbdev->fb_mem) {
+		dev_err(&client->dev, "couldn't allocate dma buffer (%d bytes)\n",
+		       (u32) fbdev->fb_len);
+		ret = -ENOMEM;
+		goto out_7;
+	}
+
+	fbdev->info.screen_base = (void *)fbdev->fb_mem;
+	bfin_adv7393_fb_fix.smem_start = (int)fbdev->fb_mem;
+
+	bfin_adv7393_fb_fix.smem_len = fbdev->fb_len;
+	bfin_adv7393_fb_fix.line_length = fbdev->line_len;
+
+	if (mem > 1)
+		bfin_adv7393_fb_fix.ypanstep = 1;
+
+	bfin_adv7393_fb_defined.red.length = 5;
+	bfin_adv7393_fb_defined.green.length = 6;
+	bfin_adv7393_fb_defined.blue.length = 5;
+
+	bfin_adv7393_fb_defined.xres = fbdev->modes[mode].xres;
+	bfin_adv7393_fb_defined.yres = fbdev->modes[mode].yres;
+	bfin_adv7393_fb_defined.xres_virtual = fbdev->modes[mode].xres;
+	bfin_adv7393_fb_defined.yres_virtual = mem * fbdev->modes[mode].yres;
+	bfin_adv7393_fb_defined.bits_per_pixel = fbdev->modes[mode].bpp;
+
+	fbdev->info.fbops = &bfin_adv7393_fb_ops;
+	fbdev->info.var = bfin_adv7393_fb_defined;
+	fbdev->info.fix = bfin_adv7393_fb_fix;
+	fbdev->info.par = &bfin_par;
+	fbdev->info.flags = FBINFO_DEFAULT;
+
+	fbdev->info.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL);
+	if (!fbdev->info.pseudo_palette) {
+		dev_err(&client->dev, "failed to allocate pseudo_palette\n");
+		ret = -ENOMEM;
+		goto out_6;
+	}
+
+	if (fb_alloc_cmap(&fbdev->info.cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
+		dev_err(&client->dev, "failed to allocate colormap (%d entries)\n",
+			   BFIN_LCD_NBR_PALETTE_ENTRIES);
+		ret = -EFAULT;
+		goto out_5;
+	}
+
+	if (request_dma(CH_PPI, "BF5xx_PPI_DMA") < 0) {
+		dev_err(&client->dev, "unable to request PPI DMA\n");
+		ret = -EFAULT;
+		goto out_4;
+	}
+
+	if (request_irq(IRQ_PPI_ERROR, ppi_irq_error, IRQF_DISABLED,
+			"PPI ERROR", fbdev) < 0) {
+		dev_err(&client->dev, "unable to request PPI ERROR IRQ\n");
+		ret = -EFAULT;
+		goto out_3;
+	}
+
+	fbdev->open = 0;
+
+	ret = adv7393_write_block(client, fbdev->modes[mode].adv7393_i2c_initd,
+				fbdev->modes[mode].adv7393_i2c_initd_len);
+
+	if (ret) {
+		dev_err(&client->dev, "i2c attach: init error\n");
+		goto out_1;
+	}
+
+
+	if (register_framebuffer(&fbdev->info) < 0) {
+		dev_err(&client->dev, "unable to register framebuffer\n");
+		ret = -EFAULT;
+		goto out_1;
+	}
+
+	dev_info(&client->dev, "fb%d: %s frame buffer device\n",
+	       fbdev->info.node, fbdev->info.fix.id);
+	dev_info(&client->dev, "fb memory address : 0x%p\n", fbdev->fb_mem);
+
+	entry = create_proc_entry("driver/adv7393", 0, NULL);
+	if (!entry) {
+		dev_err(&client->dev, "unable to create /proc entry\n");
+		ret = -EFAULT;
+		goto out_0;
+	}
+
+	entry->read_proc = adv7393_read_proc;
+	entry->write_proc = adv7393_write_proc;
+	entry->data = fbdev;
+
+	return 0;
+
+ out_0:
+	unregister_framebuffer(&fbdev->info);
+ out_1:
+	free_irq(IRQ_PPI_ERROR, fbdev);
+ out_3:
+	free_dma(CH_PPI);
+ out_4:
+	dma_free_coherent(NULL, fbdev->fb_len, fbdev->fb_mem,
+			  fbdev->dma_handle);
+ out_5:
+	fb_dealloc_cmap(&fbdev->info.cmap);
+ out_6:
+	kfree(fbdev->info.pseudo_palette);
+ out_7:
+	peripheral_free_list(ppi_pins);
+ out_8:
+	kfree(fbdev);
+
+	return ret;
+}
+
+static int bfin_adv7393_fb_open(struct fb_info *info, int user)
+{
+	struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
+
+	fbdev->info.screen_base = (void *)fbdev->fb_mem;
+	if (!fbdev->info.screen_base) {
+		dev_err(&fbdev->client->dev, "unable to map device\n");
+		return -ENOMEM;
+	}
+
+	fbdev->open = 1;
+	dma_desc_list(fbdev, BUILD);
+	adv7393_mode(fbdev->client, BLANK_OFF);
+	bfin_config_ppi(fbdev);
+	bfin_config_dma(fbdev);
+	bfin_enable_ppi();
+
+	return 0;
+}
+
+static int bfin_adv7393_fb_release(struct fb_info *info, int user)
+{
+	struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
+
+	adv7393_mode(fbdev->client, BLANK_ON);
+	bfin_disable_dma();
+	bfin_disable_ppi();
+	dma_desc_list(fbdev, DESTRUCT);
+	fbdev->open = 0;
+	return 0;
+}
+
+static int
+bfin_adv7393_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+
+	switch (var->bits_per_pixel) {
+	case 16:/* DIRECTCOLOUR, 64k */
+		var->red.offset = info->var.red.offset;
+		var->green.offset = info->var.green.offset;
+		var->blue.offset = info->var.blue.offset;
+		var->red.length = info->var.red.length;
+		var->green.length = info->var.green.length;
+		var->blue.length = info->var.blue.length;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		var->transp.msb_right = 0;
+		var->red.msb_right = 0;
+		var->green.msb_right = 0;
+		var->blue.msb_right = 0;
+		break;
+	default:
+		pr_debug("%s: depth not supported: %u BPP\n", __func__,
+			 var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	if (info->var.xres != var->xres ||
+	    info->var.yres != var->yres ||
+	    info->var.xres_virtual != var->xres_virtual ||
+	    info->var.yres_virtual != var->yres_virtual) {
+		pr_debug("%s: Resolution not supported: X%u x Y%u\n",
+			 __func__, var->xres, var->yres);
+		return -EINVAL;
+	}
+
+	/*
+	 *  Memory limit
+	 */
+
+	if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
+		pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
+			 __func__, var->yres_virtual);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int
+bfin_adv7393_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	int dy;
+	u32 dmaaddr;
+	struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
+
+	if (!var || !info)
+		return -EINVAL;
+
+	if (var->xoffset - info->var.xoffset) {
+		/* No support for X panning for now! */
+		return -EINVAL;
+	}
+	dy = var->yoffset - info->var.yoffset;
+
+	if (dy) {
+		pr_debug("%s: Panning screen of %d lines\n", __func__, dy);
+
+		dmaaddr = fbdev->av1->start_addr;
+		dmaaddr += (info->fix.line_length * dy);
+		/* TODO: Wait for current frame to finished */
+
+		fbdev->av1->start_addr = (unsigned long)dmaaddr;
+		fbdev->av2->start_addr = (unsigned long)dmaaddr + fbdev->line_len;
+	}
+
+	return 0;
+
+}
+
+/* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */
+static int bfin_adv7393_fb_blank(int blank, struct fb_info *info)
+{
+	struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
+
+	switch (blank) {
+
+	case VESA_NO_BLANKING:
+		/* Turn on panel */
+		adv7393_mode(fbdev->client, BLANK_OFF);
+		break;
+
+	case VESA_VSYNC_SUSPEND:
+	case VESA_HSYNC_SUSPEND:
+	case VESA_POWERDOWN:
+		/* Turn off panel */
+		adv7393_mode(fbdev->client, BLANK_ON);
+		break;
+
+	default:
+		return -EINVAL;
+		break;
+	}
+	return 0;
+}
+
+int bfin_adv7393_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+	if (nocursor)
+		return 0;
+	else
+		return -EINVAL;	/* just to force soft_cursor() call */
+}
+
+static int bfin_adv7393_fb_setcolreg(u_int regno, u_int red, u_int green,
+				     u_int blue, u_int transp,
+				     struct fb_info *info)
+{
+	if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES)
+		return -EINVAL;
+
+	if (info->var.grayscale)
+		/* grayscale = 0.30*R + 0.59*G + 0.11*B */
+		red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+
+	if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+		u32 value;
+		/* Place color in the pseudopalette */
+		if (regno > 16)
+			return -EINVAL;
+
+		red   >>= (16 - info->var.red.length);
+		green >>= (16 - info->var.green.length);
+		blue  >>= (16 - info->var.blue.length);
+
+		value = (red   << info->var.red.offset) |
+			(green << info->var.green.offset)|
+			(blue  << info->var.blue.offset);
+		value &= 0xFFFF;
+
+		((u32 *) (info->pseudo_palette))[regno] = value;
+	}
+
+	return 0;
+}
+
+static int __devexit bfin_adv7393_fb_remove(struct i2c_client *client)
+{
+	struct adv7393fb_device *fbdev = i2c_get_clientdata(client);
+
+	adv7393_mode(client, POWER_DOWN);
+
+	if (fbdev->fb_mem)
+		dma_free_coherent(NULL, fbdev->fb_len, fbdev->fb_mem, fbdev->dma_handle);
+	free_dma(CH_PPI);
+	free_irq(IRQ_PPI_ERROR, fbdev);
+	unregister_framebuffer(&fbdev->info);
+	remove_proc_entry("driver/adv7393", NULL);
+	fb_dealloc_cmap(&fbdev->info.cmap);
+	kfree(fbdev->info.pseudo_palette);
+
+	if (ANOMALY_05000400)
+		gpio_free(P_IDENT(P_PPI0_FS3));	/* FS3 */
+	peripheral_free_list(ppi_pins);
+	kfree(fbdev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_adv7393_fb_suspend(struct device *dev)
+{
+	struct adv7393fb_device *fbdev = dev_get_drvdata(dev);
+
+	if (fbdev->open) {
+		bfin_disable_dma();
+		bfin_disable_ppi();
+		dma_desc_list(fbdev, DESTRUCT);
+	}
+	adv7393_mode(fbdev->client, POWER_DOWN);
+
+	return 0;
+}
+
+static int bfin_adv7393_fb_resume(struct device *dev)
+{
+	struct adv7393fb_device *fbdev = dev_get_drvdata(dev);
+
+	adv7393_mode(fbdev->client, POWER_ON);
+
+	if (fbdev->open) {
+		dma_desc_list(fbdev, BUILD);
+		bfin_config_ppi(fbdev);
+		bfin_config_dma(fbdev);
+		bfin_enable_ppi();
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops bfin_adv7393_dev_pm_ops = {
+	.suspend = bfin_adv7393_fb_suspend,
+	.resume  = bfin_adv7393_fb_resume,
+};
+#endif
+
+static const struct i2c_device_id bfin_adv7393_id[] = {
+	{DRIVER_NAME, 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, bfin_adv7393_id);
+
+static struct i2c_driver bfin_adv7393_fb_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+#ifdef CONFIG_PM
+		.pm   = &bfin_adv7393_dev_pm_ops,
+#endif
+	},
+	.probe = bfin_adv7393_fb_probe,
+	.remove = __devexit_p(bfin_adv7393_fb_remove),
+	.id_table = bfin_adv7393_id,
+};
+
+static int __init bfin_adv7393_fb_driver_init(void)
+{
+#if  defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	request_module("i2c-bfin-twi");
+#else
+	request_module("i2c-gpio");
+#endif
+
+	return i2c_add_driver(&bfin_adv7393_fb_driver);
+}
+module_init(bfin_adv7393_fb_driver_init);
+
+static void __exit bfin_adv7393_fb_driver_cleanup(void)
+{
+	i2c_del_driver(&bfin_adv7393_fb_driver);
+}
+module_exit(bfin_adv7393_fb_driver_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Frame buffer driver for ADV7393/2 Video Encoder");
+
+module_param(mode, int, 0);
+MODULE_PARM_DESC(mode,
+	"Video Mode (0=NTSC,1=PAL,2=NTSC 640x480,3=PAL 640x480,4=NTSC YCbCr input,5=PAL YCbCr input)");
+
+module_param(mem, int, 0);
+MODULE_PARM_DESC(mem,
+	"Size of frame buffer memory 1=Single 2=Double Size (allows y-panning / frame stacking)");
+
+module_param(nocursor, int, 0644);
+MODULE_PARM_DESC(nocursor, "cursor enable/disable");
diff --git a/drivers/video/bfin_adv7393fb.h b/drivers/video/bfin_adv7393fb.h
new file mode 100644
index 00000000000..8c7f9e4fc6e
--- /dev/null
+++ b/drivers/video/bfin_adv7393fb.h
@@ -0,0 +1,321 @@
+/*
+ * Frame buffer driver for ADV7393/2 video encoder
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or late.
+ */
+
+#ifndef __BFIN_ADV7393FB_H__
+#define __BFIN_ADV7393FB_H__
+
+#define BFIN_LCD_NBR_PALETTE_ENTRIES	256
+
+#ifdef CONFIG_NTSC
+# define VMODE 0
+#endif
+#ifdef CONFIG_PAL
+# define VMODE 1
+#endif
+#ifdef CONFIG_NTSC_640x480
+# define VMODE 2
+#endif
+#ifdef CONFIG_PAL_640x480
+# define VMODE 3
+#endif
+#ifdef CONFIG_NTSC_YCBCR
+# define VMODE 4
+#endif
+#ifdef CONFIG_PAL_YCBCR
+# define VMODE 5
+#endif
+
+#ifndef VMODE
+# define VMODE 1
+#endif
+
+#ifdef CONFIG_ADV7393_2XMEM
+# define VMEM 2
+#else
+# define VMEM 1
+#endif
+
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536) || defined(CONFIG_BF534)
+# define DMA_CFG_VAL	0x7935	/* Set Sync Bit */
+# define VB_DUMMY_MEMORY_SOURCE	L1_DATA_B_START
+#else
+# define DMA_CFG_VAL	0x7915
+# define VB_DUMMY_MEMORY_SOURCE	BOOT_ROM_START
+#endif
+
+enum {
+	DESTRUCT,
+	BUILD,
+};
+
+enum {
+	POWER_ON,
+	POWER_DOWN,
+	BLANK_ON,
+	BLANK_OFF,
+};
+
+#define DRIVER_NAME "bfin-adv7393"
+
+struct adv7393fb_modes {
+	const s8 name[25];	/* Full name */
+	u16 xres;		/* Active Horizonzal Pixels  */
+	u16 yres;		/* Active Vertical Pixels  */
+	u16 bpp;
+	u16 vmode;
+	u16 a_lines;		/* Active Lines per Field */
+	u16 vb1_lines;		/* Vertical Blanking Field 1 Lines */
+	u16 vb2_lines;		/* Vertical Blanking Field 2 Lines */
+	u16 tot_lines;		/* Total Lines per Frame */
+	u16 boeft_blank;	/* Before Odd/Even Field Transition No. of Blank Pixels */
+	u16 aoeft_blank;	/* After Odd/Even Field Transition No. of Blank Pixels */
+	const s8 *adv7393_i2c_initd;
+	u16 adv7393_i2c_initd_len;
+};
+
+static const u8 init_NTSC_TESTPATTERN[] = {
+	0x00, 0x1E,	/* Power up all DACs and PLL */
+	0x01, 0x00,	/* SD-Only Mode */
+	0x80, 0x10,	/* SSAF Luma Filter Enabled, NTSC Mode */
+	0x82, 0xCB,	/* Step control on, pixel data valid, pedestal on, PrPb SSAF on, CVBS/YC output */
+	0x84, 0x40,	/* SD Color Bar Test Pattern Enabled, DAC 2 = Luma, DAC 3 = Chroma */
+};
+
+static const u8 init_NTSC[] = {
+	0x00, 0x1E,	/* Power up all DACs and PLL */
+	0xC3, 0x26,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xC5, 0x12,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xC2, 0x4A,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xC6, 0x5E,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xBD, 0x19,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xBF, 0x42,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0x8C, 0x1F,	/* NTSC Subcarrier Frequency */
+	0x8D, 0x7C,	/* NTSC Subcarrier Frequency */
+	0x8E, 0xF0,	/* NTSC Subcarrier Frequency */
+	0x8F, 0x21,	/* NTSC Subcarrier Frequency */
+	0x01, 0x00,	/* SD-Only Mode */
+	0x80, 0x30,	/* SSAF Luma Filter Enabled, NTSC Mode */
+	0x82, 0x8B,	/* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
+	0x87, 0x80,	/* SD Color Bar Test Pattern Enabled, DAC 2 = Luma, DAC 3 = Chroma */
+	0x86, 0x82,
+	0x8B, 0x11,
+	0x88, 0x20,
+	0x8A, 0x0d,
+};
+
+static const u8 init_PAL[] = {
+	0x00, 0x1E,	/* Power up all DACs and PLL */
+	0xC3, 0x26,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xC5, 0x12,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xC2, 0x4A,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xC6, 0x5E,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xBD, 0x19,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0xBF, 0x42,	/* Program RGB->YCrCb Color Space convertion matrix */
+	0x8C, 0xCB,	/* PAL Subcarrier Frequency */
+	0x8D, 0x8A,	/* PAL Subcarrier Frequency */
+	0x8E, 0x09,	/* PAL Subcarrier Frequency */
+	0x8F, 0x2A,	/* PAL Subcarrier Frequency */
+	0x01, 0x00,	/* SD-Only Mode */
+	0x80, 0x11,	/* SSAF Luma Filter Enabled, PAL Mode */
+	0x82, 0x8B,	/* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
+	0x87, 0x80,	/* SD Color Bar Test Pattern Enabled, DAC 2 = Luma, DAC 3 = Chroma */
+	0x86, 0x82,
+	0x8B, 0x11,
+	0x88, 0x20,
+	0x8A, 0x0d,
+};
+
+static const u8 init_NTSC_YCbCr[] = {
+	0x00, 0x1E,	/* Power up all DACs and PLL */
+	0x8C, 0x1F,	/* NTSC Subcarrier Frequency */
+	0x8D, 0x7C,	/* NTSC Subcarrier Frequency */
+	0x8E, 0xF0,	/* NTSC Subcarrier Frequency */
+	0x8F, 0x21,	/* NTSC Subcarrier Frequency */
+	0x01, 0x00,	/* SD-Only Mode */
+	0x80, 0x30,	/* SSAF Luma Filter Enabled, NTSC Mode */
+	0x82, 0x8B,	/* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
+	0x87, 0x00,	/* DAC 2 = Luma, DAC 3 = Chroma */
+	0x86, 0x82,
+	0x8B, 0x11,
+	0x88, 0x08,
+	0x8A, 0x0d,
+};
+
+static const u8 init_PAL_YCbCr[] = {
+	0x00, 0x1E,	/* Power up all DACs and PLL */
+	0x8C, 0xCB,	/* PAL Subcarrier Frequency */
+	0x8D, 0x8A,	/* PAL Subcarrier Frequency */
+	0x8E, 0x09,	/* PAL Subcarrier Frequency */
+	0x8F, 0x2A,	/* PAL Subcarrier Frequency */
+	0x01, 0x00,	/* SD-Only Mode */
+	0x80, 0x11,	/* SSAF Luma Filter Enabled, PAL Mode */
+	0x82, 0x8B,	/* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
+	0x87, 0x00,	/* DAC 2 = Luma, DAC 3 = Chroma */
+	0x86, 0x82,
+	0x8B, 0x11,
+	0x88, 0x08,
+	0x8A, 0x0d,
+};
+
+static struct adv7393fb_modes known_modes[] = {
+	/* NTSC 720x480 CRT */
+	{
+		.name = "NTSC 720x480",
+		.xres = 720,
+		.yres = 480,
+		.bpp = 16,
+		.vmode = FB_VMODE_INTERLACED,
+		.a_lines = 240,
+		.vb1_lines = 22,
+		.vb2_lines = 23,
+		.tot_lines = 525,
+		.boeft_blank = 16,
+		.aoeft_blank = 122,
+		.adv7393_i2c_initd = init_NTSC,
+		.adv7393_i2c_initd_len = sizeof(init_NTSC)
+	},
+	/* PAL 720x480 CRT */
+	{
+		.name = "PAL 720x576",
+		.xres = 720,
+		.yres = 576,
+		.bpp = 16,
+		.vmode = FB_VMODE_INTERLACED,
+		.a_lines = 288,
+		.vb1_lines = 24,
+		.vb2_lines = 25,
+		.tot_lines = 625,
+		.boeft_blank = 12,
+		.aoeft_blank = 132,
+		.adv7393_i2c_initd = init_PAL,
+		.adv7393_i2c_initd_len = sizeof(init_PAL)
+	},
+	/* NTSC 640x480 CRT Experimental */
+	{
+		.name = "NTSC 640x480",
+		.xres = 640,
+		.yres = 480,
+		.bpp = 16,
+		.vmode = FB_VMODE_INTERLACED,
+		.a_lines = 240,
+		.vb1_lines = 22,
+		.vb2_lines = 23,
+		.tot_lines = 525,
+		.boeft_blank = 16 + 40,
+		.aoeft_blank = 122 + 40,
+		.adv7393_i2c_initd = init_NTSC,
+		.adv7393_i2c_initd_len = sizeof(init_NTSC)
+	},
+	/* PAL 640x480 CRT Experimental */
+	{
+		.name = "PAL 640x480",
+		.xres = 640,
+		.yres = 480,
+		.bpp = 16,
+		.vmode = FB_VMODE_INTERLACED,
+		.a_lines = 288 - 20,
+		.vb1_lines = 24 + 20,
+		.vb2_lines = 25 + 20,
+		.tot_lines = 625,
+		.boeft_blank = 12 + 40,
+		.aoeft_blank = 132 + 40,
+		.adv7393_i2c_initd = init_PAL,
+		.adv7393_i2c_initd_len = sizeof(init_PAL)
+	},
+	/* NTSC 720x480 YCbCR */
+	{
+		.name = "NTSC 720x480 YCbCR",
+		.xres = 720,
+		.yres = 480,
+		.bpp = 16,
+		.vmode = FB_VMODE_INTERLACED,
+		.a_lines = 240,
+		.vb1_lines = 22,
+		.vb2_lines = 23,
+		.tot_lines = 525,
+		.boeft_blank = 16,
+		.aoeft_blank = 122,
+		.adv7393_i2c_initd = init_NTSC_YCbCr,
+		.adv7393_i2c_initd_len = sizeof(init_NTSC_YCbCr)
+	},
+	/* PAL 720x480 CRT */
+	{
+		.name = "PAL 720x576 YCbCR",
+		.xres = 720,
+		.yres = 576,
+		.bpp = 16,
+		.vmode = FB_VMODE_INTERLACED,
+		.a_lines = 288,
+		.vb1_lines = 24,
+		.vb2_lines = 25,
+		.tot_lines = 625,
+		.boeft_blank = 12,
+		.aoeft_blank = 132,
+		.adv7393_i2c_initd = init_PAL_YCbCr,
+		.adv7393_i2c_initd_len = sizeof(init_PAL_YCbCr)
+	}
+};
+
+struct adv7393fb_regs {
+
+};
+
+struct adv7393fb_device {
+	struct fb_info info;	/* FB driver info record */
+
+	struct i2c_client *client;
+
+	struct dmasg *descriptor_list_head;
+	struct dmasg *vb1;
+	struct dmasg *av1;
+	struct dmasg *vb2;
+	struct dmasg *av2;
+
+	dma_addr_t dma_handle;
+
+	struct fb_info bfin_adv7393_fb;
+
+	struct adv7393fb_modes *modes;
+
+	struct adv7393fb_regs *regs;	/* Registers memory map */
+	size_t regs_len;
+	size_t fb_len;
+	size_t line_len;
+	u16 open;
+	u16 *fb_mem;		/* RGB Buffer */
+
+};
+
+#define to_adv7393fb_device(_info) \
+	  (_info ? container_of(_info, struct adv7393fb_device, info) : NULL);
+
+static int bfin_adv7393_fb_open(struct fb_info *info, int user);
+static int bfin_adv7393_fb_release(struct fb_info *info, int user);
+static int bfin_adv7393_fb_check_var(struct fb_var_screeninfo *var,
+				     struct fb_info *info);
+
+static int bfin_adv7393_fb_pan_display(struct fb_var_screeninfo *var,
+				       struct fb_info *info);
+
+static int bfin_adv7393_fb_blank(int blank, struct fb_info *info);
+
+static void bfin_config_ppi(struct adv7393fb_device *fbdev);
+static int bfin_config_dma(struct adv7393fb_device *fbdev);
+static void bfin_disable_dma(void);
+static void bfin_enable_ppi(void);
+static void bfin_disable_ppi(void);
+
+static inline int adv7393_write(struct i2c_client *client, u8 reg, u8 value);
+static inline int adv7393_read(struct i2c_client *client, u8 reg);
+static int adv7393_write_block(struct i2c_client *client, const u8 *data,
+			       unsigned int len);
+
+int bfin_adv7393_fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
+static int bfin_adv7393_fb_setcolreg(u_int, u_int, u_int, u_int,
+				     u_int, struct fb_info *info);
+
+#endif
diff --git a/drivers/video/carminefb.c b/drivers/video/carminefb.c
index 6b19136aa18..caaa27d4a46 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/carminefb.c
@@ -654,7 +654,7 @@ static int __devinit carminefb_probe(struct pci_dev *dev,
 		printk(KERN_ERR "carminefb: Memory bar is only %d bytes, %d "
 				"are required.", carminefb_fix.smem_len,
 				CARMINE_TOTAL_DIPLAY_MEM);
-		goto err_free_reg_mmio;
+		goto err_unmap_vregs;
 	}
 
 	if (!request_mem_region(carminefb_fix.smem_start,
@@ -667,8 +667,6 @@ static int __devinit carminefb_probe(struct pci_dev *dev,
 			carminefb_fix.smem_len);
 	if (!hw->screen_mem) {
 		printk(KERN_ERR "carmine: Can't ioremap smem area.\n");
-		release_mem_region(carminefb_fix.smem_start,
-				carminefb_fix.smem_len);
 		goto err_reg_smem;
 	}
 
@@ -710,7 +708,7 @@ err_deinit_hw:
 err_unmap_screen:
 	iounmap(hw->screen_mem);
 err_reg_smem:
-	release_mem_region(carminefb_fix.mmio_start, carminefb_fix.mmio_len);
+	release_mem_region(carminefb_fix.smem_start, carminefb_fix.smem_len);
 err_unmap_vregs:
 	iounmap(hw->v_regs);
 err_free_reg_mmio:
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 54e32c51361..915448ec75b 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -47,7 +47,6 @@
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/screen_info.h>
-#include <linux/smp_lock.h>
 #include <video/vga.h>
 #include <asm/io.h>
 
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index cad7d45c8ba..c265aed09e0 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1029,10 +1029,6 @@ static int __init fb_probe(struct platform_device *device)
 		goto err_release_pl_mem;
 	}
 
-	ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
-	if (ret)
-		goto err_release_pl_mem;
-
 	/* Initialize par */
 	da8xx_fb_info->var.bits_per_pixel = lcd_cfg->bpp;
 
@@ -1060,7 +1056,7 @@ static int __init fb_probe(struct platform_device *device)
 
 	ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
 	if (ret)
-		goto err_free_irq;
+		goto err_release_pl_mem;
 	da8xx_fb_info->cmap.len = par->palette_sz;
 
 	/* initialize var_screeninfo */
@@ -1088,8 +1084,13 @@ static int __init fb_probe(struct platform_device *device)
 		goto err_cpu_freq;
 	}
 #endif
+
+	ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
+	if (ret)
+		goto irq_freq;
 	return 0;
 
+irq_freq:
 #ifdef CONFIG_CPU_FREQ
 err_cpu_freq:
 	unregister_framebuffer(da8xx_fb_info);
@@ -1098,9 +1099,6 @@ err_cpu_freq:
 err_dealloc_cmap:
 	fb_dealloc_cmap(&da8xx_fb_info->cmap);
 
-err_free_irq:
-	free_irq(par->irq, par);
-
 err_release_pl_mem:
 	dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base,
 			  par->p_palette_base);
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 6b93ef93cb1..804000183c5 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -75,7 +75,7 @@ int fb_deferred_io_fsync(struct file *file, int datasync)
 		return 0;
 
 	/* Kill off the delayed work */
-	cancel_rearming_delayed_work(&info->deferred_work);
+	cancel_delayed_work_sync(&info->deferred_work);
 
 	/* Run it immediately */
 	return schedule_delayed_work(&info->deferred_work, 0);
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbcmap.c
index f53b9f1d6ab..5c3960da755 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbcmap.c
@@ -80,6 +80,7 @@ static const struct fb_cmap default_16_colors = {
  *	@cmap: frame buffer colormap structure
  *	@len: length of @cmap
  *	@transp: boolean, 1 if there is transparency, 0 otherwise
+ *	@flags: flags for kmalloc memory allocation
  *
  *	Allocates memory for a colormap @cmap.  @len is the
  *	number of entries in the palette.
@@ -88,34 +89,48 @@ static const struct fb_cmap default_16_colors = {
  *
  */
 
-int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp)
+int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags)
 {
-    int size = len*sizeof(u16);
-
-    if (cmap->len != len) {
-	fb_dealloc_cmap(cmap);
-	if (!len)
-	    return 0;
-	if (!(cmap->red = kmalloc(size, GFP_ATOMIC)))
-	    goto fail;
-	if (!(cmap->green = kmalloc(size, GFP_ATOMIC)))
-	    goto fail;
-	if (!(cmap->blue = kmalloc(size, GFP_ATOMIC)))
-	    goto fail;
-	if (transp) {
-	    if (!(cmap->transp = kmalloc(size, GFP_ATOMIC)))
+	int size = len * sizeof(u16);
+	int ret = -ENOMEM;
+
+	if (cmap->len != len) {
+		fb_dealloc_cmap(cmap);
+		if (!len)
+			return 0;
+
+		cmap->red = kmalloc(size, flags);
+		if (!cmap->red)
+			goto fail;
+		cmap->green = kmalloc(size, flags);
+		if (!cmap->green)
+			goto fail;
+		cmap->blue = kmalloc(size, flags);
+		if (!cmap->blue)
+			goto fail;
+		if (transp) {
+			cmap->transp = kmalloc(size, flags);
+			if (!cmap->transp)
+				goto fail;
+		} else {
+			cmap->transp = NULL;
+		}
+	}
+	cmap->start = 0;
+	cmap->len = len;
+	ret = fb_copy_cmap(fb_default_cmap(len), cmap);
+	if (ret)
 		goto fail;
-	} else
-	    cmap->transp = NULL;
-    }
-    cmap->start = 0;
-    cmap->len = len;
-    fb_copy_cmap(fb_default_cmap(len), cmap);
-    return 0;
+	return 0;
 
 fail:
-    fb_dealloc_cmap(cmap);
-    return -ENOMEM;
+	fb_dealloc_cmap(cmap);
+	return ret;
+}
+
+int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp)
+{
+	return fb_alloc_cmap_gfp(cmap, len, transp, GFP_ATOMIC);
 }
 
 /**
@@ -250,8 +265,12 @@ int fb_set_user_cmap(struct fb_cmap_user *cmap, struct fb_info *info)
 	int rc, size = cmap->len * sizeof(u16);
 	struct fb_cmap umap;
 
+	if (size < 0 || size < cmap->len)
+		return -E2BIG;
+
 	memset(&umap, 0, sizeof(struct fb_cmap));
-	rc = fb_alloc_cmap(&umap, cmap->len, cmap->transp != NULL);
+	rc = fb_alloc_cmap_gfp(&umap, cmap->len, cmap->transp != NULL,
+				GFP_KERNEL);
 	if (rc)
 		return rc;
 	if (copy_from_user(umap.red, cmap->red, size) ||
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 0e6aa3d96a4..4ac1201ad6c 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1458,7 +1458,7 @@ static bool apertures_overlap(struct aperture *gen, struct aperture *hw)
 	if (gen->base == hw->base)
 		return true;
 	/* is the generic aperture base inside the hw base->hw base+size */
-	if (gen->base > hw->base && gen->base <= hw->base + hw->size)
+	if (gen->base > hw->base && gen->base < hw->base + hw->size)
 		return true;
 	return false;
 }
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 563a98b88e9..4f57485f8c5 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -973,6 +973,90 @@ void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs)
 	DPRINTK("========================================\n");
 }
 
+/**
+ * fb_edid_add_monspecs() - add monitor video modes from E-EDID data
+ * @edid:	128 byte array with an E-EDID block
+ * @spacs:	monitor specs to be extended
+ */
+void fb_edid_add_monspecs(unsigned char *edid, struct fb_monspecs *specs)
+{
+	unsigned char *block;
+	struct fb_videomode *m;
+	int num = 0, i;
+	u8 svd[64], edt[(128 - 4) / DETAILED_TIMING_DESCRIPTION_SIZE];
+	u8 pos = 4, svd_n = 0;
+
+	if (!edid)
+		return;
+
+	if (!edid_checksum(edid))
+		return;
+
+	if (edid[0] != 0x2 ||
+	    edid[2] < 4 || edid[2] > 128 - DETAILED_TIMING_DESCRIPTION_SIZE)
+		return;
+
+	DPRINTK("  Short Video Descriptors\n");
+
+	while (pos < edid[2]) {
+		u8 len = edid[pos] & 0x1f, type = (edid[pos] >> 5) & 7;
+		pr_debug("Data block %u of %u bytes\n", type, len);
+		if (type == 2)
+			for (i = pos; i < pos + len; i++) {
+				u8 idx = edid[pos + i] & 0x7f;
+				svd[svd_n++] = idx;
+				pr_debug("N%sative mode #%d\n",
+					 edid[pos + i] & 0x80 ? "" : "on-n", idx);
+			}
+		pos += len + 1;
+	}
+
+	block = edid + edid[2];
+
+	DPRINTK("  Extended Detailed Timings\n");
+
+	for (i = 0; i < (128 - edid[2]) / DETAILED_TIMING_DESCRIPTION_SIZE;
+	     i++, block += DETAILED_TIMING_DESCRIPTION_SIZE)
+		if (PIXEL_CLOCK)
+			edt[num++] = block - edid;
+
+	/* Yikes, EDID data is totally useless */
+	if (!(num + svd_n))
+		return;
+
+	m = kzalloc((specs->modedb_len + num + svd_n) *
+		       sizeof(struct fb_videomode), GFP_KERNEL);
+
+	if (!m)
+		return;
+
+	memcpy(m, specs->modedb, specs->modedb_len * sizeof(struct fb_videomode));
+
+	for (i = specs->modedb_len; i < specs->modedb_len + num; i++) {
+		get_detailed_timing(edid + edt[i - specs->modedb_len], &m[i]);
+		if (i == specs->modedb_len)
+			m[i].flag |= FB_MODE_IS_FIRST;
+		pr_debug("Adding %ux%u@%u\n", m[i].xres, m[i].yres, m[i].refresh);
+	}
+
+	for (i = specs->modedb_len + num; i < specs->modedb_len + num + svd_n; i++) {
+		int idx = svd[i - specs->modedb_len - num];
+		if (!idx || idx > 63) {
+			pr_warning("Reserved SVD code %d\n", idx);
+		} else if (idx > ARRAY_SIZE(cea_modes) || !cea_modes[idx].xres) {
+			pr_warning("Unimplemented SVD code %d\n", idx);
+		} else {
+			memcpy(&m[i], cea_modes + idx, sizeof(m[i]));
+			pr_debug("Adding SVD #%d: %ux%u@%u\n", idx,
+				 m[i].xres, m[i].yres, m[i].refresh);
+		}
+	}
+
+	kfree(specs->modedb);
+	specs->modedb = m;
+	specs->modedb_len = specs->modedb_len + num + svd_n;
+}
+
 /*
  * VESA Generalized Timing Formula (GTF)
  */
@@ -1289,6 +1373,9 @@ void fb_edid_to_monspecs(unsigned char *edid, struct fb_monspecs *specs)
 {
 	specs = NULL;
 }
+void fb_edid_add_monspecs(unsigned char *edid, struct fb_monspecs *specs)
+{
+}
 void fb_destroy_modedb(struct fb_videomode *modedb)
 {
 }
@@ -1396,6 +1483,7 @@ EXPORT_SYMBOL(fb_firmware_edid);
 
 EXPORT_SYMBOL(fb_parse_edid);
 EXPORT_SYMBOL(fb_edid_to_monspecs);
+EXPORT_SYMBOL(fb_edid_add_monspecs);
 EXPORT_SYMBOL(fb_get_mode);
 EXPORT_SYMBOL(fb_validate_mode);
 EXPORT_SYMBOL(fb_destroy_modedb);
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index e4c4d89b786..be8ccb47ebe 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -22,6 +22,7 @@
 #define DC_HFILT_COUNT	0x100
 #define DC_VFILT_COUNT	0x100
 #define VP_COEFF_SIZE	0x1000
+#define VP_PAL_COUNT	0x100
 
 #define OUTPUT_CRT   0x01
 #define OUTPUT_PANEL 0x02
@@ -48,7 +49,8 @@ struct lxfb_par {
 	uint64_t vp[VP_REG_COUNT];
 	uint64_t fp[FP_REG_COUNT];
 
-	uint32_t pal[DC_PAL_COUNT];
+	uint32_t dc_pal[DC_PAL_COUNT];
+	uint32_t vp_pal[VP_PAL_COUNT];
 	uint32_t hcoeff[DC_HFILT_COUNT * 2];
 	uint32_t vcoeff[DC_VFILT_COUNT];
 	uint32_t vp_coeff[VP_COEFF_SIZE / 4];
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index bc35a95e59d..79e9abc72b8 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -276,10 +276,10 @@ static void lx_graphics_enable(struct fb_info *info)
 		write_fp(par, FP_PT1, 0);
 		temp = FP_PT2_SCRC;
 
-		if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
+		if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
 			temp |= FP_PT2_HSP;
 
-		if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
+		if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
 			temp |= FP_PT2_VSP;
 
 		write_fp(par, FP_PT2, temp);
@@ -610,10 +610,15 @@ static void lx_save_regs(struct lxfb_par *par)
 	memcpy(par->vp, par->vp_regs, sizeof(par->vp));
 	memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
 
-	/* save the palette */
+	/* save the display controller palette */
 	write_dc(par, DC_PAL_ADDRESS, 0);
-	for (i = 0; i < ARRAY_SIZE(par->pal); i++)
-		par->pal[i] = read_dc(par, DC_PAL_DATA);
+	for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+		par->dc_pal[i] = read_dc(par, DC_PAL_DATA);
+
+	/* save the video processor palette */
+	write_vp(par, VP_PAR, 0);
+	for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+		par->vp_pal[i] = read_vp(par, VP_PDR);
 
 	/* save the horizontal filter coefficients */
 	filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
@@ -706,8 +711,8 @@ static void lx_restore_display_ctlr(struct lxfb_par *par)
 
 	/* restore the palette */
 	write_dc(par, DC_PAL_ADDRESS, 0);
-	for (i = 0; i < ARRAY_SIZE(par->pal); i++)
-		write_dc(par, DC_PAL_DATA, par->pal[i]);
+	for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+		write_dc(par, DC_PAL_DATA, par->dc_pal[i]);
 
 	/* restore the horizontal filter coefficients */
 	filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
@@ -751,6 +756,11 @@ static void lx_restore_video_proc(struct lxfb_par *par)
 		}
 	}
 
+	/* restore video processor palette */
+	write_vp(par, VP_PAR, 0);
+	for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+		write_vp(par, VP_PDR, par->vp_pal[i]);
+
 	/* restore video coeff ram */
 	memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
 }
diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c
index af8f0f2cc78..4052718eefa 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/hgafb.c
@@ -454,7 +454,6 @@ static int hgafb_blank(int blank_mode, struct fb_info *info)
 /*
  * Accel functions
  */
-#ifdef CONFIG_FB_HGA_ACCEL
 static void hgafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 {
 	u_int rows, y;
@@ -466,7 +465,7 @@ static void hgafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 		dest = rowaddr(info, y) + (rect->dx >> 3);
 		switch (rect->rop) {
 		case ROP_COPY:
-			//fb_memset(dest, rect->color, (rect->width >> 3));
+			memset_io(dest, rect->color, (rect->width >> 3));
 			break;
 		case ROP_XOR:
 			fb_writeb(~(fb_readb(dest)), dest);
@@ -488,7 +487,7 @@ static void hgafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 		for (rows = area->height; rows--; ) {
 			src = rowaddr(info, y1) + (area->sx >> 3);
 			dest = rowaddr(info, y2) + (area->dx >> 3);
-			//fb_memmove(dest, src, (area->width >> 3));
+			memmove(dest, src, (area->width >> 3));
 			y1++;
 			y2++;
 		}
@@ -499,7 +498,7 @@ static void hgafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 		for (rows = area->height; rows--;) {
 			src = rowaddr(info, y1) + (area->sx >> 3);
 			dest = rowaddr(info, y2) + (area->dx >> 3);
-			//fb_memmove(dest, src, (area->width >> 3));
+			memmove(dest, src, (area->width >> 3));
 			y1--;
 			y2--;
 		}
@@ -511,20 +510,17 @@ static void hgafb_imageblit(struct fb_info *info, const struct fb_image *image)
 	u8 __iomem *dest;
 	u8 *cdat = (u8 *) image->data;
 	u_int rows, y = image->dy;
+	u_int x;
 	u8 d;
 
 	for (rows = image->height; rows--; y++) {
-		d = *cdat++;
-		dest = rowaddr(info, y) + (image->dx >> 3);
-		fb_writeb(d, dest);
+		for (x = 0; x < image->width; x+= 8) {
+			d = *cdat++;
+			dest = rowaddr(info, y) + ((image->dx + x)>> 3);
+			fb_writeb(d, dest);
+		}
 	}
 }
-#else /* !CONFIG_FB_HGA_ACCEL */
-#define hgafb_fillrect cfb_fillrect
-#define hgafb_copyarea cfb_copyarea
-#define hgafb_imageblit cfb_imageblit
-#endif /* CONFIG_FB_HGA_ACCEL */
-
 
 static struct fb_ops hgafb_ops = {
 	.owner		= THIS_MODULE,
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c
index cd2c728a809..7db17d0d8a8 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/i810/i810-i2c.c
@@ -45,8 +45,10 @@ static void i810i2c_setscl(void *data, int state)
         struct i810fb_par         *par = chan->par;
 	u8                        __iomem *mmio = par->mmio_start_virtual;
 
-	i810_writel(mmio, chan->ddc_base, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
-		    SCL_DIR_MASK | SCL_VAL_MASK);
+	if (state)
+		i810_writel(mmio, chan->ddc_base, SCL_DIR_MASK | SCL_VAL_MASK);
+	else
+		i810_writel(mmio, chan->ddc_base, SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK);
 	i810_readl(mmio, chan->ddc_base);	/* flush posted write */
 }
 
@@ -56,8 +58,10 @@ static void i810i2c_setsda(void *data, int state)
         struct i810fb_par         *par = chan->par;
 	u8                        __iomem *mmio = par->mmio_start_virtual;
 
- 	i810_writel(mmio, chan->ddc_base, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
-		    SDA_DIR_MASK | SDA_VAL_MASK);
+	if (state)
+		i810_writel(mmio, chan->ddc_base, SDA_DIR_MASK | SDA_VAL_MASK);
+	else
+		i810_writel(mmio, chan->ddc_base, SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK);
 	i810_readl(mmio, chan->ddc_base);	/* flush posted write */
 }
 
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 5c363d026f6..1ab2c258867 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -53,11 +53,8 @@
 #define LCDC_SIZE	0x04
 #define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
 
-#ifdef CONFIG_ARCH_MX1
-#define SIZE_YMAX(y)	((y) & 0x1ff)
-#else
-#define SIZE_YMAX(y)	((y) & 0x3ff)
-#endif
+#define YMAX_MASK       (cpu_is_mx1() ? 0x1ff : 0x3ff)
+#define SIZE_YMAX(y)	((y) & YMAX_MASK)
 
 #define LCDC_VPW	0x08
 #define VPW_VPW(x)	((x) & 0x3ff)
@@ -623,7 +620,7 @@ static int imxfb_activate_var(struct fb_var_screeninfo *var, struct fb_info *inf
 	if (var->right_margin > 255)
 		printk(KERN_ERR "%s: invalid right_margin %d\n",
 			info->fix.id, var->right_margin);
-	if (var->yres < 1 || var->yres > 511)
+	if (var->yres < 1 || var->yres > YMAX_MASK)
 		printk(KERN_ERR "%s: invalid yres %d\n",
 			info->fix.id, var->yres);
 	if (var->vsync_len > 100)
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 0a4dbdc1693..d2bb365f09b 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -274,10 +274,61 @@ static const struct fb_videomode modedb[] = {
        /* 800x520i @ 50 Hz, 15.625 kHz hsync (PAL RGB) */
        NULL, 50, 800, 520, 58823, 144, 64, 72, 28, 80, 5,
        0, FB_VMODE_INTERLACED
+    }, {
+	/* 864x480 @ 60 Hz, 35.15 kHz hsync */
+	NULL, 60, 864, 480, 27777, 1, 1, 1, 1, 0, 0,
+	0, FB_VMODE_NONINTERLACED
     },
 };
 
 #ifdef CONFIG_FB_MODE_HELPERS
+const struct fb_videomode cea_modes[64] = {
+	/* #1: 640x480p@59.94/60Hz */
+	[1] = {
+		NULL, 60, 640, 480, 39722, 48, 16, 33, 10, 96, 2, 0, FB_VMODE_NONINTERLACED, 0,
+	},
+	/* #3: 720x480p@59.94/60Hz */
+	[3] = {
+		NULL, 60, 720, 480, 37037, 60, 16, 30, 9, 62, 6, 0, FB_VMODE_NONINTERLACED, 0,
+	},
+	/* #5: 1920x1080i@59.94/60Hz */
+	[5] = {
+		NULL, 60, 1920, 1080, 13763, 148, 88, 15, 2, 44, 5,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_INTERLACED, 0,
+	},
+	/* #7: 720(1440)x480iH@59.94/60Hz */
+	[7] = {
+		NULL, 60, 1440, 480, 18554/*37108*/, 114, 38, 15, 4, 124, 3, 0, FB_VMODE_INTERLACED, 0,
+	},
+	/* #9: 720(1440)x240pH@59.94/60Hz */
+	[9] = {
+		NULL, 60, 1440, 240, 18554, 114, 38, 16, 4, 124, 3, 0, FB_VMODE_NONINTERLACED, 0,
+	},
+	/* #18: 720x576pH@50Hz */
+	[18] = {
+		NULL, 50, 720, 576, 37037, 68, 12, 39, 5, 64, 5, 0, FB_VMODE_NONINTERLACED, 0,
+	},
+	/* #19: 1280x720p@50Hz */
+	[19] = {
+		NULL, 50, 1280, 720, 13468, 220, 440, 20, 5, 40, 5,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, 0,
+	},
+	/* #20: 1920x1080i@50Hz */
+	[20] = {
+		NULL, 50, 1920, 1080, 13480, 148, 528, 15, 5, 528, 5,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_INTERLACED, 0,
+	},
+	/* #32: 1920x1080p@23.98/24Hz */
+	[32] = {
+		NULL, 24, 1920, 1080, 13468, 148, 638, 36, 4, 44, 5,
+		FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED, 0,
+	},
+	/* #35: (2880)x480p4x@59.94/60Hz */
+	[35] = {
+		NULL, 60, 2880, 480, 9250, 240, 64, 30, 9, 248, 6, 0, FB_VMODE_NONINTERLACED, 0,
+	},
+};
+
 const struct fb_videomode vesa_modes[] = {
 	/* 0 640x350-85 VESA */
 	{ NULL, 85, 640, 350, 31746,  96, 32, 60, 32, 64, 3,
@@ -855,6 +906,7 @@ const struct fb_videomode *fb_find_nearest_mode(const struct fb_videomode *mode,
 			abs(cmode->yres - mode->yres);
 		if (diff > d) {
 			diff = d;
+			diff_refresh = abs(cmode->refresh - mode->refresh);
 			best = cmode;
 		} else if (diff == d) {
 			d = abs(cmode->refresh - mode->refresh);
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 7cfc170bce1..cb013919e9c 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 
+#include <mach/dma.h>
 #include <mach/hardware.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
@@ -1420,6 +1421,9 @@ static bool chan_filter(struct dma_chan *chan, void *arg)
 	struct device *dev;
 	struct mx3fb_platform_data *mx3fb_pdata;
 
+	if (!imx_dma_is_ipu(chan))
+		return false;
+
 	if (!rq)
 		return false;
 
@@ -1470,8 +1474,7 @@ static int mx3fb_probe(struct platform_device *pdev)
 		goto eremap;
 	}
 
-	pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end,
-		 mx3fb->reg_base);
+	pr_debug("Remapped %pR at %p\n", sdc_reg, mx3fb->reg_base);
 
 	/* IDMAC interface */
 	dmaengine_get();
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 455c6055325..083c8fe53e2 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -1,7 +1,7 @@
 config FB_OMAP
 	tristate "OMAP frame buffer support (EXPERIMENTAL)"
-	depends on FB && ARCH_OMAP && (OMAP2_DSS = "n")
-
+	depends on FB && (OMAP2_DSS = "n")
+	depends on ARCH_OMAP1 || ARCH_OMAP2 || ARCH_OMAP3
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/omap/lcd_mipid.c
index 64dcc7439c9..90e3bdd1b7a 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/omap/lcd_mipid.c
@@ -396,7 +396,7 @@ static void mipid_esd_start_check(struct mipid_device *md)
 static void mipid_esd_stop_check(struct mipid_device *md)
 {
 	if (md->esd_check != NULL)
-		cancel_rearming_delayed_workqueue(md->esd_wq, &md->esd_work);
+		cancel_delayed_work_sync(&md->esd_work);
 }
 
 static void mipid_esd_work(struct work_struct *work)
diff --git a/drivers/video/omap2/vram.c b/drivers/video/omap2/vram.c
index fed2a72bc6b..9441e2eb3de 100644
--- a/drivers/video/omap2/vram.c
+++ b/drivers/video/omap2/vram.c
@@ -551,12 +551,18 @@ void __init omap_vram_reserve_sdram_memblock(void)
 	if (!size)
 		return;
 
-	size = PAGE_ALIGN(size);
+	size = ALIGN(size, SZ_2M);
 
 	if (paddr) {
-		if ((paddr & ~PAGE_MASK) ||
-		    !memblock_is_region_memory(paddr, size)) {
-			pr_err("Illegal SDRAM region for VRAM\n");
+		if (paddr & ~PAGE_MASK) {
+			pr_err("VRAM start address 0x%08x not page aligned\n",
+					paddr);
+			return;
+		}
+
+		if (!memblock_is_region_memory(paddr, size)) {
+			pr_err("Illegal SDRAM region 0x%08x..0x%08x for VRAM\n",
+					paddr, paddr + size - 1);
 			return;
 		}
 
@@ -570,9 +576,12 @@ void __init omap_vram_reserve_sdram_memblock(void)
 			return;
 		}
 	} else {
-		paddr = memblock_alloc_base(size, PAGE_SIZE, MEMBLOCK_REAL_LIMIT);
+		paddr = memblock_alloc(size, SZ_2M);
 	}
 
+	memblock_free(paddr, size);
+	memblock_remove(paddr, size);
+
 	omap_vram_add_region(paddr, size);
 
 	pr_info("Reserving %u bytes SDRAM for VRAM\n", size);
diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/pxa3xx-gcu.c
new file mode 100644
index 00000000000..b81168df253
--- /dev/null
+++ b/drivers/video/pxa3xx-gcu.c
@@ -0,0 +1,772 @@
+/*
+ *  pxa3xx-gc.c - Linux kernel module for PXA3xx graphics controllers
+ *
+ *  This driver needs a DirectFB counterpart in user space, communication
+ *  is handled via mmap()ed memory areas and an ioctl.
+ *
+ *  Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *  Copyright (c) 2009 Janine Kropp <nin@directfb.org>
+ *  Copyright (c) 2009 Denis Oliver Kropp <dok@directfb.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * WARNING: This controller is attached to System Bus 2 of the PXA which
+ * needs its arbiter to be enabled explictly (CKENB & 1<<9).
+ * There is currently no way to do this from Linux, so you need to teach
+ * your bootloader for now.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/miscdevice.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+#include <linux/ioctl.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+
+#include "pxa3xx-gcu.h"
+
+#define DRV_NAME	"pxa3xx-gcu"
+#define MISCDEV_MINOR	197
+
+#define REG_GCCR	0x00
+#define GCCR_SYNC_CLR	(1 << 9)
+#define GCCR_BP_RST	(1 << 8)
+#define GCCR_ABORT	(1 << 6)
+#define GCCR_STOP	(1 << 4)
+
+#define REG_GCISCR	0x04
+#define REG_GCIECR	0x08
+#define REG_GCRBBR	0x20
+#define REG_GCRBLR	0x24
+#define REG_GCRBHR	0x28
+#define REG_GCRBTR	0x2C
+#define REG_GCRBEXHR	0x30
+
+#define IE_EOB		(1 << 0)
+#define IE_EEOB		(1 << 5)
+#define IE_ALL		0xff
+
+#define SHARED_SIZE	PAGE_ALIGN(sizeof(struct pxa3xx_gcu_shared))
+
+/* #define PXA3XX_GCU_DEBUG */
+/* #define PXA3XX_GCU_DEBUG_TIMER */
+
+#ifdef PXA3XX_GCU_DEBUG
+#define QDUMP(msg)					\
+	do {						\
+		QPRINT(priv, KERN_DEBUG, msg);		\
+	} while (0)
+#else
+#define QDUMP(msg)	do {} while (0)
+#endif
+
+#define QERROR(msg)					\
+	do {						\
+		QPRINT(priv, KERN_ERR, msg);		\
+	} while (0)
+
+struct pxa3xx_gcu_batch {
+	struct pxa3xx_gcu_batch *next;
+	u32			*ptr;
+	dma_addr_t		 phys;
+	unsigned long		 length;
+};
+
+struct pxa3xx_gcu_priv {
+	void __iomem		 *mmio_base;
+	struct clk		 *clk;
+	struct pxa3xx_gcu_shared *shared;
+	dma_addr_t		  shared_phys;
+	struct resource		 *resource_mem;
+	struct miscdevice	  misc_dev;
+	struct file_operations	  misc_fops;
+	wait_queue_head_t	  wait_idle;
+	wait_queue_head_t	  wait_free;
+	spinlock_t		  spinlock;
+	struct timeval 		  base_time;
+
+	struct pxa3xx_gcu_batch *free;
+
+	struct pxa3xx_gcu_batch *ready;
+	struct pxa3xx_gcu_batch *ready_last;
+	struct pxa3xx_gcu_batch *running;
+};
+
+static inline unsigned long
+gc_readl(struct pxa3xx_gcu_priv *priv, unsigned int off)
+{
+	return __raw_readl(priv->mmio_base + off);
+}
+
+static inline void
+gc_writel(struct pxa3xx_gcu_priv *priv, unsigned int off, unsigned long val)
+{
+	__raw_writel(val, priv->mmio_base + off);
+}
+
+#define QPRINT(priv, level, msg)					\
+	do {								\
+		struct timeval tv;					\
+		struct pxa3xx_gcu_shared *shared = priv->shared;	\
+		u32 base = gc_readl(priv, REG_GCRBBR);			\
+									\
+		do_gettimeofday(&tv);					\
+									\
+		printk(level "%ld.%03ld.%03ld - %-17s: %-21s (%s, "	\
+			"STATUS "					\
+			"0x%02lx, B 0x%08lx [%ld], E %5ld, H %5ld, "	\
+			"T %5ld)\n",					\
+			tv.tv_sec - priv->base_time.tv_sec,		\
+			tv.tv_usec / 1000, tv.tv_usec % 1000,		\
+			__func__, msg,					\
+			shared->hw_running ? "running" : "   idle",	\
+			gc_readl(priv, REG_GCISCR),			\
+			gc_readl(priv, REG_GCRBBR),			\
+			gc_readl(priv, REG_GCRBLR),			\
+			(gc_readl(priv, REG_GCRBEXHR) - base) / 4,	\
+			(gc_readl(priv, REG_GCRBHR) - base) / 4,	\
+			(gc_readl(priv, REG_GCRBTR) - base) / 4);	\
+	} while (0)
+
+static void
+pxa3xx_gcu_reset(struct pxa3xx_gcu_priv *priv)
+{
+	QDUMP("RESET");
+
+	/* disable interrupts */
+	gc_writel(priv, REG_GCIECR, 0);
+
+	/* reset hardware */
+	gc_writel(priv, REG_GCCR, GCCR_ABORT);
+	gc_writel(priv, REG_GCCR, 0);
+
+	memset(priv->shared, 0, SHARED_SIZE);
+	priv->shared->buffer_phys = priv->shared_phys;
+	priv->shared->magic = PXA3XX_GCU_SHARED_MAGIC;
+
+	do_gettimeofday(&priv->base_time);
+
+	/* set up the ring buffer pointers */
+	gc_writel(priv, REG_GCRBLR, 0);
+	gc_writel(priv, REG_GCRBBR, priv->shared_phys);
+	gc_writel(priv, REG_GCRBTR, priv->shared_phys);
+
+	/* enable all IRQs except EOB */
+	gc_writel(priv, REG_GCIECR, IE_ALL & ~IE_EOB);
+}
+
+static void
+dump_whole_state(struct pxa3xx_gcu_priv *priv)
+{
+	struct pxa3xx_gcu_shared *sh = priv->shared;
+	u32 base = gc_readl(priv, REG_GCRBBR);
+
+	QDUMP("DUMP");
+
+	printk(KERN_DEBUG "== PXA3XX-GCU DUMP ==\n"
+		"%s, STATUS 0x%02lx, B 0x%08lx [%ld], E %5ld, H %5ld, T %5ld\n",
+		sh->hw_running ? "running" : "idle   ",
+		gc_readl(priv, REG_GCISCR),
+		gc_readl(priv, REG_GCRBBR),
+		gc_readl(priv, REG_GCRBLR),
+		(gc_readl(priv, REG_GCRBEXHR) - base) / 4,
+		(gc_readl(priv, REG_GCRBHR) - base) / 4,
+		(gc_readl(priv, REG_GCRBTR) - base) / 4);
+}
+
+static void
+flush_running(struct pxa3xx_gcu_priv *priv)
+{
+	struct pxa3xx_gcu_batch *running = priv->running;
+	struct pxa3xx_gcu_batch *next;
+
+	while (running) {
+		next = running->next;
+		running->next = priv->free;
+		priv->free = running;
+		running = next;
+	}
+
+	priv->running = NULL;
+}
+
+static void
+run_ready(struct pxa3xx_gcu_priv *priv)
+{
+	unsigned int num = 0;
+	struct pxa3xx_gcu_shared *shared = priv->shared;
+	struct pxa3xx_gcu_batch	*ready = priv->ready;
+
+	QDUMP("Start");
+
+	BUG_ON(!ready);
+
+	shared->buffer[num++] = 0x05000000;
+
+	while (ready) {
+		shared->buffer[num++] = 0x00000001;
+		shared->buffer[num++] = ready->phys;
+		ready = ready->next;
+	}
+
+	shared->buffer[num++] = 0x05000000;
+	priv->running = priv->ready;
+	priv->ready = priv->ready_last = NULL;
+	gc_writel(priv, REG_GCRBLR, 0);
+	shared->hw_running = 1;
+
+	/* ring base address */
+	gc_writel(priv, REG_GCRBBR, shared->buffer_phys);
+
+	/* ring tail address */
+	gc_writel(priv, REG_GCRBTR, shared->buffer_phys + num * 4);
+
+	/* ring length */
+	gc_writel(priv, REG_GCRBLR, ((num + 63) & ~63) * 4);
+}
+
+static irqreturn_t
+pxa3xx_gcu_handle_irq(int irq, void *ctx)
+{
+	struct pxa3xx_gcu_priv *priv = ctx;
+	struct pxa3xx_gcu_shared *shared = priv->shared;
+	u32 status = gc_readl(priv, REG_GCISCR) & IE_ALL;
+
+	QDUMP("-Interrupt");
+
+	if (!status)
+		return IRQ_NONE;
+
+	spin_lock(&priv->spinlock);
+	shared->num_interrupts++;
+
+	if (status & IE_EEOB) {
+		QDUMP(" [EEOB]");
+
+		flush_running(priv);
+		wake_up_all(&priv->wait_free);
+
+		if (priv->ready) {
+			run_ready(priv);
+		} else {
+			/* There is no more data prepared by the userspace.
+			 * Set hw_running = 0 and wait for the next userspace
+			 * kick-off */
+			shared->num_idle++;
+			shared->hw_running = 0;
+
+			QDUMP(" '-> Idle.");
+
+			/* set ring buffer length to zero */
+			gc_writel(priv, REG_GCRBLR, 0);
+
+			wake_up_all(&priv->wait_idle);
+		}
+
+		shared->num_done++;
+	} else {
+		QERROR(" [???]");
+		dump_whole_state(priv);
+	}
+
+	/* Clear the interrupt */
+	gc_writel(priv, REG_GCISCR, status);
+	spin_unlock(&priv->spinlock);
+
+	return IRQ_HANDLED;
+}
+
+static int
+pxa3xx_gcu_wait_idle(struct pxa3xx_gcu_priv *priv)
+{
+	int ret = 0;
+
+	QDUMP("Waiting for idle...");
+
+	/* Does not need to be atomic. There's a lock in user space,
+	 * but anyhow, this is just for statistics. */
+	priv->shared->num_wait_idle++;
+
+	while (priv->shared->hw_running) {
+		int num = priv->shared->num_interrupts;
+		u32 rbexhr = gc_readl(priv, REG_GCRBEXHR);
+
+		ret = wait_event_interruptible_timeout(priv->wait_idle,
+					!priv->shared->hw_running, HZ*4);
+
+		if (ret < 0)
+			break;
+
+		if (ret > 0)
+			continue;
+
+		if (gc_readl(priv, REG_GCRBEXHR) == rbexhr &&
+		    priv->shared->num_interrupts == num) {
+			QERROR("TIMEOUT");
+			ret = -ETIMEDOUT;
+			break;
+		}
+	}
+
+	QDUMP("done");
+
+	return ret;
+}
+
+static int
+pxa3xx_gcu_wait_free(struct pxa3xx_gcu_priv *priv)
+{
+	int ret = 0;
+
+	QDUMP("Waiting for free...");
+
+	/* Does not need to be atomic. There's a lock in user space,
+	 * but anyhow, this is just for statistics. */
+	priv->shared->num_wait_free++;
+
+	while (!priv->free) {
+		u32 rbexhr = gc_readl(priv, REG_GCRBEXHR);
+
+		ret = wait_event_interruptible_timeout(priv->wait_free,
+						       priv->free, HZ*4);
+
+		if (ret < 0)
+			break;
+
+		if (ret > 0)
+			continue;
+
+		if (gc_readl(priv, REG_GCRBEXHR) == rbexhr) {
+			QERROR("TIMEOUT");
+			ret = -ETIMEDOUT;
+			break;
+		}
+	}
+
+	QDUMP("done");
+
+	return ret;
+}
+
+/* Misc device layer */
+
+static ssize_t
+pxa3xx_gcu_misc_write(struct file *filp, const char *buff,
+		      size_t count, loff_t *offp)
+{
+	int ret;
+	unsigned long flags;
+	struct pxa3xx_gcu_batch	*buffer;
+	struct pxa3xx_gcu_priv *priv =
+		container_of(filp->f_op, struct pxa3xx_gcu_priv, misc_fops);
+
+	int words = count / 4;
+
+	/* Does not need to be atomic. There's a lock in user space,
+	 * but anyhow, this is just for statistics. */
+	priv->shared->num_writes++;
+
+	priv->shared->num_words += words;
+
+	/* Last word reserved for batch buffer end command */
+	if (words >= PXA3XX_GCU_BATCH_WORDS)
+		return -E2BIG;
+
+	/* Wait for a free buffer */
+	if (!priv->free) {
+		ret = pxa3xx_gcu_wait_free(priv);
+		if (ret < 0)
+			return ret;
+	}
+
+	/*
+	 * Get buffer from free list
+	 */
+	spin_lock_irqsave(&priv->spinlock, flags);
+
+	buffer = priv->free;
+	priv->free = buffer->next;
+
+	spin_unlock_irqrestore(&priv->spinlock, flags);
+
+
+	/* Copy data from user into buffer */
+	ret = copy_from_user(buffer->ptr, buff, words * 4);
+	if (ret) {
+		spin_lock_irqsave(&priv->spinlock, flags);
+		buffer->next = priv->free;
+		priv->free = buffer;
+		spin_unlock_irqrestore(&priv->spinlock, flags);
+		return ret;
+	}
+
+	buffer->length = words;
+
+	/* Append batch buffer end command */
+	buffer->ptr[words] = 0x01000000;
+
+	/*
+	 * Add buffer to ready list
+	 */
+	spin_lock_irqsave(&priv->spinlock, flags);
+
+	buffer->next = NULL;
+
+	if (priv->ready) {
+		BUG_ON(priv->ready_last == NULL);
+
+		priv->ready_last->next = buffer;
+	} else
+		priv->ready = buffer;
+
+	priv->ready_last = buffer;
+
+	if (!priv->shared->hw_running)
+		run_ready(priv);
+
+	spin_unlock_irqrestore(&priv->spinlock, flags);
+
+	return words * 4;
+}
+
+
+static long
+pxa3xx_gcu_misc_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
+{
+	unsigned long flags;
+	struct pxa3xx_gcu_priv *priv =
+		container_of(filp->f_op, struct pxa3xx_gcu_priv, misc_fops);
+
+	switch (cmd) {
+	case PXA3XX_GCU_IOCTL_RESET:
+		spin_lock_irqsave(&priv->spinlock, flags);
+		pxa3xx_gcu_reset(priv);
+		spin_unlock_irqrestore(&priv->spinlock, flags);
+		return 0;
+
+	case PXA3XX_GCU_IOCTL_WAIT_IDLE:
+		return pxa3xx_gcu_wait_idle(priv);
+	}
+
+	return -ENOSYS;
+}
+
+static int
+pxa3xx_gcu_misc_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+	unsigned int size = vma->vm_end - vma->vm_start;
+	struct pxa3xx_gcu_priv *priv =
+		container_of(filp->f_op, struct pxa3xx_gcu_priv, misc_fops);
+
+	switch (vma->vm_pgoff) {
+	case 0:
+		/* hand out the shared data area */
+		if (size != SHARED_SIZE)
+			return -EINVAL;
+
+		return dma_mmap_coherent(NULL, vma,
+			priv->shared, priv->shared_phys, size);
+
+	case SHARED_SIZE >> PAGE_SHIFT:
+		/* hand out the MMIO base for direct register access
+		 * from userspace */
+		if (size != resource_size(priv->resource_mem))
+			return -EINVAL;
+
+		vma->vm_flags |= VM_IO;
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+		return io_remap_pfn_range(vma, vma->vm_start,
+				priv->resource_mem->start >> PAGE_SHIFT,
+				size, vma->vm_page_prot);
+	}
+
+	return -EINVAL;
+}
+
+
+#ifdef PXA3XX_GCU_DEBUG_TIMER
+static struct timer_list pxa3xx_gcu_debug_timer;
+
+static void pxa3xx_gcu_debug_timedout(unsigned long ptr)
+{
+	struct pxa3xx_gcu_priv *priv = (struct pxa3xx_gcu_priv *) ptr;
+
+	QERROR("Timer DUMP");
+
+	/* init the timer structure */
+	init_timer(&pxa3xx_gcu_debug_timer);
+	pxa3xx_gcu_debug_timer.function = pxa3xx_gcu_debug_timedout;
+	pxa3xx_gcu_debug_timer.data = ptr;
+	pxa3xx_gcu_debug_timer.expires = jiffies + 5*HZ; /* one second */
+
+	add_timer(&pxa3xx_gcu_debug_timer);
+}
+
+static void pxa3xx_gcu_init_debug_timer(void)
+{
+	pxa3xx_gcu_debug_timedout((unsigned long) &pxa3xx_gcu_debug_timer);
+}
+#else
+static inline void pxa3xx_gcu_init_debug_timer(void) {}
+#endif
+
+static int
+add_buffer(struct platform_device *dev,
+	   struct pxa3xx_gcu_priv *priv)
+{
+	struct pxa3xx_gcu_batch *buffer;
+
+	buffer = kzalloc(sizeof(struct pxa3xx_gcu_batch), GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	buffer->ptr = dma_alloc_coherent(&dev->dev, PXA3XX_GCU_BATCH_WORDS * 4,
+					 &buffer->phys, GFP_KERNEL);
+	if (!buffer->ptr) {
+		kfree(buffer);
+		return -ENOMEM;
+	}
+
+	buffer->next = priv->free;
+
+	priv->free = buffer;
+
+	return 0;
+}
+
+static void
+free_buffers(struct platform_device *dev,
+	     struct pxa3xx_gcu_priv *priv)
+{
+	struct pxa3xx_gcu_batch *next, *buffer = priv->free;
+
+	while (buffer) {
+		next = buffer->next;
+
+		dma_free_coherent(&dev->dev, PXA3XX_GCU_BATCH_WORDS * 4,
+				  buffer->ptr, buffer->phys);
+
+		kfree(buffer);
+
+		buffer = next;
+	}
+
+	priv->free = NULL;
+}
+
+static int __devinit
+pxa3xx_gcu_probe(struct platform_device *dev)
+{
+	int i, ret, irq;
+	struct resource *r;
+	struct pxa3xx_gcu_priv *priv;
+
+	priv = kzalloc(sizeof(struct pxa3xx_gcu_priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	for (i = 0; i < 8; i++) {
+		ret = add_buffer(dev, priv);
+		if (ret) {
+			dev_err(&dev->dev, "failed to allocate DMA memory\n");
+			goto err_free_priv;
+		}
+	}
+
+	init_waitqueue_head(&priv->wait_idle);
+	init_waitqueue_head(&priv->wait_free);
+	spin_lock_init(&priv->spinlock);
+
+	/* we allocate the misc device structure as part of our own allocation,
+	 * so we can get a pointer to our priv structure later on with
+	 * container_of(). This isn't really necessary as we have a fixed minor
+	 * number anyway, but this is to avoid statics. */
+
+	priv->misc_fops.owner	= THIS_MODULE;
+	priv->misc_fops.write	= pxa3xx_gcu_misc_write;
+	priv->misc_fops.unlocked_ioctl = pxa3xx_gcu_misc_ioctl;
+	priv->misc_fops.mmap	= pxa3xx_gcu_misc_mmap;
+
+	priv->misc_dev.minor	= MISCDEV_MINOR,
+	priv->misc_dev.name	= DRV_NAME,
+	priv->misc_dev.fops	= &priv->misc_fops,
+
+	/* register misc device */
+	ret = misc_register(&priv->misc_dev);
+	if (ret < 0) {
+		dev_err(&dev->dev, "misc_register() for minor %d failed\n",
+			MISCDEV_MINOR);
+		goto err_free_priv;
+	}
+
+	/* handle IO resources */
+	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&dev->dev, "no I/O memory resource defined\n");
+		ret = -ENODEV;
+		goto err_misc_deregister;
+	}
+
+	if (!request_mem_region(r->start, resource_size(r), dev->name)) {
+		dev_err(&dev->dev, "failed to request I/O memory\n");
+		ret = -EBUSY;
+		goto err_misc_deregister;
+	}
+
+	priv->mmio_base = ioremap_nocache(r->start, resource_size(r));
+	if (!priv->mmio_base) {
+		dev_err(&dev->dev, "failed to map I/O memory\n");
+		ret = -EBUSY;
+		goto err_free_mem_region;
+	}
+
+	/* allocate dma memory */
+	priv->shared = dma_alloc_coherent(&dev->dev, SHARED_SIZE,
+					  &priv->shared_phys, GFP_KERNEL);
+
+	if (!priv->shared) {
+		dev_err(&dev->dev, "failed to allocate DMA memory\n");
+		ret = -ENOMEM;
+		goto err_free_io;
+	}
+
+	/* enable the clock */
+	priv->clk = clk_get(&dev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(&dev->dev, "failed to get clock\n");
+		ret = -ENODEV;
+		goto err_free_dma;
+	}
+
+	ret = clk_enable(priv->clk);
+	if (ret < 0) {
+		dev_err(&dev->dev, "failed to enable clock\n");
+		goto err_put_clk;
+	}
+
+	/* request the IRQ */
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0) {
+		dev_err(&dev->dev, "no IRQ defined\n");
+		ret = -ENODEV;
+		goto err_put_clk;
+	}
+
+	ret = request_irq(irq, pxa3xx_gcu_handle_irq,
+			  IRQF_DISABLED, DRV_NAME, priv);
+	if (ret) {
+		dev_err(&dev->dev, "request_irq failed\n");
+		ret = -EBUSY;
+		goto err_put_clk;
+	}
+
+	platform_set_drvdata(dev, priv);
+	priv->resource_mem = r;
+	pxa3xx_gcu_reset(priv);
+	pxa3xx_gcu_init_debug_timer();
+
+	dev_info(&dev->dev, "registered @0x%p, DMA 0x%p (%d bytes), IRQ %d\n",
+			(void *) r->start, (void *) priv->shared_phys,
+			SHARED_SIZE, irq);
+	return 0;
+
+err_put_clk:
+	clk_disable(priv->clk);
+	clk_put(priv->clk);
+
+err_free_dma:
+	dma_free_coherent(&dev->dev, SHARED_SIZE,
+			priv->shared, priv->shared_phys);
+
+err_free_io:
+	iounmap(priv->mmio_base);
+
+err_free_mem_region:
+	release_mem_region(r->start, resource_size(r));
+
+err_misc_deregister:
+	misc_deregister(&priv->misc_dev);
+
+err_free_priv:
+	platform_set_drvdata(dev, NULL);
+	free_buffers(dev, priv);
+	kfree(priv);
+	return ret;
+}
+
+static int __devexit
+pxa3xx_gcu_remove(struct platform_device *dev)
+{
+	struct pxa3xx_gcu_priv *priv = platform_get_drvdata(dev);
+	struct resource *r = priv->resource_mem;
+
+	pxa3xx_gcu_wait_idle(priv);
+
+	misc_deregister(&priv->misc_dev);
+	dma_free_coherent(&dev->dev, SHARED_SIZE,
+			priv->shared, priv->shared_phys);
+	iounmap(priv->mmio_base);
+	release_mem_region(r->start, resource_size(r));
+	platform_set_drvdata(dev, NULL);
+	clk_disable(priv->clk);
+	free_buffers(dev, priv);
+	kfree(priv);
+
+	return 0;
+}
+
+static struct platform_driver pxa3xx_gcu_driver = {
+	.probe	  = pxa3xx_gcu_probe,
+	.remove	 = __devexit_p(pxa3xx_gcu_remove),
+	.driver	 = {
+		.owner  = THIS_MODULE,
+		.name   = DRV_NAME,
+	},
+};
+
+static int __init
+pxa3xx_gcu_init(void)
+{
+	return platform_driver_register(&pxa3xx_gcu_driver);
+}
+
+static void __exit
+pxa3xx_gcu_exit(void)
+{
+	platform_driver_unregister(&pxa3xx_gcu_driver);
+}
+
+module_init(pxa3xx_gcu_init);
+module_exit(pxa3xx_gcu_exit);
+
+MODULE_DESCRIPTION("PXA3xx graphics controller unit driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(MISCDEV_MINOR);
+MODULE_AUTHOR("Janine Kropp <nin@directfb.org>, "
+		"Denis Oliver Kropp <dok@directfb.org>, "
+		"Daniel Mack <daniel@caiaq.de>");
diff --git a/drivers/video/pxa3xx-gcu.h b/drivers/video/pxa3xx-gcu.h
new file mode 100644
index 00000000000..0428ed03dc4
--- /dev/null
+++ b/drivers/video/pxa3xx-gcu.h
@@ -0,0 +1,38 @@
+#ifndef __PXA3XX_GCU_H__
+#define __PXA3XX_GCU_H__
+
+#include <linux/types.h>
+
+/* Number of 32bit words in display list (ring buffer). */
+#define PXA3XX_GCU_BUFFER_WORDS  ((256 * 1024 - 256) / 4)
+
+/* To be increased when breaking the ABI */
+#define PXA3XX_GCU_SHARED_MAGIC  0x30000001
+
+#define PXA3XX_GCU_BATCH_WORDS   8192
+
+struct pxa3xx_gcu_shared {
+	u32            buffer[PXA3XX_GCU_BUFFER_WORDS];
+
+	bool           hw_running;
+
+	unsigned long  buffer_phys;
+
+	unsigned int   num_words;
+	unsigned int   num_writes;
+	unsigned int   num_done;
+	unsigned int   num_interrupts;
+	unsigned int   num_wait_idle;
+	unsigned int   num_wait_free;
+	unsigned int   num_idle;
+
+	u32            magic;
+};
+
+/* Initialization and synchronization.
+ * Hardware is started upon write(). */
+#define PXA3XX_GCU_IOCTL_RESET		_IO('G', 0)
+#define PXA3XX_GCU_IOCTL_WAIT_IDLE	_IO('G', 2)
+
+#endif /* __PXA3XX_GCU_H__ */
+
diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/riva/rivafb-i2c.c
index a0e22ac483a..167400e2a18 100644
--- a/drivers/video/riva/rivafb-i2c.c
+++ b/drivers/video/riva/rivafb-i2c.c
@@ -94,7 +94,6 @@ static int __devinit riva_setup_i2c_bus(struct riva_i2c_chan *chan,
 
 	strcpy(chan->adapter.name, name);
 	chan->adapter.owner		= THIS_MODULE;
-	chan->adapter.id		= I2C_HW_B_RIVA;
 	chan->adapter.class		= i2c_class;
 	chan->adapter.algo_data		= &chan->algo;
 	chan->adapter.dev.parent	= &chan->par->pdev->dev;
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/s1d13xxxfb.c
index a6247fc081a..28b1c6c3d8a 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/s1d13xxxfb.c
@@ -410,28 +410,6 @@ s1d13xxxfb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
  ************************************************************/
 
 /**
- *	bltbit_wait_bitset - waits for change in register value
- *	@info : framebuffer structure
- *	@bit  : value expected in register
- *	@timeout : ...
- *
- *	waits until value changes INTO bit
- */
-static u8
-bltbit_wait_bitset(struct fb_info *info, u8 bit, int timeout)
-{
-	while (!(s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0) & bit)) {
-		udelay(10);
-		if (!--timeout) {
-			dbg_blit("wait_bitset timeout\n");
-			break;
-		}
-	}
-
-	return timeout;
-}
-
-/**
  *	bltbit_wait_bitclear - waits for change in register value
  *	@info : frambuffer structure
  *	@bit  : value currently in register
@@ -454,34 +432,6 @@ bltbit_wait_bitclear(struct fb_info *info, u8 bit, int timeout)
 	return timeout;
 }
 
-/**
- *	bltbit_fifo_status - checks the current status of the fifo
- *	@info : framebuffer structure
- *
- *	returns number of free words in buffer
- */
-static u8
-bltbit_fifo_status(struct fb_info *info)
-{
-	u8 status;
-
-	status = s1d13xxxfb_readreg(info->par, S1DREG_BBLT_CTL0);
-
-	/* its empty so room for 16 words */
-	if (status & BBLT_FIFO_EMPTY)
-		return 16;
-
-	/* its full so we dont want to add */
-	if (status & BBLT_FIFO_FULL)
-		return 0;
-
-	/* its atleast half full but we can add one atleast */
-	if (status & BBLT_FIFO_NOT_FULL)
-		return 1;
-
-	return 0;
-}
-
 /*
  *	s1d13xxxfb_bitblt_copyarea - accelerated copyarea function
  *	@info : framebuffer structure
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index f9aca9d13d1..83ce9a04d87 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
 
 #include <mach/map.h>
 #include <plat/regs-fb-v4.h>
@@ -1013,8 +1014,30 @@ static int s3c_fb_ioctl(struct fb_info *info, unsigned int cmd,
 	return ret;
 }
 
+static int s3c_fb_open(struct fb_info *info, int user)
+{
+	struct s3c_fb_win *win = info->par;
+	struct s3c_fb *sfb = win->parent;
+
+	pm_runtime_get_sync(sfb->dev);
+
+	return 0;
+}
+
+static int s3c_fb_release(struct fb_info *info, int user)
+{
+	struct s3c_fb_win *win = info->par;
+	struct s3c_fb *sfb = win->parent;
+
+	pm_runtime_put_sync(sfb->dev);
+
+	return 0;
+}
+
 static struct fb_ops s3c_fb_ops = {
 	.owner		= THIS_MODULE,
+	.fb_open	= s3c_fb_open,
+	.fb_release	= s3c_fb_release,
 	.fb_check_var	= s3c_fb_check_var,
 	.fb_set_par	= s3c_fb_set_par,
 	.fb_blank	= s3c_fb_blank,
@@ -1322,6 +1345,8 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 
 	clk_enable(sfb->bus_clk);
 
+	pm_runtime_enable(sfb->dev);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "failed to find registers\n");
@@ -1360,6 +1385,9 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 
 	dev_dbg(dev, "got resources (regs %p), probing windows\n", sfb->regs);
 
+	platform_set_drvdata(pdev, sfb);
+	pm_runtime_get_sync(sfb->dev);
+
 	/* setup gpio and output polarity controls */
 
 	pd->setup_gpio();
@@ -1400,6 +1428,7 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, sfb);
+	pm_runtime_put_sync(sfb->dev);
 
 	return 0;
 
@@ -1434,6 +1463,8 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
 	struct s3c_fb *sfb = platform_get_drvdata(pdev);
 	int win;
 
+	pm_runtime_get_sync(sfb->dev);
+
 	for (win = 0; win < S3C_FB_MAX_WIN; win++)
 		if (sfb->windows[win])
 			s3c_fb_release_win(sfb, sfb->windows[win]);
@@ -1450,12 +1481,74 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
 
 	kfree(sfb);
 
+	pm_runtime_put_sync(sfb->dev);
+	pm_runtime_disable(sfb->dev);
+
 	return 0;
 }
 
 #ifdef CONFIG_PM
-static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state)
+static int s3c_fb_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c_fb *sfb = platform_get_drvdata(pdev);
+	struct s3c_fb_win *win;
+	int win_no;
+
+	for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
+		win = sfb->windows[win_no];
+		if (!win)
+			continue;
+
+		/* use the blank function to push into power-down */
+		s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo);
+	}
+
+	clk_disable(sfb->bus_clk);
+	return 0;
+}
+
+static int s3c_fb_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c_fb *sfb = platform_get_drvdata(pdev);
+	struct s3c_fb_platdata *pd = sfb->pdata;
+	struct s3c_fb_win *win;
+	int win_no;
+
+	clk_enable(sfb->bus_clk);
+
+	/* setup registers */
+	writel(pd->vidcon1, sfb->regs + VIDCON1);
+
+	/* zero all windows before we do anything */
+	for (win_no = 0; win_no < sfb->variant.nr_windows; win_no++)
+		s3c_fb_clear_win(sfb, win_no);
+
+	for (win_no = 0; win_no < sfb->variant.nr_windows - 1; win_no++) {
+		void __iomem *regs = sfb->regs + sfb->variant.keycon;
+
+		regs += (win_no * 8);
+		writel(0xffffff, regs + WKEYCON0);
+		writel(0xffffff, regs + WKEYCON1);
+	}
+
+	/* restore framebuffers */
+	for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
+		win = sfb->windows[win_no];
+		if (!win)
+			continue;
+
+		dev_dbg(&pdev->dev, "resuming window %d\n", win_no);
+		s3c_fb_set_par(win->fbinfo);
+	}
+
+	return 0;
+}
+
+int s3c_fb_runtime_suspend(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct s3c_fb *sfb = platform_get_drvdata(pdev);
 	struct s3c_fb_win *win;
 	int win_no;
@@ -1473,8 +1566,9 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state)
 	return 0;
 }
 
-static int s3c_fb_resume(struct platform_device *pdev)
+int s3c_fb_runtime_resume(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct s3c_fb *sfb = platform_get_drvdata(pdev);
 	struct s3c_fb_platdata *pd = sfb->pdata;
 	struct s3c_fb_win *win;
@@ -1509,9 +1603,12 @@ static int s3c_fb_resume(struct platform_device *pdev)
 
 	return 0;
 }
+
 #else
 #define s3c_fb_suspend NULL
 #define s3c_fb_resume  NULL
+#define s3c_fb_runtime_suspend NULL
+#define s3c_fb_runtime_resume NULL
 #endif
 
 
@@ -1710,15 +1807,21 @@ static struct platform_device_id s3c_fb_driver_ids[] = {
 };
 MODULE_DEVICE_TABLE(platform, s3c_fb_driver_ids);
 
+static const struct dev_pm_ops s3cfb_pm_ops = {
+	.suspend	= s3c_fb_suspend,
+	.resume		= s3c_fb_resume,
+	.runtime_suspend	= s3c_fb_runtime_suspend,
+	.runtime_resume		= s3c_fb_runtime_resume,
+};
+
 static struct platform_driver s3c_fb_driver = {
 	.probe		= s3c_fb_probe,
 	.remove		= __devexit_p(s3c_fb_remove),
-	.suspend	= s3c_fb_suspend,
-	.resume		= s3c_fb_resume,
 	.id_table	= s3c_fb_driver_ids,
 	.driver		= {
 		.name	= "s3c-fb",
 		.owner	= THIS_MODULE,
+		.pm	= &s3cfb_pm_ops,
 	},
 };
 
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/sh_mipi_dsi.c
index 3f3d431033c..24640c8458a 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/sh_mipi_dsi.c
@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/types.h>
@@ -21,18 +22,40 @@
 #include <video/sh_mipi_dsi.h>
 #include <video/sh_mobile_lcdc.h>
 
-#define CMTSRTCTR	0x80d0
-#define CMTSRTREQ	0x8070
-
+#define SYSCTRL		0x0000
+#define SYSCONF		0x0004
+#define TIMSET		0x0008
+#define RESREQSET0	0x0018
+#define RESREQSET1	0x001c
+#define HSTTOVSET	0x0020
+#define LPRTOVSET	0x0024
+#define TATOVSET	0x0028
+#define PRTOVSET	0x002c
+#define DSICTRL		0x0030
 #define DSIINTE		0x0060
+#define PHYCTRL		0x0070
+
+/* relative to linkbase */
+#define DTCTR		0x0000
+#define VMCTR1		0x0020
+#define VMCTR2		0x0024
+#define VMLEN1		0x0028
+#define CMTSRTREQ	0x0070
+#define CMTSRTCTR	0x00d0
 
 /* E.g., sh7372 has 2 MIPI-DSIs - one for each LCDC */
 #define MAX_SH_MIPI_DSI 2
 
 struct sh_mipi {
 	void __iomem	*base;
+	void __iomem	*linkbase;
 	struct clk	*dsit_clk;
 	struct clk	*dsip_clk;
+	struct device	*dev;
+
+	void	*next_board_data;
+	void	(*next_display_on)(void *board_data, struct fb_info *info);
+	void	(*next_display_off)(void *board_data);
 };
 
 static struct sh_mipi *mipi_dsi[MAX_SH_MIPI_DSI];
@@ -55,10 +78,10 @@ static int sh_mipi_send_short(struct sh_mipi *mipi, u8 dsi_cmd,
 	int cnt = 100;
 
 	/* transmit a short packet to LCD panel */
-	iowrite32(1 | data, mipi->base + 0x80d0); /* CMTSRTCTR */
-	iowrite32(1, mipi->base + 0x8070); /* CMTSRTREQ */
+	iowrite32(1 | data, mipi->linkbase + CMTSRTCTR);
+	iowrite32(1, mipi->linkbase + CMTSRTREQ);
 
-	while ((ioread32(mipi->base + 0x8070) & 1) && --cnt)
+	while ((ioread32(mipi->linkbase + CMTSRTREQ) & 1) && --cnt)
 		udelay(1);
 
 	return cnt ? 0 : -ETIMEDOUT;
@@ -90,7 +113,7 @@ static void sh_mipi_dsi_enable(struct sh_mipi *mipi, bool enable)
 	 * enable LCDC data tx, transition to LPS after completion of each HS
 	 * packet
 	 */
-	iowrite32(0x00000002 | enable, mipi->base + 0x8000); /* DTCTR */
+	iowrite32(0x00000002 | enable, mipi->linkbase + DTCTR);
 }
 
 static void sh_mipi_shutdown(struct platform_device *pdev)
@@ -104,14 +127,22 @@ static void mipi_display_on(void *arg, struct fb_info *info)
 {
 	struct sh_mipi *mipi = arg;
 
+	pm_runtime_get_sync(mipi->dev);
 	sh_mipi_dsi_enable(mipi, true);
+
+	if (mipi->next_display_on)
+		mipi->next_display_on(mipi->next_board_data, info);
 }
 
 static void mipi_display_off(void *arg)
 {
 	struct sh_mipi *mipi = arg;
 
+	if (mipi->next_display_off)
+		mipi->next_display_off(mipi->next_board_data);
+
 	sh_mipi_dsi_enable(mipi, false);
+	pm_runtime_put(mipi->dev);
 }
 
 static int __init sh_mipi_setup(struct sh_mipi *mipi,
@@ -119,8 +150,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 {
 	void __iomem *base = mipi->base;
 	struct sh_mobile_lcdc_chan_cfg *ch = pdata->lcd_chan;
-	u32 pctype, datatype, pixfmt;
-	u32 linelength;
+	u32 pctype, datatype, pixfmt, linelength, vmctr2 = 0x00e00000;
 	bool yuv;
 
 	/*
@@ -223,10 +253,10 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 		return -EINVAL;
 
 	/* reset DSI link */
-	iowrite32(0x00000001, base); /* SYSCTRL */
+	iowrite32(0x00000001, base + SYSCTRL);
 	/* Hold reset for 100 cycles of the slowest of bus, HS byte and LP clock */
 	udelay(50);
-	iowrite32(0x00000000, base); /* SYSCTRL */
+	iowrite32(0x00000000, base + SYSCTRL);
 
 	/* setup DSI link */
 
@@ -238,7 +268,7 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 	 *	ECC check enable
 	 * additionally enable first two lanes
 	 */
-	iowrite32(0x00003703, base + 0x04); /* SYSCONF */
+	iowrite32(0x00003703, base + SYSCONF);
 	/*
 	 * T_wakeup = 0x7000
 	 * T_hs-trail = 3
@@ -246,28 +276,28 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 	 * T_clk-trail = 3
 	 * T_clk-prepare = 2
 	 */
-	iowrite32(0x70003332, base + 0x08); /* TIMSET */
+	iowrite32(0x70003332, base + TIMSET);
 	/* no responses requested */
-	iowrite32(0x00000000, base + 0x18); /* RESREQSET0 */
+	iowrite32(0x00000000, base + RESREQSET0);
 	/* request response to packets of type 0x28 */
-	iowrite32(0x00000100, base + 0x1c); /* RESREQSET1 */
+	iowrite32(0x00000100, base + RESREQSET1);
 	/* High-speed transmission timeout, default 0xffffffff */
-	iowrite32(0x0fffffff, base + 0x20); /* HSTTOVSET */
+	iowrite32(0x0fffffff, base + HSTTOVSET);
 	/* LP reception timeout, default 0xffffffff */
-	iowrite32(0x0fffffff, base + 0x24); /* LPRTOVSET */
+	iowrite32(0x0fffffff, base + LPRTOVSET);
 	/* Turn-around timeout, default 0xffffffff */
-	iowrite32(0x0fffffff, base + 0x28); /* TATOVSET */
+	iowrite32(0x0fffffff, base + TATOVSET);
 	/* Peripheral reset timeout, default 0xffffffff */
-	iowrite32(0x0fffffff, base + 0x2c); /* PRTOVSET */
+	iowrite32(0x0fffffff, base + PRTOVSET);
 	/* Enable timeout counters */
-	iowrite32(0x00000f00, base + 0x30); /* DSICTRL */
+	iowrite32(0x00000f00, base + DSICTRL);
 	/* Interrupts not used, disable all */
 	iowrite32(0, base + DSIINTE);
 	/* DSI-Tx bias on */
-	iowrite32(0x00000001, base + 0x70); /* PHYCTRL */
+	iowrite32(0x00000001, base + PHYCTRL);
 	udelay(200);
 	/* Deassert resets, power on, set multiplier */
-	iowrite32(0x03070b01, base + 0x70); /* PHYCTRL */
+	iowrite32(0x03070b01, base + PHYCTRL);
 
 	/* setup l-bridge */
 
@@ -275,20 +305,28 @@ static int __init sh_mipi_setup(struct sh_mipi *mipi,
 	 * Enable transmission of all packets,
 	 * transmit LPS after each HS packet completion
 	 */
-	iowrite32(0x00000006, base + 0x8000); /* DTCTR */
+	iowrite32(0x00000006, mipi->linkbase + DTCTR);
 	/* VSYNC width = 2 (<< 17) */
-	iowrite32(0x00040000 | (pctype << 12) | datatype, base + 0x8020); /* VMCTR1 */
+	iowrite32((ch->lcd_cfg[0].vsync_len << pdata->vsynw_offset) |
+		  (pdata->clksrc << 16) | (pctype << 12) | datatype,
+		  mipi->linkbase + VMCTR1);
+
 	/*
 	 * Non-burst mode with sync pulses: VSE and HSE are output,
 	 * HSA period allowed, no commands in LP
 	 */
-	iowrite32(0x00e00000, base + 0x8024); /* VMCTR2 */
+	if (pdata->flags & SH_MIPI_DSI_HSABM)
+		vmctr2 |= 0x20;
+	if (pdata->flags & SH_MIPI_DSI_HSPBM)
+		vmctr2 |= 0x10;
+	iowrite32(vmctr2, mipi->linkbase + VMCTR2);
+
 	/*
 	 * 0x660 = 1632 bytes per line (RGB24, 544 pixels: see
 	 * sh_mobile_lcdc_info.ch[0].lcd_cfg[0].xres), HSALEN = 1 - default
-	 * (unused, since VMCTR2[HSABM] = 0)
+	 * (unused if VMCTR2[HSABM] = 0)
 	 */
-	iowrite32(1 | (linelength << 16), base + 0x8028); /* VMLEN1 */
+	iowrite32(1 | (linelength << 16), mipi->linkbase + VMLEN1);
 
 	msleep(5);
 
@@ -321,11 +359,12 @@ static int __init sh_mipi_probe(struct platform_device *pdev)
 	struct sh_mipi *mipi;
 	struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct resource *res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	unsigned long rate, f_current;
 	int idx = pdev->id, ret;
 	char dsip_clk[] = "dsi.p_clk";
 
-	if (!res || idx >= ARRAY_SIZE(mipi_dsi) || !pdata)
+	if (!res || !res2 || idx >= ARRAY_SIZE(mipi_dsi) || !pdata)
 		return -ENODEV;
 
 	mutex_lock(&array_lock);
@@ -356,6 +395,20 @@ static int __init sh_mipi_probe(struct platform_device *pdev)
 		goto emap;
 	}
 
+	if (!request_mem_region(res2->start, resource_size(res2), pdev->name)) {
+		dev_err(&pdev->dev, "MIPI register region 2 already claimed\n");
+		ret = -EBUSY;
+		goto ereqreg2;
+	}
+
+	mipi->linkbase = ioremap(res2->start, resource_size(res2));
+	if (!mipi->linkbase) {
+		ret = -ENOMEM;
+		goto emap2;
+	}
+
+	mipi->dev = &pdev->dev;
+
 	mipi->dsit_clk = clk_get(&pdev->dev, "dsit_clk");
 	if (IS_ERR(mipi->dsit_clk)) {
 		ret = PTR_ERR(mipi->dsit_clk);
@@ -405,6 +458,9 @@ static int __init sh_mipi_probe(struct platform_device *pdev)
 
 	mipi_dsi[idx] = mipi;
 
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_resume(&pdev->dev);
+
 	ret = sh_mipi_setup(mipi, pdata);
 	if (ret < 0)
 		goto emipisetup;
@@ -412,15 +468,22 @@ static int __init sh_mipi_probe(struct platform_device *pdev)
 	mutex_unlock(&array_lock);
 	platform_set_drvdata(pdev, mipi);
 
+	/* Save original LCDC callbacks */
+	mipi->next_board_data = pdata->lcd_chan->board_cfg.board_data;
+	mipi->next_display_on = pdata->lcd_chan->board_cfg.display_on;
+	mipi->next_display_off = pdata->lcd_chan->board_cfg.display_off;
+
 	/* Set up LCDC callbacks */
 	pdata->lcd_chan->board_cfg.board_data = mipi;
 	pdata->lcd_chan->board_cfg.display_on = mipi_display_on;
 	pdata->lcd_chan->board_cfg.display_off = mipi_display_off;
+	pdata->lcd_chan->board_cfg.owner = THIS_MODULE;
 
 	return 0;
 
 emipisetup:
 	mipi_dsi[idx] = NULL;
+	pm_runtime_disable(&pdev->dev);
 	clk_disable(mipi->dsip_clk);
 eclkpon:
 	clk_disable(mipi->dsit_clk);
@@ -431,6 +494,10 @@ eclkpget:
 esettrate:
 	clk_put(mipi->dsit_clk);
 eclktget:
+	iounmap(mipi->linkbase);
+emap2:
+	release_mem_region(res2->start, resource_size(res2));
+ereqreg2:
 	iounmap(mipi->base);
 emap:
 	release_mem_region(res->start, resource_size(res));
@@ -447,6 +514,7 @@ static int __exit sh_mipi_remove(struct platform_device *pdev)
 {
 	struct sh_mipi_dsi_info *pdata = pdev->dev.platform_data;
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct resource *res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	struct sh_mipi *mipi = platform_get_drvdata(pdev);
 	int i, ret;
 
@@ -467,14 +535,19 @@ static int __exit sh_mipi_remove(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
+	pdata->lcd_chan->board_cfg.owner = NULL;
 	pdata->lcd_chan->board_cfg.display_on = NULL;
 	pdata->lcd_chan->board_cfg.display_off = NULL;
 	pdata->lcd_chan->board_cfg.board_data = NULL;
 
+	pm_runtime_disable(&pdev->dev);
 	clk_disable(mipi->dsip_clk);
 	clk_disable(mipi->dsit_clk);
 	clk_put(mipi->dsit_clk);
 	clk_put(mipi->dsip_clk);
+	iounmap(mipi->linkbase);
+	if (res2)
+		release_mem_region(res2->start, resource_size(res2));
 	iounmap(mipi->base);
 	if (res)
 		release_mem_region(res->start, resource_size(res));
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/sh_mobile_hdmi.c
index 55b3077ff6f..8c59cc8c5a9 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/sh_mobile_hdmi.c
@@ -209,7 +209,11 @@ enum hotplug_state {
 struct sh_hdmi {
 	void __iomem *base;
 	enum hotplug_state hp_state;	/* hot-plug status */
-	bool preprogrammed_mode;	/* use a pre-programmed VIC or the external mode */
+	u8 preprogrammed_vic;		/* use a pre-programmed VIC or
+					   the external mode */
+	u8 edid_block_addr;
+	u8 edid_segment_nr;
+	u8 edid_blocks;
 	struct clk *hdmi_clk;
 	struct device *dev;
 	struct fb_info *info;
@@ -342,7 +346,7 @@ static void sh_hdmi_external_video_param(struct sh_hdmi *hdmi)
 	hdmi_write(hdmi, var->vsync_len, HDMI_EXTERNAL_V_DURATION);
 
 	/* Set bit 0 of HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS here for external mode */
-	if (!hdmi->preprogrammed_mode)
+	if (!hdmi->preprogrammed_vic)
 		hdmi_write(hdmi, sync | 1 | (voffset << 4),
 			   HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS);
 }
@@ -466,7 +470,18 @@ static void sh_hdmi_audio_config(struct sh_hdmi *hdmi)
  */
 static void sh_hdmi_phy_config(struct sh_hdmi *hdmi)
 {
-	if (hdmi->var.yres > 480) {
+	if (hdmi->var.pixclock < 10000) {
+		/* for 1080p8bit 148MHz */
+		hdmi_write(hdmi, 0x1d, HDMI_SLIPHDMIT_PARAM_SETTINGS_1);
+		hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_2);
+		hdmi_write(hdmi, 0x00, HDMI_SLIPHDMIT_PARAM_SETTINGS_3);
+		hdmi_write(hdmi, 0x4c, HDMI_SLIPHDMIT_PARAM_SETTINGS_5);
+		hdmi_write(hdmi, 0x1e, HDMI_SLIPHDMIT_PARAM_SETTINGS_6);
+		hdmi_write(hdmi, 0x48, HDMI_SLIPHDMIT_PARAM_SETTINGS_7);
+		hdmi_write(hdmi, 0x0e, HDMI_SLIPHDMIT_PARAM_SETTINGS_8);
+		hdmi_write(hdmi, 0x25, HDMI_SLIPHDMIT_PARAM_SETTINGS_9);
+		hdmi_write(hdmi, 0x04, HDMI_SLIPHDMIT_PARAM_SETTINGS_10);
+	} else if (hdmi->var.pixclock < 30000) {
 		/* 720p, 8bit, 74.25MHz. Might need to be adjusted for other formats */
 		/*
 		 * [1:0]	Speed_A
@@ -565,13 +580,11 @@ static void sh_hdmi_avi_infoframe_setup(struct sh_hdmi *hdmi)
 	hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB3);
 
 	/*
-	 * VIC = 1280 x 720p: ignored if external config is used
-	 * Send 2 for 720 x 480p, 16 for 1080p, ignored in external mode
+	 * VIC should be ignored if external config is used, so, we could just use 0,
+	 * but play safe and use a valid value in any case just in case
 	 */
-	if (hdmi->var.yres == 1080 && hdmi->var.xres == 1920)
-		vic = 16;
-	else if (hdmi->var.yres == 480 && hdmi->var.xres == 720)
-		vic = 2;
+	if (hdmi->preprogrammed_vic)
+		vic = hdmi->preprogrammed_vic;
 	else
 		vic = 4;
 	hdmi_write(hdmi, vic, HDMI_CTRL_PKT_BUF_ACCESS_PB4);
@@ -685,11 +698,21 @@ static void sh_hdmi_configure(struct sh_hdmi *hdmi)
 }
 
 static unsigned long sh_hdmi_rate_error(struct sh_hdmi *hdmi,
-					const struct fb_videomode *mode)
+		const struct fb_videomode *mode,
+		unsigned long *hdmi_rate, unsigned long *parent_rate)
 {
-	long target = PICOS2KHZ(mode->pixclock) * 1000,
-		rate = clk_round_rate(hdmi->hdmi_clk, target);
-	unsigned long rate_error = rate > 0 ? abs(rate - target) : ULONG_MAX;
+	unsigned long target = PICOS2KHZ(mode->pixclock) * 1000, rate_error;
+	struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
+
+	*hdmi_rate = clk_round_rate(hdmi->hdmi_clk, target);
+	if ((long)*hdmi_rate < 0)
+		*hdmi_rate = clk_get_rate(hdmi->hdmi_clk);
+
+	rate_error = (long)*hdmi_rate > 0 ? abs(*hdmi_rate - target) : ULONG_MAX;
+	if (rate_error && pdata->clk_optimize_parent)
+		rate_error = pdata->clk_optimize_parent(target, hdmi_rate, parent_rate);
+	else if (clk_get_parent(hdmi->hdmi_clk))
+		*parent_rate = clk_get_rate(clk_get_parent(hdmi->hdmi_clk));
 
 	dev_dbg(hdmi->dev, "%u-%u-%u-%u x %u-%u-%u-%u\n",
 		mode->left_margin, mode->xres,
@@ -697,14 +720,15 @@ static unsigned long sh_hdmi_rate_error(struct sh_hdmi *hdmi,
 		mode->upper_margin, mode->yres,
 		mode->lower_margin, mode->vsync_len);
 
-	dev_dbg(hdmi->dev, "\t@%lu(+/-%lu)Hz, e=%lu / 1000, r=%uHz\n", target,
-		 rate_error, rate_error ? 10000 / (10 * target / rate_error) : 0,
-		 mode->refresh);
+	dev_dbg(hdmi->dev, "\t@%lu(+/-%lu)Hz, e=%lu / 1000, r=%uHz, p=%luHz\n", target,
+		rate_error, rate_error ? 10000 / (10 * target / rate_error) : 0,
+		mode->refresh, *parent_rate);
 
 	return rate_error;
 }
 
-static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
+static int sh_hdmi_read_edid(struct sh_hdmi *hdmi, unsigned long *hdmi_rate,
+			     unsigned long *parent_rate)
 {
 	struct fb_var_screeninfo tmpvar;
 	struct fb_var_screeninfo *var = &tmpvar;
@@ -735,7 +759,38 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
 	printk(KERN_CONT "\n");
 #endif
 
-	fb_edid_to_monspecs(edid, &hdmi->monspec);
+	if (!hdmi->edid_blocks) {
+		fb_edid_to_monspecs(edid, &hdmi->monspec);
+		hdmi->edid_blocks = edid[126] + 1;
+
+		dev_dbg(hdmi->dev, "%d main modes, %d extension blocks\n",
+			hdmi->monspec.modedb_len, hdmi->edid_blocks - 1);
+	} else {
+		dev_dbg(hdmi->dev, "Extension %u detected, DTD start %u\n",
+			edid[0], edid[2]);
+		fb_edid_add_monspecs(edid, &hdmi->monspec);
+	}
+
+	if (hdmi->edid_blocks > hdmi->edid_segment_nr * 2 +
+	    (hdmi->edid_block_addr >> 7) + 1) {
+		/* More blocks to read */
+		if (hdmi->edid_block_addr) {
+			hdmi->edid_block_addr = 0;
+			hdmi->edid_segment_nr++;
+		} else {
+			hdmi->edid_block_addr = 0x80;
+		}
+		/* Set EDID word address  */
+		hdmi_write(hdmi, hdmi->edid_block_addr, HDMI_EDID_WORD_ADDRESS);
+		/* Enable EDID interrupt */
+		hdmi_write(hdmi, 0xC6, HDMI_INTERRUPT_MASK_1);
+		/* Set EDID segment pointer - starts reading EDID */
+		hdmi_write(hdmi, hdmi->edid_segment_nr, HDMI_EDID_SEGMENT_POINTER);
+		return -EAGAIN;
+	}
+
+	/* All E-EDID blocks ready */
+	dev_dbg(hdmi->dev, "%d main and extended modes\n", hdmi->monspec.modedb_len);
 
 	fb_get_options("sh_mobile_lcdc", &forced);
 	if (forced && *forced) {
@@ -754,11 +809,14 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
 	for (i = 0, mode = hdmi->monspec.modedb;
 	     f_width && f_height && i < hdmi->monspec.modedb_len && !exact_match;
 	     i++, mode++) {
-		unsigned long rate_error = sh_hdmi_rate_error(hdmi, mode);
+		unsigned long rate_error;
 
 		/* No interest in unmatching modes */
 		if (f_width != mode->xres || f_height != mode->yres)
 			continue;
+
+		rate_error = sh_hdmi_rate_error(hdmi, mode, hdmi_rate, parent_rate);
+
 		if (f_refresh == mode->refresh || (!f_refresh && !rate_error))
 			/*
 			 * Exact match if either the refresh rate matches or it
@@ -787,6 +845,9 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
 		found_rate_error = rate_error;
 	}
 
+	hdmi->var.width = hdmi->monspec.max_x * 10;
+	hdmi->var.height = hdmi->monspec.max_y * 10;
+
 	/*
 	 * TODO 1: if no ->info is present, postpone running the config until
 	 * after ->info first gets registered.
@@ -802,7 +863,7 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
 
 		if (modelist) {
 			found = &modelist->mode;
-			found_rate_error = sh_hdmi_rate_error(hdmi, found);
+			found_rate_error = sh_hdmi_rate_error(hdmi, found, hdmi_rate, parent_rate);
 		}
 	}
 
@@ -810,16 +871,27 @@ static int sh_hdmi_read_edid(struct sh_hdmi *hdmi)
 	if (!found)
 		return -ENXIO;
 
-	dev_info(hdmi->dev, "Using %s mode %ux%u@%uHz (%luHz), clock error %luHz\n",
-		 modelist ? "default" : "EDID", found->xres, found->yres,
-		 found->refresh, PICOS2KHZ(found->pixclock) * 1000, found_rate_error);
-
-	if ((found->xres == 720 && found->yres == 480) ||
-	    (found->xres == 1280 && found->yres == 720) ||
-	    (found->xres == 1920 && found->yres == 1080))
-		hdmi->preprogrammed_mode = true;
+	if (found->xres == 640 && found->yres == 480 && found->refresh == 60)
+		hdmi->preprogrammed_vic = 1;
+	else if (found->xres == 720 && found->yres == 480 && found->refresh == 60)
+		hdmi->preprogrammed_vic = 2;
+	else if (found->xres == 720 && found->yres == 576 && found->refresh == 50)
+		hdmi->preprogrammed_vic = 17;
+	else if (found->xres == 1280 && found->yres == 720 && found->refresh == 60)
+		hdmi->preprogrammed_vic = 4;
+	else if (found->xres == 1920 && found->yres == 1080 && found->refresh == 24)
+		hdmi->preprogrammed_vic = 32;
+	else if (found->xres == 1920 && found->yres == 1080 && found->refresh == 50)
+		hdmi->preprogrammed_vic = 31;
+	else if (found->xres == 1920 && found->yres == 1080 && found->refresh == 60)
+		hdmi->preprogrammed_vic = 16;
 	else
-		hdmi->preprogrammed_mode = false;
+		hdmi->preprogrammed_vic = 0;
+
+	dev_dbg(hdmi->dev, "Using %s %s mode %ux%u@%uHz (%luHz), clock error %luHz\n",
+		modelist ? "default" : "EDID", hdmi->preprogrammed_vic ? "VIC" : "external",
+		found->xres, found->yres, found->refresh,
+		PICOS2KHZ(found->pixclock) * 1000, found_rate_error);
 
 	fb_videomode_to_var(&hdmi->var, found);
 	sh_hdmi_external_video_param(hdmi);
@@ -868,32 +940,34 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
 		/* Check, if hot plug & MSENS pin status are both high */
 		if ((msens & 0xC0) == 0xC0) {
 			/* Display plug in */
+			hdmi->edid_segment_nr = 0;
+			hdmi->edid_block_addr = 0;
+			hdmi->edid_blocks = 0;
 			hdmi->hp_state = HDMI_HOTPLUG_CONNECTED;
 
 			/* Set EDID word address  */
 			hdmi_write(hdmi, 0x00, HDMI_EDID_WORD_ADDRESS);
-			/* Set EDID segment pointer */
-			hdmi_write(hdmi, 0x00, HDMI_EDID_SEGMENT_POINTER);
 			/* Enable EDID interrupt */
 			hdmi_write(hdmi, 0xC6, HDMI_INTERRUPT_MASK_1);
+			/* Set EDID segment pointer - starts reading EDID */
+			hdmi_write(hdmi, 0x00, HDMI_EDID_SEGMENT_POINTER);
 		} else if (!(status1 & 0x80)) {
 			/* Display unplug, beware multiple interrupts */
-			if (hdmi->hp_state != HDMI_HOTPLUG_DISCONNECTED)
+			if (hdmi->hp_state != HDMI_HOTPLUG_DISCONNECTED) {
+				hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED;
 				schedule_delayed_work(&hdmi->edid_work, 0);
-
-			hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED;
+			}
 			/* display_off will switch back to mode_a */
 		}
 	} else if (status1 & 2) {
 		/* EDID error interrupt: retry */
 		/* Set EDID word address  */
-		hdmi_write(hdmi, 0x00, HDMI_EDID_WORD_ADDRESS);
+		hdmi_write(hdmi, hdmi->edid_block_addr, HDMI_EDID_WORD_ADDRESS);
 		/* Set EDID segment pointer */
-		hdmi_write(hdmi, 0x00, HDMI_EDID_SEGMENT_POINTER);
+		hdmi_write(hdmi, hdmi->edid_segment_nr, HDMI_EDID_SEGMENT_POINTER);
 	} else if (status1 & 4) {
 		/* Disable EDID interrupt */
 		hdmi_write(hdmi, 0xC0, HDMI_INTERRUPT_MASK_1);
-		hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE;
 		schedule_delayed_work(&hdmi->edid_work, msecs_to_jiffies(10));
 	}
 
@@ -960,8 +1034,12 @@ static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi)
 	dev_dbg(info->dev, "Old %ux%u, new %ux%u\n",
 		mode1.xres, mode1.yres, mode2.xres, mode2.yres);
 
-	if (fb_mode_is_equal(&mode1, &mode2))
+	if (fb_mode_is_equal(&mode1, &mode2)) {
+		/* It can be a different monitor with an equal video-mode */
+		old_var->width = new_var->width;
+		old_var->height = new_var->height;
 		return false;
+	}
 
 	dev_dbg(info->dev, "Switching %u -> %u lines\n",
 		mode1.yres, mode2.yres);
@@ -972,39 +1050,37 @@ static bool sh_hdmi_must_reconfigure(struct sh_hdmi *hdmi)
 
 /**
  * sh_hdmi_clk_configure() - set HDMI clock frequency and enable the clock
- * @hdmi:	driver context
- * @pixclock:	pixel clock period in picoseconds
- * return:	configured positive rate if successful
- *		0 if couldn't set the rate, but managed to enable the clock
- *		negative error, if couldn't enable the clock
+ * @hdmi:		driver context
+ * @hdmi_rate:		HDMI clock frequency in Hz
+ * @parent_rate:	if != 0 - set parent clock rate for optimal precision
+ * return:		configured positive rate if successful
+ *			0 if couldn't set the rate, but managed to enable the
+ *			clock, negative error, if couldn't enable the clock
  */
-static long sh_hdmi_clk_configure(struct sh_hdmi *hdmi, unsigned long pixclock)
+static long sh_hdmi_clk_configure(struct sh_hdmi *hdmi, unsigned long hdmi_rate,
+				  unsigned long parent_rate)
 {
-	long rate;
 	int ret;
 
-	rate = PICOS2KHZ(pixclock) * 1000;
-	rate = clk_round_rate(hdmi->hdmi_clk, rate);
-	if (rate > 0) {
-		ret = clk_set_rate(hdmi->hdmi_clk, rate);
+	if (parent_rate && clk_get_parent(hdmi->hdmi_clk)) {
+		ret = clk_set_rate(clk_get_parent(hdmi->hdmi_clk), parent_rate);
 		if (ret < 0) {
-			dev_warn(hdmi->dev, "Cannot set rate %ld: %d\n", rate, ret);
-			rate = 0;
+			dev_warn(hdmi->dev, "Cannot set parent rate %ld: %d\n", parent_rate, ret);
+			hdmi_rate = clk_round_rate(hdmi->hdmi_clk, hdmi_rate);
 		} else {
-			dev_dbg(hdmi->dev, "HDMI set frequency %lu\n", rate);
+			dev_dbg(hdmi->dev, "HDMI set parent frequency %lu\n", parent_rate);
 		}
-	} else {
-		rate = 0;
-		dev_warn(hdmi->dev, "Cannot get suitable rate: %ld\n", rate);
 	}
 
-	ret = clk_enable(hdmi->hdmi_clk);
+	ret = clk_set_rate(hdmi->hdmi_clk, hdmi_rate);
 	if (ret < 0) {
-		dev_err(hdmi->dev, "Cannot enable clock: %d\n", ret);
-		return ret;
+		dev_warn(hdmi->dev, "Cannot set rate %ld: %d\n", hdmi_rate, ret);
+		hdmi_rate = 0;
+	} else {
+		dev_dbg(hdmi->dev, "HDMI set frequency %lu\n", hdmi_rate);
 	}
 
-	return rate;
+	return hdmi_rate;
 }
 
 /* Hotplug interrupt occurred, read EDID */
@@ -1023,17 +1099,20 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 
 	mutex_lock(&hdmi->mutex);
 
-	if (hdmi->hp_state == HDMI_HOTPLUG_EDID_DONE) {
+	if (hdmi->hp_state == HDMI_HOTPLUG_CONNECTED) {
+		unsigned long parent_rate = 0, hdmi_rate;
+
 		/* A device has been plugged in */
 		pm_runtime_get_sync(hdmi->dev);
 
-		ret = sh_hdmi_read_edid(hdmi);
+		ret = sh_hdmi_read_edid(hdmi, &hdmi_rate, &parent_rate);
 		if (ret < 0)
 			goto out;
 
+		hdmi->hp_state = HDMI_HOTPLUG_EDID_DONE;
+
 		/* Reconfigure the clock */
-		clk_disable(hdmi->hdmi_clk);
-		ret = sh_hdmi_clk_configure(hdmi, hdmi->var.pixclock);
+		ret = sh_hdmi_clk_configure(hdmi, hdmi_rate, parent_rate);
 		if (ret < 0)
 			goto out;
 
@@ -1057,8 +1136,11 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 			 * on, if we run a resume here, the logo disappears
 			 */
 			if (lock_fb_info(hdmi->info)) {
-				sh_hdmi_display_on(hdmi, hdmi->info);
-				unlock_fb_info(hdmi->info);
+				struct fb_info *info = hdmi->info;
+				info->var.width = hdmi->var.width;
+				info->var.height = hdmi->var.height;
+				sh_hdmi_display_on(hdmi, info);
+				unlock_fb_info(info);
 			}
 		} else {
 			/* New monitor or have to wake up */
@@ -1071,6 +1153,10 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 		if (!hdmi->info)
 			goto out;
 
+		hdmi->monspec.modedb_len = 0;
+		fb_destroy_modedb(hdmi->monspec.modedb);
+		hdmi->monspec.modedb = NULL;
+
 		acquire_console_sem();
 
 		/* HDMI disconnect */
@@ -1078,11 +1164,10 @@ static void sh_hdmi_edid_work_fn(struct work_struct *work)
 
 		release_console_sem();
 		pm_runtime_put(hdmi->dev);
-		fb_destroy_modedb(hdmi->monspec.modedb);
 	}
 
 out:
-	if (ret < 0)
+	if (ret < 0 && ret != -EAGAIN)
 		hdmi->hp_state = HDMI_HOTPLUG_DISCONNECTED;
 	mutex_unlock(&hdmi->mutex);
 
@@ -1163,13 +1248,22 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
 		goto egetclk;
 	}
 
-	/* Some arbitrary relaxed pixclock just to get things started */
-	rate = sh_hdmi_clk_configure(hdmi, 37037);
+	/* An arbitrary relaxed pixclock just to get things started: from standard 480p */
+	rate = clk_round_rate(hdmi->hdmi_clk, PICOS2KHZ(37037));
+	if (rate > 0)
+		rate = sh_hdmi_clk_configure(hdmi, rate, 0);
+
 	if (rate < 0) {
 		ret = rate;
 		goto erate;
 	}
 
+	ret = clk_enable(hdmi->hdmi_clk);
+	if (ret < 0) {
+		dev_err(hdmi->dev, "Cannot enable clock: %d\n", ret);
+		goto erate;
+	}
+
 	dev_dbg(&pdev->dev, "Enabled HDMI clock at %luHz\n", rate);
 
 	if (!request_mem_region(res->start, resource_size(res), dev_name(&pdev->dev))) {
@@ -1187,10 +1281,6 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, hdmi);
 
-	/* Product and revision IDs are 0 in sh-mobile version */
-	dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
-		 hdmi_read(hdmi, HDMI_PRODUCT_ID), hdmi_read(hdmi, HDMI_REVISION_ID));
-
 	/* Set up LCDC callbacks */
 	board_cfg = &pdata->lcd_chan->board_cfg;
 	board_cfg->owner = THIS_MODULE;
@@ -1203,6 +1293,10 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_resume(&pdev->dev);
 
+	/* Product and revision IDs are 0 in sh-mobile version */
+	dev_info(&pdev->dev, "Detected HDMI controller 0x%x:0x%x\n",
+		 hdmi_read(hdmi, HDMI_PRODUCT_ID), hdmi_read(hdmi, HDMI_REVISION_ID));
+
 	ret = request_irq(irq, sh_hdmi_hotplug, 0,
 			  dev_name(&pdev->dev), hdmi);
 	if (ret < 0) {
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 50963739a40..bd4840a8a6b 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -54,8 +54,8 @@ static int lcdc_shared_regs[] = {
 };
 #define NR_SHARED_REGS ARRAY_SIZE(lcdc_shared_regs)
 
-#define DEFAULT_XRES 1280
-#define DEFAULT_YRES 1024
+#define MAX_XRES 1920
+#define MAX_YRES 1080
 
 static unsigned long lcdc_offs_mainlcd[NR_CH_REGS] = {
 	[LDDCKPAT1R] = 0x400,
@@ -115,15 +115,16 @@ static const struct fb_videomode default_720p = {
 	.xres = 1280,
 	.yres = 720,
 
-	.left_margin = 200,
-	.right_margin = 88,
-	.hsync_len = 48,
+	.left_margin = 220,
+	.right_margin = 110,
+	.hsync_len = 40,
 
 	.upper_margin = 20,
 	.lower_margin = 5,
 	.vsync_len = 5,
 
 	.pixclock = 13468,
+	.refresh = 60,
 	.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
 };
 
@@ -138,6 +139,7 @@ struct sh_mobile_lcdc_priv {
 	struct notifier_block notifier;
 	unsigned long saved_shared_regs[NR_SHARED_REGS];
 	int started;
+	int forced_bpp; /* 2 channel LCDC must share bpp setting */
 };
 
 static bool banked(int reg_nr)
@@ -460,13 +462,18 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 	struct sh_mobile_lcdc_chan *ch;
 	struct sh_mobile_lcdc_board_cfg	*board_cfg;
 	unsigned long tmp;
+	int bpp = 0;
 	int k, m;
 	int ret = 0;
 
 	/* enable clocks before accessing the hardware */
-	for (k = 0; k < ARRAY_SIZE(priv->ch); k++)
-		if (priv->ch[k].enabled)
+	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
+		if (priv->ch[k].enabled) {
 			sh_mobile_lcdc_clk_on(priv);
+			if (!bpp)
+				bpp = priv->ch[k].info->var.bits_per_pixel;
+		}
+	}
 
 	/* reset */
 	lcdc_write(priv, _LDCNT2R, lcdc_read(priv, _LDCNT2R) | LCDC_RESET);
@@ -534,7 +541,17 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 	}
 
 	/* word and long word swap */
-	lcdc_write(priv, _LDDDSR, lcdc_read(priv, _LDDDSR) | 6);
+	switch (bpp) {
+	case 16:
+		lcdc_write(priv, _LDDDSR, lcdc_read(priv, _LDDDSR) | 6);
+		break;
+	case 24:
+		lcdc_write(priv, _LDDDSR, lcdc_read(priv, _LDDDSR) | 7);
+		break;
+	case 32:
+		lcdc_write(priv, _LDDDSR, lcdc_read(priv, _LDDDSR) | 4);
+		break;
+	}
 
 	for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
 		ch = &priv->ch[k];
@@ -545,7 +562,16 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
 		/* set bpp format in PKF[4:0] */
 		tmp = lcdc_read_chan(ch, LDDFR);
 		tmp &= ~0x0001001f;
-		tmp |= (ch->info->var.bits_per_pixel == 16) ? 3 : 0;
+		switch (ch->info->var.bits_per_pixel) {
+		case 16:
+			tmp |= 0x03;
+			break;
+		case 24:
+			tmp |= 0x0b;
+			break;
+		case 32:
+			break;
+		}
 		lcdc_write_chan(ch, LDDFR, tmp);
 
 		/* point out our frame buffer */
@@ -859,7 +885,7 @@ static void sh_mobile_fb_reconfig(struct fb_info *info)
 		/* Couldn't reconfigure, hopefully, can continue as before */
 		return;
 
-	info->fix.line_length = mode2.xres * (ch->cfg.bpp / 8);
+	info->fix.line_length = mode1.xres * (ch->cfg.bpp / 8);
 
 	/*
 	 * fb_set_var() calls the notifier change internally, only if
@@ -867,7 +893,7 @@ static void sh_mobile_fb_reconfig(struct fb_info *info)
 	 * user event, we have to call the chain ourselves.
 	 */
 	event.info = info;
-	event.data = &mode2;
+	event.data = &mode1;
 	fb_notifier_call_chain(evnt, &event);
 }
 
@@ -912,25 +938,30 @@ static int sh_mobile_open(struct fb_info *info, int user)
 static int sh_mobile_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 {
 	struct sh_mobile_lcdc_chan *ch = info->par;
+	struct sh_mobile_lcdc_priv *p = ch->lcdc;
 
-	if (var->xres < 160 || var->xres > 1920 ||
-	    var->yres < 120 || var->yres > 1080 ||
-	    var->left_margin < 32 || var->left_margin > 320 ||
-	    var->right_margin < 12 || var->right_margin > 240 ||
-	    var->upper_margin < 12 || var->upper_margin > 120 ||
-	    var->lower_margin < 1 || var->lower_margin > 64 ||
-	    var->hsync_len < 32 || var->hsync_len > 240 ||
-	    var->vsync_len < 2 || var->vsync_len > 64 ||
-	    var->pixclock < 6000 || var->pixclock > 40000 ||
+	if (var->xres > MAX_XRES || var->yres > MAX_YRES ||
 	    var->xres * var->yres * (ch->cfg.bpp / 8) * 2 > info->fix.smem_len) {
-		dev_warn(info->dev, "Invalid info: %u %u %u %u %u %u %u %u %u!\n",
-			 var->xres, var->yres,
-			 var->left_margin, var->right_margin,
-			 var->upper_margin, var->lower_margin,
-			 var->hsync_len, var->vsync_len,
-			 var->pixclock);
+		dev_warn(info->dev, "Invalid info: %u-%u-%u-%u x %u-%u-%u-%u @ %lukHz!\n",
+			 var->left_margin, var->xres, var->right_margin, var->hsync_len,
+			 var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
+			 PICOS2KHZ(var->pixclock));
+		return -EINVAL;
+	}
+
+	/* only accept the forced_bpp for dual channel configurations */
+	if (p->forced_bpp && p->forced_bpp != var->bits_per_pixel)
+		return -EINVAL;
+
+	switch (var->bits_per_pixel) {
+	case 16: /* PKF[4:0] = 00011 - RGB 565 */
+	case 24: /* PKF[4:0] = 01011 - RGB 888 */
+	case 32: /* PKF[4:0] = 00000 - RGBA 888 */
+		break;
+	default:
 		return -EINVAL;
 	}
+
 	return 0;
 }
 
@@ -963,19 +994,27 @@ static int sh_mobile_lcdc_set_bpp(struct fb_var_screeninfo *var, int bpp)
 		var->transp.length = 0;
 		break;
 
-	case 32: /* PKF[4:0] = 00000 - RGB 888
-		  * sh7722 pdf says 00RRGGBB but reality is GGBB00RR
-		  * this may be because LDDDSR has word swap enabled..
-		  */
-		var->red.offset = 0;
+	case 24: /* PKF[4:0] = 01011 - RGB 888 */
+		var->red.offset = 16;
 		var->red.length = 8;
-		var->green.offset = 24;
+		var->green.offset = 8;
 		var->green.length = 8;
-		var->blue.offset = 16;
+		var->blue.offset = 0;
 		var->blue.length = 8;
 		var->transp.offset = 0;
 		var->transp.length = 0;
 		break;
+
+	case 32: /* PKF[4:0] = 00000 - RGBA 888 */
+		var->red.offset = 16;
+		var->red.length = 8;
+		var->green.offset = 8;
+		var->green.length = 8;
+		var->blue.offset = 0;
+		var->blue.length = 8;
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -1179,6 +1218,10 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
+	/* for dual channel LCDC (MAIN + SUB) force shared bpp setting */
+	if (j == 2)
+		priv->forced_bpp = pdata->ch[0].bpp;
+
 	priv->base = ioremap_nocache(res->start, resource_size(res));
 	if (!priv->base)
 		goto err1;
@@ -1197,6 +1240,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		const struct fb_videomode *mode = cfg->lcd_cfg;
 		unsigned long max_size = 0;
 		int k;
+		int num_cfg;
 
 		ch->info = framebuffer_alloc(0, &pdev->dev);
 		if (!ch->info) {
@@ -1224,7 +1268,7 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		}
 
 		if (!mode)
-			max_size = DEFAULT_XRES * DEFAULT_YRES;
+			max_size = MAX_XRES * MAX_YRES;
 		else if (max_cfg)
 			dev_dbg(&pdev->dev, "Found largest videomode %ux%u\n",
 				max_cfg->xres, max_cfg->yres);
@@ -1232,10 +1276,18 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 		info->fix = sh_mobile_lcdc_fix;
 		info->fix.smem_len = max_size * (cfg->bpp / 8) * 2;
 
-		if (!mode)
+		if (!mode) {
 			mode = &default_720p;
+			num_cfg = 1;
+		} else {
+			num_cfg = cfg->num_cfg;
+		}
+
+		fb_videomode_to_modelist(mode, num_cfg, &info->modelist);
 
 		fb_videomode_to_var(var, mode);
+		var->width = cfg->lcd_size_cfg.width;
+		var->height = cfg->lcd_size_cfg.height;
 		/* Default Y virtual resolution is 2x panel size */
 		var->yres_virtual = var->yres * 2;
 		var->activate = FB_ACTIVATE_NOW;
@@ -1281,10 +1333,6 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 
 	for (i = 0; i < j; i++) {
 		struct sh_mobile_lcdc_chan *ch = priv->ch + i;
-		const struct fb_videomode *mode = ch->cfg.lcd_cfg;
-
-		if (!mode)
-			mode = &default_720p;
 
 		info = ch->info;
 
@@ -1297,7 +1345,6 @@ static int __devinit sh_mobile_lcdc_probe(struct platform_device *pdev)
 			}
 		}
 
-		fb_videomode_to_modelist(mode, ch->cfg.num_cfg, &info->modelist);
 		error = register_framebuffer(info);
 		if (error < 0)
 			goto err1;
diff --git a/drivers/video/sis/init.c b/drivers/video/sis/init.c
index c311ad3c368..66de832361c 100644
--- a/drivers/video/sis/init.c
+++ b/drivers/video/sis/init.c
@@ -56,17 +56,13 @@
  * Used by permission.
  */
 
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
 #include "init.h"
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 #include "300vtbl.h"
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 #include "310vtbl.h"
 #endif
 
@@ -78,7 +74,7 @@
 /*         POINTER INITIALIZATION            */
 /*********************************************/
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 InitCommonPointer(struct SiS_Private *SiS_Pr)
 {
@@ -160,7 +156,7 @@ InitCommonPointer(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void
 InitTo300Pointer(struct SiS_Private *SiS_Pr)
 {
@@ -237,7 +233,7 @@ InitTo300Pointer(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 InitTo310Pointer(struct SiS_Private *SiS_Pr)
 {
@@ -321,13 +317,13 @@ bool
 SiSInitPtr(struct SiS_Private *SiS_Pr)
 {
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       InitTo300Pointer(SiS_Pr);
 #else
       return false;
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       InitTo310Pointer(SiS_Pr);
 #else
       return false;
@@ -340,9 +336,7 @@ SiSInitPtr(struct SiS_Private *SiS_Pr)
 /*            HELPER: Get ModeID             */
 /*********************************************/
 
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay,
 		int Depth, bool FSTN, int LCDwidth, int LCDheight)
@@ -882,59 +876,59 @@ SiS_GetModeID_VGA2(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDispl
 /*********************************************/
 
 void
-SiS_SetReg(SISIOADDRESS port, unsigned short index, unsigned short data)
+SiS_SetReg(SISIOADDRESS port, u8 index, u8 data)
 {
-   OutPortByte(port, index);
-   OutPortByte(port + 1, data);
+	outb(index, port);
+	outb(data, port + 1);
 }
 
 void
-SiS_SetRegByte(SISIOADDRESS port, unsigned short data)
+SiS_SetRegByte(SISIOADDRESS port, u8 data)
 {
-   OutPortByte(port, data);
+	outb(data, port);
 }
 
 void
-SiS_SetRegShort(SISIOADDRESS port, unsigned short data)
+SiS_SetRegShort(SISIOADDRESS port, u16 data)
 {
-   OutPortWord(port, data);
+	outw(data, port);
 }
 
 void
-SiS_SetRegLong(SISIOADDRESS port, unsigned int data)
+SiS_SetRegLong(SISIOADDRESS port, u32 data)
 {
-   OutPortLong(port, data);
+	outl(data, port);
 }
 
-unsigned char
-SiS_GetReg(SISIOADDRESS port, unsigned short index)
+u8
+SiS_GetReg(SISIOADDRESS port, u8 index)
 {
-   OutPortByte(port, index);
-   return(InPortByte(port + 1));
+	outb(index, port);
+	return inb(port + 1);
 }
 
-unsigned char
+u8
 SiS_GetRegByte(SISIOADDRESS port)
 {
-   return(InPortByte(port));
+	return inb(port);
 }
 
-unsigned short
+u16
 SiS_GetRegShort(SISIOADDRESS port)
 {
-   return(InPortWord(port));
+	return inw(port);
 }
 
-unsigned int
+u32
 SiS_GetRegLong(SISIOADDRESS port)
 {
-   return(InPortLong(port));
+	return inl(port);
 }
 
 void
-SiS_SetRegANDOR(SISIOADDRESS Port, unsigned short Index, unsigned short DataAND, unsigned short DataOR)
+SiS_SetRegANDOR(SISIOADDRESS Port, u8 Index, u8 DataAND, u8 DataOR)
 {
-   unsigned short temp;
+   u8 temp;
 
    temp = SiS_GetReg(Port, Index);
    temp = (temp & (DataAND)) | DataOR;
@@ -942,9 +936,9 @@ SiS_SetRegANDOR(SISIOADDRESS Port, unsigned short Index, unsigned short DataAND,
 }
 
 void
-SiS_SetRegAND(SISIOADDRESS Port, unsigned short Index, unsigned short DataAND)
+SiS_SetRegAND(SISIOADDRESS Port, u8 Index, u8 DataAND)
 {
-   unsigned short temp;
+   u8 temp;
 
    temp = SiS_GetReg(Port, Index);
    temp &= DataAND;
@@ -952,9 +946,9 @@ SiS_SetRegAND(SISIOADDRESS Port, unsigned short Index, unsigned short DataAND)
 }
 
 void
-SiS_SetRegOR(SISIOADDRESS Port, unsigned short Index, unsigned short DataOR)
+SiS_SetRegOR(SISIOADDRESS Port, u8 Index, u8 DataOR)
 {
-   unsigned short temp;
+   u8 temp;
 
    temp = SiS_GetReg(Port, Index);
    temp |= DataOR;
@@ -1089,7 +1083,7 @@ static void
 SiSInitPCIetc(struct SiS_Private *SiS_Pr)
 {
    switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    case SIS_300:
    case SIS_540:
    case SIS_630:
@@ -1108,7 +1102,7 @@ SiSInitPCIetc(struct SiS_Private *SiS_Pr)
       SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x5A);
       break;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    case SIS_315H:
    case SIS_315:
    case SIS_315PRO:
@@ -1152,9 +1146,7 @@ SiSInitPCIetc(struct SiS_Private *SiS_Pr)
 /*             HELPER: SetLVDSetc            */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiSSetLVDSetc(struct SiS_Private *SiS_Pr)
 {
@@ -1174,7 +1166,7 @@ SiSSetLVDSetc(struct SiS_Private *SiS_Pr)
    if((temp == 1) || (temp == 2)) return;
 
    switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    case SIS_540:
    case SIS_630:
    case SIS_730:
@@ -1188,7 +1180,7 @@ SiSSetLVDSetc(struct SiS_Private *SiS_Pr)
 	}
 	break;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    case SIS_550:
    case SIS_650:
    case SIS_740:
@@ -1420,9 +1412,7 @@ SiS_ResetSegmentRegisters(struct SiS_Private *SiS_Pr)
 /*             HELPER: GetVBType             */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_GetVBType(struct SiS_Private *SiS_Pr)
 {
@@ -1487,7 +1477,6 @@ SiS_GetVBType(struct SiS_Private *SiS_Pr)
 /*           HELPER: Check RAM size          */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static bool
 SiS_CheckMemorySize(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 		unsigned short ModeIdIndex)
@@ -1501,13 +1490,12 @@ SiS_CheckMemorySize(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    if(AdapterMemSize < memorysize) return false;
    return true;
 }
-#endif
 
 /*********************************************/
 /*           HELPER: Get DRAM type           */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static unsigned char
 SiS_Get310DRAMType(struct SiS_Private *SiS_Pr)
 {
@@ -1574,7 +1562,6 @@ SiS_GetMCLK(struct SiS_Private *SiS_Pr)
 /*           HELPER: ClearBuffer             */
 /*********************************************/
 
-#ifdef SIS_LINUX_KERNEL
 static void
 SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 {
@@ -1587,7 +1574,7 @@ SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 
    if(SiS_Pr->SiS_ModeType >= ModeEGA) {
       if(ModeNo > 0x13) {
-	 SiS_SetMemory(memaddr, memsize, 0);
+	 memset_io(memaddr, 0, memsize);
       } else {
 	 pBuffer = (unsigned short SISIOMEMTYPE *)memaddr;
 	 for(i = 0; i < 0x4000; i++) writew(0x0000, &pBuffer[i]);
@@ -1596,10 +1583,9 @@ SiS_ClearBuffer(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
       pBuffer = (unsigned short SISIOMEMTYPE *)memaddr;
       for(i = 0; i < 0x4000; i++) writew(0x0720, &pBuffer[i]);
    } else {
-      SiS_SetMemory(memaddr, 0x8000, 0);
+      memset_io(memaddr, 0, 0x8000);
    }
 }
-#endif
 
 /*********************************************/
 /*           HELPER: SearchModeID            */
@@ -2132,7 +2118,7 @@ SiS_SetCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       SiS_SetReg(SiS_Pr->SiS_P3d4,0x14,0x4F);
    }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType == XGI_20) {
       SiS_SetReg(SiS_Pr->SiS_P3d4,0x04,crt1data[4] - 1);
       if(!(temp = crt1data[5] & 0x1f)) {
@@ -2215,7 +2201,7 @@ SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    SiS_SetReg(SiS_Pr->SiS_P3c4,0x2c,clkb);
 
    if(SiS_Pr->ChipType >= SIS_315H) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       SiS_SetReg(SiS_Pr->SiS_P3c4,0x2D,0x01);
       if(SiS_Pr->ChipType == XGI_20) {
          unsigned short mf = SiS_GetModeFlag(SiS_Pr, ModeNo, ModeIdIndex);
@@ -2236,7 +2222,7 @@ SiS_SetCRT1VCLK(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 /*                  FIFO                     */
 /*********************************************/
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 void
 SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *idx1,
 		unsigned short *idx2)
@@ -2506,11 +2492,7 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x09,0x80,data);
 
   /* Write foreground and background queue */
-#ifdef SIS_LINUX_KERNEL
    templ = sisfb_read_nbridge_pci_dword(SiS_Pr, 0x50);
-#else
-   templ = pciReadLong(0x00000000, 0x50);
-#endif
 
    if(SiS_Pr->ChipType == SIS_730) {
 
@@ -2530,13 +2512,8 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    }
 
-#ifdef SIS_LINUX_KERNEL
    sisfb_write_nbridge_pci_dword(SiS_Pr, 0x50, templ);
    templ = sisfb_read_nbridge_pci_dword(SiS_Pr, 0xA0);
-#else
-   pciWriteLong(0x00000000, 0x50, templ);
-   templ = pciReadLong(0x00000000, 0xA0);
-#endif
 
    /* GUI grant timer (PCI config 0xA3) */
    if(SiS_Pr->ChipType == SIS_730) {
@@ -2552,15 +2529,11 @@ SiS_SetCRT1FIFO_630(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    }
 
-#ifdef SIS_LINUX_KERNEL
    sisfb_write_nbridge_pci_dword(SiS_Pr, 0xA0, templ);
-#else
-   pciWriteLong(0x00000000, 0xA0, templ);
-#endif
 }
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_SetCRT1FIFO_310(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex)
 {
@@ -2612,7 +2585,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    }
 
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       if(VCLK > 150) data |= 0x80;
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x07,0x7B,data);
 
@@ -2621,7 +2594,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xF7,data);
 #endif
    } else if(SiS_Pr->ChipType < XGI_20) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(VCLK >= 166) data |= 0x0c;
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xf3,data);
 
@@ -2630,7 +2603,7 @@ SiS_SetVCLKState(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       }
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(VCLK >= 200) data |= 0x0c;
       if(SiS_Pr->ChipType == XGI_20) data &= ~0x04;
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x32,0xf3,data);
@@ -2675,7 +2648,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 		unsigned short ModeIdIndex, unsigned short RRTI)
 {
    unsigned short data, infoflag = 0, modeflag, resindex;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned char  *ROMAddr  = SiS_Pr->VirtualRomBase;
    unsigned short data2, data3;
 #endif
@@ -2736,7 +2709,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0F,0xB7,data);
    }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x31,0xfb);
    }
@@ -2826,7 +2799,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    SiS_SetVCLKState(SiS_Pr, ModeNo, RRTI, ModeIdIndex);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(((SiS_Pr->ChipType >= SIS_315H) && (SiS_Pr->ChipType < SIS_661)) ||
        (SiS_Pr->ChipType == XGI_40)) {
       if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x31) & 0x40) {
@@ -2845,7 +2818,7 @@ SiS_SetCRT1ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 #endif
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_SetupDualChip(struct SiS_Private *SiS_Pr)
 {
@@ -2999,11 +2972,6 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho
    SiS_Pr->SiS_SelectCRT2Rate = 0;
    SiS_Pr->SiS_SetFlag &= (~ProgrammingCRT2);
 
-#ifdef SIS_XORG_XF86
-   xf86DrvMsgVerb(0, X_PROBED, 4, "(init: VBType=0x%04x, VBInfo=0x%04x)\n",
-                    SiS_Pr->SiS_VBType, SiS_Pr->SiS_VBInfo);
-#endif
-
    if(SiS_Pr->SiS_VBInfo & SetSimuScanMode) {
       if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) {
          SiS_Pr->SiS_SetFlag |= ProgrammingCRT2;
@@ -3028,7 +2996,7 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho
    }
 
    switch(SiS_Pr->ChipType) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    case SIS_300:
       SiS_SetCRT1FIFO_300(SiS_Pr, ModeNo, RefreshRateTableIndex);
       break;
@@ -3039,7 +3007,7 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho
       break;
 #endif
    default:
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(SiS_Pr->ChipType == XGI_20) {
          unsigned char sr2b = 0, sr2c = 0;
          switch(ModeNo) {
@@ -3062,7 +3030,7 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho
 
    SiS_SetCRT1ModeRegs(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType == XGI_40) {
       SiS_SetupDualChip(SiS_Pr);
    }
@@ -3070,11 +3038,9 @@ SiS_SetCRT1Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sho
 
    SiS_LoadDAC(SiS_Pr, ModeNo, ModeIdIndex);
 
-#ifdef SIS_LINUX_KERNEL
    if(SiS_Pr->SiS_flag_clearbuffer) {
       SiS_ClearBuffer(SiS_Pr, ModeNo);
    }
-#endif
 
    if(!(SiS_Pr->SiS_VBInfo & (SetSimuScanMode | SwitchCRT2 | SetCRT2ToLCDA))) {
       SiS_WaitRetrace1(SiS_Pr);
@@ -3104,7 +3070,7 @@ SiS_InitVB(struct SiS_Private *SiS_Pr)
 static void
 SiS_ResetVB(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned char  *ROMAddr = SiS_Pr->VirtualRomBase;
    unsigned short temp;
 
@@ -3139,7 +3105,7 @@ SiS_StrangeStuff(struct SiS_Private *SiS_Pr)
     * which locks CRT2 in some way to CRT1 timing. Disable
     * this here.
     */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if((IS_SIS651) || (IS_SISM650) ||
       SiS_Pr->ChipType == SIS_340 ||
       SiS_Pr->ChipType == XGI_40) {
@@ -3160,7 +3126,7 @@ SiS_StrangeStuff(struct SiS_Private *SiS_Pr)
 static void
 SiS_Handle760(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned int somebase;
    unsigned char temp1, temp2, temp3;
 
@@ -3170,11 +3136,7 @@ SiS_Handle760(struct SiS_Private *SiS_Pr)
        (!(SiS_Pr->SiS_SysFlags & SF_760UMA)) )
       return;
 
-#ifdef SIS_LINUX_KERNEL
    somebase = sisfb_read_mio_pci_word(SiS_Pr, 0x74);
-#else
-   somebase = pciReadWord(0x00001000, 0x74);
-#endif
    somebase &= 0xffff;
 
    if(somebase == 0) return;
@@ -3190,105 +3152,34 @@ SiS_Handle760(struct SiS_Private *SiS_Pr)
       temp2 = 0x0b;
    }
 
-#ifdef SIS_LINUX_KERNEL
    sisfb_write_nbridge_pci_byte(SiS_Pr, 0x7e, temp1);
    sisfb_write_nbridge_pci_byte(SiS_Pr, 0x8d, temp2);
-#else
-   pciWriteByte(0x00000000, 0x7e, temp1);
-   pciWriteByte(0x00000000, 0x8d, temp2);
-#endif
 
    SiS_SetRegByte((somebase + 0x85), temp3);
 #endif
 }
 
 /*********************************************/
-/*      X.org/XFree86: SET SCREEN PITCH      */
-/*********************************************/
-
-#ifdef SIS_XORG_XF86
-static void
-SiS_SetPitchCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   unsigned short HDisplay = pSiS->scrnPitch >> 3;
-
-   SiS_SetReg(SiS_Pr->SiS_P3d4,0x13,(HDisplay & 0xFF));
-   SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0E,0xF0,(HDisplay >> 8));
-}
-
-static void
-SiS_SetPitchCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   unsigned short HDisplay = pSiS->scrnPitch2 >> 3;
-
-    /* Unlock CRT2 */
-   if(pSiS->VGAEngine == SIS_315_VGA)
-      SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2F, 0x01);
-   else
-      SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24, 0x01);
-
-   SiS_SetReg(SiS_Pr->SiS_Part1Port,0x07,(HDisplay & 0xFF));
-   SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x09,0xF0,(HDisplay >> 8));
-}
-
-static void
-SiS_SetPitch(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   bool isslavemode = false;
-
-   if( (pSiS->VBFlags2 & VB2_VIDEOBRIDGE) &&
-       ( ((pSiS->VGAEngine == SIS_300_VGA) &&
-	  (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0xa0) == 0x20) ||
-	 ((pSiS->VGAEngine == SIS_315_VGA) &&
-	  (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x50) == 0x10) ) ) {
-      isslavemode = true;
-   }
-
-   /* We need to set pitch for CRT1 if bridge is in slave mode, too */
-   if((pSiS->VBFlags & DISPTYPE_DISP1) || (isslavemode)) {
-      SiS_SetPitchCRT1(SiS_Pr, pScrn);
-   }
-   /* We must not set the pitch for CRT2 if bridge is in slave mode */
-   if((pSiS->VBFlags & DISPTYPE_DISP2) && (!isslavemode)) {
-      SiS_SetPitchCRT2(SiS_Pr, pScrn);
-   }
-}
-#endif
-
-/*********************************************/
 /*                 SiSSetMode()              */
 /*********************************************/
 
-#ifdef SIS_XORG_XF86
-/* We need pScrn for setting the pitch correctly */
-bool
-SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo, bool dosetpitch)
-#else
 bool
 SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
-#endif
 {
    SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
    unsigned short RealModeNo, ModeIdIndex;
    unsigned char  backupreg = 0;
-#ifdef SIS_LINUX_KERNEL
    unsigned short KeepLockReg;
 
    SiS_Pr->UseCustomMode = false;
    SiS_Pr->CRT1UsesCustomMode = false;
-#endif
 
    SiS_Pr->SiS_flag_clearbuffer = 0;
 
    if(SiS_Pr->UseCustomMode) {
       ModeNo = 0xfe;
    } else {
-#ifdef SIS_LINUX_KERNEL
       if(!(ModeNo & 0x80)) SiS_Pr->SiS_flag_clearbuffer = 1;
-#endif
       ModeNo &= 0x7f;
    }
 
@@ -3301,13 +3192,8 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
    SiS_GetSysFlags(SiS_Pr);
 
    SiS_Pr->SiS_VGAINFO = 0x11;
-#if defined(SIS_XORG_XF86) && (defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__))
-   if(pScrn) SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#endif
 
-#ifdef SIS_LINUX_KERNEL
    KeepLockReg = SiS_GetReg(SiS_Pr->SiS_P3c4,0x05);
-#endif
    SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
 
    SiSInitPCIetc(SiS_Pr);
@@ -3344,12 +3230,10 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
    SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
    SiS_SetLowModeTest(SiS_Pr, ModeNo);
 
-#ifdef SIS_LINUX_KERNEL
    /* Check memory size (kernel framebuffer driver only) */
    if(!SiS_CheckMemorySize(SiS_Pr, ModeNo, ModeIdIndex)) {
       return false;
    }
-#endif
 
    SiS_OpenCRTC(SiS_Pr);
 
@@ -3384,7 +3268,7 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
    SiS_DisplayOn(SiS_Pr);
    SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
 	 if(!(SiS_IsDualEdge(SiS_Pr))) {
@@ -3396,7 +3280,7 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 
    if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
       if(SiS_Pr->ChipType >= SIS_315H) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	 if(!SiS_Pr->SiS_ROMNew) {
 	    if(SiS_IsVAMode(SiS_Pr)) {
 	       SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01);
@@ -3424,424 +3308,16 @@ SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
       }
    }
 
-#ifdef SIS_XORG_XF86
-   if(pScrn) {
-      /* SetPitch: Adapt to virtual size & position */
-      if((ModeNo > 0x13) && (dosetpitch)) {
-	 SiS_SetPitch(SiS_Pr, pScrn);
-      }
-
-      /* Backup/Set ModeNo in BIOS scratch area */
-      SiS_GetSetModeID(pScrn, ModeNo);
-   }
-#endif
-
    SiS_CloseCRTC(SiS_Pr);
 
    SiS_Handle760(SiS_Pr);
 
-#ifdef SIS_LINUX_KERNEL
    /* We never lock registers in XF86 */
    if(KeepLockReg != 0xA1) SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x00);
-#endif
 
    return true;
 }
 
-/*********************************************/
-/*       X.org/XFree86: SiSBIOSSetMode()     */
-/*           for non-Dual-Head mode          */
-/*********************************************/
-
-#ifdef SIS_XORG_XF86
-bool
-SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-               DisplayModePtr mode, bool IsCustom)
-{
-   SISPtr pSiS = SISPTR(pScrn);
-   unsigned short ModeNo = 0;
-
-   SiS_Pr->UseCustomMode = false;
-
-   if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting custom mode %dx%d\n",
-		SiS_Pr->CHDisplay,
-		(mode->Flags & V_INTERLACE ? SiS_Pr->CVDisplay * 2 :
-		   (mode->Flags & V_DBLSCAN ? SiS_Pr->CVDisplay / 2 :
-		      SiS_Pr->CVDisplay)));
-
-   } else {
-
-      /* Don't need vbflags here; checks done earlier */
-      ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags);
-      if(!ModeNo) return false;
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting standard mode 0x%x\n", ModeNo);
-
-   }
-
-   return(SiSSetMode(SiS_Pr, pScrn, ModeNo, true));
-}
-
-/*********************************************/
-/*    X.org/XFree86: SiSBIOSSetModeCRT2()    */
-/*           for Dual-Head modes             */
-/*********************************************/
-
-bool
-SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-               DisplayModePtr mode, bool IsCustom)
-{
-   SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
-   SISPtr  pSiS = SISPTR(pScrn);
-#ifdef SISDUALHEAD
-   SISEntPtr pSiSEnt = pSiS->entityPrivate;
-#endif
-   unsigned short ModeIdIndex;
-   unsigned short ModeNo = 0;
-   unsigned char  backupreg = 0;
-
-   SiS_Pr->UseCustomMode = false;
-
-   /* Remember: Custom modes for CRT2 are ONLY supported
-    *     -) on the 30x/B/C, and
-    *     -) if CRT2 is LCD or VGA, or CRT1 is LCDA
-    */
-
-   if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
-	 ModeNo = 0xfe;
-
-   } else {
-
-	 ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags);
-	 if(!ModeNo) return false;
-
-   }
-
-   SiSRegInit(SiS_Pr, BaseAddr);
-   SiSInitPtr(SiS_Pr);
-   SiS_GetSysFlags(SiS_Pr);
-#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)
-   SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#else
-   SiS_Pr->SiS_VGAINFO = 0x11;
-#endif
-
-   SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
-
-   SiSInitPCIetc(SiS_Pr);
-   SiSSetLVDSetc(SiS_Pr);
-   SiSDetermineROMUsage(SiS_Pr);
-
-   /* Save mode info so we can set it from within SetMode for CRT1 */
-#ifdef SISDUALHEAD
-   if(pSiS->DualHeadMode) {
-      pSiSEnt->CRT2ModeNo = ModeNo;
-      pSiSEnt->CRT2DMode = mode;
-      pSiSEnt->CRT2IsCustom = IsCustom;
-      pSiSEnt->CRT2CR30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30);
-      pSiSEnt->CRT2CR31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31);
-      pSiSEnt->CRT2CR35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-      pSiSEnt->CRT2CR38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-#if 0
-      /* We can't set CRT2 mode before CRT1 mode is set - says who...? */
-      if(pSiSEnt->CRT1ModeNo == -1) {
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-		"Setting CRT2 mode delayed until after setting CRT1 mode\n");
-	 return true;
-      }
-#endif
-      pSiSEnt->CRT2ModeSet = true;
-   }
-#endif
-
-   if(SiS_Pr->UseCustomMode) {
-
-      unsigned short temptemp = SiS_Pr->CVDisplay;
-
-      if(SiS_Pr->CModeFlag & DoubleScanMode)     temptemp >>= 1;
-      else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1;
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	  "Setting custom mode %dx%d on CRT2\n",
-	  SiS_Pr->CHDisplay, temptemp);
-
-   } else {
-
-      xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	  "Setting standard mode 0x%x on CRT2\n", ModeNo);
-
-   }
-
-   SiS_UnLockCRT2(SiS_Pr);
-
-   if(!SiS_Pr->UseCustomMode) {
-      if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false;
-   } else {
-      ModeIdIndex = 0;
-   }
-
-   SiS_GetVBType(SiS_Pr);
-
-   SiS_InitVB(SiS_Pr);
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-	 SiS_ResetVB(SiS_Pr);
-	 SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x32,0x10);
-	 SiS_SetRegOR(SiS_Pr->SiS_Part2Port,0x00,0x0c);
-	 backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-      } else {
-	 backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-      }
-   }
-
-   /* Get VB information (connectors, connected devices) */
-   if(!SiS_Pr->UseCustomMode) {
-      SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 1);
-   } else {
-      /* If this is a custom mode, we don't check the modeflag for CRT2Mode */
-      SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0);
-   }
-   SiS_SetYPbPr(SiS_Pr);
-   SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_SetLowModeTest(SiS_Pr, ModeNo);
-
-   SiS_ResetSegmentRegisters(SiS_Pr);
-
-   /* Set mode on CRT2 */
-   if( (SiS_Pr->SiS_VBType & VB_SISVB)    ||
-       (SiS_Pr->SiS_IF_DEF_LVDS     == 1) ||
-       (SiS_Pr->SiS_IF_DEF_CH70xx   != 0) ||
-       (SiS_Pr->SiS_IF_DEF_TRUMPION != 0) ) {
-      SiS_SetCRT2Group(SiS_Pr, ModeNo);
-   }
-
-   SiS_StrangeStuff(SiS_Pr);
-
-   SiS_DisplayOn(SiS_Pr);
-   SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-
-   if(SiS_Pr->ChipType >= SIS_315H) {
-      if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
-	 if(!(SiS_IsDualEdge(SiS_Pr))) {
-	    SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xfb);
-	 }
-      }
-   }
-
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-	 if(!SiS_Pr->SiS_ROMNew) {
-	    if(SiS_IsVAMode(SiS_Pr)) {
-	       SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01);
-	    } else {
-	       SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x35,0xFE);
-	    }
-	 }
-
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg);
-
-	 if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x30) & SetCRT2ToLCD) {
-	    SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x38,0xfc);
-	 }
-      } else if((SiS_Pr->ChipType == SIS_630) ||
-	        (SiS_Pr->ChipType == SIS_730)) {
-         SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg);
-      }
-   }
-
-   /* SetPitch: Adapt to virtual size & position */
-   SiS_SetPitchCRT2(SiS_Pr, pScrn);
-
-   SiS_Handle760(SiS_Pr);
-
-   return true;
-}
-
-/*********************************************/
-/*    X.org/XFree86: SiSBIOSSetModeCRT1()    */
-/*           for Dual-Head modes             */
-/*********************************************/
-
-bool
-SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-                   DisplayModePtr mode, bool IsCustom)
-{
-   SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
-   SISPtr  pSiS = SISPTR(pScrn);
-   unsigned short ModeIdIndex, ModeNo = 0;
-   unsigned char  backupreg = 0;
-#ifdef SISDUALHEAD
-   SISEntPtr pSiSEnt = pSiS->entityPrivate;
-   unsigned char  backupcr30, backupcr31, backupcr38, backupcr35, backupp40d=0;
-   bool backupcustom;
-#endif
-
-   SiS_Pr->UseCustomMode = false;
-
-   if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
-	 unsigned short temptemp = SiS_Pr->CVDisplay;
-
-	 if(SiS_Pr->CModeFlag & DoubleScanMode)     temptemp >>= 1;
-	 else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1;
-
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	 	"Setting custom mode %dx%d on CRT1\n",
-	 	SiS_Pr->CHDisplay, temptemp);
-	 ModeNo = 0xfe;
-
-   } else {
-
-	 ModeNo = SiS_GetModeNumber(pScrn, mode, 0); /* don't give VBFlags */
-	 if(!ModeNo) return false;
-
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-	 	"Setting standard mode 0x%x on CRT1\n", ModeNo);
-   }
-
-   SiSInitPtr(SiS_Pr);
-   SiSRegInit(SiS_Pr, BaseAddr);
-   SiS_GetSysFlags(SiS_Pr);
-#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)
-   SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#else
-   SiS_Pr->SiS_VGAINFO = 0x11;
-#endif
-
-   SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
-
-   SiSInitPCIetc(SiS_Pr);
-   SiSSetLVDSetc(SiS_Pr);
-   SiSDetermineROMUsage(SiS_Pr);
-
-   SiS_UnLockCRT2(SiS_Pr);
-
-   if(!SiS_Pr->UseCustomMode) {
-      if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false;
-   } else {
-      ModeIdIndex = 0;
-   }
-
-   /* Determine VBType */
-   SiS_GetVBType(SiS_Pr);
-
-   SiS_InitVB(SiS_Pr);
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-         backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-      } else {
-         backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-      }
-   }
-
-   /* Get VB information (connectors, connected devices) */
-   /* (We don't care if the current mode is a CRT2 mode) */
-   SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0);
-   SiS_SetYPbPr(SiS_Pr);
-   SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
-   SiS_SetLowModeTest(SiS_Pr, ModeNo);
-
-   SiS_OpenCRTC(SiS_Pr);
-
-   /* Set mode on CRT1 */
-   SiS_SetCRT1Group(SiS_Pr, ModeNo, ModeIdIndex);
-   if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
-      SiS_SetCRT2Group(SiS_Pr, ModeNo);
-   }
-
-   /* SetPitch: Adapt to virtual size & position */
-   SiS_SetPitchCRT1(SiS_Pr, pScrn);
-
-   SiS_HandleCRT1(SiS_Pr);
-
-   SiS_StrangeStuff(SiS_Pr);
-
-   SiS_CloseCRTC(SiS_Pr);
-
-#ifdef SISDUALHEAD
-   if(pSiS->DualHeadMode) {
-      pSiSEnt->CRT1ModeNo = ModeNo;
-      pSiSEnt->CRT1DMode = mode;
-   }
-#endif
-
-   if(SiS_Pr->UseCustomMode) {
-      SiS_Pr->CRT1UsesCustomMode = true;
-      SiS_Pr->CSRClock_CRT1 = SiS_Pr->CSRClock;
-      SiS_Pr->CModeFlag_CRT1 = SiS_Pr->CModeFlag;
-   } else {
-      SiS_Pr->CRT1UsesCustomMode = false;
-   }
-
-   /* Reset CRT2 if changing mode on CRT1 */
-#ifdef SISDUALHEAD
-   if(pSiS->DualHeadMode) {
-      if(pSiSEnt->CRT2ModeNo != -1) {
-	 xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
-				"(Re-)Setting mode for CRT2\n");
-	 backupcustom = SiS_Pr->UseCustomMode;
-	 backupcr30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30);
-	 backupcr31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31);
-	 backupcr35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
-	 backupcr38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-	 if(SiS_Pr->SiS_VBType & VB_SISVB) {
-	    /* Backup LUT-enable */
-	    if(pSiSEnt->CRT2ModeSet) {
-	       backupp40d = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x0d) & 0x08;
-	    }
-	 }
-	 if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,pSiSEnt->CRT2CR30);
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,pSiSEnt->CRT2CR31);
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,pSiSEnt->CRT2CR35);
-	    SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,pSiSEnt->CRT2CR38);
-	 }
-
-	 SiSBIOSSetModeCRT2(SiS_Pr, pSiSEnt->pScrn_1,
-			    pSiSEnt->CRT2DMode, pSiSEnt->CRT2IsCustom);
-
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,backupcr30);
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,backupcr31);
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupcr35);
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupcr38);
-	 if(SiS_Pr->SiS_VBType & VB_SISVB) {
-	    SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x0d, ~0x08, backupp40d);
-	 }
-	 SiS_Pr->UseCustomMode = backupcustom;
-      }
-   }
-#endif
-
-   /* Warning: From here, the custom mode entries in SiS_Pr are
-    * possibly overwritten
-    */
-
-   SiS_DisplayOn(SiS_Pr);
-   SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-
-   if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
-      if(SiS_Pr->ChipType >= SIS_315H) {
-	 SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg);
-      } else if((SiS_Pr->ChipType == SIS_630) ||
-                (SiS_Pr->ChipType == SIS_730)) {
-         SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg);
-      }
-   }
-
-   SiS_Handle760(SiS_Pr);
-
-   /* Backup/Set ModeNo in BIOS scratch area */
-   SiS_GetSetModeID(pScrn,ModeNo);
-
-   return true;
-}
-#endif /* Linux_XF86 */
-
 #ifndef GETBITSTR
 #define BITMASK(h,l)    	(((unsigned)(1U << ((h)-(l)+1))-1)<<(l))
 #define GENMASK(mask)   	BITMASK(1?mask,0?mask)
@@ -3927,7 +3403,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    SiS_Pr->CVBlankStart = SiS_Pr->SiS_VGAVDE;
 
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       tempbx = SiS_Pr->SiS_VGAHT;
       if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
          tempbx = SiS_Pr->PanelHT;
@@ -3936,7 +3412,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       remaining = tempbx % 8;
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       /* OK for LCDA, LVDS */
       tempbx = SiS_Pr->PanelHT - SiS_Pr->PanelXRes;
       tempax = SiS_Pr->SiS_VGAHDE;  /* not /2 ! */
@@ -3950,7 +3426,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    SiS_Pr->CHTotal = SiS_Pr->CHBlankEnd = tempbx;
 
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       if(SiS_Pr->SiS_VGAHDE == SiS_Pr->PanelXRes) {
 	 SiS_Pr->CHSyncStart = SiS_Pr->SiS_VGAHDE + ((SiS_Pr->PanelHRS + 1) & ~1);
 	 SiS_Pr->CHSyncEnd = SiS_Pr->CHSyncStart + SiS_Pr->PanelHRE;
@@ -3982,7 +3458,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
       }
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       tempax = VGAHDE;
       if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
 	 tempbx = SiS_Pr->PanelXRes;
@@ -4001,7 +3477,7 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
       tempax = SiS_Pr->PanelYRes;
    } else if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       /* Stupid hack for 640x400/320x200 */
       if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768) {
 	 if((tempax + tempbx) == 438) tempbx += 16;
@@ -4054,36 +3530,12 @@ SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
    if(modeflag & DoubleScanMode) tempax |= 0x80;
    SiS_SetRegANDOR(SiS_Pr->SiS_P3d4,0x09,0x5F,tempax);
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "%d %d %d %d  %d %d %d %d  (%d %d %d %d)\n",
-	SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal,
-	SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal,
-	SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd);
-   xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1],
-	SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3],
-	SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5],
-	SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9],
-	SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11],
-	SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13],
-	SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]);
-#endif
-#endif
 }
 
 void
 SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 			int xres, int yres,
-#ifdef SIS_XORG_XF86
-			DisplayModePtr current
-#endif
-#ifdef SIS_LINUX_KERNEL
 			struct fb_var_screeninfo *var, bool writeres
-#endif
 )
 {
    unsigned short HRE, HBE, HRS, HBS, HDE, HT;
@@ -4127,25 +3579,10 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 
    D = B - F - C;
 
-#ifdef SIS_XORG_XF86
-   current->HDisplay   = (E * 8);
-   current->HSyncStart = (E * 8) + (F * 8);
-   current->HSyncEnd   = (E * 8) + (F * 8) + (C * 8);
-   current->HTotal     = (E * 8) + (F * 8) + (C * 8) + (D * 8);
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO,
-		"H: A %d B %d C %d D %d E %d F %d  HT %d HDE %d HRS %d HBS %d HBE %d HRE %d\n",
-		A, B, C, D, E, F, HT, HDE, HRS, HBS, HBE, HRE);
-#else
-   (void)VBS;  (void)HBS;  (void)A;
-#endif
-#endif
-#ifdef SIS_LINUX_KERNEL
    if(writeres) var->xres = xres = E * 8;
    var->left_margin = D * 8;
    var->right_margin = F * 8;
    var->hsync_len = C * 8;
-#endif
 
    /* Vertical */
    sr_data = crdata[13];
@@ -4192,30 +3629,10 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 
    D = B - F - C;
 
-#ifdef SIS_XORG_XF86
-   current->VDisplay   = VDE + 1;
-   current->VSyncStart = VRS + 1;
-   current->VSyncEnd   = ((VRS & ~0x1f) | VRE) + 1;
-   if(VRE <= (VRS & 0x1f)) current->VSyncEnd += 32;
-   current->VTotal     = E + D + C + F;
-#if 0
-   current->VDisplay   = E;
-   current->VSyncStart = E + D;
-   current->VSyncEnd   = E + D + C;
-   current->VTotal     = E + D + C + F;
-#endif
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO,
-	"V: A %d B %d C %d D %d E %d F %d  VT %d VDE %d VRS %d VBS %d VBE %d VRE %d\n",
-	A, B, C, D, E, F, VT, VDE, VRS, VBS, VBE, VRE);
-#endif
-#endif
-#ifdef SIS_LINUX_KERNEL
    if(writeres) var->yres = yres = E;
    var->upper_margin = D;
    var->lower_margin = F;
    var->vsync_len = C;
-#endif
 
    if((xres == 320) && ((yres == 200) || (yres == 240))) {
 	/* Terrible hack, but correct CRTC data for
@@ -4224,17 +3641,9 @@ SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
 	 * a negative D. The CRT controller does not
 	 * seem to like correcting HRE to 50)
 	 */
-#ifdef SIS_XORG_XF86
-      current->HDisplay   = 320;
-      current->HSyncStart = 328;
-      current->HSyncEnd   = 376;
-      current->HTotal     = 400;
-#endif
-#ifdef SIS_LINUX_KERNEL
       var->left_margin = (400 - 376);
       var->right_margin = (328 - 320);
       var->hsync_len = (376 - 328);
-#endif
 
    }
 
diff --git a/drivers/video/sis/init.h b/drivers/video/sis/init.h
index b96005c39c6..aff73842d87 100644
--- a/drivers/video/sis/init.h
+++ b/drivers/video/sis/init.h
@@ -53,21 +53,8 @@
 #ifndef _INIT_H_
 #define _INIT_H_
 
-#include "osdef.h"
 #include "initdef.h"
 
-#ifdef SIS_XORG_XF86
-#include "sis.h"
-#define SIS_NEED_inSISREG
-#define SIS_NEED_inSISREGW
-#define SIS_NEED_inSISREGL
-#define SIS_NEED_outSISREG
-#define SIS_NEED_outSISREGW
-#define SIS_NEED_outSISREGL
-#include "sis_regs.h"
-#endif
-
-#ifdef SIS_LINUX_KERNEL
 #include "vgatypes.h"
 #include "vstruct.h"
 #ifdef SIS_CP
@@ -78,7 +65,6 @@
 #include <linux/fb.h>
 #include "sis.h"
 #include <video/sisfb.h>
-#endif
 
 /* Mode numbers */
 static const unsigned short ModeIndex_320x200[]      = {0x59, 0x41, 0x00, 0x4f};
@@ -286,7 +272,7 @@ static const struct SiS_ModeResInfo_S SiS_ModeResInfo[] =
 	{ 1280, 854, 8,16}    /* 0x22 */
 };
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static const struct SiS_StandTable_S SiS_StandTable[]=
 {
 /* 0x00: MD_0_200 */
@@ -1521,10 +1507,6 @@ static const struct SiS_LVDSCRT1Data SiS_LVDSCRT1640x480_1_H[] =
 };
 
 bool		SiSInitPtr(struct SiS_Private *SiS_Pr);
-#ifdef SIS_XORG_XF86
-unsigned short	SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay,
-				int Depth, bool FSTN, int LCDwith, int LCDheight);
-#endif
 unsigned short	SiS_GetModeID_LCD(int VGAEngine, unsigned int VBFlags, int HDisplay,
 				int VDisplay, int Depth, bool FSTN,
 				unsigned short CustomT, int LCDwith, int LCDheight,
@@ -1534,33 +1516,14 @@ unsigned short	SiS_GetModeID_TV(int VGAEngine, unsigned int VBFlags, int HDispla
 unsigned short	SiS_GetModeID_VGA2(int VGAEngine, unsigned int VBFlags, int HDisplay,
 				int VDisplay, int Depth, unsigned int VBFlags2);
 
-void		SiS_SetReg(SISIOADDRESS port, unsigned short index, unsigned short data);
-void		SiS_SetRegByte(SISIOADDRESS port, unsigned short data);
-void		SiS_SetRegShort(SISIOADDRESS port, unsigned short data);
-void		SiS_SetRegLong(SISIOADDRESS port, unsigned int data);
-unsigned char	SiS_GetReg(SISIOADDRESS port, unsigned short index);
-unsigned char	SiS_GetRegByte(SISIOADDRESS port);
-unsigned short	SiS_GetRegShort(SISIOADDRESS port);
-unsigned int	SiS_GetRegLong(SISIOADDRESS port);
-void		SiS_SetRegANDOR(SISIOADDRESS Port, unsigned short Index, unsigned short DataAND,
-				unsigned short DataOR);
-void		SiS_SetRegAND(SISIOADDRESS Port,unsigned short Index, unsigned short DataAND);
-void		SiS_SetRegOR(SISIOADDRESS Port,unsigned short Index, unsigned short DataOR);
-
 void		SiS_DisplayOn(struct SiS_Private *SiS_Pr);
 void		SiS_DisplayOff(struct SiS_Private *SiS_Pr);
 void		SiSRegInit(struct SiS_Private *SiS_Pr, SISIOADDRESS BaseAddr);
-#ifndef SIS_LINUX_KERNEL
-void		SiSSetLVDSetc(struct SiS_Private *SiS_Pr);
-#endif
 void		SiS_SetEnableDstn(struct SiS_Private *SiS_Pr, int enable);
 void		SiS_SetEnableFstn(struct SiS_Private *SiS_Pr, int enable);
 unsigned short	SiS_GetModeFlag(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 				unsigned short ModeIdIndex);
 bool		SiSDetermineROMLayout661(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_GetVBType(struct SiS_Private *SiS_Pr);
-#endif
 
 bool		SiS_SearchModeID(struct SiS_Private *SiS_Pr, unsigned short *ModeNo,
 				unsigned short *ModeIdIndex);
@@ -1572,37 +1535,19 @@ unsigned short	SiS_GetColorDepth(struct SiS_Private *SiS_Pr, unsigned short Mode
 				unsigned short ModeIdIndex);
 unsigned short	SiS_GetOffset(struct SiS_Private *SiS_Pr,unsigned short ModeNo,
 				unsigned short ModeIdIndex, unsigned short RRTI);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 void		SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *idx1,
 				unsigned short *idx2);
 unsigned short	SiS_GetFIFOThresholdB300(unsigned short idx1, unsigned short idx2);
 unsigned short	SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index);
 #endif
 void		SiS_LoadDAC(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex);
-#ifdef SIS_XORG_XF86
-bool		SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo,
-				bool dosetpitch);
-bool		SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-				DisplayModePtr mode, bool IsCustom);
-bool		SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-				DisplayModePtr mode, bool IsCustom);
-bool		SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
-				DisplayModePtr mode, bool IsCustom);
-#endif
-#ifdef SIS_LINUX_KERNEL
 bool		SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
-#endif
 void		SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth);
 void		SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 				unsigned short ModeIdIndex);
-#ifdef SIS_XORG_XF86
-void		SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres,
-				int yres, DisplayModePtr current);
-#endif
-#ifdef SIS_LINUX_KERNEL
 void		SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata, int xres,
 				int yres, struct fb_var_screeninfo *var, bool writeres);
-#endif
 
 /* From init301.c: */
 extern void		SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
@@ -1626,29 +1571,16 @@ extern unsigned short	SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short
 extern bool		SiS_IsVAMode(struct SiS_Private *);
 extern bool		SiS_IsDualEdge(struct SiS_Private *);
 
-#ifdef SIS_XORG_XF86
-/* From other modules: */
-extern unsigned short	SiS_CheckBuildCustomMode(ScrnInfoPtr pScrn, DisplayModePtr mode,
-				unsigned int VBFlags);
-extern unsigned char	SiS_GetSetBIOSScratch(ScrnInfoPtr pScrn, unsigned short offset,
-				unsigned char value);
-extern unsigned char	SiS_GetSetModeID(ScrnInfoPtr pScrn, unsigned char id);
-extern unsigned short 	SiS_GetModeNumber(ScrnInfoPtr pScrn, DisplayModePtr mode,
-				unsigned int VBFlags);
-#endif
-
-#ifdef SIS_LINUX_KERNEL
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 extern unsigned int	sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg);
 extern void		sisfb_write_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg,
 				unsigned int val);
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 extern void		sisfb_write_nbridge_pci_byte(struct SiS_Private *SiS_Pr, int reg,
 				unsigned char val);
 extern unsigned int	sisfb_read_mio_pci_word(struct SiS_Private *SiS_Pr, int reg);
 #endif
-#endif
 
 #endif
 
diff --git a/drivers/video/sis/init301.c b/drivers/video/sis/init301.c
index da33d801c22..a89e3cafd5a 100644
--- a/drivers/video/sis/init301.c
+++ b/drivers/video/sis/init301.c
@@ -57,10 +57,6 @@
  *
  */
 
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
 #if 1
 #define SET_EMI		/* 302LV/ELV: Set EMI values */
 #endif
@@ -75,11 +71,11 @@
 
 #include "init301.h"
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 #include "oem300.h"
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 #include "oem310.h"
 #endif
 
@@ -87,9 +83,7 @@
 #define SiS_I2CDELAYSHORT  150
 
 static unsigned short	SiS_GetBIOSLCDResInfo(struct SiS_Private *SiS_Pr);
-#ifdef SIS_LINUX_KERNEL
 static void		SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
-#endif
 
 /*********************************************/
 /*         HELPER: Lock/Unlock CRT2          */
@@ -106,9 +100,7 @@ SiS_UnLockCRT2(struct SiS_Private *SiS_Pr)
       SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24,0x01);
 }
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_LockCRT2(struct SiS_Private *SiS_Pr)
 {
@@ -138,7 +130,7 @@ SiS_SetRegSR11ANDOR(struct SiS_Private *SiS_Pr, unsigned short DataAND, unsigned
 /*    HELPER: Get Pointer to LCD structure   */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static unsigned char *
 GetLCDStructPtr661(struct SiS_Private *SiS_Pr)
 {
@@ -404,7 +396,7 @@ SiS_SaveCRT2Info(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 /*    HELPER: GET SOME DATA FROM BIOS ROM    */
 /*********************************************/
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static bool
 SiS_CR36BIOSWord23b(struct SiS_Private *SiS_Pr)
 {
@@ -449,7 +441,7 @@ SiS_DDC2Delay(struct SiS_Private *SiS_Pr, unsigned int delaytime)
       SiS_GetReg(SiS_Pr->SiS_P3c4, 0x05);
 }
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 SiS_GenericDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 {
@@ -457,7 +449,7 @@ SiS_GenericDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_LongDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 {
@@ -467,7 +459,7 @@ SiS_LongDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 }
 #endif
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 SiS_ShortDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 {
@@ -480,14 +472,14 @@ SiS_ShortDelay(struct SiS_Private *SiS_Pr, unsigned short delay)
 static void
 SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime)
 {
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
    unsigned char  *ROMAddr = SiS_Pr->VirtualRomBase;
    unsigned short PanelID, DelayIndex, Delay=0;
 #endif
 
    if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 
       PanelID = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36);
       if(SiS_Pr->SiS_VBType & VB_SISVB) {
@@ -513,11 +505,11 @@ SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime)
       }
       SiS_ShortDelay(SiS_Pr, Delay);
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
    } else {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 
       if((SiS_Pr->ChipType >= SIS_661)    ||
 	 (SiS_Pr->ChipType <= SIS_315PRO) ||
@@ -579,12 +571,12 @@ SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime)
 
       }
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
    }
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_PanelDelayLoop(struct SiS_Private *SiS_Pr, unsigned short DelayTime, unsigned short DelayLoop)
 {
@@ -613,7 +605,7 @@ SiS_WaitRetrace1(struct SiS_Private *SiS_Pr)
    while((!(SiS_GetRegByte(SiS_Pr->SiS_P3da) & 0x08)) && --watchdog);
 }
 
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
 static void
 SiS_WaitRetrace2(struct SiS_Private *SiS_Pr, unsigned short reg)
 {
@@ -630,7 +622,7 @@ static void
 SiS_WaitVBRetrace(struct SiS_Private *SiS_Pr)
 {
    if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
       if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
 	 if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x20)) return;
       }
@@ -641,7 +633,7 @@ SiS_WaitVBRetrace(struct SiS_Private *SiS_Pr)
       }
 #endif
    } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       if(!(SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x40)) {
 	 SiS_WaitRetrace1(SiS_Pr);
       } else {
@@ -686,7 +678,7 @@ SiS_VBLongWait(struct SiS_Private *SiS_Pr)
 /*               HELPER: MISC                */
 /*********************************************/
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static bool
 SiS_Is301B(struct SiS_Private *SiS_Pr)
 {
@@ -708,7 +700,7 @@ SiS_CRT2IsLCD(struct SiS_Private *SiS_Pr)
 bool
 SiS_IsDualEdge(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if((SiS_Pr->ChipType != SIS_650) || (SiS_GetReg(SiS_Pr->SiS_P3d4,0x5f) & 0xf0)) {
 	 if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x38) & EnableDualEdge) return true;
@@ -721,7 +713,7 @@ SiS_IsDualEdge(struct SiS_Private *SiS_Pr)
 bool
 SiS_IsVAMode(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned short flag;
 
    if(SiS_Pr->ChipType >= SIS_315H) {
@@ -732,7 +724,7 @@ SiS_IsVAMode(struct SiS_Private *SiS_Pr)
    return false;
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsVAorLCD(struct SiS_Private *SiS_Pr)
 {
@@ -745,7 +737,7 @@ SiS_IsVAorLCD(struct SiS_Private *SiS_Pr)
 static bool
 SiS_IsDualLink(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if((SiS_CRT2IsLCD(SiS_Pr)) ||
          (SiS_IsVAMode(SiS_Pr))) {
@@ -756,7 +748,7 @@ SiS_IsDualLink(struct SiS_Private *SiS_Pr)
    return false;
 }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_TVEnabled(struct SiS_Private *SiS_Pr)
 {
@@ -768,7 +760,7 @@ SiS_TVEnabled(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_LCDAEnabled(struct SiS_Private *SiS_Pr)
 {
@@ -777,7 +769,7 @@ SiS_LCDAEnabled(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_WeHaveBacklightCtrl(struct SiS_Private *SiS_Pr)
 {
@@ -788,7 +780,7 @@ SiS_WeHaveBacklightCtrl(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsNotM650orLater(struct SiS_Private *SiS_Pr)
 {
@@ -804,7 +796,7 @@ SiS_IsNotM650orLater(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsYPbPr(struct SiS_Private *SiS_Pr)
 {
@@ -816,7 +808,7 @@ SiS_IsYPbPr(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsChScart(struct SiS_Private *SiS_Pr)
 {
@@ -828,7 +820,7 @@ SiS_IsChScart(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsTVOrYPbPrOrScart(struct SiS_Private *SiS_Pr)
 {
@@ -848,7 +840,7 @@ SiS_IsTVOrYPbPrOrScart(struct SiS_Private *SiS_Pr)
 }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static bool
 SiS_IsLCDOrLCDA(struct SiS_Private *SiS_Pr)
 {
@@ -914,7 +906,7 @@ SiS_BridgeInSlavemode(struct SiS_Private *SiS_Pr)
 /*********************************************/
 
 /* Setup general purpose IO for Chrontel communication */
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 void
 SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo)
 {
@@ -923,11 +915,7 @@ SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo)
 
    if(!(SiS_Pr->SiS_ChSW)) return;
 
-#ifdef SIS_LINUX_KERNEL
    acpibase = sisfb_read_lpc_pci_dword(SiS_Pr, 0x74);
-#else
-   acpibase = pciReadLong(0x00000800, 0x74);
-#endif
    acpibase &= 0xFFFF;
    if(!acpibase) return;
    temp = SiS_GetRegShort((acpibase + 0x3c));	/* ACPI register 0x3c: GP Event 1 I/O mode select */
@@ -969,7 +957,7 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 	tempax &= (DriverMode | LoadDACFlag | SetNotSimuMode | SetPALTV);
 	tempbx |= tempax;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	if(SiS_Pr->ChipType >= SIS_315H) {
 	   if(SiS_Pr->SiS_VBType & VB_SISLCDA) {
 	      if(ModeNo == 0x03) {
@@ -1019,7 +1007,7 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 	   }
 	}
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
         if(!(SiS_Pr->SiS_VBType & VB_SISVGA2)) {
 	   tempbx &= ~(SetCRT2ToRAMDAC);
@@ -1154,24 +1142,16 @@ SiS_GetVBInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo,
 
    SiS_Pr->SiS_VBInfo = tempbx;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    if(SiS_Pr->ChipType == SIS_630) {
       SiS_SetChrontelGPIO(SiS_Pr, SiS_Pr->SiS_VBInfo);
    }
 #endif
 
-#ifdef SIS_LINUX_KERNEL
 #if 0
    printk(KERN_DEBUG "sisfb: (init301: VBInfo= 0x%04x, SetFlag=0x%04x)\n",
       SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
 #endif
-#endif
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_PROBED, "(init301: VBInfo=0x%04x, SetFlag=0x%04x)\n",
-      SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
-#endif
-#endif
 }
 
 /*********************************************/
@@ -1415,12 +1395,6 @@ SiS_SetTVMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
    }
 
    SiS_Pr->SiS_VBInfo &= ~SetPALTV;
-
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "(init301: TVMode %x, VBInfo %x)\n", SiS_Pr->SiS_TVMode, SiS_Pr->SiS_VBInfo);
-#endif
-#endif
 }
 
 /*********************************************/
@@ -1443,22 +1417,10 @@ SiS_GetBIOSLCDResInfo(struct SiS_Private *SiS_Pr)
 static void
 SiS_GetLCDInfoBIOS(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    unsigned char  *ROMAddr;
    unsigned short temp;
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "Paneldata driver: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n",
-	SiS_Pr->PanelHT, SiS_Pr->PanelVT,
-	SiS_Pr->PanelHRS, SiS_Pr->PanelHRE,
-	SiS_Pr->PanelVRS, SiS_Pr->PanelVRE,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B);
-#endif
-#endif
-
    if((ROMAddr = GetLCDStructPtr661(SiS_Pr))) {
       if((temp = SISGETROMW(6)) != SiS_Pr->PanelHT) {
 	 SiS_Pr->SiS_NeedRomModeData = true;
@@ -1480,18 +1442,6 @@ SiS_GetLCDInfoBIOS(struct SiS_Private *SiS_Pr)
       SiS_Pr->SiS_VCLKData[VCLK_CUSTOM_315].SR2C =
 	 SiS_Pr->SiS_VBVCLKData[VCLK_CUSTOM_315].Part4_B = ROMAddr[20];
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-      xf86DrvMsg(0, X_INFO, "Paneldata BIOS:  [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n",
-	SiS_Pr->PanelHT, SiS_Pr->PanelVT,
-	SiS_Pr->PanelHRS, SiS_Pr->PanelHRE,
-	SiS_Pr->PanelVRS, SiS_Pr->PanelVRE,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A,
-	SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B);
-#endif
-#endif
-
    }
 #endif
 }
@@ -1517,13 +1467,13 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
 {
   unsigned short temp,modeflag,resinfo=0,modexres=0,modeyres=0;
   bool panelcanscale = false;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
   static const unsigned char SiS300SeriesLCDRes[] =
           { 0,  1,  2,  3,  7,  4,  5,  8,
 	    0,  0, 10,  0,  0,  0,  0, 15 };
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned char   *myptr = NULL;
 #endif
 
@@ -1562,7 +1512,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
      SiS_Pr->SiS_LCDTypeInfo = (temp & 0x0F) - 1;
   }
   temp &= 0x0f;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->ChipType < SIS_315H) {
      /* Very old BIOSes only know 7 sizes (NetVista 2179, 1.01g) */
      if(SiS_Pr->SiS_VBType & VB_SIS301) {
@@ -1574,7 +1524,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
 #endif
 
   /* Translate to our internal types */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->ChipType == SIS_550) {
      if     (temp == Panel310_1152x768)  temp = Panel_320x240_2; /* Verified working */
      else if(temp == Panel310_320x240_2) temp = Panel_320x240_2;
@@ -1597,7 +1547,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
 
   SiS_Pr->SiS_LCDResInfo = temp;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
      if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) {
 	SiS_Pr->SiS_LCDResInfo = Panel_Barco1366;
@@ -1639,7 +1589,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
   else if(SiS_Pr->UsePanelScaler == 1) SiS_Pr->SiS_LCDInfo |= DontExpandLCD;
 
   /* Dual link, Pass 1:1 BIOS default, etc. */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->ChipType >= SIS_661) {
      if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
 	if(temp & 0x08) SiS_Pr->SiS_LCDInfo |= LCDPass11;
@@ -2076,7 +2026,7 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
      }
   }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
      if(SiS_Pr->SiS_CustomT == CUT_PANEL848 || SiS_Pr->SiS_CustomT == CUT_PANEL856) {
 	SiS_Pr->SiS_LCDInfo = 0x80 | 0x40 | 0x20;   /* neg h/v sync, RGB24(D0 = 0) */
@@ -2186,17 +2136,10 @@ SiS_GetLCDResInfo(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned sh
      SiS_Pr->SiS_SetFlag |= LCDVESATiming;
   }
 
-#ifdef SIS_LINUX_KERNEL
 #if 0
   printk(KERN_DEBUG "sisfb: (LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x)\n",
 	SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo);
 #endif
-#endif
-#ifdef SIS_XORG_XF86
-  xf86DrvMsgVerb(0, X_PROBED, 4,
-	"(init301: LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x SetFlag=0x%04x)\n",
-	SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo, SiS_Pr->SiS_SetFlag);
-#endif
 }
 
 /*********************************************/
@@ -2359,7 +2302,7 @@ SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 	      VCLKIndex = SiS_Pr->PanelVCLKIdx315;
 	   }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   /* Special Timing: Barco iQ Pro R series */
 	   if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) VCLKIndex = 0x44;
 
@@ -2410,12 +2353,6 @@ SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 
   }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-  xf86DrvMsg(0, X_INFO, "VCLKIndex %d (0x%x)\n", VCLKIndex, VCLKIndex);
-#endif
-#endif
-
   return VCLKIndex;
 }
 
@@ -2428,10 +2365,10 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 {
   unsigned short i, j, modeflag, tempah=0;
   short tempcl;
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
   unsigned short tempbl;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned char  *ROMAddr = SiS_Pr->VirtualRomBase;
   unsigned short tempah2, tempbl2;
 #endif
@@ -2454,7 +2391,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
      if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300    /* ---- 300 series ---- */
+#ifdef CONFIG_FB_SIS_300    /* ---- 300 series ---- */
 
 	/* For 301BDH: (with LCD via LVDS) */
 	if(SiS_Pr->SiS_VBType & VB_NoLCD) {
@@ -2477,11 +2414,11 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
 	if(SiS_Pr->SiS_VBInfo & SetInSlaveMode)  tempah ^= 0xA0;
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
      } else {
 
-#ifdef SIS315H    /* ------- 315/330 series ------ */
+#ifdef CONFIG_FB_SIS_315    /* ------- 315/330 series ------ */
 
 	if(ModeNo > 0x13) {
 	   tempcl -= ModeVGA;
@@ -2494,7 +2431,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
 	if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) tempah ^= 0x50;
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
      }
 
@@ -2503,7 +2440,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
      if(SiS_Pr->ChipType < SIS_315H) {
 	SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,tempah);
      } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
 	   SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x00,0xa0,tempah);
 	} else if(SiS_Pr->SiS_VBType & VB_SISVB) {
@@ -2584,7 +2521,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
 	if(SiS_Pr->ChipType >= SIS_315H) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	   /* LVDS can only be slave in 8bpp modes */
 	   tempah = 0x80;
 	   if((modeflag & CRT2Mode) && (SiS_Pr->SiS_ModeType > ModeVGA)) {
@@ -2604,7 +2541,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
 	} else {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   tempah = 0;
 	   if( (!(SiS_Pr->SiS_VBInfo & SetInSlaveMode)) && (SiS_Pr->SiS_ModeType > ModeVGA) ) {
 	      tempah |= 0x02;
@@ -2626,7 +2563,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
      if(SiS_Pr->ChipType >= SIS_315H) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	/* unsigned char bridgerev = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x01); */
 
 	/* The following is nearly unpreditable and varies from machine
@@ -2718,11 +2655,11 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 	   SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x23,tempbl,tempah);
 	}
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
      } else if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	SiS_SetRegAND(SiS_Pr->SiS_Part4Port,0x21,0x3f);
 
 	if((SiS_Pr->SiS_VBInfo & DisableCRT2Display) ||
@@ -2745,7 +2682,7 @@ SiS_SetCRT2ModeRegs(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
   } else {  /* LVDS */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
      if(SiS_Pr->ChipType >= SIS_315H) {
 
 	if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) {
@@ -2931,7 +2868,7 @@ SiS_GetCRT2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 	   }
 	}
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	if(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) {
 	   if(SiS_Pr->SiS_LCDResInfo == Panel_1280x1024) {
 	      if(!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) {
@@ -3036,7 +2973,7 @@ SiS_GetCRT2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 	case Panel_1280x1024: tempbx = 24; break;
 	case Panel_1400x1050: tempbx = 26; break;
 	case Panel_1600x1200: tempbx = 28; break;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	case Panel_Barco1366: tempbx = 80; break;
 #endif
 	}
@@ -3053,7 +2990,7 @@ SiS_GetCRT2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
 	if(SiS_Pr->SiS_LCDInfo & LCDPass11) tempbx = 30;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	if(SiS_Pr->SiS_CustomT == CUT_BARCO1024) {
 	   tempbx = 82;
 	   if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) tempbx++;
@@ -3189,7 +3126,7 @@ SiS_GetCRT2DataLVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 
    if((SiS_Pr->SiS_VBType & VB_SISVB) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
       SiS_CalcPanelLinkTiming(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
       SiS_CalcLCDACRT1Timing(SiS_Pr, ModeNo, ModeIdIndex);
 #endif
@@ -3214,7 +3151,7 @@ SiS_GetCRT2DataLVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 	 case 16: LVDSData = SiS_Pr->SiS_LVDS800x600Data_1;    break;
 	 case 18: LVDSData = SiS_Pr->SiS_LVDS1024x600Data_1;   break;
 	 case 20: LVDSData = SiS_Pr->SiS_LVDS1024x768Data_1;   break;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	 case 80: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_1;  break;
 	 case 81: LVDSData = SiS_Pr->SiS_LVDSBARCO1366Data_2;  break;
 	 case 82: LVDSData = SiS_Pr->SiS_LVDSBARCO1024Data_1;  break;
@@ -3248,7 +3185,7 @@ SiS_GetCRT2DataLVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned
 	     (SiS_Pr->SiS_SetFlag & SetDOSMode) ) {
 	    SiS_Pr->SiS_HDE = SiS_Pr->PanelXRes;
             SiS_Pr->SiS_VDE = SiS_Pr->PanelYRes;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	    if(SiS_Pr->SiS_CustomT == CUT_BARCO1366) {
 	       if(ResIndex < 0x08) {
 		  SiS_Pr->SiS_HDE = 1280;
@@ -3270,7 +3207,7 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   unsigned short resinfo, CRT2Index, ResIndex;
   const struct SiS_LCDData *LCDPtr = NULL;
   const struct SiS_TVData  *TVPtr  = NULL;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   short resinfo661;
 #endif
 
@@ -3283,7 +3220,7 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   } else {
      modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
      resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
      resinfo661 = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].ROMMODEIDX661;
      if( (SiS_Pr->SiS_VBInfo & SetCRT2ToLCD)   &&
 	 (SiS_Pr->SiS_SetFlag & LCDVESATiming) &&
@@ -3460,7 +3397,7 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 
 	} else if( (!(SiS_Pr->SiS_LCDInfo & DontExpandLCD)) && (romptr) && (ROMAddr) ) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	   SiS_Pr->SiS_RVBHCMAX  = ROMAddr[romptr];
 	   SiS_Pr->SiS_RVBHCFACT = ROMAddr[romptr+1];
 	   SiS_Pr->SiS_VGAHT     = ROMAddr[romptr+2] | ((ROMAddr[romptr+3] & 0x0f) << 8);
@@ -3520,19 +3457,13 @@ SiS_GetCRT2Data301(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 	      case Panel_1680x1050     :
 	      case Panel_1680x1050 + 32: LCDPtr = SiS_Pr->SiS_LCD1680x1050Data;     break;
 	      case 100		       : LCDPtr = SiS_Pr->SiS_NoScaleData;	    break;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	      case 200                 : LCDPtr = SiS310_ExtCompaq1280x1024Data;    break;
 	      case 201                 : LCDPtr = SiS_Pr->SiS_St2LCD1280x1024Data;  break;
 #endif
 	      default                  : LCDPtr = SiS_Pr->SiS_ExtLCD1024x768Data;   break;
 	   }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-	   xf86DrvMsg(0, X_INFO, "GetCRT2Data: Index %d ResIndex %d\n", CRT2Index, ResIndex);
-#endif
-#endif
-
 	   SiS_Pr->SiS_RVBHCMAX  = (LCDPtr+ResIndex)->RVBHCMAX;
 	   SiS_Pr->SiS_RVBHCFACT = (LCDPtr+ResIndex)->RVBHCFACT;
 	   SiS_Pr->SiS_VGAHT     = (LCDPtr+ResIndex)->VGAHT;
@@ -3624,7 +3555,7 @@ SiS_GetLVDSDesPtr(struct SiS_Private *SiS_Pr)
 {
    const struct SiS_LVDSDes *PanelDesPtr = NULL;
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCD) {
 
       if(SiS_Pr->ChipType < SIS_315H) {
@@ -3696,7 +3627,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 
   if((SiS_Pr->SiS_VBType & VB_SIS30xBLV) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
      if(SiS_Pr->SiS_LCDInfo & DontExpandLCD) {
 	/* non-pass 1:1 only, see above */
 	if(SiS_Pr->SiS_VGAHDE != SiS_Pr->PanelXRes) {
@@ -3771,7 +3702,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
      } else {
 
         if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   switch(SiS_Pr->SiS_LCDResInfo) {
 	   case Panel_800x600:
 	      if(SiS_Pr->SiS_VGAVDE == SiS_Pr->PanelYRes) {
@@ -3816,7 +3747,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 	   }
 #endif
         } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	   switch(SiS_Pr->SiS_LCDResInfo) {
 	   case Panel_1024x768:
 	   case Panel_1280x1024:
@@ -3844,7 +3775,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 	         if(SiS_Pr->ChipType < SIS_315H) {
 	            if(!(modeflag & HalfDCLK)) SiS_Pr->SiS_LCDHDES = 320;
 	         } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 		    if(SiS_Pr->SiS_LCDResInfo == Panel_1024x768)  SiS_Pr->SiS_LCDHDES = 480;
 		    if(SiS_Pr->SiS_LCDResInfo == Panel_1400x1050) SiS_Pr->SiS_LCDHDES = 804;
 		    if(SiS_Pr->SiS_LCDResInfo == Panel_1600x1200) SiS_Pr->SiS_LCDHDES = 704;
@@ -3866,7 +3797,7 @@ SiS_GetLVDSDesData(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 /*           DISABLE VIDEO BRIDGE            */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static int
 SiS_HandlePWD(struct SiS_Private *SiS_Pr)
 {
@@ -3891,11 +3822,6 @@ SiS_HandlePWD(struct SiS_Private *SiS_Pr)
 	 ret = 1;
       }
       SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x27,0x7f,temp);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-      xf86DrvMsg(0, 0, "Setting PWD %x\n", temp);
-#endif
-#endif
    }
 #endif
    return ret;
@@ -3909,7 +3835,7 @@ SiS_HandlePWD(struct SiS_Private *SiS_Pr)
 void
 SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short tempah, pushax=0, modenum;
 #endif
   unsigned short temp=0;
@@ -3920,7 +3846,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 
 	if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300	   /* 300 series */
+#ifdef CONFIG_FB_SIS_300	   /* 300 series */
 
 	   if(!(SiS_CR36BIOSWord23b(SiS_Pr))) {
 	      if(SiS_Pr->SiS_VBType & VB_SISLVDS) {
@@ -3953,11 +3879,11 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 	      }
 	   }
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
         } else {
 
-#ifdef SIS315H	   /* 315 series */
+#ifdef CONFIG_FB_SIS_315	   /* 315 series */
 
 	   int didpwd = 0;
 	   bool custom1 = (SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) ||
@@ -4081,14 +4007,14 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 
 	   }
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
 	}
 
      } else {     /* ============ For 301 ================ */
 
         if(SiS_Pr->ChipType < SIS_315H) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	   if(!(SiS_CR36BIOSWord23b(SiS_Pr))) {
 	      SiS_SetRegSR11ANDOR(SiS_Pr,0xF7,0x08);
 	      SiS_PanelDelay(SiS_Pr, 3);
@@ -4111,7 +4037,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 	    SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x1E,0x20);
 	    SiS_SetReg(SiS_Pr->SiS_Part1Port,0x00,temp);
 	} else {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	    SiS_SetRegAND(SiS_Pr->SiS_P3c4,0x1E,0xDF);            /* disable CRT2 */
 	    if( (!(SiS_CRT2IsLCD(SiS_Pr))) ||
 		(!(SiS_CR36BIOSWord23d(SiS_Pr))) ) {
@@ -4127,7 +4053,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 
     if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300	/* 300 series */
+#ifdef CONFIG_FB_SIS_300	/* 300 series */
 
 	if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) {
 	   SiS_SetCH700x(SiS_Pr,0x0E,0x09);
@@ -4171,11 +4097,11 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 	   SiS_SetRegSR11ANDOR(SiS_Pr,0xFB,0x04);
 	}
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
     } else {
 
-#ifdef SIS315H	/* 315 series */
+#ifdef CONFIG_FB_SIS_315	/* 315 series */
 
 	if(!(SiS_IsNotM650orLater(SiS_Pr))) {
 	   /*if(SiS_Pr->ChipType < SIS_340) { */ /* XGI needs this */
@@ -4288,7 +4214,7 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
 	   }
         }
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
     }  /* 315 series */
 
@@ -4304,14 +4230,12 @@ SiS_DisableBridge(struct SiS_Private *SiS_Pr)
  * from outside the context of a mode switch!
  * MUST call getVBType before calling this
  */
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 {
   unsigned short temp=0, tempah;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short temp1, pushax=0;
   bool delaylong = false;
 #endif
@@ -4322,7 +4246,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 
       if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300     /* 300 series */
+#ifdef CONFIG_FB_SIS_300     /* 300 series */
 
 	 if(SiS_CRT2IsLCD(SiS_Pr)) {
 	    if(SiS_Pr->SiS_VBType & VB_SISLVDS) {
@@ -4385,11 +4309,11 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 	 }
 
 
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
       } else {
 
-#ifdef SIS315H    /* 315 series */
+#ifdef CONFIG_FB_SIS_315    /* 315 series */
 
 #ifdef SET_EMI
 	 unsigned char   r30=0, r31=0, r32=0, r33=0, cr36=0;
@@ -4688,7 +4612,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 	    SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x00,0x7f);
 	 }
 
-#endif /* SIS315H */
+#endif /* CONFIG_FB_SIS_315 */
 
       }
 
@@ -4739,7 +4663,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 
     if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300    /* 300 series */
+#ifdef CONFIG_FB_SIS_300    /* 300 series */
 
        if(SiS_CRT2IsLCD(SiS_Pr)) {
 	  if(SiS_Pr->ChipType == SIS_730) {
@@ -4783,11 +4707,11 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 	  }
        }
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
     } else {
 
-#ifdef SIS315H    /* 315 series */
+#ifdef CONFIG_FB_SIS_315    /* 315 series */
 
        if(!(SiS_IsNotM650orLater(SiS_Pr))) {
 	  /*if(SiS_Pr->ChipType < SIS_340) {*/  /* XGI needs this */
@@ -4881,7 +4805,7 @@ SiS_EnableBridge(struct SiS_Private *SiS_Pr)
 	  }
        }
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
     } /* 310 series */
 
@@ -4971,7 +4895,7 @@ SiS_SetCRT2Sync(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 
       if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300  /* ---- 300 series --- */
+#ifdef CONFIG_FB_SIS_300  /* ---- 300 series --- */
 
 	 if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {			/* 630 - 301B(-DH) */
 
@@ -5000,11 +4924,11 @@ SiS_SetCRT2Sync(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 
 	 }
 
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
       } else {
 
-#ifdef SIS315H  /* ------- 315 series ------ */
+#ifdef CONFIG_FB_SIS_315  /* ------- 315 series ------ */
 
 	 if(SiS_Pr->SiS_VBType & VB_SISLVDS) {	  		/* 315 - LVDS */
 
@@ -5076,13 +5000,13 @@ SiS_SetCRT2Sync(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 	    }
 
          }
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
       }
    }
 }
 
 /* Set CRT2 FIFO on 300/540/630/730 */
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void
 SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo)
 {
@@ -5154,13 +5078,8 @@ SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo)
 
      } else {
 
-#ifdef SIS_LINUX_KERNEL
 	pci50 = sisfb_read_nbridge_pci_dword(SiS_Pr, 0x50);
 	pciA0 = sisfb_read_nbridge_pci_dword(SiS_Pr, 0xa0);
-#else
-	pci50 = pciReadLong(0x00000000, 0x50);
-	pciA0 = pciReadLong(0x00000000, 0xA0);
-#endif
 
         if(SiS_Pr->ChipType == SIS_730) {
 
@@ -5262,7 +5181,7 @@ SiS_SetCRT2FIFO_300(struct SiS_Private *SiS_Pr,unsigned short ModeNo)
 #endif
 
 /* Set CRT2 FIFO on 315/330 series */
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void
 SiS_SetCRT2FIFO_310(struct SiS_Private *SiS_Pr)
 {
@@ -5420,27 +5339,6 @@ SiS_SetGroup1_301(struct SiS_Private *SiS_Pr, unsigned short ModeNo,unsigned sho
 
   temp = SiS_GetRegByte((SiS_Pr->SiS_P3ca+0x02));
   SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,temp);			/* ? */
-
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-   xf86DrvMsg(0, X_INFO, "%d %d %d %d  %d %d %d %d  (%d %d %d %d)\n",
-	SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal,
-	SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal,
-	SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd);
-
-   xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1],
-	SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3],
-	SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5],
-	SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
-	SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9],
-	SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11],
-	SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13],
-	SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]);
-   xf86DrvMsg(0, X_INFO, "   0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]);
-#endif
-#endif
 }
 
 /* Setup panel link
@@ -5455,17 +5353,17 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   unsigned short push2, tempax, tempbx, tempcx, temp;
   unsigned int   tempeax = 0, tempebx, tempecx, tempvcfact = 0;
   bool islvds = false, issis  = false, chkdclkfirst = false;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   unsigned short crt2crtc = 0;
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short pushcx;
 #endif
 
   if(ModeNo <= 0x13) {
      modeflag = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ModeFlag;
      resinfo = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_ResInfo;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
      crt2crtc = SiS_Pr->SiS_SModeIDTable[ModeIdIndex].St_CRT2CRTC;
 #endif
   } else if(SiS_Pr->UseCustomMode) {
@@ -5473,7 +5371,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   } else {
      modeflag = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_ModeFlag;
      resinfo = SiS_Pr->SiS_EModeIDTable[ModeIdIndex].Ext_RESINFO;
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
      crt2crtc = SiS_Pr->SiS_RefIndex[RefreshRateTableIndex].Ext_CRT2CRTC;
 #endif
   }
@@ -5494,7 +5392,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
      }
   }
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if((SiS_Pr->ChipType >= SIS_315H) && (SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA)) {
      if(IS_SIS330) {
         SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2D,0x10);
@@ -5744,7 +5642,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
 
   if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300      /* 300 series */
+#ifdef CONFIG_FB_SIS_300      /* 300 series */
      tempeax = SiS_Pr->SiS_VGAVDE << 6;
      temp = (tempeax % (unsigned int)SiS_Pr->SiS_VDE);
      tempeax = tempeax / (unsigned int)SiS_Pr->SiS_VDE;
@@ -5755,11 +5653,11 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
      temp = (unsigned short)(tempeax & 0x00FF);
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1E,temp);      	/* BPLVCFACT */
      tempvcfact = temp;
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
   } else {
 
-#ifdef SIS315H  /* 315 series */
+#ifdef CONFIG_FB_SIS_315  /* 315 series */
      tempeax = SiS_Pr->SiS_VGAVDE << 18;
      tempebx = SiS_Pr->SiS_VDE;
      temp = (tempeax % tempebx);
@@ -5845,7 +5743,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   temp = (unsigned short)(tempecx & 0x00FF);
   SiS_SetReg(SiS_Pr->SiS_Part1Port,0x23,temp);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->ChipType >= SIS_315H) {
      if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
         if((islvds) || (SiS_Pr->SiS_VBInfo & VB_SISLVDS)) {
@@ -5863,7 +5761,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   }
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
   if(SiS_Pr->SiS_IF_DEF_TRUMPION) {
      unsigned char *ROMAddr = SiS_Pr->VirtualRomBase;
      unsigned char *trumpdata;
@@ -5899,7 +5797,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
   }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_Pr->SiS_IF_DEF_FSTN || SiS_Pr->SiS_IF_DEF_DSTN) {
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x25,0x00);
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x26,0x00);
@@ -5954,7 +5852,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
      temp = tempax & 0x00FF;
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x43,temp);
      temp = ((tempax & 0xFF00) >> 8) << 3;
-     SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x44,~0x0F8,temp);
+     SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port, 0x44, 0x07, temp);
 
      tempax = SiS_Pr->SiS_VDE;				 	/* BDxWadrst1 = BDxWadrst0 + BDxWadroff * VDE */
      if(SiS_Pr->SiS_LCDResInfo == Panel_320x240_1 ||
@@ -5968,7 +5866,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
      temp = ((tempeax & 0xFF0000) >> 16) | 0x10;
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x40,temp);
      temp = ((tempeax & 0x01000000) >> 24) << 7;
-     SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x3C,~0x080,temp);
+     SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port, 0x3C, 0x7F, temp);
 
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x2F,0x03);
      SiS_SetReg(SiS_Pr->SiS_Part1Port,0x03,0x50);
@@ -5999,7 +5897,7 @@ SiS_SetGroup1_LVDS(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned s
         SiS_SetReg(SiS_Pr->SiS_Part1Port,0x45,0x0a);
      }
   }
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 }
 
 /* Set Part 1 */
@@ -6007,12 +5905,12 @@ static void
 SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex,
 		unsigned short RefreshRateTableIndex)
 {
-#if defined(SIS300) || defined(SIS315H)
+#if defined(CONFIG_FB_SIS_300) || defined(CONFIG_FB_SIS_315)
   unsigned char   *ROMAddr = SiS_Pr->VirtualRomBase;
 #endif
   unsigned short  temp=0, tempax=0, tempbx=0, tempcx=0, bridgeadd=0;
   unsigned short  pushbx=0, CRT1Index=0, modeflag, resinfo=0;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short  tempbl=0;
 #endif
 
@@ -6038,11 +5936,11 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
          (SiS_Pr->SiS_VBInfo & SetInSlaveMode)) ) {
 
      if(SiS_Pr->ChipType < SIS_315H ) {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 	SiS_SetCRT2FIFO_300(SiS_Pr, ModeNo);
 #endif
      } else {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	SiS_SetCRT2FIFO_310(SiS_Pr);
 #endif
      }
@@ -6051,7 +5949,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
      if(SiS_Pr->ChipType < SIS_315H ) {
 
-#ifdef SIS300   /* ------------- 300 series --------------*/
+#ifdef CONFIG_FB_SIS_300   /* ------------- 300 series --------------*/
 
 	temp = (SiS_Pr->SiS_VGAHT - 1) & 0x0FF;   		  /* BTVGA2HT 0x08,0x09 */
 	SiS_SetReg(SiS_Pr->SiS_Part1Port,0x08,temp);              /* CRT2 Horizontal Total */
@@ -6070,11 +5968,11 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
 	bridgeadd = 12;
 
-#endif /* SIS300 */
+#endif /* CONFIG_FB_SIS_300 */
 
      } else {
 
-#ifdef SIS315H  /* ------------------- 315/330 series --------------- */
+#ifdef CONFIG_FB_SIS_315  /* ------------------- 315/330 series --------------- */
 
 	tempcx = SiS_Pr->SiS_VGAHT;				  /* BTVGA2HT 0x08,0x09 */
 	if(modeflag & HalfDCLK) {
@@ -6125,7 +6023,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 	   }
         }
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
      }  /* 315/330 series */
 
@@ -6256,7 +6154,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
      if(SiS_Pr->ChipType < SIS_315H) {
 
-#ifdef SIS300  /* ---------- 300 series -------------- */
+#ifdef CONFIG_FB_SIS_300  /* ---------- 300 series -------------- */
 
 	if(SiS_Pr->SiS_VBType & VB_SISVB) {
 	   temp = 0x20;
@@ -6310,11 +6208,11 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
 	SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x13,~0x3C,temp);   /* Panel Link Delay Compensation; (Software Command Reset; Power Saving) */
 
-#endif  /* SIS300 */
+#endif  /* CONFIG_FB_SIS_300 */
 
      } else {
 
-#ifdef SIS315H   /* --------------- 315/330 series ---------------*/
+#ifdef CONFIG_FB_SIS_315   /* --------------- 315/330 series ---------------*/
 
 	if(SiS_Pr->ChipType < SIS_661) {
 
@@ -6349,7 +6247,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 	if(modeflag & HalfDCLK)       tempax |= 0x40;
 	SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x2C,0x3f,tempax);
 
-#endif  /* SIS315H */
+#endif  /* CONFIG_FB_SIS_315 */
 
      }
 
@@ -6381,7 +6279,7 @@ SiS_SetGroup1(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 /*         SET PART 2 REGISTER GROUP         */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static unsigned char *
 SiS_GetGroup2CLVXPtr(struct SiS_Private *SiS_Pr, int tabletype)
 {
@@ -6478,7 +6376,7 @@ SiS_GetCRT2Part2Ptr(struct SiS_Private *SiS_Pr,unsigned short ModeNo,unsigned sh
 }
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void
 SiS_Group2LCDSpecial(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short crt2crtc)
 {
@@ -6690,7 +6588,7 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
   unsigned int   longtemp, PhaseIndex;
   bool           newtvphase;
   const unsigned char *TimingPoint;
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   unsigned short resindex, CRT2Index;
   const struct SiS_Part2PortTbl *CRT2Part2Ptr = NULL;
 
@@ -7069,7 +6967,7 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
   SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x17,0xFB);
   SiS_SetRegAND(SiS_Pr->SiS_Part2Port,0x18,0xDF);
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   if(SiS_GetCRT2Part2Ptr(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex,
                           			&CRT2Index, &resindex)) {
       switch(CRT2Index) {
@@ -7130,12 +7028,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
     /* Non-expanding: lcdvdes = tempcx = VT-1; lcdvdee = tempbx = VDE-1 */
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdvdes 0x%x lcdvdee 0x%x\n", tempcx, tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x05,tempcx);	/* lcdvdes  */
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x06,tempbx);	/* lcdvdee  */
 
@@ -7184,12 +7076,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
        tempbx = SiS_Pr->CVSyncStart;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdvrs 0x%x\n", tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,tempbx);	    /* lcdvrs */
 
     temp = (tempbx >> 4) & 0xF0;
@@ -7201,15 +7087,9 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
        temp |= (SiS_Pr->CVSyncEnd & 0x0f);
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdvre[3:0] 0x%x\n", (temp & 0x0f));
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,temp);
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
     SiS_Group2LCDSpecial(SiS_Pr, ModeNo, crt2crtc);
 #endif
 
@@ -7245,12 +7125,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
        tempax >>= 1;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdhdee 0x%x\n", tempbx);
-#endif
-#endif
-
     tempbx += bridgeoffset;
 
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x23,tempbx);	    /* lcdhdee */
@@ -7276,12 +7150,6 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
        tempbx += bridgeoffset;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdhrs 0x%x\n", tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x1C,tempbx);	    /* lcdhrs */
     SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1D,0x0F,((tempbx >> 4) & 0xf0));
 
@@ -7300,20 +7168,14 @@ SiS_SetGroup2(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
        tempbx += bridgeoffset;
     }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "lcdhre 0x%x\n", tempbx);
-#endif
-#endif
-
     SiS_SetReg(SiS_Pr->SiS_Part2Port,0x21,tempbx);	    /* lcdhre */
 
     SiS_SetGroup2_Tail(SiS_Pr, ModeNo);
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
     SiS_Set300Part2Regs(SiS_Pr, ModeIdIndex, RefreshRateTableIndex, ModeNo);
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
   } /* CRT2-LCD from table */
 #endif
 }
@@ -7382,7 +7244,7 @@ SiS_SetGroup3(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 /*         SET PART 4 REGISTER GROUP         */
 /*********************************************/
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 #if 0
 static void
 SiS_ShiftXPos(struct SiS_Private *SiS_Pr, int shift)
@@ -8011,7 +7873,7 @@ SiS_SetCHTVReg(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
    if(SiS_Pr->SiS_IF_DEF_CH70xx == 1) {
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 
       /* Chrontel 7005 - I assume that it does not come with a 315 series chip */
 
@@ -8124,7 +7986,7 @@ SiS_SetCHTVReg(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
       /* Chrontel 7019 - assumed that it does not come with a 300 series chip */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 
       unsigned short temp;
 
@@ -8175,7 +8037,7 @@ SiS_SetCHTVReg(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short
 
 }
 
-#ifdef SIS315H  /* ----------- 315 series only ---------- */
+#ifdef CONFIG_FB_SIS_315  /* ----------- 315 series only ---------- */
 
 void
 SiS_Chrontel701xBLOn(struct SiS_Private *SiS_Pr)
@@ -8657,7 +8519,7 @@ SiS_ChrontelDoSomething1(struct SiS_Private *SiS_Pr)
 bool
 SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 {
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    unsigned char  *ROMAddr  = SiS_Pr->VirtualRomBase;
 #endif
    unsigned short ModeIdIndex, RefreshRateTableIndex;
@@ -8703,16 +8565,6 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
       SiS_GetLVDSDesData(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
    }
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-  xf86DrvMsg(0, X_INFO, "(init301: LCDHDES 0x%03x LCDVDES 0x%03x)\n", SiS_Pr->SiS_LCDHDES, SiS_Pr->SiS_LCDVDES);
-  xf86DrvMsg(0, X_INFO, "(init301: HDE     0x%03x VDE     0x%03x)\n", SiS_Pr->SiS_HDE, SiS_Pr->SiS_VDE);
-  xf86DrvMsg(0, X_INFO, "(init301: VGAHDE  0x%03x VGAVDE  0x%03x)\n", SiS_Pr->SiS_VGAHDE, SiS_Pr->SiS_VGAVDE);
-  xf86DrvMsg(0, X_INFO, "(init301: HT      0x%03x VT      0x%03x)\n", SiS_Pr->SiS_HT, SiS_Pr->SiS_VT);
-  xf86DrvMsg(0, X_INFO, "(init301: VGAHT   0x%03x VGAVT   0x%03x)\n", SiS_Pr->SiS_VGAHT, SiS_Pr->SiS_VGAVT);
-#endif
-#endif
-
    if(SiS_Pr->SiS_SetFlag & LowModeTests) {
       SiS_SetGroup1(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
    }
@@ -8722,12 +8574,12 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
       if(SiS_Pr->SiS_SetFlag & LowModeTests) {
 
 	 SiS_SetGroup2(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	 SiS_SetGroup2_C_ELV(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
 #endif
 	 SiS_SetGroup3(SiS_Pr, ModeNo, ModeIdIndex);
 	 SiS_SetGroup4(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 	 SiS_SetGroup4_C_ELV(SiS_Pr, ModeNo, ModeIdIndex);
 #endif
 	 SiS_SetGroup5(SiS_Pr, ModeNo, ModeIdIndex);
@@ -8758,7 +8610,7 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 	 if(SiS_Pr->SiS_IF_DEF_CH70xx != 0) {
 	    if(SiS_Pr->SiS_VBInfo & (SetCRT2ToLCD | SetCRT2ToLCDA)) {
 	       if(SiS_Pr->SiS_IF_DEF_CH70xx == 2) {
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 		  SiS_SetCH701xForLCD(SiS_Pr);
 #endif
 	       }
@@ -8771,7 +8623,7 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
 
    }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
    if(SiS_Pr->ChipType < SIS_315H) {
       if(SiS_Pr->SiS_SetFlag & LowModeTests) {
 	 if(SiS_Pr->SiS_UseOEM) {
@@ -8794,7 +8646,7 @@ SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
    }
 #endif
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
    if(SiS_Pr->ChipType >= SIS_315H) {
       if(SiS_Pr->SiS_SetFlag & LowModeTests) {
 	 if(SiS_Pr->ChipType < SIS_661) {
@@ -8873,7 +8725,7 @@ SiS_SetupDDCN(struct SiS_Private *SiS_Pr)
   }
 }
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static unsigned char *
 SiS_SetTrumpBlockLoop(struct SiS_Private *SiS_Pr, unsigned char *dataptr)
 {
@@ -8923,11 +8775,6 @@ SiS_SetTrumpionBlock(struct SiS_Private *SiS_Pr, unsigned char *dataptr)
      dataptr = SiS_SetTrumpBlockLoop(SiS_Pr, dataptr);
      if(!dataptr) return false;
   }
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-  xf86DrvMsg(0, X_INFO, "Trumpion block success\n");
-#endif
-#endif
   return true;
 }
 #endif
@@ -9002,9 +8849,7 @@ SiS_SetCH701x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val)
   SiS_SetChReg(SiS_Pr, reg, val, 0);
 }
 
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 void
 SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val)
 {
@@ -9091,9 +8936,7 @@ SiS_GetCH701x(struct SiS_Private *SiS_Pr, unsigned short tempbx)
 
 /* Read from Chrontel 70xx */
 /* Parameter is [Register no (S7-S0)] */
-#ifdef SIS_LINUX_KERNEL
 static
-#endif
 unsigned short
 SiS_GetCH70xx(struct SiS_Private *SiS_Pr, unsigned short tempbx)
 {
@@ -9114,9 +8957,7 @@ SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg,
 }
 
 /* Our own DDC functions */
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, int VGAEngine,
                 unsigned short adaptnum, unsigned short DDCdatatype, bool checkcr32,
@@ -9224,12 +9065,6 @@ SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, int VGAEngine,
 
     SiS_SetupDDCN(SiS_Pr);
 
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-    xf86DrvMsg(0, X_INFO, "DDC Port %x Index %x Shift %d\n",
-    		SiS_Pr->SiS_DDC_Port, SiS_Pr->SiS_DDC_Index, temp);
-#endif
-#endif
     return 0;
 }
 
@@ -9292,11 +9127,6 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr)
     SiS_SetSwitchDDC2(SiS_Pr);
     if(SiS_PrepareDDC(SiS_Pr)) {
          SiS_SetStop(SiS_Pr);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-         xf86DrvMsg(0, X_INFO, "Probe: Prepare failed\n");
-#endif
-#endif
          return 0xFFFF;
     }
     mask = 0xf0;
@@ -9310,11 +9140,6 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr)
        } else {
            failed = true;
 	   ret = 0xFFFF;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-           xf86DrvMsg(0, X_INFO, "Probe: Read 1 failed\n");
-#endif
-#endif
        }
     }
     if(!failed) {
@@ -9324,11 +9149,6 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr)
        if(temp == value) ret = 0;
        else {
           ret = 0xFFFF;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-          xf86DrvMsg(0, X_INFO, "Probe: Read 2 failed\n");
-#endif
-#endif
           if(SiS_Pr->SiS_DDC_DeviceAddr == 0xa0) {
              if(temp == 0x30) ret = 0;
           }
@@ -9338,9 +9158,7 @@ SiS_DoProbeDDC(struct SiS_Private *SiS_Pr)
     return ret;
 }
 
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_ProbeDDC(struct SiS_Private *SiS_Pr)
 {
@@ -9357,9 +9175,7 @@ SiS_ProbeDDC(struct SiS_Private *SiS_Pr)
    return flag;
 }
 
-#ifndef SIS_XORG_XF86
 static
-#endif
 unsigned short
 SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype, unsigned char *buffer)
 {
@@ -9606,11 +9422,6 @@ SiS_SetSCLKHigh(struct SiS_Private *SiS_Pr)
     temp = SiS_GetReg(SiS_Pr->SiS_DDC_Port,SiS_Pr->SiS_DDC_Index);
   } while((!(temp & SiS_Pr->SiS_DDC_Clk)) && --watchdog);
   if (!watchdog) {
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
-        xf86DrvMsg(0, X_INFO, "SetClkHigh failed\n");
-#endif
-#endif
   	return 0xFFFF;
   }
   SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT);
@@ -9641,7 +9452,7 @@ SiS_CheckACK(struct SiS_Private *SiS_Pr)
 
 /* =============== SiS 315/330 O.E.M. ================= */
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 
 static unsigned short
 GetRAMDACromptr(struct SiS_Private *SiS_Pr)
@@ -10829,7 +10640,7 @@ SiS_FinalizeLCD(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned shor
 
 /*  =================  SiS 300 O.E.M. ================== */
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 
 static void
 SetOEMLCDData2(struct SiS_Private *SiS_Pr, unsigned short ModeNo,unsigned short ModeIdIndex,
diff --git a/drivers/video/sis/init301.h b/drivers/video/sis/init301.h
index 51d99222375..2112d6d7fed 100644
--- a/drivers/video/sis/init301.h
+++ b/drivers/video/sis/init301.h
@@ -53,15 +53,8 @@
 #ifndef  _INIT301_H_
 #define  _INIT301_H_
 
-#include "osdef.h"
 #include "initdef.h"
 
-#ifdef SIS_XORG_XF86
-#include "sis.h"
-#include "sis_regs.h"
-#endif
-
-#ifdef SIS_LINUX_KERNEL
 #include "vgatypes.h"
 #include "vstruct.h"
 #ifdef SIS_CP
@@ -72,7 +65,6 @@
 #include <linux/fb.h>
 #include "sis.h"
 #include <video/sisfb.h>
-#endif
 
 static const unsigned char SiS_YPbPrTable[3][64] = {
   {
@@ -237,7 +229,7 @@ static const unsigned char SiS_Part2CLVX_6[] = {   /* 1080i */
     0xFF,0xFF,
 };
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 /* 661 et al LCD data structure (2.03.00) */
 static const unsigned char SiS_LCDStruct661[] = {
     /* 1024x768 */
@@ -279,7 +271,7 @@ static const unsigned char SiS_LCDStruct661[] = {
 };
 #endif
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static unsigned char SiS300_TrumpionData[14][80] = {
   { 0x02,0x0A,0x0A,0x01,0x04,0x01,0x00,0x03,0x0D,0x00,0x0D,0x10,0x7F,0x00,0x80,0x02,
     0x20,0x03,0x0B,0x00,0x90,0x01,0xC1,0x01,0x60,0x0C,0x30,0x10,0x00,0x00,0x04,0x23,
@@ -356,9 +348,6 @@ static unsigned char SiS300_TrumpionData[14][80] = {
 #endif
 
 void		SiS_UnLockCRT2(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_LockCRT2(struct SiS_Private *SiS_Pr);
-#endif
 void		SiS_EnableCRT2(struct SiS_Private *SiS_Pr);
 unsigned short	SiS_GetRatePtr(struct SiS_Private *SiS_Pr, unsigned short ModeNo, unsigned short ModeIdIndex);
 void		SiS_WaitRetrace1(struct SiS_Private *SiS_Pr);
@@ -375,9 +364,6 @@ unsigned short	SiS_GetVCLK2Ptr(struct SiS_Private *SiS_Pr, unsigned short ModeNo
 			unsigned short RefreshRateTableIndex);
 unsigned short	SiS_GetResInfo(struct SiS_Private *SiS_Pr,unsigned short ModeNo,unsigned short ModeIdIndex);
 void		SiS_DisableBridge(struct SiS_Private *SiS_Pr);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_EnableBridge(struct SiS_Private *SiS_Pr);
-#endif
 bool		SiS_SetCRT2Group(struct SiS_Private *SiS_Pr, unsigned short ModeNo);
 void		SiS_SiS30xBLOn(struct SiS_Private *SiS_Pr);
 void		SiS_SiS30xBLOff(struct SiS_Private *SiS_Pr);
@@ -386,13 +372,9 @@ void		SiS_SetCH700x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned cha
 unsigned short	SiS_GetCH700x(struct SiS_Private *SiS_Pr, unsigned short tempax);
 void		SiS_SetCH701x(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
 unsigned short	SiS_GetCH701x(struct SiS_Private *SiS_Pr, unsigned short tempax);
-#ifndef SIS_LINUX_KERNEL
-void		SiS_SetCH70xx(struct SiS_Private *SiS_Pr, unsigned short reg, unsigned char val);
-unsigned short	SiS_GetCH70xx(struct SiS_Private *SiS_Pr, unsigned short tempax);
-#endif
 void		SiS_SetCH70xxANDOR(struct SiS_Private *SiS_Pr, unsigned short reg,
 			unsigned char orval,unsigned short andval);
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void	SiS_Chrontel701xOn(struct SiS_Private *SiS_Pr);
 static void	SiS_Chrontel701xOff(struct SiS_Private *SiS_Pr);
 static void	SiS_ChrontelInitTVVSync(struct SiS_Private *SiS_Pr);
@@ -401,7 +383,7 @@ void		SiS_Chrontel701xBLOn(struct SiS_Private *SiS_Pr);
 void		SiS_Chrontel701xBLOff(struct SiS_Private *SiS_Pr);
 #endif /* 315 */
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static  bool	SiS_SetTrumpionBlock(struct SiS_Private *SiS_Pr, unsigned char *dataptr);
 void		SiS_SetChrontelGPIO(struct SiS_Private *SiS_Pr, unsigned short myvbinfo);
 #endif
@@ -412,21 +394,12 @@ unsigned short	SiS_HandleDDC(struct SiS_Private *SiS_Pr, unsigned int VBFlags, i
 			unsigned short adaptnum, unsigned short DDCdatatype,
 			unsigned char *buffer, unsigned int VBFlags2);
 
-#ifdef SIS_XORG_XF86
-unsigned short		SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags,
-				int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype,
-				bool checkcr32, unsigned int VBFlags2);
-unsigned short		SiS_ProbeDDC(struct SiS_Private *SiS_Pr);
-unsigned short		SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype,
-				unsigned char *buffer);
-#else
 static unsigned short	SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags,
 				int VGAEngine, unsigned short adaptnum, unsigned short DDCdatatype,
 				bool checkcr32, unsigned int VBFlags2);
 static unsigned short	SiS_ProbeDDC(struct SiS_Private *SiS_Pr);
 static unsigned short	SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype,
 				unsigned char *buffer);
-#endif
 static void		SiS_SetSwitchDDC2(struct SiS_Private *SiS_Pr);
 static unsigned short	SiS_SetStart(struct SiS_Private *SiS_Pr);
 static unsigned short	SiS_SetStop(struct SiS_Private *SiS_Pr);
@@ -441,13 +414,13 @@ static unsigned short	SiS_PrepareDDC(struct SiS_Private *SiS_Pr);
 static void		SiS_SendACK(struct SiS_Private *SiS_Pr, unsigned short yesno);
 static unsigned short	SiS_DoProbeDDC(struct SiS_Private *SiS_Pr);
 
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 static void		SiS_OEM300Setting(struct SiS_Private *SiS_Pr,
 				unsigned short ModeNo, unsigned short ModeIdIndex, unsigned short RefTabindex);
 static void		SetOEMLCDData2(struct SiS_Private *SiS_Pr,
 				unsigned short ModeNo, unsigned short ModeIdIndex,unsigned short RefTableIndex);
 #endif
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
 static void		SiS_OEM310Setting(struct SiS_Private *SiS_Pr,
 				unsigned short ModeNo,unsigned short ModeIdIndex, unsigned short RRTI);
 static void		SiS_OEM661Setting(struct SiS_Private *SiS_Pr,
@@ -455,17 +428,6 @@ static void		SiS_OEM661Setting(struct SiS_Private *SiS_Pr,
 static void		SiS_FinalizeLCD(struct SiS_Private *, unsigned short, unsigned short);
 #endif
 
-extern void		SiS_SetReg(SISIOADDRESS, unsigned short, unsigned short);
-extern void		SiS_SetRegByte(SISIOADDRESS, unsigned short);
-extern void		SiS_SetRegShort(SISIOADDRESS, unsigned short);
-extern void		SiS_SetRegLong(SISIOADDRESS, unsigned int);
-extern unsigned char	SiS_GetReg(SISIOADDRESS, unsigned short);
-extern unsigned char	SiS_GetRegByte(SISIOADDRESS);
-extern unsigned short	SiS_GetRegShort(SISIOADDRESS);
-extern unsigned int	SiS_GetRegLong(SISIOADDRESS);
-extern void		SiS_SetRegANDOR(SISIOADDRESS, unsigned short, unsigned short, unsigned short);
-extern void		SiS_SetRegOR(SISIOADDRESS, unsigned short, unsigned short);
-extern void		SiS_SetRegAND(SISIOADDRESS, unsigned short, unsigned short);
 extern void		SiS_DisplayOff(struct SiS_Private *SiS_Pr);
 extern void		SiS_DisplayOn(struct SiS_Private *SiS_Pr);
 extern bool		SiS_SearchModeID(struct SiS_Private *, unsigned short *, unsigned short *);
@@ -482,15 +444,13 @@ extern void		SiS_CalcLCDACRT1Timing(struct SiS_Private *SiS_Pr, unsigned short M
 extern void		SiS_CalcCRRegisters(struct SiS_Private *SiS_Pr, int depth);
 extern unsigned short	SiS_GetRefCRTVCLK(struct SiS_Private *SiS_Pr, unsigned short Index, int UseWide);
 extern unsigned short	SiS_GetRefCRT1CRTC(struct SiS_Private *SiS_Pr, unsigned short Index, int UseWide);
-#ifdef SIS300
+#ifdef CONFIG_FB_SIS_300
 extern void		SiS_GetFIFOThresholdIndex300(struct SiS_Private *SiS_Pr, unsigned short *tempbx,
 				unsigned short *tempcl);
 extern unsigned short	SiS_GetFIFOThresholdB300(unsigned short tempbx, unsigned short tempcl);
 extern unsigned short	SiS_GetLatencyFactor630(struct SiS_Private *SiS_Pr, unsigned short index);
-#ifdef SIS_LINUX_KERNEL
 extern unsigned int	sisfb_read_nbridge_pci_dword(struct SiS_Private *SiS_Pr, int reg);
 extern unsigned int	sisfb_read_lpc_pci_dword(struct SiS_Private *SiS_Pr, int reg);
 #endif
-#endif
 
 #endif
diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/sis/initextlfb.c
index 99c04a4855d..9dec64da401 100644
--- a/drivers/video/sis/initextlfb.c
+++ b/drivers/video/sis/initextlfb.c
@@ -25,7 +25,6 @@
  * Author:	Thomas Winischhofer <thomas@winischhofer.net>
  */
 
-#include "osdef.h"
 #include "initdef.h"
 #include "vgatypes.h"
 #include "vstruct.h"
@@ -59,7 +58,7 @@ sisfb_mode_rate_to_dclock(struct SiS_Private *SiS_Pr, unsigned char modeno,
 
     if(rateindex > 0) rateindex--;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
     switch(ModeNo) {
     case 0x5a: ModeNo = 0x50; break;
     case 0x5b: ModeNo = 0x56;
@@ -103,7 +102,7 @@ sisfb_mode_rate_to_ddata(struct SiS_Private *SiS_Pr, unsigned char modeno,
 
     if(rateindex > 0) rateindex--;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
     switch(ModeNo) {
        case 0x5a: ModeNo = 0x50; break;
        case 0x5b: ModeNo = 0x56;
@@ -187,7 +186,7 @@ sisfb_gettotalfrommode(struct SiS_Private *SiS_Pr, unsigned char modeno, int *ht
 
     if(rateindex > 0) rateindex--;
 
-#ifdef SIS315H
+#ifdef CONFIG_FB_SIS_315
     switch(ModeNo) {
        case 0x5a: ModeNo = 0x50; break;
        case 0x5b: ModeNo = 0x56;
diff --git a/drivers/video/sis/osdef.h b/drivers/video/sis/osdef.h
deleted file mode 100644
index 6ff8f988a1a..00000000000
--- a/drivers/video/sis/osdef.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* $XFree86$ */
-/* $XdotOrg$ */
-/*
- * OS depending defines
- *
- * Copyright (C) 2001-2005 by Thomas Winischhofer, Vienna, Austria
- *
- * If distributed as part of the Linux kernel, the following license terms
- * apply:
- *
- * * This program is free software; you can redistribute it and/or modify
- * * it under the terms of the GNU General Public License as published by
- * * the Free Software Foundation; either version 2 of the named License,
- * * or any later version.
- * *
- * * This program is distributed in the hope that it will be useful,
- * * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * * GNU General Public License for more details.
- * *
- * * You should have received a copy of the GNU General Public License
- * * along with this program; if not, write to the Free Software
- * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
- *
- * Otherwise, the following license terms apply:
- *
- * * Redistribution and use in source and binary forms, with or without
- * * modification, are permitted provided that the following conditions
- * * are met:
- * * 1) Redistributions of source code must retain the above copyright
- * *    notice, this list of conditions and the following disclaimer.
- * * 2) Redistributions in binary form must reproduce the above copyright
- * *    notice, this list of conditions and the following disclaimer in the
- * *    documentation and/or other materials provided with the distribution.
- * * 3) The name of the author may not be used to endorse or promote products
- * *    derived from this software without specific prior written permission.
- * *
- * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Author: 	Thomas Winischhofer <thomas@winischhofer.net>
- *		Silicon Integrated Systems, Inc. (used by permission)
- *
- */
-
-#ifndef _SIS_OSDEF_H_
-#define _SIS_OSDEF_H_
-
-/* The choices are: */
-#define SIS_LINUX_KERNEL		/* Linux kernel framebuffer */
-#undef  SIS_XORG_XF86			/* XFree86/X.org */
-
-#ifdef OutPortByte
-#undef OutPortByte
-#endif
-
-#ifdef OutPortWord
-#undef OutPortWord
-#endif
-
-#ifdef OutPortLong
-#undef OutPortLong
-#endif
-
-#ifdef InPortByte
-#undef InPortByte
-#endif
-
-#ifdef InPortWord
-#undef InPortWord
-#endif
-
-#ifdef InPortLong
-#undef InPortLong
-#endif
-
-/**********************************************************************/
-/*  LINUX KERNEL                                                      */
-/**********************************************************************/
-
-#ifdef SIS_LINUX_KERNEL
-
-#ifdef CONFIG_FB_SIS_300
-#define SIS300
-#endif
-
-#ifdef CONFIG_FB_SIS_315
-#define SIS315H
-#endif
-
-#if !defined(SIS300) && !defined(SIS315H)
-#warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set
-#warning sisfb will not work!
-#endif
-
-#define OutPortByte(p,v) outb((u8)(v),(SISIOADDRESS)(p))
-#define OutPortWord(p,v) outw((u16)(v),(SISIOADDRESS)(p))
-#define OutPortLong(p,v) outl((u32)(v),(SISIOADDRESS)(p))
-#define InPortByte(p)    inb((SISIOADDRESS)(p))
-#define InPortWord(p)    inw((SISIOADDRESS)(p))
-#define InPortLong(p)    inl((SISIOADDRESS)(p))
-#define SiS_SetMemory(MemoryAddress,MemorySize,value) memset_io(MemoryAddress, value, MemorySize)
-
-#endif /* LINUX_KERNEL */
-
-/**********************************************************************/
-/*  XFree86/X.org                                                    */
-/**********************************************************************/
-
-#ifdef SIS_XORG_XF86
-
-#define SIS300
-#define SIS315H
-
-#define OutPortByte(p,v) outSISREG((IOADDRESS)(p),(CARD8)(v))
-#define OutPortWord(p,v) outSISREGW((IOADDRESS)(p),(CARD16)(v))
-#define OutPortLong(p,v) outSISREGL((IOADDRESS)(p),(CARD32)(v))
-#define InPortByte(p)    inSISREG((IOADDRESS)(p))
-#define InPortWord(p)    inSISREGW((IOADDRESS)(p))
-#define InPortLong(p)    inSISREGL((IOADDRESS)(p))
-#define SiS_SetMemory(MemoryAddress,MemorySize,value) memset(MemoryAddress, value, MemorySize)
-
-#endif /* XF86 */
-
-#endif  /* _OSDEF_H_ */
diff --git a/drivers/video/sis/sis.h b/drivers/video/sis/sis.h
index 7c5710e3fb5..eac7a01925f 100644
--- a/drivers/video/sis/sis.h
+++ b/drivers/video/sis/sis.h
@@ -24,7 +24,6 @@
 #ifndef _SIS_H_
 #define _SIS_H_
 
-#include "osdef.h"
 #include <video/sisfb.h>
 
 #include "vgatypes.h"
@@ -308,58 +307,19 @@
 #define VB2_LCDOVER1600BRIDGE	(VB2_307T  | VB2_307LV)
 #define VB2_RAMDAC202MHZBRIDGE	(VB2_301C  | VB2_307T)
 
-/* I/O port access macros */
-#define inSISREG(base)		inb(base)
-
-#define outSISREG(base,val)	outb(val,base)
-
-#define orSISREG(base,val)      			\
-		do {					\
-			u8 __Temp = inSISREG(base); 	\
-			outSISREG(base, __Temp | (val));\
-		} while (0)
-
-#define andSISREG(base,val)     			\
-		do {					\
-			u8 __Temp = inSISREG(base); 	\
-			outSISREG(base, __Temp & (val));\
-		} while (0)
-
-#define inSISIDXREG(base,idx,var)			\
-		do {					\
-			outSISREG(base, idx); 		\
-			var = inSISREG((base)+1);	\
-		} while (0)
-
-#define outSISIDXREG(base,idx,val)			\
-		do {					\
-			outSISREG(base, idx);		\
-			outSISREG((base)+1, val);	\
-		} while (0)
-
-#define orSISIDXREG(base,idx,val)				\
-		do {						\
-			u8 __Temp; 				\
-			outSISREG(base, idx);   		\
-			__Temp = inSISREG((base)+1) | (val); 	\
-			outSISREG((base)+1, __Temp);		\
-		} while (0)
-
-#define andSISIDXREG(base,idx,and)				\
-		do {						\
-			u8 __Temp; 				\
-			outSISREG(base, idx);   		\
-			__Temp = inSISREG((base)+1) & (and); 	\
-			outSISREG((base)+1, __Temp);		\
-		} while (0)
-
-#define setSISIDXREG(base,idx,and,or)   				\
-		do {							\
-			u8 __Temp; 					\
-			outSISREG(base, idx);				\
-			__Temp = (inSISREG((base)+1) & (and)) | (or); 	\
-			outSISREG((base)+1, __Temp);			\
-		} while (0)
+/* I/O port access functions */
+
+void SiS_SetReg(SISIOADDRESS, u8, u8);
+void SiS_SetRegByte(SISIOADDRESS, u8);
+void SiS_SetRegShort(SISIOADDRESS, u16);
+void SiS_SetRegLong(SISIOADDRESS, u32);
+void SiS_SetRegANDOR(SISIOADDRESS, u8, u8, u8);
+void SiS_SetRegAND(SISIOADDRESS, u8, u8);
+void SiS_SetRegOR(SISIOADDRESS, u8, u8);
+u8 SiS_GetReg(SISIOADDRESS, u8);
+u8 SiS_GetRegByte(SISIOADDRESS);
+u16 SiS_GetRegShort(SISIOADDRESS);
+u32 SiS_GetRegLong(SISIOADDRESS);
 
 /* MMIO access macros */
 #define MMIO_IN8(base, offset)  readb((base+offset))
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index b52f8e4ef1f..2fb8c5a660f 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -60,6 +60,11 @@
 #include "sis.h"
 #include "sis_main.h"
 
+#if !defined(CONFIG_FB_SIS_300) && !defined(CONFIG_FB_SIS_315)
+#warning Neither CONFIG_FB_SIS_300 nor CONFIG_FB_SIS_315 is set
+#warning sisfb will not work!
+#endif
+
 static void sisfb_handle_command(struct sis_video_info *ivideo,
 				 struct sisfb_cmd *sisfb_command);
 
@@ -732,7 +737,7 @@ sisfb_bridgeisslave(struct sis_video_info *ivideo)
 	if(!(ivideo->vbflags2 & VB2_VIDEOBRIDGE))
 		return false;
 
-	inSISIDXREG(SISPART1,0x00,P1_00);
+	P1_00 = SiS_GetReg(SISPART1, 0x00);
 	if( ((ivideo->sisvga_engine == SIS_300_VGA) && (P1_00 & 0xa0) == 0x20) ||
 	    ((ivideo->sisvga_engine == SIS_315_VGA) && (P1_00 & 0x50) == 0x10) ) {
 		return true;
@@ -746,11 +751,11 @@ sisfballowretracecrt1(struct sis_video_info *ivideo)
 {
 	u8 temp;
 
-	inSISIDXREG(SISCR,0x17,temp);
+	temp = SiS_GetReg(SISCR, 0x17);
 	if(!(temp & 0x80))
 		return false;
 
-	inSISIDXREG(SISSR,0x1f,temp);
+	temp = SiS_GetReg(SISSR, 0x1f);
 	if(temp & 0xc0)
 		return false;
 
@@ -763,7 +768,7 @@ sisfbcheckvretracecrt1(struct sis_video_info *ivideo)
 	if(!sisfballowretracecrt1(ivideo))
 		return false;
 
-	if(inSISREG(SISINPSTAT) & 0x08)
+	if (SiS_GetRegByte(SISINPSTAT) & 0x08)
 		return true;
 	else
 		return false;
@@ -778,9 +783,9 @@ sisfbwaitretracecrt1(struct sis_video_info *ivideo)
 		return;
 
 	watchdog = 65536;
-	while((!(inSISREG(SISINPSTAT) & 0x08)) && --watchdog);
+	while ((!(SiS_GetRegByte(SISINPSTAT) & 0x08)) && --watchdog);
 	watchdog = 65536;
-	while((inSISREG(SISINPSTAT) & 0x08) && --watchdog);
+	while ((SiS_GetRegByte(SISINPSTAT) & 0x08) && --watchdog);
 }
 
 static bool
@@ -794,7 +799,7 @@ sisfbcheckvretracecrt2(struct sis_video_info *ivideo)
 	default:	  return false;
 	}
 
-	inSISIDXREG(SISPART1, reg, temp);
+	temp = SiS_GetReg(SISPART1, reg);
 	if(temp & 0x02)
 		return true;
 	else
@@ -832,10 +837,10 @@ sisfb_setupvbblankflags(struct sis_video_info *ivideo, u32 *vcount, u32 *hcount)
 			default:
 			case SIS_315_VGA: idx = 0x30; break;
 		}
-		inSISIDXREG(SISPART1,(idx+0),reg1); /* 30 */
-		inSISIDXREG(SISPART1,(idx+1),reg2); /* 31 */
-		inSISIDXREG(SISPART1,(idx+2),reg3); /* 32 */
-		inSISIDXREG(SISPART1,(idx+3),reg4); /* 33 */
+		reg1 = SiS_GetReg(SISPART1, (idx+0)); /* 30 */
+		reg2 = SiS_GetReg(SISPART1, (idx+1)); /* 31 */
+		reg3 = SiS_GetReg(SISPART1, (idx+2)); /* 32 */
+		reg4 = SiS_GetReg(SISPART1, (idx+3)); /* 33 */
 		if(reg1 & 0x01) ret |= FB_VBLANK_VBLANKING;
 		if(reg1 & 0x02) ret |= FB_VBLANK_VSYNCING;
 		if(reg4 & 0x80) ret |= FB_VBLANK_HBLANKING;
@@ -848,13 +853,13 @@ sisfb_setupvbblankflags(struct sis_video_info *ivideo, u32 *vcount, u32 *hcount)
 			FB_VBLANK_HAVE_VBLANK |
 			FB_VBLANK_HAVE_VCOUNT |
 			FB_VBLANK_HAVE_HCOUNT);
-		reg1 = inSISREG(SISINPSTAT);
+		reg1 = SiS_GetRegByte(SISINPSTAT);
 		if(reg1 & 0x08) ret |= FB_VBLANK_VSYNCING;
 		if(reg1 & 0x01) ret |= FB_VBLANK_VBLANKING;
-		inSISIDXREG(SISCR,0x20,reg1);
-		inSISIDXREG(SISCR,0x1b,reg1);
-		inSISIDXREG(SISCR,0x1c,reg2);
-		inSISIDXREG(SISCR,0x1d,reg3);
+		reg1 = SiS_GetReg(SISCR, 0x20);
+		reg1 = SiS_GetReg(SISCR, 0x1b);
+		reg2 = SiS_GetReg(SISCR, 0x1c);
+		reg3 = SiS_GetReg(SISCR, 0x1d);
 		(*vcount) = reg2 | ((reg3 & 0x07) << 8);
 		(*hcount) = (reg1 | ((reg3 & 0x10) << 4)) << 3;
 	}
@@ -925,12 +930,12 @@ sisfb_myblank(struct sis_video_info *ivideo, int blank)
 		     (ivideo->sisfb_thismonitor.feature & 0xe0))) {
 
 			if(ivideo->sisvga_engine == SIS_315_VGA) {
-				setSISIDXREG(SISCR, ivideo->SiS_Pr.SiS_MyCR63, 0xbf, cr63);
+				SiS_SetRegANDOR(SISCR, ivideo->SiS_Pr.SiS_MyCR63, 0xbf, cr63);
 			}
 
 			if(!(sisfb_bridgeisslave(ivideo))) {
-				setSISIDXREG(SISSR, 0x01, ~0x20, sr01);
-				setSISIDXREG(SISSR, 0x1f, 0x3f, sr1f);
+				SiS_SetRegANDOR(SISSR, 0x01, ~0x20, sr01);
+				SiS_SetRegANDOR(SISSR, 0x1f, 0x3f, sr1f);
 			}
 		}
 
@@ -960,25 +965,25 @@ sisfb_myblank(struct sis_video_info *ivideo, int blank)
 		    (ivideo->vbflags2 & (VB2_301|VB2_30xBDH|VB2_LVDS))) ||
 		   ((ivideo->sisvga_engine == SIS_315_VGA) &&
 		    ((ivideo->vbflags2 & (VB2_LVDS | VB2_CHRONTEL)) == VB2_LVDS))) {
-			setSISIDXREG(SISSR, 0x11, ~0x0c, sr11);
+			SiS_SetRegANDOR(SISSR, 0x11, ~0x0c, sr11);
 		}
 
 		if(ivideo->sisvga_engine == SIS_300_VGA) {
 			if((ivideo->vbflags2 & VB2_30xB) &&
 			   (!(ivideo->vbflags2 & VB2_30xBDH))) {
-				setSISIDXREG(SISPART1, 0x13, 0x3f, p1_13);
+				SiS_SetRegANDOR(SISPART1, 0x13, 0x3f, p1_13);
 			}
 		} else if(ivideo->sisvga_engine == SIS_315_VGA) {
 			if((ivideo->vbflags2 & VB2_30xB) &&
 			   (!(ivideo->vbflags2 & VB2_30xBDH))) {
-				setSISIDXREG(SISPART2, 0x00, 0x1f, p2_0);
+				SiS_SetRegANDOR(SISPART2, 0x00, 0x1f, p2_0);
 			}
 		}
 
 	} else if(ivideo->currentvbflags & CRT2_VGA) {
 
 		if(ivideo->vbflags2 & VB2_30xB) {
-			setSISIDXREG(SISPART2, 0x00, 0x1f, p2_0);
+			SiS_SetRegANDOR(SISPART2, 0x00, 0x1f, p2_0);
 		}
 
 	}
@@ -1109,15 +1114,15 @@ sisfb_set_pitch(struct sis_video_info *ivideo)
 
 	/* We need to set pitch for CRT1 if bridge is in slave mode, too */
 	if((ivideo->currentvbflags & VB_DISPTYPE_DISP1) || (isslavemode)) {
-		outSISIDXREG(SISCR,0x13,(HDisplay1 & 0xFF));
-		setSISIDXREG(SISSR,0x0E,0xF0,(HDisplay1 >> 8));
+		SiS_SetReg(SISCR, 0x13, (HDisplay1 & 0xFF));
+		SiS_SetRegANDOR(SISSR, 0x0E, 0xF0, (HDisplay1 >> 8));
 	}
 
 	/* We must not set the pitch for CRT2 if bridge is in slave mode */
 	if((ivideo->currentvbflags & VB_DISPTYPE_DISP2) && (!isslavemode)) {
-		orSISIDXREG(SISPART1,ivideo->CRT2_write_enable,0x01);
-		outSISIDXREG(SISPART1,0x07,(HDisplay2 & 0xFF));
-		setSISIDXREG(SISPART1,0x09,0xF0,(HDisplay2 >> 8));
+		SiS_SetRegOR(SISPART1, ivideo->CRT2_write_enable, 0x01);
+		SiS_SetReg(SISPART1, 0x07, (HDisplay2 & 0xFF));
+		SiS_SetRegANDOR(SISPART1, 0x09, 0xF0, (HDisplay2 >> 8));
 	}
 }
 
@@ -1162,7 +1167,7 @@ sisfb_set_mode(struct sis_video_info *ivideo, int clrscrn)
 	/* >=2.6.12's fbcon clears the screen anyway */
 	modeno |= 0x80;
 
-	outSISIDXREG(SISSR, IND_SIS_PASSWORD, SIS_PASSWORD);
+	SiS_SetReg(SISSR, IND_SIS_PASSWORD, SIS_PASSWORD);
 
 	sisfb_pre_setmode(ivideo);
 
@@ -1171,7 +1176,7 @@ sisfb_set_mode(struct sis_video_info *ivideo, int clrscrn)
 		return -EINVAL;
 	}
 
-	outSISIDXREG(SISSR, IND_SIS_PASSWORD, SIS_PASSWORD);
+	SiS_SetReg(SISSR, IND_SIS_PASSWORD, SIS_PASSWORD);
 
 	sisfb_post_setmode(ivideo);
 
@@ -1303,13 +1308,13 @@ sisfb_do_set_var(struct fb_var_screeninfo *var, int isactive, struct fb_info *in
 static void
 sisfb_set_base_CRT1(struct sis_video_info *ivideo, unsigned int base)
 {
-	outSISIDXREG(SISSR, IND_SIS_PASSWORD, SIS_PASSWORD);
+	SiS_SetReg(SISSR, IND_SIS_PASSWORD, SIS_PASSWORD);
 
-	outSISIDXREG(SISCR, 0x0D, base & 0xFF);
-	outSISIDXREG(SISCR, 0x0C, (base >> 8) & 0xFF);
-	outSISIDXREG(SISSR, 0x0D, (base >> 16) & 0xFF);
+	SiS_SetReg(SISCR, 0x0D, base & 0xFF);
+	SiS_SetReg(SISCR, 0x0C, (base >> 8) & 0xFF);
+	SiS_SetReg(SISSR, 0x0D, (base >> 16) & 0xFF);
 	if(ivideo->sisvga_engine == SIS_315_VGA) {
-		setSISIDXREG(SISSR, 0x37, 0xFE, (base >> 24) & 0x01);
+		SiS_SetRegANDOR(SISSR, 0x37, 0xFE, (base >> 24) & 0x01);
 	}
 }
 
@@ -1317,12 +1322,12 @@ static void
 sisfb_set_base_CRT2(struct sis_video_info *ivideo, unsigned int base)
 {
 	if(ivideo->currentvbflags & VB_DISPTYPE_DISP2) {
-		orSISIDXREG(SISPART1, ivideo->CRT2_write_enable, 0x01);
-		outSISIDXREG(SISPART1, 0x06, (base & 0xFF));
-		outSISIDXREG(SISPART1, 0x05, ((base >> 8) & 0xFF));
-		outSISIDXREG(SISPART1, 0x04, ((base >> 16) & 0xFF));
+		SiS_SetRegOR(SISPART1, ivideo->CRT2_write_enable, 0x01);
+		SiS_SetReg(SISPART1, 0x06, (base & 0xFF));
+		SiS_SetReg(SISPART1, 0x05, ((base >> 8) & 0xFF));
+		SiS_SetReg(SISPART1, 0x04, ((base >> 16) & 0xFF));
 		if(ivideo->sisvga_engine == SIS_315_VGA) {
-			setSISIDXREG(SISPART1, 0x02, 0x7F, ((base >> 24) & 0x01) << 7);
+			SiS_SetRegANDOR(SISPART1, 0x02, 0x7F, ((base >> 24) & 0x01) << 7);
 		}
 	}
 }
@@ -1383,15 +1388,15 @@ sisfb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
 
 	switch(info->var.bits_per_pixel) {
 	case 8:
-		outSISREG(SISDACA, regno);
-		outSISREG(SISDACD, (red >> 10));
-		outSISREG(SISDACD, (green >> 10));
-		outSISREG(SISDACD, (blue >> 10));
+		SiS_SetRegByte(SISDACA, regno);
+		SiS_SetRegByte(SISDACD, (red >> 10));
+		SiS_SetRegByte(SISDACD, (green >> 10));
+		SiS_SetRegByte(SISDACD, (blue >> 10));
 		if(ivideo->currentvbflags & VB_DISPTYPE_DISP2) {
-			outSISREG(SISDAC2A, regno);
-			outSISREG(SISDAC2D, (red >> 8));
-			outSISREG(SISDAC2D, (green >> 8));
-			outSISREG(SISDAC2D, (blue >> 8));
+			SiS_SetRegByte(SISDAC2A, regno);
+			SiS_SetRegByte(SISDAC2D, (red >> 8));
+			SiS_SetRegByte(SISDAC2D, (green >> 8));
+			SiS_SetRegByte(SISDAC2D, (blue >> 8));
 		}
 		break;
 	case 16:
@@ -1956,7 +1961,7 @@ sisfb_get_dram_size(struct sis_video_info *ivideo)
 	switch(ivideo->chip) {
 #ifdef CONFIG_FB_SIS_300
 	case SIS_300:
-		inSISIDXREG(SISSR, 0x14, reg);
+		reg = SiS_GetReg(SISSR, 0x14);
 		ivideo->video_size = ((reg & 0x3F) + 1) << 20;
 		break;
 	case SIS_540:
@@ -1972,7 +1977,7 @@ sisfb_get_dram_size(struct sis_video_info *ivideo)
 	case SIS_315H:
 	case SIS_315PRO:
 	case SIS_315:
-		inSISIDXREG(SISSR, 0x14, reg);
+		reg = SiS_GetReg(SISSR, 0x14);
 		ivideo->video_size = (1 << ((reg & 0xf0) >> 4)) << 20;
 		switch((reg >> 2) & 0x03) {
 		case 0x01:
@@ -1984,31 +1989,31 @@ sisfb_get_dram_size(struct sis_video_info *ivideo)
 		}
 		break;
 	case SIS_330:
-		inSISIDXREG(SISSR, 0x14, reg);
+		reg = SiS_GetReg(SISSR, 0x14);
 		ivideo->video_size = (1 << ((reg & 0xf0) >> 4)) << 20;
 		if(reg & 0x0c) ivideo->video_size <<= 1;
 		break;
 	case SIS_550:
 	case SIS_650:
 	case SIS_740:
-		inSISIDXREG(SISSR, 0x14, reg);
+		reg = SiS_GetReg(SISSR, 0x14);
 		ivideo->video_size = (((reg & 0x3f) + 1) << 2) << 20;
 		break;
 	case SIS_661:
 	case SIS_741:
-		inSISIDXREG(SISCR, 0x79, reg);
+		reg = SiS_GetReg(SISCR, 0x79);
 		ivideo->video_size = (1 << ((reg & 0xf0) >> 4)) << 20;
 		break;
 	case SIS_660:
 	case SIS_760:
 	case SIS_761:
-		inSISIDXREG(SISCR, 0x79, reg);
+		reg = SiS_GetReg(SISCR, 0x79);
 		reg = (reg & 0xf0) >> 4;
 		if(reg)	{
 			ivideo->video_size = (1 << reg) << 20;
 			ivideo->UMAsize = ivideo->video_size;
 		}
-		inSISIDXREG(SISCR, 0x78, reg);
+		reg = SiS_GetReg(SISCR, 0x78);
 		reg &= 0x30;
 		if(reg) {
 			if(reg == 0x10) {
@@ -2022,7 +2027,7 @@ sisfb_get_dram_size(struct sis_video_info *ivideo)
 	case SIS_340:
 	case XGI_20:
 	case XGI_40:
-		inSISIDXREG(SISSR, 0x14, reg);
+		reg = SiS_GetReg(SISSR, 0x14);
 		ivideo->video_size = (1 << ((reg & 0xf0) >> 4)) << 20;
 		if(ivideo->chip != XGI_20) {
 			reg = (reg & 0x0c) >> 2;
@@ -2056,11 +2061,11 @@ sisfb_detect_VB_connect(struct sis_video_info *ivideo)
 
 #ifdef CONFIG_FB_SIS_300
 	if(ivideo->sisvga_engine == SIS_300_VGA) {
-		inSISIDXREG(SISSR, 0x17, temp);
+		temp = SiS_GetReg(SISSR, 0x17);
 		if((temp & 0x0F) && (ivideo->chip != SIS_300)) {
 			/* PAL/NTSC is stored on SR16 on such machines */
 			if(!(ivideo->vbflags & (TV_PAL | TV_NTSC | TV_PALM | TV_PALN))) {
-				inSISIDXREG(SISSR, 0x16, temp);
+				temp = SiS_GetReg(SISSR, 0x16);
 				if(temp & 0x20)
 					ivideo->vbflags |= TV_PAL;
 				else
@@ -2070,7 +2075,7 @@ sisfb_detect_VB_connect(struct sis_video_info *ivideo)
 	}
 #endif
 
-	inSISIDXREG(SISCR, 0x32, cr32);
+	cr32 = SiS_GetReg(SISCR, 0x32);
 
 	if(cr32 & SIS_CRT1) {
 		ivideo->sisfb_crt1off = 0;
@@ -2146,15 +2151,15 @@ sisfb_detect_VB_connect(struct sis_video_info *ivideo)
 	    }
 	    if(!(ivideo->vbflags & (TV_PAL | TV_NTSC | TV_PALM | TV_PALN | TV_NTSCJ))) {
 		if(ivideo->sisvga_engine == SIS_300_VGA) {
-			inSISIDXREG(SISSR, 0x38, temp);
+			temp = SiS_GetReg(SISSR, 0x38);
 			if(temp & 0x01) ivideo->vbflags |= TV_PAL;
 			else		ivideo->vbflags |= TV_NTSC;
 		} else if((ivideo->chip <= SIS_315PRO) || (ivideo->chip >= SIS_330)) {
-			inSISIDXREG(SISSR, 0x38, temp);
+			temp = SiS_GetReg(SISSR, 0x38);
 			if(temp & 0x01) ivideo->vbflags |= TV_PAL;
 			else		ivideo->vbflags |= TV_NTSC;
 		} else {
-			inSISIDXREG(SISCR, 0x79, temp);
+			temp = SiS_GetReg(SISCR, 0x79);
 			if(temp & 0x20)	ivideo->vbflags |= TV_PAL;
 			else		ivideo->vbflags |= TV_NTSC;
 		}
@@ -2193,26 +2198,26 @@ sisfb_sense_crt1(struct sis_video_info *ivideo)
     u16 temp = 0xffff;
     int i;
 
-    inSISIDXREG(SISSR,0x1F,sr1F);
-    orSISIDXREG(SISSR,0x1F,0x04);
-    andSISIDXREG(SISSR,0x1F,0x3F);
+    sr1F = SiS_GetReg(SISSR, 0x1F);
+    SiS_SetRegOR(SISSR, 0x1F, 0x04);
+    SiS_SetRegAND(SISSR, 0x1F, 0x3F);
     if(sr1F & 0xc0) mustwait = true;
 
 #ifdef CONFIG_FB_SIS_315
     if(ivideo->sisvga_engine == SIS_315_VGA) {
-       inSISIDXREG(SISCR,ivideo->SiS_Pr.SiS_MyCR63,cr63);
+       cr63 = SiS_GetReg(SISCR, ivideo->SiS_Pr.SiS_MyCR63);
        cr63 &= 0x40;
-       andSISIDXREG(SISCR,ivideo->SiS_Pr.SiS_MyCR63,0xBF);
+       SiS_SetRegAND(SISCR, ivideo->SiS_Pr.SiS_MyCR63, 0xBF);
     }
 #endif
 
-    inSISIDXREG(SISCR,0x17,cr17);
+    cr17 = SiS_GetReg(SISCR, 0x17);
     cr17 &= 0x80;
     if(!cr17) {
-       orSISIDXREG(SISCR,0x17,0x80);
+       SiS_SetRegOR(SISCR, 0x17, 0x80);
        mustwait = true;
-       outSISIDXREG(SISSR, 0x00, 0x01);
-       outSISIDXREG(SISSR, 0x00, 0x03);
+       SiS_SetReg(SISSR, 0x00, 0x01);
+       SiS_SetReg(SISSR, 0x00, 0x03);
     }
 
     if(mustwait) {
@@ -2221,18 +2226,18 @@ sisfb_sense_crt1(struct sis_video_info *ivideo)
 
 #ifdef CONFIG_FB_SIS_315
     if(ivideo->chip >= SIS_330) {
-       andSISIDXREG(SISCR,0x32,~0x20);
+       SiS_SetRegAND(SISCR, 0x32, ~0x20);
        if(ivideo->chip >= SIS_340) {
-          outSISIDXREG(SISCR, 0x57, 0x4a);
+	   SiS_SetReg(SISCR, 0x57, 0x4a);
        } else {
-          outSISIDXREG(SISCR, 0x57, 0x5f);
+	   SiS_SetReg(SISCR, 0x57, 0x5f);
        }
-       orSISIDXREG(SISCR, 0x53, 0x02);
-       while((inSISREG(SISINPSTAT)) & 0x01)    break;
-       while(!((inSISREG(SISINPSTAT)) & 0x01)) break;
-       if((inSISREG(SISMISCW)) & 0x10) temp = 1;
-       andSISIDXREG(SISCR, 0x53, 0xfd);
-       andSISIDXREG(SISCR, 0x57, 0x00);
+	SiS_SetRegOR(SISCR, 0x53, 0x02);
+	while ((SiS_GetRegByte(SISINPSTAT)) & 0x01)    break;
+	while (!((SiS_GetRegByte(SISINPSTAT)) & 0x01)) break;
+	if ((SiS_GetRegByte(SISMISCW)) & 0x10) temp = 1;
+	SiS_SetRegAND(SISCR, 0x53, 0xfd);
+	SiS_SetRegAND(SISCR, 0x57, 0x00);
     }
 #endif
 
@@ -2249,18 +2254,18 @@ sisfb_sense_crt1(struct sis_video_info *ivideo)
     }
 
     if((temp) && (temp != 0xffff)) {
-       orSISIDXREG(SISCR,0x32,0x20);
+       SiS_SetRegOR(SISCR, 0x32, 0x20);
     }
 
 #ifdef CONFIG_FB_SIS_315
     if(ivideo->sisvga_engine == SIS_315_VGA) {
-       setSISIDXREG(SISCR,ivideo->SiS_Pr.SiS_MyCR63,0xBF,cr63);
+	SiS_SetRegANDOR(SISCR, ivideo->SiS_Pr.SiS_MyCR63, 0xBF, cr63);
     }
 #endif
 
-    setSISIDXREG(SISCR,0x17,0x7F,cr17);
+    SiS_SetRegANDOR(SISCR, 0x17, 0x7F, cr17);
 
-    outSISIDXREG(SISSR,0x1F,sr1F);
+    SiS_SetReg(SISSR, 0x1F, sr1F);
 }
 
 /* Determine and detect attached devices on SiS30x */
@@ -2281,7 +2286,7 @@ SiS_SenseLCD(struct sis_video_info *ivideo)
 		return;
 
 	/* If LCD already set up by BIOS, skip it */
-	inSISIDXREG(SISCR, 0x32, reg);
+	reg = SiS_GetReg(SISCR, 0x32);
 	if(reg & 0x08)
 		return;
 
@@ -2344,10 +2349,10 @@ SiS_SenseLCD(struct sis_video_info *ivideo)
 	else
 		cr37 |= 0xc0;
 
-	outSISIDXREG(SISCR, 0x36, paneltype);
+	SiS_SetReg(SISCR, 0x36, paneltype);
 	cr37 &= 0xf1;
-	setSISIDXREG(SISCR, 0x37, 0x0c, cr37);
-	orSISIDXREG(SISCR, 0x32, 0x08);
+	SiS_SetRegANDOR(SISCR, 0x37, 0x0c, cr37);
+	SiS_SetRegOR(SISCR, 0x32, 0x08);
 
 	ivideo->SiS_Pr.PanelSelfDetected = true;
 }
@@ -2361,19 +2366,19 @@ SISDoSense(struct sis_video_info *ivideo, u16 type, u16 test)
        result = 0;
        for(i = 0; i < 3; i++) {
           mytest = test;
-          outSISIDXREG(SISPART4,0x11,(type & 0x00ff));
+	   SiS_SetReg(SISPART4, 0x11, (type & 0x00ff));
           temp = (type >> 8) | (mytest & 0x00ff);
-          setSISIDXREG(SISPART4,0x10,0xe0,temp);
+	  SiS_SetRegANDOR(SISPART4, 0x10, 0xe0, temp);
           SiS_DDC2Delay(&ivideo->SiS_Pr, 0x1500);
           mytest >>= 8;
           mytest &= 0x7f;
-          inSISIDXREG(SISPART4,0x03,temp);
+	   temp = SiS_GetReg(SISPART4, 0x03);
           temp ^= 0x0e;
           temp &= mytest;
           if(temp == mytest) result++;
 #if 1
-	  outSISIDXREG(SISPART4,0x11,0x00);
-	  andSISIDXREG(SISPART4,0x10,0xe0);
+	  SiS_SetReg(SISPART4, 0x11, 0x00);
+	  SiS_SetRegAND(SISPART4, 0x10, 0xe0);
 	  SiS_DDC2Delay(&ivideo->SiS_Pr, 0x1000);
 #endif
        }
@@ -2395,7 +2400,7 @@ SiS_Sense30x(struct sis_video_info *ivideo)
 
     if(ivideo->vbflags2 & VB2_301) {
        svhs = 0x00b9; cvbs = 0x00b3; vga2 = 0x00d1;
-       inSISIDXREG(SISPART4,0x01,myflag);
+       myflag = SiS_GetReg(SISPART4, 0x01);
        if(myflag & 0x04) {
 	  svhs = 0x00dd; cvbs = 0x00ee; vga2 = 0x00fd;
        }
@@ -2425,7 +2430,7 @@ SiS_Sense30x(struct sis_video_info *ivideo)
     }
 
     if(ivideo->chip == SIS_300) {
-       inSISIDXREG(SISSR,0x3b,myflag);
+       myflag = SiS_GetReg(SISSR, 0x3b);
        if(!(myflag & 0x01)) vga2 = vga2_c = 0;
     }
 
@@ -2433,93 +2438,93 @@ SiS_Sense30x(struct sis_video_info *ivideo)
        vga2 = vga2_c = 0;
     }
 
-    inSISIDXREG(SISSR,0x1e,backupSR_1e);
-    orSISIDXREG(SISSR,0x1e,0x20);
+    backupSR_1e = SiS_GetReg(SISSR, 0x1e);
+    SiS_SetRegOR(SISSR, 0x1e, 0x20);
 
-    inSISIDXREG(SISPART4,0x0d,backupP4_0d);
+    backupP4_0d = SiS_GetReg(SISPART4, 0x0d);
     if(ivideo->vbflags2 & VB2_30xC) {
-       setSISIDXREG(SISPART4,0x0d,~0x07,0x01);
+	SiS_SetRegANDOR(SISPART4, 0x0d, ~0x07, 0x01);
     } else {
-       orSISIDXREG(SISPART4,0x0d,0x04);
+       SiS_SetRegOR(SISPART4, 0x0d, 0x04);
     }
     SiS_DDC2Delay(&ivideo->SiS_Pr, 0x2000);
 
-    inSISIDXREG(SISPART2,0x00,backupP2_00);
-    outSISIDXREG(SISPART2,0x00,((backupP2_00 | 0x1c) & 0xfc));
+    backupP2_00 = SiS_GetReg(SISPART2, 0x00);
+    SiS_SetReg(SISPART2, 0x00, ((backupP2_00 | 0x1c) & 0xfc));
 
-    inSISIDXREG(SISPART2,0x4d,backupP2_4d);
+    backupP2_4d = SiS_GetReg(SISPART2, 0x4d);
     if(ivideo->vbflags2 & VB2_SISYPBPRBRIDGE) {
-       outSISIDXREG(SISPART2,0x4d,(backupP2_4d & ~0x10));
+	SiS_SetReg(SISPART2, 0x4d, (backupP2_4d & ~0x10));
     }
 
     if(!(ivideo->vbflags2 & VB2_30xCLV)) {
        SISDoSense(ivideo, 0, 0);
     }
 
-    andSISIDXREG(SISCR, 0x32, ~0x14);
+    SiS_SetRegAND(SISCR, 0x32, ~0x14);
 
     if(vga2_c || vga2) {
        if(SISDoSense(ivideo, vga2, vga2_c)) {
           if(biosflag & 0x01) {
 	     printk(KERN_INFO "%s %s SCART output\n", stdstr, tvstr);
-	     orSISIDXREG(SISCR, 0x32, 0x04);
+	     SiS_SetRegOR(SISCR, 0x32, 0x04);
 	  } else {
 	     printk(KERN_INFO "%s secondary VGA connection\n", stdstr);
-	     orSISIDXREG(SISCR, 0x32, 0x10);
+	     SiS_SetRegOR(SISCR, 0x32, 0x10);
 	  }
        }
     }
 
-    andSISIDXREG(SISCR, 0x32, 0x3f);
+    SiS_SetRegAND(SISCR, 0x32, 0x3f);
 
     if(ivideo->vbflags2 & VB2_30xCLV) {
-       orSISIDXREG(SISPART4,0x0d,0x04);
+       SiS_SetRegOR(SISPART4, 0x0d, 0x04);
     }
 
     if((ivideo->sisvga_engine == SIS_315_VGA) && (ivideo->vbflags2 & VB2_SISYPBPRBRIDGE)) {
-       outSISIDXREG(SISPART2,0x4d,(backupP2_4d | 0x10));
+       SiS_SetReg(SISPART2, 0x4d, (backupP2_4d | 0x10));
        SiS_DDC2Delay(&ivideo->SiS_Pr, 0x2000);
        if((result = SISDoSense(ivideo, svhs, 0x0604))) {
           if((result = SISDoSense(ivideo, cvbs, 0x0804))) {
 	     printk(KERN_INFO "%s %s YPbPr component output\n", stdstr, tvstr);
-	     orSISIDXREG(SISCR,0x32,0x80);
+	     SiS_SetRegOR(SISCR, 0x32, 0x80);
 	  }
        }
-       outSISIDXREG(SISPART2,0x4d,backupP2_4d);
+       SiS_SetReg(SISPART2, 0x4d, backupP2_4d);
     }
 
-    andSISIDXREG(SISCR, 0x32, ~0x03);
+    SiS_SetRegAND(SISCR, 0x32, ~0x03);
 
     if(!(ivideo->vbflags & TV_YPBPR)) {
        if((result = SISDoSense(ivideo, svhs, svhs_c))) {
           printk(KERN_INFO "%s %s SVIDEO output\n", stdstr, tvstr);
-          orSISIDXREG(SISCR, 0x32, 0x02);
+	   SiS_SetRegOR(SISCR, 0x32, 0x02);
        }
        if((biosflag & 0x02) || (!result)) {
           if(SISDoSense(ivideo, cvbs, cvbs_c)) {
 	     printk(KERN_INFO "%s %s COMPOSITE output\n", stdstr, tvstr);
-	     orSISIDXREG(SISCR, 0x32, 0x01);
+	     SiS_SetRegOR(SISCR, 0x32, 0x01);
           }
        }
     }
 
     SISDoSense(ivideo, 0, 0);
 
-    outSISIDXREG(SISPART2,0x00,backupP2_00);
-    outSISIDXREG(SISPART4,0x0d,backupP4_0d);
-    outSISIDXREG(SISSR,0x1e,backupSR_1e);
+    SiS_SetReg(SISPART2, 0x00, backupP2_00);
+    SiS_SetReg(SISPART4, 0x0d, backupP4_0d);
+    SiS_SetReg(SISSR, 0x1e, backupSR_1e);
 
     if(ivideo->vbflags2 & VB2_30xCLV) {
-       inSISIDXREG(SISPART2,0x00,biosflag);
+	biosflag = SiS_GetReg(SISPART2, 0x00);
        if(biosflag & 0x20) {
           for(myflag = 2; myflag > 0; myflag--) {
 	     biosflag ^= 0x20;
-	     outSISIDXREG(SISPART2,0x00,biosflag);
+	     SiS_SetReg(SISPART2, 0x00, biosflag);
 	  }
        }
     }
 
-    outSISIDXREG(SISPART2,0x00,backupP2_00);
+    SiS_SetReg(SISPART2, 0x00, backupP2_00);
 }
 
 /* Determine and detect attached TV's on Chrontel */
@@ -2583,20 +2588,20 @@ SiS_SenseCh(struct sis_video_info *ivideo)
 	   if(temp1 == 0x02) {
 		printk(KERN_INFO "%s SVIDEO output\n", stdstr);
 		ivideo->vbflags |= TV_SVIDEO;
-		orSISIDXREG(SISCR, 0x32, 0x02);
-		andSISIDXREG(SISCR, 0x32, ~0x05);
+		SiS_SetRegOR(SISCR, 0x32, 0x02);
+		SiS_SetRegAND(SISCR, 0x32, ~0x05);
 	   } else if (temp1 == 0x01) {
 		printk(KERN_INFO "%s CVBS output\n", stdstr);
 		ivideo->vbflags |= TV_AVIDEO;
-		orSISIDXREG(SISCR, 0x32, 0x01);
-		andSISIDXREG(SISCR, 0x32, ~0x06);
+		SiS_SetRegOR(SISCR, 0x32, 0x01);
+		SiS_SetRegAND(SISCR, 0x32, ~0x06);
 	   } else {
 		SiS_SetCH70xxANDOR(&ivideo->SiS_Pr, 0x0e, 0x01, 0xF8);
-		andSISIDXREG(SISCR, 0x32, ~0x07);
+		SiS_SetRegAND(SISCR, 0x32, ~0x07);
 	   }
        } else if(temp1 == 0) {
 	  SiS_SetCH70xxANDOR(&ivideo->SiS_Pr, 0x0e, 0x01, 0xF8);
-	  andSISIDXREG(SISCR, 0x32, ~0x07);
+	  SiS_SetRegAND(SISCR, 0x32, ~0x07);
        }
        /* Set general purpose IO for Chrontel communication */
        SiS_SetChrontelGPIO(&ivideo->SiS_Pr, 0x00);
@@ -2627,22 +2632,22 @@ SiS_SenseCh(struct sis_video_info *ivideo)
 	case 0x01:
 	     printk(KERN_INFO "%s CVBS output\n", stdstr);
 	     ivideo->vbflags |= TV_AVIDEO;
-	     orSISIDXREG(SISCR, 0x32, 0x01);
-	     andSISIDXREG(SISCR, 0x32, ~0x06);
+	     SiS_SetRegOR(SISCR, 0x32, 0x01);
+	     SiS_SetRegAND(SISCR, 0x32, ~0x06);
 	     break;
 	case 0x02:
 	     printk(KERN_INFO "%s SVIDEO output\n", stdstr);
 	     ivideo->vbflags |= TV_SVIDEO;
-	     orSISIDXREG(SISCR, 0x32, 0x02);
-	     andSISIDXREG(SISCR, 0x32, ~0x05);
+	     SiS_SetRegOR(SISCR, 0x32, 0x02);
+	     SiS_SetRegAND(SISCR, 0x32, ~0x05);
 	     break;
 	case 0x04:
 	     printk(KERN_INFO "%s SCART output\n", stdstr);
-	     orSISIDXREG(SISCR, 0x32, 0x04);
-	     andSISIDXREG(SISCR, 0x32, ~0x03);
+	     SiS_SetRegOR(SISCR, 0x32, 0x04);
+	     SiS_SetRegAND(SISCR, 0x32, ~0x03);
 	     break;
 	default:
-	     andSISIDXREG(SISCR, 0x32, ~0x07);
+	     SiS_SetRegAND(SISCR, 0x32, ~0x07);
 	}
 #endif
     }
@@ -2660,10 +2665,10 @@ sisfb_get_VB_type(struct sis_video_info *ivideo)
 	if(ivideo->chip == XGI_20)
 		return;
 
-	inSISIDXREG(SISPART4, 0x00, vb_chipid);
+	vb_chipid = SiS_GetReg(SISPART4, 0x00);
 	switch(vb_chipid) {
 	case 0x01:
-		inSISIDXREG(SISPART4, 0x01, reg);
+		reg = SiS_GetReg(SISPART4, 0x01);
 		if(reg < 0xb0) {
 			ivideo->vbflags |= VB_301;	/* Deprecated */
 			ivideo->vbflags2 |= VB2_301;
@@ -2671,7 +2676,7 @@ sisfb_get_VB_type(struct sis_video_info *ivideo)
 		} else if(reg < 0xc0) {
 			ivideo->vbflags |= VB_301B;	/* Deprecated */
 			ivideo->vbflags2 |= VB2_301B;
-			inSISIDXREG(SISPART4,0x23,reg);
+			reg = SiS_GetReg(SISPART4, 0x23);
 			if(!(reg & 0x02)) {
 			   ivideo->vbflags |= VB_30xBDH;	/* Deprecated */
 			   ivideo->vbflags2 |= VB2_30xBDH;
@@ -2688,7 +2693,7 @@ sisfb_get_VB_type(struct sis_video_info *ivideo)
 			ivideo->vbflags2 |= VB2_301LV;
 			printk(KERN_INFO "%s SiS301LV %s\n", stdstr, bridgestr);
 		} else if(reg <= 0xe1) {
-			inSISIDXREG(SISPART4,0x39,reg);
+			reg = SiS_GetReg(SISPART4, 0x39);
 			if(reg == 0xff) {
 			   ivideo->vbflags |= VB_302LV;	/* Deprecated */
 			   ivideo->vbflags2 |= VB2_302LV;
@@ -2713,7 +2718,7 @@ sisfb_get_VB_type(struct sis_video_info *ivideo)
 	}
 
 	if((!(ivideo->vbflags2 & VB2_VIDEOBRIDGE)) && (ivideo->chip != SIS_300)) {
-		inSISIDXREG(SISCR, 0x37, reg);
+		reg = SiS_GetReg(SISCR, 0x37);
 		reg &= SIS_EXTERNAL_CHIP_MASK;
 		reg >>= 1;
 		if(ivideo->sisvga_engine == SIS_300_VGA) {
@@ -2754,7 +2759,7 @@ sisfb_get_VB_type(struct sis_video_info *ivideo)
 #endif
 		} else if(ivideo->chip >= SIS_661) {
 #ifdef CONFIG_FB_SIS_315
-			inSISIDXREG(SISCR, 0x38, reg);
+			reg = SiS_GetReg(SISCR, 0x38);
 			reg >>= 5;
 			switch(reg) {
 			   case 0x02:
@@ -2817,13 +2822,13 @@ sisfb_engine_init(struct sis_video_info *ivideo)
 
 		tqueue_pos = (ivideo->video_size - ivideo->cmdQueueSize) / (64 * 1024);
 
-		inSISIDXREG(SISSR, IND_SIS_TURBOQUEUE_SET, tq_state);
+		tq_state = SiS_GetReg(SISSR, IND_SIS_TURBOQUEUE_SET);
 		tq_state |= 0xf0;
 		tq_state &= 0xfc;
 		tq_state |= (u8)(tqueue_pos >> 8);
-		outSISIDXREG(SISSR, IND_SIS_TURBOQUEUE_SET, tq_state);
+		SiS_SetReg(SISSR, IND_SIS_TURBOQUEUE_SET, tq_state);
 
-		outSISIDXREG(SISSR, IND_SIS_TURBOQUEUE_ADR, (u8)(tqueue_pos & 0xff));
+		SiS_SetReg(SISSR, IND_SIS_TURBOQUEUE_ADR, (u8)(tqueue_pos & 0xff));
 
 		ivideo->caps |= TURBO_QUEUE_CAP;
 	}
@@ -2860,8 +2865,8 @@ sisfb_engine_init(struct sis_video_info *ivideo)
 			}
 		}
 
-		outSISIDXREG(SISSR, IND_SIS_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
-		outSISIDXREG(SISSR, IND_SIS_CMDQUEUE_SET, SIS_CMD_QUEUE_RESET);
+		SiS_SetReg(SISSR, IND_SIS_CMDQUEUE_THRESHOLD, COMMAND_QUEUE_THRESHOLD);
+		SiS_SetReg(SISSR, IND_SIS_CMDQUEUE_SET, SIS_CMD_QUEUE_RESET);
 
 		if((ivideo->chip >= XGI_40) && ivideo->modechanged) {
 			/* Must disable dual pipe on XGI_40. Can't do
@@ -2873,7 +2878,7 @@ sisfb_engine_init(struct sis_video_info *ivideo)
 
 				MMIO_OUT32(ivideo->mmio_vbase, Q_WRITE_PTR, 0);
 
-				outSISIDXREG(SISSR, IND_SIS_CMDQUEUE_SET, (temp | SIS_VRAM_CMDQUEUE_ENABLE));
+				SiS_SetReg(SISSR, IND_SIS_CMDQUEUE_SET, (temp | SIS_VRAM_CMDQUEUE_ENABLE));
 
 				tempq = MMIO_IN32(ivideo->mmio_vbase, Q_READ_PTR);
 				MMIO_OUT32(ivideo->mmio_vbase, Q_WRITE_PTR, tempq);
@@ -2890,7 +2895,7 @@ sisfb_engine_init(struct sis_video_info *ivideo)
 
 				sisfb_syncaccel(ivideo);
 
-				outSISIDXREG(SISSR, IND_SIS_CMDQUEUE_SET, SIS_CMD_QUEUE_RESET);
+				SiS_SetReg(SISSR, IND_SIS_CMDQUEUE_SET, SIS_CMD_QUEUE_RESET);
 
 			}
 		}
@@ -2899,7 +2904,7 @@ sisfb_engine_init(struct sis_video_info *ivideo)
 		MMIO_OUT32(ivideo->mmio_vbase, MMIO_QUEUE_WRITEPORT, tempq);
 
 		temp |= (SIS_MMIO_CMD_ENABLE | SIS_CMD_AUTO_CORR);
-		outSISIDXREG(SISSR, IND_SIS_CMDQUEUE_SET, temp);
+		SiS_SetReg(SISSR, IND_SIS_CMDQUEUE_SET, temp);
 
 		tempq = (u32)(ivideo->video_size - ivideo->cmdQueueSize);
 		MMIO_OUT32(ivideo->mmio_vbase, MMIO_QUEUE_PHYBASE, tempq);
@@ -2917,7 +2922,7 @@ sisfb_detect_lcd_type(struct sis_video_info *ivideo)
 	u8 reg;
 	int i;
 
-	inSISIDXREG(SISCR, 0x36, reg);
+	reg = SiS_GetReg(SISCR, 0x36);
 	reg &= 0x0f;
 	if(ivideo->sisvga_engine == SIS_300_VGA) {
 		ivideo->CRT2LCDType = sis300paneltype[reg];
@@ -2936,8 +2941,8 @@ sisfb_detect_lcd_type(struct sis_video_info *ivideo)
 	if(ivideo->CRT2LCDType == LCD_UNKNOWN) {
 		/* For broken BIOSes: Assume 1024x768, RGB18 */
 		ivideo->CRT2LCDType = LCD_1024x768;
-		setSISIDXREG(SISCR,0x36,0xf0,0x02);
-		setSISIDXREG(SISCR,0x37,0xee,0x01);
+		SiS_SetRegANDOR(SISCR, 0x36, 0xf0, 0x02);
+		SiS_SetRegANDOR(SISCR, 0x37, 0xee, 0x01);
 		printk(KERN_DEBUG "sisfb: Invalid panel ID (%02x), assuming 1024x768, RGB18\n", reg);
 	}
 
@@ -2975,10 +2980,10 @@ sisfb_save_pdc_emi(struct sis_video_info *ivideo)
 	if(ivideo->sisvga_engine == SIS_300_VGA) {
 		if(ivideo->vbflags2 & (VB2_LVDS | VB2_30xBDH)) {
 			int tmp;
-			inSISIDXREG(SISCR,0x30,tmp);
+			tmp = SiS_GetReg(SISCR, 0x30);
 			if(tmp & 0x20) {
 				/* Currently on LCD? If yes, read current pdc */
-				inSISIDXREG(SISPART1,0x13,ivideo->detectedpdc);
+				ivideo->detectedpdc = SiS_GetReg(SISPART1, 0x13);
 				ivideo->detectedpdc &= 0x3c;
 				if(ivideo->SiS_Pr.PDC == -1) {
 					/* Let option override detection */
@@ -3002,7 +3007,7 @@ sisfb_save_pdc_emi(struct sis_video_info *ivideo)
 		/* Try to find about LCDA */
 		if(ivideo->vbflags2 & VB2_SISLCDABRIDGE) {
 			int tmp;
-			inSISIDXREG(SISPART1,0x13,tmp);
+			tmp = SiS_GetReg(SISPART1, 0x13);
 			if(tmp & 0x04) {
 				ivideo->SiS_Pr.SiS_UseLCDA = true;
 				ivideo->detectedlcda = 0x03;
@@ -3012,16 +3017,16 @@ sisfb_save_pdc_emi(struct sis_video_info *ivideo)
 		/* Save PDC */
 		if(ivideo->vbflags2 & VB2_SISLVDSBRIDGE) {
 			int tmp;
-			inSISIDXREG(SISCR,0x30,tmp);
+			tmp = SiS_GetReg(SISCR, 0x30);
 			if((tmp & 0x20) || (ivideo->detectedlcda != 0xff)) {
 				/* Currently on LCD? If yes, read current pdc */
 				u8 pdc;
-				inSISIDXREG(SISPART1,0x2D,pdc);
+				pdc = SiS_GetReg(SISPART1, 0x2D);
 				ivideo->detectedpdc  = (pdc & 0x0f) << 1;
 				ivideo->detectedpdca = (pdc & 0xf0) >> 3;
-				inSISIDXREG(SISPART1,0x35,pdc);
+				pdc = SiS_GetReg(SISPART1, 0x35);
 				ivideo->detectedpdc |= ((pdc >> 7) & 0x01);
-				inSISIDXREG(SISPART1,0x20,pdc);
+				pdc = SiS_GetReg(SISPART1, 0x20);
 				ivideo->detectedpdca |= ((pdc >> 6) & 0x01);
 				if(ivideo->newrom) {
 					/* New ROM invalidates other PDC resp. */
@@ -3055,10 +3060,10 @@ sisfb_save_pdc_emi(struct sis_video_info *ivideo)
 
 			/* Save EMI */
 			if(ivideo->vbflags2 & VB2_SISEMIBRIDGE) {
-				inSISIDXREG(SISPART4,0x30,ivideo->SiS_Pr.EMI_30);
-				inSISIDXREG(SISPART4,0x31,ivideo->SiS_Pr.EMI_31);
-				inSISIDXREG(SISPART4,0x32,ivideo->SiS_Pr.EMI_32);
-				inSISIDXREG(SISPART4,0x33,ivideo->SiS_Pr.EMI_33);
+				ivideo->SiS_Pr.EMI_30 = SiS_GetReg(SISPART4, 0x30);
+				ivideo->SiS_Pr.EMI_31 = SiS_GetReg(SISPART4, 0x31);
+				ivideo->SiS_Pr.EMI_32 = SiS_GetReg(SISPART4, 0x32);
+				ivideo->SiS_Pr.EMI_33 = SiS_GetReg(SISPART4, 0x33);
 				ivideo->SiS_Pr.HaveEMI = true;
 				if((tmp & 0x20) || (ivideo->detectedlcda != 0xff)) {
 					ivideo->SiS_Pr.HaveEMILCD = true;
@@ -3483,8 +3488,8 @@ sisfb_check_engine_and_sync(struct sis_video_info *ivideo)
 	 * ivideo->accel here, as this might have
 	 * been changed before this is called.
 	 */
-	inSISIDXREG(SISSR, IND_SIS_PCI_ADDRESS_SET, cr30);
-	inSISIDXREG(SISSR, IND_SIS_MODULE_ENABLE, cr31);
+	cr30 = SiS_GetReg(SISSR, IND_SIS_PCI_ADDRESS_SET);
+	cr31 = SiS_GetReg(SISSR, IND_SIS_MODULE_ENABLE);
 	/* MMIO and 2D/3D engine enabled? */
 	if((cr30 & SIS_MEM_MAP_IO_ENABLE) && (cr31 & 0x42)) {
 #ifdef CONFIG_FB_SIS_300
@@ -3502,7 +3507,7 @@ sisfb_check_engine_and_sync(struct sis_video_info *ivideo)
 			 * enabled, and that the queue
 			 * is not in the state of "reset"
 			 */
-			inSISIDXREG(SISSR, 0x26, cr30);
+			cr30 = SiS_GetReg(SISSR, 0x26);
 			if((cr30 & 0xe0) && (!(cr30 & 0x01))) {
 				sisfb_syncaccel(ivideo);
 			}
@@ -3519,9 +3524,9 @@ sisfb_pre_setmode(struct sis_video_info *ivideo)
 
 	ivideo->currentvbflags &= (VB_VIDEOBRIDGE | VB_DISPTYPE_DISP2);
 
-	outSISIDXREG(SISSR, 0x05, 0x86);
+	SiS_SetReg(SISSR, 0x05, 0x86);
 
-	inSISIDXREG(SISCR, 0x31, cr31);
+	cr31 = SiS_GetReg(SISCR, 0x31);
 	cr31 &= ~0x60;
 	cr31 |= 0x04;
 
@@ -3530,11 +3535,11 @@ sisfb_pre_setmode(struct sis_video_info *ivideo)
 #ifdef CONFIG_FB_SIS_315
 	if(ivideo->sisvga_engine == SIS_315_VGA) {
 	   if(ivideo->chip >= SIS_661) {
-	      inSISIDXREG(SISCR, 0x38, cr38);
+	      cr38 = SiS_GetReg(SISCR, 0x38);
 	      cr38 &= ~0x07;  /* Clear LCDA/DualEdge and YPbPr bits */
 	   } else {
 	      tvregnum = 0x38;
-	      inSISIDXREG(SISCR, tvregnum, cr38);
+	      cr38 = SiS_GetReg(SISCR, tvregnum);
 	      cr38 &= ~0x3b;  /* Clear LCDA/DualEdge and YPbPr bits */
 	   }
 	}
@@ -3542,7 +3547,7 @@ sisfb_pre_setmode(struct sis_video_info *ivideo)
 #ifdef CONFIG_FB_SIS_300
 	if(ivideo->sisvga_engine == SIS_300_VGA) {
 	   tvregnum = 0x35;
-	   inSISIDXREG(SISCR, tvregnum, cr38);
+	   cr38 = SiS_GetReg(SISCR, tvregnum);
 	}
 #endif
 
@@ -3649,20 +3654,20 @@ sisfb_pre_setmode(struct sis_video_info *ivideo)
 	      cr31 |= (SIS_DRIVER_MODE | SIS_VB_OUTPUT_DISABLE);
 	}
 
-	outSISIDXREG(SISCR, 0x30, cr30);
-	outSISIDXREG(SISCR, 0x33, cr33);
+	SiS_SetReg(SISCR, 0x30, cr30);
+	SiS_SetReg(SISCR, 0x33, cr33);
 
 	if(ivideo->chip >= SIS_661) {
 #ifdef CONFIG_FB_SIS_315
 	   cr31 &= ~0x01;                          /* Clear PAL flag (now in CR35) */
-	   setSISIDXREG(SISCR, 0x35, ~0x10, cr35); /* Leave overscan bit alone */
+	   SiS_SetRegANDOR(SISCR, 0x35, ~0x10, cr35); /* Leave overscan bit alone */
 	   cr38 &= 0x07;                           /* Use only LCDA and HiVision/YPbPr bits */
-	   setSISIDXREG(SISCR, 0x38, 0xf8, cr38);
+	   SiS_SetRegANDOR(SISCR, 0x38, 0xf8, cr38);
 #endif
 	} else if(ivideo->chip != SIS_300) {
-	   outSISIDXREG(SISCR, tvregnum, cr38);
+	   SiS_SetReg(SISCR, tvregnum, cr38);
 	}
-	outSISIDXREG(SISCR, 0x31, cr31);
+	SiS_SetReg(SISCR, 0x31, cr31);
 
 	ivideo->SiS_Pr.SiS_UseOEM = ivideo->sisfb_useoem;
 
@@ -3677,15 +3682,15 @@ sisfb_fixup_SR11(struct sis_video_info *ivideo)
 	u8  tmpreg;
 
 	if(ivideo->chip >= SIS_661) {
-		inSISIDXREG(SISSR,0x11,tmpreg);
+		tmpreg = SiS_GetReg(SISSR, 0x11);
 		if(tmpreg & 0x20) {
-			inSISIDXREG(SISSR,0x3e,tmpreg);
+			tmpreg = SiS_GetReg(SISSR, 0x3e);
 			tmpreg = (tmpreg + 1) & 0xff;
-			outSISIDXREG(SISSR,0x3e,tmpreg);
-			inSISIDXREG(SISSR,0x11,tmpreg);
+			SiS_SetReg(SISSR, 0x3e, tmpreg);
+			tmpreg = SiS_GetReg(SISSR, 0x11);
 		}
 		if(tmpreg & 0xf0) {
-			andSISIDXREG(SISSR,0x11,0x0f);
+			SiS_SetRegAND(SISSR, 0x11, 0x0f);
 		}
 	}
 }
@@ -3711,7 +3716,7 @@ sisfb_set_TVxposoffset(struct sis_video_info *ivideo, int val)
 			case 1:
 				x += val;
 				if(x < 0) x = 0;
-				outSISIDXREG(SISSR,0x05,0x86);
+				SiS_SetReg(SISSR, 0x05, 0x86);
 				SiS_SetCH700x(&ivideo->SiS_Pr, 0x0a, (x & 0xff));
 				SiS_SetCH70xxANDOR(&ivideo->SiS_Pr, 0x08, ((x & 0x0100) >> 7), 0xFD);
 				break;
@@ -3740,11 +3745,11 @@ sisfb_set_TVxposoffset(struct sis_video_info *ivideo, int val)
 			temp += (val * 2);
 			p2_43 = temp & 0xff;
 			p2_42 = (temp & 0xf00) >> 4;
-			outSISIDXREG(SISPART2,0x1f,p2_1f);
-			setSISIDXREG(SISPART2,0x20,0x0F,p2_20);
-			setSISIDXREG(SISPART2,0x2b,0xF0,p2_2b);
-			setSISIDXREG(SISPART2,0x42,0x0F,p2_42);
-			outSISIDXREG(SISPART2,0x43,p2_43);
+			SiS_SetReg(SISPART2, 0x1f, p2_1f);
+			SiS_SetRegANDOR(SISPART2, 0x20, 0x0F, p2_20);
+			SiS_SetRegANDOR(SISPART2, 0x2b, 0xF0, p2_2b);
+			SiS_SetRegANDOR(SISPART2, 0x42, 0x0F, p2_42);
+			SiS_SetReg(SISPART2, 0x43, p2_43);
 		}
 	}
 }
@@ -3769,7 +3774,7 @@ sisfb_set_TVyposoffset(struct sis_video_info *ivideo, int val)
 			case 1:
 				y -= val;
 				if(y < 0) y = 0;
-				outSISIDXREG(SISSR,0x05,0x86);
+				SiS_SetReg(SISSR, 0x05, 0x86);
 				SiS_SetCH700x(&ivideo->SiS_Pr, 0x0b, (y & 0xff));
 				SiS_SetCH70xxANDOR(&ivideo->SiS_Pr, 0x08, ((y & 0x0100) >> 8), 0xFE);
 				break;
@@ -3793,8 +3798,8 @@ sisfb_set_TVyposoffset(struct sis_video_info *ivideo, int val)
 					p2_02 += 2;
 				}
 			}
-			outSISIDXREG(SISPART2,0x01,p2_01);
-			outSISIDXREG(SISPART2,0x02,p2_02);
+			SiS_SetReg(SISPART2, 0x01, p2_01);
+			SiS_SetReg(SISPART2, 0x02, p2_02);
 		}
 	}
 }
@@ -3811,7 +3816,7 @@ sisfb_post_setmode(struct sis_video_info *ivideo)
 	u8 reg1;
 #endif
 
-	outSISIDXREG(SISSR, 0x05, 0x86);
+	SiS_SetReg(SISSR, 0x05, 0x86);
 
 #ifdef CONFIG_FB_SIS_315
 	sisfb_fixup_SR11(ivideo);
@@ -3835,7 +3840,7 @@ sisfb_post_setmode(struct sis_video_info *ivideo)
 			crt1isoff = false;
 			reg = 0x80;
 		}
-		setSISIDXREG(SISCR, 0x17, 0x7f, reg);
+		SiS_SetRegANDOR(SISCR, 0x17, 0x7f, reg);
 	}
 #endif
 #ifdef CONFIG_FB_SIS_315
@@ -3849,8 +3854,8 @@ sisfb_post_setmode(struct sis_video_info *ivideo)
 			reg  = 0x00;
 			reg1 = 0x00;
 		}
-		setSISIDXREG(SISCR, ivideo->SiS_Pr.SiS_MyCR63, ~0x40, reg);
-		setSISIDXREG(SISSR, 0x1f, ~0xc0, reg1);
+		SiS_SetRegANDOR(SISCR, ivideo->SiS_Pr.SiS_MyCR63, ~0x40, reg);
+		SiS_SetRegANDOR(SISSR, 0x1f, 0x3f, reg1);
 	}
 #endif
 
@@ -3866,17 +3871,17 @@ sisfb_post_setmode(struct sis_video_info *ivideo)
 		}
 	}
 
-	andSISIDXREG(SISSR, IND_SIS_RAMDAC_CONTROL, ~0x04);
+	SiS_SetRegAND(SISSR, IND_SIS_RAMDAC_CONTROL, ~0x04);
 
 	if(ivideo->currentvbflags & CRT2_TV) {
 		if(ivideo->vbflags2 & VB2_SISBRIDGE) {
-			inSISIDXREG(SISPART2,0x1f,ivideo->p2_1f);
-			inSISIDXREG(SISPART2,0x20,ivideo->p2_20);
-			inSISIDXREG(SISPART2,0x2b,ivideo->p2_2b);
-			inSISIDXREG(SISPART2,0x42,ivideo->p2_42);
-			inSISIDXREG(SISPART2,0x43,ivideo->p2_43);
-			inSISIDXREG(SISPART2,0x01,ivideo->p2_01);
-			inSISIDXREG(SISPART2,0x02,ivideo->p2_02);
+			ivideo->p2_1f = SiS_GetReg(SISPART2, 0x1f);
+			ivideo->p2_20 = SiS_GetReg(SISPART2, 0x20);
+			ivideo->p2_2b = SiS_GetReg(SISPART2, 0x2b);
+			ivideo->p2_42 = SiS_GetReg(SISPART2, 0x42);
+			ivideo->p2_43 = SiS_GetReg(SISPART2, 0x43);
+			ivideo->p2_01 = SiS_GetReg(SISPART2, 0x01);
+			ivideo->p2_02 = SiS_GetReg(SISPART2, 0x02);
 		} else if(ivideo->vbflags2 & VB2_CHRONTEL) {
 			if(ivideo->chronteltype == 1) {
 				ivideo->tvx = SiS_GetCH700x(&ivideo->SiS_Pr, 0x0a);
@@ -4100,7 +4105,6 @@ sisfb_find_rom(struct pci_dev *pdev)
 	struct sis_video_info *ivideo = pci_get_drvdata(pdev);
 	void __iomem *rom_base;
 	unsigned char *myrombase = NULL;
-	u32 temp;
 	size_t romsize;
 
 	/* First, try the official pci ROM functions (except
@@ -4114,14 +4118,6 @@ sisfb_find_rom(struct pci_dev *pdev)
 			if(sisfb_check_rom(rom_base, ivideo)) {
 
 				if((myrombase = vmalloc(65536))) {
-
-					/* Work around bug in pci/rom.c: Folks forgot to check
-					 * whether the size retrieved from the BIOS image eventually
-					 * is larger than the mapped size
-					 */
-					if(pci_resource_len(pdev, PCI_ROM_RESOURCE) < romsize)
-						romsize = pci_resource_len(pdev, PCI_ROM_RESOURCE);
-
 					memcpy_fromio(myrombase, rom_base,
 							(romsize > 65536) ? 65536 : romsize);
 				}
@@ -4135,43 +4131,29 @@ sisfb_find_rom(struct pci_dev *pdev)
 	/* Otherwise do it the conventional way. */
 
 #if defined(__i386__) || defined(__x86_64__)
+	{
+		u32 temp;
 
-	for(temp = 0x000c0000; temp < 0x000f0000; temp += 0x00001000) {
-
-		rom_base = ioremap(temp, 65536);
-		if(!rom_base)
-			continue;
-
-		if(!sisfb_check_rom(rom_base, ivideo)) {
-			iounmap(rom_base);
-			continue;
-		}
-
-		if((myrombase = vmalloc(65536)))
-			memcpy_fromio(myrombase, rom_base, 65536);
+		for (temp = 0x000c0000; temp < 0x000f0000; temp += 0x00001000) {
 
-		iounmap(rom_base);
-		break;
+			rom_base = ioremap(temp, 65536);
+			if (!rom_base)
+				continue;
 
-        }
+			if (!sisfb_check_rom(rom_base, ivideo)) {
+				iounmap(rom_base);
+				continue;
+			}
 
-#else
+			if ((myrombase = vmalloc(65536)))
+				memcpy_fromio(myrombase, rom_base, 65536);
 
-	pci_read_config_dword(pdev, PCI_ROM_ADDRESS, &temp);
-	pci_write_config_dword(pdev, PCI_ROM_ADDRESS,
-			(ivideo->video_base & PCI_ROM_ADDRESS_MASK) | PCI_ROM_ADDRESS_ENABLE);
+			iounmap(rom_base);
+			break;
 
-	rom_base = ioremap(ivideo->video_base, 65536);
-	if(rom_base) {
-		if(sisfb_check_rom(rom_base, ivideo)) {
-			if((myrombase = vmalloc(65536)))
-				memcpy_fromio(myrombase, rom_base, 65536);
 		}
-		iounmap(rom_base);
-	}
-
-	pci_write_config_dword(pdev, PCI_ROM_ADDRESS, temp);
 
+	}
 #endif
 
 	return myrombase;
@@ -4181,6 +4163,9 @@ static void __devinit
 sisfb_post_map_vram(struct sis_video_info *ivideo, unsigned int *mapsize,
 			unsigned int min)
 {
+	if (*mapsize < (min << 20))
+		return;
+
 	ivideo->video_vbase = ioremap(ivideo->video_base, (*mapsize));
 
 	if(!ivideo->video_vbase) {
@@ -4209,10 +4194,10 @@ sisfb_post_300_buswidth(struct sis_video_info *ivideo)
 	unsigned char reg;
 	int i, j;
 
-	andSISIDXREG(SISSR, 0x15, 0xFB);
-	orSISIDXREG(SISSR, 0x15, 0x04);
-	outSISIDXREG(SISSR, 0x13, 0x00);
-	outSISIDXREG(SISSR, 0x14, 0xBF);
+	SiS_SetRegAND(SISSR, 0x15, 0xFB);
+	SiS_SetRegOR(SISSR, 0x15, 0x04);
+	SiS_SetReg(SISSR, 0x13, 0x00);
+	SiS_SetReg(SISSR, 0x14, 0xBF);
 
 	for(i = 0; i < 2; i++) {
 		temp = 0x1234;
@@ -4220,12 +4205,12 @@ sisfb_post_300_buswidth(struct sis_video_info *ivideo)
 			writew(temp, FBAddress);
 			if(readw(FBAddress) == temp)
 				break;
-			orSISIDXREG(SISSR, 0x3c, 0x01);
-			inSISIDXREG(SISSR, 0x05, reg);
-			inSISIDXREG(SISSR, 0x05, reg);
-			andSISIDXREG(SISSR, 0x3c, 0xfe);
-			inSISIDXREG(SISSR, 0x05, reg);
-			inSISIDXREG(SISSR, 0x05, reg);
+			SiS_SetRegOR(SISSR, 0x3c, 0x01);
+			reg = SiS_GetReg(SISSR, 0x05);
+			reg = SiS_GetReg(SISSR, 0x05);
+			SiS_SetRegAND(SISSR, 0x3c, 0xfe);
+			reg = SiS_GetReg(SISSR, 0x05);
+			reg = SiS_GetReg(SISSR, 0x05);
 			temp++;
 		}
 	}
@@ -4235,7 +4220,7 @@ sisfb_post_300_buswidth(struct sis_video_info *ivideo)
 	writel(0x89ABCDEFL, (FBAddress + 8));
 	writel(0xCDEF0123L, (FBAddress + 12));
 
-	inSISIDXREG(SISSR, 0x3b, reg);
+	reg = SiS_GetReg(SISSR, 0x3b);
 	if(reg & 0x01) {
 		if(readl((FBAddress + 12)) == 0xCDEF0123L)
 			return 4;	/* Channel A 128bit */
@@ -4298,13 +4283,13 @@ sisfb_post_300_rwtest(struct sis_video_info *ivideo, int iteration, int buswidth
 		PhysicalAdrHalfPage = (PageCapacity / 2 + PhysicalAdrHigh) % PageCapacity;
 		PhysicalAdrOtherPage = PageCapacity * SiS_DRAMType[k][2] + PhysicalAdrHigh;
 
-		andSISIDXREG(SISSR, 0x15, 0xFB); /* Test */
-		orSISIDXREG(SISSR, 0x15, 0x04);  /* Test */
+		SiS_SetRegAND(SISSR, 0x15, 0xFB); /* Test */
+		SiS_SetRegOR(SISSR, 0x15, 0x04);  /* Test */
 		sr14 = (SiS_DRAMType[k][3] * buswidth) - 1;
 		if(buswidth == 4)      sr14 |= 0x80;
 		else if(buswidth == 2) sr14 |= 0x40;
-		outSISIDXREG(SISSR, 0x13, SiS_DRAMType[k][4]);
-		outSISIDXREG(SISSR, 0x14, sr14);
+		SiS_SetReg(SISSR, 0x13, SiS_DRAMType[k][4]);
+		SiS_SetReg(SISSR, 0x14, sr14);
 
 		BankNumHigh <<= 16;
 		BankNumMid <<= 16;
@@ -4371,13 +4356,13 @@ sisfb_post_sis300(struct pci_dev *pdev)
 	if(!ivideo->SiS_Pr.UseROM)
 		bios = NULL;
 
-	outSISIDXREG(SISSR, 0x05, 0x86);
+	SiS_SetReg(SISSR, 0x05, 0x86);
 
 	if(bios) {
 		if(bios[0x52] & 0x80) {
 			memtype = bios[0x52];
 		} else {
-			inSISIDXREG(SISSR, 0x3a, memtype);
+			memtype = SiS_GetReg(SISSR, 0x3a);
 		}
 		memtype &= 0x07;
 	}
@@ -4401,19 +4386,19 @@ sisfb_post_sis300(struct pci_dev *pdev)
 			v6 = bios[rindex++];
 		}
 	}
-	outSISIDXREG(SISSR, 0x28, v1);
-	outSISIDXREG(SISSR, 0x29, v2);
-	outSISIDXREG(SISSR, 0x2a, v3);
-	outSISIDXREG(SISSR, 0x2e, v4);
-	outSISIDXREG(SISSR, 0x2f, v5);
-	outSISIDXREG(SISSR, 0x30, v6);
+	SiS_SetReg(SISSR, 0x28, v1);
+	SiS_SetReg(SISSR, 0x29, v2);
+	SiS_SetReg(SISSR, 0x2a, v3);
+	SiS_SetReg(SISSR, 0x2e, v4);
+	SiS_SetReg(SISSR, 0x2f, v5);
+	SiS_SetReg(SISSR, 0x30, v6);
 
 	v1 = 0x10;
 	if(bios)
 		v1 = bios[0xa4];
-	outSISIDXREG(SISSR, 0x07, v1);       /* DAC speed */
+	SiS_SetReg(SISSR, 0x07, v1);       /* DAC speed */
 
-	outSISIDXREG(SISSR, 0x11, 0x0f);     /* DDC, power save */
+	SiS_SetReg(SISSR, 0x11, 0x0f);     /* DDC, power save */
 
 	v1 = 0x01; v2 = 0x43; v3 = 0x1e; v4 = 0x2a;
 	v5 = 0x06; v6 = 0x00; v7 = 0x00; v8 = 0x00;
@@ -4430,91 +4415,91 @@ sisfb_post_sis300(struct pci_dev *pdev)
 	}
 	if(ivideo->revision_id >= 0x80)
 		v3 &= 0xfd;
-	outSISIDXREG(SISSR, 0x15, v1);       /* Ram type (assuming 0, BIOS 0xa5 step 8) */
-	outSISIDXREG(SISSR, 0x16, v2);
-	outSISIDXREG(SISSR, 0x17, v3);
-	outSISIDXREG(SISSR, 0x18, v4);
-	outSISIDXREG(SISSR, 0x19, v5);
-	outSISIDXREG(SISSR, 0x1a, v6);
-	outSISIDXREG(SISSR, 0x1b, v7);
-	outSISIDXREG(SISSR, 0x1c, v8);	   /* ---- */
-	andSISIDXREG(SISSR, 0x15 ,0xfb);
-	orSISIDXREG(SISSR, 0x15, 0x04);
+	SiS_SetReg(SISSR, 0x15, v1);       /* Ram type (assuming 0, BIOS 0xa5 step 8) */
+	SiS_SetReg(SISSR, 0x16, v2);
+	SiS_SetReg(SISSR, 0x17, v3);
+	SiS_SetReg(SISSR, 0x18, v4);
+	SiS_SetReg(SISSR, 0x19, v5);
+	SiS_SetReg(SISSR, 0x1a, v6);
+	SiS_SetReg(SISSR, 0x1b, v7);
+	SiS_SetReg(SISSR, 0x1c, v8);	   /* ---- */
+	SiS_SetRegAND(SISSR, 0x15, 0xfb);
+	SiS_SetRegOR(SISSR, 0x15, 0x04);
 	if(bios) {
 		if(bios[0x53] & 0x02) {
-			orSISIDXREG(SISSR, 0x19, 0x20);
+			SiS_SetRegOR(SISSR, 0x19, 0x20);
 		}
 	}
 	v1 = 0x04;			   /* DAC pedestal (BIOS 0xe5) */
 	if(ivideo->revision_id >= 0x80)
 		v1 |= 0x01;
-	outSISIDXREG(SISSR, 0x1f, v1);
-	outSISIDXREG(SISSR, 0x20, 0xa4);     /* linear & relocated io & disable a0000 */
+	SiS_SetReg(SISSR, 0x1f, v1);
+	SiS_SetReg(SISSR, 0x20, 0xa4);     /* linear & relocated io & disable a0000 */
 	v1 = 0xf6; v2 = 0x0d; v3 = 0x00;
 	if(bios) {
 		v1 = bios[0xe8];
 		v2 = bios[0xe9];
 		v3 = bios[0xea];
 	}
-	outSISIDXREG(SISSR, 0x23, v1);
-	outSISIDXREG(SISSR, 0x24, v2);
-	outSISIDXREG(SISSR, 0x25, v3);
-	outSISIDXREG(SISSR, 0x21, 0x84);
-	outSISIDXREG(SISSR, 0x22, 0x00);
-	outSISIDXREG(SISCR, 0x37, 0x00);
-	orSISIDXREG(SISPART1, 0x24, 0x01);   /* unlock crt2 */
-	outSISIDXREG(SISPART1, 0x00, 0x00);
+	SiS_SetReg(SISSR, 0x23, v1);
+	SiS_SetReg(SISSR, 0x24, v2);
+	SiS_SetReg(SISSR, 0x25, v3);
+	SiS_SetReg(SISSR, 0x21, 0x84);
+	SiS_SetReg(SISSR, 0x22, 0x00);
+	SiS_SetReg(SISCR, 0x37, 0x00);
+	SiS_SetRegOR(SISPART1, 0x24, 0x01);   /* unlock crt2 */
+	SiS_SetReg(SISPART1, 0x00, 0x00);
 	v1 = 0x40; v2 = 0x11;
 	if(bios) {
 		v1 = bios[0xec];
 		v2 = bios[0xeb];
 	}
-	outSISIDXREG(SISPART1, 0x02, v1);
+	SiS_SetReg(SISPART1, 0x02, v1);
 
 	if(ivideo->revision_id >= 0x80)
 		v2 &= ~0x01;
 
-	inSISIDXREG(SISPART4, 0x00, reg);
+	reg = SiS_GetReg(SISPART4, 0x00);
 	if((reg == 1) || (reg == 2)) {
-		outSISIDXREG(SISCR, 0x37, 0x02);
-		outSISIDXREG(SISPART2, 0x00, 0x1c);
+		SiS_SetReg(SISCR, 0x37, 0x02);
+		SiS_SetReg(SISPART2, 0x00, 0x1c);
 		v4 = 0x00; v5 = 0x00; v6 = 0x10;
 		if(ivideo->SiS_Pr.UseROM) {
 			v4 = bios[0xf5];
 			v5 = bios[0xf6];
 			v6 = bios[0xf7];
 		}
-		outSISIDXREG(SISPART4, 0x0d, v4);
-		outSISIDXREG(SISPART4, 0x0e, v5);
-		outSISIDXREG(SISPART4, 0x10, v6);
-		outSISIDXREG(SISPART4, 0x0f, 0x3f);
-		inSISIDXREG(SISPART4, 0x01, reg);
+		SiS_SetReg(SISPART4, 0x0d, v4);
+		SiS_SetReg(SISPART4, 0x0e, v5);
+		SiS_SetReg(SISPART4, 0x10, v6);
+		SiS_SetReg(SISPART4, 0x0f, 0x3f);
+		reg = SiS_GetReg(SISPART4, 0x01);
 		if(reg >= 0xb0) {
-			inSISIDXREG(SISPART4, 0x23, reg);
+			reg = SiS_GetReg(SISPART4, 0x23);
 			reg &= 0x20;
 			reg <<= 1;
-			outSISIDXREG(SISPART4, 0x23, reg);
+			SiS_SetReg(SISPART4, 0x23, reg);
 		}
 	} else {
 		v2 &= ~0x10;
 	}
-	outSISIDXREG(SISSR, 0x32, v2);
+	SiS_SetReg(SISSR, 0x32, v2);
 
-	andSISIDXREG(SISPART1, 0x24, 0xfe);  /* Lock CRT2 */
+	SiS_SetRegAND(SISPART1, 0x24, 0xfe);  /* Lock CRT2 */
 
-	inSISIDXREG(SISSR, 0x16, reg);
+	reg = SiS_GetReg(SISSR, 0x16);
 	reg &= 0xc3;
-	outSISIDXREG(SISCR, 0x35, reg);
-	outSISIDXREG(SISCR, 0x83, 0x00);
+	SiS_SetReg(SISCR, 0x35, reg);
+	SiS_SetReg(SISCR, 0x83, 0x00);
 #if !defined(__i386__) && !defined(__x86_64__)
 	if(sisfb_videoram) {
-		outSISIDXREG(SISSR, 0x13, 0x28);  /* ? */
+		SiS_SetReg(SISSR, 0x13, 0x28);  /* ? */
 		reg = ((sisfb_videoram >> 10) - 1) | 0x40;
-		outSISIDXREG(SISSR, 0x14, reg);
+		SiS_SetReg(SISSR, 0x14, reg);
 	} else {
 #endif
 		/* Need to map max FB size for finding out about RAM size */
-		mapsize = 64 << 20;
+		mapsize = ivideo->video_size;
 		sisfb_post_map_vram(ivideo, &mapsize, 4);
 
 		if(ivideo->video_vbase) {
@@ -4523,8 +4508,8 @@ sisfb_post_sis300(struct pci_dev *pdev)
 		} else {
 			printk(KERN_DEBUG
 				"sisfb: Failed to map memory for size detection, assuming 8MB\n");
-			outSISIDXREG(SISSR, 0x13, 0x28);  /* ? */
-			outSISIDXREG(SISSR, 0x14, 0x47);  /* 8MB, 64bit default */
+			SiS_SetReg(SISSR, 0x13, 0x28);  /* ? */
+			SiS_SetReg(SISSR, 0x14, 0x47);  /* 8MB, 64bit default */
 		}
 #if !defined(__i386__) && !defined(__x86_64__)
 	}
@@ -4533,7 +4518,7 @@ sisfb_post_sis300(struct pci_dev *pdev)
 		v1 = bios[0xe6];
 		v2 = bios[0xe7];
 	} else {
-		inSISIDXREG(SISSR, 0x3a, reg);
+		reg = SiS_GetReg(SISSR, 0x3a);
 		if((reg & 0x30) == 0x30) {
 			v1 = 0x04; /* PCI */
 			v2 = 0x92;
@@ -4542,8 +4527,8 @@ sisfb_post_sis300(struct pci_dev *pdev)
 			v2 = 0xb2;
 		}
 	}
-	outSISIDXREG(SISSR, 0x21, v1);
-	outSISIDXREG(SISSR, 0x22, v2);
+	SiS_SetReg(SISSR, 0x21, v1);
+	SiS_SetReg(SISSR, 0x22, v2);
 
 	/* Sense CRT1 */
 	sisfb_sense_crt1(ivideo);
@@ -4556,13 +4541,13 @@ sisfb_post_sis300(struct pci_dev *pdev)
 	ivideo->SiS_Pr.VideoMemorySize = 8 << 20;
 	SiSSetMode(&ivideo->SiS_Pr, 0x2e | 0x80);
 
-	outSISIDXREG(SISSR, 0x05, 0x86);
+	SiS_SetReg(SISSR, 0x05, 0x86);
 
 	/* Display off */
-	orSISIDXREG(SISSR, 0x01, 0x20);
+	SiS_SetRegOR(SISSR, 0x01, 0x20);
 
 	/* Save mode number in CR34 */
-	outSISIDXREG(SISCR, 0x34, 0x2e);
+	SiS_SetReg(SISCR, 0x34, 0x2e);
 
 	/* Let everyone know what the current mode is */
 	ivideo->modeprechange = 0x2e;
@@ -4585,7 +4570,7 @@ sisfb_post_xgi_delay(struct sis_video_info *ivideo, int delay)
 	u8 reg;
 
 	for(i = 0; i <= (delay * 10 * 36); i++) {
-		inSISIDXREG(SISSR, 0x05, reg);
+		reg = SiS_GetReg(SISSR, 0x05);
 		reg++;
 	}
 }
@@ -4677,84 +4662,84 @@ sisfb_post_xgi_ramsize(struct sis_video_info *ivideo)
 	 * - if running on non-x86, there usually is no VGA window
 	 *   at a0000.
 	 */
-	orSISIDXREG(SISSR, 0x20, (0x80 | 0x04));
+	SiS_SetRegOR(SISSR, 0x20, (0x80 | 0x04));
 
 	/* Need to map max FB size for finding out about RAM size */
-	mapsize = 256 << 20;
+	mapsize = ivideo->video_size;
 	sisfb_post_map_vram(ivideo, &mapsize, 32);
 
 	if(!ivideo->video_vbase) {
 		printk(KERN_ERR "sisfb: Unable to detect RAM size. Setting default.\n");
-		outSISIDXREG(SISSR, 0x13, 0x35);
-		outSISIDXREG(SISSR, 0x14, 0x41);
+		SiS_SetReg(SISSR, 0x13, 0x35);
+		SiS_SetReg(SISSR, 0x14, 0x41);
 		/* TODO */
 		return;
 	}
 
 	/* Non-interleaving */
-	outSISIDXREG(SISSR, 0x15, 0x00);
+	SiS_SetReg(SISSR, 0x15, 0x00);
 	/* No tiling */
-	outSISIDXREG(SISSR, 0x1c, 0x00);
+	SiS_SetReg(SISSR, 0x1c, 0x00);
 
 	if(ivideo->chip == XGI_20) {
 
 		channelab = 1;
-		inSISIDXREG(SISCR, 0x97, reg);
+		reg = SiS_GetReg(SISCR, 0x97);
 		if(!(reg & 0x01)) {	/* Single 32/16 */
 			buswidth = 32;
-			outSISIDXREG(SISSR, 0x13, 0xb1);
-			outSISIDXREG(SISSR, 0x14, 0x52);
+			SiS_SetReg(SISSR, 0x13, 0xb1);
+			SiS_SetReg(SISSR, 0x14, 0x52);
 			sisfb_post_xgi_delay(ivideo, 1);
 			sr14 = 0x02;
 			if(sisfb_post_xgi_rwtest(ivideo, 23, 24, mapsize))
 				goto bail_out;
 
-			outSISIDXREG(SISSR, 0x13, 0x31);
-			outSISIDXREG(SISSR, 0x14, 0x42);
+			SiS_SetReg(SISSR, 0x13, 0x31);
+			SiS_SetReg(SISSR, 0x14, 0x42);
 			sisfb_post_xgi_delay(ivideo, 1);
 			if(sisfb_post_xgi_rwtest(ivideo, 23, 23, mapsize))
 				goto bail_out;
 
 			buswidth = 16;
-			outSISIDXREG(SISSR, 0x13, 0xb1);
-			outSISIDXREG(SISSR, 0x14, 0x41);
+			SiS_SetReg(SISSR, 0x13, 0xb1);
+			SiS_SetReg(SISSR, 0x14, 0x41);
 			sisfb_post_xgi_delay(ivideo, 1);
 			sr14 = 0x01;
 			if(sisfb_post_xgi_rwtest(ivideo, 22, 23, mapsize))
 				goto bail_out;
 			else
-				outSISIDXREG(SISSR, 0x13, 0x31);
+				SiS_SetReg(SISSR, 0x13, 0x31);
 		} else {		/* Dual 16/8 */
 			buswidth = 16;
-			outSISIDXREG(SISSR, 0x13, 0xb1);
-			outSISIDXREG(SISSR, 0x14, 0x41);
+			SiS_SetReg(SISSR, 0x13, 0xb1);
+			SiS_SetReg(SISSR, 0x14, 0x41);
 			sisfb_post_xgi_delay(ivideo, 1);
 			sr14 = 0x01;
 			if(sisfb_post_xgi_rwtest(ivideo, 22, 23, mapsize))
 				goto bail_out;
 
-			outSISIDXREG(SISSR, 0x13, 0x31);
-			outSISIDXREG(SISSR, 0x14, 0x31);
+			SiS_SetReg(SISSR, 0x13, 0x31);
+			SiS_SetReg(SISSR, 0x14, 0x31);
 			sisfb_post_xgi_delay(ivideo, 1);
 			if(sisfb_post_xgi_rwtest(ivideo, 22, 22, mapsize))
 				goto bail_out;
 
 			buswidth = 8;
-			outSISIDXREG(SISSR, 0x13, 0xb1);
-			outSISIDXREG(SISSR, 0x14, 0x30);
+			SiS_SetReg(SISSR, 0x13, 0xb1);
+			SiS_SetReg(SISSR, 0x14, 0x30);
 			sisfb_post_xgi_delay(ivideo, 1);
 			sr14 = 0x00;
 			if(sisfb_post_xgi_rwtest(ivideo, 21, 22, mapsize))
 				goto bail_out;
 			else
-				outSISIDXREG(SISSR, 0x13, 0x31);
+				SiS_SetReg(SISSR, 0x13, 0x31);
 		}
 
 	} else {	/* XGI_40 */
 
-		inSISIDXREG(SISCR, 0x97, reg);
+		reg = SiS_GetReg(SISCR, 0x97);
 		if(!(reg & 0x10)) {
-			inSISIDXREG(SISSR, 0x39, reg);
+			reg = SiS_GetReg(SISSR, 0x39);
 			reg >>= 1;
 		}
 
@@ -4762,52 +4747,52 @@ sisfb_post_xgi_ramsize(struct sis_video_info *ivideo)
 			buswidth = 32;
 			if(ivideo->revision_id == 2) {
 				channelab = 2;
-				outSISIDXREG(SISSR, 0x13, 0xa1);
-				outSISIDXREG(SISSR, 0x14, 0x44);
+				SiS_SetReg(SISSR, 0x13, 0xa1);
+				SiS_SetReg(SISSR, 0x14, 0x44);
 				sr14 = 0x04;
 				sisfb_post_xgi_delay(ivideo, 1);
 				if(sisfb_post_xgi_rwtest(ivideo, 23, 24, mapsize))
 					goto bail_out;
 
-				outSISIDXREG(SISSR, 0x13, 0x21);
-				outSISIDXREG(SISSR, 0x14, 0x34);
+				SiS_SetReg(SISSR, 0x13, 0x21);
+				SiS_SetReg(SISSR, 0x14, 0x34);
 				if(sisfb_post_xgi_rwtest(ivideo, 22, 23, mapsize))
 					goto bail_out;
 
 				channelab = 1;
-				outSISIDXREG(SISSR, 0x13, 0xa1);
-				outSISIDXREG(SISSR, 0x14, 0x40);
+				SiS_SetReg(SISSR, 0x13, 0xa1);
+				SiS_SetReg(SISSR, 0x14, 0x40);
 				sr14 = 0x00;
 				if(sisfb_post_xgi_rwtest(ivideo, 22, 23, mapsize))
 					goto bail_out;
 
-				outSISIDXREG(SISSR, 0x13, 0x21);
-				outSISIDXREG(SISSR, 0x14, 0x30);
+				SiS_SetReg(SISSR, 0x13, 0x21);
+				SiS_SetReg(SISSR, 0x14, 0x30);
 			} else {
 				channelab = 3;
-				outSISIDXREG(SISSR, 0x13, 0xa1);
-				outSISIDXREG(SISSR, 0x14, 0x4c);
+				SiS_SetReg(SISSR, 0x13, 0xa1);
+				SiS_SetReg(SISSR, 0x14, 0x4c);
 				sr14 = 0x0c;
 				sisfb_post_xgi_delay(ivideo, 1);
 				if(sisfb_post_xgi_rwtest(ivideo, 23, 25, mapsize))
 					goto bail_out;
 
 				channelab = 2;
-				outSISIDXREG(SISSR, 0x14, 0x48);
+				SiS_SetReg(SISSR, 0x14, 0x48);
 				sisfb_post_xgi_delay(ivideo, 1);
 				sr14 = 0x08;
 				if(sisfb_post_xgi_rwtest(ivideo, 23, 24, mapsize))
 					goto bail_out;
 
-				outSISIDXREG(SISSR, 0x13, 0x21);
-				outSISIDXREG(SISSR, 0x14, 0x3c);
+				SiS_SetReg(SISSR, 0x13, 0x21);
+				SiS_SetReg(SISSR, 0x14, 0x3c);
 				sr14 = 0x0c;
 
 				if(sisfb_post_xgi_rwtest(ivideo, 23, 24, mapsize)) {
 					channelab = 3;
 				} else {
 					channelab = 2;
-					outSISIDXREG(SISSR, 0x14, 0x38);
+					SiS_SetReg(SISSR, 0x14, 0x38);
 					sr14 = 0x08;
 				}
 			}
@@ -4818,26 +4803,26 @@ sisfb_post_xgi_ramsize(struct sis_video_info *ivideo)
 			buswidth = 64;
 			if(ivideo->revision_id == 2) {
 				channelab = 1;
-				outSISIDXREG(SISSR, 0x13, 0xa1);
-				outSISIDXREG(SISSR, 0x14, 0x52);
+				SiS_SetReg(SISSR, 0x13, 0xa1);
+				SiS_SetReg(SISSR, 0x14, 0x52);
 				sisfb_post_xgi_delay(ivideo, 1);
 				sr14 = 0x02;
 				if(sisfb_post_xgi_rwtest(ivideo, 23, 24, mapsize))
 					goto bail_out;
 
-				outSISIDXREG(SISSR, 0x13, 0x21);
-				outSISIDXREG(SISSR, 0x14, 0x42);
+				SiS_SetReg(SISSR, 0x13, 0x21);
+				SiS_SetReg(SISSR, 0x14, 0x42);
 			} else {
 				channelab = 2;
-				outSISIDXREG(SISSR, 0x13, 0xa1);
-				outSISIDXREG(SISSR, 0x14, 0x5a);
+				SiS_SetReg(SISSR, 0x13, 0xa1);
+				SiS_SetReg(SISSR, 0x14, 0x5a);
 				sisfb_post_xgi_delay(ivideo, 1);
 				sr14 = 0x0a;
 				if(sisfb_post_xgi_rwtest(ivideo, 24, 25, mapsize))
 					goto bail_out;
 
-				outSISIDXREG(SISSR, 0x13, 0x21);
-				outSISIDXREG(SISSR, 0x14, 0x4a);
+				SiS_SetReg(SISSR, 0x13, 0x21);
+				SiS_SetReg(SISSR, 0x14, 0x4a);
 			}
 			sisfb_post_xgi_delay(ivideo, 1);
 
@@ -4845,7 +4830,7 @@ sisfb_post_xgi_ramsize(struct sis_video_info *ivideo)
 	}
 
 bail_out:
-	setSISIDXREG(SISSR, 0x14, 0xf0, sr14);
+	SiS_SetRegANDOR(SISSR, 0x14, 0xf0, sr14);
 	sisfb_post_xgi_delay(ivideo, 1);
 
 	j = (ivideo->chip == XGI_20) ? 5 : 9;
@@ -4855,13 +4840,13 @@ bail_out:
 
 		reg = (ivideo->chip == XGI_20) ?
 				dramsr13[(i * 5) + 4] : dramsr13_4[(i * 5) + 4];
-		setSISIDXREG(SISSR, 0x13, 0x80, reg);
+		SiS_SetRegANDOR(SISSR, 0x13, 0x80, reg);
 		sisfb_post_xgi_delay(ivideo, 50);
 
 		ranksize = (ivideo->chip == XGI_20) ?
 				dramsr13[(i * 5) + 3] : dramsr13_4[(i * 5) + 3];
 
-		inSISIDXREG(SISSR, 0x13, reg);
+		reg = SiS_GetReg(SISSR, 0x13);
 		if(reg & 0x80) ranksize <<= 1;
 
 		if(ivideo->chip == XGI_20) {
@@ -4880,7 +4865,7 @@ bail_out:
 
 		if(!reg) continue;
 
-		setSISIDXREG(SISSR, 0x14, 0x0f, (reg & 0xf0));
+		SiS_SetRegANDOR(SISSR, 0x14, 0x0f, (reg & 0xf0));
 		sisfb_post_xgi_delay(ivideo, 1);
 
 		if(sisfb_post_xgi_rwtest(ivideo, j, ((reg >> 4) + channelab - 2 + 20), mapsize))
@@ -4925,9 +4910,9 @@ sisfb_post_xgi_setclocks(struct sis_video_info *ivideo, u8 regb)
 		v2 = ivideo->bios_abase[0x90 + index + 1];
 		v3 = ivideo->bios_abase[0x90 + index + 2];
 	}
-	outSISIDXREG(SISSR, 0x28, v1);
-	outSISIDXREG(SISSR, 0x29, v2);
-	outSISIDXREG(SISSR, 0x2a, v3);
+	SiS_SetReg(SISSR, 0x28, v1);
+	SiS_SetReg(SISSR, 0x29, v2);
+	SiS_SetReg(SISSR, 0x2a, v3);
 	sisfb_post_xgi_delay(ivideo, 0x43);
 	sisfb_post_xgi_delay(ivideo, 0x43);
 	sisfb_post_xgi_delay(ivideo, 0x43);
@@ -4938,9 +4923,9 @@ sisfb_post_xgi_setclocks(struct sis_video_info *ivideo, u8 regb)
 		v2 = ivideo->bios_abase[0xb8 + index + 1];
 		v3 = ivideo->bios_abase[0xb8 + index + 2];
 	}
-	outSISIDXREG(SISSR, 0x2e, v1);
-	outSISIDXREG(SISSR, 0x2f, v2);
-	outSISIDXREG(SISSR, 0x30, v3);
+	SiS_SetReg(SISSR, 0x2e, v1);
+	SiS_SetReg(SISSR, 0x2f, v2);
+	SiS_SetReg(SISSR, 0x30, v3);
 	sisfb_post_xgi_delay(ivideo, 0x43);
 	sisfb_post_xgi_delay(ivideo, 0x43);
 	sisfb_post_xgi_delay(ivideo, 0x43);
@@ -5013,29 +4998,29 @@ sisfb_post_xgi(struct pci_dev *pdev)
 	};
 
 	/* VGA enable */
-	reg = inSISREG(SISVGAENABLE) | 0x01;
-	outSISREG(SISVGAENABLE, reg);
+	reg = SiS_GetRegByte(SISVGAENABLE) | 0x01;
+	SiS_SetRegByte(SISVGAENABLE, reg);
 
 	/* Misc */
-	reg = inSISREG(SISMISCR) | 0x01;
-	outSISREG(SISMISCW, reg);
+	reg = SiS_GetRegByte(SISMISCR) | 0x01;
+	SiS_SetRegByte(SISMISCW, reg);
 
 	/* Unlock SR */
-	outSISIDXREG(SISSR, 0x05, 0x86);
-	inSISIDXREG(SISSR, 0x05, reg);
+	SiS_SetReg(SISSR, 0x05, 0x86);
+	reg = SiS_GetReg(SISSR, 0x05);
 	if(reg != 0xa1)
 		return 0;
 
 	/* Clear some regs */
 	for(i = 0; i < 0x22; i++) {
 		if(0x06 + i == 0x20) continue;
-		outSISIDXREG(SISSR, 0x06 + i, 0x00);
+		SiS_SetReg(SISSR, 0x06 + i, 0x00);
 	}
 	for(i = 0; i < 0x0b; i++) {
-		outSISIDXREG(SISSR, 0x31 + i, 0x00);
+		SiS_SetReg(SISSR, 0x31 + i, 0x00);
 	}
 	for(i = 0; i < 0x10; i++) {
-		outSISIDXREG(SISCR, 0x30 + i, 0x00);
+		SiS_SetReg(SISCR, 0x30 + i, 0x00);
 	}
 
 	ptr = cs78;
@@ -5043,7 +5028,7 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		ptr = (const u8 *)&bios[0x78];
 	}
 	for(i = 0; i < 3; i++) {
-		outSISIDXREG(SISSR, 0x23 + i, ptr[i]);
+		SiS_SetReg(SISSR, 0x23 + i, ptr[i]);
 	}
 
 	ptr = cs76;
@@ -5051,7 +5036,7 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		ptr = (const u8 *)&bios[0x76];
 	}
 	for(i = 0; i < 2; i++) {
-		outSISIDXREG(SISSR, 0x21 + i, ptr[i]);
+		SiS_SetReg(SISSR, 0x21 + i, ptr[i]);
 	}
 
 	v1 = 0x18; v2 = 0x00;
@@ -5059,83 +5044,83 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		v1 = bios[0x74];
 		v2 = bios[0x75];
 	}
-	outSISIDXREG(SISSR, 0x07, v1);
-	outSISIDXREG(SISSR, 0x11, 0x0f);
-	outSISIDXREG(SISSR, 0x1f, v2);
+	SiS_SetReg(SISSR, 0x07, v1);
+	SiS_SetReg(SISSR, 0x11, 0x0f);
+	SiS_SetReg(SISSR, 0x1f, v2);
 	/* PCI linear mode, RelIO enabled, A0000 decoding disabled */
-	outSISIDXREG(SISSR, 0x20, 0x80 | 0x20 | 0x04);
-	outSISIDXREG(SISSR, 0x27, 0x74);
+	SiS_SetReg(SISSR, 0x20, 0x80 | 0x20 | 0x04);
+	SiS_SetReg(SISSR, 0x27, 0x74);
 
 	ptr = cs7b;
 	if(ivideo->haveXGIROM) {
 		ptr = (const u8 *)&bios[0x7b];
 	}
 	for(i = 0; i < 3; i++) {
-		outSISIDXREG(SISSR, 0x31 + i, ptr[i]);
+		SiS_SetReg(SISSR, 0x31 + i, ptr[i]);
 	}
 
 	if(ivideo->chip == XGI_40) {
 		if(ivideo->revision_id == 2) {
-			setSISIDXREG(SISSR, 0x3b, 0x3f, 0xc0);
+			SiS_SetRegANDOR(SISSR, 0x3b, 0x3f, 0xc0);
 		}
-		outSISIDXREG(SISCR, 0x7d, 0xfe);
-		outSISIDXREG(SISCR, 0x7e, 0x0f);
+		SiS_SetReg(SISCR, 0x7d, 0xfe);
+		SiS_SetReg(SISCR, 0x7e, 0x0f);
 	}
 	if(ivideo->revision_id == 0) {	/* 40 *and* 20? */
-		andSISIDXREG(SISCR, 0x58, 0xd7);
-		inSISIDXREG(SISCR, 0xcb, reg);
+		SiS_SetRegAND(SISCR, 0x58, 0xd7);
+		reg = SiS_GetReg(SISCR, 0xcb);
 		if(reg & 0x20) {
-			setSISIDXREG(SISCR, 0x58, 0xd7, (reg & 0x10) ? 0x08 : 0x20); /* =0x28 Z7 ? */
+			SiS_SetRegANDOR(SISCR, 0x58, 0xd7, (reg & 0x10) ? 0x08 : 0x20); /* =0x28 Z7 ? */
 		}
 	}
 
 	reg = (ivideo->chip == XGI_40) ? 0x20 : 0x00;
-	setSISIDXREG(SISCR, 0x38, 0x1f, reg);
+	SiS_SetRegANDOR(SISCR, 0x38, 0x1f, reg);
 
 	if(ivideo->chip == XGI_20) {
-		outSISIDXREG(SISSR, 0x36, 0x70);
+		SiS_SetReg(SISSR, 0x36, 0x70);
 	} else {
-		outSISIDXREG(SISVID, 0x00, 0x86);
-		outSISIDXREG(SISVID, 0x32, 0x00);
-		outSISIDXREG(SISVID, 0x30, 0x00);
-		outSISIDXREG(SISVID, 0x32, 0x01);
-		outSISIDXREG(SISVID, 0x30, 0x00);
-		andSISIDXREG(SISVID, 0x2f, 0xdf);
-		andSISIDXREG(SISCAP, 0x00, 0x3f);
-
-		outSISIDXREG(SISPART1, 0x2f, 0x01);
-		outSISIDXREG(SISPART1, 0x00, 0x00);
-		outSISIDXREG(SISPART1, 0x02, bios[0x7e]);
-		outSISIDXREG(SISPART1, 0x2e, 0x08);
-		andSISIDXREG(SISPART1, 0x35, 0x7f);
-		andSISIDXREG(SISPART1, 0x50, 0xfe);
-
-		inSISIDXREG(SISPART4, 0x00, reg);
+		SiS_SetReg(SISVID, 0x00, 0x86);
+		SiS_SetReg(SISVID, 0x32, 0x00);
+		SiS_SetReg(SISVID, 0x30, 0x00);
+		SiS_SetReg(SISVID, 0x32, 0x01);
+		SiS_SetReg(SISVID, 0x30, 0x00);
+		SiS_SetRegAND(SISVID, 0x2f, 0xdf);
+		SiS_SetRegAND(SISCAP, 0x00, 0x3f);
+
+		SiS_SetReg(SISPART1, 0x2f, 0x01);
+		SiS_SetReg(SISPART1, 0x00, 0x00);
+		SiS_SetReg(SISPART1, 0x02, bios[0x7e]);
+		SiS_SetReg(SISPART1, 0x2e, 0x08);
+		SiS_SetRegAND(SISPART1, 0x35, 0x7f);
+		SiS_SetRegAND(SISPART1, 0x50, 0xfe);
+
+		reg = SiS_GetReg(SISPART4, 0x00);
 		if(reg == 1 || reg == 2) {
-			outSISIDXREG(SISPART2, 0x00, 0x1c);
-			outSISIDXREG(SISPART4, 0x0d, bios[0x7f]);
-			outSISIDXREG(SISPART4, 0x0e, bios[0x80]);
-			outSISIDXREG(SISPART4, 0x10, bios[0x81]);
-			andSISIDXREG(SISPART4, 0x0f, 0x3f);
+			SiS_SetReg(SISPART2, 0x00, 0x1c);
+			SiS_SetReg(SISPART4, 0x0d, bios[0x7f]);
+			SiS_SetReg(SISPART4, 0x0e, bios[0x80]);
+			SiS_SetReg(SISPART4, 0x10, bios[0x81]);
+			SiS_SetRegAND(SISPART4, 0x0f, 0x3f);
 
-			inSISIDXREG(SISPART4, 0x01, reg);
+			reg = SiS_GetReg(SISPART4, 0x01);
 			if((reg & 0xf0) >= 0xb0) {
-				inSISIDXREG(SISPART4, 0x23, reg);
+				reg = SiS_GetReg(SISPART4, 0x23);
 				if(reg & 0x20) reg |= 0x40;
-				outSISIDXREG(SISPART4, 0x23, reg);
+				SiS_SetReg(SISPART4, 0x23, reg);
 				reg = (reg & 0x20) ? 0x02 : 0x00;
-				setSISIDXREG(SISPART1, 0x1e, 0xfd, reg);
+				SiS_SetRegANDOR(SISPART1, 0x1e, 0xfd, reg);
 			}
 		}
 
 		v1 = bios[0x77];
 
-		inSISIDXREG(SISSR, 0x3b, reg);
+		reg = SiS_GetReg(SISSR, 0x3b);
 		if(reg & 0x02) {
-			inSISIDXREG(SISSR, 0x3a, reg);
+			reg = SiS_GetReg(SISSR, 0x3a);
 			v2 = (reg & 0x30) >> 3;
 			if(!(v2 & 0x04)) v2 ^= 0x02;
-			inSISIDXREG(SISSR, 0x39, reg);
+			reg = SiS_GetReg(SISSR, 0x39);
 			if(reg & 0x80) v2 |= 0x80;
 			v2 |= 0x01;
 
@@ -5168,36 +5153,36 @@ sisfb_post_xgi(struct pci_dev *pdev)
 					v2 |= 0x08;
 				}
 			}
-			setSISIDXREG(SISCR, 0x5f, 0xf0, v2);
+			SiS_SetRegANDOR(SISCR, 0x5f, 0xf0, v2);
 		}
-		outSISIDXREG(SISSR, 0x22, v1);
+		SiS_SetReg(SISSR, 0x22, v1);
 
 		if(ivideo->revision_id == 2) {
-			inSISIDXREG(SISSR, 0x3b, v1);
-			inSISIDXREG(SISSR, 0x3a, v2);
+			v1 = SiS_GetReg(SISSR, 0x3b);
+			v2 = SiS_GetReg(SISSR, 0x3a);
 			regd = bios[0x90 + 3] | (bios[0x90 + 4] << 8);
 			if( (!(v1 & 0x02)) && (v2 & 0x30) && (regd < 0xcf) )
-				setSISIDXREG(SISCR, 0x5f, 0xf1, 0x01);
+				SiS_SetRegANDOR(SISCR, 0x5f, 0xf1, 0x01);
 
 			if((mypdev = pci_get_device(0x10de, 0x01e0, NULL))) {
 				/* TODO: set CR5f &0xf1 | 0x01 for version 6570
 				 * of nforce 2 ROM
 				 */
 				if(0)
-					setSISIDXREG(SISCR, 0x5f, 0xf1, 0x01);
+					SiS_SetRegANDOR(SISCR, 0x5f, 0xf1, 0x01);
 				pci_dev_put(mypdev);
 			}
 		}
 
 		v1 = 0x30;
-		inSISIDXREG(SISSR, 0x3b, reg);
-		inSISIDXREG(SISCR, 0x5f, v2);
+		reg = SiS_GetReg(SISSR, 0x3b);
+		v2 = SiS_GetReg(SISCR, 0x5f);
 		if((!(reg & 0x02)) && (v2 & 0x0e))
 			v1 |= 0x08;
-		outSISIDXREG(SISSR, 0x27, v1);
+		SiS_SetReg(SISSR, 0x27, v1);
 
 		if(bios[0x64] & 0x01) {
-			setSISIDXREG(SISCR, 0x5f, 0xf0, bios[0x64]);
+			SiS_SetRegANDOR(SISCR, 0x5f, 0xf0, bios[0x64]);
 		}
 
 		v1 = bios[0x4f7];
@@ -5205,27 +5190,27 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		regd = (regd >> 20) & 0x0f;
 		if(regd == 1) {
 			v1 &= 0xfc;
-			orSISIDXREG(SISCR, 0x5f, 0x08);
-		}
-		outSISIDXREG(SISCR, 0x48, v1);
-
-		setSISIDXREG(SISCR, 0x47, 0x04, bios[0x4f6] & 0xfb);
-		setSISIDXREG(SISCR, 0x49, 0xf0, bios[0x4f8] & 0x0f);
-		setSISIDXREG(SISCR, 0x4a, 0x60, bios[0x4f9] & 0x9f);
-		setSISIDXREG(SISCR, 0x4b, 0x08, bios[0x4fa] & 0xf7);
-		setSISIDXREG(SISCR, 0x4c, 0x80, bios[0x4fb] & 0x7f);
-		outSISIDXREG(SISCR, 0x70, bios[0x4fc]);
-		setSISIDXREG(SISCR, 0x71, 0xf0, bios[0x4fd] & 0x0f);
-		outSISIDXREG(SISCR, 0x74, 0xd0);
-		setSISIDXREG(SISCR, 0x74, 0xcf, bios[0x4fe] & 0x30);
-		setSISIDXREG(SISCR, 0x75, 0xe0, bios[0x4ff] & 0x1f);
-		setSISIDXREG(SISCR, 0x76, 0xe0, bios[0x500] & 0x1f);
+			SiS_SetRegOR(SISCR, 0x5f, 0x08);
+		}
+		SiS_SetReg(SISCR, 0x48, v1);
+
+		SiS_SetRegANDOR(SISCR, 0x47, 0x04, bios[0x4f6] & 0xfb);
+		SiS_SetRegANDOR(SISCR, 0x49, 0xf0, bios[0x4f8] & 0x0f);
+		SiS_SetRegANDOR(SISCR, 0x4a, 0x60, bios[0x4f9] & 0x9f);
+		SiS_SetRegANDOR(SISCR, 0x4b, 0x08, bios[0x4fa] & 0xf7);
+		SiS_SetRegANDOR(SISCR, 0x4c, 0x80, bios[0x4fb] & 0x7f);
+		SiS_SetReg(SISCR, 0x70, bios[0x4fc]);
+		SiS_SetRegANDOR(SISCR, 0x71, 0xf0, bios[0x4fd] & 0x0f);
+		SiS_SetReg(SISCR, 0x74, 0xd0);
+		SiS_SetRegANDOR(SISCR, 0x74, 0xcf, bios[0x4fe] & 0x30);
+		SiS_SetRegANDOR(SISCR, 0x75, 0xe0, bios[0x4ff] & 0x1f);
+		SiS_SetRegANDOR(SISCR, 0x76, 0xe0, bios[0x500] & 0x1f);
 		v1 = bios[0x501];
 		if((mypdev = pci_get_device(0x8086, 0x2530, NULL))) {
 			v1 = 0xf0;
 			pci_dev_put(mypdev);
 		}
-		outSISIDXREG(SISCR, 0x77, v1);
+		SiS_SetReg(SISCR, 0x77, v1);
 	}
 
 	/* RAM type */
@@ -5236,14 +5221,14 @@ sisfb_post_xgi(struct pci_dev *pdev)
 	if(ivideo->haveXGIROM) {
 		v1 = bios[0x140 + regb];
 	}
-	outSISIDXREG(SISCR, 0x6d, v1);
+	SiS_SetReg(SISCR, 0x6d, v1);
 
 	ptr = cs128;
 	if(ivideo->haveXGIROM) {
 		ptr = (const u8 *)&bios[0x128];
 	}
 	for(i = 0, j = 0; i < 3; i++, j += 8) {
-		outSISIDXREG(SISCR, 0x68 + i, ptr[j + regb]);
+		SiS_SetReg(SISCR, 0x68 + i, ptr[j + regb]);
 	}
 
 	ptr  = cs31a;
@@ -5267,14 +5252,14 @@ sisfb_post_xgi(struct pci_dev *pdev)
 			if(regd & 0x01) reg |= 0x04;
 			if(regd & 0x02) reg |= 0x08;
 			regd >>= 2;
-			outSISIDXREG(SISCR, rega, reg);
-			inSISIDXREG(SISCR, rega, reg);
-			inSISIDXREG(SISCR, rega, reg);
+			SiS_SetReg(SISCR, rega, reg);
+			reg = SiS_GetReg(SISCR, rega);
+			reg = SiS_GetReg(SISCR, rega);
 			reg += 0x10;
 		}
 	}
 
-	andSISIDXREG(SISCR, 0x6e, 0xfc);
+	SiS_SetRegAND(SISCR, 0x6e, 0xfc);
 
 	ptr  = NULL;
 	if(ivideo->haveXGIROM) {
@@ -5282,7 +5267,7 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		ptr  = (const u8 *)&bios[index];
 	}
 	for(i = 0; i < 4; i++) {
-		setSISIDXREG(SISCR, 0x6e, 0xfc, i);
+		SiS_SetRegANDOR(SISCR, 0x6e, 0xfc, i);
 		reg = 0x00;
 		for(j = 0; j < 2; j++) {
 			regd = 0;
@@ -5296,9 +5281,9 @@ sisfb_post_xgi(struct pci_dev *pdev)
 				if(regd & 0x01) reg |= 0x01;
 				if(regd & 0x02) reg |= 0x02;
 				regd >>= 2;
-				outSISIDXREG(SISCR, 0x6f, reg);
-				inSISIDXREG(SISCR, 0x6f, reg);
-				inSISIDXREG(SISCR, 0x6f, reg);
+				SiS_SetReg(SISCR, 0x6f, reg);
+				reg = SiS_GetReg(SISCR, 0x6f);
+				reg = SiS_GetReg(SISCR, 0x6f);
 				reg += 0x08;
 			}
 		}
@@ -5309,10 +5294,10 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		ptr  = (const u8 *)&bios[0x148];
 	}
 	for(i = 0, j = 0; i < 2; i++, j += 8) {
-		outSISIDXREG(SISCR, 0x80 + i, ptr[j + regb]);
+		SiS_SetReg(SISCR, 0x80 + i, ptr[j + regb]);
 	}
 
-	andSISIDXREG(SISCR, 0x89, 0x8f);
+	SiS_SetRegAND(SISCR, 0x89, 0x8f);
 
 	ptr  = cs45a;
 	if(ivideo->haveXGIROM) {
@@ -5326,9 +5311,9 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		if(regd & 0x01) reg |= 0x01;
 		if(regd & 0x02) reg |= 0x02;
 		regd >>= 2;
-		outSISIDXREG(SISCR, 0x89, reg);
-		inSISIDXREG(SISCR, 0x89, reg);
-		inSISIDXREG(SISCR, 0x89, reg);
+		SiS_SetReg(SISCR, 0x89, reg);
+		reg = SiS_GetReg(SISCR, 0x89);
+		reg = SiS_GetReg(SISCR, 0x89);
 		reg += 0x10;
 	}
 
@@ -5339,27 +5324,27 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		v3 = bios[0x120 + regb];
 		v4 = bios[0x1ca];
 	}
-	outSISIDXREG(SISCR, 0x45, v1 & 0x0f);
-	outSISIDXREG(SISCR, 0x99, (v1 >> 4) & 0x07);
-	orSISIDXREG(SISCR, 0x40, v1 & 0x80);
-	outSISIDXREG(SISCR, 0x41, v2);
+	SiS_SetReg(SISCR, 0x45, v1 & 0x0f);
+	SiS_SetReg(SISCR, 0x99, (v1 >> 4) & 0x07);
+	SiS_SetRegOR(SISCR, 0x40, v1 & 0x80);
+	SiS_SetReg(SISCR, 0x41, v2);
 
 	ptr  = cs170;
 	if(ivideo->haveXGIROM) {
 		ptr  = (const u8 *)&bios[0x170];
 	}
 	for(i = 0, j = 0; i < 7; i++, j += 8) {
-		outSISIDXREG(SISCR, 0x90 + i, ptr[j + regb]);
+		SiS_SetReg(SISCR, 0x90 + i, ptr[j + regb]);
 	}
 
-	outSISIDXREG(SISCR, 0x59, v3);
+	SiS_SetReg(SISCR, 0x59, v3);
 
 	ptr  = cs1a8;
 	if(ivideo->haveXGIROM) {
 		ptr  = (const u8 *)&bios[0x1a8];
 	}
 	for(i = 0, j = 0; i < 3; i++, j += 8) {
-		outSISIDXREG(SISCR, 0xc3 + i, ptr[j + regb]);
+		SiS_SetReg(SISCR, 0xc3 + i, ptr[j + regb]);
 	}
 
 	ptr  = cs100;
@@ -5367,27 +5352,27 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		ptr  = (const u8 *)&bios[0x100];
 	}
 	for(i = 0, j = 0; i < 2; i++, j += 8) {
-		outSISIDXREG(SISCR, 0x8a + i, ptr[j + regb]);
+		SiS_SetReg(SISCR, 0x8a + i, ptr[j + regb]);
 	}
 
-	outSISIDXREG(SISCR, 0xcf, v4);
+	SiS_SetReg(SISCR, 0xcf, v4);
 
-	outSISIDXREG(SISCR, 0x83, 0x09);
-	outSISIDXREG(SISCR, 0x87, 0x00);
+	SiS_SetReg(SISCR, 0x83, 0x09);
+	SiS_SetReg(SISCR, 0x87, 0x00);
 
 	if(ivideo->chip == XGI_40) {
 		if( (ivideo->revision_id == 1) ||
 		    (ivideo->revision_id == 2) ) {
-			outSISIDXREG(SISCR, 0x8c, 0x87);
+			SiS_SetReg(SISCR, 0x8c, 0x87);
 		}
 	}
 
-	outSISIDXREG(SISSR, 0x17, 0x00);
-	outSISIDXREG(SISSR, 0x1a, 0x87);
+	SiS_SetReg(SISSR, 0x17, 0x00);
+	SiS_SetReg(SISSR, 0x1a, 0x87);
 
 	if(ivideo->chip == XGI_20) {
-		outSISIDXREG(SISSR, 0x15, 0x00);
-		outSISIDXREG(SISSR, 0x1c, 0x00);
+		SiS_SetReg(SISSR, 0x15, 0x00);
+		SiS_SetReg(SISSR, 0x1c, 0x00);
 	}
 
 	ramtype = 0x00; v1 = 0x10;
@@ -5397,16 +5382,16 @@ sisfb_post_xgi(struct pci_dev *pdev)
 	}
 	if(!(ramtype & 0x80)) {
 		if(ivideo->chip == XGI_20) {
-			outSISIDXREG(SISCR, 0x97, v1);
-			inSISIDXREG(SISCR, 0x97, reg);
+			SiS_SetReg(SISCR, 0x97, v1);
+			reg = SiS_GetReg(SISCR, 0x97);
 			if(reg & 0x10) {
 				ramtype = (reg & 0x01) << 1;
 			}
 		} else {
-			inSISIDXREG(SISSR, 0x39, reg);
+			reg = SiS_GetReg(SISSR, 0x39);
 			ramtype = reg & 0x02;
 			if(!(ramtype)) {
-				inSISIDXREG(SISSR, 0x3a, reg);
+				reg = SiS_GetReg(SISSR, 0x3a);
 				ramtype = (reg >> 1) & 0x01;
 			}
 		}
@@ -5427,55 +5412,55 @@ sisfb_post_xgi(struct pci_dev *pdev)
 				v2 = bios[regb + 0x160];
 				v3 = bios[regb + 0x168];
 			}
-			outSISIDXREG(SISCR, 0x82, v1);
-			outSISIDXREG(SISCR, 0x85, v2);
-			outSISIDXREG(SISCR, 0x86, v3);
+			SiS_SetReg(SISCR, 0x82, v1);
+			SiS_SetReg(SISCR, 0x85, v2);
+			SiS_SetReg(SISCR, 0x86, v3);
 		} else {
-			outSISIDXREG(SISCR, 0x82, 0x88);
-			outSISIDXREG(SISCR, 0x86, 0x00);
-			inSISIDXREG(SISCR, 0x86, reg);
-			outSISIDXREG(SISCR, 0x86, 0x88);
-			inSISIDXREG(SISCR, 0x86, reg);
-			outSISIDXREG(SISCR, 0x86, bios[regb + 0x168]);
-			outSISIDXREG(SISCR, 0x82, 0x77);
-			outSISIDXREG(SISCR, 0x85, 0x00);
-			inSISIDXREG(SISCR, 0x85, reg);
-			outSISIDXREG(SISCR, 0x85, 0x88);
-			inSISIDXREG(SISCR, 0x85, reg);
-			outSISIDXREG(SISCR, 0x85, bios[regb + 0x160]);
-			outSISIDXREG(SISCR, 0x82, bios[regb + 0x158]);
+			SiS_SetReg(SISCR, 0x82, 0x88);
+			SiS_SetReg(SISCR, 0x86, 0x00);
+			reg = SiS_GetReg(SISCR, 0x86);
+			SiS_SetReg(SISCR, 0x86, 0x88);
+			reg = SiS_GetReg(SISCR, 0x86);
+			SiS_SetReg(SISCR, 0x86, bios[regb + 0x168]);
+			SiS_SetReg(SISCR, 0x82, 0x77);
+			SiS_SetReg(SISCR, 0x85, 0x00);
+			reg = SiS_GetReg(SISCR, 0x85);
+			SiS_SetReg(SISCR, 0x85, 0x88);
+			reg = SiS_GetReg(SISCR, 0x85);
+			SiS_SetReg(SISCR, 0x85, bios[regb + 0x160]);
+			SiS_SetReg(SISCR, 0x82, bios[regb + 0x158]);
 		}
 		if(ivideo->chip == XGI_40) {
-			outSISIDXREG(SISCR, 0x97, 0x00);
+			SiS_SetReg(SISCR, 0x97, 0x00);
 		}
-		outSISIDXREG(SISCR, 0x98, 0x01);
-		outSISIDXREG(SISCR, 0x9a, 0x02);
+		SiS_SetReg(SISCR, 0x98, 0x01);
+		SiS_SetReg(SISCR, 0x9a, 0x02);
 
-		outSISIDXREG(SISSR, 0x18, 0x01);
+		SiS_SetReg(SISSR, 0x18, 0x01);
 		if((ivideo->chip == XGI_20) ||
 		   (ivideo->revision_id == 2)) {
-			outSISIDXREG(SISSR, 0x19, 0x40);
+			SiS_SetReg(SISSR, 0x19, 0x40);
 		} else {
-			outSISIDXREG(SISSR, 0x19, 0x20);
+			SiS_SetReg(SISSR, 0x19, 0x20);
 		}
-		outSISIDXREG(SISSR, 0x16, 0x00);
-		outSISIDXREG(SISSR, 0x16, 0x80);
+		SiS_SetReg(SISSR, 0x16, 0x00);
+		SiS_SetReg(SISSR, 0x16, 0x80);
 		if((ivideo->chip == XGI_20) || (bios[0x1cb] != 0x0c)) {
 			sisfb_post_xgi_delay(ivideo, 0x43);
 			sisfb_post_xgi_delay(ivideo, 0x43);
 			sisfb_post_xgi_delay(ivideo, 0x43);
-			outSISIDXREG(SISSR, 0x18, 0x00);
+			SiS_SetReg(SISSR, 0x18, 0x00);
 			if((ivideo->chip == XGI_20) ||
 			   (ivideo->revision_id == 2)) {
-				outSISIDXREG(SISSR, 0x19, 0x40);
+				SiS_SetReg(SISSR, 0x19, 0x40);
 			} else {
-				outSISIDXREG(SISSR, 0x19, 0x20);
+				SiS_SetReg(SISSR, 0x19, 0x20);
 			}
 		} else if((ivideo->chip == XGI_40) && (bios[0x1cb] == 0x0c)) {
-			/* outSISIDXREG(SISSR, 0x16, 0x0c); */ /* ? */
+			/* SiS_SetReg(SISSR, 0x16, 0x0c); */ /* ? */
 		}
-		outSISIDXREG(SISSR, 0x16, 0x00);
-		outSISIDXREG(SISSR, 0x16, 0x80);
+		SiS_SetReg(SISSR, 0x16, 0x00);
+		SiS_SetReg(SISSR, 0x16, 0x80);
 		sisfb_post_xgi_delay(ivideo, 4);
 		v1 = 0x31; v2 = 0x03; v3 = 0x83; v4 = 0x03; v5 = 0x83;
 		if(ivideo->haveXGIROM) {
@@ -5486,74 +5471,74 @@ sisfb_post_xgi(struct pci_dev *pdev)
 			v4 = bios[index + 2];
 			v5 = bios[index + 3];
 		}
-		outSISIDXREG(SISSR, 0x18, v1);
-		outSISIDXREG(SISSR, 0x19, ((ivideo->chip == XGI_20) ? 0x02 : 0x01));
-		outSISIDXREG(SISSR, 0x16, v2);
-		outSISIDXREG(SISSR, 0x16, v3);
+		SiS_SetReg(SISSR, 0x18, v1);
+		SiS_SetReg(SISSR, 0x19, ((ivideo->chip == XGI_20) ? 0x02 : 0x01));
+		SiS_SetReg(SISSR, 0x16, v2);
+		SiS_SetReg(SISSR, 0x16, v3);
 		sisfb_post_xgi_delay(ivideo, 0x43);
-		outSISIDXREG(SISSR, 0x1b, 0x03);
+		SiS_SetReg(SISSR, 0x1b, 0x03);
 		sisfb_post_xgi_delay(ivideo, 0x22);
-		outSISIDXREG(SISSR, 0x18, v1);
-		outSISIDXREG(SISSR, 0x19, 0x00);
-		outSISIDXREG(SISSR, 0x16, v4);
-		outSISIDXREG(SISSR, 0x16, v5);
-		outSISIDXREG(SISSR, 0x1b, 0x00);
+		SiS_SetReg(SISSR, 0x18, v1);
+		SiS_SetReg(SISSR, 0x19, 0x00);
+		SiS_SetReg(SISSR, 0x16, v4);
+		SiS_SetReg(SISSR, 0x16, v5);
+		SiS_SetReg(SISSR, 0x1b, 0x00);
 		break;
 	case 1:
-		outSISIDXREG(SISCR, 0x82, 0x77);
-		outSISIDXREG(SISCR, 0x86, 0x00);
-		inSISIDXREG(SISCR, 0x86, reg);
-		outSISIDXREG(SISCR, 0x86, 0x88);
-		inSISIDXREG(SISCR, 0x86, reg);
+		SiS_SetReg(SISCR, 0x82, 0x77);
+		SiS_SetReg(SISCR, 0x86, 0x00);
+		reg = SiS_GetReg(SISCR, 0x86);
+		SiS_SetReg(SISCR, 0x86, 0x88);
+		reg = SiS_GetReg(SISCR, 0x86);
 		v1 = cs168[regb]; v2 = cs160[regb]; v3 = cs158[regb];
 		if(ivideo->haveXGIROM) {
 			v1 = bios[regb + 0x168];
 			v2 = bios[regb + 0x160];
 			v3 = bios[regb + 0x158];
 		}
-		outSISIDXREG(SISCR, 0x86, v1);
-		outSISIDXREG(SISCR, 0x82, 0x77);
-		outSISIDXREG(SISCR, 0x85, 0x00);
-		inSISIDXREG(SISCR, 0x85, reg);
-		outSISIDXREG(SISCR, 0x85, 0x88);
-		inSISIDXREG(SISCR, 0x85, reg);
-		outSISIDXREG(SISCR, 0x85, v2);
-		outSISIDXREG(SISCR, 0x82, v3);
-		outSISIDXREG(SISCR, 0x98, 0x01);
-		outSISIDXREG(SISCR, 0x9a, 0x02);
-
-		outSISIDXREG(SISSR, 0x28, 0x64);
-		outSISIDXREG(SISSR, 0x29, 0x63);
+		SiS_SetReg(SISCR, 0x86, v1);
+		SiS_SetReg(SISCR, 0x82, 0x77);
+		SiS_SetReg(SISCR, 0x85, 0x00);
+		reg = SiS_GetReg(SISCR, 0x85);
+		SiS_SetReg(SISCR, 0x85, 0x88);
+		reg = SiS_GetReg(SISCR, 0x85);
+		SiS_SetReg(SISCR, 0x85, v2);
+		SiS_SetReg(SISCR, 0x82, v3);
+		SiS_SetReg(SISCR, 0x98, 0x01);
+		SiS_SetReg(SISCR, 0x9a, 0x02);
+
+		SiS_SetReg(SISSR, 0x28, 0x64);
+		SiS_SetReg(SISSR, 0x29, 0x63);
 		sisfb_post_xgi_delay(ivideo, 15);
-		outSISIDXREG(SISSR, 0x18, 0x00);
-		outSISIDXREG(SISSR, 0x19, 0x20);
-		outSISIDXREG(SISSR, 0x16, 0x00);
-		outSISIDXREG(SISSR, 0x16, 0x80);
-		outSISIDXREG(SISSR, 0x18, 0xc5);
-		outSISIDXREG(SISSR, 0x19, 0x23);
-		outSISIDXREG(SISSR, 0x16, 0x00);
-		outSISIDXREG(SISSR, 0x16, 0x80);
+		SiS_SetReg(SISSR, 0x18, 0x00);
+		SiS_SetReg(SISSR, 0x19, 0x20);
+		SiS_SetReg(SISSR, 0x16, 0x00);
+		SiS_SetReg(SISSR, 0x16, 0x80);
+		SiS_SetReg(SISSR, 0x18, 0xc5);
+		SiS_SetReg(SISSR, 0x19, 0x23);
+		SiS_SetReg(SISSR, 0x16, 0x00);
+		SiS_SetReg(SISSR, 0x16, 0x80);
 		sisfb_post_xgi_delay(ivideo, 1);
-		outSISIDXREG(SISCR, 0x97,0x11);
+		SiS_SetReg(SISCR, 0x97, 0x11);
 		sisfb_post_xgi_setclocks(ivideo, regb);
 		sisfb_post_xgi_delay(ivideo, 0x46);
-		outSISIDXREG(SISSR, 0x18, 0xc5);
-		outSISIDXREG(SISSR, 0x19, 0x23);
-		outSISIDXREG(SISSR, 0x16, 0x00);
-		outSISIDXREG(SISSR, 0x16, 0x80);
+		SiS_SetReg(SISSR, 0x18, 0xc5);
+		SiS_SetReg(SISSR, 0x19, 0x23);
+		SiS_SetReg(SISSR, 0x16, 0x00);
+		SiS_SetReg(SISSR, 0x16, 0x80);
 		sisfb_post_xgi_delay(ivideo, 1);
-		outSISIDXREG(SISSR, 0x1b, 0x04);
+		SiS_SetReg(SISSR, 0x1b, 0x04);
 		sisfb_post_xgi_delay(ivideo, 1);
-		outSISIDXREG(SISSR, 0x1b, 0x00);
+		SiS_SetReg(SISSR, 0x1b, 0x00);
 		sisfb_post_xgi_delay(ivideo, 1);
 		v1 = 0x31;
 		if(ivideo->haveXGIROM) {
 			v1 = bios[0xf0];
 		}
-		outSISIDXREG(SISSR, 0x18, v1);
-		outSISIDXREG(SISSR, 0x19, 0x06);
-		outSISIDXREG(SISSR, 0x16, 0x04);
-		outSISIDXREG(SISSR, 0x16, 0x84);
+		SiS_SetReg(SISSR, 0x18, v1);
+		SiS_SetReg(SISSR, 0x19, 0x06);
+		SiS_SetReg(SISSR, 0x16, 0x04);
+		SiS_SetReg(SISSR, 0x16, 0x84);
 		sisfb_post_xgi_delay(ivideo, 1);
 		break;
 	default:
@@ -5561,85 +5546,85 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		if((ivideo->chip == XGI_40) &&
 		   ((ivideo->revision_id == 1) ||
 		    (ivideo->revision_id == 2))) {
-			outSISIDXREG(SISCR, 0x82, bios[regb + 0x158]);
-			outSISIDXREG(SISCR, 0x85, bios[regb + 0x160]);
-			outSISIDXREG(SISCR, 0x86, bios[regb + 0x168]);
+			SiS_SetReg(SISCR, 0x82, bios[regb + 0x158]);
+			SiS_SetReg(SISCR, 0x85, bios[regb + 0x160]);
+			SiS_SetReg(SISCR, 0x86, bios[regb + 0x168]);
 		} else {
-			outSISIDXREG(SISCR, 0x82, 0x88);
-			outSISIDXREG(SISCR, 0x86, 0x00);
-			inSISIDXREG(SISCR, 0x86, reg);
-			outSISIDXREG(SISCR, 0x86, 0x88);
-			outSISIDXREG(SISCR, 0x82, 0x77);
-			outSISIDXREG(SISCR, 0x85, 0x00);
-			inSISIDXREG(SISCR, 0x85, reg);
-			outSISIDXREG(SISCR, 0x85, 0x88);
-			inSISIDXREG(SISCR, 0x85, reg);
+			SiS_SetReg(SISCR, 0x82, 0x88);
+			SiS_SetReg(SISCR, 0x86, 0x00);
+			reg = SiS_GetReg(SISCR, 0x86);
+			SiS_SetReg(SISCR, 0x86, 0x88);
+			SiS_SetReg(SISCR, 0x82, 0x77);
+			SiS_SetReg(SISCR, 0x85, 0x00);
+			reg = SiS_GetReg(SISCR, 0x85);
+			SiS_SetReg(SISCR, 0x85, 0x88);
+			reg = SiS_GetReg(SISCR, 0x85);
 			v1 = cs160[regb]; v2 = cs158[regb];
 			if(ivideo->haveXGIROM) {
 				v1 = bios[regb + 0x160];
 				v2 = bios[regb + 0x158];
 			}
-			outSISIDXREG(SISCR, 0x85, v1);
-			outSISIDXREG(SISCR, 0x82, v2);
+			SiS_SetReg(SISCR, 0x85, v1);
+			SiS_SetReg(SISCR, 0x82, v2);
 		}
 		if(ivideo->chip == XGI_40) {
-			outSISIDXREG(SISCR, 0x97, 0x11);
+			SiS_SetReg(SISCR, 0x97, 0x11);
 		}
 		if((ivideo->chip == XGI_40) && (ivideo->revision_id == 2)) {
-			outSISIDXREG(SISCR, 0x98, 0x01);
+			SiS_SetReg(SISCR, 0x98, 0x01);
 		} else {
-			outSISIDXREG(SISCR, 0x98, 0x03);
+			SiS_SetReg(SISCR, 0x98, 0x03);
 		}
-		outSISIDXREG(SISCR, 0x9a, 0x02);
+		SiS_SetReg(SISCR, 0x9a, 0x02);
 
 		if(ivideo->chip == XGI_40) {
-			outSISIDXREG(SISSR, 0x18, 0x01);
+			SiS_SetReg(SISSR, 0x18, 0x01);
 		} else {
-			outSISIDXREG(SISSR, 0x18, 0x00);
+			SiS_SetReg(SISSR, 0x18, 0x00);
 		}
-		outSISIDXREG(SISSR, 0x19, 0x40);
-		outSISIDXREG(SISSR, 0x16, 0x00);
-		outSISIDXREG(SISSR, 0x16, 0x80);
+		SiS_SetReg(SISSR, 0x19, 0x40);
+		SiS_SetReg(SISSR, 0x16, 0x00);
+		SiS_SetReg(SISSR, 0x16, 0x80);
 		if((ivideo->chip == XGI_40) && (bios[0x1cb] != 0x0c)) {
 			sisfb_post_xgi_delay(ivideo, 0x43);
 			sisfb_post_xgi_delay(ivideo, 0x43);
 			sisfb_post_xgi_delay(ivideo, 0x43);
-			outSISIDXREG(SISSR, 0x18, 0x00);
-			outSISIDXREG(SISSR, 0x19, 0x40);
-			outSISIDXREG(SISSR, 0x16, 0x00);
-			outSISIDXREG(SISSR, 0x16, 0x80);
+			SiS_SetReg(SISSR, 0x18, 0x00);
+			SiS_SetReg(SISSR, 0x19, 0x40);
+			SiS_SetReg(SISSR, 0x16, 0x00);
+			SiS_SetReg(SISSR, 0x16, 0x80);
 		}
 		sisfb_post_xgi_delay(ivideo, 4);
 		v1 = 0x31;
 		if(ivideo->haveXGIROM) {
 			v1 = bios[0xf0];
 		}
-		outSISIDXREG(SISSR, 0x18, v1);
-		outSISIDXREG(SISSR, 0x19, 0x01);
+		SiS_SetReg(SISSR, 0x18, v1);
+		SiS_SetReg(SISSR, 0x19, 0x01);
 		if(ivideo->chip == XGI_40) {
-			outSISIDXREG(SISSR, 0x16, bios[0x53e]);
-			outSISIDXREG(SISSR, 0x16, bios[0x53f]);
+			SiS_SetReg(SISSR, 0x16, bios[0x53e]);
+			SiS_SetReg(SISSR, 0x16, bios[0x53f]);
 		} else {
-			outSISIDXREG(SISSR, 0x16, 0x05);
-			outSISIDXREG(SISSR, 0x16, 0x85);
+			SiS_SetReg(SISSR, 0x16, 0x05);
+			SiS_SetReg(SISSR, 0x16, 0x85);
 		}
 		sisfb_post_xgi_delay(ivideo, 0x43);
 		if(ivideo->chip == XGI_40) {
-			outSISIDXREG(SISSR, 0x1b, 0x01);
+			SiS_SetReg(SISSR, 0x1b, 0x01);
 		} else {
-			outSISIDXREG(SISSR, 0x1b, 0x03);
+			SiS_SetReg(SISSR, 0x1b, 0x03);
 		}
 		sisfb_post_xgi_delay(ivideo, 0x22);
-		outSISIDXREG(SISSR, 0x18, v1);
-		outSISIDXREG(SISSR, 0x19, 0x00);
+		SiS_SetReg(SISSR, 0x18, v1);
+		SiS_SetReg(SISSR, 0x19, 0x00);
 		if(ivideo->chip == XGI_40) {
-			outSISIDXREG(SISSR, 0x16, bios[0x540]);
-			outSISIDXREG(SISSR, 0x16, bios[0x541]);
+			SiS_SetReg(SISSR, 0x16, bios[0x540]);
+			SiS_SetReg(SISSR, 0x16, bios[0x541]);
 		} else {
-			outSISIDXREG(SISSR, 0x16, 0x05);
-			outSISIDXREG(SISSR, 0x16, 0x85);
+			SiS_SetReg(SISSR, 0x16, 0x05);
+			SiS_SetReg(SISSR, 0x16, 0x85);
 		}
-		outSISIDXREG(SISSR, 0x1b, 0x00);
+		SiS_SetReg(SISSR, 0x1b, 0x00);
 	}
 
 	regb = 0;	/* ! */
@@ -5647,7 +5632,7 @@ sisfb_post_xgi(struct pci_dev *pdev)
 	if(ivideo->haveXGIROM) {
 		v1 = bios[0x110 + regb];
 	}
-	outSISIDXREG(SISSR, 0x1b, v1);
+	SiS_SetReg(SISSR, 0x1b, v1);
 
 	/* RAM size */
 	v1 = 0x00; v2 = 0x00;
@@ -5659,8 +5644,8 @@ sisfb_post_xgi(struct pci_dev *pdev)
 	regd = 1 << regb;
 	if((v1 & 0x40) && (v2 & regd) && ivideo->haveXGIROM) {
 
-		outSISIDXREG(SISSR, 0x13, bios[regb + 0xe0]);
-		outSISIDXREG(SISSR, 0x14, bios[regb + 0xe0 + 8]);
+		SiS_SetReg(SISSR, 0x13, bios[regb + 0xe0]);
+		SiS_SetReg(SISSR, 0x14, bios[regb + 0xe0 + 8]);
 
 	} else {
 
@@ -5672,24 +5657,24 @@ sisfb_post_xgi(struct pci_dev *pdev)
 		ivideo->SiS_Pr.VideoMemorySize = 8 << 20;
 		SiSSetMode(&ivideo->SiS_Pr, 0x2e | 0x80);
 
-		outSISIDXREG(SISSR, 0x05, 0x86);
+		SiS_SetReg(SISSR, 0x05, 0x86);
 
 		/* Disable read-cache */
-		andSISIDXREG(SISSR, 0x21, 0xdf);
+		SiS_SetRegAND(SISSR, 0x21, 0xdf);
 		sisfb_post_xgi_ramsize(ivideo);
 		/* Enable read-cache */
-		orSISIDXREG(SISSR, 0x21, 0x20);
+		SiS_SetRegOR(SISSR, 0x21, 0x20);
 
 	}
 
 #if 0
 	printk(KERN_DEBUG "-----------------\n");
 	for(i = 0; i < 0xff; i++) {
-		inSISIDXREG(SISCR, i, reg);
+		reg = SiS_GetReg(SISCR, i);
 		printk(KERN_DEBUG "CR%02x(%x) = 0x%02x\n", i, SISCR, reg);
 	}
 	for(i = 0; i < 0x40; i++) {
-		inSISIDXREG(SISSR, i, reg);
+		reg = SiS_GetReg(SISSR, i);
 		printk(KERN_DEBUG "SR%02x(%x) = 0x%02x\n", i, SISSR, reg);
 	}
 	printk(KERN_DEBUG "-----------------\n");
@@ -5697,13 +5682,13 @@ sisfb_post_xgi(struct pci_dev *pdev)
 
 	/* Sense CRT1 */
 	if(ivideo->chip == XGI_20) {
-		orSISIDXREG(SISCR, 0x32, 0x20);
+		SiS_SetRegOR(SISCR, 0x32, 0x20);
 	} else {
-		inSISIDXREG(SISPART4, 0x00, reg);
+		reg = SiS_GetReg(SISPART4, 0x00);
 		if((reg == 1) || (reg == 2)) {
 			sisfb_sense_crt1(ivideo);
 		} else {
-			orSISIDXREG(SISCR, 0x32, 0x20);
+			SiS_SetRegOR(SISCR, 0x32, 0x20);
 		}
 	}
 
@@ -5714,20 +5699,20 @@ sisfb_post_xgi(struct pci_dev *pdev)
 	ivideo->curFSTN = ivideo->curDSTN = 0;
 	SiSSetMode(&ivideo->SiS_Pr, 0x2e | 0x80);
 
-	outSISIDXREG(SISSR, 0x05, 0x86);
+	SiS_SetReg(SISSR, 0x05, 0x86);
 
 	/* Display off */
-	orSISIDXREG(SISSR, 0x01, 0x20);
+	SiS_SetRegOR(SISSR, 0x01, 0x20);
 
 	/* Save mode number in CR34 */
-	outSISIDXREG(SISCR, 0x34, 0x2e);
+	SiS_SetReg(SISCR, 0x34, 0x2e);
 
 	/* Let everyone know what the current mode is */
 	ivideo->modeprechange = 0x2e;
 
 	if(ivideo->chip == XGI_40) {
-		inSISIDXREG(SISCR, 0xca, reg);
-		inSISIDXREG(SISCR, 0xcc, v1);
+		reg = SiS_GetReg(SISCR, 0xca);
+		v1 = SiS_GetReg(SISCR, 0xcc);
 		if((reg & 0x10) && (!(v1 & 0x04))) {
 			printk(KERN_ERR
 				"sisfb: Please connect power to the card.\n");
@@ -5936,6 +5921,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	ivideo->video_base = pci_resource_start(pdev, 0);
+	ivideo->video_size = pci_resource_len(pdev, 0);
 	ivideo->mmio_base  = pci_resource_start(pdev, 1);
 	ivideo->mmio_size  = pci_resource_len(pdev, 1);
 	ivideo->SiS_Pr.RelIO = pci_resource_start(pdev, 2) + 0x30;
@@ -5969,7 +5955,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 #endif
 
-	outSISIDXREG(SISSR, 0x05, 0x86);
+	SiS_SetReg(SISSR, 0x05, 0x86);
 
 	if( (!ivideo->sisvga_enabled)
 #if !defined(__i386__) && !defined(__x86_64__)
@@ -5977,13 +5963,13 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 #endif
 						   ) {
 		for(i = 0x30; i <= 0x3f; i++) {
-			outSISIDXREG(SISCR, i, 0x00);
+			SiS_SetReg(SISCR, i, 0x00);
 		}
 	}
 
 	/* Find out about current video mode */
 	ivideo->modeprechange = 0x03;
-	inSISIDXREG(SISCR, 0x34, reg);
+	reg = SiS_GetReg(SISCR, 0x34);
 	if(reg & 0x7f) {
 		ivideo->modeprechange = reg & 0x7f;
 	} else if(ivideo->sisvga_enabled) {
@@ -6080,9 +6066,9 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if((ivideo->sisfb_mode_idx < 0) ||
 	   ((sisbios_mode[ivideo->sisfb_mode_idx].mode_no[ivideo->mni]) != 0xFF)) {
 		/* Enable PCI_LINEAR_ADDRESSING and MMIO_ENABLE  */
-		orSISIDXREG(SISSR, IND_SIS_PCI_ADDRESS_SET, (SIS_PCI_ADDR_ENABLE | SIS_MEM_MAP_IO_ENABLE));
+		SiS_SetRegOR(SISSR, IND_SIS_PCI_ADDRESS_SET, (SIS_PCI_ADDR_ENABLE | SIS_MEM_MAP_IO_ENABLE));
 		/* Enable 2D accelerator engine */
-		orSISIDXREG(SISSR, IND_SIS_MODULE_ENABLE, SIS_ENABLE_2D);
+		SiS_SetRegOR(SISSR, IND_SIS_MODULE_ENABLE, SIS_ENABLE_2D);
 	}
 
 	if(sisfb_pdc != 0xff) {
diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/sis/vgatypes.h
index 81a22eaabfd..12c0dfaf251 100644
--- a/drivers/video/sis/vgatypes.h
+++ b/drivers/video/sis/vgatypes.h
@@ -55,21 +55,10 @@
 
 #define SISIOMEMTYPE
 
-#ifdef SIS_LINUX_KERNEL
 typedef unsigned long SISIOADDRESS;
 #include <linux/types.h>  /* Need __iomem */
 #undef SISIOMEMTYPE
 #define SISIOMEMTYPE __iomem
-#endif
-
-#ifdef SIS_XORG_XF86
-#if XF86_VERSION_CURRENT < XF86_VERSION_NUMERIC(4,2,0,0,0)
-typedef unsigned long IOADDRESS;
-typedef unsigned long SISIOADDRESS;
-#else
-typedef IOADDRESS SISIOADDRESS;
-#endif
-#endif
 
 typedef enum _SIS_CHIP_TYPE {
     SIS_VGALegacy = 0,
diff --git a/drivers/video/sis/vstruct.h b/drivers/video/sis/vstruct.h
index bef4aae388d..ea94d214dcf 100644
--- a/drivers/video/sis/vstruct.h
+++ b/drivers/video/sis/vstruct.h
@@ -233,24 +233,15 @@ struct SiS_Private
 {
 	unsigned char			ChipType;
 	unsigned char			ChipRevision;
-#ifdef SIS_XORG_XF86
-	PCITAG				PciTag;
-#endif
-#ifdef SIS_LINUX_KERNEL
 	void				*ivideo;
-#endif
 	unsigned char 			*VirtualRomBase;
 	bool				UseROM;
-#ifdef SIS_LINUX_KERNEL
 	unsigned char SISIOMEMTYPE	*VideoMemoryAddress;
 	unsigned int			VideoMemorySize;
-#endif
 	SISIOADDRESS			IOAddress;
 	SISIOADDRESS			IOAddress2;  /* For dual chip XGI volari */
 
-#ifdef SIS_LINUX_KERNEL
 	SISIOADDRESS			RelIO;
-#endif
 	SISIOADDRESS			SiS_P3c4;
 	SISIOADDRESS			SiS_P3d4;
 	SISIOADDRESS			SiS_P3c0;
@@ -280,9 +271,6 @@ struct SiS_Private
 	unsigned short			SiS_IF_DEF_FSTN;
 	unsigned short			SiS_SysFlags;
 	unsigned char			SiS_VGAINFO;
-#ifdef SIS_XORG_XF86
-	unsigned short			SiS_CP1, SiS_CP2, SiS_CP3, SiS_CP4;
-#endif
 	bool				SiS_UseROM;
 	bool				SiS_ROMNew;
 	bool				SiS_XGIROM;
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/video/udlfb.c
index 5969e848d29..020589a6bf0 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -16,6 +16,8 @@
  * from Florian Echtler, Henrik Bjerregaard Pedersen, and others.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -26,8 +28,8 @@
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
-
-#include "udlfb.h"
+#include <video/udlfb.h>
+#include "edid.h"
 
 static struct fb_fix_screeninfo dlfb_fix = {
 	.id =           "udlfb",
@@ -40,9 +42,7 @@ static struct fb_fix_screeninfo dlfb_fix = {
 };
 
 static const u32 udlfb_info_flags = FBINFO_DEFAULT | FBINFO_READS_FAST |
-#ifdef FBINFO_VIRTFB
 		FBINFO_VIRTFB |
-#endif
 		FBINFO_HWACCEL_IMAGEBLIT | FBINFO_HWACCEL_FILLRECT |
 		FBINFO_HWACCEL_COPYAREA | FBINFO_MISC_ALWAYS_SETPAR;
 
@@ -293,7 +293,7 @@ static int dlfb_ops_mmap(struct fb_info *info, struct vm_area_struct *vma)
 
 	pos = (unsigned long)info->fix.smem_start + offset;
 
-	dl_notice("mmap() framebuffer addr:%lu size:%lu\n",
+	pr_notice("mmap() framebuffer addr:%lu size:%lu\n",
 		  pos, size);
 
 	while (size > 0) {
@@ -595,18 +595,6 @@ error:
 	return 0;
 }
 
-static ssize_t dlfb_ops_read(struct fb_info *info, char __user *buf,
-			 size_t count, loff_t *ppos)
-{
-	ssize_t result = -ENOSYS;
-
-#if defined CONFIG_FB_SYS_FOPS || defined CONFIG_FB_SYS_FOPS_MODULE
-	result = fb_sys_read(info, buf, count, ppos);
-#endif
-
-	return result;
-}
-
 /*
  * Path triggered by usermode clients who write to filesystem
  * e.g. cat filename > /dev/fb1
@@ -616,12 +604,10 @@ static ssize_t dlfb_ops_read(struct fb_info *info, char __user *buf,
 static ssize_t dlfb_ops_write(struct fb_info *info, const char __user *buf,
 			  size_t count, loff_t *ppos)
 {
-	ssize_t result = -ENOSYS;
+	ssize_t result;
 	struct dlfb_data *dev = info->par;
 	u32 offset = (u32) *ppos;
 
-#if defined CONFIG_FB_SYS_FOPS || defined CONFIG_FB_SYS_FOPS_MODULE
-
 	result = fb_sys_write(info, buf, count, ppos);
 
 	if (result > 0) {
@@ -632,7 +618,6 @@ static ssize_t dlfb_ops_write(struct fb_info *info, const char __user *buf,
 		dlfb_handle_damage(dev, 0, start, info->var.xres,
 			lines, info->screen_base);
 	}
-#endif
 
 	return result;
 }
@@ -644,14 +629,10 @@ static void dlfb_ops_copyarea(struct fb_info *info,
 
 	struct dlfb_data *dev = info->par;
 
-#if defined CONFIG_FB_SYS_COPYAREA || defined CONFIG_FB_SYS_COPYAREA_MODULE
-
 	sys_copyarea(info, area);
 
 	dlfb_handle_damage(dev, area->dx, area->dy,
 			area->width, area->height, info->screen_base);
-#endif
-
 }
 
 static void dlfb_ops_imageblit(struct fb_info *info,
@@ -659,15 +640,10 @@ static void dlfb_ops_imageblit(struct fb_info *info,
 {
 	struct dlfb_data *dev = info->par;
 
-#if defined CONFIG_FB_SYS_IMAGEBLIT || defined CONFIG_FB_SYS_IMAGEBLIT_MODULE
-
 	sys_imageblit(info, image);
 
 	dlfb_handle_damage(dev, image->dx, image->dy,
 			image->width, image->height, info->screen_base);
-
-#endif
-
 }
 
 static void dlfb_ops_fillrect(struct fb_info *info,
@@ -675,17 +651,12 @@ static void dlfb_ops_fillrect(struct fb_info *info,
 {
 	struct dlfb_data *dev = info->par;
 
-#if defined CONFIG_FB_SYS_FILLRECT || defined CONFIG_FB_SYS_FILLRECT_MODULE
-
 	sys_fillrect(info, rect);
 
 	dlfb_handle_damage(dev, rect->dx, rect->dy, rect->width,
 			      rect->height, info->screen_base);
-#endif
-
 }
 
-#ifdef CONFIG_FB_DEFERRED_IO
 /*
  * NOTE: fb_defio.c is holding info->fbdefio.mutex
  *   Touching ANY framebuffer memory that triggers a page fault
@@ -747,8 +718,6 @@ error:
 		   &dev->cpu_kcycles_used);
 }
 
-#endif
-
 static int dlfb_get_edid(struct dlfb_data *dev, char *edid, int len)
 {
 	int i;
@@ -765,7 +734,7 @@ static int dlfb_get_edid(struct dlfb_data *dev, char *edid, int len)
 				    (0x80 | (0x02 << 5)), i << 8, 0xA1, rbuf, 2,
 				    HZ);
 		if (ret < 1) {
-			dl_err("Read EDID byte %d failed err %x\n", i, ret);
+			pr_err("Read EDID byte %d failed err %x\n", i, ret);
 			i--;
 			break;
 		}
@@ -881,13 +850,12 @@ static int dlfb_ops_open(struct fb_info *info, int user)
 
 	kref_get(&dev->kref);
 
-#ifdef CONFIG_FB_DEFERRED_IO
 	if (fb_defio && (info->fbdefio == NULL)) {
 		/* enable defio at last moment if not disabled by client */
 
 		struct fb_deferred_io *fbdefio;
 
-		fbdefio = kmalloc(GFP_KERNEL, sizeof(struct fb_deferred_io));
+		fbdefio = kmalloc(sizeof(struct fb_deferred_io), GFP_KERNEL);
 
 		if (fbdefio) {
 			fbdefio->delay = DL_DEFIO_WRITE_DELAY;
@@ -897,9 +865,8 @@ static int dlfb_ops_open(struct fb_info *info, int user)
 		info->fbdefio = fbdefio;
 		fb_deferred_io_init(info);
 	}
-#endif
 
-	dl_notice("open /dev/fb%d user=%d fb_info=%p count=%d\n",
+	pr_notice("open /dev/fb%d user=%d fb_info=%p count=%d\n",
 	    info->node, user, info, dev->fb_count);
 
 	return 0;
@@ -923,7 +890,7 @@ static void dlfb_free(struct kref *kref)
 
 	kfree(dev->edid);
 
-	dl_warn("freeing dlfb_data %p\n", dev);
+	pr_warn("freeing dlfb_data %p\n", dev);
 
 	kfree(dev);
 }
@@ -959,7 +926,7 @@ static void dlfb_free_framebuffer_work(struct work_struct *work)
 	/* Assume info structure is freed after this point */
 	framebuffer_release(info);
 
-	dl_warn("fb_info for /dev/fb%d has been freed\n", node);
+	pr_warn("fb_info for /dev/fb%d has been freed\n", node);
 
 	/* ref taken in probe() as part of registering framebfufer */
 	kref_put(&dev->kref, dlfb_free);
@@ -978,16 +945,14 @@ static int dlfb_ops_release(struct fb_info *info, int user)
 	if (dev->virtualized && (dev->fb_count == 0))
 		schedule_delayed_work(&dev->free_framebuffer_work, HZ);
 
-#ifdef CONFIG_FB_DEFERRED_IO
 	if ((dev->fb_count == 0) && (info->fbdefio)) {
 		fb_deferred_io_cleanup(info);
 		kfree(info->fbdefio);
 		info->fbdefio = NULL;
 		info->fbops->fb_mmap = dlfb_ops_mmap;
 	}
-#endif
 
-	dl_warn("released /dev/fb%d user=%d count=%d\n",
+	pr_warn("released /dev/fb%d user=%d count=%d\n",
 		  info->node, user, dev->fb_count);
 
 	kref_put(&dev->kref, dlfb_free);
@@ -1005,12 +970,12 @@ static int dlfb_is_valid_mode(struct fb_videomode *mode,
 	struct dlfb_data *dev = info->par;
 
 	if (mode->xres * mode->yres > dev->sku_pixel_limit) {
-		dl_warn("%dx%d beyond chip capabilities\n",
+		pr_warn("%dx%d beyond chip capabilities\n",
 		       mode->xres, mode->yres);
 		return 0;
 	}
 
-	dl_info("%dx%d valid mode\n", mode->xres, mode->yres);
+	pr_info("%dx%d valid mode\n", mode->xres, mode->yres);
 
 	return 1;
 }
@@ -1054,7 +1019,7 @@ static int dlfb_ops_set_par(struct fb_info *info)
 	u16 *pix_framebuffer;
 	int i;
 
-	dl_notice("set_par mode %dx%d\n", info->var.xres, info->var.yres);
+	pr_notice("set_par mode %dx%d\n", info->var.xres, info->var.yres);
 
 	result = dlfb_set_video_mode(dev, &info->var);
 
@@ -1104,7 +1069,7 @@ static int dlfb_ops_blank(int blank_mode, struct fb_info *info)
 
 static struct fb_ops dlfb_ops = {
 	.owner = THIS_MODULE,
-	.fb_read = dlfb_ops_read,
+	.fb_read = fb_sys_read,
 	.fb_write = dlfb_ops_write,
 	.fb_setcolreg = dlfb_ops_setcolreg,
 	.fb_fillrect = dlfb_ops_fillrect,
@@ -1133,7 +1098,7 @@ static int dlfb_realloc_framebuffer(struct dlfb_data *dev, struct fb_info *info)
 	unsigned char *new_fb;
 	unsigned char *new_back;
 
-	dl_warn("Reallocating framebuffer. Addresses will change!\n");
+	pr_warn("Reallocating framebuffer. Addresses will change!\n");
 
 	new_len = info->fix.line_length * info->var.yres;
 
@@ -1143,7 +1108,7 @@ static int dlfb_realloc_framebuffer(struct dlfb_data *dev, struct fb_info *info)
 		 */
 		new_fb = vmalloc(new_len);
 		if (!new_fb) {
-			dl_err("Virtual framebuffer alloc failed\n");
+			pr_err("Virtual framebuffer alloc failed\n");
 			goto error;
 		}
 
@@ -1165,7 +1130,7 @@ static int dlfb_realloc_framebuffer(struct dlfb_data *dev, struct fb_info *info)
 		 */
 		new_back = vmalloc(new_len);
 		if (!new_back)
-			dl_info("No shadow/backing buffer allcoated\n");
+			pr_info("No shadow/backing buffer allcoated\n");
 		else {
 			if (dev->backing_buffer)
 				vfree(dev->backing_buffer);
@@ -1207,7 +1172,7 @@ static int dlfb_setup_modes(struct dlfb_data *dev,
 	if (info->dev) /* only use mutex if info has been registered */
 		mutex_lock(&info->lock);
 
-	edid = kmalloc(MAX_EDID_SIZE, GFP_KERNEL);
+	edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
 	if (!edid) {
 		result = -ENOMEM;
 		goto error;
@@ -1223,9 +1188,9 @@ static int dlfb_setup_modes(struct dlfb_data *dev,
 	 */
 	while (tries--) {
 
-		i = dlfb_get_edid(dev, edid, MAX_EDID_SIZE);
+		i = dlfb_get_edid(dev, edid, EDID_LENGTH);
 
-		if (i >= MIN_EDID_SIZE)
+		if (i >= EDID_LENGTH)
 			fb_edid_to_monspecs(edid, &info->monspecs);
 
 		if (info->monspecs.modedb_len > 0) {
@@ -1238,24 +1203,24 @@ static int dlfb_setup_modes(struct dlfb_data *dev,
 	/* If that fails, use a previously returned EDID if available */
 	if (info->monspecs.modedb_len == 0) {
 
-		dl_err("Unable to get valid EDID from device/display\n");
+		pr_err("Unable to get valid EDID from device/display\n");
 
 		if (dev->edid) {
 			fb_edid_to_monspecs(dev->edid, &info->monspecs);
 			if (info->monspecs.modedb_len > 0)
-				dl_err("Using previously queried EDID\n");
+				pr_err("Using previously queried EDID\n");
 		}
 	}
 
 	/* If that fails, use the default EDID we were handed */
 	if (info->monspecs.modedb_len == 0) {
-		if (default_edid_size >= MIN_EDID_SIZE) {
+		if (default_edid_size >= EDID_LENGTH) {
 			fb_edid_to_monspecs(default_edid, &info->monspecs);
 			if (info->monspecs.modedb_len > 0) {
 				memcpy(edid, default_edid, default_edid_size);
 				dev->edid = edid;
 				dev->edid_size = default_edid_size;
-				dl_err("Using default/backup EDID\n");
+				pr_err("Using default/backup EDID\n");
 			}
 		}
 	}
@@ -1381,7 +1346,7 @@ static ssize_t edid_show(
 	if (off + count > dev->edid_size)
 		count = dev->edid_size - off;
 
-	dl_info("sysfs edid copy %p to %p, %d bytes\n",
+	pr_info("sysfs edid copy %p to %p, %d bytes\n",
 		dev->edid, buf, (int) count);
 
 	memcpy(buf, dev->edid, count);
@@ -1398,15 +1363,13 @@ static ssize_t edid_store(
 	struct dlfb_data *dev = fb_info->par;
 
 	/* We only support write of entire EDID at once, no offset*/
-	if ((src_size < MIN_EDID_SIZE) ||
-	    (src_size > MAX_EDID_SIZE) ||
-	    (src_off != 0))
+	if ((src_size != EDID_LENGTH) || (src_off != 0))
 		return 0;
 
 	dlfb_setup_modes(dev, fb_info, src, src_size);
 
 	if (dev->edid && (memcmp(src, dev->edid, src_size) == 0)) {
-		dl_info("sysfs written EDID is new default\n");
+		pr_info("sysfs written EDID is new default\n");
 		dlfb_ops_set_par(fb_info);
 		return src_size;
 	} else
@@ -1431,7 +1394,7 @@ static ssize_t metrics_reset_store(struct device *fbdev,
 static struct bin_attribute edid_attr = {
 	.attr.name = "edid",
 	.attr.mode = 0666,
-	.size = MAX_EDID_SIZE,
+	.size = EDID_LENGTH,
 	.read = edid_show,
 	.write = edid_store
 };
@@ -1441,7 +1404,7 @@ static struct device_attribute fb_device_attrs[] = {
 	__ATTR_RO(metrics_bytes_identical),
 	__ATTR_RO(metrics_bytes_sent),
 	__ATTR_RO(metrics_cpu_kcycles_used),
-	__ATTR(metrics_reset, S_IWUGO, NULL, metrics_reset_store),
+	__ATTR(metrics_reset, S_IWUSR, NULL, metrics_reset_store),
 };
 
 /*
@@ -1479,7 +1442,7 @@ static int dlfb_parse_vendor_descriptor(struct dlfb_data *dev,
 	total_len = usb_get_descriptor(usbdev, 0x5f, /* vendor specific */
 				    0, desc, MAX_VENDOR_DESCRIPTOR_SIZE);
 	if (total_len > 5) {
-		dl_info("vendor descriptor length:%x data:%02x %02x %02x %02x" \
+		pr_info("vendor descriptor length:%x data:%02x %02x %02x %02x" \
 			"%02x %02x %02x %02x %02x %02x %02x\n",
 			total_len, desc[0],
 			desc[1], desc[2], desc[3], desc[4], desc[5], desc[6],
@@ -1508,7 +1471,7 @@ static int dlfb_parse_vendor_descriptor(struct dlfb_data *dev,
 			case 0x0200: { /* max_area */
 				u32 max_area;
 				max_area = le32_to_cpu(*((u32 *)desc));
-				dl_warn("DL chip limited to %d pixel modes\n",
+				pr_warn("DL chip limited to %d pixel modes\n",
 					max_area);
 				dev->sku_pixel_limit = max_area;
 				break;
@@ -1524,7 +1487,7 @@ static int dlfb_parse_vendor_descriptor(struct dlfb_data *dev,
 
 unrecognized:
 	/* allow udlfb to load for now even if firmware unrecognized */
-	dl_err("Unrecognized vendor firmware descriptor\n");
+	pr_err("Unrecognized vendor firmware descriptor\n");
 
 success:
 	kfree(buf);
@@ -1557,24 +1520,24 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 	dev->gdev = &usbdev->dev; /* our generic struct device * */
 	usb_set_intfdata(interface, dev);
 
-	dl_info("%s %s - serial #%s\n",
+	pr_info("%s %s - serial #%s\n",
 		usbdev->manufacturer, usbdev->product, usbdev->serial);
-	dl_info("vid_%04x&pid_%04x&rev_%04x driver's dlfb_data struct at %p\n",
+	pr_info("vid_%04x&pid_%04x&rev_%04x driver's dlfb_data struct at %p\n",
 		usbdev->descriptor.idVendor, usbdev->descriptor.idProduct,
 		usbdev->descriptor.bcdDevice, dev);
-	dl_info("console enable=%d\n", console);
-	dl_info("fb_defio enable=%d\n", fb_defio);
+	pr_info("console enable=%d\n", console);
+	pr_info("fb_defio enable=%d\n", fb_defio);
 
 	dev->sku_pixel_limit = 2048 * 1152; /* default to maximum */
 
 	if (!dlfb_parse_vendor_descriptor(dev, usbdev)) {
-		dl_err("firmware not recognized. Assume incompatible device\n");
+		pr_err("firmware not recognized. Assume incompatible device\n");
 		goto error;
 	}
 
 	if (!dlfb_alloc_urb_list(dev, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
 		retval = -ENOMEM;
-		dl_err("dlfb_alloc_urb_list failed\n");
+		pr_err("dlfb_alloc_urb_list failed\n");
 		goto error;
 	}
 
@@ -1584,7 +1547,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 	info = framebuffer_alloc(0, &usbdev->dev);
 	if (!info) {
 		retval = -ENOMEM;
-		dl_err("framebuffer_alloc failed\n");
+		pr_err("framebuffer_alloc failed\n");
 		goto error;
 	}
 
@@ -1595,7 +1558,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 
 	retval = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (retval < 0) {
-		dl_err("fb_alloc_cmap failed %x\n", retval);
+		pr_err("fb_alloc_cmap failed %x\n", retval);
 		goto error;
 	}
 
@@ -1606,7 +1569,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 
 	retval = dlfb_setup_modes(dev, info, NULL, 0);
 	if (retval != 0) {
-		dl_err("unable to find common mode for display and adapter\n");
+		pr_err("unable to find common mode for display and adapter\n");
 		goto error;
 	}
 
@@ -1620,7 +1583,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 
 	retval = register_framebuffer(info);
 	if (retval < 0) {
-		dl_err("register_framebuffer failed %d\n", retval);
+		pr_err("register_framebuffer failed %d\n", retval);
 		goto error;
 	}
 
@@ -1629,7 +1592,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
 
 	device_create_bin_file(info->dev, &edid_attr);
 
-	dl_info("DisplayLink USB device /dev/fb%d attached. %dx%d resolution."
+	pr_info("DisplayLink USB device /dev/fb%d attached. %dx%d resolution."
 			" Using %dK framebuffer memory\n", info->node,
 			info->var.xres, info->var.yres,
 			((dev->backing_buffer) ?
@@ -1673,7 +1636,7 @@ static void dlfb_usb_disconnect(struct usb_interface *interface)
 	dev = usb_get_intfdata(interface);
 	info = dev->info;
 
-	dl_info("USB disconnect starting\n");
+	pr_info("USB disconnect starting\n");
 
 	/* we virtualize until all fb clients release. Then we free */
 	dev->virtualized = true;
@@ -1737,7 +1700,7 @@ static void dlfb_urb_completion(struct urb *urb)
 		if (!(urb->status == -ENOENT ||
 		    urb->status == -ECONNRESET ||
 		    urb->status == -ESHUTDOWN)) {
-			dl_err("%s - nonzero write bulk status received: %d\n",
+			pr_err("%s - nonzero write bulk status received: %d\n",
 				__func__, urb->status);
 			atomic_set(&dev->lost_pixels, 1);
 		}
@@ -1769,7 +1732,7 @@ static void dlfb_free_urb_list(struct dlfb_data *dev)
 	int ret;
 	unsigned long flags;
 
-	dl_notice("Waiting for completes and freeing all render urbs\n");
+	pr_notice("Waiting for completes and freeing all render urbs\n");
 
 	/* keep waiting and freeing, until we've got 'em all */
 	while (count--) {
@@ -1848,7 +1811,7 @@ static int dlfb_alloc_urb_list(struct dlfb_data *dev, int count, size_t size)
 	dev->urbs.count = i;
 	dev->urbs.available = i;
 
-	dl_notice("allocated %d %d byte urbs\n", i, (int) size);
+	pr_notice("allocated %d %d byte urbs\n", i, (int) size);
 
 	return i;
 }
@@ -1865,7 +1828,7 @@ static struct urb *dlfb_get_urb(struct dlfb_data *dev)
 	ret = down_timeout(&dev->urbs.limit_sem, GET_URB_TIMEOUT);
 	if (ret) {
 		atomic_set(&dev->lost_pixels, 1);
-		dl_warn("wait for urb interrupted: %x available: %d\n",
+		pr_warn("wait for urb interrupted: %x available: %d\n",
 		       ret, dev->urbs.available);
 		goto error;
 	}
@@ -1897,7 +1860,7 @@ static int dlfb_submit_urb(struct dlfb_data *dev, struct urb *urb, size_t len)
 	if (ret) {
 		dlfb_urb_completion(urb); /* because no one else will */
 		atomic_set(&dev->lost_pixels, 1);
-		dl_err("usb_submit_urb error %x\n", ret);
+		pr_err("usb_submit_urb error %x\n", ret);
 	}
 	return ret;
 }
diff --git a/drivers/video/via/via-core.c b/drivers/video/via/via-core.c
index a3aa9170950..6723d6910cd 100644
--- a/drivers/video/via/via-core.c
+++ b/drivers/video/via/via-core.c
@@ -15,6 +15,9 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/list.h>
+#include <linux/pm.h>
+#include <asm/olpc.h>
 
 /*
  * The default port config.
@@ -29,6 +32,19 @@ static struct via_port_cfg adap_configs[] = {
 };
 
 /*
+ * The OLPC XO-1.5 puts the camera power and reset lines onto
+ * GPIO 2C.
+ */
+static const struct via_port_cfg olpc_adap_configs[] = {
+	[VIA_PORT_26]	= { VIA_PORT_I2C,  VIA_MODE_I2C, VIASR, 0x26 },
+	[VIA_PORT_31]	= { VIA_PORT_I2C,  VIA_MODE_I2C, VIASR, 0x31 },
+	[VIA_PORT_25]	= { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x25 },
+	[VIA_PORT_2C]	= { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x2c },
+	[VIA_PORT_3D]	= { VIA_PORT_GPIO, VIA_MODE_GPIO, VIASR, 0x3d },
+	{ 0, 0, 0, 0 }
+};
+
+/*
  * We currently only support one viafb device (will there ever be
  * more than one?), so just declare it globally here.
  */
@@ -575,6 +591,78 @@ static void via_teardown_subdevs(void)
 		}
 }
 
+/*
+ * Power management functions
+ */
+#ifdef CONFIG_PM
+static LIST_HEAD(viafb_pm_hooks);
+static DEFINE_MUTEX(viafb_pm_hooks_lock);
+
+void viafb_pm_register(struct viafb_pm_hooks *hooks)
+{
+	INIT_LIST_HEAD(&hooks->list);
+
+	mutex_lock(&viafb_pm_hooks_lock);
+	list_add_tail(&hooks->list, &viafb_pm_hooks);
+	mutex_unlock(&viafb_pm_hooks_lock);
+}
+EXPORT_SYMBOL_GPL(viafb_pm_register);
+
+void viafb_pm_unregister(struct viafb_pm_hooks *hooks)
+{
+	mutex_lock(&viafb_pm_hooks_lock);
+	list_del(&hooks->list);
+	mutex_unlock(&viafb_pm_hooks_lock);
+}
+EXPORT_SYMBOL_GPL(viafb_pm_unregister);
+
+static int via_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct viafb_pm_hooks *hooks;
+
+	if (state.event != PM_EVENT_SUSPEND)
+		return 0;
+	/*
+	 * "I've occasionally hit a few drivers that caused suspend
+	 * failures, and each and every time it was a driver bug, and
+	 * the right thing to do was to just ignore the error and suspend
+	 * anyway - returning an error code and trying to undo the suspend
+	 * is not what anybody ever really wants, even if our model
+	 *_allows_ for it."
+	 * -- Linus Torvalds, Dec. 7, 2009
+	 */
+	mutex_lock(&viafb_pm_hooks_lock);
+	list_for_each_entry_reverse(hooks, &viafb_pm_hooks, list)
+		hooks->suspend(hooks->private);
+	mutex_unlock(&viafb_pm_hooks_lock);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
+}
+
+static int via_resume(struct pci_dev *pdev)
+{
+	struct viafb_pm_hooks *hooks;
+
+	/* Get the bus side powered up */
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	if (pci_enable_device(pdev))
+		return 0;
+
+	pci_set_master(pdev);
+
+	/* Now bring back any subdevs */
+	mutex_lock(&viafb_pm_hooks_lock);
+	list_for_each_entry(hooks, &viafb_pm_hooks, list)
+		hooks->resume(hooks->private);
+	mutex_unlock(&viafb_pm_hooks_lock);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
 
 static int __devinit via_pci_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent)
@@ -584,6 +672,7 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	ret = pci_enable_device(pdev);
 	if (ret)
 		return ret;
+
 	/*
 	 * Global device initialization.
 	 */
@@ -591,6 +680,9 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
 	global_dev.pdev = pdev;
 	global_dev.chip_type = ent->driver_data;
 	global_dev.port_cfg = adap_configs;
+	if (machine_is_olpc())
+		global_dev.port_cfg = olpc_adap_configs;
+
 	spin_lock_init(&global_dev.reg_lock);
 	ret = via_pci_setup_mmio(&global_dev);
 	if (ret)
@@ -663,8 +755,8 @@ static struct pci_driver via_driver = {
 	.probe		= via_pci_probe,
 	.remove		= __devexit_p(via_pci_remove),
 #ifdef CONFIG_PM
-	.suspend	= viafb_suspend,
-	.resume		= viafb_resume,
+	.suspend	= via_suspend,
+	.resume		= via_resume,
 #endif
 };
 
diff --git a/drivers/video/via/via-gpio.c b/drivers/video/via/via-gpio.c
index 39acb37e7a1..c2a0a1cfd3b 100644
--- a/drivers/video/via/via-gpio.c
+++ b/drivers/video/via/via-gpio.c
@@ -172,6 +172,28 @@ static void viafb_gpio_disable(struct viafb_gpio *gpio)
 	via_write_reg_mask(VIASR, gpio->vg_port_index, 0, 0x02);
 }
 
+#ifdef CONFIG_PM
+
+static int viafb_gpio_suspend(void *private)
+{
+	return 0;
+}
+
+static int viafb_gpio_resume(void *private)
+{
+	int i;
+
+	for (i = 0; i < gpio_config.gpio_chip.ngpio; i += 2)
+		viafb_gpio_enable(gpio_config.active_gpios[i]);
+	return 0;
+}
+
+static struct viafb_pm_hooks viafb_gpio_pm_hooks = {
+	.suspend = viafb_gpio_suspend,
+	.resume = viafb_gpio_resume
+};
+#endif /* CONFIG_PM */
+
 /*
  * Look up a specific gpio and return the number it was assigned.
  */
@@ -236,6 +258,9 @@ static __devinit int viafb_gpio_probe(struct platform_device *platdev)
 		printk(KERN_ERR "viafb: failed to add gpios (%d)\n", ret);
 		gpio_config.gpio_chip.ngpio = 0;
 	}
+#ifdef CONFIG_PM
+	viafb_pm_register(&viafb_gpio_pm_hooks);
+#endif
 	return ret;
 }
 
@@ -245,6 +270,10 @@ static int viafb_gpio_remove(struct platform_device *platdev)
 	unsigned long flags;
 	int ret = 0, i;
 
+#ifdef CONFIG_PM
+	viafb_pm_unregister(&viafb_gpio_pm_hooks);
+#endif
+
 	/*
 	 * Get unregistered.
 	 */
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index d298cfccd6f..289edd51952 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -1672,31 +1672,19 @@ static int parse_mode(const char *str, u32 *xres, u32 *yres)
 
 
 #ifdef CONFIG_PM
-int viafb_suspend(struct pci_dev *pdev, pm_message_t state)
+static int viafb_suspend(void *unused)
 {
-	if (state.event == PM_EVENT_SUSPEND) {
-		acquire_console_sem();
-		fb_set_suspend(viafbinfo, 1);
-
-		viafb_sync(viafbinfo);
-
-		pci_save_state(pdev);
-		pci_disable_device(pdev);
-		pci_set_power_state(pdev, pci_choose_state(pdev, state));
-		release_console_sem();
-	}
+	acquire_console_sem();
+	fb_set_suspend(viafbinfo, 1);
+	viafb_sync(viafbinfo);
+	release_console_sem();
 
 	return 0;
 }
 
-int viafb_resume(struct pci_dev *pdev)
+static int viafb_resume(void *unused)
 {
 	acquire_console_sem();
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	if (pci_enable_device(pdev))
-		goto fail;
-	pci_set_master(pdev);
 	if (viaparinfo->shared->vdev->engine_mmio)
 		viafb_reset_engine(viaparinfo);
 	viafb_set_par(viafbinfo);
@@ -1704,11 +1692,15 @@ int viafb_resume(struct pci_dev *pdev)
 		viafb_set_par(viafbinfo1);
 	fb_set_suspend(viafbinfo, 0);
 
-fail:
 	release_console_sem();
 	return 0;
 }
 
+static struct viafb_pm_hooks viafb_fb_pm_hooks = {
+	.suspend = viafb_suspend,
+	.resume = viafb_resume
+};
+
 #endif
 
 
@@ -1899,6 +1891,10 @@ int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
 
 	viafb_init_proc(viaparinfo->shared);
 	viafb_init_dac(IGA2);
+
+#ifdef CONFIG_PM
+	viafb_pm_register(&viafb_fb_pm_hooks);
+#endif
 	return 0;
 
 out_fb_unreg:
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/via/viafbdev.h
index 4960e3da664..d66f963e930 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/via/viafbdev.h
@@ -108,6 +108,4 @@ void via_fb_pci_remove(struct pci_dev *pdev);
 /* Temporary */
 int viafb_init(void);
 void viafb_exit(void);
-int viafb_suspend(struct pci_dev *pdev, pm_message_t state);
-int viafb_resume(struct pci_dev *pdev);
 #endif /* __VIAFBDEV_H__ */
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
new file mode 100644
index 00000000000..7617f12e4fd
--- /dev/null
+++ b/drivers/video/vt8500lcdfb.c
@@ -0,0 +1,447 @@
+/*
+ *  linux/drivers/video/vt8500lcdfb.c
+ *
+ *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on skeletonfb.c and pxafb.c
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/wait.h>
+
+#include <mach/vt8500fb.h>
+
+#include "vt8500lcdfb.h"
+#include "wmt_ge_rops.h"
+
+#define to_vt8500lcd_info(__info) container_of(__info, \
+						struct vt8500lcd_info, fb)
+
+static int vt8500lcd_set_par(struct fb_info *info)
+{
+	struct vt8500lcd_info *fbi = to_vt8500lcd_info(info);
+	int reg_bpp = 5; /* 16bpp */
+	int i;
+	unsigned long control0;
+
+	if (!fbi)
+		return -EINVAL;
+
+	if (info->var.bits_per_pixel <= 8) {
+		/* palettized */
+		info->var.red.offset    = 0;
+		info->var.red.length    = info->var.bits_per_pixel;
+		info->var.red.msb_right = 0;
+
+		info->var.green.offset  = 0;
+		info->var.green.length  = info->var.bits_per_pixel;
+		info->var.green.msb_right = 0;
+
+		info->var.blue.offset   = 0;
+		info->var.blue.length   = info->var.bits_per_pixel;
+		info->var.blue.msb_right = 0;
+
+		info->var.transp.offset = 0;
+		info->var.transp.length = 0;
+		info->var.transp.msb_right = 0;
+
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		info->fix.line_length = info->var.xres_virtual /
+						(8/info->var.bits_per_pixel);
+	} else {
+		/* non-palettized */
+		info->var.transp.offset = 0;
+		info->var.transp.length = 0;
+		info->var.transp.msb_right = 0;
+
+		if (info->var.bits_per_pixel == 16) {
+			/* RGB565 */
+			info->var.red.offset = 11;
+			info->var.red.length = 5;
+			info->var.red.msb_right = 0;
+			info->var.green.offset = 5;
+			info->var.green.length = 6;
+			info->var.green.msb_right = 0;
+			info->var.blue.offset = 0;
+			info->var.blue.length = 5;
+			info->var.blue.msb_right = 0;
+		} else {
+			/* Equal depths per channel */
+			info->var.red.offset = info->var.bits_per_pixel
+							* 2 / 3;
+			info->var.red.length = info->var.bits_per_pixel / 3;
+			info->var.red.msb_right = 0;
+			info->var.green.offset = info->var.bits_per_pixel / 3;
+			info->var.green.length = info->var.bits_per_pixel / 3;
+			info->var.green.msb_right = 0;
+			info->var.blue.offset = 0;
+			info->var.blue.length = info->var.bits_per_pixel / 3;
+			info->var.blue.msb_right = 0;
+		}
+
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		info->fix.line_length = info->var.bits_per_pixel > 16 ?
+					info->var.xres_virtual << 2 :
+					info->var.xres_virtual << 1;
+	}
+
+	for (i = 0; i < 8; i++) {
+		if (bpp_values[i] == info->var.bits_per_pixel) {
+			reg_bpp = i;
+			continue;
+		}
+	}
+
+	control0 = readl(fbi->regbase) & ~0xf;
+	writel(0, fbi->regbase);
+	while (readl(fbi->regbase + 0x38) & 0x10)
+		/* wait */;
+	writel((((info->var.hsync_len - 1) & 0x3f) << 26)
+		| ((info->var.left_margin & 0xff) << 18)
+		| (((info->var.xres - 1) & 0x3ff) << 8)
+		| (info->var.right_margin & 0xff), fbi->regbase + 0x4);
+	writel((((info->var.vsync_len - 1) & 0x3f) << 26)
+		| ((info->var.upper_margin & 0xff) << 18)
+		| (((info->var.yres - 1) & 0x3ff) << 8)
+		| (info->var.lower_margin & 0xff), fbi->regbase + 0x8);
+	writel((((info->var.yres - 1) & 0x400) << 2)
+		| ((info->var.xres - 1) & 0x400), fbi->regbase + 0x10);
+	writel(0x80000000, fbi->regbase + 0x20);
+	writel(control0 | (reg_bpp << 1) | 0x100, fbi->regbase);
+
+	return 0;
+}
+
+static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int vt8500lcd_setcolreg(unsigned regno, unsigned red, unsigned green,
+			   unsigned blue, unsigned transp,
+			   struct fb_info *info) {
+	struct vt8500lcd_info *fbi = to_vt8500lcd_info(info);
+	int ret = 1;
+	unsigned int val;
+	if (regno >= 256)
+		return -EINVAL;
+
+	if (info->var.grayscale)
+		red = green = blue =
+			(19595 * red + 38470 * green + 7471 * blue) >> 16;
+
+	switch (fbi->fb.fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		if (regno < 16) {
+			u32 *pal = fbi->fb.pseudo_palette;
+
+			val  = chan_to_field(red, &fbi->fb.var.red);
+			val |= chan_to_field(green, &fbi->fb.var.green);
+			val |= chan_to_field(blue, &fbi->fb.var.blue);
+
+			pal[regno] = val;
+			ret = 0;
+		}
+		break;
+
+	case FB_VISUAL_STATIC_PSEUDOCOLOR:
+	case FB_VISUAL_PSEUDOCOLOR:
+		writew((red & 0xf800)
+		      | ((green >> 5) & 0x7e0)
+		      | ((blue >> 11) & 0x1f),
+		       fbi->palette_cpu + sizeof(u16) * regno);
+		break;
+	}
+
+	return ret;
+}
+
+static int vt8500lcd_ioctl(struct fb_info *info, unsigned int cmd,
+			 unsigned long arg)
+{
+	int ret = 0;
+	struct vt8500lcd_info *fbi = to_vt8500lcd_info(info);
+
+	if (cmd == FBIO_WAITFORVSYNC) {
+		/* Unmask End of Frame interrupt */
+		writel(0xffffffff ^ (1 << 3), fbi->regbase + 0x3c);
+		ret = wait_event_interruptible_timeout(fbi->wait,
+			readl(fbi->regbase + 0x38) & (1 << 3), HZ / 10);
+		/* Mask back to reduce unwanted interrupt traffic */
+		writel(0xffffffff, fbi->regbase + 0x3c);
+		if (ret < 0)
+			return ret;
+		if (ret == 0)
+			return -ETIMEDOUT;
+	}
+
+	return ret;
+}
+
+static int vt8500lcd_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	unsigned pixlen = info->fix.line_length / info->var.xres_virtual;
+	unsigned off = pixlen * var->xoffset
+		      + info->fix.line_length * var->yoffset;
+	struct vt8500lcd_info *fbi = to_vt8500lcd_info(info);
+
+	writel((1 << 31)
+		| (((var->xres_virtual - var->xres) * pixlen / 4) << 20)
+		| (off >> 2), fbi->regbase + 0x20);
+	return 0;
+}
+
+static struct fb_ops vt8500lcd_ops = {
+	.owner		= THIS_MODULE,
+	.fb_set_par	= vt8500lcd_set_par,
+	.fb_setcolreg	= vt8500lcd_setcolreg,
+	.fb_fillrect	= wmt_ge_fillrect,
+	.fb_copyarea	= wmt_ge_copyarea,
+	.fb_imageblit	= sys_imageblit,
+	.fb_sync	= wmt_ge_sync,
+	.fb_ioctl	= vt8500lcd_ioctl,
+	.fb_pan_display	= vt8500lcd_pan_display,
+};
+
+static irqreturn_t vt8500lcd_handle_irq(int irq, void *dev_id)
+{
+	struct vt8500lcd_info *fbi = dev_id;
+
+	if (readl(fbi->regbase + 0x38) & (1 << 3))
+		wake_up_interruptible(&fbi->wait);
+
+	writel(0xffffffff, fbi->regbase + 0x38);
+	return IRQ_HANDLED;
+}
+
+static int __devinit vt8500lcd_probe(struct platform_device *pdev)
+{
+	struct vt8500lcd_info *fbi;
+	struct resource *res;
+	struct vt8500fb_platform_data *pdata = pdev->dev.platform_data;
+	void *addr;
+	int irq, ret;
+
+	ret = -ENOMEM;
+	fbi = NULL;
+
+	fbi = kzalloc(sizeof(struct vt8500lcd_info) + sizeof(u32) * 16,
+							GFP_KERNEL);
+	if (!fbi) {
+		dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	strcpy(fbi->fb.fix.id, "VT8500 LCD");
+
+	fbi->fb.fix.type	= FB_TYPE_PACKED_PIXELS;
+	fbi->fb.fix.xpanstep	= 0;
+	fbi->fb.fix.ypanstep	= 1;
+	fbi->fb.fix.ywrapstep	= 0;
+	fbi->fb.fix.accel	= FB_ACCEL_NONE;
+
+	fbi->fb.var.nonstd	= 0;
+	fbi->fb.var.activate	= FB_ACTIVATE_NOW;
+	fbi->fb.var.height	= -1;
+	fbi->fb.var.width	= -1;
+	fbi->fb.var.vmode	= FB_VMODE_NONINTERLACED;
+
+	fbi->fb.fbops		= &vt8500lcd_ops;
+	fbi->fb.flags		= FBINFO_DEFAULT
+				| FBINFO_HWACCEL_COPYAREA
+				| FBINFO_HWACCEL_FILLRECT
+				| FBINFO_HWACCEL_YPAN
+				| FBINFO_VIRTFB
+				| FBINFO_PARTIAL_PAN_OK;
+	fbi->fb.node		= -1;
+
+	addr = fbi;
+	addr = addr + sizeof(struct vt8500lcd_info);
+	fbi->fb.pseudo_palette	= addr;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no I/O memory resource defined\n");
+		ret = -ENODEV;
+		goto failed_fbi;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), "vt8500lcd");
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		ret = -EBUSY;
+		goto failed_fbi;
+	}
+
+	fbi->regbase = ioremap(res->start, resource_size(res));
+	if (fbi->regbase == NULL) {
+		dev_err(&pdev->dev, "failed to map I/O memory\n");
+		ret = -EBUSY;
+		goto failed_free_res;
+	}
+
+	fbi->fb.fix.smem_start	= pdata->video_mem_phys;
+	fbi->fb.fix.smem_len	= pdata->video_mem_len;
+	fbi->fb.screen_base	= pdata->video_mem_virt;
+
+	fbi->palette_size	= PAGE_ALIGN(512);
+	fbi->palette_cpu	= dma_alloc_coherent(&pdev->dev,
+						     fbi->palette_size,
+						     &fbi->palette_phys,
+						     GFP_KERNEL);
+	if (fbi->palette_cpu == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate palette buffer\n");
+		ret = -ENOMEM;
+		goto failed_free_io;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no IRQ defined\n");
+		ret = -ENODEV;
+		goto failed_free_palette;
+	}
+
+	ret = request_irq(irq, vt8500lcd_handle_irq, IRQF_DISABLED, "LCD", fbi);
+	if (ret) {
+		dev_err(&pdev->dev, "request_irq failed: %d\n", ret);
+		ret = -EBUSY;
+		goto failed_free_palette;
+	}
+
+	init_waitqueue_head(&fbi->wait);
+
+	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
+		dev_err(&pdev->dev, "Failed to allocate color map\n");
+		ret = -ENOMEM;
+		goto failed_free_irq;
+	}
+
+	fb_videomode_to_var(&fbi->fb.var, &pdata->mode);
+	fbi->fb.var.bits_per_pixel	= pdata->bpp;
+	fbi->fb.var.xres_virtual	= pdata->xres_virtual;
+	fbi->fb.var.yres_virtual	= pdata->yres_virtual;
+
+	ret = vt8500lcd_set_par(&fbi->fb);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to set parameters\n");
+		goto failed_free_cmap;
+	}
+
+	writel(fbi->fb.fix.smem_start >> 22, fbi->regbase + 0x1c);
+	writel((fbi->palette_phys & 0xfffffe00) | 1, fbi->regbase + 0x18);
+
+	platform_set_drvdata(pdev, fbi);
+
+	ret = register_framebuffer(&fbi->fb);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Failed to register framebuffer device: %d\n", ret);
+		goto failed_free_cmap;
+	}
+
+	/*
+	 * Ok, now enable the LCD controller
+	 */
+	writel(readl(fbi->regbase) | 1, fbi->regbase);
+
+	return 0;
+
+failed_free_cmap:
+	if (fbi->fb.cmap.len)
+		fb_dealloc_cmap(&fbi->fb.cmap);
+failed_free_irq:
+	free_irq(irq, fbi);
+failed_free_palette:
+	dma_free_coherent(&pdev->dev, fbi->palette_size,
+			  fbi->palette_cpu, fbi->palette_phys);
+failed_free_io:
+	iounmap(fbi->regbase);
+failed_free_res:
+	release_mem_region(res->start, resource_size(res));
+failed_fbi:
+	platform_set_drvdata(pdev, NULL);
+	kfree(fbi);
+failed:
+	return ret;
+}
+
+static int __devexit vt8500lcd_remove(struct platform_device *pdev)
+{
+	struct vt8500lcd_info *fbi = platform_get_drvdata(pdev);
+	struct resource *res;
+	int irq;
+
+	unregister_framebuffer(&fbi->fb);
+
+	writel(0, fbi->regbase);
+
+	if (fbi->fb.cmap.len)
+		fb_dealloc_cmap(&fbi->fb.cmap);
+
+	irq = platform_get_irq(pdev, 0);
+	free_irq(irq, fbi);
+
+	dma_free_coherent(&pdev->dev, fbi->palette_size,
+			  fbi->palette_cpu, fbi->palette_phys);
+
+	iounmap(fbi->regbase);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(fbi);
+
+	return 0;
+}
+
+static struct platform_driver vt8500lcd_driver = {
+	.probe		= vt8500lcd_probe,
+	.remove		= __devexit_p(vt8500lcd_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "vt8500-lcd",
+	},
+};
+
+static int __init vt8500lcd_init(void)
+{
+	return platform_driver_register(&vt8500lcd_driver);
+}
+
+static void __exit vt8500lcd_exit(void)
+{
+	platform_driver_unregister(&vt8500lcd_driver);
+}
+
+module_init(vt8500lcd_init);
+module_exit(vt8500lcd_exit);
+
+MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com>");
+MODULE_DESCRIPTION("LCD controller driver for VIA VT8500");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/vt8500lcdfb.h b/drivers/video/vt8500lcdfb.h
new file mode 100644
index 00000000000..36ca3ca09d8
--- /dev/null
+++ b/drivers/video/vt8500lcdfb.h
@@ -0,0 +1,34 @@
+/*
+ *  linux/drivers/video/vt8500lcdfb.h
+ *
+ *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+struct vt8500lcd_info {
+	struct fb_info		fb;
+	void __iomem		*regbase;
+	void __iomem		*palette_cpu;
+	dma_addr_t		palette_phys;
+	size_t			palette_size;
+	wait_queue_head_t	wait;
+};
+
+static int bpp_values[] = {
+	1,
+	2,
+	4,
+	8,
+	12,
+	16,
+	18,
+	24,
+};
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
new file mode 100644
index 00000000000..96e34a56916
--- /dev/null
+++ b/drivers/video/wm8505fb.c
@@ -0,0 +1,422 @@
+/*
+ *  WonderMedia WM8505 Frame Buffer device driver
+ *
+ *  Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
+ *    Based on vt8500lcdfb.c
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/wait.h>
+
+#include <mach/vt8500fb.h>
+
+#include "wm8505fb_regs.h"
+#include "wmt_ge_rops.h"
+
+#define DRIVER_NAME "wm8505-fb"
+
+#define to_wm8505fb_info(__info) container_of(__info, \
+						struct wm8505fb_info, fb)
+struct wm8505fb_info {
+	struct fb_info		fb;
+	void __iomem		*regbase;
+	unsigned int		contrast;
+};
+
+
+static int wm8505fb_init_hw(struct fb_info *info)
+{
+	struct wm8505fb_info *fbi = to_wm8505fb_info(info);
+
+	int i;
+
+	/* I know the purpose only of few registers, so clear unknown */
+	for (i = 0; i < 0x200; i += 4)
+		writel(0, fbi->regbase + i);
+
+	/* Set frame buffer address */
+	writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR);
+	writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR1);
+
+	/* Set in-memory picture format to RGB 32bpp */
+	writel(0x1c,		       fbi->regbase + WMT_GOVR_COLORSPACE);
+	writel(1,		       fbi->regbase + WMT_GOVR_COLORSPACE1);
+
+	/* Virtual buffer size */
+	writel(info->var.xres,	       fbi->regbase + WMT_GOVR_XRES);
+	writel(info->var.xres_virtual, fbi->regbase + WMT_GOVR_XRES_VIRTUAL);
+
+	/* black magic ;) */
+	writel(0xf,		       fbi->regbase + WMT_GOVR_FHI);
+	writel(4,		       fbi->regbase + WMT_GOVR_DVO_SET);
+	writel(1,		       fbi->regbase + WMT_GOVR_MIF_ENABLE);
+	writel(1,		       fbi->regbase + WMT_GOVR_REG_UPDATE);
+
+	return 0;
+}
+
+static int wm8505fb_set_timing(struct fb_info *info)
+{
+	struct wm8505fb_info *fbi = to_wm8505fb_info(info);
+
+	int h_start = info->var.left_margin;
+	int h_end = h_start + info->var.xres;
+	int h_all = h_end + info->var.right_margin;
+	int h_sync = info->var.hsync_len;
+
+	int v_start = info->var.upper_margin;
+	int v_end = v_start + info->var.yres;
+	int v_all = v_end + info->var.lower_margin;
+	int v_sync = info->var.vsync_len;
+
+	writel(0, fbi->regbase + WMT_GOVR_TG);
+
+	writel(h_start, fbi->regbase + WMT_GOVR_TIMING_H_START);
+	writel(h_end,   fbi->regbase + WMT_GOVR_TIMING_H_END);
+	writel(h_all,   fbi->regbase + WMT_GOVR_TIMING_H_ALL);
+	writel(h_sync,  fbi->regbase + WMT_GOVR_TIMING_H_SYNC);
+
+	writel(v_start, fbi->regbase + WMT_GOVR_TIMING_V_START);
+	writel(v_end,   fbi->regbase + WMT_GOVR_TIMING_V_END);
+	writel(v_all,   fbi->regbase + WMT_GOVR_TIMING_V_ALL);
+	writel(v_sync,  fbi->regbase + WMT_GOVR_TIMING_V_SYNC);
+
+	writel(1, fbi->regbase + WMT_GOVR_TG);
+
+	return 0;
+}
+
+
+static int wm8505fb_set_par(struct fb_info *info)
+{
+	struct wm8505fb_info *fbi = to_wm8505fb_info(info);
+
+	if (!fbi)
+		return -EINVAL;
+
+	if (info->var.bits_per_pixel == 32) {
+		info->var.red.offset = 16;
+		info->var.red.length = 8;
+		info->var.red.msb_right = 0;
+		info->var.green.offset = 8;
+		info->var.green.length = 8;
+		info->var.green.msb_right = 0;
+		info->var.blue.offset = 0;
+		info->var.blue.length = 8;
+		info->var.blue.msb_right = 0;
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		info->fix.line_length = info->var.xres_virtual << 2;
+	}
+
+	wm8505fb_set_timing(info);
+
+	writel(fbi->contrast<<16 | fbi->contrast<<8 | fbi->contrast,
+		fbi->regbase + WMT_GOVR_CONTRAST);
+
+	return 0;
+}
+
+static ssize_t contrast_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct wm8505fb_info *fbi = to_wm8505fb_info(info);
+
+	return sprintf(buf, "%d\n", fbi->contrast);
+}
+
+static ssize_t contrast_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct wm8505fb_info *fbi = to_wm8505fb_info(info);
+	unsigned long tmp;
+
+	if (strict_strtoul(buf, 10, &tmp) || (tmp > 0xff))
+		return -EINVAL;
+	fbi->contrast = tmp;
+
+	wm8505fb_set_par(info);
+
+	return count;
+}
+
+static DEVICE_ATTR(contrast, 0644, contrast_show, contrast_store);
+
+static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+static int wm8505fb_setcolreg(unsigned regno, unsigned red, unsigned green,
+			   unsigned blue, unsigned transp,
+			   struct fb_info *info) {
+	struct wm8505fb_info *fbi = to_wm8505fb_info(info);
+	int ret = 1;
+	unsigned int val;
+	if (regno >= 256)
+		return -EINVAL;
+
+	if (info->var.grayscale)
+		red = green = blue =
+			(19595 * red + 38470 * green + 7471 * blue) >> 16;
+
+	switch (fbi->fb.fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		if (regno < 16) {
+			u32 *pal = info->pseudo_palette;
+
+			val  = chan_to_field(red, &fbi->fb.var.red);
+			val |= chan_to_field(green, &fbi->fb.var.green);
+			val |= chan_to_field(blue, &fbi->fb.var.blue);
+
+			pal[regno] = val;
+			ret = 0;
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static int wm8505fb_pan_display(struct fb_var_screeninfo *var,
+				struct fb_info *info)
+{
+	struct wm8505fb_info *fbi = to_wm8505fb_info(info);
+
+	writel(var->xoffset, fbi->regbase + WMT_GOVR_XPAN);
+	writel(var->yoffset, fbi->regbase + WMT_GOVR_YPAN);
+	return 0;
+}
+
+static int wm8505fb_blank(int blank, struct fb_info *info)
+{
+	struct wm8505fb_info *fbi = to_wm8505fb_info(info);
+
+	switch (blank) {
+	case FB_BLANK_UNBLANK:
+		wm8505fb_set_timing(info);
+		break;
+	default:
+		writel(0,  fbi->regbase + WMT_GOVR_TIMING_V_SYNC);
+		break;
+	}
+
+	return 0;
+}
+
+static struct fb_ops wm8505fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_set_par	= wm8505fb_set_par,
+	.fb_setcolreg	= wm8505fb_setcolreg,
+	.fb_fillrect	= wmt_ge_fillrect,
+	.fb_copyarea	= wmt_ge_copyarea,
+	.fb_imageblit	= sys_imageblit,
+	.fb_sync	= wmt_ge_sync,
+	.fb_pan_display	= wm8505fb_pan_display,
+	.fb_blank	= wm8505fb_blank,
+};
+
+static int __devinit wm8505fb_probe(struct platform_device *pdev)
+{
+	struct wm8505fb_info	*fbi;
+	struct resource		*res;
+	void			*addr;
+	struct vt8500fb_platform_data *pdata;
+	int ret;
+
+	pdata = pdev->dev.platform_data;
+
+	ret = -ENOMEM;
+	fbi = NULL;
+
+	fbi = kzalloc(sizeof(struct wm8505fb_info) + sizeof(u32) * 16,
+							GFP_KERNEL);
+	if (!fbi) {
+		dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
+		ret = -ENOMEM;
+		goto failed;
+	}
+
+	strcpy(fbi->fb.fix.id, DRIVER_NAME);
+
+	fbi->fb.fix.type	= FB_TYPE_PACKED_PIXELS;
+	fbi->fb.fix.xpanstep	= 1;
+	fbi->fb.fix.ypanstep	= 1;
+	fbi->fb.fix.ywrapstep	= 0;
+	fbi->fb.fix.accel	= FB_ACCEL_NONE;
+
+	fbi->fb.fbops		= &wm8505fb_ops;
+	fbi->fb.flags		= FBINFO_DEFAULT
+				| FBINFO_HWACCEL_COPYAREA
+				| FBINFO_HWACCEL_FILLRECT
+				| FBINFO_HWACCEL_XPAN
+				| FBINFO_HWACCEL_YPAN
+				| FBINFO_VIRTFB
+				| FBINFO_PARTIAL_PAN_OK;
+	fbi->fb.node		= -1;
+
+	addr = fbi;
+	addr = addr + sizeof(struct wm8505fb_info);
+	fbi->fb.pseudo_palette	= addr;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no I/O memory resource defined\n");
+		ret = -ENODEV;
+		goto failed_fbi;
+	}
+
+	res = request_mem_region(res->start, resource_size(res), DRIVER_NAME);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		ret = -EBUSY;
+		goto failed_fbi;
+	}
+
+	fbi->regbase = ioremap(res->start, resource_size(res));
+	if (fbi->regbase == NULL) {
+		dev_err(&pdev->dev, "failed to map I/O memory\n");
+		ret = -EBUSY;
+		goto failed_free_res;
+	}
+
+	fb_videomode_to_var(&fbi->fb.var, &pdata->mode);
+
+	fbi->fb.var.nonstd		= 0;
+	fbi->fb.var.activate		= FB_ACTIVATE_NOW;
+
+	fbi->fb.var.height		= -1;
+	fbi->fb.var.width		= -1;
+	fbi->fb.var.xres_virtual	= pdata->xres_virtual;
+	fbi->fb.var.yres_virtual	= pdata->yres_virtual;
+	fbi->fb.var.bits_per_pixel	= pdata->bpp;
+
+	fbi->fb.fix.smem_start	= pdata->video_mem_phys;
+	fbi->fb.fix.smem_len	= pdata->video_mem_len;
+	fbi->fb.screen_base	= pdata->video_mem_virt;
+	fbi->fb.screen_size	= pdata->video_mem_len;
+
+	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
+		dev_err(&pdev->dev, "Failed to allocate color map\n");
+		ret = -ENOMEM;
+		goto failed_free_io;
+	}
+
+	wm8505fb_init_hw(&fbi->fb);
+
+	fbi->contrast = 0x80;
+	ret = wm8505fb_set_par(&fbi->fb);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to set parameters\n");
+		goto failed_free_cmap;
+	}
+
+	platform_set_drvdata(pdev, fbi);
+
+	ret = register_framebuffer(&fbi->fb);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Failed to register framebuffer device: %d\n", ret);
+		goto failed_free_cmap;
+	}
+
+	ret = device_create_file(&pdev->dev, &dev_attr_contrast);
+	if (ret < 0) {
+		printk(KERN_WARNING "fb%d: failed to register attributes (%d)\n",
+			fbi->fb.node, ret);
+	}
+
+	printk(KERN_INFO "fb%d: %s frame buffer at 0x%lx-0x%lx\n",
+	       fbi->fb.node, fbi->fb.fix.id, fbi->fb.fix.smem_start,
+	       fbi->fb.fix.smem_start + fbi->fb.fix.smem_len - 1);
+
+	return 0;
+
+failed_free_cmap:
+	if (fbi->fb.cmap.len)
+		fb_dealloc_cmap(&fbi->fb.cmap);
+failed_free_io:
+	iounmap(fbi->regbase);
+failed_free_res:
+	release_mem_region(res->start, resource_size(res));
+failed_fbi:
+	platform_set_drvdata(pdev, NULL);
+	kfree(fbi);
+failed:
+	return ret;
+}
+
+static int __devexit wm8505fb_remove(struct platform_device *pdev)
+{
+	struct wm8505fb_info *fbi = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	device_remove_file(&pdev->dev, &dev_attr_contrast);
+
+	unregister_framebuffer(&fbi->fb);
+
+	writel(0, fbi->regbase);
+
+	if (fbi->fb.cmap.len)
+		fb_dealloc_cmap(&fbi->fb.cmap);
+
+	iounmap(fbi->regbase);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(fbi);
+
+	return 0;
+}
+
+static struct platform_driver wm8505fb_driver = {
+	.probe		= wm8505fb_probe,
+	.remove		= __devexit_p(wm8505fb_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= DRIVER_NAME,
+	},
+};
+
+static int __init wm8505fb_init(void)
+{
+	return platform_driver_register(&wm8505fb_driver);
+}
+
+static void __exit wm8505fb_exit(void)
+{
+	platform_driver_unregister(&wm8505fb_driver);
+}
+
+module_init(wm8505fb_init);
+module_exit(wm8505fb_exit);
+
+MODULE_AUTHOR("Ed Spiridonov <edo.rus@gmail.com>");
+MODULE_DESCRIPTION("Framebuffer driver for WMT WM8505");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/wm8505fb_regs.h b/drivers/video/wm8505fb_regs.h
new file mode 100644
index 00000000000..4dd41668c6d
--- /dev/null
+++ b/drivers/video/wm8505fb_regs.h
@@ -0,0 +1,76 @@
+/*
+ *  GOVR registers list for WM8505 chips
+ *
+ *  Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
+ *   Based on VIA/WonderMedia wm8510-govrh-reg.h
+ *   http://github.com/projectgus/kernel_wm8505/blob/wm8505_2.6.29/
+ *         drivers/video/wmt/register/wm8510/wm8510-govrh-reg.h
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _WM8505FB_REGS_H
+#define _WM8505FB_REGS_H
+
+/*
+ * Color space select register, default value 0x1c
+ *   BIT0 GOVRH_DVO_YUV2RGB_ENABLE
+ *   BIT1 GOVRH_VGA_YUV2RGB_ENABLE
+ *   BIT2 GOVRH_RGB_MODE
+ *   BIT3 GOVRH_DAC_CLKINV
+ *   BIT4 GOVRH_BLANK_ZERO
+ */
+#define WMT_GOVR_COLORSPACE	0x1e4
+/*
+ * Another colorspace select register, default value 1
+ *   BIT0 GOVRH_DVO_RGB
+ *   BIT1 GOVRH_DVO_YUV422
+ */
+#define WMT_GOVR_COLORSPACE1	 0x30
+
+#define WMT_GOVR_CONTRAST	0x1b8
+#define WMT_GOVR_BRGHTNESS	0x1bc /* incompatible with RGB? */
+
+/* Framubeffer address */
+#define WMT_GOVR_FBADDR		 0x90
+#define WMT_GOVR_FBADDR1	 0x94 /* UV offset in YUV mode */
+
+/* Offset of visible window */
+#define WMT_GOVR_XPAN		 0xa4
+#define WMT_GOVR_YPAN		 0xa0
+
+#define WMT_GOVR_XRES		 0x98
+#define WMT_GOVR_XRES_VIRTUAL	 0x9c
+
+#define WMT_GOVR_MIF_ENABLE	 0x80
+#define WMT_GOVR_FHI		 0xa8
+#define WMT_GOVR_REG_UPDATE	 0xe4
+
+/*
+ *   BIT0 GOVRH_DVO_OUTWIDTH
+ *   BIT1 GOVRH_DVO_SYNC_POLAR
+ *   BIT2 GOVRH_DVO_ENABLE
+ */
+#define WMT_GOVR_DVO_SET	0x148
+
+/* Timing generator? */
+#define WMT_GOVR_TG		0x100
+
+/* Timings */
+#define WMT_GOVR_TIMING_H_ALL	0x108
+#define WMT_GOVR_TIMING_V_ALL	0x10c
+#define WMT_GOVR_TIMING_V_START	0x110
+#define WMT_GOVR_TIMING_V_END	0x114
+#define WMT_GOVR_TIMING_H_START	0x118
+#define WMT_GOVR_TIMING_H_END	0x11c
+#define WMT_GOVR_TIMING_V_SYNC	0x128
+#define WMT_GOVR_TIMING_H_SYNC	0x12c
+
+#endif /* _WM8505FB_REGS_H */
diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/wmt_ge_rops.c
new file mode 100644
index 00000000000..45832b7ef7d
--- /dev/null
+++ b/drivers/video/wmt_ge_rops.c
@@ -0,0 +1,186 @@
+/*
+ *  linux/drivers/video/wmt_ge_rops.c
+ *
+ *  Accelerators for raster operations using WonderMedia Graphics Engine
+ *
+ *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/fb.h>
+#include <linux/platform_device.h>
+#include "fb_draw.h"
+
+#define GE_COMMAND_OFF		0x00
+#define GE_DEPTH_OFF		0x04
+#define GE_HIGHCOLOR_OFF	0x08
+#define GE_ROPCODE_OFF		0x14
+#define GE_FIRE_OFF		0x18
+#define GE_SRCBASE_OFF		0x20
+#define GE_SRCDISPW_OFF		0x24
+#define GE_SRCDISPH_OFF		0x28
+#define GE_SRCAREAX_OFF		0x2c
+#define GE_SRCAREAY_OFF		0x30
+#define GE_SRCAREAW_OFF		0x34
+#define GE_SRCAREAH_OFF		0x38
+#define GE_DESTBASE_OFF		0x3c
+#define GE_DESTDISPW_OFF	0x40
+#define GE_DESTDISPH_OFF	0x44
+#define GE_DESTAREAX_OFF	0x48
+#define GE_DESTAREAY_OFF	0x4c
+#define GE_DESTAREAW_OFF	0x50
+#define GE_DESTAREAH_OFF	0x54
+#define GE_PAT0C_OFF		0x88	/* Pattern 0 color */
+#define GE_ENABLE_OFF		0xec
+#define GE_INTEN_OFF		0xf0
+#define GE_STATUS_OFF		0xf8
+
+static void __iomem *regbase;
+
+void wmt_ge_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
+{
+	unsigned long fg, pat;
+
+	if (p->state != FBINFO_STATE_RUNNING)
+		return;
+
+	if (p->fix.visual == FB_VISUAL_TRUECOLOR ||
+	    p->fix.visual == FB_VISUAL_DIRECTCOLOR)
+		fg = ((u32 *) (p->pseudo_palette))[rect->color];
+	else
+		fg = rect->color;
+
+	pat = pixel_to_pat(p->var.bits_per_pixel, fg);
+
+	if (p->fbops->fb_sync)
+		p->fbops->fb_sync(p);
+
+	writel(p->var.bits_per_pixel == 32 ? 3 :
+	      (p->var.bits_per_pixel == 8 ? 0 : 1), regbase + GE_DEPTH_OFF);
+	writel(p->var.bits_per_pixel == 15 ? 1 : 0, regbase + GE_HIGHCOLOR_OFF);
+	writel(p->fix.smem_start, regbase + GE_DESTBASE_OFF);
+	writel(p->var.xres_virtual - 1, regbase + GE_DESTDISPW_OFF);
+	writel(p->var.yres_virtual - 1, regbase + GE_DESTDISPH_OFF);
+	writel(rect->dx, regbase + GE_DESTAREAX_OFF);
+	writel(rect->dy, regbase + GE_DESTAREAY_OFF);
+	writel(rect->width - 1, regbase + GE_DESTAREAW_OFF);
+	writel(rect->height - 1, regbase + GE_DESTAREAH_OFF);
+
+	writel(pat, regbase + GE_PAT0C_OFF);
+	writel(1, regbase + GE_COMMAND_OFF);
+	writel(rect->rop == ROP_XOR ? 0x5a : 0xf0, regbase + GE_ROPCODE_OFF);
+	writel(1, regbase + GE_FIRE_OFF);
+}
+EXPORT_SYMBOL_GPL(wmt_ge_fillrect);
+
+void wmt_ge_copyarea(struct fb_info *p, const struct fb_copyarea *area)
+{
+	if (p->state != FBINFO_STATE_RUNNING)
+		return;
+
+	if (p->fbops->fb_sync)
+		p->fbops->fb_sync(p);
+
+	writel(p->var.bits_per_pixel > 16 ? 3 :
+	      (p->var.bits_per_pixel > 8 ? 1 : 0), regbase + GE_DEPTH_OFF);
+
+	writel(p->fix.smem_start, regbase + GE_SRCBASE_OFF);
+	writel(p->var.xres_virtual - 1, regbase + GE_SRCDISPW_OFF);
+	writel(p->var.yres_virtual - 1, regbase + GE_SRCDISPH_OFF);
+	writel(area->sx, regbase + GE_SRCAREAX_OFF);
+	writel(area->sy, regbase + GE_SRCAREAY_OFF);
+	writel(area->width - 1, regbase + GE_SRCAREAW_OFF);
+	writel(area->height - 1, regbase + GE_SRCAREAH_OFF);
+
+	writel(p->fix.smem_start, regbase + GE_DESTBASE_OFF);
+	writel(p->var.xres_virtual - 1, regbase + GE_DESTDISPW_OFF);
+	writel(p->var.yres_virtual - 1, regbase + GE_DESTDISPH_OFF);
+	writel(area->dx, regbase + GE_DESTAREAX_OFF);
+	writel(area->dy, regbase + GE_DESTAREAY_OFF);
+	writel(area->width - 1, regbase + GE_DESTAREAW_OFF);
+	writel(area->height - 1, regbase + GE_DESTAREAH_OFF);
+
+	writel(0xcc, regbase + GE_ROPCODE_OFF);
+	writel(1, regbase + GE_COMMAND_OFF);
+	writel(1, regbase + GE_FIRE_OFF);
+}
+EXPORT_SYMBOL_GPL(wmt_ge_copyarea);
+
+int wmt_ge_sync(struct fb_info *p)
+{
+	int loops = 5000000;
+	while ((readl(regbase + GE_STATUS_OFF) & 4) && --loops)
+		cpu_relax();
+	return loops > 0 ? 0 : -EBUSY;
+}
+EXPORT_SYMBOL_GPL(wmt_ge_sync);
+
+static int __devinit wmt_ge_rops_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "no I/O memory resource defined\n");
+		return -ENODEV;
+	}
+
+	/* Only one ROP engine is presently supported. */
+	if (unlikely(regbase)) {
+		WARN_ON(1);
+		return -EBUSY;
+	}
+
+	regbase = ioremap(res->start, resource_size(res));
+	if (regbase == NULL) {
+		dev_err(&pdev->dev, "failed to map I/O memory\n");
+		return -EBUSY;
+	}
+
+	writel(1, regbase + GE_ENABLE_OFF);
+	printk(KERN_INFO "Enabled support for WMT GE raster acceleration\n");
+
+	return 0;
+}
+
+static int __devexit wmt_ge_rops_remove(struct platform_device *pdev)
+{
+	iounmap(regbase);
+	return 0;
+}
+
+static struct platform_driver wmt_ge_rops_driver = {
+	.probe		= wmt_ge_rops_probe,
+	.remove		= __devexit_p(wmt_ge_rops_remove),
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "wmt_ge_rops",
+	},
+};
+
+static int __init wmt_ge_rops_init(void)
+{
+	return platform_driver_register(&wmt_ge_rops_driver);
+}
+
+static void __exit wmt_ge_rops_exit(void)
+{
+	platform_driver_unregister(&wmt_ge_rops_driver);
+}
+
+module_init(wmt_ge_rops_init);
+module_exit(wmt_ge_rops_exit);
+
+MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com");
+MODULE_DESCRIPTION("Accelerators for raster operations using "
+		   "WonderMedia Graphics Engine");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/wmt_ge_rops.h b/drivers/video/wmt_ge_rops.h
new file mode 100644
index 00000000000..87380751a44
--- /dev/null
+++ b/drivers/video/wmt_ge_rops.h
@@ -0,0 +1,5 @@
+extern void wmt_ge_fillrect(struct fb_info *info,
+			    const struct fb_fillrect *rect);
+extern void wmt_ge_copyarea(struct fb_info *info,
+			    const struct fb_copyarea *area);
+extern int wmt_ge_sync(struct fb_info *info);
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/xen-fbfront.c
index 428d273be72..4abb0b9ed65 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -492,7 +492,7 @@ xenfb_make_preferred_console(void)
 		return;
 
 	acquire_console_sem();
-	for (c = console_drivers; c; c = c->next) {
+	for_each_console(c) {
 		if (!strcmp(c->name, "tty") && c->index == 0)
 			break;
 	}
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 3a43ebf83a4..efb35aa8309 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -9,19 +9,19 @@ static ssize_t device_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
-	return sprintf(buf, "%hu", dev->id.device);
+	return sprintf(buf, "0x%04x\n", dev->id.device);
 }
 static ssize_t vendor_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
-	return sprintf(buf, "%hu", dev->id.vendor);
+	return sprintf(buf, "0x%04x\n", dev->id.vendor);
 }
 static ssize_t status_show(struct device *_d,
 			   struct device_attribute *attr, char *buf)
 {
 	struct virtio_device *dev = container_of(_d,struct virtio_device,dev);
-	return sprintf(buf, "0x%08x", dev->config->get_status(dev));
+	return sprintf(buf, "0x%08x\n", dev->config->get_status(dev));
 }
 static ssize_t modalias_show(struct device *_d,
 			     struct device_attribute *attr, char *buf)
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 1475ed6b575..cc2f73e0347 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -230,9 +230,6 @@ add_head:
 	pr_debug("Added buffer head %i to %p\n", head, vq);
 	END_USE(vq);
 
-	/* If we're indirect, we can fit many (assuming not OOM). */
-	if (vq->indirect)
-		return vq->num_free ? vq->vring.num : 0;
 	return vq->num_free;
 }
 EXPORT_SYMBOL_GPL(virtqueue_add_buf_gfp);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 4a291045eba..a5ad77ef426 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -558,6 +558,9 @@ config IT8712F_WDT
 	  This is the driver for the built-in watchdog timer on the IT8712F
 	  Super I/0 chipset used on many motherboards.
 
+	  If the driver does not work, then make sure that the game port in
+	  the BIOS is enabled.
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called it8712f_wdt.
 
diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c
index a1debc89356..3c5045a206d 100644
--- a/drivers/watchdog/bcm63xx_wdt.c
+++ b/drivers/watchdog/bcm63xx_wdt.c
@@ -18,7 +18,6 @@
 #include <linux/miscdevice.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/reboot.h>
 #include <linux/types.h>
 #include <linux/uaccess.h>
 #include <linux/watchdog.h>
@@ -220,14 +219,6 @@ static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd,
 	}
 }
 
-static int bcm63xx_wdt_notify_sys(struct notifier_block *this,
-				unsigned long code, void *unused)
-{
-	if (code == SYS_DOWN || code == SYS_HALT)
-		bcm63xx_wdt_pause();
-	return NOTIFY_DONE;
-}
-
 static const struct file_operations bcm63xx_wdt_fops = {
 	.owner		= THIS_MODULE,
 	.llseek		= no_llseek,
@@ -243,12 +234,8 @@ static struct miscdevice bcm63xx_wdt_miscdev = {
 	.fops	= &bcm63xx_wdt_fops,
 };
 
-static struct notifier_block bcm63xx_wdt_notifier = {
-	.notifier_call = bcm63xx_wdt_notify_sys,
-};
 
-
-static int bcm63xx_wdt_probe(struct platform_device *pdev)
+static int __devinit bcm63xx_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct resource *r;
@@ -280,16 +267,10 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev)
 			wdt_time);
 	}
 
-	ret = register_reboot_notifier(&bcm63xx_wdt_notifier);
-	if (ret) {
-		dev_err(&pdev->dev, "failed to register reboot_notifier\n");
-		goto unregister_timer;
-	}
-
 	ret = misc_register(&bcm63xx_wdt_miscdev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to register watchdog device\n");
-		goto unregister_reboot_notifier;
+		goto unregister_timer;
 	}
 
 	dev_info(&pdev->dev, " started, timer margin: %d sec\n",
@@ -297,8 +278,6 @@ static int bcm63xx_wdt_probe(struct platform_device *pdev)
 
 	return 0;
 
-unregister_reboot_notifier:
-	unregister_reboot_notifier(&bcm63xx_wdt_notifier);
 unregister_timer:
 	bcm63xx_timer_unregister(TIMER_WDT_ID);
 unmap:
@@ -306,25 +285,28 @@ unmap:
 	return ret;
 }
 
-static int bcm63xx_wdt_remove(struct platform_device *pdev)
+static int __devexit bcm63xx_wdt_remove(struct platform_device *pdev)
 {
 	if (!nowayout)
 		bcm63xx_wdt_pause();
 
 	misc_deregister(&bcm63xx_wdt_miscdev);
-
-	iounmap(bcm63xx_wdt_device.regs);
-
-	unregister_reboot_notifier(&bcm63xx_wdt_notifier);
 	bcm63xx_timer_unregister(TIMER_WDT_ID);
-
+	iounmap(bcm63xx_wdt_device.regs);
 	return 0;
 }
 
+static void bcm63xx_wdt_shutdown(struct platform_device *pdev)
+{
+	bcm63xx_wdt_pause();
+}
+
 static struct platform_driver bcm63xx_wdt = {
 	.probe	= bcm63xx_wdt_probe,
-	.remove = bcm63xx_wdt_remove,
+	.remove = __devexit_p(bcm63xx_wdt_remove),
+	.shutdown = bcm63xx_wdt_shutdown,
 	.driver = {
+		.owner = THIS_MODULE,
 		.name = "bcm63xx-wdt",
 	}
 };
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index 9c21d19043a..f6bd6f10fce 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -30,6 +30,7 @@
 #include <linux/module.h>
 #include <linux/miscdevice.h>
 #include <linux/watchdog.h>
+#include <linux/fs.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/io.h>
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 3d77116e463..dea7b5bf6e2 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -642,19 +642,14 @@ static struct notifier_block die_notifier = {
  */
 
 #ifdef CONFIG_HPWDT_NMI_DECODING
-#ifdef ARCH_HAS_NMI_WATCHDOG
+#ifdef CONFIG_X86_LOCAL_APIC
 static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
 {
 	/*
 	 * If nmi_watchdog is turned off then we can turn on
 	 * our nmi decoding capability.
 	 */
-	if (!nmi_watchdog_active())
-		hpwdt_nmi_decoding = 1;
-	else
-		dev_warn(&dev->dev, "NMI decoding is disabled. To enable this "
-			"functionality you must reboot with nmi_watchdog=0 "
-			"and load the hpwdt driver with priority=1.\n");
+	hpwdt_nmi_decoding = 1;
 }
 #else
 static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
@@ -662,7 +657,7 @@ static void __devinit hpwdt_check_nmi_decoding(struct pci_dev *dev)
 	dev_warn(&dev->dev, "NMI decoding is disabled. "
 		"Your kernel does not support a NMI Watchdog.\n");
 }
-#endif /* ARCH_HAS_NMI_WATCHDOG */
+#endif /* CONFIG_X86_LOCAL_APIC */
 
 static int __devinit hpwdt_init_nmi_decoding(struct pci_dev *dev)
 {
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index f7e90fe47b7..b8838d2c67a 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -32,6 +32,7 @@
  *	document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
  *	document number 320066-003, 320257-008: EP80597 (IICH)
  *	document number TBD                   : Cougar Point (CPT)
+ *	document number TBD                   : Patsburg (PBG)
  */
 
 /*
@@ -146,7 +147,8 @@ enum iTCO_chipsets {
 	TCO_CPT29,	/* Cougar Point */
 	TCO_CPT30,	/* Cougar Point */
 	TCO_CPT31,	/* Cougar Point */
-	TCO_PBG,	/* Patsburg */
+	TCO_PBG1,	/* Patsburg */
+	TCO_PBG2,	/* Patsburg */
 };
 
 static struct {
@@ -235,6 +237,7 @@ static struct {
 	{"Cougar Point", 2},
 	{"Cougar Point", 2},
 	{"Patsburg", 2},
+	{"Patsburg", 2},
 	{NULL, 0}
 };
 
@@ -350,7 +353,8 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = {
 	{ ITCO_PCI_DEVICE(0x1c5d,				TCO_CPT29)},
 	{ ITCO_PCI_DEVICE(0x1c5e,				TCO_CPT30)},
 	{ ITCO_PCI_DEVICE(0x1c5f,				TCO_CPT31)},
-	{ ITCO_PCI_DEVICE(0x1d40,				TCO_PBG)},
+	{ ITCO_PCI_DEVICE(0x1d40,				TCO_PBG1)},
+	{ ITCO_PCI_DEVICE(0x1d41,				TCO_PBG2)},
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index 2ee7dac55a3..86f7cac1026 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -270,7 +270,7 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	imx2_wdt.clk = clk_get_sys("imx-wdt.0", NULL);
+	imx2_wdt.clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(imx2_wdt.clk)) {
 		dev_err(&pdev->dev, "can't get Watchdog clock\n");
 		return PTR_ERR(imx2_wdt.clk);
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
index 428f8a1583e..3939e53f5f9 100644
--- a/drivers/watchdog/rdc321x_wdt.c
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -231,7 +231,7 @@ static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
 	struct resource *r;
 	struct rdc321x_wdt_pdata *pdata;
 
-	pdata = pdev->dev.platform_data;
+	pdata = platform_get_drvdata(pdev);
 	if (!pdata) {
 		dev_err(&pdev->dev, "no platform data supplied\n");
 		return -ENODEV;
diff --git a/drivers/xen/Makefile b/drivers/xen/Makefile
index eb8a78d77d9..533a199e7a3 100644
--- a/drivers/xen/Makefile
+++ b/drivers/xen/Makefile
@@ -8,9 +8,12 @@ obj-$(CONFIG_BLOCK)		+= biomerge.o
 obj-$(CONFIG_HOTPLUG_CPU)	+= cpu_hotplug.o
 obj-$(CONFIG_XEN_XENCOMM)	+= xencomm.o
 obj-$(CONFIG_XEN_BALLOON)	+= balloon.o
-obj-$(CONFIG_XEN_DEV_EVTCHN)	+= evtchn.o
+obj-$(CONFIG_XEN_DEV_EVTCHN)	+= xen-evtchn.o
 obj-$(CONFIG_XENFS)		+= xenfs/
 obj-$(CONFIG_XEN_SYS_HYPERVISOR)	+= sys-hypervisor.o
 obj-$(CONFIG_XEN_PLATFORM_PCI)	+= platform-pci.o
 obj-$(CONFIG_SWIOTLB_XEN)	+= swiotlb-xen.o
 obj-$(CONFIG_XEN_DOM0)		+= pci.o
+
+xen-evtchn-y			:= evtchn.o
+
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index 500290b150b..43f9f02c7db 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -50,6 +50,7 @@
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
 #include <asm/tlb.h>
+#include <asm/e820.h>
 
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>
@@ -119,7 +120,7 @@ static void scrub_page(struct page *page)
 }
 
 /* balloon_append: add the given page to the balloon. */
-static void balloon_append(struct page *page)
+static void __balloon_append(struct page *page)
 {
 	/* Lowmem is re-populated first, so highmem pages go at list tail. */
 	if (PageHighMem(page)) {
@@ -130,7 +131,11 @@ static void balloon_append(struct page *page)
 		list_add(&page->lru, &ballooned_pages);
 		balloon_stats.balloon_low++;
 	}
+}
 
+static void balloon_append(struct page *page)
+{
+	__balloon_append(page);
 	totalram_pages--;
 }
 
@@ -191,7 +196,7 @@ static unsigned long current_target(void)
 
 static int increase_reservation(unsigned long nr_pages)
 {
-	unsigned long  pfn, i, flags;
+	unsigned long  pfn, i;
 	struct page   *page;
 	long           rc;
 	struct xen_memory_reservation reservation = {
@@ -203,8 +208,6 @@ static int increase_reservation(unsigned long nr_pages)
 	if (nr_pages > ARRAY_SIZE(frame_list))
 		nr_pages = ARRAY_SIZE(frame_list);
 
-	spin_lock_irqsave(&xen_reservation_lock, flags);
-
 	page = balloon_first_page();
 	for (i = 0; i < nr_pages; i++) {
 		BUG_ON(page == NULL);
@@ -247,14 +250,12 @@ static int increase_reservation(unsigned long nr_pages)
 	balloon_stats.current_pages += rc;
 
  out:
-	spin_unlock_irqrestore(&xen_reservation_lock, flags);
-
 	return rc < 0 ? rc : rc != nr_pages;
 }
 
 static int decrease_reservation(unsigned long nr_pages)
 {
-	unsigned long  pfn, i, flags;
+	unsigned long  pfn, i;
 	struct page   *page;
 	int            need_sleep = 0;
 	int ret;
@@ -292,8 +293,6 @@ static int decrease_reservation(unsigned long nr_pages)
 	kmap_flush_unused();
 	flush_tlb_all();
 
-	spin_lock_irqsave(&xen_reservation_lock, flags);
-
 	/* No more mappings: invalidate P2M and add to balloon. */
 	for (i = 0; i < nr_pages; i++) {
 		pfn = mfn_to_pfn(frame_list[i]);
@@ -308,8 +307,6 @@ static int decrease_reservation(unsigned long nr_pages)
 
 	balloon_stats.current_pages -= nr_pages;
 
-	spin_unlock_irqrestore(&xen_reservation_lock, flags);
-
 	return need_sleep;
 }
 
@@ -395,7 +392,7 @@ static struct notifier_block xenstore_notifier;
 
 static int __init balloon_init(void)
 {
-	unsigned long pfn;
+	unsigned long pfn, extra_pfn_end;
 	struct page *page;
 
 	if (!xen_pv_domain())
@@ -415,11 +412,24 @@ static int __init balloon_init(void)
 
 	register_balloon(&balloon_sysdev);
 
-	/* Initialise the balloon with excess memory space. */
-	for (pfn = xen_start_info->nr_pages; pfn < max_pfn; pfn++) {
+	/*
+	 * Initialise the balloon with excess memory space.  We need
+	 * to make sure we don't add memory which doesn't exist or
+	 * logically exist.  The E820 map can be trimmed to be smaller
+	 * than the amount of physical memory due to the mem= command
+	 * line parameter.  And if this is a 32-bit non-HIGHMEM kernel
+	 * on a system with memory which requires highmem to access,
+	 * don't try to use it.
+	 */
+	extra_pfn_end = min(min(max_pfn, e820_end_of_ram_pfn()),
+			    (unsigned long)PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size));
+	for (pfn = PFN_UP(xen_extra_mem_start);
+	     pfn < extra_pfn_end;
+	     pfn++) {
 		page = pfn_to_page(pfn);
-		if (!PageReserved(page))
-			balloon_append(page);
+		/* totalram_pages doesn't include the boot-time
+		   balloon extension, so don't subtract from it. */
+		__balloon_append(page);
 	}
 
 	target_watch.callback = watch_target;
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 97612f548a8..65f8637d13c 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -105,7 +105,6 @@ struct irq_info
 
 static struct irq_info *irq_info;
 static int *pirq_to_irq;
-static int nr_pirqs;
 
 static int *evtchn_to_irq;
 struct cpu_evtchn_s {
@@ -278,17 +277,17 @@ static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu)
 	cpumask_copy(irq_to_desc(irq)->affinity, cpumask_of(cpu));
 #endif
 
-	__clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq)));
-	__set_bit(chn, cpu_evtchn_mask(cpu));
+	clear_bit(chn, cpu_evtchn_mask(cpu_from_irq(irq)));
+	set_bit(chn, cpu_evtchn_mask(cpu));
 
 	irq_info[irq].cpu = cpu;
 }
 
 static void init_evtchn_cpu_bindings(void)
 {
+	int i;
 #ifdef CONFIG_SMP
 	struct irq_desc *desc;
-	int i;
 
 	/* By default all event channels notify CPU#0. */
 	for_each_irq_desc(i, desc) {
@@ -296,7 +295,10 @@ static void init_evtchn_cpu_bindings(void)
 	}
 #endif
 
-	memset(cpu_evtchn_mask(0), ~0, sizeof(struct cpu_evtchn_s));
+	for_each_possible_cpu(i)
+		memset(cpu_evtchn_mask(i),
+		       (i == 0) ? ~0 : 0, sizeof(struct cpu_evtchn_s));
+
 }
 
 static inline void clear_evtchn(int port)
@@ -353,7 +355,7 @@ static void unmask_evtchn(int port)
 		struct evtchn_unmask unmask = { .port = port };
 		(void)HYPERVISOR_event_channel_op(EVTCHNOP_unmask, &unmask);
 	} else {
-		struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu);
+		struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu);
 
 		sync_clear_bit(port, &s->evtchn_mask[0]);
 
@@ -382,12 +384,17 @@ static int get_nr_hw_irqs(void)
 	return ret;
 }
 
-/* callers of this function should make sure that PHYSDEVOP_get_nr_pirqs
- * succeeded otherwise nr_pirqs won't hold the right value */
-static int find_unbound_pirq(void)
+static int find_unbound_pirq(int type)
 {
-	int i;
-	for (i = nr_pirqs-1; i >= 0; i--) {
+	int rc, i;
+	struct physdev_get_free_pirq op_get_free_pirq;
+	op_get_free_pirq.type = type;
+
+	rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_free_pirq, &op_get_free_pirq);
+	if (!rc)
+		return op_get_free_pirq.pirq;
+
+	for (i = 0; i < nr_irqs; i++) {
 		if (pirq_to_irq[i] < 0)
 			return i;
 	}
@@ -420,7 +427,7 @@ static int find_unbound_irq(void)
 	if (irq == start)
 		goto no_irqs;
 
-	res = irq_alloc_desc_at(irq, 0);
+	res = irq_alloc_desc_at(irq, -1);
 
 	if (WARN_ON(res != irq))
 		return -1;
@@ -608,10 +615,10 @@ int xen_map_pirq_gsi(unsigned pirq, unsigned gsi, int shareable, char *name)
 
 	spin_lock(&irq_mapping_update_lock);
 
-	if ((pirq > nr_pirqs) || (gsi > nr_irqs)) {
+	if ((pirq > nr_irqs) || (gsi > nr_irqs)) {
 		printk(KERN_WARNING "xen_map_pirq_gsi: %s %s is incorrect!\n",
-			pirq > nr_pirqs ? "nr_pirqs" :"",
-			gsi > nr_irqs ? "nr_irqs" : "");
+			pirq > nr_irqs ? "pirq" :"",
+			gsi > nr_irqs ? "gsi" : "");
 		goto out;
 	}
 
@@ -627,7 +634,7 @@ int xen_map_pirq_gsi(unsigned pirq, unsigned gsi, int shareable, char *name)
 	if (identity_mapped_irq(gsi) || (!xen_initial_domain() &&
 				xen_pv_domain())) {
 		irq = gsi;
-		irq_alloc_desc_at(irq, 0);
+		irq_alloc_desc_at(irq, -1);
 	} else
 		irq = find_unbound_irq();
 
@@ -661,17 +668,21 @@ out:
 #include <linux/msi.h>
 #include "../pci/msi.h"
 
-void xen_allocate_pirq_msi(char *name, int *irq, int *pirq)
+void xen_allocate_pirq_msi(char *name, int *irq, int *pirq, int alloc)
 {
 	spin_lock(&irq_mapping_update_lock);
 
-	*irq = find_unbound_irq();
-	if (*irq == -1)
-		goto out;
+	if (alloc & XEN_ALLOC_IRQ) {
+		*irq = find_unbound_irq();
+		if (*irq == -1)
+			goto out;
+	}
 
-	*pirq = find_unbound_pirq();
-	if (*pirq == -1)
-		goto out;
+	if (alloc & XEN_ALLOC_PIRQ) {
+		*pirq = find_unbound_pirq(MAP_PIRQ_TYPE_MSI);
+		if (*pirq == -1)
+			goto out;
+	}
 
 	set_irq_chip_and_handler_name(*irq, &xen_pirq_chip,
 				      handle_level_irq, name);
@@ -752,13 +763,14 @@ int xen_destroy_irq(int irq)
 		goto out;
 
 	if (xen_initial_domain()) {
-		unmap_irq.pirq = info->u.pirq.gsi;
+		unmap_irq.pirq = info->u.pirq.pirq;
 		unmap_irq.domid = DOMID_SELF;
 		rc = HYPERVISOR_physdev_op(PHYSDEVOP_unmap_pirq, &unmap_irq);
 		if (rc) {
 			printk(KERN_WARNING "unmap irq failed %d\n", rc);
 			goto out;
 		}
+		pirq_to_irq[info->u.pirq.pirq] = -1;
 	}
 	irq_info[irq] = mk_unbound_info();
 
@@ -779,6 +791,11 @@ int xen_gsi_from_irq(unsigned irq)
 	return gsi_from_irq(irq);
 }
 
+int xen_irq_from_pirq(unsigned pirq)
+{
+	return pirq_to_irq[pirq];
+}
+
 int bind_evtchn_to_irq(unsigned int evtchn)
 {
 	int irq;
@@ -1084,7 +1101,7 @@ static void __xen_evtchn_do_upcall(void)
 {
 	int cpu = get_cpu();
 	struct shared_info *s = HYPERVISOR_shared_info;
-	struct vcpu_info *vcpu_info = __get_cpu_var(xen_vcpu);
+	struct vcpu_info *vcpu_info = __this_cpu_read(xen_vcpu);
  	unsigned count;
 
 	do {
@@ -1092,7 +1109,7 @@ static void __xen_evtchn_do_upcall(void)
 
 		vcpu_info->evtchn_upcall_pending = 0;
 
-		if (__get_cpu_var(xed_nesting_count)++)
+		if (__this_cpu_inc_return(xed_nesting_count) - 1)
 			goto out;
 
 #ifndef CONFIG_X86 /* No need for a barrier -- XCHG is a barrier on x86. */
@@ -1124,8 +1141,8 @@ static void __xen_evtchn_do_upcall(void)
 
 		BUG_ON(!irqs_disabled());
 
-		count = __get_cpu_var(xed_nesting_count);
-		__get_cpu_var(xed_nesting_count) = 0;
+		count = __this_cpu_read(xed_nesting_count);
+		__this_cpu_write(xed_nesting_count, 0);
 	} while (count != 1 || vcpu_info->evtchn_upcall_pending);
 
 out:
@@ -1276,6 +1293,42 @@ static int retrigger_dynirq(unsigned int irq)
 	return ret;
 }
 
+static void restore_cpu_pirqs(void)
+{
+	int pirq, rc, irq, gsi;
+	struct physdev_map_pirq map_irq;
+
+	for (pirq = 0; pirq < nr_irqs; pirq++) {
+		irq = pirq_to_irq[pirq];
+		if (irq == -1)
+			continue;
+
+		/* save/restore of PT devices doesn't work, so at this point the
+		 * only devices present are GSI based emulated devices */
+		gsi = gsi_from_irq(irq);
+		if (!gsi)
+			continue;
+
+		map_irq.domid = DOMID_SELF;
+		map_irq.type = MAP_PIRQ_TYPE_GSI;
+		map_irq.index = gsi;
+		map_irq.pirq = pirq;
+
+		rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
+		if (rc) {
+			printk(KERN_WARNING "xen map irq failed gsi=%d irq=%d pirq=%d rc=%d\n",
+					gsi, irq, pirq, rc);
+			irq_info[irq] = mk_unbound_info();
+			pirq_to_irq[pirq] = -1;
+			continue;
+		}
+
+		printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq);
+
+		startup_pirq(irq);
+	}
+}
+
 static void restore_cpu_virqs(unsigned int cpu)
 {
 	struct evtchn_bind_virq bind_virq;
@@ -1299,9 +1352,6 @@ static void restore_cpu_virqs(unsigned int cpu)
 		evtchn_to_irq[evtchn] = irq;
 		irq_info[irq] = mk_virq_info(evtchn, virq);
 		bind_evtchn_to_cpu(evtchn, cpu);
-
-		/* Ready for use. */
-		unmask_evtchn(evtchn);
 	}
 }
 
@@ -1327,10 +1377,6 @@ static void restore_cpu_ipis(unsigned int cpu)
 		evtchn_to_irq[evtchn] = irq;
 		irq_info[irq] = mk_ipi_info(evtchn, ipi);
 		bind_evtchn_to_cpu(evtchn, cpu);
-
-		/* Ready for use. */
-		unmask_evtchn(evtchn);
-
 	}
 }
 
@@ -1390,6 +1436,7 @@ void xen_poll_irq(int irq)
 void xen_irq_resume(void)
 {
 	unsigned int cpu, irq, evtchn;
+	struct irq_desc *desc;
 
 	init_evtchn_cpu_bindings();
 
@@ -1408,6 +1455,25 @@ void xen_irq_resume(void)
 		restore_cpu_virqs(cpu);
 		restore_cpu_ipis(cpu);
 	}
+
+	/*
+	 * Unmask any IRQF_NO_SUSPEND IRQs which are enabled. These
+	 * are not handled by the IRQ core.
+	 */
+	for_each_irq_desc(irq, desc) {
+		if (!desc->action || !(desc->action->flags & IRQF_NO_SUSPEND))
+			continue;
+		if (desc->status & IRQ_DISABLED)
+			continue;
+
+		evtchn = evtchn_from_irq(irq);
+		if (evtchn == -1)
+			continue;
+
+		unmask_evtchn(evtchn);
+	}
+
+	restore_cpu_pirqs();
 }
 
 static struct irq_chip xen_dynamic_chip __read_mostly = {
@@ -1492,26 +1558,17 @@ void xen_callback_vector(void) {}
 
 void __init xen_init_IRQ(void)
 {
-	int i, rc;
-	struct physdev_nr_pirqs op_nr_pirqs;
+	int i;
 
 	cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s),
 				    GFP_KERNEL);
 	irq_info = kcalloc(nr_irqs, sizeof(*irq_info), GFP_KERNEL);
 
-	rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_nr_pirqs, &op_nr_pirqs);
-	if (rc < 0) {
-		nr_pirqs = nr_irqs;
-		if (rc != -ENOSYS)
-			printk(KERN_WARNING "PHYSDEVOP_get_nr_pirqs returned rc=%d\n", rc);
-	} else {
-		if (xen_pv_domain() && !xen_initial_domain())
-			nr_pirqs = max((int)op_nr_pirqs.nr_pirqs, nr_irqs);
-		else
-			nr_pirqs = op_nr_pirqs.nr_pirqs;
-	}
-	pirq_to_irq = kcalloc(nr_pirqs, sizeof(*pirq_to_irq), GFP_KERNEL);
-	for (i = 0; i < nr_pirqs; i++)
+	/* We are using nr_irqs as the maximum number of pirq available but
+	 * that number is actually chosen by Xen and we don't know exactly
+	 * what it is. Be careful choosing high pirq numbers. */
+	pirq_to_irq = kcalloc(nr_irqs, sizeof(*pirq_to_irq), GFP_KERNEL);
+	for (i = 0; i < nr_irqs; i++)
 		pirq_to_irq[i] = -1;
 
 	evtchn_to_irq = kcalloc(NR_EVENT_CHANNELS, sizeof(*evtchn_to_irq),
diff --git a/drivers/xen/evtchn.c b/drivers/xen/evtchn.c
index fec6ba3c08a..ef11daf0caf 100644
--- a/drivers/xen/evtchn.c
+++ b/drivers/xen/evtchn.c
@@ -69,20 +69,51 @@ struct per_user_data {
 	const char *name;
 };
 
-/* Who's bound to each port? */
-static struct per_user_data *port_user[NR_EVENT_CHANNELS];
+/*
+ * Who's bound to each port?  This is logically an array of struct
+ * per_user_data *, but we encode the current enabled-state in bit 0.
+ */
+static unsigned long *port_user;
 static DEFINE_SPINLOCK(port_user_lock); /* protects port_user[] and ring_prod */
 
-irqreturn_t evtchn_interrupt(int irq, void *data)
+static inline struct per_user_data *get_port_user(unsigned port)
+{
+	return (struct per_user_data *)(port_user[port] & ~1);
+}
+
+static inline void set_port_user(unsigned port, struct per_user_data *u)
+{
+	port_user[port] = (unsigned long)u;
+}
+
+static inline bool get_port_enabled(unsigned port)
+{
+	return port_user[port] & 1;
+}
+
+static inline void set_port_enabled(unsigned port, bool enabled)
+{
+	if (enabled)
+		port_user[port] |= 1;
+	else
+		port_user[port] &= ~1;
+}
+
+static irqreturn_t evtchn_interrupt(int irq, void *data)
 {
 	unsigned int port = (unsigned long)data;
 	struct per_user_data *u;
 
 	spin_lock(&port_user_lock);
 
-	u = port_user[port];
+	u = get_port_user(port);
+
+	WARN(!get_port_enabled(port),
+	     "Interrupt for port %d, but apparently not enabled; per-user %p\n",
+	     port, u);
 
 	disable_irq_nosync(irq);
+	set_port_enabled(port, false);
 
 	if ((u->ring_prod - u->ring_cons) < EVTCHN_RING_SIZE) {
 		u->ring[EVTCHN_RING_MASK(u->ring_prod)] = port;
@@ -92,9 +123,8 @@ irqreturn_t evtchn_interrupt(int irq, void *data)
 			kill_fasync(&u->evtchn_async_queue,
 				    SIGIO, POLL_IN);
 		}
-	} else {
+	} else
 		u->ring_overflow = 1;
-	}
 
 	spin_unlock(&port_user_lock);
 
@@ -198,9 +228,18 @@ static ssize_t evtchn_write(struct file *file, const char __user *buf,
 		goto out;
 
 	spin_lock_irq(&port_user_lock);
-	for (i = 0; i < (count/sizeof(evtchn_port_t)); i++)
-		if ((kbuf[i] < NR_EVENT_CHANNELS) && (port_user[kbuf[i]] == u))
-			enable_irq(irq_from_evtchn(kbuf[i]));
+
+	for (i = 0; i < (count/sizeof(evtchn_port_t)); i++) {
+		unsigned port = kbuf[i];
+
+		if (port < NR_EVENT_CHANNELS &&
+		    get_port_user(port) == u &&
+		    !get_port_enabled(port)) {
+			set_port_enabled(port, true);
+			enable_irq(irq_from_evtchn(port));
+		}
+	}
+
 	spin_unlock_irq(&port_user_lock);
 
 	rc = count;
@@ -222,8 +261,9 @@ static int evtchn_bind_to_user(struct per_user_data *u, int port)
 	 * interrupt handler yet, and our caller has already
 	 * serialized bind operations.)
 	 */
-	BUG_ON(port_user[port] != NULL);
-	port_user[port] = u;
+	BUG_ON(get_port_user(port) != NULL);
+	set_port_user(port, u);
+	set_port_enabled(port, true); /* start enabled */
 
 	rc = bind_evtchn_to_irqhandler(port, evtchn_interrupt, IRQF_DISABLED,
 				       u->name, (void *)(unsigned long)port);
@@ -239,10 +279,7 @@ static void evtchn_unbind_from_user(struct per_user_data *u, int port)
 
 	unbind_from_irqhandler(irq, (void *)(unsigned long)port);
 
-	/* make sure we unbind the irq handler before clearing the port */
-	barrier();
-
-	port_user[port] = NULL;
+	set_port_user(port, NULL);
 }
 
 static long evtchn_ioctl(struct file *file,
@@ -333,15 +370,17 @@ static long evtchn_ioctl(struct file *file,
 		spin_lock_irq(&port_user_lock);
 
 		rc = -ENOTCONN;
-		if (port_user[unbind.port] != u) {
+		if (get_port_user(unbind.port) != u) {
 			spin_unlock_irq(&port_user_lock);
 			break;
 		}
 
-		evtchn_unbind_from_user(u, unbind.port);
+		disable_irq(irq_from_evtchn(unbind.port));
 
 		spin_unlock_irq(&port_user_lock);
 
+		evtchn_unbind_from_user(u, unbind.port);
+
 		rc = 0;
 		break;
 	}
@@ -355,7 +394,7 @@ static long evtchn_ioctl(struct file *file,
 
 		if (notify.port >= NR_EVENT_CHANNELS) {
 			rc = -EINVAL;
-		} else if (port_user[notify.port] != u) {
+		} else if (get_port_user(notify.port) != u) {
 			rc = -ENOTCONN;
 		} else {
 			notify_remote_via_evtchn(notify.port);
@@ -431,7 +470,7 @@ static int evtchn_open(struct inode *inode, struct file *filp)
 
 	filp->private_data = u;
 
-	return 0;
+	return nonseekable_open(inode, filp);;
 }
 
 static int evtchn_release(struct inode *inode, struct file *filp)
@@ -444,14 +483,21 @@ static int evtchn_release(struct inode *inode, struct file *filp)
 	free_page((unsigned long)u->ring);
 
 	for (i = 0; i < NR_EVENT_CHANNELS; i++) {
-		if (port_user[i] != u)
+		if (get_port_user(i) != u)
 			continue;
 
-		evtchn_unbind_from_user(port_user[i], i);
+		disable_irq(irq_from_evtchn(i));
 	}
 
 	spin_unlock_irq(&port_user_lock);
 
+	for (i = 0; i < NR_EVENT_CHANNELS; i++) {
+		if (get_port_user(i) != u)
+			continue;
+
+		evtchn_unbind_from_user(get_port_user(i), i);
+	}
+
 	kfree(u->name);
 	kfree(u);
 
@@ -467,12 +513,12 @@ static const struct file_operations evtchn_fops = {
 	.fasync  = evtchn_fasync,
 	.open    = evtchn_open,
 	.release = evtchn_release,
-	.llseek = noop_llseek,
+	.llseek	 = no_llseek,
 };
 
 static struct miscdevice evtchn_miscdev = {
 	.minor        = MISC_DYNAMIC_MINOR,
-	.name         = "evtchn",
+	.name         = "xen/evtchn",
 	.fops         = &evtchn_fops,
 };
 static int __init evtchn_init(void)
@@ -482,8 +528,11 @@ static int __init evtchn_init(void)
 	if (!xen_domain())
 		return -ENODEV;
 
+	port_user = kcalloc(NR_EVENT_CHANNELS, sizeof(*port_user), GFP_KERNEL);
+	if (port_user == NULL)
+		return -ENOMEM;
+
 	spin_lock_init(&port_user_lock);
-	memset(port_user, 0, sizeof(port_user));
 
 	/* Create '/dev/misc/evtchn'. */
 	err = misc_register(&evtchn_miscdev);
@@ -499,6 +548,9 @@ static int __init evtchn_init(void)
 
 static void __exit evtchn_cleanup(void)
 {
+	kfree(port_user);
+	port_user = NULL;
+
 	misc_deregister(&evtchn_miscdev);
 }
 
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index ef9c7db5207..db8c4c4ac88 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -49,6 +49,7 @@ static int xen_hvm_suspend(void *data)
 
 	if (!*cancelled) {
 		xen_irq_resume();
+		xen_console_resume();
 		xen_timer_resume();
 	}
 
diff --git a/drivers/xen/xenfs/privcmd.c b/drivers/xen/xenfs/privcmd.c
index f80be7f6eb9..dbd3b16fd13 100644
--- a/drivers/xen/xenfs/privcmd.c
+++ b/drivers/xen/xenfs/privcmd.c
@@ -15,7 +15,6 @@
 #include <linux/mman.h>
 #include <linux/uaccess.h>
 #include <linux/swap.h>
-#include <linux/smp_lock.h>
 #include <linux/highmem.h>
 #include <linux/pagemap.h>
 #include <linux/seq_file.h>
@@ -266,9 +265,7 @@ static int mmap_return_errors(void *data, void *state)
 	xen_pfn_t *mfnp = data;
 	struct mmap_batch_state *st = state;
 
-	put_user(*mfnp, st->user++);
-
-	return 0;
+	return put_user(*mfnp, st->user++);
 }
 
 static struct vm_operations_struct privcmd_vm_ops;
@@ -323,10 +320,8 @@ static long privcmd_ioctl_mmap_batch(void __user *udata)
 	up_write(&mm->mmap_sem);
 
 	if (state.err > 0) {
-		ret = 0;
-
 		state.user = m.arr;
-		traverse_pages(m.num, sizeof(xen_pfn_t),
+		ret = traverse_pages(m.num, sizeof(xen_pfn_t),
 			       &pagelist,
 			       mmap_return_errors, &state);
 	}
@@ -384,8 +379,9 @@ static int privcmd_mmap(struct file *file, struct vm_area_struct *vma)
 	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return -ENOSYS;
 
-	/* DONTCOPY is essential for Xen as copy_page_range is broken. */
-	vma->vm_flags |= VM_RESERVED | VM_IO | VM_DONTCOPY;
+	/* DONTCOPY is essential for Xen because copy_page_range doesn't know
+	 * how to recreate these mappings */
+	vma->vm_flags |= VM_RESERVED | VM_IO | VM_DONTCOPY | VM_PFNMAP;
 	vma->vm_ops = &privcmd_vm_ops;
 	vma->vm_private_data = NULL;
 
diff --git a/drivers/xen/xenfs/super.c b/drivers/xen/xenfs/super.c
index f6339d11d59..1aa38971984 100644
--- a/drivers/xen/xenfs/super.c
+++ b/drivers/xen/xenfs/super.c
@@ -12,8 +12,6 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/magic.h>
-#include <linux/mm.h>
-#include <linux/backing-dev.h>
 
 #include <xen/xen.h>
 
@@ -24,28 +22,12 @@
 MODULE_DESCRIPTION("Xen filesystem");
 MODULE_LICENSE("GPL");
 
-static int xenfs_set_page_dirty(struct page *page)
-{
-	return !TestSetPageDirty(page);
-}
-
-static const struct address_space_operations xenfs_aops = {
-	.set_page_dirty = xenfs_set_page_dirty,
-};
-
-static struct backing_dev_info xenfs_backing_dev_info = {
-	.ra_pages	= 0,	/* No readahead */
-	.capabilities	= BDI_CAP_NO_ACCT_AND_WRITEBACK,
-};
-
 static struct inode *xenfs_make_inode(struct super_block *sb, int mode)
 {
 	struct inode *ret = new_inode(sb);
 
 	if (ret) {
 		ret->i_mode = mode;
-		ret->i_mapping->a_ops = &xenfs_aops;
-		ret->i_mapping->backing_dev_info = &xenfs_backing_dev_info;
 		ret->i_uid = ret->i_gid = 0;
 		ret->i_blocks = 0;
 		ret->i_atime = ret->i_mtime = ret->i_ctime = CURRENT_TIME;
@@ -121,9 +103,9 @@ static int xenfs_fill_super(struct super_block *sb, void *data, int silent)
 	return rc;
 }
 
-static int xenfs_mount(struct file_system_type *fs_type,
-			int flags, const char *dev_name,
-			void *data)
+static struct dentry *xenfs_mount(struct file_system_type *fs_type,
+				  int flags, const char *dev_name,
+				  void *data)
 {
 	return mount_single(fs_type, flags, data, xenfs_fill_super);
 }
@@ -137,25 +119,11 @@ static struct file_system_type xenfs_type = {
 
 static int __init xenfs_init(void)
 {
-	int err;
-	if (!xen_domain()) {
-		printk(KERN_INFO "xenfs: not registering filesystem on non-xen platform\n");
-		return 0;
-	}
-
-	err = register_filesystem(&xenfs_type);
-	if (err) {
-		printk(KERN_ERR "xenfs: Unable to register filesystem!\n");
-		goto out;
-	}
-
-	err = bdi_init(&xenfs_backing_dev_info);
-	if (err)
-		unregister_filesystem(&xenfs_type);
-
- out:
+	if (xen_domain())
+		return register_filesystem(&xenfs_type);
 
-	return err;
+	printk(KERN_INFO "XENFS: not registering filesystem on non-xen platform\n");
+	return 0;
 }
 
 static void __exit xenfs_exit(void)
diff --git a/drivers/zorro/proc.c b/drivers/zorro/proc.c
index cafc5045429..e0c84725d3e 100644
--- a/drivers/zorro/proc.c
+++ b/drivers/zorro/proc.c
@@ -13,7 +13,6 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <asm/uaccess.h>
 #include <asm/amigahw.h>
 #include <asm/setup.h>
diff --git a/firmware/Makefile b/firmware/Makefile
index 74d47cd0886..0a9d1e28ad2 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,13 +32,13 @@ fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
 					 adaptec/starfire_tx.bin
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
-fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.0.34.0.fw \
-			      bnx2x/bnx2x-e1h-6.0.34.0.fw \
-			      bnx2x/bnx2x-e2-6.0.34.0.fw
-fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.0.17.fw \
+fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.2.5.0.fw \
+			      bnx2x/bnx2x-e1h-6.2.5.0.fw \
+			      bnx2x/bnx2x-e2-6.2.5.0.fw
+fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1.fw \
 			     bnx2/bnx2-rv2p-09-6.0.17.fw \
 			     bnx2/bnx2-rv2p-09ax-6.0.17.fw \
-			     bnx2/bnx2-mips-06-6.0.15.fw \
+			     bnx2/bnx2-mips-06-6.2.1.fw \
 			     bnx2/bnx2-rv2p-06-6.0.15.fw
 fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
 fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
diff --git a/firmware/WHENCE b/firmware/WHENCE
index f22c4dfd073..14aaee85d06 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -699,9 +699,9 @@ Found in hex form in kernel source.
 
 Driver: BNX2 - Broadcom NetXtremeII
 
-File: bnx2/bnx2-mips-06-6.0.15.fw
+File: bnx2/bnx2-mips-06-6.2.1.fw
 File: bnx2/bnx2-rv2p-06-6.0.15.fw
-File: bnx2/bnx2-mips-09-6.0.17.fw
+File: bnx2/bnx2-mips-09-6.2.1.fw
 File: bnx2/bnx2-rv2p-09-6.0.17.fw
 File: bnx2/bnx2-rv2p-09ax-6.0.17.fw
 
diff --git a/firmware/bnx2/bnx2-mips-06-6.0.15.fw.ihex b/firmware/bnx2/bnx2-mips-06-6.2.1.fw.ihex
index e9bbdc3b039..4c43b26af0a 100644
--- a/firmware/bnx2/bnx2-mips-06-6.0.15.fw.ihex
+++ b/firmware/bnx2/bnx2-mips-06-6.2.1.fw.ihex
@@ -1,19 +1,19 @@
 :10000000080001180800000000004A68000000C84D
 :1000100000000000000000000000000008004A6826
 :100020000000001400004B30080000A00800000091
-:100030000000568800004B4408005800000000846F
-:100040000000A1CC08005688000001580000A25012
-:100050000800321008000000000072D00000A3A8C1
+:100030000000569400004B44080058200000008443
+:100040000000A1D808005694000001580000A25CEE
+:100050000800321008000000000072D00000A3B4B5
 :10006000000000000000000000000000080072D046
-:100070000000002400011678080004900800040025
-:10008000000017D40001169C0000000000000000D2
+:100070000000002400011684080004900800040019
+:10008000000017D4000116A80000000000000000C6
 :100090000000000000000000000000000000000060
-:1000A000080000A80800000000003BFC00012E70C2
+:1000A000080000A80800000000003BFC00012E7CB6
 :1000B0000000000000000000000000000000000040
 :0800C000000000000000000038
 :0800C8000A00004600000000E0
-:1000D000000000000000000D636F6D362E302E31E1
-:1000E0003500000006000F020000000000000003C1
+:1000D000000000000000000D636F6D362E322E31DF
+:1000E0000000000006020102000000000000000302
 :1000F000000000C800000032000000030000000003
 :1001000000000000000000000000000000000000EF
 :1001100000000010000001360000EA600000000549
@@ -1205,8 +1205,8 @@
 :104B300008000ACC08000B1408000B9808000BE4CE
 :044B400008000C203D
 :0C4B44000A000028000000000000000033
-:104B50000000000D6370362E302E3135000000004D
-:104B600006000F040000000000000000000000002C
+:104B50000000000D6370362E322E31000000000080
+:104B60000602010400000000000000000000000038
 :104B70000000000000000000000000000000000035
 :104B80000000000000000000000000000000002005
 :104B90000000000000000000000000000000000015
@@ -1215,11 +1215,11 @@
 :104BC0000000002B000000000000000400030D4066
 :104BD00000000000000000000000000000000000D5
 :104BE00000000000000000001000000300000000B2
-:104BF0000000000D0000000D3C0208002442588413
-:104C00003C03080024635F50AC4000000043202BAD
+:104BF0000000000D0000000D3C020800244258A4F3
+:104C00003C03080024635F70AC4000000043202B8D
 :104C10001480FFFD244200043C1D080037BD7FFCCA
 :104C200003A0F0213C100800261000A03C1C080046
-:104C3000279C58840E0001AC000000000000000D0D
+:104C3000279C58A40E0001AC000000000000000DED
 :104C400027BDFFE83C096018AFBF00108D2C500055
 :104C5000240DFF7F24080031018D5824356A380C5B
 :104C600024070C003C1A8000AD2A50003C04800A46
@@ -1303,13 +1303,13 @@
 :105140008FB600288FB500248FB400208FB3001CC9
 :105150008FB200188FB100148FB0001003E0000868
 :1051600027BD0038107E001B000000001477FFCC24
-:10517000241000010E001598000000008F83001419
+:10517000241000010E00159B000000008F83001416
 :105180001060FFCB0230F823029158238F87001064
 :10519000017020210A0001973093FFFF8F830014D4
 :1051A0001460FFCB3C110020AF5100300A000163B6
 :1051B000000000000E00077D024028210A00015770
 :1051C000004080210E00033A024028210A000157C6
-:1051D000004080210E001460022020210A000157A7
+:1051D000004080210E001463022020210A000157A4
 :1051E000004080210E0000CD000000000A0001797F
 :1051F00002D3382327BDFFE8AFB00010AFBF0014C3
 :105200000E00003F000000003C028000345000709F
@@ -1321,7 +1321,7 @@
 :10526000AF8700A83C010800AC2400380E000106FE
 :10527000000000003C0308008C6300701060FFE633
 :10528000006020213C0508008CA500683C06080051
-:105290008CC6006C0E001527000000003C010800C1
+:105290008CC6006C0E00152A000000003C010800BE
 :1052A000AC2000708F4F000039EE000131C20001C8
 :1052B0001440FFDE8F8600A88E0A00008F8B00A8A6
 :1052C0003C0508008CA5003C3C0408008C84003898
@@ -1349,10 +1349,10 @@
 :105420000080382130A5FFFF000020210A00022A59
 :10543000240600803087FFFF8CA40000240600387B
 :105440000A00022A000028218F8300388F8600304E
-:105450001066000B008040213C07080024E759F843
+:105450001066000B008040213C07080024E75A1822
 :10546000000328C000A710218C4400002463000121
 :10547000108800053063000F5466FFFA000328C04F
-:1054800003E00008000010213C07080024E759FC55
+:1054800003E00008000010213C07080024E75A1C34
 :1054900000A7302103E000088CC200003C0390000C
 :1054A0003462000100822025AF4400208F45002097
 :1054B00004A0FFFE0000000003E000080000000060
@@ -1417,7 +1417,7 @@
 :105860008E0300003C0680002402004000033E023C
 :1058700000032C0230E4007F006688241482001D9F
 :1058800030A500FF8F8300282C68000A510000100B
-:105890008F910014000358803C0C0800258C56881A
+:105890008F910014000358803C0C0800258C56940E
 :1058A000016C50218D49000001200008000000001B
 :1058B00002B210213045FFFF0E000236240400849E
 :1058C000162000028F90001CAF8000288F910014DA
@@ -1440,23 +1440,23 @@
 :1059D000AF6B006C9208000CA3680036937F003E0A
 :1059E00037F90020A379003E8F78007403058024E6
 :1059F000360F4000AF6F007493640000308900FFE1
-:105A0000513402452404FF803C04080024845A7861
-:105A10000E00028D000000003C1008008E105A7825
+:105A0000513402452404FF803C04080024845A9841
+:105A10000E00028D000000003C1008008E105A9805
 :105A20000E00025602002021240600042407000173
 :105A3000A366007D020020210E00025FA36700051F
 :105A40008F5F017807E0FFFE240B0002AF5001409A
 :105A5000A34B01448F90001C3C081000AF48017814
 :105A60000A000362AF8000282CAD003751A0FF98D8
-:105A70008F9100140005A0803C180800271856B02C
+:105A70008F9100140005A0803C180800271856BC20
 :105A8000029878218DEE000001C00008000000009F
 :105A90002418000614B80011000000003C0808009B
-:105AA0008D085A7824040005AF4800208E1F001886
+:105AA0008D085A9824040005AF4800208E1F001866
 :105AB000AF7F00188F79004CAF79001C8F650050C4
 :105AC000122000C0AF6500700A000362AF84002896
 :105AD0002406000710A60083240300063C050800E6
-:105AE00024A55A780E000264240400818F90001CC3
+:105AE00024A55A980E000264240400818F90001CA3
 :105AF0000011102B0A000362AF8200282407000463
-:105B000014A7FFF6240500503C1808008F185A7897
+:105B000014A7FFF6240500503C1808008F185A9877
 :105B1000AF5800208E0F0008AF6F00408E090008BC
 :105B2000AF6900448E14000CAF7400488E0E001054
 :105B3000AF6E004C8E0D0010AF6D00848E0A001405
@@ -1464,10 +1464,10 @@
 :105B5000AF64005893630000306B00FF116501D8FB
 :105B6000000000008F7400488F6900400289702394
 :105B700005C000042404008C1620FFDE240200036C
-:105B8000240400823C05080024A55A780E000287F0
+:105B8000240400823C05080024A55A980E000287D0
 :105B9000000000008F90001C000010210A0003622A
 :105BA000AF820028240F000514AFFFCC240520008D
-:105BB0003C0708008CE75A78AF4700208E060004A7
+:105BB0003C0708008CE75A98AF4700208E06000487
 :105BC000AF66005C9208000824100008A36800215A
 :105BD0008F9F001C93F90009A37900208F86001C79
 :105BE00090D8000A330400FF10900011000000005C
@@ -1486,21 +1486,21 @@
 :105CB000AF62006C9167000EA367003E9368003EE0
 :105CC0000106F8241220014BA37F003E8F90001C98
 :105CD0000A000362AF8500282407002214A7FF7F73
-:105CE000240300073C0B08008D6B5A781220000C2F
+:105CE000240300073C0B08008D6B5A981220000C0F
 :105CF000AF4B00200A000362AF830028240C00335E
-:105D000010AC0014240A00283C05080024A55A7889
+:105D000010AC0014240A00283C05080024A55A9869
 :105D10000E00023C240400810A0003EB8F90001C5B
-:105D20003C04080024845A780E00028D0000000014
+:105D20003C04080024845A980E00028D00000000F4
 :105D30009363000024110050306200FF10510135C0
 :105D4000000000008F90001C000018210A00036270
-:105D5000AF8300283C0D08008DAD5A7824040081E3
-:105D6000AF4D00203C05080024A55A780E00023CE7
+:105D5000AF8300283C0D08008DAD5A9824040081C3
+:105D6000AF4D00203C05080024A55A980E00023CC7
 :105D7000A36A00348F90001C240200090A00036209
 :105D8000AF82002802B288213225FFFF0E000236C2
 :105D9000240400840A0003628F90001C1082FFA478
 :105DA00024050400288B000311600170240C0004FA
 :105DB000240300015483FF9E240540000A00043B95
-:105DC000240501003C04080024845A788F62004CAA
+:105DC000240501003C04080024845A988F62004C8A
 :105DD0000E00028D8F6300508F90001C0000202168
 :105DE0000A000362AF8400288E1000042404008A95
 :105DF000AF50002093790005333800021700015F8F
@@ -1525,13 +1525,13 @@
 :105F2000000028210E00022A2406000E928D000097
 :105F3000240EFF800200282101AE8025A2900000DF
 :105F4000240400040E000C5C240600300A0003EB5D
-:105F50008F90001C8E0800043C14080026945A7888
-:105F60003C010800AC285A78AF480020921F00037B
+:105F50008F90001C8E0800043C14080026945A9868
+:105F60003C010800AC285A98AF480020921F00035B
 :105F700033F9000413200002240200122402000658
 :105F8000A362003F920B001B2404FFC03165003F59
 :105F900000A43825A367003E9206000330C200012A
 :105FA00014400132000000008E020008AE8200089A
-:105FB0003C0208008C425A8010400131000249C264
+:105FB0003C0208008C425AA010400131000249C244
 :105FC000A76900088E14000C240C0001240300149F
 :105FD000AF74002C8E0E0010AF6E0030960D0016C0
 :105FE000A76D0038960A0014A76A003AAF6C000C3F
@@ -1546,14 +1546,14 @@
 :10607000004050218F89001C240700890140202105
 :106080008D25001C240600010E00022A00000000DD
 :106090000A0003EB8F90001C960D00023C140800D0
-:1060A00026945A7831AA0004514000B83C10600090
-:1060B0008E0E001C3C010800AC2E5A78AF4E00201A
+:1060A00026945A9831AA0004514000B83C10600070
+:1060B0008E0E001C3C010800AC2E5A98AF4E0020FA
 :1060C000920700102408001430E200FF144800D6A4
 :1060D00000000000960B00023163000114600165AE
 :1060E000000000008E020004AE8200083C1408008C
-:1060F0008E945A801280015B000000008F7400743F
+:1060F0008E945AA01280015B000000008F7400741F
 :106100003C0380002404000102835825AF6B007417
-:10611000A3600005AF64000C3C0708008CE75A80C0
+:10611000A3600005AF64000C3C0708008CE75AA0A0
 :106120008F86001CA7640010000711C2A76400122C
 :10613000A7640014A7640016A76200088CC80008B2
 :1061400024040002AF68002C8CC5000CAF65003041
@@ -1562,14 +1562,14 @@
 :106170008F89001C912E0013A36E00378F90001C96
 :10618000960D0014A76D0038960A0016A76A003A0B
 :106190008E0C0018AF6C00245620FDCCAF84002874
-:1061A0003C05080024A55A780E0002640000202156
+:1061A0003C05080024A55A980E0002640000202136
 :1061B0008F90001C0A0004A7000020218E1000040C
 :1061C00024070081AF500020936900233134001070
 :1061D000128000170000000002002021000028218A
 :1061E0002406001F0E00022A000000000A0003EB34
-:1061F0008F90001C3C05080024A55A780E000287E9
+:1061F0008F90001C3C05080024A55A980E000287C9
 :10620000240400828F90001C000028210A000362F1
-:10621000AF8500283C0408008C845A780E0014E5F1
+:10621000AF8500283C0408008C845A980E0014E8CE
 :10622000000000008F90001C0A000482000018216A
 :106230000E00025602002021937800230200202144
 :10624000370F00100E00025FA36F002300003821FB
@@ -1578,43 +1578,43 @@
 :106270009618000EA4D8002C921F000C33F90002CF
 :1062800013200005000038218E0200149608001229
 :10629000ACC2001CA4C8001A0A0005432406000969
-:1062A0003C05080024A55A780E0002872404008BC0
+:1062A0003C05080024A55A980E0002872404008BA0
 :1062B0008F90001C0011282B0A000362AF85002874
-:1062C000AF6000843C0A08008D4A5A783C0D0800F3
+:1062C000AF6000843C0A08008D4A5A983C0D0800D3
 :1062D0008DAD0050240CFF803C02000C014D1821B4
 :1062E000006C2024AF4400288E070014306B007F20
 :1062F000017A282100A2C821AF2700D88E060014F9
 :10630000AF9900D0AF2600DC8E080010251FFFFEDD
-:106310000A000408AF3F01083C0508008CA55A7824
+:106310000A000408AF3F01083C0508008CA55A9804
 :106320003C1908008F39005024CCFFFE00B9C02171
-:1063300003047824AF4F00283C1408008E945A7848
+:1063300003047824AF4F00283C1408008E945A9828
 :106340003C0908008D2900500289702131CD007F61
 :1063500001BA502101478021AE0600D8AF9000D08D
 :10636000AE0000DC0A0003B1AE0C0108548CFE3014
 :10637000240540000A00043B240510000E00032EF3
 :10638000000000000A0003EB8F90001C8E0F442CCD
-:106390003C186C62370979703C010800AC205A78CF
+:106390003C186C62370979703C010800AC205A98AF
 :1063A00015E9000824050140979F00349786002CCA
 :1063B0000280282103E6C82B132000112404009238
 :1063C000240501400E000C7A240400023C01080060
-:1063D000AC225A78AF4200203C0508008CA55A78C0
+:1063D000AC225A98AF4200203C0508008CA55A9880
 :1063E00010A00005240400830E00084500000000F2
-:1063F00010400009240400833C05080024A55A78B5
+:1063F00010400009240400833C05080024A55A9895
 :106400000E000264000000008F90001C0011202B81
 :106410000A000362AF8400280E0008490000000053
 :106420000A00055F8F90001C0E00084D0000000060
-:106430003C05080024A55A780A00062F2404008B86
+:106430003C05080024A55A980A00062F2404008B66
 :10644000240400040E000C7A240500301440002AB5
 :10645000004050218F89001C240700830140202127
 :106460008D25001C0A000551240600018E04000839
 :106470000E000241000000000A00051BAE82000869
-:106480003C05080024A55A780E00023C240400872D
+:106480003C05080024A55A980E00023C240400870D
 :106490008F90001C0A0005360011102B8F830038E6
 :1064A0008F8600301066FE9D000038213C070800F2
-:1064B00024E759FC000320C0008728218CAC000091
+:1064B00024E75A1C000320C0008728218CAC000070
 :1064C00011900061246A00013143000F5466FFFA05
 :1064D000000320C00A0004F6000038213C05080033
-:1064E00024A55A780E000287240400828F90001C95
+:1064E00024A55A980E000287240400828F90001C75
 :1064F0000A000536000010213C0B0008034B202148
 :106500002403005024070001AF420020A0830000B4
 :10651000A08700018F82001C90480004A08800180A
@@ -1623,7 +1623,7 @@
 :10654000A098001B8F94001C928F0008A08F001C45
 :106550008F89001C912E0009A08E001D8F8D001CBC
 :1065600091AC000AA08C001E8F8B001C3C0C080014
-:10657000258C59FC9163000B3C0B0800256B59F8E6
+:10657000258C5A1C9163000B3C0B0800256B5A18A4
 :10658000A083001F8F87001C90E8000CA0880020CB
 :106590008F82001C9045000D24024646A0850021F4
 :1065A0008F86001C90DF000EA09F00228F99001C98
@@ -1636,9 +1636,9 @@
 :10661000ACCA0000AF88003011100006AF3F000088
 :10662000000038218D25001C014020210A00055161
 :1066300024060001250C00013184000F00003821E0
-:106640000A0006B8AF8400383C07080024E759F870
+:106640000A0006B8AF8400383C07080024E75A184F
 :106650000087302100003821ACA000000A0004F6B9
-:10666000ACC000003C05080024A55A780A00062F9B
+:10666000ACC000003C05080024A55A980A00062F7B
 :10667000240400878E0400040E0002410000000084
 :106680000A00056AAE8200083084FFFF30C600FFB2
 :106690008F4201B80440FFFE00064400010430258B
@@ -1693,7 +1693,7 @@
 :1069A00000A62024148300108F84003C00054402BC
 :1069B0003C09800000A980241480FFE9310600FF13
 :1069C0002CCA00095140FFEB262300010006688015
-:1069D0003C0E080025CE578C01AE60218D8B000047
+:1069D0003C0E080025CE579801AE60218D8B00003B
 :1069E0000160000800000000022010218FBF001C81
 :1069F0008FB200188FB100148FB0001003E00008B0
 :106A000027BD00200E0006D1240400841600FFD804
@@ -1715,7 +1715,7 @@
 :106B000000042082314300FF388B00013164000112
 :106B100010800002246C0001318300FF03E00008B4
 :106B200000601021308BFFFF000B394230E600FF80
-:106B30003C09080025295978000640800109602198
+:106B30003C09080025295998000640800109602178
 :106B40008D8700003164001F240A0001008A1804A8
 :106B500030A500FF00E3202514A000020003102749
 :106B600000E22024240F000100CF700401096821F5
@@ -1727,7 +1727,7 @@
 :106BC000AC642018AC62200000000000000000004F
 :106BD00003E000080000000027BDFFE82402FFFFDB
 :106BE000AFBF0010AF82000C000020213C0608005F
-:106BF00024C659782405FFFF248900010004408041
+:106BF00024C659982405FFFF248900010004408021
 :106C00003124FFFF010618212C87002014E0FFFA31
 :106C1000AC6500000E0008160000202124020001CF
 :106C20003C04600024050020AC822018AC852000C4
@@ -1745,7 +1745,7 @@
 :106CE000000000003C0360008C6D200031AC000807
 :106CF0001580FFF9000000008C6E201405C00020F4
 :106D0000000000000E0007DA8F84000C00024080B3
-:106D10003C09080025295978010938218CE4000034
+:106D10003C09080025295998010938218CE4000014
 :106D20000E0007DA00028140020220213090FFFFAE
 :106D3000020020210E0007F8000028213C0C8000F2
 :106D4000022C58253210FFFF3C116000240A00205D
@@ -1785,36 +1785,36 @@
 :106F6000AE0F44088FBF00148FB000103C0C6000BF
 :106F7000240E10003C0D020027BD0018AD8E4420E9
 :106F800003E00008AD8D08100A0008BB24050001CD
-:106F90000A0008BB000028213C08080025085D8481
+:106F90000A0008BB000028213C08080025085DA461
 :106FA0002404FFFF010018212402001E2442FFFFD9
 :106FB000AC6400000441FFFD246300043C070800AA
-:106FC00024E75E008CE5FFFC2404001C240600017D
+:106FC00024E75E208CE5FFFC2404001C240600015D
 :106FD000308A001F0146480424840001000910275C
 :106FE0002C8300201460FFFA00A22824ACE5FFFCEB
-:106FF0003C05666634A4616E3C06080024C65EC08B
+:106FF0003C05666634A4616E3C06080024C65EE06B
 :10700000AF840058AF88009C2404FFFF00C0182103
 :107010002402001F2442FFFFAC6400000441FFFD76
-:10702000246300043C0766663C05080024A55E80D6
+:10702000246300043C0766663C05080024A55EA0B6
 :10703000AF86004834E6616EAF8600982404FFFFF7
 :1070400000A018212402000F2442FFFFAC640000BE
 :107050000441FFFD246300043C0B66663C06080007
-:1070600024C65E003568616EAF8500A4AF880070ED
+:1070600024C65E203568616EAF8500A4AF880070CD
 :107070002404FFFF00C018212402001F2442FFFF48
 :10708000AC6400000441FFFD246300043C0D66660F
-:107090003C0A0800254A5F4035AC616EAF8600901F
+:107090003C0A0800254A5F6035AC616EAF860090FF
 :1070A000AF8C005C2404FFFF014018212402000380
 :1070B0002442FFFFAC6400000441FFFD2463000490
-:1070C0003C09080025295F508D27FFFC2404000699
+:1070C0003C09080025295F708D27FFFC2404000679
 :1070D000240500013099001F0325C0042484000109
 :1070E000001878272C8E002015C0FFFA00EF3824F6
 :1070F000AD27FFFC3C09666624030400240403DC7E
 :1071000024050200240600663522616E3C08080052
-:1071100025085A84AF820074AF830044AF83006CAB
+:1071100025085AA4AF820074AF830044AF83006C8B
 :10712000AF830050AF830084AF8A008CAF840064CB
 :10713000AF85004CAF860054AF840078AF85006007
 :10714000AF86008001001821240200022442FFFFC4
 :10715000AC6000000441FFFD24630004240400032C
-:107160002403000C3C0A0800254A5A90AF8A0068A4
+:107160002403000C3C0A0800254A5AB0AF8A006884
 :107170000A00098E2405FFFF000418802484000102
 :10718000006858212C8700C014E0FFFBAD650000AB
 :107190003C0E666635CD616E240C17A024081800DD
@@ -1823,10 +1823,10 @@
 :1071C00000003821000028210A0009A5AF8400A092
 :1071D0001060000624E7000100C4302124A500014E
 :1071E0002CC20BF51440FFFA2CA300663C090800E2
-:1071F00025295F4001201821240200032442FFFFBB
+:1071F00025295F6001201821240200032442FFFF9B
 :10720000AC6000000441FFFD2463000410E0001A9C
 :1072100024E3FFFF0003294210A0000A0000202100
-:107220002406FFFF3C03080024635F402484000120
+:107220002406FFFF3C03080024635F602484000100
 :107230000085502BAC660000250800011540FFFBBF
 :107240002463000430E2001F10400008000868803A
 :10725000240C0001004C38040008588001692821E2
@@ -1849,8 +1849,8 @@
 :10736000AFB3001CAFB20018AFB10014AFB0001043
 :107370000A000A12AFA5003C504000018F9400683B
 :1073800027DEFFFF13C00028269400048E92000021
-:107390003C03080024635D801240FFF70283102B3A
-:1073A0003C04080024845A84028410230002A8C0EC
+:107390003C03080024635DA01240FFF70283102B1A
+:1073A0003C04080024845AA4028410230002A8C0CC
 :1073B000000098210A000A212411000100118840D0
 :1073C000122000260000000002B380210251282470
 :1073D0000200202110A0FFF9267300010E0009DE33
@@ -1862,10 +1862,10 @@
 :107430008FBE00308FB7002C8FB600288FB5002488
 :107440008FB400208FB3001C8FB200188FB10014CE
 :107450008FB0001003E0000827BD00383C0E080084
-:1074600025CE5D80028E102B0A000A0DAE92000020
+:1074600025CE5DA0028E102B0A000A0DAE92000000
 :1074700027BDFFD8AFB10014AFB00010AFBF0020E0
 :10748000AFB3001CAFB2001800A0882110A0001FED
-:10749000000480403C13080026735A840A000A5AEC
+:10749000000480403C13080026735AA40A000A5ACC
 :1074A0002412000112200019261000010E0009F517
 :1074B00002002021000231422444FFA0000618806F
 :1074C0003045001F2C8217A1007318212631FFFFC1
@@ -1876,7 +1876,7 @@
 :107510008FB3001C8FB200188FB100148FB0001011
 :1075200003E0000827BD00288F85009C00805821BB
 :107530000000402100004821240A001F3C0C0800E4
-:10754000258C5DFC3C0D080025AD5D848CA60000FB
+:10754000258C5E1C3C0D080025AD5DA48CA60000BA
 :1075500050C000140000402100AD1023000238C0CC
 :10756000240300010A000A930000202115000003F3
 :1075700000E410212448202400004821252900018E
@@ -1886,21 +1886,21 @@
 :1075B000254AFFFF1540FFE5AF85009C512B0004D5
 :1075C0002506DFDC0000402103E000080100102157
 :1075D0000006614230C5001F000C50803C070800C7
-:1075E00024E75D8424040001014730211120000FAD
-:1075F00000A420043C05080024A55E0014800005BA
+:1075E00024E75DA424040001014730211120000F8D
+:1075F00000A420043C05080024A55E20148000059A
 :107600002529FFFF24C6000410C50011000000005A
 :10761000240400018CCF00000004C0270004204097
 :1076200001F868241520FFF5ACCD00008F99007893
 :1076300001001021032B482303E00008AF890078E4
-:107640003C05080024A55D840A000A9B0000402137
-:107650003C06080024C65D840A000AB42404000124
+:107640003C05080024A55DA40A000A9B0000402117
+:107650003C06080024C65DA40A000AB42404000104
 :10766000308800FF240200021102000A24030003F4
 :107670001103005C8F8900A4240400041104005F3E
 :1076800024050005110500670000182103E000082B
-:10769000006010218F8900483C0C0800258C5EC0DA
-:1076A0003C04080024845F40240300201060000F85
+:10769000006010218F8900483C0C0800258C5EE0BA
+:1076A0003C04080024845F60240300201060000F65
 :1076B00000005821240D0002240E00033C0F080096
-:1076C00025EF5EC08D27000014E0000B30F9FFFFAE
+:1076C00025EF5EE08D27000014E0000B30F9FFFF8E
 :1076D000252900040124C02B53000001018048210A
 :1076E0002463FFFF5460FFF88D270000016018211C
 :1076F00003E0000800601021132000323C0500FF69
@@ -1918,15 +1918,15 @@
 :1077B000AF89008C016018212549FFFF0A000AEB00
 :1077C000AF89008000E52024000736021080FFD03A
 :1077D000240A001800075402314600FF0A000AF389
-:1077E000240A00103C0C0800258C5E803C04080034
-:1077F00024845EC00A000ADA240300103C0C08004E
-:10780000258C5E003C04080024845E800A000AD9AE
+:1077E000240A00103C0C0800258C5EA03C04080014
+:1077F00024845EE00A000ADA240300103C0C08002E
+:10780000258C5E203C04080024845EA00A000AD96E
 :107810008F89009000071A02306600FF0A000AF301
-:10782000240A00088F89008C3C0C0800258C5F40DE
-:107830003C04080024845F500A000ADA2403000490
+:10782000240A00088F89008C3C0C0800258C5F60BE
+:107830003C04080024845F700A000ADA2403000470
 :10784000000A4080250B003024E6FFFF016018216C
 :10785000AF8900480A000AEBAF86006C000AC982B3
-:10786000001978803C07080024E75E8001E72021AA
+:10786000001978803C07080024E75EA001E720218A
 :10787000000A18428C8F00003079001F032C380456
 :107880000007C02701F860240A000B08AC8C000038
 :10789000000331420006288000AF28213062001F1B
@@ -1937,7 +1937,7 @@
 :1078E000AF8A0060254B1030AF89009001601821ED
 :1078F00025C9FFFF0A000AEBAF8900843086000724
 :107900002CC2000610400014000000000006408059
-:107910003C030800246357B0010338218CE40000C5
+:107910003C030800246357BC010338218CE40000B9
 :1079200000800008000000002409000310A9000ED8
 :1079300000000000240A000510AA000B000000004F
 :10794000240B000110AB0008000000008F8C00A089
@@ -1948,7 +1948,7 @@
 :1079900010880068240E0005108E007F2CAF143074
 :1079A0008FBF001003E0000827BD00182CA2003094
 :1079B0001440FFFC8FBF001024A5FFD0000531C28A
-:1079C000000668803C07080024E75EC001A730215C
+:1079C000000668803C07080024E75EE001A730213C
 :1079D0008CC900000005288230AC001F240B000178
 :1079E000018B50048F840048012A4025ACC8000058
 :1079F0008C83000050600001AF8600488F98006CB7
@@ -1956,16 +1956,16 @@
 :107A1000AF8F006C24A600010006414200082080C0
 :107A2000008718218C79000030C2001F2406000155
 :107A30000046F804033F382410E0FFDA8FBF00103F
-:107A40000005C182001870803C0F080025EF5E80A1
+:107A40000005C182001870803C0F080025EF5EA081
 :107A500001CF48218D2B00000005684231A5001F91
 :107A600000A66004016C502527BD001803E0000843
 :107A7000AD2A00002CA7003014E0FFCA8FBF001011
 :107A800030B900071723FFC724A8FFCE00086A02F9
-:107A9000000D60803C0B0800256B5E80018B30215F
+:107A9000000D60803C0B0800256B5EA0018B30213F
 :107AA0008CC40000000828C230AA001F240800016E
 :107AB000014848048F8200A400891825ACC3000047
 :107AC0008C5F000053E00001AF8600A40005704009
-:107AD000000E7942000F28803C04080024845EC018
+:107AD000000E7942000F28803C04080024845EE0F8
 :107AE00000A418218C6B000025DF000131CD001FA0
 :107AF000001F514201A86004016C4825000A108053
 :107B0000AC690000004428218CA600008F9800601A
@@ -1973,7 +1973,7 @@
 :107B2000270E000127BD0018ACAF000003E00008DD
 :107B3000AF8E006024A5EFD02CB804001300FF998D
 :107B40008FBF001000053142000658803C0A080033
-:107B5000254A5E00016A30218CC4000030A3001F5A
+:107B5000254A5E20016A30218CC4000030A3001F3A
 :107B600024090001006910048F9900900082F82513
 :107B7000ACDF00008F27000050E00001AF860090CE
 :107B80008F8D00848FBF001027BD001825AC000129
@@ -1982,7 +1982,7 @@
 :107BB00003E4C8210019384024F8143000B8402BE1
 :107BC0001100FF788FBF001024A4EBD00E00021329
 :107BD00000C0282100027942000F70803C0D08008F
-:107BE00025AD5F4001CD20218C8B0000304C001F63
+:107BE00025AD5F6001CD20218C8B0000304C001F43
 :107BF00024060001018618048F89008C016350253A
 :107C0000AC8A00008D25000050A00001AF84008CDC
 :107C10008F9800808FBF001027BD00182708000133
@@ -2030,9 +2030,9 @@
 :107EB00014400010000000008CA800842D06400033
 :107EC00050C0000F240340008CAA0084008A482B75
 :107ED000512000018CA3008400035A42000B208033
-:107EE0003C05080024A558000085182103E000087F
+:107EE0003C05080024A558200085182103E000085F
 :107EF0008C62000014C0FFF4000000002403400066
-:107F000000035A42000B20803C05080024A55800BD
+:107F000000035A42000B20803C05080024A558209D
 :107F10000085182103E000088C6200008F8300D0E8
 :107F2000906600D024C50001A06500D08F8500D0E8
 :107F3000906400D090A200D210440017000000000E
@@ -2378,252 +2378,253 @@
 :109470005040FFA1241F0C008F8300D0906801137F
 :109480003106003F0A00124634C20040AF9B00C8BC
 :1094900003E00008AF8000EC3089FFFF0009404284
-:1094A0002D020041000929801440000200095040AB
-:1094B00024080040000879400008C0C001F8582185
-:1094C000256701A800EF702125CC007F240DFF80C7
-:1094D000018D18240065302100CA282125640088E8
-:1094E000240A00883C010800AC2A004C3C0108001A
-:1094F000AC240050AF8500D43C010800AC290060CA
-:109500003C010800AC2800643C010800AC27005472
-:109510003C010800AC2300583C010800AC26005C6C
-:1095200003E0000800000000308300FF30C6FFFFAA
-:1095300030E400FF8F4201B80440FFFE00034C00FE
-:10954000012438253C08600000E820253C03100079
-:10955000AF450180AF460184AF44018803E00008B5
-:10956000AF4301B88F86001C3C09601235270010FC
-:109570008CCB00043C0C600E35850010316A00066F
-:109580002D480001ACE800C48CC40004ACA43180B8
-:109590008CC2000894C30002ACA2318403E000082E
-:1095A000A78300E43C0308008C6300508F8400E82C
-:1095B0008F86001C2402FF800064C0210302C8249F
-:1095C000AF5900288CCD00043305007F00BA782104
-:1095D0003C0E000C01EE2821ACAD00588CC80008F0
-:1095E000AF8500D03C076012ACA8005C8CCC0010AA
-:1095F00034E80010ACAC000C8CCB000CACAB000819
-:1096000094AA00143C0208008C4200442549000141
-:10961000A4A9001494A400143083FFFF1062001763
-:109620008F8400D03C0A08008D4A0040A4AA001292
-:109630008CCE0018AC8E00248CCD0014AC8D002094
-:109640008CC70018AC87002C8CCC001424060001B9
-:10965000AC8C00288D0B00BC5166001A8D0200B442
-:109660008D0200B8A482003A948F003AA48F003C87
-:10967000948800D403E000083102FFFF3C09080091
-:109680008D290024A4A000148F8400D0A4A9001266
-:109690008CCE0018AC8E00248CCD0014AC8D002034
-:1096A0008CC70018AC87002C8CCC00142406000159
-:1096B000AC8C00288D0B00BC5566FFEA8D0200B80B
-:1096C0008D0200B4A482003A948F003AA48F003C2B
-:1096D000948800D403E000083102FFFF8F86001C4D
-:1096E0003C0C08008D8C0050240BFF808CCD0008B2
-:1096F0003C03000C000D51C0018A4021010B48249D
-:10970000AF8A00E8AF49002890C700073105007F05
-:1097100000BA10210043282130E4000410800039F1
-:10972000AF8500D090CF000731EE000811C000389F
-:10973000000000008CD9000C8CC400140324C02B42
-:1097400013000030000000008CC2000CACA20064CA
-:109750008CCD00182402FFF8ACAD00688CCC001052
-:10976000ACAC00808CCB000CACAB00848CCA001C71
-:10977000ACAA007C90A900BC01224024A0A800BC97
-:1097800090C300073067000810E000048F8500D008
-:1097900090AF00BC35EE0001A0AE00BC90D9000730
-:1097A00033380001130000088F8300D08F8700D06A
-:1097B0002404003490E800BC35030002A0E300BCA0
-:1097C0008F8300D0AC6400C090C90007312600022E
-:1097D00010C0000500000000906A00BC3542000483
-:1097E000A06200BC8F8300D09065011330AD003FB4
-:1097F000A06D01138F8C00D0958B00D403E000087E
-:109800003162FFFF8CC200140A0013020000000046
-:109810000A001303ACA0006427BDFFD8AFB000104E
-:109820008F90001CAFBF0024AFB40020AFB200186F
-:10983000AFB10014AFB3001C9613000E3C07600AD2
-:109840003C1460063264FFFF369300100E00125580
-:1098500034F404108F8400D43C11600E0E00099B78
-:1098600036310010920E00153C0708008CE70060AE
-:109870003C12601231CD000FA38D00F08E0E00045B
-:109880008E0D000896080012961F00109619001AF7
-:109890009618001E960F001C310CFFFF33EBFFFFE4
-:1098A000332AFFFF3309FFFF31E6FFFF3C010800C9
-:1098B000AC2B00403C010800AC2C00243C0108000B
-:1098C000AC2A0044AE293178AE26317C92020015D4
-:1098D0009603001636520010304400FF3065FFFF3B
-:1098E0003C0608008CC60064AE243188AE4500B446
-:1098F0009208001496190018241F0001011FC004CB
-:10990000332FFFFF3C0508008CA50058AE5800B867
-:10991000AE4F00BC920C0014AF8E00D8AF8D00DCAF
-:10992000318B00FFAE4B00C0920A0015AE670048B5
-:10993000AE66004C314900FFAE4900C8AE65007C00
-:109940003C0308008C6300503C0408008C84004CED
-:109950003C0808008D0800543C0208008C42005C62
-:109960008FBF0024AE6300808FB00010AE83007400
-:109970008FB3001CAE22319CAE4200DCAE2731A07A
-:10998000AE2631A4AE24318CAE233190AE28319472
-:10999000AE253198AE870050AE860054AE8500707B
-:1099A0008FB10014AE4700E0AE4600E4AE4400CCF8
-:1099B000AE4300D0AE4800D4AE4500D88FB40020EE
-:1099C0008FB2001803E0000827BD002827BDFFE084
-:1099D000AFB10014AFBF0018241100010E000845FC
-:1099E000AFB0001010510005978400E6978300CCBB
-:1099F0000083102B144000088F8500D42407000238
-:109A00008FBF00188FB100148FB0001000E010213C
-:109A100003E0000827BD00200E000C7A2404000596
-:109A2000AF8200E81040FFF6240700020E0008494C
-:109A30008F90001C979F00E68F9900E88F8D00C8DB
-:109A400027EF0001240E0050AF590020A78F00E639
-:109A5000A1AE00003C0C08008D8C00648F8600C80D
-:109A6000240A8000000C5E00ACCB0074A4C0000689
-:109A700094C9000A241FFF803C0D000C012AC02459
-:109A8000A4D8000A90C8000A24182000011F182535
-:109A9000A0C3000A8F8700C8A0E000788F8500C8A7
-:109AA00000003821A0A000833C0208008C42005036
-:109AB0008F8400E80044782101FFC824AF590028B2
-:109AC000960B000231EE007F01DA6021018D30211A
-:109AD000A4CB00D4960A0002AF8600D03C0E00044E
-:109AE00025492401A4C900E68E080004ACC800047E
-:109AF0008E030008ACC30000A4C00010A4C0001472
-:109B0000A0C000D08F8500D02403FFBFA0A000D14B
-:109B10003C0408008C8400648F8200D0A04400D2F2
-:109B20008E1F000C8F8A00D0978F00E4AD5F001C61
-:109B30008E19001024100030AD590018A5400030D7
-:109B4000A5510054A5510056A54F0016AD4E006812
-:109B5000AD580080AD580084914D006231AC000FCB
-:109B6000358B0010A14B00628F8600D090C9006336
-:109B70003128007FA0C800638F8400D02406FFFF37
-:109B80009085006300A31024A08200638F9100D011
-:109B900000E01021923F00BC37F90001A23900BC5F
-:109BA0008F8A00D0938F00F0AD580064AD5000C094
-:109BB000914E00D3000F690031CC000F018D582564
-:109BC000A14B00D38F8500D08F8900DCACA900E8C1
-:109BD0008F8800D88FBF00188FB100148FB000108D
-:109BE00027BD0020ACA800ECA4A600D6A4A000E0ED
-:109BF000A4A000E203E000080000000027BDFFE091
-:109C0000AFB000108F90001CAFB10014AFBF0018B0
-:109C10008E1900043C1808008F180050240FFF8094
-:109C2000001989C00238702131CD007F01CF602436
-:109C300001BA50213C0B000CAF4C0028014B4021D5
-:109C4000950900D4950400D68E0700043131FFFF3A
-:109C5000AF8800D00E000913000721C08E06000453
-:109C60008F8300C8000629C0AF4500209064003EE5
-:109C700030820040144000068F8400D0341FFFFF64
-:109C8000948300D63062FFFF145F000400000000E0
-:109C9000948400D60E0008A83084FFFF8E050004CF
-:109CA000022030218FBF00188FB100148FB0001038
-:109CB0002404002200003821000529C00A0012797E
-:109CC00027BD002027BDFFE0AFB100143091FFFF9A
-:109CD000AFB00010AFBF00181220001D000080219F
-:109CE0008F86001C8CC500002403000600053F027F
-:109CF0000005140230E4000714830015304500FF0E
-:109D00002CA800061100004D000558803C0C0800EE
-:109D1000258C57C8016C50218D4900000120000896
-:109D2000000000008F8E00EC240D000111CD0059C1
-:109D300000000000260B00013170FFFF24CA002044
-:109D40000211202B014030211480FFE6AF8A001C55
-:109D5000020010218FBF00188FB100148FB00010C7
-:109D600003E0000827BD0020938700CE14E00038F0
-:109D7000240400140E001335000000008F86001C20
-:109D8000240200010A00147CAF8200EC8F8900ECF1
-:109D9000240800021128003B24040013000028219D
-:109DA00000003021240700010E001279000000009D
-:109DB0000A00147C8F86001C8F8700EC24050002AB
-:109DC00014E5FFF6240400120E0012E60000000065
-:109DD0008F8500E800403021240400120E00127923
-:109DE000000038210A00147C8F86001C8F8300EC51
-:109DF000241F0003147FFFD0260B00010E001298D1
-:109E0000000000008F8500E800403021240200029D
-:109E10002404001000003821AF8200EC0E001279FB
-:109E2000000000000A00147C8F86001C8F8F00EC5D
-:109E30002406000211E6000B0000000024040010BC
-:109E400000002821000030210A0014992407000195
-:109E5000000028210E001279000030210A00147C35
-:109E60008F86001C0E0013A2000000001440001298
-:109E70008F99001C8F86001C240200030A00147CAA
-:109E8000AF8200EC0E00142E000000000A00147CCB
-:109E90008F86001C0E0012880000000024020002C1
-:109EA0002404001400002821000030210000382183
-:109EB0000A0014B6AF8200EC0040382124040010E0
-:109EC00097380002000028210E0012793306FFFFA8
-:109ED0000A00147C8F86001C8F8400C83C077FFF1B
-:109EE00034E6FFFF8C8500742402000100A61824CC
-:109EF000AC83007403E00008A082000510A00036C7
-:109F00002CA20080274A04003C0B00052409008095
-:109F1000104000072408008030A6000F00C5402133
-:109F20002D0300811460000200A048212408008055
-:109F3000AF4B0030000000000000000000000000F7
-:109F40001100000900003821014030218C8D0000F3
-:109F500024E7000400E8602BACCD0000248400045A
-:109F60001580FFFA24C60004000000000000000075
-:109F7000000000003C0E0006010E3825AF470030FF
-:109F80000000000000000000000000008F4F0000F3
-:109F900031E800101100FFFD000000008F42003C7E
-:109FA0008F43003C0049C8210323C02B1300000449
-:109FB000000000008F4C003825860001AF460038B5
-:109FC0008F47003C00A9282300E96821AF4D003CE1
-:109FD00014A0FFCE2CA2008003E0000800000000C7
-:109FE00027BDFFD03C020002AFB100143C11000CB1
-:109FF000AF450038AFB3001CAF46003C008098214D
-:10A00000AF42003024050088AF44002803512021CE
-:10A01000AFBF0028AFB50024AFB40020AFB2001826
-:10A020000E0014EEAFB000103C1F08008FFF004C74
-:10A030003C1808008F1800642410FF8003F3A82147
-:10A0400032B9007F02B078240018A0C0033A702112
-:10A050000018914001D12021AF4F00280E0014EECE
-:10A06000025428213C0D08008DAD0050240501202C
-:10A0700001B35821316C007F01705024019A4821AE
-:10A08000013120210E0014EEAF4A00283C080800E0
-:10A090008D0800543C0508008CA50064011338218C
-:10A0A00030E6007F00F0182400DA20210091202102
-:10A0B000AF4300280E0014EE000529403C020800C2
-:10A0C0008C4200583C1008008E1000601200001CEA
-:10A0D000005388212415FF800A0015713C14000CE0
-:10A0E0003226007F0235182400DA20210240282180
-:10A0F000AF430028009420210E0014EE2610FFC06C
-:10A100001200000F023288212E05004110A0FFF43A
-:10A11000241210003226007F00109180023518248E
-:10A1200000DA202102402821AF430028009420219A
-:10A130000E0014EE000080211600FFF30232882189
-:10A140003C0B08008D6B005C240AFF802405000294
-:10A1500001734021010A4824AF4900283C0408004B
-:10A16000948400623110007F021A88213C07000CA1
-:10A170000E000CAA0227982100402821026020210D
-:10A180008FBF00288FB500248FB400208FB3001C30
-:10A190008FB200188FB100148FB000100A0014EEB7
-:10A1A00027BD00308F83001C8C6200041040000328
-:10A1B0000000000003E00008000000008C640010B4
-:0CA1C0008C6500080A0015278C66000C56
-:04A1CC00000000008F
-:10A1D0000000001B0000000F0000000A0000000843
-:10A1E000000000060000000500000005000000045B
-:10A1F0000000000400000003000000030000000352
-:10A200000000000300000003000000020000000244
-:10A210000000000200000002000000020000000236
+:1094A0002D020041000921801440000200095040B3
+:1094B00024080040000830C0000811400046582130
+:1094C000256701A800E2C821272F007F2418FF800C
+:1094D00001F818240064302100CA702125CC00FF57
+:1094E000240DFF00018D202425650088240A0088B2
+:1094F0003C010800AC2A004C3C010800AC2500509F
+:10950000AF8400D43C010800AC2900603C01080095
+:10951000AC2800643C010800AC2700543C01080062
+:10952000AC2300583C010800AC26005C03E00008B6
+:1095300000000000308300FF30C6FFFF30E400FF72
+:109540008F4201B80440FFFE00034C00012438257F
+:109550003C08600000E820253C031000AF45018076
+:10956000AF460184AF44018803E00008AF4301B86F
+:109570008F86001C3C096012352700108CCB00043C
+:109580003C0C600E35850010316A00062D48000144
+:10959000ACE800C48CC40004ACA431808CC20008C8
+:1095A00094C30002ACA2318403E00008A78300E466
+:1095B0003C0308008C6300508F8400E88F86001CF9
+:1095C0002402FF800064C0210302C824AF59002890
+:1095D0008CCD00043305007F00BA78213C0E000CCE
+:1095E00001EE2821ACAD00588CC80008AF8500D032
+:1095F0003C076012ACA8005C8CCC001034E8001072
+:10960000ACAC000C8CCB000CACAB000894AA0014E2
+:109610003C0208008C42004425490001A4A9001422
+:1096200094A400143083FFFF106200178F8400D0D1
+:109630003C0A08008D4A0040A4AA00128CCE0018F3
+:10964000AC8E00248CCD0014AC8D00208CC700188B
+:10965000AC87002C8CCC001424060001AC8C0028B4
+:109660008D0B00BC5166001A8D0200B48D0200B84B
+:10967000A482003A948F003AA48F003C948800D4CE
+:1096800003E000083102FFFF3C0908008D29002497
+:10969000A4A000148F8400D0A4A900128CCE0018BE
+:1096A000AC8E00248CCD0014AC8D00208CC700182B
+:1096B000AC87002C8CCC001424060001AC8C002854
+:1096C0008D0B00BC5566FFEA8D0200B88D0200B418
+:1096D000A482003A948F003AA48F003C948800D46E
+:1096E00003E000083102FFFF8F86001C3C0C0800DD
+:1096F0008D8C0050240BFF808CCD00083C03000CA7
+:10970000000D51C0018A4021010B4824AF8A00E8B6
+:10971000AF49002890C700073105007F00BA10212B
+:109720000043282130E4000410800039AF8500D0C8
+:1097300090CF000731EE000811C000380000000093
+:109740008CD9000C8CC400140324C02B13000030EF
+:10975000000000008CC2000CACA200648CCD00188C
+:109760002402FFF8ACAD00688CCC0010ACAC0080DB
+:109770008CCB000CACAB00848CCA001CACAA007C67
+:1097800090A900BC01224024A0A800BC90C30007FF
+:109790003067000810E000048F8500D090AF00BC57
+:1097A00035EE0001A0AE00BC90D9000733380001AF
+:1097B000130000088F8300D08F8700D0240400346A
+:1097C00090E800BC35030002A0E300BC8F8300D00A
+:1097D000AC6400C090C900073126000210C000052B
+:1097E00000000000906A00BC35420004A06200BC8A
+:1097F0008F8300D09065011330AD003FA06D011341
+:109800008F8C00D0958B00D403E000083162FFFFFD
+:109810008CC200140A001305000000000A001306A1
+:10982000ACA0006427BDFFD8AFB000108F90001C23
+:10983000AFBF0024AFB40020AFB20018AFB1001426
+:10984000AFB3001C9613000E3C07600A3C14600680
+:109850003264FFFF369300100E00125534F40410EA
+:109860008F8400D43C11600E0E00099B363100102D
+:10987000920E00153C0708008CE700603C12601255
+:1098800031CD000FA38D00F08E0E00048E0D000868
+:1098900096080012961F00109619001A9618001EBE
+:1098A000960F001C310CFFFF33EBFFFF332AFFFF45
+:1098B0003309FFFF31E6FFFF3C010800AC2B0040FD
+:1098C0003C010800AC2C00243C010800AC2A0044F8
+:1098D000AE293178AE26317C92020015960300162F
+:1098E00036520010304400FF3065FFFF3C06080090
+:1098F0008CC60064AE243188AE4500B492080014D2
+:1099000096190018241F0001011FC004332FFFFF08
+:109910003C0508008CA50058AE5800B8AE4F00BCFE
+:10992000920C0014AF8E00D8AF8D00DC318B00FF9D
+:10993000AE4B00C0920A0015AE670048AE66004C00
+:10994000314900FFAE4900C8AE65007C3C03080009
+:109950008C6300503C0408008C84004C3C080800D8
+:109960008D0800543C0208008C42005C8FBF00242C
+:10997000AE6300808FB00010AE8300748FB3001C04
+:10998000AE22319CAE4200DCAE2731A0AE2631A41F
+:10999000AE24318CAE233190AE283194AE2531986F
+:1099A000AE870050AE860054AE8500708FB10014B3
+:1099B000AE4700E0AE4600E4AE4400CCAE4300D07B
+:1099C000AE4800D4AE4500D88FB400208FB2001846
+:1099D00003E0000827BD002827BDFFE0AFB1001459
+:1099E000AFBF0018241100010E000845AFB00010F1
+:1099F00010510005978400E6978300CC0083102B5C
+:109A0000144000088F8500D4240700028FBF00187F
+:109A10008FB100148FB0001000E0102103E00008A7
+:109A200027BD00200E000C7A24040005AF8200E858
+:109A30001040FFF6240700020E0008498F90001C1A
+:109A4000979F00E68F9900E88F8D00C827EF0001EF
+:109A5000240E0050AF590020A78F00E6A1AE0000F1
+:109A60003C0C08008D8C00648F8600C8240A80009E
+:109A7000000C5E00ACCB0074A4C0000694C9000AC0
+:109A8000241FFF803C0D000C012AC024A4D8000A2A
+:109A900090C8000A24182000011F1825A0C3000A3E
+:109AA0008F8700C8A0E000788F8500C800003821AB
+:109AB000A0A000833C0208008C4200508F8400E884
+:109AC0000044782101FFC824AF590028960B0002FA
+:109AD00031EE007F01DA6021018D3021A4CB00D46A
+:109AE000960A0002AF8600D03C0E000425492401EE
+:109AF000A4C900E68E080004ACC800048E03000868
+:109B0000ACC30000A4C00010A4C00014A0C000D0CA
+:109B10008F8500D02403FFBFA0A000D13C04080023
+:109B20008C8400648F8200D0A04400D28E1F000C71
+:109B30008F8A00D0978F00E4AD5F001C8E19001053
+:109B400024100030AD590018A5400030A551005434
+:109B5000A5510056A54F0016AD4E0068AD580080C7
+:109B6000AD580084914D006231AC000F358B001070
+:109B7000A14B00628F8600D090C900633128007F1E
+:109B8000A0C800638F8400D02406FFFF9085006387
+:109B900000A31024A08200638F9100D000E0102168
+:109BA000923F00BC37F90001A23900BC8F8A00D077
+:109BB000938F00F0AD580064AD5000C0914E00D3BB
+:109BC000000F690031CC000F018D5825A14B00D347
+:109BD0008F8500D08F8900DCACA900E88F8800D881
+:109BE0008FBF00188FB100148FB0001027BD002068
+:109BF000ACA800ECA4A600D6A4A000E0A4A000E2BB
+:109C000003E000080000000027BDFFE0AFB0001037
+:109C10008F90001CAFB10014AFBF00188E19000464
+:109C20003C1808008F180050240FFF80001989C0CD
+:109C30000238702131CD007F01CF602401BA50215C
+:109C40003C0B000CAF4C0028014B4021950900D47F
+:109C5000950400D68E0700043131FFFFAF8800D095
+:109C60000E000913000721C08E0600048F8300C870
+:109C7000000629C0AF4500209064003E30820040BD
+:109C8000144000068F8400D0341FFFFF948300D659
+:109C90003062FFFF145F000400000000948400D6CF
+:109CA0000E0008A83084FFFF8E050004022030213A
+:109CB0008FBF00188FB100148FB000102404002251
+:109CC00000003821000529C00A00127C27BD0020B1
+:109CD00027BDFFE0AFB100143091FFFFAFB000101F
+:109CE000AFBF00181220001D000080218F86001CCD
+:109CF0008CC500002403000600053F020005140285
+:109D000030E4000714830015304500FF2CA800063E
+:109D10001100004D000558803C0C0800258C57D4DC
+:109D2000016C50218D490000012000080000000056
+:109D30008F8E00EC240D000111CD005900000000B1
+:109D4000260B00013170FFFF24CA00200211202BD6
+:109D5000014030211480FFE6AF8A001C0200102170
+:109D60008FBF00188FB100148FB0001003E00008FF
+:109D700027BD0020938700CE14E00038240400148F
+:109D80000E001338000000008F86001C2402000122
+:109D90000A00147FAF8200EC8F8900EC24080002D7
+:109DA0001128003B2404001300002821000030216A
+:109DB000240700010E00127C000000000A00147F3E
+:109DC0008F86001C8F8700EC2405000214E5FFF647
+:109DD000240400120E0012E9000000008F8500E844
+:109DE00000403021240400120E00127C00003821B3
+:109DF0000A00147F8F86001C8F8300EC241F000351
+:109E0000147FFFD0260B00010E00129B0000000003
+:109E10008F8500E800403021240200022404001055
+:109E200000003821AF8200EC0E00127C0000000020
+:109E30000A00147F8F86001C8F8F00EC240600021E
+:109E400011E6000B0000000024040010000028218F
+:109E5000000030210A00149C240700010000282182
+:109E60000E00127C000030210A00147F8F86001C37
+:109E70000E0013A500000000144000128F99001C72
+:109E80008F86001C240200030A00147FAF8200ECBE
+:109E90000E001431000000000A00147F8F86001CA1
+:109EA0000E00128B000000002402000224040014A3
+:109EB0000000282100003021000038210A0014B9D8
+:109EC000AF8200EC004038212404001097380002D3
+:109ED000000028210E00127C3306FFFF0A00147FC9
+:109EE0008F86001C8F8400C83C077FFF34E6FFFF8D
+:109EF0008C8500742402000100A61824AC83007431
+:109F000003E00008A082000510A000362CA200800B
+:109F1000274A04003C0B000524090080104000077C
+:109F20002408008030A6000F00C540212D030081C9
+:109F30001460000200A0482124080080AF4B0030CC
+:109F400000000000000000000000000011000009F7
+:109F500000003821014030218C8D000024E70004EE
+:109F600000E8602BACCD0000248400041580FFFACB
+:109F700024C60004000000000000000000000000F3
+:109F80003C0E0006010E3825AF47003000000000EF
+:109F900000000000000000008F4F000031E80010BA
+:109FA0001100FFFD000000008F42003C8F43003C89
+:109FB0000049C8210323C02B130000040000000047
+:109FC0008F4C003825860001AF4600388F47003C93
+:109FD00000A9282300E96821AF4D003C14A0FFCE62
+:109FE0002CA2008003E000080000000027BDFFD085
+:109FF0003C020002AFB100143C11000CAF45003828
+:10A00000AFB3001CAF46003C00809821AF42003047
+:10A0100024050088AF44002803512021AFBF002849
+:10A02000AFB50024AFB40020AFB200180E0014F199
+:10A03000AFB000103C1F08008FFF004C3C18080018
+:10A040008F1800642410FF8003F3A82132B9007F29
+:10A0500002B078240018A0C0033A70210018914083
+:10A0600001D12021AF4F00280E0014F10254282105
+:10A070003C0D08008DAD00502405012001B358218E
+:10A08000316C007F01705024019A48210131202158
+:10A090000E0014F1AF4A00283C0808008D08005457
+:10A0A0003C0508008CA500640113382130E6007FD0
+:10A0B00000F0182400DA202100912021AF4300286D
+:10A0C0000E0014F1000529403C0208008C420058A3
+:10A0D0003C1008008E1000601200001C0053882104
+:10A0E0002415FF800A0015743C14000C3226007FF2
+:10A0F0000235182400DA202102402821AF4300282D
+:10A10000009420210E0014F12610FFC01200000F51
+:10A11000023288212E05004110A0FFF42412100005
+:10A120003226007F001091800235182400DA2021A9
+:10A1300002402821AF430028009420210E0014F192
+:10A14000000080211600FFF3023288213C0B08003A
+:10A150008D6B005C240AFF802405000201734021FE
+:10A16000010A4824AF4900283C0408009484006296
+:10A170003110007F021A88213C07000C0E000CAA47
+:10A180000227982100402821026020218FBF00284B
+:10A190008FB500248FB400208FB3001C8FB200183D
+:10A1A0008FB100148FB000100A0014F127BD0030E9
+:10A1B0008F83001C8C62000410400003000000002C
+:10A1C00003E00008000000008C6400108C650008AB
+:08A1D0000A00152A8C66000C40
+:08A1D800000000000000001B64
+:10A1E0000000000F0000000A000000080000000648
+:10A1F000000000050000000500000004000000044D
+:10A200000000000300000003000000030000000342
+:10A210000000000300000002000000020000000235
 :10A220000000000200000002000000020000000226
 :10A230000000000200000002000000020000000216
-:10A240000000000200000001000000010000000109
-:10A2500008000F2408000D6C08000FB808001060FB
-:10A2600008000F4C08000F8C0800119408000D889E
-:10A27000080011B808000DD8080015540800151C76
-:10A2800008000D8808000D8808000D88080012409D
-:10A290000800124008000D8808000D88080014E02E
-:10A2A00008000D8808000D8808000D8808000D883A
-:10A2B000080013B408000D8808000D8808000D88F8
+:10A240000000000200000002000000020000000206
+:0CA25000000000010000000100000001FF
+:04A25C0008000F24C3
+:10A2600008000D6C08000FB80800106008000F4CC3
+:10A2700008000F8C0800119408000D88080011B820
+:10A2800008000DD8080015540800151C08000D889A
+:10A2900008000D8808000D880800124008001240D0
+:10A2A00008000D8808000D88080014E008000D88DB
+:10A2B00008000D8808000D8808000D88080013B4F8
 :10A2C00008000D8808000D8808000D8808000D881A
 :10A2D00008000D8808000D8808000D8808000D880A
-:10A2E00008000D8808000D8808000D8808000FACD4
-:10A2F00008000D8808000D880800167808000D88F1
-:10A3000008000D8808000D8808000D8808000D88D9
+:10A2E00008000D8808000D8808000D8808000D88FA
+:10A2F00008000D8808000D8808000FAC08000D88C4
+:10A3000008000D880800167808000D8808000D88E0
 :10A3100008000D8808000D8808000D8808000D88C9
 :10A3200008000D8808000D8808000D8808000D88B9
 :10A3300008000D8808000D8808000D8808000D88A9
-:10A340000800141008000D8808000D880800133458
-:10A35000080012A408001E2C08001EFC08001F1490
-:10A3600008001F2808001F3808001E2C08001E2C9B
-:10A3700008001E2C08001ED808002E1408002E1CF1
-:10A3800008002DE408002DF008002DFC08002E0820
-:10A39000080052E8080052A8080052740800524809
-:08A3A00008005224080051E0FE
-:08A3A8000A000C840000000013
-:10A3B000000000000000000D727870362E302E3143
-:10A3C0003500000006000F0300000000000000013F
-:10A3D000000000000000000000000000000000007D
+:10A3400008000D8808000D8808000D88080014100A
+:10A3500008000D8808000D8808001334080012A4B6
+:10A3600008001E2C08001EFC08001F1408001F28EF
+:10A3700008001F3808001E2C08001E2C08001E2C88
+:10A3800008001ED808002E1408002E1C08002DE41A
+:10A3900008002DF008002DFC08002E08080052F4DB
+:10A3A000080052B40800528008005254080052308D
+:04A3B000080051EC64
+:0CA3B4000A000C84000000000000000003
+:10A3C0000000000D727870362E322E310000000031
+:10A3D0000602010300000000000000010000000070
 :10A3E000000000000000000000000000000000006D
 :10A3F000000000000000000000000000000000005D
 :10A40000000000000000000000000000000000004C
@@ -3418,2392 +3419,2394 @@
 :10D5500000000000000000000000000000000000CB
 :10D5600000000000000000000000000000000000BB
 :10D5700000000000000000000000000000000000AB
-:10D58000000000000000000000000080000000001B
-:10D59000000000000000000000000000000000008B
-:10D5A0000000000000000000000000000000000A71
-:10D5B0000000000000000000000000001000000358
-:10D5C000000000000000000D0000000D3C020800FB
-:10D5D000244273203C030800246377ACAC40000075
-:10D5E0000043202B1480FFFD244200043C1D080052
-:10D5F00037BD7FFC03A0F0213C100800261032103C
-:10D600003C1C0800279C73200E0010FE0000000048
-:10D610000000000D30A5FFFF30C600FF274301804A
-:10D620008F4201B80440FFFE24020002AC640000F7
-:10D63000A4650008A066000AA062000B3C0210006E
-:10D64000AC67001803E00008AF4201B83C0360007B
-:10D650008C624FF80440FFFE3C020200AC644FC0F5
-:10D66000AC624FC43C02100003E00008AC624FF80B
-:10D670009482000C2486001400A0382100021302BA
-:10D68000000210800082402100C8102B104000577B
-:10D690000000000090C300002C62000950400051BF
-:10D6A00090C20001000310803C030800246372D084
-:10D6B000004310218C4200000040000800000000E0
-:10D6C00090C300012402000A1462003A0000000026
-:10D6D000010610232C42000A1440003624C6000222
-:10D6E0008CE2000034420100ACE2000090C2000075
-:10D6F00090C3000190C4000290C5000300031C0009
-:10D7000000021600004310250004220000441025EA
-:10D710000045102524C60004ACE2000490C20000BD
-:10D7200090C3000190C4000290C5000300021600DF
-:10D7300000031C00004310250004220000441025B3
-:10D740000045102524C600040A000CB8ACE200080D
-:10D7500090C30001240200041462001624C60002D3
-:10D7600090C2000090C400018CE30000000212008F
-:10D77000004410253463000424C60002ACE2000C0F
-:10D780000A000CB8ACE3000090C3000124020003BF
-:10D790001462000824C600028CE2000090C300005E
-:10D7A00024C6000134420008A0E300100A000CB8AF
-:10D7B000ACE2000003E000082402000190C3000175
-:10D7C000240200021062000224C400020100202191
-:10D7D0000A000CB8008030210A000CB824C60001F1
-:10D7E00090C200010A000CB800C2302103E000081A
-:10D7F0000000102127BDFFE8AFBF0014AFB000103C
-:10D800000E00130200808021936200052403FFFEB6
-:10D8100002002021004310248FBF00148FB000109D
-:10D82000A36200050A00130B27BD001827BDFFE8FF
-:10D83000AFB00010AFBF00140E000F3C008080217D
-:10D840009362000024030050304200FF14430004A0
-:10D8500024020100AF4201800A000D3002002021A5
-:10D86000AF400180020020218FBF00148FB0001054
-:10D870000A000FE727BD001827BDFF80AFBE007864
-:10D88000AFB70074AFB20060AFBF007CAFB600703E
-:10D89000AFB5006CAFB40068AFB30064AFB1005C6B
-:10D8A000AFB000588F5001283C0208008C4231A0D4
-:10D8B0002403FF809365003F0202102100431024DF
-:10D8C000AF4200243C0208008C4231A09364000562
-:10D8D00030B200FF020210213042007F03421821C3
-:10D8E000000420273C02000A006218213084000155
-:10D8F000AF8300140000F0210000B8211480005311
-:10D90000AFA0005093430116934401128F450104C8
-:10D91000306300FF3C020001308400FF00A2282495
-:10D92000034310210344182124564000246740007B
-:10D9300014A001CD2402000193620000304300FFD7
-:10D94000240200201062000524020050106200062C
-:10D95000000000000A000D74000000000000000D2F
-:10D960000A000D7DAFA000303C1E080027DE736C5E
-:10D970000A000D7DAFA000303C0208008C4200DCA4
-:10D98000244200013C010800AC2200DC0E00139F81
-:10D99000000000000A000F318FBF007C8F4201049D
-:10D9A0003C03002092D3000D004310240002202BE2
-:10D9B00000042140AFA400308F4301043C0200402A
-:10D9C0000062182414600002348500400080282181
-:10D9D00032620020AFA500301440000234A600805F
-:10D9E00000A0302110C0000BAFA6003093C5000886
-:10D9F0008F67004C0200202100052B0034A5008118
-:10DA000030A5F0810E000C9B30C600FF0A000F2EDF
-:10DA1000000000009362003E304200401040000FC2
-:10DA200024020004564200072402001202002021B2
-:10DA300000E028210E0013F702C030210A000F3148
-:10DA40008FBF007C16420005000000000E000D2173
-:10DA5000000020210A000F318FBF007C9743011A7C
-:10DA600096C4000E93620035326500043075FFFFE6
-:10DA700000442004AFA400548ED1000410A000156F
-:10DA80008ED400089362003E3042004010400007F0
-:10DA9000000000000E0013E0022020211040000DC5
-:10DAA000000000000A000F2E000000008F620044FA
-:10DAB000022210230440016A000000008F62004827
-:10DAC0000222102304410166240400160A000E21DC
-:10DAD0008FC200048F620048022210230440000815
-:10DAE000000000003C0208008C423100244200018A
-:10DAF0003C010800AC2231000A000F2300000000A6
-:10DB00008F62004002221023184000128F840014FC
-:10DB10003C0208008C423100327300FC0000A82156
-:10DB2000244200013C010800AC2231008F63004018
-:10DB30009482011C022318233042FFFF0043102A65
-:10DB4000504000102402000C8F6200400A000DF2C9
-:10DB5000022210239483011C9762003C0043102B87
-:10DB600010400006000000009482011C00551023A4
-:10DB7000A482011C0A000DF72402000CA480011CE1
-:10DB80002402000CAFA200308F620040005120231D
-:10DB90001880000D02A4102A144001260000000085
-:10DBA0001495000602A410233A62000130420001DD
-:10DBB000144001200000000002A410230224882148
-:10DBC0000A000E093055FFFF0000202132620002DA
-:10DBD0001040001A326200109362003E3042004052
-:10DBE000504000118FC200040E00130202002021D9
-:10DBF00024020018A362003F936200052403FFFE85
-:10DC000002002021004310240E00130BA362000524
-:10DC100024040039000028210E0013C9240600182E
-:10DC20000A000F3024020001240400170040F80904
-:10DC3000000000000A000F3024020001104001081B
-:10DC4000000000008F63004C8F620054028210239A
-:10DC50001C40010302831023044200010060A02144
-:10DC6000AFA40018AFB10010AFB50014934201206B
-:10DC70008F6500409763003C304200FF0342102153
-:10DC8000004410218FA400543063FFFF2442400061
-:10DC90000083182B8FA40030AFA20020AFA500286E
-:10DCA00000832025AFA40030AFA50024AFA0002C36
-:10DCB000AFB400349362003E30420008504000117F
-:10DCC0008FC2000002C0202127A500380E000CB230
-:10DCD000AFA000385440000B8FC200008FA2003864
-:10DCE00030420100504000078FC200008FA3003C6B
-:10DCF0008F6200600062102304430001AF63006084
-:10DD00008FC200000040F80927A400108FA2003045
-:10DD10003042000254400001327300FE9362003E24
-:10DD200030420040104000378FA200248F62005420
-:10DD30001682001A326200012402001412420010FE
-:10DD40002A42001510400006240200162402000C8E
-:10DD500012420007326200010A000E7D000000003E
-:10DD600012420005326200010A000E7D0000000030
-:10DD70000A000E782417000E0A000E7824170010EF
-:10DD80000A000E7C24170012936200232403FFBDB7
-:10DD900000431024A36200233262000110400019E6
-:10DDA0008FA200242402000C1242000E2A42000D11
-:10DDB000104000062402000E2402000A124200074E
-:10DDC0008FA200240A000E9524420001124200088E
-:10DDD0008FA200240A000E95244200010A000E932F
-:10DDE000241700082402000E16E200022417001671
-:10DDF000241700108FA2002424420001AFA20024A7
-:10DE00008FA200248FA300148F76004000431021BE
-:10DE1000AF6200408F8200149442011C1040000940
-:10DE2000000000008F6200488F6400409763003C50
-:10DE3000004410233063FFFF0043102A1040000805
-:10DE40008FA20054936400368F6300403402FFFCBD
-:10DE50000082100400621821AF6300488FA20054B2
-:10DE60008FA600300282902130C200081040000EC0
-:10DE7000000000008F6200581642000430C600FF08
-:10DE80009742011A5040000134C6001093C50008A3
-:10DE90008FA700340200202100052B0034A500804C
-:10DEA0000E000C9B30A5F0808F62004000561023BE
-:10DEB0001840001B8FA200183C0208008C423198C9
-:10DEC000304200101040000D2402000197620068EB
-:10DED0001440000A240200018F8200149442011CA5
-:10DEE0001440000624020001A76200689742007AED
-:10DEF000244200640A000EE9A7620012A762001221
-:10DF00000E001302020020219362007D2403000111
-:10DF100002002021344200010A000EE7AFA30050A6
-:10DF20001840000A000000000E0013020200202129
-:10DF30009362007D2403000102002021AFA3005062
-:10DF4000344200040E00130BA362007D9362003E76
-:10DF5000304200401440000C326200011040000AC0
-:10DF6000000000008F6300408FC2000424040018EA
-:10DF7000246300010040F809AF6300408FA2003025
-:10DF80000A000F30304200048F6200581052001017
-:10DF9000000000008F620018022210231C400008BD
-:10DFA000240400018F6200181622000900000000FE
-:10DFB0008F62001C02821023044000050000000054
-:10DFC000AF720058AFA40050AF710018AF74001CBE
-:10DFD00012E0000B8FA200500E001302020020215D
-:10DFE000A377003F0E00130B0200202102E0302136
-:10DFF000240400370E0013C9000028218FA200500E
-:10E0000010400003000000000E000CA902002021B7
-:10E0100012A00005000018218FA200303042000439
-:10E020005040001100601021240300010A000F304D
-:10E03000006010210E001302020020219362007D77
-:10E0400002002021344200040E00130BA362007D65
-:10E050000E000CA9020020210A000F30240200014A
-:10E06000AF400044240200018FBF007C8FBE0078C7
-:10E070008FB700748FB600708FB5006C8FB40068D6
-:10E080008FB300648FB200608FB1005C8FB0005816
-:10E0900003E0000827BD00808F4201B80440FFFE66
-:10E0A00024020800AF4201B803E0000800000000AD
-:10E0B0003C02000803421021944200483084FFFFD4
-:10E0C000248400123045FFFF10A0001700A4102B7D
-:10E0D0001040001624020003934201202403001A7A
-:10E0E000A343018B304200FF2446FFFE8F820000D5
-:10E0F00000A6182B3863000100021382004310248D
-:10E10000104000058F84000434820001A74601946A
-:10E1100003E00008AF8200042402FFFE0082102406
-:10E1200003E00008AF8200042402000303E00008BB
-:10E13000A342018B27BDFFE0AFB10014AFB00010C8
-:10E14000AFBF001830B0FFFF30D1FFFF8F4201B8E2
-:10E150000440FFFE00000000AF440180AF440020F7
-:10E160000E000F42020020218F8300008F840004E4
-:10E17000A750019AA750018EA74301908F830008F2
-:10E1800030828000AF4301A8A75101881040000EE3
-:10E190008F82000493420116304200FC24420004A6
-:10E1A000005A10218C4240003042FFFF144000060C
-:10E1B0008F8200043C02FFFF34427FFF0082102464
-:10E1C000AF8200048F8200042403BFFF00431024A9
-:10E1D000A74201A69743010C8F42010400031C00D3
-:10E1E0003042FFFF00621825AF4301AC3C02100033
-:10E1F000AF4201B88FBF00188FB100148FB000106C
-:10E2000003E0000827BD00208F47007093420112F1
-:10E210008F83000027BDFFF0304200FF00022882FC
-:10E2200030620100000030211040004324A40003AC
-:10E230003062400010400010306220000004108066
-:10E24000005A10218C43400024A4000400041080D4
-:10E25000AFA30000005A10218C424000AFA200047E
-:10E2600093420116304200FC005A10218C424000BB
-:10E270000A000FC0AFA200081040002F000030219C
-:10E2800000041080005A10218C43400024A4000494
-:10E2900000041080AFA30000005A10218C424000FF
-:10E2A000AFA00008AFA200048FA800080000302132
-:10E2B00000002021240A00083C090800252901004B
-:10E2C00003A41021148A000300042A001100000A8C
-:10E2D0000000000090420000248400012C83000C08
-:10E2E00000A2102100021080004910218C42000081
-:10E2F0001460FFF300C230263C0408008C84310413
-:10E300008F4200702C8300201060000900473823E2
-:10E310003C030800246331080004108000431021EE
-:10E3200024830001AC4700003C010800AC23310409
-:10E33000AF8600082406000100C0102103E0000899
-:10E3400027BD00103C0208008C42003827BDFFD0DA
-:10E35000AFB50024AFB40020AFB10014AFBF0028A8
-:10E36000AFB3001CAFB20018AFB00010000088219E
-:10E370003C15080026B50038144000022454FFFF65
-:10E380000000A0219742010E8F8400003042FFFF61
-:10E39000308340001060000A245200043C02002038
-:10E3A0000082102450400007308280008F820004D9
-:10E3B0002403BFFF008318240A0010103442100009
-:10E3C000308280001040000A3C02002000821024AD
-:10E3D000104000078F8200043C03FFFF34637FFF7F
-:10E3E0000083182434428000AF820004AF83000011
-:10E3F0000E000F980000000014400007000000000D
-:10E400009743011E9742011C3063FFFF0002140076
-:10E4100000621825AF8300089742010C8F4340002B
-:10E420003045FFFF3402FFFF1462000300000000CC
-:10E430000A001028241100208F42400030420100C1
-:10E4400054400001241100108F840000308210001D
-:10E450005040001436310001308200201440000B7F
-:10E460003C021000008210245040000E36310001A2
-:10E470003C030E003C020DFF008318243442FFFFD2
-:10E480000043102B50400007363100013C020800C9
-:10E490008C42002C244200013C010800AC22002CDC
-:10E4A000363100053C0608008CC6003454C00023F9
-:10E4B0008F8500008F820004304240005440001FCE
-:10E4C0008F8500003C021F01008210243C031000D5
-:10E4D0005443001A8F85000030A202001440001738
-:10E4E0008F8500003250FFFF363100028F4201B8A5
-:10E4F0000440FFFE00000000AF4001800200202128
-:10E500000E000F42AF4000208F8300042402BFFFA3
-:10E51000A750019A006218248F820000A750018E34
-:10E52000A7510188A74301A6A74201903C02100011
-:10E53000AF4201B80A0010F5000010213C021000A3
-:10E5400000A210241040003A0000000010C0000F8C
-:10E550000000000030A201001040000C3C0302004B
-:10E560003C020F0000A2102410430008000000002D
-:10E570008F8200080054102400551021904200049E
-:10E58000244200040A00109F000221C00000000085
-:10E59000000516023050000F3A0300022E4203EF2E
-:10E5A000384200012C6300010062182414600073DB
-:10E5B000240200013C0308008C6300D02E06000CEE
-:10E5C000386200012C42000100461024144000155E
-:10E5D000001021C02602FFFC2C4200045440001110
-:10E5E00000002021386200022C4200010046102465
-:10E5F00010400003000512420A00109F0000202175
-:10E600000010182B0043102450400006001021C0B9
-:10E61000000020213245FFFF0E000F633226FFFB72
-:10E62000001021C03245FFFF0A0010F2362600021A
-:10E630008F4240003C0308008C63002430420100FC
-:10E640001040004630620001322200043070000D9C
-:10E65000144000022413000424130002000512C217
-:10E66000384200012E4303EF3042000138630001BD
-:10E6700000431025104000033231FFFB2402FFFB52
-:10E680000202802410C000183202000130A20100F2
-:10E6900010400015320200013C020F0000A21024BD
-:10E6A0003C0302001043000F8F8200082403FFFE8A
-:10E6B00002038024005410240055102190420004CD
-:10E6C000023330252442000412000002000221C05F
-:10E6D0003226FFFF0E000F633245FFFF12000027B6
-:10E6E00000001021320200011040000D320200042F
-:10E6F0002402000112020002023330253226FFFFFD
-:10E70000000020210E000F633245FFFF2402FFFEB0
-:10E7100002028024120000190000102132020004BD
-:10E72000104000162402000124020004120200021C
-:10E73000023330253226FFFF3245FFFF0E000F6304
-:10E74000240401002402FFFB020280241200000BBB
-:10E75000000010210A0010F52402000110400007FB
-:10E76000000010213245FFFF362600020000202164
-:10E770000E000F6300000000000010218FBF002872
-:10E780008FB500248FB400208FB3001C8FB2001807
-:10E790008FB100148FB0001003E0000827BD0030D7
-:10E7A00027BDFFD0AFB000103C04600CAFBF002C01
-:10E7B000AFB60028AFB50024AFB40020AFB3001C43
-:10E7C000AFB20018AFB100148C8250002403FF7F59
-:10E7D0003C1A8000004310243442380CAC825000B4
-:10E7E000240200033C106000AF4200088E020808BB
-:10E7F0003C1B80083C010800AC2000203042FFF0A8
-:10E80000384200102C4200010E001B85AF82001818
-:10E810003C04FFFF3C020400348308063442000C31
-:10E82000AE021948AE03194C3C0560168E021980E1
-:10E830008CA300003442020000641824AE02198048
-:10E840003C0253531462000334A47C008CA20004E5
-:10E85000005020218C82007C8C830078AF820010D5
-:10E86000AF83000C8F55000032A200031040FFFD63
-:10E8700032A200011040013D32A200028F42012865
-:10E88000AF4200208F4201048F430100AF8200009D
-:10E890000E000F3CAF8300043C0208008C4200C015
-:10E8A000104000088F8400003C0208008C4200C425
-:10E8B000244200013C010800AC2200C40A00126995
-:10E8C000000000003C020010008210241440010CE3
-:10E8D0008F8300043C0208008C4200203C030800A7
-:10E8E0008C63003800008821244200013C010800AC
-:10E8F000AC2200203C16080026D600381460000226
-:10E900002474FFFF0000A0219742010E30834000D5
-:10E910003042FFFF1060000A245200043C02002035
-:10E920000082102450400007308280008F82000453
-:10E930002403BFFF008318240A0011703442100022
-:10E94000308280001040000A3C0200200082102427
-:10E95000104000078F8200043C03FFFF34637FFFF9
-:10E960000083182434428000AF820004AF8300008B
-:10E970000E000F9800000000144000070000000087
-:10E980009743011E9742011C3063FFFF00021400F1
-:10E9900000621825AF8300089742010C8F434000A6
-:10E9A0003045FFFF3402FFFF146200030000000047
-:10E9B0000A001188241100208F42400030420100DB
-:10E9C00054400001241100108F8400003082100098
-:10E9D0005040001436310001308200201440000BFA
-:10E9E0003C021000008210245040000E363100011D
-:10E9F0003C030E003C020DFF008318243442FFFF4D
-:10EA00000043102B50400007363100013C02080043
-:10EA10008C42002C244200013C010800AC22002C56
-:10EA2000363100053C0608008CC6003454C0002373
-:10EA30008F8500008F820004304240005440001F48
-:10EA40008F8500003C021F01008210243C0310004F
-:10EA50005443001A8F85000030A2020014400017B2
-:10EA60008F8500003250FFFF363100028F4201B81F
-:10EA70000440FFFE00000000AF40018002002021A2
-:10EA80000E000F42AF4000208F8300042402BFFF1E
-:10EA9000A750019A006218248F820000A750018EAF
-:10EAA000A7510188A74301A6A74201903C0210008C
-:10EAB000AF4201B80A001267000010213C021000AA
-:10EAC00000A210241040003A0000000010C0000F07
-:10EAD0000000000030A201001040000C3C030200C6
-:10EAE0003C020F0000A210241043000800000000A8
-:10EAF0008F82000800541024005610219042000418
-:10EB0000244200040A0011FF000221C0000000009E
-:10EB1000000516023050000F3A0300022E4203EFA8
-:10EB2000384200012C630001006218241460008543
-:10EB3000240200013C0308008C6300D02E06000C68
-:10EB4000386200012C4200010046102414400015D8
-:10EB5000001021C02602FFFC2C420004544000118A
-:10EB600000002021386200022C42000100461024DF
-:10EB700050400003000512420A0011FF000020214E
-:10EB80000010182B0043102450400006001021C034
-:10EB9000000020213245FFFF0E000F633226FFFBED
-:10EBA000001021C03245FFFF0A0012523626000233
-:10EBB0008F4240003C0308008C6300243042010077
-:10EBC0001040004630620001322200043070000D17
-:10EBD000144000022413000424130002000512C292
-:10EBE000384200012E4303EF304200013863000138
-:10EBF00000431025104000033231FFFB2402FFFBCD
-:10EC00000202802410C000183202000130A201006C
-:10EC100010400015320200013C020F0000A2102437
-:10EC20003C0302001043000F8F8200082403FFFE04
-:10EC30000203802400541024005610219042000446
-:10EC4000023330252442000412000002000221C0D9
-:10EC50003226FFFF0E000F633245FFFF120000391E
-:10EC600000001021320200011040000D32020004A9
-:10EC70002402000112020002023330253226FFFF77
-:10EC8000000020210E000F633245FFFF2402FFFE2B
-:10EC9000020280241200002B000010213202000426
-:10ECA0001040002824020001240200041202000285
-:10ECB000023330253226FFFF3245FFFF0E000F637F
-:10ECC000240401002402FFFB020280241200001D24
-:10ECD000000010210A0012672402000150400019B0
-:10ECE000000010213245FFFF3626000200002021DF
-:10ECF0000E000F63000000000A00126700001021E0
-:10ED00002402BFFF00621024104000080000000031
-:10ED1000240287FF00621024144000083C020060B7
-:10ED20000082102410400005000000000E000D3489
-:10ED3000000000000A001267000000000E0012C769
-:10ED400000000000104000063C0240008F430124F8
-:10ED50003C026020AC430014000000003C02400074
-:10ED6000AF4201380000000032A200021040FEBD98
-:10ED7000000000008F4201403C044000AF420020F0
-:10ED80008F4301483C027000006218241064004266
-:10ED9000000000000083102B144000063C026000BD
-:10EDA0003C022000106200073C0240000A0012C32F
-:10EDB000000000001062003C3C0240000A0012C348
-:10EDC000000000008F4501408F4601448F420148FA
-:10EDD00000021402304300FF240200041462000AFF
-:10EDE000274401808F4201B80440FFFE2402001C2A
-:10EDF000AC850000A082000B3C021000AF4201B8BD
-:10EE00000A0012C33C0240002402000914620012EE
-:10EE100000061602000229C0AF4500208F4201B84B
-:10EE20000440FFFE2402000124030003AF450180DB
-:10EE3000A343018BA740018EA740019AA7400190F0
-:10EE4000AF4001A8A7420188A74201A6AF4001AC8C
-:10EE50003C021000AF4201B88F4201B80440FFFEEF
-:10EE600000000000AC8500008F420148000214023F
-:10EE7000A482000824020002A082000B8F420148F5
-:10EE8000A48200103C021000AC860024AF4201B8FE
-:10EE90000A0012C33C0240000E00131000000000E4
-:10EEA0000A0012C33C0240000E001BBA0000000022
-:10EEB0003C024000AF420178000000000A00112F20
-:10EEC000000000008F4201003042003E144000115B
-:10EED00024020001AF4000488F420100304207C0C9
-:10EEE0001040000500000000AF40004CAF40005053
-:10EEF00003E0000824020001AF400054AF4000408E
-:10EF00008F4201003042380054400001AF400044BD
-:10EF10002402000103E00008000000008F4201B855
-:10EF20000440FFFE24020001AF440180AF40018491
-:10EF3000A7450188A342018A24020002A342018B53
-:10EF40009742014A14C00004A7420190AF4001A4B7
-:10EF50000A0012EF3C0210008F420144AF4201A4AC
-:10EF60003C021000AF4001A803E00008AF4201B826
-:10EF70008F4201B80440FFFE24020002AF4401802A
-:10EF8000AF440184A7450188A342018AA342018BB3
-:10EF90009742014AA7420190AF4001A48F42014429
-:10EFA000AF4201A83C02100003E00008AF4201B8E4
-:10EFB0003C0290003442000100822025AF44002032
-:10EFC0008F4200200440FFFE0000000003E0000824
-:10EFD000000000003C028000344200010082202535
-:10EFE00003E00008AF44002027BDFFE8AFBF0014D6
-:10EFF000AFB000108F500140934301499342014844
-:10F0000093440148306300FF304200FF00021200C9
-:10F0100000622825240200191062007630840080E6
-:10F020002862001A1040001C24020020240200085C
-:10F0300010620077286200091040000E2402000BC5
-:10F0400024020001106200342862000250400005D2
-:10F050002402000650600034020020210A00139AA6
-:10F060000000000010620030020020210A00139A04
-:10F07000000000001062003B2862000C50400002BB
-:10F080002402000E24020009106200560200202112
-:10F090000A00139A00000000106200562862002146
-:10F0A0001040000F240200382402001C1062005897
-:10F0B0002862001D104000062402001F2402001BCD
-:10F0C0001062004C000000000A00139A00000000CB
-:10F0D0001062004A020020210A00139A000000007A
-:10F0E00010620045286200391040000724020080A9
-:10F0F0002462FFCB2C420002104000450200202178
-:10F100000A00139600003021106200090000000080
-:10F110000A00139A000000001480003D0200202124
-:10F120000A0013908FBF00140A00139624060001F2
-:10F130008F4201B80440FFFE24020002A342018B6B
-:10F14000A74501889742014AA74201908F42014496
-:10F15000A74201923C021000AF4201B80A00139C82
-:10F160008FBF00149742014A14400029000000009C
-:10F1700093620005304200041440002500000000A6
-:10F180000E001302020020219362000502002021DC
-:10F19000344200040E00130BA362000593620005C5
-:10F1A0003042000414400002000000000000000D86
-:10F1B0009362000024030020304200FF1443001437
-:10F1C000000000008F4201B80440FFFE2402000549
-:10F1D000AF500180A342018B3C0210000A00139A39
-:10F1E000AF4201B88FBF00148FB000100A0012F2B6
-:10F1F00027BD00180000000D020020210000302172
-:10F200008FBF00148FB000100A0012DD27BD001858
-:10F210000000000D8FBF00148FB0001003E0000845
-:10F2200027BD001827BDFFE8AFBF00100E000F3C40
-:10F2300000000000AF4001808FBF001000002021BF
-:10F240000A000FE727BD00183084FFFF30A5FFFF3D
-:10F25000000018211080000700000000308200012B
-:10F260001040000200042042006518210A0013AB80
-:10F270000005284003E000080060102110C00006CF
-:10F2800024C6FFFF8CA2000024A50004AC8200006D
-:10F290000A0013B52484000403E000080000000005
-:10F2A00010A0000824A3FFFFAC86000000000000AF
-:10F2B000000000002402FFFF2463FFFF1462FFFA36
-:10F2C0002484000403E0000800000000308300FFF5
-:10F2D00030A500FF30C600FF274701808F4201B8EC
-:10F2E0000440FFFE000000008F420128346340000C
-:10F2F000ACE2000024020001ACE00004A4E300083A
-:10F30000A0E2000A24020002A0E2000B3C0210006E
-:10F31000A4E50010ACE00024ACE00028A4E6001254
-:10F3200003E00008AF4201B827BDFFE8AFBF0010FF
-:10F330009362003F24030012304200FF1043000D8F
-:10F34000008030218F620044008210230440000AB4
-:10F350008FBF00108F62004824040039000028216C
-:10F3600000C2102304410004240600120E0013C939
-:10F37000000000008FBF00102402000103E000081D
-:10F3800027BD001827BDFFC8AFB20030AFB1002CB9
-:10F39000AFBF0034AFB0002890C5000D00809021B1
-:10F3A00030A400101080000B00C088218CC300081E
-:10F3B0008F6200541062000730A20005144000B5AF
-:10F3C000240400010E000D21000020210A0014BBBE
-:10F3D0000040202130A200051040000930A3001297
-:10F3E000108000AC240400018E2300088F620054BA
-:10F3F000146200A98FBF00340A00142C24040038C2
-:10F4000024020012146200A324040001022020211F
-:10F4100027A500100E000CB2AFA000101040001184
-:10F42000024020218E220008AF620084AF600040BD
-:10F430000E001302000000009362007D02402021B4
-:10F44000344200200E00130BA362007D0E000CA9B5
-:10F4500002402021240400382405008D0A0014B83D
-:10F46000240600129362003E304200081040000F54
-:10F470008FA2001030420100104000078FA300143B
-:10F480008F6200600062102304430008AF630060D5
-:10F490000A00144100000000AF6000609362003E6B
-:10F4A0002403FFF700431024A362003E9362003E52
-:10F4B00030420008144000022406000300003021FE
-:10F4C00093620034936300378F640084304200FFFE
-:10F4D000306300FF006618210003188000432821D4
-:10F4E00000A4202B1080000B000000009763003C5C
-:10F4F0008F6200843063FFFF004510230062182BE9
-:10F5000014600004000000008F6200840A00145D93
-:10F51000004580239762003C3050FFFF8FA300100E
-:10F520003062000410400004000628808FA2001CF6
-:10F530000A0014650202102B2E020218504000032C
-:10F54000240202180A00146E02051023306300041E
-:10F5500010600003004510238FA2001C00451023FB
-:10F56000004080212C420080544000012410008083
-:10F570000E0013020240202124020001AF62000CA1
-:10F580009362003E001020403042007FA362003EA4
-:10F590008E22000424420001AF620040A770003CAC
-:10F5A0008F6200509623000E00431021AF62005876
-:10F5B0008F62005000441021AF62005C8E22000474
-:10F5C000AF6200188E220008AF62001C8FA20010EC
-:10F5D000304200085440000A93A20020A360003685
-:10F5E000936200362403FFDFA36200359362003E7E
-:10F5F00000431024A362003E0A0014988E220008E3
-:10F60000A36200358E220008AF62004C8F62002496
-:10F610008F63004000431021AF62004893620000F6
-:10F6200024030050304200FF144300122403FF80E3
-:10F630003C0208008C4231A00242102100431024F9
-:10F64000AF4200283C0208008C4231A08E24000802
-:10F650003C03000C024210213042007F0342102183
-:10F6600000431021AC4400D88E230008AF82001460
-:10F67000AC4300DC0E00130B0240202124040038B0
-:10F68000000028212406000A0E0013C90000000013
-:10F69000240400018FBF00348FB200308FB1002CE2
-:10F6A0008FB000280080102103E0000827BD00383B
-:10F6B00027BDFFF827420180AFA20000308A00FF7B
-:10F6C0008F4201B80440FFFE000000008F46012871
-:10F6D0003C0208008C4231A02403FF80AF86004822
-:10F6E00000C2102100431024AF4200243C02080055
-:10F6F0008C4231A08FA900008FA8000000C2102109
-:10F700003042007F034218213C02000A00621821A7
-:10F71000946400D48FA700008FA50000240200028B
-:10F72000AF830014A0A2000B8FA30000354260003D
-:10F730003084FFFFA4E200083C021000AD26000068
-:10F74000AD040004AC60002427BD0008AF4201B83E
-:10F7500003E00008240200018F88003C9382002807
-:10F760008F8300143C07080024E7777800481023B3
-:10F77000304200FF304900FC246500888F8600403D
-:10F78000304A0003112000090000202124820004D7
-:10F790008CA30000304400FF0089102AACE3000075
-:10F7A00024A500041440FFF924E7000411400009D7
-:10F7B000000020212482000190A30000304400FFBB
-:10F7C000008A102BA0E3000024A500011440FFF9DB
-:10F7D00024E7000130C20003144000048F85003C80
-:10F7E000310200031040000D0000000010A00009CD
-:10F7F000000020212482000190C30000304400FF5B
-:10F800000085102BA0E3000024C600011440FFF97E
-:10F8100024E7000103E00008000000001100FFFDE4
-:10F8200000002021248200048CC30000304400FF2B
-:10F830000088102BACE3000024C600041440FFF93C
-:10F8400024E7000403E00008000000008F83003C70
-:10F850009382002830C600FF30A500FF004310232C
-:10F86000304300FF8F8200140080382100431021B4
-:10F8700014C00002244800880083382130E20003CD
-:10F880001440000530A2000314400003306200035E
-:10F890001040000D0000000010A000090000202111
-:10F8A0002482000190E30000304400FF0085102B0B
-:10F8B000A103000024E700011440FFF9250800011E
-:10F8C00003E000080000000010A0FFFD0000202160
-:10F8D000248200048CE30000304400FF0085102BDC
-:10F8E000AD03000024E700041440FFF925080004DC
-:10F8F00003E00008000000000080482130AAFFFF5C
-:10F9000030C600FF30E7FFFF274801808F4201B873
-:10F910000440FFFE8F820048AD0200008F420124A8
-:10F92000AD0200048D220020A5070008A102000AF4
-:10F9300024020016A102000B934301208D2200082F
-:10F940008D240004306300FF004310219783003AA8
-:10F95000004410218D250024004310233C0308009F
-:10F960008C6331A08F840014A502000C246300E88E
-:10F970002402FFFFA50A000EA5030010A506001231
-:10F98000AD050018AD020024948201142403FFF792
-:10F990003042FFFFAD0200288C820118AD02002C1E
-:10F9A0003C021000AD000030AF4201B88D220020B3
-:10F9B0000043102403E00008AD2200208F820014D1
-:10F9C00030E7FFFF00804821904200D330A5FFFFC1
-:10F9D00030C600FF0002110030420F0000E238255F
-:10F9E000274801808F4201B80440FFFE8F82004803
-:10F9F000AD0200008F420124AD0200048D220020E0
-:10FA0000A5070008A102000A24020017A102000BAA
-:10FA1000934301208D2200088D240004306300FFF1
-:10FA2000004310219783003A004410218F84001472
-:10FA3000004310233C0308008C6331A0A502000C96
-:10FA4000A505000E246300E8A5030010A50600121A
-:10FA5000AD0000148D220024AD0200188C82005CE1
-:10FA6000AD02001C8C820058AD0200202402FFFF72
-:10FA7000AD020024948200E63042FFFFAD02002870
-:10FA800094820060948300BE30427FFF3063FFFFAA
-:10FA90000002120000431021AD02002C3C021000B5
-:10FAA000AD000030AF4201B8948200BE2403FFF7DE
-:10FAB00000A21021A48200BE8D2200200043102449
-:10FAC00003E00008AD220020274301808F4201B8E7
-:10FAD0000440FFFE8F8200249442001C3042FFFF4E
-:10FAE000000211C0AC62000024020019A062000BE9
-:10FAF0003C021000AC60003003E00008AF4201B8E7
-:10FB00008F87002C30C300FF8F4201B80440FFFEF6
-:10FB10008F82004834636000ACA2000093820044EE
-:10FB2000A0A200058CE20010A4A20006A4A3000875
-:10FB30008C8200202403FFF7A0A2000A2402000206
-:10FB4000A0A2000B8CE20000ACA200108CE200042A
-:10FB5000ACA200148CE2001CACA200248CE20020B9
-:10FB6000ACA200288CE2002CACA2002C8C820024D9
-:10FB7000ACA200183C021000AF4201B88C820020F9
-:10FB80000043102403E00008AC8200208F8600149C
-:10FB900027BDFFE8AFBF0014AFB0001090C20063F4
-:10FBA000304200201040000830A500FF8CC2007CCD
-:10FBB0002403FFDF24420001ACC2007C90C200633A
-:10FBC00000431024A0C2006310A000238F83001400
-:10FBD00027500180020028210E0015D6240600823D
-:10FBE0008F82001490420063304200405040001960
-:10FBF000A38000448F83002C8F4201B80440FFFE95
-:10FC00008F820048AE02000024026082A602000833
-:10FC100024020002A202000B8C620008AE02001057
-:10FC20008C62000CAE0200148C620014AE0200184C
-:10FC30008C620018AE0200248C620024AE02002800
-:10FC40008C620028AE02002C3C021000AF4201B8CA
-:10FC5000A38000448F8300148FBF00148FB0001066
-:10FC60009062006327BD00183042007FA0620063ED
-:10FC70009782003A8F86003C8F850014938300287A
-:10FC800000461023A782003AA4A000E490A40063D9
-:10FC90008F820040AF83003C2403FFBF0046102149
-:10FCA00000832024AF820040A0A400638F82001450
-:10FCB000A04000BD8F82001403E00008A44000BEF5
-:10FCC0008F8A001427BDFFE0AFB10014AFB0001061
-:10FCD0008F88003CAFBF00189389001C954200E458
-:10FCE00030D100FF0109182B0080802130AC00FFCB
-:10FCF0003047FFFF0000582114600003310600FF69
-:10FD000001203021010958239783003A0068102B05
-:10FD10001440003C000000001468000724020001A9
-:10FD20008E0200202403FFFB34E7800000431024F0
-:10FD3000AE0200202402000134E70880158200058D
-:10FD40003165FFFF0E001554020020210A001691B4
-:10FD5000020020210E001585020020218F8400481A
-:10FD6000274301808F4201B80440FFFE240200189F
-:10FD7000AC640000A062000B8F840014948200E643
-:10FD8000A46200103C021000AC600030AF4201B829
-:10FD90009482006024420001A4820060948200608A
-:10FDA0003C0308008C63318830427FFF5443000FCE
-:10FDB000020020219482006024038000004310246C
-:10FDC000A48200609082006090830060304200FF57
-:10FDD000000211C200021027000211C03063007F30
-:10FDE00000621825A0830060020020210220282143
-:10FDF0008FBF00188FB100148FB000100A0015F9E2
-:10FE000027BD0020914200632403FF80004310259A
-:10FE1000A14200639782003A3048FFFF11000020A2
-:10FE20009383001C8F840014004B1023304600FF86
-:10FE3000948300E42402EFFF0168282B0062182459
-:10FE4000A48300E414A000038E02002001005821C6
-:10FE5000000030212403FFFB34E78000004310241E
-:10FE6000AE02002024020001158200053165FFFF6B
-:10FE70000E001554020020210A0016B99783003A9B
-:10FE80000E001585020020219783003A8F82003CE6
-:10FE9000A780003A00431023AF82003C9383001CEC
-:10FEA0008F8200148FBF00188FB100148FB0001024
-:10FEB00027BD002003E00008A04300BD938200445A
-:10FEC0002403000127BDFFE8004330042C4200203A
-:10FED000AFB00010AFBF00142410FFFE10400005AB
-:10FEE000274501803C0208008C4231900A0016D65A
-:10FEF000004610243C0208008C4231940046102435
-:10FF000014400007240600848F8300142410FFFF90
-:10FF1000906200623042000F34420040A0620062F2
-:10FF20000E0015D600000000020010218FBF001443
-:10FF30008FB0001003E0000827BD00188F83002455
-:10FF400027BDFFE0AFB20018AFB10014AFB0001092
-:10FF5000AFBF001C9062000D00A0902130D100FFC7
-:10FF60003042007FA062000D8F8500148E43001880
-:10FF7000008080218CA2007C146200052402000E07
-:10FF800090A20063344200200A0016FFA0A2006382
-:10FF90000E0016C5A38200442403FFFF1043004750
-:10FFA0002404FFFF52200045000020218E43000062
-:10FFB0003C02001000621024504000043C02000883
-:10FFC000020020210A00170E2402001500621024EE
-:10FFD000504000098E450000020020212402001438
-:10FFE0000E0016C5A38200442403FFFF1043003314
-:10FFF0002404FFFF8E4500003C02000200A21024F2
+:10D58000000000000000000000000000000000009B
+:10D59000000000000000008000000000000000000B
+:10D5A000000000000000000000000000000000007B
+:10D5B00000000000000000000000000A0000000061
+:10D5C0000000000000000000100000030000000048
+:10D5D0000000000D0000000D3C02080024427320F2
+:10D5E0003C030800246377ACAC4000000043202BD0
+:10D5F0001480FFFD244200043C1D080037BD7FFC61
+:10D6000003A0F0213C100800261032103C1C08003A
+:10D61000279C73200E0010FE000000000000000D8B
+:10D6200030A5FFFF30C600FF274301808F4201B8BD
+:10D630000440FFFE24020002AC640000A465000860
+:10D64000A066000AA062000B3C021000AC67001844
+:10D6500003E00008AF4201B83C0360008C624FF861
+:10D660000440FFFE3C020200AC644FC0AC624FC4F9
+:10D670003C02100003E00008AC624FF89482000CFA
+:10D680002486001400A0382100021302000210803A
+:10D690000082402100C8102B1040005700000000FD
+:10D6A00090C300002C6200095040005190C200015C
+:10D6B000000310803C030800246372D00043102153
+:10D6C0008C420000004000080000000090C30001F0
+:10D6D0002402000A1462003A000000000106102330
+:10D6E0002C42000A1440003624C600028CE20000DE
+:10D6F00034420100ACE2000090C2000090C300017F
+:10D7000090C4000290C5000300031C000002160034
+:10D710000043102500042200004410250045102578
+:10D7200024C60004ACE2000490C2000090C30001D3
+:10D7300090C4000290C500030002160000031C0004
+:10D740000043102500042200004410250045102548
+:10D7500024C600040A000CB8ACE2000890C3000123
+:10D76000240200041462001624C6000290C20000C5
+:10D7700090C400018CE30000000212000044102558
+:10D780003463000424C60002ACE2000C0A000CB8AA
+:10D79000ACE3000090C300012402000314620008FF
+:10D7A00024C600028CE2000090C3000024C60001E1
+:10D7B00034420008A0E300100A000CB8ACE20000FC
+:10D7C00003E000082402000190C3000124020002CB
+:10D7D0001062000224C40002010020210A000CB8DB
+:10D7E000008030210A000CB824C6000190C200015C
+:10D7F0000A000CB800C2302103E00008000010212C
+:10D8000027BDFFE8AFBF0014AFB000100E00130239
+:10D8100000808021936200052403FFFE0200202186
+:10D82000004310248FBF00148FB00010A3620005C6
+:10D830000A00130B27BD001827BDFFE8AFB000108A
+:10D84000AFBF00140E000F3C0080802193620000E7
+:10D8500024030050304200FF14430004240201005E
+:10D86000AF4201800A000D3002002021AF4001804C
+:10D87000020020218FBF00148FB000100A000FE7B4
+:10D8800027BD001827BDFF80AFBE0078AFB700747A
+:10D89000AFB20060AFBF007CAFB60070AFB5006C38
+:10D8A000AFB40068AFB30064AFB1005CAFB0005874
+:10D8B0008F5001283C0208008C4231A02403FF80D5
+:10D8C0009365003F0202102100431024AF42002460
+:10D8D0003C0208008C4231A09364000530B200FF86
+:10D8E000020210213042007F034218210004202749
+:10D8F0003C02000A0062182130840001AF8300144A
+:10D900000000F0210000B82114800053AFA00050A7
+:10D9100093430116934401128F450104306300FFC5
+:10D920003C020001308400FF00A2282403431021A0
+:10D9300003441821245640002467400014A001CD60
+:10D940002402000193620000304300FF2402002003
+:10D950001062000524020050106200060000000062
+:10D960000A000D74000000000000000D0A000D7D8B
+:10D97000AFA000303C1E080027DE736C0A000D7D4E
+:10D98000AFA000303C0208008C4200DC24420001C1
+:10D990003C010800AC2200DC0E00139F00000000D8
+:10D9A0000A000F318FBF007C8F4201043C0300202E
+:10D9B00092D3000D004310240002202B00042140CC
+:10D9C000AFA400308F4301043C02004000621824E1
+:10D9D000146000023485004000802821326200205B
+:10D9E000AFA500301440000234A6008000A0302112
+:10D9F00010C0000BAFA6003093C500088F67004C25
+:10DA00000200202100052B0034A5008130A5F08103
+:10DA10000E000C9B30C600FF0A000F2E0000000015
+:10DA20009362003E304200401040000F2402000488
+:10DA300056420007240200120200202100E02821A3
+:10DA40000E0013F702C030210A000F318FBF007C97
+:10DA500016420005000000000E000D2100002021EC
+:10DA60000A000F318FBF007C9743011A96C4000E45
+:10DA700093620035326500043075FFFF00442004D6
+:10DA8000AFA400548ED1000410A000158ED400085D
+:10DA90009362003E3042004010400007000000004A
+:10DAA0000E0013E0022020211040000D00000000B5
+:10DAB0000A000F2E000000008F6200440222102393
+:10DAC0000440016A000000008F6200480222102317
+:10DAD00004410166240400160A000E218FC20004CE
+:10DAE0008F6200480222102304400008000000005A
+:10DAF0003C0208008C423100244200013C01080035
+:10DB0000AC2231000A000F23000000008F620040A9
+:10DB100002221023184000128F8400143C020800D7
+:10DB20008C423100327300FC0000A8212442000125
+:10DB30003C010800AC2231008F6300409482011C3C
+:10DB4000022318233042FFFF0043102A50400010E8
+:10DB50002402000C8F6200400A000DF20222102302
+:10DB60009483011C9762003C0043102B1040000678
+:10DB7000000000009482011C00551023A482011CA7
+:10DB80000A000DF72402000CA480011C2402000CE2
+:10DB9000AFA200308F620040005120231880000D9A
+:10DBA00002A4102A1440012600000000149500066B
+:10DBB00002A410233A620001304200011440012007
+:10DBC0000000000002A41023022488210A000E098C
+:10DBD0003055FFFF00002021326200021040001A81
+:10DBE000326200109362003E30420040504000110B
+:10DBF0008FC200040E00130202002021240200182C
+:10DC0000A362003F936200052403FFFE020020216F
+:10DC1000004310240E00130BA362000524040039F6
+:10DC2000000028210E0013C9240600180A000F3036
+:10DC300024020001240400170040F809000000003D
+:10DC40000A000F302402000110400108000000000B
+:10DC50008F63004C8F620054028210231C4001032A
+:10DC600002831023044200010060A021AFA4001829
+:10DC7000AFB10010AFB50014934201208F65004092
+:10DC80009763003C304200FF034210210044102102
+:10DC90008FA400543063FFFF244240000083182B00
+:10DCA0008FA40030AFA20020AFA50028008320255C
+:10DCB000AFA40030AFA50024AFA0002CAFB4003457
+:10DCC0009362003E30420008504000118FC20000B5
+:10DCD00002C0202127A500380E000CB2AFA00038EA
+:10DCE0005440000B8FC200008FA200383042010068
+:10DCF000504000078FC200008FA3003C8F6200607D
+:10DD00000062102304430001AF6300608FC2000073
+:10DD10000040F80927A400108FA200303042000212
+:10DD200054400001327300FE9362003E30420040D6
+:10DD3000104000378FA200248F6200541682001A10
+:10DD40003262000124020014124200102A4200151F
+:10DD500010400006240200162402000C12420007A4
+:10DD6000326200010A000E7D000000001242000530
+:10DD7000326200010A000E7D000000000A000E78E9
+:10DD80002417000E0A000E78241700100A000E7CDB
+:10DD900024170012936200232403FFBD00431024C4
+:10DDA000A362002332620001104000198FA20024F8
+:10DDB0002402000C1242000E2A42000D1040000600
+:10DDC0002402000E2402000A124200078FA200243F
+:10DDD0000A000E9524420001124200088FA200247E
+:10DDE0000A000E95244200010A000E932417000831
+:10DDF0002402000E16E20002241700162417001059
+:10DE00008FA2002424420001AFA200248FA200248C
+:10DE10008FA300148F76004000431021AF620040B2
+:10DE20008F8200149442011C104000090000000081
+:10DE30008F6200488F6400409763003C00441023C9
+:10DE40003063FFFF0043102A104000088FA20054E7
+:10DE5000936400368F6300403402FFFC008210049C
+:10DE600000621821AF6300488FA200548FA60030D3
+:10DE70000282902130C200081040000E0000000015
+:10DE80008F6200581642000430C600FF9742011A04
+:10DE90005040000134C6001093C500088FA700341D
+:10DEA0000200202100052B0034A500800E000C9BF1
+:10DEB00030A5F0808F620040005610231840001BF0
+:10DEC0008FA200183C0208008C42319830420010AA
+:10DED0001040000D24020001976200681440000AFF
+:10DEE000240200018F8200149442011C1440000699
+:10DEF00024020001A76200689742007A244200646D
+:10DF00000A000EE9A7620012A76200120E001302B7
+:10DF1000020020219362007D2403000102002021E1
+:10DF2000344200010A000EE7AFA300501840000A77
+:10DF3000000000000E001302020020219362007D09
+:10DF40002403000102002021AFA30050344200044A
+:10DF50000E00130BA362007D9362003E304200402E
+:10DF60001440000C326200011040000A0000000062
+:10DF70008F6300408FC20004240400182463000152
+:10DF80000040F809AF6300408FA200300A000F3054
+:10DF9000304200048F620058105200100000000050
+:10DFA0008F620018022210231C4000082404000184
+:10DFB0008F62001816220009000000008F62001C0A
+:10DFC000028210230440000500000000AF720058D8
+:10DFD000AFA40050AF710018AF74001C12E0000B2A
+:10DFE0008FA200500E00130202002021A377003FF1
+:10DFF0000E00130B0200202102E030212404003720
+:10E000000E0013C9000028218FA200501040000309
+:10E01000000000000E000CA90200202112A0000543
+:10E02000000018218FA2003030420004504000113F
+:10E0300000601021240300010A000F30006010214D
+:10E040000E001302020020219362007D02002021B5
+:10E05000344200040E00130BA362007D0E000CA9D5
+:10E06000020020210A000F3024020001AF400044CA
+:10E07000240200018FBF007C8FBE00788FB7007430
+:10E080008FB600708FB5006C8FB400688FB30064DA
+:10E090008FB200608FB1005C8FB0005803E00008C1
+:10E0A00027BD00808F4201B80440FFFE2402080013
+:10E0B000AF4201B803E00008000000003C02000885
+:10E0C00003421021944200483084FFFF2484001250
+:10E0D0003045FFFF10A0001700A4102B10400016C1
+:10E0E00024020003934201202403001AA343018B5E
+:10E0F000304200FF2446FFFE8F82000000A6182B4E
+:10E100003863000100021382004310241040000510
+:10E110008F84000434820001A746019403E00008C4
+:10E12000AF8200042402FFFE0082102403E00008F6
+:10E13000AF8200042402000303E00008A342018B25
+:10E1400027BDFFE0AFB10014AFB00010AFBF0018A3
+:10E1500030B0FFFF30D1FFFF8F4201B80440FFFE17
+:10E1600000000000AF440180AF4400200E000F42C9
+:10E17000020020218F8300008F840004A750019AA1
+:10E18000A750018EA74301908F8300083082800042
+:10E19000AF4301A8A75101881040000E8F820004F0
+:10E1A00093420116304200FC24420004005A102120
+:10E1B0008C4240003042FFFF144000068F82000472
+:10E1C0003C02FFFF34427FFF00821024AF82000434
+:10E1D0008F8200042403BFFF00431024A74201A63E
+:10E1E0009743010C8F42010400031C003042FFFFE3
+:10E1F00000621825AF4301AC3C021000AF4201B8E9
+:10E200008FBF00188FB100148FB0001003E000081A
+:10E2100027BD00208F470070934201128F830000BA
+:10E2200027BDFFF0304200FF00022882306201006B
+:10E23000000030211040004324A40003306240005D
+:10E24000104000103062200000041080005A10219D
+:10E250008C43400024A4000400041080AFA30000FD
+:10E26000005A10218C424000AFA2000493420116D4
+:10E27000304200FC005A10218C4240000A000FC0BE
+:10E28000AFA200081040002F0000302100041080D1
+:10E29000005A10218C43400024A400040004108084
+:10E2A000AFA30000005A10218C424000AFA000082C
+:10E2B000AFA200048FA80008000030210000202138
+:10E2C000240A00083C0908002529010003A41021A4
+:10E2D000148A000300042A001100000A0000000054
+:10E2E00090420000248400012C83000C00A2102125
+:10E2F00000021080004910218C4200001460FFF3DE
+:10E3000000C230263C0408008C8431048F42007027
+:10E310002C83002010600009004738233C030800CC
+:10E32000246331080004108000431021248300017D
+:10E33000AC4700003C010800AC233104AF86000864
+:10E340002406000100C0102103E0000827BD0010D2
+:10E350003C0208008C42003827BDFFD0AFB5002436
+:10E36000AFB40020AFB10014AFBF0028AFB3001CA2
+:10E37000AFB20018AFB00010000088213C150800B3
+:10E3800026B50038144000022454FFFF0000A021ED
+:10E390009742010E8F8400003042FFFF308340001F
+:10E3A0001060000A245200043C0200200082102465
+:10E3B00050400007308280008F8200042403BFFF9A
+:10E3C000008318240A0010103442100030828000AC
+:10E3D0001040000A3C020020008210241040000778
+:10E3E0008F8200043C03FFFF34637FFF0083182407
+:10E3F00034428000AF820004AF8300000E000F980B
+:10E400000000000014400007000000009743011EB8
+:10E410009742011C3063FFFF0002140000621825C0
+:10E42000AF8300089742010C8F4340003045FFFF47
+:10E430003402FFFF14620003000000000A001028ED
+:10E44000241100208F42400030420100544000015E
+:10E45000241100108F8400003082100050400014FE
+:10E4600036310001308200201440000B3C021000C5
+:10E47000008210245040000E363100013C030E0093
+:10E480003C020DFF008318243442FFFF0043102B91
+:10E4900050400007363100013C0208008C42002C3D
+:10E4A000244200013C010800AC22002C363100055A
+:10E4B0003C0608008CC6003454C000238F85000041
+:10E4C0008F820004304240005440001F8F850000BE
+:10E4D0003C021F01008210243C0310005443001A28
+:10E4E0008F85000030A20200144000178F850000C5
+:10E4F0003250FFFF363100028F4201B80440FFFE68
+:10E5000000000000AF400180020020210E000F42F9
+:10E51000AF4000208F8300042402BFFFA750019A60
+:10E52000006218248F820000A750018EA751018835
+:10E53000A74301A6A74201903C021000AF4201B8D8
+:10E540000A0010F5000010213C02100000A2102467
+:10E550001040003A0000000010C0000F0000000052
+:10E5600030A201001040000C3C0302003C020F00EE
+:10E5700000A2102410430008000000008F82000851
+:10E58000005410240055102190420004244200043D
+:10E590000A00109F000221C00000000000051602C2
+:10E5A0003050000F3A0300022E4203EF38420001C0
+:10E5B0002C6300010062182414600073240200011F
+:10E5C0003C0308008C6300D02E06000C386200016A
+:10E5D0002C4200010046102414400015001021C0F8
+:10E5E0002602FFFC2C4200045440001100002021B0
+:10E5F000386200022C420001004610241040000343
+:10E60000000512420A00109F000020210010182B64
+:10E610000043102450400006001021C000002021BB
+:10E620003245FFFF0E000F633226FFFB001021C0B2
+:10E630003245FFFF0A0010F2362600028F424000EA
+:10E640003C0308008C630024304201001040004667
+:10E6500030620001322200043070000D14400002CC
+:10E660002413000424130002000512C238420001E2
+:10E670002E4303EF304200013863000100431025B0
+:10E68000104000033231FFFB2402FFFB0202802412
+:10E6900010C000183202000130A201001040001525
+:10E6A000320200013C020F0000A210243C030200D1
+:10E6B0001043000F8F8200082403FFFE0203802412
+:10E6C00000541024005510219042000402333025DC
+:10E6D0002442000412000002000221C03226FFFF83
+:10E6E0000E000F633245FFFF1200002700001021CB
+:10E6F000320200011040000D320200042402000129
+:10E7000012020002023330253226FFFF00002021D2
+:10E710000E000F633245FFFF2402FFFE0202802439
+:10E7200012000019000010213202000410400016EF
+:10E7300024020001240200041202000202333025E8
+:10E740003226FFFF3245FFFF0E000F632404010055
+:10E750002402FFFB020280241200000B00001021A3
+:10E760000A0010F5240200011040000700001021EB
+:10E770003245FFFF36260002000020210E000F6305
+:10E7800000000000000010218FBF00288FB500247A
+:10E790008FB400208FB3001C8FB200188FB100140B
+:10E7A0008FB0001003E0000827BD003027BDFFD068
+:10E7B000AFB000103C04600CAFBF002CAFB6002817
+:10E7C000AFB50024AFB40020AFB3001CAFB2001847
+:10E7D000AFB100148C8250002403FF7F3C1A8000EC
+:10E7E000004310243442380CAC8250002402000351
+:10E7F0003C106000AF4200088E0208083C1B8008F5
+:10E800003C010800AC2000203042FFF038420010EC
+:10E810002C4200010E001B85AF8200183C04FFFF54
+:10E820003C020400348308063442000CAE0219484E
+:10E83000AE03194C3C0560168E0219808CA30000B3
+:10E840003442020000641824AE0219803C02535383
+:10E850001462000334A47C008CA200040050202128
+:10E860008C82007C8C830078AF820010AF83000C18
+:10E870008F55000032A200031040FFFD32A20001BC
+:10E880001040013D32A200028F420128AF42002019
+:10E890008F4201048F430100AF8200000E000F3C45
+:10E8A000AF8300043C0208008C4200C01040000806
+:10E8B0008F8400003C0208008C4200C42442000106
+:10E8C0003C010800AC2200C40A00126900000000EC
+:10E8D0003C020010008210241440010C8F830004BD
+:10E8E0003C0208008C4200203C0308008C63003886
+:10E8F00000008821244200013C010800AC220020D5
+:10E900003C16080026D60038146000022474FFFF6D
+:10E910000000A0219742010E308340003042FFFFEB
+:10E920001060000A245200043C02002000821024DF
+:10E9300050400007308280008F8200042403BFFF14
+:10E94000008318240A0011703442100030828000C5
+:10E950001040000A3C0200200082102410400007F2
+:10E960008F8200043C03FFFF34637FFF0083182481
+:10E9700034428000AF820004AF8300000E000F9885
+:10E980000000000014400007000000009743011E33
+:10E990009742011C3063FFFF00021400006218253B
+:10E9A000AF8300089742010C8F4340003045FFFFC2
+:10E9B0003402FFFF14620003000000000A00118807
+:10E9C000241100208F4240003042010054400001D9
+:10E9D000241100108F840000308210005040001479
+:10E9E00036310001308200201440000B3C02100040
+:10E9F000008210245040000E363100013C030E000E
+:10EA00003C020DFF008318243442FFFF0043102B0B
+:10EA100050400007363100013C0208008C42002CB7
+:10EA2000244200013C010800AC22002C36310005D4
+:10EA30003C0608008CC6003454C000238F850000BB
+:10EA40008F820004304240005440001F8F85000038
+:10EA50003C021F01008210243C0310005443001AA2
+:10EA60008F85000030A20200144000178F8500003F
+:10EA70003250FFFF363100028F4201B80440FFFEE2
+:10EA800000000000AF400180020020210E000F4274
+:10EA9000AF4000208F8300042402BFFFA750019ADB
+:10EAA000006218248F820000A750018EA7510188B0
+:10EAB000A74301A6A74201903C021000AF4201B853
+:10EAC0000A001267000010213C02100000A210246E
+:10EAD0001040003A0000000010C0000F00000000CD
+:10EAE00030A201001040000C3C0302003C020F0069
+:10EAF00000A2102410430008000000008F820008CC
+:10EB000000541024005610219042000424420004B6
+:10EB10000A0011FF000221C00000000000051602DB
+:10EB20003050000F3A0300022E4203EF384200013A
+:10EB30002C63000100621824146000852402000187
+:10EB40003C0308008C6300D02E06000C38620001E4
+:10EB50002C4200010046102414400015001021C072
+:10EB60002602FFFC2C42000454400011000020212A
+:10EB7000386200022C42000100461024504000037D
+:10EB8000000512420A0011FF000020210010182B7E
+:10EB90000043102450400006001021C00000202136
+:10EBA0003245FFFF0E000F633226FFFB001021C02D
+:10EBB0003245FFFF0A001252362600028F42400003
+:10EBC0003C0308008C6300243042010010400046E2
+:10EBD00030620001322200043070000D1440000247
+:10EBE0002413000424130002000512C2384200015D
+:10EBF0002E4303EF3042000138630001004310252B
+:10EC0000104000033231FFFB2402FFFB020280248C
+:10EC100010C000183202000130A20100104000159F
+:10EC2000320200013C020F0000A210243C0302004B
+:10EC30001043000F8F8200082403FFFE020380248C
+:10EC40000054102400561021904200040233302555
+:10EC50002442000412000002000221C03226FFFFFD
+:10EC60000E000F633245FFFF120000390000102133
+:10EC7000320200011040000D3202000424020001A3
+:10EC800012020002023330253226FFFF000020214D
+:10EC90000E000F633245FFFF2402FFFE02028024B4
+:10ECA0001200002B00001021320200041040002846
+:10ECB0002402000124020004120200020233302563
+:10ECC0003226FFFF3245FFFF0E000F6324040100D0
+:10ECD0002402FFFB020280241200001D000010210C
+:10ECE0000A001267240200015040001900001021A0
+:10ECF0003245FFFF36260002000020210E000F6380
+:10ED0000000000000A001267000010212402BFFF6B
+:10ED1000006210241040000800000000240287FF59
+:10ED200000621024144000083C020060008210249D
+:10ED300010400005000000000E000D34000000002F
+:10ED40000A001267000000000E0012C70000000059
+:10ED5000104000063C0240008F4301243C0260202A
+:10ED6000AC430014000000003C024000AF420138F8
+:10ED70000000000032A200021040FEBD00000000B2
+:10ED80008F4201403C044000AF4200208F430148C5
+:10ED90003C02700000621824106400420000000071
+:10EDA0000083102B144000063C0260003C0220004F
+:10EDB000106200073C0240000A0012C3000000007D
+:10EDC0001062003C3C0240000A0012C30000000038
+:10EDD0008F4501408F4601448F42014800021402D2
+:10EDE000304300FF240200041462000A274401801B
+:10EDF0008F4201B80440FFFE2402001CAC850000D5
+:10EE0000A082000B3C021000AF4201B80A0012C3FE
+:10EE10003C0240002402000914620012000616029F
+:10EE2000000229C0AF4500208F4201B80440FFFE18
+:10EE30002402000124030003AF450180A343018B9A
+:10EE4000A740018EA740019AA7400190AF4001A8BA
+:10EE5000A7420188A74201A6AF4001AC3C021000C6
+:10EE6000AF4201B88F4201B80440FFFE000000002D
+:10EE7000AC8500008F42014800021402A482000801
+:10EE800024020002A082000B8F420148A4820010DD
+:10EE90003C021000AC860024AF4201B80A0012C345
+:10EEA0003C0240000E001310000000000A0012C3D4
+:10EEB0003C0240000E001BBA000000003C02400073
+:10EEC000AF420178000000000A00112F000000008E
+:10EED0008F4201003042003E144000112402000124
+:10EEE000AF4000488F420100304207C0104000058B
+:10EEF00000000000AF40004CAF40005003E00008AD
+:10EF000024020001AF400054AF4000408F42010096
+:10EF10003042380054400001AF4000442402000158
+:10EF200003E00008000000008F4201B80440FFFE2B
+:10EF300024020001AF440180AF400184A74501884D
+:10EF4000A342018A24020002A342018B9742014A94
+:10EF500014C00004A7420190AF4001A40A0012EFC0
+:10EF60003C0210008F420144AF4201A43C02100059
+:10EF7000AF4001A803E00008AF4201B88F4201B8DA
+:10EF80000440FFFE24020002AF440180AF4401842C
+:10EF9000A7450188A342018AA342018B9742014AF7
+:10EFA000A7420190AF4001A48F420144AF4201A8A3
+:10EFB0003C02100003E00008AF4201B83C029000A0
+:10EFC0003442000100822025AF4400208F420020FF
+:10EFD0000440FFFE0000000003E000080000000005
+:10EFE0003C028000344200010082202503E000083A
+:10EFF000AF44002027BDFFE8AFBF0014AFB0001042
+:10F000008F50014093430149934201489344014882
+:10F01000306300FF304200FF00021200006228252A
+:10F020002402001910620076308400802862001AE1
+:10F030001040001C24020020240200081062007707
+:10F04000286200091040000E2402000B2402000177
+:10F0500010620034286200025040000524020006BD
+:10F0600050600034020020210A00139A00000000C2
+:10F0700010620030020020210A00139A00000000F4
+:10F080001062003B2862000C504000022402000E77
+:10F090002402000910620056020020210A00139A7F
+:10F0A0000000000010620056286200211040000F8E
+:10F0B000240200382402001C106200582862001D3F
+:10F0C000104000062402001F2402001B1062004CA6
+:10F0D000000000000A00139A000000001062004ABD
+:10F0E000020020210A00139A00000000106200456F
+:10F0F0002862003910400007240200802462FFCB00
+:10F100002C42000210400045020020210A00139604
+:10F110000000302110620009000000000A00139A6C
+:10F12000000000001480003D020020210A0013901E
+:10F130008FBF00140A001396240600018F4201B805
+:10F140000440FFFE24020002A342018BA745018870
+:10F150009742014AA74201908F420144A74201927F
+:10F160003C021000AF4201B80A00139C8FBF00148C
+:10F170009742014A144000290000000093620005F4
+:10F180003042000414400025000000000E0013026D
+:10F190000200202193620005020020213442000475
+:10F1A0000E00130BA36200059362000530420004B9
+:10F1B00014400002000000000000000D93620000F7
+:10F1C00024030020304200FF14430014000000001C
+:10F1D0008F4201B80440FFFE24020005AF500180B9
+:10F1E000A342018B3C0210000A00139AAF4201B8FF
+:10F1F0008FBF00148FB000100A0012F227BD001854
+:10F200000000000D02002021000030218FBF0014FB
+:10F210008FB000100A0012DD27BD00180000000D9D
+:10F220008FBF00148FB0001003E0000827BD001846
+:10F2300027BDFFE8AFBF00100E000F3C000000002C
+:10F24000AF4001808FBF0010000020210A000FE7AF
+:10F2500027BD00183084FFFF30A5FFFF00001821F4
+:10F260001080000700000000308200011040000202
+:10F2700000042042006518210A0013AB0005284055
+:10F2800003E000080060102110C0000624C6FFFF44
+:10F290008CA2000024A50004AC8200000A0013B573
+:10F2A0002484000403E000080000000010A000080F
+:10F2B00024A3FFFFAC860000000000000000000057
+:10F2C0002402FFFF2463FFFF1462FFFA248400047A
+:10F2D00003E0000800000000308300FF30A500FFBD
+:10F2E00030C600FF274701808F4201B80440FFFE6F
+:10F2F000000000008F42012834634000ACE20000AF
+:10F3000024020001ACE00004A4E30008A0E2000A2B
+:10F3100024020002A0E2000B3C021000A4E5001051
+:10F32000ACE00024ACE00028A4E6001203E00008F2
+:10F33000AF4201B827BDFFE8AFBF00109362003FA6
+:10F3400024030012304200FF1043000D00803021E2
+:10F350008F620044008210230440000A8FBF001017
+:10F360008F620048240400390000282100C21023C5
+:10F3700004410004240600120E0013C9000000001E
+:10F380008FBF00102402000103E0000827BD001811
+:10F3900027BDFFC8AFB20030AFB1002CAFBF003403
+:10F3A000AFB0002890C5000D0080902130A400105F
+:10F3B0001080000B00C088218CC300088F620054AD
+:10F3C0001062000730A20005144000B524040001BB
+:10F3D0000E000D21000020210A0014BB0040202156
+:10F3E00030A200051040000930A30012108000ACCC
+:10F3F000240400018E2300088F620054146200A9C7
+:10F400008FBF00340A00142C240400382402001298
+:10F41000146200A3240400010220202127A500106B
+:10F420000E000CB2AFA000101040001102402021CD
+:10F430008E220008AF620084AF6000400E0013020D
+:10F44000000000009362007D024020213442002031
+:10F450000E00130BA362007D0E000CA902402021B8
+:10F46000240400382405008D0A0014B82406001274
+:10F470009362003E304200081040000F8FA200103F
+:10F4800030420100104000078FA300148F6200601B
+:10F490000062102304430008AF6300600A001441B7
+:10F4A00000000000AF6000609362003E2403FFF79D
+:10F4B00000431024A362003E9362003E30420008E5
+:10F4C000144000022406000300003021936200343F
+:10F4D000936300378F640084304200FF306300FF85
+:10F4E00000661821000318800043282100A4202B67
+:10F4F0001080000B000000009763003C8F620084C6
+:10F500003063FFFF004510230062182B14600004D5
+:10F51000000000008F6200840A00145D0045802313
+:10F520009762003C3050FFFF8FA300103062000450
+:10F5300010400004000628808FA2001C0A001465F9
+:10F540000202102B2E02021850400003240202185F
+:10F550000A00146E020510233063000410600003DB
+:10F56000004510238FA2001C00451023004080217D
+:10F570002C42008054400001241000800E00130231
+:10F580000240202124020001AF62000C9362003E81
+:10F59000001020403042007FA362003E8E22000413
+:10F5A00024420001AF620040A770003C8F6200500F
+:10F5B0009623000E00431021AF6200588F62005066
+:10F5C00000441021AF62005C8E220004AF6200187C
+:10F5D0008E220008AF62001C8FA20010304200088B
+:10F5E0005440000A93A20020A360003693620036C4
+:10F5F0002403FFDFA36200359362003E0043102422
+:10F60000A362003E0A0014988E220008A36200350F
+:10F610008E220008AF62004C8F6200248F6300408E
+:10F6200000431021AF6200489362000024030050A1
+:10F63000304200FF144300122403FF803C02080004
+:10F640008C4231A00242102100431024AF42002816
+:10F650003C0208008C4231A08E2400083C03000CC0
+:10F66000024210213042007F03421021004310214A
+:10F67000AC4400D88E230008AF820014AC4300DCF9
+:10F680000E00130B02402021240400380000282122
+:10F690002406000A0E0013C9000000002404000123
+:10F6A0008FBF00348FB200308FB1002C8FB0002894
+:10F6B0000080102103E0000827BD003827BDFFF8B7
+:10F6C00027420180AFA20000308A00FF8F4201B8BC
+:10F6D0000440FFFE000000008F4601283C020800A5
+:10F6E0008C4231A02403FF80AF86004800C2102165
+:10F6F00000431024AF4200243C0208008C4231A099
+:10F700008FA900008FA8000000C210213042007FA6
+:10F71000034218213C02000A00621821946400D4BC
+:10F720008FA700008FA5000024020002AF83001401
+:10F73000A0A2000B8FA30000354260003084FFFFC1
+:10F74000A4E200083C021000AD260000AD04000455
+:10F75000AC60002427BD0008AF4201B803E00008F8
+:10F76000240200018F88003C938200288F830014BC
+:10F770003C07080024E7777800481023304200FF58
+:10F78000304900FC246500888F860040304A000321
+:10F790001120000900002021248200048CA3000015
+:10F7A000304400FF0089102AACE3000024A50004C7
+:10F7B0001440FFF924E70004114000090000202153
+:10F7C0002482000190A30000304400FF008A102B27
+:10F7D000A0E3000024A500011440FFF924E7000184
+:10F7E00030C20003144000048F85003C3102000346
+:10F7F0001040000D0000000010A0000900002021B2
+:10F800002482000190C30000304400FF0085102BCB
+:10F81000A0E3000024C600011440FFF924E7000122
+:10F8200003E00008000000001100FFFD000020219F
+:10F83000248200048CC30000304400FF0088102B99
+:10F84000ACE3000024C600041440FFF924E70004E0
+:10F8500003E00008000000008F83003C9382002832
+:10F8600030C600FF30A500FF00431023304300FFE7
+:10F870008F820014008038210043102114C0000240
+:10F88000244800880083382130E20003144000053A
+:10F8900030A2000314400003306200031040000D4A
+:10F8A0000000000010A000090000202124820001B7
+:10F8B00090E30000304400FF0085102BA1030000FE
+:10F8C00024E700011440FFF92508000103E00008C7
+:10F8D0000000000010A0FFFD000020212482000491
+:10F8E0008CE30000304400FF0085102BAD030000C6
+:10F8F00024E700041440FFF92508000403E0000891
+:10F90000000000000080482130AAFFFF30C600FF41
+:10F9100030E7FFFF274801808F4201B80440FFFE17
+:10F920008F820048AD0200008F420124AD02000426
+:10F930008D220020A5070008A102000A240200165B
+:10F94000A102000B934301208D2200088D240004A6
+:10F95000306300FF004310219783003A00441021D8
+:10F960008D250024004310233C0308008C6331A044
+:10F970008F840014A502000C246300E82402FFFF1A
+:10F98000A50A000EA5030010A5060012AD0500187B
+:10F99000AD020024948201142403FFF73042FFFFDC
+:10F9A000AD0200288C820118AD02002C3C02100030
+:10F9B000AD000030AF4201B88D220020004310247A
+:10F9C00003E00008AD2200208F82001430E7FFFF23
+:10F9D00000804821904200D330A5FFFF30C600FFD1
+:10F9E0000002110030420F0000E238252748018054
+:10F9F0008F4201B80440FFFE8F820048AD02000034
+:10FA00008F420124AD0200048D220020A5070008CA
+:10FA1000A102000A24020017A102000B9343012057
+:10FA20008D2200088D240004306300FF0043102164
+:10FA30009783003A004410218F8400140043102360
+:10FA40003C0308008C6331A0A502000CA505000E44
+:10FA5000246300E8A5030010A5060012AD00001401
+:10FA60008D220024AD0200188C82005CAD02001CC7
+:10FA70008C820058AD0200202402FFFFAD0200245A
+:10FA8000948200E63042FFFFAD02002894820060BD
+:10FA9000948300BE30427FFF3063FFFF00021200FC
+:10FAA00000431021AD02002C3C021000AD000030DC
+:10FAB000AF4201B8948200BE2403FFF700A21021D8
+:10FAC000A48200BE8D2200200043102403E0000821
+:10FAD000AD220020274301808F4201B80440FFFE81
+:10FAE0008F8200249442001C3042FFFF000211C0AC
+:10FAF000AC62000024020019A062000B3C0210005E
+:10FB0000AC60003003E00008AF4201B88F87002CE2
+:10FB100030C300FF8F4201B80440FFFE8F820048CF
+:10FB200034636000ACA2000093820044A0A20005F0
+:10FB30008CE20010A4A20006A4A300088C8200207E
+:10FB40002403FFF7A0A2000A24020002A0A2000BD7
+:10FB50008CE20000ACA200108CE20004ACA2001405
+:10FB60008CE2001CACA200248CE20020ACA2002895
+:10FB70008CE2002CACA2002C8C820024ACA20018D9
+:10FB80003C021000AF4201B88C82002000431024D8
+:10FB900003E00008AC8200208F86001427BDFFE838
+:10FBA000AFBF0014AFB0001090C20063304200201D
+:10FBB0001040000830A500FF8CC2007C2403FFDF4A
+:10FBC00024420001ACC2007C90C2006300431024B8
+:10FBD000A0C2006310A000238F830014275001806F
+:10FBE000020028210E0015D6240600828F82001400
+:10FBF000904200633042004050400019A38000440E
+:10FC00008F83002C8F4201B80440FFFE8F82004892
+:10FC1000AE02000024026082A60200082402000254
+:10FC2000A202000B8C620008AE0200108C62000C75
+:10FC3000AE0200148C620014AE0200188C62001830
+:10FC4000AE0200248C620024AE0200288C620028E0
+:10FC5000AE02002C3C021000AF4201B8A380004469
+:10FC60008F8300148FBF00148FB000109062006368
+:10FC700027BD00183042007FA06200639782003ADF
+:10FC80008F86003C8F850014938300280046102344
+:10FC9000A782003AA4A000E490A400638F820040F1
+:10FCA000AF83003C2403FFBF0046102100832024C3
+:10FCB000AF820040A0A400638F820014A04000BD6A
+:10FCC0008F82001403E00008A44000BE8F8A001455
+:10FCD00027BDFFE0AFB10014AFB000108F88003C2B
+:10FCE000AFBF00189389001C954200E430D100FF9B
+:10FCF0000109182B0080802130AC00FF3047FFFF46
+:10FD00000000582114600003310600FF012030215B
+:10FD1000010958239783003A0068102B1440003CD7
+:10FD20000000000014680007240200018E02002079
+:10FD30002403FFFB34E7800000431024AE020020C0
+:10FD40002402000134E70880158200053165FFFFB9
+:10FD50000E001554020020210A00169102002021F5
+:10FD60000E001585020020218F8400482743018062
+:10FD70008F4201B80440FFFE24020018AC6400006A
+:10FD8000A062000B8F840014948200E6A46200102D
+:10FD90003C021000AC600030AF4201B894820060B9
+:10FDA00024420001A4820060948200603C030800A9
+:10FDB0008C63318830427FFF5443000F02002021C2
+:10FDC000948200602403800000431024A482006019
+:10FDD0009082006090830060304200FF000211C2F8
+:10FDE00000021027000211C03063007F0062182556
+:10FDF000A083006002002021022028218FBF00186C
+:10FE00008FB100148FB000100A0015F927BD002033
+:10FE1000914200632403FF8000431025A142006348
+:10FE20009782003A3048FFFF110000209383001CA6
+:10FE30008F840014004B1023304600FF948300E4AD
+:10FE40002402EFFF0168282B00621824A48300E439
+:10FE500014A000038E020020010058210000302170
+:10FE60002403FFFB34E7800000431024AE0200208F
+:10FE700024020001158200053165FFFF0E001554B4
+:10FE8000020020210A0016B99783003A0E0015855A
+:10FE9000020020219783003A8F82003CA780003A1D
+:10FEA00000431023AF82003C9383001C8F82001418
+:10FEB0008FBF00188FB100148FB0001027BD002035
+:10FEC00003E00008A04300BD938200442403000126
+:10FED00027BDFFE8004330042C420020AFB00010E3
+:10FEE000AFBF00142410FFFE10400005274501801D
+:10FEF0003C0208008C4231900A0016D600461024BD
+:10FF00003C0208008C423194004610241440000743
+:10FF1000240600848F8300142410FFFF9062006287
+:10FF20003042000F34420040A06200620E0015D63D
+:10FF300000000000020010218FBF00148FB00010DD
+:10FF400003E0000827BD00188F83002427BDFFE0D1
+:10FF5000AFB20018AFB10014AFB00010AFBF001CBB
+:10FF60009062000D00A0902130D100FF3042007F50
+:10FF7000A062000D8F8500148E4300180080802140
+:10FF80008CA2007C146200052402000E90A2006383
+:10FF9000344200200A0016FFA0A200630E0016C51E
+:10FFA000A38200442403FFFF104300472404FFFF03
+:10FFB00052200045000020218E4300003C0200102A
+:10FFC00000621024504000043C020008020020217E
+:10FFD0000A00170E24020015006210245040000988
+:10FFE0008E45000002002021240200140E0016C5D8
+:10FFF000A38200442403FFFF104300332404FFFFC7
 :020000040001F9
-:10000000104000163C0200048F8600248CC20014AD
-:100010008CC300108CC40014004310230044102B28
-:1000200050400005020020218E43002C8CC200109D
-:1000300010620003020020210A00173F2402001270
-:100040003C02000400A210245040001C00002021AB
-:10005000020020210A00173F2402001300A21024EE
-:10006000104000068F8300248C6200105040001363
-:10007000000020210A001739020020218C620010A4
-:10008000504000048E42002C020020210A00173F3D
-:10009000240200115040000900002021020020210C
-:1000A000240200170E0016C5A38200442403FFFF9C
-:1000B000104300022404FFFF000020218FBF001C1A
-:1000C0008FB200188FB100148FB000100080102183
-:1000D00003E0000827BD00208F83001427BDFFD850
-:1000E000AFB40020AFB3001CAFB20018AFB1001422
-:1000F000AFB00010AFBF0024906200638F91002C5E
-:100100002412FFFF3442004092250000A0620063E9
-:100110008E2200100080982130B0003F105200065F
-:100120000360A0212402000D0E0016C5A382004426
-:10013000105200542404FFFF8F8300148E220018F5
-:100140008C63007C10430007026020212402000E13
-:100150000E0016C5A38200442403FFFF104300498C
-:100160002404FFFF24040020120400048F830014E1
-:100170009062006334420020A06200638F850034E7
-:1001800010A0002000000000560400048F8200141C
-:10019000026020210A0017902402000A9683000AB8
-:1001A000944200603042FFFF144300048F8200201D
-:1001B0002404FFFD0A0017B7AF82003C3C02080090
-:1001C0008C42318C0045102B144000060260202127
-:1001D000000028210E001646240600010A0017B769
-:1001E000000020212402002D0E0016C5A382004429
-:1001F0002403FFFF104300232404FFFF0A0017B766
-:1002000000002021160400058F8400148E230014A2
-:100210002402FFFF506200180260202194820060D7
-:1002200024420001A4820060948200603C03080024
-:100230008C63318830427FFF5443000F02602021DD
-:10024000948200602403800000431024A482006094
-:100250009082006090830060304200FF000211C273
-:1002600000021027000211C03063007F00621825D1
-:10027000A0830060026020210E0015F92405000112
-:10028000000020218FBF00248FB400208FB3001CFA
-:100290008FB200188FB100148FB0001000801021B1
-:1002A00003E0000827BD00288F83001427BDFFE866
-:1002B000AFB00010AFBF0014906200638F87002CB6
-:1002C00000808021344200408CE60010A062006370
-:1002D0003C0308008C6331B030C23FFF0043102B59
-:1002E0001040004E8F8500302402FF8090A3000D47
-:1002F00000431024304200FF5040004902002021FA
-:100300000006138230480003240200025502004414
-:100310000200202194A2001C8F85001424030023D6
-:10032000A4A201148CE60000000616023042003F31
-:10033000104300103C0300838CE300188CA2007C67
-:10034000106200062402000E0E0016C5A3820044AF
-:100350002403FFFF104300382404FFFF8F830014A1
-:100360009062006334420020A06200630A0017FC20
-:100370008F83002400C31024144300078F830024BC
-:1003800090A200623042000F34420020A0A200621E
-:10039000A38800388F8300249062000D3042007FD4
-:1003A000A062000D8F83003410600018020020212D
-:1003B0008F8400308C8200100043102B1040000905
-:1003C00024020018020020210E0016C5A38200445A
-:1003D0002403FFFF104300182404FFFF0A00182421
-:1003E000000020218C820010240500010200202141
-:1003F000004310238F830024240600010E001646BC
-:10040000AC6200100A001824000020210E0015F92B
-:10041000240500010A0018240000202102002021E8
-:100420002402000D8FBF00148FB0001027BD0018EC
-:100430000A0016C5A38200448FBF00148FB00010BD
-:100440000080102103E0000827BD001827BDFFC869
-:10045000AFB20020AFBF0034AFB60030AFB5002C54
-:10046000AFB40028AFB30024AFB1001CAFB0001888
-:100470008F4601283C0308008C6331A02402FF80D2
-:10048000AF86004800C318213065007F034528214E
-:10049000006218243C02000AAF43002400A2282175
-:1004A00090A2006200809021AF850014304200FFCE
-:1004B00000021102A382003890A200BC3042000268
-:1004C0001440000224030034240300308F820014FF
-:1004D000A3830028938300388C4200C0A38000448B
-:1004E000AF82003C24020004106203148F84003C9D
-:1004F0008E440004508003118F84003C8E42001013
-:100500003083FFFFA784003A106002F7AF820040FB
-:100510008F8400142403FF80908200630062102403
-:10052000304200FF144002C79785003A9383003899
-:100530002402000230B6FFFF14620005000088218B
-:10054000938200282403FFFD0A001B11AF82003CA8
-:100550008F82003C02C2102B144002998F8400400D
-:100560000E0014EC00000000938300283C040800F7
-:1005700024847778240200341462002EAF84002C87
-:100580003C0A08008D4A77A82402FFFFAFA20010A2
-:10059000008038212405002F3C09080025297378A4
-:1005A000240800FF2406FFFF90E2000024A3FFFFC1
-:1005B0000006220200C21026304200FF0002108016
-:1005C000004910218C420000306500FF24E7000143
-:1005D00014A8FFF50082302600061027AFA20014F1
-:1005E000AFA200100000282127A7001027A60014A2
-:1005F00000C510239044000324A2000100A7182185
-:10060000304500FF2CA200041440FFF9A064000054
-:100610008FA2001011420007240200050240202191
-:100620000E0016C5A38200442403FFFF104300649C
-:100630002404FFFF3C0208009042777C1040000930
-:100640008F820014024020212402000C0E0016C5E7
-:10065000A38200442403FFFF104300592404FFFF3A
-:100660008F820014A380001C3C0308008C63777CFD
-:100670008C4400803C0200FF3442FFFF00621824DB
-:100680000083202B10800008AF830034024020211B
-:10069000240200190E0016C5A38200442403FFFFA4
-:1006A000104300472404FFFF8F87003C9782003AE5
-:1006B0008F850034AF8700200047202310A0003B27
-:1006C000A784003A8F86001430A200030002102392
-:1006D00090C300BC3050000300B0282100031882F2
-:1006E000307300010013108000A228213C03080091
-:1006F0008C6331A08F8200483084FFFF0085202B5F
-:100700000043102110800011244200888F84002CA7
-:100710001082000E3C033F013C0208008C427778B7
-:10072000004310243C0325001443000630E500FF7D
-:100730008C820000ACC200888C8200100A0018E98C
-:10074000ACC200980E001529000030219382001CD5
-:100750008F8500148F830040020238218F82003C75
-:10076000A387001C94A400E4006218218F82003447
-:1007700034841000AF83004000503021A4A400E472
-:100780001260000EAF86003C24E20004A382001C2D
-:1007900094A200E424C30004AF83003C3442200050
-:1007A000A4A200E40A001906000020218F82004064
-:1007B000AF80003C00471021AF82004000002021A4
-:1007C0002414FFFF109402092403FFFF3C080800D3
-:1007D0008D0877883C0208008C4231B03C03080049
-:1007E0009063777831043FFF0082102B1040001B8C
-:1007F0003067003F3C0208008C4231A88F830048DC
-:100800000004218000621821006418213062007FFA
-:10081000034228213C02000C00A228213C02008057
-:10082000344200013066007800C230252402FF8087
-:1008300000621024AF42002830640007AF42080471
-:100840008F8200140344202124840940AF460814F9
-:10085000AF850024AF840030AC4301189383003887
-:1008600024020003146201C72402000124020026AE
-:1008700010E201C928E200271040001324020032D0
-:100880002402002210E201C428E2002310400008E4
-:10089000240200242402002010E201B024020021DE
-:1008A00010E2013F024020210A001AF32402000B4B
-:1008B00010E201B92402002510E2001002402021BC
-:1008C0000A001AF32402000B10E201A628E200330A
-:1008D000104000062402003F2402003110E2009282
-:1008E000024020210A001AF32402000B10E2019DAD
-:1008F000024020210A001AF32402000B8F90002CE2
-:100900003C0308008C6331B08F8500308E040010EA
-:100910000000A8218CB3001430823FFF0043102B4D
-:100920008CB10020504001870240202190A3000D8F
-:100930002402FF8000431024304200FF5040018118
-:100940000240202100041382304200031440017D44
-:100950000240202194A3001C8F8200148E040028E2
-:10096000A44301148CA20010026218231064000337
-:10097000024020210A00197C2402001F8F820034CB
-:10098000006210210262102B104000088F830024A7
-:1009900002402021240200180E0016C5A382004444
-:1009A0001054016C2404FFFF8F8300248F840034D3
-:1009B0008C6200100224882100441023AC620010D5
-:1009C0008F820014AC7100208C4200680051102B03
-:1009D000104000098F830030024020212402001DB6
-:1009E0000E0016C5A38200442403FFFF10430159E3
-:1009F0002404FFFF8F8300308E0200248C630024C8
-:100A000010430007024020212402001C0E0016C5DE
-:100A1000A38200442403FFFF1043014E2404FFFF80
-:100A20008F8400248C82002424420001AC820024A4
-:100A3000123300048F8200148C4200685622000E8C
-:100A40008E0200008E0200003C0300800043102450
-:100A50001440000D2402001A024020210E0016C589
-:100A6000A38200442403FFFF1043013A2404FFFF44
-:100A70000A0019BA8E0200143C03008000431024BF
-:100A8000504000038E020014AC8000208E0200143F
-:100A90002411FFFF105100062402001B02402021F8
-:100AA0000E0016C5A38200441051012A2404FFFF42
-:100AB0008E0300003C02000100621024104000126E
-:100AC0003C020080006210241440000802402021F3
-:100AD0002402001A0E0016C5A38200442403FFFF5F
-:100AE0001043011C2404FFFF0240202102002821A2
-:100AF0000E0016E5240600012403FFFF1043011534
-:100B00002404FFFF241500018F83002402A030215C
-:100B10000240202194620036240500012442000195
-:100B20000A001AD7A46200368F90002C3C030800FC
-:100B30008C6331B08E13001032623FFF0043102BE4
-:100B4000104000898F8400302402FF809083000DC4
-:100B500000431024304200FF104000842402000DA6
-:100B60000013138230420003240300011443007F6A
-:100B70002402000D9082000D304200085440000411
-:100B80008F820034024020210A001A082402002427
-:100B9000504000048E03000C024020210A001A0875
-:100BA000240200278C82002054620006024020218B
-:100BB0008E0300088C820024506200098E0200140B
-:100BC00002402021240200200E0016C5A38200440A
-:100BD000105400712403FFFF0A001A3D8F84002483
-:100BE0002411FFFF145100048F86001402402021BD
-:100BF0000A001A38240200258E0300188CC2007CDB
-:100C0000106200032402000E0A001A38024020215C
-:100C10008E0300248C82002810620003240200212D
-:100C20000A001A38024020218E0500288C82002CF0
-:100C300010A200032402001F0A001A3802402021DB
-:100C40008E03002C14600003240200230A001A38CB
-:100C5000024020218CC200680043102B104000038A
-:100C6000240200260A001A38024020218C82001437
-:100C7000006518210043102B104000088F840024C9
-:100C800002402021240200220E0016C5A382004447
-:100C9000105100412403FFFF8F8400242403FFF739
-:100CA0009082000D00431024A082000D8F86001456
-:100CB0003C0308008C6331AC8F82004894C400E090
-:100CC0008F8500240043102130847FFF00042040E2
-:100CD000004410213043007F034320213C03000ED9
-:100CE000008320212403FF8000431024AF42002C06
-:100CF000A49300008CA2002824420001ACA200288A
-:100D00008CA2002C8E03002C00431021ACA2002CDE
-:100D10008E02002CACA200308E020014ACA2003473
-:100D200094A2003A24420001A4A2003A94C600E032
-:100D30003C0208008C4231B024C4000130837FFFA4
-:100D40001462000F008030212402800000823024D1
-:100D500030C2FFFF000213C2304200FF0002102722
-:100D60000A001A76000233C02402000D024020213E
-:100D70000E0016C5A38200440A001A7C0040182108
-:100D80008F82001402402021240500010E0015F975
-:100D9000A44600E0000018210A001B0E0060882114
-:100DA0008F90002C3C0308008C6331B08E0500103E
-:100DB00030A23FFF0043102B104000612402FF804F
-:100DC0008F8400309083000D00431024304200FFD8
-:100DD0005040005C024020218F8200341040000B04
-:100DE000000513828F8200149763000A944200600A
-:100DF0003042FFFF14430005000513828F8200205C
-:100E00002404FFFD0A001AEBAF82003C30420003CD
-:100E10001440000E00000000920200021040000585
-:100E20008E03002450600015920300030A001AA7E5
-:100E3000024020218C8200245062001092030003A3
-:100E4000024020210A001AAF2402000F9082000DF8
-:100E50003042000854400009920300030240202160
-:100E6000240200100E0016C5A38200442403FFFFD5
-:100E7000104300382404FFFF920300032402000201
-:100E80005462000C920200038F8200345440000927
-:100E900092020003024020212402002C0E0016C5FD
-:100EA000A38200442403FFFF1043002A2404FFFF11
-:100EB000920200030200282102402021384600103F
-:100EC0002CC600012C4200010E0016E5004630251C
-:100ED0002410FFFF1050001F2404FFFF8F830034F5
-:100EE00010600013024020213C0208008C42318C2B
-:100EF0000043102B144000070000000000002821D0
-:100F0000240600010E001646000000000A001AEB3D
-:100F1000000020212402002D0E0016C5A3820044EB
-:100F20001050000C2404FFFF0A001AEB00002021DF
-:100F30000E0015F9240500010A001AEB000020211B
-:100F4000024020212402000D0E0016C5A382004499
-:100F5000004020210A001B0E008088211514000E7D
-:100F6000000000000E00174C024020210A001B0E5A
-:100F7000004088210E0016C5A38200440A001B0E03
-:100F80000040882114620017022018212402002347
-:100F900014E200052402000B0E0017C002402021BD
-:100FA0000A001B0E0040882102402021A382004439
-:100FB0000E0016C52411FFFF0A001B0F0220182186
-:100FC00030A500FF0E001529240600019783003A82
-:100FD0008F82003CA780003A00431023AF82003C80
-:100FE000022018211220003E9782003A2402FFFDC1
-:100FF0005462003E8E4300208E4200048F83001412
-:1010000000561023AE420004906200633042007F1D
-:10101000A06200638E4200208F840014A780003AF3
-:1010200034420002AE420020A48000E490820063BB
-:101030002403FFBF00431024A08200630A001B5159
-:101040008E4300209082006300621024304200FF33
-:10105000104000239782003A90820088908300BD60
-:10106000248500883042003F2444FFE02C82002089
-:10107000A383001C10400019AF85002C240200013E
-:1010800000821804306200191440000C3C028000F9
-:1010900034420002006210241440000B3062002031
-:1010A0001040000F9782003A90A6000102402021D4
-:1010B000240500010A001B4B30C60001024020211C
-:1010C0000A001B4A240500010240202100002821BB
-:1010D000240600010E001646000000009782003A28
-:1010E0001440FD0C8F8400148E43002030620004F5
-:1010F000104000128F84003C2402FFFB0062102489
-:10110000AE420020274301808F4201B80440FFFE19
-:101110008F820048AC6200008F420124AC62000460
-:1011200024026083A462000824020002A062000B73
-:101130003C021000AF4201B88F84003C8F83001442
-:101140008FBF00348FB600308FB5002C8FB40028CD
-:101150008FB300248FB200208FB1001C8FB0001815
-:101160002402000127BD003803E00008AC6400C081
-:1011700030A500FF2403000124A900010069102B01
-:101180001040000C00004021240A000100A310239D
-:10119000004A380424630001308200010069302BCA
-:1011A00010400002000420420107402554C0FFF80F
-:1011B00000A3102303E00008010010213C020800F6
-:1011C000244260A43C010800AC22736C3C0208007D
-:1011D000244253083C010800AC227370240200062C
-:1011E00027BDFFE03C010800A02273743C021EDC16
-:1011F000AFB20018AFB10014AFBF001CAFB0001009
-:1012000034526F4100008821240500080E001B7233
-:1012100002202021001180803C07080024E7737819
-:101220000002160002071821AC620000000028210D
-:1012300024A200013045FFFF8C6200002CA60008AC
-:1012400004410002000220400092202614C0FFF852
-:10125000AC640000020780218E0400000E001B72A7
-:1012600024050020262300013071FFFF2E230100FA
-:101270001460FFE5AE0200008FBF001C8FB20018A3
-:101280008FB100148FB0001003E0000827BD0020CC
-:1012900027BDFFD8AFB3001CAFB20018AFBF00200E
-:1012A000AFB10014AFB000108F5101408F4801481A
-:1012B00000089402324300FF311300FF8F4201B84F
-:1012C0000440FFFE27500180AE1100008F42014410
-:1012D000AE02000424020002A6120008A202000BC3
-:1012E00024020014AE1300241062002528620015A9
-:1012F0001040000824020015240200101062003083
-:1013000024020012106200098FBF00200A001CADE9
-:101310008FB3001C1062007024020022106200379C
-:101320008FBF00200A001CAD8FB3001C3C020800D8
-:101330008C4231A02403FF8002221021004310249C
-:10134000AF4200243C0208008C4231A0022210214E
-:101350003042007F034218213C02000A006218213B
-:10136000166000BCAF830014906200623042000F30
-:1013700034420030A06200620A001CAC8FBF002023
-:101380003C0460008C832C083C02F0033442FFFFD5
-:1013900000621824AC832C083C0208008C4231A067
-:1013A0008C832C08244200740002108200021480F6
-:1013B00000621825AC832C080A001CAC8FBF0020EB
-:1013C0003C0208008C4231A02403FF80022210213D
-:1013D00000431024AF4200243C0208008C4231A09C
-:1013E0003C03000A022210213042007F03421021F8
-:1013F000004310210A001CABAF8200143C0208001D
-:101400008C4231A02405FF800222102100451024C7
-:10141000AF4200243C0208008C4231A0022210217D
-:101420003042007F034218213C02000A006218216A
-:101430009062006300A21024304200FF104000853B
-:10144000AF83001424620088944300123C02080019
-:101450008C4231A830633FFF000319800222102123
-:10146000004310213043007F034320210045102416
-:101470003C03000C00832021AF4200289082000D25
-:1014800000A21024304200FF10400072AF840024FC
-:101490009082000D304200101440006F8FBF00207A
-:1014A0000E0015C8000000008F4201B80440FFFE86
-:1014B00000000000AE1100008F420144AE020004A3
-:1014C00024020002A6120008A202000BAE130024A0
-:1014D0000A001CAC8FBF00202406FF8002261024C7
-:1014E000AF4200203C0208008C4231A031043FFF93
-:1014F000000421800222102100461024AF42002463
-:101500003C0308008C6331A83C0208008C4231A0E7
-:101510003227007F022318210222102100641821A3
-:101520003042007F3064007F034228213C02000AE1
-:101530000066182400A22821034420213C02000C4C
-:1015400000822021AF4300283C02000803471821F5
-:1015500000629021AF850014AF8400240E0015C8EE
-:10156000010080218F4201B80440FFFE8F820024D9
-:101570008F840014274501809042000DACB100001B
-:10158000A4B0000600021600000216030002102795
-:10159000000237C214C00016248200889442001250
-:1015A00032033FFF30423FFF1443001224026082A7
-:1015B000908300632402FF8000431024304200FF28
-:1015C0005040000C24026082908200623042000F82
-:1015D00034420040A082006224026084A4A2000879
-:1015E0002402000DA0A200050A001C963C02270060
-:1015F00024026082A4A20008A0A000053C022700EB
-:1016000000061C000062182524020002A0A2000BA4
-:10161000ACA30010ACA00014ACA00024ACA0002827
-:10162000ACA0002C8E42004C8F840024ACA2001889
-:101630009083000D2402FF8000431024304200FFFD
-:10164000104000058FBF00209082000D3042007FC7
-:10165000A082000D8FBF00208FB3001C8FB2001836
-:101660008FB100148FB000103C02100027BD00287D
-:0816700003E00008AF4201B8DD
-:08167800080034300800343092
-:10168000080033A8080033E0080034140800343898
-:0C16900008003438080034380800331813
-:04169C000A0001241B
-:1016A00000000000000000000000000D74706136B2
-:1016B0002E302E313500000006000F010000000022
-:1016C000000000000000000000000000000000001A
+:100000008E4500003C02000200A2102410400016A1
+:100010003C0200048F8600248CC200148CC30010A4
+:100020008CC40014004310230044102B50400005E2
+:10003000020020218E43002C8CC2001010620003AD
+:10004000020020210A00173F240200123C02000493
+:1000500000A210245040001C00002021020020219A
+:100060000A00173F2402001300A2102410400006CB
+:100070008F8300248C620010504000130000202168
+:100080000A001739020020218C6200105040000441
+:100090008E42002C020020210A00173F240200118A
+:1000A00050400009000020210200202124020017F6
+:1000B0000E0016C5A38200442403FFFF1043000274
+:1000C0002404FFFF000020218FBF001C8FB2001806
+:1000D0008FB100148FB000100080102103E00008E1
+:1000E00027BD00208F83001427BDFFD8AFB40020A8
+:1000F000AFB3001CAFB20018AFB10014AFB0001026
+:10010000AFBF0024906200638F91002C2412FFFF88
+:100110003442004092250000A06200638E2200104D
+:100120000080982130B0003F105200060360A021EB
+:100130002402000D0E0016C5A38200441052005484
+:100140002404FFFF8F8300148E2200188C63007C30
+:1001500010430007026020212402000E0E0016C585
+:10016000A38200442403FFFF104300492404FFFF3F
+:1001700024040020120400048F83001490620063A2
+:1001800034420020A06200638F85003410A000205C
+:1001900000000000560400048F8200140260202139
+:1001A0000A0017902402000A9683000A9442006015
+:1001B0003042FFFF144300048F8200202404FFFD1F
+:1001C0000A0017B7AF82003C3C0208008C42318C19
+:1001D0000045102B14400006026020210000282159
+:1001E0000E001646240600010A0017B70000202161
+:1001F0002402002D0E0016C5A38200442403FFFF35
+:10020000104300232404FFFF0A0017B70000202139
+:10021000160400058F8400148E2300142402FFFFAF
+:100220005062001802602021948200602442000184
+:10023000A4820060948200603C0308008C633188D3
+:1002400030427FFF5443000F0260202194820060FF
+:100250002403800000431024A48200609082006088
+:1002600090830060304200FF000211C2000210279C
+:10027000000211C03063007F00621825A083006077
+:10028000026020210E0015F9240500010000202144
+:100290008FBF00248FB400208FB3001C8FB20018D2
+:1002A0008FB100148FB000100080102103E000080F
+:1002B00027BD00288F83001427BDFFE8AFB00010D2
+:1002C000AFBF0014906200638F87002C00808021F4
+:1002D000344200408CE60010A06200633C0308003A
+:1002E0008C6331B030C23FFF0043102B1040004EF2
+:1002F0008F8500302402FF8090A3000D004310245E
+:10030000304200FF504000490200202100061382C5
+:10031000304800032402000255020044020020215C
+:1003200094A2001C8F85001424030023A4A20114AE
+:100330008CE60000000616023042003F1043001019
+:100340003C0300838CE300188CA2007C1062000642
+:100350002402000E0E0016C5A38200442403FFFFF2
+:10036000104300382404FFFF8F8300149062006361
+:1003700034420020A06200630A0017FC8F8300242F
+:1003800000C31024144300078F83002490A200624E
+:100390003042000F34420020A0A20062A38800383F
+:1003A0008F8300249062000D3042007FA062000D18
+:1003B0008F83003410600018020020218F840030E9
+:1003C0008C8200100043102B1040000924020018FA
+:1003D000020020210E0016C5A38200442403FFFF63
+:1003E000104300182404FFFF0A00182400002021F5
+:1003F0008C820010240500010200202100431023FC
+:100400008F830024240600010E001646AC62001003
+:100410000A001824000020210E0015F9240500010F
+:100420000A00182400002021020020212402000DCF
+:100430008FBF00148FB0001027BD00180A0016C52A
+:10044000A38200448FBF00148FB0001000801021E1
+:1004500003E0000827BD001827BDFFC8AFB2002089
+:10046000AFBF0034AFB60030AFB5002CAFB400283A
+:10047000AFB30024AFB1001CAFB000188F46012805
+:100480003C0308008C6331A02402FF80AF86004843
+:1004900000C318213065007F03452821006218241D
+:1004A0003C02000AAF43002400A2282190A200626F
+:1004B00000809021AF850014304200FF000211023D
+:1004C000A382003890A200BC304200021440000217
+:1004D00024030034240300308F820014A3830028F7
+:1004E000938300388C4200C0A3800044AF82003C5C
+:1004F00024020004106203148F84003C8E44000424
+:10050000508003118F84003C8E4200103083FFFF27
+:10051000A784003A106002F7AF8200408F84001475
+:100520002403FF809082006300621024304200FFA9
+:10053000144002C79785003A9383003824020002D2
+:1005400030B6FFFF14620005000088219382002866
+:100550002403FFFD0A001B11AF82003C8F82003C88
+:1005600002C2102B144002998F8400400E0014EC3C
+:1005700000000000938300283C040800248477785E
+:10058000240200341462002EAF84002C3C0A0800C0
+:100590008D4A77A82402FFFFAFA200100080382107
+:1005A0002405002F3C09080025297378240800FF42
+:1005B0002406FFFF90E2000024A3FFFF00062202B2
+:1005C00000C21026304200FF0002108000491021B6
+:1005D0008C420000306500FF24E7000114A8FFF5FD
+:1005E0000082302600061027AFA20014AFA2001030
+:1005F0000000282127A7001027A6001400C51023FB
+:100600009044000324A2000100A71821304500FFF8
+:100610002CA200041440FFF9A06400008FA2001077
+:100620001142000724020005024020210E0016C5D9
+:10063000A38200442403FFFF104300642404FFFF4F
+:100640003C0208009042777C104000098F82001421
+:10065000024020212402000C0E0016C5A382004493
+:100660002403FFFF104300592404FFFF8F8200146E
+:10067000A380001C3C0308008C63777C8C440080C2
+:100680003C0200FF3442FFFF006218240083202B4D
+:1006900010800008AF83003402402021240200199A
+:1006A0000E0016C5A38200442403FFFF1043004739
+:1006B0002404FFFF8F87003C9782003A8F85003427
+:1006C000AF8700200047202310A0003BA784003AFA
+:1006D0008F86001430A200030002102390C300BCD8
+:1006E0003050000300B0282100031882307300014D
+:1006F0000013108000A228213C0308008C6331A065
+:100700008F8200483084FFFF0085202B004310219A
+:1007100010800011244200888F84002C1082000E6B
+:100720003C033F013C0208008C42777800431024D0
+:100730003C0325001443000630E500FF8C820000D6
+:10074000ACC200888C8200100A0018E9ACC2009884
+:100750000E001529000030219382001C8F850014A3
+:100760008F830040020238218F82003CA387001C47
+:1007700094A400E4006218218F82003434841000B5
+:10078000AF83004000503021A4A400E41260000EAA
+:10079000AF86003C24E20004A382001C94A200E483
+:1007A00024C30004AF83003C34422000A4A200E430
+:1007B0000A001906000020218F820040AF80003C13
+:1007C00000471021AF820040000020212414FFFFC9
+:1007D000109402092403FFFF3C0808008D08778865
+:1007E0003C0208008C4231B03C03080090637778EB
+:1007F00031043FFF0082102B1040001B3067003F88
+:100800003C0208008C4231A88F83004800042180FC
+:1008100000621821006418213062007F0342282101
+:100820003C02000C00A228213C020080344200015E
+:100830003066007800C230252402FF800062102458
+:10084000AF42002830640007AF4208048F820014D2
+:100850000344202124840940AF460814AF850024B6
+:10086000AF840030AC4301189383003824020003A6
+:10087000146201C7240200012402002610E201C90B
+:1008800028E2002710400013240200322402002234
+:1008900010E201C428E200231040000824020024D2
+:1008A0002402002010E201B02402002110E2013FE6
+:1008B000024020210A001AF32402000B10E201B9C1
+:1008C0002402002510E20010024020210A001AF341
+:1008D0002402000B10E201A628E2003310400006BB
+:1008E0002402003F2402003110E200920240202145
+:1008F0000A001AF32402000B10E2019D024020219D
+:100900000A001AF32402000B8F90002C3C0308000D
+:100910008C6331B08F8500308E0400100000A82158
+:100920008CB3001430823FFF0043102B8CB10020A9
+:10093000504001870240202190A3000D2402FF8037
+:1009400000431024304200FF50400181024020212A
+:1009500000041382304200031440017D0240202134
+:1009600094A3001C8F8200148E040028A443011459
+:100970008CA20010026218231064000302402021A0
+:100980000A00197C2402001F8F82003400621021AB
+:100990000262102B104000088F83002402402021A7
+:1009A000240200180E0016C5A38200441054016CE6
+:1009B0002404FFFF8F8300248F8400348C62001096
+:1009C0000224882100441023AC6200108F8200149E
+:1009D000AC7100208C4200680051102B10400009BF
+:1009E0008F830030024020212402001D0E0016C516
+:1009F000A38200442403FFFF104301592404FFFF96
+:100A00008F8300308E0200248C6300241043000783
+:100A1000024020212402001C0E0016C5A3820044BF
+:100A20002403FFFF1043014E2404FFFF8F840024A2
+:100A30008C82002424420001AC8200241233000482
+:100A40008F8200148C4200685622000E8E02000035
+:100A50008E0200003C030080004310241440000D6F
+:100A60002402001A024020210E0016C5A382004471
+:100A70002403FFFF1043013A2404FFFF0A0019BAC0
+:100A80008E0200143C0300800043102450400003F9
+:100A90008E020014AC8000208E0200142411FFFF8F
+:100AA000105100062402001B024020210E0016C532
+:100AB000A38200441051012A2404FFFF8E0300008A
+:100AC0003C02000100621024104000123C02008031
+:100AD0000062102414400008024020212402001A61
+:100AE0000E0016C5A38200442403FFFF1043011C1F
+:100AF0002404FFFF02402021020028210E0016E5F9
+:100B0000240600012403FFFF104301152404FFFF06
+:100B1000241500018F83002402A0302102402021EF
+:100B20009462003624050001244200010A001AD70D
+:100B3000A46200368F90002C3C0308008C6331B017
+:100B40008E13001032623FFF0043102B10400089CB
+:100B50008F8400302402FF809083000D0043102416
+:100B6000304200FF104000842402000D0013138265
+:100B700030420003240300011443007F2402000DCF
+:100B80009082000D30420008544000048F820034EF
+:100B9000024020210A001A082402002450400004C8
+:100BA0008E03000C024020210A001A0824020027AC
+:100BB0008C82002054620006024020218E0300082F
+:100BC0008C820024506200098E0200140240202111
+:100BD000240200200E0016C5A382004410540071A8
+:100BE0002403FFFF0A001A3D8F8400242411FFFF15
+:100BF000145100048F860014024020210A001A3884
+:100C0000240200258E0300188CC2007C10620003B1
+:100C10002402000E0A001A38024020218E0300240C
+:100C20008C82002810620003240200210A001A3876
+:100C3000024020218E0500288C82002C10A2000387
+:100C40002402001F0A001A38024020218E03002CC3
+:100C500014600003240200230A001A3802402021F5
+:100C60008CC200680043102B1040000324020026B1
+:100C70000A001A38024020218C82001400651821D5
+:100C80000043102B104000088F84002402402021D4
+:100C9000240200220E0016C5A38200441051004118
+:100CA0002403FFFF8F8400242403FFF79082000DAC
+:100CB00000431024A082000D8F8600143C0308001E
+:100CC0008C6331AC8F82004894C400E08F8500248F
+:100CD0000043102130847FFF000420400044102195
+:100CE0003043007F034320213C03000E008320217A
+:100CF0002403FF8000431024AF42002CA493000083
+:100D00008CA2002824420001ACA200288CA2002C56
+:100D10008E03002C00431021ACA2002C8E02002C6C
+:100D2000ACA200308E020014ACA2003494A2003AAF
+:100D300024420001A4A2003A94C600E03C0208004C
+:100D40008C4231B024C4000130837FFF1462000F55
+:100D500000803021240280000082302430C2FFFF56
+:100D6000000213C2304200FF000210270A001A7668
+:100D7000000233C02402000D024020210E0016C5DF
+:100D8000A38200440A001A7C004018218F820014BC
+:100D900002402021240500010E0015F9A44600E0C0
+:100DA000000018210A001B0E006088218F90002C83
+:100DB0003C0308008C6331B08E05001030A23FFF69
+:100DC0000043102B104000612402FF808F8400300C
+:100DD0009083000D00431024304200FF5040005C1F
+:100DE000024020218F8200341040000B0005138246
+:100DF0008F8200149763000A944200603042FFFF24
+:100E000014430005000513828F8200202404FFFD97
+:100E10000A001AEBAF82003C304200031440000E7F
+:100E20000000000092020002104000058E03002422
+:100E300050600015920300030A001AA70240202107
+:100E40008C82002450620010920300030240202193
+:100E50000A001AAF2402000F9082000D30420008F1
+:100E60005440000992030003024020212402001094
+:100E70000E0016C5A38200442403FFFF1043003870
+:100E80002404FFFF92030003240200025462000CBA
+:100E9000920200038F820034544000099202000342
+:100EA000024020212402002C0E0016C5A38200441B
+:100EB0002403FFFF1043002A2404FFFF92020003D3
+:100EC0000200282102402021384600102CC60001D3
+:100ED0002C4200010E0016E5004630252410FFFFCD
+:100EE0001050001F2404FFFF8F8300341060001394
+:100EF000024020213C0208008C42318C0043102B20
+:100F00001440000700000000000028212406000112
+:100F10000E001646000000000A001AEB0000202117
+:100F20002402002D0E0016C5A38200441050000CB0
+:100F30002404FFFF0A001AEB000020210E0015F91F
+:100F4000240500010A001AEB0000202102402021A4
+:100F50002402000D0E0016C5A3820044004020218B
+:100F60000A001B0E008088211514000E00000000EE
+:100F70000E00174C024020210A001B0E0040882161
+:100F80000E0016C5A38200440A001B0E00408821F3
+:100F900014620017022018212402002314E2000525
+:100FA0002402000B0E0017C0024020210A001B0E75
+:100FB0000040882102402021A38200440E0016C573
+:100FC0002411FFFF0A001B0F0220182130A500FF8B
+:100FD0000E001529240600019783003A8F82003CF9
+:100FE000A780003A00431023AF82003C0220182162
+:100FF0001220003E9782003A2402FFFD5462003E18
+:101000008E4300208E4200048F830014005610236C
+:10101000AE420004906200633042007FA062006331
+:101020008E4200208F840014A780003A34420002D0
+:10103000AE420020A48000E4908200632403FFBF3E
+:1010400000431024A08200630A001B518E4300203D
+:101050009082006300621024304200FF10400023A1
+:101060009782003A90820088908300BD2485008892
+:101070003042003F2444FFE02C820020A383001C68
+:1010800010400019AF85002C2402000100821804D2
+:10109000306200191440000C3C028000344200020F
+:1010A000006210241440000B306200201040000F3A
+:1010B0009782003A90A600010240202124050001F9
+:1010C0000A001B4B30C60001024020210A001B4AC7
+:1010D00024050001024020210000282124060001EF
+:1010E0000E001646000000009782003A1440FD0CE6
+:1010F0008F8400148E4300203062000410400012E0
+:101100008F84003C2402FFFB00621024AE420020CA
+:10111000274301808F4201B80440FFFE8F820048C0
+:10112000AC6200008F420124AC62000424026083A0
+:10113000A462000824020002A062000B3C0210001E
+:10114000AF4201B88F84003C8F8300148FBF0034FE
+:101150008FB600308FB5002C8FB400288FB30024D9
+:101160008FB200208FB1001C8FB000182402000144
+:1011700027BD003803E00008AC6400C030A500FFC4
+:101180002403000124A900010069102B1040000C69
+:1011900000004021240A000100A31023004A380463
+:1011A00024630001308200010069302B10400002EE
+:1011B000000420420107402554C0FFF800A310237B
+:1011C00003E00008010010213C020800244260A452
+:1011D0003C010800AC22736C3C0208002442530816
+:1011E0003C010800AC2273702402000627BDFFE01A
+:1011F0003C010800A02273743C021EDCAFB2001850
+:10120000AFB10014AFBF001CAFB0001034526F413B
+:1012100000008821240500080E001B7202202021F6
+:10122000001180803C07080024E773780002160054
+:1012300002071821AC6200000000282124A200014E
+:101240003045FFFF8C6200002CA60008044100021C
+:10125000000220400092202614C0FFF8AC64000079
+:10126000020780218E0400000E001B72240500205E
+:10127000262300013071FFFF2E2301001460FFE5DB
+:10128000AE0200008FBF001C8FB200188FB1001497
+:101290008FB0001003E0000827BD002027BDFFD855
+:1012A000AFB3001CAFB20018AFBF0020AFB1001445
+:1012B000AFB000108F5101408F48014800089402E0
+:1012C000324300FF311300FF8F4201B80440FFFE9C
+:1012D00027500180AE1100008F420144AE0200048D
+:1012E00024020002A6120008A202000B240200142D
+:1012F000AE1300241062002528620015104000087B
+:101300002402001524020010106200302402001292
+:10131000106200098FBF00200A001CAD8FB3001CB3
+:101320001062007024020022106200378FBF00207C
+:101330000A001CAD8FB3001C3C0208008C4231A097
+:101340002403FF800222102100431024AF42002416
+:101350003C0208008C4231A0022210213042007F62
+:10136000034218213C02000A00621821166000BCEA
+:10137000AF830014906200623042000F34420030AC
+:10138000A06200620A001CAC8FBF00203C04600019
+:101390008C832C083C02F0033442FFFF00621824C7
+:1013A000AC832C083C0208008C4231A08C832C08B2
+:1013B000244200740002108200021480006218258A
+:1013C000AC832C080A001CAC8FBF00203C02080034
+:1013D0008C4231A02403FF800222102100431024FC
+:1013E000AF4200243C0208008C4231A03C03000ABA
+:1013F000022210213042007F0342102100431021BD
+:101400000A001CABAF8200143C0208008C4231A0E1
+:101410002405FF800222102100451024AF42002441
+:101420003C0208008C4231A0022210213042007F91
+:10143000034218213C02000A0062182190620063F6
+:1014400000A21024304200FF10400085AF8300143A
+:1014500024620088944300123C0208008C4231A8A8
+:1014600030633FFF00031980022210210043102146
+:101470003043007F03432021004510243C03000C2F
+:1014800000832021AF4200289082000D00A210248A
+:10149000304200FF10400072AF8400249082000DA3
+:1014A000304200101440006F8FBF00200E0015C89E
+:1014B000000000008F4201B80440FFFE0000000061
+:1014C000AE1100008F420144AE020004240200026B
+:1014D000A6120008A202000BAE1300240A001CACE6
+:1014E0008FBF00202406FF8002261024AF42002078
+:1014F0003C0208008C4231A031043FFF00042180EF
+:101500000222102100461024AF4200243C030800B0
+:101510008C6331A83C0208008C4231A03227007F46
+:101520000223182102221021006418213042007F7A
+:101530003064007F034228213C02000A0066182420
+:1015400000A22821034420213C02000C008220211B
+:10155000AF4300283C020008034718210062902195
+:10156000AF850014AF8400240E0015C8010080214F
+:101570008F4201B80440FFFE8F8200248F84001444
+:10158000274501809042000DACB10000A4B00006D8
+:10159000000216000002160300021027000237C2E4
+:1015A00014C00016248200889442001232033FFFC8
+:1015B00030423FFF14430012240260829083006394
+:1015C0002402FF8000431024304200FF5040000CF2
+:1015D00024026082908200623042000F3442004058
+:1015E000A082006224026084A4A200082402000DEC
+:1015F000A0A200050A001C963C022700240260827B
+:10160000A4A20008A0A000053C02270000061C00C0
+:101610000062182524020002A0A2000BACA3001057
+:10162000ACA00014ACA00024ACA00028ACA0002CFE
+:101630008E42004C8F840024ACA200189083000DD1
+:101640002402FF8000431024304200FF10400005B8
+:101650008FBF00209082000D3042007FA082000DDD
+:101660008FBF00208FB3001C8FB200188FB1001401
+:101670008FB000103C02100027BD002803E00008D6
+:04168000AF4201B8BC
+:0C1684000800343008003430080033A89F
+:10169000080033E0080034140800343808003438F7
+:0816A00008003438080033187B
+:0816A8000A000124000000000B
+:1016B000000000000000000D747061362E322E31E3
+:1016C0000000000006020101000000000000000010
 :1016D000000000000000000000000000000000000A
 :1016E00000000000000000000000000000000000FA
 :1016F00000000000000000000000000000000000EA
 :1017000000000000000000000000000000000000D9
 :1017100000000000000000000000000000000000C9
 :1017200000000000000000000000000000000000B9
-:1017300010000003000000000000000D0000000D7C
-:101740003C02080024421C003C030800246320944F
-:10175000AC4000000043202B1480FFFD2442000415
-:101760003C1D080037BD2FFC03A0F0213C100800F1
-:10177000261004903C1C0800279C1C000E00015CF5
-:10178000000000000000000D3084FFFF30820007E1
-:101790008F85001810400002248300073064FFF892
-:1017A0000085302130C41FFF03441821247B4000F2
-:1017B000AF85001CAF84001803E00008AF4400842C
-:1017C0003084FFFF308200078F8500208F8600283D
-:1017D00010400002248300073064FFF800852021B8
-:1017E0000086182B14600002AF8500240086202399
-:1017F0000344282134068000AF840020AF440080D9
-:1018000000A6202103E00008AF84003827BDFFD8E0
-:10181000AFB3001CAFB20018AFB00010AFBF0024D0
-:10182000AFB40020AFB100143C0860088D14500024
-:101830002418FF7F3C1A8000029898243672380CD6
-:10184000AD1250008F5100083C07601C3C0860003E
-:1018500036300001AF500008AF800018AF40008064
-:10186000AF4000848CE600088D0F08083C07601626
-:101870008CEC000031EEFFF039CA00103C0DFFFF88
-:10188000340B80003C030080034B48212D440001B1
-:10189000018D28243C0253533C010800AC23042052
-:1018A000AF890038AF860028AF840010275B400066
-:1018B00014A2000334E37C008CF9000403281821EF
-:1018C0008C7F007C8C6500783C0280003C0B08001B
-:1018D0008D6B048C3C0A08008D4A048834520070D9
-:1018E000AF85003CAF9F00403C13080026731C44AA
-:1018F0000240A0218E4800008F46000038C300013E
-:101900003064000110800017AF8800340280482145
-:101910008D2F00003C0508008CA5045C3C180800D5
-:101920008F18045801E8102300A280210000C8216C
-:101930000202402B03198821022838213C010800AB
-:10194000AC30045C3C010800AC2704588F4E00000A
-:1019500039CD000131AC00011580FFED01E04021DF
-:10196000AF8F00348E5100003C0708008CE7045C08
-:101970003C0D08008DAD04580228802300F0602142
-:10198000000070210190302B01AE1821006620214B
-:101990003C010800AC2C045C3C010800AC24045859
-:1019A0008F4601088F47010030C92000AF86000034
-:1019B000AF87000C1120000A00C040213C1808002D
-:1019C0008F18042C270800013C010800AC28042CC7
-:1019D0003C184000AF5801380A0001960000000092
-:1019E0009749010400002821014550213122FFFFC1
-:1019F000016258210162F82B015F502130D90200A9
-:101A00003C010800AC2B048C3C010800AC2A048883
-:101A10001720001524040F0010E40013000000003C
-:101A200024080D0010E8023B30CD000611A0FFE9AC
-:101A30003C184000936E00002409001031C400F0EF
-:101A40001089027124020070108202E58F88001450
-:101A5000250F0001AF8F00143C184000AF5801382B
-:101A60000A00019600000000974C01041180FFD984
-:101A70003C18400030C34000146000A1000000008A
-:101A80008F46017804C0FFFE8F87003824100800BD
-:101A9000240F00088CE30008AF500178A74F0140E5
-:101AA000A7400142974E01048F86000031C9FFFF15
-:101AB00030CD000111A002E1012040212531FFFEBF
-:101AC00024180002A75801463228FFFFA7510148F9
-:101AD0003C1908008F39043C172002D08F8C000C71
-:101AE00030DF002017E00002240400092404000174
-:101AF00030C20C0024050400504500013484000469
-:101B0000A744014A3C1108008E3104203C180048CB
-:101B10003C1000010238182530CF00020070282543
-:101B200011E00004000018213C19010000B928252B
-:101B30002403000130DF000453E00005AF830008F8
-:101B40003C06001000A6282524030001AF830008EE
-:101B5000AF45100000000000000000000000000081
-:101B6000000000008F8300081060002300000000C8
-:101B70008F45100004A1FFFE000000001060001E51
-:101B8000000000008F4410003C0C0020008C10244A
-:101B9000104000198F8E000031CD000211A00016F8
-:101BA00000000000974F101415E000130000000023
-:101BB000975910083338FFFF2711000600111882CB
-:101BC0000003308000C72821323000013223000397
-:101BD0001200032C8CA200000000000D00C7F821A9
-:101BE000AFE200003C0508008CA5043024A60001EB
-:101BF0003C010800AC2604308F6D00003402FFFF6A
-:101C0000AF8D00048CEC0000118202A600002021A0
-:101C10008CED000031AC01001180028A0000000050
-:101C20003C0208008C4204743C0308008C63044CA2
-:101C30003C1F08008FFF04703C1808008F180448F0
-:101C4000004838210068802100E8282B03E4302177
-:101C50000208402B0304882100C570210228782146
-:101C60003C010800AC30044C3C010800AC2F044897
-:101C70003C010800AC2704743C010800AC2E047041
-:101C80008F8400180120302131290007249F00088B
-:101C900033F91FFF03594021AF84001CAF9900188E
-:101CA000251B4000AF590084112000038F830020C2
-:101CB00024C200073046FFF88F84002800C3282183
-:101CC00000A4302B14C00002AF83002400A42823FA
-:101CD00003456021340D8000018D10213C0F100060
-:101CE000AF850020AF820038AF450080AF4F01784C
-:101CF0008F880014250F00010A0001EFAF8F001438
-:101D00008F6200088F67000024050030000776020C
-:101D100031C300F0106500A7240F0040546FFF4C42
-:101D20008F8800148F4B01780560FFFE00000000D3
-:101D300030CA020015400003000612820000000DA8
-:101D400000061282304D0003000D4900012D1821BC
-:101D500000038080020D40210008608001938021F3
-:101D60008E1F000017E00002000000000000000DC0
-:101D70008F6E000405C202BD92070006920E000598
-:101D8000920200043C090001000E18800070F82146
-:101D90008FED0018277100082448000501A9602173
-:101DA00000083082AFEC0018022020210E00059EB2
-:101DB00026050014920A00068F7900043C0B7FFF71
-:101DC000000A2080009178218DF800043566FFFF1D
-:101DD0000326282403053821ADE70004920E0005F0
-:101DE000920D0004960C0008000E10800051C821CE
-:101DF0008F230000974901043C07FFFF0067582428
-:101E00003128FFFF010DF82103EC50233144FFFF7F
-:101E100001643025AF26000092030007241800015A
-:101E200010780275240F0003106F02850000000077
-:101E30008E0500102419000AA7590140A745014248
-:101E4000921800048F860000240F0001A758014457
-:101E5000A74001469747010430D100023C050041EC
-:101E6000A747014800001821A74F014A122000038C
-:101E700030CB00043C050141240300015160000502
-:101E8000AF8300083C06001000A6282524030001AB
-:101E9000AF830008AF451000000000000000000004
-:101EA00000000000000000008F8A000811400004BC
-:101EB000000000008F4410000481FFFE00000000BD
-:101EC0008F6B0000920800043C1108008E3104441E
-:101ED000AF8B000497590104311800FF3C0E080035
-:101EE0008DCE04403325FFFF0305382102276021F2
-:101EF00000001021250F000A31E8FFFF0187482B61
-:101F000001C2682101A9F821311000073C01080035
-:101F1000AC2C04443C010800AC3F04401200000318
-:101F20008F8C00182506000730C8FFF8010C6821C7
-:101F300031BF1FFFAF8C001CAF9F0018AF5F008444
-:101F400097440104035F80213084FFFF308A00073B
-:101F500011400003261B4000248900073124FFF8AC
-:101F60008F8200208F850028008220210085702B21
-:101F700015C00002AF820024008520233C0B08001E
-:101F80008D6B048C3C0A08008D4A04880344882128
-:101F900034038000022310213C0F1000AF84002086
-:101FA000AF820038AF440080AF4F01780A0002963C
-:101FB0008F8800148F5001780600FFFE30D1020098
-:101FC00016200003000612820000000D0006128297
-:101FD000305F0003001F1900007F302100062080C1
-:101FE000009FC82100194880013380218E1800000D
-:101FF00013000002000000000000000D8F6C000CB8
-:10200000058001FB8F870038240E0001AE0E000012
-:102010008CE30008A20000078F650004000554024D
-:10202000314D00FF25A80005000830822CCB00416F
-:1020300015600002A20A00040000000D8F78000461
-:102040003C03FFFF00E02821330BFFFF256C000B52
-:10205000000C108200022080008748218D3F000084
-:1020600026040014A618000803E3C8240E00059EE9
-:10207000AD3900008F4F01083C11100001F13824E8
-:1020800010E001AB00000000974D0104920800072A
-:1020900025AAFFEC350600023144FFFFA206000727
-:1020A000960600082CC7001354E0000592030007B1
-:1020B00092110007362F0001A20F000792030007BC
-:1020C00024180001107801C224090003106901D509
-:1020D0008F88003830CBFFFF257100020011788314
-:1020E00031E400FF00042880A20F000500A8482169
-:1020F0008D2D0000974A01043C0EFFFF01AEF8242D
-:102100003143FFFF006B1023244CFFFE03ECC82576
-:10211000AD390000920600053C03FFF63462FFFF74
-:1021200030D800FF0018388000F08821922F00146A
-:102130003C04FF7F3487FFFF31EE000F01C65821BA
-:10214000316500FF00055080015068218DAC0020F2
-:102150000148F821A20B00060182C824AE0C000C35
-:10216000AFF9000C920900068E11000C03277824A9
-:102170000009C0800310702195C60026030828219D
-:1021800002272024AE04000CADCF0020ADC60024F1
-:10219000ACA600108F8800003C0B08008D6B048CEF
-:1021A0003C0A08008D4A0488241F001024190002EC
-:1021B000A75F0140A7400142A7400144A75901463B
-:1021C0009749010424070001310600022538FFFE6B
-:1021D000A75801483C050009A747014A10C0000361
-:1021E000000018213C05010924030001310C000402
-:1021F00051800005AF8300083C08001000A8282586
-:1022000024030001AF830008AF4510000000000068
-:102210000000000000000000000000009205000423
-:1022200024AE000231CD0007000D182330620007F4
-:10223000AE0200108F9000081200000400000000A1
-:102240008F4F100005E1FFFE000000008F710000BD
-:102250008F8E00183C0308008C630444AF91000487
-:102260009745010425CF001031E61FFF30A2FFFF84
-:10227000AF8E001CAF860018AF4600842449FFFED5
-:102280003C0C08008D8C0440974D010401208021F6
-:10229000000947C30070C02131A9FFFF0310F82BCC
-:1022A0000188C821033F202103463821313100072E
-:1022B0003C010800AC3804443C010800AC24044054
-:1022C0001220000324FB40002527000730E9FFF817
-:1022D0008F8600208F8400280126382100E4C02B3F
-:1022E00017000002AF86002400E4382303472021B2
-:1022F00034198000009910213C0F1000AF87002096
-:10230000AF820038AF470080AF4F01780A000296D5
-:102310008F8800149747010410E0FDAE3C18400080
-:102320008F5801780700FFFE30C5400010A0000361
-:102330003C1F00080000000D3C1F0008AF5F01407B
-:10234000241008008F860000AF50017897440104E4
-:1023500030D90001132000ED3086FFFF24CCFFFEB2
-:10236000240D0002A74D0146A74C01488F9100188B
-:102370002408000DA748014A8F630000262F00089B
-:1023800031E21FFF0342702130C90007AF83000410
-:10239000AF91001CAF82001800C03821AF4200840A
-:1023A0001120000325DB400024D800073307FFF885
-:1023B0008F8500208F84002800E5302100C4382B51
-:1023C00014E00002AF85002400C430238F84001481
-:1023D0000346F821340C8000AF86002003EC8021F6
-:1023E000AF460080249900013C0610003C184000D4
-:1023F000AF460178AF900038AF990014AF5801385C
-:102400000A000196000000008F630000975101044C
-:102410003067FFFF3228FFFF8F4F017805E0FFFE96
-:1024200030EC0007000CF82333F0000724F9FFFE1E
-:102430002404000AA7440140A7500142A7590144BF
-:10244000A7400146A74801488F45010830B8002041
-:1024500017000002240300092403000130CD00020C
-:10246000A743014A3C04004111A0000300001821C9
-:102470003C0401412403000130C90004512000053F
-:10248000AF8300083C0600100086202524030001CD
-:10249000AF830008AF4410000000000000000000FF
-:1024A00000000000000000008F8E000811C0000432
-:1024B000000000008F4210000441FFFE00000000F9
-:1024C0008F7F0000276400088F91003CAF9F0004BD
-:1024D000948500089490000A9499000C30AFFFFF97
-:1024E0000010C4003323FFFF11F100A603032025D1
-:1024F0003C0E08008DCE04443C0C08008D8C04403A
-:1025000000E888212626FFFE01C628210000682158
-:1025100000A6F82B018D2021009F80213C0108009E
-:10252000AC2504443C010800AC30044024E200081F
-:102530003042FFFF3047000710E000038F83001890
-:10254000244F000731E2FFF83106FFFF30C80007D3
-:102550000043802132191FFF0359C021AF83001CA3
-:10256000AF990018271B4000AF59008411000003E9
-:102570008F8C002024C5000730A6FFF88F84002828
-:1025800000CC282100A4F82B17E00002AF8C002417
-:1025900000A42823AF850020AF4500803C0408003C
-:1025A0008C84043403454821340E8000012E6821B8
-:1025B00010800005AF8D0038939100172406000E9F
-:1025C000122600112407043F3C021000AF4201789C
-:1025D0008F880014250F00010A0001EFAF8F00144F
-:1025E0000E0005C400E020218F8800143C0B080079
-:1025F0008D6B048C3C0A08008D4A0488250F00016D
-:102600000A0001EFAF8F00143C021000A7470148F9
-:10261000AF4201780A0004CE8F88001424040F0012
-:102620001184003D30CE002015C0000224030009B3
-:10263000240300010A00021AA743014A0A00020DFE
-:10264000A740014694EF000894F1000A94F0000CB2
-:102650008F8C003C001174003207FFFF31EDFFFF4B
-:1026600011AC003701C720253C1808008F1804441E
-:102670003C0F08008DEF0440000080210308682112
-:1026800001A8382B01F0702101C760213C0108002E
-:10269000AC2D04443C010800AC2C04400A00027A32
-:1026A0008F8400183C0208008C42047C3C03080024
-:1026B0008C6304543C1F08008FFF04783C1808000A
-:1026C0008F180450004838210068802100E8282B2A
-:1026D00003E430210208402B0304882100C5702147
-:1026E000022878213C010800AC3004543C01080069
-:1026F000AC2F04503C010800AC27047C3C010800CE
-:10270000AC2E04780A00027A8F840018A740014694
-:102710000A0004358F91001830CD002015A0FFC5A8
-:102720002403000D240300050A00021AA743014AEE
-:10273000974E010425C5FFF00A00038130A4FFFF76
-:102740008F9800401498FFC8000010213C05080035
-:102750008CA5046C3C1F08008FFF046800A8C821EA
-:102760000328302B03E22021008640213C01080091
-:10277000AC39046C3C010800AC2804680A00027AF9
-:102780008F8400188F8C0040148CFF5900E8C821FA
-:102790003C1808008F18046C3C1108008E31046846
-:1027A0002723FFFE03034821000010210123302BC3
-:1027B0000222702101C668213C010800AC29046C8A
-:1027C0003C010800AC2D04680A0004A524E20008BE
-:1027D0008F8800383C03FFFF8D02000C0043F82473
-:1027E00003E4C825AD19000C0A00038F30CBFFFFAE
-:1027F0000A0003C3AE000000974A010492040004DB
-:102800008E26000C014458212579FFF200C7C02410
-:102810003325FFFF03053825AE27000C0A0002E62A
-:102820008E0500103C0DFFFF8D0A0010014D58244D
-:1028300001646025AD0C00100A00038F30CBFFFF50
-:1028400097430104920E00048E290010006E10219F
-:10285000244DFFEE0127602431A8FFFF0188F825F1
-:10286000AE3F00100A0002E68E0500108E0F000C2D
-:10287000AE00000000078880023028210A0002B85C
-:10288000ACAF00201460000D3058FFFF3C04FFFF88
-:102890000044682401A47026000E602B000D102B4C
-:1028A000004CF82413E00002000000000000000DBE
-:1028B0008CAF00000A00025001E410253B03FFFF2B
-:1028C0000003882B0018802B0211202410800002A6
-:1028D000000000000000000D8CB900000A0002504A
-:1028E0003722FFFF3084FFFF30A5FFFF1080000775
-:1028F0000000182130820001104000020004204234
-:10290000006518211480FFFB0005284003E0000843
-:102910000060102110C00007000000008CA2000021
-:1029200024C6FFFF24A50004AC82000014C0FFFBF6
-:102930002484000403E000080000000010A0000848
-:1029400024A3FFFFAC860000000000000000000090
-:102950002402FFFF2463FFFF1462FFFA24840004B3
-:1029600003E0000800000000308EFFFF30D8FFFFBA
-:1029700000057C0001F8602539CDFFFF01AC502136
-:10298000014C582B014B4821000944023127FFFF1D
-:1029900000E830210006240230C5FFFF00A4182102
-:1029A0003862FFFF03E000083042FFFF3C0C0800E4
-:1029B0008D8C0484240BFF8027BDFFD0018450211F
-:1029C000014B4824AF4900203C0808008D080484CE
-:1029D000AFB20020AFB00018AFBF0028AFB30024E3
-:1029E000AFB1001C936600040104382130E4007F7D
-:1029F000009A10213C0300080043902130C50020BC
-:102A0000036080213C080111277B000814A000020C
-:102A1000264600702646006C92130004975101046C
-:102A2000920F00043267000F322EFFFF31ED00409D
-:102A300001C7282311A0000500004821925900BCBD
-:102A4000333800041700009000000000924300BCDF
-:102A5000307F000413E0000F0000000010A0000D04
-:102A600000000000960E0002240AFF8000A76021EB
-:102A700025CDFFFEA74D1016920B0004014B20241C
-:102A8000308200FF10400085010C40253C0F0400FF
-:102A9000010F40258F5301780660FFFE2404000AD1
-:102AA000A7440140960D00022404000931AC000740
-:102AB000000C5823316A0007A74A0142960200021F
-:102AC0002443FFFEA7430144A7400146975F01044A
-:102AD000A75F01488F5901083338002053000001D7
-:102AE00024040001920F000431EE001015C0000212
-:102AF0003483001000801821A743014A0000000021
-:102B0000000000000000000000000000AF481000BE
-:102B100000000000000000000000000000000000B5
-:102B20008F5110000621FFFE3113FFFF12600003DA
-:102B3000000000008F481018ACC800009603000683
-:102B4000307FFFFF27F90002001998820013888068
-:102B5000023B30218CD800001520005700183402A9
-:102B6000920300042405FF8000A3F82433F100FF42
-:102B70001220002C00000000924700BC30F200023E
-:102B80001240002800000000974B100C2562FFFE49
-:102B9000A7421016000000003C0A0400354900302E
-:102BA000AF4910000000000000000000000000001D
-:102BB000000000008F4C10000581FFFE00000000A7
-:102BC0009749100C8F51101C00C020213127FFFFA6
-:102BD00024F20030001218820003288000BBF82184
-:102BE0003226FFFFAFF100000E0005B300112C02EA
-:102BF0000013C880033B98218E7800000002740007
-:102C0000AFB800108FA80010310FFFFFAFAF00105A
-:102C10008FA4001001C46825AFAD00108FA600106E
-:102C2000AE66000097730008976D000A9766000C67
-:102C30008F8A003C000D5C0030CCFFFF3262FFFF4A
-:102C4000104A0036016C2025960600023C10100048
-:102C500024D300080E00013B3264FFFF974C0104AF
-:102C60000E0001493184FFFFAF5001788FBF00286B
-:102C70008FB300248FB200208FB1001C8FB00018DA
-:102C800003E0000827BD003010A0FF700000000026
-:102C900024A5FFFC0A0005EC240900048CD10000E7
-:102CA000AF5110188F5301780660FF7A2404000A90
-:102CB0000A0006010000000000A7C8218F88003824
-:102CC0008F4E101C0019C0820018788001E8202166
-:102CD000AC8E0000000E2C0200C020210E0005B3B7
-:102CE00031C6FFFF023B28218CAD000000025400DA
-:102CF00000403021AFAD00108FAC0010318BFFFFD2
-:102D0000AFAB00108FA2001001424825AFA9001000
-:102D10008FA700100A000631ACA700008F8F00407B
-:102D2000148FFFC90000000097420104960B0002B7
-:102D30003C0508008CA5046C3049FFFF316AFFFF99
-:102D40003C1108008E310468012A382124F2FFFE6C
-:102D500000B240210012FFC30112C82B023FC02164
-:102D6000031920213C010800AC28046C3C01080038
-:102D7000AC2404680A00066B0000000000A4102BBD
-:102D800010400009240300010005284000A4102B76
-:102D900004A00003000318405440FFFC0005284035
-:102DA00010600007000000000085302B14C00002F6
-:102DB00000031842008520231460FFFB0005284211
-:102DC00003E00008008010218F85002C27BDFFE85C
-:102DD000000530272CC300012CA40002008310251D
-:102DE00010400003AFBF00102405007FAF85002C0A
-:102DF0000005282730A5FFFF0E000592240426F5C4
-:102E00008F830030240402BD004030210083382B22
-:102E100010E0000924050001000420400083102B6D
-:102E200004800003000528405440FFFC00042040BB
-:102E300010A0000800C350210064402B15000002C0
-:102E4000000528420064182314A0FFFB0004204260
-:102E500000C350218FBF0010000A4C02312200FF36
-:102E600027BD0018AF8A002C03E00008AF890030AE
-:102E70000A00002A00000000000000000000000D11
-:102E8000747870362E302E313500000006000F00A9
-:102E900000000000000001360000EA6000000000B1
-:102EA0000000000000000000000000000000000022
+:101730000000000000000000000000001000000396
+:10174000000000000000000D0000000D3C02080039
+:1017500024421C003C03080024632094AC40000099
+:101760000043202B1480FFFD244200043C1D080090
+:1017700037BD2FFC03A0F0213C1008002610049078
+:101780003C1C0800279C1C000E00015C00000000AF
+:101790000000000D3084FFFF308200078F850018A5
+:1017A00010400002248300073064FFF800853021D8
+:1017B00030C41FFF03441821247B4000AF85001C68
+:1017C000AF84001803E00008AF4400843084FFFFBA
+:1017D000308200078F8500208F860028104000028D
+:1017E000248300073064FFF8008520210086182B31
+:1017F00014600002AF8500240086202303442821C2
+:1018000034068000AF840020AF44008000A6202171
+:1018100003E00008AF84003827BDFFD8AFB3001C39
+:10182000AFB20018AFB00010AFBF0024AFB40020BB
+:10183000AFB100143C0860088D1450002418FF7FDD
+:101840003C1A8000029898243672380CAD12500071
+:101850008F5100083C07601C3C08600036300001D6
+:10186000AF500008AF800018AF400080AF40008448
+:101870008CE600088D0F08083C0760168CEC000011
+:1018800031EEFFF039CA00103C0DFFFF340B800031
+:101890003C030080034B48212D440001018D282486
+:1018A0003C0253533C010800AC230420AF890038AC
+:1018B000AF860028AF840010275B400014A200030D
+:1018C00034E37C008CF90004032818218C7F007C11
+:1018D0008C6500783C0280003C0B08008D6B048C0A
+:1018E0003C0A08008D4A048834520070AF85003CE1
+:1018F000AF9F00403C13080026731C440240A02107
+:101900008E4800008F46000038C30001306400019B
+:1019100010800017AF880034028048218D2F00000E
+:101920003C0508008CA5045C3C1808008F1804587E
+:1019300001E8102300A280210000C8210202402BF0
+:1019400003198821022838213C010800AC30045CCE
+:101950003C010800AC2704588F4E000039CD00012F
+:1019600031AC00011580FFED01E04021AF8F003464
+:101970008E5100003C0708008CE7045C3C0D080019
+:101980008DAD04580228802300F0602100007021F2
+:101990000190302B01AE1821006620213C01080087
+:1019A000AC2C045C3C010800AC2404588F460108B0
+:1019B0008F47010030C92000AF860000AF87000CC0
+:1019C0001120000A00C040213C1808008F18042C88
+:1019D000270800013C010800AC28042C3C184000FA
+:1019E000AF5801380A000196000000009749010431
+:1019F00000002821014550213122FFFF01625821BA
+:101A00000162F82B015F502130D902003C0108002F
+:101A1000AC2B048C3C010800AC2A0488172000156C
+:101A200024040F0010E400130000000024080D003F
+:101A300010E8023B30CD000611A0FFE93C18400041
+:101A4000936E00002409001031C400F01089027167
+:101A500024020070108202E58F880014250F000117
+:101A6000AF8F00143C184000AF5801380A000196AF
+:101A700000000000974C01041180FFD93C18400081
+:101A800030C34000146000A1000000008F460178C0
+:101A900004C0FFFE8F87003824100800240F0008C0
+:101AA0008CE30008AF500178A74F0140A7400142E6
+:101AB000974E01048F86000031C9FFFF30CD000131
+:101AC00011A002E1012040212531FFFE241800026F
+:101AD000A75801463228FFFFA75101483C190800CA
+:101AE0008F39043C172002D08F8C000C30DF00208F
+:101AF00017E00002240400092404000130C20C0095
+:101B0000240504005045000134840004A744014A20
+:101B10003C1108008E3104203C1800483C100001A4
+:101B20000238182530CF00020070282511E000048B
+:101B3000000018213C19010000B9282524030001E8
+:101B400030DF000453E00005AF8300083C060010BE
+:101B500000A6282524030001AF830008AF4510002C
+:101B60000000000000000000000000000000000075
+:101B70008F83000810600023000000008F451000D4
+:101B800004A1FFFE000000001060001E0000000025
+:101B90008F4410003C0C0020008C102410400019D1
+:101BA0008F8E000031CD000211A000160000000051
+:101BB000974F101415E0001300000000975910080B
+:101BC0003338FFFF27110006001118820003308010
+:101BD00000C7282132300001322300031200032CF9
+:101BE0008CA200000000000D00C7F821AFE2000049
+:101BF0003C0508008CA5043024A600013C01080027
+:101C0000AC2604308F6D00003402FFFFAF8D00045E
+:101C10008CEC0000118202A6000020218CED000057
+:101C200031AC01001180028A000000003C02080073
+:101C30008C4204743C0308008C63044C3C1F080075
+:101C40008FFF04703C1808008F18044800483821A2
+:101C50000068802100E8282B03E430210208402B93
+:101C60000304882100C57021022878213C01080066
+:101C7000AC30044C3C010800AC2F04483C01080087
+:101C8000AC2704743C010800AC2E04708F8400184B
+:101C90000120302131290007249F000833F91FFF5C
+:101CA00003594021AF84001CAF990018251B400048
+:101CB000AF590084112000038F83002024C2000745
+:101CC0003046FFF88F84002800C3282100A4302B61
+:101CD00014C00002AF83002400A428230345602120
+:101CE000340D8000018D10213C0F1000AF850020C5
+:101CF000AF820038AF450080AF4F01788F88001465
+:101D0000250F00010A0001EFAF8F00148F62000859
+:101D10008F670000240500300007760231C300F011
+:101D2000106500A7240F0040546FFF4C8F880014EB
+:101D30008F4B01780560FFFE0000000030CA0200F2
+:101D400015400003000612820000000D00061282FA
+:101D5000304D0003000D4900012D18210003808043
+:101D6000020D402100086080019380218E1F000039
+:101D700017E00002000000000000000D8F6E00045C
+:101D800005C202BD92070006920E000592020004F1
+:101D90003C090001000E18800070F8218FED00183A
+:101DA000277100082448000501A96021000830823D
+:101DB000AFEC0018022020210E00059E260500141D
+:101DC000920A00068F7900043C0B7FFF000A2080F6
+:101DD000009178218DF800043566FFFF0326282442
+:101DE00003053821ADE70004920E0005920D0004B2
+:101DF000960C0008000E10800051C8218F230000AF
+:101E0000974901043C07FFFF006758243128FFFF72
+:101E1000010DF82103EC50233144FFFF016430250C
+:101E2000AF26000092030007241800011078027505
+:101E3000240F0003106F0285000000008E050010C3
+:101E40002419000AA7590140A7450142921800042D
+:101E50008F860000240F0001A7580144A7400146C7
+:101E60009747010430D100023C050041A7470148D3
+:101E700000001821A74F014A1220000330CB0004B4
+:101E80003C0501412403000151600005AF830008B7
+:101E90003C06001000A6282524030001AF8300089B
+:101EA000AF4510000000000000000000000000002E
+:101EB000000000008F8A00081140000400000000AC
+:101EC0008F4410000481FFFE000000008F6B0000B3
+:101ED000920800043C1108008E310444AF8B0004CA
+:101EE00097590104311800FF3C0E08008DCE0440C4
+:101EF0003325FFFF03053821022760210000102150
+:101F0000250F000A31E8FFFF0187482B01C2682135
+:101F100001A9F821311000073C010800AC2C044451
+:101F20003C010800AC3F0440120000038F8C0018F5
+:101F30002506000730C8FFF8010C682131BF1FFFDC
+:101F4000AF8C001CAF9F0018AF5F00849744010462
+:101F5000035F80213084FFFF308A000711400003B7
+:101F6000261B4000248900073124FFF88F820020BF
+:101F70008F850028008220210085702B15C000026B
+:101F8000AF820024008520233C0B08008D6B048C5D
+:101F90003C0A08008D4A04880344882134038000E9
+:101FA000022310213C0F1000AF840020AF820038C4
+:101FB000AF440080AF4F01780A0002968F8800146A
+:101FC0008F5001780600FFFE30D10200162000037A
+:101FD000000612820000000D00061282305F00032E
+:101FE000001F1900007F302100062080009FC821BB
+:101FF00000194880013380218E1800001300000270
+:10200000000000000000000D8F6C000C058001FB3B
+:102010008F870038240E0001AE0E00008CE300080C
+:10202000A20000078F65000400055402314D00FF37
+:1020300025A80005000830822CCB00411560000265
+:10204000A20A00040000000D8F7800043C03FFFF8B
+:1020500000E02821330BFFFF256C000B000C1082E1
+:1020600000022080008748218D3F000026040014D4
+:10207000A618000803E3C8240E00059EAD39000031
+:102080008F4F01083C11100001F1382410E001AB22
+:1020900000000000974D01049208000725AAFFECFC
+:1020A000350600023144FFFFA2060007960600082D
+:1020B0002CC7001354E0000592030007921100079B
+:1020C000362F0001A20F0007920300072418000119
+:1020D000107801C224090003106901D58F880038E7
+:1020E00030CBFFFF257100020011788331E400FF3F
+:1020F00000042880A20F000500A848218D2D0000B3
+:10210000974A01043C0EFFFF01AEF8243143FFFF64
+:10211000006B1023244CFFFE03ECC825AD390000F2
+:10212000920600053C03FFF63462FFFF30D800FF43
+:102130000018388000F08821922F00143C04FF7FA3
+:102140003487FFFF31EE000F01C65821316500FFD3
+:1021500000055080015068218DAC00200148F82115
+:10216000A20B00060182C824AE0C000CAFF9000CD3
+:10217000920900068E11000C032778240009C08004
+:102180000310702195C60026030828210227202469
+:10219000AE04000CADCF0020ADC60024ACA60010EC
+:1021A0008F8800003C0B08008D6B048C3C0A0800F3
+:1021B0008D4A0488241F001024190002A75F0140E3
+:1021C000A7400142A7400144A7590146974901048D
+:1021D00024070001310600022538FFFEA7580148F8
+:1021E0003C050009A747014A10C000030000182160
+:1021F0003C05010924030001310C00045180000555
+:10220000AF8300083C08001000A828252403000123
+:10221000AF830008AF451000000000000000000080
+:1022200000000000000000009205000424AE00023F
+:1022300031CD0007000D182330620007AE020010F8
+:102240008F90000812000004000000008F4F100063
+:1022500005E1FFFE000000008F7100008F8E001866
+:102260003C0308008C630444AF91000497450104CB
+:1022700025CF001031E61FFF30A2FFFFAF8E001CFC
+:10228000AF860018AF4600842449FFFE3C0C0800CE
+:102290008D8C0440974D010401208021000947C323
+:1022A0000070C02131A9FFFF0310F82B0188C8215D
+:1022B000033F202103463821313100073C0108004B
+:1022C000AC3804443C010800AC2404401220000354
+:1022D00024FB40002527000730E9FFF88F86002007
+:1022E0008F8400280126382100E4C02B170000024B
+:1022F000AF86002400E438230347202134198000EE
+:10230000009910213C0F1000AF870020AF820038E9
+:10231000AF470080AF4F01780A0002968F88001403
+:102320009747010410E0FDAE3C1840008F5801783B
+:102330000700FFFE30C5400010A000033C1F00084E
+:102340000000000D3C1F0008AF5F01402410080092
+:102350008F860000AF5001789744010430D9000106
+:10236000132000ED3086FFFF24CCFFFE240D000279
+:10237000A74D0146A74C01488F9100182408000D75
+:10238000A748014A8F630000262F000831E21FFF93
+:102390000342702130C90007AF830004AF91001CD5
+:1023A000AF82001800C03821AF4200841120000322
+:1023B00025DB400024D800073307FFF88F85002075
+:1023C0008F84002800E5302100C4382B14E000027F
+:1023D000AF85002400C430238F8400140346F82105
+:1023E000340C8000AF86002003EC8021AF460080D3
+:1023F000249900013C0610003C184000AF460178CB
+:10240000AF900038AF990014AF5801380A00019618
+:10241000000000008F630000975101043067FFFF48
+:102420003228FFFF8F4F017805E0FFFE30EC0007F8
+:10243000000CF82333F0000724F9FFFE2404000AFF
+:10244000A7440140A7500142A7590144A7400146B3
+:10245000A74801488F45010830B800201700000246
+:10246000240300092403000130CD0002A743014AE0
+:102470003C04004111A00003000018213C0401416C
+:102480002403000130C9000451200005AF83000877
+:102490003C0600100086202524030001AF830008BD
+:1024A000AF44100000000000000000000000000029
+:1024B000000000008F8E000811C000040000000022
+:1024C0008F4210000441FFFE000000008F7F0000DB
+:1024D000276400088F91003CAF9F0004948500089A
+:1024E0009490000A9499000C30AFFFFF0010C400D4
+:1024F0003323FFFF11F100A6030320253C0E080043
+:102500008DCE04443C0C08008D8C044000E88821EA
+:102510002626FFFE01C628210000682100A6F82B10
+:10252000018D2021009F80213C010800AC2504443E
+:102530003C010800AC30044024E200083042FFFFB8
+:102540003047000710E000038F830018244F000776
+:1025500031E2FFF83106FFFF30C800070043802159
+:1025600032191FFF0359C021AF83001CAF99001817
+:10257000271B4000AF590084110000038F8C0020FE
+:1025800024C5000730A6FFF88F84002800CC28213E
+:1025900000A4F82B17E00002AF8C002400A428232D
+:1025A000AF850020AF4500803C0408008C840434D3
+:1025B00003454821340E8000012E6821108000055B
+:1025C000AF8D0038939100172406000E12260011DB
+:1025D0002407043F3C021000AF4201788F880014AA
+:1025E000250F00010A0001EFAF8F00140E0005C493
+:1025F00000E020218F8800143C0B08008D6B048CB8
+:102600003C0A08008D4A0488250F00010A0001EFEA
+:10261000AF8F00143C021000A7470148AF42017879
+:102620000A0004CE8F88001424040F001184003D9A
+:1026300030CE002015C0000224030009240300014D
+:102640000A00021AA743014A0A00020DA7400146E8
+:1026500094EF000894F1000A94F0000C8F8C003C79
+:10266000001174003207FFFF31EDFFFF11AC00379E
+:1026700001C720253C1808008F1804443C0F0800AF
+:102680008DEF0440000080210308682101A8382B49
+:1026900001F0702101C760213C010800AC2D044409
+:1026A0003C010800AC2C04400A00027A8F84001818
+:1026B0003C0208008C42047C3C0308008C630454F8
+:1026C0003C1F08008FFF04783C1808008F18045046
+:1026D000004838210068802100E8282B03E43021DD
+:1026E0000208402B0304882100C5702102287821AC
+:1026F0003C010800AC3004543C010800AC2F0450ED
+:102700003C010800AC27047C3C010800AC2E047896
+:102710000A00027A8F840018A74001460A00043597
+:102720008F91001830CD002015A0FFC52403000DA7
+:10273000240300050A00021AA743014A974E010428
+:1027400025C5FFF00A00038130A4FFFF8F980040E9
+:102750001498FFC8000010213C0508008CA5046CEB
+:102760003C1F08008FFF046800A8C8210328302BF5
+:1027700003E22021008640213C010800AC39046CB2
+:102780003C010800AC2804680A00027A8F84001813
+:102790008F8C0040148CFF5900E8C8213C180800B9
+:1027A0008F18046C3C1108008E3104682723FFFE4B
+:1027B00003034821000010210123302B0222702145
+:1027C00001C668213C010800AC29046C3C010800EA
+:1027D000AC2D04680A0004A524E200088F880038A4
+:1027E0003C03FFFF8D02000C0043F82403E4C825DE
+:1027F000AD19000C0A00038F30CBFFFF0A0003C3A2
+:10280000AE000000974A0104920400048E26000CDA
+:10281000014458212579FFF200C7C0243325FFFF6A
+:1028200003053825AE27000C0A0002E68E050010CD
+:102830003C0DFFFF8D0A0010014D582401646025F6
+:10284000AD0C00100A00038F30CBFFFF974301044B
+:10285000920E00048E290010006E1021244DFFEE10
+:102860000127602431A8FFFF0188F825AE3F001042
+:102870000A0002E68E0500108E0F000CAE0000006C
+:1028800000078880023028210A0002B8ACAF00207F
+:102890001460000D3058FFFF3C04FFFF0044682423
+:1028A00001A47026000E602B000D102B004CF824A4
+:1028B00013E00002000000000000000D8CAF0000DB
+:1028C0000A00025001E410253B03FFFF0003882BA0
+:1028D0000018802B0211202410800002000000004C
+:1028E0000000000D8CB900000A0002503722FFFFE3
+:1028F0003084FFFF30A5FFFF108000070000182183
+:1029000030820001104000020004204200651821BE
+:102910001480FFFB0005284003E000080060102140
+:1029200010C00007000000008CA2000024C6FFFFBA
+:1029300024A50004AC82000014C0FFFB2484000422
+:1029400003E000080000000010A0000824A3FFFF1F
+:10295000AC86000000000000000000002402FFFF21
+:102960002463FFFF1462FFFA2484000403E00008DC
+:1029700000000000308EFFFF30D8FFFF00057C0014
+:1029800001F8602539CDFFFF01AC5021014C582BD7
+:10299000014B4821000944023127FFFF00E83021A4
+:1029A0000006240230C5FFFF00A418213862FFFF93
+:1029B00003E000083042FFFF3C0C08008D8C0484CB
+:1029C000240BFF8027BDFFD001845021014B4824F8
+:1029D000AF4900203C0808008D080484AFB20020F5
+:1029E000AFB00018AFBF0028AFB30024AFB1001CD8
+:1029F000936600040104382130E4007F009A10211E
+:102A00003C0300080043902130C500200360802172
+:102A10003C080111277B000814A000022646007024
+:102A20002646006C9213000497510104920F000493
+:102A30003267000F322EFFFF31ED004001C728231F
+:102A400011A0000500004821925900BC3338000451
+:102A50001700009000000000924300BC307F00048B
+:102A600013E0000F0000000010A0000D00000000A7
+:102A7000960E0002240AFF8000A7602125CDFFFEEC
+:102A8000A74D1016920B0004014B2024308200FF4A
+:102A900010400085010C40253C0F0400010F40252B
+:102AA0008F5301780660FFFE2404000AA74401400A
+:102AB000960D00022404000931AC0007000C5823D5
+:102AC000316A0007A74A0142960200022443FFFE32
+:102AD000A7430144A7400146975F0104A75F01484F
+:102AE0008F590108333800205300000124040001ED
+:102AF000920F000431EE001015C000023483001064
+:102B000000801821A743014A0000000000000000D7
+:102B10000000000000000000AF48100000000000AE
+:102B20000000000000000000000000008F511000B5
+:102B30000621FFFE3113FFFF1260000300000000BA
+:102B40008F481018ACC8000096030006307FFFFFC6
+:102B500027F900020019988200138880023B302177
+:102B60008CD800001520005700183402920300048E
+:102B70002405FF8000A3F82433F100FF1220002C6D
+:102B800000000000924700BC30F200021240002812
+:102B900000000000974B100C2562FFFEA7421016A4
+:102BA000000000003C0A040035490030AF49100025
+:102BB0000000000000000000000000000000000015
+:102BC0008F4C10000581FFFE000000009749100C9B
+:102BD0008F51101C00C020213127FFFF24F200304C
+:102BE000001218820003288000BBF8213226FFFF64
+:102BF000AFF100000E0005B300112C020013C880D5
+:102C0000033B98218E78000000027400AFB80010DA
+:102C10008FA80010310FFFFFAFAF00108FA400107E
+:102C200001C46825AFAD00108FA60010AE6600008D
+:102C300097730008976D000A9766000C8F8A003C16
+:102C4000000D5C0030CCFFFF3262FFFF104A0036FF
+:102C5000016C2025960600023C10100024D30008C9
+:102C60000E00013B3264FFFF974C01040E00014946
+:102C70003184FFFFAF5001788FBF00288FB300244D
+:102C80008FB200208FB1001C8FB0001803E0000845
+:102C900027BD003010A0FF700000000024A5FFFC3D
+:102CA0000A0005EC240900048CD10000AF51101873
+:102CB0008F5301780660FF7A2404000A0A00060197
+:102CC0000000000000A7C8218F8800388F4E101C1C
+:102CD0000019C0820018788001E82021AC8E000025
+:102CE000000E2C0200C020210E0005B331C6FFFFEC
+:102CF000023B28218CAD000000025400004030212E
+:102D0000AFAD00108FAC0010318BFFFFAFAB0010E8
+:102D10008FA2001001424825AFA900108FA7001014
+:102D20000A000631ACA700008F8F0040148FFFC946
+:102D30000000000097420104960B00023C050800C9
+:102D40008CA5046C3049FFFF316AFFFF3C1108007D
+:102D50008E310468012A382124F2FFFE00B240219E
+:102D60000012FFC30112C82B023FC021031920210A
+:102D70003C010800AC28046C3C010800AC24046849
+:102D80000A00066B0000000000A4102B1040000990
+:102D9000240300010005284000A4102B04A0000318
+:102DA000000318405440FFFC000528401060000755
+:102DB000000000000085302B14C000020003184200
+:102DC000008520231460FFFB0005284203E0000873
+:102DD000008010218F85002C27BDFFE800053027DB
+:102DE0002CC300012CA40002008310251040000316
+:102DF000AFBF00102405007FAF85002C00052827F9
+:102E000030A5FFFF0E000592240426F58F830030C5
+:102E1000240402BD004030210083382B10E000095B
+:102E200024050001000420400083102B04800003CF
+:102E3000000528405440FFFC0004204010A000087A
+:102E400000C350210064402B1500000200052842F9
+:102E50000064182314A0FFFB0004204200C350218B
+:102E60008FBF0010000A4C02312200FF27BD00185E
+:0C2E7000AF8A002C03E00008AF8900309E
+:042E7C000A00002A1E
+:102E800000000000000000000000000D74787036A3
+:102E90002E322E310000000006020100000000006A
+:102EA000000001360000EA600000000000000000A1
 :102EB0000000000000000000000000000000000012
 :102EC0000000000000000000000000000000000002
-:102ED00000000016000000000000000000000000DC
+:102ED00000000000000000000000000000000016DC
 :102EE00000000000000000000000000000000000E2
 :102EF00000000000000000000000000000000000D2
-:102F00000000000000000000000013880000000026
-:102F1000000005DC000000000000000010000003BD
-:102F2000000000000000000D0000000D3C02080041
-:102F300024423C203C03080024633DD4AC40000004
-:102F40000043202B1480FFFD244200043C1D080098
-:102F500037BD7FFC03A0F0213C100800261000A81C
-:102F60003C1C0800279C3C200E0002BA0000000018
-:102F70000000000D8F8300383C088000350700708A
-:102F80008CE50000008330253C02900000C2202523
-:102F9000AF850030AF4400208F4900200520FFFEA0
-:102FA0003C038000346200708C4500008F86003046
-:102FB0003C1908008F39007C3C0E08008DCE00784B
-:102FC00000A6202303245821000078210164682BE7
-:102FD00001CF6021018D50213C010800AC2B007C09
-:102FE0003C010800AC2A007803E000080000000063
-:102FF0000A000041240400018F8400383C05800051
-:1030000034A200010082182503E00008AF4300202D
-:1030100003E00008000010213084FFFF30A5FFFF0F
-:1030200010800007000018213082000110400002CB
-:1030300000042042006518211480FFFB0005284091
-:1030400003E000080060102110C00007000000002D
-:103050008CA2000024C6FFFF24A50004AC8200005F
-:1030600014C0FFFB2484000403E0000800000000FB
-:1030700010A0000824A3FFFFAC86000000000000A1
-:10308000000000002402FFFF2463FFFF1462FFFA28
-:103090002484000403E0000800000000308AFFFFE1
-:1030A00093A80013A74A014497490E1630C600FFA3
-:1030B0003C021000A7490146AF450148A346015212
-:1030C000A748015AAF4701608FA400188FA30014CE
-:1030D000A7440158AF43015403E00008AF42017810
-:1030E00003E00008000000003C0380003462007030
-:1030F0008C4900008F8800002484000727BDFFF85A
-:103100003084FFF8AF890030974D008A31ACFFFF63
-:10311000AFAC00008FAB0000016850232547FFFFD4
-:1031200030E61FFF00C4282B14A0FFF73C0C8000E2
-:10313000358B00708D6A00003C0708008CE7008426
-:103140003C0608008CC60080000810820149182344
-:103150000002788000E370210000202101C3C82B09
-:1031600000C4C02101FA4021031948212502400072
-:1031700027BD00083C010800AC2E00843C0108007B
-:10318000AC29008003E00008000000008F820000EE
-:103190002486000730C5FFF800A2182130641FFF05
-:1031A00003E00008AF8400008F8700388F8A00405A
-:1031B00027BDFFB88F860044AFB60040AFBF0044C4
-:1031C000AFB5003CAFB40038AFB30034AFB200309D
-:1031D000AFB1002CAFB000288F4501048D4900AC81
-:1031E000AF4700808CC8002000A938230000B02120
-:1031F000AF480E108F440E1000004821AF440E144B
-:103200008CC20024AF420E188F430E18AF430E1C21
-:1032100010E001252D230001936B0008116000D4FC
-:1032200000000000976E001031CDFFFF00ED602B15
-:10323000158000CF0000000097700010320FFFFFD4
-:10324000AF4F0E008F520000325100081220FFFDD8
-:103250000000000097540E088F460E043285FFFFD1
-:1032600030B3000112600132000000000000000DC8
-:1032700030B8A04024150040131500C030A9A000AC
-:103280001120012D00000000937F000813E00008CA
-:103290000000000097630010306BFFFF00CB402B55
-:1032A0001100000330AC0040118001230000000039
-:1032B000A785003CAF8600349366000800E0282113
-:1032C000AFA7002014C0012427B30020AF60000C7A
-:1032D0009782003C3047400014E0000224030016AF
-:1032E0002403000E24194007A363000AAF790014D9
-:1032F000938A003E8F740014315800070018AA40CA
-:1033000002959025AF7200149784003C8F700014D2
-:103310003091001002117825AF6F0014978E003C99
-:1033200031CD000811A00147000028218F6700144B
-:103330003C0210003C0C810000E22825AF6500141F
-:1033400097460E0A2408000E3405FFFC30C3FFFF29
-:10335000006C5825AF6B0004A3680002937F000A3D
-:1033600027E90004A369000A9786003C9363000ADA
-:1033700030CC1F00000C598301634021251F002819
-:10338000A37F000997490E0CA769001093790009E3
-:10339000272A0002315800070018A82332B100077D
-:1033A000A371000B93740009976400108F9100348F
-:1033B000978F003C329200FF024480210205702169
-:1033C00031ED004011A0000531C4FFFF0091282B12
-:1033D0003C12800010A000140000A0210224382B11
-:1033E00014E0011B8FA500208F4D0E14AF4D0E1061
-:1033F0008F420E1CAF420E18AF440E008F4F0000DC
-:1034000031EE000811C0FFFD0000000097540E08C7
-:103410000080882100009021A794003C8F500E046A
-:1034200024140001AF900034976400103095FFFF22
-:103430008E6800000111F82317E00009AE7F00003C
-:103440008F6500148F8B004434A60040AF660014D3
-:103450008F4C0E10AD6C00208F430E18AD6300240E
-:103460009367000814E000D2000000000E00009EE8
-:10347000240400108F8900483C08320000402821B5
-:10348000312600FF0006FC0003E850252539000125
-:10349000AF990048AC4A0000937800099370000A85
-:1034A000330400FF00047400320F00FF01CF6825D1
-:1034B000AC4D00048F820048064000EAACA2000830
-:1034C000ACA0000C9783003C306B00081560000234
-:1034D0002628000626280002974E0E148F450E1C43
-:1034E0008F670004936D000231C4FFFF31A200FF1B
-:1034F000AFA200108F6C0014AFA800180E00008B54
-:10350000AFAC0014240400100E0000C7000000003F
-:103510008E72000016400005000000008F64001449
-:103520002405FFBF00859824AF7300148F79000C29
-:1035300003353821AF67000C9375000816A000080A
-:103540000000000012800006000000008F7F0014C1
-:103550003C0BEFFF3568FFFE03E84824AF69001419
-:10356000A37400088FA500200A0002460220202133
-:10357000AF470E000A0000F5000000008F590178E7
-:103580000720FFFE241F08008F840000AF5F017832
-:10359000974B008A316AFFFF014448232528FFFF2B
-:1035A00031021FFF2C4300081460FFF900000000E7
-:1035B0008F8E00488F8D003800C0482103442021A1
-:1035C00025C60001240C0F00AF86004800E938230F
-:1035D0002486400031CA00FF11AC00052408000118
-:1035E0009391003E3230000700107A4035E8000128
-:1035F000000AAC003C18010002B8A025AC944000C1
-:103600008F93004830B2003630A40008ACD30004D9
-:103610001080009701123025974E0E0A8F8D000002
-:103620003C02810031CCFFFF25AB00080182402520
-:103630003C03100031651FFF25390006241F000ED2
-:10364000AF48016000C33025A75F015AAF85000075
-:10365000A759015814E0000A8F93003824120F0074
-:10366000527200022416000134C600408F580E101A
-:103670008F940044AE9800208F550E18AE9500240C
-:103680008F450E14AF4501448F590E1CAF590148A8
-:10369000A34A01523C0A1000AF460154AF4A0178D8
-:1036A00014E0FEDD2D2300010076A0251280001716
-:1036B0008FBF00448F84003824160F0010960084BA
-:1036C000000000008F45017804A0FFFE24150F00C4
-:1036D0001095006E000000008F470E142402024077
-:1036E0003C1F1000AF4701448F440E1CAF440148FB
-:1036F000A3400152A740015AAF400160A7400158C2
-:10370000AF420154AF5F01788FBF00448FB60040D5
-:103710008FB5003C8FB400388FB300348FB20030C7
-:103720008FB1002C8FB0002803E0000827BD0048AF
-:1037300014C0FED030B8A0408F420E148F840044D5
-:1037400000004821AC8200208F510E1CAC91002457
-:103750000A00020E2D2300018F910034978A003C4D
-:103760003C1280000220A821315800401700FF3091
-:103770000000A021976900108F9200343139FFFFBB
-:103780001332003500002021008048211480FEA063
-:1037900000A038218F420E148F840044AC82002098
-:1037A0008F510E1CAC9100240A00020E2D23000143
-:1037B000936A00099378000B315000FF330F00FF2C
-:1037C000020F702125C2000A3050FFFF0E00009E3C
-:1037D000020020218F8600483C1F410024CD0001BB
-:1037E000AF8D0048936C000930C600FF000644000E
-:1037F000318300FF246B0002010B4825013FC825DF
-:10380000AC5900008F67000C97440E1400F2282575
-:10381000AC4500048F450E1C8F670004936A0002BC
-:103820003084FFFF315800FFAFB800108F6F0014D5
-:10383000AFB100180E00008BAFAF00140A0001A654
-:1038400002002021AF6000040A00013EA3600002D4
-:103850000A00024600002021000090210A000170A9
-:10386000241400013C1280000A000195ACB2000C47
-:103870008F91000025240002A7440158263000083B
-:10388000320F1FFF0A0001F9AF8F0000AF40014C5B
-:103890001120002C000000008F590E10AF59014478
-:1038A0008F430E18240200403C1F1000AF43014814
-:1038B000A3400152A740015AAF400160A740015800
-:1038C000AF420154AF5F01780A0002278FBF004466
-:1038D000112000060000000097460E0830CC004082
-:1038E00015800002000000000000000D8F4D0178DF
-:1038F00005A0FFFE0000000097530E103C120500CB
-:10390000240E2000326AFFFF0152C025AF58014C3F
-:103910008F4F0E143C021000AF4F01448F500E1C0D
-:10392000AF500148A34001528F840038A740015A8C
-:10393000AF400160A7400158AF4E01540A00021584
-:10394000AF4201788F490E14AF4901448F430E1CDA
-:103950000A00028E240200403C0E20FF27BDFFE03B
-:103960003C1A80003C0F800835CDFFFDAFBF001C26
-:10397000AFB20018AFB10014AFB00010AF8F00406D
-:10398000AF4D0E000000000000000000000000002D
-:1039900000000000000000003C0C00FF358BFFFD24
-:1039A000AF4B0E003C0660048CC95000240AFF7F18
-:1039B0003C116000012A40243507380CACC7500088
-:1039C0008E24043824050009AF4500083083FFFF2A
-:1039D00038622F712450C0B3AF8000480E000068D9
-:1039E000AF80000052000001AE20442C0E000435D0
-:1039F0003C1180000E000ED9363000708F8A0040D6
-:103A00003C12080026523C88020088218E080000E3
-:103A10008F5F00003BF900013338000113000017ED
-:103A2000AF880030022048218D2700003C0F08009D
-:103A30008DEF006C3C0C08008D8C006800E8C02302
-:103A400001F828210000682100B8302B018D582191
-:103A5000016640213C010800AC25006C3C010800D7
-:103A6000AC2800688F4400003883000130620001F8
-:103A70001440FFED00E04021AF8700308E0C0000C5
-:103A80003C0508008CA5006C3C0408008C84006890
-:103A90000188302300A638210000102100E6402BC9
-:103AA000008218210068F8213C010800AC27006C56
-:103AB0003C010800AC3F00688F490100255900888F
-:103AC000AF990044AF890038AF4900208E0700004D
-:103AD000AF8700308F4D017805A0FFFE0000000089
-:103AE0008E0600003C0B08008D6B00743C0408003F
-:103AF0008C84007000C728230165F8210000102184
-:103B000003E5402B0082382100E8C8212409080081
-:103B10003C010800AC3F00743C010800AC39007067
-:103B2000AF49017893580108A398003E938F003E57
-:103B300031EE000115C000158F830038240E0D00F2
-:103B4000106E0019240F0F00106F001D0000000000
-:103B50009159000024180050332900FF1138000447
-:103B60003C1F4000AF5F01380A0002E70000000080
-:103B70000E00090E000000008F8A00403C1F40002C
-:103B8000AF5F01380A0002E700000000938D003E9D
-:103B900031AC0006000C51000E0000CE0152D821BD
-:103BA0000A0003438F8A00403C1B0800277B3D0826
-:103BB0000E0000CE000000000A0003438F8A004080
-:103BC0003C1B0800277B3D280E0000CE00000000B3
-:103BD0000A0003438F8A004090AA00018FAB0010B7
-:103BE0008CAC00103C0300FF8D680004AD6C00201D
-:103BF0008CAD001400E060213462FFFFAD6D002445
-:103C00008CA700183C09FF000109C024AD670028FB
-:103C10008CAE001C0182C82403197825AD6F000406
-:103C2000AD6E002C8CAD0008314A00FFAD6D001C5C
-:103C300094A900023128FFFFAD68001090A7000092
-:103C4000A5600002A1600004A167000090A300022B
-:103C5000306200FF00021982106000052405000197
-:103C60001065000E0000000003E00008A16A0001DA
-:103C70008CD80028354A0080AD7800188CCF00140D
-:103C8000AD6F00148CCE0030AD6E00088CC4002CDB
-:103C9000A16A000103E00008AD64000C8CCD001C9B
-:103CA000AD6D00188CC90014AD6900148CC80024D7
-:103CB000AD6800088CC70020AD67000C8CC20014F2
-:103CC0008C8300640043C82B132000070000000011
-:103CD0008CC20014144CFFE400000000354A008040
-:103CE00003E00008A16A00018C8200640A000399C5
-:103CF0000000000090AA000027BDFFF88FA9001C5B
-:103D0000A3AA00008FAE00003C0FFF808FA8001810
-:103D100035E2FFFF8CCD002C01C26024AFAC000067
-:103D2000A120000400E06021A7A000028FB80000DD
-:103D30008D2700040188182100A0582100C05021BF
-:103D4000006D28263C06FF7F3C0F00FF2CAD0001D4
-:103D500035EEFFFF34D9FFFF3C02FF00031930248A
-:103D6000000D1DC0010EC82400E2C02400C3702550
-:103D700003197825AD2E0000AD2F00048D450024D9
-:103D8000AFAE0000AD2500088D4D00202405FFFFDB
-:103D9000AD2D000C956800023107FFFFAD27001024
-:103DA0009166001830C200FF000219C25060000185
-:103DB0008D450034AD2500148D67000827BD00082F
-:103DC000AD27001C8C8B00CCAD2C0028AD20002C26
-:103DD000AD2B0024AD20001803E00008AD2000202A
-:103DE00027BDFFE0AFB20018AFB10014AFB00010B4
-:103DF000AFBF001C9098000000C088213C0D00FF60
-:103E0000330F007FA0CF0000908E000135ACFFFF84
-:103E10003C0AFF00A0CE000194A6001EA2200004D0
-:103E20008CAB00148E29000400A08021016C282492
-:103E3000012A40240080902101052025A6260002A9
-:103E4000AE24000426050020262400080E0000767B
-:103E500024060002924700002605002826240014AC
-:103E600000071E000003160324060004044000039C
-:103E70002403FFFF965900023323FFFF0E00007654
-:103E8000AE230010262400248FBF001C8FB2001820
-:103E90008FB100148FB00010240500030000302102
-:103EA0000A00008027BD002027BDFFD8AFB1001C4D
-:103EB000AFB00018AFBF002090A80000240200019E
-:103EC0008FB0003C3103003F008088211062001455
-:103ED0008FAA0038240B0005506B0016AFAA001003
-:103EE00000A0202100C028210E0003DC02003021A8
-:103EF000922400BC308300021060000326060030CC
-:103F0000ACC0000024C600048FBF00208FB1001C8D
-:103F10008FB0001800C0102103E0000827BD002862
-:103F2000014038210E00035AAFB000100A000420EF
-:103F3000000000000E0003A1AFB000140A0004202E
-:103F4000000000003C02000A034218213C04080063
-:103F500024843D6C2405001A000030210A000080F2
-:103F6000AF8300543C038000346200708C48000032
-:103F700000A0582100C04821308A00FFAF880030DF
-:103F80008F4401780480FFFE3C0C80003586007071
-:103F90008CC500003C0308008C6300743C180800CA
-:103FA0008F18007000A82023006468210000C82139
-:103FB00001A4782B0319702101CF60213C01080076
-:103FC000AC2D00743C010800AC2C00708F480E141E
-:103FD000AF480144AF47014CA34A0152A74B0158D7
-:103FE0009346010830C5000854A00001352910008F
-:103FF000934B090024070050316A00FF1147000766
-:10400000000000008F450E1CAF450148AF49015428
-:104010003C09100003E00008AF490178934D010806
-:1040200031A800081100001000000000934F0108A3
-:1040300031EE001051C00001352900083C04080091
-:1040400090843DD0A34401508F4309A4AF4301485D
-:104050008F4209A0AF420144AF4901543C0910000E
-:1040600003E00008AF4901783C1908008F393D8C06
-:10407000333800085700FFF1352900080A0004739F
-:104080000000000024070040AF470814AF400810AC
-:104090008F4209448F4309508F4409548F45095C6E
-:1040A0008F46094CAF820064AF830050AF84004C50
-:1040B000AF85005C03E00008AF860060934601090D
-:1040C00030C5007F000518C0000521400083102185
-:1040D00003E00008244200883C09080091293D9132
-:1040E00024A800023C05110000093C0000E830252E
-:1040F00000C5182524820008AC83000003E00008F6
-:10410000AC8000049347010B8F4A002C974F09089D
-:104110003C18000E0358482131EEFFFF000E41C04D
-:10412000AF48002C97430908952C001A00804021C5
-:1041300024030001318BFFFFAC8B00008D2D001C90
-:1041400000A0582100C06021AC8D00048D24002007
-:1041500030E70040AD04000891220019304400030C
-:10416000108300482885000214A000622406000283
-:104170001086005624190003109900660000000004
-:1041800010E0003A000000003C07080094E73D867C
-:1041900024E20001934F0934934709219525002A11
-:1041A00031EE00FF000E488230ED00FF9787005887
-:1041B00000093600000D1C003044FFFF00C310252D
-:1041C0000044C02500A778213C1940000319702540
-:1041D000000F4C00AD090004AD0E0000934D092006
-:1041E0003C03000625090014000D360000C32025FD
-:1041F000AD0400088F59092C24E5000130A27FFF8F
-:10420000AD19000C8F580930A782005825020028EC
-:10421000AD1800108F4F0938AD0F0014AD2B0004FE
-:104220008F4E0940AD2E0008934D09373C0508001C
-:1042300090A53D908F4409488F46094031A700FF63
-:1042400000EC1821008678230003C7000005CC008D
-:104250000319602531E8FFFC01885825AD2B000CBF
-:10426000AD20001003E00008AF4A002C3C0D080010
-:1042700095AD3D863C0E080095CE3D800A0004C9F0
-:1042800001AE10213C05080094A53D8A3C060800BB
-:1042900094C63D803C18080097183D7C952E00245C
-:1042A00000A6782101F86823000E240025A2FFF261
-:1042B0000082182524190800AD03000CAD19001464
-:1042C000AD0000100A0004C425080018952600243B
-:1042D000952500280006C40000057C00370E8100EB
-:1042E00035ED0800AD0E000CAD0D00100A0004C441
-:1042F000250800141480FFA200000000952400246B
-:104300000004140034430800AD03000C0A0004C488
-:10431000250800103C03080094633D8A3C05080012
-:1043200094A53D803C06080094C63D7C9539002448
-:1043300095380028006520210086782300196C003C
-:104340000018740025E2FFEE01C2202535A381008C
-:1043500024190800AD03000CAD040010AD190018BD
-:10436000AD0000140A0004C42508001C03E0000886
-:10437000240201F427BDFFE8AFB00010AFBF001466
-:104380000E0000600080802124050040AF45081425
-:104390008F8300508F84004C8F85005C0070182143
-:1043A0000064102318400004AF830050AF63005432
-:1043B0008F660054AF86004C1200000C0000000015
-:1043C0008F440074936800813409FA002D070007B8
-:1043D00010E0000500891021936C0081240B01F48A
-:1043E000018B500401441021AF62000C8F4E095C18
-:1043F00001C5682319A000048FBF00148F4F095C0A
-:10440000AF8F005C8FBF00148FB000100A000062F5
-:1044100027BD00188F8400648F8300508F82004C6A
-:10442000AF640044AF63005003E00008AF62005483
-:104430003C038000346200708C43000027BDFFF80D
-:10444000308700FF30A900FF30C800FFAF83003085
-:104450008F4401780480FFFE3C02800034590070D4
-:104460008F380000A3A700033C0708008CE7007406
-:104470008FAC00003C0608008CC600700303782354
-:104480003C0E7FFF00EFC82135CDFFFF000050211B
-:10449000018D282400CA1821000847C0032F202BB3
-:1044A00000A810250064C021AFA200003C01080054
-:1044B000AC3900743C010800AC380070934F010A1D
-:1044C000A3A000023C0E80FFA3AF00018FAC000050
-:1044D000312B007F35CDFFFF018D4824000B5600A6
-:1044E000012A4025240730002406FF803C051000E7
-:1044F00027BD0008AF48014CAF470154A740015801
-:10450000A346015203E00008AF45017827BDFFE84C
-:10451000AFBF0014AFB000108F6500743C06800080
-:10452000309000FF00A620250E000060AF640074EC
-:1045300093630005346200080E000062A362000568
-:10454000020020218FBF00148FB000102405000549
-:10455000240600010A00057027BD001827BDFFE0F2
-:104560003C038000AFB00010AFBF0018AFB1001423
-:10457000346200708C470000309000FF30A800FFCC
-:10458000AF8700308F4401780480FFFE3C18800024
-:10459000371100708E2F00003C0D08008DAD0074A7
-:1045A0003C0A08008D4A007001E7702301AE282103
-:1045B0000000582100AE302B014B48210126382144
-:1045C0003C010800AC250074000088213C01080073
-:1045D000AC2700701100000F000000008F62007413
-:1045E0002619FFFF3208007F0002FE0233E5007F3C
-:1045F00015000006332200FF2407FF800207202653
-:1046000024A3FFFF00838025320200FF00408021A9
-:10461000241110080E000060000000008F490818E7
-:104620003125000414A0FFFD3218007F001878C067
-:104630000018714001CF682125AC0088AF4C0818E4
-:10464000274A09808D4B0020AF4B01448D46002442
-:10465000AF460148A35001500E000062A740015828
-:10466000022010218FBF00188FB100148FB00010EE
-:1046700003E0000827BD002027BDFFE8308400FFCD
-:10468000AFBF00100E0005BB30A500FF8F830050A8
-:104690008FBF0010344500402404FF903C021000FE
-:1046A00027BD0018AF43014CA3440152AF4501544C
-:1046B00003E00008AF4201789343093E30620008EE
-:1046C0001040000D3C0901013528080AAC880000A3
-:1046D0008F470074AC8700043C06080090C63D90EC
-:1046E00030C5001050A00006AC8000088F6A006042
-:1046F000AC8A00082484000C03E00008008010212C
-:104700000A0006222484000C27BDFFE8AFBF001476
-:10471000AFB000109346093F00A05021000528804B
-:104720000085382330C200FF240300063C0908003E
-:1047300095293D8624E8FFD824050004104300375E
-:10474000240600029750093C3C0F02040006340086
-:10475000320EFFFF01CF6825AC8D0000934C093E5F
-:10476000318B0020116000080000000093430936DF
-:104770003C020103345F0300307900FF033FC02592
-:1047800024050008AC980004934309349359092187
-:104790000005F882306200FF0002C082332F00FF64
-:1047A00000186E00000F740001AE602501892025FD
-:1047B0003C09400000898025ACF0FFD893430937BD
-:1047C0008F4F09488F580940306200FF004AC821C6
-:1047D000033F702101F86023000E6F0001A65025F1
-:1047E0003185FFFC001F58800145482501683821AC
-:1047F000AD0900200E00006024F00028240400040D
-:104800000E000062A364003F020010218FBF00145D
-:104810008FB0001003E0000827BD00180A0006351D
-:104820002406001227BDFFD024090010AFB60028CF
-:10483000AFB50024AFB40020AFB10014AFB000108A
-:104840003C010800A0293D90AFBF002CAFB3001C75
-:10485000AFB2001897480908309400FF3C02000EE0
-:104860003107FFFF000731C0AF46002C974409080D
-:104870009344010B30B500FF0342802130830030A8
-:104880000000B0211060012500008821240C0004E4
-:104890003C010800A02C3D90934B093E000B5600B4
-:1048A000000A2E0304A0016000000000AF40004891
-:1048B000934F010B31EE002011C0000600000000F4
-:1048C0009358093E00189E00001396030640018984
-:1048D000000000009344010B30830040106000038F
-:1048E0008F9300508F8200502453FFFF9347093E5F
-:1048F00030E6000814C000022412000300009021DA
-:104900009619002C93580934934F0937A7990058EA
-:10491000330C00FF31EE00FF024E6821000D58807D
-:10492000016C5021015140213C010800A4283D8622
-:104930009205001830A900FF010918213C01080068
-:10494000A4233D88921100181620000200000000E8
-:104950000000000D3C010800A4233D8A3C01080032
-:10496000A4203D803C010800A4203D7C935F010B06
-:104970003063FFFF33F00040120000022464000A9D
-:104980002464000B3091FFFF0E00009E02202021C6
-:104990009358010B3C08080095083D8A00402021EF
-:1049A00000185982316700010E00049A010728217E
-:1049B000934C010B8F4B002C974E09083C0F000EB7
-:1049C000034F402131CDFFFF000D51C0AF4A002CF5
-:1049D000974309089505001A004038212404000176
-:1049E00030A9FFFFAC4900008D06001C00404821A3
-:1049F000318A0040AC4600048D020020ACE2000881
-:104A00009103001930630003106400EC2879000260
-:104A100017200118241000021070010C241F00033D
-:104A2000107F011E00000000114000DE00000000A9
-:104A30003C09080095293D8625220001935F093431
-:104A4000934E09219504002A33F900FF0019C08212
-:104A500031CF00FF978E005800184600000F6C0001
-:104A6000010D80253045FFFF02051025008E5021E5
-:104A70003C03400000433025000A6400ACEC000415
-:104A8000ACE60000935F09203C19000624EC0014FA
-:104A9000001FC60003197825ACEF00088F48092CC9
-:104AA00025CD000131A57FFFACE8000C8F50093007
-:104AB000A785005824E80028ACF000108F4409387E
-:104AC00001008021ACE40014AD9300048F53094031
-:104AD000AD930008934A09373C19080093393D907B
-:104AE0008F4309488F460940314200FF0052F821A8
-:104AF00000667023001F7F000019C40001F82825FC
-:104B000031CDFFFC00AD2025AD84000CAD80001040
-:104B1000AF4B002C934B093E317300081260000D1F
-:104B20003C06010134CC080AACEC00288F53007419
-:104B3000AD1300043C0B0800916B3D9031670010F1
-:104B400050E00003AD0000088F6A0060AD0A000865
-:104B50002510000C12C0003D000000009343093FE7
-:104B60002416000624060004306200FF105600C917
-:104B7000240700029758093C3C0F0204330DFFFF45
-:104B800001AF4025AE0800009345093E30A4002047
-:104B90001080000800000000935309363C0B01030D
-:104BA000357F0300327900FF033F7025AE0E00040D
-:104BB00024060008934F093493480921312AFFFF46
-:104BC00031ED00FF000D1082310300FF0002B6003E
-:104BD00000032C0002C56025018A98250012208060
-:104BE0003C0940000204502302695825AD4BFFD810
-:104BF000935F09378F4F09488F58094033F900FFF9
-:104C0000033270210006B08201D6682100074400FB
-:104C100001F82823000D1F000068302530A2FFFC9A
-:104C20002547FFD800C26025001680800207482172
-:104C3000ACEC0020253000280E0000602412000497
-:104C4000A372003F0E000062000000009347010BBA
-:104C500030F20040124000053C1900FF8E180000A1
-:104C6000372EFFFF030E3024AE0600000E0000C7F3
-:104C7000022020213C10080092103D9032110003C8
-:104C80001220000F02A028218F8900502533000137
-:104C9000AF930050AF7300508F6B00540173F82333
-:104CA0001BE00002026020218F640054AF640054B6
-:104CB0008F4C0074258401F4AF64000C02A02821FD
-:104CC00002802021A76000680E0005BB3C14100084
-:104CD0008F85005034550006AF45014C8F8A00483F
-:104CE0008FBF002C8FB3001C25560001AF960048E3
-:104CF0008FB20018A34A01528FB60028AF55015455
-:104D00008FB10014AF5401788FB500248FB4002008
-:104D10008FB0001003E0000827BD00309358093E13
-:104D200000189E000013960306420036241100026C
-:104D300093440923308300021060FEDD8F860060FB
-:104D40008F82005014C2FEDA000000000E000060E6
-:104D5000000000009369003F24070016312800FF7F
-:104D60001107000C240500083C0C0800918C3D90B4
-:104D7000358B00013C010800A02B3D90936A003F59
-:104D8000314300FF10650065240D000A106D005EC0
-:104D90002402000C0E000062000000000A000690D1
-:104DA000000000003C09080095293D863C0A0800E7
-:104DB000954A3D800A0006F3012A10213C090800AB
-:104DC00095293D8A3C04080094843D803C060800F7
-:104DD00094C63D7C95030024012410210046F8234D
-:104DE0000003CC0027F0FFF20330C025240F080099
-:104DF000ACF8000CACEF0014ACE000100A0006EEBA
-:104E000024E700183C010800A0313D90935F093E63
-:104E10002416000133F900201720FEA524110008F4
-:104E20000A000690241100048F6E00848F4D094003
-:104E300011A0FE9EAF8E0050240F00143C0108000C
-:104E4000A02F3D900A00068F00000000950E002460
-:104E5000950D0028000E6400000D2C00358981009E
-:104E600034A60800ACE9000CACE600100A0006EE1F
-:104E700024E700141460FEEC0000000095020024FA
-:104E800000021C0034640800ACE4000C0A0006EECA
-:104E900024E700100A000741240700123C02080022
-:104EA00094423D8A3C06080094C63D803C030800BD
-:104EB00094633D7C95100024951900280046F82144
-:104EC00003E3C02300106C0000197400270FFFEEED
-:104ED00001CF282535AC8100ACEC000CACE500100E
-:104EE00024070800AD2700182527001C0A0006EE3D
-:104EF000AD2000148F7F004CAF7F00548F79005499
-:104F00000A000699AF790050A362003F0E000062CC
-:104F1000000000000A0006900000000024020014B7
-:104F20000A000827A362003F27BDFFE8308400FF86
-:104F3000AFBF00100E0005BB30A500FF9378007EC8
-:104F40009379007F936E00809368007A332F00FF7F
-:104F500000186600000F6C0031CB00FF018D482562
-:104F6000000B52008FBF0010012A3825310600FFC8
-:104F70003444700000E628252402FF813C03100021
-:104F800027BD0018AF45014CAF440154A342015264
-:104F900003E00008AF43017827BDFFD8AFB2001887
-:104FA000AFB10014AFB00010AFBF0020AFB3001C12
-:104FB00093420109308600FF30B000FF000618C29E
-:104FC000320400023071000114800005305200FFED
-:104FD0009367000530E5000810A0000D30C80010F0
-:104FE000024020210E0005A70220282124040001F0
-:104FF0008FBF00208FB3001C8FB200188FB1001438
-:105000008FB000100080102103E0000827BD0028A9
-:105010001500003200000000934301090000282120
-:105020003062007F000220C00002F94003E49821B2
-:1050300026790088033B98218E7800248E6F000823
-:10504000130F0046000000008F6400842418000243
-:105050000004FD8233F900031338007C00000000D7
-:1050600093660083934A0109514600043205007C8F
-:1050700010A00060000000003205007C14A0005366
-:105080000240202116200006320400018E7F0024F9
-:105090008F59010417F9FFD60000202132040001C6
-:1050A0001080000A024020218F4209408F93006443
-:1050B00010530006000000000E00066D022028219B
-:1050C0008F430940AF630044024020210E000602D6
-:1050D000022028210A000860240400013C0908007D
-:1050E0008D290064252600013C010800AC260064DF
-:1050F00016000012000000008F6D00843C0E00C0FE
-:1051000001AE602415800005024020210E00082E0B
-:10511000022028210A00086024040001240500045C
-:105120000E00057024060001024020210E00082E0A
-:10513000022028210A000860240400010E0000411A
-:1051400024040001936B007D020B50250E000062C9
-:10515000A36A007D0A0008A38F6D00848F66007427
-:105160008F4801048E67002400064E021507FFB623
-:105170003126007F936B008326440001308A007F34
-:1051800011460043316300FF5464FFB08F64008414
-:105190002645000130B1007F30A200FF1226000436
-:1051A00024050001004090210A0008762411000126
-:1051B000240FFF80024F702401CF9026324200FF5F
-:1051C000004090210A000876241100010E00066DAF
-:1051D00002202821321800301300FFAA321000826A
-:1051E000024020210E0005A7022028210A000860A5
-:1051F000240400018F6E00743C0F8000240500031E
-:1052000001CF9025AF7200749371008324060001D2
-:105210000E000570322400FF0E000041240400013E
-:10522000936D007D020D60250E000062A36C007D71
-:105230003C0B08008D6B0054257000013C010800F8
-:10524000AC3000540A000860240400018F68007428
-:105250003C0980002405000401093825AF6700746B
-:1052600093630083240600010E000570306400FF84
-:105270000E000041240400019362007D0202982583
-:105280000E000062A373007D0A0008602404000180
-:10529000324D008039AC0080546CFF6C8F64008408
-:1052A0000A0008C92645000127BDFFC83C0A0008BE
-:1052B000AFBF0030AFB5002CAFB40028AFB30024AF
-:1052C000AFB20020AFB1001CAFB00018034AD82124
-:1052D00024090040AF490814AF4008108F42094428
-:1052E0008F4309508F4609548F47095C8F48094CFA
-:1052F000934401089345010BAF820064308400FFA2
-:1053000030A500FFAF830050AF86004CAF87005C34
-:105310000E00084AAF8800601440017D8FBF003046
-:10532000A7600068934D0900240B00503C1508004D
-:1053300026B53D4831AC00FF3C12080026523D58CE
-:10534000118B0003000000000000A8210000902144
-:10535000935101098F9F005024040010322E007FCA
-:10536000000E68C0000E6140018D282124B4008821
-:10537000AF5408188F4901048F4A09A43C0B000E52
-:10538000034BC021012A10233C010800AC223D6CD4
-:105390008F4309583C010800A0243D909747090815
-:1053A000007F30233C010800AC263D7030E8FFFF51
-:1053B0000008C9C03C010800AC3F3D94AF59002C27
-:1053C000974209089710002C8EB10000930F001827
-:1053D00003749821A7900058AF9300440220F80965
-:1053E00031F000FF304E000215C001B2304F000115
-:1053F00011E0014F000000009343093E30660008B1
-:1054000014C00002241400030000A0218F5809A436
-:10541000241300013C010800AC383D98934F093437
-:105420009351093731EC00FF322E00FF028E6821C4
-:10543000000D288000AC5021015058213C0108008B
-:10544000A42B3D883C010800A42A3D8693490934D9
-:10545000312200FF02022021249000103C010800AC
-:10546000A4303D84240700068F9F00503C010800B3
-:10547000AC273D8C8F88005C8F5909580000802133
-:10548000011F282304A00149033F20230480014772
-:1054900000A4302B10C00149000000003C010800AE
-:1054A000AC253D708E4200000040F809000000006D
-:1054B00030430002146000F80040882130440001AD
-:1054C000548000108E4200043C0908008D293D7470
-:1054D0003C0AC000012A8025AF500E008F45000015
-:1054E00030AB00081160FFFD00000000974D0E0872
-:1054F00024100001A78D003C8F4C0E04AF8C0034AB
-:105500008E4200040040F8090000000002228825B5
-:10551000322E000215C00180000000003C09080086
-:1055200095293D7C3C06080094C63D883C0A08004D
-:10553000954A3D7E3C1908008F393D740126602153
-:105540003C1808008F183D983C03080094633D9276
-:10555000018A20218F4E09400329F821248F00025F
-:1055600003E32821031968213C010800A42C3D8A8B
-:10557000AF8E00643C010800AC2D3D983C01080052
-:10558000A4253D800E00009E31E4FFFF8F87004878
-:10559000004020213C010800A0273D918E420008D8
-:1055A00024E80001AF8800480040F809000000002E
-:1055B0009344010B8F4C002C974A09083C0B000EBA
-:1055C000034B40213149FFFF000919C08F8B005068
-:1055D000AF43002C974309089506001A0040382174
-:1055E000308A004030DFFFFFAC5F00008D19001CE7
-:1055F00000404821AC5900048D180020AC58000828
-:10560000910F001931E30003107300F00000000057
-:10561000286200021440010924050002106500FD03
-:10562000240D0003106D010D00000000114000D991
-:10563000000000003C0A0800954A3D862542000112
-:10564000934D093493580921950E002A31A300FF88
-:1056500000032082331F00FF9798005800047E004B
-:10566000001FCC0001F940253049FFFF010910253A
-:1056700001D830213C0540000045502500066C0053
-:10568000ACED0004ACEA0000934309203C040006A2
-:1056900024ED00140003FE0003E4C825ACF9000863
-:1056A0008F49092C270F000131EE7FFFACE9000C78
-:1056B0008F480930A78E005824E90028ACE8001074
-:1056C0008F45093801204021ACE50014ADAB000442
-:1056D0008F420940ADA20008934B09373C1F0800D8
-:1056E00093FF3D908F4309488F4A0940316600FF80
-:1056F00000D42021006A78230004C700001FCC00DA
-:105700000319282531EEFFFC00AE1025ADA2000CD8
-:10571000ADA00010AF4C002C934C093E318B00081B
-:105720005160000F8E58000C3C06010134CA080A73
-:10573000ACEA00288F4B0074AD2B00043C0C080031
-:10574000918C3D903187001050E00003AD2000089F
-:105750008F620060AD2200082528000C8E58000CD6
-:105760000300F809010020213C19080097393D8AFF
-:105770003C1F080097FF3D7E033F782125E900028A
-:105780000E0000C73124FFFF3C0E08008DCE3D6C9B
-:105790003C0808008D083D7401C828233C0108001E
-:1057A000AC253D6C14A00006000000003C0308007E
-:1057B0008C633D8C346400403C010800AC243D8C7B
-:1057C000120000708F8C00448F470E108F900044A1
-:1057D000AE0700208F4D0E18AE0D00243C100800BF
-:1057E00096103D800E000060000000002402004082
-:1057F000AF4208148F8600508F8A004C00D01821C9
-:10580000006A582319600004AF830050AF6300544E
-:105810008F650054AF85004C1200000C00000000A2
-:105820008F440074936800813409FA002D0E00073C
-:1058300011C0000500891821937F0081241901F40B
-:1058400003F9780401E41821AF63000C8F44095C6C
-:105850008F83005C0083C0231B0000030000000056
-:105860008F50095CAF90005C0E00006200000000E9
-:105870008F8C00508E4700103C010800AC2C3D94EA
-:1058800000E0F809000000003C0D08008DAD3D6C03
-:1058900055A0FEF5240700068F45002497590908F6
-:1058A0008F8B00648F9400503C0F001F978200582C
-:1058B0008F8600548F93004C3328FFFF35E9FF801B
-:1058C00000A95024000871C032320100AF4E0024FC
-:1058D000A4C2002CAF4A0024AF6B0044AF74005048
-:1058E000AF73005416400080323800105700008615
-:1058F0008EA40004322300405460001B8EB10008C7
-:105900008EB0000C0200F809000000008FBF0030CC
-:105910008FB5002C8FB400288FB300248FB20020E5
-:105920008FB1001C8FB0001803E0000827BD0038BD
-:10593000934701098F8800380007FE0003E8C82557
-:10594000AF5900808F5809A08F5309A4AFB8001039
-:10595000AF580E148FB40010AF540E10AF530E1C7E
-:105960000A000962AF530E180220F8090000000077
-:105970008EB0000C0200F809000000000A000AA81E
-:105980008FBF0030A5800020A59300220A000A5B8B
-:10599000AD9300243C09080095293D863C0608008B
-:1059A00094C63D800A0009F4012610213C0108003C
-:1059B000AC203D700A00098E8E4200003C010800B8
-:1059C000AC243D700A00098E8E4200003C030800A2
-:1059D00094633D8A3C04080094843D803C1F080089
-:1059E00097FF3D7C951800240064C821033F78236D
-:1059F00000186C0025EEFFF201AE2825AC45000C26
-:105A000024020800ACE20014ACE000100A0009EF28
-:105A100024E70018950600249509002800062400B4
-:105A200000091C00349F810034790800ACFF000C91
-:105A3000ACF900100A0009EF24E700141460FEFB23
-:105A4000000000009518002400187C0035EE0800C6
-:105A5000ACEE000C0A0009EF24E700103C07080038
-:105A600094E73D803C04080094843D8A3C03080090
-:105A700094633D7C95190024951800280087F8212F
-:105A800003E378232407080000192C0000186C0099
-:105A900025EEFFEE01AE302534A28100AD270018BF
-:105AA0002527001CAD22000CAD2600100A0009EFCE
-:105AB000AD20001493520109000028210E000602B7
-:105AC000324400FF8FBF00308FB5002C8FB4002808
-:105AD0008FB300248FB200208FB1001C8FB000184C
-:105AE00003E0000827BD0038935F010933E400FF9D
-:105AF0000E00066D00002821323800105300FF7E92
-:105B0000322300408EA400040080F8090000000049
-:105B10000A000AA2322300401200FF5F00000000CA
-:105B20008F540E148F920044AE5400208F530E1CDD
-:105B30000A000A8AAE5300248F82001C0080402194
-:105B40003C0401009047008530E30020106000090C
-:105B5000000000003C0708008CE73D948F8300188C
-:105B600000E32023048000089389000414E3000369
-:105B70000100202103E00008008010213C04010006
-:105B800003E00008008010211120000B006738237B
-:105B90008F8C002024090034918B00BC316A0002F4
-:105BA000514000012409003000E9682B15A0FFF1E5
-:105BB0000100202100E938232419FFFC00B9C0248A
-:105BC00000F9782400F8702B15C0FFEA01E82021C5
-:105BD00030C200030002182314C000123069000311
-:105BE0000000302100A9702101C6682100ED602B62
-:105BF0001180FFE03C0401002D2F00010006482B1E
-:105C00000105382101E9302414C0FFDA24E4FFFC47
-:105C10002419FFFC00B9C0240308202103E0000878
-:105C2000008010218F8B002024060004916A00BCA4
-:105C3000314400041480FFEC00A970210A000B5EBF
-:105C40000000302127BDFFE8AFBF00108F460100E4
-:105C5000934A01093C1F08008FFF00902407FF8032
-:105C6000314F00FF31E8007F0008614003E6C821A2
-:105C7000032CC02127090120012770243C010800C2
-:105C8000A02F3DD0AF4E080C3C0D08008DAD00900C
-:105C90003C0400803482000301A65821016C1821C5
-:105CA0002465012030AA007801424025AF48081C35
-:105CB0003C1F08008FFF00908F88004003E6C02142
-:105CC0003319000703074824033A7821AF49002815
-:105CD00025E909C0952E00023C0D08008DAD008C11
-:105CE0003C0A08008D4A009031CC3FFF01A61821E4
-:105CF000000C5980006B282100A72024AF44002C01
-:105D0000952200023C1F08008FFF008C9107008540
-:105D100030593FFF03E678210019C1800146702108
-:105D200001F8682131CC007F31AB007F019A282136
-:105D3000017A50213C03000C3C04000E00A32821F2
-:105D40000144102130E6002027470980AF82002C53
-:105D5000AF88001CAF890024AF85002010C000066A
-:105D6000AF8700288D0200508CA4010C0044302322
-:105D700018C0007700000000910C0085240DFFDFA3
-:105D8000018D3824A10700858F8B001C8F8900248A
-:105D90008F8700288D65004CAF850018912F000D6E
-:105DA00031EE002011C0001700000000240900019E
-:105DB000A3890004AF80000C8CE400248F85000CC4
-:105DC000240A0008AF800008AF8000103C010800E2
-:105DD000A42A3D7E3C010800A4203D920E000B3217
-:105DE000000030218F8500248FBF0010AF82001487
-:105DF00090A8000D27BD00180008394203E00008F4
-:105E000030E20001913F00022418000133F900FF45
-:105E10000019218210980039240800021088005BC4
-:105E20008F86002C8CE5002414A0001B8F9F00207F
-:105E300091220000240A00053046003F10CA0047A6
-:105E4000240400018F860008A3840004AF8600109C
-:105E5000AF86000C8CE400248F85000C240A000817
-:105E60003C010800A42A3D7E3C010800A4203D928C
-:105E70000E000B32000000008F8500248FBF001041
-:105E8000AF82001490A8000D27BD00180008394209
-:105E900003E0000830E200018CF800088CF90024CF
-:105EA0008FEE00C4A38000048CE40024AF8E000CAD
-:105EB0008F85000C8F86000803197823240A0008B8
-:105EC000AF8F00103C010800A42A3D7E3C01080071
-:105ED000A4203D920E000B32000000008F850024AC
-:105EE0008FBF0010AF82001490A8000D27BD0018CE
-:105EF0000008394203E0000830E20001912300006D
-:105F00003062003F104400278F8500208CE400247D
-:105F100014800021000000008D2E00183C187FFF27
-:105F20008F850020370FFFFF01CF1824AF830008B3
-:105F30008F9F00088CA8008403E8C82B172000025C
-:105F400003E020218CA400840A000BEDAF8400083C
-:105F50008CA3010C0A000BCBAF8300188D2C00180A
-:105F60008F8600083C0D7FFF8F89002035A3FFFF3F
-:105F70000183582424040001AF8B0010AD2000CC15
-:105F8000A38400040A000BF9AF86000C8CCA00142D
-:105F90000A000BEDAF8A00088CA300C80A000C3081
-:105FA000AF8300088F84002C8CAC00648C8D0014AF
-:105FB000018D582B11600004000000008CA20064C9
-:105FC0000A000C30AF8200088C8200140A000C30EA
-:105FD000AF8200088F85000C27BDFFE0AFBF00181F
-:105FE000AFB1001414A00007AFB000108F860024DA
-:105FF0002402000590C400003083003F106200B608
-:106000008F8400208F91000800A080218F8C0028B1
-:106010003C0508008CA53D708D8B000431663FFF68
-:1060200000C5502B5540000100C02821938D00046D
-:1060300011A0007300B0F82B8F98002024040034C6
-:10604000930F00BC31EE000251C000012404003067
-:1060500000A4C82B172000D10000000000A42823B2
-:1060600000B0F82B3C010800A4243D7C17E0006838
-:10607000020020213C0308008C633D6C0083102B40
-:1060800054400001008018218F8800243C01080042
-:10609000AC233D74000048219104000D30830020A2
-:1060A000506000018F490E188F8300140123382B94
-:1060B00010E00059000000003C0408008C843D748E
-:1060C00000895821006B502B114000560090602B26
-:1060D0000069302300C020213C010800AC263D743B
-:1060E00012000003241FFFFC1090008A32270003D7
-:1060F000009FC8243C010800AC393D743C010800F5
-:10610000A4203D928F84000C120400078F8300208E
-:10611000AF910008020020218C7100CCAF90000CE0
-:1061200026300001AC7000CC3C0208008C423D746B
-:106130008F8A0010240700180082202301422823A0
-:10614000AF84000C10800002AF85001024070010FF
-:106150008F86001C3C010800A0273D9024070040CA
-:1061600090CC0085318B00C0116700408F8D0014EA
-:1061700014A0001500002021934A01098F420974E0
-:10618000314500FF0002260224A300013090007F69
-:106190003071007F1230007A2407FF80A0C3008393
-:1061A0003C0908008D293D8C8F880024240D0002B5
-:1061B000352C00083C010800A02D3DD13C01080011
-:1061C000AC2C3D8C24040010910E000D31C6002033
-:1061D00010C0000500801821240800013C010800BF
-:1061E000AC283D74348300018FBF00188FB10014B8
-:1061F0008FB000100060102103E0000827BD0020D0
-:106200003C010800A4203D7C13E0FF9A02002021FD
-:106210000A000C8100A020213C0408008C843D74FD
-:106220000090602B1180FFAE000000003C0F0800C2
-:1062300095EF3D7C01E4702101C6682B11A0000799
-:106240002C8200043C1F60008FF954043338003F57
-:106250001700FFE5240300422C8200041040FFA039
-:10626000240300420A000CDF8FBF0018152DFFC069
-:10627000000000008CDF00743C0380002405FF80D8
-:1062800003E3C825ACD9007490D80085240E00041F
-:1062900024040010330F003F01E54025A0C800850D
-:1062A0008F8800243C010800A02E3DD1240300016A
-:1062B0009106000D30C900201520000300000000E9
-:1062C0003C0308008C633D743C010800AC233D6C2A
-:1062D0000A000CD6000000008F8700108C88008414
-:1062E00000E8282B14A0000200E088218C91008493
-:1062F00024090001A38900048F440E1802202821DC
-:106300000E000B3202203021022080210A000C678F
-:10631000AF82001400071823306600033C01080018
-:10632000A4263D92122000058F8C0020918B00BC8A
-:10633000316A00041540001524CD00043C0F08000C
-:1063400095EF3D9201E4702100AE302B50C0FF6EFE
-:106350008F84000C2C85000514A0FFA324030042A9
-:106360003098000317000002009818232483FFFCD4
-:106370003C010800AC233D740A000CA3000000009F
-:1063800000A758240A000CCB016718263C0108001E
-:10639000A42D3D920A000D33000000003C010800CE
-:1063A000AC203D740A000CDE240300428F830010F1
-:1063B00014600007000010218F88002424050005C8
-:1063C0009106000030C400FF1085000300000000AB
-:1063D00003E0000800000000910A0018314900FFA6
-:1063E000000939C214E0FFFA8F85001C3C04080044
-:1063F00094843D7C3C0308008C633D943C19080068
-:106400008F393D743C0F080095EF3D920064C02128
-:106410008CAD00540319702101CF6021018D5823E8
-:106420001960001D00000000910E001C8F8C002CD4
-:10643000974B0E1031CD00FF8D850004016D302388
-:106440008D88000030CEFFFF000E510000AAC82149
-:106450000000382101072021032A182B0083C021C6
-:10646000AD990004AD980000918F000A01CF68211A
-:10647000A18D000A8F88002C974B0E12A50B0008E7
-:10648000950A003825490001A50900389107000D3B
-:1064900034E60008A106000D03E00008000000003B
-:1064A00027BDFFE0938700048F8F00248FAD001479
-:1064B0003C0E7FFF8F89000C35C8FFFFAFBF001C6B
-:1064C000AFB0001801A8182491EA000D000717C00A
-:1064D0003C1FBFFF006258252D2E00018F90001831
-:1064E00037F9FFFF3C1808008F183D943C0F080057
-:1064F00095EF3D8A01796824000E47803C07EFFF45
-:106500003C05F0FF01A818253149002034E2FFFFC7
-:1065100034ACFFFF0310582327A500102406000207
-:1065200025EA000200621824008080211520000264
-:10653000000040218F480E1CA7AA001205600037FA
-:106540002407000030FF00FF001FCF008F8B001CCE
-:1065500000793825AFA70014916F00853C0808002A
-:1065600091083D913C18DFFF31EE00C0370AFFFF74
-:10657000000E182B3C1F080097FF3D8400EA68249A
-:10658000A3A800110003174001A248258FB90010ED
-:10659000AFA900143C0A0800914A3D93A7BF00161A
-:1065A0008FA80014032CC0243C0B01003C0F0FFFEC
-:1065B000030B18253147000335EEFFFF010C68245B
-:1065C00000071600006EF8243C09700001A2C825DF
-:1065D00003E95825AFB90014AFAB00100E000076E8
-:1065E000A3A000158F8C0024260200089186000DC0
-:1065F00030C40020108000068FBF001C3C0508003E
-:1066000094A53D8024B0FFFF3C010800A4303D80EC
-:106610008FB0001803E0000827BD00208F980014F9
-:106620000118502B5540FFC7240700010A000DB682
-:1066300030FF00FF9382000427BDFFE0AFBF0018CA
-:106640001040000F008050218F880024240B00058B
-:106650008F890008910700008F8400200100282105
-:1066600030E3003F8F86002C106B000800003821BB
-:10667000AFA900100E00040EAFAA0014A3800004FE
-:106680008FBF001803E0000827BD00208D190018F7
-:106690003C0F08008DEF3D748F9800103C027FFF87
-:1066A0008D080014345FFFFF033F682401F8702158
-:1066B00001AE602301883821AFA900100E00040E3E
-:1066C000AFAA00140A000E04A38000048F870024E0
-:1066D0003C05080094A53D923C0208008C423D8C8C
-:1066E00090E6000D0005240030C300201060002C4F
-:1066F000004440258F85001C00006021240B000110
-:1067000090A3008500004821240A00013C0F80006E
-:1067100035EE00708DC70000AF8700308F580178CC
-:106720000700FFFE3C038000347900708F380000C2
-:106730003C0508008CA500743C0D08008DAD007070
-:106740000307782300AF38210000102100EF302B21
-:1067500001A22021008618213C010800AC2700740A
-:106760003C010800AC230070AF4B01483C19080005
-:106770008F393D94A7490144A74A0146AF59014CBE
-:106780003C0B0800916B3D91A34B0152AF48015463
-:106790003C081000A74C015803E00008AF480178FE
-:1067A0008F4B0E1C3C0A08008D4A3D7497490E160B
-:1067B000974D0E1401456021312AFFFF0A000E2774
-:1067C00031A9FFFF8F8300249064000D30820020E8
-:1067D0001040002900000000000048210000502166
-:1067E000000040213C07800034EB00708D67000002
-:1067F000AF8700308F4C01780580FFFE3C0D800094
-:1068000035AC00708D8B00003C0508008CA5007431
-:106810003C0408008C8400700167302300A67821B6
-:106820000000102101E6C82B0082C021031970214D
-:106830003C010800AC2F00743C010800AC2E007035
-:10684000AF4901483C0D08008DAD3D94A748014477
-:1068500024090040A74A01463C081000240AFF9181
-:10686000AF4D014CA34A0152AF490154A740015812
-:1068700003E00008AF4801788F490E1897460E12C2
-:1068800097450E1030CAFFFF0A000E5D30A8FFFFCB
-:106890008F83002427BDFFF89064000D3082002014
-:1068A0001040003A00000000240B000100004821C5
-:1068B000240A00013C088000350700708CE30000CA
-:1068C000AF8300308F4C01780580FFFE3C0E8000C6
-:1068D0003C04080090843DD035C700708CEC00006B
-:1068E0003C0508008CA50074A3A400033C19080013
-:1068F0008F3900708FAD00000183302300A638214E
-:10690000000010210322782100E6C02B01F860214D
-:1069100001AE4025AFA800003C010800AC27007480
-:106920003C010800AC2C00709346010A3C040800AE
-:1069300090843DD1A3A00002A3A600018FA3000074
-:106940003C0580FF3099007F34A2FFFF006278246D
-:106950000019C60001F87025240D3000AF4E014C1F
-:1069600027BD0008AF4D0154A7400158AF4B014867
-:10697000A7490144A74A01463C091000240AFF80A8
-:10698000A34A015203E00008AF4901788F4B0E186B
-:1069900097460E1297450E1030CAFFFF0A000E915F
-:1069A00030A9FFFF8F85001C2402008090A4008581
-:1069B000308300C0106200058F8600208F88000899
-:1069C0008F87000CACC800C8ACC700C403E0000847
-:1069D000000000003C0A0800254A39543C09080020
-:1069E00025293A203C08080025082DD43C0708003A
-:1069F00024E73B343C06080024C637C43C050800A5
-:106A000024A5353C3C040800248431643C03080080
-:106A10002463385C3C020800244236303C01080004
-:106A2000AC2A3D503C010800AC293D4C3C0108001B
-:106A3000AC283D483C010800AC273D543C0108000F
-:106A4000AC263D643C010800AC253D5C3C010800DF
-:106A5000AC243D583C010800AC233D683C010800D3
-:0C6A6000AC223D6003E0000800000000D4
+:102F000000000000000000000000000000000000C1
+:102F1000000000000000138800000000000005DC35
+:102F2000000000000000000010000003000000008E
+:102F30000000000D0000000D3C02080024423C206F
+:102F40003C03080024633DD4AC4000000043202B28
+:102F50001480FFFD244200043C1D080037BD7FFCA7
+:102F600003A0F0213C100800261000A83C1C08001B
+:102F7000279C3C200E0002BA000000000000000D5B
+:102F80008F8300383C088000350700708CE5000016
+:102F9000008330253C02900000C22025AF85003020
+:102FA000AF4400208F4900200520FFFE3C03800035
+:102FB000346200708C4500008F8600303C19080098
+:102FC0008F39007C3C0E08008DCE007800A62023AF
+:102FD00003245821000078210164682B01CF60216F
+:102FE000018D50213C010800AC2B007C3C01080005
+:102FF000AC2A007803E00008000000000A0000414D
+:10300000240400018F8400383C05800034A20001B4
+:103010000082182503E00008AF43002003E0000809
+:10302000000010213084FFFF30A5FFFF1080000753
+:1030300000001821308200011040000200042042EC
+:10304000006518211480FFFB0005284003E00008FC
+:103050000060102110C00007000000008CA20000DA
+:1030600024C6FFFF24A50004AC82000014C0FFFBAF
+:103070002484000403E000080000000010A0000801
+:1030800024A3FFFFAC860000000000000000000049
+:103090002402FFFF2463FFFF1462FFFA248400046C
+:1030A00003E0000800000000308AFFFF93A800132F
+:1030B000A74A014497490E1630C600FF3C02100093
+:1030C000A7490146AF450148A3460152A748015A06
+:1030D000AF4701608FA400188FA30014A7440158C4
+:1030E000AF43015403E00008AF42017803E0000859
+:1030F000000000003C038000346200708C49000036
+:103100008F8800002484000727BDFFF83084FFF873
+:10311000AF890030974D008A31ACFFFFAFAC0000A3
+:103120008FAB0000016850232547FFFF30E61FFFEB
+:1031300000C4282B14A0FFF73C0C8000358B0070D6
+:103140008D6A00003C0708008CE700843C060800FC
+:103150008CC6008000081082014918230002788084
+:1031600000E370210000202101C3C82B00C4C0214E
+:1031700001FA4021031948212502400027BD00081B
+:103180003C010800AC2E00843C010800AC29008002
+:1031900003E00008000000008F8200002486000782
+:1031A00030C5FFF800A2182130641FFF03E00008BB
+:1031B000AF8400008F8700388F8A004027BDFFB89A
+:1031C0008F860044AFB60040AFBF0044AFB5003CAF
+:1031D000AFB40038AFB30034AFB20030AFB1002CA1
+:1031E000AFB000288F4501048D4900ACAF47008087
+:1031F0008CC8002000A938230000B021AF480E1071
+:103200008F440E1000004821AF440E148CC20024DD
+:10321000AF420E188F430E18AF430E1C10E001256D
+:103220002D230001936B0008116000D40000000002
+:10323000976E001031CDFFFF00ED602B158000CFA1
+:103240000000000097700010320FFFFFAF4F0E001C
+:103250008F520000325100081220FFFD00000000D4
+:1032600097540E088F460E043285FFFF30B30001DD
+:1032700012600132000000000000000D30B8A040D4
+:1032800024150040131500C030A9A0001120012D05
+:1032900000000000937F000813E000080000000019
+:1032A00097630010306BFFFF00CB402B1100000331
+:1032B00030AC00401180012300000000A785003CD5
+:1032C000AF8600349366000800E02821AFA70020F5
+:1032D00014C0012427B30020AF60000C9782003C8B
+:1032E0003047400014E00002240300162403000EBF
+:1032F00024194007A363000AAF790014938A003EA3
+:103300008F740014315800070018AA4002959025C8
+:10331000AF7200149784003C8F700014309100103D
+:1033200002117825AF6F0014978E003C31CD000854
+:1033300011A00147000028218F6700143C021000F3
+:103340003C0C810000E22825AF65001497460E0A68
+:103350002408000E3405FFFC30C3FFFF006C582525
+:10336000AF6B0004A3680002937F000A27E9000402
+:10337000A369000A9786003C9363000A30CC1F00C3
+:10338000000C598301634021251F0028A37F0009F9
+:1033900097490E0CA769001093790009272A0002AB
+:1033A000315800070018A82332B10007A371000BA1
+:1033B00093740009976400108F910034978F003C3C
+:1033C000329200FF024480210205702131ED00405D
+:1033D00011A0000531C4FFFF0091282B3C12800092
+:1033E00010A000140000A0210224382B14E0011BBF
+:1033F0008FA500208F4D0E14AF4D0E108F420E1C66
+:10340000AF420E18AF440E008F4F000031EE00089F
+:1034100011C0FFFD0000000097540E0800808821B5
+:1034200000009021A794003C8F500E04241400014A
+:10343000AF900034976400103095FFFF8E68000055
+:103440000111F82317E00009AE7F00008F6500141A
+:103450008F8B004434A60040AF6600148F4C0E10D2
+:10346000AD6C00208F430E18AD63002493670008F5
+:1034700014E000D2000000000E00009E24040010A2
+:103480008F8900483C08320000402821312600FF87
+:103490000006FC0003E8502525390001AF990048DB
+:1034A000AC4A0000937800099370000A330400FFCF
+:1034B00000047400320F00FF01CF6825AC4D0004FA
+:1034C0008F820048064000EAACA20008ACA0000CC5
+:1034D0009783003C306B0008156000022628000628
+:1034E00026280002974E0E148F450E1C8F6700048D
+:1034F000936D000231C4FFFF31A200FFAFA20010A4
+:103500008F6C0014AFA800180E00008BAFAC001435
+:10351000240400100E0000C7000000008E7200009E
+:1035200016400005000000008F6400142405FFBF52
+:1035300000859824AF7300148F79000C033538216F
+:10354000AF67000C9375000816A00008000000008B
+:1035500012800006000000008F7F00143C0BEFFF7C
+:103560003568FFFE03E84824AF690014A37400081F
+:103570008FA500200A00024602202021AF470E003E
+:103580000A0000F5000000008F5901780720FFFEB7
+:10359000241F08008F840000AF5F0178974B008ADA
+:1035A000316AFFFF014448232528FFFF31021FFF36
+:1035B0002C4300081460FFF9000000008F8E0048C3
+:1035C0008F8D003800C048210344202125C600010A
+:1035D000240C0F00AF86004800E938232486400001
+:1035E00031CA00FF11AC0005240800019391003E90
+:1035F0003230000700107A4035E80001000AAC00C4
+:103600003C18010002B8A025AC9440008F930048FC
+:1036100030B2003630A40008ACD30004108000970C
+:1036200001123025974E0E0A8F8D00003C0281005A
+:1036300031CCFFFF25AB0008018240253C03100080
+:1036400031651FFF25390006241F000EAF480160B9
+:1036500000C33025A75F015AAF850000A759015864
+:1036600014E0000A8F93003824120F0052720002F7
+:103670002416000134C600408F580E108F94004469
+:10368000AE9800208F550E18AE9500248F450E146D
+:10369000AF4501448F590E1CAF590148A34A01524E
+:1036A0003C0A1000AF460154AF4A017814E0FEDD39
+:1036B0002D2300010076A025128000178FBF004443
+:1036C0008F84003824160F0010960084000000003C
+:1036D0008F45017804A0FFFE24150F001095006EA1
+:1036E000000000008F470E14240202403C1F10000F
+:1036F000AF4701448F440E1CAF440148A340015220
+:10370000A740015AAF400160A7400158AF420154A1
+:10371000AF5F01788FBF00448FB600408FB5003C8B
+:103720008FB400388FB300348FB200308FB1002CCB
+:103730008FB0002803E0000827BD004814C0FED069
+:1037400030B8A0408F420E148F84004400004821FE
+:10375000AC8200208F510E1CAC9100240A00020E96
+:103760002D2300018F910034978A003C3C12800089
+:103770000220A821315800401700FF300000A0218E
+:10378000976900108F9200343139FFFF13320035F2
+:1037900000002021008048211480FEA000A03821D4
+:1037A0008F420E148F840044AC8200208F510E1C77
+:1037B000AC9100240A00020E2D230001936A000937
+:1037C0009378000B315000FF330F00FF020F702180
+:1037D00025C2000A3050FFFF0E00009E020020218B
+:1037E0008F8600483C1F410024CD0001AF8D00486A
+:1037F000936C000930C600FF00064400318300FFCF
+:10380000246B0002010B4825013FC825AC5900007C
+:103810008F67000C97440E1400F22825AC45000475
+:103820008F450E1C8F670004936A00023084FFFFEF
+:10383000315800FFAFB800108F6F0014AFB10018FF
+:103840000E00008BAFAF00140A0001A60200202179
+:10385000AF6000040A00013EA36000020A000246B5
+:1038600000002021000090210A00017024140001B2
+:103870003C1280000A000195ACB2000C8F91000050
+:1038800025240002A744015826300008320F1FFFEC
+:103890000A0001F9AF8F0000AF40014C1120002C4D
+:1038A000000000008F590E10AF5901448F430E18CD
+:1038B000240200403C1F1000AF430148A3400152C6
+:1038C000A740015AAF400160A7400158AF420154E0
+:1038D000AF5F01780A0002278FBF00441120000665
+:1038E0000000000097460E0830CC00401580000212
+:1038F000000000000000000D8F4D017805A0FFFEC4
+:103900000000000097530E103C120500240E20000A
+:10391000326AFFFF0152C025AF58014C8F4F0E1481
+:103920003C021000AF4F01448F500E1CAF500148B5
+:10393000A34001528F840038A740015AAF40016074
+:10394000A7400158AF4E01540A000215AF4201785A
+:103950008F490E14AF4901448F430E1C0A00028E9A
+:10396000240200403C0E20FF27BDFFE03C1A8000EF
+:103970003C0F800835CDFFFDAFBF001CAFB2001873
+:10398000AFB10014AFB00010AF8F0040AF4D0E00CC
+:103990000000000000000000000000000000000027
+:1039A000000000003C0C00FF358BFFFDAF4B0E000C
+:1039B0003C0660048CC95000240AFF7F3C11600063
+:1039C000012A40243507380CACC750008E24043837
+:1039D00024050009AF4500083083FFFF38622F71CE
+:1039E0002450C0B3AF8000480E000068AF800000D4
+:1039F00052000001AE20442C0E0004353C11800022
+:103A00000E000ED9363000708F8A00403C1208003C
+:103A100026523C88020088218E0800008F5F00003B
+:103A20003BF900013338000113000017AF88003064
+:103A3000022048218D2700003C0F08008DEF006C0C
+:103A40003C0C08008D8C006800E8C02301F8282198
+:103A50000000682100B8302B018D582101664021FB
+:103A60003C010800AC25006C3C010800AC28006853
+:103A70008F44000038830001306200011440FFEDE4
+:103A800000E04021AF8700308E0C00003C050800AC
+:103A90008CA5006C3C0408008C84006801883023ED
+:103AA00000A638210000102100E6402B00821821DA
+:103AB0000068F8213C010800AC27006C3C010800BC
+:103AC000AC3F00688F49010025590088AF99004438
+:103AD000AF890038AF4900208E070000AF87003063
+:103AE0008F4D017805A0FFFE000000008E0600004B
+:103AF0003C0B08008D6B00743C0408008C84007043
+:103B000000C728230165F8210000102103E5402BA0
+:103B10000082382100E8C821240908003C0108007F
+:103B2000AC3F00743C010800AC390070AF4901782B
+:103B300093580108A398003E938F003E31EE000198
+:103B400015C000158F830038240E0D00106E00196B
+:103B5000240F0F00106F001D00000000915900009D
+:103B600024180050332900FF113800043C1F400086
+:103B7000AF5F01380A0002E7000000000E00090EE6
+:103B8000000000008F8A00403C1F4000AF5F0138FA
+:103B90000A0002E700000000938D003E31AC0006F1
+:103BA000000C51000E0000CE0152D8210A00034340
+:103BB0008F8A00403C1B0800277B3D080E0000CE8A
+:103BC000000000000A0003438F8A00403C1B0800ED
+:103BD000277B3D280E0000CE000000000A000343B2
+:103BE0008F8A004090AA00018FAB00108CAC0010AF
+:103BF0003C0300FF8D680004AD6C00208CAD001408
+:103C000000E060213462FFFFAD6D00248CA7001836
+:103C10003C09FF000109C024AD6700288CAE001CE0
+:103C20000182C82403197825AD6F0004AD6E002C05
+:103C30008CAD0008314A00FFAD6D001C94A9000254
+:103C40003128FFFFAD68001090A70000A5600002BA
+:103C5000A1600004A167000090A30002306200FF91
+:103C60000002198210600005240500011065000E95
+:103C70000000000003E00008A16A00018CD80028C1
+:103C8000354A0080AD7800188CCF0014AD6F001459
+:103C90008CCE0030AD6E00088CC4002CA16A0001EF
+:103CA00003E00008AD64000C8CCD001CAD6D001865
+:103CB0008CC90014AD6900148CC80024AD680008DC
+:103CC0008CC70020AD67000C8CC200148C8300648C
+:103CD0000043C82B13200007000000008CC2001412
+:103CE000144CFFE400000000354A008003E00008A7
+:103CF000A16A00018C8200640A00039900000000A0
+:103D000090AA000027BDFFF88FA9001CA3AA0000FD
+:103D10008FAE00003C0FFF808FA8001835E2FFFF38
+:103D20008CCD002C01C26024AFAC0000A1200004A7
+:103D300000E06021A7A000028FB800008D270004DA
+:103D40000188182100A0582100C05021006D2826AC
+:103D50003C06FF7F3C0F00FF2CAD000135EEFFFF5E
+:103D600034D9FFFF3C02FF0003193024000D1DC0B1
+:103D7000010EC82400E2C02400C370250319782571
+:103D8000AD2E0000AD2F00048D450024AFAE000025
+:103D9000AD2500088D4D00202405FFFFAD2D000C42
+:103DA000956800023107FFFFAD27001091660018EB
+:103DB00030C200FF000219C2506000018D4500347E
+:103DC000AD2500148D67000827BD0008AD27001C35
+:103DD0008C8B00CCAD2C0028AD20002CAD2B00240A
+:103DE000AD20001803E00008AD20002027BDFFE053
+:103DF000AFB20018AFB10014AFB00010AFBF001CDD
+:103E00009098000000C088213C0D00FF330F007F18
+:103E1000A0CF0000908E000135ACFFFF3C0AFF00F0
+:103E2000A0CE000194A6001EA22000048CAB0014BA
+:103E30008E29000400A08021016C2824012A40243E
+:103E40000080902101052025A6260002AE24000452
+:103E500026050020262400080E0000762406000215
+:103E600092470000260500282624001400071E00A3
+:103E70000003160324060004044000032403FFFF8C
+:103E8000965900023323FFFF0E000076AE23001088
+:103E9000262400248FBF001C8FB200188FB100149D
+:103EA0008FB0001024050003000030210A000080BC
+:103EB00027BD002027BDFFD8AFB1001CAFB0001850
+:103EC000AFBF002090A80000240200018FB0003C8A
+:103ED0003103003F00808821106200148FAA00384F
+:103EE000240B0005506B0016AFAA001000A0202183
+:103EF00000C028210E0003DC02003021922400BC07
+:103F0000308300021060000326060030ACC00000C1
+:103F100024C600048FBF00208FB1001C8FB0001892
+:103F200000C0102103E0000827BD0028014038210F
+:103F30000E00035AAFB000100A0004200000000079
+:103F40000E0003A1AFB000140A000420000000001E
+:103F50003C02000A034218213C04080024843D6C02
+:103F60002405001A000030210A000080AF830054AD
+:103F70003C038000346200708C48000000A058218F
+:103F800000C04821308A00FFAF8800308F4401789C
+:103F90000480FFFE3C0C8000358600708CC500005C
+:103FA0003C0308008C6300743C1808008F180070F4
+:103FB00000A82023006468210000C82101A4782BF8
+:103FC0000319702101CF60213C010800AC2D007461
+:103FD0003C010800AC2C00708F480E14AF4801441F
+:103FE000AF47014CA34A0152A74B01589346010821
+:103FF00030C5000854A0000135291000934B09007A
+:1040000024070050316A00FF11470007000000003C
+:104010008F450E1CAF450148AF4901543C091000C3
+:1040200003E00008AF490178934D010831A800086A
+:104030001100001000000000934F010831EE001045
+:1040400051C00001352900083C04080090843DD08F
+:10405000A34401508F4309A4AF4301488F4209A0F4
+:10406000AF420144AF4901543C09100003E000088D
+:10407000AF4901783C1908008F393D8C333800086E
+:104080005700FFF1352900080A0004730000000002
+:1040900024070040AF470814AF4008108F4209447E
+:1040A0008F4309508F4409548F45095C8F46094C52
+:1040B000AF820064AF830050AF84004CAF85005CDA
+:1040C00003E00008AF8600609346010930C5007F19
+:1040D000000518C0000521400083102103E00008FE
+:1040E000244200883C09080091293D9124A800023F
+:1040F0003C05110000093C0000E8302500C51825EA
+:1041000024820008AC83000003E00008AC800004B7
+:104110009347010B8F4A002C974F09083C18000E5B
+:104120000358482131EEFFFF000E41C0AF48002C7C
+:1041300097430908952C001A0080402124030001B0
+:10414000318BFFFFAC8B00008D2D001C00A058218F
+:1041500000C06021AC8D00048D24002030E70040B9
+:10416000AD04000891220019304400031083004878
+:104170002885000214A00062240600021086005662
+:1041800024190003109900660000000010E0003AB6
+:10419000000000003C07080094E73D8624E200018F
+:1041A000934F0934934709219525002A31EE00FFEA
+:1041B000000E488230ED00FF978700580009360056
+:1041C000000D1C003044FFFF00C310250044C02533
+:1041D00000A778213C19400003197025000F4C00FE
+:1041E000AD090004AD0E0000934D09203C0300060C
+:1041F00025090014000D360000C32025AD04000879
+:104200008F59092C24E5000130A27FFFAD19000C65
+:104210008F580930A782005825020028AD180010D9
+:104220008F4F0938AD0F0014AD2B00048F4E09409D
+:10423000AD2E0008934D09373C05080090A53D9030
+:104240008F4409488F46094031A700FF00EC182130
+:10425000008678230003C7000005CC000319602501
+:1042600031E8FFFC01885825AD2B000CAD20001073
+:1042700003E00008AF4A002C3C0D080095AD3D86D8
+:104280003C0E080095CE3D800A0004C901AE102105
+:104290003C05080094A53D8A3C06080094C63D8074
+:1042A0003C18080097183D7C952E002400A6782124
+:1042B00001F86823000E240025A2FFF200821825D1
+:1042C00024190800AD03000CAD190014AD00001056
+:1042D0000A0004C425080018952600249525002806
+:1042E0000006C40000057C00370E810035ED080093
+:1042F000AD0E000CAD0D00100A0004C4250800141A
+:104300001480FFA200000000952400240004140083
+:1043100034430800AD03000C0A0004C42508001053
+:104320003C03080094633D8A3C05080094A53D8049
+:104330003C06080094C63D7C953900249538002839
+:10434000006520210086782300196C000018740095
+:1043500025E2FFEE01C2202535A3810024190800C3
+:10436000AD03000CAD040010AD190018AD00001431
+:104370000A0004C42508001C03E00008240201F41C
+:1043800027BDFFE8AFB00010AFBF00140E00006003
+:104390000080802124050040AF4508148F83005021
+:1043A0008F84004C8F85005C0070182100641023FE
+:1043B00018400004AF830050AF6300548F66005470
+:1043C000AF86004C1200000C000000008F44007407
+:1043D000936800813409FA002D07000710E00005FA
+:1043E00000891021936C0081240B01F4018B50048F
+:1043F00001441021AF62000C8F4E095C01C5682397
+:1044000019A000048FBF00148F4F095CAF8F005CB0
+:104410008FBF00148FB000100A00006227BD001883
+:104420008F8400648F8300508F82004CAF640044FF
+:10443000AF63005003E00008AF6200543C0380000B
+:10444000346200708C43000027BDFFF8308700FF06
+:1044500030A900FF30C800FFAF8300308F440178DF
+:104460000480FFFE3C028000345900708F38000049
+:10447000A3A700033C0708008CE700748FAC000082
+:104480003C0608008CC60070030378233C0E7FFFB7
+:1044900000EFC82135CDFFFF00005021018D2824F9
+:1044A00000CA1821000847C0032F202B00A81025A0
+:1044B0000064C021AFA200003C010800AC390074C8
+:1044C0003C010800AC380070934F010AA3A0000221
+:1044D0003C0E80FFA3AF00018FAC0000312B007FAA
+:1044E00035CDFFFF018D4824000B5600012A4025E1
+:1044F000240730002406FF803C05100027BD00087B
+:10450000AF48014CAF470154A7400158A3460152A0
+:1045100003E00008AF45017827BDFFE8AFBF0014F6
+:10452000AFB000108F6500743C068000309000FF33
+:1045300000A620250E000060AF64007493630005A0
+:10454000346200080E000062A36200050200202110
+:104550008FBF00148FB00010240500052406000151
+:104560000A00057027BD001827BDFFE03C0380004E
+:10457000AFB00010AFBF0018AFB1001434620070CC
+:104580008C470000309000FF30A800FFAF8700305C
+:104590008F4401780480FFFE3C18800037110070C2
+:1045A0008E2F00003C0D08008DAD00743C0A080001
+:1045B0008D4A007001E7702301AE282100005821C8
+:1045C00000AE302B014B4821012638213C01080068
+:1045D000AC250074000088213C010800AC27007065
+:1045E0001100000F000000008F6200742619FFFF09
+:1045F0003208007F0002FE0233E5007F150000064E
+:10460000332200FF2407FF800207202624A3FFFF98
+:1046100000838025320200FF004080212411100811
+:104620000E000060000000008F49081831250004CA
+:1046300014A0FFFD3218007F001878C000187140E8
+:1046400001CF682125AC0088AF4C0818274A0980A3
+:104650008D4B0020AF4B01448D460024AF460148EE
+:10466000A35001500E000062A74001580220102103
+:104670008FBF00188FB100148FB0001003E0000846
+:1046800027BD002027BDFFE8308400FFAFBF00102A
+:104690000E0005BB30A500FF8F8300508FBF0010B8
+:1046A000344500402404FF903C02100027BD001850
+:1046B000AF43014CA3440152AF45015403E000084D
+:1046C000AF4201789343093E306200081040000D6C
+:1046D0003C0901013528080AAC8800008F470074A6
+:1046E000AC8700043C06080090C63D9030C5001021
+:1046F00050A00006AC8000088F6A0060AC8A0008F9
+:104700002484000C03E00008008010210A00062227
+:104710002484000C27BDFFE8AFBF0014AFB0001029
+:104720009346093F00A050210005288000853823CA
+:1047300030C200FF240300063C09080095293D868D
+:1047400024E8FFD8240500041043003724060002A3
+:104750009750093C3C0F020400063400320EFFFF64
+:1047600001CF6825AC8D0000934C093E318B0020B1
+:104770001160000800000000934309363C02010369
+:10478000345F0300307900FF033FC0252405000893
+:10479000AC98000493430934935909210005F88229
+:1047A000306200FF0002C082332F00FF00186E004D
+:1047B000000F740001AE6025018920253C094000EE
+:1047C00000898025ACF0FFD8934309378F4F094803
+:1047D0008F580940306200FF004AC821033F702112
+:1047E00001F86023000E6F0001A650253185FFFC03
+:1047F000001F58800145482501683821AD09002077
+:104800000E00006024F00028240400040E00006262
+:10481000A364003F020010218FBF00148FB000106E
+:1048200003E0000827BD00180A0006352406001220
+:1048300027BDFFD024090010AFB60028AFB5002473
+:10484000AFB40020AFB10014AFB000103C010800BD
+:10485000A0293D90AFBF002CAFB3001CAFB2001831
+:1048600097480908309400FF3C02000E3107FFFF13
+:10487000000731C0AF46002C974409089344010B50
+:1048800030B500FF03428021308300300000B021AA
+:104890001060012500008821240C00043C01080060
+:1048A000A02C3D90934B093E000B5600000A2E03AE
+:1048B00004A0016000000000AF400048934F010BCE
+:1048C00031EE002011C00006000000009358093EA0
+:1048D00000189E00001396030640018900000000A6
+:1048E0009344010B30830040106000038F9300500D
+:1048F0008F8200502453FFFF9347093E30E60008A3
+:1049000014C0000224120003000090219619002C0C
+:1049100093580934934F0937A7990058330C00FF77
+:1049200031EE00FF024E6821000D5880016C5021CD
+:10493000015140213C010800A4283D869205001841
+:1049400030A900FF010918213C010800A4233D887B
+:104950009211001816200002000000000000000D57
+:104960003C010800A4233D8A3C010800A4203D80AE
+:104970003C010800A4203D7C935F010B3063FFFFE6
+:1049800033F00040120000022464000A2464000B8B
+:104990003091FFFF0E00009E022020219358010B52
+:1049A0003C08080095083D8A0040202100185982E3
+:1049B000316700010E00049A01072821934C010B76
+:1049C0008F4B002C974E09083C0F000E034F4021DF
+:1049D00031CDFFFF000D51C0AF4A002C97430908AD
+:1049E0009505001A004038212404000130A9FFFF7A
+:1049F000AC4900008D06001C00404821318A00406F
+:104A0000AC4600048D020020ACE2000891030019BE
+:104A100030630003106400EC2879000217200118AD
+:104A2000241000021070010C241F0003107F011ECF
+:104A300000000000114000DE000000003C090800FA
+:104A400095293D8625220001935F0934934E092163
+:104A50009504002A33F900FF0019C08231CF00FF0E
+:104A6000978E005800184600000F6C00010D80253D
+:104A70003045FFFF02051025008E50213C03400009
+:104A800000433025000A6400ACEC0004ACE60000F2
+:104A9000935F09203C19000624EC0014001FC60097
+:104AA00003197825ACEF00088F48092C25CD0001AB
+:104AB00031A57FFFACE8000C8F500930A785005866
+:104AC00024E80028ACF000108F4409380100802150
+:104AD000ACE40014AD9300048F530940AD9300087B
+:104AE000934A09373C19080093393D908F43094890
+:104AF0008F460940314200FF0052F82100667023C2
+:104B0000001F7F000019C40001F8282531CDFFFCEB
+:104B100000AD2025AD84000CAD800010AF4B002C03
+:104B2000934B093E317300081260000D3C060101F1
+:104B300034CC080AACEC00288F530074AD13000489
+:104B40003C0B0800916B3D903167001050E0000372
+:104B5000AD0000088F6A0060AD0A00082510000C47
+:104B600012C0003D000000009343093F24160006D8
+:104B700024060004306200FF105600C9240700021A
+:104B80009758093C3C0F0204330DFFFF01AF40254D
+:104B9000AE0800009345093E30A4002010800008B4
+:104BA00000000000935309363C0B0103357F0300DE
+:104BB000327900FF033F7025AE0E00042406000882
+:104BC000934F093493480921312AFFFF31ED00FF4B
+:104BD000000D1082310300FF0002B60000032C001C
+:104BE00002C56025018A9825001220803C094000FA
+:104BF0000204502302695825AD4BFFD8935F093753
+:104C00008F4F09488F58094033F900FF0332702154
+:104C10000006B08201D668210007440001F828236D
+:104C2000000D1F000068302530A2FFFC2547FFD88B
+:104C300000C260250016808002074821ACEC0020ED
+:104C4000253000280E00006024120004A372003FEB
+:104C50000E000062000000009347010B30F200409C
+:104C6000124000053C1900FF8E180000372EFFFF90
+:104C7000030E3024AE0600000E0000C702202021E3
+:104C80003C10080092103D90321100031220000FDA
+:104C900002A028218F89005025330001AF930050D6
+:104CA000AF7300508F6B00540173F8231BE00002B8
+:104CB000026020218F640054AF6400548F4C007454
+:104CC000258401F4AF64000C02A028210280202179
+:104CD000A76000680E0005BB3C1410008F850050D3
+:104CE00034550006AF45014C8F8A00488FBF002C19
+:104CF0008FB3001C25560001AF9600488FB20018F4
+:104D0000A34A01528FB60028AF5501548FB1001449
+:104D1000AF5401788FB500248FB400208FB00010FD
+:104D200003E0000827BD00309358093E00189E009C
+:104D3000001396030642003624110002934409230F
+:104D4000308300021060FEDD8F8600608F8200508D
+:104D500014C2FEDA000000000E0000600000000037
+:104D60009369003F24070016312800FF1107000C4B
+:104D7000240500083C0C0800918C3D90358B000107
+:104D80003C010800A02B3D90936A003F314300FF97
+:104D900010650065240D000A106D005E2402000CF1
+:104DA0000E000062000000000A00069000000000F3
+:104DB0003C09080095293D863C0A0800954A3D803B
+:104DC0000A0006F3012A10213C09080095293D8AB2
+:104DD0003C04080094843D803C06080094C63D7C59
+:104DE00095030024012410210046F8230003CC0081
+:104DF00027F0FFF20330C025240F0800ACF8000CA8
+:104E0000ACEF0014ACE000100A0006EE24E7001836
+:104E10003C010800A0313D90935F093E241600013B
+:104E200033F900201720FEA5241100080A0006907F
+:104E3000241100048F6E00848F4D094011A0FE9E46
+:104E4000AF8E0050240F00143C010800A02F3D90AD
+:104E50000A00068F00000000950E0024950D002822
+:104E6000000E6400000D2C003589810034A6080076
+:104E7000ACE9000CACE600100A0006EE24E70014D2
+:104E80001460FEEC000000009502002400021C00EB
+:104E900034640800ACE4000C0A0006EE24E70010BD
+:104EA0000A000741240700123C02080094423D8A90
+:104EB0003C06080094C63D803C03080094633D7C9A
+:104EC00095100024951900280046F82103E3C0231B
+:104ED00000106C0000197400270FFFEE01CF282589
+:104EE00035AC8100ACEC000CACE5001024070800E8
+:104EF000AD2700182527001C0A0006EEAD2000147F
+:104F00008F7F004CAF7F00548F7900540A000699C0
+:104F1000AF790050A362003F0E0000620000000065
+:104F20000A00069000000000240200140A0008276E
+:104F3000A362003F27BDFFE8308400FFAFBF001031
+:104F40000E0005BB30A500FF9378007E9379007FAB
+:104F5000936E00809368007A332F00FF001866007C
+:104F6000000F6C0031CB00FF018D4825000B520073
+:104F70008FBF0010012A3825310600FF344470002D
+:104F800000E628252402FF813C03100027BD0018FD
+:104F9000AF45014CAF440154A342015203E0000865
+:104FA000AF43017827BDFFD8AFB20018AFB10014EE
+:104FB000AFB00010AFBF0020AFB3001C9342010997
+:104FC000308600FF30B000FF000618C23204000235
+:104FD0003071000114800005305200FF9367000516
+:104FE00030E5000810A0000D30C80010024020215C
+:104FF0000E0005A702202821240400018FBF0020F5
+:105000008FB3001C8FB200188FB100148FB0001046
+:105010000080102103E0000827BD002815000032A1
+:105020000000000093430109000028213062007F46
+:10503000000220C00002F94003E49821267900888C
+:10504000033B98218E7800248E6F0008130F0046D2
+:10505000000000008F640084241800020004FD8218
+:1050600033F900031338007C0000000093660083CE
+:10507000934A0109514600043205007C10A00060EB
+:10508000000000003205007C14A0005302402021E3
+:1050900016200006320400018E7F00248F5901047F
+:1050A00017F9FFD600002021320400011080000A09
+:1050B000024020218F4209408F9300641053000664
+:1050C000000000000E00066D022028218F430940D9
+:1050D000AF630044024020210E0006020220282176
+:1050E0000A000860240400013C0908008D290064BE
+:1050F000252600013C010800AC26006416000012C1
+:10510000000000008F6D00843C0E00C001AE6024E2
+:1051100015800005024020210E00082E02202821C3
+:105120000A00086024040001240500040E00057034
+:1051300024060001024020210E00082E0220282112
+:105140000A000860240400010E000041240400014C
+:10515000936B007D020B50250E000062A36A007D58
+:105160000A0008A38F6D00848F6600748F480104C5
+:105170008E67002400064E021507FFB63126007F19
+:10518000936B008326440001308A007F1146004360
+:10519000316300FF5464FFB08F6400842645000132
+:1051A00030B1007F30A200FF122600042405000168
+:1051B000004090210A00087624110001240FFF808E
+:1051C000024F702401CF9026324200FF0040902110
+:1051D0000A000876241100010E00066D0220282125
+:1051E000321800301300FFAA321000820240202142
+:1051F0000E0005A7022028210A00086024040001EF
+:105200008F6E00743C0F80002405000301CF9025B1
+:10521000AF72007493710083240600010E000570C4
+:10522000322400FF0E00004124040001936D007D34
+:10523000020D60250E000062A36C007D3C0B08008F
+:105240008D6B0054257000013C010800AC30005407
+:105250000A000860240400018F6800743C09800083
+:105260002405000401093825AF67007493630083A7
+:10527000240600010E000570306400FF0E0000419E
+:10528000240400019362007D020298250E00006252
+:10529000A373007D0A00086024040001324D0080E1
+:1052A00039AC0080546CFF6C8F6400840A0008C91C
+:1052B0002645000127BDFFC83C0A0008AFBF0030EB
+:1052C000AFB5002CAFB40028AFB30024AFB20020BC
+:1052D000AFB1001CAFB00018034AD8212409004028
+:1052E000AF490814AF4008108F4209448F4309505A
+:1052F0008F4609548F47095C8F48094C9344010835
+:105300009345010BAF820064308400FF30A500FF9D
+:10531000AF830050AF86004CAF87005C0E00084A98
+:10532000AF8800601440017D8FBF0030A760006827
+:10533000934D0900240B00503C15080026B53D484C
+:1053400031AC00FF3C12080026523D58118B00037F
+:10535000000000000000A8210000902193510109E5
+:105360008F9F005024040010322E007F000E68C072
+:10537000000E6140018D282124B40088AF54081824
+:105380008F4901048F4A09A43C0B000E034BC02136
+:10539000012A10233C010800AC223D6C8F430958C0
+:1053A0003C010800A0243D9097470908007F302366
+:1053B0003C010800AC263D7030E8FFFF0008C9C082
+:1053C0003C010800AC3F3D94AF59002C97420908BE
+:1053D0009710002C8EB10000930F001803749821D1
+:1053E000A7900058AF9300440220F80931F000FF65
+:1053F000304E000215C001B2304F000111E0014FE4
+:10540000000000009343093E3066000814C000020B
+:10541000241400030000A0218F5809A424130001C4
+:105420003C010800AC383D98934F0934935109373B
+:1054300031EC00FF322E00FF028E6821000D288023
+:1054400000AC5021015058213C010800A42B3D889C
+:105450003C010800A42A3D8693490934312200FF0B
+:1054600002022021249000103C010800A4303D8459
+:10547000240700068F9F00503C010800AC273D8C9C
+:105480008F88005C8F59095800008021011F282354
+:1054900004A00149033F20230480014700A4302BCE
+:1054A00010C00149000000003C010800AC253D701F
+:1054B0008E4200000040F809000000003043000266
+:1054C000146000F80040882130440001548000102E
+:1054D0008E4200043C0908008D293D743C0AC0003E
+:1054E000012A8025AF500E008F45000030AB000828
+:1054F0001160FFFD00000000974D0E082410000110
+:10550000A78D003C8F4C0E04AF8C00348E420004FB
+:105510000040F8090000000002228825322E000217
+:1055200015C00180000000003C09080095293D7C61
+:105530003C06080094C63D883C0A0800954A3D7E1A
+:105540003C1908008F393D74012660213C18080081
+:105550008F183D983C03080094633D92018A2021F6
+:105560008F4E09400329F821248F000203E32821EC
+:10557000031968213C010800A42C3D8AAF8E006409
+:105580003C010800AC2D3D983C010800A4253D805D
+:105590000E00009E31E4FFFF8F870048004020216D
+:1055A0003C010800A0273D918E42000824E800013C
+:1055B000AF8800480040F809000000009344010B48
+:1055C0008F4C002C974A09083C0B000E034B4021DE
+:1055D0003149FFFF000919C08F8B0050AF43002CE9
+:1055E000974309089506001A00403821308A004088
+:1055F00030DFFFFFAC5F00008D19001C0040482128
+:10560000AC5900048D180020AC580008910F001907
+:1056100031E30003107300F0000000002862000274
+:105620001440010924050002106500FD240D00034B
+:10563000106D010D00000000114000D900000000B5
+:105640003C0A0800954A3D8625420001934D0934E5
+:1056500093580921950E002A31A300FF00032082F0
+:10566000331F00FF9798005800047E00001FCC00F5
+:1056700001F940253049FFFF0109102501D83021EB
+:105680003C0540000045502500066C00ACED0004D0
+:10569000ACEA0000934309203C04000624ED00140A
+:1056A0000003FE0003E4C825ACF900088F49092C6B
+:1056B000270F000131EE7FFFACE9000C8F48093065
+:1056C000A78E005824E90028ACE800108F4509385F
+:1056D00001204021ACE50014ADAB00048F4209402D
+:1056E000ADA20008934B09373C1F080093FF3D9083
+:1056F0008F4309488F4A0940316600FF00D42021BA
+:10570000006A78230004C700001FCC000319282575
+:1057100031EEFFFC00AE1025ADA2000CADA00010D4
+:10572000AF4C002C934C093E318B00085160000FA8
+:105730008E58000C3C06010134CA080AACEA002865
+:105740008F4B0074AD2B00043C0C0800918C3D90F5
+:105750003187001050E00003AD2000088F62006028
+:10576000AD2200082528000C8E58000C0300F80913
+:10577000010020213C19080097393D8A3C1F080090
+:1057800097FF3D7E033F782125E900020E0000C708
+:105790003124FFFF3C0E08008DCE3D6C3C08080014
+:1057A0008D083D7401C828233C010800AC253D6CE0
+:1057B00014A00006000000003C0308008C633D8C30
+:1057C000346400403C010800AC243D8C12000070A1
+:1057D0008F8C00448F470E108F900044AE0700203E
+:1057E0008F4D0E18AE0D00243C10080096103D8021
+:1057F0000E0000600000000024020040AF420814C8
+:105800008F8600508F8A004C00D01821006A5823E0
+:1058100019600004AF830050AF6300548F650054DB
+:10582000AF85004C1200000C000000008F44007493
+:10583000936800813409FA002D0E000711C000059D
+:1058400000891821937F0081241901F403F9780459
+:1058500001E41821AF63000C8F44095C8F83005C66
+:105860000083C0231B000003000000008F50095C70
+:10587000AF90005C0E000062000000008F8C0050B2
+:105880008E4700103C010800AC2C3D9400E0F80964
+:10589000000000003C0D08008DAD3D6C55A0FEF5EC
+:1058A000240700068F450024975909088F8B006450
+:1058B0008F9400503C0F001F978200588F86005431
+:1058C0008F93004C3328FFFF35E9FF8000A9502457
+:1058D000000871C032320100AF4E0024A4C2002C77
+:1058E000AF4A0024AF6B0044AF740050AF73005454
+:1058F0001640008032380010570000868EA4000445
+:10590000322300405460001B8EB100088EB0000CA2
+:105910000200F809000000008FBF00308FB5002C96
+:105920008FB400288FB300248FB200208FB1001CE9
+:105930008FB0001803E0000827BD00389347010925
+:105940008F8800380007FE0003E8C825AF590080A3
+:105950008F5809A08F5309A4AFB80010AF580E1488
+:105960008FB40010AF540E10AF530E1C0A00096222
+:10597000AF530E180220F809000000008EB0000C92
+:105980000200F809000000000A000AA88FBF0030DA
+:10599000A5800020A59300220A000A5BAD93002495
+:1059A0003C09080095293D863C06080094C63D80C8
+:1059B0000A0009F4012610213C010800AC203D70CA
+:1059C0000A00098E8E4200003C010800AC243D70A4
+:1059D0000A00098E8E4200003C03080094633D8A51
+:1059E0003C04080094843D803C1F080097FF3D7CE8
+:1059F000951800240064C821033F782300186C0028
+:105A000025EEFFF201AE2825AC45000C240208006B
+:105A1000ACE20014ACE000100A0009EF24E7001823
+:105A200095060024950900280006240000091C00A2
+:105A3000349F810034790800ACFF000CACF90010F1
+:105A40000A0009EF24E700141460FEFB00000000C8
+:105A50009518002400187C0035EE0800ACEE000C10
+:105A60000A0009EF24E700103C07080094E73D8096
+:105A70003C04080094843D8A3C03080094633D7C08
+:105A800095190024951800280087F82103E378234E
+:105A90002407080000192C0000186C0025EEFFEE0A
+:105AA00001AE302534A28100AD2700182527001C47
+:105AB000AD22000CAD2600100A0009EFAD20001445
+:105AC00093520109000028210E000602324400FF13
+:105AD0008FBF00308FB5002C8FB400288FB3002407
+:105AE0008FB200208FB1001C8FB0001803E00008B7
+:105AF00027BD0038935F010933E400FF0E00066DF7
+:105B000000002821323800105300FF7E322300406D
+:105B10008EA400040080F809000000000A000AA218
+:105B2000322300401200FF5F000000008F540E146B
+:105B30008F920044AE5400208F530E1C0A000A8A34
+:105B4000AE5300248F82001C008040213C040100E1
+:105B50009047008530E3002010600009000000003D
+:105B60003C0708008CE73D948F83001800E3202356
+:105B7000048000089389000414E30003010020213D
+:105B800003E00008008010213C04010003E000084D
+:105B9000008010211120000B006738238F8C00201B
+:105BA00024090034918B00BC316A0002514000018D
+:105BB0002409003000E9682B15A0FFF10100202125
+:105BC00000E938232419FFFC00B9C02400F9782427
+:105BD00000F8702B15C0FFEA01E8202130C2000355
+:105BE0000002182314C000123069000300003021A5
+:105BF00000A9702101C6682100ED602B1180FFE033
+:105C00003C0401002D2F00010006482B010538211E
+:105C100001E9302414C0FFDA24E4FFFC2419FFFC5E
+:105C200000B9C0240308202103E0000800801021EF
+:105C30008F8B002024060004916A00BC31440004CC
+:105C40001480FFEC00A970210A000B5E00003021D7
+:105C500027BDFFE8AFBF00108F460100934A01093E
+:105C60003C1F08008FFF00902407FF80314F00FF8A
+:105C700031E8007F0008614003E6C821032CC02101
+:105C800027090120012770243C010800A02F3DD0E6
+:105C9000AF4E080C3C0D08008DAD00903C04008018
+:105CA0003482000301A65821016C182124650120CB
+:105CB00030AA007801424025AF48081C3C1F08006C
+:105CC0008FFF00908F88004003E6C0213319000742
+:105CD00003074824033A7821AF49002825E909C081
+:105CE000952E00023C0D08008DAD008C3C0A08008A
+:105CF0008D4A009031CC3FFF01A61821000C59803D
+:105D0000006B282100A72024AF44002C952200021C
+:105D10003C1F08008FFF008C9107008530593FFF22
+:105D200003E678210019C1800146702101F868213D
+:105D300031CC007F31AB007F019A2821017A5021BC
+:105D40003C03000C3C04000E00A328210144102158
+:105D500030E6002027470980AF82002CAF88001C66
+:105D6000AF890024AF85002010C00006AF8700284F
+:105D70008D0200508CA4010C0044302318C0007721
+:105D800000000000910C0085240DFFDF018D3824F8
+:105D9000A10700858F8B001C8F8900248F87002826
+:105DA0008D65004CAF850018912F000D31EE00205D
+:105DB00011C000170000000024090001A38900049D
+:105DC000AF80000C8CE400248F85000C240A0008AE
+:105DD000AF800008AF8000103C010800A42A3D7E7F
+:105DE0003C010800A4203D920E000B32000030213F
+:105DF0008F8500248FBF0010AF82001490A8000D83
+:105E000027BD00180008394203E0000830E2000115
+:105E1000913F00022418000133F900FF001921828C
+:105E200010980039240800021088005B8F86002C2F
+:105E30008CE5002414A0001B8F9F002091220000FD
+:105E4000240A00053046003F10CA00472404000120
+:105E50008F860008A3840004AF860010AF86000C74
+:105E60008CE400248F85000C240A00083C01080003
+:105E7000A42A3D7E3C010800A4203D920E000B3276
+:105E8000000000008F8500248FBF0010AF82001437
+:105E900090A8000D27BD00180008394203E0000853
+:105EA00030E200018CF800088CF900248FEE00C469
+:105EB000A38000048CE40024AF8E000C8F85000CBE
+:105EC0008F86000803197823240A0008AF8F00107A
+:105ED0003C010800A42A3D7E3C010800A4203D921C
+:105EE0000E000B32000000008F8500248FBF0010D1
+:105EF000AF82001490A8000D27BD00180008394299
+:105F000003E0000830E20001912300003062003F0E
+:105F1000104400278F8500208CE400241480002189
+:105F2000000000008D2E00183C187FFF8F85002098
+:105F3000370FFFFF01CF1824AF8300088F9F0008A1
+:105F40008CA8008403E8C82B1720000203E020215E
+:105F50008CA400840A000BEDAF8400088CA3010C14
+:105F60000A000BCBAF8300188D2C00188F86000819
+:105F70003C0D7FFF8F89002035A3FFFF018358244C
+:105F800024040001AF8B0010AD2000CCA3840004DA
+:105F90000A000BF9AF86000C8CCA00140A000BED46
+:105FA000AF8A00088CA300C80A000C30AF83000839
+:105FB0008F84002C8CAC00648C8D0014018D582BC8
+:105FC00011600004000000008CA200640A000C3084
+:105FD000AF8200088C8200140A000C30AF820008E7
+:105FE0008F85000C27BDFFE0AFBF0018AFB10014D4
+:105FF00014A00007AFB000108F8600242402000513
+:1060000090C400003083003F106200B68F840020EF
+:106010008F91000800A080218F8C00283C0508008B
+:106020008CA53D708D8B000431663FFF00C5502B61
+:106030005540000100C02821938D000411A0007379
+:1060400000B0F82B8F98002024040034930F00BC7C
+:1060500031EE000251C000012404003000A4C82B1E
+:10606000172000D10000000000A4282300B0F82B66
+:106070003C010800A4243D7C17E0006802002021B8
+:106080003C0308008C633D6C0083102B54400001DE
+:10609000008018218F8800243C010800AC233D7447
+:1060A000000048219104000D308300205060000161
+:1060B0008F490E188F8300140123382B10E00059EC
+:1060C000000000003C0408008C843D7400895821C5
+:1060D000006B502B114000560090602B006930235C
+:1060E00000C020213C010800AC263D7412000003D2
+:1060F000241FFFFC1090008A32270003009FC82451
+:106100003C010800AC393D743C010800A4203D92DC
+:106110008F84000C120400078F830020AF910008C9
+:10612000020020218C7100CCAF90000C26300001C1
+:10613000AC7000CC3C0208008C423D748F8A001089
+:10614000240700180082202301422823AF84000C7A
+:1061500010800002AF850010240700108F86001CFD
+:106160003C010800A0273D902407004090CC00850A
+:10617000318B00C0116700408F8D001414A00015F2
+:1061800000002021934A01098F420974314500FF24
+:106190000002260224A300013090007F3071007FAE
+:1061A0001230007A2407FF80A0C300833C09080056
+:1061B0008D293D8C8F880024240D0002352C000889
+:1061C0003C010800A02D3DD13C010800AC2C3D8CC9
+:1061D00024040010910E000D31C6002010C00005EF
+:1061E00000801821240800013C010800AC283D74FF
+:1061F000348300018FBF00188FB100148FB00010DE
+:106200000060102103E0000827BD00203C010800C9
+:10621000A4203D7C13E0FF9A020020210A000C819B
+:1062200000A020213C0408008C843D740090602B69
+:106230001180FFAE000000003C0F080095EF3D7C90
+:1062400001E4702101C6682B11A000072C82000414
+:106250003C1F60008FF954043338003F1700FFE5FE
+:10626000240300422C8200041040FFA024030042BB
+:106270000A000CDF8FBF0018152DFFC000000000C2
+:106280008CDF00743C0380002405FF8003E3C825F5
+:10629000ACD9007490D80085240E000424040010AA
+:1062A000330F003F01E54025A0C800858F880024FA
+:1062B0003C010800A02E3DD1240300019106000DF1
+:1062C00030C9002015200003000000003C03080036
+:1062D0008C633D743C010800AC233D6C0A000CD675
+:1062E000000000008F8700108C88008400E8282BB5
+:1062F00014A0000200E088218C9100842409000190
+:10630000A38900048F440E18022028210E000B32AE
+:1063100002203021022080210A000C67AF82001485
+:1063200000071823306600033C010800A4263D92B4
+:10633000122000058F8C0020918B00BC316A000474
+:106340001540001524CD00043C0F080095EF3D9248
+:1063500001E4702100AE302B50C0FF6E8F84000C22
+:106360002C85000514A0FFA32403004230980003ED
+:1063700017000002009818232483FFFC3C0108004A
+:10638000AC233D740A000CA30000000000A75824B1
+:106390000A000CCB016718263C010800A42D3D9291
+:1063A0000A000D33000000003C010800AC203D74E1
+:1063B0000A000CDE240300428F83001014600007E3
+:1063C000000010218F88002424050005910600009C
+:1063D00030C400FF108500030000000003E0000847
+:1063E00000000000910A0018314900FF000939C27D
+:1063F00014E0FFFA8F85001C3C04080094843D7C67
+:106400003C0308008C633D943C1908008F393D74AF
+:106410003C0F080095EF3D920064C0218CAD005404
+:106420000319702101CF6021018D58231960001DCF
+:1064300000000000910E001C8F8C002C974B0E105A
+:1064400031CD00FF8D850004016D30238D88000063
+:1064500030CEFFFF000E510000AAC82100003821F5
+:1064600001072021032A182B0083C021AD990004C5
+:10647000AD980000918F000A01CF6821A18D000A1C
+:106480008F88002C974B0E12A50B0008950A003838
+:1064900025490001A50900389107000D34E60008E0
+:1064A000A106000D03E000080000000027BDFFE08A
+:1064B000938700048F8F00248FAD00143C0E7FFF64
+:1064C0008F89000C35C8FFFFAFBF001CAFB00018AC
+:1064D00001A8182491EA000D000717C03C1FBFFF58
+:1064E000006258252D2E00018F90001837F9FFFF0C
+:1064F0003C1808008F183D943C0F080095EF3D8A2A
+:1065000001796824000E47803C07EFFF3C05F0FF4F
+:1065100001A818253149002034E2FFFF34ACFFFF09
+:106520000310582327A500102406000225EA0002C4
+:106530000062182400808021152000020000402104
+:106540008F480E1CA7AA0012056000372407000020
+:1065500030FF00FF001FCF008F8B001C0079382513
+:10656000AFA70014916F00853C08080091083D9189
+:106570003C18DFFF31EE00C0370AFFFF000E182B7A
+:106580003C1F080097FF3D8400EA6824A3A800117F
+:106590000003174001A248258FB90010AFA90014CD
+:1065A0003C0A0800914A3D93A7BF00168FA800142B
+:1065B000032CC0243C0B01003C0F0FFF030B1825DC
+:1065C0003147000335EEFFFF010C68240007160079
+:1065D000006EF8243C09700001A2C82503E9582583
+:1065E000AFB90014AFAB00100E000076A3A00015E9
+:1065F0008F8C0024260200089186000D30C40020F4
+:10660000108000068FBF001C3C05080094A53D804B
+:1066100024B0FFFF3C010800A4303D808FB000187B
+:1066200003E0000827BD00208F9800140118502BAC
+:106630005540FFC7240700010A000DB630FF00FFD8
+:106640009382000427BDFFE0AFBF00181040000F89
+:10665000008050218F880024240B00058F890008BA
+:10666000910700008F8400200100282130E3003FC3
+:106670008F86002C106B000800003821AFA9001095
+:106680000E00040EAFAA0014A38000048FBF0018F0
+:1066900003E0000827BD00208D1900183C0F0800FA
+:1066A0008DEF3D748F9800103C027FFF8D08001421
+:1066B000345FFFFF033F682401F8702101AE6023BF
+:1066C00001883821AFA900100E00040EAFAA0014F3
+:1066D0000A000E04A38000048F8700243C050800F4
+:1066E00094A53D923C0208008C423D8C90E6000D42
+:1066F0000005240030C300201060002C0044402519
+:106700008F85001C00006021240B000190A30085F0
+:1067100000004821240A00013C0F800035EE007083
+:106720008DC70000AF8700308F5801780700FFFE4B
+:106730003C038000347900708F3800003C0508006D
+:106740008CA500743C0D08008DAD00700307782304
+:1067500000AF38210000102100EF302B01A22021D2
+:10676000008618213C010800AC2700743C01080099
+:10677000AC230070AF4B01483C1908008F393D94A1
+:10678000A7490144A74A0146AF59014C3C0B0800F8
+:10679000916B3D91A34B0152AF4801543C0810004E
+:1067A000A74C015803E00008AF4801788F4B0E1C3E
+:1067B0003C0A08008D4A3D7497490E16974D0E14F9
+:1067C00001456021312AFFFF0A000E2731A9FFFF92
+:1067D0008F8300249064000D308200201040002937
+:1067E000000000000000482100005021000040216E
+:1067F0003C07800034EB00708D670000AF870030ED
+:106800008F4C01780580FFFE3C0D800035AC007098
+:106810008D8B00003C0508008CA500743C0408002A
+:106820008C8400700167302300A6782100001021BD
+:1068300001E6C82B0082C021031970213C01080029
+:10684000AC2F00743C010800AC2E0070AF49014829
+:106850003C0D08008DAD3D94A7480144240900403B
+:10686000A74A01463C081000240AFF91AF4D014C95
+:10687000A34A0152AF490154A740015803E0000860
+:10688000AF4801788F490E1897460E1297450E10A3
+:1068900030CAFFFF0A000E5D30A8FFFF8F8300247F
+:1068A00027BDFFF89064000D308200201040003AB0
+:1068B00000000000240B000100004821240A000110
+:1068C0003C088000350700708CE30000AF83003087
+:1068D0008F4C01780580FFFE3C0E80003C040800D0
+:1068E00090843DD035C700708CEC00003C0508005A
+:1068F0008CA50074A3A400033C1908008F39007014
+:106900008FAD00000183302300A638210000102144
+:106910000322782100E6C02B01F8602101AE40255A
+:10692000AFA800003C010800AC2700743C0108003F
+:10693000AC2C00709346010A3C04080090843DD1C1
+:10694000A3A00002A3A600018FA300003C0580FFC6
+:106950003099007F34A2FFFF006278240019C6003E
+:1069600001F87025240D3000AF4E014C27BD000802
+:10697000AF4D0154A7400158AF4B0148A74901440E
+:10698000A74A01463C091000240AFF80A34A01528D
+:1069900003E00008AF4901788F4B0E1897460E129E
+:1069A00097450E1030CAFFFF0A000E9130A9FFFF75
+:1069B0008F85001C2402008090A40085308300C0D5
+:1069C000106200058F8600208F8800088F87000CDA
+:1069D000ACC800C8ACC700C403E000080000000059
+:1069E0003C0A0800254A39543C09080025293A2068
+:1069F0003C08080025082DD43C07080024E73B3458
+:106A00003C06080024C637C43C05080024A5353CD4
+:106A10003C040800248431643C0308002463385C8F
+:106A20003C020800244236303C010800AC2A3D50AC
+:106A30003C010800AC293D4C3C010800AC283D4815
+:106A40003C010800AC273D543C010800AC263D64E5
+:106A50003C010800AC253D5C3C010800AC243D58DD
+:106A60003C010800AC233D683C010800AC223D60BD
+:086A700003E000080000000033
 :00000001FF
 /*
  * This file contains firmware data derived from proprietary unpublished
diff --git a/firmware/bnx2/bnx2-mips-09-6.0.17.fw.ihex b/firmware/bnx2/bnx2-mips-09-6.2.1.fw.ihex
index 7f39b4a7f33..68279b53e10 100644
--- a/firmware/bnx2/bnx2-mips-09-6.0.17.fw.ihex
+++ b/firmware/bnx2/bnx2-mips-09-6.2.1.fw.ihex
@@ -3,17 +3,17 @@
 :10002000000000380000565C080000A00800000036
 :100030000000574400005694080059200000008436
 :100040000000ADD808005744000001C00000AE5CBD
-:100050000800321008000000000090900000B01C62
-:100060000000000000000000000000000800909068
-:100070000000033C000140AC0800049008000400AC
-:10008000000012FC000143E8000000000000000036
-:1000900000000000080016FC00000004000156E407
-:1000A000080000A80800000000003D28000156E8F4
+:100050000800321008000000000092F80000B01CF8
+:10006000000000000000000000000000080092F8FE
+:100070000000033C00014314080004900800040041
+:10008000000012FC000146500000000000000000CB
+:1000900000000000080016FC000000040001594C9C
+:1000A000080000A80800000000003D280001595089
 :1000B00000000000000000000000000008003D28D3
-:0800C000000000300001941063
+:0800C0000000003000019678F9
 :0800C8000A00004600000000E0
-:1000D000000000000000000D636F6D362E302E31E1
-:1000E00037000000060011020000000000000003BD
+:1000D000000000000000000D636F6D362E322E31DF
+:1000E0000000000006020102000000000000000302
 :1000F000000000C800000032000000030000000003
 :1001000000000000000000000000000000000000EF
 :1001100000000010000001360000EA600000000549
@@ -1387,8 +1387,8 @@
 :1056800008001028080010748008010080080080BD
 :04569000800800008E
 :0C5694000A0000280000000000000000D8
-:1056A0000000000D6370362E302E313700000000F0
-:1056B00006001104000000000000000000000000CF
+:1056A0000000000D6370362E322E31000000000025
+:1056B00006020104000000000000000000000000DD
 :1056C000000000000000000038003C000000000066
 :1056D00000000000000000000000000000000020AA
 :1056E00000000000000000000000000000000000BA
@@ -2823,7 +2823,7 @@
 :0CB01000080049B808004C6408005050CB
 :04B01C000A000C8496
 :10B0200000000000000000000000000D7278703683
-:10B030002E302E3137000000060011030000000002
+:10B030002E322E3100000000060201030000000045
 :10B0400000000001000000000000000000000000FF
 :10B0500000000000000000000000000000000000F0
 :10B0600000000000000000000000000000000000E0
@@ -3624,10 +3624,10 @@
 :10E2100000000000000000000000000000000000FE
 :10E220000000000A000000000000000000000000E4
 :10E2300010000003000000000000000D0000000DB1
-:10E240003C020801244294003C03080124639634F4
+:10E240003C020801244296603C0308012463989C28
 :10E25000AC4000000043202B1480FFFD244200044A
 :10E260003C1D080037BD9FFC03A0F0213C100800B6
-:10E27000261032103C1C0801279C94000E001274DA
+:10E27000261032103C1C0801279C96600E0012BE2E
 :10E28000000000000000000D3C02800030A5FFFFF0
 :10E2900030C600FF344301803C0880008D0901B87E
 :10E2A0000520FFFE00000000AC6400002404000212
@@ -3639,7 +3639,7 @@
 :10E3000000062B0200051080004448210109182B4B
 :10E310001060001100000000910300002C6400094F
 :10E320005080000991190001000360803C0D080134
-:10E3300025AD9090018D58218D67000000E0000808
+:10E3300025AD92F8018D58218D67000000E000089E
 :10E340000000000091190001011940210109302B42
 :10E3500054C0FFF29103000003E000080000102108
 :10E360000A000CCC25080001910F0001240E000AC0
@@ -3660,16 +3660,16 @@
 :10E45000910400038D43000000072A0000A410254A
 :10E460003466000425080004AD42000C0A000CCC00
 :10E47000AD46000003E000082402000127BDFFE8CC
-:10E48000AFBF0014AFB000100E0015E50080802172
+:10E48000AFBF0014AFB000100E00167F00808021D7
 :10E490003C0480083485008090A600052403FFFE1C
 :10E4A0000200202100C310248FBF00148FB0001081
-:10E4B000A0A200050A0015EF27BD001827BDFFE840
+:10E4B000A0A200050A00168927BD001827BDFFE8A5
 :10E4C000AFB00010AFBF00140E000FD40080802149
 :10E4D0003C06800834C5008090A40000240200504F
 :10E4E000308300FF106200073C09800002002021F9
-:10E4F0008FBF00148FB00010AD2001800A0010A65D
+:10E4F0008FBF00148FB00010AD2001800A00108F74
 :10E5000027BD0018240801003C07800002002021DC
-:10E510008FBF00148FB00010ACE801800A0010A675
+:10E510008FBF00148FB00010ACE801800A00108F8C
 :10E5200027BD001827BDFF783C058008AFBE0080DE
 :10E53000AFB7007CAFB3006CAFB10064AFBF008475
 :10E54000AFB60078AFB50074AFB40070AFB200687A
@@ -3682,7 +3682,7 @@
 :10E5B000AFA0005090CD00002406002031A400FF41
 :10E5C00010860018240E0050108E009300000000EA
 :10E5D0003C1008008E1000DC260F00013C010800F2
-:10E5E000AC2F00DC0E00165E000000000040182179
+:10E5E000AC2F00DC0E0016F80000000000401821DF
 :10E5F0008FBF00848FBE00808FB7007C8FB60078FD
 :10E600008FB500748FB400708FB3006C8FB2006848
 :10E610008FB100648FB000600060102103E000083B
@@ -3709,15 +3709,15 @@
 :10E760008FB200688FB100648FB00060006010212C
 :10E7700003E0000827BD00880E000D2800002021BE
 :10E780000A000D75004018210A000D9500C02021D7
-:10E790000E0016AE02C020211440FFE10000000070
+:10E790000E00174802C020211440FFE100000000D5
 :10E7A0003C0B8008356400808C8A003402CA482300
 :10E7B0000520001D000000003C1E08008FDE310017
 :10E7C00027D700013C010800AC3731001260000679
 :10E7D000024020213C1408008E9431F42690000160
-:10E7E0003C010800AC3031F40E0015E53C1E8008F9
+:10E7E0003C010800AC3031F40E00167F3C1E80085E
 :10E7F00037CD008091B700250240202136EE00047D
-:10E800000E0015EFA1AE00250E000CAC0240202139
-:10E810000A000DCA240300013C17080126F794F8EA
+:10E800000E001689A1AE00250E000CAC024020219E
+:10E810000A000DCA240300013C17080126F797607F
 :10E820000A000D843C1F80008C86003002C66023E5
 :10E830001980000C2419000C908F004F3C14080024
 :10E840008E94310032B500FC35ED0001268E0001BA
@@ -3728,25 +3728,25 @@
 :10E8900000B410233044FFFFAFA4005832A8000298
 :10E8A0001100002E32AB00103C15800836B00080FD
 :10E8B0009216000832D30040526000FB8EE200083E
-:10E8C0000E0015E502402021240A0018A20A0009C2
+:10E8C0000E00167F02402021240A0018A20A000927
 :10E8D000921100052409FFFE024020210229902404
-:10E8E0000E0015EFA21200052404003900002821B3
-:10E8F0000E001689240600180A000DCA2403000120
+:10E8E0000E001689A2120005240400390000282118
+:10E8F0000E001723240600180A000DCA2403000185
 :10E9000092FE000C3C0A800835490080001EBB00C6
 :10E910008D27003836F10081024020213225F08118
 :10E920000E000C9B30C600FF0A000DC10000000065
 :10E930003AA7000130E300011460FFA402D4B02123
-:10E940000A000E1D00000000024020210E0016CB20
+:10E940000A000E1D00000000024020210E00176585
 :10E95000020028210A000D75004018211160FF7087
 :10E960003C0F80083C0D800835EE00808DC40038D7
 :10E970008FA300548DA60004006660231D80FF68ED
 :10E98000000000000064C02307020001AFA400548F
 :10E990003C1F08008FFF31E433F9000113200015FC
 :10E9A0008FAC00583C07800094E3011A10600012FD
-:10E9B0003C0680080E0020F8024020213C0308019C
-:10E9C0009063952930640002148001450000000026
+:10E9B0003C0680080E002192024020213C03080101
+:10E9C00090639791306400021480014500000000BC
 :10E9D000306C0004118000078FAC0058306600FBDB
-:10E9E0003C010801A026952932B500FCAFA00058D3
+:10E9E0003C010801A026979132B500FCAFA0005869
 :10E9F0008FAC00583C06800834D30080AFB40018B8
 :10EA0000AFB60010AFAC00143C088000950B01209D
 :10EA10008E6F0030966A005C8FA3005C8FBF003061
@@ -3773,7 +3773,7 @@
 :10EB600001F1302318C00097264800803C070800B8
 :10EB70008CE731E42404FF80010418243118007F5D
 :10EB80003C1F80003C19800430F10001AFE300908D
-:10EB900012200006031928213C03080190639529DF
+:10EB900012200006031928213C0308019063979175
 :10EBA00030690008152000C6306A00F73C10800864
 :10EBB00036040080908C004F318B000115600042BC
 :10EBC000000000003C0608008CC6319830CE0010D2
@@ -3786,2697 +3786,2735 @@
 :10EC30008C67000002C7782319E000978FBF00544B
 :10EC4000AC93002024130001AC760000AFB3005059
 :10EC5000AC7F000417C0004E000000008FA90050D8
-:10EC60001520000B000000003C030801906395296B
+:10EC60001520000B000000003C0308019063979101
 :10EC7000306A00011140002E8FAB0058306400FE56
-:10EC80003C010801A02495290A000D7500001821F7
+:10EC80003C010801A02497910A000D75000018218D
 :10EC90000E000CAC024020210A000F1300000000FF
 :10ECA0000A000E200000A0210040F80924040017EB
 :10ECB0000A000DCA240300010040F80924040016CC
 :10ECC0000A000DCA240300019094004F240DFFFE9A
 :10ECD000028D2824A085004F30F900011320000682
-:10ECE0003C0480083C03080190639529307F0010A4
+:10ECE0003C0480083C03080190639791307F00103A
 :10ECF00017E00051306800EF34900080240A0001D2
-:10ED0000024020210E0015E5A60A001292030025FC
+:10ED0000024020210E00167FA60A00129203002561
 :10ED100024090001AFA90050346200010240202103
-:10ED20000E0015EFA20200250A000EF93C0D800826
+:10ED20000E001689A20200250A000EF93C0D80088B
 :10ED30001160FE83000018218FA5003030AC000464
 :10ED40001180FE2C8FBF00840A000DCB240300012C
 :10ED500027A500380E000CB6AFA000385440FF4382
 :10ED60008EE200048FB40038329001005200FF3F61
 :10ED70008EE200048FA3003C8E6E0058006E682364
 :10ED800005A3FF39AE6300580A000E948EE200041A
-:10ED90000E0015E5024020213C0380083468008005
-:10EDA000024020210E0015EFA11E000903C03021F2
-:10EDB000240400370E001689000028210A000F11D4
+:10ED90000E00167F024020213C038008346800806A
+:10EDA000024020210E001689A11E000903C0302157
+:10EDB000240400370E001723000028210A000F1139
 :10EDC0008FA900508FAB00185960FF8D3C0D800853
-:10EDD0000E0015E502402021920C002524050001BB
-:10EDE000AFA5005035820004024020210E0015EF2F
+:10EDD0000E00167F02402021920C00252405000120
+:10EDE000AFA5005035820004024020210E00168994
 :10EDF000A20200250A000EF93C0D800812240059D9
 :10EE00002A2300151060004D240900162408000C68
 :10EE10005628FF2732B000013C0A8008914C001BA5
 :10EE20002406FFBD241E000E01865824A14B001BA2
-:10EE30000A000EA532B000013C010801A028952966
+:10EE30000A000EA532B000013C010801A0289791FC
 :10EE40000A000EF93C0D80088CB500308EFE0008DB
 :10EE50002404001826B6000103C0F809ACB600303F
-:10EE60003C030801906395293077000116E0FF818B
+:10EE60003C030801906397913077000116E0FF8121
 :10EE7000306A00018FB200300A000D753243000481
 :10EE80003C1080009605011A50A0FF2B34C60010DC
 :10EE90000A000EC892EE000C8C6200001456FF6D42
 :10EEA000000000008C7800048FB9005403388823D8
 :10EEB0000621FF638FBF00540A000F0E0000000000
-:10EEC0003C010801A02A95290A000F3030F9000101
+:10EEC0003C010801A02A97910A000F3030F9000197
 :10EED0001633FF028FAF00240A000EB0241E00106C
-:10EEE0000E0015E5024020213C0B800835680080AB
+:10EEE0000E00167F024020213C0B80083568008010
 :10EEF00091090025240A0001AFAA0050353300040F
-:10EF0000024020210E0015EFA11300253C05080149
-:10EF100090A5952930A200FD3C010801A022952969
+:10EF0000024020210E001689A11300253C050801AE
+:10EF100090A5979130A200FD3C010801A022979195
 :10EF20000A000E6D004018212411000E53D1FEEA94
 :10EF3000241E00100A000EAF241E00165629FEDC07
 :10EF400032B000013C0A8008914C001B2406FFBD32
 :10EF5000241E001001865824A14B001B0A000EA598
 :10EF600032B000010A000EA4241E00123C038000EF
 :10EF70008C6201B80440FFFE24040800AC6401B8B0
-:10EF800003E00008000000000080502130A5FFFFD2
-:10EF900030C6FFFF3C0480008C8201B80440FFFEB5
-:10EFA00034880180AD0A00003C078008AC8A00204C
-:10EFB00094E300483067FFFF10E000423C0D800002
-:10EFC00024AB001200EB482B5120003F2404000327
-:10EFD00034820100945900208F8900002404001A13
-:10EFE0003338FFFF270BFFFE00EB782B39EE0001D3
-:10EFF00000096B8201AE6024A104000B518000491E
-:10F000008F8B00048F830004A50B0014346800016B
-:10F01000AF88000430CE004015C000333C048000AF
-:10F020003C02800034420180A445000E3C07800071
-:10F0300034EC0180A585001A8F85000C310B80000F
+:10EF800003E000080000000030A5FFFF30C6FFFFCF
+:10EF90003C0780008CE201B80440FFFE34EA0180A7
+:10EFA000AD440000ACE400203C0480089483004899
+:10EFB0003068FFFF11000016AF88000824AB001274
+:10EFC000010B482B512000133C04800034EF01005A
+:10EFD00095EE00208F890000240D001A31CCFFFF30
+:10EFE00031274000A14D000B10E000362583FFFEC5
+:10EFF0000103C02B170000348F9900048F88000490
+:10F00000A5430014350700010A001003AF87000470
+:10F010003C04800024030003348201808F890000B7
+:10F020008F870004A043000B3C088000350C018052
+:10F03000A585000EA585001A8F85000C30EB800099
 :10F04000A5890010AD850028A58600081160000F75
-:10F050008F85001434EA0100954E001631CDFFFC77
-:10F0600025A40004008718218C67400030E6FFFFCC
-:10F0700014C000073C0480003C18FFFF370F7FFFDF
-:10F08000010F4024AF8800048F8500143C048000E9
-:10F090002402BFFF348301800102C824A479002622
-:10F0A00010A00004AC69002C00054402A465001007
-:10F0B000A46800263C091000AC8901B803E00008F0
-:10F0C000000000002404000335AC018030CE004075
-:10F0D0008F8900008F880004A184000B51C0FFD1EC
-:10F0E0003C0280003C048000AC8A00203C0F800879
-:10F0F00095EA00403143FFFF5060000834820180F0
-:10F1000000A3C02B5700000100A0182134990180F2
-:10F11000A723000E0A0010053C0780000A00100318
-:10F1200030C6FFBF2407FFFE016740240A000FFE20
-:10F13000AF88000427BDFFE88FA2002830A5FFFF9D
-:10F1400030C6FFFFAFBF0010AF87000CAF820014C6
-:10F15000AF8000040E000FDBAF8000008FBF0010F7
-:10F1600027BD001803E00008AF8000143C068000B3
-:10F1700034C4007034C701008C8A000090E500128E
-:10F180008F84000027BDFFF030A300FF000318822A
-:10F190003082400010400037246500030005C8801D
-:10F1A0000326C0218F0E4000246F0004000F6880EA
-:10F1B000AFAE000001A660218D8B4000AFAB000414
-:10F1C00094E900163128FFFC010638218CE6400046
-:10F1D000AFA600088FA900080000302100002821F8
-:10F1E0003C07080024E701000A00107E24080008FC
-:10F1F0009059000024A500012CAC000C0079C0211E
-:10F200000018788001E770218DCD00001180000684
-:10F2100000CD302603A5102114A8FFF500051A0023
-:10F220005520FFF4905900003C04800034870070A2
-:10F230003C0508008CA531048CE300002CA20020C2
-:10F2400010400009006A3823000548803C0B080084
-:10F25000256B3108012B402124AA0001AD070000D5
-:10F260003C010800AC2A310400C0102103E0000872
-:10F2700027BD0010308220001040000B0005588090
-:10F28000016648218D24400024680004000838806D
-:10F29000AFA4000000E618218C654000AFA0000874
-:10F2A0000A00106EAFA500040000000D0A00106FE8
-:10F2B0008FA9000827BDFFD83C058000AFB100141E
-:10F2C000AFB00010AFBF0024AFB40020AFB3001C3C
-:10F2D000AFB200188F87000034A401009483000EA1
-:10F2E00030E2400000008021104000103071FFFF2C
-:10F2F0003C08002000E8302410C0000D30EB8000F6
-:10F300008F890004240ABFFF00EA38243523100047
-:10F31000AF87000030F320001660000B3C1800049B
-:10F320002419FFBF0A0010CF0079102430EB8000B1
-:10F330001560004D3C0D002030F320001260FFF8F6
-:10F340008F8300043C18000400F8A0241280FFF50D
-:10F350002419FFBF3462004030FF010013E00010A9
-:10F36000AF8200048F820028104000063C0E80000F
-:10F370003C04002000E41824146000CE3C06000485
-:10F380003C0E800035CD010095AC001E95AB001CF5
-:10F390003189FFFF000B5400012A4025AF88000C83
-:10F3A0003C138000367401009692000C8E6340007E
-:10F3B000340FFFFF106F00843244FFFF30780100EC
-:10F3C000570000012410001030F9100053200008ED
-:10F3D0003612000130FF002017E000733C031000DC
-:10F3E00000E310241440006A3C0A0C0036120001AD
-:10F3F00030EC01001580000B3C0600018F880004F2
-:10F40000310D400015A0000800E628243C131F0120
-:10F4100000F378243C0E100011EE00AE3094020090
-:10F420003C06000100E6282410A000193C19100039
-:10F430003C0408008C84002430940002168000D91B
-:10F44000240300018FBF00248FB400208FB3001C61
-:10F450008FB200188FB100148FB00010006010211F
-:10F4600003E0000827BD002800ED60241180FFB3F1
-:10F4700030F320008F8E00043C12FFFF364F7FFFD9
-:10F4800000EF382435C380000A0010BEAF870000AB
-:10F4900000F9C0241700004E00002021AF800010AA
-:10F4A0003C0380003465010094AE000E8F91001083
-:10F4B00031CAFFFF108000C62553000430EF010061
-:10F4C00015E000703C180F003A2800022E7003EF80
-:10F4D0002D1900013A1F0001033F282414A0002227
-:10F4E000240400013C0308008C6300D02E25000C8E
-:10F4F000001121C0386C00012D8B00010165102422
-:10F50000144000143270FFFF262DFFFC2DA40004D0
-:10F510001480010300002021386A00022D460001FA
-:10F5200000C51824546000FF02002821262FFFF890
-:10F530002DEE000415C00007000000000007A242E5
-:10F540000011C02B0298482415200109020028212F
-:10F55000001121C002002821364600020E000FDBF8
-:10F560000000000000002021008018218FBF00242F
-:10F570008FB400208FB3001C8FB200188FB100141D
-:10F580008FB000100060102103E0000827BD0028A4
-:10F590003C090BFF00EA40243526FFFF00C8282B5A
-:10F5A00050A0FF93361200013C0B08008D6B002C1D
-:10F5B00036120005257000013C010800AC30002C1B
-:10F5C0000A0010F630EC01000A0010EB24100020B5
-:10F5D00000071602305F000F001F80C03C030801C7
-:10F5E00024639478020320211080FFADAF9F0010A8
-:10F5F000908800005100FFAB3C0380003C0D800070
-:10F6000035A90100952C000E240B00030240302187
-:10F61000318AFFFF25450004110B00D9000050215D
-:10F620009088000124140002311100FF123400BF41
-:10F6300030F80040310300FF24080001106800C8C2
-:10F6400030E200408C8A00048F8B00245560000655
-:10F6500034C60002254DFE002DAC0381558000010B
-:10F660003646004034C600020140202130A5FFFF8D
-:10F670000E000FDB30C6FFFF000040210A00110A18
-:10F680000100182100F8A0243C0902001289FF8F14
-:10F690003A28000290B100133270FFFF02002821C7
-:10F6A000322700FF24F30004001321C00A00115088
-:10F6B0003646000200E6282414A0FF323C0E8000EB
-:10F6C0000E0010543C1380008F8700000A0010E2E7
-:10F6D000AF82000C1680FF533C0600012624000474
-:10F6E0003085FFFF364600023C0380008C7101B874
-:10F6F0000620FFFE8F890008346A0180AD400000BB
-:10F70000112000B23C0D800024B800120138902B6B
-:10F71000124000AF240C0003347001009603002057
-:10F720002402001A30F94000307FFFFFA142000B95
-:10F73000132000AB27E3FFFE0123582B156000A91F
-:10F740002409FFFE35080001A5430014AF8800041A
-:10F750003C0E80002413BFFF0113782435C80180BC
-:10F76000A505000EA505001AA5060008A50F002690
-:10F77000A50700103C071000ADC701B80000182114
-:10F780008FBF00248FB400208FB3001C8FB20018ED
-:10F790008FB100148FB000100060102103E000084A
-:10F7A00027BD00283C1208008E5200D802202821D4
-:10F7B00024040080265100013C010800AC3100D82F
-:10F7C0000E000FDB240600030A0011D900001821E7
-:10F7D0008C65400030B1010012200046325900040F
-:10F7E0003C1F08008FFF002424140004172000028F
-:10F7F00033F0000D2414000200076AC239A400018E
-:10F800002E6C03EF30820001398B0001004B402544
-:10F81000110000033251FFFB2412FFFB021280246F
-:10F8200030E3010050600015321F00013C0A0F0058
-:10F8300000EA30243C07020010C7000F3C1980008A
-:10F840003725010090A900132418FFFE0218802418
-:10F85000312F00FF25EE0004000E21C0120000022F
-:10F86000023430253226FFFF0E000FDB3265FFFF2A
-:10F870001200FF3D00002021321F000113E0000DA7
-:10F88000320B000424080001120800020234302563
-:10F890003226FFFF000020210E000FDB3265FFFF44
-:10F8A0002402FFFE020280241200FF2F000020210C
-:10F8B000320B00045160000D240400010234302595
-:10F8C00024140004561400013226FFFF2411FFFB0C
-:10F8D0003265FFFF240401000E000FDB02119824A3
-:10F8E0001260FF2100002021240400010A001154AD
-:10F8F000008018213C0C08008D8C00243190000100
-:10F900005200FF19000020213265FFFF3646000239
-:10F910000E000FDB000020210A00115300002021FF
-:10F92000020028210A00115036460002130000068A
-:10F930000000000095300010949F000232190FFF64
-:10F9400013F9FF3D310300FF3C04080190849479D2
-:10F950001080FF3D240800010A00110A010018214F
-:10F960005040FF398C8A00040A00124B000000004E
-:10F970000E000FDB3246FFFB0A00114E001121C0C2
-:10F9800090830001240E0001106EFF3C240800014A
-:10F99000240F0002106F000430F30040240800011F
-:10F9A0000A00110A010018215260FFFD240800011D
-:10F9B000952500109487000230A9FFFF50E9FEA1B1
-:10F9C000010018210A00126124080001240C000320
-:10F9D00035AA0180A14C000B0A0011CE3C0E80001C
-:10F9E0002409FFFE0A0011CC0109402427BDFFC0F5
-:10F9F000AFB00018AFBF003C3C10600CAFBE003889
-:10FA0000AFB70034AFB60030AFB5002CAFB40028AC
-:10FA1000AFB30024AFB20020AFB1001C8E0E500077
-:10FA2000240FFF7F3C06800001CF682435AC380CE2
-:10FA3000240B0003AE0C5000ACCB00083C010800C6
-:10FA4000AC2000200E0017B0000000003C0A00109F
-:10FA5000354980513C066016AE09537C8CC70000C6
-:10FA60003C0860148D0500A03C03FFFF00E3202448
-:10FA70003C02535300051FC21082029B34C57C0018
-:10FA80008CBF007C8CA200783C1E600037C4202014
-:10FA90003C05080124A590C0AF820018AF9F001C50
-:10FAA0000E0016742406000A3C19000127399478C8
-:10FAB0003C010800AC3931DC0E00206BAF80001433
-:10FAC0008FD708082418FFF03C15570902F8B02416
-:10FAD00012D5028B24040001AF8000283C14800062
-:10FAE0003697010002E0F0218E90000032050003FD
-:10FAF00010A0FFFD3207000114E0005D3206000295
-:10FB000010C0FFF93C07800034E501408CB90000CB
-:10FB100024100040ACF9002090B8000833030070B6
-:10FB20001070010B286900411120000824080060B2
-:10FB3000241F0020107F000E3C0B40003C0680007C
-:10FB4000ACCB01780A0012B3000000001468FFFB80
-:10FB50003C0B40000E001F88000000003C0B4000E2
-:10FB60003C068000ACCB01780A0012B30000000014
-:10FB700090AB0009241100048CA70000316800FF3D
-:10FB80001111015D2512FFFA2E53000612600016B6
-:10FB90003C0680008CAA00048F86002494A3000AEF
-:10FBA000000A3E02310500FF10C000053064FFFF6F
-:10FBB0002CEC00081580000224E700042407000351
-:10FBC000240E000910AE01A128AF000A11E0018443
-:10FBD0002410000A2404000810A4001A000749C0D9
-:10FBE000012038213C0680008CD001B80600FFFEC1
-:10FBF00034C40180AC87000034C5014090B60008D1
-:10FC0000241900023C0B400032C200FF00028A00AF
-:10FC10000228F825A49F0008A099000B94A7000AC9
-:10FC20003C081000A48700108CB80004AC98002495
-:10FC3000ACC801B83C068000ACCB01780A0012B316
-:10FC400000000000000AC202330300FF2405000187
-:10FC50005465FFE4012038218F990020AF830024F0
-:10FC600027270001AF8700200A0012F20120382167
-:10FC70008FD100283C0B8008AE9100208FC6000475
-:10FC80008FCA000095690048AF860000AF8A000463
-:10FC90003128FFFF0E000FD4AF8800083C03080096
-:10FCA0008C6300C0106000258F8700003C0E0800A8
-:10FCB0008DCE00C425CD00013C010800AC2D00C450
-:10FCC0003C1F800037E901008D3900243C0760208B
-:10FCD000ACF90014000000003C0680003C08400025
-:10FCE000ACC80138000000005220FF853206000237
-:10FCF000262D0140262E00802404FF8001A4282404
-:10FD000001C47824000F194031CC007F00059940D0
-:10FD100031B2007F3C15200036A20002006C502555
-:10FD20000272B02502C2882501425825ACCB0830AA
-:10FD3000ACD108300A0012B9320600023C120010A1
-:10FD400000F2782415E000708F8300043C1808004E
-:10FD50008F18002097D6000E30F5400027130001C1
-:10FD60003C010800AC3300200000902112A000816B
-:10FD700032D3FFFF3C1F002000FFC8241320007E69
-:10FD800030E580008F8200042404BFFF00E43824A3
-:10FD900034431000AF87000030EB20001160007387
-:10FDA000240EFFBF3C0D000400ED60241180000212
-:10FDB000006E10243462004030EF010011E00010AA
-:10FDC000AF8200048F95002812A000073C18002085
-:10FDD00000F8B02412C000043C1F000400FFC82437
-:10FDE0001320016D0000000096E3001E96E8001C41
-:10FDF0003065FFFF0008140000A22025AF84000C2E
-:10FE000096EA000C8E8440003409FFFF10890085BB
-:10FE10003145FFFF3086010054C00001241200105C
-:10FE200030EB1000116000133656000130EC00205A
-:10FE30001580000A3C0E100000EE682411A0000D91
-:10FE40003C190C003C180BFF00F9B0243715FFFFDC
-:10FE500002B6782B11E00007365600013C1F08005F
-:10FE60008FFF002C3656000527F200013C010800E8
-:10FE7000AC32002C30E401001480000B3C06000181
-:10FE80008F880004310240005440000800E6282416
-:10FE90003C0A1F0100EA48243C0310001123010919
-:10FEA00030A602003C06000100E6282410A0003E17
-:10FEB0003C1810003C0D08008DAD002431AC000250
-:10FEC0001580000624030001006010211040FF830C
-:10FED0003C0680000A00132A3C1F80003C0F0800EB
-:10FEE0008DEF00D8026028212404008025EE000157
-:10FEF0003C010800AC2E00D80E000FDB24060003E6
-:10FF00000A0013AB000018212405BFFF0065682418
-:10FF100011A00007240F87FF006F702415C0000890
-:10FF20003C18006000F8202410800005000000004C
-:10FF30000E000D42000000000A0013AC000000009B
-:10FF40000E00159C000000000A0013AC0000000029
-:10FF50000E0015F4000000003C0B40003C06800041
-:10FF6000ACCB01780A0012B3000000000A0013674E
-:10FF7000006E102430E5800010A0FF878F830004FE
-:10FF80003C08002000E818245060FF838F830004A1
-:10FF90008F8900043C06FFFF34CA7FFF00EA382443
-:10FFA0000A00135E3523800000F8A82416A0001F65
-:10FFB00000004021AF8000103C0380003464010049
-:10FFC0009486000E8F93001030C5FFFF1100014E84
-:10FFD00024B5000430EA0100114000553A7F0002C8
-:10FFE0003C0E0F0000EE68243C0C020011AC0051E6
-:10FFF0002EB203EF908F001332B2FFFF31E400FF07
+:10F050008F85001435190100972A00163158FFFCDE
+:10F06000270F000401E870218DCD400031A6FFFF7D
+:10F0700014C000072403BFFF3C02FFFF34487FFF9A
+:10F0800000E83824AF8700048F8500142403BFFFF5
+:10F090003C04800000E3582434830180A46B0026E4
+:10F0A000AC69002C10A0000300054C02A465001000
+:10F0B000A46900263C071000AC8701B803E00008F3
+:10F0C000000000008F990004240AFFFE032A382460
+:10F0D0000A001003AF87000427BDFFE88FA20028B5
+:10F0E00030A5FFFF30C6FFFFAFBF0010AF87000C99
+:10F0F000AF820014AF8000040E000FDBAF80000071
+:10F100008FBF001027BD001803E00008AF80001477
+:10F110003C06800034C4007034C701008C8A0000B3
+:10F1200090E500128F84000027BDFFF030A300FFA0
+:10F13000000318823082400010400037246500032D
+:10F140000005C8800326C0218F0E4000246F0004F4
+:10F15000000F6880AFAE000001A660218D8B4000DB
+:10F16000AFAB000494E900163128FFFC01063821FA
+:10F170008CE64000AFA600088FA9000800003021EF
+:10F18000000028213C07080024E701000A0010675E
+:10F19000240800089059000024A500012CAC000CA4
+:10F1A0000079C0210018788001E770218DCD000022
+:10F1B0001180000600CD302603A5102114A8FFF50C
+:10F1C00000051A005520FFF4905900003C0480000F
+:10F1D000348700703C0508008CA531048CE30000E6
+:10F1E0002CA2002010400009006A38230005488046
+:10F1F0003C0B0800256B3108012B402124AA00019B
+:10F20000AD0700003C010800AC2A310400C0102109
+:10F2100003E0000827BD0010308220001040000BE2
+:10F2200000055880016648218D24400024680004B0
+:10F2300000083880AFA4000000E618218C6540006B
+:10F24000AFA000080A001057AFA500040000000D91
+:10F250000A0010588FA9000827BDFFE03C07800076
+:10F2600034E60100AFBF001CAFB20018AFB100140C
+:10F27000AFB0001094C5000E8F87000030A4FFFFD0
+:10F280002483000430E2400010400010AF83002CC3
+:10F290003C09002000E940241100000D30EC800002
+:10F2A0008F8A0004240BBFFF00EB38243543100085
+:10F2B000AF87000030F220001640000B3C1900041C
+:10F2C000241FFFBF0A0010B7007F102430EC80001D
+:10F2D000158000423C0E002030F220001240FFF862
+:10F2E0008F8300043C19000400F9C0241300FFF5CB
+:10F2F000241FFFBF34620040AF82000430E20100EF
+:10F300001040001130F010008F83003010600006B4
+:10F310003C0F80003C05002000E52024148000C044
+:10F320003C0800043C0F800035EE010095CD001E26
+:10F3300095CC001C31AAFFFF000C5C00014B482556
+:10F34000AF89000C30F010001200000824110001F9
+:10F3500030F100201620008B3C18100000F890249B
+:10F36000164000823C040C002411000130E801002A
+:10F370001500000B3C0900018F85000430A94000F6
+:10F38000152000073C0900013C0C1F0100EC58242B
+:10F390003C0A1000116A01183C1080003C09000171
+:10F3A00000E9302410C000173C0B10003C18080086
+:10F3B0008F1800243307000214E0014024030001E9
+:10F3C0008FBF001C8FB200188FB100148FB00010D7
+:10F3D0000060102103E0000827BD002000EE682433
+:10F3E00011A0FFBE30F220008F8F00043C11FFFF00
+:10F3F00036307FFF00F0382435E380000A0010A685
+:10F40000AF87000000EB102450400065AF8000285B
+:10F410008F8C00303C0D0F0000ED18241580008803
+:10F42000AF83001030E8010011000086938F0010B8
+:10F430003C0A0200106A00833C1280003650010032
+:10F44000920500139789002E3626000230AF00FF88
+:10F4500025EE0004000E19C03C0480008C9801B811
+:10F460000700FFFE34880180AD0300003C198008CE
+:10F47000AC830020973100483225FFFF10A0015CCB
+:10F48000AF8500082523001200A3F82B53E0015993
+:10F490008F850004348D010095AC00202402001AF1
+:10F4A00030E44000318BFFFFA102000B108001927D
+:10F4B0002563FFFE00A3502B154001908F8F0004A1
+:10F4C000A50300148F88000435050001AF850004F2
+:10F4D0003C08800035190180A729000EA729001AD1
+:10F4E0008F89000C30B18000A7270010AF290028B9
+:10F4F000A72600081220000E3C04800035020100FF
+:10F50000944C0016318BFFFC256400040088182100
+:10F510008C7F400033E6FFFF14C000053C048000F0
+:10F520003C0AFFFF354D7FFF00AD2824AF85000466
+:10F53000240EBFFF00AE402434850180A4A800261D
+:10F54000ACA7002C3C071000AC8701B800001821C4
+:10F550008FBF001C8FB200188FB100148FB0001045
+:10F560000060102103E0000827BD00203C020BFFD3
+:10F5700000E41824345FFFFF03E3C82B5320FF7B14
+:10F58000241100013C0608008CC6002C24C5000193
+:10F590003C010800AC25002C0A0010D42411000501
+:10F5A0008F85002810A0002FAF80001090A30000CE
+:10F5B000146000792419000310A0002A30E601002D
+:10F5C00010C000CC8F860010241F000210DF00C97D
+:10F5D0008F8B000C3C0708008CE7003824E4FFFF09
+:10F5E00014E0000201641824000018213C0D0800FA
+:10F5F00025AD0038006D1021904C00048F85002C43
+:10F6000025830004000321C030A5FFFF3626000239
+:10F610000E000FDB000000000A00114D0000182151
+:10F6200000E8302414C0FF403C0F80000E00103D65
+:10F63000000000008F8700000A0010CAAF82000C93
+:10F64000938F00103C180801271896E0000F90C017
+:10F6500002588021AF9000288F85002814A0FFD386
+:10F66000AF8F00103C0480008C86400030C5010044
+:10F6700010A000BC322300043C0C08008D8C002438
+:10F6800024120004106000C23190000D3C04800080
+:10F690008C8D40003402FFFF11A201003231FFFBCC
+:10F6A0008C884000310A01005540000124110010EF
+:10F6B00030EE080011C000BE2419FFFB8F98002C0B
+:10F6C0002F0F03EF51E000010219802430E90100FF
+:10F6D00011200014320800018F87003014E000FB75
+:10F6E0008F8C000C3C05800034AB0100917F00132F
+:10F6F00033E300FF246A00042403FFFE0203802496
+:10F70000000A21C012000002023230253226FFFF1B
+:10F710000E000FDB9785002E1200FF290000182134
+:10F72000320800011100000D32180004240E0001FF
+:10F73000120E0002023230253226FFFF9785002E7E
+:10F740000E000FDB00002021240FFFFE020F80249B
+:10F750001200FF1B00001821321800045300FF188C
+:10F760002403000102323025241200045612000145
+:10F770003226FFFF9785002E0E000FDB24040100C8
+:10F780002419FFFB021988241220FF0D0000182104
+:10F790000A0010E9240300011079009C00003021C8
+:10F7A00090AD00012402000211A200BE30EA004028
+:10F7B00090B90001241800011338007F30E900409F
+:10F7C0008CA600049785002E00C020210E000FDBC0
+:10F7D0003626000200004021010018218FBF001CC6
+:10F7E0008FB200188FB100148FB00010006010218C
+:10F7F00003E0000827BD0020360F010095EE000C45
+:10F8000031CD020015A0FEE63C0900013C1880083D
+:10F81000971200489789002E362600023248FFFFD3
+:10F82000AF8800083C0380008C7101B80620FFFE01
+:10F83000346A0180AD4000001100008E3C0F800052
+:10F84000253F0012011FC82B1320008B240E00033C
+:10F85000346C0100958B00202402001A30E4400033
+:10F860003163FFFFA142000B108000A72463FFFE5D
+:10F870000103682B15A000A52408FFFE34A5000194
+:10F88000A5430014AF8500043C0480002412BFFF90
+:10F8900000B2802434850180A4A9000EA4A9001A16
+:10F8A000A4A60008A4B00026A4A700103C071000DE
+:10F8B000AC8701B80A00114D000018213C038000FC
+:10F8C00034640100949F000E3C1908008F3900D861
+:10F8D0002404008033E5FFFF273100013C010800CC
+:10F8E000AC3100D80E000FDB240600030A00114DD6
+:10F8F00000001821240A000210CA00598F85002C2C
+:10F900003C0308008C6300D0240E0001106E005EE2
+:10F910002CCF000C24D2FFFC2E5000041600002136
+:10F9200000002021241800021078001B2CD9000CA4
+:10F9300024DFFFF82FE900041520FF330000202109
+:10F9400030EB020051600004000621C054C00022C8
+:10F9500030A5FFFF000621C030A5FFFF0A00117D82
+:10F96000362600023C0908008D29002431300001B0
+:10F970005200FEF7000018219785002E362600025F
+:10F980000E000FDB000020210A00114D000018219D
+:10F990000A00119C241200021320FFE624DFFFF866
+:10F9A0000000202130A5FFFF0A00117D362600024D
+:10F9B0000A0011AC021980245120FF828CA6000499
+:10F9C0003C05080190A596E110A0FF7E24080001E7
+:10F9D0000A0011F0010018210E000FDB3226000191
+:10F9E0008F8600108F85002C0A00124F000621C060
+:10F9F0008F8500043C18800024120003371001801A
+:10FA0000A212000B0A00112E3C08800090A30001F6
+:10FA1000241100011071FF70240800012409000264
+:10FA20005069000430E60040240800010A0011F08B
+:10FA30000100182150C0FFFD240800013C0C80008B
+:10FA4000358B01009563001094A40002307FFFFF06
+:10FA5000509FFF62010018210A001284240800014F
+:10FA60002CA803EF1100FE56240300010A001239EE
+:10FA700000000000240E000335EA0180A14E000BB7
+:10FA80000A00121C3C04800011E0FFA2000621C005
+:10FA900030A5FFFF0A00117D362600020A0011A5DD
+:10FAA000241100201140FFC63C1280003650010096
+:10FAB000960F001094AE000231E80FFF15C8FFC08A
+:10FAC000000000000A0011E690B900013C060800A1
+:10FAD0008CC6003824C4FFFF14C00002018418241F
+:10FAE000000018213C0D080025AD0038006D1021E4
+:10FAF0000A0011B6904300048F8F0004240EFFFE0D
+:10FB00000A00112C01EE28242408FFFE0A00121A14
+:10FB100000A8282427BDFFC8AFB00010AFBF003435
+:10FB20003C10600CAFBE0030AFB7002CAFB6002861
+:10FB3000AFB50024AFB40020AFB3001CAFB20018C3
+:10FB4000AFB100148E0E5000240FFF7F3C068000E2
+:10FB500001CF682435AC380C240B0003AE0C5000E8
+:10FB6000ACCB00083C010800AC2000200E00184A75
+:10FB7000000000003C0A0010354980513C06601628
+:10FB8000AE09537C8CC700003C0860148D0500A0B2
+:10FB90003C03FFFF00E320243C02535300051FC237
+:10FBA0001482000634C57C000003A08002869821E0
+:10FBB0008E7200043C116000025128218CBF007C31
+:10FBC0008CA200783C1E600037C420203C05080150
+:10FBD00024A59328AF820018AF9F001C0E00170EBB
+:10FBE0002406000A3C190001273996E03C01080070
+:10FBF000AC3931DC0E002105AF8000148FD7080826
+:10FC00002418FFF03C15570902F8B02412D503243C
+:10FC100024040001AF8000303C148000369701803E
+:10FC20003C1E080127DE96E0369301008E9000000E
+:10FC30003205000310A0FFFD3207000110E000882C
+:10FC4000320600028E7100283C048000AE91002034
+:10FC50008E6500048E66000000A0382100C040219F
+:10FC60008C8301B80460FFFE3C0B0010240A0800DE
+:10FC700000AB4824AC8A01B8552000E2240ABFFF3B
+:10FC80009675000E3C1208008E52002030AC4000E9
+:10FC900032AFFFFF264E000125ED00043C010800B5
+:10FCA000AC2E0020118000EAAF8D002C3C18002003
+:10FCB00000B8B02412C000E730B980002408BFFFAC
+:10FCC00000A8382434C81000AF87000030E62000B8
+:10FCD00010C000EB2409FFBF3C03000400E328240C
+:10FCE00010A00002010910243502004030EA010092
+:10FCF00011400010AF8200048F8B003011600007AC
+:10FD00003C0D002000ED6024118000043C0F000435
+:10FD100000EF702411C00239000000009668001E38
+:10FD20009678001C3115FFFF0018B40002B690252C
+:10FD3000AF92000C30F910001320001324150001BD
+:10FD400030FF002017E0000A3C04100000E41024FB
+:10FD50001040000D3C0A0C003C090BFF00EA18247F
+:10FD60003525FFFF00A3302B10C0000830ED010047
+:10FD70003C0C08008D8C002C24150005258B0001FF
+:10FD80003C010800AC2B002C30ED010015A0000B4D
+:10FD90003C0500018F85000430AE400055C00007CF
+:10FDA0003C0500013C161F0100F690243C0F10009A
+:10FDB000124F01CE000000003C05000100E5302498
+:10FDC00010C000B13C0C10003C1F08008FFF002445
+:10FDD00033E90002152000732403000100601021A4
+:10FDE000104000083C0680003C188000370F0100DE
+:10FDF0008DEE00243C056020ACAE00140000000035
+:10FE00003C0680003C084000ACC8013800000000FF
+:10FE10005220001332060002262A0140262B0080C1
+:10FE2000240DFF80014D2024016D6024000C194039
+:10FE30003162007F0004A9403152007F3C1620004F
+:10FE400036C900020062F82502B2382500E988258B
+:10FE500003E9C825ACD90830ACD10830320600021D
+:10FE600010C0FF723C0F800035E501408CB80000E7
+:10FE700024100040ADF8002090AE000831C300709F
+:10FE8000107000D628680041510000082405006069
+:10FE9000241100201071000E3C0B40003C06800035
+:10FEA000ACCB01780A001304000000001465FFFBCE
+:10FEB0003C0B40000E002022000000003C0B4000E4
+:10FEC0003C068000ACCB01780A001304000000005F
+:10FED00090BF0009241900048CA7000033E900FF3B
+:10FEE000113901B22523FFFA2C72000612400016C8
+:10FEF0003C0680008CAB00048F86002494A2000A8C
+:10FF0000000B5602312500FF10C000053044FFFFF2
+:10FF10002D4C000815800002254A0004240A000325
+:10FF20002410000910B001F828AE000A11C001DC4D
+:10FF3000240F000A2404000810A40028000A41C06D
+:10FF4000010038213C0680008CC801B80500FFFE86
+:10FF500034D00180AE07000034C401409085000811
+:10FF6000240A00023C0B400030B900FF00198A004F
+:10FF70000229C025A6180008A20A000B948F000AC7
+:10FF80003C091000A60F00108C8E0004AE0E002459
+:10FF9000ACC901B83C068000ACCB01780A00130460
+:10FFA000000000003C0A8000354401009483000EEC
+:10FFB0003C0208008C4200D8240400803065FFFF1A
+:10FFC000245500013C010800AC3500D80E000FDBC1
+:10FFD000240600030A00137000001821000BC2025F
+:10FFE000330300FF240A0001146AFFD60100382100
+:10FFF0008F910020AF830024262B00010A0013CA32
 :020000040001F9
-:1000000024870004000721C00240282136C60002D0
-:100010000E000FDB00000000000020210A0013ABDF
-:10002000008018210A0013812412002000072602F4
-:100030003099000F0019F8C03C120801265294783C
-:1000400003F240211100FFDCAF990010910900007C
-:100050001120FFDA3C0380003C138000366A010067
-:10006000954B000E2403000302C030213162FFFFD4
-:1000700024450004112300EC000020219109000117
-:10008000240D0002312E00FF11CD00FA313200FFA5
-:10009000240900011249001030FF00408D040004C3
-:1000A0008F8300241460000634D30002248BFE00EA
-:1000B0002D6203815440000136C6004034D3000253
-:1000C00030A5FFFF0E000FDB3266FFFF0000482166
-:1000D0000A0013AB0120182153E0FFF18D04000446
-:1000E0003C080801910894791100FFED24090001F2
-:1000F0000A0013AB012018213C0480008C8A01B84F
-:100100000540FFFE349601802415001CAEC7000098
-:10011000A2D5000B3C021000AC8201B83C0B4000A1
-:100120003C068000ACCB01780A0012B3000000004E
-:100130002EB203EF2FF900013A4900010329C02430
-:100140001700FFB6240400013C0308008C6300D0B4
-:100150002E65000C001321C0386B00012D620001D8
-:10016000004540241500FFA832B2FFFF266AFFFCBD
-:100170002D46000414C0001300002021386D000239
-:100180002DAC0001018518241460000F02402821C5
-:10019000266EFFF82DC5000414A0FF9B0000000090
-:1001A00000077A420013382B01E7A82456A0000864
-:1001B00002402821001321C0024028210A0013FD1B
-:1001C00036C60002024028210A0013FD36C600028E
-:1001D0000E000FDB32C6FFFB0A001467001321C0BC
-:1001E00010B0007200045A022406000B14A6FE7C14
-:1001F000000749C0314600FF00065600000A5E03B2
-:10020000056200B030C6007F000670C03C0F0801D8
-:1002100025EF947801CFA821A2A00001A2A00000A0
-:100220003C1360008E631820240D000100CD4804AB
-:1002300000096027000749C0006C90240120382184
-:10024000AE7218200A0012F2A6A0000214C0004BE1
-:100250008F8C0020000749C03C0B8000AD69002056
-:100260003C118008963F004013E000022405000185
-:10027000240500413C0480008C8A01B80540FFFE43
-:100280003496018024120003AEC90000A2D2000BF4
-:10029000A6C0000EA6C0001AA6C00010AEC000285E
-:1002A000A6C5000896D3002636750001A6D50026FF
-:1002B000AEC0002C3C021000AC8201B80A0012F261
-:1002C0000120382114C0FEF83C060001266B000412
-:1002D0003165FFFF36C600023C0380008C7301B815
-:1002E0000660FFFE8F8900083C0D800035AC018060
-:1002F000AD800000512000DD3C09800024AF0012D9
-:10030000012F702B51C000D93C09800096F20020CB
-:100310003C1980002418001A3256FFFF372A01804A
-:1003200030F54000A158000B12A000D526C3FFFEF7
-:100330000123F82B17E000D32404FFFE3508000149
-:10034000A5430014AF8800042413BFFF3C0B8000BA
-:100350000113502435680180A505000EA505001A7B
-:10036000A5060008A50A0026A50700103C071000F6
-:10037000AE8701B80A0013AB00001821000749C07E
-:100380002583FFFF1460FE16AF8300200120382173
-:100390000A0012F2AF8000240E001054000000008A
-:1003A0008F8700000A001379AF82000C240300FF3E
-:1003B0001163FE0B000749C010C00038000B760027
-:1003C000000B20C03C0908012529947800891821D8
-:1003D00024020001A06200003C16080126D6947891
-:1003E0003C0208012442947C00962821000749C061
-:1003F00000828821000AFC02AE290000A0BF000193
-:100400003C0460008C9818202419000101793804FC
-:100410000307302501203821A4AA0002AC86182049
-:100420000A0012F33C06800091030001241600012B
-:100430001076FF272409000124050002106500043E
-:1004400030E60040240900010A0013AB0120182106
-:1004500050C0FFFD24090001954C0010950A0002D0
-:100460003187FFFF5147FE98012018210A00150B24
-:100470002409000130EF004011E0FF1900000000E6
-:10048000955900109518000233350FFF1715FF140A
-:10049000313200FF0A00141E24090001000E6E0311
-:1004A00005A2000F316B007F10E30008000B20C095
-:1004B0003C10080126109478009018210A0014EED0
-:1004C000240200020A00147BAF8000203C0F0801C8
-:1004D00025EF9478008F18210A0014EE24020003FF
-:1004E0000A001523AF8B00200003A080028698210C
-:1004F0008E7200043C1160000A00129902512821FA
-:100500000A0012B0AF8400288C64400030930100D0
-:100510001260004B240900043C1908008F390024A4
-:1005200032D80004AFA90010170000033332000DC9
-:10053000241F0002AFBF001000071AC2386A000172
-:100540002EA603EF3142000138CB0001004B4025BD
-:100550001100000332D3FFFB2416FFFB0256902448
-:1005600030EC010011800016324800013C0E0F00F3
-:1005700000EE28243C0D020010AD00113C1F80004D
-:1005800037E90100913800138FAF00102419FFFEE6
-:10059000330400FF2487000402599024000721C07F
-:1005A00012400002026F30253266FFFF0E000FDBA3
-:1005B00032A5FFFF1240FE990000202132480001C1
-:1005C0001100000E324A00048FAB0010240200011B
-:1005D00012420002026B30253266FFFF000020212C
-:1005E0000E000FDB32A5FFFF2406FFFE024690241B
-:1005F0001240FE8A00002021324A00045140000EC1
-:10060000240400018FB600102403000412430002EA
-:10061000027630253266FFFF2413FFFB32A5FFFF71
-:10062000240401000E000FDB0253A82412A0FE7B5D
-:1006300000002021240400010A0013AB00801821CF
-:100640003C0C08008D8C0024319200015240FE7356
-:100650000000202132A5FFFF36C600020E000FDB8E
-:10066000000020210A0014000000202124020003C1
-:1006700035230180A062000B0A0014CC2413BFFFB5
-:100680002404FFFE0A0014CA010440243C03800035
-:10069000346401008C85000030A2003E1440000844
-:1006A00000000000AC6000488C87000030E607C006
-:1006B00010C0000500000000AC60004CAC600050B1
-:1006C00003E0000824020001AC600054AC6000406C
-:1006D0008C880000310438001080FFF90000000011
-:1006E0002402000103E00008AC6000443C038000E9
-:1006F0008C6201B80440FFFE34670180ACE4000066
-:1007000024080001ACE00004A4E500082405000270
-:10071000A0E8000A34640140A0E5000B9483000ABD
-:1007200014C00008A4E30010ACE000243C078000E3
-:1007300034E901803C041000AD20002803E00008EB
-:10074000ACE401B88C8600043C041000ACE6002444
-:100750003C07800034E90180AD20002803E0000858
-:10076000ACE401B83C0680008CC201B80440FFFE36
-:1007700034C7018024090002ACE40000ACE40004AA
-:10078000A4E50008A0E9000A34C50140A0E9000B77
-:1007900094A8000A3C041000A4E80010ACE0002477
-:1007A0008CA30004ACE3002803E00008ACC401B84B
-:1007B0003C03900034620001008220253C0380004D
-:1007C000AC6400208C65002004A0FFFE0000000047
-:1007D00003E00008000000003C02800034430001F8
-:1007E0000083202503E00008AC44002027BDFFE083
-:1007F0003C098000AFBF0018AFB10014AFB00010CB
-:10080000352801408D10000091040009910700086F
-:1008100091050008308400FF30E600FF00061A0052
-:100820002C820081008330251040002A30A50080F2
-:10083000000460803C0D080125AD90E8018D582131
-:100840008D6A000001400008000000003C038000A9
-:10085000346201409445000A14A0001E8F91FCB838
-:100860009227000530E6000414C0001A00000000C2
-:100870000E0015E502002021922A00050200202129
-:10088000354900040E0015EFA22900059228000545
-:100890003104000414800002000000000000000D7C
-:1008A000922D0000240B002031AC00FF158B0009B5
-:1008B0003C0580008CAE01B805C0FFFE34B101805C
-:1008C000AE3000003C0F100024100005A230000BD9
-:1008D000ACAF01B80000000D8FBF00188FB100143D
-:1008E0008FB0001003E0000827BD00200200202187
-:1008F00000C028218FBF00188FB100148FB00010E6
-:10090000240600010A0015B427BD00200000000DD8
-:100910000200202100C028218FBF00188FB10014D1
-:100920008FB00010000030210A0015B427BD002050
-:1009300014A0FFE800000000020020218FBF001873
-:100940008FB100148FB0001000C028210A0015D20A
-:1009500027BD00203C0780008CEE01B805C0FFFEDB
-:1009600034F00180241F0002A21F000B34F8014064
-:10097000A60600089719000A3C0F1000A6190010DF
-:100980008F110004A6110012ACEF01B80A00163056
-:100990008FBF001827BDFFE8AFBF00100E000FD4B7
-:1009A000000000003C0280008FBF001000002021EA
-:1009B000AC4001800A0010A627BD00183084FFFF5C
-:1009C00030A5FFFF108000070000182130820001D1
-:1009D0001040000200042042006518211480FFFB33
-:1009E0000005284003E000080060102110C0000747
-:1009F000000000008CA2000024C6FFFF24A5000414
-:100A0000AC82000014C0FFFB2484000403E0000853
-:100A10000000000010A0000824A3FFFFAC86000027
-:100A200000000000000000002402FFFF2463FFFF1D
-:100A30001462FFFA2484000403E0000800000000B0
-:100A40003C03800027BDFFF834620180AFA20000A4
-:100A5000308C00FF30AD00FF30CE00FF3C0B80003B
-:100A60008D6401B80480FFFE000000008FA9000023
-:100A70008D6801288FAA00008FA700008FA40000B6
-:100A80002405000124020002A085000A8FA30000B3
-:100A9000359940003C051000A062000B8FB80000A3
-:100AA0008FAC00008FA600008FAF000027BD0008AC
-:100AB000AD280000AD400004AD800024ACC000288B
-:100AC000A4F90008A70D0010A5EE001203E000082D
-:100AD000AD6501B83C06800827BDFFE834C500803D
-:100AE000AFBF001090A700092402001230E300FFFE
-:100AF0001062000B008030218CA800500088202359
-:100B0000048000088FBF00108CAA00342404003930
-:100B10000000282100CA48230520000524060012F1
-:100B20008FBF00102402000103E0000827BD001859
-:100B30000E001689000000008FBF00102402000183
-:100B400003E0000827BD001827BDFFC8AFB2003082
-:100B5000AFB00028AFBF0034AFB1002C00A080219F
-:100B600090A5000D30A6001010C00010008090214C
-:100B70003C0280088C4400048E0300081064000CC2
-:100B800030A7000530A6000510C000932404000122
-:100B90008FBF00348FB200308FB1002C8FB000288F
-:100BA0000080102103E0000827BD003830A70005B1
-:100BB00010E0000F30AB001210C00006240400014A
-:100BC0003C0980088E0800088D2500045105009C12
-:100BD000240400388FBF00348FB200308FB1002C56
-:100BE0008FB000280080102103E0000827BD0038E6
-:100BF000240A0012156AFFE62404000102002021E5
-:100C000027A500100E000CB6AFA000101440007C09
-:100C10003C198008372400809098000833110008A0
-:100C20001220000A8FA7001030FF010013E000A47B
-:100C30008FA300148C860058006610230440000423
-:100C40003C0A8008AC8300588FA700103C0A80083B
-:100C50003548008091090008312400081480000202
-:100C600024080003000040213C1F800893F100117C
-:100C700093F9001237E600808CCC0054333800FF23
-:100C800003087821322D00FF000F708001AE28216B
-:100C900000AC582B1160006F0000000094CA005C8B
-:100CA0008CC900543144FFFF012510230082182B0A
-:100CB00014600068000000008CCB0054016518230C
-:100CC00030EC00041180006C000830808FA8001CFC
-:100CD0000068102B1040006230ED00040066102305
-:100CE0002C46008010C000020040882124110080A2
-:100CF0000E0015E5024020213C0D800835A600803D
-:100D000024070001ACC7000C90C80008001148403F
-:100D100035A70100310C007FA0CC00088E0500042F
-:100D200024AB0001ACCB0030A4D1005C8CCA003CE9
-:100D30009602000E01422021ACC400208CC3003C6E
-:100D40000069F821ACDF001C8E190004ACF900002A
-:100D50008E180008ACF800048FB10010322F000884
-:100D600055E0004793A60020A0C0004E90D8004E4A
-:100D70002411FFDFA0F8000890CF000801F17024D3
-:100D8000A0CE00088E0500083C0B80083569008065
-:100D9000AD2500388D6A00148D22003024190050D2
-:100DA00001422021AD24003491230000307F00FF58
-:100DB00013F90036264F01000E0015EF02402021E6
-:100DC00024040038000028210E0016892406000A99
-:100DD0000A0016EE240400010E000D280000202158
-:100DE0008FBF00348FB200308FB1002C8FB000283D
-:100DF000004020210080102103E0000827BD0038BA
-:100E00008E0E00083C0F800835F00080AE0E0054B6
-:100E100002402021AE0000300E0015E50000000069
-:100E2000920D00250240202135AC00200E0015EF68
-:100E3000A20C00250E000CAC024020212404003836
-:100E40002405008D0E001689240600120A0016EEF5
-:100E50002404000194C5005C0A00172930A3FFFF99
-:100E60002407021811A0FF9E00E610238FAE001C7D
-:100E70000A00173101C610230A00172E2C6202182F
-:100E8000A0E600080A00175B8E0500082406FF8014
-:100E900001E6C0243C118000AE3800288E0D000809
-:100EA00031E7007F3C0E800C00EE6021AD8D00E04C
-:100EB0008E080008AF8C00340A001767AD8800E484
-:100EC000AC800058908500082403FFF700A3382465
-:100ED000A08700080A00170C8FA700103C05080027
-:100EE00024A55F043C04080024846E503C020800E2
-:100EF00024425F0C240300063C010801AC2594F851
-:100F00003C010801AC2494FC3C010801AC22950092
-:100F10003C010801A023950403E000080000000044
-:100F200003E00008240200013C028000308800FF3A
-:100F3000344701803C0680008CC301B80460FFFE8A
-:100F4000000000008CC501282418FF803C0D800A99
-:100F500024AF010001F8702431EC007FACCE0024F6
-:100F6000018D2021ACE50000948B00EA350960007A
-:100F700024080002316AFFFFACEA000424020001E9
-:100F8000A4E90008A0E8000BACE000243C07100036
-:100F9000ACC701B8AF84003403E00008AF85006837
-:100FA000938800448F89005C8F82003430C600FF34
-:100FB0000109382330E900FF0122182130A500FF84
-:100FC0002468008810C000020124382100803821E4
-:100FD00030E400031480000330AA00031140000D28
-:100FE000312B000310A000090000102190ED00003B
-:100FF000244E000131C200FF0045602BA10D00000E
-:1010000024E700011580FFF92508000103E000082E
-:10101000000000001560FFF30000000010A0FFFBBF
-:10102000000010218CF8000024590004332200FF36
-:101030000045782BAD18000024E7000415E0FFF907
-:101040002508000403E00008000000009385004428
-:10105000938800548F87005C000432003103007FC6
-:1010600000E5102B30C47F001040000F00642825DD
-:101070008F8400343C0980008C8A00ECAD2A00A4E7
-:101080003C03800000A35825AC6B00A08C6C00A032
-:101090000580FFFE000000008C6D00ACAC8D00EC04
-:1010A00003E000088C6200A80A0018198F8400343D
-:1010B000938800553C02800000805021310300FEDF
-:1010C000A383005530ABFFFF30CC00FF30E7FFFFBC
-:1010D000344801803C0980008D2401B80480FFFE63
-:1010E0008F8D006824180016AD0D00008D2201249C
-:1010F0008F8D0034AD0200048D590020A507000833
-:10110000240201C4A119000AA118000B952F012087
-:101110008D4E00088D470004978300588D59002498
-:1011200001CF302100C7282100A320232418FFFF6E
-:10113000A504000CA50B000EA5020010A50C0012C2
-:10114000AD190018AD18002495AF00E83C0B100055
-:101150002407FFF731EEFFFFAD0E00288DAC0084B1
-:10116000AD0C002CAD2B01B88D46002000C7282403
-:1011700003E00008AD4500208F880034008058212E
-:1011800030E7FFFF910900D63C02800030A5FFFF49
-:10119000312400FF00041A000067502530C600FF0C
-:1011A000344701803C0980008D2C01B80580FFFE8A
-:1011B0008F820068240F0017ACE200008D390124F3
-:1011C000ACF900048D780020A4EA0008241901C4B9
-:1011D000A0F8000AA0EF000B952301208D6E0008F7
-:1011E0008D6D00049784005801C35021014D60218A
-:1011F00001841023A4E2000CA4E5000EA4F9001061
-:10120000A4E60012ACE000148D780024240DFFFF4A
-:10121000ACF800188D0F007CACEF001C8D0E007830
-:101220003C0F1000ACEE0020ACED0024950A00BE8F
-:10123000240DFFF73146FFFFACE60028950C008037
-:101240009504008231837FFF0003CA003082FFFFD4
-:101250000322C021ACF8002CAD2F01B8950E0082FE
-:101260008D6A002000AE3021014D2824A5060082A1
-:1012700003E00008AD6500203C0280003445018099
-:101280003C0480008C8301B80460FFFE8F8A00401C
-:10129000240600199549001C3128FFFF000839C0B9
-:1012A000ACA70000A0A6000B3C05100003E000085E
-:1012B000AC8501B88F8700480080402130C400FF12
-:1012C0003C0680008CC201B80440FFFE8F89006894
-:1012D0009383006434996000ACA90000A0A30005CA
-:1012E0008CE20010240F00022403FFF7A4A20006E2
-:1012F000A4B900088D180020A0B8000AA0AF000B08
-:101300008CEE0000ACAE00108CED0004ACAD00140F
-:101310008CEC001CACAC00248CEB0020ACAB0028A7
-:101320008CEA002C3C071000ACAA002C8D0900248C
-:10133000ACA90018ACC701B88D05002000A320247B
-:1013400003E00008AD0400208F86003427BDFFE0D5
-:10135000AFB10014AFBF0018AFB0001090C300D4FD
-:1013600030A500FF30620020104000080080882176
-:101370008CCB00D02409FFDF256A0001ACCA00D065
-:1013800090C800D401093824A0C700D414A000409C
-:101390003C0C80008F840034908700D42418FFBF59
-:1013A0002406FFEF30E3007FA08300D4979F00580E
-:1013B0008F82005C8F8D003403E2C823A799005808
-:1013C000A5A000BC91AF00D401F87024A1AE00D458
-:1013D0008F8C0034A18000D78F8A0034A540008212
-:1013E000AD4000EC914500D400A65824A14B00D498
-:1013F0008F9000308F84005C97860058020428216B
-:1014000010C0000FAF850030A38000543C0780005F
-:101410008E2C000894ED01208E2B0004018D5021AC
-:10142000014B8021020620233086FFFF30C8000FC9
-:10143000390900013131000116200009A388005448
-:10144000938600448FBF00188FB100148FB0001036
-:1014500027BD0020AF85006003E00008AF86005C78
-:1014600000C870238FBF0018938600448FB100140A
-:101470008FB0001034EF0C00010F282127BD002091
-:10148000ACEE0084AF85006003E00008AF86005C2E
-:1014900035900180020028210E0018A62406008243
-:1014A0008F840034908600D430C5004050A0FFBA2D
-:1014B000A38000648F8500483C0680008CCD01B875
-:1014C00005A0FFFE8F8900682408608224070002BF
-:1014D000AE090000A6080008A207000B8CA30008B4
-:1014E0003C0E1000AE0300108CA2000CAE020014E3
-:1014F0008CBF0014AE1F00188CB90018AE19002460
-:101500008CB80024AE1800288CAF0028AE0F002C39
-:10151000ACCE01B80A0018DFA38000648F8A0034C3
-:1015200027BDFFE0AFB10014AFB000108F88005CA2
-:10153000AFBF001893890038954200BC30D100FF3E
-:101540000109182B0080802130AC00FF3047FFFFDD
-:101550000000582114600003310600FF01203021F3
-:1015600001095823978300580068202B1480002716
-:101570000000000010680056241900011199006352
-:1015800034E708803165FFFF0E0018570200202164
-:101590008F8300683C07800034E601803C058000B2
-:1015A0008CAB01B80560FFFE240A00188F8400345C
-:1015B000ACC30000A0CA000B948900BE3C08100018
-:1015C000A4C90010ACC00030ACA801B8948200805F
-:1015D00024430001A4830080949F00803C060800FF
-:1015E0008CC6318833EC7FFF1186005E000000005E
-:1015F00002002021022028218FBF00188FB1001483
-:101600008FB000100A0018CB27BD0020914400D4F1
-:101610002403FF8000838825A15100D497840058BB
-:101620003088FFFF51000023938C00388F850034F1
-:101630002402EFFF008B782394AE00BC0168502B8E
-:1016400031E900FF01C26824A4AD00BC514000395B
-:10165000010058213C1F800037E601008CD80004AF
-:101660003C190001031940245500000134E74000F3
-:101670008E0A00202403FFFB2411000101432024D3
-:10168000AE0400201191002D34E7800002002021DB
-:10169000012030210E0018573165FFFF9787005851
-:1016A0008F89005CA780005801278023AF90005CE1
-:1016B000938C00388F8B00348FBF00188FB10014CB
-:1016C0008FB0001027BD002003E00008A16C00D7F8
-:1016D0003C0D800035AA01008D4800043C09000142
-:1016E0000109282454A0000134E740008E0F002097
-:1016F0002418FFFB34E7800001F87024241900014E
-:10170000AE0E00201599FF9F34E7088002002021CB
-:101710000E0018253165FFFF02002021022028213C
-:101720008FBF00188FB100148FB000100A0018CBC3
-:1017300027BD00200A00198E000048210200202148
-:10174000012030210E0018253165FFFF97870058D2
-:101750008F89005CA7800058012780230A0019A503
-:10176000AF90005C948C0080241F8000019F302487
-:10177000A4860080908B0080908F0080316700FFEE
-:101780000007C9C20019C027001871C031ED007FE1
-:1017900001AE2825A08500800A00197602002021CC
-:1017A000938500642403000127BDFFE800A33004F3
-:1017B0002CA20020AFB00010AFBF001400C0182151
-:1017C000104000132410FFFE3C0708008CE7319006
-:1017D00000E610243C088000350501801440000517
-:1017E000240600848F890034240A00042410FFFF9B
-:1017F000A12A00FC0E0018A6000000000200102123
-:101800008FBF00148FB0001003E0000827BD001840
-:101810003C0608008CC631940A0019EE00C310245F
-:101820008F87004027BDFFE0AFB20018AFB10014B2
-:10183000AFB00010AFBF001C30D000FF90E6000D2D
-:1018400000A088210080902130C5007FA0E5000D18
-:101850008F8500348E2300188CA200D01062002ED9
-:10186000240A000E0E0019E1A38A00642409FFFF78
-:10187000104900222404FFFF520000200000202114
-:101880008E2600003C0C001000CC58241560003956
-:101890003C0E000800CE682455A0003F02402021E5
-:1018A0003C18000200D880241200001F3C0A0004EB
-:1018B0008F8700408CE200148CE300108CE500144C
-:1018C0000043F82303E5C82B132000050240202124
-:1018D0008E24002C8CF10010109100310240202148
-:1018E00024020012A38200640E0019E12412FFFFFB
-:1018F000105200022404FFFF000020218FBF001CB3
-:101900008FB200188FB100148FB00010008010212A
-:1019100003E0000827BD002090A800D43504002073
-:101920000A001A17A0A400D400CA48241520000BEE
-:101930008F8B00408F8D00408DAC00101580000B08
-:10194000024020218E2E002C51C0FFEC00002021EF
-:10195000024020210A001A32240200178D6600106E
-:1019600050C0FFE600002021024020210A001A3268
-:101970002402001102402021240200150E0019E16A
-:10198000A3820064240FFFFF104FFFDC2404FFFF3D
-:101990000A001A218E2600000A001A582402001498
-:1019A0003C08000400C8382450E0FFD40000202187
-:1019B000024020210A001A32240200138F850034CD
-:1019C00027BDFFD8AFB3001CAFB20018AFB10014F1
-:1019D000AFB00010AFBF002090A700D48F90004898
-:1019E0002412FFFF34E2004092060000A0A200D4BF
-:1019F0008E030010008098211072000630D1003F45
-:101A00002408000D0E0019E1A3880064105200257F
-:101A10002404FFFF8F8A00348E0900188D4400D003
-:101A20001124000702602021240C000E0E0019E191
-:101A3000A38C0064240BFFFF104B001A2404FFFF4B
-:101A400024040020122400048F8D003491AF00D4B0
-:101A500035EE0020A1AE00D48F85005010A00019F3
-:101A6000000000001224004A8F9800348F92FCB8C6
-:101A7000971000809651000A523000488F93003C26
-:101A80003C1F08008FFF318C03E5C82B1720001E78
-:101A900002602021000028210E00194024060001C8
-:101AA000000020218FBF00208FB3001C8FB20018D0
-:101AB0008FB100148FB000100080102103E00008E7
-:101AC00027BD00285224002A8E0500148F8400347C
-:101AD000948A008025490001A489008094880080B0
-:101AE0003C0208008C42318831077FFF10E2000E73
-:101AF00000000000026020210E0018CB2405000128
-:101B00000A001AA2000020212402002D0E0019E173
-:101B1000A38200642403FFFF1443FFE12404FFFFBA
-:101B20000A001AA38FBF002094990080241F800010
-:101B300024050001033FC024A498008090920080F7
-:101B4000908E0080325100FF001181C20010782772
-:101B5000000F69C031CC007F018D5825A08B00801B
-:101B60000E0018CB026020210A001AA200002021DA
-:101B70002406FFFF54A6FFD68F8400340260202184
-:101B80000E0018CB240500010A001AA20000202133
-:101B9000026020210A001ABC2402000A2404FFFD6E
-:101BA0000A001AA2AF93005C8F88003427BDFFE8BB
-:101BB000AFB00010AFBF0014910A00D48F87004867
-:101BC00000808021354900408CE60010A10900D436
-:101BD0003C0208008C4231B030C53FFF00A2182BF8
-:101BE000106000078F85004C240DFF8090AE000D23
-:101BF00001AE6024318B00FF156000080006C3822F
-:101C0000020020212403000D8FBF00148FB00010AC
-:101C100027BD00180A0019E1A383006433060003FE
-:101C2000240F000254CFFFF70200202194A2001CD1
-:101C30008F85003424190023A4A200E88CE800005A
-:101C400000081E02307F003F13F900353C0A008374
-:101C50008CE800188CA600D01106000800000000D7
-:101C60002405000E0E0019E1A38500642407FFFF80
-:101C7000104700182404FFFF8F85003490A900D47A
-:101C800035240020A0A400D48F8C0040918E000D3C
-:101C900031CD007FA18D000D8F8300501060001C9E
-:101CA000020020218F84004C8C9800100303782BB5
-:101CB00011E0000D2419001802002021A3990064EE
-:101CC0000E0019E12410FFFF105000022404FFFF52
-:101CD000000020218FBF00148FB000100080102161
-:101CE00003E0000827BD00188C8600108F9F00407D
-:101CF0000200202100C31023AFE2001024050001E0
-:101D00000E001940240600010A001B2E00002021AD
-:101D10000E0018CB240500010A001B2E0000202114
-:101D2000010A5824156AFFD98F8C0040A0A600FC38
-:101D30000A001B1BA386005630A500FF24060001E5
-:101D400024A9000100C9102B1040000C0000402104
-:101D5000240A000100A61823308B000124C60001CC
-:101D6000006A3804000420421160000200C9182BE8
-:101D7000010740251460FFF800A6182303E00008BF
-:101D80000100102127BDFFD8AFB000188F90004888
-:101D9000AFB1001CAFBF00202403FFFF2411002FB0
-:101DA000AFA30010920600002405000826100001D1
-:101DB000006620260E001B47308400FF00021E0034
-:101DC0003C021EDC34466F410A001B6F00001021EC
-:101DD00010A00009008018212445000130A2FFFF57
-:101DE0002C4500080461FFFA0003204000862026ED
-:101DF00014A0FFF9008018210E001B4724050020C5
-:101E00008FA300102629FFFF313100FF000342029B
-:101E1000240700FF1627FFE20102182600035027BF
-:101E2000AFAA0014AFAA00100000302127A80010AC
-:101E300027A7001400E6782391ED000324CE0001CB
-:101E400000C8602131C600FF2CCB00041560FFF9EB
-:101E5000A18D00008FA200108FBF00208FB1001C49
-:101E60008FB0001803E0000827BD002827BDFFD071
-:101E7000AFB3001CAFB00010AFBF0028AFB5002457
-:101E8000AFB40020AFB20018AFB100143C0C80001A
-:101E90008D880128240FFF803C06800A2510010050
-:101EA000250B0080020F68243205007F016F70242B
-:101EB000AD8E009000A62821AD8D002490A600FCD8
-:101EC0003169007F3C0A8004012A1821A38600564C
-:101ED0009067007C00809821AF83002C30E20002E4
-:101EE000AF880068AF85003400A0182114400002BC
-:101EF0002404003424040030A38400448C7200DCE9
-:101F000030D100FF24040004AF92005C12240004CE
-:101F1000A38000648E7400041680001E3C088000BC
-:101F20009386005530C7000150E0000F8F86005C9B
-:101F30008CA400848CA800842413FF800093602468
-:101F4000000C49403110007F013078253C192000F9
-:101F500001F9682530DF00FE3C038000AC6D0830DD
-:101F6000A39F00558F86005C8FBF00288FB500248B
-:101F70008FB400208FB3001C8FB200188FB10014F3
-:101F80008FB000102402000127BD003003E00008DC
-:101F9000ACA600DC8E7F0008950201208E67001041
-:101FA00003E2C8213326FFFF30D8000F33150001AC
-:101FB000AF87003016A00058A398005435090C00D4
-:101FC0000309382100D81823AD030084AF870060CF
-:101FD0008E6A00043148FFFF1100007EA78A005876
-:101FE00090AC00D42407FF8000EC302430CB00FFFD
-:101FF0001560004B97860058938E0056240D000202
-:1020000030D5FFFF11CD02A20000A0218F85005C1A
-:1020100002A5802B160000BC938800443C11800070
-:1020200096240120310400FF148500888F8400600D
-:102030008F980030331200035640008530A500FF12
-:102040008F900060310C00FF24060034118600954B
-:10205000AF90004892040004148001198F8E003460
-:10206000A38000388E0D00048DC800D83C0600FF08
-:1020700034CCFFFF01AC30240106182B1460012181
-:10208000AF8600508F87005C97980058AF87003C60
-:102090000307402310C000C7A78800588F91002C69
-:1020A00030C3000300035823922A007C31710003DF
-:1020B00002261021000A208230920001001248807E
-:1020C00000492821311FFFFF03E5C82B1320012001
-:1020D0008F8800348F8500308F8800601105025A88
-:1020E0003C0E3F018E0600003C0C250000CE68240B
-:1020F00011AC01638F84004830E500FF0E0017E14A
-:10210000000030218F8800348F87005C8F8500307D
-:102110000A001D4E8F8600500A001BEDAF8700603D
-:1021200090AC00D400EC2024309000FF1200001688
-:102130009386005590B5008890B400D724A80088F5
-:1021400032A2003F2446FFE02CD10020A3940038A7
-:102150001220000CAF880048240E000100CE20049D
-:10216000308A00191540012B3C06800034D800024B
-:10217000009858241560022E309200201640023438
-:10218000000000009386005530CE000111C0000F02
-:10219000978800588CA900848CAF00842410FF809D
-:1021A0000130C8240019194031ED007F006D382539
-:1021B0003C1F200000FF902530CB00FE3C18800023
-:1021C000AF120830A38B0055978800581500FF8484
-:1021D000000000008E630020306C00041180FF516D
-:1021E000938600552404FFFB006430243C038000E8
-:1021F000AE660020346601808C7301B80660FFFE75
-:102200008F8E0068346A01003C150001ACCE0000DE
-:102210008C62012424076085ACC200048D54000444
-:1022200002958824522000012407608324120002B2
-:102230003C1810003C0B8000A4C70008A0D2000B83
-:10224000AD7801B80A001BC29386005530A500FF87
-:102250000E0017E1240600018F8800683C0580000D
-:1022600034A909002502018893880044304A0007F8
-:10227000304B00783C0340802407FF800163C82571
-:10228000014980210047F824310C00FF2406003466
-:10229000ACBF0800AF900048ACB908105586FF6E7F
-:1022A000920400048F8400348E110030908E00D48C
-:1022B00031CD001015A000108F83005C2C6F00053D
-:1022C00015E000E400000000909800D42465FFFCB5
-:1022D000331200101640000830A400FF8F9F0060EA
-:1022E0008F99003013F900043887000130E20001B3
-:1022F000144001C8000000000E001B5A000000003E
-:102300000A001D8F000000008F84006030C500FFB0
-:102310000E0017E124060001938E0044240A0034C5
-:1023200011CA00A08F8500348F86005C9783005807
-:102330003062FFFF00C28823AF91005CA780005885
-:102340001280FF90028018212414FFFD5474FFA214
-:102350008E6300208E6900042403FFBF240BFFEF6F
-:102360000135C823AE79000490AF00D431ED007F71
-:10237000A0AD00D48E6600208F980034A78000584E
-:1023800034DF0002AE7F0020A70000BC931200D40F
-:1023900002434024A30800D48F950034AEA000EC83
-:1023A00092AE00D401CB5024A2AA00D40A001C6E25
-:1023B0008F8500348F910030AF80005C0227582158
-:1023C000AF8B0030000020212403FFFF108301B4F5
-:1023D0008F8500348E0C00103C0D08008DAD31B09F
-:1023E0009208000031843FFF008D802B12000023F3
-:1023F000310D003F3C1908008F3931A88F9F0068CC
-:10240000000479802408FF80033F2021008FC82129
-:10241000938500550328F8243C0600803C0F80007B
-:1024200034D80001001F91403331007F8F86003483
-:102430000251502535EE0940332B00783330000728
-:102440003C0310003C02800C01789025020E4821CC
-:102450000143C0250222382134AE0001ADFF08043B
-:10246000AF89004CADF20814AF870040ADFF0028E3
-:10247000ACD90084ADF80830A38E00559383005684
-:10248000240700035067002825A3FFE0240C000167
-:10249000146CFFAB8F8500342411002311B100842C
-:1024A000000000002402000B026020210E0019E150
-:1024B000A38200640040A0210A001CC98F8500345B
-:1024C00002602021240B000C0E0019E1A38B006494
-:1024D000240AFFFF104AFFBC2404FFFF8F8E003444
-:1024E000A38000388E0D00048DC800D83C0600FF84
-:1024F00034CCFFFF01AC30240106182B1060FEE144
-:10250000AF86005002602021241200190E0019E14C
-:10251000A3920064240FFFFF104FFFAB2404FFFFC2
-:102520000A001C1A8F8600502C7400201280FFDED7
-:102530002402000B000328803C110801263192EC94
-:1025400000B148218D2D000001A00008000000000E
-:102550008F85003000A7102193850038AF820030AE
-:1025600002251821A3830038951F00BC02262821CC
-:1025700037F91000A51900BC5240FF92AF85005CEE
-:10258000246A0004A38A0038950900BC24A400042E
-:10259000AF84005C35322000A51200BC0A001CEBA1
-:1025A000000020218F86005C2CCB00051560FF60A9
-:1025B000978300583072FFFF00D240232D1800058A
-:1025C00013000003306400FF24DFFFFC33E400FF4E
-:1025D0008F8500608F86003010A60004388F0001C0
-:1025E00031ED000115A00138000000008F84003497
-:1025F000908C00D435870010A08700D48F850034DC
-:102600008F86005C97830058ACA000EC0A001CC6C3
-:102610003062FFFF8CAA00848CB500843C0410005B
-:10262000014710240002894032B4007F0234302573
-:1026300000C460253C0880002405000102602021C0
-:10264000240600010E001940AD0C08300A001C5A87
-:102650008F8500348C8200EC1222FE7E02602021E5
-:1026600024090005A38900640E0019E12411FFFF6D
-:102670001451FE782404FFFF0A001CEC2403FFFF22
-:102680008F8F00488F8800348DF80000AD180088C7
-:102690008DE70010AD0700988F87005C0A001D4E83
-:1026A0008F8600502407FFFF1187000500000000FF
-:1026B0000E001AE3026020210A001D270040A0211D
-:1026C0000E001A68026020210A001D270040A02188
-:1026D0008F9000483C0908008D2931B08E11001000
-:1026E00032323FFF0249682B11A0000C240AFF8000
-:1026F0008F85004C90AE000D014E1024304C00FF31
-:1027000011800007026020210011C38233030003FF
-:10271000240B0001106B0105000000000260202165
-:102720002418000D0E0019E1A39800640040202138
-:102730008F8500340A001CC90080A0218F900048BA
-:102740003C0A08008D4A31B08F85004C8E04001081
-:102750000000A0218CB1001430823FFF004A602BA2
-:102760008CB200205180FFEE0260202190B8000D55
-:10277000240BFF800178702431C300FF5060FFE814
-:1027800002602021000443823106000314C0FFE4EC
-:102790000260202194BF001C8F9900348E0600280F
-:1027A000A73F00E88CAF0010022F202314C401398A
-:1027B000026020218F83005000C36821022D382B36
-:1027C00014E00135240200188F8A00408F82002C0B
-:1027D000024390218D4B001001637023AD4E001019
-:1027E000AD5200208C4C00740192282B14A001568D
-:1027F000026020218F84004C8E0800248C860024E7
-:1028000011060007026020212419001C0E0019E1A6
-:10281000A3990064240FFFFF104FFFC52404FFFF9E
-:102820008F8400408C87002424FF0001AC9F00248B
-:10283000125101338F8D002C8DB100741232013092
-:102840003C0B00808E0E000001CB5024154000751B
-:10285000000000008E0300142411FFFF1071000619
-:10286000026020212418001B0E0019E1A3980064C7
-:102870001051FFAF2404FFFF8E0300003C0800014D
-:102880000068302410C000133C0400800064A024C1
-:102890001680000902002821026020212419001A54
-:1028A0000E0019E1A3990064240FFFFF104FFFA051
-:1028B0002404FFFF02002821026020210E001A01DB
-:1028C000240600012410FFFF1050FF992404FFFF8D
-:1028D000241400018F9F00400260202102803021DB
-:1028E00097F100342405000126270001A7E70034F2
-:1028F0000E00194000000000000020218F850034E8
-:102900000A001CC90080A0218F9000483C140800D8
-:102910008E9431B08E07001030E83FFF0114302B49
-:1029200010C000618F86004C241FFF8090C5000DF1
-:1029300003E52024309200FF5240005C0260202119
-:102940008F8D005011A0000700078B828F85003407
-:102950008F89FCB894AF00809539000A132F00F6D8
-:102960008F87003C322C00031580006300000000BC
-:1029700092020002104000D7000000008E0A0024DE
-:10298000154000D8026020219204000324060002B2
-:10299000308800FF15060005308500FF8F94005039
-:1029A000528000F202602021308500FF38AD001017
-:1029B0002DA400012CBF000103E4302502002821D2
-:1029C0000E001A01026020212410FFFF105000BEEB
-:1029D0008F8500348F830050106000C424050001EF
-:1029E0003C1908008F39318C0323782B15E000B196
-:1029F0002409002D02602021000028210E0019402A
-:102A0000240600018F850034000018210A001CC92B
-:102A10000060A0210E00180C000000000A001D8FAD
-:102A200000000000AC8000200A001E0F8E0300147E
-:102A300000002821026020210E0019402406000118
-:102A40000A001C5A8F8500340A001D4E8F880034FE
-:102A50008CB000848CB900843C0310000207482429
-:102A600000096940332F007F01AFF82503E32825D3
-:102A7000ACC5083091070001240500010260202147
-:102A80000E00194030E600010A001C5A8F85003400
-:102A9000938F00442403FFFD0A001CCBAF8F005C22
-:102AA0000A001CCB2403FFFF026020212410000D2C
-:102AB0000E0019E1A3900064004018218F850034B6
-:102AC0000A001CC90060A0210E00180C00000000C4
-:102AD000978300588F86005C3070FFFF00D048233A
-:102AE0002D3900051320FE128F850034ACA200ECB6
-:102AF0000A001CC63062FFFF90C3000D307800084A
-:102B00005700FFA29204000302602021240200105B
-:102B10000E0019E1A38200642403FFFF5443FF9BCE
-:102B2000920400030A001EA98F85003490A8000DAE
-:102B30003106000810C000958F9400501680009E4A
-:102B4000026020218E0F000C8CA4002055E40005AB
-:102B5000026020218E1F00088CB9002413F9003A6E
-:102B600002602021240200200E0019E1A3820064EB
-:102B70002405FFFF1045FEEE2404FFFF8F8F004069
-:102B8000240CFFF72403FF8091E9000D3C14800E14
-:102B90003C0B8000012CC824A1F9000D8F8F002C64
-:102BA0003C0708008CE731AC8F8D006895E5007814
-:102BB0008F99004000ED902130BF7FFF001F204023
-:102BC0000244302130C8007F00C3C02401147021AA
-:102BD000AD78002CA5D100008F2A002825420001E5
-:102BE000AF2200288F29002C8E0C002C012C68218C
-:102BF000AF2D002C8E07002CAF2700308E0500145F
-:102C0000AF250034973F003A27E40001A724003A9B
-:102C100095F200783C1008008E1031B02643000178
-:102C200030717FFF1230005C006030218F83002CF8
-:102C300002602021240500010E0018CBA466007854
-:102C40000A001E38000020218E0700142412FFFF06
-:102C500010F200638F8C00348E0900188D8D00D027
-:102C6000152D005D026020218E0A00248CA2002810
-:102C700011420053240200210E0019E1A3820064D6
-:102C80001452FFBE2404FFFF8F8500340A001CC9C4
-:102C90000080A0212402001F0E0019E1A38200641D
-:102CA0002409FFFF1049FEA22404FFFF0A001DEBC8
-:102CB0008F830050026020210E0019E1A389006477
-:102CC0001450FF518F8500342403FFFF0A001CC9F4
-:102CD0000060A0218CCE00248E0B0024116EFF2AF0
-:102CE000026020210A001EBD2402000F0E0018CB36
-:102CF000026020218F8500340A001E7C000018210C
-:102D00008E0900003C050080012590241640FF45F7
-:102D10002402001A026020210E0019E1A38200643F
-:102D2000240CFFFF144CFECB2404FFFF8F850034DE
-:102D30000A001CC90080A0212403FFFD0060A0211F
-:102D40000A001CC9AF87005C2418001D0E0019E1A1
-:102D5000A39800642403FFFF1443FEA62404FFFF8E
-:102D60008F8500340A001CC90080A0212412002C89
-:102D70000E0019E1A39200642403FFFF1043FF50EB
-:102D80008F8500340A001E63920400030260202134
-:102D90000A001ED324020024240B8000006B702440
-:102DA00031CAFFFF000A13C2305100FF0011802713
-:102DB0000A001F04001033C00A001ED3240200279B
-:102DC0008E0600288CAE002C10CE00080260202158
-:102DD0000A001F172402001F0A001F172402000EFA
-:102DE000026020210A001F17240200258E04002CF7
-:102DF0001080000D8F83002C8C7800740304582BF6
-:102E00005560000C026020218CA800140086A021CF
-:102E10000114302B10C0FF5A8F8F00400260202118
-:102E20000A001F1724020022026020210A001F1737
-:102E3000240200230A001F172402002627BDFFD802
-:102E4000AFB3001CAFB10014AFBF0020AFB2001889
-:102E5000AFB000103C0280008C5201408C4B014806
-:102E60003C048000000B8C02322300FF317300FF12
-:102E70008C8501B804A0FFFE34900180AE120000E2
-:102E80008C8701442464FFF0240600022C83001385
-:102E9000AE070004A6110008A206000BAE13002422
-:102EA0001060004F8FBF0020000448803C0A0801DA
-:102EB000254A936C012A40218D04000000800008FF
-:102EC000000000003C0308008C6331A831693FFF1B
-:102ED0000009998000728021021370212405FF806F
-:102EE000264D0100264C00803C02800031B1007F5D
-:102EF0003198007F31CA007F3C1F800A3C19800452
-:102F00003C0F800C01C5202401A530240185382404
-:102F1000014F1821AC460024023F402103194821EB
-:102F2000AC470090AC440028AF830040AF88003429
-:102F3000AF89002C0E001897016080213C038000AF
-:102F40008C6B01B80560FFFE8F8700408F860034D0
-:102F50003465018090E8000DACB20000A4B000061A
-:102F6000000826000004160300029027001227C262
-:102F70001080008124C20088241F6082A4BF000842
-:102F8000A0A0000524020002A0A2000B8F8B002C41
-:102F9000000424003C08270000889025ACB20010F3
-:102FA000ACA00014ACA00024ACA00028ACA0002C65
-:102FB0008D6900382413FF80ACA9001890E3000D40
-:102FC00002638024320500FF10A000058FBF00209F
-:102FD00090ED000D31AC007FA0EC000D8FBF002004
-:102FE0008FB3001C8FB200188FB100148FB0001087
-:102FF0003C0A10003C0E800027BD002803E00008BA
-:10300000ADCA01B8265F01002405FF8033F8007FB8
-:103010003C06800003E578243C19800A031920212E
-:10302000ACCF0024908E00D400AE682431AC00FFF9
-:1030300011800024AF840034248E008895CD0012C6
-:103040003C0C08008D8C31A831AB3FFF0192482128
-:10305000000B5180012A402101052024ACC4002826
-:103060003107007F3C06800C00E620219083000D94
-:1030700000A31024304500FF10A0FFD8AF8400400B
-:103080009098000D330F001015E0FFD58FBF002082
-:103090000E001897000000003C0380008C7901B8F6
-:1030A0000720FFFE00000000AE1200008C7F0144EC
-:1030B000AE1F0004A611000824110002A211000B8B
-:1030C000AE1300243C13080192739528327000015E
-:1030D0005200FFC38FBF00200E0020D402402021E9
-:1030E0000A001FF18FBF00203C1260008E452C08A3
-:1030F0003C03F0033462FFFF00A2F824AE5F2C080B
-:103100008E582C083C1901C003199825AE532C0881
-:103110000A001FF18FBF0020264D010031AF007F54
-:103120003C10800A240EFF8001F0282101AE6024AB
-:103130003C0B8000AD6C00241660FFA8AF85003406
-:1031400024110003A0B100FC0A001FF18FBF002072
-:1031500026480100310A007F3C0B800A2409FF80C9
-:10316000014B3021010920243C078000ACE40024FD
-:103170000A001FF0AF860034944E0012320C3FFF5D
-:1031800031CD3FFF15ACFF7D241F608290D900D464
-:103190002418FF800319782431EA00FF1140FF77DB
-:1031A0000000000024070004A0C700FC8F87004037
-:1031B000241160842406000DA4B10008A0A6000517
-:1031C0000A001FDB240200023C0400012484951441
-:1031D00024030014240200FE3C010800AC2431EC5E
-:1031E0003C010800AC2331E83C010801A4229530E1
-:1031F0003C0408012484953000001821006430212B
-:10320000A0C30004246300012C6500FF54A0FFFC50
-:10321000006430213C07080024E7010003E00008B7
-:10322000AF87007400A058210080482100001021C1
-:1032300014A00012000050210A0020D0000000005D
-:103240003C010801A42095303C05080194A5953067
-:103250008F8200743C0C0801258C953000E2182107
-:1032600000AC2021014B302BA0890004000010216C
-:10327000A460000810C00039010048218F86007446
-:103280000009384000E940210008388000E6282184
-:1032900090A8000B90B9000A000820400088102177
-:1032A000000218800066C021A319000A8F850074EF
-:1032B00000E5782191EE000A91E6000B000E6840CF
-:1032C00001AE6021000C208000851021A046000B7B
-:1032D0003C0308019063952A106000222462FFFFDE
-:1032E0008F8300343C010801A022952A906C00FFD6
-:1032F0001180000400000000906E00FF25CDFFFF4C
-:10330000A06D00FF3C190801973995302723000173
-:103310003078FFFF2F0F00FF11E0FFC9254A0001A1
-:103320003C010801A42395303C05080194A5953083
-:103330008F8200743C0C0801258C953000E2182126
-:1033400000AC2021014B302BA0890004000010218B
-:10335000A460000814C0FFC90100482103E0000870
-:103360000000000003E000082402000227BDFFE087
-:10337000248501002407FF80AFB00010AFBF001804
-:10338000AFB1001400A718243C10800030A4007FC7
-:103390003C06800A008628218E110024AE030024FA
-:1033A00090A200FF14400008AF850034A0A00009DF
-:1033B0008FBF0018AE1100248FB100148FB0001021
-:1033C00003E0000827BD002090A900FD90A800FFA1
-:1033D000312400FF0E002082310500FF8F8500346C
-:1033E0008FBF0018A0A00009AE1100248FB10014F7
-:1033F0008FB0001003E0000827BD002027BDFFD0DC
-:10340000AFB20020AFB1001CAFB00018AFBF002CAE
-:10341000AFB40028AFB300243C09800095330116F7
-:1034200035320C00952F011A3271FFFF02328021D4
-:103430008E08000431EEFFFF248B0100010E68218D
-:10344000240CFF8025A5FFFF016C50243166007F0E
-:103450003C07800AAD2A002400C73021AF850070E8
-:10346000AF88006C3C010801A020952990C3000999
-:103470000200D02100809821306300FF28620005FF
-:1034800010400048AF860034286400021480008E8B
-:1034900024140001240D00053C010801A02D950D08
-:1034A00090CC00FD3C010801A020950E3C010801D4
-:1034B000A020950F90CB000A240AFF80318500FFE1
-:1034C000014B4824312700FF10E0000C0000582178
-:1034D0003C128008365100808E2F00308CD0005C6A
-:1034E00001F0702305C0018E8F87006C90D4000A14
-:1034F0003284007FA0C4000A8F8600343C1180080B
-:10350000363000808E0F00308F87006C00EF702304
-:1035100019C000EE0000000090D40009241200023F
-:10352000328400FF10920247000000008CC2005855
-:1035300000E2F82327F9FFFF1B2001300000000004
-:1035400090C500092408000430A300FF106800574C
-:10355000240A00013C010801A02A950D90C900FF32
-:10356000252700013C010801A027950C3C03080118
-:103570009063950D240600051066006A2C780005FE
-:10358000130000C4000090210003F8803C040801EF
-:10359000248493B803E4C8218F25000000A000080C
-:1035A00000000000241800FF1078005C00000000FC
-:1035B00090CC000A90CA00093C080801910895299E
-:1035C0003187008000EA48253C010801A0299514B4
-:1035D00090C500FD3C1408019294952A3111000118
-:1035E0003C010801A025951590DF00FE3C01080173
-:1035F000A03F951690D200FF3C010801A03295171C
-:103600008CD900543C010801AC3995188CD0005875
-:103610003C010801AC30951C8CC3005C3C010801E6
-:10362000AC3495243C010801AC23952016200008F9
-:103630008FBF002C8FB400288FB300248FB20020DE
-:103640008FB1001C8FB0001803E0000827BD0030C8
-:103650003C1180009624010E0E000FD43094FFFF21
-:103660003C0B08018D6B952C0260382102802821CB
-:10367000AE2B01803C1308018E73950C0160202154
-:10368000240600830E001046AFB300108FBF002C3D
-:103690008FB400288FB300248FB200208FB1001C9C
-:1036A0008FB0001803E0000827BD00303C18080068
-:1036B0008F1831FC270F00013C010800AC2F31FCB2
-:1036C0000A002165000000001474FFB9000000002A
-:1036D000A0C000FF3C0508008CA531E43C030800B5
-:1036E0008C6331E03C0208008C4232048F99003434
-:1036F00034A80001241F00023C010801AC23952CD2
-:103700003C010801A02895283C010801A022952B26
-:10371000A33F00090A00211E8F8600340E0020D42A
-:10372000000000000A0021658F8600343C1F08015C
-:1037300093FF950C2419000113F902298F87006C5F
-:103740003C100801921095103C06080190C6950E99
-:1037500010C000050200A0213C04080190849511CE
-:10376000109001E48F870074001088408F9F0074D0
-:10377000023048210009C880033F702195D8000815
-:10378000270F0001A5CF00083C0408019084951183
-:103790003C05080190A5950E0E0020820000000057
-:1037A0008F870074023020210004308000C7202160
-:1037B0008C8500048F82007000A240230502000661
-:1037C000AC8200048C8A00008F83006C01431023BC
-:1037D0005C400001AC8300008F86003490CB00FF7A
-:1037E0002D6C00025580002D241400010230F821B8
-:1037F000001F40800107282190B9000B8CAE000407
-:103800000019C04003197821000F188000671021AB
-:103810008C4D000001AE88232630FFFF5E00001FA4
-:10382000241400018C4400048CAA0000008A482360
-:1038300019200019240E00043C010801A02E950D4A
-:1038400090AD000B8CAB0004000D8840022D802150
-:1038500000101080004710218C4400040164602394
-:10386000058202009443000890DF00FE90B9000B2F
-:1038700033E500FF54B900040107A021A0D400FEE5
-:103880008F8700740107A0219284000B0E00208214
-:10389000240500018F860034241400011254009680
-:1038A0002E500001160000423C08FFFF24190002C0
-:1038B0001659FF3F00000000A0C000FF8F860034B3
-:1038C000A0D200090A0021658F86003490C7000944
-:1038D0002404000230E300FF1064016F2409000497
-:1038E000106901528F8800708CCE0054010E68233D
-:1038F00025B1000106200175241800043C010801CF
-:10390000A038950D3C010801A020950C90D400FD35
-:1039100090D200FF2E4F000215E0FF14328400FF0A
-:10392000000438408F89007490DF00FF00E410210C
-:10393000000220800089C8212FE500029324000B9B
-:1039400014A0FF0A2407000200041840006480212C
-:1039500000105880016928218CAC0004010C502310
-:103960000540FF02000000003C0308019063950E33
-:1039700014600005246F00013C010801A02495118A
-:103980003C010801A027950F3C010801A02F950ECE
-:1039900090CE00FF24E7000131CD00FF01A7882B66
-:1039A0001220FFE990A4000B0A002154000000003F
-:1039B0003C0508018CA5950C3C12000400A8F824D5
-:1039C00013F20006240200053C0908019129950D17
-:1039D0001520000224020003240200053C01080116
-:1039E000A022952990C700FF14E0012024020002C4
-:1039F000A0C200090A0021658F86003490CC00FF28
-:103A00001180FEDA240A00018F8C00708F89007407
-:103A1000240F0003018068211160001E240E0002A3
-:103A2000000540400105A02100142080008990215C
-:103A30008E510004019180230600FECC000000009E
-:103A40003C0208019042950E1440000524580001E4
-:103A50003C010801A02A950F3C010801A025951101
-:103A60003C010801A038950E90DF00FF01051021F0
-:103A70000002C88033E500FF254A00010329202108
-:103A800000AA402B1500FEB99085000B1560FFE5DC
-:103A9000000540400005404001051821000310804A
-:103AA0003C010801A02A950C3C010801A0259510B5
-:103AB000004918218C64000400E4F82327F9FFFF73
-:103AC0001F20FFE9000000008C63000000E3582382
-:103AD0000560013A01A3882310E301170184C02384
-:103AE0001B00FEA2000000003C010801A02E950D65
-:103AF0000A002293240B0001240E0004A0CE00092A
-:103B00003C0D08008DAD31F88F86003425A20001F0
-:103B10003C010800AC2231F80A00216500000000D9
-:103B20008CD9005C00F9C0231F00FE7B0000000060
-:103B30008CDF005C10FFFF658F8400708CC3005C1D
-:103B400000834023250200011C40FF6000000000AC
-:103B50008CC9005C2487000100E9282B10A0FE948A
-:103B60003C0D80008DAB01043C0C0001016C502425
-:103B70001140FE8F240200103C010801A02295296B
-:103B80000A002165000000008F9100708F860034CC
-:103B900026220001ACC2005C0A002220241400018D
-:103BA0008F8700342404FF800000882190E9000AF8
-:103BB0002414000101243025A0E6000A3C05080178
-:103BC00090A5950E3C040801908495110E0020826A
-:103BD000000000008F8600348F85007490C800FDBF
-:103BE000310700FF000740400107F821001FC08097
-:103BF0000305C8219323000BA0C300FD8F8500742B
-:103C00008F86003403056021918F000B000F7040F8
-:103C100001CF6821000D8080020510218C4B00002F
-:103C2000ACCB00548D8400048F830070006450235B
-:103C3000194000022482000124620001010748218A
-:103C4000ACC2005C0009308000C5402100E02021AA
-:103C5000240500010E0020829110000B8F86003495
-:103C600090C500FF10A0FF0C001070408F850074FD
-:103C700001D06821000D1080004558218D6400009E
-:103C80008F8C0070018450232547000104E0FF025F
-:103C9000263100013C0308019063950E2E2F00028F
-:103CA000247800013C010801A038950E3C01080170
-:103CB000A034950F11E0FEF8020038210A0022F32B
-:103CC000000740408F8400348F8300708C8500583B
-:103CD00000A340230502FE9AAC8300580A0021C9C4
-:103CE000000000003C07080190E7952A240200FF2D
-:103CF00010E200BE8F8600343C11080196319532E7
-:103D00003C03080124639530262500013230FFFF73
-:103D100030ABFFFF020360212D6A00FF1540008DCC
-:103D2000918700043C010801A42095328F8800345B
-:103D30000007484001272821911800FF0005308026
-:103D40002405000127140001A11400FF3C12080102
-:103D50009252952A8F8800748F8E006C264F000136
-:103D600000C820213C010801A02F952AAC8E00003C
-:103D70008F8D0070A4850008AC8D00043C03080101
-:103D80009063950C14600077000090213C010801BD
-:103D9000A025950CA087000B8F8C007400CC5021BF
-:103DA000A147000A8F820034A04700FD8F840034B1
-:103DB000A08700FE8F8600348F9F006CACDF00541C
-:103DC0008F990070ACD900588F8D00740127C021E5
-:103DD00000185880016DA021928F000A000F7040DA
-:103DE00001CF182100038880022D8021A207000B3B
-:103DF0008F86007401666021918A000B000A1040D2
-:103E0000004A20210004288000A64021A107000AC2
-:103E10003C07800834E900808D2200308F86003412
-:103E2000ACC2005C0A0022202414000190CA00FFEA
-:103E30001540FEAD8F880070A0C400090A002165FE
-:103E40008F860034A0C000FD8F9800342406000146
-:103E5000A30000FE3C010801A026950D3C010801CD
-:103E6000A020950C0A0021540000000090CB00FF18
-:103E70003C0408019084952B316C00FF0184502B89
-:103E80001540000F2402000324020004A0C2000910
-:103E90000A0021658F86003490C3000A2410FF8039
-:103EA00002035824316C00FF1180FDC100000000A6
-:103EB0003C010801A020950D0A00215400000000DB
-:103EC000A0C200090A0021658F86003490D4000A40
-:103ED0002412FF8002544824312800FF1500FFF40B
-:103EE000240200083C010801A02295290A0021654E
-:103EF00000000000001088408F8B006C02301821F9
-:103F00000003688001A72021AC8B00008F8A00701D
-:103F1000240C0001A48C0008AC8A00043C050801B4
-:103F200090A5950E2402000110A2FE1E24A5FFFFFD
-:103F30000A0021DF9084000B0184A0231A80FD8BEE
-:103F4000000000003C010801A02E950D0A002293FC
-:103F5000240B00013C010801A42595320A002345E9
-:103F60008F880034240B0001106B00228F980034DE
-:103F70008F85003490BF00FF33F900FF1079002BCC
-:103F8000000000003C1F080193FF9510001FC8406F
-:103F9000033FC0210018A0800288782191EE000A1A
-:103FA000A08E000A8F8D00743C0308019063951069
-:103FB00000CD88210A00236BA223000B26300001CC
-:103FC0000600003101A490230640002B24020003C8
-:103FD0003C010801A02F950D0A002293240B00013B
-:103FE0008F8900340A0021C9AD2700540A00221F1E
-:103FF00024120001931400FDA094000B8F8800345C
-:104000008F8F0074910E00FE00CF6821A1AE000AD0
-:104010008F910034A22700FD8F83006C8F900034B5
-:10402000AE0300540A00236C8F8D007490B000FE24
-:10403000A090000A8F8B00348F8C0074916A00FD71
-:1040400000CC1021A04A000B8F840034A08700FE12
-:104050008F8600708F850034ACA600580A00236C50
-:104060008F8D007494B80008ACA400040303782179
-:104070000A002213A4AF00083C010801A022950DFC
-:104080000A0021540000000090CF0009240D000414
-:1040900031EE00FF11CDFD85240200013C01080135
-:0C40A000A022950D0A0021540000000031
-:0440AC000800334491
-:1040B0000800334408003420080033F4080033D8E3
-:1040C0000800332808003328080033280800334C40
-:1040D0008008010080080080800800005F86543757
-:1040E000E4AC62CC50103A4536621985BF14C0E882
-:1040F0001BC27A1E84F4B556094EA6FE7DDA01E78E
-:10410000C04D7481080058D008005914080058B8F0
-:10411000080058B8080058B8080058B8080058D027
-:10412000080058B8080058B80800591C080058B8CA
-:1041300008005830080058B8080058B80800591C42
-:10414000080058B8080058B8080058B8080058B80F
-:10415000080058B8080058B8080058B8080058B8FF
-:10416000080058B8080058B8080058F0080058B8B7
-:10417000080058F0080058B8080058B8080058B8A7
-:10418000080058F4080058F0080058B8080058B85B
-:10419000080058B8080058B8080058B8080058B8BF
-:1041A000080058B8080058B8080058B8080058B8AF
-:1041B000080058B8080058B8080058B8080058B89F
-:1041C000080058B8080058B8080058B8080058B88F
-:1041D000080058B8080058B8080058F4080058F407
-:1041E000080058B8080058F4080058B8080058B833
-:1041F000080058B8080058B8080058B8080058B85F
-:10420000080058B8080058B8080058B8080058B84E
-:10421000080058B8080058B8080058B8080058B83E
-:10422000080058B8080058B8080058B8080058B82E
-:10423000080058B8080058B8080058B8080058B81E
-:10424000080058B8080058B8080058B8080058B80E
-:10425000080058B8080058B8080058B8080058B8FE
-:10426000080058B8080058B8080058B8080058B8EE
-:10427000080058B8080058B8080058B8080058B8DE
-:10428000080058B8080058B8080058B8080058B8CE
-:10429000080058B8080058B8080058B8080058B8BE
-:1042A000080058B8080058B8080058B8080058B8AE
-:1042B000080058B8080058B8080058B8080058B89E
-:1042C000080058B8080058B8080058B8080058B88E
-:1042D000080058B8080058B8080058B8080058B87E
-:1042E000080058B8080058B8080058B8080058B86E
-:1042F000080058B8080058B8080058B8080058B85E
-:10430000080058B80800593808007688080078EC8A
-:1043100008007694080074880800769408007720D6
-:10432000080076940800748808007488080074886F
-:10433000080074880800748808007488080074886D
-:10434000080074880800748808007488080076B42F
-:10435000080076A40800748808007488080074882F
-:10436000080074880800748808007488080074883D
-:10437000080074880800748808007488080074882D
-:1043800008007488080076A40800813408007FC003
-:10439000080080FC08007FC0080080CC08007EA8D0
-:1043A00008007FC008007FC008007FC008007FC0F1
-:1043B00008007FC008007FC008007FC008007FC0E1
-:1043C00008007FC008007FC008007FC008007FC0D1
-:1043D00008007FE808008B6C08008CC808008CA8D7
-:0843E0000800871008008B841F
-:0843E8000A000124000000009E
-:1043F000000000000000000D747061362E302E3178
-:10440000370000000600110100000000000000005D
-:10441000000000000000000000000000000000009C
-:10442000000000000000000000000000000000008C
-:10443000000000000000000000000000000000007C
-:10444000000000000000000000000000000000006C
-:10445000000000000000000000000000000000005C
-:10446000000000000000000000000000000000004C
-:104470000000000000000000000000001000000329
-:10448000000000000000000D0000000D3C020800CC
-:10449000244217203C03080024632A10AC4000008B
-:1044A0000043202B1480FFFD244200043C1D080023
-:1044B00037BD2FFC03A0F0213C100800261004900B
-:1044C0003C1C0800279C17200E0002620000000020
-:1044D0000000000D2402FF8027BDFFE000821024B1
-:1044E000AFB00010AF420020AFBF0018AFB1001452
-:1044F000936500043084007F034418213C020008C7
-:104500000062182130A50020036080213C080111C1
-:10451000277B000814A000022466005C2466005873
-:104520009202000497430104920400043047000FF4
-:104530003063FFFF308400400067282310800009AB
-:10454000000048219202000530420004104000059E
-:104550000000000010A000030000000024A5FFFCE4
-:1045600024090004920200053042000410400012A9
-:104570000000000010A000100000000096020002E1
-:1045800000A72021010440252442FFFEA742101667
-:10459000920300042402FF8000431024304200FFF5
-:1045A000104000033C0204000A000174010240258F
-:1045B0008CC20000AF4210188F4201780440FFFE09
-:1045C0002402000AA74201409602000224040009C6
-:1045D000304200070002102330420007A742014288
-:1045E000960200022442FFFEA7420144A740014672
-:1045F00097420104A74201488F420108304200203F
-:1046000050400001240400019202000430420010D6
-:10461000144000023483001000801821A743014A8F
-:10462000000000000000000000000000000000008A
-:10463000AF48100000000000000000000000000073
-:10464000000000008F4210000441FFFE3102FFFF16
-:1046500010400007000000009202000430420040B9
-:1046600014400003000000008F421018ACC200008C
-:10467000960200063042FFFF24420002000210436F
-:104680000002104003628821962200001120000DD4
-:104690003044FFFF00A710218F8300388F45101C86
-:1046A000000210820002108000431021AC4500007F
-:1046B00030A6FFFF0E00058D00052C0200402021D2
-:1046C000A6220000920300042402FF80004310246D
-:1046D000304200FF1040001F000000009202000561
-:1046E000304200021040001B000000009742100CF6
-:1046F0002442FFFEA7421016000000003C02040006
-:1047000034420030AF421000000000000000000002
-:1047100000000000000000008F4210000441FFFE76
-:10472000000000009742100C8F45101C3042FFFF24
-:10473000244200300002108200021080005B102131
-:10474000AC45000030A6FFFF0E00058D00052C02D1
-:10475000A622000096040002248400080E0001E94D
-:104760003084FFFF974401040E0001F73084FFFFFF
-:104770008FBF00188FB100148FB000103C021000E2
-:1047800027BD002003E00008AF4201783084FFFF1E
-:10479000308200078F850024104000022483000728
-:1047A0003064FFF800A4102130421FFF034218219B
-:1047B000247B4000AF850028AF82002403E000087E
-:1047C000AF4200843084FFFF3082000F8F85002CC1
-:1047D0008F860034104000022483000F3064FFF005
-:1047E00000A410210046182BAF850030004620237E
-:1047F00014600002AF82002CAF84002C8F82002C4A
-:10480000340480000342182100641821AF8300386B
-:1048100003E00008AF4200808F82001410400008BF
-:104820008F8200048F82FFDC144000058F82000419
-:104830003C02FFBF3442FFFF008220248F8200042D
-:1048400030430006240200021062000F3C02010106
-:104850002C62000350400005240200041060000F89
-:104860003C0200010A000230000000001062000556
-:10487000240200061462000C3C0201110A00022905
-:10488000008210253C02001100821025AF4210006A
-:10489000240200010A000230AF82000C00821025C1
-:1048A000AF421000AF80000C0000000000000000CC
-:1048B0000000000003E00008000000008F82000CF0
-:1048C00010400004000000008F4210000441FFFE71
-:1048D0000000000003E00008000000008F820010CC
-:1048E0002443F800000231C224C2FFF02C6303010C
-:1048F00010600003000210420A000257AC82000060
-:104900008F85001800C5102B1440000B00001821E3
-:1049100000C51023244700018F82001C00A2102133
-:104920002442FFFF0046102B544000042402FFFFE6
-:104930000A000257AC8700002402FFFF0A00026051
-:10494000AC8200008C820000000219400062182135
-:104950000003188000621821000318803C02080040
-:104960002442175C0062182103E000080060102157
-:1049700027BDFFD8AFBF0020AFB1001CAFB00018FB
-:104980003C0460088C8250002403FF7F3C066000DA
-:10499000004310243442380CAC8250008CC24C1CB2
-:1049A0003C1A8000000216023042000F104000073F
-:1049B000AF82001C8CC34C1C3C02001F3442FC0024
-:1049C00000621824000319C2AF8300188F42000848
-:1049D000275B400034420001AF420008AF80002452
-:1049E0003C02601CAF400080AF4000848C45000852
-:1049F0008CC3080834028000034220212402FFF007
-:104A0000006218243C0200803C010800AC22042013
-:104A10003C025709AF84003814620004AF850034AB
-:104A2000240200010A000292AF820014AF80001439
-:104A30008F42000038420001304200011440FFFC68
-:104A40008F820014104000160000000097420104FD
-:104A5000104000058F830000146000072462FFFFF0
-:104A60000A0002A72C62000A2C62001050400004C9
-:104A70008F83000024620001AF8200008F8300005A
-:104A80002C62000A144000032C6200070A0002AEE8
-:104A9000AF80FFDC1040000224020001AF82FFDC87
-:104AA0008F4301088F44010030622000AF8300046F
-:104AB00010400008AF8400103C0208008C42042C17
-:104AC000244200013C010800AC22042C0A00058AA3
-:104AD0003C0240003065020014A0000324020F00D5
-:104AE0001482026024020D0097420104104002C8A3
-:104AF0003C02400030624000144000AD8F8200381C
-:104B00008C4400088F4201780440FFFE2402080014
-:104B1000AF42017824020008A7420140A7400142A9
-:104B2000974201048F8400043051FFFF308200015E
-:104B300010400007022080212623FFFE24020002ED
-:104B40003070FFFFA74201460A0002DBA74301487D
-:104B5000A74001463C0208008C42043C1440000D72
-:104B60008F830010308200201440000224030009CB
-:104B700024030001006020218F830010240209001B
-:104B80005062000134840004A744014A0A0002F67E
-:104B90000000000024020F00146200053082002093
-:104BA000144000062403000D0A0002F5240300054A
-:104BB000144000022403000924030001A743014A12
-:104BC0003C0208008C4204203C0400480E00020C09
-:104BD000004420250E000235000000008F82000CEA
-:104BE0001040003E000000008F4210003C030020F7
-:104BF00000431024104000398F820004304200022C
-:104C0000104000360000000097421014144000339A
-:104C100000000000974210088F8800383042FFFFE4
-:104C200024420006000218820003388000E8302188
-:104C3000304300018CC400001060000430420003C7
-:104C40000000000D0A00033700E810215440001056
-:104C50003084FFFF3C05FFFF0085202400851826D7
-:104C60000003182B0004102B0043102410400005F3
-:104C700000000000000000000000000D0000000027
-:104C8000240002228CC200000A00033600452025C1
-:104C90003883FFFF0003182B0004102B004310245F
-:104CA0001040000500000000000000000000000DA2
-:104CB000000000002400022B8CC200003444FFFFDF
-:104CC00000E81021AC4400003C0208008C42043093
-:104CD000244200013C010800AC2204308F62000035
-:104CE0008F840038AF8200088C8300003402FFFFFD
-:104CF0001462000F000010213C0508008CA504542C
-:104D00003C0408008C84045000B0282100B0302BF3
-:104D100000822021008620213C010800AC2504549B
-:104D20003C010800AC2404500A000580240400085B
-:104D30008C820000304201001040000F0000102162
-:104D40003C0508008CA5044C3C0408008C840448F5
-:104D500000B0282100B0302B0082202100862021C5
-:104D60003C010800AC25044C3C010800AC2404487C
-:104D70000A000580240400083C0508008CA50444B2
-:104D80003C0408008C84044000B0282100B0302B83
-:104D900000822021008620213C010800AC2504442B
-:104DA0003C010800AC2404400A00058024040008EB
-:104DB0008F6200088F62000000021602304300F08C
-:104DC000240200301062000524020040106200E05E
-:104DD0008F8200200A0005882442000114A00005EB
-:104DE00000000000000000000000000D00000000B6
-:104DF000240002568F4201780440FFFE00000000AC
-:104E00000E00023D27A40010144000050040802140
-:104E1000000000000000000D000000002400025D02
-:104E20008E0200001040000500000000000000009D
-:104E30000000000D00000000240002608F62000CE2
-:104E400004430003240200010A00042EAE00000007
-:104E5000AE0200008F8200388C480008A2000007D4
-:104E60008F65000C8F64000430A3FFFF0004240250
-:104E700000852023308200FF0043102124420005DA
-:104E8000000230832CC20081A605000A14400005F0
-:104E9000A2040004000000000000000D000000005B
-:104EA000240002788F8500380E0005AB260400141C
-:104EB0008F6200048F430108A60200083C02100024
-:104EC00000621824106000080000000097420104EE
-:104ED000920300072442FFEC346300023045FFFFD9
-:104EE0000A0003C3A2030007974201042442FFF013
-:104EF0003045FFFF960600082CC200135440000501
-:104F0000920300079202000734420001A202000748
-:104F1000920300072402000110620005240200032E
-:104F20001062000B8F8200380A0003E030C6FFFFDA
-:104F30008F8200383C04FFFF8C43000C006418246F
-:104F400000651825AC43000C0A0003E030C6FFFFE3
-:104F50003C04FFFF8C4300100064182400651825F2
-:104F6000AC43001030C6FFFF24C2000200021083D1
-:104F7000A20200058F830038304200FF000210803B
-:104F8000004328218CA800008CA200002403000408
-:104F900000021702144300120000000097420104AF
-:104FA0003C03FFFF010318243042FFFF004610239B
-:104FB0002442FFFE00624025ACA8000092030005D9
-:104FC000306200FF00021080005010219042001457
-:104FD0003042000F004310210A000415A20200060F
-:104FE0008CA40004974201049603000A3088FFFF56
-:104FF0003042FFFF004610232442FFD60002140077
-:1050000001024025ACA800049202000792040005AA
-:10501000246300280003188300641821344200042C
-:10502000A2030006A20200078F8200042403FFFBF4
-:105030003442000200431024AF82000492030006B1
-:105040008F87003800031880007010218C440020E6
-:105050003C02FFF63442FFFF008240240067182123
-:10506000AE04000CAC68000C920500063C03FF7F08
-:105070008E02000C0005288000B020213463FFFF61
-:10508000010330249488002600A72821004310241F
-:10509000AE02000CAC860020AC880024ACA8001046
-:1050A00024020010A742014024020002A74001424E
-:1050B000A7400144A7420146974201043C0400086E
-:1050C0002442FFFEA7420148240200010E00020C08
-:1050D000A742014A9603000A9202000400431021ED
-:1050E0002442000230420007000210233042000731
-:1050F0000E000235AE0200108F6200003C03080073
-:105100008C63044424040010AF8200089742010419
-:105110003042FFFF2442FFFE00403821000237C327
-:105120003C0208008C420440006718210067282BCD
-:1051300000461021004510213C010800AC23044426
-:105140003C010800AC2204400A00051500000000E4
-:1051500014A0000500000000000000000000000D89
-:10516000000000002400030A8F4201780440FFFE83
-:10517000000000000E00023D27A4001414400005AA
-:1051800000408021000000000000000D0000000031
-:10519000240003118E020000544000069202000712
-:1051A000000000000000000D000000002400031CAF
-:1051B0009202000730420004104000058F82000474
-:1051C0002403FFFB3442000200431024AF8200049A
-:1051D0008F62000404430008920200079202000656
-:1051E0008E03000CAE000000000210800050102161
-:1051F000AC430020920200073042000454400009F2
-:105200009602000A920200053C0300010002108091
-:10521000005010218C46001800C33021AC46001805
-:105220009602000A9206000427710008022020213D
-:1052300000C2302124C60005260500140E0005AB6F
-:1052400000063082920400068F6500043C027FFF56
-:1052500000042080009120218C8300043442FFFF51
-:1052600000A2282400651821AC83000492020007E4
-:105270009204000592030004304200041040001420
-:1052800096070008308400FF000420800091202150
-:105290008C860004974201049605000A306300FFE3
-:1052A0003042FFFF004310210045102130E3FFFF93
-:1052B000004310232442FFD830C6FFFF0002140031
-:1052C00000C23025AC8600040A0004C9920300071E
-:1052D000308500FF0005288000B128218CA4000043
-:1052E00097420104306300FF3042FFFF004310216A
-:1052F000004710233C03FFFF008320243042FFFFC0
-:1053000000822025ACA400009203000724020001C3
-:105310001062000600000000240200031062001169
-:10532000000000000A0004EC8E0300109742010404
-:10533000920300049605000A8E24000C00431021FD
-:10534000004510212442FFF23C03FFFF008320248C
-:105350003042FFFF00822025AE24000C0A0004EC3E
-:105360008E03001097420104920300049605000A80
-:105370008E24001000431021004510212442FFEE2E
-:105380003C03FFFF008320243042FFFF00822025E2
-:10539000AE2400108E0300102402000AA742014030
-:1053A000A74301429603000A920200043C04004015
-:1053B00000431021A7420144A7400146974201043F
-:1053C000A7420148240200010E00020CA742014A34
-:1053D0000E000235000000008F62000092030004FE
-:1053E00000002021AF820008974201049606000ABF
-:1053F0003042FFFF00621821006028213C030800B2
-:105400008C6304443C0208008C420440006518216F
-:10541000004410210065382B004710213C01080092
-:10542000AC2304443C010800AC2204409204000474
-:10543000008620212484000A3084FFFF0E0001E949
-:1054400000000000974401043084FFFF0E0001F7C4
-:10545000000000003C021000AF4201780A000587FE
-:105460008F820020148200273062000697420104D8
-:10547000104000673C0240003062400010400005D0
-:1054800000000000000000000000000D000000000F
-:10549000240004208F4201780440FFFE240208000B
-:1054A000AF42017824020008A7420140A740014210
-:1054B0008F8200049743010430420001104000072E
-:1054C0003070FFFF2603FFFE24020002A7420146C0
-:1054D000A74301480A00053F2402000DA7400146EA
-:1054E0002402000DA742014A8F6200002404000834
-:1054F000AF8200080E0001E9000000000A00051953
-:1055000002002021104000423C0240009362000053
-:10551000304300F0240200101062000524020070E5
-:10552000106200358F8200200A00058824420001A5
-:105530008F620000974301043050FFFF3071FFFF7E
-:105540008F4201780440FFFE320200070002102360
-:10555000304200072403000A2604FFFEA74301404F
-:10556000A7420142A7440144A7400146A751014870
-:105570008F42010830420020144000022403000939
-:1055800024030001A743014A0E00020C3C04004022
-:105590000E000235000000003C0708008CE70444C0
-:1055A000021110212442FFFE3C0608008CC6044074
-:1055B0000040182100E33821000010218F65000011
-:1055C00000E3402B00C230212604000800C830212F
-:1055D0003084FFFFAF8500083C010800AC2704447D
-:1055E0003C010800AC2604400E0001E90000000068
-:1055F0000A000519022020210E00013B00000000D6
-:105600008F82002024420001AF8200203C02400033
-:10561000AF4201380A000292000000003084FFFF10
-:1056200030C6FFFF00052C0000A628253882FFFFAA
-:10563000004510210045282B0045102100021C02C6
-:105640003042FFFF0043102100021C023042FFFFE6
-:10565000004310213842FFFF03E000083042FFFF03
-:105660003084FFFF30A5FFFF0000182110800007E5
-:1056700000000000308200011040000200042042BF
-:10568000006518210A0005A10005284003E0000874
-:105690000060102110C0000624C6FFFF8CA200008D
-:1056A00024A50004AC8200000A0005AB2484000499
-:1056B00003E000080000000010A0000824A3FFFF82
-:1056C000AC86000000000000000000002402FFFF84
-:1056D0002463FFFF1462FFFA2484000403E000083F
-:0456E00000000000C6
-:0456E40000000001C1
-:0856E8000A00002A0000000086
-:1056F000000000000000000D747870362E302E314E
-:105700003700000006001100000000000000013614
-:105710000000EA600000000000000000000000003F
-:105720000000000000000000000000000000000079
-:105730000000000000000000000000000000000069
-:105740000000000000000000000000160000000043
-:105750000000000000000000000000000000000049
-:105760000000000000000000000000000000000039
-:105770000000000000000000000000000000000029
-:105780000000138800000000000005DC000000009D
-:105790000000000010000003000000000000000DE9
-:1057A0000000000D3C02080024423D883C03080034
-:1057B0002463403CAC4000000043202B1480FFFDDC
-:1057C000244200043C1D080037BD7FFC03A0F021EB
-:1057D0003C100800261000A83C1C0800279C3D88AF
-:1057E0000E00044E000000000000000D27BDFFB4B5
-:1057F000AFA10000AFA20004AFA30008AFA4000C4B
-:10580000AFA50010AFA60014AFA70018AFA8001CEA
-:10581000AFA90020AFAA0024AFAB0028AFAC002C8A
-:10582000AFAD0030AFAE0034AFAF0038AFB8003C22
-:10583000AFB90040AFBC0044AFBF00480E000591B7
-:10584000000000008FBF00488FBC00448FB90040AB
-:105850008FB8003C8FAF00388FAE00348FAD003072
-:105860008FAC002C8FAB00288FAA00248FA90020BA
-:105870008FA8001C8FA700188FA600148FA50010FA
-:105880008FA4000C8FA300088FA200048FA100003A
-:1058900027BD004C3C1B60048F7A5030377B50286A
-:1058A00003400008AF7A00008F86003C3C03900064
-:1058B0003C0280000086282500A32025AC4400205F
-:1058C0003C0380008C67002004E0FFFE0000000025
-:1058D00003E00008000000000A000070240400013A
-:1058E0008F85003C3C0480003483000100A3102518
-:1058F00003E00008AC82002003E000080000102153
-:105900003084FFFF30A5FFFF108000070000182142
-:10591000308200011040000200042042006518217E
-:105920001480FFFB0005284003E000080060102100
-:1059300010C00007000000008CA2000024C6FFFF7A
-:1059400024A50004AC82000014C0FFFB24840004E2
-:1059500003E000080000000010A0000824A3FFFFDF
-:10596000AC86000000000000000000002402FFFFE1
-:105970002463FFFF1462FFFA2484000403E000089C
-:105980000000000090AA00318FAB00108CAC0040EA
-:105990003C0300FF8D680004AD6C00208CAD00441A
-:1059A00000E060213462FFFFAD6D00248CA7004849
-:1059B0003C09FF000109C024AD6700288CAE004CF3
-:1059C0000182C82403197825AD6F0004AD6E002C48
-:1059D0008CAD0038314A00FFAD6D001C94A9003237
-:1059E0003128FFFFAD68001090A70030A5600002CD
-:1059F000A1600004A167000090A30032306200FFA4
-:105A00000002198210600005240500011065000ED7
-:105A10000000000003E00008A16A00018CD8002803
-:105A2000354A0080AD7800188CCF0014AD6F00149B
-:105A30008CCE0030AD6E00088CC4002CA16A000131
-:105A400003E00008AD64000C8CCD001CAD6D0018A7
-:105A50008CC90014AD6900148CC80024AD6800081E
-:105A60008CC70020AD67000C8CC200148C830070C2
-:105A70000043C82B13200007000000008CC2001454
-:105A8000144CFFE400000000354A008003E00008E9
-:105A9000A16A00018C8200700A0000E6000000008C
-:105AA0009089003027BDFFF88FA8001CA3A9000033
-:105AB0008FA300003C0DFF8035A2FFFF8CAC002CB3
-:105AC00000625824AFAB0000A100000400C05821C0
-:105AD000A7A000028D06000400A048210167C8218C
-:105AE0008FA50000008050213C18FF7F032C20264A
-:105AF0003C0E00FF2C8C0001370FFFFF35CDFFFF60
-:105B00003C02FF0000AFC82400EDC02400C278248E
-:105B1000000C1DC00323682501F87025AD0D0000A1
-:105B2000AD0E00048D240024AFAD0000AD040008CC
-:105B30008D2C00202404FFFFAD0C000C9547003293
-:105B400030E6FFFFAD0600109145004830A200FF8F
-:105B5000000219C2506000018D240034AD0400140D
-:105B60008D4700388FAA001827BD0008AD0B00280C
-:105B7000AD0A0024AD07001CAD00002CAD000018DC
-:105B800003E00008AD00002027BDFFE0AFB2001821
-:105B9000AFB10014AFB00010AFBF001C9098003040
-:105BA00000C088213C0D00FF330F007FA0CF000014
-:105BB000908E003135ACFFFF3C0AFF00A0CE000103
-:105BC00094A6001EA22000048CAB00148E290004B1
-:105BD00000A08021016C2824012A4024008090210B
-:105BE00001052025A6260002AE240004260500207B
-:105BF000262400080E00009224060002924700307E
-:105C0000260500282624001400071E0000031603A2
-:105C100024060004044000032403FFFF96590032C9
-:105C20003323FFFF0E000092AE2300102624002431
-:105C30008FBF001C8FB200188FB100148FB00010FE
-:105C400024050003000030210A00009C27BD00202D
-:105C500027BDFFD8AFB1001CAFB00018AFBF002008
-:105C600090A900302402000100E050213123003FC0
-:105C700000A040218FB000400080882100C0482152
-:105C8000106200148FA70038240B000500A020210B
-:105C900000C02821106B0013020030210E000128E3
-:105CA000000000009225007C30A400021080000358
-:105CB00026030030AE000030260300348FBF0020E2
-:105CC0008FB1001C8FB000180060102103E00008A5
-:105CD00027BD00280E0000A7AFB000100A00016F1A
-:105CE000000000008FA3003C01002021012028219A
-:105CF00001403021AFA300100E0000EEAFB0001441
-:105D00000A00016F000000003C06800034C20E0053
-:105D10008C4400108F850044ACA400208C430018F4
-:105D200003E00008ACA300243C06800034C20E004F
-:105D30008C4400148F850044ACA400208C43001CCC
-:105D400003E00008ACA300249382000C1040001B69
-:105D50002483000F2404FFF00064382410E00019AD
-:105D6000978B00109784000E9389000D3C0A601CED
-:105D70000A0001AC01644023010370210064282360
-:105D80001126000231C2FFFF30A2FFFF0047302B77
-:105D900050C0000E00E448218D4D000C31A3FFFFE0
-:105DA00000036400000C2C0304A1FFF30000302169
-:105DB00030637FFF0A0001A42406000103E000080D
-:105DC000000000009784000E00E448213123FFFF0B
-:105DD0003168FFFF0068382B54E0FFF8A783000EFE
-:105DE000938A000D11400005240F0001006BC023B1
-:105DF000A380000D03E00008A798000E006BC023ED
-:105E0000A38F000D03E00008A798000E03E0000830
-:105E10000000000027BDFFE8AFB000103C1080007C
-:105E200036030140308BFFFF93AA002BAFBF001455
-:105E3000A46B000436040E009488001630C600FFE0
-:105E40008FA90030A4680006AC650008A0660012A7
-:105E5000A46A001AAC6700208FA5002CA469001862
-:105E6000012020210E000198AC6500143C021000B6
-:105E7000AE0201788FBF00148FB0001003E000085D
-:105E800027BD00188F8500002484000727BDFFF878
-:105E90003084FFF83C06800094CB008A316AFFFF13
-:105EA000AFAA00008FA90000012540232507FFFFAE
-:105EB00030E31FFF0064102B1440FFF700056882D9
-:105EC000000D288034CC400000AC102103E0000815
-:105ED00027BD00088F8200002486000730C5FFF828
-:105EE00000A2182130641FFF03E00008AF84000007
-:105EF0008F87003C8F84004427BDFFB0AFB70044BC
-:105F0000AFB40038AFB1002CAFBF0048AFB600400F
-:105F1000AFB5003CAFB30034AFB20030AFB0002833
-:105F20003C0B80008C860024AD6700808C8A0020AA
-:105F300035670E0035690100ACEA00108C8800243A
-:105F40008D2500040000B821ACE800188CE3001097
-:105F500000A688230000A021ACE300148CE2001806
-:105F6000ACE2001C122000FE00E0B021936C00089F
-:105F7000118000F400000000976F001031EEFFFF69
-:105F8000022E682B15A000EF000000009772001091
-:105F90003250FFFFAED000003C0380008C74000044
-:105FA000329300081260FFFD0000000096D8000840
-:105FB0008EC700043305FFFF30B5000112A000E4D6
-:105FC000000000000000000D30BFA0402419004078
-:105FD00013F9011B30B4A000128000DF00000000A4
-:105FE000937300081260000800000000976D001015
-:105FF00031ACFFFF00EC202B1080000330AE0040DE
-:1060000011C000D500000000A7850040AF87003810
-:106010009363000802202821AFB10020146000F52E
-:1060200027B40020AF60000C978F004031F1400092
-:1060300016200002240300162403000E2405400746
-:10604000A363000AAF650014938A00428F700014A6
-:10605000315500010015124002024825AF690014B5
-:10606000979F00408F78001433F9001003194025E2
-:10607000AF680014979200403247000810E0016EAC
-:10608000000000008F6700143C1210003C118000DB
-:1060900000F27825AF6F001436230E00946E000ACC
-:1060A0003C0D81002406000E31CCFFFF018D202520
-:1060B000AF640004A36600029373000A3406FFFC79
-:1060C000266B0004A36B000A979800403308200059
-:1060D0001100015F000000003C05800034A90E00A3
-:1060E000979900409538000C97870040001940426E
-:1060F0003312C0003103000300127B0330F11000A3
-:10610000006F68250011720301AE6025000C20C0ED
-:10611000A764001297930040936A000A0013598203
-:106120003175003C02AA10212450003CA3700009E4
-:10613000953F000C33F93FFFA779001097700012CC
-:10614000936900090130F82127E5000230B9000702
-:106150000019C02333080007A368000B93710009DE
-:1061600097720012976F0010322700FF8F9100384E
-:10617000978D004000F21821006F702101C6602148
-:1061800031A6004010C000053185FFFF00B1102B83
-:106190003C12800010400017000098210225A82B17
-:1061A00056A0013E8FA500203C048000348A0E00DA
-:1061B0008D5300143C068000AD5300108D4B001C25
-:1061C000AD4B0018AD4500008CCD000031AC00088F
-:1061D0001180FFFD34CE0E0095C3000800A0882179
-:1061E00000009021A78300408DC600042413000105
-:1061F000AF860038976F001031F5FFFF8E9F0000CB
-:1062000003F1282310A0011FAE850000936200084F
-:10621000144000DD000000000E0001E7240400101F
-:106220008F900048004028213C023200320600FFD7
-:10623000000654000142F82526090001AF890048F4
-:10624000ACBF00009379000997780012936F000AA1
-:10625000332800FF3303FFFF0103382100076C00E0
-:1062600031EE00FF01AE6025ACAC00048F84004825
-:10627000978B0040316A20001140010AACA400084D
-:1062800097640012308BFFFF06400108ACAB000C96
-:10629000978E004031C5000814A000022628000691
-:1062A000262800023C1F800037E70E0094F90014F6
-:1062B0008CE5001C8F670004937800023324FFFFF5
-:1062C000330300FFAFA300108F6F0014AFA80018B6
-:1062D0000E0001CBAFAF0014240400100E0001FB30
-:1062E000000000008E920000164000050000000033
-:1062F0008F7800142403FFBF0303A024AF7400149D
-:106300008F67000C00F5C821AF79000C9375000869
-:1063100016A0000800000000126000060000000047
-:106320008F6800143C0AEFFF3549FFFE0109F8248D
-:10633000AF7F0014A37300088FA500200A00034F4D
-:1063400002202021AED100000A00022D3C03800073
-:1063500014E0FF1E30BFA0400E0001900000A021FD
-:106360002E9100010237B02512C000188FBF0048DF
-:106370008F87003C24170F0010F700D43C068000E4
-:106380008CD901780720FFFE241F0F0010FF00F6B4
-:1063900034CA0E008D56001434C701402408024050
-:1063A000ACF600048D49001C3C141000ACE9000858
-:1063B000A0E00012A4E0001AACE00020A4E0001865
-:1063C000ACE80014ACD401788FBF00488FB700440C
-:1063D0008FB600408FB5003C8FB400388FB30034C7
-:1063E0008FB200308FB1002C8FB0002803E000087E
-:1063F00027BD00508F910038978800403C128000E4
-:106400000220A8213107004014E0FF7C0000982101
-:10641000977900108F9200383338FFFF131200A8CD
-:10642000000020210080A021108000F300A088211E
-:106430001620FECE000000000A00031F2E9100016E
-:106440003C0380008C6201780440FFFE24080800B1
-:106450008F860000AC6801783C038000946D008A50
-:1064600031ACFFFF01865823256AFFFF31441FFF2F
-:106470002C8900081520FFF9000000008F8F0048CC
-:10648000347040008F83003C00E0A021240E0F00F8
-:1064900025E70001AF87004800D03021023488236F
-:1064A0003C08800031F500FF106E00052407000154
-:1064B00093980042331300010013924036470001C5
-:1064C000001524003C0A0100008A4825ACC90000E0
-:1064D0008F82004830BF003630B90008ACC20004DB
-:1064E0001320009900FF982535120E009650000ADF
-:1064F0008F8700003C0F81003203FFFF24ED00086E
-:1065000035060140006F60253C0E100031AB1FFFC7
-:10651000269200062405000EACCC0020026E9825C1
-:10652000A4C5001AAF8B0000A4D2001816200008E2
-:106530003C1080008F89003C24020F005122000291
-:1065400024170001367300400E0001883C108000C3
-:1065500036060E008CCB0014360A01400240202182
-:10656000AD4B00048CC5001CAD450008A1550012C0
-:10657000AD5300140E0001983C151000AE150178C3
-:106580000A00035200000000936F0009976E00128A
-:10659000936D000B31E500FF00AE202131AC00FF10
-:1065A000008C80212602000A3050FFFF0E0001E718
-:1065B000020020218F8600483C0341003C058000FA
-:1065C00024CB0001AF8B0048936A00099769001241
-:1065D00030C600FF315F00FF3128FFFF03E838219C
-:1065E00024F900020006C4000319782501E3702590
-:1065F000AC4E00008F6D000C34A40E00948B001480
-:1066000001B26025AC4C00048C85001C8F6700042F
-:10661000936A00023164FFFF314900FFAFA9001007
-:106620008F680014AFB100180E0001CBAFA80014A2
-:106630000A0002FD02002021AF600004A3600002F6
-:1066400097980040330820001500FEA30000302179
-:10665000A760001297840040936B000A3C108000F2
-:1066600030931F0000135183014BA82126A200285C
-:10667000A362000936090E00953F000C0A0002953E
-:10668000A77F00108F700014360900400E000188AB
-:10669000AF6900140A0002C9000000000A00034F9D
-:1066A000000020210641FEFAACA0000C8CAC000CCE
-:1066B0003C0D8000018D90250A0002EAACB2000C6E
-:1066C000000090210A0002C5241300011280000777
-:1066D0003C028000344B0E009566000830D3004029
-:1066E00012600049000000003C0680008CD0017858
-:1066F0000600FFFE34C50E0094B500103C030500F3
-:1067000034CC014032B8FFFF03039025AD92000C5A
-:106710008CAF0014240D20003C041000AD8F000449
-:106720008CAE001CAD8E0008A1800012A580001A5E
-:10673000AD800020A5800018AD8D0014ACC4017898
-:106740000A0003263C0680008F9F00003518014098
-:106750002692000227F9000833281FFFA71200180D
-:106760000A000391AF8800003C02800034450140DC
-:10677000ACA0000C1280001B34530E0034510E00EC
-:106780008E370010ACB700048E2400183C0B80003C
-:10679000ACA400083570014024040040A20000129F
-:1067A0008FBF0048A600001A8FB70044AE0000203B
-:1067B0008FB60040A60000188FB5003CAE04001450
-:1067C0008FB400388FB300348FB200308FB1002CFB
-:1067D0008FB000283C02100027BD005003E00008E5
-:1067E000AD6201788E660014ACA600048E64001CB5
-:1067F0000A00042A3C0B80000E0001902E9100013B
-:106800000A0003200237B025000000000000000D40
-:1068100000000000240003690A0004013C06800017
-:1068200027BDFFD8AFBF00203C0980003C1F20FFE0
-:10683000AFB200183C07600035320E002402001091
-:1068400037F9FFFDACE23008AFB3001CAFB1001464
-:10685000AFB00010AE5900000000000000000000C2
-:106860000000000000000000000000003C1800FFD5
-:106870003713FFFDAE5300003C0B60048D705000D9
-:106880002411FF7F3C0E00020211782435EC380CF5
-:1068900035CD0109ACED4C18240A0009AD6C50004F
-:1068A0008CE80438AD2A0008AD2000148CE54C1C9F
-:1068B0003106FFFF38C42F7100051E023062000F41
-:1068C0002486C0B310400007AF8200088CE54C1C42
-:1068D0003C09001F3528FC0000A81824000321C231
-:1068E000AF8400048CF108083C0F57092412F00013
-:1068F0000232702435F0001001D0602601CF6826E6
-:106900002DAA00012D8B0001014B382550E0000914
-:10691000A380000C3C1F601C8FF8000824190001A4
-:10692000A399000C33137C00A7930010A780000EDE
-:10693000A380000DAF80004814C00003AF800000AA
-:106940003C066000ACC0442C0E0005B93C10800031
-:106950000E000F24361101003C12080026523DF0B3
-:106960003C13080026733E708E030000386400015B
-:10697000308200011440FFFC3C0B800A8E26000090
-:106980002407FF8024C90240312A007F014B4021A7
-:1069900001272824AE060020AF880044AE0500245D
-:1069A0003C048000AF86003C8C8C01780580FFFEA3
-:1069B00024180800922F0008AC980178A38F004299
-:1069C000938E004231CD000111A0000F24050D006F
-:1069D00024DFF8002FF903011320001C000629C250
-:1069E00024A4FFF000041042000231400E00020215
-:1069F00000D2D8213C0240003C068000ACC20138E5
-:106A00000A0004A00000000010C50023240D0F00A0
-:106A100010CD00273C1F800837F900809338000014
-:106A2000240E0050330F00FF15EEFFF33C02400030
-:106A30000E000A40000000003C0240003C068000BE
-:106A4000ACC201380A0004A0000000008F830004DB
-:106A500000A3402B1500000B8F8B0008006B50210A
-:106A60002547FFFF00E5482B1520000600A3602303
-:106A7000000C19400E0002020073D8210A0004C461
-:106A80003C0240000000000D0E0002020000000069
-:106A90000A0004C43C0240003C1B0800277B3F70F6
-:106AA0000E000202000000000A0004C43C02400084
-:106AB0003C1B0800277B3F900E00020200000000F4
-:106AC0000A0004C43C0240003C0660043C09080083
-:106AD00025290104ACC9502C8CC850003C0580000D
-:106AE0003C02000235070080ACC750003C0408009F
-:106AF000248415A43C0308002463155CACA500089D
-:106B0000ACA2000C3C010800AC243D803C01080014
-:106B1000AC233D8403E000082402000100A03021E2
-:106B20003C1C0800279C3D883C0C04003C0B0002E8
-:106B3000008B3826008C40262CE200010007502BE9
-:106B40002D050001000A48803C03080024633D80B5
-:106B5000004520250123182110800003000010218A
-:106B6000AC6600002402000103E000080000000001
-:106B70003C1C0800279C3D883C0B04003C0A00029A
-:106B8000008A3026008B38262CC200010006482BD4
-:106B90002CE50001000940803C03080024633D808F
-:106BA0000045202501031821108000050000102158
-:106BB0003C0C0800258C155CAC6C00002402000124
-:106BC00003E00008000000003C0900023C0804004B
-:106BD00000883026008938262CC300010080282137
-:106BE0002CE40001008310251040000B0000302130
-:106BF0003C1C0800279C3D883C0A80008D4E000804
-:106C00002406000101CA6825AD4D00088D4C000C1A
-:106C100001855825AD4B000C03E0000800C0102191
-:106C20003C1C0800279C3D883C0580008CA6000C7D
-:106C3000000420272402000100C4182403E00008F7
-:106C4000ACA3000C3C0200021082000B3C0560006B
-:106C50003C070400108700030000000003E0000868
-:106C6000000000008CA908D0240AFFFD012A40245E
-:106C700003E00008ACA808D08CA408D02406FFFECE
-:106C80000086182403E00008ACA308D03C05601A75
-:106C900034A600108CC3008027BDFFF88CC500848B
-:106CA000AFA3000093A4000024020001108200039F
-:106CB000AFA5000403E0000827BD000893A700016A
-:106CC00014E0001497AC000297B800023C0F80005B
-:106CD000330EFFFC01CF6821ADA50000A3A000008A
-:106CE0003C0660008CC708D02408FFFE3C04601AF4
-:106CF00000E82824ACC508D08FA300048FA20000B0
-:106D00003499001027BD0008AF22008003E000087E
-:106D1000AF2300843C0B8000318AFFFC014B4821EB
-:106D20008D2800000A00057DAFA8000427BDFFE8FC
-:106D3000AFBF00103C1C0800279C3D883C0580002C
-:106D40008CA4000C8CA200043C0300020044282404
-:106D500010A0000A00A318243C0604003C04000212
-:106D60001460000900A610241440000F3C04040025
-:106D70000000000D3C1C0800279C3D888FBF0010C0
-:106D800003E0000827BD00183C0208008C423D804B
-:106D90000040F809000000003C1C0800279C3D88CA
-:106DA0000A0005A68FBF00103C0208008C423D84FB
-:106DB0000040F809000000000A0005AC00000000D7
-:106DC000000411C003E00008244202403C04080013
-:106DD00024843FD42405001A0A00009C00003021BE
-:106DE00027BDFFE0AFB000103C108000AFBF00181F
-:106DF000AFB1001436110100922200090E0005B651
-:106E00003044007F8E3F00008F89003C3C0F0080A3
-:106E100003E26021258800400049F821240DFF800D
-:106E2000310E00783198007835F9000135F1000213
-:106E30000319382501D14825010D302403ED5824CC
-:106E4000018D2824240A004024040080240300C06B
-:106E5000AE0B0024AE000810AE0A0814AE040818E9
-:106E6000AE03081CAE050804AE070820AE060808ED
-:106E7000AE090824360909009539000C3605098049
-:106E800033ED007F3338FFFF001889C0AE110800D2
-:106E9000AE0F0828952C000C8FBF00188FB100147E
-:106EA000318BFFFF000B51C0AE0A002C8CA40050A8
-:106EB0008FB000108CA3003C8D2700048CA8001C10
-:106EC0008CA600383C0E800A01AE102127BD0020A0
-:106ED000AF820044AF840050AF830054AF87004CB2
-:106EE000AF88005C03E00008AF8600603C09080042
-:106EF00091293FF924A800023C05110000093C003B
-:106F000000E8302500C5182524820008AC83000065
-:106F100003E00008AC8000043C0980003523090030
-:106F20009128010B906A001124020028008048215A
-:106F3000314700FF00A0702100C0682131080040E7
-:106F400010E20002340C86DD240C08003C0A8000AC
-:106F500035420A9A94470000354B0A9C35460AA0F0
-:106F600030F9FFFFAD3900008D780000354B0A8005
-:106F700024040001AD3800048CCF0000AD2F0008C0
-:106F80009165001930A300031064009A2864000280
-:106F9000148000B924050002106500A8240F000326
-:106FA000106F00BE35450AA4240A0800118A004D5E
-:106FB00000000000510000423C0B80003C048000B7
-:106FC000348309009067001230E200FF004D782101
-:106FD000000FC880272400013C0A8000354F0900BB
-:106FE00091E50019354C09808D87002830A300FFFA
-:106FF00000031500004758250004C4003C19600038
-:1070000001793025370806FFAD260000AD280004C1
-:107010008DEA002C25280028AD2A00088DEC0030D0
-:10702000AD2C000C8DE50034AD2500108DE400384A
-:10703000AD2400148DE3001CAD2300188DE7002063
-:10704000AD27001C8DE20024AD2200208DF9002820
-:10705000AD3900243C0980003526093C8CCF000066
-:10706000352A0100AD0E0004AD0F00008D4E000C5E
-:107070003523090035250980AD0E0008906C0012FB
-:107080008D47000C8CB900343C18080093183FF869
-:10709000318200FF004D582103277823000B370071
-:1070A0000018240000C4702531E9FFFC01C96825DF
-:1070B00025020014AD0D000C03E00008AD00001027
-:1070C00035780900930600123C05080094A53FE8B6
-:1070D00030C800FF010D5021000A60800A00063C04
-:1070E0000185202115000060000000003C08080018
-:1070F00095083FEE3C06080094C63FE801061021C3
-:107100003C0B80003579090093380011932A00194F
-:1071100035660A80330800FF94CF002A0008608299
-:10712000314500FF978A0058000C1E00000524001E
-:107130003047FFFF006410250047C02501EA3021D9
-:107140003C0B4000030B402500066400AD28000006
-:10715000AD2C0004932500183C03000625280014DC
-:1071600000053E0000E31025AD2200088F24002C0E
-:10717000254F000131EB7FFFAD24000C8F38001C40
-:10718000A78B0058AD3800103C0980003526093C1B
-:107190008CCF0000352A0100AD0E0004AD0F0000B9
-:1071A0008D4E000C3523090035250980AD0E0008F1
-:1071B000906C00128D47000C8CB900343C1808000C
-:1071C00093183FF8318200FF004D582103277823A0
-:1071D000000B37000018240000C4702531E9FFFCC3
-:1071E00001C9682525020014AD0D000C03E000085C
-:1071F000AD0000103C02080094423FF23C0508003C
-:1072000094A53FE835440AA43C07080094E73FE40E
-:10721000948B00000045C8210327C023000B1C00ED
-:107220002706FFF200665025AD2A000CAD200010A5
-:10723000AD2C00140A00063025290018354F0AA489
-:1072400095E50000956400280005140000043C004A
-:107250003459810000EC5825AD39000CAD2B0010DD
-:107260000A000630252900143C0C0800958C3FEEDE
-:107270000A000686258200015460FF4C240A08009B
-:1072800035580AA49706000000061C00006C502523
-:10729000AD2A000C0A000630252900103C03080026
-:1072A00094633FF23C07080094E73FE83C0F080076
-:1072B00095EF3FE494A40000957900280067102121
-:1072C000004F582300041C00001934002578FFEEFD
-:1072D00000D87825346A8100AD2A000CAD2F00104B
-:1072E000AD200014AD2C00180A0006302529001C22
-:1072F00003E00008240207D027BDFFE0AFB200186A
-:10730000AFB10014AFB00010AFBF001C0E00007C86
-:10731000008088218F8800548F87004C3C058008AE
-:1073200034B20080011128213C108000240200802A
-:10733000240300C000A72023AE0208183C068008E2
-:10734000AE03081C18800004AF850054ACC50004CF
-:107350008CC90004AF89004C122000093604098052
-:107360000E00070200000000924C00278E0B0074F4
-:1073700001825004014B3021AE46000C36040980D6
-:107380008C8E001C8F8F005C01CF682319A0000435
-:107390008FBF001C8C90001CAF90005C8FBF001C46
-:1073A0008FB200188FB100148FB000100A00007E59
-:1073B00027BD00208F8600508F8300548F82004CA1
-:1073C0003C05800834A40080AC860050AC83003CAF
-:1073D00003E00008ACA200043C0308008C630054E6
-:1073E00027BDFFF8308400FF2462000130A500FFB4
-:1073F0003C010800AC22005430C600FF3C0780006E
-:107400008CE801780500FFFE3C0C7FFFA3A400037D
-:107410008FAA0000358BFFFF014B4824000627C0D0
-:1074200001244025AFA8000034E201009043000A87
-:10743000A3A000023C1980FFA3A300018FAF0000AE
-:1074400030AE007F3738FFFF01F86024000E6E0079
-:107450003C0A002034E50140018D582535492000C3
-:107460002406FF803C04100027BD0008ACAB000CD4
-:10747000ACA90014A4A00018A0A6001203E0000804
-:10748000ACE40178308800FF30A700FF3C038000A7
-:107490008C6201780440FFFE3C0C8000358A0A00B3
-:1074A0008D4B00203584014035850980AC8B00046C
-:1074B0008D4900240007302B00061540AC890008D8
-:1074C000A088001090A3004CA083002D03E00008CA
-:1074D000A480001827BDFFE8308400FFAFBF001074
-:1074E0000E00076730A500FF8F8300548FBF001088
-:1074F0003C06800034C50140344700402404FF901E
-:107500003C02100027BD0018ACA3000CA0A4001280
-:10751000ACA7001403E00008ACC2017827BDFFE06F
-:107520003C088008AFBF001CAFB20018AFB1001418
-:10753000AFB00010351000808E0600183C078000A8
-:10754000309200FF00C72025AE0400180E00007C1A
-:1075500030B100FF92030005346200080E00007E87
-:10756000A2020005024020210E00077B02202821F4
-:10757000024020218FBF001C8FB200188FB1001471
-:107580008FB0001024050005240600010A00073C06
-:1075900027BD00203C05800034A3098090660008C8
-:1075A00030C200081040000F3C0A01013549080AAA
-:1075B000AC8900008CA80074AC8800043C0708006B
-:1075C00090E73FF830E5001050A00008AC800008BC
-:1075D0003C0D800835AC00808D8B0058AC8B0008CA
-:1075E0002484000C03E00008008010210A0007BF7B
-:1075F0002484000C27BDFFE83C098000AFB00010D8
-:10760000AFBF00143526098090C800092402000687
-:1076100000A05821310300FF352709000080802198
-:10762000240500041062007B2408000294CF005C53
-:107630003C0E020431EDFFFF01AE6025AE0C0000F0
-:1076400090CA0008314400201080000800000000AB
-:1076500090C2004E3C1F010337F90300305800FF71
-:107660000319302524050008AE06000490F9001126
-:1076700090E6001290E40011333800FF0018708289
-:1076800030CF00FF01CF5021014B6821308900FF2E
-:1076900031AAFFFF39230028000A60801460002C03
-:1076A000020C482390E400123C198000372F01009F
-:1076B000308C00FF018B1821000310800045F82159
-:1076C000001F8400360706FFAD270004373F09007E
-:1076D00093EC001193EE0012372609800005C0825A
-:1076E0008DE4000C8CC5003431CD00FF01AB1021BE
-:1076F0000058182100A4F8230008840000033F006C
-:1077000000F0302533F9FFFF318F00FC00D97025E0
-:107710000158202101E9682100045080ADAE000C21
-:107720000E00007C012A80213C088008240B000404
-:10773000350500800E00007EA0AB0009020010217C
-:107740008FBF00148FB0001003E0000827BD0018A1
-:1077500090EC001190E300193C18080097183FEED8
-:10776000318200FF0002F882307000FF001FCE005F
-:1077700000103C000327302500D870253C0F400046
-:1077800001CF68253C198000AD2D0000373F09006E
-:1077900093EC001193EE0012372F01003726098079
-:1077A0000005C0828DE4000C8CC5003431CD00FF93
-:1077B00001AB10210058182100A4F8230008840010
-:1077C00000033F0000F0302533F9FFFF318F00FC4C
-:1077D00000D970250158202101E96821000450805A
-:1077E000ADAE000C0E00007C012A80213C08800810
-:1077F000240B0004350500800E00007EA0AB0009BC
-:10780000020010218FBF00148FB0001003E00008A9
-:1078100027BD00180A0007D12408001227BDFFD099
-:107820003C038000AFB60028AFB50024AFB4002001
-:10783000AFB10014AFBF002CAFB3001CAFB2001843
-:10784000AFB000103467010090E6000B309400FFE9
-:1078500030B500FF30C200300000B0211040009968
-:1078600000008821346409809088000800082E00F8
-:1078700000051E03046000C0240400048F86005429
-:107880003C010800A0243FF83C0C8000AD8000487B
-:107890003C048000348E010091CD000B31A5002006
-:1078A00010A000073C078000349309809272000802
-:1078B0000012860000107E0305E000C43C1F800813
-:1078C00034EC0100918A000B34EB098091690008C7
-:1078D000314400400004402B3123000800C89823A5
-:1078E0001460000224120003000090213C1080006C
-:1078F00036180A8036040900970E002C9083001178
-:107900009089001293050018307F00FF312800FF96
-:10791000024810210002C880930D0018033F78210F
-:1079200001F1302130B100FF00D11821A78E00589D
-:107930003C010800A4263FEE3C010800A4233FF0D0
-:1079400015A00002000000000000000D920B010BCA
-:107950003065FFFF3C010800A4233FF2316A00407C
-:107960003C010800A4203FE83C010800A4203FE4BB
-:107970001140000224A4000A24A4000B3091FFFF50
-:107980000E0001E7022020219206010B3C0C0800AA
-:10799000958C3FF2004020210006698231A700014A
-:1079A0000E000601018728210040202102602821C5
-:1079B0000E00060C024030210E0007AB00402021D3
-:1079C00016C00069004020219212010B325600407F
-:1079D00012C000053C0500FF8C93000034AEFFFF91
-:1079E000026E8024AC9000000E0001FB02202021DA
-:1079F0003C0F080091EF3FF831F100031220001610
-:107A00003C1380088F8200543C0980083528008090
-:107A1000245F0001AD1F003C3C0580088CB90004C8
-:107A200003E02021033FC0231B000002AF9F00544E
-:107A30008CA400040E000702ACA400043C078000E4
-:107A40008CEB00743C04800834830080004B502190
-:107A5000AC6A000C3C138008367000800280202144
-:107A600002A02821A200006B0E0007673C148000D2
-:107A70008F920054368C0140AD92000C8F860048E6
-:107A80003C151000344D000624D60001AF96004886
-:107A90008FBF002CA18600128FB60028AD8D001478
-:107AA0008FB3001CAE9501788FB200188FB50024FB
-:107AB0008FB400208FB100148FB0001003E00008D5
-:107AC00027BD003034640980908F0008000F7600D5
-:107AD000000E6E0305A00033347F090093F8001BED
-:107AE000241900103C010800A0393FF833130002AC
-:107AF0001260FF678F8600548F8200601446FF6516
-:107B00003C0480000E00007C000000003C04800863
-:107B10003485008090A8000924060016310300FF78
-:107B20001066000D0000000090AB00093C07080043
-:107B300090E73FF824090008316400FF34EA0001AF
-:107B40003C010800A02A3FF81089002F240C000AED
-:107B5000108C00282402000C0E00007E00000000A3
-:107B60000A00086A8F8600540E0007C302402821CD
-:107B70000A0008B8004020213C0B8008356A0080CC
-:107B80008D4600548CE9000C1120FF3DAF86005457
-:107B9000240700143C010800A0273FF80A000869E8
-:107BA0003C0C800090910008241200023C01080067
-:107BB000A0323FF8323000201200000B24160001E2
-:107BC0008F8600540A00086A2411000837F80080E4
-:107BD0008F020038AFE200048FF90004AF19003CB7
-:107BE0000A0008763C0780008F8600540A00086A65
-:107BF00024110004A0A200090E00007E0000000075
-:107C00000A00086A8F860054240200140A000944FE
-:107C1000A0A2000927BDFFE8AFB000103C10800013
-:107C2000AFBF001436020100904400090E00076740
-:107C3000240500013C0480089099000E34830080E4
-:107C4000909F000F906F00269089000A33F800FF84
-:107C500000196E000018740031EC00FF01AE5025D1
-:107C6000000C5A00014B3825312800FF3603014033
-:107C70003445600000E830252402FF813C041000F8
-:107C8000AC66000C8FBF0014AC650014A06200123B
-:107C9000AE0401788FB0001003E0000827BD001883
-:107CA00027BDFFE8308400FFAFBF00100E0007675C
-:107CB00030A500FF3C05800034A40140344700405B
-:107CC0002406FF92AC870014A08600128F83005414
-:107CD0008FBF00103C02100027BD0018AC83000CC1
-:107CE00003E00008ACA2017827BDFFD8AFB00010B8
-:107CF000308400FF30B000FF3C058000AFB10014BD
-:107D0000AFBF0020AFB3001CAFB20018000410C218
-:107D100034A6010032030002305100011460000754
-:107D200090D200093C098008353300809268000534
-:107D30003107000810E0000C308A001002402021BA
-:107D40000E00078D02202821240200018FBF002091
-:107D50008FB3001C8FB200188FB100148FB00010C9
-:107D600003E0000827BD00281540003434A50A00B0
-:107D70008CB800248CAF0008130F004B0000382192
-:107D80003C0D800835B30080926C00682406000228
-:107D9000318B00FF116600843C06800034C2010074
-:107DA0009263004C90590009307F00FF53F90004A2
-:107DB0003213007C10E00069000000003213007CE8
-:107DC0005660005C0240202116200009320D00019F
-:107DD0003C0C800035840100358B0A008D65002441
-:107DE0008C86000414A6FFD900001021320D00017A
-:107DF00011A0000E024020213C1880003710010025
-:107E00008E0F000C8F8E005011EE00080000000055
-:107E10000E00084D022028218E19000C3C1F8008FE
-:107E200037F00080AE190050024020210E00077B81
-:107E3000022028210A000999240200013C050800BB
-:107E40008CA5006424A400013C010800AC2400645B
-:107E50001600000D00000000022028210E00077B04
-:107E600002402021926E0068240C000231CD00FFF8
-:107E700011AC0022024020210E00094B000000003E
-:107E80000A000999240200010E0000702404000178
-:107E9000926B0025020B30250E00007EA2660025A5
-:107EA0000A0009DD022028218E6200188CDF000400
-:107EB0008CB9002400021E0217F9FFB13065007F63
-:107EC0009268004C264400013093007F1265004008
-:107ED000310300FF1464FFAB3C0D8008264700010E
-:107EE00030F1007F30E200FF1225000B2407000173
-:107EF000004090210A0009A6241100012405000475
-:107F00000E00073C240600010E00094B0000000093
-:107F10000A000999240200012405FF80024520245B
-:107F200000859026324200FF004090210A0009A6F9
-:107F3000241100010E00084D0220282132070030D4
-:107F400010E0FFA132100082024020210E00078DB8
-:107F5000022028210A000999240200018E690018D4
-:107F60000240202102202821012640250E00096E12
-:107F7000AE6800189264004C24050003240600013A
-:107F80000E00073C308400FF0E0000702404000146
-:107F900092710025021150250E00007EA26A002574
-:107FA0000A000999240200018E6F00183C18800015
-:107FB0000240202101F87025022028210E00077BB5
-:107FC000AE6E00189264004C0A000A2524050004D5
-:107FD000324A0080394900801469FF6A3C0D8008EC
-:107FE0000A0009FE2647000127BDFFC0AFB00018F8
-:107FF0003C108000AFBF0038AFB70034AFB60030E0
-:10800000AFB5002CAFB40028AFB30024AFB200204E
-:108010000E0005BEAFB1001C360201009045000BFA
-:108020000E00098090440008144000E78FBF00381C
-:108030003C08800835070080A0E0006B3606098008
-:1080400090C50000240300503C17080026F73FB0FD
-:1080500030A400FF3C13080026733FC010830003C8
-:108060003C1080000000B82100009821241F00105F
-:108070003611010036120A00361509808E58002488
-:108080008E3400048EAF00208F8C00543C01080019
-:10809000A03F3FF836190A80972B002C8EF600007F
-:1080A000932A00180298702301EC68233C01080011
-:1080B000AC2E3FD43C010800AC2D3FD83C01080059
-:1080C000AC2C3FFCA78B005802C0F809315400FFCC
-:1080D00030490002152000E930420001504000C440
-:1080E0009227000992A90008312800081500000213
-:1080F000241500030000A8213C0A80003543090034
-:1081000035440A008C8D002490720011907000128A
-:10811000907F0011325900FF321100FF02B110218F
-:108120000002C08033EF00FF0319B021028F7021DD
-:1081300002D4602125CB00103C010800A4363FEE9C
-:108140003C010800AC2D40003C010800A42C3FF08D
-:108150003C010800A42B3FEC355601003554098042
-:1081600035510E008F8700548F89005C8E8500206A
-:1081700024080006012730233C010800AC283FF406
-:1081800000A7282304C000B50000902104A000B37C
-:1081900000C5502B114000B5000000003C01080054
-:1081A000AC263FD88E6200000040F80900000000B5
-:1081B0003046000214C0007400408021304B0001A2
-:1081C000556000118E6200043C0D08008DAD3FDC4F
-:1081D0003C0EC0003C04800001AE6025AE2C0000C7
-:1081E0008C980000330F000811E0FFFD0000000034
-:1081F000963F000824120001A79F00408E3900041A
-:10820000AF9900388E6200040040F80900000000B9
-:108210000202802532030002146000B30000000057
-:108220003C09080095293FE43C06080094C63FF04D
-:108230003C0A0800954A3FE63C0708008CE73FDC13
-:10824000012670213C0308008C6340003C080800B4
-:1082500095083FFA01CA20218ED9000C00E9282197
-:10826000249F000200A878210067C02133E4FFFFAB
-:10827000AF9900503C010800AC3840003C010800B8
-:10828000A42F3FE83C010800A42E3FF20E0001E7B6
-:10829000000000008F8D0048004020213C010800B4
-:1082A000A02D3FF98E62000825AC0001AF8C00487C
-:1082B0000040F809000000008F85005402A0302122
-:1082C0000E00060C004020210E0007AB00402021CC
-:1082D0008E6B000C0160F809004020213C0A080068
-:1082E000954A3FF23C06080094C63FE60146482105
-:1082F000252800020E0001FB3104FFFF3C050800A9
-:108300008CA53FD43C0708008CE73FDC00A7202366
-:108310003C010800AC243FD414800006000000009B
-:108320003C0208008C423FF4344B00403C01080002
-:10833000AC2B3FF4124000438F8E00448E2D001072
-:108340008F920044AE4D00208E2C0018AE4C0024BD
-:108350003C04080094843FE80E000704000000007D
-:108360008F9F00548E6700103C010800AC3F3FFC1B
-:1083700000E0F809000000003C1908008F393FD4E4
-:108380001720FF798F870054979300583C11800E77
-:10839000321601000E000733A633002C16C000452C
-:1083A000320300105460004C8EE500043208004097
-:1083B0005500001D8EF000088EE4000C0080F809C6
-:1083C000000000008FBF00388FB700348FB6003038
-:1083D0008FB5002C8FB400288FB300248FB20020FB
-:1083E0008FB1001C8FB0001803E0000827BD0040CB
-:1083F0008F86003C36110E0000072E0000A62025B7
-:10840000AE0400808E4300208E500024AFA30010E5
-:10841000AE2300148FB20010AE320010AE30001C3C
-:108420000A000A7FAE3000180200F80900000000C0
-:108430008EE4000C0080F809000000000A000B38F0
-:108440008FBF003824180001240F0001A5C00020B0
-:10845000A5D800220A000B1AADCF00243C01080069
-:10846000AC203FD80A000AB08E6200003C01080030
-:10847000AC253FD80A000AB08E62000092240009A1
-:108480000E00077B000028218FBF00388FB7003413
-:108490008FB600308FB5002C8FB400288FB3002426
-:1084A0008FB200208FB1001C8FB0001803E00008CD
-:1084B00027BD00403C14800092950109000028214E
-:1084C0000E00084D32A400FF320300105060FFB8C8
-:1084D000320800408EE5000400A0F809000000000A
-:1084E0000A000B32320800405240FFA89793005810
-:1084F0008E3400148F930044AE7400208E35001C1F
-:10850000AE7500240A000B29979300588F8200143F
-:108510000004218003E00008008210213C0780084D
-:1085200034E200809043006900804021106000091F
-:108530003C0401003C0708008CE73FFC8F830030BF
-:1085400000E32023048000089389001C14E3000347
-:108550000100202103E00008008010213C040100FC
-:1085600003E00008008010211120000B0067382371
-:108570003C0D800035AC0980918B007C316A000293
-:10858000114000202409003400E9702B15C0FFF1D0
-:108590000100202100E938232403FFFC00A3C824A4
-:1085A00000E3C02400F9782B15E0FFEA030820213E
-:1085B00030C400030004102314C000143049000329
-:1085C0000000302100A9782101E6702100EE682B1F
-:1085D00011A0FFE03C0401002D3800010006C82B6B
-:1085E000010548210319382414E0FFDA2524FFFC93
-:1085F0002402FFFC00A218240068202103E00008E8
-:10860000008010210A000BA8240900303C0C8000D7
-:108610003586098090CB007C316A00041540FFE963
-:10862000240600040A000BB7000030213C030800B8
-:108630008C63005C8F82001827BDFFE0AFBF00187D
-:10864000AFB1001410620005AFB00010000329C0E4
-:1086500024A40280AF840014AF8300183C10800073
-:1086600036020A0094450032361101000E000B89D3
-:1086700030A43FFF8E240000241FFF803C110080A7
-:108680000082C021031F60243309007F000CC94011
-:1086900003294025330E0078362F00033C0D1000CF
-:1086A000010D502501CF5825AE0C00283608098051
-:1086B000AE0C080CAE0B082CAE0A08309103006912
-:1086C0003C06800C0126382110600006AF8700347C
-:1086D0008D09003C8D03006C0123382318E00082D3
-:1086E000000000003C0B8008356A00803C108000D0
-:1086F000A1400069360609808CC200383C06800023
-:1087000034C50A0090A8003C310C00201180001AEA
-:10871000AF820030240D00013C0E800035D10A00EC
-:10872000A38D001CAF8000248E2400248F8500249C
-:10873000240D0008AF800020AF8000283C01080015
-:10874000A42D3FE63C010800A4203FFA0E000B8D4B
-:10875000000030219228003C8FBF00188FB1001418
-:108760008FB0001000086142AF82002C27BD0020AE
-:1087700003E000083182000190B80032240E0001AD
-:10878000330F00FF000F2182108E004124190002D8
-:108790001099006434C40AC03C03800034640A00A9
-:1087A0008C8F002415E0001E34660900909F003075
-:1087B0002418000533F9003F1338004E240300014C
-:1087C0008F860020A383001CAF860028AF8600247C
-:1087D0003C0E800035D10A008E2400248F850024B1
-:1087E000240D00083C010800A42D3FE63C010800D0
-:1087F000A4203FFA0E000B8D000000009228003CE0
-:108800008FBF00188FB100148FB0001000086142B4
-:10881000AF82002C27BD002003E000083182000158
-:108820008C8A00088C8B00248CD000643C0E800065
-:1088300035D10A00014B2823AF900024A380001CEF
-:10884000AF8500288E2400248F8600208F85002489
-:10885000240D00083C010800A42D3FE63C0108005F
-:10886000A4203FFA0E000B8D000000009228003C6F
-:108870008FBF00188FB100148FB000100008614244
-:10888000AF82002C27BD002003E0000831820001E8
-:1088900090A200303051003F5224002834C50AC055
-:1088A0008CB000241600002234CB09008CA60048AE
-:1088B0003C0A7FFF3545FFFF00C510243C0E8000B9
-:1088C000AF82002035C509008F8800208CAD006084
-:1088D000010D602B15800002010020218CA4006096
-:1088E0000A000C2CAF8400208D02006C0A000C06DC
-:1088F0003C0680008C8200488F8600203C097FFF68
-:108900003527FFFF004788243C048008240300012A
-:10891000AF910028AC80006CA383001C0A000C3AC5
-:10892000AF8600248C9F00140A000C2CAF9F0020FF
-:108930008D6200680A000C763C0E800034C4098009
-:108940008C8900708CA300140123382B10E00004E4
-:10895000000000008C8200700A000C763C0E800043
-:108960008CA200140A000C763C0E80008F85002437
-:1089700027BDFFE0AFBF0018AFB1001414A000087E
-:10898000AFB000103C04800034870A0090E600304D
-:108990002402000530C3003F106200B9348409008E
-:1089A0008F91002000A080213C048000348E0A00BA
-:1089B0008DCD00043C0608008CC63FD831A73FFF90
-:1089C00000E6602B5580000100E03021938F001CF1
-:1089D00011E0007800D0282B349F098093F9007CA7
-:1089E00033380002130000792403003400C3102B35
-:1089F000144000D90000000000C3302300D0282B11
-:108A00003C010800A4233FE414A0006E02001821DA
-:108A10003C0408008C843FD40064402B55000001C6
-:108A2000006020213C05800034A90A00912A003C06
-:108A30003C010800AC243FDC3143002014600003FB
-:108A40000000482134AB0E008D6900188F88002C7F
-:108A50000128202B1080005F000000003C0508006A
-:108A60008CA53FDC00A96821010D602B1180005C02
-:108A700000B0702B0109382300E028213C010800D8
-:108A8000AC273FDC12000003240AFFFC10B0008D6D
-:108A90003224000300AA18243C010800A4203FFA55
-:108AA0003C010800AC233FDC006028218F840024B7
-:108AB000120400063C0B80088D6C006C0200202123
-:108AC000AF91002025900001AD70006C8F8D0028C3
-:108AD00000858823AF91002401A52023AF840028BE
-:108AE0001220000224070018240700103C188008F8
-:108AF0003706008090CF00683C010800A0273FF8AF
-:108B00002407000131EE00FF11C7004700000000FC
-:108B100014800018000028213C06800034D1098010
-:108B200034CD010091A600098E2C001824C4000148
-:108B3000000C86023205007F308B007F1165007FBC
-:108B40002407FF803C19800837290080A124004CAD
-:108B50003C0808008D083FF4241800023C0108007E
-:108B6000A0384039350F00083C010800AC2F3FF415
-:108B7000240500103C02800034440A009083003C2D
-:108B8000307F002013E0000500A02021240A00010E
-:108B90003C010800AC2A3FDC34A400018FBF001860
-:108BA0008FB100148FB000100080102103E0000886
-:108BB00027BD00203C010800A4203FE410A0FF9442
-:108BC000020018210A000CCA00C018210A000CC1BA
-:108BD000240300303C0508008CA53FDC00B0702B5E
-:108BE00011C0FFA8000000003C19080097393FE4BD
-:108BF0000325C0210307782B11E000072CAA0004ED
-:108C00003C0360008C625404305F003F17E0FFE3D8
-:108C1000240400422CAA00041140FF9A24040042BC
-:108C20000A000D2E8FBF00181528FFB900000000A4
-:108C30008CCA00183C1F800024020002015F182526
-:108C4000ACC3001837F90A00A0C200689329003CA1
-:108C50002404000400A01021312800203C01080059
-:108C6000A024403911000002240500102402000154
-:108C70003C010800AC223FD40A000D243C028000D5
-:108C80008F8800288C8900600109282B14A000021D
-:108C9000010088218C9100603C048000348B0E0020
-:108CA0008D640018240A00010220282102203021AE
-:108CB000A38A001C0E000B8D022080210A000CB03C
-:108CC000AF82002C000458231220000731640003F7
-:108CD0003C0E800035C7098090ED007C31AC00046B
-:108CE00015800019248F00043C010800A4243FFAD9
-:108CF0003C1F080097FF3FFA03E5C82100D9C02BAD
-:108D00001300FF6B8F8400242CA6000514C0FFA362
-:108D10002404004230A200031440000200A21823E1
-:108D200024A3FFFC3C010800AC233FDC3C0108000D
-:108D3000A4203FFA0A000CF10060282100C770242B
-:108D40000A000D1701C720263C010800A42F3FFA96
-:108D50000A000D82000000003C010800AC203FDC4E
-:108D60000A000D2D240400428F8300283C0580005A
-:108D700034AA0A0014600006000010219147003058
-:108D80002406000530E400FF108600030000000008
-:108D900003E0000800000000914B0048316900FF2B
-:108DA000000941C21500FFFA3C0680083C04080097
-:108DB00094843FE43C0308008C633FFC3C190800AA
-:108DC0008F393FDC3C0F080095EF3FFA0064C0216B
-:108DD0008CCD00040319702101CF602134AB0E004B
-:108DE000018D282318A0001D00000000914F004CA9
-:108DF0008F8C0034956D001031EE00FF8D890004DA
-:108E000001AE30238D8A000030CEFFFF000E290016
-:108E10000125C82100003821014720210325182BF6
-:108E20000083C021AD990004AD980000918F000A25
-:108E300001CF6821A18D000A956500128F8A003448
-:108E4000A5450008954B003825690001A549003863
-:108E50009148000D35070008A147000D03E0000808
-:108E60000000000027BDFFD8AFB000189388001C99
-:108E70008FB000143C0A80003C197FFF8F870024CC
-:108E80003738FFFFAFBF0020AFB1001C355F0A00CD
-:108E90000218182493EB003C00087FC03C02BFFF7F
-:108EA000006F60252CF000013449FFFF3C1F0800D3
-:108EB0008FFF3FFC8F9900303C18080097183FF255
-:108EC00001897824001047803C07EFFF3C05F0FF44
-:108ED00001E818253C1180003169002034E2FFFFD1
-:108EE00034ADFFFF362E098027A5001024060002AE
-:108EF00003F96023270B0002354A0E000062182494
-:108F00000080802115200002000040218D48001CB7
-:108F1000A7AB0012058000392407000030E800FFED
-:108F200000083F00006758253C028008AFAB0014E2
-:108F3000344F008091EA00683C08080091083FF92E
-:108F40003C09DFFF352CFFFF000AF82B3C0208002C
-:108F500094423FECA3A80011016CC024001FCF4035
-:108F6000031918258FA70010AFA300143C0C0800AC
-:108F7000918C3FFBA7A200168FAB001400ED482494
-:108F80003C0F01003C0A0FFF012FC8253198000358
-:108F9000355FFFFF016D40243C027000033F382421
-:108FA00000181E0000E2482501037825AFAF001429
-:108FB000AFA9001091CC007C0E000092A3AC00156C
-:108FC000362D0A0091A6003C30C400201080000617
-:108FD000260200083C11080096313FE8262EFFFFCC
-:108FE0003C010800A42E3FE88FBF00208FB1001C79
-:108FF0008FB0001803E0000827BD00288F8B002CDD
-:10900000010B502B5540FFC5240700010A000E0E2E
-:1090100030E800FF9383001C3C02800027BDFFD88E
-:1090200034480A0000805021AFBF002034460AC0F7
-:10903000010028211060000E34440980910700309F
-:10904000240B00058F89002030EC003F118B000BB2
-:1090500000003821AFA900103C0B80088D69006C1E
-:10906000AFAA00180E00015AAFA90014A380001C7B
-:109070008FBF002003E0000827BD00288D1F004897
-:109080003C1808008F183FDC8F9900283C027FFFB6
-:109090008D0800443443FFFFAFA900103C0B80084B
-:1090A0008D69006C03E370240319782101CF6823D4
-:1090B00001A83821AFAA00180E00015AAFA9001468
-:1090C0000A000E62A380001C3C05800034A60A0042
-:1090D00090C7003C3C06080094C63FFA3C020800DA
-:1090E0008C423FF430E30020000624001060001E94
-:1090F000004438253C0880083505008090A30068AE
-:109100000000482124080001000028212404000157
-:109110003C0680008CCD017805A0FFFE34CF0140D5
-:10912000ADE800083C0208008C423FFCA5E50004C5
-:10913000A5E40006ADE2000C3C04080090843FF971
-:109140003C03800834790080A1E40012ADE70014EC
-:10915000A5E900189338004C3C0E1000A1F8002D32
-:1091600003E00008ACCE017834A90E008D28001C65
-:109170003C0C08008D8C3FDC952B0016952A0014C2
-:10918000018648213164FFFF0A000E8A3145FFFF46
-:109190003C04800034830A009065003C30A200202B
-:1091A0001040001934870E000000402100003821D3
-:1091B000000020213C0680008CC901780520FFFEBC
-:1091C00034CA014034CF010091EB0009AD480008DA
-:1091D0003C0E08008DCE3FFC240DFF91240C004076
-:1091E0003C081000A5440004A5470006AD4E000C45
-:1091F000A14D0012AD4C0014A5400018A14B002D4C
-:1092000003E00008ACC801788CE8001894E600126E
-:1092100094E4001030C7FFFF0A000EB33084FFFF54
-:109220003C04800034830A009065003C30A200209A
-:109230001040002727BDFFF8240900010000382155
-:10924000240800013C0680008CCA01780540FFFE1E
-:109250003C0280FF34C40100908D00093C0C0800E2
-:10926000918C4039A3AD00038FAB00003185007FA6
-:109270003459FFFF01665025AFAA00009083000A11
-:10928000A3A0000200057E00A3A300018FB8000088
-:1092900034CB0140240C30000319702401CF682521
-:1092A000AD6D000C27BD0008AD6C0014A560001862
-:1092B000AD690008A56700042409FF80A5680006C1
-:1092C0003C081000A169001203E00008ACC8017856
-:1092D00034870E008CE9001894E6001294E4001024
-:1092E00030C8FFFF0A000ED73087FFFF27BDFFE021
-:1092F000AFB100143C118000AFB00010AFBF001838
-:1093000036380A00970F0032363001000E000B8904
-:1093100031E43FFF8E0E0000240DFF803C0420004E
-:1093200001C25821016D6024000C4940316A007F60
-:10933000012A4025010438253C048008AE27083066
-:109340003486008090C500682403000230A200FF2C
-:10935000104300048F9F00208F990024AC9F006869
-:10936000AC9900648FBF00188FB100148FB000104B
-:1093700003E0000827BD00203C0A0800254A3AA85F
-:109380003C09080025293B383C08080025082F44E3
-:109390003C07080024E73C043C06080024C6392C9E
-:1093A0003C05080024A536803C040800248432844F
-:1093B0003C030800246339E03C0208002442377C67
-:1093C0003C010800AC2A3FB83C010800AC293FB47E
-:1093D0003C010800AC283FB03C010800AC273FBC72
-:1093E0003C010800AC263FCC3C010800AC253FC442
-:1093F0003C010800AC243FC03C010800AC233FD036
-:109400003C010800AC223FC803E000080000000057
-:109410008000094080000900800801008008008069
-:1094200080080000800E0000800800808008000096
-:1094300080000A8080000A00800009808000090006
+:10000000AF8B002000CA2024AF85000010800008BC
+:10001000AF860004240C87FF00CC5824156000082C
+:100020003C0D006000AD302410C000050000000051
+:100030000E000D42000000000A00137100000000D5
+:100040000E001636000000000A00137100000000C8
+:1000500030B980005320FF1DAF8500003C02002016
+:1000600000A2F82453E0FF19AF8500003C07FFFF12
+:1000700034E47FFF00A438240A00132B34C8800026
+:100080000A0013340109102400EC58245160005A6E
+:10009000AF8000288F8D00303C0E0F0000EE18243A
+:1000A00015A00075AF83001030EF010011E0007360
+:1000B000939800103C120200107200703C06800001
+:1000C00034D90100932800139789002E36A6000228
+:1000D000311800FF27160004001619C03C048000E8
+:1000E0008C8501B804A0FFFE34880180AD030000B8
+:1000F0003C158008AC83002096BF004833E5FFFF25
+:1001000010A001EBAF8500082523001200A3102BDF
+:10011000504001E88F850004348D010095AC00202B
+:10012000240B001A30E44000318AFFFFA10B000BC2
+:10013000108001E92543FFFE00A3702B15C001E7E5
+:100140008F9600048F8F0004A503001435E500018D
+:10015000AF8500043C08800035150180A6A9000E7B
+:10016000A6A9001A8F89000C30BF8000A6A7001036
+:10017000AEA90028A6A6000813E0000F3C0F8000DF
+:10018000350C0100958B0016316AFFFC25440004F4
+:10019000008818218C6240003046FFFF14C0000721
+:1001A0002416BFFF3C0EFFFF35CD7FFF00AD282496
+:1001B000AF8500043C0F80002416BFFF00B69024DA
+:1001C00035E50180A4B20026ACA7002C3C07100046
+:1001D000ADE701B80A001370000018210E00168E5A
+:1001E000000000003C0B40003C068000ACCB0178D6
+:1001F0000A001304000000008F85002810A00025CD
+:10020000AF80001090A3000010600072241F000354
+:10021000107F00FF0000302190AD0001240C00028F
+:1002200011AC015930EE004090BF000124190001CB
+:1002300013F9000930E900408CA600049785002ED0
+:1002400000C020210E000FDB36A600020000402176
+:100250000A001370010018215120FFF88CA6000439
+:100260003C07080190E796E110E0FFF42408000144
+:100270000A00137001001821939800100018C8C0DC
+:10028000033E4021AF8800288F85002814A0FFDDA1
+:10029000AF9800103C0480008C86400030C50100FF
+:1002A00010A0008732AA00043C0B08008D6B0024CC
+:1002B00024160004154000033172000D24160002BC
+:1002C0003C0480008C8D4000340CFFFF11AC012CED
+:1002D00032B5FFFB8C8F400031EE010055C00001AC
+:1002E0002415001030F8080013000038241FFFFB0D
+:1002F0008F99002C2F2803EF51000001025F9024FA
+:1003000030E9010011200014325900018F870030BC
+:1003100014E001278F8B000C3C0480003486010020
+:1003200090C5001330A300FF24620004000221C026
+:100330002408FFFE024890241240000202B6302535
+:1003400032A6FFFF0E000FDB9785002E1240FEA3A2
+:1003500000001821325900011320000D324700041B
+:10036000241F0001125F000202B6302532A6FFFFF3
+:100370009785002E0E000FDB000020212409FFFED0
+:10038000024990241240FE950000182132470004D3
+:1003900050E0FE922403000102B63025241600042A
+:1003A0005656000132A6FFFF9785002E0E000FDB88
+:1003B000240401002402FFFB0242A82412A0FE87AD
+:1003C000000018210A001370240300010A0014B968
+:1003D000025F902410A0FFAF30E5010010A00017CD
+:1003E0008F8600102402000210C200148F84000CBB
+:1003F0003C0608008CC6003824C3FFFF14C000026E
+:1004000000831024000010213C0D080025AD0038A9
+:10041000004D6021918B00048F85002C256A00041B
+:10042000000A21C030A5FFFF36A600020E000FDB38
+:10043000000000000A00137000001821240E0002C2
+:1004400010CE0088241200013C0308008C6300D009
+:100450001072008D8F85002C24C8FFFC2D1800041D
+:100460001700006300002021241900021079005DAC
+:100470002CDF000C24C2FFF82C4900041520FFE9F2
+:100480000000202130E3020050600004000621C07B
+:1004900054C0000530A5FFFF000621C030A5FFFFB6
+:1004A0000A00150436A600020E000FDB32A600017A
+:1004B0008F8600108F85002C0A001520000621C0B1
+:1004C0003C0308008C630024307200015240FE435C
+:1004D000000018219785002E36A600020E000FDBC3
+:1004E000000020210A001370000018219668000CFB
+:1004F000311802005700FE313C0500013C1F800806
+:1005000097F900489789002E36A600023328FFFF8E
+:10051000AF8800083C0380008C7501B806A0FFFE80
+:100520003C04800034820180AC400000110000E7F0
+:1005300024180003252A0012010A182B106000E37A
+:1005400000000000966F00203C0E8000240D001A71
+:1005500031ECFFFF35CA018030EB4000A14D000BAC
+:10056000116000E12583FFFE0103902B164000DFA0
+:100570002416FFFE34A50001A5430014AF85000436
+:100580002419BFFF00B94024A6E9000EA6E9001A0D
+:10059000A6E60008A6E80026A6E700103C07100023
+:1005A000AE8701B80A001370000018213C048000D7
+:1005B0008C8901B80520FFFE349601802415001CAB
+:1005C000AEC70000A2D5000B3C071000AC8701B8F5
+:1005D0003C0B40003C068000ACCB01780A001304C1
+:1005E0000000000013E0FFA424C2FFF80000202157
+:1005F00030A5FFFF0A00150436A600020E00103DCC
+:10060000000000008F8700000A001346AF82000C34
+:1006100090A30001241500011075FF0D24080001AE
+:10062000240900021069000430E60040240800019B
+:100630000A0013700100182150C0FFFD24080001BA
+:100640003C0B8000356A01009543001094A4000221
+:100650003062FFFF5082FDE1010018210A0015857C
+:10066000240800018F85002C2CAF03EF11E0FDDB87
+:10067000240300013C0308008C6300D02412000115
+:100680001472FF7624C8FFFC2CD6000C12C0FF7237
+:10069000000621C030A5FFFF0A00150436A600029F
+:1006A00010AF005700043A022406000B14A6FE24E3
+:1006B000000A41C0316600FF0006FE00001F5E0315
+:1006C0000562007230C6007F000668C001BE382196
+:1006D000A0E00001A0E000003C1660008ED21820CF
+:1006E000240C000100CC100400021827000A41C0AD
+:1006F0000243A824A4E0000201003821AED518204E
+:100700000A0013CB3C06800014C000368F8D0020F9
+:10071000000A41C03C1F80003C058008AFE8002073
+:1007200094B9004013200002240500012405004173
+:100730003C0480008C8701B804E0FFFE3495018002
+:1007400024020003AEA80000A2A2000BA6A0000E87
+:10075000A6A0001AA6A00010AEA00028A6A500081A
+:1007600096A3002634720001A6B20026AEA0002C8B
+:100770003C161000AC9601B80A0013CA01003821DB
+:100780000A0014B22415002011C0FEB53C088000F8
+:10079000351801009716001094B2000232CF0FFFF7
+:1007A000164FFEAF000000000A00148490BF000145
+:1007B0003C0A08008D4A0038254CFFFF1540000216
+:1007C000016C1024000010213C1808002718003884
+:1007D0000058782191EE000425CD00040A0014C5CC
+:1007E000000D21C0000A41C025ACFFFF1580FDD4DB
+:1007F000AF8C0020010038210A0013CAAF8000240A
+:10080000240300FF10E3FDCE000A41C010C0001712
+:1008100000078600000720C0009E18212402000166
+:100820003C05080124A596E4009E7821000A41C0F9
+:100830000085C821000B8C02A0620000AF280000D8
+:10084000A1F100013C0E60008DC6182024180001A3
+:1008500000F8500400CA202501003821A5EB000251
+:10086000ADC418200A0013CB3C06800000104603DC
+:100870000502000D30E7007F11430006000720C08D
+:10088000009E18210A001601240200020A0015AB7E
+:10089000AF800020009E18210A00160124020003E8
+:1008A0000A0012FFAF8400300A001617AF8700203D
+:1008B0008F8500043C19800024080003373801802C
+:1008C000A308000B0A00144F3C088000A2F8000B9C
+:1008D0000A00155A2419BFFF8F9600042412FFFE48
+:1008E0000A00144D02D228242416FFFE0A001558CF
+:1008F00000B628243C038000346401008C8500008D
+:1009000030A2003E1440000800000000AC60004827
+:100910008C87000030E607C010C000050000000012
+:10092000AC60004CAC60005003E000082402000101
+:10093000AC600054AC6000408C880000310438008A
+:100940001080FFF9000000002402000103E000080D
+:10095000AC6000443C0380008C6201B80440FFFEA0
+:1009600034670180ACE4000024080001ACE000041E
+:10097000A4E5000824050002A0E8000A3464014050
+:10098000A0E5000B9483000A14C00008A4E3001043
+:10099000ACE000243C07800034E901803C041000F6
+:1009A000AD20002803E00008ACE401B88C86000408
+:1009B0003C041000ACE600243C07800034E90180D0
+:1009C000AD20002803E00008ACE401B83C0680003C
+:1009D0008CC201B80440FFFE34C701802409000224
+:1009E000ACE40000ACE40004A4E50008A0E9000ABF
+:1009F00034C50140A0E9000B94A8000A3C04100093
+:100A0000A4E80010ACE000248CA30004ACE30028B0
+:100A100003E00008ACC401B83C039000346200015C
+:100A2000008220253C038000AC6400208C650020FF
+:100A300004A0FFFE0000000003E00008000000002A
+:100A40003C028000344300010083202503E00008BD
+:100A5000AC44002027BDFFE03C098000AFBF001878
+:100A6000AFB10014AFB00010352801408D10000068
+:100A7000910400099107000891050008308400FFE7
+:100A800030E600FF00061A002C820081008330252A
+:100A90001040002A30A50080000460803C0D080151
+:100AA00025AD9350018D58218D6A0000014000084A
+:100AB000000000003C038000346201409445000ABD
+:100AC00014A0001E8F91FCC09227000530E60004A0
+:100AD00014C0001A000000000E00167F0200202142
+:100AE000922A000502002021354900040E001689D3
+:100AF000A229000592280005310400041480000298
+:100B0000000000000000000D922D0000240B0020CA
+:100B100031AC00FF158B00093C0580008CAE01B89C
+:100B200005C0FFFE34B10180AE3000003C0F100064
+:100B300024100005A230000BACAF01B80000000D7E
+:100B40008FBF00188FB100148FB0001003E00008B1
+:100B500027BD00200200202100C028218FBF0018DF
+:100B60008FB100148FB00010240600010A00164E49
+:100B700027BD00200000000D0200202100C0282118
+:100B80008FBF00188FB100148FB00010000030210B
+:100B90000A00164E27BD002014A0FFE80000000048
+:100BA000020020218FBF00188FB100148FB00010F9
+:100BB00000C028210A00166C27BD00203C078000D9
+:100BC0008CEE01B805C0FFFE34F00180241F000246
+:100BD000A21F000B34F80140A60600089719000A6E
+:100BE0003C0F1000A61900108F110004A61100126E
+:100BF000ACEF01B80A0016CA8FBF001827BDFFE886
+:100C0000AFBF00100E000FD4000000003C028000B7
+:100C10008FBF001000002021AC4001800A00108F1F
+:100C200027BD00183084FFFF30A5FFFF10800007AC
+:100C30000000182130820001104000020004204210
+:100C4000006518211480FFFB0005284003E0000820
+:100C50000060102110C00007000000008CA20000FE
+:100C600024C6FFFF24A50004AC82000014C0FFFBD3
+:100C70002484000403E000080000000010A0000825
+:100C800024A3FFFFAC86000000000000000000006D
+:100C90002402FFFF2463FFFF1462FFFA2484000490
+:100CA00003E00008000000003C03800027BDFFF8BF
+:100CB00034620180AFA20000308C00FF30AD00FF35
+:100CC00030CE00FF3C0B80008D6401B80480FFFE35
+:100CD000000000008FA900008D6801288FAA000085
+:100CE0008FA700008FA40000240500012402000249
+:100CF000A085000A8FA30000359940003C05100034
+:100D0000A062000B8FB800008FAC00008FA600001F
+:100D10008FAF000027BD0008AD280000AD400004E3
+:100D2000AD800024ACC00028A4F90008A70D001075
+:100D3000A5EE001203E00008AD6501B83C0680088E
+:100D400027BDFFE834C50080AFBF001090A70009A1
+:100D50002402001230E300FF1062000B00803021FB
+:100D60008CA8005000882023048000088FBF00104A
+:100D70008CAA0034240400390000282100CA48232A
+:100D800005200005240600128FBF00102402000178
+:100D900003E0000827BD00180E0017230000000024
+:100DA0008FBF00102402000103E0000827BD0018D7
+:100DB00027BDFFC8AFB20030AFB00028AFBF0034CE
+:100DC000AFB1002C00A0802190A5000D30A600102E
+:100DD00010C00010008090213C0280088C44000468
+:100DE0008E0300081064000C30A7000530A6000533
+:100DF00010C00093240400018FBF00348FB2003074
+:100E00008FB1002C8FB000280080102103E0000873
+:100E100027BD003830A7000510E0000F30AB0012EE
+:100E200010C00006240400013C0980088E08000858
+:100E30008D2500045105009C240400388FBF003428
+:100E40008FB200308FB1002C8FB0002800801021AD
+:100E500003E0000827BD0038240A0012156AFFE6E7
+:100E6000240400010200202127A500100E000CB66A
+:100E7000AFA000101440007C3C198008372400808B
+:100E800090980008331100081220000A8FA7001064
+:100E900030FF010013E000A48FA300148C860058DB
+:100EA00000661023044000043C0A8008AC8300580C
+:100EB0008FA700103C0A800835480080910900087F
+:100EC000312400081480000224080003000040219F
+:100ED0003C1F800893F1001193F9001237E600805F
+:100EE0008CCC0054333800FF03087821322D00FFEA
+:100EF000000F708001AE282100AC582B1160006FEC
+:100F00000000000094CA005C8CC900543144FFFF0B
+:100F1000012510230082182B1460006800000000D7
+:100F20008CCB00540165182330EC00041180006C58
+:100F3000000830808FA8001C0068102B1040006251
+:100F400030ED0004006610232C46008010C0000223
+:100F500000408821241100800E00167F02402021CD
+:100F60003C0D800835A6008024070001ACC7000CAA
+:100F700090C800080011484035A70100310C007FDF
+:100F8000A0CC00088E05000424AB0001ACCB0030DF
+:100F9000A4D1005C8CCA003C9602000E01422021C4
+:100FA000ACC400208CC3003C0069F821ACDF001CFD
+:100FB0008E190004ACF900008E180008ACF800048B
+:100FC0008FB10010322F000855E0004793A6002093
+:100FD000A0C0004E90D8004E2411FFDFA0F80008FA
+:100FE00090CF000801F17024A0CE00088E05000803
+:100FF0003C0B800835690080AD2500388D6A0014EF
+:101000008D2200302419005001422021AD240034EB
+:1010100091230000307F00FF13F90036264F0100B6
+:101020000E001689024020212404003800002821E7
+:101030000E0017232406000A0A0017882404000162
+:101040000E000D28000020218FBF00348FB2003029
+:101050008FB1002C8FB0002800402021008010218B
+:1010600003E0000827BD00388E0E00083C0F800802
+:1010700035F00080AE0E005402402021AE0000305A
+:101080000E00167F00000000920D00250240202176
+:1010900035AC00200E001689A20C00250E000CAC09
+:1010A00002402021240400382405008D0E0017235F
+:1010B000240600120A0017882404000194C5005C6D
+:1010C0000A0017C330A3FFFF2407021811A0FF9ED8
+:1010D00000E610238FAE001C0A0017CB01C61023B8
+:1010E0000A0017C82C620218A0E600080A0017F5CB
+:1010F0008E0500082406FF8001E6C0243C11800014
+:10110000AE3800288E0D000831E7007F3C0E800CC1
+:1011100000EE6021AD8D00E08E080008AF8C003C31
+:101120000A001801AD8800E4AC80005890850008E2
+:101130002403FFF700A33824A08700080A0017A69D
+:101140008FA700103C05080024A5616C3C04080032
+:10115000248470B83C020800244261742403000611
+:101160003C010801AC2597603C010801AC24976460
+:101170003C010801AC2297683C010801A023976C50
+:1011800003E000080000000003E000082402000162
+:101190003C028000308800FF344701803C0680001C
+:1011A0008CC301B80460FFFE000000008CC501285C
+:1011B0002418FF803C0D800A24AF010001F8702440
+:1011C00031EC007FACCE0024018D2021ACE5000085
+:1011D000948B00EA3509600024080002316AFFFFA1
+:1011E000ACEA000424020001A4E90008A0E8000B16
+:1011F000ACE000243C071000ACC701B8AF84003C51
+:1012000003E00008AF8500709388004C8F8900646C
+:101210008F82003C30C600FF0109382330E900FF0F
+:101220000122182130A500FF2468008810C00002A8
+:10123000012438210080382130E4000314800003A9
+:1012400030AA00031140000D312B000310A000094B
+:101250000000102190ED0000244E000131C200FF7B
+:101260000045602BA10D000024E700011580FFF967
+:101270002508000103E00008000000001560FFF3EE
+:101280000000000010A0FFFB000010218CF80000FF
+:1012900024590004332200FF0045782BAD180000CC
+:1012A00024E7000415E0FFF92508000403E0000826
+:1012B000000000009385004C9388005C8F870064D9
+:1012C000000432003103007F00E5102B30C47F00A2
+:1012D0001040000F006428258F84003C3C098000EA
+:1012E0008C8A00ECAD2A00A43C03800000A35825A2
+:1012F000AC6B00A08C6C00A00580FFFE000000001D
+:101300008C6D00ACAC8D00EC03E000088C6200A892
+:101310000A0018B38F84003C9388005D3C02800073
+:1013200000805021310300FEA383005D30ABFFFF3E
+:1013300030CC00FF30E7FFFF344801803C098000DB
+:101340008D2401B80480FFFE8F8D007024180016D4
+:10135000AD0D00008D2201248F8D003CAD020004F4
+:101360008D590020A5070008240201C4A119000A14
+:10137000A118000B952F01208D4E00088D47000409
+:10138000978300608D59002401CF302100C72821A8
+:1013900000A320232418FFFFA504000CA50B000EBA
+:1013A000A5020010A50C0012AD190018AD180024FC
+:1013B00095AF00E83C0B10002407FFF731EEFFFF6C
+:1013C000AD0E00288DAC0084AD0C002CAD2B01B807
+:1013D0008D46002000C7282403E00008AD4500200A
+:1013E0008F88003C0080582130E7FFFF910900D62C
+:1013F0003C02800030A5FFFF312400FF00041A00EA
+:101400000067502530C600FF344701803C0980004A
+:101410008D2C01B80580FFFE8F820070240F00170D
+:10142000ACE200008D390124ACF900048D78002075
+:10143000A4EA0008241901C4A0F8000AA0EF000BD8
+:10144000952301208D6E00088D6D00049784006047
+:1014500001C35021014D602101841023A4E2000C3E
+:10146000A4E5000EA4F90010A4E60012ACE00014FC
+:101470008D780024240DFFFFACF800188D0F007C40
+:10148000ACEF001C8D0E00783C0F1000ACEE00207D
+:10149000ACED0024950A00BE240DFFF73146FFFF96
+:1014A000ACE60028950C00809504008231837FFF14
+:1014B0000003CA003082FFFF0322C021ACF8002CD9
+:1014C000AD2F01B8950E00828D6A002000AE30214C
+:1014D000014D2824A506008203E00008AD65002028
+:1014E0003C028000344501803C0480008C8301B8BC
+:1014F0000460FFFE8F8A0048240600199549001CED
+:101500003128FFFF000839C0ACA70000A0A6000BDF
+:101510003C05100003E00008AC8501B88F8700503F
+:101520000080402130C400FF3C0680008CC201B81E
+:101530000440FFFE8F8900709383006C3499600033
+:10154000ACA90000A0A300058CE20010240F00024B
+:101550002403FFF7A4A20006A4B900088D180020F8
+:10156000A0B8000AA0AF000B8CEE0000ACAE0010DB
+:101570008CED0004ACAD00148CEC001CACAC002471
+:101580008CEB0020ACAB00288CEA002C3C07100050
+:10159000ACAA002C8D090024ACA90018ACC701B876
+:1015A0008D05002000A3202403E00008AD040020E6
+:1015B0008F86003C27BDFFE0AFB10014AFBF00181D
+:1015C000AFB0001090C300D430A500FF30620020FF
+:1015D00010400008008088218CCB00D02409FFDF58
+:1015E000256A0001ACCA00D090C800D40109382493
+:1015F000A0C700D414A000403C0C80008F84003CA5
+:10160000908700D42418FFBF2406FFEF30E3007F4B
+:10161000A08300D4979F00608F8200648F8D003C70
+:1016200003E2C823A7990060A5A000BC91AF00D435
+:1016300001F87024A1AE00D48F8C003CA18000D7AB
+:101640008F8A003CA5400082AD4000EC914500D45B
+:1016500000A65824A14B00D48F9000388F840064DA
+:10166000978600600204282110C0000FAF85003863
+:10167000A380005C3C0780008E2C000894ED0120C4
+:101680008E2B0004018D5021014B80210206202366
+:101690003086FFFF30C8000F3909000131310001E9
+:1016A00016200009A388005C9386004C8FBF0018A9
+:1016B0008FB100148FB0001027BD0020AF850068E7
+:1016C00003E00008AF86006400C870238FBF0018D5
+:1016D0009386004C8FB100148FB0001034EF0C00D3
+:1016E000010F282127BD0020ACEE0084AF850068E3
+:1016F00003E00008AF8600643590018002002821D5
+:101700000E001940240600828F84003C908600D48D
+:1017100030C5004050A0FFBAA380006C8F850050F8
+:101720003C0680008CCD01B805A0FFFE8F890070BB
+:101730002408608224070002AE090000A608000801
+:10174000A207000B8CA300083C0E1000AE03001093
+:101750008CA2000CAE0200148CBF0014AE1F001847
+:101760008CB90018AE1900248CB80024AE180028DB
+:101770008CAF0028AE0F002CACCE01B80A0019794E
+:10178000A380006C8F8A003C27BDFFE0AFB100143E
+:10179000AFB000108F880064AFBF0018938900407D
+:1017A000954200BC30D100FF0109182B0080802138
+:1017B00030AC00FF3047FFFF0000582114600003E9
+:1017C000310600FF01203021010958239783006072
+:1017D0000068202B148000270000000010680056CD
+:1017E000241900011199006334E708803165FFFF77
+:1017F0000E0018F1020020218F8300703C0780004A
+:1018000034E601803C0580008CAB01B80560FFFE2A
+:10181000240A00188F84003CACC30000A0CA000B4F
+:10182000948900BE3C081000A4C90010ACC0003070
+:10183000ACA801B89482008024430001A4830080F6
+:10184000949F00803C0608008CC6318833EC7FFFF3
+:101850001186005E000000000200202102202821E5
+:101860008FBF00188FB100148FB000100A001965E7
+:1018700027BD0020914400D42403FF8000838825E5
+:10188000A15100D4978400603088FFFF51000023ED
+:10189000938C00408F85003C2402EFFF008B78235F
+:1018A00094AE00BC0168502B31E900FF01C26824EE
+:1018B000A4AD00BC51400039010058213C1F8000FC
+:1018C00037E601008CD800043C19000103194024BC
+:1018D0005500000134E740008E0A00202403FFFB7E
+:1018E0002411000101432024AE0400201191002D99
+:1018F00034E7800002002021012030210E0018F181
+:101900003165FFFF978700608F890064A7800060C2
+:1019100001278023AF900064938C00408F8B003CA4
+:101920008FBF00188FB100148FB0001027BD0020AA
+:1019300003E00008A16C00D73C0D800035AA01002F
+:101940008D4800043C0900010109282454A000012D
+:1019500034E740008E0F00202418FFFB34E780009E
+:1019600001F8702424190001AE0E00201599FF9F84
+:1019700034E70880020020210E0018BF3165FFFF08
+:1019800002002021022028218FBF00188FB10014EF
+:101990008FB000100A00196527BD00200A001A2820
+:1019A0000000482102002021012030210E0018BF34
+:1019B0003165FFFF978700608F890064A780006012
+:1019C000012780230A001A3FAF900064948C0080A6
+:1019D000241F8000019F3024A4860080908B00800B
+:1019E000908F0080316700FF0007C9C20019C0272F
+:1019F000001871C031ED007F01AE2825A085008060
+:101A00000A001A10020020219385006C24030001B3
+:101A100027BDFFE800A330042CA20020AFB00010C7
+:101A2000AFBF001400C01821104000132410FFFEA7
+:101A30003C0708008CE7319000E610243C08800049
+:101A40003505018014400005240600848F89003C80
+:101A5000240A00042410FFFFA12A00FC0E001940F4
+:101A600000000000020010218FBF00148FB0001092
+:101A700003E0000827BD00183C0608008CC631941E
+:101A80000A001A8800C310248F87004827BDFFE092
+:101A9000AFB20018AFB10014AFB00010AFBF001C60
+:101AA00030D000FF90E6000D00A08821008090213A
+:101AB00030C5007FA0E5000D8F85003C8E23001807
+:101AC0008CA200D01062002E240A000E0E001A7B99
+:101AD000A38A006C2409FFFF104900222404FFFFA1
+:101AE00052000020000020218E2600003C0C001037
+:101AF00000CC5824156000393C0E000800CE682444
+:101B000055A0003F024020213C18000200D880244C
+:101B10001200001F3C0A00048F8700488CE200146A
+:101B20008CE300108CE500140043F82303E5C82B78
+:101B300013200005024020218E24002C8CF100107F
+:101B4000109100310240202124020012A382006C77
+:101B50000E001A7B2412FFFF105200022404FFFF24
+:101B6000000020218FBF001C8FB200188FB100141D
+:101B70008FB000100080102103E0000827BD002076
+:101B800090A800D4350400200A001AB1A0A400D403
+:101B900000CA48241520000B8F8B00488F8D004809
+:101BA0008DAC00101580000B024020218E2E002CE1
+:101BB00051C0FFEC00002021024020210A001ACC75
+:101BC000240200178D66001050C0FFE6000020219F
+:101BD000024020210A001ACC2402001102402021D8
+:101BE000240200150E001A7BA382006C240FFFFF55
+:101BF000104FFFDC2404FFFF0A001ABB8E260000F2
+:101C00000A001AF2240200143C08000400C8382418
+:101C100050E0FFD400002021024020210A001ACC0D
+:101C2000240200138F85003C27BDFFD8AFB3001CF2
+:101C3000AFB20018AFB10014AFB00010AFBF0020BA
+:101C400090A700D48F9000502412FFFF34E2004090
+:101C500092060000A0A200D48E03001000809821FC
+:101C60001072000630D1003F2408000D0E001A7BD0
+:101C7000A388006C105200252404FFFF8F8A003CCB
+:101C80008E0900188D4400D0112400070260202125
+:101C9000240C000E0E001A7BA38C006C240BFFFF9B
+:101CA000104B001A2404FFFF240400201224000417
+:101CB0008F8D003C91AF00D435EE0020A1AE00D452
+:101CC0008F85005810A00019000000001224004A5F
+:101CD0008F98003C8F92FCC0971000809651000AAC
+:101CE000523000488F9300443C1F08008FFF318C16
+:101CF00003E5C82B1720001E0260202100002821C8
+:101D00000E0019DA24060001000020218FBF0020F8
+:101D10008FB3001C8FB200188FB100148FB0001069
+:101D20000080102103E0000827BD00285224002A6B
+:101D30008E0500148F84003C948A008025490001A0
+:101D4000A4890080948800803C0208008C4231887D
+:101D500031077FFF10E2000E00000000026020212A
+:101D60000E001965240500010A001B3C000020211B
+:101D70002402002D0E001A7BA382006C2403FFFFB7
+:101D80001443FFE12404FFFF0A001B3D8FBF002026
+:101D900094990080241F800024050001033FC02483
+:101DA000A498008090920080908E0080325100FFB5
+:101DB000001181C200107827000F69C031CC007F6C
+:101DC000018D5825A08B00800E001965026020212E
+:101DD0000A001B3C000020212406FFFF54A6FFD66A
+:101DE0008F84003C026020210E001965240500014B
+:101DF0000A001B3C00002021026020210A001B5623
+:101E00002402000A2404FFFD0A001B3CAF93006477
+:101E10008F88003C27BDFFE8AFB00010AFBF0014B3
+:101E2000910A00D48F8700500080802135490040FE
+:101E30008CE60010A10900D43C0208008C4231B0AD
+:101E400030C53FFF00A2182B106000078F8500549B
+:101E5000240DFF8090AE000D01AE6024318B00FF99
+:101E6000156000080006C382020020212403000D33
+:101E70008FBF00148FB0001027BD00180A001A7B16
+:101E8000A383006C33060003240F000254CFFFF736
+:101E90000200202194A2001C8F85003C24190023FD
+:101EA000A4A200E88CE8000000081E02307F003F7A
+:101EB00013F900353C0A00838CE800188CA600D08A
+:101EC00011060008000000002405000E0E001A7B19
+:101ED000A385006C2407FFFF104700182404FFFFB0
+:101EE0008F85003C90A900D435240020A0A400D404
+:101EF0008F8C0048918E000D31CD007FA18D000D9B
+:101F00008F8300581060001C020020218F84005431
+:101F10008C9800100303782B11E0000D2419001891
+:101F200002002021A399006C0E001A7B2410FFFFF1
+:101F3000105000022404FFFF000020218FBF001476
+:101F40008FB000100080102103E0000827BD0018AA
+:101F50008C8600108F9F00480200202100C31023B0
+:101F6000AFE20010240500010E0019DA240600017A
+:101F70000A001BC8000020210E001965240500017D
+:101F80000A001BC800002021010A5824156AFFD945
+:101F90008F8C0048A0A600FC0A001BB5A386005E3B
+:101FA00030A500FF2406000124A9000100C9102B60
+:101FB0001040000C00004021240A000100A6182354
+:101FC000308B000124C60001006A3804000420425E
+:101FD0001160000200C9182B010740251460FFF8AA
+:101FE00000A6182303E000080100102127BDFFD838
+:101FF000AFB000188F900050AFB1001CAFBF0020F1
+:102000002403FFFF2411002FAFA30010920600004D
+:102010002405000826100001006620260E001BE1A2
+:10202000308400FF00021E003C021EDC34466F417B
+:102030000A001C090000102110A0000900801821CE
+:102040002445000130A2FFFF2C4500080461FFFA7F
+:10205000000320400086202614A0FFF900801821EC
+:102060000E001BE1240500208FA300102629FFFF8E
+:10207000313100FF00034202240700FF1627FFE270
+:102080000102182600035027AFAA0014AFAA0010BF
+:102090000000302127A8001027A7001400E67823AD
+:1020A00091ED000324CE000100C8602131C600FF7D
+:1020B0002CCB00041560FFF9A18D00008FA2001049
+:1020C0008FBF00208FB1001C8FB0001803E0000804
+:1020D00027BD002827BDFFD0AFB3001CAFB0001054
+:1020E000AFBF0028AFB50024AFB40020AFB20018D6
+:1020F000AFB100143C0C80008D880128240FFF80B4
+:102100003C06800A25100100250B0080020F682480
+:102110003205007F016F7024AD8E009000A628214B
+:10212000AD8D002490A600FC3169007F3C0A80043C
+:10213000012A1821A386005E9067007C0080982108
+:10214000AF83003430E20002AF880070AF85003CFE
+:1021500000A018211440000224040034240400309C
+:10216000A384004C8C7200DC30D100FF24040004F6
+:10217000AF92006412240004A380006C8E740004EB
+:102180001680001E3C0880009386005D30C7000169
+:1021900050E0000F8F8600648CA400848CA800841B
+:1021A0002413FF8000936024000C49403110007F0D
+:1021B000013078253C19200001F9682530DF00FE48
+:1021C0003C038000AC6D0830A39F005D8F860064E7
+:1021D0008FBF00288FB500248FB400208FB3001C60
+:1021E0008FB200188FB100148FB0001024020001CC
+:1021F00027BD003003E00008ACA600DC8E7F00089D
+:10220000950201208E67001003E2C8213326FFFFEC
+:1022100030D8000F33150001AF87003816A00058E2
+:10222000A398005C35090C000309382100D8182355
+:10223000AD030084AF8700688E6A00043148FFFF59
+:102240001100007EA78A006090AC00D42407FF80B4
+:1022500000EC302430CB00FF1560004B9786006007
+:10226000938E005E240D000230D5FFFF11CD02A237
+:102270000000A0218F85006402A5802B160000BC01
+:102280009388004C3C11800096240120310400FF0B
+:10229000148500888F8400688F98003833120003FB
+:1022A0005640008530A500FF8F900068310C00FF7C
+:1022B0002406003411860095AF900050920400046B
+:1022C000148001198F8E003CA38000408E0D000405
+:1022D0008DC800D83C0600FF34CCFFFF01AC302491
+:1022E0000106182B14600121AF8600588F87006407
+:1022F00097980060AF8700440307402310C000C7D1
+:10230000A78800608F91003430C300030003582376
+:10231000922A007C3171000302261021000A2082DB
+:10232000309200010012488000492821311FFFFF30
+:1023300003E5C82B132001208F88003C8F850038CF
+:102340008F8800681105025A3C0E3F018E0600007E
+:102350003C0C250000CE682411AC01638F84005032
+:1023600030E500FF0E00187B000030218F88003C14
+:102370008F8700648F8500380A001DE88F8600581B
+:102380000A001C87AF87006890AC00D400EC2024C2
+:10239000309000FF120000169386005D90B5008813
+:1023A00090B400D724A8008832A2003F2446FFE062
+:1023B0002CD10020A39400401220000CAF880050C4
+:1023C000240E000100CE2004308A00191540012B94
+:1023D0003C06800034D80002009858241560022E74
+:1023E0003092002016400234000000009386005D09
+:1023F00030CE000111C0000F978800608CA90084C6
+:102400008CAF00842410FF800130C82400191940CB
+:1024100031ED007F006D38253C1F200000FF902526
+:1024200030CB00FE3C188000AF120830A38B005D5B
+:10243000978800601500FF84000000008E63002074
+:10244000306C00041180FF519386005D2404FFFB73
+:10245000006430243C038000AE66002034660180B6
+:102460008C7301B80660FFFE8F8E0070346A010025
+:102470003C150001ACCE00008C620124240760856D
+:10248000ACC200048D54000402958824522000013F
+:1024900024076083241200023C1810003C0B8000CB
+:1024A000A4C70008A0D2000BAD7801B80A001C5CDC
+:1024B0009386005D30A500FF0E00187B2406000106
+:1024C0008F8800703C05800034A90900250201882E
+:1024D0009388004C304A0007304B00783C03408022
+:1024E0002407FF800163C825014980210047F824A3
+:1024F000310C00FF24060034ACBF0800AF90005040
+:10250000ACB908105586FF6E920400048F84003C1D
+:102510008E110030908E00D431CD001015A0001027
+:102520008F8300642C6F000515E000E400000000BC
+:10253000909800D42465FFFC331200101640000868
+:1025400030A400FF8F9F00688F99003813F90004B2
+:102550003887000130E20001144001C8000000008B
+:102560000E001BF4000000000A001E2900000000FD
+:102570008F84006830C500FF0E00187B2406000120
+:10258000938E004C240A003411CA00A08F85003CB1
+:102590008F860064978300603062FFFF00C288234B
+:1025A000AF910064A78000601280FF900280182124
+:1025B0002414FFFD5474FFA28E6300208E69000472
+:1025C0002403FFBF240BFFEF0135C823AE790004BD
+:1025D00090AF00D431ED007FA0AD00D48E66002016
+:1025E0008F98003CA780006034DF0002AE7F00209F
+:1025F000A70000BC931200D402434024A30800D4D7
+:102600008F95003CAEA000EC92AE00D401CB5024DC
+:10261000A2AA00D40A001D088F85003C8F910038C3
+:10262000AF80006402275821AF8B003800002021C2
+:102630002403FFFF108301B48F85003C8E0C001033
+:102640003C0D08008DAD31B09208000031843FFF91
+:10265000008D802B12000023310D003F3C19080033
+:102660008F3931A88F9F0070000479802408FF8083
+:10267000033F2021008FC8219385005D0328F824A3
+:102680003C0600803C0F800034D80001001F9140C0
+:102690003331007F8F86003C0251502535EE0940D2
+:1026A000332B0078333000073C0310003C02800CD1
+:1026B00001789025020E48210143C02502223821CD
+:1026C00034AE0001ADFF0804AF890054ADF2081428
+:1026D000AF870048ADFF0028ACD90084ADF80830C2
+:1026E000A38E005D9383005E2407000350670028DB
+:1026F00025A3FFE0240C0001146CFFAB8F85003C88
+:102700002411002311B10084000000002402000BFA
+:10271000026020210E001A7BA382006C0040A021E1
+:102720000A001D638F85003C02602021240B000CF1
+:102730000E001A7BA38B006C240AFFFF104AFFBC1B
+:102740002404FFFF8F8E003CA38000408E0D000408
+:102750008DC800D83C0600FF34CCFFFF01AC30240C
+:102760000106182B1060FEE1AF86005802602021A0
+:10277000241200190E001A7BA392006C240FFFFF95
+:10278000104FFFAB2404FFFF0A001CB48F860058D3
+:102790002C7400201280FFDE2402000B000328802E
+:1027A0003C1108012631955400B148218D2D0000BF
+:1027B00001A00008000000008F85003800A710214C
+:1027C00093850040AF82003802251821A383004082
+:1027D000951F00BC0226282137F91000A51900BC5E
+:1027E0005240FF92AF850064246A0004A38A00402F
+:1027F000950900BC24A40004AF8400643532200095
+:10280000A51200BC0A001D85000020218F860064EF
+:102810002CCB00051560FF60978300603072FFFFCE
+:1028200000D240232D18000513000003306400FF80
+:1028300024DFFFFC33E400FF8F8500688F860038BB
+:1028400010A60004388F000131ED000115A00138F9
+:10285000000000008F84003C908C00D4358700106D
+:10286000A08700D48F85003C8F860064978300602A
+:10287000ACA000EC0A001D603062FFFF8CAA00844F
+:102880008CB500843C0410000147102400028940EC
+:1028900032B4007F0234302500C460253C0880003B
+:1028A0002405000102602021240600010E0019DA2F
+:1028B000AD0C08300A001CF48F85003C8C8200ECC3
+:1028C0001222FE7E0260202124090005A389006CEB
+:1028D0000E001A7B2411FFFF1451FE782404FFFF21
+:1028E0000A001D862403FFFF8F8F00508F88003C55
+:1028F0008DF80000AD1800888DE70010AD07009836
+:102900008F8700640A001DE88F8600582407FFFFA8
+:1029100011870005000000000E001B7D02602021D1
+:102920000A001DC10040A0210E001B0202602021F0
+:102930000A001DC10040A0218F9000503C090800F2
+:102940008D2931B08E11001032323FFF0249682BC1
+:1029500011A0000C240AFF808F85005490AE000D5A
+:10296000014E1024304C00FF11800007026020212E
+:102970000011C38233030003240B0001106B010517
+:1029800000000000026020212418000D0E001A7BB8
+:10299000A398006C004020218F85003C0A001D6335
+:1029A0000080A0218F9000503C0A08008D4A31B071
+:1029B0008F8500548E0400100000A0218CB10014FB
+:1029C00030823FFF004A602B8CB200205180FFEE26
+:1029D0000260202190B8000D240BFF800178702444
+:1029E00031C300FF5060FFE80260202100044382F1
+:1029F0003106000314C0FFE40260202194BF001CD4
+:102A00008F99003C8E060028A73F00E88CAF00108D
+:102A1000022F202314C40139026020218F83005823
+:102A200000C36821022D382B14E001352402001860
+:102A30008F8A00488F820034024390218D4B001012
+:102A400001637023AD4E0010AD5200208C4C007419
+:102A50000192282B14A00156026020218F8400547B
+:102A60008E0800248C8600241106000702602021B5
+:102A70002419001C0E001A7BA399006C240FFFFF81
+:102A8000104FFFC52404FFFF8F8400488C8700246B
+:102A900024FF0001AC9F0024125101338F8D0034BC
+:102AA0008DB10074123201303C0B00808E0E00009C
+:102AB00001CB502415400075000000008E03001467
+:102AC0002411FFFF10710006026020212418001B52
+:102AD0000E001A7BA398006C1051FFAF2404FFFF77
+:102AE0008E0300003C0800010068302410C0001371
+:102AF0003C0400800064A024168000090200282104
+:102B0000026020212419001A0E001A7BA399006C80
+:102B1000240FFFFF104FFFA02404FFFF0200282115
+:102B2000026020210E001A9B240600012410FFFFE2
+:102B30001050FF992404FFFF241400018F9F0048C8
+:102B4000026020210280302197F100342405000129
+:102B500026270001A7E700340E0019DA0000000064
+:102B6000000020218F85003C0A001D630080A02109
+:102B70008F9000503C1408008E9431B08E070010E6
+:102B800030E83FFF0114302B10C000618F860054E5
+:102B9000241FFF8090C5000D03E52024309200FF24
+:102BA0005240005C026020218F8D005811A0000768
+:102BB00000078B828F85003C8F89FCC094AF00801A
+:102BC0009539000A132F00F68F870044322C00033A
+:102BD000158000630000000092020002104000D740
+:102BE000000000008E0A0024154000D80260202159
+:102BF0009204000324060002308800FF1506000539
+:102C0000308500FF8F940058528000F2026020212E
+:102C1000308500FF38AD00102DA400012CBF00014D
+:102C200003E43025020028210E001A9B02602021B7
+:102C30002410FFFF105000BE8F85003C8F8300588A
+:102C4000106000C4240500013C1908008F39318C44
+:102C50000323782B15E000B12409002D0260202108
+:102C6000000028210E0019DA240600018F85003C9F
+:102C7000000018210A001D630060A0210E0018A6A4
+:102C8000000000000A001E2900000000AC800020A7
+:102C90000A001EA98E0300140000282102602021D2
+:102CA0000E0019DA240600010A001CF48F85003C8E
+:102CB0000A001DE88F88003C8CB000848CB9008429
+:102CC0003C0310000207482400096940332F007FAD
+:102CD00001AFF82503E32825ACC5083091070001B2
+:102CE00024050001026020210E0019DA30E60001FF
+:102CF0000A001CF48F85003C938F004C2403FFFDD9
+:102D00000A001D65AF8F00640A001D652403FFFFE4
+:102D1000026020212410000D0E001A7BA390006C8D
+:102D2000004018218F85003C0A001D630060A0212F
+:102D30000E0018A600000000978300608F860064D4
+:102D40003070FFFF00D048232D3900051320FE12FC
+:102D50008F85003CACA200EC0A001D603062FFFFD2
+:102D600090C3000D307800085700FFA292040003C2
+:102D700002602021240200100E001A7BA382006C46
+:102D80002403FFFF5443FF9B920400030A001F43E8
+:102D90008F85003C90A8000D3106000810C00095FA
+:102DA0008F9400581680009E026020218E0F000C28
+:102DB0008CA4002055E40005026020218E1F00082D
+:102DC0008CB9002413F9003A02602021240200206B
+:102DD0000E001A7BA382006C2405FFFF1045FEEE57
+:102DE0002404FFFF8F8F0048240CFFF72403FF808B
+:102DF00091E9000D3C14800E3C0B8000012CC8248E
+:102E0000A1F9000D8F8F00343C0708008CE731AC2E
+:102E10008F8D007095E500788F99004800ED902126
+:102E200030BF7FFF001F20400244302130C8007FA8
+:102E300000C3C02401147021AD78002CA5D100007E
+:102E40008F2A002825420001AF2200288F29002C5C
+:102E50008E0C002C012C6821AF2D002C8E07002C2D
+:102E6000AF2700308E050014AF250034973F003A9D
+:102E700027E40001A724003A95F200783C100800EE
+:102E80008E1031B02643000130717FFF1230005C9C
+:102E9000006030218F83003402602021240500016E
+:102EA0000E001965A46600780A001ED200002021D9
+:102EB0008E0700142412FFFF10F200638F8C003C79
+:102EC0008E0900188D8D00D0152D005D0260202127
+:102ED0008E0A00248CA200281142005324020021F3
+:102EE0000E001A7BA382006C1452FFBE2404FFFF65
+:102EF0008F85003C0A001D630080A0212402001F72
+:102F00000E001A7BA382006C2409FFFF1049FEA269
+:102F10002404FFFF0A001E858F83005802602021D1
+:102F20000E001A7BA389006C1450FF518F85003C62
+:102F30002403FFFF0A001D630060A0218CCE002443
+:102F40008E0B0024116EFF2A026020210A001F57F9
+:102F50002402000F0E001965026020218F85003CBD
+:102F60000A001F16000018218E0900003C05008091
+:102F7000012590241640FF452402001A02602021FA
+:102F80000E001A7BA382006C240CFFFF144CFECBB6
+:102F90002404FFFF8F85003C0A001D630080A021F0
+:102FA0002403FFFD0060A0210A001D63AF870064B9
+:102FB0002418001D0E001A7BA398006C2403FFFF49
+:102FC0001443FEA62404FFFF8F85003C0A001D6306
+:102FD0000080A0212412002C0E001A7BA392006C0A
+:102FE0002403FFFF1043FF508F85003C0A001EFDA5
+:102FF00092040003026020210A001F6D24020024B5
+:10300000240B8000006B702431CAFFFF000A13C23A
+:10301000305100FF001180270A001F9E001033C0AE
+:103020000A001F6D240200278E0600288CAE002C9B
+:1030300010CE0008026020210A001FB12402001FE8
+:103040000A001FB12402000E026020210A001FB1F5
+:10305000240200258E04002C1080000D8F83003484
+:103060008C7800740304582B5560000C02602021FA
+:103070008CA800140086A0210114302B10C0FF5A28
+:103080008F8F0048026020210A001FB12402002215
+:10309000026020210A001FB1240200230A001FB190
+:1030A0002402002627BDFFD8AFB3001CAFB1001427
+:1030B000AFBF0020AFB20018AFB000103C028000DC
+:1030C0008C5201408C4B01483C048000000B8C0268
+:1030D000322300FF317300FF8C8501B804A0FFFE8E
+:1030E00034900180AE1200008C8701442464FFF00C
+:1030F000240600022C830013AE070004A61100086A
+:10310000A206000BAE1300241060004F8FBF0020FA
+:10311000000448803C0A0801254A95D4012A402130
+:103120008D04000000800008000000003C0308003F
+:103130008C6331A831693FFF0009998000728021BA
+:10314000021370212405FF80264D0100264C0080CB
+:103150003C02800031B1007F3198007F31CA007F8E
+:103160003C1F800A3C1980043C0F800C01C52024C0
+:1031700001A5302401853824014F1821AC460024D4
+:10318000023F402103194821AC470090AC4400287D
+:10319000AF830048AF88003CAF8900340E0019317E
+:1031A000016080213C0380008C6B01B80560FFFE4C
+:1031B0008F8700488F86003C3465018090E8000DC1
+:1031C000ACB20000A4B000060008260000041603FC
+:1031D00000029027001227C21080008124C20088BC
+:1031E000241F6082A4BF0008A0A0000524020002E2
+:1031F000A0A2000B8F8B0034000424003C082700A1
+:1032000000889025ACB20010ACA00014ACA0002443
+:10321000ACA00028ACA0002C8D6900382413FF80DE
+:10322000ACA9001890E3000D02638024320500FF72
+:1032300010A000058FBF002090ED000D31AC007F85
+:10324000A0EC000D8FBF00208FB3001C8FB20018C0
+:103250008FB100148FB000103C0A10003C0E8000AB
+:1032600027BD002803E00008ADCA01B8265F0100B1
+:103270002405FF8033F8007F3C06800003E57824B6
+:103280003C19800A03192021ACCF0024908E00D471
+:1032900000AE682431AC00FF11800024AF84003CF4
+:1032A000248E008895CD00123C0C08008D8C31A82E
+:1032B00031AB3FFF01924821000B5180012A402190
+:1032C00001052024ACC400283107007F3C06800C97
+:1032D00000E620219083000D00A31024304500FF5C
+:1032E00010A0FFD8AF8400489098000D330F001055
+:1032F00015E0FFD58FBF00200E001931000000003F
+:103300003C0380008C7901B80720FFFE000000001C
+:10331000AE1200008C7F0144AE1F0004A61100080D
+:1033200024110002A211000BAE1300243C1308016B
+:1033300092739790327000015200FFC38FBF00203C
+:103340000E00216E024020210A00208B8FBF00203A
+:103350003C1260008E452C083C03F0033462FFFFF2
+:1033600000A2F824AE5F2C088E582C083C1901C02E
+:1033700003199825AE532C080A00208B8FBF00201C
+:10338000264D010031AF007F3C10800A240EFF80E3
+:1033900001F0282101AE60243C0B8000AD6C0024BC
+:1033A0001660FFA8AF85003C24110003A0B100FC0B
+:1033B0000A00208B8FBF002026480100310A007FC1
+:1033C0003C0B800A2409FF80014B30210109202495
+:1033D0003C078000ACE400240A00208AAF86003C51
+:1033E000944E0012320C3FFF31CD3FFF15ACFF7DF4
+:1033F000241F608290D900D42418FF8003197824F8
+:1034000031EA00FF1140FF770000000024070004AC
+:10341000A0C700FC8F870048241160842406000D9B
+:10342000A4B10008A0A600050A002075240200022D
+:103430003C0400012484977C24030014240200FE31
+:103440003C010800AC2431EC3C010800AC2331E81D
+:103450003C010801A42297983C0408012484979811
+:103460000000182100643021A0C30004246300017F
+:103470002C6500FF54A0FFFC006430213C070800CD
+:1034800024E7010003E00008AF87007C00A058217A
+:10349000008048210000102114A0001200005021DB
+:1034A0000A00216A000000003C010801A42097984E
+:1034B0003C05080194A597988F82007C3C0C08017C
+:1034C000258C979800E2182100AC2021014B302B6D
+:1034D000A089000400001021A460000810C0003979
+:1034E000010048218F86007C0009384000E9402116
+:1034F0000008388000E6282190A8000B90B9000A47
+:103500000008204000881021000218800066C021B9
+:10351000A319000A8F85007C00E5782191EE000A4E
+:1035200091E6000B000E684001AE6021000C208087
+:1035300000851021A046000B3C0308019063979280
+:10354000106000222462FFFF8F83003C3C010801D1
+:10355000A0229792906C00FF1180000400000000F0
+:10356000906E00FF25CDFFFFA06D00FF3C19080104
+:1035700097399798272300013078FFFF2F0F00FF1E
+:1035800011E0FFC9254A00013C010801A4239798D6
+:103590003C05080194A597988F82007C3C0C08019B
+:1035A000258C979800E2182100AC2021014B302B8C
+:1035B000A089000400001021A460000814C0FFC905
+:1035C0000100482103E000080000000003E00008BB
+:1035D0002402000227BDFFE0248501002407FF80AC
+:1035E000AFB00010AFBF0018AFB1001400A718248F
+:1035F0003C10800030A4007F3C06800A0086282111
+:103600008E110024AE03002490A200FF1440000895
+:10361000AF85003CA0A000098FBF0018AE110024A8
+:103620008FB100148FB0001003E0000827BD002008
+:1036300090A900FD90A800FF312400FF0E00211C7E
+:10364000310500FF8F85003C8FBF0018A0A0000946
+:10365000AE1100248FB100148FB0001003E00008F9
+:1036600027BD002027BDFFD0AFB20020AFB1001CA6
+:10367000AFB00018AFBF002CAFB40028AFB3002428
+:103680003C0980009533011635320C00952F011A44
+:103690003271FFFF023280218E08000431EEFFFFFD
+:1036A000248B0100010E6821240CFF8025A5FFFF5B
+:1036B000016C50243166007F3C07800AAD2A00244B
+:1036C00000C73021AF850078AF8800743C01080145
+:1036D000A020979190C300090200D021008098217A
+:1036E000306300FF2862000510400048AF86003CB0
+:1036F000286400021480008E24140001240D0005AB
+:103700003C010801A02D977590CC00FD3C010801FB
+:10371000A02097763C010801A020977790CB000A63
+:10372000240AFF80318500FF014B4824312700FF28
+:1037300010E0000C000058213C1280083651008037
+:103740008E2F00308CD0005C01F0702305C0018EFC
+:103750008F87007490D4000A3284007FA0C4000ACE
+:103760008F86003C3C118008363000808E0F003080
+:103770008F87007400EF702319C000EE0000000076
+:1037800090D4000924120002328400FF10920247F4
+:10379000000000008CC2005800E2F82327F9FFFF68
+:1037A0001B2001300000000090C50009240800041F
+:1037B00030A300FF10680057240A00013C010801F3
+:1037C000A02A977590C900FF252700013C01080138
+:1037D000A02797743C0308019063977524060005A1
+:1037E0001066006A2C780005130000C400009021C8
+:1037F0000003F8803C0408012484962003E4C821D7
+:103800008F25000000A0000800000000241800FF21
+:103810001078005C0000000090CC000A90CA0009FB
+:103820003C080801910897913187008000EA4825FB
+:103830003C010801A029977C90C500FD3C140801BB
+:1038400092949792311100013C010801A025977DC7
+:1038500090DF00FE3C010801A03F977E90D200FF60
+:103860003C010801A032977F8CD900543C0108012B
+:10387000AC3997808CD000583C010801AC3097845B
+:103880008CC3005C3C010801AC34978C3C010801FE
+:10389000AC239788162000088FBF002C8FB4002817
+:1038A0008FB300248FB200208FB1001C8FB000189E
+:1038B00003E0000827BD00303C1180009624010E73
+:1038C0000E000FD43094FFFF3C0B08018D6B9794D2
+:1038D0000260382102802821AE2B01803C130801B0
+:1038E0008E73977401602021240600830E00102F30
+:1038F000AFB300108FBF002C8FB400288FB300240B
+:103900008FB200208FB1001C8FB0001803E00008B8
+:1039100027BD00303C1808008F1831FC270F00012C
+:103920003C010800AC2F31FC0A0021FF0000000020
+:103930001474FFB900000000A0C000FF3C0508009F
+:103940008CA531E43C0308008C6331E03C020800A4
+:103950008C4232048F99003C34A80001241F0002DD
+:103960003C010801AC2397943C010801A0289790E2
+:103970003C010801A0229793A33F00090A0021B847
+:103980008F86003C0E00216E000000000A0021FF1F
+:103990008F86003C3C1F080193FF97742419000197
+:1039A00013F902298F8700743C1008019210977850
+:1039B0003C06080190C6977610C000050200A021C1
+:1039C0003C04080190849779109001E48F87007C73
+:1039D000001088408F9F007C023048210009C88079
+:1039E000033F702195D80008270F0001A5CF0008DC
+:1039F0003C040801908497793C05080190A59776CE
+:103A00000E00211C000000008F87007C0230202166
+:103A10000004308000C720218C8500048F8200784C
+:103A200000A2402305020006AC8200048C8A00003C
+:103A30008F830074014310235C400001AC830000BD
+:103A40008F86003C90CB00FF2D6C00025580002D2E
+:103A5000241400010230F821001F408001072821B2
+:103A600090B9000B8CAE00040019C04003197821F6
+:103A7000000F1880006710218C4D000001AE8823D4
+:103A80002630FFFF5E00001F241400018C44000458
+:103A90008CAA0000008A482319200019240E000473
+:103AA0003C010801A02E977590AD000B8CAB000473
+:103AB000000D8840022D8021001010800047102149
+:103AC0008C440004016460230582020094430008D2
+:103AD00090DF00FE90B9000B33E500FF54B90004FD
+:103AE0000107A021A0D400FE8F87007C0107A02140
+:103AF0009284000B0E00211C240500018F86003CDF
+:103B000024140001125400962E50000116000042A9
+:103B10003C08FFFF241900021659FF3F0000000077
+:103B2000A0C000FF8F86003CA0D200090A0021FF40
+:103B30008F86003C90C700092404000230E300FF98
+:103B40001064016F24090004106901528F88007805
+:103B50008CCE0054010E682325B1000106200175AA
+:103B6000241800043C010801A03897753C010801A5
+:103B7000A020977490D400FD90D200FF2E4F000239
+:103B800015E0FF14328400FF000438408F89007C68
+:103B900090DF00FF00E41021000220800089C8218E
+:103BA0002FE500029324000B14A0FF0A2407000253
+:103BB0000004184000648021001058800169282109
+:103BC0008CAC0004010C50230540FF0200000000F3
+:103BD0003C0308019063977614600005246F000190
+:103BE0003C010801A02497793C010801A0279777A0
+:103BF0003C010801A02F977690CE00FF24E700013A
+:103C000031CD00FF01A7882B1220FFE990A4000B03
+:103C10000A0021EE000000003C0508018CA5977405
+:103C20003C12000400A8F82413F200062402000548
+:103C30003C09080191299775152000022402000310
+:103C4000240200053C010801A022979190C700FFC3
+:103C500014E0012024020002A0C200090A0021FF92
+:103C60008F86003C90CC00FF1180FEDA240A000110
+:103C70008F8C00788F89007C240F000301806821DD
+:103C80001160001E240E0002000540400105A02125
+:103C900000142080008990218E510004019180231E
+:103CA0000600FECC000000003C020801904297761E
+:103CB00014400005245800013C010801A02A977710
+:103CC0003C010801A02597793C010801A0389776AE
+:103CD00090DF00FF010510210002C88033E500FFDE
+:103CE000254A00010329202100AA402B1500FEB916
+:103CF0009085000B1560FFE5000540400005404041
+:103D000001051821000310803C010801A02A9774C6
+:103D10003C010801A0259778004918218C64000413
+:103D200000E4F82327F9FFFF1F20FFE9000000004F
+:103D30008C63000000E358230560013A01A3882347
+:103D400010E301170184C0231B00FEA20000000045
+:103D50003C010801A02E97750A00232D240B0001B9
+:103D6000240E0004A0CE00093C0D08008DAD31F8F2
+:103D70008F86003C25A200013C010800AC2231F8EE
+:103D80000A0021FF000000008CD9005C00F9C0236C
+:103D90001F00FE7B000000008CDF005C10FFFF6551
+:103DA0008F8400788CC3005C0083402325020001CF
+:103DB0001C40FF60000000008CC9005C24870001EB
+:103DC00000E9282B10A0FE943C0D80008DAB01046F
+:103DD0003C0C0001016C50241140FE8F24020010A5
+:103DE0003C010801A02297910A0021FF0000000079
+:103DF0008F9100788F86003C26220001ACC2005CC7
+:103E00000A0022BA241400018F87003C2404FF809A
+:103E10000000882190E9000A2414000101243025C3
+:103E2000A0E6000A3C05080190A597763C0408012D
+:103E3000908497790E00211C000000008F86003CC2
+:103E40008F85007C90C800FD310700FF00074040CF
+:103E50000107F821001FC0800305C8219323000B30
+:103E6000A0C300FD8F85007C8F86003C0305602188
+:103E7000918F000B000F704001CF6821000D8080F2
+:103E8000020510218C4B0000ACCB00548D84000443
+:103E90008F830078006450231940000224820001BF
+:103EA0002462000101074821ACC2005C0009308097
+:103EB00000C5402100E02021240500010E00211C46
+:103EC0009110000B8F86003C90C500FF10A0FF0CE6
+:103ED000001070408F85007C01D06821000D10809B
+:103EE000004558218D6400008F8C00780184502398
+:103EF0002547000104E0FF02263100013C030801D0
+:103F0000906397762E2F0002247800013C0108016F
+:103F1000A03897763C010801A034977711E0FEF8AD
+:103F2000020038210A00238D000740408F84003CA6
+:103F30008F8300788C85005800A340230502FE9AE9
+:103F4000AC8300580A002263000000003C0708010F
+:103F500090E79792240200FF10E200BE8F86003C9B
+:103F60003C1108019631979A3C0308012463979805
+:103F7000262500013230FFFF30ABFFFF0203602136
+:103F80002D6A00FF1540008D918700043C01080157
+:103F9000A420979A8F88003C0007484001272821D9
+:103FA000911800FF0005308024050001271400014E
+:103FB000A11400FF3C120801925297928F88007C56
+:103FC0008F8E0074264F000100C820213C0108019B
+:103FD000A02F9792AC8E00008F8D0078A4850008EA
+:103FE000AC8D00043C030801906397741460007763
+:103FF000000090213C010801A0259774A087000BC8
+:104000008F8C007C00CC5021A147000A8F82003C9D
+:10401000A04700FD8F84003CA08700FE8F86003CF7
+:104020008F9F0074ACDF00548F990078ACD9005892
+:104030008F8D007C0127C02100185880016DA021C0
+:10404000928F000A000F704001CF18210003888072
+:10405000022D8021A207000B8F86007C0166602163
+:10406000918A000B000A1040004A20210004288099
+:1040700000A64021A107000A3C07800834E900801F
+:104080008D2200308F86003CACC2005C0A0022BA50
+:104090002414000190CA00FF1540FEAD8F880078FF
+:1040A000A0C400090A0021FF8F86003CA0C000FDCB
+:1040B0008F98003C24060001A30000FE3C0108018B
+:1040C000A02697753C010801A02097740A0021EEF4
+:1040D0000000000090CB00FF3C04080190849793FF
+:1040E000316C00FF0184502B1540000F24020003A7
+:1040F00024020004A0C200090A0021FF8F86003CB0
+:1041000090C3000A2410FF8002035824316C00FF82
+:104110001180FDC1000000003C010801A02097753E
+:104120000A0021EE00000000A0C200090A0021FFE1
+:104130008F86003C90D4000A2412FF800254482449
+:10414000312800FF1500FFF4240200083C0108019B
+:10415000A02297910A0021FF000000000010884073
+:104160008F8B0074023018210003688001A7202182
+:10417000AC8B00008F8A0078240C0001A48C00080E
+:10418000AC8A00043C05080190A597762402000142
+:1041900010A2FE1E24A5FFFF0A0022799084000BC6
+:1041A0000184A0231A80FD8B000000003C0108015F
+:1041B000A02E97750A00232D240B00013C01080155
+:1041C000A425979A0A0023DF8F88003C240B000166
+:1041D000106B00228F98003C8F85003C90BF00FF41
+:1041E00033F900FF1079002B000000003C1F08018C
+:1041F00093FF9778001FC840033FC0210018A0809C
+:104200000288782191EE000AA08E000A8F8D007C32
+:104210003C0308019063977800CD88210A002405AB
+:10422000A223000B263000010600003101A49023D8
+:104230000640002B240200033C010801A02F9775C3
+:104240000A00232D240B00018F89003C0A00226301
+:10425000AD2700540A0022B924120001931400FD76
+:10426000A094000B8F88003C8F8F007C910E00FE85
+:1042700000CF6821A1AE000A8F91003CA22700FD6B
+:104280008F8300748F90003CAE0300540A00240614
+:104290008F8D007C90B000FEA090000A8F8B003CB8
+:1042A0008F8C007C916A00FD00CC1021A04A000B8D
+:1042B0008F84003CA08700FE8F8600788F85003CAD
+:1042C000ACA600580A0024068F8D007C94B8000824
+:1042D000ACA40004030378210A0022ADA4AF0008B7
+:1042E0003C010801A02297750A0021EE00000000A1
+:1042F00090CF0009240D000431EE00FF11CDFD85A3
+:10430000240200013C010801A02297750A0021EE59
+:0443100000000000A9
+:0C43140008003344080033440800342043
+:10432000080033F4080033D8080033280800332885
+:10433000080033280800334C800801008008008002
+:10434000800800005F865437E4AC62CC50103A45D8
+:1043500036621985BF14C0E81BC27A1E84F4B556B4
+:10436000094EA6FE7DDA01E7C04D748108005B3876
+:1043700008005B7C08005B2008005B2008005B20D5
+:1043800008005B2008005B3808005B2008005B2009
+:1043900008005B8408005B2008005A9808005B2036
+:1043A00008005B2008005B8408005B2008005B209D
+:1043B00008005B2008005B2008005B2008005B20F1
+:1043C00008005B2008005B2008005B2008005B20E1
+:1043D00008005B5808005B2008005B5808005B2061
+:1043E00008005B2008005B2008005B5C08005B584D
+:1043F00008005B2008005B2008005B2008005B20B1
+:1044000008005B2008005B2008005B2008005B20A0
+:1044100008005B2008005B2008005B2008005B2090
+:1044200008005B2008005B2008005B2008005B2080
+:1044300008005B2008005B2008005B2008005B2070
+:1044400008005B5C08005B5C08005B2008005B5CAC
+:1044500008005B2008005B2008005B2008005B2050
+:1044600008005B2008005B2008005B2008005B2040
+:1044700008005B2008005B2008005B2008005B2030
+:1044800008005B2008005B2008005B2008005B2020
+:1044900008005B2008005B2008005B2008005B2010
+:1044A00008005B2008005B2008005B2008005B2000
+:1044B00008005B2008005B2008005B2008005B20F0
+:1044C00008005B2008005B2008005B2008005B20E0
+:1044D00008005B2008005B2008005B2008005B20D0
+:1044E00008005B2008005B2008005B2008005B20C0
+:1044F00008005B2008005B2008005B2008005B20B0
+:1045000008005B2008005B2008005B2008005B209F
+:1045100008005B2008005B2008005B2008005B208F
+:1045200008005B2008005B2008005B2008005B207F
+:1045300008005B2008005B2008005B2008005B206F
+:1045400008005B2008005B2008005B2008005B205F
+:1045500008005B2008005B2008005B2008005B204F
+:1045600008005B2008005B2008005B2008005BA0BF
+:10457000080078F008007B54080078FC080076F00A
+:10458000080078FC08007988080078FC080076F0BC
+:10459000080076F0080076F0080076F0080076F063
+:1045A000080076F0080076F0080076F0080076F053
+:1045B000080076F00800791C0800790C080076F0F5
+:1045C000080076F0080076F0080076F0080076F033
+:1045D000080076F0080076F0080076F0080076F023
+:1045E000080076F0080076F0080076F00800790CF4
+:1045F0000800839C08008228080083640800822841
+:1046000008008334080081100800822808008228EE
+:1046100008008228080082280800822808008228D2
+:1046200008008228080082280800822808008228C2
+:1046300008008228080082280800825008008DD4D3
+:1046400008008F3008008F100800897808008DEC72
+:104650000A00012400000000000000000000000D1E
+:10466000747061362E322E31000000000602010106
+:10467000000000000000000000000000000000003A
+:10468000000000000000000000000000000000002A
+:10469000000000000000000000000000000000001A
+:1046A000000000000000000000000000000000000A
+:1046B00000000000000000000000000000000000FA
+:1046C00000000000000000000000000000000000EA
+:1046D00000000000000000000000000000000000DA
+:1046E0000000000010000003000000000000000DAA
+:1046F0000000000D3C020800244217203C03080083
+:1047000024632A10AC4000000043202B1480FFFDDE
+:10471000244200043C1D080037BD2FFC03A0F021FB
+:104720003C100800261004903C1C0800279C172011
+:104730000E000262000000000000000D2402FF8055
+:1047400027BDFFE000821024AFB00010AF42002070
+:10475000AFBF0018AFB10014936500043084007F30
+:10476000034418213C0200080062182130A50020F3
+:10477000036080213C080111277B000814A000027F
+:104780002466005C246600589202000497430104EA
+:10479000920400043047000F3063FFFF3084004074
+:1047A00000672823108000090000482192020005BC
+:1047B00030420004104000050000000010A000037B
+:1047C0000000000024A5FFFC24090004920200055B
+:1047D00030420004104000120000000010A0001041
+:1047E000000000009602000200A7202101044025DD
+:1047F0002442FFFEA7421016920300042402FF8009
+:1048000000431024304200FF104000033C0204002B
+:104810000A000174010240258CC20000AF4210184A
+:104820008F4201780440FFFE2402000AA7420140A3
+:1048300096020002240400093042000700021023FF
+:1048400030420007A7420142960200022442FFFEC6
+:10485000A7420144A740014697420104A7420148EC
+:104860008F42010830420020504000012404000122
+:104870009202000430420010144000023483001001
+:1048800000801821A743014A00000000000000003A
+:104890000000000000000000AF4810000000000011
+:1048A0000000000000000000000000008F42100027
+:1048B0000441FFFE3102FFFF10400007000000002E
+:1048C0009202000430420040144000030000000047
+:1048D0008F421018ACC20000960200063042FFFF63
+:1048E00024420002000210430002104003628821AB
+:1048F000962200001120000D3044FFFF00A7102178
+:104900008F8300388F45101C000210820002108037
+:1049100000431021AC45000030A6FFFF0E00058DBE
+:1049200000052C0200402021A62200009203000472
+:104930002402FF8000431024304200FF1040001F7B
+:104940000000000092020005304200021040001BEF
+:10495000000000009742100C2442FFFEA7421016F0
+:10496000000000003C02040034420030AF4210005E
+:104970000000000000000000000000000000000037
+:104980008F4210000441FFFE000000009742100C0F
+:104990008F45101C3042FFFF24420030000210827D
+:1049A00000021080005B1021AC45000030A6FFFF24
+:1049B0000E00058D00052C02A622000096040002C0
+:1049C000248400080E0001E93084FFFF97440104AD
+:1049D0000E0001F73084FFFF8FBF00188FB1001465
+:1049E0008FB000103C02100027BD002003E000083B
+:1049F000AF4201783084FFFF308200078F850024AA
+:104A000010400002248300073064FFF800A4102146
+:104A100030421FFF03421821247B4000AF8500284D
+:104A2000AF82002403E00008AF4200843084FFFF1F
+:104A30003082000F8F85002C8F86003410400002DA
+:104A40002483000F3064FFF000A410210046182BCF
+:104A5000AF8500300046202314600002AF82002C96
+:104A6000AF84002C8F82002C340480000342182174
+:104A700000641821AF83003803E00008AF420080D3
+:104A80008F820014104000088F8200048F82FFDCA8
+:104A9000144000058F8200043C02FFBF3442FFFF38
+:104AA000008220248F82000430430006240200028A
+:104AB0001062000F3C0201012C620003504000050F
+:104AC000240200041060000F3C0200010A000230C2
+:104AD0000000000010620005240200061462000CB1
+:104AE0003C0201110A000229008210253C0200113B
+:104AF00000821025AF421000240200010A0002309B
+:104B0000AF82000C00821025AF421000AF80000C75
+:104B100000000000000000000000000003E00008AA
+:104B2000000000008F82000C104000040000000014
+:104B30008F4210000441FFFE0000000003E0000867
+:104B4000000000008F8200102443F800000231C2F0
+:104B500024C2FFF02C630301106000030002104226
+:104B60000A000257AC8200008F85001800C5102B88
+:104B70001440000B0000182100C510232447000139
+:104B80008F82001C00A210212442FFFF0046102B40
+:104B9000544000042402FFFF0A000257AC870000C3
+:104BA0002402FFFF0A000260AC8200008C82000039
+:104BB00000021940006218210003188000621821C9
+:104BC000000318803C0208002442175C0062182190
+:104BD00003E000080060102127BDFFD8AFBF002010
+:104BE000AFB1001CAFB000183C0460088C825000CC
+:104BF0002403FF7F3C066000004310243442380C3D
+:104C0000AC8250008CC24C1C3C1A80000002160280
+:104C10003042000F10400007AF82001C8CC34C1CB8
+:104C20003C02001F3442FC0000621824000319C239
+:104C3000AF8300188F420008275B40003442000118
+:104C4000AF420008AF8000243C02601CAF400080EF
+:104C5000AF4000848C4500088CC3080834028000F3
+:104C6000034220212402FFF0006218243C0200804D
+:104C70003C010800AC2204203C025709AF840038F4
+:104C800014620004AF850034240200010A0002927D
+:104C9000AF820014AF8000148F4200003842000140
+:104CA000304200011440FFFC8F82001410400016B7
+:104CB0000000000097420104104000058F830000AF
+:104CC000146000072462FFFF0A0002A72C62000A9A
+:104CD0002C620010504000048F8300002462000109
+:104CE000AF8200008F8300002C62000A1440000392
+:104CF0002C6200070A0002AEAF80FFDC1040000209
+:104D000024020001AF82FFDC8F4301088F440100C1
+:104D100030622000AF83000410400008AF84001010
+:104D20003C0208008C42042C244200013C01080093
+:104D3000AC22042C0A00058A3C02400030650200C7
+:104D400014A0000324020F001482026024020D004C
+:104D500097420104104002C83C024000306240000B
+:104D6000144000AD8F8200388C4400088F420178D7
+:104D70000440FFFE24020800AF420178240200082C
+:104D8000A7420140A7400142974201048F840004DA
+:104D90003051FFFF308200011040000702208021C7
+:104DA0002623FFFE240200023070FFFFA7420146C7
+:104DB0000A0002DBA7430148A74001463C02080065
+:104DC0008C42043C1440000D8F8300103082002080
+:104DD0001440000224030009240300010060202184
+:104DE0008F83001024020900506200013484000403
+:104DF000A744014A0A0002F60000000024020F0046
+:104E00001462000530820020144000062403000DC7
+:104E10000A0002F5240300051440000224030009DF
+:104E200024030001A743014A3C0208008C420420ED
+:104E30003C0400480E00020C004420250E00023500
+:104E4000000000008F82000C1040003E00000000B7
+:104E50008F4210003C030020004310241040003912
+:104E60008F82000430420002104000360000000033
+:104E700097421014144000330000000097421008BD
+:104E80008F8800383042FFFF24420006000218825B
+:104E90000003388000E83021304300018CC400005A
+:104EA00010600004304200030000000D0A000337C8
+:104EB00000E81021544000103084FFFF3C05FFFF44
+:104EC00000852024008518260003182B0004102BD1
+:104ED0000043102410400005000000000000000006
+:104EE0000000000D00000000240002228CC200001F
+:104EF0000A000336004520253883FFFF0003182BE6
+:104F00000004102B00431024104000050000000096
+:104F1000000000000000000D000000002400022B33
+:104F20008CC200003444FFFF00E81021AC440000B4
+:104F30003C0208008C420430244200013C0108007D
+:104F4000AC2204308F6200008F840038AF820008EA
+:104F50008C8300003402FFFF1462000F0000102158
+:104F60003C0508008CA504543C0408008C840450C3
+:104F700000B0282100B0302B0082202100862021A3
+:104F80003C010800AC2504543C010800AC2404504A
+:104F90000A000580240400088C82000030420100D1
+:104FA0001040000F000010213C0508008CA5044CA7
+:104FB0003C0408008C84044800B0282100B0302B49
+:104FC00000822021008620213C010800AC25044CF1
+:104FD0003C010800AC2404480A00058024040008B1
+:104FE0003C0508008CA504443C0408008C84044063
+:104FF00000B0282100B0302B008220210086202123
+:105000003C010800AC2504443C010800AC240440E9
+:105010000A000580240400088F6200088F620000E7
+:1050200000021602304300F0240200301062000536
+:1050300024020040106200E08F8200200A000588F0
+:105040002442000114A00005000000000000000040
+:105050000000000D00000000240002568F4201787D
+:105060000440FFFE000000000E00023D27A40010D7
+:105070001440000500408021000000000000000DE9
+:10508000000000002400025D8E02000010400005B8
+:1050900000000000000000000000000D0000000003
+:1050A000240002608F62000C04430003240200010C
+:1050B0000A00042EAE000000AE0200008F8200380D
+:1050C0008C480008A20000078F65000C8F64000464
+:1050D00030A3FFFF0004240200852023308200FF5C
+:1050E0000043102124420005000230832CC20081BD
+:1050F000A605000A14400005A204000400000000F8
+:105100000000000D00000000240002788F850038A8
+:105110000E0005AB260400148F6200048F430108C3
+:10512000A60200083C02100000621824106000086B
+:105130000000000097420104920300072442FFECA4
+:10514000346300023045FFFF0A0003C3A2030007D7
+:10515000974201042442FFF03045FFFF9606000805
+:105160002CC200135440000592030007920200076E
+:1051700034420001A202000792030007240200014A
+:1051800010620005240200031062000B8F820038B9
+:105190000A0003E030C6FFFF8F8200383C04FFFFA7
+:1051A0008C43000C0064182400651825AC43000CE7
+:1051B0000A0003E030C6FFFF3C04FFFF8C430010F1
+:1051C0000064182400651825AC43001030C6FFFFAA
+:1051D00024C2000200021083A20200058F8300385F
+:1051E000304200FF00021080004328218CA80000FC
+:1051F0008CA20000240300040002170214430012D2
+:1052000000000000974201043C03FFFF0103182443
+:105210003042FFFF004610232442FFFE006240257B
+:10522000ACA8000092030005306200FF000210806D
+:1052300000501021904200143042000F0043102112
+:105240000A000415A20200068CA40004974201047F
+:105250009603000A3088FFFF3042FFFF004610230C
+:105260002442FFD60002140001024025ACA800042D
+:1052700092020007920400052463002800031883AB
+:105280000064182134420004A2030006A2020007B1
+:105290008F8200042403FFFB3442000200431024E9
+:1052A000AF820004920300068F8700380003188045
+:1052B000007010218C4400203C02FFF63442FFFFB6
+:1052C0000082402400671821AE04000CAC68000C7A
+:1052D000920500063C03FF7F8E02000C000528802B
+:1052E00000B020213463FFFF01033024948800269E
+:1052F00000A7282100431024AE02000CAC86002039
+:10530000AC880024ACA8001024020010A742014081
+:1053100024020002A7400142A7400144A7420146DF
+:10532000974201043C0400082442FFFEA7420148C2
+:10533000240200010E00020CA742014A9603000A53
+:105340009202000400431021244200023042000770
+:1053500000021023304200070E000235AE0200109A
+:105360008F6200003C0308008C6304442404001096
+:10537000AF820008974201043042FFFF2442FFFE43
+:1053800000403821000237C33C0208008C42044030
+:10539000006718210067282B0046102100451021C6
+:1053A0003C010800AC2304443C010800AC2204404A
+:1053B0000A0005150000000014A000050000000010
+:1053C000000000000000000D000000002400030A9F
+:1053D0008F4201780440FFFE000000000E00023DF5
+:1053E00027A40014144000050040802100000000A4
+:1053F0000000000D00000000240003118E020000D8
+:105400005440000692020007000000000000000D5A
+:10541000000000002400031C920200073042000438
+:10542000104000058F8200042403FFFB3442000279
+:1054300000431024AF8200048F620004044300087C
+:1054400092020007920200068E03000CAE000000DC
+:105450000002108000501021AC430020920200078F
+:1054600030420004544000099602000A92020005EE
+:105470003C03000100021080005010218C460018EF
+:1054800000C33021AC4600189602000A92060004C0
+:10549000277100080220202100C2302124C6000507
+:1054A000260500140E0005AB0006308292040006AB
+:1054B0008F6500043C027FFF0004208000912021C2
+:1054C0008C8300043442FFFF00A2282400651821C9
+:1054D000AC830004920200079204000592030004CA
+:1054E000304200041040001496070008308400FF8A
+:1054F00000042080009120218C8600049742010442
+:105500009605000A306300FF3042FFFF0043102180
+:105510000045102130E3FFFF004310232442FFD851
+:1055200030C6FFFF0002140000C23025AC86000424
+:105530000A0004C992030007308500FF0005288097
+:1055400000B128218CA4000097420104306300FFC1
+:105550003042FFFF00431021004710233C03FFFFB0
+:10556000008320243042FFFF00822025ACA40000ED
+:1055700092030007240200011062000600000000F0
+:105580002402000310620011000000000A0004EC75
+:105590008E03001097420104920300049605000A4E
+:1055A0008E24000C00431021004510212442FFF2FC
+:1055B0003C03FFFF008320243042FFFF00822025B0
+:1055C000AE24000C0A0004EC8E0300109742010484
+:1055D000920300049605000A8E2400100043102157
+:1055E000004510212442FFEE3C03FFFF00832024EE
+:1055F0003042FFFF00822025AE2400108E030010F1
+:105600002402000AA7420140A74301429603000A70
+:10561000920200043C04004000431021A7420144D0
+:10562000A740014697420104A74201482402000115
+:105630000E00020CA742014A0E00023500000000D5
+:105640008F6200009203000400002021AF82000856
+:10565000974201049606000A3042FFFF00621821BB
+:10566000006028213C0308008C6304443C020800CD
+:105670008C42044000651821004410210065382B3D
+:10568000004710213C010800AC2304443C01080001
+:10569000AC22044092040004008620212484000AE5
+:1056A0003084FFFF0E0001E9000000009744010470
+:1056B0003084FFFF0E0001F7000000003C021000E4
+:1056C000AF4201780A0005878F82002014820027EC
+:1056D0003062000697420104104000673C0240001F
+:1056E0003062400010400005000000000000000093
+:1056F0000000000D00000000240004208F4201780B
+:105700000440FFFE24020800AF4201782402000892
+:10571000A7420140A74001428F8200049743010441
+:1057200030420001104000073070FFFF2603FFFEEB
+:1057300024020002A7420146A74301480A00053F90
+:105740002402000DA74001462402000DA742014A91
+:105750008F62000024040008AF8200080E0001E9F7
+:10576000000000000A00051902002021104000423C
+:105770003C02400093620000304300F0240200101D
+:105780001062000524020070106200358F82002034
+:105790000A000588244200018F620000974301043B
+:1057A0003050FFFF3071FFFF8F4201780440FFFE51
+:1057B0003202000700021023304200072403000ACF
+:1057C0002604FFFEA7430140A7420142A74401442B
+:1057D000A7400146A75101488F42010830420020EE
+:1057E000144000022403000924030001A743014AD6
+:1057F0000E00020C3C0400400E00023500000000C8
+:105800003C0708008CE70444021110212442FFFEEB
+:105810003C0608008CC604400040182100E33821F3
+:10582000000010218F65000000E3402B00C23021F2
+:105830002604000800C830213084FFFFAF8500082F
+:105840003C010800AC2704443C010800AC2604409D
+:105850000E0001E9000000000A00051902202021C5
+:105860000E00013B000000008F8200202442000156
+:10587000AF8200203C024000AF4201380A00029291
+:10588000000000003084FFFF30C6FFFF00052C0041
+:1058900000A628253882FFFF004510210045282B4F
+:1058A0000045102100021C023042FFFF004310217E
+:1058B00000021C023042FFFF004310213842FFFF6C
+:1058C00003E000083042FFFF3084FFFF30A5FFFFF8
+:1058D0000000182110800007000000003082000145
+:1058E0001040000200042042006518210A0005A1B2
+:1058F0000005284003E000080060102110C00006E9
+:1059000024C6FFFF8CA2000024A50004AC82000086
+:105910000A0005AB2484000403E000080000000036
+:1059200010A0000824A3FFFFAC86000000000000C8
+:10593000000000002402FFFF2463FFFF1462FFFA4F
+:0C5940002484000403E0000800000000C4
+:04594C000000000156
+:105950000A00002A00000000000000000000000D06
+:10596000747870362E322E310000000006020100DD
+:1059700000000000000001360000EA6000000000A6
+:105980000000000000000000000000000000000017
+:105990000000000000000000000000000000000007
+:1059A00000000000000000000000000000000000F7
+:1059B00000000016000000000000000000000000D1
+:1059C00000000000000000000000000000000000D7
+:1059D00000000000000000000000000000000000C7
+:1059E000000000000000000000001388000000001C
+:1059F000000005DC000000000000000010000003B3
+:105A0000000000000000000D0000000D3C02080036
+:105A100024423D883C0308002463403CAC40000025
+:105A20000043202B1480FFFD244200043C1D08008D
+:105A300037BD7FFC03A0F0213C100800261000A811
+:105A40003C1C0800279C3D880E00044E000000000E
+:105A50000000000D27BDFFB4AFA10000AFA20004FD
+:105A6000AFA30008AFA4000CAFA50010AFA60014B0
+:105A7000AFA70018AFA8001CAFA90020AFAA002450
+:105A8000AFAB0028AFAC002CAFAD0030AFAE0034F0
+:105A9000AFAF0038AFB8003CAFB90040AFBC004476
+:105AA000AFBF00480E000591000000008FBF004806
+:105AB0008FBC00448FB900408FB8003C8FAF0038D6
+:105AC0008FAE00348FAD00308FAC002C8FAB002830
+:105AD0008FAA00248FA900208FA8001C8FA7001870
+:105AE0008FA600148FA500108FA4000C8FA30008B0
+:105AF0008FA200048FA1000027BD004C3C1B600456
+:105B00008F7A5030377B502803400008AF7A00006E
+:105B10008F86003C3C0390003C02800000862825D4
+:105B200000A32025AC4400203C0380008C670020AB
+:105B300004E0FFFE0000000003E000080000000099
+:105B40000A000070240400018F85003C3C048000A2
+:105B50003483000100A3102503E00008AC8200207C
+:105B600003E00008000010213084FFFF30A5FFFF94
+:105B70001080000700001821308200011040000250
+:105B800000042042006518211480FFFB0005284016
+:105B900003E000080060102110C0000700000000B2
+:105BA0008CA2000024C6FFFF24A50004AC820000E4
+:105BB00014C0FFFB2484000403E000080000000080
+:105BC00010A0000824A3FFFFAC8600000000000026
+:105BD000000000002402FFFF2463FFFF1462FFFAAD
+:105BE0002484000403E000080000000090AA0031B3
+:105BF0008FAB00108CAC00403C0300FF8D680004AC
+:105C0000AD6C00208CAD004400E060213462FFFFE9
+:105C1000AD6D00248CA700483C09FF000109C02499
+:105C2000AD6700288CAE004C0182C824031978258A
+:105C3000AD6F0004AD6E002C8CAD0038314A00FF12
+:105C4000AD6D001C94A900323128FFFFAD68001033
+:105C500090A70030A5600002A1600004A1670000C9
+:105C600090A30032306200FF00021982106000052C
+:105C7000240500011065000E0000000003E000088C
+:105C8000A16A00018CD80028354A0080AD78001840
+:105C90008CCF0014AD6F00148CCE0030AD6E0008B8
+:105CA0008CC4002CA16A000103E00008AD64000C64
+:105CB0008CCD001CAD6D00188CC90014AD690014AA
+:105CC0008CC80024AD6800088CC70020AD67000CAC
+:105CD0008CC200148C8300700043C82B1320000773
+:105CE000000000008CC20014144CFFE4000000000F
+:105CF000354A008003E00008A16A00018C82007030
+:105D00000A0000E6000000009089003027BDFFF87F
+:105D10008FA8001CA3A900008FA300003C0DFF80EA
+:105D200035A2FFFF8CAC002C00625824AFAB000002
+:105D3000A100000400C05821A7A000028D060004A5
+:105D400000A048210167C8218FA5000000805021D4
+:105D50003C18FF7F032C20263C0E00FF2C8C0001FA
+:105D6000370FFFFF35CDFFFF3C02FF0000AFC82417
+:105D700000EDC02400C27824000C1DC00323682558
+:105D800001F87025AD0D0000AD0E00048D24002437
+:105D9000AFAD0000AD0400088D2C00202404FFFFEF
+:105DA000AD0C000C9547003230E6FFFFAD06001049
+:105DB0009145004830A200FF000219C25060000166
+:105DC0008D240034AD0400148D4700388FAA0018CC
+:105DD00027BD0008AD0B0028AD0A0024AD07001C4C
+:105DE000AD00002CAD00001803E00008AD0000205D
+:105DF00027BDFFE0AFB20018AFB10014AFB0001084
+:105E0000AFBF001C9098003000C088213C0D00FFFF
+:105E1000330F007FA0CF0000908E003135ACFFFF24
+:105E20003C0AFF00A0CE000194A6001EA2200004A0
+:105E30008CAB00148E29000400A08021016C282462
+:105E4000012A40240080902101052025A626000279
+:105E5000AE24000426050020262400080E0000922F
+:105E6000240600029247003026050028262400144C
+:105E700000071E000003160324060004044000036C
+:105E80002403FFFF965900323323FFFF0E000092D8
+:105E9000AE230010262400248FBF001C8FB20018F0
+:105EA0008FB100148FB000102405000300003021D2
+:105EB0000A00009C27BD002027BDFFD8AFB1001C01
+:105EC000AFB00018AFBF002090A90030240200013D
+:105ED00000E050213123003F00A040218FB000405E
+:105EE0000080882100C04821106200148FA700386C
+:105EF000240B000500A0202100C02821106B0013F6
+:105F0000020030210E000128000000009225007CD4
+:105F100030A400021080000326030030AE000030E1
+:105F2000260300348FBF00208FB1001C8FB00018F3
+:105F30000060102103E0000827BD00280E0000A724
+:105F4000AFB000100A00016F000000008FA3003CFA
+:105F5000010020210120282101403021AFA30010A1
+:105F60000E0000EEAFB000140A00016F0000000048
+:105F70003C06800034C20E008C4400108F85004423
+:105F8000ACA400208C43001803E00008ACA300245C
+:105F90003C06800034C20E008C4400148F850044FF
+:105FA000ACA400208C43001C03E00008ACA3002438
+:105FB0009382000C1040001B2483000F2404FFF088
+:105FC0000064382410E00019978B00109784000EAD
+:105FD0009389000D3C0A601C0A0001AC0164402357
+:105FE00001037021006428231126000231C2FFFF43
+:105FF00030A2FFFF0047302B50C0000E00E44821C4
+:106000008D4D000C31A3FFFF00036400000C2C0336
+:1060100004A1FFF30000302130637FFF0A0001A4D8
+:106020002406000103E00008000000009784000E31
+:1060300000E448213123FFFF3168FFFF0068382B5F
+:1060400054E0FFF8A783000E938A000D114000056D
+:10605000240F0001006BC023A380000D03E00008A3
+:10606000A798000E006BC023A38F000D03E000086B
+:10607000A798000E03E000080000000027BDFFE81D
+:10608000AFB000103C10800036030140308BFFFFA2
+:1060900093AA002BAFBF0014A46B000436040E00BB
+:1060A0009488001630C600FF8FA90030A46800064F
+:1060B000AC650008A0660012A46A001AAC67002054
+:1060C0008FA5002CA4690018012020210E00019842
+:1060D000AC6500143C021000AE0201788FBF0014C2
+:1060E0008FB0001003E0000827BD00188F85000066
+:1060F0002484000727BDFFF83084FFF83C068000A9
+:1061000094CB008A316AFFFFAFAA00008FA900007C
+:10611000012540232507FFFF30E31FFF0064102BFC
+:106120001440FFF700056882000D288034CC400041
+:1061300000AC102103E0000827BD00088F8200009A
+:106140002486000730C5FFF800A2182130641FFF25
+:1061500003E00008AF8400008F87003C8F84004478
+:1061600027BDFFB0AFB70044AFB40038AFB1002CCB
+:10617000AFBF0048AFB60040AFB5003CAFB300348E
+:10618000AFB20030AFB000283C0B80008C860024FA
+:10619000AD6700808C8A002035670E0035690100EC
+:1061A000ACEA00108C8800248D2500040000B82182
+:1061B000ACE800188CE3001000A688230000A021A2
+:1061C000ACE300148CE20018ACE2001C122000FECC
+:1061D00000E0B021936C0008118000F40000000082
+:1061E000976F001031EEFFFF022E682B15A000EF15
+:1061F00000000000977200103250FFFFAED0000088
+:106200003C0380008C740000329300081260FFFD94
+:106210000000000096D800088EC700043305FFFF79
+:1062200030B5000112A000E4000000000000000DE5
+:1062300030BFA0402419004013F9011B30B4A00066
+:10624000128000DF00000000937300081260000855
+:1062500000000000976D001031ACFFFF00EC202B18
+:106260001080000330AE004011C000D500000000D7
+:10627000A7850040AF8700389363000802202821DB
+:10628000AFB10020146000F527B40020AF60000C0F
+:10629000978F004031F140001620000224030016C1
+:1062A0002403000E24054007A363000AAF65001411
+:1062B000938A00428F70001431550001001512407E
+:1062C00002024825AF690014979F00408F780014A0
+:1062D00033F9001003194025AF680014979200406D
+:1062E0003247000810E0016E000000008F670014C4
+:1062F0003C1210003C11800000F27825AF6F0014B2
+:1063000036230E00946E000A3C0D81002406000E18
+:1063100031CCFFFF018D2025AF640004A36600028D
+:106320009373000A3406FFFC266B0004A36B000A7B
+:1063300097980040330820001100015F0000000022
+:106340003C05800034A90E00979900409538000C58
+:1063500097870040001940423312C0003103000308
+:1063600000127B0330F11000006F682500117203EA
+:1063700001AE6025000C20C0A76400129793004076
+:10638000936A000A001359823175003C02AA102159
+:106390002450003CA3700009953F000C33F93FFFE7
+:1063A000A779001097700012936900090130F82155
+:1063B00027E5000230B900070019C02333080007A1
+:1063C000A368000B9371000997720012976F001079
+:1063D000322700FF8F910038978D004000F218217E
+:1063E000006F702101C6602131A6004010C0000579
+:1063F0003185FFFF00B1102B3C12800010400017C8
+:10640000000098210225A82B56A0013E8FA5002050
+:106410003C048000348A0E008D5300143C0680003A
+:10642000AD5300108D4B001CAD4B0018AD45000066
+:106430008CCD000031AC00081180FFFD34CE0E0081
+:1064400095C3000800A0882100009021A783004088
+:106450008DC6000424130001AF860038976F00102A
+:1064600031F5FFFF8E9F000003F1282310A0011FCC
+:10647000AE85000093620008144000DD00000000BB
+:106480000E0001E7240400108F90004800402821EE
+:106490003C023200320600FF000654000142F8259B
+:1064A00026090001AF890048ACBF000093790009BC
+:1064B00097780012936F000A332800FF3303FFFF21
+:1064C0000103382100076C0031EE00FF01AE6025AA
+:1064D000ACAC00048F840048978B0040316A2000E8
+:1064E0001140010AACA4000897640012308BFFFF32
+:1064F00006400108ACAB000C978E004031C5000887
+:1065000014A0000226280006262800023C1F800056
+:1065100037E70E0094F900148CE5001C8F67000427
+:10652000937800023324FFFF330300FFAFA3001072
+:106530008F6F0014AFA800180E0001CBAFAF00148E
+:10654000240400100E0001FB000000008E920000E9
+:1065500016400005000000008F7800142403FFBFE0
+:106560000303A024AF7400148F67000C00F5C8214A
+:10657000AF79000C9375000816A000080000000019
+:1065800012600006000000008F6800143C0AEFFF54
+:106590003549FFFE0109F824AF7F0014A3730008FA
+:1065A0008FA500200A00034F02202021AED1000059
+:1065B0000A00022D3C03800014E0FF1E30BFA04003
+:1065C0000E0001900000A0212E9100010237B0259D
+:1065D00012C000188FBF00488F87003C24170F009F
+:1065E00010F700D43C0680008CD901780720FFFE0C
+:1065F000241F0F0010FF00F634CA0E008D56001441
+:1066000034C7014024080240ACF600048D49001C48
+:106610003C141000ACE90008A0E00012A4E0001A4D
+:10662000ACE00020A4E00018ACE80014ACD4017881
+:106630008FBF00488FB700448FB600408FB5003C35
+:106640008FB400388FB300348FB200308FB1002C7C
+:106650008FB0002803E0000827BD00508F9100385C
+:10666000978800403C1280000220A821310700409A
+:1066700014E0FF7C00009821977900108F92003879
+:106680003338FFFF131200A8000020210080A02152
+:10669000108000F300A088211620FECE000000002C
+:1066A0000A00031F2E9100013C0380008C620178D8
+:1066B0000440FFFE240808008F860000AC680178C3
+:1066C0003C038000946D008A31ACFFFF01865823A3
+:1066D000256AFFFF31441FFF2C8900081520FFF9B0
+:1066E000000000008F8F0048347040008F83003C12
+:1066F00000E0A021240E0F0025E70001AF8700482D
+:1067000000D03021023488233C08800031F500FF9E
+:10671000106E000524070001939800423313000116
+:106720000013924036470001001524003C0A010086
+:10673000008A4825ACC900008F82004830BF00366F
+:1067400030B90008ACC200041320009900FF98255E
+:1067500035120E009650000A8F8700003C0F810012
+:106760003203FFFF24ED000835060140006F60256D
+:106770003C0E100031AB1FFF269200062405000ED0
+:10678000ACCC0020026E9825A4C5001AAF8B000087
+:10679000A4D20018162000083C1080008F89003C0D
+:1067A00024020F005122000224170001367300401A
+:1067B0000E0001883C10800036060E008CCB0014C1
+:1067C000360A014002402021AD4B00048CC5001C5C
+:1067D000AD450008A1550012AD5300140E000198FC
+:1067E0003C151000AE1501780A00035200000000AD
+:1067F000936F0009976E0012936D000B31E500FF57
+:1068000000AE202131AC00FF008C80212602000A5E
+:106810003050FFFF0E0001E7020020218F86004864
+:106820003C0341003C05800024CB0001AF8B0048B5
+:10683000936A00099769001230C600FF315F00FFBC
+:106840003128FFFF03E8382124F900020006C400C4
+:106850000319782501E37025AC4E00008F6D000C04
+:1068600034A40E00948B001401B26025AC4C0004DB
+:106870008C85001C8F670004936A00023164FFFF5F
+:10688000314900FFAFA900108F680014AFB10018A4
+:106890000E0001CBAFA800140A0002FD0200202167
+:1068A000AF600004A3600002979800403308200006
+:1068B0001500FEA300003021A7600012978400405D
+:1068C000936B000A3C10800030931F00001351832B
+:1068D000014BA82126A20028A362000936090E0058
+:1068E000953F000C0A000295A77F00108F700014DE
+:1068F000360900400E000188AF6900140A0002C981
+:10690000000000000A00034F000020210641FEFAAB
+:10691000ACA0000C8CAC000C3C0D8000018D9025CF
+:106920000A0002EAACB2000C000090210A0002C585
+:1069300024130001128000073C028000344B0E003B
+:106940009566000830D30040126000490000000046
+:106950003C0680008CD001780600FFFE34C50E0096
+:1069600094B500103C03050034CC014032B8FFFF61
+:1069700003039025AD92000C8CAF0014240D200071
+:106980003C041000AD8F00048CAE001CAD8E0008DE
+:10699000A1800012A580001AAD800020A5800018FB
+:1069A000AD8D0014ACC401780A0003263C068000BB
+:1069B0008F9F0000351801402692000227F9000839
+:1069C00033281FFFA71200180A000391AF880000A8
+:1069D0003C02800034450140ACA0000C1280001B3A
+:1069E00034530E0034510E008E370010ACB7000443
+:1069F0008E2400183C0B8000ACA4000835700140C8
+:106A000024040040A20000128FBF0048A600001A14
+:106A10008FB70044AE0000208FB60040A6000018DB
+:106A20008FB5003CAE0400148FB400388FB300342F
+:106A30008FB200308FB1002C8FB000283C021000C4
+:106A400027BD005003E00008AD6201788E66001497
+:106A5000ACA600048E64001C0A00042A3C0B8000D3
+:106A60000E0001902E9100010A0003200237B0258C
+:106A7000000000000000000D000000002400036979
+:106A80000A0004013C06800027BDFFD8AFBF0020EC
+:106A90003C0980003C1F20FFAFB200183C0760009B
+:106AA00035320E002402001037F9FFFDACE2300849
+:106AB000AFB3001CAFB10014AFB00010AE5900006E
+:106AC00000000000000000000000000000000000C6
+:106AD000000000003C1800FF3713FFFDAE5300001C
+:106AE0003C0B60048D7050002411FF7F3C0E0002AF
+:106AF0000211782435EC380C35CD0109ACED4C1879
+:106B0000240A0009AD6C50008CE80438AD2A000856
+:106B1000AD2000148CE54C1C3106FFFF38C42F71EA
+:106B200000051E023062000F2486C0B3104000072B
+:106B3000AF8200088CE54C1C3C09001F3528FC0086
+:106B400000A81824000321C2AF8400048CF10808B7
+:106B50003C0F57092412F0000232702435F0001067
+:106B600001D0602601CF68262DAA00012D8B0001DF
+:106B7000014B382550E00009A380000C3C1F601C2D
+:106B80008FF8000824190001A399000C33137C002E
+:106B9000A7930010A780000EA380000DAF800048CF
+:106BA00014C00003AF8000003C066000ACC0442C61
+:106BB0000E0005B93C1080000E000F2436110100B4
+:106BC0003C12080026523DF03C13080026733E702C
+:106BD0008E03000038640001308200011440FFFC85
+:106BE0003C0B800A8E2600002407FF8024C9024047
+:106BF000312A007F014B402101272824AE060020C6
+:106C0000AF880044AE0500243C048000AF86003C01
+:106C10008C8C01780580FFFE24180800922F000854
+:106C2000AC980178A38F0042938E004231CD0001D1
+:106C300011A0000F24050D0024DFF8002FF9030137
+:106C40001320001C000629C224A4FFF000041042F7
+:106C5000000231400E00020200D2D8213C02400066
+:106C60003C068000ACC201380A0004A0000000000D
+:106C700010C50023240D0F0010CD00273C1F8008F5
+:106C800037F9008093380000240E0050330F00FFC6
+:106C900015EEFFF33C0240000E000A400000000029
+:106CA0003C0240003C068000ACC201380A0004A04F
+:106CB000000000008F83000400A3402B1500000B90
+:106CC0008F8B0008006B50212547FFFF00E5482B04
+:106CD0001520000600A36023000C19400E000202DC
+:106CE0000073D8210A0004C43C0240000000000DDB
+:106CF0000E000202000000000A0004C43C02400032
+:106D00003C1B0800277B3F700E00020200000000C1
+:106D10000A0004C43C0240003C1B0800277B3F9053
+:106D20000E000202000000000A0004C43C02400001
+:106D30003C0660043C09080025290104ACC9502C1C
+:106D40008CC850003C0580003C02000235070080E2
+:106D5000ACC750003C040800248415A43C03080080
+:106D60002463155CACA50008ACA2000C3C01080033
+:106D7000AC243D803C010800AC233D8403E00008C6
+:106D80002402000100A030213C1C0800279C3D8803
+:106D90003C0C04003C0B0002008B3826008C402683
+:106DA0002CE200010007502B2D050001000A48804D
+:106DB0003C03080024633D80004520250123182161
+:106DC0001080000300001021AC66000024020001C6
+:106DD00003E00008000000003C1C0800279C3D88E0
+:106DE0003C0B04003C0A0002008A3026008B382647
+:106DF0002CC200010006482B2CE500010009408050
+:106E00003C03080024633D80004520250103182130
+:106E100010800005000010213C0C0800258C155C3A
+:106E2000AC6C00002402000103E000080000000038
+:106E30003C0900023C0804000088302600893826FE
+:106E40002CC30001008028212CE4000100831025C0
+:106E50001040000B000030213C1C0800279C3D889E
+:106E60003C0A80008D4E00082406000101CA6825F6
+:106E7000AD4D00088D4C000C01855825AD4B000C24
+:106E800003E0000800C010213C1C0800279C3D883E
+:106E90003C0580008CA6000C000420272402000181
+:106EA00000C4182403E00008ACA3000C3C0200025C
+:106EB0001082000B3C0560003C07040010870003B3
+:106EC0000000000003E00008000000008CA908D0CA
+:106ED000240AFFFD012A402403E00008ACA808D0E2
+:106EE0008CA408D02406FFFE0086182403E00008C6
+:106EF000ACA308D03C05601A34A600108CC30080F7
+:106F000027BDFFF88CC50084AFA3000093A4000048
+:106F10002402000110820003AFA5000403E0000872
+:106F200027BD000893A7000114E0001497AC0002ED
+:106F300097B800023C0F8000330EFFFC01CF6821A0
+:106F4000ADA50000A3A000003C0660008CC708D0DF
+:106F50002408FFFE3C04601A00E82824ACC508D0D1
+:106F60008FA300048FA200003499001027BD0008F1
+:106F7000AF22008003E00008AF2300843C0B8000B8
+:106F8000318AFFFC014B48218D2800000A00057D55
+:106F9000AFA8000427BDFFE8AFBF00103C1C0800ED
+:106FA000279C3D883C0580008CA4000C8CA200042A
+:106FB0003C0300020044282410A0000A00A3182467
+:106FC0003C0604003C0400021460000900A61024E2
+:106FD0001440000F3C0404000000000D3C1C08009D
+:106FE000279C3D888FBF001003E0000827BD0018D4
+:106FF0003C0208008C423D800040F809000000007F
+:107000003C1C0800279C3D880A0005A68FBF001085
+:107010003C0208008C423D840040F809000000005A
+:107020000A0005AC00000000000411C003E00008E5
+:10703000244202403C04080024843FD42405001A62
+:107040000A00009C0000302127BDFFE0AFB0001017
+:107050003C108000AFBF0018AFB100143611010022
+:10706000922200090E0005B63044007F8E3F0000DA
+:107070008F89003C3C0F008003E26021258800409E
+:107080000049F821240DFF80310E007831980078F6
+:1070900035F9000135F100020319382501D14825E1
+:1070A000010D302403ED5824018D2824240A0040CA
+:1070B00024040080240300C0AE0B0024AE0008109E
+:1070C000AE0A0814AE040818AE03081CAE05080486
+:1070D000AE070820AE060808AE09082436090900E4
+:1070E0009539000C3605098033ED007F3338FFFFFA
+:1070F000001889C0AE110800AE0F0828952C000CAE
+:107100008FBF00188FB10014318BFFFF000B51C0EF
+:10711000AE0A002C8CA400508FB000108CA3003C51
+:107120008D2700048CA8001C8CA600383C0E800A19
+:1071300001AE102127BD0020AF820044AF84005073
+:10714000AF830054AF87004CAF88005C03E00008B9
+:10715000AF8600603C09080091293FF924A800028D
+:107160003C05110000093C0000E8302500C5182549
+:1071700024820008AC83000003E00008AC80000417
+:107180003C098000352309009128010B906A001109
+:107190002402002800804821314700FF00A0702110
+:1071A00000C068213108004010E20002340C86DD86
+:1071B000240C08003C0A800035420A9A94470000DB
+:1071C000354B0A9C35460AA030F9FFFFAD39000067
+:1071D0008D780000354B0A8024040001AD3800048E
+:1071E0008CCF0000AD2F00089165001930A300037B
+:1071F0001064009A28640002148000B9240500027B
+:10720000106500A8240F0003106F00BE35450AA4C6
+:10721000240A0800118A004D0000000051000042BD
+:107220003C0B80003C04800034830900906700120E
+:1072300030E200FF004D7821000FC88027240001B4
+:107240003C0A8000354F090091E50019354C098052
+:107250008D87002830A300FF000315000047582544
+:107260000004C4003C19600001793025370806FF8E
+:10727000AD260000AD2800048DEA002C252800284A
+:10728000AD2A00088DEC0030AD2C000C8DE50034EB
+:10729000AD2500108DE40038AD2400148DE3001CF2
+:1072A000AD2300188DE70020AD27001C8DE20024DF
+:1072B000AD2200208DF90028AD3900243C09800062
+:1072C0003526093C8CCF0000352A0100AD0E0004A4
+:1072D000AD0F00008D4E000C3523090035250980C7
+:1072E000AD0E0008906C00128D47000C8CB9003474
+:1072F0003C18080093183FF8318200FF004D5821D8
+:1073000003277823000B37000018240000C47025E1
+:1073100031E9FFFC01C9682525020014AD0D000C00
+:1073200003E00008AD000010357809009306001254
+:107330003C05080094A53FE830C800FF010D50212E
+:10734000000A60800A00063C0185202115000060CB
+:10735000000000003C08080095083FEE3C060800CD
+:1073600094C63FE8010610213C0B800035790900E6
+:1073700093380011932A001935660A80330800FFFC
+:1073800094CF002A00086082314500FF978A005898
+:10739000000C1E00000524003047FFFF006410258C
+:1073A0000047C02501EA30213C0B4000030B40257B
+:1073B00000066400AD280000AD2C000493250018E1
+:1073C0003C0300062528001400053E0000E31025BC
+:1073D000AD2200088F24002C254F000131EB7FFFE8
+:1073E000AD24000C8F38001CA78B0058AD3800105E
+:1073F0003C0980003526093C8CCF0000352A01006D
+:10740000AD0E0004AD0F00008D4E000C35230900B9
+:1074100035250980AD0E0008906C00128D47000CD8
+:107420008CB900343C18080093183FF8318200FFF3
+:10743000004D582103277823000B37000018240043
+:1074400000C4702531E9FFFC01C96825250200143C
+:10745000AD0D000C03E00008AD0000103C02080078
+:1074600094423FF23C05080094A53FE835440AA445
+:107470003C07080094E73FE4948B00000045C821D6
+:107480000327C023000B1C002706FFF200665025CF
+:10749000AD2A000CAD200010AD2C00140A000630FF
+:1074A00025290018354F0AA495E5000095640028A9
+:1074B0000005140000043C003459810000EC5825FC
+:1074C000AD39000CAD2B00100A0006302529001440
+:1074D0003C0C0800958C3FEE0A00068625820001D0
+:1074E0005460FF4C240A080035580AA4970600008F
+:1074F00000061C00006C5025AD2A000C0A00063066
+:10750000252900103C03080094633FF23C07080063
+:1075100094E73FE83C0F080095EF3FE494A4000097
+:107520009579002800671021004F582300041C00A3
+:10753000001934002578FFEE00D87825346A8100E0
+:10754000AD2A000CAD2F0010AD200014AD2C00189A
+:107550000A0006302529001C03E00008240207D099
+:1075600027BDFFE0AFB20018AFB10014AFB00010FC
+:10757000AFBF001C0E00007C008088218F88005463
+:107580008F87004C3C05800834B20080011128210F
+:107590003C10800024020080240300C000A72023A8
+:1075A000AE0208183C068008AE03081C18800004D0
+:1075B000AF850054ACC500048CC90004AF89004CF1
+:1075C00012200009360409800E00070200000000A6
+:1075D000924C00278E0B007401825004014B302125
+:1075E000AE46000C360409808C8E001C8F8F005C28
+:1075F00001CF682319A000048FBF001C8C90001CD1
+:10760000AF90005C8FBF001C8FB200188FB10014C8
+:107610008FB000100A00007E27BD00208F8600502A
+:107620008F8300548F82004C3C05800834A4008076
+:10763000AC860050AC83003C03E00008ACA2000420
+:107640003C0308008C63005427BDFFF8308400FF22
+:107650002462000130A500FF3C010800AC22005468
+:1076600030C600FF3C0780008CE801780500FFFE73
+:107670003C0C7FFFA3A400038FAA0000358BFFFF03
+:10768000014B4824000627C001244025AFA8000074
+:1076900034E201009043000AA3A000023C1980FFDD
+:1076A000A3A300018FAF000030AE007F3738FFFF8B
+:1076B00001F86024000E6E003C0A002034E5014011
+:1076C000018D5825354920002406FF803C04100018
+:1076D00027BD0008ACAB000CACA90014A4A0001896
+:1076E000A0A6001203E00008ACE40178308800FF97
+:1076F00030A700FF3C0380008C6201780440FFFE4D
+:107700003C0C8000358A0A008D4B002035840140F6
+:1077100035850980AC8B00048D4900240007302B8F
+:1077200000061540AC890008A088001090A3004C0A
+:10773000A083002D03E00008A480001827BDFFE807
+:10774000308400FFAFBF00100E00076730A500FFB8
+:107750008F8300548FBF00103C06800034C5014069
+:10776000344700402404FF903C02100027BD00185D
+:10777000ACA3000CA0A40012ACA7001403E0000806
+:10778000ACC2017827BDFFE03C088008AFBF001CF9
+:10779000AFB20018AFB10014AFB0001035100080C8
+:1077A0008E0600183C078000309200FF00C720259D
+:1077B000AE0400180E00007C30B100FF92030005FB
+:1077C000346200080E00007EA20200050240202163
+:1077D0000E00077B02202821024020218FBF001CC1
+:1077E0008FB200188FB100148FB00010240500056F
+:1077F000240600010A00073C27BD00203C0580004C
+:1078000034A309809066000830C200081040000FC1
+:107810003C0A01013549080AAC8900008CA80074B3
+:10782000AC8800043C07080090E73FF830E5001002
+:1078300050A00008AC8000083C0D800835AC0080EA
+:107840008D8B0058AC8B00082484000C03E00008EA
+:10785000008010210A0007BF2484000C27BDFFE828
+:107860003C098000AFB00010AFBF0014352609807E
+:1078700090C800092402000600A05821310300FF2F
+:107880003527090000808021240500041062007B58
+:107890002408000294CF005C3C0E020431EDFFFF8F
+:1078A00001AE6025AE0C000090CA000831440020F3
+:1078B000108000080000000090C2004E3C1F010331
+:1078C00037F90300305800FF03193025240500085C
+:1078D000AE06000490F9001190E6001290E4001149
+:1078E000333800FF0018708230CF00FF01CF5021E5
+:1078F000014B6821308900FF31AAFFFF392300289E
+:10790000000A60801460002C020C482390E40012EE
+:107910003C198000372F0100308C00FF018B1821AB
+:10792000000310800045F821001F8400360706FF81
+:10793000AD270004373F090093EC001193EE0012CD
+:10794000372609800005C0828DE4000C8CC5003408
+:1079500031CD00FF01AB10210058182100A4F823FD
+:107960000008840000033F0000F0302533F9FFFFDA
+:10797000318F00FC00D970250158202101E96821D0
+:1079800000045080ADAE000C0E00007C012A802166
+:107990003C088008240B0004350500800E00007EA2
+:1079A000A0AB0009020010218FBF00148FB000109F
+:1079B00003E0000827BD001890EC001190E30019C7
+:1079C0003C18080097183FEE318200FF0002F88251
+:1079D000307000FF001FCE0000103C000327302550
+:1079E00000D870253C0F400001CF68253C1980006D
+:1079F000AD2D0000373F090093EC001193EE00120B
+:107A0000372F0100372609800005C0828DE4000C65
+:107A10008CC5003431CD00FF01AB10210058182176
+:107A200000A4F8230008840000033F0000F0302584
+:107A300033F9FFFF318F00FC00D970250158202158
+:107A400001E9682100045080ADAE000C0E00007CFE
+:107A5000012A80213C088008240B000435050080A1
+:107A60000E00007EA0AB0009020010218FBF0014A1
+:107A70008FB0001003E0000827BD00180A0007D1EE
+:107A80002408001227BDFFD03C038000AFB60028B9
+:107A9000AFB50024AFB40020AFB10014AFBF002CCD
+:107AA000AFB3001CAFB20018AFB0001034670100D4
+:107AB00090E6000B309400FF30B500FF30C200307C
+:107AC0000000B02110400099000088213464098032
+:107AD0009088000800082E0000051E03046000C006
+:107AE000240400048F8600543C010800A0243FF8C1
+:107AF0003C0C8000AD8000483C048000348E0100C6
+:107B000091CD000B31A5002010A000073C0780009C
+:107B100034930980927200080012860000107E03E0
+:107B200005E000C43C1F800834EC0100918A000B82
+:107B300034EB098091690008314400400004402B77
+:107B40003123000800C898231460000224120003A7
+:107B5000000090213C10800036180A80360409008D
+:107B6000970E002C90830011908900129305001845
+:107B7000307F00FF312800FF024810210002C8803A
+:107B8000930D0018033F782101F1302130B100FF3F
+:107B900000D11821A78E00583C010800A4263FEE12
+:107BA0003C010800A4233FF015A0000200000000E3
+:107BB0000000000D920B010B3065FFFF3C01080037
+:107BC000A4233FF2316A00403C010800A4203FE8B2
+:107BD0003C010800A4203FE41140000224A4000A54
+:107BE00024A4000B3091FFFF0E0001E702202021AA
+:107BF0009206010B3C0C0800958C3FF200402021BE
+:107C00000006698231A700010E00060101872821C4
+:107C100000402021026028210E00060C0240302185
+:107C20000E0007AB0040202116C000690040202153
+:107C30009212010B3256004012C000053C0500FFB5
+:107C40008C93000034AEFFFF026E8024AC900000E5
+:107C50000E0001FB022020213C0F080091EF3FF8AD
+:107C600031F10003122000163C1380088F8200546B
+:107C70003C09800835280080245F0001AD1F003CCE
+:107C80003C0580088CB9000403E02021033FC02399
+:107C90001B000002AF9F00548CA400040E000702DA
+:107CA000ACA400043C0780008CEB00743C0480080A
+:107CB00034830080004B5021AC6A000C3C138008D8
+:107CC000367000800280202102A02821A200006BD3
+:107CD0000E0007673C1480008F920054368C0140E0
+:107CE000AD92000C8F8600483C151000344D000604
+:107CF00024D60001AF9600488FBF002CA186001249
+:107D00008FB60028AD8D00148FB3001CAE9501789E
+:107D10008FB200188FB500248FB400208FB10014EB
+:107D20008FB0001003E0000827BD003034640980E4
+:107D3000908F0008000F7600000E6E0305A0003340
+:107D4000347F090093F8001B241900103C0108003F
+:107D5000A0393FF8331300021260FF678F8600548A
+:107D60008F8200601446FF653C0480000E00007C9A
+:107D7000000000003C0480083485008090A80009C1
+:107D800024060016310300FF1066000D00000000FD
+:107D900090AB00093C07080090E73FF82409000871
+:107DA000316400FF34EA00013C010800A02A3FF8DA
+:107DB0001089002F240C000A108C00282402000CCB
+:107DC0000E00007E000000000A00086A8F86005442
+:107DD0000E0007C3024028210A0008B800402021F5
+:107DE0003C0B8008356A00808D4600548CE9000CFD
+:107DF0001120FF3DAF860054240700143C01080009
+:107E0000A0273FF80A0008693C0C80009091000808
+:107E1000241200023C010800A0323FF8323000205A
+:107E20001200000B241600018F8600540A00086A15
+:107E30002411000837F800808F020038AFE20004F8
+:107E40008FF90004AF19003C0A0008763C07800057
+:107E50008F8600540A00086A24110004A0A20009B9
+:107E60000E00007E000000000A00086A8F860054A1
+:107E7000240200140A000944A0A2000927BDFFE85B
+:107E8000AFB000103C108000AFBF001436020100FC
+:107E9000904400090E000767240500013C04800897
+:107EA0009099000E34830080909F000F906F002601
+:107EB0009089000A33F800FF00196E000018740062
+:107EC00031EC00FF01AE5025000C5A00014B382563
+:107ED000312800FF360301403445600000E83025BA
+:107EE0002402FF813C041000AC66000C8FBF00141C
+:107EF000AC650014A0620012AE0401788FB00010CF
+:107F000003E0000827BD001827BDFFE8308400FF0C
+:107F1000AFBF00100E00076730A500FF3C058000D2
+:107F200034A40140344700402406FF92AC8700147B
+:107F3000A08600128F8300548FBF00103C021000F7
+:107F400027BD0018AC83000C03E00008ACA2017848
+:107F500027BDFFD8AFB00010308400FF30B000FF65
+:107F60003C058000AFB10014AFBF0020AFB3001CD0
+:107F7000AFB20018000410C234A6010032030002A0
+:107F8000305100011460000790D200093C098008BC
+:107F900035330080926800053107000810E0000CBE
+:107FA000308A0010024020210E00078D0220282177
+:107FB000240200018FBF00208FB3001C8FB2001875
+:107FC0008FB100148FB0001003E0000827BD002817
+:107FD0001540003434A50A008CB800248CAF00088A
+:107FE000130F004B000038213C0D800835B3008092
+:107FF000926C006824060002318B00FF1166008439
+:108000003C06800034C201009263004C9059000984
+:10801000307F00FF53F900043213007C10E0006948
+:10802000000000003213007C5660005C02402021FA
+:1080300016200009320D00013C0C8000358401003F
+:10804000358B0A008D6500248C86000414A6FFD9A8
+:1080500000001021320D000111A0000E024020216D
+:108060003C188000371001008E0F000C8F8E0050DE
+:1080700011EE0008000000000E00084D022028212B
+:108080008E19000C3C1F800837F00080AE1900509C
+:10809000024020210E00077B022028210A000999B6
+:1080A000240200013C0508008CA5006424A4000102
+:1080B0003C010800AC2400641600000D0000000024
+:1080C000022028210E00077B02402021926E0068CA
+:1080D000240C000231CD00FF11AC0022024020210F
+:1080E0000E00094B000000000A000999240200015B
+:1080F0000E00007024040001926B0025020B302555
+:108100000E00007EA26600250A0009DD022028215B
+:108110008E6200188CDF00048CB9002400021E025D
+:1081200017F9FFB13065007F9268004C26440001CA
+:108130003093007F12650040310300FF1464FFABF1
+:108140003C0D80082647000130F1007F30E200FF3F
+:108150001225000B24070001004090210A0009A607
+:1081600024110001240500040E00073C2406000130
+:108170000E00094B000000000A00099924020001CA
+:108180002405FF800245202400859026324200FF0E
+:10819000004090210A0009A6241100010E00084D9C
+:1081A000022028213207003010E0FFA132100082A7
+:1081B000024020210E00078D022028210A00099983
+:1081C000240200018E69001802402021022028218B
+:1081D000012640250E00096EAE6800189264004C1E
+:1081E00024050003240600010E00073C308400FF34
+:1081F0000E00007024040001927100250211502528
+:108200000E00007EA26A00250A00099924020001DE
+:108210008E6F00183C1880000240202101F8702564
+:10822000022028210E00077BAE6E00189264004CDD
+:108230000A000A2524050004324A008039490080DA
+:108240001469FF6A3C0D80080A0009FE26470001F8
+:1082500027BDFFC0AFB000183C108000AFBF003892
+:10826000AFB70034AFB60030AFB5002CAFB40028C4
+:10827000AFB30024AFB200200E0005BEAFB1001CAA
+:10828000360201009045000B0E0009809044000862
+:10829000144000E78FBF00383C0880083507008095
+:1082A000A0E0006B3606098090C500002403005052
+:1082B0003C17080026F73FB030A400FF3C1308002D
+:1082C00026733FC0108300033C1080000000B821DB
+:1082D00000009821241F00103611010036120A00F8
+:1082E000361509808E5800248E3400048EAF00208D
+:1082F0008F8C00543C010800A03F3FF836190A80DB
+:10830000972B002C8EF60000932A001802987023F9
+:1083100001EC68233C010800AC2E3FD43C0108006E
+:10832000AC2D3FD83C010800AC2C3FFCA78B00587B
+:1083300002C0F809315400FF30490002152000E95D
+:1083400030420001504000C49227000992A9000861
+:108350003128000815000002241500030000A821A0
+:108360003C0A80003543090035440A008C8D002406
+:108370009072001190700012907F0011325900FF2E
+:10838000321100FF02B110210002C08033EF00FF64
+:108390000319B021028F702102D4602125CB001077
+:1083A0003C010800A4363FEE3C010800AC2D400023
+:1083B0003C010800A42C3FF03C010800A42B3FEC3A
+:1083C000355601003554098035510E008F87005411
+:1083D0008F89005C8E850020240800060127302349
+:1083E0003C010800AC283FF400A7282304C000B5D6
+:1083F0000000902104A000B300C5502B114000B52F
+:10840000000000003C010800AC263FD88E6200004E
+:108410000040F809000000003046000214C000745B
+:1084200000408021304B0001556000118E62000435
+:108430003C0D08008DAD3FDC3C0EC0003C048000CC
+:1084400001AE6025AE2C00008C980000330F0008B0
+:1084500011E0FFFD00000000963F0008241200011B
+:10846000A79F00408E390004AF9900388E62000447
+:108470000040F809000000000202802532030002DB
+:10848000146000B3000000003C09080095293FE497
+:108490003C06080094C63FF03C0A0800954A3FE6B7
+:1084A0003C0708008CE73FDC012670213C030800F4
+:1084B0008C6340003C08080095083FFA01CA20215F
+:1084C0008ED9000C00E92821249F000200A8782101
+:1084D0000067C02133E4FFFFAF9900503C01080062
+:1084E000AC3840003C010800A42F3FE83C010800E4
+:1084F000A42E3FF20E0001E7000000008F8D00481F
+:10850000004020213C010800A02D3FF98E620008A8
+:1085100025AC0001AF8C00480040F80900000000C5
+:108520008F85005402A030210E00060C004020214F
+:108530000E0007AB004020218E6B000C0160F80993
+:10854000004020213C0A0800954A3FF23C06080002
+:1085500094C63FE601464821252800020E0001FB93
+:108560003104FFFF3C0508008CA53FD43C07080000
+:108570008CE73FDC00A720233C010800AC243FD45B
+:1085800014800006000000003C0208008C423FF40A
+:10859000344B00403C010800AC2B3FF41240004338
+:1085A0008F8E00448E2D00108F920044AE4D00201F
+:1085B0008E2C0018AE4C00243C04080094843FE844
+:1085C0000E000704000000008F9F00548E6700100B
+:1085D0003C010800AC3F3FFC00E0F809000000004F
+:1085E0003C1908008F393FD41720FF798F8700543A
+:1085F000979300583C11800E321601000E0007338D
+:10860000A633002C16C00045320300105460004C05
+:108610008EE50004320800405500001D8EF0000871
+:108620008EE4000C0080F809000000008FBF0038C5
+:108630008FB700348FB600308FB5002C8FB4002870
+:108640008FB300248FB200208FB1001C8FB00018B0
+:1086500003E0000827BD00408F86003C36110E0065
+:1086600000072E0000A62025AE0400808E430020C7
+:108670008E500024AFA30010AE2300148FB2001060
+:10868000AE320010AE30001C0A000A7FAE30001877
+:108690000200F809000000008EE4000C0080F809D8
+:1086A000000000000A000B388FBF003824180001BA
+:1086B000240F0001A5C00020A5D800220A000B1A33
+:1086C000ADCF00243C010800AC203FD80A000AB01E
+:1086D0008E6200003C010800AC253FD80A000AB0B9
+:1086E0008E620000922400090E00077B0000282102
+:1086F0008FBF00388FB700348FB600308FB5002C95
+:108700008FB400288FB300248FB200208FB1001CDB
+:108710008FB0001803E0000827BD00403C14800023
+:1087200092950109000028210E00084D32A400FF97
+:10873000320300105060FFB8320800408EE500049C
+:1087400000A0F809000000000A000B3232080040C7
+:108750005240FFA8979300588E3400148F93004422
+:10876000AE7400208E35001CAE7500240A000B2963
+:10877000979300588F8200140004218003E00008C2
+:10878000008210213C07800834E200809043006999
+:1087900000804021106000093C0401003C070800F3
+:1087A0008CE73FFC8F83003000E320230480000827
+:1087B0009389001C14E300030100202103E000085A
+:1087C000008010213C04010003E00008008010211B
+:1087D0001120000B006738233C0D800035AC098068
+:1087E000918B007C316A0002114000202409003482
+:1087F00000E9702B15C0FFF10100202100E93823AA
+:108800002403FFFC00A3C82400E3C02400F9782B54
+:1088100015E0FFEA0308202130C400030004102300
+:1088200014C00014304900030000302100A9782151
+:1088300001E6702100EE682B11A0FFE03C0401006E
+:108840002D3800010006C82B0105482103193824E2
+:1088500014E0FFDA2524FFFC2402FFFC00A2182408
+:108860000068202103E00008008010210A000BA806
+:10887000240900303C0C80003586098090CB007CB8
+:10888000316A00041540FFE9240600040A000BB712
+:10889000000030213C0308008C63005C8F820018CC
+:1088A00027BDFFE0AFBF0018AFB100141062000594
+:1088B000AFB00010000329C024A40280AF840014CC
+:1088C000AF8300183C10800036020A009445003245
+:1088D000361101000E000B8930A43FFF8E240000EA
+:1088E000241FFF803C1100800082C021031F6024F0
+:1088F0003309007F000CC94003294025330E00785E
+:10890000362F00033C0D1000010D502501CF5825D6
+:10891000AE0C002836080980AE0C080CAE0B082CF3
+:10892000AE0A0830910300693C06800C012638210C
+:1089300010600006AF8700348D09003C8D03006C89
+:108940000123382318E00082000000003C0B80085F
+:10895000356A00803C108000A1400069360609801D
+:108960008CC200383C06800034C50A0090A8003C48
+:10897000310C00201180001AAF820030240D00015C
+:108980003C0E800035D10A00A38D001CAF8000246E
+:108990008E2400248F850024240D0008AF80002041
+:1089A000AF8000283C010800A42D3FE63C010800F0
+:1089B000A4203FFA0E000B8D000030219228003CCD
+:1089C0008FBF00188FB100148FB0001000086142F3
+:1089D000AF82002C27BD002003E000083182000197
+:1089E00090B80032240E0001330F00FF000F2182E7
+:1089F000108E0041241900021099006434C40AC08A
+:108A00003C03800034640A008C8F002415E0001EB3
+:108A100034660900909F00302418000533F9003FA8
+:108A20001338004E240300018F860020A383001C0E
+:108A3000AF860028AF8600243C0E800035D10A00A6
+:108A40008E2400248F850024240D00083C0108009A
+:108A5000A42D3FE63C010800A4203FFA0E000B8D38
+:108A6000000000009228003C8FBF00188FB1001456
+:108A70008FB0001000086142AF82002C27BD00209B
+:108A800003E00008318200018C8A00088C8B0024EE
+:108A90008CD000643C0E800035D10A00014B2823A5
+:108AA000AF900024A380001CAF8500288E240024F2
+:108AB0008F8600208F850024240D00083C010800CB
+:108AC000A42D3FE63C010800A4203FFA0E000B8DC8
+:108AD000000000009228003C8FBF00188FB10014E6
+:108AE0008FB0001000086142AF82002C27BD00202B
+:108AF00003E000083182000190A200303051003FB5
+:108B00005224002834C50AC08CB00024160000226C
+:108B100034CB09008CA600483C0A7FFF3545FFFF97
+:108B200000C510243C0E8000AF82002035C509002E
+:108B30008F8800208CAD0060010D602B1580000235
+:108B4000010020218CA400600A000C2CAF840020BE
+:108B50008D02006C0A000C063C0680008C820048E6
+:108B60008F8600203C097FFF3527FFFF00478824C0
+:108B70003C04800824030001AF910028AC80006C05
+:108B8000A383001C0A000C3AAF8600248C9F0014BB
+:108B90000A000C2CAF9F00208D6200680A000C7642
+:108BA0003C0E800034C409808C8900708CA30014B2
+:108BB0000123382B10E00004000000008C820070BC
+:108BC0000A000C763C0E80008CA200140A000C7681
+:108BD0003C0E80008F85002427BDFFE0AFBF00184A
+:108BE000AFB1001414A00008AFB000103C04800026
+:108BF00034870A0090E600302402000530C3003FAD
+:108C0000106200B9348409008F91002000A08021F7
+:108C10003C048000348E0A008DCD00043C06080020
+:108C20008CC63FD831A73FFF00E6602B558000017E
+:108C300000E03021938F001C11E0007800D0282B39
+:108C4000349F098093F9007C3338000213000079C7
+:108C50002403003400C3102B144000D9000000008E
+:108C600000C3302300D0282B3C010800A4233FE49C
+:108C700014A0006E020018213C0408008C843FD42C
+:108C80000064402B55000001006020213C0580005D
+:108C900034A90A00912A003C3C010800AC243FDCC6
+:108CA00031430020146000030000482134AB0E0063
+:108CB0008D6900188F88002C0128202B1080005F00
+:108CC000000000003C0508008CA53FDC00A96821DD
+:108CD000010D602B1180005C00B0702B010938235E
+:108CE00000E028213C010800AC273FDC1200000313
+:108CF000240AFFFC10B0008D3224000300AA1824BF
+:108D00003C010800A4203FFA3C010800AC233FDCF2
+:108D1000006028218F840024120400063C0B800888
+:108D20008D6C006C02002021AF9100202590000185
+:108D3000AD70006C8F8D002800858823AF910024D2
+:108D400001A52023AF840028122000022407001868
+:108D5000240700103C1880083706008090CF006878
+:108D60003C010800A0273FF82407000131EE00FF76
+:108D700011C70047000000001480001800002821DF
+:108D80003C06800034D1098034CD010091A6000951
+:108D90008E2C001824C40001000C86023205007FCE
+:108DA000308B007F1165007F2407FF803C1980080D
+:108DB00037290080A124004C3C0808008D083FF4AE
+:108DC000241800023C010800A0384039350F000883
+:108DD0003C010800AC2F3FF4240500103C02800049
+:108DE00034440A009083003C307F002013E00005EB
+:108DF00000A02021240A00013C010800AC2A3FDC2D
+:108E000034A400018FBF00188FB100148FB0001080
+:108E10000080102103E0000827BD00203C0108006D
+:108E2000A4203FE410A0FF94020018210A000CCAFD
+:108E300000C018210A000CC1240300303C050800C2
+:108E40008CA53FDC00B0702B11C0FFA80000000013
+:108E50003C19080097393FE40325C0210307782B0C
+:108E600011E000072CAA00043C0360008C6254044B
+:108E7000305F003F17E0FFE3240400422CAA000407
+:108E80001140FF9A240400420A000D2E8FBF0018E3
+:108E90001528FFB9000000008CCA00183C1F800094
+:108EA00024020002015F1825ACC3001837F90A003C
+:108EB000A0C200689329003C2404000400A01021F3
+:108EC000312800203C010800A02440391100000294
+:108ED00024050010240200013C010800AC223FD40C
+:108EE0000A000D243C0280008F8800288C890060D5
+:108EF0000109282B14A00002010088218C91006038
+:108F00003C048000348B0E008D640018240A00019C
+:108F10000220282102203021A38A001C0E000B8D84
+:108F2000022080210A000CB0AF82002C00045823DC
+:108F300012200007316400033C0E800035C7098011
+:108F400090ED007C31AC000415800019248F0004E2
+:108F50003C010800A4243FFA3C1F080097FF3FFA99
+:108F600003E5C82100D9C02B1300FF6B8F840024B8
+:108F70002CA6000514C0FFA32404004230A2000365
+:108F80001440000200A2182324A3FFFC3C010800A7
+:108F9000AC233FDC3C010800A4203FFA0A000CF19E
+:108FA0000060282100C770240A000D1701C7202681
+:108FB0003C010800A42F3FFA0A000D8200000000C7
+:108FC0003C010800AC203FDC0A000D2D24040042C7
+:108FD0008F8300283C05800034AA0A001460000634
+:108FE00000001021914700302406000530E400FF06
+:108FF000108600030000000003E0000800000000ED
+:10900000914B0048316900FF000941C21500FFFA89
+:109010003C0680083C04080094843FE43C030800BC
+:109020008C633FFC3C1908008F393FDC3C0F080083
+:1090300095EF3FFA0064C0218CCD00040319702124
+:1090400001CF602134AB0E00018D282318A0001D34
+:1090500000000000914F004C8F8C0034956D001083
+:1090600031EE00FF8D89000401AE30238D8A0000AF
+:1090700030CEFFFF000E29000125C8210000382155
+:10908000014720210325182B0083C021AD9900043E
+:10909000AD980000918F000A01CF6821A18D000AD0
+:1090A000956500128F8A0034A5450008954B00385D
+:1090B00025690001A54900389148000D35070008D1
+:1090C000A147000D03E000080000000027BDFFD805
+:1090D000AFB000189388001C8FB000143C0A8000C9
+:1090E0003C197FFF8F8700243738FFFFAFBF002078
+:1090F000AFB1001C355F0A000218182493EB003C46
+:1091000000087FC03C02BFFF006F60252CF000010B
+:109110003449FFFF3C1F08008FFF3FFC8F99003050
+:109120003C18080097183FF2018978240010478006
+:109130003C07EFFF3C05F0FF01E818253C118000DB
+:109140003169002034E2FFFF34ADFFFF362E098085
+:1091500027A500102406000203F96023270B000254
+:10916000354A0E000062182400808021152000027C
+:10917000000040218D48001CA7AB0012058000397B
+:109180002407000030E800FF00083F000067582572
+:109190003C028008AFAB0014344F008091EA0068B5
+:1091A0003C08080091083FF93C09DFFF352CFFFF20
+:1091B000000AF82B3C02080094423FECA3A80011DF
+:1091C000016CC024001FCF40031918258FA7001081
+:1091D000AFA300143C0C0800918C3FFBA7A2001623
+:1091E0008FAB001400ED48243C0F01003C0A0FFF38
+:1091F000012FC82531980003355FFFFF016D402422
+:109200003C027000033F382400181E0000E248258D
+:1092100001037825AFAF0014AFA9001091CC007CFA
+:109220000E000092A3AC0015362D0A0091A6003C5A
+:1092300030C4002010800006260200083C110800FF
+:1092400096313FE8262EFFFF3C010800A42E3FE8A0
+:109250008FBF00208FB1001C8FB0001803E0000802
+:1092600027BD00288F8B002C010B502B5540FFC5CC
+:10927000240700010A000E0E30E800FF9383001C53
+:109280003C02800027BDFFD834480A0000805021EE
+:10929000AFBF002034460AC0010028211060000E34
+:1092A0003444098091070030240B00058F89002089
+:1092B00030EC003F118B000B00003821AFA90010EB
+:1092C0003C0B80088D69006CAFAA00180E00015A93
+:1092D000AFA90014A380001C8FBF002003E000088A
+:1092E00027BD00288D1F00483C1808008F183FDC60
+:1092F0008F9900283C027FFF8D0800443443FFFF14
+:10930000AFA900103C0B80088D69006C03E370244A
+:109310000319782101CF682301A83821AFAA0018CA
+:109320000E00015AAFA900140A000E62A380001CAF
+:109330003C05800034A60A0090C7003C3C060800AB
+:1093400094C63FFA3C0208008C423FF430E3002010
+:10935000000624001060001E004438253C088008E8
+:109360003505008090A30068000048212408000112
+:1093700000002821240400013C0680008CCD0178E7
+:1093800005A0FFFE34CF0140ADE800083C02080014
+:109390008C423FFCA5E50004A5E40006ADE2000C0C
+:1093A0003C04080090843FF93C0380083479008035
+:1093B000A1E40012ADE70014A5E900189338004CB1
+:1093C0003C0E1000A1F8002D03E00008ACCE01789F
+:1093D00034A90E008D28001C3C0C08008D8C3FDC4D
+:1093E000952B0016952A0014018648213164FFFF51
+:1093F0000A000E8A3145FFFF3C04800034830A00D6
+:109400009065003C30A200201040001934870E0007
+:109410000000402100003821000020213C0680008F
+:109420008CC901780520FFFE34CA014034CF010009
+:1094300091EB0009AD4800083C0E08008DCE3FFCC2
+:10944000240DFF91240C00403C081000A5440004AA
+:10945000A5470006AD4E000CA14D0012AD4C001406
+:10946000A5400018A14B002D03E00008ACC801780E
+:109470008CE8001894E6001294E4001030C7FFFF57
+:109480000A000EB33084FFFF3C04800034830A00DE
+:109490009065003C30A200201040002727BDFFF857
+:1094A0002409000100003821240800013C06800046
+:1094B0008CCA01780540FFFE3C0280FF34C40100E5
+:1094C000908D00093C0C0800918C4039A3AD00033D
+:1094D0008FAB00003185007F3459FFFF01665025B6
+:1094E000AFAA00009083000AA3A0000200057E003E
+:1094F000A3A300018FB8000034CB0140240C30003E
+:109500000319702401CF6825AD6D000C27BD00083C
+:10951000AD6C0014A5600018AD690008A5670004D3
+:109520002409FF80A56800063C081000A16900120C
+:1095300003E00008ACC8017834870E008CE90018FD
+:1095400094E6001294E4001030C8FFFF0A000ED722
+:109550003087FFFF27BDFFE0AFB100143C11800052
+:10956000AFB00010AFBF001836380A00970F0032B6
+:10957000363001000E000B8931E43FFF8E0E0000F3
+:10958000240DFF803C04200001C25821016D60249D
+:10959000000C4940316A007F012A4025010438252A
+:1095A0003C048008AE2708303486008090C50068EF
+:1095B0002403000230A200FF104300048F9F00200C
+:1095C0008F990024AC9F0068AC9900648FBF00188D
+:1095D0008FB100148FB0001003E0000827BD0020F9
+:1095E0003C0A0800254A3AA83C09080025293B38CE
+:1095F0003C08080025082F443C07080024E73C04E9
+:109600003C06080024C6392C3C05080024A53680F9
+:109610003C040800248432843C030800246339E0BD
+:109620003C0208002442377C3C010800AC2A3FB8C9
+:109630003C010800AC293FB43C010800AC283FB015
+:109640003C010800AC273FBC3C010800AC263FCCE5
+:109650003C010800AC253FC43C010800AC243FC0DD
+:109660003C010800AC233FD03C010800AC223FC8BD
+:0896700003E000080000000007
+:08967800800009408000090098
+:10968000800801008008008080080000800E000033
+:10969000800800808008000080000A8080000A00A6
+:0896A000800009808000090030
 :00000001FF
 /*
  * This file contains firmware data derived from proprietary unpublished
diff --git a/firmware/bnx2x/bnx2x-e1-6.0.34.0.fw.ihex b/firmware/bnx2x/bnx2x-e1-6.0.34.0.fw.ihex
deleted file mode 100644
index 33b584c7c1a..00000000000
--- a/firmware/bnx2x/bnx2x-e1-6.0.34.0.fw.ihex
+++ /dev/null
@@ -1,9476 +0,0 @@
-:1000000000003BB0000000680000070C00003C202E
-:1000100000001AF8000043300000007C00005E3051
-:10002000000079E800005EB0000000B40000D8A035
-:100030000000800C0000D9580000008800015968B9
-:10004000000039C4000159F800000090000193C07D
-:100050000000ABA80001945800000FFC000240080B
-:100060000000000400025008020400480000000FD5
-:100070000204005400000045020400580000000083
-:100080000204005C0000000602040070000000048E
-:1000900002040078000000000204007C1217000037
-:1000A00002040080221700000204008432170000BE
-:1000B00006040088000000050204009C12150000E0
-:1000C000020400A022150000020400A43215000062
-:1000D000060400A800000004020400B8021000009A
-:1000E000020400BC00100000020400C01010000058
-:1000F000020400C420100000020400C830100000F8
-:10010000060400CC00000004020400DC0010000023
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000060400EC00000004A1
-:100130000104012400000000010401280000000067
-:100140000104012C00000000010401300000000047
-:1001500002040004000000FF02040008000000FF89
-:100160000204000C000000FF02040010000000FF69
-:1001700002040014000000FF02040018000000FF49
-:100180000204001C000000FF02040020000000FF29
-:10019000020400240000003E0204002800000000C9
-:1001A0000204002C0000003F020400300000003F69
-:1001B000020400340000003F020400380000000088
-:1001C0000204003C0000003F020400400000003F29
-:1001D000020400440000003F020420080000021155
-:1001E0000204200C0000020002042010000002049F
-:1001F00002042014000002190204201C0000FFFF6A
-:10020000020420200000FFFF020420240000FFFF62
-:10021000020420280000FFFF0604203800000080B0
-:100220000204223807FFFFFF0204223C0000003FC7
-:100230000204224007FFFFFF020422440000000FD7
-:1002400001042248000000000104224C00000000CC
-:1002500001042250000000000104225400000000AC
-:1002600001042258000000000104225C000000008C
-:10027000010422600000000001042264000000006C
-:1002800001042268000000000104226C000000004C
-:10029000010422700000000001042274000000002C
-:1002A00001042278000000000104227C000000000C
-:1002B000020424BC000000010C042000000003E83C
-:1002C0000A042000000000010B0420000000000AC6
-:1002D0000605400000000D0002050044000000205B
-:1002E00002050048000000320205009002150020BF
-:1002F000020500940215002002050098000000305D
-:100300000205009C08100000020500A00000003358
-:10031000020500A400000030020500A80000003122
-:10032000020500AC00000002020500B0000000055C
-:10033000020500B400000006020500B8000000023B
-:10034000020500BC00000002020500C00000000021
-:10035000020500C400000005020500C800000002FC
-:10036000020500CC00000002020500D000000002DF
-:10037000020500D400000001020501140000000184
-:100380000205011C0000000102050120000000021E
-:1003900002050204000000010205020C00000040FA
-:1003A00002050210000000400205021C00000020AF
-:1003B00002050220000000130205022400000020B4
-:1003C000060502400000000A04050280002000002B
-:1003D000020500500000000702050054000000075D
-:1003E00002050058000000000205005C0000000843
-:1003F0000605006000000004020500D800000006A9
-:10040000020500E00000000D020500E40000002DE0
-:10041000020500E800000000020500EC00000020DA
-:10042000020500F000000000020500F400000020BA
-:10043000020500F800000000020500FC000000209A
-:100440000205000400000001020500080000000190
-:100450000205000C00000001020500100000000170
-:100460000205001400000001020500180000000150
-:100470000205001C00000001020500200000000130
-:100480000205002400000001020500280000000110
-:100490000205002C000000010205003000000001F0
-:1004A00002050034000000010205003800000001D0
-:1004B0000205003C000000010205004000000001B0
-:1004C0000406100002000020020600DC000000010B
-:1004D000010600D80000000004060200000302200C
-:1004E000020600DC0000000002060068000000B800
-:1004F0000206007800000114010600B800000000A8
-:10050000010600C8000000000206006C000000B8F0
-:100510000206007C00000114010600BC000000007F
-:10052000010600CC0000000007180400007B00005A
-:100530000818076000140223071C00002A1E000090
-:10054000071C800031E60A88071D00001DDD170228
-:10055000081D4470577202250118000000000000B9
-:10056000011800040000000001180008000000004D
-:100570000118000C0000000001180010000000002D
-:100580000118001400000000021800200000000103
-:1005900002180024000000020218002800000003D6
-:1005A0000218002C000000000218003000000004B7
-:1005B000021800340000000102180038000000009A
-:1005C0000218003C00000001021800400000000476
-:1005D000021800440000000002180048000000015A
-:1005E0000218004C00000003021800500000000038
-:1005F0000218005400000001021800580000000416
-:100600000218005C000000000218006000000001F9
-:1006100002180064000000030218006800000000D7
-:100620000218006C000000010218007000000004B5
-:100630000218007400000000021800780000000496
-:100640000218007C00000003061800800000000271
-:10065000021800A400003FFF021800A8000003FFDA
-:1006600002180224000000000218023400000000FA
-:100670000218024C00000000021802E4000000FF13
-:100680000618100000000400021B8BC000000001CF
-:10069000021B800000000034021B80400000001894
-:1006A000021B80800000000C021B80C000000020A4
-:1006B0000C1B83000007A1200A1B830000000138E7
-:1006C0000B1B8300000013880A1B834000000000FE
-:1006D0000C1B8340000001F40B1B8340000000054D
-:1006E000021B83800007A120021B83C0000001F4CD
-:1006F000061A100000000273041A19CC0001022728
-:10070000061A2008000000C8061A20000000000297
-:10071000041A499800040228061A2E280000000234
-:10072000061A2E2000000002061A0800000000022F
-:10073000061A080800000004061A08180000000243
-:10074000041A08B00002022C061A2FD0000000067E
-:10075000041A2FE80002022E041A2FC000040230EF
-:10076000041A300000010234061A300400000003AD
-:10077000041A301000010235061A3014000000037C
-:10078000041A302000010236061A3024000000034B
-:10079000041A303000010237061A3034000000031A
-:1007A000041A304000010238061A304400000003E9
-:1007B000041A305000010239061A305400000003B8
-:1007C000041A30600001023A061A30640000000387
-:1007D000041A30700001023B061A30740000000356
-:1007E000041A30800001023C061A30840000000325
-:1007F000041A30900001023D061A309400000003F4
-:10080000041A30A00001023E061A30A400000003C2
-:10081000041A30B00001023F061A30B40000000391
-:10082000041A30C000010240061A30C40000000360
-:10083000041A30D000010241061A30D4000000032F
-:10084000041A30E000010242061A30E400000003FE
-:10085000041A30F000010243061A30F400000003CD
-:10086000041A310000010244061A3104000000039A
-:10087000041A311000010245061A31140000000369
-:10088000041A312000010246061A31240000000338
-:10089000041A313000010247061A31340000000307
-:1008A000041A314000010248061A314400000003D6
-:1008B000041A315000010249061A315400000003A5
-:1008C000041A31600001024A061A31640000000374
-:1008D000041A31700001024B061A31740000000343
-:1008E000041A31800001024C061A31840000000312
-:1008F000041A31900001024D061A319400000003E1
-:10090000041A31A00001024E061A31A400000003AF
-:10091000041A31B00001024F061A31B4000000037E
-:10092000041A31C000010250061A31C4000000034D
-:10093000041A31D000010251061A31D4000000031C
-:10094000041A31E000010252061A31E400000003EB
-:10095000041A31F000010253061A31F400000003BA
-:10096000041A320000010254061A32040000000387
-:10097000041A321000010255061A32140000000356
-:10098000041A322000010256061A32240000000325
-:10099000041A323000010257061A323400000003F4
-:1009A000041A324000010258061A324400000003C3
-:1009B000041A325000010259061A32540000000392
-:1009C000041A32600001025A061A32640000000361
-:1009D000041A32700001025B061A32740000000330
-:1009E000041A32800001025C061A328400000003FF
-:1009F000041A32900001025D061A329400000003CE
-:100A0000041A32A00001025E061A32A4000000039C
-:100A1000041A32B00001025F061A32B4000000036B
-:100A2000041A32C000010260061A32C4000000033A
-:100A3000041A32D000010261061A32D40000000309
-:100A4000041A32E000010262061A32E400000003D8
-:100A5000041A32F000010263061A32F400000003A7
-:100A6000041A330000010264061A33040000000374
-:100A7000041A331000010265061A33140000000343
-:100A8000041A332000010266061A33240000000312
-:100A9000041A333000010267061A333400000003E1
-:100AA000041A334000010268061A334400000003B0
-:100AB000041A335000010269061A3354000000037F
-:100AC000041A33600001026A061A3364000000034E
-:100AD000041A33700001026B061A3374000000031D
-:100AE000041A33800001026C061A338400000003EC
-:100AF000041A33900001026D061A339400000003BB
-:100B0000041A33A00001026E061A33A40000000389
-:100B1000041A33B00001026F061A33B40000000358
-:100B2000041A33C000010270061A33C40000000327
-:100B3000041A33D000010271061A33D400000003F6
-:100B4000041A33E000010272061A33E400000003C5
-:100B5000041A33F000010273061A33F40000000394
-:100B6000041A340000010274061A34040000000361
-:100B7000041A341000010275061A34140000000330
-:100B8000041A342000010276061A342400000003FF
-:100B9000041A343000010277061A343400000003CE
-:100BA000041A344000010278061A3444000000039D
-:100BB000041A345000010279061A3454000000036C
-:100BC000041A34600001027A061A3464000000033B
-:100BD000041A34700001027B061A3474000000030A
-:100BE000041A34800001027C061A348400000003D9
-:100BF000041A34900001027D061A349400000003A8
-:100C0000041A34A00001027E061A34A40000000376
-:100C1000041A34B00001027F061A34B40000000345
-:100C2000041A34C000010280061A34C40000000314
-:100C3000041A34D000010281061A34D400000003E3
-:100C4000041A34E000010282061A34E400000003B2
-:100C5000041A34F000010283061A34F40000000381
-:100C6000041A350000010284061A3504000000034E
-:100C7000041A351000010285061A3514000000031D
-:100C8000041A352000010286061A352400000003EC
-:100C9000041A353000010287061A353400000003BB
-:100CA000041A354000010288061A3544000000038A
-:100CB000041A355000010289061A35540000000359
-:100CC000041A35600001028A061A35640000000328
-:100CD000041A35700001028B061A357400000003F7
-:100CE000041A35800001028C061A358400000003C6
-:100CF000041A35900001028D061A35940000000395
-:100D0000041A35A00001028E061A35A40000000363
-:100D1000041A35B00001028F061A35B40000000332
-:100D2000041A35C000010290061A35C40000000301
-:100D3000041A35D000010291061A35D400000003D0
-:100D4000041A35E000010292061A35E4000000039F
-:100D5000041A35F000010293061A35F4000000036E
-:100D6000041A360000010294061A3604000000033B
-:100D7000041A361000010295061A3614000000030A
-:100D8000041A362000010296061A362400000003D9
-:100D9000041A363000010297061A363400000003A8
-:100DA000041A364000010298061A36440000000377
-:100DB000041A365000010299061A36540000000346
-:100DC000041A36600001029A061A36640000000315
-:100DD000041A36700001029B061A367400000003E4
-:100DE000041A36800001029C061A368400000003B3
-:100DF000041A36900001029D061A36940000000382
-:100E0000041A36A00001029E061A36A40000000350
-:100E1000041A36B00001029F061A36B4000000031F
-:100E2000041A36C0000102A0061A36C400000003EE
-:100E3000041A36D0000102A1061A36D400000003BD
-:100E4000041A36E0000102A2061A36E4000000038C
-:100E5000041A36F0000102A3061A36F4000000035B
-:100E6000041A3700000102A4061A37040000000328
-:100E7000041A3710000102A5061A371400000003F7
-:100E8000041A3720000102A6061A372400000003C6
-:100E9000041A3730000102A7061A37340000000395
-:100EA000041A3740000102A8061A37440000000364
-:100EB000041A3750000102A9061A37540000000333
-:100EC000041A3760000102AA061A37640000000302
-:100ED000041A3770000102AB061A377400000003D1
-:100EE000041A3780000102AC061A378400000003A0
-:100EF000041A3790000102AD061A3794000000036F
-:100F0000041A37A0000102AE061A37A4000000033D
-:100F1000041A37B0000102AF061A37B4000000030C
-:100F2000041A37C0000102B0061A37C400000003DB
-:100F3000041A37D0000102B1061A37D400000003AA
-:100F4000041A37E0000102B2061A37E40000000379
-:100F5000041A37F0000102B3061A37F40000000348
-:100F6000041A3800000102B4061A38040000000315
-:100F7000041A3810000102B5061A381400000003E4
-:100F8000041A3820000102B6061A382400000003B3
-:100F9000041A3830000102B7061A38340000000382
-:100FA000041A3840000102B8061A38440000000351
-:100FB000041A3850000102B9061A38540000000320
-:100FC000041A3860000102BA061A386400000003EF
-:100FD000041A3870000102BB061A387400000003BE
-:100FE000041A3880000102BC061A3884000000038D
-:100FF000041A3890000102BD061A3894000000035C
-:10100000041A38A0000102BE061A38A4000000032A
-:10101000041A38B0000102BF061A38B400000003F9
-:10102000041A38C0000102C0061A38C400000003C8
-:10103000041A38D0000102C1061A38D40000000397
-:10104000041A38E0000102C2061A38E40000000366
-:10105000041A38F0000102C3061A38F40000000335
-:10106000041A3900000102C4061A39040000000302
-:10107000041A3910000102C5061A391400000003D1
-:10108000041A3920000102C6061A392400000003A0
-:10109000041A3930000102C7061A3934000000036F
-:1010A000041A3940000102C8061A3944000000033E
-:1010B000041A3950000102C9061A3954000000030D
-:1010C000041A3960000102CA061A396400000003DC
-:1010D000041A3970000102CB061A397400000003AB
-:1010E000041A3980000102CC061A3984000000037A
-:1010F000041A3990000102CD061A39940000000349
-:10110000041A39A0000102CE061A39A40000000317
-:10111000041A39B0000102CF061A39B400000003E6
-:10112000041A39C0000102D0061A39C400000003B5
-:10113000041A39D0000102D1061A39D40000000384
-:10114000041A39E0000102D2061A39E40000000353
-:10115000041A39F0000102D3061A39F40000000322
-:10116000041A3A00000102D4061A3A0400000003EF
-:10117000041A3A10000102D5061A3A1400000003BE
-:10118000041A3A20000102D6061A3A24000000038D
-:10119000041A3A30000102D7061A3A34000000035C
-:1011A000041A3A40000102D8061A3A44000000032B
-:1011B000041A3A50000102D9061A3A5400000003FA
-:1011C000041A3A60000102DA061A3A6400000003C9
-:1011D000041A3A70000102DB061A3A740000000398
-:1011E000041A3A80000102DC061A3A840000000367
-:1011F000041A3A90000102DD061A3A940000000336
-:10120000041A3AA0000102DE061A3AA40000000304
-:10121000041A3AB0000102DF061A3AB400000003D3
-:10122000041A3AC0000102E0061A3AC400000003A2
-:10123000041A3AD0000102E1061A3AD40000000371
-:10124000041A3AE0000102E2061A3AE40000000340
-:10125000041A3AF0000102E3061A3AF4000000030F
-:10126000041A3B00000102E4061A3B0400000003DC
-:10127000041A3B10000102E5061A3B1400000003AB
-:10128000041A3B20000102E6061A3B24000000037A
-:10129000041A3B30000102E7061A3B340000000349
-:1012A000041A3B40000102E8061A3B440000000318
-:1012B000041A3B50000102E9061A3B5400000003E7
-:1012C000041A3B60000102EA061A3B6400000003B6
-:1012D000041A3B70000102EB061A3B740000000385
-:1012E000041A3B80000102EC061A3B840000000354
-:1012F000041A3B90000102ED061A3B940000000323
-:10130000041A3BA0000102EE061A3BA400000003F1
-:10131000041A3BB0000102EF061A3BB400000003C0
-:10132000041A3BC0000102F0061A3BC4000000038F
-:10133000041A3BD0000102F1061A3BD4000000035E
-:10134000041A3BE0000102F2061A3BE4000000032D
-:10135000041A3BF0000102F3061A3BF400000003FC
-:10136000041A3C00000102F4061A3C0400000003C9
-:10137000041A3C10000102F5061A3C140000000398
-:10138000041A3C20000102F6061A3C240000000367
-:10139000041A3C30000102F7061A3C340000000336
-:1013A000041A3C40000102F8061A3C440000000305
-:1013B000041A3C50000102F9061A3C5400000003D4
-:1013C000041A3C60000102FA061A3C6400000003A3
-:1013D000041A3C70000102FB061A3C740000000372
-:1013E000041A3C80000102FC061A3C840000000341
-:1013F000041A3C90000102FD061A3C940000000310
-:10140000041A3CA0000102FE061A3CA400000003DE
-:10141000041A3CB0000102FF061A3CB400000003AD
-:10142000041A3CC000010300061A3CC4000000037B
-:10143000041A3CD000010301061A3CD4000000034A
-:10144000041A3CE000010302061A3CE40000000319
-:10145000041A3CF000010303061A3CF400000003E8
-:10146000041A3D0000010304061A3D0400000003B5
-:10147000041A3D1000010305061A3D140000000384
-:10148000041A3D2000010306061A3D240000000353
-:10149000041A3D3000010307061A3D340000000322
-:1014A000041A3D4000010308061A3D4400000003F1
-:1014B000041A3D5000010309061A3D5400000003C0
-:1014C000041A3D600001030A061A3D64000000038F
-:1014D000041A3D700001030B061A3D74000000035E
-:1014E000041A3D800001030C061A3D84000000032D
-:1014F000041A3D900001030D061A3D9400000003FC
-:10150000041A3DA00001030E061A3DA400000003CA
-:10151000041A3DB00001030F061A3DB40000000399
-:10152000041A3DC000010310061A3DC40000000368
-:10153000041A3DD000010311061A3DD40000000337
-:10154000041A3DE000010312061A3DE40000000306
-:10155000041A3DF000010313061A3DF400000003D5
-:10156000041A3E0000010314061A3E0400000003A2
-:10157000041A3E1000010315061A3E140000000371
-:10158000041A3E2000010316061A3E240000000340
-:10159000041A3E3000010317061A3E34000000030F
-:1015A000041A3E4000010318061A3E4400000003DE
-:1015B000041A3E5000010319061A3E5400000003AD
-:1015C000041A3E600001031A061A3E64000000037C
-:1015D000041A3E700001031B061A3E74000000034B
-:1015E000041A3E800001031C061A3E84000000031A
-:1015F000041A3E900001031D061A3E9400000003E9
-:10160000041A3EA00001031E061A3EA400000003B7
-:10161000041A3EB00001031F061A3EB40000000386
-:10162000041A3EC000010320061A3EC40000000355
-:10163000041A3ED000010321061A3ED40000000324
-:10164000041A3EE000010322061A3EE400000003F3
-:10165000041A3EF000010323061A3EF400000003C2
-:10166000041A3F0000010324061A3F04000000038F
-:10167000041A3F1000010325061A3F14000000035E
-:10168000041A3F2000010326061A3F24000000032D
-:10169000041A3F3000010327061A3F3400000003FC
-:1016A000041A3F4000010328061A3F4400000003CB
-:1016B000041A3F5000010329061A3F54000000039A
-:1016C000041A3F600001032A061A3F640000000369
-:1016D000041A3F700001032B061A3F740000000338
-:1016E000041A3F800001032C061A3F840000000307
-:1016F000041A3F900001032D061A3F9400000003D6
-:10170000041A3FA00001032E061A3FA400000003A4
-:10171000041A3FB00001032F061A3FB40000000373
-:10172000041A3FC000010330061A3FC40000000342
-:10173000041A3FD000010331061A3FD40000000311
-:10174000041A3FE000010332061A3FE400000007DC
-:10175000041A4CB000080333061A400000000124AC
-:10176000021A492000000000061A2500000000109F
-:10177000061A258000000012061A09C00000004861
-:10178000061A080000000002061A082000000012D5
-:10179000041A2FB00002033B041A4CF00002033D70
-:1017A000061A500000000004061A449000000124AC
-:1017B000021A492400000000061A2540000000100B
-:1017C000061A25C800000012061A0AE000000048A8
-:1017D000061A081000000002061A0868000000122D
-:1017E000041A2FB80002033F041A4CF80002034108
-:1017F000061A5010000000040200A468000AFFDC72
-:101800000200A280000000010200A294071D29111D
-:101810000200A298000000000200A29C009C042488
-:101820000200A2A0000000000200A2A40000020921
-:101830000200A4FCFF000000020100B4000000014F
-:10184000020100B800000001020100DC00000001FC
-:10185000020101000000000102010104000000017A
-:101860000201007C0030000002010084000000281A
-:101870000201008C000000000201013000000004A1
-:101880000201025C000000010201032800000000C8
-:101890000201055400000030020100C400000001F4
-:1018A000020100CC00000001020100F8000000016C
-:1018B000020100F000000001020100800030000081
-:1018C00002010088000000280201009000000000D2
-:1018D0000201013400000004020102DC00000001EA
-:1018E0000201032C0000000002010564000000302A
-:1018F000020100C800000001020100D00000000148
-:10190000020100FC00000001020100F400000001DF
-:10191000020C100000000028020C200800000A1130
-:10192000020C200C00000A00020C201000000A0427
-:10193000020C201C0000FFFF020C20200000FFFF13
-:10194000020C20240000FFFF020C20280000FFFFF3
-:10195000020C203800000020020C203C0000002176
-:10196000020C204000000022020C20440000002352
-:10197000020C204800000024020C204C000000252E
-:10198000020C205000000026020C2054000000270A
-:10199000020C205800000028020C205C00000029E6
-:1019A000020C20600000002A020C20640000002BC2
-:1019B000020C20680000002C020C206C0000002D9E
-:1019C000020C20700000002E020C20740000002F7A
-:1019D000020C207800000010060C207C0000004F54
-:1019E000020C21B800000001020C21BC0000000123
-:1019F000020C21C000000001020C21C40000000103
-:101A0000020C21C800000001020C21CC00000001E2
-:101A1000020C21D000000001020C21D400000001C2
-:101A2000020C21D800000001020C21DC00000001A2
-:101A3000020C21E000000001020C21E40000000182
-:101A4000020C21E800000001020C21EC0000000162
-:101A5000020C21F000000001020C21F40000000142
-:101A6000020C21F800000001060C21FC0000000F10
-:101A7000020C223807FFFFFF020C223C0000003F4F
-:101A8000020C224007FFFFFF020C22440000000F5F
-:101A9000010C224800000000010C224C0000000054
-:101AA000010C225000000000010C22540000000034
-:101AB000010C225800000000010C225C0000000014
-:101AC000010C226000000000010C226400000000F4
-:101AD000010C226800000000010C226C00000000D4
-:101AE000010C227000000000010C227400000000B4
-:101AF000010C227800000000010C227C0000000094
-:101B0000020C24BC000000010C0C2000000003E8C3
-:101B10000A0C2000000000010B0C20000000000A4D
-:101B2000020C400800000562020C400C0000055148
-:101B3000020C401000000555020C40140000057214
-:101B4000020C401C0000FFFF020C40200000FFFFC1
-:101B5000020C40240000FFFF020C40280000FFFFA1
-:101B6000020C403800000046020C403C0000000C13
-:101B7000060C40400000005E020C41B8000000016D
-:101B8000060C41BC0000001F020C423807FFFFFF9B
-:101B9000020C423C0000003F020C424007FFFFFFE6
-:101BA000020C42440000000F010C424800000000FB
-:101BB000010C424C00000000010C425000000000EB
-:101BC000010C425400000000010C425800000000CB
-:101BD000010C425C00000000010C426000000000AB
-:101BE000010C426400000000010C4268000000008B
-:101BF000010C426C00000000010C4270000000006B
-:101C0000010C427400000000010C4278000000004A
-:101C1000010C427C00000000010C4280000000002A
-:101C2000020C44C0000000010C0C4000000003E85E
-:101C30000A0C4000000000010B0C40000000000AEC
-:101C4000060D400000000A00020D004400000032B2
-:101C5000020D008C02150020020D009002150020DC
-:101C6000020D009408100000020D009800000033DF
-:101C7000020D009C00000002020D00A00000000008
-:101C8000020D00A400000005020D00A800000005E0
-:101C9000060D00AC00000002020D00B400000002BE
-:101CA000020D00B800000003020D00BC000000029D
-:101CB000020D00C000000001020D00C8000000027B
-:101CC000020D00CC00000002020D015C00000001CA
-:101CD000020D016400000001020D01680000000215
-:101CE000020D020400000001020D020C00000020A1
-:101CF000020D021000000040020D0214000000401E
-:101D0000020D022000000003020D02240000001852
-:101D1000060D028000000012040D030000180343AA
-:101D2000060D03600000000C020D004C00000001D5
-:101D3000020D005000000002020D005400000000DF
-:101D4000020D005800000008060D005C00000004B1
-:101D5000020D00C400000004020D0114000000097F
-:101D6000020D011800000029020D011C0000000AEC
-:101D7000020D01200000002A020D012400000000D5
-:101D8000020D012800000020020D012C00000000BF
-:101D9000020D013000000020020D0134000000009F
-:101DA000020D013800000020020D013C000000007F
-:101DB000020D014000000020020D0144000000005F
-:101DC000020D014800000020020D00040000000187
-:101DD000020D000800000001020D000C00000001CF
-:101DE000020D001000000001020D001400000001AF
-:101DF000020D001800000001020D001C000000018F
-:101E0000020D002000000001020D0024000000016E
-:101E1000020D002800000001020D002C000000014E
-:101E2000020D003000000001020D0034000000012E
-:101E3000020D003800000001020D003C000000010E
-:101E4000060E200000000800020E004C00000032C8
-:101E5000020E009402150020020E009802150020C8
-:101E6000020E009C00000030020E00A008100000CE
-:101E7000020E00A400000033020E00A80000003093
-:101E8000020E00AC00000031020E00B000000002A3
-:101E9000020E00B400000004020E00B800000000B2
-:101EA000020E00BC00000002020E00C00000000292
-:101EB000020E00C400000000020E00C80000000274
-:101EC000020E00CC00000007020E00D0000000024D
-:101ED000020E00D400000002020E00D80000000133
-:101EE000020E014400000001020E014C000000013E
-:101EF000020E015000000002020E02040000000168
-:101F0000020E020C00000040020E02100000004011
-:101F1000020E021C00000004020E0220000000203D
-:101F2000020E02240000000E020E02280000001B18
-:101F3000060E030000000012040E0280001B035B6B
-:101F4000060E02EC00000005020E00540000000C1A
-:101F5000020E00580000000C020E005C00000000A1
-:101F6000020E006000000010060E00640000000475
-:101F7000020E00DC00000003020E01100000000F42
-:101F8000020E01140000002F020E011800000000D4
-:101F9000020E011C00000020020E000400000001DF
-:101FA000020E000800000001020E000C00000001FB
-:101FB000020E001000000001020E001400000001DB
-:101FC000020E001800000001020E001C00000001BB
-:101FD000020E002000000001020E0024000000019B
-:101FE000020E002800000001020E002C000000017B
-:101FF000020E003000000001020E0034000000015B
-:10200000020E003800000001020E003C000000013A
-:10201000020E004000000001020E0044000000011A
-:102020000730040000B00000083007680013037692
-:1020300007340000332700000734800032520CCAF6
-:10204000073500001A8C195F083539A058CC037881
-:10205000013000000000000001300004000000001A
-:1020600001300008000000000130000C00000000FA
-:1020700001300010000000000130001400000000DA
-:1020800002300020000000010230002400000002A5
-:1020900002300028000000030230002C0000000085
-:1020A0000230003000000004023000340000000163
-:1020B00002300038000000000230003C0000000147
-:1020C0000230004000000004023000440000000024
-:1020D00002300048000000010230004C0000000304
-:1020E00002300050000000000230005400000001E7
-:1020F00002300058000000040230005C00000000C4
-:1021000002300060000000010230006400000003A3
-:1021100002300068000000000230006C0000000186
-:102120000230007000000004023000740000000063
-:1021300002300078000000040230007C0000000340
-:102140000630008000000002023000A400003FFFC3
-:10215000023000A8000003FF02300224000000004B
-:1021600002300234000000000230024C0000000087
-:10217000023002E40000FFFF0630200000000800EB
-:1021800002338BC000000001023380000000001AFF
-:10219000023380400000004E0233808000000010B7
-:1021A000023380C0000000200C3383000007A12010
-:1021B0000A338300000001380B33830000001388CA
-:1021C0000A338340000000000C338340000001F418
-:1021D0000B33834000000005023383800007A120F9
-:1021E000023383C0000001F406322A88000000C2D6
-:1021F00006322008000000C806322000000000025D
-:10220000063223E80000004004322E580004037A0E
-:10221000063250A000000004063250B80000000250
-:102220000632508000000006043250980002037EFF
-:10223000063250000000002006323000000004008A
-:1022400006321C0000000004043218300002038033
-:10225000063224E8000000B402322DB00000000075
-:1022600006324000000000B40632300000000020BA
-:10227000063231000000002006323200000000204B
-:102280000632330000000020063234000000002037
-:102290000632350000000020063236000000002023
-:1022A000063237000000002006323800000000200F
-:1022B000063239000000002006323A0000000020FB
-:1022C00006323B000000002006323C0000000020E7
-:1022D00006323D000000002006323E0000000020D3
-:1022E00006323F000000002006321C1000000002F1
-:1022F000063245A000000024063227B8000000B4D2
-:1023000002322DB400000000063242D0000000B4BA
-:1023100006323080000000200632318000000020AC
-:102320000632328000000020063233800000002098
-:102330000632348000000020063235800000002084
-:102340000632368000000020063237800000002070
-:10235000063238800000002006323980000000205C
-:1023600006323A800000002006323B800000002048
-:1023700006323C800000002006323D800000002034
-:1023800006323E800000002006323F800000002020
-:1023900006321C20000000020632463000000024F5
-:1023A0000720040000870000082007800010038237
-:1023B0000724000031A500000724800008190C6ADA
-:1023C00008248EB06C9003840120000000000000FF
-:1023D00001200004000000000120000800000000AF
-:1023E0000120000C0000000001200010000000008F
-:1023F0000120001400000000022000200000000165
-:102400000220002400000002022000280000000337
-:102410000220002C00000000022000300000000418
-:1024200002200034000000010220003800000000FB
-:102430000220003C000000010220004000000004D7
-:1024400002200044000000000220004800000001BB
-:102450000220004C00000003022000500000000099
-:102460000220005400000001022000580000000477
-:102470000220005C0000000002200060000000015B
-:102480000220006400000003022000680000000039
-:102490000220006C00000001022000700000000417
-:1024A00002200074000000000220007800000004F8
-:1024B0000220007C000000030620008000000002D3
-:1024C000022000A400003FFF022000A8000003FF3C
-:1024D000022002240000000002200234000000005C
-:1024E0000220024C00000000022002E40000FFFF76
-:1024F000062020000000080002238BC0000000011D
-:10250000022380000000001002238040000000121F
-:102510000223808000000030022380C00000000EF3
-:102520000C2383000007A1200A2383000000013848
-:102530000B238300000013880A238340000000005F
-:102540000C238340000001F40B23834000000005AE
-:10255000022383800007A120022383C0000001F42E
-:10256000062250000000004206222008000000C899
-:10257000062220000000000206224000000000C6E3
-:1025800004224318000503860622432C0000000B9A
-:10259000042243580005038B0622436C0000000B05
-:1025A0000422439800050390062243AC0000000B70
-:1025B000042243D800050395062243EC0000000BDB
-:1025C000042244180005039A0622442C0000000B44
-:1025D000042244580005039F0622446C0000000BAF
-:1025E00004224498000503A4062244AC0000000B1A
-:1025F000042244D8000503A9062244EC0000000B85
-:1026000004224518000503AE0622452C0000000BED
-:1026100004224558000503B30622456C0000000B58
-:1026200004224598000503B8062245AC0000000BC3
-:10263000042245D8000503BD062245EC0000000B2E
-:1026400004224618000503C20622462C0000000B97
-:1026500004224658000503C70622466C0000000B02
-:1026600004224698000503CC062246AC0000000B6D
-:10267000042246D8000503D1062246EC0000000BD8
-:1026800004224718000503D60622472C0000000B41
-:1026900004224758000503DB0622476C0000000BAC
-:1026A00004224798000503E0062247AC0000000B17
-:1026B000042247D8000503E5062247EC0000000B82
-:1026C00004224818000503EA0622482C0000000BEB
-:1026D00004224858000503EF0622486C0000000B56
-:1026E00004224898000503F4062248AC0000000BC1
-:1026F000042248D8000503F9062248EC0000000B2C
-:1027000004224918000503FE0622492C0000000B94
-:1027100004224958000504030622496C0000000BFE
-:102720000422499800050408062249AC0000000B69
-:10273000042249D80005040D062249EC0000000BD4
-:1027400004224A180005041206224A2C0000000B3D
-:1027500004224A580005041706224A6C0000000BA8
-:1027600004224A980005041C06224AAC0000000B13
-:1027700004224AD80005042106224AEC0000000584
-:1027800006224B000000001704224B5C00010426C7
-:1027900006224B600000000304224B6C000104275A
-:1027A000062238000000004006223000000002002F
-:1027B000042251C00004042806221000000000C0BA
-:1027C000062215C00000024004221EC80008042C86
-:1027D0000622390000000008022251180000000003
-:1027E000062251D00000000606221300000000025D
-:1027F00006221410000000300622392000000008D4
-:102800000222511C00000000062251E800000006D0
-:102810000622130800000002062214D00000003037
-:102820000216100000000028021700080000000235
-:102830000217002C000000030217003C00000004F7
-:1028400002170044000000000217004800000002C8
-:102850000217004C0000009002170050000000908A
-:102860000217005400800090021700580810000062
-:10287000021700600000008A021700640000008058
-:1028800002170068000000810217006C0000008041
-:10289000021700700000000602170078000007D041
-:1028A0000217007C0000076C02170038007C10043F
-:1028B000021700040000000F06164024000000026A
-:1028C000021640700000001C0216420800000001C1
-:1028D0000216421000000001021642200000000112
-:1028E00002164228000000010216423000000001DA
-:1028F000021642380000000102164260000000018A
-:102900000C16401C0003D0900A16401C0000009CCE
-:102910000B16401C000009C40216403000000008DD
-:10292000021640340000000C02164038000000106F
-:102930000216404400000020021640000000000182
-:10294000021640D8000000010216400800000001F5
-:102950000216400C000000010216401000000001A9
-:10296000021642400000000002164248000000002B
-:1029700006164270000000020216425000000000DD
-:1029800002164258000000000616428000000002B5
-:1029900002166008000006140216600C0000060013
-:1029A00002166010000006040216601C0000FFFF03
-:1029B000021660200000FFFF021660240000FFFFE7
-:1029C000021660280000FFFF021660380000002099
-:1029D0000216603C00000020061660400000000265
-:1029E00002166048000000230216604C000000241C
-:1029F00002166050000000250216605400000026F8
-:102A000002166058000000270216605C00000029D2
-:102A1000021660600000002A021660640000002BAD
-:102A2000021660680000002C0216606C0000002D89
-:102A30000616607000000012021660B80000000167
-:102A4000021660BC00000001061660C00000003ED7
-:102A5000021661B800000001061661BC0000001FEC
-:102A60000216623807FFFFFF0216623C0000003FBB
-:102A70000216624007FFFFFF021662440000000FCB
-:102A800001166248000000000116624C00000000C0
-:102A900001166250000000000116625400000000A0
-:102AA00001166258000000000116625C0000000080
-:102AB0000116626000000000011662640000000060
-:102AC00001166268000000000116626C0000000040
-:102AD0000116627000000000011662740000000020
-:102AE00001166278000000000116627C0000000000
-:102AF000021664BC000000010C166000000003E830
-:102B00000A166000000000010B1660000000000AB9
-:102B100002168040000000060216804400000005F6
-:102B2000021680480000000A0216804C00000005D2
-:102B30000216805400000002021680CC000000043F
-:102B4000021680D000000004021680D400000004A9
-:102B5000021680D800000004021680DC0000000489
-:102B6000021680E000000004021680E40000000469
-:102B7000021680E800000004021688040000000429
-:102B8000021680300000007C021680340000003DF8
-:102B9000021680380000003F0216803C0000009CB6
-:102BA000021680F000000007061680F40000000501
-:102BB0000216880C010101010216810800000000C4
-:102BC0000216810C000000040216811000000004AF
-:102BD0000216811400000002021688100801200469
-:102BE00002168118000000050216811C0000000575
-:102BF0000216812000000005021681240000000555
-:102C00000216882C200810010216812800000008F6
-:102C10000216812C00000006021681300000000719
-:102C200002168134000000000216883001010120E4
-:102C300006168138000000040216883401010101E3
-:102C400006168148000000040216883801010101BF
-:102C500006168158000000040216883C010101019B
-:102C6000061681680000000302168174000000014E
-:102C7000021688400101010102168178000000015E
-:102C80000216817C00000001021681800000000114
-:102C9000021681840000000102168844010101012E
-:102CA00002168188000000010216818C00000004D9
-:102CB00002168190000000040216819400000002B8
-:102CC00002168848080120040216819800000005B9
-:102CD0000216819C00000005021681A0000000057C
-:102CE000021681A4000000050216881420081001B5
-:102CF000021681A800000008021681AC0000000640
-:102D0000021681B000000007021681B40000000125
-:102D10000216881801010120021681B80000000186
-:102D2000021681BC00000001021681C000000001F3
-:102D3000021681C4000000010216881C0101010175
-:102D4000021681C800000001021681CC00000001BB
-:102D5000021681D000000001021681D4000000019B
-:102D60000216882001010101021681D8000000012D
-:102D7000021681DC00000001021681E00000000163
-:102D8000021681E4000000010216882401010101FD
-:102D9000021681E800000001021681EC000000012B
-:102DA000021681F0000000010216882801010101CD
-:102DB00002168240FFFF003F061682440000000218
-:102DC0000216824CFFFF003F0216825000000100F5
-:102DD000021682540000010006168258000000020C
-:102DE00002168260000000C002168264000000C06B
-:102DF0000216826800001E000216826C00001E008F
-:102E0000021682700000400002168274000040002A
-:102E100002168278000080000216827C000080008A
-:102E2000021682800000200002168284000020002A
-:102E30000616828800000007021682A40000000126
-:102E4000061682A80000000A021681F400000C0891
-:102E5000021681F800000040021681FC000001000B
-:102E600002168200000000200216820400000017F3
-:102E700002168208000000800216820C0000020088
-:102E8000021682100000000002168218FFFF01FFE8
-:102E900002168214FFFF01FF0216823C000000139D
-:102EA000021680900000013F021680600000014081
-:102EB00002168064000001400616806800000002CF
-:102EC00002168070000000C0061680740000000723
-:102ED0000216809C00000048021680A000000048F6
-:102EE000061680A400000002021680AC0000004814
-:102EF000061680B00000000702168238000080002D
-:102F000002168234000025E40216809400007FFF40
-:102F100002168220000000070216821C0000000733
-:102F2000021682280000000002168224FFFFFFFF25
-:102F300002168230000000000216822CFFFFFFFF05
-:102F4000021680EC000000FF0214000000000001E7
-:102F50000214000C000000010214004000000001F7
-:102F60000214004400007FFF0214000C0000000067
-:102F700002140000000000000214006C00000000B9
-:102F800002140004000000010214003000000001DF
-:102F900002140004000000000214005C00000000A5
-:102FA00002140008000000010214003400000001B7
-:102FB000021400080000000002140060000000007D
-:102FC00006028000000020000202005800000032CB
-:102FD000020200A003150020020200A40315002035
-:102FE000020200A801000030020200AC081000003C
-:102FF000020200B000000033020200B40000003002
-:10300000020200B800000031020200BC0000000310
-:10301000020200C000000006020200C4000000031B
-:10302000020200C800000003020200CC00000002FF
-:10303000020200D000000000020200D400000002E2
-:10304000020200DC00000000020200E000000006B6
-:10305000020200E400000004020200E80000000296
-:10306000020200EC00000002020200F00000000179
-:10307000020200FC00000006020201200000000025
-:103080000202013400000002020201B0000000014F
-:103090000202020C00000001020202140000000102
-:1030A00002020218000000020202040400000001F3
-:1030B0000202040C00000040020204100000004064
-:1030C0000202041C00000004020204200000002090
-:1030D0000202042400000002020204280000001F73
-:1030E00006020500000000120402048000200434DF
-:1030F000020200600000000F0202006400000007EE
-:1031000002020068000000000202006C0000000ED5
-:103110000602007000000004020200F40000000437
-:103120000202000400000001020200080000000189
-:103130000202000C00000001020200100000000169
-:103140000202001400000001020200180000000149
-:103150000202001C00000001020200200000000129
-:103160000202002400000001020200280000000109
-:103170000202002C000000010202003000000001E9
-:1031800002020034000000010202003800000001C9
-:103190000202003C000000010202004000000001A9
-:1031A0000202004400000001020200480000000189
-:1031B0000202004C00000001020200500000000169
-:1031C00002020108000000C802020118000000020B
-:1031D000020201C400000000020201CC0000000055
-:1031E000020201D400000002020201DC0000000221
-:1031F000020201E4000000FF020201EC000000FFF7
-:103200000202010C000000C80202011C00000002C2
-:10321000020201C800000000020201D0000000000C
-:10322000020201D800000002020201E000000002D8
-:10323000020201E8000000FF020201F0000000FFAE
-:1032400007280400008D00000828076800130454B4
-:10325000072C000033FC0000072C800038B20D0062
-:10326000072D000039171B2D072D800005D9297364
-:10327000082D8A204EBC04560128000000000000E2
-:1032800001280004000000000128000800000000E0
-:103290000128000C000000000128001000000000C0
-:1032A0000128001400000000022800200000000196
-:1032B0000228002400000002022800280000000369
-:1032C0000228002C0000000002280030000000044A
-:1032D000022800340000000102280038000000002D
-:1032E0000228003C00000001022800400000000409
-:1032F00002280044000000000228004800000001ED
-:103300000228004C000000030228005000000000CA
-:1033100002280054000000010228005800000004A8
-:103320000228005C0000000002280060000000018C
-:10333000022800640000000302280068000000006A
-:103340000228006C00000001022800700000000448
-:103350000228007400000000022800780000000429
-:103360000228007C00000003062800800000000204
-:10337000022800A400003FFF022800A8000003FF6D
-:10338000022802240000000002280234000000008D
-:103390000228024C00000000022802E40000FFFFA7
-:1033A0000628200000000800022B8BC0000000014E
-:1033B000022B800000000000022B8040000000185B
-:1033C000022B80800000000C022B80C000000066F1
-:1033D0000C2B83000007A1200A2B8300000001387A
-:1033E0000B2B8300000013880A2B83400000000091
-:1033F0000C2B8340000001F40B2B834000000005E0
-:10340000022B83800007A120022B83C0000001F45F
-:10341000062A3D4800000004042A3D5800020458D2
-:10342000062A3D6000000006062A30000000004821
-:10343000062A2008000000C8062A2000000000021A
-:10344000062A31280000008E062A33680000000397
-:10345000042A33740001045A062A3A780000000254
-:10346000042A3A800002045B042A3A700002045DD8
-:10347000042A3E280002045F042A3EB000040461CE
-:10348000042A250000020465062A25080000010020
-:10349000062A297000000004042A29600004046739
-:1034A000042A2F480002046B062A3378000000D853
-:1034B000022A3A3800000000062A3A88000000324A
-:1034C000042A3D880010046D062A502000000002E6
-:1034D000062A503000000002062A500000000002B8
-:1034E000062A501000000002022A50B80000000115
-:1034F000062A50480000000E042A3D780002047D90
-:10350000062A3C1800000026022A50400000000055
-:10351000062A36D8000000D8022A3A3C00000000F3
-:10352000062A3B5000000032042A3DC80010047FE8
-:10353000062A502800000002062A50380000000227
-:10354000062A500800000002062A50180000000257
-:10355000022A50BC00000001062A50800000000E24
-:10356000042A3D800002048F062A3CB00000002699
-:10357000022A504400000000021010080000000160
-:103580000210101000000264021010000003D000AE
-:10359000021010040000003D091018000200049100
-:1035A00009101100001006910610114000000008DB
-:1035B00009101160000806A1061011800000000229
-:1035C00009101188000606A9061011A000000018B5
-:1035D000021010100000000006102400000000E09F
-:1035E0000210201C0000000002102020000000013A
-:1035F000021020C0000000010210200400000001A1
-:10360000021020080000000109103C00000506AF70
-:1036100009103C20000506B409103800000506B961
-:1036200002104028000000100210404400003FFF3C
-:103630000210405800280000021040840084924A82
-:1036400006104C000000010002104058000000006D
-:103650000610806800000004021080000000108046
-:1036600006108028000000020210803800000010C0
-:10367000021080400000FFFF021080440000FFFFA6
-:1036800002108050000000000210810000000000C5
-:10369000061081200000000202108008000002B520
-:1036A0000210801000000000061082000000004A96
-:1036B000021081080001FFFF061081400000000297
-:1036C0000210800000001A80061090000000002404
-:1036D000061091200000004A061093700000004A76
-:1036E000061095C00000004A0210800400001080FF
-:1036F00006108030000000020210803C0000001024
-:10370000021080480000FFFF0210804C0000FFFF05
-:10371000021080540000000002108104000000002C
-:1037200006108128000000020210800C000002B583
-:103730000210801400000000061084000000004AFF
-:103740000210810C0001FFFF0610814800000002FA
-:103750000210800400001A800610909000000024DF
-:10376000061092480000004A061094980000004A93
-:10377000061096E80000004A0212049000E383401D
-:103780000212051400003C10021205200000000285
-:1037900002120494FFFFFFFF02120498FFFFFFFFD5
-:1037A0000212049CFFFFFFFF021204A0FFFFFFFFB5
-:1037B000021204A4FFFFFFFF021204A8FFFFFFFF95
-:1037C000021204ACFFFFFFFF021204B0FFFFFFFF75
-:1037D000021204B8FFFFFFFF021204BCFFFFFFFF4D
-:1037E000021204C0FFFFFFFF021204C4FFFFFFFF2D
-:1037F000021204C8FFFFFFFF021204CCFFFFFFFF0D
-:10380000021204D0FFFFFFFF021204DCFFFFFFFFE4
-:10381000021204E0FFFFFFFF021204E4FFFFFFFFBC
-:10382000021204E8FFFFFFFF021204ECFFFFFFFF9C
-:10383000021204F0FFFFFFFF021204F4FFFFFFFF7C
-:10384000021204F8FFFFFFFF021204FCFFFFFFFF5C
-:1038500002120500FFFFFFFF02120504FFFFFFFF3A
-:1038600002120508FFFFFFFF0212050CFFFFFFFF1A
-:1038700002120510FFFFFFFF021204D4FFFF3330D6
-:10388000021204D8FFFF3340021204B4F0003000EB
-:1038900002120390000000080212039C00000008BE
-:1038A000061203A000000002021203BC0000000484
-:1038B000021203C400000004021203D00000000042
-:1038C000021203DC000000000212036C0000000181
-:1038D000021203680000003F021201BC0000004019
-:1038E000021201C000001808021201C400000803FF
-:1038F000021201C800000803021201CC00000040BF
-:10390000021201D000000003021201D400000803DB
-:10391000021201D800000803021201DC00000803B3
-:10392000021201E000010003021201E4000008039A
-:10393000021201E800000803021201EC000000037B
-:10394000021201F000000003021201F40000000363
-:10395000021201F800000003021201FC0000000343
-:103960000212020000000003021202040000000321
-:1039700002120208000000030212020C0000000301
-:1039800002120210000000030212021400000003E1
-:1039900002120218000000030212021C00000003C1
-:1039A00002120220000000030212022400000003A1
-:1039B00002120228000024030212022C0000002F31
-:1039C0000212023000000009021202340000001945
-:1039D00002120238000001840212023C000001833E
-:1039E0000212024000000306021202440000001905
-:1039F00002120248000000060212024C00000306F8
-:103A000002120250000003060212025400000306D4
-:103A10000212025800000C860212025C000003062B
-:103A20000212026000000306021202640000000697
-:103A300002120268000000060212026C000000067A
-:103A4000021202700000000602120274000000065A
-:103A500002120278000000060212027C000000063A
-:103A6000021202800000000602120284000000061A
-:103A700002120288000000060212028C00000006FA
-:103A800002120290000000060212029400000006DA
-:103A900002120298000000060212029C00000006BA
-:103AA000021202A000000306021202A4000000138A
-:103AB000021202A800000006021202B00000100468
-:103AC000021202B400001004021203240010644029
-:103AD0000212032800106440021201B0000000012D
-:103AE0000600A000000000160200A06CBF5C0000F1
-:103AF0000200A070FFF51FEF0200A0740000FFFF9E
-:103B00000200A078F00003E00200A07C00000000AA
-:103B10000200A0800000A0000600A08400000005B4
-:103B20000200A0980FE000000600A09C0000001416
-:103B30000200A0EC555400000200A0F05555555568
-:103B40000200A0F4000055550200A0F8F0000000AB
-:103B50000200A0FC555400000200A1005555555527
-:103B60000200A104000055550200A108F000000069
-:103B70000600A22C000000040200A0600000030761
-:103B80000200A10CBF5C00000200A110FFF51FEFB6
-:103B90000200A1140000FFFF0200A118F00003E0E2
-:103BA0000200A11C000000000200A1200000A000F3
-:103BB0000600A124000000050200A1380FE000006B
-:103BC0000600A13C000000140200A18C5554000026
-:103BD0000200A190555555550200A194000055557D
-:103BE0000200A198F00000000200A19C55540000C2
-:103BF0000200A1A0555555550200A1A4000055553D
-:103C00000200A1A8F00000000600A23C0000000491
-:103C10000200A06400000307000000000000000094
-:103C20000000002E00000000000000000000000066
-:103C30000000000000000000000000000000000084
-:103C40000000000000000000000000000000000074
-:103C50000000000000000000000000000000000064
-:103C60000000000000000000000000000000000054
-:103C70000000000000000000002E004D00000000C9
-:103C80000000000000000000000000000000000034
-:103C90000000000000000000000000000000000024
-:103CA00000000000004D008B00000000000000003C
-:103CB0000000000000000000000000000000000004
-:103CC00000000000000000000000000000000000F4
-:103CD000008B009000900094009400980000000079
-:103CE00000000000000000000000000000000000D4
-:103CF000000000000000000000000000009802DE4C
-:103D000002DE02E802E802F200000000000000000B
-:103D100000000000000000000000000000000000A3
-:103D20000000000000000000000000000000000093
-:103D30000000000000000000000000000000000083
-:103D40000000000000000000000000000000000073
-:103D50000000000000000000000000000000000063
-:103D60000000000000000000000000000000000053
-:103D70000000000000000000000000000000000043
-:103D80000000000000000000000000000000000033
-:103D90000000000000000000000000000000000023
-:103DA0000000000000000000000000000000000013
-:103DB0000000000000000000000000000000000003
-:103DC00000000000000000000000000000000000F3
-:103DD000000000000000000002F202FA00000000F3
-:103DE00000000000000000000000000000000000D3
-:103DF00000000000000000000000000000000000C3
-:103E000000000000000000000000000000000000B2
-:103E100000000000000000000000000000000000A2
-:103E20000000000000000000000000000000000092
-:103E300002FA02FF02FF030A030A03150000000052
-:103E40000000000000000000000000000000000072
-:103E50000000000000000000000000000000000062
-:103E60000000000000000000000000000000000052
-:103E70000000000000000000000000000000000042
-:103E80000000000000000000031503160000000001
-:103E90000000000000000000000000000000000022
-:103EA0000000000000000000000000000000000012
-:103EB000000000000316035700000000000000008F
-:103EC00000000000000000000000000000000000F2
-:103ED00000000000000000000000000000000000E2
-:103EE0000357037B000000000000000000000000FA
-:103EF00000000000000000000000000000000000C2
-:103F0000000000000000000000000000037B03BB75
-:103F100000000000000000000000000000000000A1
-:103F20000000000000000000000000000000000091
-:103F3000000000000000000003BB03F700000000C9
-:103F40000000000000000000000000000000000071
-:103F50000000000000000000000000000000000061
-:103F60000000000003F7043D043D045204520467BE
-:103F70000000000000000000000000000000000041
-:103F80000000000000000000000000000000000031
-:103F9000046704ED04ED04F204F204F700000000ED
-:103FA0000000000000000000000000000000000011
-:103FB00000000000000000000000000004F704F80A
-:103FC00000000000000000000000000000000000F1
-:103FD00000000000000000000000000000000000E1
-:103FE000000000000000000004F8050A00000000C6
-:103FF00000000000000000000000000000000000C1
-:1040000000000000000000000000000000000000B0
-:1040100000000000050A051F051F052205220525D1
-:104020000000000000000000000000000000000090
-:104030000000000000000000000000000000000080
-:1040400005250555000000000000000000000000EC
-:104050000000000000000000000000000000000060
-:10406000000000000000000000000000055505DC15
-:104070000000000000000000000000000000000040
-:104080000000000000000000000000000000000030
-:10409000000000000000000005DC05E305E305E783
-:1040A00005E705EB00000000000000000000000034
-:1040B0000000000000000000000000000000000000
-:1040C0000000000005EB062B062B06330633063BEB
-:1040D00000000000000000000000000000000000E0
-:1040E00000000000000000000000000000000000D0
-:1040F000063B068806880695069506A20000000085
-:1041000000000000000000000000000000000000AF
-:1041100000000000000000000000000006A206AE43
-:10412000000000000000000000000000000000008F
-:10413000000000000000000000000000000000007F
-:10414000000000000000000006AE06B40000000001
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:104170000000000006B406B70000000000000000C8
-:10418000000000000000000000000000000000002F
-:10419000000000000000000000000000000000001F
-:1041A00006B706BD0000000000000000000000008F
-:1041B00000000000000000000000000000000000FF
-:1041C00000000000000000000000000006BD06BE68
-:1041D00006BE06D006D006E2000000000000000087
-:1041E00000000000000000000000000000000000CF
-:1041F000000000000000000006E2074F0000000081
-:1042000000000000000000000000000000000000AE
-:10421000000000000000000000000000000000009E
-:1042200000000000074F0750075007630763077639
-:10423000000000000000000000000000000000007E
-:10424000000000000000000000000000000000006E
-:10425000000000000000000000000000000000005E
-:10426000000000000000000000000000000000004E
-:10427000000000000000000000000000000000003E
-:10428000000000000000000000000000000000002E
-:10429000000000000000000000000000000000001E
-:1042A000000000000000000000000000000000000E
-:1042B00000000000000000000000000000000000FE
-:1042C00000000000000000000000000000000000EE
-:1042D00000000000000000000000000000000000DE
-:1042E00000000000000000000000000000000000CE
-:1042F00000000000000000000000000000000000BE
-:1043000000000000000000000000000000000000AD
-:10431000000000000000000000000000000000009D
-:10432000000000000000000000000000000000008D
-:1043300000010000000204C00003098000040E40D8
-:1043400000051300000617C000071C80000821406C
-:1043500000092600000A2AC0000B2F80000C344000
-:10436000000D3900000E3DC0000F42800010474094
-:1043700000114C00001250C00013558000145A4028
-:1043800000155F00001663C00017688000186D40BC
-:1043900000197200001A76C0001B7B80001C804050
-:1043A000001D8500001E89C0001F8E800000934004
-:1043B00000002000000040000000600000008000BD
-:1043C0000000A0000000C0000000E00000010000AC
-:1043D0000001200000014000000160000001800099
-:1043E0000001A0000001C0000001E0000002000088
-:1043F0000002200000024000000260000002800075
-:104400000002A0000002C0000002E0000003000063
-:104410000003200000034000000360000003800050
-:104420000003A0000003C0000003E000000400003F
-:10443000000420000004400000046000000480002C
-:104440000004A0000004C0000004E000000500001B
-:104450000005200000054000000560000005800008
-:104460000005A0000005C0000005E00000060000F7
-:1044700000062000000640000006600000068000E4
-:104480000006A0000006C0000006E00000070000D3
-:1044900000072000000740000007600000078000C0
-:1044A0000007A0000007C0000007E00000080000AF
-:1044B000000820000008400000086000000880009C
-:1044C0000008A0000008C0000008E000000900008B
-:1044D0000009200000094000000960000009800078
-:1044E0000009A0000009C0000009E000000A000067
-:1044F000000A2000000A4000000A6000000A800054
-:10450000000AA000000AC000000AE000000B000042
-:10451000000B2000000B4000000B6000000B80002F
-:10452000000BA000000BC000000BE000000C00001E
-:10453000000C2000000C4000000C6000000C80000B
-:10454000000CA000000CC000000CE000000D0000FA
-:10455000000D2000000D4000000D6000000D8000E7
-:10456000000DA000000DC000000DE000000E0000D6
-:10457000000E2000000E4000000E6000000E8000C3
-:10458000000EA000000EC000000EE000000F0000B2
-:10459000000F2000000F4000000F6000000F80009F
-:1045A000000FA000000FC000000FE000001000008E
-:1045B000001020000010400000106000001080007B
-:1045C0000010A0000010C0000010E000001100006A
-:1045D0000011200000114000001160000011800057
-:1045E0000011A0000011C0000011E0000012000046
-:1045F0000012200000124000001260000012800033
-:104600000012A0000012C0000012E0000013000021
-:10461000001320000013400000136000001380000E
-:104620000013A0000013C0000013E00000140000FD
-:1046300000142000001440000014600000148000EA
-:104640000014A0000014C0000014E00000150000D9
-:1046500000152000001540000015600000158000C6
-:104660000015A0000015C0000015E00000160000B5
-:1046700000162000001640000016600000168000A2
-:104680000016A0000016C0000016E0000017000091
-:10469000001720000017400000176000001780007E
-:1046A0000017A0000017C0000017E000001800006D
-:1046B000001820000018400000186000001880005A
-:1046C0000018A0000018C0000018E0000019000049
-:1046D0000019200000194000001960000019800036
-:1046E0000019A0000019C0000019E000001A000025
-:1046F000001A2000001A4000001A6000001A800012
-:10470000001AA000001AC000001AE000001B000000
-:10471000001B2000001B4000001B6000001B8000ED
-:10472000001BA000001BC000001BE000001C0000DC
-:10473000001C2000001C4000001C6000001C8000C9
-:10474000001CA000001CC000001CE000001D0000B8
-:10475000001D2000001D4000001D6000001D8000A5
-:10476000001DA000001DC000001DE000001E000094
-:10477000001E2000001E4000001E6000001E800081
-:10478000001EA000001EC000001EE000001F000070
-:10479000001F2000001F4000001F6000001F80005D
-:1047A000001FA000001FC000001FE000002000004C
-:1047B0000020200000204000002060000020800039
-:1047C0000020A0000020C0000020E0000021000028
-:1047D0000021200000214000002160000021800015
-:1047E0000021A0000021C0000021E0000022000004
-:1047F00000222000002240000022600000228000F1
-:104800000022A0000022C0000022E00000230000DF
-:1048100000232000002340000023600000238000CC
-:104820000023A0000023C0000023E00000240000BB
-:1048300000242000002440000024600000248000A8
-:104840000024A0000024C0000024E0000025000097
-:104850000025200000254000002560000025800084
-:104860000025A0000025C0000025E0000026000073
-:104870000026200000264000002660000026800060
-:104880000026A0000026C0000026E000002700004F
-:10489000002720000027400000276000002780003C
-:1048A0000027A0000027C0000027E000002800002B
-:1048B0000028200000284000002860000028800018
-:1048C0000028A0000028C0000028E0000029000007
-:1048D00000292000002940000029600000298000F4
-:1048E0000029A0000029C0000029E000002A0000E3
-:1048F000002A2000002A4000002A6000002A8000D0
-:10490000002AA000002AC000002AE000002B0000BE
-:10491000002B2000002B4000002B6000002B8000AB
-:10492000002BA000002BC000002BE000002C00009A
-:10493000002C2000002C4000002C6000002C800087
-:10494000002CA000002CC000002CE000002D000076
-:10495000002D2000002D4000002D6000002D800063
-:10496000002DA000002DC000002DE000002E000052
-:10497000002E2000002E4000002E6000002E80003F
-:10498000002EA000002EC000002EE000002F00002E
-:10499000002F2000002F4000002F6000002F80001B
-:1049A000002FA000002FC000002FE000003000000A
-:1049B00000302000003040000030600000308000F7
-:1049C0000030A0000030C0000030E00000310000E6
-:1049D00000312000003140000031600000318000D3
-:1049E0000031A0000031C0000031E00000320000C2
-:1049F00000322000003240000032600000328000AF
-:104A00000032A0000032C0000032E000003300009D
-:104A1000003320000033400000336000003380008A
-:104A20000033A0000033C0000033E0000034000079
-:104A30000034200000344000003460000034800066
-:104A40000034A0000034C0000034E0000035000055
-:104A50000035200000354000003560000035800042
-:104A60000035A0000035C0000035E0000036000031
-:104A7000003620000036400000366000003680001E
-:104A80000036A0000036C0000036E000003700000D
-:104A900000372000003740000037600000378000FA
-:104AA0000037A0000037C0000037E00000380000E9
-:104AB00000382000003840000038600000388000D6
-:104AC0000038A0000038C0000038E00000390000C5
-:104AD00000392000003940000039600000398000B2
-:104AE0000039A0000039C0000039E000003A0000A1
-:104AF000003A2000003A4000003A6000003A80008E
-:104B0000003AA000003AC000003AE000003B00007C
-:104B1000003B2000003B4000003B6000003B800069
-:104B2000003BA000003BC000003BE000003C000058
-:104B3000003C2000003C4000003C6000003C800045
-:104B4000003CA000003CC000003CE000003D000034
-:104B5000003D2000003D4000003D6000003D800021
-:104B6000003DA000003DC000003DE000003E000010
-:104B7000003E2000003E4000003E6000003E8000FD
-:104B8000003EA000003EC000003EE000003F0000EC
-:104B9000003F2000003F4000003F6000003F8000D9
-:104BA000003FA000003FC000003FE000003FE001E8
-:104BB00000000000000001FF0000020000007FF87C
-:104BC00000007FF80000016A0000150000000001ED
-:104BD0000000FF00000000000000FF0000000000D7
-:104BE00000000000140AFF000000000100000000A7
-:104BF00000201001000000000100860000000100FC
-:104C00000000860200008604000086060000860878
-:104C10000000860A0000860C0000860E0000861048
-:104C20000000861200008614000086160000861818
-:104C30000000861A0000861C0000861E00008620E8
-:104C400000008622000086240000862600008628B8
-:104C50000000862A0000862C0000862E0000863088
-:104C60000000863200008634000086360000863858
-:104C70000000863A0000863C0000863E0000864028
-:104C800000008642000086440000864600008648F8
-:104C90000000864A0000864C0000864E00008650C8
-:104CA0000000865200008654000086560000865898
-:104CB0000000865A0000865C0000865E0000866068
-:104CC0000000866200008664000086660000866838
-:104CD0000000866A0000866C0000866E0000867008
-:104CE00000008672000086740000867600008678D8
-:104CF0000000867A0000867C0000867E00008680A8
-:104D00000000868200008684000086860000868877
-:104D10000000868A0000868C0000868E0000869047
-:104D20000000869200008694000086960000869817
-:104D30000000869A0000869C0000869E000086A0E7
-:104D4000000086A2000086A4000086A6000086A8B7
-:104D5000000086AA000086AC000086AE000086B087
-:104D6000000086B2000086B4000086B6000086B857
-:104D7000000086BA000086BC000086BE000086C027
-:104D8000000086C2000086C4000086C6000086C8F7
-:104D9000000086CA000086CC000086CE000086D0C7
-:104DA000000086D2000086D4000086D6000086D897
-:104DB000000086DA000086DC000086DE000086E067
-:104DC000000086E2000086E4000086E6000086E837
-:104DD000000086EA000086EC000086EE000086F007
-:104DE000000086F2000086F4000086F6000086F8D7
-:104DF000000086FA000086FC000086FE00008700A6
-:104E00000000870200008704000087060000870872
-:104E10000000870A0000870C0000870E0000871042
-:104E20000000871200008714000087160000871812
-:104E30000000871A0000871C0000871E00008720E2
-:104E400000008722000087240000872600008728B2
-:104E50000000872A0000872C0000872E0000873082
-:104E60000000873200008734000087360000873852
-:104E70000000873A0000873C0000873E0000874022
-:104E800000008742000087440000874600008748F2
-:104E90000000874A0000874C0000874E00008750C2
-:104EA0000000875200008754000087560000875892
-:104EB0000000875A0000875C0000875E0000876062
-:104EC0000000876200008764000087660000876832
-:104ED0000000876A0000876C0000876E0000877002
-:104EE00000008772000087740000877600008778D2
-:104EF0000000877A0000877C0000877E00008780A2
-:104F00000000878200008784000087860000878871
-:104F10000000878A0000878C0000878E0000879041
-:104F20000000879200008794000087960000879811
-:104F30000000879A0000879C0000879E000087A0E1
-:104F4000000087A2000087A4000087A6000087A8B1
-:104F5000000087AA000087AC000087AE000087B081
-:104F6000000087B2000087B4000087B6000087B851
-:104F7000000087BA000087BC000087BE000087C021
-:104F8000000087C2000087C4000087C6000087C8F1
-:104F9000000087CA000087CC000087CE000087D0C1
-:104FA000000087D2000087D4000087D6000087D891
-:104FB000000087DA000087DC000087DE000087E061
-:104FC000000087E2000087E4000087E6000087E831
-:104FD000000087EA000087EC000087EE000087F001
-:104FE000000087F2000087F4000087F6000087F8D1
-:104FF000000087FA000087FC000087FEFFFFFFFF2C
-:10500000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0
-:10501000FFFFFFFFFFFFFFFFFFFFFFFF0000000399
-:1050200000BEBC20000000000000000500000003DE
-:1050300000BEBC20000000000000000500002000B1
-:10504000000040C000006180000082400000A3001A
-:105050000000C3C00000E4800001054000012600FC
-:10506000000146C000016780000188400001A900DE
-:105070000001C9C00001EA8000020B4000022C00C0
-:1050800000024CC000026D8000028E400002AF00A2
-:105090000002CFC00002F08000001140000080003C
-:1050A000000103800001870000020A8000028E00D8
-:1050B00000031180000395000004188000049C0088
-:1050C00000051F800005A300000626800006AA0038
-:1050D00000072D800007B100000834800008B800E8
-:1050E00000093B800009BF00000A4280000AC60098
-:1050F000000B4980000BCD00000C5080000CD40048
-:10510000000D578000005B0000007FF800007FF872
-:1051100000000166000015000000FF000000000014
-:105120000000FF0000000000000019000000000067
-:1051300000000000FFFFFFFF00007FF800007FF885
-:105140000000035F000035000000FF000FFFFFFFBD
-:105150000000FF000FFFFFFF000000FF0000FF0046
-:105160000FFFFFFF0000FF000FFFFFFF000000FF29
-:105170000000FF000FFFFFFF0000FF000FFFFFFF19
-:10518000000000FF0000FF000FFFFFFF0000FF0016
-:105190000FFFFFFF000000FF0000FF000FFFFFFFF9
-:1051A0000000FF000FFFFFFF000000FF0000FF00F6
-:1051B0000FFFFFFF0000FF000FFFFFFF000000FFD9
-:1051C0000000FF000FFFFFFF0000FF000FFFFFFFC9
-:1051D000000000FF0000FF000FFFFFFF0000FF00C6
-:1051E0000FFFFFFF000000FF0000FF000FFFFFFFA9
-:1051F0000000FF000FFFFFFF000000FF0000FF00A6
-:105200000FFFFFFF0000FF000FFFFFFF000000FF88
-:105210000000FF000FFFFFFF0000FF000FFFFFFF78
-:10522000000000FF0000FF000FFFFFFF0000FF0075
-:105230000FFFFFFF000000FF0000FF000FFFFFFF58
-:105240000000FF000FFFFFFF000000FF0000FF0055
-:105250000FFFFFFF0000FF000FFFFFFF000000FF38
-:105260000000FF000FFFFFFF0000FF000FFFFFFF28
-:10527000000000FF0000FF000FFFFFFF0000FF0025
-:105280000FFFFFFF000000FF0000FF000FFFFFFF08
-:105290000000FF000FFFFFFF000000FF0000FF0005
-:1052A0000FFFFFFF0000FF000FFFFFFF000000FFE8
-:1052B0000000FF000FFFFFFF0000FF000FFFFFFFD8
-:1052C000000000FF0000FF000FFFFFFF0000FF00D5
-:1052D0000FFFFFFF000000FF0000FF000FFFFFFFB8
-:1052E0000000FF000FFFFFFF000000FF0000FF00B5
-:1052F0000FFFFFFF0000FF000FFFFFFF000000FF98
-:105300000000FF000FFFFFFF0000FF000FFFFFFF87
-:10531000000000FF0000FF000FFFFFFF0000FF0084
-:105320000FFFFFFF000000FF0000FF000FFFFFFF67
-:105330000000FF000FFFFFFF000000FF0000FF0064
-:105340000FFFFFFF0000FF000FFFFFFF000000FF47
-:105350000000FF000FFFFFFF0000FF000FFFFFFF37
-:10536000000000FF0000FF000FFFFFFF0000FF0034
-:105370000FFFFFFF000000FF0000FF000FFFFFFF17
-:105380000000FF000FFFFFFF000000FF0000FF0014
-:105390000FFFFFFF0000FF000FFFFFFF000000FFF7
-:1053A0000000FF000FFFFFFF0000FF000FFFFFFFE7
-:1053B000000000FF0000FF000FFFFFFF0000FF00E4
-:1053C0000FFFFFFF000000FF000000FF000000FFD4
-:1053D0000000FF00000000000000FF0000000000CF
-:1053E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
-:1053F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
-:1054000000001000000020800000310000004180FA
-:1054100000005200000062800000730000008380E2
-:10542000000094000000A4800000B5000000C580CA
-:105430000000D6000000E6800000F70000010780B1
-:105440000001180000012880000139000001498096
-:1054500000015A0000016A8000017B0000018B807E
-:1054600000019C000001AC800001BD000001CD8066
-:105470000001DE000001EE8000000F0000000000CF
-:1054800000007FF800007FF80000021A00003500DD
-:1054900010000000000028AD00010001FFFFFFFF29
-:1054A000FFFFFFFF00220006CCCCCCC17058103C9F
-:1054B000000000000000FF00000000000000FF00EE
-:1054C000000000000000000000000001CCCC020140
-:1054D000CCCCCCCCCCCC0201CCCCCCCC00000000D1
-:1054E000FFFFFFFF0000FFFF000000000000FFFFC4
-:1054F000000000000000FFFF000000000000FFFFB0
-:10550000000000000000FFFF000000000000FFFF9F
-:10551000000000000000FFFF000000000000FFFF8F
-:1055200000000000000E0000011600D60000FFFF82
-:10553000000000000000FFFF000000000000FFFF6F
-:10554000000000000000FFFF000000000000FFFF5F
-:10555000000000000000FFFF000000000000FFFF4F
-:10556000000000000000FFFF0000000000720000CB
-:10557000012300F3FFFFFFF3318FFFFF0C30C30C5B
-:10558000C30C30C3CF3CF300F3CF3CF30000CF3C5F
-:10559000CDCDCDCDFFFFFFF130EFFFFF0C30C30CC1
-:1055A000C30C30C3CF3CF300F3CF3CF30001CF3C3E
-:1055B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2C
-:1055C000C30C30C3CF3CF300F3CF3CF30002CF3C1D
-:1055D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C2
-:1055E000C30C30C3CF300014F3CF3CF30004CF3CE6
-:1055F000CDCDCDCDFFFFFFF2304FFFFF0C30C30C00
-:10560000C30C30C3CF3CF300F3CF3CF30008CF3CD6
-:10561000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF7
-:10562000C30C30C3CF3CF300F3CF3CF30010CF3CAE
-:10563000CDCDCDCDFFFFFFF731EFFFFF0C30C30C19
-:10564000C30C30C3CF3CF300F3CF3CF30020CF3C7E
-:10565000CDCDCDCDFFFFFFF5302FFFFF0C30C30CBC
-:10566000C30C30C3CF3CF300F3CF3CF30040CF3C3E
-:10567000CDCDCDCDFFFFFFF3318FFFFF0C30C30C3D
-:10568000C30C30C3CF3CF300F3CF3CF30000CF3C5E
-:10569000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9F
-:1056A000C30C30C3CF3CF300F3CF3CF30001CF3C3D
-:1056B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2B
-:1056C000C30C30C3CF3CF300F3CF3CF30002CF3C1C
-:1056D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C1
-:1056E000C30C30C3CF300014F3CF3CF30004CF3CE5
-:1056F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFF
-:10570000C30C30C3CF3CF300F3CF3CF30008CF3CD5
-:10571000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF6
-:10572000C30C30C3CF3CF300F3CF3CF30010CF3CAD
-:10573000CDCDCDCDFFFFFFF730EFFFFF0C30C30C19
-:10574000C30C30C3CF3CF300F3CF3CF30020CF3C7D
-:10575000CDCDCDCDFFFFFFF5304FFFFF0C30C30C9B
-:10576000C30C30C3CF3CF300F3CF3CF30040CF3C3D
-:10577000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CF1
-:10578000C30C30C3CF3CF3CCF3CF3CF30000CF3C91
-:10579000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CD1
-:1057A000C30C30C3CF3CF3CCF3CF3CF30001CF3C70
-:1057B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CB1
-:1057C000C30C30C3CF3CF3CCF3CF3CF30002CF3C4F
-:1057D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C91
-:1057E000C30C30C3CF3CF3CCF3CF3CF30004CF3C2D
-:1057F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C71
-:10580000C30C30C3CF3CF3CCF3CF3CF30008CF3C08
-:10581000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C50
-:10582000C30C30C3CF3CF3CCF3CF3CF30010CF3CE0
-:10583000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C30
-:10584000C30C30C3CF3CF3CCF3CF3CF30020CF3CB0
-:10585000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C10
-:10586000C30C30C3CF3CF3CCF3CF3CF30040CF3C70
-:10587000CDCDCDCDFFFFFFF3320FFFFF0C30C30CBA
-:10588000C30C30C3CF3CF300F3CF3CF30000CF3C5C
-:10589000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9D
-:1058A000C30C30C3CF3CF300F3CF3CF30001CF3C3B
-:1058B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C29
-:1058C000C30C30C3CF3CF300F3CF3CF30002CF3C1A
-:1058D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BF
-:1058E000C30C30C3CF300014F3CF3CF30004CF3CE3
-:1058F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFD
-:10590000C30C30C3CF3CF300F3CF3CF30008CF3CD3
-:10591000CDCDCDCDFFFFFF8A042FFFFF0C30C30C90
-:10592000C30C30C3CF3CC000F3CF3CF30010CF3CDE
-:10593000CDCDCDCDFFFFFF9705CFFFFF0C30C30CC2
-:10594000C30C30C3CF3CC000F3CF3CF30020CF3CAE
-:10595000CDCDCDCDFFFFFFF5310FFFFF0C30C30CD8
-:10596000C30C30C3CF3CF300F3CF3CF30040CF3C3B
-:10597000CDCDCDCDFFFFFFF3300FFFFF0C30C30CBB
-:10598000C30C30C3CF3CF300F3CF3CF30000CF3C5B
-:10599000CDCDCDCDFFFFFFF1300FFFFF0C30C30C9D
-:1059A000C30C30C3CF3CF300F3CF3CF30001CF3C3A
-:1059B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C28
-:1059C000C30C30C3CF3CF300F3CF3CF30002CF3C19
-:1059D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BE
-:1059E000C30C30C3CF300014F3CF3CF30004CF3CE2
-:1059F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFC
-:105A0000C30C30C3CF3CF300F3CF3CF30008CF3CD2
-:105A1000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF3
-:105A2000C30C30C3CF3CF300F3CF3CF30010CF3CAA
-:105A3000CDCDCDCDFFFFFF97040FFFFF0C30C30C82
-:105A4000C30C30C3CF3CC000F3CF3CF30020CF3CAD
-:105A5000CDCDCDCDFFFFFFF5300FFFFF0C30C30CD8
-:105A6000C30C30C3CF3CF300F3CF3CF30040CF3C3A
-:105A7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEE
-:105A8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8E
-:105A9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCE
-:105AA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6D
-:105AB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAE
-:105AC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4C
-:105AD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8E
-:105AE000C30C30C3CF3CF3CCF3CF3CF30004CF3C2A
-:105AF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6E
-:105B0000C30C30C3CF3CF3CCF3CF3CF30008CF3C05
-:105B1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4D
-:105B2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDD
-:105B3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2D
-:105B4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAD
-:105B5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0D
-:105B6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6D
-:105B7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CED
-:105B8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8D
-:105B9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCD
-:105BA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6C
-:105BB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAD
-:105BC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4B
-:105BD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8D
-:105BE000C30C30C3CF3CF3CCF3CF3CF30004CF3C29
-:105BF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6D
-:105C0000C30C30C3CF3CF3CCF3CF3CF30008CF3C04
-:105C1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4C
-:105C2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDC
-:105C3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2C
-:105C4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAC
-:105C5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0C
-:105C6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6C
-:105C7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEC
-:105C8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8C
-:105C9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCC
-:105CA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6B
-:105CB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAC
-:105CC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4A
-:105CD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8C
-:105CE000C30C30C3CF3CF3CCF3CF3CF30004CF3C28
-:105CF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6C
-:105D0000C30C30C3CF3CF3CCF3CF3CF30008CF3C03
-:105D1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4B
-:105D2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDB
-:105D3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2B
-:105D4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAB
-:105D5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0B
-:105D6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6B
-:105D7000CDCDCDCD000C0000000700C00002813069
-:105D8000000B81580002021000010230000F024097
-:105D900000010330000C0000000800C00002814038
-:105DA000000B81680002022000010240000702503F
-:105DB000000202C000100000000801000002818003
-:105DC000000B81A80002026000018280000E829810
-:105DD0000008038000028000000B8028000200E021
-:105DE000000101000000811000000118CCCCCCCCD7
-:105DF000CCCCCCCCCCCCCCCCCCCCCCCC00002000F3
-:105E0000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCD2
-:105E100000002000CCCCCCCCCCCCCCCCCCCCCCCCD2
-:105E2000CCCCCCCC00002000000000000000000022
-:105E30001F8B080000000000000BFB51CFC0F003D7
-:105E40008A5B591918EC39107C7AE0A58C94E95FCB
-:105E5000C3CCC0B019882F00F12E66D2F57F9642D0
-:105E6000B0CF483030BC03E29D620C0C2B2411E211
-:105E7000D1D20C0CFF81FCD350313BA09EDD52945B
-:105E8000B97B140F0E7C471D957F5C15428740C57A
-:105E9000EFA2C99F80CACF5780D0F7D4B19BBB0077
-:105EA0002A0F0001FE3753600300000000000000CD
-:105EB0001F8B080000000000000BED7D0B7454D513
-:105EC000B9F037E735672633939390C704123C83C4
-:105ED00001820618303C54AA93F068E8A53A3C04C5
-:105EE000E447195034822411D39AB6FC7F4EC8E49B
-:105EF0000102C617A52DDA81E2BDD185BDD1466B61
-:105F0000FB6B5710A5B9B5772DA4A8B4451BD06B72
-:105F1000C10237DA72A1FFB2977F7F7BEF939C7348
-:105F20003293876257EF6AC3D2937DCE7E7CFB7B30
-:105F3000EDEF754E141803CA8D0097F0875CD7B942
-:105F40000020BBEF6ADE073556095900154145DFD1
-:105F50004A9EAD17237A7D09B97F85107E0AF0FE2F
-:105F6000B839300940C671790053F17FD300A4CC11
-:105F7000969C988FDC1357A6E3D59CCFBC5648005F
-:105F8000DA547CBE6D5CB2E7BDEB27E49E6E15E88B
-:105F9000CFA53100B5C76F9DFF9AD926FF8D027F2F
-:105FA000D68757935F66C08C4B22C027F98BD23BB4
-:105FB000F5D4F37D54D7A54963012ED42D9FFFDA84
-:105FC000D8FECFD78B50DD5EDCFFFE75A052BC80C3
-:105FD0006A28D1897DFB5E0FD0E9CE0468CEDFCC84
-:105FE000F69B4590752DB9DFF66F9A54D407E77A82
-:105FF00089F49BDA7F3F00069DD79CA7777CA2CBD4
-:1060000036DE39AE773E3E1E24F26F3A00ED42F6A0
-:106010003FCD15BB11EFBBF3171923497BFDFE5292
-:106020008815A786BF975E9F117E735C4A3AF27E01
-:106030009FEC6B6822AC071F2AAD375D47F8E8F785
-:10604000CF89E1CDC847BBC7CF8100B90F8C8F4C3A
-:106050003A9DDED790938C3F52D1E97F8387F29FA0
-:10606000C95F15C2CAF44EF8ECFC7537F2579A8531
-:10607000BFDA170F38DF67E5AFB893BF383ECEB44D
-:10608000B3FDC3AE118C2E9C5E4EFAA4A4CB671D4B
-:10609000D79F9FB6205EDDED8B8D9190849F38BC9D
-:1060A00026BD3E2FBC83F111402BA5334054C4F5CF
-:1060B000FBEEB3ABB7447381409B87711F23F83E5F
-:1060C00046C49AEE13089C7E682D1F1722EDEED56C
-:1060D0000B500EFCC7E79FC66B6371595719E997C0
-:1060E0001ED616CE23576F11B8709F5B70B2EB703F
-:1060F000BE4AA3B418E905B4FD8C7147C4403C40C6
-:10610000042007E06B7C4F00822E91B682BF8E493F
-:10611000B60F053A193E5C97DCFDC7A7DABFD23748
-:106120000E2E85F0FF1B01F737D8385840C6A988D6
-:106130000E83E23BC3314F7A843D37E9E3074B9B43
-:106140003C3F8ABF507CDFF757594F8347549DA887
-:1061500014A550D012D81FB40C89B4BD7388222264
-:10616000678D16EC31047D70BA340294B7FB28C3F6
-:10617000C1427F1F7CA7C145F7135C130F3591798E
-:10618000CF97F8C2943F34F2DFD4FEFB79B00E19FA
-:10619000D9D22EDE0BC8E771C24763C878A3989C9A
-:1061A00087084FE1F39A555FA5B95C9C2F9DFC01D0
-:1061B000BA341DC50C59855C0B858827F0F9F94365
-:1061C00072E071A8FC91B6C0421F183EBD82DC6E21
-:1061D000182A7F7CDEF54CBAF697AB7A4ED71A15A3
-:1061E0007C782E2F4A6A7FA4A6EB2394AEDE4288E9
-:1061F0002492E8E902978BCB8161D337F44AE823F4
-:10620000F692F77E1BBDC4DCE9CBF70C800F31CBD7
-:106210008E0F735E4FADA87F80CA4BD2049C4FC1D6
-:10622000F990CF828F1840CECFF3C8DB041F62EB0A
-:10623000944E6C432150BB8CFC74BA48DB138C2405
-:10624000B68618FF235D4CF8DCBA60C3AF94E5B5A1
-:10625000B561B9E1B2C2EFA955281C0AB511C83C15
-:106260001A9990A042F24127F2ADC9AFC80697AE85
-:10627000C4F6B76C7CD0A24F85647430F915D1CACE
-:10628000F8F55B43D32FCEF596D8E11DF2389FA4E5
-:106290007F683987528F93E043933E048915388194
-:1062A000850F9A6578C93519A0217F29C4C8DD6694
-:1062B0007C44CEB126BCE6211F4ED5E879D9E692C2
-:1062C000104EF35C856026ED37CDA5D3F904B59A61
-:1062D0009EABA22FC2CE57FE3C355C6CFD1CBD357B
-:1062E000A211FCE6426B4420F4914A20DC09A84745
-:1062F00023807C0061C61722B7D3CDF171CECF1EAB
-:10630000384AC713ED6A68F43CB3CBF15C913C2486
-:10631000F36C2982849BD2A955C5B6542401FA0591
-:10632000443FF9F2A6A39EE63FE28230C29F8EE789
-:106330002BF2C72CCEDF2EA2CF089E7D2576F9F654
-:106340003AE45FE2E7713F7D96C29F30AF4EFBEDCE
-:10635000FB2E6EBFA5818FD29B8F075F727BD5B45A
-:10636000DB4CBC660B40F109BF90134F85F8DE484B
-:106370007BE3BB1909DCB751165DDD48F0609C7406
-:10638000851B909E52A4279D3CFFF09F45EA2F65F8
-:106390002FADBD02D7DB5E678C2DB4D883DB25CD56
-:1063A0008B78DE139FAAC62C7AE66688BDE8B2F821
-:1063B0005FA160D3D8C26B28FF9DEC2EC2A3C2455B
-:1063C000F9CFE38B075F47B9E4F77BF1636D8BFD92
-:1063D000DB59B9C0CE4BB8A93442D66D41DD3592F8
-:1063E0003E365C04CE963CD6FE797D4E299E9F2D8E
-:1063F0007ED6FEA4FEFD483DE58B981A25F76A81FE
-:10640000E3A58BE085D25FCF5D3831355D9CFBDF46
-:10641000211DF6E0FE9FF01D993F1ECFCF99421837
-:10642000D1FE44CD116DB5051F2DEEB2B7111FA3DE
-:1064300020E102A45F3C8BCA4F107A7F22D8CEE3C2
-:10644000F2940F8769BFD1D19E52196F2DD75EC5C7
-:106450006B53F0F90C2A4F3047FB90CABFE8BA746F
-:10646000F5D0E53DD57E032E8826B3E7378A9954CB
-:10647000AE022564DF36BD9EAF517EE4F37E0D692A
-:1064800044F6B72783C04484678FDCBA3C9A84BF44
-:106490007FEE1268BF787C5E742DE533761E8CE645
-:1064A000E741E3E2DBC3C80F50A8E7227D242D4675
-:1064B000F5AD84E707E11F398BE915498DB48C27C9
-:1064C000FC1A3A2A8241C6855A33CA54D40F1A504C
-:1064D000FB05D1B96422DB2F9EAF6EC2712897995C
-:1064E000E47AC9B26F087AFBE4750CAEA3D0752EBE
-:1064F00003BDB3846983D37924B497E261968ADEBD
-:10650000979BCEA9C63BE91B7031F9DAD87021629E
-:1065100010FC351D7709222AC5D6424A2F95EBA6D5
-:106520000B724C45BB71CBD704D84BF130B09D12E8
-:1065300077D82992168DB8C8F89115DA5464A15409
-:10654000E3765608E58924F3960B4CEF6FA978A4FF
-:1065500095AABBD7ECFE9EBC3242ED52E2F79523E2
-:106560003DCC719E42C647B08FEC87F49739FF5DF2
-:10657000C85E940E49E4C0BC7E0FE11FDFD71EC584
-:10658000F9CBD9AF5AE4F6D5636C7ED3DEB9903738
-:10659000F0FC267E2E960B7018E1937A3C40E53D88
-:1065A0009BDA61A3391349B5846FC8BA3274D7E353
-:1065B00079B753808AF662BE69D2CFCDE9F3FDFC8C
-:1065C0004F3CD8EF3651A0F08C8AF46C41BD3F6A45
-:1065D0009300E88F548A3ABD9FBBB2FA804CEEB765
-:1065E0003442D8A7E33A6CDE96031E7A5E2A5990AD
-:1065F000F090FE8742399B915EEE3844DCA49FFB0D
-:106600005E2272D82E84844E9ECBB53103E19582F2
-:1066100051746FE060E82EB59BFA2D60E39BA64DA8
-:106620001B55ECD7AC6FEC0AA1DF522851BF45D106
-:10663000AA23945D3F25F830FD0A2217A138740A79
-:106640002554CF277CB483CAE8A67139DA350B3AD2
-:1066500089DCB6647CBD13E133A601954BB403D04D
-:10666000340089D813647CFC4E2DBC15F922CB7004
-:1066700059F97437C4B659F943D2DA297FB4FC45C5
-:106680005C9E4C2FDE2B307C5673BD77414ECC4741
-:10669000BC6EA92772E0EADFFF7A8EFFEF1A8B6EDD
-:1066A0001E4FF5133B7FCCE75D2EDD16AF1C7951F5
-:1066B000A1FB71DA2FF3B8FDD2944FEC178A07587B
-:1066C00080F64A1A277D5318E8737706240C428F08
-:1066D000341E178062667FA8E41FEAB9DCE576BB4A
-:1066E000C5EDB04F52D92DDF7445DBA95E232A09D1
-:1066F000E1DFE56A9D3F0EF19DC7FC46E7BEBBB8F2
-:10670000DF3857DC166A22703D992584DD7A1F3FF9
-:106710001470B978128C1397C83C7BF2059D58C051
-:10672000B0A746A0F6C9799DD9E7F08187F6BF8268
-:10673000C3D2B86911F58B7AF532979B6D75AA4D66
-:10674000BF38AF3EA53596EC5CF273FAA4CD8AD083
-:1067500038872F9CA0E70EEE33993DFE6071993A81
-:10676000909E938A94D5147FF965A725BCCE74FAC0
-:1067700045C9E7755EC16A4F8AA9FB0DF5BA85E088
-:10678000E9A46C9D3FAAE239E121E728CA85274C9C
-:106790008EA4005EB51C84DF130EFBE8B5BBB49C71
-:1067A000DD8F6EC5AB3AABE7F06CEAA74994EE7BA0
-:1067B0005462075AF031490C517CF6E2B750B0ED03
-:1067C0005F95AACB914FD57C01904FD5D8D7BB2EE2
-:1067D000E17C84FE6343C9F848E2FEA99D6FF69010
-:1067E000F30606A0C3E7E58B5F08A69F6CA717FD1D
-:1067F000B1C63D389D7BE9DF2F7EF1B7416F75163D
-:10680000A137E299D09BF9D7DA569433292E50FF5D
-:10681000C7EC77411863A39F74916852E237EF2A5F
-:1068200085A4FAF082A0D0FE443F94882CEEEAC200
-:1068300078E65C71533930B906F4B754E22F50BA98
-:1068400093F550CE9B3FAD5311EF6A4CA1F679976B
-:10685000ABAEB45E1A8E9E6470C16E66978C32CFFA
-:10686000D90D433B672F9043829DB3D5F43C92BA38
-:10687000ABD55202EF15F7B2F3116DB04CD21E4DED
-:10688000CEB7CE501FFF85F83A7271EBE17149CE59
-:10689000A3EFC53F39E046FD950FEC5CAB6D8FA0D3
-:1068A0005EF1E777E2B6F1BC5921127CE5151AA535
-:1068B000B8A591BBE6D17D7C57022A47177061824B
-:1068C0008F9D9B9FA8376611B98B443B0511FD62D4
-:1068D000A07A91D8B9DCAEB3AFFBFD4D4204F1EB29
-:1068E000C910F6A008FAEFED34DC16BD4CD6BD0792
-:1068F000D735CFBFBCC276C0F59D76414A7BE02F2D
-:1069000022F7B3A6D7A3DF950F0CCE873727EAD19E
-:106910004E2C7547EEA7F477F807BDF1251EC75E2C
-:1069200033D314227DD96FC93AF774C9B0159B9F30
-:1069300092DE96F8CE3D780E117DB3869F63774246
-:1069400034800FCF8240E36667E148E01A0B9D1F59
-:106950001215B64E8B7CB2DB12B75DDBCADAA6FE2F
-:10696000B97B97BD7D172CCA9108DEEE7A4C460F95
-:106970000DEE71F8A375A246F9FB6EA86E423C3489
-:10698000CA4C0ED668208D202ED2861F3F311DEDB9
-:10699000FF9D22F36F3E22FCA55BF4CD3A5F42419E
-:1069A0007CBDDF71CDD2EB01C7279A46A2BF9D0106
-:1069B00049CFCD3B5AECF00D06BF135E80CD14DEFF
-:1069C0005470486DAE48327B7A9F69B7727AD5AA07
-:1069D0008149180CB9E06157A30CA87D61BCE74957
-:1069E0003490750E70FB9158429359FEA27A065E60
-:1069F000071B7748D4B93E1FDEB83752ACB741ED1C
-:106A00005690FFAB24A3DC25F4C5A154B93A328AD1
-:106A10006C497EA9B493D8EAD67E2D43EC572E0C50
-:106A2000D0CF09EF694D3584C9FDE1BE1962C75069
-:106A30002E2E08B14AEAFF73B8DD886711AF12A5A0
-:106A4000278D8B84705D5F0BFAD11E5F07B5473CC5
-:106A5000BA64A37795A9078A80C673D28AECCF9DC2
-:106A6000F1923F8866FCBE93CA170D75922D0554AE
-:106A70005FA788F6E14CE94C6F7FB25E25EE6B3282
-:106A8000ED44F54B0DD72F95A03F34AB84CA178D3D
-:106A9000C3D5CC1F63201C35D97A18FD7009C211EB
-:106AA0003A8783AFAA2EBA2061F1ABABA41E05E5ED
-:106AB000A88AE86FEBFD8D4116274EA5B765507586
-:106AC0005F11DAB102C593A891B665DF9FB4BACA67
-:106AD000B91F94BE64007F776390C581D76C199B02
-:106AE000CEE229767D758E9F0F3FDFFF0305FD9770
-:106AF000B3CF9CB809F7B9FEFF8AA09275CFEDF726
-:106B000043273D37120A9E1BEB3AC4A471768006D8
-:106B10009617FF573FA5D7BAE7DD890564FCBA177A
-:106B2000DF9F0404BE739B7B0E8D42FBF919178B0C
-:106B3000771BDD931693FBEB2458154D325FA1C4F0
-:106B4000ECD4333F495B8EF2EB6A3B703B9DB77DE3
-:106B500099ECB69CDFA32499AE4BFA45F0B9F1B499
-:106B60002B3136895F62E619CE3CED62F0BD2453CD
-:106B70003F6F5DDB1E2546E0A86AFB98EA8BD9FFD4
-:106B8000FA6C00F150F59268B3E3AADAC44EF72428
-:106B90007A3D81578C9FBAA6239F707EE9D840E347
-:106BA000A695ED0F7E2C0670BC5D6F11BC843B1169
-:106BB000AFEF88E105D8FED1BF047482AA8F0E3FE3
-:106BC0001540BC9279572BE9189FB7F337CE7F3128
-:106BD000B3FF7C003D348F5BD5BE85ADE7D08B1F06
-:106BE000E12F79FDE3ABFF24D9F3E3D036B4FCED1C
-:106BF000FA67CF3F6990F5CE3CFF87270D02F7BDBE
-:106C0000FFFDC727BF8572F9338F867ABDEA99B732
-:106C10000260E1C3B512D3AFE70A88CB44FA9DFB0B
-:106C2000B53B8106C1B9577E3F5A27FB3DF7DC9F34
-:106C30007374D2BFE695B9B9B8FF9A1766E70E64C8
-:106C4000DF229F26DC56B812747EFD251733165EB0
-:106C5000E657075D0E761C1C8D709E3DE60E635A4E
-:106C6000AE8ADCAB9D8A74DA40CF596C6F22F8ADE6
-:106C7000DCDFFC31EA87FE7836460934A845D4606B
-:106C800010E9FCFE3C4A2FE8A1E7A3B37FD55142AF
-:106C9000C7C9A9E9761E3E5550CF55EDDFC2D67360
-:106CA000D0ED2CFE726D7FBA6D76D0ED3CDCFBFD35
-:106CB0003CCC97778CB0E5077AEDD4DEB878343DDC
-:106CC0003A807E30E57F30BCD2FC09812B2A451EFC
-:106CD00091508E9E4FEBA5EB02A4EBB3E74703E187
-:106CE0008B5372CFED781EF4BCE2D6303EB0EE95F9
-:106CF00077A85C9D7BE14D45A7E718F85CC4AE3CE6
-:106D000007BD3F87D1CEAC643E3E54EDF377BA0366
-:106D10007DF4A94C2C2CD703F4FE097A3FC1F8BDB1
-:106D2000327160892B09BD7E298D61FA3F914DF149
-:106D3000B261DF6F15F0D9E9E89A89743C310FEF41
-:106D4000A7A2A3B97F0DF73FC342CF7D4C4E9DFD57
-:106D50002B893CE279D74BD784EB1D482297E7F685
-:106D6000B8253CEFCEA15D95341FCAEC99E1E64D04
-:106D70000E39E5DACC9B703CA4E60F26DF83ED6F7D
-:106D8000B8F8EB90741B1F99783CF369727D7F9281
-:106D9000EB8B4A30CA475ED9DF0E91206A8C0AF528
-:106DA000C17B061D52C27F679E1169FCA7A9FD2009
-:106DB000D5DB4E3D518971CB24EBFDD15CEFA503B2
-:106DC00093509F9D79F527943F2BF79F50D0BE3F5E
-:106DD000D4F623A5BBB84F1EF03C4858CE83333FB2
-:106DE0003C3089E981E471515A6047E0AC7AD93E80
-:106DF0007FD5FE8F6DF3AF37DAA97D30D83A1F49C2
-:106E00009165B8DF8F0ECBD49FFCA85D4C1A27FE8E
-:106E10000F3C0F2D766DD39BF37E8BF9AD92235EE5
-:106E20001DCFCD8ECD91DCED68AF1D9181E60FA415
-:106E3000C81FDCA4DDF1A657C7BC73C791A5A26E1D
-:106E4000F1437FECC0E78CA3C66C3F996F4637F1E6
-:106E50007FF5FE7A63E671E25759F8A0E6CDF25C61
-:106E6000D4F7E887EAE371BD7010FD5C3130AF9C68
-:106E7000E5A505CD93F4BC66F3C9BE288D4FC99A2C
-:106E800000BA65DE5190A8C73C3AF87CCEBC4354AA
-:106E9000B5E697961F3E802E66D6E297F3709E0069
-:106EA000C4B50FA9FD09E14B03D85FCE3C8389CF60
-:106EB0005EF94B917748D36E0F1E80FEF3F5CFAF8E
-:106EC000C454CCAF34F9D6B4842CF995A660BFFC79
-:106ED0004A4426786871258F478C91CBE6E073E2AF
-:106EE0001DC7923D5F2E333EBF11BAEF5F8D7046D6
-:106EF000599E6696035F5FE2F8FAD964B271A242C6
-:106F00004B41976482DFD94B227199DC9FBBB2E77A
-:106F1000EA5769779EA731C60B97D2868EBFE1E606
-:106F2000E34ADD8B56CBD983E7E352E585FBE030BE
-:106F3000B83F9E69CB4F1C7CF7011AAF97A1BA25C9
-:106F4000648913E5747A208271FE2C9DDA87399D5D
-:106F5000F77C672DC699B3F2C31EE83F8F74F17AB0
-:106F60001ACF30F3F4527E84C6E5254D2F15E93A49
-:106F7000CB2298CF6FD681DA1FCDC181E33553E4A0
-:106F80009881F4942EDE40E715545E5730C47D7E20
-:106F90007B7180E23940F08CF24EFD1FDCDF71170F
-:106FA000CF87771B22E6C34F64D0FC404082228CFF
-:106FB000075C7079C39B43D02F1F9E8A7FB74B8697
-:106FC0004AE3247ABF7CF82ED9124F53311F4E8BDF
-:106FD000F9ECF970D557137C5D47FFC662EF86FA6E
-:106FE000FAF5C99D231F8E73615CC6689E8D764538
-:106FF0007306F0FC38CB8737F37CF8B38DD366A3E8
-:107000009E6DF698CF67B0FE66DBF8F5AB111FAD4D
-:1070100003A1EDD372CF66EC9F350AAA69FD9914DE
-:10702000855B2C7AF0B82CB13A5539F2BC6CAD279F
-:10703000E2FC60E67B0EBEFB7BCA57781D8374279B
-:107040007C8571A99CCED360D5ABE6D5E49F667DE7
-:10705000E0F8AE7C710ACD9398ED40562C1249C2EF
-:107060004757BAD9B963F271200809D4AF8199B1F1
-:10707000EFAC45BE0EFAC26914CE07689DC90E0D6D
-:10708000749AA770EC6387BE91F2EDF92CC2E516F5
-:1070900079E90FFF0D1C7EE61F9FD7781C306840F2
-:1070A0002C097CF2C512BA8F2972E4B7563C665D92
-:1070B00091BCCEF60E85EDA731BA92E5D12BEC79D5
-:1070C0004F4C335BE3A6D35CB153A837CCFCB9A0DB
-:1070D00046797EC330E3EAC1DE78B68EF580F71AD2
-:1070E000A8DFE495ED860BAF592C1F22AAB18FAD16
-:1070F0007C2C69DD4C0E1DF9BDB9E2198A971D8300
-:10710000D06F5B1DCBA76EADD3A8BDBDA52E48DB50
-:10711000CD753ABD36D545E8FDFEFCF4F3E01DC85B
-:10712000473E2FCD270DC6270FD585E97CF1BA99AB
-:107130006C5E97C9EFEE06E4774530E5C74FDB3E5E
-:10714000D1948F2CDADEEE62CFAF514653F931F98C
-:1071500079B0FD8989E994AEC39D3FE57E67F986E4
-:10716000B4DFF44EB6EE50D7713BD6D9314BA57A89
-:107170007947FE20EBB4B27506879FE16BDB81D3C4
-:10718000B45EC04DE4DF43F6E1D62249E5C1949FE9
-:10719000FEF3B8A9DE6ECE62F94FB9D0174165DEB5
-:1071A000ACF37C21916BB47FE4A29C32BC2F87AFFF
-:1071B000A2F5DC72B18FE6E3E4C29C3BB0BDEDC04A
-:1071C00016AD8CEA01819E5FB5D00D58974BC486F1
-:1071D000C663E5C2A2B5D85F43B9247064BA99FF0B
-:1071E00024175E77378E3F30E590DE9085E716E313
-:1071F0003FE8966CFCEF94FB94FA2B68AF5F04E9D0
-:107200004E40BF74DB94BB8AA87CAA967AC62475CC
-:107210007DA63E217A638D62A9E354608E8179D385
-:107220009DB7DE154EE62F91F3749D92DD7F1E73A0
-:107230007C851CDDA0B0BA74B0D7A527CF4737072F
-:10724000CD7C74B58AE7A814ECADA75B9047F0C27B
-:1072500052A9D05B4FE733EBE9C22CDFD54AFE25BC
-:10726000CB4B3BEBC42F573DDD16A5B79EAE00EBD5
-:10727000E97E2A43B813F3EA6F89E1BD7A7FBE73D2
-:10728000CEE77C2FC23C0752C965A762CF87E6C50F
-:10729000ECF950B8D3635BEF359497E2C1F5CBA816
-:1072A0000AFB3C05D5F6FAD72B6A336DED9031D247
-:1072B000D6FFCA9631B6E7635BAFB23D1FBF6BAA7C
-:1072C000AD3D21719DADFFD56D65B6F6C4F6AFD865
-:1072D000FA4F7E6991AD3DA57385ADFF355D6B6C51
-:1072E000CFA71D5E677B3EE3D8465BFBDAEE6FDA25
-:1072F000FAD712F34641B9CDE2F5C259B98235CF7A
-:10730000DA924DCE25E2B7EFC8260C43E3D9ACFEA6
-:107310004A618F7BF380CE7192AE44349AB71F37A7
-:1073200007AF20D5D0F354D273CA747A7FFA3CBC2D
-:107330004289BD0E56D1591D31FA65F67CBFBD1E7E
-:107340005811B7D1B206F7F12F77B926F5A7AB924E
-:107350006F9783A1D613CBBA63DC30E5E28C291793
-:1073600005442E683CED5311FD1E98E3A7F685C534
-:107370003FA27834FDA31B5488A3C968CA45E9CA53
-:107380009E51B48EAFD72F720BC3A95F33E52F6028
-:10739000D1FB91AC3E3DD33C7368FA554C5C63B372
-:1073A0000F9DD786C0BA54FA31E01E403F4E91A3DC
-:1073B000196EF42FA5880196F80B54CB36B8870ABE
-:1073C000E7673D07561386B3EA15134E85E86DCC83
-:1073D0002B352DBE893AF55003363ECD591EA5FEFC
-:1073E00009B10BAF76DBC633FBF06FCD4EFE8D6C73
-:1073F000DFA7692F9B780F84C2B49E04F204407FFC
-:10740000AE69562C88F1B416EC62F10F1F705F491B
-:10741000E7690C2A02D6B93776B1387B835ACDE2B8
-:107420000E72358DBF34640B5AB23AAE3BDD2CBFC1
-:107430002BD63E3876DF007C252AC9E30E0D7C7CF6
-:10744000C3816F74B17352D1D19F06E234BE6FC94C
-:10745000BF8970381A72E13A3BE83A010E57A040F2
-:1074600080FAD0E070DECCFD1DA976CB80704A0892
-:107470006712BA9870C611CE92D470FAB3CB687EF8
-:1074800052AADD46D731F1BACACDE8E584DBC4B7EC
-:107490000C91F2D9D83EF1E5284D8712B223BFEF07
-:1074A00098C9FC66A2D86DFC6AFA2D845FEB915FE7
-:1074B000258DF92FE6FB055F716B0CAF9C8EA067E5
-:1074C000D2B8432016A775E7FE18F3B7FBF40DE317
-:1074D0001BBF1C01EC2FF9049ABF5378BCC2ECF718
-:1074E0009E9BC5891A667547711FCDD74AB019F59D
-:1074F0000FD63763FC2E9FED378EFB22F0FCCC9D20
-:10750000C1F891AFEB8525E9B41052DC1F1C480F80
-:107510007B117F23FAEBE327DDFCBDE03CC863FA77
-:10752000B87819E6A353CDE3B44BCCFAE7E1D7B56D
-:1075300057D33846B36F6317C681CC381C044B92BF
-:10754000C6CDFBF0CAF2897DF45DA67712FA49D365
-:10755000A6523E69CEE7F4AD76D4E99A75DD9CAECD
-:10756000669C1B822CBE63D2D9D38BCFDD03E2D3C2
-:10757000C3E5C689CFAEFFA1F8FC11DA28E4EAF72B
-:10758000B3F7C2E1E03780E68DF2EDF2688E33F9B1
-:10759000DDB9FF536E7EBEFF0FDDBFC90FA9FB1B18
-:1075A00049FD1433FFE9E7FCA6E2DB4D44F1BC3EA4
-:1075B000F364CB955978FE32BFDA3F334EDFAB959B
-:1075C000C1D0502FF8CDFAD912FB7BA0DE62BB9D53
-:1075D000A53AFC1185D72DF57BCF95DB63CEF797C8
-:1075E0007AF1EBA0D7683545FE6A88EFFDECE4F947
-:1075F000B4BC9AD67AF46FF3EE6475F6BB65588521
-:107600007577232B0CC19B85F995D0736964FF793D
-:107610002F3F5C3F0A4972A71E42B3E17BAA6E8BE3
-:10762000EFE7DDDB5AEA65CFA7E03CBB54A677F372
-:10763000CA5B693D59C30BE3D3D16F79EDDD651AA0
-:107640009EF79F6415D2B8EED917DD11CCEF9DCD12
-:10765000840A5AB7F5E28C436897FFA1AE2B53B268
-:10766000F0C9D91FBE395D26443AFBFC9BD3254A9D
-:10767000AC84EDDCDF70E957D3116EA30C8AAA311C
-:10768000BFA629F47D932A95E5B3CC7A9C9D394A0F
-:10769000135E7FE261FA382757D881ED5A0C70A14A
-:1076A0009DC0E3EDD79FD197613D644697ECC27AC8
-:1076B000B9875D86E123D70B271EA6EF5D2B9DD5ED
-:1076C000183621F7C30711E5C658E6675C08415133
-:1076D00088E87DEFE1EAF1D43E76D42399FC2FCD02
-:1076E000061A97E8B9554DEC0D617C58FFF64AB281
-:1076F0005EC34A89D6CB6C970EAB5A123DF68667AD
-:107700008C0DEF7E1E2F3EF8EEDDADA564FCC62984
-:10771000AC8EDA77624A3A2491DFED7533E9FA816B
-:10772000BC93E5A508D6A7E4EEF43EBFC727819138
-:107730004E8E4839241832C18B6F26C0490BDF3575
-:107740000910D1C8F317EB80CED351A7D26B5B9D44
-:1077500036B69018FADFAD0BD2EB63753ABD3E52E8
-:1077600057449F3F5417B6C93DAE77B288B743A977
-:10777000E5F6725FF17DD8931638764E24524FE8C5
-:10778000B593E78B1E2C9E9ABE66807CC3EEBAAE84
-:107790001173C6726411FAE5D7687BB60E00FFEE6E
-:1077A0007AD7AA459837B94F8AEEA5FA3196B7C865
-:1077B000A21F1BE5581E1056BC5FC99C33278FCAF9
-:1077C00023959792C331C03A9BBC60AB0BE3D6794B
-:1077D00047D97DF3FD074A2F22683FCE9AE39251A5
-:1077E0006F16433B82A514C7A08CF49F91BDA414CF
-:1077F000EFC344FBFDE90A936F9CB78C5CA7AAD149
-:107800003615EDA6CC5DC6B3643F7FEA70EB988772
-:1078100079E8D53F2B187F8FFF5A51D18EC97BF95C
-:1078200004AD4B88BBBA156292C11B2D6BE748446F
-:10783000CFC4793E802A16C22771D4B1349EF9FB99
-:10784000F89C627CFF2476DADA7FA737761FB65180
-:10785000F1AA41C2471EB3FF9A78249FB4797DEB09
-:107860001B2DABE3066D93FE53583B4EC6BF9811DC
-:107870001B25107CF9EA57C5BBBE846DB3FFAA383F
-:10788000D6C31E52593D26F8622194B7DEB646DAB9
-:107890007E4B5B626D50D9D5DCEF86837F3E847A68
-:1078A000AEF265573B8246F41EC3FF4B0FD3EF2465
-:1078B000B4D575697199D3DFA40311C90941A07EBC
-:1078C0008A927025C610FD31817F1722AF24A2D77E
-:1078D000A37E4DC861D49B577899DD382141E6B12C
-:1078E000C8D58414DF1FA17959A4E33656D7DB8F9E
-:1078F000BF3CCC9EAF05632BFA0DB05FD668BE903F
-:10790000C71DCF98E71CF73FEFF5B0A6BCD9F05ED6
-:1079100085FA67B544E35AEB43ADA50A5967FD4FB5
-:10792000426172B242A387D51DACCF68CF994AF8A5
-:10793000A431C3DE7E98D7B906338C8CCC62AC0BF5
-:10794000787834E6ED2BA1F5F66F22BCBF64F9C15F
-:10795000D307AE4DBF9EB437FC92C5753774BCA932
-:10796000C4483FC1C3EB093AA67C05F757B94D009F
-:1079700021C4E433329EE039D27A9544F864A27788
-:10798000C45C4F01C0D363229A40F860FED68246A1
-:1079900015DB8A3601E566FED6C246E4ABF513CDAB
-:1079A000EF2414BE1E29E4F54C23719D07E21877DD
-:1079B000DEB7A2FC2B78CCE6084C6E0923D2FC9EE5
-:1079C0009811A779A7FF6C14685C1B53EE9BA66205
-:1079D0003D1D7449E4BA5361F4339AD8FB0CE47E3C
-:1079E0008B3C15E9C2DE1B228E24D5FB635F76D368
-:1079F00038726175E41E6A1768C592F5BD2CE0798E
-:107A0000E32BF03732CF780D4AF1BD80A73D2CFE35
-:107A100057B87CE97A1C27FA977851CE73C4844111
-:107A2000E7FF1E8B3BEF1412EDF81EA31128A4F400
-:107A3000DD19607C613C524CF9629F5076D57D84A3
-:107A40000E8DAED55BFF0DE99A51084857BCBF912A
-:107A5000DCDFC7E929668435A4DF3E4ECF784230AB
-:107A6000B07EC5BCFFA26BCD3D286FB76ED93F4736
-:107A70002578CD71475A47103A2CDFB23F1EBC968D
-:107A8000D2618C4AF0BEDCB33F8E74D8571F19A95F
-:107A900059DAE3FF42AC115A07BE9FCAB394F1C84A
-:107AA0003A9477F2FC3595F0E9D399A6BE60CF0BF6
-:107AB000C7F4EA8F0890B346ACEFD3272A391F0AE0
-:107AC0002DFDE710F9FEE727599DF997C87A28EFB1
-:107AD000641F343FDB33414AA0BFEB25B0A0DDE299
-:107AE0009D3886D6CF917D03DA253D13257ACE9A2F
-:107AF0007169F70481BEE78DFD911FBC05AC3F1194
-:107B00009428EA4D295F02D4EB92B83B3241C7700A
-:107B100030CBBBBAB485F43D514F9125CF0A7D756A
-:107B2000BAB41DA29F97B1B5C7BABBF3046257663A
-:107B30001D5FE81A4DE65BEAE1FE4616B1B7C9FDE6
-:107B4000151E662F3D1035BE8C210DD0BBF3A87ECF
-:107B500082E854BCE6DE56989B2C1FD277AE3BEDF4
-:107B6000EA6E6A3FECF009E5C9EA4F0BBD3CDEE086
-:107B70003B42BFE7510B44FE512ECCF764B9FE30B7
-:107B8000DF1F70D6FB9AFA44CE607BAC995F968B70
-:107B90007A40E2F5439216D6B0FEB1D45F42EDBE14
-:107BA000C7B99E120F5C7B33BE47A1A03E00D45FD5
-:107BB0003103F3FF3D79D08EFC2A052360CDD39AA3
-:107BC000FAA0A94EA5D7A7A68E2B4339796A6A4E8B
-:107BD000994664E0E0A49F7661DEE8FC6E26BFE78C
-:107BE0000FAF35687CC960F122642B1A67EC7C9476
-:107BF000BE27FB0329FA10AD7BC5FA0502D2B60CED
-:107C00007B7DD5082FABA3ADE2F036CAEC79731DAE
-:107C10008B072B17AFA671A9F3FCB93B76277DAF75
-:107C2000C24DCE327CCF5105C360DF196078C0F7FA
-:107C3000986C798B8B93E8F82A0FC3BF59CFE1ACCE
-:107C4000DB30E119CBE1E9FFDE849D1EA6FF65D2A2
-:107C5000C11C5FE38AE46A03F04DD545111296F822
-:107C6000475FFDB542EF9FC3BAF574ACB389B55E0B
-:107C70001F42394850FFC8E3AB01E0DF35A27C1A50
-:107C8000947AAC75E2698EBAF57EF2A2DBDBCEBAED
-:107C90008515C81CD3981EA7F5A6127CC745E87D9C
-:107CA00036EDBDE968D75611F5A062804832345CE4
-:107CB000FF1CB7F7A597EF8B8CD2FBF663C60BCCF6
-:107CC00076E54B0B691CA16A9F8FD6E357A2FE9BFA
-:107CD0008C75FD4697DB56CF1FE9C4FA39F9253676
-:107CE000DFE31C9E3F691579B8EF37B8FF9323C4D3
-:107CF00044F652CA618A87B827720C34A6CF24C2D0
-:107D00001371B3DEC2581B478761A702367B69A790
-:107D100097B5FF73CBDA789C9DB3DC9EF984DA3F8C
-:107D20008D1EB37D96EABB9D4A6B27EA3BE345B7C0
-:107D30008EE717194FDF93365614D173201E8291A8
-:107D40008887D73214AAE7E22FB8F7A29E9BAAC66B
-:107D50000EA916BFE16CC6DBA3D1FF4A329F619B1F
-:107D6000AF6078F391F53B10AFE6F3D73276768AC1
-:107D70006C9C4EBFAB917F78F46AD2CE79D14DDF47
-:107D8000EB31FD4D275F2A5E265F4D8EF7F314948D
-:107D9000371FEADB6A2A67EEA03DAF65CA9D7271A4
-:107DA000822DBEFF383F67152986A14AF2BC983E56
-:107DB000AFE2746DE27506A9D7C94CB1CE35549EB9
-:107DC00053AF339DCB3B703996B4DEEFB10CF01E50
-:107DD0009F33EFE1D453BDF2CAF5D0169C1FE3BA2E
-:107DE000101BE325D77589F6795E3A3A3609EDE03E
-:107DF0005F737FBCA8EDE157F1786E7147EEF24CEE
-:107E0000A3EF657D17AFC39587F95EE0F1947E7AA5
-:107E100088D95777327BB566FE546ADFD56C1FA3CD
-:107E20001903F8491517D36C7A48F0E8FC3B77063C
-:107E3000D547151703F4F9E55BCF637BBFA4FF7A41
-:107E40003EFADC5CEF5E879E3D38E9173B0BC9BA12
-:107E500035CFC982DBB24ECD73BC3EDF43F4AE5D9D
-:107E6000DE2328EF52087ABF4782FA619BC2DBC645
-:107E70008CC639F968D75AF4C34CB4BFFAC6E3F7D5
-:107E8000E5B679CDF19146B487FAF54F73F41F63E7
-:107E9000CE5F4EFB3BE131F50FB6D1DE92FEE2360E
-:107EA000E1A3FAEB61C1315FA6B9FE423A9F69775F
-:107EB0009F6BB9F57543423E6D2D45FFA9672DE8CF
-:107EC000F8DD871F48616FD8C2B7E75466F7575C83
-:107ED000BCD246EF3EBC8FB3DDFF7D5DD0564F7BFD
-:107EE00077AC86D6519F5339BD88654EC7ED1E6568
-:107EF000ABA3FD071C9F158EEB53C071C35F198E9A
-:107F0000904D3EFBE028B4DDFFAC704454A68FE7F3
-:107F1000F1EB5C8DBDD73A5777851BC8ADB9E4BE90
-:107F200087F0FA97C95525D7B912183EFA3DD20401
-:107F3000EB4FDAE8DFDFFC97FB3FB89126AA82B669
-:107F40003A0191D7613BF50EBE77CDEAD854DBF705
-:107F500042CCAB5764F594CEFBDD3C6EF0EDAB2B21
-:107F600001ED6962AB277DAFACD1C7FA811A146C01
-:107F7000716EDE36EB702F175C7FE4E7F4B7AFBEAF
-:107F80000930AE2B215C49FAB573B89AD408CDC339
-:107F9000C5B581BF07F359E191D34C3CDD40F124D5
-:107FA000A6C0D32A1FB72FB418F5939A825F0C3C52
-:107FB000B9BDF00C8C9F6FA43178E0E215948F442A
-:107FC0004EA7265FF2EFDB98F98F26F58B857F723F
-:107FD000DAD0E8BB87F7FBA2E95B3A44FA8E30F9C6
-:107FE0004DFB62E1593C4478AE35F92D18A1F4FA05
-:107FF000A2E0593B44787E6ED24BFF62F1F3C01091
-:10800000E139CBFB29692C3EDB54C4DEF7F08AD181
-:1080100087B0DE6130B9F016DAFD6C35DF6BAFB3D7
-:10802000FAC05EC7956A9FBFE1FB4C254F2BE44425
-:1080300036D2EF581D8B07BCCDFD93DF5434F86961
-:108040007CDEB14E5370AF7FA0B8CDFFAAB0BF3772
-:108050003B981C17A4B1FCCFAD31FBB865CBD31C4A
-:10806000756106FB4E30C75FAAF9FE5EF0361993C4
-:108070009843C01BC1577A6800BFE172E32B95DCBF
-:108080000D175F716D78F81A4CDED722BEA60D1D54
-:108090005FA6BCFEBDE24B1926BEFEDEF9ABF41FA7
-:1080A000F81A16BE160F571EB95DFBF78AAFA1CAA4
-:1080B000A3D36F23FE5D78A0F7FF2F37FE9CEB7FE5
-:1080C0005E3C9AF3AD48E1E7A5C2E7607098D76ED1
-:1080D000EF10F1EAF43FFFDA7875ACFFB9F1CAE7C7
-:1080E0001B365E0781C3BCFE11F13A0CBBAE4D617D
-:1080F000DFF574CE93ED67DF5B1BEFAA3E321FF313
-:10810000C75F15697EFAC8EE391BACF540D97E66AB
-:10811000FF1F299FBD81D65747D368EDD95121FC58
-:10812000EF2598575EC4C639E73FC2F1F55FBE0C34
-:108130001ECFD6B391AE47A38B07944728B7EC8BDD
-:10814000E68D2CF415FBE3FB08E8DB4B300FB12088
-:10815000391C269D53AD3B5CFA1E8DFE6058FA67B4
-:10816000B0FDFE876FA8767A82E2310B7AFFDECD12
-:108170005588CF3681D5C31DC75B79F8DD35A09D05
-:10818000962DCFDD83748AF9595EB043D13760FEF6
-:10819000C4BD78C1837E42B7A3B764B8DC167C5DEA
-:1081A000E3677ED5F495C9FDAE08E783BEF12E18CE
-:1081B0009F84BF27F37EB7AC64DF07032952B0C8A2
-:1081C000F21EE90ABE8EF9DC397EBE3F40C71F4D64
-:1081D000F15EFEF57CFE654B061E0FD5ECFB3B8485
-:1081E000EF0AACEFB1F6F219978FE3BED81C3F81CE
-:1081F000E76D57EC89AF211F4DF0B1F7802408617E
-:10820000FD95394F96049D0AC1FB07B25E8079CD7A
-:1082100024F37C75A07952E1D5DC8FB90E8A227ED9
-:108220004767AECAE28825118059183F7487EF630B
-:10823000F943C60799BC0E7146755AA21EFD5E89A8
-:10824000ECD3026FC7FF9BFD4FF8BCE388A0D1F7CA
-:10825000CF1D78184C3F6CE47C9325C6367B306F7D
-:10826000B2CA95F43B73EBFDECEF0C15F87BEBA574
-:10827000E83AE31E8BC9F87D8AA512CB7F114E2CFC
-:10828000B0FEDD9102CE07CE715922AB37827798CE
-:108290003CB7ED5D57904C7E7EC5E5B4C05F64ABE6
-:1082A000735C12BD4F46F95CB260A1ACFBF0B9CE75
-:1082B000F88DC3D1A6C40AA6F8FAF094520F71FC47
-:1082C000741C8B35E0773956D5BA689D40F126C6C7
-:1082D00077AB361D103690EB1E2E7F0B910696F96C
-:1082E0009EE0746DDBEB1D8DF0B799F91B9C98C077
-:1082F00071FB2EA0F990C7FD1F34613EA4DB053C45
-:10830000FF1B2DC7FC6F37AF6F7B8E3CAF4778E705
-:108310006453F91EB7E9E31AD4CF1D0AD0BF7BF12D
-:10832000BB2DEE04BE4F60F24BAF9ED874A10EEB96
-:10833000871F553A2722DF6437547F2D59FE743F3B
-:10834000A7C39F7CD1F46476A07935F5B9D96F9134
-:10835000A4CBC9FA2F2E779C6B1CEE11EECEB390F6
-:10836000248FD9CB878981EDB4B7B81EFF9523CF71
-:10837000BBE458F23863975FE0F396ADA7E796E168
-:10838000D669CD3487C7C45796C1F0B4748968D311
-:10839000B7AB16A439EC1E86D79BDDFA93B88F478E
-:1083A000F7FE62227D2FCA713E78C59882CFEF8694
-:1083B0004E19F5C42951A7D7B7EBECDFFD7E1B6240
-:1083C000DBA7E1F9592B2695ABF739FFBCBDFC8E35
-:1083D0005B28FC715143F84FAC1C71D34CD42FCBAC
-:1083E000E5F05832EE44FC7EFF5ACBFE7BED1A07D7
-:1083F0005CBFA9B863C0736BD9723BDDDA14661732
-:10840000185F6172780FE1D15994BFBAB7CF20EBF2
-:108410001F49644ED9CABA03FE7DA7C5FCF7534273
-:108420006CC70CA26F4E0B2C4F627C9DE98D258F83
-:10843000451B31757ABAF69A57BA49BF8B7C7FEFE4
-:10844000D50E7C3E3AF969DC63767B6FFA31507069
-:108450007CAC26F979B0554BE37FC72B3C1AF5CBA2
-:108460006D9B92F7FB213233A1EFE9FF162B92C5EA
-:108470002727680CDE55D1E4E327687EF61CCFA5DC
-:108480002478FE2090C6F59C361AF5F4AA14F076EE
-:1084900007D8F9F57EE303B7A11E3825D8F5F39187
-:1084A0000093D7F600E3EFD37B57C8D948A72697A8
-:1084B00086FC7032233C01F96D75FC047DDFE55FBD
-:1084C000020CEE43DEA81E9886F2B2686E36A14B0F
-:1084D000C74A08BBF4D4FABF2860EA7F16AF25E785
-:1084E000DF0778FE91A11F50FB438A8CBE75229D49
-:1084F0009AD6819F168C75B4CE70AF97D595427879
-:108500009AD58E9FCEE13EBD6F78F4BE25EAB0834A
-:10851000FAD97FAD9574DD7D691AD6A51C29173B64
-:108520006F24407EB82F8D7EBFD62917A9D61FAEE7
-:108530001D787ADFF0ECC0C1F6BD32101A921D78BA
-:10854000BEFCD11D2528474AEBA464FAD7D4D347F3
-:1085500079FCDDC93FE6B582F3C5A9C4C070DDBDB5
-:10856000CB0ECF6DD576784C79399568F0AE463C18
-:1085700041E744AB5D0A73A60D72CEB2FC542A38B3
-:108580003705EC7A02390FE9700FD737EFD53E1A6D
-:10859000B0D2C1B9FFD302F70F9E6475B963A3AB24
-:1085A000CBB2F53EFEDCC2E7BFDC7C699E33CE7900
-:1085B000FED6F9D03CE706E3C3AC14799C027C718B
-:1085C000998C5F2D690AE6EB0B023A6B83360F5FDD
-:1085D000D58299E6DF57D147E3FB5FA7F77AE97BBE
-:1085E000C0C6567702BFDB7E6AEFF513ACFBE9E24B
-:1085F000F459B524837E9EE294109E9F4BEBCE44AB
-:10860000FA9DB5B78F65CEC3F6A38705D4D0705B4E
-:10861000CD6A11F7F77A80BDB7B36AD39BD41E1C1D
-:108620002E9FAFAAB69FFF13701FD9163B4BEA29A6
-:1086300041FE49858717100FE8074517CE45FD7C99
-:10864000C72617D5B72FF279EE9022546F439C9D21
-:108650008FA0127C9023E4046E02F1F138FFAE94F7
-:108660001455ACEFC9ADDDF6C05CAC7B75CACB97D9
-:10867000D3199EA6A433BD7DC81B7B2F90DDA79F79
-:108680004FBAAA0FE4922EEB039AF91D5F2AA7E6D0
-:108690007ED673B8889DF62CFDBE30DF1FF438F807
-:1086A0004D68ADFC29E2BF4CA57681D74DF43ED68E
-:1086B00045FFC04BEBA84CB932ED1DE7F8A552CCF5
-:1086C00066377ECAF59ED976DA21FF382F92F71FDA
-:1086D000931E1A929C5EAEF36252FAE5392F04CED5
-:1086E00067CE73A357AE9BD8FB20278E7D32379978
-:1086F0005CDFF819E170CAF3A9BD5EF65DE31BFC0F
-:1087000054EFF4F953B909F4979D7281FE147EC7B2
-:10871000E3D1BD6F4CC4BADE13DB1FB82D193DAFDA
-:10872000D6781D7677AE2D9EB72600B4FE1BC87A8C
-:108730004F59E637C7F5CACB20F1CBA52BAEA5FE26
-:10874000E4DB2BAE1FBDBAB8BF5FD1AFBF2BF6F8CD
-:108750002DB86E3DF7A777B82BF626F303395EFBED
-:10876000C789EDF6FD2D9B4A1BD1A5DE9C76C397EC
-:108770006249D6EFF56B36258FC7FD9F74875F631F
-:1087800010BF86E0A37BA5189859D2E7D7741B5F6A
-:108790008C5FF33BE8F9F71954FE93C3F7643AB3DF
-:1087A000534F29B11DD712F84E13FFC740F911C816
-:1087B00038E497EF26F7D71EE1E37EB76998FAEA27
-:1087C00098DD9F49257FBD707D4EF96B537A0A5025
-:1087D0000FFC6ECFA7EF3E80FBD9E3A5F876CE73F2
-:1087E000A32672FFC24BF9D63C9F3B14A6FF7FF72E
-:1087F000D591F4EF553BE503A0F5A6EBC8F3E37B79
-:108800008529F81DC4B6BD6915C9FC9C159A8BFB5A
-:1088100017F6780F70FBEE16CE6FDADE67AAADF1B1
-:10882000E877B8BE32E300AFA4B37376C982850A95
-:10883000C67BD6F6C69B803A2BDA55F97BF03B52C5
-:108840006FF1F7B98C35FEA4EFC7FD82F3E56071D7
-:1088500088E52BED7182250B063E6F3E4C24AFCB95
-:1088600032F939D57AC33D5FDA12C3CB8B0DB64FDF
-:108870008F36347FE416A8FE12C63B964258C6EBEC
-:1088800012A89EF85382CA0F772DA6F0BC65FEDDB4
-:10889000E14FEF9F68B563FE8BE3FBFC92FBBF8A61
-:1088A000EAF21DA57A62B2F3C919F7792B053ECF1A
-:1088B00070BBE71DA433F2EB5231299DDDDC8F7FC5
-:1088C000672593A3FF0F425212950080000000001D
-:1088D0001F8B080000000000000BDD7D0D7C54D5CF
-:1088E00095F87DF3E62BC924992433934FC2840075
-:1088F0002206984008A80813422428950904080A6B
-:108900003A7C88817CAAD8B25BB74C0860A46E1B05
-:10891000566A5DAB74A0C152C536D1D422A638A028
-:1089200028FEABFF06EBBAB845775017F9924456CC
-:1089300017BBEB963DE7DC7B336F5E6620B6757741
-:108940007F1B7FEDE3BE773FCFF739F7DC3B972EF8
-:10895000C1DF0CC62EE99E8BAA5516B232FABB04B3
-:10896000FFAB9E9B145576D9ED8C3919FBC7A5AD8D
-:1089700089FE22C64E19E065096381C7D4E06E0501
-:10898000CA41FE5EF6E7B22B54FF547041AADF36AF
-:10899000783CF9BCEB5118774C649C65CDD1E386EB
-:1089A00059602D73C038C144FBEE0286FF0C592676
-:1089B00046DA77DA0D340E3B9569602EC6EE936D7C
-:1089C000E38CF7BB0DD0C15583EB571BBD26BB66AF
-:1089D0009E2B52DD8C4D8E94ABE746CF3335C54E82
-:1089E000DF19B3E7FB92193BBD2BD14BF0989E1CCE
-:1089F0001C05F3ACB0B2800DE6F9F093D7BCCF46BE
-:108A0000305625E051EDFBD484F0386DE8DF9C8CC6
-:108A1000EB7ACB60DF0D43951EF39AB4F05B9BA21B
-:108A200050FFA73B2E0FBFB5297C9E0B2AA3E7B7AB
-:108A3000F058625459BFDE7FFE9B072662BFFFFCE1
-:108A400037174DDAFE177D91CB421991F21D358A09
-:108A500037583478DC8E54F390E0DEA183E31D5F59
-:108A6000E453FF0E953577C65897C76EA5FA0B7D70
-:108A7000652627C073E5FD8A47812E8AED6E1A6F41
-:108A8000A591793B613ECCE8CEAF02B83B5B9BEF52
-:108A9000F3C5E8678D9DC3EF339B2FD57E19F8BDD5
-:108AA00023E841D65B64F49B62D55F5C130DDF3035
-:108AB0006395B1E67FFF57A44739BEBEFE50E7512C
-:108AC00097C2F932C312FA84A9F0E21CF453FA15E2
-:108AD000C6D5D5D78FFBD702EEF1C63FFD47B536D9
-:108AE000161CF60AF8FB7D403F31BF27D3F7B75875
-:108AF0007BE37EE2EF24CF6E0443C7CAEF01DAD9ED
-:108B0000EA39F7BD0AAFD91F920B68FCA5BEA315C1
-:108B10000856F6E5C3E311EF9F573EFCBD1298DA05
-:108B200069B3BF35191A9CDEA87802EEC1E3BC8593
-:108B3000EBB430F6F6062BADF70FD096F0330BFE04
-:108B40002F9BB131AAB70E850AFBB6C5BD5BC3B773
-:108B50008EF51737B0F18CED31FB36E21446DFFFAE
-:108B6000E93A86328F0569DE1F983C6B08DE8C116E
-:108B7000DF1FDF65DBB915EAFD3199E3032839DF33
-:108B8000374E23278C762A0F153FBF8B839FAF2A42
-:108B9000A7E43AE38D0390A7F9CE9F696B5352196E
-:108BA000EB36BBEFC4F5F4CF49B0EF0214CE377B00
-:108BB0006F46F8BC75D4606829A06E8D48A70BF885
-:108BC00010ACE09682EF8E2D41F963F226C054AAD4
-:108BD000A00DBB16E868A62D80FD95FC6EEED3882F
-:108BE0009F876B2C6E15FB9BEE7E4F85F2FC9B2CBA
-:108BF000EE8DD05F69EF88830EE87FE15CC5CEA083
-:108C0000FDAC39A39C61585FD27AE82707A7F79D8E
-:108C1000CAF2918C3D85835DC7F8840116F3155126
-:108C20000E3CD5360BE4C15867B7C106A05EB8ED5F
-:108C3000A9362BF4BBB9C597654F83C9A6B5B459FE
-:108C400087813E72797B6778189B9AD65A69BD01F5
-:108C5000D6F998EC6F539B378FB1170DFE0205BE06
-:108C6000DF91F644A511E6EF2894E377D2F7453774
-:108C7000ADD9BD0EFADFBCED50A511E7BD548EFF96
-:108C80005A65B911C69D26CB6F58B1EC4812ED71EB
-:108C9000BE5319338D88CCDF9805E3A7CBFABD9579
-:108CA000B3A0ED3B65CDE54618FFDD6DEFB41525AE
-:108CB0003036656E99DD0BE5F7D3CE5726017EBAC7
-:108CC00019D029943F48EBA7F93B5483E8FFD336EA
-:108CD000EF349C4F602C7E57029FB5551633D660FB
-:108CE0000DBF8AE4DAB43E6075C13F262B9C4EACC2
-:108CF000A6666F2EC0CEB4AF2C944BD369E7F4991F
-:108D0000171A877A6CA03C06CAE334E52C5EEEDEC7
-:108D1000C8EE88256F83E95CEE7527C6FE3E318D6F
-:108D2000CB03801BE993D463CCBB37865EC94EB3BB
-:108D3000513F871359C09A1EE1B779C0C353812FA1
-:108D40009995CF53F633487FA4713DCB02F3D2916E
-:108D50006FE66217B0F4428F1240BA66CD49C15136
-:108D6000483B2C645C80FA4335D07C9DAA72471541
-:108D7000F4E74A64FE2E783A331895A1BDB7CB16B6
-:108D8000E9EF0D41F71585BE0EECAF2233BBB8B548
-:108D900020D20FCC7B937562D4BC8D53D3F1FBFCF6
-:108DA000E2BB8B34F02CE2EB003AA07630CCD3332C
-:108DB000800FBA7BC78ED80AF3FB5027774B7BE72F
-:108DC0009B18D4DB9C2EE4899BB7779673F9D37FED
-:108DD00077527017F2A7D5538C7892EDE60AB897C0
-:108DE0003F30F78758AFBED7C42C506F5D57592618
-:108DF000BB8C5EACFFE27A169CA4291B4366943BB5
-:108E0000F55F4CA7F7E50FBC61463EC57EDCB0AE12
-:108E10007509DE4C0FC2AD3536FE196BA179D47FD2
-:108E200091C60293B4EF399C22FD3BE8FB95D61521
-:108E3000E94F65C18CCBF567A6EF0370370AB89B85
-:108E400063CFF35E49A7006F8386BE160A7A03E9F3
-:108E5000E7457978FC96A25D28EF23E36EA476DDE2
-:108E600046C023DA81BD896EB48B4B8D5C7E96F64D
-:108E7000A6DB034A843E245D48BC76A73797D17AA7
-:108E8000AB14FBAE82C1F3FA6B392FA14F3397FAC3
-:108E9000D5E59AF9497E80FEBB45FF2553897F9E23
-:108EA000E0FC007CB30CF917ED165C8727346E7E6E
-:108EB000F2E0F97F0CE485F5018F1CFEDFB005516F
-:108EC0000F48B80D867FEE15F0994FDF4B7B0F9959
-:108ED000719DF571F8F6DBE929346EE6B1508A1B15
-:108EE000EA9DB57379D5DD3929E17AE48BB9068637
-:108EF000220CD78DF66AE980BCBDE1F599A01F323E
-:108F00006519E5AD1BF130207F43566BA47EC3DFAE
-:108F1000DD306713D4775800FF4564875A99C69FA0
-:108F2000F8591A976353FD2CA6DDD2929E4CDF258B
-:108F3000BCFF7E7D39FB10D6F7AF76CE9753C301C9
-:108F400005F122F95A2FA78E083C1EFE1F9353CA23
-:108F500015E454959053FCFD6130F3B19ECB151A86
-:108F6000A7804E5CF1FAA451E8CFDC93A5BA3F028A
-:108F7000BE5AA078863D03FD565BDD9B93DD113A1A
-:108F8000A96656B70DE10E46D325D4FB7313A88C02
-:108F90007F68975C6857381D32776AF5B8F8724871
-:108FA000CEE39E2C338DB7E2C151A97EEDFC849EA9
-:108FB0009867093DC30A07F3B92CC3FC1B0CAAE64A
-:108FC000BB8DEBB3AC64EF87698087B7145643F36E
-:108FD000D1D94BFF21FC36BDBDB449D8914E342FB9
-:108FE000898F0DE49C66B659828C3709A09F9AD967
-:108FF000C904BF860CF51A3AB8989647F358BA18C0
-:109000003E4E00A6B4BE3CE1230D1F1DC1F9905E8B
-:10901000084D463E05B119358FA5AA2F4F41BB35E6
-:10902000D3E24139037822381C4E60C60418F73564
-:109030007822DE2AD4BB0F9A1C48078AA795A0BFC6
-:1090400053D8A72C84FA66DE8C24B25BD997F78EAE
-:10905000AC0278389338DD423F56D18F95E844C84A
-:10906000BDDFE65FBD0BF593949F120FEC4B95FAB5
-:1090700093DF0F2B557976281F765E55DCAA44DBEB
-:109080003F680F45ECA7C40767033F4EA9EC0C19D6
-:10909000EC285592E77C0BED70B09F12603D19E90A
-:1090A0005C0E1C2E08A829D8DF285807BC7A35D1B9
-:1090B0005FD46C8BE0036C1C3FE2CF6586A78DF319
-:1090C000073EBBD23932AECFE0CFCDE2E94AE1F57F
-:1090D000F5F4F6830CCE9F6B150EEFAD655C4EE894
-:1090E000EB8D17FD36580395AE115AFBCAC7900E8B
-:1090F0008D8CDB5913D2059D947378953FB0341550
-:10910000F5E6E7BD0B535951448E6E56FC760FD4ED
-:10911000DF6CF27D9FE21DFFA032F447CC697E7BBD
-:109120003AD4CB488AED2F57A7F3F966A03F0DF547
-:10913000BE27FC1DD317D7909F7D23DA65F03D2510
-:10914000AB9AE439C2D00DFDA6B2FE805D83BFD4D8
-:10915000A98628BFC1F4C5786AFFD5ED86E23876C6
-:10916000434994DD20C7D5DB0FEF6DC8A2F9CBF6DC
-:10917000CBB2DEAE609AFAB7B3F066ECEFF675B933
-:109180005171A27876C75A8127B4130231E7658EF0
-:109190007AFF1EF88901EDF8A7F8F891719380D154
-:1091A00022E34E48F7D6A5133F4DB39FBC061E6081
-:1091B000BB5F5249DF90DC07BDE4DD69237D548944
-:1091C000F25AFA47C8F7F654E4EBB27BD3276BF4B4
-:1091D000A368A797439F087FFA13A167528F497B23
-:1091E00031D1AD28117D33585F093DA3938B57B220
-:1091F000AF815E035AFDAFEFF787E97FAA5D59188B
-:10920000873E46FFB7D895A5D3FCEA38949B950ACC
-:109210001B058F29B3A2F5FCD3E9DCFF783A3D2981
-:10922000CA5F99BF34BADE2FB0DE647C260DC95FF9
-:10923000D1EA21454579C7FB6B14F45070E62DB394
-:109240001BE4EF19B483A0DED10CEFF348579B1257
-:1092500053C6A37ED8F99FE56376C2BCFBDF3479A1
-:10926000766177FB387D942D59D76A84F7A64EC571
-:109270006E6191F9D9D6774D5805EB3D28F054EF42
-:10928000E0EBA87784CC2361DC9C7A3E7E5EE741EC
-:10929000C5A8916F79B5BCDE6FD24D51FAE6B758CB
-:1092A000867EDE94FE070BB65494607DAF712B88EA
-:1092B000BE9C4E85E2C139CD0000A0831C0FEFDFBC
-:1092C000E6092A2B8B22EB6C335415A15E687325BB
-:1092D00079502F6439FCFF80EBAC3F1E0A2198A621
-:1092E0001CEF35A27D37D1E17D87F84AACD3ADDAEA
-:1092F0007350AE261DE7F36BD7D13B63DF15F3DA6E
-:10930000C5E5ADCA8E30C407CA0E18CFB5710CE9D9
-:109310002559DF952EF4848BF99F25BB8AB531C280
-:1093200017A375B8368E26FB5EE23362475D3D11AA
-:10933000EDA8C28742C615D06EFFE386CA5876E212
-:109340006702EEB08E3EED3AE2F185D463B29E291B
-:109350008E1F2DE93DA932B67D0A1A80BE972D7168
-:10936000DC8AEBAEDF6466162502FF890E9F21C3FF
-:1093700089F8DAA9206C247D6D4A7F4AC985F5DD1C
-:10938000BB86D955167FBEF5EB9F9BB04AE36F4174
-:10939000FF848F9D6656ABD5A7D29FC8C9E0F6F46F
-:1093A0006A872F0DC76DDCB7CD8CF85DD371C2AC69
-:1093B0008D770F5AC710E1A5D4723FA5BEC61AC457
-:1093C00075962D3112FEEA369983288FEAF7768555
-:1093D0000C684FDFCF3CC8EFF59D5DAFE6005C72D7
-:1093E000EBBD935577A4BFDCFAA082F3710111F6AF
-:1093F000929F1732A37ED6D335DAC36897BC9AC042
-:10940000F9FD5C992DA000FCCE99FCF558EF5C7637
-:109410009227501081F76B5DB38F28C0D2C9CF5A05
-:1094200042F86C33ECCAB242BDB6B1660FD2D14439
-:1094300087BF3403E0946EF47563FB3447B2A7052D
-:10944000DABA2D6C22E9E721C2618A8E1EA6DCCF32
-:10945000F9A4362345DA7B13510EF93278DC156313
-:1094600042289F5E35F1756C627CBE5DE9DE0AC400
-:1094700013B3A7D3B839F52105ED7DFDB8117AF204
-:10948000DE9CF115E81BEC3C33CAF53A2167CA961D
-:1094900074281F6AE8E0563064B05ECEDE9D0AFA9A
-:1094A00081F0BDA5C241F59905E5CC5EBE1F51070F
-:1094B000DFEFD4C815B98E18F26539C2D776BCF77C
-:1094C000152E5F42447F72BE7A7C3664B869FC1BFD
-:1094D000C12CA0F7E6C01837F4F7EA8844EA4FF247
-:1094E000BB9E3F1B049DE7D474281837702471BBC2
-:1094F00051CE4FD63B9A31F36E9CCF94CA5E8243D5
-:10950000438D91F026E75361F68D44FF6B83E8EFBE
-:10951000D0E2F7CD61286FFFD551A2C78676C54B43
-:109520007E41FB51F3428CCF057EA6623CF6666E0F
-:1095300092B0477E7994F4C8CDDD3C4ED0D0DD6545
-:109540005C698BD069C19943B7239D35745A5882A1
-:1095500082F8E376AB9E4E41BE10DDB38099F6B340
-:10956000403E06489E327F01FA2352FE7689B81F9C
-:10957000B3F1F77F27E62DFB8DC8CD04A2F7823328
-:10958000130F59019E0D1EC503A612D8DBBC1EF495
-:109590001F22F9CBD808F4CB64FF7AF81D10F679B6
-:1095A0000C3CEF40B8EAF588D4AB053B66327C4A08
-:1095B000FC1905DC65BFCF6498A9DF67328CDCBF7E
-:1095C0002BE3F1EB4D26AE3F36B55883C8D7AFA598
-:1095D000DD7844190F704A3787F079D8B0A21EBFE2
-:1095E0001FCEE1F368336C1CD3CCF5D7CF713E8727
-:1095F00016A7302E9FB83CDAFE1C9727F5011BF901
-:1096000089F5FEEA55B4FFE048F0A0BDCFFCAF9865
-:10961000172647E8418F5FF7B307CD6EF87E7327B3
-:10962000E78308DCB89E92740B728EF0DE952EF7FD
-:1096300023FC050857F0DF5B30CE20FDF794A5BE74
-:1096400040B27B30BF6608FF7DB2F0DF4D53AD7F87
-:1096500051FFBD6EFD6FB2B1BC36EB757A4A7E012B
-:109660003F318AAF7E2FF01D12CF0F04BDD4957409
-:10967000123FD47DD44C7C64ABE4F2C4763C5A0EE9
-:1096800032F6B7C22E7888E05091D479A38AFEF0E2
-:109690008F157B2B8B3FEFBB94E6FF7F2DE2A54B15
-:1096A000A57D29F62558F5A500D704010351EF3310
-:1096B00041EFE7F60022902F8DCDE6CBD9BF57EAD8
-:1096C0009785DE5610DF7502D6E7F6965FFB2F18FA
-:1096D0004FDC93EA19054B3FBB77C15FFD0BB43FED
-:1096E000D731C3837ADAD1EA23FAE9772678306E64
-:1096F000E850C1B2057A68E97C39E57ADC177B7AF3
-:10970000C244949B490EEE079E794E5D8FF0D9F8C6
-:10971000D35F4CC7EF75412503EDC6737B7EFC47D5
-:10972000D48BB51D4DE869B0D6A75F223BDC10DCB9
-:10973000C9DFEF4925FBF2F44FB64D47B8B776B60F
-:10974000D2F7333FD949E5433FFDC5817F477BC30E
-:1097500097E2C17A679EDBF69D7F473AAF4EF1E014
-:109760003AEAFD46BE6F2BE95B2FB7BA0E129F4A4D
-:109770007AB919F52EC2A986CB1F49CF1F887DA5BE
-:1097800015E5B63694671F6C4DAE8D154F9C20D6EF
-:109790008B31179263350AC5D3DA806A30AED19621
-:1097A000C8A6E233A92864CE8571162FED9A4E76AD
-:1097B0004FE0C46AACBF605F02DB4AF1370CDE8267
-:1097C000FD4FA4CED838108327C14F86DE3B2E81B3
-:1097D0007DFD0EC807D23B3AFB7F41DBEB7F403972
-:1097E0005A6D0D1F74BA23EFDB449C06EA93DE2901
-:1097F0005D173B1E3AC561137CCBF5664E77559ECF
-:109800009BE484C5334A63970E3BD6BC15C410CB8A
-:10981000A9EDBD11D771D398E593882E30CE87FA84
-:109820002760A3FE1B304E097C56E910F10F3B73F5
-:109830005C07E3571899C3864FC6DE36911CD94D95
-:10984000FD82FD417695FBA5C5BBD11E79C4E4CF51
-:109850009E8CFDB409BDD5C1E70DEDEDB85F0AFDE5
-:10986000D9AF9B48FDF49AD2A97D80B79FDDD1A2E4
-:1098700044E60B949A8F7A0BFB2BB1A19E09D4106E
-:109880007EDC665AD719AC924DEB1EBF6C5C847FB0
-:10989000F5F11D9467B80FBCDA51B6DCE18C3C657C
-:1098A000DC470FCFDDE2FB470EEF7207CE634F467A
-:1098B000945E8967AF1C5A7C9EEBDF174F90BC69A2
-:1098C000443AC6F1FD1F45E9DF95928E5F38417439
-:1098D000BC721FD7BF8DFB8ACD48B7673778D98751
-:1098E0006080368A7DD64794F06A8AF3BC9060C760
-:1098F000F8DD79A16FEA1E3A7112F74747ECCB26E3
-:10990000BFFEFC0B0935D8CF618381E07978D7356C
-:109910003B5B15ED3CB93F007630916A23D8A9DC5A
-:109920000E5EB50DFDB3865AE641FE6FD4D14FE30E
-:10993000BEA3442FD20E2ED8317F15B73F133C095A
-:10994000E8BFCDE2F628037B14EBA7CD0AB69889D1
-:10995000BE8A4B91BE0E2D3EB005F578E32C66C74E
-:10996000FE1F19E67D2197D6A330CC6779C4D43E7B
-:10997000D308ED1FA970DB019200B70EB27BD91896
-:10998000B3D073ABC85E6ECCBACD437CA697072F1D
-:10999000B490DDD5E84EA4F9DCBC4FB987DB2336A3
-:1099A000C6E7AF107DDE1CBC3E88FBCA9F08F849A5
-:1099B000389E37F5DE8EF038FF4B2044F87EF32CCE
-:1099C0004EAF69B33A498EBCF6C26CD2E3922E9385
-:1099D0009FB7903E4F37DA150FE9B505162D5EDBC0
-:1099E0004D5C2FA5093D53F810C7EF2F043FFDC272
-:1099F00061104FB3A073116FB107C6A3DEFD44E041
-:109A00009FC408CA77214F1A5685889FEAF7F2FE4D
-:109A10001C166FF1BD1AFA759473BD28E3FEB80FDA
-:109A20005015435EBC2DE651B063C536B4976F0246
-:109A3000BCA34AC91923E428D005C22DA7D6477470
-:109A40007093E32E8F5A40FB07E427F6B79859AC82
-:109A500038CF31B12E6786AF04E3CDCECC64B2737C
-:109A60009C6A992101DB152B9E5D6EDADF243BAFEA
-:109A7000DF99EDD915C5EFBE1203D43BE54AE67870
-:109A80000EFED6387F1CF2A15BFAE95176DF607FCB
-:109A90009BDB8D73DB03E3D10F91FB17120EC19695
-:109AA000C41AADFC7C5FC02178358FE7837D6FA33E
-:109AB000F8B51DC641BF7ED7F53FE17E7D2BD57B36
-:109AC000CDC1E31915B03EB4DB9C85BE755C9F2605
-:109AD0007B62C163B543DAE5B717A35FD9586DF36D
-:109AE00020BF6D7F515941F48CC141F4B7FDAB08E3
-:109AF0000F0CF080FCC0FCDC2F6D6CF60563D37B93
-:109B000015F15F23F29F42F44EF176A0F720A7777C
-:109B1000AEFFA4DF8FF2B12AC67EA8942F8DE6F0A7
-:109B200068A463C90F8DD3C3A3116E439527E74D76
-:109B3000C0FFC83F0007E41FC92FC9FB399F6C6DE8
-:109B40007197E1F7AD15CCDEAAD1477A7F09E78995
-:109B50007EA794EB590E5FBA13E30086D016CCA310
-:109B60009072B871FF83A363E5B949396C3572F916
-:109B7000660D26055B35F4857B7BC913E949793B86
-:109B800049EB63C745463979BC6EA879112ED4E5F7
-:109B9000286F762505515EC93891BEDF4CA7121596
-:109BA0008F917E0BEE2F60FD3227B7434A9C9C2E8F
-:109BB0006F72CA786C30CAEF711BFC27309F289EE9
-:109BC000FE92EDFE52712B398ED4A37AFCCBFD119F
-:109BD0005C4F5551FC7AED07B97CD2D3E37C617FB1
-:109BE000A5E25AE17F3F17FB5983F1CBFB6135C6F4
-:109BF000A8FCB73643576DACF8D7C10D222F6ABB0E
-:109C00007148F9753F17F5BF27F2BFD85263543E2C
-:109C100095CDE36EC1F8E9841E77B14AE3F2385678
-:109C2000F274F629EAE194A9ED63304FC9E98BDEBD
-:109C30001FC9AC498CDA7FC8F6A74795736B73A22E
-:109C4000EA0F6B1E11F57DF8FAB151DF0B0213A379
-:109C5000CA856DD745D51FD53E33AA7CD5A33745D8
-:109C6000D5BF3A383FAABCB5A5B306F172CD9E5B0D
-:109C7000A3DA4D30860DC5F07E5CE78AE83C311DE5
-:109C80003C67FE518D49873F7016103E27EC8B864E
-:109C900047EAD46878605A1CF697CA447F897FF0F7
-:109CA0005C2E8F3595193F0BCBF60583E98159ED75
-:109CB00025DAFC8308FD04A3F2DF661A55DD3C02B9
-:109CC0007F12FDC59BA7DC5F8BBB8E3870DB27E462
-:109CD00084848B492C2B757ACD65E162BA125C586D
-:109CE000D83314B8E8F7F706E2CDBAFE3626355277
-:109CF0003EF0DB58D0D8C761C147B2BC2890CAF546
-:109D0000906FC115EC681E07F65BF8FEA4FEFB45DC
-:109D100021D79C300782CF10F9FA7D8187E3C8D71D
-:109D2000E870EAF97AFDA78733517E5732F29BED4E
-:109D3000CD2D9FA2DEBAC31862C530EFED623D8F14
-:109D400008B9F0E8063BF5F398D87F7C7C839BDE6E
-:109D5000EFD830869EC10D1E7ABF6BC3547A7680D1
-:109D60003D87CF273754D273CF061FD57B6A430D6B
-:109D70003DF76EF0F3790DC2172B253BC7971133D2
-:109D80005EBA3CA00E094F4CCD8BA92FE3F6A32E53
-:109D9000BD6C1EF9FAE34BE6BCA2E11B8B2BD9414B
-:109DA000FB9953D814DCCFBC52FB8B1B6AE6BC3248
-:109DB0006AE87C24E9897D9931DA17237EE417F972
-:109DC000936F3B2F6E0DD8E2C32B4267B1E1546D08
-:109DD0003D9F83CEFA78B41934ED8FE9F8B8DA9F55
-:109DE0001AD36E287771FAACB1F0FDF7253AFEEE82
-:109DF00010DF3B5CDC2E7C378E9CB9CE6510FC1FDF
-:109E000030D17EE020BEFBDE0DB1E0DBED7247F12C
-:109E1000F112BF0EAFBA7EDE35B50FF3C4E0B32B3F
-:109E2000F523D7A76FB7C9C5E5D6AEFFA3FCF9EEFA
-:109E30009DC9E43F20DC9C9AF5BF7B67524DACB8CE
-:109E4000CC5E17DF1705EB9C15A493A91F30A3ADBB
-:109E50003886B9F93EEF483BC687641E407C7A35A8
-:109E6000521C8960A80E862BE0C36D2E84FE8D03E4
-:109E7000E3848C388EC710D16F9853C334E73CD439
-:109E8000C1F400ED0366CADF09E750DEE357A427FB
-:109E9000A63E3EEA72FB7483DA7F4539B3FD6B96CA
-:109EA0003392CFD9970F8F8AA5276B50CE5C07646A
-:109EB000E82AFE6EA0E8CAFD7E55F8D5A861DAB79B
-:109EC0001E32FCF6398614975A6F4D198FC6D5C5C8
-:109ED00004FE0CCC64FC3CD6FB0941B4F343629E07
-:109EE000E0F84FE07E75F3147CF664F90EB9A0FD3E
-:109EF0000A33F713F35CDE975D502F51EC039B336D
-:109F0000CD5BF0C9EC7C1DE3311F14BADA6270E757
-:109F1000E33A3E523C57A39F6237043DF84C61A19F
-:109F2000713CEF2EE847FF2CE39A4437FAB789A338
-:109F300019EBA578B82701E366E6A4F05B23D19F6F
-:109F40007DD148F1A1F198CF06E5F17F9F1B0C90E0
-:109F50003FE726F99021E0B615ED70683F8FF9DFF5
-:109F6000C5F99EB65B030698D7C3951313301F2A15
-:109F7000B4470D98F1BC42EFB9BFBB19D63DA1570C
-:109F8000A538F30436E9F59128577A4DB4DF5B67BD
-:109F9000640F21DFC483E7D96FC6CEEF2ACAE4720B
-:109FA0004FE66DE9BF2789EF67E3E411FF87D00B28
-:109FB000323FC624F3639CDECBE6C79874F93126A2
-:109FC000A38FE13EB069203F6629A3FC18E8479BB8
-:109FD0001F737666EC79A8997C1EA62F92E2F49BFB
-:109FE00042EFCF8EB8FC3A4D5F2444E55947DADBA7
-:109FF000E87DBCFC9C3C09A738F9495903F3CB66C2
-:10A00000810C6D3B4EBF9171F2E8BB4997E713F9A4
-:10A01000CEF37B36A5713A399865772C87AE97B326
-:10A02000B009E9F40E9BC384F1231FF374D1B91D69
-:10A03000A3A93F2CF96E04D6337E8076B601242D79
-:10A04000DAD977AC377D10D6C8A92A6F7499617DAB
-:10A050008DDC5D9FC568BE8963C7505EDF05E64E37
-:10A06000B55F466E2EB5AA56A366BDC7E3D80D7E72
-:10A07000019FE3D9B1E13727D31095A734B87D4AC2
-:10A08000D479B47BED979797085F7F86B67F3D1EA6
-:10A090001CF4FD4A7076B672FEEE2F5378FEFE5F1A
-:10A0A0001CDE69229F8D9F0B30E9F2D0D767B9394A
-:10A0B0005D0DCC9BE7A1BF6CF7ADC8A476EED1DAFD
-:10A0C0007300DD466FD244781E1772470F973D022A
-:10A0D000CEFA75778B7CFA4495357769E0AF5FEF00
-:10A0E000E3028FB2FE2613DFBF823F9F15F0B28CD2
-:10A0F0007139DB9A3942E485A719511E2EE55DB00E
-:10A1000065F657693F49C27910FC04DCF570F431FB
-:10A11000F7ED98B77D25782E3F9A6846B97FBBB595
-:10A12000FF30FAA6E15EC33B23E179C236F2640751
-:10A13000C37DB731CF1F62180FF1F0FC09368BECED
-:10A140001C2590AB5EBA66E876CE9614FF18E48BB9
-:10A150008F44BEB5D4435B72CE8CC6BCF9D4F4B286
-:10A160009A2C27C5DBBD19483FBFB670FA79147A1F
-:10A170008272D381AB77A27E69C9F22FCA9A1CC9B9
-:10A18000DF63DEFED1987FF055E1037F26A49F2B8D
-:10A19000C1675B26E37C98129B3E8EC4A10F3D5F96
-:10A1A000D0B9B292AF8F2F243CE57E859CDFA22CE4
-:10A1B0004E7FF229E1A6CF1B5A946510F5B8DC68F2
-:10A1C000C9F2119CFB867D7A3201E67E5C97E73509
-:10A1D00020BF86B87E09EFAF4BFE1E4F8C3DBFFE01
-:10A1E0004CBEAEFFA9F92D91F31B1F7B7EA6ACA13F
-:10A1F000CDCFC7FADF4FFB1AF417E07909E2996D6A
-:10A20000EA27B9783C3DF63C470E799E7ED3D7A12C
-:10A2100067257DB3C0F25ADAA7CF4A8CB94FBF0881
-:10A22000FC26F47BF4FBF5725F1EE407ADB7DADAC7
-:10A230007F7B06E27D9658B78B85D2701FF38085B1
-:10A24000E2FEFAF55F23D60FF02A4639C5E6F6534B
-:10A25000FCE2F8E8D872A1388BF3C540FD363E4EDB
-:10A26000BC7305D70AFEBCD2B90256E2A7B85F9903
-:10A27000D51652010FF7087C9873D77AD02E2CCBC5
-:10A280007AE318AE13E07F6E009E9A3CBE331B8EBD
-:10A29000D8479AE2CBED3AF5D9D2E618EB99E7F434
-:10A2A000CFC5750CD4DBF3BA7DA4065FE358D8C0E4
-:10A2B000CF45F71BA2FCE14CF695FC61AF95F34B43
-:10A2C0006ABA8FF401EA07D43B5BF65F5B8CC84443
-:10A2D000FB02F378FA9313498EB6E65C37C6AD817C
-:10A2E000676396B45BD538F6E29F97F71FB19794F2
-:10A2F00028BB35D2BF91DE4BFC94D9FE5F4C7CCCA1
-:10A30000737AEF453A1C9DEE5D874F3DFC020F4C82
-:10A310004B23FF18E13723D2DF00FEE3E0F9C74EFD
-:10A32000EF77B0BFDBC4F91945E6EF0DC4298CF611
-:10A3300093D608BC878A97EFE13FC03FDD91E5DD0A
-:10A340008A78315B043F321B9D0B97F60AD3D935CF
-:10A350006C2ACF275D96F5C61F30CEB32585B3ECAA
-:10A3600096EF24505EDD1D8ADD8CEB06FBE3BD1FFE
-:10A37000417D3F0BBDF76DDAC7927646927A296927
-:10A38000E8F3947EF295F2A80FA11D06F39969B047
-:10A39000D1BEE621209B6C901B33CDFC59361BA807
-:10A3A0000AFA9BA9E6F584615E9FB373E93740EB37
-:10A3B00044114F5C77747202D2E54CA3E98C566E5F
-:10A3C000E9E31C5D59D1718ECFD9DCEFD3DEEF18F4
-:10A3D000EEEF3F3C7766A636CE3210E710EB581012
-:10A3E00058CEE5A94ECE497966B0F2FB439897B9AD
-:10A3F000ED2E8A1771B883736D84F20DB28CCE097D
-:10A4000094A7092429D81ED67D8378B215FE2C94F2
-:10A410003398BE83E381D79785CFD66B3D6E7CCED4
-:10A42000507C463E8F20CF3764CD7958DF600DAB2E
-:10A43000FC5C1ECCC085EDE578BC9C2CCA9BAA2F89
-:10A44000DC7EA77B70FC82D992C9DE358B799DB604
-:10A45000DB0206786FB1854E535EAA78EAE31C17DB
-:10A460000D8100E6657F4B0DD27C935828D48B710B
-:10A47000092B80C040F1831348A7E0D534E23C1398
-:10A48000EC1742DF6698DFE855B09CA1D3474EDB5E
-:10A490003ACA7776FA8C3A3DE457906F326BF4EF14
-:10A4A000A3F593951DA773404AC8977529E3CA7110
-:10A4B0001A7D7CC63493A3B87F0DB77BDF49E4EDEA
-:10A4C000245D28D95CFF34A69B19E5B9B8AC56B415
-:10A4D000DBCF279FC2A396A837DA506F584D5E8214
-:10A4E00087D41F0DDD7733C44FE3BE2A86F4FA4FBD
-:10A4F0000ADFF70C2C53283F41DED75053C4DE84CB
-:10A50000966C59F6086AB7F0887F593D94ABDF60C6
-:10A51000E34250AF7886AF02EF65691DC73C1BA1CF
-:10A52000DC9AE07FE697B89EA32AF5D324CEC33207
-:10A5300066AFDB0BFDEFBC7598672B2EA9BC7F0BBC
-:10A54000E6FFF43FC8EC982F32884EBF84F501FE39
-:10A550007F82659877D32AFF13F741FDEC37988700
-:10A56000EA88EFE88B20DE14410FF87E06BC6F12FC
-:10A570007453D8A3F07D7B8785F226D8B14CE2973F
-:10A5800085563E4E534FD9BCC930AFC2DE4944C692
-:10A5900023A13EE635616601CFAB63E427EBEB8F89
-:10A5A000C4FA6E8A52F17C9A1C33DD7BC4849C9B76
-:10A5B000A2E3B7EB23F44FDF8B45B949E8A3283E6C
-:10A5C000C17EC02FF796F26D7C6AE7E0FCE061F295
-:10A5D0008FF3ED752CF287FD9647C621F93B4B7C36
-:10A5E0003BBC640EE5734F31860E225F5F2F9EC524
-:10A5F000E2897C6D05382E36361F76C27AD2D63384
-:10A600004F0B8EB2D4DD8AFD95309F8A702EB53FF8
-:10A61000D88AF3BB76E9D10CA4AFEDD985447FD3BA
-:10A62000AC9EC2042091D6A91E8F1D5ED52C550864
-:10A630002E0B6BAC41CC5B5B38704F8FBF6011F061
-:10A64000CD62BF22CECFFB0B966AE2B0329F6F91F4
-:10A6500005FCE718727A7B36B78764FB2671DE4407
-:10A660007E6FCFB6D1F76F66DFB82C9BF22A789E4B
-:10A6700033F0BD3F7B72448EC0B89487B280794D71
-:10A68000B8AE05826F25DF2FF4DE4B76EB425FB468
-:10A69000FDF94F0AC777608942F6E0E29ACBDBA763
-:10A6A0004DD9729F37CF7E3229F25ED29594DBF37B
-:10A6B000518FA3BCAD04BDADB18F977EEBCB346A97
-:10A6C00097F964C3A5E191F32D4DBAF32D8DE27C8A
-:10A6D0004BD3BE16930BE95D9C6F69EA39B1459B7C
-:10A6E000D727E134F87C4B3FE5332E32070FE2B930
-:10A6F0009F456B618D50FF65711EE2153C0F313136
-:10A700004247C9B7268478BE9C97F2F6F2EC491E00
-:10A71000CC3369334CA43CA1B694648F362F676B5D
-:10A720004B7305D693F941F23CCBA238FBC08F673F
-:10A73000733BF91185E76905965809DE4E951DD3DF
-:10A740009ECF7716FA283F6E59B69BF0FE88882375
-:10A75000603EE9247806C11CE3F8E2EDF5F201FA67
-:10A76000DB84FD95177A282FA63C95E79739337C33
-:10A77000C5F71445FAADEEE1F978D5BE4F5FE5793E
-:10A78000B55525084FBD3C97F4A597EB407F9D48F4
-:10A790008F170D5CEF44E4BB6FC99DD05FDF9B66F4
-:10A7A000CA9B63F77B1513B47BEE75BB07CFD16DE6
-:10A7B0002AF35555D077239DF373D5B09005BE97F6
-:10A7C000BC61DE85F97AB5ACDD8CFDD5EAF4D65AEC
-:10A7D000DB2B66E4CFB51DA6083D32CC33F414A2C2
-:10A7E000A0ABDF3B28EE41F247CA253D1DB391D116
-:10A7F000F2A758CA5B900B5C5F2DE57A8E3DA9608D
-:10A80000FCA72FF9942AFC67927793A590D2C9F9F7
-:10A81000C93DAF91BD321DE403FA670A96C7537D67
-:10A820002A83FC1C8379A3D7B344A2AF41768298D4
-:10A8300057C9C0BCB93D24E562D9546E6A4ABCC050
-:10A840003844CF729F6E32DEBF03CFEBC5B8DF3224
-:10A85000788B420AE289050D856847F8C9DED1DBAD
-:10A860003FA5D6E6242BAC6F2A6B27B938E5F02B31
-:10A87000242701CF9FA09CF9359378F65851CE54E8
-:10A8800060C29F8ACF683CCDB66D37229C6667E96F
-:10A89000F11130225CE7B807E189CE0778E3E0C91F
-:10A8A0002BE5088B962305EC4B7E1EF9C157EF4331
-:10A8B000BFF74A76C821A7DF9C43F233DA1E899797
-:10A8C0004F979A63137EEAD0F2E9FA4CDC4FB88EC8
-:10A8D0008557EF5506D3C5F9C3EBD52C0DFD48BA06
-:10A8E000DC2FF2EB959744BE6E4932E9B9885EE4FD
-:10A8F000F82F15A5EB90AE34F8BF615F4248057A9A
-:10A900002B16EDAF437A9818D18B2183CD6D8671CC
-:10A91000B7289E363506DE5DE96ED27F930C5E95D4
-:10A92000EC29E6C9403C03DE8B105E53AD9DAD467D
-:10A9300098E749B3E747E8AF943137E1BD4CA75FEB
-:10A94000CA6DD546E4CF72AB1EBF5EC27B857DD09B
-:10A950007BC39F82F7E18877A93F86607F02DE2B69
-:10A960007262EC13C6C3FB2D7F22DEF5F8967CDF06
-:10A9700095602FB7615CB796E7114F7A73642B9699
-:10A980005D0D0574BEA52BCDF3327D6FE6DF4B7AEE
-:10A99000BD2ADE9B58B80EBE43B9ABC0578EE5A6A4
-:10A9A000F50AC9CBC96FFB5BB13CF27EFEBD786393
-:10A9B000F3CB78FF585380B7DF7F7A0BDD2311DCB0
-:10A9C00022DA97B59763B9A98DB7FF38D91A40FF36
-:10A9D000BAF458B015DF5FFD109F87B4EB66083AF4
-:10A9E000EB529E7D99DAB5F37677BD6A4DE4C96E78
-:10A9F000DC4E9B2ED639E371BE4EC7873755BA81E0
-:10AA00000EEFEC0F98900E4E1AEA4B495EC6F1B766
-:10AA1000CA94F63C7CCE06B9C008DF409F23789EDE
-:10AA2000E92E18626B0EB78B647E26E6895769F0B3
-:10AA3000B53587FB09B29E2B9DF17CE2C792C96EAA
-:10AA400095F9A3A11F3205E300B846D2AF71F249D0
-:10AA500067173693BE9C3D5CE691868D2B60DCE2E9
-:10AA60004BFF7A632CFF7A9B18F794C87B97EF6BA8
-:10AA7000830506F43FBA9078E87EB5796FA25DD27F
-:10AA800085FBC19AFB41BA0A78F9C78FDDFCB76D27
-:10AA9000E0ACDE6568360650E8E72B74DFC92DBDF3
-:10AAA0002C949A3278FEB38D2CC4F31DF8FC57B762
-:10AAB0009A776DD5D8E90BA5D898368AF448B5C0F1
-:10AAC0009394170B05BE80BFF7207F2FB236935D9E
-:10AAD000B844C8F7352C48718A353AFEAEB37DF6D6
-:10AAE000BEC180F1B0683E6E80E970BDD0BFE35D4D
-:10AAF000807FEDA3C976D4F30D9DD1F56A1F7DF358
-:10AB000018B7AFA2F9BC56F279309ACFF1A649E254
-:10AB1000F31F8EA5FD17799E2FC1DAFF7E8045D6E3
-:10AB20003BA0DF75FC9780E7FBC6A0DF62E079857C
-:10AB3000A22CC7BDD0CEF57000F4B0F07348D45E3F
-:10AB4000383E2788F4502CF857F271B1D0E783F4DF
-:10AB500075A5DE8FD94EFC31499424DCA57E867E16
-:10AB6000483FCBF382A097DFF4927F0FFE27CE738E
-:10AB70006C34BF6C55403E1744FC15C0DB3F23DEF0
-:10AB8000401E5B799CA29DA13C8B6BF7DBD6C5B4C4
-:10AB9000FBC18FA07D80C1F67E28CA8ED7E32B9E95
-:10ABA0005D3F80AF04B09792D08F67242FF7E17399
-:10ABB00008F91C20A7FF3D967E361FE2F5FA77269E
-:10ABC00050BC40C6C725BFF5E572BBFA57595E9623
-:10ABD0008BFB57A2FFE377CFA67DEACF9897F6A924
-:10ABE00031CF2837469E04EE536FD2C4498FA7C594
-:10ABF0008E5B27E772BFE71BB97C5D794E6F4A2EEB
-:10AC00003C4F99795CFC54A278A6F07D85EC81FAE2
-:10AC10005C4E4C10E55322FFFA547A743C5DD62BFF
-:10AC200016F53EDA60B56ED2C815F70F2DCDA8AF78
-:10AC30009C85225F7D1DA7D7BE17D2766AEF699BE0
-:10AC4000965BF60D9C97B3D06BCEC638CB0B5C2FC2
-:10AC5000341AC366CC2BB9C1E1BF0AE1D4E866DE81
-:10AC600067B11F77D8BC00E0DC27F6E7FB4CDCDFE0
-:10AC7000E84BE04F39AF69B955DFC0767D7787493A
-:10AC80003E0C94ABC2C4FFD3727D346EDF42F95DDB
-:10AC900094FF969799F00FCB045F509C37465C77F2
-:10ACA000701C37FADE992673EC7D6596971C159F0C
-:10ACB0005DD6C3E386B75BD9965CF87E474F26F92D
-:10ACC0000FB52981D1768AE3FD7971D7BE61BDB414
-:10ACD000AEAD65FDF98F95D03E2EC57D1A7A5E2307
-:10ACE00039D720F9A43B9A4F96E40E6DFF431F1706
-:10ACF0001F02FFACC88DC13FCFA37E3245E07F8FDE
-:10AD0000C877AA50EBCB312E746115A373AFF7BC93
-:10AD1000AE123DDDF38C42F74048FBAC41C037DE5C
-:10AD20007AF0DC805B233FF0DC805BE39FE1B901DC
-:10AD30006D19CF0D68EBE3B901ED773C37A0FD8EBF
-:10AD4000E706B4E562B6B215E36C4D6DCC1E74F344
-:10AD50007304DAF6788E405BC67304DAF6788E40B8
-:10AD60005BBEC0381C2F3CAE529C1ECF1368DBDF8D
-:10AD7000F5FAA42CA49BEE049E3FC602DEDE2280E0
-:10AD8000CB2A01173C67A0EDEF6CCA8D4718D0DDC8
-:10AD9000AADED573F13961DFDAA8FEEAD47AA243DC
-:10ADA000D6CEE56E33FC47F2532D52711E9FEF5302
-:10ADB000584601DE1BAED39F3DDBB6A0E859138C8D
-:10ADC0007E5FC734F1DA82C171F98EDC64C7499EB7
-:10ADD0006B9CA38DD344E8C0E609E1FADF563DB190
-:10ADE000E8A0985D954AF199232AC61ED8C7ACF908
-:10ADF00091698A267EAF8387252B9A1E12DCD1F4B7
-:10AE00009034269A1E923DD1F4903A359A1ED2BCC7
-:10AE1000632F0BDF8CCA68FAD0C3772AFC87F09DBA
-:10AE2000883742625C09D68971DEBF147C7B75F07D
-:10AE3000FD9C4D2BB7B9E973B5B534629F941C697D
-:10AE4000A64D5A7DDC53C251DA09327E3999713FE1
-:10AE5000DD8AE72C0BD10EE0FE1BEA7F94AB27CDF9
-:10AE6000DC6F430A42397927F3933CBA53A7FFEFCB
-:10AE7000B26D37A3FE1FB45EB0B8F0BE40FD7AD10C
-:10AE80008E629A78925EFF2B3D4A28793C2EB74716
-:10AE9000CA65FF253276BCCA50E4C5719BF7739C26
-:10AEA0003F3A7ED6D2A8786F4C7B4ECE43C2458EB9
-:10AEB0006F61CD6A16D2F318BDFD15ED2F4BFF9AC9
-:10AEC0003AD5C4A3A57F2CFD133D9CD5E10564773D
-:10AED0004DB24BBFB8F7367C2FFD61BD1F7AA57D03
-:10AEE000A9050125FCA382883D7983782E10F122E3
-:10AEF00058D687BF87C6D314F7301C6FFEFEAB9CB5
-:10AF0000482F5B9466A69BDFB117A11FD5D09FC1C8
-:10AF1000E32FFEA8FDAAD79430CD7B11F36EC66750
-:10AF2000A388A73576BF46FBA88DDD3C5EC0F645FD
-:10AF3000E3456FEFAF659DE60265B0BD5FCF7AA9CF
-:10AF40003FBD7D3F884EAEA0C777E4C97B3B78BE4E
-:10AF5000001372A956C02B9E5F6044005F1BB9B7F7
-:10AF600013F8A12C6F72247FD6950E7E8C8A7918E7
-:10AF70006E73AC3C298697AA804DBAD2564D726248
-:10AF800065DBA0B88499F8A9FDF2EB9376C05FE584
-:10AF90003182FB883C37DF874A9C7BC48B9F4B7A8E
-:10AFA000F3B5E73E9ACCFCBC216B8E3E97BF3ACFFF
-:10AFB00020CF4DA94359FF60B8FE69F9F832FF0070
-:10AFC000E0B7460B3FB98F20D7F3C9E4DE27317EC7
-:10AFD000A826CFB2A25F9B9AEE6FCA73E2BD0CE1C6
-:10AFE000930ACA339B9BF243CEEF3BFD0EFAEF72FE
-:10AFF0007D8C851FC17B6D6BF7A9E40FD6EE7B9925
-:10B00000ECA2F8FE5EFBC0FD09627FE37E1C473FB9
-:10B010002F99CF5CA116A5863576FABC3C1E0F1879
-:10B0200035DCB711DB95FC2E2F05E76B1AD149F7FC
-:10B0300061F5DFC7ED6087CA6621FC40EF71BD6F27
-:10B0400033D2BE832329A0A6A01DB79CF1FBE73C09
-:10B05000CD1E2415755811C5695DF7A93EB4BFDF33
-:10B060005BB7320DCF29BB9257A515C2738685DF1A
-:10B0700047E3520C3E7EDE74451ADEFFB1CCC2F7C8
-:10B08000E50BBE99142A047E7BC9CCEF197524F90F
-:10B09000E9DE82FE3495E67366032C6D14EE7B7C4C
-:10B0A0003609EF1BC8F9D23611E7932DEEB3A8CFBE
-:10B0B000E3E7B7CF3E737112FAABEA251B9D6B979E
-:10B0C000F4E7288CEDAFCC17F06874F27CF7F3C28C
-:10B0D0007E3C2EF65B65FEFB3AB10F787CF4C0BD7A
-:10B0E000604ECC0B694CF0A62EC678C451156FCCBF
-:10B0F000609FD9BDA9696437F33CF675C27E382FCD
-:10B10000F23DD7CD999989FE45BC3CE997F2B8DD6F
-:10B11000FB75DD5329F34EE3C221CDC88C13E8BE85
-:10B1200025DFE5EABDF84735263C4F8AEFF1F2E529
-:10B13000DFCBE37E9BCC876FC47C7878B5EE85B29D
-:10B140004C76993CE946BC875C935F837E1AAEAF30
-:10B1500011EF21A7FB49CFD1FD1CD80FDE1776A533
-:10B16000FB22E70B3837621E7986F6BD9BBF1FE8CE
-:10B17000DF41DF9F12707BEA88A172578C79260E1F
-:10B18000E3EB1EEB34FA705FF29A10BFEF335E3DD3
-:10B19000797E3BDEBCBA67866FC779637E66ACF1A9
-:10B1A000BE147094F3ED4E0FAFF6F1FDBCD155C94E
-:10B1B0009AB2BD3F7FBE46BE4E11F8E9BE299C4FF4
-:10B1C000F700CCE1FE6B3C3C971A9B1584C31769D2
-:10B1D000FE5B50FEC97B8AF11E639EE711B82CBE50
-:10B1E000237056A3CE1D0C86B399BECBFEA4DC39CA
-:10B1F000FDA84A72E7F45B821F99D7A694A2BEE22B
-:10B200007C759AF1B8EEE976FEBB1F2BFC607B8261
-:10B21000FC58DE5137177FB763F5EE495B50FCE30E
-:10B22000FBFB41FE2CCF626C3A3C576C8ADE1FFB65
-:10B230009C3D447A6ED5437A7DE633A39C5DBD3D4B
-:10B24000BA7E2D7BE853B40F6A7576AF4BE85DBDCF
-:10B25000FDEB1926F27E4A59E95739DFF428F34EFF
-:10B260001946FA9FEFB74D16FBE9FAFA4FB8399C29
-:10B27000EFD9FDAF66FC29A078FD9E01793112FA65
-:10B280003DB7C14ECF6F0CF3CEC4FE970DF3570CF4
-:10B29000C338C4510EE70BF51756535CBA86DB0171
-:10B2A00016BC5C05FE69B9CD4A7EF40378BF18C0B0
-:10B2B000D962E1F685B4AB54F55E3505BE5FFB2F70
-:10B2C000ABD2707D8EA76757A2FFE17C3AC98BF89D
-:10B2D000D85AE62D46F9BDB5CA46FBC43B0DFCFE67
-:10B2E00041AB85EFCF059FBAF610868347766E9BFC
-:10B2F000897E86BDE76008E3126D06BEFFDA369DE3
-:10B3000089FBABF9784D3D555D38AFFC6A90F7D0BD
-:10B31000DFD6026FB15DD33F13F652A3C045DFAF56
-:10B32000AFFA3EDE77F5A32364AEC23A4750FC6B1A
-:10B330002CE37423F34BE8373134F1A273A07F98E8
-:10B34000E6DCF3D84E25644AA17BF5288E5DBF313B
-:10B35000E4BA0DF5E7CFF87EAD9C9FE3A5EC991814
-:10B36000EF97FAF436CC6FC338B0B07B9730F9C79B
-:10B37000F70B6A045D2F11F6EE6D491CCE2B9887F2
-:10B38000CE5DDD6A6529185FBEADBC7332DD7B5DC5
-:10B39000674A437B45C6BDE3E13D5E7CA6F1C964D7
-:10B3A0007E4F8ED23F1A3B398331909248BEBDBE4C
-:10B3B0009F8787097E1E2DECB491CC8BFB2C8D07CB
-:10B3C000AEA27C7C4B22DF5703F96645BC1E467D4E
-:10B3D0000EEB5EF3624288EF1B07C57D382C40FB05
-:10B3E000310732695FC151E8A57DF7F3A6703EC908
-:10B3F00003905F0AE8CEBDC37A6FC1DF6169CC01FB
-:10B400003B0ACAEF3EF1DE2D46A0C7C611E1D57852
-:10B410004FB8B2E3DF78796CF82496937628F3A8D6
-:10B420003C31BC5A85F2E81DA9F3A83D3A5040587A
-:10B430009376B8E6E139E233227EC93C61BA1FA8AF
-:10B4400071FF55066D7C70783EB737CF24F07A6770
-:10B450000AD81DF311DE63C2A3B5BF97A0E61B98FF
-:10B46000F65E65B94ED98E65C5EEFF45A107D68853
-:10B470007B7D6624B1B604BE5F1140FBEA959EABAE
-:10B48000082EC161E9025E61BAAF51F6A33FD72F22
-:10B49000C75D8B7A1BE5BA29FA1CD191615C5FC04C
-:10B4A000389B689C226F31DEC7D3383FAF18F10656
-:10B4B000F8320A7C19B91FB893CF0FFA4D1B4F7A97
-:10B4C0006412E689BDF225D42F88CC5B4F1F6F0B29
-:10B4D000FA58D3CAF799FAD30A898E662471FB8F7A
-:10B4E0009500FC408E8D16F01D9E9FC6E13780872B
-:10B4F0004C85FA6F15F0CBE3F5BFEA7A4F7E4DEB42
-:10B50000D5E0C98B79C7AFECBB9AF024D7C3D8B6C6
-:10B51000A87ECEB4E8DA4DE579298DE985D4EE012F
-:10B5200071BFBEBCAF18DB1540BB19E5FD93901F82
-:10B53000E47D6D2C309D9CF57A212D06EE5FEBE4C9
-:10B54000F9296CA497DF43347F6E89589F5DACCF97
-:10B55000AEBD8F6E800FDFEECFAFD6DC472DDF0F95
-:10B56000C07DA0BFA289A2BF287E8ED51FF2453C18
-:10B570007C64E573BAF88BE143CE5307CF0138EB17
-:10B58000E627E1897C4CED8AA2F949CE3369008F28
-:10B590003A7E2EF813C713F9FD0D7F25F221DDD178
-:10B5A000F4DCD05D60C0FD53D9AEADB3C587725E2B
-:10B5B000C6BB2DDD5501D47F4D3D6594B7D9F0ABA9
-:10B5C000679E0F40FBB5BFF8410A26D39E36B6BB37
-:10B5D000D0CEADDFBD39C58BFB25C6400ACACFD35F
-:10B5E00041B532D639C0C67C45FAD16447350A7DAB
-:10B5F00073E6A9EFDE82F0F8B7DD263BEAD1A63D7F
-:10B60000969085E2206BC88E82F2095E7EE053F44C
-:10B610004B9BF645DB496B7FFA03979BE829906BC0
-:10B62000C0332E2C94CBE0D9D861F2841C3C9E0808
-:10B63000C3B026D6BF05E7A76F8FF3F802F0DED4BC
-:10B64000A92EC7F3BCFAEF2049C80E6BEAFE2ED92B
-:10B650005D4DDA3803E0A1368EDD75477E74BEB5E8
-:10B66000840B0B3AC9AE69FDD90FC79FB0E13D9A73
-:10B67000BF49518AB4FA7223C1E942E7CA1FEF7782
-:10B68000C7D7ABE7D12EB068DB71BCBAF729B427B6
-:10B69000C17AF8B3DE144A413FBF7EA7C9039A9727
-:10B6A000D53FF39327713F84BD6BA17B0FEA9E3991
-:10B6B000FCCE7550AEEB3239E6F2E9DB1457043FAD
-:10B6C0004D6E6E9F487CAC7DEE30DD2F88EFD1AEA5
-:10B6D0009578A9EB3A6866E306C3AFBCF3A0F8BD62
-:10B6E000051D7E3A4FDC48F778FEECA219E9FAF422
-:10B6F000018565160C6E5FBBF3700AD21FC209FD8F
-:10B700004B89A701BC0DC257E896FD25548FE21A5C
-:10B71000F1F0E6CD677C9FE757CFFC1C7FFFAFF6CB
-:10B720009F2C1E5C7FEDCFEF4DC1757C6C6CE6F4F9
-:10B73000FDC4669717C6AD35055C767AF2F7B53B62
-:10B74000EE23BABBEBE87D2EFE3B1ADE6CC3545AE7
-:10B750006736AEEFCEC717D2FA56333FD15DED1341
-:10B760003C3EF1B9F81D063D3E4F0AFEF87897853C
-:10B770002E2DFA1813D1318FF02D55E4F9DECDB40A
-:10B78000F75780C54DE5CF457CE0C5017B805999D1
-:10B79000262EDBD4F1402FE2E7CC306F26EEAB0152
-:10B7A0001C02025E0ADEABAB1EADC8E4F8616EA3FC
-:10B7B0008C2B83FD5D8EEFB17EAFC99B303EAA9D81
-:10B7C000D8AFE7E3CBF804CC3B11F7FD3E76C53E9E
-:10B7D000B7E5182EF99FF5322D7DC5E3F78E078961
-:10B7E000AE3E7B9BF34D63B0AA92BEF79A4278A41B
-:10B7F000B83178B05A21796089BA6F69802E3A4C95
-:10B80000829FA3BFC33C8D8A16BE07785EEDEAED2A
-:10B8100096A87B102274638EBC2F88F0A7F4A3EE49
-:10B8200012FCAF5FAF5E1E9CD0C903F6B87348F739
-:10B83000C9D49B824F3E86FC0BFC8A7E66FD332674
-:10B84000F2F3CFEE7DF99D5B81CECF764ABE8D9629
-:10B85000AB7ABEAD7D76328BC5B7676D1E16936F22
-:10B86000E17D4CBEB545F669DCECEB93AB77C59159
-:10B87000AB89C3C57ECEC03996A254CC753FF35474
-:10B88000DD708A0BE8E02AFD59BDBCECC877C7948F
-:10B89000970CAF9ED2C051C24FD2E3DAA71B689C6F
-:10B8A00001BA957429E976802E07E55746C151FF04
-:10B8B000BD57C8A38173431BC14F413BF6D72AFD37
-:10B8C000FE491FCC650BC0BD6F6F01ED836E167610
-:10B8D0007E9FBD3F05E37A9B855FD18FF1C4D4C8BD
-:10B8E000FBFE049137E0EB4F49D3D845277AD414B7
-:10B8F000B4E3C2C1D8BF232BEFA70CC7F99D597978
-:10B900007EA942B5E5AFC7386D3BDF9F5CD5B23845
-:10B9100005E3197D3D85F43B4277BE0EFE2ECCB784
-:10B920004FC635035E637669E45ED3532C40FB95C6
-:10B930002B7BEA68BF501F07596DAB4EC5FD407D9C
-:10B940001CE42ECC83C23CE4C7A3DFAFC5F808E2F9
-:10B9500049474F7EA4A7ECC1F4543D5CF065312B00
-:10B960008EDA7F1572AD422DFA3EDA277DE0B7639D
-:10B970003C88A945BF457DFA39FAF1C8000127D1B5
-:10B98000699DFF94CCB322BA9674A7F7DFF5CF7305
-:10B99000BF7CAF14CF03D53FFFFBF13F82E7B9E790
-:10B9A000DF1DFD22967FF58FF9BF6783EB971FF8A8
-:10B9B00003F92B7D072C349FBE03AFE57F1BCBFB28
-:10B9C0002D1E9C6FDF460BFF1DE803C974DF74DF7B
-:10B9D000301E676BFDF5C5F161D2539B7812F27092
-:10B9E0007E4FEC859EFF781FEF55BDD0637163DC01
-:10B9F000A1E94012F9E14DFB13E87EF8BE5F5F2C30
-:10BA0000D5C68BFEDCF5348AF3167DC9AC06F35B34
-:10BA1000FAD2B8BFD6F4E2B53F692940BBF420DDC5
-:10BA2000575CFED27F8E47F9D3F72CB72BC03FDF90
-:10BA3000819B88DF1DFEDCF74DD978DE88915F7D24
-:10BA400095FB33F2AB07C385C3A10FE080EB02B8CF
-:10BA5000D03DDDF1E0B1EB7F2D3C3E257FA1BE67FF
-:10BA60000AF151042E0AFFDD919EE4A055A1F5F3E1
-:10BA7000F7072E8E473BE96C670BE9FD2BADFBE02A
-:10BA8000FFB9752BA1A1AC3BFCBF76DD9CFE570F27
-:10BA9000E7FA49CF0783E9FC57DFA4F2CF933D349F
-:10BAA000DF21F23F6EBFA27CFFEF5EFF7F01F65207
-:10BAB0009D150080000000001F8B080000000000A2
-:10BAC000000BD53C0B7454D5B5FBCEBDF3493249C0
-:10BAD000261F2008C19B2F51F2194802E1A7938429
-:10BAE0005050C409488B157000955F4822D89A566B
-:10BAF000DFCBC4440CD4D547D5565BD135A0509E7E
-:10BB0000CF3E530C96564207540AADD5D142054D4F
-:10BB1000E948AD480D6404157CA5E5EDBDCFBD99A0
-:10BB2000B9378988ABAEF55EB2C8F1DCF3DB67FFED
-:10BB3000F73EE7586F035F8713A03711E6EF28C47D
-:10BB400032053C900ED0F0E2C4A75AB20056777E80
-:10BB5000B408CA00EA764F0019EBD5BFFE477198CA
-:10BB6000FAEF903CE27B62C021E1F73D9F89EF7BD9
-:10BB7000CE1503961FEE90827212D6EFB32F0FD020
-:10BB8000BC9930BF03CBD6AE73C5612C01DA00CAB5
-:10BB900001AE546D5C9ED9FDF763523A95761570EF
-:10BBA0009D863D0940F337FC2A2E00387F6FD7B9B8
-:10BBB000F13E9CF722FD5C0BD0D38C538C8ED6CDFE
-:10BBC00065CFCE3F8DBF07BBD4BDF04EF1E358F635
-:10BBD000BC7034FF45AAFFE2AD51EF60597FC97DCB
-:10BBE000EFB52DC5F63BAE5419BEE8BEF7DAA08816
-:10BBF000F67B7011F5EFDD93E8B267117CFF180555
-:10BC000031FBBFD4BEAFF97FBA6F003FC01000ABAD
-:10BC1000EC7564237C0F4230A462793FC08C0E67C0
-:10BC20007F785651E3101A0721180A2083F891D320
-:10BC300057CE82242A377C2417D3F83933B2100E1A
-:10BC4000BF6A716F55A98785F1D03ED21DD880702B
-:10BC500081E25DBE19EBD62BEBDC1B78863B01C67F
-:10BC6000037CCBA1CD3774D60C09E76B6D41B8705E
-:10BC70009ED62116572BCEA3A896A0BD98CB77A908
-:10BC80007C60E87507685DC56983A036F622FE739F
-:10BC900002D60BB43AAE179F1B53C77F71B0CFA526
-:10BCA000E0FA716E0502B8253BC48CC7FE33551708
-:10BCB000EF331E027E97F3F2F1F4F825F064C68F9D
-:10BCC0008EB77E780270D07885FE8BF69FBE2144B9
-:10BCD00072A880E20F8BFD481725C2A73BC381F3F2
-:10BCE0005993EF706F90F8BBAA8CD7C659E8CF1A5A
-:10BCF000037E117F9EB8E2289E63E6E3FD9BF17C04
-:10BD0000B9F8D5E912077398CE71239DEE00C27F72
-:10BD1000BF2AF07E3FE25D92A2F8D5F166A6433DD0
-:10BD2000F14E7914FFD1728AEBFD314C48B888C8C6
-:10BD3000F557414123CE53234F09FB71FE331509BB
-:10BD40006E3BC98B0441691C969543AB00F7D193B8
-:10BD50006953A89C1AC13DC5C07BED79072831FB0A
-:10BD6000AB841443BD27339FC7573B861BC6F50CD6
-:10BD7000AF70D0F71A5796A1FFEB7149C55042E357
-:10BD8000A6CFA0F6AF655C651837FB78CFA6C5587F
-:10BD9000DE2885CB88397A0E2EA8227CCD54C71A8E
-:10BDA000FAED42B542F21CA991035B101FB5527027
-:10BDB0006831E2EDFA828946F8249846FBACB3205C
-:10BDC0006B61BF1BDC9586F61B2B661AE6ADF5D4BE
-:10BDD0001AEA754D9F82920630B9E90228A50063E0
-:10BDE000831D86F1A5077619FA27BD0A722296638C
-:10BDF0000FA9AD5496768752897D6D690EBF2519BE
-:10BE00005938ECADC6EDC0F80F1A5FA2B2C981F87F
-:10BE1000C0EFE7E24489F4623EF71F8B0BB422BC0B
-:10BE2000E72C011FE1E16E39504065FC883B8A2117
-:10BE30001BE064C6837232C10FBE632AF2C1C48F95
-:10BE400003AD54BFF64287EC233DBC5DF6DB4A8868
-:10BE5000EEB3127E4F7AB74302A27B9DD3E20990E4
-:10BE6000DD4AED285E1BC35F1F7E1B6EF516F6973D
-:10BE7000D74D7995119ABF2DC3B3712FE9CDAA3F44
-:10BE80002D92B3FBF703971209EB78C9A671DEEC8C
-:10BE900091384E4E9CE620BD1E5F2DF3BEE06BD662
-:10BEA000C0569C679DC51DA7093FDB57D774EB663D
-:10BEB00092EBF62CA11FE27F07AA84F0C7A7F9E452
-:10BEC000221AF71F126C85E87A4B2B80F791926546
-:10BED000117CAFB8862C2CA2F1895C1F5F21F00881
-:10BEE000B32C813C9C72EFD413FE44C443FC8D966A
-:10BEF0004CB4409054E1F95D2ED6C787DECC94490E
-:10BF000096A0C042FA640DAA37D227C31ECC7A7419
-:10BF10001F8D3F60853C2C962EF09CCDC5FAF767AF
-:10BF20005940C2F6CE8AAA84A218FC259D97402DBE
-:10BF30008DD6DBB3548623490903C971D27985DBD9
-:10BF4000A129DF42FA465F276981FAD6DA9875405F
-:10BF5000F1AC22B8375CDDAD92BE4A3A22F6091048
-:10BF6000CEF0E2D6FE86765125422AE18C8589FD07
-:10BF7000E9F0B7EDE5292AD231ADD29DE2A6F2670C
-:10BF800088E4498C673FA9BFEFD39F2BA8F6686868
-:10BF90001AB66F271D28DA83807CBCC1A6B5930A28
-:10BFA000C17A9AA4B5FB1FF54E233ACAC6FE25D91D
-:10BFB0007DFD3D8E8CE8FC53363F1A6A2BEC8FD703
-:10BFC000BD53ED6C87E3910FECD877CD5585C360F9
-:10BFD000003B11C56BC225F09A24F07A01B53DAE45
-:10BFE000739743ACF39EA48E22FE7AD882529F03AD
-:10BFF000F092CB579D554EF0078BE8FB9224CFB0C3
-:10C00000A9C86F9D36CFA8EF901EE98A736FC171E2
-:10C01000B5777EF85813C9F1ECBF15A007039D8AC8
-:10C0200027611CAED3E0FA94E5BF462E4C26FFA64E
-:10C030000F8FC4BFB8E6F72DD13AE983A4285E3D3F
-:10C04000B9D8BE2106CF0E07E92B51FFF7AC67BC6C
-:10C050006D44DFDB1C8CA7B59A0CB5A5C0460BF26E
-:10C06000FF59D7B6AF133F9CDD6E05F2933AA99105
-:10C07000EC638183E508D2C319B5C8F7456F58BC96
-:10C08000E48775237F78883F1AF30DF39D9DF25660
-:10C090006A118E3B9BAEA4127E56866D8CB7850AC4
-:10C0A00004EDA81F3BD36FABAEC4F6CE232AB777FF
-:10C0B00068F33C9BE7599EC576659AEB7DDC97E477
-:10C0C00099245F1C3338BDC862BEAFEB43C4730311
-:10C0D0006D3375703E68AB7404C8AF6CA8682924D2
-:10C0E0007BB026257F18E03E1AA6496C5F1B9A3E5E
-:10C0F00066BCEBF32BE76550D3A275778ECA7650FA
-:10C10000513CCC0FCA791BB7D7359D65BD8DE06416
-:10C1100091DCF4B408FDB6D10AB7D66259F74FF9ED
-:10C12000D65AEC5F872CC5F601F6D9D6C4E83FE8AD
-:10C13000F8A84FCF9720ED1E9EF5663CE9D55AC969
-:10C14000350F700F87B36DB5CA70ACC7B9E64958E3
-:10C150000F6CE9F5723DD335CF82F58EACDA5A65B6
-:10C1600022D687BB7E687103FC69CB4AD13FCB7571
-:10C1700098EA07B31E10ED89820F7E98755BADBFFC
-:10C1800090F8CBC97839D39EC0F231189E9735BD4F
-:10C1900068C04BBF7659BAD54B7C355FE8C153EBCD
-:10C1A000476C66FF2737944F6B6E273D8B781B8A51
-:10C1B000B4A9C07FAFA0DC3B100FE939E0B160FF4C
-:10C1C000F45FA0FDA1FEEF854611FE96FD222E280C
-:10C1D000213D563FF1928DECCF1259CD27B9FAF59A
-:10C1E00068DF7F935C9D4E0C717D59D31E86EB1FDB
-:10C1F000B92EE19FB822855EE4CFE5B0D146EDCB04
-:10C2000041394E7602B528FB312B9D2FDBC80F5BE1
-:10C21000F9B4F57838C68EAE82F03192D3BA67ADF4
-:10C22000C7C331F616687C0C7F1DB70838140D1F84
-:10C230004BE4D0229B806B2FC1B53A15FD7999CC88
-:10C240004368A88FFDA0BA028E4332E281F86EDD0A
-:10C25000156F17FB06B07B1DCD68E751E47634EF10
-:10C26000E2B21DE724BD334C09DBDC384FBDA69795
-:10C27000C7878EDB2066FC31CD7E25EF92B85DD777
-:10C2800017D176619FA0D033D68270AC9EF3EA14AA
-:10C29000A28B4ECF6B13A0232E95E9E2D6E8E226BF
-:10C2A000BAE8F8477C962A38EEE50B382E6B20BEAC
-:10C2B000D0F12FE0ED8C17FA22B2338EFD2433FC3F
-:10C2C000E7343ED0F791902DEA83C19F909D28E8F6
-:10C2D000FA2F863F215BC8B1791FBA1CF7C57D2DA7
-:10C2E00003FB293ADC97CF6721DB17E1335DCFD41D
-:10C2F00083AF80E6D7F58A8E671D4E1D5F9D14FFC4
-:10C300000C00A7D2F44BC37E945015050D50909DA0
-:10C310002DF458C74C203A284DBBB9DFE5EE47D77E
-:10C32000B783ED4BD7B3E6FDE9FA56DFA7AE77F555
-:10C33000FD4E4545C2FA10C3768AABAE3DEF33F8E9
-:10C34000BD95B0C2E017573BEE34D46B5CDF31F4DF
-:10C35000FF5A468BA17DA6BADED07E7DC10F0CF5BB
-:10C360001BDC3F36F9ED9B4D7EFB7F1ADAA7844339
-:10C37000EC67BFD63C031474ACAEF920C2FE76B0B5
-:10C38000D9C5F57DCD195CBEDCACB27CEF6F2EE07B
-:10C39000F240B39BBFFFB6B982CB579B3D5C869AF8
-:10C3A000BD5C9AF5C2ECE7BFA1507C5211DA584D42
-:10C3B000AA7C5B8EEFEE6CE487D72D81D644C4D384
-:10C3C000846EE18FC372B33D3E77EC1EB2EB2E9BC1
-:10C3D0009BEC61DBDE89923A803F9784F6CE13C3F3
-:10C3E0002F49B3C2E021BF07CDF340FC756FB6857E
-:10C3F000E9476A1F50EEE63BC09A8EF2367FBEE4F4
-:10C400006E15E6C00FA95C067DD83E5B013FD9FFE3
-:10C410005AA712B42731685E07C2394F8009766A7D
-:10C4200027FB9D9EA690DF7A137D4478658F0CD7FD
-:10C43000E0F77915BFFB8CE2E46F3A3BACC42737D9
-:10C440001FB8EFD43DD80E6DFE72928F3EBFC1FF74
-:10C45000B6E572FC867BB3855CF54AEE9087FC9D61
-:10C4600014C51DEBFFEBA5375BF8FFB35BFD721244
-:10C47000E233F206B01FA7CB23EEAF9DE0D7E5A2D3
-:10C48000D6A504472791BDFF4135F5AF3BA4325EE9
-:10C4900074B9D0E5408FFB7439A8919F6DA5FE67F4
-:10C4A0008E00C7CF137A7C1F3C4FFB34F99D15914A
-:10C4B0008DD514875D2A4E9C74BEE325EAB7A7D9B3
-:10C4C000C77CB4BB793E97C1E6E51A7F3672FDE5BD
-:10C4D000E626AEEF6FF67379A0B95DE3CF8DDCFE93
-:10C4E0006AF3635C7FAD39A0F1E976FEEECE11F61A
-:10C4F000F7E350F530E2BFA7B245DE061C951C47B6
-:10C500008022CA2FCA2775192F0A7FCAC41F66BE88
-:10C51000D0F901506F4888AF6FA29D25FB700BF8D2
-:10C520008B1663397FD946EB64E9CBF3C54A671BA9
-:10C53000FB1F667DB80282ACEFFAEB77E1FF5F4A42
-:10C54000BFCB189F92BDD2F5DF6A08F37C76F94E17
-:10C5500037E54FBE3ABBE2D2EC0A2CA6FE7D7176DF
-:10C560007CF722D972E9383B7BA418AFC7D9E83FE2
-:10C5700002D9E5DE80CC7EF5F2AC8D491C675744CC
-:10C5800092C80F58D125333D30CE548623DD9669AD
-:10C5900074EB81E01F892ECBA62CE33CDCF24DC668
-:10C5A000FDAC74DE941C5407F4D306DC673D3CF804
-:10C5B00011E5E3EA357CF17784A7A9FBE6992FC75B
-:10C5C000F4FB243B319DF355136002E103E177074F
-:10C5D00049CE0EC92C6783F1C5698C4F88CFCF3502
-:10C5E000CF9FF932F2FDE90BCD1C7FFD33FB811F9C
-:10C5F000F8477E75F45A97E74DC8E1BC5BD846F220
-:10C60000A3D36F1DE948847B5D95234081766FB984
-:10C610004BA1F57B258F4C7987DE77C1DD82F8ABA6
-:10C62000DCFD9B23241F950E279F1BE0267A62E9E1
-:10C6300039F190AFD589FD26BCEA91C97D2F7F39AC
-:10C64000DC4ADD747BA3DB9FC93D11D9C779815CCE
-:10C650009623C0D8E262CE17972373BCD94AF1263D
-:10C660002AA4B3CEE90CEFD920B8E97B348F25F2A8
-:10C670004B932F78E424846F9D161F4E7CCFCB7094
-:10C68000781C2AEB17BB164FDA332CF82D8A479704
-:10C69000CDB79DF29DF0AB38CEEB9AE19B9023F4A1
-:10C6A0007872AA7702E3D7A9E653DC5023F76C7BB4
-:10C6B0009CF8A133C14D791BB3BED5F5DB607E7B01
-:10C6C00083EBEC807EA45E3658C439C1B86AB59459
-:10C6D000E23FF22F292ED4E34473FF9ABCAAEB0861
-:10C6E000BE1A794AC84370B92C9FCBA70D4D1F7D48
-:10C6F0006E9CA6AFDFD055EE5A12930769CF91B466
-:10C70000FCAEE27ADF11A5DB17A5EFD4C87C83FD70
-:10C71000F9BFEEAFCD46374742192A9202C28F00C9
-:10C72000E14F2C8010978B20C2A50F3989CA25E0D4
-:10C73000E6F236F07219CEF535E790BF608D0C2524
-:10C74000393EF5C2DF0B892F4E5D33D995A546EDF5
-:10C75000AB6E6F2FD7AEC6D379D200FCF090C6B7C0
-:10C76000BADE1E943E26BDDD3B16F5834C79A1C88A
-:10C77000A21729DFBBC7EEDA1AA31FC06FF4170791
-:10C78000D317358A88DBB75BDCAF531ED1FF5A1A4B
-:10C790000C245F7A399BFC49E4C7E40561251BF949
-:10C7A0002D3FD5F334F1B3FF812929AC87498F5C44
-:10C7B000897478579CB7C00A299087FBDAD529EA93
-:10C7C00045B7A70424B6E741A6C742085B691FB76F
-:10C7D00002B0FE5C0C2A974BC1C374C199138A51F5
-:10C7E0009FDCDEA98CDB807095A446B249CE8A26F8
-:10C7F0001E4D9570FD62F2639D9C6369277F4387A0
-:10C80000F3448EF0632FE67876115D4B52431B1E86
-:10C8100026FF6EA705C8BF3B31F13B77408C7D1CDE
-:10C820009157D545FB784E12E77CFE2EBBC88F4151
-:10C8300064A837C6AF0EE756BF44F3FD568BE7A199
-:10C840007B3D9FFFD4BA044E61DA10C6018E1B45B2
-:10C85000FAA7BF9CF9795C09E97B91EFF34305AF37
-:10C86000CBF577724ED4B689FDF8C9AF1A91E73B84
-:10C87000447095D850A511FC4FD8035BD8FF691CB4
-:10C88000457988654FDA2D648F8FA23EA5F3CE7768
-:10C890009A1D5CFE09E3142AFF8C710A95EF629CD5
-:10C8A00042E55F304EA1F2F6F3635129231D723D3C
-:10C8B0007F617D39C83E06D7177ECDBF86F9039DBF
-:10C8C000D3756B7C5DDCF9DE7D09C407BB64771E24
-:10C8D0008250B453E17CC2E9DD130272562C5E7DB6
-:10C8E0001182A378D71F1E9A5C46E3149784FD4FEC
-:10C8F000EF3A3B94E31F137C7DF8E8B2097C68F0C3
-:10C900003E9712DA40E39FDB994D10A23E00C187AB
-:10C9100044CF01F261002DCC27CFE708FFF6467B1C
-:10C92000A42CF65C12C8F453DE51B31735F285A47B
-:10C9300070A1967F9D487C9DFB3AADE73F20431E4A
-:10C94000F3A731BF50902BF0A097455D362FE545FA
-:10C950009EEBFAE39CEB110FB327CD2C9763E42DEC
-:10C96000237788E837F1B39F3C9CCEFD5DB4D4CDEE
-:10C97000B0B9C685FD6E71EC7D8550B0D0F56E4DB9
-:10C980000AD66FCD90F653B958CD9A9EAA12B80127
-:10C99000DECFD282CAFDC462B3DCB536B2AF952415
-:10C9A0005431FAB3DA914027A07DF51A579AA1FEC7
-:10C9B000B58C1186FE33D51C43FBF505630CEDFAEF
-:10C9C000BAB3DCA5867E24AFE4FFE23E98EEB05514
-:10C9D000E6F394A29D1FBFBD8AF77F7319EDBF17C1
-:10C9E000F1674307E1838AF53F7A98D4C6CE7D4943
-:10C9F0007CBE6AF233EBBA9EDAEF5107F7333F8120
-:10CA0000DD03FA67F583F8675FD4CF44FDF110E9E1
-:10CA10008F92176EE2F3F2E7267E76854AFE722E3B
-:10CA2000FA9F884AB3FFD9ABF99F66FEE9E3534901
-:10CA3000157C7350667DABFBA166FE01B84FB3E376
-:10CA4000A2BC5C399FFDA6B03B7F25794F8BE56B7F
-:10CA5000AD34E5154A6C680728DFF77B19B6D08737
-:10CA60000B08878EFF9C28DFC36D9B5F195EC6DFB6
-:10CA7000FD89B864BD966768CED5FC8EBABDAF0C93
-:10CA80004F8FB6C35DEF1AFAC3BDD27E43BD2DCB27
-:10CA9000587FB0727FECF8C1F4D0B24D77DA7C9455
-:10CAA0005F7E44E41BCDED3A3C35FBE23CA42F9580
-:10CAB000DD768E6BEA5D1ECE832883E44174BD7003
-:10CAC000B30C8D03E9B70DDABCB3F6C581FC25E6DE
-:10CAD0003D8ABC42F0F87F21ECCCD1640F7863D65C
-:10CAE000F961AEC8039F4AD9F86F9F62BF53BF0474
-:10CAF00037A1FE548AD0B7C59D272C16B213F182F8
-:10CB00005F8A5D614B2ADD53599EE0A773E086156D
-:10CB1000897E3AFF29C98EFCD181A47F2277EE431A
-:10CB20000EE4BBB72D1683DDE9255D87F56D4FCF8C
-:10CB30009943E76DD7EF8B0B5ABEC47EB6511E9357
-:10CB4000EC549590F745C437FAF916CA47C3FD600F
-:10CB500038EFA2FD53FD58EED7DF7C84CE6B0E0A72
-:10CB6000F9C766A739AEBC2526AE844D427E1DF8B6
-:10CB70004BFECBCA9737DA28DEF9AAE47E6FAE33D4
-:10CB80001A5F8EEE2FCFBABC371C16F27E66F727DF
-:10CB90006F925E3F83F62E56DE757CE972DEF0986A
-:10CBA000CCF2A87F3FBD5B9E111800BFCF6A7C000E
-:10CBB000AE7CC3F9D79AA9E7E6905D5BD3A5F0B93F
-:10CBC000DE60F6BAA1DD78DEF5DC1EFB72711E2C8C
-:10CBD000F6D1ABDBD3AE4F522B0B45D9C2E7AE1B20
-:10CBE00035BD23FC18B4A3D674B2A3B512E7D10E99
-:10CBF000770DE37B15872508AAE3788A9B1C48B745
-:10CC0000B9623AFAEE247F0C320A145A678E46CF84
-:10CC1000B95A7E675ED7BC3CA2D71F3B971CF66013
-:10CC2000D327B939BCCF6F809FFDC1C329DE4CBA71
-:10CC30005F30BB55F0F7E194480FE5830E4F4D9000
-:10CC4000E85C09E76F8BF5F70E5BBD998DBC2FFD96
-:10CC50009CF16AF962C265C4B39A3E447AFA25111E
-:10CC60009731FF2BC31F64BE5A0181FD1E5CB7DEE6
-:10CC70001D64BF741588F8DCEC97D74FF9D0467661
-:10CC8000C11C4756EEDA7B84CE2FFAE5134CFC7AB2
-:10CC9000A9FC81397E1DCCAFCF4FF566E4C5E4EF2A
-:10CCA000CCFE799F1FAAFB515B13F87CE7A5A98FE7
-:10CCB0009E5E85F5BBB626B8285E3EF9A4DD4F7AA8
-:10CCC000F9E4167B40C2F693A9916E8A134EEE28C2
-:10CCD00072E30CB0CCA2FED7B364D79FB1325FE051
-:10CCE000CA86FB096BA6DECDF7F6D66C4D94E8FE3E
-:10CCF0000C6488763D76937F9AC87EC18AE787F375
-:10CD000079A56E5F483EE87CF98327E23CE4E49F26
-:10CD10003C303799F2763D969FF3B93CC8F71EA395
-:10CD200073F755DB12C7F1FD8B4260BA2DDF721528
-:10CD30009F536E547C9368FFD53FBD6118DD075B40
-:10CD4000F1872140FBE9DDFD3C9FE345FDF481FDDA
-:10CD5000BB33BB7392A1308A273D9FD7FE748B975C
-:10CD6000E85E2EA9E2BC051A3D23882F76D502CDB8
-:10CD70003B4E16F73D23EB13D82F35F35D6D9EF038
-:10CD800003EBF4BC411A3832487E7CC078E85D3F42
-:10CD9000660B9D6BADC84BD5EC74247F4ECC7DC229
-:10CDA0001AB9BB9EE2BD339BEC9CCFE8891BF83CD3
-:10CDB0006B615E0AC3B7CC613CFFAE6FFACC582FF3
-:10CDC000040FE99D71AD6AE99D58AED5F0DF92E997
-:10CDD000F5E5E17A2B3B7EF0C2AB8C974DDF7E9B75
-:10CDE000D63DE01479945705FECCFEFF3287C85734
-:10CDF000006C6678F5EF279E788BCF494FEC1C933B
-:10CE00002FCE7F43EF3F9EC5E7BEC7EEC172C781FD
-:10CE100037992E6678FB9DDF4912EFB78EF6914663
-:10CE2000E7B4DE6FE7F1FD1D11B72DD950C4F8D37B
-:10CE3000CFD17A4F0E1C9FE870EAF3EBF0E9F3EBE9
-:10CE4000FD5A357A5DA7C507A76CA1D37C1EFEC22B
-:10CE50001889F2747DDF5343C52931FCF255E5C5CD
-:10CE6000BFA9E5358E585ABE65A3FB6D1D0F5B7DCE
-:10CE7000B17AEF32F3E17D7EA00754D750614AD8F2
-:10CE80006EE1E694A1746EA7D54918B03E45034FF4
-:10CE90002278E8BE9F56C24A5F06E7BB693E99AE5C
-:10CEA0000F06B8DE5AE956A9BC56F22AE2BE5680F1
-:10CEB000F9723A348EA47D581C613EDFD2EFABCCC0
-:10CEC0004B59774316AED73604D6911FD3661572E9
-:10CED000E15F9CC0F19B8E27DDCE80ABD0605FDA36
-:10CEE0005CA02A38CF7C05DAADA9A2DF9588E7C31C
-:10CEF0000796BC427EC25B4AE3105AF7A8F3912220
-:10CF0000C942FE5D209162C4B7DF7CA6FCF7D8F76A
-:10CF10001DF04C7522FFDCF41B07EB7D733EE276BF
-:10CF2000F0717D1984AD1FE3B83F4FFC9FADFB202E
-:10CF3000BAAF3F4FFA7427C507B7A4DC574EE3F5E5
-:10CF4000FB93E67B7A275D4EBECF67BEAF7723F8B3
-:10CF500042C4CFE72CBE7A91FF689C40F6B737C534
-:10CF60000612F6EF1DA2E1E314303E7AADDAF88F37
-:10CF700054AE97558FE3BC229C53591F4F36D99B13
-:10CF8000B2311611875D14FDA7461483BD292BD13C
-:10CF9000F2367F57D92FBDF6BCF2B9F6A82E5FE462
-:10CFA00059CAD22C8D03F98756ADBD1582B2D88FE0
-:10CFB000F01326F7F1954726FAD56BF57AB267C8D4
-:10CFC0004FBD490E3F5D509CBC5BF0D76425B897C0
-:10CFD0004AD4AED0447EC52EB4773A1C74D697316D
-:10CFE00086F96092CE9F38D702ECB74E6AE4B8C596
-:10CFF00041FE0C961BA410C3710D44B8F46876BCB6
-:10D000000ADC5C4E032F97C89F5CCE404B42E5750F
-:10D01000D0C1E52C0809BB7F75B095ED19DCEBE2BA
-:10D02000F86FE6320BF91B65DF18385E187D493C56
-:10D03000A0C08DBF7C3C4C0794BB9C01F031B280FA
-:10D04000F587191F66F99C0A6199E59314430EE56B
-:10D05000095496D36AF070BDE60BE2A122EC533876
-:10D060004F63C647F5C07CE1D6F0F1E77C10E71FBF
-:10D070001A9D96E6AB5CD7E985729541FC6FA6A335
-:10D08000FEBD2CA1EA2C5D29BF7E5BE65CBA1F5574
-:10D09000565AB59654F282FCA2B9743FAA6C72D566
-:10D0A000F37474B9685BB1A89754955ADD68DF5A78
-:10D0B0004AE64EC3FE3EED3E31CC17FEF55D9ADFEB
-:10D0C000E26BF996DB8572E2CB74BA697F0E74EE7F
-:10D0D000E95E8A9C23CEF946CD08EEB362BFA38AEF
-:10D0E0006F7A3E9DF73982492AE2FDAE961ABE7FDD
-:10D0F000F6804DF4B7DB457E55DF177EF7C7617DBF
-:10D10000C78E316BA5ECC1D7C779E7E60F2138F29E
-:10D11000FC24AFBE9D925B50B26AD87C94CF9E90A7
-:10D1200015281FAAAF939EE99B4F7080239FF3643D
-:10D1300023347FA667C798314497A5F9DA7DAAF40E
-:10D14000AC52C25B43A67729CDDF9B28F86B29D16F
-:10D1500061C8E0E5F7F23D8B697EF3F7DEBF2200A0
-:10D1600038FEAE7CDF329AAF21E102DBF7D363FFFA
-:10D17000B02E9C15E5530989B400F7DDEA81808D56
-:10D18000ED8076CF5C3B77EABD1DE7413C94797D2D
-:10D19000ADA4D2262C888C27FD89F3AEA1751B6C1B
-:10D1A000E1516371DC23738FD9049F8D147CA6E950
-:10D1B000A1AE3D07EF1921AA5E8891AB863D9F7D08
-:10D1C000FA0EE2AFE18CD34DDDA3F2F4E3B51C4FD0
-:10D1D00082D3A03774399BB4CBCE7EF5E4DD57DD26
-:10D1E0004EFDA6FEA13B87F6756D7798CFB37ABB4F
-:10D1F000DE1A21E0D0E38D73D297B1BB74DECA7121
-:10D20000DC4E71DEBA466A7C2991EA3F93DC7E846B
-:10D21000FF846637F4B878B9B6AFD507B7AEA3BC0C
-:10D22000C8F24D4B67F17D9C80881B54FC25F9FFAB
-:10D23000045EE573EE55DBCDF144C446F45FDD6179
-:10D24000BAD743F130DD5F88D5EF03C4C34FE56B38
-:10D25000F9AE4CC8E47DC80B927D03E83B73BCFB80
-:10D2600018789EC9677FD62BD3FAE5CAC0F9842700
-:10D27000A2EF3B581E96696B139E9C1CEFDAC4BD4F
-:10D28000DF27D6BA5D54D7E47333F24A05F9D16D7E
-:10D290003F66FED7C7E9F2BAA25DDCAF864D69CC26
-:10D2A0007325DBEC1EA26BC9B6611C5F601CC47EDB
-:10D2B000DFE66DF676AAB7DE1FEF974B289F1CB905
-:10D2C00082F22AAD71E27D129947BAEF59922DF29E
-:10D2D0001CC774BDAED975FDDE6C5FFC9398CFF7AB
-:10D2E00093FBDAC38A21DE68D5FCE732828FFCC06B
-:10D2F00046AB889FE204FC7BDFF87A02F9B13B156C
-:10D300006F02E5A5CF1CCA4E8601F0A697E5685EC0
-:10D31000E073CE0BCBDF9A95F379F42A7B4CBB6795
-:10D32000AEF1E7AF9A3DF0176B941EFABE6AE46760
-:10D33000AB6D94E7B80D5C94F75873F0A9567A2753
-:10D34000B3663D7046E10CFDA178E1030B9F674F8A
-:10D350003A589A41FCD8A9E93B3ADF5563F86A3C50
-:10D360002585B07FF94808D0BBA138351ED498B8C0
-:10D3700038A120D5504F745F61189F5C916D68078C
-:10D38000BF2754383EEABFA678AE36F47F20693A0C
-:10D39000BFA3991ABA83F34A6933C619DAEDC8D71D
-:10D3A000745F013E16FE4F05FEB25D854699E09C16
-:10D3B0001C06F809F2DDA41EA37F5411DEC87160BB
-:10D3C000DC21C510D7DB2F91674A1AADC9D54818A3
-:10D3D00029F48319DFC67B0D6B0ECAECC7ADC944B7
-:10D3E000C7336B707CEBF2A7E37D88D788F761F3D6
-:10D3F0008D781EEE33E279C472239E331B8D78BE86
-:10D40000B2C988D72CBF118F39ED930CFDF3365676
-:10D4100019EAA31FBBCED0FFAAC01C437DCCF66F78
-:10D420001AFA17752C31B497EC5AF9B9741F1B5CB2
-:10D43000636837D3BDF4C0774D7CA8309ECBB577F9
-:10D44000553AFDFDF84BF49F0CDEE4A044E9407F23
-:10D450002BC9E3BF8AFEB3476BF75874FA7F41BD0F
-:10D460005AA8F94FE6F759B31384BE79EDC0994332
-:10D470001EACBFAE965A33C86FD2FC03AF7E1E619E
-:10D480008AFBF438E5C60AC974DE1E67386FBFD45C
-:10D49000FDB4F250D0501F7B48BC6B1A77C4FD120C
-:10D4A00095E5EF79E4D8774C133F66B3DC2FEED4E3
-:10D4B000EFB9E97113643CC971E8021D7E1282F173
-:10D4C000FDF38B7A7C6A8E5BF578B5FF3B29E1979B
-:10D4D000DC2D0F16C78AF8558F5BBF0E1E7E0F56C8
-:10D4E0003ED2B76E34DD9FB244D2A85D8F6709B1DA
-:10D4F000746EDC4B8865E7E2E05C4F21BF23E5BC3E
-:10D50000F7CA9657E6D27D7D04DF151E2FD23FF471
-:10D51000F3E468DFC6D1A8778F4BAE75A538F6B5B2
-:10D52000491F8EA2F91E1E2DF20C76193184F66762
-:10D53000D8020FD0F7FC54CF23A387F4BF676D2E1A
-:10D54000CDF77F3A9B835C2A2E37DFBF31E707C3D5
-:10D550001695FD4EFF7725BE6FF321013731EAAFF7
-:10D560009C69B7B2BF025A3CBE50C3BF9EB758A019
-:10D57000EDE7384EB11CEDEFC25DBF61BAACCAE851
-:10D58000D1F21D8DEC5F2F1DE91CC7F7C93CA56EBC
-:10D5900091E7D2F318232EEB9DC8A5F6BF2AE3A48A
-:10D5A000218F04CFA67DA1F3EDE8BEC5FCC7D78BC4
-:10D5B0007CE4F1F5999CFF8ECE7F9AF3490B1BDF3B
-:10D5C00030C8C5AD4D470D72B0D8FFAEA13D9C1E11
-:10D5D000B152FE30FCC2F0E9B720FE4EEDB4F33B91
-:10D5E00066E4833746C7E4CFC2EBC74CE3F79097B6
-:10D5F000DCE7870C47777388E9ABEFF358F311AE9C
-:10D60000879BC35C9AF7A9E729F4D2B60F0AE89E74
-:10D610007D448A77535ED89CBFB8DBA2BECFF72289
-:10D620000BB2B57382C6122FD34FE42BBAB577A1D4
-:10D63000DDDABBD06EED9D67B7F6AEB35B7BBFD9CD
-:10D640006B75B6535EA35B12F77716489E2717E3F8
-:10D650007AC9237D1F915C35AC8C142BB84E43499D
-:10D66000789184741E39C4F731E145C2706138BFC6
-:10D670000BF2F33DAF0F2CFE627A47E32EC8B88958
-:10D68000E2BC0FE2FDA7C91329D89E26EA362187FE
-:10D690001505FF60B97B0F27A3FDF97F2989BC928F
-:10D6A000336CA3775053D37D503044DCDFE2F72F47
-:10D6B000F89DF852CF73F65A851FD8ABF983F6025E
-:10D6C000710EE83095D944F3725A0F343FFFC17C94
-:10D6D0007E37B2C90EE4BFE2FAFC4E46BF67627EF7
-:10D6E0004733EED7767EEFA0E743471464F17CF42E
-:10D6F000BE86E432FD7B09ACB7201C1A45EF71FAF7
-:10D70000E03D24DE439EA23C724CFE794481F6CE7D
-:10D71000F13630BCE7597DF0F8318AB37E3DDA77D7
-:10D720006501CEBFC4A28E27BAAE4EDACBF9AEB138
-:10D73000052AAF8BF08AFDCAD046745AED08737E75
-:10D74000EC52F9F0C1F67FEAF6D08F0A39FFAB163A
-:10D75000F37B3A6D5D84636C414CDE5A87233ACF8C
-:10D76000E7F3BF9ED7D5EB279E78205FCBCBDFEAD0
-:10D770001DC09ECED0F0D26D1D388FBEB440C423E4
-:10D78000FDE8331A4D11DD538C471B81E53CC21374
-:10D79000E5816FC6FD707EC23396E8BB7A8E93DF5B
-:10D7A0008DEBF3E33CBE9F7FCE3A2D99DE1B89FFC4
-:10D7B00056368ABCBBDEDE2B09BAFAD78B3CE8EAC8
-:10D7C0003D478FD1FFBF60C54F8B4A39BED7C69B3F
-:10D7D000F18CF8E5F74D4B64716E85F85D40F39B75
-:10D7E000F3ED5F16AFBD99E27CB577F367A3E8DD93
-:10D7F000E86ABA7F46EFBCB4FC15741AF352882F5E
-:10D800003FE52BFA9F47019F6BD9353B62D7C78F06
-:10D81000540CE3BB9DDEB5C41F2F687A03FB072CB5
-:10D82000B87EA71E279BF2289D2191EFECCCB0B1CA
-:10D830009F4CFE0ED927DDDFB9EB0D91EFBC2B4BD2
-:10D84000F8D1041FD1573AB29FFD843EFB2FB95542
-:10D85000C29FDDEABB9FD607DF5AB65FF295485FED
-:10D860003ABFF8ED755A3E40D8C372CDFE95D33C11
-:10D87000E4E01426B35D2CD3D645FF91F36E13C1BB
-:10D88000D72A80D1F266EBF7731EE17F01BC43AE6D
-:10D89000E0704400000000000000000000000000F4
-:10D8A0001F8B080000000000000BFB51CFC0F003ED
-:10D8B0000917B0A1F2AFA1F1933951F93F5951F9CC
-:10D8C00017D0F884B02E1303C30A46D2F420E39D88
-:10D8D00040FD0780F838109F6322DF1C103E28CCE3
-:10D8E000C0F0458C816116906E01D26781F82B10D3
-:10D8F000DF06F245441818948178BE28034314903B
-:10D900005E0AC40522107D8780748D287976AAF37B
-:10D9100050E6E6514C195E298DCA2F55616058A614
-:10D92000CAC0F05A0DC25F8824CFA0CEC050A60254
-:10D9300061EBC931307400D5CC94C66EAE3E50BE9A
-:10D9400013282FA00EE10300D191FB3B68030000D8
-:10D9500000000000000000001F8B08000000000015
-:10D96000000BCD7D0B7855D595F03A8FFB7EE424E6
-:10D97000B9819B90C049081834E0490C0F11F12679
-:10D98000441A6CC41B8C1A6768BD606B231588C869
-:10D99000687C4C7381248497066D2D83FEF462AD00
-:10D9A0004329ADD16287A98FB9202D689D1A2D56C4
-:10D9B000ED4FFF46C6B1D42A7F44F1552CB3D7DAD8
-:10D9C000FB24E79CDC04D0CE7C838FC33E673FD62C
-:10D9D0005E7BBDF7DAFBBAA104E0128053F8873D05
-:10D9E0006F9000206FF0095EA3092200CD9A5B5F63
-:10D9F0005F0CF04DC538A857B1F7A365E3073ABEF1
-:10DA00009F580B610005EBE70318F83FD66E4D7089
-:10DA1000F5A84490BD531666E1D3ECDF7C36AB002D
-:10DA20005A257EDF3831D377F30929577F9F17E8CE
-:10DA3000CF29066AEBE1D727EF37CBECBF020845C9
-:10DA4000DE0AB0BF4C87E9A71480E3C10559691805
-:10DA5000BEBFB7DBBACF5327007CD4F6DAE4FD13A0
-:10DA6000867EFFA6022D3DE543DF4F0736E854C40E
-:10DA700047D21D9F3C38EF81790619922E64ED0143
-:10DA8000D29E1CF6DCB1F93CB56C104EE73C00921E
-:10DA90001CBF9FB39D2752932E60A50A29318BE0AE
-:10DAA00052D93FD300A82A5B97253B1A80E072C069
-:10DAB000DB11F9DBC03BEC7A897AC783AB3B91B4CD
-:10DAC000D6B838BDB4E7C9C66A184A2FE67A98783E
-:10DAD0003CD3F5B81D7C348E4947CDF2C211D7FD39
-:10DAE0007474743DD2D179FFFD7494FCDF4B471DF3
-:10DAF000D4CFFF323A02E8E6F8823E15C71F7CCF4A
-:10DB00009F91853D12D2192BF622DC457C28286A8C
-:10DB1000EDBC599EC2C41418CF9DC3E45651DFA278
-:10DB20007A847BF4E1797FC26767634DDDA56C7E03
-:10DB3000F94D3D2F7D893D23F1949460EB751FC80D
-:10DB40002854587F3725ABD9FCDAB1B399008F241C
-:10DB500017C592385F88018C02F8073127005957A2
-:10DB60005939447FCD340F37A4393EA4539EA1EDDB
-:10DB7000879B7F08DB99758AF1FF2B00E777BA76E0
-:10DB8000B0928F9764FF20BEC70C8E4FFDE4375BC9
-:10DB9000CA80F8B17FEFC5BF107E6FFE1F19AF00BE
-:10DBA0002A7D281F42F5B296C2FAD093ADB272E434
-:10DBB0002615D24C461454754B2EFDF4EBD2095069
-:10DBC000D7C3D7476A080DC2F79F2011FD8CBDE36C
-:10DBD000CDED6B19C99D581834883E3480DC9CA16A
-:10DBE000F3F94E1B12B2A5DC582325683CE3B95269
-:10DBF000D63ED9C8F5DE7DF50BB2ADF2CA23490297
-:10DC00006F4EFA005D9D866CC5E943AD9763BE29F2
-:10DC10005F9C3ED4CF491F792B2DEDE0ECD72B62D2
-:10DC2000DA0567481F5F743C735D87F2D52AB1AE91
-:10DC3000A53E607C7B6FDD828C76C6F0EB5A49FC9A
-:10DC40001EA987582A43BBFC81F54C0E7DB2F551C5
-:10DC50000696F716DB7A29A3A7356D1F011F4AC464
-:10DC60003E5FB35F5FABA2BF99CB8AAA26637F6E8C
-:10DC7000EC8FD1D9BAE8BD4960FC7002699BE143E1
-:10DC8000E9AE4863194AC1F881804066655F349601
-:10DC90005A4F7490A27531E1F3E8B20DFF6AC46F78
-:10DCA0002B435352B2C2EF6B75131C6E1C8FD1BB4A
-:10DCB000A2B10E192AD420A47D61ACC1E14732384B
-:10DCC000351ECB77DAE8A04BAF844CEB60D22BA2A9
-:10DCD00095D3EB9D67265F9CE335DAE13DE3764122
-:10DCE000557FCBA287866FA7C25BE6FA30247E0DF4
-:10DCF0003B983AB84E6B5DB0473A9FE9EBC2AB2117
-:10DD0000C1DEAEC54F17129D923DB3B6B05243BAB5
-:10DD1000821D928A709A7A14A23954AF42D2A91FF6
-:10DD2000D9DB02584F09C6E8697E1F1E2E417FC904
-:10DD3000D8DE52D6EFE5627D2F177A0DAA5C6FF61A
-:10DD40009970939E5507CB6C1EEFDECEFEC7E8247C
-:10DD50005921A57E200DFD5E8F7A91C9A57A7C6F31
-:10DD6000912B5B06F8204AEB552FBE3DFBC4AB134D
-:10DD70002F60F4D16B2880626BF5139E582DEBFF5A
-:10DD8000A58BA5944712F03238E70B385F88E5166B
-:10DD9000219DF6D67A888EE77FE9A30892F1B13DFE
-:10DDA000BF5133D1CBFC59AE4138D87FCBADF363F3
-:10DDB000FFFDF3C0BA14D238265C4B2B1582A37733
-:10DDC0009694C271F6FFFE8F775FC4E07CA14A3261
-:10DDD0003C3AC11B02365E6FECFDC8887E8739BEB7
-:10DDE0000E1AE2D339BEB91EE1314078853F30BC0E
-:10DDF000B2F19235FD7D6B10CF4724630D1B2F6B65
-:10DE000076EB381CA7589609DE75B3BCB2C2E8079A
-:10DE10005E1B25233E8382CFB3DCDDDEF10CCECE4C
-:10DE200009323CC45EAD2B1D599EB53BE499AAC591
-:10DE300063126BAF27B54A6504BE48C5E4BA4CF21D
-:10DE4000EE7989EBC98EE402AD14A7B7DF6E07A2A5
-:10DE50005E8A5BF42AB3179F97D8FC5D114EC7D931
-:10DE6000B5716E27F68E22F91510EB9135654116C6
-:10DE700064B083879D071B2893DD9C2D73F8E030E9
-:10DE8000EF5F35FBCF19B9FFB5A2FF8F9B25E845A2
-:10DE9000F8D4B817D71F621544CF7E419FB03287A0
-:10DEA000CAA6DCF594C5BB8AD93A7AA232E83ACE42
-:10DEB0002F49EBBC81AD712103C55FCBBEB3AA1B5B
-:10DEC0003E53C82EC9964F24930C8E0D7B6F049D34
-:10DED000D9A9FE680AA83CF9062FE26703530A7C19
-:10DEE000FC1EC0F1038C6C51BE06987CD551BEEA75
-:10DEF0003D699995D53A3062EC534833243F2399D4
-:10DF00007DD192552A7BDFBE10887E01AD080B7E45
-:10DF1000DBA32FC71406576713905DD319A9A1F986
-:10DF2000B597D7788BD1DEA957E93D9C64F830EDE1
-:10DF300010260FFD6510C3F136E4432A88BC549BBC
-:10DF400047F4E8D6F8FCF52DA590BE807DCF9EB6AF
-:10DF500017C74FFE231813F89024D754932ED44498
-:10DF60005242FFAE5533D667A0BB2D90C892A7DAB8
-:10DF7000E894F4AE136F596EB80CF1DB59C1E8BFE9
-:10DF800078683F85C83F8CDE52C6822B4A328C535C
-:10DF90002CEB441F6659FFD84DF00F577FB01EB3CE
-:10DFA0003373B1EB98847881DA08CD2F0706FEC46D
-:10DFB000B09C2BE63B0A5AA85E7446F75EE4B38237
-:10DFC000584F35E2E23BA1AB5FA2758307358C4722
-:10DFD00030684B4FE50ECA895890CB89E3864CF2E6
-:10DFE0003124A7B518EB20E4EB8D92B2D681FC88E2
-:10DFF0002C6CC2005EDFD63D19FDCB3018127E0FAF
-:10E00000196AD22A7FB280956DF61F1C2A9D46A4FC
-:10E01000C5F902B4BDC8325A59CB39D8DF7D0C20BE
-:10E020001FF393378612A42F3EF285A7E0601FC925
-:10E03000F1AC346F5F8676F76D8ADF588FF46070CD
-:10E04000FDE065FFA0FCCB9AA1DAE47176CC5ECE50
-:10E0500075E88DB94A90E69B7D39087D10AB9F30FD
-:10E060006A103E065903D2CDE65A1570BC6090C3C3
-:10E0700065C299AB9C4CCB40701C4138187A088E15
-:10E08000701990BFC7E039E280E788039E23567875
-:10E090005ABD7CBE4EBF7FB12CFC7EE6F7A21E3C73
-:10E0A00001EFC4EA90606245A457C21AAF1BF4F6B0
-:10E0B0009251A58146EBEFF4FBD9FA1CB7E9871919
-:10E0C000A2AC33BBBE84E0B37F8742A2132A2B30BD
-:10E0D000E0BF2E9E61E247BFE6FF32BEBBF1A00B60
-:10E0E00090AF18FF2AF8DD25BEDE28FCD8C5A8FFB2
-:10E0F00099DEFE1AC4C308DFBB2093BDFC2EBC1CF6
-:10E10000BEC02217EF93DD428FB305B5F22F185131
-:10E11000F4ABD56067AF1226349874269DA2753390
-:10E1200080FCEE20A7B7247857917DD1C5F5A3E9EF
-:10E13000F77DBDDBAEAFBFB1C55EBE01168C42FA46
-:10E14000BAE1DB2E48B17E6FB4DA1F6C7DEE9035FC
-:10E1500082EF1BD0D2A905C9CE6AC2792CD6404520
-:10E160003F6DE9BFFC9F698BD87CB60A3DFA3693B8
-:10E17000EBBA456F2C89A4DCB1F2A1F35B2319F350
-:10E180002F92869FDF5A57EF7CB40F929B5CE4D7A7
-:10E1900081D35FDBAD90BF666947F05EDF659FDFCF
-:10E1A000E9E6EF9C2FF35868BE4B762C22BD39DC94
-:10E1B0007CDC3BA4582A837E7BCCD48742BE98F477
-:10E1C0006DF275B206B8BDF7FF7CA9356CBC57502F
-:10E1D0003ED2FAB79CCFE3282DD3F179BA76BFFBB4
-:10E1E0009CEDFEF039DBBD29E4B8B3DD526F9F1B17
-:10E1F000D773B99AAC93E4413BDAEB6A898D61A895
-:10E2000070EDA94EA32966A9D77586F50E4A256734
-:10E2100054AF4E1EA1BF63C2CE38B0EBFBEE3EE45E
-:10E22000BF9D6FCC47FDFECD2715F0B2791DDB15E4
-:10E230008234D2A79A72A3BDB284D1558ACAE96941
-:10E24000575AEC2A46B1D4FF371F0D917DB0E471C7
-:10E250004FAA9EB55FF2B3FF98020C0FC756F7FFA7
-:10E26000720CD2EB4E89FB7FC9BE2957B2F74B54D3
-:10E27000B82E9E814E6485F3CB3BFF1A6842BB4F9C
-:10E28000DAB1F7ABD46FCF352E94CB66BD4F6417A0
-:10E290008DCBEAC5F07BF287526A82C4E16B983C71
-:10E2A000D4EF7EE78712876F8F2BE543F8766C7784
-:10E2B0002758BDE53BDE23BA9DF3E88FC38887E589
-:10E2C0007B149BBFBB7C8792F64CA1E71BF844CD27
-:10E2D00028317E5B26F875D9EEA5A40796F56C78F3
-:10E2E0000FF975F91E974DAE33BC1869C4EBAB8AB4
-:10E2F000518FE59FFE735867A87A3BBA33AC9553AC
-:10E30000BF8BDC8CAEAE98616F87FD7F9C33B43FD2
-:10E31000807E8A6B2EEF59C7C703AE6F4C3E7D1BC4
-:10E32000FF923F546F4C52ECFB0E27E08569148737
-:10E33000DC919BD18F33F585C9AFDFFCF1896D4945
-:10E3400036EE3B8FFF795B92C17FD35FDFDF7627AD
-:10E350009B173CE3D3500E2DDFF94A182C78AF55AC
-:10E36000B81F76EC87FFFCC856C62FC75EF7905DD6
-:10E3700077ECE93F8ED5D9BC8F3DF6C928B43B5721
-:10E380003E7DE968A4AF954FCC190D23F80F48AF37
-:10E39000298F755D53B4AEFA1E098330004F89A7EB
-:10E3A000637D9EDDADA43174FBEE6B9E9487E167C7
-:10E3B000397BD75A89EBB594F41096EF62785EB644
-:10E3C0006BED7BCA944CF84E8E91A3F8646C13C528
-:10E3D000F5BEF28A8BABF0E93274A40FE827F9EFAF
-:10E3E0006CB7FC105BD7F3875FC71370D28DF85FF3
-:10E3F000BE6B1D1FD7B18EEFE25F2ECCA0FF87ACA6
-:10E40000E34DDFDB8A1F77E7D2BA0FB78E4B9FB899
-:10E410006A44FFCC9407A7C36FB3C4E13A5F89ADE8
-:10E420005090AF1EFFD1235B237C7DEB19428EFD04
-:10E43000F8C4580C2E1F75F57F15E564FFD31EED4B
-:10E4400021D666C9D3AF129F1D7BE225B74E72124B
-:10E450008212D37BC760E04F2FEAC165122F2C7F59
-:10E460003894F68407D76959AAA14E0FD3FB37E831
-:10E470007D8AD3FFB2D4DE4629C3BAED544AB85CD4
-:10E480004EE5115E96EABD6E2D685F4F6906AEE3FC
-:10E490001B7391EE865B4773FE1ACE7FBA653D1FF4
-:10E4A000E67C3B1C7F1EDBEE51A5ACC1F53D26ECA6
-:10E4B00083E529E955C8C0B700AB39BCC3EC3F9A26
-:10E4C0004F273D3CECA007B3BD39EFD3F1F5E9E7A9
-:10E4D0007376F8FAB6A2DBE8C6C4DB3B2733CBFB86
-:10E4E000B49013CB205957307EA8BE52219E1C53A6
-:10E4F0003C086F678F4272FC9D1D0AD9E94EB9B086
-:10E500006C187FFCD70AB73F96EDD93B05E5D73BA2
-:10E51000FBFE55D021A7F365BBDE702785FC4F5964
-:10E52000E53FF697613D5E13702F7F2A737FCB77AF
-:10E53000BD97B1BFB7D5D83508FFDBBD2E48B22E89
-:10E54000DEEE5132C637F6292E5B1CB73334EDB5FB
-:10E550002C8C6F86FD3ACE7BCDEAD8AB49B4435EB6
-:10E560007601D981AA71D4C3BEAF09F969DF7B4DA9
-:10E57000F806D02D7ABADD8127351A273F588DC489
-:10E58000AB78EC3565F3475D9A6C831BD46421C688
-:10E59000537E5DFC4715FB7D11EDBF7306EBBFA8F5
-:10E5A00042472EEBEFC59864AC820CF12947FFF18E
-:10E5B000590AE8563A8B95C9D6F86A78DFED149770
-:10E5C00068859634C689A0107A7E60E9F7C1360D59
-:10E5D000D26C7CA82B93ADF1554F4B4BCCC3E028AC
-:10E5E0005CA995A06936DCF8452DB23DAE2DC65F1D
-:10E5F00021E209B063E7CE9DACDF3AFC56827E0C87
-:10E600008F5731778AEC9839420EFE9BB083F749D9
-:10E61000F1FDE867C5F4CD2ACA39A974B38AF6C4F6
-:10E62000BC93DDEA620B3DCE2B5D5588F472F0336E
-:10E63000A529135D35AA9CAE5615AF2DC4F6077DEE
-:10E64000B7157227344AF32C10F3DC5FF48D601F8A
-:10E65000EB776FF137364E6470D54515C0784B5D5A
-:10E6600064D1C60A36FF82438AE163E582E6A49A52
-:10E67000983C749C6D28EF19FE1E423C32F81F6EC8
-:10E680008B52F991369D9E3BDACAE8B9B3CDA0EF23
-:10E69000BBDA6650B9A7AD8E9E8FB7C5E97DF80E7F
-:10E6A0007F02E977775B13BDFF595B829E352AE7CE
-:10E6B000B779021F9679D33E58637B7835C6514CA3
-:10E6C000FC39F15DCB282E87F60D241DF13D5AE56E
-:10E6D00072C589D7D6D620D9A5DB24B0E1739ACAF2
-:10E6E000EDC8B880E3696FE23215F7F9EB4ACBC9A0
-:10E6F000EE81B881727A9B14BFA782F1CB81A2E927
-:10E7000051ABDC0D051371D5422F63BB787C66BA23
-:10E71000CAE5531DACDA9FC5E08B9D041DE9CC9C76
-:10E72000E7BE6ABD10E5E2BE550C9E72FC2E439911
-:10E7300085CECCFE660AF82098594E0FD22DE7FF01
-:10E74000E8CCB2CD1827668EA7314127ABDBD66E59
-:10E75000B36AC6BD75A263934E18FF1C288A503752
-:10E76000DC5F6C2EE6DF7D9CCE5BFBDEA3F856748F
-:10E7700014D8E28D1DCD32F9395B0FF3B8F489E678
-:10E7800092CD1359FD6A8637F4DB73E69566252C26
-:10E7900074BD51D0D3566F3C4B1B417F758A7A664E
-:10E7A000F9902FF12D5C97EF8EFB493ED2F356572F
-:10E7B000EA5A948FAD873DFA6A36A593817812BFE5
-:10E7C000C70BD97B06D289BA951E9A5A90EF3FB4EF
-:10E7D000DEA56F3EC7C2E721C3CED7DB5A478E4BBB
-:10E7E0009B706F43B84788CB9A709BEB71A2AEB118
-:10E7F000FF1B30140FCE7E73E6358E38FE83C8774C
-:10E800001EC2C3362BBD15B668B4CF60B637E7EB72
-:10E810006CEF9CEF60BEC299EDCFF4B82017D7F330
-:10E82000B1BF8CFDE98B804B1E57508E5DA7267AB9
-:10E8300010EFD3A085CAA0F6E723BFFCD6CFF970AE
-:10E840006BE723F9C4476AAA18F5C2998ED701F17C
-:10E850007835EA2D4336ACF2DC7CFE4235E30469C0
-:10E860008A1FD116331B520EDC15CD84E781FE0BB7
-:10E87000D577ACFB491B01B89F9EF6D23E070644F4
-:10E8800034562E3E0895EB597F3B853CA956B95F1F
-:10E8900078C1417DBBC2E3474A43C88247114F3527
-:10E8A000E3581D701768ACA95BADD88BD54D3EBC45
-:10E8B000C29DF82DE2CB1DD569FFDD1549105F81A2
-:10E8C000887FCF1271FA4B95C301945FADD01B388E
-:10E8D0001FF9F99002E41727C6135F5E34CC3EE1BE
-:10E8E0002E619FEF10F2FA1141370FA3BC66CFEAF9
-:10E8F0009EDE34B2F4AC875373F0F99090DF292197
-:10E90000BFC355FEB4C4ECCEBBA71D4DB43038BA5E
-:10E910008F1E5770294D793153C067CA87993E0EB3
-:10E9200047B8BFF366B4BFB7A1FC473DE73A30FE36
-:10E930001E86AF8E84DBF0907C89D7B5E03C0A65FB
-:10E940009AC7CF0B6B641F2B3F658081FD3DD816A6
-:10E9500023389EF2F6BFFF22C6F767B98D247B1FCE
-:10E960003E79FF2DD86F58FDD13FE0135213F8FCCC
-:10E97000855C32F9ED59D70109F5F9D38540E38576
-:10E980004FEEB90DEDE7F0C9E76FC77697A4A03653
-:10E99000C0EA072B767FF97CD67FD6E532A0091A2C
-:10E9A000ECEE4F74B3FAA5AD2DD538B57F93D201F7
-:10E9B000FC9E9CA7921C1C0BB15518E7C8DB9890D5
-:10E9C000F07BE8418EB78BB6F4FEAA1A109FDA3EB0
-:10E9D0001C6FBCAB98CB5FF9B939B8F7E2297AD391
-:10E9E00087EBFAECD11580F2CAF3814CFBF14F7F33
-:10E9F000B002BE61CDAF38AA668C838D7779F8BE40
-:10EA0000D5070BBAA7E89CBC907F66FEA9D64B7CC5
-:10EA1000FE02D8F661CDFD2AB37D859418EFCAA316
-:10EA20007D09BE7F25DA5FA4A02DC78A7F96F97E77
-:10EA3000693C15B0C641827F92E399ECCC2A974A93
-:10EA4000F0B41BB5477FCDC653A75F4DFA17BAED9B
-:10EA50007038DB3138AA381C1C3E138E2246EF3E3C
-:10EA600036FE53C77F978FF07D5C67EA95DE00FA2C
-:10EA7000F97B4FC8C46F9BFA81F4CABEAA7D5EC4FD
-:10EA8000E3C6AA1A3FB773383DE6087A7CB88ED73A
-:10EA90003F51C5F7F5E1E429DAF77289EF3979FBDF
-:10EAA000BCB457918C05ABA7A17E32FF58F2081871
-:10EAB0006E8A93F63C02B935C7562E8202477E4ACB
-:10EAC000C9A05C453FBB2EF2FC38064A48EC3B57D8
-:10EAD0009BFBD8CA6103E7FF80A9FFDABCF4DCDE48
-:10EAE000F25000E31CBF30E9A4B9670ECE6FD64DDB
-:10EAF0003DCF86D97C2E3ECAF7CD9C792928F75088
-:10EB0000CE6ED4D2B9563D0AAA87E031F7372E3EF1
-:10EB10006ACF5399E5C84319928F75967EE572972F
-:10EB20003DBFF0046C9C4474D15B625B9FED173277
-:10EB300037E6FCA1FEE540BFC27F8228976F3942CD
-:10EB4000AEDC7D87D28CF651F8B2CA6CEB7E68BB26
-:10EB50008BEF9BEDFFBD0730FEBEB6D64B711B732E
-:10EB6000DFDC5CF70D986485F90DED3F0B205E9FAF
-:10EB70008C94F8F0F9ECCC9D245FCDFD7F8F98D379
-:10EB8000EA993BBFDC8C72294F269DD251B86F0C9D
-:10EB9000EE27DE5BEBA5FDFD70A0AFE759560E7EBC
-:10EBA000E436703FFBE9EA7493D55FFDB18BEBA5CA
-:10EBB000FB5DC2CEDA68DF6F66FC70BF8B7DF70449
-:10EBC000E3B45F297B459E84C3AF31F111DE972FFB
-:10EBD000174FE6CF92C983F6F883827EB60AFF66A6
-:10EBE000A3B0CB9DFD14376BFBDC68E7DFA4552A8F
-:10EBF00019F8735CABDD2E286AB1D3FF98663BFD34
-:10EC0000878C02871D9126BD65EADFB5BEE078B42A
-:10EC1000BF2A997EE4F680265BF7D79DFA77A71A7C
-:10EC2000FB99EB2CEC907020DE82F876DAB5FB04D1
-:10EC3000DEFFA2C4D288DF801ADF47FDAA719237B7
-:10EC40004E3B61089CC0E09C3C229CBF3A1B384F65
-:10EC5000B71FF0911CDFF22203797616883C8B10E7
-:10EC6000D91F1D21EE9F74B8B85FD02FE8E80D972B
-:10EC700042F33B26CAB303D092397F8CC7878EA359
-:10EC80002182F54667CED7450B85BE8FC9FCFDB8FE
-:10EC90008BEFABCD1E37F2381F88717EADC6FEBF3D
-:10ECA000CBB26FF3A42BF69EB5FCA18BEF830DAC1A
-:10ECB00087C8C735EDA53D6AEC235786BCB49C795F
-:10ECC0002AEDDF9E00BFA130FC3C930FBB81C991B0
-:10ECD000672481CFDFFB488F99F81EB0A7517EA033
-:10ECE0003E381C4861FCC45C0773DFC59C87693FE4
-:10ECF00094B9B93C6174E37313DC71BE3F08699247
-:10ED00000F05826EB6FA16DE53CB9E77CF7CFB35AD
-:10ED1000CC4F78F7099F8E706DAA3A12B6CA4D682B
-:10ED2000B6D38FF9DEF5F118DA97BF554A8C765BCA
-:10ED3000E328917E37B67F46D2C97F4BBEA290DDD5
-:10ED4000FB8C949A44FBE82AD0FEC533374653EB3C
-:10ED50002DFB1B4EBB3EC7D7F7C0729C7733B39FCA
-:10ED600060E8BA9976B959C63C106BFBF96CD9B911
-:10ED70005DCDA6CBF8BA42CCDB50630A100926E879
-:10ED8000391D747A32FBDF7033BC5D00FDF9C84772
-:10ED9000AB03632FE2F6C67F1BDE66E378FFDBF092
-:10EDA0003648B74E3DCDF719F2041E42D042FBED76
-:10EDB000BF685ABC6E021BCF5D18247B35AFA9FD1E
-:10EDC00066398CD97DBD1AFA977962FF1B1AB97E14
-:10EDD00036F7A373EAEDFADCA9BF3DC2EEF00CA34F
-:10EDE000D79D727338BDBEC46DD7EB03F1E261E409
-:10EDF0009F335E7C7AF9A7DF535B8C7919B1576B2F
-:10EE0000D9BAEC9BA5527C333C1EAE8B5BE8E1B0DB
-:10EE10005BA1FE0EBB791C643DE3D7D4399CCFE1E6
-:10EE20001CD4074C01E1FE41919CC2FC9AB5C95427
-:10EE30001DE69BAD552768D675AC2E62762DC3EBCB
-:10EE4000A61A7FB3D5DE7ED3EFE271D840F541E458
-:10EE5000C7F260AA86DCBB1873FC46F13C4B5CB77A
-:10EE6000F334E8C37D570F70BDCD38C2CBF54AAD42
-:10EE7000F616E56326E0546024BD60CFBFDCA9A68A
-:10EE800056FB111F111E6F096D91281947E989A5BD
-:10EE9000D17F981C58B095E4901A2FC371F64E6339
-:10EEA000662FABFFE15E37D9393DA1312ADA95CF24
-:10EEB000C88BBFE766F3ED7FDD03B87FD2F3D9B926
-:10EEC000748EA12774D15CA4831E099827CBE6CF4A
-:10EED000F88727FB4000E3F4E13931C03865FF2FA4
-:10EEE000C078888DEF8AFE344E79BA100BC833583B
-:10EEF0003B1F7461BE8AF1A9FFFD4B18DD3D1EACBE
-:10EF0000BCEF7C18F4FB4D7FFF627FE231E4C78EDB
-:10EF100051BF6B463EEB62702A6487C5A2087765D5
-:10EF20009E4CFC0779C1D404F6BEFA60A416F3CF58
-:10EF3000AAD50A94340C0EBEDE877C892771BEB533
-:10EF40005A436D36AB5F7548277B656EF4E6FD5816
-:10EF50009E7698973BDC40F620F22F58F8AFFAE304
-:10EF6000B134BF5F0A39DE1E8DF5C6A411D64353F6
-:10EF70001DE737EC792B563AD0A6D9E820E1B2D27A
-:10EF8000C10C460793AD741093CE860EBE8D5838D3
-:10EF9000237EE17C729BC2F96628DDB77873CA874D
-:10EFA000F28739EEFAAA9C08FA19261F68D3EFD225
-:10EFB000B0EC59E4267FCFE40B931F4E7AF9BE02E2
-:10EFC000E38B3A1F7B3606F54B33F105FA7356FA9D
-:10EFD000BF72183E990FFDFB31C77EBE0AC92C26B1
-:10EFE000427E7DE1D1D2B116BA77E269FE2C098E5C
-:10EFF00058E4D1A953BC6CC1A33690F7AC9C39BE80
-:10F000005F56F58E8885EF3A99FD8C4661976C4086
-:10F010005E31F2DD62BF07FDD5FAC7A214CFF7C497
-:10F020009B294F6DFA3B811B181D7E384AD671F221
-:10F030001DFAE247897F5F0B00DA6D9BA62D1987C9
-:10F04000FEC9873726C6A13FB68EE1FF081937A94A
-:10F05000D132E53EF58DE6FB637A943F1351FE1EF7
-:10F06000C4F79428C744BD3EAAC7D6D9260F377B1C
-:10F07000397D6FF6723B709DBBDB8BFCD55FECA5D9
-:10F08000FD53B3DE250AB7DB6678787D38B946C70D
-:10F0900078D50C0F6F775F5B2AFEE6048473073D1B
-:10F0A00073EB5380F17F7F5952C7F8BB7735243219
-:10F0B000D97DF779791CC0BBEF9F68DF28B7D4A052
-:10F0C0003856A49EF56759AFF90C35594C7E30700F
-:10F0D0006348C71DBA9FECB0F9919A3FA95386AE19
-:10F0E0002FFE39625927EF5F95440FC50BF87EC696
-:10F0F0004AE1CFD59678892F3A5ADDDB712A0B3C4D
-:10F10000D9DC0E8DD48C982F8B7E53D283712E2F09
-:10F110003D713F23790EDFCF487AF87E46D2C3F7A0
-:10F1200033F089FB19F81DF733B0FC93B6189571CD
-:10F130005F03CBB8AF8165DCCFC032EE67E0734FC1
-:10F140005B333D7FDED642DF9F6A6BA5F2251E6EE4
-:10F1500067435932BA80E1B9EB76770CF7A9D789C2
-:10F16000F5793656926BB075F445B8DFE97BE15E10
-:10F17000C0F9F8A23C6ED419BD17AE67CFAEA9A1F5
-:10F180002EDC2FF63E1AA4A74FBD0FF420EE4F241D
-:10F190009B3153B6C5F3C41C95E9F7D2E8CD353998
-:10F1A000AC7CABE7C93518BF9AA8AF32166B836544
-:10F1B0003D54B9E4314B795CF976D5CFEADFB9F645
-:10F1C000E935C8A708071A6F1D9EF49C556CC9D372
-:10F1D0002540E735FA8BDD29A4B3AFE17A21FD782C
-:10F1E000B85DFF655813453F799CEEAE44FE60F56F
-:10F1F000D39C2ECFACFE3ADC94CA1BDA6EA47A7292
-:10F20000D519D5036584FEF0BB34423F1DB046C31B
-:10F21000B3631B9097312EE80B909FD6E5E27CD923
-:10F22000E5E3CFA35E73FFA8669E978D3B4FF06921
-:10F23000972F5E87F9CAFD93658A17F4B858179817
-:10F2400084DB5AFC9B1236EEADCFAB8071E694871F
-:10F25000DB3713C685B8BEBCD34BFAF24BE37EDC7A
-:10F260009EC3CA13BE6F18A8FF3680E1473A496EA5
-:10F2700094693FF74755E3731A58F5F3A63E918317
-:10F280007184CF047FA7F07C112BAFEAB8611CC654
-:10F29000953E7C89CBA547C538DB5DBD2DB49E531B
-:10F2A0008364370074935DB02AAAD23EBC9CCF9F82
-:10F2B0006E97F67758CFCD146F92C1E3FE6CBA9774
-:10F2C000FCEF8F3DE25C5A2FD90B6E5F42CB66EFAD
-:10F2D000BB9332F1FB1ACD9FC2D4FB0DC14A3A2732
-:10F2E0009B2C5729CF7A43398FD3054257A7D04E4D
-:10F2F000B867AF8FCB87A097F2AD52E5BB0FD6446E
-:10F30000F0296BC8EFA9D8823AC2BB266B94B7C567
-:10F31000FE46DF9B239497BD01C4BA34F37866C7D9
-:10F32000A84F7F85F1DB355FD70C715688F21EC977
-:10F33000B491F1DC6EFFBE00C2F315F39C51DFEA1D
-:10F3400000ABDFBE5833701DA66835751827ECD0AA
-:10F350006ABCC85781C9B5DE45248706F292E93CEC
-:10F360005B7B39B757F13BF225B4C37E3CBF3246D5
-:10F37000C8B24076A584764E473D858D306FD796CE
-:10F3800067D99E7319E5B12BF37308CE0E8879B156
-:10F390007EB29EC79DC704BD69B4E3C698F1434CD5
-:10F3A00031B6F811B937D9F394F39B55DB398ED1C7
-:10F3B000097B394FF805798E7CE64F3DE63E8A1D84
-:10F3C0004FCEF9E6461ECA467873F160B23E743EEF
-:10F3D000F7452A1B709E63343FC11DD55657A3FCC9
-:10F3E0001A0D2DAB90EECE1A5E079C53CADB7B71D3
-:10F3F000DDA7E82A9D5B381FFA5763BF1B049D7782
-:10F4000015DBF564CAC3FD06C68F95C88F18E74A99
-:10F410005AC6C7386FD232DEF8AE1C5B79427781AC
-:10F42000ADFE395B4A6CDF27A5CEB57D3F6F47A5A2
-:10F43000AD3CB967A6ADFEF97B6A6CE58AF465B6AA
-:10F44000FA171C5C602B4FEDFD3B5BFDE9AF2DB661
-:10F450007DBFB06F89EDFB454757D8CA17F7DF610D
-:10F46000AB6FDACD4EBD58EEFD7CF6B207CF75D945
-:10F47000E282767BDC694F7BFFBA465F8D722DECB2
-:10F4800026FA56518FB3F28ADBB93FE39D6DE82827
-:10F49000574A841C0D056317E2BA5587BDA40FD4E3
-:10F4A00020AFA706E792DD31760B934717A015082A
-:10F4B00003DF032897DB92F152D720DC3EAD9BCED1
-:10F4C000285487EB00E3BD667B558B412284E3E93A
-:10F4D000DC9E61DE22D6F3E9ACBD651ECFC8321DCD
-:10F4E000E9EE677ED74316BF6B383FCBE9579DA93E
-:10F4F0001F3556063F3EB74BF1167C96B7BC54837A
-:10F50000E974CCBFFA0AE261933BDEBC1DF7434AC3
-:10F51000FCB42F66FA575DC53DC417FDC52AE9172F
-:10F5200050F5F20596F8569797CBFB80F701F2EF6E
-:10F53000D492190775C4FB2A95E20E1B241E1F499D
-:10F54000B27540BDB66DE6D1F7FE91BDF79678C7AE
-:10F5500078993C329E75C770BFF33E81D712ADA239
-:10F5600086595CCCBE68D887CF893AB333D8B3AC60
-:10F570006CF33E7CDEE1E5F974E71A8FD5A02CF13F
-:10F58000CEE6F69F32C59D5A8DEBA7713886A33320
-:10F5900035670BDFAF2A55DF427A436BFB943C485B
-:10F5A000073EA403899E443FBE4890F4860F0F7720
-:10F5B0006159955201F63D521A9330CFA23ABC855B
-:10F5C000F6557C69BBBDCAFCCD2EC46BA4DEBEDE85
-:10F5D00001EF3682AF5DE2F1D7AE6CFD851A067F92
-:10F5E000575E490EC64E303ED16091379B85FDD6A1
-:10F5F000E4934DFD4FF24646DE983A68EF30FADF6D
-:10F60000228F47F8BA01E596EFAE6E407AF7696C43
-:10F6100035D1DEFE5692E8DFB4776F11BC555BD270
-:10F6200044FB5EEF472AC9BEF5B5FE2423FE7C7D70
-:10F630000AC42E181EAFE1895B49DF43895B47BBD3
-:10F64000A25577C7B667900786D007EB30CF03E1A6
-:10F6500011791E5D021FE6BEDBFB66FE93D807BE76
-:10F66000251B6CFB7FB7E4558E1EC91EF731BF2FDB
-:10F670006181771D1B07F1D271B2A12E4EFB80C0B4
-:10F68000CFA57D56BE9DCEFF0AFFC510F6CB0C0F51
-:10F69000C7EF5837909F3007E31717A0B7F9E53A3F
-:10F6A000E44B33DE71C49B43F83792A0B490BDE2C3
-:10F6B00032F5967CEA7C8259779B714A3279B95E41
-:10F6C00063FFEEC57314E3BBECE7932674DBCBE773
-:10F6D0006CB19727A5EC6566351F42BBA001387E4B
-:10F6E000CEDB61FFDE60C6F96AF9B90A2F1BF91497
-:10F6F000D7BFB673AC20F4BF194F2DEA4957A37892
-:10F700002D5C69D7AB0542CF1738F4676548213FB8
-:10F71000BFFA60643FDA8F66FCE510267F59E2A9E4
-:10F72000661CC529CFFD873703FB42FE72C2C3E3C7
-:10F730000B09E6DFB4168AB845117FBA14FDC585FA
-:10F7400064A7B59C83F2E9696FE2032F192DF67364
-:10F750000FC7EBD45F483A1F276119E7B6B2E497A9
-:10F76000F8F453944762C6314C3FFD642036CFCB4A
-:10F77000D67D83F172CBB318477ADD03D8CFA5CA03
-:10F780000B07DB587945914A798FDAF49BBEE7C7BE
-:10F7900038207E67E5EA627D34D1FF732EF2D7D739
-:10F7A0000A7A36CFE398718F6C1FB79F433ED32EF2
-:10F7B0004AFA455EAB1FEDDCF37630D96CD3733C6F
-:10F7C0009E66C6CD26F7D8BFF78094ABB1F53BBF98
-:10F7D000292573BB2A16ACB6C4D5CF15EB356561A8
-:10F7E000FADE85ACBC0B5295783F4485A00B63BF15
-:10F7F000FDFCD72890E89CC0A8438A9162F5A73CFD
-:10F8000065FF5EEE381F76AEF3BC9823CE1B52E048
-:10F81000BD456CBC8D7A8B84F273E34266C3B3F250
-:10F82000B93E912F3C112622FD5DAA048D34E2F7EA
-:10F830001585F486E78D735E5D84FAFC259E97A29C
-:10F840008DD737D7B2B2F62B85F49316808A8AE02B
-:10F85000605CF8FE5306B4BB06E34C3BD9BA964E47
-:10F8600040FFDA0BA8577EC2D617CB3DCC1FC7F29C
-:10F87000E3CC1FC7E76EE68FE3FB9F317F1CCB7B9A
-:10F88000983F8ECF9F337F1CDF3FC5FC712C2F0F1D
-:10F89000545FE28C5359E3768371AA3EC98C53A11D
-:10F8A0002839EED6699D07E255091EAF3A7D3F31F2
-:10F8B000B31F8A070EE947C405DFBDFD778FE079E6
-:10F8C000E9A5535777E1B957AFCB8C8BF13C08339F
-:10F8D0008FD9E4BFA5BB6FA6FD6077FEA1165C8F34
-:10F8E000DD5541BA53C8ED4A68281F9DFE97E97758
-:10F8F00039ED5FF3E9D4477EB4032E403BA99BE288
-:10F900003EEB5D5046E76025BF817CE18C439A7CED
-:10F91000FCA2AF24E3F9A5817C58119FF140CA8B6A
-:10F92000F132B724E629F2354984B12E36203F5B07
-:10F93000F28B83E5698A73048331B2BF24669791A1
-:10F940009DA625A21887EA1C26FFF541C1A7ABF2A8
-:10F95000DD746F44673EDFFFAF2D34A2D87E4DFECD
-:10F96000B4A8351FD6CCD7DD1F9AE6EDB3F4B72285
-:10F970005432A29E52985ED547D0AB8A87E7ABAF90
-:10F98000D977A117F390D70717F7A27DB53E1AA133
-:10F99000F3EA7BF3A791FD31503F3A83F29595202E
-:10F9A000B75B95A897EC5615E75F3E58DFACD72AB2
-:10F9B000E433633F8ACF05823D54CFA3C629FEE1DD
-:10F9C0008900ED5779BC3C5F20C8FC6BAF2D6ECA37
-:10F9D000C7BDD9C7E5DB7A3D11C776EBA3AA8EE296
-:10F9E000687D5925E1798DC0F39A3C53EF1B646F14
-:10F9F000F4083968F6B346F8EB6B9ADD6477C55BBB
-:10FA0000B363B5B9947FF903E4BFF5C187BC98CF60
-:10FA1000EECEAF1AB1DF27C5FA0DDFEF1B35B517F4
-:10FA200050BF3D3E36BE3BB458C37E5DC3E4D91FD4
-:10FA300014707E5EFB92614EA3FD2E30F56D2A6A36
-:10FA4000DD27763EFD68275E30B4DD52BD6F2EE6C1
-:10FA5000F9AA90ACF32B43CF292CDBC3EF9DDAA49A
-:10FA6000F692BDB3E9A494F1BC43965F12CEFE803A
-:10FA70001F6EB357C6087E1A23BEEB68AF14A35F90
-:10FA800069B72F2E38682F4FEDB597A7BFE6B4574B
-:10FA900062AFA0BDD228E45D2F93CF3C69A25F4541
-:10FAA00039104FA6AA11EE06E85985FB942E11676E
-:10FAB0006E14FAEA0AA1CF5C7E1E971DD3ECB7F94B
-:10FAC00089E6FD1985A2FFA2DAFD37B7A3708D9BE9
-:10FAD000F68F4EFE65D1BCC7AB494C3AECA0869878
-:10FAE000FDFCE9150E3BC7690F55ABDB29BFB2C062
-:10FAF000117F30F729719E780ED739FED98E6BF6BB
-:10FB0000B795E92DB457CC7B09E8DE2ED6BE484D1B
-:10FB10004B06C353410B50BEDF989510DB9E818E80
-:10FB2000A789751F82B7E42584B739E25D4190DF6C
-:10FB30007B5250ABA4F462CCDFEF21FDBDE0263652
-:10FB40001FB2974FD13EB4593F27BB672FEE136EBC
-:10FB5000AD97B8FF9804B243CC75DE1AE4E7651A96
-:10FB60002E965232B66F29A1F109AE92C1F5657891
-:10FB70003AC2F1C4F3CBAEACB39FEB6970D81B268D
-:10FB80003D5CE178FFBA4F23FA30F9E0DD0B5F9B73
-:10FB90003896C1B1544AD6059433D79316FE709D5A
-:10FBA000423EC4BF8FA2A9107FECF3FE54A3FC8099
-:10FBB000ECBE078091E4657E48D6CE02F8377FFF21
-:10FBC00079122B37F8CB3BBA2EC6E389FD3F42A30F
-:10FBD000CCE3A9B8B4AE68B0ECF75F4CE588188701
-:10FBE000B91649BEDE967B0A18BCDF15F9011B6207
-:10FBF000B059C11C4B59DB6C140FB6CBC176D2087F
-:10FC0000EDE2B059CDD02E68B663E8EA34EFF528BE
-:10FC1000C127FF2E0B78ACE3AB88374D0FD2B99DCF
-:10FC2000B9AA86790F5F148E51A79B770236BBC69F
-:10FC30000F6DC7C05E65C22F67863F85DFADE3BB32
-:10FC40004680FF6F8D8FD3F5E716DFCF1A3E567DC6
-:10FC5000F5A8E1E78B70B9E87E0C3D285BFAB9673F
-:10FC6000EF2714BF56AF053A97A3BA629AC1E8BC12
-:10FC70005CFB36F9E16A76AD8676C03A56463B6063
-:10FC80005D4F37C5A9CB4BEFED42A22F4FFB01E5EE
-:10FC9000C164D0B277B17E276B2A66E2807AF17EAA
-:10FCA00019E3DE7039D0B990ACBD7E7E8F45F1CCC2
-:10FCB000EFA37F949DEDA53850207BDAF7B9B1CB47
-:10FCC000E3C126FC81EA43351827571BC040565430
-:10FCD000A5145423934D02DA87F0C776DF86E72B0D
-:10FCE00099E223FD44773BA05E1571F1D19C64A09D
-:10FCF000CBAD35A09F907C5EA5F8FB68BCF2861169
-:10FD0000657979CE6684A73CC13A90107E1ED79A59
-:10FD10009C908D34EBBFF23DDE0EFE9D9F0760BED2
-:10FD200044D313C141BC9A7265B488974717DAE38C
-:10FD3000C9D0CFE6CCDA57FEFB821F603C61D410FD
-:10FD4000F9CDFD6BF3DE9CACF720FE04ED6BDAF52C
-:10FD5000865FDC4FE177DC7B302E683F8737C46FEE
-:10FD6000F8569CF480070CAF9BEC8B85643798FEAB
-:10FD7000C856AC88F1FF22E079D9CEF6D3787B88DB
-:10FD800072FFC4E367665E25FBBEC41FA37C1F0F22
-:10FD90002B333C4A6EF0E6B3F705328F8BAC9240C2
-:10FDA000C5F2E07869DAA75F2B195D8634E8FFAE0B
-:10FDB000D10CCA1F809539367BD9CC435D7163F174
-:10FDC000E81CF6CC1A3CFFA3213DAEC82B25FB391D
-:10FDD0009CDBF7F7285F8FAF5F7FA917E529E62F38
-:10FDE000CC04F8ABBFA323C9E4ADE7E331A05BECDF
-:10FDF000328FDA427130CFC7636DEFD36DF6F38285
-:10FE0000B1A05C8BE3E461F23EC683416BC776D55B
-:10FE1000603F17E8F938DF66A70FF65F687B9F66DB
-:10FE2000F68CF53E8AE1FB0F805E66ED7FFC30FDCF
-:10FE30004F74F4AF65EC7FB0DF5C5BBF1D2A8F8F22
-:10FE400026237E5A77A73D3039505310C81B217E98
-:10FE50001FE0F1C7B5D1168ADFD700637846279730
-:10FE60009C3CA2F0F36B40761B14DAE3F735827EFC
-:10FE700065461148BF97A8F67BC06683F35E30BB2A
-:10FE80003DD48B8C827E65A8AA97E2F89F0475F416
-:10FE9000BF86B3977BDB80E2C7B3037DB7E03EF557
-:10FEA000A51B1E7075CC10F9AF05CC8ED8D0732968
-:10FEB0009EF3EB15E7F33A2232E1255E339ACEDB6F
-:10FEC00098FDC4DD3001E5615CE6F909F4878DDF5A
-:10FED0009B57F0D0FA0CF8739EE76C8849F1520BEF
-:10FEE000DDF4CA0CAFD6F1E68CD9AE58E611F7C0F6
-:10FEF000541A4FD8B903E38DFA7CE3BD24E24EE6F1
-:10FF0000780D73EDF36B706B34BF06C1BFE6782FCD
-:10FF1000E1FC32E0F7B4E3C99C6E06C6FB927D7E3D
-:10FF20000D1E8DE6D720EEF51D186FD4E71B6FADC3
-:10FF3000AB258176DB6689F3FFDD817FED40BFED88
-:10FF4000FDFA1551D207C22EBE021BB07A57A87C0B
-:10FF5000BCF985DED42ACB785B991C88893CF7985C
-:10FF600007F337342AA7DAA2F47C88D9D931CADF5B
-:10FF700028A3EF8FB41954DED136839E663F6533D4
-:10FF8000F83D3393664919EDED5F06B8DFB8395F88
-:10FF9000BBF66BA897AAFDFCFCE38C8B2066B17FB7
-:10FFA0009941BCCF87FB2F574305EAB6895B38DC04
-:10FFB00091DA51295C3F7FC5FEDE3656F6B85C3AD1
-:10FFC000EA53C60BF14C7EEADE00F7C33D6E2EEF1E
-:10FFD0006126BFB770BED02BA0D44B2EC4C715D995
-:10FFE000B4DFBFA03116D218DE1A25E99552A1A7B9
-:10FFF000F0FCCA5562A99C767E043506EB37125395
-:020000021000EC
-:1000000052781FD15585079B502FC74357927F10B9
-:10001000670D73583F57093D59FD860730DF012EA4
-:1000200075131C8D8D767B7EB32FADA17DB2B92269
-:1000300002B83E0BEAEDDF3D6ECE8771C73D05F39A
-:100040004F736F01DD9D95218FD4199F7C32608F96
-:10005000439E80F27B6AF1636164C47B0B5604C0EB
-:10006000BCD73263FCC884E74D94635391DEF650ED
-:100070003CCC84AF404D4928AFC734EFB1E53531B2
-:10008000C492316CC6E141D955817E88733E5BA52F
-:100090005DF923DD535200EA5B7D65E21E4F69E89E
-:1000A000BC7F1710F9B703F39EF5622964E21F1EA7
-:1000B000779D7F503156E9837831F1F03FCD479DF0
-:1000C000018ECF17E77C50C5FDB742DB7D99E63D39
-:1000D000C0570E9455502DF47CC51237D93310EB10
-:1000E0002F47BA3B747180DFDB66DA2FE9D765B43E
-:1000F0005FBE78FFB1225BDEA6E877B8F572E61145
-:100100005ACE7D0EE6B9637E89C4F7B10A30CF2D91
-:10011000CCDF1FB1DB99B63CB7357B7F28619CEF04
-:1001200001CCC7B3EC5B8F61FE3CCACDC29BEC79BE
-:10013000754EB8CCBCAA8173B3B31AB55D3ADD93E2
-:10014000D88D17CF746D49C6C1921F699E1334FDB7
-:1001500069E7F94025C8EFCB8B8AF316CE78F06DAE
-:1001600072522B96301F35E5AD66CFF29C848147E5
-:10017000D36F539275F85E193DB319F1B0B0F54ED7
-:1001800003E3775A6EE6B8F442A1BF2F0A72BA3978
-:10019000EC4A17611C3B91537351302F43FDD66FCE
-:1001A000517FB387B97FBE51F4F380D0E7CEEF978C
-:1001B00007795CE59AA532DD67E183504A2AC67D5E
-:1001C000E3EE19742E6FD95623D3B9B783E144BD3A
-:1001D000151E5F293F6F0DD07321E26BDD5F1EECB2
-:1001E0007994A132E72F4192A3390AEFD7D2BE31D9
-:1001F00053FB673EF92D9D537E06CFA9CCC4FEB6B6
-:10020000CEC5F8F7A6813224252C678B72F2B6B9D9
-:10021000E8EF0D962BE6566319699011D9ABC1DA58
-:100220004EA4974D120862BC94D777F1FABBC5F77C
-:10023000D997BDF37D3C970BD3DCE4076E12F688AB
-:1002400009DFEB419E37F3FA69F079ABF81E447C85
-:1002500046CE0A9FB766C2C7EB39B1DB8253B19F66
-:100260001EBA17D2F717EF4ACC23FEA73630BEC608
-:10027000E6F080B1FB87F700B5FF5670EAD0F6F3E1
-:1002800072626DD86F70E9119A5FA83488EE0DAC78
-:100290009B0ED44F0638D666EAC75CD774169763B0
-:1002A00027D076CEC375E5F69FE2E98DE2FEBF5614
-:1002B00075FF2D1A93239DC5DD4D99E8FB3B21BEAB
-:1002C0004F9D3D4CBC7A97A0C757B5F877118E76F5
-:1002D000ED5EBA4FD52D71BB61DD8C3E902CED7E6D
-:1002E00015E2F519DCDFC3FAEE0BF93DA72186779D
-:1002F0004C300B5571F8D7E98700F3BA43D14394DA
-:10030000171AAAEA237EA7A30A059CAED05FF30AB8
-:10031000FB6C57F0DAB94817398A49777FEE443ACF
-:100320005406CB4497DB7378FB97427FEE4C3291B7
-:10033000BB8DD92F78EF46B280E78D38E7F72F21B4
-:100340004E1FF787638F23BC43F0E9E9FBFE3DAC0A
-:10035000FDA609FCBCCD6CB9B7E97AA4CBCB82640D
-:100360007FB1F74DD673C86F0A7CBD19E4F6D3A6EA
-:100370004FBCF4DDB91EC3D1EB0BA2FDE7A0D7172C
-:1003800032D109A3D77F477AB3D0EB0790995E0F9C
-:100390000D43AFAF607B275E9C6505625B707F5647
-:1003A000FD74EE0EEC4FFDF2AC2D8FB2A7F2E95DBD
-:1003B000495A4D43B29D2F35C7A99012FF11B4C8B9
-:1003C00077F33EEE1B83BCFF21FD4E9FB605E5D8BB
-:1003D00019F47B2C387568BF4F0539BCB32F0B2639
-:1003E000329D1FDF1252E9FB43213EFE707C7330C9
-:1003F000C4FDD9E1F8E65141578C6FFE7A267CF3B3
-:100400008741BE7187F2CE846FBE4D4F5F29E71BD7
-:100410003A863C7328DF40F2D54E94AF9DC59C2FA1
-:10042000466F7AB313E31C037C943C41DF95C132E1
-:10043000C963938FFE73D309E22367FBF030F75251
-:100440008D15F33E188E17E13C62E769EDFC9C4D7B
-:100450001FE9EDEDD0BFD74379B63CAFD59F4CC671
-:10046000B8D9D00B78BE7FA2C0C336F4C1D0CF9923
-:1004700026E24C6A2F2C080DE5E75055BACA7A9F40
-:10048000C0D362FC0F43F1C9A1A9385EDF24B4BF19
-:10049000865BA74A31DE3DD9B1CA5006FE3F9D1E9C
-:1004A000BA26C4CFBB5E23FAC9F98BB705ED4F2737
-:1004B000BFCF5EF6F33F3D32423F8DA27D7DE873B4
-:1004C000F37F7D2833FF5F1EB2F37F15DEB799817E
-:1004D000FF1B33B567FC7F55E86FCBEF8B4219F8F4
-:1004E00072E619E2FB6181EF87BF20BE570B3AB974
-:1004F000E3F3E3FB8E61F07DE719E27B7528837DF2
-:10050000C1F0BD2644F6CAE3047F480F521CBB6B02
-:100510003AEC964A32C2B1C1DA8F57E7FD30BC7F60
-:100520002031BA9FFD699791E99E19D6EE5E2BFCAA
-:1005300066BBCA9066266FDF8CFEF9035F0E52BC65
-:100540009FE9C7FBFFC674F050263A982D7339F423
-:1005500041F0B14E8CB37D81FE7F92A9FF6621D719
-:100560004F6717EC1574C1E6FD4468EA50F9B75DB2
-:10057000FC2ECAFDE1C45321C257DF3C9457DBEE89
-:10058000C891301E55184B4BE8273C2EF4D87921E2
-:100590009D9F6710EDB6A96909F359B6B568129E1B
-:1005A00037B2F4F74B1C6FB8FE9C7030F89EC3F165
-:1005B0003F0CC59EC767A598DFD9DA490DD9B19719
-:1005C00043A47FE287486E9F6397DBE63CE478377D
-:1005D000E5BDF86664FEDD96C783AAD063F1DF5BF4
-:1005E000E5FF2B0374C5FB3B5BFDC3E07B2BC4F530
-:1005F000CAD14CF039F1723A38F34203701EC77E0B
-:100600009D7ACAD99FE9B79AEBE4469D648DEB0CBD
-:10061000E8BDC45F897F3B643A87345FC893F93390
-:10062000B285DDAEF9B1FF07449CFC819BEEADC6FF
-:10063000FDEEED77691588828266AEF7F49BC652AF
-:10064000FCD317966C714CF339D0DEDD3309EF190A
-:1006500067E386C2ACDE25B3208D7E6316DA0D1407
-:100660008FD0E877BB723CDD518C9FAE93BA9B165E
-:10067000A35E9D17E4E74AA28DA7B9AF6DB58D6E55
-:10068000215A759AFAABA8BE16E8A6FB2FCEB8BEC3
-:10069000A7BB29537EC994B06CE275527824BC463E
-:1006A0002314D732F13B741CBE7ED5F11609F11D1F
-:1006B000AA92343C7A15627482F6925CDA4BF94C59
-:1006C0009757717A01E6978C7C7F46A769AFCD0A70
-:1006D000E77D71B8CC7AC38F27EA39CE2BE0BE17FD
-:1006E000C567835C8E5145563E7E303763DCDF7CC8
-:1006F000AE6DD30A5597B5FF14E179ED40FEB41104
-:10070000457BAB15383D42D44B7618DDCB6E59CFC7
-:1007100084589FEF66C5FF3E4CF019740F2168DACC
-:1007200019CD87B55B4CED54D62E74E6ED867F9AD5
-:10073000BF5767E871CBBD6726BF8E4E2401EF9986
-:10074000F1978326B1F58F84CC7D424E07DF0E9A58
-:10075000E5246D92C74BBB795EBE6ED209972B5ACA
-:10076000A0272657006CBEBBEE4BD149ACBFD2448C
-:1007700014AFD067E5032AF9E1BC0CC9BA03FB0B3F
-:10078000917FB4732583E9A9F6DA03072F067E5417
-:100790008A7E4FADF600C93BB38C175294B1B27F3D
-:1007A000A01CF34659B964A09CC4F236A12737DFD8
-:1007B0005D7BA03D48726CA3953FAA051DFEADE987
-:1007C0006FBBDEAEE13983645425BB6A9D831EF6A0
-:1007D00084F97D2C93B5C4365CD7F977F5AB787482
-:1007E000C55B1C09213F8C8B7E90C4FBF2C6CD12E9
-:1007F00069AAA5FC9E86EDD195C497DB715D80A7A3
-:1008000025607C72707D5299D7A72C45EBE3D7F910
-:100810007719CBE46FF3F85BA08CF3B3E6E1F1BD9D
-:10082000C704BDA6C33C7E9416F2352BDA4EFE9467
-:10083000B74EA6F871569D6CD31BF48B77D44EB58A
-:10084000DDFBFF7A4EE2A9B0452FB01AF132360F28
-:10085000FFA4480EEEBF5497A92BD1DFFE9EB0FF38
-:10086000D83A3D40EB5411F127486EC79FB5CA8F67
-:100870008175137839DDBAFDB62D61D4BA865FB7BC
-:10088000ABAF5532DE93F6DB30F75F8F35FDE7FD1A
-:10089000389DA5DE7EBABFBBAB7415C561CDB8ABC4
-:1008A0006777757A8C3E980FB83A109E854FE7B8F7
-:1008B000BF3DF95D8DCE897CE2C9B89F7452E0F9E5
-:1008C000505B13B5630B4CBFB7721D4E85E7B1D9B2
-:1008D000CEF199E711BE0A9C181AE38B2E4739B462
-:1008E000B849A17B1BAE037B3EC557CDBCAF563389
-:1008F0003F8EE77D25207B2EB2E1A2A4E3F722C044
-:10090000988BE7E887FC8E84D8DFFABA236FE29AE7
-:10091000A64546ADA8F73EFD3F45F369D4B9FC6D49
-:1009200034F8FD3D57C5AF356A2DFBD1AF7EA664C7
-:10093000CC9B9C9765E2236ED44E188A8FC571C9F3
-:10094000ADE9A7C7CB99E261915A31374F1F8A07AA
-:10095000E7FC19C636219EBFCEF08C76E770F860B2
-:10096000F5683D5EBD56A1DF8F99ABD4BB701FE427
-:10097000FA0689F698187EC3222FAEFE520BBC4EA3
-:100980003C3AF175FDD340E706AEFF4E88E26D2F8D
-:100990009BF8495F42FB17E6FE89659E4778FE9605
-:1009A00046F35C30A3E217786F42A25DA2FB1AD92E
-:1009B0007C6DFB808B219E85E716D8BC8F0CB3EE37
-:1009C000B6FD40277C4EF87D42AF38F7C5404D97C5
-:1009D000A31E9C9D25F605A78021F6C7B2281DB74A
-:1009E00034B3BC75DE3767D2D975AD0D03E362FF52
-:1009F000122406CA1A9ED77A4ED97415FBFB8A2890
-:100A0000FF1DC3F8B5B91DF86D3E98BF2F14A3FDA7
-:100A1000A6EB04FE1A98C787BF7D7609134EB8AFC0
-:100A2000373FE6D38396791EEF96EAC439AAACC65F
-:100A3000C9D82EB957993214DE1551FE7B858C0E1C
-:100A40003FB0D2A16F02BF47D68917135F8B06F163
-:100A500032E56CF0F22A2ACE3CDAAF213BB75FF2E6
-:100A6000D27978731F87FD35E966A2F3D6AC62614F
-:100A70000FF0799BF77701B4907DBF509CC73AEC9B
-:100A800082A6C7827C5FA7D222B76ECBA9BE35CB28
-:100A9000E2579BFB3AE67D51263D7FD51B4C2B9CB4
-:100AA0000E6DF7410DE63125288F49C9BA49477CBB
-:100AB00074E1A70BC9EE5985FD2B01BE5FE57BEE06
-:100AC000A75D57E983EBB7FE6B4F744F6565FFD7A2
-:100AD0007F93A44EF51CC25B48AC5BB55837133E00
-:100AE0007F397F6F593F1E3F2B13F133B18EC3E91E
-:100AF00009731DCD75433B0AE9D757A67E9AE9775E
-:100B0000F7607F553FF26922AA520E5D427AB383A5
-:100B1000EED9027D1BEEBF5FD7EAB2FDDE5202CFF7
-:100B2000E963FD753EE19718D47E713E6F0F65DC79
-:100B30006E1CA0FB246B6FC903026F7814AE5B1FA1
-:100B40006B8B7962ACBF51A8EFA1CB324EC9D0718B
-:100B500087EDCFD14E19D837310CC322AF1FCBE26E
-:100B60007AF278B4AA47CE107F319F8BBDB985AA9F
-:100B7000253FEC48BEB729E3EF0689FE06EE8D1B44
-:100B8000B013DF39B07FD6A09DB8C1F5C703078B7E
-:100B90002C7622FCF100F9ED03E5B3B3135FCFFA35
-:100BA00023D9891FFDDE43FAEA789D9FD621B775C8
-:100BB0000EFC079EB755F1B7FCC8BEA77B6FBCAD56
-:100BC00063683E92CA3087BF07A61B12E2FB4896B5
-:100BD000CEF7637548871870B9AA2121BEEE15FEBD
-:100BE00028A3B349D6DFFF3D22E66B8EE3F1421224
-:100BF000CF199BFD323A584579A5F5407AC4DC8778
-:100C000035F9D9ECE7589664CBAB3E03FE3D9635FB
-:100C10007528FFBE20B7FCE11FD17E7D5EA17CD090
-:100C2000AF446FA7F757B75E4FCF6B5B6FA4E7C7B3
-:100C3000423FDF2A253E463EED6DFACD576E63F406
-:100C4000BA7CB787CE952DBDF54F77237F7A5BD9D8
-:100C5000BA63BBAF5FFF9DA9ECBB7B824CF66B57C1
-:100C600011CFE770AF9278BC5F77D7ED66CFE670B3
-:100C7000F544CD02D77F01C39B58310080000000AE
-:100C80001F8B080000000000000BE57D0B7814D5D9
-:100C9000F5F89D9DD94792DDCDEEE6B5900713C2DC
-:100CA000230AC44D202128D60D011A2B81A0A8515A
-:100CB000826C0884008104B4B2552C1B021830D613
-:100CC00068B562B57C8B85D6B6DA06A52D6D23DDB9
-:100CD000085AA81463B50A562020B5286A228FB294
-:100CE000B6B6FEEF39F74E7666B21B82EDEFFBF734
-:100CF000F7FDE2D71EEEDC3BF771DEF7DC7367EB46
-:100D0000EC5347390A09216EBB811411B2CA42FF64
-:100D10002D1372F1E8FDEE05C984C45BAD1EFA84A3
-:100D2000989AB21F32D0323920921D148809647EFD
-:100D3000C5580ACD0CBA1D122185000D081D00539F
-:100D400008B184054292A09DC7D368A56529401CBF
-:100D500000C3123E370942453B7DFF0BF8BB2E0214
-:100D600095FE2C619190F1309EFE7D133EDF249B19
-:100D7000CAE07D3189CD43793F9BBF9FCDE76309B1
-:100D800027B07924E9FBB1B3E722696CB7F69FC7B6
-:100D90007D89A5231D741D7576EF288084741B2B17
-:100DA0006C84DC61FDFD61218F428B35245248FC4F
-:100DB000C68FBA7309FE7D311CFEBFCAF1FE184210
-:100DC00004D22D7C41879EF9B9101A46F11757229B
-:100DD00006D765532838CA274CA0CD4A8C1EC06759
-:100DE000D78864DB70D5F8C50E01F1F7BAE4B0C15D
-:100DF0003C2BA68915C1B1D87DCA1CE8675A4DD1D4
-:100E000066369C85A412329FFD9BBC2E6F6F194ED7
-:100E1000EB0301A36724A5E37C4B2008F39B4FA4BD
-:100E200040B7059B085F080865A988BF47E73B7F77
-:100E3000AAE88DB36BDA912FE83CC97AB26F04ED62
-:100E4000FF0E810F10A065FADE315E3C3EF5DCCD71
-:100E5000B08C6EE2300DA7EDEFE8AE9E41F2B0CA65
-:100E60000AFCB488B79BEF379EEAEB97FEAF3AA037
-:100E70002D2F28CE7F859281E225583601F8EC0A85
-:100E800003F2594D8BB6DDA277AFFF80D8A15FE9A1
-:100E9000541FBE619EE461C66FD39A1D32C5D3381C
-:100EA000878C749F39F5BDA9849667117233F43B22
-:100EB0006BAAE808D1D6AD7E03F1D2891FF28A4130
-:100EC00081AEED506EF781EB006FC5467907AC350A
-:100ED000973C785332D48F77009E2BE0D9106C4F1B
-:100EE00008B4735B8223E9B32EEF7BD61A15DF1D9E
-:100EF0002A7EEF0A1FA5D75603A98BC64F8434E17B
-:100F0000BCF6DD138FFD1C7F54089AE9FCA7899F6E
-:100F1000FF61229D4FCD7D468F59C6651980AE3346
-:100F20003C4C1E09F15AA7517CDE4158F93D525103
-:100F300014A2E3D7E41F2D31D37E6A360828A70A0E
-:100F4000FE29BE4FAAF1E66BAC480CC98877CD7379
-:100F5000DA9909F899E2F9640C3C9F54E3D9FFEE61
-:100F60009171FB54ED363B6CC9C0E7A480147C4101
-:100F70005173814C4E1C4FFAAF5B8117D71E1EB7C1
-:100F80006F24218F12EFC3A87748B754318ED2490E
-:100F900022DE687A60BA9DC9C134F123A4CFD96238
-:100FA00051067C1DF27F68A51C460E7D2E96019E83
-:100FB0008997369A1479EF870E13E279AB89780115
-:100FC000CF5B875A824DB4ABCE7BAE4CEB46FAC8B2
-:100FD0008F4F063AFEDE4876C8B1E76BF38B6404A8
-:100FE00065CC72BF8050A1DF307F1C91C647DA0DFF
-:100FF00023D1E7BF1BE498B64F59430C321DD719D4
-:1010000020DE6014BE50DA2DB7F44E9708B60F39C3
-:10101000E9FC56C886A040D79B2FC88CBF8D8DDEBB
-:1010200074DA54EA981D4827300F11E721D3F949A3
-:10103000747ED9FE042C0FF72721CCF13B118EF0E2
-:10104000A763FD487F0EC251FE6C7C3EDA3F06CBA3
-:10105000B9FEF108AFF0E723BCD27F0DC231FE52DA
-:101060006C37D65F82709CFF067C9EE7BF09E15516
-:10107000FED9083DFEB9589FEFAF4158E0AFC6E733
-:10108000E3FDCBB03CC17F27960BFD2B1116F9EF8A
-:101090004538D1DF8CB0D8DF84ED26F91FC0F2D5FA
-:1010A000FE6F23BCC6FF30C2C9FE27B11E1410E07C
-:1010B000219ECBE303F242079514E07019F83896AD
-:1010C000DC5DE4F668BEC37B1CF84E696732109F96
-:1010D000BABDD2EE1CB71B4EA06B94FE3EE1F4FAF3
-:1010E000C473F23BA349846E2DEEA60A2246E8653E
-:1010F000DE55124AA7FF5CB17B3601BD40729335C5
-:101100007CDA5F3FB0F51DE3FA6BABD4E515817F68
-:101110001B8927401F954F785D807EB6C952593094
-:101120000ABF8D761AF1BD710EDFBFC05E25649FC8
-:10113000DA07FA6456C0F18729C02F63937F3F8591
-:10114000F6376CBD0146A0AAC4D13985EA1D792ABB
-:1011500041BDB88D1094A76DF15A7B3ACCC9F041CE
-:1011600048FBFEE1284F230A98FDE9BE1EE4CB743C
-:10117000CF70B2391BE42D2448B4BFC02A42762870
-:101180003603DA6F5CF003A88FF467C2750E6B212B
-:101190002F59E844B2DBE4297114E66CF1BE144720
-:1011A0005F1919F44D89A7E5D1CF045E0278457B1C
-:1011B000704A02856376875EA2E6948C0B754FB108
-:1011C000D2F255FBC95E406B7E975C6AA3E5F1875E
-:1011D000BD7B291B90C26E5FA95D86F9049BED74EF
-:1011E0003E5B8F114F132D177FD426261215FD4D10
-:1011F000C4B7534517DB84AEA949F49F197739F278
-:1012000045785FEA8E738EED4F9F6DB06E5827B5AF
-:10121000233BE8BA32BC21C1A1E2931B9C4C6F5125
-:101220003A5CE5043BB4A65782756E5BEFB221FDD4
-:10123000E21D253064EF34E2785A063E96104FA640
-:101240000DC351DE15BEA3F8BD62B64D8D3741D139
-:101250006B75ED6363E3F70627D37FFF2DF87DC73A
-:10126000C1E421167E2DC02B932E2DC755CE3E39BD
-:10127000AE74A6C46ED7C4F1AFC7F33603D94F6DB1
-:10128000151D97F229932B12A04DD770FEBE145E48
-:10129000EFFE2FE3DB9B9C03E395C8C9A82729BF7A
-:1012A0005E417262EB1BE82F9AFD7A80E351A5E75D
-:1012B0004CE02FB638A89ECB89ADE76E755E427FB5
-:1012C000713D63E27A5C196F0BE7EFFDF68AEF8000
-:1012D000DC58371802206725C4867241DCC99C4F50
-:1012E0001CF1C02733444709E81B329AA01F9D30E8
-:1012F0003618807DCAB0805C20423350CA80C7A1B6
-:10130000B9C1CDB4EB6CEA674894FEB4AB10408B26
-:10131000EC302CA0EB4E54E4CD51ED56CB9B62EF5C
-:1013200023F2A8F0856BDBE66CC6AFB3A9FFF236FB
-:10133000C753A41F01DB6DFCC6D06D9B557A709B13
-:10134000DB8D65A57D2CFEBDA0F0EFFA75C407F21C
-:101350003139BADFF0BA53E47CDBEB053E0F7C8514
-:1013600038C09F71AE3F89FAC949F59380FA898DDB
-:101370009FE18FFF418096BB9CA95C9F3BE26FB1D0
-:10138000FDFFE3E71D4EC2F4D46447A748EB875145
-:101390003B24839C4EA6739F00F83221DD65C2E892
-:1013A000284F2641F07B29DE4206D0BF065B10ECB9
-:1013B0008CC9D4E60579262627AE7FBFDD77DC39D8
-:1013C000805C3812E47C206AAF335C66A5FCB731E0
-:1013D000DB110FE58F69B9D54DC77575135E6EB119
-:1013E000A2FCD0BFA148C510DD1B807D54CA5E0B96
-:1013F000B41FDE570E40792BF82457D3FE1FFEDBB7
-:10140000FEF51431B39DDE4F9C8CAF7B017A47D340
-:101410000D6A4E849F2FE50F28F219912747BE22AF
-:101420004FD563511FFEDD5918E92F967FB38BEB23
-:10143000CF04D7C0FE8DC2F797EDDFF0F97EC6F579
-:10144000522CF98F3BF0C696EDB4BCCA2DCAA7A8A2
-:101450007F671BFA569744CB16EA6FBE47CB064B05
-:101460009704EDCAA9845A29BEBDD4C983FD8765F6
-:10147000022BC31FEC3FCEB609654C5FCB8973C608
-:101480000D84C720AE6795DB84E3C58D1C9108727F
-:1014900065E77C4524210876DC5EEC9016607FDDF4
-:1014A000E446DA5FAECBA0916BD05BCF8F05BDE495
-:1014B0009260BF6EB69080CD15E91FCA890511FDF7
-:1014C00044F83EEE4EBE676A5BE7491C01727A88BB
-:1014D000C551DABEC9E4B23C8304D7819EF012D96B
-:1014E00041DBC711E58F0A2E2D1B7969C6DF05E2A6
-:1014F000A5F33FF87711A13082846C74BF57EE11C9
-:1015000042B00F34192C41B0A525432DC40465BB4E
-:10151000216806F93829E03A4D050941507E538784
-:10152000162776D3759C3BB8D7EA8B42FF5B7DD5F7
-:101530009EA9E363E3B1AFDDBC971D80C727E5F546
-:101540000EF023036E09E30E9BA0A94AAFDFEA3237
-:1015500029FED06C17F8430B7BD79B80DED9C9E8F6
-:101560000F91112EE4DB21EE5D9B4AC064D533FF61
-:1015700074280936A9FD2A85BF8EB87C73A19F27E0
-:10158000B91DA162D9350AE2555724BBC02F2D6978
-:1015900018DA01FEEE136B8967A111F5C14C68EFF3
-:1015A0004D6ACF07FE7DD2B3EB470F013ECD745F8E
-:1015B0000C7A7CFC51AB4CE95555B83705D6F3078E
-:1015C000DDFCFBFC0FFF37112FFA7DF03217DD0732
-:1015D0008342CC2379B00F3EE7B9293184BC9514FE
-:1015E00055BEABFCF7623FCA7EF85D6328D3115548
-:1015F0000EB5F856C6AF12D8BE961805A6FFB81D90
-:10160000A5FAE53E58277D0DEDA6D72C3C0DF6E654
-:101610009C67BC07EC762C7DA3CC87E27164852D9A
-:101620004ABD402AA2E989C75DCC5E5719E97E818F
-:10163000D60B2B0B1B615E5536AB007CA7B46BE65B
-:10164000ED147E56E25562E2E785407F880F465BE7
-:10165000FF7C229D57C7A39A41D65218BE3C51FC2D
-:101660009558F83A6C6C2B87791D5E249226DACF58
-:1016700039DFC43412E57D05BE037C43E9B21CF6B4
-:10168000FC852A7A8E888EBFC36BEB3C538D117A12
-:10169000F6ABAF8EAB04FB5D0978548DBB9FE3E5E1
-:1016A000848BD97B62F6C90E5A6F5AF098838C03EB
-:1016B0003D75BE306083B858EFCF9B80DEF7D930E0
-:1016C0005E51597DA1B0699C0A9FC5048DE4FCBDA3
-:1016D0004F3864FABC72E4FA948035361E4FB8D89D
-:1016E000BA1E800793301EB3D77519F11832D6850C
-:1016F000FC46F6C67942108FFC93E801BF01C6F59F
-:10170000A1FE64F1E4BB1C6C5E713A3FAFD2BF42F4
-:10171000A35F12C2020926A9CA523BC66713C212AE
-:101720003ED7CBDB0E178F3B717953F01F8B9E0A90
-:10173000FEF5CF431CEF87AB97C8103734C547F78A
-:1017400083D392040D5FBDB5D6A719EFED7F8A9ABA
-:10175000FDB202CF73FA9EF34D4A837855A5293026
-:10176000723072AEE0E7ADCF1F7740BF719F99A393
-:10177000CADFC7DC3E517BDA72B3ACB2A7B789EBE4
-:1017800001EF0912D76F3AB9F3825DA5F8BC0EECF0
-:101790002A9D62C225ECEA7C12E88438B27E7CC5C0
-:1017A0009EEAF94BB1AF7ABA297CE04CD2EA4B25DC
-:1017B0006E184BBE14B93AC2E55F8F7F3DBCD5A40D
-:1017C000F57B14F87E1F3DE24880EAC73B4BC420FE
-:1017D00011903FD03E1E7E4C407F33546D46BB5C23
-:1017E000531D87F1D99A7C11EB6B1E14D17E86A80C
-:1017F0007EA8A7F3F903D713FAF86C09113C5355E7
-:10180000EB9E39214E53BE6DD1B7FFB016E2CBC56A
-:101810004619C63B24B37873C02BA2FF4AFBF08461
-:10182000203EFDE8B51EB0670A3F1CF28A286F8192
-:1018300037450F0CDBC5E3D1875AF28322D059F02C
-:10184000F58D23E740FF3532D0E1887B8B03F45DD3
-:10185000DC3F1FAFA8C0FDA34FCE47BB499D553A03
-:10186000EF382EA7A5438B6F013B7EBCD548206E79
-:10187000747CCD3994E7EEB58D9EA92323F16525BF
-:101880003EAC8F33EBE3CBFDE2CABA78B2C20F7A3B
-:101890003EB939067F28FA2A167F503D5695947234
-:1018A000F97A4CD11FEFF075960EDDF26013C54347
-:1018B000C24211F1A0F0E591CFEFFF1EE8E138CA76
-:1018C0001FEB809FFFF9C397611F42960851E3C841
-:1018D000DFEBB37B942EB911BADCE65BD25706F18D
-:1018E0009F5BB7B2AF0CEBD7DB95D87A6D60BD3597
-:1018F0002C89C581F476472F0FFF69BB5359FD58DA
-:101900002EBC5F59BD280870D3504B1DE85FBD9EAB
-:10191000D0DB09653EFA79268445121CAF9EB78C50
-:10192000ED2276C284F57E8B3D0F9CF58B710C0603
-:10193000C00904BFF4585CB019C76BBCAA02E7DF4A
-:101940003811A09F78BA03B03E773CC60FDA325800
-:101950007BF1FA78E68F4F70E13A45C5213FEFC43D
-:1019600072335FC35897EFD9243A8F66AF210ECEFA
-:10197000154A6DD20108B9B44D31103389E049F1EF
-:10198000DF094406E87AB14E807D67BEC59483FEC8
-:10199000E92EE4DB6FD27D21E5F78307C55DDBE847
-:1019A000120F7AC62746F3CF1538CFFD0DD40BB7EB
-:1019B000F86B101EFDFADB5920AF770BBEDFC2BCFF
-:1019C000BA2A6B1E2CA4F369D82DE2B9D2BCBB8F06
-:1019D0008C62FB34EDF9A468B7E4421CA55988F782
-:1019E000801E51F0D86933A17E693ECAF460F309C4
-:1019F0008197D93E621FAF3FF7AE0DF7190ADEE9B6
-:101A00007A0EC1F8DE6F3B713DCA3EE3DF58CF91DD
-:101A100081D793E1407D017C2546E62FDA245C578F
-:101A20000F89F7C0FCFD3C1E44DE8D43BF59A16FFA
-:101A300003E73F85BE2B387D7B3A2E7CEB1ADABE5E
-:101A4000CDEBC253063193E07A7BDE4D40FE50D69B
-:101A50004BF9E06398DFDE0E6627DA8ED918BE6C8C
-:101A600045B9303FC5BF7624313F59BFEE2ABE4F3E
-:101A70000F27097DFE2DC4297CAE29E1A428F2A000
-:101A8000F8B514CFFF80FA1207391F24113C2BE35D
-:101A900028E32AEF9993B5F255C5E30AEF1A4925D1
-:101AA000C41361DC02D5FC56BB4ACCC929FDC7FD75
-:101AB00037E8E84ABE0C3A3648D6162191F4ED8B49
-:101AC000319426F79773BD9C091D9D9FC1F9BC5E9B
-:101AD000FE2F1A1A8940FB5D2DFA0EBB286CF69179
-:101AE0006E734E7F79B8941EA1F4BE32B9B0BF3E7A
-:101AF000192C9D0B93FBD1B93079003ACBAE8A8972
-:101B0000500FEB4F2FC07DDE2428839E300DC7F190
-:101B1000902F7B9D24F8346D94C4E328CA7C202E3A
-:101B20001147DF2B4BCE46FA0B120918693929D71A
-:101B30002380DE1F041F94A9E7F71FE0839B06E6BE
-:101B40008310FA25CB39BD972B7916BB06CEB31877
-:101B500004DDAA61DC8B064FAF2FFBF2E956DF9F55
-:101B60006EF503D3CDD700F2D36C22E7D10F2FAEA1
-:101B700076C378FBEDDE9389F4F99E26AE4FB22949
-:101B8000DD68FDCBC922EAAB47C895A887BF6230A4
-:101B9000E0FC7BA8FE7D3A3B1ADF0724177DFFE2BD
-:101BA0008D04CFE3E8FABE998CFE4F4080E7ABE7A7
-:101BB00013033C77CB4DC470197A6813D713AA75F9
-:101BC0006E52EB81287AA815EA293FDE05FC689160
-:101BD0001DD2407A68CBE5EBA12DFF613DF4FD817C
-:101BE000F9EFB2F9EA598677AD3E50F858D917C4E3
-:101BF000CA17A2F248D25DFDC725C483E7612576E6
-:101C00000BB3BB3B05B4B3CD27F27D58B659502971
-:101C10002876F8EC2E562F4E89EE0FFE3CD985FC27
-:101C2000BBBC7DA547D2E48104F0F943DEB38E113D
-:101C3000542F4E17ADB8BEA472163F54D64FF5ECD4
-:101C40008C69A93C6E4AD79394C9F09044FD013841
-:101C500047B3F3FD4162B1A4F1FB15BCAD162B04F3
-:101C6000887B3B9309A4DD50BF7ECD6838BF777A6F
-:101C7000B5ED5348EBA7220E42501E5CD47E431CA8
-:101C80002BA94CD70EF62179D05EF53CBBFF7EE246
-:101C90007832DF4F98881BEC0A11AB06E41BD57E27
-:101CA000E2FDE441EC273E4A56CEC7B5F6AB3D8E89
-:101CB000448D0BDC93C2F71FE79DE8FF8ADC6E4D75
-:101CC000EDCEC6FC94553619E305A2E8B1CCC8EEBA
-:101CD000FFBED36B20B26A7D4965F14456ED1F52B9
-:101CE0002A5C9A725AE5504DFB21BEE19AFAF4BA89
-:101CF0002B35F5998D059AF230FFD59AF6D9540017
-:101D0000D4E59C96AF69DA8F6CBB51531EBDE57666
-:101D10004DFB2B820B34F5639E59AAA91FD7BE4AEF
-:101D200053BE6AF73D9AF6CD3CEEABC7CBB51CAFC0
-:101D3000CD12D33B4DD6028C47365BB5F1C8B414F7
-:101D4000A67F4A1227E7421CBCF9647E2EE07B9FE7
-:101D5000FD6A8C8BC7E20BBD1E8BA53FF5CF8BF8C0
-:101D6000789FBC6432801CACD84BE5F52A5AB6BECD
-:101D7000B311D6D432969DA74A84E5F728E72BCA3B
-:101D8000FB7DE72B9287C557ED56B2390A5FA4A5B4
-:101D9000C851E39F0A1FC5C2DB3D83C4DB5778BB34
-:101DA0007F176FEF0AA4523D8F2A7E9EAD7F6F751D
-:101DB0008A819F07FB2A5398BF33211E3D7107CAB2
-:101DC000E3E5EA7F651E54FFD7A4A480FE7F63DEAF
-:101DD0006AD0FFBBCC1ED8937D52F946EDE332B4F6
-:101DE000AF65ED0D9E5CA04BACF8F7EA947EF1EF89
-:101DF0003A16FF8ED7E06D514AF4F877B3FDEF182D
-:101E0000FF6E3679720713FF5E043A2305E8C0F8C7
-:101E1000A38FBE3C7E1E6B1FE427E48000FB1EAB3D
-:101E200024C339D7A5F6B5743F9B0BE7A96DB06FF6
-:101E300052ED73E8FE96EF6FE2D02E50BBD79A8238
-:101E4000FA911C90E9F38B74DFBB5986A262FFBC48
-:101E50001ABFDC4C3C169388F47C04E849BE49EE7A
-:101E60008A13215E163A3839FBDFB2E7DF4BB90C33
-:101E70007B4E2E7D2E8776A79CAE7F5D14BF4B7F59
-:101E80000ED7E77F839F26E0791CE26903B58B704C
-:101E90001ED799C2ECF386A36C9FBCE1C46C37CA11
-:101EA0004D4AD180E77083D537BF4DE9E797FE36BD
-:101EB0006500BF5459FF2ABEEF9D268E6D8778E3DB
-:101EC000D9B009F12612961FD9B0DF4882484F9643
-:101ED00067ACD0D118DED805F6D948F479C572229E
-:101EE000ACDBB85F44FD4492597D80589AC0CF491D
-:101EF0002CD6DA2DA7576BB792CA5C3A3BA6B55BD6
-:101F000069955ABB35C4A7B55BE975053A3BA6B5DB
-:101F10005BC3FC5374764C6BB7725A6ED4D931AD37
-:101F2000DD1ABD456BB7AE086AEDD6986756E9EC89
-:101F300098D66E5DB57B9DA63E3FB459533F7EFF5C
-:101F4000239A7261D77735ED171F7801F36F261E3C
-:101F50007E5AD36E52F78F35ED28C2BB204F7B21BE
-:101F60009284906B4E3FAFA95FC8FDB46B7B7FAD91
-:101F7000E987B4B17CEB00FD0FE8F557E2338173DC
-:101F80002291DE57D2295D5704054F88365BB27B1C
-:101F90006711CCE3CCB1EBF7433F8BB768F3B49751
-:101FA00004B5E506323C11F44303E58B20E5936567
-:101FB00090BFADD26BCB48A31DF32106C9678B0F31
-:101FC000DC4430EF33E0ED82FC74659D0ABF793963
-:101FD000BF29F353D6BB8CFA7D2139B24E2FFD8F2A
-:101FE000ED23BB4DC0B7B5BB05F25DA1FF7AEA3A60
-:101FF0001EDE981E655DFA75E8FDCEBC546D1C7B37
-:102000009A68C5B8FED937450F8B0F6AE570D501C0
-:1020100016CF5FF59C80F1353D3E14BF34165EC48B
-:1020200000DB273424936050257F32C787D9AD95D4
-:10203000BFB3F00F98CF536210F282E2E4783DBF55
-:102040001585487F3C27E46AE5548F679B67685491
-:10205000BE92E97F308F5AC2CEA5F47CA5C7FB8A19
-:10206000DD0F9B402F5E2EDEE7A56ACF0795F38339
-:1020700012BA5A53943C3805AF745F5E935A187B7A
-:10208000DFDA907AD9FBD686D4FFECBEF59ED40178
-:10209000EC5C0FC4CBA85FA98F97F58F8FEDFD4C3B
-:1020A000B0631C9AC5BF7C1E0BCB57D1D9C95CB796
-:1020B000C64EF6ED7B4F0AC166DAF912BB7713CC38
-:1020C00067A9DDBB196099DDFB807ABDCD142F783F
-:1020D0003F87DAA99D51FCC3975315BFA802E3229D
-:1020E0001B4A587B7DBB9FA5B2FB3C9D29456EF4E6
-:1020F0003B4FE433FB692B1AD0EF7C889FE73C0011
-:10210000E7852323793C0FF273152A765EA0DB0660
-:1021100063855B9DE7FB48AA13C7B34F7ABE0BF2FA
-:102120009D9B1D06872083FF6CC073D1F55E6BD924
-:10213000AEB1ECBD64CD7B12DA6111F00DFEBC5581
-:10214000FABB9A6F5FA6B884FA58EB7C3995F9BB55
-:1021500046E2B580DE55CE738D27F32DA06F25C1E5
-:10216000E38896C769E4795253F879AEE860E7BB33
-:102170007D727E893CA97ABB6F9F9A6ECAB9EE1CAC
-:10218000BBF765A0AB5F0A98C1BFF45BA2EF7F5FAE
-:102190004D65FE470B5F1F7534918F707C7150F158
-:1021A000933753312E17C07CC5D5A2E734C4E70658
-:1021B0001BAF3A9EDACFFF399E3A70DCFC64229C5A
-:1021C0004F240E95703B21797281FF5BE0DF9330E5
-:1021D000BEFA3EBCDF2FFF5476F17C5A79C07C5AA0
-:1021E000A59FD94EEFC78057DA5F4F2ACBFB5B2FF5
-:1021F000AAFAB15FA21F8AA7DC46EBA0F0F739C3A9
-:102200009FE7340B265C5E5CD39CD62FDE674E1BAB
-:1022100020DE77F1E8E844384F56E256FA76167F2A
-:102220005286FA7E4C8B533BFEC6025676A531BAD7
-:102230002D4E647C3F8ACF43C90354E2D69619C41D
-:102240000BF71D1EE1F9D94A3FA3D26CD83ED13518
-:102250006514CC7763B680FBCA8D4E41B3BF3C9901
-:102260005A322A8DB69379FFA3D2189F6E1BCEE205
-:1022700033FA3CC833BCFD99D42908E99B57003E8A
-:102280004DA218158F63D2581EC64988911546E293
-:1022900067358FB1FB5D4ADC4C890312E2792B81F3
-:1022A000EA95F75A8D04E25A8B44EB46E0C3BEFB35
-:1022B00073FC5CDD41FF037B593DB602F38FFEDD0D
-:1022C000FB5B80CF04577F7B599AD6E7A7782EF324
-:1022D0001ED7D7D22EE3BCBD3B9EF16DAFCD8AF1A8
-:1022E0006C7DBB859C3EAD3C4E01FA1AEC864B24BE
-:1022F0008DD1ECC7C234C637178F9ABDE8C794C5D5
-:10230000633E8772FE2149C01B98061E0068F1A734
-:1023100067C07DA2BEF30F99E07B49562BBE27C94B
-:102320002464832BA1924780FCB26E53F7863498C5
-:10233000EFB58207EE0FA455393AD392E11EA18C76
-:1023400062B6319BD88BA13EDF80F5CE398E8D46AB
-:10235000C8BB96099C6413231DC746C7694DCBC6ED
-:10236000F5B7066EEA4CA3ED12E55E327C2CE8115F
-:10237000C77437C87125CB5FD7AFEF3E2E1FD60D80
-:1023800074DF00F890A3E781DFC7F98FEA99354041
-:102390008F1299EC62F7A2581E2AA45963BEA08737
-:1023A000E54B2740BE510ED33350FF90B3741DF060
-:1023B000B9225F22C737F0BD3A1FBE95E33B4927DC
-:1023C0009F0A3EE9004D900F21CD20C8D7B3AAA2A5
-:1023D000CFF7879CCECBED158FC07C674D6EC23C8E
-:1023E00077F2F9175F8845E0F43239A1EF1388439B
-:1023F000C42533FD1B27CBA88F8943C03C538BECEE
-:10240000A983729CF56A870876CFCCCF0B171A8800
-:1024100044E5AD94F7E3AD24C2FBB92CCECAF4ABCE
-:1024200044DE57E442E4C82902FBC9FEA85FD49AFF
-:1024300040D7536A3D88E78871231A4BE05EC1CBD1
-:10244000F3591F8FC4C8DB3F99C8E8E0127D6E03C3
-:10245000F8F4E4E4ABFB26239DAF841B9A0F6C7861
-:10246000F7D5FD993C7E0EF9E281775FF55ABF7C86
-:102470007EF9BEC7DF7D15F2CBBF3CFF7B04D0E306
-:10248000272963C1BCF5FCAFE8B3C3A2EFF0BD14CC
-:10249000FF3753A6F21700944815D29BE50FCDE104
-:1024A000780EFC9DE2D912C1F3CD1D07107F878DF8
-:1024B00074DE747CE314866AE33D893C1F2388FD47
-:1024C000DF62699B06FE4D8FA9370FC6ED79F1EDEE
-:1024D000CC00D52747EF3B672394FF8E4BBD367862
-:1024E0007E7ACD1B36C0D7D13522DE7FC37BC9AA09
-:1024F0007CA0F7395F95BA2B8E025FCD5FFBCF22B0
-:10250000B59F4DFC296877970445B8E3DBA7FF9694
-:102510003D93C0998E9597B72769CA8A3D5E6E8EA6
-:102520007E4F3CDDCDE8BEE4D96D26C8872F75FB14
-:102530007A409E4EF37C83D3BB6CB8BF52E6B3E0C7
-:10254000D97C13EC278F77984908F85EEA32128C11
-:1025500053796708946F7D9C0FF5F37C654F02F605
-:10256000B7E83111E348D5742C3FC5ABAF6309DB45
-:10257000DFEAD6B1E8A83C1DF4D5A24D0209C8ACEB
-:10258000FD1A4A379FFF7E3C5FD1AF536F5F2E909D
-:102590003526D0237AFBB290785A2683DD6AD33E63
-:1025A0005FDCF100F6BBF812E7314E37DF9F159183
-:1025B000895FE4409C7938E60BC6B237A7D732A1D1
-:1025C000FC70AD05E1476B1D088FA631BE5DB6BB43
-:1025D000F3957414EBAE22B04371074A2DB793887C
-:1025E000FF2C6DBB29F4A40C7CA9CD87ACE27856F6
-:1025F000FCE7C5FC9EC1A5FCE72A58E700F9905509
-:1026000083CC873CBB7FBC059E8F57F03191E203A2
-:10261000EDEFD8D7647269FB1B0B2FB1DE5B0EDFC9
-:1026200039888267456E8E723BB270FBEC8D43E950
-:10263000049A5FFC6B5637F2258B4328E754A27B44
-:102640006317AC5F24BAF85F80BC4954FCABE7CF9A
-:10265000C5C4C3EC8E95BD67E171893EBEEC7810B0
-:10266000F1AAF011DC2830B80186DC86E2FEDF0D2D
-:10267000E8F77D80366DF913637716E88DC5BA7873
-:10268000C12742F4FDD734F770B67ED93B1DF22244
-:1026900016918A8D2CAEDE86F8392DB5BD722FC805
-:1026A000F376264FCB7FF9DC2F404F2DFDD9637693
-:1026B000D0531F486DA9305EFD8E0D762FE82B2973
-:1026C0006087F73F088A51EFEB06DDFC1C9078AD80
-:1026D0009017B602590C042C3013F4E4DF76181D61
-:1026E00010476D78C61C32537CACD8C5F048CB2758
-:1026F00058F97EC457C36EAD1C2EFDE163A932EEBE
-:10270000E703E91C7FE9A0AA576C3762FEE88A3725
-:10271000450F0CD3407A717DFAF7611E614AB78686
-:1027200076B1DA94D8BF9E7A3C2690B3865D8C4E03
-:102730000D3A3FB38EEB653DBFB7E9F89CE205E388
-:10274000614A3E2B0932FDDCFCA3C7F34ED0797DF4
-:10275000B4FD55BB3036C2EF04B22E291DCEB6D71C
-:10276000CC873C83587CFE09978B3EBDCFED8CBC5B
-:102770009B4E0C7CFF0E06EB8D21FB35141FF5DB09
-:102780008C9E007D5CFF9CE8B5829F74C48CDF77D3
-:1027900058F6DCCB6F5D4DE7B76CA73179065B86E9
-:1027A00015F4B342A706E0EF82085D96BEF0B209C9
-:1027B000F220E1F91A57843ECB76769A20AF528FF9
-:1027C000C7D2F64E13932F1D9DDA4F4C07BBDCFC8E
-:1027D000A38B26E0830FF608045C48FDFB75DB5EE7
-:1027E000B683FE003C81FD50E8D547BF7E740BCD1B
-:1027F000FCF5046CE780739A58F45B09732944FE76
-:10280000FEE9AFE9F875EF983DB0FEBA9FDE698743
-:1028100075FC556A647CFEBD0DA9608FEB8C8154FC
-:102820000742F6BC6EEBD791FF16BFFEF554827AD5
-:10283000D33B04E497AE7308AC6FD15337E3FA6A25
-:10284000890FF9AFEE7B6205F88917245216CDCFB8
-:102850001F3284C9C95F9F36E3A6E0AF26C2BEC35C
-:10286000F14791E5F19195E8877C9DAF956A622CDF
-:102870005FB0303A7DCCED33E17AAC81B76AD87E77
-:102880003FEAB10F33BD6920EF140FDA78EAEBD3DA
-:10289000D2B8FEC3EFA5E07B94EF4AE139B4EF3242
-:1028A0007AE3F234EFF1BC5636FE5D7C7C3AEF7889
-:1028B00088CBFD3555BB7F55E05787287130D24511
-:1028C000D4FC154BEEB76F42BE3AFF26D32B2B82BA
-:1028D000B3CBB0BECB184A83FA60E71C01F502F512
-:1028E0002FA2C9F57623976B6D3D9DA724A8F1BB58
-:1028F00087DD8BAB7D94B653F92111BE31459E67C0
-:1029000047E453C9AF58ACF3CF14A8D70B4943B42D
-:102910007A41799F3C9512F51E56441F0490AEF5FE
-:10292000C6E00FBE0B727CC48CF70CEB9F33E2F752
-:1029300072CE3CBBF7ADDB29BF9F6957E457AB674D
-:10294000F5F25BF7FCCD249AFC9E49AE2051E59749
-:102950003E8F2ABFC92C7FFF7F5ACF2E8EA167AF33
-:102960001DD2CF9F48BC86163FFCF1B261B8CFD2D2
-:10297000E155C1A75E6FBEE596A3EA4DFAF7265171
-:10298000E151C19FC2974B7FB21CC7E9E35F853F0E
-:1029900015FEEDE34FFD7AB578D4D71BE0CE51613B
-:1029A00084EEC675747F0DE7AE2F8A78EEDA23F7D2
-:1029B000DA5D1097E579373D0E5E76B2726F8A69FF
-:1029C00023E80FE5796F1CCB43E8A9E8B53B557EBA
-:1029D000FD890ED10E79F5DDC1E8F912984901F1B2
-:1029E0008C18F914CAFDD969A235CB0FFBB2367623
-:1029F000DEB3B0E9563BF8D33D1D39B32AC18F3F52
-:102A000020A24FD513CFF3AB025E6908C56B0D5BF7
-:102A100032394D02DF013FBBA663D90CD8342E6C8E
-:102A2000D5E2A3D63A07CFB36A1F3546F88280BFF6
-:102A30001334819F55F794F6F952C8AB02FAE8F8BF
-:102A4000C8077C14E51EC646858FF2493EDB27F396
-:102A5000F32AAED7A68963675542FEE27E764FE23F
-:102A60006C874836C27A9FE5E7578114E4CF159406
-:102A70008FD571CE8F80CF46C7B6DF1FFDFC68D1E2
-:102A8000BDB449FD2FFE9CF724851FFDE2C8A8DFD9
-:102A900040F9976F67FD99F46F5FBAE7B33B308FEA
-:102AA000728F99C0BEA867CFEFB2EE85F2AFCD1E90
-:102AB0009867CF3AB63F0EECB1A15DEFC964FE5FF7
-:102AC000F38B17F3BAD13EAD477AED1CC2EEA99E47
-:102AD000EDF8C73101F2E93AE8AAC0EEF27D57C33A
-:102AE000AFE3707FDDF3E245CDBEF2DF5DCF0A7E5E
-:102AF0005FA9C7462AE17E718F93DDEF6CF8CDA404
-:102B0000EFC37DC5E5BB3A4D35B4BEF4B7FFCC038A
-:102B10007DD3F33CF327A87FBB155CEA8E275E6D5F
-:102B20003552FA7D023EDF50BAEFFE6E4239DCC309
-:102B3000E88F1786871E8A075817C54B1DE8C958A6
-:102B4000F8786308BB3FF2DF878F4FEF80F1EB3BF4
-:102B5000261288A747F02278D9731BE65DD0F5B31B
-:102B6000E77B2EE6817F74A9F57EFA7F6CBD8943F1
-:102B7000FFBBF9FDF12132CE4FCFF7FDF9FA977780
-:102B800063F9A7360FCE7790F27ED5D0FF5BF42E97
-:102B9000FF5F4BEF039CDE36079CA7F4BCF8CF2CFD
-:102BA0007219EBAEFF5FBAEE3E3FC7E0B14CA0F347
-:102BB0007B87046F2E1162E7713E3154BB8F98C939
-:102BC000FD8899C9B5E83FCCF4B2F84A3329D80F4B
-:102BD000F7D4025E11CF1D309986E2A16B4E7E10B4
-:102BE000F3B6A4C0C8EF401ED72DCB3DEC3B5FDA57
-:102BF000FDD5CCD4B232F0DF0E35D179D176876CE9
-:102C00000647335DC22CAF88FE1E85E8E7FD69CA22
-:102C10000D981732AB58BBCFB85DB76FB8B5525BE4
-:102C20007F0B793A05F2EF6EA93362BED0CDBAF6CA
-:102C3000AB873A709DB792C60D2C3E7379783AC037
-:102C4000F1D41F0F03E3AD1F9EF87E127379E4FEEB
-:102C50007833FBD8FED24C2BB8BFC5F3E4560D0A2F
-:102C60009F84EF3BCD7C6805BF662FFB5EA7AA5F04
-:102C7000C48B82F7CBC5B742273DDE15FC2A78D33B
-:102C8000D3E12938934889E03F02953C121F51E770
-:102C90005BCEECF31BAD88C7D7B6B3FB0AAF15D735
-:102CA000B4E643F95901FDB50B93C7130B5DEF2152
-:102CB00023D9CDEE7F79654751249F4528FE1D9E7F
-:102CC0002B403EA17A5F0AF984EA75413EA1BA0C15
-:102CD000F984EAF6904FA8AE877C42753DE413AACA
-:102CE000CB904FA86E0FF984EA32E413AADB433E7F
-:102CF000A1BA0CF984EAF6904FA8AE877C42753DE4
-:102D0000E413AACB904FA86E0FF984EA7AC827542F
-:102D1000D7433EA1BA0CF984EAF69047A8AE873CA7
-:102D200042753DE40DAACB902FA86E7F5DF8254D2E
-:102D3000B984BCAA695F6A7943539EE6F8B3A6FDDD
-:102D400057DDEF69EAAF97CF68EA15FADF907B4E5F
-:102D5000F31CCE2C0245B08F617FE59E7F68FA910F
-:102D60004805C6994DA411A105E2B714C69376840F
-:102D7000562AE6004B47F972D2815FB706360273D6
-:102D80001D9A74310BF4FF6B936F62F1077E4E3026
-:102D90000BFE2953264EF83C03F6B5CAB9A73D2CC5
-:102DA00092D078CA876101A1239C404249940FC305
-:102DB00071085DE1247C9E1476224C0EA7E3F39407
-:102DC000F01084A9E11C8469E16C84EEF01884435E
-:102DD000C257201C1A1E8FEFA587F3116684AFC15E
-:102DE000E799E14908B3C2A5F87C58B804A11CBE14
-:102DF000016176F87A84C3C33761BB9CF06C84238D
-:102E0000C273F1F9C8F06D0847856B108E0E572319
-:102E1000CC0D2F4378457809C22BC377E27B63C280
-:102E20002B118E0DDF8BCFC785BF81302FDC8CF04F
-:102E3000AA7013424FF8016C971FDE84B020FC6D1E
-:102E40007C3E3EFC30C209E127F17961F8098445F6
-:102E5000E1EF239C18DE86B038FC138493C23F4216
-:102E60007875F8057CEF9AF04E8493C3BFC1E7D71D
-:102E7000867F85F02BE1BDF8FCBA7027426FF855CC
-:102E80007C5E123E80704AF80D7C5E1A7E1DE1D495
-:102E9000F09FF1F9B4F01184D3C3EF21FC6AF80478
-:102EA000C2B2F01984D7873F40F8B5F0397CEF867D
-:102EB000F0A7086784FF81CFCBC39F21ECDBEF4FE6
-:102EC0008E752FD167F802F6CF56D7A0BEF345C84E
-:102ED00016CDB9D4E30976D493B3D6B03C928D2500
-:102EE000E7A6A25FBBD22CF3EF6BEAF4EAE756F059
-:102EF0001F3640CD10D607E401CEE3FCFB5AF1DECD
-:102F000014F097361674D7433CE4C1ECEE2A84E9FA
-:102F10002CBEBA9EC307D259BCF4F651CCCE56ADE6
-:102F20001C89E757247970EBF803D8E79448FBFA3B
-:102F30004C5EB6F666E1BD8041F633D87697CA8F0F
-:102F40005A95EE0BA6A35FA4BF9F37E8F79F413DBC
-:102F5000F1E5DF6F1FE8FDE39C5EF68C8A5D384F7C
-:102F6000C99B07F553D60D1193693FD5AD8203EC8C
-:102F700064CDFAFCE940BF02E2C578E2BC18795D95
-:102F800047D2599EC682462381B8E20299603C77B7
-:102F9000C12E96E70B71D072CA17759C2F966FDA07
-:102FA000690217B4AE7131CB3F0AB2389385FE0780
-:102FB000FCBCB47536E61F2D7B461B7FAA87B88EF6
-:102FC00008E7C8DAE70D3CCEA48F57EAE34B7F4C05
-:102FD000E7F1250FCB3B226206AEF7025D2FE473CB
-:102FE000F8EEB65940FF533CE03989B27E255EA920
-:102FF000E081F4BFCF8079A167F78FC43CB5B3B24D
-:103000009C06ED7C549CBAAC90FFE09B08CF29FE57
-:10301000309FA4B72901F3914E507D2E43E293C314
-:103020003711BE9FD6FD4E26E1DF6FD49E1B585A46
-:1030300031FFBADA4807A6EDAA7724E1FD47DA5F47
-:10304000DE6E8847EE30623E5080AC7293E2FEE75F
-:103050000A151B8CC81F0B763B597E58C0FB26E413
-:10306000EB2BF438B13E673AE4152D68C9CEC7B0F2
-:10307000DB6E23FA79CA79A942A7FE79D11589F0C6
-:103080007DC4A52DAF233D29BD34F5F5AD9FE2FDEF
-:10309000014AAF5331E8756A207A5932B4F482B8E4
-:1030A000F2AD50B92609E5B46A5D6864A38A1FF5DC
-:1030B000717A9261C5FB8E4A3E71D950460F2279D2
-:1030C0005281AEE75A0B915E7A3A95FDAB06E94123
-:1030D000DEB1E1F776E7E590F937D2E7F379DC7214
-:1030E0005EF3F5E83F676730BFFEB5B5906B49C842
-:1030F000EB6B2DC44B9DE737D63AB0FCA7B56E2CD1
-:10310000BFBD564678646D2EC2532696CFA3C81312
-:103110006500CCAB1B9DC1E4687486B2AFBACB0D21
-:1031200071E9B27FBD5108F93D2981E499D3AE45DB
-:10313000BF5B93A75139479B87D16DE4795E9B04B0
-:103140000F7C476541C5359AF624777CA40CF6833D
-:10315000E78D2C6871E2F7DB6E9B91A4697F4B4B86
-:10316000BAA67C5D868CF39B5D96A3797E7BD51891
-:103170004DB99AFF6E02B1C41BD4E753D4336279C0
-:10318000DE0ED6F67CE3C4B4D574FCF3078D58AFDD
-:10319000A7C7295300F7E381A7CD1EB043A7E11EBF
-:1031A000192D9FFE9388FAEEB491041C54759F1656
-:1031B000C87A804462F274E13093A7B27F8904F642
-:1031C000E1E4C7663CBFABD9229000DCA1EAA59838
-:1031D000A7E3DEF52333AE7BE11691F8F0BE92DC77
-:1031E0000EE7D677ED18ED8173CB7939A14CB8B7DE
-:1031F000D7FBF338CFD3B4B6A69BBD7F9AEEAF9D75
-:1032000090972414E0F9C1C7E56DB506C837100FD3
-:10321000A6809C7EFCBC88F194252BFF54E400BD65
-:10322000F64AFB5BC5749C536D228E7BE619F33620
-:1032300011E5DD9B06DF758DAC3B8871867DEE8ADE
-:10324000BA0CCAC71FD606F350EFAC61F1EDFEF819
-:10325000A1EB057A03BFAAF458C46EB17332AA7CFD
-:1032600086807EA8317AF0DCF454AB11CFF3A8FE4F
-:10327000C7F3FF536D4906A67F9E47BE5B20C92654
-:10328000F5B80B5A452FFB5D08D904F3250F8B3E8B
-:103290003211CA2C5F21D022F8D8798D96BE77AE34
-:1032A0009C88F78BF5F9530AFC84CA944F750EB4C9
-:1032B000F445763E4B26744BEAFC7125BE42DCACED
-:1032C0007FE53B3EF5C31FFFD6640ACF7AD92707B7
-:1032D0002F6CB7A17EFCC8F052D16A0ACF9407DEEA
-:1032E00097285D1A45DFA380CF6586D6AD029E8BF9
-:1032F000BCF72D388FFFF039A307C590E76B2DFD84
-:10330000F1926103E507C10CD8F972285570C357D3
-:103310007909E66FCC25ED3C3E1064E75830098A08
-:103320001F473D3BC77AAFD0B619EEE1D6E8EEEDC8
-:10333000BEC7EF2DFC3043D0D8E7BFF0728D81C9F6
-:1033400027D9C3BEBF08792F2354F654D1A7BFC8CD
-:10335000188EE3F6D955D28E7AA5967F1FB8FE193E
-:1033600033BBA7231307C8E312461E7216E4998ED7
-:10337000B3D4F4DC77809D17932EB4731F1A83B5F2
-:103380005DD9F0FEB6F52E7CDFE80982FC723B6069
-:10339000A18A03F4C762C2E6B7BC4D088654710A1D
-:1033A000E5F73808D80595BEE96F0FB4766011B718
-:1033B000778B882EDFA74D6B972A126CB8AEA56D60
-:1033C0003CEFB96F5E22F982E2ACD6177C6526CE5F
-:1033D0005BF004A3CC6331E90DC17780973FCBEE5E
-:1033E00003E9E7A55FC760E759EB993D15BE27DC08
-:1033F00037AE6EDE0ABE095C5052D141C17B6D8092
-:10340000E1B3B643407AFD85FB55CA3D3B85EE8B63
-:1034100049C54CD06B8B1FA5FBC2EC081FF4D9EB40
-:103420009D41F497CE9036BB95F27FFD969DB74CAB
-:1034300082F79E7ADD04FC5DE50A8D3438E1276968
-:10344000EEF956596614FBAEB3E7FF29FC101E6770
-:10345000C2F7283E166D1731AF41D58E9FEF07108A
-:103460004F7501827944756F8A9E66FAB40E7ECEDE
-:10347000A7E0F2E7ABE0E77F7ADE7A3F263B7360B6
-:103480003F46AF5FFAF9313AFB09F726C05EF6A670
-:10349000B03CF0F39237D1857A59A777530AF0BB45
-:1034A000A38ADEADE5764F196711D83B5A7E7FCBF4
-:1034B0000B76883FFCE5D11752318F02ECCBD888D0
-:1034C0007DB9BB868D77F72FE3306FE9E3F2AE3C31
-:1034D000F0FBAABEF73BBBFABBA6756EDF75993051
-:1034E0005F6E0F978BDBB21C600FFDD1F32AFAEDF4
-:1034F000BF62ADD3768975DAB4EB5C00EB54DD07BF
-:10350000A9E1EB3CD9C2D6F75E2B5BEFC27EEB0C98
-:10351000E039C8DDDF377B02E86784D08E9FDE2983
-:1035200012B87FD6E767E8ECFE05D2B615F0B17C9D
-:10353000D5DBC724CA174B4651FC503EA87AD88C1D
-:10354000767EC9CFD9F9E78742491A1EC0EF0BD959
-:10355000BF419F2FA5FE01F8179179F4D9FDC599B8
-:10356000852ABB3F48FCADE071A8151DBFC3DF8BAA
-:1035700012BC2C1F7285F21D98DDBAEFC0C8A003E3
-:10358000D83D790BD02983C86C9FA88DA7FE6DE428
-:10359000A777AC42FEEF1DA5FE5E6F437CC808F91D
-:1035A000BEBD3B05F48B96DF55622F2190DFCAE24A
-:1035B00060EB3399FD12BC5ECC7B3153BAC6D3F1BC
-:1035C000EECF94D973D9C1F2BA9F22F8DD1965BE46
-:1035D000FAE7101FB780FDB31AD0FEE9D7FF8B4C76
-:1035E000E62F2F170DE84FD79B985FDDC3BFFBF089
-:1035F00028AF7F3493F9D7DFE5F1811EF023E17C1A
-:10360000FA5A33FE5E0F2153314E2E11C67F92823D
-:103610003787F4499F7CA3BFDC9B0178BA83741978
-:10362000819E338B67CB706FE058AA05BFA344FF20
-:103630002AA09FB9BC9F4346764FE0188C41D735EE
-:1036400097C7938FC16740E9F8C78698D08F0DBCA4
-:1036500068463FE1FE7816EF23C98912F0F9ED5C68
-:103660004FCD9B6CF6C2F9C0DCC9F75700A4FD052D
-:1036700008C55795A577433E1DA7C9C0EC7C938B21
-:10368000E07D49B2BEBB10F07715758B214F9EAE21
-:103690007ED7174903F191F69E423DC415AE268CA4
-:1036A000C18A11BF9A72BD89D51FCC3C36F3D10CAB
-:1036B000BABF866C26B0338023E08BEA44DCE7CEC9
-:1036C000823C7E174009F9ED4689040C0CB658F18E
-:1036D0003B442CAF5F3907B9B9988412E9FA420725
-:1036E000B4F7286E0D1942A3E17C470A7502FE0C5F
-:1036F00016D9E8A0E35494090580F7FA75839BEF87
-:10370000F1CC0F70BEF5F0BD2B98E73704CCE799EC
-:103710004B851EF8F40E89EC130B18FD800F1B5C13
-:103720007200DBAD647CAEDCDF50E8924FBB57E348
-:10373000772E9F1FEDA7C50EEF9BA2C74DCE70F948
-:1037400050FCB4655C6E97297CF7AC565E6D5932BF
-:10375000FB9E1AF883146F73398CC5F7F159ACFFCF
-:10376000F82C165FFBDB658EB7DC4C42B8EE17CD4C
-:10377000484765DC591C5AB258FEB2320F857F6B40
-:103780004923E6DFD4F2788C816A12CCD36DFB3EFC
-:10379000E6F7EBF384A8838479674BB7EB9FABE242
-:1037A00039A2462F619C5330F52E84F9095F89F3C5
-:1037B00000BFCF35B5633C40DFCED826A09C1B5B55
-:1037C000A83F25F0F32D5A36B70AF8FB0E73337A6B
-:1037D000C7E1F7CAB95F5DCBE94AB5F774B80754DA
-:1037E0000BFE149E7FF1EF446D617EA4C4FDDF05E6
-:1037F000AD5A3F63EE7A959FC980E65EBD59971F2B
-:103800006EE4FEC67153EF38D0F7FA7BF6C70D6C45
-:10381000FE815482F991CA3D7B89FB930A3F0DC911
-:10382000326ACEC594FB9C55A0A7D8F70E74F95404
-:1038300056FCEE4A95C0BF57C9E38A67A9BF89DF26
-:1038400095391A87764B8933F694D8028644F89CCA
-:10385000252BCF4BBC7B26F89955769304F0A2A17B
-:103860001BC7592D76D9B2B32371DC8D25E3B74040
-:10387000DED0ACADA3675932F19483DF471AFB1A4F
-:10388000E4ADCFF99CCE1FCBE36679E9FEA8E7E56E
-:10389000DE3B2C54452FCACA9B25517BDEF358EFE3
-:1038A0005628AFCE9A384BA276B0E7C1DE2CF88608
-:1038B000F0EAADD7B0FA26A5BF6B66417E70CF1394
-:1038C000AC3C87D607C0CFE5F780AAAE1650CFAE86
-:1038D000E6F647891F55195E62700AFB9D8F4BB54E
-:1038E0000B6455AC063F47B49DC2DF13D82C7BB1A7
-:1038F0007C5F866F7E16ECA3660B0113DC8B7F3337
-:10390000388ADBAFA8BF7BB13A93C9E5BA61AC3F57
-:10391000055FB49FBAACC2CBEFC701FD146AFA5978
-:10392000F965E673B4FF7CEEF932F3F1CADAF928EF
-:10393000FE99F29DB957B2BDDF81F92DFB26DB0F51
-:10394000935356CDFDFF738DBF1C0576FFDCB3E6A8
-:1039500024E0C3653FFD55562DF87FDC1F3AD3792F
-:10396000C40479DF2BC2ECBB380D61F69D9C15BBFE
-:103970003A4DD3C7421E6BA7A95435BFFAC8EF5CB6
-:103980004937AAFC9827B30C3CDEC67ED771D94FC5
-:103990003FC0EF092E33B4BF0F79BEE46A1647D398
-:1039A000AFB399BF770CCEFDA3C40BB66531BFE3AF
-:1039B000628E3708EB5C9745B02CC6F86ED787BC93
-:1039C000BFAA78A6C76B8A6C1699E2BBF04D5F332D
-:1039D000E49DD63E955D20D2790433A6FC386BC0B9
-:1039E000F8662F8B6F76B0F86695ABEB2E6AA4C89D
-:1039F0005FB6CE7DC8722D21373C4EFAEEFB41DC1E
-:103A0000B0CCACC8CFAA595327B3781994F767D56F
-:103A10003F04F2B39FFF3EDBBC89E3E241CEBBB380
-:103A2000130C0E2AFF3BD3ABFF027C316FE2B5D300
-:103A3000E17989D936AA9AC5C7913F76A65784A05D
-:103A40001EDA43DCC3670AA5DC4AD7E1FBBD8879EF
-:103A5000D3BEBC045FB47B2A7BB8BDFA4B163B0FC8
-:103A6000DA6FA0F32C88CC43199F72FC5D5D10B710
-:103A70005A37241FFC687B46C9A9ACC2C8F8F60CAB
-:103A8000DFEBEAF1E972F3E0F960E77188D3E31460
-:103A9000A75BC56411BE94D0A7D76F9C9AA029CF0D
-:103AA000999144BCEAB8E99C744DB9B22A47D3FE57
-:103AB000F6856334F5E5E6AE098D97E1EF37D89EDC
-:103AC000C1FCDEA31D17DE9A0B7EEC76D123D0F568
-:103AD0002C7971C75B907F7D167E82A480C5C5D886
-:103AE000F71AF9798CE49534E731075E3081DFAE5F
-:103AF0008AF3EBEEE51DC438BEFE3C46C917FFB2A3
-:103B0000E731D230FDEF797EF40A5D1929DDDD89D8
-:103B1000F4693EC0F2989BA9DF02DF13FBEA2E7323
-:103B200010BEE1FEF1AF4E9864D5B94C43B8097FA1
-:103B300057B774F7093CB7D991C5F4F68A8E4F4D43
-:103B4000704FEAAB1D2B519EA753FD9548F9A6ABCC
-:103B5000938CDB05F1E46C1BE6E12C6BB91EE3D41E
-:103B600089E1B908EBDBAEC7FE96876FC2F20AFEA9
-:103B70007BBEFBE3BBA6831DDEFF0B27EE075F13B7
-:103B800043A39E847ECC36D40FE5E9F3D6819FB063
-:103B90003F3E30F64E3A5EF9CFBE8A79E82B760981
-:103BA00018372D17C97E01F2EFC371D85FB9F8C776
-:103BB000092BE9F31B4A995D2D071F87D68B45B664
-:103BC000CDF83DE918BF93E619C6F48AB19BCD7BC9
-:103BD0005A7836F6A7D4170D1BAEF99E9F3165BBF8
-:103BE000B4C01A598FB15B40F8B5F018840DBB66AC
-:103BF0004B907FFEFBDCEF27039E687BFC3E587FEB
-:103C00007D3C319144D15B0A34733D3C17F4309CC8
-:103C1000DB677B670C4B81DF23EC962CA047AD164E
-:103C200007F82F338BF3E55AD5BAC4976EC37B10D0
-:103C3000E6E45E23D8EFB914AAF5F6FC1876E6C6DA
-:103C400061CA3D9B26F6FBBB8A7E7FF7EBEC3BA867
-:103C50003C3EA0C8D375C30C9AEFE974094C2E0200
-:103C60003F67E702D3B37D0B61BE5D25A4F279D433
-:103C7000A35D59701FFD3F357F4A5F0BD0DF2E7566
-:103C80001388632C19A6D81D26CF979AFFAD7CBD4B
-:103C9000AF89C40F7CF1DA75D77579E9BC3AEF1DAD
-:103CA0003F1EEC8232DE3DC3589E2971F47E8EF9B0
-:103CB000867B126488EB97C399C784883F0FF98885
-:103CC000103F6CD8637E1A3E90DA60A7FB7B2BE432
-:103CD00005C685806F3B7F1B2781FD1833C277CFD8
-:103CE000B042783E7A2A7CC7C7DB619608FA41DE8B
-:103CF0007B015FB1E67B29FDA5C8A39ECF7C2D4C3F
-:103D0000FE7C5C0EAB39DF2EE072582D7912E13C5F
-:103D100066FE4111EF452E58238CDB05F101D98653
-:103D2000F7F4153954E4CD087C391EF893F1657D1C
-:103D3000D8C9E53B9BF7CBE4A05C64F976E5639CCE
-:103D4000B87F5E114EC2768ABC2A72BA3EDBF76338
-:103D500058777933956F3A8E6FDD9009202F113E99
-:103D60003139809F289FB86B557CD0DCF999047C51
-:103D7000629C2C209F98292C55F151459F7FE298F9
-:103D80009E4AE731737D367E4F59A9FF591FBF0CFC
-:103D90008EDF9FE2ED17584323C1AF3536C679E079
-:103DA0003BF2679365D463AB3609F8E384AB8C15BB
-:103DB000A5E05FAC7A42C0F81EF81DA07F8A0E37DE
-:103DC0009AD4E720B785F3F0BCFAA6F00884C10CBA
-:103DD000DF8BC017D5E15B381EF3A29EF79D6FBC49
-:103DE0001FE36AE783660FFBCE98367E57E8F5E05F
-:103DF000F99FF1A0916C9321EEE613F17C2F93389B
-:103E0000BE2DB0F81DC4F394F89B724EA7C4E1CC4C
-:103E1000F03D5C951DBD20B565C13EA45F3CAE8400
-:103E2000D9FD8FB61BD9BDADCE3F161968FD87D918
-:103E30005E8CCBED73FBDE86F52CBD31F853232D64
-:103E40002F7BF0053BC4CB157CB64BA191B05F6ACC
-:103E5000A77884F8607BAB581664FE4EC26C557E22
-:103E6000452CBE5E1ACE41FC28F646D1DFBF5CEB86
-:103E7000C64DA9A2C72F658714FE5ECEE56039C87E
-:103E80000151DB9BD915F0BB662457C07BAE117B7B
-:103E9000C3E441D1D394DF516ECA733231AEAEE880
-:103EA0006DBD3DDA2BB67FFB6A3847937D7132C515
-:103EB000CF949FFCE385776855FDF33F9A0A742AF7
-:103EC00019231038C7BC949EFC7FD95BF3F900809E
-:103ED000000000001F8B080000000000000BB55B15
-:103EE0000B7854D5B5DE67CE9C9949322FF28020ED
-:103EF000249C993C0825E0F08884879F0702018470
-:103F0000E0046F1135CA2422CF840494CF28F4CE64
-:103F100009090894DAA0D6528B7642C1528B6D788B
-:103F200058D38A303CA441AD1DAF7DD02A7450CA0D
-:103F30004B9088F582B754EE5A6B9F939933495052
-:103F4000DBAFE3E7B7B3CE5E7BEFB5D7FAD7DA6B7B
-:103F5000ED73100F7E2EC94318B3AE2C678A9DB146
-:103F60007BA12D81F63AFE6E634C624C69059AB1D5
-:103F7000A879A623F6DC299B18CBC0E70D8C153158
-:103F80003643E77B7F3963B73076BF9BF15F3D30C7
-:103F9000F565ECDA0013F14DB1B239FE42786E8E60
-:103FA00064C7CF57EA9920CBC09A270B34EF8C9582
-:103FB00051B32D1DF8EC36F7360FD0C5C3E4798523
-:103FC000317EF12BCA5D26329B900AF29AA32CB562
-:103FD00010E7D7E556F93A5F22779AC6FF3B91D5AD
-:103FE000B7C2F8DFDD765B4401B90EAC18314294FC
-:103FF00063EB15CB16DA5F591A8C1DC958C76BD6FF
-:10400000D016909BC17C02F05F7A6D50683D6CEDDC
-:1040100004EBB8C68056F7A6C8B8AFDA7D29C45FEE
-:104020009BEC0A09D05FEBECC8F7833C25FB93C2FD
-:104030006C28ACB33FC9CC60DD2B390F14CB45F8ED
-:104040007CE044C10942EFB59A19F0A9D9CA68D4F5
-:104050005B4FF2EBF225B6FAFE4BCB05D5E5626C71
-:104060005A89433541BBE86A0E6323185BBC762A44
-:10407000B5AF043341C98C4DBA5A0ECA60ACE6EAFA
-:104080009DF47CC9D514A2A77D3B528AFB61AF0881
-:104090006C1BC85FD6EFBE550CE46B4F6643F6C091
-:1040A000BEDABD59BE46E8AE6E9E4AFC65BF983C7E
-:1040B00005F7B5640F30E3B8022194877A3A653783
-:1040C000B1DE8C3D64E3E27F5AF7A791328CFF7436
-:1040D000A4631803D64362EB536304B2673BDA73FD
-:1040E000C2CFFEB1FB2FC0275D159902F258AF0A6F
-:1040F000D446E4C022D407F031067CD5BBFA8E0C3E
-:10410000D8BF0A9E7E25C98047A9FA1309F16485A4
-:10411000B624AE7F8E8693443DD6CA1CD75FD50F9A
-:10412000EEFB8A785A8578CAF88FE26915EAA91BEE
-:104130003C3522CEFE553CDDC08E3EE689E16CDA90
-:104140009B1C1F2CC7E1DBC6082F2477BB252BD473
-:10415000087CF7A25D115FD7591DEA730EDA372D7F
-:1041600086D7973C819FC4DBB93D592D5C5AF855E1
-:10417000EC7C37C3B8716F7A1D53E0F91C68E3E338
-:104180008615ED57D8757F3BBEA69D9FD5F8BFCC51
-:10419000CEAF6976666EB0E348B29F8C764DB43B85
-:1041A000DA15ED5EBBCFBAE546761D9C1B68EF2E97
-:1041B0004E3077B209E58CD9C57A27E2E6D3B099BB
-:1041C000A17FF564576913D7BB4EAF0E9BA784E858
-:1041D0003C6069E543082F47FF9DF85356D2FA77B4
-:1041E0005B2FC6CEC8757E33F0CF2A86AE9BB07FDC
-:1041F00069B362C6F8027F8EA1191566237D6AF441
-:10420000B2C844D8EFB4A73AFB55EC9F34CEA58D85
-:10421000670A6CAB93FFB45C1BD9407237733B06E3
-:10422000A266FF90387A24D08E38BA3881DECCF975
-:10423000F11C71D33C211EEF617E6138D2FA7C9A69
-:104240001FB08ED25E60BF197B04F77AB0F73DE3F2
-:104250002E59D03E6525D123FD60BFFF273FEAB729
-:1042600027C1738C83206FB2A7A159356BE3C17F3F
-:10427000AA35355A5B0545043B55170B21AFA7AB53
-:104280001E933DC6F30C7F66E3786619F9F5C6A365
-:104290001D69BC97C687AD5F63FDBBC63125D44D94
-:1042A0009CCCD4F9AE01ADCF0FBABB13F617EAC65A
-:1042B000DF640FF79F88C954C3405F059EEF35DB6D
-:1042C0006E05FB328E8F6F789EF6AB855C5C256148
-:1042D000BF3792D7E9D1FD38B65FD9383E7C237D10
-:1042E000A577D197868F0546BCB8CCFEC39F821CAC
-:1042F000AE74C1AD82FD97F893363017DA5FC7F719
-:104300008FFC4A7FD85F12EBC4AB11DF21FF44D092
-:10431000E312A6F76F69C673C96FEAE4E778DF2B8B
-:10432000748E2F00FCB8181F3FD1D3D2ACDAC91E4F
-:10433000D44F74EE0DF0DE9A408F4BF00F0DDFE49A
-:104340009F18B7413F79DDC48D4A4DBF1705361B15
-:10435000E35E6402CFF7225EDE3678787EB750D314
-:10436000E352AD8D24C7E9A17FCCCEF00BB302C3DD
-:10437000BE494F77A76BFB56C3FEE9B0AF482A1B77
-:1043800022004E56B4EC6D6ECA8A8DFF564BD88F04
-:104390007AE89C4FDD17C1B87FB7A6A78696FD11B6
-:1043A00095C73301FDAE86000138D823A822ECB3AF
-:1043B0000671D0CD3EA775F51B3561BC22DD607C52
-:1043C00079571C2A09E39994FE75C66B769A9E600C
-:1043D000C72909769C984057E874C810CFF438571D
-:1043E000D5B671756F9063F176018F098CD7166120
-:1043F0001863CF78DEF0DB47235E65A91FC4FC6736
-:104400003D6F456C80E5728C6784DFDF362B6097EB
-:104410003BD1DF897EDBAFB8103F75AB33813FE422
-:10442000F95DB30D58EF69DA28614EB3D5F34EB399
-:1044300019EC77F7C85F1CC1F9CCC2BB91E9C20D7A
-:10444000F0DA9CB08FCD09B49AC0FFF497C4F7A6F8
-:1044500084F12B13FA3724D09B12E8B5C6F195737B
-:1044600005F2934AB01F2AEECBFCE6D79ECE7CA184
-:10447000F33C13EC942719703FAD91D3873D27FD92
-:104480006B0BE3E8960FF47848389618FFDD9BCE67
-:10449000543C3FA41EE2D9AE9EE25941E279C7FBEB
-:1044A000FF8A7FF6C5BC9319CEE543A2913E20EA70
-:1044B000FED61179D88E0F75FA921FF3F169DF37A6
-:1044C000EE0BEA42ADFFA27F22F8FFB4EFEAFD1740
-:1044D000FD4ADC3E75FED27F5E1771BDBFB45CF055
-:1044E0006F85F92A2684F3EAB04DE52D9C33229E90
-:1044F00063B536EE4FA5AF897E3C672A92C379CB70
-:104500000AE3F6C95AF3719F075688641FB591D71D
-:104510002355CC6761500A1D70B9EA5F00FE432B3A
-:10452000C47A3CD74ED4A7F546F9077B79BD77C846
-:1045300035A0F783401F4899639181EFC0E393A8AA
-:104540003D282A6B3A00C7573DD7FCF641D8EF22E9
-:10455000FDFCBDE58ABF01E2F4158F4CE303A9EE33
-:10456000DE6D98AFAE97D83619E5F13D4FB8F98EAC
-:1045700075D87A90A3B261706FCCDFAABE575EDAAD
-:1045800017F8AA564B3E81F8D850943BB07E92055E
-:10459000FBE73669AD3A99DAFD5FEC7E7328F07778
-:1045A000AC137D5B8079DF55AFB30AE4FA3089C77D
-:1045B000E10F2EE43A51CEEF7A03A217EC5AE974D8
-:1045C000240B7878B865E74C9877438E62F616C569
-:1045D000F8F77F21CEC17CF3D50B55BD03403BBD21
-:1045E0001CAFFBAE56F5AE8A3BEFE75D34939EF70A
-:1045F0005BE48731BFDC9F9C25A8E4C7AD69E5E09B
-:104600002F73B5FC1AF052BFBB9B73FF1F1E917036
-:1046100076CA5ACF3E04101FF876C63894531F57F7
-:10462000F4FB40A303F1DC5F1E1E9F47BBB227DCF7
-:1046300084FB88E12CF51D3C2F298F063ACFEBDA5D
-:10464000A802AED821C8FF518E74A514FBD94A60C8
-:104650008038C6325BF3E3EF236279EA2A2D1E70BD
-:10466000BEE3AA83EAD6E33B924258CF1C57DF73DE
-:10467000307B3C3FF793F94E878A87F11987C38CCB
-:104680007A3D610E9E7E14C6CD7B4EA2383AEFB9BC
-:104690008C951D180FC09E79ACEBBAFFED9568DDC7
-:1046A0001EFD84C9E513C7C5F9893AA01CF7D39349
-:1046B0009FDCE61D50BEB5B0673F99AFE5EDA5CFD5
-:1046C000497EC4F9FC228799DD0C75F673AF6F4300
-:1046D0003CCE5F9A34DC0A82CF7FCE4AF68D3A1CFC
-:1046E000AA1BFA034E87B917B4FFA5E121DA90445B
-:1046F000758AD8DB42714F5C5324A37E4A4466B668
-:10470000C1B9223A7DB29FD34D6EA8DB563B8A6574
-:10471000B4EF0AAF4C7AEBEC77CDBE5D80BAE632EF
-:10472000EC230DC69DAB7FEA995120DF79169A35AF
-:104730000AF47E190D0DEB5CDE238654AC8BCD8A1A
-:10474000B90CE2DE02C6FDBDE6E86ECB78F8734137
-:10475000DDFCE9581F2D0C491F44B5DAE73AFCFF90
-:10476000197BCB82F9EDE2EDC6E7E03116F4AB9AA6
-:1047700056E3F35AB6E1137128B6E60FA205DA73D1
-:1047800058B7FEFD3F0F391CC757ED75A49F1E0C8F
-:104790007F0C67C341B3B04EA1EB2E845DBD48F2E0
-:1047A0008AAB9242A847319B9F0F9399104A42408F
-:1047B000B861DFB0EE95E0B121870110E2632348D4
-:1047C0002FA78280A781A00FA78DF8C5C7C4901519
-:1047D000D62D49634A2FD4E733E58C39489FAA1B6D
-:1047E000E8C9E975668C4FE7B4F85229307F2BF998
-:1047F000BD2F1BEBE379CF2591FDE63FBFF08F3F47
-:104800001889F62A4B8FF7A3C735DCC17CCC961AE2
-:104810009BE74CC3B7B2519E921F415D89F5A61824
-:1048200078E66E8A97293E8A5BEEE87746214E1A33
-:104830005286AD678893BED9DEC2D8F8F9AB56E48C
-:10484000F3F150AF3A315E25D17EAAF7580927958A
-:10485000EB4485CEC72C0B9D8F1F3425115DDDBF2A
-:1048600098FCACD2C402B80FC8053329AE7395B317
-:104870006A3B5376DB31CE6F88884EB28FAAD9CD92
-:1048800082F6D9E24DA3F5E7A08EE1DC3AE8D5F453
-:1048900062E2F861FB84D0368A4F7532FA7F85492F
-:1048A000A03897E88FBB3109C371D9BEFB715CCDCD
-:1048B0001356DF2A0F9741D4E5013CD59822F37EA9
-:1048C00088F3FED24AF71AB5B08F2427D517CA2E1F
-:1048D00090BFD6CCCC16BC9792793CD3E5A995CBAA
-:1048E00027234EA1FF9819FA6B1C3C1ED7F4E2F760
-:1048F0003DCC610B6D8B5F0F65CEE1E36427FAD988
-:1049000068C20BFABD09FA2F31DE5FE22C96A3F0E4
-:10491000BCDDC4D6E23D09CA336868DCBA40F71D85
-:104920008A785C6AF63AD00E69B366E37A2F891406
-:1049300097C0999E28C6FCEF257104D6B195EB0E61
-:10494000956E427AE730378A50F9F377E97C5AACB2
-:10495000E12C8A793F9E5740EF84F63D2FCF2F02FE
-:1049600022BFC779CFCBF37F5DAF7A7FCD3A89EC99
-:1049700051B39AE3A1A6E14F346F8D23D21BED51C1
-:10498000F3B2740BE2FA941627AA1AB2C61D037C7E
-:1049900054492EB7008FAAD5320BD2D5CD02D1FA09
-:1049A0007A35EBFED0DB54C8E7C3D6AAE128366FD0
-:1049B00046369E671FED48CBAE8CB3FB474DAF38F4
-:1049C000653BFA4D38CF8DF7304B937C5BC84FB9C0
-:1049D0003D3E6ACADB82F73473DD118700FD731F29
-:1049E000CE49C573EE843B6CC1FE13AD1E13D28A53
-:1049F000DB3D0E69C57C33D11F41086FD5EA56C433
-:104A0000F11281E3A67AC7218B17D64BCAE138BBD6
-:104A1000F8D2BBF9785F50931DC9C7F3177095DFC3
-:104A20000FEDF2A24079C2921DA292343486AB25DA
-:104A3000882BF0FF451AAE96EC79E511F4D3258862
-:104A4000A7E15D710975E5617ABEABA594F1F187C7
-:104A50001177FA790F749384F76A168D8675904EE4
-:104A6000CEE1B881FE89BC5F2DA47384452D980FDB
-:104A7000D78A3C4F007FCAC43CA2B64D523BE325C7
-:104A8000AE8BFD85B1FE9E703338879F27550D563E
-:104A90003A8F066B7A89AE7BD989B8B8F8D2A12350
-:104AA00063B0BEDA25B831DE77F1434D6FB5A82784
-:104AB00027ED93F2A25AD48B33A6A74E7FD3705121
-:104AC000CBB81E74BDD49A353DE9FDDAF8C21C8E10
-:104AD000C36AA6E975CF40EEEF9A7FEBE788BEBFC9
-:104AE000402A1FAFE3EBBE1C8EFB31DA3EAB013731
-:104AF000BE42C29762B945ABFBA1EBE2CE16BA3714
-:104B0000D2EDA9CBBD5C5B1FE2B4D22B3566E7A822
-:104B1000892DE8EE9EDAAFE94FB2F3B872B2A1DFA9
-:104B2000FDF5A0BF453B441F290F6BAEB875ADA680
-:104B3000A883F2D2C74437EEABE467E5B7E3BE75AE
-:104B4000DC49DB0573DB48AC337A91FE75F94AFA30
-:104B5000F86FEFC57117467974394F0A61B297BA89
-:104B60005370F33C376AC1FB43DD4F13E5BD2F475C
-:104B7000D0F201618C7033CAE393D1BF199C8324B6
-:104B80008FFDD80A5A4F3DBEC23334B6CE09D56127
-:104B900046BE138CC7011D9727B5FB8893AB5FA159
-:104BA0003C585FE7A1AEEB04EAD3BBAEA3F32FD62C
-:104BB000F875BF684FE5F82F69FA13F1E971167FB0
-:104BC000780FA7EB53D75B9C5F1AF4A3FB97EE4FCC
-:104BD000BA5DFF55BF622B33285F7D5CDB37F94838
-:104BE000EFD8B980F8C4F3CE6A015CDA0DE726E5A8
-:104BF0003593FB7F620974F35CD753E2F3583DE5CC
-:104C0000CE46FD4FB6679A300F604D998773E3F239
-:104C1000B20FF1BE0BE36906E3EF33187865DC7978
-:104C2000AEE76BFA790DBF0D9DB884F1B5E9CA39CD
-:104C3000EC5F3072693EE6119772BCB4EE79D66AC9
-:104C4000190FF3559F8D943AE558BD72EBDFC3A25F
-:104C50000BEF03F7780CF542F585C3E4DF352CB292
-:104C600006EBDBCA75EF968D42BBFF14F271E09B39
-:104C7000DBECA173EFDCD6074660295BB93A8FE81D
-:104C800085DB1EE4F43A9ECF55AE2E7A01EFE33F6A
-:104C90004C524A11DF1D1B0537D65B63B715ADBCFF
-:104CA00007FAC73A06F442B98F6FFDB06C0CD60D07
-:104CB000F522F98BB2F5A959D8AFB4893EDCEA5C8C
-:104CC000E65E790FE2DBEC227F3BA19D138D12C7DC
-:104CD000D91B5A9C38A8C58D831A0E4B1A1BF34D4D
-:104CE000B86E0B9C4FB0FF0A8BDC1AC6BAEFB53E0C
-:104CF000BE2DA82F285333014767059E7F2FB03064
-:104D00001BE2EAA814598EF21F5DEE18D6800288C5
-:104D1000D76E41BF50B43A0BEA265A57D797BEFE1A
-:104D2000512D8EE8F3E8E3DA319FC2F34393F75C49
-:104D3000D34F67619E706E7B5E2A8BD3FB39DC1785
-:104D4000E87B21C4C55DDDD47F7FCCD1EF23427CDD
-:104D50001DEDDEF0A8D4DC1FDFDF421E7F2A3E2FD0
-:104D60003FD39264433C421E6F7C2EF1F304F278F1
-:104D7000C373F09B53C67C5FABEFC40A57A09B384C
-:104D8000A4B78979FEB91C7BFAE914D625CFD7FDE3
-:104D90002E71BC9ED777DEB3BC6F4F781F33CAC568
-:104DA0006EB0FE852018066ABF16F45D907762CA61
-:104DB0003F7747B09E6CB6BAADA0DF53E857F81EF8
-:104DC000F06591E78936E60B032E4EFD61840FFDF9
-:104DD00070DEFBDCEFE6B50A217CC57E78E3E322DA
-:104DE000F23FB859607D84B83AEBE98DB3D0ED2E2F
-:104DF000FB026BFA02FFE5ED824F2509157B427D30
-:104E000075A4AFDC737DF5EFD655FA3D53A2DE33C2
-:104E100073B5FACAC77C46BDF3FA7C3FC0A7787861
-:104E200057BD5F0806A88EFA38B880DAD1AD2D25B7
-:104E3000FD40FE4BC2C927C6A2FF385C744F7221E9
-:104E400058472F013F6E1B716D06E8E755BBCB8DB0
-:104E500071E3E3603D3DEFC48B86CF5BF71C10FB35
-:104E600031E2DF3B16F8F7D95DF85AA39BF76DDC0A
-:104E7000BE9041F1F7A35ABDFDD0D2517DF0B9BE2D
-:104E8000DFF38F723BEBF29FDFFE8013F3D3033F20
-:104E90004CDB3B1AED9BE272238CE66F12596004E7
-:104EA00063A737F13874D6E67A613AE8EDECE63B71
-:104EB0007B633DF8A0D461F1C1BCBED7CA9D787FA9
-:104EC000F63773D4E9C616F8C32887392462FC1B69
-:104ED0003385D17BC0316133933DF48A9E7032FAC1
-:104EE00082391406FA237C3F88E7F6B564FE9E5E9D
-:104EF0007BEFF7E0AFF87D5AE7FD89768F3056DB20
-:104F0000EFC3B9A95C4FDAF39262FEFCCCE6DD3365
-:104F100070BE735B2537CAFBF15689E65F0475BC2A
-:104F200009707816F086F16BD1EF451F42FADC76F6
-:104F30005E272F02DCE27D71CD5249B1B8BAE2B1F1
-:104F400044E7DB2B507DADE37291122A25BD6BF84F
-:104F5000B4C17FD7E1C8E8C55AD7A03E1271FAAFF5
-:104F6000D6FD8B1197DDC583041CE8FAD2F110C37E
-:104F700027235CEA764F6D1D36BE1F0D50295EA8B3
-:104F8000135801E6058D165660461C98927DE8E799
-:104F9000F536E750BC67BA92C4DB474CEED7B15E3A
-:104FA000BE62922501DA13B91EB2C323A26F12D2D8
-:104FB000527A94EE07C4129362C2F3AED14AF12240
-:104FC00031DE3C9ECBE3703F041BB43FCE75532BC8
-:104FD000B13ACA1FF416369885F949794AEA673218
-:104FE000B03CBD75CA4C33ECAF7C6CEAF21CC82CEB
-:104FF000376F9D3113DFEB968F487DD90BF4F3B9F2
-:10500000659CBE39B54802BAA1E18E991381FFD5DE
-:105010005CE5C9DCA2D83AFABCF0FC7BB940BFDE43
-:1050200027B009DB5A8B7D2DC6FB4B42C712931864
-:10503000E37F4760275E1562745462D9984FFF186A
-:10504000DF7915F5DC9EC9555A72BB795EC5D86A01
-:10505000D46395FA9B6398AFC1CF6F03BCDDA1E128
-:10506000ADCA660F232ED85AE942272EBC18975C8A
-:1050700066F4EF199AB9EF30870FE0F841ACC97DBB
-:10508000DA46A9E0E6EB693DC779704C765A9F0F86
-:10509000F6774982FD825D05056C0D2E2580922BE9
-:1050A00020BE097B7FF339CEDBA8B26812D9A1C23A
-:1050B0008D71516001D375686B52000FA0A7652FE9
-:1050C0005F3C8CF05FA8E75399FCFB8CE51A1EEF60
-:1050D0008828DF6F01A1CE04597A2ED8FA223BF836
-:1050E000B119D63D670AFC06F55D6D7A2B7B998C6C
-:1050F0007EDBE8C4FCE5E2CF45DF741857ADE5ED93
-:10510000EC9A18BE0D9EB77B066D591F87A3482EDB
-:10511000CF172E78C2D92B307E7878DDC9AE1DCA64
-:105120005E01FC53BC538BF05C7A9A29FF931BF70A
-:105130007E7186B9FBEF2FDEBC89E73B6C2B3F5FAE
-:10514000AD66A63A52A9654ED0C75490A518680915
-:105150006891DEC787687DE473629E223F90C9DF55
-:10516000D7303FFAA36E47DD3E5DEC0622637E6ECC
-:10517000B23109FD6510DBEC46FFD6ED3749B4537B
-:10518000BC59F632BF8F5B26449BD2907E09CE4B32
-:10519000D497E6975DCFCD6D1634C582CD0F507C88
-:1051A000D2E3920CFF217EFE53F792D7F57373186A
-:1051B0001B86B8FAB27C478F4B601F4B5EC6D7B0D8
-:1051C0000FAA08F63B5F5B7B9258219B512F193643
-:1051D0001FC6E565CFE5D079C79A9E64F17C6C73F4
-:1051E0001AE1738D47243B96B5F563323C5AD826B5
-:1051F0003019CEB9E96D69443BAFF625BAEC277D8D
-:105200002660FEDFF9DEF22703893EF7C29B230307
-:10521000FC7EC586F3FB992E47612BE64397ED2074
-:1052200007D8C16F5F4BF7857ED659C708D705A44D
-:105230000125E84F8AA472BBD81AC8AFB57D2D737B
-:10524000733B2E3BCACFDD65E3F9FB3DB33AC8851E
-:105250007890DA451602FA9B47C5A230B0366A71DB
-:10526000D99A6962729C3D92E46426C7D56F4C5509
-:10527000225827CDD6709252906AE87F5C08482861
-:10528000D76CFB3CC28DC3779361BE4876693BE91E
-:1052900023C0F35B1D4F4CBC6046393F1B27B03425
-:1052A000C0C53767437FDCBCD2B84F260AD41AF397
-:1052B00062D0CBA91BE1696A9E86A7416C10E129E7
-:1052C000413FE01F947F5E86731CD326C82EBE3FED
-:1052D0000EE859ED120BC9946F92FF5C5652E8FE2E
-:1052E0007EB5A6271D77FE81CCA1C0BCAE62A3DE31
-:1052F0007A2946BDA54D31EA29C36FD44B9FD95EAB
-:10530000437FDFC0370CFDFD160C37D05975630C99
-:10531000FC03EA2718688F7ABB813F67ED4C039D39
-:10532000D77C8F817FE0A62A43FFA0D02243FFE0F5
-:10533000EDCB0CF490D6C70CFC37B7AD32F40F0BA5
-:10534000AF37F48F687FD24017459E35F08F3AB65D
-:10535000C5D03F3AFAA2A17FECD95D06FAD68E5F9E
-:105360001BF86FBB7AD0408F676F1AF84B6CEF1A3F
-:10537000E849EEF70CFC93333F34F44F953F32F499
-:105380004F2BF8D44097F9FE61E07FF6A6C0268C3B
-:105390003FB34D1B8EAB0CE3B3FCDD7180E7BBD29A
-:1053A000CDBE30327DCDBA2D94A7E5691A6E3F632C
-:1053B000F6FB4DDE2F8F83AB312FC8405C4F6778F3
-:1053C000DF7BB955205CF7743EBB20DF35C7EDA30A
-:1053D000976283023C46A74D711BE80C7FA681BFF4
-:1053E000CF6CD9D0DF375060E8EFB7C067A0B3EA21
-:1053F0008A0DFC03EA1503ED51A718F873D6FA0DD0
-:10540000745EF36C03FFC04D0143FFA0D00243FF65
-:10541000E0ED75067A486BBD81FFE636D5D03F2CAE
-:10542000BCD6D03FA2BDD94017453619F8471D0B51
-:1054300019FA4747B71BFAC79E6D35D0B776B4192E
-:10544000F86FBB1A36D0E3D951037F89ED1D033DB8
-:10545000C9FD6703FFE4CC9386FEA9F239437FF5CB
-:1054600047003FCC9F5F15E8FDD7B4824F0CFD523B
-:105470003AE4E9783FCD927DA2D0354FD7F3B732E9
-:10548000DFE786751E31D5D17771574C3CAFB3E459
-:105490007B097790BFDB6C1467E1841A42572D0DAE
-:1054A000989FBA54817087A94605DD17A6D37B055E
-:1054B0003A1A65FC0E0DF21B20524D1E0FD60F2915
-:1054C000B13CB4FFF5115F3D0F4DCF67FCBE293FE6
-:1054D00090949F81F5D8CE52AC4F1632750DCA010B
-:1054E000E7AB0BDF33BD9D64BC37D2DBA936D05FA1
-:1054F000DC7A47939AFB0FBF81DF4EB55D20FECE6D
-:1055000079B57B2501F6B72C6EFE27A06E324309D4
-:10551000D91C04FF023F7D32E826FAE96026D1CF8C
-:1055200004656A37050BA87D36E8A3FECDC162A2EB
-:105530009F0F2A44878253A8DD12F4D3F3ADC1D95B
-:1055400044BF100C50BB3DB880DA178375D4BF231D
-:10555000584FF4CF832AB5ADC1B5F47C57B099E864
-:105560003DC14D44FF3218A2B62DB89DDA5F075BEE
-:10557000A97F6FB08DE87DC130D1E1603BD1078359
-:1055800011A20F078F117D2418A5B63D7896DA3742
-:10559000821DD4FF56F02AD117B4FBFEF1F9FC5E50
-:1055A0004ED78B4E333691F0A0E7B533B06E4170D5
-:1055B000144B1F1BEA9684FA21D11EE7B575A40986
-:1055C000706C639E7353FE96C6B87CBF4C5BEFF164
-:1055D00064A62641FC6BC0621EA0D890CA428DF41E
-:1055E0007E95E7DDF3355CB2749E6FCFD3E49AAF5E
-:1055F000F94311E2B380F0F9D6D7A993F43AF95BF5
-:10560000FD03F7113EB34C2ADD13D843F998F78711
-:10561000FA0702F920DFE5BA078FD07A6E5F3E2ED7
-:1056200052660D67DC85F73F4745BA2FED69BD5AD5
-:10563000EDDF2FF4D8BFEF5C7F3C87A67C21D27DC5
-:10564000FADB926336DE8F2CD3F4B22CDF6468076A
-:1056500066F997A29C67F2EA5E7808582A96E6B93E
-:10566000306FBD034B6BF0FB72264BF47D2C535E09
-:10567000C74F26BF09891DD2773195DA9DFD028F6C
-:10568000E17EEE860202E9C0186B7677FB4994A7AB
-:105690004993A74993436F2766F91B71BE53798AD3
-:1056A000419E47B364ED7BF78EE751AEFF7DED93EE
-:1056B000D3424E4CDFFABDC49AF1DAF7534B05FDE5
-:1056C0003D35CF076D4CCF07A9BF6239BF9FB90FDA
-:1056D000EA327C5FF9BE160F2FD749142F2B846452
-:1056E0001FE6D397EB960FC4FD24C6CD0A18678238
-:1056F00071158C7F0F51F17E0AE10BE663F8DEAD88
-:10570000023277ACFFAAB3F47B8FA83D83CBA3E032
-:105710007BD8397BAD2D58A7024EB6104E468BAACA
-:1057200005EAE4B74DA17C41247C580490777E3A89
-:10573000E0A39BBC40C7C112EDDFC7E8CF015F3BD0
-:10574000507F1FFF6A5401BD37D9375A46FD359A3D
-:10575000C01E785FF386C8BF93C02B76FC8EC355FE
-:10576000D842DFF9631281F61AEDA0F721074456FB
-:10577000BFB39BF8F9DB7C5E5FBD9D294D09D1BCB1
-:10578000C6F77C47343B1ED1EC5B76F068D62330FD
-:10579000EF927689EA1D36325AE8EFE6FBA6DAFA8E
-:1057A00037FBE6C6EDA3B6ED24FF2E8A450BE3BF1B
-:1057B00087FA9BB6BE8E27D1E208B4D8E3E5E3F7BB
-:1057C0004580EBB7345C9FC6BC7E865576DD0543CD
-:1057D000A3A09A30B4811FB9E9BB3AFDFBBAB9CC9A
-:1057E0004FED7C8003E2D8AF6EA4FA77116BA5E78A
-:1057F0004B8A1FC846BA96754CCCC4FA656DC3EB8C
-:105800009920DD9DCD1B27E1FDF3CC50E5EBD8962B
-:105810006F154E63DD0D7E711CD78F0A75ABB124F9
-:10582000BD67C7F8D578CF3B43E476606F723B0025
-:105830008E1431B5EBFEC00F4EE178F003925FF7A6
-:10584000838A551C3FFABFC7E8F48BE2C57FED871A
-:10585000EF3ECC1DF45D48ED3E6B2AE26B11569E87
-:10586000627C5EA89FCF3C2F580C7901F29D97B8BF
-:10587000FDCF1F4FA27FF7725E007C0CEF8A7B3D4D
-:10588000CFBC62E2F76E8F88B04511EBE5A7484FB9
-:105890000B6CA1A1A827389FBF401C2EFAB075CD74
-:1058A00030BCEF9B10CAC67C557AD1EA6BF418E283
-:1058B0003CBB9E12BBC77B42E2F76A89F276C95BAA
-:1058C0008A8F7C8EF984D5C2547C9F04FECFFDFE66
-:1058D0000497FF8A2990798BC8F315AAA3FBFBA92B
-:1058E000FE67BD6DBEF542D7F59BB475DBFFC9EB16
-:1058F00069358BD1F7388972086EBE6EA23CD664CA
-:105900002E877EEE749587DB4197277FA087DF5334
-:10591000642BB4EF06532F8A5F97C440DE403C2FC0
-:10592000B5FB31BD8E6DF79CA1B8CEAE35F6E7DF85
-:10593000F7867B3A4F2F74D6CFDED879A7DF33B105
-:1059400071DDDF0BFA6D6E09ED3693F928EE0F620B
-:10595000EFEBFAA17BA6FF0732EFAAC6A039000041
-:1059600000000000000000001F8B08000000000085
-:10597000000B7BC8CEC0F0A31E82C539106C6271CB
-:105980002D0B03C37B56D2F5C17005507F3110E754
-:1059900001712610A700713C104701712810BF0249
-:1059A0009AFD14881F00F16D20BE06C41781F80C03
-:1059B000101F47B277291B03C31A36D2EDFF8DE4BF
-:1059C000E70940761910CF20231C46F1F0C0723C45
-:1059D0000C0C5ABC08FE5E5E5479791E047B99203B
-:1059E00065766D05EA070050DE58A18003000000CF
-:1059F00000000000000000001F8B080000000000F5
-:105A0000000BD57D0D7C54C5B5F8DCBD773FB3BB2D
-:105A1000D97C10120870F3014608B8240141B05E29
-:105A20003E8CD1A206B4482DD505F908494822DAA2
-:105A3000CAABBC66490209883628225AD4054141BE
-:105A4000898D7CD8D406FECB4731F6A98D1615ADCD
-:105A5000B641FB14154844119FB57FDF3967E666F0
-:105A6000F7DE6C08D6DAF75EF8F19BCCBD7367CE33
-:105A70009C39E7CCF99A898D6532CB10C6BEC69F9A
-:105A8000CB18BB59668C8D8994A3EFBCAEACA90032
-:105A90007EFF9BCDBF558DB4D3CB214CA2768CA578
-:105AA000323696B1CB1CF02BB49BF2FC893F5D944F
-:105AB000CCD87E26333B3C0A2B5392AE867EF67FB3
-:105AC000C5FCF8DEF2BC3BBDC38DDF05194B61ECB4
-:105AD0007B8C7F17CE50D37DB95861167CAE39E8E8
-:105AE00077E8276B63157C7FE60B377D6F86432F46
-:105AF000D957161616DF7C9D89FD2A9F75E4887A92
-:105B00000683C19980379DC6D5E13DF4CE0704EFE9
-:105B10000105E055638CEF00F89323F0EF67D7C5DC
-:105B2000B35C0EBF363602FF378587E6DF8FB1FAEA
-:105B30006AF5FBD956C6EEAE66DFCF1ECAD85DD574
-:105B40000EAAAFA8F651BDB63A95EAF50A7C0278DE
-:105B5000A8DFC64241F8DE5B00EDF5FEE0BF3BD7B3
-:105B600061A8DB92E17B47A4AEB8530D7547BA6AD2
-:105B7000A80338475261DE23F823181F7060C7F16D
-:105B80001D4CBB00DF0F25BC3805DE6A3DC36EC867
-:105B900004BC34BC22332419ABAACD42F886BA6DBA
-:105BA0006A08E01BE15E308D79615C6F8031685777
-:105BB000FB2063F7C2F3E1EEC20FF1F913D07F03CC
-:105BC000F42B7B1B8EDAE1FDAA0C9B2A235E762840
-:105BD000EF229E1CF00FF196B391D723F332D687B4
-:105BE00033A8EBF380EF7F9FB0FEA80470D466DB90
-:105BF00054BB1419A77B5DFAE87FD8BA73F73F54FA
-:105C00002D9E8C74AAF73B8C056A7CEEFFBDFD8E41
-:105C100000DC26E545FAD5C7E9B35F58FE62F876A1
-:105C2000D846160A4B3DC719AAFA8B82B8DE1B1557
-:105C300016CAE0CF93811F860A7EA84F9FE10AB85B
-:105C40007BC2C3A2C7C98CACCB50D536C7320ACAF7
-:105C5000EC996512D0075B17F55D262750E4975F36
-:105C600054FB881EEFAECEA1726BB54F433EB9FB1D
-:105C7000EFF2ACE6DC9E7CF8579453F0DD3D5646DF
-:105C80007418DCCE425B25ECAFEAE81CA8AF199D86
-:105C900092B75A25A02D28C774FA5E23A944DF4184
-:105CA000A06F947F66FEB8DB5A7C15D2FBAAD11692
-:105CB000A906F19CCDE97DA835ECC882E76BD665D5
-:105CC0008E0688D91AFFAB1D38EED0A1C388BE87D7
-:105CD0006773FAFFFD98F50E9483DDF35F9AA26572
-:105CE0002731168FEBE38EAC97EF3CE9C037310AD2
-:105CF0005F31E8401FE79FCD0FDF1D7D359E93BECE
-:105D0000D6F8333FB4C3FBADC0E7B2D413AEC42161
-:105D1000E1D4E2DC9EF436341BE80CD7C97F6E3A3E
-:105D200033976BAB43EC3D187C7D752AD1DDBA6AA5
-:105D300095CAD54887202751D6B0F150473AC4F5C7
-:105D40004A2FA07AAFFB155B4EFB51C2D410433EE5
-:105D5000598FF479093E5FA169B045F5CFD1EB2C9D
-:105D60006C01D9BF0EDF0FA0BA865BD85D925E7F53
-:105D700026A8C1F7FD7278BD507A26589B0DFD39D3
-:105D8000F9F745D2292D981EFDFD5D9A3631D21EB8
-:105D9000EAE1C9D9D1FD41FFB9D1F01CA4F67A7F5F
-:105DA000F3A4635A10EAEB9CBC7D8374F45FD2FFCA
-:105DB0006AA93115379A5552375EA89FD57A3DD8D2
-:105DC000A869B9917132963FAD05A3DFB3A70DEF76
-:105DD000C72E6F0C06016F0FB0E22C09D637715633
-:105DE000552AA844CC393BA459D568F838BE23F3CA
-:105DF0005B4FF0BAB2F9FB5CE98F5A6DD4FA4C9262
-:105E00005E0E22FCBA7E63E5A4057A4FFA6D2F027E
-:105E1000BD5BFBDBFCA467A443250DC69B1A642A6B
-:105E2000C06151830CE5815555DE8FE6039DFE0070
-:105E3000CE71046771D5AC5EE00C46C3A9C3D1171F
-:105E4000DC3A1CBDD3291FDF4C4F936F1CF78789A9
-:105E500040E2CE76AB1FF53C54995822FCF2D57D3A
-:105E60009A025DA6DC04B85769DD66B1AC9EFDF60A
-:105E70009F358085A2E6F9CF5ED72CAC8F21BCDDA3
-:105E80002C8D89AC2FD4E744E3719C6867A63F7DD5
-:105E90007E0E9C9F1A3DBF5A4D2988CC8F298DA913
-:105EA000C59EBEE7B7CE593CABD8DDB3DDEF25AE1E
-:105EB000474F9E31EE5AC6C72359928CE3E545C63B
-:105EC0004B9EA98F178A395EBFE2EF169F667ED47C
-:105ED000E17522BC19D1F0F2F5D7E15D6D05BE8DFB
-:105EE000B1FEDF35BCE7CB7F2E90BF2A7C6FC901A6
-:105EF000FECBED9DFFFED9FD25E3AF404F9F2A2C41
-:105F00007C19E0F1F6E98E50508AC8B97F35BE524F
-:105F1000F015ACDFED2FDD72EC320B5680AE47464C
-:105F2000C6AF905482BB37FAEE6D3E8C850CFDFCFB
-:105F30004FCDA737BC7ED772E87CE56BCDEB2E6EDC
-:105F4000DF65B310F27F7DDBE5F10CBEAF7F714AF8
-:105F50007F84C3DE308269F98CDD8F9F805E512F94
-:105F6000F45D767DDE79E919ABAB995607FACB1E65
-:105F70006F15E945F512A3EFD780DE16023DA6E0C6
-:105F8000952D8E396ED4ABEEA5B2DECA488F297836
-:105F9000E5906F0A4CC135347134DA79F54EFDF96C
-:105FA00091A22C787E57363C07D2A8F7F0FEE07914
-:105FB00031B68F1BCA9FF706571CA84D75517877CD
-:105FC000DA428158F2F17B160BE1E75ED4BBECA814
-:105FD000F7AB543A5D8D01243AD7609BBA39A3E7F9
-:105FE00077B32C5CEF5F3BF4D9306E73AB84FE76F5
-:105FF000E0F2C7892F5DD98D9A05BFF773D7C0BD71
-:1060000026FDCA9DABD753A529B067BA4CF5BBF5A1
-:106010007D37A84E427DCD2BF49D4935974EAA8DF4
-:106020007ECF2E9A84FBAEFEFEA69A31F43ED1516D
-:106030007574228C9F08F2B316594751A52AA4976C
-:10604000EB1363D2CBDA2B1DB342F07EEDE5C33206
-:10605000E6C7B0736015699DF57A529191AEEF1560
-:10606000FAEADD427F4D451E8F926B4EDEB45BAE89
-:10607000392FE072CD95A32E47BA4C2A627ED4B355
-:10608000D702FE0251EBE4CC01F9166577242AC64B
-:10609000797D57F37980693FB4F4EBBD7F337F3D61
-:1060A000C00273B07DA2D8A75C397E2990DBF7FCD3
-:1060B000CDF3ED6DDEDF17F884712A628DF3AFC288
-:1060C0004BA21BC629F8E78FE3C271A2FD45E78901
-:1060D00077D84784DF8DC9B80F98ED2A57814F6272
-:1060E00016AAB6A3FD9D84AF00EF1ED658340CF857
-:1060F0003AA978E5AD68AF79DEBEF243360AEA1D0B
-:1061000073A66159979BD73619DAC5FB7DD30B89E6
-:106110004E19E1791576467CB768F924981FE1009D
-:10612000F8EE51CB4D9382B99CBD71BD7F22E682C2
-:106130009AB7A2EFEB99B1E66163618E5FE96B7B81
-:10614000CFEF7B9BBF35F29DF0F72D213F695FDFDD
-:10615000B16936F21B06E11FDAA309A67EE2355BC0
-:10616000C4AFC8104F517578FF42375FDFFA2F195F
-:10617000CFC7EE75A8A807655B7C68A7C7335F0229
-:10618000EA7FAEA9A00880BCF02577052D6ADFEB79
-:106190005207A605ED674077D3A3F4DB3F5BB87EDB
-:1061A0009C3C636AC60AE8F74C01F70327F9B8DF9D
-:1061B000C13C9FBB603F0BDBA3EAB99B897F6B812E
-:1061C0009E32812F82B916F267AFCADEE98BE66B89
-:1061D000264B026F66FA60AA027894057DC8D9162C
-:1061E000CD39EADBD387FC0FD247DCB4A8EFD83730
-:1061F0005F2F8FFCCDE8E3DB8EA7AF6B4FBE5A2E2F
-:10620000D6759E03F59B95A933E263C9D9DED7F510
-:106210005E5A57B067B5508CFE13BBD733D8B34C1A
-:1062200011EB493FB719D64BEE3F76D6A673AD5B5F
-:10623000B2111F7ABFCEA5B2FA57145E8A8FFCE462
-:106240000ED1DF2AF5DE20EA2967706F077CC88D42
-:10625000A3C3B89FB26CE6DFCA9B901EE254B5D0D0
-:106260006AAE2FD3BAE8F0D9D22D86F194649701A3
-:10627000DF6C1668D951F03B97DA080E078E07E3FA
-:10628000C83EE85042FF3F0B3BBDD423F587437D1A
-:106290009D85F53B0D74509F9E1773BF53C4BAA2E2
-:1062A000B9CAE9F5CEF3932FE6F1AE37C27BDEDF54
-:1062B000B915F5FD283F5DEFDF29EC7D1D5F80C43A
-:1062C0001F77D33B5FA79556D622C5833C489DC90F
-:1062D000022AD4F115EC630D588E473ACCF3915E47
-:1062E000B04D52104E626915FFF3FD6E382AB5406D
-:1062F000B7164780F024BB3546EDD5F3DB0FCF5AF8
-:10630000B99E9C2C3143FB65B28DDE2BAC98A1BDB0
-:106310007CF69D2B52A95F0D1E8D8DC061EE77B866
-:106320001C58268F41B2E3F0E007E81F601D39E4F6
-:10633000CF4E13383B3B7F06D913BDC1F7A089BFB1
-:106340001E14F6012B2EE8635E9C8FCFC298EDD809
-:106350005E515D380E3B9E437CA08AF1370733E9DE
-:10636000F9E68673F3F92F110ED04F1FAD7650F971
-:1063700058B58F4AFDFD63C2EED922713B447FFEC2
-:10638000B9CCED845699EF179B1D8D4EF2431F7CBF
-:10639000F0CA61C05F038EC87E27E02F6B913F314A
-:1063A00010435EE865F61A23BF3179F639E15DFAEC
-:1063B000F6A4E987A2F8B149F624BF1F07BF5CCC59
-:1063C0002E46FAEBEBFBB3D5DAF44343BF3D5EB6A2
-:1063D000083BF4F3DA9797939E13BE8CF87380A072
-:1063E0009B01E55C1EA8752CA422FF7EF5358BA6CB
-:1063F0000FD8A92DE84F1F58C2D843D07EF33C8B4D
-:1064000086726BE05A5BC842FCAEAEC67ADA11996E
-:10641000ADA6BAE69E13E58F4F93DF5E0E14CC86D1
-:106420000AFD4CF7ABEBFEFF4141637C62208BF22F
-:10643000CB437F6942BF4B33F9F1BFED7AFCE57F77
-:10644000683D1E53FC2E5FD4F759122B8EB50F9E5C
-:1064500011FB54D6DD5BB83D52E266EF45C52BB665
-:1064600048FE44DC0C1E5DB373BF0DE35125CC3FE9
-:1064700014F09D5EE5B344C3A72871D48F9569E1FC
-:106480000BA0CB15736676EC45B9359119E4580C21
-:10649000F9A128F85D32971F8FAD99C1CBAF647217
-:1064A000EAA4055908E35B53E755EDB7A22828672E
-:1064B000E4EF4D2B094A08CF802AE65755A22BA2BC
-:1064C000AFB4D92CA4F178CD9154A08FC182BA0673
-:1064D000235DE0FEB3D418171A5865A48BB4126379
-:1064E0001CA83FD2057CD7DF442FE67E06A87E8A13
-:1064F000C765042D3C5E34CB18D749635D1F3E81D0
-:10650000F01D72FBC3384E9D715C73FF0A0B5CA0DB
-:10651000801CD9F3F3896002C3AE1C9C9C8478D99B
-:10652000EC288E27B982C1AB187E971EF4AAEB1D0A
-:10653000BDB48FC8D1A0C1BF662E1B86A6DC36179E
-:106540005AADF204188D1FCC20F96E15F1CA8319CB
-:106550003F75A05FA33E398FF213F6631DFD38EA45
-:10656000B0FED172DF8A7EA4A4487D85885799C782
-:106570002B54385DBECFB442C4C3687B3015E9D913
-:10658000AEA6E4231CF654D0BB627C374E71717BFF
-:10659000CFA77C698CABB97DEF8BE029F16172E20A
-:1065A00079E1235F09FC10C70F4E067302E93F91A2
-:1065B000856A717DAB1AF93E17697713D231B40B36
-:1065C00062FCBFBB5D00DA8D34B4BB45F4A719DAB9
-:1065D00015F7685722FA638671B51EE32E16ED484B
-:1065E000AFEB6EE7EFD1DF12312EE983DDEDD41E84
-:1065F000FDDDA1C36768E7EBD16E990E9F615C6614
-:106600001CB7FBFD705BA896F4CB62F2C71EE8577F
-:1066100048F472A85F6111C6C16F7BC1CA65C436F8
-:106620009EE7210BBADA2FDAD5B9395DD556B371A9
-:10663000E5201F1B44BE4AAD7BAE2310F55C5F3FD7
-:1066400078EE8BFD7C8983EC31F15C6970925F138D
-:106650009E933D56F777596C5A3F9B8C71CD0674CB
-:1066600054613D78758D960DFC9EA618EAABD2F963
-:10667000FBAFEBAEAE09A2A34F29A6F808D0E7F70F
-:1066800073A3F8B07BFC7F19FCDC7F1C81FF4735CE
-:106690009A120D3FAFEBF0EB75E720FE5EB6CE9E93
-:1066A0008CF35921F6F5CF946535E44FFE5F3BBF7F
-:1066B00045A6F55964581FBDAECFCF6A2DFD3F36B4
-:1066C000BF3B4CF3BBC334BF3B0CF3B35B974E0EE5
-:1066D000669FFFFCCCED565B8B49DEAEE8F7782A6F
-:1066E000C2B542F8A79D56AD6639C61DFA75EBDBFB
-:1066F00024DF4733ED6F2837FAFA6EA3A2927C7637
-:106700007A2C3C68D3CF161A9AC1E19A0172A1453E
-:10671000F171F92DE03C62AA7799EAF0CB97B86F56
-:10672000FA986E4F9AE47C1FFB5A7D06DF4F1A3CA5
-:106730009A44792E625FB3E9FBDAA099B48FAD4831
-:10674000CD23FB65FFA005248F56A60FEBCFF3F0FA
-:1067500052495ED9C55EF34035CF5BBB5FE407AD00
-:1067600048CFA376F7EBF19250BA61DF3CF0830596
-:106770004519201F4F1FE1F98AABADDC7EA8AF663B
-:106780001ACFC37350B90FFA0D408356D0F7B07CBF
-:106790000EF43D2C5BAA53A97CB65AA572278C8BAC
-:1067A000E5AFAAFD5436558FA352D7171F14FAE24E
-:1067B000F7D22DB47F3E56CDC62BD0FFA66A0795E3
-:1067C0008F56FBC62B40970F57A752795A9A31CE56
-:1067D0004AFED38EDA7858AF3DAF6653BED2C4744A
-:1067E00085FC1E4C09CBF10591E73A5E4F4B932F88
-:1067F000B502DE2F512DBC9D2354EB8DDD6E32F69C
-:106800003F4E55081EE60ECADEE498EDAEC0766334
-:106810009339DCCC17A8F5C4EE6F1A8E9B972CE049
-:106820004B566BDDB1FB9B8EED2E4A15F0A5761D08
-:10683000888BDD6E268E3B3255C097DE3E392EF6B4
-:10684000B83FC2FEFA2736521CE932B477A03F7B2C
-:10685000BABA897C16A2DDE64155CC0274DB3FA9A9
-:10686000B10ADB5D5A55CC32A1CC4C296616A07F0B
-:106870007B32BC077852453F13E6F1F79BF1BD2709
-:10688000EABDF87E7C09BC877A667FE37B7D3C7B32
-:1068900023D3E54998813CB0AF61DD793D584FB1D4
-:1068A000F0FA9DD60393296E69E3ED1FC13AF463B4
-:1068B000AF337E9FE2E2F57BF4F65EFEFDD3A27D70
-:1068C000FF443E6FE78D8E10C6C51EFDF79FA6CD17
-:1068D000CD8DCC77C8CF975E38376A7E8FFE7C35FA
-:1068E000BDD7E733A47A0DBDEF8D5F53675B981674
-:1068F00025B7521A73499F1C6DAF22B9337AC8CCA1
-:10690000F01C58176B31876BDF8A553535D9045722
-:1069100090F205045C0FFFC408D7A09F1AE17AF833
-:10692000A746B806DD716EB8565BB95CEB0D3E1834
-:106930005F8B1E3FB4DC38BE5A631C3F54631C5F40
-:10694000ADFDD6E387A3D7E5917F338E3FF867C6C9
-:10695000F11FF99971FCC1777EBBF1FF59FAB8D7E5
-:106960001AF80FABD0C7E568BDB32A68D03BA15D6C
-:10697000BB681794A3F5D840D0A0C742BBD7443B0F
-:10698000CDD0AEB847BBB7443B661857EB31EE5F8E
-:1069900074F82CD1FDF97BF4F757ABB0172CD1FD6F
-:1069A000A93DFAFB5087CFD0CED7A3DD29D11F3325
-:1069B0008CCB8CE3C24F0EE6F3DCC15C7EF4F72E89
-:1069C0009DDA40F1AFFE2C20A1DFCF97C4461FC255
-:1069D0007D398BE7DD27142E1D82FB784382D1DFC2
-:1069E000D5CFC6F729C52653BFBE38564579878E01
-:1069F00060DAF4A87C8B32D1AEFBBD3B98765DD4D7
-:106A0000FB14F17D83885727AD1C538B72C537105B
-:106A1000DAC7A0B7541BB70BF5F72CD9DFAE01BC12
-:106A20001B7E3C63CC6A163DAE95B71B22C64D8FCC
-:106A30000D5743061FB714C7CDC5E7BA7E114C23C7
-:106A4000BCF978A93F5FEFF9A9F457C04BFD548713
-:106A5000458E87F76BB89F53F7B727D8AA1C98B70E
-:106A60005B3BC8C236AB94877C4E3F4E5DB5D1EFE1
-:106A7000A9F88A35B4F70694F8F264D6FB770F15B7
-:106A8000598A62C51D0AC4BCEA4A263766C3F8ECB7
-:106A900090D17F0B84CDA2F36186CB81025B2CFF6A
-:106AA0006D1DF79FEA7A50C28073FB6F6B857ED1B4
-:106AB0003D0FE828D6FACD12F0B10D1C6F8A8EB7C3
-:106AC000C41964DF25D45CE9F0C5F86E95A97F2769
-:106AD0009BA161BBB8E446662179C2CF4DE87A55E7
-:106AE0009D6F33DF87D280A6300E94BC338CFC734D
-:106AF000A6809FA35052434189EC513E4F542BF145
-:106B0000274E0907D1DF386083C2C220B7D65A02A8
-:106B1000B36C185FC96E24FF98E2D324C4D3596BB9
-:106B2000E84A3A5700EAE266A927BCB7D8B83FF866
-:106B30002175C61F3262AC63894D35C4B7077C61CD
-:106B400063E1FCDEDB47DA71B8BAE93415E8732497
-:106B5000C90DA2D34A592BB7119FA7FBC8EFA8CBE9
-:106B6000579DFF459C7BEE38267ED41BFE04F358D0
-:106B7000D46665C83FEC2B681D15FF5924FC5F7374
-:106B8000855F751E2BF6E2CB93CC52847C7592BD4B
-:106B9000EACD8F5AAF069B8DC3D56025FF961ED7D1
-:106BA0009DDF6835F8BB166E30D617B019292897C7
-:106BB00016ACB3B210E07391C91FB614E70BF02FF7
-:106BC00064552B7DDCAE207D7AAE8F2949B0752CC3
-:106BD000FEF5C363E740FD17887718FF23A017353C
-:106BE0008AAF4ADD211BE647BDB73B7FE60486DF5F
-:106BF00087560E40799AC0629E2FBAA5C1085F5F82
-:106C0000F09BE165ACE69C7028DBA498FEAB877531
-:106C1000FE10EBB5D4E11DC540CE9C75F2B2DB9FF2
-:106C2000F26727C9F7BD4847B4DE5517F1FDA0EA62
-:106C3000622CFBFAEE80A03FF3778B1D1D36E48FAC
-:106C40004AA5AA48B244E24D766B401B08DF595B67
-:106C50002685073243BB86F36CD726659E57BB2239
-:106C6000CB39FA3B25E4E5F33B1EB3A15D76F2C9CF
-:106C700063D7201F96FD56660E68776A878785C999
-:106C80002E09D9509E94EE9663C667290300F056EC
-:106C9000F62B0FC989D29DF6D034F8BEF4D9F74649
-:106CA00031C0C3A99AAEC303711F7D52E271D26095
-:106CB000C728DCB74A157673718CFE3A04DD9DF85F
-:106CC0004D1CE5B548DBF6DF44FD36DF60B547C94E
-:106CD0008737705FE2EDB87F6DBB141A1A437EE808
-:106CE00071AD13DB250E5F8B35E444F8B66DB2054C
-:106CF000008ECA6D9F101D4DF9559317F150D92282
-:106D00001BFCBE95DBE4B07D1495C7B0C478890444
-:106D10007C5DC1B87CACD8BD98FCE115CD777D22F7
-:106D20007BF17B233D035EFC61C4EB1BB27F1AD673
-:106D3000773DE15501551FB56FF5225EA1DF39B6EC
-:106D4000788CEB1AFDD8D8FF17893DFB03CBDD8685
-:106D5000F455D9BC8A8F67E2978FF097B49EF113F0
-:106D6000BBDD934C7AA21E3FD996745E7A6259D3EA
-:106D700099478230DE899D1F3F1204B8CBFFFFA7E1
-:106D80008FDC897ACD3EA70FF9BDF2C9D7BC2C6A3A
-:106D90001FCCB073BE3BB5FD89C71F023E39F5A6B7
-:106DA0009DF2F24EEDFD6030E6D39E7AE6BF52547E
-:106DB000687FFBDECBC99EBF7DCF94FEE7DA0F91E3
-:106DC0004E43F668B842D4BFDA22A1B20586BC2889
-:106DD0004DEB7270B7CC9C00E7C9A3F610E63557AF
-:106DE000C2B3A579B84E8B49FE627D19E0B7624700
-:106DF000FD27F2A858780E0EB4A46209EC928AEB33
-:106E00007CDDB597166069F5AB4817AC8BE4A7F944
-:106E1000BBCA23B09E17F5BE7E67D85736CC3FA9B4
-:106E2000DCB18A8F6B5ABF93F8CBF89EEB7799DD74
-:106E300018FF3AC3CA1F7D085FEE4E8A19D7D5E303
-:106E40005F8BF7FCE09C7A932E07FAC26F89C4E14E
-:106E500072DBB56BEDC84F3B9F7AFCA164BEBED31D
-:106E60000021A79ACE0C66401FC7AD5D37A17CEC10
-:106E7000DA6BF7E17E5EBAF70DE2AF537B5EB1A944
-:106E8000241F995B023DE114EBFE6947BDA142E27C
-:106E900095CA2D9EB0DD1B59A78AD0F422D54BCFC1
-:106EA0008FD1F310A7FB8AD0FEEBA518EBB6D29ECC
-:106EB000C9E571A81FE165F1963FD9288E1DB59EE1
-:106EC000D2385CC76385F8BCB775D4E7EFC3F95F08
-:106ED0001CB59E5B38BFF6C697A736D915CC4BD0EC
-:106EE000D7F794C8BFAD0C496FB018FCAAEF6FDF9D
-:106EF000341EBADC440FFA7CFBE2E7BEE7F1CDF0CA
-:106F0000742B26578EE989AF135FC596EF1B857CDE
-:106F1000A860554503B27AEE4F0A188C033322F06D
-:106F20009EC05800D0D98927653A2FBBB2F920C935
-:106F300069B35CA8E8454F6EB2733BA7A265FF2812
-:106F4000945F270EFC86E8B062C7311BDA4787B72B
-:106F5000EDB275E446E81EE57F741EE689A7F78F5B
-:106F600022398DFDC7589FE744FF95ADC6FE2B77AC
-:106F70007C62E8BF2CD86C23BF681FE37CA4683711
-:106F8000E07C3F6AB732CCBBFFA8592E8AA5DF3C14
-:106F90006AB71AF3613C638FA25F514EB4A928EF20
-:106FA000EA966B6F04715F7CC5CACF3D2ADA51CC7B
-:106FB0000BA84DB0A968AFD6796632354A6E379ABC
-:106FC000F0E94BF64DC2B89A6F6A7141B4FDA4C3A3
-:106FD0009FA0590CF0DFEE29EA8FE79FD00E53F106
-:106FE0009CB1E227BFB2EC2D2CC2F9C83E8BCF1961
-:106FF000737FE6FD59DDC56437597D96EE5C13EC71
-:1070000077F4949923D075A630D5A0E7AF9DCAE355
-:10701000B8FAFCD70E621B19C8DDB552571BE6B390
-:1070200007AFE4F9814CD8E95EB4D3337AEA734C04
-:10703000D354943F247E787BA6459D0FB903C0B1FD
-:10704000601E8FC54FCAFC1DB246793D361C370BFA
-:10705000EDA7103D8F6361AA5B1C5CFE7858153D5F
-:107060008F671D8DD9D0F9DBF6E2B32837EF2D4AB3
-:107070009438DC61CADB4810E358E2D2D3CEC5FFB6
-:107080006CAA7222DAEF63671BC92E41B7E3D749B6
-:10709000113CE879717ABF6B9D1325DC6F707E031C
-:1070A000F15C8F3837EFEB9EAF46F57E7ADD340E1C
-:1070B000B6F48D155B2CB162405264BC2DA091FCDE
-:1070C0001C03583395E9AC9DCA44874F5208BEB79C
-:1070D000C92F6561EFB2AFE34CF09D873E7ED6A22B
-:1070E000BD1980B2D62A9EBFE3096D85FABA04663F
-:1070F000381F9CE9E0F264ACC3A2E72707A2EDAE1B
-:107100005A564E737726F3632CFA773F7004863B0A
-:10711000A2E219B2BB9DE77F09FB57B7D72F97971C
-:10712000F1F87B2AB7AB7B5B9F15D5C506BBDA5C54
-:1071300036F673CCD9C4087EEEA7921CFCFCB2C60E
-:10714000545F34FD61AECDD8E8BC464D23FB5EBC38
-:10715000B7C2F4F0A51DF128F7A4BF62A4BF7E4812
-:107160007F1DA2932EF25354CA81229C6F6A76959A
-:10717000C49F0724EECFD2649C6F8AE8DF12579E2B
-:1071800076AEBC2A360BE8232AAF659DB01F158565
-:1071900029AE3C8467A35877335D1AF354757DCDCF
-:1071A0002D6A76912FF7BB8257E93C8A92ECA6FCB8
-:1071B000147741DDAD789E5C61553E949F6E3DFF36
-:1071C000C4CFF30A75BBD89963CCE7B49BF257AD33
-:1071D000C2FEEE91CF2DF6DD7BF0410C7DD8BCEFE9
-:1071E00056394C7AB4F89E8D8B9D37A8EB61E74BEE
-:1071F000F7663BB2DCD17E9806F769946FA9087FE9
-:10720000C3A4EB7DE407EFDC21F1736B263AEADCE3
-:10721000193F0AE521F22FDE6F11279E4B3BF6EF57
-:1072200047BDA9CECBB484449273AA0C785F298D54
-:107230007648502EDEFDC9CBBF45FF7AABCC706BD4
-:10724000EE84B9B5E3FC142D01172B8EAD31ACEFF4
-:10725000379D4FCFB822E7B7253E9DDFDCF4FDE92F
-:107260001D129D9F92D98807F01C44659B9585E06F
-:10727000FD69C6FB3FBD91EB030B5F805160FD379D
-:1072800088F1715F8ADE3F928A5C4C8DCEE3096A99
-:10729000ED78FE7F9EC047BFE244C3FB8FE716B583
-:1072A000917F26B080F44F3C5716DD5F99BCEC020D
-:1072B0001C8F093F860AFF90FEF4F99FB5046C7C91
-:1072C0009F288E0F933E03F62FDA0D2189F295CC7D
-:1072D000FE8E8A1689F6A745B03FE1BD028B422695
-:1072E000FBD19447A7E3DB4C97071D421F7433770C
-:1072F0002F78F587797C94F86AC90B3C2F6C4993F9
-:1073000014A27CE68E0BE219E15926BFD107AC6AC4
-:107310003DEC1C11FA35E1CD9E6AC4B35335E23918
-:107320002EC788578FDF8847339EE3C7651ADA97E1
-:10733000C9E536223281E71CF88778063948F3A878
-:10734000807984D59EF82C695DBB12FD1B7DE2D14E
-:1073500084BF8F4DF83BC35AF7F3B720525388B51B
-:10736000797EA41226FE31F39B8EA7745FFB247AEC
-:10737000E6F790BF38557422CDE3DF0D703473E625
-:10738000C9F313BFE979C271DDFBE57BEC6B286FB4
-:107390009B7EE818C6D3CDFCB5114BE0EBE66A87BF
-:1073A0006F1E8CF77435F3CDB362BCDA47658C7D04
-:1073B00094FA077AA4FDE01E8C4B26235F2BA1CD07
-:1073C000DCE68A9B86E7FC5AAD3EF45BDE93D7751C
-:1073D0000DEAED95F3799EE38F5D7C5FBDD5C5FD2C
-:1073E000B08A8BE737AF2EB6300DEDFB563924A1AE
-:1073F000BFC8A7BD7019EA5DAD5695F6355FD7CB0E
-:107400003FA2F7F93E8CEFA6591A47231CD09EFCE9
-:10741000ED9DADEF796F89D2774EB5DC7721EE3BEC
-:107420000F5A58492C3D3EDBC9C73F95F36E0A926F
-:10743000E3624717D9D1F51D55C5382FDD8EB0ED64
-:10744000E6FEAD8A96E9A44F1E5AC0CF63EE39C15D
-:10745000CF6316CAB3BF3F12EAE35F53B8DC64DA06
-:10746000B43929D484D6711DE64B221FFCD512AA4B
-:1074700021FC34FE11E354B5FFA950BE6C4115BF89
-:107480001FE4B7DEC2362CC76ACDF9C8D7535B13E9
-:1074900026E17999CAB7795EE59876A33F87C9E571
-:1074A00007D10F76E628DF962F3EAA98ED2E19F722
-:1074B000E3F11DC6E713FAA0DBC94EB11F7959CA23
-:1074C00037C98BBDDBA25DE9E4712C3ACFE5576289
-:1074D000DB4F0FBBB87E057891504E7576317F0D2E
-:1074E000E0A973DE009A6FE767FCDC65E75772512D
-:1074F0002CFBE82627A797076D3C6EFBE002776818
-:1075000039FA4D17940E41BBE8F37F0B0C8915A790
-:1075100088D8072CDE427B9E16CFC6215FD4F1733C
-:1075200066AC312DD6F9799D1F74FED0F9226D819C
-:107530002B10CB7FF9AE93DB6F9317E44836A4D7BB
-:107540007D12C5784ED5005CE7C06390D50C4478B9
-:107550002A5B3E25FF82A335B61FFAE7785803E978
-:10756000B626B87C02E0EBA7C0D441E4075B6346D3
-:10757000ACFE836C1DF99BE663923B7EE7E07634BC
-:10758000531AD36678904FA65CB912E07C08F80FC6
-:1075900049FE41AB9FE00E2E668CFCAB0AE7FFF480
-:1075A0006BD8A6D551F6568373D23A5CEF754E1E52
-:1075B000EF480AF82584DBFFF7B35EECBFF30B3B23
-:1075C000ADDF00E1E7D1BFFB958E1F97760FD14B62
-:1075D000493209437FC0EB9B07FBFF452D80EF2815
-:1075E0007A8CAC5B90BE4B0C80EC2BC0F38C163AC3
-:1075F000BF82F616DA13954CFF0992F2A9F31F1E0B
-:1076000036C3735ABABC955AA5B007E46681C31D48
-:10761000467F4A6209CC1BE351CCC1FB6B37EAA31E
-:10762000287951EEA20CA07D5AD83BBA1CD6E5773A
-:107630005D029783756B15CAA7DCA87438D17F9C4F
-:10764000A1A99331B52A515129CF615009469C41D6
-:107650003E663D9CD0ADF74C60EC99BFCB31FD1B35
-:107660001F74E32BF02CE26B545BD701549FFC4E4C
-:107670009684EB5D28F49BF127B93CD2F3FB2B8574
-:10768000BD619647BF013A478131FE52BEEF8D3F43
-:10769000E9F623FD74CBA10585B48FE6B5E61FC4DA
-:1076A000FC9CBCB7393F32217FC07A23BC8C6D0B68
-:1076B000CA880FB3DCE94BDEE8F2C4BCCEA05C772D
-:1076C000D731752EBF0DF82C6AFF36CBA9374C7217
-:1076D000EA0C9BD8FF7235424F794BFD07ED51F410
-:1076E000A3CBA9083D85886ECDE348CCD15DF76575
-:1076F000A17C7951463F48E7241E9F0C221FA1BF61
-:10770000E2B3D09538FF75AD573891EE77B64D712D
-:10771000205B2D49E5E7BD94FDD70799209FE8B888
-:10772000AE953954770EE2C542F8907D508F9AD7C6
-:10773000E946499C7754E3AF8F713F825E2E49E55D
-:10774000E7B976B665C6733B334CEBDE4DF7C20F37
-:10775000A1F3854EEF66FAD6F9A19671BF84AE3FCC
-:10776000C852B3B00B8D7E815ADDCF1174529CF894
-:1077700076A10FD6BA87DD85D7DBD48527FB302EDF
-:1077800071BB2793F2996FEFC7F166C6835E567E91
-:1077900001FA6154DE79A5D2457EADCA2F6C86E729
-:1077A0003A5E7BC3878ED74B10AFD23F8ED7B36282
-:1077B0007DCDF8FD47E79DBE645CCC7373FF57E653
-:1077C0003D81057EDB4176173FB7A1D3972E2FC6AB
-:1077D000DEB6218D88A3DD78AE479723E35AAA0E43
-:1077E000A28A68961317B5B2EB104FE3C30A1DB116
-:1077F000ED4B6E7C86BFA4D1F98B592E8073F4F3C8
-:10780000B3CA76C0A3512A4B9A06408D6A57488E58
-:10781000B1F6F38B4335873F4B41FFA2AE979ADB1E
-:10782000E97AA9BEBFE871A0D5AEC0421C5F6A016B
-:10783000BE81F9D7FAB8BDDBE00C94E2F33880D909
-:1078400085B97639E10C6E9F1AF9B2373E8C33F167
-:107850005933E085CE21C03E3754EA09873E7E96F3
-:107860002B81C309D486FA4BFA58C607ABE0F7D987
-:10787000A58F6201DC87F1F826CEB3C1C5F7935519
-:10788000420FD3CB0667F17284DFAAB0A03DEF1F91
-:10789000875BF70BAE7669D52E18C751A4D13C068D
-:1078A000FA981FF5FA814AB3E4073812CB55A9DBE1
-:1078B00059A3EFDF78EE679A3A89CE9765333A1786
-:1078C0003B10F5A018EBF34B17F7572F76741CC637
-:1078D0009079E5B4AA22EF39E2D391FB06FCC24FBE
-:1078E00065CCC3E8DCFBC6208C4BBEF3EF9F7A303F
-:1078F000EEF417A5CB83701E5FF6470F9E377867AF
-:1079000019B7336E32E9333B053E7D71C5DB117F1C
-:107910003757FF7DACE1FCF8521E47591492D1E86D
-:10792000ECA6EFB26D71E49BD3EB8B9B930C759D32
-:107930004E17DB799E9479FEC785FDB468C726DBB8
-:107940004015C70FFC16C73F2EF4B5E3BB3DE4CF8F
-:10795000D0E199BB63B40DF1F09756BB88C3B75B18
-:1079600039FEB569183F0B88A530C379785F1CF5DF
-:1079700037FF7E99F48B3930D652A0EF40EB22B21C
-:10798000B3CDF398FF8E5AD81FD66FFE2A89F452D2
-:107990006CBF0CE821B0B49EE26CE679CE099AE3A4
-:1079A00099CBC84E37E779CC63EA5D133362E47B49
-:1079B000B4F238F9C23EEC9A775C425F18CB2EC61F
-:1079C0007CF4332CF717B96ADF76CDF16A46495A51
-:1079D0001F553BA83C51EDA372BB4BE5F1EC96FD66
-:1079E0008789BE94F6B1C8EF3BDBDE8BBB518DC8F7
-:1079F000EDEF6DFAF4E02FA19ECFB8FF46F78FCFE1
-:107A000016F8BE4CC8EF85421FC8FFE2DCF27B3699
-:107A1000CE77544F7875B93D1BEF938DC2832EC737
-:107A2000CDF838DD9615477EC638731CF8DBE1A526
-:107A3000B7EF16CBB1F30675FED92EE879DE96E9DD
-:107A40002B07C0F8B57B3F18CCEF036647503EE8E4
-:107A5000F469A63FC6AA6CC8CFDD74D67A37E14771
-:107A6000A70BE0A354117F4C45BBCF4C6F7DE513B2
-:107A70009DB2760C463960A6AF53128B79AF68621F
-:107A80001CF797CF53B542B443617B59C9E3745C8B
-:107A9000FE1C571A0FDF89FCB985F3C7E25F373D3B
-:107AA0008B72A7F457F77B51EE7CA834A6E078E5FB
-:107AB0005B577831CE7D5C097AF1FB0F4372CCBC09
-:107AC000C2057192906BC67C05D610BC06F9F6F320
-:107AD000AD561FFA192AB7D9791C7C37C71BD47940
-:107AE000FC7B77EC7C85D227EE4F51797EAA316FF3
-:107AF000618B95F24FD05F86C3F416C7ED8E0B37BE
-:107B00009F3BBE5DB9FBAE9879277A7E80996E6700
-:107B10009AE815F042764C10E021B7B8885BD76E32
-:107B20007F60D43180EBC496FFF04AB9D17E731EDA
-:107B30001F3FDD7CCBA318E2E98D5E4F09FA8EE88A
-:107B40000DA198790CE5D6B017EDF0F24D56B2EBD9
-:107B5000CA9B64E6C07C9637EDB46F9735FDEEF5B1
-:107B60004B00BEB267ACC9D3F834285F415FA7EEC3
-:107B70003C12B12EA5BB7EC7E3BDAAC82711EB53AB
-:107B8000F6CC7E1BE6C598F138A579BFADC3948FBE
-:107B900040EBD47CAC90CEE56D3F6BC3FDF4C37D70
-:107BA00012EB9FD1F3FB924DBFF3A27C403C515CA2
-:107BB0005EAC57EFF942E16B9E2BA076E487EB6D4C
-:107BC000FD2EC6351A43F4FDF473307EC95B76CAC8
-:107BD000572A79FA36CAEFF940A9E274FEF08A14FE
-:107BE000DC5F4BACC1141F95FC79C9233F21FA5BC4
-:107BF000F8CA4F52F8791E2D8DFB6D8269E4CFD8FB
-:107C0000F8039ADF021620FA2B79582E467FC919FD
-:107C100085153D13834FFE2CF8E483CD760CA2B27C
-:107C20000F84DF32F8AA2CEEFD35C793F8BD2B6721
-:107C3000841DBD2BCEA2E7693BA2EDAACA2DF5EDAE
-:107C4000B83E1F0DD2FAFB28AEAF0405BE24D2C742
-:107C50005FB9BCBF9063745F8CAEE74CC1E7D8BE20
-:107C6000DD4AF7C6447D67B8F7E576313EC0ED9250
-:107C70002E823225B63FD3ED9674F878FE8B4E5F98
-:107C8000BDF1FD169E4FF2D9112E57302F86DEB76B
-:107C90005BC3FD0DF93076C3BD22917C0FABE06B69
-:107CA000E37B8093F255BAF1BB4FA238EB82757635
-:107CB000631E5C37DD98EFBB31E6AF2C34E95B7AAD
-:107CC00069960B6FC699E2681BCF2F7FA5DC1AA2BD
-:107CD000BCA3F237ED643F9437598B111F1FEF3867
-:107CE000F8FA8D40E71F37EB7C6B94AF66BE2DD959
-:107CF0003986C5E2DB8FDD7E16936FE1794CBE7568
-:107D000047E2112AFBEEE4EBC25EE4ABC5DD431FA4
-:107D100088C7BCDC8F9E2C1B427E06135E75B96A39
-:107D200096971BE3D45EF2EAF87E1EC977E4F8D397
-:107D3000E9B1F4A9C5344E37DDEA74A9D36D2F79C2
-:107D40005A663C9ADFB7097964F6670427B31CBC0E
-:107D50005FAFD6C672D0FF1CB4B8FC5B3362E4756B
-:107D6000B0AA0B50CFA87167C4CCCFF5BB7D68C655
-:107D7000326BB22AC78A77FBA75862EAF1F96E71B3
-:107D80003F09D202EA936E8EB73A115F014B90F22F
-:107D9000FEE98C36C297E0257EB2C27346E72AFD23
-:107DA000746EDB1F67F9540515ECDA35430A15F4D8
-:107DB000A7E65B6ECB82FA823579850AACB37F8207
-:107DC000655726D44BD6E4F3FA45967C2B90E6E330
-:107DD000C182C2A9D0BE429FE7BC78837F43B11C59
-:107DE0005B8F7117E5392BAB85FA5DC0D78EBC4828
-:107DF000BC37CECE824EA8C7D9A084FACA8C3FAE7B
-:107E00004423F03E7BE06A37C9A3C92AE2F584CF58
-:107E100041F932B7FFE672CACF2C7373BFF1885DA8
-:107E200013E8FEDDEF60FC1FBBC7F43E7E9D95F7B7
-:107E30007362E7882988D71143F8555F3AFEF31437
-:107E4000959E3B9BF1E829F17F2A9EFFA84DB051FA
-:107E50003F65DDEB757E65ADC86B90E3381DC8F1FD
-:107E600096AA67A05C22D6FF36810FFC417BB973CE
-:107E70006FFFCDFCDEA7AEC1B8BEB27CFACFA8378B
-:107E800076FD38CE8FE757DE72717CDD10BFC63AC3
-:107E90001CEA798EC1B72151BF25EDF80996D77834
-:107EA00002FFCEF1CFC2D8DF8D37C9BC3F7795072F
-:107EB000EF519334AE474B4034B3010FB51A536DB5
-:107EC00059C8A2C67C0B59CEEB0AD3B81EC3B82C36
-:107ED0001DF64158A71BC6F375029CD2BEF8C638E2
-:107EE0005E9F15CAACED50098EBB118ED1F6D02025
-:107EF000B47F6E04B588D3B5D1FED6E3F495FF699F
-:107F0000213BB352526BDD50DFF53623B97CCAE515
-:107F100015F907FC7E19DD2F31FEA5B95370C90A8A
-:107F20005ACA781E87F043E971F433AC55C6C9F4D8
-:107F3000F0539BE4E104B686E4645FF1B1C7DD620F
-:107F40009F19C0067CC3F85893FB3CE263E96E5D61
-:107F50009F17F176B1FF9F7E3193F285140573F27E
-:107F600018B3A932A588E8DFED36C95F9D8E471E9C
-:107F7000F1DD8278197984DDCCEDA55EF2238E33B4
-:107F8000CA6B1EDD9143F91156737EC4510B253C1B
-:107F90008D7D215F457CD689B8F1378DDBEB71FF94
-:107FA0007CFEA8471CFF396F11C541F37DB1E3F892
-:107FB00097C8B329EEC05EE4EBA7C7F1999C2B23C9
-:107FC0009C67C28C25219C478CF7C55C9C1C94291E
-:107FD000ADE66DE3F34BCCE7594CEBFD57F37A9FDD
-:107FE0006F1EC487FC7EB5D16C14E54158451EC494
-:107FF000B32C705F741E848EC7BEF24CCC7925E61C
-:108000003C92B480114F034B861BDE0FAACA33D4B7
-:10801000872CBDC4D03E0336C2E87A56C35586F6D7
-:10802000431B6718EA176CB8D1D0FEC2D05CC3FB03
-:1080300011DB4ACFB9EE239B9718DECB96503EDE7C
-:108040000BA9AFFB452D3F8B4917FABAEB795A982C
-:108050006E84F81D03EBFE5006F98FA6486ACFF533
-:10806000F78783B42F7FD3F5CFF6087DE81BF2BBEB
-:108070001F898DF25AB99ED8697537A05E9C00B0F1
-:10808000A1BC35EB1709ADCFFF17FEDD899EF916B0
-:10809000EA72A4A33B646D3CEEF7FD447E649D450B
-:1080A0009C279DEC207DE01E8BE5E6E87B922FF57A
-:1080B000707BE0520FDF5F7E09FB26EE9303E358EF
-:1080C00090F64F0B8BDC6701F3F52631716FF1A64B
-:1080D0009553D3319ED991A326007F637D5044EE02
-:1080E000DF68576B311E305AE6721CE4FB959E7EAA
-:1080F000B8EF2CB372FD2768453C0F74B0A0378FE2
-:10810000F63D8A6B26B06469492E9A5EDDFB8BFAD8
-:108110003510C3C1D211F16807BD8C906090D6E1D3
-:10812000A2FDFF87BADC2BB990E4DE69B79E37A6C3
-:10813000D279C7D3F3B2E8F99B3701D701FFBC6905
-:1081400033DA457DF9A74A36DDE741FFFF9B39CC9D
-:1081500090675026F056861762E2B993D07FA6202A
-:108160005A3AE7FF6D18025D29B5AF44115DBFE1D2
-:10817000D662CADBDD3D3D88FE3FDDEFACF753D96B
-:108180003A8975DF230CFDDDF006F77FDDF037A3BC
-:108190003FF7671E7EEEE86762BC9950F8006F33C8
-:1081A000613D12B07C7E6221F2033C0F4B50BFB6A2
-:1081B0000D543FA0FBE9810C2BC2F347E67F6D0F06
-:1081C000C0B3C2A3D238D7B3622BC2F5FA4D8B3DF0
-:1081D000D8AEBB3FBD9F8178A613F6E984A03505D4
-:1081E000E8A7EB5289F67518CF81CF8B670F5C81BA
-:1081F0005B873EDEEB2C70F23558EF19CC4FFDEA71
-:10820000FD33E632C8C19D25657F49CA44F967211F
-:10821000FFC792BD76927F9DA5679BD6C3FB9B0748
-:10822000760C42FDE2ADD2BF0D43BCFC7083CC5452
-:1082300058FF475D81B59E28BCBD39EF530FBE077F
-:108240003D61EB7ADCE49FB2D339AFB74A9F1A168F
-:10825000AD57FFD233693DD21D1B777EF19E294F6A
-:108260005E48F6B64E5F8B047D2DD97E01E9834BC7
-:108270003CDDF4C5EB5BB3E83CD15889C5B423F1D0
-:10828000DE0FCC4BDF097485E708F77DC1F3C777B4
-:10829000BD98984FE751596047F4BC76BD7CE30820
-:1082A000F2B71E4D3E2F78912783A85F310EE74B22
-:1082B000823F66B526E50BFDAE05FBBFF1B7DB4F90
-:1082C000FE09F1B3F7A9AD77629B82F3C30713FBF5
-:1082D000985FE001F631B27F3A99CB6F8F61FF3C36
-:1082E00023F4AF3B2C1AD925672DC5227F9DDB21B6
-:1082F000B2C59F8A79DCCDAD721CE2CD8B068B2E88
-:108300005F4027F4E23D8CE2FE7C07D8672384FCC3
-:10831000F9C3DD9F16D671FF8E41AF2B38546AD05A
-:10832000E78AE11FCAFB8B37066AF14EEE5EF5BAAB
-:10833000B085ECE17F54BF7BF71F94F7273D9CFF8E
-:108340009B73B8FC6E0EBB42DC6E60F9A8EF35790A
-:10835000F97E7025E68900FE6DD2A91C07FCFEC9D6
-:10836000DD6756364C84E5CEE6F8C03AFDFD95361D
-:108370004EA7DDFADFA1E1FCEFCB8973C005E25C1B
-:10838000B4199E02E02BBEC9BA0CFA63F8F09774D8
-:10839000CEA52951FDC304D4E7414F41BE772A1D24
-:1083A000B68418F37B16E527D0F7382FDF3F1C2D56
-:1083B0003C0EE75035BAF7CCE9F38D467B496FFFA9
-:1083C000B187EBAD8B0FBF35D806EB74D2F2A21795
-:1083D000E308E57B767AD14C1E1517F07A51AEBED4
-:1083E000F9EA581FE55B6D1A8C766D7398C72746BE
-:1083F0002A2CA8C4B8B7B972433E5DFE5DB121898D
-:10840000CA0BD19F008F2AC37C9EA75A6A63DEDB0A
-:1084100059F9FFF60EC0757BAA1F3F2F35B2357F85
-:1084200021CA3F84C50A72EEC92F46507F43BDDC86
-:108430009E87F1157CCE58C882F71D3D25ECB553BB
-:108440005FC8D44EEF7764CB24D9076B991B6E3C81
-:1084500040F661AB5DC575766EE1F7C1395B9D2471
-:10846000F72AF75DC1EDB8041EF76C7275FD599CD3
-:108470006353314FD2E96B6489D07F938DEF8F17AF
-:108480000203EC74479EEBE3395B1FA0A4764736EA
-:10849000BF57CFA934B24BDDD178F710FC8582BE2F
-:1084A0009A5C610BE6ED74E15D950457044E46E37A
-:1084B000EA705E48FA7C93ADEB7D3C7F49E7EB5474
-:1084C0008483C3C95A2F5051AF70FA78FCD6E95350
-:1084D000FD41A9275C95A340CF057EBBA78645FE3D
-:1084E0003E06E6B1B9227507F044532613F761E55D
-:1084F000D4A37ED15D4781342EF2FD8FBC23EAEBFD
-:1085000026929D1394D1AE87D29388F3E4FC85F72D
-:1085100017F4CBE378403F719C83BFEF6E0FF4EE0E
-:108520004EA47B8DA99D3FDE177795C4BAEF35D554
-:10853000FD4EB74BE1F72F43FF56F8C028156029D1
-:108540007FFE39A2DB324BEBFA912A9E4B0CCCF723
-:10855000C278BF7EDB827F53917DB4DD49E79073A3
-:108560007EB389FCD5E6FEEA8FD6DC8B79D99DBF38
-:108570009154CC03EDB47651DCA8A2F5033AAF7860
-:1085800045CB313AB765890F5462BFE35A964F41E4
-:10859000FC8D678DB5E8DF03794871FAE6542E3F0C
-:1085A0004E1F19B6797914BEEFF70ABBB02B300411
-:1085B000F9A655F0E73ED46FA0DC23F4AC3DFB7F79
-:1085C00098157D0E2BC80E903FAC861DA2FC42FD77
-:1085D000796748A17360235E77DCAC45D1DB2F045B
-:1085E000BFFFC2CBF5A0ECF8C00A84B76CFFBB3666
-:1085F000AF8A79ACCD8351EE36831E76AE7CC64A07
-:1086000013DF74E7B71CE7F772C3BAD6C5C33A3DA8
-:10861000F57ACB70FCBB22003FA3FBAADEB493DC4F
-:10862000DC93C1F96FF96B9F8F42B9F5F9DEB22186
-:1086300088AF3BBC3CEE0F743ED985FCF40C23396B
-:10864000A6F3632EF223809EEBE37E945CA473E496
-:108650003F5B3BDD03DAB587DF0B01744E740F74AB
-:10866000EE43FD22D707744FDF5F40FCDCD46EE1A0
-:10867000E7C0418E0FA5FA64CA57696A9FEA237E54
-:10868000B6006AF3902FC307A89F667EE76D81E965
-:108690003ED78F3149634C443EFE9787CBFFE61CA3
-:1086A000351E6D84385936F041D43EC9EB621F95B2
-:1086B000E26FAC5F878946ED625F107AD73EA1E733
-:1086C000B2A35CDEDF26F6B225BFBBE4DA1D30DFE5
-:1086D000252FC95CFE0B3A3920F4E043D5A954C7D5
-:1086E000FD4285751A0325DE773756AB9A82DBCFBC
-:1086F000B8A2C683585E52DC3C058F4C4D9CD57E9B
-:10870000909F61D34620FDED3E70E508CADF7DD322
-:10871000CE304571F7975D7F7E12F351F701FE630E
-:10872000EC4BE89F6514BF29267AEC8D6E3AA58E36
-:108730006B26F8613ADEF22B14D8E82B9030001F3C
-:10874000AF794BEB8300D00FE3B5A3488F77FA02E4
-:108750005476BEF2650ACAF43D47DEF5A2BCDF6D71
-:10876000D346209DEDCE047B20067DFE4ED04F41AA
-:108770002F79155F7A797EFAB020BB0BE9A762B733
-:108780004C7FBFE0E46E59C373D8EF6B8114D47390
-:108790008EB3E0CC09B8BF0BBB763E473B9B8F7ACC
-:1087A000CB28BA2FC3606732799985EE7B6F95C865
-:1087B0003F5162D243CA59E3CA81B86FB46EB2E185
-:1087C0003C4AB718BF2F47FD651496E7B657BFF46C
-:1087D0000AFD258B65A1FE02F443FE89AED764FF36
-:1087E0006646F93D6D98DFF39485E307E425F1A132
-:1087F000AEC73CE1D34EA05E7DC223F613618F76F7
-:10880000354994DF7FE1369E777DC9717513E3F3B7
-:10881000A7BCB01221072F5178FCE2922359140F04
-:108820001DA731F2872C68954288C7125DAF13E708
-:108830002960DB25BD6E3C0BD5E2FD720BB7497498
-:108840000EA36C9BD17F5FBEE195C3681E2E6E3672
-:108850009D8F177831C73776E22F31E21B83E3858E
-:108860003F67301B6C386FD5767EE7AD3E16E7AFBD
-:108870005F15FDEBED26C473BAA910F32D0FC921C6
-:10888000F1F729DD987F7B8BA08F5B047D54B2B01C
-:108890000DF3F717AFE3F3656BAC867B8B17ECBE7C
-:1088A00095CE2398E9A864078FBB010229BE53B275
-:1088B000D1F8BE54E0A3D4848F8A8064828BEBDB32
-:1088C0003DE16A9E89EBBB788795FE4E8719AE33F2
-:1088D0006C36E511FDB3E133AFD375FA3A0D67C3DA
-:1088E0000DEB5474EEFB0922F68D51FF7DE6F0701E
-:1088F000CA7739DD9649FE039D3ECCFD140AFDF989
-:108900008A0D5CCF3CD932256E24DA452F2A7E09A8
-:10891000FAC97FE9332F9EF7C8DB2B338C0B76B671
-:10892000E6DF85E7B477B5655F87F751E4BDA4D08E
-:10893000BE91FF521EDD0B92F7525E5C16E551A808
-:1089400049880FE887F6DDCE17B3FF988BF2B36D39
-:108950006A01A279F98B7971A81FEC62DC1F21BD35
-:108960005490D411B58F94C773FFC0CAD4F7EE41A9
-:10897000FDFD8A67F8DF1FBCC2DAF532E61FEC6A3C
-:1089800053FCCBA15EFED2DC1ABCA7A27CBBE447A1
-:1089900035FB70FB92E41F219DB55A7D7682F72747
-:1089A00007F07D708744F78557EEBD7C4413E67968
-:1089B0006FCAF7479FCBCE4B50EFC3BC4A961647C2
-:1089C000F6F71583ACB49F9E1810F718DDC7A26D9B
-:1089D0002A44397BE2B95D363A37D824B15498C875
-:1089E000E1D4834FD3FD1ECFBE42F90A5376BF4276
-:1089F000F909BDC9FB93219985C9EE6EA47B611667
-:108A00006FD2EB1D740EA258E84D155B8E51BD144C
-:108A1000F57F18AF74A31C52E1D7837B7F4DF90D0E
-:108A2000153B787E03BC27F9538AF1533542E7732F
-:108A300019A783B942FE94317ECF5059233F47A7EF
-:108A4000DF8BA4D3F9FC1D73280FAD47BE19DA974D
-:108A500014876824FAEE79DF10A7EF1EF72499E84F
-:108A6000FB573A7D5FC82E44FAFE7C12CF0FFBFC09
-:108A700015575C2ECCE7F31764CABB3F079DD37E26
-:108A8000FAA2D8FF4F872DB43FE9ED4EB57C4AFBE3
-:108A900048E58BA76DA8AF16B67E42EB30AD75FFEB
-:108AA00054C4F3D52C508E78BBBA35CE877C3EADFE
-:108AB00083CBADAB5AED21F4535FCD9AEB707D3B88
-:108AC000F73D519788F4F238A7175D9E2D14F85C96
-:108AD00028F0B950E1F73D95E6EE5F8F6ACA558CF4
-:108AE000CB9BAB9A85BCD968C46FA7B55921BA197D
-:108AF00029B1C68C9EFB5D19EBA0738F9D6923E89D
-:108B0000EF4906C15E453DAC7C87390ECEEDFA0AD1
-:108B1000D37E7A205EDC67F00DEFC178D7B42ED318
-:108B2000BAF87E7615D013C643DAC235B928F77481
-:108B3000FC98D7A54DCD8A3FD779E79785DEAED78C
-:108B4000AF15F74C34FB1ADDD176F8153EBE9F9475
-:108B50008E9783B8AEDDF64AF6C151AA2562AF8082
-:108B60009DF2657C3F6EB78C86AE9F4F97597272AF
-:108B7000C45EA94FBD6F5A5E32DE1FC1E5C5A97143
-:108B8000D01FE60B288CE454E50E7B08ED0C3C77F7
-:108B90008476C07F03EEF3D8290080000000000037
-:108BA0001F8B080000000000000B8D577F6C14D74E
-:108BB000119E77BBF7C33EFBBC87CD116AE2AECFF7
-:108BC000BF3018B3312636A449D62E6928B8CE193D
-:108BD0001A429BB45C4814D284B351845C242AB1F9
-:108BE000B6898A42AA466AFF88AA28DA448A94A8E3
-:108BF000343A84514C655BE7C424B6532408D0183A
-:108C0000D4B427FEA069656383149C5691E8376F3E
-:108C1000F7B833366ACE92E7DE7BF3E6CD7CF3CD50
-:108C2000BC778F0E5EF7A5EB886283E21182AC2CD5
-:108C30008AFBB4A5441D44DE9246C80161A40872B3
-:108C4000D3755FBC8068BCB2A2280EBD1BAABE4C07
-:108C5000C3F8167F1ECECAAEAF15A262A24E48BDA3
-:108C6000383BDFA9A67DACDF39284C1BB2FFC3FF20
-:108C700094951712CD0CCD953D0DD9A8798896F213
-:108C8000FC0F57AB3877F6929FA2E538D8322FD039
-:108C9000FD44CF91F3D9A3111D5882F1E80B6D5417
-:108CA0008F0971B8949A61D74B460AFB3A2F2A86EE
-:108CB000A563FE9497A889A8E7B33F8F2E2921BA10
-:108CC000F6BE30FCBAB3FF570D18EFB60F2F81FE7A
-:108CD000CDF7846141FDB97B881EC2FC9ED7BD578C
-:108CE000D201E7AC5BF27FF2CA41E8258E05F4576A
-:108CF00030EAA1DE52826E2F1D963241AF5E57429E
-:108D0000B037D0E7635CC8CED91F257AF1DDF9F61C
-:108D100012A466C788EFC0DF5A3A4673D61FD50A39
-:108D20004BAE06F1A5966A6F29EC7FFE5181F36781
-:108D3000C615CD2F246E6F7E27179F3180B19CE71B
-:108D4000F34C429C33E70AEC3CE8FDFB10D66A8802
-:108D5000A60EC1B81F769A158987678323570F7FA0
-:108D600010E57C32FEF135447F1CFE6095C9FE9310
-:108D70004DB49EFD86DECA1CBF93702AC74FF865AE
-:108D8000A4705ED75F1503E6D9AF6A5F49D6AF938B
-:108D90006A3A64E4F063EE90D9315A8574890F65BC
-:108DA000BE3C6254CADBBC39A5C4ECBAEC18F1EC89
-:108DB00032B1FF27CC0BF843EA6C24063F7FA6E9CB
-:108DC00092273D834E7E3D438EC4F93B8871C19806
-:108DD000CF5FB0DE6AEDE5F59BE541B218B7AFAD08
-:108DE000361E7747157A05E3EECF5EA8A19CF3897E
-:108DF000FD447EBBBCB311E66DD7398FF4AFEBDC1D
-:108E00008D4825C65BE8AD4D1AC65B297998D73FDA
-:108E10008E069F675E5B7CEEB2AC9D2F8B14C77F86
-:108E20008E17F62CFABD63D78DB797B6491C7A5DBD
-:108E30005EED2E72E23DA8C5BBB90E67CEFD37824E
-:108E4000B0E9E4852B21CE5726DF77D6DD6DBF71E3
-:108E500002E373B3453FFF2478D030AE5A4588F320
-:108E6000C4649EDDC6B80CEDF9C741CEDB653F7129
-:108E70003D740FEFA921B61B8FAF8DA10E6F0EFFB2
-:108E8000622DE340A257FA65B17FF06B7AE062444D
-:108E9000C77C62E86284D71327D7FFCE82FEBA333D
-:108EA0000D5B79FEC4982AF9D770A651F2EFC45F22
-:108EB0001A8B2BD87132826C3731AEC6189FC478AA
-:108EC000E3A76DD04B9C696D147CCC99C662EE3FD4
-:108ED000EB04C5925817E395729C89E7379A22E311
-:108EE0009919011F302F28EAF0872AE7F1676FFFF1
-:108EF000691FC7B1774031737994D9F796A64A3B79
-:108F0000EF307F806F4F5298921FC71DB977E08472
-:108F10008CEF456F52E6BBE798D759FF9323895EE4
-:108F200093FB2C5A62311E9FF214F2B0C567AF203A
-:108F3000B838514E3B938BF4C3AAB090FB262EC594
-:108F4000BFCB7C996889D768750BF52C6A95F19031
-:108F500070F1EEF76EB617B157E1DA0B15D3AED854
-:108F600022EB5AD8E1CF161FC517F3E78B4C3D1102
-:108F70001DF58017E7DBBC1AF39FC82C588E3EDB2B
-:108F8000EEF6D9ED3FF29ABEB55827ED741ED6DB4A
-:108F900033FDB619FD0C7D21863FEE6FB1D76345D9
-:108FA0002940DA61CEEF73DB28E6A50AD8D93C7FE9
-:108FB000FE71EE97F52C5569E76E7DF022F7C1D56D
-:108FC000F8524DD5DC074929080AF0E6AB31AFA6C7
-:108FD000487FED4AEE0777C697E9331FA3FFE9E81C
-:108FE0007F63E87F2C7B6A3FAF4F038F89914BEF04
-:108FF0008765FFCCA32813F01B5847DC09CD3DFB48
-:109000000E7B3DB7EBF3C7F3F896C9CF34D1E664D6
-:10901000DDC2FC5C77EFB34460CA07B25217ED3B88
-:10902000E2411CAB14877F7E6FDC2C451CDE8196F1
-:109030005429F7D35A7451C437FD88B0B9CFC3CF80
-:10904000327F4E9F9F5E2EE47AF70E615BF83A52B4
-:10905000FBB9BCB713A9B33EE65375FFD32FCBBA08
-:10906000B5E80245B2797C2CE0DC97B7F397899795
-:1090700017758E0F7C96FDB8444AD6E7FBB1DDBD6F
-:109080000F1F6B9E9FBF1A3AFB8352F8F184290C85
-:109090007BB1BCEFBCEFF452FAF6795F158E1787FF
-:1090A00081C7CCD91B3BD6C0DE44ED3FCBF81EEDCB
-:1090B000BC0B7FEF0D3BB8760543F55484EE52A30D
-:1090C000F7A581C7F1C2F80A69C7F34D6815F1FE2B
-:1090D000F49B2F09CE0749FDBBD54B855B2F15614E
-:1090E000CDA98B125AC7BC7A4F73C6135E7B05F7A6
-:1090F00003AAC36366C3FFEFBB3DA73EA9E7BC5C01
-:109100001B19AFF7E5E46FEA25D43DDF23431F4584
-:10911000F4825C7E795C7EA9520AB1CDBD1FE7F373
-:109120006D8AF9C6F93EFE51FB93CC93FEED2542C4
-:10913000CFB93F4F9E0F55E5D89D1E54A43EA9E9D7
-:10914000EAC70B73FD7C59FA399D74EC11A5ABB7D6
-:10915000AFC95DEF73799B96BCFDF5CA7D31AEE377
-:109160000C6F557278DB39D041F23E72E34EFAF063
-:10917000057E59C37EFB1DACCF7867CBC23975F134
-:10918000AC8B73534A483E6E204B61BB4DB0F81414
-:109190008F554AA9900F504ACE13AD20E6F1FD2E0F
-:1091A0008F9BD4D488A8977A960A5E6EA4B352EFA8
-:1091B000219A95D2243478C85632A46C0EA4B67283
-:1091C000FBA84B2615E6532AA286AF828FDC4A16EF
-:1091D000CB5F367E95AE66F809653C6E76C516E9BE
-:1091E000D7BF75EBDCE0B71AE7799AECB731F52019
-:1091F000A5153EE40195362B88E7419502F9F0F775
-:10920000F8A847D6EF705AB7B97F19C5EEBE7F618F
-:109210001FC64DA653A77CD53CD5908DF74E1C3666
-:10922000C25E11EBA974C42B714CC9F31E66C71141
-:10923000770BE92A8F7BC3E56E9F9FFD399FF3FD76
-:1092400041BF7CE7780296C4E3485897790B02CF78
-:1092500010EC6C7C4DD024CE352A9C7833F637E266
-:10926000D557D4C0FA42EA634C93980F069C7D44CC
-:109270009B34C64BA4229E5BC16F8FEB4C84A4DF52
-:10928000A16766AF1D94EF36BFF6365C32063F9994
-:1092900014784F0BD3A403EC4FA020C5EF6BB06341
-:1092A0002AF75DFD4678F71FC2F047E89AC48BE2C3
-:1092B000A4F33B6319BDA1F1BDE161BD6207BE2FFF
-:1092C00081DF136EBFBB9CEFF48D77ED6DBA07F9AC
-:1092D000D8591230381F0D81B27504BBED85716904
-:1092E000F7B23856258DA8F67AB69BE17990CC6610
-:1092F000C659B8F93A1070ECCDE539926B92F91C69
-:10930000443B0FC0AFA3A88B00C656AB936FEBEFE7
-:1093100079761FCE9BF3C424197FA91801C9F76879
-:109320007CB209526D35F57D05FC64471CC16C1C8F
-:109330007D7C0EEE637A160F449061BFE6C4D3576E
-:10934000E059C9BF97FA28DFC0E388F6173A3CDB3B
-:10935000FF459E4DE50BFD1BF1C74738BE398F31E8
-:109360003921EFD17D4DDCEF18A7EF6570F2647104
-:10937000DA6947FBD2BAC4658CFBEB7D7EFBDE1459
-:10938000F6FDD46F57B1FF193C90204952CDC53935
-:10939000838FC6F9631E9BC85F26FFD12C4E47F30F
-:1093A0001D7CF0F3CDC141471ED72C8C3FC3A3FFDA
-:1093B000010A95CE3EB00E00000000000000000043
-:1093C0001F8B080000000000000B7BC9C7C0F0A382
-:1093D0001E81BDD0F8E8B89917BF3CA9588601C1D5
-:1093E000CEE6626008E060600804E2DD40BC078809
-:1093F000A539191842803814882703F95380380793
-:109400008893816A1B981918B6B13130EC05E223B4
-:10941000407C9A8D74FB9F8A3330A4C920F85B800E
-:10942000EC4D72D4F5E3281EBC38C600953F4713B7
-:1094300095BF449B81E12E929AB99AA4992F68C84E
-:10944000C02004C4008B7A89656803000000000016
-:1094500000000000000000001F8B0800000000005A
-:10946000000BED7D0B7854D5B9E8DA7BF6EC994921
-:1094700066263B0FC2248664E70501031D6288400F
-:10948000D14E5244B4D48E685BF478740848781393
-:10949000F09556BCD9900709093058AC81224E107E
-:1094A00011156AA4F8AAB40E88163DB64D5B5BD1BF
-:1094B0005A1B11410139296A9D5AAD67FDFF5A3B7C
-:1094C000B3F7CE4CC0F6DC73BFFBDD1BBF8FE5DA14
-:1094D000EBFDAFFFBDFEB5462645442A20E40BF860
-:1094E000FB1A21B9222164423C254452FB9C901274
-:1094F000ED8B62539E7C613B9FFC67A3CC798D9082
-:1095000061907E9F906C426EE365F42F00F9A93C58
-:10951000A3CF474F895F26D1B2783F5309CBABA287
-:1095200040BE10E0ABB95C1FA7C1E91D47D208F9E6
-:10953000C4C552AD861655D2F42D57A4A9901097E4
-:10954000102A66EBACFF4A702CA61743DA24905918
-:109550003DEE04F320AB195C76E788A42A3E7F6BCE
-:109560003D3D6D6A24243A2A9EB749FE288C4FA6B9
-:1095700010FF8309DA4DA4EB40F8B88904F0903964
-:109580003CDE154213E1BB9D04A2365CAF9FC03C9C
-:109590000F78AA8E84B208E99C22FB1DF079530E45
-:1095A00081797975B8CE2AC0BC0C799590AFC33F4C
-:1095B000B8DE685B319D47AA5F246BE9A7A69C0AC9
-:1095C000271D93AC9FF4575F88A6A9520F512075B1
-:1095D00093404FF9E0790689C8F7F12E723E70B0DA
-:1095E000EE8F1DD680ED6947D9F1F96EB0D379D1F0
-:1095F000F568134402F0595739332D94601FF47401
-:109600000DC0972EBCA5D18969D3C49969A41C7AD1
-:10961000EA9F05705E3F295B5C2BC4E1A2C3E1C0F9
-:10962000A4179D7DB45E3BDF9F4EDF4127B46BE7FF
-:10963000FB6E85DB7A800F2DAF2102CEBB6558CA49
-:10964000AC4802B8D4102F96AF77D176B08E1C12EA
-:1096500079B010E6D3D73587E6BD13950A80B715E4
-:109660007FA60E93B0BEDB4D220EDCDF803B8796DB
-:10967000A71236BE3B8FF8A3743D2EB7DBAFD2BC2A
-:10968000345124511DE6F8EF72D33E7849BD835022
-:109690007A4D9D326F061947F36AFF1118DFF9A65C
-:1096A000C31F800AE532B657E87F5F14D1FDF8DBAF
-:1096B00087584EDE16FC0FC2FC767078296C7C67EA
-:1096C000896C1ACFFEF93541806F47F98A9455426B
-:1096D0007CFDB2719FE9BA6D96BC7DECCC6F15AB89
-:1096E000C9F7D3DEE725D18B6865DB0D43EE7BC37D
-:1096F0009BE32F3D54169FCF8F8827EB3800EB62FA
-:109700007231D2FF39DA7FD2E8BFF4901DD7291A1F
-:10971000F950B2FA6D1CCFF47C7B21C513C4B33E63
-:10972000DFD563E3DF5FE5F841B46AE46F12DFBFC2
-:10973000F64B48BF8DC2B769ACACAEA67090DC7278
-:109740005418C7C6ECAF02BAA67FF0BDBCB557F03F
-:1097500042E636137F6C29BE8A328EE4F393B2CC94
-:10976000FBF365E1F73CC0EFC238FCEC249816052A
-:10977000BC0DFA103E1E7D1E977C478DAA09E0782D
-:1097800031A53B3A9E3D2B42128DABF341BF10F801
-:1097900035F01F9BEC47BE4526CB09F9A05D109123
-:1097A0004FC5E1EC94101F09FFDB1F42B8C30C9DAD
-:1097B000D91C7E8097252FFE0DE027A9249AEAC5A3
-:1097C000EFCD5205A5039568A994FFCB129120FF18
-:1097D00029007B02964F9533804F4CF38780FEED36
-:1097E0007C3C65B6EF6A4F7C3E9FF27D8D97877C0F
-:1097F000DF3695DBD97C3D9C7F28734C7831D03E99
-:109800009DB5B7AEF723C2D6FB29A547863F737C2B
-:10981000410FF4434CEB6E516F08D6AA280F3E85DA
-:10982000FACD5F09F4CC017AE5F2C02A5793F263CE
-:109830008B3CB5FB0C79F84731E05311FC9BA7201A
-:109840007D11AB1CE76960C43F270F69CB4472767A
-:109850009C203039A565E1FA753A225C4FD0F79B20
-:10986000F27593FC90613E94EFB948043B4F25514B
-:10987000CC7B483DE63F9E581115683F0EA9AF0DC1
-:10988000F89783F251AD70F0F81BB83C49B68E0DD5
-:109890009724E6FFF9807C80DFEE7A1242BCBD415E
-:1098A00001BA12B410F902E88B84B9FCF5FB60BF71
-:1098B0005A1B1BC83BA584A41CBC8EA863611FEA6D
-:1098C000038172D04B6815CA824949254B25BF6A6E
-:1098D000C4C7817D24ABF87841A43B8A17970AD08E
-:1098E000BFD38C3703F85142896E12E6D560C2FEB1
-:1098F000F87EF27A49F16760FFF5F5A832E2AB0530
-:109900002F5C958A00A84DB3BD309FE17C36C343E0
-:10991000ADCBC571B02FDAF49174ADC3FB66CF0047
-:10992000D1E979F38AF7415E3597571CAEA1FB94D4
-:10993000E657AE9E4653570911009E6DD0592EF43E
-:10994000F7A2564DD7DB049DD1FCF5AB9E0D686E9A
-:10995000861E66BD5254251D5F8A86D44B842F1CFB
-:1099600083DB275BBFDD22D70859717E7AD00DAC2F
-:109970009D46FF03BA4AB7F4931630F3710F31E4F2
-:109980006979F380DEB4FC7F643C85AC76AA14056B
-:10999000EDAAA844E8D869444997286AB8A64A2499
-:1099A0004AF34A567F4054CFBD2FCD844C677C3C50
-:1099B0004C8C78BC99D3B9AFB6B9B095F6FB71A50C
-:1099C000DB0F743E9CB2C1CC8CC1EBE9B0C8E18E18
-:1099D000F2BB11EF9B88E62C02BDBE5C44FDA54D99
-:1099E000DDAB18E5D0B33A3F19841F4495AA9035F2
-:1099F000207ED85431E0F2FEEBF861D57BCE173FE4
-:109A0000526F30EFC797DDAFC3801F13CE1F3FFEED
-:109A1000D5F1F47D4DC6977CB5B7A25DB1266F68D0
-:109A20003D7EF0BEAE46FEE952492092A0DD2F05F4
-:109A3000C12C7F8C69B6515EDC62DA2FA960DA91A5
-:109A4000EE21E021A91639A8F3B1069B7A2C133A2E
-:109A50005050DE38797FEDEADD1AE8ED1FE7018628
-:109A60005079125E1E1540AF2961F61D742002BDAB
-:109A7000A88108DA212097E8BE38F8FCEC3EB31E36
-:109A80006F5352CC7ADC2C4D30CEDFD520E33C9C9A
-:109A9000301EEDD741ED0518D79647A22E6F1C5FFB
-:109AA000612866AFDF795E78A0E32B8095E1ABB9E2
-:109AB0005DABAF22A15E3768BC6BCDF34DCA97ACEE
-:109AC000EDDC927ADCA06F246F2791E306BDC50719
-:109AD000B2C5B0FFAD76F2B440F5BC26DF77349C5A
-:109AE00037FC9303FC89A03CB3E5D490900A7252F2
-:109AF00065EDD40C265F7709267B5BFF9E7C1E6C90
-:109B0000BCD8CD84F482DC9154D47F93D56F6AF4B1
-:109B10007D55A242C8DEF0C06489EE5FF3AAC0ACF6
-:109B200020ADBFB671D764F8AED7AB11454EBF5468
-:109B30006C56811EC3F196D07A4EFC4ABE00FB885B
-:109B40007266D580472ED233592AC3AF7CFF883046
-:109B50004007B4CB25225BAF833C8DF5A023A847FB
-:109B6000B938CBD386906FB10702414A776BA5888D
-:109B700073054D5B5C3CAFF27C3ACF2B3C5FC8F386
-:109B8000643BE6ED32CDD375A5D8230AE65378BE03
-:109B900090E733783E9DE78B785ED88EF91699F57D
-:109BA000D721F5B0FE53785EE5F90C9E5778BE8854
-:109BB000E7C95E36BE83E553ED3DACFF549E2FE40E
-:109BC000F94C9E4FE7F9629E17F6623E299F2C637F
-:109BD000F08FF305066F1D0F09C0D5E4E78A5AF22E
-:109BE0000C5F32058687B16FEA78E347FE48DCF9FF
-:109BF000486FC3B9BFA1E906E66F20DC3F62F87E7B
-:109C000058057E334BF40F455F8F707EBA8BEBB1F6
-:109C10003B1B15D4BB7734FA30DDDEA8E2F748638E
-:109C200019A6DB1AFDF87D6BE3444CB7340630ED22
-:109C30006A9C8EE9A6C620A61B1B6761FD0D8D21BF
-:109C4000CCAF6B9C8F6947633DA6ED549F85744DE7
-:109C5000A386694B631BA64D8D614C7F7843C54B32
-:109C6000A0D27EEC1651CE279BFF85BB44131F1E4E
-:109C70001D31F3C5515D19A67C6938D754BFB8AD05
-:109C8000C8545EA88D319517345498F223EA279B67
-:109C9000EA5F30BFC694CF095D69AA3F2C38D394E0
-:109CA000CF987ABD29AF4CA935E5BD950B4D797795
-:109CB000F90A53FF2925DF37E59D79AB4DF53B5C6C
-:109CC000A19F8A942FC8596B4DF524F7DD6679352D
-:109CD00023EBBCF816F948CB06BCD2F98795DFDB3D
-:109CE000F2492080728BC99726C05BF0678D209166
-:109CF0000705F0235D7E18FC178E1226771C83E47F
-:109D0000A6B93FD9BDF38846C7A9F61EF6F519E8EE
-:109D10008C18ED4ECAF7FF2C32BFE2DABB989DDCFF
-:109D20007957627B19393BADD7F979623FED9F4492
-:109D30009B452F60764AE75D02D6FF57FBD7CBAD38
-:109D4000FDC6C7A37B5C65B05341EE4F60FFA7190A
-:109D5000F4137B5FFA1CB07B743BD6C6E9BCBACC6B
-:109D6000FF763385778B42FC0E9A6F71D710D02B1C
-:109D70003E5618DD931DF9686FEBF507CFCFA0575E
-:109D800020FF4931D9FB927B26F29796ACA1F532A0
-:109D9000396623512AAF6C3101FD72B2149C5E48C2
-:109DA000E9577ED5E65F45505E26B4DF09B91BE171
-:109DB00060B3E837CD732D7C6FEA085CB75DE76F61
-:109DC0005935F8BD59197A5E0E9817CC87CFCB1E3E
-:109DD0004BC5D41673E17C27C532313F31968EE9ED
-:109DE000C5B10B30AD8AE5603A21568C6965AC107F
-:109DF000D38B621762BB8AD8684CC7C72EC2EFFEEE
-:109E0000D8784CBF12FB2A7E1F179B84E9D8D8D77D
-:109E1000F17B79AC1AD30B63DFC0EF636257603A12
-:109E20003A760D7E2F8B5D8DE9A8D8BF613A3276E8
-:109E30001DA6A5B1399896C466635A1C5B84ED8A49
-:109E4000620B302D8CDD82DFD5D8724C0B627762CD
-:109E50009A1FFB1EA623624D98E6C556617A41AC57
-:109E600003DBE5C6DA31CD89FD00BFFB621B31CDD6
-:109E70008E6DC6343DF600962BB16E4CD3628FE2E8
-:109E8000776FEC614C3DB19FE07777EC714C536399
-:109E9000CFE2F794D83398BA62CFE37767EC00A6A5
-:109EA000E7DA2739CFCCC76D5929A6FCC463663ED3
-:109EB0005EF5A6998F57BE6AE6E315AF98F9B8FF2D
-:109EC00090998F8FDB6FE6E3E5FBCC7C7CCC6E3327
-:109ED0001F2FDB61E6E323B75E6FAA5FB2C9CCC771
-:109EE0008B3A179ACAD566331FCF5FF97D53FDBCF5
-:109EF0005B579BCA7317AF3595FBE69AF97736D94E
-:109F000062B6BFA76E37CB91298F98FA7357EEB51B
-:109F10009C034490CFA494FFD4D4CE597230A15D59
-:109F200063F57F0348244ADF779014FF5A61F07E7F
-:109F300066707E90097447D32C4E77C380EE689A82
-:109F4000F18DC5787EF4C937DB7E416D4392710196
-:109F5000FD673274BBA12640BFB7E6E879A209903D
-:109F60001F4198DF80BC5F8DE5852CDFD574AC5A2E
-:109F70002B477D9EFB154E57835FACD5C5F20FD99D
-:109F80005E59057E858CB440AE9FA63BEC89F9F8FE
-:109F9000633619E1714A0C6CB3D1F5FE6775DFEDDC
-:109FA000E00FFCD411DA6EA3DF173B4305E06AFE35
-:109FB000C01E7A4802BE48020FC0F73412D861436F
-:109FC0007E6DF67B36828140FBF98B187C18CA3394
-:109FD000AFDA857691BEEE56CFD0F3B9CFC6E45254
-:109FE0006B3A41BB51BB4746798A7F55713FD5BD1E
-:109FF000A9DE009477DE236F87F320BB3F9BC9095E
-:10A0000062911F9B5A9783CBD101FB6933FA3D7B49
-:10A0100031F5927EF47F2A441120D5D73FB0EE115E
-:10A020006CDD141E87603D32F84B697E75EA55136E
-:10A03000613D141E2F7078BC681B961C1E044E0ACE
-:10A04000AAB82A01FFEC164CFEC7778550AF8D9D4C
-:10A050005FE27C54CD8F707BC4C6FCDD3AFCE8DF48
-:10A06000AD19BA3F86B53B82FB60E94FEFA7D7C673
-:10A07000C7E7F250C7E34C918412C1BFA591F99F85
-:10A08000C9AEFC2FE5AFFECC2E261CC72E05F19CD9
-:10A090007410DFCBB2D8F5592138D385F38784E724
-:10A0A000A99364EECF900ACEEB3C4AF79790DDF986
-:10A0B000E755FF217DDD70BE908DA063FB74281FE6
-:10A0C000F3A5BC7D31D7EB9EFFD353D125940F74FC
-:10A0D0005230B3F348B33ED7B949C473F4E2114CDC
-:10A0E0003F6CE07A80839A0DAE710639DD69D60B3C
-:10A0F000DB7438EE37C3B19822F44F2BE8FFB80B6E
-:10A10000D8FC14F37A9AF5F55AE6D152EE2746BBFD
-:10A110005B1A1B1421EFD8C4E6611D9FF0F3035DA9
-:10A12000EF75B8B9DF4429C07EF571ADE310DB4AA5
-:10A130003C1F4AAA8F58C7F992E76F174989CF2F5A
-:10A14000E9FE209C4AB87E441AE81FCD8FE4F3D77D
-:10A15000FBD3CFE1F4FCF37FAAC3F3EDD6702DEA75
-:10A1600079AD3E26A7C967B477E88F24C617FD3CB2
-:10A170007C0DD88D60CF95D438B15D568169BF5CB8
-:10A18000A59B9C008F66E56E05D2B565AC5ECAE8FE
-:10A190001DFCFB76FCEEEAAA3F0CFAA28BEAAD129C
-:10A1A000C07BC4AD58AF595981FED9942EE6B74D46
-:10A1B000E1E5B925AB9D10A2911B0E38A11D5125DB
-:10A1C0007F29B4EB0A4F2F027F571BF14B6C0A4ECD
-:10A1D000D8C7ED1C0E7925520DB4CB0B6B9A0BDB57
-:10A1E0009100B4D3EB45F87AF3CBC45570AE901F11
-:10A1F0008E846BC04F574FFCA5F8FD60B4D0507FE4
-:10A200001BEF5709B3F993F9AC9E5EBE95F7E70EC5
-:10A21000D7F756433F9B58B92FAF12D837C9566B63
-:10A220004598CF3A8EB7CE424960E741ACFD161D46
-:10A23000CD2CF45E1A66FE4EBD5E179F870DBE974D
-:10A24000C7E97E0DB7E7F57A3FE4DD8DB4B40FF3CF
-:10A25000EF8E4AD6BE89DBFFFA7E97CACC2FAEE3DB
-:10A2600047327C256D067E060BD452CCF9860C93C2
-:10A270001D47EA73CDF9F945E6FAA131E6FCAC0ACF
-:10A2800073FDC06453F92703FE92880BFD22DC5F47
-:10A290003292D7D9D2C5F03CEE8FEB7319ED8B3CDF
-:10A2A0005E6F5B3D8B7369729F5F5C4918FC16C8DB
-:10A2B0002C981F46D1FB69ECC2EFAD81DA141877F8
-:10A2C00067D7D0FDFD84D3D5E39CAE1EE3FBB787F3
-:10A2D000EFC7A3DC1FF330F7C73CC4FD310F707F1D
-:10A2E0004C37F863E8F7FBC11FE3003F4D10D32D57
-:10A2F000E08F413F0DF3C7FC90FB6336803FC60102
-:10A30000F8D780E9C6F1E1EBC0CFD6C1FD32EDDC74
-:10A310002FE3B5337FE3C6CB02B950BEE3B2C4F638
-:10A32000AED7CEF024171414CABFF389164D01BA64
-:10A33000E82404CE5B9CAF680137CD8FDEC589640D
-:10A34000BF1648A5F9511196CFE3E3809CC0F8A74A
-:10A35000061617E3C8D3C86CD8A73CAAED50F8AED0
-:10A36000E1F8FA9AC4C68372A41B95F88C7CFB0DA5
-:10A370002170449A00FDB2F9B8422101CA86DFDAA1
-:10A38000AFC9B45C59DC1B80ADF2B6F544C17E5652
-:10A39000B528EA1B1BABFD87E13C6BF3EF6D7EE458
-:10A3A0001D59C4841FB4EF8476757E6C1BEAB7AD6B
-:10A3B000F53CBEA892D5CB4F627F8FD96196FF65E1
-:10A3C0005BCD764F6BC3CC21FDC5C36789167F92E9
-:10A3D000E55C608A191F5B036C5EC9FAF3569AE765
-:10A3E000E32E37F7D7EA1E7A3EAED855A8EF27C33B
-:10A3F000F332B1D66D9F10CF17C72EC5FA56FD4E5A
-:10A40000227E543EA4A97200CE79A5A94A00F45A2E
-:10A4100069AACA533FFF1EE0F920CB2B03E7DBB943
-:10A42000F661087FCBF97680C0F9F3C6D184D917DD
-:10A43000DA9CD5812934FF6D82F6C2EBD2B21A2D97
-:10A440008FD2CB0CA768FB0AE01B8B57D0E3BB3243
-:10A45000E5487B21E5E39B378A643BCDEF080F4D50
-:10A46000CF83E218DC01F4CF14772A1520BE93B510
-:10A47000DBD4294E4F14377031A72F728858F5E678
-:10A480008B61BD2D9D33159067D2B57EB40F88CA00
-:10A49000E6AFF3BFCC2D43EF5FBB65BEAE247E9B22
-:10A4A000EFE9F328637C53C7EFCCEF0F8D5FBA7EE3
-:10A4B00016EB114CFE9D61D706ABED142EAD9B89BA
-:10A4C000DF4DFB69FDDCC6FC64FB597C998EBF4DFA
-:10A4D00081A3C8AFF5F1739568B500F50F4C222A3A
-:10A4E000DDD791EE9088F6E001CADF81FE24AA75DF
-:10A4F000D2FACAFC6880FBC905D87FA5DEAF411E31
-:10A50000F603F806D89BBC3ECA8D7003550F29FD93
-:10A5100037815FB330CED7753C68F271FF3AD53BD7
-:10A52000B0F433BA3EDD1EA1FF8CEC62FBDC3A8C4A
-:10A53000F8719965F5C486FDB0382989EB8FAD9E19
-:10A54000DBF11C509BC0F4026A350704A82769445C
-:10A5500084F1E72AFEB5345BDC350EF98AA4680283
-:10A56000E0DB0C21741BEC771CAF7AD83A38DCACFA
-:10A5700070BF96F3D59424FB9922337D3B53F65F4D
-:10A5800009F6E4E67B287E2788779164D6CF039B83
-:10A5900066A68D56E3F4AA973F6253B19F387DCBF0
-:10A5A0002C4E2F6AB63FFE5FD7E377DBCD7174FF89
-:10A5B0005F8FFFBF5B8F5F3780AFE7D2DBD9FAC910
-:10A5C0002C73FF71FD5D53709E5DAC5CB7073A2C38
-:10A5D000FDEB7ABCAEDFEBFABCAEB793C17A3D9728
-:10A5E0007781D5010AD0516E961FD51A58AD419981
-:10A5F000C5CF61A36CCDE8AFF8C042D792DBAC7792
-:10A600009C3F3F9050DE13FF08133FCDCC1D5A6E88
-:10A61000E872F49311BADE1E427D9A949411A37EDF
-:10A62000B5B3A18608743D5B7DC4CF978EE3E4F299
-:10A630007539FB029A884E0D331FDE3AFFA06B94EA
-:10A64000819F3BDC3D01380F77FB7A217CC9C877BD
-:10A650004BE409C08FAB90AF39D530EECF5DA05F32
-:10A660004E180C57E073BE0CE8D1C25F48B017E239
-:10A670003D8AC7138CAB77409414E5030E3FE34F3C
-:10A6800049F9CC79C669E87113F9F40FF8CB2A209F
-:10A6900022D0879E36C7931385E289213E80BCD79E
-:10A6A000448CF17E3ADCADED9A951A2511BF7B43BF
-:10A6B000085D210F8127563F14B1F067AAB08910B9
-:10A6C0007F583C633AFA9706FC5192995F3B227A95
-:10A6D0001CCBFF2CDF9E2327E6DBC9DA0FC43D7FAE
-:10A6E000497F5D3B3F8FD7E97B80AE2DFD88E53DFF
-:10A6F000A42FC1F8EE7233DC534ACC76C53F802ECE
-:10A7000027C0F97186E9BBE4CE4DECFFE77199B53E
-:10A7100013F56D53BFFB478ABF0B0EDB09E827BA61
-:10A720009CD1FDB10B203E93EE4F2DC46BD27D9C8E
-:10A730004B825E28FC8088D341FFF880FCD67B9159
-:10A74000619F36CBCCFF4EDAEC47E11E901E877836
-:10A750007398E5F5F9D47599F3F3C8CC6C388798FC
-:10A76000B7C94E20EE7001918EF6E9F3A7FA4B3B84
-:10A770005C4CA0FDD691FA56E0672DDCDF5EAB1095
-:10A7800009E206973C755FD56C9A8F70FDE72485CA
-:10A79000BF6A882F5BE88EC8709EF0CEBE8BBEF37A
-:10A7A0005502ED23ADB9103F984E307ED00AF739EF
-:10A7B0006DE6F99D6BFED6F9EAF78692CD43DA2570
-:10A7C000248C73FBB1ACC72D6AE7759FE9B760FCB9
-:10A7D000A23FDE7C9FE95CED5EFB27DBBD29AB245D
-:10A7E000D1FDA973B57B3BC9784B9C7D32F08B655D
-:10A7F0005268BA50148FD392EDC1C0051414D2D34D
-:10A80000E3A370A464A8D7769EF50EC379C779D464
-:10A810009B2E0ED1DF194EC7BFD8FD800CF4F9C1B5
-:10A82000236F5F057AF5A2676D54A6D3F2DD1E1281
-:10A83000457B2322831C5BB8CF867E372245ABAE97
-:10A8400031F05F8C90A5FD2F7ACC8371150BF73A10
-:10A85000223368FB854FBE338E50389C59DDFFE2B2
-:10A8600005603F3C22B03842AD6FDC35F4FB4289D5
-:10A87000DC144CC407399E9F7E267516E091B0EB20
-:10A88000C08DD86FCF77ED0EC339DE5F65764F810F
-:10A89000D6C3F325ED6121522AB0F919EF2BE8F167
-:10A8A0009BA71F16D8FC9EB6475C30BF5DDD728843
-:10A8B000D65BB6EB2F88B75F7F6C8F17E0B0EC6983
-:10A8C0009B89BF2CDB658B3AC661FAB603EFB904EE
-:10A8D000DC02E5234B91C5D074DF128CF75EDAD32E
-:10A8E000F1179B17DA9BE987C2C51F05B8BE66F34F
-:10A8F000CF80FC4F1EF2821D78B2F7412FC095F633
-:10A900003B5BA67875E947063A23ACFF58C6E0FEE4
-:10A9100008E99701BF96F5B4B3F12CF47912FE273C
-:10A9200067B05C18E930CB858FC92B55A818EECAE3
-:10A930004C181F3F201738BD2EDAF3F1368D8E7B71
-:10A940007AEFA96D1A9DFFE27F7CB8ED4ED0037FB0
-:10A95000EE5280CF2C7BE4F75E62807BB583D1FB27
-:10A9600099871FDAB985D2CB99D71DA8B79CF9D999
-:10A97000897C95AEFBCCE37FCB867B02B7FEECB245
-:10A98000E100875B9FF8FAF0A1EC7EC0D788C3B8DE
-:10A99000AF11EC5F7D5A60C1F8FB796AD99FE7F788
-:10A9A0003D9F0FF3FCE08803EF152EA3DF1A2A600A
-:10A9B000BF9620DF87FC4A0AE7A5BBD7FCC5362E29
-:10A9C00011BCB50B441FA4946C7CB0DFD77CEB9218
-:10A9D0004A48ED7E15FA23FDC8B7ADED96BD4AF79E
-:10A9E000F52BC9F7F163F2990CF05FB6BB9D8D6B47
-:10A9F000D9C70FE07F260DDEC79B1CE6F3958FC9F4
-:10AA0000E2FB5197DF9799305E4ADFC7254F7C7B89
-:10AA1000483D40E707E782EF7C1EF757EE082C73AE
-:10AA2000005DED4DD57C6C7F233368D9993D1FE7E0
-:10AA3000138A1FEFD9FB6F043ED9FF3387B29D7E87
-:10AA40005FF8B3D790CECE3CF11B5965F79DDC0281
-:10AA5000D513CE9081BF5ED01B96F233E4653B3CAC
-:10AA6000518737BE4F4B23574F57BDF8FD6DFC1E26
-:10AA700061F8BF3472E05A21C1BE3DEC28627C39D6
-:10AA8000320CE1B284F4CA4AB9793F8589B08F6F3C
-:10AA90004F03BC4BB68FFAFA1558FFC586FDDCC1D3
-:10AAA000E8D65A7F29A54FF00B0EEC6B44788D2425
-:10AAB000A0D333DD0E09E27BCFD8CF713FF74BEA4D
-:10AAC0007F0F38929CBF71389C8BCECFB5BE2F0BB9
-:10AAD000BF8DE0B41E36188EA73F4BCCFF9F730886
-:10AAE0007C1EA1E9B9B6C1F2CB4602DA0585F1F9BF
-:10AAF000B6F6D890AF9FDE65C3FBA6563EB1942450
-:10AB00003EA7FEA53ECED307C6013F3B7DF0198E82
-:10AB1000970CEF97EE7E5BD6B83C8818E54112FFA4
-:10AB2000D46B9CDF2DDB9FB8BF65BBFF92B0BF939A
-:10AB300052E0BB30FF93BD76A2D12E4EF6D8A627A9
-:10AB4000D29F0E38EC26FDA9D55375248DB6B37966
-:10AB5000535418BA6975E035B0E7B4DFDAF11C83F5
-:10AB600048FEF71C704FD393A2AEA5F06AF2CE4315
-:10AB7000FFA3DE5FB3054E922FA8815D2A65052BEA
-:10AB8000998ECCE6AD97DB15D1346F2A67F3400E72
-:10AB9000BD35FE841DD6F9678B3EF86789B40EA7D4
-:10ABA000FDFD5913FCABD444F86DEE3FB4D24654CE
-:10ABB000A3FC73F4BF05F321CFB908C495D87EEE8A
-:10ABC000D2809F2CDBE68A38E87A9E7FE2939D0054
-:10ABD000B733F73B88C310275EC7EDAF134F7CB286
-:10ABE000EDEFB4FC0434A6E3D76DA3F5410FDF9D70
-:10ABF0008AC1FAFFB9376D1CA1FCB9EEB93BAF02AF
-:10AC0000FE52073443EBD73D361CF5BAE3C358FE7A
-:10AC1000F89E1111D897C53FF9D95290238B7E9C8D
-:10AC20004AC03479FE89D76E84FC99E73C18D778FE
-:10AC3000E6B91397021D50FD5935CAF105C67704D0
-:10AC400068BF8B20CFCA852F0CF1328B20A57C6387
-:10AC5000D1D36901F0131AEA61BB658EFEDBD151D5
-:10AC60004BB45C116D9C682ED0E1A25DE6F1F29CC4
-:10AC70004C7F5A26F7CF63F5C3B98C5E7BB1DD6894
-:10AC8000A7602AB7B6D7EB8F721659FA61ED973ADB
-:10AC9000487D22FCAFE4FD2EDAF5F928737F1AFF18
-:10ACA0006E1D877DBF4D60F74AC8E32E3C475B2C85
-:10ACB000474766507A7D5226F3816E177BA323D3D4
-:10ACC000E978CF723EB93885E6E9F75C3E0FA80F08
-:10ACD00079E2ECFB31ECEF92A75C04F07DC9731EC6
-:10ACE0003C6F59F2E427C77F44BF9F7E2215E3B42F
-:10ACF000973C7707EEF71247F446F06BF73FEE40CC
-:10AD00003FF2E9C75FCA073DE4B43D9A9F31847DB5
-:10AD1000BEA4070EC107AF83DA0565F5743EDA46B7
-:10AD20001677D64052FCAB68BF0DE0D7003C7ED30F
-:10AD3000C5E2A3F839EE0AEE0F3A3B574DC3F99737
-:10AD400033FFD60A7E4F7DC537D5E1E98679405C71
-:10AD500028B988903BE4FA51C0676DB16F1015FCBB
-:10AD6000EDB1624CF57A3685AA59706E90C5CEC9A0
-:10AD7000ED597E52570EED581C11715F394067BF77
-:10AD8000A65BBC62B33A1CFAFB7727E32F1DAEC06B
-:10AD90004227F21937DEF7C4755286A03DC1D6F5B9
-:10ADA00089C0D6659DEF2776CD01FC3C7EBECDCE19
-:10ADB0004D1A24F53538A72487395F1AB47E4667C3
-:10ADC00067950CA4337D1D1D8D0AF293F6461FA6D0
-:10ADD0006B1ACB888A71F87ECCDB383C1CE51AB143
-:10ADE000C1FD5795CDD5E10E06E05C02FA047FABBC
-:10ADF000CD1D42FC72F8EAD1F677BA991FD2E6D699
-:10AE0000481D4DED6E0627B8770A7092795EEA9A72
-:10AE10008170A5EDF1FB025768A313FD11634C7C13
-:10AE20004ACEAA30E507C14DC78B3DFFD3F02308BA
-:10AE30002FF0D3A8E83F9F88706B690C60FEFF007D
-:10AE4000FC9E61F09B4C5403FDC85935A67C52F81A
-:10AE50006DA6F0CB8AD395150E0D3C1E4DA7A764A9
-:10AE6000F4FBC34682CEBCBB1BBB30D5BF6724916D
-:10AE7000EB392E819FF78756C1F91F51985F856482
-:10AE80006924CFE04F223E0DEF31E19B2650EE6664
-:10AE90007E447D7F6D8A74DCCCFFD4D7603D77BC67
-:10AEA0006C17815FD91A1E20EF641AE87846D0A586
-:10AEB000229CFDE8BF6DE2F2B565603FCDF4D1D1D3
-:10AEC000A862BA8ED3C9064E271B61DFC13FE717C0
-:10AED000714F3BA713949FF7D03CB3EFA3C4E8D7BF
-:10AEE0004EF7F744ED74FF9127A998B2775E8E383C
-:10AEF00022A5B45D6A390900BEA41FF95E84BDDFD6
-:10AF0000D283F7FBD339FCC8FEA2F4EBF0FE34B1D8
-:10AF10003339456C2C0DDBC17EB2C2B7C97FD00975
-:10AF20007677B2F964FB35473E1D2FFB4D07F2EFF4
-:10AF3000AC1B7A8ED4D275B83B53D19ECCF6337C01
-:10AF400074FB43429D61FFB293E87D9B5D57385C83
-:10AF50008087107F4BF9F6DD5DC52E3CBFB0F7F85A
-:10AF6000800F76A43339A3CEA2A35D1C6F7796F32E
-:10AF7000476FA599FE757EAC4CA930E1B1CE6F3319
-:10AF8000A69AF15DE7B76F0EF0DB608E0BCE3563EE
-:10AF90005B911EADF8DF649735E12BF0DE06617E34
-:10AFA000A7B705F60ECB603E80F12867FB0AB7C352
-:10AFB0003B00AB79FCB346E905E50EF77FEA77B9CC
-:10AFC000F690609B5A08EF81500485776328FE0055
-:10AFD0003DACA7F843305EC8CFE96422A63A7E565E
-:10AFE00083F3C4A0B7D94A5E14D9FD0B11640E9146
-:10AFF000A81DE8063FD381494ED00B253B8B53E972
-:10B00000F7883D7036D6E29EE984F86821BD12F7D4
-:10B01000FDAF9EDA82A1CE5508C4F152BC51DC7E50
-:10B020007214C6817BBA40174A05017B728FBB3709
-:10B0300005EC1BBF4B349DE374B842D35C86FC58CF
-:10B04000189DEFDBD770FDAC1FEB783339BD933C17
-:10B050008D9418E85B8F0B25AA46CA0C74BEBA748F
-:10B060001A8173CDC1F49D848F3DF8DFC3C79A0A5E
-:10B0700022B86F762BDFC8A2FCDD8DA9262A30FF0F
-:10B08000BDCDFF361EF1AC0EE041DCDB07F497AF1F
-:10B09000150D9EA7956FC5E5918AFE2A2A8FEE9D14
-:10B0A000087C30893C3AF0A751DF9269F93B2FD9EF
-:10B0B00004A3BF6E7EAC1DE5415D6C1251E97C6B53
-:10B0C000BB7E80E9BCAE6EC4FBF7222D5ED8C7F70D
-:10B0D000DA983DF75EC41EC17884CFBEF8C2067E02
-:10B0E0007DC2FA7F6F6B13D623E07D318CFBDE5679
-:10B0F000D69E54AAA84F9FE56BACDDE008405CF9F2
-:10B100007B5DB4DD10F0AC056328817E8AF7FF21FA
-:10B11000D69FD48F023EA7D3FB1D32E54B0087B7E5
-:10B120001C09FDEC0B5C97AD03782F70053601BF51
-:10B1300021EE8CF37A87E21D91EABD08EF90F76A61
-:10B14000939F95F931DFE17A31712629F7F2F64ABA
-:10B15000E2F2259DA75EBC8BE65ACB434162B0AFBD
-:10B160006D84D9D74B9FAEE6EF7DB0F924C04FA6D2
-:10B17000CF763A900FCDE5FE201D5FE3F812F2F294
-:10B18000FBA0267C5A10DB88FB2D748CBD771285C2
-:10B19000DF87148FC02F27745C321CE868D5DAAFC4
-:10B1A0006EB881F6FFD12B36FC3E3FE6C2FAEFDFE8
-:10B1B000E5BFF706D0D77F69C733F68F0E5F86E706
-:10B1C000B1EFDBCD7E841B5318FDFED1C5EC917928
-:10B1D000B10E937E3CAF6D8E0CFEC779B1F5F87D54
-:10B1E0001E1CCAB07B1B87AA4BE0BC86E0F9E81F97
-:10B1F000DBDF9DBA1AE55905FAB1EAD63912DE232A
-:10B20000F9A34B35F19DBABE4EEC9750FD282B9B10
-:10B21000F767E01F7531B87402FBA311B867308F70
-:10B22000F39181F96DB59BF8C8FBAEC47E925303D0
-:10B23000EBFB2AD2D1E0F55DCAE84B1FB78FD15D99
-:10B240007C3DF74E4AB49EF83AA660FDF7D3138FC3
-:10B250009F91C2C63FDE389F04281FAA75D07A6E20
-:10B2600018FF96D68960676F4DCF100CEBAAEB5A8A
-:10B2700044028675D56D9D2DD71AFA8DEF83ED05A5
-:10B28000E33E64A4FC63EAEA7290DBC17F003DD533
-:10B29000765C322E847636E327EFD8FDF9C0574F1F
-:10B2A00074DD9290BE33522CFBD3C5F787EABD956F
-:10B2B00086FDD1F7C5DAFEF89FEAFE7A17F8013667
-:10B2C00033A52619BC06ED5B6162B89573FC3C4E54
-:10B2D000E56C08E1A63E7904F07A5D2AC6712687FE
-:10B2E000DF85243414FC92E8AF54DF294D9900E344
-:10B2F0001284435D17C38373C12D3E2EC783EAC4F6
-:10B30000EBB97E000F1A884609F6A87C2E3CB8934C
-:10B3100068CE21D6318007A34C7870FDDAFCCB8053
-:10B320001EDF033D65D4E0FD3F2A6BDEC9700EB41D
-:10B33000D686E74C4753B4ECEB597E3CF0E7A3DEEE
-:10B34000F055932BE3F9050F967A671BC63DD1762E
-:10B350008B37919FF5FA64F853A291F2AAFF7DF81A
-:10B36000F34E927B570B5CD537A6005F0E27F6E7AE
-:10B37000EAA9CEBF6D69EE01BB13E4E95177D15F55
-:10B3800023B4F451576801F47387A88E9B2DC4ED44
-:10B39000CF41FA67E3F44B8E9582BF3078C9313BD9
-:10B3A000EA43D81F01BDB290DFDF42FF460ECA0359
-:10B3B000EB79E9FA94C284E7AA2D8DF5171DC30035
-:10B3C000228D28867B6012617AD4A784F9BDF4F5BA
-:10B3D000C8F690E207FB522041C073BB146A833861
-:10B3E00028BB2F6BBC66806B670A8BFF731D3AD43A
-:10B3F0005648DBBBDE7D45C1B8153A0EF8D79C79BF
-:10B40000D259A37FDA9EC5E2124989E17B11C42794
-:10B41000D0BCC9CEA7F31DC24E7D566070D03C0E85
-:10B420007E0F4EB381DCBB4E7FF8024047F1E575DD
-:10B430003D0E446A66E5E97A71332BE7FECB65B5CC
-:10B44000CC3F69DDD7EBF6AFC177F5AEDB9F3307B5
-:10B45000FC58D7B947BD0BE70BCF820F1FF03D9DBE
-:10B46000C9656BBBC7389DFE5BB7A8D9E9BE1CB2E6
-:10B47000F71F84B876ED36F64EE2F5BF3F644FA570
-:10B48000E91BAF1EB5435CD14D10A043D7359BA837
-:10B490003253822308D739A4C7C3F23DC3667A8CDE
-:10B4A000FD515315FA5BCECE79AFFFFDAB9781F816
-:10B4B000A4FDB5407AD32B4486FE67EF535BD9B524
-:10B4C0003BDEDF7EDA9F18EF2F0E4799D9399213B2
-:10B4D000E112879313E1F6FA405CA4867E14039C84
-:10B4E00051DFD0E13C00B7B459579271C9E9E53A50
-:10B4F000F7C877C9B8F8BCAC70FE088A28BD3D9380
-:10B5000012F815D04D2425F06B48173BFBF3A5220C
-:10B51000BC77F83BE0B34B6DA182EC62BC8F386A1C
-:10B5200018C471F5263E5FB5D2E95B402F10CFCD30
-:10B53000E32B6FE4EB7BFE7B273C1837F9C46BF9F8
-:10B54000902EB1F5ADFB2ED0DB7FD850FF3EBB6F08
-:10B55000D49071696F717FC7C914FD3D16B6BE9B4B
-:10B56000B81E77D3BED408BC7B795383CDA4FFDE4D
-:10B57000D4C0E23888D43BEE5A931ED99CB41FB095
-:10B580003BADFDE8EB3B989F7B21D887F74F90556B
-:10B59000F03F1C78E5ECEB75349F32C289E7B2EBE3
-:10B5A000D239FE568BB8EFF7A70752C782DF696D15
-:10B5B000865FA3EB5CFB02E911297C0E8EBE3D5237
-:10B5C00043C75B7F89883EAB0DB107306E522B6756
-:10B5D000EF14295C1FDDD07BB40BF0F1C41107FA26
-:10B5E000FBED1E765F75AD3D980FFAFBBBDD72C2B9
-:10B5F00077EFFEEE96705DDD421FC6BBCD21612761
-:10B60000F08D7DBD3387C37CBC7EA200FA9FD86AD3
-:10B6100013F93D28EEE7884ACCCFAE492C1FE0A9AC
-:10B62000E232C6ABB54F9F8AF114733B7F8371C280
-:10B630005E7E9FC93A8F0B53D97C3DBD1957007C64
-:10B640003D53457CD3C8E3EFC778F182DE1A19DB9E
-:10B65000878521DB17AC54AE00B8427BE0FF05E7DD
-:10B66000D9BE3895C53B6DE47672B7DDDF3A95F605
-:10B67000D3BD2E5D80FDD0EB4D4965FACC89A9BACA
-:10B68000FF268CFE9BFC12C505EFA3E40790B8894A
-:10B69000A7328C71B8DBA11EF36F221CBA473F1989
-:10B6A00085F3E3B5201B609FED0C9FD6AE13D09FB2
-:10B6B00049E1970BF2E2DD7B1CDF807514B4090AC7
-:10B6C000D8DE344D38EF5BDD4E66B774DE8B762006
-:10B6D000B847A1DFFCADBFC3797992AC779B9BC122
-:10B6E000EBDD73E0475AAA9DDD1B6AE8E57652144C
-:10B6F000DF3F0CEBEFC2052AD9BB84524035C6A10F
-:10B70000C4E987D961749D0138DFAA9D2847C00F1D
-:10B7100020B675E33BBF73C20E72395D5FA7D01BC5
-:10B72000007AD12688FCFDADC05B00A7F51B8763BE
-:10B730003CDB1A31908FFE9DFF25E3F9D8C1C0D9BB
-:10B74000CD73687EDB4419E9E26080DD6BBD7F6507
-:10B750005137D8E19E861A7CB737A2E04BB8A4A92E
-:10B7600092BC0CF1A44D2B4545A0F5C341FD7E8153
-:10B7700092027831DEF6E11565707E9623822F897C
-:10B780009C10D8BB202D2B6B14D8D716254B30DA44
-:10B790002DB7A432F9F2ABF4E02DA934F5DD75B77D
-:10B7A0000231DD1B62991782BF506B9355F67E30D4
-:10B7B0007B4F2493EF4B66AF189DE7C5BC7B3E35AE
-:10B7C00091374C617ECA1F5C1962FE453893AC42CA
-:10B7D000FF22FFF3E1BE66F1DCDA312998D9B47AB1
-:10B7E0001ED6877EB2693F999562B48AF6BB3D3D0D
-:10B7F000B00DE5C9654E841391FABA004E91CB7233
-:10B80000FD10D77AF7A491BF8127A5320FF7CF0497
-:10B81000391A1991F24637F0A91659053ACF5C79D1
-:10B82000FC06F89EEEFFE12D906636FFE14E900794
-:10B83000E97D7F69C4EFD365937F2FF3CDF73F8711
-:10B84000F2CCA06CF2139E4E0FFE3095EEFBB6F2DA
-:10B850007018DE3DC51DCD8EAF63CFAADEE9F08E38
-:10B86000F589AB45FF765E8EEBDAA444D632B85547
-:10B87000825CD3E1B646547BE01D65ED2A27E247A2
-:10B8800009E9457E9503A7C8C5F17DC97CB37D391B
-:10B89000C44958E7F308A75BF883772531FE9ECAB1
-:10B8A0003139676A0AE0F5E315BD3ED0E3D7A52735
-:10B8B0008E4F38E966ED1D49EEA71FE7E5C012BBC4
-:10B8C0002A300D8C85D44DB43448F39CF83EE1E326
-:10B8D000A2FA47C4F3BB6D2AEC0FD4B7D3FD3BF0FB
-:10B8E000F249F40F1E08FF0ED317DC657A7FD16C86
-:10B8F000DA7E7DE551F6CEB7C270A4AE8DF18B3AFB
-:10B900005F9F13CE2BEACA89B29DE39BA6C319FCA5
-:10B910005D5C5ED55ECBE09A554EF0BC157C62F066
-:10B920004E5936D4A3F0CB6A5BB51CF791F46AC5C7
-:10B93000B4DE7AE817F6A799DD3B21A4CF89F41B82
-:10B94000B6E17923A5F75FC179626DE7703C6F8737
-:10B95000EBE9D05F061F3783F7D74DFB01FFDF8987
-:10B96000361BD98EFCAD97405E5D497119F1B3BFAE
-:10B97000BA8CF6AB562ACA5A1D0F743E4649632E3E
-:10B98000951700B7B99AB61CF0EFA8537919E6914C
-:10B99000BAC9A1C2FAE76E7AEA0ED05B527D7D6D1C
-:10B9A000C01FEA26B2F96674D2EFA8DFA8BF82FAF8
-:10B9B000759D0E958DC7E157C9F18CC3E1663EEFC9
-:10B9C0009BB7B279A78C8884013FEB5652B8425995
-:10B9D00088E13DB834BF1091AE0EC3FA3D5A36F639
-:10B9E0003B6C96852E2CF8A7AFAB96AFAB76255B5C
-:10B9F00017E1F444A715857E6B2BD93AE712D65E82
-:10BA000084EFB4FF9BF97A6AB52731BDB9CD61EAFD
-:10BA10007F5BD98E5E984F61B9AC0A0867F63E66C7
-:10BA20003E5F577E331B2FBFFC4984176930CC170C
-:10BA3000FDA2863CA5AB132F51C2A27AAE0081FCB9
-:10BA4000B4DFA3DF93F11CA56493795D27DA473D4A
-:10BA5000D009FECF7B643CAF785CF4BF558076A8FC
-:10BA6000AC32FEE3FFDD0CE0D33737E3BDA93DD5B3
-:10BA70000CFE27BE4922800FA587831900EFD2C391
-:10BA8000219ED6E33936DE13AB8AE331359DDA04E5
-:10BA9000E097B1E247E7031FA0FB0CFAE008E3BC24
-:10BAA000E9FC32DBB26B200E296B62468D8C4FFABB
-:10BAB0005ACA0F6F9909EFD7661DDA720B8C934340
-:10BAC0000CEBA1E5459E62A4BBCC43B414EA351C43
-:10BAD000BF0BF6A393BF2F5F0A33CBC0F410A4991A
-:10BAE00094BE3B32609E12995A11E7070FDE533520
-:10BAF0001EF80ADE29A9C0344A2A06F30D43FDD1F7
-:10BB0000BCBE2624A837DAA39AECF207EF99361ABE
-:10BB1000ECF7F5A027D27D6A27CA87101FA3F94545
-:10BB200084FB7A7BD4594EF36BA8DE08FACB86B23D
-:10BB30003F884077EBF7113FE04766F01F0EE33E8A
-:10BB4000CE71A7E3BA25997400FD1F1C7D7C3AECE9
-:10BB500053E48088EF48D4FCC2BD2515F4A1D75921
-:10BB6000FC49F74BF528BF6FCF9713BEC34CCEA14E
-:10BB7000275AEB6794CE443F5EC1A68DD3E13E4E7B
-:10BB8000DD74C97F39AD9DB5A9BA1AF4183548B12D
-:10BB90006B389DF7D6F1AB8008D519ECBC4A9DCE29
-:10BBA000BEAB5359DAD138FF22B0DBC3BB24173CFC
-:10BBB000853CA69DBD57D7517ED619A27A6965F5F9
-:10BBC0005EE737E9F76395540AD2EFC7A69C75C1C3
-:10BBD000F9CCFD95359900CF7D6D66BD8EC0636A49
-:10BBE000D40E1AEB08073C745E9DBF27084F9B23B9
-:10BBF000DA554BF3B6A7DCA0E10CB26FDA3BBB67BA
-:10BC0000019ECE2DC3F0E441EB3DCBE5C59C867E85
-:10BC1000BC5755A811768E1ABE1799F2CD9C6514A3
-:10BC20006ABDC8743C9B987D1296022F025F0E97E6
-:10BC3000876468A2F3B3CED2DA9DC0CFFE067A1D28
-:10BC4000C8B9FAF978FF11E9DF06FA507F7522BB0F
-:10BC500029989A82F33DB1F59AD7C03F3DB781E963
-:10BC6000FB055B3F14703FA8DE9743FB2FA8C4275A
-:10BC70002AC9DC9561E758D89F1291A82ACCA787DA
-:10BC8000809D10A6F2C70807BDDF7FB6FD3AB70357
-:10BC9000DB07C1781E165F8F9BAF27DF4FD793401E
-:10BCA0004E5FC5C7BDEDBE0F0F4C02F8AF64265204
-:10BCB00041F86DC169984781767EF3F816F447E143
-:10BCC000B9D3CDEE437B2AFBF0DE9195BF833A0FCB
-:10BCD00074BB2DF5CC7866DF9BF9E9A03CC72BEB54
-:10BCE000F77C0BBF1AEBE8B912F7770F7BEF9C10CC
-:10BCF0004AB74E7C065465EFC446F477C9EBA1DE23
-:10BD0000188F5B013CE81CFD870A80CF3AAE2FDC20
-:10BD10005C4ED05EBD39AF17F58539CD5C5F90FCC8
-:10BD2000ADC06453B7A693B506FD0143FCE188B1ED
-:10BD300099EB0BBAFCE772BBCED7DB867215F40326
-:10BD4000835CADD5985C2DF031B95ED746C75139CB
-:10BD5000325719F51226C7D54D5C7FE07238938FA4
-:10BD60009BD5C6E45526E8115E083FD0502EE35916
-:10BD70005E765C6F1956CEE46566E7E328D75E0110
-:10BD8000A7CB04E01B4C5E8EF8CDAB1A80C9473FB1
-:10BD900077513EFD142FF729543FCB88EB676B4456
-:10BDA0007ECE44987E88B1F5749E8FF1FAFAF71D25
-:10BDB0007C7E8F1FCAF806F0D707C345E36D06BA2D
-:10BDC00045AF27CDE757B273FAFC06764EEDF1CFBB
-:10BDD000DB69339C3F34BB99BDD9ACE35543D407F1
-:10BDE000FDE2FD40E4E3EC7DA976FE1E946E5F7DEE
-:10BDF0002795FB3538FE2493273A1FF29080B79C95
-:10BE0000C2F7586427F26B8DDA4BB0B663E1A6DC5B
-:10BE10008540EFE1AB2B61FEEB27FD15E32E0A9287
-:10BE2000D88B7F073B93C1E14BF175CFF457991D38
-:10BE3000DA2B26BC2733D123E13C7B24920AF07411
-:10BE400085D9FB84AE8972C2FA177A18DF943DEC6B
-:10BE50001ED1FA493BF17E6352F92C11CD96409EDA
-:10BE6000EAF2B613F6793221D5EE59AD1AF2FD4851
-:10BE7000D086FC95A0DD19E6BFFFA295C9E837EC96
-:10BE8000B4879DB01F1B2AF9BE2ACE6EB88FFEA5BF
-:10BE9000F785C203F6B93D2046E07E793BB554C72D
-:10BEA00032BF0EFE7ECE096ABF1BCF292EF3881C3F
-:10BEB0004EAA08F189056D0CBFD64F92711E6BC753
-:10BEC0006777DB0A8DFC97C12998CAE0B476D28BDC
-:10BED000885FE73BBF790D774E3E6638473CBEF939
-:10BEE000A1228073FC9D96C090F717E635FC66F2A0
-:10BEF0008E04E70303E56047B9C10E8C5C6F3C67B5
-:10BF0000F9770FB3AB431EB3FF0EF8AB1D8D8B4813
-:10BF10002EF897F65C12F1A2FF7E313BAF5DC0CFE9
-:10BF20006B4FEEB806DF53184BD1CA9E60DFDF6F50
-:10BF300034BFA7F0FE830FE532BF46C414E7B160FB
-:10BF4000E73363D8BB661AFF9D0CA26655B177AF85
-:10BF5000514EBFE8D71CF8EE5C10F9900CBF5301AE
-:10BF6000FE76A0E062B8D7DF83A91BE8B778F07B44
-:10BF70006E19540D43BB8B0431CD26F598FA481841
-:10BF8000D35CD283691ED8B9C52017FA31558922EE
-:10BF90001203DF2F227ECC979020A612EC5B66FC6A
-:10BFA0005C42DAE5C4F80B38BF00BAD7CF29F4F306
-:10BFB000FD199EDA4E0F327BF379C5524F609D0713
-:10BFC000E11F45BE3D87B3F0C33F1ED303F77B5649
-:10BFD000AC63F74B74BE8E760DEDFFD10C2607B423
-:10BFE000BB05E45FAB53AFBA14E1D8693F6D3C6F5A
-:10BFF000204E6709FCFE8BDEEF1CEE5F98C3E51F49
-:10C00000B8B7D9FD3B3FDEFF99037E0643391928B7
-:10C0100067F7AAF57EC4D42923873ADF33B4C778FB
-:10C02000E45A8BFE7F4EB96DC9CFB5B6FF8C4E2852
-:10C030003BEE877BF452359F9D3331B94D1149C595
-:10C04000766D8EB7D10E0B5F1630C2E510C77F5DDF
-:10C050009ECCB5F8F5ADE95C89D385A51F2AF9D248
-:10C06000E15E04BE6962A06BFDDD5BFD77D2160464
-:10C0700042720E6BE6C3773DF8BCC3646B4D0E4D48
-:10C08000DF83BCC19F7FD81BFAADC7608728817A48
-:10C0900091BFFF8774388FD3E165B6CE6AE06F2712
-:10C0A00042C40FF6C30252BF1EF431F2AA0DF9DBEF
-:10C0B0000574DE7205D86F44133330AFC1EFF97CDD
-:10C0C000D0C8EEE51CE7EF56EFE4EF249DE2EF5415
-:10C0D0008FEDBAE32AC08393FCBD6A9DFEF571C75C
-:10C0E000F6A4CE06B93FB6E7923AA8377697230A68
-:10C0F000702EDBD71E04BF10BCCF9242C7C9A3E38A
-:10C100003933808F1094B7A73A5322ABE93C4F756F
-:10C11000D9902F7F5C2EE23B23F0CCA58DCF2F2D25
-:10C1200003FAF9FB8DA0879CE47C447FEFF154B5C2
-:10C130008AF6F10B7BD608702FE1D46C15D77D2AD7
-:10C14000A7273F83C2C7E765F1E525BB1DD1223A8A
-:10C150008F858FBC5E540BFCAF28BC30D13973BACD
-:10C1600097F1BF534F108C873BE5E2BF4FE4ECF1F2
-:10C170001AFDACA95EC164179EF2F0DF39CA3B47D5
-:10C180003D1E5F4EDC3D5E46F73D5E388FBA37F5AB
-:10C19000C7787FEDF813EC9CE285CD75F9E08F1A36
-:10C1A000EE55D939FE9E9F60DC38AC03EC683A3F0F
-:10C1B00015E6776FEA5B27C1FF40DBE1FD0CBDDDD3
-:10C1C000F13D75AC7E17ADEF45B8136F05E0038305
-:10C1D0003BD9CDF884AE3F2E8A64E3EF2DC4CB4526
-:10C1E0002C8729BA28FCC7EEBE1ACFB5467B3398F8
-:10C1F0007C507AC6CCC4F987F3611D7B2E09E58398
-:10C200001FEFB8FE7B4E52381FE030C3131AED35D6
-:10C21000F0F7F7DF7E0AF97B9958FFE7BB002FF7AD
-:10C22000B2DF1FB9E3CD8DA2917F4CF432FFFABD8E
-:10C23000A94BBD701E757CE09D9C308BF7D9CFDE7D
-:10C24000615DC469EF7837B59F283CDEDFFD032CC4
-:10C250003F3EF08E4D0FC693BDBFFBF90C486B7986
-:10C260003C3F895C83F445E1D2E64C20AF06EE45C5
-:10C2700045D87DB733027F7FF43E1D6EF5F24CD377
-:10C280007915A3EFBCAD8587505F8E24BE276795D7
-:10C29000F7D6F764CF750FF828A7D363FC9D92A556
-:10C2A0009ED0B7BD09E4486DC7927C80732DDCA990
-:10C2B000C33887AF5E0EF636DE3761EFC946114EE2
-:10C2C000FA7BB1643C2B4F67F9C5DE2BD7804E74E7
-:10C2D0005C7F7F56FB1A2B2F64E56DBCFC254F70ED
-:10C2E0002E1B9FBD2744B9623AFC2E85CEFF92AF2C
-:10C2F000DFFCBB143F029E3C01FB5B8AFD49B4BFDF
-:10C30000B1FF7A7F3ABFF997FB71FEF7F6A3F361AD
-:10C31000A04B08D9237EFF98FF0EF8FDB3EDC9AC02
-:10C3200002133FFF6473712B9C037DCCDF0F71748C
-:10C33000AE2220976EDEB4D1F4BB26D677BD9A78B4
-:10C340003C895C4CE9CC40CFFBBD4C8FDECFF92162
-:10C35000FCB90DEFF9C05F673686DCA0FD378ABFF8
-:10C36000F35E46C2A85F8D213D9896935E4CC791BF
-:10C370007E4CF198B4185C7D7E1B7FAFB70A16BF68
-:10C38000D819BA1F42753F75849E017C82777B0560
-:10C390001BE8454B27C3FC7FEE55F4DFF52496DF01
-:10C3A0004B8BFF0E880A7ACD0CDF507A0D51A4D347
-:10C3B00003F11B45F8EEEF0B5EEC37D9EFBF2DB75D
-:10C3C000BC7FC2EE11EB7058427A300EE285AD2B85
-:10C3D0005E1E4DE1BF70B707E5C1C8ADCDF8FB5F8C
-:10C3E0000B496F36DC2F1DC9DF93205DECF785F418
-:10C3F00077224677394CEFD42DB1FCFED022FE7B5C
-:10C40000618B2CDFF5FB9B1DF021411C81F5FEE7C4
-:10C410003BDE24EF369527FE1D18EBFDCFDD3D22D8
-:10C42000C6F7AC80782121CEF746EFA87798F1AB1C
-:10C43000E7D212C3FB4E4D829FD9D39E94C083C2D4
-:10C44000E071462A0CBFF60842C238B26FA6897C5A
-:10C450001F9AC995B49FA6C59202F666532405CFCC
-:10C46000419B1466175EE0A971829D4ED2457C47C0
-:10C470006E9A6D0AC697CB4BA48BE0DCF3D0F685A1
-:10C48000BD707FA1C927A19FF68274760E4A7244BF
-:10C490007C1FA059D99B3E07F6C9CDCE1947282449
-:10C4A0000271F007BA6F1721DF44CD96E1308E108C
-:10C4B000EAC57B373912E1E7AF33C653FC2BE0F80E
-:10C4C00020914EBC7F3C75C93117C8F502BEEF13F1
-:10C4D000D20A99DF98EFE7B686A3E980A72F75B750
-:10C4E000FE761AEDCF1E9130AEB5ECF3A637A6D18D
-:10C4F000F1FABB658C67D5E190BF5232DD9FCDBBB1
-:10C50000D59C972DF788256228A7F9517C7C78C0A7
-:10C51000296A8CABCA0A3067A1E246FCB8284D20D4
-:10C52000786EC3F3A3214FF174973D5C03EF61EE86
-:10C53000FA93807E8783DDF30A304EFF995001E045
-:10C54000B78E0FD6FDFB1BD7872806B8F8FD6017FE
-:10C550001CD659F1A7B99194823FDA193994722106
-:10C56000ECE3613BBE23D5C2F56F89FF4EAF8E2F42
-:10C57000D6B4C582772D9F5F8378D74FF16EFB10BD
-:10C580007827292AEA09F63CE207F2B767F5E62A96
-:10C59000B4DD854FC97E3705D9B4C7CAD3409FB92A
-:10C5A000F0F9EBF09E2CC00BDF796C904BC1EE776D
-:10C5B000346495C2EF1D4D7BCC8DF878D6CDCE7FFF
-:10C5C000A486543F94377557F954035EB7362AA5AD
-:10C5D0005229BC6FEA2C85DF456A4DF23BCC23D251
-:10C5E000C520F897646EFFCF4B63F39D97968AE959
-:10C5F000CD3C7F9FA4CD84F9DF47F107E2050EDC37
-:10C60000CAF077458E13EF3DAF78A978F8507140A6
-:10C610003B1B7DA500B7ADB7D6A2DFA37AF921D722
-:10C62000E540E71EA702F868F38EBC770AE0FBCB73
-:10C6300076BCF7D5E4A952E718FAB37927A25FC907
-:10C64000266AB96014DD9976E4722907F045DB02A9
-:10C6500092A869C373974B943FEDF268B9022DEF2E
-:10C66000D8F03CCB0FD3B608B4FC071B7EC1EA8FD1
-:10C67000D072E1973F7EB4E13F5879A9B605F20F39
-:10C680006CF835CB836E41F5984737FCEE72B82FC6
-:10C69000DD64F7CF02FFCE8FE9FCCBE9FC7B78BAF3
-:10C6A000278DF973F4F2BDF09DC27B1F4FADE54FAE
-:10C6B000F2764F2729FF292FDF9FA4FF9FF376D122
-:10C6C00024ED0FF2768792B47F91B73B9CA4FC6572
-:10C6D0005EFE4A92FE7FC5DBF52669FF5BDEEED586
-:10C6E00024EDFFC0DB1D4952FE062F7FD3D2FF5B36
-:10C6F000BC7E1FFF9EE7697B43A37897D7CD5EF68C
-:10C700002CF3B4A1FEBEB5BE12F1BF6902D33374DF
-:10C710007CCF83784D9A2F52585C5591C2ECB85F0C
-:10C72000F0FEAB97976C00BC5BF14B1BCA532A47DA
-:10C73000F0F774B5E52CEE65C54BEC3EC88AE51202
-:10C74000BECFAEE3E32F2CF3DFC6E7D7CCE7FB5C2D
-:10C750005A113F6FF195CE30C67B2AE6BC93D213B7
-:10C7600084EC346731F952B6BCC6390AE407952F18
-:10C77000C0375BDC7214EED1B72812963767D52824
-:10C7800050AE2912CA9F96AC1AE71CF4E764A07F4A
-:10C79000A280C7ED352B12DEE397D2A762F9B4C7AA
-:10C7A0006628C0479B497F3ABCCFA7AD94F0BCF642
-:10C7B000407D0D7E2F48FF281DF8F38174B6AE43EF
-:10C7C0009E175DF08EAB749B88F26224C08F8E5BE7
-:10C7D000B4528CA8B4CA21658508F9079A99BCA2FD
-:10C7E0007F9EF186771477DD5EF532C4EF34AD932A
-:10C7F000F077B6E14F32C88312FE3BA5994A8649CD
-:10C800005EDDC7FDB89ACF8971782512F1197FBF17
-:10C810003253E1E769B619F88E5971D82C9F0ADBBB
-:10C82000CCEFD81458E493555E8DA8A7FCD150DF07
-:10C83000E1534CF9CFD3F87B167EE2077D66C5E362
-:10C840002B2E8750769D5FEBF2E5BF005F71521291
-:10C8500000800000000000001F8B080000000000A6
-:10C86000000BDD7D0B7854D5B5F03E67CE3C3349E7
-:10C8700066263393C97B1220040838811023BE2614
-:10C88000216044B403A2E2A338E11920C9044A2B71
-:10C8900056BC4C48C440B186DB8840810E2A8AF5DC
-:10C8A000D1A1458D18EC808878ABBDD1D25ED4D6AD
-:10C8B0008EC855501EA3B648BDB5FC7BADBD7732C2
-:10C8C000E724516CFDEEFDBE3FFDEC619FBDCF7EC8
-:10C8D000ACBDDE6BED3DE7CFD3BF2B09695D19BD64
-:10C8E00062A89E902D2B4DC314FA6CFD72DC4C5245
-:10C8F0004E4822D5E27F482264F54ADB3065182194
-:10C90000E779FB621B7DE92264AB129E4E9CF41911
-:10C9100051484B2121FB96C904CA4BB34C11236DDE
-:10C92000B2F4D5DF5D3D1CCA4B641FF1F67DAF7DCF
-:10C930003EBAD2330CC67F259D60BFFAA034ECD836
-:10C9400038FA6F25E809A41232A443391A3711FCCA
-:10C950003B4FFF2B6CA7E592BEB25E1FB0D9AC84F3
-:10C960001490A476743E8AA6AC771DB6074BA17FBF
-:10C9700005FBD7CE23AF99AE3FA95FA3C7A62AAFC9
-:10C98000969A4BC810FAA47305F8845D7264075D2B
-:10C9900067EEF2BB261CCB2024E7A0A58DC01A3A77
-:10C9A0001E24C44D880EC6A6EB5624BF97E808691E
-:10C9B0002B2CF349F479E8690B83539E15E16490BD
-:10C9C0007C99D7D0A7510ED8A07FFAE787FEEFCD8C
-:10C9D000B36C5F5B08C5A009E090BB9376984D8B64
-:10C9E000E1DC35FEA1749F28B8C904A8EF69F7D32C
-:10C9F000F5EF947ACBB5508E460CAC3D2131F8BFA3
-:10CA00005DB2C4EB895FF110F29424F1FA91B5356F
-:10CA1000B9B4BD621BA5F80899DD31BA5D7F39D480
-:10CA2000CBE27B3FA9A4EB83F17819E0F2C4015E6D
-:10CA30001FBEB4BD86CE6797418C4FC2D07E972C67
-:10CA4000B372B8BCBDE632DA5F35FF3E9CBFC69F0D
-:10CA50008BF3B9466727A4D97665BBF592BEF9B6C4
-:10CA6000D827B5B728849CF2C6D3E87691C6EDC71F
-:10CA7000DC8476B57A6630007024C44702A309F9D5
-:10CA80006FC98BF822F64FBFBB2A9C435F9D39F8D4
-:10CA9000455A297D8674F18329147E8D5D4193BEAC
-:10CAA00088C259EF0FE714F67DD7B87B1A095238C0
-:10CAB00085BACBF039C0778714F99FFACE64B88075
-:10CAC000F14EC5DE6C7A925635EA82EDD621D89EBB
-:10CAD000B0FD1F787DE2FB534FBE79238C77DA1BC4
-:10CAE000774F01BC8C51B80CF09D68DFD4554500E0
-:10CAF000EFFF62F1AFB48D27E4263BA333A234FBF2
-:10CB0000A07DD4D461F3D17AB3BE23E0A3EDE9567E
-:10CB100046E4CABEE72ADB506CAF7DAFA59FA8896B
-:10CB2000644CA5781D6E507C3B0894C329636879DA
-:10CB30005DA332AE854E6955D91FC69642F9192BB1
-:10CB400031D2726BC3014F29D091CF40287B21EBAA
-:10CB50002E8966011DB7351A663E42E7138D2DF505
-:10CB6000CC2BEDEBBFC54E098FCE7FCDCB94CE2E17
-:10CB7000A24F7DD42EC1F7C314027468B6D37DA62C
-:10CB800065739683840BA19D751DD0E31A7DB0B6A5
-:10CB90001ADA65C964071DD73C6C466D359D87C799
-:10CBA000254B3A9C47CD91F9B4BED56600CE467E62
-:10CBB0006B9FBD13E0F484E26B063A7CC26AB585D4
-:10CBC0006905E58D7EA05B6598330265A38E3447C9
-:10CBD000E9FC72CA48206AED9BE76F397FFCADCD56
-:10CBE00080F35D678E4EABA2FD5896CAB6301D6FBE
-:10CBF0004DE3869EC9749C9F363EFB460B7DBFD697
-:10CC0000AD109887D5A9C40C69148FAFA573A4F390
-:10CC10007EAA256003FE997029E4215A6F196A20C3
-:10CC2000DE243E682DA5E524FE94E154FC66FAFD61
-:10CC3000497BF0D7363AFEB8D70F9BE07BCF7859C7
-:10CC400006B2892A6C9FD3CAD5FDD82E53F7E3A824
-:10CC500051D73BA7AAEBDD33D4F59EDBD4E5ECB985
-:10CC6000EA722DE0DB786848E75C41D7C1AA8825E5
-:10CC7000FEC94A9286F0790BE06F29967D001F73FA
-:10CC8000E323C7E7D3FA1CE02774FE640C89ECA009
-:10CC9000FBB93FFF87DE3885B3D1D1ECB597F68776
-:10CCA000474E9EE91AD82FEB50C546687BEB1F4FC5
-:10CCB0007C09FD5B4952BB42808F3F0EFB0B7F1E00
-:10CCC0003A9F54F88717E0DDFCE7BB41EEBDA1F3C6
-:10CCD00001BC731A151CFFBE19DE88AE903527B44F
-:10CCE0007D1A6F9F665AD7A31B439F7F5CB34497FF
-:10CCF000D61FAE6ED22C015D52FC407941EA08CAC3
-:10CD00008B7B65520F7843C995407F36F880F29946
-:10CD1000890E03E2CDE71C7F28A6C950EFB6B13ECD
-:10CD20000D5973CD40CFF71C64F87F8F81F5D3DBAD
-:10CD30009F17074511047C52679755FD6CB0F1367B
-:10CD4000BCECB2B3F2AE038E6B802E37CC708C0588
-:10CD50003C31CA2408FDA5E79AFC23E8FACCAF1AB7
-:10CD6000C212ED345D2107F40EDADE426E0FD07987
-:10CD70006C3A6409EBE87BF3BC7FB711E01B7636B5
-:10CD8000EF5DAB7CBF033E90A853108E6657876D56
-:10CD90006C295B4398CECF01FFA0FCB16A58A70D68
-:10CDA000F6D35CD581F2DB5CD6D10170DA3455461E
-:10CDB0007DC23157467C36E745DF184ADFEBE7C9CD
-:10CDC00036E8CF4105BB8176F293DC8E4000FAA5B0
-:10CDD00030972B18AA40BFB8423A4E0687ABD3B95A
-:10CDE000FB0E89F69301FD8D61ED014E760EA75283
-:10CDF000BB17F1D3C9FBCD184ADB8F61FDB455F4E5
-:10CE0000F523F671532D89C0FCC4B8A29FDEFE89BC
-:10CE10005F02BEAAFF0D851BDD2729DF8493BB6758
-:10CE20001189180B013E81E6ED48D756F210D08BE0
-:10CE300033B71AF028FBD0E6E9F218F8CE82E3E81F
-:10CE4000E79108E071B6424C5738407F09201CB585
-:10CE5000F49A75A0E37A4A23BDFBA2A5DF2C85B422
-:10CE6000EB1CFDE938CBE9AC2E1E33003D6BE82509
-:10CE7000EB50E2FB80F45ABADE9672BA0CE04292B2
-:10CE8000DBEBBEBEACD345DF980C9B9549E50405B2
-:10CE90007DBE663C42FE6184B24464EFF921C0F776
-:10CEA000ED8C7F102AAF28B1EE1A6B9B68053A5DB6
-:10CEB0004210BFAA9F5B77CB6F687F6787196C2092
-:10CEC00057F20E75F4807C245DC1E1B00F5B94E0F5
-:10CED000CF5268FD96239904F8F61A339909F8ADF4
-:10CEE000703CD7CA97164E375E90739E7FFE29F42A
-:10CEF000C1E850F7281BA5BD96F5B14326D7FFA280
-:10CF00009E4586A19E957BA0A7C50AE377F8DB4DD9
-:10CF100014BEE6D759FB302D8715805F4301D0E161
-:10CF2000FEBCF90827E56D23013C1DADF347A04C7D
-:10CF3000DE3113E0BF3B9FB9ADDE0BFCC73DC50B37
-:10CF40007CE8DF81DE29BC3A38DD6BD7AF18FC41C5
-:10CF5000D027B4EFD7027C713F03C7EBE83E8E7E4B
-:10CF6000D840D6D2CA1279767B21D0C51ACA7F6939
-:10CF7000ED6C9DB7E94752DFFE3C61AE8AD8C1EE49
-:10CF800058692241235DD73989042971E639DFAC1C
-:10CF900002FE934F6212C8D9FC66AAF0025E2DB35E
-:10CFA000906012BEE79E53B0FD13667FC4CEF9BFFA
-:10CFB00089F2013DFB2779C21120754EC6A3407F3F
-:10CFC000D13F69790FF80671D6F87BED8D22C05FED
-:10CFD0002AF7E9784FF1F5EB290CF563E97F56392B
-:10CFE000661CD3BFFD2F397C14933506FC52B1BEAD
-:10CFF0007604F98B4D3999DCCE1461F2863490C8F1
-:10D000003089C105CBDFB3613987F25FE358D4FBC8
-:10D01000C34698671AB33F88DFEF75BA815E08028E
-:10D0200039D744DA4DB41D623BA5B72CD26346BD57
-:10D03000F900F1023D5088D93F4841964500AE5B6A
-:10D04000A8884EA603F12CB2B17D5296EBD05E1AA1
-:10D05000F59219E7A36F261133E84330370A6F655D
-:10D06000198928606F2D3760BB229B17BF339066EC
-:10D07000D4679FFAF2DD6CE0D39683541FBB08F6A9
-:10D0800059463E65B1A8E98F62287E17E7F8B17569
-:10D09000A50DF7B9D73E0B1EE6FB1C6F017991BFBA
-:10D0A000CCA1DA5FD12EF75C0E098E4BEE3782FDF4
-:10D0B000E50E3D209152A8CFC7FAAD2BBD5FD37FBF
-:10D0C000D120FD67211E0DDE7F2ED66F8D1DB65F30
-:10D0D0004741B12571C01EF0F6E9D75A38E72E5303
-:10D0E000F3E58BBAD4650117B3DEEF9C46616EFEA3
-:10D0F000BEECDB4EFBBBF888BA5D6DE1EFD1BEED57
-:10D100006B1F735E0FEDA9FDBD9DBEBDF4B8BA7D6A
-:10D11000A0EA653BD0715F7B36BF2BCFA9DB69F7F7
-:10D12000473B5F3A2FD70D49F39A6832AAEA67D690
-:10D13000F59B97EBA6A4795DE551B70FB60C3CAF14
-:10D140006B4A8C5F392FD1EE3B9517D64EBB8EEBD9
-:10D150006B8D83C09DB5BF69E685F57B6BFD57B7C9
-:10D16000BB7DB9769C30F2875AC93FCE41EB67C38D
-:10D170002BD017AD16D47BB5F812E1F26902E87333
-:10D18000F43935D53FC1419F954077F46978FC0F5C
-:10D19000B7007F39F4F4C84CE0EB3920E7109ECC9F
-:10D1A000AFB0ABC1837E8500A7532A4FDA805FEC16
-:10D1B000DA49BF4B63F34AD69F321A985D6123095F
-:10D1C000A467A12F39884D62F638D377061B47DB59
-:10D1D000FFDDDC1E98B37C22799FD2E1B3065B951C
-:10D1E00002F6D93609F58139357E5D2AC58F09EDFC
-:10D1F00012FA8DE6DCF9BD71C0572E39E6ED8AD3FF
-:10D20000F77322761F0CDBD443FC118A5799BA2599
-:10D210006577D3E703FBA9FEC3CB4B00DFAC7E2FC2
-:10D22000D81B753023DACF497D73990DF8E677ADB9
-:10D230007EE09B7533FC6FE17AFF4EB512DA6E1E0D
-:10D240005B3A79AE739AC14BF58CBADBBC95A0F70B
-:10D25000D445CD7E7C9A8862A1EBA8A3FA183C3312
-:10D260000D4431C3D3424CF0AC58C5F4AFB4CA80BE
-:10D27000A18E8E5FD7FDD85FE1BB054A6C1FD32717
-:10D2800023B8EEBAEE57FF06FADA3C7FC000FC6224
-:10D29000D44E03D349393E8C8EAACBC00F92CB65B6
-:10D2A000317579DC2175F92D07C38B3D526414EC7F
-:10D2B000CF1E2AE0C02E0E3F654479B17FAF11F733
-:10D2C00067F1C796EDE07F9AB8D88A7CFDE39F9B13
-:10D2D000D11FB5478E3E0DE5F0D3296857EF7B7B14
-:10D2E0004F8544CB8B7E912A43FD0B5FEA10CEB075
-:10D2F0001C3D7DBFF8E911DBD7D2F78BC7452B6CFE
-:10D30000F4FDB32309E9817A253206D6F7EC3F74A0
-:10D31000D87FE27163E4218A0F1F3FFFD8D377D112
-:10D32000F13F7E3CC721D17DB914E4016D37E16145
-:10D330009305EC8C091F3F3904F8C5E29D46D5BA28
-:10D34000B63A24AE3778D300DF06F3271E5DF31814
-:10D350007E5F72FC08E2DB1E7D58B6C0FAD730FC57
-:10D36000D2B67FC4C1E48D98077C5748F7E7CC0953
-:10D37000CBED7E5A1EBE510DDF111175F949079391
-:10D38000EFB349D2FB42E8AF68B507F4D4ED04F53A
-:10D390009992E37FBCA510F46823D31FB4F3788679
-:10D3A000CFE3E73FA7FD30FEA063FA335D31A5C7A9
-:10D3B000C51C8F5F9098FE4AFF96E550BC5D0C82BD
-:10D3C000BFA8EFFD62CD3C44FF4B1C8C6F38B95DAC
-:10D3D0009D785D87FBF1D1CAFA71C786F59FCF07AB
-:10D3E0002B9B47D4E8FBCAF3372E399845BF6BD83F
-:10D3F000E5423B51BC6F78FC25F7ADF4FDC99D8A31
-:10D400000F54D7869B1FFDF10468F7B82E0AF385E9
-:10D410007AF0479E8CBE9C06EDE66FB18FD525ED68
-:10D42000C3828DDF1F5193C40FBF293D08FA6DE001
-:10D43000F6ED73953D937300BF374A3E68B6387A70
-:10D44000C3F5D782AEB245E71B46EB2B1412D08D45
-:10D4500045D37B063C1B763D73309BD687F68EAF5B
-:10D460008075AD9503D78C06FCDFA6473F96162E38
-:10D47000A7F97ED3EF6332FD7EED8DD6FA8815FBDA
-:10D480003D00E5FD250FE9E2E067394EF9137B7FAA
-:10D4900044A63479BCFB9E31E04FDCA3B7B6039EB3
-:10D4A000EF4965FB107E4A877C9EC4D83A2670BF40
-:10D4B000F1E23F751A14FA3C7E7C555A15A323E419
-:10D4C0002FC0949D747DF50F8F46BA5BB0514D27E8
-:10D4D000A29D98EFC288BA5E8B1F6919C2DF404ACD
-:10D4E00092F14CDB2E636AD80074D5B09CF2E32431
-:10D4F000FDA7E1588701F426ED38A00112B1AF3A3B
-:10D50000C44FE2C5F59AD97AA9CA6AA2EBFD08FE12
-:10D51000C5FCDE12D8E58B245C22593C92D47829D4
-:10D520003C174F27B5F0DC23C57EACE3FC0CFDEFC8
-:10D530004FA5203F3B698B3FFA53C0BF27F37C6167
-:10D540005A95CDFD7227BDB134077D9E01BA00FC0E
-:10D55000B3B1F2A26ECACF297D7F7CCA807CBD2583
-:10D56000FA521AECD7C9A7CDB24CF7E5E35D19D54D
-:10D57000E0CF3919FD4D1AACEBA3684635F8E50646
-:10D58000E3375A3E25E4F97BF0CF4B287FCEF08F6E
-:10D59000C900F8B66580324E32339ACB9A07A07F25
-:10D5A000F19DD3D05CE605BEF15DAB0FE8F3D20C84
-:10D5B0002FBEAF93587FF0E7A7F59F1ECA7808F6F5
-:10D5C000FFD0BEE27490F39F126F3AF0DF29AEC035
-:10D5D0001519948F78AA7BFC3AF0FF4D21BE56FABC
-:10D5E000CDFB3ADF0F6C14CE7309953BF02C0F1A6C
-:10D5F000D05FD2E6C279CD51484CA1783A07E4E237
-:10D60000182C239CE76C9122AD741E73D7A9D739CF
-:10D61000BFD3D8B7BFF4BF8584324620A02D49EDD3
-:10D6200068FF0B41FE51F82D3291580AED77D12356
-:10D63000EAEF169318CEA7E1C9F3C681E0F8570EBA
-:10D64000C7292EFF4D192AFEA547FEB59804AE80C6
-:10D65000711773393BCFB80FE711BAF3CE1173A925
-:10D66000DE7066F95D23E666801F907D47364A8846
-:10D670007F8B6B482C8FCE6B71B7141B0D7AC061FA
-:10D68000B63FA27FB28DB5BB85EB29F3283C40EEB7
-:10D690004F78520AA7523B669E899A60C03FF8BAFB
-:10D6A000A03E9D96EB4907AEA791C4711EDFE3FB38
-:10D6B00007112980E75F0FB37D9B50BF5D07933A49
-:10D6C000B4AF221DF0EF33E2C3FDA3FA04313BFAFD
-:10D6D000E307C0DB9F049FFA2DEA327924A95C049A
-:10D6E000F0A4E5243837ED3E6FF40F00DF077AE54C
-:10D6F0004964C4B4D1A49FBEFA2E87FF0337CCCFB0
-:10D7000002FABF1FF4B76CDE4125F04B22FC113149
-:10D7100013EDDF328EA8FC13542FC272C74F5EB9CF
-:10D720007A632E211BF441F4F3CFD1050E4248EA6F
-:10D73000842BD809F83A47F6E72BC807FCC568A739
-:10D740002E67FBF1E0D8E611CD03D8A762FE1BA43B
-:10D75000684C067EF03C93EFA9E5097D3089BE9EBA
-:10D76000E6FC2D7D7FFC600EE0CD3312FAD3374905
-:10D77000A44DA270F6D06D0139B0497AEF20C88D62
-:10D780004D577B492BAD2FDF3D6DC9CB68E35A7CEC
-:10D79000109F68DC5DA56BB4E2FA999E99D2BC5DDE
-:10D7A000A6F599B7978C05FAA0EBBE7D3A7DFF2BC5
-:10D7B000BEDF5956860F9E55E1C2A5E04FDD1F58CA
-:10D7C000F232D0F5680BFAAD3229AC521DF86C0775
-:10D7D000FDD1435A2468F7401AEBDF25EB6E9F0614
-:10D7E000E5B1ACEC5821F91F42245E8FFD671AA900
-:10D7F000C9E060EF410FA6DDF977617D04F72D7375
-:10D80000627319F49739843D9D86582EF4F39AD8A3
-:10D81000EFEE2C19F8ED322E3797EDAACA74D0EF3F
-:10D820005F3B6952800FBEE6117A5CCC0A7A1C1904
-:10D830005AC2DA73F9B4AC6C6226E0AF335FDDEE46
-:10D840008CDE9F3E0EF8FC1B3A8CB7FCC5EA4FB746
-:10D85000D376971AD83AB4FBF8A70CA6D785CE4949
-:10D86000249264B787669E45FD38744E51BD3FB91A
-:10D87000D2442249767B43FDFEC9D0AE91F4AC067A
-:10D88000BC6A8CA69048129E5F6A19785C81DFA101
-:10D89000733A121E87E89B0BFEC5D7F489D5F300B7
-:10D8A0009FF64AE8070A517B389C3CAF7319249CC9
-:10D8B00031D03CDDEAF7743DAA72D7E7D88E54C662
-:10D8C000D3609CD3B6789A9DAF0FDA09B97526223A
-:10D8D00087F517617C8FC92FF0CF58997E3A0DF6E6
-:10D8E0005749A44D4FEDEB57D4437F8EA4759E9EB0
-:10D8F000692031DC97048E0B700B0F276473F727B8
-:10D90000062FC8F1EE7D0837812FC9F00B27C77BA2
-:10D910005A7B6232A5F9CC4ECBDAD21114F5F673EC
-:10D92000FA0E5BD7827FD1AD9355F49E52DE4BFF4A
-:10D93000C86E1E80E813FA2F53D7429CB9B7CCDBD0
-:10D94000F77E1F4E9B02F5E5A5ECFBC2CEF4FF5817
-:10D950000532887430BD5F49E4075293CA264DD919
-:10D960004ACBA393CA364DBD5353EFD1947359FBA1
-:10D9700093A9B17C9D8FDAB99D195314CA7F4E6665
-:10D98000C566514B94ACD3B9A7D4D072633993AB6D
-:10D990004DDD920F7D6E1C7E4D3EA6EF597D71C30D
-:10D9A0009C528043CF41E00F0D5D924DA274608D7B
-:10D9B000EE8A6119BEF3267D1795F0BB86E87BF8E9
-:10D9C000DDA0FD97C848E76B4B8EB276D10F517E34
-:10D9D000AF6EABC3B8B888FBEA48C09F23F5C57DDE
-:10D9E000059F3C9DE57F4966786D4BB68342D06FBD
-:10D9F00092BF45B47F6774F7EF413D4859F6490B34
-:10DA0000E8A17F6AFC703CE865EF7079B0418A8CD0
-:10DA100080713793E0089077DF6D1CB64FA6EDDE7E
-:10DA2000D5C7B7426C6B71E7A8290A6DF76E6A3CDF
-:10DA30004FA23CA6D15981F07CD715DF0AF07CC9F2
-:10DA400079312BE7C5F3645A5ED259C7DA0F8B6F71
-:10DA500085F226E7B5AC3C3A9EA7B38189731DC217
-:10DA60007F876D607A9EED647C44CCAFABC8FF5D70
-:10DA700027ACA781C991AD546F34517E396BD14722
-:10DA80004FEDA07098F5C314E4633B4E5E3F85E90B
-:10DA9000D5E18052017E53F687720EF9B5827A463F
-:10DAA00016C83647DF7EA4E6F778510E8C6CDE058B
-:10DAB000FA42E6AC529403A519FE0330AE78CECB01
-:10DAC000A64F0ACF034E1BE3CB3A19E3C89977A5BB
-:10DAD000A25E75BF99AD87D20DEEAF95EFC71D4E13
-:10DAE00026B7EE7032BBED868C49D8CFDB927F93A0
-:10DAF00089C2FD6D3D099B81CF2EB4A01E7CEB76C3
-:10DB0000CA3728DFEEE4F3EE5C9F158138F8AD12DA
-:10DB100009005F11FCA3D3EECF7224D9139D65B425
-:10DB20006CEDB31F3BA7F9B32C4E78BA6588970804
-:10DB3000BED459C8BE13F228B3958D9379FF888758
-:10DB4000601D290AF3FBCC9B59FC500BCAF5E9B8C0
-:10DB50007EE2F76781FFE0D8C22219FC41627FDED6
-:10DB60002AF2AF87F5DCC2FDE9629FC47E1E7032E7
-:10DB70007B788E8EEA0574BDFB5C415C3FD513C695
-:10DB800070BF13EA0907404627C19728F1F1F0FE5C
-:10DB9000FF23383DFB6DC0A97139E517F205F00B85
-:10DBA0000EBF0D524C9FC9F805DAC1F01EE4CEA697
-:10DBB0008CE07F3893F25266DDD5887AA19857CAF7
-:10DBC0001DCFD5DE44FAD399566F3B0CFBE5EAD363
-:10DBD0002F7DC27FC8C779F76D13C60BDE35449120
-:10DBE0006FBE4BED9816E02F3CDE5DF1C3C5AF81F3
-:10DBF0001D27FA9DE0D2617F6B247F16AC6F0DDD8F
-:10DC00007713CC7F9A01F57821573BED914D906FBA
-:10DC1000D079432EE61B9C212CAF23BC3C05DB5D59
-:10DC20002A1F25E08F4C5C62C37833C513ACEFBC70
-:10DC3000B918F33E283E84CD504FF109F2E33ACBB8
-:10DC4000E882A0BF9B47623DD8B9689FDE6CC2FEE8
-:10DC500006C013E6DF1DCEF21A3A0B391E2E2C42F7
-:10DC60003C74B7323F2251FC63A625C979B78BF1CA
-:10DC70008194F2F833FF0538BFCE8C7A29C8588CCE
-:10DC8000C57464627F74FFCF3B597C0BF16CEE8FDF
-:10DC900053791E99AF02E07A6F2AC3CB2D661627FF
-:10DCA000DA42F560E48B1C7F45FE5A90EB79F17AFD
-:10DCB000390DF4855457AF9FC00F763BFAA969FD23
-:10DCC000ECB8F41ED85DB3C3BA9811ECA8F649FEBF
-:10DCD00078921D027F1067BB9DF355B291A0FFEEB5
-:10DCE00076F82E0DFAB7A4415CF176F81EFCA42B51
-:10DCF00026A9E2670530E6F8BEF969F97E819857F2
-:10DD0000C783FEE47144FFDAFEA81DE975B910CEA1
-:10DD1000B174B0075A74B88FDA79C637327F737C22
-:10DD20006301E29DE86FB079FE5997F8BE44E5E0E3
-:10DD3000FC89CCBE16F6CB3C6EFF92156AFB0CFC40
-:10DD400023BD655DFFB2D6DE83B8B8BA3DD35B5262
-:10DD50004A13068C977825D5FC05BC0683C3E46F6F
-:10DD6000083721F71E34537EEA00335A42BCDD786F
-:10DD7000670ACA31A7213202F06A9ACB8BFD6E8600
-:10DD8000FC1494ABCCEEFDEC35E1AF50DBBB214B8A
-:10DD9000621BC02B646174747A6F2AD201191A9FB6
-:10DDA00005F95D67F61809E06F93142F06BA3E2D4A
-:10DDB000F9EBB05D4B8A17E8E97DB907E11D020870
-:10DDC000D27985C2FF837945A12EB5FD7B9AFE5796
-:10DDD0004FF1FDB41CAF807E043F00FA47BDA89E02
-:10DDE000C55B9A641206BBEA5279F64294FF376724
-:10DDF0009387F0FD7BC56047093E4FDB1D901C0CEF
-:10DE00006D805E1A38FC9AE4A3D8AE01F283008ECE
-:10DE1000605F815F0B2A93FCB14DEB3EC6FCA4A66C
-:10DE2000DDEA7D6EE8C303E9BC04DF25E105D271BC
-:10DE300098F301C2FC14352C5E9CCACB29B53D98E1
-:10DE4000AF14E27E0BD7FEF864E027A9E551329BC0
-:10DE50003E43C7999E31A17BFB4B600FDB6B7BF28E
-:10DE600000FD43DCAF27F659CCF392EEF5E8A7109E
-:10DE7000FA49929D3962BACA5FB00ABF03BB15C6A0
-:10DE80008BC3AB2CD87E26D73670B946E51FF2D7A8
-:10DE9000791DC351FE817C02BE24EC5EE053C01F9D
-:10DEA0004EB8AAB7009DB6B8AB1F74B9D878A8CF42
-:10DEB00083B174C9E0FE38011FD10EECDFAFF2B7B9
-:10DEC0003DC6F1D569E07C9730FFDAD2575DC2BF1D
-:10DED0008671B4A5923713F0F5035D10FD680B4809
-:10DEE00018FD3B0BC17F459F0D9CCEE773BFD07CD7
-:10DEF000EE0F02FF6C72BC0FFCA4C9E54584E12F54
-:10DF0000D969ECCB8301FF4D0D89A5D2FE1AC1BFA3
-:10DF100004CFA8FABB26926078DF75DEA88A277640
-:10DF2000B275DFCEF7DF5E13D1017FD864667E2540
-:10DF3000C13726AC60FEA7F4B1FEC27B00CF5FD52F
-:10DF4000A35FE2BFF9BE09384D71556F77D1F61660
-:10DF5000B0D3A0DD3D46E497C7A81CDEC5FD21D3A4
-:10DF6000C1FE5C191C0179DC44B1E527DBA7E2B9ED
-:10DF7000768FB91EF0E74D97ACC2AFD52E9677835A
-:10DF80007E22E4C729A86F53B63106F0ABA248C879
-:10DF9000433206FC53EFE9993FB7E9466B10FA8B21
-:10DFA000CB8CCFFC99F3B33FBB58DEE59F7BE515E7
-:10DFB000B7EF38FE88381DF86B92FDE41FF4B65FAA
-:10DFC000CFF36309AE77C3429E87DD8BC732F2A3DE
-:10DFD00094D200F2DD4BE56AE4478913562FC0A5C1
-:10DFE000F6E38685B08E4F675A08C4CBE672BFED64
-:10DFF0005948B873F5F969BF2E8E55BB7604F249BE
-:10E00000D1FE6F3027577F7FEF1ECEC7F61036DF69
-:10E01000709B91F9D7F9FCF71C1F19013CA67A6D8A
-:10E0200018F85C629799C93BAA87027FDDB37B78B9
-:10E0300004D6F39E9EE90B61CA7FD9F7C14DE00774
-:10E04000D9F34B970FF273428B3E1A03FAE39EE328
-:10E050003FFFD56FE1FD5EA30FECBD3DDCBFDE6091
-:10E060008815A3BECCF3121BD262C5E0F77981EF0D
-:10E07000578385964B4179083ADCAEBE38187C0749
-:10E08000EF8F46985E7E94303C08AF63F14A0ADF1A
-:10E090002C9847624D26C6D1605DB00FEFEF1D8D05
-:10E0A000F3DEA0E7EDEF63FADB515E3EFA7C19E6A2
-:10E0B000E99D091830AF36743FD317E7C8DE6DCB42
-:10E0C0008157BE9882FEC2799D6F605C23F4E305A0
-:10E0D00053A13EB468C575E42BFCFD205792FDD4D6
-:10E0E000A749221FEDE0FAA2688C8E7BBA7B848F51
-:10E0F00085ED3C18246AE2F99BC7287C61DE89BD66
-:10E100007A84FF85F60FEB05BB14E41BFAB593E3A5
-:10E110002A280FD47196AF2B9FD6C78BEFA4E3AFFD
-:10E1200070046BDC497A62E8C52CE477EFDFF7799D
-:10E130003EEA131D2C2E704CEF9F057462AF8919B7
-:10E140006627E95FB7B9B9DD61E47A23E583C9746D
-:10E150002FEA2BAAD574269EB7BA19BDA5F2387E30
-:10E16000FF7A91BF7ABD11E427732941BF5EECB7F6
-:10E1700080C7D7261C4FEC837CA8866819C6EF0A97
-:10E1800056C4902E29BC63A0FF1FDB94CAF8095D1A
-:10E1900026F433BF92A0DE3A5FC7F212E61BA91E37
-:10E1A000CCE438B6FF605326C2A16215D3FF12CF6C
-:10E1B00048C817459CB18EB0EF9F6B7B2FACA3ED89
-:10E1C000EB764A6594B592BAB62ACC5B58B4A510E2
-:10E1D000F77F02E7BF738CFEE24D806FCFA522BEB2
-:10E1E000D1F150DF6E80DCACB1C8970C200FEB771B
-:10E1F0004A642D498E8B6AF020A28EAB4C8832FE89
-:10E200000D728324E969420E81BC201AFD518D17DD
-:10E210006195DC6BE77015FC1F21F6157290EAD151
-:10E220006B808E2BAA19BD25764908E746D2CCE231
-:10E23000405C0EF5CE87CBB10F744C6ECE37AEC7B7
-:10E24000E73677218EBB08E225E8FF4F18802F0EB6
-:10E250008617DB06C10B810F3FE3EB68384E6297F0
-:10E26000D3F11A569058E318F64C1D837299C9677A
-:10E270001393CFF0B45C809CD6CA67AD3CD6CAE19C
-:10E280004C0393B7020F92FDF2A08F4C5811D1317D
-:10E29000FF6BAE0DF2F1C4BEDC90E17F227B7C9F70
-:10E2A000BE153A6232792F8272801459C1AF54552B
-:10E2B000914BD71FA2FC1BE82E85C2693B7DBF9501
-:10E2C000EBE54372BD081F0FCFBBD12B0152668512
-:10E2D0007DEA413B3AE12268D70AF86E4DA5DF8D11
-:10E2E00085EF183DF67E6F226D96A4EFABF798513F
-:10E2F0009E9C7D3E15F344A87C28B0D3FEDCEF50F5
-:10E30000FD9C964FEF4945F97E9AF37BA7F0579015
-:10E31000D5D8DF9BB0CF2EC0BAEA1CF0FB12694AF9
-:10E320000EB048A13736DA07F3D3F3FAC29E1B19B1
-:10E330009E1951CE9EB5C77F00653A1FCCEBFD0FED
-:10E34000BEEFA1DD13CBEE82787EC0EA63500D965E
-:10E3500081DE60D42DBB11FC4193752B1277D275F1
-:10E3600034E659315FB8A6E08F7FB899964FECD666
-:10E370001323ECFB8EEBD363F099E2F70C249F1789
-:10E3800046F4AAF3688B77AACB8D5175394492CEA7
-:10E39000AB51102CFF63D9150792F0E43377AA1321
-:10E3A000F7DF4B7C90EF4C74B7A50707E097E2F9D5
-:10E3B000F94ADF1507F4982FF6851BE9C06B00BDFD
-:10E3C0006636E0C300DFED7233BFA8D1D87C1CF203
-:10E3D000CE8D2F187D2DF4AB83EEA02ED305F64AFB
-:10E3E000E220ECA7B1E0E4189083D5057FC738D8C8
-:10E3F000D9BB890FE073D65C85FACDD94D662FD88D
-:10E40000659DF956E6AF78518A484C7F9F3ABE0227
-:10E41000E29EB80612DA78F5097648829864DC5FE5
-:10E420006ABD7880CFF8D19EFA609AC5B68A7E57C9
-:10E43000BF91C9DB06D293067CA03693E15D48F715
-:10E44000A4C144FF59D8E61FD142E7BB3860C1F3ED
-:10E4500031CA974A00F0EB5EE83249FF2FC8647278
-:10E46000A6D1143754C1F87F9F5BEB2AEAF36F19EA
-:10E47000F4CCBFA57495C572E8A70B96CF413BA716
-:10E48000378EBC89E5252DB8B30EDFBFB4C988EB44
-:10E49000FB60AF8478FEC156B6FE051BCD5EC89FFB
-:10E4A000BED2CEECD905F4BB81D77FD50958D7872A
-:10E4B0005BEEF0817FFE43C2C609DB981FEA431B77
-:10E4C0008B77435BE8E7C3DD43508FA9DFB8702A41
-:10E4D000E68B6DD5F9408F207B53D1BFB360EBF74E
-:10E4E0007F7B09F88FA6DF520E70B8D2BECC0DFE2E
-:10E4F00012DA2E10617A31CBC375543E0A7478E576
-:10E5000097137BAE047D692BA5934296E70E7AFAAA
-:10E5100081AD57A15EBA609AC50EEBF26ED9311982
-:10E52000E4C787D3B2655CCF5312B1011CECCBDDDD
-:10E53000F07E81A40406C2A777DDCCCF565560F5E6
-:10E54000C5E0BBDFEB104F285DDD08F2B371AB1EF9
-:10E55000F5DE03D3DFFEC3CDCE3EBA5AA0EBB871D1
-:10E560004292DE13DA72ADC01312AB007B8AC14453
-:10E570004B5FC68215C5301F2D9D2D58D55CCCE252
-:10E5800055DF8CDEC8164A6FA3A8BCCE94985FE313
-:10E59000C2E9AD3EF31BD01BC975A8ECA8FE7C2DCB
-:10E5A0008C7014FE7E938FF8775831AEEB9728DF8E
-:10E5B0005D9FA9603FEB33D9B920E56F4B77BE4E25
-:10E5C000E1E3CE0CFE3013F41FE22F033CF2266C85
-:10E5D000D570E6C7CAF538B285E9CDA0DFC37E6F36
-:10E5E000709147D726F91DEECB64F611A5FF56E8CA
-:10E5F000E7F45B7F3F08FBD3947F720C8B77FE05BB
-:10E60000E383D66E1657B6FA121837D73B03887FC6
-:10E6100082AF877C4CEE68D7753893D97321670237
-:10E62000FBF98587D1A1F0B76F5E6E413FE9666760
-:10E63000C4CCFC0A610272696AA58EC5C5B89E7514
-:10E640002DF73F9ACA5F22100F2397B1FCADD7CBAD
-:10E650005F523268F9B795937C786EAEFCE1F62292
-:10E6600058F7657A5E3F240CEBFE4F7F15D62FF5E9
-:10E67000E8BC40D753CB591E22A94F437FC9EBE5D5
-:10E68000EF3BE726CD3F404C5E2BC593E9D4C8490C
-:10E69000CE9BBBEE32B3D79A845F9F7648B54CDFF2
-:10E6A000F5A6CF18CDFC212887CBD5F058EA31E06C
-:10E6B000B82DEEAAA701CE575EC1F6E3A3A78C1131
-:10E6C000E07F1FF173285AF8EDCDE476E86D25AAB6
-:10E6D000F8BCD310CD07F9F8B1A4FE6E51BB0EE320
-:10E6E000E30BDB2512A1E37DF4F873F9C0C74FEC0F
-:10E6F000782E7F76D27CB4DF89E72B991C5FB91F17
-:10E7000050EBD71DCC9F2BDA9DD94882A6217DEDF9
-:10E71000CFD47F81FEDCD9DDDC1FECF70F75821DC5
-:10E72000C4DB6BFB4B70FC90BA24F477087FE6D116
-:10E73000430F43E4A477FFCCDD857272DEA1784EEF
-:10E74000E0FB763DEC1B5D8AB99D9507DBAFC1E828
-:10E75000711DC89FF17DFB76B47D483AC0D1D0646D
-:10E7600055083B0F56027AFA5662F1013D19B23D47
-:10E7700056E05FCB4D6963E09CCFE766F6745AE8DC
-:10E7800093EA6B79D925F8DD1D7200F3DB3E973BE8
-:10E79000F03CE01DBA66CC9BFE8CCBBB5C5B60D7CB
-:10E7A0007CB44FA298474DDAD5F075B732F991A8ED
-:10E7B00033A09C1270BE74F60FD04E1D607F3602DF
-:10E7C000DE6457B277A59E42AE2FC7314E60AE24AD
-:10E7D00036B0E75B2F09E37CC4FE84587322754B87
-:10E7E000A827437E4A8A03E3A161FE245607E98DE8
-:10E7F0000FA470BB9668E201946D85A19D9827B027
-:10E8000031C873B9DF1EED282EC7782AEA9FD02FB2
-:10E81000BC9F5DAAA03F1DDA19C67E3DBEF5E2256C
-:10E82000CF179C2ADED75B068C3F4C857337B47DAF
-:10E830001E9583A0FF119F5E75EE660BD59BC11ED2
-:10E8400013F15D9D1C2DF3A01DD21307FF88A1C2FB
-:10E85000E405B99AA28B96C0BE69E3BDB45D21CB35
-:10E8600033C8B5835C11E76A9A964F0C40DE7AAFE5
-:10E870009EB197D9474D7756E1FB89DDCC7F1E6A63
-:10E8800037E2B9C0509784F1AAA6802162423F8640
-:10E89000B705F62B4CF530B01B3BED2CCFA9F36A36
-:10E8A0009B2F4C92FDD7F16D77A1FFDA8A71BA7F69
-:10E8B000367E79269502E0A2A4F854BA89C911EEF1
-:10E8C000DF76737C12FB2FE859C43B534B0385A0C2
-:10E8D00071EF76DFFE1BCBF86F901742C6DEF7951F
-:10E8E000792164EFB570AECD04DA3CAF876951B9D8
-:10E8F000D97B4ECEECC5B8566F3DDC6F60EA92F81E
-:10E90000F78BAE9DA4601E282F57AE83BCEEFBCDC7
-:10E9100044355EF2FC144DFF7ADABFD5CBDB876F4E
-:10E92000BE66D2508CEFF272D78FFC747EF7EBD5B7
-:10E93000FD210A8A737DA6BEF12A72E4FBD65DD65C
-:10E9400027BFA93C5FE671F5C9F17BDF9EDA7191C3
-:10E9500017E8EB33CCAB15F238E46479225ABEB534
-:10E96000D22309FD773288D8D533EBF03E80DEF82C
-:10E970006EF7343FDC8B20E2BBA11501CCAF05F96B
-:10E98000EF41F97FF2837D04F4CB8F50FF0F9D534D
-:10E99000983F88EA1112C543537715FA3D216D144B
-:10E9A000E4A6D8FF455C2E81AE0EF81DDA72D30EB8
-:10E9B0001DAD7FC7E35F87FD723B503BDF1D1E66C9
-:10E9C000BF874AAA37013F208F4804E4F6DA924F06
-:10E9D00051CF687A7ED2F8E4FCF0855D0FB0FCE29E
-:10E9E0009DFA01D7BFC3A363F931CF3F83FECC8F1C
-:10E9F00022EC584ABD12593301FC2AF532685AA458
-:10EA00003C527733CAFF99741D745D3FE27227B49C
-:10EA1000F3FA30E4AB87E87F00B2CD81F9A8EF6F5D
-:10EA20009E69B242BC2654327B09D283CDE287F57F
-:10EA30006BE7D91B1FBED382FEC6B55DFA5AD09BC9
-:10EA40002AA89EF42B3ADF3CC7945A1FE54B39BAEB
-:10EA50005D65DFB3425C7D60395C9DCDF6B14D0AEA
-:10EA600084BF538EF98C24394FA7A08BE963DD1E38
-:10EA700083EA5E886E0FD3132F0BF74C049C7B51F7
-:10EA800089A7805E1C22FE4FC0CE2501AB17FA81FC
-:10EA90001B1540CF72AEF4A23FD7E48CFFE822D41E
-:10EAA0009B14B433841D71FA79E6FF1A9E157C1508
-:10EAB000F0B24217FFC977006E3F62E77589C2F86E
-:10EAC0004DFEF5D6B1E0AF323BE33FA9F5627E0DD6
-:10EAD000FA1FD22F6FC37D78D1496C009F89E13A2C
-:10EAE000454A9233826F4CEC3D17E3443F693567EA
-:10EAF0002FC3E86E7D6042146D3B9FD1A7171CFAAF
-:10EB0000FB0C055E0A7D413605D19EA99949ED436E
-:10EB1000C0CBD5898332F8E59D3DA82F3646251C0C
-:10EB2000A7B1E49798FFB698E759F5E63B2971CC71
-:10EB3000FF7ADF93C2E3036D4C6F253D68FF922798
-:10EB400019FCA9DCC4BCB03EBDBD05DB89FE0C3C94
-:10EB50009ED0C8FD351450587FDA23E209AB78FF08
-:10EB6000228F8D8D4B146F45B27F61C3342A49705B
-:10EB70005EDE3498EF13E6C0E7404747EB65E6CF2B
-:10EB80006E4F89C021CF0D528F1FFC8EE1B281CF15
-:10EB9000B358B3181EA5EF4F4C467FFFF383E5BB78
-:10EBA000B2FCD64DE347627E7879D72793013F4880
-:10EBB0002D417AA4FCE282F25DED595E1CEF5BCF41
-:10EBC00077F549FE87E83327CBAECE77F531B88BA2
-:10EBD00038A436CFF574564C617969F16D3B407EAF
-:10EBE000761931DF6D6AD72B47C00F39D544A2188B
-:10EBF00097D5E8012F665C3F348BAEE3CCA90FB606
-:10EC0000DD4320DFF9591FCB9F53CBF5C1F4788C3E
-:10EC10004D24D97B157C1FBE2D3D5EF0DD10B78BDA
-:10EC20003E96123F2E86F5EDD5D9063AA732314BE6
-:10EC3000E0DF20F91ADD03E76B887350B5F1425528
-:10EC40009CE95AB19E6F18B70A802F7980B895C297
-:10EC5000F3B01489B100926750C5AD147BF16071B7
-:10EC6000AB18D63F331CEBEFED17B762F9016D7BA4
-:10EC700033BDA0A737B8128F3EEA85FE0CD84FDB14
-:10EC8000F32911C83B6FE3F06FB8F0B8D5C2AC01FF
-:10EC9000E256DBB91EF67E891C3350B86E276CFE37
-:10ECA000E16E11BF92D11E4DDC9727E68FF567EE1E
-:10ECB0001B857E9F39222EF522F387CDE1F1A7F740
-:10ECC000A71763BED660709ED3AEF6EFDFC5E17CBA
-:10ECD000D65C857EF51FFCFB34F433CD077FFC90BA
-:10ECE000BE730984FBE5BCEDECBCB977A714F1B2A7
-:10ECF000F88849461DCF26C3FBC5941D6E06161A1B
-:10ED0000A65873317D2D51A8D17A6F1B2D53E55D27
-:10ED100059A3843DB4DDF62329E807BBD7E9C5F93B
-:10ED2000DEDBC6E2C4E175526418EB17EFF10AB7F7
-:10ED3000C97EE8E7A7594C5EFF2A8BF921BC9AFBF4
-:10ED400001DAF43CDECBC76B21720C9EB2C49EF795
-:10ED5000DA94DA81F400D15F9BBED95405F0CE631A
-:10ED6000F7859C35F867A29FD8518CF702B5A53678
-:10ED7000B7D7B27AA4D9B3E64400EB2F57986249CB
-:10ED8000BC0E98EFFA2CA6A768E13CAF435DD6C64F
-:10ED900069B4E7A0E690E0F0AC21FDCF09ADCF6209
-:10EDA00072ECECDA42BE2F3E8C7BB4E9BD6F1602EA
-:10EDB000BEAF61F7FEB4E432B8C979EC5964AFC1B3
-:10EDC000FBD9889DEB6384CDBFE872A704F4D066BD
-:10EDD0006778FBAFCE5B3BDF17B28A197CED8C5EA8
-:10EDE000DBD64811062F36EF0BF56FBC25F8D2B7EE
-:10EDF000C417DF977C8FC60AF13BE40BE1FBF448B4
-:10EE00007747492487E53FDA906FCEE6F6EA512E40
-:10EE1000AF36D717A5413C73CEF1D5787FCFC4EB81
-:10EE2000AD38FFA617CD688F35AE88E7033E6BE19E
-:10EE300008B355043F9521EF98B07B5FDAD5F139DF
-:10EE40006DDC7585239000F9D2541D2F86F8CF0311
-:10EE5000F2FBBB5E617C0DE563D38AC4A3E02F0E99
-:10EE600038829F43BB9377BE3D59F2E2E7C8DFCEBD
-:10EE7000EC1D8EE7FD66B7A9CF4F9175EAF81F69C3
-:10EE800077B073629DEAF7705E48F55DBF7820D376
-:10EE90004F36188223407FBCF20A96EF706AA14C6D
-:10EEA000603F4F99098FB30B3EEB2B4E9603CEEC90
-:10EEB000C1E41D6D0770E6F99DA27D23EC2BDDCF2B
-:10EEC00006BEAFA79EB9B818F6F5E4AE8B8B615FAE
-:10EED00037E83BFC4017275C414F36C597639302E8
-:10EEE000A8DF897CD60BC5B7E183CEEB7F470E97B1
-:10EEF00067FF737218FE92FD1E2FFE9DE59D86BB77
-:10EF0000D979D13E7FDB4778EFD59973B2047C780D
-:10EF1000B0FE5EF730BCF7984818FC1C15D571FCA4
-:10EF2000AEE20B99803E27F458EDFCAFE2F09B99DE
-:10EF3000EDFF15E8A3C23F5BCFFB36453E63FAF217
-:10EF40002312FA5F4DDE70DA04B48FE68DD3215FB1
-:10EF5000F9159E6720DD920DEC8C858FB460FDE97C
-:10EF6000AE39582F9B6231B0A71A693D94575FA6FE
-:10EF7000CE4FD6EF2E8B25DBAF741EBF00BB24C552
-:10EF80009930007E36817E4CA7D8A4303F7593938C
-:10EF9000A07FA4BC4B6DEF89F8EBE600BB5765730F
-:10EFA000B784F72BB90DC1C25CD8574D1C765EB63D
-:10EFB000BF0DF04EC4C3A7B8FC0BB259BC3C1FE058
-:10EFC000D494CDE617D78BF373EAF37D87F6DD880B
-:10EFD0007AD05F49207DE0BCB1882A4E3E9F9FBF1A
-:10EFE0009CCFCF5F027F8E69F87372B921296F2C95
-:10EFF0003650FC3F296F2CF9BBE4BCB1988AAF7541
-:10F00000F0F3094B313E1DA278BE7C6C1F1E3610FA
-:10F01000FEB731F13E9E4FD96944BF5803CF170D5B
-:10F02000D51F457B2304E75D183DB2BC6A7EEF40E7
-:10F0300003B5E3306F36AACE2BFD69F6B72B0F442C
-:10F04000BBC1FCDD8F0A7EC0E951AC4BACA3A15B18
-:10F0500062F4A399A7D67ED5FAAD85FD79A17C6926
-:10F06000CFB7BCEE6FCA975EF996F8523FFFFFD05C
-:10F07000449AEF5BF0FF9FF076B8C125D82E317C23
-:10F080009DACB3FA597C51C7F20FB47157EF648C41
-:10F09000270A7FABE9595D645521B6C7786AE3DE7C
-:10F0A00054CC07A8F7D6A39EAD8D332E22BB26C322
-:10F0B00016FC95BC86E7AAFED5B8FEE9ECDEB87E64
-:10F0C000E1378CEBFF35FB1BC4195FB27E96114C08
-:10F0D000C293EA52AAB0970E9E77A5CB61FB9EC25F
-:10F0E000F33F4C4A98D893BE1FECBB941C16677F25
-:10F0F00089E70BDD9F9A82E7E83D06768EC023B351
-:10F10000BCA677A8B69FE30239C0F6F167CFDF440B
-:10F11000204FF067FA289E6B0F375A7D20BF84BFBF
-:10F1200048F4DFCCFD98174A3F4539FFBB7CA33438
-:10F1300047FA6671B28D14064974A5A583C1BE1B3A
-:10F140008CAF5C9E13A8CC41BEE51F83F1860BE417
-:10F150004729E5945F837CDE6DF482BD60E2E75D64
-:10F16000C8BA2C95BD3DE7FE3C945BA7CCCC7E1085
-:10F17000E772C4FA0383C2FB9FD3EFF6B902D3014F
-:10F180004F8E55F931AFFFDE542657128FB3FC1E58
-:10F19000EDF914AD3C11E72BC47873C5FEFC1FF1EB
-:10F1A000D325023EFF223FA5F215FD2B83C653FB5C
-:10F1B0007D1F66F79154F7F8799C09CF2B887985E4
-:10F1C0007A585E5C0B9F5F2FBC38FF3F98E35F056A
-:10F1D000FB70F22D9309E297E5E58C7F3605ACE8EC
-:10F1E000FF6F8AB27C98A61504ED7C710ED59D192F
-:10F1F0005C07F878EFDB56BC07B4A96B7B7B11E6A4
-:10F20000090451AF3BFD167B7FD01DEC80FE432BE4
-:10F21000E2AA3843C5F9CF56D796E37CD14E771A88
-:10F22000D5E77B7E99C3EC6FF1FC452F7CA95D424D
-:10F23000BF3B59CFF2B0434EBFAD0AF303981F3B1B
-:10F24000C5DB83FEE7A6DD282408268542FD5DB9DF
-:10F2500088374DBBABCAF05C7FD45C86F7C1BC631A
-:10F2600045FBEAE49DD9111DF37B3F06EB4A2D8F48
-:10F270005C0DFA65011D07FCD827775D5D86FE40B1
-:10F280000DDD097AEB3DD779AB29D22AF5D1E3061A
-:10F290003D938F42AE3D08CA2CE647F0FCBEEE69B6
-:10F2A000649EB5AF6C75AAF31E67664F7A10E6F3DD
-:10F2B000608EC2E3D32C1E5E68A2D667517F3C2CC1
-:10F2C000E4F1F0693C8F81844D7DF90B455F1F0FA0
-:10F2D00017F31365110F4F39C7F4DB229B01F1229D
-:10F2E000B59DF10D42F102F4EBCB123D13E13CD59B
-:10F2F000D0CED86500AF74003FE691C67F7411C4CC
-:10F300001D3294CB20EEB06DF9D8FD2627F88F7A08
-:10F310002E87ADF176D8AAC1B47467060E039E108D
-:10F32000A5B904F0BFFAF77A966FB82605E57D67B0
-:10F330007E03E61B9E7EDBA83A47A37D86C92A0F83
-:10F34000F8898ADA7F877EFFD4DDD28079A419A07C
-:10F35000F48F67EDC1EF94DADE13AE043FCA7D127D
-:10F36000BB4B91CE5EF280FDAFC8A077CCE962E7DF
-:10F37000B1E774D8AB4DC84F251637B9CC897C524C
-:10F3800059738D0CF699D242F0DE324B2EF35B0F9F
-:10F39000EBB4C9B0EFBFFE5237603CEC6F1CBF212D
-:10F3A0007F0DC0D5684C1C8490BD88E389BCB5C175
-:10F3B000EE0317F248ABC7F6D35FB93CEAD5E335A5
-:10F3C000783CD87702BF053EFF5A4F500FFBB5641B
-:10F3D000C2735A02AFDB441EFE97CC8F5BC0F36250
-:10F3E0008EAEFD9F31EC3E3F110789B07B25F5F1D4
-:10F3F000D53908AFF8156158F76EBBDC548AFEAFFB
-:10F4000026EC670DBB7FACA07DC8AACA7278DA086B
-:10F4100080E0E89EC5054097618A07C306C0832344
-:10F42000392CFF48599382FBA6ACC79B968962771B
-:10F43000E3BE290FB0FD793387AD47C461859FF2E4
-:10F44000604EB004F26B7BCF572DB7B0F355FCDCA8
-:10F450006EEAF2B79F82734BDBB8BF78FF8BA3F0E5
-:10F460007710CEAE5124F01B9DB5D71580BD372E39
-:10F4700097E94BA94A0FB15993F1733FE6BD16EDD9
-:10F4800065F97B0ABFCF4859E3DC0EF02CCD08624A
-:10F490007EEFE56D31FC0981176DC730BE46F52260
-:10F4A0003CC7FCD1F392D08B54F250D86B5A3BEC52
-:10F4B000AADC6F572E7E9D9E343D572D072FD8BE58
-:10F4C000226A3BB3B7BDB01BB57684E6FBC1F41F1F
-:10F4D000E20FABF25BE6E57A851E87F23D9BF346D1
-:10F4E00091F7D27B0E9944CC709E017209C4FD58ED
-:10F4F00090FFB351B2F8404FD2E6FDF4E6E390E658
-:10F50000E12C1FA4F92276BF44F3C5F014794166BB
-:10F51000C80B49CE3F4D65793D66C80BA1EF5B072F
-:10F520003DB7EC6D81F13BEFB68973CBCCCF5E4B31
-:10F53000789CE1213CD79CB82117CFC94CAC65FE23
-:10F540003B47C020035E3EFB0F9D1FF86E82D22D0D
-:10F55000E8578EA1FE2CD0B7CCB41EF24D7ACF2D39
-:10F56000D79101CF2D8BBC2411A7CD1EBE4102F92E
-:10F57000D39B2F12EA3BCF0CE3762EF1A27FB83754
-:10F580007FE9BB04D7592DF88C49BD7F697ED62E03
-:10F590006DA601F50CB71C7C1CE3789B7BCC78BF77
-:10F5A000446E11EE5B6B6504EFB3759476A0FFB506
-:10F5B00025C3BF39D7D5873F627E64235BFF1938E7
-:10F5C000AF25F58D7B66E117F9A04F55771B191E06
-:10F5D0006AE6B1B9F7DE143A0E7DFE2297EDBF4F11
-:10F5E000A3DF8AE72F047D713E2CC61F6C9D021F8E
-:10F5F000BF4E6FD7E257B89AEFCFBBE608CB3B526E
-:10F60000E3D7FE95B5E38E515E726065009F67CCCF
-:10F61000525407F941E6C42CE08077E6CDBF0EEEE8
-:10F62000D338939AC887FB385AF2A77E07EEDF38A3
-:10F63000E34ABC0BE5CEBC7F63E561896D703FC7D3
-:10F64000CFF3145686B1B2097965CBB9EBC2A57870
-:10F65000AFD5EA1E904FE59A3C13CD3D02900F893D
-:10F66000F71E58D97E66F27C5452C3F577882CD1A8
-:10F67000726B56990FF208ACC4BBBB07EA738DECF2
-:10F68000BE01C2F29F5A8715B27C058EEF2497FB0C
-:10F690009F493C0CF8DB5A68C7EF7BF9F56E238F66
-:10F6A0003BB1F1DF78869D131379B684D8F240EF31
-:10F6B000B17A89AA2CEEE1208A2D0FCEDDB70ABFE0
-:10F6C0001E2F1FB1044FE426E9456F4CBAA3147FE7
-:10F6D0008FE3D9BB86C27AAF32A8EF33EEE5A7F944
-:10F6E0008C1F9EE1F7FE7558829F423F4752664D40
-:10F6F00086AB5467665419ECA8A73DAE037EE4E2DE
-:10F7000078619FC1E667AF0948F03B18E2DE3D57DC
-:10F7100050417F000976EA407EBA8E05309FAFC126
-:10F7200094C857287E7D610CFE03E8E16CDD7B3FC9
-:10F73000C03860F61BEF42FEC51BFA8E8969202F88
-:10F740000AF97D0ED4F00B3B41DE15A0DDD77B4FCF
-:10F75000E73009F9C3D419ECFCE9141255D0FF6263
-:10F7600063E7A1269717FA5AE9785379FEC6E4238E
-:10F770008134F0034CBE29AEB0784B4249CE97108D
-:10F780004FE2D17B93E9E06A6F5299C0FDBEEAF285
-:10F79000B53E75F93B955F0E4F2EA7533B206F3C4E
-:10F7A000F0AD389E270E5F426C6C5D2C2FF0E7DCCD
-:10F7B0006E1BE521A602C85B744A61B00B463D97FB
-:10F7C0008D7194E72A0996DD3B4D0F9992D7BF5E64
-:10F7D00066715AEEE716BFE3037520579F7DCB8D08
-:10F7E000F0725B65E4A7E001077CABC8315980BFCC
-:10F7F000EB389F17E7AF27A599F0FED5D625ECFE8D
-:10F800007FEDFD93AD7ADB3ED8C7D613740D749CA3
-:10F8100047520D31390DF68B1083B38F1F0BFC81CE
-:10F82000FEAE00BC1FCF7E678962F9D0E4FBBF5BF0
-:10F830005D6CAEAD772B3C3EC77EEFA1A4F7F71F02
-:10F8400028D9D1F6A05312A413161FCB13EB248A88
-:10F850001FDA67115166E7ACDCBC2CEEBD24A44A6C
-:10F86000C1FB7224D1AE05CB0FF27652F72B7F038A
-:10F87000FC189A46D7439F4BF2189F78587E632313
-:10F88000E28935E8053CF1A50C7CEEE7B63C46374D
-:10F8900093D22A3D9037D09AE5F3805E25E023DEAF
-:10F8A0008B7E45BD18CF973170BF4B78BF517E6EB0
-:10F8B000585BBF388FE96DBDE3EA69BFD6AF18D793
-:10F8C000A51EB7F7BBBC81BF13EF457BFC79A60A29
-:10F8D000A03306B7293C5F9594A8F35348A5CFC43D
-:10F8E000F8BD3A1FE52A694516D0E7D5A6C6EE3819
-:10F8F000FDFE158E2757C9C1BF40BCE19559C5070C
-:10F90000803E6BE18279DACF3524B61A90E54C550A
-:10F91000F067F621C82FDAF2E83A9A74C1E10E5A7C
-:10F920003EA5EF18BAA410E9EB9EBCF1FDE727F065
-:10F93000B0779E14FF60DF05FE69E72DF0805C174D
-:10F94000C5C4BCAD24864F0F61F9D0547EB1BC67ED
-:10F950006F5EDFBA28724E36350F05F9FE4A4B1836
-:10F96000F9CF55F69F60FED78305C1CD30AF99170B
-:10F970007D82F7DD104F1DEA5B74BE3FFDBF9C2FFB
-:10F98000A5AB2C782FF440A1EFF5CB033E6150E5F9
-:10F99000018BF969E958CC2344D83D4613BBB7A382
-:10F9A0007E179A61F5C1798D10E4B79663FC0BF36D
-:10F9B00085F770BB2C2CB1BCDD7EFAE2E0F9C2EC1D
-:10F9C0005C7FA38DDD6723EE45FA7E91B8EF86CD8F
-:10F9D0009BF22F7EDF0D963BEBBC68FFF5EA8DF3C3
-:10F9E000981E7A65B1A50DEE0FEC7FEF0DF3EF9148
-:10F9F000E78C5EAE27A2FCEE4C65E39C32B3FCF4D0
-:10FA0000243E4E2477DF7D5C1BF44C1FFC635E219B
-:10FA1000BB5F44F655C07E6C86B895AEBF1FF284BE
-:10FA20002BF867C0EB79A5FE7CF8898D3906E6676F
-:10FA3000A478B5A587409A5BF32370DFE4D5A4F9D9
-:10FA4000B03C04F1EABFA1FDCC519FB07B28FBF094
-:10FA5000EA0386576164825F47A72F6604CF40FBA5
-:10FA60004E7BF49DA67288331A11FE228F504BBF35
-:10FA700049F339A667F371C23DB7743E9F0F349FB7
-:10FA80000BC1EF643CCA240C8F07C373C8D74F1D4A
-:10FA9000DB87E7E92468C81F9F84EFAB7DEDBA21BF
-:10FAA00003CC5B67C57DBFF166168F09A5303D1598
-:10FAB000E232596EF03FB1F16F5CC3F0E346B3112F
-:10FAC000F1655A7723C65F480D8BA7F8E8FF603EC3
-:10FAD00033897F12FC54C6F5B66978FE72C6547538
-:10FAE000BC65A6E92A8CEFDC40983FEDC6197AD5B3
-:10FAF000EF000A38CC24EB3E817C8E999ADFFFD34D
-:10FB0000C2451BAF11F068ADFC6ABA1F91DF1BD76D
-:10FB100019FE0DE33ABE7C963F7741719D03FA04CE
-:10FB20009EBB7FD9B560CB124A17C37F5A8AF7664E
-:10FB30004F722F7C643D2D3FB67924965F76DFBAF5
-:10FB4000EC0DA8DF568CE51AF99359788F79C5CD5D
-:10FB500053E0BEF10366D68FC712EC84DF8FF08CC2
-:10FB6000291A0B26598D2181EDAEB9A8711CE4C16B
-:10FB7000D45858F9B5B2FF1A8BE5225E1EFBC24875
-:10FB8000281F903E9935505C6854891483DF89AAF8
-:10FB900071B0F653C73E9E0D7E829A6A561EE5AB43
-:10FBA0005A3304EAE54F670D248F67E573FB89EB51
-:10FBB0005B014EEFCFF9DF6B83735E01ABE483FC37
-:10FBC000FE40E57BEC9E2B13CB2308F8CB14B80743
-:10FBD000B1DACFFC7B13AD2D59C0FFAE0B1ACAC1F1
-:10FBE0008F6BB316B6C17DFFE99555E361BF275210
-:10FBF000350CE41FA5ABD9F94057177F929F867A41
-:10FC0000889AAE04DE4E13F454A3A61BCA0FEAD999
-:10FC10003EAAE981F6DB88FD5EAA964BBDFC5D43FA
-:10FC2000B75A7C1C54EE13351FEC954FABA3889745
-:10FC3000B9849DE3D90A78CAE8F7DF607E06B9C7C0
-:10FC40000BEF0B24DF484CAC18447F10F303B5874F
-:10FC50008CED3F2FF85384BEC86660B3B9615C5623
-:10FC60004FBFF3C38F7A8979D1F17F8CF059CDE6FC
-:10FC7000B3556AE6BF13C1F47261F73689F576A908
-:10FC8000D75B6161E7D13D84F21DF4DD978DFCAA5D
-:10FC90007987B89C9D610ADC67A46BB8C13E07F701
-:10FCA000F926127E06F49BD72CC108CC472787F78C
-:10FCB000C625F89D073FC693E93E6ECF4FD217C4C5
-:10FCC000BCB4F0681A84AF6AE7AD8543DFFEF4A0E8
-:10FCD0007E96C57F0FAE775D9AF5B4F2FBE01365B3
-:10FCE00046559EE86B752C0F56CCEB358994A09C3D
-:10FCF000942C1847EDF53B69F9DB20E7D2847C169C
-:10FD0000F3BC839F8BFA5C667CEF0E5D0CE7595069
-:10FD1000DB630638C6F38BD87DC67CFEAD95616C7F
-:10FD20006790A501E3C4F17C59E457A8F65BDC4F6A
-:10FD300026E25C02AE4E833717F33D35F09C6D3200
-:10FD40000E1C57D5C65F07692751F8E538FAC35925
-:10FD5000C4CBAED5FAE1AE66FEA96BB91F6E622DBB
-:10FD600083BF63792ADA6D8EF2371432BAEFFE64FC
-:10FD7000B11F3DCEE049C423253E1EFC04AF8F7F5A
-:10FD80000CE344E29E422D7CCE0D029FC1E861B09F
-:10FD9000F91FB104BE80714F493D789F59C263E39A
-:10FDA000CE836021D08BDD565805FE05CA57CF9F04
-:10FDB000076313AAE8FE2D770565B853EF2612985E
-:10FDC00004B9D78EDAA09EF9E709FA8797723B71DA
-:10FDD0001297EF9F3EC9CEC1D7F8473C7819E89FEC
-:10FDE00087F424E2853C6E069F4FB7E850AE2F782B
-:10FDF000759C07F4F3F739BE0DDF28AB7E2F6E44F8
-:10FE0000C4A2BA2F63D44E87AA3C3A9AAD6A7F51F6
-:10FE10005791AABE2C3652553FEED05855797CCF1B
-:10FE20000455FB8B8F54ABCA97C4A7A8DA5F7A7CC2
-:10FE3000BAAA7C79E216F57D1F617F4F891BEECB54
-:10FE400067F0B8F2DC6C55FB8FD3261F02BA9BBB60
-:10FE50008EE56D5791C5AAEF17EB1A301F9A7430D3
-:10FE60003DA699FE8F9F3757304F8CEAEF1900B7A8
-:10FE70008D6A3DA7BE7BFD6AE0B5FDEE99D0E83303
-:10FE80005AFD65B8B30EAE69269717B0F3EDE4627C
-:10FE90007231FFFD10EDBEE2B9FD4F0FEBD08E5871
-:10FEA000FA2AD3EF973EC5F2E18AC9B0743CCF7508
-:10FEB00048472212DC5FD0BCE132A94F8FD1C2C5C6
-:10FEC000E851EFB3D9ABDEE79412F53EA7FAD4FBC5
-:10FED0009C5EA9DE67BB5FBDCF19B5EA7D7605D410
-:10FEE000FB9C3953BDCF5941F53EE7D4ABF739AF51
-:10FEF00059BDCF05CBD5FB5A185EA4AA177C734811
-:10FF0000FB52D5FB56295A413925991BA8C77B1BA3
-:10FF10008675FC7040FC10FB1FA6FF63F4DC8CF9B7
-:10FF2000F5F3E9FE437EFD5FC9BA83108AD2E24150
-:10FF300053D77A8CAB7D533CB8BB80EBA762FF2FC5
-:10FF4000503FA5F2B015F802D5635617807D3D9C51
-:10FF5000DB1D8181F518C1B792F58664BB7A307ECE
-:10FF6000D64F4E723B7B5039A9B1B3DF82EC26D419
-:10FF7000C7D7A15FEB668ED79FC1AB4BC0AFFA343A
-:10FF8000CAFFB7E8442AE9BCDE8279D371DEB28CBD
-:10FF9000423FC8AD24A6C77802646EEAF0DE4BCCBF
-:10FFA000C3ACA37A393CE770FD601EF7937C610C0B
-:10FFB000EE2C60FE9102378C9BDBC3CE6FBD967139
-:10FFC00041F73BFC0EFE49DBFDA92010857E6A4C03
-:10FFD000DE650FD057FBB9FF894C65F99F44098C4A
-:10FFE0004EBE4FB1AF1F16377D410A06D1CECE327D
-:10FFF000F9C0CE1E95434C5920DF3C91228853FD19
-:020000022000DC
-:10000000BA4016712A942B23398E3C951D5D6A47A0
-:1000100078451C1827F886E3FEA6C07F10F041B48F
-:10002000FFBAF51A0CD125CC9FC07EBFE430DF9714
-:10003000876F34C6C02E1378742465D6419717FD98
-:10004000E187012E336FBA7A3594A5FD19DEA574C8
-:100050007E67EAE268DF53F81F81F11B4C14FE74DF
-:1000600089A7F282C3D301190219DC4919183DD0BE
-:100070007924319F8912C70B4BF03D1867BFDC9381
-:10008000EF0378283D78FE8E5851B921A70C03FB69
-:1000900003051CAA53F26EC3FB748D461FD817D5F7
-:1000A00012DBD76319B7CF82D8E23C39E08EE9542E
-:1000B000F33E03E335D8EA0AB28AC0AFC6E70D3F84
-:1000C000028A70F7960EE827E7F3861C128CEFDEA3
-:1000D0002D89DFCBC1F273613BC6338CF26787E1B8
-:1000E000F7FD12A3658CF76DB1D0AE29BEFF27874F
-:1000F000B7B8EF9CBE67F97916F6BD67838CF1A39C
-:10010000FF07EF54F02D0080000000001F8B080057
-:1001100000000000000BE57D097C94D5B5F8FDE6F4
-:100120009B2DC924992C6421102609598010266121
-:10013000111471588251034E006531E24C12206453
-:100140008100DAC64ACD40D854A8A122A2A20E0846
-:10015000141568B008A8D1372C527CDA8AADB52EB8
-:100160009597002A3B3168A57DBEFA3FE7DC7B33DB
-:10017000F37D244F7CCBEFD7F7FBC7D777B9DFDD13
-:10018000CF39F7DCB3DD3BEE31AF2E6043187B7E19
-:100190009ECDA92A8C7999C3CC54C6CA99CBCC32AE
-:1001A00018FB7CF4BFBFD1EA602CD2E1B13A8632B1
-:1001B000764F9C21F58334067F9E012591908C8C8F
-:1001C000632C99B1EFF1EFA6AB53C67C8CF5C074EC
-:1001D000B5810D636C929DD1DF2C180BDB4D662E23
-:1001E000138E7307F39870DC3F5C34BB5814A4067D
-:1001F000282F606C2AF3D1F7E9CC4FE95D2C40F54C
-:10020000EF66AD947F3F22AF773DCCAFE489EC4CF5
-:10021000066D2E795B8761F9DF2D9E549C6F8DD51D
-:10022000734F3C7CBFD0DBF36522D467EB60322395
-:100230007E78BE25383FA8F7591F779603F2E3ACC6
-:100240008E21F9E98C1D34B0CA661B948DEB41F305
-:1002500067467BE6A4815DF5B3943118FF58475497
-:100260001E1B8479972D19D67F335F3EBBD9555D10
-:100270008CEB2C546D2C1EE07FCCA1FA2D3066D176
-:10028000686F4F5C17FC45FAE2199BE852D9C3002E
-:10029000EFDF2E812F50EFB7F9AABF11EA4DDC3006
-:1002A000FE0CB62F1E3D795934AC7FFC77AD43026E
-:1002B0009016F5329D68CDE1637C0FFFFB866D1CC7
-:1002C0001703E9AD49BB8D0CE67F6B5F6D79712E2D
-:1002D000E4ADC1FC44660C96C3B807100EB18CD5D2
-:1002E000FF257FD4E190768C35A96E58F7AD8EC886
-:1002F000F82F0640B63FEBFF3DCE5B2D8DF6D8BA0A
-:1003000087EFB70DCE51874D304FC55582F861400C
-:100310006F6EA0A33223733577D1EEE94C45D00F31
-:10032000603781B1DBC55C3B8A2F9B2FC17A57397F
-:100330003CA5D8CFC2099FCFC4F53123FBDD608037
-:10034000DBBCDF03DCA0FC4403403E9BB1530D56F5
-:10035000E6B230F645839DF2A71B92283DDBE0A074
-:10036000F47C430E955F6C7052FED70EF72CECB701
-:100370006CD557464F2E632BC3241EF93C16093A01
-:100380005ED97BD89F9D30DECA774D94AF6C6E1AD4
-:100390001F01E9A2DE279646C0F7452F284EFC5ED6
-:1003A000DDE232DB603EB30E7B5620F9CC79B775C7
-:1003B00022808FD55E519807B690A5AF7B11D2D918
-:1003C000D03F9D4A40F87DD9309CE673A6C145F3E5
-:1003D00071B5B41D8983F6E71A8A287FD4E1BE1F60
-:1003E000E7E7625F99B1FE841D6DC614282F74295A
-:1003F0002E06E38E7231BF1FF0B7C1E4F120DD6C31
-:1004000048B63A1B213F7AE0A467EE8571DFE9E345
-:1004100069C4F677C49617C6C1F789C3BD46AC3721
-:10042000F53BC6302FE9FB87F7358747ADC0CB8555
-:10043000371582D385BD036EBF01FA7BF3A8CA547A
-:100440009857C71503CDABE3A3703F5382F516BE93
-:10045000A2125D2F1C68F6B334CC0F4864B9B84EB5
-:10046000E80CD69FA338583DD0DFB99D3F4D423CA4
-:10047000C8F1CFC536FFF513E8AFFD338373338D75
-:10048000DCFCC55390DFD72BC9F930E42E9AD83461
-:10049000DAA7AC2E6212D0D73C33F3F0BC6700E68B
-:1004A000CF85B37BDC901FB62B650CEE231CCF9160
-:1004B0001DE46B59BB9E487FC0111C6F7BF3AC4F92
-:1004C0009E82FC05BFC1678A8694355F7C0DC6F3AA
-:1004D0006DB139B7329CA7311CE7F98889CFCBB70A
-:1004E00035DCB9D581FDF9890F40B919CB6B5E7E3A
-:1004F000B227AEE37580C170C8BFBE3682F8DDEBAF
-:1005000026E7F17A6CF70CEFEF57BFB8FFC47E4CCB
-:10051000D7D416DC0F69C0114BF0AEF8E5DCFED87D
-:100520007E400AA007F8E34BFB9440581E6303D7B4
-:100530001D589A0CE30DDAD866E80969FE16A51174
-:10054000D301BD8B8EAAD0FF118783E63178479AFD
-:100550009A82DBB5A7FF939B3208700AE2AFBFC057
-:100560005FEEBAAFC6F4847467CFE6853150DE5FC4
-:10057000693EBB240DE9FCC3020FC1AF89FA79A51E
-:1005800065F21FEF62B80E5FB215E7ED353BB7A617
-:10059000F1E59A207F614FC6A687618D7B0DBE4D28
-:1005A00088775F99D5B915F1EEF63D89F8AE85FAF1
-:1005B0003EC8D7E6FBA2AE87F2DACFFA3A81A2585C
-:1005C000EF676F2E4278CCDBF3F8F89E50EFC2480D
-:1005D000E604126095AF5C1E8FED586FC690255CE7
-:1005E000D8D3983003DA3D923B6628D2975B6DA64C
-:1005F00071D87C3ECE13B01DAD0032D60AC0491072
-:10060000A40AF51E81CFF83DB625E6400A0BE26745
-:100610007ECB923423B41FE2B13A55DC3769BEE495
-:100620003A58EF7B5865049D7FA7717F269B45BF95
-:10063000F6C9A9EE1F71FE99C57926FB7BC2CC7C59
-:1006400061D04F6FF8AE40BA11FB85F2ADC057EAEA
-:10065000217D46CC1FC6BD82FB14DABB900FA7C01C
-:10066000219D0FF34C79C242E7C0B58E7FC9645B10
-:10067000A500DDCE0FE77C6C8C387FA7C535BED1D9
-:100680000AEB7D35DC634C83716689739F199D0E7F
-:10069000E4EFFE709729AD079EA3EDA9B806385781
-:1006A000C3303F4FF5F449C8A073353B1AF9BEF586
-:1006B000DACED577C35DD1D8FE5AEBEBF9EDA26F58
-:1006C0000C2C1FE860D1E316E2178DC897615D8D91
-:1006D00091C3ACC837D86143CD1138676FE42D3B67
-:1006E000FB5B1459407CA591B12EE1F526EC7F0F00
-:1006F000F09B009C131EE003A3AEB4AB9CDE8F1DE9
-:100700008A1E827C96B922817E6EBA62609E907348
-:1007100050DF0FE02B0FE1389A45304FC8B9EA623D
-:100720003166DCB7CC16FB5F5BB798FF4881BF91A1
-:100730001D1F45301BC203BEDBBA5FD71B625DFFC6
-:1007400082EB82745DA6DB85F0BFF16BBB11D777BE
-:10075000A3B12415E51A98F778FC3EEA6B8376DEA0
-:10076000DF856BF2D73AFFFB14E633E07EFCCAEC80
-:10077000C7FDD882C723C0B1656EAE1FF7FD5E33DB
-:10078000CFFBA2A01CF0D812C97CC8475A4A12FC61
-:10079000BE34E487508E7CA307E3E561A2FDF40438
-:1007A0006ADFD30220457E7057B8E8BFEE9D8158BE
-:1007B000BE2485F848A3C9BF2A1DFBFFB94A7CF8AF
-:1007C00023C1B7D7C504EE52A1DF755F25301CE702
-:1007D000231648998FE3548613DFBDC160B8A7C4C0
-:1007E00086F55CC9B100EFBDFF50E99C58970F79C1
-:1007F0001BF1ED69CDF07D5D892B391CFB2949305A
-:10080000D07C545647DFD378BB4F4CBCDE0C81AF55
-:100810008F057E605FD3BEF74C8C3022DDAE492B56
-:10082000F3A5911CE44A5660BE4F556432E49B33F5
-:10083000AA6E49237A697A82F8D7348103D91F36A0
-:10084000B00E43B999FF4D9FB5350CF17947655806
-:100850001B9CACECA3CAA5910E687F87470D5880FE
-:100860009FB22985AE4EB92E1DC775D1B8B5CDFD45
-:10087000324E85D0739905F804F4FF52986725ED40
-:10088000D3FDF954BE1F849AEF613F9DA8C8DC8553
-:10089000FB8A55C4111D3063A01CF1F066BB95E4C2
-:1008A000D4EEE8A111E13F48D029E26531C73BC849
-:1008B0006B946F9CD6DF8FED9F3371BAF1ED0E23F1
-:1008C000BC164DB2129E3BA6856FB240F93D826FB9
-:1008D000354E0B772950AFF1158BDF807C40E1F46A
-:1008E000E07B2392FAAD31F37CCDCB99444F7BCDA5
-:1008F000FE17B661F99B61440F35517CDC9AD752E3
-:1009000004BDB9D296E3B86F58880E6AC21DD1549F
-:10091000FEAF7144272EAB673BC203E8AE0EE588FD
-:100920001A73202B06E07B5CD0D5716883F8F3D571
-:1009300045D2BC69CB43DED3D87B33E2D363E6E553
-:10094000EC672A951FB7F3F18FAFE6E3973E5AFDA8
-:100950002E03BC1D778F4F9E05F3385E174172E35F
-:100960005FEAD580390AF59EF6F55950EFE2E29339
-:10097000C336C0FC5B977E9A8AF451BAB4B618DBD2
-:1009800095562D9E88E76677FBB2B406367FC83E43
-:100990007E3FCD15C0F55C48F31C423A989FDB3A88
-:1009A0001BE5E78BE663CFA2FE1115E73982DF2F47
-:1009B000BDFAE5362E57B767E17930CFC8E9439ED7
-:1009C000ABF305FDDD97EE7997CE89F0C04C3C3F47
-:1009D00022728F717EB7F8DAF8FCD996AD7B1518C4
-:1009E000A73ABC651EA5AA3F0FFB39A704A2940C29
-:1009F000829F07F7D3797B200AE1EE317079AE7AD6
-:100A0000BB765DF867847955E33FA05D75B3EA0A6C
-:100A1000435C33BF19E75FCDCCC1FA69413C413F2C
-:100A2000842766FBCBCC0700FE552FF42B40FDA19D
-:100A30003A66FF2F6EA07AD04EEE13F5EABC5CCF7B
-:100A4000D5F3E1EB3B2FE8FFBCA4FF6982FEC5F8BC
-:100A5000175F4DA4F1CF95F8B310FE171551EF05B0
-:100A60000BAF07D460C479FE9AD3D37A93CF80FCBE
-:100A7000C7F77346F45C1DD73C0CE122F910CCC1DA
-:100A80006780FAE776A5507DC9B7989B316C57BD52
-:100A90002B793397CF843E8B1385FA552FF1FE3196
-:100AA0008FFBF0EC8B29623C2E4FEBF1A75F6F447C
-:100AB000BA81E4A9F5927F47CA7DEE4C2A01F86716
-:100AC0006F306BEA5F8C34DFE3827EFBF9B5DF6564
-:100AD000FF89E95CFFEBA3C35B4FB5FD8005F7D34E
-:100AE000F38CF6AB7E5EA9A2DD8B2F76E249E5782A
-:100AF000033150D28783CBE12684F3C79DF8B83702
-:100B000005F86A35C2203D089FBDF99E14E4FF1721
-:100B1000318FE7420CE473510EE2F0967909673D9C
-:100B20009D2DFD78764A2BB4BF45C007109A88F4F6
-:100B3000D829BF98401FC9457DB472F0A94CD45341
-:100B4000EBFAC151D0B99ED91BF2ADB89FE66CCC7F
-:100B5000B79685E0A171FBE0A30E80F3F9ED46277F
-:100B6000B2E546A3FF17284F376E579B7D8CCAAD61
-:100B700008DFF3B683BFC77AB337C614A0BC2CDB3B
-:100B8000CFD9705FBF8A10B80FD8AEC5C3C0666D2D
-:100B90007ED07E6D7E32F286A13FBE5D7E409B1F81
-:100BA0007C549B67ED802DC0836AE578DA37DC7969
-:100BB000D40178EAE3579DF8A98F6DD2E409285F44
-:100BC0006C549D9950DE67B1FBB681903FBD719624
-:100BD00013D15CA9FAE63D0038ACFC74FC513C0F23
-:100BE000CFB1E60F27001E66B7AC351B1DB86E2DC2
-:100BF000DDEE35087A7D51213A98EBD7965FBDAF8F
-:100C000097083CB29C507AD2E31DC6BDD30513AA07
-:100C1000A95F34F8141C9995C540E800B311CD6B59
-:100C2000CD28B7FDF0383E2E0FDA5C0E848777387A
-:100C30002FBBBE7E2C3B3918FEB1FAFDF1386FEFA9
-:100C4000230AC90DDEDF641FC673A06DF7F45B29AC
-:100C5000BDB388D62FED79735A944024E4EDC31DBB
-:100C6000FB5BA1DD2CBFE2C479972DB304F919FC1D
-:100C7000AF62B56E1EEB42CA61FE73F61FF89B02AF
-:100C8000FD576ED4B69B0B7C16F957D596EF2DA168
-:100C9000DFA5DE787DCB2615D73D4BCEDF378AE149
-:100CA000BAAEE75559BC906F4E6106CE8D5B7BB8EE
-:100CB000D7A763BB75BC1DB04B2FAEB7D66676E029
-:100CC0007A6BAD2C1001F3381A6976D9E1FBE50D8A
-:100CD0009164479B6D0179B28052165680ED9CD18C
-:100CE000D8EE8BF7B83DAD368EE3BBF63985F4A868
-:100CF0005A347E62FE799E9FCB02B40EA41357E84D
-:100D0000FAFCDA3C6BE2FA578D317000E151C55ABA
-:100D1000B9FE04787449F801BC6A609D1FC5A2BC85
-:100D2000A56BCF9C1E1C77BE8DCB4FF3F77F6F0951
-:100D30002D977AA0D4533786733DF1B92C77388E2E
-:100D4000B35C713D6985792E17F2B56F6D18D1EFDF
-:100D50008C4DFCBC0139360BE1B26E6DB213E58CE3
-:100D600019209787E1BE991B4EF540DE25BB4C3B11
-:100D7000C8D59BD3B07E7300CF8D758FA7911C0D06
-:100D8000F22FC1A57D4D987FB38272309763D6ADA7
-:100D9000CD2639FC75794EADE1725717723195B396
-:100DA000442EC77F824B099183CFF4F07C901EB212
-:100DB000AE8AA5AE643C772A26990D68AF6295711C
-:100DC000D7243F6C1572643BAC1FD7714A711F3139
-:100DD00084C8A39FE37900E30C1BE3DA26EA39B168
-:100DE0005E85A1E4E19B70BCF506078ED7096F977D
-:100DF0002B0BE7716A6D5801D2D9B031DC5E743CBF
-:100E00009FF3F78821CCE587F4A238672E225F0F85
-:100E10004993C281FEA09F5385DC5E1D39C44D7687
-:100E20003A38AB89CFEBD7F177D14F85D9FDAF37C2
-:100E300076311F091F368ECB0BA716289BF9BC00F5
-:100E4000BF901FF6CB30B2EF9D12E78F8433D0CD29
-:100E500050B2D30B7EB556D0CB5A13A703DF5CAE8E
-:100E60003F05E985113DAC137AD60C815FB686CB80
-:100E7000B5402F1CCE6B9205BDC0DC911E0A1D5CD7
-:100E8000CEBE467D09F01E9BD1E36ABD49E29B19A7
-:100E9000FD43D1BED21DBE6BF7EDDCEB83F3B3EAAD
-:100EA000D78F4731A877C6D894E084F6355B97474B
-:100EB000B9203D6DF445D961FC337EB5C8DF05BC72
-:100EC0006FCF907665974D01FE330FFFE94079E7CC
-:100ED0009189B8BEBF6E35D99125CCDF6E21FD69F1
-:100EE000DE9EB9246743BE8DE7577EA5627EBFD6DE
-:100EF0007E5EF5ABC7131C046F5F8A2109D3400ADD
-:100F00008374DE1693338076E90F54270C037273D3
-:100F1000FB0A9C9FBE3DCEE30AE07B7EB3EA3547E9
-:100F20005F5D3E5FF097F97B1EF90AED7AF375F687
-:100F3000FA4AE1B7D0DBEB6FCA888CFF020DD3D73A
-:100F4000B1EB500E02B83803B86F613E994426DC0D
-:100F5000DEDBF8C213796D282F6C79274AC90DDAC8
-:100F6000EBA53FA3A3B9FCB9D71CDDEFC78BC26EBD
-:100F70001BC417E75B8EFD0AF20050D0795A630A52
-:100F800044DD00F0A8D964223E53B3F3F96D4F213C
-:100F90009D7D6CA1F3BC7AE75B1F5E8FF2EE6E5312
-:100FA0007C315F864D4908E269BE83DBC9245EAAB5
-:100FB0007EF396D931907F5F1C1BC44FF5EE03661C
-:100FC00036F06A388E6D3E606EB57581A7E6B6F173
-:100FD00064277AE15B33EE83336F2A2C31EDEAF636
-:100FE000959BDE8A42790CE184E792C45727FE7410
-:100FF000F5A1FF89AF0DA17A76D42BBAC39F03CF99
-:101000000ED4CBF745B21818BFF2138BBF18F1BA44
-:101010006B5114AEE34B631DA7F3679627A05C5793
-:1010200069F225D829E5DF2B9FBD8FE86F8E529797
-:1010300060CF25FA4E3690CCE04BC6F5CDDA780776
-:10104000AD6F36F310FD553EA3BAFD907E63644547
-:10105000BBBBD8276F6770BEF9E566402AACEF4B83
-:10106000B4DB20DFF8832AF4DC05747EDF27D6CAE0
-:10107000D842CA7F23E4B68D1952DE056922445F47
-:101080009CBF65E531C4CFD9DEAE449C27C0C127E3
-:10109000E0A57C0FFDAAEF172672FC3087719868D7
-:1010A00007E7E858FC8EF58F995C68F70E6927F41E
-:1010B000393EFEBD627C987738EAAB5F2670B95D39
-:1010C000BFBE6F3BF9003BC642E9ABBB7DBFE5212C
-:1010D000A2ABAF3FE07C659EBFA488CA8F9902890E
-:1010E00058EE3F304521BE606181AEF6F51693D8CB
-:1010F000D7DA7298A7510985EF9B5C0E9D0D725748
-:1011000020641F07E9C61CFC4EEBFEA558472BF9CF
-:10111000D3A41F6E8EE007FA75EBF9C3211D7F90F3
-:10112000EDD9C6AEFD4041BEE0A3716BE03C413954
-:10113000A3E6630B9D1B353B4D6E84CFB91D873EE7
-:101140009C817A68B3DCC75A7EABDFC7952F0FED61
-:10115000721F9F5B9DDFF53E86EF5DEEE3D50AF1E2
-:10116000B7FF2EBF85938EEC06DDEDD739DDF0DBC2
-:101170000B3A787EC372A36FC042BBB70FE147073B
-:1011800057094F3DFF5C9EE120F8EAF927FC7DC03E
-:1011900042E028E127E993310F8DD349C7924E25CC
-:1011A0001D77D2A97EBD5A38EACB77237F82F9B862
-:1011B0005F3571FB598B42F236B43B923284F6A90B
-:1011C0008B8E3FD67424253E34EFD7E59B75F55DB5
-:1011D000BABC5B57DFA3CBD769EAD7EC3F64E6FA2A
-:1011E000414053CF527F1BE91957CB117EEEF7D9FF
-:1011F000F395D98774D1ABDD8C7CD1B494F92251AD
-:10120000DE7D432579F792A33D0AE592E5615C6EA8
-:10121000BB6417F9189E6FEF615E817C517E6F0F82
-:10122000E376924BEEF6A898103DBDAD458D427B1E
-:101230006CAB9F1575654721CB28C0B5957557CE0A
-:10124000E5B742D5965A8FF6D026D50964C22A96BC
-:101250004C8DA2B887968CDBA7C1F7596FAB143EB3
-:1012600070299CDB1598CF65C4B883728E42769A3C
-:10127000F9D68F847595B7F0F8838AD55AFCCEB627
-:101280004D890E3890EF68E304E6A05E9781FA9EE0
-:10129000F67B155B4DF456A5DB171E61A7D5EF0B4A
-:1012A000775F112F90CFF2853D86FC1C0B05BF2E7A
-:1012B00054736F9F06F0BF74546516C877B4A86C5A
-:1012C00005AE778742FE1E7408E07E9B07FB12E79F
-:1012D00023E1731EF74D76F772C9F9573E1BF600EE
-:1012E000D2C9DE4FF39E86F4FCDE8FB35EC7FCBE30
-:1012F0003FA77ECAAEAE3FF6CDBFCD443E7CE94DA2
-:101300000B43FABEF4E66F53D12E78E9350BE9CBE7
-:1013100097965AB8BDF9CD483FFA232FF5E6726E7D
-:10132000E31BDFE6B5D2B9BB8CF0F5405F33979B8A
-:101330005AFEFD38DAAB3B5A6055284FBC1941FBC9
-:1013400067FE6B61E40FBFF4C6B7C342E326FEBB82
-:10135000EB91FEEE4B916CDACB48B742AE9FFFFAB1
-:1013600088E7D19F5BBBE780B91CCAC7FECB7FE48F
-:1013700021FFBCF43297932E9A5A9F455BE38A2D46
-:10138000CE5F9A92D13E079DF564ACCFD6BA49B8EC
-:101390004FAE860B87C3258003AE0BE052897CBF1E
-:1013A0003B783C83F0E8F1CF088FAF66727E761D04
-:1013B00043FF6F102E0AF723B444FAAD0AAD9F7FA6
-:1013C0007FF3DB3CE4373FB4DED7FF69F1FFBFB307
-:1013D000DE8FFF69F1CBE9DDDBD741F3D4D3FDD557
-:1013E00074BDEF2794DF15E9A4F95EE37EFFDBFF10
-:1013F00067F84ECCFCBF8AEFB705BE23EDE857BCBB
-:10140000F4C67FA4B21FB1EE61FF47D72DE5F531D9
-:10141000AAF3683ED47F87357FE04C23E9A34BB91C
-:10142000A33C5391FA1BE94763193FA7C75AAB493D
-:10143000DE1CDB6B0DC9C58DAC80FC10BE5E2AF9CD
-:101440006328F802E0F0DBA47C3FF9938C815E8B8B
-:10145000203F26A596E2B3F47AE3D8F00945288F19
-:101460001E5A02F3827E0E451AECE82B1ED74B0D56
-:1014700058F2286DC3F448EA6D47516E1967D3EAF4
-:101480004FB7E9F4A15B1CDAF222F6723CFACF8A7C
-:10149000724DCC0FF3198FF543F4C6D199765AE704
-:1014A0002DAC6999DDF6E3E1F49880D3D570F8CFDF
-:1014B000E176159C849E6C14F5F57033DA1E3E8639
-:1014C000ED8C0CF45EBE5ED297A5DEFB43F0644269
-:1014D0009F368AA1257C8DBDB89F34A45F828B8402
-:1014E000FB8F85B7C4931EEE12BE126E7A3CCC46BB
-:1014F00063548F20FC7B19F38DB8EF6E1472FC38A7
-:10150000630CCFF73AA6BA693FFA399D7FED34A252
-:101510007C32DA1643F19ACCD13B06E54C1431BF4C
-:101520004F61AC6C78CC3005D69B62643E0BE89B77
-:10153000E843233BEA4346FFD2341C87DB6B7B1B2B
-:10154000B95D1A76B72FBC80EABBCC90F73E3687E0
-:10155000B9A0BE378539155E9F45C752381A533139
-:101560002E0B526CE78DE6FD7A13997F29C727E190
-:10157000A52FA6E9D4AFCB10CBDB4715507B9F81BD
-:10158000B7771921ED93C1EDEBEDCB2DA47F785703
-:10159000F6CE42FE513C466B378EC8E2766699FE27
-:1015A00024CB41A96A7026A15C5CB6AC1FE9436AF2
-:1015B000B8BBF615B4F7EF8A207AF4AEB87BC25008
-:1015C0009CDFAE38274EEFECC4DDC378FDE9F7FDB4
-:1015D00009BE7BB687D1F7A7B23C473201AE67158B
-:1015E000C7CC57E043D91D87CC493084A7B9E40262
-:1015F000DAFF26FA76FF1EFD8C13A7A8547F22E39C
-:10160000718F6C5904F9A327F8BE3226417F13402D
-:10161000D9C0F2B6307BEA0298BF57D87BFF20F6DC
-:101620008B1ACE3C2F23BF5AD13B2B1DBE4F605D82
-:10163000C701DBB3B89D461DA36C44FF509FB1DCCE
-:101640001E2FEB633FD86F8280C76799DCEE24F3CF
-:101650000057AA5FB1CAD296817ACF2A53201BE3E2
-:10166000A773C6B4E13A8BD3D9F80D08F7FB55B68A
-:1016700099E6DBEE253B77648E03F1E00192A6F854
-:10168000C2A63407DABDDA463707D03FD0F6649AEF
-:10169000B3D14158A6781CA967B58D0EF445BB7C23
-:1016A0007B3EF7331CB7B746A27E586EB3527C8E92
-:1016B0008CEB9965E7FBBC4F63EB9AEB50EF7C5CDE
-:1016C000756E86FCACC7B9DFE5739BD5AFA0BEB61F
-:1016D0008EEF53B65A1BC7C3EC4EB2F794378D3614
-:1016E000A37E59617399719DC9D99EEF715DEC3BE1
-:1016F00080DF308CE364B419BC4D5E8A3351A36043
-:10170000DFE13E313AA250EFD5C701CD17713F322C
-:10171000FF5298C79A05702C8B76EC427A39519F0C
-:101720004176CF9B91EE107E18C788FE09636B321D
-:10173000CEE7D54C4E8FC5B1F62C1BD1731843386C
-:10174000B4990093906F5B1E66403F5BF1524ED799
-:10175000B0CFAC4668FF909185A3DFE043D1BE7463
-:1017600089D1BD09F2BDACCC18198B74954F74FDAD
-:10177000688EE7335CDFE99FB3E1480FE5ABD792B2
-:101780007F45D205331E1B1707E39CDE9A56807CEB
-:1017900053D2D1A33963FA6485D2C31485E800D249
-:1017A0000319440F93FA6279F19840DF85B9A88F45
-:1017B000D630179EEF49CC897242076B27FF6387AB
-:1017C000CDEC403B97E427926F005E5DD684201DF0
-:1017D0006C83F3DE68626C7B8395D2171BECCC08BC
-:1017E0003C6E474312E5773538286D6EC8A1EF2F60
-:1017F000373829BFA76138E5F736B828BFBFA188B9
-:10180000D2D71ADCF45DF225800BF121C957243FB1
-:101810002AB799DBD01F29F9929E6E660278471588
-:10182000507BE27B92DFE13A0C05417E24F19BAED6
-:10183000B87D4969C8C75AA723FE0BD5F33BF7A16A
-:101840005E5E6973929ECE38DFEB007A45B8A49A4B
-:10185000D97EB4BB362E70B5AD4C0BC2FFAE4A85F7
-:101860001943E8EAEEBA30660C3937EEA98FD1E4B5
-:101870004BEBFFF85622F43F2EDE332D0BE671FCC6
-:10188000C12F9EF9337C7FEEC1B399886F98C7D67C
-:101890002770DCC5E19DF388C5FC3213F9A3FA4833
-:1018A0003B08FC215ECA18DF6FCF3DF877DADF6DA9
-:1018B000F51607CAC39F209E00AE7F11782AABB7EA
-:1018C00010FCBCCB4FEEDC87FB7CB199F85CD932C5
-:1018D000B10F57013C43FCBB279219D923409AA66C
-:1018E00078F5133F370722A0FF130ADFBF0A080568
-:1018F000A518F7B7EAB71FE1FE57EA8F92FFDC633E
-:10190000B505480EF099CE87F6A7D41FA17AACB5DD
-:10191000570CDA11E91C43BE3FC46576C0BA91A6E4
-:10192000116F6539075932FA4D9A143B6E990AF1D5
-:10193000BD629542FE498CBB9902729F2F4B253C9C
-:10194000B6641A695FF5CC6242AE6BA2F349D26B02
-:10195000C56A6887FBA229DF3C3B840F9789EFE5C6
-:1019600039064AE5F726EC17FB5B953F0DE5899EA6
-:10197000589E8B69C134846F4FDB78A31282FF8736
-:10198000B3F8F82D997CFC9EB8D9E0FF1ECE4937FC
-:10199000CFCA45FCF0F34B8E539653B002E338CBDD
-:1019A000568F46EECB1A4DCEA478A8F718F643EB27
-:1019B000B17379C1CAE3956BBA393FA4FDEC34FE2B
-:1019C0007304AD9BECBA55BB5EDA8571FC559F5A2A
-:1019D00008BF558344FC54AE7FD86432346AEDD5D9
-:1019E000E35EFA2C8AFC0F7B785C25A4DC9EBAB8F7
-:1019F00092DB5F9DB0AFBAF0FF1CDEF569549776BD
-:101A0000EA3DEA35D9A9E72BDF45A1FC20D753F8F9
-:101A1000C63709340FE50AF97FE6BFB13CA1AB7BBD
-:101A2000377A7B75A73D5BD8EDF4E57A7BDD912CA9
-:101A30009D5FC0C8E81E97B4D73135371AEDFBDF7C
-:101A4000887B1EDDE935D2BE3D7F03741207FBD3D0
-:101A5000E888467FD5A56EE4E9A86C2E1F5C10F6D9
-:101A6000F04B3B54D2732EED88A4FD346FC763470F
-:101A7000D07F386F8B42D3A865C7086E004F660DC4
-:101A80003DC730DE2CEEEA7977F833A3F11CA97E4E
-:101A900029B20EE96C6EB3E2DA0AF3E9B03AA27B3E
-:101AA00084CCE7ACA0D76A4BF33082B3987FAB907D
-:101AB000B764BDB92D8F91FD18EA5D2439E8D711BF
-:101AC0008CDFFF68FF3DCEF3DCC6C14EF4FBCD6D6D
-:101AD000DE3D8FE4881D11761481CE8A3861D9CF1E
-:101AE0005F055DFF358BCB2FE7843FE8DC2E95F853
-:101AF00019CE13F7D759451B8FF79D68F75D1687E9
-:101B00009B1FF7778F60FDB9CD6D517DA1FE97FBCF
-:101B1000FF48A9399BAF6BAEED581E9EBF5FEE89A3
-:101B2000207FD6977B9E1EFF3A8C77A179743CEE7E
-:101B300007D97F7CB689E363A35A84F0627E1EF7DF
-:101B4000528BF01D1C3ACFB84DBEB4D07DC7E37E9A
-:101B5000CEEDF94D94213788CF5AABC79A9C8EFBB6
-:101B6000C7EB46BEF1B9C2E169DA33DA87F798E626
-:101B7000B7E433A467DA77C9547F9521A49ED9E4EA
-:101B800024A668DC5FE24A21388B7B48225E1EEF88
-:101B9000D5D1BDA2122BF927660E724CBD0BF9E40C
-:101BA0003B268E975E8E27507E9BF95E1CC54D2D81
-:101BB0004C734CC5F92F7A5FA578DF9983051F48D0
-:101BC0006A1D8A718B35AB14E68275B6A571B9A111
-:101BD000C6AF320FE47B023DF8001423B3D3053FB8
-:101BE0000D64E17DC0A72A0D2E339C7FC7CDCCA705
-:101BF000A2DDE8651ECF5C93CEE3869F42BA87B430
-:101C00002636901507FD9D17F8AC9914C8C238897F
-:101C10009A9793294EE2BC99FB2DF13BFA496B0A46
-:101C2000A03DD48B17F1B0D83E26847E6ACA9C0EA4
-:101C3000ACA7C63A1DF9369CAFFD22C9B1AF4432FC
-:101C400094630DFB22799CD3AFC2365B42F0E4CEA5
-:101C5000E67272BCC0239BC1E321D78B78ECF55BA5
-:101C600093FDA8BFC9FAEB4D9EE908075C07CAEFD0
-:101C700073CD4D5928DFCAF9CE8D6AA2799E17F42B
-:101C80003D37BC89C74B9B793C25D6C77C9B895186
-:101C90001C77FB0B168A27399B7C6C2F8E7FF68571
-:101CA0007E0CD7DF96E69FBD9FCA417E04BC55BD22
-:101CB0006809E07ACEBCC0EDCD674C5C1E3B539208
-:101CC000E440BC154DDA3093EC315B2C0AE2FD8C1C
-:101CD000C2CC4958BEB587D387ED1BEA294EBA0A54
-:101CE000D804DEC781B408EFD59CD9DA8FE2C3CE21
-:101CF000BCADE28D28FCBE0ABF7B58D3CC9F213CF3
-:101D0000B673FDE9EC8BFFDE2FF41E9A4CABB66880
-:101D1000E3E0249DC8F205D95C7F5920E07C5F3662
-:101D2000B737D44634AF4FA77572B8039E48EF0358
-:101D30000E13F9F4108C83C854906F3C0574F5347D
-:101D4000DA15B673FDEAEC0E13C58557ED8B7451A9
-:101D5000DCD9CAEB0C1407A17239BCCA00E0A35449
-:101D6000A17EAB26E5F81B49FE66A4C7B66F55C534
-:101D7000388CD970DDDB789C6F31CA8A543E90CAAA
-:101D8000CF88FC99BD0349AE83FE5D785FA9EA6701
-:101D90000F70384EAE7C97911DC34AFCB5A6D38F09
-:101DA00033321ACFBBDA953744E33D40F69ECA5032
-:101DB0003ED1C3E9B2D199887CF57036E75FD57B17
-:101DC0009F31233FA816F743AA5F54B83F19F6196D
-:101DD000DE93AC5E71C313449FBF37B14C58CFF94B
-:101DE000E6C7A242F1B14BF4D359DFECA4FAD550C7
-:101DF0001FFBA95EF14E14CD679B89E24CF478BCC1
-:101E0000E6F62FAAD7D4BE933E9AB91DE5AAF5B33C
-:101E1000633FF914FAFF7A4798D3475F9BE95ED98D
-:101E20003953F36C5CFFB99D61C48FCEC570FEF071
-:101E300025F04F5F36CEE3B647292EEB0F93E93EF0
-:101E4000DC1CBFB65F39EE6F906F63BC549C331AD5
-:101E5000E3FA6ADFE3FC0DF0723BB57FCF44EDF5AA
-:101E6000EBF8A568D7B93F7746103D9CEBC9F172F6
-:101E70006E57369D476D319CCE61BEA9787FEEDCF2
-:101E8000CEEC7CBA9786C20DD04395D06FCFC534C7
-:101E9000A7DA43CADB4C424F0B404DA41B6C0372C4
-:101EA0005F553D97ABAAADAB293E04E36A87155059
-:101EB0001AB0C45E1D1F0BF44AFA63780EDF5F0C84
-:101EC000C74B10F1DB24EF349B917F7B845C58B3CC
-:101ED000431F5FCBCBCF6477DA391DF1329E17E910
-:101EE000D0A7509C49F5B2057391CEABEBD6DE85F9
-:101EF000FB4CCEBFDAC88A500F6B53549A475B181D
-:101F0000BB67129E1BA1E384C86D5F07C761F6041F
-:101F10009257E91CBB92EDE074832726DE135DA681
-:101F2000ACA671D2A43ECBD725E104E030635C5F60
-:101F3000DB6851DECDBAE53CF5EB96F3B1E5707E9A
-:101F4000D496E6787424E2F9772ADDA7BDFCDDE0BB
-:101F5000E8D82EE4B2E0B96E0EC6B7C2FC9391F693
-:101F6000D0EE92CDE5F16A8C9F8579666DD4C67509
-:101F7000E76CD1E6FBEFD0E673F768F3792DDABCB6
-:101F8000F3B036AF887151CFC6FBBBA867638A7ABE
-:101F9000B6C3C2F56CCCA39E8D29EAD9F81DF56CA9
-:101FA000CCA39E8D79D4B3312FE18DFA36E651DF83
-:101FB000C6F25B73B83C5623E224110F48EFECD510
-:101FC00030CD7D9F4B6FF07B1C40077CDF4C37D3BF
-:101FD000BE790A6B90DEC1ED4A3D275B1D18EFBB51
-:101FE00038D633246728DEF738B62219F1666CA597
-:101FF000B8D3F9AFF1B8D39A82301BDA375A977F4A
-:10200000B902C339DDB19E1158FF92A97D1BC2B739
-:10201000B6FE10DD7B6F5DE278EF268E3FB2B3B087
-:10202000CA58929BBC78CEC5768F477DDC375BADB6
-:102030008DF3D6C77DEBE3BDF57420E5BDE74CED30
-:10204000C9C8D74FBE605D8DF33F1926EE9F4CB3D4
-:10205000EAFCFD424E5BA36CC6F37A464E2CF79F1A
-:102060001D05F9BC8B7356A6E55706931CDE995FD8
-:10207000AD18E85E5C52029D438BC49C5295F6B647
-:1020800095C8E7E61AE8DCBC0C72198E77F903955F
-:10209000E487EC0D06CD7AFAF9C335F435607BACF4
-:1020A000EE5E434F4DFD41FBD375F71AFA6BE3E843
-:1020B000A72C3980FAFDE4D58335F52ADC37E8E032
-:1020C00028E62DE4D70A383F5CB0BEA7166F484516
-:1020D000FC2E9ADBD1B612E5D357C2E85E5825FE36
-:1020E0003FE08B95D027DE67ACDC23EE03D76BCFC8
-:1020F000E172710E551A99CF1E1BA4C34A3B73C5DA
-:1021000040FBB9FD8FE50550AF78FB8FC3ECE9A824
-:10211000578C4E447E946A72511C6CCDEECC98253F
-:10212000D0EFA20CCF4339B0CF4E351DFA45299ED2
-:1021300087BBB9BE7772F56FA2284E4CD05BAAC997
-:102140001E8E78DFD4C4E3E3D03EA6C606E9625310
-:10215000535C785F5B70BD413AF88EF004F8E1762D
-:102160009CCA83E4F7E86816EB1DADF8509E96EB29
-:102170005B28CE15D697F773AFC89F12FA855CE738
-:10218000F97E07F21C78FFA2617FAA8AFCDCB063AB
-:102190005B32A4B916CF165C4FE5A6CC3F8F847195
-:1021A000AAFEC4D7F3F9BAB1512350FEDC69721606
-:1021B000437E65D3F366D4B3AB8C7E33C557BEB0D4
-:1021C000C98CF1C5376FDF44DF676FF7523CE51C00
-:1021D0005647FAE769F9EE808047E51865A31DE6E2
-:1021E0001DD68FF38FCA70EEBF03F9E82D7CF7E39D
-:1021F000F276251FE378A6B8779BBDF0FD0DC18F61
-:10220000F5FBA4E3DDC9853D081EFCBEC69F18682A
-:10221000F11957EF8BC957D2685F4CB93280F4B2CD
-:102220003B02FDB8FE9BABD37FDFE5EF2E74B4F02D
-:102230007D50690EC44FC67DF2A689E4DC5A386F22
-:102240008617A05ECDD8F590BA47AA1A7A9D3F2E80
-:102250004243CFD358C83E81FEEEC4A09190FC9477
-:10226000E20C4DFDA95306E8E8BF20584E7CE47A05
-:10227000CDFDBADAC53E874272E618ED77C6E304B3
-:1022800081436BDAD7B249C17A48DF5BB81C5CBBCB
-:10229000276633DAFB2A0D5C7F9AE6E1DFE7EDE79C
-:1022A000DFD934A6D9877D329C7FE6E7A289FC027C
-:1022B000D29E3E0DFFDD05FC4112E9BC1F8EF7E208
-:1022C000D11EA1B93F2DFC81386FC443ADB01BD5E1
-:1022D000E670BB51ADEF9819DF1D00F81BE362A952
-:1022E0009E350EE3239B14B22B62BA98E225B5719A
-:1022F00058D81FC631CE3BAA7A719FE8CB81EE78C1
-:102300001CFF6B3CAE74CE067D1CE46AF247CE43E4
-:102310007B5008DE6EE9E710FE38FF8A9E08BF6238
-:10232000259FEE45EE3860C638BB295362F271DF57
-:10233000E8E94BF275D8CFA47F77BC7B88E8ABA3E4
-:10234000D248F4FB437098E7E276543DDDCD66C792
-:10235000CC784F7CF61EC589FA28D64378F4447AA7
-:10236000D4C1232EF66A3848F874C26B8F3ECE8DE6
-:10237000C369CE7EC51FE8024EFA79770737B99E4A
-:10238000D91ECF78E40B725D7370FED83FCC1FFB73
-:10239000977E08365CBF3F33C83E35CFCDE363F54B
-:1023A000F430E90AB7BBDC79C548E99462ED7EC434
-:1023B00076B82FEEB89240E53F965EE6C13CF9FD57
-:1023C000A76BA313B90EC97783FB81DF1BF8A17735
-:1023D00081F476C73BFA09BBE3503654138F2CF8CF
-:1023E000AABEBD3E1E59CA01FAF3C51B69A0B8C9F1
-:1023F0000E5B3AC91792CF7AC4F9E159FE0DD5F3B5
-:10240000403D3E9B04CD79E311F6BF8591E9F41E72
-:1024100043EA92B804C49337CC4EF1F7DE252AC5BF
-:102420003D7BA19E23443E59B12C2315CF8B130F26
-:10243000653FEB03B9FDC4FDF109C3619C93CB4D2E
-:10244000F15647B0DE89E585A918A77172AD659A86
-:10245000BF0B7835F4E3E743ED831FD17976C1F004
-:102460006ED434685FB3FC95280CF3AF5ECECFF129
-:10247000C40CCF83FDC87FBB699B1DE167DF9487D8
-:1024800076DF35701C607B293F542D2F4C44F9A218
-:10249000E61F879EB5E33DEB25A604943FCF7C0065
-:1024A000E7A142E719C90DA7C3A00BF2A745921DEA
-:1024B000E1B4C25CE8573A6F38F0D795A817E63711
-:1024C000670520ADB578D6F443F97FF9F324B75406
-:1024D0003DBC244B55B1DFCCE8AEEC2632DD26CE38
-:1024E0006D94DF3145F91DE364507EC73CCAEF9817
-:1024F000A2FC8EDFE76FD0CA7FCF087FA1B427F799
-:10250000696CCF47FF9D6F0CCBA9A3F3D69683F2DE
-:10251000FA2225DC89FC6811CA4A98FF2C8CF458F1
-:10252000B625999FB702CFF556EE37FA56DCCFBDE8
-:10253000B11D64B210FABCE98A9585DE9B1DCD629F
-:1025400034F9B1D6644DFD427B9AA6FCE6A47E9A8E
-:10255000F25B1CF99AFC6D392334F52738476BF28E
-:10256000B70FBF4553BFC455A2C94F2E9AAEA97F1E
-:1025700087DBAB299F3A6DAEA67CBA6781267F5771
-:10258000E5FD9AFA77D72DD1947F6B008D14E8A5DD
-:1025900005F52E0BBE9F62A5F4A7AADD887C63D14A
-:1025A000EF326D88EF91630D755DD9F73F14741CA0
-:1025B00037C0F53ED24B6FF13E4E6FF1CECD293C88
-:1025C0007786A21F12A88AF4DD63C948BFFA7AFA97
-:1025D000F29111072F3B0087A35E34DF61043E3484
-:1025E000F2BA83833320FFD3176FE4F91B0EFE2664
-:1025F0001DF20D2F2EE5F941072F63B9F9A5313CE6
-:102600003F9991E8F148FF8E29184F32F2A6F4D590
-:102610004E6E27E9F29EB94C110E785F1BE180697E
-:1026200000E817D38340BF981E06FAAD00FE74047D
-:10263000E817D3A3A07FE2F77F05FD13D37741FF0F
-:10264000C4F4F7A077627A0CF44E4CFFD0308DD2F0
-:102650000F1A3CD4EEC3864A4A3F6AA8A3EF9F34C0
-:10266000D453FA97061F7D27473FB74333CDFD006C
-:10267000F433A23F71BFE97CA81F58FA2BA57FB2A3
-:10268000B18EB54620BF6835C67C610DFA1DBBB75B
-:102690000318D91721F258347345F42779A1979D6F
-:1026A000F8B7F8BEB38FC7DE1FE6F5A7B4C99983A4
-:1026B000553CB7EADE42B7EC9FC4FD7A7DBFA784E4
-:1026C000BCFC657F570F6C27FDEBD2BFDD193713BC
-:1026D000E27F3784C4EBD05F48DC8DF483CB389F36
-:1026E0001BADFC9EB1F473CB781ED95FE1D78CF89B
-:1026F000C3A85546925F228D2C80FDCBB89D51D644
-:10270000E67C8C63185563A37BB589F0DD5C40F5EE
-:102710005C2AA45BFE06F5F3827EF544317F28A790
-:10272000F9177EED213BEC28115780EDADBCDC871D
-:10273000ED47A16D6108A5C49F9EC17BBB05413FCC
-:102740003FD68FE0F503D85FDFBFC37851C17DD39B
-:102750003BB6391FF975EF7936BA17BA717480DE56
-:10276000B322A313C065B2D49FAC222FFD79DB1333
-:10277000C98E3456ECF50C87E766C4A7DB62FF2CE4
-:1027800082F659466FB44F9608F9F93FC15B31E2C2
-:102790004DC253E245E251E223247E8AF0D01D5E11
-:1027A000F5F8D4E351E2AFF0EB205E10AE57E32D25
-:1027B0008857B4E7FEB3E06D8891BF5F66A9B1D2D8
-:1027C000BB683F84C77BDAD9F868A872CAE139854B
-:1027D000E7BCF78AE308E6CBD9E8F1885A597EA12D
-:1027E0009B72CFD7EDA6E8107CDF28F01D9F06F581
-:1027F0007B5C5D5FD693EF31C8FE077753FF9D305A
-:102800001977E1B2E50F0BC63F2E2AE4F02F4A53A9
-:1028100009FE6373E7909CCC6C5CCE74C07FC89754
-:10282000C67FE7A6772DBF613BD073CBC6C76BE5EC
-:10283000D3229DDFFA562197DEAA934BF572A5BFEE
-:10284000BF902BD358DA8F7CAFF257FD89AF5EEB88
-:102850007B95FCBDD371629FA5083ACB70A86C2410
-:10286000D211F3D0397918DF3BCDC377417D94BFC6
-:1028700085F929BD8D05E87C9D008C18F3B733469A
-:10288000F7C80F454C2CC5BB7163078FED8BDF4339
-:10289000DE656BC17D3A4FF5FC9B3DE45DB683E39D
-:1028A0001C74BFF2A03583E42FDC87A6107BE0DB2D
-:1028B000703EF585F3E3109C5F98BE05E7575F58BF
-:1028C000EF6FE1FCC2FCAD394B18B61BEFD0C6ED83
-:1028D000C8F6B7D9C78262D23DFC6ECB7BB517C2B2
-:1028E000F79D98EC71683F7F27E6BA71B8DE776292
-:1028F000120D3CB598291DB8AF6F57F2A1DC07C186
-:10290000F1C6D3787AF84A78EAE128E1FB5F80E7FC
-:10291000175DC1F394909F3BAC7F8C4A4A47FF5DA3
-:102920009478C7F277792AE4CFE0D492315EF50645
-:102930009AE7A8FA11CC3898FC36B908D71A2B8731
-:1029400097DE6EC5B6241A42E377BF307BBEC5F171
-:10295000BFDCA8D2BDF10B2F87913DEAB49FDBDB32
-:102960008A14CF77488F35AA6335BE3FCADEE1EFC0
-:102970009CB1EF0EA54E8AFC1174BA85DFB7AFB1DA
-:102980008EEF128F529FFA0F878BF80813EF454A8C
-:10299000B9A29785BF4B20DF2FEC4ECE1816CEF98B
-:1029A000602F8B781741E015DA513E05FA19067C45
-:1029B0002EE5D170D22FEA7BB8E2070C0DDA113A7E
-:1029C0007A45F891DF8E0A0CA077B98A8EAA144F47
-:1029D0007C50C477DD3CA0CE960E78BA29D3933ACA
-:1029E00000D7A57EA7229F7917D61987F687A383DC
-:1029F0006DA43FFE483D346B80E017792C4F735F28
-:102A00004DD29D6AA3F89D8E0FF87DBC856FF3B8FB
-:102A1000CD853D548AFFD7C7C58D62598FA2BD7140
-:102A20006CBCC9E97704F98B7C07C89264608E108E
-:102A3000393BCC11CE1C21F389C889D5E4239D3DB7
-:102A400035F5A387A76BCA635CFD35E57145059A2B
-:102A50007C0FF7F59AFA89D3C668F2C99E5B35F503
-:102A6000532A2769F3B8EF00EEBDEB6668DAF5A9E3
-:102A70002FD3D44BF35569CA99CF752C2701F93858
-:102A8000FFCB58B55053FE7454118F1FB7CDA67BA2
-:102A90008A994D3FD3F427F19B12C7F1CB1CFC7CE4
-:102AA000F0C17FE4B710782E4CD29E1B63EDA30FCC
-:102AB000DB29D5DA35527E200E6ACE7F950E6A99D3
-:102AC000960EE2791C4FE1DB831D28C7E8F18FFEEB
-:102AD00088D075A23F22142EE88F08CDA33F22B4E0
-:102AE0003EFA2342CBD11F115A3EF8A816FF438F5E
-:102AF00069F17FDD4763FE533C8D68D5D2831E4F5D
-:102B0000379CD6D2C7284F38C1652CC86348EF120E
-:102B10004FD3E03F3AE7993B1AED06373117DD0B0B
-:102B2000F89FC2D7333A7C7DC3560FC5772E2F79D5
-:102B3000391FEFEE9C7FA28FEB79E41FEF0B3EAFC6
-:102B4000B703C87852DF188E4FDFF130E257DF1A33
-:102B50005A23F1FCF8A9DA4A76F964D6FE16BE3F8C
-:102B6000638AF7FC1AF95822460F40F95373EFCCE9
-:102B7000C7736EE6BF585251AE99D987BF27C87246
-:102B80005BE99D16399F99293CFE68DF00C1A79D2E
-:102B90003C0EE9B5015CBE8E74DA290EDA9BCB449B
-:102BA0009C274B9D3910E9F0DDB06CA4B375DCCEE9
-:102BB000D56A72505C8B0FE811FD94286FA33CDC42
-:102BC0005BC8A38D1F5BAD9CEE98E67CEFE7B76A10
-:102BD000E270076CB76BF2039B9334F507ED7768EF
-:102BE000CAF303399AF2C1479D9AFCD063C335F505
-:102BF000AFFBC8A5C98F682DD2D4BFE1B45B934F9A
-:102C000061ED4F223CBF1A90CEE3FB156107707057
-:102C1000BCCCFC6902DDA7917A848CCBF6083AD64D
-:102C2000EB237DCC1E8AF36E4C664EBA0F6215FA0A
-:102C300020D3EA291E11572DE579E6D3C655CB7866
-:102C4000EA4E7D46E82F529F0889A776E1FC653C55
-:102C50007527DEC5FB927AFAFC87C0BB7E1D7DCC52
-:102C6000FCFE57E3FD66BAC722E7A79FD7CD221E19
-:102C700070ABB5EBF7876CB9DC6EF068BADB980B1C
-:102C8000F59E85E389E079D578CE561FC0B7F1E788
-:102C900066E752C70F8F3773105F4F29BEAB9A4B51
-:102CA000EF74D2BD35396EAF5C4EDF863CA5CBF5F7
-:102CB000CD8CE6F15D2CDA4CF72EBA1F8FC335C9E7
-:102CC000CC96D13B49E21EC2DDAB9BD7606845A9DB
-:102CD000B9C9C4DFD5F79BD04E543C06E4C07CE0B4
-:102CE000135B77AEB381BCF66CBD91EC3E19B9F1C4
-:102CF000778204D979AFA40FE8694827C5887FE8AF
-:102D000077C3401EEF3C2E97AFAF50FDAEF33E8031
-:102D100045C3E7B9FED705DD113DCA75FC6FDD0F70
-:102D200090F4AB8793D4AF9938BFFA8A7949F87594
-:102D3000DA4F04FCE4FD0CC702937BB38DEE7914EB
-:102D4000615C99C4DF4B03395DFE04E13194D743E4
-:102D50007ED45DBD4235371AEDE01DCC116DFF010B
-:102D60007BF0FFD2BD09827F77F7BDBAE31357F13D
-:102D7000876EEE7F75479FF4F723EE8185F0091E7D
-:102D8000EF23F0E1EF6B20BFFACA48ED3EDE9ACBAD
-:102D9000E17BABD84F706EDBF2B57C82A15DBF7179
-:102DA000B92AF8C4ECCEDF9FC0EFB3969B48BE664D
-:102DB000CCBD1EE30C3E5F67A2B8D8512E46724CC4
-:102DC000D946C5BF49C173746412CEDFEBD39EC729
-:102DD0003731E70AF47F94AFD27E9F63E3BF53316C
-:102DE0004BFF6E8AD0D7E7FC80BEBE3E579CE34EB9
-:102DF000E624B94BF8FF2B451BBDDCD5E1E77E335C
-:102E0000D4B7556E77A2B83179BE3BD07F13F21E8E
-:102E100008C0333C07CFF165C62EE3F93AE1D94D3E
-:102E2000BCC2799B8857B0F1F88C8E3D61DCBF291C
-:102E3000FD4AA2FE79DF652AC7FAD8DB857C1E77BA
-:102E400021FD497A7F5587CD40FE968E3D91E49FC6
-:102E5000473F4E34D0C159C3EE84E169C1F9795A74
-:102E6000558D1F449F7A96BC42FA62628627908BEA
-:102E700071D846A7D509F9876C07E9FDA86261F703
-:102E8000D2CFB753EF1AC9DF77E9F07179B6A388CB
-:102E9000BFC3017C91E13E927108250CB45448BD3A
-:102EA0008111349F1FEBCF997C259FFB31AFDC4014
-:102EB000ED3DAB4650BECFB2350BF01ECC1D8D7331
-:102EC0004CE8C26E7D72716138346DEDED5F1A8E23
-:102ED000781BAD7469976F13E759AB2EBE5EA625BC
-:102EE000821FCD1B28F9B888435AA2D03E58A8307B
-:102EF0001997447C5CE62F37897C21CF2F5ACEF37B
-:102F0000ADE27DFD6DC28E82EBC614D78D7AFF0EC9
-:102F10006167C175638AEBC6EFC8B7308F7C0BF36E
-:102F2000C8B7308F7C0B53E45BF8BD8CB953F355B5
-:102F3000EE871A17BAEFAE58D9B890FD827EA8D0A6
-:102F40003CFAA142EBA31F2AB41CFD50A1E5E8877F
-:102F50000ACDA31F2AB43EFAA142F36CF82DC13C5E
-:102F6000F2395789263F19E4FC7121FB1BFD50A162
-:102F7000FDA31F4AD39F6781A6FD5DAC5ED31EFDF6
-:102F800050A1F5EFA957347EAA7BC43BA7E51BE20D
-:102F9000887E221DEED48180E77F8BF8C77DA674E2
-:102FA000C473CB5CAE97853B399E9B8A38DE0D8C13
-:102FB000E3B97D3AE179B199E70B797CB29E7ED095
-:102FC000DF33CEC4FD3D98A2BF0753F4F7608AFEFD
-:102FD0009E7199DCDF8329FA7BF03BFA7B30457FD9
-:102FE0000FA6E8EFC114FD3D98A2BF0753F4F760A8
-:102FF0003BF4F7608AFE1EFC8EFE1E4CD1DF83DFA1
-:103000008FA3DFC9149C17CAF17D35FA23D0A146DE
-:103010007FB46BF228C787D647393EB41CE5F8D099
-:103020007294E343F328C787D647393E343F33D7FA
-:1030300041FB0BE5F9D07628CF87E60736F9DE426B
-:10304000DBD9848D170F63DA1AA93CAB00CBB867C4
-:10305000E74B771A413E6B0D53526380739A94DDB0
-:10306000778E83BC47C4FFE5B17603E2DB23DE53F2
-:10307000F70418C55B0EFC5B32953F23EF87E11F19
-:10308000E03D7F0FA3DF2591FE62D9DEC9EC2AA6C1
-:10309000B27E30DF753DFDF8B21EF1CF9079E00DC4
-:1030A000608C57C95F6C2BC078CF6D0685E224B663
-:1030B0002DE571C27ABA7A6C20F78B6E33EC3E88BC
-:1030C000F740DABD0ADD07CE32B2A3A60284535D13
-:1030D000019EBF0F0C8C117EBEBAEBF1BE899CB76E
-:1030E000B46F029FA0FB7323DB8F8D8D867E3CBE69
-:1030F000D1F43B29C5662E37603BD42707F814D797
-:10310000E610FA5E3E90F34D8F8F8FFFABE726F20D
-:1031100076E1BCDDAF9E8B22384E5CA650BCD4C895
-:103120001DCC85F7737F21E63D604740C5F1BCCBE0
-:10313000F878B25FEFC654BAB7E865ADE392C84716
-:10314000A230E4DB126EB0BEC3B83E501B8EA27D2F
-:10315000FA5AEFFDDC3824A610E3E8580BA3772CCD
-:10316000270C795FB35E42FB30EA97CEB56C9F4285
-:10317000EF054FF42D598A6431C1B7E0AD1E587F79
-:103180000B73A639E828A27BB1723EFD5DBB0D70C2
-:103190002CB25C76CC10A620BED9A1B810FA819DC5
-:1031A0003F05F19DEF34D1FBBD2546BB89DE8FE89D
-:1031B00026FEE4B24DC69FE8E4055D9C49E3E28F3C
-:1031C00052D19EBC30D240F6DF85AFF0DF03F06C09
-:1031D0005088AF4939C82BE2D42E2F7BABC754841B
-:1031E000FB6E13F527E34F6A33FCA9068CABEFB9EE
-:1031F000292F562539E000F2C373BEDFDC391CEB02
-:103200002DE7EF585E5E764774807AE2FE9A0A01F7
-:10321000AF0A11C7E4C507BDD5E0EF69C9FB1DAC16
-:1032200089CB7BD29EE3FDDDE023885FEF33E25D57
-:10323000E9555EBA97AD8F239ABBCC44714773753D
-:103240007261B5900BAB7F402EFC78A04E2E94BFE0
-:103250009722DA30B5D78718B727EF25969AF8FE68
-:103260002FDDCDC80E5BBA64AC81DE417E85D34DC7
-:10327000E9122EDF94BEEAA2FB85525E7C4FC83174
-:1032800093AEA410DCFF28E4963B30BE12E05BDC7A
-:103290001A26E2B092299D7A85C75B4EB2713ED064
-:1032A000FA067F07A2C367E1F2D461C6DF31D3D14A
-:1032B0006589D16FC00B77CE914097909F80721037
-:1032C000F4370DE5A238A4F3B4428ADF2B52E8DECE
-:1032D0008B9ECE8B4D756F617C68F156E6F4B150D4
-:1032E0003A07FAC5FE7C0ABD0FE0117AADA45F3D36
-:1032F000BDCF8C10F6281BB73775DA255046C54769
-:10330000BA7DA6A918FF3A137D7B3D39C160DC590F
-:10331000642E2F8FDB659ABA0CEF2A7463A7507F57
-:1033200066267878E43B08DDD80DD05E807CF2EE2E
-:103330007BF3CD65217CF2E4A0318307F508E2BB85
-:10334000ACF3BE5F2EBD0BBAF0A14CFA3D9CEEE48F
-:10335000E172802BEE8B99D1ADF7E12FB315E431FB
-:10336000D7B824FC7D41261F210F601CE10C91BFC2
-:10337000272FEFCFAB6C0417CAE7ED8A9B8A712128
-:10338000B5D6D6F14876F3733D45788F31C89FDCCA
-:10339000AE1405F9537E0075C29BB3F83D2FBD3DB9
-:1033A000E29E3C5E5F6F9728CFE57C5BFE2ECA896C
-:1033B00087F6EDC2F34ACEFF4437BFC330358FCB1B
-:1033C000B3FF53F720F4F71F66F5F414E5C17CD77B
-:1033D0001BF87DFE9E6A1313F621F20B4B7EC1C4CF
-:1033E0003B1841BCBBE81DDDC687147BA87DCAB372
-:1033F0004AE1F7E8BBB1E3B09CF627B742BB990DB1
-:1034000066FA1DBFE7B238FD3C07F443BF97623E42
-:10341000F696352D08C74FEB7F69A2DFA561814C79
-:103420007C7F67465D9813F9F1C941EE9938EF88C2
-:103430005C27F1A1C183387D65C4BBBD7978FF6E7F
-:10344000F58167F13D81F92D69F47B25DEFDF92BCE
-:10345000F09D9393833CB3B1DC6BB3D37B1AF396AB
-:10346000C5D0F9353351DC0B65EDE46793F07F305F
-:103470008FEB89D73999F8BD2D71DF01186489A6C2
-:103480009E88EFD6ED0F6927D4DB19F4EF4B7467F4
-:103490005F90F604B41F9843EC8CD23E61CA393178
-:1034A0001DE58652B3F65EA24C7F2DE62FF5C0597E
-:1034B0009DE756EEF844948FD72A767A6FD2E69835
-:1034C0003A02F215474D18D9C98A631D667C7FA060
-:1034D0001DF08BF1D165B05F91CF948A38AD8A0D24
-:1034E0002368BF55F821EDE21D4E99DEB5F650EF89
-:1034F00057917E022EF25B56D85DE6D8907D5FDE56
-:10350000A468DE1D90F9E7F2545A672988E308BFE2
-:10351000BBEF4D33E3DB3EA5204660FCDFAF057D0E
-:10352000C876508FE2418AD3D911FE0E3CCC3B8D38
-:103530008F5710D27F5913BF372DF3509FE49F1739
-:10354000F222A93FAF1DD69D86A99DE609702038BD
-:10355000B5AF81FE1C340EE1A33CE037A1BE5D8A0D
-:103560007128909F61F79B709CB265FC1D13CF6A18
-:103570003E8E67558C7920CA4746BBB937C22F9C0F
-:103580009F57303F92232B002E781F0BEFBBE1D9C2
-:10359000A2878F57CCB7A22986DE51087E5F6B4287
-:1035A0007C4CEFE65D844F05DECB968DA6FBEB15DC
-:1035B0004617DD73F008F87EBE20EC61F40F4C5F17
-:1035C000F784290DFDF882CF7C2AE05A9C1EC8A4FE
-:1035D000F78A168439719ED3ED4DB4BE4EF83E0E77
-:1035E000F050F09D1B37C117E8C287717B15EBB413
-:1035F000F80CCE87C3B7629D97F6DB6CA3C76C0F40
-:103600009DC786039978AF6A3AEC6F7C5782D93DA3
-:10361000745FF28BC7A7A6D23A619E08D748A7630A
-:103620003CBE3F0474C2EFC188F5C87BDD72BCCBE1
-:1036300079FC1EFCE51FDC972E926B1A01BF68F720
-:10364000EE6E5F9A9171C3B8E60AFE3B12FA7D2ACC
-:10365000F7A7DC97729FCAFDFBACC91D4852827C5C
-:1036600006CED9BA97BB80D3E0411C0F33045E016C
-:10367000AE8743EF79F51AC4F15A9AAEDDEFD81F41
-:10368000F66B95E5630299F82E93AC2FC72D8DE567
-:10369000ED90EE91DEAC830C9DF517527DED3D95DE
-:1036A000F24E7EB1637902F28BDD0AF783AE39D434
-:1036B000FBA728BFEEE4F2EBB99AADF3F0BC644689
-:1036C0007F6AE8FBFEB340CE413E315B9CCF158163
-:1036D000AEF9C553599EE44121FBB9E2B19D591E93
-:1036E000CE6F02C86FFEB2F3F53F5DEF089EA77282
-:1036F0003D65ABDE37796DA1F0E37ACEC3391D7439
-:103700001FAFDC667660BC73F9322FF15F960472EE
-:10371000A112127FA6A30BEF3285EE9195D70FF37E
-:10372000ABFF837CBA7C7509BD7B20F126DF6791F6
-:10373000E7AB9CFF4831FF9B06F1F633047DCFA831
-:103740001C6D4E8E27B91BC32CD974F17D7A85F67A
-:103750007B27DE3AFDD7B92B70BFE0FD22D24F5652
-:103760009BB8BD6F07B73F9E5BB8EFF77742BDB31D
-:10377000EB37A532558B379453670B79758EB0FFB5
-:10378000758137F7A090389E39CF71BC95EFFADD7F
-:1037900067F89E5869BAE0776BF83B0065CDBB09C6
-:1037A0008FD357AD35A5213F1A94A6E1E3E575F90E
-:1037B00076B42BCF58B5C9847CC223E1A0DB0FA51A
-:1037C000224E58C219CF2525C4BF21EB237FC4F751
-:1037D000EFEF5D101685F13C729C87049D97D7C56D
-:1037E000C4E278E575DE5FA03E24CF03FD3A4F8644
-:1037F000F1FD5206FDE1BE3D39DA99BA303728CFE6
-:10380000EAEBFBC4BE7BDAC47FA72625A2F9058AB2
-:103810006B981FEE44FED1B76FAB1FC745FAC67950
-:103820009B0DFC776DFAD6B47E85F3E8CB785C0D02
-:10383000A6F83E16FA171220BFD9C0EF6FA5AB3C11
-:10384000DD26E003E5012C67F1ADF4FB1A2171B32D
-:103850001AFA35B32DF4FB89E67846EF9B497A9541
-:10386000FD487A95F4DCDDFA9EBDC6F59D4CE3F08B
-:10387000348BDF4DB9E6F559F8EFE8CA75C9F9811F
-:103880000CEFA2F73D1E1848F69E934B9CA91837E3
-:10389000D9FD7AD7152674B15EFD3AE5BE91B1F037
-:1038A0009DFEAC26EE7738A9C0F906ED4E2E08A392
-:1038B000F836B9AE1F6B0F3F382856D8775A2351C8
-:1038C000CE2C0D0FDE9747F81DAFE7BFAF2BBF4BD8
-:1038D000B940BE3327F9F7A93A716EB2D635B8BFF1
-:1038E000597D06BD7F72BCE96424BEC77272349FE5
-:1038F0009F6C77AF89DF4F66916607DE138BB8F751
-:10390000FDC244F40FAD4BCB57A0DDDDF5838FE353
-:10391000FBE3772F4B24FD7E96CDB102CFC559BE78
-:1039200034F20747ACCBFF02DFD19BB56C00FD6ED4
-:10393000EFBD0A73933E29F484D9ACF38FF4843934
-:1039400082AFCD417E89F7A5EA0FD1BB79B39D61E6
-:10395000F978BECFD9C0F58462035B85FEC43E8D85
-:10396000EEF1C8C7DA9F54F8EF3E6FD4BEC3959C02
-:10397000EDFE0CF98CFEDDBB7B4DCD2E5C07037993
-:1039800004ED4EB36C6E92EB4B05BD1C5FD746BF8A
-:103990009789F0A6DFCBD1D96FFA98F93DE2F648C6
-:1039A00003D9E300EFEFE1EF91E17BEB163A6FB45F
-:1039B000F69B3E0F0EA7DF6B93F7842A84DF49D274
-:1039C0008FF45FCDDA3499EE0FCD427BCDE0E0FD90
-:1039D000A915EBC6D2FB4E156B0BD7E3EFDCA40A9F
-:1039E000389E32B696207E4E6F4A8CC57BB915B58F
-:1039F0008D59785FA862D34ABA37747A5318DD1BA1
-:103A00001A672F1987BF1F327B23BF9F27F7A3CDCC
-:103A1000C9F76355ED58BAF7F3FF00B910AD8C0044
-:103A2000800000001F8B080000000000000BCD5636
-:103A30005B6C1465143EFF3F7BEFECA5ED527AA161
-:103A4000EDB6E5B2EAB69DA51403189834802412A9
-:103A50005D0805368176088114686B4593164364CA
-:103A600061951088711F5AA104CC52A1BEA8D986B5
-:103A70004621AE66A541A236B18117129266FB526D
-:103A80002E11BB564D69A2E039FFCC660997C44799
-:103A9000E7E5ECFFCFB97FDF39B3ED0F473EF1D457
-:103AA00000ECAA02F02C01F82B91178F3080F6431E
-:103AB000972A240E10B06A56650EC03E9EDCBCCC20
-:103AC00007708FC5074B84BE6FAE47067844CFAAF8
-:103AD000A7E5E421009F15A0E3BD9BC2CF7D3EFA80
-:103AE0007A18EDDB3B2EBAC8CFBEBE1B4B3D783FEC
-:103AF000B7462B541AC9EFB9418F0400A7CED5851C
-:103B00006A01BC0AFEC6FBF505A1CD61CC2BF3A36F
-:103B1000A40CF89E1FAFED1226DD903B6F8FBB2DDE
-:103B20001000D05260F190F480A500E51D097A12D2
-:103B300028D75743EB463977BF48417BACF38E3BE0
-:103B40005611C2FB3D83272B7C28EF3AF5F3B6C113
-:103B50002D3F810BF5CF5B2D407626B02868B7331B
-:103B6000C2D4384A682B0028C9C50F2A7922FF3DE4
-:103B7000A730A9C2DC3D405CDCDF35C13ACAA332C4
-:103B80009A09BE85F29629B50BB0CE5B5D7625828B
-:103B900058C88A4FE4732B26ADA5FBC83B0C1630E2
-:103BA0003A5F74CEC7F82D6EE8227BE792448A7B99
-:103BB000B1CFC3F98BA97DF8702802E8F4E8873506
-:103BC00092BCB60CDFEF1F621E2BBADC7FF9EA5AFB
-:103BD000D0CF00ECF9FDDCFB6005F81ECB7BEFF0ED
-:103BE00090C587F1DA3FC77A317E7B62E88752F46D
-:103BF000D3796947831E3706B014F3A09F18A773C3
-:103C000058EF4BC7F084656720E76787BFE0681906
-:103C100062BB29D1B8A50FF576106ECB910F752F29
-:103C20006C3D6C22E911FD0153A622E40438EEBF7D
-:103C30006ED1C8CFFB863FFFF5A3D5A2DE0D85F080
-:103C4000181F9A15B3B0CBDA633F845DAAC3710C19
-:103C5000EA01D44ED94432DA21BB489EE9E27E1310
-:103C6000F655650E45C27EF7D85C75E00698B1EB57
-:103C700032E9D065370F0DEDC61467F8981D90F73F
-:103C8000DD528C915C15E862D869307BB57D341FBC
-:103C9000C59060201A916294F7D4B7B71B28FECA6A
-:103CA000CAF41F802999D9CB5B57233FDE568CFA83
-:103CB00002E906E2F99C2BD04AFC3A6B8663F6C512
-:103CC00054770836D69217FC4DB8CFF2F805CC2FB2
-:103CD000C9529F92FF6CBD9F115FD14FC82A1F63CD
-:103CE00098E79F95DA41CAE30D66AE0D72C2405A5D
-:103CF00040FEA7CCFA7B889D546DC88B269D16503C
-:103D0000CE210248594B69B14CBC66AA0A3D18FF46
-:103D100048E0CA4EE2C7898C0DAC18376AF4A32973
-:103D2000E39860A8575EBA8E431DEAFBBCB00DED68
-:103D3000AF0478C48A799E005B9CF4C1B6464DFB03
-:103D4000F5188FAAD13FB7AB423F796D96A12C935E
-:103D50007E1F71A37E593753A2A8D3323D79F6173F
-:103D600094DB201EA4BEAEF66A7DB40FC6A7D74D65
-:103D70006888EF094FC2467346CFE3F9270FCCBAE4
-:103D80000A782EAFA9CCE4175F2F21695318DA35D2
-:103D900025A594B5EEE97CA68A7D268A837A294EEC
-:103DA000FA328F3346FA233729BF269B9C925C64F4
-:103DB00067FE356DCBD9C15879FEE44B20207E5487
-:103DC000065014D5715B69CC611697CB0A17B85CA5
-:103DD00036F0C9F64F248FF3B1DFA6CFC777F2E0F4
-:103DE00076E24F765EDF34EEA71F54BB69BF4C27E7
-:103DF0006BDC1078FE7CDEC0FD0A8B005EAB52BF30
-:103E0000A77EE1A3DAD07FB3D11FC41BC8AF64F88B
-:103E10006D36FAD42C73BD2F9B9EE88BC1932C0F6B
-:103E2000B2796771CEE207EF8E5D755709DC6A3FA4
-:103E30000281D7CFC4BBF1D9D10F70ACA0545227A7
-:103E4000B4AAFF235E29FB22E475A68F2B03C47F4F
-:103E50006AFC6221558EF5811FC43E68911CCAF12F
-:103E600067EC038DF6413DED839898F3199EB9CA2E
-:103E700019ED832E712E86CC61139EC779DA49F92C
-:103E8000A6EDC87A94EE60B5D8E36534D1353A4EE4
-:103E900034D7670F38078EA37E94A9FD36B48F9A66
-:103EA0008D79DF23C72FE0FD549C47CC18AF373FF7
-:103EB000DEBF1BEF7B9BE72911ECD314187A6D0E44
-:103EC000B11756702ECE9970517CA08AF471AEB1A4
-:103ED000CEDEF08BE23BFED543744E752F00FD7DA8
-:103EE00010169EA2F71BFCC2DF37D93DF3A153F891
-:103EF000EBDDA09638C4FB224EF6870B357BB091E4
-:103F000070D5F5F08F80D03B7D5A2D213C4E6FB49B
-:103F100008BD8F5928BC8BFCD4CACA05F49B0E3B44
-:103F2000BE1CD4E14831BC1FEFD1EBCDF2F7D585F3
-:103F3000FA1EAC8C4CF403B628D204FE2EE4FD38F5
-:103F4000F1B03E870F53118B821C4E593E46CC88F0
-:103F50009757C7EB087B1A2FAF8117EB41DEBA08E2
-:103F6000B784E8FF0CD771E896209D8735495C2916
-:103F7000B6A21CF36AF3F53AC74AE87D8B35DD1823
-:103F80000B109ED09678C61CD6D3929D23EA63343C
-:103F900067AD06CF5BB37C3CF8041FD3F3F227F385
-:103FA0000C3EA2FD4D472848F1EEB31B4BE972F4DD
-:103FB0001F69EBB3E22C0FEA7BE437ABB68CF4E17C
-:103FC000FC5C2EF688479FEBD1E0ED72FACEC0DFA5
-:103FD00023F3E8BBD35F187A85F4ECF333168DFA3C
-:103FE000599231533DE3E17BE5F47FA6B5E79A981A
-:103FF0009BFF9AE7BF3AB4AF4B200A0000000000D5
-:104000000000000000000000000000180000000098
-:104010000000000000000040000000000000000060
-:104020000000002800000000000000000000001058
-:104030000000000000000000000000200000000060
-:104040000000000000000010000000000000000060
-:104050000000000800000000000000000000000058
-:104060000000000000000000000000000000000050
-:104070000000000000000000000000000000000040
-:104080000000000000000000000000000000000030
-:104090000000000000000000000000000000000020
-:1040A0000000000000000000000000000000000010
-:1040B0000000000000000000000000000000000000
-:1040C00000000000000000000000000000000000F0
-:1040D00000000000000000000000000000000000E0
-:1040E00000000000000000000000000000000000D0
-:1040F00000000000000000000000000000000000C0
-:1041000000000000000000000000000000000000AF
-:10411000000000000000000000000000000000009F
-:10412000000000000000000000000000000000008F
-:10413000000000000000000000000000000000007F
-:10414000000000000000000000000000000000006F
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:104170000000332800100000000000080000333069
-:1041800000100000000000020000332800100000B2
-:104190000000001000003A78000000000000000855
-:1041A000000000000000000000000000000000000F
-:1041B00000000000000000000000000000000000FF
-:1041C0000000000000003120000000000000000896
-:1041D00000003360000100040000000100003368AB
-:1041E000000000000000000200003370000000002A
-:1041F000000000080000337400000000000000020E
-:1042000000003A70000000000000000800003A4082
-:10421000000800000000000800003D880040000089
-:104220000000004000003A500008000000000008B4
-:1042300000003A60000800000000000800003A8812
-:1042400000C800000000009800003C180098000022
-:104250000000002800003C580098000000000028E2
-:1042600000003378036000300000036000003EB0BF
-:10427000000800000000000100003EB1000800003E
-:1042800000000001000020080010000000000010E5
-:1042900000002000000000000000000800000000F6
-:1042A000000000000000000000000000000000000E
-:1042B00000000000000000000000000000000000FE
-:1042C00000000000000000000000000000000000EE
-:1042D00000000000000000000000000000000000DE
-:1042E00000000000000000000000000000000000CE
-:1042F00000000000000000000000000000000000BE
-:1043000000000000000000000000000000000000AD
-:10431000000000000000000000000000000000009D
-:10432000000000000000000000000000000000008D
-:10433000000000000000000000000000000000007D
-:10434000000000000000000000000000000000006D
-:10435000000000000000000000000000000000005D
-:10436000000000000000000000000000000000004D
-:10437000000000000000000000000000000000003D
-:10438000000000000000000000000000000000002D
-:10439000000000000000000000000000000000001D
-:1043A000000000000000000000000000000000000D
-:1043B00000000000000000000000000000000000FD
-:1043C00000000000000000000000000000000000ED
-:1043D00000000000000000000000000000000000DD
-:1043E00000000000000000000000000000000000CD
-:1043F00000000000000000000000000000000000BD
-:1044000000000000000000000000000000000000AC
-:10441000000000000000000000000000000000009C
-:10442000000000000000000000000000000000008C
-:10443000000000000000000000000000000000007C
-:10444000000000000000000000000000000012C892
-:10445000008000000000008000000001000000005B
-:1044600000000000000040000490000000000490E4
-:10447000000019C8000000000000000800004948C2
-:1044800000080000000000080000492800080000A3
-:104490000000000800004938000800000000000883
-:1044A00000002008001000000000001000002000A4
-:1044B00000000000000000080000401004900040D0
-:1044C00000000040000049980008000000000001C2
-:1044D00000004999000800000000000100000000F1
-:1044E00000000000000000000000000000000000CC
-:1044F00000000000000000000000000000000000BC
-:1045000000000000000000000000000000000000AB
-:10451000000000000000000000000000000000009B
-:10452000000000000000000000000000000000008B
-:10453000000000000000000000000000000000007B
-:10454000000000000000000000000000000000006B
-:10455000000000000000000000000000000000005B
-:10456000000000000000000000000000000000004B
-:10457000000000000000000000000000000000003B
-:10458000000000000000000000000000000000002B
-:10459000000000000000000000000000000000001B
-:1045A000000000000000000000000000000000000B
-:1045B00000000000000000000000000000000000FB
-:1045C00000000000000000000000000000000000EB
-:1045D00000000000000000000000000000000000DB
-:1045E00000000000000000000000000000000000CB
-:1045F00000000000000000000000000000000000BB
-:104600000000000000000000000040000018000052
-:1046100000000018000043000040000000000040BF
-:1046200000004300004000020000000100004301C0
-:1046300000400002000000000000300000400000C8
-:10464000000000400000000000000000000000002A
-:1046500000003000000800400000000400003004AA
-:10466000000800400000000400004B00002800008B
-:104670000000002800004B50001000000000001057
-:1046800000003800008000000000008000003800BA
-:104690000008008000000002000039000020000037
-:1046A00000000020000020080010000000000010A2
-:1046B0000000200000000000000000080000510879
-:1046C0000008000000000008000051200008000061
-:1046D0000000000800005130000800000000000841
-:1046E000000051C00008000000000001000051C19E
-:1046F0000008000000000001000039400010000424
-:1047000000000004000051D000300018000000102C
-:10471000000051D800300018000000020000000026
-:104720000000000000000000000000000000000089
-:104730000000000000000000000000000000000079
-:104740000000000000000000000000000000000069
-:104750000000000000000000000000000000000059
-:104760000000000000000000000000000000000049
-:104770000000000000000000000000000000000039
-:104780000000000000000000000000000000000029
-:104790000000000000000000000000000000000019
-:1047A0000000000000000000000000000000000009
-:1047B00000000000000000000000000000000000F9
-:1047C00000000000000000000000000000000000E9
-:1047D000000000000000000000000000000023E8CE
-:1047E00000800000000000800000000100000000C8
-:1047F0000000000000002008001000000000001071
-:1048000000002000000000000000000800002DA0B3
-:10481000000800000000000800002DB8000800009B
-:1048200000000008000024E802D00028000002D0A8
-:1048300000002E58000800000000000100002E5962
-:10484000000800000000000100002D90000800009A
-:104850000000000800000000000000000000000050
-:104860000000000000000000000000000000000048
-:104870000000000000000000000000000000000038
-:104880000000000000000000000000000000000028
-:104890000000000000000000000000000000000018
-:1048A0000000000000000000000000000000000008
-:1048B00000000000000000000000000000000000F8
-:1048C00000000000000000000000000000000000E8
-:1048D00000000000000000000000000000000000D8
-:1048E00000000000000000000000000000000000C8
-:1048F00000000000000000000000000000000000B8
-:1049000000000000000000000000000000000000A7
-:104910000000000000000000000000000000000097
-:104920000000000000000000000000000000250062
-:1049300000400000000000080000250800400000C2
-:1049400000000028000009C001200010000000083D
-:104950000000000000000000000000000000000057
-:1049600000000000000000000000402002D00028ED
-:1049700000000008000030000000000000001000EF
-:10498000000050990000000000000001000050B03D
-:104990000000000000000002000045A00090000898
-:1049A00000000008000000000000000000000000FF
-:1049B00000002960000800000000000100002961DB
-:1049C0000008000000000001000029700008000439
-:1049D0000000000200002978000800040000000424
-:1049E00000002FB0000800000000000400002FB4F9
-:1049F000000800000000000400002FC000000000BC
-:104A00000000000800002FC800000000000000089F
-:104A100000003000000000000000001000005040C6
-:104A20000001000100000001000050000000000033
-:104A30000000002000000808001000000000000432
-:104A40000000080C0010000000000001000008B782
-:104A50000000000000000001000008B60000000097
-:104A600000000001000010000030001800000004E9
-:104A700000001004003000180000000400001008BE
-:104A800000300018000000020000100A003000187A
-:104A9000000000020000100C0030001800000001AF
-:104AA0000000100D00300018000000010000100E82
-:104AB0000030001800000001000010100030001845
-:104AC0000000000400001014003000180000000472
-:104AD00000003000010000800008000400003004E5
-:104AE00001000080000800040000000A000000002F
-:104AF000000000000000306801000080000000019C
-:104B00000000306901000080000000010000306CEE
-:104B100001000080000000020000306E01000080F3
-:104B2000000000020000307001000080000000045E
-:104B300000003074010000800000000400003066B6
-:104B400001000080000000020000306401000080CD
-:104B50000000000100003060010000800000000241
-:104B600000003062010000800000000200003050B0
-:104B700001000080000000040000305401000080AB
-:104B80000000000400003058010000800000000414
-:104B90000000305C01000080000000040000307C58
-:104BA00001000080000000010000307D0100008055
-:104BB0000000000100001C180010000000000004AC
-:104BC00000001C30001000000000000400001C3831
-:104BD00000100000000000040000000000000000C1
-:104BE00000000000000000000000000000000000C5
-:104BF00000000000000000000000000000000000B5
-:104C0000000000000000000000004C100008000040
-:104C10000000000200004C1200080000000000022A
-:104C200000004C14000800000000000400004C20AC
-:104C3000000800000000000800004C3000400008A0
-:104C40000000000800004C00000800000000000206
-:104C500000004C02000800000000000100004C04AD
-:104C6000000800000000000200004CD00008000016
-:104C70000000000800004CE00008000000000004F4
-:104C800000004CE4000800000000000100004CF0AF
-:104C9000000800000000000200004CF400080000C2
-:104CA0000000000200004D000008000000000004A9
-:104CB000000050000010000000000004000050043C
-:104CC0000010000000000004000050080010000068
-:104CD00000000004000014000008000000000002B2
-:104CE000000014020008000000000001000014048D
-:104CF000000800000000000200001410000800007E
-:104D0000000000020000141400080000000000026F
-:104D1000000014160008000000000002000019B88E
-:104D20000008000000000008000014200008000037
-:104D3000000000020000142400080000000000022F
-:104D4000000019C8000800000000000800002C1036
-:104D5000000800000000000100002C110008000005
-:104D60000000000100002C120008000000000001FB
-:104D700000002C13000800000000000100002C00BF
-:104D8000000800000000000200002C0200080000E3
-:104D90000000000100002C040008000000000002D8
-:104DA00000002C30000800000000000200002C323F
-:104DB000000800000000000200002C340008000081
-:104DC0000000000200002C2000080000000000018C
-:104DD00000002C21000800000000000100002C222F
-:104DE000000800000000000100002C230008000063
-:104DF0000000000100002C24000800000000000159
-:104E000000002C25000800000000000100002C26F6
-:104E1000000800000000000100001400000800006D
-:104E20000000000200001402000800000000000161
-:104E3000000014040008000000000002000014122A
-:104E400000C00018000000020000141000C000188C
-:104E5000000000020000141C00C000180000000840
-:104E60000000141400C000180000000800001427FF
-:104E700000C00018000000010000142400C0001849
-:104E8000000000020000142600C00018000000010D
-:104E9000000015900008000000000008000015A0A8
-:104EA0000008000000000008000015B00008000025
-:104EB00000000008000000000000000000000000EA
-:104EC00000000000000000000000000000000000E2
-:104ED00000000000000000000000000000000000D2
-:104EE00000000000000000000000000000000000C2
-:104EF00000000000000000000000000000000000B2
-:104F000000000000000000000000000000000000A1
-:104F10000000000000000000000000000000000091
-:104F20000000000000000000000000000000000081
-:104F30000000000000000000000000000000000071
-:104F40000000000000000000000000000000000061
-:104F50000000000000000000000000000000000051
-:104F60000000000000000000000000000000000041
-:104F70000000000000000000000000000000000031
-:104F80000000000000000000000000000000000021
-:104F90000000000000000000000000000000000011
-:104FA0000000000000000000000000000000000001
-:104FB00000000000000000000000000000000000F1
-:104FC00000000000000000000000000000000000E1
-:104FD00000000000000000000000000000000000D1
-:104FE00000000000000000000000000000000000C1
-:104FF00000000000000000000000000000000000B1
-:105000000000000000000000060022000000000078
-:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e1-6.2.5.0.fw.ihex b/firmware/bnx2x/bnx2x-e1-6.2.5.0.fw.ihex
new file mode 100644
index 00000000000..1b535827a74
--- /dev/null
+++ b/firmware/bnx2x/bnx2x-e1-6.2.5.0.fw.ihex
@@ -0,0 +1,9483 @@
+:1000000000003BB0000000680000070C00003C202E
+:1000100000001AF8000043300000007C00005E3051
+:1000200000007A2C00005EB0000000B00000D8E0B4
+:10003000000080200000D99800000088000159C00D
+:100040000000398800015A5000000090000193E040
+:100050000000ABFC0001947800000FFC0002407827
+:100060000000000400025078020400480000000F65
+:100070000204005400000045020400580000000083
+:100080000204005C0000000602040070000000048E
+:1000900002040078000000000204007C1217000037
+:1000A00002040080221700000204008432170000BE
+:1000B00006040088000000050204009C12150000E0
+:1000C000020400A022150000020400A43215000062
+:1000D000060400A800000004020400B8021000009A
+:1000E000020400BC00100000020400C01010000058
+:1000F000020400C420100000020400C830100000F8
+:10010000060400CC00000004020400DC0010000023
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000060400EC00000004A1
+:100130000104012400000000010401280000000067
+:100140000104012C00000000010401300000000047
+:1001500002040004000000FF02040008000000FF89
+:100160000204000C000000FF02040010000000FF69
+:1001700002040014000000FF02040018000000FF49
+:100180000204001C000000FF02040020000000FF29
+:10019000020400240000003E0204002800000000C9
+:1001A0000204002C0000003F020400300000003F69
+:1001B000020400340000003F020400380000000088
+:1001C0000204003C0000003F020400400000003F29
+:1001D000020400440000003F020420080000021155
+:1001E0000204200C0000020002042010000002049F
+:1001F00002042014000002190204201C0000FFFF6A
+:10020000020420200000FFFF020420240000FFFF62
+:10021000020420280000FFFF0604203800000080B0
+:100220000204223807FFFFFF0204223C0000003FC7
+:100230000204224007FFFFFF020422440000000FD7
+:1002400001042248000000000104224C00000000CC
+:1002500001042250000000000104225400000000AC
+:1002600001042258000000000104225C000000008C
+:10027000010422600000000001042264000000006C
+:1002800001042268000000000104226C000000004C
+:10029000010422700000000001042274000000002C
+:1002A00001042278000000000104227C000000000C
+:1002B000020424BC000000010C042000000003E83C
+:1002C0000A042000000000010B0420000000000AC6
+:1002D0000605400000000D0002050044000000205B
+:1002E00002050048000000320205009002150020BF
+:1002F000020500940215002002050098000000305D
+:100300000205009C08100000020500A00000003358
+:10031000020500A400000030020500A80000003122
+:10032000020500AC00000002020500B0000000055C
+:10033000020500B400000006020500B8000000023B
+:10034000020500BC00000002020500C00000000021
+:10035000020500C400000005020500C800000002FC
+:10036000020500CC00000002020500D000000002DF
+:10037000020500D400000001020501140000000184
+:100380000205011C0000000102050120000000021E
+:1003900002050204000000010205020C00000040FA
+:1003A00002050210000000400205021C00000020AF
+:1003B00002050220000000130205022400000020B4
+:1003C000060502400000000A04050280002000002B
+:1003D000020500500000000702050054000000075D
+:1003E00002050058000000000205005C0000000843
+:1003F0000605006000000004020500D800000006A9
+:10040000020500E00000000D020500E40000002DE0
+:10041000020500E800000000020500EC00000020DA
+:10042000020500F000000000020500F400000020BA
+:10043000020500F800000000020500FC000000209A
+:100440000205000400000001020500080000000190
+:100450000205000C00000001020500100000000170
+:100460000205001400000001020500180000000150
+:100470000205001C00000001020500200000000130
+:100480000205002400000001020500280000000110
+:100490000205002C000000010205003000000001F0
+:1004A00002050034000000010205003800000001D0
+:1004B0000205003C000000010205004000000001B0
+:1004C0000406100002000020020600DC000000010B
+:1004D000010600D80000000004060200000302200C
+:1004E000020600DC0000000002060068000000B800
+:1004F0000206007800000114010600B800000000A8
+:10050000010600C8000000000206006C000000B8F0
+:100510000206007C00000114010600BC000000007F
+:10052000010600CC0000000007180400007B00005A
+:100530000818076000140223071C00002A040000AA
+:10054000071C800032110A82071D00001E0C1707CD
+:10055000081D4550575602250118000000000000F4
+:10056000011800040000000001180008000000004D
+:100570000118000C0000000001180010000000002D
+:100580000118001400000000021800200000000103
+:1005900002180024000000020218002800000003D6
+:1005A0000218002C000000000218003000000004B7
+:1005B000021800340000000102180038000000009A
+:1005C0000218003C00000001021800400000000476
+:1005D000021800440000000002180048000000015A
+:1005E0000218004C00000003021800500000000038
+:1005F0000218005400000001021800580000000416
+:100600000218005C000000000218006000000001F9
+:1006100002180064000000030218006800000000D7
+:100620000218006C000000010218007000000004B5
+:100630000218007400000000021800780000000496
+:100640000218007C00000003061800800000000271
+:10065000021800A400003FFF021800A8000003FFDA
+:1006600002180224000000000218023400000000FA
+:100670000218024C00000000021802E4000000FF13
+:100680000618100000000400021B8BC000000001CF
+:10069000021B800000000034021B80400000001894
+:1006A000021B80800000000C021B80C000000020A4
+:1006B0000C1B83000007A1200A1B830000000138E7
+:1006C0000B1B8300000013880A1B834000000000FE
+:1006D0000C1B8340000001F40B1B8340000000054D
+:1006E000021B83800007A120021B83C0000001F4CD
+:1006F000061A100000000273041A19CC0001022728
+:10070000061A2008000000C8061A20000000000297
+:10071000041A499800040228061A2E280000000234
+:10072000061A2E2000000002061A0800000000022F
+:10073000061A080800000004061A08180000000243
+:10074000041A08B00002022C061A2FD0000000067E
+:10075000041A2FE80002022E041A2FC000040230EF
+:10076000041A300000010234061A300400000003AD
+:10077000041A301000010235061A3014000000037C
+:10078000041A302000010236061A3024000000034B
+:10079000041A303000010237061A3034000000031A
+:1007A000041A304000010238061A304400000003E9
+:1007B000041A305000010239061A305400000003B8
+:1007C000041A30600001023A061A30640000000387
+:1007D000041A30700001023B061A30740000000356
+:1007E000041A30800001023C061A30840000000325
+:1007F000041A30900001023D061A309400000003F4
+:10080000041A30A00001023E061A30A400000003C2
+:10081000041A30B00001023F061A30B40000000391
+:10082000041A30C000010240061A30C40000000360
+:10083000041A30D000010241061A30D4000000032F
+:10084000041A30E000010242061A30E400000003FE
+:10085000041A30F000010243061A30F400000003CD
+:10086000041A310000010244061A3104000000039A
+:10087000041A311000010245061A31140000000369
+:10088000041A312000010246061A31240000000338
+:10089000041A313000010247061A31340000000307
+:1008A000041A314000010248061A314400000003D6
+:1008B000041A315000010249061A315400000003A5
+:1008C000041A31600001024A061A31640000000374
+:1008D000041A31700001024B061A31740000000343
+:1008E000041A31800001024C061A31840000000312
+:1008F000041A31900001024D061A319400000003E1
+:10090000041A31A00001024E061A31A400000003AF
+:10091000041A31B00001024F061A31B4000000037E
+:10092000041A31C000010250061A31C4000000034D
+:10093000041A31D000010251061A31D4000000031C
+:10094000041A31E000010252061A31E400000003EB
+:10095000041A31F000010253061A31F400000003BA
+:10096000041A320000010254061A32040000000387
+:10097000041A321000010255061A32140000000356
+:10098000041A322000010256061A32240000000325
+:10099000041A323000010257061A323400000003F4
+:1009A000041A324000010258061A324400000003C3
+:1009B000041A325000010259061A32540000000392
+:1009C000041A32600001025A061A32640000000361
+:1009D000041A32700001025B061A32740000000330
+:1009E000041A32800001025C061A328400000003FF
+:1009F000041A32900001025D061A329400000003CE
+:100A0000041A32A00001025E061A32A4000000039C
+:100A1000041A32B00001025F061A32B4000000036B
+:100A2000041A32C000010260061A32C4000000033A
+:100A3000041A32D000010261061A32D40000000309
+:100A4000041A32E000010262061A32E400000003D8
+:100A5000041A32F000010263061A32F400000003A7
+:100A6000041A330000010264061A33040000000374
+:100A7000041A331000010265061A33140000000343
+:100A8000041A332000010266061A33240000000312
+:100A9000041A333000010267061A333400000003E1
+:100AA000041A334000010268061A334400000003B0
+:100AB000041A335000010269061A3354000000037F
+:100AC000041A33600001026A061A3364000000034E
+:100AD000041A33700001026B061A3374000000031D
+:100AE000041A33800001026C061A338400000003EC
+:100AF000041A33900001026D061A339400000003BB
+:100B0000041A33A00001026E061A33A40000000389
+:100B1000041A33B00001026F061A33B40000000358
+:100B2000041A33C000010270061A33C40000000327
+:100B3000041A33D000010271061A33D400000003F6
+:100B4000041A33E000010272061A33E400000003C5
+:100B5000041A33F000010273061A33F40000000394
+:100B6000041A340000010274061A34040000000361
+:100B7000041A341000010275061A34140000000330
+:100B8000041A342000010276061A342400000003FF
+:100B9000041A343000010277061A343400000003CE
+:100BA000041A344000010278061A3444000000039D
+:100BB000041A345000010279061A3454000000036C
+:100BC000041A34600001027A061A3464000000033B
+:100BD000041A34700001027B061A3474000000030A
+:100BE000041A34800001027C061A348400000003D9
+:100BF000041A34900001027D061A349400000003A8
+:100C0000041A34A00001027E061A34A40000000376
+:100C1000041A34B00001027F061A34B40000000345
+:100C2000041A34C000010280061A34C40000000314
+:100C3000041A34D000010281061A34D400000003E3
+:100C4000041A34E000010282061A34E400000003B2
+:100C5000041A34F000010283061A34F40000000381
+:100C6000041A350000010284061A3504000000034E
+:100C7000041A351000010285061A3514000000031D
+:100C8000041A352000010286061A352400000003EC
+:100C9000041A353000010287061A353400000003BB
+:100CA000041A354000010288061A3544000000038A
+:100CB000041A355000010289061A35540000000359
+:100CC000041A35600001028A061A35640000000328
+:100CD000041A35700001028B061A357400000003F7
+:100CE000041A35800001028C061A358400000003C6
+:100CF000041A35900001028D061A35940000000395
+:100D0000041A35A00001028E061A35A40000000363
+:100D1000041A35B00001028F061A35B40000000332
+:100D2000041A35C000010290061A35C40000000301
+:100D3000041A35D000010291061A35D400000003D0
+:100D4000041A35E000010292061A35E4000000039F
+:100D5000041A35F000010293061A35F4000000036E
+:100D6000041A360000010294061A3604000000033B
+:100D7000041A361000010295061A3614000000030A
+:100D8000041A362000010296061A362400000003D9
+:100D9000041A363000010297061A363400000003A8
+:100DA000041A364000010298061A36440000000377
+:100DB000041A365000010299061A36540000000346
+:100DC000041A36600001029A061A36640000000315
+:100DD000041A36700001029B061A367400000003E4
+:100DE000041A36800001029C061A368400000003B3
+:100DF000041A36900001029D061A36940000000382
+:100E0000041A36A00001029E061A36A40000000350
+:100E1000041A36B00001029F061A36B4000000031F
+:100E2000041A36C0000102A0061A36C400000003EE
+:100E3000041A36D0000102A1061A36D400000003BD
+:100E4000041A36E0000102A2061A36E4000000038C
+:100E5000041A36F0000102A3061A36F4000000035B
+:100E6000041A3700000102A4061A37040000000328
+:100E7000041A3710000102A5061A371400000003F7
+:100E8000041A3720000102A6061A372400000003C6
+:100E9000041A3730000102A7061A37340000000395
+:100EA000041A3740000102A8061A37440000000364
+:100EB000041A3750000102A9061A37540000000333
+:100EC000041A3760000102AA061A37640000000302
+:100ED000041A3770000102AB061A377400000003D1
+:100EE000041A3780000102AC061A378400000003A0
+:100EF000041A3790000102AD061A3794000000036F
+:100F0000041A37A0000102AE061A37A4000000033D
+:100F1000041A37B0000102AF061A37B4000000030C
+:100F2000041A37C0000102B0061A37C400000003DB
+:100F3000041A37D0000102B1061A37D400000003AA
+:100F4000041A37E0000102B2061A37E40000000379
+:100F5000041A37F0000102B3061A37F40000000348
+:100F6000041A3800000102B4061A38040000000315
+:100F7000041A3810000102B5061A381400000003E4
+:100F8000041A3820000102B6061A382400000003B3
+:100F9000041A3830000102B7061A38340000000382
+:100FA000041A3840000102B8061A38440000000351
+:100FB000041A3850000102B9061A38540000000320
+:100FC000041A3860000102BA061A386400000003EF
+:100FD000041A3870000102BB061A387400000003BE
+:100FE000041A3880000102BC061A3884000000038D
+:100FF000041A3890000102BD061A3894000000035C
+:10100000041A38A0000102BE061A38A4000000032A
+:10101000041A38B0000102BF061A38B400000003F9
+:10102000041A38C0000102C0061A38C400000003C8
+:10103000041A38D0000102C1061A38D40000000397
+:10104000041A38E0000102C2061A38E40000000366
+:10105000041A38F0000102C3061A38F40000000335
+:10106000041A3900000102C4061A39040000000302
+:10107000041A3910000102C5061A391400000003D1
+:10108000041A3920000102C6061A392400000003A0
+:10109000041A3930000102C7061A3934000000036F
+:1010A000041A3940000102C8061A3944000000033E
+:1010B000041A3950000102C9061A3954000000030D
+:1010C000041A3960000102CA061A396400000003DC
+:1010D000041A3970000102CB061A397400000003AB
+:1010E000041A3980000102CC061A3984000000037A
+:1010F000041A3990000102CD061A39940000000349
+:10110000041A39A0000102CE061A39A40000000317
+:10111000041A39B0000102CF061A39B400000003E6
+:10112000041A39C0000102D0061A39C400000003B5
+:10113000041A39D0000102D1061A39D40000000384
+:10114000041A39E0000102D2061A39E40000000353
+:10115000041A39F0000102D3061A39F40000000322
+:10116000041A3A00000102D4061A3A0400000003EF
+:10117000041A3A10000102D5061A3A1400000003BE
+:10118000041A3A20000102D6061A3A24000000038D
+:10119000041A3A30000102D7061A3A34000000035C
+:1011A000041A3A40000102D8061A3A44000000032B
+:1011B000041A3A50000102D9061A3A5400000003FA
+:1011C000041A3A60000102DA061A3A6400000003C9
+:1011D000041A3A70000102DB061A3A740000000398
+:1011E000041A3A80000102DC061A3A840000000367
+:1011F000041A3A90000102DD061A3A940000000336
+:10120000041A3AA0000102DE061A3AA40000000304
+:10121000041A3AB0000102DF061A3AB400000003D3
+:10122000041A3AC0000102E0061A3AC400000003A2
+:10123000041A3AD0000102E1061A3AD40000000371
+:10124000041A3AE0000102E2061A3AE40000000340
+:10125000041A3AF0000102E3061A3AF4000000030F
+:10126000041A3B00000102E4061A3B0400000003DC
+:10127000041A3B10000102E5061A3B1400000003AB
+:10128000041A3B20000102E6061A3B24000000037A
+:10129000041A3B30000102E7061A3B340000000349
+:1012A000041A3B40000102E8061A3B440000000318
+:1012B000041A3B50000102E9061A3B5400000003E7
+:1012C000041A3B60000102EA061A3B6400000003B6
+:1012D000041A3B70000102EB061A3B740000000385
+:1012E000041A3B80000102EC061A3B840000000354
+:1012F000041A3B90000102ED061A3B940000000323
+:10130000041A3BA0000102EE061A3BA400000003F1
+:10131000041A3BB0000102EF061A3BB400000003C0
+:10132000041A3BC0000102F0061A3BC4000000038F
+:10133000041A3BD0000102F1061A3BD4000000035E
+:10134000041A3BE0000102F2061A3BE4000000032D
+:10135000041A3BF0000102F3061A3BF400000003FC
+:10136000041A3C00000102F4061A3C0400000003C9
+:10137000041A3C10000102F5061A3C140000000398
+:10138000041A3C20000102F6061A3C240000000367
+:10139000041A3C30000102F7061A3C340000000336
+:1013A000041A3C40000102F8061A3C440000000305
+:1013B000041A3C50000102F9061A3C5400000003D4
+:1013C000041A3C60000102FA061A3C6400000003A3
+:1013D000041A3C70000102FB061A3C740000000372
+:1013E000041A3C80000102FC061A3C840000000341
+:1013F000041A3C90000102FD061A3C940000000310
+:10140000041A3CA0000102FE061A3CA400000003DE
+:10141000041A3CB0000102FF061A3CB400000003AD
+:10142000041A3CC000010300061A3CC4000000037B
+:10143000041A3CD000010301061A3CD4000000034A
+:10144000041A3CE000010302061A3CE40000000319
+:10145000041A3CF000010303061A3CF400000003E8
+:10146000041A3D0000010304061A3D0400000003B5
+:10147000041A3D1000010305061A3D140000000384
+:10148000041A3D2000010306061A3D240000000353
+:10149000041A3D3000010307061A3D340000000322
+:1014A000041A3D4000010308061A3D4400000003F1
+:1014B000041A3D5000010309061A3D5400000003C0
+:1014C000041A3D600001030A061A3D64000000038F
+:1014D000041A3D700001030B061A3D74000000035E
+:1014E000041A3D800001030C061A3D84000000032D
+:1014F000041A3D900001030D061A3D9400000003FC
+:10150000041A3DA00001030E061A3DA400000003CA
+:10151000041A3DB00001030F061A3DB40000000399
+:10152000041A3DC000010310061A3DC40000000368
+:10153000041A3DD000010311061A3DD40000000337
+:10154000041A3DE000010312061A3DE40000000306
+:10155000041A3DF000010313061A3DF400000003D5
+:10156000041A3E0000010314061A3E0400000003A2
+:10157000041A3E1000010315061A3E140000000371
+:10158000041A3E2000010316061A3E240000000340
+:10159000041A3E3000010317061A3E34000000030F
+:1015A000041A3E4000010318061A3E4400000003DE
+:1015B000041A3E5000010319061A3E5400000003AD
+:1015C000041A3E600001031A061A3E64000000037C
+:1015D000041A3E700001031B061A3E74000000034B
+:1015E000041A3E800001031C061A3E84000000031A
+:1015F000041A3E900001031D061A3E9400000003E9
+:10160000041A3EA00001031E061A3EA400000003B7
+:10161000041A3EB00001031F061A3EB40000000386
+:10162000041A3EC000010320061A3EC40000000355
+:10163000041A3ED000010321061A3ED40000000324
+:10164000041A3EE000010322061A3EE400000003F3
+:10165000041A3EF000010323061A3EF400000003C2
+:10166000041A3F0000010324061A3F04000000038F
+:10167000041A3F1000010325061A3F14000000035E
+:10168000041A3F2000010326061A3F24000000032D
+:10169000041A3F3000010327061A3F3400000003FC
+:1016A000041A3F4000010328061A3F4400000003CB
+:1016B000041A3F5000010329061A3F54000000039A
+:1016C000041A3F600001032A061A3F640000000369
+:1016D000041A3F700001032B061A3F740000000338
+:1016E000041A3F800001032C061A3F840000000307
+:1016F000041A3F900001032D061A3F9400000003D6
+:10170000041A3FA00001032E061A3FA400000003A4
+:10171000041A3FB00001032F061A3FB40000000373
+:10172000041A3FC000010330061A3FC40000000342
+:10173000041A3FD000010331061A3FD40000000311
+:10174000041A3FE000010332061A3FE400000007DC
+:10175000041A4CB000080333061A400000000124AC
+:10176000021A492000000000061A2500000000109F
+:10177000061A258000000012061A09C00000004861
+:10178000061A080000000002061A082000000012D5
+:10179000041A2FB00002033B041A4CF00002033D70
+:1017A000061A500000000004061A449000000124AC
+:1017B000021A492400000000061A2540000000100B
+:1017C000061A25C800000012061A0AE000000048A8
+:1017D000061A081000000002061A0868000000122D
+:1017E000041A2FB80002033F041A4CF80002034108
+:1017F000061A5010000000040200A468000AFFDC72
+:101800000200A280000000010200A294071D29111D
+:101810000200A298000000000200A29C009C042488
+:101820000200A2A0000000000200A2A40000020921
+:101830000200A4FCFF000000020100B4000000014F
+:10184000020100B800000001020100DC00000001FC
+:10185000020101000000000102010104000000017A
+:101860000201007C0030000002010084000000281A
+:101870000201008C000000000201013000000004A1
+:101880000201025C000000010201032800000000C8
+:101890000201055400000030020100C400000001F4
+:1018A000020100CC00000001020100F8000000016C
+:1018B000020100F000000001020100800030000081
+:1018C00002010088000000280201009000000000D2
+:1018D0000201013400000004020102DC00000001EA
+:1018E0000201032C0000000002010564000000302A
+:1018F000020100C800000001020100D00000000148
+:10190000020100FC00000001020100F400000001DF
+:10191000020C100000000028020C200800000A1130
+:10192000020C200C00000A00020C201000000A0427
+:10193000020C201C0000FFFF020C20200000FFFF13
+:10194000020C20240000FFFF020C20280000FFFFF3
+:10195000020C203800000020020C203C0000002176
+:10196000020C204000000022020C20440000002352
+:10197000020C204800000024020C204C000000252E
+:10198000020C205000000026020C2054000000270A
+:10199000020C205800000028020C205C00000029E6
+:1019A000020C20600000002A020C20640000002BC2
+:1019B000020C20680000002C020C206C0000002D9E
+:1019C000020C20700000002E020C20740000002F7A
+:1019D000020C207800000010060C207C0000004F54
+:1019E000020C21B800000001020C21BC0000000123
+:1019F000020C21C000000001020C21C40000000103
+:101A0000020C21C800000001020C21CC00000001E2
+:101A1000020C21D000000001020C21D400000001C2
+:101A2000020C21D800000001020C21DC00000001A2
+:101A3000020C21E000000001020C21E40000000182
+:101A4000020C21E800000001020C21EC0000000162
+:101A5000020C21F000000001020C21F40000000142
+:101A6000020C21F800000001060C21FC0000000F10
+:101A7000020C223807FFFFFF020C223C0000003F4F
+:101A8000020C224007FFFFFF020C22440000000F5F
+:101A9000010C224800000000010C224C0000000054
+:101AA000010C225000000000010C22540000000034
+:101AB000010C225800000000010C225C0000000014
+:101AC000010C226000000000010C226400000000F4
+:101AD000010C226800000000010C226C00000000D4
+:101AE000010C227000000000010C227400000000B4
+:101AF000010C227800000000010C227C0000000094
+:101B0000020C24BC000000010C0C2000000003E8C3
+:101B10000A0C2000000000010B0C20000000000A4D
+:101B2000020C400800000562020C400C0000055148
+:101B3000020C401000000555020C40140000057214
+:101B4000020C401C0000FFFF020C40200000FFFFC1
+:101B5000020C40240000FFFF020C40280000FFFFA1
+:101B6000020C403800000046020C403C0000000C13
+:101B7000060C40400000005E020C41B8000000016D
+:101B8000060C41BC0000001F020C423807FFFFFF9B
+:101B9000020C423C0000003F020C424007FFFFFFE6
+:101BA000020C42440000000F010C424800000000FB
+:101BB000010C424C00000000010C425000000000EB
+:101BC000010C425400000000010C425800000000CB
+:101BD000010C425C00000000010C426000000000AB
+:101BE000010C426400000000010C4268000000008B
+:101BF000010C426C00000000010C4270000000006B
+:101C0000010C427400000000010C4278000000004A
+:101C1000010C427C00000000010C4280000000002A
+:101C2000020C44C0000000010C0C4000000003E85E
+:101C30000A0C4000000000010B0C40000000000AEC
+:101C4000060D400000000A00020D004400000032B2
+:101C5000020D008C02150020020D009002150020DC
+:101C6000020D009408100000020D009800000033DF
+:101C7000020D009C00000002020D00A00000000008
+:101C8000020D00A400000005020D00A800000005E0
+:101C9000060D00AC00000002020D00B400000002BE
+:101CA000020D00B800000003020D00BC000000029D
+:101CB000020D00C000000001020D00C8000000027B
+:101CC000020D00CC00000002020D015C00000001CA
+:101CD000020D016400000001020D01680000000215
+:101CE000020D020400000001020D020C00000020A1
+:101CF000020D021000000040020D0214000000401E
+:101D0000020D022000000003020D02240000001852
+:101D1000060D028000000012040D030000180343AA
+:101D2000060D03600000000C020D004C00000001D5
+:101D3000020D005000000002020D005400000000DF
+:101D4000020D005800000008060D005C00000004B1
+:101D5000020D00C400000004020D0114000000097F
+:101D6000020D011800000029020D011C0000000AEC
+:101D7000020D01200000002A020D012400000000D5
+:101D8000020D012800000020020D012C00000000BF
+:101D9000020D013000000020020D0134000000009F
+:101DA000020D013800000020020D013C000000007F
+:101DB000020D014000000020020D0144000000005F
+:101DC000020D014800000020020D00040000000187
+:101DD000020D000800000001020D000C00000001CF
+:101DE000020D001000000001020D001400000001AF
+:101DF000020D001800000001020D001C000000018F
+:101E0000020D002000000001020D0024000000016E
+:101E1000020D002800000001020D002C000000014E
+:101E2000020D003000000001020D0034000000012E
+:101E3000020D003800000001020D003C000000010E
+:101E4000060E200000000800020E004C00000032C8
+:101E5000020E009402150020020E009802150020C8
+:101E6000020E009C00000030020E00A008100000CE
+:101E7000020E00A400000033020E00A80000003093
+:101E8000020E00AC00000031020E00B000000002A3
+:101E9000020E00B400000004020E00B800000000B2
+:101EA000020E00BC00000002020E00C00000000292
+:101EB000020E00C400000000020E00C80000000274
+:101EC000020E00CC00000007020E00D0000000024D
+:101ED000020E00D400000002020E00D80000000133
+:101EE000020E014400000001020E014C000000013E
+:101EF000020E015000000002020E02040000000168
+:101F0000020E020C00000040020E02100000004011
+:101F1000020E021C00000004020E0220000000203D
+:101F2000020E02240000000E020E02280000001B18
+:101F3000060E030000000012040E0280001B035B6B
+:101F4000060E02EC00000005020E00540000000C1A
+:101F5000020E00580000000C020E005C00000000A1
+:101F6000020E006000000010060E00640000000475
+:101F7000020E00DC00000003020E01100000000F42
+:101F8000020E01140000002F020E011800000000D4
+:101F9000020E011C00000020020E000400000001DF
+:101FA000020E000800000001020E000C00000001FB
+:101FB000020E001000000001020E001400000001DB
+:101FC000020E001800000001020E001C00000001BB
+:101FD000020E002000000001020E0024000000019B
+:101FE000020E002800000001020E002C000000017B
+:101FF000020E003000000001020E0034000000015B
+:10200000020E003800000001020E003C000000013A
+:10201000020E004000000001020E0044000000011A
+:102020000730040000AF0000083007680013037693
+:1020300007340000331C00000734800032780CC8DD
+:10204000073500001A801967083539B058CA037877
+:10205000013000000000000001300004000000001A
+:1020600001300008000000000130000C00000000FA
+:1020700001300010000000000130001400000000DA
+:1020800002300020000000010230002400000002A5
+:1020900002300028000000030230002C0000000085
+:1020A0000230003000000004023000340000000163
+:1020B00002300038000000000230003C0000000147
+:1020C0000230004000000004023000440000000024
+:1020D00002300048000000010230004C0000000304
+:1020E00002300050000000000230005400000001E7
+:1020F00002300058000000040230005C00000000C4
+:1021000002300060000000010230006400000003A3
+:1021100002300068000000000230006C0000000186
+:102120000230007000000004023000740000000063
+:1021300002300078000000040230007C0000000340
+:102140000630008000000002023000A400003FFFC3
+:10215000023000A8000003FF02300224000000004B
+:1021600002300234000000000230024C0000000087
+:10217000023002E40000FFFF0630200000000800EB
+:1021800002338BC000000001023380000000001AFF
+:10219000023380400000004E0233808000000010B7
+:1021A000023380C0000000200C3383000007A12010
+:1021B0000A338300000001380B33830000001388CA
+:1021C0000A338340000000000C338340000001F418
+:1021D0000B33834000000005023383800007A120F9
+:1021E000023383C0000001F406322A88000000C2D6
+:1021F00006322008000000C806322000000000025D
+:10220000063223E80000004004322E580004037A0E
+:10221000063250A000000004063250B80000000250
+:102220000632508000000006043250980002037EFF
+:10223000063250000000002006323000000004008A
+:1022400006321C0000000004043218300002038033
+:10225000063224E8000000B402322DB00000000075
+:1022600006324000000000B40632300000000020BA
+:10227000063231000000002006323200000000204B
+:102280000632330000000020063234000000002037
+:102290000632350000000020063236000000002023
+:1022A000063237000000002006323800000000200F
+:1022B000063239000000002006323A0000000020FB
+:1022C00006323B000000002006323C0000000020E7
+:1022D00006323D000000002006323E0000000020D3
+:1022E00006323F000000002006321C1000000002F1
+:1022F000063245A000000024063227B8000000B4D2
+:1023000002322DB400000000063242D0000000B4BA
+:1023100006323080000000200632318000000020AC
+:102320000632328000000020063233800000002098
+:102330000632348000000020063235800000002084
+:102340000632368000000020063237800000002070
+:10235000063238800000002006323980000000205C
+:1023600006323A800000002006323B800000002048
+:1023700006323C800000002006323D800000002034
+:1023800006323E800000002006323F800000002020
+:1023900006321C20000000020632463000000024F5
+:1023A0000720040000870000082007800010038237
+:1023B000072400003165000007248000081D0C5A26
+:1023C00008248EB06C9003840120000000000000FF
+:1023D00001200004000000000120000800000000AF
+:1023E0000120000C0000000001200010000000008F
+:1023F0000120001400000000022000200000000165
+:102400000220002400000002022000280000000337
+:102410000220002C00000000022000300000000418
+:1024200002200034000000010220003800000000FB
+:102430000220003C000000010220004000000004D7
+:1024400002200044000000000220004800000001BB
+:102450000220004C00000003022000500000000099
+:102460000220005400000001022000580000000477
+:102470000220005C0000000002200060000000015B
+:102480000220006400000003022000680000000039
+:102490000220006C00000001022000700000000417
+:1024A00002200074000000000220007800000004F8
+:1024B0000220007C000000030620008000000002D3
+:1024C000022000A400003FFF022000A8000003FF3C
+:1024D000022002240000000002200234000000005C
+:1024E0000220024C00000000022002E40000FFFF76
+:1024F000062020000000080002238BC0000000011D
+:10250000022380000000001002238040000000121F
+:102510000223808000000030022380C00000000EF3
+:102520000C2383000007A1200A2383000000013848
+:102530000B238300000013880A238340000000005F
+:102540000C238340000001F40B23834000000005AE
+:10255000022383800007A120022383C0000001F42E
+:10256000062250000000004206222008000000C899
+:10257000062220000000000206224000000000C6E3
+:1025800004224318000503860622432C0000000B9A
+:10259000042243580005038B0622436C0000000B05
+:1025A0000422439800050390062243AC0000000B70
+:1025B000042243D800050395062243EC0000000BDB
+:1025C000042244180005039A0622442C0000000B44
+:1025D000042244580005039F0622446C0000000BAF
+:1025E00004224498000503A4062244AC0000000B1A
+:1025F000042244D8000503A9062244EC0000000B85
+:1026000004224518000503AE0622452C0000000BED
+:1026100004224558000503B30622456C0000000B58
+:1026200004224598000503B8062245AC0000000BC3
+:10263000042245D8000503BD062245EC0000000B2E
+:1026400004224618000503C20622462C0000000B97
+:1026500004224658000503C70622466C0000000B02
+:1026600004224698000503CC062246AC0000000B6D
+:10267000042246D8000503D1062246EC0000000BD8
+:1026800004224718000503D60622472C0000000B41
+:1026900004224758000503DB0622476C0000000BAC
+:1026A00004224798000503E0062247AC0000000B17
+:1026B000042247D8000503E5062247EC0000000B82
+:1026C00004224818000503EA0622482C0000000BEB
+:1026D00004224858000503EF0622486C0000000B56
+:1026E00004224898000503F4062248AC0000000BC1
+:1026F000042248D8000503F9062248EC0000000B2C
+:1027000004224918000503FE0622492C0000000B94
+:1027100004224958000504030622496C0000000BFE
+:102720000422499800050408062249AC0000000B69
+:10273000042249D80005040D062249EC0000000BD4
+:1027400004224A180005041206224A2C0000000B3D
+:1027500004224A580005041706224A6C0000000BA8
+:1027600004224A980005041C06224AAC0000000B13
+:1027700004224AD80005042106224AEC0000000584
+:1027800006224B000000001704224B5C00010426C7
+:1027900006224B600000000304224B6C000104275A
+:1027A000062238000000004006223000000002002F
+:1027B000042251C00004042806221000000000C0BA
+:1027C000062215C00000024004221EC80008042C86
+:1027D0000622390000000008022251180000000003
+:1027E000062251D00000000606221300000000025D
+:1027F00006221410000000300622392000000008D4
+:102800000222511C00000000062251E800000006D0
+:102810000622130800000002062214D00000003037
+:102820000216100000000028021700080000000235
+:102830000217002C000000030217003C00000004F7
+:1028400002170044000000000217004800000002C8
+:102850000217004C0000009002170050000000908A
+:102860000217005400800090021700580810000062
+:10287000021700600000008A021700640000008058
+:1028800002170068000000810217006C0000008041
+:10289000021700700000000602170078000007D041
+:1028A0000217007C0000076C02170038007C10043F
+:1028B000021700040000000F06164024000000026A
+:1028C000021640700000001C0216420800000001C1
+:1028D0000216421000000001021642200000000112
+:1028E00002164228000000010216423000000001DA
+:1028F000021642380000000102164260000000018A
+:102900000C16401C0003D0900A16401C0000009CCE
+:102910000B16401C000009C40216403000000008DD
+:10292000021640340000000C02164038000000106F
+:102930000216404400000020021640000000000182
+:10294000021640D8000000010216400800000001F5
+:102950000216400C000000010216401000000001A9
+:10296000021642400000000002164248000000002B
+:1029700006164270000000020216425000000000DD
+:1029800002164258000000000616428000000002B5
+:1029900002166008000006140216600C0000060013
+:1029A00002166010000006040216601C0000FFFF03
+:1029B000021660200000FFFF021660240000FFFFE7
+:1029C000021660280000FFFF021660380000002099
+:1029D0000216603C00000020061660400000000265
+:1029E00002166048000000230216604C000000241C
+:1029F00002166050000000250216605400000026F8
+:102A000002166058000000270216605C00000029D2
+:102A1000021660600000002A021660640000002BAD
+:102A2000021660680000002C0216606C0000002D89
+:102A30000616607000000012021660B80000000167
+:102A4000021660BC00000001061660C00000003ED7
+:102A5000021661B800000001061661BC0000001FEC
+:102A60000216623807FFFFFF0216623C0000003FBB
+:102A70000216624007FFFFFF021662440000000FCB
+:102A800001166248000000000116624C00000000C0
+:102A900001166250000000000116625400000000A0
+:102AA00001166258000000000116625C0000000080
+:102AB0000116626000000000011662640000000060
+:102AC00001166268000000000116626C0000000040
+:102AD0000116627000000000011662740000000020
+:102AE00001166278000000000116627C0000000000
+:102AF000021664BC000000010C166000000003E830
+:102B00000A166000000000010B1660000000000AB9
+:102B100002168040000000060216804400000005F6
+:102B2000021680480000000A0216804C00000005D2
+:102B30000216805400000002021680CC000000043F
+:102B4000021680D000000004021680D400000004A9
+:102B5000021680D800000004021680DC0000000489
+:102B6000021680E000000004021680E40000000469
+:102B7000021680E800000004021688040000000429
+:102B8000021680300000007C021680340000003DF8
+:102B9000021680380000003F0216803C0000009CB6
+:102BA000021680F000000007061680F40000000501
+:102BB0000216880C010101010216810800000000C4
+:102BC0000216810C000000040216811000000004AF
+:102BD0000216811400000002021688100801200469
+:102BE00002168118000000050216811C0000000575
+:102BF0000216812000000005021681240000000555
+:102C00000216882C200810010216812800000008F6
+:102C10000216812C00000006021681300000000719
+:102C200002168134000000000216883001010120E4
+:102C300006168138000000040216883401010101E3
+:102C400006168148000000040216883801010101BF
+:102C500006168158000000040216883C010101019B
+:102C6000061681680000000302168174000000014E
+:102C7000021688400101010102168178000000015E
+:102C80000216817C00000001021681800000000114
+:102C9000021681840000000102168844010101012E
+:102CA00002168188000000010216818C00000004D9
+:102CB00002168190000000040216819400000002B8
+:102CC00002168848080120040216819800000005B9
+:102CD0000216819C00000005021681A0000000057C
+:102CE000021681A4000000050216881420081001B5
+:102CF000021681A800000008021681AC0000000640
+:102D0000021681B000000007021681B40000000125
+:102D10000216881801010120021681B80000000186
+:102D2000021681BC00000001021681C000000001F3
+:102D3000021681C4000000010216881C0101010175
+:102D4000021681C800000001021681CC00000001BB
+:102D5000021681D000000001021681D4000000019B
+:102D60000216882001010101021681D8000000012D
+:102D7000021681DC00000001021681E00000000163
+:102D8000021681E4000000010216882401010101FD
+:102D9000021681E800000001021681EC000000012B
+:102DA000021681F0000000010216882801010101CD
+:102DB00002168240FFFF003F061682440000000218
+:102DC0000216824CFFFF003F0216825000000100F5
+:102DD000021682540000010006168258000000020C
+:102DE00002168260000000C002168264000000C06B
+:102DF0000216826800001E000216826C00001E008F
+:102E0000021682700000400002168274000040002A
+:102E100002168278000080000216827C000080008A
+:102E2000021682800000200002168284000020002A
+:102E30000616828800000007021682A40000000126
+:102E4000061682A80000000A021681F400000C0891
+:102E5000021681F800000040021681FC000001000B
+:102E600002168200000000200216820400000017F3
+:102E700002168208000000800216820C0000020088
+:102E8000021682100000000002168218FFFF01FFE8
+:102E900002168214FFFF01FF0216823C000000139D
+:102EA000021680900000013F021680600000014081
+:102EB00002168064000001400616806800000002CF
+:102EC00002168070000000C0061680740000000723
+:102ED0000216809C00000048021680A000000048F6
+:102EE000061680A400000002021680AC0000004814
+:102EF000061680B00000000702168238000080002D
+:102F000002168234000025E40216809400007FFF40
+:102F100002168220000000070216821C0000000733
+:102F2000021682280000000002168224FFFFFFFF25
+:102F300002168230000000000216822CFFFFFFFF05
+:102F4000021680EC000000FF0214000000000001E7
+:102F50000214000C000000010214004000000001F7
+:102F60000214004400007FFF0214000C0000000067
+:102F700002140000000000000214006C00000000B9
+:102F800002140004000000010214003000000001DF
+:102F900002140004000000000214005C00000000A5
+:102FA00002140008000000010214003400000001B7
+:102FB000021400080000000002140060000000007D
+:102FC00006028000000020000202005800000032CB
+:102FD000020200A003150020020200A40315002035
+:102FE000020200A801000030020200AC081000003C
+:102FF000020200B000000033020200B40000003002
+:10300000020200B800000031020200BC0000000310
+:10301000020200C000000006020200C4000000031B
+:10302000020200C800000003020200CC00000002FF
+:10303000020200D000000000020200D400000002E2
+:10304000020200DC00000000020200E000000006B6
+:10305000020200E400000004020200E80000000296
+:10306000020200EC00000002020200F00000000179
+:10307000020200FC00000006020201200000000025
+:103080000202013400000002020201B0000000014F
+:103090000202020C00000001020202140000000102
+:1030A00002020218000000020202040400000001F3
+:1030B0000202040C00000040020204100000004064
+:1030C0000202041C00000004020204200000002090
+:1030D0000202042400000002020204280000001F73
+:1030E00006020500000000120402048000200434DF
+:1030F000020200600000000F0202006400000007EE
+:1031000002020068000000000202006C0000000ED5
+:103110000602007000000004020200F40000000437
+:103120000202000400000001020200080000000189
+:103130000202000C00000001020200100000000169
+:103140000202001400000001020200180000000149
+:103150000202001C00000001020200200000000129
+:103160000202002400000001020200280000000109
+:103170000202002C000000010202003000000001E9
+:1031800002020034000000010202003800000001C9
+:103190000202003C000000010202004000000001A9
+:1031A0000202004400000001020200480000000189
+:1031B0000202004C00000001020200500000000169
+:1031C00002020108000000C802020118000000020B
+:1031D000020201C400000000020201CC0000000055
+:1031E000020201D400000002020201DC0000000221
+:1031F000020201E4000000FF020201EC000000FFF7
+:103200000202010C000000C80202011C00000002C2
+:10321000020201C800000000020201D0000000000C
+:10322000020201D800000002020201E000000002D8
+:10323000020201E8000000FF020201F0000000FFAE
+:1032400007280400008D00000828076800130454B4
+:10325000072C000034090000072C800038990D036A
+:10326000072D0000390C1B2A072D80000641296E0E
+:10327000082D8AB04EAA0456012800000000000064
+:1032800001280004000000000128000800000000E0
+:103290000128000C000000000128001000000000C0
+:1032A0000128001400000000022800200000000196
+:1032B0000228002400000002022800280000000369
+:1032C0000228002C0000000002280030000000044A
+:1032D000022800340000000102280038000000002D
+:1032E0000228003C00000001022800400000000409
+:1032F00002280044000000000228004800000001ED
+:103300000228004C000000030228005000000000CA
+:1033100002280054000000010228005800000004A8
+:103320000228005C0000000002280060000000018C
+:10333000022800640000000302280068000000006A
+:103340000228006C00000001022800700000000448
+:103350000228007400000000022800780000000429
+:103360000228007C00000003062800800000000204
+:10337000022800A400003FFF022800A8000003FF6D
+:10338000022802240000000002280234000000008D
+:103390000228024C00000000022802E40000FFFFA7
+:1033A0000628200000000800022B8BC0000000014E
+:1033B000022B800000000000022B8040000000185B
+:1033C000022B80800000000C022B80C000000066F1
+:1033D0000C2B83000007A1200A2B8300000001387A
+:1033E0000B2B8300000013880A2B83400000000091
+:1033F0000C2B8340000001F40B2B834000000005E0
+:10340000022B83800007A120022B83C0000001F45F
+:10341000062A3D4800000004042A3D5800020458D2
+:10342000062A3D6000000006062A30000000004821
+:10343000062A2008000000C8062A2000000000021A
+:10344000062A31280000008E062A33680000000397
+:10345000042A33740001045A062A3A780000000254
+:10346000042A3A800002045B042A3A700002045DD8
+:10347000042A3E280002045F042A3EB000040461CE
+:10348000042A250000020465062A25080000010020
+:10349000062A297000000004042A29600004046739
+:1034A000042A2F480002046B062A3378000000D853
+:1034B000022A3A3800000000062A3A88000000324A
+:1034C000042A3D880010046D062A502000000002E6
+:1034D000062A503000000002062A500000000002B8
+:1034E000062A501000000002022A50B80000000115
+:1034F000062A50480000000E042A3D780002047D90
+:10350000062A3C1800000026022A50400000000055
+:10351000062A36D8000000D8022A3A3C00000000F3
+:10352000062A3B5000000032042A3DC80010047FE8
+:10353000062A502800000002062A50380000000227
+:10354000062A500800000002062A50180000000257
+:10355000022A50BC00000001062A50800000000E24
+:10356000042A3D800002048F062A3CB00000002699
+:10357000022A504400000000021010080000000160
+:103580000210101000000264021010000003D000AE
+:10359000021010040000003D091018000200049100
+:1035A00009101100001006910610114000000008DB
+:1035B00009101160000806A1061011800000000229
+:1035C00009101188000606A9061011A000000018B5
+:1035D000021010100000000006102400000000E09F
+:1035E0000210201C0000000002102020000000013A
+:1035F000021020C0000000010210200400000001A1
+:10360000021020080000000109103C00000506AF70
+:1036100009103C20000506B409103800000506B961
+:1036200002104028000000100210404400003FFF3C
+:103630000210405800280000021040840084924A82
+:1036400006104C000000010002104058000000006D
+:103650000610806800000004021080000000108046
+:1036600006108028000000020210803800000010C0
+:10367000021080400000FFFF021080440000FFFFA6
+:1036800002108050000000000210810000000000C5
+:10369000061081200000000202108008000002B520
+:1036A0000210801000000000061082000000004A96
+:1036B000021081080001FFFF061081400000000297
+:1036C0000210800000001A80061090000000002404
+:1036D000061091200000004A061093700000004A76
+:1036E000061095C00000004A0210800400001080FF
+:1036F00006108030000000020210803C0000001024
+:10370000021080480000FFFF0210804C0000FFFF05
+:10371000021080540000000002108104000000002C
+:1037200006108128000000020210800C000002B583
+:103730000210801400000000061084000000004AFF
+:103740000210810C0001FFFF0610814800000002FA
+:103750000210800400001A800610909000000024DF
+:10376000061092480000004A061094980000004A93
+:10377000061096E80000004A0212049000E383401D
+:103780000212051400003C10021205200000000285
+:1037900002120494FFFFFFFF02120498FFFFFFFFD5
+:1037A0000212049CFFFFFFFF021204A0FFFFFFFFB5
+:1037B000021204A4FFFFFFFF021204A8FFFFFFFF95
+:1037C000021204ACFFFFFFFF021204B0FFFFFFFF75
+:1037D000021204B8FFFFFFFF021204BCFFFFFFFF4D
+:1037E000021204C0FFFFFFFF021204C4FFFFFFFF2D
+:1037F000021204C8FFFFFFFF021204CCFFFFFFFF0D
+:10380000021204D0FFFFFFFF021204DCFFFFFFFFE4
+:10381000021204E0FFFFFFFF021204E4FFFFFFFFBC
+:10382000021204E8FFFFFFFF021204ECFFFFFFFF9C
+:10383000021204F0FFFFFFFF021204F4FFFFFFFF7C
+:10384000021204F8FFFFFFFF021204FCFFFFFFFF5C
+:1038500002120500FFFFFFFF02120504FFFFFFFF3A
+:1038600002120508FFFFFFFF0212050CFFFFFFFF1A
+:1038700002120510FFFFFFFF021204D4FFFF3330D6
+:10388000021204D8FFFF3340021204B4F0003000EB
+:1038900002120390000000080212039C00000008BE
+:1038A000061203A000000002021203BC0000000484
+:1038B000021203C400000004021203D00000000042
+:1038C000021203DC000000000212036C0000000181
+:1038D000021203680000003F021201BC0000004019
+:1038E000021201C000001808021201C400000803FF
+:1038F000021201C800000803021201CC00000040BF
+:10390000021201D000000003021201D400000803DB
+:10391000021201D800000803021201DC00000803B3
+:10392000021201E000010003021201E4000008039A
+:10393000021201E800000803021201EC000000037B
+:10394000021201F000000003021201F40000000363
+:10395000021201F800000003021201FC0000000343
+:103960000212020000000003021202040000000321
+:1039700002120208000000030212020C0000000301
+:1039800002120210000000030212021400000003E1
+:1039900002120218000000030212021C00000003C1
+:1039A00002120220000000030212022400000003A1
+:1039B00002120228000024030212022C0000002F31
+:1039C0000212023000000009021202340000001945
+:1039D00002120238000001840212023C000001833E
+:1039E0000212024000000306021202440000001905
+:1039F00002120248000000060212024C00000306F8
+:103A000002120250000003060212025400000306D4
+:103A10000212025800000C860212025C000003062B
+:103A20000212026000000306021202640000000697
+:103A300002120268000000060212026C000000067A
+:103A4000021202700000000602120274000000065A
+:103A500002120278000000060212027C000000063A
+:103A6000021202800000000602120284000000061A
+:103A700002120288000000060212028C00000006FA
+:103A800002120290000000060212029400000006DA
+:103A900002120298000000060212029C00000006BA
+:103AA000021202A000000306021202A4000000138A
+:103AB000021202A800000006021202B00000100468
+:103AC000021202B400001004021203240010644029
+:103AD0000212032800106440021201B0000000012D
+:103AE0000600A000000000160200A06CBF5C0000F1
+:103AF0000200A070FFF51FEF0200A0740000FFFF9E
+:103B00000200A078F00003E00200A07C00000000AA
+:103B10000200A0800000A0000600A08400000005B4
+:103B20000200A0980FE000000600A09C0000001416
+:103B30000200A0EC555400000200A0F05555555568
+:103B40000200A0F4000055550200A0F8F0000000AB
+:103B50000200A0FC555400000200A1005555555527
+:103B60000200A104000055550200A108F000000069
+:103B70000600A22C000000040200A0600000030761
+:103B80000200A10CBF5C00000200A110FFF51FEFB6
+:103B90000200A1140000FFFF0200A118F00003E0E2
+:103BA0000200A11C000000000200A1200000A000F3
+:103BB0000600A124000000050200A1380FE000006B
+:103BC0000600A13C000000140200A18C5554000026
+:103BD0000200A190555555550200A194000055557D
+:103BE0000200A198F00000000200A19C55540000C2
+:103BF0000200A1A0555555550200A1A4000055553D
+:103C00000200A1A8F00000000600A23C0000000491
+:103C10000200A06400000307000000000000000094
+:103C20000000002E00000000000000000000000066
+:103C30000000000000000000000000000000000084
+:103C40000000000000000000000000000000000074
+:103C50000000000000000000000000000000000064
+:103C60000000000000000000000000000000000054
+:103C70000000000000000000002E004D00000000C9
+:103C80000000000000000000000000000000000034
+:103C90000000000000000000000000000000000024
+:103CA00000000000004D008B00000000000000003C
+:103CB0000000000000000000000000000000000004
+:103CC00000000000000000000000000000000000F4
+:103CD000008B009000900094009400980000000079
+:103CE00000000000000000000000000000000000D4
+:103CF000000000000000000000000000009802DE4C
+:103D000002DE02E802E802F200000000000000000B
+:103D100000000000000000000000000000000000A3
+:103D20000000000000000000000000000000000093
+:103D30000000000000000000000000000000000083
+:103D40000000000000000000000000000000000073
+:103D50000000000000000000000000000000000063
+:103D60000000000000000000000000000000000053
+:103D70000000000000000000000000000000000043
+:103D80000000000000000000000000000000000033
+:103D90000000000000000000000000000000000023
+:103DA0000000000000000000000000000000000013
+:103DB0000000000000000000000000000000000003
+:103DC00000000000000000000000000000000000F3
+:103DD000000000000000000002F202FA00000000F3
+:103DE00000000000000000000000000000000000D3
+:103DF00000000000000000000000000000000000C3
+:103E000000000000000000000000000000000000B2
+:103E100000000000000000000000000000000000A2
+:103E20000000000000000000000000000000000092
+:103E300002FA02FF02FF030A030A03150000000052
+:103E40000000000000000000000000000000000072
+:103E50000000000000000000000000000000000062
+:103E60000000000000000000000000000000000052
+:103E70000000000000000000000000000000000042
+:103E80000000000000000000031503160000000001
+:103E90000000000000000000000000000000000022
+:103EA0000000000000000000000000000000000012
+:103EB000000000000316035700000000000000008F
+:103EC00000000000000000000000000000000000F2
+:103ED00000000000000000000000000000000000E2
+:103EE0000357037B000000000000000000000000FA
+:103EF00000000000000000000000000000000000C2
+:103F0000000000000000000000000000037B03BB75
+:103F100000000000000000000000000000000000A1
+:103F20000000000000000000000000000000000091
+:103F3000000000000000000003BB03F700000000C9
+:103F40000000000000000000000000000000000071
+:103F50000000000000000000000000000000000061
+:103F60000000000003F7043D043D045204520467BE
+:103F70000000000000000000000000000000000041
+:103F80000000000000000000000000000000000031
+:103F9000046704ED04ED04F204F204F700000000ED
+:103FA0000000000000000000000000000000000011
+:103FB00000000000000000000000000004F704F80A
+:103FC00000000000000000000000000000000000F1
+:103FD00000000000000000000000000000000000E1
+:103FE000000000000000000004F8050A00000000C6
+:103FF00000000000000000000000000000000000C1
+:1040000000000000000000000000000000000000B0
+:1040100000000000050A051F051F052205220525D1
+:104020000000000000000000000000000000000090
+:104030000000000000000000000000000000000080
+:1040400005250555000000000000000000000000EC
+:104050000000000000000000000000000000000060
+:10406000000000000000000000000000055505DC15
+:104070000000000000000000000000000000000040
+:104080000000000000000000000000000000000030
+:10409000000000000000000005DC05E305E305E783
+:1040A00005E705EB00000000000000000000000034
+:1040B0000000000000000000000000000000000000
+:1040C0000000000005EB062B062B06330633063BEB
+:1040D00000000000000000000000000000000000E0
+:1040E00000000000000000000000000000000000D0
+:1040F000063B068806880695069506A20000000085
+:1041000000000000000000000000000000000000AF
+:1041100000000000000000000000000006A206AE43
+:10412000000000000000000000000000000000008F
+:10413000000000000000000000000000000000007F
+:10414000000000000000000006AE06B40000000001
+:10415000000000000000000000000000000000005F
+:10416000000000000000000000000000000000004F
+:104170000000000006B406B70000000000000000C8
+:10418000000000000000000000000000000000002F
+:10419000000000000000000000000000000000001F
+:1041A00006B706BD0000000000000000000000008F
+:1041B00000000000000000000000000000000000FF
+:1041C00000000000000000000000000006BD06BE68
+:1041D00006BE06D006D006E2000000000000000087
+:1041E00000000000000000000000000000000000CF
+:1041F000000000000000000006E2074F0000000081
+:1042000000000000000000000000000000000000AE
+:10421000000000000000000000000000000000009E
+:1042200000000000074F0750075007630763077639
+:10423000000000000000000000000000000000007E
+:10424000000000000000000000000000000000006E
+:10425000000000000000000000000000000000005E
+:10426000000000000000000000000000000000004E
+:10427000000000000000000000000000000000003E
+:10428000000000000000000000000000000000002E
+:10429000000000000000000000000000000000001E
+:1042A000000000000000000000000000000000000E
+:1042B00000000000000000000000000000000000FE
+:1042C00000000000000000000000000000000000EE
+:1042D00000000000000000000000000000000000DE
+:1042E00000000000000000000000000000000000CE
+:1042F00000000000000000000000000000000000BE
+:1043000000000000000000000000000000000000AD
+:10431000000000000000000000000000000000009D
+:10432000000000000000000000000000000000008D
+:1043300000010000000204C00003098000040E40D8
+:1043400000051300000617C000071C80000821406C
+:1043500000092600000A2AC0000B2F80000C344000
+:10436000000D3900000E3DC0000F42800010474094
+:1043700000114C00001250C00013558000145A4028
+:1043800000155F00001663C00017688000186D40BC
+:1043900000197200001A76C0001B7B80001C804050
+:1043A000001D8500001E89C0001F8E800000934004
+:1043B00000002000000040000000600000008000BD
+:1043C0000000A0000000C0000000E00000010000AC
+:1043D0000001200000014000000160000001800099
+:1043E0000001A0000001C0000001E0000002000088
+:1043F0000002200000024000000260000002800075
+:104400000002A0000002C0000002E0000003000063
+:104410000003200000034000000360000003800050
+:104420000003A0000003C0000003E000000400003F
+:10443000000420000004400000046000000480002C
+:104440000004A0000004C0000004E000000500001B
+:104450000005200000054000000560000005800008
+:104460000005A0000005C0000005E00000060000F7
+:1044700000062000000640000006600000068000E4
+:104480000006A0000006C0000006E00000070000D3
+:1044900000072000000740000007600000078000C0
+:1044A0000007A0000007C0000007E00000080000AF
+:1044B000000820000008400000086000000880009C
+:1044C0000008A0000008C0000008E000000900008B
+:1044D0000009200000094000000960000009800078
+:1044E0000009A0000009C0000009E000000A000067
+:1044F000000A2000000A4000000A6000000A800054
+:10450000000AA000000AC000000AE000000B000042
+:10451000000B2000000B4000000B6000000B80002F
+:10452000000BA000000BC000000BE000000C00001E
+:10453000000C2000000C4000000C6000000C80000B
+:10454000000CA000000CC000000CE000000D0000FA
+:10455000000D2000000D4000000D6000000D8000E7
+:10456000000DA000000DC000000DE000000E0000D6
+:10457000000E2000000E4000000E6000000E8000C3
+:10458000000EA000000EC000000EE000000F0000B2
+:10459000000F2000000F4000000F6000000F80009F
+:1045A000000FA000000FC000000FE000001000008E
+:1045B000001020000010400000106000001080007B
+:1045C0000010A0000010C0000010E000001100006A
+:1045D0000011200000114000001160000011800057
+:1045E0000011A0000011C0000011E0000012000046
+:1045F0000012200000124000001260000012800033
+:104600000012A0000012C0000012E0000013000021
+:10461000001320000013400000136000001380000E
+:104620000013A0000013C0000013E00000140000FD
+:1046300000142000001440000014600000148000EA
+:104640000014A0000014C0000014E00000150000D9
+:1046500000152000001540000015600000158000C6
+:104660000015A0000015C0000015E00000160000B5
+:1046700000162000001640000016600000168000A2
+:104680000016A0000016C0000016E0000017000091
+:10469000001720000017400000176000001780007E
+:1046A0000017A0000017C0000017E000001800006D
+:1046B000001820000018400000186000001880005A
+:1046C0000018A0000018C0000018E0000019000049
+:1046D0000019200000194000001960000019800036
+:1046E0000019A0000019C0000019E000001A000025
+:1046F000001A2000001A4000001A6000001A800012
+:10470000001AA000001AC000001AE000001B000000
+:10471000001B2000001B4000001B6000001B8000ED
+:10472000001BA000001BC000001BE000001C0000DC
+:10473000001C2000001C4000001C6000001C8000C9
+:10474000001CA000001CC000001CE000001D0000B8
+:10475000001D2000001D4000001D6000001D8000A5
+:10476000001DA000001DC000001DE000001E000094
+:10477000001E2000001E4000001E6000001E800081
+:10478000001EA000001EC000001EE000001F000070
+:10479000001F2000001F4000001F6000001F80005D
+:1047A000001FA000001FC000001FE000002000004C
+:1047B0000020200000204000002060000020800039
+:1047C0000020A0000020C0000020E0000021000028
+:1047D0000021200000214000002160000021800015
+:1047E0000021A0000021C0000021E0000022000004
+:1047F00000222000002240000022600000228000F1
+:104800000022A0000022C0000022E00000230000DF
+:1048100000232000002340000023600000238000CC
+:104820000023A0000023C0000023E00000240000BB
+:1048300000242000002440000024600000248000A8
+:104840000024A0000024C0000024E0000025000097
+:104850000025200000254000002560000025800084
+:104860000025A0000025C0000025E0000026000073
+:104870000026200000264000002660000026800060
+:104880000026A0000026C0000026E000002700004F
+:10489000002720000027400000276000002780003C
+:1048A0000027A0000027C0000027E000002800002B
+:1048B0000028200000284000002860000028800018
+:1048C0000028A0000028C0000028E0000029000007
+:1048D00000292000002940000029600000298000F4
+:1048E0000029A0000029C0000029E000002A0000E3
+:1048F000002A2000002A4000002A6000002A8000D0
+:10490000002AA000002AC000002AE000002B0000BE
+:10491000002B2000002B4000002B6000002B8000AB
+:10492000002BA000002BC000002BE000002C00009A
+:10493000002C2000002C4000002C6000002C800087
+:10494000002CA000002CC000002CE000002D000076
+:10495000002D2000002D4000002D6000002D800063
+:10496000002DA000002DC000002DE000002E000052
+:10497000002E2000002E4000002E6000002E80003F
+:10498000002EA000002EC000002EE000002F00002E
+:10499000002F2000002F4000002F6000002F80001B
+:1049A000002FA000002FC000002FE000003000000A
+:1049B00000302000003040000030600000308000F7
+:1049C0000030A0000030C0000030E00000310000E6
+:1049D00000312000003140000031600000318000D3
+:1049E0000031A0000031C0000031E00000320000C2
+:1049F00000322000003240000032600000328000AF
+:104A00000032A0000032C0000032E000003300009D
+:104A1000003320000033400000336000003380008A
+:104A20000033A0000033C0000033E0000034000079
+:104A30000034200000344000003460000034800066
+:104A40000034A0000034C0000034E0000035000055
+:104A50000035200000354000003560000035800042
+:104A60000035A0000035C0000035E0000036000031
+:104A7000003620000036400000366000003680001E
+:104A80000036A0000036C0000036E000003700000D
+:104A900000372000003740000037600000378000FA
+:104AA0000037A0000037C0000037E00000380000E9
+:104AB00000382000003840000038600000388000D6
+:104AC0000038A0000038C0000038E00000390000C5
+:104AD00000392000003940000039600000398000B2
+:104AE0000039A0000039C0000039E000003A0000A1
+:104AF000003A2000003A4000003A6000003A80008E
+:104B0000003AA000003AC000003AE000003B00007C
+:104B1000003B2000003B4000003B6000003B800069
+:104B2000003BA000003BC000003BE000003C000058
+:104B3000003C2000003C4000003C6000003C800045
+:104B4000003CA000003CC000003CE000003D000034
+:104B5000003D2000003D4000003D6000003D800021
+:104B6000003DA000003DC000003DE000003E000010
+:104B7000003E2000003E4000003E6000003E8000FD
+:104B8000003EA000003EC000003EE000003F0000EC
+:104B9000003F2000003F4000003F6000003F8000D9
+:104BA000003FA000003FC000003FE000003FE001E8
+:104BB00000000000000001FF0000020000007FF87C
+:104BC00000007FF80000016A0000150000000001ED
+:104BD0000000FF00000000000000FF0000000000D7
+:104BE00000000000140AFF000000000100000000A7
+:104BF00000201001000000000100860000000100FC
+:104C00000000860200008604000086060000860878
+:104C10000000860A0000860C0000860E0000861048
+:104C20000000861200008614000086160000861818
+:104C30000000861A0000861C0000861E00008620E8
+:104C400000008622000086240000862600008628B8
+:104C50000000862A0000862C0000862E0000863088
+:104C60000000863200008634000086360000863858
+:104C70000000863A0000863C0000863E0000864028
+:104C800000008642000086440000864600008648F8
+:104C90000000864A0000864C0000864E00008650C8
+:104CA0000000865200008654000086560000865898
+:104CB0000000865A0000865C0000865E0000866068
+:104CC0000000866200008664000086660000866838
+:104CD0000000866A0000866C0000866E0000867008
+:104CE00000008672000086740000867600008678D8
+:104CF0000000867A0000867C0000867E00008680A8
+:104D00000000868200008684000086860000868877
+:104D10000000868A0000868C0000868E0000869047
+:104D20000000869200008694000086960000869817
+:104D30000000869A0000869C0000869E000086A0E7
+:104D4000000086A2000086A4000086A6000086A8B7
+:104D5000000086AA000086AC000086AE000086B087
+:104D6000000086B2000086B4000086B6000086B857
+:104D7000000086BA000086BC000086BE000086C027
+:104D8000000086C2000086C4000086C6000086C8F7
+:104D9000000086CA000086CC000086CE000086D0C7
+:104DA000000086D2000086D4000086D6000086D897
+:104DB000000086DA000086DC000086DE000086E067
+:104DC000000086E2000086E4000086E6000086E837
+:104DD000000086EA000086EC000086EE000086F007
+:104DE000000086F2000086F4000086F6000086F8D7
+:104DF000000086FA000086FC000086FE00008700A6
+:104E00000000870200008704000087060000870872
+:104E10000000870A0000870C0000870E0000871042
+:104E20000000871200008714000087160000871812
+:104E30000000871A0000871C0000871E00008720E2
+:104E400000008722000087240000872600008728B2
+:104E50000000872A0000872C0000872E0000873082
+:104E60000000873200008734000087360000873852
+:104E70000000873A0000873C0000873E0000874022
+:104E800000008742000087440000874600008748F2
+:104E90000000874A0000874C0000874E00008750C2
+:104EA0000000875200008754000087560000875892
+:104EB0000000875A0000875C0000875E0000876062
+:104EC0000000876200008764000087660000876832
+:104ED0000000876A0000876C0000876E0000877002
+:104EE00000008772000087740000877600008778D2
+:104EF0000000877A0000877C0000877E00008780A2
+:104F00000000878200008784000087860000878871
+:104F10000000878A0000878C0000878E0000879041
+:104F20000000879200008794000087960000879811
+:104F30000000879A0000879C0000879E000087A0E1
+:104F4000000087A2000087A4000087A6000087A8B1
+:104F5000000087AA000087AC000087AE000087B081
+:104F6000000087B2000087B4000087B6000087B851
+:104F7000000087BA000087BC000087BE000087C021
+:104F8000000087C2000087C4000087C6000087C8F1
+:104F9000000087CA000087CC000087CE000087D0C1
+:104FA000000087D2000087D4000087D6000087D891
+:104FB000000087DA000087DC000087DE000087E061
+:104FC000000087E2000087E4000087E6000087E831
+:104FD000000087EA000087EC000087EE000087F001
+:104FE000000087F2000087F4000087F6000087F8D1
+:104FF000000087FA000087FC000087FEFFFFFFFF2C
+:10500000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB0
+:10501000FFFFFFFFFFFFFFFFFFFFFFFF0000000399
+:1050200000BEBC20000000000000000500000003DE
+:1050300000BEBC20000000000000000500002000B1
+:10504000000040C000006180000082400000A3001A
+:105050000000C3C00000E4800001054000012600FC
+:10506000000146C000016780000188400001A900DE
+:105070000001C9C00001EA8000020B4000022C00C0
+:1050800000024CC000026D8000028E400002AF00A2
+:105090000002CFC00002F08000001140000080003C
+:1050A000000103800001870000020A8000028E00D8
+:1050B00000031180000395000004188000049C0088
+:1050C00000051F800005A300000626800006AA0038
+:1050D00000072D800007B100000834800008B800E8
+:1050E00000093B800009BF00000A4280000AC60098
+:1050F000000B4980000BCD00000C5080000CD40048
+:10510000000D578000005B0000007FF800007FF872
+:1051100000000166000015000000FF000000000014
+:105120000000FF0000000000000019000000000067
+:1051300000000000FFFFFFFF00007FF800007FF885
+:1051400000000361000015000000FF000FFFFFFFDB
+:105150000000FF000FFFFFFF000000FF0000FF0046
+:105160000FFFFFFF0000FF000FFFFFFF000000FF29
+:105170000000FF000FFFFFFF0000FF000FFFFFFF19
+:10518000000000FF0000FF000FFFFFFF0000FF0016
+:105190000FFFFFFF000000FF0000FF000FFFFFFFF9
+:1051A0000000FF000FFFFFFF000000FF0000FF00F6
+:1051B0000FFFFFFF0000FF000FFFFFFF000000FFD9
+:1051C0000000FF000FFFFFFF0000FF000FFFFFFFC9
+:1051D000000000FF0000FF000FFFFFFF0000FF00C6
+:1051E0000FFFFFFF000000FF0000FF000FFFFFFFA9
+:1051F0000000FF000FFFFFFF000000FF0000FF00A6
+:105200000FFFFFFF0000FF000FFFFFFF000000FF88
+:105210000000FF000FFFFFFF0000FF000FFFFFFF78
+:10522000000000FF0000FF000FFFFFFF0000FF0075
+:105230000FFFFFFF000000FF0000FF000FFFFFFF58
+:105240000000FF000FFFFFFF000000FF0000FF0055
+:105250000FFFFFFF0000FF000FFFFFFF000000FF38
+:105260000000FF000FFFFFFF0000FF000FFFFFFF28
+:10527000000000FF0000FF000FFFFFFF0000FF0025
+:105280000FFFFFFF000000FF0000FF000FFFFFFF08
+:105290000000FF000FFFFFFF000000FF0000FF0005
+:1052A0000FFFFFFF0000FF000FFFFFFF000000FFE8
+:1052B0000000FF000FFFFFFF0000FF000FFFFFFFD8
+:1052C000000000FF0000FF000FFFFFFF0000FF00D5
+:1052D0000FFFFFFF000000FF0000FF000FFFFFFFB8
+:1052E0000000FF000FFFFFFF000000FF0000FF00B5
+:1052F0000FFFFFFF0000FF000FFFFFFF000000FF98
+:105300000000FF000FFFFFFF0000FF000FFFFFFF87
+:10531000000000FF0000FF000FFFFFFF0000FF0084
+:105320000FFFFFFF000000FF0000FF000FFFFFFF67
+:105330000000FF000FFFFFFF000000FF0000FF0064
+:105340000FFFFFFF0000FF000FFFFFFF000000FF47
+:105350000000FF000FFFFFFF0000FF000FFFFFFF37
+:10536000000000FF0000FF000FFFFFFF0000FF0034
+:105370000FFFFFFF000000FF0000FF000FFFFFFF17
+:105380000000FF000FFFFFFF000000FF0000FF0014
+:105390000FFFFFFF0000FF000FFFFFFF000000FFF7
+:1053A0000000FF000FFFFFFF0000FF000FFFFFFFE7
+:1053B000000000FF0000FF000FFFFFFF0000FF00E4
+:1053C0000FFFFFFF000000FF000000FF000000FFD4
+:1053D0000000FF00000000000000FF0000000000CF
+:1053E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:1053F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
+:1054000000001000000020800000310000004180FA
+:1054100000005200000062800000730000008380E2
+:10542000000094000000A4800000B5000000C580CA
+:105430000000D6000000E6800000F70000010780B1
+:105440000001180000012880000139000001498096
+:1054500000015A0000016A8000017B0000018B807E
+:1054600000019C000001AC800001BD000001CD8066
+:105470000001DE000001EE8000000F0000000000CF
+:1054800000007FF800007FF80000021D00001500FA
+:1054900010000000000028AD00010001FFFFFFFF29
+:1054A000FFFFFFFF00050206CCCCCCC17058103CBA
+:1054B000000000000000FF00000000000000FF00EE
+:1054C000000000000000000000000001CCCC020140
+:1054D000CCCCCCCCCCCC0201CCCCCCCC00000000D1
+:1054E000FFFFFFFF0000FFFF000000000000FFFFC4
+:1054F000000000000000FFFF000000000000FFFFB0
+:10550000000000000000FFFF000000000000FFFF9F
+:10551000000000000000FFFF000000000000FFFF8F
+:1055200000000000000E0000011600D60000FFFF82
+:10553000000000000000FFFF000000000000FFFF6F
+:10554000000000000000FFFF000000000000FFFF5F
+:10555000000000000000FFFF000000000000FFFF4F
+:10556000000000000000FFFF0000000000720000CB
+:10557000012300F3FFFFFFF3318FFFFF0C30C30C5B
+:10558000C30C30C3CF3CF300F3CF3CF30000CF3C5F
+:10559000CDCDCDCDFFFFFFF130EFFFFF0C30C30CC1
+:1055A000C30C30C3CF3CF300F3CF3CF30001CF3C3E
+:1055B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2C
+:1055C000C30C30C3CF3CF300F3CF3CF30002CF3C1D
+:1055D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C2
+:1055E000C30C30C3CF300014F3CF3CF30004CF3CE6
+:1055F000CDCDCDCDFFFFFFF2304FFFFF0C30C30C00
+:10560000C30C30C3CF3CF300F3CF3CF30008CF3CD6
+:10561000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF7
+:10562000C30C30C3CF3CF300F3CF3CF30010CF3CAE
+:10563000CDCDCDCDFFFFFFF731EFFFFF0C30C30C19
+:10564000C30C30C3CF3CF300F3CF3CF30020CF3C7E
+:10565000CDCDCDCDFFFFFFF5302FFFFF0C30C30CBC
+:10566000C30C30C3CF3CF300F3CF3CF30040CF3C3E
+:10567000CDCDCDCDFFFFFFF3318FFFFF0C30C30C3D
+:10568000C30C30C3CF3CF300F3CF3CF30000CF3C5E
+:10569000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9F
+:1056A000C30C30C3CF3CF300F3CF3CF30001CF3C3D
+:1056B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C2B
+:1056C000C30C30C3CF3CF300F3CF3CF30002CF3C1C
+:1056D000CDCDCDCDFFFFF4061CBFFFFF0C30C305C1
+:1056E000C30C30C3CF300014F3CF3CF30004CF3CE5
+:1056F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFF
+:10570000C30C30C3CF3CF300F3CF3CF30008CF3CD5
+:10571000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF6
+:10572000C30C30C3CF3CF300F3CF3CF30010CF3CAD
+:10573000CDCDCDCDFFFFFFF730EFFFFF0C30C30C19
+:10574000C30C30C3CF3CF300F3CF3CF30020CF3C7D
+:10575000CDCDCDCDFFFFFFF5304FFFFF0C30C30C9B
+:10576000C30C30C3CF3CF300F3CF3CF30040CF3C3D
+:10577000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CF1
+:10578000C30C30C3CF3CF3CCF3CF3CF30000CF3C91
+:10579000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CD1
+:1057A000C30C30C3CF3CF3CCF3CF3CF30001CF3C70
+:1057B000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CB1
+:1057C000C30C30C3CF3CF3CCF3CF3CF30002CF3C4F
+:1057D000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C91
+:1057E000C30C30C3CF3CF3CCF3CF3CF30004CF3C2D
+:1057F000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C71
+:10580000C30C30C3CF3CF3CCF3CF3CF30008CF3C08
+:10581000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C50
+:10582000C30C30C3CF3CF3CCF3CF3CF30010CF3CE0
+:10583000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C30
+:10584000C30C30C3CF3CF3CCF3CF3CF30020CF3CB0
+:10585000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C10
+:10586000C30C30C3CF3CF3CCF3CF3CF30040CF3C70
+:10587000CDCDCDCDFFFFFFF3320FFFFF0C30C30CBA
+:10588000C30C30C3CF3CF300F3CF3CF30000CF3C5C
+:10589000CDCDCDCDFFFFFFF1310FFFFF0C30C30C9D
+:1058A000C30C30C3CF3CF300F3CF3CF30001CF3C3B
+:1058B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C29
+:1058C000C30C30C3CF3CF300F3CF3CF30002CF3C1A
+:1058D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BF
+:1058E000C30C30C3CF300014F3CF3CF30004CF3CE3
+:1058F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFD
+:10590000C30C30C3CF3CF300F3CF3CF30008CF3CD3
+:10591000CDCDCDCDFFFFFF8A042FFFFF0C30C30C90
+:10592000C30C30C3CF3CC000F3CF3CF30010CF3CDE
+:10593000CDCDCDCDFFFFFF9705CFFFFF0C30C30CC2
+:10594000C30C30C3CF3CC000F3CF3CF30020CF3CAE
+:10595000CDCDCDCDFFFFFFF5310FFFFF0C30C30CD8
+:10596000C30C30C3CF3CF300F3CF3CF30040CF3C3B
+:10597000CDCDCDCDFFFFFFF3300FFFFF0C30C30CBB
+:10598000C30C30C3CF3CF300F3CF3CF30000CF3C5B
+:10599000CDCDCDCDFFFFFFF1300FFFFF0C30C30C9D
+:1059A000C30C30C3CF3CF300F3CF3CF30001CF3C3A
+:1059B000CDCDCDCDFFFFFFF6305FFFFF0C30C30C28
+:1059C000C30C30C3CF3CF300F3CF3CF30002CF3C19
+:1059D000CDCDCDCDFFFFF4061CBFFFFF0C30C305BE
+:1059E000C30C30C3CF300014F3CF3CF30004CF3CE2
+:1059F000CDCDCDCDFFFFFFF2304FFFFF0C30C30CFC
+:105A0000C30C30C3CF3CF300F3CF3CF30008CF3CD2
+:105A1000CDCDCDCDFFFFFFFA302FFFFF0C30C30CF3
+:105A2000C30C30C3CF3CF300F3CF3CF30010CF3CAA
+:105A3000CDCDCDCDFFFFFF97040FFFFF0C30C30C82
+:105A4000C30C30C3CF3CC000F3CF3CF30020CF3CAD
+:105A5000CDCDCDCDFFFFFFF5300FFFFF0C30C30CD8
+:105A6000C30C30C3CF3CF300F3CF3CF30040CF3C3A
+:105A7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEE
+:105A8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8E
+:105A9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCE
+:105AA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6D
+:105AB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAE
+:105AC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4C
+:105AD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8E
+:105AE000C30C30C3CF3CF3CCF3CF3CF30004CF3C2A
+:105AF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6E
+:105B0000C30C30C3CF3CF3CCF3CF3CF30008CF3C05
+:105B1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4D
+:105B2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDD
+:105B3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2D
+:105B4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAD
+:105B5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0D
+:105B6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6D
+:105B7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CED
+:105B8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8D
+:105B9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCD
+:105BA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6C
+:105BB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAD
+:105BC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4B
+:105BD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8D
+:105BE000C30C30C3CF3CF3CCF3CF3CF30004CF3C29
+:105BF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6D
+:105C0000C30C30C3CF3CF3CCF3CF3CF30008CF3C04
+:105C1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4C
+:105C2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDC
+:105C3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2C
+:105C4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAC
+:105C5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0C
+:105C6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6C
+:105C7000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CEC
+:105C8000C30C30C3CF3CF3CCF3CF3CF30000CF3C8C
+:105C9000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CCC
+:105CA000C30C30C3CF3CF3CCF3CF3CF30001CF3C6B
+:105CB000CDCDCDCDFFFFFFFF30CFFFFF0C30C30CAC
+:105CC000C30C30C3CF3CF3CCF3CF3CF30002CF3C4A
+:105CD000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C8C
+:105CE000C30C30C3CF3CF3CCF3CF3CF30004CF3C28
+:105CF000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C6C
+:105D0000C30C30C3CF3CF3CCF3CF3CF30008CF3C03
+:105D1000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C4B
+:105D2000C30C30C3CF3CF3CCF3CF3CF30010CF3CDB
+:105D3000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C2B
+:105D4000C30C30C3CF3CF3CCF3CF3CF30020CF3CAB
+:105D5000CDCDCDCDFFFFFFFF30CFFFFF0C30C30C0B
+:105D6000C30C30C3CF3CF3CCF3CF3CF30040CF3C6B
+:105D7000CDCDCDCD000C0000000700C00002813069
+:105D8000000B81580002021000010230000F024097
+:105D900000010330000C0000000800C00002814038
+:105DA000000B81680002022000010240000702503F
+:105DB000000202C000100000000801000002818003
+:105DC000000B81A80002026000018280000E829810
+:105DD0000008038000028000000B8028000200E021
+:105DE000000101000000811000000118CCCCCCCCD7
+:105DF000CCCCCCCCCCCCCCCCCCCCCCCC00002000F3
+:105E0000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCD2
+:105E100000002000CCCCCCCCCCCCCCCCCCCCCCCCD2
+:105E2000CCCCCCCC00002000000000000000000022
+:105E30001F8B080000000000000BFB51CFC0F003D7
+:105E40008ABB5819180238107C7AE0A58C94E9DFD7
+:105E5000C8CCC0B00388AF02F17E66D2F5B34A2346
+:105E6000D8F7241818182419184E893130EC9244A8
+:105E700088E702D5084A3130DC858A0500D967A554
+:105E8000E81B4EA39836F8BB3A2AFF912A84CE87A6
+:105E900089A3C93F86CA6F5480D03FD5B19BBB0947
+:105EA0002A0F00FE694F6760030000000000000039
+:105EB0001F8B080000000000000BED7D0B7854D50F
+:105EC000B9E8DACFD933994C7642422610700703ED
+:105ED000040D30208FA85427E1D1E0E5E8F0462EEC
+:105EE000CA80AF0892448D356D39373B6412020287
+:105EF0008ECAA1B4A53A207AA247DBD4464B7BF5E3
+:105F0000DC206A73DAD37B9152A52DB6413D281669
+:105F100068F49403BDD796BBFE7FAD3DD97B672661
+:105F20000F5FDF395F1B3EDD597BAFBDD6BFFEF78C
+:105F3000FAFF7FEDA8A242D44B08B9083FD712B2AE
+:105F40004E2084E4F55EADFB448B56935C42AA82FE
+:105F5000AAB1953E5B2F858DC669F4FE2562E809DE
+:105F600002F7C7CD21930851E0BD0242A6C2FFA6A9
+:105F70001322E7B40E8FFAE93D6955165CADF1AC1A
+:105F80006B954C883E159E6F1B97EA7972FE84D202
+:105F9000D3AD11FCB9388690FAE337CE7FC56AD30A
+:105FA000FF4692CCDC9397D35F6692991725423EC9
+:105FB0002A5C94D569A41FEF83862E5D1E4BC8F919
+:105FC0008615F35F19DBF7F97A89D4B697F6BD7FAA
+:105FD00015D1102F4433D5C8C4DE75AF27A4D39391
+:105FE00043C8E6C24D6CBDB9145957D2FB6DFFA230
+:105FF000CB25BD70AE9769BFA97DD7438889E35A89
+:10600000E324DF4F7439DE77BF971C8FBF4F64FAEC
+:106010006F0621D885AE7FBA10BD16EE7B0A1799A0
+:1060200023687BFD33E5245A9A1EFE24BD3E21FCE5
+:10603000D67B69E9C8FB7DB4BFA985D0F74EAAF12C
+:10604000EBAFA27CF4DEF7A5D026E0A33DE3E7901A
+:1060500000BD4F181F59743AB5BF69782AFE4847EA
+:10606000A7BF275EE43F8BBFAAC455599DE493F3B5
+:10607000D71DC05F1936FE6A5FDCEF789F94BF6260
+:106080006EFEE2F838DDCED64F760F6374E1F4721F
+:10609000D3272D5D3EE97B7DF9690BE0D5D3BED8D2
+:1060A0001C4152F01387D7A2D7A78577203E222420
+:1060B0008E74262422C1FCBDF7D935A3CC1080CF25
+:1060C00068F330AC23C8A622C15B5BEE16299C01A5
+:1060D00092681D5744DBDD6B1600DC81E3F34F81D2
+:1060E0003C34872AB4D974BDFA34E3A179F49A51C7
+:1060F000AA0BB09EAD44042540C7AB36CB4B815EA6
+:1061000004DB4F9BB7844DC0030913329C90FBF80E
+:106110009A08110D99B655F8754CAA75A8A493E183
+:1061200043B8E8E9FB7EBAF5ABBDEF918B45F0FFD4
+:106130007B08AC6FA0F74894BD67D27F80EF1CD777
+:1061400038FA1CDAB6F17D80D8DAF4F951F805F1A5
+:106150007DF717325F36D9A719543FA825A29E8034
+:10616000FEC4C896693BA3922A22781E24072945BB
+:1061700006A44B332195EDC08FA49D2C9CD80BDF3A
+:106180002922E07A0A6EDFB9A685AAAE7365FE10F1
+:10619000F079502764584EDFF56C6BA08C3CDED64E
+:1061A0000E3D87FC1FA37C3486BE6F86983DDC5A6B
+:1061B000F2B21EB5C977862070BE74F30731E419B8
+:1061C0002066C02AF45A2286BD814FCF1FB20B8FA2
+:1061D00083E50F7FD4461F32747A05B9DF3058FE4D
+:1061E000F8B4F35974ED2B578D165D3542E9B0A51F
+:1061F00078514AFF233D5DF711E89F5142C289144F
+:10620000EF8D12042E07A643DFE095D2474A92F79E
+:106210005E07BDA4FC192BF6F6830F29D7890F6BF7
+:106220005C6FBD64BC4B5522917511C653613CCA6D
+:10623000A75B820F9B84CAC339E06D8A0F293EA5F4
+:1062400013DAA498201FD29F4E81B6BDC170622B75
+:10625000F24102E962C1E73144077EE55C9FA34D4C
+:106260005698821D7E6FBD8A70A8E823D071743A5B
+:10627000204585EC279DC0B716BF021B5CBC14DA15
+:106280005F77F041AB3195A4A283C5AF8056C6AF0E
+:106290005F1F9C7E71CFB7C409EFA0DFF3CBC64967
+:1062A0009B1D4AFF9E4C4E5AF4A148AC82016C7C67
+:1062B000B059210784C98434152E23517A77333C91
+:1062C000A276AC05AE05E01F4E45BD40DA0419E0EC
+:1062D000B4EC2A09E660BFE98281E3895A2DEA1508
+:1062E000C91F66F6953F4F0F179B7FB8110FEB1430
+:1062F000BFF9241E16297DA8AE0C7512D09B610231
+:106300007C40428C2F24EEA75BEFC7383F7BC951FE
+:106310007C9F6A5753477BE694E3B9127D48C7D9FF
+:106320005242121EA4535C83B65C2213D81750FD50
+:10633000E42FA0FDB32CF697168400FE2C6E5FC9E7
+:106340002CCEDF02D56714CFFE694EF9F6B9E45FB3
+:10635000E6F6B88F3E4BB39FB0AE6EFFED3181FBDA
+:106360006F19C48FF4E6EF137F6A7FD5F2DB2CBC84
+:10637000E68904F1497EAA249E28E26BA3ED7BDE28
+:10638000CA4EC0BACD8AC89A668A07F36D21D40472
+:10639000F494C33D59F4F9C92725DC2FE52DABBF93
+:1063A00004E6DBDE608E2DB6F983DBE55A0DF04D99
+:1063B000F942B3DB8B1B48F405C1B6FFF2045BC6A0
+:1063C000160F43FE7BBBBB044C8580FCE7F5C78200
+:1063D000AF825CF2FB49FCD8DB52DF766E3EE1F621
+:1063E000F286F2309DB71574D7087C6C0A149ED6DD
+:1063F00002D6FE49E3F072B09FAD99ACFD51E33B8C
+:10640000E146E48BA816A1F7EA09C74B17C50BD2E2
+:10641000DFC8B7DB57F7D5BDFE1DB2EE033EDBEBA1
+:10642000CFB9AE04EC67991802B4EF8D1DD1D7D85F
+:10643000F0F14D4FC51B808F91242110A05F2C17C8
+:10644000E5C7F2E780F1A05DC0E5A9901CC67EA378
+:10645000233DE50ADC5AA1BF0CD796E073D9284F3B
+:10646000648E7E12E55F122E5E3E78794FB7DE8035
+:106470004022A9FCF9FBA51C94ABC034BA6E875E20
+:106480002FD4911FF9B85F031A81FEC8A6304D06BC
+:106490003D125F114931DE4F0411FB69600FAEA060
+:1064A00068285C56F66F74BD9A169EF22A85CB93C7
+:1064B000EB0F990836B3130697014FBC5103FC92BA
+:1064C000A31201F9D70AC391DB804F49242CD0FBDA
+:1064D0005A301CDA6AF45D9F4A987DC8A1D78B4C6C
+:1064E000BE09F4BF274FC7FE04EC85B5AE31009757
+:1064F0008A707D06F4CE15A70F4CE711A4BD1C8C45
+:10650000593A7A7FD6744EF7BE9BBE0181C9D7FD3A
+:106510004DE7C32695A796E3822881528C17235D09
+:10652000344E97F34A5403BF71CB5745B28FB61F11
+:10653000ADEFDF4F89819FE2B1D94D9DD16FE45D11
+:10654000FA5460A174EFEDBA4BAC4CA4E0A74A91A9
+:10655000E9FD2D773D1C1F0BF47CC5B9DF53568533
+:10656000D12FA5FBBE4AA087F59EB798D927B29F29
+:10657000AE87F657B83F723E6F511649318F75DDC1
+:10658000E382BF90E23995DCDC2771FF6A271BDFCD
+:10659000F277CE17F43FBE859F0B9522395C8A6453
+:1065A000F59152BE188AF7C2A4DF9D876D0F7F94C4
+:1065B000A8157D04EC5E6167395C15D2D3087CBAFE
+:1065C0004B2455A9E05B2B89085F61986E3DA8DEDE
+:1065D0002F3445D04CE45EC9C0FBF9AB6A0F2A9456
+:1065E0002EADA34808CCCC25301EE8D5835EB49FE1
+:1065F0006A2E4978A99E7EADE82B26D865BD908489
+:106600000116BD16F69CF43F6A5F0DFA5CD9183589
+:1066100011AE6004F708878A9621BD5BA87FE76109
+:106620000B71F0538B297602DFC6E9F8E00FC68DB7
+:106630000A94D773416AF9E1E7630ABFB5DFB8147A
+:10664000E242949400E70419E1A423317AEA0C2F82
+:106650002377CF229DD4EEB466EF427930AF242861
+:10666000AF32396C0A6067E48429527863554C1F55
+:1066700028B971C16EC7F690E88376BE91F54EF4E5
+:10668000FF5AFF2CAD4885D76A91E9B7FBB83E3C6D
+:10669000AFB4CF477FA399CA4751DFFE614E876FE2
+:1066A000C7163D381EF519B34BD6F32EC170C43151
+:1066B000475E50713D6EBF661EF76B5A0AA95F8335
+:1066C000F24E16801F93C1F9A305B0479F7BB249D4
+:1066D000C2A47064803F43FD1252CAFC128DFE03B7
+:1066E000FD97BFC2E9CF785C7E4B3A7FE66B42E410
+:1066F00007A8EFA8AA02F8770BF1F9E300DF057409
+:106700003F69F45D7717DF4FCE95B615B550B81ECB
+:10671000CB151DFC309ACBCB63C43C71913E8F17D7
+:106720008A06C01DAF17711DE70CE6B79377BD0E43
+:106730003BD16C2ED2884DFFECE0F2B4AD4173C872
+:10674000ADFBEA57E3D1480ABDA573FA64CC0A63EE
+:10675000FCC31F4A20FD619DA9FCF4074A2BB4FE2F
+:10676000F49F5CA2AE41FC15569C92E15AE6DE2FE6
+:10677000A51ED77D25763F534ADF6FB0D72D144F26
+:106780006F2B0E7FBC53827D9749D0FFF386A8A95B
+:106790000AC0551F0EF07B4354DCE0DA5D5E09F75A
+:1067A0008D59110DE4C8B2CFDE50642BDCCFFA92C4
+:1067B000BC05E8E52D174589D24F934D9263939B15
+:1067C000A970D3C6DF99545DDAF1A145BF52097EA5
+:1067D0002A2914C9580AC7E68F1B343B9DBAE836EC
+:1067E00084ED5B9D7C13AFEF5FCF7E5ABEF8B96836
+:1067F000C5439CF4C21F7B3C84D33949FF3E718D55
+:10680000FF1CF4D638FD0C4ABF4D06D093E90BBAF5
+:10681000F142FF21AE996168C70D43346D7AEC6394
+:106820003107F1205F90512FED5ED312067AE974A3
+:106830000C202DBD8653D9ED2E4145B9A27AE32A0D
+:10684000693A2A6401E29F73A58D48EFC728BD41CC
+:106850008F3D466ABB2EE6F6CABF1655D18FEF6A4A
+:1068600034CB1B8B87A237297CD4AF237B98FF7254
+:1068700089E5BFFC3DE59341F82BE7A9D1E0F6D8C7
+:106880000B7C25775396A670156E6476137CB51C29
+:10689000DA36A8DDEB147AF9D1C3E7514A1387C77A
+:1068A00023BD9DF6E9B1C297050FD8B76266DF54E4
+:1068B000B3330C7A26504CED1341FBB31AF033A2DC
+:1068C000245E0EED91BBE7E13ABE0D7EA81FEC0BF6
+:1068D000417C7C534C349A9466BE70A4539460FF00
+:1068E0004C707F67D1CF3D2FB57A484F5FB6B81750
+:1068F000E814A83D0CCBB4DBBD6A29AFD71E8E28A7
+:10690000E94475EBF617D2FA097F96F87E6C666358
+:1069100098B647C1AFD49FDC293EDE08FBB188277B
+:106920005C8F7477ED239271281EEF5E5B6609958C
+:10693000B1FC37749E3BBB140A00013F40B2C781D3
+:10694000EE04BB44F5CD5A6ED76E2591003C3C4316
+:10695000448CAF9D21470257D8F870A7A4B2795A4A
+:1069600095B7217E6FC5776F8BB3B6A57FEED8ED57
+:106970006CDF4E160D87F8EDED3B155CFF9DAE7D8F
+:106980006B4CD271DC3B486D0BE0A15921E827AC80
+:10699000D5890CF1D80D3FFCCE0CD8277C9BDB951C
+:1069A0000F287F1936FDB3CE9F50613FFB4EC715B0
+:1069B000CBAE26F07EA26504ECCBB3494A3B7A4BC2
+:1069C000AB13BE81E077C34BC8A67EE190DB849415
+:1069D000F1C3A724C11137ACD70293206872DECB74
+:1069E000AE6605D31FE66FBD8926F0132583F7AF8A
+:1069F0009DCCF21CB533E13AD07B3FE3FEE850DF9B
+:106A00003B9CE6BD0D5AB70AFC5F239B9582D81BC1
+:106A1000AFD294DAF04890E303E59D2389A35FEBBE
+:106A200020FB558AFDF473C37B4AD74C71725FB863
+:106A30006F20D1B740EECE8BD16A8C1370B83D80F9
+:106A40006709AE32D213E3274530AFBF55C882384D
+:106A50004A07FA275E4376D0BBC6D203542F41DCE7
+:106A600027A3C4F9DC1D57E949D2B513E50B43A2AE
+:106A7000744901CDDF2981BF58269F4EF6A7F355F3
+:106A8000C3BA266327D42F755CBF5413E3C159D30F
+:106A900050BE305E57377F8C0970D4E51921D30082
+:106AA000351A0AE3182EBEAAB92090846DFF5D2323
+:106AB000F7A8204735547FDBEFDF1364F1E4747AE5
+:106AC0005B219AE12F01BF56443C493A6DDBD6FD6C
+:106AD000515CA86C67FBAAAC25FDEC8BEF09B27882
+:106AE000F1DA2D63B358DCC5A9AFCE72FBF0936722
+:106AF0001E57BB41CF3C7DE27A58E7FAFF29118D42
+:106B0000CE7BF6994CD2897623A182DD58D721A578
+:106B1000B4878434B1FCF9F732915EEB9EF324160E
+:106B2000D0F7D7BDF0CE2442E13BBBA9E7B591E059
+:106B30004F3F2DB0B8B8D93D6931BDBF4E26AB53DC
+:106B4000C55926C86C1F72FA47192B407E85B6833B
+:106B500037E3B8EDCB15B0AB563F4356905F693F76
+:106B6000B4DBE6534262AC900A3E968F38FD94C087
+:106B7000E03BA0E0FE6F5DDB5E354AE1A869FB10FB
+:106B8000F5C5ECEF3D1B003CD41C901C7E5C4D9B7E
+:106B9000D4E99984D713708538AB3003F884F34B6C
+:106BA000C7068CAF56B73FF0A11480F79D7A8BE2F1
+:106BB00025D409787D530A2D80F60FFE316050549C
+:106BC0007D70F88900E0958EBB46CD8238BE93BFBC
+:106BD00061FC0B397DC7A39C8EF9DE9AF62D6C3EC5
+:106BE000975EFC007E29E81B878DC8CE3C3A691B66
+:106BF0005C9E77FDB3E71E35E97CA79FFBFDA326CE
+:106C000085FBAEBFFCFBA35F07B9FC67AF0E7ABD87
+:106C1000E6E95F06888D0FD7C92C7E707614DD42B9
+:106C2000D17E677FE549804370F6A5F7461B74BDAA
+:106C300067BFFFA7E106ED5FF7D2DC7C587FDDF38D
+:106C4000B3F3FBF363804F131E3B5C091CDF38205A
+:106C50003067E1457E75D1E550C7A1D100E7996362
+:106C60001EDC9FD5D07BF553814E1BD0CE427B23BB
+:106C7000C56FF5339B3F04FDD017CFE64811835F06
+:106C8000540D0681CEEFCC437A911EB48FEEFE35C3
+:106C900047291D27A7A7DB39F2B10A7AAEE6992D5D
+:106CA0006C3E17DDCEC02F57F6A5DB6617DDCE9103
+:106CB000BB1E2B80C46BC730471EC1BAF6C6CF239C
+:106CC00059917EF48325FF03E115F32C14AEA572D0
+:106CD000F81B32C8D1731949BA2E00BA3E7B6E3404
+:106CE000A17CF1BED27333D8839E973CFA3E7A7F63
+:106CF000DD4B6FA25C9D7DFE75D5403B46FC02F5E9
+:106D00002BCF92E4CF61F033AB99CF496AF6677627
+:106D10007A02BDF4A94E2CAC340278FF04DE4F3069
+:106D20007EAF4E1C5C22A4A0D7EBF218A6FF13790D
+:106D300088970DFB7FA312BF938E4219D0F1C43CFC
+:106D4000B89F8E8ED6FA7558FF4C1B3DF7333975B8
+:106D5000F7AFA6F208F62E49D784F02649219767A7
+:106D6000F77A64B07767C1AF4A993765FECC50F3C4
+:106D70002B3F939DF557C9FC0AC7437AFE60F23D4D
+:106D8000D0FA868ABF1FC9068EEBC6E3E98F53EBA4
+:106D9000FBF7B8BEA82666E5884BFBFA2132899836
+:106DA000238B7AE13D0D1B54CA7FA79F96301ED4DA
+:106DB000D27E08F5B65B4F54A7896F5E90999F50BD
+:106DC0007DE0E024D067A75FFE11F267F53327541A
+:106DD0008817BFD6F603B5BBB4571EC01E246CF689
+:106DE000E0F4770F4E627A808E9F824E8AC2C6AFE1
+:106DF00079D1397ECD331F3AC65F6FB6A37F30D0CD
+:106E00003C1FC8E1E5B0DE0F0E2B04F4E807ED529D
+:106E1000652ABFF6036E0F2D3CB5BC3EEF379007D9
+:106E20009B76C46780DDECD814CEDF0EFEDA1185C8
+:106E300080DE2672F8F71EDAEE78DD67407EBAE370
+:106E4000C832C9B0ED437FE8C2E7CCA3E6EC4C3AC8
+:106E5000DECCEEC8347051DD7AA3EC38DD57D9F8BA
+:106E6000A0EEF5CA7CD0F7B00F35C6C37CA120ECEC
+:106E700073A5C0BC4A96BF16756F4A7BCDC653FC3E
+:106E8000118C5729BA988C91C1B82349A211E2AB51
+:106E9000C4EF77E727229A3D0FB5E2F041D862E6CA
+:106EA0002E7EB100C60990987E12FD4F12BAD88F7F
+:106EB000FFE5CE4758F84CCA5F9AFC44867E73F0D3
+:106EC00020E93B5EDF3C4C5483F8768B7F6D6B9101
+:106ED0002D0FD312EC938799AB503CB40A2465BCB8
+:106EE00076BC52315FC9C3DD7134D5F39B1426578C
+:106EF000D792EE7BD7009C1196CF99E5C2D79738F1
+:106F0000BEFE79325D3855A1E5E05951FCCE5E12E6
+:106F10008E29F4FEDC553D97BF8CDD793EC71C2FD2
+:106F20005ECC183CFE869AB78B7816DDAE0C226FCD
+:106F3000972E7FDC0B87C9F7E3398E3CC6A1B7EEED
+:106F4000D7BA31CF50DB5A648BFB0DEFF49230E6A9
+:106F5000F10CF40F8777DEF9CDDB20EE9C5B18F2A5
+:106F600092BEE3C817AEC6B89195CF970BC39D10DC
+:106F7000EF9775A35CC279968721BFB0D960F9827B
+:106F8000CDC1FEE37A339468B382F1A86B705C5193
+:106F9000E3F507835CE737160710CF018A67907720
+:106FA000DCFFC0FA8E0B3C6FDE6D4A903F3C918D4A
+:106FB000F982804C4A201E705EF08536613EC19990
+:106FC000374FC7BFDB6513F3E6AD469FBCF97714B7
+:106FD0005BBE414B9337D7FC4B306FAE119BBF5B11
+:106FE000D4DBAF57EE5C7973180BE332DB67435C9D
+:106FF000A6399B38F2E6CD20F85711F29C72F56C59
+:10700000AC3BF3F2E7E6ACD9617B9B1C7F19DB3C20
+:10701000FEF4C7E6739BA07FEE48528B756A7284BC
+:107020002CB5E9C1F71416A7DDA0847FA8D8EB8E94
+:10703000383F58F99F436FBD877C05D73114AFCDDA
+:1070400094AF3CC857A7885DAF5A578B7F9A8DFE87
+:10705000F942BD3005E366C976D044BE0804A3E119
+:10706000708AF7267998DC5BF306CAA81EA5F2A6FB
+:107070001811CC47A93ADDF01A83873F1D5C169F93
+:10708000361B63581D944EB07E2FFD3AA6B13826AC
+:1070900044B8285CBB6EBC3DD49F9F63AD73861221
+:1070A0003E69C77BEE25A9EB77AB55B6EEE6C82A5D
+:1070B000965FAF72E653217D6D8FB34E17A2FFAE80
+:1070C000609C90E553452DC2F323A6151F0F26E3C0
+:1070D000E106D419DE65823E5456B59B025C7359B5
+:1070E0003E25578B7EACD8EC83AC7733B975E5077A
+:1070F000E74AA787845FAB2E6E6B838E7EFA9686F7
+:1071000020B6373718786D6908E37D371D9B8D975A
+:1071100083B7605D9A0FE3B2E9C67FB02184E3C410
+:107120001ACAD8783C6F4E486613F0952A5AF23244
+:107130000CDB7E893F370B9A40FEB60BECF9352D00
+:1071400097A2BC59FCB3C3E83F2E2D2566201F0C27
+:1071500075FCBEFCFA135C67F32C3FEAD781E42888
+:10716000AB93CD3BD87994A4BD60F3EC98A5E13CFA
+:107170003B72079827CEE619187E86AF6D074F61E0
+:107180001D8242F9015494A28753D7E97179EB3BF0
+:107190008E07F57C7390D585A9C5FE3028FF6683E0
+:1071A000E71B0B59BE512D195E01F7D5D065582745
+:1071B000AE96FA319FA7160FBF05DADB0E6ED12B04
+:1071C000C07E148A21AF0176BB9BC8B9283618BF90
+:1071D000558B4B6E83FE3AC83185639487EDB7D4E7
+:1071E000E2ABEE80F70F4E79CD68A2FD9B0B7D21BF
+:1071F0000FC85BB7ECE0FF41EB8942671E8DC854B6
+:107200005F50FDB56DCAED25289F9AAD4E3245BD44
+:10721000A04D6F6C506D7A4325734CC0433ABD430B
+:10722000EDEF7D6A5EDF71ACF73728917A15F54294
+:107230008438EBDD53E7B32D7A809B05F948399804
+:10724000ACD35B5030BC37BF6DD5E9B9F3DA71FA16
+:107250002F555EDB5D7FFE59D5E9ED5493757AA31A
+:10726000A04EEFC70A0975425EFE9752689FD197FC
+:10727000EFDCE3B9CF5B50FF47837D4E3AB9FC9911
+:10728000EACC9F16445D74BFD5EB98EF159097D26A
+:1072900081F5CBC82AE738A36A9D75B597D4E7383E
+:1072A000DA45E60847FF4B5BC7389E8F8D5FE6786F
+:1072B0003E7EF754477B42E22A47FFCBDB2A1CED98
+:1072C00089EDD739FA4F3EB0C8D19ED2B9D2D1FF9D
+:1072D0008AAEB58EE7D30FAF733C9F79EC1E47FBA8
+:1072E000CAEEAF39FAD753774805B9CDE575C8B9B5
+:1072F000F9A23D4FDB9A47ED12DDE7EFC8A30C83FF
+:10730000F16F56D7A5B2C7C9BCA1FB3DD950C33A4E
+:10731000E6FDC7CD812B91EBD09ECAC6F00A03EFE4
+:10732000CF98075732CD595FAB1AAC3E19F671CEE4
+:107330007A01679DB12A6DC33C9DE7F897BB8449EC
+:107340007DE9AA163AE560B075CA8AE17A6F88725B
+:1073500071DE928B51542E30FEF6B184E75AE6640A
+:10736000A27F61DB4F211EADFDD4351A89818B6967
+:10737000C945F9AA9E91AF62376B1FE51187521775
+:1073800067C95FC0A6F761BF62E999E6B2C1E95774
+:10739000297185C39F745F9B02EBD2E9C7028FCD31
+:1073A000BF77EBC7194AA4109E6B72D824B6780D2C
+:1073B000A9551C700F16CE4F6A07EEA20C4752E873
+:1073C0007195D462DD55CB8A300601481D71F0E914
+:1073D000CEC5FFA30CC6A57EE10CE73A995FE8F69F
+:1073E000A7A97E437F7A07F5A7D1DEB9F423D55349
+:1073F00026AFFF32981FC1F4A17B9D9F971FFD6FA1
+:10740000E0ACF643AF4051A812F787792281FD61C5
+:10741000F3AC4810E27356DDBCF55EABE7521C27B7
+:1074200096AB8A10BF8C75CDC5787D9316D5589EC6
+:10743000388AE334658B7AAA3AB13A0FCB176BF5E9
+:107440000F8CDDDF4FDC45534934553C6DA787E594
+:107450008362FADA2EB0A39979AA017BEED683A7CC
+:1074600022104792CB641DF6EB8402F38E2DBF47AA
+:107470004814E34C5A5044BBABD5EFC0F90782F730
+:10748000668FC0CF7D6CE9175EAF9A3AEE920EDE42
+:107490002D00EFB481E1F502BC4530FF369CBFC63C
+:1074A00063A4C4BF42C295B3816E27BE1CC1742BB6
+:1074B000651B908F1D656C5F4E0D8183BFAD7D0E8A
+:1074C000E5EF873D7958BF8A7C6D9D73B8D1A3E302
+:1074D0003C165D49610EC63502D1D8D862CA6F9993
+:1074E00051B69FEFD54F8C8F329530817896EC173F
+:1074F000313FA8F27888D5EF0F1C9F4DB3BA915E4B
+:107500009BAF94C926A1B7CE3A5648D735B9775D17
+:10751000FFC793CDF893CFEB234BB2B02E457A261D
+:10752000D89FDEF6717CB9F5F7F73C5C7F179002C7
+:10753000A6BF4B9743BE3BDD386E3FA69EC77987FB
+:107540005E5FCFCF17F8EFE982389315E723C16963
+:1075500029E3F2BD7865F9CA5EFA2E373A29FDE4CF
+:10756000E953314F6E9D57A0EACC592FCCE96BD12E
+:10757000D58AA393208B1F5974F626F1B9A75F7C97
+:107580007A415EAEE88BCF5F7978BEE1BF183E5F8F
+:10759000019F865E3333D9F97472E8AB04F35285E8
+:1075A0004E39B4DEB3F8DDBDFE3FFD17E5276BFDB8
+:1075B000163FA4EF6FA6DCD758F9D54CCE6F1A9CB6
+:1075C000B2A28AE7D5B2B75B2F85FD6BD08FFBBE29
+:1075D000CCB2189EEF5588A9835EC8B4F635FCBCC2
+:1075E0009155AFE42B75FA659A6BFFA2F2BAA83EEB
+:1075F000E76DB9FFE63E4795C4AF8B5E93B534F9AE
+:10760000B1419E3FDAC5F3750575F146D80F17DC19
+:10761000CAEAFDF7286435D4578EA832455F2EE4B8
+:107620006F8ABE9F41D75FF0E2438D238124B71A52
+:1076300045E0663CA3190E3B5C7057BCDCC79E4F0F
+:1076400081719ED298DE2DA88CE339E7A6E7C76743
+:10765000819FF0CA5BCB75880F7C945B8CFBA73352
+:107660002F78C2A0FFCFE4902AAC0B7B61E66BE0E1
+:10767000C7FFBEA12B47B6F1C999EFBE3E43A14457
+:107680003AF3DCEB33642456C231FF868BBF98019A
+:10769000709B15A4A416F277BA4A60DC1A8DE5CB6C
+:1076A000AC7A9F5DC3D516B8FED49BCDE289F9E2D2
+:1076B0000E68D743400CFC061ECFBFFAB4B11CEADB
+:1076C0002FB3BB1401EAF11E124CD34FAFE74F3C6E
+:1076D00024809FA576D6429885DE0F1D02949B6379
+:1076E000D9BEE47C112929A27ADF77B8763CFAD397
+:1076F000AE7A278BFFE5D904F37D3D376A09B0D711
+:10770000DB65E31BABC07EAF92B11E67BB7C18E5A7
+:10771000C24DC7E3DE31CEFA5C1E8F3EF4D61DF1BA
+:1077200072FAFE3D5344E457FF8929592485FC6EC3
+:107730006F28C3F903056F579603581FD3BB337ADD
+:10774000F7497E999859D4442A45A2A950BCF8CB50
+:107750000879DBC6772D2209EBF4F90B0D04C7E994
+:1077600068D0F0DAD6A08F2DA61B836F3504F1BA4E
+:10777000B3C1C0EBC30D25F8FCC1869043EE61BEDA
+:10778000B74B783B85BFF2795D1F68A0F3DAE0D88C
+:1077900035914A3DA5D72E9E8F7AA0746AD6DA7E9F
+:1077A000E2607B1ABA86CD19CB9105F5A675FADE93
+:1077B000ADFDC0BFA75158BD08FC9ABBE5C83ED47B
+:1077C0008FD1824536FD48FDB6024259F1DE961151
+:1077D00073E614A03CA2BC4C3B1C457FBC20181790
+:1077E000208E587094DDB7CE5B20BDA8A0FD307709
+:1077F0008EA080DE2C25ED00965A1A2515B4FFCCFC
+:10780000BC25E5709F4C74DE9FA132F986712BE890
+:1078100075B616F991361DBED3B1DB7C96AEE78FF7
+:107820001D1E03F23C0FBEFC2715F605B15FA91A19
+:10783000F831052F9EC0BA8798D0AD4265EC71AD86
+:107840007A8E4CF50C6E0631BE4A150BE59318E89E
+:10785000588C7FF6C4E6F8E1BC4BF494BDFF2E5F74
+:10786000F46E7E7224AC05291F25F317EB6361BA11
+:10787000E97C81E72F8E6BEB626621B469FF29AC4E
+:107880001DA3EFBF901D1D296643D14555ACEB4BA1
+:10789000D0B6FA57C5A0DEF64DAE77883F5A04F24F
+:1078A000966CEBB49D696BCBAC4D3476B5D6BBE131
+:1078B000D09F5E033D57FDA2D00EA051BDC7F07F03
+:1078C000E021ACBB6D6BE8D2630AA7BF45072A92E3
+:1078D000138204EBE9D484901843F5C704FE7D8A33
+:1078E000826961A311F46B420981DE0CF998DF38DB
+:1078F0002141C7B1C9D58434DF41C1BC2FD0711B30
+:10790000AB1B76F3D7B35E961FA827E656C88391C4
+:1079100067141DF3913C4E79DAB2737CBF7A979766
+:1079200035954DA6EF32D03F6B648C83AD2F8A978F
+:10793000AB749EF53F2A0A51CB0A7925AC6B589F50
+:10794000DD3E7C2ACB4B39DA0FF13ADA60B6990D7D
+:10795000E707AA0F3C341AEA02AA49FCE6AF01BCC9
+:10796000FFCAF28FA70E5E9975356D6FA06D88BF47
+:107970006EE8785D8DD27EC338DCD51D53AE83F5BD
+:10798000556F138958C4E4333C9EE2391CBF4CA6A2
+:107990007C72CDD69173BD94CE4F8D09EB22E583D9
+:1079A00095BE71CD1AB4557D02C8CD4ADFC466E0DC
+:1079B000ABF513F9F71AC8C457C332AF97A27C319D
+:1079C0006C4B430CEA13F6AFACBC0ECCEC7091C917
+:1079D0002D6544CC1F4AD931CC5BFCA1999D7781A0
+:1079E00094FE464A87629974C9F4BA4B65F4335BD6
+:1079F000648C17D3FBADCA54A04B3C8CE72B5A992F
+:107A0000DE1FFBA207E3CEC5B5E13BD12FD04B7102
+:107A10009F329A247F302F7D09FC46C719AF93729D
+:107A20003887F0632F8B1716AF58B61EDE93329748
+:107A3000F8705F2EB17350E4DB2C4EBD4B4CB46B31
+:107A400020E78162A4EFAE00E30BF3E152E48BFD8B
+:107A500062C56577435C5258B3F55F80AED9C50403
+:107A6000E80AF7EFA1F7F7737A4AD9211DE8B79F23
+:107A7000D33396104DA88FB1EEBF20ACBD13E46D8B
+:107A80009DF7F9391AC5EB704F383E8CD2E14EEFB5
+:107A9000F3B16001D2618C46F17EE7968E98368A0A
+:107AA0008ED3181EA1DBDAE3FF4CBD11CC4F76A0BC
+:107AB0003CCBD90FAF0379A7CF5FD1E83A9FCAE19A
+:107AC000FA823F2F1E93D41F61426D8DD4D8AB4FE5
+:107AD000346A1F8A6DFDE7507DF0E4A3AC8EFD7A19
+:107AE0003A1FC83B5D07E67F7B26C809A8CFF25145
+:107AF00058C06FF14D1C83F57974DD04FC929E89AA
+:107B000032DA592B8EED9920627C09FA033FF84650
+:107B1000B1FE545022A037E54219F7ABB2B4273C6E
+:107B2000C180F031CBEB0AFA423CB7EA2DB1E571E6
+:107B3000496F1D30B68BF033378EF6584F7781483A
+:107B4000FDCADCE30B85D174BC3BBCDCDFCEA5FEFB
+:107B500036BDBFDECBF4D2FD11F3CB10E220467769
+:107B600001EA2712990AD7FC9B8AF3A3FDD8A5BE88
+:107B70007E7537FA0F3BFCA9CF694EF7B1FD7C93B8
+:107B8000FF880EFC564FA8FC835CE88CDF2CFD615F
+:107B90009D4F70D7135BFA44C9666BAC9B5F910F26
+:107BA0007A40E6F549B21ED2A1BEB23C731AFA7D04
+:107BB0004F7A99DE930E5E79039CD350FF95E5854D
+:107BC000F678A3184FEA2920EDC0AF72304CECF9DB
+:107BD0005F4B1FB43468787D62EAB80A909327A699
+:107BE0000EAFD0A90C1C9AF4E32EC8339DDBC3E47E
+:107BF000F7DCE1DBF0FCE33993C59B80AD302ED997
+:107C0000F9089ED77D5C8E3C8875B5501F4141DADE
+:107C100096EDACDF2AE67831B97E6A56D8F3CD0D01
+:107C20002C7EAC5EB81CE35A2AD7E39EE8AD786E92
+:107C3000C3436D199CAFD48869B2EF1D303C688591
+:107C4000CEEF61A81726E1FBA697C58FAC7A117716
+:107C50005D8805CF0C0E4FDF73194E7A58FB2F8BC2
+:107C60000ED6FB7542385FEF876F6A2E4824618B12
+:107C70007FF4D677AB78FF2CD4C567411D4F347E97
+:107C80007511C84102F7475E7F1D21FCFB4AC8A75A
+:107C900041B9C75E879EE1AA8BEF232F86B3EDAE75
+:107CA0008B580FCCC1EBF8B09E5526DF1428BDCF02
+:107CB00064FC7606F8B535543D681020924D1DE6FB
+:107CC0003FCBFD7DF9C5BBC3230D1B9F0B86639F77
+:107CD000507D6021C6116AF6FBB1DEBF1AF4DF6485
+:107CE00038376076791CE705C29D509FA71C60E37A
+:107CF0003D09F0D0FB7FD4AB0A60DDC761FF93077D
+:107D0000F6242AB1432F87110F316FF818D1993E0D
+:107D100093294FC4B22D7D561D830DC32E9538FC7B
+:107D2000A55D3EDEF655C762A5BDF51FC7B5FF8749
+:107D3000FACDAAEF38AEFD07FA43BBD47827E83B6B
+:107D4000F3058F01F68BBE8FE777CD952568076227
+:107D5000456404E0E1956C15F55CEC79CF3ED07399
+:107D6000B3B5E89B9A6DDF7026FB8DD1B0FF4A3129
+:107D70009EE9186FD4D0C6A3F377005EADE7AF6479
+:107D8000EFC2738BF43D03F386858747AFA1EDE126
+:107D90002F78F0DC90B5DF74F3653E97AF16D77996
+:107DA0004015E4CD0FFAB616E5CC1374E6C12CB934
+:107DB000532F4C70E4039E043B4BE9A7CA51085172
+:107DC000D2E7A5F8DCE47CD6C2EB11D2CF93936660
+:107DD0009E2B509ED3CF3383CB3BE1722CEBC9EF6C
+:107DE000C2F4736ED09D2771EB29EB6AE9A96F711C
+:107DF000FE9449F40A1F9D675DA27D9E0FDF8E4EA3
+:107E0000023FF8038D9D832A697BE86530CFDFF45C
+:107E100084EFF74EC7735FFFE4CD1BBA3CACF4119F
+:107E20005E97D9470F31FFEA56E6AFD6CD9F8AFE5F
+:107E30005DDDF631BAFD9CA2FB5A7521C3A1878690
+:107E4000790DFEBD3D13F551D585003EFFECE6F3FF
+:107E50003ACEAFF49DCF8FCFADF9EE72E9D943930F
+:107E60007EBA0BCEB9D77D5F113DB679EABECFEBB6
+:107E7000FFBD54EF3AE53D0CF22E1791647D17E8F3
+:107E8000876DAAD50E37CF99057EAD4D3F9481FF02
+:107E9000D5FB3E7CE76E9B8FF7372B53F7CF70F502
+:107EA0001F638DBF10FBBBE149EA1FD88FD1FEF2E3
+:107EB0009F3D167CA8BF1E125DE3E558F3DF88E303
+:107EC000597EF7456DEDABA60C7C1A2F87FD53CF7D
+:107ED0006DC480EF4F3C2E877C213BDF6A8C5FAB0B
+:107EE0002E5CEAA0772FDEC739EEBFD71074D4EB33
+:107EF000DE11ADC33AED8B3CFE54453D737C6FCF34
+:107F000048479DEEDFE0F8A4705C9D068E6BBE6076
+:107F1000388A1CF2D90B47B1E3FE278563A1C6F46A
+:107F2000D7727E9DABB373B3730D21D4446FCDA5CF
+:107F3000F7BD94D7BF4CAF1ABDCE9589E9C7EFA264
+:107F400026587FDA86FDFD0D7FBEF7DD6B315115BA
+:107F500074D41548BCCEDBAD77E09C37AB77D31C2F
+:107F6000DF87B3AE3E89D56BBAEF7FE86378F9C699
+:107F7000E5D504FC69EAABA73CB7B6CB2FF0EF7DA3
+:107F80000645479C9BB7AD3ADFCF0A2E3983CDF724
+:107F90008DCBAF2710D79573537FDFEEA09FC1DF46
+:107FA000A285B14E3CA6F7FF5D9A4F0ACFF0243C64
+:107FB000D7209EA43478AAB5E0D1595EB025F8F94F
+:107FC000C0539261D1AD7FFC6CE570930B97201F7D
+:107FD000499C4E2DB07F4BD1DFCA7FB4689F2FFCE8
+:107FE000E141D2F7B98C2F86BE8B0649DF622E079E
+:107FF0002DFAE70BCFAD8384E73A8BDF8261A4D7FC
+:10800000E705CF570609CF318B5EC6E78B9FD62495
+:10801000FFF70FCF5F38DCF9192C0ED252C2CE9386
+:10802000F8A4C88345C2C072E12B76EEB3B5429F77
+:10803000B3CEE65D67DD57BA75FE9AAF339D3CADB2
+:1080400054127940BF630D2C1EF006DF9FFCBAAAC4
+:108050002913E3F3AE795A82FB32FB8BDBFCF72A60
+:10806000E7B9DC81E4785206CBFFDC1875BEB77C3B
+:108070004586AB8ECCC47E16FED28DF7D782B73044
+:1080800024310781378AAFACA27EF60D9F35BED270
+:10809000C9DD50F115D38786AF81E4FD2B43C4972A
+:1080A00025AF7FADF8CA077C4DFF1B7F0D165F8B98
+:1080B000FE268F43C2D7AD439547EED7FEB5E26BA0
+:1080C000B0F2E8DEB7D1FD5DA8BFEF0B7CD6F87348
+:1080D000CFFF69F1688DB732CD3E2F1D3E0782C3B9
+:1080E000BA7EE81B245EDDFBCF2F1AAFAEF93F3519
+:1080F0005EF97843C6EB007058577990F26DF975C8
+:108100006D6AEAEF888ECB64DF711B2FD41E990F46
+:10811000F9E3BF93303F7D64CF9C0DF67AA071994F
+:10812000CCDF3E52397B03C44FCF4532B0F6ECA8CA
+:1081300018FAF934C82B2F62EFB9C73FC2F1E5C96D
+:10814000CCB6E2BF7940D7A391C5FDCA23A9B4AD8F
+:108150000BF34636FA4A7DF17D8418DBA7411E6297
+:10816000416A382C3AA79B77A8F43D1A797C48FAE3
+:1081700067A0F5FE877FCC20F54F02FBE592E4DF98
+:10818000DDB90CF0D926B27AB8E370AB00BEEB468D
+:10819000B0D3F215F97B814E7767B2FC61876A6CC8
+:1081A00080FC8967F182073229DD8E2ECD16ECE73F
+:1081B0002FE764B2FDD78C55A9F75D0B391FF4BECC
+:1081C0002F90F129F83BCCFB2D5DC5BE3F46E4F076
+:1081D000A845B673A7EB5DCFFBD0233380701C4D51
+:1081E00073EE7F017F7FF992FEDF27B5ECFB3E94B3
+:1081F000EF46D9CFBD26F98CCBC7197F746926BD50
+:10820000BE2144BF731FF0D1043F3B37249322A803
+:10821000BFB2C6C99549A74AF1FEAE628C82BC6660
+:108220008A716ECE9C9E7E9C7478B5D663CD03A277
+:1082300008DFE999ABB138E2B43021B3207EE80918
+:10824000DDCDF2878C0F72781DE2CCDA8C4423EC02
+:108250007B65BA4E1BBC1DFF77F67F83E71D474445
+:108260001DCFB7BBF030907E68CA64F9E45C29BAD0
+:10827000C90B7993D542CAEFD86DCC647FEF6852B1
+:1082800066B25E0AE719B733AAC0F72F96C92CFF6A
+:10829000454874D442DBFC9338BFB9DFCB9558BD59
+:1082A000117993C973DBBE75A352C9CF2FB89C4E09
+:1082B000CA2C71D4392E89DCAD807C2E59B0503156
+:1082C000FCF0DCC0F1977238DAD4E8A829FE5E3CF5
+:1082D000A5D5431C3F1DC7A24DF0DD8FD5F502D6B5
+:1082E00009946E647CB77AE3417103BDEEE5F2B7A1
+:1082F0001068601BEFBB9CAE6DFB7CA301FEB664F7
+:10830000FE860E4CE1B87937C17CC893DB4FB7408D
+:108310003EA45B203C7F726325D43574F3FAB69794
+:10832000E9F346C0DF9C3C94EF711B3FAC03FDDCDE
+:10833000A1123C2FF3BB2D9E049C27B0F825A92742
+:10834000369E6F80FAE147D4CE89C037794DB5F7B4
+:10835000A5CA9FBEC4E9F0477F242B951F685D2DF9
+:108360007D6EF55B241B4AAAFE8B2B5D768DC33D8B
+:10837000CCD37986A4C86326F930D1BF9FF64BAE23
+:10838000C77FE1CAF32E39963ACEF82BCEBF6D895E
+:108390008AF568B74C0F9E43B1E0B1F0956B323C63
+:1083A0002D5B2239F4EDEA05192EBF87E1F5068F22
+:1083B000F128ACE3917D3F9D88E7A85CF6C1274595
+:1083C00055787E07E954404FBC2F19787DA3C1F939
+:1083D000775EDE20D1EDD3C17ED64B29E5EA8F9CB6
+:1083E0007FDE5871CB52843F26E900FF8955C3AE2A
+:1083F0002F03FDB24209C177D34FC4EECDBCCDB639
+:10840000FEA45FE382EBD755B7F46BB796AF70D29B
+:10841000AD4D657E81791D93C33B298FCE42FEEA27
+:10842000DE3E93CE7F249133652BEB4EE0EF4C2D57
+:10843000E6BFBF2F4677CCA4FAE694C8F224E657ED
+:1084400098DE58B233D20CA9D353F557BCD44DFBA8
+:1084500079038CEF7E5BDFBF7D74F3D3B89D4E7FD5
+:108460006FC631A2C2FBD1BAD4F6E0DB7A06FF7B3D
+:1084700062A1D1A05F6EDA98BADFFF0266A6F09C17
+:10848000FA8B54952A3E7995CEE05D1D49FDFE5547
+:108490007A267B0E7629059ECF0532B89ED3478378
+:1084A0009E5E9D06DE0F030184F79DE6FB6F823A18
+:1084B00090F75DDF817F27C0F8E26080F1F7A97D4A
+:1084C0002B953CA0538BA0033FBC9D1D9A00FCB68E
+:1084D000267602CFBB1CE0787ED3179912980EF255
+:1084E000B2686E1EA54BC72A12128CF4FAFFCA009E
+:1084F000F31B7279BC96DABF77C1FED157DF45FF17
+:10850000430E8FBE71222B81823AF053A2B90EEB3B
+:108510000CF7F9585D29094DB7FBF15FE6709CDA5D
+:108520003F347A2F8DB8FCA03EFE5FBC1AE7DD9F7A
+:10853000A1435DCA914AA9F35A0AE4C9FD19F87D1D
+:108540005CB75CA49B7FA87EE0A9FD43F303075AB8
+:10855000F78640D1A0FCC073958FEC980672A4C634
+:1085600027A5D2BF969E3ECAE3EF6EFEB1AE5FE591
+:108570007CF47EA27FB8EED8ED84E7A65A273C961D
+:10858000BCBC9F68F2AD013C91CE8976BF94CC997A
+:108590003E809D65F9A974706E77E909E03CA0C33F
+:1085A0009D5CDFFCB6FE91809D0EEEF59F12F9FEFC
+:1085B000E05156973B36B2A622CFE8E5CF6F7D4E0D
+:1085C0007C69D919F738FFD9F9D0B27303F1616E1C
+:1085D0009A3CCE2438E84CDF5F23EB2AE4EB2705F6
+:1085E0000CD626FA3C38AA45CA78DD283146C3F9AC
+:1085F000AF53FB7CF8F7A1CCAD9EC4582A02EFEF35
+:10860000BB7A827D3DBFE27CBA7A49367E7EE27DCE
+:1086100031343F1FEBCE24FC8EDB1BC772E641FBDF
+:1086200091C32268687253DD1A09D6F74680ED3B84
+:10863000576F7C1DFDC1A1F2F9EA5AA7FDBF8AAFB1
+:1086400023E967C93DD3807FD2E1E1358E87A591CB
+:108650008573413FDFB251407DFB1318872EE4162E
+:10866000398C7A9BC4987D241AC50735212760115F
+:10867000808F7FE0DFAD9223AAFD9CDC6DDBEE9F57
+:108680000BFEA15B5E5664313EAEC86276E14D5F83
+:10869000F40FA0EF2DFDFCB6507B309F76D918D09B
+:1086A000ADEF04A39C5AEBD9C8E1A27EDAB3F8FD82
+:1086B00062BE3ED2E3E237315EFD63C07F85867ED7
+:1086C00081CF43F53ED4453FEEC33A2A4BAE2C7FD3
+:1086D000C7FDFE3239EAF01B33B38A1CFEBBDB0F49
+:1086E000F99BBD48DDFF8AAC2FD65E5C9BF5D9D8DF
+:1086F0008B619CCFDC762329D72DEC3CC889631F86
+:10870000CD4D25D7914F08875B9EDFDFE763DF4DB7
+:10871000BE2613F54EEF7E2A3F01FB65B75CC07E97
+:108720000ABEFBF1C8BE9F4D84BADE13DBEFBF2942
+:10873000153D67E9CC6F22DDF98E78DEDA00C1FAEB
+:108740006F42E77BC236BEF55E525E06885F2E5BE7
+:108750007925EE27DF5879F5E835A57DF7157DFAFF
+:108760000BD17F580AF336F2FDF40E4FD5BE54FB01
+:10877000408ED7BE7162A77FBF746379336CA9370F
+:10878000655CF3A5688AF993FB9A8DA9E3710F7272
+:108790003D95DCD798745F43F1D1BD4A0A944DEB07
+:1087A000DDD7749B9FCFBEE677A4E7E73351FE5336
+:1087B000C3F73D8BBFD4E88E2B297CA7E8FEC70406
+:1087C000F911E97BC02FDF4ABD5F7B9CBFF7BB8DF2
+:1087D00043D457C79CFB9974F2F7BDCF48FEDAD457
+:1087E0009E51A0077EB7F7E3B7EE87F5ECF521BE03
+:1087F000DDE3447489EF2F7CC8B7967DEE5099FE77
+:10880000FFDDDF8DC0BF9BED960F42E2D75F459F36
+:108810001FDF274E81EF2CB6EDCBA84AB5CF59AF5D
+:108820000B3CBEE48CF710EEDF2DE5FCA6EF7BBA27
+:10883000D61E8F7E93EB2B2B0EF0BFB3989D5DB2AF
+:1088400060A10AF19EDB92F126829B15FDB2C2BDAA
+:10885000F0FD8B5FF2F35CE6DACC94E7E37EC3F1E4
+:108860003B501C62C52A679C60C982FEEDCDC9449D
+:10887000EABA2C8B9FD3CD3754FBD296185A5E6C34
+:10888000A0758ED007675F9692DA2F41BC631909F5
+:1088900029705D426A27FE98A2F2E4EEC508CF2F48
+:1088A000ADBF7FFCF1BD13ED7ECCFF0710F667274F
+:1088B00000800000000000001F8B08000000000086
+:1088C000000BDD7D0B7854459670DDBEFD4AD24924
+:1088D0003A9DEEBC091D020818620742001FD02114
+:1088E0004482B2DA810041519A87184948A2E2CA0B
+:1088F000FEBA438720467466C2AA8CBFE3B80D82D5
+:10890000EB286AA2D1418CD8A0F8D8D59DA0AE8B17
+:10891000B3E846C7415E4322A32BB3CB0CFF39A774
+:10892000AAD2F7DE744370C7FDF6FBE338D7BAB7B7
+:108930009EE77D4E9DAAB63915C63C8C7D5B73FBC8
+:108940005F4D628CFDABB579BCD3C1D859FC9B1E81
+:108950007DFECB3AC6221731F6E13A3B8BD8A01CFC
+:1089600036558563D4FB53AA8931E8E85FE1C14AF3
+:10897000190B2D50C33B94C1F5B2705CACB7785E57
+:108980006A30463FF2B9A04665113BA3BFB3F06F12
+:10899000CD9C245DF922A753F4D39A182C62EC885D
+:1089A0001CF7513EEE91307F2FFBBB488C7B247C23
+:1089B000EE716F7E04C61D131DE78666FDB8BD2CE3
+:1089C000B48AB9619C70A2734701C3FF8CD8264456
+:1089D000DBEF759A08AEEC48A689653076876C1B8C
+:1089E00067BC0F057C8DF56BCC7E8B161FB7A77A05
+:1089F00069FEB25C33473F4F6F8A938FCB9CF981FE
+:108A000064C68E6E4BF4133CA6258747C13C2BED04
+:108A10002CE480793EF8E4C59FB1118C2D13F8AF9A
+:108A2000097C6D41781C35F5DF938CEBFAC0E4DCF2
+:108A30000143951DF45BB4F0BB2B85C3EFE8F673DF
+:108A4000C3EFAE143ECF7955FAF9CD3F98A82B1B52
+:108A5000D7FBEF7F7BEF04ECF7DFFFF63B8BB6FF36
+:108A600005A77359243D5A5E52ABF8C34583C77DB1
+:108A700029D53A24B8BF6480E392D3F9D4BF5B65AB
+:108A8000CD1D31D655EEB453FDF981728B07E0B997
+:108A9000FC6EC5A74017339CBC9FE566E6EF80F9E6
+:108AA00030B337BF1AE0EE696DBE2310A39FFF23DA
+:108AB000E0FD8D23901A8BCFE4F363410FB2DE0209
+:108AC00073D012ABFEC25A3D7C7B19AB8A35FF1FB7
+:108AD0003B395F0E951EE5F8C6FA439DC7DD820E51
+:108AE000D36D91DF33155E9C807ECA2E605C437D22
+:108AF000E3B8F73BF5F8338E7FF4CF6A5D2C38BCD2
+:108B000026F83F1800FA89F93D99BE7FC0DA1B7735
+:108B1000137F27F9762018B62FFF09A09DAD9C7D05
+:108B2000C75BF09A25A614D0FA16070E5412BB9D07
+:108B300079B018F1FE6DD5833F2985A91DB5065B77
+:108B400093A1C1D1F58A2FE41D3CCE07B84E90A366
+:108B50001FA13CBD08FB639C6E67C2FF65333646B0
+:108B6000F5D7A3506177D9BC3B347CEB5EFBDD3A93
+:108B700056CCD853D6C0FA64783FFAEEAFD73094CB
+:108B8000792C4CF3FEC2E2BB85E0CD18F1FDA16D5E
+:108B90008EAD9BA05E6A0A97938CF9F203E335725F
+:108BA000C2ECA4F250F1F3611CFC5CA89C92EB8C2B
+:108BB000370E409EE6377786A34D4965ACCBEABDBC
+:108BC00009D7D33F3BC1B90D5038D7EABF1AE1F3FB
+:108BD000C10193A9A580BA35239DCEE343B0826B32
+:108BE0000AEE1F578AF2C7E24F80A954431B36157D
+:108BF000E868862384FD957E38E719C4CF83B536AF
+:108C0000AF8AFD4DF37EAA4279EE5536EF7AE8AF92
+:108C1000AC67C45E37F43F7F8EE264D07EE6EC51F1
+:108C20009E5E585FD25AE8270747B8B7AAC2CCD889
+:108C3000D3F89F97323E6180C55C45965F6C9B0977
+:108C4000F2609CA7CBE40050AF4C7BB1CD0EFDDEB3
+:108C5000D312C872A6C1D236DFD7661FC658468661
+:108C6000BF67BA8FB1D99BEFAFB25F01EB7C54B451
+:108C70000F3DD0E6CF63EC5553B04081EFCD9B77ED
+:108C80005499015EEE4239FE2B6DFECB613D57DDFE
+:108C9000B2630DF4BF25ED9FAACC38EFC572FC9EE0
+:108CA000AA8A9130FFCB65F95FEC385F77926C0F41
+:108CB000F39DC298654474FEE62C18DF25CB9F54C3
+:108CC000CD84F13F2E6FAE30C3F8C7D2FEBDAD6884
+:108CD0002C6393E7943BFD50EEDBFC1F5549809FCE
+:108CE0002E06740AE53F6C3E4DF377AB26DE7FE837
+:108CF0008F34BFB2C5A171F85D617F6AAB8275AF79
+:108D0000B6F7BE85E4DAB43664CF4091A4703AB1C8
+:108D10005B9AFDB9003BCBAEF2482E4DA79DD36BBD
+:108D20005E643CEAB181F218288FD794B378B96BAE
+:108D30003D5B124BDE76BAB81EEE4A8CFDBD228D2D
+:108D4000CB03801BE993D483CCBF33865E1997E6AF
+:108D5000A07EF627B290DD15E5B76B8187A7005F8F
+:108D6000323B9FA7EC6790FE48E3729F85AE75216A
+:108D7000DFCCC12E60E9853E258474CD9A93C2A3D1
+:108D8000907658C43C0FF5876AA2F97A5465493544
+:108D9000F49791C8829DF0F4A4332A437B7FA723E4
+:108DA000DADF7B82EE2B0B03DBB1BFCACCEC92D6B1
+:108DB00082683F30EF0DF609BA799BA7B8F0FBDC6B
+:108DC000925B8B34F02CE2EB003AA07630CC33D3BC
+:108DD000810FBA7AC68DD804F3FB06E5AE27BAAE8A
+:108DE000B29EB91606F5B6B8843CF1F2F69E0A2E8C
+:108DF0007FFA6F4D0A6F43FEB4FB4A104FB2DD0D90
+:108E000002EE15F7CEF919D66BE8B1301BD45BD35F
+:108E1000599EC9CEA1171B4E5FC6C213356573C4D8
+:108E20008A72A7E1F4347A5F71EF7B56E453ECC7A2
+:108E30000BEB5A93E0CFF421DC5A63E39FB1169A0F
+:108E400047C3E934169AA87DCFE114EDDF4DDFCF9B
+:108E5000B7AE687F2A0BA79FAB3F2B7D1F80BB5906
+:108E6000C0DD1A7B9E1B04FD20BC4D1AFA9A2FE828
+:108E70000DA49F1FE5E1A16B8AB6A1BC8F8EBB9E9E
+:108E8000FAEF32031ED10EEC49F4A25D5C66E6F205
+:108E9000B3ACC7E50C2951FA907421F1DAE56A2EDA
+:108EA000A7F5562BCE6D0583E775BF9C97D0A79984
+:108EB0008B83EA52CDFC243F40FF5DA2FFD229C440
+:108EC0003FBFE0F4027C7303F22FDA2DB80E5F642B
+:108ED000FCDCE4C1F33F0DE4854FC02387FF5F391D
+:108EE000C2A80724DC06C33FF73CF8CCA7EF653DDA
+:108EF000FBACB8CE86387CFB802B85DA651E8CA453
+:108F000078A1DE19617774754C4CB80CF9628E89C2
+:108F1000A108C375A3BD5A36206FAF7C7706C8DBA6
+:108F2000CC8132C85B2FE26140FE46ECF668FD1F43
+:108F3000B9AE9CBD01E4B5DB06F82F223BD4CE349C
+:108F4000FEC4EE346EBF4D09B29876CBDFB9927590
+:108F500072ECFFAEAD60BF85F599D3B8DE9FD21B32
+:108F600052102F92AF8D72EA13C18F1F8BE7FFBC97
+:108F70009C52CE23A7AA859CE2EFF783998FF53206
+:108F80003222E315D089CBDE9D380AFD99DBB2543D
+:108F9000EF97C057F314DFB067A1DF1ABBF79E64E9
+:108FA0006F944E6A98DDEB40B883D17416F5FE9C41
+:108FB000042AE31FDA25A7DA154E87CC9B5A333EE5
+:108FC000BE1C92F3B82DCB4AE32DBB6F546A503BC5
+:108FD0003FA127AEB5459E658583F95C9661FEABE2
+:108FE0004DAAE6BB83EBB3B1C9FE6FD2D00E555884
+:108FF0002DCDC7602F3904DF19EDA587B16F0FFDA7
+:109000002F62233E3691739AD9660B33DE24847E19
+:109010006A660713FC1A313568E8C0EECAA3792CDA
+:109020005E081F2F01A6B4BF71C9971A3E7A07E7E1
+:10903000437A213209F934C1C57476DE623590A7CE
+:10904000A0DD9A69F3A19C013C111CF62730730244
+:109050008CFB363C116F95EAAD7B2D6EA403C5D712
+:109060004AD0DF2AFC5616417D73EDF424B25BD959
+:1090700099DB4756033C3C499C6EA11FBBE8C74E99
+:109080007422E4DEAFF3C76E43FD24E5A7C4033BBF
+:10909000A3527FF2FB7EA53ACF09E5FD9E8B4A5A8B
+:1090A00015BDFD83F650D47E4ABF6F16F0E3E4AAE7
+:1090B0008E880958A825E4997D27D4AF4CE26B1E11
+:1090C000E9E27A707F41484DC1FE46C13AE0D55B86
+:1090D00089C1A26647141F60E304117F1956783ACC
+:1090E000387FE0739F8BF3D99C748E942DE9BC9CE0
+:1090F00091C2EB1BE9ED49F17D95C2F1BBA99CCB77
+:109100000963BDE92EDEDF6A7BA82A6384D6BE0A26
+:1091100030A44333E37696DF25E8A482C3ABE2DED6
+:10912000C5A9A837BFED999FCA8AA272F41E25E887
+:10913000F441FD7B2C819F52BCE35F5486FE883551
+:109140002DE87441BDF4A4D8FEF24D621EE9E84F4B
+:1091500043BD9F087FC772FA62F2B317BAB83C4B9F
+:10916000C9AA21798E30F4A29FC2FA434E0DFE5255
+:10917000A798747E83E57431B5BF70BBA1248EDDE2
+:1091800050AAB31BE4B846FBE1D37559347FD9FE2E
+:1091900086AC8F2A99A6FE8DACF71EECEFC635B9CA
+:1091A000BA38513CBBE32E011FB4134231E765D5F9
+:1091B000BDFF14FCC49076FC237CFCE8B849C06871
+:1091C000D171FD2EFFDD2EE2A7CB9D872F864702B2
+:1091D000BC5749DF90DC07BDE4DFEA207D5485F20F
+:1091E0005AFA47C8F7CE54A4F1F20DAE491AFD2839
+:1091F000DA19E5D09F453CE3CF4E6EFFA51E94F6ED
+:1092000062A25751A2FA66B0BE127AC62017CF6783
+:109210005F03BD86B4FADFD8EF53AEEF6B5716C6C7
+:10922000A18FD1FF237665D9E541753CCACD2A854A
+:109230008D82C7E4997A3DDFEDE2FE47B72B49A75F
+:10924000E7E72ED6D78B60BD49F84C1A92BFA2D55E
+:10925000438A8AF28EF7D728E8A1E0D807562FC8AC
+:10926000DFFF1276D017E9FEB791AE3624A614A31D
+:109270007ED8FAA78A315B61DEFDEF5B7CDBB0BB99
+:109280005D9C3ECA17AD6935C37B4B87E2B4318D17
+:10929000DE5ADB79C90A58EF0792FEDD7C1D0DEE20
+:1092A0008875248C9BD3C0C7CFEBD8AB9835F22DF3
+:1092B000AF8ED73BE4B2E8F45EAF287F26FD0F16F1
+:1092C0006EA92CC5FA7EF326107D391D0AC583735D
+:1092D0009A01004007393EDEBFC31756961745D79F
+:1092E000D966AA2E42BDD09691E443BD30D61D3C2E
+:1092F0008CF4DF70281241304D3ED46346FBAEC281
+:10930000EDFF0ADFCB757A55670ECAD5A4437C7E84
+:10931000ED067A070B59D0F9362E6F55F60E437CC1
+:10932000A0EC80F132D68F21BD24EB67B8849EC8B3
+:1093300060C117C8AE626D8CF0C5681D19EB47930C
+:109340007D2FF119B5A3C64E403BAAF0818879194B
+:10935000B4DBFD58ECF8BC45E81158074BF744D78F
+:10936000118F2FA41E93F52C71FC6849EF4955B15C
+:10937000ED53D000F4BD7C91FB3A5C77C3062BB370
+:109380002951F857B803E9389F9C8EAD0AC246D2DE
+:10939000D706D7D34A2EACEFF65B985365F1E7DBDF
+:1093A000B0F6C54B5668FC2DE89FF0B1D5CAEAB4BB
+:1093B000FA54FA1317A773FD73A73B3002C76DDC8D
+:1093C000B5D98AF8BD65FBE7566DBC7BD03A8608F7
+:1093D0002FA58EFB290DB5F630AEB37C9199F057D1
+:1093E000BFC11A4679D4B0B33362427BFA6EE6430A
+:1093F0007E6FE8E87C2B07E092DBE09FA47AA3FD78
+:10940000E53684159C4F0610610FF979112BEA6738
+:10941000235DA33D8C76C95B099CDF4F943B420AD8
+:10942000C0EF8425D880F54E6427F942055178BFF6
+:10943000DD39EB1D05583AF9055B049F6DA66D59A2
+:1094400076A8D736CEEA433AAA700767A5037C5CB4
+:10945000E64017B64F7327FB5AA0ADD7C626907EBD
+:109460001E221C261BE861F2DD9C4FFE263D45DADC
+:109470007B13500E2D4D4F96F612C9A7B72C7C1DAD
+:109480001B189FEF3E977F01D1ABD345E3E63444F1
+:1094900014B4F78DE346E9C9BFF842E81BEC3C2B56
+:1094A000CAF57A2167CA176D577EABA1837A3064FB
+:1094B000905E72766E55D00F84EF2D956EAACF6CAC
+:1094C000286776F2FD887AF87E9346AEC875C49018
+:1094D0002FB7217C1D877ADEE4F22542F427E76B63
+:1094E000C4E78FD2B91D77259805F4DE1A1AE385F3
+:1094F000FEDE1A9148FD497E37F2E78F049DE7D4DE
+:109500006E57306EE04EE276A39C9FACF745FA8C26
+:10951000F5389FC9553D0487D5B566C29B9C4FA5BC
+:10952000353012FDAF76D1DFBE859F597BA1FCD0CF
+:10953000AF0E103DAE6E57FCE417B41FB0CEC7F8A7
+:109540005CE8972AC663AFE62609DBF2D201D22394
+:109550005777F138C1EAAE4EF37247944E0B8EED59
+:10956000BB11E96C75878D2528883FBE5E239D82DF
+:109570007C21BA67212BED67817C0C913C65C1028F
+:10958000F447A4FCDD27EC4BE6E0EF9F10F396FDDB
+:1095900046E56602D17BC1B109FBEC00CFD53EC5E3
+:1095A00007A612D8DBBC1EF41F21F9CBD808F4CBD8
+:1095B00064FF46F8FD5AC8D518787E3E3D861E9158
+:1095C0007AB5E0F1190C9F127F660177D9EF9E748E
+:1095D000BE9FB527DD4CFD6F28E7F1EB0D16AE3FC2
+:1095E00036B4D8C3C8D76FA75DF98E520C707259C4
+:1095F00023F8DC6F5AD680DFF7E7F079B499D68F7D
+:1096000069E6FAEBF574C25F0AE3F289CBA3875EE1
+:10961000E4F2A421E4203FB12158B382F61FDC0913
+:109620003EB4F759F04DEBFCE4283D18F1EB7D61B9
+:10963000AFD50BDFAFEEE07C10855B5847B720E776
+:1096400008EFFB5C723F2258807005FFBD05E30CFC
+:10965000D27F4F591C08257B07F36BBAF0DF27092F
+:10966000FFDD32C5FE17F5DFEBD7FE5336965765A3
+:10967000BD4B4FC92FE027EAF8EA84F0DB0E08BCA7
+:10968000FF41D04B7D6907F143FD97CDC4478E2A3A
+:109690002E4F1C87F47290B11F8BF53F40FD54266E
+:1096A000755CA9A23FFCF78AB395C59FF7CD4AF335
+:1096B0003F4F45BC74AAB42FC5CE80555F06704D90
+:1096C000103010F52C6E1EF73EF1142002F9D2DC9A
+:1096D0006C3D97FD7BBE7E59E42305F15D2F607DD7
+:1096E0006267C5D4DF613CF1A954DF2858FAF19DC7
+:1096F000F3FEE677D0FEC4F6E93ED4D3EED600D131
+:109700004FBF27C1877143B70A962DD0434BC71B64
+:109710002997E1BED833974C40B999E7E67C79ECBC
+:1097200045752DC267FD3F3C3F0DBFD7879574B48B
+:109730001B4F3CF5F77F46BD58B7BD093D0DD6FA26
+:10974000CCEB64879BC25BF9FBA752C9BE3CFAC451
+:10975000E66908F7D68E56FA7EEC89AD54DEF70F2F
+:10976000CFEFF94FB43702293EAC77ECC5CD3FFAC5
+:109770004FA4F39A141FAEA32168E6FBB692BE8DE8
+:1097800072AB732FF1A9A497AB51EF229C6AB9FC7D
+:1097900091F4FC85D8575A56E1684379F6C5A6E49A
+:1097A000BA58F144BF582FC65C488ED52A144F6B67
+:1097B00003AAC1B8465B229B82CFA4A2883517C6F4
+:1097C00059B8B8731AD93DA1CF5762FD79BB12D8E9
+:1097D000268ABF61F016EC7F2275C6C683183C0C42
+:1097E0007E32F4BEFD2CD8D71F5B309643FDE9ECEA
+:1097F000FF796DEFFE11E5688DBD77AFC71B7DDF8B
+:1098000026E234509FF44ED99AD8F1D02AB743D0EB
+:109810002DD79B395DD5795E921336DF288D5D3A61
+:10982000EC60F32610432CA7AEE74A5CC75563965D
+:109830004E24BAC0381FEA9F9083FA5F8D714AE0C8
+:10984000B3456ECE4F194EE6BE14C6AF3433B703E0
+:109850009F8C7D642139B283FA05FB83EC2AEFEB00
+:109860000B77A03DB2C512CC9E84FDB409BDB59D59
+:10987000CF1BDA3B71BF14FA735E3A81FAE9B1B8D3
+:10988000A87D88B79FB5BD4589CE1728351FF51629
+:10989000F657EA403D13AA25FC78ADB4AE635825CF
+:1098A0009BD65D7CC3F828FF1AE33B28CF701FF8D6
+:1098B0004E77F96DEE49D1A78CFB18E1F9327E871E
+:1098C000757FEBF6D3933D95AED32BF1EC957D0BE5
+:1098D0004F72FDFBEAE7246F1A918E71FCE0973A14
+:1098E000FDBB5CD2F12B9F131D2FDFC5F56FE3AEDF
+:1098F000122BD2EDF1757EF65B30401BC53EEB16A8
+:10990000A57725C5795E497062FCEEA4D037F50FC6
+:109910007C7E18F74747ECCA26BFFEE42B09B5D872
+:10992000CF7E9389E0B97FDBC55B5B15ED3CB93F2A
+:10993000007630916A23D8A9DC0E5EB119FDB3D54B
+:1099400075CC87FCDF68A09FC65D07885EA41D5CA0
+:10995000F0F8DC15DCFE4CF025A0FF3693DBA30C01
+:10996000EC51AC9F3633DC6225FA2A2943FADAB788
+:1099700070CF46D4E38D339913FBDF32CCFF4A2EF0
+:10998000AD476198CFB2C5D23EC30CEDB7547A9DB6
+:10999000004980DB76B27BD918ABD0732BC85E6EE2
+:1099A000CCBADE477C669407AFB490DDD5E84DA411
+:1099B000F95CBD4BB98DDB230EC6E7AF107D5E1D94
+:1099C000BE2C8CFBCABF17F093703C69E9B911E15A
+:1099D00071F2252044F87EF54C4EAF69333B488E3A
+:1099E000BCFDCA2CD2E3922E935FB6913E77999D2F
+:1099F0008A8FF4DA3C9B16AFED16AE97D2849E297F
+:109A00007C80E33722F82922F440C46DD5C75B9CE3
+:109A1000A162D4BBBF17F8273182F25DC893D52B62
+:109A200022C44F0D3B797F6E9BBFE4760DFDBA2BB0
+:109A3000B85E94717FDC07A88E212F7EE7E6FAB12D
+:109A4000E0F1659BD15EBE0AF08E2A25678C90A35B
+:109A5000401708B79CBA00D1C155EE9B7D6A01ED55
+:109A60001F909FD8DF6265B1E23C47851CF5A407D3
+:109A70004A31DEECC94C263BC7A3969B12B05D89E8
+:109A8000E2DBE6A5FD4DB2F3FA3DD9BE6D3A7E0F9D
+:109A9000949AA0DE918C648EE7F0AFCD73C7231F3C
+:109AA0007AA59FAEB3FB06FBDBDC6E9CD31E2A4679
+:109AB0003F44EE5F4838845B126BB5F2B34FC02170
+:109AC0003C96C7F3C1BE7750FCDA09E3A05FBFED57
+:109AD000B227B85FDF4AE31F74F3784625AC0FED79
+:109AE000364F61600DD7A7C9BE58F0B853E079DF93
+:109AF000C21B4BD0AF6CAC71F890DF1E7A55594643
+:109B0000F48CC141F4B7832B080F0CF080FCC082A9
+:109B1000DC2F6D6C0E8463D37B35F15F23F29F42A3
+:109B2000F44EF176A0F730A777AEFFA4DF8FF2B145
+:109B30003AC67EA8942F8DD6DED148C7921F1AA7A9
+:109B4000F58E46B80D559E9CB400FF23FF001C9077
+:109B50007F24BF24EFE67CB2A9C55B8EDF37553288
+:109B600067AB461F19FD259C27FA9D52AE8F7507DE
+:109B70000A3D1807304536621E8594C38DBBEF1B26
+:109B80001D2BCF4DCA61BB99CB377B3829DCAAA1ED
+:109B90002FDCDB4B9E404FCADB495A1B3B2E52E663
+:109BA000718878FDD0F222325097A3BCD996144622
+:109BB0007925E344C67EC778145D3C46FA2DB8BFCC
+:109BC00080F5E77A38BD547AB89CB85E3CE5FC2550
+:109BD000FD7B4DC1CF319F289EFE92EDFE52712B31
+:109BE000398ED4A346FCCBFD115C4F7551FC7AED48
+:109BF0007BB97C32D2E372C1275E5C2BD47B4EEC06
+:109C0000670DC62FEF87D59A75F96F6DA6CEBA5836
+:109C1000F12FB9BFC11E320F29BF6EEF3A9E47F533
+:109C20009CC8A7658BCDBA7C2A87CFDB82F1D3197C
+:109C3000F6821295C6E571ACE469EC6BD4C3C5BB82
+:109C4000DAC7609E9227A0DF1FC9AC4DD4ED3F64F8
+:109C5000075DBA726E5D8EAEFEB0E611BAEFC3D785
+:109C60008ED37D2F084DD0950BDB2ED5D51FD53E3D
+:109C7000439F8FFBC855BAFA63C37375E54D2D1D1D
+:109C8000B588978B9FBA4ED76E86D9692E01B88E4C
+:109C9000EF58A6CF1333C033F5CF6A4C3A7CD2537A
+:109CA00040789D61D6E70B5FB24B0F0F4C8BC3FE24
+:109CB0008A99E86FDA9109E7CA632D66E66F7A65DB
+:109CC000FB82C1F4C0ECBDBE400C3F53D2B92C1B8B
+:109CD000F7B1A4FCB850FA8B374F497FF1BEC78368
+:109CE000DBBB1EB90FC3E16219804BADEF5C70B1F5
+:109CF0009C0F2E0CE092FCFDE162EC6F7D5223E59F
+:109D0000037F84058D7DDC2BF84896178452B91E9D
+:109D10000ACC3B8F1DCDE3C0411BDF9F347EB7676C
+:109D200070B9361AE640F019225F7F26F070281EBF
+:109D30005FAFFD7A7F26CAEF2A467EB3B3B9E56BE3
+:109D4000D45B4BCC1186F4FF9058CF169117FAC80C
+:109D50003A27F5F3A8D87F7C6C9D97DE3FBE6E0C4A
+:109D60003DC3EB7CF47EDBBA29F4DC0EF61C3E9F8F
+:109D70005C5745CFA7D605A8DED3EB6AE9B9735D7A
+:109D800090CF6B10BE5819D93981F498F1D2A52122
+:109D9000754878626A5E4C7D19B71F75F139F3C852
+:109DA000D71E5A34FB4D0DFF666524BB0F630EE3CF
+:109DB000643619F733CFD7FEBB75B5B3DF1C3574E6
+:109DC0003E92F4C4CEA48F8EC5D741913FF9BB8794
+:109DD000CF6E0A15C5875794CE62C3A9C67E3207D7
+:109DE0009DF562B41934ED0F1AF8B826981AD36E9F
+:109DF000A811F4596BE3FBEF8B0CFCFD92F8FE52BB
+:109E000006D7779FC49133576798A43F6FA1FDC0D1
+:109E1000417CF7932B62C1777F8657C7C78B820639
+:109E2000BC1AFAF9C4D23ECC1783CFCED78F5C9F31
+:109E3000B1DDC3195C6EBDF8FF297F7E725332F924
+:109E40000F08378F66FD9FDC94541B2B2EF35A06A8
+:109E5000DF0705EB9C15B8C8D40F59D1561CC3BCFD
+:109E60007C9F77A413E343320F203EBD9A298E4492
+:109E7000305407C315F0E1B51642FFE68171226642
+:109E80001CC7678AEA59CCA9619A731EEA607A8076
+:109E9000F6212BE5EFF4E6D0BEFF05D213531F1BCE
+:109EA00075AE7DBA41ED2F50CEECF881E58CE473B0
+:109EB00076E6C151B1F4642D8E7D29AC63CBD4FB21
+:109EC00049CE9CA7DF0B855FADDA4BFBD64386DF1F
+:109ED0002EF790E2526BED29C50CFCBAEF12F83365
+:109EE0003483F1F3589F2584D1CE3F20E6098EFFBD
+:109EF00025DCAF6E9E8CCF7FCE0A7C9801ED975902
+:109F0000B99F383EC3FF119613C53EB035D3BA1181
+:109F10009FCCC9D7718958C74693371FD7F1A5E29F
+:109F20001B8B7E8AD314F6E1338545C6F3BCBB7028
+:109F300010FDB3F48B13BDE8DF268E66AC87E2E13B
+:109F4000BE048C9B5993FAFF7124F2FBEB268C30F4
+:109F5000B2E79D7CBECF3F924BFB2AE801A17C2853
+:109F6000C6F730F54D688743FB6B59F018CEEFA864
+:109F7000D31E32C1BC8A677FE1C27CA8E7BB67D031
+:109F80003E42E4293564C5730B3D27FEEE6AE8EFD7
+:109F9000921E0BC59B2F612AC9F37A337B00F926E9
+:109FA0001E3C8FFF75ECFCAE2B32B9DC93795BC69F
+:109FB000EF79E2FBF13879C48E4CAE17647E8C45A4
+:109FC000E6C778FCE7CC8FB118F2632CE600C37DBE
+:109FD00060CB407ECC6246F931D08F363FE6F88CBC
+:109FE000D8F3708B79584E27C5E93785DE1F1F716E
+:109FF000EE755A4E27E8F2ACA3ED1DF43E5E7ECE20
+:10A000007831FEF138F9496307FACF66A1746D3BE8
+:10A010002F9FF7C03879F4DD62C8F3897EE7F93DF8
+:10A020001BD2389DECCD72BA9742D74B59AF05E998
+:10A030007489C36DC1F85180F93AE9DC8ED9D2DF59
+:10A040002BF96E04D6337F8176B609242DDAD94BED
+:10A05000D65ABEE8D5C8A96ABFBECCB0BE46EE6E21
+:10A06000CA6234DFC4716328AFEF14F3A63ACF217C
+:10A070003717DB55BB59B3DE4371EC865B05FC0E2D
+:10A0800065C786DF7599DCEE88771EE2D6CC14DDD5
+:10A0900039BDDB9DE7969708DF60BAB67F231EDCEB
+:10A0A000F4FD7C70F6E0E61AC6D1CA159EBFFF1714
+:10A0B00087779A3857C5CF05580C79E89BB2B8FC1A
+:10A0C0008BCE9BE7A17FE40CDC9E8972D1EC1DADA9
+:10A0D0003D07D065F6274D80E72121778C70D99D0B
+:10A0E000C9ED37E3BABB443E7DA2CA9A3B35F0378F
+:10A0F000AEF73941E7B2FE060BDFBF82BF801DF02D
+:10A100007203E372EFE1CC11222F3CCD8CF270315F
+:10A11000EF82DDE07C8BF693249C07C14FC0DD0805
+:10A12000C700F3DE8879DBE783674796FF6184CB5E
+:10A13000D203895694FF37DAFBF7A38FDADB63FA91
+:10A1400078243C3F778C3CBC9DE1FEDB9897F7C1BF
+:10A1500033658A8FE751B09964EF28A15CF5ECC5AF
+:10A1600043B77736A604C7207F7C29F2AEA53EDA36
+:10A1700098736C34E6CF7B5DE5ABB23C1477F7A700
+:10A18000231DBD66E374F408F404E5A63D63B7A29D
+:10A190009E79302B5887F5641E1FF3F78FC63C84D9
+:10A1A0000B8513FC59908ECE07A7273219E1E75093
+:10A1B0004A6C3AF94D1C3A31F2079D2F2BFDE1F81C
+:10A1C00043C253EE5BC8F9D565713A944F093763C2
+:10A1D000FE505D9649D4E3F9880F660508CE7DC32D
+:10A1E000BE3E9C00733F64C8F792CF93421E9D6FA2
+:10A1F000FD12DE3F941C3E94187B7EA6ACA1E1E7E5
+:10A20000879A5FBD9C5F71ECF965660D0D7E01D686
+:10A21000FF59DA0FA0C700CFF58867B6A19FE4E326
+:10A220002157EC79960D799E41CB0FA16F257DB317
+:10A23000D0D23ADAAFCF4A8CB95FBF00FC27F47FA7
+:10A240008CFBF6727F1EE407ADB7C6DE7F633AE291
+:10A250007DA65877068BA4E17EE61E1BC5FF8DEB1D
+:10A26000BF42D011C0AB82E035A79FE2188746C736
+:10A27000960B15C6FA6D7C9C78E70BAECE528674B1
+:10A28000BE80950629FE576E774454C0C36D021FE9
+:10A29000D6DC553EB40FCBB3DE3B88EB04F89F18F9
+:10A2A00080A7269FEFD8BA779C232DF1E576BDFADB
+:10A2B0004259738CF5043DC11BB3347E50FD53EFFE
+:10A2C0003A476AF0359EF59AF8F9E87E93CE2FCE9C
+:10A2D0006417E41757639F988FE00A903E40FD8013
+:10A2E0007A67E3EEA925884CB433309FA73F3991B4
+:10A2F000E4686BCEA563BC1A7886B2A47DA9C6B10A
+:10A300001BFF7BF9FF51BB49D1D9AFD1FECDF45E24
+:10A31000E2A7DCF18F31F111F4F8EF213DE6F26FA5
+:10A32000C4A7117EA17B2F4FA3F30508BFE9D1FE7F
+:10A3300006F01F07CF1D1E7F3BF6D720CED1283257
+:10A340008F6F205E61761EB647E13D54BC248A784B
+:10A350001AD80D8F211D586D821F9983CE874BBB54
+:10A360008519EC1B3686FBB73764BDF7478CF76C55
+:10A370004CE12CBBF14709E4072E519C565C37D8C1
+:10A380001F9FFE1CEA0759E4D3BBC83F9476469250
+:10A390007A3669E8F394FEF2F9F2A9F7A13D06F3E3
+:10A3A000996172D0FEE63E585F36C88D1956FE2C74
+:10A3B0009F055405FDCD50F3BA7B615EDFB2338952
+:10A3C00057C0F3A78CC361CD81DFB9D01F9D61B6A3
+:10A3D0001CD3CA2D63BCE38DAC6437E151C43BBED2
+:10A3E00065737E7D31C2E57217C1A5F8959999DA3A
+:10A3F00078CB40BC43AC635E682997A7063927E554
+:10A4000099C9CEEF11617EE6756650DC88C33DA424
+:10A41000303394AF90657452A07CB9409282ED6164
+:10A42000DD5788275B16CC423983693C381E787F1C
+:10A4300059F86C9DEAF3E273BA1230F3798479DE4D
+:10A44000216BCEC3FA267BAFCACFE7C10C32B0BDB9
+:10A450001C8F9793457943CDA91B6FF20E8E633005
+:10A460004732D9BD5631AFA34E47C804EF6D8EC8F1
+:10A4700051CA4F154F63BCE33B532884F9D977AADF
+:10A48000619A6F128B447A303E61071098288EF0E3
+:10A4900007E403F06E1A719E09CE5391BB18E6399A
+:10A4A000FA152CA71BF491C7B186F29E3D01B3416A
+:10A4B0000F0515E49BCC5AE37BBD7EB2B343741EFB
+:10A4C000488904B2CEA69F3F5E638CD35866701451
+:10A4D000F7DFC2EDDE8F13793B4917E9D95CFF3610
+:10A4E000BAAC8CF25D32EC76B4DB4F261FC12397F9
+:10A4F000A837DA506FD82D7E8287D41FABBB6E652C
+:10A50000889FC65DD50CE5E86F14BEFF19BA41A15E
+:10A510003C05796F436D117B1F5AB2A6EC1134CE06
+:10A52000FC7782373440B9E63D363E02F54AA6074D
+:10A530002AF17E96D6F1CCB71ECAAD09C1675FC2BB
+:10A54000F51C50A99F26712E963167FD4EE87FEBD2
+:10A5500075C37C9B704915FD1B310FA8FF3EE6C4F7
+:10A56000BC9141747A06D607F87F02CB30EFA6156E
+:10A57000C15FDC01F5B3DF633EAA23BEA32F82785F
+:10A5800053043DE0FBE9F0BE49D04D61B7C2F7EF9F
+:10A59000DD36CA9F600733895FE6DBF9384DDDE5BC
+:10A5A000D74E827915F64C24321E09F531BF093396
+:10A5B0000C787E1D237FD9587F24D6F752B48AE7C2
+:10A5C000D5E458E9FE2326E4DC6403BF5D16A57FCD
+:10A5D000FA5E22CA4D421FE9F804FB01FFDC5FC6A8
+:10A5E000B7F3A99D9BF3838FC93FCEB797B2E81FFE
+:10A5F000F65B111D87E4EF4CF16DFFA2D994D73DB6
+:10A60000D91CD98B7C7D9978968827F2B51DE0B846
+:10A61000D0DCBCDF03EB495BCB7C2D38CA626F2BEF
+:10A62000F657CA022AC2B9CC795F2BCE6FEAE20391
+:10A63000E9485F4F6617123D5D6EF715260089B435
+:10A640004EF1F99CF0AA76B14270995F6B0F63FEF0
+:10A65000DAFC81FB7A82050B806F160615718E3E3F
+:10A6600058B058138F95797D0B6CE047C7DA77CED9
+:10A67000E67A5CB66F12E74EE4F76DD90E9E5F99ED
+:10A680007D655336E557F07C67E0FBDBB22745E597
+:10A69000088C4BF928F398DF82EB9A27F856F2FDE5
+:10A6A0007CFFED64B7CE0FE8EDCFDF281CDFA145BE
+:10A6B0000AD9830B6BCF6D9FB664CBFDDE3C27C5FB
+:10A6C000B799D4479CAEA4DC9E8B7A1CE56D15E847
+:10A6D0006D8D7DBCF8CE3369D42EF3C9D56787471D
+:10A6E000CFB93419CEB9348A732E4DBB5A2C1948C0
+:10A6F000EFE29C4B53F7E71BB5F97D124E83CFB9C0
+:10A70000F4535EE3026B782F9EFF59B00AD608F52A
+:10A71000DF10E722DEC4731113A274947C5D4284BF
+:10A72000E7CDF9297F2FCF99E4C37C9336D304CAB0
+:10A73000176A4B49F669F37336B53457623D99276A
+:10A7400024CFB52C88B31FFC9C906B5B149EAF1577
+:10A750005A6427787B5476507B4EDF5318A03CB95F
+:10A76000A66C2F8DB345C41130AF74223CC3608EEC
+:10A77000717CF1F646F900FD6DC0FE2A0A7D941F3A
+:10A780005391CAF3CC3CE98192DB8AA2FDD674F3E3
+:10A79000BCBC9AC0D76FF1FCDAEA5284A7519E4B39
+:10A7A000FA32CA75A0BF7D488FDF99B8DE89CAF733
+:10A7B000C0A29BA0BFBEF7AD943FC7EEF62B1668B4
+:10A7C000F7E2BB4E1F9EA7DB501EA8AEA4EF663A71
+:10A7D000EF9751CB2236F85EFA9E751BE6EDD5B1A8
+:10A7E000762BF65767D05BAB1C6F5A913F576DB70E
+:10A7F00044E99161BEA1AF10055DC3CE41710F92D6
+:10A800003F522E19E9988DD4CB9F12296F412E709B
+:10A810007DB598EB39F6A482F19FBEE423AAF09FA0
+:10A8200049DE4D9242CA20E72775BF4DF6CA3490E3
+:10A830000FE89F29582EA6FA5406F93906F3472F38
+:10A840006389445F83EC0431AFD28179737B48CA5A
+:10A85000C5F2298CE17D06122F300ED1B3DCAF9BFF
+:10A8600084F7F0C0F33231EE9D267F5144413CB174
+:10A87000B0A910ED8820D93B46FBA7CCDE9C6487AD
+:10A88000F54D61ED241727EF7F93E424E0F92CCAFE
+:10A8900099D798C4B3CF8E72A61213FF547CEAF1F5
+:10A8A00034CBF19019E1342BCB888F9019E13ADB4E
+:10A8B0003B084F744EC01F074F7E2947985E8E1489
+:10A8C000B033FC5CF27D6FDD817EEFF9EC900F3DE3
+:10A8D000C1AC1C929F7A7B245E5E5D418EE382F266
+:10A8E000EAFA2CDC4FB894F5AEDCA90CA68B93FBEE
+:10A8F000D7AA591AFA9174B95BE4D92BAF8BBCDD96
+:10A90000D264D27351BDC8F15F264A97225D69F0C7
+:10A910007FC5AE84880AF45622DA5F8AF43021AA11
+:10A9200017232687D70AE36E547C6D6A0CBC67B880
+:10A93000BCA4FF269AFC2AD953CC978E7806BC4F2C
+:10A9400043784DB177B49A619E87ADBE9FA3BF5245
+:10A95000CEBC84F772837EA970D498913F2BEC46CD
+:10A96000FCFA09EF95CE41EF4DDF07EFC311EF522F
+:10A970007F0CC1FE04BC2FCC89B15F180FEFC1EF73
+:10A98000897723BE25DF7726382B1C18D7ADE3F94E
+:10A99000C413DF1FD98AE58CD50574CEA533CDF756
+:10A9A000067D6FE6DF4B7BFC2ADE9F58B806BE4370
+:10A9B000B9B3205081E5A6B50AC9CB491F055BB1E3
+:10A9C0003CF26EFEBD647DF31B780F595388B7DFF0
+:10A9D0007D7423DD2711DE28DA97B75760B9A98D7A
+:10A9E000B7FF2AD91E42FFBAEC60B815DF8F7D8011
+:10A9F000CF43DA75D3059D752A2FBC41EDDA79BBBB
+:10AA00009BDFB227927C1276DA34B1CEE98FF175F2
+:10AA1000BA7F7B559517E8F0A6FE9005E9E0B0A94E
+:10AA2000A18CE4651C7FAB5C69CFC3E72C900B8CD9
+:10AA3000F00DF43982E79B6E83211ECBE17686CC44
+:10AA4000D3C47CF16A0DBE1ECBE17127592FC3C55B
+:10AA5000785EF1A3C964B7CA3CD2C8CF98827100AE
+:10AA60005C23E9D73879A5B30A9B495FCE1A2EF348
+:10AA7000497BCDCB60DC92B37FB832967FFD8418E2
+:10AA8000F788C87F97EFEBC20526F43F3A9178E844
+:10AA90001EB3DAF7D12EE94C63BA7B423A0B78B990
+:10AAA000F3D19A1FB7E5017C4DCDE6100AFD7C85F8
+:10AAB000EE3DB9A68745525306CF7F96994578DE7D
+:10AAC000039FFFCA56EBB64D1A3B7DBE141B978FF2
+:10AAD000223D5223F024E5C57C812FE0EFDDC8DF65
+:10AAE0000BECCD64172E12F2FD1616A638C52D06F6
+:10AAF000FEAE777CF399C984F1303D1FAF86E970D3
+:10AB0000BDD0FFF82700FFBA47929DA8E75777E826
+:10AB1000EBD53DF2FE416E5FE9F9BC4EF27958CFBC
+:10AB2000E76038703EFFD938DA7F91E7FA12ECFD22
+:10AB30009F855874BD03FADDC07F0978CE6F0CFA8B
+:10AB40002D269E5F28CA72DC53ED5C0F87400F0BE9
+:10AB50003F8744EDA943B3C3480F25827F251F9744
+:10AB6000087D3E485F5719FD9887883F268A928462
+:10AB7000BBD4CFD00FE967796E10F4F2FB7EF2EF11
+:10AB8000C1FFC4798ED3F3CB2605E47341D45F01B2
+:10AB9000BC7D8D7803796CE7718A7686F22CAEDD08
+:10ABA000EF5813D3EE074947FB0083EDFD88CE8EA7
+:10ABB00037E22B9E5D3F80AF04B09792D08F67C481
+:10ABC0001FFF88CF21E475809C76E4C690D3D67DA4
+:10ABD000BC5EFFD6048A17C8F8B8E437258FDBD5EA
+:10ABE000EF66F95DB9B8FF20FA3F74EB2CDAAFFEDF
+:10ABF00086F969BF1AF38D7263E44BE07EF5064D6A
+:10AC00009CF4505AECB8F5F05CCEEF4B72F9BAC632
+:10AC10007BFC5E1CEF8895C7C58F248A670ADF57C7
+:10AC2000B83897C7B9978867B9781E1179D8475C43
+:10AC3000FA78BAAC5721C6F9729DDDBE412357BCE4
+:10AC40003FB335A3BEF2148ABCF5359C5EFB5E496A
+:10AC5000DBAABDAFED9ADCF22508474FA1DF9A8D44
+:10AC6000719657B85E6834F75A31BFE41A77702A84
+:10AC70007E6FF432FF0BD88FB7D73A0FE0DC27F6A0
+:10AC8000E9FB2CDCDFE84BE04F39AF6B72AB97E0B0
+:10AC90007AFB6EED25F93050AEEE25FEBF2637402B
+:10ACA000E3F6CD97DF45F9C7BCCC847F582EF882F8
+:10ACB000E2BC31E2BA83E3B8FAFB679AACB1F7972A
+:10ACC000595EB22E3E7B43378F1BDE68671B73E1F4
+:10ACD000FB92EE4CF21FEA5242A39D14C7FBEFC554
+:10ACE0005DFB86F5D0BA3695F7E73F5A4AFBB814B4
+:10ACF000F759DDFD36C9B9D5924FBAF47C522FF021
+:10AD00007BBEFD0F635C7C08FCB32616FFBC8CFA8F
+:10AD1000C91285FF6D220FA9526DA8C0B8D0A91520
+:10AD20008CCEBFDEF6AE4AF474DBB30ADD0721ED4C
+:10AD3000B3D502BEF1D683E707BC1AF981E707BC99
+:10AD40001AFF0CCF0F68CB787E405B1FCF0F68BF18
+:10AD5000E3F901ED773C3FA02D97B0E5AD18676BA7
+:10AD60006A63CEB0979F27D0B6C7F304DA329E2726
+:10AD7000D0B6C7F304DAF229C6E178EA3195E2F4F5
+:10AD800078AE40DBFEE677276621DD7425F03C32A5
+:10AD900016F2F714015C5608B8E079036D7FC753CB
+:10ADA000AE7C8701DDADE85939079F97EC5AA5EBDA
+:10ADB000AF5E6D203A64ED5CEE36C33F243FD52292
+:10ADC00015E7F1ED2E85A517E0FDE106FDD9BD796A
+:10ADD000238A9E5BC2FAF7F54C13AF2D181C977FA0
+:10ADE0003957E421E6B01C6D9C264A070E5F04D754
+:10ADF000FF91EA8B450725ECA2548ACFBCA362ECF5
+:10AE0000817DC59AB75CAE68E2F70678D8B2F4F4F3
+:10AE100090E0D5D343D2183D3D24FBF4F4903A455D
+:10AE20004F0F69FE71E7846F7A959E3E8CF09D020C
+:10AE3000FF207C27E0CD9018578275629CF72F0584
+:10AE4000DF2F72C5BE8780EFB7ECF20A87973ED737
+:10AE5000D8CBA2F649E93BCDB4496B8C7B4A384A42
+:10AE60003B41C62F2731EEA7DBF1BC6521DA01DCBF
+:10AE70007F43FD8F7C7ED8CAFD36A420949337B1E2
+:10AE800020C9A39B0CFAFF66C74356D4FF83D60B99
+:10AE90001617DE1B685C2FDA514C134F32EA7FA580
+:10AEA0005B892417E372BBA55C0E9E2563C7AF0CBC
+:10AEB000455EFCDEE1B7E579681C662FD3C57B6390
+:10AEC000DA73721E122E727C1B6B56B3909EC718DB
+:10AED000ED2FBDBF2CFD6BEA54138F96FEB1F44FDE
+:10AEE0008C7056871790DD35D129FDE29EEBF1BDC0
+:10AEF000F4878D7EE8F9F6A5E68594DE9F1744ED8C
+:10AF0000C92BC4739E8817C1B27EFB6FD0F872C57F
+:10AF10003B0CC79BBBFB220FD2CB46A59919E6770A
+:10AF2000F055E84735F5A7F3F84B50B75FF5B6D2C3
+:10AF30004BF35EC0FCF7E0B351C4D31ABBDEA67D71
+:10AF4000D4C62E1E2F60BBF47831DAFBAB5887B520
+:10AF500040196CEF37B01EEACF68DF0FA293F3E819
+:10AF6000F18E3C79DF16CF1760422ED50978C5F3F4
+:10AF70000BCC08E0A9D1FB3B811FE6E54D8AE6D169
+:10AF800066B8C08F51310FC36B8D9527C5F0721510
+:10AF9000B049973B6A484E2C6F1B1497B0123FB5CF
+:10AFA0009F7B7DD20EB81F7C377C96E67979DC20BA
+:10AFB00071CE3B7EFC5CDA93AF3DFFD164E5E70EDA
+:10AFC00059B3FE7CFEDA3C933C3FA50E65FD83E160
+:10AFD000FAFDF2F265FE01C0EF2E2DFCE43E825C2C
+:10AFE000CFEF27F53C89F1433579A61DFD5AAF2BEC
+:10AFF000D882F5871DEC3DACA03C7378293FE4E492
+:10B00000AEA31FA3FF2ED7C758EF16BCDFB66E97AF
+:10B010004AFE60DDAE37C82E8AEFEFB50FDCA32005
+:10B02000F6377E126B5E32AFB9522D4AEDD5D8E9B4
+:10B030004B851F307978E0216C57FA615E0ACED7D4
+:10B0400032A283EEC5EABF83DBC16E95CD44F881A1
+:10B05000DEE37ADF61A67D077752484D413B6E29DA
+:10B06000E3F7D0F99A7D482AEAB0228AD366DCA1B8
+:10B0700006D0FEFE74CDF2343CAF9C91BC22AD10E4
+:10B080009ED36DFC5E9A0CC514E0E74E97A5E13D9A
+:10B090002037D8F8BE7CC15F27450A81DF5EB7F252
+:10B0A000FB46DD4941BABFA03F4DA5F91C5B074BEC
+:10B0B0001B85FB1EDF4CC47B0772CE3826E07CB2BA
+:10B0C000C5BD163FCAE3F7DC1C7FF6BB89E8AFAA13
+:10B0D000671D74BE5DD29FBB30B6BFB242C0A3D164
+:10B0E000C3F3DE4F0AFBF190D86F9579F06BC43E45
+:10B0F000E0A1D103F78379302FA431C19FBA10E3C7
+:10B10000110754CA6BFFC6E94F4D23BB99E7B3AF94
+:10B1100011F6C34991F7B966F68C4CF42FE2E54B72
+:10B120001FC8E376EF0F755FA5CC3F8D0B873433D7
+:10B13000335F42F72E05CE55EFD53FAB31E1795A5B
+:10B140007C8F9737DF97A7E8F2E21B312F1E5EADA9
+:10B1500079A53C939D235FBA11EF23D7E4D7A09F35
+:10B1600086EB6BC4FBC8E99ED213744F07F683F7D6
+:10B17000869DEFDEC815621E8D984F9EAE7DCFF97D
+:10B1800039DABF9BBE3F2DE0F6F43BA6AA6D31E64F
+:10B1900099378CCBA7711E7300F7252F8EF07B3F5C
+:10B1A000E3D593E7B8E3CDAB6B46EF8D386FCCCFEB
+:10B1B0008C355ECA304E2772BE5DAEDE9501BE9FF5
+:10B1C00037BA3A595376F6E7CFD5C8D7D9023F5D9B
+:10B1D00057F5E6D37D00B3B9FF1A0FCF65E66605D4
+:10B1E000E190E00A06D11E91F715E37DC63CCF231E
+:10B1F000744E7C47E1ACEACE1F0C86B395BECBFE05
+:10B20000A4DC39FA884A72E7E807821F99DFA19423
+:10B21000A1BEE27C7594F1B8EED176FEFB1FCB8225
+:10B22000A02B407E2CDD5E3F070F1FAFDC3171236A
+:10B230008A7F7C7F37C89FA5598C4D83E7B20DFA72
+:10B24000FDB16FD903A4E7563C60D467012BCAD97E
+:10B25000950FE9EBD7B107BE46FBA0CE60F76608B5
+:10B26000BD6BB47F670C13F66F192BBB90734E8FB9
+:10B2700030FFEC61A4FFF97EDB24B19F6EACFFBC14
+:10B2800097D3C36D3BFE60C59F048AD7EF319017FB
+:10B2900023A1DF13EB9CF45C32CC5F330CDA350D69
+:10B2A0000B2EC471FA0E70389F6A38B592E2D2B58F
+:10B2B000DC0EB0E1252BF09FB6EBEDE447DF8BF71A
+:10B2C0008C019C6D366E5F48BB4A556F57F1275B0A
+:10B2D000A6FE6E451AAECFFDCCAC2AF43F3CCF247F
+:10B2E000F9111F9BCAFD2528BF37553B689F78ABD6
+:10B2F00089DF4368B7F1FDB9F0D353F7613878645B
+:10B30000C7E619E86738BBF746302ED166E2FBAFD7
+:10B310006DD398B8C79A8FD7D45DDD89F3CAAF01D2
+:10B32000790FFD6D2AF0973835FD33612F350A5CB2
+:10B33000F4BD76D14FF1DEAB9FBF43E62AAC730478
+:10B34000C5BFC6314E3732BF847E1B43132F3A012F
+:10B35000FA8769CE3F8FEB50229614BA5F8FE2D8FE
+:10B360000DEB2319D7A3FEFC25DFAF95F373BF9E2A
+:10B370003D03E3FD529F5E8FF96D18071676EF22AD
+:10B3800026FFF87E41ADA0EB45C2DEBD3E89C37904
+:10B3900019F3D1F9ABEBEC2C05E3CBD757744CA2E6
+:10B3A000FBAFEB2D6968AFC8B8773CBCC78BCF3417
+:10B3B0003E99CCEFCB51FA476327C73006521ACDDE
+:10B3C000B737F6B36398E0E7D1C24E1BC9FCB8CFDC
+:10B3D000D2B8E722CAC7B725F27D35906F76C4EBA5
+:10B3E0007ED4E7B0EE5B5E4D88F07DE3B0B81787A2
+:10B3F00085683F664F26ED2BB80BFDB4EF7ED2D2A9
+:10B400009B4FF200E49702BA73CFB04FAE31E3FD29
+:10B410002039604741F9F82F0E5F83BFCFD238A2A1
+:10B420007725DE179EFEF8595E1ED77B18CBC31E0C
+:10B430004FBC96CA137A57AA509EF278D6B5D41E3E
+:10B440001D2820ACCAC7875F8BE7FC8E89F825F3DF
+:10B45000F5D23D418DBB2F3269E38325F95C4E1F48
+:10B460004BE0F58E15B0257311DE637A476B7F379D
+:10B47000C1932FED526E97C975CA762C2B76FFEFCC
+:10B480000B3D708BB8DF677A126B4BE0FB1521B474
+:10B49000AFDEECBE88E0F2C2309780572FDDDB28AC
+:10B4A000FB319EEF97E3AE42BD8D72DDA23F4FF4BC
+:10B4B0001BA12F609C0D344E91BF04EFE5699C9B4E
+:10B4C000578278037C9905BECCDC0FDC4A78C67EB7
+:10B4D000D38A498F4CC43CB137CF40FD82E8BC8D44
+:10B4E000F471588C734B2BDF67EA4F2B243A9A9EEA
+:10B4F000C4ED3F560AF003393645C0AD245F9CE3E6
+:10B5000019C043A642FDB70AF8E5F1FA17BADED32F
+:10B510003FD07A3578F263DEF19BBBC6129EA60C53
+:10B52000D0C1665D3FC75A0CEDA6F0BC94465721CA
+:10B53000B5BB57DCB32FEF2DC67605D06E7A45FF2D
+:10B5400044E407796F1B0B4D2367BD41488B817B1A
+:10B55000D83A787E0A1BE9E7F711CD9D532AD6E742
+:10B5600014EB736AEFA51BE0C38FFAF36B34F75249
+:10B57000CBF703701FE8AF6882E84FC7CFB1FA433B
+:10B58000BE88878F71F97F617CC8791AE0390067BE
+:10B59000C3FC243C918FA95D919E9FE43C87E59B71
+:10B5A00084BF6DE0E782EF399EC8EF5FFD37221F51
+:10B5B000D2ABA7E7D55D0526DC3F95EDDA3A5A0216
+:10B5C00028E765BCDBD6551D42FDD7D45D4E799B7F
+:10B5D000AB7FF5ECCB2168BFEAF987533099F6A829
+:10B5E000B93D03EDDC861DF7A4F871BFC41C4A41C8
+:10B5F000F97934AC56C53A0F181278907654A3D026
+:10B6000037C79EBEFF1A84C77FECB038518F363DD6
+:10B61000658BD8280E720BD95150FE9C97EFFD1AFE
+:10B62000FDD2A65D7A3B69D53F3C9CE1257A0AE5CF
+:10B630009AF08C0B8BE43278366EB7F8226E1E4F80
+:10B6400084615813EBDF88F333B6C7799C06BC37A7
+:10B6500075A84BF13CAFF13B4812B2C39ABAEE2742
+:10B66000BBAB491B67003CD4C5B1BB6ECDD7E75B14
+:10B670004BB8B0B087EC9AD65FFEACF87307DEA784
+:10B68000F94F294A91565FAE27389DEA58FEF7BB1D
+:10B69000BDF1F5EA49B40B6CDA761CAFDE5D0AED5C
+:10B6A00049B06EFE6CB04452D0CF6FD86AF181E6DB
+:10B6B000650DCF3EF124EE87B04F6C74FF41FDB3B2
+:10B6C000FB3FBE14CAF59D16F71C3E7D879211C53F
+:10B6D0004F9397DB27121FAB5EDC4FF70CE27BB476
+:10B6E0006B255EEA3BF75AD9F8C1F0ABE8D82B7E60
+:10B6F00077C1809F8ECFAFA4FB3C7FF99D15E9FAFF
+:10B70000E81E8565160C6E5FB7757F0AD21FC209E9
+:10B71000FD4B89A701BC0DC257E49ADDA5548FE209
+:10B720001AF1F036379FF178D0AF9E7D0E7F07B0CB
+:10B73000EE37361FAEBFEEB9DB53701D5F999B39F4
+:10B740007DFFE29E0C3F8C5B67096538E9C9DFD756
+:10B750003D7E07D1DDCD07EEC8E0BFA7E1CF364D76
+:10B76000A17566E3FA6E7A6C3EAD6F250B12DDD5DE
+:10B77000FD82C727BE15BFC760C4E769C11F5F6DE3
+:10B78000B3E18F64B0AF30111DF3083F50459EEF19
+:10B79000AD4C7B8F0558DC54FE56C407DE1FD0032A
+:10B7A000CCCE3471D9A6EDF7F6207E8E0DF367E28C
+:10B7B000BE1AC02124E0A5E0FDBAEA81CA4C8E1F62
+:10B7C000E635CBB832D8DF15F81EEBF758FC09C5C3
+:10B7D000BA7662BF9E8F2FE31330EF44DCF7FB2A6B
+:10B7E00023F6B9ADD1C31521DF580FD3D2573C7E14
+:10B7F000DF7E1FD1D5371F71BE690C5757D1F71E99
+:10B800004B048F163786F7D628240F6CBAFB9F0699
+:10B81000E862BB45F0B3FE3BCCD3AC68E1BB87E745
+:10B82000D5AE7CC8A6BB0F214A37D6E8FB82287F5D
+:10B830004A3FEA66C1FFC6F51AE5C11F0CF2803D1A
+:10B84000E619D2BD320D96F0938F22FF02BFA29F60
+:10B85000D9F0AC85FCFCE33BDFF8F83AA0F3E31D3C
+:10B86000926FF572D5C8B7752F4C62B1F8F6B8C3B0
+:10B87000C762F22DBC8FC9B78EE83E8D97FD7072FE
+:10B88000F5E63872356FB8F11C4B512AE6BA1F7BCA
+:10B89000BA7E38C5050C7095FEAC515EBE9CEF8D2E
+:10B8A000292F195E41A581A3849FA4C755CFACA6BB
+:10B8B0007106E856D2A5A4DB01BA1C945FA983A344
+:10B8C000F1FB17288F2645F16E590F7E0ADAB1AFCA
+:10B8D000A9F43B287D30978D00F7BE9D05B40F7A03
+:10B8E0008FB0F3FB9CFD2918D7BB47F815FD184F07
+:10B8F0004C8DBEEF4F10790381FE94348D5DF47949
+:10B90000B79A82765C6F38F6EFC9CA7B2A7BE3FC74
+:10B91000DEAC3CBF54A93AF2D7629CB69DEF4FAE65
+:10B9200068599882F18CBEEE42FA3DA19BDE057FFC
+:10B9300017E6DB27E39A21BF39BB2C7ABFE9111642
+:10B94000A2FDCAE5DDF5B45F688C83AC74D4A4E2D3
+:10B950007EA0310E7233E641611EF263FAF7AB301E
+:10B960003E827832D05310E9297B303DAD1C2EF653
+:10B970005F4B58896EFF55C8B54AB5E8A7689FF474
+:10B9800081DF8EF120A616FD1AF5E9B7E8C723037B
+:10B99000843C44A7F5C12332CF8AE85AD29DD17F97
+:10B9A000373E4FBCF469199E076A78F9DF8A7F0E2B
+:10B9B000CF132F7F32FA552CFFEA5FF3FF8D0DAEC8
+:10B9C0005FB1E78FE4AFF4EDB1D17CFAF6BC9D7FB7
+:10B9D000179677DB7C38DFBEF536FE7BD07B92E9AD
+:10B9E000DEE9BE613CCED6FADA77C5BDA4A7361033
+:10B9F000DEFE6E38BF2FF654F77F7D86F7AB9EEAEA
+:10BA0000B67931EED0B42789FCF0A6DD09744F7CFD
+:10BA1000DF6BDF9569E345FFDDF5348AF3167DC9F9
+:10BA2000AC16F35BFAD2B8BFD6F4EAD4275A0AD0E0
+:10BA30002EDD4BF71657BCFEA762943F7D2F70BBDF
+:10BA400002FCF3C77113F117C3BB7F6A998AE78DB4
+:10BA500018F9D553BD7FBA36E48805170E873E80A6
+:10BA600003AE0BE042F775C78347D7707E0FFFFF29
+:10BA70003E787C4DFE4243F764E2A3285C14FEFB53
+:10BA800023DDC961BB42EBE7EFF77C578C76D2F13F
+:10BA90008E16D2FBE75BF787FF6BE9E0FBAE5B89B5
+:10BAA0000C65DDA7FED7AE9BD3FFDAE15C3F19F949
+:10BAB00060309DFFEAAFA9FC5CB28FE66BE0FFFF50
+:10BAC00007ABA359F3008000000000001F8B0800A3
+:10BAD00000000000000BCD3C0B7814D5B9FFECCC76
+:10BAE0003E926CC22604084260F2244A1E0B791072
+:10BAF0001EA99B842008E206A4A2222EF8E015923B
+:10BB000008B6C66ACD622202F5B6516CAF6DD16F30
+:10BB10004141DADA6B8A41B1025D10115AAAAB8257
+:10BB2000A246BA52AB50031B41052ABDDEFFFFCF30
+:10BB30004CB233243CFCAEDFD7E423C733E7CC3927
+:10BB4000FFFB75CE18498599ADB9004DDB4EE587F1
+:10BB5000B1056806280648526D00FD004E6CFDFADE
+:10BB600090944CAD5D853480BAED710045D8FE31BE
+:10BB70002600124064DBA9129F13E01BFAB912A041
+:10BB8000A3119718D6DD37B71D9B3F2CB917A7D443
+:10BB9000BCF041FEAFB1ED78E1BDEC97A9FFE2BB8F
+:10BBA000433EC0B6D606BE565C2F120F3337213C3B
+:10BBB0009144F000EE5FF7F2E8A796E1FE8BDB3EE2
+:10BBC0009F4DFBD76C1D0532F62BFFF4EFFC30CDFB
+:10BBD000DF2479C4F3F88003E1AADC7E463CDF7EF3
+:10BBE0002A1FB0FD6C93149413B0FF807D7E80D625
+:10BBF000ED05EF118477F17F22DE3B6CB7E278C36D
+:10BC00005095E1EBC67B870DF208DFBDB3697E641A
+:10BC10007BBCCB9E46F0FD7B0844E17F21BCBDFF91
+:10BC2000B1FC3E3FDE007E86DB2A7B1DE908DFC3D8
+:10BC3000100CA9D83E0830B1D5792E3C3FA6C16280
+:10BC40007A0F42D01F4006F123272F9C0209D4AE61
+:10BC5000FA5CCEA7F7A74D4C4338FCAAC5BD5EA53C
+:10BC60001916A6C38AC1EEC02A840B14EFFCB5D8FE
+:10BC7000B70EAD71AFE215EE042801F881435BAF5A
+:10BC8000FF948912AED7B40CE1C2759AFA595C4D93
+:10BC9000B88EA25A82F67C6E3FA2F6A1FE57EFA1A3
+:10BCA0007D15A70D82DABBDFE03F27603F47EBE35E
+:10BCB0007EB199517DFC17033B5D0AEE1FE35620D0
+:10BCC0008028D921EA7D9C7F93EA62BAC442C0EF02
+:10BCD000725E3A9D7E4F83FD7AA793993E3ADDCE00
+:10BCE000A1138083DE57E8BF08FFE45521D2430546
+:10BCF000147F58E0237D23113DDD290E5CCFDAE768
+:10BD00000EF72A899FAB4A89F69E85FE2C31D01703
+:10BD1000E9E789C9EFA673D47A8CBF99CE974A5FB9
+:10BD20009D2F31308DF91C33D8E90E20FC0FAA82EB
+:10BD3000EE0F22DD25A99BBE3ADDCC7CF093EC14FE
+:10BD400077D3BFBB1DE7FA64383312BE41E2FA2B4A
+:10BD500020A71ED7A992C785FDB8FE89D238B79D06
+:10BD6000F44582A03412DBF2FE15807874A4DA1454
+:10BD70006ACB3A11A72878AF3CED00250ABF72487C
+:10BD800034F43B52B3F9FD4AC740C37B1D034B1D3E
+:10BD9000F4BCCA956698FF464C423E14D07B1326ED
+:10BDA000D2F85529971BDE9B7AB863CD1C6CAF95F2
+:10BDB000C245241C1D7B675510BD26A9230CF3B674
+:10BDC000A059217DEEAC9203EB901ED552B07F3E80
+:10BDD000D26D72CE68237C128C273C6B2C285A388B
+:10BDE000EF1A77B961FCDAD2498675AB3DD5867E0C
+:10BDF0004DC357A0F40518DB70169442B4E3C15646
+:10BE0000C3FB857BB618E627EC03391EDB11FBD597
+:10BE1000266A0BDB434924BEB6BE0EBFA50F8A704F
+:10BE2000D85B89E840C991FA57A86D70203DF0F9B8
+:10BE3000A918D122BF58CEFD8762024D08EF294BC9
+:10BE4000C04774B85B0EE4501B3BE88E7C48073853
+:10BE50009AF2B0DC87E0075FA78A7230FA8B401352
+:10BE6000F5AF3CDB2AFBC80E6F94FDB602E2FB94F3
+:10BE7000B8BF92DD6D9580F85EE3B47802E4B792C6
+:10BE80005AF39746C9D7673F845BBCB9E7EAEB8BA7
+:10BE900059E596345CBF39C5D3B283EC66C587B328
+:10BEA000E5F473E7814BE90CEB7449A7F7BC4583D4
+:10BEB000511EE5F8F10EB2EBB19532E30557590387
+:10BEC000EB719DE516778CA6FCEC5F5D13AC6B49BE
+:10BED000AFD7A409FB10FB175025843FB6AF4FCE58
+:10BEE000A3F77E26C17AE8DEEFD652603CB2D22CB0
+:10BEF000420F1457BF9BF3E8FD787EBFA454D011C6
+:10BF0000A6580259B864C241F76E2BF657E7EC7792
+:10BF10009119689B72D82F235DDA0E86CA24D4A5A6
+:10BF2000010F979FCC14F3210BFB6D39E3E3F2D89B
+:10BF30008FE558C8CE2C41B347766647D93339E4EC
+:10BF400027965C7EC500E8C1BEE96DC26909D4C20E
+:10BF5000EEFE9A3495E14A50C2407A9D705AE171E2
+:10BF600068C8B690FDD1D74F98A5BEBB94E0D86302
+:10BF7000852CDA5EF12C223C565DD1AEAE623C04DB
+:10BF8000DE00E1142FA2FA4FF4932A315609A7DC00
+:10BF90001C7F2E1CFFDC589CA8221E7DCBDD896EE9
+:10BFA0006A7F8F441FC374F7131D7E4A7F2EA3DE62
+:10BFB000DAD0781CDF4836518C0701E57A954D1BA5
+:10BFC000279382FDBE9236EE5FEB1D4F7C958DF37D
+:10BFD0000BD2BBE67B1C29DDEB7BD7AE0D35F748DA
+:10BFE0004F3BFBE55513AC01BB7431748DBB005D59
+:10BFF00013045DCFA2F5C77DEE72887D3E96D421F5
+:10C00000246FAB2D68053200F6BB7CD7935CC7CAA2
+:10C01000C13C7A3E37C133A00CE5AFCDE619720FB3
+:10C02000D9956D31EE75F85EF59D9F3DDE407A3D08
+:10C03000F59F39CD24378A276E24EE53E7FA8AED2F
+:10C0400041959CDB87E29D2E3A923CE39E3FB5747E
+:10C05000F7C93E2474D3D59389E3ABA2E8EC709082
+:10C06000FD12FD47D3DABC4CA7DB1C4CA7A59A4EAA
+:10C070003527428B05F5E1A46BC3F7491E4E6EB41C
+:10C0800002C54D6D3448FE32C7C17A05C9E1946AD4
+:10C09000D483BC372D5E8ACBDA513E3C241FF5D9C0
+:10C0A00086F54E8E7B37290FDF3B99AC24117D1628
+:10C0B000866D4CB79B1508DAD15EB625DF5659CE92
+:10C0C000FAA1F278ABB6CE6B599EFBD2D8EF8C7743
+:10C0D0007D8278499E31F237C37BE71779D04F7460
+:10C0E000FB8874AE2334937A9783E6724780E2CC60
+:10C0F000BAD265B9E41F9624660F00C4A36EBCC40F
+:10C10000FEB6AEE10BA6BBBEBE725A06B56F777F18
+:10C110007C86CAF640513C2C0FCA691B8FD7349CD1
+:10C12000643B8EE0A491DE742C13F6AEC50AB754BE
+:10C13000635BF3BFF22DD538BF06430CF617B0D3BF
+:10C14000B624CA1E42EBE75D76BF0079B77ACA5BB8
+:10C15000B16467AB25D70C401C8EA6BBAA95D1D87D
+:10C160008F71CD90B0DFB6EE8C97FBA9AE1916ECAF
+:10C17000EF4ABB498C0F74FDDCE206F87CDD5DA262
+:10C180009FE63A40FD0FD31EA95606623F5EC8C126
+:10C190006FD26AABFDB9245F4EA6CB891571AC1F77
+:10C1A000BDD1795EC3CB06BA9C332E4BB778C96E2E
+:10C1B000CC1476F1D8CA416B391ECA0C65D39E5B8C
+:10C1C000D344FCDA1F79538AFF5E45BD77201D9268
+:10C1D00033C063C1F9C92FA23FA2F91F878610FDA2
+:10C1E000E6BD181394901F8B9F78C546FE68AEACD1
+:10C1F00066935EBD3FCCB793E4E3787C88FBF31A8B
+:10C20000B6335C29592E61A75D9DB95E94CFF9D0F4
+:10C2100062A3F1F9A01C26BF614161A6B866A173B3
+:10C22000978DE2B2854F5B0F87A3FCEA22081F229D
+:10C230003DAD79D67A381CE57F81DE8F92AFC3168B
+:10C240000187A2D163AE1C9A6D13701D20B816270A
+:10C25000617C2F93BB08F5F7715C5493C379494A0D
+:10C260002C90DC2DBFECFD7C5F0F7EB0B511FD3E48
+:10C27000AADCA6C62DDCAEC135C9EE0C50C23637DD
+:10C28000AE53ABD9E592D0611B44BD7F42A36B9FF7
+:10C290002D128FEBF6A27B3C5ED025D733C2827085
+:10C2A0002C9EB66F1CF145E7E79571D01A93C47CBC
+:10C2B000716B7C71135F74FA233D0B157C6FD7593A
+:10C2C0007C2FAD27B9D0E92FE06D8B15F6A27373E3
+:10C2D0000CC74D66F8E3D205BC3A1E43D3CF0FFF1F
+:10C2E000D0F4EF06FEA1E9428FCD78E87AAC3FD7D3
+:10C2F000F5D88CB70EF7A5CB59C8763172A6DB9965
+:10C300005AF0E5D0FABA5DD1E9ACC3A9D3AB8DF24E
+:10C31000A11EE0541A5E32E0A3842A28898071E9C4
+:10C32000E9C28EB54E02E283D2B095E75D2A3EBAED
+:10C33000BDED0D2FDDCE9AF1D3EDAD8EA76E7775E5
+:10C340007CCBD090B03DC4349EF2AC2B4FFB0C7133
+:10C3500070392C30C4C9958E3B0DFD2AD73D86F926
+:10C3600057A52C338C4F52571AC627E73C62E85F1B
+:10C37000E3FEA5298E5F6B8AE37F63181F170E719A
+:10C38000DCFD7AE344509047DF3BD2C9F177B0D16E
+:10C39000C5FD9D8D29DCEE6A5459BF7737E670BB29
+:10C3A000A7D1CDCFFFDC58CAEDBE460FB7A1462FAF
+:10C3B000B766BB30F5F9EB15CA574A432D9564CAE9
+:10C3C0007764F87E928EF47BC312688A473A8D6A4E
+:10C3D00017F139CC37FBE35387EE25BFEEB2B9C96D
+:10C3E0001F36EF182DA93DC47309E8EF3C51F292B6
+:10C3F00030250C1E8A7BD03DF7245F2DE916964729
+:10C4000032FB807A37D301D664D4B79933257713BA
+:10C41000F0733F24711BF4E1F85405FCE4FFAB9D7D
+:10C420004AD09EC0A0791D08E70C0126D8699CFC63
+:10C4300077725F85E2D6EBE821C22B7B64F81E3E63
+:10C440009F51FA97339437DFE86CB5929CDCB0E7E4
+:10C450008163F7E23834FB8B493FBAE206FFFB9673
+:10C460004B891B5A28AE443A462477C843F14EA262
+:10C47000E28ECE07F4F6B674910F4C6DF2CB0948FC
+:10C48000CFCE3781E3385D1F11BF1504BFAE17D57E
+:10C490002E25382C81FCFD239534BF66BFCA74D18C
+:10C4A000F542D7033D0FD4F5A04A7EB689E69F3802
+:10C4B000089C4F8FEAF01D799EF034C59DA59D2DF7
+:10C4C0009594975D286F1C73BAF5159AB7BDD1C7BF
+:10C4D00072B4B57126B7C1C6F99A7CD6737F57631B
+:10C4E00003F77737FAB9DDD3B84293CF161EDFD7FB
+:10C4F000F838F75F6F0C6872BA919F8FCF10FEF714
+:10C500008B50E50092BF17D3451D071CE59C478063
+:10C5100022DA8B95939A9497453C65920FB35CE829
+:10C52000F200683724A4D78DE867C93FDC04FEBC5D
+:10C5300039D8CE9CD7621D2B7D7BB958E86CE6F8C4
+:10C54000C36C0F174090EDDDB9F65DC4FF17B2EF75
+:10C5500032E6ABE4AF74FBB718C2BC9E5DBED34DF0
+:10C56000F594EFCEAFB834BF0273687E57DE1DDBA3
+:10C570003E5BB65C38EF2E1A2CF8AAE7DD183F02B6
+:10C58000F9E54840E6B87A7E5A4B02E7DDA59D09F9
+:10C5900014072CD826333F30CF540622DFE6697CBF
+:10C5A000EB80E03BC49779E3E6715D6EFE1A233EB3
+:10C5B0000B9DD7F509AA3DC6693DE2590B0F7F4E89
+:10C5C000F5B95A8D5EFC1CE16968BF61D2AEA879ED
+:10C5D0003119F1C99FC49142C128A207C2EF0E923E
+:10C5E0009EED9759CF7A938BE3989F909C9F6A9C7E
+:10C5F000396917CAFDF1B38D9C7F25653CF2887FB0
+:10C60000DC77C7AFB559DEA1199C0F856DA43F3A01
+:10C61000FF96938D44B8975738029468478A5D0A0D
+:10C62000ED1F913C723CF1E323702F43FA956F7D2F
+:10C63000ED20E947B9C3C9E708884447343F47EFCD
+:10C64000F7353971DEA87D1E99C2F7E25DE1269AC1
+:10C65000A6FB1BDDFF8CEDE8947D5C17C8643D02F2
+:10C66000CC25BEC9B8783D32E79B4D946FA2413AC4
+:10C67000E99CC0F09E0C829B9E77D7B544BD69ECC7
+:10C68000598F9C80F02DD7F2C3D11F7B198E6A87FA
+:10C69000CA7268D7F2497B8A053C517474D97C1BF5
+:10C6A000A9FE097F8CE13AAF19BEC919C28EAB4908
+:10C6B000DEC94C5FA79A4D794395DCB1E1D7240FD1
+:10C6C0006D716E3BBE67B6B7BA7DEB2D6EAF739DD5
+:10C6D000EC318ED4DB3A8B38371859A91652FE4705
+:10C6E000F125E5857A9E689EEFCBAA989DD18FEBC8
+:10C6F000AB210FC1E5B29C574EEB1A3E3F6F9EA691
+:10C70000EF5FB7ADD83537AA0EB226433F5F505C16
+:10C710009F38BAF976B1FC2DEB9C69F03FFFE9F147
+:10C72000DA540C7324D4A13C2920E20810F1C42C63
+:10C7300008713B1B3AB9F5A124513B17DCDCDE063E
+:10C740005E6EBFCEF4AD26B989583BFB931E1F7BAE
+:10C75000E1EB5C928B63DF1BEB4A53BBFDABEE6FEF
+:10C760002FD5AFC6D2F9520FF2B041935BDD6EF711
+:10C77000CA1F93DD8E8C40FB807046368B73B148A8
+:10C780007C6C80CE0174FB007E63BCA8DB8BC2593D
+:10C79000EE37B85EB84FE6BAA5D97E5429228F0786
+:10C7A000C59D43F5517DFF260BCC2739DB88ED1F56
+:10C7B000108F3EB3C28A1A85CF760D8FF21BC60347
+:10C7C000E52F535D223F9CEA80E4D364DBCE9ECC10
+:10C7D0009D8186602AC5A328CFA3923C7F227AFB45
+:10C7E0001F1A97C8E70F647F8622FF3E12E736B014
+:10C7F000400A64213DB6B4897EDEED898CDF4D10A0
+:10C80000643EDE0C612BE17F0B00DBDD39A0727B27
+:10C810002B78989FB8725C3EDAA1DBDB9491AB1069
+:10C82000CF82A4CE74D2CFBCD1EF254908573EC5E4
+:10C83000BF4EAECDACA03845C7C39229F0B82CD3BB
+:10C84000F336C15790145AB59AE2C2CD16A0B8F08B
+:10C85000D3D1F7DC01517EB524ABE220CD7B4E1263
+:10C86000E785FE6D76515783CEFEDEA878FCEBCCD3
+:10C87000CA43A4F7FF20D838FF5DC5E748D52E414D
+:10C880007B18DF8F6980EF0DF1E6F5A49F7EB68FF0
+:10C8900005444B5127F44329EFCBFDAF9EFAA2BAD2
+:10C8A00059E0E3A778AC24CB17A1FD0A6C680A090C
+:10C8B000FE27EC81751C37D50FA1FAC5BC27ED16F4
+:10C8C000F2E3EFA11DA673D30F1A1DDC7E88F90DCC
+:10C8D000B57FC3FC86DA8F30BFA1F6EF98DF507BBF
+:10C8E000FBE9112844003FCCF4FC6FC679F0E8DD89
+:10C8F000CE083C2212CCECE9BCEF5486C83FF2DBF8
+:10C900003E7E208EE4608BEC2639CDDBAC701DE2E0
+:10C91000F8D65101392D9AAEBEB84C84237FCBDBBB
+:10C920008F8E2DA2F7149784F38F6F39D99FF3263A
+:10C93000137C5DF4D86613F4D0E07D2E31B48ADE2A
+:10C940007F6E733A41887604841C123F7BA8A30152
+:10C950002C633EBE9E21E2A76BED9D45D1E79B4037
+:10C960002103D52B353F53259F4D08E76A75DBD151
+:10C9700024D7996FD07EFE3D420F91AF86BA44A571
+:10C9800026877A9BB7CDE6257D7A6EDB3BD32623BF
+:10C990001DA68E99542CABDDF30B33FBF1BE79A3AE
+:10C9A000CFFC6A7532CFE7738B1B606D950BE7DDAB
+:10C9B000E4D8F12A91E066D7475589D8BF2545DAF2
+:10C9C0004DED1C356D4212D90108F03EB7E694EFEB
+:10C9D00026119BE2AEB6915F2E27A58AB2BB958E3B
+:10C9E000383A49EDEA57B9FA1AFA57A50C32CC9FF2
+:10C9F000A46618C627E70C378CEBFB4E71171AE6B6
+:10CA000091BE52DC8C7830DF61BDCCE732799BBFC0
+:10CA1000787F11E37F4311E11F41FAD930B03852DA
+:10CA2000BAF217ABC96C6CDE99C0E7B4A6F8B4666D
+:10CA3000DB53BB3D6AEFF1E997B0B5C7B8AEB69727
+:10CA4000B8EE62E353B41F8F92FD2878E13A3E7747
+:10CA50007F6EF499CB54C4CB9789712BD93D53DCAD
+:10CA60001AD1E256B3FC74C9A9A40AB9D92B03C5DB
+:10CA7000417AFC6A961F800734FF2FDA4BD5F3A961
+:10CA80006F097FF50FD2F7BED172ADB5A67A44819A
+:10CA90000DFD0AD509FF2AC33A7A7016E1D0E99F45
+:10CAA000D12DF770DBDA570716F1737F3C6E59AB67
+:10CAB000D5277E95A99DF3D7EC78756072F738DCA1
+:10CAC000F591613EDC27ED36F49BD38CFD87CB7767
+:10CAD00047BFDF9B1D9AB7E64E9B8FEAD28F893AFC
+:10CAE000A5795C87A76A678C87ECA5B2D5CEF9508B
+:10CAF000ADCBC3F513A597FA896E176E90A1BE272B
+:10CB0000FBB65E5B77CACE1890BFC5BAEFA1AC107A
+:10CB10003CFE17859F79AF8F07BC51FBB4668AB87E
+:10CB2000EF5862CB8FBFC279C75E023791FE58A221
+:10CB3000B0B7F96D9F5A2CE4276285BCE4BBC2965E
+:10CB400024BAEF323FCE4FE7C9750BE2FD746E5445
+:10CB500090DEF98E0359BFE569DFA30E94BBF72D74
+:10CB60001683DF8990ADC3FE8E4CDF34F23B9377A2
+:10CB7000C6042DDF029F1D9920FC5A85D0F7D924C9
+:10CB800037FAB9189A9ABA07C1704E46F853FFCCD3
+:10CB9000D3B7BEF518C5BD7B85FEE3B0D39C8FDE51
+:10CBA00014958FC21AA1BF0EFCA53867E1AE161B03
+:10CBB000E549DF95DEB7673ABBF57BD8B9FAACEB50
+:10CBC0007BDD01A1EF27B67EF916D9F513E8EFA2B8
+:10CBD000F5BDCB2F6A7A5EF7B8CCFAA83F3FBE55B9
+:10CBE0009E18E881BEAF697200AE6CC3B9D992B22B
+:10CBF00053D3C8AF2DD9A6F079606FFEBA6E85F118
+:10CC00009CECB9EDF6F9E21C59E011D1FDE9B62F23
+:10CC100093CA7345BB8CCF6B5B34BB23E218F4A380
+:10CC2000D664F2A3D512D7DF0E6C1BC0F7330E48C3
+:10CC3000105447F212D739906FD3C572F4DC49F122
+:10CC400018A4E428B4CF348D9FD3B5BAD08C6D33FB
+:10CC5000B2885FEFB4CD3DE021F4B232587EAE072A
+:10CC60003FC7830712BDA9744F616A9390EF038990
+:10CC70009D1D54473A501627D17914AEDF1C1DEF85
+:10CC80001DB07A53EB192FFD7CF20AF99BB84BC803
+:10CC900083357B88FCF44B229F63F957063ECC72A8
+:10CCA000B50002BB3DB86FAD3BC871E9221079BD3C
+:10CCB000399EAF1DF7998DFC8239FF2CDFB2E3203E
+:10CCC0009D7B9C538730C9EB85EA0EE6BCB7B7FA6B
+:10CCD000C1A8246F615654DDCF1C9F77C5A17A1C73
+:10CCE000B53E8ECF855E29FBEFE38BB07FD7FA3858
+:10CCF00017E5D9479FB4FBC92E1F5D670F48387EE3
+:10CD000034A9B39DF28EA39BF2DCB802CCB3A8BFCA
+:10CD10007B96FCFA6FAD2C1700C67B0D4BCAEEE676
+:10CD2000FB7F4BD6C74B740F0752C4B89EF3C9CFD5
+:10CD3000C4735CB0E0F9817CCEA9FB17D20F3A979F
+:10CD40003EF2448C8782FCA37BA6F7A17A5F87E53D
+:10CD50000F7C9E0FF27D87E8BC7ED186F891143F50
+:10CD6000402E30DFE6AFBB9CCF377FAEF86610FEBB
+:10CD700095CF5C3380EE952D78BB1F103E91ADCFE3
+:10CD8000F3F95F779CDE737C77626B461FC8EDA674
+:10CD9000935E075CF1F4322FF1BD5852C5390DD4C2
+:10CDA0007B06915C6CA9065A77A42CEE8D76AE8C2E
+:10CDB000E3B8D42C773559220EACD1EB0D7DC1915F
+:10CDC00042FAE303A64364E5F075741ED69C95A46D
+:10CDD000F9E9CEEC6951F712ABE4F6DA97493ED7A0
+:10CDE000D8B90ED211D3F33958435622CF9FE7302A
+:10CDF0009E9BD7369C31F67331BFC3F74736A98562
+:10CE00007762BB54A3FFEA54EFBD59F8FEC2D64780
+:10CE10005ED8C77459F3C3F769DF3D4E517FD927F8
+:10CE2000E8678EFFE739449D03602DEFAF3FFFF4C5
+:10CE30008977F97CF5D3CDC3B3C5B971E8935FA702
+:10CE4000F179F1A17BB1DDB4E72DE68B19DE73CE6C
+:10CE5000FD2489F1AD213CFAD2F9AEF71182131904
+:10CE6000C179DBDC55794C3FFDFC2D72B4E7FC4405
+:10CE700087535F5F874F5F5F9FF76496C863666BFA
+:10CE8000F9C1315BE8389FA3BF305CA2FA5ED7F3EB
+:10CE9000A4507E6294BC7C57F5F41BB57AC841CB94
+:10CEA000B21FD8E89E5CEB6AAB2FDAEE5D621DBD67
+:10CEB0002B0EF480EAEA2F5C09FB2D444EE94FE784
+:10CEC0007D5A9F9401FBE334F0248287EE0D6A2D96
+:10CED0002CF4A5709D9CD693E91A6280FB4DE56EFB
+:10CEE00095DA2B25AF22EE7D0558FE2740FD60C266
+:10CEF000C3E208F3B9987ECF6546E2F26BD270BF09
+:10CF0000E67EB09CE29866ABD00BFF9C38CEDF7417
+:10CF10003AE97E065CB906FFD2EC0255C175662A75
+:10CF2000B0C29A24E60D453A1FD833F7558A13DE6E
+:10CF300055EAFBD1BEEF391FCB932C14DF05E22954
+:10CF4000477CFFADDF16FF15E77E009E3227CACF74
+:10CF500075AF39D8EE9BEB11B7838FFBF3206CFDD7
+:10CF600002DFFBDBE87FADDF09DD78FD6DCC579B91
+:10CF7000293FB829F181627A5FBF8769BEEF77D414
+:10CF8000E5E47B81E67B7FD782EF33B25BA72CBEE3
+:10CF90005A51FFA81F45FE3792680309E747FA690F
+:10CFA000F438064C8F88557BFF7395FB459523B964
+:10CFB0001E09A754B6C7634DFEA668B845E461DFF5
+:10CFC00088F9659D8AC1DF141568759BAF558E4B36
+:10CFD000AF3CAD9CD71F3D942DEC59515F4B7D4F1D
+:10CFE000F1A19A2DF4A70982B2C047C40963BBE43A
+:10CFF000CA2313FF6AB57E2DF93394A74882C34F25
+:10D00000171DC76E15F2355609EEA016AD2B34501C
+:10D010005CB105FD9D0E079D11A60C673918A3CBC9
+:10D0200027AE350BE72D97EA396F71503C83ED2A17
+:10D0300029C4707C0F3AB9F5687EBC02DCDC8E072F
+:10D040002FB7289FDC4E84166EAF86566EA74048D9
+:10D05000F8FD2B824DECCFE03E179F5B4C9A67A109
+:10D0600078A3E8FA9EF3850A8D4EBDD30115AEE490
+:10D07000D2E9300150EF327AA0C7E01CB61F667AC1
+:10D0800098F5B30CC232EB2719860CAA13A8ACA7EB
+:10D0900095E0E17ED545D2A134EC53B84E63A64766
+:10D0A00065CF723159A3C7BFB281E543E7D3FDD93C
+:10D0B0002A3FD7F9857A9542F26FE6A3FEBC28AEE7
+:10D0C000E2245D4DBF237BF874BA57555458B19490
+:10D0D0004CF2DD1BC64CA77B5545632B9EA723CF87
+:10D0E0007BB2C7897E4145A1D58D598B54367D3C95
+:10D0F000CEF769F79261A688AFEFD2E216DFB21FD2
+:10D10000B85DA827BE54A79BF07360704FF759E431
+:10D110000C713E38646270A715E71D527C73B2290A
+:10D120003E70041354A4FB5DCBAAF8DEDA4336311B
+:10D13000DF6E1775581D2F7CEE8FC1FEA64DC3976D
+:10D140004AE9BDEF8FEBD6D2BABE65597ED257DF22
+:10D1500066C92D3859316026EA6747C80A540FD589
+:10D16000F7C94EF52DCDE673DD6CAE930DD2E29985
+:10D170008E4DC387135FEECFD6EE6125A71512DD66
+:10D1800096A57AEFA7F99178215FF76B7CE8ADDD82
+:10D1900090EDB92FBBF8DCE7917F2000F8FECFB20D
+:10D1A0007D0FD07A757167D9BF1F1FF1F6F2705AE3
+:10D1B000B79C4AC8A459887793070236F603DA7DEC
+:10D1C00075EDBC2A723BAE837428F2FA9AC8A48D1E
+:10D1D0009AD55942F613D7FD2F5ED7161E3202DFBD
+:10D1E0007B6CFA219B90B3C142CE343BB46DFBDE25
+:10D1F0007B0789AE17A2F4AA6EFB99AF3E40FAD521
+:10D200009D70BA697AB73EFD7229E793E034D80D74
+:10D210005DCFC66CB1735C3D76EBE5B7D3BCB2B7FE
+:10D22000DB3308AF2BDBC37C0E16D9F6EE2001876B
+:10D230009E6F9C92BE8DDFA5735ACEE3368B73DA58
+:10D240002552FD2BF1D4FFBDE4F623FC9F6A7E43FB
+:10D25000CF8BE76B782DDEBB7E39D545E6AFB97550
+:10D260000ADFE30988BC41C55FD2FF2F611F9F8F92
+:10D270002FDA68CE273A6DC4FFC5ADA6FB40940FE8
+:10D28000D3BD8768FBDE433EBC3D5B3BA74D855469
+:10D29000C6439ED5C7D783BD33E7BB8F83E755967B
+:10D2A0004FF0CAB47FB1D2733DE1B9EEEF69581FB8
+:10D2B000E6697B139D9C9CEFDAC47DE12796BA5DFD
+:10D2C000D4D7F4732DCA4A29C5D19DBF64F9D7DFDD
+:10D2D000D3F575C10A712F1BD6F465992BD860F769
+:10D2E000105F0B360CE0FC02F3208EFBD66EB0AF65
+:10D2F000A07ED383B17EB980EAC99D97515DA529EF
+:10D30000467CE744EE91EE8916A48B3AC719DDAE50
+:10D310006B7E5DBF6FDB95FFC467F3BDE6AEF1B01A
+:10D3200062C8379AB4F8B988E0A338B0DE2AF2A709
+:10D330001801FF8E37BF1F4771EC66C51B4775E9A3
+:10D3400013FBD3FB400F74D3DB62742F709E73C644
+:10D35000E277A7649C8F5F458F6BF7D335F9FC6349
+:10D36000A307FE6EEDE6878E5795FC6CA58DEA1C33
+:10D37000B7818BEA1E4BF63ED544DFDB2C59095CA6
+:10D380005138417F285F3862E173F0317B0B53489D
+:10D390001EDB347B47E7C26A945C95505108E7175F
+:10D3A0000F86007D7F14A3C6821A9517C7E524193E
+:10D3B000FAF1EECB0CEFF7294D378C83DF13CA2D32
+:10D3C000E98E5F133D5718E63F943081BFC7290BA4
+:10D3D000DDC175A5BE13471AC6ED28D774CF01BEAF
+:10D3E00010F14F29FEB25F857A99E01C1B06F815F3
+:10D3F000CADD980E637C541A6EE13C3066BF62C889
+:10D40000EBED17A8335D3E4CD3ABC13058D8073392
+:10D41000BD8DF72196EC95398E5B928A81675AEF24
+:10D42000F4D6F54FA77B3FAF91EE03661AE93CD0E7
+:10D4300067A4F3A0F9463AA7D61BE93CB4C148D784
+:10D4400034BF918E192BC618E667B55418FAC31E5F
+:10D45000BFDA30FFF2C034437FF8C61B0DF3F35A36
+:10D46000E71AC60BB62C3C2FDF47049718C6CD7CB5
+:10D470002FDCF323931C2A4CE762EDFB2C9DFF7EEF
+:10D48000FC25FE8F056F9FA044E5407F13E9E3FF75
+:10D4900017FF170CD3CE1174FE5FA45DBD4AF3C312
+:10D4A000E6EFBCA6C6097BF3FA9E13FB3DD87F438B
+:10D4B0002DB4A650DCA4C5075EFD3CC294F7E97903
+:10D4C000CAB5A592E99C3EC6704E7FA17B6DC5A1F1
+:10D4D000A0A13F62BFF83E6AE441F72BD4167FEC6F
+:10D4E00091A3BF871AFD05BBE573F24EFD7E9C9E9E
+:10D4F0003741F3939C87CED2E127252839B7BEA8C0
+:10D50000E7A7E6BC55CF57CFFDDE4AC42577CBBD94
+:10D51000E5B1227FD5F3D6EF8387BF2BBB6AB06F0F
+:10D52000ED30B4FFB2A5B32F8DEBF92C1196CE8D53
+:10D53000234458FE6EE69DE99E5CFE1E95EBDE0BD5
+:10D54000A5B7A7D33D7F04DF152E11E51FFA796932
+:10D5500098EF77B4DE61C9B5BC10DF7D7DCC674341
+:10D5600068BDFF1926E237BB8C1442FF3360960773
+:10D57000E8F9A824CF7334DF7C3FDBDC9AEF0DB5EC
+:10D580003506B9555C6EBEB763AE0F862D2AC79DB2
+:10D59000FE1F497C4FE733026E7477BC726285953B
+:10D5A000E315D0F2F19B35FAEB758B591A3E877172
+:10D5B00089F9E87F6FDEF21AF365514A8756EFA8C2
+:10D5C000E7F8FAD6C1CE917C0FCD53E816752EBD83
+:10D5D0008E31E892BE2FB910FE8B528E1AEA48F0B7
+:10D5E0006CDF8B3ADFEEC65BAC7F78A5A8471E5E8A
+:10D5F00099CAF5EFEEF58F733DE9E6FA370D7A71CA
+:10D600004BC37B063D98E3FFC8301E4EEEB452FD7F
+:10D6100030FCC2C0093721FD8E6DB6F3F7D0280764
+:10D620001DC4577DFDF0CAE1E3F9BBCA0BE2F9194D
+:10D63000C3D1DE1862FEEA781E6A3CC8FD706398AA
+:10D640005B339E7A9D426F6D3B2187EEE7774AB14F
+:10D650006EAA0B9BEB17775BD44F480F1ECA49D7B6
+:10D66000E2B5FA022FF34FD42BDAB5EF4BDBB5EF6F
+:10D670004BDBB5EF45DBB5EF43DBB5EF402356E7BA
+:10D680000AAA6BB44BE2DECF2CC9F3E41CDC2F6D8D
+:10D69000B0CF994371FFC2CE7C05F7A92B08CF9676
+:10D6A00090CF79FD7C7DE8B984E9C240FE9EC8CF69
+:10D6B000F7C38E58FCF9F4FDCDE48D59D7511E788F
+:10D6C00024D67F9C2291CA9CB4EB28EF3B62137A4C
+:10D6D000387D63EC75A4771FE362849FFF2549D4EE
+:10D6E000959C611B7D3F3535D93728A758DCFBE277
+:10D6F000EF66F039C9A55EE78C58451C18D1E2C128
+:10D70000F41C710E989123E256BD2D239EE3F3E99C
+:10D71000D4B27E3E9CCDDF9BACB103C5AFB83F7F9A
+:10D720005FA3DF33317F7F33F24F76FE4E42AF8708
+:10D7300096E4A4F13AF45D0EE965F24FE2D86E4149
+:10D74000383484BEE3E98277BFF8AEF218D591A3EE
+:10D75000EACF2539A20E03B781E13BA0C57B0F1F9D
+:10D76000A23CEBFD61BE3144D7B916B584F8BA3896
+:10D770006107D7BBA6E4A8BC2FC2CBF8A2FD6926DF
+:10D780003E2D7684B93E76A17A786FF81FBB3DF4C2
+:10D790008B5CAEFFAAF9FC1D9EB62FC23185E8AFA7
+:10D7A000E3ADC3D1BDCEF9E55FAFEBEAFD4F9F78A6
+:10D7B000285BABCBDFE2EDC19FDEAAD1A5DDDA733A
+:10D7C0001DFD7E8DBFE7F0671800D5EDEDB1E823B4
+:10D7D000B0ADD7E874EC06C487EB139E11C4DFC567
+:10D7E000D39CFCFDB9BE3EAEE3FBC379F6599DEA7E
+:10D7F0005D48F82FAC1775777D3C2209BEFA578A31
+:10D800003AE8E2EDEF1DA2FF0FC28267F20A39BFCC
+:10D81000D7DE37D319E9CBDF45CD95C5B915D2F79A
+:10D820006EE2B3B9DEFE6DE91A4915E7AB91B56753
+:10D8300086D03DB2C5746F8DBE0FD3EA57D066ACAB
+:10D840004B21BDFC54AF38F73C0AF85CCBAEF91164
+:10D85000BBFEFE60C5F0FE31A7F7A7449F1734BB9F
+:10D8600081F30316DCBF4DCF934D7594B690A87726
+:10D87000B6A5D8384EA67887FC931EEFDCF5A6A88F
+:10D8800077DE9526E268828FF82B1DDCCD714297FA
+:10D89000FF97DC2AD1CF69F505687FF02D65FF255C
+:10D8A0000F45FED2F9C59FAFD6EA01C21F166BFE27
+:10D8B000AF98D6A10027B70FFBC5226D5F8C1FB9AB
+:10D8C000EE361A7C4D0218AD6EB672B7A18EF07F9F
+:10D8D000947817F25045000000000000000000009E
+:10D8E0001F8B080000000000000BFB51CFC0F003AD
+:10D8F0000917B1A1F26FA0F1533951F9BF5951F98C
+:10D9000097D0F884B02E1303C30A46D2F420E39DC7
+:10D9100040FD0780F838109F6322DF1C103E2CCC9E
+:10D92000C0F04D8C81610E906E03D2E781F83B1000
+:10D93000DF05F2C5441818548178A12803430C90E0
+:10D940005E0EC44522107D4780749D2879766AF268
+:10D9500050E6E6514C195E2D8DCA2F5701A647554A
+:10D960000686B76A10FE622479267506860A1508AF
+:10D97000DB408E81A10BA866B63476730D81F2DD93
+:10D9800040792175081F00B5882CEC680300000061
+:10D9900000000000000000001F8B080000000000D5
+:10D9A000000BCD7D097855D5B5F03EC39D879C24ED
+:10D9B000377033C9490C1835C04D0C838878120371
+:10D9C000064DF106D1C6FEB45ED0DA481922F26ADD
+:10D9D000B4B6B94012C2A441B4A568E98D554B79DB
+:10D9E000B646C53EDAA7F482F8446B6BB4D4E1695D
+:10D9F000FF469EB5D65FF9E280536DF9D75A7B9FFB
+:10DA0000E49C939B04B5EF7D0F87C33E670F6BAF1C
+:10DA1000BDE6BDF6BE6ED9C5D804C64EE09FF3186C
+:10DA2000BB5A628CE50D3D9937D6C4228C356B6E9E
+:10DA30007D530963DF546287F56A783F5E8EDDA30C
+:10DA4000E3FB49752CCC9882F5F3198BE1FFA0DD3F
+:10DA5000FAE0BA718920BC531667E1D3ECDF7C365B
+:10DA6000AB8C6955F87DCBA44CDFCD274BB906FABA
+:10DA7000BD8CFE9C2865ACF59597261F32CBF05FD8
+:10DA8000010B455E0FC05F66B0192714C6DE0D2E70
+:10DA9000CC4AB391FB7BB3ADFB4C7522631FB6BD83
+:10DAA00038F9D0C4E1DFBFA9B096DE8AE1EF673074
+:10DAB00018741AE223E98E4F1E9AF7E03C8380A483
+:10DAC000B3A13D63694F0E3C776F3B532D1F82D34B
+:10DAD000390FC6921CBF9FB39D27529B2E8052A523
+:10DAE00094984D70A9F0CF74C6A82AACCBB2DD8D46
+:10DAF0008CE072C0DB11F9E7C03BE27A897AEF066D
+:10DB0000D7753268B7DEC5E9A53D4F8EAD63C3E971
+:10DB1000C55C0F138F27BB1E37301F8D63D251B3E7
+:10DB2000BC78D4751F8B8EAE443A3AF3BF9F8E9269
+:10DB3000FF7BE9A883FAF95F46478C75737CB17E59
+:10DB400015C71F7ACF9F91C5BD12D21914FB10EED5
+:10DB5000623E142B6EEDBC569E02628AC59E3C0D41
+:10DB6000E45671FF9206847BFC2BF3FF8ACFCE45EF
+:10DB7000B5F573617EF94DBDCF5E00CF483C2525DC
+:10DB800060BDB63319850AF4B73C5903F36BC7CEB1
+:10DB90006631766F728991C4F93283B1718CFD8BD5
+:10DBA000981363B2AE4239447FCD340F374B737C48
+:10DBB00048273CC3DB8F34FF10B633EB94E0FF57AC
+:10DBC000339CDF58EDD81A3E5E12FE417C170E8D55
+:10DBD0004FFDE4375BCA0CF163FFDE877F21FC5EFB
+:10DBE000FB3F325E01ABF2A17C0835C85A0AEBB3A9
+:10DBF000DE6C15CA91E52A4B838C28A8EE965CFA58
+:10DC0000D8EBD2C9587D2F5F1FA9313404DF9F990B
+:10DC100044F473CA8DAFF56C00923BBE381823FAFA
+:10DC2000D018CBCD193E9FDBDB90902DE545B5524A
+:10DC300082C68B3D5906ED938BB8DEDBDEB030DB60
+:10DC40002AAF3C9224F0E6A40FA6ABD391AD387D69
+:10DC5000A80DB2E19BF2C5E943FD9CF491B7C6D291
+:10DC60008E7DF6F58A9876C149D2C7171DCF5CD74D
+:10DC7000E17CB556AC6B998F01DFDE5ABF30A39DB6
+:10DC800031F2BA5611BF471A9891CAD02E7F703D13
+:10DC900093C39FB03ECAE0F25E675B2F65FCF4A6BB
+:10DCA0009E51F0A144ECF335FBF5B52AFA6BB9505F
+:10DCB000543519FB73637F40671BA3B72619F0C364
+:10DCC00071A46DC087D25D99C6322B63B17B040409
+:10DCD00032947D5123B589E82045EB62C2E7D165D6
+:10DCE0001BFED588DF56664D49C90ABFAFD54D70BA
+:10DCF000B8713CA07745830E01156A90A57D61AC93
+:10DD0000C1E1473238712A96BF6DA3832EBD8A6563
+:10DD10005A07935E11AD9C5EBF7D72F2C539DE225B
+:10DD20003BBC27DD2EA8EAAF5BF4D0C8ED54F6BAB1
+:10DD3000B93E80C4ABB0836943EBB4C1C5F6495367
+:10DD4000415F175DC612F076037E3A9BE894EC992A
+:10DD50000D45551AD215DB2DA908A7A947593487B7
+:10DD6000EA554A3AF5237B5B18D65382063DCDEF40
+:10DD700023C325E82F691C28837EBF24D6F74B4296
+:10DD8000AFB16AD76BFD26DCA467D5A132CCE3ED39
+:10DD90001BE07F4027C94A29758F34FC7B03EA4585
+:10DDA000904B0DF8DE2257760CF24194D6AB417CB5
+:10DDB0007BECE117269D05F4D11753188AAD750F3A
+:10DDC0007B8C3AE8FFD973A5944712F0029C0B04B0
+:10DDD0009C4F1BB9C548A77D751EA2E305177C188B
+:10DDE00041323EB6EFF76A267A5930DB350407FC3C
+:10DDF000B7CA3A3FF8EF2783EB5244E39870ADA8D7
+:10DE000052088EBED9520AC739F4C7BFDC7C0EC097
+:10DE1000F974B514F3E8046F88C1787DC67B91511D
+:10DE2000FD0E737C9D69884FE7F8E67A840B19E153
+:10DE300095FD09F00AE3256B07FAD7239E8F4AB1B7
+:10DE4000F5305ED69CD609384E892C13BC1B677BF7
+:10DE50006505E887BD384E467C06059F67B9BBBDA2
+:10DE6000A7029C9D13657617BCDA5836BA3C6B77CF
+:10DE7000C833558B1B12B4D7935A95320A5FA40C42
+:10DE8000B93E93BC7B4AE27AB223B9502BC3E91D59
+:10DE9000B2DB81A897E216BD0AF6E25312CCDF1579
+:10DEA000E1749C5D17E77662DF38925F01B11E591D
+:10DEB000531666B10C76F088F3808132D9CDD93211
+:10DEC000878FBDC2FB57CDFE7346EF7F83E8FFA36C
+:10DED0006689F5217C6ADC8BEBCF8C4AA267BFA0F8
+:10DEE0004FB62687CAA6DCF594C7BB4A601D3D51D4
+:10DEF00099E93ACE2F49EBBC19D6B80840F1D7C101
+:10DF000077A8BAF9EF0AD925D9F2F16412E0D87CE2
+:10DF1000E01AA6839DEA8FA61895275FED45FC6C55
+:10DF200006A5C0C7EF65387E00C816E56B00E4ABF8
+:10DF30008EF255EF4DCB5056EB59CC804F212D260C
+:10DF4000F981640E464BD7AAF0BE7D3123FA65688D
+:10DF50004558F0DB1E7DCE5000AECE2646764D678E
+:10DF6000A496E6D75E51EB2D417BA741A5F7EC5374
+:10DF7000C0876987803CF4973303C7DB9CCF52414D
+:10DF8000E4A5BA3CA247B7C6E7AFEF2863E9B3E020
+:10DF90007BF6F403387EF23B2C36910F49724D35F7
+:10DFA000E9424D2425F4EF5AB5D8A60C74B7832561
+:10DFB000B2E469363A25BDEBC45B969B5D88F8ED0B
+:10DFC000AC04FA2F19DE4F11F20FD05B2AB6F0E243
+:10DFD000D20CE394C83AD18759D63F7213FC23D5AB
+:10DFE0001FAA0776662E766D4888175617A1F9E5A1
+:10DFF000B0C13F069673C57CC7B116AA179DD97DDF
+:10E0000000F9ACC0E8AD415CDC1EBAEC595A377679
+:10E01000A786F10880B6EC44EE909C30825C4EBC42
+:10E020001B93493E86E4B4664007215F5F9494B534
+:10E03000CEC88FC8C22600F0A6B6EEC9E85F8659E2
+:10E040004CC2EFA1989AB4CA9F2C06659BFDC78E5F
+:10E05000944D27D2E27CC1B403C8325A79CB69D837
+:10E06000DF7600C8077EF2965082F4C587BEF014B2
+:10E070001CEC43399E95E6EDCBD1EEBE5EF1C73682
+:10E08000213DC4B87EF0C23F28FFB266AA36799C13
+:10E090006DD8CBB90EBD314F09D27CB3BFC4843E1D
+:10E0A000301A268E1B820F206B44BAD956A7321C19
+:10E0B0002F18E4709970E62A9FA66546701C4538B3
+:10E0C000003D0447B89C91BF07F01C75C073D40194
+:10E0D000CF512B3CAD5E3E5FA7DFBF54167E3FF8AD
+:10E0E000BDA8078FB3B78C7A2418A398F44A58E3D5
+:10E0F0007583DE3E32AA34A6D1FA3BFD7E589F7767
+:10E100006DFA61A628EB60D797127CF6EFAC88E831
+:10E1100084CA0A1BF45F97CE34F1A37FF965E0BB94
+:10E120006B0EBB18F215F0AF82DF5DE2EB35C28FEC
+:10E130005D8AFA1FF4F6552C1E46F8DE6632D9CBFE
+:10E140006FB3E7C26759E4E276D92DF4382CA8956D
+:10E150007F592C8A7EB51AECEC53C2840693CEA468
+:10E1600013B46E31467E7790D35B9279D7927DD18E
+:10E17000C5F5A3E9F77DBDDBAEAFBFB1C35EBE9A07
+:10E180002D1C87F475F56D2E96827EAFB1DA1FB027
+:10E190003E37CA1AC1F70DD6D2A905C9CE6AC279CF
+:10E1A0002CD5988A7EDA8A7FFBE1F425309F9D4248
+:10E1B0008FBE09725DB7E88D659194DBA8183EBFEC
+:10E1C000F5526CC139D2C8F3DBE0EA5B80F64172EC
+:10E1D000AB8BFC3AE6F4D7F62AE4AF59DA11BC5718
+:10E1E00076D9E737D6FC9DF3058F85E6BB6CF71231
+:10E1F000D29B23CDC7BD5B325219F4DB03A63E147C
+:10E20000F2C5A46F93AF93B58CDB7BFFD7975A0F02
+:10E21000E3FD01E523AD7FCB541E47699981CFB162
+:10E22000DAFDE7E76CF7A7CFD9EE3521C79DED56AC
+:10E2300078FBDDB89EABD464BD240FD9D15E578B7B
+:10E240005108A870EDAB49A32966A9D77592F50EC0
+:10E250004BA52755AF5E1EA5BF63C2CE78E2BE1F99
+:10E26000BBFB91FFF6BCBA00F5FB37FF5D615E9822
+:10E27000D7B1FB422C8DF4A9A6DC68AF2C03BA4AB7
+:10E2800051393DFD128B5D05144BFD7FF3FE10D916
+:10E2900007CB1EF4A41AA0FDB25FFCD71406783891
+:10E2A000B66EE03F0A915EF748DCFF4BF64FB904CB
+:10E2B000DE2F53D915F10C74222B9C5FDEFA65A07A
+:10E2C00009ED3E69F781AF51BFBD5F76A15C36EBCA
+:10E2D0007D8CFB007954CFC0EFC99F4AA989128772
+:10E2E000AF71F270BFFBAD9F4A1CBE7DAE940FE1D3
+:10E2F000DBDDE34E40BD55BBDF21BA3DFFFE9F8510
+:10E30000110FABF629367F77D56E25ED9942CF57A1
+:10E31000F1899A51027E5B29F875E5DE15A407564E
+:10E32000F66E7E07F975D53E974DAE035E6269C401
+:10E33000EB0B4AAC01CB0FFD24AC03AADE8CEE093B
+:10E340006B15D4EF1237D0D5C533EDEDB0FF8F721A
+:10E3500086F7C7D800C53557F56EE4E331AE6F4C8C
+:10E360003E7D13FF923F5C6F9CAED8F71D8EB3A726
+:10E37000A7531C72776E463FCED41726BF7EF36735
+:10E38000C7772561DCB71EFC7FBB9200FFF27FBC24
+:10E39000B7EBDB302FB6DFA7A11C5AB5E70F6166DC
+:10E3A000C17B9DC2FDB0633FFDC9BD3B815F8EBD9A
+:10E3B000E421BBEED8A37F394587791F7BE0E37169
+:10E3C0006877AE7974EE78A4AF350F9F3F9E8DE2EB
+:10E3D0003F20BDA63CD6754DD1BAEAFB240CC23015
+:10E3E000F688783AD6E7B1BD4A1A43B76FBFE84915
+:10E3F00079003FABE05D6B15AED70AD24358BE093A
+:10E40000F0BCF2BE0DEF285332E13B592847F10929
+:10E410006C13C5F5BEE4E273ABF1E98AE9481F6C01
+:10E4200080E4BFB3DDAA23B0AE53475EC7E3EC532D
+:10E4300037E27FD57D1BF9B88E757C1BFF7276069F
+:10E44000FD3F6C1D97FF68277EDC9B4BEB3ED23A6D
+:10E45000AE78F8D251FD33531E8C85DF6689C33503
+:10E460005531562BC8570FFEEBBD3B237C7D1B005F
+:10E4700021C77E76FC140C2EBFE11AF81ACAC98196
+:10E48000473DDA5DD066D9A32F109F1D7BF859B7A1
+:10E490004E72920525D07BC7D8E09F3ED4832B25B2
+:10E4A0005E58757728ED090FADD3CA5463BD1EA61B
+:10E4B000F7AFD2FB14A7FF95A9038BA40CEBB647CB
+:10E4C00029E5723995477859A1F7B9B5A07D3DA5E1
+:10E4D00099B88EAFCE43BA1B691DCDF96B38FF19C1
+:10E4E00096F5BC9BF3ED48FC79ACC7A34A5943EBC6
+:10E4F0007B4CD807AB52D20B2C03DF32B68EC33B1A
+:10E50000C2FEA3F974D2C3DD0E7A30DB9BF31E8BFF
+:10E51000AFC79ECF67C3D76D8A6EA31B136F6F7D86
+:10E520009A59DEA7859C58C992F505A70ED7572A98
+:10E530008B270B4B86E0EDEC55488EBFB55B213B3E
+:10E54000DD2917568EE08FFF4EE1F6C7CA7D07A67C
+:10E55000A0FC7AEBE02F051D723A5F79DFABEEA4E9
+:10E5600090FF29ABFCC7FE32ACC78B02EE558F641F
+:10E57000EE6FD57DEF64ECEF4DD5F832C2FF669FAC
+:10E580008B25A18B377B958CF18D838ACB16C7EDBC
+:10E590000C4D7F310BE39B61BF8EF35EBFCE7821C4
+:10E5A0008976C8732E4676A01A7BC303DFD787FC13
+:10E5B000B4EFBD3E7C35D32D7ABADD8127351A27DD
+:10E5C0003F588DC4AB79EC3565F3475D9A6C839BFE
+:10E5D000A9C9228CA7FCAEE42F2AF6FB0CDA7FA790
+:10E5E0000DD57F46651DB9D0DF3386145BCB32C4B1
+:10E5F000A71CFDC7672B4CB7D299512E5BE3ABE14B
+:10E600008337505CA295B5A4314EC48A58EF3D962D
+:10E610007EEF6CD3581AC667F5E5B235BEEA696974
+:10E62000313C0047D11AAD144DB391C62F6E91ED18
+:10E63000716D31FE6A114F60BBF7ECD903FDD6E373
+:10E64000B752F46378BC0ADC29B263CE1772F0D7F4
+:10E65000C20E3E28C50FA19F65E8DB54947352D9C2
+:10E660003615ED89F99F76AB4B2DF438BF6C6D11E3
+:10E67000D2CBE1BF2B4D99E86A91CAE96A6DC98690
+:10E68000226C7FD8777D117742A334CF0231CF43FC
+:10E69000C5DF08F643BF074ABEB16512C0551F5516
+:10E6A00018C65BEA234BB654C2FC0B8E28311F946C
+:10E6B0000B9A936A62F2F07176A1BC07FCDD857853
+:10E6C00004F8EF6E8B52F9DE369D9EBBDBCAE9B9CA
+:10E6D000A72D46DFEF6B9B49E5DEB67A7A3ED8166A
+:10E6E000A7F7E11BFD09A4DFBD6D4DF4FE176D0911
+:10E6F0007AD6AA9CDFE60B7C58E64DFB608BDAC32A
+:10E70000EB308E62E2CF89EF3AA0B81CDA37907412
+:10E71000C4F77895CB15275E5B5B836497EE929880
+:10E720000D9FD3556E47C6051CBFF6262E54E1F942
+:10E730006E7D5905D93D2C1E4339BD4B8ADF5209E8
+:10E74000FCF244F18CA855EE66051371356FA87C78
+:10E750004A178FCFCC50B97CAA676B0F65017CC676
+:10E76000A74C473A33E779B0462F42B978702DC0AD
+:10E770005381DF65566EA133B3BF59023E16CC2CD0
+:10E78000A787E896F37F7456F9368C1383E3199BB9
+:10E79000A893D56D6BB74D35E3DE3AD1B14927C0AB
+:10E7A0003F4F1447A81BEE2F3697F0EF3E4EE7ADD4
+:10E7B000FDEF507C2B3A8ED9E28D1DCD32F9393BDD
+:10E7C0005FE171E9E3CDA5DB2641FD1AC01BFAED3F
+:10E7D00039F3CBB21216BADE22E869A7379EA58DAF
+:10E7E000A2BF3A453DB3FCBC2FF15D5C97EF4FF8FB
+:10E7F000793ED2F34E57EA72948FADAF78F475300C
+:10E80000A57F04E249FC1E2F82F700D2F1FA351EE3
+:10E810009A5A90EF3FB4DEA46F3BCDC2E7A1989D1A
+:10E82000AF77B58E1E9736E1DE85708F129735E192
+:10E8300036D7E378FDA2816FB0E17870F69B337F25
+:10E84000D1A8E3DF897CE7213CECB2D25B518B4657
+:10E85000FB0C667B73BECEF6CEF90EE52B9CDCFE80
+:10E860004CAF8BE5E27A3EF0B7531E7A86E192C751
+:10E8700015946357A8895E84673A6BA1325307F2F7
+:10E88000915F5EF473FADFD9796F3EF1919A2A4174
+:10E89000BD70B2E375B078BC06F5564C8E59E5B93B
+:10E8A000F97C5C35E304698A1FD116330C29076EA5
+:10E8B0008A66C2F360FF45EA5BD6FDA42D8C713FEA
+:10E8C0003DEDA57D0E0C8868502E39CCAA36417FCF
+:10E8D0007B843CA951B95F78D661BD47E1F123A59E
+:10E8E0003164C1A388A79A71AC0E7613D3A0A95B3B
+:10E8F000AD3C80D54D3E6C74279E477CB9A33AED64
+:10E90000BFBB2209E22B26E2DFC5224E3F57C419C6
+:10E91000EF69E571C65616BFF034E4EB230A23FF16
+:10E920003871AA8D7F9DF33C20E8EADF85FEFBA5C8
+:10E9300090DB65EA01290BFA0FBD913E1886E7BF0F
+:10E940000939FEB090E307B7FD4709E6137424DCEC
+:10E9500031C469B8DA9F96C00EBD79FA1BFA3550FA
+:10E96000BFA37B523BE267C31A1E977F08E53EB404
+:10E970007B40C8FD704BE7B5B46F27E44B91992FEE
+:10E9800020E4499190278F6D7B7EC9069C5FC24B26
+:10E99000E3B4B2F49318D7676B64B253C2BDDFBB64
+:10E9A0000EFBB9BFCDE0FD76EFF917B4EF7FE84D70
+:10E9B00057FD06E3FFB3DDB124CAA9D4449B9C0AEA
+:10E9C000F7EEBB1EEB857B9FBA81F261041E3C8F84
+:10E9D000C07CA14AD6AD87D321A857D89F46B31B88
+:10E9E000D6B567FEE9D05F59834CE1EAFBA4F8F99C
+:10E9F00021A48746BE0F9D55B9682DD6EF5EFE5CFB
+:10EA000012DB8F7BBA45C265CFF997BB6A107FF7DF
+:10EA100014BDF6640D3C27B94A880E82AFE8F93F71
+:10EA200061D87F3C7A8D3E321D3EB67C354339E657
+:10EA3000B94DA67DFA7B6E5BCDBE61CDBB58AE668F
+:10EA40008C8F4D7279F87ED66D0BFB50CE9AFB57AA
+:10EA5000852BEABCC4FF4F33DBFEACB98F65B6AF84
+:10EA60009412935C79B45FC1F7B544FB02056D3C29
+:10EA7000285E27733E88A77DD67C93E0B5723C1351
+:10EA80003C335C2AC1D31EABDBFD1F309E3AE33220
+:10EA9000D2CBACDB0E87B31DC03183C3C1E133E100
+:10EAA0002806932008E3DF3AFFF97C84EFA3FA41BC
+:10EAB0007DE347FFBFE376393D01D6676BBB4CFB77
+:10EAC000F707AB0F7A118F5BAA6BFDDCFEE1749741
+:10EAD00023F8E8EE7A99F8F67835DFEF679F9EA085
+:10EAE000FD3097F89E9377D04B7B18492358331D00
+:10EAF000D30FCC3F96FC02C04D55D26F939F726BE3
+:10EB00008E2DDFA0981538F2564A87EAA3FF5D7F65
+:10EB10004442BD1412FBD165E6FEB6F24A0CE77F13
+:10EB200087A917DBBCF4EC6939E8D301AEC75B8079
+:10EB30004E685EF6BC144F33A37915B4F07DB62D44
+:10EB40005ADF0137948B6E07D4EB68CFF5927C6166
+:10EB5000DD3C5FC0DCEF98B8DC9EB752E4C8B71963
+:10EB6000969FF519FDCC6B5DF67CC3E36CCBE94455
+:10EB70000F7DA5B675E9391BDC9AA9C3FDCDC17E11
+:10EB8000853FC5A25CCEE5F8F81837DFA834A3BDF1
+:10EB900014BEB02ADBBA3FDAE9E276D2A13F7A1896
+:10EBA000C6E337D479298E63EEA39BEBBD1593AEF4
+:10EBB00030DFA1FD5E1FD2CBCE48293D1F9BF594CF
+:10EBC000AF9FE890E70378C49CD6CD7A6A7E33E0A5
+:10EBD000F5877932E9988EA2E7F2717FF1D63A2F64
+:10EBE000EDF78703FDBD8F4139F87D770CF7B7EF5F
+:10EBF000A9493759FDD7FB5DDCDEDAE112FA6A8BF1
+:10EC00007DFF19F86007F2812718A7FD4BD92BF279
+:10EC1000261C7E8E898FF0C17CB964327F964E1E91
+:10EC2000B2CFEF1474B353C8FB2D42DE3BFB29690E
+:10EC3000D60EBAD1EE5FAE552919F87242ABDD4E51
+:10EC4000286EB1E7D51436DBE93E142B70D8156970
+:10EC5000D263A63EDEE00B9E8A745F05FA92DB0764
+:10EC60009A6CDD6F77EAE33DAAB1CF45F6EEC9D9DC
+:10EC700009E140BC05F1EDB4730F097CFF4D310E85
+:10EC8000227E036AFC908BF240E324679C76C330BB
+:10EC90003819C0397954387FEBFA0CF6D358FB0396
+:10ECA0001FCAF11DCF00C873B298C8BB08911CEEF3
+:10ECB00008717FA5C3C5FD8477C5BCFECBA550BF39
+:10ECC0000382BEE604584BE67C321E2F7A1F0D13DA
+:10ECD000AC373E73FE2E5A2CF4BD30F3F7F75D7C53
+:10ECE0009F6DCE84D1C7F900C781E7EF54E31D972C
+:10ECF000651FE75197F19ECB12A7F8C8A5717E302A
+:10ED0000D743E4E79AF6D33ED5F8D8DADE7CE6CCF2
+:10ED100057693FF738F3C714C0CFFE7CB697811C04
+:10ED2000D92F097CFED147794026BE07ED6B941F91
+:10ED3000A8075E09A4309E62AE83B90F332847440A
+:10ED4000FD33DC5C9E00DD04DC347E9CEF17B234C6
+:10ED5000C9870241373B7D8B6FA983E7CDB3DE7C4A
+:10ED600011F315DE7ED8A7235C5BAB8F86AD729363
+:10ED700035DBE9C77CEFFAA890F6E9BF2525F2DD7F
+:10ED800016BBDE15197063FBFD924EFE5CF20F0A96
+:10ED9000D923FBA5D4E964A8A88CF633F65F134DFC
+:10EDA0006DB2EC7738EDFC1C5FFF1DAB70DECD6003
+:10EDB0002FB10CF12961A70FDA1D517BFBB89B091C
+:10EDC0003B1BA60B7C5D29E61D530D05E198C61281
+:10EDD000F49CC1747A823F50E586FA67B1817CE485
+:10EDE000A3758153CEE176C67F1BDE8CFF8D781B29
+:10EDF000A25BBBDE36F71DF2041E42AC85F6DF1FB8
+:10EE00006F5ABA71228CE72E0A923D9CD7D47EAD00
+:10EE10001CC66CBF3E0DFDCD3CB11FCE1671FD6C06
+:10EE2000EE4FE734D8F5B9537F7B84BDE11941AF8C
+:10EE30003BE5E6487A7DB9DBAED707E3C723C83F99
+:10EE400067FC786CF9A7DF525782791AC60B756890
+:10EE5000D7CD5629DE193E955D11B7D0C3FF751386
+:10EE6000D1C193E7CD6C027E4D9DC6F99CA19F1048
+:10EE7000000584FB09C5720AF36D362453F5987FAB
+:10EE8000B6419DA859D7B1A698DBB35B6BFDCD56B3
+:10EE9000BBF6753F8FA75E1BA8790AE9AA2298AA3C
+:10EEA0002577CF0047701CCFBBC4753B5363FDB8BB
+:10EEB0000FEB615C6F034778B95EA9D35EA7FCCC0A
+:10EEC000043B11184D2FD8F331F7A8A9757EC4471C
+:10EED00084C75F423B244ACE517A8D34E6724D0D91
+:10EEE0002CBCD3CDF557398E73603A98BB50FF8355
+:10EEF000036EB2737A43852ADA93FBE5A53F423B62
+:10EF000070E0250FC3FD94DEBF9F41E71A7A43E707
+:10EF1000CC433AE8951878B6307FE01F9EFCC302D8
+:10EF200018B70F9F6F308C5B0E3CCE6277C1F8AE86
+:10EF3000E84371CADB6546409E09ED7CAC0BF35794
+:10EF4000629FF8DF3B0FE8EEC160D5F6A96C280E92
+:10EF500060FAFFE7F9130F219C1DE3FEB319F9AC2A
+:10EF60000BE054C80E33A20877559E4CFCC7F282C2
+:10EF7000A989F0BEE670A40EF3D16AD44A94340095
+:10EF8000075FEFE77D8947B19F3AADB12E1BEA5786
+:10EF90001FD1C95E9917BDF61096A7BFC2CB1D6ED3
+:10EFA00046F620F22FB3F05FCD47A7D0FC0E0B3909
+:10EFB000DE1E35FA0C6994F5D054C7790E7B1E8B92
+:10EFC000950EB4E9363A48B8AC743013E860B2959F
+:10EFD0000E0CE9B3D0C1F784BC1D9B5F389F5CAFBA
+:10EFE00070BE194EF72DDE9C8AE1FC618EBBA93AFA
+:10EFF0002782FBAB261F68336ED2B0EC59E28E231A
+:10F00000DF997C61F2C33FBC2E820BF8E2421F3CC9
+:10F010001705F5B999F802FD382BFD5F32029F2CD8
+:10F0200060038730E77E81CA925920427E77F61BC3
+:10F0300065A758E8DE89A705B32576D4228F4E9CB4
+:10F04000E0650B1EB5C13C68E5E4F1FD9CAA774480
+:10F050002C7CD709F6331A855D728CE59520DF2D5F
+:10F060000D7AA6E1F98607A214DFF7C49B296F6D1C
+:10F07000C65B81AB810E3F1827EB38F90E7DE9FDA9
+:10F08000C4BF2F0618DA6D5BA72F9B80FEC907D778
+:10F090002426609C7323E0FF281937A9F132E5424A
+:10F0A000F58FE7FB657A943F1351FE9E89EF295156
+:10F0B0003644BD7EAA07EB6C9387DBBD9CBEB77B55
+:10F0C000B95DB8D1DDED45FE1A28F1D27EAA59EF1F
+:10F0D0003C85DB6DB33C229EFCE97A1DFDFB591E8D
+:10F0E000DE6E7B5B2AFEDA448473373D731B520C61
+:10F0F000F703FCE5491DE3F1DE752C91C9EEBBDD9C
+:10F10000CBFD7FEFC11FD03E526E598CFCCE480321
+:10F11000F46759AF05809A2C901F00AE8174DCA172
+:10F12000FBC90E5B10A9FDAB3A65F8FAE29FA39606
+:10F1300075F2FE4349F472FF8CFC8B35C29FAB2BFA
+:10F14000F5125F74B4BA7B702A8B3CD9DCDE8DD4A7
+:10F150008E9A3F8B7E5312D639057E133E717F23E4
+:10F16000791ADFDFC032EE6FE013F737F089FB1B4F
+:10F17000F81DF737B0FCF33683CAB8CF8165DCE7FA
+:10F18000C032EE6F6019F737F0B9AFAD999EBF6A24
+:10F190006BA1EF8FB4B552F93C0FB7B3597932BABE
+:10F1A00010F0DC7583DBC07DEBCD627D1E334A73CE
+:10F1B00063B08EBE08F73B7D4FDFCA703EBE288F1E
+:10F1C0001775466F6557C2B36B5AA80B0359DEFB20
+:10F1D00083F4F4A9DB19C60D7649C9668CD0ADF667
+:10F1E000FCE27C15F47359F4DADA1C28B77A1E595C
+:10F1F0008F793B93F4B5B1A5DA50590F552D7BC0EB
+:10F20000529E50D1A3FAA1FE7736EC5F8F7C8A70B4
+:10F21000A0F1B6C173E0FCB5B0E4E95246E73706A9
+:10F220004ADC29A4B3AB70BD2622FCDCAEBF88AD9E
+:10F230008FA29F3C417757217F40FD34A7CB93ABF2
+:10F24000BF1937A9A60D6F375A3DB9FAA4EA31653F
+:10F2500094FEF0BB344A3F1D6CBD8667C936232F30
+:10F26000633E912F407E5A978BF365978F3FDFF473
+:10F2700072BFECD7DEDA8BBCF0BC48F069972F5E2A
+:10F280008F71CE81C932C50B7A5DD00526E5B69661
+:10F29000FCBE14C6FDD6532AC3B8F35D1E6EDF4C08
+:10F2A0009C10E2FAF2DB5ED297174CF8597B0E9471
+:10F2B00027FE381643FDB799C5FC4827C92D3C6E7B
+:10F2C000FAAFD5A7E63442F533A73D9C43713FC161
+:10F2D000DF293C6F04E5B51D574FC038C707CF7213
+:10F2E000B9F480A0B71E575F0BADE7B420D90D8CE1
+:10F2F00075935DB036AAD2BEBC9CCF9F6E97F615B3
+:10F30000ACE706C59B0478DC7F9FE125FFFB238FDC
+:10F3100038A7D647F682DB97D0B2E17D7752267EBA
+:10F320005FAFF953988ABF395845E76693152AE5C8
+:10F330005D6FAEE0F1B940E8B214DA09B71CF071C4
+:10F34000F910F452FE55AA62EFE1DA083E650DF9B4
+:10F350003D652CAC27BC6BB246795CF037FADE1CFD
+:10F36000A13CEDCD4CAC4BB34C7E60C7B84F7E3367
+:10F3700015F7BBBFAEC5C4D921CA8324D346C67313
+:10F38000BC03070308CF57CD7347FDEB0250BF7D89
+:10F39000A916C37598A2D5D6637CB043ABF5225F9E
+:10F3A0000526D77997901C1ACC53A6F36DED15DC82
+:10F3B0005EC5EFC897AC9D1DC2F32C85429605B281
+:10F3C000AB24B4733A1A286C8479BCB6BCCBF69CD7
+:10F3D0000B29AF5D599043707630C38BF5930D2A9E
+:10F3E000E9A5C2A0378D765CA11937C494638B1F41
+:10F3F00091BBDC9EB79CDFACDACE758C4FD8CB7955
+:10F40000C22FC873E4377FEA31F755EC7872CE37F4
+:10F4100037725736C29B8B0795F5E1F3D91EA96A5F
+:10F42000C479166A7E823BAAADAB41F9359EB5AC74
+:10F4300045BAFBCCF03AE09C52D1DE87EB3E455713
+:10F44000E91CC35436B00EFBDD2CE8BCABC4AE27C0
+:10F45000EFF228627FB7B6DA3B8DC7B99296F14BCF
+:10F46000927E96B48C776A578EAD3CB1BBC056FF86
+:10F47000B41DA5B6EFA7A7CEB07D3F737795AD3C81
+:10F48000B97796ADFED47DB5B67265FA425BFDB331
+:10F490000E2FB495A7F57DC5567FC68B4B6DDFCF7C
+:10F4A000EE5F66FB7ECE1BAB6DE573076EB4D537A2
+:10F4B000ED66A75E9CE2FD7CF6B207CF79D9E282C9
+:10F4C000767BDC694F7BFFB15E5F87722DEC26FA9D
+:10F4D00056518F4379F50DDC9FF1CE89E92857CA43
+:10F4E000845D931534CE41395A13F6923E5083BC55
+:10F4F0009E1A9C4776C7293B401E9D8556201BFCC3
+:10F500001E40B9DC968C97B986E0F669DD7466A179
+:10F51000265C4F7175B3BDAA192C11C2F1746ECF60
+:10F5200080B788F57C3AB4B7CC63BF2CD311EF0118
+:10F53000F0BBEEB2F85D23F9594EBFEA64FDA85363
+:10F5400064E6C7678F146FC16745CBB3B5985E0794
+:10F55000FED5158887ADEE78730FF4BBB5D4CFF721
+:10F56000C1847FD555D24B7C3150A2927E61AA5E78
+:10F57000B1D012DFDAE4E57A25E0BD83FC3BB57457
+:10F58000E6611DF1BE56A5B8C36689C74792B00EA5
+:10F59000A8D776CD7AE39DEFC07B6FA9B7D00BF2E9
+:10F5A00028F698DBC0FDCFED02AFA55A652D585C5B
+:10F5B000605F341EC4E7241DEC0C7896976F3B887F
+:10F5C000CF9BBC3CBFEE8CD803B5284BBC73B8FDB9
+:10F5D000A74C71A7D6E1FA691C8E91E84CCDD9C130
+:10F5E000F7A9CAD4D791DED0DA3E210FD1810FE935
+:10F5F00040A227D18F2F1224BDE1C38D1C2CAB520A
+:10F600002A00DF23658684791735E11DB4EFE64BC8
+:10F61000DBED55F03737215E230DF6F50E787711C7
+:10F620007CED128FBF7665EB4FD702FC5D79A53973
+:10F63000183BC1F844A345DE6C17FAF42B3ED9D42D
+:10F64000FF246FE85CD7B4217B07E87F877C2AC260
+:10F65000D7CD506EF96EEA6648EF3E0D5613EDEDCC
+:10F66000EF2689FE4D7BF73AC15B75A54DB4DFF5FA
+:10F670005EA48AEC5B5FEBCF33E2CFD7AF30E3AC75
+:10F6800091F11A9EB493F43D2B75EB6857B4EA6E72
+:10F69000A327833CA8F2703B6623E67D203C22EF43
+:10F6A000A34BE0C3DC6F7BCFCC8712FBBCD76533A9
+:10F6B000DBBEDF757955E347B3C77DE0F7252CF056
+:10F6C0006E8471102F1D9F36D6C769FF8FF1736A44
+:10F6D0007FAFE8A1F3C0C27FA91276D22C0A9A01AB
+:10F6E000DFB819F909E763FCE22CF4362FAA47BE0C
+:10F6F00034E31DAF7973A85E2CC99416B2575CA68B
+:10F70000DE924F4C259875B719A7249397EB35F8DF
+:10F71000F7009EAB38B5CB7E5E6962B7BD7CDA0E72
+:10F720007BF9F494BD0C56F311B40B1A19C7CF9999
+:10F73000BBEDDF1BCD385F1D3F67E185914F70FD4D
+:10F740006B3BD7CA84FE37E3A9C5BDE91A14AF45A0
+:10F750006BEC7AB540E8F90287FEAC0A29E4E7D7FA
+:10F760001C8E1C42FBD18CBF3CEFD36DF96F661C25
+:10F77000C529CFFDAF6C63F085FCE58487C7171200
+:10F78000E0DFB41689B845317FBA14FD99C564A786
+:10F79000B59C86F2E9D7DEC4075E325AECE720DE7C
+:10F7A000AD571F97743E4EC232CEF5E5C90BF8F443
+:10F7B00053945762C6314C3FFD1F01E322E4AFCDA5
+:10F7C000B1E75A1EC338D24B1E86FDCC559E3EDC97
+:10F7D00006E5D5C52AE5416A3396FFC88F7140FC1E
+:10F7E0000EE59A127D3CD1FF932EF2D737087A3678
+:10F7F000CFE798718F5C9FD03F3EC9DC87F08B3C90
+:10F80000573FDAB967EE06D96CD3733C9E66C6CD16
+:10F8100026F7DABFF732295783F59BDA9492B95D60
+:10F8200065046B2C71F533C47A4D599CBE753194C7
+:10F83000EF63A92ABC2FA252D045EC90FD3CD838EA
+:10F8400026D1B981714794580AEA4F79C4FEBDC2E6
+:10F85000715EEC0CE7F931479C37A4B07796C0781D
+:10F860005BF41609E5E796C560C343B9C227F28782
+:10F8700027B149487F7395602C8DF8FD83427AC388
+:10F88000F3EA692F2C417DFE2CCF4FD14ED5B7D551
+:10F890004159FB8D42FA490BB0CACAE0505CF87B73
+:10F8A0002762ACDD351467DA03EB5A3611FD6B2F96
+:10F8B00043BDF273585F2CF7823F8EE507C11FC727
+:10F8C000E75EF0C7F1FD2FC01FC7F23EF0C7F1F9A8
+:10F8D0002BF0C7F1FD23E08F63F9DA404D8D2FCF78
+:10F8E0001EA7B2C6ED86E254FD9219A74251F2BEA0
+:10F8F0009BD3FF60BC2AC1E35563F76398FD503C7E
+:10F9000070583F222EF8F60DFF792F9E9F5E316DC5
+:10F910005D179E83F5BACCB818CF7F30F39A4DFEB1
+:10F920005BB1F75ADA0F76E71F69C1F5D85B1DA402
+:10F930003B86DCAE8486F2D1E97F997E97D3FE3593
+:10F940009F4E7DE4473BE02CB493BA29EEB3C9C582
+:10F95000CAE95CACE48F215F38E390261F3FEB2BB4
+:10F96000CD789E69303F56C4673C2CE5C578995BDD
+:10F9700012F314F99B24C2A08BCDC8CF967CE36010
+:10F98000459AE21CC1A041F697047619D9695A221A
+:10F990008A71A8CE11F26177093E5D9BEFA67B24A8
+:10F9A0003AF3F9FE7F5D512C8AEDD7E74F8F5AF37A
+:10F9B00063CDFCDD43A1E9DE7E4B7FAB43A5A3EA2B
+:10F9C0002905F4AA3E8A5E553C3C7F7DFDC1B3BD4E
+:10F9D0009897BC29B8B40FEDAB4DD1089D5F3F900F
+:10F9E0003F9DEC8FC1FAD19994BFAC04B9DDAA4414
+:10F9F000BD64B7AA38FF8AA1FA66BD1B857C06F6EE
+:10FA0000A3F85C20D84BF53C6A9CE21F9E08A3FD3E
+:10FA10002A8F97E70B04C1BFF6DAE2A6421FFBB8B4
+:10FA20007CDBA427E2D86E5354D5511C6D2AAF223B
+:10FA30003CAF17785E9F67EAFD18D91B0F0A39683B
+:10FA4000F6B35EF8EBEB9BDD6477C55BB38DBA5C18
+:10FA5000CAC7FC09F2DFA6E05D5ECC6F77E7578F7F
+:10FA6000DAEFA363F6FB6A6DDD59D4EF83187F7676
+:10FA700087966AD8AF6B84BCFBA7447F9FD7BE0430
+:10FA8000CC69B4DFC54C7D9B8A5AF7899D4F3FDA1C
+:10FA900089670D6FB742EF9F8779BF2A4BD6FB95D9
+:10FAA000E1E71656EEE3F7506D55FBC8DED9FAA92B
+:10FAB00094F1FC43B6DFD43F837EB8CD5E2914FCBD
+:10FAC0005428BEEB68AF94A05F69B72FCE3A6C2F75
+:10FAD0004FEBB39767BCE8B4578C3FA0BDB248C8A2
+:10FAE000BB3E90CF3C6962404539104FA66A10EE8C
+:10FAF00046D6BB16F7295D22CEBC48E8AB8BCDFDC0
+:10FB0000477F36C15FD8ECB7F989E67D1A45A2FF79
+:10FB1000E2BA43D7B6A3708D9BF68F4EFE65F1FC1B
+:10FB2000076B484C3AECA046C37E1EF562879DE306
+:10FB3000B4876AD41ECAB72C70C41FCC7D4A9C27D8
+:10FB40009ECB758EFF59C735FBDB097A0BED15F39C
+:10FB50009E02BAC70BDA17AB692916A4FC2DCAF3AB
+:10FB60002B5CC38C9E0C743CD3CFE5DA30BC25CF24
+:10FB700023BC9D2FDE1504F93D2805754A4A2FE167
+:10FB8000F95F284F162E87F990BD7C82F6A1CDFA39
+:10FB900039D9BD942FB6B341E2FE6392911D62AE96
+:10FBA000F3CE203F3FD378AE9492B17D4B298D4F59
+:10FBB00070950EAD2FE0E928C713CF2FBBA4DE7ED2
+:10FBC000CEA7D1616F98F470B1E3FDCB3E7E4EDAE3
+:10FBD000E483B7CF7E71D22900C70A29591F504E3E
+:10FBE0005E4F5AF8C37502F910FF3E8EA642FC71B3
+:10FBF000D0FB9046F901D9FD773020C9063F4BD69E
+:10FC0000CD06BDE81F385382F225FEC91D5DE7E22F
+:10FC100071C5817F45A3CCE3A99A5B5F3C54F6FB99
+:10FC2000E7503922C601D722C9D7DB726F01C0FB6A
+:10FC300003911FB0D960DB14CCAD94B56DB192A126
+:10FC40007639D84E1AA55D9C6D5333B40B9AED00EE
+:10FC50005D9DE63D1FA5F8E4DF65018F757C15F11C
+:10FC6000A6E9413AC7334FD530EFE18BC2316EACD4
+:10FC70007927D836D7A9C3DB01D86B4DF8E5CCF08E
+:10FC8000A7F0BB757CD728F0FFB3F131567F6EF13A
+:10FC9000FD33C307D5D78D1B79BE08978BEECBD02C
+:10FCA00083B2A59F5B0E7C4CF16BF57246E77454F2
+:10FCB00097A1C580CE2BB4DBC80F57B3EB34B40388
+:10FCC000364219ED808DBDDD14A7AE28BBB50B897A
+:10FCD000BE22ED67280F26332DFB3EE877B2A662E1
+:10FCE000260E53CF3D2463DC9B7D89D13991AC0333
+:10FCF0007E7EAF45C9AC1FA37F949DEDA5385020F3
+:10FD00007BFA8FB9B1CBE3C126FC819A23B51827C2
+:10FD1000571B590C59519552AC0699EC7446FB107F
+:10FD20007E63EFF578DE12141FE927BAEB01F5AA1E
+:10FD3000888B8FE724C3BADC5A23FA09C9A7548AEF
+:10FD4000BF8F47D31488B2A222671BC25391800E83
+:10FD500024849FC7B52627E4581AFAAF7A87B76379
+:10FD6000BFE5E703C097687A3838845753AE8C17DD
+:10FD7000F1F2E8627B3C990DC09CA17DD56F17DE46
+:10FD800083F18471C3E437F7AFCD7B74B2DE61F1E8
+:10FD900087695FD3AE37FCE2BE0ABFE31E8492A040
+:10FDA000CB768FC130BFE1BB71D2031E16F3BAC947
+:10FDB000BE584C7683E98FECC48A18FF2F66FC5E30
+:10FDC0002B67FBE9BC3D8B72FFC4E30733AF0ABE70
+:10FDD0002FF31BA46F3D50063C4A6EE6CD87F70516
+:10FDE000328F8BAC95988AE5A1F1D2B44FBF418A8E
+:10FDF00075C5A421FF77BD16A3FC01B626C7662FE3
+:10FE00009B79A8ABAF29199F03CFACA1F3401AD2BD
+:10FE1000E3EABC32B29FC3B9FDFF07E5EBFB9B36BB
+:10FE2000CFF5A2FCC4FC8559F05FA0B32309F2D63C
+:10FE3000F35121D32D7699476DA13898E7A3536CE0
+:10FE4000EFD36DF6F3834650AEC371C607747E2EB2
+:10FE50008369EDD8AE86D9CF097A3ECAB7D9E943CE
+:10FE6000FD17D9DEA7C19EB1DE4F3172FF01A69703
+:10FE70005BFB3F7584FE2739FAD732F63FD46FAE6D
+:10FE8000ADDF0E95C74793113FADBBD31E981AA89F
+:10FE90002D0A4C1B257E1FE0F1C70DD1168ADFD736
+:10FEA000326078A093F33E3DAAF0F36C8CEC3656AA
+:10FEB000648FDFD70AFA958122907ECF53EDF782C7
+:10FEC000CD61CE7BC2ECF6D073C82830AE1CAAEE52
+:10FED000A338FEC7411DFDAF91ECE5BE3646F1E308
+:10FEE0003981FEEB709FFA82CD77BA3A668AFCD7E9
+:10FEF00002C62EDDFCC05CB4EFFBC479BD8E884C1D
+:10FF00007889D78EA7F337663F71379B88F2302EFA
+:10FF1000F3FC04FA03E3F7E515DCB52903FE9CE7DF
+:10FF20003B1B0D295E66A19B3E19F06A1DEFFCC2CA
+:10FF30001EC5328FB8874DA3F1849D3B38DEB8CF04
+:10FF400037DEB322EE648ED738CF3EBF46B746F3D6
+:10FF50006B14FC6B8EF72CCE2F037EC71C4FE67400
+:10FF60003338DE05F6F9357A349A5FA3B8E777704F
+:10FF7000BC719F6FBC0DAE9604DA6DDB24CEFFDD45
+:10FF8000815F75E0BABED7B03A4AFA40D8C5176368
+:10FF900003A877B1CAC75B50E44DADB58CB713E485
+:10FFA0008021F2DC0D0FE66F68544EB545E97917F4
+:10FFB000D8D906E56F94D3F77BDB6254DEDD369348
+:10FFC0009E663FE533F9BD33A7CF9632DADB870370
+:10FFD000DCCFDA96AF5D7E15EAA51A3F3F0F39F305
+:10FFE0001C6658EC5F30880FFA70FFE5325689BA0C
+:10FFF0006DD20E0E77A46E5C0AD7CF5F79A8AF0DD5
+:020000021000EC
+:10000000CA1E974B477D0ABC10CFE4A73E16E07E80
+:10001000B8C7CDE53D9BC5EF315C20F40A531A24E7
+:1000200017E2E3E26CDAEF5FB8C8086980B745927F
+:10003000F48732A1A7F0DCCAA562A99C767E0435BC
+:1000400006F41B319414DE4F7469D1E126D4CBF150
+:10005000D025E41FC4A1610EF473A9D09335AF7A03
+:1000600018E63BB0B96E8263D122BB3DBFCD97D6B7
+:10007000D03ED9561961B83E0B1BECDF3D6ECE87E2
+:1000800071C7BD050BC6B8C780EED2CA9047EA8CCF
+:100090004F3E1AB0C7218FB38A5BEAF0635164D434
+:1000A0007B0CD6609BBC21FD369C8E393CAFFB9906
+:1000B000F0DBF6513CCC84AF404D4928AF0B9BF7A9
+:1000C000D9F29A00B1640C9B7178A6DC57897E88BE
+:1000D000733E3BA5FBF247BBB7A480A9AFF7978B54
+:1000E0007B3DA5E1F37E2520F26F07E73DFB9932CA
+:1000F00096897F78DC75C16125B6561FC28B8987CA
+:10010000FF693EEA12787FE6FCF7ABB9FF5664BBA5
+:100110003FD3BC17F892C1B2CA540B3D5FBCCC4D63
+:10012000F60C33062A90EE8E9C1BE0F7B899F64B3E
+:10013000FA2519ED972FDEBF516CCBDB14FD8EB481
+:100140005ECE3C42CB39D0A13C77CC2F91F83E56C5
+:1001500001E6B985F9FBA3763BD396E7B6FEC04F1F
+:10016000258CF3DD81F978967DEB42F0E7516E1630
+:100170002DB7E7D539E132F3AA06CFD1CE5EA4DDA3
+:10018000A7D3BD89DD78114DD78E649C59F223CD5C
+:10019000F381A63FED3C17A804F9FD795171DEC249
+:1001A000190FBE5E4E6A2512E6A3A6BC35F09C92DE
+:1001B00093A8C2A3EAD72BC97A7CAF8C9FD58C7841
+:1001C00058DCFAED18C6EFB4DCCC71E9C5427F9F6C
+:1001D0001BE4F18E575CE9628C632FCDA93D373863
+:1001E0002D43FDD6EF527F7346B88FFEB220A7BFD6
+:1001F0003B843E777EBF588CF3E51532DD6FE163BB
+:10020000A1945482FBC6DD33E93CDECA9DB14CE7C4
+:10021000DE9E0A2716042D71075F193F7FCD58EF28
+:10022000D988AF8D7FBBB3F77E4065CEDF82244790
+:100230007314DEAFA5FD6599DAEFFFF8793AB7BC24
+:100240001FCFA9A09DCCEE9887FEDCD6C1324B4AC9
+:10025000181FCC16E5642BFF3E58AE9A578365A451
+:100260004120B29782733B915EB64A4C10E33C5EEC
+:10027000DFC5EBFF427C9F73E15B3FBE05E5FD748C
+:1002800037F9815B853D62C2F77290E7CDBC3C06D1
+:100290003E5BC5F720E233F299F0D99A091F2FE7A8
+:1002A0001837E0BAFB30930240F0FDCDBB06F3886F
+:1002B0007FD0C66257C11CEE88EDFDE92D8CDA2790
+:1002C000ADF461B6BF28C7581B24788ED2FC4265B6
+:1002D00041746FD8C6198CFAC900C7C64CFD98EB9B
+:1002E0007A308BCBB10FD1769E86EBCAED3FC5D36A
+:1002F00017C5FD7FADFA7BD76920473A4BBA9B32D1
+:10030000D1F7F7437C9F3A7B8478F5CF053DBEA4B7
+:10031000C57F8070B46BB7D2FDAA6E89DB0D1B67F9
+:10032000F633C9D2EEB7218E6F80BB07EBBBCFE6A9
+:10033000F79E8600EF986016AAE6F06FD48F30CC57
+:10034000EB0E458F505E68A8BA9FF89D8E2A1470F8
+:10035000BA427FCD2BECB39F07BF320FEFDBC85102
+:100360004CBA7BAB13E946192A131DF5E4F0F6BF2E
+:100370000FBDD5990491BB0BEC17BC872359C0F373
+:10038000469CF3FBA5807747D8D88BEB320C9F9E19
+:10039000FE1FDF02EDB74EE4E76DE6C87D4D572244
+:1003A0005D5E1824FB0BDE3759EFBF795DE0EBF59E
+:1003B00020B79FB67EECA5EFCEF518895E7F27DAD1
+:1003C0007F0E7AFD5D263A017A7D06E765A1D7F7B3
+:1003D00059667A7D7E047A7D21135E9C6585193B82
+:1003E000707F56FD64DE6EEC4FBD68F68EFBE1A9B2
+:1003F0007C725392563326D9CE979AE3544A893F5A
+:10040000072DF2DDBC9FFB9B41DEFFB07E674CDF1A
+:100410008172EC24FA1DC0F938FBDD1FE4F0CEB97F
+:100420003098C8746FD1CE10CF1BBF5BCC6B24BE8D
+:10043000792AC4FDD991F8E681D020DFB050DED80A
+:100440007CF3AAA80FEBE0C5FA63F3CD6DF4F49545
+:1004500071BEA163C8B386F30D4BBE487CD259C2AE
+:10046000F9227FEB9F3B31CE31C847C90FEC7C941A
+:10047000FCC0C6477FD9FA01D577B60F8F704F956C
+:100480003EC8FFF109380FE34CAD9D9FB3E927BD8E
+:10049000DDC3060E7828CF96E7B5FA9349839B0D06
+:1004A0007D0CEF3D2C1778D8853E18FA39D3459C42
+:1004B00049ED630B43C3F939549DAEB6DE23F06BAF
+:1004C00031FE47A1F8D4D0341CAFFF74B4BF465AF4
+:1004D000A76A517F5BB6511DCA40D763E9A1CB43E0
+:1004E000FCBCEBE502EE9CBF795BD0FE74F2FB9C9A
+:1004F00095BFFAEBBDA3F4739968BF20F4B9F97FF7
+:10050000412833FF5F1CB2F37F35DEBF9981FF2F97
+:10051000CBD41EF8FFCBA10CFCFF05F8FDCA50069A
+:100520007E9F1DE2FD8F85EF7B05BEEFFD82F86E9D
+:1005300017ED6F0A7D6EFBE0A65066FBE03BA169FC
+:100540002785EFF611F0DD1122781E24F8437A900A
+:10055000E2D85D33D85EA934231C5BADFD7875DE2F
+:100560000FE0FD7D09E87ECE275DB14CF7CE40BBA4
+:10057000DBACF09BEDAA439A99BC7D2DFAE7775C42
+:1005800014A4783FE8C71DFF643AB83B94413ECFBE
+:1005900091B91CFA20F820D9815FA0FFDE4CFD2F15
+:1005A000137436965DF098A00F98F7BF85A60D9747
+:1005B0007F3DE27752768413FB4384AFFEF928AF88
+:1005C00076DD9823613CAAC8484BE827EC15FA660B
+:1005D0007248E7E71944BB5D6A5AC27C965D2D9A62
+:1005E00084E78D2CFD1D0E4D1BB93F271C00DF6FCE
+:1005F0004224EF8CA7B15DF5901DF899ECA44BB2A5
+:100600008D2321D23FF1E7496E9F6697DBE63CE4FC
+:100610007837E5BDF86666FE1D97BD41D594FF7F2E
+:10062000B2CAFF17429AF9BB52D4DF67D53F00DF49
+:100630001B02BE3733C1E7C4CB58708E177A1EFA3F
+:100640007B3F939E72F667FAADE63AB9512759E2BD
+:100650003A5278D0EE656194DF1D329D435A20E412
+:10066000C98299D9C26ED7FCD8FF1D224E7EC7F22F
+:100670005B6B70BFBBE726AD125150D0CCF59EBE70
+:10068000FC148A7F0644BF4EF807DBBB7B4FC77B59
+:10069000C761DC2C1CF7BCD92C8D7E6316DA0D14D7
+:1006A0008FD0E877BC723CDD518C9F6E94BA9B96DC
+:1006B000A25E9D1FE4E74AA28BC6B8BF6D9D8D6EFA
+:1006C00059B47A8CFA6BA9BE16E8A6FB2F4EBABEB7
+:1006D000A7BB29537E492C2C9B76D199A3E2351ACE
+:1006E000A1B89689DFE1E3F0F5AB89B74888EF5010
+:1006F000B5A4E1D1AB10D009DA4B72591FE5337DB7
+:10070000A99AD30B03BF64F4FB333ACDF59E13CE05
+:10071000FBE27099F5461E4FD4739C57C07D2F8A1B
+:10072000CF06B91CA38A507EF7706EC6B8BFF9DC3D
+:10073000D0A615A92E6BFF29BE3F33983F1D8BA273
+:10074000BDD5CA383DB2A897EC30BAA7DDB29E4BF2
+:10075000C3DC7FFC4156FCAB61E2EF18DD4BC834D3
+:10076000EDA4E603EDAEA2762AB40B9D7CBB919F6F
+:10077000E6EFD7C5F4B8E51E34935FC727920CEFB8
+:1007800099F157304D82F58F84CC7D424E07B705E5
+:10079000CD729236C9E365DD3C2F5F37E984CB1516
+:1007A0002DD06BC8958C6DBF79FE05D1D3A1BFB29A
+:1007B0004414AFD487F213788F5A8EC2CBC0684FDF
+:1007C0001C227DA19D21C5404FB5CF7DE27031E354
+:1007D00047A5E8F7D5E63E81F9843D66192FA428A0
+:1007E00087B27FB06C78A3502E1D2C27B1BC4BE88C
+:1007F000C9ED37CF7DA23D4872EC662B7FD4083A15
+:10080000FC67D35F8FDEAEE13983645425BB6AA3F6
+:10081000831E7E157613FEA76A8914F2C5829B0695
+:10082000543CBAE22D8984901F2644DF4FE2FD79C3
+:1008300013668B34D5327E4F434F740DF1650FAE86
+:100840000BE36909189F1C5A9F54E6F5294FD1FA0A
+:10085000F875FE5DC632F9DB3CFE1628E7FCAC7984
+:10086000787CEF2141AF07C33C7E7450C8D7AC6899
+:100870003BF953DE7A99E2C759F5B24D6FD02FE0BC
+:10088000517DD5466F2FE724F6872D7A01962F5E8E
+:100890000EF3F09F1EC9C1FD979A72750DFADB3FEA
+:1008A00012F61FACD30F495E5446FC0992DBF1C728
+:1008B00033AE9BC0CB58EBF67C5B2256E71A79DD52
+:1008C0002EBB9CE7D33BDFBF28E4EAB1A63F7F0FF6
+:1008D000D965857780EEF3EE2A5B4B715833EEEAEB
+:1008E000D95B932ED487F201D705C2B3E95C8A6342
+:1008F000DCE73FFDBE46E7443EF664DC4FFA87C0C6
+:10090000F391B6266A070B4CBFBF72054E85E7B15F
+:10091000D9CEF199E711BEC638312C8A2FF912CA07
+:10092000A1A54D0ADDDB7005B3E7537CCDCCFB6A96
+:1009300035F3E378DE578265CF43365C9274FC7EF4
+:10094000048BCDC373F4C37E5742EC6F7DDD9137CA
+:10095000F1E5A625B13A51EF3DFA7F8AF0B748E7B5
+:10096000F277518CDFDF7369FCF2589D653FFA85A1
+:10097000BF2B19F3262FCA32F1118FD54D1C8E8F44
+:10098000A571C9ADE963E3E564F1B044AD9C97A7F7
+:100990000FC78373FE80B1AD88E7AF039ED1EE1C15
+:1009A000091F508FD6E385CB15FA3D99794A830B01
+:1009B000F741AE6C94688F09F01B1679710D732D99
+:1009C000F03AF1E8C4D7958F323A3770E5ED218AD5
+:1009D000B73D67E2277D1EED5F98FB2796791EE500
+:1009E000F95B1ACD73E1CCCAC7F1DE84443B485BA6
+:1009F0003E5FDB3EE05216CFC2730B30EFA323AC59
+:100A0000BB6D3FD0099F137E9FD02BCE7D31A6A614
+:100A10002B500F1A59625F700A8B89FDB12C4AC79F
+:100A20002DCB2C6F9DF7CD997476456BE3E0B8D84C
+:100A3000BFC41283650DCF6B3DA96CBD14FEBE3AD9
+:100A4000CA7FD7307E796E077E5BC0CCDF1B3268F1
+:100A5000BFE90A81BF46F0F8F0B7D0CE03E184FBCE
+:100A60007A0B0C9F1EB4CCF3DD6EA95E9CA3CA5A10
+:100A70003419DB250F285386C3BB3ACA7FBF10E861
+:100A8000F07D2B1DFA26F27B659D7831F175659618
+:100A9000D8379CC2A67C16BCBC848A731AEDD7904A
+:100AA0009D3B2079E93CBCB98F037F4DBA4174B6B8
+:100AB0006695083B80CFDBBCBF8BB116B2EF178BBE
+:100AC000F358AFB858D30341BEAF5365915B37E4D9
+:100AD000D4B46659EC6E735FC7BC2FCAA4E7AF7974
+:100AE000836985D3A1ED3EA8A13CA604E53129592F
+:100AF000CB75C447177E3A9BEC9EF5D8BF12E0FB3E
+:100B000055BE271FEABA541F5ABF4D573DDC3D0D55
+:100B1000CAFEAFFF3E499DEA3984B79058B71AB173
+:100B20006E267CFE0AFEDEB27E3C7E562EE26762B8
+:100B30001D47D213E63A9AEB867614D2AFAF5CFD2E
+:100B400024D3EFF0B143D503C8A789A84A39740963
+:100B5000E9B50EBA678BE9BB70FFFD8A5697EDF7D2
+:100B60009712784E1FEB6FF409BF2446ED97E6F31A
+:100B7000F6AC9CDB8D83749F84F6963C20E60D8F4B
+:100B8000C375EB87B6982706FD8D437DCFBA2CE35E
+:100B9000940E1F77C4FE1CED94C17D93582C669172
+:100BA000D70F65713DF96EB4BA57CE107F319F4BA8
+:100BB000BDB945AA253FEC68BEB729D3BDA4667F61
+:100BC00083F7C60DDA896F3F71A868C84EDCEC7AEE
+:100BD000C36E27B237BE909DF872D61B4FB4033C4C
+:100BE0001FFED143FAEADD7A3FAD436EEBF9ECBF6D
+:100BF000F0BCAD8ABFED47F63DDD7BE36D2DA4F97A
+:100C0000482A600E7F1F4C8F4988EFD7F0925E8C88
+:100C1000DFE92C1D02E072D59884F8BA55F8A3409C
+:100C200067A75BEF677D2D8BDB5BE6381E2F4BE202
+:100C30003963B35FA083B59457DAC0488F98FBB08F
+:100C4000263F9BFD0C64D9FDE093E0DF814CFCFB6B
+:100C5000B4DCF2A7EFA0FDFA9442F9A05F8DDE406C
+:100C6000EF2F6BBD929E97B75E43CF4FC478DF9254
+:100C7000129F64C17AF535FDFEABD703BDAEDAEB4A
+:100C8000A173652BBEF5D79B913FBDADB0EED8EEFD
+:100C9000EB57DE3E0DBEBB27CA64BF7615F37C0E54
+:100CA000F75A89C7FB75773DC650FE3F378B9AA828
+:100CB00000800000000000001F8B08000000000002
+:100CC000000BE57D097C54D5B9F8B973EF2C496662
+:100CD00026933D210B37842548C049202128D60979
+:100CE0005B632510C40525C0844008109280568798
+:100CF0004A654200A3468D75C3A5BC8162ABADFABF
+:100D00008252A56DA4137101A518ABB5B820417826
+:100D10004ADD12411EA3D5FACEF79D73927B6F6612
+:100D200042687DBF7FFFBF177FEDC7B9E7DCB37CAB
+:100D3000FBF9CE77EEAC7096E4BA0A09F90EFE2EF6
+:100D4000266485731A9649AAD3448A085963A3FF77
+:100D500056093973F8E6D4C5898444DBED6EFA840C
+:100D6000581AB3EF34D132D92F9347289063C8A2D1
+:100D7000F23C0AAD0C0E712984240134218C074801
+:100D8000FBB585244212A09DDBDD60A765C54F5CE5
+:100D900000430A3EB74852795B5EDF7C0414FDD9FC
+:100DA000423221E3613CE3FB167C7E8B6A2985F7A6
+:100DB000E504360FF17E0E7F3F87CFC7168A61F3B9
+:100DC0004830F6E364CF65D2D066EF3F8FF5B1537C
+:100DD00047B992004F9E5C80847499CB1D842CB4DB
+:100DE000BF72481A47A1CD1E9429243EF3A75DB9CE
+:100DF00004FFBE1B06FF5FE1FA700C2112E992BEF0
+:100E0000A343CFFA460A0EA5F88B2A91031BB229F9
+:100E1000945C651326D066256637E0B37378A263C9
+:100E20009866FC0B5C12E2EF75C5E58079964F97EA
+:100E3000CB0379D87DD2E5D0CFF4AAA25BD97036A6
+:100E4000924CC822F66FF2BABAA37918ADF7FBCD6F
+:100E5000EE11948E8B6CFE00CC6F1151FC5D366CE4
+:100E6000227D2721549522FE1E9DEFA269B227CA3A
+:100E7000A96B47BEA3F3241BC90BC369FF0B253E17
+:100E8000809F96E97BEFF3E29169A7AE80657411CC
+:100E90009765186DBFB0AB722619875576E0A7A588
+:100EA000BCDD229FF9786FBFF47F957E7D797171EB
+:100EB000FE4B940C142F81D209C067A34DC867550F
+:100EC000CDFA764BDFBBE46FC409FD2AC77BF10D79
+:100ED000F32477313A4F6F72A9144FE7BB542CCFEC
+:100EE0009A766C1AA1E5D9845C01FDCE9E26BB8260
+:100EF000B4758BCF443C74E2073D7240A26B3B98C3
+:100F0000DBB5FF62C05BB1597D04D69A4B6E9F9BE7
+:100F100008F5E35D80E772789686ED098176A9B6DB
+:100F2000C008FAACD373CC5EA5E1BB83C5C7467BD2
+:100F300029BDB69A484D387E22A411E9FAC24FA2C3
+:100F4000B19F23F748012B9DFF74F99B3F4DA4F3FC
+:100F5000A9FAA9D96D55715926A0EB4C3793474290
+:100F60003CF6E9149F0B092B1F23E545413A7E55BA
+:100F7000FEE1122BEDA76A9384722AF04FF1FD81F6
+:100F8000166FDE86F2D8A08A78D73DA79D59809F3C
+:100F9000299E3F8880E70FB478F6BDF7F6D817345E
+:100FA000ED5A5C8E44E07352400ABEA3A8394D2628
+:100FB000C78E27FDD72DE099F587C6BE3082907B7E
+:100FC00088E76E2E4F4AF9584A278578C2E9815240
+:100FD000279383E9F2A7489F93C5B20AF83AE8FB42
+:100FE000D84E398C1CFC462E053C130FED6C52DF9D
+:100FF0007B8FB92C48FFAD16E2013C6F1D620B34AC
+:10100000D2AE3A7E725E4A17D247BD7F32D0F1151A
+:101010003379448D3C5F874F26C3296396F9248436
+:10102000827E437D514419DFD76E28093FFFDF835D
+:101030001CD37924AD2326958E1BE7279E4018BE2E
+:1010400010ED56D97A662804DB07E3E8FCEA54532E
+:1010500040A2EBCD97183FDBCC0D9E74DA54699F0C
+:10106000E34F27300F19E7A1D2F929747ED9BE18B2
+:101070002C0FF32520CCF1C5211CEE4BC7FA11BE75
+:101080001C84237DD9F87C946F0C96737DE3118EBC
+:10109000F6E5233CCF7721C231BEA9D82ECF5782A7
+:1010A00070ACEF527C3ECE3717E1F9BE3908DDBE99
+:1010B000F9589FEFAB4258E0ABC4E7E37D2BB13C5E
+:1010C000C1772D960B7DAB1116F96E4438D1D784BC
+:1010D000B0D8D788ED26F96EC3F205BEBB115EE825
+:1010E000BB0BE164DF43580F0A08F010CDE5F13681
+:1010F00075898B4A0A70B80A7C1C49EEBEE2F6A8D4
+:10110000D2E5390AF64EB4B3988857DB5EB43BCDCE
+:10111000611CD0354C7F3D5C3F7FEEFEE0BE51A4AC
+:101120008F6ECDA98DE544EEA397755749309DFE8E
+:10113000B36EF71C027A81E426EAF8B4BF7E60EB56
+:10114000EBE2FA6BABD2E991817F1B88DB4F1F95F5
+:101150004D785D827EB6A94A69200CBF8D8E33E33F
+:101160007BE7BBBC248ECE2F26FBF80BA04F66FB83
+:101170005D7F9A02FC9297F8CA14DADFD08D2618A8
+:1011800081AA1257C714AA77D46904F5E2362A72E5
+:10119000B0DE6DD17A7B9A1DC7EC28216DFB86A14C
+:1011A0003C0D2F60F6A7EB12902FCB4F86915BB3CF
+:1011B00041DE829242FBF3AF21E4116133A0FDE6F0
+:1011C000C5BF84FABEFE2C4C8E9AC9F3363A91EC18
+:1011D00056754A1485395B3CCF47D1574604BC53FA
+:1011E000A26979D4A3FEE7018E6E0B4C89A170CC65
+:1011F000EEE0F3D49C92B1C1AE29765A3E7F1FD95E
+:101200000B68CDEF54A73A6879FC21CF5ECA06A4DB
+:10121000B0CB3BD5A9C27C024D4E3A9FADEF1377C0
+:10122000232D177FDA2AC7120DFD2DC4BB53431798
+:10123000C784CE6909F49F19D7B9F265785FE98A46
+:101240008ACBEB4F9F6DB06E5827B5238FD0756555
+:101250007882924BC327657192A0437E1CD8A175FA
+:101260003D0AAC73DBC67807D22FDA550243F64C41
+:1012700027AEED2AF0B18278B26C1A86F22EF88E83
+:10128000E277F41C87166F92D06B356D7991F15B24
+:10129000F66F86DFF7383F47C2AF0D7865D2D9E5E4
+:1012A00078615CAF1C5F03788DD4AE298EC9A7111D
+:1012B000CFDB4C641FB555745CCAA74CAE889F3613
+:1012C000BD89F3F7D9F0EAFB37C3EB157103E3955A
+:1012D000A889A82729BF8E263991F50DF417CE7E4F
+:1012E000DDCEF94DA3E72CE02F36BBA89ECB89AC11
+:1012F000E7AE8E3B8BFEE27AC6C2F5B818EF413EF0
+:10130000DE2BCEF22DA0BFEC9B4C7E90B312E240C0
+:10131000B920A9899C4F5CD1C02733655709E81BC8
+:10132000328AA01F1D9317F0C33E65A85F2D90A1C0
+:10133000192865C0E390DCC0ADB4EB6CEA67289473
+:10134000FEB4AB20409BEA322DA6EB8E15F2E6AA46
+:101350004CD5CA9BB0F77DF228F8227EDBADD98C44
+:101360005FE750FFE56DCE6F7DFD48D86EF3DA2163
+:10137000DB6ED5E8C16DA9A95816ED23F1EF19C1AF
+:10138000BF1B37102FC8C7E4F07EC31B7132E7DBE9
+:101390001E0FF0B9FF07C405FE4CDCC60F503FC559
+:1013A00051FD24A17E62E367F8A27FE9A7E53FC76C
+:1013B00025737DEE8ABED2F1FF8E9F7F45110BF320
+:1013C000183AD9D521D3FAA1D40EA920A793E9DCE4
+:1013D0002700BE2C487795303AAA934900FC5E8AD4
+:1013E000B7A009F4AFC911003B63B1B47A409E893C
+:1013F000250ED7FF8AD37B346E00B970C5A8F9409B
+:10140000D493715F95DA29FF6DCE764543B99B96EB
+:101410005B52E9B8F15D84979BED283FF46F085269
+:101420003148F706601F45D96383F6C37ACB7E281F
+:101430006F059FE402DAFF5D67F66DA488991BE7EC
+:10144000E989637C7D12F8DA338A6E5073FAF8F911
+:101450006CFE8090CF3E7972E50B79AACC437DF883
+:101460000DF42FFA8BE4DF3CC3F5A7237E60FF4623
+:10147000F0FD39FB377CBE7F07F92F8C2CFF51FB29
+:10148000DFD8B28396D7A4CAEA71EADF3986BCD521
+:10149000A9D0B28DFA9BC768D964EB54A05D1995A9
+:1014A000503BC5B7873A79B0FFB04D6065F883FD12
+:1014B000C7C956A994E96B35F6F2B103E13180F35F
+:1014C00059936AC1F1A2460C8F05B97272BE228A85
+:1014D00014003BEE2C76298BB1BF2E7219EDEF3C38
+:1014E0008E2721D7A0B79ECA03BD14AFC07EDD6A88
+:1014F000237E477C5FFF508E2DE8D34F84EFE3AE11
+:10150000E57BA6D60DEED8E120A707591CA5F52648
+:101510002697651924B001F48487A82EDA3E8A88BC
+:101520003F2AB8B46CE6A5995F4BC443E77FE06BF4
+:1015300019A1349C041D74BF57E69682B00FB4986D
+:101540006C01B0A525436CC40265A7296005F9F8B4
+:1015500040C2755A0A6202A0FCA60D298EEDA2EBCC
+:10156000387560AFDD1B86FE57792BDDD3C647C6C5
+:10157000636FBB052FBA008F0FA91B5DE047FA53BD
+:10158000158C3BDC024D357AFDEA786637A93F348D
+:10159000379EC2594B7A365A80DED989E80F91E1DD
+:1015A000F1C8B769A9BB6E29019355CBFCD321249F
+:1015B000D0A8F5AB047FBD1BEF5D104FE143DC8E7F
+:1015C00050B1EC1C09F1AAD189F1E09796D40F69CA
+:1015D000077FF781F5C4BDC48CFAA01CDA7B12DA50
+:1015E000F2817F1F72EF7AEC4EC0A795EE8B418F90
+:1015F0008F3F6C5729BD2A0AF726C17AFE6498BF2F
+:101600008015BE9B102FC67DF0AA78BA0F068538CC
+:101610008E8C837DF029F7DCD820F2564258F9AE43
+:10162000F0DD88FD88FDF07BE660A62BAC1CEAF1BE
+:101630002DC6AF90D8BE969825A6FFB81DA5FA6511
+:101640003DE097BE8676D36395B683BD39E51EEF40
+:1016500006BB1D49DF88F9503C8E287784A997483E
+:1016600079383DF1403CB3D71566BA5FA0F5D2EAB0
+:10167000C206985785C32E01DF89769BE2993D13F8
+:10168000FC2CE25572EC3785407F880F865BFF2289
+:10169000A27CA98D476D02594B62F87287F15722DF
+:1016A000E1EB90B9B50CE67568A94C1A693FA7BC87
+:1016B00013534898F7057C07F886D2A53E818DD74D
+:1016C0004BCFE1E1F177687D8D7B9AB98F9EFDEA82
+:1016D0002BA3E681FD9E0778D48CFB0AC7DF3181FE
+:1016E0001FAB5775D17ACBE27B5D642CE8A92F0B39
+:1016F000FD0E888BF5FCB611E8FD5307C62BE655A9
+:101700009E2E6C1CABC167314123B968EF032E9547
+:101710003E9F37626392DF1E198FC7381E6F8307A3
+:1017200093301EF322F2CD20E331242F1EF98DECED
+:101730008D7207211EF917D90D7E038CEB45FDC96B
+:10174000E2C9D7B9D8BCA20C7EDE3C5F9D4EBFC4B7
+:1017500084241248D09495368CCFC684147C6E9421
+:10176000B75F19E44DE03F123D05FE8DCF9FE7784E
+:101770003F54B95C85B8A1253ABC1F9C96C0E824AB
+:10178000CA6FADF7EAC6FBEBB7B26EBF2CE07F7352
+:10179000FA9EF24E4A8178D53C8B7FC460E45CE0CF
+:1017A000E7AD6FEE7741BF515F59C3CA5F37B74F9F
+:1017B000D49E365FA16AECE9D5F246C07B8CC2F5B7
+:1017C0009B41EE3C6057293E2F06BB4AA718731673
+:1017D000BBBA88F83B208E6C1C5FD853237F09FB73
+:1017E0006AA49BE08384041E37E4F41371C348F2B7
+:1017F00025E4EA5DE0DBC2FEF837C2AB2C7ABF47D6
+:10180000C013BDF488227EAA1FAF2D91034442FE6F
+:1018100040FB78E85E09FDCD60A515ED72556514B5
+:10182000C667ABF265ACAFBA5D46FB19A4FAA196E8
+:10183000CEE74F5C4F18E3B32544724FD3AC7BD651
+:1018400084285DF9EAA577FF693DC4978BCD2A8C82
+:10185000775065F166BF4746FF95F6E10E427CFA88
+:101860009E8BDC60CF043F1CF4C8286FFE376537C1
+:101870000CDBC9E3D1079BF30332D059F2F68EA3F8
+:10188000E640FF552AD0E1EDD42D2ED07751DFDE92
+:101890005F5E8EFB47AF9A8F76933AAB74DE515CF6
+:1018A0004EA70E29BE12ECF891163381B8D191756E
+:1018B000A7509EBBD637B8A78DE88B2F8BF8B031D9
+:1018C000CE6C8C2FF78B2B1BE2C9821F8C7C725540
+:1018D00004FE10FA2A127F503DB630E19FD06342D9
+:1018E0007FBCC3D73975C896DB1B291E6296C88892
+:1018F00007C1976F7F73F3CF410F4751FED800FCAC
+:10190000FCEDAF5E847D08592E858D23FF07E737F8
+:10191000BA4F744FCBEDA3CBD5DEE5BD6510FFF913
+:1019200035AB7BCBB07EA35D89ACD706D65BD9093E
+:101930002C0E6EB43B4679F8BEEDCEBCCA7B73E18B
+:10194000FD79954B03006F1962AB01FD6BD4134613
+:101950003B21E6639C674C482681F1DA79ABD8AE2F
+:10196000CF4E58B0DE67738E0367FD4C14837E70D4
+:1019700002C12F7D3F2AD084E3359C5F8EF36F98A0
+:1019800008D047DC5D7E585F6A34C60F5A33587BF7
+:10199000F99268E68F4F88C775CAC221FF320ECB15
+:1019A0004D7C0DE3E2BD4F02BF35794C5170AE3036
+:1019B000D5A1EC87904BEB1413B1923E3C09FF9DEF
+:1019C000406480AE17EB24D877E6DB2C39E89F3EE5
+:1019D000930074B889EE0B29BF1F3820EFDA4697C1
+:1019E00078C03D3E369C7F2EE082D4B5A817AEF479
+:1019F00055213CFCE3BF6681BC5E2F793B605E9D58
+:101A0000F3AA6E2FA4F3A9DF2DE3B9D282EBDF1E78
+:101A1000C9F669FAF349D969CB85384A9314ED06BA
+:101A20003D22F0D8E1B0A07E693ACCF460D3518970
+:101A300097D93EE2055E7FEA3D07EE3304DEE97AA0
+:101A40003A613D9EBBE3703D629FF12FACE75DE8DC
+:101A50002FF27A325CE80F005FC97DF3971D0AAE62
+:101A6000AB9B44BB61FE3E1E0F22EF45A1DF2CE87D
+:101A70005BCFF94FD0B78ED3B7BBFDF41D17D2F6AD
+:101A8000AD9E783C65903309AEB7FBBD18E40FB14D
+:101A90005ECA07DD80EFBDEDCC4EB4BEEF60F872DC
+:101AA00014E5C2FC847FED4A607EB271DD157C9F37
+:101AB000FE7502D34BE0DF429C6271FC94AF130AC7
+:101AC000C3B4E77E2DC5F3B780971217F93240FAF9
+:101AD000F02CC611E38AF7A212F5F255C1E30AEF22
+:101AE00099C93C8CD3D2710B34F35B1B5F12959870
+:101AF000D47FDC7F818E898903F2A59E8EF58ABD15
+:101B0000598A25BDFB620CA5A9FDE5DC2867527B3F
+:101B1000C757703E6F94FF33A60622D17E6F90BDEB
+:101B200087E2296CF2922E6B4E7F79389B1EA1F4CE
+:101B3000CE4B4CEAAF4F064BE78989FDE83C31714B
+:101B4000003A0F8B2F9F04F5B0FEF402DCE75D082E
+:101B500065D0139661381EF2654F1C096CA78D1273
+:101B6000781C45CC07E21251F4BD1F256623FD25E4
+:101B700085F8CDB49C90EB9640EF0F820F7EA49D2C
+:101B8000DFF7C007570CCC0741F44B56717AAF1200
+:101B90007916BB06CEB31804DDAA60DC3326778F36
+:101BA00037FBDCE956D79F6E7503D3CDBB1AEA9B92
+:101BB0002CE44BF4C38B2B5361BC579C9EE3B1F4D4
+:101BC000F99E46AE4FB229DD68FD8B8932EAAB9FA4
+:101BD00091F3500FFFC064C2F97753FDBB3D3B1C2E
+:101BE000DFFB9578FAFE99CB089EC7D1F5F9195F0E
+:101BF000FA25787EC3226282E7A96A23319D831E7B
+:101C0000BA8DEB09CD3A6F4B0C6397357AE80EA885
+:101C1000A7FC781DF0A34D752903E9A107CF5D0F3F
+:101C20003DF83DEBA14706E6BF73E6AB27C3E903EA
+:101C3000C1C7625F10295F88CA23498FEF3F2E21F9
+:101C40006E3C0F2B71DA98DDDD29A19D6D3A9AEF7C
+:101C5000C5B2C3864A41D8E193BB58BD3C25BC3FC1
+:101C6000F86C623CF2EFAAB6D56E459707E2477A68
+:101C7000DCE939E91A4EF5E20CD98EEB4B2863F119
+:101C800043B17EAA67674E4FE67153BA9E844C8675
+:101C90008704EA0FC0399A93EF0F628B159DDF2FEF
+:101CA000F076835C2E41DC3B2E9140DA0DF5EBD7CC
+:101CB0008D82F3FB388FBE7D1269F942C64108CA96
+:101CC000433CB5DF10C74A2835B4837DC83868AFB8
+:101CD000799EDD7F3F713491EF272C2415EC0A911A
+:101CE0002B06E41BCD7EE244E220F6139F278AF305
+:101CF00071BDFD6A8B2261E302EB92B8DFFD651CCA
+:101D0000FABF32B75BD3BAB2313F658D43C5788134
+:101D10002CBB6D33B3FBBF1FE7311155B3BE84D26B
+:101D200068A26AF60F49E5F1BA72CABC21BAF6692F
+:101D3000DE61BAFAF49AF374F5990D05BAF250DF40
+:101D400005BAF6D95400B4E59CE61FE9DA8F68BD00
+:101D50004C571EB5E51A5DFBD181C5BAFA318FAE7D
+:101D6000D0D58F6D5BA32B9FBFFB27BAF64D3CEE02
+:101D70006BC4CBC5494C3F37294CEF34DA0B301ECE
+:101D8000D964D7C723D338FE4B6227E7421CBCE98E
+:101D900083FC5CC0F70BCE0B302E1E892F8C7A2C67
+:101DA00092FE343E2FE6E37DFEBCC5047250B79729
+:101DB000CAEBF9B46C7F6733ACA9398F9DA72A842D
+:101DC000E5F788F315F17EEFF98AE266F155A79DF4
+:101DD000DC1A862FD292F4EF093D29F82812DE048E
+:101DE0003F9E0D6F9EEF096FEF49649E761E15FCB6
+:101DF0003CDBF8DEDA24133F0FF65E93C4FC9D094A
+:101E0000D1E889BB501ECF55FF8B7950FDBF3409F7
+:101E1000F7136F2CB801F4FF2EAB1BF6649FCF7B3A
+:101E2000A3FA7E15DA57B3F626772ED02552FC7B1F
+:101E30006D52BFF8770D8B7F47EBF0B64CC8BB21D6
+:101E40000ED7E4FC1AE3DF4D1677EE60E2DFCBA09D
+:101E50000F383FE474EEA52F8F9F47DA07F908D9B2
+:101E60002FC1BEC7AEA870CE75B67D2DDDCFE6C240
+:101E7000796A2BEC9B34FB1CBABFE5FB9B28B40BA7
+:101E8000D4EEDD9184EB22FB55FAFC0CDDF7DEAAE3
+:101E90004251D83F8FCE2FB712B7CD22233DEFC18D
+:101EA000F76E22D745C9102F0B1E989CFD2FD9F332
+:101EB000FF481A707F68B4AB673D9743BB5346D762
+:101EC000BF218CDF653C87EBF5BFC14F93F03C0E23
+:101ED000F1B489DA45388FEB4862F679D361B64FB1
+:101EE000DE74744E2ACA4D52D180E77083D5371DF7
+:101EF00049FDFCB58EA401FC35B1FE357CDF3B5DB0
+:101F0000CE6B8378E3C99005F12613961F59BFCF96
+:101F10004C02484F96672CE8680E6DEE04FB6C2669
+:101F2000C6BC623516D66DDE27A37E2289ACDE4F95
+:101F30006C8DE0E7C416EBED569C476FB7124AE391
+:101F40000D764C6FB752E6E9ED569A576FB7D26BE4
+:101F50000A0C764C6FB786FAA618EC98DE6EE5345C
+:101F60005F66B0637ABB356A8BDE6E8D0EE8EDD6A8
+:101F70009847D718EC98DE6E9DBF7B83AE3E3F78C6
+:101F8000ABAE7EFCBE9FE9CA859D0FEADA2FDBFF70
+:101F900034E6DF4C3CB45DD76E52D7AF75ED28C246
+:101FA0003B214F7B099284900B4F3CA5AB5FC2FD58
+:101FB000B48B7A7EAFEB87B4B27C6B3FFD0FE8F554
+:101FC00011F15AC0395148CF4BE994AE7501C91D82
+:101FD000A4CD96EFDE5904F3F8E4FD4BF6413FCB78
+:101FE000B6E8F3B49707F4E57A322C16F4433DE5EE
+:101FF0008B00E5939590BFADD16B2B498313F321F3
+:1020000006C967CBF6CF2598F7E9F774427EBA5830
+:10201000A7E0370FE737313FB1DE95D4EF0BAA7D4C
+:10202000EBF4D0FFD83EB2CB027C5BBD5B220F4A03
+:10203000FDD753D37ED7E6F430EB32AEC3E877BAA0
+:1020400093F5E754D3653BC6F54FBE29BB597C5089
+:102050002F876BF6B378FE9A27248CAF19F121FCF9
+:10206000D2487891FD6C9F509F4802018DFCA91CBD
+:102070001FD654BDFC9D847FC07C1E960390171410
+:10208000A5461BF9AD2848FAE33926572FA7463C49
+:102090003BDC43C2F2954AFF83795413762E65E404
+:1020A0002B23DEEB76DF6501BD78AE785F64C0BBC5
+:1020B000383F28A1ABB584C9831378A5FBF2A5C925
+:1020C0004991F7ADAB9325FDF9F2D9F7ADAB93BFCD
+:1020D000DFB8C9BAE401F6ADDD102FA37EA5315EED
+:1020E000D63F3EB6F72BC989716816FFF2BA6D2C40
+:1020F0005FC5602773537576B277DFFB8114680282
+:1021000039767A6E83F9D43A3D2D007FE4F4DCAE63
+:102110005D6F13C50BDECFA1766A6718FFF0E5642B
+:10212000E11795635C6453096B6F6CB7335941BC1D
+:10213000772415A5A2DF79349FD94F47D1807EE758
+:102140009DFC3CE736382F1CD197C7733B3F57A106
+:1021500062E701BA6D3297A76AF37CEF498EC3F14B
+:102160009C939EEA847CE72697C925A9E03F9BF0D3
+:102170005C74A3C75EBA2B8FBD97A87B8FDD3B92A3
+:1021800001DFE0CFDB95AFB57CFB32C525F41B69E1
+:102190009D2F27337FD74C3C36D0BBE23CD7FC4148
+:1021A000BE0DF4AD22B95DE1F238CD3C4F6A0A3F75
+:1021B000CF955DEC7CB757CECF922755E7F4BE9410
+:1021C000ACF117C4B9EE954ECFCB404F9FE2B7822A
+:1021D0007FE9B385DFFFFE89D3F156BE3EEA682270
+:1021E0001FE1F8F2A0E2276F25635CCE8FF98A37F2
+:1021F000C8EE13109F1B6CBCEA6872BFB8DC512D8F
+:102200001F1AE58FFA9FC763E17C22768882DB097B
+:10221000C59D0BFCDF0CFF9E84F1D513F07EBFFC47
+:1022200053359EE7D3AA03E6D38A7EE6C679BA93EE
+:1022300059DEDF17003DA35C1B654D3FCEB3F44371
+:10224000F194DB601F14FEFEC1F0E73EC18209E796
+:1022500016D78C4AE9E73F46A50CE03F9E393C2A59
+:1022600016CE9345DCCAD8CEE64BC8D0DE8F698E39
+:10227000D38FBFB9809513F9B8CB6319DFE7F2B2FA
+:10228000C80314716BDB4CE281FB0E3FE3F9D9A26A
+:102290009FDC1407B68F8B9F929B5208E76912EE62
+:1022A0002B37C749BAFDE5F1E4925C58CF30DE7FA9
+:1022B0006E0AE3D36DC3587CC69807F9196FFF59AE
+:1022C000F214849460A3019F16590E8BC7B1296C38
+:1022D000FEC76359BF227E56752FBBDF25E26622FB
+:1022E0000E483D83B762A85E39D6622610D75A2AB7
+:1022F000DB37031FF6DE9FE3E7EA2EFA1FD8CBCACF
+:10230000BC72CC3FFA57EF6F013E63E2FBDBCBE9D7
+:1023100029BDF6D27D8EF7B86632FC0CEEBCBD2B23
+:102320009AF16D8FC38EF16C63BB6A4E9F161EA728
+:10233000007D0D76235E260DE1EC4735C7FB99C382
+:10234000560FFA31A5D198CF21CE3F14CA9FB1F1D3
+:102350009806EE0768F3A567C07DA2DEF30F95E04F
+:102360007B09763BBEA7A824E8802BA18A5B82FC70
+:10237000B22E4BD7A61498EF45921BEE0FA454B87B
+:102380003A5212E11EA18A62B6399B388BA13EDF18
+:1023900084F57197BB369B21EF5A2570924DCC7412
+:1023A0001C071DE78E946C5C7F8B7F6E470A6D1750
+:1023B000ABF6906179A0475C3352418EE7B1FC7572
+:1023C000E3FAD6A730BCD937D17D03E0430D9F0790
+:1023D000BE3E85E501513D7313D0A34425BBD8BD56
+:1023E0002896870A69D6982FE866F9D231906F94BB
+:1023F000C3F40CD4DF15377523C88F902F99E31BD6
+:10240000F85E9B0F7F07C77782413E053EE9008D4E
+:10241000900FA1CC24C8D7B32BC2CFF7314EE77AA7
+:1024200067F93D30EEECC98D98E74EBEF9EE3BB949
+:10243000089C5E2627F47D027188A844A67FA354D9
+:1024400015F531714998676A53DD35508EB25FE0FA
+:1024500092C1EE59F979E1121351A8BC4DE5FD780E
+:10246000E611E9C35C166765FA55211F0AB9903970
+:10247000728AC07EB23FEA17B5C4D0F54CB51FC012
+:1024800073C4A8E10D2570AFE0C545AC8F9F45C86A
+:10249000DB3FCEF558BCEC4D35814F4F8EBDFA4237
+:1024A00006D2F93CB8A179DBA6C3AFEEBB88C7CF93
+:1024B000215FDC7FF8554FDE3F9F5FFED2FD875FD7
+:1024C00085FCF27F9EFFDD12E8F1E394B160DE4609
+:1024D000FE17FAEC90EC3D7423C5FF1594A97C051A
+:1024E00000155281F466F94397733CFBBFA678B69A
+:1024F000F5E1F98AF6FD88BF43663A6F3ABE790A7C
+:1025000043B5F927B13C1F2380FD5F696B9D0EFE2B
+:102510004DB7A5671C8CDBFDDC5F33FD549F1CFEB3
+:10252000E92907A1FC7744E971C0F313EBDE707869
+:10253000E87A0FAF93F1FE1BDE4BD6E4039DE07CFF
+:10254000353DB5FC08F0D5A2F5DF1669FD6CE24B10
+:1025500042BBBB3C20C31DDF5EFDB7F2D118CE7479
+:10256000ACBCAA2D415716F6789535FC3DF1CC54FC
+:1025700046F7E58F6FB3403EFCF454EF1730FE0989
+:102580009E6F70629703F757623E8B1FCFB7C07E76
+:10259000F248BB950481EF954E33C1389567A64448
+:1025A000F9D6CBF9D038CF97F6C4607F4BEF953191
+:1025B0008E5449C7F251BC7ADB97B3FDAD611D4B18
+:1025C0000FAB33405F2DBD45227E95B55F47E9E6F1
+:1025D000F5DD8CE72BC6751AEDCB69B2CE027AC455
+:1025E000685F961077F364B05BADFAE7CBDA6FC340
+:1025F0007E979DE53C262195DB9B2232F1BB1C8812
+:10260000330FC37CC148F6E6C47A26941FAFB721C6
+:10261000FC74BD0BE11150A614CF2B7777BC948EC0
+:1026200062DD590476286AFF54DB35A4CF7F56B6A5
+:10263000CD0D3EA4025FEAF3212B389E85FFBC8CB2
+:10264000DF33389BFF5C01EB1C201FB26290F990D6
+:1026500027F78DB7C1F3C2547E3E3591E203ED6F8B
+:10266000DE6B2A39BBFD8D849748EFAD82EF1C8469
+:10267000C1B3909B23DC8E2CD93167F3103A81A62D
+:10268000E73ECAEA42BE647108714E25A76EEE8429
+:10269000F5CBC410FFF3933789867F8DFCB98CB8D6
+:1026A00099DDB1B3F76C3C2ED1CB97EDB7235E0526
+:1026B0001FC18D02532AC060AAA9B8FF7703FA7D13
+:1026C0001FA0555FFEDCDC95057A6399215EF0B9A9
+:1026D000147EFFF5C3D4616CFDAA6706E4452C2582
+:1026E000E59B595CBD159F9F505A5FBA11E479076D
+:1026F00093A755CF3EF10CE8A915FF79AF13F4D499
+:10270000DF94D66418AFF6914D4ED0EB2714BF136B
+:10271000DEFF5B400E7B5F777BAA24F2E2ED901731
+:1027200056872C0602E69F057AF2BF1F31BB208E2A
+:102730005AFFA83568A5F8A8DBC5F048CB4759F97A
+:1027400066C457FD6EBD1CAEF8D5BDC92AEEE7FDC7
+:10275000E91C7FE9A0AAEB7698317FB4EE4DD90D44
+:10276000C3D4931E5C9FF17D984788D2ADBE4DAE19
+:10277000B4C4F6AFA71E8F05E4AC7E17A353BDC14A
+:10278000CFACE17AD9C8EF3F1372CFF99CE205E3F1
+:1027900061229F9504987E6E7AECFE7147E9BC3EFB
+:1027A000DDF1AA53CAEBE377025997145F27DBAA3E
+:1027B00016419E41243EFF9CCB45AFDEE77646DDC9
+:1027C0004D2706BE7F3B83B5E6A0F3428A8FDA6DC4
+:1027D00066B79F3EAE7D42F6D8C14F7ADB8ADF777F
+:1027E00058F9C48B6F5D40E7B772A73971265B86D5
+:1027F0001DF4B3A0533DF077411F5D563CFDA2058B
+:10280000F220E1F9BAF83EFAACDCD96181BC4A2386
+:102810001EA7B67558987C19E8D4767406D8E5A634
+:10282000C7CE58800FFEB64722E0421ADFAFD9F676
+:10283000A213F407E009EC87A0572FFDFAD12D3839
+:10284000EBF713B09D0BCE6922D1EF5A984B12F2E1
+:10285000F793BFA7E3D7BC6375C3FA6B9EBCD609D9
+:10286000EBF84869607CFEF34DC9608F6BCCFE6469
+:102870001742F6BC66EB8F91FF96BDFEE364827A49
+:10288000D39306F24BD79906EB5BFAF015B8BE6A04
+:10289000E245FEABF9B95C0E7EE269859486F3F3FE
+:1028A000D3D3989C7CB4DD8A9B828F2C847D87E374
+:1028B000CF32CBE323ABD10FF9315F2BD5C4583ED8
+:1028C0006D6374EA4E357139637AAC9EB7AADF71D5
+:1028D00033EAB18F333D2920EF140FFA78EAEBD3B6
+:1028E00053B8FEC3EFA5E07B94EFA6C27368DF691F
+:1028F000F6448DD3BDC7F35AD9F8D7F1F1E9BCA39B
+:10290000212EF751B27EFF2AE02569220E463A8930
+:1029100096BF22C9FD8E5B90AFBE7C93E995BAC08D
+:102920009C52ACEF340753A03ED071B9847A81FA3F
+:1029300017E1E47A8799CBB5BE9ECE5391B4F8DD0A
+:10294000C3EEC555DF43DB69FC903EBEB1F43DCF1D
+:10295000EE934F915FB1CCE09F0968D40B49697A3F
+:10296000FB27DE270F2785BD87D5A70FFC88B75A21
+:1029700073E0970F821CBF6DC57B86B54F98F17BC6
+:10298000399F3CBEF7AD6B28BF7FD226E457AF67B7
+:102990008DF25BF3D415249CFC7E92584EC2CA2F54
+:1029A0007D1E567E1359FEFEFFB69E5D1641CF5E1C
+:1029B0009CA6D7B3D49F88BD90163FFEF5CAA1B898
+:1029C000CF32E055E0D3A8370FA5AA885FA3DEA4D5
+:1029D0007F6F120D1E05FE045FAEF8CD2A1CA7976F
+:1029E0007F057F0AFEEDE54FE37AF57834D62B704C
+:1029F000E7A8B08FEEE60D747F0DE7AECFC978EE95
+:102A0000DAADF638E3212ECBF36EBA5DBC1CC7CA33
+:102A10003D4996CDA03FC4F39E289687D05DDEE366
+:102A20008CD3F8F547DB6527E4D57705C2E74B6023
+:102A3000264512DC128D54DFC8BF5B63CFF2C1BEE6
+:102A4000AC959DF72C69BCCA09FE74777BCEEC79F6
+:102A5000E0C7EF97D1A7EA8EE6F9557E8F9246F14F
+:102A60005AC5964C4E10FF7DE06757B5AF9C099B49
+:102A7000C6252D7A7C54DB2FC7F3ACEA7BCC7D7C5A
+:102A800041C0DF0958C0CFAA7958FF7C05E4550141
+:102A90007D0C7CE4053E0A730FA359F0513EC967D3
+:102AA000FB647E5EC5F5DA74396FF63CC85FDCC73F
+:102AB000EE499C6C97C96658EFE3FCFCCA9F84FC06
+:102AC0005947F9581BE7FC14F86C5464FBFDE96F97
+:102AD0000F17DD489BD43EF3EEB88728FCF499B776
+:102AE00047FE01CACFFE35EB5DD2BFFDD43D5F2D61
+:102AF000C43CCA3D5602FBA2EE3D2F67DD08E5DF70
+:102B00005BDDA8FF37B0FDB17F8F03ED7A7726F349
+:102B1000FF9A9E3B33AE0BEDD346A4D7D369EC9E10
+:102B2000EAC9F6BFBF2F413E5D3B5D15D85DBEEFE4
+:102B3000AAFF7D14EEAFBB9F3BA3DB57FEABEBA917
+:102B4000E3F795BA1D641EDC2FEE8E63F73BEBFFB7
+:102B500030E917705F71D5AE0E4B15AD9FFAC76F98
+:102B6000C781BEE97E8AF913D4BFDD0A2EF59E0720
+:102B70000EB49829FD3E079F6F0821573D682F83AB
+:102B80007B18FDF1C2F0D04DF100EBA278A9013D18
+:102B900019091F7FF9B7C5C7170B61FCDAF689045D
+:102BA000E2E97D78913CECB903F32EE8FAD9F33DE4
+:102BB00067C6817F74B6F59E4A63F765FEAFAC3792
+:102BC0006EC8BFEB7A19BF3F90A6E23C8D7CDF9FB9
+:102BD000AF9FBD1ECB4F3ADC38DF41CA7BFE90FF72
+:102BE0005BFC3DFBDF76BD67A3F77E4E6F870BCEA8
+:102BF00053BA9FFB368B9CC3BAEBFE3F5D77AF9F0A
+:102C00006372DB26D0F9BD430257944891F3381F15
+:102C10001AA2DF47CCE27EC4ACC46AF41F667958BE
+:102C20007CA58914EC837B6A7E8F8CE70E984C43DD
+:102C3000F1D079797E00F3B614FF88FB208FEBCAC0
+:102C4000556EF69D2FFDFE6A56726929F86F071BB7
+:102C5000E9BC68BB830E93AB892E61B647467F8F74
+:102C600042F4F3FE32E552CC0B995DACDF675C6356
+:102C7000D8375C354F5F7F25D99E04F97757D698B2
+:102C8000315FE80A43FBB5435CB8CEAB48C32616B8
+:102C90009F39373CBDCAF1D41F0F03E3AD1F9EF827
+:102CA0007E127379D4FE78B37AD9FED24A2BB8BF9C
+:102CB000C5F3E4D60C0A9F84EF3BAD7C68815FAB23
+:102CC000877DAF53D32FE245E0FD5CF12DE864C46E
+:102CD000BBC0AFC09B910E5BE14C42E38FF74191CB
+:102CE00047E225DA7CCB59BD7EA31DF1F8DA0E76DA
+:102CF0005FE1B5E2AA967C283F2EA1BF767AF278F2
+:102D000062A3EB3D6826BBD9FD2F8FEA2AEACB6789
+:102D1000918A5FC67305C827D4EE4B219F50BB2E06
+:102D2000C827D496219F50DB1EF209B5F5904FA815
+:102D3000AD877C426D19F209B5ED219F505B867C11
+:102D4000426D7BC827D496219F50DB1EF209B5F552
+:102D5000904FA8AD877C426D19F209B5ED219F50C7
+:102D60005B0FF984DA7AC827D496219F50DB1EF2D4
+:102D700008B5F59047A8AD87BC416D19F205B5EDD2
+:102D80002F0E3DAF2B97905775EDA7DADED095A7A4
+:102D9000BBDED5B5FF61EA315DFD25EA27BA7A4190
+:102DA000FF4B734FE99EC39985BF08F631ECAFCC5A
+:102DB000FD775D3F0A29C738B3853420B441FC96BE
+:102DC000C268D286D04EC51CE0F491DE11E9C0AFD6
+:102DD0005BFD9B81B90E4E3A9305FAFFB5C9735955
+:102DE000FC819F13CC867FAA948963BEC9807DAD88
+:102DF00038F7748664121C4FF930242174856248B8
+:102E00003081F261280A617C28019F2784E2102624
+:102E100086D2F17952280D61722807614A281B6118
+:102E20006A680CC2B4D068844342E3F1BDF4503EFA
+:102E3000C28CD085F83C3334096156682A3E1F1A8B
+:102E40002A41A8862E45981DBA04E1B0D05C6C9743
+:102E5000139A837078683E3E1F11BA1AE1C8501564
+:102E6000C251A14A84B9A19508478796233C2F7483
+:102E70002DBE3726B41A615EE8467C3E36B416E1B4
+:102E8000B85013C2F3438D08DDA1DBB05D7EE816B8
+:102E90008405A1BBF1F9F8D05D0827841EC2E7853F
+:102EA000A1071016857E817062681BC2E2D06F1088
+:102EB0004E0A3D86F082D0D3F8DE85A19D08278793
+:102EC000FE80CF2F0AFD0EE10F427BF1F9C5A10E66
+:102ED000849ED0ABF8BC24B41FE194D01BF87C6A6C
+:102EE000E87584D342EFE2F3E9A1B711CE081D43A0
+:102EF000F8C3D05184A5A14F105E12FA1BC21F85E2
+:102F00004EE17B9786BE403833F4777C5E16FA0A32
+:102F100061EF7E7F72A47B895ED37710D7B2C70F33
+:102F2000EA3B5F846CD19D4BDD1FE3443D397B1D43
+:102F3000CB23D95C726A1AFAB5ABAD2AFFBEA641A3
+:102F4000AF7E6307FF6113D4A4B13E200F7001E789
+:102F5000DFD78AF72681BFB4B9A0AB16E221B767E5
+:102F6000775500BC339DC5573773787B3A3BCFAC60
+:102F700018E9C272C5EA11787E451207B78ED78666
+:102F8000B0F744FBBA4C5EB6F764E1BD8041F6335E
+:102F9000D87667CB8FBA2EDDBB1DE5BCDFFDBC410B
+:102FA000BFFFEBF4C27FE9FDA7067AFF08A7972BC6
+:102FB000A3FC199CA7E21907F55336A4C989B49F4D
+:102FC000CA16C90576B26A63FE0CA05F01F1603CC7
+:102FD000714184BCAE7739FD16379809C41517AB1B
+:102FE00004E3B98B77B13C5F88839651BEA8E17C3E
+:102FF000B1EA969D1670416B1A96B1FCA3008B3313
+:10300000D9E87FC0CF2B5AE660FED1CA47F5F1A7B9
+:103010005A88EBC8708EAC7F5ECFE34CC678A53182
+:10302000BEF4663A8FFBBA59DE11913370BDA7E941
+:103030007A219FC37BBDC306FA9FE201CF49C4FA40
+:1030400045BC52E081F4BFCF8079A127F78DC03C09
+:10305000B593AA9A02EDBC549C3AED90FFE09D080E
+:10306000CF29FE309FA4A73106F3918E527DAE4248
+:10307000E293CB3B11BE9FD6F54E26E1DF6FD49F86
+:103080001BD85A30FFBAD24C07A6ED2A1F49C0FB05
+:103090008FB4BF71BB211EF98819F381FC644D2ADE
+:1030A00029EE7FAE50BEC98CFCB178771CCB0FF3F4
+:1030B0007BDE847C7D418FA31B7366405ED1E2E69C
+:1030C000EC7C0CBBED36A39F27CE4B059DFAE74564
+:1030D00097C7C2F7115734BF8EF4A4F4D2D5D7B630
+:1030E0007C81F70728BD8E47A0D7F181E8159DC1E7
+:1030F000E3816E912796177B1554AE4B4039ADD8BE
+:10310000101CD1A0E147639C9E64D8F1BEA3C827E0
+:103110002E1DC2E841147732D0F5544B21D2CB4852
+:10312000A7D27F54213DC83B0EFCDEEE821CB2E8E4
+:1031300032FA7C118F5B2E68BA04FDE79C0CE6D74F
+:10314000BFB61E722D09797DBD8D78A8F3FCC67AB5
+:103150001796FFB23E15CB7F5DAF227C7B7D2EC2E2
+:10316000E31696CF23E4893200E6D58DCE60723423
+:103170003A43ECABAE4B85B874E93FDE2884FC9E45
+:10318000247FD2ACE999E877EBF234E65DAECFC3A9
+:10319000E832F33CAF5B24377C476571F985BAF6BA
+:1031A00024777C5F19EC07CF1B59DC1C87DF6FBBD2
+:1031B0007A6682AEFD95CDE9BA7249868AFA754E75
+:1031C000698EEEF935156374E54AFEBB09C4166DC8
+:1031D000D29E4F51CAB23C6F176BFB65C3C4941BA0
+:1031E000E8F85F1E3063BD911EC72D7EDC8FFBB7F4
+:1031F0005BDD60874EC03D325A3EF11719F5DD099F
+:1032000033F1BBA8EA3E21918D0089C2E4E9F421A3
+:10321000264FA5FF9009ECC3C9AFAD787E57B545E1
+:10322000227EB843D543314FC7BDEE312BAE7BC9AB
+:10323000169978F1BE92DA06E7D6D73D32CA0DE785
+:10324000960B728299706FAFE7B751EEEDB4B6AAE4
+:103250008BBD7F82EEAFE3202F492AC0F383CFCA14
+:103260005AAB4D906F201F480239FDEC2919E32914
+:10327000CB57FFA5C8057AEDA5B6B78AE938C75B75
+:10328000651CF79347ADDB6494774F0A7CD7B56F25
+:10329000DD018C33BC945ABE2283F2C1C7D5817143
+:1032A000A877D6B1F8767FFCD0F502BD815F357A7C
+:1032B000ACCF6EB17332AA7CD2403F5499DD786EA8
+:1032C0007ABCC58CE77954FFE3F9FFF1D60413D338
+:1032D0003F4F21DF2D56548B76DCC52DB287FD2E56
+:1032E000846A81F992BB642F99086596AFE06F9666
+:1032F000BCECBC464FDF6B574FC4FBC5C6FC290175
+:103300003FA732E5D59C03AD788E9DCF92095D8AAB
+:10331000367F5CC457482AEB5F7CC7A776D8FD7719
+:103320004CA6F0A4877D72F0F40E07EAC74F4DCF8C
+:1033300017DD40E12765FE0F154A9706D97B5F062A
+:10334000E4EF985AB64A782E72EC0E388FFFF809DF
+:10335000B31BC590E76BADF8F5F2A103E507C10C0F
+:10336000D8F97230594A85AFF212CCDF984FDA782B
+:103370007C20C0CEFF6112143FAE5A768E75ACD061
+:10338000712BDCC3AD32DCDB3DC6EF2D3C96C1FCBE
+:1033900021619F3FE2E52A13934FB2877D7F11F2AF
+:1033A0005E866BECA9D0A7BB3386A1DEE8B5ABA4E3
+:1033B0000DF54A35FF3E70EDA356764F47252E900A
+:1033C000C7E584CB1FC8337D6F85E589FB809D975A
+:1033D000914EB4731F9B03D59DD9F0FEB68DF1F8C5
+:1033E000BED91D00F9E576C0461507E88F6584CD86
+:1033F0006F55AB14086AE214E2F73808D8058DBEA1
+:10340000E96F0FF4766029B7774B8921DFA7556FF5
+:1034100097CA631CB8AE15AD3CEFB9775E32F98E32
+:10342000E2ACDA1B786916CE5B7207C2CC6319E98D
+:1034300009C27780573DCEEE0319E7655CC760E7A8
+:1034400059ED9E330DBE27DC3BAE61DE02DF042E5C
+:103450002869E820F05EED67F8AC6E97905EFFC5D6
+:10346000FD2A71CF4ED07D19299F057A6DD93D7403
+:103470005F98DDC707BDF67A6700FDA54F48ABD35F
+:103480004EF9BF76CBCE2B27C17B0FBF6E01FEAEB0
+:10349000880F8E30C5C14FD2DC7847E94561ECBB5F
+:1034A000C19E7F5FF8213CCE84EF517C2CDD2163EF
+:1034B0005E83A61D3FDFF7337EF613CC23AA795334
+:1034C0007637D1A735F0733E05E73E5F819FFFED6C
+:1034D000791BFD989CCC81FD18A37EE9E7C718EC09
+:1034E00027DC9B007BD993C4F2C0BF543CB1F1A848
+:1034F000970D7A37A900BF3B2AF46E35B77B629CE3
+:10350000A560EF68F9C32D4F3B21FEF05FF73C9DAE
+:103510008C7914605FF2FAECCBF5556CBCEB9F8DA7
+:10352000C2BCA5CFCA3AC781DF57F1F3979DDAEF46
+:103530009AAE48F59664827EE6F67095BC2DCB0572
+:10354000F6D0173EAFA2DFFE2BD23A1D6759A74334
+:10355000BFCEC5B04ECD7D902ABECE0F9AD9FA8E81
+:10356000B5B0F52EE9B74E3F9E835CFF0BABDB8F0A
+:103570007E4610EDF8899D3281FB67BD7E86C1EEE7
+:103580009F26AD5B011FABD6FCF57D85F2C5F291A0
+:10359000143F940F2AEEB2A29D5FFE5B76FEF9B156
+:1035A00054928207F02F049D6BE9F315D43F00FF7E
+:1035B000A26F1EBD767F39E0B1D7EE0F127F753C4A
+:1035C0000E55D7FE32FE5E94E461F99075E23B3011
+:1035D000BB0DDF81514107B07BF236A0530651D9B4
+:1035E0003E511F4FFDEF115F2C5C83FCDF3352FB1C
+:1035F000BDDEFAE8A019F27D7B764AE817ADBAAED7
+:10360000C4594220BF95C5C1366732FB25793C9825
+:10361000F762A5748DA6E3DD92A9B2E7AA8BE575E2
+:103620003F4CF0BB3362BEC6E7101FB781FDB39BB2
+:10363000D0FE19D7BF3B93F9CBAB6413FAD3B516C1
+:10364000E65777F3EF3EDCC7EBEFCB64FEF5C399AB
+:103650002C9EDF0D7E249C4F5F64C5DFEB21641A36
+:10366000C6C915C2F84F117873299FF7CA37FACB2C
+:103670003D1980A785A4D30CF49C553C47857B035A
+:10368000EF27DBF03B4AF4AF1CFA99CFFB396866B1
+:10369000F704DE8731E8BAE6F378F2FBF019503A26
+:1036A000FEFB6916F463FDCF59D14FB8399AC5FBBB
+:1036B0004862AC027C7E0DD7530B265B3D703E30DA
+:1036C0007FF2CDE500697F7E42F15561EBD9944FE1
+:1036D000C76934313BDF184FF0BE24D9D85508F8FC
+:1036E0003B9FBAC590274F57BFEBBB8481F8487FFB
+:1036F0004FA116E20A1710C660C5885F5DB9D6C231
+:10370000EA0F661E99754F06217F866C26B03380BE
+:1037100023E08BCA58DCE7CE863CFE78800AF2DBD9
+:10372000650AF19B186CB6E37788585EBF3807B915
+:10373000A2980463E9FA82FBF5F728AE0A9A82A3FD
+:10374000E07C47097600FE4C36D5ECA2E394974A1C
+:103750000580F7DA0D839BEFD1CC8F67DD33999627
+:10376000E17B5730CFB512E6F3CCA7420F7CBA50BD
+:10377000212FC8058C7EC087F5F1AA1FDBAD667CC2
+:103780002EEE6F08BAE4D3EEB5F89DCFE747FB699C
+:1037900076C2FB96F07193CF32C53E8FF9692BB993
+:1037A000DCAE147CF7B85E5E63B354F63D35F007CB
+:1037B00029DEE6731889EFED59AC7F7B16E3FB1029
+:1037C00097C7C18EB7CA4A82B8EEE7AC484731EE18
+:1037D0006C0EA3B358FEB29887E0DF6AD280F93747
+:1037E000D53C1E63A29A04F3745B7F81F9FDC63C4D
+:1037F00021EA2061DED98A1DC6E79A788EACD34BC8
+:1038000018E7942C3D4B607ED20FA2DCC0EFF32D65
+:103810006D180F30B633B74A28E7E666EA4F49FC21
+:103820007C8B96AD2D12FEBEC3FC8C9EB1F8BD7292
+:10383000EE575773BA52ED3D03EE0155833F85E7CE
+:103840005FFC3B515B981FA970FF77718BDECF98AF
+:10385000BF51E36732A0BB576F35E4879BB9BF7197
+:10386000C4D23316F4BDF19EFD11139BBF3F996086
+:103870007EA4B867AF707F52F0537A9659773E2690
+:10388000EE7356809E62DF3B30E453D9F1BB2B15BB
+:1038900012FF5E258F2B9EA4FE267E57E67014DA5B
+:1038A0002D1167EC2E71F84DB1F0394B565E107B3F
+:1038B000FD2CF0332B9C1605E01953178E7383DC17
+:1038C000E9C8CEEE8BE36E2E19BF05F286E66CCD0D
+:1038D0009D6DCBC4530E7E1F69EC6B90CF7BF93787
+:1038E00074FE581E37DB43F747DD2FF62CB4511515
+:1038F000BD2CEBFCD90AB5E7DDF7F66C85F2DAAC46
+:103900006256BEBD270BBE21BC76EB64566E14FD1D
+:103910004D9E0D79F0DD0FB0F295B4DE0F7E2EBF17
+:1039200007547181847A762DB73F227E54617A9E46
+:10393000C129EC773ECED66E4356F9DACC24F8DEB8
+:10394000E771FC3D8116D5B316ECF5FA0C6F6516E0
+:10395000ECA3E6487E0BDC8B7F333092DBAFB0BF4D
+:103960007BB13693E5096F1C5A8EEF0B7CD17E56E6
+:1039700064159E7B3FF1FDFBB9F69F99CF91A16C39
+:103980007D9A7ED6FD33FD4C51F5F311FE99F8CEAC
+:10399000DCBE6CCF16E877E54D6C3F4C8EDB75F7DF
+:1039A000FF4F353C3B12ECFEA9C7AD09C0872B9FEA
+:1039B000FC5D5635F87FDC1FFAA4E36D0BE47DD780
+:1039C00085D87771EA43EC3B3975BB3A2C33F2204A
+:1039D0008FB5C3325533BFDABEDFB9522ED3F831BB
+:1039E0003FCF12F9DAEC771D573EF937FC9EE04ADB
+:1039F00053DB8790E74B2E607134E33A37F1F7DE03
+:103A00008773FF30F1825F70FDFB558E673BAC73AF
+:103A10006316C1F67284EF767DCAFBAB88667ABC0A
+:103A2000AAC8615329BE0BDFF43641DE69F5C3D95C
+:103A300005329DC7F68C298F037F448E6FF6B0F850
+:103A4000663B8B6F56C4775E478D14F9686BC59DD6
+:103A500036BACFBBF47ED27BDF0FE286A556213F7C
+:103A6000D7CE9E96C1E265507E256BD59D203FFB4B
+:103A7000F8EFB32D9838361AE4BC2B3BC6E4A2F21B
+:103A8000FF747AE547308F05132F9A01CF4BAC8E28
+:103A900091952C3E8EFCF1747AF9F3500FED21EEE6
+:103AA000E1B50493AEA2EBF0BE2263DEB4775C8C8A
+:103AB00037DC3D9520B7571F65313F6D9F89CEB3E9
+:103AC000A06F1E627CEA985DD70971AB0D69F9E0C1
+:103AD00047BB324A3ECC4AEA1BDF95E17D03CA620E
+:103AE0007CBADC71F07CB0F3E8E4F4F810E846FB53
+:103AF000299F2CC397127AF5FA65D36274E5CB67D8
+:103B000026108F366E7A79BAAE3CAF2247D7FE9A2E
+:103B1000256374F565D6CE090DE7E0EFD73B1EC5EA
+:103B2000FCDEC3EDA7DF9A0F7EEC0ED92DD1F52C6C
+:103B30007FEE91B720FFFA24FC0449018B8BB1EF93
+:103B400035F2F318C5A3E8CE63F63F6D01BF5D13F0
+:103B5000E737DCCB3B80717CE3798CC817FF67CFFC
+:103B6000632C43F9BEB8F7F73C3F7D89AE8C4CDD42
+:103B7000DD81F469DACFF2989BA8DF02DF13FBE165
+:103B80002E6B00BEE1FED9EF8E5A54CDB94C7DA804
+:103B9000117F5777EAEEA3786EF3AB2CA6B7EBDA7A
+:103BA000BFB0C03DA91FB6AF46799E41F5572CE581
+:103BB0009BCE0E327617C493B31D9887B3B2F91219
+:103BC0008C53C786E623AC6DBD04FB5B159A8BE571
+:103BD0003AFE7BBEFBA23B67801DDEF74C1CEE0766
+:103BE0005F9383231F827EAC0ED40F65E90B368072
+:103BF0009FB02FDA9F772D1DAFEC3F7F8879E87556
+:103C0000BB248C9B96C9649F04F9F7A128ECAF4CA8
+:103C1000FEF384D5F4F9A553995D2D031F87D6CB08
+:103C2000458E5BF17BD2117E27AD6028D32BE62E2B
+:103C300036EFE9A139D89FA82F1E3A4CF7DD18734B
+:103C4000D20E65B1BD6F3DE62E09E18F426310D6FD
+:103C5000EF9AA340FEF92BB9BF48043CD1F6F87D9A
+:103C6000B0FEFA78622C09A3B704B4723D3C1FF48D
+:103C7000309CD3677B660D4D82DF23EC526CA047EE
+:103C8000ED3617F82FB38AF3D56ACDBAE4E7AFC69D
+:103C90007B10D6C41E33F803F329D4EAED4511ECAA
+:103CA000CCE5434DDC7F6EC4F50A7B448EFF18CF14
+:103CB000B517F2F88090A792A1261D5E3A25261727
+:103CC000FEDFB27381D26C6F35CCB7B384CC7B0A84
+:103CD000F5686716DC47FFBEE64FE96B03FA3B95D4
+:103CE0002E02718C95BDF367F27CB6F95FCDE7FFCC
+:103CF0009A4C7CC017AF5D7C71A787CEABE3C6F151
+:103D0000E3C12E88F1D60D65F987C4D5F30DE61B06
+:103D1000EE895121AE5F06671E13FAFC79C847840D
+:103D2000F861FD1EEB76F8406ABD93EEEFED90175B
+:103D3000181504BEEDF8639402F663EC70EFBAA1B7
+:103D4000982F386A1A7CC7C7D36E5508FA419E9FD0
+:103D5000C2F348F33D9BFE12F268E4336F33933FA6
+:103D60002F97C34ACEB78BB91C562AEE58388F59B5
+:103D70007440C67B918BD7496377417C4075E03DA9
+:103D80007D218742DECCC097E3813F195FD686E272
+:103D9000B87C67F37E991C94C92CDFAE6C4C1CEE8A
+:103DA0009FEB4209D84EC8AB90D3CDD9DEC761DDB9
+:103DB000654D54BEE938DE0D6913405EFAF8C4E281
+:103DC000027EA27C925AADE183A68EAF14E013F37B
+:103DD0006409F9C44AE1540D1F95F7FA27AE19C9D1
+:103DE000741EB33666E3F79445FDCEA1C24F191C8D
+:103DF000BF6FE5FCB5D81E1C017EADB921CA0DDF31
+:103E0000913F99A8A21E5B738B843F4EB8C65C3E5F
+:103E100015FC8B350F4818DF03BF03F44FD1A10603
+:103E20008BF61CE4EAD0383CAF9E1B1A8E707B8662
+:103E3000F78F8087CAD0951C8FE3C29EF77DD9701B
+:103E400033C6D5BE0C58DDEC3B63FAF85DA1C78DD7
+:103E5000E77FE60366B24D85B89B57C6F3BD4CE2DB
+:103E6000BA5B62F13B88E789F89B38A71371382B5E
+:103E70007C0F5763474F2BAD59B00FE9178F2B615C
+:103E800076FFD31D66766FABE3CF45265AFF71B63A
+:103E900007E3722FA57ADF86F5ACB82CF0A49996CB
+:103EA00057DEFEB413E2E5029F6D4A7004EC97DA28
+:103EB000281E213ED8D622970698BF133347935F1A
+:103EC0001189AF578472103FC2DE08FDFDECFA5431
+:103ED000DC940A3D7E363B24F87B159783552007FA
+:103EE000446B6FE694C3EF9A915C09EFB9F6D91B66
+:103EF000260F424F537E47B929CBC9C4B8BAD0DB8D
+:103F0000467BB4576EBBFB02B0BBAA3746A5EB9B02
+:103F1000F29BBF3FFD0EADAA7DEAB16940A7923189
+:103F20001281734CA39EFC1F2B97089D00800000FC
+:103F3000000000001F8B080000000000000BB55BB4
+:103F40000B7854D5B55E67CE9C9949322F9210C23A
+:103F500023F1CCE441A8018747243CFC3C10082015
+:103F60000627F8155153994404C4BC40B9A642BF72
+:103F700039210902A53654ABD4A29D50B0D4AA8DE4
+:103F80008035AD3C06411A8AD569B5B7F416E828E4
+:103F90005CDE60C05AF116E5AEB5F7399939930485
+:103FA000B5FD3A7E7E9B75F6DA7BAFBDD6BFD65E99
+:103FB0006B9F9359C523E5058500D7E8772B80F8DB
+:103FC000E667923C1CC0BAA21C143BC0BDD896D870
+:103FD00063FD1280D28E3440D43CDB117BEE964DD3
+:103FE00000FDE979234011C02C9DEFC432800C8084
+:103FF000FBDCC07F0DC83410E08B1B38FF742BCC6A
+:10400000F3E3FA608E64C7CF37DD33D92B63FF50FB
+:1040100059E0F3AD889A6DE9C867B7B9B77890FEF3
+:1040200017E52E13C126A40238CD51482DA4F94D11
+:104030006C7E0095C9F36572F7D7F6F9AE080DED01
+:1040400038FEDD5B6F8D2828D7DEE5A3478B726CC9
+:10405000BDF1B285F195A5E1D831005DBBACA14DB4
+:104060002837E07C02F27FB46B58682D6EED18742F
+:104070005D05A4D59D2932EDAB6E770AE3AF4B7693
+:104080008504ECAF7376E5FB519E923D4961188142
+:10409000EBEC493203AEFB59CEFDE3E5227A3E74E8
+:1040A0008AE044A1775ACD807C2BB39509A4B7BE92
+:1040B000E4D7E54B6CF5FD97960BAACB0530B3C45E
+:1040C000A19AB05D7C25076034C043AB67B0F6F5BC
+:1040D00060262A1960EA957200DC5BCD953BD9F326
+:1040E000DA2B298C9EF9DD4829ED075E17600BCA93
+:1040F0005F36F85B2B01E5EB4C86E13B705F9DDEA4
+:104100002C5F137657B7CE60FC65BF9C369DF65585
+:10411000BB0399695C8110CA233D9DB09B48FE8713
+:104120006D5CFC8FEBFF3C46C6F11F8F718C046405
+:10413000DD27B63F395E60F6EC247B4EFEC53FB707
+:10414000FF0FF249574450501EEB1581B57F940381
+:10415000D5A427E40340BEEA6D03C704EC5F054F16
+:10416000BF9664C4A3547D49223C59B12D89EB9F6D
+:10417000A7E124518F4BBAF1F4D5FC609EC6FF65D0
+:10418000786AFECFE3A9B90F3CB5FC3B78BA8E1D27
+:104190007DE089E16CE6218E0FC871F8B600C30B93
+:1041A00093BBD392156A42BE7BC9AE84AF6B504FAE
+:1041B000FA9C47F64D8BE1F5979EC0CF494EDDCE78
+:1041C0009DC96AE192C2AF62E7BB81E2C6BDE9F573
+:1041D000A0E0F379D8C6C70D2BD9AFB0E7FE5EF9E2
+:1041E0009AF16EE357B4F31EB233E1C78D761CC368
+:1041F000EC27935D13ED4E7625BBD7EDB66EBA9ED8
+:104200005D87E7067E477A49B42BB8934D7073BC3F
+:104210005DAC77126E3E0E9B81FCAB2FBB4A1BB888
+:10422000DE75BA256C9E1E62E701A4950F6778398A
+:10423000F4EFE0A5ACA4FDEFB67E0067E4257E3385
+:10424000F2CF29C6AE41D4BFB45531537CC17F8E65
+:1042500067332A6063FAD4E8872353508E994F76E8
+:10426000F7ABD43F75A24B1B0F0A6EAB9BFFB45C40
+:104270001F59C7E46EE5FA0E44CDFEE171F418A4AF
+:104280001D71747102BD91F3D339E266F384D87362
+:10429000C29F308A687D3ECD0FA0ABB41FDA6FD6C7
+:1042A0000EC1BD16ED7DCFC48F2C649FB292E88104
+:1042B000C1B8DFABF2637E7B123EA73888F2DA3DED
+:1042C0002B5B55B3361EF558ADA9D1DA2E2822DA6C
+:1042D000A9BA5808793D3DF568F7E8B8D4D7C5A321
+:1042E000D5381E2C63BEDE78C2091BEF65E3C3D64A
+:1042F000AFB1FE5D134109F512270779B43879157E
+:10430000697D7ED4DD9DB8BF502FFEE6D5E68D9841
+:104310004C3580FAFA86E7E9565B16DA17383E0A1A
+:104320003D3FF4AB1C87A024ECF77AF2BA3DC6F30C
+:104330009F7EB2717CF87AFACAE8315EC3C7222345
+:104340005E5C66FFFE8F510E57BAE056D1FEB5FE99
+:10435000A475E022FBEBF80EF99521B8BF24E8C65E
+:10436000AB11DF6DFE29A8975AD0FB7FDA4AF1CA5C
+:104370006FEAE6E778DF29748F2F40FCB8808F2F33
+:10438000F56C6A550B993D583FA3CDD7C17B7B0295
+:104390003D31C13F347C33FFA4B88DFAC9EB256EA3
+:1043A000DCAFD9ED82007329EE4526F37C2FE2E5E0
+:1043B0006D9387E7770F697A7C586B23C9717A18F8
+:1043C00012B333FEC25060D837D3D3DDE9DABED59D
+:1043D000BDFEDB715F9154182E204EBED3B6ABB537
+:1043E000F996D8F860DB5E8693EEF9D43D113ADF9A
+:1043F000EFD6F4D4D4168E683812C8EF6A1820109D
+:10440000073B0455C47DD6100E7AD967594FBF516A
+:1044100013C62BD275C6DFD973BC92301EA4F4AF7D
+:10442000335EB3D3ED09769C9E60C7290974854E2F
+:10443000870CF14C8F73551DEB5B32508E87B60A9B
+:10444000744C50BCB608230136780EF9EDE308AF82
+:10445000B2341863FE46CFEF23B66100E514CF18DF
+:104460007EDF695572514EF27746BFEB576E22FCE4
+:10447000D4B76422FF264FA4D586ACF734AF972873
+:10448000A779C1F3C75633CE7BF7985F1EA0F9CC4E
+:10449000C2FB91DB3DD7C16B6BC23E3626D06A02B0
+:1044A000FF535F12DF9B13C6AF48E85F97406F482A
+:1044B000A0571BC757CE17989F54A2FD48715FE6BF
+:1044C000373B3DDDF942F77926D8599E64C0FDCCD3
+:1044D000264E1FF07CE85F6D8FA3DB8EFBC9DF7576
+:1044E0001C4BC07FF7A6834AE787D4473CDBD11734
+:1044F0008E0A12CF3BDEFF37FAE740CA3BC1702E6F
+:10450000EF138DF45E51F7B74B91470AE9A14E774F
+:10451000F90348CF7CC6B82FAC0BB5FE8BFE29E85B
+:10452000FF33BFAFF75FF453DCD3F7A9F3977E7E79
+:104530004DA4F58EB45DF06FC6FE8AC9E1BC7A94D5
+:10454000B32295B778CE88748ED5D9B83F95EE1240
+:10455000FD74CE542487F39616C6ED13DAF3699FE3
+:104560007B978BCC3E6A13AF47AAC067012C85F6B8
+:10457000BA5C0D2F20FFBEE562039D6BC71AD232D5
+:10458000A89E18EEE579DB3ED70D190F20BD3765E3
+:104590009E4546BEBD8F4F65ED9BA2B2AA0B71FC36
+:1045A0007F9ECFFDF661D4EF62FAF947DB157F23DA
+:1045B000FAC5671E99E93390EACEE8A07C75AD0490
+:1045C0005B6492C7F73CC3CDF7AC23D7A21C958D93
+:1045D000376650FE56F5C3F2D281C857D522F9048A
+:1045E000C6072348EEC0DAA916EA9FDFACB5EA3465
+:1045F000D6EEF962FBA111C8DFB546F46D42E6DDE7
+:1046000057BCCE2A94EB78128FC31F9ECF75929C15
+:10461000EBBD01C98B72543A1DC9021D1E6ED939FA
+:104620001BE77D2247B1788B62FC7BBE10E751BE51
+:10463000F9C6F9AA0CB29FDBCBF1BAFB4A55465535
+:10464000DC79BFE08299E9798F457E84F2CB3DC960
+:1046500059822A303DA795A3BFCCD7F26BC44BC378
+:10466000F65ECEFDCF3D22D3CB096B031C4710EF86
+:10467000FD6EFF8924A73EAEE8FD409383F03C44E5
+:104680001E159F47F7CB9E3C84F611C359DA1F08CD
+:10469000372C8F467AA8D7BD5E455CC13ECCFF491A
+:1046A0008E74A594CE0158810C18C720B33D3FFEEF
+:1046B0003E2296A7AED4E201E73BAA3A58DD7AF44F
+:1046C000A5A410D53347D5BF3AC01ECFCFFD64A1F6
+:1046D000D3A1D2617CCAE130935E8F998327BF8DCD
+:1046E000E3163C27B138BAE0B9FE2BBA281EA03D2C
+:1046F000F3A0E7BAAA5762F3F4E927E02937F8896B
+:104700002A972BF6BEFD6492572EBF9E9F2CD4F2A3
+:10471000F6D2E7243FE17C6191C30C18AF273FF745
+:10472000D616C2E3C22549A3AC28F8C2E7ACCCBE7A
+:1047300051874375637FC0E930F7A3B8EEE5712474
+:10474000DA98C4EA1431C3C2E29EB8AA4826FD949E
+:104750008860B6E1B9223A7DB29FD3CD6EACDB5A08
+:104760001CC532D9F73B5EEE0FDDFDAEB9B7095877
+:10477000D75CC67DA4E1B8330D4F3E3D16E53B0B3B
+:10478000A1396351EF97C9D0B8CEE51D6248A57332
+:10479000C2AC98CB30EE2D02EEEF3507B75B26E1C9
+:1047A0003F17D52FBC9DEAA30743D28751ADF6B979
+:1047B00086FF7F026F5B28BF7D68ABF1397A8C85FD
+:1047C000FCAAA6DDF8BC0ED65D1247506BFE305A2F
+:1047D000A03DC7751B8EFC65F8FE38BE5AAF23FDA1
+:1047E0002496E0300A46A166719D42D75D04BB065F
+:1047F00091C92BAE4C0A911EC56C7E3E4C03219490
+:10480000448070E3BE71DD4F838787EF4740888F18
+:104810008D667A3911443C0D457D386D8C5F7C4C3A
+:104820000C5971DD923450FA913E9F2E0770307D05
+:10483000AA6EA4A7A5D79B293E9DD3E24BA500FE57
+:1048400076E6F7BE6CAA8F173C97C4ECB7F0F90771
+:10485000FFFB4763C85E65E9F17EB446C31DCE0722
+:10486000B6D4D83CA71ABF934DF294FC04EB4AAAE5
+:1048700037C5C0D377B37899E26371CB1DFDDE589D
+:10488000C24963CAC8B540381998ED2D8C8D5FB800
+:1048900072793E1F8FF5AA93E25512DB4FF50E2B6E
+:1048A000C349E51A5161E76396859D8F1F3627310D
+:1048B000BA7A4831F3B34A1304681F980B66B2B84A
+:1048C000CE550ED57650B6DB29CEAF8B884E661FFF
+:1048D00055B39B85ECB3D99BC6FC771EE918CFADC9
+:1048E000FD84B322361FBF7FDA2D84B6B0F8542F73
+:1048F00093FF57980416E712FDF1352FCF5B2BB3CA
+:104900007DF7D1B89A27ACBE951E2E83A8CB8378AD
+:10491000AA314516FC98E6FD9595DD6BD4E13E92F3
+:104920009CACBE50B6A1FC7566305BE85E4AE6F111
+:104930004C97A74E2E9F4638C5FEC366ECAF71F06C
+:10494000785CD38FDFF780C316DA12BF1EC99CC311
+:10495000C7C94EF2B3710C2FE4F726ECFF08787F3D
+:1049600089B3588EE2F34E13ACA67B129267D888B7
+:10497000B875911E3882F0B8C4EC75901DD2E6CCA3
+:10498000A5F55E16595C42677AA298F2BF97C5D129
+:1049900054C756AED957BA81E85747BA4984CA575F
+:1049A000DE63E7D3431ACEA294F7D37985F4ABD86C
+:1049B0001ED5E24240E4F73847498FFD637AD5FBC4
+:1049C0006BD648CC1E352D1C0F358D7F66F3D6383F
+:1049D0002219648F9AD7A49B09D72735B9AB1AB38C
+:1049E000261E467C54492EB7808FAAD5320BD1D5CE
+:1049F000AD02A3F5F56AD6FC29C354C8E7A3D6AA2D
+:104A0000E128366FFF6C3ACFCEBD94965D1967F7FB
+:104A100073CDAF3B653BF94D38CF4DF7304B927CB2
+:104A20009B989F727B9C6BCEDB44F734F3DD118740
+:104A300080FDF31FC949A573EE983B6CA1FE63EDA1
+:104A40001E13D18ADB3D9168C57C13A3CF61086F2B
+:104A50002FD4C08B76AA15386EAA5FDA67F1E27A96
+:104A600029395C3F175E7E2F9FEE0B6AB223F974E3
+:104A7000FE22AEF207935D5E14589E50FB92A8246E
+:104A80008D88E1AA967085FEBF58C355ED8ED71F5D
+:104A9000253FAD253C8DEA894BAC2BF7B3E7DBDA3C
+:104AA0004A818FDF4FB8D3CF7BA49B25BA57B36819
+:104AB00034AE43B43D87EB1FFBA7F07EB5909D233A
+:104AC00010B5503E5C27F23C01FD2993F288BA0EE6
+:104AD00049ED8E97B42EF517C6FAFBC2CDF01C93A4
+:104AE00066672B3B8F86E770FF8BAE79CD49B8B8F0
+:104AF000F0F2BE03E3A9BEDA26B829DEF7F0434D93
+:104B00006F75A42727DB27CB8BEA482FCE989EBA58
+:104B1000FD4DC3451D703DE87AA9336B7AD2FBB5D4
+:104B2000F123343D5483A6D71D43B9BF6BFEAD9F1F
+:104B300023FAFE02A97CBC8EAF79DAFE266A6D35B7
+:104B4000E2C657C8F0A5586ED6EA7EECBAF06A1BEA
+:104B5000BB37D2EDA9CBFDA8B63EC669A55F6ACC2E
+:104B6000CE51132CEAED9E7AB6862BC9CEE3CA0746
+:104B70008D83EF6B40FD2D7E49F431E551CD15B7A6
+:104B8000AED51475B0BCF431D14DFB2AF945F96DA1
+:104B9000B46F1D77D256C1DC3186EA8C7E4CFFBAE9
+:104BA0007C2503FCB7F5E3B80B933CBA9C1F086166
+:104BB000662FF555C1CDF3DCA885EE0F753F4D94FA
+:104BC000779E666FD1298C176E22797C32F937E097
+:104BD00039C8E4B11F5ECED6538F2EF78C88AD73E3
+:104BE0004C759889EF18F038A0E3F203ED3EE283AC
+:104BF00096D7591EACAFB34CD34BDC3A8186F49EAA
+:104C0000EBE8FC351ABFEE179DA91CFF25CD7F668A
+:104C10007C7A9CA51FDDC3E9FAD4F516E79706FD5B
+:104C2000E8FEA5FB936ED77FD5AF60457F96AF3E7C
+:104C3000AEED9BF94846EC5C207CD27967B5202E1E
+:104C4000ED867393E535D3865CB2047A79AEEB29B1
+:104C5000F179AC9E726793FEA7D9334D94074073E8
+:104C6000E6FEDCB8BCEC38DD77513CED0FFC7D0690
+:104C70008694F8F35CCFD7F4F31A7FEBBA7189E32B
+:104C8000EBD29533D4BF68CC927CCA232EE578D979
+:104C9000BA67A1DD3209E7AB3E1D2975CAB17AE5D5
+:104CA00096BF874517DD07EEF018EA85EAF3FB9912
+:104CB0007FD7406415D5B7956BDE2B1B4B76FF393C
+:104CC000E6E3C837BFD5C3CEBD339BEF1F4DA56C00
+:104CD000654B1EA31FDCF200A7D7F07CAEB2A5E89F
+:104CE00005BA8F3F9EA49412BEBBD60B6EAAB72600
+:104CF0006C295A710FF64F70DCD08FE43EBAF97808
+:104D0000D978AA1B1A44E62FCAE627E750BFD2215A
+:104D1000FA68ABF3C1BDE21EC2B7D9C5FCED987607
+:104D20004E34491C676F6B71627F0E3F2FF76B38F3
+:104D30002C696ACA37D1BA6D783EE1FE2B2C727BA2
+:104D400098EABE5D037C9B485F58A666228E4E0B98
+:104D50003CFF5E64011BE1EAA0145946F21F5CE6C9
+:104D600018D9480288576FAEE2753A8B2F5837B181
+:104D700075757DE9EB1FD2D6D5E7D1C775523E4593
+:104D8000E78726EF99E69FCFA13CE1CCD6BC5488BB
+:104D9000D3FB19DA17EAFB418C8BDB7AA9FF0EE70C
+:104DA000E8F7AB21D62ED2EE0D0F4AAD43E8FD2D2C
+:104DB000E6F127E2F3F2536D4936C223E6F1C6E786
+:104DC000123F4F308F373C47BF3961CCF7B5FA4EB1
+:104DD000AC70057A89437A9B98E79FCBB1A79FBCBB
+:104DE000117AE4F9BADF258ED7F3FAEE7B9623F633
+:104DF00084F731635D709DF5CF07D13058FBFD948A
+:104E00007C17C74F49F97C7B84EAC956ABDB8AFA29
+:104E10003D417E45EF015F13799E68035F18717114
+:104E2000E24FA37DE4870B8E70BF5BD02E84E81524
+:104E3000FBFEF58F8BC4FFC0460106087175D65383
+:104E4000EBE790DB5DF605560D44FECB5B059FCA94
+:104E50002454EC09F5D5818172DFF5D5BF5B57E9A4
+:104E6000F74C897A1F94ABD5573EF019F5CEEBF38A
+:104E70003D089FE2513DF57E3E186075D4C5E022A5
+:104E8000D68E6B6F2B198CF27F247CF0C404F21F3A
+:104E9000878BDD939C0FD6B39780173B465F9D852C
+:104EA000FA79C3EE7253DCB8186C60CFBBF1A2E1A3
+:104EB000F3961D7BC5C1C0F8774E40FEDD7617BD69
+:104EC000D6E8E57D1BB72F40327F3FAAD5DB0F2FF9
+:104ED000193B809EEBFB3DFB6D6E675DFEB35BEFA8
+:104EE00077527EBAF7C7693BC7917D535C6E82D11A
+:104EF000C20D220446633EBC81C7A1D336D70B74D2
+:104F00005F7A7AE39D19540F3E2075597C38AF6F54
+:104F100057B993EE41FED71C75BAA945FE30C96159
+:104F20000E8914FFC64F07F61E707CD80CB287BDE1
+:104F3000A267381977DE1C0A237D8EDE0FD2B97D79
+:104F40003599BFA7D7DEFB3DF06B7E9FD67D7FA254
+:104F5000DD234CD0F6FB5FB9A91CE7DAF39262FEC1
+:104F6000FCD4C6EDB368BE339B2537C97B71B3C48F
+:104F7000E65F8C75BC0971781AF146F16BF1FBA202
+:104F80008F207D662BAF9317236EE9BEB86689A488
+:104F9000585C3DF158A2F3ED14587DADE372B112A7
+:104FA0002A657AD7F069C3FFAEE191D10FDA579144
+:104FB0003E1271FAAFD6FD35B9BDD7FD8938D0F5AF
+:104FC000A5E321864F60B8D4ED9EDA3E72D26036FA
+:104FD00040657A54274301E5054D162830130E4CE1
+:104FE000C93EF2F3069B7304DD337D9AC4DB474D63
+:104FF000EEB7A85EFED4244B02B6D15C0F1BFFA80F
+:10500000E89B4AB4941E65F70362894931D179D788
+:105010006465F12231DEACC9E571382B8FC79B2D59
+:10502000B96E9E3F423DCB1FF416379845F949793A
+:105030004AEA2732B23CBD79C66C33EEAF7C42EA15
+:10504000B21CCC2C9FDF7CC76C7AAF5B3E3AF53547
+:105050002FD2A1DC59BCFFA6D42209E9C646FFEC39
+:1050600029D8BF2B57792AB728B68E3E2F3E7F8688
+:105070009EFF7640E0D9DCFE749ED95753BCFF48B2
+:10508000E8AA358931FE3F0870EC0D21464725C856
+:10509000A67C7A4B2EB07DF4D59EC9557E9ADBCB8B
+:1050A000F32A8016D26395FADBC394AFE1CF6F4346
+:1050B000BCDDA1E1ADCA660F132E60B574BE1B172F
+:1050C0005E8A4B2E33F9F72CCDDC7798C37B69FCD5
+:1050D0003068769FB4B15470E3B5B4BEE33C3A2671
+:1050E0009CD4E7C3FD7D24E17ED1AE8282B6469793
+:1050F0001250C91518DF849DBFFD8CE66D52219AB0
+:10510000C4EC50E1A6F3488080E91AB63529880737
+:10511000D4D3D2D72EEC27F83FA8E75399FCFB8CC9
+:10512000651A1EEF8828CFB4A150A782909E8BB637
+:10513000BE006F5E34E3BA674C8183A4976AD3DB09
+:10514000D94B65F2DB2627E52F175E117DB7E3B853
+:105150006A2D6F87AB62F8567CDEE919B6696D1C63
+:105160008EFE98CBF394F39E70F6728A1F1E5E77C4
+:10517000C2D57DD9CB917FBA7746119D4B4F81F235
+:105180007E6EDCFBC559E6DEBFBFF8FD209E77C012
+:10519000667EBE5ACDA03A52590B4ED4C70C94A588
+:1051A0001869096991BD8F0F313B129F93F214F971
+:1051B000FE4CFEBE06FCE48FBA1D75FBF4B01B8AE4
+:1051C0004CF9B9C90612F9CB30D8E826FFD6ED372D
+:1051D00055B4B378B3F4357E1FB7548836A711FDA4
+:1051E000329E97A42FCD2F7B9E9B5B2C648A451B00
+:1051F000EF67F1498F4B32FE47F8F94FDD4B0A79E3
+:105200000E9EAF8C849184AB2FCB77F4B884F6B12B
+:10521000E57D1DFB908A70BF0BB5B5A78A15B299C5
+:10522000F4D2DFE6A3B8BCF4B91C76DEC1BA1FB075
+:10523000FB0F9D0F36A6317CAEF288CC8E651D83A8
+:1052400041C6470F760820E339777B471AA39D575D
+:105250000632BAEC67032653FEDFFDDEF267431920
+:105260007DE685436302FC7EC54672F84197A3B094
+:105270009DF2A1CB769403EDE0B7AF66F7857EE8AB
+:10528000AE63846B02D18812F2274552B95D6C8DF2
+:10529000CCAFB57D2D75733B2E3DC8CFDDA593F802
+:1052A000FB3DB33ACC4578903A450821FDCD836269
+:1052B0005118599BB4B86CCD34811C678F243919AF
+:1052C000E4B8FA0D54254275D25C0D272905A9864C
+:1052D000FEC785804472CDB52F60B871F80619E617
+:1052E0008B649776327D04787EABE309C4F36692D3
+:1052F000F3938902A4212EBE3917FBE3E695265EBF
+:105300009A22B0D69817A35E4E5C0F4F33F3B4F3D6
+:105310006E180C63784AD00FFA07CB3F2FE3394E53
+:1053200069136617CF4C447A4EA7042199E59BCCAC
+:105330007F2E2B29ECFEBE45D3938E3BFF50702869
+:1053400038AFABD8A8B77E8A516F69D38D7AEAEFB0
+:1053500037EA65C05CAFA17F60E01B86FEC18B466B
+:1053600019E8ACFAF106FE1B1A261B688F7A9B819E
+:105370003F67F56C039DD77A8F817FE8862A43FFCC
+:10538000B0D06243FF8D5B971AE8E1ED8F19F86F9B
+:10539000EA5869E81F195E6BE81FDDF903035D1425
+:1053A00079D6C03FF6F02643FFB8E88B86FE09A702
+:1053B000B719E85BBA7E63E0BFF5CA9B067A121C98
+:1053C00032F097D8DE33D053DD7F35F04FCB3C6ED3
+:1053D000E89F219F33F4CF2CF8D84097F9FE69E07D
+:1053E000DF3828F02CC59FB9A6754755A0F82C7F4B
+:1053F0007F22E2F9AE74B32F4C4C5FB36EDBA4C7CF
+:10540000410DB79F80FD3E93F7CBE3E0E35A5E305A
+:1054100055BC1DE8BEF772BBC070DDD7F9ECC27C8D
+:10542000D71CB78F7E8A0D0BF0189D36DD6DA0FB63
+:10543000FB330DFC03E6CA86FE81810243FFE04593
+:105440003E039D555F6CE0BFA14131D01E75BA810E
+:105450003F67B5DF40E7B5CE35F00FDD1030F40F14
+:105460000B2D32F4DFB8B5DE400F6F6F30F0DFD4B4
+:10547000A11AFA4786571BFA4777B61AE8A2C80658
+:1054800003FFD8C32143FFB8E85643FF84D3ED069A
+:10549000FA96AE0E03FFAD57C2067A121C34F0978F
+:1054A000D8FE60A0A7BAFF62E09F96F981A17F862F
+:1054B0007CC6D05F7D0EE147F9F31B027BFF35B35D
+:1054C000E092A15F4AC73C9DEEA721D9270A3DF390
+:1054D000743D7F2BF37D6658E751533DFB2EEE5311
+:1054E00013CFEB6CF9FC7E0BF3779B8DC5593CA178
+:1054F00086B3AB9646CA4F5DAAC07047A94605BBA6
+:105500002F4C67E72A3B1A65FA0E0DF31B24524D08
+:105510001E0FD50F29B13C74C8B5D15F3D0FCDC862
+:10552000078EFFFC404A7E11D563AF96527DF22074
+:10553000A8AB480E3C5F5DF49EE99D24E3BD91DE7F
+:10554000CEB0A1FEE2D63B98D43A64D475FC768600
+:10555000ED3CE3EF9E57BB5712707F4BE3E67F02B3
+:10556000EB26339690AD41F42FF4D31F04DD8C7EEF
+:105570002A98C9E8A783326B37040B58FB6CD0C755
+:10558000FA37068B19FD7C50617428389DB59B82D3
+:105590007EF67C73702EA35F080658BB35B888B5BD
+:1055A0002F06EB59FF4BC10646BF125459DB1E5C58
+:1055B000CD9E6F0BB6327A477003A37F150CB1B640
+:1055C00023B895B5BF09B6B3FE9DC10E46EF0E8652
+:1055D000191D0E7632FACD6084D1FB8387197D20A8
+:1055E00018656D67F0346B7F17EC62FD6F07AF30A5
+:1055F000FABC76DF5F926F7CAFA6D30053181EF41F
+:10560000BC7616D52D048E62E9A2A16E49A81F12A0
+:10561000ED71565B479A8CC736E53983F23735C54D
+:10562000E5FB7768EB3D9E0C6A12C6BF462AE61181
+:105630008A8DA9106A62EF5779DEBD50C325A4F3A5
+:105640007C7B8126D742CD1F8A089F050C9F6F7FE8
+:105650009D3A49AF93834302F3F2B15D9C6552D901
+:105660003D813D944F79FFA621812AC2EDE5FA07DD
+:105670000EB0F5DCBE7C5AA4CC1AEE7F17DDFF1C01
+:1056800014D97D695FEBD5697FBFD067FFEE3343E7
+:10569000E81C9AFE85C8EED3DF911C73E97EE49185
+:1056A0007CFE1EE3917C93A11D96E57F98E43C95DA
+:1056B00057FFC2C3C852B124CF4579EB1D545AA33A
+:1056C000DF97832CB1EF6341798B3E99FC262676D8
+:1056D00044DF052A6BB70F0EACA0F177630141746C
+:1056E00060BC35BBB7FD24CAB34AB3D3AA7C93A12F
+:1056F0002DCDF2B7D07C27F214833CCBB364EDEF11
+:1057000064BA9E27B9FEB1EBD2492127A66FFD5E90
+:1057100062D524EDFBA92582FE9E9AE78336D0F35D
+:1057200041D65FB18CDFCF7C0BEB327A5F79448B53
+:105730008797EB25162F2B84641FE5D397EB970DE6
+:10574000A5FD24C6CD0A1C67C27115C0BF87A83845
+:1057500092C2F085F301BD77ABC0CC9DEABFDA2CD5
+:10576000FDDE236AEFCFE551E83DECBC9DD636AABD
+:105770005311279B591C1B27AA16AC93DF3185F2C6
+:105780000591E1C322A0BC0BD3111FBDE4053A0E65
+:105790006AB5BF8FD19F23BE5EA1F92EFE7A6C0140
+:1057A0007B6FB27B9C4CFA6B32A13DE8BEE6772260
+:1057B000FF4E82AED8E93B0E57611BFBCE9F92088D
+:1057C000B2D738077B1FB2578486577B899FEF6A11
+:1057D000387A27539A1E62F31ADFF3756A76ECD48F
+:1057E000EC5BF6E6C1AC4771DEDA4E89D53B30267C
+:1057F0005AE8EFE5FBA6BA86430373E3F651D7F107
+:1058000001FF2E0AA285F1DF439DD2D6D7F1245A9B
+:105810001C81367BBC7CDDB87E47C3F549CAEB678B
+:105820005965D75D38348AAA09631BF8899B7D576F
+:10583000A77F5F371FFCAC5D8870201CFBD5F5ACE3
+:10584000FE5D0CEDEC796DF1FDD944D741D7944C58
+:10585000AA5F5637BE9589D2DDD9BA7E2ADD3FCF01
+:105860000E55BE456DF966E124D5DDE8177FA3F539
+:10587000A3427D0B95A4F7BC34A985EE796789DC3A
+:105880000E7088DB0171A488A93DF7877E7052F302
+:105890000326BFEE07152B397EF4BFC7E8F68BE26F
+:1058A00087FE3698DE7D98BBD8772175BBADA9847D
+:1058B000AFC554798AF179A17E3EF3BCE021CC0BCF
+:1058C00088EFACC4ED7FF66812FBBB97B302E263CE
+:1058D000544FDCEB79E6A7267EEFF6A8885B14A987
+:1058E0005E7E92E969912D3482F484E7330C255C65
+:1058F0001F6F5F3592EEFB2687B2295F955EB4FA83
+:105900009A3C86380FD75262F7784F48FC5E2D518B
+:10591000DE1E794BF181CF289FB05A40A5F749E8A8
+:10592000FFDCEF8F71F93F3505326F1679BEC2EAA1
+:10593000E8217E56FF4386CDB756E8B97EB3B66EF2
+:10594000E7E7BC9E56B3807D8F932887E0E6EB2681
+:10595000CA634DE672E8E74E4F79B81D74790A863E
+:105960007AF8FD7DB6C2F6DD68EAC7E2D747626025
+:10597000E8503A2FB5FB31BD8EEDF49C62711DAE3F
+:10598000360DE1DFF786FB3A4FCF77D7CFDED879F8
+:10599000A7DF33C1C4DEEF05FD36B744769B0D3E6D
+:1059A00016F787C1115D3FEC9EE9FF019ECDEE1811
+:1059B000B0390000000000000000000000000000FE
+:1059C0001F8B080000000000000B7BC4CEC0F0A3BA
+:1059D0001E822538106C62711D0B03C30756D2F569
+:1059E000C17025507F0910E703711610A7027102DC
+:1059F000104703711810BF069AFD0C881F02F11D95
+:105A000020BE0EC49780F82C109F40B277191B035C
+:105A1000C35A36D2EDFF83E4E78940763910CF24AC
+:105A2000231C46F1F0C0F23C0C0CDABC08FE3E5ED2
+:105A30005479051E047BB92065766D03EA0700E9F9
+:105A4000CD424A800300000000000000000000007A
+:105A50001F8B080000000000000BD57D0B7854D58B
+:105A6000B5F03E8F79253393C9839040C493970452
+:105A700009382421F2AA1E0842A4D406F42A5AAEF8
+:105A80000EC823869044B02DB7729B21092F411B6D
+:105A9000152D5AB483458B0A36F268D106EEF028EC
+:105AA000C65BB4D1A282D536D45B450B4944116F95
+:105AB000B5BF77ADB5F7C9CC393349406BFF7BC370
+:105AC000C7B7B3CFD967EFB5D75E6BEDF5DA3B76E5
+:105AD000D9C6E42B19FB027FA09CA330C60644CA9A
+:105AE00051775EBB687B09FCFE99DDFFB8166967DC
+:105AF00094173389B1D1F09E653056CAD8954EF8C7
+:105B000015DA95BD70EA0F97A531B69F29CC018FA4
+:105B1000C26A59EAB7A09FFD9F333FBE975F706787
+:105B200075B8F1BB2063E98C5DC1F877E16C2DCBD2
+:105B300057881526E373DD49BF433FB99BEAE0FB75
+:105B4000B39FBAE97B2B1C46C93E9759587CF34555
+:105B50000EF6AB7EDC5120EAD90C066702DE2C1A69
+:105B6000D780F7D0DBEF11BC075480578B33BE13BF
+:105B7000E04F8BC0BF9F5D9BC40A39FC7A6904FE6D
+:105B80000B8587E60F786EACD7BE9997CFD8BA7AD7
+:105B900046E5DA7A2795ABEB7DDFCCB331B6B23E82
+:105BA00083CA46153E01381AB7B0501050EF2E8404
+:105BB000F646FFF03F21CF69AA3BB37CA6BA3D0D64
+:105BC000FA2988D455B766AA37BA2739036E1C1F3D
+:105BD000E6EEC0F19D5402984733001F978A79BAC8
+:105BE000B4E02C06EB91E7B66B2180E352F782E933
+:105BF0006C24B6CB27BCD9055E9764367420BC1FD5
+:105C0000433B06F31DE69EF23EF332F69FD94FF07A
+:105C1000796C606C203C5FFDEF751D12F4B732D3D8
+:105C2000AE35407F4FC0F86B1C5178DCAAFEB9033B
+:105C3000FA74C23FC4E3D08DBC1E9937D4A3E631B9
+:105C40008C45BDCF8EF473A1FDE6379BEBD67EF37A
+:105C5000347D12D2ABD16F3EAB68F0B9FFF7F67B63
+:105C600029E03C3525D2AF314EBFFD023954C0B7D3
+:105C7000F91B59289C1D3B4E9EE62F0FC2FBBC8D85
+:105C80002A0B65F3E769C01779FC57D6E49B94109B
+:105C9000288C8587458F93135997BC34FB1C19E8D2
+:105CA000292FE3FA4512D25573D4FAE63066F0CDC7
+:105CB0008FEA7D4C1FCAD8DDF505546EA9F7E9C8F7
+:105CC0002777FF5D99D55218CB8F7F11F2EA1E1B03
+:105CD00023FA0B3ECE428F4BD85FC5AC39505F3FA5
+:105CE0002ABDE82E8D885C4679E61274BC5ED26EC1
+:105CF000C8C1F6AF280CE5A0951FEEB6E9D3B0BF3A
+:105D0000B5A364A901F19CC7F921CF1676E662BF5D
+:105D1000CD39A382D88FFF55E287BCFC4B3405C632
+:105D20001D9627F861F4834E94873DF35F96AEE7A6
+:105D300015339664A103DF79D2816F42DF74F07569
+:105D4000F1C3D7475FCD7DD2D77AFF7DEF3BE0FD32
+:105D5000963CBBA664C7C295797138A3C21D4B6F30
+:105D6000797982CEFC7DD399B57CB03EC4DE011A30
+:105D7000BABF3E83E8EEDE7A8DCAB5488730EF07BA
+:105D8000B0E958A8231DE2B8D71551BDD77D8BAD1A
+:105D900020BA4C9FD5CC50FEDE8FF4390E875BA91C
+:105DA000EB1360AE79A20E5BA40C7BC0BDF87E1035
+:105DB000D575DCCAEE928CF6CF0675C0778A683F3F
+:105DC00075C5B3C146F8FD7E17AF5FBDA2530F6620
+:105DD000457D1F5CA7EB5991F6500F4F52A3FAC3B4
+:105DE000FE0BA3E13948ED8DFEE6AF38A10701BEF9
+:105DF0007B5DBCBFB52B8EFD53FA5F2B053240B5E2
+:105E000060AB2CFDACEDA9DFAB231E8C7172A45FDF
+:105E1000E8C1E8F7C16774DD1D797FB9746F10DFE1
+:105E20006F64157912AC43E6F48A0C06EB6FAF6829
+:105E30000EE296DB039FC077647E0F12BCAE0CFEB1
+:105E40007EC48ADFEB8D51EB3369C5CB4184D7D05B
+:105E5000731441AFF20B594B8F00BD2A49763FE9CD
+:105E60001BD701D364C278B32A980670C969150C90
+:105E7000E58192A6BE1BCD0706FD019C6309CEC934
+:105E800015B37A8133180DA701477F701B70F44E4C
+:105E9000A77C7C2B3D4DBA66CCEF26C0FE6D6FB75C
+:105EA000F9515D48453C4157ECF35B8336789E3AA7
+:105EB0001370ADD1BACD62B9B1FDA64D1FC4425128
+:105EC000FBF73F7A5DF3B0CEF116885E5FA8CF9501
+:105ED0000644F03856B4B3D29F313F5BCCFCAE35AC
+:105EE000CD8FA9818C0A4FFFF3BBD7E59F55E18E7B
+:105EF0006DF75B49A2F1274D19F36DC6C7630E908C
+:105F00005FC9385E5164BCE469301E76A636C71D91
+:105F10002F65328CE7FCFAF069E547035E7B0CBC29
+:105F2000B79AE05D6B03BE8DB3FE5F37BCE7CB7FF6
+:105F30002E90BFC47F797DF3DF3FBABF64FC153E6E
+:105F4000F94865E12B015F775CE524FDDE9073FF86
+:105F50006C7CA5E2A7B07E77BC547CE24A192B404A
+:105F6000D72322E3D74A1AED57BDD1776FF3810DBE
+:105F7000D6D4CFFFAFF9F486D7AF5B0E9DAF7C6D63
+:105F8000783D81213FAD2C642107F4B1B2ED2AB2F6
+:105F900037571E291BC8A05FDB9AE14C8749256350
+:105FA000FFD0DF4A43CF985CD24FFF5CCF00FB4E5F
+:105FB0006F02A56BB7B782F4A29512A3EFD783DE69
+:105FC00016023DA6E4950DCE3958F7EF70CEC1719B
+:105FD0006D8CF4E992570EF9CA80CE5D23524629A2
+:105FE00040022B5DC6F3A3E5A8E7DE55289E7B782B
+:105FF0007FF0BC02DB2788F6BDC1959007F044AD69
+:106000007FA2BD395011477FD76599F0F390D0BB7F
+:10601000EE46BD0B047262424B00F56A57BA5D7BD7
+:106020004C8AFDEE265912F306BD0DEDEC115332EC
+:1060300051CF3A30E389157684AF90915C77E5854E
+:106040007419EAEE02CEDB0F59F67D37AE21E95D19
+:106050009952994ADF99EA77F7E831D913516FF3EA
+:1060600016F0F7650D574C6C8C7ECFFC1371FF3525
+:10607000DE071A4AE97DA6B3E2D804183F13E468A4
+:1060800023E02B536D96EA685DD3E2EA8F1BE63B73
+:10609000678500860D331ECC9E1F673F81D534F186
+:1060A000E9A079663E7B48E0EF6E81CF4CE4F5D104
+:1060B000820E41BEB978D31EF9E61ACAE55B4241A9
+:1060C000F30AC4F7A079CC8FFAF686194F90DE6AEE
+:1060D0008CE32A30CBB94CD53CAFAF6B3E1B99FE5D
+:1060E0001D7974EFFD5BF96C230BDC8AED33C57E03
+:1060F0009E5010920285FDCFDF3ADFDEE6FD2DC413
+:10610000271FA74E1E103BCE3F0B2F996E18A7E4FA
+:106110001F3F4EC23CB3BC3C5FBCC33E20E88C2951
+:10612000B81F58EDAB84129FC464AAB6A31D4EF2EB
+:106130001BE0F6B0E6F24B80DE522B56DD2E83DDFF
+:10614000EC79EBEAF7D1CE4EED9843F676536151F8
+:10615000DB246897E4F7CD984274CA08CF6BB1335B
+:10616000E2BBAA1513615E8D8CF3DD66F996895C3E
+:106170003FD069BDBF2B70062BAEA950477665395D
+:10618000F1E66167613E6FE90B47ECF7BDCDDF16C5
+:10619000F94EF8FF9690DFB4BFEFD8743BF9118346
+:1061A000F00FEDD2644B3F49BA3DE2676488A7A87F
+:1061B0003ABCFF6D0F5FDFFE4F19CFC7EE736A4029
+:1061C0000AB63CD987F67A12F325AB2867278342B3
+:1061D00000A2D897D61D94B5FED7A589B1F29642F4
+:1061E0004E7733A2F4DC0E99EBC969332767AF848D
+:1061F0007ECF9670BF70AA0FFE17C5CE671DEC6BE1
+:10620000E1283FC7BAC2C7887F1B819E72802F8258
+:106210008532F9B7D7E6EDF045F3B5AC18FE6D2B36
+:106220007D304D2D15FA1FE047C99375D7C8AF4E85
+:106230001FCA97A48FC4E951DFB10B5FAF24E5C239
+:10624000E8E3AB8E67AC6B2C5F71FD246DE63C27F9
+:10625000EA3BAB326626C593B3BDAFEB7DB4AEA8C7
+:106260004F84E2F49FA64871FD39567D9EB1A5A6E4
+:10627000F5520696CEDADCD7BAA599F161F4EB5A5D
+:10628000A668FF85C24BF5915FDC29FA5BABDD1791
+:10629000C4FDF32CEEED800FA5795418F53D96C79B
+:1062A000FC8FF326A487B8343D443A24CADDD208D3
+:1062B0007CF62CD9349E9A9660C2379B05DA761408
+:1062C000FCAE657682C389E3C1388A0F3A94D0FF69
+:1062D000CFC22E2FF548FDE1505FE462FD4E131D45
+:1062E000ACCE2A8ABBDFA9625DD16CE5F47AE7F90E
+:1062F000C917EB78D799E13DEFEFDCAAF66E1CFFEA
+:1063000071EC772A7BD7C01720F1961E7AE7EBB4A1
+:10631000CAC6F64849200F32AE67010DEAF80A36C0
+:10632000EB35588E453A2CF2915EB05552114E62C3
+:10633000690DFF737DBE10955BE84F7606084F8AA6
+:106340005B67D45E3B3F7DFF9CD0AFD3843E6FBC88
+:10635000FFA162A77E5556C1D06E3EF7F6D40CEA77
+:10636000578747A51138ACFD162A811F2A0390ECE8
+:10637000383CF801FA09584701F9B5F305CECE3D8E
+:10638000303389F5C15F0F59F8EB2189C3C92ACE93
+:10639000CFCE380763B6637B359040F1B29305C426
+:1063A00007B962FC27D6CF4DC0F19FD8D8379F1BC5
+:1063B00070FCB4DEC9C2A0A786EA7D541AEF43C2BE
+:1063C000DFBF59D831C6F3738A4C70EC137CFF845D
+:1063D000B32281FCE7076F9C360CF82BE7A8E24755
+:1063E0001D4F5BCB52FA1A3F3B68E637A6CCEE1343
+:1063F000DE656F4D9C71288A1F7FA178D2DE1D0E4D
+:10640000BF5CCE2E47FAEBEFFB73F5FA8C43F95FD6
+:106410001D2F9B85FD79AEF1772B48CF095F49FC95
+:106420009923E448CE3C2E0F72AB594843FEFDFC45
+:106430000B164D1F6099109E32AB558DFC4D4C775D
+:10644000CF81F743C5DB4C65BA8C5BF850D4BF50A5
+:106450008E6CE2FE73C3CF0FEB7E17CAB9CDAF29A6
+:10646000640BE7556A0DB8DE39EBCDFEFDC12CCAD1
+:10647000EF8EFE7AA1D7655AFCF85F751D3A701D44
+:1064800012FFF9EB105219D19D51D72456116FFF0D
+:10649000FB44D0A9B6E210B743C0F87B272A1E01FF
+:1064A000EB99829BC04F83F74D44BB35B886F9F317
+:1064B000E3C84B9B9A48746F637A7828FA0FE65CBE
+:1064C000DFB117E5D50466925F71E4864DC5EFD262
+:1064D000B8DC080567F2F27385E265F9EB5908E369
+:1064E0005B9337D4ED47BF5E6635B79B33D7042542
+:1064F0003BD473EA981F87C9AD64BCFD6C16D27992
+:10650000BCE66806D0CD104137430C7A5966A69791
+:10651000C17596B8D01A737D20D2057C37D0422F32
+:10652000D67E723446F1B8BCF5328F17CD32C77DB6
+:10653000F259F7FB3F0778F30FB9FD61161B6FB2F5
+:10654000F6AFB24001E265F70FDDFF590013FCD949
+:10655000FA49A98817902749244F2AE2DB3D31F4F4
+:106560006AE81BBDB48FC84FDEAEB7F7ABF2D39766
+:10657000CE0538D67A7446E307B349AE2B225E794E
+:1065800030F37A6707FA6DDC4524DFF7631DFD3CC5
+:1065900019970C8C96F78AF02319F546E147B28ECD
+:1065A0003755E57AF07B4C9F8A7818E50864605C83
+:1065B000CF9691BE730E8C67F381BE15E7BBB16AAF
+:1065C000029FAFA6FE2D1AFFB071FB481E32BE1F00
+:1065D0003377CA79E1A3440DDCA442199C04660414
+:1065E000D27F0E0B35E2FAD635F3FD2DD2EE16D161
+:1065F0002E8879053DED02D06E84A9DD3C9C0FB458
+:10660000D34DED2A62DADD26FA63A671F598716B37
+:10661000447FA4CFF5B4F3C7F4B754B4233DB0A777
+:106620009D16D3DF3231AE6E6AE78B69F7EF067CD9
+:10663000A6719979DC9EF7A576E33DF9630FE44FE7
+:10664000217A39943FA57C2E8CB3F4451B97115BBE
+:10665000793E874157FB45BB26A4AB42CC5B6163C7
+:10666000AA294F85E7AD34BA673A0351CF7BE8CA10
+:106670003DD317FFF95C537B758D8BE9C5F49CDA2C
+:1066800037FD5D11F1AA1F4C427FEBEA3459F8DB6C
+:10669000AE69D05590630354537D4D86786FBBA689
+:1066A000810262223E02B2F29B8551FCDD33FE3F45
+:1066B0000B7EE13F8EC03FDB02FF6C33FCA2EECCD1
+:1066C000E4EFD595B327E17C0CFFF2D9A6E50D41A7
+:1066D000F7FFE6F95559E65765995F95697EF69596
+:1066E00055938279FF97E6B7CC32BF6596F92D3383
+:1066F000CDCFB972D905AD9FB5DDDDB66692B76B6A
+:10670000F35F27FD7FAD88E326ACD41B56E07BE02A
+:10671000ED76EA4F23F93E8AE99FA33CE8EFBB47B9
+:10672000548DE482D323935C60F9F6507E36876BF8
+:1067300026C885E7541F97DF02CED72CF50F2D759D
+:10674000F8E56FB86FFA9861475AE47C3FFBDACA04
+:106750004CBE9FACF2F8E5E87D4D15B83938A094F1
+:10676000E44FA38FCB9FFD03843C4A837D8DFC4483
+:106770001924AF6C425EDD57CFF3D89A457E506343
+:106780005A11E1A759D80B2C9465DA370F4C9CD2DB
+:10679000867EAB334779DEE23A1BD7C756D6339DA8
+:1067A000E8ABDE49F945FBA0DF003468057D0FCB7F
+:1067B000E741DFC3724F7D0695BFACD7A8DC01E38C
+:1067C00062F94CBD9F0560FC6DF563A8FC31EA8B56
+:1067D000503E20F4C52BD264F2576CAE872D339F08
+:1067E000F4482A1FA9F78D5561BC9FD46750FD233B
+:1067F00069E6581BD9AD1D8D4900E7EE57F3285FB8
+:1068000069429A4AFB2F53C34A5249E4B981D78F50
+:10681000A44957E077E33264DECE196AF4C66F57B5
+:1068200086EDC664A8040F7307156F5ADC76E5364B
+:10683000C04BA95BF4E70B347AE2F7F72D6C57E411
+:1068400016FDA5698DEEF8FDCDC47147FA381E58C6
+:1068500046474362FC763760BB429F986F56584E5E
+:106860008C3FEE6C1C3725A53980F1AD2B6733D2F8
+:10687000476D69DA66292A3E141A50C164A0F39460
+:10688000D4E63A6CF78D809FE5C0F89AD7CF64A024
+:10689000679B1BDE17624E138F478DBF0EDEA33E34
+:1068A0008CEF4744BDC7EFA11C3B4B7C9F647EDF50
+:1068B000A397AF613D793C98BC646B32D79365CEAA
+:1068C0009FCB571E98847C9F6CE7EF7F8A75D4B767
+:1068D0009633431EF1F609FCFD8F8CF65EFEFE1723
+:1068E000A27D4A0A9FB76B8A338471B147BE7B4948
+:1068F000E6DCC2C87C2FFA5EC1B0B951F37BE47B01
+:10690000E332E7BA23F3B9E8FB1386CDEDC3EE49D2
+:106910002D977B7264516E25371792FC1CE5A820D9
+:10692000B9336A60A98EFCACACE770FD87EDAE862A
+:10693000863C822B88F2C680EB278BCD700DAE3162
+:10694000C3F5931A335C836BFB866B9D8DCBB5DEF1
+:10695000E083F1F5E8F11FFD37F3F8437E601EFF99
+:10696000D11F98C71F72E7571E3F1CBD2E9B6E3765
+:106970008F9FB5C43CFEA625E6F1B3967EB5F1FF28
+:1069800051FA78922D70C426F45D255AEFAC0B981D
+:10699000F45368F78A681754A2F5D840C0A49F4200
+:1069A000BBD76D42DF35B5AB8869F707D11F338D93
+:1069B000ABC78CDB21FA0BCBD1FDF963FAFB8B68FB
+:1069C0001794A3FBD362FAFBC080CFD4CE17D3AE0B
+:1069D0004BB463A67199795CF82950A19FEFB30479
+:1069E0003FFA47964D5E4371AF812C20A1BFCF97F0
+:1069F000CA461D82EF592ECFBF4F9EB2EC62B43B08
+:106A0000D7249BFD5CE9766E9FD9EC0A95BE44566F
+:106A100047F900CE60E68CA87C8B6A3BDFCF7ADE3C
+:106A2000BB8399D746BD1F28BE5F23E2D469F6D247
+:106A300046942BBEC1D03E8EBF22538C6BBC67697F
+:106A4000FE761DE0DDF8AF3347A3BF2832AE8DB729
+:106A5000BB588C9B151FAE35D97CDC45386E213E6A
+:106A600037F48B6026E1D7C74BE3F9839EEF49FFEC
+:106A70000578593DD9292B49F07E3DF76F1A7EF6EE
+:106A8000647B9D13F3761B2F92D963D82EAB6F3F97
+:106A90004E53BDD9DFA9FA2A74B4F70655FA8A1401
+:106AA000D6FB770F97CBE5F1E20DA3C5BC9A2A2759
+:106AB00035E7C1F8EC90D96F0B84CDA2F3610A954C
+:106AC000C0687B3CBF6D538129AF3E7950DF7EDBD0
+:106AD00046A15FF4CC033A8AB77E370AF8D8C602DB
+:106AE000939E959C3293F4ABE486AB9DBE38DFADAC
+:106AF000B5F4EF6233756C9798D6CC64EE5C34E9EC
+:106B0000614DBEC7F83E94093209E33F693BC2C8F4
+:106B10003F674BF8790A3523149428CEC1E7896A78
+:106B200025FE24AAE1A00CED076D54593895B1FB60
+:106B3000E5C08D881F575E33F9C7549F2E219ECE26
+:106B4000D94257D379025017E3E57FCCB3733FF0B6
+:106B5000C3DACCDF65C759C7DBEC9A492F1DF4A90E
+:106B60009D858B7B6F1F69C7E1EAA1D30CA04FE421
+:106B70006F8DD3E9ED8ABED84EFA5A968FFC8E8679
+:106B80007C35F85FC4B7E78E61E247BBE10F308F19
+:106B9000DBDA6C3CBFEF73681D15F7B94DF8BFE643
+:106BA0008A78F73C56E1C597A7995C8E7C759ABDAB
+:106BB000EA2D8E5AAFB5763B1F678D8DFC5B463C48
+:106BC000777EB3CDE4EF5AB8D15C5FC066A6A35C14
+:106BD0005AB0C1C6F07CC76D167FD8BFE17C615E3C
+:106BE0000B59DD2AD4D38DFCA0B93EA662FEF7E294
+:106BF0005F3D528A7943CD769EAFF301D08B16C5A7
+:106C00005755EE901DEDF97776155F3F9EE1F7A1A0
+:106C10005583509E26B3B8E78C6E5D6386AF3FF810
+:106C2000ADF032D640F0F60687BA558AEBBF7AD47B
+:106C30002E99E244CB9CDE910CE4CC39172F7BFCDF
+:106C4000297F74917CDF27E80836C0CBB89CAFBBA6
+:106C50001CCBFEBE3BD8CB778B9D1D76E48F5AB5FF
+:106C6000AE5C92237126872DA00F86EF6C7B268663
+:106C7000073353BB35E7D9AE4DCA39AF76E5721F3E
+:106C8000FD750A79F9C2B69FD9D1BF78FAA913D791
+:106C9000201F2EFAB5C29CD0AE739B8785715F50C2
+:106CA0004376942755BB94B871598AFCC3FC17FDF1
+:106CB000C24372A26A8723341DBEAFFAE53B231993
+:106CC000E0A1B3A1FBF060DC479F92787C34D8311F
+:106CD00012F7AD2A95DD122F4FEC84A0BB53CF25C0
+:106CE000CEC27595B6EEBF99FA6DB9C1E688920F1E
+:106CF000C7C4BE04EDB87FED4929941F477E18F143
+:106D0000AC534F4A1CBE3DB6900BE1DBBAD91E0016
+:106D1000386AB77E487454F68BED5EC443ED1EC5E9
+:106D2000E4F7ADDDAA841D23A93C8125C65124E0EA
+:106D3000EB1AC6E563CDAEC5E40FAF6959F7A1E222
+:106D4000C5EFCDF40C78F18711AF6F28FEE958DF5D
+:106D5000F973AF06A8FAA0FD712FE215FA9D634FF3
+:106D6000C278AED98F8DFD7F9A12DB1F63DD76A4CA
+:106D7000AFDA96B57C3C0BBF7C80BF64C6C64F9C27
+:106D80000E4B1C6B6BEA79E9898BB69F7D3408E367
+:106D90009DDAF1D74783B87FFFBF8F1EBD13F59AE9
+:106DA0007D2E1FF27BED53AF7959D43E98E3E07C02
+:106DB000D7F9E4CF9F7818F8A4F3B8838EEE75EE78
+:106DC0007D6F8806F3ED7CF6BFD335687FC7DEABF9
+:106DD000C8EEBF6377D9C0BEF643A4D350F43917C9
+:106DE00091C7A4ED9150D902435E94967539B84B82
+:106DF000612E80F3F4314708F39A6BE1D9B2225C3B
+:106E0000A7C5247FB1BE1CF05BB36DF587CAC878F7
+:106E1000780E0E9631C79E01BB64E03A5FFBED6FC2
+:106E2000946069A338492DEB26F969FDAEF628ACCC
+:106E3000E765BDAFDF59F6B91D8378B5DBD6F271D2
+:106E40002DEB771A7F191BBB7EBA65FDCEB2EA9F88
+:106E50003E8C2F77A5C68DE71AF1AFC5BBFFA54FB6
+:106E6000BDC99003FDE1B752E270791C7A8503F940
+:106E700069C7D34F3C9CC6D7773A20A473FBD9216E
+:106E80000CE8E3A4ADFB66948FDD7B1D3EDCCFAB4D
+:106E9000F6BE41FCD5B9FB15BB46F291B925D0131E
+:106EA0003A59CF4F3BEA0D3512AFD46EF1841DDE57
+:106EB000C83AD58466946B5E7A7E829E8738DDD729
+:106EC00084F65F27C559B7D58E1C2E8F433C696F5A
+:106ED000F1963FD899DBBC9ED2185CC71353F0796A
+:106EE0006FEB68CCDF87F3BF3C6A3DB7707EED8DFA
+:106EF0002F3B373B54CC4730D6B7D3C6F5FDDA909D
+:106F0000F4068BC3AFC6FE76A1F1D00687251E2AF4
+:106F1000E6DB1F3FF73F8F0BC3D3124CAA1C1D8B20
+:106F2000AF539FC797EF8F382401475DF9A0DCD896
+:106F3000FD496515C1C1D911784F8973B3A79E5218
+:106F4000424178BEAAE520C969AB5CA8E9454F7EFD
+:106F5000C6186FCFFE9128BF4E1D788EE8B066DB55
+:106F6000093BDA4787B7EEB4771446E81EE57F742D
+:106F70005EE4A967F68F24398DFDC7599F5F0B79B1
+:106F800057DB6AEEBF76DB87A6FE17055BECE417DE
+:106F9000ED679C0F54FD069CEF07ED368679F71FD1
+:106FA000B428E5F1F49B90C366CA835AE5293D866F
+:106FB0007E4525C5AEA1BC6B5AA1BF11A4738F3607
+:106FC0007EEE51D58F39802F1B93ED1ADAAB4D9E93
+:106FD000EB991625B79B2DF8F4A5F926625CCD3701
+:106FE000B9A224DA7E32E04FD66513FC7778CA075F
+:106FF000E27909B4C3344C3250FDE45756BC53CA4D
+:10700000713E8A4FF6B9E2EECFBC3FF4B721FDDB0B
+:107010007C32D3A2E86B54D9F5C3D1D5A632CD9436
+:10702000BF7AEF641EC735E67FEF456C1303B97B6B
+:10703000AFD4DD86F9ECC1AB795E201376BA17EDDB
+:10704000F4EC587D8EE9BA86F287C40F6FCF7423B3
+:107050007F147EBE0FE0C898BF23FB4999FFBEA2F4
+:10706000533E8F1DC7CD45FB2944CF135998EA8A5B
+:1070700093CB1F0FABA3E749ACA319CF30BDEDA84D
+:10708000F8D401CFEF2B4F9138DC61CAD74816E313
+:10709000C88959997DF13F9BAC9E8AF6FB38D8266A
+:1070A000B24BD0EDF8456A040F463E9CD1EFBDAE21
+:1070B0000912EE3738BFC178AE479C9FF7F5CC5721
+:1070C000A7FA00A36E19075BFA4AC5164BAC1890D5
+:1070D00054056F0D68263FC720D64265166BA73250
+:1070E000C5E9935482EF2DF24BC9ECCFEC8B440BE6
+:1070F0007CE7A18F9F93F5E301281B6DE2F9DB9EEE
+:10710000D0E350DF90CC4CE783739D9CBF2F77CAB0
+:10711000865F26106D7735B26A9ABB2B8D1F63315F
+:10712000BEBBDE1918EE8CA227C5DDCEF3BE84FDF2
+:107130006BD8EB5729CB29FEBE3A83DBD5BDADCF4B
+:10714000CAFA0A935D6D2D9B0738E76C66043FF71A
+:1071500053494E7E7E59679A2F9AFE605C67697428
+:107160003EA3AE937D2FDEDB607AF8D28178546245
+:10717000E96F06D2DF68A4BF0ED14937F9296E57EF
+:107180000257E37C33F2EA24FE3C2071BF97AEE065
+:107190007CD345FF72627566A08F79B259401F514A
+:1071A000792D1B84FDA8AA4C4D284278368975B7E5
+:1071B000D2A5393FD5D0D7DCA2E6107972BF2979A4
+:1071C00095CEA3A8696ECA4F719734DD8EE77C55C2
+:1071D00056E743F9E936F24FFC3C9FD0B08B5D0592
+:1071E000E63C4E87256FD526ECEF983C6EB1EFDE7E
+:1071F000830FE2E8C3D67DF77667FC3C2436267E13
+:10720000BEA0A1879D2FDD5BEDC86A67FB611ADC1C
+:10721000A7539EA52AFC0D13AFF3911FBC6B9BC413
+:10722000CFAD59E8A86B47D2489487C8BF78CF45FF
+:10723000A2782E6DDBBF1FF5A6262FD3935348CE21
+:10724000694A2E9E971AE594A05CBCEBC3977F8D8C
+:10725000FEF55685E1D6DCE536E2937A322E5622EB
+:107260005B6F5ADF0B9D4F6C5C91F3DB129FC16F1C
+:107270006EFAFECC3689CE4F296CF88FF1FC436D47
+:107280009B8D85E0FD19C6FB3FB389EB030B5F8443
+:1072900051F03CA8181FF7A5E8FD23B53C8169D142
+:1072A000793C41BD1DCFFFCF13F8185091627AFF92
+:1072B000D7B9E56DE49F09F07B0006CE1A64EA6F4A
+:1072C00091B27C2825E1093F8606FF90FE8CF99F4C
+:1072D000930376BE4F542485499F01FB17ED86909A
+:1072E00044F94A567F47CD1E89F6A7DB607FC2F37B
+:1072F00038B7852CF6A3258FCEC0B7952E0F3985CC
+:107300007DE066EE5EF0EA0F97507C94F86AC98BD8
+:107310003C2F6CC976294479CC1D439318E159213F
+:10732000BFD17BACEE41D83922F46BC19B23C38C17
+:10733000679766C673628119AF1EBF198F563C27C7
+:107340008DC931B55FA454DB89C8049E0BE01FE2F0
+:1073500019E420CDA306E611D662F159D97AEF2AB5
+:10736000F46FF48B470BFE4E59F07796B5EEE76F4E
+:107370005985339D589BE69DA986897FACFC66E0C4
+:1073800029CBD73E919EF93DE42FCE109D48F3F8CE
+:1073900077839C2D9C798AFCC46F467E7062CF7E79
+:1073A000F90EFB02CAA5330E9D98CB62F96B1396BA
+:1073B000C0D72DF54EDFBC7C8C4F33DF3C1BC6ABFA
+:1073C0007D54C6D947A97FA047DA0FEEC1B8641A29
+:1073D000F2B54AF12B5CAAE9504F6CB5F9D06F7940
+:1073E0004F51F735A8B7D7CEE7798E372770FFEB27
+:1073F0009204BEBFDA12785EF35D1532D3D1BE6F50
+:10740000554212FA8B7CFA8B57A2DED56AD3685F9D
+:10741000F375BFFC1D7A5FECC3F86EA6DC3C0AE195
+:1074200080F6E46FEF6A7DC77B6B94BED3B9E7FE4D
+:1074300061B8EF3C24B3CA787A7CBE8BC3D159F0D3
+:10744000E77424C7C5CE6EB2A35777D455E0BC0C01
+:107450003BC2BE8BFBB76AF6CC207DF2D0027E1E0B
+:1074600073F7297E1E738A32FB9B23A03EF6359567
+:10747000CB4DA64F9F93CE5328701D3760BE24F28C
+:10748000C17FC9A106C24FF3EF314ED5F81795A1C0
+:10749000FE5852B780F69F5F7BA7B46159AAB71414
+:1074A000235F4F6E4D9E88E7646ADFE27995A3DB28
+:1074B000CDFE1CA6541F443FD8D9637C5BBEFC980C
+:1074C0006AB5BB14DC8FC776989F8FEF876ECB5C55
+:1074D000623FF2B2F40BC98BFD91AC4F73917F9474
+:1074E0009FE3F2ABF1EDA74713B87D037891504EBF
+:1074F0007575337F03E0A96BDE209A6FD7C7FC6AEE
+:10750000A6AECF95F278F6D12D2E4E2F0FD979DC7D
+:10751000F6A105EED00A98C781055517A35DF4C9F9
+:10752000BF052E8E17A788D8072C49A63D4F4F625E
+:1075300063902F9AF8F932D69C19EFFCBCC10F0664
+:107540007F187C91B9202110CF7FF98E8BCF6FD21D
+:107550008202CA83EDDC27518CA7B301E0EA038FD6
+:1075600041D63018E1A9DDF311F9179CADF1FDD03A
+:10757000F5784803E9B621B8623CE0EB7BC0D44122
+:10758000E4077B7376BCFE836C03F99B16B834E288
+:10759000B74E27B7A399DA9C39D3837C5276F52A64
+:1075A00080F361E03F24F9876C7E823BB89831F22A
+:1075B000AFAA9CFFB3AE619BEF8AB2B7D6BA263EA4
+:1075C000E082FE1E70F178476AC02F21DCFEBF9F6B
+:1075D000F362FF5D9F3A68FD06093F8FF15D8BC046
+:1075E0004F5982FE23FC9E55A69130F407BCBE790C
+:1075F000B0FF5FB607F01D27BFCBD077520220FB4C
+:10760000009E14B74CE756D0DE427BA296193F414C
+:10761000523E0DFEC34366783ECB90B752AB14F694
+:1076200080DC2C71BAC3E84F49A98479633C8A395C
+:10763000797FED667D14252FCA5D94013C599EDB50
+:107640003B861C36E477533297834DF7AAA146094F
+:10765000D3DF3B5CE83FCED6B549985A95A26A94F1
+:10766000E7705125F3075148E63E92DCA3F78C679B
+:10767000ECD9BF2B71FD1B275DDC1E294B08FC0AD2
+:10768000F135B2ADFB00AA4F7E174BC5F59E22F433
+:107690009BB1A7B93C32F2FA6B85BD619547CF012A
+:1076A0009DA3C018FB0DBEEF8D3DEDF623FDF4C884
+:1076B000A10553681F2D6A2D3E88F939456F717EEB
+:1076C0006442FE80F54678296D0B2A880FABDCE911
+:1076D0004FDE18F2C4BACEA05CF7D4B30029C56D52
+:1076E000C06751FBB7554E1D7389FD55C8A9B36CD2
+:1076F000C2C0ABB4083D152DF31F7444D18F21A730
+:1077000022F414223AB48E2331674FDD978BF2E5D1
+:1077100088827E90AE893C3EB942F051F2C7A1AB5F
+:1077200071FE1B5AA7BA90EE77B4953991AD966465
+:10773000F0735EEAFEEB824C904F745CD7C69C1AE5
+:107740009E291F0F2B8FF8507C508F9AD79966492E
+:107750009C73D492AE8B733F82512EC9E0E7B8760A
+:10776000B4E524713B334CEBDE43F7C20F61F08587
+:1077700041EF56FA36F8A19171BF84A13F28528B90
+:10778000B00BCD7E8146C3CF1174519CF80EA10F72
+:1077900036BA2F5937017E6D0A4FF2615CE20E4F07
+:1077A0000EE533DF3180E3CD8A07A3ACFD14F4C3CB
+:1077B000A8BCF35AB59BFC5AB59FDA4DCF0DBCF669
+:1077C000860F03AFE310AFD297C7EBA7B8BEA36392
+:1077D000F1FB65E79DB5644CDCF372FF57E63D9E17
+:1077E000057EDD4176173FB761D097212F4A976E0E
+:1077F000CC24E26837DFEB65C891317BEA0EA28AC0
+:1078000068951397B5B26B114F63C32AC3A32EFDBE
+:10781000C98D8FF1974C3A7F716302F0DFA817662C
+:107820002DDA068F466A2C753A0035B25D2539C6C9
+:10783000DACF2F0ED512FE381DFD8B865E1A8357C8
+:10784000A1971AFB8B11075A9710A8C4F1A53DC048
+:10785000375ECC3FE5F6EE5A57605102B44F0498BC
+:107860001330D7AE209CCDED53335FF6C687891613
+:107870003E6B01BCD03904D8E7F2A558388CF1F33F
+:107880001292399C406DA8BF6495323E580DBFCF0F
+:107890002E6B240BE03E8CC736719E6B85FE759770
+:1078A000A55CEBAA68C079D9541674147D79B80D1B
+:1078B000BFE0BA043D88F87096EB348FC13EE647CE
+:1078C000BD7EB0DA22F9018E946A4DEA71D618FBBA
+:1078D000379EFB99AE4D44BA189CC7E83CEC60D487
+:1078E00083E2ACCFA6041EAF5DECEC388C21F3DA5A
+:1078F000E975E5DE3EE2D3917B06FCC24F65CEC35F
+:10790000E8DAFBC64518977CFBDF3FF260DCE94F05
+:107910006AB707E13CB9FCF71EBCBFE5EDE5DCCE7C
+:10792000B8D9A2CFEC14F84B4EAC780AF1774BFDE6
+:10793000DF4BA3F99D2DE37194DB420A1A9D3DF4C0
+:10794000BD686B22F9E68CFAE2965453DDA0D3C5EC
+:107950000E9E27659DFFFBC28EBA6DDB66FB600D38
+:10796000C70FB422BE4F0A7DEDE42E0FF9330C7819
+:10797000E66E1B65473CFCA9D521E2F0ED368E7F13
+:107980007D3AC6CF026229AC701EDE9748FDCD7FDE
+:107990004021FD620E8CB50CE83BD07A1BD9D9D6BC
+:1079A00079CC7F5B9B3210D66FFE5A89F4526CBF44
+:1079B0001CE821B06C35C5D9ACF39C13B4C6339721
+:1079C000939D6ECDF398C7B47513B2E3E47BB4F224
+:1079D00038F9C27EEC9A3F26087DA1945D8EF9E8C5
+:1079E0006759E18F0AB5FEED9A93F58C92B43EA8E3
+:1079F000775279AADE47E553091A8F67EFD97F9846
+:107A0000E84B6D2F457EDFD1F64EE24D5A446E5F56
+:107A1000B1F9A3833F817A31E3FE1BC33F3E5BE0B4
+:107A2000FB4A21BF170A7DA0F8D3BEE5F76C9CEF97
+:107A3000C858780DB93D1BEF958DC28321C7ADF8AD
+:107A400038D3969B887421255AE3C05F0D2FBD7DE6
+:107A5000B758899F3768F0CF53C21F306FCB8C5512
+:107A60008360FCC6BDEF0DE1F702B3A3281F0CFA3B
+:107A7000B4D21F637576E4E71E3A6BBD9BF063D00A
+:107A800005F05186883F66A0DD67A5B7FEF2893A0A
+:107A90006D1D43500E58E9AB536271EF154D4DE427
+:107AA000FEF2799A3E05ED50D85E56F1381D973FAB
+:107AB00027D5E6C377227F6EE1FCB1F857DB7F89DB
+:107AC00072A7EA170F7851EEBCAF36A7E378D58FCF
+:107AD000AFF4629CFBA41AF4E2F7EF8794B87985BF
+:107AE0000B1325E10F37E72BB035C16B906F3F7952
+:107AF000DCE6433F43ED56078F83EFE278833A8F0E
+:107B00007FEF8A9FAF50F5F307D2359EC76ACE5BF1
+:107B1000D862A3FC13F497E130BDC5717BE2C22D9E
+:107B20007DC7B76B77AD8B9B7762E40758E9F606A4
+:107B30000BBD025EC88E09023CE4161771EBC62726
+:107B40007F3CF204C0756ACB6FBD5261B4DF9CC745
+:107B5000C7CFB4DCFA530CF1F446AF9D82BE237A52
+:107B600043286E1E43B52DEC453BBC7AB38DECBA71
+:107B7000EAED0A73623ECB7107EDDB8BB6FFE6F5EB
+:107B80007100DFA2676D69D3F934285FC158A79EE1
+:107B90003C12B12E553B7FC3E3BD9AC82711EBB30E
+:107BA000E8D9FD76CC8BB1E2B1AC65BFBDC3928F95
+:107BB00040EBD472620A9DCB7BF29C1DF7D3F7F7A2
+:107BC0004974BFB2F5FBCACDBFF1A27C403C515C09
+:107BD0005EAC57EFF942E16B9E2FA176E487EB6D27
+:107BE000FDC6E0DE3A9AE8FB99E761FCCA371D94CE
+:107BF000AF54F9CC52CAEF794FADE374FEC8CA74E2
+:107C0000DC5F2B6DC1741F95FC79E5A3DF25FA5B62
+:107C1000F8CA77D3F9791E3D93FB6D829938BFF985
+:107C20009BFE85E6B7800588FE2A1F512AD05F7229
+:107C30005665E5CFC6E1933F093E79EF310706511E
+:107C4000D97BC26F197C5511F7FE5AE349FCBE95EA
+:107C5000B3C28EDE95281BF71439A3EDAADA2DAB3B
+:107C6000DB717D3EB8481FE8A3B8BE1A14F89248ED
+:107C70001F7FE5AA81428ED13D31869E5386CFB1CA
+:107C80007DBB8DEE8B89FACE74DFCB1D627C803B91
+:107C900041BA0CCAF4F8FE4C8F5B32E0E3F92F06D0
+:107CA0007DF5C6F75B783EC9C747B95CC1BC187A99
+:107CB000DF6E0B0F34E5C3384CF78944F23D6C821C
+:107CC000AFCDEF014ECA57E9C1EF3E89E2AC0B36AA
+:107CD00038CC79703D7463BDE7C69CBFB2D0A26F4B
+:107CE00019A5552EBC69910B6CD3F9E5AF54DB4255
+:107CF0009477547DDC41F643F5765B05E2E3AFDB38
+:107D00000EBE7E13D0F95F5B0CBE35CB572BDF5612
+:107D1000EE18CDE2F1ED5FDD7E16976FE1795CBE86
+:107D20007547E2111AFBFAE4EBC25EE4ABE28ED1D6
+:107D30000792302FF783A7165D4C7E060B5E0DB9B8
+:107D40006A95978F246AFCFE8298BC3ABE9F47F2E0
+:107D50001D39FE0C7AAC7A7A318DD343B7065D1AA1
+:107D600074DB4B9E96158FD6F72FA23C1A10EBCFE3
+:107D7000084E620578AF5EA39D15A0FF392827F84D
+:107D80001FCF8E93D7C1EA86A29ED1E8CE8E9B9F4D
+:107D9000EB77FBD08CC573654ABC78B7BF4C8EAB14
+:107DA000C797B8B95CD98BB40065B59BE3AD49C43E
+:107DB00057C012A4BC7FF429123F257B899F6CF029
+:107DC0009CD1B94A3F9DDBF627CA1F69A08255B8EE
+:107DD000B5292AFA538BE5A5B9505FE82EE6F5F1EF
+:107DE000F2CE1CA8DFE62EE1F5CBE4621B90E61391
+:107DF0006CF494C950AF31E6392FC9E4DF50E51374
+:107E00000F62DC457D9EDF17B70EF8DA591489F74B
+:107E1000263A58D05584F7344209F555D9BF5F85C5
+:107E200046E00647E01A37C9A3491AE2F594CF495C
+:107E3000F932773C7715E56756BBB9DF78F8CEF1B4
+:107E400074FFEED730FECDEE01BD8FDF64E3FD9C05
+:107E5000DA31BC0CF13AFC62467E0803FF45AA46C3
+:107E6000CF5D2D78F494F83F03CF7F3426DBA99FB4
+:107E7000EA9EF53ABFB251E43528899C0E9424B9A4
+:107E8000EE5928978AF5BF43E0037FD05EEEDA3BD8
+:107E9000F0317EDF53F7105C5F4539F347D41BBBED
+:107EA000FF35D18FE757DE4CE0F8BA2169BDED52BE
+:107EB000A81739872C45A27E53DAF65D2CBFED0951
+:107EC000FC90E39F85B1BF9B6E56787FEE3A0FDE44
+:107ED0009F26E95C8F96806866031E1A75A6D97383
+:107EE0009145CDF9168A52D41DA6713DA671591639
+:107EF000EC83B04E378CE5EB0438A57DF18D31BCB9
+:107F00003E2B94D3D8A1111CF7201CA31CA18BD00D
+:107F1000FEB909D4224ED766FBDB88D3D7FE4526AF
+:107F20003BB356D21ADD50DFF91623B9DC99E015C0
+:107F3000F907FCDE19C32F31F6A5B965B864257BB6
+:107F400016F13C0EE18732E2E86759AB829389F182
+:107F5000535BE4E178B69EE4647FF1B19FBB457C5E
+:107F60006C101B7481F1B167DCE7111FBBC86DE8B1
+:107F7000F322DE2EF6FF334772285F485531278FF4
+:107F800031BBA6508A88F1DD2E8BFC35E878C451D0
+:107F9000DFAD88971147D92DDC5EEA253FE224A3A7
+:107FA000BCE6511D05941F61B3E6471C9329E1A966
+:107FB000F4C5620DF1D924E2C6171AB737E2FEC53F
+:107FC000FC514C1CFF796F39C5418B7DF1E3F8E31F
+:107FD00094D914776047F8FA19717CA6142A08E737
+:107FE000D930D86008E751F3DF01B93C2DA8505AC9
+:107FF000CD5BE6E7E32C74605DEFBF58D7FB7CF305
+:1080000020DEE7F7AA8D6223290FC226F2207EC95F
+:1080100002F747E7411878EC2FCFC49A5762CD2377
+:10802000C90C98F134B8F252D3FB8BEA8A4CF58B29
+:10803000978D33B5CF868D30BA9EBB669AA97D7E6B
+:10804000F34C537DE8C69B4CED8785E69ADE0FDF47
+:108050005AD5E7BA8F6859627AAFC8A162BC0FD20D
+:1080600058F7CBF6FC202E5D18EB6EE46961BA116F
+:10807000E27734ACFBC3D9E43F2A93B4D8F5F78751
+:1080800083B42F5FE8FAE77B843E7481FC3E0A8963
+:108090000DE3443AD713BB6CEE35A81727036C28C1
+:1080A0006FADFA4572EB0BFF2D79E3E55B682B9022
+:1080B0008EBEAFE86371BF1F20F2239B64719E7474
+:1080C0009293F4817B64F996E87BE4AFF0703972A7
+:1080D0008587FB557E02FB26EE9383135990F64F5E
+:1080E00071BE9CA1430AE6EB4D65E2FCF963AB2649
+:1080F0004FC078664781968C2205EADF88C8FD9BD1
+:108100001C5A23C60346295C8E837C9FE6198DFB8F
+:10811000CE721BD77F8236C4F360270B7A8B68DF61
+:10812000A3B866324B939614A2E9D5B3BF685F003B
+:10813000311CAC1A9E8476D0CB383406699D09B4C4
+:10814000FFDF68C8BDCA6124F7CEB87BEEB5A0F3E7
+:108150008E67E6E5D2F3E33703D701FF1CB79BED4B
+:10816000A2FEFC53959BEFF7A0FFFF780133E519C2
+:10817000547BB81D55ED5178BC3CF49774444BD7F3
+:10818000FCCF2E41A06BA5F65528A2576FBCBD822F
+:10819000F27677CD08A2FFCFF03B1BFDD4B64E643C
+:1081A0003DF707433F37BCC1FD5F377C66F6E7DE2E
+:1081B000E9E179D7778AF1AE87C20778BB1EEFF481
+:1081C000C6F2850953901FE0795882FAB7DB40F573
+:1081D00003BA9F11C8B6213CBF67FED7764B98AF54
+:1081E000ADD1F7D7B10A1BC2F5FACD8B3DD8AEA7FA
+:1081F0003FA39FC178A613F6E9E4A02D1DE8A7FBD5
+:108200001B12EDEB309E139F57CC1EBC12B70E63B2
+:10821000BCD759E0F46BB0DE33999FFA35FA672C7E
+:10822000C1240777542EFA536A0ECA3F99FC1F4B9C
+:10823000F63A48FE75559DDBFE20BCBF6570C7450C
+:10824000A85FBC59F5D92588971B372A4C83F50FB1
+:108250002504EEF344E1EDF8BC8F3CF81EF484C72E
+:108260001FC44DFE69079DF37AB3EAE94BA2F5EA14
+:108270004D9E893FF6E03E39E6FCE23D654F0D2319
+:108280007BDBA0AFDB047D2D797228E9834B3CE6D4
+:108290007B53963C9E4BE7894A2516D78EC47B3F7D
+:1082A000302F7D07D0159E23DCF729CF1FDF7924DF
+:1082B000A598CEA3B2C07684CF68BFF3E59B865362
+:1082C0005EE7B1B4F3BB1719E00BA27EC5389C2F53
+:1082D00009FE98D59A5A2CF4BBE7106F37FDFAC9FE
+:1082E000D37F40FCEC7DFAF13BB14DC9F9E18389C4
+:1082F0007DCC2FF000FB18D93F5D2CC1EF8863FFC8
+:108300003C2BF4AFEFCB3AD925E7E40A91BFCEED91
+:108310001045F667601E774BAB928878F3A2C16276
+:10832000C817D009BD78FFA2B83FDD09F6D9702182
+:108330007FDA3D1F4F69E27108935E5772A8CAA4A5
+:10834000CF55C03F94F7976F0A34E23D8DBDEA7573
+:108350006199ECE12FABDFBDF325E57DA787F37FC6
+:108360004B0197DF2DE18410B71B5831EA7BCFE03A
+:108370005CE0FDB464BE2FD8A5CE0227FC7EC6F318
+:10838000C9AA3559B0DC791C1F58C7BFD3C3DA3826
+:108390009DF6E87F872EE57F674E9C032E11E7A2AE
+:1083A00063EC49E02BBEC92698F4C7F0E1BFD13990
+:1083B00097ED29DAEFC6A33E0F7A0AF2BD4BEDB076
+:1083C00027C799DF2F517E027D8FF572FBC4B987D5
+:1083D000C7E19C9A4EF79EB97CBE51682F19ED4FAC
+:1083E00089FD66F1E13787D8619D4ECB47BC1847C0
+:1083F000A8DEBDC38B66F2658981242FC64B8EBF74
+:108400005AEAA37CABCD43D0AE6D09F3F8C408950E
+:1084100005D538F735D76E2CA64BBF6B36A652392B
+:108420000CFD09F0A836CCE7D9B9A731259EBD5D72
+:10843000FB1F7B07E1BA3D3D809F971AD15ABC10C4
+:10844000E51FC2620339F7D4A7C3A9BF4BBCD93417
+:108450003F185FC5E7209164BCEFE86961AF757EA6
+:10846000AA503BA3DF117B262A3E58CBC270F301F2
+:10847000B20F5B1D1AAEB36B0BBF0FCED5EA22B99C
+:1084800057BB6F2AB7E39279DC737B42F71FC5397C
+:1084900036FABB042E5F334B81FEB7DBF9FE380C96
+:1084A0001860873BF2DC18CFD5FA634A6A77E6F1A9
+:1084B0007BF55C6A33FB863B1AEF1EC2FB542FA789
+:1084C000ABED096119F376BA81261F23B822703209
+:1084D0001AD7807318E9F3DBEDDDEFE2F94B3A5F71
+:1084E000A7211C1C4ED63A5443BDC2E5E3F15B976D
+:1084F0004FF307A558B86A47829E0BFC764F038B53
+:10850000FC7D04CC634B88D49DC013DB739890072B
+:10851000C3564FCE8AAE83401A13F97EF63DC35739
+:10852000374D203B27A8A05D0FA52705E7C9F737E2
+:10853000BCBF604011C703FA89139DFC7D4F7B27A8
+:10854000BFB24475F376FE245FE23489F5DC676AD6
+:10855000F89DEE90C2EF5E89FEADF081911AC05297
+:10856000FDC2F344B78BE4D6074768782E31B000DC
+:10857000E9F5576FC90CEF47FAE049179D432E788C
+:108580006E33F9ABADFDAD3ED6701FE665773D2786
+:10859000699807DA65EBA6B8514DEB7B745E71EA1A
+:1085A0009E13746E4B490AD47947635EC48A32C401
+:1085B000DF58D6DC88FE3D908714A76FC9E0F2E350
+:1085C000CCD14B1E5B1185EF07BDC2BFDB1DB818B8
+:1085D000F9A655F0E73ED46FA0DC2DF4ACDDFB6FBF
+:1085E000CC8D3E87156407C81FD6C00E517EA1F101
+:1085F000BC2BA4D239B0E1AF3B6FD1A3E8AD59F0A9
+:108600007BB3182F3F29B08AF876FF9FED5E0DF3FC
+:10861000585B86A0DC6D013DACAF7CC65A0BDFF425
+:10862000E4B79CE4F771C3BA3625C13A3DFDFA9E22
+:108630004BF1EF8B00FC8CEEAB3AEE20B9B93B9BD3
+:10864000F3DF8AD73E198972EB93BD8B2E467C2DC2
+:10865000F3DA0C3A9F9480FCF42C233966F0632102
+:10866000F2A384F742713F4A21D239F29FBD7D1AAD
+:10867000F1DF6E7E2F04D039D13DD0B90FF58B429A
+:108680001FD03D7D3F94F8797BBBCCCF81831CCF3D
+:10869000A7FA24CA57D9DE3ED947FC2C036A8B902F
+:1086A0002FC307A89F16FADB75ACC4729FEB294C49
+:1086B000D21810918F7FF3703E6D29D092FC309FBD
+:1086C000444531F141D43EC9EB621F957F74D3EA32
+:1086D0000DF8F7C3DAC5BE20F4AE7D42CF65C7B84A
+:1086E000BC5F2AF6B225BF19F7ED6D30DF252F29C3
+:1086F0005CFE0B3A3920F4E043F51954C7FD428380
+:10870000751A0D25DE0754AAD7E19F2F6163CA9B16
+:108710000F6239AEA2A50C8F4C4D98D57E909F610B
+:10872000D38723FDED3A70F570CADF3DEE6098A265
+:10873000B8EB6FDD7F7C0AF351F701FEE3EC4BE809
+:108740009F6514BFA9207AEC8D6EBAA48E6BC6FB10
+:10875000410FBCA77AAA0A1B7D0D1206E0E3F57B48
+:10876000AA56E3BD803725E9C7911E97FB02C79142
+:108770008FBA5EF95B3ACAF4DD47FFEC4579BFCBAF
+:10878000AE0F473ADB9503F6401CFA3C2CE8A7A451
+:1087900097BC8ACFBCDC5EBA24C8D621FDD4EC528B
+:1087A000E8EF169CDEA5E8780EFB5D3D908E7ACE54
+:1087B0004916BC7E3CEEEFC2AE9DCFD1CEE6A3DE25
+:1087C0003292EECB30D9994C592ED33DEFAD12F900
+:1087D000272A2D7A48356B5E3518F78DD6CD769CD5
+:1087E00047D516F3F7D5A8BF8CC4B26F7BF533AF6E
+:1087F000D05F72592EEA2F403FE49FE87E4DF13F53
+:10880000C628BFA70DF37B9E96397E405E121F1AC5
+:108810007ACC569F7E1AF5CAD3824EB70B7BB47BB7
+:10882000BB44F9FDC3B6F2BCEB7127B5CD8CCF9F2D
+:10883000F2C22A851C1CA7F2F8C5B8A3B9140F1DF3
+:10884000A333F2872C68954288C74A43AF13E729C0
+:1088500060DB25BD6E2C0B35E2FD720BB74A740E42
+:1088600063D156B3FFBE7AE32B87D13C5CDC62391F
+:108870001F2FF0628D6FECC05FE2C4372E4E12FEE8
+:108880009C216C88E9BC55DBF99DB7FAAB387FFDBC
+:10889000AAE8DF68372189D34D8D986F754809891B
+:1088A000BF4FE9C6FCDB5B057DDC2AE8A39685EDBE
+:1088B00098BFBF78039F2F5B6F33DD5BBC60D7ED44
+:1088C000741EC14A4795DB78DC0D1048F19DCA4DF6
+:1088D000E6F755021F55167CD404240B5C5CDF8E32
+:1088E00085ABE57A5CDFC5DB6CF4F739AC709D6570
+:1088F000B3298FE81F0D9F759DAE33D6E95276A937
+:10890000699DCAFBBE9F2062DF98F5DF670F5F4A53
+:10891000F92E67DA72C87F60D087B59F29427F9EA3
+:10892000BA91EB99A7F794258E40BBE888EA97A007
+:108930009FE2973EF6E2798FA2BD0AC3B860576BFB
+:10894000F13A3CA7BDB32DEF5ABC8FA2E82595F6AE
+:108950008DE2978AE85E90A2978A1273298F424B24
+:10896000457C403FB4EF761DC9FB7D21CACFB6C917
+:108970002588E615478A12513FD8C9B83F427AA9DF
+:1089800024B5236A1F599CC4FD03AB32DEB907F539
+:10899000F7A9CFDAE8BCC9545BF7CB987FB0B34DE9
+:1089A000F5AF807AF54B731BF09E8AEA27253FAA24
+:1089B000D987DB97A47D07E9ACD5E67310BCDF3D12
+:1089C00080EF83DB247F3EB4AFDD7BD5F0ED98E70D
+:1089D000BDB9D81F7D2EBB2859BB1FF32A5966226B
+:1089E000D9DF532FB2D17E7A6A50E2CFE83E167DAE
+:1089F000F31494B3A79EDF69A77383DB2596011355
+:108A0000399C71F019BADFE397AF50BE42D9AE5727
+:108A1000283FA137797F3AA4B030D9DDCD742FCC6F
+:108A2000E2CD46BD83CE415408BDA966CB09AA5705
+:108A3000A1FE0FE3556D52421AFC7A70EFAF28BFCA
+:108A4000A1661BCF6F80F7247FAA307EAA45E87C01
+:108A50002EE3743057C89F458CDF33B4A8999FA389
+:108A600033EE4532E87CFEB639948716936F86F66E
+:108A700025C5219A89BE63EF1BE2F46DBD77C84A14
+:108A8000DF2D067D0F63C390BE3F99C8F3C33E79C7
+:108A90002521B110E6F3C98B0AE5DDF741E7B49F64
+:108AA0001E11FBFF99B04CFB93D1AE73CF47B48F2F
+:108AB000D41E3963477D754AEB87B40ED35BF74FFD
+:108AC000463C7F8B05AA116FDF6A4DF4219F4FEF63
+:108AD000E0726B5AAB23847EEA6FB196265CDFAE00
+:108AE0007D3F6F4A417A7982D38B21CF160A7C2E43
+:108AF00014F85CA8F2FB9EAA0AF73F88F9D0D318B5
+:108B00009737D35A84BCD964C66F97AD4525BA1937
+:108B100021B1E6ECD8FD6E11EBA0738F5D99C3E92E
+:108B2000EF4906C15E453DAC7A9B350ECEEDFA1A93
+:108B3000CB7E7A30C9F6A5EEC178C7B22ED3BBF989
+:108B40007E360DE809E3216DE18642947B067EAC1A
+:108B5000EBD2A6E526F575DEF965A1B71BF56F8B9F
+:108B60007B265A7CCDEE683BBCDCC7F5F0AAB14A47
+:108B700010D7B5C75EC93B38529323F60AD8299F50
+:108B8000250DE076CB28E8FA852C85A5A545EC9542
+:108B9000D519F74F2F4AC3FB23B8BCE81C03FD616E
+:108BA000BE80CA484ED56E7384D0CEF81F84BFB83D
+:108BB000BB008000000000001F8B080000000000C8
+:108BC000000B8D576D6C53E7153EF7C31F8913FBE0
+:108BD0009A78662C34BB31F9202584DB109A40D773
+:108BE000F626A51D83141C58296AABE2B65BD90A88
+:108BF0004E5085281295B889A9D6956942DA7E54D7
+:108C0000EA56DD226D621BAB4C096A9892C8A1A19D
+:108C100025E990A0401BD0D659FC60EB9490C0345D
+:108C2000D24D95D873DE7B8D1D12B43A528EDFAFD4
+:108C3000F39EF39CE77DDED75D7DFFF29AF544DF7E
+:108C4000EDBFEECDC2C6FBA54709B63A94F069DF89
+:108C500020EA20F2449A60FB242343B0ABAF7B139D
+:108C6000254423558B4209CCBBA1EAF335B46FF1FF
+:108C7000E7E1BCEDFA52212A23EA84D5CBF2FD9D2F
+:108C80006AD6CBF33BFB25D386ED3DF99F8ACA52CA
+:108C9000A2C981E98AE760576832FE71FFF796A89A
+:108CA000D877EA928F6295D8D8322FD0FD442F9290
+:108CB000F3D9A611ED9987F6F04BEDD4800E697FBC
+:108CC00039B5C0AF878C0CD6755E540C4B47FF0985
+:108CD0000F513351F7277F1A9E1721BAF6AE64F869
+:108CE0007467FDAB8D683F6FEF9F87F9377F27195A
+:108CF00016A6BFF84DA287D0BFED4DCF95ACDFD9FA
+:108D0000EB96F89FBEB217F39247FCFA1B687553B7
+:108D10004F39616E0FED1736493FBBAE04E1AF2FFF
+:108D2000E5655CC82E581F23DA7E78A6BF24A9F912
+:108D300036F2DBF397D68EE182F1355A69E46A00A8
+:108D40005FEAA8EE96C2F1171F90B0FFE488A2F97F
+:108D50002481DBDBDF2AC4E734C058C0FD4526216F
+:108D6000CFC973257611E6FD731FC66A89C6F7C1A0
+:108D7000B90F7E5A148187BCD2B14B06DF8F713D8B
+:108D800019FFC452A23F0CBE7F2FF30109883A6C31
+:108D90003F8C798B0BE24E23A88238119791C17ECC
+:108DA0005D9F2A06DC735C35DE483EAEE36A3668BA
+:108DB00014F0637A9FD9315C8D72492745BD64698F
+:108DC00058D8DBBC39A1C4EDFA7C1BF96C35B1FE77
+:108DD000299717A44E45E388F3590D45043FBBFB83
+:108DE0009DFACA038EC5FE9B8971419BF79F35DEB4
+:108DF00066EDE0F19B9501B218B72FAD766EEF8E60
+:108E000029F406DABB3F79A9960AF6278E13F5ED09
+:108E1000F24C4599B75DE764115FD7B91BD12AB40D
+:108E2000D7D23BAB35B4D7517A3F8F7F180BFC8834
+:108E3000796DF1BEF3F37EBE0829225EE27CE1CFBC
+:108E4000A25F3A7EDD7C7B68A3C0A1C7E5D50B217C
+:108E500059CC7F554BBCC2E770F2DC7FA3489B8E98
+:108E60005FB812E47AE5EA7DE7B9BB1D3776E0F535
+:108E7000375BF5F34F83078D23AA15429EC7C68A39
+:108E8000EC76C66560DBDFF672DD2EFB88CFC3EEC5
+:108E9000C16DB5C47E138965719CC39B833F5EC65B
+:108EA0003890D423E2B2383EC435D17731AAA33FFB
+:108EB000397031CAE3C9E32B7E6161FEF2338DEB79
+:108EC000B8FFD86955F0AFF14C93E0DFB13F37956B
+:108ED0002DE2C0C908B0DFE4881A677C92234D1FD9
+:108EE000B7635EF24C5B93C4DB9C692A63FD592E29
+:108EF000513C8D7169A44AB473F9FC5C73F09B1CFE
+:108F0000021FD02F51CCE10F55CDE0CF8EDE535E46
+:108F1000CE63479F6216F228B7EE90A60A3FBF6560
+:108F2000FE804FDD69C914FC38EAD81D7DC7447E38
+:108F3000DB3D6951EFEE231E67FC8F8E253A28D664
+:108F40005934CF623C3EE62ED461ADD75E480871FD
+:108F5000B492B6A4E7D0C39AB024D68D5E4A7C9B67
+:108F6000F932DA9AA8D5EA67CFB3A84DE443928BD9
+:108F700077AF678D3D87BF2AF6873C8265B4353E63
+:108F8000C77838ECF067AD971273C5F379EE3C11F2
+:108F90001D90C18BF3ED1E8DF94F64962C80CEAEE3
+:108FA000777576D3E31ED3BB0CE3A49D2AC2F8FAEF
+:108FB0009CDEB640CFA00B71FCB1BEC5DF8C873202
+:108FC00080B4C39CA9731B29EEA145F0B36666FF6C
+:108FD00013AC970D6C55E1E76E3AF829EBE0127C83
+:108FE000A9A11AD641524A021278F3EFD31E4D11AD
+:108FF000F1DA55AC0777E697D3990FA17F3AF4EFF2
+:1090000034F48F6D77DD670D59E0313A74E9DDB0E6
+:10901000D0CF228A3101BF8277E49DD4DCBDEFF04E
+:10902000D77DFB7C7E7F06DF72F5998064A7EB67B6
+:10903000D7E786E6D421E91FF782ACD4453B5F979A
+:109040009147BDE2F0CFE74998E5C8C3D3D79A2945
+:10905000673DAD838A22BF8947259B751E7156F8EF
+:109060000A747E628124C6776F966C0B5F87EA3E36
+:1090700013F7763273D6CB7CAAE97DEE35716E2D6F
+:10908000BA40D17C1D37F89DFBF276FD72F9F2A053
+:10909000CEF981CF428F23C2F27CBE1FD7BBF7E14E
+:1090A000869699F5ABA5B38F95238E274DC9B0E76A
+:1090B000AAFB96FB4EB1DC7DDDBA2F09272261E0C9
+:1090C0003179F6C6E6A5F0375AF7F70ABE473BEF07
+:1090D000C2DF0A97DF5D81600385A02EB57A2A0B77
+:1090E0003CDE2B4DDC13669D90BF0ADE4BBC3EFB85
+:1090F000F6CB12D78304DE773B2F55AEBFAAB0E67E
+:10910000E874849633AF7EAF69CEB9F5D80B590FAA
+:10911000A81E8F9995FF5F77BB4F7CD4C075B93679
+:1091200034D2E02DA8DFF8CB38F77C8F0C7C10D53B
+:109130004B0AF925BBFC528595A48DEEFD38936F43
+:10914000E3CC37AEF7D10FD63FCD3CE9DD1491F437
+:1091500082FBF3F8F9607581DF897E45CC27355BAA
+:10916000F34469619CAF893827D28E3FA26CCDA6AB
+:10917000A585E32997B759C1DB9F2CDE19E7739CBE
+:10918000E3AD4A0E6F3BFB3A48DC476EDE692FBE0B
+:10919000202E6BD067FF06E3939EA98A70C1B9F8B1
+:1091A000A18B737346127C5C4996C27E9BE1F119D8
+:1091B0006EAB9451611FA08CE8275A48CCE3FB5D4D
+:1091C0001E37AB9921A941CCB354F072159D15F30C
+:1091D0001EA229614D82C0C3B691216C8B3FB38E14
+:1091E000E5A33E9D56984F99A81ABE0A3EB294CC6C
+:1091F00055BF7CFE2A5DCDF11393F1B8D91A9F4378
+:10920000AF0FBAE7DCE0B71AD77982EC43E87A907F
+:10921000B20A6FF2804A6B14E4F3A04AFE62C47B88
+:10922000745816E77730ABDBAC5F4699BBEE0BACFE
+:1092300043BBD974CE295F35CF34E6F3BD138755D0
+:10924000F017E2792ABDEE113866C47E0F73E0C8CC
+:10925000BB957495DBA970A5C3679A7A96F779A434
+:10926000DF27DE39B2DF1278FC34ECD433003C83E4
+:10927000F0B3EAA04463D8D758E4E49BF3BF0AAF45
+:10928000BE5023CF77EE31B4690CFD01BFB38E68B9
+:10929000B5C6784999A87C2BF0F5719D8C92883BD6
+:1092A000F8C2D4B5BDE2DDE6D30E2124A3FFA3317D
+:1092B00009EF69C934690FC7E32FC9F0FB1AEC182D
+:1092C0002F7C57FF3AFCFC5B7CDE255D13785182D6
+:1092D000747E67CCA75F697C6FC83CAFCC81EF1F01
+:1092E000C0EF4957EF2E173BBA71D8DEA8CBA8C7FD
+:1092F0009688DFE07A34FA2B9613FC6E284D08BF6F
+:1093000097A523D5C2896AAF60BF399E07C86C6133
+:109310009C25B75E7BFC8EBFE922C7F299643E07AD
+:1093200020E77EC47500E7C28FB6D5E6D4DBFABC71
+:10933000C84E61BF69392EC8F88A62F805DF6389B3
+:10934000B16658B5CDD47796F0931D7904F279A41F
+:10935000781FDCC7F4033C1041865D9A934FAA4402
+:109360005ECCBF9752546CE07144BB4A1D9EEDFA2F
+:109370006B914D95B3E33BE94B9CE4FCA665636CB4
+:1093800054DCA33B9B59EF18A7EFE47092F3386DC0
+:10939000B163A9AC2E7019619DBECF67DF93C1BACE
+:1093A000A77C7635C79FC303051224D55C9C73F850
+:1093B000685C3FE6B189FAE5EA1FCBE374A0D8C147
+:1093C000073FDF1C1C74D471E9ECFCFF0753B7A7FF
+:1093D000EBB00E00000000000000000000000000E4
+:1093E0001F8B080000000000000B7BCBC7C0F0A360
+:1093F0001E81FDD0F8E8B89D17BF3CA9588601C171
+:10940000CEE7626008E160600805E2FD407C00880C
+:10941000E53919182280381288A703F93380B8007B
+:1094200088D3816A9B99191876B131301C04E213F4
+:10943000407C9E8D74FB3F88333054C820F8C78031
+:10944000EC2372D4F5E3281EBC38CF0095BF4E1331
+:1094500095BF4D9B81E13D929AF59AA499AF6CC856
+:10946000C0A002C4003A4CE95968030000000000A3
+:1094700000000000000000001F8B0800000000003A
+:10948000000BED7D0B7854D5B9E8DA8FD9F39EEC5B
+:10949000494218421E3B2140800487102250B0935D
+:1094A00014142DB5113D2D7ABC3A8447906740AB1A
+:1094B000E9114F3624840001068A3572224E103499
+:1094C0005AA841F1D1536C878716ADED8DD656DB86
+:1094D000FA88A8A0A89C5445A7E7D472D7FFAFB5D7
+:1094E00093BD273301DBDE73EFF7DD9B7E75F1EF74
+:1094F000F5FED7FF5AFFFAD71A45B411F9EB849C51
+:10950000873F9AE68A849021FD2921B2D6E3809490
+:10951000E8E7475860725EBA18F82FA3ADB0CEDB0B
+:10952000FD1742B208F91ECFA37F21806770C018D3
+:109530008F9192A04262C5FDEDCC200CD644819C57
+:1095400017E0AB35DFE8A7DEE11B4FD208F9C2C94F
+:1095500052BD8A6695D3F44D67B4B1801087101E52
+:10956000C1C65377497529A69742DA2890B95D9EFE
+:1095700024E320EB08994493FDC34452D13FFEC439
+:109580007246DAD44048CCDE0FCB3209256BB78265
+:109590008E1FDA7D5F0857E0783C44067C281C1F4C
+:1095A00036122484CEEB88FFF2C03C3AFED6694ADC
+:1095B000D00E193B874165E233F038371F610787CA
+:1095C0002B89C6F11D6B1941EB398322D944A1A621
+:1095D000822A07292164EB94CF03613A1EA71C213C
+:1095E0002AA49EE4E3BB9A88BC9DBBC8C5CC3B7152
+:1095F0003D6458A349088A302F63BCDB6C745C99C6
+:10960000743D2689641F85B794CF4983F118F3729E
+:10961000A4E8A719F03A9A90CD0D0E4C9B26CF499D
+:1096200023508FF4CE85F5DD3A254BDC24F4973FAB
+:1096300032E539470F9D6F23AFD7AA1D7540796377
+:109640009D13F1B695E32744041CF7E652D7DC6876
+:10965000C9C07184880FF3B73A692598879744F792
+:1096600015400B3D6DF329EC9BAC966DD206D2CB29
+:109670008C523918A3E3F4783C413BCDF704587D74
+:10968000C7EB4254C3FA21CF305ADE65ACFF64B158
+:109690001F9FF4FF3E524D08E5475F4EEF6BD08FA2
+:1096A000FD757B3044BFBBFFFCE96BF369BBE46D28
+:1096B00021B80FFA25AB2CEB45F632BCDA54FA6F21
+:1096C0009AEF9AB668364CC1FDE5E3D580B78D4573
+:1096D000AB5D6B61AD8AD9FAA9F47FE70B69FB9AA0
+:1096E00062E9DF665EDF02204D2BEC1E39E7DB23EB
+:1096F000B4D4F4E1EEF19158062D2CDD88EB9DAA4F
+:109700005CFDEB132E3B6EEAB78D78334FB9E93F22
+:109710002E2597229F5FA0FE170DC1CB8EDB70DE3A
+:10972000A259DEA42ABF9ED3471F9D1550FA28C117
+:10973000F50C5C53DAFFFD25A00BE007BD12E51820
+:10974000F2229D6FF374D22BD1F5681AA968EB2829
+:109750001EECAA12137CACCF5EA02FF807AD6A2FC7
+:109760006AEE16C603F03D8B1C6C19FAAFC1D82007
+:10977000E34B5C87AF8ABF18E06F5C3FFEECA43A16
+:109780002D06EB5D1D40FC78F938364CBF5D8BD162
+:10979000F96CC8FE61E86D62C2E3A58CCFFAC6938E
+:1097A0001325E6FE0DFEBA4408BD08F89194E06B5F
+:1097B000618A0F325509EE4B322F596072A51FCFC7
+:1097C0000E99187802FA3DAC07AEF1E290AA1D2678
+:1097D0003CDB03CFFD19F0276792987B3C7E6F92AC
+:1097E000D3A9FCCA24BA3B0D5B9101FE332940FE8C
+:1097F000A4F9339432900B9707C3B49F661BEF4FC5
+:109800005D6B59D73FF375EDCFD703FF64C9B761DF
+:109810007BCD5E2E37D4461CDF80FA7E563F71BE6C
+:109820007F02393A09CAA99C7E1A03A06F1CC39A09
+:10983000671D01BC8FAEEB9A0F735409E2C190FF14
+:109840005401122847F5C39FA19E43AB46BCDB736E
+:1098500042248C78B3EAD3947239418F0EA02795B5
+:10986000C2461B85F0DF1C15F98D24EA6F9E8672B7
+:109870002F4A0F3626F0156D2AA99E291598BC256A
+:109880007A26CE5F36E880DB0736031D3B193FABF7
+:10989000BC5F05C643E5A19344B17137A57480BD93
+:1098A000A40EE173A1B298007423938D20E7EC21FC
+:1098B00091E80503FBDFCAF549AA796C9D925C0F1C
+:1098C000E40A4C0F489E3ABE1E37AAC067821E2685
+:1098D000E781DF4884EBBF20AEF786867AF20E9DE3
+:1098E0008CEBE89544A3F423E7D48542B49E04BCF2
+:1098F000484534F194B3540E6A66FAEA5B47B216EF
+:10990000DBB351B4C03C6D1EC73C321E52F51A4C3D
+:109910008BC72E04FEB0A55D5E0FA61CA59B4A0159
+:10992000FA7724A72BE2A14C3A0561AD3A697F7C16
+:10993000BD79B994F4D5471FC67C35A5DA3B906E46
+:109940005CE5AA00AC40C16E18CF503E9AA1E1E69A
+:1099500055E27858B7C8AC51747D86F6CC43FDE427
+:109960007DFDCA0F605EEB4BCA4E8009971654AF5F
+:10997000B99CAEA7AB980880EF8DD0D85468E1842D
+:109980005E097A1DFE994DC8FF109E09E91E463EEC
+:10999000567B53D464439E8883DA2FC279FBC0FA86
+:1099A00029E53331F10FEAF1D517672FDDC8FAD376
+:1099B000E9FF80EFFC09FA342D646A97007EACFD64
+:1099C0006C00BA41FCAEFA6FE94F253B1C1AD81D5A
+:1099D00045A21AA57DA711D54F653171CD9009E833
+:1099E0001335A75787E5BDD0BAAC276416CA51CA4C
+:1099F000B7663A6FE7722050D354D04CDB3D57EE38
+:109A000009821C184AC56646FAC0F96C4EB0B337D5
+:109A100097EC41F9D848E9A810ECFD1211EDA18DA1
+:109A2000458FA9667DF53343DE0CA00FA2C915282A
+:109A30003A08A1F8918AC49073FCDF4F1F8976D24F
+:109A4000C5D287FB46EB7A7CD5F5FA659FFD7D7123
+:109A5000F4F1F7F667AC6B2AB945D715EDEF166D43
+:109A6000CEA0F6CBC075DD81EBEA2A22A16472B8E4
+:109A70005B10ACFAC99C9AF507B9D5B25EB64BBF7C
+:109A800033F78141F0619B6B9DAFD1AEB35ED2DE07
+:109A9000053B5656511F19FB878DDA0E1DECF973E5
+:109AA0003984D97B91553101ECA022827610342083
+:109AB00052D8A985A29B0446FFB02E867D63A3E6FB
+:109AC00098B93F497559FB9FAB0BE6F13BEB151C71
+:109AD0008703FA03BEF4D00669BB520E8939D1FE62
+:109AE00064EB075DB17DFC9D17450706BD025A1961
+:109AF000BD5AEB3507CA48B2F51BD0DF75D6F1A6C3
+:109B0000944B89F53CB276CA648FA4AE2793532652
+:109B1000BB66789FFF4237ECB9A7056A173606BEC9
+:109B2000A3E3B8E13F54BFB6404AF59934AC8A8408
+:109B300035D0931AE3132D9DE9DF4EC1B20F37BE26
+:109B4000A71E07EB2FBE90D222C83559B3D8CB89B8
+:109B5000696343E06B32254A77FD0353E589D48876
+:109B60005D1B9A5B4DCB6F6CE89C0ADF8D723345B1
+:109B700063FF4DD5A6C93E96092DE7C0AFE4FC446E
+:109B8000F8A812CDA4DF1DA40BF3E957BE7E04D7BD
+:109B900001ED2ADA649DA861BB0A791ACB414350D2
+:109BA0008E4AF1A972316B0EE0CDB65008C7254739
+:109BB0001CAB29DF6D767258E3B09FC32A870B3840
+:109BC0004CF504C06E85C23475DA222AC22E0E17F7
+:109BD00070389DC37E0E177258D881F06685B5B770
+:109BE000498EB2F65D1CD6389CCE6195C3851C2685
+:109BF0007B58FF7606BB6C51D6BE9BC3051CCEE0DE
+:109C0000B09FC323382CEC4138D5FAB98A3A199E53
+:109C1000FAE442573F8CCA83E3B50F8E25C08C5EB1
+:109C200032044687F16F19741344F9483C79C86FC0
+:109C3000E31C6CBD1BF797A15F82703F8AE9FB09AB
+:109C4000D0C7E73AC5E060FCF5432E4F77829D4BC5
+:109C5000D3ED0D2AA6DB1A0268F76E69D0B85FA5AE
+:109C600018BF6F6C0822BCA16132A6EB1B42F8BD85
+:109C7000B16116C29D0DD5983ED83017D3BD0D6188
+:109C80004CF7342CC672D1863A8477537B17D2F6C0
+:109C9000061DD35D0D2D98DFD61041F891FD65CFDF
+:109CA00017513D7D2E2CA29E4F35FEA173AD7E90A7
+:109CB00021D556B9983E23DD92AF4ECBB6FA4DCAA8
+:109CC0000B2DB0A764AC0576159559DA73E44CB545
+:109CD000E42B99551658F65C6581C744E758E0D1E6
+:109CE0006D3758DA1B19A9B1E48F685962C92FD0B2
+:109CF000575BE0FCFA7FB194CFAD5B67C9DFE60C40
+:109D00003F235279357CF1264BB961E11DD67DDDCB
+:109D1000ECCC8B925BE4333DCBECCF4894F7521EF6
+:109D20000985506F31FDD208740B7EAF5C12DD27C0
+:109D300080FFEA8A13B0EFB01731BD33607F99D04E
+:109D40009EE279F0359DF653E93B11E831F11909AE
+:109D500098EA51B97F5264FBE64D77B17D75EB5DB2
+:109D6000C9F7D728D9E93C5ABF4CEEBFED11256E93
+:109D700007E9967D4AEB5D0296FF7BDB37F213DB4A
+:109D8000EDEF8FD25C85D90E891A7E51A267F5EF6F
+:109D9000776D3DFEF9B0EF31F6B912E7F3CAB9C1FC
+:109DA000B79B289FAC5709FA0DD77BAA08D815E7AF
+:109DB00054C6F7646F1EEEC78DF203C767B22B500F
+:109DC000FEB8AC7E5ACF1C942FEB3307B7CB94B8B8
+:109DD00084FE3B292E9018D53B8A5C3DAB808E4B90
+:109DE00079450AAE25A87F92EEEF09D981789012C5
+:109DF000EC9BA60509726F462ECEDB66C8B7CC2A4F
+:109E0000FCDEA40E3E2E3B8C0BC6C3C7658BBB315C
+:109E100095E24E1CEF947806C293E37E4C2F8D0F93
+:109E2000C7B4223E0CD349F1119896C70B309D1848
+:109E30001F87F5CAE263309D109F88DF83F1099880
+:109E40005E12FF1A7E1F1F9F826969FC1BF8BD24EA
+:109E50005E89E9B8F837F1FBD8F895988E895F8B61
+:109E6000DF8BE3D7603A3AFECF988E8A5F8FE9C8DE
+:109E7000F87C4C8BE2F3301D115F8AF50AE3B76082
+:109E80005A10BF15BF6BF15598E6C7EFC4342FFECB
+:109E90007D4C73E38D98E6C4D7623A3CBE19EB65FE
+:109EA000C737623A2CFE03FC1E886FC7342B7E2F07
+:109EB000A6FEF80398AFC63B304D8BFF08BFFBE210
+:109EC0000F63EA8D3F8EDF3DF18398BAE33FC5EF24
+:109ED000AEF84F3075C68FE17747FC08A6175A27B2
+:109EE00025C72AC7A54C97059EFC6EBA853E2A5EFB
+:109EF000B7CAF1F2570A2DF9652F5AE578F078992B
+:109F0000051E7F78AAA57CC9A12A0B3C76BF558E79
+:109F100017EFB5CAF151ED56395EB4D32AC70B5BC2
+:109F2000AD725C6BB2CAF1BC3556399E739B558ECF
+:109F3000672FB3CAEFC002ABFCCE22BBACFBEF195C
+:109F40007BAC7A6DDA2396F63CE58F25EC57A22898
+:109F5000675C25FF6EA9E7283A9A209F7526A7120D
+:109F6000FCE5801299F2F71DC415349FAB18693ACD
+:109F7000970719C07734CDE47C3704F88EA6E9DF63
+:109F80005C86E74C5F7CABE5174DB4B1F4E184F936
+:109F900005F44855887E6F1EC661FA45003897A0C3
+:109FA0009F80E8672AC12FD65CC0E07F934E55EAB8
+:109FB000CC7FCBF2C95996EF64F0238DBF5A0BF9D1
+:109FC000E969D1EC204D1FB12597D38F49ECBCED49
+:109FD000AC18EA90E87CFFA3B2E776F0A3FDD51EAB
+:109FE000DE27D1EFCB1CE17C704D7F6C0B3F2483CF
+:109FF0005C24A107E17B1A093D24A1BCB6FA451BEC
+:10A00000C1E0A6ED7C2656EF87FC8CAB17A35FCA98
+:10A010009877B377F0F14425A6979AFD04F78DFA67
+:10A0200011859F2311765E0329D583F7B87D21C85A
+:10A03000DF7044D963A7EB60CBC99A4FC6B36216F1
+:10A04000FD116B5E057AD8017A680448F92E4C3D03
+:10A05000A49B9D1B915E4C55A20A901AF3EF9B772F
+:10A060002E9B37C5C72F24DC1FD461F975EEAB27B3
+:10A07000C37C283E4EC0778A8FE7A521A9F141E035
+:10A0800064818E3FCFA0A2FD82C5FFF8BE10FE8D79
+:10A0900064F263E6D507713F794052111F06FEE86E
+:10A0A000DF6DE9863F86D5FB23F69BD09ECCCFC5DE
+:10A0B0007E23F1FEB93E34E8384324E1647ADD388A
+:10A0C000F7219D795FC99F2D28CC2E49ECC72657D3
+:10A0D000E379EA00B99799B0AFCF0CC3A250FD491C
+:10A0E000F56592714D57B87F4ACEBFA8F32BC35F79
+:10A0F00042F6E77DA5F32EA004286F901C399E87B9
+:10A100007090EBDF02B0EBA83D72EC8DA762CBA99B
+:10A110001CD85044752DFA2DACF6DC869888E7EBF8
+:10A12000057E2A706863F5DC0E90B93D68F42B3724
+:10A1300059FD299B6D7C7F7BD88AC7024AD0FF4E90
+:10A14000B7DCC493CFC6C7CF2D8D76F6F48DDF3A3A
+:10A150008E074AA83964C2676129251D18478C8D6E
+:10A1600023B17FC2CF170CFE913DDC6FA2E663BB2B
+:10A1700046BF89FD1069369E27A5C2EF807EBEE2EC
+:10A18000795D859CFCBC93AE0FE2696C8AF535CE97
+:10A19000EB0CF8D81BB578FEDDDC59837654738060
+:10A1A0009FB3FF85B60AED1092D45EDCCBF1BB897C
+:10A1B000EF17F746AA1C582F33DFB24E45DB67B8BE
+:10A1C000000F4D6A553AA4FB76B27223EFBECE154E
+:10A1D00066765B3AA49B8AD977D798BD0E567E8F58
+:10A1E0000AE9E612F6DD5D7AC8C1CA333F2DA9A798
+:10A1F0007FA673A022B55A14CA41FF92904C619772
+:10A200001A25E04776AB5D981AE3CE8E88E2185A9D
+:10A2100025BB33947E25F8DDEA4870241BAA03D6BB
+:10A2200039CA972FC7C8AFA7F9B4BD313B8F564283
+:10A230003DE7CEBD95576AFDE577F3FEC774465BF3
+:10A240000AA17C8EB5BD76DE9EB3B3EB04F89B29E4
+:10A250008EB13D237F17CFB7437E26521BD6974B37
+:10A26000DE8DC1798681E740B1D8087022BF1BED31
+:10A27000B4F171043BA3912AE867AE751C3F34C862
+:10A28000B29384A21E933CE0F9119EBF01F6FDB487
+:10A290003FB993F9518DFCADC63823AC7E23F70B43
+:10A2A00018781DC3E591413FA9E898E8A265FF46EB
+:10A2B000EA5D56B8CE64DF01BC38DB9A1F2EB4C20B
+:10A2C00073C75AE15099159E3CD5D2DE177D7E9416
+:10A2D000A813FD25DC8F62F85E76A935B8CFE9F7C3
+:10A2E000D3455C588EEF3B7278B987EB98BFA5D108
+:10A2F000C3F985FB5D9C5C2E3617B17D499F5DC11E
+:10A30000F1DDC5FD1A8F36B4B1F8940BD8C3EDBC9E
+:10A31000DE2E7EFED8C6FD323F04FCDB61BD985FB9
+:10A3200026C2FD325BC12F43D356F0CBD8813F9973
+:10A330005FA605FC32343DC0FD323F02BF0C851FD5
+:10A3400006BF0C4D1FE27E997DDC2FF300F86528D7
+:10A350007C7042F75CF0B775807F86C2F773FF8C24
+:10A360009FCBE58333A3D9E00F7B6466F27DB1DF39
+:10A37000C6FCEEB960A850FAB884048FA1BF9B8ACE
+:10A3800061F0774FAC0B362A9960B732BC4D0C07A1
+:10A390001B6DE560B73238DFC6F428E80BD01FE448
+:10A3A00030F327503ECB047C6FE1745976222CCCDD
+:10A3B000A3E3F8A3CCF5A2460218B7C0F902F24114
+:10A3C0009EBC21845E972741BB04C795BFB7AE0AE8
+:10A3D000C468F1D3D5475DB4DCA8AEE03A707D1611
+:10A3E00095A8E05920CE224D84F5395819443FDA1A
+:10A3F00096DF4AC13DD06626B1D0031D1BCABD31D0
+:10A40000063CCD4A0F97C477A3FDDB5C37270DE9E7
+:10A41000492383EEC7FD21EB3E286DB2D59FD5BC05
+:10A4200097B5938A6E8ADBADF6C4A89DD67D54732A
+:10A43000D19C41FDCF45ADD6FE0B9B12EA7B06AF0A
+:10A440009F1FBF1AEDFB54F43D4EAC49B34DEA8754
+:10A450003DF1CBB07CA27D2703A150BB4D3EAE6049
+:10A4600048957C5C0D815D2B1FD7781AE4DF431C77
+:10A47000AE66B0CAE220A83D986B1B82EB9370BE1B
+:10A480001D2270FE7C109501FDBFBE705D88D2DC80
+:10A49000C17F22B8DF78435E55A55378D76C8728F3
+:10A4A0005D02F4C6E21914BE5E194A746301D0C39A
+:10A4B000C322017A78A473703E1E10E7E009A17FE1
+:10A4C000A6A0492D03F59DAADECE2671563449BBC0
+:10A4D00053395F91E324D16E9E0AF35DDF34474523
+:10A4E0003D725D10F7074463E337E45C46FAE0EB46
+:10A4F000B7ABC17ABE964D92DBA16B6C9CDF8A999B
+:10A500007C34E83FE3C1C1DBDFC0DB8F770916FF96
+:10A51000CE90EBAA2B6D99B8DF097A408E7E293157
+:10A520003FD961169F66F05363D10E179437FACF67
+:10A53000CE89C1F684341F99C2E226287E713F7805
+:10A5400084CAF11294E368F73917D785989F3C8243
+:10A55000F10DCEBAA00EED481E462FB0DFE4E57136
+:10A560003C1BF78A1872D13897D9AD869C37E8A082
+:10A5700031C0FDEB7365E667FB0B9D9FB11F81FD4D
+:10A58000A15A87E77BCD93D87C6C992C0EC4561CBE
+:10A590008BC1D959B377D15A98AFBED0D0D73CEE42
+:10A5A00082B0B82B231E0FF003E7E0056DE3518E58
+:10A5B0001878FCB610AE073EB265EA4218E7D185BE
+:10A5C000ED1B784BC4FB77B93C1D9EC20F97A6309C
+:10A5D000B99EA1A85781BCDD7284D277927DBD93CC
+:10A5E00097EB88CDD90636A2C1AF46FE0149C37E9E
+:10A5F0000CB820AEB0B8BE9875FFF1FFBA1DFFA829
+:10A60000CD1A77F7FFEDF8FFDBED789A0F7648F873
+:10A6100002763CB7F3F7F6D16F829D5E2C1FC130F6
+:10A62000BA047B3EAB7846AC0AF23BBBBAD18E9FF4
+:10A630003CB81D4F12EC77C3AE37EC77C39E37ECB6
+:10A640007532D09EE7FAEF1BEB4232C48911D47FFA
+:10A65000E39ABFB14E87FE13FC1E12157366FF45C9
+:10A660002FF0F910133F78AC76C3C5CB0719F53F2F
+:10A6700009E65AE46B46F6E0768E11EFFD45AE61D1
+:10A68000AF87D83968513131DB634D548EFBE87C9C
+:10A69000DAE7B2F329C2E578B6E197290EFB47A3C2
+:10A6A0007CB7CADDF6C5353A9EA394133C7FF4E42B
+:10A6B0007485E07C3C6B6E04ED492A7F8B1593FC1E
+:10A6C0002D68AB4039A773FB32119F20EF0265D094
+:10A6D0004F829C21C19745C8CF85B36BE087A88086
+:10A6E000FA03E234C60F226F2E325EC3889FC8A3DE
+:10A6F0007F206736C86C7CE4696BFC3951297D5436
+:10A70000F4DBCDE4FDF98239EECFB06312EB51B941
+:10A71000A026937B6F08E16F2983D047A23F8A244C
+:10A72000C8692A8844E8BF60F62CF433F5F9A564BB
+:10A73000ABDC9603463CCB7FAFFCAE55FEC6B8F310
+:10A74000AFE8B7DBC8E5F3007E4E68472CE9223D51
+:10A7500049FAF79458F1EE2AB2DAF302085B881F3F
+:10A76000CEB19E93CB9EECE4E7003C3EB366B2B123
+:10A770006CDA77FF48F9E4961336BC4762E81DC3EC
+:10A780002F7B0BC469D2F5A981B84D4ACF0B48B5D0
+:10A790000F323F2622C6837D4C5EF64D34ADD37D0D
+:10A7A0008AC2FA69B19D847B42463CE2C20883FBBF
+:10A7B000F0DF668517913959701EB168A70D38888A
+:10A7C000DC42E4933DC6F8297F6F51587C752DA972
+:10A7D0006B0639B69EC773D7A84486F8C1E54FDD2E
+:10A7E00057318FC27BB9FFF60CC5BF66B28397782D
+:10A7F000A20A9C2BBC7368E277BE46A07EB4391BCC
+:10A80000E208A9BD0A718489789FDF621DDF85C6D1
+:10A810009F385EE35E51AA71C89D4228D9FEE0319F
+:10A82000C51AEF76A1FB4EBF53347EDE6CBDEF74CC
+:10A83000A17A7F543492EC9ED485EAF5FC8DFDBD5F
+:10A8400097A2DE72478F027260A51C9E2514F6C780
+:10A850006B29B6EAD0708A0AF9E90931385A32957B
+:10A860006BB9C8722760637111E5668983B4779606
+:10A87000F3F12FF63FA0007F7EFCC8DB57C379CDF4
+:10A88000D29F4AC441E77576BF97C470DF11554027
+:10A890007F2D392431FF9B1CABB8D6247F315296D3
+:10A8A000E27BE9A35E8CAF58F2983D3A9BD65FF20B
+:10A8B000E43BE309C5C3D975BDCF0D87FDC42302B1
+:10A8C0008B27D47BC65F4BBF2F91C9CDD549E4A060
+:10A8D000646774FED14FDC73818E84CE233761BBF5
+:10A8E0005DDFB5D94D76FF7F2A36A31C9E33E90F75
+:10A8F0000BD191021B9FF99E8411C7F9D1C3021B92
+:10A90000DFD3B6A813C6D7D9A18469B9959D7F4274
+:10A91000BAFDC6A3077C8087954F4B16F9B2B25398
+:10A920008AD9C763FAB61DCFAF421E81CA911528D6
+:10A9300062687A6839C67DAFE8DAFC27C907F5ADE9
+:10A94000FC43F1128C015E5F9582B3017EFC211FF6
+:10A95000EC07CF74EFF3015E69BBF3144A57977DA0
+:10A9600066E233C2DA8FA70F6C8F5A380AD0D7CA83
+:10A97000AE8DACBF04FE3C03FF1836502F8CB55B88
+:10A98000EDFA73E4C50ADC877766248D93EFD30B69
+:10A990009C5F971E38B75BA7FD7EF4D887BB753ADE
+:10A9A000FE657FFD74F79D6057FECCA9829C59F926
+:10A9B000C86F7DC484F79976C6EF671F7EE8C15DD6
+:10A9C000945FCEFEDE8EFBD1B3CF9CCED3E8BCCF5E
+:10A9D0001EFC739646CBDFF6CCCCA18087DB9EF8BD
+:10A9E000C6D0C1F6E740AF51BB795DA3B8AEDAD3AC
+:10A9F000020BCA3FCCD384F53976E8581E8CF3E3BA
+:10AA0000D7EC780F7125FD565F06EBB51CE53EC00F
+:10AA10006B289E57ECDFF027697C327CEBC345B88E
+:10AA2000F34628DB0460BDAFFDF6F472486D410DBE
+:10AA3000DA23BD28B713EBAD7C85AEEB25A9D7F1A2
+:10AA40001CF98B02F85FB97F23EB37611D3F867FCE
+:10AA50004C19B88EF3ED56FD7E8E2CBB1F6DFD4359
+:10AA60001949E3A68C755CFEC43F0D6A0718F2E035
+:10AA700042F85DCCE3FF82F6D0AD76E0ABC7DC7A7E
+:10AA800080AD6F7436CD3B7BE05C1E186BEFDB7ADC
+:10AA90006F0239D9FB8C5D85FDFA92675E453E3BBE
+:10AAA000FBC44B8A86729278046A279C257D7FDDE1
+:10AAB0006037AC60B63059B9D71BB3FBFAD76945DC
+:10AAC000F49A599A0FBFBF8DDFA38CFE57448F5C59
+:10AAD000272459B703F6422697A343102FCB49B733
+:10AAE000A29658D753980CEBF8F6E54077A9D6D143
+:10AAF00098BF0AF3BFD4B49E7B19DF26965F41F955
+:10AB000013FC837DEB1A155E2549F8F46C875D868E
+:10AB100038DFB329CED9FBEEEF7E45FBEF217B8AF0
+:10AB2000FD3BC7C385F8FC42F3FBAAF8BB1B82BF01
+:10AB3000260DC4E3477F492EFF8FD999FF6C050985
+:10AB4000CFCA9606EA2F8984F4E105FDE36DEE9203
+:10AB500050AE7FD42945A16AA29C5891C24FF89269
+:10AB6000D1CFD347C6833CFBE8E84F385D32BA5FAC
+:10AB7000B1FF6D45E7FA206AD60729FC547FE4ED62
+:10AB8000AD3C9CBCBD95FBFF94B4BD3372E8BB30BB
+:10AB9000FE33DD36A2D326CE744949FDABCFDA6D44
+:10ABA000D638716FC56B69B49EE47369D075E3BA2A
+:10ABB000D0ABB09FD35FB611BC4F2B07DFB7D3FC30
+:10ABC00046AF4BDB44F1D5E85B847E48A3BDA604C9
+:10ABD0003CC9816A1DFC1C72667539B391A396FD50
+:10ABE000B04D152DE3A67A3607F4D09B134EDB60EB
+:10ABF0009E6F25D8836FC9A479286DEF2D5D08AEAF
+:10AC0000D592D1B7B5FDF01A896866FD67EF7D135F
+:10AC1000C6437EEE2470BE22FDCCA9833C59B9DB2D
+:10AC200019B5D3F91C7BE28B07016F67EFB713BB34
+:10AC3000295EBC56656D9C7EE28BDDFF45F34F437C
+:10AC400065DA7FED6E5A1EECF0FD6E0CDAFF8FC7F1
+:10AC5000D2C6132A9F6B7F7EE7D5205F6A41A6D2BA
+:10AC6000F2B58F0E45BBEED410069F3A901B85754A
+:10AC700059F6F8332B408F2CFDB19B80ABE0D813F5
+:10AC8000AFDE04F0D99F7B31BEF1ECCF4F5F067C85
+:10AC900040ED67CDACC76F31BF3340DB5D0A30CBD1
+:10ACA00017CE735907FB92A59052B9B1F4E934BCA1
+:10ACB000BF632A87F556DA7B6F0FA27F45CF1671E7
+:10ACC0008F13CB063E5CDA69ED4F73303FE84AA53F
+:10ACD00077112B1FC966FCDA8DF54A1D9C4E797ED3
+:10ACE000627DA3FC384761423BACFE0A3BA94B4660
+:10ACF000FF931D4CDF2FEDFC72B4B53D9D7F4FECF3
+:10AD0000877DFF9EC0EE9790834E8C235AA6C44643
+:10AD1000A5537E7D52218B816F97F962A3FCB4BF4E
+:10AD20009F7239B9CC4561FA3D9B8F03CA034C1C15
+:10AD30003D3F86F55DFE949300BD2FFFB917CF5FB1
+:10AD4000963FF9C5A97FA3DF3F7AC28DFE92E53F0A
+:10AD5000BF03D77BB93D7613F8517A0FDAC91E5A73
+:10AD6000FEA383CFE7811DF2912D96973EC8FE7C0E
+:10AD700079979D5F6AB0CE83EE0B8AEBE878F4EDAD
+:10AD80002CFEAC9EB8826B21AE041C0740C7AF3BC3
+:10AD9000D939213FB75DCDFD499F2CD0D270FC251C
+:10ADA000CCAFB59AFB0F567F4B1BEA378D03E243BE
+:10ADB000C94442EE50EA46839C95E2DF241A85E5B9
+:10ADC000F8084C8D7292CAFCD05226F3B7D9328360
+:10ADD000A4B604EAB17822E2B9AA8FCFFE275DE2D9
+:10ADE000D5F76A43A1BD790E664F6F7386563870EA
+:10ADF0003FE3C17BA1384F2A10F427D8BCBE10D83E
+:10AE0000BC12C7FB854DB7833CEF3FCF66E727F504
+:10AE1000B2F6AA06F33FC1E5D280F9333EFB444DBA
+:10AE2000473E33E6B1B9414579B2B12180E9868622
+:10AE300062A2615C7F106189E3C35EA21309EEC95F
+:10AE40006A6CAC764F7508FC56D026F83B254F1837
+:10AE5000E9CB1EA8C3BDBFC3C3FC94924727B51E50
+:10AE6000F487219EE0BC05F0A470586E9B8D78A5F8
+:10AE7000F5F1FB7267F86EC08B2367AC454E2999DC
+:10AE800065167800DE0CBA38F0DF8D3F82F8023F9D
+:10AE90008DC6EF4500DEE05E04C0FF07F0F70CC38F
+:10AEA000DF542AA3CCF8ABB2C029F1772FC55F6677
+:10AEB0003F5F25E2A19EC7A519FC948A7FE15E0948
+:10AEC0005C1AD8D1D086A9F13D3D855ECF7532B9E7
+:10AED000564FC2782E4654E65721993AC931F99314
+:10AEE0004840C7FB4C782F1AF23DCC8F68ACAFA41A
+:10AEF000CAA7ACF24F7B15E673C70B3611E4955425
+:10AF0000FF0079C7748E26CDAE766A88E720FA7581
+:10AF10001BB97E5DDFB79E56FED8DCA061BA85F313
+:10AF2000C936CE27DB61DDC13F1714714D5B671158
+:10AF3000D49F775398EDEF6396732B7FB02B06F178
+:10AF40000E2893344C6328BF5EB34747D27AEE1283
+:10AF500012027AF1BFF6FD28CE957405C01FEAE70C
+:10AF6000F823870BFDD7B377106C4C4F1189A511CF
+:10AF70001BEC9F12F1DB183CEA807D77AAF1640597
+:10AF8000757B1EED2FEB753BCAEFCC1BBB5EABA1F7
+:10AF9000F3F0B4BA713F991564F4E80986855AD381
+:10AFA000FA65A5B0FBEE735EE976D2F5F4401C2E8F
+:10AFB000A5C71D6D239C781E64EB0A801CDCEC6722
+:10AFC0007A469B4B7BBBB4BFDEE70E667FF9CAAD0A
+:10AFD000FC6FC863755A99858E0D799B3EC34AEF05
+:10AFE00086BCEDE993B7D5B9309E8C783BF26322ED
+:10AFF000FD37DA145DA0764A23D89260DFBD2DB00C
+:10B0000078DB817200E3513EE929D803EF05ACE318
+:10B0100071D03AE517D43BDCFF699CB71F20D52DD2
+:10B02000F07E4B0BA52302EFCC50FA2118AF538CC6
+:10B030006984D20FE393C9981AF439139C2726FF29
+:10B04000B954F49CC8EE6188A073884CF7811EF057
+:10B05000331D99E200BB50B6054F80FCEAF58A5DCE
+:10B060001097B0DE33C70171D482BF1CD7FD736F58
+:10B070004DFE60E729F01208D08DEA09929325FD74
+:10B08000F77525B58CC07EF280A71BCFFBCA9DA2A9
+:10B09000C59EDCE60C5FE534C1A5D03B5FB7AFE3EE
+:10B0A000FC93DFFBFD0EE77792A39322137F1BF146
+:10B0B000A144D349B189CFD78DBC9CC039E740FEAC
+:10B0C0004E21C7F6FD63E458637E14D7CD9628372A
+:10B0D00032A97CF760AA8B2A8CFF50D33F4F403AAD
+:10B0E0005B0AF8209E3D7DF6CBD70B078E33516E61
+:10B0F000F5EB230DFD55541FDD3319E4600A7D7413
+:10B10000E48DD1DF86F8A9779E9704B3BF6E717C7A
+:10B1100023EA83DAF814A2D1F1D6B4FD00D3456D49
+:10B120001D48F7EF47D7FB303EA685EDE7DE8FDA07
+:10B13000A25201D2ED7909FCFA84B5FF7E7B2396F9
+:10B1400023E07D31F5FB7E3BAB4FCA35B4A73FE131
+:10B1500073ACD9660FC139CDFB6DB4DE20F8AC817C
+:10B16000CD5012FB14DF0180987F52371AE49CC146
+:10B17000EF7728542E011EDEB427F5B32F77CEDCEF
+:10B180000E7CBDDC196A839478D22FEA3D8A77441D
+:10B190006AF722BEC3BE6B2C7E56E6C77C87DBC532
+:10B1A000C49122DFC7EBABC9F397B77EF8DC5D141F
+:10B1B0006A2E095713D3FE5A226C7FBDE2E94AFE7C
+:10B1C0002E081B4F12FA64F66CAB1DE5D002EE0F91
+:10B1D00032E8B59F5EC23E7E2FD4424FB7C4B7E37C
+:10B1E0007A0B9B4BEF9942F1F729A523F0CB099BF2
+:10B1F000A70F053E5ABBE96BDB6EA4ED7FF6A28478
+:10B20000DF17C79D58FE83BB82F7DC08F6FAAF6CE8
+:10B2100018DFF4D98999780EFB81CDEA47A871B17E
+:10B22000FDCD5B4E962E8A6FB6D8C78B5AE62BE0C3
+:10B230007F5C14DF8ADF17C1A10CDECFF8F078A5A0
+:10B240000CE73504CF47DFDA787AC63AD46765E889
+:10B25000C7AADD624F7A9FE42DA766913BB53DAD4D
+:10B26000D82EA1F65166166FCF243F6AE370F90419
+:10B27000D6472770DF601197237DE36BB759E4C889
+:10B2800007CEE47E92FFE89BDFD7908F06CEEF32A9
+:10B29000C65F46BF3D8CEFFAE773CF9464F3E99F36
+:10B2A000C7342CFF813F79FF591CCFA71A16931082
+:10B2B000954335765ACE03FDDFDA3C19F6D9EDFE1B
+:10B2C00074C134AFDAB6A524643EA76C9FA7D498A6
+:10B2D000DAED5F07DBB39545FDEB90E52233611DA9
+:10B2E000EE73568B2EDA5FCDE6E9E3C3B8CF66F294
+:10B2F000E41D5B300FE4EAE9B65B93F277962B61CD
+:10B300007DDAF8FA50BBB7DCB43EC6BA24D63FF5B6
+:10B3100046EDE777811FE05E66D4A4C2D780752B27
+:10B32000488EB7A08BE9975354CF86116FDA93AF4D
+:10B33000015D6F71631C676AFC8D23E1C1F097C2E8
+:10B340007EA5F6CE18D710E897201E6ADB181D5C84
+:10B35000086FFDFD723AA84C3E9F9BFAE8A09EE85C
+:10B3600094614F2A17A2833B89EE18641E7D7430C6
+:10B37000E659333FDEB449433A781FEC94D103D702
+:10B38000FFA4A2FBA6C239D02609CF994EBAF4ACCD
+:10B390001B183C01E4F3495FE4EAA9E5FDF02DFB4D
+:10B3A00046FAE699FA3DDD72AB2F999FF5A654F463
+:10B3B00053A493928AFF7DF4F38E2D79FCF2726789
+:10B3C000650DF0018924F7E71AA921BFA5344FDFE5
+:10B3D000BE13F4E9494FE1E7519AFBA833BC1CE8DE
+:10B3E000E20E511B3F4FE8DF7F0EB03F1B664D7FE3
+:10B3F0007724F80BABA7BF6B437B08DB23605716A2
+:10B40000F0B808F46F0C437D90785EBAC35590F4A1
+:10B410003C767D43DD4468973874A29AE3E008B334
+:10B42000A3FE9330BF97311FC51656E15E9A229056
+:10B430006AA0739B1C6E817BBCB640E604DD84D79A
+:10B44000888BF9BF9CC78FB714D0FACEF75E5461D2
+:10B45000D076DA0FF8D71C39F22766FFB42D93C5E2
+:10B46000279222D3F742884FA0B0659F4FC73BC8B1
+:10B470003EF5A702C383EEB5333F0FD125D07BD76E
+:10B480003B89F187F6F7EF8D3810B989E5FB8DEC34
+:10B490002696CFFD972B6B987F32715DAF3FBCA195
+:10B4A0001BEC99EB0F0FC3FB74D77B46BF07E70B71
+:10B4B0003F051F3ED0BB9FE9E5C47A8F733EFDE791
+:10B4C0000E51B7D175396EEB3DEA86F17E8FBDBF67
+:10B4D00078C36F8FDBDC34FDC32B276D104F7433C3
+:10B4E00004E8D079CD239AC28CE028D69F4FBABC0D
+:10B4F0000CEE1A32C76B6E8F6E55A1BD55EC9CF7E2
+:10B5000086DFBE3213D4276D6F3DA437BF48146861
+:10B510007FDE21AD995DBFE3ED1DA6ED89FDEDF563
+:10B52000E391DF2B941D88977E3C39106F069EF0C7
+:10B5300002478505CF686F1878EEC35BDADCABC8CD
+:10B54000F8D4FC72BD67D47BEC7E221B57229E3F51
+:10B55000832CCA6FCFB8422F03DFEC75857E03E9D9
+:10B5600032476F9E5C88F70F5F05BE5C2185F3B3A1
+:10B5700046E0BDC4D143E05D98EEE4E7AB897CFAD8
+:10B5800026F00BC475F338CB9BF8FC8E7DFFB41707
+:10B59000E3289F78350FD2E552CF96EF02BFFD52D8
+:10B5A00042FBFB9343A3078D477B93FB3BCEBA8CB7
+:10B5B0007759D8FC6EE676DCCD87DC517847F3E628
+:10B5C0007AC962FFDE5CCFE23888DC3DFE3A8B1D33
+:10B5D000D9C4E31D06B603FBCEC4768CF91DCDCBD2
+:10B5E0001E07FBC3FB27291AF81F8EBCF8C9EF6B97
+:10B5F00029ECCA75E0B9EC163FA7DF4A11D7FD7EEA
+:10B600007FC85D0A7EA74DE9419DCE73D3B3A44B9D
+:10B61000A4F8393AE6F628C4216E9D2EA2CF6A5BC3
+:10B62000FC814815D42B61EF15A9DC1EDDD67DB257
+:10B630000DE8F1F46B76F4F73BBD128E6393AD3AEF
+:10B640000FECF7F73A94A4EFE39DF7C82C8E58E877
+:10B65000C178B7F924E200B971A87BCE50188F2FBA
+:10B66000485420FFD3ED92C8EC64C3CF1193999F47
+:10B670005D97191CE2A9EA34C7AB6D9C3503E32939
+:10B6800016B4BE84F7297DE5C9DF87BAC4CDEED9EB
+:10B690007ABBD3AF04FC7A6788F8B69137D82B40D1
+:10B6A000BDFCEE2A05EB478441EBE7AF51AF04BC8C
+:10B6B000427D90FFF917597FB49BC53B6DE7FBE4D2
+:10B6C0000E5BB079066DA7638B5F80F530CA85DCB1
+:10B6D000CC9E393DC3F0DFB0B8F6BC22D509EFA44B
+:10B6E000E48590B989B73C82F1B77BA01CF36F2247
+:10B6F0001E3AC63C1983F3E34DA01B609D6D8C9EE2
+:10B70000366D11D09F49F1970DFAE2BDBBEDDF8494
+:10B7100079E4B7082AECBD699A74DCF51E07A3F337
+:10B72000D67B701F08EE516837AFFD37382E6F8A11
+:10B73000F9EEF130FA78EF02F491E1667E9BBCFA03
+:10B740006EBE4F8AE13B8911C013C0A172F63EA1C3
+:10B750001CD2CC7128FDFCC3F661749E2138DFAA8F
+:10B7600099AC44C10F20B674E07BC0F32376720518
+:10B770009D5FABD01D027ED12789FC1DAED09B8082
+:10B78000A7ADDB87623CDB06319487FE9D7F55F0D9
+:10B790007CEC68E8937BE13DDDDD9315E48BA32130
+:10B7A00076BFF5FE35851DB00FF7D657E13BBF518B
+:10B7B0005541C9D2584E5E180DE7836B4455A0E53C
+:10B7C00023D5C63D0315EF314C903EBDB218CECF08
+:10B7D0008689E04B22A705F63EC8FA35552AACEB20
+:10B7E0007A355330EF5BEE7033FDF2B2BFFA0E37AD
+:10B7F000C563E0AE1D2A35E3297F668C037FA1DE99
+:10B80000A268C63D7178572483AF4B46B7185BE4F6
+:10B8100043D8B3986E91B74D637ECA1F5C1566FE20
+:10B82000453893AC40FF22FF0BE0BA667268D358EC
+:10B8300017023BD72DC2F2D04E166D27A35C8C5554
+:10B84000D076F7F843BB519FCC74209E88DCD3069A
+:10B85000788ACECC0E425CEB8E29A35E82FB551912
+:10B86000277AE7801E8DE6BAFED001726ABDA2017A
+:10B870009F67AC3975237CF7077F782BA4194DBFE0
+:10B88000BB13F481BFE74F0DF87D9662F1EF65BC05
+:10B89000FEC197909F51AD58FC84BDFEEA5D809734
+:10B8A000DD2591488DC6BE87B2FAE771606DF72C31
+:10B8B00078F7FAF43562700FCFC779ED54A39B186F
+:10B8C000DECA41AF1978DB206A5DF02EB37EB50386
+:10B8D000E9A38874A3BC1A06A7C8234CF4FAFAC6D5
+:10B8E00055102791389E1F73BE853F785F12D60A88
+:10B8F000E25194612CAEFE60597700ECF82DFEE425
+:10B90000F109673DACBE3DC53DF5331E460F201223
+:10B91000DBCA300D9542EA217A1AA4398E10C4C7C9
+:10B920001E14B53F229DEF9034581F286FA3EB776C
+:10B93000E48533E81F3C12F90DA6CF7B8A8DF662B1
+:10B9400059F03E6EF9493C1FD9AA321AA96D61F22D
+:10B95000A236D0E380F38ADA12A2EEE1F4A61B78D5
+:10B96000067F17D75735D731BC6696103C6F059FB9
+:10B9700018BC579605E528FE325BD6AEC27524DDAD
+:10B98000FA085A6E2BB40BEBD32412D66E8F03F940
+:10B990003722E17923E5F75FC379624DEB503C6FC5
+:10B9A000876BEAD05E3AEF379DB7D741DB01FFDF07
+:10B9B000E91609EFB140D80BC0DA1A4ACB489FBD4F
+:10B9C00095C5B45DAD5C5537197460C831CA1A0BA2
+:10B9D000A8BE00BC2DD0F555407F271DEA0B300EC8
+:10B9E000F74EBB06F35FB0F3A93BC06E71077A5AFE
+:10B9F000403ED44E66E34D6FA5DFD1BED17E0DE54E
+:10BA00006B5BED1AEB8FE3AF9CD319C7C3423EEEDD
+:10BA100085ED6CDCAEDC6804E8B3760DC52BE485FF
+:10BA200019DD834BF3BC887C7502E6EFD5B3B0DD3E
+:10BA3000217313F82281FE8C79D5F079D5AC61F3AE
+:10BA4000229C9FE8B062D06E4D399BE702C2EA8B20
+:10BA5000F09DB6BF90CFA7467F12D3852D764BFBC6
+:10BA6000BB8BF776E37DB612451310CFEC9DCC3C33
+:10BA70003EAFBC26D65F5EC993882F526F1A2FFA4D
+:10BA8000454D30E5ABD3CF53C6A276AE90E74062CA
+:10BA90003AF97D05CF518A765AE7757AE3E8075A75
+:10BAA000C1FF79B782E71507C5E09BF9B80F553498
+:10BAB000267F82BF990D727A615310E4F8814A861D
+:10BAC000FFD3DF2251A0879127AAD301DF234F8420
+:10BAD000795A87E7D81421429FDCA3E3A35BA7161A
+:10BAE00001E4657CC48F16831CA0EB0CF660AE7974
+:10BAF000DC747C192D59551087943939BD4AC1A77A
+:10BB00007F13F24FEC9A03EFD8661EDF752BF433E8
+:10BB10008C98E643F3477947B0FB57C7692E94AB3F
+:10BB20003F7517AC472B7F8F7E248C2C1DD3E39061
+:10BB30006650FEDE9C0EE394C98CB27E79B0EFEEC7
+:10BB40008A092057F0EE4819A6315236506E98CA2D
+:10BB50008FE1E5752149B952AF66D997EFBBFBF28A
+:10BB600031B07FDF0A76621ABCE7A77E0AF1317A2C
+:10BB70005044BC6FB5C51C2599F05EB848C07ED94D
+:10BB800056FC3B11F86EEB211204FAC8A8FEABDD9F
+:10BB9000BC8EB51E3FCE5B56C866E0FFA3634ECD9C
+:10BBA00082758A1E11F13D89AA5F7876B9C11EFAA5
+:10BBB0003D8B3FE978BE0EF5F7ED794AD2F79AC989
+:10BBC00005ECC4C4F2E923E7A01F2F7FE7767C17BA
+:10BBD000B676961CBC8296CEDC595909768C564DA9
+:10BBE000A96B281D77FB84B5C084DA6C765EA5CD81
+:10BBF00062DFB5192CDDDCB07822ECDB239DB2B31B
+:10BC0000888E77EC46F66EDDE6924F1C616A979659
+:10BC1000573EE6F816FDFE6E39D582F4FBBBD33EE7
+:10BC200071C2F9CCFDE5551980CF432D56BB8EC0AE
+:10BC3000A36A741F546A8F84BC745CADBF25884F9F
+:10BC4000C91E6BABA1B0F494072C9C01FB9B8DAD7E
+:10BC50001D73814E17146378F280F97ECEF5C9FC0E
+:10BC6000FADE59705FA94027EC1C35720F0AE58592
+:10BC70005C6414E8DD2874BC3BD9FE2422879E0353
+:10BC8000B91C29092B50C59067AD236B1E0479F6AA
+:10BC900025B7EB48DD62BC0789FC2F813DD45B9959
+:10BCA0006CDF749DDB857475BAFDDA57C13FBDA0AA
+:10BCB0009ED9FBF9ED9F0AB81ED4EE1B46DBCF2FB1
+:10BCC000C7A72AC98235114729AC4F9148340DC600
+:10BCD000D345609F10A1FAC78C07A3DDBFB5FE76E0
+:10BCE0008F1DEB5F079BE749FDF3F1F0F9E405E9F0
+:10BCF0007C92E8E939BCDFEFDDF7E9912980FF3577
+:10BD00006C8B941F795B7098C691AF5FDC38AE8501
+:10BD1000F6283E1FF1B07B0BDEF21EBC679428DFD5
+:10BD2000C19C07BEDDED3E3B81EDEFADF27400CC72
+:10BD3000E92AF17B5E82BC2AB577E13DD0D603ECDF
+:10BD40005D74D87943BE40448DBD171B35DE2FAFDF
+:10BD5000837263BD1E15E8A075CCEFCA003F5BB8C7
+:10BD6000BDB0B084E07E75614E37DA0BF39BB8BD91
+:10BD700020079B41C8BADBFD6493C97E405309B6D6
+:10BD8000D04DDC5E30F43FD7DBB581EE16D4AB4D41
+:10BD9000EC7E6A9F9DA133BD9A1F607ABDB685F681
+:10BDA000A37162AE30DB254C8F6B3BB9FDC0F570E3
+:10BDB00006EF37B385E9AB0CB0237C107EA0A35E01
+:10BDC000C6B3BCAC7EBB654809D39719AD0751AF6C
+:10BDD0007583D36508C80DA62F735F7A45073405B0
+:10BDE000E8E7362AA77FEA667234A052FB2CBDDF53
+:10BDF0003EDB20F27326C2EC438CADA7E37C9CB7FC
+:10BE0000677CDFCBC777F078FA3741BEEE8B144EF4
+:10BE1000904C7C6BDCDBCA2B67E7F479F5EC9CDAA1
+:10BE20001B5CF4A0643A7F68F1B077AE5A0CBAAAF2
+:10BE30008F05A05DBC4788725C41BFDA4678170A5F
+:10BE4000E885EFAF6E70F3778D38FDA4D227861C9E
+:10BE5000F29290AF84E2F7DDE88328AF75BA5F8293
+:10BE6000B9BD1B69CC5E02FC1EB9A61CC6BF75CA53
+:10BE7000E71877919F62BF78DED8677E45B9EE9D5F
+:10BE8000F50ADB87768B49EFC94CF3CA389F2E99A8
+:10BE9000B8019FCE087BA7D03959495AFE122F937B
+:10BEA0009B2E2F7BA760EB9407F15E634AFD2C135A
+:10BEB0005D4AA24F0D7DDB0AEB3C9590999E1B9A43
+:10BEC0007594FBD16A09E52BC17D6784FF5E8C5EAA
+:10BED000ACA0DFB0D51671C07A6C2BE7EBAA3A3A6A
+:10BEE000E05EFA575E178A0F58E78D21312A14C099
+:10BEF0003A47D552E6D7C177394ED3FDBBF99CE21C
+:10BF00004A2FF36775C99A08F189F92D8CBEB64E90
+:10BF100051701C9B266475480566F9CBF0749D9B97
+:10BF2000D1D7A629CF217D5DECF816D5DF39F55D97
+:10BF3000D339E2A97B1F2A043CF7BFCB121AF4FEC7
+:10BF4000C2A2FA97A6EE4D723ED0970FFB280FECD7
+:10BF500003A33798CF59E6F1F55DE0B5FAEF40BE9F
+:10BF6000DA707311CD06FFD281E9511FFAEF97B154
+:10BF7000F3DA5BF879ED99BDD7E2BB07A570973688
+:10BF8000C9BA7FD0607D07E2837D0F6533BF46D499
+:10BF9000625FDDF2E04FC6B2776574FE7B1A44CB78
+:10BFA000AC60EF5FA39E7E2EA8DBA5FE77CD8C77DD
+:10BFB000D82EF65DB7746A86E1BE8B54639A45EA63
+:10BFC000300D9008A6D9A40BD31CD8E7C2FB6BA4F4
+:10BFD00017538DA82231C9FD421244B88854632AF0
+:10BFE000C3BA65F49F4BC89D0E8CBF80F30BE07BFA
+:10BFF000E39CC238DFAFF6D644BC49CE2B567B4318
+:10C00000DBBDA8576228B7E773117EE2C763BBE0C8
+:10C010007ECFEA2DEC7E8921D7715F43DBFF513A59
+:10C02000D303FA0E01E5D73AF7D597211E5B6D1FB2
+:10C0300099CF1B88C35104BF1B63B43B9FFB17E61A
+:10C0400073FD07EE6D76FF2E88F77FE6839FC19420
+:10C050004FFAF2D97D6AA31DD13D6DD460E77BA66E
+:10C06000FA188F5C9360FF5F506F27C00B12EBFFD5
+:10C07000850E28ABDF0FF7A3CBB43C76CEC4F436E5
+:10C0800025240DEBB5D8DFC67D586466C88C9713A0
+:10C090009CFE0D7DB220C1AF9F982E90395F24B4D5
+:10C0A00043359F1FEECDE0DB2626BE36DEBF357E54
+:10C0B0005FEB96505819C6AA05601D553EEE0869FB
+:10C0C000AF1A46D3F70136F9F35FF4857FE735C53C
+:10C0D00043A9A13AD1FCFED222CE8733A5D64A90FD
+:10C0E0006FA7C32408FB875B48DD56B0C7C82B1277
+:10C0F000CAB7E174DCF0BB3FB970A0918EB0AED08E
+:10C10000F4E306762FE754C2FBD51FF277914ADBA2
+:10C11000EEB81AE8E00C7FB7DAE07FA3DFD22EF7A3
+:10C120003CD0FBA55DD36BA15C69A71D7FE7A9F897
+:10C13000D0C66AF00BC13B2D2EDA4F0EEDCF910E1B
+:10C140007284A0BEFDB0D5155D47C7F9619B8472AE
+:10C15000F95C8988EF8DC07397121F5F5A3AB4F368
+:10C160005F37811D7286CB11E3DDC70F2B35DC1FD6
+:10C170003F7B608300F7123E9CA7E1BC3F1CD69535
+:10C18000974EF193E363F7738AF6DB6385741C4B78
+:10C190001EF97D610DC8BFC2C89264E7CC437C4CD8
+:10C1A000FE7DF804C178B80F9DFC778D1C5D3EB311
+:10C1B0009F35CD2758E4D6875EFEFB48391728C740
+:10C1C000E3CB89A7CBC7F8BECB07E751F7B87F8C85
+:10C1D000F7D74E3DC1CE299EBDB7360FFC51C37D6A
+:10C1E0001A3BF73EF038C68DC33C601F4DC7A7C150
+:10C1F000F8EE71BF7906FC0FB41EDECF30EA9D3A2F
+:10C2000050CBCAB7D1F23EC43BF195013D30BC934F
+:10C21000FD4C4E18F6E3D26816FEEE427FBE88F95A
+:10C22000304427C57FE9FE6BF05CABD497CEE8596C
+:10C23000ED1A3B07C71FC983791C981ECE033FDE4A
+:10C2400029E377A0E4481EE0A1DA1B2EF599E6FF6A
+:10C25000C1DB4FA17C2F16EBDEBA0BE8F231F63BC7
+:10C260002477BCBE5D34CB8F69F0837893607E2BDE
+:10C270007C701E75AAEFBD9C088BF739CCDE635D20
+:10C28000CA79EF5407DD3F517C7CB0FF07987FAA45
+:10C29000EF3D9B2E8C27FB60FFB174486B783C3FD1
+:10C2A000895E8BFC45F1D2E248A2AFFAEE4545D952
+:10C2B0007DB7B3027F87F43E036F75CA1CCB791537
+:10C2C000E3EF9CF682E3682F4793DF934BD4F78923
+:10C2D000EFCA5EE81EF049CEA7EFF277D1567BC3D6
+:10C2E000D7FB505F58F548CDE6E57980E71AB8539B
+:10C2F00087710ED3AF80FD36DE3761EFCAC6104FAF
+:10C300007DEFC64EBC02E21C4FF9195CE79BBD41B4
+:10C31000E77864EFD256B2FA052CBF95E7FFCA5B07
+:10C32000BD98F54F04F6BB46363FFC3E8521FF52D3
+:10C33000CFDFFAFB14F7834C1E82EDADF60DC16C16
+:10C3400081CDE7EF6BCF90377F773B8E7F6C3B865D
+:10C350001C06BE84903D120C8EFD47E0EF6FAD4F82
+:10C36000E6E65BE4F917F78E688673A0730182F145
+:10C37000CFF6D6B504F4D2C29DDB93FEBE5D1FCCD2
+:10C38000E349941194CF4CFC1CF3313B3DC6E521AD
+:10C39000FCC1F9CC2842F87B1794A6B230E406F72A
+:10C3A0007FA3F97BEFC52482F6D558D2856909E9C8
+:10C3B000C6743CE9C5148F494780AB2F28F1777BC1
+:10C3C0002B60F2CB1CE1FB2154F7AFF6F033404F6A
+:10C3D000F07EAF20815DB4622A8CFFA84F357E07C6
+:10C3E0009424FCAE5AFFEF816860D7CC0E0C66D760
+:10C3F0001055FEA82F7EA390BDFFCBF821D5EFC42A
+:10C4000025FCFE24BF476CE06139E9C2388867DB50
+:10C4100057BF3086E27FC97E2FEA8351ED4DF83B4E
+:10C42000604B487716DC2F1DC5DF93206DEC1D0F88
+:10C43000E39D88316D76CBBB1ECB137E876829FFC9
+:10C44000DDB0A509DF8DFB9B9BE143923882C4FBE5
+:10C450009FA77D29DE612D49FE7B3089F73FF77765
+:10C460008918DFB31AE285847EB937666F9DDD4A8D
+:10C470005F5D971599DE7B6A14826C3FED7585F6DA
+:10C480000903FB19AB323BEE8020248D23BB268DA4
+:10C49000EF174913B98AB6D3B84C5661BFD918758E
+:10C4A000E13968A3CAF685C3BD550ED8A713BFA846
+:10C4B000C2FD94CBA569185FAE2C9727C2B9E7F1EE
+:10C4C0003D4BBAE1FE426340463FED703F3B0725DE
+:10C4D000C3447C1FA0497DCC3F1FD6C9C3CE19736E
+:10C4E0005582BF637AA4E37611E046BA6D190AFD5E
+:10C4F00008E16EBC77334C26FCFC75F6044A7FF9E4
+:10C500009C1E64D28AF78F672C7FD7097A3D9FAF34
+:10C51000FB94B4029C87CCD77377FD493FD0E9F3F5
+:10C520001DCD2F5F4EDBB345658C6B2DFEB2F10F39
+:10C5300097D3FE7A3B148C6735F090B746B6DC9FF4
+:10C54000CDB9CD0A2B09F7886562CAA7F038DE3F5E
+:10C550003CB81A33C755658698B350F5E0FDE04BFB
+:10C56000D304661773B814608A924E5BA4CA45C799
+:10C57000D9F986807E87A31D8BF2314EFF27E17C9F
+:10C58000A06F831E12D7EF4BB087908F7427BF1F09
+:10C59000EC84C3BA44FA696A2023C11FED881E7770
+:10C5A0008D83753C61C3F7A4D673FB5BF6B0F87757
+:10C5B000835E12D3F50974B7FECB6B91EE7A29DD59
+:10C5C000257B17CEA827AB1ADA09B61C1204F6B0E1
+:10C5D000657667ABB4DEB8A794A087A2ECF2474BB0
+:10C5E000D2C09E1977EC7AF65E1FC517BEF758AF1A
+:10C5F0008C847DBFBD3E73A49C01E53C488F9F7831
+:10C60000D8F98F5CEF0E427E6347454033D1757396
+:10C61000833A521E09EFA53A46C2EF2335A7F89D8B
+:10C62000E65CBF580DFE2585EFFF97A4B1F12E49BA
+:10C6300073637A0B87EF93F53930FEFB28FD40BC1E
+:10C64000C091DB18FDAE1EE6C07BCFAB9F1F3174DF
+:10C65000B038A0071B0223016FEDB7D5A0DFA3728E
+:10C66000D571E715C0E75E870AF428F946DD330D7A
+:10C67000E8FD051BDEFB6AF45668F34DED49BEC9C3
+:10C68000E85792443D1B36450D697FB8421E06F4BB
+:10C69000A2EF024DB461DB11067BF56C81E66FDB26
+:10C6A000F62C8387E8BB049A7FCFB6E7199CAB676B
+:10C6B000C32F80DCBFED570C1EA9EF02F8A16D2F30
+:10C6C00031186C0B6AC73CBAEDB75780EFA7D1168B
+:10C6D0009C0BFE9D1FD3F197D8E0BD5A961EE478BF
+:10C6E00031F21F83EF14DF87789A98FF24AFF77435
+:10C6F0008AFC7FE7F98753B4FF335E2F96A2FE5181
+:10C700005EEF788AFACFF17A2752E4BFC0F35F4C2C
+:10C71000D1FEAF79BDEE14F55FE6F55E4951FF77C6
+:10C72000BCDE6B29F2FFC0F35F4F68FF4D5EBE8732
+:10C730007FCFF1B6FC41A77497D3C15EF82CF6B653
+:10C74000A0FDDE5E578EF4DF3889D91906BDE740BB
+:10C75000BC26C85B95C5558D52D93EEE9769CCDE97
+:10C76000A85C55B40DE86EF5AF24D4A7548FE0EF64
+:10C77000F0EAAB58DCCBEAE7D97D90D5AB647C27F7
+:10C78000CDA047A3BE31FEDD7C7C4D7CBCC7D20A68
+:10C79000F9794B60E46C73BCA76A851D949F206493
+:10C7A000A72993E997E255558ED1A03FA87E01B9FC
+:10C7B000B9DEA3C4E01EFD7A55C6FCA6CC2A15F24C
+:10C7C000755546FDB33EB3CA311FFD39E9E89FC830
+:10C7D000E7717B4DAA8CF7F865FF0CCCBFFCD1D973
+:10C7E0002AC8D126D2EBAF84F9AD91F1BCF6485DF1
+:10C7F000157ECFF77FE607F9FCAC9FE1FDB8F7396E
+:10C8000027BCE72A7F4F447D81F8A3FD16AE11A314
+:10C810001A2D725C5D2D02FC4013D357F4CF3BA15F
+:10C8200082C771D0BFCEDB2B5E80F89DC62D721003
+:10C83000CE73E04F36E98322FE7BA54355B66F34B5
+:10C84000F4D57DDC8FAB071C188757249380F977CC
+:10C850002C87AAFC3C8DBF63362262D54F052DD6AE
+:10C86000776CF213F453A2BECAADA3F2D154DE1E0C
+:10C87000502DB0A0B2F72CFE17044CD03900800028
+:10C88000000000001F8B080000000000000BDD7D91
+:10C890000B7854D5D5E83E67CE3C3349669299640F
+:10C8A00026CF49801020C0044204449D848011B1E9
+:10C8B0000E0F15D4E2846780BCA0A858E9C7840491
+:10C8C0000C1435FE46047EA003A28516ECD0A2020D
+:10C8D000063B2022FEC53658DB8B8FDA11B9883C27
+:10C8E000C747953ED4BBD7DA7B27734E12C5B6F740
+:10C8F000FFEF77D3CF1EF6D98FB3F65A6BAFB5F6ED
+:10C900005A6BEF215EE2FD5A47C8E23D8B6FB410CF
+:10C9100042C6FFA228395A44C85253D210924CC87A
+:10C92000D7F07703214DCBC3D7F7D513B269B9A997
+:10C930009F429F4D5F0E9F464A0889255A7CDB2403
+:10C9400042562DB7F553FA75B51F68A32F9D846C19
+:10C9500056829389833E430A69CC23E4D0129940DE
+:10C9600079B1DB1432D2268B5FFBFD4DFDA1BC48B3
+:10C97000F6124F577FEDF399E5AE7EF0FDDF50984C
+:10C98000605C7D40EA777A38FDB71270F91309E9E7
+:10C99000D3AA9C8A9A08FE7D4DFFCB6BA1E5C2AE5F
+:10C9A000B25EEFB7D9AC84E492B876141E4553D684
+:10C9B0003BDFB4078A607C05C7D7C291DD40E71F23
+:10C9C00037AED165539557490D85A40F7D52580157
+:10C9D0003F41A71C7A9ACE336BE983A34FA71292EB
+:10C9E00079D4D20C7825AD4F129246880EBE4DE711
+:10C9F000AD483E0FA17468CE2BF64AF479EC590B82
+:10CA0000C353B615F16490BCE937D3A751F6DB6088
+:10CA10007CFAE783F11FCAB66C5D9307C58009F005
+:10CA200090B5830E98418BC19CD53E85D289A29B3F
+:10CA30008C86FA375A7C745E3BA4CE722594C3214F
+:10CA4000036B4F4804FE6F8F2CF17AE2535C84EC49
+:10CA500096245E5F54599145DB2BB6418A9790B975
+:10CA6000AD435BF4D741BD2CFAFBC8483A3FF81EF2
+:10CA70002F035E7E7E84D707AF6BA9E84BC737884C
+:10CA8000EF9320B4DF23CBAC1C2C6D81F17797F3AF
+:10CA9000FE41CF6ADF1884E7669D9D9025B6B216E9
+:10CAA000ABBB0BDE95F61B5B1AE9FC2E7AA2497430
+:10CAB0001AA476EBE93442875A352DE0073C12E29E
+:10CAC00025FEC1849C9528724774D14FBFB72C981E
+:10CAD000495F5D3EFAB7A422FAACD7458F2650FCD9
+:10CAE000D5EE0B98F4F914CF7A5F3033AFAB5FED2E
+:10CAF000DE492440F9A6BEBD189F3DF43BA6C8FF01
+:10CB0000543F93E12ABE7731F246DD2E5A55AB0BE6
+:10CB1000B458FB607BC2E8DFF3FC44FF8BBBDEB89C
+:10CB20001DBE77C9134D9B007C19A178E9A19F68B0
+:10CB30005FB7AF8C00DF5FB1F89A6CF4FD5D76B63D
+:10CB4000CE88D2E085F66153ABCD4BEBCDFA56BF24
+:10CB500097B6A7A40CC923BB9EAB6C7D713CED7B43
+:10CB6000EDFA099B48EA44CAD7C11AC5FB34817261
+:10CB70003061082DAFAD55863752905614FF71586D
+:10CB800011949FB312232D37D51C7115C13AF21A97
+:10CB900008152F64EDA8B01BD67173AD61DA76E08D
+:10CBA000DFC862D79CA2AEF157DAF508F7EA57E87A
+:10CBB0003A1B4A9FFAB05D82FEFD1402EBD06CA7CF
+:10CBC00074A665B33B8504F3A09D752DACC7D5FA5B
+:10CBD000406539B473CBE469FA5D73BFA995E51478
+:10CBE0000E975396740847C5C9B9B4BEC96600C943
+:10CBF00046DEB0CFDC0578FAB9E26D8075F873AB2C
+:10CC0000D516A4155436FA60DD2AFD1C21281B75A3
+:10CC1000A4214CE1CB2C26FEB0B50BCE376094118D
+:10CC2000F03420BC6BCDE14965741CCB62D916A4ED
+:10CC3000DF5B5DBBAE633CFDCE7FD63E7FA291BE87
+:10CC40005F93A61080C3EA50228624CAC7B7501843
+:10CC500029DCBB1BFD36909F31A742B6D17A4B5FD2
+:10CC600003F1C4C9416B112DC7C9A75487E233D35F
+:10CC7000FE317BE0651BFDEEF0D7DF34417FD70846
+:10CC80005986651356189D934AD4E3D8C6A8C74958
+:10CC9000A950D73B26AAEBD3A6AAEB5D77ABCB195D
+:10CCA000B3D5E58982DFA8CCB196D279B02A628962
+:10CCB0007EBC9C24217EDE02FC5B0A642FE0C75C04
+:10CCC000BBFDEC5C5A9F09F284C24F8690D0D3948E
+:10CCD0009E87737EE889523C1B531A3CF6A2EEF8FD
+:10CCE000C8CC36DD0CF4B2F6556C84B6B7BEFBD1B9
+:10CCF0009730BE95C4B5CB03FCF84E037DE1CF451C
+:10CD0000E149847F7800DF0D7FFE11E8BD133A2FE3
+:10CD1000E03BB356C1EF3F3CD513D2E5B1E684B654
+:10CD20004FE2ED934C6B3B7443E8F3DDD58B7449D4
+:10CD3000DDF19A461A245897943F505F902A82FA60
+:10CD4000E221995403DFD0E54A603C1B74A072E6EF
+:10CD5000C61403F2CDDFB97EA59C26437D9A8D8D46
+:10CD60006970CF36C37A5E7994F1FF4A031BA773CB
+:10CD70003C0F7E145510C849A35DC6F1C438EB6C56
+:10CD8000BC0D2F3BEDACBCE748CACDB02ED74D4D06
+:10CD900019067C62944900C64BCE32F906D0F99947
+:10CDA0005F3304253A68B2428EE853687B0BB9C7FB
+:10CDB0004FE1D870CC12D4D1F7E639FF61A34826F1
+:10CDC000857606F79E15DEDF831C8855298847B3D4
+:10CDD000B3D536AC88CD2148E14B817F50F958D688
+:10CDE000AFCD06F43497B5A2FE3617B7B6029E361D
+:10CDF0004C94D19E48992D233F9BB3C327FAD2F779
+:10CE0000FA39B20DC64BA18ADD4007793CABD5EFAC
+:10CE1000877129CEE552C62A302ECE907E2795E323
+:10CE2000D5E1D87BBF44C74985F186B0F680273B62
+:10CE3000C793D7EE41B81D7CDCD4BEB4FD10364E8E
+:10CE40007369D738828E1B2A4908E013DF15E37413
+:10CE50008E4F7C12C855FD6F28DE289DA41C13023E
+:10CE6000B772010919F3003FFE86ADB8AEAD641B81
+:10CE7000AC17475639F051C6B18D93E521D0CF821A
+:10CE8000DFD1CF2121E0E30C8598AE4F01FBC58FA8
+:10CE900078D4AE57F791D629748D74D245BB7EDD18
+:10CEA0000A69D1A5745FC76E87A3BC60480FEB59B0
+:10CEB000B35EDCC762F702D36BD7F596844BC580AF
+:10CEC0001712DF5EF7ED659D2E7C623C102B9DEA0C
+:10CED000098AFA1CCDF708F9CA086589C89EAFFB14
+:10CEE00080DCB7F3F540F5155DAC7B86D9C65A6199
+:10CEF0009D2E22C85FE52FACBDF33774BCCFFB1964
+:10CF00006CA057B28FB576807E24FB02FD810E9B0C
+:10CF100094C04F1268FDA693E904E4F66A339906BB
+:10CF2000FCAD703ED7EA97957CDD7840CFB9FEF92D
+:10CF3000A7B007C37DD306D9E8DA5BF9D8E1632649
+:10CF4000E77FA39D45FAA39D9575A4A3D10ADF6F42
+:10CF50002D6F3151FC9A5F67ED9B6939A800FE6A1D
+:10CF600072611D1ECE9E8B7852DE3612E0D3C13A1E
+:10CF70005F08CAE41D3301F9BBE3B9BBAB3D207FB9
+:10CF8000D22678400EADE3EBBDCD2EF5882FC5E05F
+:10CF90000B803DA17DFF08E017E9E93F5B45E938DB
+:10CFA000F8290359432B0BE5992D79B02E5653F9E7
+:10CFB0004B6B67EA3C753F96BAE8F30B73D9763B47
+:10CFC000EC3B969B48C048E775452201BA38B31D33
+:10CFD0006F9481FCC9211109F46C4E03357881AF3F
+:10CFE000965848208EDFB3AE28D8FE1766DF763B12
+:10CFF00097FF262A07F4EC9FE4E7297E52E560328A
+:10D000000AEC17FD2ECBFB203788A3C2D7B9DFC8A7
+:10D0100007FEA57A9F7E6F0F9FBF9EE2503F8CFE5A
+:10D02000679523C621DDDB3FCFF1A398AC11909724
+:10D030008AF5F849942F36E5427C3B5388E91B5228
+:10D040004342FD2486172CFFC086E54C2A7F8DC302
+:10D05000D0EE0F1A01CE24B6FF203E9FC79106EBFB
+:10D06000852092B34CA4C544DB21B7D3F5E6261D39
+:10D0700066B49B8F100FAC078A31FB9904145904D6
+:10D08000F0BA8990CAF875209E0536462765A90E24
+:10D09000F74B835E36233CFA061232833D04B051CF
+:10D0A0007C2B4B484881FDD65203B62BB079B09FFC
+:10D0B0008134A03DBBFBCBF732404E5B8E527B6C84
+:10D0C00028D059463965B1A8D71F218D88A7D39C90
+:10D0D0003F362FB7219D3BF7678137399DA38DA040
+:10D0E0002F7296A4A8E82BDA655DC92481E1F1E3EB
+:10D0F0008670DCACBE47245204F53958BF79B9E7D5
+:10D100005BC6CFEF657C37F251EFE36761FDE6C8A0
+:10D110009BF6EF51546C8A1DB1FB3D5DF6B516CF01
+:10D12000594BD47279E83E7559E0C5ACF7392651B0
+:10D130009C9BEF95BD5BE978D79C54B7ABCCFB03C8
+:10D14000EE6FBBDA471C53A03DDD7F6FA56FAF3D8F
+:10D15000AB6EEF2F7BC50EEBB8AB3D83EF862BEAB2
+:10D16000765AFA68E1A570396F8B836BACC9A8AAAF
+:10D170009F56D50D2EE71D7170DDE852B70F34F6BE
+:10D180000CD7CD85C66F844BB4BB75E4D5B5D3CE73
+:10D19000634AA5B117BCB3F6774CBBBA71EFAAFED0
+:10D1A000E676F72CD57E2788FC7EB3E4BB26853E49
+:10D1B00067C22BB017AD16B47BB5FCB29DEBA7EBE5
+:10D1C000C19EA34F7FA2EF7AE83706D61D2D1B76AE
+:10D1D000FEF14E902FC79E1D980E723D13F41CE277
+:10D1E00093F915F6D4B8D0AF3095AF53AA4F9A4102
+:10D1F0005EECD941FB2531B8E2EDA7D41AB6AFB049
+:10D200009118AE67612FA5109BC4F6E3CCDEE9ED63
+:10D210003BDAF11BED0CEE594BC7920FE83A7CDE7E
+:10D22000602B53607FB645427B6056854F9748F927
+:10D2300063748B847EA3590FFC6038C89551A73D59
+:10D24000FBA2F4FDAC90DD0B9FADEB20BE10E5AB77
+:10D2500074DDA2E21FD1E71387A9FDC3CB8B80DF6A
+:10D26000AC3E0FEC37AA00223ACE057D43B10DE467
+:10D27000E6F7AD3E909B55537D6FE17CFF41AD12CB
+:10D28000DA6E0E9B3A79A16D92C143ED8CAABB3D3B
+:10D2900023C1EEA90A9B7DF83411C542E75145ED43
+:10D2A0003178A61B886286A78598E059BA82D95F33
+:10D2B0004923FD862AFAFDAAF69FFE05FACD5322E0
+:10D2C00087983D19C27957B5BFF657B0D7E6F8FC35
+:10D2D000069017837618984DCAF96170585D0679E3
+:10D2E000105F2E8EA8CBC38FA9CB7F4A61F83D205B
+:10D2F0008506017D0E500507FBE2E06E23EA8BC335
+:10D30000078D489F85E72D5BC1FF3476A115E5FAAF
+:10D31000F99F99D11F75400E3F0BE5E0B309B8AFF7
+:10D320003EF4F68152899617FC225186FA17BFD433
+:10D33000219E613A7AFA7EE1B303B6AEA1EF170EF1
+:10D340000F97DAE8FBE70712D201F54A6808CCEF3D
+:10D35000F9AF74387E6CA731B48DF2C3F9FD3F7D0F
+:10D36000F641FAFDF33B3353244A976B411FD076C5
+:10D37000A39F3259609F31FAFCAE3E202F16EE304B
+:10D38000AAE6B53545E2FB194F12F05B6FFEC453B8
+:10D39000AB7F8AFD0BCF9E447E3BA00FCA1698FF41
+:10D3A0006AC65FDAF63B52D87A127040BF3C4A9F99
+:10D3B000CB1F59EE013F5AFFF56AFC0E08A9CB615D
+:10D3C0000ED74C12F73E0FC6CB5FE5023B752B41E3
+:10D3D0007BA6F0ECBB77E6811D6D64F683168EFDAF
+:10D3E0001C8E9FFD8C8EC3E4838ED9CF74C6743D92
+:10D3F0002EE47CFCA2C4EC57FAB72493F2ED425021
+:10D40000FCF95DEF176AE010E3DFCBC777F07D75BD
+:10D41000EC751DD2E3DCF2EAE1A7FB7587E7CCF2FD
+:10D42000860115FAAEF2DCF58B8EBA69BF9A3D4ED5
+:10D43000DC278AF7353B5F4EBB8BBEBFB043F18222
+:10D44000E95A33FD99474643BB9DBA30C00BF53EC0
+:10D450003ADF0BE15792A0DDDC4DF661BA383ACCE9
+:10D460005B7FEF808A3879F85DD78358BF357C7F42
+:10D47000FBC2C88EF199C0DFEB252F345B18BE6D5F
+:10D48000CA2D60AB6CD279FBD1FA5285F875C370A6
+:10D49000EB3D159E357B9E3B9A41EBEB0F8E28852D
+:10D4A00079AD91FD370F06FEDFA2473F96162F9FFD
+:10D4B000707AD3FE1199F65F73BBB53A64C5718F6C
+:10D4C00040F970E1361DF8D993CE52F9C4DE9F942D
+:10D4D000E99A3CDBBE7208F8130FE8AD2DC0E707F0
+:10D4E00012191D82BB7528E74984CD6334F71B2FC1
+:10D4F000FC539B41A1CFB367572495B17584F205C6
+:10D5000084B283CEAFFAA9C1B8EEE6AD57AF13D15E
+:10D510004EC03B3FA4AED7F2474AAA5857A4309E0C
+:10D52000CFB4ED5227060DB0AE6A9652791C67FF54
+:10D53000D49C6E3580DDA4FD0E588044D05587FC08
+:10D54000493C385F339B2F35594D74BEE7E05FCCC3
+:10D55000EF2DC1BE7C818453240B07920A0FC5E7CF
+:10D56000C2C9A4129E07A4C8233A2ECFD0FFBE3B47
+:10D5700001E5D9055BF499FF04FEDB95ED0DD2AA18
+:10D580000CEE97BBE08924A5D0E7655817C07F361D
+:10D59000565ED04EE5395DDFE72F1A50AE37865F15
+:10D5A0004E027A5D78D62CCB942EE7F7A496833F73
+:10D5B000E742F8374930AF73E1D472F0CBF5266F0C
+:10D5C000B4724AE8F3F7E19FA3A89D96EA1B960A76
+:10D5D000FB9DE65430C6497A6A4371430FEB5FF412
+:10D5E00073181A8A3D2037BE6FF5C2FABC21D5C325
+:10D5F000F486C4C6833F1FADFFE458EA36A0FFB1EE
+:10D600004305C9A0E73F219E6490BFB739FDE5A956
+:10D61000B4BDABBCC3A703FFDF04E26DA27D3ED067
+:10D6200079EFB3513CCF2654EFC0B32460407F491B
+:10D63000B313E19AA5908842F97416E8C5215846BB
+:10D640003CCFDA24859A281CB3D7AAE739B7CDD8BE
+:10D65000455FFADF7C4205232CA04D71EDE8F8F31D
+:10D6600041FF51FC2D309148021D77C17675BF8571
+:10D670002482F0D4ECFADAD8131EFFC2F1789BD3DF
+:10D680007757AA4A7EE9517E2D24FEEBE1BB0BB908
+:10D690009E9D633C8470D43FF0C080D9D46EB8BCEA
+:10D6A000F4C101B353C10FC8FA91F512F2DFC20AF7
+:10D6B00012C9A6702D6C972283C10E7893D1478C26
+:10D6C0004FB6B07677723B650EC507E8FDD1BBA4B7
+:10D6D0006022DDC7CC31D12D18C80F3E2FA84FA630
+:10D6E000E56AD28AF3A9255184E37E4E3F8848013A
+:10D6F0003EFFF226A3DBE8EAAD3A00EAD8A1528C5D
+:10D70000CB7D4ABC483F6A4F10734A77FE007CFBD2
+:10D71000E2F053BD495D26DBE3CAF9804F5A8EC360
+:10D7200073DDDEAF8DBE1EF0FB44A73E090D9834BD
+:10D730009874B357DFE3F87FE2B6B96E58FF8F8273
+:10D74000FD96C1071809F292087F44C444C7B70C7C
+:10D75000272AFF04B58BB0DCF6F86B37ADCF226417
+:10D760009D3E807EFE593AFF5108497DE60CAC078C
+:10D77000BACE927D390ACA015F01EE5397327A3CE4
+:10D7800039AC6140430FFB5301FF3A291C91411E04
+:10D79000EC67FA3DB124A60FC4ADAF5F72F9967C79
+:10D7A000387A3413F8E63909FDE91B24D22C513CB0
+:10D7B000BB2859400F6C90DE3F0A7A63C34D1ED2DE
+:10D7C00044EB4BF64E5AF40AEE712D5E884FD4EEC0
+:10D7D0002DD3D55A71FECCCE4C68D82AD3FAF47B1F
+:10D7E0000A87C1FAA0F3BE67327DFF02A7B7DBCA82
+:10D7F000F8C1B52298B718FCA987FD8B5E81753DED
+:10D80000D8827EAB748AABC4147CB680FDE8228DCE
+:10D8100012B45BE594901EABAAC8B45F1621D7285A
+:10D82000C929EC79923E258534831F365DA1F628FF
+:10D830007BDF0CDF792289C1E59475F74C027B7898
+:10D84000182BA72C937CDB90F91F437CA51B492543
+:10D85000CC1BDE83FD4CC1F0EDC1FA10C29D3EB67B
+:10D86000A118E048EFC39E0E43240BC6392EF8A43E
+:10D87000DD2D839C5EC2F5ED923D65E929B4FFF193
+:10D880000B2605E4E77197B0FF2256B0FF48DF4250
+:10D89000D69EEBB525C563D381EF1D39EA7697F5A2
+:10D8A000BEE4E1A01F4EE8304EF399D5976CA7ED8A
+:10D8B000AE35B07968E97F96D3B5FE8A444271FBF4
+:10D8C000FDFA699FA35D5D7F4551BDBFB0DC444259
+:10D8D00071FBFD9AEAC3E3A15D2DE95805FC581BD5
+:10D8E0004E20A1B8F571ADA5E7EF8A75517F454788
+:10D8F00082C391EDB3C02F795C1F5B3507F8F0A0B0
+:10D9000084FEA37ABA8F0EC6C375259504537B8215
+:10D91000334DFD9ECE4755DEF705B62323A349F0D0
+:10D920009D4BB668929DCF0FDA097D77392407F5B4
+:10D9300043312EC8F41EF875ACCCAE9D04F455628C
+:10D94000499313BBC615F5305E4ADC3C2F4D33902E
+:10D9500008D22586DF05BC05FB13B2B1FD63830742
+:10D96000F47FFB21C49BE09778FC05E3E3444D1D65
+:10D970001199CA8A7C876D4DD100CA7A87855C4827
+:10D9800059037EC9349DAC921309259D7203C5D4F9
+:10D990001310B5423993BAA6624C7C99B5EFEAEF01
+:10D9A00098007ECF9222D6BFC8E1FCAF157DE17D05
+:10D9B0002B93BB4A2CC79F18573669CA565A1E1C50
+:10D9C00057B669EA1D9A7A97A69CC5DA5F488CE437
+:10D9D000E8BC54DF3BDC13142A2F2FB82333E80EA6
+:10D9E00096AC6DCA9C5041E5586D09D3C775ED9250
+:10D9F000177D751C7F755E66275ABD51C3AC22C06A
+:10DA000043C751902B35FB249B44D78135BC2782DB
+:10DA100065E8E789EB1796B05F4DF87DECD7EBF83A
+:10DA20008532AEF33585A758BBF087A8F757355731
+:10DA3000613C5DC48B75C4EFCB94BAE2C542BE5E57
+:10DA400072FB5E96195FDBE2F74FF5306E9C9F46E6
+:10DA5000B47F6770FB1FC0AC4858F27123D8AF7F0A
+:10DA6000AAFD7004D873EF40935120AF4303E0BB8D
+:10DA70001B496000E8C9EFD7F63B24D376EFE9A352
+:10DA80009B2126769FA318F1F75E62345BA2326673
+:10DA900069DBB5ACEC8C6E067CFEB66D0C2B674773
+:10DAA000B3655A5EE698C7CAFDA29BA1BCBD6DF2E4
+:10DAB0000485E2FBBDC1D16C1DED9F1F9C32A1828C
+:10DAC000D63F6DEB793DD73A981C11F0FD57BEAFAC
+:10DAD000DA01F3A961FA6733B5374D545ECE587059
+:10DAE0006EF7D3140F337E988072ECE90B53263017
+:10DAF0007B3CE8574AC1DFCAFE503FA29C57D03E4C
+:10DB000071834E4CE9A247624E8707F5C7C0863D38
+:10DB10006067A4CF2842FDE14DF5FD0EBE2B9EF7B8
+:10DB200067B0E7EF1C3626B77532C69FD31F4C444B
+:10DB30007BEC51339B0F5D37485F2BA7C70A07F378
+:10DB40004BAF70303FEAF4D47138CEDB926F8389EB
+:10DB5000E2FD6D3D099A41CECEB7A0FD7CD7562A95
+:10DB60003792C18FCFE06E7BCC1D82F8F95D12F148
+:10DB7000835C11F2A3CDEE73A7C4ED43DA8A69D9B1
+:10DB8000DAB5EF6C9BE4735B1CF04C9321CE22E47E
+:10DB9000525B1EEB27F4517A13FB4EFAA303B6C176
+:10DBA0003C1214E62F9A33AD605B23DA03937FE7D0
+:10DBB000007BD9E77383DFE1F4FC7C19FC48823EEB
+:10DBC000E7F37D9BA0FE4EEE87177412F4FC1D9FB9
+:10DBD000F72C1DB527E87C8F3B03381EB52F8670C8
+:10DBE0007F15DA17BF03DD1E875FA24447C0FBFF26
+:10DBF0008FF07408E8FEAFE2A976299517F255C8B0
+:10DC00000B8EBF7552449FCEE405EE9FE13DE89D2B
+:10DC1000CDA9813FC0F8E2FB331EAC457B52C095D5
+:10DC200070FF0B957790EEEB4C6BEFFD19E81567E5
+:10DC3000977A85DF917FE7BDB74D186778CF10469B
+:10DC4000B9F91EDDFF34827CE171F2D21F2E3C0E49
+:10DC5000FB3F31EE38A70EC75B2DF9DC30BFD59402
+:10DC6000EE26807F9201ED7FA157DBECA10D90A7FE
+:10DC7000D0765B16E6295C262C1F24B83401DB5DC8
+:10DC80002B9F22E0C78C8DB2619C9AF209D6B74DCA
+:10DC90002FC07C11CA0F4133D4537E82BCBAB66206
+:10DCA0003A21186FFA40AC87FD31EE6BA79B70BC30
+:10DCB0001EF884F985FBB37C88B63CCE87F3F391DC
+:10DCC0000FD39A98FF9128BE2193E2F47C9E93F99A
+:10DCD0007D124AA2CFFD2FE0F9B566B46741C76255
+:10DCE0000CA7351DC7A3F4B738991F00F96CF623AC
+:10DCF000893CFFCC5B0A787D2891F1E526338B2F98
+:10DD00006DA2F633CA45CEBF22EF2DC0EDBC68B57B
+:10DD10009C04F682CBD9E95FF0C17E1FFDDBB47EA7
+:10DD200066547A1FF66B3383BA8811F65F2DE37C55
+:10DD3000D1B8FD0BFC417CEE1E2E57C97A827EBF06
+:10DD40007BA05F128C6F498278E43DD01FFCABCB87
+:10DD5000C6A9E26E039D6C7D0BF8B4727FA093C9D7
+:10DD6000490AB72FFE3B627CED7874FF39C8E9445D
+:10DD70003C4792611FD1A8433A6AE18CAE677EEAC4
+:10DD8000E8FA5CE43B315E6F70FE5917BB57A27A2C
+:10DD900070EE58B62F17FB9E397CDF4C96A9F775AD
+:10DDA000E057E92CEBBA97B5FB4488A7ABDB33BB54
+:10DDB00025A12866C0388B4752C12FF0D51B1E26DF
+:10DDC0007D47BC09BDF7A499CAD314D87E4BC8B708
+:10DDD000EB1F48403DE6308406005FDDEDF460BB9C
+:10DDE0008D90D7827A95ED973F3D2EFC1CEA7D728F
+:10DDF000BD25B605F0556F61EBE8D2C1445C07A4C0
+:10DE00006F7406E4855D3E6024C0BF7552B400D6D1
+:10DE1000F525C95785ED1A133CB09E3E903B10DFA7
+:10DE2000F580410A577DF0EF988F54BF4FBD6FBE0C
+:10DE300044FFABA6FC7E498E96C238421EC0FA470C
+:10DE4000BBA89AC569EA6412847DD5B5F2CCF9A85D
+:10DE5000FFA767906DF8FEFD02D84709394FDB1D1B
+:10DE6000915218DBC07AA9E1F8AB934F61BB1AC895
+:10DE70002B023CC2FE0AFC615019E7C7AD5B7B1E5A
+:10DE8000F39AEAF6AAE95CD3C507D2D712F48BE37A
+:10DE90000B5CC741A41BDAD9B0EE2B589C39919783
+:10DEA000132A3B30CFA99EFB3B9C87A3E3419E24D2
+:10DEB0009684C94CFAAC3FCBEC8CD1ED5B5F867D90
+:10DEC000B4BDB2231BD8BF9EFB03059D059CA3DAFE
+:10DED0001F43FF86B04FE2F6990326ABFC0C2BB034
+:10DEE0001FEC5BE17B5178E506F233BDB68EEBB5F6
+:10DEF00004D80083FE6BED8FFA0FF413C825B1EF41
+:10DF0000053905F2E13367F94F418EAD4D2BDFC680
+:10DF1000E419E52FB0E761B334AA773F9EC08F685C
+:10DF200007FBDF6FF2D3FD92F3ABC3C0E52E617E3A
+:10DF3000B9C5AF39855F0EE36F8B254F3AF0EB190A
+:10DF40005D00FD6FF34810FD42F3C1EF459F357C46
+:10DF50009DCFE5FEA4B9DC8F047EDDF83821F857AB
+:10DF6000E3CB0B08E35FB2C3D8953F037E9F0A1251
+:10DF700049A4E3D5825F0A9E6175BF3A12637CBFF4
+:10DF8000EF6BA32A0ED9C6E67D0FA7BFBD22A4035F
+:10DF9000F9B0C1CCFC51426E8C5EC6FC56C9C37C44
+:10DFA000792B81CF5FD3A33FE37F73BA093CDDE6D2
+:10DFB0002CDF05F8B7C03E0DDAAD34A2BC3C4DF500
+:10DFC000F01EEE47990CFBCFE5810190FF4D145BED
+:10DFD0004EFCFE543CD71C305703FFFC89EB31F15B
+:10DFE000FE31A79EF9E15730FE8D3526A0BD4DC507
+:10DFF000C610E0AFD27CA10FC910F06BBDAF677E39
+:10E00000E0BADBAD01182F2A3339738ECBB3734ED0
+:10E01000967F27CA9DFB3BCE3F22BE077E9E78FFA0
+:10E02000FAC79DED1FE37624C1F9AE9BCFF3B73B52
+:10E03000F95846799450E447B97BAD5C8EF228F6E6
+:10E0400091D50378A93C5F331FE6F1C9340B8138C1
+:10E05000DB6CEEEF95D2EC0887F0EF7E5BFCAB72E9
+:10E06000CD009493A23DC472A1BFD64F7C80CBB1AA
+:10E070000384C11B6C3632BF3C87FFC0D98121E0CD
+:10E08000636AD70641CEC5F69899BEA37628C8D74D
+:10E09000037BFB87603EEFEB99BD10A4F297F50F71
+:10E0A0006C003FC8815F3ABD90D753BFE0DC10B031
+:10E0B0001F0F9CFDD9AF7E0BEF0F1ABDB0DF3BC029
+:10E0C000FDF235864801DACB3C9FB1262952007E0D
+:10E0D0009F1739BD6A2CB44CDF579802D96923BA0F
+:10E0E000E267D00FDE9F0A31BBFC14617C105CCB71
+:10E0F000E29C14BF6E8023B63A1DE36F302FA0C39D
+:10E1000007070723DCEBF4BCFDC3CC7E3BC5CBA7E4
+:10E11000F617637EDF65BF01F371EB1F65F6E22C36
+:10E12000D9B36529C8CA9712D0CF38A7ED04C64322
+:10E13000EA1F993711EAEB172CFB1EF9863801E824
+:10E140009578FFF62512CBC17D70757E3842BF7B76
+:10E15000A97D809785FB5C185CAAE3799FA7297E3F
+:10E1600001EED8413DE2FF6AC747876129D36FE8D6
+:10E170000F8F8FC7A03E50C767BEAD7C491F2D785B
+:10E18000807E3F9812B835CDC9C41DD0BDFE25375D
+:10E19000CABB0F1EFE2207ED8956164F38ADF7CDCC
+:10E1A000807562AF881866C6D95FF3D2F8BEC3C85F
+:10E1B000ED462A07E3D7BDA82F2D57AF33F19C9B1F
+:10E1C000C6ECC9441EFFEF5E2FF25EA718417F32F6
+:10E1D00097128CEBC17173795C6EF4D9D821C8A306
+:10E1E000AA091763DC2F775904D725C57704ECFFFC
+:10E1F000D31B12993CA1D38471E68E2468B7CED587
+:10E20000B17C86B9466A07333D8EEDCF6C48473CFA
+:10E2100094AE60F65FEC3909E5A2884F5611D6FF3F
+:10E2200085E6F7833ADABE6A87544C452BA96A2EF5
+:10E23000C37C87059BF290FEA3B9FC9D65F4156C29
+:10E24000007E7B2111F98D7E0FEDED1AC8E91A864B
+:10E2500072C900FAB07A8744D690F878AA860F423D
+:10E26000EA78CCE83093DFA037489C9D26F410E88C
+:10E270000BA2B11FD57C11E4712A469FC701AF23C1
+:10E28000BAE43F62EC1BF420B5A3DB601D9796B3A4
+:10E29000F516DB23219E6B49038B1F713DD4090FBB
+:10E2A000D76367744C6FCE353E86CF9D697908C7BA
+:10E2B0000288B360DC206600B9D81B5FECEC852FC8
+:10E2C000043FFC8CCFA3E62C895C47BF57B38C443A
+:10E2D0006A87B067E210D4CB4C3F9B987E86A7E557
+:10E2E0002AF4B4563F6BF5B1560FA71B98BE157CA8
+:10E2F00010EF97077B64F4B2908EF95FB36C90C710
+:10E3000027E8323DD57730C3D9656FD59F34993C26
+:10E3100043A1EC27F956F02B95556681DF9ACA6F19
+:10E32000587709144F5BE9FBCDDC2E1F91C5E6EF52
+:10E33000E2F93A7AC54F8AAD40A70EDC47C79C0484
+:10E34000F7B502BF9B1369BF61D08FADC7CEFE2664
+:10E35000D26C89EB5F7EC08CFAE4F3FD89985F4252
+:10E36000F543AE9D8E97F60EB5CF69F9D28144D4B0
+:10E37000EF97B8BC77087F055985F4FD13A7739014
+:10E38000946782DF9748133241440ABBB1D6DE9BC3
+:10E390009F9ED7E775DCCEF8CC887AF6737BF43E87
+:10E3A000285378301FF80F5C2ED4EF1D5BFC20E45F
+:10E3B00001F8AD5E86D54031D80D46DD92DBC11F38
+:10E3C000345EB72CF6009D476DB615F38C2B72DFCB
+:10E3D000FDE3745AFE68AF9E1881EE4F4F498E40A0
+:10E3E00037C5E7EA493FCF0FE955E7D816EE509712
+:10E3F0006BC3EA723D893BE74651B0F4DDE2EB8F37
+:10E40000C4F1C95769898E338308C8142FE44913AE
+:10E41000DDDDC9811EE4A5787EB1DC7BFD113DE622
+:10E4200099E9D3591E8D01EC9A99C00F3DF46B4FB9
+:10E4300063768DD1D87016F2D58D2F1ABD8DB4D7D5
+:10E4400089B44012F4AF936347819EC6DC0B43400E
+:10E450000F96E7FE03E3679FFF8878013F9F9BCB02
+:10E46000D0BEF97C83D903FBB2B61C2BF357BC2476
+:10E47000852466BF4F1C510AF1529C03A95F7FD3CC
+:10E4800047EC700531C9485FBA7B71819CF1E17E30
+:10E49000EACC248B6D05ED57BD9EE9DB1AD29104C1
+:10E4A00072604A3AA79F6E97C144FF99D7EC1BD080
+:10E4B00048E15DE8B7E0B91AE54BC50FFCF5100C73
+:10E4C0001967FF0F4C67F2A0D6143594C1F7FF31DE
+:10E4D000BBD299DFE5DF32E8997F4BD9571CC9A43D
+:10E4E0005DE72D9D85FB9CCEF8F30696CF34EF813A
+:10E4F0002A7CFFF20623CEEFCC4109F9FCCC66362C
+:10E50000FF79EBCD1EC8BBBEC1CEF6B3F368BF9E8C
+:10E51000E77FE34730AF0F37DDEF05FFFC87847DF2
+:10E520002768637EA80F6D2C4E0E6D619C0FF7F669
+:10E53000413BA67AFDFC899867B659E7053B821CEA
+:10E540004C44FFCEBCCDF7FE7614F88F26DF59027F
+:10E5500078B8C1BE240DFC25B49D3FC4EC6296BFC3
+:10E560009B32F2195887377C39B6E306B09736D319
+:10E570007592C7F2E3C14E3FB2F946B44BE74DB2D4
+:10E58000D8615E9E4D4F8F07FDF1E1A40C19E7B3F2
+:10E590005B2236C0837D691ABC9F2729FE9EF8E95D
+:10E5A000A334E6672BCBB57A23D0EF0F3AE413BA46
+:10E5B000AE6E07FD59BB598F76EF91C96FFF71BAE7
+:10E5C000A36B5DCDD3B5DE3E3ACEEEA9DF748BE012
+:10E5D00013122985FD14C389767D19739715003CA4
+:10E5E000DA75366F4543018B577DB7F54636B1F581
+:10E5F00056932E91AFE5EFB4DE7E90EEBCFAF54671
+:10E60000B25254FBA8EE722D88ED84BFDFE425BE24
+:10E61000A7AD18D7F549E0974B57B07E533ADBCFFB
+:10E62000287F5DBCE3755817E9819500472EF115E9
+:10E63000031F7962B672382B64E5761CD9C4EC6688
+:10E64000B0EF81DEEB9CE49935717E87F5E9EC3C17
+:10E650001B5DFF8FC03897DEFAC751A04F5DCE8596
+:10E66000212CDEF919C607ADED2CAE6CF5C630DEF7
+:10E67000AE77F891FF845CAFF732BDA39DD79FD3EF
+:10E68000D9F98B7A470CC739E062EB50F8DB372EAB
+:10E69000B5A09F74A32364667E852001BD3471A458
+:10E6A0008EC5C5B89D750BF73F9A4A5E26100F239D
+:10E6B0006358DED7EB252F2BA9B4FCDB91E3BC78A4
+:10E6C000DEAEE4A9967C98F7183DAFEF138479FF8E
+:10E6D000CE5786F58B5D3A0FACEB89252C7F915494
+:10E6E00027A1BFE4F5920F1CB3E3E0F71393C74AE9
+:10E6F000F96432DDE4C4E7DB7D6F8CD9638DE3AF71
+:10E700004F5AA54A66EF7A92A70E66FE10D4C3252B
+:10E710006A7C2C7619F0BB6BD3CAF6039E6FB89E49
+:10E72000D1E3DC6E6308E4DF397E7E458BBF63E9AD
+:10E73000DCCF7A77A12A3EEF308473403F9E97D496
+:10E74000FD16B4E8303E3EBF452221FABD733B5F63
+:10E75000C80139FED1D32FE4CC8C8347DB4F3CDF9B
+:10E760004857FB01B57EDDDEFCB9A2DDE5F524608E
+:10E77000EAD3D5FE72F5DFD09F3BB39DFB837DBE10
+:10E78000BE0ED807F1F6DAF1FECEF943DA27A1BFC3
+:10E7900043F8334F1D7B0A22279DF433B7E7C9F1B5
+:10E7A000F98AE2399AD36D0AD08D4EC5DCC2CABD52
+:10E7B000D1ABB7F5F8643A8343D0ED544B9F64C0B6
+:10E7C000A3A1CEAA10768EAC10ECF4CDC4E285F5F0
+:10E7D00064C87059417E8973F85F98D9D361A14F9D
+:10E7E0006AAF65671462BFFB653FE6C57D21B7E28E
+:10E7F00039C2FB750D986FFD15FF5E96CDBF672E74
+:10E80000EE4FC2987F4D5AD4F84D6B62FA2356658D
+:10E81000403D25F07CEDCCFB709FDA037DD603DF15
+:10E82000648C64EFAE71E571BF4614E304E691C4F5
+:10E8300006FBF9A651418447D0A79E352752BB84D9
+:10E840007632E4B524A4603C34C89FC49A423AE3CB
+:10E8500003097C5F4B34F1002AB682D04EC00962B6
+:10E860000CF2631EB5875B0B4A309E8AF6278C0B31
+:10E87000EF671629E84F87768661DFCE6F9D7CC9EA
+:10E88000F30C278AF7D5961EE30F13E1BC0E6D9F9C
+:10E890004DF520D87FC4AB579DD7D944ED66D88FAE
+:10E8A00089F8AE4E0E17BB701FD21105FF88A1D498
+:10E8B000E401BD9AA00B1702DDB4F15EDA2E8FE5FC
+:10E8C0001964D941AF88F338754BC7FA21DFBDD33E
+:10E8D000CE38C8F647750F94E1FBB1EDCC7F5EDF13
+:10E8E00062C4F384F5FB248C57D5F90D2113FA315A
+:10E8F0003C8D40AF20B5C360DFD86667F9516D37F6
+:10E90000D9BC4112EFBF8E6E7910FDD7568CD3FD66
+:10E91000B3F1CBCB89140143E3E253C926A647B830
+:10E920007F3B8DF393A0BF58CF22DE9958E4CF03ED
+:10E930008BFBD7EB66FFC6E2FC2E7921D73E0C7924
+:10E940001FBDE7851CBD05F2464C60CDF37A008BF8
+:10E95000EACDCEF375660FC6B53AEBE15E04D33E61
+:10E9600089F7FFC12DE3FA62FE283F5F77DD5AC8C1
+:10E97000637ED44C54DF8B874FD18CAFA7E35B3DD4
+:10E98000A2FD3D378F5330BECBCB2FFDD847E17F63
+:10E9900054AF1E0F59509C0734757DAF3233E1E1FF
+:10E9A000B563BAF437D5E7CB5DCE2E3DFED0DB1391
+:10E9B0005B877A607D7D8AF9B8421FD73B589E8875
+:10E9C000566EAD7149C2FE1D0F2A76D5B42ABC47DA
+:10E9D000A033BEDB3EC907F72988F86EFD323FE65B
+:10E9E000E582FE77A1FEBF70E61001FBF21CDAFFA4
+:10E9F000F55714E60FA2768444F9D0D45E867E4F94
+:10EA0000483705BD29E8BF80EB25B0D581BFEB377E
+:10EA1000DDF1B40EEC6597EF491C97EF03B5F08676
+:10EA20005DCC5EAF2F2CDF00F2806C9708E8ED35EF
+:10EA3000859FA09D51B77FDC88F8BCF2F9FB9E60F2
+:10EA400079C93BF43DCE3FECD2A17CABDBFF1CFA95
+:10EA500033CF85D871966A25B47A34F855AA65B053
+:10EA6000B44849A86A3AEAFF69741EE03704BD0356
+:10EA700076CA8E2941C873AFA7FF01CA36FAE7A24A
+:10EA8000BDBF719AC90AF19AFAC2998B703DD82C10
+:10EA90003E98BF16CECEF8F00316F437AED9A7AF26
+:10EAA00004BBA994DA49BFA2F066A74CA8F452B9F6
+:10EAB00094A9DB53FC032BC4D57BD6C35333981ED8
+:10EAC0006E96FCC15B4B300F92C4E7E9E4EE63F64F
+:10EAD000D8AB2E66BF89F7AF42E223C5E79860C77F
+:10EAE00058E0B997946802D8C5F5C4F731EC73893A
+:10EAF000DFEA8171E02606B0B31CCB3DE8CF3539A3
+:10EB0000A23F1E8A769382FB0CB18FB8B49FF9BFE7
+:10EB100046B9036F021D4B75D1C76F05BCFD989DAB
+:10EB2000F3250A93373953ACC3C05F6576441FAFF2
+:10EB3000F4607E0DFA1F92AF6B463ABCE42036C0FB
+:10EB4000CFD8609522C5E9192137C6769EA771A056
+:10EB50009FB49C8B977E945A674CC8A2CD5FA776D2
+:10EB6000D905C7FE31558197C25E904D01DCCF5467
+:10EB70004CA3FB43E0CB55B1A332F8E51D1D682F34
+:10EB8000D68625FC4E6DE12F31FF6D21CFB3EACC47
+:10EB90007752A298FF75C995C0F56333E34BD281D4
+:10EBA000FB5FB28BE19FEA4DCC0BEBB2DB1BB19D5F
+:10EBB00018CFC0E309B5DC5F431185F57F7589780F
+:10EBC000C20AEEAF12796CECBB44F194C6FB17D6C7
+:10EBD0004DA29A04E1F22401BCBF30FB65376D7F82
+:10EBE000AA5A66FEEC9684101C0E5D2775F8C0EFDD
+:10EBF000182CEEF91C4CBA5BE279B2B1F1E8EFDF08
+:10EC0000DF5B9E2CCB8BDD306220E69597ECFB78AA
+:10EC10003CF007A924B81EA9BCB8AA3CD92C375B84
+:10EC200047FFCFE4C97A25DF36FA1CECB6ABF364B4
+:10EC3000BD8C5E227EA9CD8FBDE48E282C9F2DBA7F
+:10EC4000E569D0BBFB8C98273771DFAB27C17F39D3
+:10EC5000D144C218CFD5D80FAFA54E29053A5DBE15
+:10EC60007866CB4A02F9D5CF7B59DE9DDA1EE8CD16
+:10EC7000FEC79846DC3EB1D2FDEFB5FF85BCAEE7DE
+:10EC8000FBA9F352EC910298DF419DADA77331B718
+:10EC900089EFF796E7D1DE739E8738775519CD5304
+:10ECA000C5A7EEE91CEFBBC5BB66820FBA87789794
+:10ECB000C2F3B71489890E926D50C5BB147B416FA6
+:10ECC000F1AE08D63FD71FEB1FEA16EF627905CDEC
+:10ECD00007D33D60DFD73863CF3CE381F10C384E7A
+:10ECE000F3FE8410E4B93773FCD75C7DBCEB41774D
+:10ECF0000FF1AEADDC7EFBA0508E18285EB7120679
+:10ED00007FB05DC4BD64DCC7C61ECE16F063FDE5F2
+:10ED10008707A1BF68968867BDC4FC68B378DCEA42
+:10ED200083C90598E7D51B9E67B5A8E3020F039E2C
+:10ED30009DE8E7437FFC7DFF3109FD5373C18FDF01
+:10ED4000A7EB1C04E1FE3C4F0B3BDFEED921853CD9
+:10ED50002CAE6292D136B4C9F07E2115A31B41F4CA
+:10ED60000629D75C435F4B146BB4DED34CCBD4E89D
+:10ED700057562B41176DB7F56402FACF1E72781003
+:10ED8000DE879A597C39B8560AF563E3E2BD61C162
+:10ED900066D907E3EC7633BFD32B6EA6FF3C9AFB14
+:10EDA000089AF53C4ECCBFD748E4083C65893D1F26
+:10EDB000B229953DD90F62BC667D83A90CF09DCD2B
+:10EDC000EE27F9DCE09B86FEE59402BC87A839B10A
+:10EDD000A1A592D5E39AFDDC1CF363FD750A3348C7
+:10EDE000892705E07DCACDEC1B2D9EE7B4AACBDABE
+:10EDF000F88EF6DCD52C12E8EFEED3FD5CD2536E24
+:10EE0000A6FF3E5F93C7E9E2C57849B3DEF3461E2D
+:10EE1000F0FB6A76CF506316C39B9CCD9EF9F60A31
+:10EE2000BC0F8ED8B91D4718FCF9D73924580FCD1F
+:10EE300076C6B7FF2ADC5A785F771730FCDAD97AC2
+:10EE40006D5E2D8518BE18DC57EB1739FF6F968B5A
+:10EE50001F48DE672279D80FE542F0613DAEBB5313
+:10EE60002494C9F2266D283767F27DEE675CCF6D7A
+:10EE7000ACCE4F8238E8ACB3ABF0BEA0B153AC0817
+:10EE80007FDD4B66DCC7D52E8BE6003F6BF108D0EB
+:10EE90002A429ED2FA990EC2EE996951C7F5B4F191
+:10EEA000DA608A5F8678505D79B400E2464FC81F09
+:10EEB000EC7995C935D4AB75CB62CF809F796A4A1E
+:10EEC000C09C41F173E181B7C74B1EEC8EF2EDF2AD
+:10EED000C1FE78BE7066B3FABC1659AB8E1B929613
+:10EEE00014762EAD4DFD1ECE27A9FA758B2332BBAD
+:10EEF000669D213000ECCE1BAE67791217E7CB047C
+:10EF0000E879D14C787C5EC8596F41BC1E28E07608
+:10EF10006F77BAD27680679E172ADAD7025D293DCD
+:10EF20006B385D2F3E774D01D0F5C29E6B0A80AEE7
+:10EF3000EBF4AD3E58179F390303011FA7C7F9D162
+:10EF40002E1479B057CB6FA332FE67F5F078819716
+:10EF5000EFA887E12FDE5FF2D23F58BE6AB09D9DD9
+:10EF60004FEDF2D39DC37BB62E5F912590C3BD8D2F
+:10EF70007792EF935C261204FBABB43C8AFD4AFF08
+:10EF80002613B00385FDAB857F3AC7DF820CDF4BCC
+:10EF90002EC023F7EB56F3B14DA14F999DBD5D42B5
+:10EFA000BFADC9134C1A8DFBAA39C37528577E858E
+:10EFB000E72048BB6483FDC9FCED8D587F69DF2CD9
+:10EFC000AC974D9108ECC36A693D94578D51E73574
+:10EFD000EBF71647E2F7BD148E03B09F4970C40CDF
+:10EFE000C09F7560575310EB14E6DFAE7310F4AB9F
+:10EFF00094EC53EF1345DC76A39FDDE3B2B15DC221
+:10F00000FB9CD20C81BC2CA0AB267E7B7F866F1D27
+:10F01000AC571147BFCDE97B2083E597E5009E8281
+:10F02000190C9F51BD38AFA73E4F78ECD0ED680763
+:10F03000FD85F8937BCE370BA9E2EB73F979CFB955
+:10F04000FCBC27C8E788463EC7976BE2F2CD223D5D
+:10F05000E50DC4E59BC5F78BCF378BA8E41A5BFFA2
+:10F06000E9BAC518D7AEA77CBE7458171FD610FED4
+:10F07000B73EF6019E6BD961447F5A0DCF33ADAFD9
+:10F080003E85FB947A3827C3D623CBC7E6F71CD43A
+:10F09000D0FD1FE6DB86D5F9A8BB7B951BFF77FC6F
+:10F0A000E4FB843CE0EB51CC4BCCA3A65D62EB4788
+:10F0B00003A776DFABF5778B7DEBD5CAA5E3FFC35E
+:10F0C00072E9AD7F935CEA1637E81B4BF2FE1BE258
+:10F0D000061F795AD3C095D822317E1DAFB3FA5896
+:10F0E0005C52C7F216B4F15ACF788C430A3FADE9AF
+:10F0F000795D68451EB6C7386CEDC144CC23A8F6CF
+:10F1000054A39DAD8D4F2E207BC60309FE428EE396
+:10F1100079AC7F351F806476E603E47DC77C0063AD
+:10F12000E677884FBE6CFD343510C727E545D460BF
+:10F130002FEA3D5FCB99C9F82E81E78D989420B1D5
+:10F14000C7F5EFAD5F7626CB037B99E7193D9A981B
+:10F1500080E7F65D0676FEC025B37CA8332E7F6E71
+:10F16000E608D0038C8E3FD97F0781FCC29FE8C39D
+:10F17000788E3E586BF582FE127E2631FE83DCCF00
+:10F1800072B5EBA724F3DFBB7EBE4D6E5C2FBE775E
+:10F19000B5F1B5F5140771EB4ABB0E7AEBD79B5C62
+:10F1A000B935D33F2113E5966F08C629AE521E2507
+:10F1B0009450790DFA79AFD103FB05133F2743D65D
+:10F1C000BA55FBED598F66A3DEBA6866FB07719EE0
+:10F1D00047CC7F66AFF8FEE7ECBBE34EFF6C98CF01
+:10F1E000E9321F9E07782891E995D84E9617A43DDD
+:10F1F000D7A2D527E25C86F8DE7DFF667EF8AEF208
+:10F20000B4497CFF5F94A754BFA27FA5D7386CB7E1
+:10F21000FE419E9FD9E1E3F1293CE720E0AAEF609F
+:10F22000F9748F674A2A7FF37D5CFE9FCCF4B501A9
+:10F230001D2EBC653241DCB3A484C9CF3ABF15E3AF
+:10F24000067561964753B78CE03E5F9C5FCD4B0FD0
+:10F250006C0139F5D0DB56BC77B46EDFD6967CCC2A
+:10F260002F08A05D77E92DF6FE445A601B8C5FBF26
+:10F270002CAA8A4F947EFDE9AACA128417F7E90ED8
+:10F28000A3FA5CD0914CB6FF16CF439DF8A5FB12B4
+:10F29000DAEF4235CBDFAE77F86C659857C0FCDF0C
+:10F2A000099E0EF45BD7ED452541309914EA1FCC39
+:10F2B00042BEA9DB5B568CF70884CDC578FFCC3BFA
+:10F2C00056DC5F5D782023A463FEF2FD006F624987
+:10F2D000E826B02F73E977C0FF7D61CF4DC5E80FF9
+:10F2E000D4AC3BB1DE3ACF83DE650A35495DEB71C4
+:10F2F0009D9EE947A1D77682318B79153C2FB07D51
+:10F30000129963ED2A5B1DEA7CC90519E376023C7C
+:10F310003B33591E8988A3E799E8EE33BF3B1FE6CC
+:10F32000F138FA249EFF4082A6AEBC87FC6F8FA303
+:10F330000BF84459C4D113AE30FB36DF6640BE48EB
+:10F340006C61728350BE00FB7A4CAC632C9CC3EAA8
+:10F35000DB161903F84A06F463FE69F4C743215E1D
+:10F3600091AA8C8178C596A5C30E9B1CE03FEAB894
+:10F370000E48E369B595C3D6322FDD7F06F59ED2E0
+:10F380005008FC5FFE073DCB535C9D80FABE2DA765
+:10F3900006F3142FBD6D549DBFD13E8364850BFCD5
+:10F3A00044F92DBFC77841E25EA9C7FCD37E60F463
+:10F3B0008F60EDC1EF94D8D2111C097E9487257619
+:10F3C0007723855E72C1FE5F91C1EE98B58F9DE394
+:10F3D0009ED56A2F37A13C9558BC658C03E5A4B235
+:10F3E000FA6619F6674A23C17BD2B2B2D839817E58
+:10F3F0006D3619E8FEEB2F753DC6D112B2985E85C9
+:10F40000BC374057AD31761442FD22FE27F2DDC4F1
+:10F410007EA853BEF2FBC4853ED2DAB1DDEC57AE16
+:10F420008F3AED780D1FF7D64FF0B7E0E75FEB09A5
+:10F43000DA61BF964C78BE4BF075B3C8DFFF92F926
+:10F440007173793ECDA9357F1FC2EE0F14F1931071
+:10F45000CB83D247576522BEA2D70761DE7BED7210
+:10F460005D11FABFEA709CD5ECBEB3DC963E2B462C
+:10F4700096C0D3460005A70E2CCC857519A47CD068
+:10F48000AF073E3897C9F29694D5094837E531BCA5
+:10F49000D99928F634A49BF204A3CF69CEE7227E43
+:10F4A0002BFC94273303A3B39C71E7B2965AD8B9C7
+:10F4B0002C7EDE3771E9DBBBE1BCD316EE2F3EFCC0
+:10F4C000D220FCDD85CF572B12F88D3EB757E5C211
+:10F4D0007E6F1CA76BA2D2416CD678FE3C8CF9B231
+:10F4E000F90759DE9FC2EF4F52563BB6023EBDA907
+:10F4F00001CC0BBEAE39823F59F092ED34C6E5A87F
+:10F500005D84E79FCFED97845DA4D28762BFA6DDBF
+:10F51000874DCFFAEFB5936667A9F71557BDBF22A0
+:10F52000EA7D66677BB16FD4EE2334FD7BB37F88C1
+:10F530002FA8CA8BB99FE7450BFD9EC165A3C8974D
+:10F54000E93CBF4C42663807910CB9AF4CAF63DE63
+:10F55000D07AC9E2053B499B2FD499C7431AFAB325
+:10F560003C9286A1EC5E8A866BE029F289CC904FB2
+:10F57000129FB79AC8F281CC904F42DF37F57ADEFE
+:10F58000D9D308DF6FFB914D9C77667EF64AC2E3C4
+:10F590000CDBF03C74ECB62C3C5F33B692F9EF52C6
+:10F5A000FC0619F8F2F9AF743E90BB31BA6EC1BED9
+:10F5B0004AE9EB7383BD65A6F590A7D279DEB98AD7
+:10F5C000F478DE59E43389F86E46FF7512E89FCE71
+:10F5D0003C93FAAE73D0F0DDB6451EF40F77E63DEE
+:10F5E0007D9FE03CCB859C31A9E997E463ED92A631
+:10F5F00019D0CE4893033B318EB7B1C38CFE8AAC91
+:10F600007CE4ABA69121BC3F37A5A815FDAF2B53D9
+:10F610007DBBB24674F18F808FAC67F3BF0CE7BC43
+:10F62000A4AEEF5E9EFFB71CB0A7CADB8D8C0F3572
+:10F63000706CECBC6F857E873E0F6531FA7B35F6CA
+:10F64000AD781E12FCCEE5B0F87E6FF314FCF86DB9
+:10F6500076BB96BF82E59C3EEF99432C5F49CD5F18
+:10F660008797570E3F4D65C991E57E7C5E364B61AD
+:10F670001DE4159963334002FE38BBFE7B700FC753
+:10F68000E5C4580EDCE3F178CE6DB7C23D1D979D01
+:10F69000B1F7A0FC4CF643ACDC2FB605EEF568CF15
+:10F6A0004E6465F85606216F6D926E0D5AF11EADCF
+:10F6B000551DA09F4A34F9299AFB07208F12EF4B62
+:10F6C000B0327AA6F33C5652C1ED77882CD17293B2
+:10F6D000BBD80BF90756E2D9DB01F55946764F0145
+:10F6E0006179534DFDF2589E03E77792C5FDCF2413
+:10F6F0001A04FE6DCAB363FF4E79BDD7C8E34EEC62
+:10F70000FB279E63E7CB447E2E21B66CB07BAC1EFC
+:10F71000A22A8BFB3B8862CB86F3FA4DC2AFC7CBE4
+:10F72000EF5A027FCF8AB38B4E8CBBBF087FFFE3BB
+:10F73000F907FBC27C6F34A8EF4F16CF65394CFE3A
+:10F740005EE6F70CB659024A362D9F4C98311EAE34
+:10F750006E9D965A66B0A39DB65307F2C8C9F9C20A
+:10F760003E95C167AFF04BF0BB1BE29E3F67404147
+:10F770007F0009B4E9407F3A4FFB310FB0C614CB8C
+:10F7800051F2C1AB1FB065431CB0EAFDFB300E98CF
+:10F7900071E23DC8DB38A16F1D9B04FA228FDF03A5
+:10F7A00041377E415A3E9A998BFBBECE7B41FB4945
+:10F7B000281F264E65E7562790B082FE171B3B4751
+:10F7C00035BE24CFDB44BF3791E77D8C3FE94F0244
+:10F7D0003FC0F83BA20A8BB7C494F83C0BF1242E2F
+:10F7E000BD277E1DDCE4892B13B84F585DBEC5AB29
+:10F7F0002EDF3AF2CBFEF1E564E21B04F37C518A82
+:10F80000E239E4E0286263F362F9843FE3FBB64146
+:10F810002E62CA857C478714847DC1A01732308E42
+:10F82000F2C24882E5B41DA66DA6F8F93F26B338AA
+:10F830002DF7738BDF0D823AD0ABCFBF9586F84A98
+:10F84000B3CA284FC1030EFC569A69B2807CD771A7
+:10F85000392FCE6D8F4B32E17DAF4D8BD8EF0D68D8
+:10F86000EFBB6CD2DB0E011D9B3EA273A0DFD99EC5
+:10F870006888C849402F420C8E2E792CF807C6BBE9
+:10F880001EF87E04FB5D27CAE57DE3EF1B6F723235
+:10F89000589B7EA4F0F81CFB7D89C2CEDF9BA0CBD9
+:10F8A0008EB6079B92E03A61F1B16C314FA2F8A09D
+:10F8B000BD9B88323B9F95C6CBE29E4D42CA14BC8D
+:10F8C000674712ED1AB1FC246F27B5BFFA57E08FD6
+:10F8D000BE49743EF4D994CDE4C453F289F5C827E7
+:10F8E000D68007F8C49BD0F379A1BA6CB66EC62552
+:10F8F0008D7441DE4093DBEB02BB4AE0A7F33D1F72
+:10F9000057D48BEF79537B1EB7898F1BE6E78DB5F4
+:10F91000F53FCA66765BE7F87A3AAEF51BBEEB5464
+:10F920007FB7ABBEB77EECBD688F3F07550AEB8C47
+:10F93000E16D02CF732585EAFC1432D26B62F25E70
+:10F940009D8F72A3B4CC0DEBF326536D7B94F67FA1
+:10F9500095F3C98D72E0338837BC3AA3E008ACCF89
+:10F960004AB8D09E8E733389AC0266B95C16F889AA
+:10F97000BD0FCA8B75208FEA7481FE29B47C51DFDC
+:10F98000DA77511EAEAF27B34774874FF061279CDB
+:10F9900094FF80EE82FFB4700B3E20DF0B6342DFEA
+:10F9A0006612C1A78BB03C6AAABF58BEB427BB6B16
+:10F9B0005E9439C79B1AFA827E7FB53188F2E7469A
+:10F9C000FBE39837B63337B00BD6FDB4A11FE33D48
+:10F9D00039C45585F6168577F7FF24BC745DB9E107
+:10F9E000BDB00385BDD72D7FF823832A7F58C0A7DC
+:10F9F0005DC7028E7AC2EE3F1ADBBE15EDBBFAA9D7
+:10FA0000562F9CF3A887BCD8128C7F619EF101BE53
+:10FA10002F0B4A2CDFB79BBDD87B9E31BB0FA0D6E6
+:10FA2000C6EEC111F729DD9B2FEEC9617053F9C5F0
+:10FA3000EFC9C1725B9507F77F9D76E31C6687DE91
+:10FA4000506069867B07BBDF97C3FC7BE405A38717
+:10FA5000DB89A8BFDB12D9772E9A595E7B9C1C27C5
+:10FA6000525AD73D5EEBF4CC1EBC949DC7E278B2EF
+:10FA7000B714E8B111E256BAEE7EC8CF9C818F81EF
+:10FA80004FE614F972E0273D6619989F91F2D5A6CA
+:10FA90000E02E9710DDBE17ECB9B48C39B721FE434
+:10FAA000AB2F807FA60DFA98DD7BD9C55757185F1D
+:10FAB0000551087EDB3A7D2D3520E58CC03CEF7783
+:10FAC000EA4A20CE6844FC8BFC43EDFA8D83E7B410
+:10FAD0009EC1E3807B75293CE61C677778AE86BFC4
+:10FAE000E3F9289D303EEE8DCF21CF3F7158179F0F
+:10FAF0002793800BE0EFE4F755DE165D9F1EE0D6FE
+:10FB00005991EEB74F67F198FA0466A7425CC69D1B
+:10FB100006FE27F6FDDB5733FEB8DD6C447E99D434
+:10FB20005E8BF11752C1E2295EFA3F80671AF18DB0
+:10FB3000839FE698629B84E736A74E54C75BA699DD
+:10FB40006EC4F8CE6D84F9D36E9FAA57FDEEA0C0A7
+:10FB5000C334B2F663C8E798A6F9BD412D5EB4F18F
+:10FB60001A818FA691DFBCEEAFCD4974609CD8435B
+:10FB7000FA7FC7B84E790ECB9FBBAAB8CE117D0CC9
+:10FB8000CFEBBFE29CB769115D17FDFFB308EFE94A
+:10FB90001E97367FFB63B4FCD38D03B1FC4ADA5D5C
+:10FBA0004B4E40FD96022C57C81FCFC07BD34BA7AE
+:10FBB0004F80FBCD8F98D9382E4BA00D7EAFC2352C
+:10FBC000247F186CC92A0C316C77F3D0DAE19007E6
+:10FBD000536161E5E3C5FF6B1896F37979D88B0320
+:10FBE000A17C44FA78464F71A1418552047E97AAC0
+:10FBF0002285B59F386C6706F8092ACA597990B7EB
+:10FC00006C751FA8973F99D1933E6EE0F6B1B0B7DF
+:10FC1000FC7CBDBFE07BBF19CE87F9AD9217CE0546
+:10FC2000F847BECFEEC732B13C02BFAF5881FB13DD
+:10FC3000CB7DCCBF37D6DAE806F9F7BD80A104FC4E
+:10FC4000B8366B5E33FCBE40F2C8B21140EFB1D49F
+:10FC50000C03FD47D7D5125C57D77C9C93847688DC
+:10FC60007A5D09BE9D24D653857ADD5079F04346EE
+:10FC700047F57AA0E32E87F7D3AE55EBA54EF9AE44
+:10FC800059B75A7EEC55EF13B51CECD44FABC2C834
+:10FC90009759849DFFD90C7CCAD66F2BC061903BCD
+:10FCA0003CF03E57F20EC4C48A5EEC07011F983D3B
+:10FCB000645877B8E04F11F62283C0664B83EFB2E9
+:10FCC0007ADACF073F2226E0A2DF0F217E56317875
+:10FCD000364B0DFC7729985D2EF6BD7562BEFBD4C0
+:10FCE000F32DB5B073EC2E42E50EFAEE8B077E13C2
+:10FCF000DCF55CCF4E35F91F36D239DC669F857452
+:10FD0000BE83049F03FBA6C312F825D05B27070F11
+:10FD10004625F85D091FC693291D7F9513672F0897
+:10FD2000B8B4F8A8EB45AE6AE1D6E2A18B3E1D68F7
+:10FD30009FB9F9EFCF75CE4B339F267EFF7CACD8B1
+:10FD4000A8CA133D5EC5F260055CC72552887A5289
+:10FD5000B2601CB5D3EFA4956FBD9C6713FA59C070
+:10FD6000793F3F4FF585CCE4DEFDBA08C2995BD9F7
+:10FD700061063C7E92C3FC2E02FEA691416C679008
+:10FD8000A51EE3C49FE4C8C25FA6A2B7B8D74CC4FF
+:10FD9000B9045E1D064F16E67B6AF039D364EC3970
+:10FDA000AEAA8DBFF6D24EA2F8CB4CE98E67112FCA
+:10FDB000BB45EB87BB89F9A76EE17EB8B1950CFF17
+:10FDC000294B1371DF965272422183BBEE5D16F40C
+:10FDD00078C711F82A07E316D111E027787DC44FC0
+:10FDE000314E24EE37D4E2C792DB337E7A5B0FBD0F
+:10FDF000C1FFAEC56FCDA5E35C943AF01EB4BFBBA6
+:10FE00006C7CDC401EAC17BB2DAF0CFC0B54AE7EE3
+:10FE1000FD356C36A10AE8E70C38729DB03EFCE374
+:10FE200020F73AA532A067FE7982FEE1C57C9F38B3
+:10FE30008EEBF74F76B1F3F315BE014F8E01FBF356
+:10FE4000989E843C90C7CDF0F3C9261DEAF579AFA2
+:10FE50000D77817DFE01E7B7FEEB65D5EFD30D0889
+:10FE60005954F76C0CDA91A22A0F0E67A8DA0FDD4D
+:10FE700097AFAA2F8E0C54D50F3F364C551ED1315B
+:10FE80005AD5FE9A93E5AAF2A8E80455FB6BCF4E2B
+:10FE90005695AF8BDDA9BE2724E8EB284C83FBF9F0
+:10FEA000193E6EB83253D5FE7CD2F863B0EE66AF21
+:10FEB0006579DB6564A1AAFF425D0DE64393566652
+:10FEC000C734D0FF213D75772B982746EDF754C0F6
+:10FED000DB7AB59D53DDFED82A90B5DDEEA7D0D8EC
+:10FEE000335AFBA5BFA30AAE7726B7E6F2BC936BE5
+:10FEF000C835FCF74AB474C5F3FE9FBCA9C37DC4E2
+:10FF0000E2D7987DBF7837CB872B20FD92F11CD8A4
+:10FF1000311D094970EF41C3BA3152971DA3C58BFA
+:10FF2000D1A5A6B3D9A3A67342A19ACE895E359D69
+:10FF30009347AAE96CF7A9E99C5AA9A6B3D3AFA63F
+:10FF400073FA34359DDD01359D33ABD574CE6E50DB
+:10FF5000D33977A99AAE79C105AA7A2137FBB42C97
+:10FF600056BD6F92C2A5545292D9FE6ABCEFA15FF2
+:10FF7000EB0F7BE40F41FF20FD1F5BCF0D985F3F30
+:10FF800097D21FF2EBFF42D61E855094960FEAF6E9
+:10FF90003D8671B5EFCA078F6AE97F95F629D58747
+:10FFA0004F803CA176CC7A900FD3FAF37D87BF6760
+:10FFB0003B46C8AD78BB217E5FDD9B3CEBA627F9B5
+:10FFC0003EBB573DA9D967BF05D94D688FAF45BF27
+:10FFD000D674CED79FC2AB51E0577D16F5FF5B14A8
+:10FFE000909114AEB7006EFA9DB72C83D00F7217A4
+:10FFF00089E8F19E6BC8DCD4E17D9998875945ED7D
+:020000022000DC
+:100000007278CEE2F6C11CEE27F9CA183890CBFC04
+:1000100023B969F0DDAC0E76EEEB78EA55DD0BF135
+:100020007BF827F8DD73FD87619C0A9367C913F499
+:10003000D561EE7F221359FE2751FC83E3EF61EC7B
+:100040001A87C54D5F940201DC67BB4D5ED8670F10
+:10005000CA242637E83757281FE25427347A652008
+:10006000E791DD19E1C576C4572805E304DFF1BB4C
+:100070007FCAF59D047E10EDBF6DBE06437811F377
+:1000800027B0DF4B7993D3E5A9DB8D11D897093ED3
+:100090003A9930E3A8D383FEF033C86F77DCB40A13
+:1000A000CAD2E154CF620ADFE5AA28EEEF29FECFDB
+:1000B00001DE6A4C14FF748A17B303FD938119FCA7
+:1000C000A9DC49E91FDCD3792401CF58897DFF5D84
+:1000D0004BE05318E7B0DC91E3057C281D786E8F68
+:1000E00058D1B821170D3DFB03051ECA13B2EFC648
+:1000F0007B788D462FEC2FCA2546D7D3A9F7CC8025
+:10010000D8E21CD99F16D1A9E0963C00B7AD2AD7FA
+:100110004DF9F1FF00AA42FBD90080000000000069
+:100120001F8B080000000000000BE57D0B7854D504
+:10013000B5F03E7366CE4C924932492024848499AE
+:10014000843C20214C82202AE2F0088D1A30BC1415
+:1001500030E2E401843C2080DEC6963603E1A5420D
+:100160001B2C2A2ACA8040D102068B801AEC206AF6
+:10017000F16A356DB5A55AB90950E54D0C3E68EBED
+:10018000ADFF5A6BEF9D9973480AF6DEFB7DFDBE0D
+:100190003FDEDECD3EFBBDD6DA6BAFD7DE73DEE2EF
+:1001A000CD8C561963B6DE8CDD00A9D999531CC9D4
+:1001B000D8B7F8774B3065CCC718546954E09FBD69
+:1001C00020F723C5BFCDC5F81FE4F7FB62FC0F4144
+:1001D000DE6ABAF4C114C8770C36B9B740D1C6701C
+:1001E000E83A9FB1F7B11EF4FFB405F2B1F47D35E2
+:1001F0007E4F08E7ED131E33F91BA17DF198971789
+:10020000B2EB187B76BEDDADC258A5CCA931985FA4
+:1002100039F3682C8DB1BF8CFEFBC1362763FD9D81
+:10022000DEBECE618CDD1B674AF980E6E1CD9E041F
+:10023000F36623E3184BBC72FEC67530B6C6C4869F
+:100240003336D9C197301BD705EDA6308F05C79936
+:10025000C6BC161CF77717340F8B82D404E530DF49
+:10026000BB988FBECF607E4AEF6601AA7F0F6BA35B
+:10027000FC6F237293EB617E931ECF4C67D0E662D6
+:1002800069DB702CFF87D5EB76C2B83536EFBDBD84
+:10029000E0FBF964EF677D10EEEB39DCAF36DF4948
+:1002A0000A87DFC5FEC52370DDE36CCEEBF2521981
+:1002B0007BDDC42A9BED5036AE37CD9F991DE99367
+:1002C0000777D7CF32C6A05D6B67542E1B82798F1C
+:1002D0003D11D6FF3D81C2EF79AA8B709D05AA9D85
+:1002E000F502F8B73A55BF15C62C1C5DDA17D705CD
+:1002F0007F913EC0D3448FCA10CFBF5E0A5FA0DE9D
+:10030000AFF3543FD2C4C40DE34F63FBA2D1539665
+:1003100047C3FAC77FD3765D00D2C27E96E36D599C
+:100320007C8C6FE17F5FB28DE36220BD2D618F9980
+:10033000C1FC6F1BA02F2FCA81BC2D989FC8CCC1B8
+:100340007218F710C201E8A7FECF79A3DE0869C7CB
+:1003500058935A0CEB2E7146F6FA3402B283D8A0A9
+:100360006F71DE6A49B4D7DE337CBF6E708F7A035B
+:1003700068F276C553EE24BA706A48FF6566E6698E
+:10038000EEA6DDAE7445D00F60379EB13BC45C3B3A
+:100390008B2E691761BD4F3ABDF3B19F4513FE32F5
+:1003A0000BD7C7CCEC3743016EF3DF03B841F9F14B
+:1003B00006807C2663271B6CCC6365ECD30607E5BF
+:1003C0004F3524507AA6C149E9B9862C2ABFD0E01E
+:1003D000A6FC2167F1F7B1DFB2D59F9BBD398CAD8B
+:1003E0000A9378E4F3582CE87855F2F03FBA61BCF0
+:1003F00055EF5A285FD9DC341EC1B138F9F8B2087C
+:10040000F8BEF839C58DDFAB5B3C9A1DE633FB0DBA
+:10041000EF4A249FB9EFB64D04F0B1DACB0AF3E20C
+:10042000161A50BC02C71BF6E1C97884DF670D239A
+:10043000683EA71B3C341F4F4BFB5B71D0FE6C43E7
+:1004400021E53F72163F8CF53DEC730DEB4FD8D98B
+:100450006E4E82F2028FE2C1FD3DCAC3FC7EC0DF58
+:10046000068BD78B74B321D1E6C6FD3E7AF0E4A7A4
+:10047000EF83713FE9EF7D14E97A5A6C79411C7C76
+:100480009F38A2D48CF5EEFA8631CC4BFABEFABE78
+:10049000E6F0A8157839FF9A42703ABF2FFB8E9B81
+:1004A000A0BFD78EA84C8579755E36D1BC3A8F86B1
+:1004B000FB9912ACB7E82595E87AD160CDCF5C986E
+:1004C000CFEEC372709DD019AC3F4B71B27AA0BF12
+:1004D000B3BBBE9F807890E39F8D6DFEEA23E47BE3
+:1004E0009F70BEC758F3A74F225FEC97E07E08725B
+:1004F000172C6C3AED5356173119E86BBEC6BC3C4D
+:10050000EFCDC6FCD970766F31E487EF4E1A83FBCE
+:1005100008C7736606F95AC6EEC7537FE80C8EB754
+:10052000A379F6474F42FEBCDFE4B34443CA9A2F97
+:10053000BC827C79ABDDBD8DE13CCDE138CF872D30
+:100540007C5EBE6DE1EE6D4EECCF4F7C00CA352C6B
+:10055000AF79F189BEB88E5701062320FFEABA08A9
+:10056000E277AF5ADCC7EAB1DDD3BCBF9FFFE481BD
+:10057000E307305D5B9BFF00A4BF73C612BC2B1E5C
+:10058000993708DB6727017A803FFE62BF1208CBEC
+:10059000656CF0FA43CB1261BC211BDB4D7D21CD94
+:1005A000DBAA34629A9D5C784485FE8F3A9D348F35
+:1005B000A13B5D6A126ED7BEFE8F6E4923C02988AB
+:1005C000BF41027F39EB3F1FD317D25D7D9B17C51B
+:1005D00040F920A5F9CC5217D2F91FF2BD04BF266D
+:1005E000EAE7A59629BFBF9BE13A7C89369C77A9AB
+:1005F000E6A6F309966B81FCF9BD699B1F8235EE77
+:1006000033F936D3F95566736F43BC17FB9E407CB4
+:10061000D7427D1FE46BF37C51374279ED2703DC31
+:1006200040512CF999EF15223CE6EF7D747C5FA8D0
+:10063000777E24730309B0CA972E8DC7762C993123
+:100640006409E7F736C6CF84760FE78C1986F45530
+:10065000AC36D3386C011FE77171EEB136004EBC79
+:100660002055A8F7307CC6EFB12D31879258103F46
+:100670000B5A96BACCD0FE3AAFCDADE2BE71F912AC
+:10068000EBECC17314CEBFBFE17E4BD444BF8E29C7
+:1006900029C5DFE1FCD3C47926FB7B5C63BE30E86F
+:1006A0002719BE2B783E6BFCDCDE067CA53E3F782E
+:1006B0006EC3B8E1AE61D4DE837C38090EE93C98A4
+:1006C00067D2E3563A07AE75FC8B16FB6A05E876EF
+:1006D0004138E76363C4F93B3DAEF1601BACF760A2
+:1006E000B837DE05F5668B739F99DD4EE4EF5BC38B
+:1006F0003D7D70FC1A5B470AAE01CED524CCCF57A6
+:10070000BDFDE3D3E85CD5C933579B476BB8C785BC
+:10071000EDAFB5BE91DF2EFED2C4F2800E163F6A59
+:10072000257ED1887C19D6D51839DC867C83BD61BD
+:10073000AA790BCED99B79CBAEFE1647E6135F693B
+:1007400064AC5B78BD06FBDF0BFC2600E78417F882
+:10075000C0A8CB1D2AA7F7D6C3D1D7219F659E4835
+:10076000A09F5B2E9B9837E41C34F603F8F2201C04
+:1007700047B308E60D39573D2C46C37DCBECB1FF9E
+:10078000DABAC5FC470AFC8DEC3C1AC1EC080FF83C
+:100790006EEF795D07C5BA7E85EB82747B7AF16472
+:1007A00084FFCD5F38CCB8BE9BCD935250AE8179DB
+:1007B0004FC7798FFAC2A49FF737E1BAFCB5CEFFD5
+:1007C0007E85F94CB81F3FD7FCB81F5BF078043822
+:1007D000B6CCCBF1E3BEDFA7F1BC2F4A23B9B625D7
+:1007E00092F9908FB44C8AF7FB5CC80F19977B7B0A
+:1007F000335E1E26DACF88A7F67DAD0052E4077778
+:10080000878BFEEBDE198CE54B93888F345AFCAB5B
+:1008100053B1FF1FA9C4878F0ABEBD3E2670B70A19
+:10082000FDAEFF3C9EE13847592069018E53194EB9
+:100830007CF72693E9DE4976ACE7498C0578EFFB37
+:10084000874AE7C4FA3CC8DB896F4F6F86EFEB2716
+:100850007912C3B19F49F1269A8FCAEAE8BB8BB7D8
+:10086000FBC8C2EBCD14F8FA93C00FEC6BDAF7DEDD
+:10087000891166A4DB4DAEB247683F304FA202F348
+:100880007DB2229D21DF9C5975AB8BE8A5E971E211
+:100890005FD3050E647FD8C0361CE566FE3763F66D
+:1008A000B630C4E7B4CAB0763859D9D1CA65914ECA
+:1008B000683FCDAB06ACC04FD9D4024F975C978A46
+:1008C000E37A68DCDAE681692743E8B9CC0A7C027E
+:1008D000FA7F21CCFB04CDEB401E951F00A1E65B07
+:1008E000D84FC72BD277E3BE621571427F0994239C
+:1008F0001E5EEBB0919CDA133D3422FC87083A452A
+:10090000BC2CE17807798DF28DD307913EB3C9C233
+:10091000E9C6B7278CF05A38D94678EE9C1EBED966
+:100920000AE5F70ABED5383DDCA340BDC697AC7ECC
+:10093000938BF424AAE73B1849FDD6683C5FF36229
+:100940003AD1D33ECDFFDC762C7F2D8CE8A1268AD0
+:100950008F5BF34A92A0378F6B058E7BD04A745021
+:1009600013EE8CA6F2FF8C233A1967F3BE82F000D7
+:10097000BAAB4339A2460B64C4007C8F09BA3A066D
+:100980006D107FBEBA489A376D79C87B1B93B7202C
+:100990003EBD1A2F673F50A9FC98838F7F6C0D1FB7
+:1009A000BFE4A7D5EF32C0DBB1E2F189B3611EC766
+:1009B000EA22486EFC73BD1AD0A250EFE9782C03EE
+:1009C000EA5D587262F806987FDBB28F53903E4A18
+:1009D00096D51661BB92AA2513F1DCEC695F96D41B
+:1009E000C0E60FD9C7275C9EDFE17ABE75793FC4A8
+:1009F0007DBF20A76D0ECACF17B4D66750FF888D74
+:100A0000F31EC5EF175FFE6C3B97AB3B32F03C9893
+:100A10006FE6F421CFD50582FE56A57A8FD1391124
+:100A20001E9885E747444E2BE7774BAE8DCF9F69E5
+:100A3000D9B64F8171AAC35BE653AAFA73B19FB3CB
+:100A40004A204A4923F879713F9D7304A210EE5E53
+:100A50001397E7AA77E8D7857F66985735FE03DABC
+:100A60005537AB9E30C435F36B38FF6AA605EBBB38
+:100A70008278827E084FCCFEE7593F04F8573D3715
+:100A8000301FF587EA98033FB989EA413BB94FD453
+:100A90002BF3723D57CE87AFEF9CA0FF7392FEA75A
+:100AA0006B529FA7F12FBCDC87C63F3BC99F81F0EB
+:100AB000BFA0887ACF59793DA00633CEF3054E4FBB
+:100AC0008F597CA670B20B30A2E7EAB8E6E10817AE
+:100AD000C987600E3E13D43FBB3B89EA4BBEC58A33
+:100AE00019C376D5BB13B770F94CE8B33851A85F7A
+:100AF000F50BDE3FE6711F9E793E498CC7E5692301
+:100B0000FE8CEB4D4E35D17A1F93FC3B52EE737742
+:100B1000C224807FE6064D57FF42A476AF07FA1D38
+:100B2000E8D77F97FD0F4C55483EEB6FC05B5FB534
+:100B3000E39015F7D3B38CF6AB715EEE54AE373E4F
+:100B4000FF7C179E548E371003257D38B91C6E41EB
+:100B500038FFA90B1FF725015FAD4618A406E1B3C6
+:100B60002FCF9B84FCFF02E6F15C88817C0ECA419A
+:100B70001CDE322FE16CA4B3657F9A93D406EDEFAF
+:100B800046F810BF77F7417AEC925F2CA08FE4A073
+:100B90003E5A39F4643AEAA97503E128E85ACF9C31
+:100BA0000D7936DC4F7337E6D9CA42F0D0B863E826
+:100BB0001127C0F9DC0EB31BD972A3D9FF1394A778
+:100BC0001B77A8CD3E46E53684EF39FBEBEF61BDE0
+:100BD000391B63F2515E96EDE76EB87F604508DC25
+:100BE000B377E8F130B8599F1F72409F9F8DBC6169
+:100BF000D8776F9717D0E7871ED1E75907600BF0BA
+:100C0000A0DA389EF68F701F71029EFAFB55377E70
+:100C1000EA6F9F3C6502CA171B55773A94F75F52FB
+:100C20007CFB60C89FDA38DB8D68AE547DF37F08AB
+:100C300038ACFC78FC113C0FCFB2E63F4C003CCC0A
+:100C40006959A7999DB86E3DDDEE33097A7D9EDB2B
+:100C5000D9E6F9F5E557EEEBA5028F2C2B949E8C87
+:100C6000788771EFF4C0846AEA170F3D094766651B
+:100C700011103AC0EC86E6751ACA6D571FC7C7E552
+:100C800041BBC789F0281DC1CB6EAC1FCB4E0C8574
+:100C90007FACF9ED789C77E9C30AC90DA5BFCC7C80
+:100CA00003CF81F63D336EA3F4CE425ABFB4E7CDF5
+:100CB0006D51029190778C701E688376B3FD8A1B0C
+:100CC000E75DB6DC1AE467F0BF8A358679AC0F2998
+:100CD00087F9CF3D70E8AF0AF45FB951DF6E1EF0BF
+:100CE00059E45F555BBFB5867E977AE38D2D9B55A2
+:100CF0005CF76C397FDF2886EBBA915765BD847C41
+:100D0000731233706E4CEB5DBC2315DBADE7ED80E9
+:100D10005D96E27A6BED9A13D75B6B63810898C797
+:100D20009148CDE380EF973644921D6D8E15E4C94E
+:100D30007C4A59583EB6734763BB4FDFE7F6B4DAD7
+:100D4000388EEFDA4D0AE951B568FCC4FCB33C3F7C
+:100D50008F05681D48279ED0F5F9F579D6C4F5AF03
+:100D60001A73E010C2A38AB571FD09F0E891F0038F
+:100D700078D5C03A8FC6A2BC6568CFDC5E1C77818F
+:100D80009DCB4F0B0E7C6B0D2D977AA0D453A57D78
+:100D900077534671388EB342F13C618379AE10F2DD
+:100DA000B56F5D18D1EFCCCDFCBC01393603E1B293
+:100DB0007E5DA21BE58C99209787E1BE99174EF5C1
+:100DC00040DE25BB4C07C8D55B5C58BF3980E7C601
+:100DD000FA475D244783FC4B70E9581BE6DFA2A06D
+:100DE0001CCCE598F5EB32490E7F559E536BB9DC70
+:100DF000D58D5C4CE5AC0F97E33FC2A584C8C15FBD
+:100E0000F4F67E9ADA3BB8AE8A659E443C772A2691
+:100E10006B26B457B1CAB86B921FB60939B203D664
+:100E20008FEB38A914BF650A9147BF16E7C8F031A8
+:100E30009EEDA29E1BEB5598263D740B8EF798C92C
+:100E400089E375C1DBE3C9C0799C5C17968F743662
+:100E50007C0CB7171DCBE3FC3DE23AE6F1E3799A4F
+:100E6000C6FB6569265D9A100EF407FD9C2CE0F622
+:100E7000EAC8EB8AC94E076735F179E33AECA29FDD
+:100E80000AADF83F6FEE663E123E6C1C97174E2E71
+:100E900054B6F079017E213FFC9130B2EF9D14E70A
+:100EA0008F8433D0CD30B2D30B7EB54ED0CB3A0B3E
+:100EB000A703DF3CAE3F05E985113DAC177AD64C60
+:100EC000815FB696CBB5402F1CCE6B1305BD30F6B7
+:100ED00037A487022797B3AF515F02BC0F48EB7D61
+:100EE000A5DE24F1CDCCFE61FFCC2F52BB7FD73ED7
+:100EF0001F9C9F552F3C1AC5A0DE697353BC1BDA9B
+:100F0000D76C5B11E581F494D917E580F14FFBD5DF
+:100F1000427F37F02E4D9376658F5D01FE331FFFC4
+:100F2000E94479E7E189B8BEAFB6591CC81216EC9E
+:100F3000B092FE347FEF3C92B321DFCEF3AB3E574D
+:100F4000317F406F3FAFFAF9A3F14E82B72FC994BA
+:100F500080692089413A7FABC51D40BBF407AA1BBD
+:100F60008601B9B96325CECFD81EE77119F0BDA0AF
+:100F7000592DD5A2AF2C5F20F8CB82BD0F7F8E7686
+:100F8000BD05067B7DA5F05B18EDF593D2227B7D38
+:100F90009A0DFFB89E5D8F7210C0C51DC07D0BF30A
+:100FA000492732E1F6DEC6E71ECF6D477961EB3B9C
+:100FB000514A4ED05E2FFD199DCDE59B5E71F6BC6A
+:100FC0001F2F08BB6D105F9C6F390F28C80340416D
+:100FD000E7698D25107513C0A366B385F84CCDAEB7
+:100FE00067B73F8974F6272B9DE7D5BBDEFCC38D21
+:100FF00028EFEEB1F42AE2CBB02BF1413C2D707218
+:101000003B99C44BD52FDFD49C83F9F725B141FC24
+:1010100054EF39A4B1C157C2716CF321ADCDDE0DCF
+:101020009E9ADBC7939DE8B9AF35DC07A75F53589D
+:101030001FD795ED2B37BF1985F218C209CF258927
+:10104000AF2EFC19EA43FF135FB98EEA3950AFE8BF
+:10105000097FF97876A05EBE3F92C5C0F8951F590A
+:10106000FD4588D7DD8BA3701D9F99EB389D3FBD53
+:10107000221EE5BA4A8B2FDE4129FF5EF9CCFD44E2
+:101080007F7395BA78470ED177A28964065F22AE46
+:101090006FF6C669B4BE39CC4BF457F9B45AEC8735
+:1010A000F44B332BDCD3CD3EF958F0A5CFB600522C
+:1010B000617D9FA1DD06F9C6EF54A1E72EA4F3FBE5
+:1010C0007EB156C61651FE4B21B7ED4E33497B9685
+:1010D0002D545F5CB075552BE2E74CB2A70FCE13D1
+:1010E000E0E013F052BE857ED5DF16F4E1F8614EE4
+:1010F000F370D10ECED1B1F81DEBB75A3C68F70EA4
+:101100006927F4393EFE7D627C987738EAAB9FC54B
+:1011100073B9DDB8BEB001920FB056164A5F3DED0F
+:10112000FBAD0F125D7DF101E72BF3FD930AA9BC26
+:10113000D512E883E5FE435315E20B5616E86E5FC1
+:101140006FB5887DAD2F87799A9550F8BEC6E5D0EA
+:101150003920770542F671906EB4E0775AF7236232
+:101160001D6DE44F937EB8B9821F18D76DE40F1F31
+:101170001AF8836CCF3676EF070AF2051F8D5B03F2
+:10118000E709CA19357FB2D2B951B3CB528CF039C5
+:10119000BBF3F01F66A21EDA2CF7B19EDF1AF771BF
+:1011A000E58BC3BADDC767D7E475BF8FE17BB7FBBB
+:1011B000788D42FCED7FCA6FE1A423BB414FFB75E4
+:1011C0006E0FFCF6DB34E11715F0FC92E544DF848A
+:1011D000858ED2FE841F035C253C8DFCF3F1342701
+:1011E000C1D7C83FE1EF03160247093F499F8C79F9
+:1011F000699C2E3A96742AE9B88B4E8DEBD5C3D1F3
+:10120000587E18F913CCA7F8650BB79FB528246F43
+:1012100043BBB792AEA37DEAA1E38F35BD95D42B36
+:1012200034EF37E49B0DF53D867CB1A1BED790AF7E
+:10123000D3D5AF397058E3FA414057CF5A7F3BE9D5
+:101240001957CA117EEEF7D9FBB9E643BAE8D7A120
+:10125000215FB42C63BE4894770FAA24EF5E7476A6
+:1012600044A15CB2228CCB6D171D221FC3F31DBDA0
+:10127000B595C817E5F78E306E27B958DC111513F0
+:10128000A2A7B7B7A851688F6DF3B3C2EEEC28647C
+:101290001905B8B6B19ECAB9FC56A0DA53EAD11EF8
+:1012A000DAA4BA814C58C5D2BBA228EEA125ED8E96
+:1012B000E9F07DF6DB2A850F5C0CE77605E6F3980E
+:1012C00031EEA09CA3909D62BEC746C2BACA5B78AD
+:1012D000FC41C51A3D7EE7D8A746079CC877F47144
+:1012E000027351AF4B437D4FFFBD8AAD217AAB32C4
+:1012F000EC0BAFB0D31AF745D900B12FF2589EB01E
+:10130000C7909F6391E0D7056ACE1DD301FE178F6A
+:10131000A8CC0AF9CE1695ADC4F5EE54C8DF830EFD
+:1013200001DC6FF3615FE27C247CCEE1BEC9EC5945
+:101330002E39F7D227C37F8874B2EFE3DCA7203DB4
+:10134000B7EF4F19AF627EFF1F533E6657D61FFBA4
+:10135000DA5F67211FBEF89A95217D5F7CEDD72962
+:101360006817BCF88A95F4E58BCBACDCDEFC5AA49C
+:101370001FFD911793B99CDB78F0EBDC363A779739
+:1013800013BED60ED0B8DCD4F2F76368AFEE6C8132
+:1013900055A13CF15A04ED9F05AF84913FFCE2C199
+:1013A000AF8787C64DFC4FD723FDDD1723D9F41730
+:1013B000916E855CBFE0D51B9E457F6EEDDE435A86
+:1013C00039948FFDD57FE722FFBCF82297932E58E2
+:1013D000DA9E415BE386AD373C624944FB1C74D620
+:1013E00017D0B5ED81C9B84FAE840B87C3458003D4
+:1013F000AE0BE052897CBF2778BCF06F0B8FCF67B4
+:10140000717E763D43FF6F102E0AF723B444FA6DC8
+:101410000AAD9F7F7FEDEB5CE437575BEF6F70BDEC
+:10142000BDFFFF59EFD97F5BFC727A5F3CC049F387
+:1014300033D2FD9574BDFF3F28BF3BD24DF3BDC6EF
+:10144000FD1E91FEEFBAFEFF1B7C0FFCB75DEFD5D2
+:10145000F0FDB6C077A403FD8A170FFE770AFB0ED6
+:10146000EB2E4CFF77DDD7FF7CDD525E1FA3BA8FDA
+:10147000E441FD7758F3076E17491FDDCA1DF707D2
+:10148000E3EF483F1ACBF8393DD6564DF2E6D87E09
+:101490006B492E6E64F9E487F0F553C91F43C117F9
+:1014A00000875F27E4F9C99F640EF45B0CF93149AA
+:1014B000B5149F65D41BC7864F284479F4F0529821
+:1014C00017F47338D2E4405FF1B87E6AC09A4B6972
+:1014D0003BA66FA5DC7E04E5967176BDFE74BB412C
+:1014E0001FBAD5A92F2F642FF642FF59618E85F9B7
+:1014F000613EE3B17E88DE3825DD41F0BA95352DB9
+:1015000077D8BF3B9CB6A5733DF94A38FC73B85DEC
+:101510000127A1279B457D23DCCCF6875AB19D99F5
+:1015200081DECBD74BFAB2D47BAF064F26F469B33A
+:10153000185AC2D7DC8FFB4943FA25B848B87F5701
+:10154000784B3C19E12EE12BE166C4433D1AA37AA6
+:1015500007E1DFCF9C67C67D77B390E3C7996378D7
+:10156000BE5FAB5A4CFBD1CFE9FC0BB719E593D169
+:10157000F6188AD764CEE418D46751C4FC3609E45F
+:10158000CE1131C315586F9299F9ACA06FA20F8D8F
+:10159000ECA80F9AFDCB5C380EB7D7269BB95D1A25
+:1015A00076B72F3C9FEA7B34C897FE6C2EF340FD44
+:1015B000D224E656787D161D4BE1684CC5B82C4800
+:1015C000B15D6934EFB7B40FF32FE3F824BC0CC05E
+:1015D0003495FAF5986279FBA87C6AEF33F1F61E30
+:1015E00033C67BA571FB7AC70A2BE91FA5AB9233E3
+:1015F000907F148DD1DB8D9333B89D59A6AB33F812
+:101600007E574DEE04948BCB960F247D480D2FAE64
+:101610007D09EDFDBB23881E4B57DE336118CE6F6D
+:10162000779C1BA77766E29EE1BCFE8CFB3F84EFB4
+:10163000DE1D61F47D6786F7683AF4774671CE7AED
+:10164000093E944D3BAC25C010DEE649E7D1FE379C
+:10165000D1B7E73DF4334E9CAA52FD898CC73DB209
+:10166000E511E48F9EE0FBDC9C00FD4D006503CBA3
+:10167000DBC31C290B61FEA5C2DE7B52EC17359C37
+:10168000795FB4E3BC923352E1FB04D67D1C706AEF
+:1016900086A83F46D988FEA1FE63B93D5ED6C77EC7
+:1016A000B0DF2C018F8BE9DCEE24F30057AA5FB189
+:1016B000DADA9E867ACF6A4B2013D25959632EE12B
+:1016C0003A8B52D9F80D08F70754B685E6DB514A34
+:1016D00076EEC82C27E2C10B244DF1854D2E27DA7A
+:1016E000BDDA473707D03FD0FE84CBDDE8242C534A
+:1016F0003C8ED4B3DA470706A05DBE238FFB198E5C
+:1017000039DA22513F2CB7DB283E47C6F5CC76F0BC
+:101710007DDEBFB16DEDF5A8773EAABAB7407EF683
+:10172000A3DCEFF217BBCDAFA0BEB69EEF53B6461B
+:101730001FC7C31C6EB2F794378DD650BFACB07BB9
+:10174000345C6776A6372603F7D13700BFE118C7A8
+:10175000C96833943695529C891A05FB0EF789D9CE
+:1017600019857AAF310E688188FB91F917C2BC7D6B
+:1017700033004E65D1CEDD482FC7EBD3C8EE3943D9
+:10178000D05D11C631A27FC2DC9688F379078DB88F
+:10179000307E51AC23C34EF41CC6100EED16470626
+:1017A000D277FB8A3013FAD98A9671BA867D66336E
+:1017B00043FB07CD2C1CFD06A7D279BF254BCDC519
+:1017C0009B21DFCFC6CC91B148577944D79BB3BC9E
+:1017D00017D3A1FF533F6223901ECAD7AC23FF8AC1
+:1017E000A40B666E1D1707E39CDAE6CA47BE29E91B
+:1017F0006873D6983C844B173D4C55880E203D9419
+:1018000046F430793896178D090C589483FA680D90
+:10181000F3E0F99EC0DC282774B20EF23F76DA3589
+:1018200027DAB9243F917C03F0EAB1C507E9603BB0
+:101830009CF7660B633B1A6C943EDFE06066E071D8
+:101840003B1B1228BFBBC149697343167D7FB1C1E1
+:101850004DF9BD0D2328BFAFC143F9030D8594BEDB
+:10186000D2504CDF255F02B8101F927C45F2A37264
+:10187000BBD68EFE48C9978C74330BC03B2A9FDAC7
+:1018800013DF93FC0ED761CA0FF22389DF54A5D86A
+:1018900097E0423ED63603F15FA09EDBB51FF5F21E
+:1018A0004ABB9BF474C6F95E27D02BC2254563075B
+:1018B000D0EEDAB8D0D3BECA1584FFDD950A3387DF
+:1018C000D0D53D7561CC1C726EDC5B1FA3CB97D469
+:1018D000FFFECD3ED0FF1DBDBC55487FC77EFCE955
+:1018E000D37F84EF9B7E7C261DF10DF3D8F6388ED6
+:1018F000BB24BC6B1EB1985F6E217F547F6907814A
+:101900003FC44B19E3FB6DD38FFF46FBBBBDDEEA43
+:101910004479F823C413C0F5CF024F65F556825FB2
+:10192000E98A13BBF6E33E5FA2119F2B5B2EF6E123
+:101930006A8067887FF77822237B0448D314AF7EC0
+:10194000FC475A2002FA3FAEF0FDAB805050827146
+:101950007FAB7F7D14F7BF527F84FCE75E9B3D40E9
+:101960007280CF722EB43FA5FE2DAAC7DAFAC5A0A9
+:10197000BD84CEB15BD0EFE8D19CB06EA469C45BEE
+:1019800059D6EB2C11FD264D8A03B74C85F85EB174
+:101990005AE1FE49B33B612AC87D8F64A884C7F72A
+:1019A000D2CDB42F733298885F68A2F349D26BC549
+:1019B0001A6887FBA2294F9B13C287CBC4F7F22C6E
+:1019C00013A5F2FB16D16FDFD579D3519EE88BE5D5
+:1019D0003998E64F47F8F6B58F372B21F8DF986135
+:1019E00016F3E0E3E7E06683FF7B282B559B9D839E
+:1019F000F8E1E7971CA72C2B7F25C67196AD198DB2
+:101A0000DC97355ADC09BDA0DEB6AE7E1C5C5EB04C
+:101A1000F178E59A1ECE0F693F3B85FFBC81D64D1C
+:101A200076DDAADDBFD88D71FC551F5B09BF55431C
+:101A300044FC548E7FF8143234EAEDD5E37EF1494C
+:101A400014F91FF6F2B84A48B93D754925B7BFBA2F
+:101A5000615F75E3FF7963F7C751DDDAA9F7AAD7AC
+:101A600064A75EA07C1385F2835C4FC1C12FE3693C
+:101A70001ECA65F2FF2C38B822BEBB7B37467B7589
+:101A8000973D5BD8ED8CE5467BDDD10CBD1D1B047D
+:101A900044BAC725ED754CCD8946FBFE97E29E47BB
+:101AA0004F7A8DB46F2FD8009DC4C1FE343BA3D1B3
+:101AB0005F75B10779DA99C9CFFBF3C21E7E71A7B2
+:101AC0004A7ACEC59D91B49FE6EFFCD95BE83F9C76
+:101AD000BF55A169D4B256821BC093D942CF318C75
+:101AE000378BBB72DE9DFEF4683C47AA7F11598795
+:101AF0007436AF59F16C83F974DA9CD1BD43E6F3C7
+:101B00008DA0B36A6BF37082B39C3FF2C5DEC17ADD
+:101B1000F35A7E46F663A87781E4A0172218BFFF28
+:101B2000D1F11ECEF3ECC6A16EF4FBCD6BDE339F7C
+:101B3000E4889D110E1481CE883861D98F2D938F42
+:101B400067CBE472CB59E10F3ABB5B257E86F3C4C9
+:101B5000FD7546D1C7E345897651026E2FE2FEEE50
+:101B60001DAC3FAFB93D6A00D4FFECC0EF294DC8B2
+:101B7000E47C609EBD3517CFDFCFF646903FEBB3D8
+:101B8000BD4F8D7F15C63BDF3CBA17EE07D97F46A8
+:101B9000A685EA9FDFA81622BC989FC7BDD4227CE9
+:101BA0008786CE336EB3CF15BAEF78DCCFD9BDBF01
+:101BB0008C32E504F1596BF3DA125371FF9416235A
+:101BC000DF38A538A99E65EF681FDE635AD092C73B
+:101BD000909E69DF2552FDD5A6907A9AC54D4CD1CD
+:101BE0007C60922789E02CEE21897879BC5747F7F1
+:101BF0008A26D9C83F316B88F3AEBB914FBE63E1F3
+:101C000078E9E77C1CE5B759EFC751DCD42297F39C
+:101C10002E9CFFE2DFAA14EF3B6BA8E003096DC323
+:101C2000306EB166B5C23CB0CE7617971B6AFC2AFF
+:101C3000F342BE2FD0830F4031313355F0D34006ED
+:101C4000DE077CB2D2E4D1E0FC3BA6319F8A76A3CA
+:101C500017793C734D2A8F1B7E12E91ED29AD84009
+:101C6000461CF4774EE0B366722003E3246A5E4CB0
+:101C7000A43889731AF75BE277F493D6E4437BA820
+:101C8000D74BC4C362FB9810FAA929733BB19E1AC3
+:101C9000EB76E6D971BE8E0B24C7BE14C9508E35C3
+:101CA000ED8FE4714E3F0FDB620DC15399A0B75E1B
+:101CB000028F6C268F877C4CC4633FB62DD18FFA80
+:101CC0009BACFF98C53B03E180EB40F97D9ED69429
+:101CD00081F2AD9CEFBCA8269AE73941DFF3C29BA5
+:101CE00078BCB4C6E329B13EE6DB2D8CE2B83B9E5E
+:101CF000B3523CC999C4D67D38FE99E706325C7F61
+:101D0000BBCB3FE7009583FC0878AB7ADE1AC0F5C1
+:101D10009C7E8EDB9B4F5BB83C767A528213F156E9
+:101D20003879C32CB2C76CB52A88F7D30AD312B05E
+:101D30007C5B6FB70FDB37D4539C7415B009BC8F35
+:101D4000036921DEAB39BD6D20C5879D7E5BC51B58
+:101D500051F87D357EF7B2A6593F4078ECE0FAD3D2
+:101D600099E7FF3E30F41E9A4CABB6EAE3E0249DBF
+:101D7000C8F246B12F1B059C5765F273AB36A2F92A
+:101D8000B1545A27873BE089F43E38F8239FBA0EB6
+:101D9000E320D215E41B4F025D3D8576851D5CBFB7
+:101DA0003AB3D34271E155FB233D1477B6EA7A1377
+:101DB000C541A85C0EAF3201F82855A8DFAAC95961
+:101DC00074DF17E04D7A6CC736558CC3981DD7BDAC
+:101DD0009DC7F916A1AC48E583A9FCB4C89FDE37BE
+:101DE00098E43AE8DF83F795AA7EF0430EC7299579
+:101DF000EF32B263D888BFD674F9714646E379579B
+:101E0000BBEAA668BC07C8DE5719CA2746385D3248
+:101E1000BBFB205FFD83E05FD5FB9ED6901F548BFC
+:101E2000FB21D5CF2BDC9F0CFB0CEF4956AFBCE957
+:101E300071A2CFF72C2C1DD673AEF96751A1F8080B
+:101E400008BED6555F7353FD6AA88FFD54AF7C273B
+:101E50008AE6B3DD427126463C5E73FBE7D56B6ACA
+:101E6000DF451FCDDC8E72C5FA59EB7F7C0CFD7F00
+:101E7000B133CCEDA3AFCD74AFECACA5790EAEFF12
+:101E8000ECAE30E2476763387FF80CF8A72F13E712
+:101E900071FB4F292EEB7753E83EDC5CBFBE5F3908
+:101EA000EE9BC8B7319E24CE1D8D717DB5EF73FEBC
+:101EB0000678B983DABF6FA1F6C6756C15FCBE6BE8
+:101EC0007FEE8A207A38DB97E3E5ECEE4C3A8FDA46
+:101ED00063389DC37C53F0FEDCD95D9979742F0D76
+:101EE000851BA0872AA1DF9E8D694E718494B75B04
+:101EF000849E16809A4837D806E4BEAA7A2E575593
+:101F0000DBD6507C08C6D50ECFA734608DBD323EDF
+:101F100016E895F4C77E597C7F311C2F5EC46F9301
+:101F2000BCD3AC21FFF60AB9B066A731BE9697FFC5
+:101F30005DEC4F9C6D2F19CF8B74E85328CEA47A9B
+:101F4000F9C27948E7D575EBEEC67D26E75F6D6689
+:101F500085A887B52B2ACDA33D8CDD3B19CF8DD02D
+:101F60007142E4362DABCB9ECA1CF124AFD2391698
+:101F70009EE5E474832726DE135DAEACA1715C524E
+:101F80009FE5EB927002706818D7D73E5A94F7B06D
+:101F90006E394FE3BAE57C52B2B89DA4DDE5FCE9A9
+:101FA00048C4F36F54BA4F7BE99BA1D1B1DDC8653A
+:101FB000C1735D0BC6B7C2FCB391F6D0EE92C9ED0A
+:101FC000A8D5183F0BF3CCD8A88FEBCEDAAACF0F49
+:101FD000DAA9CFE7ECD5E7735BF479F71BFA7C1C41
+:101FE0008EDB9BEBD9787F17F56C4C51CF765AB9C5
+:101FF0009E8D79D4B331453D1BBFA39E8D79D4B35B
+:10200000318F7A36E625BC51DFC63CEADB585E22CA
+:10201000E05423E224110F48EFECE530DD7D9F8B87
+:1020200007F93D0EA003BE6F6668B46F9EC41AA484
+:102030007770BB52DF293627C6FBFA62BDE3B38651
+:10204000E17D8FD695898837731BC59D2E7885C70E
+:102050009DD6E487D9D1BED1B6E2B39518CE393535
+:10206000D67B7B566FBCCFD9B11DE15B5B7F98EE11
+:10207000BDB72D75BE7F0BC71FD95958652CC94DEB
+:10208000A578CEC5F68C4763DC375BA38FF336C6E5
+:102090007D1BE3BD8D7420E5BD4D968E44E4EB279A
+:1020A0009EB3ADC1F99F0813F74FA6DB0CFE7E214E
+:1020B000A7AD55B6E0795D9315CBFD4947403EEF9E
+:1020C000E69C9569F9E5A1248777E5D72826BA1714
+:1020D00097104FE7D06231A714A5A37D15F2B97907
+:1020E000263A372F815C86E35DFA4025F921738318
+:1020F00049B79E81FE701D7D65EF8835DC6BE8ABCE
+:10210000AB3FE440AAE15EC3207D1CFDD4A587500F
+:10211000BF9FB266A8AE5E45F14D06388A790BF9CD
+:10212000B502CE0F0FACEFC9251B5210BF8BE77560
+:10213000B6AF42F9F4A530BA175689FF0FF86225F9
+:10214000F489F7192BF78AFBC0F5FA73B85C9C4346
+:102150009566E673C406E9B0D2C13C31D07EDEA0FC
+:10216000D6DC00EA156FFF7EB82315F58AD17D9085
+:102170001FA5583C14075BB3273D6629F4BB22CD4D
+:10218000FB14D2DDC9A6C33F29C1F3700FD7F74EA8
+:10219000ACF96514C589097A4BB138C211EF9B9B24
+:1021A000787C1CDAC7D4D8205D6C6E8A0B1F600F58
+:1021B000AE374807DF109E003FDC8E53F93AF93DF9
+:1021C0003A9BC57A472B3E94A7E5FA168973850D8D
+:1021D000E0FDDC27F227857E21D7796EE0A15C2720
+:1021E000DEBF683890A2223F37EDDC9E08A9DBEA0B
+:1021F000DD87FBAE7273FA1F47C238551FF2F5FC3C
+:1022000065FDD8A81B50FEDC657117417E55D3B320
+:102210001AEAD95566BF46F195CF6DD630BEF87B28
+:102220003B36D3F7393B4A299E722EAB23FDF394FC
+:102230007C7740C0A3728CB2D101F34E1AC8E5BEC0
+:10224000CA70EEBF03F9E84D7CF7E3D20E250FE329
+:1022500078A616EFD14AE1FBFB82CF18F749E7BB1E
+:10226000530A7A133CF87D8D0F1968F16957EE8B8C
+:1022700029975DB42FA65ECE26BD6C5A6020D77F0D
+:10228000730CFAEFBBFCDD85CE16BE0F2AB540AF4E
+:1022900029B84F5EB3909C5B0BE7CD887CD4AB191B
+:1022A000BB11D2E291AA8E5E178C8BD0D1F374163B
+:1022B000B24FA0BF3B316824243FB5284D57FFAE35
+:1022C000A9D906FACF0F96131FB95177BFAE7689F9
+:1022D000CFA9909C3946FF9DF13841C66ED3B5AF6A
+:1022E000659383F590BEB77239B8766FCC16B4F7A4
+:1022F000559AB8FE34DDCBBFCF3FC0BFB3E94CB772
+:102300000FFBA7B9FFC8CF450BF905A43D7D3AFEE9
+:10231000BB1BF8C349DE753F1CEFC5A33D42777F69
+:102320005AF80371DE88875A6137AACDE276A35A3C
+:102330005FAB86EF0E00FCCD71B154CF1687F191E3
+:102340004D0AD915315D42F192FA382CEC0FE318A1
+:10235000E71F514B719F18CB2BF1DD1FC4EF2B3CB6
+:10236000AE74EE06631CE41AF247CE477B5008DEDB
+:10237000EE1EE814F28A7F655F845F919247F72230
+:10238000771ED230CE6EEAD4983CDC3746FA927C87
+:102390001DF633E9DF9DEF1E26FAEAAC3413FD5E2D
+:1023A0000D0EF33DDC8E6AA4BB39AC55C37BE273E2
+:1023B000F62A6ED447B11EC2A32FD2A3011E71B15B
+:1023C00057C241C2A70B5E7B8D716E1C4E730F28E6
+:1023D000FE40377032CEBB27B8C9F5CCF17AC7239F
+:1023E0005F90EB9A8BF3C7FE61FED8BFF443B01148
+:1023F000C6FD9946F6A9F9C53C3ED6480F932F7302
+:10240000BBCB9D97CD944E2DD2EF476C87FB62DA04
+:10241000E5782AFFAEF4321FE6C9EF3F5D1B9DC889
+:102420007548BE1BDC0FFCDEC0D5DE0532DA1DE7C9
+:102430000E14F1C8C3D8305D3CB2E0ABC6F6C67826
+:1024400064290718CF97D24813C54D76DA5349BE91
+:10245000907CD62BCE0FEF8A2FA99E17EAF1D9C414
+:10246000EBCE1BAFB0FF2D8A4CA5F7185296C6C510
+:10247000239E4AC31C147F5FBA54A5B8E752A8E74D
+:102480000C914F562E4F4BC1F3E2F88399CFF84091
+:102490006E3FFE40AFF81130CE8915965E3667B0BC
+:1024A000DEF115052918A771629D75BABF1B78ADBD
+:1024B0001BC8CF87DA1F1FA5F3ECBCE9DDA8E9D064
+:1024C000BE66C54B5118E65FBD829FE303D3BC4D8A
+:1024D000037BE379BE79BB03E1E7D89C8B76DF4DC4
+:1024E000701C607B293F54AD28E883F245CD3F0E38
+:1024F0003FE3C07BD64B2DF1287F9EFE00CE438567
+:10250000CE33921B4E854117E44F8B243BC2298565
+:1025100079D0AF74CE74E8AB55A817E635670420C0
+:102520005D68F56E1A88F2FF8A67496EA97A686954
+:1025300086AA62BFE9D1DDD94D64BA5D9CDB28BFB4
+:10254000638AF23BC6C9A0FC8E7994DF3145F91D40
+:10255000BF2FD8A097FF5E10FE42694FEEDFD891E3
+:1025600087FE3BDF18965547E7AD3D0BE5F5C54ABD
+:10257000B81BF9D162949530FF4918E9B16C6B2210
+:102580003F6F059EEB6DDC6FF4B5B89F7B7307C89A
+:102590006421F479CB651B0BBD373B9AC5E8F26328
+:1025A0006D89BAFA050E97AEFC7B090375E5B73A5B
+:1025B000F374F9DBB36ED0D59FE01EADCBDF31E213
+:1025C000565DFD499E49BAFC94C219BAFAD38A4BAA
+:1025D00075E5774D9FA72B9FE15DA8CBDF5DF98067
+:1025E000AEFE3D754B75E55F9B4023057A6941BDA5
+:1025F000CB8AEFA7D828FDBEEA3023DF58FC9B74B6
+:102600003BE27BE458535D77F6FD53421E4ACFF61A
+:102610009C407A4916EFE3248B776EBE1AC8F19975
+:10262000C480AA48DF6D4D44FA35D633968F8C7836
+:10263000FD92137058FC7CF43433F08991D7BF3E7F
+:10264000340DF20F3E3F9EE76F7AFD97A9905FF73A
+:10265000FCC3D3CCC0A7460E79FD129627FCE276C8
+:102660009E9FC248F4787AD0DFA7FA70FEB7A4AE76
+:1026700071733B49B7F7CC658A70C0FBDA08074C29
+:102680000340BF98BE0EF48BE91B40BF15C09FDE10
+:1026900002FAC5F408E89FF8FD3F41FFC4F45DD09D
+:1026A0003F317D0FF44E4C5B41EFC4F4770DD329DD
+:1026B000FDA0C14BEDFED05049E9D1863AFAFE515A
+:1026C000433DA57F6EF0D1F7D841D28E1160BAFBA1
+:1026D00001E867447FE201CBB9503FB0F4574AFFAD
+:1026E00064631D6B8B407ED1668EF9D416F43BF685
+:1026F0006C0730B34F43E4B168E6491E44E3F77317
+:1027000090DF487CFF557F6FEA20E03B1FBAA6A40C
+:102710000F55F1DCAA7B13DDB21F8AFBF5C67EBF25
+:1027200012F4F1D7419E4C6C27FDEBD2BFDD15377B
+:1027300013E27F3785C4EBD05F48DC8DF483CB3860
+:102740009F9B6DFC9EB1F473CB781ED95FC1178C33
+:10275000F8C3A8D566925F22CD2C80FDCBB89D51E1
+:10276000B6E63C8C63185563A77BB57DE0BB964FFE
+:10277000F53C2AA45BFF0AF573837EF53E62FE50AA
+:102780004EF32FF8C24B76D85122AE00DBDB78B97E
+:102790000FDB8F42DBC27594127F7A1AEFEDE607EA
+:1027A000FDFC583F82D70F607F03FE06E34505F727
+:1027B0004D726C731EF2EBE4F976BA17BA7174803D
+:1027C000DEB322A313C0658AD49F6C222FFD793B10
+:1027D000FA901D69ACD8EBC39CDE1988CF62ABE3DD
+:1027E0009308DA6769C9689F9C24E4E77F82B75938
+:1027F000D84EC253E245E251E223247E8AF0D01340
+:102800005E8DF834E251E2AFE08B205E10AE57E20D
+:102810002D8857B4E7FEBBE0ED3A337FBFCC5A6357
+:10282000A377D1AE86C77B3BD8F868A8F295D3FBD7
+:1028300015F2CFD2CBCEB7305FCE468F47D4CAF297
+:102840006F7B28F77ED161890EC1F7CD02DF19AE0B
+:10285000EEEBCB7AF23D06D97F410FF5DF0993719C
+:10286000171E7BDEF060FCE3E2020EFF42974AF0A7
+:102870001F9B3397E46466E772A613FE43BE34FEE3
+:102880009B627AD7F24BB6133DB76C7C2FBD7C5A56
+:1028900068F05BDF26E4D2DB0C72A951AE7C71904C
+:1028A000F067BB98EB3BBE57F932E76BD7FA5E2572
+:1028B0007FEF749CD8674982CED29C2A1B8974C44E
+:1028C000BC744EBE81EF9DE6E2BBA03ECADFCAFCEF
+:1028D00094DECE0274BE4E00468CF93B18A37BE416
+:1028E00087232696E0DDB8B143C70EC0EF21EFB2D3
+:1028F000BD87F39BAF7AFFCB11F22EDBEBE39C7429
+:10290000BFF2755B1AC95FB80F2D21F6C0B7E17C25
+:102910001A00E7C76138BF307D13CEAF01B0DE5F6C
+:10292000C3F985F9DBB296326C37DEA98FDB91ED06
+:102930006F778C05C5A467F8DD9EFB723F84EF3B83
+:102940003199E3D07EFE4ECCF5E370BDEFC4F43197
+:10295000F1D4AA513A78FF80EEE443B90F82E38DB7
+:10296000A7F18CF095F034C251C2F75F80E7E5EE35
+:10297000E0F995909F3B6DBF8F4A4845FF5D947885
+:10298000C7F237B92AE44FE3D412315EF5269AE74D
+:10299000A8FA1B987928F96D7210AE35360E2FA360
+:1029A000DD8A6DED630A8DDF3DA379C3B2619CCFF3
+:1029B00036AA746FFCFC8B61648F3AE5E7F6B6DBF0
+:1029C000156F5436CCAF4675AEC1F747D93BFC9D69
+:1029D00033F6CDE194C991DF814EB7F2FBF635B6FF
+:1029E000F1DDE251EA53D12E0FED7326DE8B9472A6
+:1029F000453F2B7F9740BE5FD8939C313C9CF3C1F1
+:102A00007E56CEB7255EA11DE593A09FE1C0E7925B
+:102A10007E1A4EFA45636F4F06AE4FDA113AFB4508
+:102A2000F891DF8E0A64D3BB5C8547548A277E5DAC
+:102A3000C4777D2FBBCE9E0A789A94EE756793BEBD
+:102A4000F98D8A7CE65D58671CDA1F8E0CB593FE03
+:102A5000F81DF5D011D9825FE4B25CDD7D35497790
+:102A6000AA9DE2773A3FE0F7F116BDCDE33617F5C0
+:102A70005629FEDF1817378A65FC14ED8D637B59E4
+:102A8000DC7E6790BFC87780AC0926E60C91B3C3A3
+:102A90009CE1CC19329F88AC585D3ED2DD57573F40
+:102AA0007A44AAAE3CC63348571E5798AFCBF72E90
+:102AB000BE5157BFCFF431BA7CA2F7365DFDA4CA30
+:102AC000C9FA3CEE3B807B72DD4C5DBBFEF565BA1E
+:102AD0007A2E5F95AE9CF93CAD59F1C8C7F95FDA23
+:102AE000EA45BAF2A7A20A79FCB87D0EDD534C6F15
+:102AF000FA81AE3F89DFA4388E5FE6E4E7830FFEFC
+:102B000023BF85C0734182FEDC18EB18FD8683521B
+:102B1000BD5D23E92A71500FFCAB7450CBF474D027
+:102B20008BC7F114BC3DD489728C11FFE88F085D0E
+:102B300027FA2342E182FE88D03CFA2342EBA33FEE
+:102B400022B41CFD11A1E5438FE8F13FAC558FFF86
+:102B5000EB8F8EF9A778BAA14D4F0F463CDD744A32
+:102B60004F1FA3BCE10497B1208F21BD4B3C4D8783
+:102B7000FFE89C67C5D16837B88579E85EC0FF1665
+:102B8000BE5EC816F62381AF2FD99A61F8CEE5C58F
+:102B900052CEC77B3AE79FEBEF7909F9EE09E4F3F0
+:102BA000C3AEB403C87852DF188E4FDFB130E2579E
+:102BB0005F9BDA22F1FCF8BEDA4676F944D6F126BC
+:102BC000BE3FE3E8E53D84FCA80F460F40F993F3D0
+:102BD000EECCC3736ED6AFAC2928D7CCEACFDF13C7
+:102BE00064396DF44E8B9CCFAC241E7FF476B6E036
+:102BF000D36E1E87F46E36B7FF44BA1D14075D9A74
+:102C000023DEA131B3945983910EDF0DCB443A5B9F
+:102C1000CFED5C6D1627C5B5F8801ED14F89F23611
+:102C2000CAC3C9421E6DFC93CDC6E98EE9CEF781B9
+:102C30007E9B2E0E377B8743971FDC9CA0AB3FE427
+:102C40008053579E17C8D2950F3DE2D6E587B58EC3
+:102C5000D0D5BFFEA84797BFA1AD5057FFA653C51B
+:102C6000BA7C12EB7802E1A9E6A4123CFA2BC20E60
+:102C7000E0E47899F5FD78BA4F23F5081997ED153A
+:102C8000746CD447FA6B5E8AF36E4C646EBA0F6252
+:102C900013FA20D3EB295E11572DE579E6D3C755FA
+:102CA000CB78EA2E7D46E82F529F0889A7F6E0FCF4
+:102CB000653C7517DEC5FB9246FA74E408BF906167
+:102CC0001DFD357EFFABF1018DEEB1C8F919E73579
+:102CD00043C4036EB375FFFE504A0EB71B6C4E2DF6
+:102CE0008ECF817ACFC0F144F0BC623C779B0FE07D
+:102CF000DBF823CDBDCC79F5F1660DE1EB29C17789
+:102D00005573E89D4EBAB726C7CD15E3F6CA55BA36
+:102D10005DDFAC681EDFC5A235BA77D1F3781CAE93
+:102D2000091A5B4EEF24897B08F7AC695E9B094565
+:102D3000255A9385BFABEFB7A09DA8680CC88179D1
+:102D4000C027B6ED5B6F07F9E7997A33D97D86E541
+:102D500024DFE91B10BC57D21FF434A49322C43FD4
+:102D6000F4FBFC601EEF7C670E5F5F81FA4DD77D40
+:102D700000AB8ECF73FDAF1BBA237A94EBF8BFBACA
+:102D80001F20E9D70827A95F33717E0D10F392F059
+:102D9000EBB29F08F8C9FB19CE8596E22D76BAE70B
+:102DA00051887165127F070773BA5C2DE081F59039
+:102DB0001FF554AF40CD89463B782773463BAE6242
+:102DC0000FFE3FBA3741F0EFE9BE574F7CE20AFEF3
+:102DD000D0C3FDAF9EE893FEBEC33DB0103EC1E33D
+:102DE0007D043EFC034CE4575F15A9DFC7FB73B8B5
+:102DF000DDA544EC2738B7ED797A3EC1D0AEDFB817
+:102E000042157C624ED7EF4FE0F7D92B2C245F336D
+:102E100056FC18C619FC65BD85E262477918C931B0
+:102E2000651B15FF6605CFD1910938FF529FFE3C07
+:102E3000BE85B957A2FFA37CB5FEFB5C3BFF9D8A14
+:102E4000D9C6775384BE3EF72AFAFA8E1C718EBB20
+:102E5000999BE42EE1FFAF146D8C7257A79FFBCDB9
+:102E600050DF56B9DD89E2C6E4F9EE44FF4DC87B78
+:102E70002000CFF02C3CC7979BBB8DE7EB82670F00
+:102E8000F10AE7EC225EC1CEE3333AF78671FFA682
+:102E9000F42B89FAE77C97A81CEB636FE7F378DCE7
+:102EA00085F42719FD559D7613F95B3AF746927F15
+:102EB0001EFD38D14007674C7BE247B882F3F3B67A
+:102EC000A93A3F8831F52E7D89F4C58169DEDF217D
+:102ED0005F3F6B76DBDC907FD0FE3ABD1F5524EC64
+:102EE0005EC6F976E95D23F9FB2E9D3E2ECF761660
+:102EF000F27738802F32DC47320E6112032D15D263
+:102F0000D2C00D349FEFEACF9972398FFB312FDF9A
+:102F100044EDBDAB6FA07CFFE56B17E23D98698D7A
+:102F2000732DE8C26E7B62494138346D4BF62F0B2E
+:102F300047BC8D56BAB5CB5F12786B33C4D7CBB4D0
+:102F40005CF0237C438EF3251187B454A17DB048F7
+:102F500061322E89F8B8CC5F6A12F9029E5FBC829A
+:102F6000E7DBC4FBFADB851D05D78D29AE1BF5FE1B
+:102F70009DC2CE82EBC614D78DDF916F611EF9160C
+:102F8000E6916F611EF916A6C8B7F07B192B4EC9E2
+:102F900053B91F6A5CE8BEBB6C63E342F60BFAA14F
+:102FA00042F3E8870AAD8F7EA8D072F4438596A3DA
+:102FB0001F2A348F7EA8D0FAE8870ACDB311B7064E
+:102FC000F3C8E73C9374F92920E78F0BD9DFE88732
+:102FD0000AED1FFD50BAFEBC0B75EDEF66F5BAF6B3
+:102FE000E8870AAD7F6FBDA2F353DD2BDE392DDFFD
+:102FF00010C7E9C759EC1E0C74F05F11FFB8DF92DF
+:103000008A786E99C7F5B27037C7735321C7BB89E9
+:10301000713C77CC203C2FD178BE80C7271BE907B5
+:10302000FD3DE32CDCDF8329FA7B30457F0FA6E8EA
+:10303000EF1997CEFD3D98A2BF07BFA3BF0753F47A
+:10304000F7608AFE1E4CD1DF8329FA7B30457F0F63
+:10305000B6437F0FA6E8EFC1EFE8EFC114FD3DF8DE
+:10306000FD18FA9D2CC179A11C3F40A73F021DEA23
+:10307000F447872E8F727C687D94E343CB518E0F8B
+:103080002D47393E348F727C687D94E343F3753964
+:103090004EDA5F28CF87B643793E343FB8C9F7266A
+:1030A000DACE266CBCF006A66D91CA330AB08C85C8
+:1030B000BBF6DE897EB9B63025250638A74579E509
+:1030C000CE7190F78AF8BF5CD661427C7BC57BEA03
+:1030D000DE00A378CBC17F4DA4F217C4BD7EFA03F6
+:1030E000BCE7ED65F4BB24D25F2CDBBB9943C55430
+:1030F000D60FE6BBAF671C5FD623FE19320FBC01AB
+:103100008CF12A794BECF918EFB9DDA4509CC4F688
+:10311000653C4ED84857DB045FDA6EDAF33ADE03DB
+:10312000E92855E83E7086991DB1E4239CEAF2F146
+:10313000FC5D3B3846ACABEE46BC6F22E72DED9B09
+:10314000C027E8FEDCC88ED6B1D1D08FD7379A7EA3
+:1031500027A548E37203B6437D32DBA778B684D057
+:10316000F7E38339DFF4FAF8F83FDF3491B70BE780
+:10317000ED7EBE298AE03871B942F1522377320FD1
+:10318000DECFF58B7967EF0CA8385EE9723E9EECD6
+:10319000B774630ADD5B2C656DE312C847A230E4A7
+:1031A000DB126EB0BE37707DA0361C41FBF4B5DE7D
+:1031B000FBB9F9BA98028CA3632D8CDEB19C70DD4B
+:1031C0006F75EB25B40FA77EE95CCBF429F45EF0B4
+:1031D00044DFD265A86E4CF02D7CB337D6DFCADC55
+:1031E0002E271D45742F56CE6790678F098E459602
+:1031F000C35A4D610AE29B1D8E0BA11FD8F95311D2
+:10320000DF796E0BBDDF3BC9ECB0D0FB113DC49F35
+:103210005CB2CBF81383BC608833695C723405ED13
+:10322000C98B224D64FF5DF412FF3D00EF0685F867
+:103230009A94834A459CDAA5E56FF6BE0BE1BEC7BA
+:1032400042FDC9F893DA347F8A09E3EAFB6ECE8D3A
+:1032500055490EF8FD6094037CBFBC7304D65BC176
+:10326000DFB1BCB47C5A74807AE2FE9A0A01AF0ADC
+:1032700011C7548A0F7AABC1DFD392F73B5813972B
+:10328000F7A43DA7F43743DF42FC963E2DDE955E62
+:103290005D4AF7B28D7144F3965B28EE689E412E2D
+:1032A000AC167261F555E4C2B3830D72A1FCBD1476
+:1032B000D186A9FDFE80717BF25E628985EFFF9267
+:1032C0003D8CECB0254BC79AE81DE49738DD942C73
+:1032D000E5F24DC9CB1EBA5F28E5C5F7851C33F969
+:1032E0007212C1FDF7426E9986F19500DFA2B630E9
+:1032F00011879548E95D9779BCE5643BE7036D0765
+:10330000F93B109D3E2B97A7DE60FC1D33035D4EFD
+:1033100032FB4D78E1CE3D12E812F213500E82FEE0
+:10332000A6A35C148774EE2AA0F8BD4285EEBD18F2
+:10333000E9BCC852F726C687166D636E1F0BA573CE
+:10334000A05FECCFA7D0FB005EA1D74AFA35D2FB35
+:10335000AC08618FB2737B53975D0265547CA4DB2C
+:10336000177517CA8DB3D0B7D797130CC69D45E60E
+:10337000F0F2F4DD51772D4725A7073B85FA038D41
+:10338000E0E195EF20F46037407B01F2C97BEECBA2
+:10339000D3CA42F8E49743C6140CE91DC47759D741
+:1033A0007DBF1C7A1774D183E9F47B383DC9C3E52E
+:1033B0000057DC17B3A2DBEEC75F661B97CB3CE37D
+:1033C00046E0EF0B32F9087900E308678AFCC2DCBB
+:1033D000EBFF88BAEDAC089EF7ECEE7717C685D404
+:1033E000DADAC623D92DC8F116E23DC6207F2AF6C7
+:1033F0002429C89FF202A813CEC810E78FC11EB1BE
+:1034000030D7C9D769B04B94E770BE2D7F17E5F868
+:1034100083FB77E37925E77FBC87DF6198976BFAB9
+:103420005FBD0761BCFFF0FDBEDE99B9D0FF63262A
+:103430007E9FBFAFDAC4847D88FCC2925F30F10EFC
+:103440004610EF1E7A47B7F141C5116A9FF2AE569A
+:10345000F83DFA1EEC382CABE3896DD06E568346EE
+:10346000BFE3B72983D3CF26A01FFABD14ADF54D16
+:103470009B2B08C78FEB1FB1D0EFD2B0403ABEBF35
+:1034800033B32ECC8DFCF8CB21C575B9C3F0F7480A
+:10349000DCC4870A30861CCFF35EC58B713DB56BEB
+:1034A0000E3D83EF092C6871D1EF95941EC85B899E
+:1034B000EF9C7C39C45B8FE5A57607BDA7317F798A
+:1034C0000C9D5FB3FA887BA1AC83FC6C12FE4DC2ED
+:1034D0007E75AB9B89DFDB12F71D80414ED2D5EBA9
+:1034E000DE8E27ED84463B83F17D899EEC0BD29ED8
+:1034F00080F6032DC4CE28ED1396ACE333506E282E
+:10350000D1F4F712657A2857E8B9420F9CDD756E41
+:10351000E58CEF83F2F13AC541EF4DDA9D77DD009E
+:10352000F98A23168CEC6445B14E0DDF1FE800FCD0
+:10353000627C7419EC57E43325224EAB62C30DB4A0
+:10354000DF2AFC9076F30EA74CEF5E7738F965A47E
+:103550009F8087FC96150E8F161BB2EFCB9B14DD58
+:10356000BB0332BF2797DBE34A602B23FCEEB9CFC6
+:10357000A5E1DB3E25204660FCDFA15CA7CE7F0CE9
+:10358000F5281EA42895BDC5DF818779BBF878F999
+:1035900021FD9735F17BD3320FF549FE793537920E
+:1035A000F057EA8075BB3075D03C010E04A78EB58C
+:1035B000D09F93C6217C9407FC16D4B74B300E05E0
+:1035C000F2331D7E0B8E53B69CBF63E25DC3C7F121
+:1035D000AE8ED106A37C647668C9083FF13BAD305E
+:1035E0003F92232B002E781F0BEFBBE1D962844F53
+:1035F000A9986F45530CBDA310FCBECE82F898D19C
+:10360000C3BB08E705DD962D1F4DF7D72BCC1EBA9F
+:10361000E7E015F0FDCBC2B087D03F3063FDE31685
+:1036200017E43F11F47B5EECBBA2D4403ABD57B423
+:1036300030CC8DF39CE168A2F575C1F7518087828B
+:10364000EFDC14137C812E7C18B757B15E8FCFE06E
+:103650007C387C2BD697D27E9B63F66A8ED0796CB1
+:1036600038948EF7AA66C0FEC6772598C34BF72517
+:103670003F7DF4AE145A27CC13E11AE9768EC7F7D2
+:1036800087804EF83D18B11E79AF5B8E6719C2EF87
+:103690009D5A8670FB59CFFBD243724D23E017ED44
+:1036A000DE3DED4B0D19378CAB55F0DF9130EE530D
+:1036B000B93FE5BE94FB54EEDF672CC5810425C8F5
+:1036C00067E09CAD7BB11B38150CE1789829F00AB6
+:1036D000707D23F49E57EE10BE9F4B52F5FB1DFBF1
+:1036E000C37EFB0EE1782F191348C77799647D39A3
+:1036F0006E492C6F87748FF4D6578C87F517517DE0
+:10370000938E5F9477F18B9D2BE2915FEC51B81F04
+:1037100074EDE1E4EFA3FCBA8BCBAF676BB6CDC71A
+:10372000F39299FD29A1EFFBCF063907F9C41C716B
+:103730003E5704BAE7173B33BCD94342F673C5CFB3
+:1037400076657839BF0920BFF9F3AE573FBCD11970
+:103750003C4FE57ACA56FFD6526A0F859F22DE1D7E
+:10376000E9A4FB78E576CD89F1CEE5CB4B89FFB2B4
+:1037700004900B9590F833035D942E57E81E597909
+:10378000FD70BFFABFC8A7CBD74CA2770F24DEE4E9
+:10379000FB2CF27C95F39F28F0356908DF87330511
+:1037A0007DCFAC1CAD25F622B91BC32CD90CF17D05
+:1037B0004685FE7B17DEBAFCD7392B71BFE0FD22B0
+:1037C000D24FD658B8BD6F27B73F9E5DB4FFBD3B03
+:1037D000A1DE99C736A730558F379453E70879751E
+:1037E000AEB0FF7583B73294DB647EEE268EB7F2FF
+:1037F000DDBFF904DF132B4915FC6E2D7F07A0AC4C
+:10380000790FE171C6EA751617CA75435CBAF736C7
+:10381000CAEBF21C68579EB97AB305F9C4A2211C01
+:103820008EC6FD5022E284259CF15C5242FC1BB204
+:103830003EF2477CFFFEBE85615118CF23C7794A0F
+:10384000D07D795D4C2C8E575E57FA13D487E4797E
+:10385000605CE78930BE5FCAA03FDCB72746BB5338
+:1038600016E504E55963FD47041D3E65E1BF53932A
+:1038700014D1FC1CC5352C087723FF1830A0CD8F40
+:10388000E3227DE3BC3513FF5D9B01356D9FE33C77
+:1038900040D4A6B81A4CF17D2C14BDE321BFC5C499
+:1038A000EF6FA5AA3C3D20E003E5012C67BDDAE8F7
+:1038B000F73542E26675F4ABB1ADF4FB895A2F4699
+:1038C000EF9B497A95FD487A95F4DCD3FA9AAF716B
+:1038D0007D275C1C9E9AF8DD946B5E9F95FF8EAEF3
+:1038E0005C979C1FC8F01E7ADFE38783C9DE736292
+:1038F000A93B05E3267B5EEFFA82F86ED66B5CA7E8
+:10390000DC373216BECB9FD5C4FD0E271438DFA09E
+:10391000DD89856114DF26D7F55DEDE11F0C899502
+:10392000EFF947A29C59121EBC2F8FF03B56CF7F58
+:103930005F577E9772817C674EF2EF9375E2DC648D
+:103940006D6B717FB3FA347AFFE458D389487C8F6A
+:10395000E5C4683E3FD9EE3E0BBF9FCC223527DE43
+:10396000138BB8EFB7057DD03FB4DE95A740BB7B86
+:10397000EA871EC3F7C7EF59DE87F4FBD976E74A1B
+:103980003C1767FB5CE40F8E589FF729BEA3377B7B
+:103990007936FD6EEF7D0A2B267D52E8097358D7E4
+:1039A0001FE90973055F9B8BFC12EF4BD51FA677B0
+:1039B000F3E6B8C3F2F07C9FBB81EB094526B61A4B
+:1039C000FD89FD1B8BC7231FEB7842E1BFFBBC5178
+:1039D000FF0E577666F1453C1F8CEFDEDD6769F61A
+:1039E000E03A18C82368779A6D2FE672BDE09FC74A
+:1039F000D6B7D3EF6522BCE9F7720CF69BFE1ABF6F
+:103A000047DC1169227B1CE0FD7DFC3D327C6FDDD3
+:103A10004AE78DDE7ED3FFC723E8F7DAE43DA10A4B
+:103A2000E177FA7F89106A7A0080000000000000C8
+:103A30001F8B080000000000000BCD567D4C535733
+:103A4000143FF7BE7E53E8E31B44B08060B7157C9B
+:103A500005257126FA066A4C66B4B8A13451A851FE
+:103A6000192A65CC2C019739AB9DCE68B6B10415E7
+:103A7000892C8529FB675B4A249B666C6924CE6C84
+:103A8000928CC83F266CA4240BA299A16359906420
+:103A9000D39D735F9B1A3F92FDB9F7CF79F7DEF3A1
+:103AA00075CFEF77CE7B506FE29005D06C02F1ECD2
+:103AB000ED7B2D0BAC28BB25B05702F4D0E62A8055
+:103AC000135D35591127C09E4FD69FF597011430CD
+:103AD000708750EF375DA4165600CCF465A71D65BE
+:103AE00078EE0B94029EEFE9FBA080E44C9FB93E78
+:103AF000887AEBE4DA75A919004D17525D921DE042
+:103B0000113D6BD18F82469900FB7D35D95004D091
+:103B1000F270E453B918E31702C8E8F7AF5052D077
+:103B20008F2A2D47AE14481C40317A7395950007B3
+:103B3000F8F0B655E8E71E0B0EE40A7D7BB66C4D37
+:103B4000F87D524E1F01B01B017CEFDD167EEEF3B7
+:103B5000D1CD1EB46FF15D4E213F07CE8C57C9B851
+:103B6000FF42B1B744C924BF7D03B28477EFEE2B87
+:103B700077E33D4A1510796E4A736FF3605ED11F8B
+:103B800025A5DFFEFC78CD5730E9CAC47A67D06638
+:103B900000AC9F370C0699A40C86349433127484BD
+:103BA000506E2A82C6ADD6C4FEAA585D666C9D05CD
+:103BB0006EDCDF3770AEC08EF26EB2B6DE31B0FDB5
+:103BC000274841FD8B4603E1E5D5814141BBDD7EC0
+:103BD000A6065142731A406E227E8D92048075DBD8
+:103BE000D78D49A527F6018262FFAE0E36521E4BD5
+:103BF0000251D75B282774E1BD84EB449B59F11730
+:103C0000124E7691CF44A7B481F6FD6F332861B48C
+:103C1000BE9CBC14E337D8A08DEC935784C21C71B2
+:103C2000F60DA556481AA504BF5A656DB15EB26E71
+:103C3000C8C3F383834C36A2CB8357AF6F006D0D9F
+:103C4000C09E5FCFFD0F5683FDB1BCF70F0D1AEC80
+:103C500018AFE50BBC2FC66F090DFEB008FDB45EB2
+:103C6000D955A9C5ED04A8C23CE815E3B40E6975A1
+:103C7000F10D4D19763B137E7639D24EE421B64DC7
+:103C8000A135DBCFA0DE2EC2ED6580C3E515F5477B
+:103C9000979294C5BD41172D7027039C72DC327832
+:103CA000C9CFFB317F8E5B278AC47D6BD3E1313E68
+:103CB000BCA1E8855DDC1EEB21ECC23ECB49580E71
+:103CC000A0B65A7524033E6B0AC90B6DDCA1C3BABA
+:103CD000AACCA24858EF0E534A39D800E6CD9A1C18
+:103CE000B668B29DBB079B30C5793E6606E47DBBD6
+:103CF000D4C948AE75B631AC34C819DEC3C4DF1CB4
+:103D0000083110850833CA7BF6BB3B95147FCD92F2
+:103D1000C89F8029E9995ABF0EF9715C9105FEE0B0
+:103D20008C5412CF33AF4123F1AB570F27CD15740D
+:103D30006F376C2D232FF84EB82FF0E025CC6F98FD
+:103D4000853F23FFF1FB5E25BEA21FB7D17A9261AA
+:103D50009E06BBF723CA630BD397B93861209590B1
+:103D6000FF59BD760E9DE75413F2A25AA305E473E2
+:103D7000F00352D6B028C74ABC66AA0A1D18FF989D
+:103D8000F3DA6EE2C7E9A8098C183710AB4775D48F
+:103D900032C5502F7FD1460EE5A86FCF801D687FBA
+:103DA000CDC9FD46CCF3349882A40FA6F56AC4A110
+:103DB000C57884F3C5C0CDAAD01FBEB1C050E649B6
+:103DC0007F8CD8503FAF9D2901D469989BEEFD1997
+:103DD000E50E08BAA8AE5B32BC9FD3BC999CDB3819
+:103DE000E5457C4FCB2113F5193D8FE73F7C6821DA
+:103DF000258D27F29A8D4E7FF9CD0A922685A15DF9
+:103E0000F5B01436963F9DCF6C8E5D4771502FCC28
+:103E100049DFCA838C91FEC86DCAAFDA640D4B29A5
+:103E200064A7FF3D624AD8C1587EEAF44B20207E49
+:103E300094079015D0705B13EBC3382E37152E7096
+:103E4000B919C3275E3F913CF6C74193D61FDF5B8C
+:103E50000776127FE2FDFA666C7FEE41918DE6CB2C
+:103E6000DC70B10D9CCFEFCF719CAFB00CE75CA1C3
+:103E70003A4EB8E3A39AD07F5DAC3E8837905F2975
+:103E8000E6B72E56A73A2BD7EAF2FA137589F12432
+:103E9000CE8378DE719CE3F8C13B63D76D8502B7B2
+:103EA000B28F41E0F52BC59F5C183D8E6D058B24CC
+:103EB00075CA5BF87FC42B6C5E86BC8E9EE14A3F60
+:103EC000F19F0A5F21A4CAF17EE000310F1A248B12
+:103ED00072EA19F3C04BF36039CD834ED1E7F33C5E
+:103EE0007A9D339A076D629D03D1A33A5C4FF248E5
+:103EF00032E51B3123EB5116BA8AC43CCAA38E2E7D
+:103F0000D670A2BEEE3D94DC7F0AF5034C3D6F42B5
+:103F1000FB803ED6EFFBACC14BB83F1BE47E3DC6F9
+:103F2000EB4A0D9E6FC2FDAEBAC58A1FEB340B3152
+:103F3000BD668B980BAB3917EBA8272BD85F48FAD7
+:103F4000D8D778CF2ECF8BE23BFEF543744EF72EB9
+:103F500001EDDC05A5DD745EEB10FEBE8DCF990F83
+:103F60009385BFAE5A35D722CEB338D91F4FF7E667
+:103F7000B93209574D0F7F04845E4F8F9A4B78F406
+:103F80006C3508BDB3CCEDD94B7ECAACCA25F41B49
+:103F9000F158BE1AD0E00833DC9FECD0EE1BE7AF3F
+:103FA000A7549B834BFC53E7E93FC45F0D8E36E477
+:103FB000FD24F17079021FA6221669099CE27CF4A7
+:103FC000EB11AF0C0DAF63EC69BC326278B10EE45B
+:103FD0006D0AE11612F59FE71A0EED124492F04EAB
+:103FE0001257728C282732BC55DA3DC772E9BCC122
+:103FF0001859D9E9243CA139F48C3E7CC5A5F53982
+:10400000D0571479DE18E379639C8FEF3EC1C7C89F
+:10401000E2D4E9A4181FD1FE178BBB86E2DD67E36B
+:1040200055B439FA8F54FFAC389B5CDA7FC99CD108
+:10403000FB2AE9C3C56C2EE688ACF5F5A8EB4E3E2D
+:104040007D67E0EF91C5F4DDE94D776F263DF3D252
+:10405000A8C14BF5CC8DEAE93E939E7BF9F43FD3A2
+:10406000D87143F4CD7FCDF35F8E8A94E2B00A001D
+:104070000000000000000000000000180000000028
+:1040800000000000000000400000000000000000F0
+:1040900000000028000000000000000000000010E8
+:1040A00000000000000000000000002000000000F0
+:1040B00000000000000000100000000000000000F0
+:1040C00000000008000000000000000000000000E8
+:1040D00000000000000000000000000000000000E0
+:1040E00000000000000000000000000000000000D0
+:1040F00000000000000000000000000000000000C0
+:1041000000000000000000000000000000000000AF
+:10411000000000000000000000000000000000009F
+:10412000000000000000000000000000000000008F
+:10413000000000000000000000000000000000007F
+:10414000000000000000000000000000000000006F
+:10415000000000000000000000000000000000005F
+:10416000000000000000000000000000000000004F
+:10417000000000000000000000000000000000003F
+:10418000000000000000000000000000000000002F
+:10419000000000000000000000000000000000001F
+:1041A000000000000000000000000000000000000F
+:1041B00000000000000000000000000000000000FF
+:1041C00000000000000000000000000000000000EF
+:1041D00000000000000000000000000000000000DF
+:1041E00000003328001000000000000800003330F9
+:1041F0000010000000000002000033280010000042
+:104200000000001000003A780000000000000008E4
+:10421000800000000000000000000000800000009E
+:10422000000000000000000080000000000000000E
+:104230000000000000003120000000000000000825
+:10424000000033600001000400000001000033683A
+:1042500000000000000000020000337000000000B9
+:10426000000000080000337400000000000000029D
+:1042700000003A70000000000000000800003A4012
+:10428000000800000000000800003D880040000019
+:104290000000004000003A50000800000000000844
+:1042A00000003A60000800000000000800003A88A2
+:1042B00000C800000000009800003C1800980000B2
+:1042C0000000002800003C58009800000000002872
+:1042D00000003378036000300000036000003EB04F
+:1042E000000800000000000100003EB100080000CE
+:1042F0000000000100002008001000000000001075
+:104300000000200000000000000000088000000005
+:10431000000000000000000080000000000000001D
+:10432000000000000000000000000000000000008D
+:10433000000000000000000000000000000000007D
+:1043400000000000000000008000000000000000ED
+:1043500000000000800000000000000000000000DD
+:10436000800000000000000000000000800000004D
+:1043700000000000000000008000000000000000BD
+:1043800000000000800000000000000000000000AD
+:10439000800000000000000000000000800000001D
+:1043A000000000000000000080000000000000008D
+:1043B000000000008000000000000000000000007D
+:1043C00080000000000000000000000080000000ED
+:1043D000000000000000000080000000000000005D
+:1043E00000000000000000000000000000000000CD
+:1043F00000000000000000000000000000000000BD
+:1044000000000000000000000000000000000000AC
+:10441000000000000000000000000000000000009C
+:10442000800000000000000000000000800000008C
+:1044300000000000000000008000000000000000FC
+:10444000000000000000000000000000000000006C
+:10445000800000000000000000000000800000005C
+:1044600000000000000000008000000000000000CC
+:10447000000000000000000000000000000000003C
+:10448000000000000000000000000000000000002C
+:10449000000000000000000000000000000000001C
+:1044A000000000000000000000000000000000000C
+:1044B000000000000000000000000000000012C822
+:1044C00000800000000000800000000100000000EB
+:1044D0000000000000004000049000000000049074
+:1044E000000019C800000000000000080000494852
+:1044F0000008000000000008000049280008000033
+:104500000000000800004938000800000000000812
+:104510000000200800100000000000100000200033
+:10452000000000000000000800004010049000405F
+:104530000000004000004998000800000000000151
+:104540000000499900080000000000018000000000
+:1045500000000000000000008000000000000000DB
+:1045600000000000800000000000000000000000CB
+:10457000800000000000000000000000800000003B
+:1045800000000000000000008000000000000000AB
+:10459000000000008000000000000000000000009B
+:1045A000800000000000000000000000800000000B
+:1045B000000000000000000080000000000000007B
+:1045C000000000008000000000000000000000006B
+:1045D00080000000000000000000000080000000DB
+:1045E00000000000000000000000000000000000CB
+:1045F00000000000000000000000000000000000BB
+:1046000000000000000000000000000000000000AA
+:10461000000000000000000000000000000000009A
+:10462000000000008000000000000000000000000A
+:1046300080000000000000000000000000000000FA
+:1046400000000000000000008000000000000000EA
+:1046500000000000800000000000000000000000DA
+:10466000800000000000000000000000800000004A
+:1046700000000000000000000000400000180000E2
+:10468000000000180000430000400000000000404F
+:104690000000430000400002000000010000430150
+:1046A0000040000200000000000030000040000058
+:1046B000000000408000000000000000000000003A
+:1046C000000030000008004000000004000030043A
+:1046D000000800400000000400004B00002800001B
+:1046E0000000002800004B500010000000000010E7
+:1046F000000038000080000000000080000038004A
+:1047000000080080000000020000390000200000C6
+:104710000000002000002008001000000000001031
+:104720000000200000000000000000080000510808
+:1047300000080000000000080000512000080000F0
+:1047400000000008000051300008000000000008D0
+:10475000000051C00008000000000001000051C12D
+:1047600000080000000000010000394000100004B3
+:1047700000000004000051D00030001800000010BC
+:10478000000051D800300018000000028000000036
+:104790000000000000000000800000000000000099
+:1047A0000000000080000000000000000000000089
+:1047B00080000000000000000000000080000000F9
+:1047C0000000000000000000800000000000000069
+:1047D0000000000080000000000000000000000059
+:1047E00080000000000000000000000080000000C9
+:1047F00000000000000000000000000000000000B9
+:1048000000000000000000000000000000000000A8
+:104810000000000000000000000000000000000098
+:104820000000000000000000800000000000000008
+:1048300000000000800000000000000000000000F8
+:10484000000000000000000000000000000023E85D
+:104850000080000000000080000000010000000057
+:104860000000000000002008001000000000001000
+:1048700000002000000000000000000800002DA043
+:10488000000800000000000800002DB8000800002B
+:1048900000000008000024E802D00028000002D038
+:1048A00000002E58000800000000000100002E59F2
+:1048B000000800000000000100002D90000800002A
+:1048C0000000000880000000000000000000000060
+:1048D00080000000000000000000000080000000D8
+:1048E0000000000000000000800000000000000048
+:1048F0000000000080000000000000000000000038
+:1049000080000000000000000000000080000000A7
+:104910000000000000000000000000000000000097
+:104920000000000000000000000000000000000087
+:104930000000000000000000000000000000000077
+:1049400000000000000000008000000000000000E7
+:1049500000000000800000000000000000000000D7
+:1049600000000000000000000000000080000000C7
+:1049700000000000000000008000000000000000B7
+:1049800000000000800000000000000000000000A7
+:104990008000000000000000000000000000250072
+:1049A0000040000000000008000025080040000052
+:1049B00000000028000009C00120001000000008CD
+:1049C00080000000000000000000000080000000E7
+:1049D00000000000000000000000402002D000287D
+:1049E000000000080000300000000000000010007F
+:1049F000000050990000000000000001000050B0CD
+:104A00000000000000000002000045A00090000827
+:104A1000000000088000000000000000000000000E
+:104A2000000029600008000000000001000029616A
+:104A300000080000000000010000297000080004C8
+:104A400000000002000029780008000400000004B3
+:104A500000002FB0000800000000000400002FB488
+:104A6000000800000000000400002FC0000000004B
+:104A70000000000800002FC800000000000000082F
+:104A80000000300000000000000000100000504056
+:104A900000010001000000010000500000000000C3
+:104AA00000000020000008080010000000000004C2
+:104AB0000000080C0010000000000001000008B712
+:104AC0000000000000000001000008B60000000027
+:104AD0000000000100001000003000180000000479
+:104AE000000010040030001800000004000010084E
+:104AF00000300018000000020000100A003000180A
+:104B0000000000020000100C00300018000000013E
+:104B10000000100D00300018000000010000100E11
+:104B200000300018000000010000101000300018D4
+:104B30000000000400001014003000180000000401
+:104B40000000300001000080000800040000300474
+:104B500001000080000800040000000A00000000BE
+:104B6000000000000000306801000080000000012B
+:104B70000000306901000080000000010000306C7E
+:104B800001000080000000020000306E0100008083
+:104B900000000002000030700100008000000004EE
+:104BA0000000307401000080000000040000306646
+:104BB000010000800000000200003064010000805D
+:104BC00000000001000030600100008000000002D1
+:104BD0000000306201000080000000020000305040
+:104BE000010000800000000400003054010000803B
+:104BF00000000004000030580100008000000004A4
+:104C00000000305C01000080000000040000307CE7
+:104C100001000080000000010000307D01000080E4
+:104C20000000000100001C1800100000000000043B
+:104C300000001C30001000000000000400001C38C0
+:104C400000100000000000048000000000000000D0
+:104C500000000000800000000000000000000000D4
+:104C60008000000000000000000000008000000044
+:104C7000000000000000000000004C1000080000D0
+:104C80000000000200004C120008000000000002BA
+:104C900000004C14000800000000000400004C203C
+:104CA000000800000000000800004C300040000830
+:104CB0000000000800004C00000800000000000296
+:104CC00000004C02000800000000000100004C043D
+:104CD000000800000000000200004CD000080000A6
+:104CE0000000000800004CE0000800000000000484
+:104CF00000004CE4000800000000000100004CF03F
+:104D0000000800000000000200004CF40008000051
+:104D10000000000200004D00000800000000000438
+:104D200000005000001000000000000400005004CB
+:104D300000100000000000040000500800100000F7
+:104D40000000000400001400000800000000000241
+:104D5000000014020008000000000001000014041C
+:104D6000000800000000000200001410000800000D
+:104D700000000002000014140008000000000002FF
+:104D8000000014160008000000000002000019B81E
+:104D900000080000000000080000142000080000C7
+:104DA00000000002000014240008000000000002BF
+:104DB000000019C8000800000000000800002C10C6
+:104DC000000800000000000100002C110008000095
+:104DD0000000000100002C1200080000000000018B
+:104DE00000002C13000800000000000100002C004F
+:104DF000000800000000000200002C020008000073
+:104E00000000000100002C04000800000000000267
+:104E100000002C30000800000000000200002C32CE
+:104E2000000800000000000200002C340008000010
+:104E30000000000200002C2000080000000000011B
+:104E400000002C21000800000000000100002C22BE
+:104E5000000800000000000100002C2300080000F2
+:104E60000000000100002C240008000000000001E8
+:104E700000002C25000800000000000100002C2686
+:104E800000080000000000010000140000080000FD
+:104E900000000002000014020008000000000001F1
+:104EA00000001404000800000000000200001412BA
+:104EB00000C00018000000020000141000C000181C
+:104EC000000000020000141C00C0001800000008D0
+:104ED0000000141400C0001800000008000014278F
+:104EE00000C00018000000010000142400C00018D9
+:104EF000000000020000142600C00018000000019D
+:104F0000000015900008000000000008000015A037
+:104F10000008000000000008000015B000080000B4
+:104F200000000008800000000000000000000000F9
+:104F30008000000000000000000000008000000071
+:104F400000000000000000008000000000000000E1
+:104F500000000000800000000000000000000000D1
+:104F60008000000000000000000000008000000041
+:104F700000000000000000008000000000000000B1
+:104F800000000000800000000000000000000000A1
+:104F90008000000000000000000000008000000011
+:104FA0000000000000000000800000000000000081
+:104FB0000000000080000000000000000000000071
+:104FC00080000000000000000000000080000000E1
+:104FD0000000000000000000800000000000000051
+:104FE0000000000080000000000000000000000041
+:104FF00080000000000000000000000080000000B1
+:105000000000000000000000800000000000000020
+:105010000000000080000000000000000000000010
+:105020008000000000000000000000008000000080
+:1050300000000000000000008000000000000000F0
+:1050400000000000800000000000000000000000E0
+:1050500080000000000000000000000000000000D0
+:1050600000000000000000008000000000000000C0
+:105070000000000000000000060205000000000023
+:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e1h-6.0.34.0.fw.ihex b/firmware/bnx2x/bnx2x-e1h-6.0.34.0.fw.ihex
deleted file mode 100644
index 54f36f1d256..00000000000
--- a/firmware/bnx2x/bnx2x-e1h-6.0.34.0.fw.ihex
+++ /dev/null
@@ -1,13178 +0,0 @@
-:1000000000004F48000000680000070C00004FB8D7
-:1000100000001ED4000056C800000094000075A027
-:1000200000009EFC00007638000000CC000115386E
-:100030000000DC6400011608000000940001F2706A
-:10004000000040180001F308000000A4000233285B
-:100050000000F378000233D000000FFC00032750AB
-:100060000000000400033750020400480000000FA5
-:1000700002040054000000450204005C0000000679
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040004000000FF02040008000000FF79
-:100170000204000C000000FF02040010000000FF59
-:10018000020400140000007F02040018000000FFB9
-:100190000204001C000000FF02040020000000FF19
-:1001A000020400240000003E0204002800000000B9
-:1001B0000204002C0000003F020400300000003F59
-:1001C000020400340000003F020400380000003F39
-:1001D0000204003C0000003F020400400000003F19
-:1001E000020400440000003F020404CC00000001AF
-:1001F00002042008000002110204200C000002008A
-:10020000020420100000020402042014000002195D
-:100210000204201C0000FFFF020420200000FFFF5A
-:10022000020420240000FFFF020420280000FFFF3A
-:1002300002042038000000200604203C0000001FBB
-:10024000020420B800000001060420BC0000005F8A
-:100250000204223807FFFFFF0204223C0000003F97
-:100260000204224007FFFFFF020422440000000FA7
-:1002700001042248000000000104224C000000009C
-:10028000010422500000000001042254000000007C
-:1002900001042258000000000104225C000000005C
-:1002A000010422600000000001042264000000003C
-:1002B00001042268000000000104226C000000001C
-:1002C00001042270000000000104227400000000FC
-:1002D00001042278000000000104227C00000000DC
-:1002E0000C042000000003E80A04200000000001C4
-:1002F0000B0420000000000A0605400000000D006D
-:100300000205004400000020020500480000003201
-:10031000020500900215002002050094021500203D
-:1003200002050098000000300205009C0810000043
-:10033000020500A000000033020500A40000003008
-:10034000020500A800000031020500AC0000000218
-:10035000020500B000000005020500B40000000620
-:10036000020500B800000002020500BC0000000207
-:10037000020500C000000000020500C400000005E6
-:10038000020500C800000002020500CC00000002C7
-:10039000020500D000000002020500D400000001A8
-:1003A00002050114000000010205011C000000010B
-:1003B0000205012000000002020502040000000105
-:1003C0000205020C0000004002050210000000407F
-:1003D0000205021C0000002002050220000000139C
-:1003E0000205022400000020060502400000000A69
-:1003F00004050280002000000205005000000007F4
-:10040000020500540000000702050058000000002B
-:100410000205005C00000008020500600000000109
-:100420000605006400000003020500D80000000675
-:1004300002050004000000010205000800000001A0
-:100440000205000C00000001020500100000000180
-:100450000205001400000001020500180000000160
-:100460000205001C00000001020500200000000140
-:100470000205002400000001020500280000000120
-:100480000205002C00000001020500300000000100
-:1004900002050034000000010205003800000001E0
-:1004A0000205003C000000010205004000000001C0
-:1004B000020500E00000000D020500E80000000059
-:1004C000020500F000000000020500F80000000036
-:1004D000020500E40000002D020500EC00000020F1
-:1004E000020500F400000020020500FC00000020CE
-:1004F000020500E00000001D020500E800000010F9
-:10050000020500F000000010020500F800000010D5
-:10051000020500E40000003D020500EC0000003090
-:10052000020500F400000030020500FC000000306D
-:10053000020500E00000004D020500E80000004058
-:10054000020500F000000040020500F80000004035
-:10055000020500E40000006D020500EC00000060F0
-:10056000020500F400000060020500FC00000060CD
-:10057000020500E00000005D020500E800000050F8
-:10058000020500F000000050020500F800000050D5
-:10059000020500E40000007D020500EC0000007090
-:1005A000020500F400000070020500FC000000706D
-:1005B0000406100002000020020600DC000000011A
-:1005C000010600D80000000004060200000302201B
-:1005D000020600DC00000000010600B80000000078
-:1005E000010600C8000000000206016C00000000C7
-:1005F000010600BC00000000010600CC0000000065
-:1006000002060170000000000718040000910000BD
-:10061000081807D800050223071C00002BDC000087
-:10062000071C80002DE90AF8071D00002F521673E1
-:10063000071D800015DB2248081DB0B049EA0225DD
-:100640000118000000000000011800040000000074
-:1006500001180008000000000118000C0000000054
-:100660000118001000000000011800140000000034
-:1006700002180020000000010218002400000002FF
-:1006800002180028000000030218002C00000000DF
-:1006900002180030000000040218003400000001BD
-:1006A00002180038000000000218003C00000001A1
-:1006B000021800400000000402180044000000007E
-:1006C00002180048000000010218004C000000035E
-:1006D0000218005000000000021800540000000141
-:1006E00002180058000000040218005C000000001E
-:1006F00002180060000000010218006400000003FE
-:1007000002180068000000000218006C00000001E0
-:1007100002180070000000040218007400000000BD
-:1007200002180078000000040218007C000000039A
-:100730000618008000000002021800A400003FFF1D
-:10074000021800A8000003FF0218022400000000A5
-:1007500002180234000000000218024C00000000E1
-:10076000021802E4000000FF061810000000040058
-:10077000021B8BC000000001021B8000000000343F
-:10078000021B804000000018021B80800000000C4B
-:10079000021B80C0000000200C1B83000007A1206A
-:1007A0000A1B8300000001380B1B83000000138824
-:1007B0000A1B8340000000000C1B8340000001F472
-:1007C0000B1B834000000005021B83800007A12053
-:1007D000021B83C0000001F4021B14800000000112
-:1007E0000A1B148000000000061A1000000003B36A
-:1007F000041A1ECC00010227061A1ED000000008B1
-:10080000061A2008000000C8061A20000000000296
-:10081000041AAF4000100228061A3718000000041E
-:10082000061A371000000002061A500000000002ED
-:10083000061A500800000004061A501800000004B0
-:10084000061A502800000004061A50380000000460
-:10085000061A504800000004061A50580000000410
-:10086000061A506800000004061A507800000002C2
-:10087000041A52C000020238061A40500000000656
-:10088000041A40680002023A041A40400004023C84
-:10089000041A800000010240061A800400000003D0
-:1008A000041A801000010241061A8014000000039F
-:1008B000041A802000010242061A8024000000036E
-:1008C000041A803000010243061A8034000000033D
-:1008D000041A804000010244061A8044000000030C
-:1008E000041A805000010245061A805400000003DB
-:1008F000041A806000010246061A806400000003AA
-:10090000041A807000010247061A80740000000378
-:10091000041A808000010248061A80840000000347
-:10092000041A809000010249061A80940000000316
-:10093000041A80A00001024A061A80A400000003E5
-:10094000041A80B00001024B061A80B400000003B4
-:10095000041A80C00001024C061A80C40000000383
-:10096000041A80D00001024D061A80D40000000352
-:10097000041A80E00001024E061A80E40000000321
-:10098000041A80F00001024F061A80F400000003F0
-:10099000041A810000010250061A810400000003BD
-:1009A000041A811000010251061A8114000000038C
-:1009B000041A812000010252061A8124000000035B
-:1009C000041A813000010253061A8134000000032A
-:1009D000041A814000010254061A814400000003F9
-:1009E000041A815000010255061A815400000003C8
-:1009F000041A816000010256061A81640000000397
-:100A0000041A817000010257061A81740000000365
-:100A1000041A818000010258061A81840000000334
-:100A2000041A819000010259061A81940000000303
-:100A3000041A81A00001025A061A81A400000003D2
-:100A4000041A81B00001025B061A81B400000003A1
-:100A5000041A81C00001025C061A81C40000000370
-:100A6000041A81D00001025D061A81D4000000033F
-:100A7000041A81E00001025E061A81E4000000030E
-:100A8000041A81F00001025F061A81F400000003DD
-:100A9000041A820000010260061A820400000003AA
-:100AA000041A821000010261061A82140000000379
-:100AB000041A822000010262061A82240000000348
-:100AC000041A823000010263061A82340000000317
-:100AD000041A824000010264061A824400000003E6
-:100AE000041A825000010265061A825400000003B5
-:100AF000041A826000010266061A82640000000384
-:100B0000041A827000010267061A82740000000352
-:100B1000041A828000010268061A82840000000321
-:100B2000041A829000010269061A829400000003F0
-:100B3000041A82A00001026A061A82A400000003BF
-:100B4000041A82B00001026B061A82B4000000038E
-:100B5000041A82C00001026C061A82C4000000035D
-:100B6000041A82D00001026D061A82D4000000032C
-:100B7000041A82E00001026E061A82E400000003FB
-:100B8000041A82F00001026F061A82F400000003CA
-:100B9000041A830000010270061A83040000000397
-:100BA000041A831000010271061A83140000000366
-:100BB000041A832000010272061A83240000000335
-:100BC000041A833000010273061A83340000000304
-:100BD000041A834000010274061A834400000003D3
-:100BE000041A835000010275061A835400000003A2
-:100BF000041A836000010276061A83640000000371
-:100C0000041A837000010277061A8374000000033F
-:100C1000041A838000010278061A8384000000030E
-:100C2000041A839000010279061A839400000003DD
-:100C3000041A83A00001027A061A83A400000003AC
-:100C4000041A83B00001027B061A83B4000000037B
-:100C5000041A83C00001027C061A83C4000000034A
-:100C6000041A83D00001027D061A83D40000000319
-:100C7000041A83E00001027E061A83E400000003E8
-:100C8000041A83F00001027F061A83F400000003B7
-:100C9000041A840000010280061A84040000000384
-:100CA000041A841000010281061A84140000000353
-:100CB000041A842000010282061A84240000000322
-:100CC000041A843000010283061A843400000003F1
-:100CD000041A844000010284061A844400000003C0
-:100CE000041A845000010285061A8454000000038F
-:100CF000041A846000010286061A8464000000035E
-:100D0000041A847000010287061A8474000000032C
-:100D1000041A848000010288061A848400000003FB
-:100D2000041A849000010289061A849400000003CA
-:100D3000041A84A00001028A061A84A40000000399
-:100D4000041A84B00001028B061A84B40000000368
-:100D5000041A84C00001028C061A84C40000000337
-:100D6000041A84D00001028D061A84D40000000306
-:100D7000041A84E00001028E061A84E400000003D5
-:100D8000041A84F00001028F061A84F400000003A4
-:100D9000041A850000010290061A85040000000371
-:100DA000041A851000010291061A85140000000340
-:100DB000041A852000010292061A8524000000030F
-:100DC000041A853000010293061A853400000003DE
-:100DD000041A854000010294061A854400000003AD
-:100DE000041A855000010295061A8554000000037C
-:100DF000041A856000010296061A8564000000034B
-:100E0000041A857000010297061A85740000000319
-:100E1000041A858000010298061A858400000003E8
-:100E2000041A859000010299061A859400000003B7
-:100E3000041A85A00001029A061A85A40000000386
-:100E4000041A85B00001029B061A85B40000000355
-:100E5000041A85C00001029C061A85C40000000324
-:100E6000041A85D00001029D061A85D400000003F3
-:100E7000041A85E00001029E061A85E400000003C2
-:100E8000041A85F00001029F061A85F40000000391
-:100E9000041A8600000102A0061A8604000000035E
-:100EA000041A8610000102A1061A8614000000032D
-:100EB000041A8620000102A2061A862400000003FC
-:100EC000041A8630000102A3061A863400000003CB
-:100ED000041A8640000102A4061A8644000000039A
-:100EE000041A8650000102A5061A86540000000369
-:100EF000041A8660000102A6061A86640000000338
-:100F0000041A8670000102A7061A86740000000306
-:100F1000041A8680000102A8061A868400000003D5
-:100F2000041A8690000102A9061A869400000003A4
-:100F3000041A86A0000102AA061A86A40000000373
-:100F4000041A86B0000102AB061A86B40000000342
-:100F5000041A86C0000102AC061A86C40000000311
-:100F6000041A86D0000102AD061A86D400000003E0
-:100F7000041A86E0000102AE061A86E400000003AF
-:100F8000041A86F0000102AF061A86F4000000037E
-:100F9000041A8700000102B0061A8704000000034B
-:100FA000041A8710000102B1061A8714000000031A
-:100FB000041A8720000102B2061A872400000003E9
-:100FC000041A8730000102B3061A873400000003B8
-:100FD000041A8740000102B4061A87440000000387
-:100FE000041A8750000102B5061A87540000000356
-:100FF000041A8760000102B6061A87640000000325
-:10100000041A8770000102B7061A877400000003F3
-:10101000041A8780000102B8061A878400000003C2
-:10102000041A8790000102B9061A87940000000391
-:10103000041A87A0000102BA061A87A40000000360
-:10104000041A87B0000102BB061A87B4000000032F
-:10105000041A87C0000102BC061A87C400000003FE
-:10106000041A87D0000102BD061A87D400000003CD
-:10107000041A87E0000102BE061A87E4000000039C
-:10108000041A87F0000102BF061A87F4000000036B
-:10109000041A8800000102C0061A88040000000338
-:1010A000041A8810000102C1061A88140000000307
-:1010B000041A8820000102C2061A882400000003D6
-:1010C000041A8830000102C3061A883400000003A5
-:1010D000041A8840000102C4061A88440000000374
-:1010E000041A8850000102C5061A88540000000343
-:1010F000041A8860000102C6061A88640000000312
-:10110000041A8870000102C7061A887400000003E0
-:10111000041A8880000102C8061A888400000003AF
-:10112000041A8890000102C9061A8894000000037E
-:10113000041A88A0000102CA061A88A4000000034D
-:10114000041A88B0000102CB061A88B4000000031C
-:10115000041A88C0000102CC061A88C400000003EB
-:10116000041A88D0000102CD061A88D400000003BA
-:10117000041A88E0000102CE061A88E40000000389
-:10118000041A88F0000102CF061A88F40000000358
-:10119000041A8900000102D0061A89040000000325
-:1011A000041A8910000102D1061A891400000003F4
-:1011B000041A8920000102D2061A892400000003C3
-:1011C000041A8930000102D3061A89340000000392
-:1011D000041A8940000102D4061A89440000000361
-:1011E000041A8950000102D5061A89540000000330
-:1011F000041A8960000102D6061A896400000003FF
-:10120000041A8970000102D7061A897400000003CD
-:10121000041A8980000102D8061A8984000000039C
-:10122000041A8990000102D9061A8994000000036B
-:10123000041A89A0000102DA061A89A4000000033A
-:10124000041A89B0000102DB061A89B40000000309
-:10125000041A89C0000102DC061A89C400000003D8
-:10126000041A89D0000102DD061A89D400000003A7
-:10127000041A89E0000102DE061A89E40000000376
-:10128000041A89F0000102DF061A89F40000000345
-:10129000041A8A00000102E0061A8A040000000312
-:1012A000041A8A10000102E1061A8A1400000003E1
-:1012B000041A8A20000102E2061A8A2400000003B0
-:1012C000041A8A30000102E3061A8A34000000037F
-:1012D000041A8A40000102E4061A8A44000000034E
-:1012E000041A8A50000102E5061A8A54000000031D
-:1012F000041A8A60000102E6061A8A6400000003EC
-:10130000041A8A70000102E7061A8A7400000003BA
-:10131000041A8A80000102E8061A8A840000000389
-:10132000041A8A90000102E9061A8A940000000358
-:10133000041A8AA0000102EA061A8AA40000000327
-:10134000041A8AB0000102EB061A8AB400000003F6
-:10135000041A8AC0000102EC061A8AC400000003C5
-:10136000041A8AD0000102ED061A8AD40000000394
-:10137000041A8AE0000102EE061A8AE40000000363
-:10138000041A8AF0000102EF061A8AF40000000332
-:10139000041A8B00000102F0061A8B0400000003FF
-:1013A000041A8B10000102F1061A8B1400000003CE
-:1013B000041A8B20000102F2061A8B24000000039D
-:1013C000041A8B30000102F3061A8B34000000036C
-:1013D000041A8B40000102F4061A8B44000000033B
-:1013E000041A8B50000102F5061A8B54000000030A
-:1013F000041A8B60000102F6061A8B6400000003D9
-:10140000041A8B70000102F7061A8B7400000003A7
-:10141000041A8B80000102F8061A8B840000000376
-:10142000041A8B90000102F9061A8B940000000345
-:10143000041A8BA0000102FA061A8BA40000000314
-:10144000041A8BB0000102FB061A8BB400000003E3
-:10145000041A8BC0000102FC061A8BC400000003B2
-:10146000041A8BD0000102FD061A8BD40000000381
-:10147000041A8BE0000102FE061A8BE40000000350
-:10148000041A8BF0000102FF061A8BF4000000031F
-:10149000041A8C0000010300061A8C0400000003EB
-:1014A000041A8C1000010301061A8C1400000003BA
-:1014B000041A8C2000010302061A8C240000000389
-:1014C000041A8C3000010303061A8C340000000358
-:1014D000041A8C4000010304061A8C440000000327
-:1014E000041A8C5000010305061A8C5400000003F6
-:1014F000041A8C6000010306061A8C6400000003C5
-:10150000041A8C7000010307061A8C740000000393
-:10151000041A8C8000010308061A8C840000000362
-:10152000041A8C9000010309061A8C940000000331
-:10153000041A8CA00001030A061A8CA40000000300
-:10154000041A8CB00001030B061A8CB400000003CF
-:10155000041A8CC00001030C061A8CC4000000039E
-:10156000041A8CD00001030D061A8CD4000000036D
-:10157000041A8CE00001030E061A8CE4000000033C
-:10158000041A8CF00001030F061A8CF4000000030B
-:10159000041A8D0000010310061A8D0400000003D8
-:1015A000041A8D1000010311061A8D1400000003A7
-:1015B000041A8D2000010312061A8D240000000376
-:1015C000041A8D3000010313061A8D340000000345
-:1015D000041A8D4000010314061A8D440000000314
-:1015E000041A8D5000010315061A8D5400000003E3
-:1015F000041A8D6000010316061A8D6400000003B2
-:10160000041A8D7000010317061A8D740000000380
-:10161000041A8D8000010318061A8D84000000034F
-:10162000041A8D9000010319061A8D94000000031E
-:10163000041A8DA00001031A061A8DA400000003ED
-:10164000041A8DB00001031B061A8DB400000003BC
-:10165000041A8DC00001031C061A8DC4000000038B
-:10166000041A8DD00001031D061A8DD4000000035A
-:10167000041A8DE00001031E061A8DE40000000329
-:10168000041A8DF00001031F061A8DF400000003F8
-:10169000041A8E0000010320061A8E0400000003C5
-:1016A000041A8E1000010321061A8E140000000394
-:1016B000041A8E2000010322061A8E240000000363
-:1016C000041A8E3000010323061A8E340000000332
-:1016D000041A8E4000010324061A8E440000000301
-:1016E000041A8E5000010325061A8E5400000003D0
-:1016F000041A8E6000010326061A8E64000000039F
-:10170000041A8E7000010327061A8E74000000036D
-:10171000041A8E8000010328061A8E84000000033C
-:10172000041A8E9000010329061A8E94000000030B
-:10173000041A8EA00001032A061A8EA400000003DA
-:10174000041A8EB00001032B061A8EB400000003A9
-:10175000041A8EC00001032C061A8EC40000000378
-:10176000041A8ED00001032D061A8ED40000000347
-:10177000041A8EE00001032E061A8EE40000000316
-:10178000041A8EF00001032F061A8EF400000003E5
-:10179000041A8F0000010330061A8F0400000003B2
-:1017A000041A8F1000010331061A8F140000000381
-:1017B000041A8F2000010332061A8F240000000350
-:1017C000041A8F3000010333061A8F34000000031F
-:1017D000041A8F4000010334061A8F4400000003EE
-:1017E000041A8F5000010335061A8F5400000003BD
-:1017F000041A8F6000010336061A8F64000000038C
-:10180000041A8F7000010337061A8F74000000035A
-:10181000041A8F8000010338061A8F840000000329
-:10182000041A8F9000010339061A8F9400000003F8
-:10183000041A8FA00001033A061A8FA400000003C7
-:10184000041A8FB00001033B061A8FB40000000396
-:10185000041A8FC00001033C061A8FC40000000365
-:10186000041A8FD00001033D061A8FD40000000334
-:10187000041A8FE00001033E061A8FE400000007FF
-:10188000041A62C00020033F061AD0000000007254
-:10189000061AD24800000010061AD6B00000002038
-:1018A000061AD47000000090061AD46800000002E6
-:1018B000061AA000000001C4061A30000000001043
-:1018C000061A308000000010061A310000000010D7
-:1018D000061A318000000010061A330000000012C2
-:1018E000061A339000000070061AD4580000000257
-:1018F000061AD34800000002061AD3580000002040
-:10190000061AA710000001C4061A3040000000109B
-:10191000061A30C000000010061A31400000001006
-:10192000061A31C000000010061A334800000012E9
-:10193000061A355000000070061AD460000000023C
-:10194000061AD35000000002061AD3D80000002067
-:10195000021AAE2000000000061A5000000000022B
-:10196000061A508000000012041A40000002035FB3
-:10197000041A63C000020361061A7000000000042C
-:10198000061A320000000008021AAE24000000000F
-:10199000061A501000000002061A50C8000000127B
-:1019A000041A400800020363041A63C800020365B6
-:1019B000061A701000000004061A32200000000809
-:1019C000021AAE2800000000061A50200000000293
-:1019D000061A511000000012041A4010000203679A
-:1019E000041A63D000020369061A70200000000484
-:1019F000061A324000000008021AAE2C0000000057
-:101A0000061A503000000002061A51580000001259
-:101A1000041A40180002036B041A63D80002036D15
-:101A2000061A703000000004061A32600000000838
-:101A3000021AAE3000000000061A504000000002FA
-:101A4000061A51A000000012041A40200002036F81
-:101A5000041A63E000020371061A704000000004DB
-:101A6000061A328000000008021AAE34000000009E
-:101A7000061A505000000002061A51E80000001239
-:101A8000041A402800020373041A63E80002037575
-:101A9000061A705000000004061A32A00000000868
-:101AA000021AAE3800000000061A50600000000262
-:101AB000061A523000000012041A40300002037768
-:101AC000041A63F000020379061A70600000000433
-:101AD000061A32C000000008021AAE3C00000000E6
-:101AE000061A507000000002061A52780000001218
-:101AF000041A40380002037B041A63F80002037DD5
-:101B0000061A707000000004061A32E00000000897
-:101B10000200A468000B01C80200A294071D29114D
-:101B20000200A298000000000200A29C009C042475
-:101B30000200A2A0000000000200A2A4000002090E
-:101B40000200A270000000000200A2740000000069
-:101B50000200A270000000000200A2740000000059
-:101B60000200A270000000000200A2740000000049
-:101B70000200A270000000000200A2740000000039
-:101B8000020160A000000001020160A400000262E6
-:101B9000020160A800000002020160AC0000001811
-:101BA0000201620400000001020100B40000000113
-:101BB000020100B800000001020100DC0000000189
-:101BC0000201010000000001020101040000000107
-:101BD0000201007C003000000201008400000028A7
-:101BE0000201008C0000000002010130000000042E
-:101BF0000201025C00000001020103280000000055
-:101C0000020160580000FFFF020160700000000741
-:101C10000201608000000001020105540000003054
-:101C2000020100C400000001020100CC000000011C
-:101C3000020100F800000001020100F000000001B4
-:101C4000020100800030000002010088000000282E
-:101C500002010090000000000201013400000004B5
-:101C6000020102DC000000010201032C0000000060
-:101C70000201605C0000FFFF0201607400000007C9
-:101C800002016084000000010201056400000030D0
-:101C9000020100C800000001020100D000000001A4
-:101CA000020100FC00000001020100F4000000013C
-:101CB000020C100000000028020C20080000021195
-:101CC000020C200C00000200020C20100000020494
-:101CD000020C201C0000FFFF020C20200000FFFF70
-:101CE000020C20240000FFFF020C20280000FFFF50
-:101CF000020C203800000020020C203C00000021D3
-:101D0000020C204000000022020C204400000023AE
-:101D1000020C204800000024020C204C000000258A
-:101D2000020C205000000026020C20540000002766
-:101D3000020C205800000028020C205C0000002942
-:101D4000020C20600000002A020C20640000002B1E
-:101D5000020C20680000002C020C206C0000002DFA
-:101D6000020C20700000002E020C20740000002FD6
-:101D7000020C207800000010060C207C00000007F8
-:101D8000020C209800000011020C209C00000012A0
-:101D9000020C20A000000013060C20A40000001D6F
-:101DA000020C211800000001020C211C000000019F
-:101DB000020C212000000001060C21240000001D5F
-:101DC000020C219800000001060C219C0000000775
-:101DD000020C21B800000001020C21BC000000012F
-:101DE000020C21C000000001020C21C4000000010F
-:101DF000020C21C800000001020C21CC00000001EF
-:101E0000020C21D000000001020C21D400000001CE
-:101E1000020C21D800000001020C21DC00000001AE
-:101E2000020C21E000000001020C21E4000000018E
-:101E3000020C21E800000001020C21EC000000016E
-:101E4000020C21F000000001020C21F4000000014E
-:101E5000020C21F800000001060C21FC0000000724
-:101E6000020C221800000001060C221C00000007D2
-:101E7000020C223807FFFFFF020C223C0000003F4B
-:101E8000020C224007FFFFFF020C22440000000F5B
-:101E9000010C224800000000010C224C0000000050
-:101EA000010C225000000000010C22540000000030
-:101EB000010C225800000000010C225C0000000010
-:101EC000010C226000000000010C226400000000F0
-:101ED000010C226800000000010C226C00000000D0
-:101EE000010C227000000000010C227400000000B0
-:101EF000010C227800000000010C227C0000000090
-:101F00000C0C2000000003E80A0C20000000000177
-:101F10000B0C20000000000A020C40080000101109
-:101F2000020C400C00001000020C401000001004D5
-:101F3000020C401400001021020C401C0000FFFFA6
-:101F4000020C40200000FFFF020C40240000FFFFB5
-:101F5000020C40280000FFFF020C40380000004641
-:101F6000020C403C00000010060C40400000000243
-:101F7000020C404800000018020C404C000000F029
-:101F8000060C40500000001F020C40CC0000000175
-:101F9000060C40D00000003A020C41B800000001DD
-:101FA000060C41BC00000003020C41C80000000107
-:101FB000020C41CC00000001060C41D00000001AC8
-:101FC000020C423807FFFFFF020C423C0000003FBA
-:101FD000020C424007FFFFFF020C42440000000FCA
-:101FE000010C424800000000010C424C00000000BF
-:101FF000010C425000000000010C4254000000009F
-:10200000010C425800000000010C425C000000007E
-:10201000010C426000000000010C4264000000005E
-:10202000010C426800000000010C426C000000003E
-:10203000010C427000000000010C4274000000001E
-:10204000010C427800000000010C427C00000000FE
-:10205000010C4280000000000C0C4000000003E86E
-:102060000A0C4000000000010B0C40000000000AB8
-:10207000060D400000000A00020D0044000000327E
-:10208000020D008C02150020020D009002150020A8
-:10209000020D009408100000020D009800000033AB
-:1020A000020D009C00000002020D00A000000000D4
-:1020B000020D00A400000005020D00A800000005AC
-:1020C000060D00AC00000002020D00B4000000028A
-:1020D000020D00B800000003020D00BC0000000269
-:1020E000020D00C000000001020D00C80000000247
-:1020F000020D00CC00000002020D015C0000000196
-:10210000020D016400000001020D016800000002E0
-:10211000020D020400000001020D020C000000206C
-:10212000020D021000000040020D021400000040E9
-:10213000020D022000000003020D0224000000181E
-:10214000060D028000000012040D03000018037F3A
-:10215000060D03600000000C020D004C00000001A1
-:10216000020D005000000002020D005400000000AB
-:10217000020D005800000008060D005C000000047D
-:10218000020D00C400000004020D00040000000164
-:10219000020D000800000001020D000C000000010B
-:1021A000020D001000000001020D001400000001EB
-:1021B000020D001800000001020D001C00000001CB
-:1021C000020D002000000001020D002400000001AB
-:1021D000020D002800000001020D002C000000018B
-:1021E000020D003000000001020D0034000000016B
-:1021F000020D003800000001020D003C000000014B
-:10220000020D011400000009020D011C0000000A6B
-:10221000020D012400000000020D012C000000004E
-:10222000020D013400000000020D013C0000000B13
-:10223000020D014400000000020D011800000029F9
-:10224000020D01200000002A020D012800000020DC
-:10225000020D013000000020020D013800000020B6
-:10226000020D01400000002B020D0148000000207B
-:10227000020D011400000019020D011C0000001ADB
-:10228000020D012400000010020D012C00000010BE
-:10229000020D013400000010020D013C0000001B83
-:1022A000020D014400000010020D01180000003969
-:1022B000020D01200000003A020D0128000000304C
-:1022C000020D013000000030020D01380000003026
-:1022D000020D01400000003B020D014800000030EB
-:1022E000020D011400000049020D011C0000004A0B
-:1022F000020D012400000040020D012C00000040EE
-:10230000020D013400000040020D013C0000004BB2
-:10231000020D014400000040020D01180000006998
-:10232000020D01200000006A020D0128000000607B
-:10233000020D013000000060020D01380000006055
-:10234000020D01400000006B020D0148000000601A
-:10235000020D011400000059020D011C0000005A7A
-:10236000020D012400000050020D012C000000505D
-:10237000020D013400000050020D013C0000005B22
-:10238000020D014400000050020D01180000007908
-:10239000020D01200000007A020D012800000070EB
-:1023A000020D013000000070020D013800000070C5
-:1023B000020D01400000007B020D0148000000708A
-:1023C000060E200000000800020E004C0000003243
-:1023D000020E009402150020020E00980215002043
-:1023E000020E009C00000030020E00A00810000049
-:1023F000020E00A400000033020E00A8000000300E
-:10240000020E00AC00000031020E00B0000000021D
-:10241000020E00B400000004020E00B8000000002C
-:10242000020E00BC00000002020E00C0000000020C
-:10243000020E00C400000000020E00C800000002EE
-:10244000020E00CC00000007020E00D000000002C7
-:10245000020E00D400000002020E00D800000001AD
-:10246000020E014400000001020E014C00000001B8
-:10247000020E015000000002020E020400000001E2
-:10248000020E020C00000040020E0210000000408C
-:10249000020E021C00000004020E022000000020B8
-:1024A000020E02240000000E020E02280000001B93
-:1024B000060E030000000012040E0280001B0397AA
-:1024C000060E02EC00000005020E00540000000C95
-:1024D000020E00580000000C020E005C000000001C
-:1024E000020E006000000010020E006400000010E8
-:1024F000060E006800000003020E00DC000000036E
-:10250000020E000400000001020E0008000000019D
-:10251000020E000C00000001020E0010000000017D
-:10252000020E001400000001020E0018000000015D
-:10253000020E001C00000001020E0020000000013D
-:10254000020E002400000001020E0028000000011D
-:10255000020E002C00000001020E003000000001FD
-:10256000020E003400000001020E003800000001DD
-:10257000020E003C00000001020E004000000001BD
-:10258000020E004400000001020E01100000000FC6
-:10259000020E011800000000020E012000000000E1
-:1025A000020E012800000000020E01140000002F9E
-:1025B000020E011C00000020020E01240000000099
-:1025C000020E012C00000000020E01100000001F8E
-:1025D000020E011800000010020E01200000000091
-:1025E000020E012800000000020E01140000003F4E
-:1025F000020E011C00000030020E01240000000049
-:10260000020E012C00000000020E01100000004F1D
-:10261000020E011800000040020E01200000000020
-:10262000020E012800000000020E01140000006FDD
-:10263000020E011C00000060020E012400000000D8
-:10264000020E012C00000000020E01100000005FCD
-:10265000020E011800000050020E012000000000D0
-:10266000020E012800000000020E01140000007F8D
-:10267000020E011C00000070020E01240000000088
-:10268000020E012C000000000730040000C800000A
-:10269000083007D8000503B207340000332C0000CF
-:1026A0000734800030AC0CCC07350000353318F807
-:1026B000073580002A7126450736000018DA30E217
-:1026C00008364670373203B40130000000000000C5
-:1026D000013000040000000001300008000000008C
-:1026E0000130000C0000000001300010000000006C
-:1026F0000130001400000000023000200000000142
-:102700000230002400000002023000280000000314
-:102710000230002C000000000230003000000004F5
-:1027200002300034000000010230003800000000D8
-:102730000230003C000000010230004000000004B4
-:102740000230004400000000023000480000000198
-:102750000230004C00000003023000500000000076
-:102760000230005400000001023000580000000454
-:102770000230005C00000000023000600000000138
-:102780000230006400000003023000680000000016
-:102790000230006C000000010230007000000004F4
-:1027A00002300074000000000230007800000004D5
-:1027B0000230007C000000030630008000000002B0
-:1027C000023000A400003FFF023000A8000003FF19
-:1027D0000230022400000000023002340000000039
-:1027E0000230024C00000000023002E40000FFFF53
-:1027F000063020000000080002338BC000000001FA
-:10280000023380000000001A023380400000004EB6
-:102810000233808000000010023380C000000020DE
-:102820000C3383000007A1200A3383000000013825
-:102830000B338300000013880A338340000000003C
-:102840000C338340000001F40B338340000000058B
-:10285000023383800007A120023383C0000001F40B
-:1028600002331480000000010A33148000000000CD
-:10287000063280000000010206322008000000C875
-:10288000063220000000000204328EA0001003B6C1
-:1028900006323EB00000000606323ED800000002BC
-:1028A00006323E800000000A04323EA8000203C641
-:1028B00006323E00000000200632500000000400F6
-:1028C0000632400000000004043274C0000203C855
-:1028D00006324110000000020632D0000000003035
-:1028E0000632DD40000000440632DA00000000D06D
-:1028F0000632DEA0000000020632E0000000080000
-:1029000006328450000001180632100000000188D1
-:102910000632500000000020063251000000002066
-:102920000632520000000020063253000000002052
-:10293000063254000000002006325500000000203E
-:10294000063256000000002006325700000000202A
-:102950000632580000000020063259000000002016
-:1029600006325A000000002006325B000000002002
-:1029700006325C000000002006325D0000000020EE
-:1029800006325E000000002006325F0000000020DA
-:1029900006328DF00000000204328E00000203CAED
-:1029A00006328E08000000020632DE9000000002AF
-:1029B00006321C4000000038063288B000000118C2
-:1029C00006321620000001880632508000000020E8
-:1029D00006325180000000200632528000000020A4
-:1029E0000632538000000020063254800000002090
-:1029F000063255800000002006325680000000207C
-:102A00000632578000000020063258800000002067
-:102A1000063259800000002006325A800000002053
-:102A200006325B800000002006325C80000000203F
-:102A300006325D800000002006325E80000000202B
-:102A400006325F800000002006328DF80000000290
-:102A500004328E10000203CC06328E1800000002F1
-:102A60000632DE980000000206321D200000003809
-:102A700002328D50000000000632401000000002BB
-:102A800002328D5400000000063240200000000297
-:102A900002328D5800000000063240300000000273
-:102AA00002328D5C0000000006324040000000024F
-:102AB00002328D600000000006324050000000022B
-:102AC00002328D6400000000063240600000000207
-:102AD00002328D68000000000632407000000002E3
-:102AE00002328D6C000000000632408000000002BF
-:102AF000072004000091000008200780001003CE8A
-:102B0000072400002B0B00000724800015080AC3CF
-:102B10000824AA10692403D001200000000000004E
-:102B20000120000400000000012000080000000057
-:102B30000120000C00000000012000100000000037
-:102B4000012000140000000002200020000000010D
-:102B500002200024000000020220002800000003E0
-:102B60000220002C000000000220003000000004C1
-:102B700002200034000000010220003800000000A4
-:102B80000220003C00000001022000400000000480
-:102B90000220004400000000022000480000000164
-:102BA0000220004C00000003022000500000000042
-:102BB0000220005400000001022000580000000420
-:102BC0000220005C00000000022000600000000104
-:102BD00002200064000000030220006800000000E2
-:102BE0000220006C000000010220007000000004C0
-:102BF00002200074000000000220007800000004A1
-:102C00000220007C0000000306200080000000027B
-:102C1000022000A400003FFF022000A8000003FFE4
-:102C20000220022400000000022002340000000004
-:102C30000220024C00000000022002E40000FFFF1E
-:102C4000062020000000080002238BC000000001C5
-:102C500002238000000000100223804000000012C8
-:102C60000223808000000030022380C00000000E9C
-:102C70000C2383000007A1200A23830000000138F1
-:102C80000B238300000013880A2383400000000008
-:102C90000C238340000001F40B2383400000000557
-:102CA000022383800007A120022383C0000001F4D7
-:102CB00002231480000000010A2314800000000099
-:102CC000062210000000004206222008000000C872
-:102CD00006222000000000020622B000000000C60C
-:102CE0000422B318000503D20622B32C0000000B07
-:102CF0000422B358000503D70622B36C0000000B72
-:102D00000422B398000503DC0622B3AC0000000BDC
-:102D10000422B3D8000503E10622B3EC0000000B47
-:102D20000422B418000503E60622B42C0000000BB0
-:102D30000422B458000503EB0622B46C0000000B1B
-:102D40000422B498000503F00622B4AC0000000B86
-:102D50000422B4D8000503F50622B4EC0000000BF1
-:102D60000422B518000503FA0622B52C0000000B5A
-:102D70000422B558000503FF0622B56C0000000BC5
-:102D80000422B598000504040622B5AC0000000B2F
-:102D90000422B5D8000504090622B5EC0000000B9A
-:102DA0000422B6180005040E0622B62C0000000B03
-:102DB0000422B658000504130622B66C0000000B6E
-:102DC0000422B698000504180622B6AC0000000BD9
-:102DD0000422B6D80005041D0622B6EC0000000B44
-:102DE0000422B718000504220622B72C0000000BAD
-:102DF0000422B758000504270622B76C0000000B18
-:102E00000422B7980005042C0622B7AC0000000B82
-:102E10000422B7D8000504310622B7EC0000000BED
-:102E20000422B818000504360622B82C0000000B56
-:102E30000422B8580005043B0622B86C0000000BC1
-:102E40000422B898000504400622B8AC0000000B2C
-:102E50000422B8D8000504450622B8EC0000000B97
-:102E60000422B9180005044A0622B92C0000000B00
-:102E70000422B9580005044F0622B96C0000000B6B
-:102E80000422B998000504540622B9AC0000000BD6
-:102E90000422B9D8000504590622B9EC0000000B41
-:102EA0000422BA180005045E0622BA2C0000000BAA
-:102EB0000422BA58000504630622BA6C0000000B15
-:102EC0000422BA98000504680622BAAC0000000B80
-:102ED0000422BAD80005046D0622BAEC00000005F1
-:102EE0000622BB00000000530422BC4C0001047207
-:102EF0000622BC50000000030422BC5C00010473E5
-:102F00000622BC60000000030422BC6C00010474B3
-:102F10000622BC70000000030422BC7C0001047582
-:102F20000622BC80000000030422BC8C0001047651
-:102F30000622BC90000000030422BC9C0001047720
-:102F40000622BCA0000000030422BCAC00010478EF
-:102F50000622BCB0000000030422BCBC00010479BE
-:102F60000622880000000100062280000000020006
-:102F7000042212700010047A06223000000000C003
-:102F800006226700000001000622900000000400F5
-:102F900004226B080020048A022212C0FFFFFFFFF8
-:102FA000062211E800000002062212C800000009F3
-:102FB000062212EC0000000906228C000000000826
-:102FC0000222114800000000062213200000000623
-:102FD000062233000000000206226040000000309C
-:102FE00006228C20000000080222114C0000000084
-:102FF00006221338000000060622330800000002F3
-:10300000062261000000003006228C40000000080B
-:10301000022211500000000006221350000000069A
-:103020000622331000000002062261C000000030BA
-:1030300006228C60000000080222115400000000EB
-:103040000622136800000006062233180000000262
-:10305000062262800000003006228C8000000008FA
-:103060000222115800000000062213800000000612
-:1030700006223320000000020622634000000030D8
-:1030800006228CA0000000080222115C0000000053
-:1030900006221398000000060622332800000002D2
-:1030A000062264000000003006228CC000000008E8
-:1030B0000222116000000000062213B0000000068A
-:1030C0000622333000000002062264C000000030F7
-:1030D00006228CE0000000080222116400000000BB
-:1030E000062213C800000006062233380000000242
-:1030F0000622658000000030021610000000002843
-:1031000002170008000000020217002C0000000354
-:103110000217003C000000040217004800000002F3
-:103120000217004C000000900217005000000090B1
-:103130000217005400800090021700580810000089
-:10314000021700600000008A02170064000000807F
-:1031500002170068000000810217006C0000008068
-:10316000021700700000000602170078000007D068
-:103170000217007C0000076C02170038007C100466
-:10318000021700040000000F061640240000000291
-:10319000021640700000001C0216420800000001E8
-:1031A0000216421000000001021642200000000139
-:1031B0000216422800000001021642300000000101
-:1031C00002164238000000010216426000000002B0
-:1031D0000C16401C0003D0900A16401C0000009CF6
-:1031E0000B16401C000009C4021640300000000805
-:1031F000021640340000000C021640380000001097
-:1032000002164044000000200216400000000001A9
-:10321000021640D80000000102164008000000011C
-:103220000216400C000000010216401000000001D0
-:103230000216424000000000021642480000000052
-:103240000616427000000002021642500000000004
-:1032500002164258000000000616428000000002DC
-:1032600002166008000012240216600C0000121002
-:1032700002166010000012140216601C0000FFFF0E
-:10328000021660200000FFFF021660240000FFFF0E
-:10329000021660280000FFFF0216603800000020C0
-:1032A0000216603C0000002006166040000000028C
-:1032B00002166048000000230216604C0000002443
-:1032C000021660500000002502166054000000261F
-:1032D00002166058000000270216605C00000029FA
-:1032E000021660600000002A021660640000002BD5
-:1032F000021660680000002C0216606C0000002DB1
-:1033000002166070000000EC0216607400000011EC
-:1033100002166078000000120616607C0000000FA4
-:10332000021660B800000001021660BC0000000137
-:10333000061660C00000000C021660F000000001DC
-:10334000061660F400000031021661B800000001AA
-:10335000061661BC0000000D021661F000000001BD
-:10336000061661F4000000110216623807FFFFFF25
-:103370000216623C0000003F0216624007FFFFFF9A
-:10338000021662440000000F0116624800000000AF
-:103390000116624C0000000001166250000000009F
-:1033A000011662540000000001166258000000007F
-:1033B0000116625C0000000001166260000000005F
-:1033C000011662640000000001166268000000003F
-:1033D0000116626C0000000001166270000000001F
-:1033E00001166274000000000116627800000000FF
-:1033F0000116627C000000000C166000000003E86B
-:103400000A166000000000010B1660000000000AB0
-:1034100002168040000000060216804400000005ED
-:10342000021680480000000A0216804C00000005C9
-:103430000216805400000002021680CC0000000436
-:10344000021680D000000004021680D400000004A0
-:10345000021680D800000004021680DC0000000480
-:10346000021680E000000004021680E40000000460
-:10347000021680E800000004021688040000000420
-:10348000021680300000007C021680340000003DEF
-:10349000021680380000003F0216803C0000009CAD
-:1034A000021680F000000007061680F400000005F8
-:1034B0000216880C010101010216810800000000BB
-:1034C0000216810C000000040216811000000004A6
-:1034D0000216811400000002021688100801200460
-:1034E00002168118000000050216811C000000056C
-:1034F000021681200000000502168124000000054C
-:103500000216882C200810010216812800000008ED
-:103510000216812C00000006021681300000000710
-:1035200002168134000000000216883001010120DB
-:1035300006168138000000040216883401010101DA
-:1035400002168148000000000216814C00000004B1
-:10355000021681500000000402168154000000028F
-:103560000216883808012004021681580000000560
-:103570000216815C00000005021681600000000553
-:1035800002168164000000050216883C2008100124
-:1035900002168168000000080216816C0000000617
-:1035A00002168170000000070216817400000001FD
-:1035B00002168840010101200216817800000001F6
-:1035C0000216817C000000010216818000000001CB
-:1035D00002168184000000010216884401010101E5
-:1035E00002168188000000010216818C0000000490
-:1035F000021681900000000402168194000000026F
-:10360000021688480801200402168198000000056F
-:103610000216819C00000005021681A00000000532
-:10362000021681A40000000502168814200810016B
-:10363000021681A800000008021681AC00000006F6
-:10364000021681B000000007021681B400000001DC
-:103650000216881801010120021681B8000000013D
-:10366000021681BC00000001021681C000000001AA
-:10367000021681C4000000010216881C010101012C
-:10368000021681C800000001021681CC000000046F
-:10369000021681D000000004021681D4000000024E
-:1036A0000216882008012004021681D800000005B7
-:1036B000021681DC00000005021681E00000000512
-:1036C000021681E40000000502168824200810017B
-:1036D000021681E800000008021681EC00000006D6
-:1036E000021681F0000000070216E40C0000000042
-:1036F00002168828010101200616E41000000004CB
-:103700000216E000010101010216E42000000000A1
-:103710000216E424000000040216E428000000045D
-:103720000216E42C000000020216E0040801200446
-:103730000216E430000000050216E4340000000523
-:103740000216E438000000050216E43C0000000503
-:103750000216E008200810010216E44000000008EC
-:103760000216E444000000060216E44800000007C8
-:103770000216E44C000000000216E00C01010120DA
-:103780000616E450000000040216E01001010101D9
-:103790000216E460000000000216E4640000000469
-:1037A0000216E468000000040216E46C0000000247
-:1037B0000216E014080120040216E470000000055F
-:1037C0000216E474000000050216E478000000050B
-:1037D0000216E47C000000050216E0182008100123
-:1037E0000216E480000000080216E48400000006CF
-:1037F0000216E488000000070216E48C00000001B5
-:103800000216E01C010101200216E49000000001F4
-:103810000216E494000000010216E4980000000182
-:103820000216E49C000000010216E02001010101E3
-:103830000216E4A0000000010216E4A40000000447
-:103840000216E4A8000000040216E4AC0000000226
-:103850000216E024080120040216E4B0000000056E
-:103860000216E4B4000000050216E4B800000005EA
-:103870000216E4BC000000050216E0282008100132
-:103880000216E4C0000000080216E4C400000006AE
-:103890000216E4C8000000070216E4CC0000000194
-:1038A0000216E02C010101200216E4D00000000104
-:1038B0000216E4D4000000010216E4D80000000162
-:1038C0000216E4DC000000010216E03001010101F3
-:1038D0000216E4E0000000010216E4E40000000427
-:1038E0000216E4E8000000040216E4EC0000000206
-:1038F0000216E034080120040216E4F0000000057E
-:103900000216E4F4000000050216E4F800000005C9
-:103910000216E4FC000000050216E0382008100141
-:103920000216E500000000080216E504000000068B
-:103930000216E508000000070216E03C0101012024
-:1039400002168240003F003F021682440000000041
-:103950000216E524003F003F0216E52800000000A3
-:1039600002168248000000000216824C003F003F11
-:103970000216E52C000000000216E530003F003F73
-:10398000021682500100010002168254010001005B
-:103990000216E534010001000216E53801000100BD
-:1039A00006168258000000020216E53C00000000E6
-:1039B0000216E540000000000216826000C000C050
-:1039C0000216826400C000C00216E54400C000C0B8
-:1039D0000216E54800C000C0021682681E001E00E4
-:1039E0000216826C1E001E000216E54C1E001E0010
-:1039F0000216E5501E001E000216827040004000B4
-:103A000002168274400040000216E5544000400057
-:103A10000216E558400040000216827880008000BF
-:103A20000216827C800080000216E55C8000800027
-:103A30000216E560800080000216828020002000CF
-:103A400002168284200020000216E5642000200077
-:103A50000216E56820002000061682880000000299
-:103A60000216E56C000000000216E5700000000080
-:103A700002168290000000000216829400000000EE
-:103A80000216E574000000000216E5780000000050
-:103A900002168298000000000216829C00000000BE
-:103AA0000216E57C000000000216E5800000000020
-:103AB000021682A000000000021682A4000000018D
-:103AC000061682A80000000A021681F400000C0805
-:103AD000021681F800000040021681FC000001007F
-:103AE0000216820000000020021682040000001767
-:103AF00002168208000000800216820C00000200FC
-:103B000002168210000000000216821801FF01FF59
-:103B10000216821401FF01FF0216E51001FF01FFEA
-:103B20000216E50C01FF01FF0216823C00000013A3
-:103B3000021680900000013F0216806000000140E4
-:103B40000216806400000140061680680000000232
-:103B500002168070000000C0061680740000000786
-:103B60000216809C00000048021680A00000004859
-:103B7000061680A400000002021680AC0000004877
-:103B8000061680B000000007021682380000800090
-:103B900002168234000025E40216809400007FFFA4
-:103BA00002168220000F000F0216821C000F000F69
-:103BB0000216E518000F000F0216E514000F000FA3
-:103BC000021682280000000002168224FFFFFFFF79
-:103BD0000216E520000000000216E51CFFFFFFFFB3
-:103BE0000216E6BC000000000216E6C0000000025B
-:103BF0000216E6C4000000010216E6C80000000339
-:103C00000216E6CC000000040216E6D00000000612
-:103C10000216E6D4000000050216E6D800000007F0
-:103C2000021680EC000000FF0214000000000001FA
-:103C30000214000C0000000102140040000000010A
-:103C40000214004400007FFF0214000C000000007A
-:103C500002140000000000000214006C00000000CC
-:103C600002140004000000010214003000000001F2
-:103C700002140004000000000214005C00000000B8
-:103C800002140008000000010214003400000001CA
-:103C90000214000800000000021400600000000090
-:103CA00006028000000020000202005800000032DE
-:103CB000020200A003150020020200A40315002048
-:103CC000020200A801000030020200AC081000004F
-:103CD000020200B000000033020200B40000003015
-:103CE000020200B800000031020200BC0000000324
-:103CF000020200C000000006020200C4000000032F
-:103D0000020200C800000003020200CC0000000212
-:103D1000020200D000000000020200D400000002F5
-:103D2000020200DC00000000020200E000000006C9
-:103D3000020200E400000004020200E800000002A9
-:103D4000020200EC00000002020200F0000000018C
-:103D5000020200FC00000006020201200000000038
-:103D60000202013400000002020201B00000000162
-:103D70000202020C00000001020202140000000115
-:103D80000202021800000002020204040000000106
-:103D90000202040C00000040020204100000004077
-:103DA0000202041C000000040202042000000020A3
-:103DB0000202042400000002020204280000002085
-:103DC000060205000000001204020480002004AA7C
-:103DD000020200600000000F020200640000000701
-:103DE00002020068000000000202006C0000000EE9
-:103DF000020200700000000E0602007400000003C2
-:103E0000020200F4000000040202000400000001AD
-:103E100002020008000000010202000C0000000184
-:103E20000202001000000001020200140000000164
-:103E300002020018000000010202001C0000000144
-:103E40000202002000000001020200240000000124
-:103E500002020028000000010202002C0000000104
-:103E600002020030000000010202003400000001E4
-:103E700002020038000000010202003C00000001C4
-:103E800002020040000000010202004400000001A4
-:103E900002020048000000010202004C0000000184
-:103EA000020200500000000102020108000000C8E8
-:103EB0000202011800000002020201C4000000001A
-:103EC000020201CC00000000020201D40000000246
-:103ED000020201DC00000002020201E4000000FF17
-:103EE000020201EC000000FF0202010000000000DD
-:103EF0000202010C000000C80202011C00000002C6
-:103F0000020201C800000000020201D0000000000F
-:103F1000020201D800000002020201E000000002DB
-:103F2000020201E8000000FF020201F0000000FFB1
-:103F3000020201040000000002020108000000C8A3
-:103F40000202011800000002020201C40000000089
-:103F5000020201CC00000000020201D400000002B5
-:103F6000020201DC00000002020201E4000000FF86
-:103F7000020201EC000000FF02020100000000004C
-:103F80000202010C000000C80202011C0000000235
-:103F9000020201C800000000020201D0000000007F
-:103FA000020201D800000002020201E0000000024B
-:103FB000020201E8000000FF020201F0000000FF21
-:103FC000020201040000000002020108000000C813
-:103FD0000202011800000002020201C400000000F9
-:103FE000020201CC00000000020201D40000000225
-:103FF000020201DC00000002020201E4000000FFF6
-:10400000020201EC000000FF0202010000000000BB
-:104010000202010C000000C80202011C00000002A4
-:10402000020201C800000000020201D000000000EE
-:10403000020201D800000002020201E000000002BA
-:10404000020201E8000000FF020201F0000000FF90
-:10405000020201040000000002020108000000C882
-:104060000202011800000002020201C40000000068
-:10407000020201CC00000000020201D40000000294
-:10408000020201DC00000002020201E4000000FF65
-:10409000020201EC000000FF02020100000000002B
-:1040A0000202010C000000C80202011C0000000214
-:1040B000020201C800000000020201D0000000005E
-:1040C000020201D800000002020201E0000000022A
-:1040D000020201E8000000FF020201F0000000FF00
-:1040E00002020104000000000728040000A10000F3
-:1040F000082807B8000904CA072C000034F700009C
-:10410000072C800039250D3E072D000037CD1B8878
-:10411000072D80003292297C072E00001AF33621E9
-:10412000082E4390378E04CC0128000000000000C8
-:104130000128000400000000012800080000000021
-:104140000128000C00000000012800100000000001
-:1041500001280014000000000228002000000001D7
-:1041600002280024000000020228002800000003AA
-:104170000228002C0000000002280030000000048B
-:10418000022800340000000102280038000000006E
-:104190000228003C0000000102280040000000044A
-:1041A000022800440000000002280048000000012E
-:1041B0000228004C0000000302280050000000000C
-:1041C00002280054000000010228005800000004EA
-:1041D0000228005C000000000228006000000001CE
-:1041E00002280064000000030228006800000000AC
-:1041F0000228006C0000000102280070000000048A
-:10420000022800740000000002280078000000046A
-:104210000228007C00000003062800800000000245
-:10422000022800A400003FFF022800A8000003FFAE
-:1042300002280224000000000228023400000000CE
-:104240000228024C00000000022802E40000FFFFE8
-:104250000628200000000800022B8BC0000000018F
-:10426000022B800000000000022B8040000000189C
-:10427000022B80800000000C022B80C00000006632
-:104280000C2B83000007A1200A2B830000000138BB
-:104290000B2B8300000013880A2B834000000000D2
-:1042A0000C2B8340000001F40B2B83400000000521
-:1042B000022B83800007A120022B83C0000001F4A1
-:1042C000022B1480000000010A2B14800000000063
-:1042D000062A9AF800000004042A9B08000204CE73
-:1042E000062A9B1000000006062A90800000004865
-:1042F000062A2008000000C8062A2000000000024C
-:10430000062A91A800000086062A900000000020DE
-:10431000062A93C800000003042A93D4000104D0A5
-:10432000062A9DA800000002042A9498000404D1E3
-:10433000042A9D58000104D5062A9D5C0000001146
-:10434000042ACB20001004D6042A3000000204E620
-:10435000062A300800000100062A40400000001034
-:10436000042A4000001004E8042A8408000204F82B
-:10437000062A9DA000000002062AB000000000509E
-:10438000062ABB7000000070062AB150000000022F
-:10439000062ABB6000000004062AD00000000800C6
-:1043A000062AC00000000150062A94A8000000322E
-:1043B000062A502000000002062A503000000002A9
-:1043C000062A500000000002062A501000000002D9
-:1043D000022A520800000001042A9B28000204FA65
-:1043E000062A963800000022042A96C0000104FC28
-:1043F000062A96C400000003062A976800000022DF
-:10440000042A97F0000104FD062A97F40000000337
-:10441000062A989800000022042A9920000104FE30
-:10442000062A992400000003062A99C800000022E9
-:10443000042A9A50000104FF062A9A54000000033F
-:10444000062AB14000000002062AC54000000150C3
-:10445000062A957000000032062A5028000000024B
-:10446000062A503800000002062A50080000000208
-:10447000062A501800000002022A520C0000000117
-:10448000042A9B3000020500062A96D00000002274
-:10449000042A975800010502062A975C00000003D1
-:1044A000062A980000000022042A988800010503CB
-:1044B000062A988C00000003062A9930000000228A
-:1044C000042A99B800010504062A99BC00000003DB
-:1044D000062A9A6000000022042A9AE800010505D5
-:1044E000062A9AEC00000003062AB14800000002E8
-:1044F000022ACA8000000000042A9B38001005062A
-:10450000062A50480000000E022ACA84000000005B
-:10451000042A9B7800100516062A50800000000E21
-:10452000022ACA8800000000042A9BB80010052651
-:10453000062A50B80000000E022ACA8C00000000B3
-:10454000042A9BF800100536062A50F00000000EE1
-:10455000022ACA9000000000042A9C380010054678
-:10456000062A51280000000E022ACA94000000000A
-:10457000042A9C7800100556062A51600000000E9F
-:10458000022ACA9800000000042A9CB800100566A0
-:10459000062A51980000000E022ACA9C0000000062
-:1045A000042A9CF800100576062A51D00000000E5F
-:1045B000021010080000000102101050000000015D
-:1045C000021010000003D000021010040000003D93
-:1045D0000910180002000586091011000010078656
-:1045E0000610114000000008091011600010079625
-:1045F000061011A00000001806102400000000E0C2
-:104600000210201C00000000021020200000000109
-:10461000021020C00000000202102004000000016F
-:10462000021020080000000109103C00000507A648
-:1046300009103800000507AB09103820000507B045
-:1046400006104C000000010002104028000000107D
-:104650000210404400003FFF0210405800280000B4
-:10466000021040840084924A02104058000000006A
-:104670000210800000001080021080AC00000000DA
-:1046800002108038000000100210810000000000BD
-:10469000061081200000000202108008000002B510
-:1046A0000210801000000000061082000000004A86
-:1046B000021081080001FFFF061081400000000287
-:1046C0000210800000001A800610900000000024F4
-:1046D000061091200000004A061093700000004A66
-:1046E000061095C00000004A0210800400001080EF
-:1046F000021080B0000000010210803C0000001099
-:104700000210810400000000061081280000000251
-:104710000210800C000002B502108014000000009E
-:10472000061084000000004A0210810C0001FFFF07
-:1047300006108148000000020210800400001A8068
-:104740000610909000000024061092480000004AD5
-:10475000061094980000004A061096E80000004AEF
-:104760000210800000001080021080AC00000002E7
-:1047700002108038000000100210810000000000CC
-:10478000061081200000000202108008000002B51F
-:104790000210801000000000061082000000004A95
-:1047A000021081080001FFFF061081400000000296
-:1047B0000210800000001A80061090000000002403
-:1047C000061091200000004A061093700000004A75
-:1047D000061095C00000004A0210800400001080FE
-:1047E000021080B0000000030210803C00000010A6
-:1047F0000210810400000000061081280000000261
-:104800000210800C000002B50210801400000000AD
-:10481000061084000000004A0210810C0001FFFF16
-:1048200006108148000000020210800400001A8077
-:104830000610909000000024061092480000004AE4
-:10484000061094980000004A061096E80000004AFE
-:104850000210800000001080021080AC00000004F4
-:1048600002108038000000100210810000000000DB
-:10487000061081200000000202108008000002B52E
-:104880000210801000000000061082000000004AA4
-:10489000021081080001FFFF0610814000000002A5
-:1048A0000210800000001A80061090000000002412
-:1048B000061091200000004A061093700000004A84
-:1048C000061095C00000004A02108004000010800D
-:1048D000021080B0000000050210803C00000010B3
-:1048E0000210810400000000061081280000000270
-:1048F0000210800C000002B50210801400000000BD
-:10490000061084000000004A0210810C0001FFFF25
-:1049100006108148000000020210800400001A8086
-:104920000610909000000024061092480000004AF3
-:10493000061094980000004A061096E80000004A0D
-:104940000210800000001080021080AC0000000601
-:1049500002108038000000100210810000000000EA
-:10496000061081200000000202108008000002B53D
-:104970000210801000000000061082000000004AB3
-:10498000021081080001FFFF0610814000000002B4
-:104990000210800000001A80061090000000002421
-:1049A000061091200000004A061093700000004A93
-:1049B000061095C00000004A02108004000010801C
-:1049C000021080B0000000070210803C00000010C0
-:1049D000021081040000000006108128000000027F
-:1049E0000210800C000002B50210801400000000CC
-:1049F000061084000000004A0210810C0001FFFF35
-:104A000006108148000000020210800400001A8095
-:104A10000610909000000024061092480000004A02
-:104A2000061094980000004A061096E80000004A1C
-:104A3000021205B0000000010212049000E383405E
-:104A40000212051400003C100212066C0000000166
-:104A5000021206700000000002120494FFFFFFFF24
-:104A600002120498FFFFFFFF0212049CFFFFFFFFEA
-:104A7000021204A0FFFFFFFF021204A4FFFFFFFFCA
-:104A8000021204A8FFFFFFFF021204ACFFFFFFFFAA
-:104A9000021204B0FFFFFFFF021204BCFFFFFFFF82
-:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
-:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
-:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
-:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
-:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
-:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
-:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
-:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
-:104B200002120504FFFFFFFF02120508FFFFFFFF4F
-:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
-:104B4000021204D4FF809000021204B4F00050005E
-:104B5000021204B8F00010000212039000000008D6
-:104B60000212039C00000008021203A000000008CB
-:104B7000021203A400000002021203BC00000004A1
-:104B8000021203C000000005021203C4000000046A
-:104B9000021203D0000000000212036C00000001AA
-:104BA000021203680000003F021201BC0000004036
-:104BB000021201C000001808021201C4000008031C
-:104BC000021201C800000803021201CC00000040DC
-:104BD000021201D000000003021201D400000803F9
-:104BE000021201D800000803021201DC00000803D1
-:104BF000021201E000010003021201E400000803B8
-:104C0000021201E800000803021201EC0000000398
-:104C1000021201F000000003021201F40000000380
-:104C2000021201F800000003021201FC0000000360
-:104C3000021202000000000302120204000000033E
-:104C400002120208000000030212020C000000031E
-:104C500002120210000000030212021400000003FE
-:104C600002120218000000030212021C00000003DE
-:104C700002120220000000030212022400000003BE
-:104C800002120228000024030212022C0000002F4E
-:104C90000212023000000009021202340000001962
-:104CA00002120238000001840212023C000001835B
-:104CB0000212024000000306021202440000001922
-:104CC00002120248000000060212024C0000030615
-:104CD00002120250000003060212025400000306F2
-:104CE0000212025800000C860212025C0000030649
-:104CF00002120260000003060212026400000006B5
-:104D000002120268000000060212026C0000000697
-:104D10000212027000000006021202740000000677
-:104D200002120278000000060212027C0000000657
-:104D30000212028000000006021202840000000637
-:104D400002120288000000060212028C0000000617
-:104D500002120290000000060212029400000006F7
-:104D600002120298000000060212029C00000006D7
-:104D7000021202A000000306021202A400000013A7
-:104D8000021202A800000006021202B00000100485
-:104D9000021202B400001004021203240010644046
-:104DA0000212032800106440021205B40000000142
-:104DB000021201B0000000010600A0000000000C7B
-:104DC0000200A050000000000200A05400000000FB
-:104DD0000200A0EC555400000200A0F055555555B6
-:104DE0000200A0F4000055550200A0F8F0000000F9
-:104DF0000200A0FC555400000200A1005555555575
-:104E00000200A104000055550200A108F0000000B6
-:104E10000200A18C555400000200A1905555555533
-:104E20000200A194000055550200A198F000000076
-:104E30000200A19C000000000200A1A000010000EF
-:104E40000200A1A4000050140200A1A8000000006C
-:104E50000200A45C00000C000200A61C000000037D
-:104E60000200A06CFF5C00000200A070FFF55FFF75
-:104E70000200A0740000FFFF0200A078F00003E031
-:104E80000200A07C000000000200A0800000A00042
-:104E90000600A084000000050200A0980FE00000BA
-:104EA0000600A09C000000070200A0B8000004005B
-:104EB0000600A0BC000000030200A0C80000100013
-:104EC0000600A0CC000000030200A0D800004000B3
-:104ED0000600A0DC000000030200A0E800010000C2
-:104EE0000600A22C000000040200A10CFF5C0000E0
-:104EF0000200A110FFF55FFF0200A1140000FFFFF8
-:104F00000200A118F00003E00200A11C0000000054
-:104F10000200A1200000A0000600A124000000055E
-:104F20000200A1380FE000000600A13C00000007CD
-:104F30000200A158000008000600A15C0000000368
-:104F40000200A168000020000600A16C0000000320
-:104F50000200A178000080000600A17C0000000390
-:104F60000200A188000200000600A23C000000042C
-:104F70000200A030000000000200A0340000000089
-:104F80000200A038000000000200A03C0000000069
-:104F90000200A040000000000200A0440000000049
-:104FA0000200A048000000000200A04C0000000029
-:104FB00000000000000000000000003000000000C1
-:104FC00000000000000000000000000000000000E1
-:104FD00000000000000000000000000000000000D1
-:104FE0000000000000300031000000000000000060
-:104FF00000000000000000000000000000000000B1
-:1050000000000000000000000000000000000000A0
-:10501000003100520000000000000000000000000D
-:105020000000000000000000000000000000000080
-:105030000000000000000000000000000052008995
-:1050400000000000000000000089008D008D00912C
-:1050500000910095009500990099009D009D00A188
-:1050600000A100A500A500A900A900AE00AE00B1F6
-:1050700000B100B4000000000000000000000000CB
-:105080000000000000000000000000000000000020
-:105090000000000000B40309030903130313031DF8
-:1050A000031D03240324032B032B03320332033990
-:1050B00003390340034003470347034E034E0355A0
-:1050C00000000000000000000000000000000000E0
-:1050D00000000000000000000000000000000000D0
-:1050E00000000000000000000000000000000000C0
-:1050F00000000000000000000000000000000000B0
-:10510000000000000000000000000000000000009F
-:10511000000000000000000000000000000000008F
-:10512000000000000000000000000000000000007F
-:10513000000000000000000000000000000000006F
-:10514000000000000000000000000000000000005F
-:10515000000000000000000000000000000000004F
-:10516000000000000000000000000000000000003F
-:105170000355035B0000000000000000035B035CBC
-:10518000035C035D035D035E035E035F035F036017
-:1051900003600361036103620362036300000000B4
-:1051A00000000000000000000000000000000000FF
-:1051B00000000000000000000000000000000000EF
-:1051C00000000000000000000363036D036D037B1B
-:1051D000037B0389000000000000000000000000C5
-:1051E00000000000000000000000000000000000BF
-:1051F00000000000000000000000000000000000AF
-:10520000000000000000000000000000000000009E
-:10521000000000000000000000000000000000008E
-:105220000389038A00000000000000000000000065
-:10523000000000000000000000000000000000006E
-:10524000000000000000000000000000038A03D6F8
-:10525000000000000000000000000000000000004E
-:10526000000000000000000000000000000000003E
-:10527000000000000000000003D604010000000050
-:10528000000000000000000000000000000000001E
-:10529000000000000000000000000000000000000E
-:1052A00000000000040104330000000000000000C2
-:1052B0000433043A043A0441044104480448044FC6
-:1052C000044F04560456045D045D04640464046BD6
-:1052D000046B04A4000000000000000004A404A863
-:1052E00004A804AC04AC04B004B004B404B404B81E
-:1052F00004B804BC04BC04C004C004C404C4051342
-:105300000513052A052A05410541054305430545C1
-:1053100005450547054705490549054B054B054D1D
-:10532000054D054F054F0551055105E805E805E90F
-:1053300005E905EA05EA05EF05EF05F405F405F9C9
-:1053400005F905FE05FE0603060306080608060D18
-:10535000060D0612061206130000000000000000F1
-:10536000000000000000000000000000000000003D
-:10537000000000000000000000000000000000002D
-:1053800006130624000000000000000000000000DA
-:10539000000000000000000000000000000000000D
-:1053A0000000000000000000000000000624063994
-:1053B0000639063C063C063F0000000000000000E5
-:1053C00000000000000000000000000000000000DD
-:1053D0000000000000000000063F0675000000000D
-:1053E00000000000000000000000000000000000BD
-:1053F00000000000000000000000000000000000AD
-:1054000000000000067507780000000000000000A2
-:10541000000000000000000000000000000000008C
-:10542000000000000000000000000000000000007C
-:105430000778077F077F078307830787000000003F
-:10544000000000000000000000000000000000005C
-:10545000000000000000000000000000078707C8EF
-:10546000000000000000000007C807D107D107DADC
-:1054700007DA07E307E307EC07EC07F507F507FE94
-:1054800007FE080708070810081008670867087C67
-:10549000087C089108910894089408970897089A3E
-:1054A000089A089D089D08A008A008A308A308A6BC
-:1054B00008A608A908A908B2000000000000000022
-:1054C00000000000000000000000000000000000DC
-:1054D00000000000000000000000000000000000CC
-:1054E00008B208B800000000000000000000000042
-:1054F00000000000000000000000000000000000AC
-:1055000000000000000000000000000008B808BB18
-:10551000000000000000000000000000000000008B
-:10552000000000000000000000000000000000007B
-:10553000000000000000000008BB08C100000000DF
-:10554000000000000000000000000000000000005B
-:10555000000000000000000000000000000000004B
-:10556000000000000000000000000000000000003B
-:1055700008C108D008D008DF08DF08EE08EE08FDF3
-:1055800008FD090C090C091B091B092A092A0939FC
-:10559000093909AA00000000000000000000000016
-:1055A00000000000000000000000000000000000FB
-:1055B00000000000000000000000000009AA09BF70
-:1055C00009BF09D009D009E109E109E209E209E3CB
-:1055D00009E309E409E409E509E509E609E609E75B
-:1055E00009E709E809E809E90000000000000000F7
-:1055F00000000000000000000000000000000000AB
-:10560000000000000000000000000000000000009A
-:10561000000000000000000000000000000000008A
-:10562000000000000000000000000000000000007A
-:10563000000000000000000000000000000000006A
-:10564000000000000000000000000000000000005A
-:10565000000000000000000000000000000000004A
-:10566000000000000000000000000000000000003A
-:10567000000000000000000000000000000000002A
-:10568000000000000000000000000000000000001A
-:10569000000000000000000000000000000000000A
-:1056A00000000000000000000000000000000000FA
-:1056B00000000000000000000000000000000000EA
-:1056C000000000000000000000010000000204C013
-:1056D0000003098000040E4000051300000617C0F7
-:1056E00000071C800008214000092600000A2AC08B
-:1056F000000B2F80000C3440000D3900000E3DC01F
-:10570000000F42800010474000114C00001250C0B2
-:105710000013558000145A4000155F00001663C046
-:105720000017688000186D4000197200001A76C0DA
-:10573000001B7B80001C8040001D8500001E89C06E
-:10574000001F8E80000093400000200000004000F9
-:1057500000006000000080000000A0000000C00009
-:105760000000E000000100000001200000014000F6
-:1057700000016000000180000001A0000001C000E5
-:105780000001E000000200000002200000024000D2
-:1057900000026000000280000002A0000002C000C1
-:1057A0000002E000000300000003200000034000AE
-:1057B00000036000000380000003A0000003C0009D
-:1057C0000003E0000004000000042000000440008A
-:1057D00000046000000480000004A0000004C00079
-:1057E0000004E00000050000000520000005400066
-:1057F00000056000000580000005A0000005C00055
-:105800000005E00000060000000620000006400041
-:1058100000066000000680000006A0000006C00030
-:105820000006E0000007000000072000000740001D
-:1058300000076000000780000007A0000007C0000C
-:105840000007E000000800000008200000084000F9
-:1058500000086000000880000008A0000008C000E8
-:105860000008E000000900000009200000094000D5
-:1058700000096000000980000009A0000009C000C4
-:105880000009E000000A0000000A2000000A4000B1
-:10589000000A6000000A8000000AA000000AC000A0
-:1058A000000AE000000B0000000B2000000B40008D
-:1058B000000B6000000B8000000BA000000BC0007C
-:1058C000000BE000000C0000000C2000000C400069
-:1058D000000C6000000C8000000CA000000CC00058
-:1058E000000CE000000D0000000D2000000D400045
-:1058F000000D6000000D8000000DA000000DC00034
-:10590000000DE000000E0000000E2000000E400020
-:10591000000E6000000E8000000EA000000EC0000F
-:10592000000EE000000F0000000F2000000F4000FC
-:10593000000F6000000F8000000FA000000FC000EB
-:10594000000FE000001000000010200000104000D8
-:1059500000106000001080000010A0000010C000C7
-:105960000010E000001100000011200000114000B4
-:1059700000116000001180000011A0000011C000A3
-:105980000011E00000120000001220000012400090
-:1059900000126000001280000012A0000012C0007F
-:1059A0000012E0000013000000132000001340006C
-:1059B00000136000001380000013A0000013C0005B
-:1059C0000013E00000140000001420000014400048
-:1059D00000146000001480000014A0000014C00037
-:1059E0000014E00000150000001520000015400024
-:1059F00000156000001580000015A0000015C00013
-:105A00000015E000001600000016200000164000FF
-:105A100000166000001680000016A0000016C000EE
-:105A20000016E000001700000017200000174000DB
-:105A300000176000001780000017A0000017C000CA
-:105A40000017E000001800000018200000184000B7
-:105A500000186000001880000018A0000018C000A6
-:105A60000018E00000190000001920000019400093
-:105A700000196000001980000019A0000019C00082
-:105A80000019E000001A0000001A2000001A40006F
-:105A9000001A6000001A8000001AA000001AC0005E
-:105AA000001AE000001B0000001B2000001B40004B
-:105AB000001B6000001B8000001BA000001BC0003A
-:105AC000001BE000001C0000001C2000001C400027
-:105AD000001C6000001C8000001CA000001CC00016
-:105AE000001CE000001D0000001D2000001D400003
-:105AF000001D6000001D8000001DA000001DC000F2
-:105B0000001DE000001E0000001E2000001E4000DE
-:105B1000001E6000001E8000001EA000001EC000CD
-:105B2000001EE000001F0000001F2000001F4000BA
-:105B3000001F6000001F8000001FA000001FC000A9
-:105B4000001FE00000200000002020000020400096
-:105B500000206000002080000020A0000020C00085
-:105B60000020E00000210000002120000021400072
-:105B700000216000002180000021A0000021C00061
-:105B80000021E0000022000000222000002240004E
-:105B900000226000002280000022A0000022C0003D
-:105BA0000022E0000023000000232000002340002A
-:105BB00000236000002380000023A0000023C00019
-:105BC0000023E00000240000002420000024400006
-:105BD00000246000002480000024A0000024C000F5
-:105BE0000024E000002500000025200000254000E2
-:105BF00000256000002580000025A0000025C000D1
-:105C00000025E000002600000026200000264000BD
-:105C100000266000002680000026A0000026C000AC
-:105C20000026E00000270000002720000027400099
-:105C300000276000002780000027A0000027C00088
-:105C40000027E00000280000002820000028400075
-:105C500000286000002880000028A0000028C00064
-:105C60000028E00000290000002920000029400051
-:105C700000296000002980000029A0000029C00040
-:105C80000029E000002A0000002A2000002A40002D
-:105C9000002A6000002A8000002AA000002AC0001C
-:105CA000002AE000002B0000002B2000002B400009
-:105CB000002B6000002B8000002BA000002BC000F8
-:105CC000002BE000002C0000002C2000002C4000E5
-:105CD000002C6000002C8000002CA000002CC000D4
-:105CE000002CE000002D0000002D2000002D4000C1
-:105CF000002D6000002D8000002DA000002DC000B0
-:105D0000002DE000002E0000002E2000002E40009C
-:105D1000002E6000002E8000002EA000002EC0008B
-:105D2000002EE000002F0000002F2000002F400078
-:105D3000002F6000002F8000002FA000002FC00067
-:105D4000002FE00000300000003020000030400054
-:105D500000306000003080000030A0000030C00043
-:105D60000030E00000310000003120000031400030
-:105D700000316000003180000031A0000031C0001F
-:105D80000031E0000032000000322000003240000C
-:105D900000326000003280000032A0000032C000FB
-:105DA0000032E000003300000033200000334000E8
-:105DB00000336000003380000033A0000033C000D7
-:105DC0000033E000003400000034200000344000C4
-:105DD00000346000003480000034A0000034C000B3
-:105DE0000034E000003500000035200000354000A0
-:105DF00000356000003580000035A0000035C0008F
-:105E00000035E0000036000000362000003640007B
-:105E100000366000003680000036A0000036C0006A
-:105E20000036E00000370000003720000037400057
-:105E300000376000003780000037A0000037C00046
-:105E40000037E00000380000003820000038400033
-:105E500000386000003880000038A0000038C00022
-:105E60000038E0000039000000392000003940000F
-:105E700000396000003980000039A0000039C000FE
-:105E80000039E000003A0000003A2000003A4000EB
-:105E9000003A6000003A8000003AA000003AC000DA
-:105EA000003AE000003B0000003B2000003B4000C7
-:105EB000003B6000003B8000003BA000003BC000B6
-:105EC000003BE000003C0000003C2000003C4000A3
-:105ED000003C6000003C8000003CA000003CC00092
-:105EE000003CE000003D0000003D2000003D40007F
-:105EF000003D6000003D8000003DA000003DC0006E
-:105F0000003DE000003E0000003E2000003E40005A
-:105F1000003E6000003E8000003EA000003EC00049
-:105F2000003EE000003F0000003F2000003F400036
-:105F3000003F6000003F8000003FA000003FC00025
-:105F4000003FE000003FE00100000000000001FF12
-:105F50000000020000007FF800007FF80000014010
-:105F600000003500000000010000FF0000000000FC
-:105F70000000FF00000000000000FF000000000023
-:105F80000000FF00000000000000FF000000000013
-:105F90000000FF00000000000000FF000000000003
-:105FA0000000FF000000000000000000140AFF00D5
-:105FB00000000001000000000020100100000000AF
-:105FC0000100900000000100000090020000900419
-:105FD00000009006000090080000900A0000900C5D
-:105FE0000000900E0000901000009012000090142D
-:105FF00000009016000090180000901A0000901CFD
-:106000000000901E000090200000902200009024CC
-:1060100000009026000090280000902A0000902C9C
-:106020000000902E0000903000009032000090346C
-:1060300000009036000090380000903A0000903C3C
-:106040000000903E0000904000009042000090440C
-:1060500000009046000090480000904A0000904CDC
-:106060000000904E000090500000905200009054AC
-:1060700000009056000090580000905A0000905C7C
-:106080000000905E0000906000009062000090644C
-:1060900000009066000090680000906A0000906C1C
-:1060A0000000906E000090700000907200009074EC
-:1060B00000009076000090780000907A0000907CBC
-:1060C0000000907E0000908000009082000090848C
-:1060D00000009086000090880000908A0000908C5C
-:1060E0000000908E0000909000009092000090942C
-:1060F00000009096000090980000909A0000909CFC
-:106100000000909E000090A0000090A2000090A4CB
-:10611000000090A6000090A8000090AA000090AC9B
-:10612000000090AE000090B0000090B2000090B46B
-:10613000000090B6000090B8000090BA000090BC3B
-:10614000000090BE000090C0000090C2000090C40B
-:10615000000090C6000090C8000090CA000090CCDB
-:10616000000090CE000090D0000090D2000090D4AB
-:10617000000090D6000090D8000090DA000090DC7B
-:10618000000090DE000090E0000090E2000090E44B
-:10619000000090E6000090E8000090EA000090EC1B
-:1061A000000090EE000090F0000090F2000090F4EB
-:1061B000000090F6000090F8000090FA000090FCBB
-:1061C000000090FE00009100000091020000910488
-:1061D00000009106000091080000910A0000910C57
-:1061E0000000910E00009110000091120000911427
-:1061F00000009116000091180000911A0000911CF7
-:106200000000911E000091200000912200009124C6
-:1062100000009126000091280000912A0000912C96
-:106220000000912E00009130000091320000913466
-:1062300000009136000091380000913A0000913C36
-:106240000000913E00009140000091420000914406
-:1062500000009146000091480000914A0000914CD6
-:106260000000914E000091500000915200009154A6
-:1062700000009156000091580000915A0000915C76
-:106280000000915E00009160000091620000916446
-:1062900000009166000091680000916A0000916C16
-:1062A0000000916E000091700000917200009174E6
-:1062B00000009176000091780000917A0000917CB6
-:1062C0000000917E00009180000091820000918486
-:1062D00000009186000091880000918A0000918C56
-:1062E0000000918E00009190000091920000919426
-:1062F00000009196000091980000919A0000919CF6
-:106300000000919E000091A0000091A2000091A4C5
-:10631000000091A6000091A8000091AA000091AC95
-:10632000000091AE000091B0000091B2000091B465
-:10633000000091B6000091B8000091BA000091BC35
-:10634000000091BE000091C0000091C2000091C405
-:10635000000091C6000091C8000091CA000091CCD5
-:10636000000091CE000091D0000091D2000091D4A5
-:10637000000091D6000091D8000091DA000091DC75
-:10638000000091DE000091E0000091E2000091E445
-:10639000000091E6000091E8000091EA000091EC15
-:1063A000000091EE000091F0000091F2000091F4E5
-:1063B000000091F6000091F8000091FA000091FCB5
-:1063C000000091FEFFFFFFFFFFFFFFFFFFFFFFFF4A
-:1063D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
-:1063E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
-:1063F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
-:10640000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C
-:10641000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
-:10642000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C
-:10643000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
-:10644000FFFFFFFF0000000300BEBC2000000000B3
-:10645000000000050000000300BEBC20000000009A
-:10646000000000050000000300BEBC20000000008A
-:10647000000000050000000300BEBC20000000007A
-:10648000000000050000000300BEBC20000000006A
-:10649000000000050000000300BEBC20000000005A
-:1064A000000000050000000300BEBC20000000004A
-:1064B000000000050000000300BEBC20000000003A
-:1064C0000000000500002000000040C000006180C6
-:1064D000000082400000A3000000C3C00000E48070
-:1064E0000001054000012600000146C00001678050
-:1064F000000188400001A9000001C9C00001EA8034
-:1065000000020B4000022C0000024CC000026D8013
-:1065100000028E400002AF000002CFC00002F080F7
-:10652000000011400000800000010380000187008E
-:1065300000020A8000028E00000311800003950013
-:106540000004188000049C0000051F800005A300C3
-:10655000000626800006AA0000072D800007B10073
-:10656000000834800008B80000093B800009BF0023
-:10657000000A4280000AC600000B4980000BCD00D3
-:10658000000C5080000CD400000D578000005B0010
-:1065900000007FF800007FF8000000D50000150023
-:1065A0000000FF00000000000000FF0000000000ED
-:1065B0000000FF00000000000000FF0000000000DD
-:1065C0000000FF00000000000000FF0000000000CD
-:1065D0000000FF00000000000000FF0000000000BD
-:1065E000000019000000000000000000FFFFFFFF96
-:1065F0000000000003938700000000000393870061
-:1066000000007FF800007FF80000069200001500EF
-:106610000000FF000FFFFFFF0000FF000FFFFFFF64
-:10662000000000FF0000FF000FFFFFFF0000FF0061
-:106630000FFFFFFF000000FF0000FF000FFFFFFF44
-:106640000000FF000FFFFFFF000000FF0000FF0041
-:106650000FFFFFFF0000FF000FFFFFFF000000FF24
-:106660000000FF000FFFFFFF0000FF000FFFFFFF14
-:10667000000000FF0000FF000FFFFFFF0000FF0011
-:106680000FFFFFFF000000FF0000FF000FFFFFFFF4
-:106690000000FF000FFFFFFF000000FF0000FF00F1
-:1066A0000FFFFFFF0000FF000FFFFFFF000000FFD4
-:1066B0000000FF000FFFFFFF0000FF000FFFFFFFC4
-:1066C000000000FF0000FF000FFFFFFF0000FF00C1
-:1066D0000FFFFFFF000000FF0000FF000FFFFFFFA4
-:1066E0000000FF000FFFFFFF000000FF0000FF00A1
-:1066F0000FFFFFFF0000FF000FFFFFFF000000FF84
-:106700000000FF000FFFFFFF0000FF000FFFFFFF73
-:10671000000000FF0000FF000FFFFFFF0000FF0070
-:106720000FFFFFFF000000FF0000FF000FFFFFFF53
-:106730000000FF000FFFFFFF000000FF0000FF0050
-:106740000FFFFFFF0000FF000FFFFFFF000000FF33
-:106750000000FF000FFFFFFF0000FF000FFFFFFF23
-:10676000000000FF0000FF000FFFFFFF0000FF0020
-:106770000FFFFFFF000000FF0000FF000FFFFFFF03
-:106780000000FF000FFFFFFF000000FF0000FF0000
-:106790000FFFFFFF0000FF000FFFFFFF000000FFE3
-:1067A0000000FF000FFFFFFF0000FF000FFFFFFFD3
-:1067B000000000FF0000FF000FFFFFFF0000FF00D0
-:1067C0000FFFFFFF000000FF0000FF000FFFFFFFB3
-:1067D0000000FF000FFFFFFF000000FF0000FF00B0
-:1067E0000FFFFFFF0000FF000FFFFFFF000000FF93
-:1067F0000000FF000FFFFFFF0000FF000FFFFFFF83
-:10680000000000FF0000FF000FFFFFFF0000FF007F
-:106810000FFFFFFF000000FF0000FF000FFFFFFF62
-:106820000000FF000FFFFFFF000000FF0000FF005F
-:106830000FFFFFFF0000FF000FFFFFFF000000FF42
-:106840000000FF000FFFFFFF0000FF000FFFFFFF32
-:10685000000000FF0000FF000FFFFFFF0000FF002F
-:106860000FFFFFFF000000FF0000FF000FFFFFFF12
-:106870000000FF000FFFFFFF000000FF0000FF000F
-:106880000FFFFFFF0000FF000FFFFFFF000000FFF2
-:10689000000000FF000000FF000000FF000000FFFC
-:1068A000000000FF000000FF000000FF000000FFEC
-:1068B0000000FF00000000000000FF0000000000DA
-:1068C0000000FF00000000000000FF0000000000CA
-:1068D0000000FF00000000000000FF0000000000BA
-:1068E0000000FF00000000000000FF0000000000AA
-:1068F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
-:10690000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
-:10691000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
-:10692000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
-:10693000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
-:10694000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
-:10695000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
-:10696000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
-:106970000000100000002080000031000000418075
-:10698000000052000000628000007300000083805D
-:10699000000094000000A4800000B5000000C58045
-:1069A0000000D6000000E6800000F700000107802C
-:1069B0000001180000012880000139000001498011
-:1069C00000015A0000016A8000017B0000018B80F9
-:1069D00000019C000001AC800001BD000001CD80E1
-:1069E0000001DE000001EE800001FF0000000F80CA
-:1069F00000007FF800007FF8000003400000150051
-:106A000010000000000028AD000100010022000677
-:106A1000CCCCCCC5FFFFFFFFFFFFFFFF7058103C41
-:106A20000000FF00000000000000FF000000000068
-:106A30000000FF00000000000000FF000000000058
-:106A40000000FF00000000000000FF000000000048
-:106A50000000FF00000000000000FF000000000038
-:106A60000000000000000001CCCC0201CCCCCCCC5A
-:106A7000CCCC0201CCCCCCCCCCCC0201CCCCCCCC80
-:106A8000CCCC0201CCCCCCCCCCCC0201CCCCCCCC70
-:106A9000CCCC0201CCCCCCCCCCCC0201CCCCCCCC60
-:106AA000CCCC0201CCCCCCCC00000000FFFFFFFF1F
-:106AB000000E0000011600D6002625A0002625A005
-:106AC000002625A0002625A000720000012300F367
-:106AD000002625A0002625A0002625A0002625A00A
-:106AE0000000FFFF000000000000FFFF00000000AA
-:106AF0000000FFFF000000000000FFFF000000009A
-:106B00000000FFFF000000000000FFFF0000000089
-:106B10000000FFFF000000000000FFFF0000000079
-:106B20000000FFFF000000000000FFFF0000000069
-:106B30000000FFFF000000000000FFFF0000000059
-:106B40000000FFFF000000000000FFFF0000000049
-:106B50000000FFFF000000000000FFFF0000000039
-:106B60000000FFFF000000000000FFFF0000000029
-:106B70000000FFFF000000000000FFFF0000000019
-:106B80000000FFFF000000000000FFFF0000000009
-:106B90000000FFFF000000000000FFFF00000000F9
-:106BA0000000FFFF000000000000FFFF00000000E9
-:106BB0000000FFFF000000000000FFFF00000000D9
-:106BC0000000FFFF000000000000FFFF00000000C9
-:106BD0000000FFFF000000000000FFFF00000000B9
-:106BE0000000FFFF000000000000FFFF00000000A9
-:106BF0000000FFFF000000000000FFFF0000000099
-:106C00000000FFFF000000000000FFFF0000000088
-:106C10000000FFFF000000000000FFFF0000000078
-:106C20000000FFFF000000000000FFFF0000000068
-:106C30000000FFFF000000000000FFFF0000000058
-:106C40000000FFFF000000000000FFFF0000000048
-:106C50000000FFFF000000000000FFFF0000000038
-:106C60000000FFFF000000000000FFFF0000000028
-:106C70000000FFFF000000000000FFFF0000000018
-:106C80000000FFFF000000000000FFFF0000000008
-:106C90000000FFFF000000000000FFFF00000000F8
-:106CA0000000FFFF000000000000FFFF00000000E8
-:106CB0000000FFFF000000000000FFFF00000000D8
-:106CC0000000FFFF000000000000FFFF00000000C8
-:106CD0000000FFFF000000000000FFFF00000000B8
-:106CE000FFFFFFF3318FFFFF0C30C30CC30C30C329
-:106CF000CF3CF300F3CF3CF30000CF3CCDCDCDCD66
-:106D0000FFFFFFF130EFFFFF0C30C30CC30C30C3AB
-:106D1000CF3CF300F3CF3CF30001CF3CCDCDCDCD44
-:106D2000FFFFFFF6305FFFFF0C30C30CC30C30C316
-:106D3000CF3CF300F3CF3CF30002CF3CCDCDCDCD23
-:106D4000FFFFF4061CBFFFFF0C30C305C30C30C3AC
-:106D5000CF300014F3CF3CF30004CF3CCDCDCDCDEC
-:106D6000FFFFFFF2304FFFFF0C30C30CC30C30C3EA
-:106D7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDD
-:106D8000FFFFFFFA302FFFFF0C30C30CC30C30C3E2
-:106D9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB5
-:106DA000FFFFFFF731EFFFFF0C30C30CC30C30C304
-:106DB000CF3CF300F3CF3CF30020CF3CCDCDCDCD85
-:106DC000FFFFFFF5302FFFFF0C30C30CC30C30C3A7
-:106DD000CF3CF300F3CF3CF30040CF3CCDCDCDCD45
-:106DE000FFFFFFF3318FFFFF0C30C30CC30C30C328
-:106DF000CF3CF300F3CF3CF30000CF3CCDCDCDCD65
-:106E0000FFFFFFF1310FFFFF0C30C30CC30C30C389
-:106E1000CF3CF300F3CF3CF30001CF3CCDCDCDCD43
-:106E2000FFFFFFF6305FFFFF0C30C30CC30C30C315
-:106E3000CF3CF300F3CF3CF30002CF3CCDCDCDCD22
-:106E4000FFFFF4061CBFFFFF0C30C305C30C30C3AB
-:106E5000CF300014F3CF3CF30004CF3CCDCDCDCDEB
-:106E6000FFFFFFF2304FFFFF0C30C30CC30C30C3E9
-:106E7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDC
-:106E8000FFFFFFFA302FFFFF0C30C30CC30C30C3E1
-:106E9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB4
-:106EA000FFFFFFF730EFFFFF0C30C30CC30C30C304
-:106EB000CF3CF300F3CF3CF30020CF3CCDCDCDCD84
-:106EC000FFFFFFF5304FFFFF0C30C30CC30C30C386
-:106ED000CF3CF300F3CF3CF30040CF3CCDCDCDCD44
-:106EE000FFFFFFFF30CFFFFF0C30C30CC30C30C3DC
-:106EF000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD98
-:106F0000FFFFFFFF30CFFFFF0C30C30CC30C30C3BB
-:106F1000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD76
-:106F2000FFFFFFFF30CFFFFF0C30C30CC30C30C39B
-:106F3000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD55
-:106F4000FFFFFFFF30CFFFFF0C30C30CC30C30C37B
-:106F5000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD33
-:106F6000FFFFFFFF30CFFFFF0C30C30CC30C30C35B
-:106F7000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0F
-:106F8000FFFFFFFF30CFFFFF0C30C30CC30C30C33B
-:106F9000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE7
-:106FA000FFFFFFFF30CFFFFF0C30C30CC30C30C31B
-:106FB000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB7
-:106FC000FFFFFFFF30CFFFFF0C30C30CC30C30C3FB
-:106FD000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD77
-:106FE000FFFFFFF3320FFFFF0C30C30CC30C30C3A5
-:106FF000CF3CF300F3CF3CF30000CF3CCDCDCDCD63
-:10700000FFFFFFF1310FFFFF0C30C30CC30C30C387
-:10701000CF3CF300F3CF3CF30001CF3CCDCDCDCD41
-:10702000FFFFFFF6305FFFFF0C30C30CC30C30C313
-:10703000CF3CF300F3CF3CF30002CF3CCDCDCDCD20
-:10704000FFFFF4061CBFFFFF0C30C305C30C30C3A9
-:10705000CF300014F3CF3CF30004CF3CCDCDCDCDE9
-:10706000FFFFFFF2304FFFFF0C30C30CC30C30C3E7
-:10707000CF3CF300F3CF3CF30008CF3CCDCDCDCDDA
-:10708000FFFFFF8A042FFFFF0C30C30CC30C30C37B
-:10709000CF3CC000F3CF3CF30010CF3CCDCDCDCDE5
-:1070A000FFFFFF9705CFFFFF0C30C30CC30C30C3AD
-:1070B000CF3CC000F3CF3CF30020CF3CCDCDCDCDB5
-:1070C000FFFFFFF5310FFFFF0C30C30CC30C30C3C3
-:1070D000CF3CF300F3CF3CF30040CF3CCDCDCDCD42
-:1070E000FFFFFFF3320FFFFF0C30C30CC30C30C3A4
-:1070F000CF3CF300F3CF3CF30000CF3CCDCDCDCD62
-:10710000FFFFFFF1302FFFFF0C30C30CC30C30C367
-:10711000CF3CF300F3CF3CF30001CF3CCDCDCDCD40
-:10712000FFFFFFF6305FFFFF0C30C30CC30C30C312
-:10713000CF3CF300F3CF3CF30002CF3CCDCDCDCD1F
-:10714000FFFFFF061CBFFFFF0C30C30CC30C30C396
-:10715000CF3CC014F3CF3CF30004CF3CCDCDCDCD1C
-:10716000FFFFFFF2304FFFFF0C30C30CC30C30C3E6
-:10717000CF3CF300F3CF3CF30008CF3CCDCDCDCDD9
-:10718000FFFFFFFA302FFFFF0C30C30CC30C30C3DE
-:10719000CF3CF300F3CF3CF30010CF3CCDCDCDCDB1
-:1071A000FFFFFFF731CFFFFF0C30C30CC30C30C320
-:1071B000CF3CF300F3CF3CF30020CF3CCDCDCDCD81
-:1071C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F9
-:1071D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD75
-:1071E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D9
-:1071F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD95
-:10720000FFFFFFFF30CFFFFF0C30C30CC30C30C3B8
-:10721000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD73
-:10722000FFFFFFFF30CFFFFF0C30C30CC30C30C398
-:10723000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD52
-:10724000FFFFFFFF30CFFFFF0C30C30CC30C30C378
-:10725000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD30
-:10726000FFFFFFFF30CFFFFF0C30C30CC30C30C358
-:10727000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0C
-:10728000FFFFFFFF30CFFFFF0C30C30CC30C30C338
-:10729000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE4
-:1072A000FFFFFFFF30CFFFFF0C30C30CC30C30C318
-:1072B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB4
-:1072C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F8
-:1072D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD74
-:1072E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D8
-:1072F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD94
-:10730000FFFFFFFF30CFFFFF0C30C30CC30C30C3B7
-:10731000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD72
-:10732000FFFFFFFF30CFFFFF0C30C30CC30C30C397
-:10733000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD51
-:10734000FFFFFFFF30CFFFFF0C30C30CC30C30C377
-:10735000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2F
-:10736000FFFFFFFF30CFFFFF0C30C30CC30C30C357
-:10737000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0B
-:10738000FFFFFFFF30CFFFFF0C30C30CC30C30C337
-:10739000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE3
-:1073A000FFFFFFFF30CFFFFF0C30C30CC30C30C317
-:1073B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB3
-:1073C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F7
-:1073D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD73
-:1073E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D7
-:1073F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD93
-:10740000FFFFFFFF30CFFFFF0C30C30CC30C30C3B6
-:10741000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD71
-:10742000FFFFFFFF30CFFFFF0C30C30CC30C30C396
-:10743000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD50
-:10744000FFFFFFFF30CFFFFF0C30C30CC30C30C376
-:10745000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2E
-:10746000FFFFFFFF30CFFFFF0C30C30CC30C30C356
-:10747000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0A
-:10748000FFFFFFFF30CFFFFF0C30C30CC30C30C336
-:10749000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE2
-:1074A000FFFFFFFF30CFFFFF0C30C30CC30C30C316
-:1074B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB2
-:1074C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F6
-:1074D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD72
-:1074E000000C0000000700C000028130000B815832
-:1074F0000002021000010230000F024000010330C0
-:10750000000C0000000800C000028140000B8168F0
-:10751000000202200001024000070250000202C0E7
-:10752000001000000008010000028180000B81A80B
-:107530000002026000018280000E82980008038031
-:107540000010000000010100000281100009013854
-:10755000000201C8000101E8000E01F8000002D895
-:10756000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC5B
-:1075700000002000CCCCCCCCCCCCCCCCCCCCCCCC5B
-:10758000CCCCCCCC00002000CCCCCCCCCCCCCCCC4B
-:10759000CCCCCCCCCCCCCCCC040020000000000067
-:1075A0001F8B080000000000000BFB51CFC0F00350
-:1075B0008A37B231306CE344F0E98159181818F871
-:1075C00099C8D7BF0668C01620BE0CC47B5848D7E0
-:1075D0007F5E1AC15E20C9C0700488BBC51918EA55
-:1075E000A510E296320C0C3780FCC5503109A09EE4
-:1075F00069D2E4BB79140F1E9C648ACA773586D0A1
-:10760000374D2074329ABC1B545E500F42A79862CB
-:107610003757488F38FB1354D0EC57C1AF3E5D034A
-:10762000951F8EA6DE0FCA0700DCEC914ED8030032
-:1076300000000000000000001F8B08000000000098
-:10764000000BED7D0B7815D5B9E89AC79E3DFB99E7
-:1076500049086127049C8400C1F2D84280A0142705
-:107660001030B6D46E5E12BD081B1F95872411D34F
-:10767000635A39CD401E2401243E4AE92DD50DC55B
-:10768000367A6D1B6D6A698FF66C442D9EDBD303D1
-:10769000942AADE0096A2D58A0B1A71C68BFB6DCDA
-:1076A000F5AF47F6CC64761E3EFAF57CB7F193C988
-:1076B0009A59CFFFBDFEFF5F2B0A2A443957217428
-:1076C000057EAE47C8101042D3534F744F86887260
-:1076D00010FABC8AC8CF255F7832CA40A84EA5CF21
-:1076E000FBFDE17DF06CAB4728391EBE8F4EA0300C
-:1076F0004201848AE56C68E18F3E5100CF9A29B13E
-:1077000049E439139E594844683894F3B57703B473
-:10771000EF2B12FEE764BC0CC693E82B24A3D268BF
-:1077200092B47F00A119A979A09ACF6AB1506ADEFC
-:10773000CEA7A42928C9EA5E817FA41519F160FAB1
-:10774000FA752785EFBE64A93F1685B2C9BC6424CB
-:107750009379B1F60899C83A3F673F97EAD1775FC6
-:107760001ADB176EE9C6E5706BA957C9B3B95E435A
-:10777000492F42B899D139113F83C8D837B16FBB6F
-:10778000722430F8B1F9C0383AAE8FFF4718EE8D49
-:10779000D92811001CA2B80D6E8DC1C5AAE1D21F57
-:1077A0007FA26C0CB76236E7C2BEEBF5C1BC301CE1
-:1077B0007C302F17782E87794DEF3B2F5F91735ECA
-:1077C0006B90153E439D977F024247001FB2811088
-:1077D000C1CB7DB6FE44CD30BB5DFA438C2E649D9B
-:1077E000AD6F90780A148BA9F1010EBADF465FDE07
-:1077F00048969DDE9C740DF020F86A67F0894994E4
-:107800001FCC141EF13350AA0BA890148F00DE2257
-:107810000CEE913B9BEF15315F8551A2651CE6870D
-:1078200048F7EA85C067E193379E459331FCA25340
-:10783000D579784D5A89FED002FC0C4CD404A0D7DF
-:1078400036E0B36BA1BF5BCC325C6E80CEF270D100
-:10785000BCC93009DC0C1BDC30E47419973DF06BBB
-:10786000A10BFC502F1E842BDEBEEDD3C1CF832C89
-:10787000F823FCBCD1469769F11EA7ED4CFC1FE034
-:107880002BCBD18F566EE7F330B294F1F7A7E01708
-:1078900002EF7BFF26E365A27DAA5E82D75B2C6A9E
-:1078A00009A88FF44C1997031532023996998D0E59
-:1078B000628C0C889746842A80FF11EA448B26A5A7
-:1078C000E6F7AF8CBF723FF7E8EA66CC4F174B8301
-:1078D00051E0AF8886D0B0ACBEEBD9CEE44B6F3967
-:1078E000FA2C8A4F84F1122D85785E66548C3E0105
-:1078F000F3297E518B5BF8E574AF7C71D207D2E53A
-:10790000194C1E60F848C5A2E19BFCE1E943FA80EE
-:10791000F4118C2B36BE1C2ABE2E0C913E3EEC7808
-:107920001CAF7DF96A33C36BA30AF2AC455FDCAFD1
-:10793000BEEA8BD77D08EA078A91917069F75F5696
-:107940007DE17C5AE4BB538E4A236654EEED0F6F03
-:10795000D97678F07E7D7592FECE305C9435225FCC
-:1079600015A6075A230F9B08D3DD45903D181E52DC
-:10797000FB354928A32244E810FF24055CF6458C1A
-:10798000441BA18304C10B9F9F57176DF095B3ED66
-:107990007218559A8275FEBE3A85CC4381F1B2C108
-:1079A0002EC01D6250C84194F485A1069D3FA8A435
-:1079B0002B63A06CB7335AF4A9C80D0F32C3AB20A8
-:1079C000707A7D6070F2C539DE52FB7C07DD2E28AF
-:1079D000EBEFF2362E723AD54E46EF72FC6020CEB7
-:1079E000E1761DC3D3560F3A204CC1F220FF66B09A
-:1079F00014D056F8340BDB21F0CCC5E5FCA9442E9D
-:107A0000A00E4186799221311E11D677502F20E8A1
-:107A1000A41F51AD2172450A1AE4C9BFA79F171DC3
-:107A2000BFB7ACC6AB003F6B228ADE86E7B85E32DA
-:107A3000F4CD4017D3B07CD2E1FDB872D0731E8173
-:107A4000CEEB4B422E59879CD59243ECB234F6DDF7
-:107A50001A19F3E454F8BE7D5C7FFC84129E9E6E7E
-:107A60000B3C9DF6E0DD02B6073F817F99896602F7
-:107A70001C7F1F5D9C91EC075FEFD51FD6E4B129F9
-:107A80007BD0F97DBD846ADCE440B3A052BE544D86
-:107A900005EC03BEEEF5982FBC59C0E75BE87AB35E
-:107AA000B3097CD777BCAAC916FE5B8FD58C776AE1
-:107AB000DFF57078F37E7ADB270EDBDA3BDBF5F659
-:107AC000C7E505B68781CE391D0484F83601BFF7B6
-:107AD00046179B7930FED36514FF69E6DF8BAF0F45
-:107AE000387FDE6E20BAFAFDFE8666D04FEF2AEDB3
-:107AF000375D8BE9E837CF48D12DF8EB9A3DE3CBE2
-:107B0000C16E7A97D137C7D3D9FD0D396EF4910E76
-:107B10004FAF0A3E320EA7AF35E28A7EE96120FA06
-:107B2000FA9E93BE3A977C2CF475C4495F0C1EE70D
-:107B30003AE9FAD1EE61142F0C5F4EFCA4C5CB07D5
-:107B40006DD7979E7E2160BEF6762E71A727365F91
-:107B50008EAF0F3BDF81E82847370C0D8F3F02DBEC
-:107B60003102E88F12144DEA60D745A9DE8A52BD72
-:107B7000C5E5126F7F41A0769A8C8E93F6124A9AD1
-:107B80001AB1B7ED76C67C09BFC4FD3416A384973D
-:107B9000EC8B0C95E8A9621951FD67047371FD0C1B
-:107BA000C47EA4D951587706B3FFD16CA67F056C6B
-:107BB0006FE1F5054BECF687DF619F48B05F08BBCE
-:107BC000D85B43DC1FFB44B63F0EA020D1477C7F2F
-:107BD0009C863F7BF7C50CAEC315648878DDCA610F
-:107BE0004F628B00DA0D11FD8C4E0A09EA2F40C559
-:107BF00060376F14F2A2A00FF03EAF27037F7FF72C
-:107C00009B12D10F75919A554DB0EC9BEBC677E363
-:107C1000711FAE47D38A3CA9F11E96DB5580776B66
-:107C2000D146CDBAAEAF09F102D1A2777C11655A27
-:107C3000D134184E7EAB1BC343C48004FEF3071F30
-:107C40008DBCAC03FCE8FB5E3859CB52DF7236D8F2
-:107C50003C79A498043BAE3584A89D8F460A65986C
-:107C60000E5A3DFCFBEB65B0DF6DF5D1F29E2DB3F6
-:107C7000369B501ECEEA9B95F47B2E2DDF273E517E
-:107C800006DF139978CD5380AC13953117FEBE4FA4
-:107C9000A47E95067346EC2E323D6A7F5DC5F7D90A
-:107CA0004B6E8ABE0CBF14E923C07F220563C4BE9D
-:107CB0009198BD266B26D5E36AF4F0780CEF51C796
-:107CC000256462388C6A3F5AE6057A0F723B2D8A2A
-:107CD00096E2F675CC1FA022BA3F06BFCE1542C76A
-:107CE000FA08D8B720B0CF2CFB7689D963BD78725B
-:107CF000E0ED11B986E06D6B7EEDE1023CBEB9505E
-:107D00008C02D96CCD2FCC5C6DC1E3B7D4B9952270
-:107D1000D8318DD9C42EE1FB64601828E792290080
-:107D2000683BCBC078CCC7920F613A1D1DEB29038D
-:107D300014E895DA8B648F8BCAB577895D2509576E
-:107D40003E31783B0AD62D02BD62FA7DC2B2DE61B9
-:107D5000028AB9C9DD157216C1CBB00ABCDE7EFC41
-:107D6000049FC7FA84DA677135164A3F4EBA797EA6
-:107D700008786E01BE188912044E03C1351D3C9B64
-:107D800023CF661279FD11C3355D7B273C870994AB
-:107D90005F56C8A5845F06EBDF6981FD14DEAF3650
-:107DA000811F0E3F1B981FCED9DE27B7A3A80B7EDD
-:107DB0007DBADD3FA458E91EFF5F2BEA541F049DE6
-:107DC0007E228A67A75E58C0F4425304EB052A0F4F
-:107DD00017821E0830F8374511F9AE8450C2C4DF4F
-:107DE00003A00FB09D852652F9AFE2FF80DF465415
-:107DF000DAF58132487DF08E107B99F0174621CC60
-:107E00006FB7D07EE338A09F5C6A8F476E6F89584A
-:107E1000FD05B522D5775C9F3D56D43B6F023F2FC1
-:107E20009BC36358A4023D26F2176710BFDD9D0176
-:107E30009B7C8A7C6931D9FF5AE899EC73DB997F86
-:107E4000341DFE342511779387BA249279858D9E4F
-:107E500024F8FC0821E7309721236B0A7F64DB8735
-:107E600085A7F61C1E83D7FBF83522B11BE5D97216
-:107E7000D283E12B97BE5229E0E7E3B03680C72CCE
-:107E800044E834A82F382B813E96BBD122DC5FB06A
-:107E9000C2B92FB69425E8A76725D1DF563F753FB5
-:107EA000FBB8C13E1B30BCDEB2F03F42B10AD0B3DA
-:107EB0003296E36D88B84BF3605CD9D072805E6413
-:107EC000231A24CFEEB20A5A8EB5C177DFECE8D17F
-:107ED00072E0434D26F23EA152BCF17EE74805B662
-:107EE000FD5BA6E6F08FCA6625D0814F5710D0A75C
-:107EF0002FAE180917FCD48A329377763AE1F4D181
-:107F00008F9CFB5074714AE47E6A3BDE6DF451989D
-:107F1000C22B6F17ECE3A7B2E3D559FEA8F1E99B9A
-:107F20004DF189303E99BFA40DE01C344504761113
-:107F3000AF17900A6DF8095EC61B2B6CE7EC2E4359
-:107F4000956EFA292029A43EE6FB7289DAE502D86B
-:107F5000DBF3A53D06D079A208E306F7DFE2C126F0
-:107F6000112EB76C16395E89BCADDDD252B619D769
-:107F700069392988D214A09BE5049F3EE6F7B9E44D
-:107F8000312B0A71BBB65122DAA783FEE9DFBFD5D8
-:107F9000506FF76F815F01ECEFFC1A6D2A80395D3D
-:107FA000BB5D3562859BFFEB2E89FABF76D41C6BD7
-:107FB0002766E84BF67D876785011408FB8FBBA415
-:107FC000E9A976A112EAD74071BC1E5CDFC3D733A2
-:107FD0001CD3673FF18AFFCDF4092FE7B1788EB348
-:107FE000DE4F2446873A8597CAE8F05241FFF4CF26
-:107FF000E173B9456271901E1F227A7738F1DFE98B
-:108000006C5D9279A40CFA9151F766D887EC12D185
-:108010001AEA578E117D1366E33D5EFA7B1FD4BBCF
-:1080200041A6F27294D1D30A781EB54944E0C77EC6
-:108030004AD249D72356D41CF4E0F7AD9B5134887B
-:108040005F8D867E71BB57C62A44EEABD954EEAB2A
-:10805000B59804703D15EF6B745C6E3DD88A40AFE7
-:1080600087F1C6094C5EBD1489E0E7F6D4759B30F4
-:108070006EB8344AECD0436367907DD583D928EA43
-:10808000D5537281D3D1839B161B40072D781F06D1
-:10809000E596A22D2AF8B12F16CBA48CFE8CE1C355
-:1080A000FD85F81FDDA474D35A40E72B4FEC462220
-:1080B000E15B95E053D6E8FA5B43DF34617EE65A34
-:1080C00044EC23B06F497C468EAA20CFF377CF26AD
-:1080D000FC236BED02D0C346147FCA4A27523049B5
-:1080E000E6DFFA1789D9EF2F6D06FB7D247485CB67
-:1080F000AF4AE7370FC51EE171416E8FB4C99D8449
-:108100000F4DCC63A06FB87DE22BEA24F4F9DF8C2D
-:10811000BE07DBBFAFD8EE4775DA2B4E3BA556D472
-:108120006C76A9735D973CC91B617E6DB998BF0BD6
-:10813000FA8E775CA2FB923D91C5FF51A0A7FAE1B0
-:10814000DFB97DC4CBF9971502EFC1D7C7F20DF6A1
-:108150005E06E5A3D19C4FBFD03F9F723EBA84918B
-:108160007E04F0239B2AE123A398F011E70FA9DBFB
-:108170006C1983E94CAF13C1238DC04CCFC2E5AB62
-:10818000307D2785149D8E62E3CA1313EDE35DE80D
-:10819000ECB15AD120FEEF28EE067F0F9B4788995D
-:1081A000E92F4E70BABA0874C5E92C7FF702B2AE57
-:1081B0005781A0A7835E7597233F62760ED2F61B88
-:1081C000563FAD0F35BAC7CF6B1FEF377EAE167D6A
-:1081D000B8F87948B6FBB3066A3FD4B8B9747918D1
-:1081E000A18FDE32DB873AEBC565265F4FEEB3C168
-:1081F000A50F3CA4EDD1783F74A27E487F3FD159B2
-:10820000838083138E3364E667F998E0E88C6BBF54
-:10821000CCE4FC40F2C06F1849710CF8C510F5DBD6
-:108220000411F3DBD8E9FDF14D94DEFD21712F88B7
-:10823000A870ED11D36B990FA6F725F2F014BDE7E6
-:10824000152793801FA7FE49A7770692B72B55E302
-:1082500036D925CF84EFB3537904988B5DF208D2D9
-:10826000E2B5E6A3C923182CBC7BFD962C2FE0F6C3
-:108270005246B7D8707803C365ED610FB1EFB1FE18
-:1082800093ACF1B2B56C7F773BDB1FDE896261F89E
-:10829000781E8915C02FE7D1B1F0340BDDEF9415AE
-:1082A000CA2F2D9EB7C06FCAE3E077B5D3329FCFF8
-:1082B000DDBBEDE5CFA1C539E0AFFBDCA31EF020AF
-:1082C000A0B50EBF593D10049EFFDDA8A619F0D63B
-:1082D000E4A176E8ED1A92216EBDE1075F9FB11A25
-:1082E000EC13667FBC87E5B26EB19FD605130AE03A
-:1082F000F7EDAE69375F87A07DA2390FE2D7998885
-:10830000EC479D70BEA3C53EBF81E6EF9C2F425B4C
-:10831000FA9D87DC21B8C659F7CBF6386BBA7C29B1
-:108320009E27F5924CF16FCE45C47E32DF0C241AA5
-:10833000883EA1795203B57F15DA4FFFE0ED7F3615
-:10834000C0F81BD49E05C4CECA3663E0EFE1F1BE8F
-:108350002A54638CC4BFCACF2F3281E77AEB45061B
-:1083600059AFA8FF7AE9E67D56534D714A6AFE5F20
-:1083700013E2276597F5DF2FC5ABA07F2FE0418281
-:10838000A74CF04DFCBB18BFD572B045C8803CA6C9
-:108390002EB2CFF3E9B28D1EAAE117906BC554AE91
-:1083A000058AEDDF9D7EDFDFF5E23D49F88F84969B
-:1083B00075B01F824909FC32A5F2B9DEFA78BC2AF1
-:1083C0005817EC93508CC88D5A8DD6AF42FACED93F
-:1083D0002584FFC8BEBBB6750C8997D70ED7A3E01E
-:1083E000879551D4207D38E8AEFAB28012167D58B8
-:1083F0002DF728C067D5D82EB2BEDF18916CFE5776
-:10840000E7D383543D584CFDB9C43FA4E1B265DDC8
-:10841000BF6F17585E8A9EB1B41FBFDCC608F5F364
-:10842000DEDE3A3683FA03EDF2F702DB1FFDE4E904
-:108430006F28E0BF3FFFD4E99B00DEEBFF45422AF7
-:10844000E4653C1D4249628F2514B0C7D67549AE1C
-:10845000FE0392390371CDEF8608BED63DEB4D2C5D
-:10846000C4EDD73DF7F66484E777614BCF2B23C18A
-:108470006E7E4AA07E6BB37BF212FC7E9D8C56B959
-:10848000F9058A3DD44E3DF7C34025F0B7D0717051
-:1084900025E9B773B9C76BD95F5FE5F1F07AD42EE0
-:1084A0007F52488C15DCE647F33ACE3D29D0F91DC2
-:1084B000F0247C30BF8EBD4A1CCFA3BAE37D224F8F
-:1084C000E67DF7DB618043F501C9A607AA3BA4A4BA
-:1084D0007732799E8627C483841940278C5EBA360A
-:1084E00090385055E7B6F7C14F517DC02ED7305C5C
-:1084F000A24980EBEB52742194BFF7ADB08E41F5E9
-:10850000DE9127C20057DCEF6A2503F48D9DBEA1E2
-:10851000FFCB597DFB43A887C4E1AA3B5BE9785DAB
-:108520009FF90DE8956A87FC7C0F7EC9ED6BCFC47F
-:108530003C0EBBB0637071B8F5DFBEF89889C73DDB
-:10854000F7EC6F1F33F1FCEFF9EB7F3DF600F0E73E
-:108550008F7D1AC8FFEAA77E1146167A5CE7A1FC58
-:10856000786114327371BD0BBFF4264CFCEAC20B68
-:10857000BF19ADE3755F78E68F393AAE5FFBC2FC99
-:10858000110087DAEFCF1BD1DF7E1BE835E1B5CED6
-:108590002B41F0AA1F10A811F43C7B3AF073A8EB12
-:1085A000D06898E7F913DE28D83DD5F85DDD54C0D2
-:1085B000D706A28FA1BC09C3B9EAE9ADEF839CE855
-:1085C0000B6F73A4489CF0C991E08CAFEA7A7B01F1
-:1085D000C11BEA217AD459BFFA38C6E794F4F8BB34
-:1085E00088FEAC80BCAB7EBA958ED789F117EE8B36
-:1085F000BFF3F0CBACBEF86B71E0EF22BAE7F15CF1
-:108600004868EB1A668B7FF2672AEE17CB88F52352
-:108610002FB83C1808BE6B043AAF651E63B707F865
-:10862000EAD9402F7E17027EBF7D7134C2F471C635
-:10863000D3B312E466CF0B5E6D1F7EBFEE85D70904
-:108640009F5DF8FE51452779972828E4B0FC2FFA62
-:108650007304E47015DDCBA1EAFDA1A4379CC253DD
-:10866000556251851E26EF4F93F7094AFF558983BE
-:108670004B0517BC1DF314523B2A319CC065C3FE49
-:1086800037146A5FA6F02994023E4F2F80F7E9F075
-:10869000C9D7AFC1FA675AF0BA9FF2ADB37E15E6FB
-:1086A0004FD07B7DF09B105E87E785BD5E19F4DEC1
-:1086B00005B0BF827DF19E823FB57F86BA5FF9A982
-:1086C00093BF795C98C1213D7D98CC0EE87F7D43B6
-:1086D00085DF8F3CBA8D8E381CCFFDD95DFE9F6142
-:1086E00072A30A99157916FB44F560FB04F2C65093
-:1086F000CC1C59909AEF39D84760FA3BF79444E282
-:1087000030CD9D87881C77CA8BAA34FEBF3FF2F11B
-:108710000E1C9C0C72EDDC8B3F24F459F5F46905BA
-:10872000FC63AF747C4FE99E98E207D00F098B7E03
-:1087300038F79D8393A93C70DFFF2A0AEDBFFA79D1
-:108740007BFFD54FBF6FEB7FBDD9A9D0FC84FEC79F
-:10875000794F3696C37ADF3BE241204FDFEB945CE2
-:10876000FDADBF05FD68C9336B3EBAE00D88DF97EC
-:108770001CF3EBA047BBB618237680BD76CC8340B4
-:108780007E23D9F82DC497BB8EFA75C87BE83A765C
-:10879000B3A45BFC133F70C073E671735E08F737D8
-:1087A000B33B56025B28A7DC283D2942CCA277FECA
-:1087B000B5472B4680DC6F047B7E3C8C178D90F890
-:1087C00077784105CD0B14359FABFEA6FD79589CFB
-:1087D000DCA38948B7D223DF6F31BF4F73D0DDFFF1
-:1087E0005CA670FB108F6B9183D856AD74C35B8908
-:1087F00042F741E9BE970EF07DB6C2F200D27CEF9F
-:10880000E56F861F2524C6DCE63D99F5E3F4ABA6AB
-:1088100093071ED6CF144567FDD3F502BC1759F256
-:10882000DD47A2C466F07FA160D019678EA9D63853
-:1088300073E591831057CE5EF27C2EC03F8C1AB543
-:1088400077891D8FA257FAB1639D716567BE61BAC2
-:1088500038B31AAC3A91447DFBEB1B5737485CBDEB
-:1088600031BF5CB5C6D51BB53E71F50D0A1EB729E3
-:108870000D1E3EABCCBD17BE63B333EEF6BD49A1B2
-:10888000FEABEB51F7F756C33CA3342E3FDB01AFF1
-:108890004F3278FD780C5E38563D6548973D18BEDE
-:1088A000F3961A8D2002E7AFE8597F10F88CC7E5E0
-:1088B000CDF1E295C0E0E137D47C8795EAE20795F7
-:1088C00041E43B202DCB552FA4E66132BE89907D3B
-:1088D000128FBF1C3A75B70A724B46F18A024B3CA5
-:1088E0008CE4D1E3FE72923E64E0F92A9A4EECEDFC
-:1088F0009CE4DAAFDE05F1722D9FC41FA4CBD71123
-:10890000FFA1B35F291235499E57502F932CE334B2
-:1089100067D3788CACC55CF381572AF1A761BDD2CF
-:10892000E539A45F51A5F10C141C5C1EEC5796842C
-:10893000097C550C5F908F0464B02E960FF5D09291
-:1089400030D133BEC39EBDF0DD17A4F951F78BFEC5
-:1089500028E44F39F3A3CADEA4F196E6D30289A333
-:1089600070FA6D2EA8B90AE4783FF9512F2B16BF83
-:108970007ABAFC285FF04E921FE5FBC0F951917264
-:10898000B0C79A337919AB133C8F6696EFF42BE599
-:10899000F03CD04FCD2C3F0A99AFCE23F57919D5B5
-:1089A0001C32E03BCBA7CAD9DADC00F5B347A29A68
-:1089B0004EE2CF33D0328B9CF579699CF9CB8AF1AA
-:1089C0009F8A45EE71FCFB7AE96AAB0AFA1B3F49C4
-:1089D000BCB219D315D8ED39C95664D547FCC9E9DD
-:1089E000A8B9A8FF789D7CF91AE2C7E765554B182E
-:1089F000864B7D43A57A82D32FC4D3402FA97AFC1E
-:108A0000AB77013D6707A3014A97244ED61224EEA7
-:108A1000A93EEB6829BA9DC4BD2E6AD4DBCDE9B866
-:108A2000EFFCE7B0F9179A405F1783288A5CE45F90
-:108A30006A1D25641D2B1543F55AE0987D957BBE74
-:108A4000E9762F5D4F536C45EC2E98C91A7BDC9567
-:108A5000E75FF0FA01213E1CFAF564D3B8ABA852E7
-:108A60007E4BE10BAB0A8B7FB301AD308104E41583
-:108A70009DE4C8A2AC2548FD31BEF868AF2D3ED7B5
-:108A80004DE3B88E78E27CE91ECADF03E06F07DBB6
-:108A90009F6C83B8DB7888CF45D8B93D9DC5E90C7C
-:108AA0009A2F94869E5A8AFA8F43B5D74749FB9DE1
-:108AB000F5A5340F4940CCAFFDF506A013704B501F
-:108AC000BADFDF007C1092385F3C45CA0F0AB41C45
-:108AD000DFDA45F8E6D0A9D72BEFC0F4D16CF8095E
-:108AE000FF0FB43E2D3183E075A8E3F45D2F1DB771
-:108AF000C50892FDEE40EBD69274DCC18EC3E3E371
-:108B0000A9F5A9649C667D8071DAE93803CF9FF2EC
-:108B1000C98E836B2B20AEAC62FEF7E1F7EAEC1E48
-:108B2000E4161FCA60FC73E89497C8EB966C9AC76A
-:108B3000EB290E1AD40968EFDF3331672E39C7509D
-:108B40007235C98BDF71B095C81905C6C1553CD1C6
-:108B5000E06ADA2E6EC0F9D970398A825FDF539CE1
-:108B60007307BCAF43EDB1B9A0874BE9B92D4F7185
-:108B7000F15DD04F26F0259EC73495E67D788AAF0B
-:108B8000BD1BEA1F9CFE5ABC01E0544AE9001DCE01
-:108B9000B5C1B1592FE4E771FAE57B4FA93D6E816C
-:108BA00054BF2D6F09C94B49BC1CCB856D5E8BFF33
-:108BB0001BEBC59D50F6A01213ECBD5DB7DC1CB5D8
-:108BC000F2F39795D8C3548EF03C2CCEE7EEF970B3
-:108BD000CDD93CAF2CAE4A2570FEA8374F7A61AE96
-:108BE00035AF8BE54907799E7494C6E1DAF17F6E63
-:108BF0007971CEF3891F559EF477BC6C3F1C40A35E
-:108C0000204FFA471E144DE279B7FD428A421E8C6E
-:108C1000933E9CFD39F3FB7BED9134FCFC6B008EA5
-:108C200045EEE5C61D78BBD347E2737CBC97403E5A
-:108C30004D1C984F47AEB1F733AAC67EEEEAAA3A6A
-:108C40007BBCAAC0CCB3D51FD35268FB3EB6FD6A2D
-:108C5000DBF7F1BBA7DACA1312D7DAEA7FA263AE59
-:108C6000AD3CA9F353B6FA530E2CB695AF49DE6A64
-:108C7000AB3FEDF0EDB6EFD38FACB37D9F7962A340
-:108C8000AD3CABFB8BB6FA75D83C51483E1C8D37DA
-:108C9000A1ED23452B7DB66662BD9281E1988909DD
-:108CA0008626EB937833CD314EE51938DB49458A7A
-:108CB000A161FE95F471E51AC91FBC93F09154941B
-:108CC000335727EF672C00BF132AA1E7AF7CAC3FD7
-:108CD0004F114AC2B94B39E8C0AF232EED91B6937C
-:108CE00078AA72F286C342B82F5E3D11679EE2E019
-:108CF000E2DAB2EE683744BEC854595C7B14E60B26
-:108D0000E247FCB344CE3D9787887D60D9DF1038B9
-:108D1000F2FDCD1C1535024C395F94ADE81949F2CE
-:108D2000D97BF7355E7128F9C67DF58A97D85D5CE9
-:108D3000CE0CA457A4C4345B1E82F389E5DF14155E
-:108D4000F6E1E15B893CEADD17F4CAC7D854F8EED6
-:108D500091A3443EF6CABF8E3C9B5C18AC7DE69462
-:108D6000D36D20F4C9791F77791D863C302C971E6E
-:108D70005C72138983A15A643BE79753195341EFFF
-:108D800061BBAC42B5EC9FC3A5D43EFB7BB353BDE6
-:108D90006CBDBD74CAEC550ED76105353112D70BC9
-:108DA0008908F6550DB3A311F003B64015CB3E6DFF
-:108DB000973A86C8D1C6A02282BFB4F1F07C121FB8
-:108DC000F0FA622AE4D135786215B0AE864C517360
-:108DD000CB77DAA252FF8C521798B6BF1FFA501405
-:108DE000BCEF7759EF3E95FA5D1AB5C58741CF655F
-:108DF00085141D526E9B0FCE5A04E3CA0B650DF607
-:108E0000B5086FE2DEB6C41521DF1711F88B442FC9
-:108E10002A756132FE40F3BD47A57E066F9DAFDF28
-:108E2000F97A15773F45BAF96E85F9660F3C5F6FA1
-:108E300036CD5FF5D605C9F8FF0C1759B8C0DF83EA
-:108E40008C96725CAFE9F40DED458462689EDE237A
-:108E50000BA7123AC582DA46BF7C1F81E937A10E03
-:108E60004FEDDFF939D5BB559A97C0F18A74EA8F77
-:108E7000181697C9BE372B4EF7BF29F941E928CB01
-:108E80001345E45C57BE4CE292E0A6B1FA31FECA4B
-:108E9000F671DE4F4609BE5A3F23A32D406F457839
-:108EA0003D70DEF6308D3BB57AA295B1606A3CDE4E
-:108EB000FE4D860F192DCD20F95BD2C2889BFDD9BE
-:108EC0004BE70C6E4E39FB632E6773512E95B3132F
-:108ED00097C311A174FD38ED0D7EBE67E8E74EDA49
-:108EE000093C5BF31F257634F78FA148C900FE1EAD
-:108EF0001A2F4DE179B99EC478946F9C4A9C7EAD3F
-:108F0000450CCF358EFC5D86678E5FEEB747916C62
-:108F1000C2D71CDF12C0137025CD8EF4A7AF24C6B4
-:108F2000374E789EF91F0ACF9FC31AF0336B145E39
-:108F30003FF0CDA11B11898339F891B7E374EF5C41
-:108F4000BFEAFB9FBD7E4E0FE9EB9BAEFB0F1ED72A
-:108F50000D317A5399DE7CB9F4AD1638272267D3E8
-:108F6000FD6EA8B491DCD322235303FF5A889FCB14
-:108F700061E732793E957FA27DFFC1F30B4919F37A
-:108F8000BB87ED3FFADC9BC2EC2C7E4EDF397F279E
-:108F9000BEE6F8DCF30751BEBBDFD5198FE3F10D58
-:108FA0009E07CBE300040E78FD9E59628CC8BF1269
-:108FB00064EC75914FCB7C542F74BDE8237912A1DA
-:108FC0004A85F863F34A926550CEAB4151D013D72E
-:108FD0009E3982E2B8D3B17E2AF7F34A1202F83DF5
-:108FE000F2CED1BCD85D2C5E99579B10565BC679EA
-:108FF000C047E5ECA553F713F9F8E2289A877E5F9E
-:1090000019B5DF8E446E6F2F83714B693E7908EF7F
-:1090100017216F2C74C24BF26F514937023F2AD689
-:109020000266087F3F538FA6DE3916F2BE54F23C2B
-:1090300057AF91E7A151CAC1EB71BD8D057E1DFAF5
-:109040006D2AF4D373BB2195ECF7FF3BF373C4AFE8
-:109050007AA13E42EAB77CC9207645E3C1B3C46F2A
-:109060001830A645A91FD5905029CCE788017E0E5F
-:109070002447F5C5F0FDD02F493D4989FFD204FBB7
-:10908000E45685ECEF010E104F68F0D17CB9ADBE0F
-:109090009A48263C0BD0AA452EF0BED5C7E34CAA71
-:1090A000A4E4A4F29094D2A49401FEE412D439165C
-:1090B000E46553A20CF4345AABE9304EBE9A28034F
-:1090C000FF71FE1A2D0A3E74A594DE23C2F1E1F170
-:1090D000A1D83341A89714EEC5E316FAA9DECC3B1C
-:1090E0009120F70C5D3A35D3D5FEBFFF6419F9BE68
-:1090F000BDBEE258B9859F8369E2950F14CD7DD43A
-:1091000087FBFD196C7486A7EF973F07DBEFCF7CD9
-:10911000549F1E3A357E04D8977569F2A8250DE351
-:109120006918954FE08FD838561F9119B4F643E16E
-:1091300021BDF8438AD789943E1BBE3F3E03FA7D8A
-:10914000E9D4720DFC7DBFCF2E22FB86F3CF790DC3
-:10915000B05FCE67A13524DFF2B999AFC0FEF0B79A
-:10916000F587B3648B5C3CFF9DA3333CB8BFF3CF62
-:109170001E9D2113E64AD8F6F11BAEFC7C06D809E9
-:10918000E65C545C839FD59A82A0DF6A95AE83E744
-:10919000C9EDCA519AE1393F9049DAE78C101F8432
-:1091A000B2A4FE7CF43BD3C8BA695C81C571F0FA05
-:1091B0001A8284AE35BC018178A1E91D0DF1AC5352
-:1091C0005E427F970A5071C114F00B4AA45DCF5ADA
-:1091D00094807C0A255903EC897C3F4D20E09BC09C
-:1091E00071ED20A13576CF5BABAF90D121CD23DCE3
-:1091F0007CEAFEF1001F2ED7E57988C4337A6E51E0
-:1092000013608F3E2CEB5F590176E06D3299072E8B
-:10921000FB34173C2E0F14DAE092C5E2131CAFE9C1
-:10922000E8645B3D8A166178FFB85E8DC2F8CFD7DF
-:109230006BA4FCA3FA08291FA8D7C9F3B9FA62F2F4
-:10924000ECAA8F92EF1DF5A5E4C9F3FAC8D65E2209
-:10925000F674AC0CF4D032EA87D374D1807C850CE0
-:1092600019A9C3B0A9A29DFC4925ECB741AE64641D
-:1092700011BE17A07D36CBF31B9E3BB7B54C4FC933
-:10928000572E4F1B3C48007964CEA27E8610F4878F
-:10929000DB672F45E82D8B5CBF82FF79AB98AD0F64
-:1092A000CF27C3B07F77D60FCB7801597DDB61B96B
-:1092B00048CAA97EDDE137D427F8CBDFB2D0F7AEBC
-:1092C000E978D5988E7609548E3DC8BEEF983E2336
-:1092D000E37628CF9A9141F27F67215DC370DCA9C4
-:1092E0008BA62723557F4FFDE19CF2B14C07819C53
-:1092F000AAD5F6B659F631F9265A15B3D0CBCE1AFF
-:10930000B9621FB133E2B98B27917C63E6D7DE5790
-:109310006ECC26FD927241DBA17293E915903373F6
-:109320002E533DD4AB7FFE4CDF73BDA730FC6F9F47
-:10933000BD450A039F803C057959124773F13C8370
-:109340009FA4F1EF59EF2411E4F72951FC1EEC51D1
-:1093500085E69BE4451202949FF4C5A6FA613F920C
-:10936000B53BB90FE3FB0F5D5E1DE28D5D2FFE91F6
-:10937000E46748931515F83BEFF9D3246F4912BB06
-:1093800015D8F12E6BBB7ABE0CF62C4C84DC2B80EE
-:109390001535C6B394C3D667763695031CC5F85900
-:1093A0006BFD5DFEF8BD74C78C0C3582F9C1C7DA60
-:1093B0009BE39B8C7C5CF6D0F2B2B6714DE66C28D8
-:1093C000E3FA99B4DC88ED846D999D111197839B24
-:1093D0008B9A0E8F8232AF5FD464E2F631A60F50C3
-:1093E000305E00FCDE5BD670396429CBB48C54FA55
-:1093F000E4EBDD70E88FAF8CC470A87A5EE82421BE
-:10940000BEE7F70AB0EEBC037BE9B9800422FBFE9D
-:10941000BC849080A39B1DF587B546EE5CE378C1C4
-:10942000A2614284DE1BA4243C51D85E4E60F782C8
-:1094300070BA782640F5C084046E6F8D4B3BEE0900
-:1094400099C0EEA1212403F2723B3DE7EBA4F3F1B6
-:10945000ACBF3A64B649A0B79FF668243ECEFCEC98
-:10946000E7B8DDC4FC39F730079E678BE9BF1AE423
-:10947000DF6A99F881D7172436631B0AADFF614173
-:10948000145BACA8C947E9657D6667CE544C2F4D87
-:1094900099F67203CB9F8F649A995913217FE8A1A3
-:1094A000D190DF5385DA577E11E6FB531A0F3F7BCD
-:1094B0007056C675B8BCE1A7348EB1A1EBA802F412
-:1094C000BDC3CFF28EBAAEF914ACAF6ABB48CEC5FD
-:1094D000015F1AE3F1748DF6AB654C2FFF1A383932
-:1094E000DF87F1FD64A1A189D720F4C6B6779BD4AC
-:1094F0004FE2B2A24D00FA7863DBF926A0AFF5B3D4
-:10950000F87D76E75F368A58FE2306DE8EB6D94DA3
-:10951000700E63FFAD159F02732B47A4FC8B09925D
-:10952000C4B5A5CC46727EEF774D22B19FC145BA36
-:1095300009C3BD48468765FCDCA5607C029F35CB2E
-:10954000441EE2F72D1E829776727F086AA1F751BA
-:109550008C7DDEBB1AECECA21A632DB1B7B589C4C1
-:109560000F301AF5FE903C89AB1095BFE3355426B9
-:10957000E37A2501EA2F2FAABC793DB493424BFD33
-:10958000C0EF3952C224FD7F8DCAE15D62A253054E
-:10959000B91C2E24F8DD15A674613E3C91D0C57E21
-:1095A00071EED560173509ABDB5E05BC66169273AC
-:1095B000AEF07E23AC9FE1B3418BAA80BFFD0C9F30
-:1095C000D25ED1847C4DFE7E9B70FB5A80EB3BFECD
-:1095D0008DF3550CD71CAFD1320CE3E16DFFC6A65D
-:1095E000C82C828742157F7FBBEDDE2615E365FF21
-:1095F00066234FB394C7FF054B752207EE257CDD2C
-:10960000187C741D2821FCFD65F07F3C99C5F99EEE
-:109610007E2F2AEC952306D8A50D664AAEA8582FB2
-:109620001459EA9763B9F0CDC72482D7C3783C9028
-:1096300013781D26D07DCF0499D8057E3C173F2E88
-:10964000FB2715927C5BBC6EE407BB61924CF43C3B
-:109650008FE32813446237437DA0077F6E21C99FA3
-:10966000C3F23A06E77CA4088DEB48D21E03F33020
-:109670000AB0FC7D415B44EE17F1155BF20A40FE37
-:109680003AF210244779ACB73B17CE2B659F5C2488
-:109690008CC67839ED6771996CBC8FC5EF7FEDA7EB
-:1096A000E71BEF8F993740BE0CD2BB73693C2A365B
-:1096B000159E236E2B1AD19FFFA5EF7E354AEC979E
-:1096C00047F265D77CB0E702745FE41D5544EECBEA
-:1096D000A84398FF812FF8FD2A4C7E7898BDE03C86
-:1096E00027C0E5892793AEB1B675DE88AC60EA1C69
-:1096F0009C143454900707B5A919608FEA01CAEF8A
-:109700008DC9599F05BB4566F2608F8F9E8FEDC94D
-:10971000449DFB10D8BF5164CD4BE0F2607BBD4A45
-:109720009E4FCC1947E2974FCCC9990BF18A43D78A
-:10973000BE47F6BF17F750FEBD78E465B823095D54
-:1097400034E9F95C202BE2974F3E42EE01F9861C8A
-:10975000DB49F2E5215F074F6967A63D0FF38900FA
-:10976000F59BFE89C927ACB7C9777E3F877CF91383
-:10977000C40FBC95C95D355E4EF695E0C6D3812E0B
-:10978000503BB96789C3C1792F877C793269FF273C
-:109790003F853FCF5F72E629F1F9FC80CDA7EF7DD1
-:1097A000AE767C70BF06C7036F5F2B1823B47EE8CC
-:1097B000A6FAB2841296BC90D4B90D85BCBF00E75E
-:1097C0005D32E05E9578FB7505C007096227FA8275
-:1097D0008DB6FB595144EEB19E2F0938CEBB38F9F6
-:1097E00005EE05063DADE8FD9F6BF935DEE6F2BC02
-:1097F0005C92A72EA3AF825D7B3EF0E60CF0C755CE
-:10980000633101AE72249BE43CE905B62F919FBF02
-:10981000979CE7E1F3E3FE385EAE3AB088F8E9AA38
-:10982000F707C9799EAA0495831B54F3B057B4E691
-:10983000DD1A49C8B7F51CA0FDE980038C8F3F688D
-:109840006B7261FD81BA3133E19C498E5873D568E2
-:10985000808F4CF100FBE56783E49CAE0C7A9C8F13
-:10986000FB4BB60F5CC6EC9100324580A7E48F76C7
-:10987000237A66D190B17D24F5CABDAB9B801F765B
-:1098800039ECAD5D7E5ADEBCEDEAA646AA9F895C46
-:109890005CD6F62FC41E6AF2F1F273444EEE52DA31
-:1098A000932027CDE7BC3AE83DDC9E9C63376F2DC3
-:1098B00026FA432A447900B77270B480FC7BCEBB91
-:1098C0000FFC0C4FFAE231BF65BF733E746234EC9B
-:1098D0002B5DFA336DFD8D1E5A7F78FC2EC003FF81
-:1098E0005E1EDE4DFAC7ED88BF03E51F7913DBBAB4
-:1098F00028E7392F3967B8C763B7B7F97337933398
-:109900002D8E7B39D478A3019B73CE9FCEFB9339E8
-:10991000BFCA9727D8F2A474A69F65D9005725FE21
-:109920003E917CFF939FD2410BCBC7493F4E569A45
-:1099300071EC71BBBEE3CC60720231FE97B5DEFB09
-:1099400036FBC97F75C6179DF28D3FB97CCB0E5093
-:10995000FE8A09F1AE001E675DA273819FF2E76483
-:10996000E0CF3B995E2AEE78E84550EBDF528DF769
-:10997000013F2B55636C60F8D0F9E70D369E8BFCE8
-:10998000A276D91A6AE7D6B64EFB14946B77146A9E
-:10999000A64BBC883FD75C0ED8E4D70EBFCEEE45B1
-:1099A00034891C5B73394CBE7F74E3F96CE7D9FAD8
-:1099B0008E1724DFF978F738E4F3A16BFF6D572990
-:1099C000A6E3DA673CA2D7324EED33EC1C900FCB06
-:1099D0006B3BBF1BC0EF7201EACD5304F9B053617A
-:1099E000651335835DF4A4553E9482DD966A0FF7C6
-:1099F00011EEF4F3F6BEE6F27C97FA0147FD42DE83
-:109A00007F26E9DF391F2E7FA00C769AFC172F9F47
-:109A10001F915F0F898EFEB2F8F879A43F6EAF7F79
-:109A2000A1ADF01553063A4D948DA4FE1D1DEC809A
-:109A30006FC851BFF59EAB2FF8A9DC5C73798C0D14
-:109A4000DF29B88FB3BDFF4D7DC496AF7F77BC963D
-:109A50009CD3F802F327AEC1163D69B767A42D4F1A
-:109A6000FF1FF3F8A0F3B82ECD3CE6FC8DE7516064
-:109A7000E3CFD43C8A6CEF3FE83C7EE0A3F2F805EC
-:109A8000F69CAFD17B01E6EB02F15BCFC7757D9809
-:109A9000D66FC04F153FE7CBC80C92FB6B13B43E9B
-:109AA0002E833FE0B37FB9EF9DEBC97DCF06C9C7D9
-:109AB000E1F74EF1FB1007BA9FC8F9771B9CDF0353
-:109AC00069EE5FFD6290C2E9A129372192BF1E8C29
-:109AD0009338C1C1DC0511B0D3BF32A58A3C1B73DA
-:109AE0006744401E35843E67CB37C77B04D773B0CD
-:109AF000EFB17ED1E51B44EB7994AD701EC5A53E58
-:109B00008F8B6D55F9FD801FCF7A777F4CEB2D0D34
-:109B100051FDB9558D93B86073E4E399FFB3413AB1
-:109B2000CE4353E6203ADF39491AF75174EB796096
-:109B3000FE3C189A11817536642E88003D3766CE3A
-:109B4000B0AD474AB39E957C3DDAC7BB9E7FEFC55B
-:109B5000C7075DCF02D73C5839DBFDDEF9C6101DC3
-:109B60006F6B244EE8ECE35AD7990F8DA7A1AD2B6C
-:109B70008BADEB8E20DD476CD5291F05A4D87F1453
-:109B80000803F3E1407F4F0415E9E260F2F07EC57F
-:109B9000E0958E7F6FF52486C3BC4ED4D3FDF36B66
-:109BA000EC3EA95FAD690811BFB6639CADF9FB42FD
-:109BB000FDF939FED71AFBF9F481E48619A471A0E6
-:109BC0005BE2F676CB2B03AEF79B60F8ED2C2848D2
-:109BD000C1B30FFE3F62B8A5A3C7A1C2AD393234ED
-:109BE000B80DC40777C0253783801BA7B774FDFC69
-:109BF000FF4267BB83D46E1804BC087DFDADE0F561
-:109C0000F74A5FCF0E9EBEFE012FA23707475F5C6B
-:109C10008E7528F49E45673FEF84E83D9BE3859A67
-:109C20006337427CE13312F1F71EDB53BE0189D664
-:109C30007A54BF1CAB98B781E4BBC60208EECF3A9A
-:109C40002E46FFBD04E20E8B693B67FFC7187C5EA2
-:109C50000E65B27DBE3E1CFC08C7634BFA5D1FAAB1
-:109C6000B0AC8BE4655AEEA392FAC2F718D277949F
-:109C700080BF69A1FB3C383ED38D3B547C1E8F7D59
-:109C80006348F81C68BD5DA1C1EAA504C14336EA7A
-:109C9000FD3B1857033C3B449ACF710A5ECD82FBD3
-:109CA000C910A9B4BC7204B9E76C4A98E53D29FA19
-:109CB00006F09379972CDC16C2783BBE2C53B0DEAD
-:109CC0007F2686A9DD326385BB5D9811A674906AF4
-:109CD0002FA0F17ADF7A7F65F6E3B215F45E2A24CD
-:109CE0001BA3165BCED54D08DBBF3BDB47C2613201
-:109CF000CE71C1FD7E583F9BC7F2A5FDB747B5C3E6
-:109D0000D8E16D6D92DBFD829C3FFE4F283E2C8C8E
-:109D1000EBBF26C4BFFE79A0A309411AF7905101F9
-:109D2000C4EB793FD9324A2A18EEEF78B449E0A75C
-:109D300075E927BFBF7ED2C195AF878F03AC08F707
-:109D4000B2E0FD23D92F961808CD867DA2377A2F51
-:109D50003D6C48E9208BE5CFCCAC092436839D27A8
-:109D6000E3755AE6DBF5A7799F86EF5DC7446D4B37
-:109D7000415F380C241FCAC234DE902DC5B7F8C02D
-:109D80003FB64A70BDDFECDA30FDFB23E742BD7120
-:109D9000F55130CEB847E31EB8E7E06696DF845051
-:109DA0007CD422CBF8E7189D38DB654B341E8D5EE2
-:109DB000A7FCDCB16FDD2837FEF939E3D373A1626C
-:109DC0005B1ECED2D8BD1EE0CFA50B1779F4207C48
-:109DD000D729BDB1797428F151D70453704A2B8724
-:109DE000187CBA4EC41BE07E8755750289234DDC72
-:109DF00044E96ED5A683E206FCDCCBF86F91806C5B
-:109E00007990F730BC76ECF38F86F977703F1D744C
-:109E10008CE7B17237227EAF3B1FFCF456B84BB5CE
-:109E20005B40CC4F76A002F20DBA599E8889BF6F75
-:109E300006F8950F27F31DB7E9FD5A90CF5D0A226A
-:109E4000E7E5FEB3D54BFE6E05A7975E39B1E95243
-:109E50003D24DD3DA2242701DD0C6FA8F9BC9B9FAA
-:109E6000FC0136CF3F0463196E762E7F7279CEEBFC
-:109E70002D96758F5BFD25157639C6E73DCC9B3C4D
-:109E8000EF765F432F1D26FAD77BBF60729CE3BD40
-:109E900017DF27DCF7455F6172AF2331773DD15B78
-:109EA000A6570779C8E7C3E1956D5238DDBC54B2B7
-:109EB000C9DB550B038EF34814AE9FF5EA8FC13A08
-:109EC0001ED9F76F93000F4EFDE097E20A7CBF1B8F
-:109ED000253D2027CE483A79BE566FBF47FA351444
-:109EE000DF311DF4679DE4CA57CF32BCBC5679C739
-:109EF0003232FF464983F99F5E31ECA652902F958E
-:109F00009E28E44F9E6EBC2F749765FD5CDF39E799
-:109F1000F5AB3577F4ABB79657DAF1D6A150BBC0A5
-:109F2000FC14E5C3B558DECC26F4D5BD63261EFF70
-:109F30005822EB9A365A1DC1DF695CC27E3F23C6A8
-:109F40001F9C89E5CD5991FAC3CC7FA27263E9A326
-:109F5000B12688F39EAD9BF64237AEF713A607DE17
-:109F6000ACEB5F3F3AE969DCA3F6FB29679C400A4A
-:109F7000B48FD7BAEB835B32034CBE4447837CB9C2
-:109F80006D937BBD7F86E44A0CEFB37F95D6B8E531
-:109F90006D5ED6E87C57C5DCDB5FD642F43BE82536
-:109FA00017387F2F2340E5BCAC8D0639BD2ACD7C08
-:109FB000BF9B1126FDBCDD74FF6D10EF3B23DAE57E
-:109FC000F3DE0C4A17F519543E9FDD77AB6738E096
-:109FD000A959D0801EDECA8C4E007A5BDD789AF8D3
-:109FE00011FE89D5AF0CC67E171E0EFCB278FE702E
-:109FF0008C97AE15282AE8E9E5FF25C63FD912BDA2
-:10A00000C700EBBF7740FFE1A6EF10FB433646DF0A
-:10A0100032895ED90879856745731DC943D9E7A799
-:10A020007947283ADD7ABF8C2783C2EFECFEA1E1A5
-:10A030007B592CD0AF1D7F0CB5579171F707348831
-:10A040003F1EAB9092D7E349BEBB3FB0572AE8CB47
-:10A0500017E9C61FAA1D7876FFD0ECC081D6FD890E
-:10A060008C8241D9F5172B1E79B004F848699FEC12
-:10A07000267FB99C3ECEFC564EFAE1CF998C2ECE6F
-:10A0800024FA9FD7DDBBEDF3B9ADC63E1FCE2F67D7
-:10A09000120D7EC80FC7A34FB2DAA5A87CFA00E75D
-:10A0A0001CA8FF37DD3C3F9D6197134079104F5B43
-:10A0B000CBE4CD9B758F84AD7870AEFFACC8F6074E
-:10A0C0008FD1BCADB1B1D57387EB29FAAC6470F810
-:10A0D000A8E992EB19673F7FEF74C8F5DC4074C8BC
-:10A0E000E582B3FD3988F3E3A5AF963505E232E7A3
-:10A0F000C23A2D236D011C9141A5ECDC32D247C33D
-:10A10000B99BB3FBFC08FECEA6D9E64D8CC52C70DE
-:10A1100066DF7513ACEBF90AC3CFAAA59970AD0D34
-:10A12000A693E88D23487E8144EEEB7AED44D60277
-:10A13000283F724404098D6EAB5D2DC1FA1ECDA07F
-:10A14000FBCE559B8E127B70A874BEAAC6AEFF2FA5
-:10A15000B375F4DA59724F09D04F3A383466503833
-:10A160002C8B2D9A0FF2F98E4D0291B74D193AF5BD
-:10A17000D7CA0691DBA891EA47A462786015721AE3
-:10A180001601F0F832FBFB63724CB19E4FBA6BFBC9
-:10A19000FDF3C13E74F24B0ED34F481399BC8F7F31
-:10A1A0003B637A4A3EBF25D41C1C81AB5C9BA1F16A
-:10A1B000FB61099FF2F55C9B41D787EDB46F93BFBC
-:10A1C000BBC4D687A20E7A13DBAB7E04F09FAB1222
-:10A1D000BBC0EFC5721FF2E6BEE1D768DE1CE52BFF
-:10A1E0006EEF38DBDF2CC76D76E3FF05B9373CBD7A
-:10A1F0001DF20F7DE15EFF7D06B7BF95BEF8CB4730
-:10A20000A42F8E86759B9DC5F5C6FF03C8D629333E
-:10A2100000800000000000001F8B0800000000000C
-:10A22000000BDD7D0D7854D5B5E83E73664E669221
-:10A23000996492CCE41F9C49000324780221444095
-:10A2400098240482609D408060030E081A2584A82B
-:10A250005879AFDCE684440C14BDF1E7AAB55EEF93
-:10A2600010D0F25ABC0D965A54DA8E54507BF53603
-:10A27000F88BFDA2466B292085E8AB57DB8F5BDEB0
-:10A280005AFB2773CEC94C08DAF6F2BDF0F19DEC0B
-:10A29000B3F7D93FEB7FADBDF6CE098B3A3FD34341
-:10A2A00088B655264F10423E3CF65935961FE8B504
-:10A2B000B82528AFD8B84A0E390949C692979013E5
-:10A2C000E1C529583E8F3FB3873E6F7A44269142BD
-:10A2D000427FCEC3FFEB5B920CE513DD890182E385
-:10A2E000CD7285C7FA09D9AF108D9412F2C1B6CCE0
-:10A2F000F0162857DB89E69C4CC8F4141F1DCFB319
-:10A30000F98B56F724984FF77F14937C98DF3D77AD
-:10A31000AE08150D1DF72F6E0B215361009FCF4224
-:10A320003208B9C3CEC65C9D4C02D83F81F19ED0A5
-:10A33000F52FBE7BBB9590C8E5503F06BE2B8B7EAC
-:10A3400067EE7FE975578EC675BF7DDD8CD1AB8A10
-:10A35000A2DFC583C35229F42F4B70DC365945B8B0
-:10A36000EEB937A1B13B06DCBE8D709D3A747CFC22
-:10A37000B1C23A16F3DF976CAEB8CB0520D9923450
-:10A38000EBAA508CF1DF26A17BA6C278DA66369E56
-:10A39000799C6BF8386FD7DFB004E1FFB926BB6555
-:10A3A00080477F839C5C8EDFD5DBD4B1D07FBF76C6
-:10A3B000BB6BAD6E9EBF8D039FDF36DEE08A8507E7
-:10A3C000F15C566FA4830FC8C06BD3709CDDB1E7FE
-:10A3D000B75ED09712BAF74A98DFC9AB655583F9D3
-:10A3E0009CB4C077482F8FC277BEA1DFADE2DF7D7E
-:10A3F000B07978BA5C5C639CCF92638946BAB490BA
-:10A40000C69E18EB59FF15E97E05D2BD3D5ADEA365
-:10A410000C8C72C3F71FEC3CF7DE9DB89E9D89142F
-:10A42000DEE67E9253653ADE49E41384D7F604CE25
-:10A43000275DCDCFC1771F5C93A36E2143F9839035
-:10A44000AE6F4C87FABE6E4BC976A8DAD39DD4188E
-:10A450008E31DFF1A98C0E3CB2963801DA93771871
-:10A460003E90DC906F96707A7377FFB08558A2DFCC
-:10A47000BD83749040C81BAD76FADCE1B6D3F1EB36
-:10A4800016D62A3E1867AD9504107EF407FA754F6C
-:10A49000C8DBB91D867ACBC2CADA6AE03F69E87CBC
-:10A4A000BEC7E9724F78D1B0F0AD6F900DF0AC5BE4
-:10A4B0006884AF993E8F872D35B1D62FE839DE7885
-:10A4C000D7D9C25EC4D331BEDEB7F97A7FDBD8EE0E
-:10A4D000C2F6E671F684BB87E5836F361AE9E2427D
-:10A4E000EB3CE6F653B82E0F19BF5B566F5CEF12CC
-:10A4F000D272150152594A541B3EEB484BF173007E
-:10A50000CAE38F2CA6F3798B909A1E9CEFB9DB8B54
-:10A510006B8BA3FD1FE6F0FEBCEEF66B50ECBCA30C
-:10A52000B414BB63CCE72D0E2781EFB7E2C0F379FB
-:10A530002E77DF413C23BD2E9563E2F96DCE47EFC8
-:10A54000340CCF474BEB86C7F3EFDD6EDE4F7B223B
-:10A55000AEF38418F75136EE89307B2FFAFBFDDF1E
-:10A56000887FFB89760BA5E370A21BF58807C9439A
-:10A57000A7475A53B9FE291C5E8F88E71B42AE9A43
-:10A58000DAD75903363D3E4ADC8CCF45B96EA1710E
-:10A590009EEF27BBD9B8C43D3AE8D2C90DAE5F855E
-:10A5A000BE7BE0C989EFA3FEF471FEAF0B7E6A4368
-:10A5B00078807CBDCB85EB7ADDE246F95A762C605B
-:10A5C000D3C3EFCA1406BF93BB8787DF955C1E5DBC
-:10A5D00048CE9AD7FBC13FDD3D19FBFDE09FBEB0E1
-:10A5E000E9FB5FFA652E89A447CBD7D74B81700C66
-:10A5F0003EBBDDAD8C08EEB79BE078FD97A369FF0D
-:10A600001E99B4F4C45A17CA37E87749B0C2E605B0
-:10A6100078DEB0595225E882A4B27E6E10F2CEEAFE
-:10A620001B5D0B70F7B6B7DC118CD14F3987F79FE4
-:10A630009CC194587C36C81F9C1E44BBA5D6902D47
-:10A64000567BB35EEDE77C6E6EB700E9D13B727A64
-:10A650001CB4834CED473A8FE9298C2FD313227F0A
-:10A660004479448A8C76D805C735B5378F3B1FE1CE
-:10A670003E35FEF827FF2A37C682C3B75319FD8639
-:10A6800082403F31EB5DB4FE75C2F4AB164EA2FAC8
-:10A69000F0C4EE1BEE45F3EDC6F9771C4135F972B7
-:10A6A000B29F8EDF103C5A8D6025E71E988478FF9C
-:10A6B000BCE6817B4B616A279550BB0B3E38B945A0
-:10A6C000A2768B799CD7B93E7913E5E9E5D81F616D
-:10A6D000743B077ACB06B0CB81752854C8B7137C7E
-:10A6E0007A3BD5B3E98B563209ED87E01617BC1FCC
-:10A6F000B7F9D38DA8970909D3EF3FB2A93753789B
-:10A700001366E7F6753B776E8776AF25337C10A22C
-:10A710008E0E16EBE484D54DCB23C5CF1B71F073A1
-:10A72000B1724AAC33DE380079FA7D6D95B353BA15
-:10A7300002ED1DF71D088F816A97BB1BD6539B1036
-:10A740005880EB3BFABAC5D2E6A7DD527B6511FE15
-:10A750000643FBAFF67F17ED99450BE58003CA7DF5
-:10A76000F81EC65B52E9D4A41450116F2CFC11E200
-:10A77000E781BA049F0C24513BDBFD4719DAD7CEA1
-:10A780004BF26D8172596F7E9B07EAEB6A2437F6B4
-:10A79000F7E2C229AE7E585FD226E827073B3B5E30
-:10A7A000533586901FE2AFD3099B30C0E20D22EAF9
-:10A7B000D3B6CD017930C1BBDFE204508F494BDB0A
-:10A7C000668779DED516CC72A742BBFB4E74DAAF32
-:10A7D00022242323D03B5B2524E1FE5335F651B0E0
-:10A7E000CE47797FDA279D8199A04F2D21BF04F5AF
-:10A7F00093EEB7CEB75E09F82F10FD676DC3FA254B
-:10A800007357ACDD0FF5756913E65BA1FFB2063136
-:10A810009F2BE65759E1FD4CD1BED481F3F5248935
-:10A8200032CCB79C105B7E74FED62C183F4D94CB77
-:10A83000E7CF816FDFAA68A9B242FF7BD2666D2B9A
-:10A84000721032ADA6C21D80F53C75FF92F94940E9
-:10A850003FFB09D029D4EFBB7FD97C9CBF47B6B062
-:10A86000FEB57A3ABFB2066D02D64BA4615B0DAC61
-:10A870007BBDBDFF0892EB864D9A3D037E49921841
-:10A880009DD86D2D815C80BBED404524974EA78BF4
-:10A89000D1675EA418F5D860B910CAC5BA72162B74
-:10A8A000EFDF42AE8F256F5BD299DCDB9F18BB5E7A
-:10A8B0004A63F218E046F549CA3112D81B43AF9CEF
-:10A8C0004875D276871389664F8BF2DBB5C0C3E536
-:10A8D000C097C4CEE629FA1942D75CEE10EDDA34FF
-:10A8E00094A70B399D16A812F577494B52782C3A4C
-:10A8F000D824625D8C2248B6D0F97A65E9FA5AE824
-:10A900002F239184F6C1D39B4E6819BE0FEC73467A
-:10A91000FB7B95B116A92E08EEC6FEAA33B34BDA1F
-:10A92000FDD17E60DE1DF6C986795BCBD3B07E514A
-:10A93000C9AD453A7816B175001DD0EF60981FCDAE
-:10A9400006BED8DF3B211FEDF7A7538D7C5DD65B9C
-:10A950006923F0FD92742E4F7CEC7B6F15933F03BF
-:10A96000B72685915F895D2D09EAECCEDC34068F30
-:10A97000AABB173E8CED9A7A6D2401DA6DDC5791F3
-:10A980004986D18B4D5FCE20E129BAB235A2A0DC39
-:10A9900069FA72167D5F75F7AB0AF229F6E38379DF
-:10A9A0006D74043255845B7B6CFC83434EE7DDF4AD
-:10A9B000652AD1A6E8DF333845FBF7D0FA0BAD2B7B
-:10A9C000DA9F4CC2E9C3F5A7D0FA41B85B39DC95F0
-:10A9D000D8F3ACE4F042785B74F575486F4E2AFD0D
-:10A9E000681CA5EF1B45DD28EFA3E36EA1FDEFB7C3
-:10A9F000021ED10EEC4DF4A15D5C6605F9E9C1FEC5
-:10AA0000D2DC9A14A50F411702AFFBD35A2AE87A79
-:10AA1000AF91DCDD31ECF8F9827F16327B2CB3216B
-:10AA200024AFD2D1BFE007E87F3FEFBFB49CF2CFA5
-:10AA3000BF327E00BE5981FC8B760BD2A11A295EF3
-:10AA4000E41A3AFF674076607BC02383FF35CE303F
-:10AA5000CE47C06D28FC732F80CFD1B4BEACF79029
-:10AA600082F4D614876F17A427D3EF328F4592D183
-:10AA7000AF7D8EDB1DFB7BA63866205F2CB41014E7
-:10AA800061B86EB457CB660AF9FDC42B95207F33AD
-:10AA90004519E5AD0FF130287F23767BB4FD550FC6
-:10AAA0003C31BF03E57302E0BF88DAA176A2F32749
-:10AAB00036A53139561E2231ED96DA7466B708781C
-:10AAC0007F6F5315F91DACEF502AE3CBF27E4D5A40
-:10AAD0005514E56BB39C7A98E3F141FEFCC7CB2992
-:10AAE000E90272AA96CB29F6FE3098F9D82E2323D4
-:10AAF000522C814E5CFDCA94B1E8CFDC9625FB3E1A
-:10AB000006BE5A2CA9A39E827EEBEC3E1A27137434
-:10AB10005247EC3E27C21D8CA6F312DA070E5AC626
-:10AB20001FB44B3EEB92181D125F4A5D717C3924B5
-:10AB3000E6715B9642C75BBD6D6C4A483F3FAE27EE
-:10AB4000AE4D883C450A86F2B928C3FCD75B645DEC
-:10AB5000BD93E9B33FB8024FA741F9288F43812243
-:10AB600003A72A3AFEAFB93E31DB4B8B93399FA046
-:10AB70007949F9D8429DD3CCCE8430619F68E8A74B
-:10AB800066F6303ACA6C88589A747470242D8F36E1
-:10AB90006A5806956077D5D8AB021FEBE4D8CB1284
-:10ABA000A9A7710412998A7CFA521A31CCA3410EDA
-:10ABB000E64968B76626A82867004F140E871DC4AB
-:10ABC000EA80715F8227E2AD5ABEF5059B07E94036
-:10ABD00052DB29F47772FB944450DF5C3B3B89DA0B
-:10ABE000ADE4DCED63305EE14D62740BFDD8793F7E
-:10ABF000764A275CEEFD66F4F86ED44F427E0A3C3E
-:10AC0000907332ED4FD41F966AF3DC503EECBDBC1E
-:10AC1000A45D32DA3F680F45EDA7DBB6CDB3A2BD28
-:10AC2000D313B1000BB5691BE7DF897638D84F0E17
-:10AC300058CF47694C0F1EF66B7232F63716D601A5
-:10AC4000AF8E24868A5A9C517C808D1342FC6528E5
-:10AC5000F07432FEC0675B3AE33397873D97F16744
-:10AC600046326B6FA6B79B787D00790F9EDB2B98E1
-:10AC70009C30B7FB6FCEBFEBED5A4D46BEDEBE0A31
-:10AC800012A4432B6176D65F39DE409F517855DDA3
-:10AC9000DD90827AF3F3DE2529A4282A476DF63762
-:10ACA000467F0C72244216FF33F2ABF2964CD05E14
-:10ACB000BECB067400ED94D4903B0D9EE949B1FDE6
-:10ACC000E6317C9DE9E85743BB7BB9DF63FB722229
-:10ACD000F5B733B87D969C5547E53AC2D207704E1A
-:10ACE00021039A5B87C794728BC17FB07D39897EBF
-:10ACF0007FF1F643491CFBA1D4603F8871CD76C437
-:10AD00007BAD5974FEE2FB15596F56135DFB95A49C
-:10AD1000FF2EEC6FE5C65C43BC289EFD319DC3074A
-:10AD2000ED052DE6BC14C3FBF7C05FD4F4E39F60D0
-:10AD3000E347C74D02868B8EFBD7B4C08C741A0FC5
-:10AD40009AE93E3E111E60C39F97A9DE61FA1A9EE2
-:10AD50003B9D542FD5A0DC167E12F2BF3B05F9BBFC
-:10AD6000A22ADDABD393FC3BB33C3AC8E31A07B944
-:10AD7000BE493926ECC6449F2445F5CE50BDC5EDED
-:10AD800062937CBC909D0D74ABE9ED8021FC92FE3A
-:10AD900055EDCB8238F431EE1F625F96CD0CC9C5FC
-:10ADA000283F6B2432161ED3E618F5FDB7D39D74E9
-:10ADB0005DDF0686D3FB2D8B1A8CED5AD399BFD25B
-:10ADC0008AEDBC1786A75E1F4932CA3DD65F33CADB
-:10ADD0001BC0B3FFD4EB8A0FE4F0F3DC1EDAE50905
-:10ADE0006C45BAE8484C9E847AA223717418E31229
-:10ADF0003BFFBBAA7027FAE9AFD9D46EECF600F39B
-:10AE0000F32B966F6CB7C27B5B8FE44E20D1793AFF
-:10AE100037498135404AF7737C3579D87A9A3C11A5
-:10AE2000650C8C9FD3C4E691D7F38264D5C9BBBCB3
-:10AE300046D6EEB1749B41FF8479F9F17411EF08A5
-:10AE4000B7559762FB8015F741727A241A1FCE69B5
-:10AE50000140003DE4A8AC7FA71A966E288AAEB7E1
-:10AE6000D3525B847AA2332349453D71CA137A12C7
-:10AE7000F9A8A92F1241704DEBEBB5A2BD67F506FD
-:10AE80007E807010EBF4C9EE1C94B3497D6C7E5D3E
-:10AE900026BA27E4BB3C3EDBCDE4AF4C5E268817E8
-:10AEA0009421305EC69642AAA744FB8C34AE37325A
-:10AEB00048E8696A67914E42F146E83A32B68CA397
-:10AEC000F6BEC06BD4AE1A3F19EDAA821D11EB6A13
-:10AED000B45B1F8B1DAF3FCCE50FAC2342E5C481B3
-:10AEE00091C565443B5B1CBF5AD07D524D6C7B15B0
-:10AEF0003401ADAF58EEB90ED7DDD4A19004290AC4
-:10AF00007FAB37F806CE27A767A784B031D3594760
-:10AF1000DA0FA55C58E7ED3713B74CE2CFBB699366
-:10AF20001C58A3E7E70E85E265A762DCDF137EC647
-:10AF300069AE8FCABDC1DFE1F8CD07EE5310CF3740
-:10AF4000EFFE50196E5F67A470931A99FFD2546F89
-:10AF50000FE37A2B965B291ED7752861944F4D7BA2
-:10AF6000F7452C68676F262AF27F53CFBE2339003E
-:10AF70009FDCA6C054D9A7F39F9BC212CE2703889B
-:10AF8000B1B788CA4D05F5B699BED14E467BE58866
-:10AF900083F1FFE90AA786F1B4D3B65013B63B9DFF
-:10AFA0009DA46AFE28DC5FDA37EF650958DCF5748A
-:10AFB00042049F9D96EE2C3BB4EB9CA0A8484F56B4
-:10AFC0006FC8EE8175A45983FBF1FB548F4B6D83E1
-:10AFD0006F7D096432D5D72384C334135D4CDBCC39
-:10AFE000F865BA2759D88193512EE57B5CC28EA2B1
-:10AFF000F2EA888DADA383B0F9B6A507323D48B714
-:10B00000EE343A6E4E5344423FC03C6E94AE02A3BF
-:10B010003CDE8B99678F82727E1D973715CB774BFD
-:10B02000BFD3D1419187EDCFE6ECDD29A17F08F5B3
-:10B030006DD51EDA9E24A0BCD9CBFCE27550BF565C
-:10B04000275FC43A62C89929383F675FEF8B4CCEBF
-:10B050004428FD89F99AF139DBC3ECBBB96026D0ED
-:10B06000F78A56E883FE8EE427D2FE04DF9BF9744C
-:10B07000B687D1794EFD6EC95244E382D49E14F353
-:10B0800013ED76792AAB3C140EBD140EEBEBAD2C10
-:10B09000DEC0E753AD04C7A05F56EB61FB5D87964A
-:10B0A000BDAFF443F9C19F1DA5F4B8BE4B0A507F54
-:10B0B000A1EBA8B204E376DAFF91314EBB80992868
-:10B0C000E4A19F1EA57A65C17E168F5FBF7F9FF5A5
-:10B0D0000667944EFDA70EAD443A5BDF93401C1209
-:10B0E000E28FADD74CA7206728DD134DA1FB5C2074
-:10B0F00027352A5749C88F7E8A90C36DE97C5FCE79
-:10B10000C9DEAFE1F316FD46E5A783D2BBFFD4E469
-:10B11000437680E77A5552C174023BDC47DB43FF3C
-:10B12000112A878144D15F13FD9BE1D7E5617A2D18
-:10B13000069E5B3C31F489D0B3FEC72B093E05FE69
-:10B14000AC1CEE83FADDA3D07E5B3D563A9F8E0A9F
-:10B1500016D7EEB0313DD2D1660F235FBF943AF7D8
-:10B160006509E4A52B4D89E0F3B0657513D61FCEB4
-:10B1700061F3E8B46C296C617A4CF350FC2513261A
-:10B180009F983C7AF0274C9E34694EEA3F3685EA18
-:10B19000D6D07D098F43C57D09127A5159E28AD2F2
-:10B1A0008319BFBEA75F507C50BFA087F141146ECA
-:10B1B0004C5F09BA053947F1DE26E2888037842BD7
-:10B1C000F8F56D187F107E7D72435073F986F26B2F
-:10B1D0003AF7EBA772BFDE566EFF9BFAF5EB36FD32
-:10B1E00007F5836EC97A853E05BF80FF68E0ABA78F
-:10B1F000B89F763F7FEEE7FCB9AEB487F2C3BA8F53
-:10B200005B281F396B983C71F619E52021F7F0F5A2
-:10B21000EF60F498D43317F725AAFF4D72B793F86F
-:10B22000F3BE496AF94FCC9321FB78FEC639B0F2E0
-:10B23000CB00AE0E0E03DEEE08E7FBD37B0011C899
-:10B2400097D61665387BF842FD92C89B12E27B1DAB
-:10B2500087F5E9BD5557FE1EE38C7B52683ECB2730
-:10B260007B17FFAFDFC3F7A777CF56514F7BDA834A
-:10B27000947E06BC0E15E3A7203E6B24A087B69EE5
-:10B280005F25CFC0FDB21F5D3119E5E67B7C9EA72F
-:10B290007E226F42F86CF9C18F6761FDBAB0948E5F
-:10B2A000F6E3E93DFFF657D48B8DBB37D0BCB4F63F
-:10B2B0001FFD92DAE596F04EF67E4F0AB5334FEE5B
-:10B2C000BA6F16C2BDBDA79DD69FDAB593960FFD86
-:10B2D000E0C7BFF80BDA1DC16415DB9DFAC97DDF3D
-:10B2E000F90BD2795DB28AEB680A59D97EAEA06FAC
-:10B2F000B3DCDAF702E553412F0B50EF229CEA99B9
-:10B30000FC11F4FC11DF6F5ACDF7B13EDAEE6A8C16
-:10B31000156794BC6CBD188BA172AC5EA271B64E61
-:10B32000A01A8C77742692727C261545945C186757
-:10B3300059C3BE59D4EED13EBC11DB2F3EE020DB19
-:10B34000695C0E83BAD17DB0621083C7C16F86DE9F
-:10B35000779F07BA7D1BE403D53B267F6071E72BFF
-:10B360007F46395A67EF7F0145A178DFC9E337D0BF
-:10B370009EEA9DB28DB1E3A40EAF93EB6DA6377339
-:10B38000F6D7E6F9A89C4850C7EAECD351C75AB69D
-:10B39000637A524E63EF5C5CC7D585ABA650BAC0EA
-:10B3A000F81FEA1FCD49FB5F8FF14BE0BF1C2F93C5
-:10B3B0009F196EE2990EE3575B89C7894F42DEB44D
-:10B3C0005139F204ED17EC0F6A57F97EB9EC09B464
-:10B3D000471EB285B2A7623F9D5C6FED66F386EFB4
-:10B3E000DDB88F0AFDB9A74FA6FDF4DAD2E8F71A47
-:10B3F000FB7EDEEE36293A5FA0D4D1A8B7B0BF52AB
-:10B4000027EA19AD9EE2C7A7D0759DC226D974DD83
-:10B4100093561447F9D71CF7417986FBC3E5DE8ABA
-:10B42000295E6FF429E2416678DE89F5D0CF33DEFC
-:10B43000007D923D467F3B9EBD7268D919A67F9FD5
-:10B44000FF90CA9B66A4631C3FF4B141FFDE20E875
-:10B45000F8D90F291DDF7080E9DFE603250AD2ED58
-:10B4600027AD01F23B30409B2B816E817E1F92FA0B
-:10B470006FA4F92ECF3ADC18D73BC3F5CDBA1D1F08
-:10B480001E97011EF907B2A99F7FE659473DF67343
-:10B49000D862A1F03CDC3D7167BBA49F27F30BC0D1
-:10B4A0000EA6A4DA0C762AB383D7DC877EDAFA46B6
-:10B4B000A222FF379BE8A7F9C0514A2FC20EF63FE0
-:10B4C000BE680DB33F1DAA03FDB839CC1E25608FA1
-:10B4D00062FBD439E13685D2574919D2D7A165BF6D
-:10B4E000D88A7ABC790E7163FF0F8D0A3C9B4BD7CB
-:10B4F0002311CC7379C8D6556985EF1FAAF6B90117
-:10B500009200B7DDD4EE25850AD7736BA8BDDC9C0D
-:10B51000F54D95F299591E3CDB46EDAE665F229DD6
-:10B52000CF8203D26DCC1E7112367F89D2E782F0B2
-:10B530008C30C6CFFEC8E127E078C6D6BB12E171D9
-:10B54000E6A7408850BF600EA3D7D4393D548EBCC7
-:10B55000F4EC3CAAC7055DBA9E49A0FA3CCDEA9638
-:10B5600054AAD71627E8F1DA65637A2995EB998210
-:10B570001D0CBF6D5EA697DABC16FE548CF117B792
-:10B580003609F5EE1F39FEA91841F9CEE5C9FA359D
-:10B5900011CA4F4D7B597F9E8440C9ED3AFAF5544C
-:10B5A00031BD28F603707FA03686BC7892CFC3FFEA
-:10B5B000F8EAFBD05EBE1AF08E2A25A790CB51A0E8
-:10B5C0000B845B4E6390D2C1D59E9B54CC4FF5A6A5
-:10B5D00013EA2F0EB4292456DCE7877C5DDEF46085
-:10B5E00029C6A1BD992E6AE778E50A8B03BF2B9186
-:10B5F000D46E1FDDF7A476DE80375BED36F07BB0CE
-:10B60000D402ED4E64B8189EC3BFB12E2A463EF454
-:10B61000097FDD60F70DF5BB99DDB8B04B9B847EEB
-:10B6200088D8D7107008B725D6EBE5670F976FE17C
-:10B63000F12C9E0AF6BD93C6B5DD300EFAF7DD3368
-:10B640007631FFBE9DB6FB9E97D947D5B03EB4DBA1
-:10B65000BC05C18D4C9FBAD458F028E77AE5D0B22A
-:10B660009525E85736D73955E4B7079F9756537A4B
-:10B67000C66021FADDA135140F04F080FC4042CCF5
-:10B680002F6D6E098663D37B2DE5BF66E43F89D2BB
-:10B690003B8DC303BD8719BD33FD27FC7F948FFA13
-:10B6A000BC432107847C6956FAC7211D0B7E689E26
-:10B6B000D53F0EE136527972C606FC8FFC0370400E
-:10B6C000FE11FCE27A8EF1C9F6365F05D66FAF2621
-:10B6D000EE769D3E32FB4B384FF43B855C3FE509EF
-:10B6E0007E8CF2B7D912D98AF915420E373FB76D61
-:10B6F0005CACFC372187ED5626DFECE1A470BB8EF5
-:10B70000BE70CFCF35993E693E4FD2A6D8F1912F6A
-:10B71000BC4E1EC71F59BE4406EA729437DD493439
-:10B72000AF5DC48BCCFD9EE4F426F022FC16DC77E2
-:10B73000C0F6E9198C5E940CC69F7919223E1B361F
-:10B74000F83D3E4BE843CC338AA7BFC4777FABF8C4
-:10B75000951847E85133FEC5BE09AEA7B6287EBB93
-:10B76000AE17987C32D3E3182E373EC4B5C2FF7FA4
-:10B77000E7FB5C43F1CBFA21A1F186BCB84ECBBE0E
-:10B78000C65871B0175A79BED463E3479477F7EF80
-:10B79000BCFDBD3C2F8CAC196FC8B372AABE368CF1
-:10B7A000A35E71D05722D371591CCB358B7C8A7A1A
-:10B7B00038B9BCAB10CF4D7883C6FD92CCFA44C3E8
-:10B7C0007E447628CD50CE6DCC31B41FD5926FA873
-:10B7D000BF6CD30443BD5F9B6C2817744E37B41FF6
-:10B7E000DB5569285FFEC8D586F6E3C38B0CE5ED13
-:10B7F0006D3DF58897897BAE337C7785B5DF520246
-:10B80000EF8B7B561BF3C74CF0ACFCAB1C930E6F5D
-:10B81000CAF0537C5D71C0088F9472233C305D0E7A
-:10B82000E19C42787F897F5687CB6F4D21D63FF5CB
-:10B830008BEFFD43E981D8DDA5FABC8428FD840D9A
-:10B84000798B9556D9340FED2BD15FBC798AFDB633
-:10B85000B8EB8803B7ED837CCFE062E3CB4A995520
-:10B860003F2C5C6C17820BE957470217F37EDF60B1
-:10B87000DCD9D4DF96A4669A27FC261674F6717F6D
-:10B88000ABF13CCC522D85E9A1E0E20BD8D12C0ED6
-:10B890001C4A60FB95E6FA57B85CFC03C084CE678F
-:10B8A000847CFD3EC7431FCF9F1FC2D79B3E3D9C5C
-:10B8B00089F2BB8650BFD9DDD2F629EAADEBAD11D6
-:10B8C0005202F37E90AFE7212E171E6975D37E1EBC
-:10B8D000E5FB918FB5FAE8FBC75B0BE933DCAAD235
-:10B8E000F7DDADE5F4B91BEC397C3ED95A439F7BBB
-:10B8F0005A83B4DD0F5BEBE9736F6B88CD6B08BEC9
-:10B900004819B57382E931E3A5AB347944782272E2
-:10B910005E4C7D19B71FB961D8FCF24D7DD28F5FA7
-:10B92000D4F1CDBB192E0FDDDF9C46A6E1FEE685E6
-:10B93000BEFFA295FCF8C5B123E723414FE45CFAB2
-:10B94000B8608CF85188E7553E9911FAAEE68C0F35
-:10B95000AF289DC586539DFD4C0E3AEB93D066D023
-:10B960007D2FCE9F88725D2825A6DDE0CD64F45939
-:10B970009FC0F6E3979BF8FB5BBCFE5B994CDFBD79
-:10B980001B47CE38332DC29FB7D1FDC1217C77EF45
-:10B9900055B1E0BB35D367E063F3B915733FEFDA18
-:10B9A000BA46A931F8EC42FD88F599BF5B9AC9E423
-:10B9B000D6C64CC2E4E4FF67FCF9EE5A17F51F1037
-:10B9C0006E5EDDFADF5D9B541F2B2EF39D4C1BF347
-:10B9D000B703A0B3D3A8A9AF29682B16121FDBF7B2
-:10B9E0001DE3C6F890C80B884FAF561A47A2309493
-:10B9F00087C215F0E1530AA07FEBE038112B8EA32C
-:10BA00005AA2FA0D736D88EEFC873C941EE07B4DC4
-:10BA1000A1793DFD3938BF8BA527223F3676B87D09
-:10BA2000BA21DF5FA49CB931F3EF2B67049F9373B6
-:10BA30000F8C8DA527EB51CE4C075193F9289333EA
-:10BA400017E8F762E1572FF7D3FDEB11C3EF8067DB
-:10BA50004471A92F1CC993D0B8DA6467CF3B139304
-:10BA6000BBF1F9856374982413F200CE13DA69955B
-:10BA7000849DDF7A5FF84D2DD3E8FE4A76F05F3281
-:10BA8000A17EB5C2FCC53319818732615D897C5FB7
-:10BA90003891EF0B2B99CA562C9340215DD7247017
-:10BAA00097316EB1D5E21B8DEBFA5852C7A3DFE296
-:10BAB000B684557C26934831CBCF0B87D05F4B9F04
-:10BAC00098E8437F37711C21BD343EAE3A308EA6D4
-:10BAD00024F5BF3E06FDDBE7AD345E3409F351A12A
-:10BAE0003CE97BB9618DCE3348E5453A87E376B4CE
-:10BAF000CBE1FBEF4BA1A770DE27DD76CD02F37A19
-:10BB0000A0738A230DDE47F6C89A9282F931A7EF17
-:10BB10005F00EBBDA257A671E72BC89457C6A09C47
-:10BB2000E9B5D1FDDF7556B203F9281E7C3FF95601
-:10BB3000EC3C30922519F2BBCCF51F703DF0499CCE
-:10BB40007CE3DF70392AF2676C227FC61B18367FD0
-:10BB5000C666CA9FB1598304F7856D83F9330D8496
-:10BB6000E6CF403FFAFC994F2A63CFE31D3E0FDB3F
-:10BB7000974971FA4DA6EF3FC91F7E9DB62F1D86CE
-:10BB80007CECE8F74EFA3E5EFECE001FFF9338F9DC
-:10BB90004BA707FBCF265ABAFE3B46CFD171F268BE
-:10BBA000BDCD940714AD67F93F1DA98C4E5EC872D8
-:10BBB0007B5641D7AB483F3DCF79BDD363C3785265
-:10BBC00090A8FBE8F91EAB6DA05FF0613EB6B37EB6
-:10BBD0008476B705242FDADDD76FB27DD4AF935BBF
-:10BBE000B5016399607B9D1C5E88316CE4A7098573
-:10BBF00034FFEF33E24B710F23471BEC72D0AA5B8B
-:10BC0000475F1C3BA2348BC1A72F3B36FC466559CE
-:10BC10000C79CB43BF4FE6E73ED839B4DBDDC3CB6D
-:10BC20004F846F285DDFBF190F1E5A7F21387BDBE1
-:10BC3000197F0F54482CCFFF6F0EEF549EEFC6CEE6
-:10BC40000FD84CF9EA0BB3CDF366F9EAF7A706CBA8
-:10BC5000B2D02EB3FAC6E9CF0BECB7069226C3B327
-:10BC60008FCB1D335C3667317BCFBCEEFD3CEF3EA6
-:10BC700051262DFB74F037AFB785E351B4EFB0B167
-:10BC8000FD2C147C76907B2B0893B3CBB2F2F93960
-:10BC900097542BE2AB81754156B88FD0FD2501E753
-:10BCA00021F0E37037C331487C2B31BFFB42F05C9D
-:10BCB00075345141B9BFD23E70187DD5FE5ECBDBE5
-:10BCC00063E0F9A173CCF1DD04F7E10A9F39443058
-:10BCD0003EA2B27C0A3287DA3D92962B9F9F387241
-:10BCE000BB676B72A810F9E26389C56B853EDA9A6F
-:10BCF000736A1CE6D7BF9F5651943D95C6DF03E992
-:10BD0000483F3F4F60F4F308F404E50DBF184FCFF0
-:10BD1000C12FC90E4DC8F646F3FB4860601CE623F0
-:10BD20005C2C7CE0C786F47321F8ACCD62FCDD9717
-:10BD30001C9B3E1EE37C7821BEA0E7CF4AFF7E7CA1
-:10BD400021E029F62FC4FC266433392C9E026EE6CE
-:10BD50003CA209D916DE8EE5112DC90E52389F1D61
-:10BD6000F5E97107CCBD4F897DAF434F1CFE30AF65
-:10BD70005FC0FBEF257FFB1263CFEFC5FFE1F91535
-:10BD8000E3FC008E7D9362CFEFDD11CE2F4806DEFF
-:10BD90004FFD3BE82FC07331F21DE918A072B12F9F
-:10BDA0002DF63CBF1CF13C43B6BF879E15F44DB445
-:10BDB000558D74DF3E2B31E6BEFD52F0A3D00F321D
-:10BDC000EFDF8B7D7A901F74BD75F68195E988F75A
-:10BDD000397CDD1924928AFB9ABF48A0FB0043E41A
-:10BDE0001AE77380978DC26BE1008D67F48D8B2D00
-:10BDF000176CD90C5E83ED3BD938F1CE1FB8387F74
-:10BE00005EE8FC01290DD1386085DD1991010FB77D
-:10BE1000717C28B9B7A868175664BD7A0CD709F0A9
-:10BE20003F3D084F5D5EDFA9D697DD636CF1E5F617
-:10BE30003AF9E9B29618EBF167847C280F06DBED3E
-:10BE400079C53D4687AF62D26F61E7A7072C06FF31
-:10BE500038935C947FFC3307E3E7F7D382541FA049
-:10BE60007E40BDB3F5B92B4B1099685F605ECF8003
-:10BE70002B91CAD1F69CE9853E1D3C2BB3855D29EB
-:10BE8000C7B117BFDEB980A8BD2419ECD668FF562C
-:10BE9000FA5EE0A7C2F9EB98F8F06704E6213C3FB0
-:10BEA0004F0BD4E03ACDF0D3EE9E994AFD6584DF86
-:10BEB000EC687F83F88F83E75B33028BB0BF89E93F
-:10BEC0003E16BF10F97C83710BABFBB83D0AEF91B6
-:10BED000E2E55EFC05FCD5DBB2032BB17F2581F3E7
-:10BEE0002371D2F3E3C25E2126BB8694B3FCD21544
-:10BEF00059AFFE19E33E5B9319CB6EFD8E83E6D9F5
-:10BF00005D2FB9155C37D81FEF7D1FDA8748E4BD78
-:10BF10006FD37D2D616724C9E793463E4FE1375FBC
-:10BF200028BFFA10DA61309F4A8B93EE731E02B27B
-:10BF3000C906B951A9B067C53CA02AE8AF52CE3BAB
-:10BF4000D80FF3FA9C9C4EBB0ABE4EE4F1C58D4758
-:10BF5000A73A902E2BADB6537AB9658E7BDC956DE2
-:10BF60008C7B7C4E16FE33DD0B2E64FEFF030B2B09
-:10BF700033F57197C1B8873897A6AD62F2D424E73C
-:10BF8000843CB3D8D93D2324407CEE0C1A3F627028
-:10BF900007E71AEFBDBA4A94D13981F24C8E2409D1
-:10BFA000BF87755FC59F6475280BE50CA6F3E07825
-:10BFB000E0F565E1B3FD4AD587CFD952D0CAE61185
-:10BFC00066F987A4250FDB5BECFD328E2FE214743B
-:10BFD0002619D88F1897955DBCDC51F7D9CAB5BE24
-:10BFE000A1F10CE27451BB57E1F33BE9766A165DAF
-:10BFF0009C23C1193949F356F9D31CEFB853D634F1
-:10C00000CCDB4E243D545E3A9D7FD410186EE296F0
-:10C01000B0FC7D29F433E4B7E34A17F1C3FBB33F27
-:10C02000FF8220FED2F16458013E8DFAC9EBDC4854
-:10C03000F3A1BD41AB492F8524E4A3CC7AF37BA3C4
-:10C04000BEB2933E7A6E488A04B3CEA75F388E1391
-:10C050002F7E63AB64A81FB899D9C36F27B2EFDFF7
-:10C060004E64DF1DE37AA6394D212CBE63B7A33D94
-:10C070007FC675028F6AA23EE9447D62B705285EDD
-:10C08000855E59BFFF5682786B3E504BE1F05B896D
-:10C09000ED8F6A2B249AC7B094E7DFD51791D702AA
-:10C0A00038B59C7CA6CF5E0EAD688272DDABA4383D
-:10C0B00002ED4A6607ABF15E97F662A26E8172BB33
-:10C0C00023F4D44F711D47D93D631BF8795AC0C47E
-:10C0D000BABDD0FFCEEB46A9DB714955035B314FAA
-:10C0E00068601B71635EC910FA3D07FC00F4B00B79
-:10C0F000CB30EF0D6B42FF7A07B4CF7E95A8B40D1D
-:10C10000AF471F05F12771BAC0F7B3E1FD064E47EF
-:10C11000050725B6BFEF61F77FD1CEF17E2E3BFB41
-:10C1200075C3C18A6BA7C2BC0A7AA750F21E03ED81
-:10C1300031FF093310587B6289D57E0CB6F7E17E5A
-:10C140003EC30FC951E8BD4984CBBF69263E9C114F
-:10C15000E5075A5FC2CB1BB89E32F00DF603FE7A9C
-:10C16000A08C6DF7D3EF3C8C3F54227E183F4F27B5
-:10C17000D11FECB72A3A0E95CB7378DDE1E5F36970
-:10C18000DEF7346BE405E4F719FC59C29FC8EF767B
-:10C1900080E3326BCB612FAC27751351DB709406B3
-:10C1A0005F3BF6574A8232C2B9CCBDAD1DE7776519
-:10C1B000C3D174A4AF753905949E66DAD502079091
-:10C1C000487BB9AABA0BF09E3189C26549BD3D8C46
-:10C1D000F96D4B06EFF909F99702FF2C0BB1BC661C
-:10C1E0002C37E8E2B522EF6F6902F8D531E4F7BAEF
-:10C1F0001C662789EF37F07329A2FEA61C96FF71F3
-:10C200004DCEDCD21C9A97C4F2A181FFA76159C818
-:10C21000151897E6AB2C26011BAE6B31E75FC1FF0B
-:10C220004B02B7537B7649D06897FE5662F8D69694
-:10C230004BD44E5C563FBCDD3A3747EC07E7B98F2D
-:10C240002745DF0BBA12F27C11EA7794C335A0CFF1
-:10C25000757673C39DE752E977994FAE3F7F59F4E6
-:10C260001CCC06D33998667E0E66C381365B06D237
-:10C270003B3F07B3E1E0875BF5F97F024E43CFC157
-:10C280000CD0BCC7A54AF8053C1FB4F4165823B41B
-:10C29000FF153F37F1229E9B981CA523D7758E086A
-:10C2A000CBAB0BD0FCBE3C77928AF9289D96C93463
-:10C2B0009FA833D9A5EAF377B6B7B554633B914746
-:10C2C00024CEBD2C8DB35F7C7B0EB3B71F92583E3E
-:10C2D00097B6DC4EE1ED95C931FDF97E6F4190E6F0
-:10C2E000D195E6F8447B1A5FC0BCD329F00C839942
-:10C2F000C6F0C5BE37CB07E8AF03FBAB2A5069FEDB
-:10C300004C550ACB43F3A6074B6E2B8AF65B77900E
-:10C31000E5EDD5053F3DC2F26F6B4B119EF1E4BADE
-:10C32000597F01FD75E6C488D3DF29879A91FE6C99
-:10C3300095C1E56BA1DFB3AF2934CF8E6C0E4836C3
-:10C3400068F79357DC2A9EBFEBA808D656D37A2B02
-:10C350003D1F98514F2209505FFAAAD28DF97D8D69
-:10C36000A44BC17E1A4D7AEC16E78B0AF2E92DBB7D
-:10C370006D51BA249897A816A0C06BDA3B242E42C0
-:10C38000E590904F667A26638C72A844C85D900F42
-:10C390002CAFAF81E93DF2A484F1A1B3AE1332F723
-:10C3A000AFA9DC9B2A849549DE4F3DF812B567049E
-:10C3B0003C6781BC403F4EC2F793D8116EBABFA50F
-:10C3C0004985986F3A8324527A1B6247F0F9950E9B
-:10C3D000CE9FD94D424E56943393D48C1F188FD292
-:10C3E000B9D8E79B8AF7FAC073061FFF0B4BA0284A
-:10C3F000E2477C91B005E0BC556AA17AC78EF99FEF
-:10C40000F0DC2E85A85CFC99A6C908D72B49CBE2A5
-:10C41000857E8AF72339543EF626211E8E2BAA1DCF
-:10C42000EBAB3151903E8DF89AE77CD08AF09A9729
-:10C4300065C68B6645F8CEF70DC1173D571088834A
-:10C44000AF80902BC42857FCE41C3BD7BCEDC81D23
-:10C45000E81F5FC83E793023D48FF2339E9D122FA0
-:10C460001FEF2497C723CDC73B6B637EC574D27F74
-:10C47000E35E69289D9C39BC49CED2D193A0D3E715
-:10C48000787EBEF44B9EEF5BEAA2FA2FAA2F191D0D
-:10C4900094F1D274A42F1D1D5C75C01191619D256E
-:10C4A000FCFBE9480F93A3FA326271FA947CC4BB97
-:10C4B000DA29CB43EDE48C341FC5FF144B80E27FB7
-:10C4C0002A51D3B9DDA9E4C2FACBED3DED561FC523
-:10C4D000FFF7D1BFA9203E8AFF0A93DEA972D65981
-:10C4E000914EAAEC663C0728FEABDD43DE5BBE0A3C
-:10C4F000FE2F43FC0BBD3202FB14F0EFCB1D669FF9
-:10C50000311EFEC7E73A795CE3E2F06FC6BB9003E9
-:10C51000FB1CEE2A27C6831B593EF294D7C6B46390
-:10C520003963BD9F9E93D997AAFE8AD6B7B0FAD237
-:10C53000DE808CF732166C847A28EFF307ABB0BC40
-:10C54000619344E5E8D43743ED581EB399D5976C11
-:10C5500069F915DE6FB64163DF3F77722BBDA72205
-:10C56000BC957F5FD15585E50D9DECFB3FB8EC1A7E
-:10C57000FAE565C7C2EDF87EFC0E360F61F7CDE631
-:10C58000F4B64F7AFA57F4BB2EF6DD4D47EC89CC62
-:10C590005F6276DC2CBECED98FB1757A7E77758DD1
-:10C5A0000FE0BE7640B351B961692AA372348E9F01
-:10C5B000562175E5E1731EC80942F10E749ACFF257
-:10C5C00055BB6188B5B9CC0E11799E986F5EABC32F
-:10C5D000D7DA5CA66F45BB8C34C2F2921F65F7CDEB
-:10C5E0008A3CD4C8C344C2F801AE91EADF3879A9C5
-:10C5F000F30A5AA83E9D7799C847EDB7AE86714BAE
-:10C60000CEFFDFB9B1FCF2263EEE099E3F2FDE37AA
-:10C6100086FD16F44FF621F1D0FB7F7EFE1ADA2D4F
-:10C62000FB701F5977FFC83E3F2BFFEFDC67EFE938
-:10C630000427F7264B8B554325305AA2F7A97CA334
-:10C640009744529287CE7F9E954458DE049BFF8D7F
-:10C65000ED4AF7769D1DBF44888F9963A95EA9E3D3
-:10C660007812726309C717F0793BF2C7527B0BB59A
-:10C670001B9713A6D76F26611ADFB8D9C4E7EB9CC6
-:10C680007F7ADF82F6F31E233FAF87E9B07DF58125
-:10C69000C7DF05F8373EE272A3FE5FDF636CD7F8B1
-:10C6A000C86BC798FD65E4F746C1EF6123BF8341BE
-:10C6B000C1F8FDE10974DF469C0B74D807DED7484A
-:10C6C00074BD837ADFC47F0E3C2758887E8D85E554
-:10C6D00027F2B218F7B32EA69735D0CBDC0FA222E3
-:10C6E000F7B3BE05340FBE44E8512E67043F977080
-:10C6F0003D3F448FD798FD9D07299F4CE125B3FE10
-:10C70000167A5B9C3F847EA9FE067DFD5A00E6DB1F
-:10C710006B718611DE51BD1DA67C34D90EF2DA4252
-:10C72000F1F73CCAE9A91C6FED5CAFC7F50F9C1B84
-:10C7300063FA07E06FD07D84A17E41C460EF9BF176
-:10C7400016CFFE1FC49B03ECA924F4F709E3E31CF6
-:10C7500032A2FC1090DBEFE40EA3B79543ECFDC0D2
-:10C760004E078D2F8838BBE0BFDFE4B1F8C277B346
-:10C7700003EF613F7D7CBC3EDE7FDFADF3E8BEF7BB
-:10C780009F4880EE7B631E536E8CBC0BDCF7EED0B3
-:10C79000C54BFB5263C7C13FE17260621E5BDF198C
-:10C7A0006FE034F2D50985C5D94F24F26732DBA793
-:10C7B000F82297C57B27E6B1A72B8FCB119EDF7D93
-:10C7C00022CD189F17ED52F8F3E3567BB043170FB5
-:10C7D000F73D9CD0827ACC5BC0F3E137323A3EFB26
-:10C7E0006CEA4EFDFD7039791513F3304FA420A08B
-:10C7F00064637CE659A62F9AADFD0ADEEB93E20D49
-:10C80000D9F2302EE32381A7B11F5FBFB218E07DBC
-:10C8100096EFF79FE5F7009D75B0A798574E5EED30
-:10C8200044FCEEECADFD546E0C966BFBA95CC8C9E4
-:10C830000BD271CF2E11F5BC7C0F2B13EE57567017
-:10C840003EA171E31871E2A17161E33D371B94D8F9
-:10C85000FBD424CF6588F7AE38C8E2902BED646B2B
-:10C860002ED45F7F3093FA1B8DC9DA38A487AF1BB3
-:10C87000C73D3BAA97AE6B7BC5C0E8474BE9BE30CE
-:10C880008D17AD3FF812957FEB05DFEC37F2CDB495
-:10C89000BC91EDA798E3EC23E0A78ABC61ECA0670C
-:10C8A000507FD9A278B88DE75155CB4D551857FA1E
-:10C8B0006C0DA1E76B6F7B45A67475DB5312BD6FE2
-:10C8C00042D871EB399CE3AD0BCF27F8747205CFDA
-:10C8D00027F8747E1D9E4FD097F17C82BE3D9E4FFF
-:10C8E000D0D7E3F9047D3D9E4FD0974BC80DED188E
-:10C8F000A7DBD049DC611F3BAFA0FF1ECF2BE8CBED
-:10C90000785E41FF3D9E57D0973F230C6E9F3D269A
-:10C91000D3F83F9E5BD07F7FD32B3F298BE0B21DA6
-:10C920002C3FADDD01F0473AD402BD45009F351CD8
-:10C930003E78AE41DFEF27C9735F46FCACE9BD71BD
-:10C94000213EAF38708BA15FD2C5E4710BFC433838
-:10C95000DE488229E8CF4D26034730DED11C9654AD
-:10C960001CF7A6478C727BF01E93B0F1FD3AA28BA8
-:10C97000FFFA87C6FD3BF25C9EE32CB739471FEFF9
-:10C9800089D283538D201CDE94D558F450422E4F0B
-:10C99000A1719E97658C61903F909687664ABAFD1B
-:10C9A00001133C12B28C74E1F019E922A9D04817A6
-:10C9B0002ED5481729E546BA480D4C1816BEE9355C
-:10C9C000463A59273751BE17702E877F08E7C97836
-:10C9D0003325C217D689F162337C1B0FDEB715ED04
-:10C9E000FE8B856F4F1EDF57E1F0FD9CCCAC72FAD9
-:10C9F00068759DBD2C6AC794BEDC423781CDF1536A
-:10CA000001476147883828E87F6A4F47FD7AE6EF9B
-:10CA1000817DF04B94C3C715E6E72125A1DC5C4B73
-:10CA200042543EAD35D90737391F54D03E18B25E57
-:10CA3000B0CCF0DE42F37AD1DE22BAB894D93E907F
-:10CA40000E4A11D7245CEE4121A743E7A931149087
-:10CA50004622377EE40ABC85720B1D457B99216E08
-:10CA60001CD3EE13F3107011E3279016390BE9B9BC
-:10CA7000D06C9F19FD6BE18F8B78BB886B0B7F5A55
-:10CA8000F8316638CB97F9DB91FEA7B8851FDDFB3F
-:10CA90004D7C2FFC67B3DF3A781E00218BE76D7861
-:10CAA0009CFE6EEF6A3BBB8F8FF19D78BFD5B3289C
-:10CAB00065B83CCCBB5A8DE75F60198161CF13210B
-:10CAC000C83270DF89605085ECB8E6483FDEB1B30C
-:10CAD000E31BBF1E78119EDB8B9FECDF8275E7CED8
-:10CAE000CB08D7C1783E61E78315FE9D92B7F55616
-:10CAF000D4A389AA957CA4A30B3B68AA8F0AF9B892
-:10CB0000A827B206EB7FA3DFD7FF473DBF0BF0F9A5
-:10CB100068EC30F58ADA1833AFD6042F710D86A38E
-:10CB200068EE49B44F1C44B76EAA0F7565390A2FD9
-:10CB3000AA5A657A5E4AD407F0DE92AFBB2EC4FBD8
-:10CB400047367D3972F4639B7EFE619657600D1205
-:10CB5000CCBB553C50AFD72F8374080C55A65BDF78
-:10CB600008D6854C83EE27B34B18BEFF56EBEA3050
-:10CB7000E10BFB0D665CD2F3D32EF1F9452E71FC6F
-:10CB800092DA4B1B7E81DA4B1B7EDA253EBFC8252D
-:10CB90008E5FB2E8D29E5F60D1A58D5FED129F5F80
-:10CBA000E412C72F597C69C32FB0F8D2869F7689CB
-:10CBB000CF2F7269E357A376A0B33C42F05E095FC2
-:10CBC0000751FD3E3059E135FAF3052AA1791A845F
-:10CBD000FB25F9DC2FB96F474B3DBA50BB34C54735
-:10CBE000E341E0DF6741FD78C2EA77752EA271D696
-:10CBF000B651E372F09E2A67E7DC93786E6FBCC68D
-:10CC0000FC71F3DF0BAB0D18FFEEDAB5E5E986F248
-:10CC1000D45EE3BD15DF6C2C30D42F0F4D34FDDD19
-:10CC2000BC29C6BF47169C61BA7FE156A23F0F9947
-:10CC30004F222AC657F2EFB154E2BE99157DE62B7A
-:10CC4000E1FF6E857E17807F7AFF251F3CA1C1FE24
-:10CC5000FD0837C5D0BFD3547FB1E74F9F19CDE34F
-:10CC600031A6F3A7042F978C71DEDC9C8749AC3783
-:10CC7000D3F89CC0D7DDDB2CD4E5FD7C07A1F73BC6
-:10CC800056857D167AFF39C7DB444E7A62DDE15660
-:10CC9000E339F47C8D54223E0B3A8805E36BFEDDCC
-:10CCA000440D101A17A274B24B8B4D27BB88BB12D0
-:10CCB000EFE3DA1526F4EF6309BAB8DBE6CBC17D02
-:10CCC000B5899D8C1E049DF8904E92312FC87CDF53
-:10CCD00080195F647204E6BA6B477E9A3E1F95EC3A
-:10CCE0006570B7C3BFE1F055B8DB882F1FD195BF82
-:10CCF00002BE4E7F4D7C299E6024C583F14CE2C369
-:10CD00003CA9C3A3C659101EFE4E95FAFF35D00CA0
-:10CD1000E1ECEF64F7A8093C89FE76B492C81C9D4B
-:10CD2000FFE75723018473B55C5489F9E73B4B69EE
-:10CD3000C878087E76127722C6BD77765A12E9DD6A
-:10CD4000D407002FC584FCD7B6A5298550DFED2771
-:10CD50008978BF56779B85DE57D6FDAC546FBC4FA4
-:10CD6000399260C9A2EB48B094D3A7953D03FC4922
-:10CD7000ACAC3E226379F4E621F77DC8589F5A6334
-:10CD8000FA7B812420617BEB652C8F332560BCC747
-:10CD9000C6566E940700C6DEAC328CB7707AE7F7E1
-:10CDA000A386AB4918FFCED7655CEE98E928F5AEAF
-:10CDB000459498DA467D8BCAB3EE3685C2DFC6E568
-:10CDC00015D9CCE842837F484FA9263A72A9463A42
-:10CDD000B2C979340F57F095988F18BF6D5446A299
-:10CDE00095CECB4AEFC1B699E584697E4E0C06021A
-:10CDF000EE9C1E120E43BD4D63FC41E43EFADE364E
-:10CE00008D9074FF5798E7D7944F575F16FB7CFCC3
-:10CE1000C5CA2717EFF3EEA96C9D9FABEC3EEBAABA
-:10CE20000E46EFAE1D8CDEF12437CBD70A2CCCD6C4
-:10CE3000EDABEEE772CA0C37576FA00AE979AEFC8A
-:10CE40006A00F323EE7993D17FDBA8B75FC6F28E39
-:10CE50007B18FCFD2AC333D08B1A81A9DF7397930B
-:10CE6000E6054F29057C21FE5F35CA93A9BD4638EA
-:10CE70001698E4863F0E5CCDFC1A0FAE7708B89684
-:10CE8000015C0B2E1EAE8AC6E473EA4C76BFE2E16B
-:10CE9000510AFBBBBC1A83636A40A5F277AE7C2EB5
-:10CEA0009202EDEE0B80BC8179D60418BCDD33858F
-:10CEB0001C37C253C81701FF7C0E7FB7EA7E05FFFF
-:10CEC000BE8B53B3129F84F0FDAF00DA115D538522
-:10CED000BC192088B79400A35B01E7AEAB189CF3A4
-:10CEE000031CCE9D1C6E129110CE667A35CBE79452
-:10CEF000AF09E76E01E70C52F655E07C5F12BB3FCD
-:10CF0000D93686C1D5E61C88A09CEDF45BE9BA5EF3
-:10CF1000F02BB4BEB398D53F9CB4320BF56DA77718
-:10CF20006B16D2659BFFC62C94EF8E2C2E6748C0E3
-:10CF3000995D163D77502DEFA0F78F6EF529143FC0
-:10CF40002E5F6CF995323364A7E31459894CE1F0F4
-:10CF5000981A0B0EF652C5202F731B8DF04D32C15F
-:10CF6000D7F135E5C37F7E4DF9803947D8EEEEB174
-:10CF7000E27E862E3BD54FE5B7D0B879011F6BDB3B
-:10CF80008EFBD97BAED774EF6BF2519E38AD2AC2BF
-:10CF900033DEBC859DF338BF0FE67E7E9F4B17BF07
-:10CFA000CFE55E7E9FCB0E7E9FCB76BCCF059E9D50
-:10CFB000789FCBE5684F07E853BE278DDE3BF839F5
-:10CFC00026B0FBF1DE9C3324D6FD247ECDA8FF2EB7
-:10CFD000DB64BC9F2CBDC6A8E75203463D87FB5EC1
-:10CFE000FA7A976ABCAF2DA9D0785F9BC367BCAFB4
-:10CFF0006DCF6521D907F0FD7FB1B1C61E0080005D
-:10D00000000000001F8B080000000000000BDD7D09
-:10D0100009785445B670DDBEB73B9DA4BBD3095912
-:10D0200081849B950E84D040C0A0416F16302A8326
-:10D030009D088A8A1A013140481075CC3C9D97861C
-:10D0400004081830A0A8332E34EBE0B845272A2A6C
-:10D05000321D04069FBEA1595474D4BF757C0AC802
-:10D06000480417FC9ECBAB73AA6EF7BD371D088A28
-:10D07000FFE77BF1934ADDDACF56E79C3A55313B27
-:10D08000CB88DF4AF0E747F8C7DB4D3C76CC9A48BF
-:10D090003221D9BC6CBCF8B0355840C8B2B6EA38B9
-:10D0A0005200F594402A2D8F85429990A566777F8E
-:10D0B0000FFD1EDB366B227110B2B88910FF604283
-:10D0C0005A9BAC982E4CB7B8FD89846C7853744742
-:10D0D000D12616C5A33869FDAEF42584D0EFCB9CCC
-:10D0E00084A464D2EFCEF984641122D101049A970A
-:10D0F000DA261C2185B4C1D4B9848C09CF67599B29
-:10D10000C9ED2F22242ADEE686F14981F45190965A
-:10D1100039E97F3FD2F63FC2CF45E1348AB0725C35
-:10D12000278C236BF204C6D39737BE273CBD5353DD
-:10D130003E58B6277E028B3D8F9CF7A34853715A09
-:10D140005C8D8DA6AD09848CED39DE374DE4E99D0B
-:10D15000B90850429220AD25004F89F7B934BEDAA4
-:10D160004A6C6138ABDF173B197CA30412B1DF16A0
-:10D17000806B54382F11A274003E061645ACAFA642
-:10D180001403848C26A4ADC9BFEF6373F8BBAD84D0
-:10D19000B6B7F5AC5F298B38EF29B28CED6C929F56
-:10D1A00038693DBB9BB6D7C0C5A69CDDF8F4A7285F
-:10D1B00091AED7C1E9863C214880572BCFC70A35AD
-:10D1C00053E424C09787229BD62B56484D011B4F12
-:10D1D00051DB09904AE42357185FF0E3A4E50CA45F
-:10D1E00090D272ABBE5C4E467861BF52B8BDF2A31E
-:10D1F000D0FBBC7FA914F0F851EE69CA2DEE5AE0BD
-:10D2000027E3F77F974D2A1CBB1329DC44BEDE08B9
-:10D2100070FC772D1C451B83638B90B93548F9CD85
-:10D22000AC38DC1423A43451EE00BE6C516CC897AA
-:10D230002D891D81329A3F5964724357F6DC32E4DE
-:10D24000C796FEBB0FCD04B84EDA737823424D0962
-:10D2500054A8F0A5E5765765A042C50709E32B86DB
-:10D26000FFBE7CD8E6E0229AF6BB7C1A715252B11E
-:10D27000A5588848F1129D5B61ADB185F163815F6E
-:10D28000E8F798C4094744CAF7316E0D1EE1FF1F45
-:10D29000591EE141176F19B8E41601882235546F01
-:10D2A0002FCC47923DE1F991738F2F329002298D57
-:10D2B000A6923B15E4654F7AF732BEE7F57AE70BA5
-:10D2C000566FBC3831F5460A97D637A87C04BE7035
-:10D2D00031B960B6327CB61225F546DA55EB40C955
-:10D2E000ED857CE274941F4B52AB5B417E7E95686A
-:10D2F00022A200DF1759417EC0EFDA71933C26E28B
-:10D30000D7E027656A8C4EEEB7CAD528CF7A9B67DF
-:10D310005A8DBEFD805A7DFBF4F909BABCDA2E3A6B
-:10D32000F5B20315FDC2F96592C70A726471E26A2B
-:10D33000A14643DFF1F93507E5D1E1BC397512B6F5
-:10D340008B4A2F8A382FBF4B3904F5E9FA991CB65E
-:10D350002546943FF7F17DE87EBE0F9D699D0FF253
-:10D36000FA7FE4F51F6E72621AC267CE6C1D5E967C
-:10D370002651794DFBDB0C5534E33F23D71C07FEC8
-:10D380000BE3D914860F306DC11C13F0ABDA4F4B91
-:10D39000D274C49BBA9EDEE6D7CAE5BF5ACF2A79BB
-:10D3A00089BB00F91EE57008EEB21E5F05995C6E40
-:10D3B0006C9CAD1B7767FC84A99994EE961C14496C
-:10D3C00014CA11FDFA7AD2AB7E1D4B12D9FA7BA793
-:10D3D0006FC3BAA94408CD0BF309867C7F43FD2CAB
-:10D3E00043F91043F94843FE7C43FD3243FE524368
-:10D3F000FD6A43FE1A43FDE986F23986F20586FC92
-:10D40000BFE9EB17313CDFAE7E3B8D7C01BC1AEBF4
-:10D410004B9282F8950CF8353BF5F82D4D2F3D3F9A
-:10D4200013F7855A1D7E55FAEC2B7E96521917007C
-:10D430007E926A987E523C8768E961496216EE1FC7
-:10D44000622971B3564C4E5978B998C6C6A3FA9A58
-:10D450008E8EBAD267A1FE481E4C6072F30C742106
-:10D4600090047DB9D23F5C9E05FF9E5BBA38331DA8
-:10D47000FBF8BE7BFA79AB7277CB20CFBC4C901710
-:10D480003EAA4F0F0BC3490EE9D37430CA77EB1392
-:10D49000892F8AEE77EBBD26CC7F954A07027DA5C2
-:10D4A00062B64EFF262428403F4639B00AE4144DA8
-:10D4B000EF013945D3BB9B52315DBAC2943613FAA2
-:10D4C0009B6841FDB8DFF0255E09D2B2E27CD8BF8F
-:10D4D000EF1EB64531D1BCFD9448FCA3A8BE5078E0
-:10D4E0004D312C2776FCF4D49D30DC77749C31C010
-:10D4F0009D04958C7515C4671E4EC88A1D6997BA20
-:10D5000068BF728EE48E86B202F7422911EB79C1B0
-:10D510006C90A5EE3DD9343F28C784FA85B9B8BBD5
-:10D5200009F47775DE2B2EA5844B2B6656BA4D5E1B
-:10D530000A823B07D5DC0B701AD4464C0ACDCB5E71
-:10D540005900B9F666A68CF0DEF02265C86C18A802
-:10D550003B0DF6D9AF575816C13C7BC713114DC5CB
-:10D560003F3D55FB413DB33F7E57402ECB129210BD
-:10D570005DE57FB52B346F1359FE95CC239E459AFC
-:10D58000FCE399479C906F1B9561827564263A1461
-:10D590005F04BADA0FF298AE7BC38A5983B4FBA05A
-:10D5A000319527D27E53685AC053A0B5F300FE3C94
-:10D5B00095F9F754967F0DE046FB951B7979224B40
-:10D5C000CFF538C6FE0F643A55BDB43FB71F0B6C9C
-:10D5D000C9A7D54FF783BC32EAA754D0F5073A5F05
-:10D5E0004BED4913ED7BED0A0BF1529E5A9B4ED049
-:10D5F0004EF42EB3F836017F4872FF2B357A976FC1
-:10D6000059F23580179F40A66AE5E4FD1CCE2BB386
-:10D6100004AE671DF38A947ED7D26D13C4ED5AE22F
-:10D620008C067D24846FEF098FA2C1F78559A5ABC5
-:10D63000BC30AF996CDFCC0AC9B3BC8512ED671D55
-:10D64000F443F3EB5A4D38BFB5DB28FFD2A1BEBA85
-:10D65000EB2313E8CDC388DF04EB1B4A7C98BAC8E0
-:10D660007C1300A583EB191B39FFE651FE467B07AF
-:10D67000441F2DF70CAAF91AF8228EC89897BD4EB0
-:10D68000A4A7FA6DF16591F4039265E27626A99557
-:10D69000C6703B87C199648DEE097F33998F70BF47
-:10D6A000DDE53141B96DEB3EFF005AF4DCDB7ABABF
-:10D6B00005A8546BE44E0A1F27CEED5144DACFB6CD
-:10D6C0008C9A58685F5FFBC5EE64E8DAEBC5F6A399
-:10D6D000B29C58EF1A7FC778E866B83B5806B4305A
-:10D6E000ACB26B0790CC50651D9819C4557CCB8E9D
-:10D6F0007E32CCA326318BD6CF0B044B817C6CB50C
-:10D70000FBFCC9389F0B4D4017D9301F4E1F5548A1
-:10D710005F32D2898A6FA0872A9ABFA68EC1875AA4
-:10D7200083584E24A76EFEEB17533AB1F5A4137B32
-:10D7300016D38F866485EC2B623EBD7D35242B820B
-:10D740007DA5C2A5BAD36D067781E709E762B081EE
-:10D7500026F9BA7746D3EF8B326A4640BBA2073D23
-:10D76000CD407FB66D012FD453E1642B092802D63A
-:10D77000538A00AE6BEF2A2BC37DA19DA0BDD49B25
-:10D780009E6B2E31E9FD38A41DD791DBAED7D3298E
-:10D790001DE37EDE838EEF0AD1718CD62FA1EE3F82
-:10D7A000BE36538C0BEC0C6A7F605FBDC891CD7C9C
-:10D7B0005F52E95AFD9E4322FB19A686E19D2A9EEF
-:10D7C0001EDE5323C1DB01FC918DFC320DCA9DA4EA
-:10D7D0001BCB07DDA5E797FAAD5FEC1E40E76F2B8B
-:10D7E0009247027ED4F167717AA6743C13E9F8C1BE
-:10D7F000EEDDB0AF0DBA8BD1F13CD03592C2F478EA
-:10D80000BB4BB919C651E9CCB89E9B787F8B323C93
-:10D81000F3B0DE831DBBA2B19DA701F2B60703FEE4
-:10D82000681286EF200EDFA8DF87F0EC04F9513D87
-:10D83000D1BD0BF6678FCB391ED24972770BA81674
-:10D84000D7D68A3ABDCF885F4A5FBF877514114F1C
-:10D85000B9208036DB61C6FDB317BA09EF9B5E5570
-:10D860007EDC7506B9BD2C121EFADAFF890C4F3B1F
-:10D87000B44FA8F490D3D96D3DE6D5C77AAADF2C72
-:10D88000ACC7FA747AAC4AF7CB5BABD1DE52F1A0ED
-:10D890007E5FDC5A5D9909746E93DC91EC9FD07EBB
-:10D8A000C3E9FC514EE7ABB9FED5CEF5AF954D328D
-:10D8B000CAF7B62617A6CB9BDCDC1F5A8CE9E226FA
-:10D8C00005EB89CB4E94A2FD7E1741BFD6A2D8426C
-:10D8D00021125D657AF5FAFEA0463DDEFB55EAEDC4
-:10D8E000EF78ADBE4CFF8F2BCED295DBDD4374E5D8
-:10D8F000B1AE91BA7CB47CBEAEFE964135AF015D4F
-:10D900005912CB74F548F00B9D7EABC271BC380D3B
-:10D91000F57D0A4F660F707D562D27A48668ED149D
-:10D92000759D6D063D7639C011E1CBE0D80E70448F
-:10D93000F81673785632BB89DB3D31AADD93BF7A86
-:10D94000EAF444D4A7515E2D4CB7E0FEBC3C93E909
-:10D95000DB3DE82755233F29CF2F5DC6F673551FC2
-:10D96000DF95FE5625E8B5EB534D2827D727EE70F7
-:10D970006DC07C8C9BEDA7DE7617C59FD9C5FDD504
-:10D980009462D3E87AED9C6F969A09FABF9727D9EB
-:10D99000DCE007B3BB664DC47A867109B98568EDD2
-:10D9A0003FF271AD4EEF20D26CDD3A43F32FB2B0AF
-:10D9B0007E0422403F0905161DFEAC4493CF84F936
-:10D9C0005AC278CC84F5723C19F41CA39F421DCF37
-:10D9D0003951BFDF2CCD67EDBBD23723DE8DF0751B
-:10D9E00054E8E97739A78B96A4F5C887C6FAC6FE2E
-:10D9F00049498CCEFE5BEE3ABD9F44B5A7D57A600F
-:10DA0000473B23D437DAD1E7C25E77E278FAFD2EBE
-:10DA100082BDEECED6F893547887F0A0FA17B91DE0
-:10DA2000A6FAADD5FE24C2FAC33CFAB7BD28FF1E44
-:10DA30008875A01D9963B3F84016E6D079001DB72C
-:10DA4000FC21D6B788E657C54EEA8EA3F99C8DA275
-:10DA50008CE5360F9EDB74AD99D03F48C77D48A852
-:10DA6000199FADF1C36D8CFF6D2AD307A48F822E51
-:10DA7000607201ED5CEFAA510105F4F17CE2DE4435
-:10DA8000C00A66E52A3D116D5EEC99FF3C9BEDFBFB
-:10DA9000A9D792F91D11F0DF9CCDF6D1B01CF7C4C7
-:10DAA000A0BCE6723C87C36B537B758C568E6BBEF5
-:10DAB000C745A2AB7325BF5B407E0F8671F62BB8BE
-:10DAC0006F17112EBF9F22BF46F93D27B36621D0A5
-:10DAD0009BD978DE2705517E0F939545501E07F69A
-:10DAE0001EE0E5068A9708EB7881E3EDD78A177583
-:10DAF0005FDDD4FE2CC34B818A97952492FDFB2BCE
-:10DB0000C04B27C0BDC7BE4A82780EDB3D50790EA0
-:10DB1000F8F11959791ED2107EAE8ACC379FFEC219
-:10DB2000F87994DBADAB397EDAB97F7C25C74F1B22
-:10DB3000DFAF9773FCB4F2FD7A09E027EAECF966EF
-:10DB400050A31E3FFD2A630CF8D0E327AE588F1F69
-:10DB5000BB5B8F9F58D710033EF4F889CB91991E79
-:10DB600099AAC7530FBE3983BDE2807E22F83706DB
-:10DB7000D6044AE18CABFFD48E2E3374E2692F8534
-:10DB8000545DEFC306BB544DE372983C4C2D8F8C13
-:10DB9000F7EF38DEFF98A5FCB78E8F2F8ECCC7A687
-:10DBA0001C56FF13591172B4747559E4FA565EFF8E
-:10DBB000E020252A47D33FFDB94F3C8DBD605C7FF7
-:10DBC000ACA0C4E5E03AE4AD418AFB8D0BD939E461
-:10DBD000C668B903CEF3BD0B6DEE4D32F6E4B182EB
-:10DBE0007DC4FB21DE38EC37830F33C8B6E75B38E2
-:10DBF000F7CB9C31B0FFCDB43C7341EAD11A9AE621
-:10DC0000E464239CB26ADD3B00CEA2636A7F767E29
-:10DC10003CCDF9C9504A6AFE7EC28F60703B13FA50
-:10DC2000742E47E520EA817422BE4D944EA324222F
-:10DC3000D91360BD0AAECB0C7AAC08EB6DC77C0C77
-:10DC4000E9C0D44602ECFC9ADBA3A37332115E4E0A
-:10DC5000E2447B3581B83155F9D89A48A4A491D8CB
-:10DC60007F4BD448821BFE0560AFDA06AE5B0E36F2
-:10DC70008D42A130065905E121DCB71BD74F5C442A
-:10DC800066FEB6BB9C189FF01A5DDFD0BEAFAFAF8B
-:10DC9000F5BE8976149238421AAD2CBD23C6B11E4A
-:10DCA000D26FA2337CE0B43A3FBBE63780576F199E
-:10DCB00041FDC3FB41ACAF19273BFF3C661FF4B9E4
-:10DCC0009F2BCF513F379CA37E6A813FCED4CFDDBF
-:10DCD000F0EB5838C7F4D4C1B82DF16350EF54536A
-:10DCE000235CFD2E653EF42B590F647CDC2FACB712
-:10DCF000D9DE13506F6B11FC04FC94DE0F05D4AF1A
-:10DD00004801C3934D26AECCE1E17E6CEEF98398D9
-:10DD1000BF8BF97B16BE7FC760D0BF1F889D148C58
-:10DD2000A3ED37ECA37A1EC4D194BBDFADA5F49468
-:10DD3000D4CFE25E4FE9A71FB793A3568CD95B4BB4
-:10DD40007FFD6C30932F5B9AF6385BA840B24BEEA8
-:10DD50004B46D276367E7E4BC48941D01BED632480
-:10DD600019CE38F2457F25CC97349808F0C5437515
-:10DD7000FAF3DC2579F9D89F9A1FC0CF734991D463
-:10DD80001D8AB3A17AFCEA1C1E57E3200ED00BA516
-:10DD90001F94B848710F6AAACEAF2891EE5B71E06C
-:10DDA00017A49C42D3A2363F067F94B9FD56D06398
-:10DDB000D7F888D742E1F4D874CF6CE8AFADD81368
-:10DDC0000B7AF99A83D5970DA3F30E04253780E0DB
-:10DDD000A5C10938CF8022AE88A5DFB7BE6772C261
-:10DDE000FA36F0F66D1E01F9FFA169C4E7A5F0D877
-:10DDF00050B7C32A82DE1B30915CD473A9C135862B
-:10DE0000BB4E64F0D732BEBF6370127EEC0C2C8820
-:10DE100007B8AC8ABD30A0D0FEAB2A99DF79823832
-:10DE20007017F41B68B3207E9278FC9140AA507F53
-:10DE30004E98A6D197E9FF761E0715B88D60DC5382
-:10DE4000DC681BC6013C1764E7460F5532BFB3833D
-:10DE5000F871FC09E2B66813FDDE592939819EE2AA
-:10DE60000CFAB90DFAA324D7F920EBCF3182F5676C
-:10DE700037C44159D57939E9BC28FE44BB8478764A
-:10DE800056EAE3A71C867636C3787B01CF20970637
-:10DE9000923CC0F349CF6F471DC052B71C297EA2E8
-:10DEA000AD89042A34F116B65EFC875FE431BAB559
-:10DEB000A4EDB4C2BC4E7ADE4A0477D71BDFEFFE76
-:10DEC000F81E487FF88FCE06BAAEFFFCF6D0C6A784
-:10DED000018E8D77EF473AE476550A4C81CE67572D
-:10DEE0009505E1385A61FE0152D4B5D35C84E578DA
-:10DEF000AEB5624734960F2826BE680ACF019292CB
-:10DF00007613F06B40742F94A113C5963686B0A398
-:10DF10002A9A5F713D251C2A1F92A629229C1F8CDC
-:10DF200017DF20768AEF358A20B3F8376117F05370
-:10DF30007A85807658FA414F34D0C3C9C9268C7F80
-:10DF4000595875E525B9B4FF474A25F43754569416
-:10DF50005E0DE5030E327A71DCC6F047E1E4AFA056
-:10DF6000FC907D90F9138A48D0EDA7E503DCC49CB2
-:10DF700008FBC7340A60985F1BC70FF70F1415051D
-:10DF8000BC0054BB5B8F47A7018F46BC5A73391E38
-:10DF9000F3493EB3EB98FE58C5EBACA91885F6EBF8
-:10DFA0004332F19A87F7C4D77EAA3F2A54FF0B5019
-:10DFB000FD11D2BF53FD11D24EAA3F426A574A2FDC
-:10DFC0002BA2F30D24D17E81FF268E5E04E7038F02
-:10DFD0008CBBF9CE7FD174343F67A3949F5046E148
-:10DFE0005A0D5CCCF2AB15BA671E281275F915896B
-:10DFF000927A8EE7853DD59E66E2E73CE5F7427969
-:10E000005BAAC4CFF5583EBB80E8F29D134DBAFC25
-:10E01000053B34FD0F04FC4461BE20F7B9D55E4DCD
-:10E02000F9B23C9AA7E57BB93E5735CFE4591F8139
-:10E030007EE7E432BD4AFA8178058AAF2F7308DAA9
-:10E04000E9A24941F94DF224795384F83442A81CDD
-:10E05000D4DAD73954AE6AFC23FBF3B85FDD53CA78
-:10E06000FC6C24FCF3DD181E6745E07B5B00F48844
-:10E07000256F5FEFF693DEE5AE39553AAAA5934BCF
-:10E08000543AC825B930FE97A4646F29D059FB28AB
-:10E0900009E8A188F301E17A1CAA8A947E5E3871AE
-:10E0A000FFEB8A0C765AABB32517E37EAEC8D5F8E2
-:10E0B0001B1627CD1A05FB991AF7434885F313BAA7
-:10E0C0002EC17BA509F4B6DEF514897CA2814757E1
-:10E0D000D58438D8076C5C8E1BEB2F6EDAFA168C61
-:10E0E000BFB4A903535BA207858C55F2A2FFC6EF0C
-:10E0F000AAA985795907D2728D1CB624D2763A3BEB
-:10E100006020D3BB543C3889491BA7BAA66D644C28
-:10E110001405461BDD2F403EAF095447C3386DEE52
-:10E1200091A7F55F9D894F36541C2089148ECFBF6F
-:10E130003DE9F5C934DD07FC46F7C1E738DFA41730
-:10E140003FF3CEAD3A7E399C5066D3F2CBE1D54A4F
-:10E150008E965F58BE777E29B917CA3B53255D3E20
-:10E160001DF84593DF10E217960FF30BEDBF84CA3D
-:10E1700085372D985F9D7B78B557537E67DE613D6F
-:10E18000BF8C173DEB23E801815C26EFCF35BFDC68
-:10E19000C7F7913EF3CB3FCE8E5F9ECEE57ACECFD2
-:10E1A000E7971773937E397EF1F4915F3C3DF9E573
-:10E1B000EF3F855FDA9C7E8C076C9B6CAAF445C0B0
-:10E1C0007703978FAADF7B34F753944F53AE1E0625
-:10E1D000FA2C8F5B53E369DAA6B1FD7B61D504DCD1
-:10E1E0002F37EC63FBA5BA3FF3A35DCA4FCC8F3149
-:10E1F0003AC0F6CDA46201DB4F52049F4C7F6DA361
-:10E200002A413FD8AF4B04D22EC352E757E50A61EB
-:10E21000BD898E877AD3236E16374B0E327DC74A5F
-:10E22000FF037ABABCD8ACDB57538CFA9721AF9E68
-:10E2300063AAE7978F405C0285C7D72ADD18F65B93
-:10E24000150E6B0E96A11EF2D540CB69CFABDAF856
-:10E250007A43FA5491A734923F6C7A1E8B93B8DDBF
-:10E26000A54879A3613FBE11F75D753F37EECB9DA1
-:10E270001507F472C65BD84F2767BC85F7EAE40C34
-:10E28000CFF72A6748119687F6659E0FEDCB3C1FA6
-:10E29000DA97793E2467A0FF92F0BE3C6873E1BD37
-:10E2A0005A393307F27DD897AFCBFB65E4CC5FCE0C
-:10E2B00056CE9CE5BE5C9277CEE4CC84BC5F50CE5B
-:10E2C00054819C893BB39CA9023953A09333D7E670
-:10E2D000FD043963AFEBF2C2F9FD35BDD0BDC8F521
-:10E2E000A5D939CA0CE89F4CEC5BDCB691AEBAAA52
-:10E2F000362F4E067A71333BAFB7F6F6C6BFBCD5A4
-:10E30000A2898BB64B0176BFA2F179FC7E6DDD3E12
-:10E31000F4979D69BED3F308A6C67DB4AB6AB71562
-:10E32000E9D66DC233F19F3A8FB6C98C2FDFDCF48A
-:10E3300002EAB70F80DF2FA9A79EABE2B5AFFA8F35
-:10E3400071DC865C19D7611CFF4C744BE9F421A089
-:10E35000D393036F1B0A769E68BF2F16E0F52BD868
-:10E360000F3B7E0A9D0672193EFBB0EE977EC97583
-:10E37000FF0CFEDC0BF33ADB755F97D7E775BFF355
-:10E380004BAEFB67D80B9FFF9475CFC9256ADC0D98
-:10E39000DE9771C22F944F567F9FF721F82F56FFBB
-:10E3A00030E4195867FBB7D675E0BF20DFFD283A87
-:10E3B000B5F7A708BB3763E7EDEC1E761FC659A972
-:10E3C000B91F45C2F7A5703DE8DF0895EF8D745F72
-:10E3D000EE974E411FF9C87C9A720BF3DB19BFBF51
-:10E3E0009323B07B6C425534C4C5774DDE81F10672
-:10E3F0006D9347E2B995514F51DB753629E84F6A65
-:10E400006BF260BAB2A932007E93E70F7C20403CE9
-:10E4100058D1813ADCDF568CB97400C6F18D2B8A55
-:10E4200081FC4A839EE2E07ACA90C16FEBF48A8E47
-:10E430003FD5ADF69684FD50F784F417DA4ED6D862
-:10E4400049340FE410B29320AFB393E6A15FA11358
-:10E45000F4175AFFBCC1F356471A678589D482FE68
-:10E46000B2A2CE5419497F793727B25F81E6F1DC39
-:10E470002DDA6EF52DCA047D86D468FD6A67D25FF9
-:10E48000FE34F82CFD0A6769274D1E7C6EF4971048
-:10E49000DF72BD253E5FB91E5CB2E74A4E0CE8A3B1
-:10E4A0009C18D0534EDC3AF827C8897773587CB54E
-:10E4B0004A5F1B6437FA93DB2A09FA1FDB028BFAE7
-:10E4C00015D2FC73752622D0FCED6F32BFF09A6234
-:10E4D000E2837BB46B0612CC07DC8C0E2688B6DF99
-:10E4E000801FBCB382DA4F32F8EDAEA802D8AE8AF4
-:10E4F0009D747734A597AA628980DD34412CC1715F
-:10E50000020A8B0FADB291DF44815D354E228BCE76
-:10E51000C26F6D170B04CA91943FE578E0DBDEFC17
-:10E52000D146FF3311DF70E33D27831FFA6CFDCF27
-:10E530006B07FF6CFF33F2DF179BEBAA311EFC0C5D
-:10E54000F478DD601933C67DCAC8C72A3DF5467F19
-:10E5500036D0934669F2FC1EEEBBFC7CD9067AD21B
-:10E56000A8305D74558D898B147FA5A6B18D2FBE03
-:10E57000A5BD8F172B75607FB18DDBF0FB7D10374C
-:10E5800000EB93DC284F1F2BA37238C2FCB637CDAB
-:10E590003F08F2735B5323A61749DD6202ADFF52B9
-:10E5A00093F720C06D6B532BA6CF37B5637967D334
-:10E5B0008398DED3E4C37445D3164CEF6EEAC0F4FF
-:10E5C000B12C364E89E4C77E2E3A45FBD7D0D1B860
-:10E5D0006E3A8E06DF171CF6EACAC7065B75E5E7DA
-:10E5E0001D6AD7E547071ED4D57796F874E5B3734F
-:10E5F0006A3E01BE74146DD17DB71574E8DAF5D5A5
-:10E600002E38D7F532AC4FC1313989877B1770FF6F
-:10E610000AEE0D513E4E69A4E295E61FB5733F47E1
-:10E62000073B274F25A11FA44BBC7245EB77D95957
-:10E630001C64731A6BDFFC3B967F349D9D1FA97190
-:10E640009AA23544D744480E9FE73F6AE7F7947291
-:10E65000585C6446810F3C12240302D4E03CA48839
-:10E660009D93A9E7DECDDCEFF0A8996C15A83ED903
-:10E670002CB1F9372BC4B790D66B2E60F9872A8856
-:10E68000CF04F357A8144FD69C7337EEFE56280CD0
-:10E690009F9793210A9ED788FC9C3D74EE1DFD4FE9
-:10E6A00082E7FA1C5E8B623FC738DAF8C66E01F863
-:10E6B0002BA5B1BB0BE6F7E8EF2D72247BA8EBF797
-:10E6C0005FA701DFACFDDDD769C0EC6B43F133DD43
-:10E6D000D1DAF8990C0E97B58D5918BFB0B6D6A1FE
-:10E6E000BB07A729C77886AF6AF9FB044442BB6819
-:10E6F00080330C579F1A3F2242DC1D5D7F76F8FE67
-:10E70000E9CF8DAF59DBB880C5D70C243CBE66126B
-:10E71000DA932A1ED6423ABCE7BDDE5F3ABEE68CEB
-:10E7200071358638071DFD42DE6BA46F19F112C5E5
-:10E73000E95BB88BC545A419E8468DBB50E9528DFD
-:10E74000CF50E335D4F80D0B8FEBA0C3F2B8E6C879
-:10E75000F465D9415C70EF4D34C5B8D7679E398EEA
-:10E7600060812B8B6F0EF387B37E59FCC057839566
-:10E770005B5C49E17E07B8945B5DA3C37935DD003E
-:10E78000BF8EA55DB88315A0AFE6172BCD709F2F68
-:10E79000A188E03D9DA26201D3FC832CBFD82562F5
-:10E7A000BB7F77317F939ABF5C515E85F671867629
-:10E7B0009787DA99B1DE932EA6E73DE992D8BC7926
-:10E7C0001CF2244EDF4BC78A2C3EBA426072030E05
-:10E7D00054C7F0FD90C2EF72E29C92A3F1BB5EC100
-:10E7E000B1B5B289C5F7A9F1D07F7F53C478685B12
-:10E7F000B1A71CEE9E8D0E04FC70BE5EB491381362
-:10E8000064985F50017E5C987EFF0E888778EE12D8
-:10E8100076667BF941A62F5C517C33BE37E2F84E19
-:10E82000447FACB3C4EEF6C14013CD6CFF57E3A1F7
-:10E830008BF5FA4295415FB8FC0CEF7F24906E2F68
-:10E84000EC935B5C067F2C7F07A437F91D7E078461
-:10E85000C98722DEA7ADD8190DFEEBFC8326BCEEDE
-:10E86000296E5444BC1FDBC6E23C9E0B784E7B1FD6
-:10E87000753F876380CB89BFF338C94E2E27DEE50D
-:10E8800072E210C8099ABEC5E3240FF23849E37D4D
-:10E8900089B6A6CA035A7DC798DA05BF07E3A04622
-:10E8A0004804EFDFF5F2DE87DD4DFBD1C5312E44A4
-:10E8B000FAD9197F7F29EAA31E13EA95F7952869EB
-:10E8C00091ECBBFBA6949D36FE7065D3D4032DA7B7
-:10E8D00099A7C3A2B767D4F45B977A3FAE1DEF5BED
-:10E8E000A42826027155695619EFFFADEC52CFF7F7
-:10E8F000ADBE68585F9D8DFC5313A7D23E2DE081BD
-:10E90000F2154512DECF51FB8D2BA6F3D1FAF92B70
-:10E910003FC278E995E382A9A0CFDC37F693A9B985
-:10E92000102FB24F2440063DE6ED62FE76755D295C
-:10E93000D27C21529C7A6FEBFA90B757E3C58DF0E9
-:10E94000EF55EF808880D3DFB7B2E427F58CDFEB9B
-:10E95000C33CD16EFD76CBFCC970BFB7AFEF5FC4CF
-:10E96000723A4C9B49A2819FCE448F3673379E1BCF
-:10E97000DD3333F2B951763EC3F73D25FBD9FB2297
-:10E980000591E7D1935ED97C5648B47FDA6F7B4915
-:10E99000E4FEAFC81754BA7E07E4557BA509F50A13
-:10E9A0003B159F10176F1F47F520F0E328EC9DA241
-:10E9B0002F4BD8F98C515EF418BF84C257636F1B7C
-:10E9C000E55071BE4D671F9F1C3839CE1F89AE7848
-:10E9D000AAC25195433DE148F09CA91DE088708A88
-:10E9E000CCD7617C2D540FD16ACE705F6F5224FA60
-:10E9F000E90D0F467A5831D313E70778BDFA2D9108
-:10EA0000C1B955A2E7C7DEE06784D7F5BF30BC8C3B
-:10EA1000E517E773FF481FD7D9E77A542F726AF4D6
-:10EA200062B8142DD1FC389EBFC22B041FA2724BBA
-:10EA3000D8F637D47BC6F1F40A48E9FEB84DF0FFAA
-:10EA4000F31FB4718920A703D2AA5F1A0C1E32B239
-:10EA50004498AFD37F960BEE432FA35FA8BB1FD480
-:10EA60001B4F6A2486641FAEEB6F42B01936AC2B85
-:10EA700089B218D27AD26E8176F59D7F3B04E3D4B9
-:10EA80007746FB45704E6E351FD3FA8D666BEF8F60
-:10EA900064C22B1A1D964C3A9FB95BF4E7A4752407
-:10EAA00080FDCDEBD07F37DE1F11440A18789C2003
-:10EAB00014FF5A82F1BD249A954B439C5CCE75E7B6
-:10EAC00069DF33ABE5F0AAB5DAFCF0BE10F1E9E797
-:10EAD000297139B48BCA31EB48BC0FF3A77CBAEE6D
-:10EAE000234EABD744F5E5E4849A7A80C78D44B6CB
-:10EAF000B094E90DEABA8893E173866DB205E03B04
-:10EB0000A3D5B80EC502F3B9A9FDF4EB53F1FEFF8E
-:10EB1000F209C2BD355FC6745ECCC43D0A14170548
-:10EB200032B4EF4134C0FE00FC35BF9F8E7FDF5012
-:10EB3000E99128625FD6DF13AE39E82753E1DA3B6B
-:10EB40009DEAFD642F44B37953F8ED0539A0C28FD7
-:10EB5000483585D0AFBA9E7F8D0E6CF6C3B9AA9D9D
-:10EB6000BD03F54142CD9B00EFF443C14F043A751C
-:10EB70006293F3609D9F6F3DF29698155E1F21C1D1
-:10EB8000FB213EBA76ABE85C0EEBD9FAEA21A0F79E
-:10EB9000DED6A5C6C7527A40B8D1797D14695E9F8A
-:10EBA000FD96DC007AC978B140E747798EEF276B94
-:10EBB0000A3C87617E4507063A60BEE6AC8EDDFD05
-:10EBC000E93CBA6F1730AE36512415003F351EE1CF
-:10EBD000844D423B3B31D62B3A68BEFB46E25E0F8A
-:10EBE000D370CF7703A988E905EEE5946E926F178D
-:10EBF0003D204FDEBF6D46FC0C9A26DB67C667D30F
-:10EC0000F4A228E28DA6FD250B264F073AA1A6C740
-:10EC10004FA1F3BC2E8ACE93E6337F1BEBCFA6FC2D
-:10EC2000F6570BB102BD26C6D6AC1A0FE3C48B381B
-:10EC30009FA3544F94A81C2BBDFACB51563A5EFFAC
-:10EC4000EF6C23613E698DE5E49F1494FBF3995FBB
-:10EC5000F1B327BF1905F7C0C51F6D6EBC67CEE9BC
-:10EC60002F319BC1C388EFAD9CAEDE8B61F64E7D2C
-:10EC7000926509F8DB3FE7F60F515C682FDCC6EDC3
-:10EC800085F762981DF45E9EEA5FF22769F5DBFA6C
-:10EC90006825EE2A301EA89E04F1CE5F3A95B8781A
-:10ECA000A8473CC8B7B771BBF973422A81CE6F5BE6
-:10ECB000569E9240DB2735333818E7377808DB9FBC
-:10ECC000EB4E5182D6F8CFEA24BF05F486BA53162C
-:10ECD000DDF7F7A91EEDD5DC57BFEEF0C1F130BF6F
-:10ECE000EB497031D4BFFEB658E6B8E7FCDAC9E7A5
-:10ECF000D11B5CEAE325225178D40BC473BA7A2F76
-:10ED0000FF204684EFA421AC3CA93CF2FAC60F6177
-:10ED10007A5FF9D2890F009DD507CCA8CBDFF662C8
-:10ED200069CAE9F4E7FA5317109FC6FF572F051178
-:10ED30001EF5A72EC4EFE54B8F5980EEA11F997EDB
-:10ED4000BF2D5A49017F6D6F70DECAF5A0FA53F1ED
-:10ED5000C4DB4FFB9DF177B8FF442CFF3387DB9F6B
-:10ED6000F7982A23C5772DE0EB1E92247940EF1AFD
-:10ED7000EA27CABA08E3AAF5921322EBC5EABC3A1D
-:10ED8000CB82D7C3BCCFAB204AA4F1667238AAF3BA
-:10ED9000ED4C08CEF2207D76E7C13B13A1BCB33B1E
-:10EDA00043FB8EC4235C1E745E1ACC80FE3FBF24DE
-:10EDB000F2BD1D15CF63B8BEFCB7849A4E901FD329
-:10EDC000AEA2194A1F29D3FC26763F85F15B6FF866
-:10EDD0000EC35924BE51A783B305CBD5FE8EECE7F5
-:10EDE000FC48ED708853BF91CBFF1B37CEC5B827C9
-:10EDF000554E1D795044397504F7169AFA04D45FBC
-:10EE0000A7D7509D8ACA95599BCA77C37670632A43
-:10EE1000211726B0EF7741DA62D6F9FBD5F1661CEF
-:10EE2000F2A09E35B34DBFCFD592B62F403F38B23A
-:10EE30009FC903CADF1690C7B3EED3F753BBF1B235
-:10EE40004F617EB506BB3C99EFCF463DEFA121DC7B
-:10EE5000BF3F868C391BBBBC9E92C510DC173C2281
-:10EE6000CC63B4A47F674B4DE30A199D2CD874D2B0
-:10EE7000E2907BEFF728952339B4DF63D41E87F443
-:10EE8000C521CA934368BBE3FB185C5E1B52F30CBD
-:10EE90008C777C1F5BFF89BA13B3E09D183295E92C
-:10EEA0000D5170F980FE1A75ADD5D74CD7BB948A39
-:10EEB000A968B81714C5F411550F13C55B45072D84
-:10EEC0001FFB5F33E3619D898F5F5C09FD253D1E5C
-:10EED000AB00DC96972A2340DE2FAFB2B9E1BECA61
-:10EEE0003A4A86C5B4BD95F603FB89EFCF6377C078
-:10EEF00071644EC7AA3278F7C5B9ADCB3F80AEABCF
-:10EF0000D5C4DEC968BD90B89B4978BC866D55CF25
-:10EF1000C0BC3226D3FD41807BF4CA08A7A67FC2BD
-:10EF2000F5AB7A8E93E3AF0CBEE702B897B04744D7
-:10EF3000F5F1445D16DAF54308A32735FE1EC60633
-:10EF40003D5285DF31BA5F114D9CDA900EC16FA63C
-:10EF5000EB9AD7F90CBEC751B7C89F7C2DECB78F81
-:10EF6000496C1FE5F34BFC6B5A99EC08EFBFD70ACD
-:10EF70004ED423553DF96AA2FE14A0BF702AE78340
-:10EF8000ABB97E7C6D2C83F374E2CE8076D7588942
-:10EF9000C34461766D79C7E8F9B0EFCE35C7837E9B
-:10EFA000036B8984773535EA412A1FD66FB67BC15A
-:10EFB000EFFAB9D09D079D1C35333EEB7E25CAB7CD
-:10EFC0003E33427F7CFFAACFE37A5D0E51E0FE40E4
-:10EFD000FDF6C1781F2C2A86E27124CA3F2BE0750A
-:10EFE00017ECFF74DDB35F8EF6E3BD30F5BD32275D
-:10EFF000F1DAE9380DDB53D6839E9198AD8C5840F9
-:10F00000FBFBDC1CCC407941E59B40F7D6D4A14BFF
-:10F01000A64894AFEAFB53BD8BE6C73F7EEF148949
-:10F02000D2637D56709689E6E73DFE04CB0F097EDC
-:10F0300002F93B1E7F81D51F199C25D2FCEAC777B8
-:10F04000B17238C3A684B5F6F137A680FD7F349E31
-:10F05000E90FC41DBC1EE8A7FEA5C1A6E59AF5DE12
-:10F060003D94C9D1A3D1ACDED14C724335C0DB1580
-:10F07000CCABD69CCB350C0DF96F589C165FA7DA3C
-:10F080008EA446EE7F306F37BB9CD5BB2896B44626
-:10F09000B3FB755ED0C7766E1B8C70B10D4DE0F082
-:10F0A000A2FD1485FB51E1A8F6A78E3B07F67590EB
-:10F0B000FB662AF73572A66828C31B1DA705C7295A
-:10F0C0005046C03B56F5D5034700DE28BE248E2FA0
-:10F0D000C98A8FABAD63F3A3FDC617E23E330AFCCA
-:10F0E000CA3BBFA3F533C3F336D287C2C799DDCC81
-:10F0F000EEF777C767231D5D14CBF4455244E14713
-:10F10000E5D9EAA16CFFB97B683C5B5F080F290277
-:10F11000F6DFCCE13790D53FDBF556FF42EBD5E08B
-:10F120004901FFCACEADF98827753D84ACD2F5738D
-:10F1300074A1A15D31653C98474236B65B1A4DAC6F
-:10F14000F89DAC0FB5CBA4ED2E2AEF1E05FC308F39
-:10F15000EBC3C47B21C635D4716931AF356001BFC3
-:10F16000F4BC0EE6272739747D401FD5138BF8FABF
-:10F170009C7C7D4EB63E9F8E3EC9C1EE8CC9F69EEC
-:10F18000741B827BA8BF8291BC3F1D3F47EA0FF8EA
-:10F19000A2377CB40C65FBD439C3873A4F033C4398
-:10F1A0007036CC4F8527F031B62BD0F3933ACF3B56
-:10F1B0007AE3E7CC9F385E296B37EF77148FA0FF97
-:10F1C000C87A7A9ED799699A5E106ED7DAB1D00361
-:10F1D000723E5690991FBCB3CA0BFB5FC3B652F484
-:10F1E00053CD7BE1C9E7BDB4FD9CA7D73820B8EA71
-:10F1F00088D49E0C7A70DDA6C50E781FEEB0E4753B
-:10F2000080FC3CE21323FA07FFC1F1A0EA5DF57C24
-:10F21000BF39FAE7BB27013CBEDE64C67B860D5BC7
-:10F22000A2FC51E837998DFA18CD7FC8F24BBF0088
-:10F230003BB661AB5E7F9AF3A735C9E80F23DE01C9
-:10F24000263C04F30F80C3B0FA8D663C4FA93F28DB
-:10F25000BAE930A481742F81F919DBC33C4E51BC4B
-:10F2600037748837427C9FB19C4A12D4C71A3AEF50
-:10F27000463DADA1F3924F41AF6830C453D4F6A2DE
-:10F2800087BD3194EB61FC9D74153EC49784FA4DA3
-:10F29000F3630F147E48E7756CE3EB0EA140BB6F80
-:10F2A0002E423C9DE898B1F625B9F7FDF573D00FD5
-:10F2B000A2B4ED187EE5AD023B18DAC6D23AB3DF50
-:10F2C00001FE81BA756637DD8149DD931B36FF117A
-:10F2D000ECCB77A2DC106A3AF7C95D6F9D4FF373F0
-:10F2E0009F31274E64D3B7C139B78A2788D9003DEB
-:10F2F00045C5CB9CBFECB2C8C3D877D07B55FCCCFE
-:10F300007DA6CB02F7FC8C702CEFE8B2603CAC1110
-:10F310004F1D1F4E0015A4F9B16F2C40DF47B60BEF
-:10F32000F8EEBDB17DEDBA5D0EA0438013D8A12AE1
-:10F33000BE42F8EB8137FFA4978AB01EFA43CE8411
-:10F34000BF270047A391CE9F7A09FC28EF46B90159
-:10F350000EB54FDDEA80F57C2ACD67F4FEC8E26485
-:10F36000782FAFD6EC4D7662CABED73E7A3BD2E15B
-:10F37000CDFB6E4F66EF482869EC1D4D6F1AACF35C
-:10F38000A687A7E03A67911AA4C3DA47987FE32BD0
-:10F3900089543E13815FA614B07DE4D3F551101C4F
-:10F3A000443E8573043837D92FE2BDFB1EEF22910E
-:10F3B0000598FF8AFB17F20B42EF1F5A41BF6BE023
-:10F3C000B51A362E0D009E8EA62B29E0B7A570F03B
-:10F3D00072B809F0EEBBB86F7C0AC31391E13C042C
-:10F3E000DB517DBC1CBE43FD8059892ED4B5E3EFB3
-:10F3F000DBB0F155FF069D770C9CA77F9ACCE2F21B
-:10F400008CEB6BE1EBA33F01A2A5B3DEF87FE33207
-:10F41000A4AF2F0F32FEA9F755556279C0EC4F818A
-:10F42000725FD76401E54394EEFC3C441F1BCD9C06
-:10F43000BFF5E5749E92A085EF7601DFD354E965B0
-:10F44000D67D51BAF3FA30FDE8DF8B52F955B5B3EA
-:10F450006EE6F2C0B86EA37CF01418FE8EC2C349EB
-:10F460007DF27FD7997D9BFF08FC4CF9D72B033F9A
-:10F470009BD13FF0D913AFBE750DA5FBCF3A543EDB
-:10F48000D6CB5B231FD73E3B9A44E2E3CF6C6E1290
-:10F49000918FE9F7887C6C63F7A6FF7FC9DB9B7BC4
-:10F4A00091B7FF56A097B75F9182B80B08EC337302
-:10F4B000F1BD57237C55BBD72847130AE4887294C3
-:10F4C000FE1C241A78AA7054E973CEE3F3709C10E2
-:10F4D0001DAB74AAD271884E8DEBD6C3D3587E2152
-:10F4E000CC5D1307615E44ED18D0735F117DEBE9CD
-:10F4F000D48ED3B92CA1F03FFE4426C61B2DE67650
-:10F50000C07167B703E2C71673BBA31BFC9271E11E
-:10F51000EFDDD14C5F3AEEE976C46BF4A60FB78904
-:10F520000ED0F3823E5219C99F442536CE23487A25
-:10F530002B67E762C7B93FF438F7778E176D198DDF
-:10F54000E0076E677FF764E6C2AB1C702E707C5BD1
-:10F55000F63DC07F37BD26B2773DBD8A04711233B8
-:10F560001808C861E2BDBF84AE73C6B6B918DF60C3
-:10F57000F4A3CCB26DC4F385AFC85D981AFD2773B0
-:10F58000C0CF02F4FEB0E1FBB6CB90BEE618E8AB0C
-:10F5900006E82BAD277DED56F9750419A1BD7FB6A0
-:10F5A00080CBBDF162C13DA0CF1CA7763EC61288BC
-:10F5B000057B61DFFD0AEC7E600C6F12D2EDDC9AF8
-:10F5C000C316FE8E33D2BB4A87467BDF981E7BEE86
-:10F5D000FD3177D22A75CFFFA3F0219A1E7BFE9DC5
-:10F5E000BC9721FFC2DB19FF203DEB976FFF16EDA3
-:10F5F0009BE3DBA3703EC7B7FF2DE34EC8BF148566
-:10F60000E7AFC71745615C9477BBDD07F7F98EA7B5
-:10F6100033BF5DF32BDF1462FC0569617A48818595
-:10F62000A5DBFEFB03889F3EB12D4A063F45C3F68E
-:10F6300058B4DB1B5E8AC6B897E3AF7C3346EB67F2
-:10F64000FAB9EBA9E7E7FCC7ED64EAB340CFF1CC28
-:10F65000BE6B7879EC0688979BD7D96581F381F2E8
-:10F66000BF7E5F0872E9F8B34CFFA0F6FCA3F0D2AE
-:10F67000E1F70575F79B29BC3F071D91DAE17F187B
-:10F68000F6E4956087F7840B83C3710A07581785E2
-:10F690004B2DC8D3DEE09138ECD70A8F2FD0BEA80F
-:10F6A000DB761EF251182E82C2BEDB7D5601D7CF0B
-:10F6B000BE6FFFA610F4A9CF3A16A25E70A6758F92
-:10F6C000FA3FB76EC1DF977557C3BA937E8DEB666D
-:10F6D000F47F88EF57463EE849E72FFC16F34FD9F1
-:10F6E000DD38DF3EF2FF82FF6B787F56C073F9335F
-:10F6F000E17DD5FF5ABCBFC6F16E77427CD9F15788
-:10F70000BECF209AF59F69DD1DFF4BD71DD28F44D8
-:10F710008F159EB86F23FE00DC5F5FDC8B9EF2FED0
-:10F7200030D52FC1EC10357E474C9C837A8698B833
-:10F730001CF586C584BD83EC954DFC3D3616F7DD82
-:10F740003AD0ED43BFA8E4A95D47F3E64175EEE585
-:10F75000D883DE3E13932756829FA579219D17ED0E
-:10F76000A739C9E46C96E19976933FAA10D30F218B
-:10F770005D9A7CE91E1857B2E9DFABB519EC8D989C
-:10F780001C8B3EAE98EC70C27975B45B82B7DCA975
-:10F790002AAB7FDFF6E5612CFE2386F8306EF36C32
-:10F7A000E1642FD4DB6B463819E1A3C2AD079CB8E6
-:10F7B0003DAABEC72F252E0F001F4A84DA936C3D49
-:10F7C0006887C2DF9182F31A73DC2CF772769E226F
-:10F7D00087DEF18738086E6F86DE99954D6897AAA7
-:10F7E00070D6F487EB37C2F96CE1ABE2259A54236B
-:10F7F0009EA307DADC3E3AFFC53283FB620A7778C4
-:10F800005F5C85AF0A37231E8240A34961F88753A6
-:10F810007DBC8EB78CB8E09C65BC5812F482BE5C8F
-:10F820001C8BFAF23181F8056ABF1D2B4D2E03BBEC
-:10F83000E258BA4582745C375D9366BE179DB28606
-:10F84000FE861EE44B49BC2E7F2C3D0FDB975BD31D
-:10F8500074EDF642DC36B5DB8FA5155BF13CD4992F
-:10F86000A96B3729D6B11ECAF7421C378E3F01ED6E
-:10F870009B8B53F375FD4CFAE8D8C337D2742BB782
-:10F88000ABBBC799D11F7FECB5696500C74BE411CD
-:10F89000BAFAFB883309888AAEAF02D677996BAC87
-:10F8A0006EDCBA0F77E4811FE237EE52DDF7CB8BC7
-:10F8B0002FD1F5E3B106FD40DE554A95EE7B5DE3C1
-:10F8C000D744EA47C8058DDF11691455DFFD1DBA1D
-:10F8D0007E46EDD9AAABEF0E38CB41651C79C8FD49
-:10F8E0002AA46A3CBBA59FD56BA2E9B00FCB4438D4
-:10F8F000F71CFD714D33B8A12F38465C4007E791E6
-:10F90000183C0FEC2DEEFD1B93AF06D67987E873FC
-:10F91000411A33605621ACEB486A9B08C7D20F09E5
-:10F92000355714523E1BFBA5AF19F2177DD7218224
-:10F930003DD9BC45C4FB75E3C589B1FF09F2B843A5
-:10F94000C018FF3A9B09FDF09F257414DEAAA13B65
-:10F95000356EC7C8C7FD4795DE5448E9AD255569E2
-:10F96000EF02795AF6FEF56284FBAEC4A97F97AE2A
-:10F97000FF284F2B9CD3AB714931E5220B6EBFD8CA
-:10F980008CFE9225267734170AB8EF3A2798D701CC
-:10F99000BF7FCFE546CCEB44067F504CBF1A11EE3B
-:10F9A000D9917B048C6B51C79B51CCE2ED9714AA83
-:10F9B000EF9B3893AE1B06EDED2C5E007C69D06E9C
-:10F9C000A209F594AE719FA2FD1B73B9291DEEE14A
-:10F9D000398A95D773687E4C607F3ADA59A418E368
-:10F9E0006D16F0389994B6CC077640FB3D668C3B9B
-:10F9F0009E314D399943F32B27B2FB819DC565B1EB
-:10FA0000C334F0739C1288AC892BF8BE50C6793889
-:10FA1000A420DE0F739C92B09C044730FB8F8FE3D1
-:10FA20009826BF7DAB661C22297361DECB87BC277D
-:10FA3000831C731C22FCEF8804F1EFE4413C123E6E
-:10FA400080260553AF8B70EFEEE896D1F16087F713
-:10FA50002B75E33DC17E4F8AA17BB2201657C23F72
-:10FA6000788FB6FAED0A5ABE0564232BF7134ACFF6
-:10FA7000CB2D6A39152D2EFECE2196575F55017874
-:10FA800014F5F5876785EA2BD6D470FFCF1456BFDF
-:10FA9000DD52D013AE5DE3A2707F8EA17400FAE553
-:10FAA00082FC8294D3C5E93B4EC59E01AE0E06D7BB
-:10FAB000EFE82E901CF6277E2CC819405FF7C2F5A0
-:10FAC000006A37AF8EAFD90A741C23FA87C1F7E9F1
-:10FAD0000E25651CA5B74E8B92F13BF48B4463BC9D
-:10FAE00057D52D9F3D0857C41C938EBAA866433A3C
-:10FAF00025257624F8A59C5FA31C50E3DAC270A4E8
-:10FB0000F44BC75C690AE7412E38C27055E06DE0DE
-:10FB1000E51A385B69BE8AC3F5E45333AF4238CD8A
-:10FB2000B4225DDCCA79A8259EB4435CDD49E7E6D2
-:10FB30002B811E4E6E3163F06A2714C2BEE9B2B249
-:10FB4000BFE393184C85BFDB326C9F09FD79EF5101
-:10FB5000FA50803EFC2310EE6A7F274BDE4E80FB7E
-:10FB6000122713A50480CF9CA005E1769D44FCF0EC
-:10FB70005E6A67E2CCF2525ADE7948C6F20EDECFF8
-:10FB80009051CAFB85B88FF3FBBECAF922BC8FDA4D
-:10FB90001BBE8CE7F7E00F3E3FA1773A6829B5E23C
-:10FBA0007B430DC50B0B605F58109F87F1570D15F8
-:10FBB00002EEBB0D8D5F22DCD5FEA553229135717F
-:10FBC000524F80F73049F36EFC290B96D7359E448F
-:10FBD000F94DA793097C738C9F6FB69BC90D553463
-:10FBE000ADFB41BCA1CA86E794ADB07FD4911D9610
-:10FBF000051AF9473ABE08C9FBE11477F74EDC1F36
-:10FC00000372B54A704E8147062EEDF05F05E7F7A7
-:10FC100055D1CE2970DE9FE4FEF355707E5F95EEE0
-:10FC20009C02E7FBB94FC74EC5F234E71AF84BA068
-:10FC3000D5EE5C96CF74BE09F90B8797B1BC9DD108
-:10FC400041CCD31953BDB87FDB102E275A637DA753
-:10FC50007B77E4E6C6977570E9512E0A180785810F
-:10FC60001A947EFEB56C007B073727807159E9C373
-:10FC70000535FE8B142784E37513B38902E7A98940
-:10FC80002F44B3775A3F0E6400FC6E7E21DA0F7E5C
-:10FC9000C8798FBC6A81FD67BA28E7015F8D1F5D57
-:10FCA000933D3C09FC2501CCDFDCB81DE775E74836
-:10FCB000FEF7AC9CDD05E0AFAAE571CEB58678DF36
-:10FCC00039B69DE87F9BB351EF679B4B821F009F26
-:10FCD000D63D71FA38DF8F4C6C1E1287C7743170B5
-:10FCE000BD85CD6BCC70389F49E8C23863C91948CF
-:10FCF000AE41F8D6B9D03E498DC17B344BFABF5BDB
-:10FD000018E97D988E26BADF53967BB6692BA6D26A
-:10FD10000882EB4991821637EDA79ECBE531818FA2
-:10FD20002CDA78C12B385CE3B6B2F36E631CEC15A9
-:10FD3000C3ED3CBE9D9D2BCFAB7EA304F0A2E2F3AE
-:10FD4000A258D281F1AA09C4CDF1E206BCA8F00FF5
-:10FD50009F2FD3769991E842853F61F175314C5ED2
-:10FD6000743F178DFA9471FE757CBEEA3ABCC39954
-:10FD70007DD3DBFCBD30FFA4733F7FEF7059F7DE0E
-:10FD8000ADBA0E958F43F6E0C2C87A8A3AEFB3A7B0
-:10FD9000B380A52F74A6CA997A52E3423F2C972BC1
-:10FDA0002A9CD579AAF0EAEC25BE556A7C51B71E8B
-:10FDB00029508697E31F19CEEE374A1D9760889524
-:10FDC000D4B80DEB9DED7A5479DBDBBA54396B5C1A
-:10FDD0009F2A6FD575AA72575DEF382A48501EC208
-:10FDE0005B0F02D80B353AFDB7146E2868CF7DAC97
-:10FDF000B7E8F2E39DBFD3D5BF3875A1AEFC127949
-:10FE000099AEFC32D72A5DFE37EE3F18F4F875BA8A
-:10FE1000F22AE5315D794930500E7AF6DF9B2A31BE
-:10FE20007EFBC2C3DDAF42DEDFE4C4FC8EA6544CD1
-:10FE30007736C9C8DFBB9B5C98EE6972E3F7FF6851
-:10FE40002AC6F48D2605D340930753A35C98F497F4
-:10FE5000AB24D0D38B03EDA8FF678DA83906F270D1
-:10FE6000AFC9D76CA7703AEF3DA68F139F713FFEC5
-:10FE7000E6833B615F77B27B4D2D5D630539823E42
-:10FE8000E7A0FB9DA2A117C7C42081F36407891CCA
-:10FE900067F9C570768E8BF1799436A75AD93BB63F
-:10FEA00053A70A188F3895B0FB0934F5D7D0F2491B
-:10FEB00012F1C2FE5F6593F0FC89F0FBC253D834A7
-:10FEC000E13D756F14ECDF89FDF07ED264F848E700
-:10FED0002B2A22C6B14E297E1DE3FFAEB1B1BF93DE
-:10FEE00075F59E45FFBA93969316EF6876FF417DB0
-:10FEF00027E45DD3D9E80D5FC09D02380F12DCEC1A
-:10FF0000EFA4C44B6EADFEAFA6BB8633FD7F52336C
-:10FF1000BF1FB08FA01EA7F2235D5F2BCC5FE58BC8
-:10FF20002AA7E41FEC80FD7E5539D4AF3B28235C23
-:10FF300054BE50F940B5FF543E182F3ED10CF54F3A
-:10FF40001C62EF929D77ACE6F05FE838FF03F207A2
-:10FF5000233E0080000000001F8B0800000000000E
-:10FF6000000BB53A09705455B6E7F5EB2DA4937420
-:10FF7000428084CD0E110C64EB74D210B6E1911066
-:10FF8000DC101BD42F20420332614D62C02F8EFE45
-:10FF9000EAC63018F8D69F8C5A7EFDA2D53082CCA6
-:10FFA00068151948303343B0418D30E348545090C0
-:10FFB000882D322CDF848E2C223354F9CF39F73D33
-:10FFC000BA5F2761B1BE49A54EEEF2EE3DFBF61ECB
-:10FFD0005CF95182BE002BAD00E00028EEAC2B4D49
-:10FFE000C27F0B82F560A439FCF911FF0AF7358155
-:10FFF000312B321EF343FDBBB46FB7CF0B4613C09A
-:020000021000EC
-:100000002EDF0C8641DF22300E05D8EBABE2F17B10
-:10001000BE553C6EF1F919EEF3D532FCABAF8ED77D
-:100020003FF4BDC4E38F7C0186ADBEAD3CFF96D3EB
-:100030000ED007E0426B693F6F0E409A3A06EBC460
-:10004000344F0242A38033082117422B9852531198
-:10005000CE909C35C0F37E486118F4E2FAB2B4BF8A
-:1000600080B137A3EFB122BD0F80FA93DADB08230A
-:1000700001EE0741FF03C57FBB2C25D2C09B251590
-:1000800001CC4AEB05EB258087C09F3B0FE18CF24A
-:100090003AD35889D627D94F223F24FF17861FB35A
-:1000A0009127F433A12B4444E1A4C6371960896D2C
-:1000B0008D19860020978E8790BF0690E0C70C8030
-:1000C000C5103403ADBF6E3A1E8AE2F352800CC8ED
-:1000D00044FCDF32F17E6D1EE8F9A873E552198AFF
-:1000E00053886F0EE6D37208F17916F95167958D32
-:1000F000EEAB33D339B1F72EB1BD67C64137F7B692
-:10010000F2F3D7BB57935305C03CDABF264DA9DBAA
-:1001100083E72EEFD536473674C30FBBB1F3EA79C8
-:10012000C887DAE1F8BC1BF14F9864F5229E65B2EE
-:100130000D0C28C770400E58F09C45197589742E17
-:100140002A6622E0FCE26699E50146C5988E722B8C
-:1001500057E5D60EC1CF482EE5E3CAA700CA6FD136
-:10016000063D3D4B6C2798EF176157B7F456C0B367
-:10017000DFC9895DE9AD1877FB293AAF42E51BCFAE
-:10018000235EABDAA46DEF45ED5BEA4C483D198F79
-:10019000FF8C8251C417A4C31944FD397750765A95
-:1001A000A067FD38EB03D6F74B3ED8F61EEAFFD921
-:1001B0002B38D11FEDD159F2927FDCCF273763A1C5
-:1001C00067B593EC09F584EC4893E35AD42140BC1D
-:1001D000D79658037EE467D86D37D2FD61295093D6
-:1001E0004872B90CCED5C8EF89BB3E384C7632D1B7
-:1001F0006A0B12DF9088F668B94E6817D3E34F0494
-:100200006A1270FFD836BF4C663BFAA0B7C686E3C9
-:10021000511F2A2869F433EF796492FB765F13F358
-:10022000A1DE57CF30623FB7B29D413ACE65DEB80E
-:100230009DC1235603F9B5152A4E35C9506740872D
-:1002400075DE36594E403ACE07C149F305071D35D4
-:100250008457619B2227225EEE13DE1AC27B2D8A11
-:100260004141C18D6AF7CB49386F3142D0827EC49B
-:10027000926600258AAFA32F046AC80F6A7EEDED4F
-:1002800038C1C70957EA65F25B76B377EB46E427D6
-:10029000FC39CEB9D9D115EF1D4E03EBFFB114CF08
-:1002A0000E9687CD31CC934BFAD3BEE515D29F86FF
-:1002B00078A7059F83183FADF945ED1C8D6F1A1F78
-:1002C0002BEDE751C6A807ABCEB3DF8BBDB7D2008D
-:1002D000DE7AE4BBABD451588DE7B4AF86B9D370A6
-:1002E0005C674298D375FFBBAE9216C2AF4C1ED767
-:1002F000AA105E76C335F5BA72D5777C7F8FEBEAAC
-:10030000FD95CD6EFB7C5B64DE5820093F0F46FBFC
-:10031000496B449E372AF7F19D3374716BC20F5EAF
-:100320005DDC9A889E367ABDD4FAA86E5C667F4200
-:10033000B7FFF6B4D5BAF53B1DEB74EB7767FD5606
-:1003400037BEC7F9B26EFFBDC51B75EBD394DFEBAB
-:10035000D6A7CAA0486873B952C044763613EA19C2
-:10036000CE86568673A093A1173589E07C70327CC7
-:10037000043C0CE7B8BCFF22B9844D9D7DC9EE3B1F
-:1003800076FE2B87F4A2E31763ED198E485CD6E264
-:10039000F4CDC6E35E66945337FA905860603969CD
-:1003A000FEBE47F9C4F8FB7001FA13C473BDA17314
-:1003B000CE5F508FFCBB2DF6CD51FE0435D240F1FF
-:1003C00058B3DB9EFC4B99115301B4C7AD06E781CE
-:1003D0001574CE47BDA13BFBD2E0D41F90D1A88FAE
-:1003E00049B343C621A86F1753144701E2EF7F6654
-:1003F0005CF2C96CD5BFDC8272F8DAC0FE0F164B16
-:1004000081A14857538318E72E4C0E489C07045986
-:100410001E0F43C84474CC05607F3B0F1C0C178033
-:10042000C272C193E3F3D0CF2C6C30BAD6235EF9FD
-:10043000299D43C8CE72471F4991F0FE3C742FA4FA
-:10044000FFF906A8A53C45C3734181F0074F162864
-:1004500045056E7AAE75FDF3787F67A30136E13905
-:10046000A7463FF14B888AAB2FBB4A46D3BE6D12DD
-:1004700028141FFDCD96C0E60CBABFB32FF9756DD9
-:10048000DF1C57E904DA37B900F87CA87F0788CF6A
-:10049000D3EC82A730A90FF3009F1B4CFEA7AB9DA6
-:1004A000F959DEF9141FFA839828E67B79FC60C1BC
-:1004B000E6196B72981E3FE5632FBBBC1EC6DF8C2E
-:1004C0002E8DF07FD512D8C47953D56009F12C7FD9
-:1004D000CD62A0387E04FD2CDC0670D46765F8A5DB
-:1004E000CFCEF02B5F1AC3AF7D0E86DFF8B2182E89
-:1004F000FC010940391E2E50E692FC7AA2A3677FC8
-:1005000021E8084B30A3DED6757D86AAD7790D2762
-:100510009E8E273D68929D431185DC465438C4FB6E
-:10052000ECAE510139239AAFDE6584475ED3A7CF85
-:100530008D2DA2E78C7609F79F6D3ADF97EC301688
-:10054000BFABFC68360B7EA8F86E4B6E5D4FCF6F6D
-:100550006B1C4218A23F00A187244FA93B3A56B317
-:100560001CF30B44BCB9D7D25964B745E8034A150C
-:10057000305E54ABF1A24CBE9218427CA6D1B9A316
-:1005800049AF6F3D40F7F9F7C93094F513E67AA209
-:10059000ECFC75950F1ACC6D367B0278FEB6E6CF73
-:1005A000A6DF8D7C983AE64EB71C656F2F10136856
-:1005B000DFE8CBFFF37C2AEFB7D355336163991D96
-:1005C000F73D64DDF33EB1E061FBD765C9389E9B22
-:1005D00026B5109CE7C8989CE22074034CCF82ACEF
-:1005E000892DA462539CD3CC94174C24A38AF29FE8
-:1005F000A5564CB274FEBAB76E7C7BDA00DDFE3BCA
-:100600001D99BAF5BBB3B275EBDABD539C85BA7DC3
-:1006100064AF9437231D2C77D82C07864AA407177C
-:10062000BE58CAF4CF2C22FAC3C83F332600A78B8A
-:10063000D7BDF83CB98DC6BD89649FB1F9E9B2E672
-:10064000DFB5288E9EF3D30AF02405A59EF3D29E33
-:10065000F2BA1BCD4FD18F3C477E247FE7FDF61ABF
-:10066000C463DBE8CBFD1D48DFDE02CC5BC9FFC500
-:10067000E4AD61356F8DD5A3ABFA2A3984FEEC97D2
-:10068000D9EF6AF96BAC1E013C2DFC8D0A6FD6DEEA
-:10069000A77E22E2CF3FC8EE7B47EBB70A0305BA3D
-:1006A00078916FC67880F2E9FCBB0C9B68E20AE2A5
-:1006B000A1C92133A2FFF0C8C6F7D38B78DE4FF96A
-:1006C0006905C5073CFF0AE51F84EFB23DEFA7A708
-:1006D00046D661E5D7BAFDF094D4A21BAFC9D08F3E
-:1006E0009F9DD812FD7C4FFEA87CC3A3662FFAE91C
-:1006F000F2172425D08D3FD2F029DB1BA790DF34E1
-:10070000EEB2705D54615740B151F68371A49BF80D
-:10071000ACF98799325475E7E72C2E91674DD91BB8
-:1007200007F24F38F708EA0AE1E37F5BC49B2349ED
-:100730000A78A2EE497109BC3B92EBFEE37BDCD761
-:10074000F1277012EB3B9285DFCD6B38653050FCA2
-:10075000EB25F425CF1E32A4200C2F8AF703DA53A1
-:10076000E5E204BF211FD787747E6645D1F7DF9E7F
-:10077000FCB215E5F685C1A08B3F61F27938CE74E5
-:1007800025CF5C83FFDFBD372E68F809F46462CCA7
-:10079000627F5A22EC7E0EE98DB84701743995BF0D
-:1007A00006ED5E85FC04D14FE3D9DB538FBC407965
-:1007B000EC7EE10770D9165B973E145597C206612F
-:1007C000BF56FCA53CA60202936D54FF07D1FEE183
-:1007D000E7B3FF092E5BC4CE6FEB6AD79ADD571ED5
-:1007E00012767F6ED7C54FC8CF9FC3F8176DF71A23
-:1007F000DF347BAF7C4966BBD4E6CFEE92EF087462
-:10080000C3E7E1AABE81E2647BADB68B7BABC75F79
-:100810009A4E71AEBA19252475BD478395B5323805
-:10082000A2EED9B6DBB228608BD011D6E26BF3C54D
-:1008300094893902AEA6F80B75AAFF11790DC65539
-:10084000532AC5D5699273338243CDFD4A887F8789
-:1008500024083A5C7CC4FD56C4EF3E711CCDDB28F5
-:100860003F83B42C23DD335D95EB7D6A9FE881E601
-:10087000078692BFFFAC61FE21059756B83299CE2C
-:1008800007C1CFF9E1A164CFA01588E7D41AA1E789
-:1008900087923BDBA9AF74687CBC5423F1F96BA24F
-:1008A000F3BF4326CFA02AA64BED2F2923E41FE355
-:1008B0006FA2EE55FD22CAD32F893A8DEDC098FE66
-:1008C0002CF70B1643A045C17B2B9C41CE5397823E
-:1008D000A8EF63F3F48A71DF9A293EC4D695139B7F
-:1008E000F61C96F2BAE947C4E8EDF5FA0FB1F56CDB
-:1008F0004F79FEC514CF8BAEA83E606CBE7E352FFF
-:10090000D5F2AACDF1814D88CFBBE3FFFBEC521CA1
-:10091000AFDC1C6FA7FAF9CC6B163FF9E7339B2CC1
-:100920000109D7CFA474B651DD70667BAE134F803A
-:100930007283E3CDB728CEFFC1C47A01E014F6710B
-:10094000554F1F3F46FEAE7A738204945F7BC5BA53
-:1009500056CBC96F24709EB078477AC02245E20C0E
-:10096000D98703538BD3AFC62994F49FD9775F12ED
-:10097000F5A1DA0D7F1CCC7D2DF9A9634FE0734BF7
-:10098000B724B8289F801C60B92DDA347C23E5C7D2
-:100990002F9ABC4D447FE91BF7F4CBA0F33FED0346
-:1009A000444F78D78EBE941F45F2F6EEF3BD73BB6D
-:1009B00032932027C227AD2F58FBFA6A0FC93D5E3C
-:1009C00072F0BC11AA9401A4174DD380CE75C992C0
-:1009D0004276D9B92E9EF3D458BD3BE01275CA3287
-:1009E000AD8FD01BAC69643F5E603E84D7656F5AA3
-:1009F0008F7C3AE54A51E375E7B0E9B9D1FAD956A7
-:100A000041F5DFB90D16EE6FB4C7E9F3060D1E759B
-:100A100025F3FE72EB055D3FA162D565FD38071435
-:100A2000F23BAE1A47E1A30857A8FCEF18E139E6FC
-:100A3000423C97D4FF76E787CC970DFFFE05DDBBE0
-:100A4000CF26FA2A1F0AFEC5D603E556D1BF00D825
-:100A5000C8F76BF3A75EFD3C8FF4F05463F6309259
-:100A6000E37CB9F5E42B48E7D984D6634F22DCBE9A
-:100A7000EF13964B2CBEB17D987649627A97111D83
-:100A8000385FE6F65C2039A320B88E9BBF3E97F90D
-:100A90005726E724911CC367BAAF57343CB5F335EA
-:100AA000FCB4F3B57D52A190578BDAE7EB30B79EDB
-:100AB00025F976ECCC96A8CF77753EA5352F394A27
-:100AC0005F7EAEFEFA2CB5CF71D8B0FA3133EA634F
-:100AD0007BFDF3266FB4DFBBC9BEFAD57C5001871E
-:100AE000BDAF08251CB79038238EC76B6332061C38
-:100AF0008F53D193081FB4CBF12A8425DE34EE9BAB
-:100B0000D37908E320C0E39A894E07C1099287FB95
-:100B1000175ADD3019AA06121D066B88FB7D6BA8DB
-:100B2000CF8879CB03C96BEFC9C0FBD6F481B594EC
-:100B3000CFAC3109BBF0CF8BE77A4EE3931667C099
-:100B40009EA38B2F6BECE030E239338C506B4A1153
-:100B5000FB6E413E1FDA37FF7DEA9F7E6EACEA43B3
-:100B6000F71EB1BD902B1928CF0B2450CDF8C52707
-:100B70007F70FF1DF71E05653CE515F77F6065BFBB
-:100B80001FDB9F58085E1E9743C874019FFB6AF4E1
-:100B90003F37EF85085D5F8DF9BE91EA8487929FAC
-:100BA00076D3F3FE12C8A2B874292E318FE85965A6
-:100BB00015F0F15E899B089EB1DBFCD45FBD143754
-:100BC0003840F1F415C97B6F611F7E8EEB58FFB181
-:100BD000F800C5BBC7656F05F79393CD20E1FE70A4
-:100BE0001F952F1DC07C099BD4FDDF39785C54EA2A
-:100BF000E27E235C72B05F1E1B13778AB20DA23EA9
-:100C0000FB51EC1FDF69D4C59DA27CB59FF32F0774
-:100C1000E7A9137E305E332E75148A7AB7A8B7A180
-:100C2000AABB7C718DBA5E034159F47944BE30F69B
-:100C3000AA7E2932C9B1421D57505C43BD0A275ACA
-:100C4000FD32D23B7697D0B3B1C6E01E82E8656133
-:100C500015E5174D18F7343CD0AF405A36EBC318A2
-:100C60004D4FF1ACD9B86FAD54C5758C95F21A845F
-:100C7000EBA556C6E317D0C95051E3790938194E90
-:100C8000020F43D4538677401DC3BBA09EE1146876
-:100C900015F17F44B086E31A3C65E7F71877961B99
-:100CA00028EF287AB0FBFA61CB75F9808637F2E637
-:100CB000F93019D0FE32BBE1C7C02CF623B1FC8855
-:100CC000B5D3F11092D94EC9416452FFC0C1F65A52
-:100CD0000A0A8FCB6E900FC521AF91FB37B1FC286C
-:100CE000ED5E2FB6A9FC5840BAD62722A713850E71
-:100CF0001E6BF242FB4AA33C34568EDA7C517CC90F
-:100D00007907BAE2BF157E39D388F1ABA8B0644544
-:100D1000268EBFDCD121C6634B760CC1F15785E12D
-:100D200099C674D2EF92429313AB18A973E6241CB0
-:100D30007BC93EF309A21D923FF38AFA78A59AC7B0
-:100D400078573FE6B4A3BD7807D99C44A71593FD17
-:100D500038E4A39C29DE1F0EBE23B8D784FBBE3225
-:100D6000795BC87E975B83890EE4FFCAD565FDC8B1
-:100D7000753E6316FB2D16D17FD5E8C3797F1C8E97
-:100D8000B76FCF5E210DB93E1E78FE413ADFBB7AC8
-:100D9000A89FECD7DB283985644BFACD401EB6B747
-:100DA0009A80FAA6DA7D4F8DF01EA1FDE070B2FFA9
-:100DB0001EA0E639EDDBB3B3494E270AD5F7C3A928
-:100DC0001985C4C7A3233C27687F3841E8DB098A1B
-:100DD000E5EE9EA1AD48395ED8CD7CF81F88003E77
-:100DE0007FB1D07B9AD62BE3AF70DC3F5BF0E9DAC2
-:100DF0005046446F2514DA6CA4BF46818099E3C342
-:100E000038FBD53C95FCDD423C07F951E4F1D69026
-:100E10008B1B35BB7324F9553CF73C9F6B0E0D2E95
-:100E2000C0E75EB8EF9859E8DD40A177AA5F6ADEB7
-:100E3000BDFFC90162E881283BABDC7DF9FBA3C89B
-:100E4000BFCA7336276D8FD8D7CB2BB8DE049BCEA5
-:100E50008F687637A6C9C2F9F6D85DC317D2BEF13E
-:100E60009FB665125D13DA42FC3E2CDCFCF9008172
-:100E70008756875C927E4A3C3EA5C6895356111719
-:100E8000E8FD2ED77B8DE2FD6EB5DAE7AC6E9602FB
-:100E90007EF63FA27E5EA4D2B77C7F630BF54F1631
-:100EA0006D583085F52820EA0A07FE925F5872587F
-:100EB000D4CD4BB7EAEB8D4AAA9B693F04CDA40F72
-:100EC000CBEB63D6379472DD5C19EDFFBBA99B8732
-:100ED00015A9FDB1413088E992672779BBF187B147
-:100EE00075710528B9459CF77A64BADF6DECBEFFD1
-:100EF000909427E9FAB5E5EADDC4271BF3C5CCF5E4
-:100F000044F5AB2B9C761AAB76BB1175A798F2ED26
-:100F1000DA03DC5FD69ED3EC7871ADC475076CE85C
-:100F2000CD3A98BFC5A210BDF95BFA711D82F512CA
-:100F3000E7871BB7586A695CF3EB5E7E399FFAD08E
-:100F40009DFDA90F531387F9A6E8E783E4E23E0C61
-:100F5000F745E617A97E5FCD032058A0ABE76BD419
-:100F6000F85F9D30AC1F56CE917DFBD275F5498D53
-:100F70009A6F17119E94376EED2FD6E3041D7B3EBA
-:100F8000FEB778CA7B1B8D9E78EA6B9F3B3884EB5B
-:100F9000989EF8EEC63004D778DFE8FE7C4AE6B5C6
-:100FA000E456F49251F04BD5DB3FFB14F8C6149194
-:100FB0008B465F99FC56A999FA228F809DFA24D519
-:100FC000FB7F5763A5BA701D7007E21C087D3E7752
-:100FD000DAC0EFCF4742D66FC6E1D87DDAE80CE041
-:100FE000F30DAA5FA4F7C88E283DB3A8FDDF3847EC
-:100FF0002F7044D5D1F15929BA7182B3BFEEB9A48B
-:10100000E221BA75E4F7263A1FFC4A6BCEC848DEE7
-:101010009BAC8CD03DF74CE2E47D6CF7ADBFE4BEF9
-:1010200054EF3B5C7A7CE45D32F903B820F2A562B0
-:10103000FC257B1B05FE1A92C798767D1E551CAABF
-:10104000E3BA31EEA051D707B05CA72FF59C665FDD
-:101050000361A0F01BB1FCD67F4751BD5FE67CAFBA
-:101060007A1026AA19DDF1FB561DBF357BD4F8DEB8
-:10107000C7A3E77BBF197A7EA77BF5FC1EB048CFDC
-:10108000EF41557A7EDFB24ACFD70CBF9E8F99B51C
-:101090006374FB87D695E8C6B7BD74976EFFF0C042
-:1010A00074DD387BEB2CDDFEDCFAF9BAF5FCA62505
-:1010B0003724FF8260B56E5FACFC0BF7FDEA9AF255
-:1010C000F7E3AF903FB03C8A511E41C7FF9F1E7CA3
-:1010D0001AAB0737E867DF249B15DF2584FCA407DC
-:1010E000C5F1AC2753E385DFF968DFB9830A8E0FBA
-:1010F000380A4D699467A9F98347F5435A3D135B54
-:1011000037DE5B2CC5BCB78FD3BDB7BFDEF771EE42
-:10111000D6A06E5C7010F8FB17D761E7BB04DD2723
-:10112000146E778D3C5DF52EC1D117386C77A957B9
-:10113000B5EFEC62EB2D701E64BF3F5B7B2F434627
-:1011400031B26B7F52ABC7B43A37B6FED5EADEAEEA
-:10115000759AC863BAD61BCE3423E7D15ECEAB3FB7
-:1011600090BCDCE77C65B8D7E67653118075B28118
-:10117000EAE4508D60A602F41E3A4CFF7312F2ECC2
-:101180002CEAC7879381FBE7CAEADA597E1BA36F73
-:101190000F8D14ED23FAB9D5EDEDEB46B91E97ECA2
-:1011A0006B0BF1D98FC67C3B98F29174B7F85ECC8B
-:1011B0002223A7302EF59BAD00CD5F4C51FAD3FD15
-:1011C0005ABFA427BD89FDCEA8C1176468B43BF9F6
-:1011D0003BA4D8FE62C8E0E0FCD4FF2B89BFDFF956
-:1011E00096901B1DC963CED59A388F01B59E7F5846
-:1011F000E5BFD6F798ADD2731C8F588471F9E1A67C
-:101200000F582E4BD3DAD57E4915E7E30B06DA5C8F
-:10121000FC5D9B52E8147D32AD0F3240BE99BCEBB1
-:101220007AF42F4D3BA3EB43C15BBD6FE87D79841E
-:101230006E71FEF175A29F797CDD20EE9F47CE3F57
-:10124000CBFDA887AB3ED6D9C7DC554774F630CF67
-:10125000FFB56E3D94DA69A2FE636867FAE4879091
-:101260007F1D8D9691240FD48307DD51FDB7D0BA31
-:10127000EC4974EFF5E9FC96F168F3B5B27C353AC8
-:101280008FF90EF338E40BC57C6726E8D4FA1C1AF4
-:1012900034EF852C23BD4F947A39A9AFDC53FF433B
-:1012A000B3B3F3EE21AC9F970C8E93A24F54358AC3
-:1012B000F2BFB6897D4B08EFB64166A380C3C43840
-:1012C000BDD82AC693EF201836D96AA92FD226890D
-:1012D000EF82664BCA6BF3F0DEC7867B57917E5771
-:1012E0002EE9CC23FBABCC0FCD91F0FCB37DBC4FF2
-:1012F000127F242C2FD253980EFE7EECB4C19F2770
-:10130000A1A9BCDD787416D58DA77BF9CF5286B222
-:10131000CDFDF92CAA1B4F9B853DBED3189CE5A79C
-:10132000FA090F233AFD7F92447FCA16324FC373E6
-:1013300092FA789FA1F3E9BB307ABF47F3A49F5A92
-:10134000BF346C12796258CD17FFCB2DF2D9DFB8BC
-:10135000C5FB3F0DFE9EDEC1E0DF3B04D95F3F3B96
-:101360008CFAE9E7365880F25BBC5F311445BE5F0A
-:10137000E98BB4501EFBBE59D499AE772C41F25381
-:101380005A5F75933B83CF49CD14FDD2D4FF44BF40
-:101390004576186A1D3C2D210ADF83C07DEC0EEADC
-:1013A0004747F5B137B9453F141E117EAF63DD00E5
-:1013B000EEB72FDF7FFC18F9AF32B7770BD13DDFE7
-:1013C000E018497E6F79E21EEE9B35B91D7C2FE255
-:1013D000CBF4A21F5A43725A6E0D719FED7A7DF5C0
-:1013E0009EE8EF58D8FA620EF7911D79A437DABD5E
-:1013F0008847933BAAFFADE11139E7DA76A0F5877C
-:10140000B5F1A9579F19A6F6F7E77ABA89AF07DCB5
-:1014100022BF6F3375DF8FFF5F559E5DE4731B0046
-:10142000F5FF2DBD30F6236C233ED1FBDF99480F2D
-:10143000F737940292EFF2E93627F1593B1FCFF1CB
-:10144000FEF11AF7748CF07C467ABFA44AF4EFB52B
-:10145000F5B024E4EA5F27FAA9CB771F39F624DE3A
-:10146000B2F88DDC428A07DAF3B17C46FE0EE3EF78
-:10147000E864F1FE0BF9FB0D9D1FDBB7FFA97C0DA6
-:101480000F12EF69C31B2F0F76E0F3CBE9BBB63C1D
-:10149000D20FD1FF82067D5F0BF9E5A7FE46D7F795
-:1014A0005AC0EFC72C6A3CB168CF0F34EA9E7F3335
-:1014B000C1F34FC27FA7EA37707FC080F737A8FE1D
-:1014C000A941ADBB63FB2F0DADA26FDA9066E63C80
-:1014D0009AF21F5AD7F29F951F8BBEE9CA0C9167EB
-:1014E000139E2467E9700BE70B57FBE212C67BE4FF
-:1014F0006382D99B309274D2BB82E3997C0BCA99E8
-:10150000DE87FCF52EB58F20E2A35B8D876E3A87D0
-:10151000F0CA49E23859A4DE8BF505F7EF46835748
-:10152000CD1FD4FEDBBA16EE3FFC1F5946A94AB0C8
-:1015300030000000000000001F8B080000000000C9
-:10154000000BFB51CFC0F0030947B3A3F20FA3F187
-:10155000E7B0A1F233B9D0D4B3A0F283D0F4A3E3BF
-:10156000762606064626FC6AF061116606061920F4
-:101570005601621D66F2CD0161235106866209069D
-:10158000062E20FD5F9C81C10BC82E01625F20BF2B
-:101590001D886700B11450FC029096156360782E88
-:1015A0000AD1670D647F1323CF4E4B5ECADC3C8AA1
-:1015B00029C3E6B2A87C013506064F750686891A4E
-:1015C00010BE1E92FC0AA098A01A847D481E98DEC8
-:1015D000807C5559ECE61E06CAEB02E5776AE0B757
-:1015E0007FBB0E2ADFC10C959F8B26DFE882CAD70E
-:1015F0007043E5EBB84368003560D6A4D80300001B
-:1016000000000000000000001F8B08000000000028
-:10161000000BCD7D0B7C54D599F8B98F99B93399CE
-:1016200099DC241398BCE02604881A6012121E8AE2
-:10163000781302461BC304D1E22EDB1D686B23CF57
-:1016400001ADC6C736139290204482765D162D1DDB
-:101650007C15156B4AB14BBB6A27402B55B70E164C
-:101660001FDDDA6E60FDB76A955F50A9F868F99FD3
-:10167000EF3BE74EEEBD998447BBFBDBF8B839F78B
-:101680009EC777BEF3BDCF774E9CA484A8E30939EB
-:10169000033F5710F21AA13FB9434F427A09A98676
-:1016A000E7801C9E02CF187FCF9E81A57D02ED02B0
-:1016B0008A4932839022C27E8A5A36AE13A71232EA
-:1016C00096847E31B99896079635103F2DBF75D513
-:1016D000BBF0DCB8B8B67EBE4648DE92BE2357D219
-:1016E00067201C1722E584DC474442F2A1BFD25890
-:1016F0008D97900EE8EC5242C6C4F2F45839147437
-:101700005A20E49B0A1F88889A4CCB3EFC75681EC1
-:10171000C693102749946145E18C6B787B7B7DE310
-:10172000E98376469D62F8FF7A02F33B5B3B720BDE
-:101730001B2F46FF3943F15230343EF693D76C2AC3
-:1017400013C08FF5BB9EC2FBBAFF95F1F249A55BB2
-:10175000ABA2F36D10D538D4277D59322D0756C969
-:101760002421D0EF55BD82433BFBBA6C24A4BECFED
-:101770008BF8159A7C43F05D47049CCFB83BDEDEC6
-:10178000D51520E4D4526F08E9432524277BF87C43
-:10179000FEB9959084CB545E5C2B4470BCD02F4A2C
-:1017A00069FBD86231F428C0D3B0280BDE1BF56E7C
-:1017B000E3E30CA70FA2C9148F32A70FB941D4DD00
-:1017C00053FF7AFA902F903E726F31B523E7BF5ED8
-:1017D00088F7EA73A78FBF763C635D87F3551BC21A
-:1017E00031EE8E5237A1EB7F6FFDA2CC489A7A235F
-:1017F000AF6B25F27BA081E8F134ED36C17AE23C93
-:10180000631679834FBA3E526A796FB6AC973476D5
-:10181000C6925DA3E0430A58E76BF4EB6C91B4B752
-:101820007368515645E84FE6FD6D5497C708D02DB3
-:10183000D036C587D45B9120943F4890841EE51034
-:1018400088B4EC54F5F8DD0294E2B82E067C4AA97F
-:101850006819CF51E8B1AC07591213CCF03B5B9C2F
-:1018600008870C6CC2E55D18851B831B8638330125
-:10187000CA775AD65FF692849BCAD54DA595C4BC4B
-:101880000E069D0A8241A7779E9B5CB18FB7D80A4E
-:10189000E739B7F3CADAEF8D3625A3B593C9EF0D53
-:1018A0003C51E4FD0A7E31AD7B9783EC17A611D243
-:1018B0005EB831066FBBE07FB3913E416891AEC226
-:1018C0004A15E889EC166480D36D9047301BEBED28
-:1018D000221AD2534CB895403DC91B463C19DF47EC
-:1018E000868BD35D4CEF2FA5FD5EC3BBBD86EB336E
-:1018F00052E5787BC080BB04E73154A6F3F8E0766C
-:10190000FA3F4A1FB10A21FEA830FC7B03E8432AB4
-:101910008F1AE0BD499EB804AB3C6BE0DF0E3EF38E
-:10192000C6A4E9941E93218980B8DAF08C4BAFA34A
-:10193000FD1FB95C88BB040E2FADDFC8E17C59CF19
-:101940002902FA4CD6B9907E1BAFFC2400E47B62DE
-:10195000FFAFE474FCDA38C7310407FD6FAD797E60
-:10196000F4BF313006F2651DD29101D7EA4A09E190
-:1019700048CE11E230CEA1DFFEE19ECB289C2F574E
-:1019800009219786F0FA081D2FA97F14184D4E10D3
-:10199000637C8DA8804FFBF8A9F550424B802F9BAC
-:1019A00055A776371D6FA5143A0C7A8C8C65FAA171
-:1019B000599D5407EB23098C3EE60979D8AEDDBB6F
-:1019C000610CAEBBB434ADBC6AA68A42AD84EF5B99
-:1019D000268D0A67DC313860A2EB96B78AEF39644E
-:1019E00082738AE00BFC3E83FE3293CC8475FED07A
-:1019F000BB28334146EEEFBD56A54D7610F249ABFC
-:101A000076CF21C7F0EF2B2512ED2B1FFEFE6A418A
-:101A1000E1F88839C13E33E69D9AA73780F4BD12BC
-:101A2000C42F25F595BBDD6DB259FED8E691C2EF06
-:101A300005B65302EB63F91AF05B64A100FDC8F42C
-:101A40009F1943FCB8724F13E33B1BBC9D81BF0D34
-:101A5000BC67E3E30FBD1B3682BDDAEE60F4D291C2
-:101A60002B863690E1F462AC8781C7735D8F2D823F
-:101A70001BF9C3A0A36671E9A8EB7E363ABA15E854
-:101A8000E892FF793ABA0FE8A8FAFF241D6DFFBF6C
-:101A9000484743E52BD15E58C8FBEA1FF8EF6F8338
-:101AA0007C7E5D9750EEBD3E87C9FFD7234C2E2626
-:101AB00049A4A71AF4C15109E554526FF721BCD4C7
-:101AC0002486791C81DFE8F847B9BDF46AAB42127D
-:101AD0009371FE458BE8F757AFFAA410F4D7AB74B7
-:101AE0006DC1FE266450D769FB5752656A8043D9A1
-:101AF000CDCA836DA763609F270556FE69DB693DEC
-:101B000086E36DD97825C5E742F895C271DD1C21C1
-:101B1000AD1DF6A2E06478A92316BD4AD7E545813C
-:101B2000D28BB298DAA188BF3041FFB094DA09268F
-:101B3000FBA2051418C8E57A17EA3F7BFFAFF079DE
-:101B4000DAEDB8EBE6D438405FB8169F940728FC6E
-:101B50000B170B0E660FC5886A825BD4051DF44017
-:101B6000788EEB21D07F619938D434F358A8BB2C00
-:101B700076D749AEC7285E9630BF452B6A9A325455
-:101B8000FFA4A17F6DF319892E8C7918E5C5734EDA
-:101B90001ECAA1709106213451033AD58ABEE233A0
-:101BA000F79F61D8373EC0DBEB4BAECD647410417C
-:101BB000BD6AD0D32F8E7DC33100EFEB72502E5D06
-:101BC00017962CF6E4B5F51996795D3FE7DA51EDF5
-:101BD000701231E1C144F7FE0282744AFE8BDA29A9
-:101BE000944E63B58311B45B8E0B5A3B2D67CE6D5B
-:101BF000190FFDDE2966637D616ECBE401B4B71673
-:101C000020FD67F03E339DD13F94805C9D289287F4
-:101C100034B04747F70B3A016F9387CA8E402426AA
-:101C200050BC6931B5521A05DF715DAC4F47AF1337
-:101C300044B66E9DB1456A290074C82A37B2EAA23B
-:101C400068FF19F5291D4F107361DC18BE4FD17163
-:101C5000379D176DE761B608C9BC78512619651E16
-:101C60001DB6F5A7E25F4F27675772F8C87ED6BF4B
-:101C7000219332B369FF69EA1BCF2EDEFFE990485A
-:101C80009200A71C56001E52564BCCFD10BD02CB35
-:101C90004E5E7405C34A31C5A7AB5C846990CEF231
-:101CA000877459033CC470BD37D3B52D34F1E5E6D4
-:101CB0003F4BE8E7AF144BDA406E6CEEBF89681417
-:101CC0001F9E609C6079CA8D0AE0693375B29230BC
-:101CD000BEDC47008E8C42FA3B1D274325718DF6F2
-:101CE000276B7D099196E57A12D2E9279F1A123C5B
-:101CF000D4FF3E102C6993E9FB8EA504E52301AFC8
-:101D0000DC443F1DC1577509E867090901C01D8101
-:101D1000E538CF8DE5CBBB8BE9FB530D32C60FC841
-:101D200017145EC3AFA77E86A78CE830DEE63C12B0
-:101D3000F7A21DAC237E9D2A5B3F6D7B29494CA7F2
-:101D4000DFB366F4C3F8B17F22A1896C48946B328B
-:101D5000972744A6F407E3B7A8A1BBD3D09F42229C
-:101D60003789D5A67556C3E8C7DAF196E924570333
-:101D70007E3B2A281FA4917BB78A22D2413CB468BB
-:101D800061499A71EE1435944F46593BED44F8473A
-:101D9000AA3F544F26891CE85A17002F241CC0F96B
-:101DA0006593D48F0EE51C3EDF31248AF582B37A29
-:101DB000FB81DFF2F5BE1AC0C53FFBAE3F82EB46AA
-:101DC0001E54C18EA5D0969EC9199217A073607E2D
-:101DD0001F8644F43B7C6242D569073E773288CE49
-:101DE000AF46302E97094D28C077B72A1D6097F867
-:101DF000494880EFBE901C33DBF59984962DF11491
-:101E000072B474069216E30FA2F603EBA865D169CB
-:101E100000CC7D7EFDE7E0376DF145D00FFBC4EDD2
-:101E20009F0A83DDE6F13F04CF4FDCE3E2E89F85C4
-:101E300098BFA5D07F40DE65CE922DFE4D966E2DCB
-:101E4000E7D8FCB0059217E799750DE1FE95DE30F5
-:101E500071CC105C14A226A0976D753201FFDFEBE8
-:101E600065F018F0E54877CD0478291CC7010E8A83
-:101E70001684E314F922014BEC2F23183FA5701DA3
-:101E8000B7C175DC06D771335C2D0A9BAFDD5E8C64
-:101E9000D592B22805EE3991FB1FD46E02BBF11426
-:101EA000795FAF07C2095F8D7AD6AFB2365E2589FA
-:101EB000C10A95A8480776BB91AED38716FF6B166B
-:101EC0002F6B4480795038ADDF4921D20B96259293
-:101ED0008A0B2F9F65E04BFBF26F28FFDD74D84122
-:101EE00080BF281F4BF0DDC1BFDEC4E3C3CBC1BF41
-:101EF000A6F8FB1A09FB01BE0F888871A80FC8ABB2
-:101F0000FEE926397942E4F6092CB1998F4928086F
-:101F1000725CF66E4C4A7E4483416FC2195CC710F6
-:101F200093F35E467731A2B4A13EEC66FEA7114F53
-:101F3000FD7AAFD51FFEC6766BF946B2680CC44B6E
-:101F40006FFCB683C469BF3799FD7BBA4EAF892A4F
-:101F5000C2F70D12DD0876499783D91BCB55224372
-:101F6000FC73F5BF7D67C6323A9F53200FAAC17E2E
-:101F7000A7E09BF4C88A40DCA9970F9F5FBB106A5B
-:101F8000BC4C18797E5D8E6423F8DFB11E07DA99A8
-:101F9000C41E07DD27611CD4D40EE1FD6AB7757E2F
-:101FA000679BBF7DBE84DC8BF35DB17B19DAE723D1
-:101FB000CDC7B99BDA9B69F49D57122C711F83AF73
-:101FC0000D7AB7F37795A4B1B80E558368AFFC2EA0
-:101FD00023DE8EEB1B9D09EB7BB6F6B3A17DEE8570
-:101FE000B79FFB578E3FEF2CED572B830B60BD3710
-:101FF000057AC3C09F461C6B0D89E905F457C7B32A
-:10200000EB6260BAA5EA05CFB15E21AD279D43BD65
-:10201000D2D1FB3BC1ED9217F63CEC043BF5832794
-:102020008E35821DB0F2DF25A2507A38B1C7471233
-:1020300068AFC49D60DFACA07417C77262C6B526D6
-:102040007B985234AEC3CAA77D6847ACD8EB8A37B9
-:10205000D0F62B7EF4DF5309C5C3890D833F2F00D3
-:102060007A7E426071D7D8C0D46BE9FB1532F9C7CC
-:10207000701A3A5A26317E7AFFC7194BC04E147631
-:10208000F77F05FBEDFBB2C365D2C74B24078E4B30
-:10209000EBA11F117B5C884F14187C667FC088778A
-:1020A000BFFFB8C0E0DBEF88BB01BEDDBB9C115AAF
-:1020B0006FEDEE9348D7F39E7ECA0F7858BBDF6A68
-:1020C000A7AFDD2D255C53F1790C9EA041851980C9
-:1020D0004FC6CF6BF6AD46BDB1A66FF349E0E7B58D
-:1020E000FB1D16F94FF1124A005EDF90420D50FEC3
-:1020F000E1F7FC1A45D57BC947FD8057DAEF322757
-:10210000A5AB85B3ACEDA0FFD3D9C3FBA39E21FA49
-:10211000CD6BFB36B1F1F65DF30790B76B09D35386
-:10212000063FBF07BFE40DD7339B246B7CEB1479CC
-:102130007906FA81BB73D2FACF865E31F87AE5531D
-:10214000A776C6E8F8EFEFFDE3CE189DC7AABF7CDF
-:10215000B4F34EF0979E77AB20AFD63EF19A9F989E
-:10216000F0FF88C4F6034E3CFEBDC776503E39F101
-:102170006B17DA81279EFBC3388DCEFFC40F3E1D3F
-:102180000376EA2DCFCD1F0BF8B8E599796347B3F5
-:10219000D7816EE32EF3FAC6B17F6DBF009B20841A
-:1021A0003CCB9FB6753AB84F4A4088E083375D71A3
-:1021B00017C5CF5AFAAEA512D66D35EA2B28DF45E2
-:1021C000F1BD664FD749696A3ABCC70AC4203C13BF
-:1021D000052408EB7EEDC2CBABE0E908694027643B
-:1021E00010F584BDDDDAA3747DA78DBC9ED49E70EE
-:1021F00002FED7EED9C4C6EDA3EBE91FBE9E1FC0F9
-:102200002FB387AFE741C91A673A45567D77077CF8
-:10221000DCC7FCCE91D673F533D78DEADF19F2E136
-:102220006C786E16185C5B25FD5712F0E3DE271FF5
-:10223000DB1160EBDC401173E2A953E36093F71DFF
-:10224000C7E057404E0E3EE752C1AE5EF1DC1BC800
-:1022500077279E39E2D4707F9A7805AA274F90D4C9
-:102260004F12F4E61A8115D63EE24BB8FC43EBB5AB
-:1022700026DE54AFF9F1FD317C1F67FCB026DEBFCE
-:102280005848B37E5EB984E9A7782EE265B59674A6
-:10229000AA5EEBBA0AB3603D8F2D00FA1B693D8D33
-:1022A000F9AB30FF99A6757D84F1F148FC7A62970D
-:1022B0004B163287AFF3096E57AC8D0B6FA45B776B
-:1022C0004236B0F8DE08716FE369A70BA76CE573BF
-:1022D000A3BD31FFB3F1F9D9E7757E783BC5F5B5FC
-:1022E0001D7FEF7F915E0F94C802D75BBDF5F92685
-:1022F0007DE776503D560C76673456503C04EFC669
-:102300003E09E5FBFBBB25B4F7ED7262CD087E7D8F
-:10231000C818677FFF549067EF1FF831A74746EF53
-:102320006BF61C73C6B85E889BF502F497663D2E6B
-:10233000E5FDAD7D367D7F6BF79C4CDBDF7BB2FE30
-:102340006580FFBDA483C46817EFF54969E324A540
-:10235000B2C362676DF4CD783393B693FC1E0DE67D
-:10236000DDBE417F2306F6C8AB0E82F6A31C7AC7FA
-:1023700045BFB7FB3CB8DFD2EEBF916826FDDD61FB
-:10238000C3931C0CA31F2D07C2556C2F346EF1672D
-:102390001DAA68819BC8B142D8E7FC65F11F64E8BB
-:1023A00017E2699A292EF48A4C3A73687FAFE842A3
-:1023B000A88DA4896BD9FA0FCF918866A6337DBC0E
-:1023C000688E2FFA0FDC8E718D16124D40BC891469
-:1023D00092BE474DFD3ED8AAB1B86B78BC688EFF5F
-:1023E000B9A251DD45E128BC452D01FF6DA4F18B5B
-:1023F000A2D67D5F63FCF53C1E41763FF1C413B469
-:102400003C1EBE616A45BCCD09F13795D937F3B89A
-:102410003CFC29B79F0F08E1436087E977C56490CA
-:102420007782D626839D51FF454C5E6EA2C77AED1A
-:10243000641EE8D5EFFE595A928E4EF773BA6AFBC6
-:10244000A71FE541FCEE01F76D85CC990D237C8536
-:102450007C9E878ABEE185EFFDAB6FF44EA6F8291E
-:10246000084A04E2350581655B2A60FE47A5905B5A
-:102470001BDEBFF1DCC9E37A0FB5AA28FF1F690D87
-:1024800062F9318ED7DDAD65F87CA23584DFF7B413
-:10249000CEC2725F6B3D3EF7B686F1BDFF8E17056B
-:1024A000A03BF22DD207F19A7DAD4BF0FB8F5A2362
-:1024B000F87C94CFA71EF0E2B5CC1FE331FB3BAE16
-:1024C000D800F118038F76BCD7D1A962FF9AA0017A
-:1024D0009DDF2E33F962C7EF38574208D3724B9411
-:1024E000E52BECE4716363BEFF2A337B731F87E740
-:1024F000C7EEC8F765D86FAA2F2DE7F1F110C8EF26
-:102500009D42786B05E59F178A6606CD72B8C8179D
-:10251000D9279BE8675C378BF7EC9099BC1A4F4E34
-:10252000F66752BCEB5F100DE8CE98EF811AAD1044
-:10253000E4E40141C0F5D6BF10499989EE8CFEBE96
-:10254000238B7C7F23BDDC1EA263260FB2AF92CB10
-:10255000C0AF3D453C2189C2DB9947F681DFD209F6
-:10256000740976F26F33304E6CF8375BF87A67BBDC
-:10257000D9F7536FF9E2207F46F27B36F2FA1F72E9
-:10258000B856CBE15FC9B8AF1C1758BE4302E398F9
-:10259000056C2A944E976EA56B45EEB9F4BD3721B4
-:1025A0003EF8C1336E0DE0EAA93AEE37E391AC9202
-:1025B000DF37EFEB18EFF34F17203EFF1F891C3377
-:1025C000E339BF79D009ED3B056D5B1DCCEB3509D7
-:1025D000F9AF53885F84F13399A05FD07953300EFF
-:1025E00072CF68E70B59F93BDB1D5EB20CE6DDEC00
-:1025F0000CC5D2C8A7DF666816F9E00A5ADB0741A6
-:102600006756B3B246E9B382303911927509FCB40A
-:102610006A12C1E74CA2E133CF11F90CE6319D8477
-:1026200035807343C6B8CBD8FEC1FF18DE14C7FF90
-:1026300041BC19F41ABCB46C1BE41F903B44DC6F22
-:1026400069874F263A5FE810387E1594E7053CAE5F
-:102650004FE5FF0B4501EC86C549D40C9483057CFE
-:10266000C3A065E024C67783E3088FBBC731DF6969
-:10267000C72A11FDF507DE12E290EC726A55C99186
-:1026800049B47D0DE573589FECAB4A33CDFB0C0686
-:102690007F3CA08433D551E2FC065F18E57F19FF2B
-:1026A000BC007268DBF8E7FB413FE40F08211063D0
-:1026B000F9DEE864904735BF7B3C0FBEFFC6139937
-:1026C000635E9F1DABA3E3014EAF2F3C17DE870B6C
-:1026D000E33780BC3B557F8B0B97D9CBF25E5AEE2C
-:1026E000D2B64DD6465E9F9D2DA3EFDF18F3DA7963
-:1026F0008EF332D6EB54FDE228E8713B9EECFD668A
-:102700005FB578D4F11F04BDE2C2F92F35CFBF30D9
-:10271000AA627E8BD1DE98AFBDBD7DBE43FBC0E714
-:102720009617D4E72039B0DE3FF87CDC0F5F2140FC
-:10273000126109E89FF2E71A806706894A8C1FC276
-:102740001AC87F839E778C792C0FF5821C2F4679CF
-:10275000778EE3759270B806ECB2901832DB2BC618
-:10276000B33D45E7098CABBAB81C1133EE0AA6C3DA
-:1027700073AAFF42CAFFA63CA62D84B078544241FA
-:10278000390F814295961D8749E5DDB4BF66079BE9
-:10279000478DCCE221D30F6BBB241657959A7C262C
-:1027A0003CF2FD0623BEDB49EE22AA067E45453FEC
-:1027B0005437F8F4E7CEC8B71D908717D430DFD36D
-:1027C0001188086C3F8EED0F15717E9D2F2D55C021
-:1027D0002E6921E17AB04BC85189B03C3CC6D72E56
-:1027E000631F8CF3B1CB4D783C38C8F89AF77390DF
-:1027F000FBA53FE5F6C9B3DC3EF909D827B45CF484
-:10280000F1E00180733FD8292EB03742F87D1FB721
-:1028100053FCB77812E01FEE6DD5B1FC706B333E00
-:10282000EFB9F5709B1FFA7FEE4707FD14BEEFB4BA
-:1028300010E4D71692FCC54A80372A627C63576B36
-:1028400014FBCDDF923C007B24BD2D077485BEEFC9
-:102850008AD68A6E5A6F6715C1F8C64E85E21DE4A6
-:10286000631F41F908EE12CA2F2E9F32D79522FF1F
-:10287000F654EDBD0AF051788D88DB2F06BFB9BA4A
-:10288000070656D2F283CD7BDD4086D9B9C9F52F34
-:10289000815E9F43E5AD06EB92EC5E40D7B7A06842
-:1028A00091328F96FD7D1BD7817EF6EFBBFF66F0E0
-:1028B0008FFDCF3EF14D2817D8EC59FFBEFDB7B1C3
-:1028C0007A2FDE0EF50A0ED379D0F653D563FD309C
-:1028D0007F8ABF81CDB49EA3CA9AEFF894613F74FA
-:1028E00012A4ABED3FD82FC2FC0303E11AD8AE19F6
-:1028F000F366B41FC8A7F01D86FF5DAB3A76413F73
-:10290000EF3A8A919E1E6839001175F29D6FBE8E56
-:10291000F47C70D57A02F4E05A25635CB160F52D41
-:10292000E41B2679E16A91D3C699DF75B8907E3BA6
-:10293000572D4E4EE2640A7C38EEF63A05E5C5CBDB
-:10294000D67C07637F781789BCEB40FE62FBC4B27C
-:10295000CAF6932FA148077B89AC15599E5FB8CF63
-:102960006D8E1F16AE16C3E9E0F8D421E3BC3AA27F
-:1029700075EFBC48E72BCFBC15ED52D26B1DDF18AD
-:102980008F8EFFA9C3947F22AB0C2E8D84441F1D14
-:1029900077CF5E4F3E944F470D7D95C0FDD3A72B5B
-:1029A000C4C4780ADFBDBD22E6A11CAC67FAABE760
-:1029B00016B6AFD5C3CB3BFAA801563CC44F863FF1
-:1029C000B023CAF6BFC91767D0BEF0723ECAAE7850
-:1029D00055C1FD8998EEADA1EFA71183DFC4A175A4
-:1029E00007FB658B950EC48E6C4B59A3C6BA39EFA5
-:1029F00018360D5365D4A74715F0274FF5C904ECD9
-:102A000097697C7FC88ECF1D9CAF7742DE0CF81D86
-:102A1000ABF6BA350AF7CF0C3A6989EAA0178BEE04
-:102A20000AC798DF63CDA3868C10C07311DF87229D
-:102A3000D25B15480FCFB23C5A631FD15168CDAB62
-:102A40002EB7E58317D9F2A8CF37EE52EDB4C7E31E
-:102A5000B65C84FA42F3A31CCBE7633D329BBAF920
-:102A6000D386C75F52FDF2F802E9F5E37AE673799F
-:102A700078CF1D5233F80BFE159559E638E9D54E3F
-:102A8000E6C71CFAAD0BE979679DC2F73D59BEA7B1
-:102A900083AF7B9353C37A3B7B6F55009F5D81125D
-:102AA00037F473F0D29FB8315F85E7AD1AF278033F
-:102AB0007D7F13EDEF3BB922EAA4CEC257F360BF8E
-:102AC000FEDE3A05F352FD19037D0769D97BA73372
-:102AD0000479233B6B124BC226B86E7732BDB6D455
-:102AE000C9F787B658F33A285F2C7542DE98378AC3
-:102AF000FB99A2C2F37B6D7EBF810FFF81ABC4E265
-:102B000029EC593205FC54262FE33CDF6A27D70B0A
-:102B1000867DB183FBAD5BB8DF6AEFB7B4593F8008
-:102B2000F6D92AB5124254F6F59DD06D959FC53160
-:102B30002B3F8C6FB1F2435134DF52BFA0B9C4F2C6
-:102B4000DD17BAD866B72498BE236C7DBADCDE09DF
-:102B500020472AA93EE6F607CAB791F47DB343DFC2
-:102B6000E004B9768E76883F231C85789BDDCEBE47
-:102B700087AFCF3FC8FA16E88FFA75F760BF725C6F
-:102B800060E787AC76C93038B99C1B05CE7F719E53
-:102B9000877D76B6FD37FBBEDB6D5278FB2BF439B3
-:102BA0003793E54976FA989FDF09F1555A7E8ECF23
-:102BB000EFFB4E099FFFCECB733368FD34FC6DC431
-:102BC0005D7F0A0939506F6CFAFC4BB08CF07B4189
-:102BD000FAEF3F75B27DEEB9E3471FA79F8FB3C5EC
-:102BE000A13FEB34C5F7BA9CFAF3E6F24127DB9735
-:102BF00036E8C2C8AF34ECB45B1DFA2173FDA1A75F
-:102C00005D5EB2FD915CBE9E3EC2F8EF674B966F73
-:102C10009A48F9D959E845FB277749C73AD10F793E
-:102C2000494915FC845C2EBFC96226378DFDF6EC40
-:102C300006AB5CB59FC372F17C7997FDFC0D97AF35
-:102C4000767A1C49BE1EB3C9D7545C7B04BAB2C79E
-:102C5000B55BE057667F72FB389CB968CAC8F4F868
-:102C6000CBD6C19E431387CAAFC0B99AB474C0F61D
-:102C700019FD07DE6D585C05FB795208645CB235BE
-:102C800031F7ED8943F22B3C27EB67100F0DD76529
-:102C9000A1BC690CFEA9E7500E95CB7AFFDCB74DBD
-:102CA000F34CAA14DA09A3F089EEF8CCCC5FDF0369
-:102CB000590F76111F6F2BC7A7DDBEEE12632EE8EA
-:102CC000F76332A00BC5A3CFBB03F136E0053A1B77
-:102CD00069DED35D4CBEFB67454310BF739D919089
-:102CE0000F5CE30D3B268476CC0C5716A3676F0967
-:102CF000EEEF51FF7DB01FD6C1CBF2FE0DFDF89176
-:102D00001167E57AEFE62C56DEDCCAE2CAAE83B381
-:102D1000DFD0683BDFCB0E0271CC4D54AE437CB0AC
-:102D20009BDAF9F0DD5F354020BEDE4EEB474CFE0E
-:102D3000787BA85685FDC68EF24A05EC0A694A15CD
-:102D400096E5E24AB5968E39A5EBFE79B9101F2FAC
-:102D50001531DF761A2DB79552BA76A938BF5F962E
-:102D6000BDED05FB2C1B82A9D543EBE9A88AE8122F
-:102D700085C711546B214723A5B7399DD1F70F4162
-:102D80007ED1F784C86C179DFF2FF9B9AC2E67B4BC
-:102D90006C3DF84372CC0571C01685ED4F003D7453
-:102DA0004C1F82BB96E3D7CDC74DF9477C3D3F967C
-:102DB000076290F2DA2592E674EBD3E06272AE43DA
-:102DC000D5D551E949953FB3E455CF61FCE40C50AA
-:102DD0007A32F1F548F25A728517BB7287F298E899
-:102DE000C2AAC8A784D981C6B99F3F38F52558CF54
-:102DF000CBF04A0AB3914EE9FBF99EEA0B91FBDA5C
-:102E0000D63ABA6E07E6541DC17856D2817124FFB6
-:102E100004F28F663BE4251706E3E893C52DEFA681
-:102E2000F4119FCCE21504E826832A62D89F2C1265
-:102E3000E30F1503BCBBEA27D0FEBAE489D4521FC6
-:102E4000EAA7A688F9033DB59E66B35FF0C70CB646
-:102E50002F739BB7E619171DA7DC1BAF45F30BB209
-:102E600036C7B0735540C797A8644010410E860915
-:102E7000D39B2185C54DEB543847259008399331B4
-:102E80009A7EB49EB77A428E6FF0003E022C0EE618
-:102E9000DB2E6092A0D4A7273C2012BC8BBA5CA882
-:102EA000C7C365304EFF0C0FF1D2FA7FEA77E23EDE
-:102EB000789FAF4006BC3E2F2EFFAE93CE77F0D763
-:102EC0002ECC7BECFBF3C59897DFE7BB6C01C8ED1C
-:102ED0003E811CA6CA9ED49C2EE049882403F6FF9E
-:102EE000FCF37402FB30833F2368FF39822FCD7DD2
-:102EF0007B3A4E3C439C45DBB949B79BB60B7DE61C
-:102F0000F9E80A4A577BBD95F74D2343F11623CEC6
-:102F1000529711D90974D139E63F9B816FBA299C28
-:102F200012FA137A10E0AECC15312E4972BDF18938
-:102F3000F47DCDE1401DE495D6C8159832EB9FC7CE
-:102F4000D6FB379EC86E986F9DDA549745EB571D98
-:102F5000D550CE2E08AE3B04E5196FB172A793F1A0
-:102F60000BC4918849EED69C1E87F3FB21A7938E54
-:102F7000A09ED48551F9C6761EC19A4767A603C89C
-:102F80007F37D141C461A68359940EA698E94017B2
-:102F9000CE870EDA50595F08FFE86FD40943F1BCC1
-:102FA000E17CB04EC92E1FCE2F061C775765074017
-:102FB0008E1A7CA1CEBC0BE5AA6B99330CFB2D06B7
-:102FC0009F18FCF1A9DB817C48F9A411F87DB15769
-:102FD0009B9F8E4FC00F31F3C3B523F04D23193C97
-:102FE00014A08D1A6512CBA4A2E497B3DF291D6744
-:102FF000E2033BDE1AE708E4B8459EB1B209AF6AC6
-:10300000EADCA374EEF87F55D63A03263EDC48FD91
-:10301000103096BBC51001BD52ED5DFE29D0A5DC78
-:10302000F08320F8830E57B819F36967BE9F7123A8
-:10303000A5CB3F8D1135987CA7B6FC69E4E7373303
-:1030400008D8273D3356603CF84F3745C6839ED895
-:1030500044F17F1CF5727CAC88B9990363D93EBCFE
-:103060001664CF4890BD27FC7B9C97755E6F00EB84
-:10307000D175B6C8C71E37A3F71E37D3179B9CBDA3
-:103080000AF0DB60B1A29AF3A0AF90981D5BA5F0A7
-:103090007DA92FDA35881B5629ACDD7DAD7D687F93
-:1030A0006C6ADD8FCF9C8638813C2B4F594C83FD59
-:1030B00070E52FF30407F0F1C56CDF16DEB799EC6D
-:1030C000AF710AF36395BF4811E04F65434CCB36AF
-:1030D000C959451422E9ECE8AD6E99B5DB40F0BB67
-:1030E00072E05F719F3BA734247C1DCA1B7A49881C
-:1030F000F6E34EB0F781525DF89AA9DF40439F4551
-:10310000CF35D225C8AC44EB09CFC1746A1EDC1799
-:103110006B0CD4BE2B4F1D4E47F073DC440F06FCE6
-:10312000C6FEEC2DDCFFAE2B5190FF3A5B9CBB4002
-:1031300035372ACC2EFA38503BEA3902D897A59673
-:103140001BFAB9F084FDD9D864B63F0B65D89F85CA
-:1031500027ECCFC213F667E13BECCF42F9FBAD3A67
-:1031600096619F16CAB04F1B9BCCF665632EB62F97
-:103170000BCFFDADCDF8FC496B14BF3FDBDA82E528
-:103180002B5CCCBF2165B120D8CBDDB73B75C8BF68
-:10319000E9E47470502FC909D1757507589CC0FDBA
-:1031A000F2BD780EDA1D1471DF7563F05EF255FA28
-:1031B000ECAEF675431E8CF2B4179F6EF93EA2E199
-:1031C000BE6CAC1922A7AB94E97532B5134A83EBF8
-:1031D0006AB36979BD32BB03F21127696DA1E5EAD3
-:1031E0005059F355AEF881A93CBE7C97ECA1F56F20
-:1031F000EBBEAC03E401C001FBC86DCADC3AB0E32E
-:103200001225D45001B956EC8C033D7F0DD66B22AC
-:10321000C0CFFCA92F91F620C435C66BCE4AE0433F
-:103220005A3FC1E8FFDCEA774210387778BBD1EA31
-:103230008955E7548F48A3F407DF85D1FA21ED6A59
-:1032400092C2BE196406D8476EB6FFDBED60FCDFA4
-:10325000ED66CFB739DFFFD85D3BDF4DF968BE9B28
-:10326000F161B73B5C0FE75006A788A18708EE9B8A
-:10327000C4DC7028A1A5F857705EE8D6176502FB7C
-:103280000A0F72BE9D38DEC7F4F49D0AEAE92BC727
-:103290003FD5914DCB131F0E8540EF6E26210FD0E9
-:1032A000496C8B88F9294F564DC86EA2D52FA97E3F
-:1032B000261BF4CFA70AB377E3DCDF68EBBC713CD5
-:1032C000C4FFFE7484C9BF2739BDED7224A3B89E24
-:1032D000D55EB457A8C380F6485B50C6BC22318F78
-:1032E0003D9D0EF5EFA09E932AFC1885C7F9E7993E
-:1032F0000AC63F4EBBF8BD1749B4539CEE889A45A9
-:10330000DFF7C644E4F776D51307BB7AB3B712CF1D
-:103310009BC6CA653C77B2B95C64E7657CD7C7C118
-:103320003ED9DAEF66F2C1AB605E69BC7CDFE1DA00
-:10333000003C4515F83DAE2FAA47BCABA28AF9A9BF
-:10334000F437FCDE1CC0732A1023C7EFCD2CFEDC43
-:1033500039E6B397A641BECED7D510BF8B00F3BFD9
-:10336000D1E412619F68F04006C0F30FC63D06032A
-:103370001B3268FD8EE56A08D661AA5A5B0FF90513
-:103380009D6A2DFA391953EA9465288752E734F07B
-:10339000BE8C8E7219F38BE03BF025E92087E09C10
-:1033A000BCB1FF9C915529807DD5D980613E38C73D
-:1033B00060C937EFC8BE1ACF27498DD9086727D112
-:1033C00015A81F6B9051FF15789504EE3F18E7ED97
-:1033D000E1E88529DE90B3CA7A7E23AF59B69C17FF
-:1033E0001F1BB1967379FC20D776CEE34F8AB16F5D
-:1033F00066C5937DBE398187B200DE1C38E0AB0D17
-:103400009FCF7D81CA26986781EA41B883EA861AF0
-:10341000905F6349B40DE8EEBCE1B5C139B5BC239A
-:1034200009EB3E559389A641BC7D7003F4BB99D34B
-:103430007977B1551F3FA848063F4E75E7429C512A
-:103440002431D3F810878C99C69BD09D6D294FEC01
-:10345000CDB7D49FBCBDC4F2FDA2F8C596EF97ECE2
-:10346000AEB494A7F45D6AA93F6D7FADA55C91B839
-:10347000DA527FFAE145967275F2EF2CF567BEB924
-:10348000DCF27DF6C00ACBF7CBDE596F295F3E78C0
-:1034900087A5BE61AFDBF56299FBC2EC7417DC1F38
-:1034A0006189CB5AFD00BB1DAFFCA55DDB0072CD71
-:1034B000EF44FA96418FD3F2FADB991FA5CC0D6940
-:1034C0002057C671395AE4D3AB418ED6F815D407CC
-:1034D000B297D593BD0BD0FE18B79DCAA3E9606D16
-:1034E00092D4F70C90CBADB1B9A5A678935BEDC59E
-:1034F000335B35FE7A02F179A3BDACEA2402FD40CC
-:103500001004E2E7D44B857A6E8DB637CDEB795156
-:10351000C4A3D183D4DF7BC8E4EF8DE4DFD9FDB948
-:1035200073F5DFC689C483E70D8470149EE5D1234B
-:10353000B590264CFDBA1B807E7B9CE1E65DB4DF36
-:103540009E120FEE5F1A7E5D77711FF2C560B18C1F
-:10355000FA85C85AB9391ED7C1D737437912FD4AFF
-:103560008A7794B706DE370B03F176903BB77B5032
-:103570001E8EFB2FD7ABC05F4A8952A0D0F7A18324
-:103580004E1DF6B7EFE3782D512B6A21A4541A6C27
-:103590003A00CF491AB533E8B3AC6CDB0178DEEA08
-:1035A0006679C217877E500BB24499CBEC3F79AA5B
-:1035B00033BE81F623A9148E347E85F194FCDBD9C9
-:1035C000FE45A9FC7BA037B0EACFD029D4642B7884
-:1035D000FF8C1BE840C027D28F3BE045BDE186430E
-:1035E000AF5096857886C0EC53D89FABC9DE8EEB82
-:1035F0006ED8AD60CF46989FDB01F41568B0AE770A
-:1036000086F27DC45387C0E2DEDD59DACBB574DCC7
-:10361000EEDC926C88B1425CA4C9246F7AB8DEFEFD
-:103620008A47E4F96F4CDEFC05FAAC1EB27728FD40
-:103630006F1727007CBD04E496FBAE5E02F4EE56E5
-:10364000E96AA25D1FD3C2A84F99BD7B3387A9AE9B
-:103650006409EEFB7F14A844FBD6DDF27C5AFCB96A
-:103660000724A24F1F19AFFE493B50DF9312A70654
-:1036700076458BE6D477A59107E5DC0FD934CE38B3
-:10368000E7CACEDB76737C18F1D0549C91C7D38CFB
-:1036900038A3D1CFCDB9956347B3C7DDD4BF8C98DC
-:1036A000E0DD44C701BC747ED1548F7890093BA7FC
-:1036B000FBE7F25D904765F849E5DC7EA9E2F81D7D
-:1036C000E724E827CC83B8490E78B55FAA07BE3453
-:1036D000E22CBF03638BD60BC588C4E26A0E436F2E
-:1036E0008967A621CC9A7306BBE28BE5A332BD465F
-:1036F000FFED87F36413BAADE73527F65ACB93B7DE
-:103700005BCB17C5AD656A351F05BB006C348C5BA0
-:10371000ECB67E6F32F603EAD8F932858E7C86E904
-:103720005FCB7D3984EBFF7CDE4F515FA206C46B1B
-:10373000E12D56BD9ACFF57CBE4D7F56FA248C27DD
-:10374000D41C0E1C02FBD188FBFCC6A359EE7530BD
-:10375000E2377679EE796B1BA15FD02F8FB8581CBA
-:1037600003E2C39F14F17849218F978CE3F19222F1
-:10377000162F7148DA2B4B05CC0B3DE9463B233A1B
-:103780008DC569D839AF0FEBE59F091A1B2F621A57
-:10379000EFB6B2D8950C0DF13CA867C44D8CB8803B
-:1037A000D7A7CF073EDB1C7A357A90D249EDAF5DC3
-:1037B00004FA992FBD7CB815E45B918CF9DCEACC56
-:1037C00055DFF5401C12BED3726DB13616F9E01705
-:1037D0000E8C0F7471BA36CE271A7116BF87D94571
-:1037E0001E8F60EC037978BEBE07ECDD4B76535A32
-:1037F000B4E83B16CF33E27653FAACDFFB8890A3F4
-:10380000D2759CB6242E32FB4AF7D698F21D2FE6CD
-:10381000EB367569E2DEA5B4BC87C42BE11EBA0A9B
-:103820004E1FA143D673B1638880E7A2C61C9542A0
-:10383000715A7FEAB3D6EFE5B673B317DBCFD1DAAF
-:10384000F6857C1239B98C8EB7458B0A2047B72C88
-:10385000A5B63C2D4FF6F0FDA2496412D0E17CC91B
-:103860001B4A007E5F93707FCB756CF21B90C7483C
-:103870008EB07C247502CB8B545F92504FA919A453
-:10388000A2C23BB48F74FF9910817D1123AEF50461
-:103890005D57D02B7BA85F5EEA003F5BC5721FF5CA
-:1038A000CBA1BC97FAE5F0DC47FD72780FF94850E0
-:1038B000DE4FFD7278FE84FAE5F0FE59EA9743F98F
-:1038C000366FCD7C4F2EEC1B9521BD782AF629133F
-:1038D00028BC5D8A4305FAB0CBA19A9A9B95C59402
-:1038E000A4FECEF514EE5FD4CE67F9D3F33D4FCDF1
-:1038F0006B93ADF13573FC7128BE362018F1350895
-:10390000791EE3FB0CA9385B84C5D9CEDE8F6EF43B
-:103910008371CD61FDF0F8E607B7FFE763EDF4D3FF
-:10392000EAEA7BBB3D25709E234ACCFBC7C6390F14
-:10393000637EABF7B5619E8C33EF6814D6755F95E7
-:1039400017EFFA713A222AC85BBB3F67F871767BA2
-:10395000DA78DAF59B8FDB1546DCB4C741307F3A65
-:1039600026507B02EC8BD6F8DCB71D23C7535FF7DC
-:10397000F0734536B9903A37C0E33E2EB066E93C65
-:103980009D02C707CF6747D158C2E27AE6B8AAA717
-:10399000348E87D53D5E1DED3A81DA7B68FFA991B3
-:1039A00020C4D136C2398134F37B98F37B5B9E13FC
-:1039B000ED8D8D790ADA497585A120B46FCF9B1101
-:1039C000349F1B30CE351CF2CD50064CFDADF79523
-:1039D0008CAAFF24AAAFB551F4B5E462E77ADA0FF6
-:1039E000CC56E0BC46B7777912FCE8EE6000E3EF16
-:1039F000FD793330AF27553F380BCF75485E660FE2
-:103A00004B4105ED6119E65F3E54DFA8D7EA6174CA
-:103A100042D919E38B6E6F2FD673C961BC4FC215A3
-:103A20006079772E95EDC7794A45A298E485316E85
-:103A30008B87C5A3BBCB232AC459BA8332E6E97767
-:103A40006B9588E7768EE7F622C39E08A11DF36F7B
-:103A50001CCF463FED3C0ED0DEEC447B2EDC92A525
-:103A6000C2D52F5E5F780FF073B7778302FB92CEDB
-:103A7000BCAA51FB3DC0E5F6C8FD568CA99B8EFD46
-:103A8000FE1BF4EBF42D57A15FC708E7915EE170D0
-:103A90005EA8DD6ADFC7A3D006CDF928F6A78FDBC5
-:103AA0009FF676ABCB079CB0EE9B1EB19E5F761067
-:103AB000769E6BCDFE75C8E73D7212EDA89E2F84F1
-:103AC000B4E7C2C66418FA2CE5DF5BECA002CE4F67
-:103AD00005FC3B901AE88B8A84D56E997ED85AAE45
-:103AE0004E5ACB33DFB4DB41FA6B60072DE6722F01
-:103AF00049E53D4B861994011FE158BC06E06E2252
-:103B00007D6D9027E1E071F2C55CFF2DE4FAD19B59
-:103B1000C1E2BD05CD1E8BFF49F8FD7F85BCFFA22C
-:103B2000BA43EB3A40C8860DBB4A43BFB5E8AABDCD
-:103B300035282E6DF655936E3DDFBFD0663FD9ED2B
-:103B4000AC1A7917E6E9E6DBE21AC67E2ECC13EE54
-:103B500039B08F7FBEE31AFD411E16C837E3FE174A
-:103B6000BC6F98B62F92134288E2291FCEE7507897
-:103B70000A6E21FAAE34747C395FF761788B5D810F
-:103B8000789BC7DFE57BD9BD5DF975525C2B86F369
-:103B90000E7D680F2C5A45E78376F819CC8331EAFD
-:103BA0006767F5F5C3BEE78E0681F9A53182768D8C
-:103BB000B1CE3BBCEC5C61D3E5425C84F6D1121C17
-:103BC0001FE12A195A5F8AA7E30C4F2CCFF0DA7A4B
-:103BD000EBF9C7269BFD62D0C342DBFB010FDB176D
-:103BE00037F8E083D96F4E1A47E1582DF4D6674C69
-:103BF00038777D69E20FC719E043F87D0C4B7D01F2
-:103C0000FE38A0FC50057E7F3E6BE0014249B229A0
-:103C100083C4EA28F1FDD433788940CB4B363FDDAD
-:103C2000D95D04C7BA079F0423CFD5B56F7EBDA960
-:103C3000ECB93B81E5001F07B616D97A9BEE83A14C
-:103C4000A8DB0979F360E7EA649B04B9B6A2BA2D50
-:103C5000543CD42E1BDA09A3B40B936D729A765E92
-:103C6000A31D45D746B8EF89CFCBC3BF8B1C1EF32E
-:103C7000F832E04DD5BC78BE7181AC425EC65F0BB8
-:103C8000C798B3CD3B42B639260C6F47C16E33E0BF
-:103C900017D3C31F87EFE6F11DA3C0FFB7C6C7D96F
-:103CA000FA73F2EFE70D1FADBE61CCC8F305B81C87
-:103CB000780F91E6154DFD6CEDFF14E3E2F20D0473
-:103CC000CF2FCA0E5D85FDBC72F5DBE8DFCB5975E1
-:103CD0002AD8019B6819EC804D7DBD18FF2E2FBDA1
-:103CE000B71B88BE3CE121200FA610356B0FED7786
-:103CF0008A2AC3892B225F7E4884783AB98660DE9F
-:103D00004866BF87DD1B547CE9C3E06F656529B851
-:103D10009F919135E36166F4B238B3017F46CDD10E
-:103D20005A88BFCB4D2424005C429CD400935D4450
-:103D3000707FC3A3EFBB0DCE1B1099E927BC3B07D7
-:103D4000F42A8FB78F652443BA9D6A13E6AFBC2867
-:103D5000631C6B2C5C0D4689B2BC3C7B1BC0531EA4
-:103D6000A11D08003F8B974D8988A104EDBFF22467
-:103D70006B47FE839D2BA1BEC99267BC437835E497
-:103D8000CA581E870F2EB5C6A9C9209D336D5FF98D
-:103D90001F8B1E8538C59861F29BF9ED1E0E67E6F4
-:103DA000491286FE030D56BDE1E179D71EDBBD3217
-:103DB000953E87F53E68BBFFF0AD30EA0117092953
-:103DC0004EB42F96A2DD60F8253BA022D8E34584AF
-:103DD000E5E7DBDBCF60ED4990F9292E0F51944ADE
-:103DE000FA7D8547C77C43172D533C0A4EA2E4D188
-:103DF000F7F9228BB7B4094486F2D07809CC337036
-:103E0000295FEA00FBE580321DEF4B33FCEA763593
-:103E1000847910A4ACD662371BF95EEB2B4AC6C27C
-:103E2000F7CC31A9B8930A74B93EB714ED687FCEC8
-:103E3000C0DF839CFD6CB37F81723995A39087713D
-:103E400029E523AF7B636C0E1DF77401D14CF69905
-:103E50004B8E629CCD757A9CE57DA2D57ABE5AF7D1
-:103E60008A75304E9197F1610D513BA05D0DB19E69
-:103E7000A3769DCEB3D8EB43FD175ADE27A85D632A
-:103E8000BEF767E4FE33885666EE7FC208FD4FB288
-:103E9000F5AFA6ED7FA8DF1C4BBF9D328BBFC602DE
-:103EA0009EB4F750567B6B4BBCD523EF0F5479591A
-:103EB0005CB32B18C5FD815A42199FD2CB155F1CEC
-:103EC00097D8F95E82F61B29B4EE0FD4723A162900
-:103ED00065001D5F215BEF339E4BECF71B5BEDA292
-:103EE0003720B845F125FAAA92B84FF0A957033FF9
-:103EF0006C24BB39D94A303E3D3763E066D807BFF2
-:103F000066CB7867E72CCC67467FFEEFB7542DE091
-:103F1000F781B2BCE680887809D78EC5F35B463F4F
-:103F20006127990872312CB23C08FCA1E32773F396
-:103F3000310FD13EAEFDFC7B932ECC2D35CD2B0920
-:103F40007985E6F1E615EC924CF308BB48358EC74F
-:103F5000EDDDD478632E6CBC233C9E658CD7B4C059
-:103F60003ABF26A78AF36BE27C6C8C7704E697064F
-:103F7000BF671D8FE74DA6C6BBD23ABF26978AF30F
-:103F80006BE2F7EFA6C61B7361E319719D2E6734D0
-:103F90000A7438527CC788EB5CEF7AD212D721E4DE
-:103FA000C97935A5846C1398FCD8E9ADD90874F1AA
-:103FB00051C3FA32D42BDCBEC67B56A93E5E2833F1
-:103FC000781B0BBDF136131EE1BC8D3E19CE49287E
-:103FD0004477B173133A9EA308E2F3216AAFEB98DA
-:103FE0005F5286DF1F6B0D617977EB2C7C1AFD9495
-:103FF000CD62F7815D3447486BB7BFEE65FEECB626
-:104000003CF586AF817EABF1B07CDF599711DD6462
-:104010004753C3FA009C9FEBB99E54808E9CB49D7D
-:10402000C11DA81B1387F5F7541C4AB6421C5476D1
-:104030006898EFAAA5FFFB0647BC4CDFB85CAC3D17
-:10404000B98CDD8BDA983A17D480F9478D0BB330F1
-:104050001F61D162DDA752BC2D1684D74AB9BE8339
-:10406000F350D7F1A5B6FB0B01D03C74BD02BA14D6
-:10407000877BE3AE2B7C798940FB0DFBAE453F236C
-:104080004C1B66D37EAEE3FAB6E6988B403C82CCFE
-:1040900077A2FC5ABCD8EA176C732754B073B65594
-:1040A00004481B6DB7A8C1FADDE5627C15B6DD0BCF
-:1040B000D378967B628C7C5B3B7EEC71D397BCFCA7
-:1040C0009E181E1F3D45CAF1DCB991976B6F6FC4F6
-:1040D000413700AF835C7532F9309C0F183C7FE4A8
-:1040E000727047EB9B184733E0CB97E302C8FB8223
-:1040F000E6372D79EF14B168541BFB0444DA538181
-:104100007AD8369F1DC29EBCD1EE89CA27F2EF072E
-:10411000CAF8DF331086CFFBBD61F39EF34A29490D
-:10412000C73F2C1EDC78580AB569437831F0F0BFE0
-:10413000CD47F773BCBF32EFE32AE607165AFE6E8F
-:1041400080717EEBDA545926B2899E17AE70EACCA4
-:104150005F1D2C07BA3C7A794688FDFD0B6E07255A
-:104160007E2D821DF4D7F7AF1759F29A79BF23AD90
-:10417000973D9FD2740E99A4F68D20FFA52D14446F
-:104180007B609D88FB1FF951968F07DF8F5BED5693
-:104190004B3E5E7BFFE302C40D1F80FC44D339BB62
-:1041A00082E63EA113ECBBB6388B4324683D0A7708
-:1041B000617342E8281FCAFBB2CBF5C255D67CC159
-:1041C000CE398BD53D1AE4D5D4F6C285609BB6B303
-:1041D0003897513F15EFE2E7511D244AE0FC85E492
-:1041E00065F1E620BFAFE36CF9BB9F8831B5B81825
-:1041F000F276E34A0D5DB7077322753E885F062AA3
-:10420000A3BB803EE510E6792F6DB9330C714235C2
-:10421000277D1C7C29B70F16FA585CE52D47A208AC
-:10422000E2E6C99CDA85BEEA34F55BBE85FDCD1DAC
-:10423000E11EFA66DECF03627A79B08C7FFFF26A04
-:1042400011EF1772131F9E577597F6CE027C3CB084
-:10425000664728DD39CB196A246286C75DCAEE0736
-:1042600020A46F36CC73D3E70FF63D4DE79DFDB923
-:1042700017E56CB6C4FA35B56FF6E50E6FFFFCA70F
-:10428000EC1CF2F3FCBE75424AAF04BFB1275526C1
-:1042900031B88FBD278B976302FB9E2AFFFB02F884
-:1042A0007B4A3D40A394F8FEE8FBE54688C3F60848
-:1042B0008413EB2B0B206EDFC3EF773F0CDF69FB22
-:1042C000B957BFFFF056D007339CE86FF6707BC735
-:1042D00080EF031FCBFBF9C0C7F87D247CDECDF156
-:1042E000E9057C06CE0B9F77A7C3C755017D33BC7C
-:1042F0007743260805C1FDB9720BE45BFF6B2B0900
-:104300007F8DCEE181D0BEC7E14C116D7F6FBAF6D3
-:104310003FCED1EF8375F2AE3E8EF3F3957A4380B4
-:104320008A4D3309F693068E07D2F563AC6B288B62
-:10433000C93977267B6673FB5272258390BFA056DE
-:10434000DD7FB34AF97E63717249BA38F1E37E6664
-:10435000F7678D10174F70FC5E991D7E12E0EE50CE
-:10436000EF457FCF299030D4DF346B8008A676FFED
-:10437000E567F8A670FF10E076CE66F756FB28DEFC
-:104380002141CE57C5E0DFA41D2590FFEE0B1EC5D1
-:10439000BC565FD500F23B8AC27C4657E00F2ADC50
-:1043A0007E4BF8FE7B01D04DB664D0DD37BB806E0E
-:1043B000A4A1F29550DE95CDDAFF3FFF37BBC05F79
-:1043C000DCE9A46D400EE63BD1BEB1CFEF250EAFC8
-:1043D000ACEA3F87F90DC3A76BE0E1ADB47DCF44F4
-:1043E000767FCB5C31B9E4AB4097577BD13EA3EFEE
-:1043F0009798EF1F3BCDE9ED34F7E77B3E55F0BBD7
-:104400007D3D46A2D7810BA7D78111E8F5988D5E37
-:104410003F26E9E9F59D74F283D2EBBBD0DE8E171F
-:104420007B5922FA76D857963F5BB01BFA93BF347C
-:1044300067FBD3F4297DB62586AB19122CE7998743
-:10444000E47DE4135FEED03D03C6DF2DFA27208420
-:10445000DC34FDCE9CB11DE4D839F42BFAD3F49BA7
-:10446000F43178E75EED8DA4BB376E8F9FE5C7FF13
-:10447000C8CFEA8DC4376FF9597ECA487C73D09F84
-:10448000E29B6C80E36C7CF311AF4FD721DF7F4E52
-:104490007CF36D7CBA4B19DFE0FC2F1DCE3724B6C0
-:1044A000AC0BE4F1C662C61797DCB306F922C54728
-:1044B000B156FC2E0D95517E1B7CF4E93DAD58DFC5
-:1044C000DEDE3FC23D819529FE0F57C03CF44BD440
-:1044D0000E763E6900CFE1EE2283FD2ECC13667985
-:1044E000B99E584C67E64192C07D1297723CEC042D
-:1044F0001F0DFCA0193C9E2527C922DF707EF655B2
-:1045000025AACCF7BE1CE1ED3D99E11A187F1719D9
-:10451000C0FB9A465AA7051CDE33D9FA027F1A3A25
-:104520003F9B1E5AE967E7E556F27EB23F57A2600D
-:104530009FDAF97DEE9A9FBCFBD828FD34F3F61183
-:104540000EFF05F07FC49F867F29FF2F83F726FE8D
-:10455000AF124AD2F27FB33FBDBEBAC9FFB7E5F78B
-:104560006FA6E3CB463FE3F7B3E17BBF9FE9FDFDD9
-:104570001C4F178AEFFB79FB7B2E1CDFF78C80EF3B
-:10458000ADE788EFFBD3B5A7F8FE173FCAFFBD081C
-:10459000BF4FF362BCBC7B26D92794A485E3BBE65E
-:1045A0007E148DF54379EA6381D2FDDCCFBA43E90D
-:1045B000EE45A2ED1E4BD76E815F3592CFD7E1FD60
-:1045C0005F5FF2E2BE02D58F4FFC8DE9E047E9E87C
-:1045D00060AEC8E490E2BFAC0BF4FD5FD1FF817424
-:1045E000FDDFC5E5FAD9EC82D786EC825FF8AB87B0
-:1045F000CBBF5DFC7CB2AC46927E8CDB0F5C05F2DF
-:104600006AE71DD902C4BB0AF584007EC2CFB91E79
-:10461000BB022E0DAA1E6AB7534E08F0773A7646B3
-:104620005501CE4B99FAFBCFD1FAB3C341E1FBADB3
-:104630001FE59DFE3B782EE0F33B5F3BA93F5BFF10
-:10464000BD1FF54FF81D78EA93AD72DB988718EE21
-:104650006579B6B3D2FF5DCB9FFB64AEC7C227CDF1
-:10466000F2FFDD145DB1FECE57FF50F83EF333BDCF
-:10467000F2453AF8EC78391B9C17F965434F39330A
-:10468000D3E8297B7F869F6DAC135C8B618EFBE446
-:1046900064A6F47736F4E7ED14F11C552397278DC3
-:1046A000B3B2B8DDAE7AA0FF07781CFE8155F7D60D
-:1046B000C0BEFAAEBBD40A40417E33D37BDAAA71C6
-:1046C000185F2DCA142CF933C633D5DED97711FC07
-:1046D000BD083A6E318C7BC51C9200BF3113EC06CD
-:1046E0008C57A8F8778DB35DBD4188CF6E127A974D
-:1046F0002C07BD7A95979D8B092E3ECB7D991B2C5F
-:10470000744B825567A9DF86F5D58C5EBC3FE59C6E
-:10471000EBBB7AD3DA59B599A2E14F5C9E593D0AB9
-:104720005E83018C7B19F81D3E0E5BBF9A705400AE
-:104730007CFBAA041552EF7C944EC05E124B9398FA
-:1047400037754D15A31742FD92D1EF5FD968C0159B
-:104750001E75BDCF112EA3DEC8E3F17AB6F316A9FC
-:10476000BF3FE665720C2BD2F2878773D2EE2B180F
-:10477000CFAE5655872B923F54B54CFCBB1DA9BC00
-:10478000EF507091EF7FBEDED0BCE22C3E6AAB9F53
-:10479000BA7F24A8A0FD877FD7C344479B3299DF07
-:1047A000EACC0A7F2B13E56508EF9FA5E518AC0757
-:1047B0005168D987E50DF85D4D953BB01C64F589CE
-:1047C000AA9E13DE69BBCDD84E4EF5D383656F6AC2
-:1047D000DCAD386E2055DE86E54256FF5CC71976A3
-:1047E000FF4A52C2F97F2CEB99B06F7A7DCB5731DB
-:1047F000BE7443CB4DF8EC6E556B204E67DC4372B4
-:10480000FD0D5F55C19FBEE1EBF7E1BEBED1FF429A
-:10481000F03B80FF35B91EEC2567B1187EC43BC460
-:104820007F43707460B95166F7FC2F9C75B2A7C3C3
-:1048300014BF53E0EFA5437E8D66BA07830CC9C34E
-:10484000EF09FAD399E741CFC3E749C8214ABF1F0F
-:104850007B4BE331A4E75A351DDF18F31DA97F63B5
-:10486000BE23C91B036F297A2AE57F5FD716BF7461
-:104870004FACC3FC9F850287D3C7EF8BE4F51AE9E1
-:10488000387BCB912E34A0DB46EEDFD9F58331EEB9
-:10489000F784C8EB801F8813DF55391CBFE78A37C0
-:1048A000A3FFB19118817BB93CE504F7C5023E63D3
-:1048B0005F9DC9B56F7B8D720C934BC2A5BD28E778
-:1048C000DC9A21F7989E5433FA74B1828EB3F5CCFA
-:1048D00095C18B200F3412848B0869F905B8E7392C
-:1048E0005B6265123BF3C2A142D007EAC54288D29F
-:1048F00043C7E72F1C2E22ECE822FEFDF4CF5F40D9
-:10490000FBC228C385BD65B4EC4995752548CB2508
-:10491000A9720CCA3BB9DD7766EBE72F74A03E0B9A
-:104920007F6696AB355CAE9EAF3CFDFFDA45D4E9C1
-:1049300000800000000000001F8B08000000000045
-:10494000000BE57D0B7854D5B5F03E73E6956426F3
-:1049500099BC278190131E12157012480848DB0974
-:10496000AF862B8FC1074609304978846700AD4E6A
-:104970009596810082628DAD0FBC2A0E16BDB6D50C
-:10498000DE68E92D7F8BFC83A0424B3156AB684536
-:10499000A350A56A4D04B98E56CBBFD6DA7B67CE3D
-:1049A000399909A1DAFFEFFF5DF874B3CFD9673FFA
-:1049B000D67BAFB5F69EB367E1CFB7183B6B2A192C
-:1049C0000B3396CBD80E6D8367FC28A879ADBE213A
-:1049D0001A635BF05541BCDD051E3B63158C3D98A9
-:1049E000197479A09CBEA6CBEA8476CE921C77D0AF
-:1049F000C558B1F79370357C5F3C8E310DBF1D9C5F
-:104A0000C5D818E8D77BBD62CF817218F3288CDE39
-:104A1000ADF740FB1C3763ED50326B84B1618CDD28
-:104A2000E59275980F9481D208EB80E7A91A7F6F01
-:104A3000C13A3C571D6C651BD4D34A993F02758F10
-:104A400083CD0BE0F81E0BAD63844715A542F3CD73
-:104A5000F06E601AB477D658FC112833B074E9D7D9
-:104A6000BF81DA8DF058A994F0989213BCC8837076
-:104A700061ACA60DE7C5A281525847EA853959B7FE
-:104A800042ADBAD47A3D83211F5ACB02F36D8C55C7
-:104A90007A0229081757594E6A7018D5CBF07BD780
-:104AA000464B98015CAA993BA294C4E102334F0D96
-:104AB000B893E3E395B5C1C0445BCFF7B29C758D65
-:104AC0001AD0AF439613110E308F8F6AFF7C0F2ED2
-:104AD00067B9B3CBCE06023E07DF19602AAE47A303
-:104AE000F7CE5D33A3FDE0FD8ADDAB18CE777D5AAE
-:104AF000FA38C4A379DC57BEB8D71380F7299F3999
-:104B0000026D09C65B22E0FCF2DA5AFA0EBAD7ACA3
-:104B1000798CCDC3A50C6484D00E27964C39EBA0BC
-:104B2000E5BD3C18DECF659C18AE0CD44F6300D7B2
-:104B3000865A95A925F85D777B7616EA733BEAA736
-:104B4000B2115009D94EE07327FC3D0BFD0659E622
-:104B5000640F3CAE0FF3E7D41EFE5BC07C9373E1A1
-:104B6000BBC6CDA6E76F4CF90B4BC7F7D6131DA5F7
-:104B7000F1FEAFAEAD0F4C14ED4ED3FF23B49E2B20
-:104B800035E647BC5DE94B8B8461895705AE094C1E
-:104B90002C8DF7F7EA97EA3C848B191EBFEA86470B
-:104BA000203071484F78340414BB473B375CFA0A15
-:104BB000877A6BD9E45CAD271CCCEB0788DD8E705F
-:104BC0005E0070BEB524393CA01DE1E3D56BA01D8D
-:104BD0002C65B23AD566013834CE54984321F8A6F4
-:104BE000B341D8CE3F75926EBE66389AE1D5F8349F
-:104BF000F345A1DFC6BBDD3EA070F607099F280084
-:104C0000AD12E4096FAA5FE73B387F0FFCC5755E04
-:104C10005E55F66C0ECC23B841F131BEDE77F4EB75
-:104C20006B60818CA842EB7E2709DEDFD1AFD33CDD
-:104C30003FF3FC53505881FC0BBD51F28303BA760D
-:104C4000CC1A1D1618CED8E31E77CEBB69501FC1F3
-:104C50007C6781AFCEB0711923F1FDE01CE26F33A8
-:104C60005D7CBA56FBC1019B9ECF399DCD0BCDEC2F
-:104C70001E17FB5758B0BBEE013807AE516FBF0A85
-:104C8000FEFDCAC1EC8DF86CB557D54E6423BC60EF
-:104C9000BD842F3F6392BE1896E17D2AC06F2673B4
-:104CA0006A2EE8E75B20A4CEC25AA6FB5334976E67
-:104CB0001DA75A951A94A380BC8C2B87C7D76B9ECF
-:104CC000F76AAF9DC6037AFC444F8F66B8BC523B6F
-:104CD0002803E5C80B71B88C381FB84C42660678BB
-:104CE00078B25954013C7729CEC8C330A7BAD0CD89
-:104CF000818923112E2C6C07D179C25342F251AE17
-:104D0000DBC6E49F950CE5699D9D05715D6FD858E4
-:104D1000ED932E2CA345E53AB9F55E76F50994D3CB
-:104D2000B25E17FA3EF50F84487428E979AED315C0
-:104D300055391D7ED84D3724CFEA3CEF5E4C786262
-:104D400067619D6AC6320DD7ADA6A58F60198C6DBF
-:104D5000C626B04E7B66A00BE5BF9A362082F4973C
-:104D60007ACD8F37733CFEA866960E8F290B7E1185
-:104D7000A6CEB52C03FCD304FEAA05FE524A9D66BE
-:104D8000FC31E4D370298B3CA2081040FDD4607F35
-:104D900004F93699DE90F84C29B57EDEA1A76BD6D2
-:104DA0004AF097786407467521BF06BD56762BBD3D
-:104DB0002F25F8043D123E5D36D427F342B653FA50
-:104DC0007E8205F323EBF0BB2D0E1F3E6BB068799E
-:104DD000D80EE0E4413DCE4A7D3EE41F1686EF2426
-:104DE0003D215CD198D0F5DF016B2828C7FE407AC1
-:104DF000E2779B75E30CEC396E375F99FB357DA745
-:104E0000AA603F901DE1F3F974F2BB2493DB0FA776
-:104E1000BCA3DA2C0393C3AFC199EDB766C7EBEF20
-:104E200014386B2309F480EC4FEAF32C35E8B5E035
-:104E3000DAC23B0F1E18877AD873114832769BED81
-:104E4000A183078B1892086385F8BF870EFA5D640B
-:104E500077883A1026CC7F476A77DDEFF4427D6091
-:104E6000773D8CF5ED301C1B0B764BE6430737C0C6
-:104E7000F79F1E7390FE3A55931A41E6C90E4D6096
-:104E8000C761DE5630733280D4A00863E90CF5A305
-:104E9000F52856801CC03B5BF32908EFCB3335A2C5
-:104EA00007ABC6A26E985CB6D5A720BC7E68674DDE
-:104EB000426E5C385367BF5C9EC9ED0E398EC3C924
-:104EC000C229E5F17E19F3AD433D629DCA48AF00AA
-:104ED0009F93DD26F95BF6333793EBCF6EFE3C37BD
-:104EE0003FCFCD4CC0CF872D2BDFFA1EDAB3BF5595
-:104EF000D923B09439DEEFD2F359A1462AAF092D58
-:104F0000A6B2498CF767166CC27EDA6B5F9A732380
-:104F1000D06FF32E870FD5F2F21BFEF2830A0DE15C
-:104F20000478C7EF1634DE5D01EFED432C64CF6EDD
-:104F30002E62B5484FF6750AD9475B347BCD2E28D3
-:104F4000EFCDA8BE2733373EAF7B3326529DD568C1
-:104F500016A4F3D54E4EE79F1EBBC5DB8076A5CBCE
-:104F600045FC625F57728705EAEC10CC9BA1FC60A0
-:104F70006467A80E5E6ECEB4123D6D16F415167001
-:104F800077C610C99CAE57C2F84E6B98A19DED8CA8
-:104F900059E9B95D81F925A053D99F33064C3A12DE
-:104FA000C7337F6FA7E7B82EFC5ECD6606BBE7CEA2
-:104FB0004C6E37DFD93D8F343E8F6C733FE9FCB9BF
-:104FC000E03FF33C3EF04CB81BE17F6F86FF9E4C08
-:104FD000B2C33B6C28CFE7BA7E7B5419D11779DC7A
-:104FE000A1A03C9EFE85122D06F8A554AB91F52597
-:104FF000A8D73CD346011DB06A9B0FE1D93E38C704
-:105000003D5037FE6302FF2F5A3D6E9C676012D8F9
-:10501000D544DF2CF74AEC67526325977F6070E92F
-:10502000F4EC8BDACECD0351FE866DB45F9AE70CBB
-:1050300047707E3ABB4D39CBE5B266AD8CDB7FF372
-:1050400026AAFE94F49EF61D6C430E90FD2765790A
-:1050500018EAF0DD9BA2FAD6C4D357E1323A98C7DA
-:105060003E506F0FE26EA912ED1BFE675EC868F737
-:1050700099EDC286AAB2E7000D009748CD28A4B3E7
-:105080000B2D44677DB59701D39C5E26B578705F84
-:10509000F5A09013D3271E9F887263069856D8EF09
-:1050A0008C89AA270AADB7862CCC0F133FE2572371
-:1050B0000AACED4869C7A16F21DCAA6C1AE9AD52B0
-:1050C00076FB1539F87EA407E11C107608B4E7FAE0
-:1050D000CDEB8C0C8167EDFEE3AE461DDD1DA93ADC
-:1050E0007E21EE5740EE3525A227C6D6D1BC0EDC78
-:1050F000944AFDBC75971271C0FC27A95FFC7E34F1
-:10510000DAB3DFB3F91C1A2DCB82789DEA6362E330
-:10511000EA774DD2D901C759A092ECCAB263D50E35
-:10512000B45F372AC4A712FEF342467B33B812ECB1
-:1051300032ADA77D0A9DD9919EFB6A9F9AEDABCFB8
-:1051400033C1AE023A67E5AC5C6F5725D353D2AE9C
-:10515000B232BF92457AA8C38A7A773A3C4824078C
-:10516000AECD5008AF93D40F093FA7AA540DE175F7
-:1051700024F4BE0BF7E347BE50F93ED89F6BB0E373
-:10518000F2B3B85F60BB1D0C32F86E7BA133B20E78
-:10519000BADA77D345F91D841FEDDE7188C7DFDAEF
-:1051A000480E279BAF3BA4B2C14098D3420A951248
-:1051B0007FC5A11466D5E987629678FEA5597CFE65
-:1051C000B96B9845837133C3CC9F687F2CDBC1BE1C
-:1051D00078B29551FB6826CC6FC5600BD1A7DC1F58
-:1051E000A7D8C2FE7EB07EDB9E5561DC2717C3FCCC
-:1051F000701E1ACC0FF56549288DEA0343D9540E69
-:105200000A65523938D48FDE0F090DA2F282500997
-:105210003D1F1ABA98EAA5A191545E182AA3F2A2DA
-:10522000D0A5545E0C7A13DB0D0B5553393C741921
-:105230003D1F11BA82CA4B4233A9F48566D3FBB233
-:10524000502395E5A17A7A3E32B494EAA342D7512D
-:10525000BD22B48ACACAD0CD548E0EB55059155A43
-:1052600047EDC6846EA3FAD8D08FA8BC34742795B6
-:10527000E342F7D37B69B7A40A7EBC4D9BEF417F25
-:105280000750B886749C8CEF1665713DF042A67F7E
-:10529000465645BC9DDD027ADCD5B35D6316D76307
-:1052A0009988D704FDCDCDE2F2F923DF3BF70C65F9
-:1052B00071BC6DF1F6EECF60A589F71B71F9C0D70F
-:1052C000373D4BA372BBB5DDAF22FDAE64BE303CB3
-:1052D0009A36EA4505E5CB0ECD5A93C8BEBB37CB0F
-:1052E00046DF3D98195C81EB4C2B397100E5C98C88
-:1052F000B0E7F7E3915E86E5FC763CF457BCC1422B
-:10530000DB7D8D79F6A17F4D9BC8482E4ABF12D810
-:1053100075067D7A87800B636D0707123F0D2EE7B8
-:10532000FAA7630AF297FDA681B47FDF6E8F2A5633
-:10533000B46F5633A6B7FFB76F6A7814DFC7FBB3F5
-:10534000D33C8B37B367D0C42E69D5C6A740396824
-:105350009BFF9914F8644824383E15EA431F0B3F1D
-:1053600083E5856D91F169505EBC3BFA0C6EE38676
-:10537000473BC6BBA07EC941B61FD9BFAC5D9BE011
-:1053800086FAC8A3FEFD4006ACA22338215DC3F90E
-:10539000445AD2613EDBDF04430FEA551FB6AAB080
-:1053A0001D8AE31FEC38B4DF245EDCA3DA2766C372
-:1053B0003FFB5FEF2953F17B6B474AE6B09EF8D97C
-:1053C00081EBC675821E7904D6D5DF1F553C3A3A6B
-:1053D000F98DE067C0C34328E7A45F72C7862CF24B
-:1053E0004BEE48F554E3905D9398E7610DE9D84A98
-:1053F00070B26F1C48FE384977005F833D7B87A001
-:10540000BBEDDDF66E62F8FE46C8BF7F15F8FE5BA9
-:1054100016E78764F07522AD8C39371F1F167C099B
-:105420007C7C50CFC7E6761F0B3899E1BCC3C20E17
-:1054300082AE8271814E395F31F4A37D28E8FB5C36
-:10544000707DF75F8C6EF70B39910CAE4CCB213928
-:1054500009F47A21FAC792C91BBBD8CF98DFFFADF8
-:10546000A79CE37E5B0FC8B941C9E5DCF302DF49C5
-:10547000E597903376937FC799CDF9A6D213B0679D
-:105480005724F0537B730C7EEAA9AAA71AE50D1BDB
-:10549000CAC88E4E1B1609E33EA538AC95ABD80C96
-:1054A0008532C2B1B094FC0F2560675801FFD0551A
-:1054B000144BA7E6B134A0FF5DF29BA7DEABE73744
-:1054C000A9EFE3FC28E9226BC7ADDC2FA9CD04FBD3
-:1054D000E5DBD9C2AFDFDD0FF7836CFA6EE18E5BDF
-:1054E00075727087D74B75D93E19FD2E10EF776C0A
-:1054F000584FF0748E4B6C375467F3B8C2767B9775
-:105500001FE93CFC4DE6417B2673C33B249F32419F
-:105510003E29249FF8F8FD43A98F86A1EECFCE1334
-:105520007E004FEA2CF7FF3B7ACE459B0AE5D43844
-:10553000CF3E15E334A08734E4D37130F751082F00
-:105540003BE15D631C8FDA381641BB17E016C57D61
-:105550007BD8E2263F93DDDEEA477E66F64C5A7F33
-:10556000A5273823BB17BEF0A4696588D46076DB15
-:105570001417D0DFA6124F2AD6E7407D6B158C9BFF
-:10558000D5C1447D8B6BCC3FEEF708FEE8E787364C
-:10559000C078FBB2FC73919E81AE8358FA877AACD7
-:1055A000E4AFF6F6CD1E90FC19E7274F99E4A7FA71
-:1055B00061240F9760BFB2BF64F6CDE06C2EE76E3A
-:1055C000166532FB46D2FD79DB3762BE8BB37BE7D3
-:1055D000FF570EFE68DB4EA6F33716DED36ED5D02E
-:1055E0009FC1FD3416673BF5E716FE463FFA1B8167
-:1055F0000E9C83791DFF24F21727876384E623FD21
-:105600008CD29F982EE88A599508EAF1F42A8FB532
-:1056100081FAEB6097437FDBB2B9BE917C8D72EB70
-:10562000A9612897B2ACB85F477F923B2BDE3FD68B
-:1056300033CAE3F289897DDC7562CEADEB7D19E872
-:10564000720E1FE17E94D6EF73BE9CD69F45D6A303
-:105650009CF033CD03ED5398FCE337F893A77EAE6F
-:1056600000EF821EFC5CA55219CCA26ED8EF4DF360
-:105670002951DC07DA2DCE08EAD2EA4227C3F8A680
-:105680003DDD12C1F888FD1D85D6692F4F8BA0F036
-:105690009B5858958171CCD387F7BB8209F07F75F1
-:1056A000B0DEE0FF32C3B1BBDD9C673D08C7FBCF76
-:1056B00011A77D3EBB3B4EBB0FF972FAFCAE0D76D7
-:1056C0002D1EA795F1C702EFAE2DD5A8B29671FB9E
-:1056D000B49045D6E9ED2A5D1CF477D8CFFDF138BA
-:1056E00068FB05FA386873E11EB477EFEB8E83062A
-:1056F000F712DF65B79521FDDEEFDBF5933B109EDA
-:105700000E11AF1879CCA5A19FBE627F2EAEE7F730
-:10571000A6F9CB52FAF1CCFBE03F651BE30BA77D6A
-:1057200057644489B6B213F2B7F42FCAFD30FA0FAA
-:105730003D09F9D0086F397E9DC2F7B5CCA670F946
-:1057400027F428C897BF921C8830D29B7E87F230FE
-:10575000EA9BD3BE913E8A7B269137723E00C721D9
-:1057600089E2BF305EC238AB2387EBA93A1BF79BB7
-:105770002AAB2A56E2BCEADC2EC5A1F3F79F16FA43
-:10578000CC1C175233BEA8080ABF77A2F59BE33B97
-:10579000A7515FE47278E9FDE4E782D7515B2BC53E
-:1057A0000F8F2E50D93AEC27383A9F25F85E96AFE6
-:1057B00023DD0C61EC18C2B84287CF24F1A2A36BA1
-:1057C0009B28CE6C8EA775BFAF4FA945FD5D8B7032
-:1057D000D48D5B25E0375394CC11D43CF0DEDE70E1
-:1057E000B78761FC6BC827156137FAC5BA7E89F1A6
-:1057F0000BF63D37F92B6AEBCF54AC1BAE83671524
-:10580000E3F1D9FDF77934785E3B64436ED8951C9B
-:105810008E3373381C6FC30763C81F333287FB375F
-:10582000FBE48F61C3785C88ED4FA1F869CA1F550E
-:105830001FDA0D382ED703DC9F7CBD889B98E37858
-:10584000B5A11506F9921653584417BF48B3B6913F
-:105850007F362D66A5E7667ECBCD31F29B847F3205
-:105860007C4AF89B9FFB72F87A8ED62FD6D06F6851
-:105870004F4D6C07DF22DAC9BA391F2159DC7DBED2
-:10588000C0EBE9E0987CF457D5DAC343FAC2E712DB
-:105890003EE7CA739893C3F5B8FB9A97441C4FDD53
-:1058A00080BD49BD9A66ED3D1EEB37C563D346F515
-:1058B00088E7FD53E2B1EB7284DFF03CE3B15304BF
-:1058C000DD9E2B0FE56ABBD1EE91E52C81C7D3C1DC
-:1058D000141606F9785DB54A7128A00FD28F47EFEC
-:1058E00056C8DE8CD63B482F37D6A7907FB6B14C32
-:1058F000A5F78DB7ABA43FA3201F96817CF8BD9080
-:105900001366FF6C35530CF1F3E9A3520CF56B16DB
-:10591000FCE8F76BD1BF5C65D370BC231AF73787FF
-:10592000FD2AD9AFD0872F8AFEE9BBBEE1437D2691
-:10593000E9E1885F257E0BBFACFA70D876E18F3E37
-:10594000B2B92C82792A4C89C7E9B541D87F23C5E1
-:10595000815FF36EA33867CA97F70602B47F0C6ABB
-:1059600065A43779FC3445F0E984C2AA59A8C7DF99
-:10597000DA6A63E8377A6BCD69E2E78EB52B292FB7
-:1059800042FA97A57FD8EC6736FB977BF8954DFEDA
-:10599000E464F90CCF26A10F29AF92D10788ADC3DB
-:1059A000FF881C93F2E375B1CE0985DB6E5F07704B
-:1059B000489BAF121C245DBEF6C52D0FA21C4E01E4
-:1059C000FA58CF109EFFF12CEE43D86225A11FD9C3
-:1059D0002DE53AE64F94C6F1724D7071771DD97F6F
-:1059E00076D32A43DE8759AF24976BBDCBAD3B728C
-:1059F000B8BFC2AC77CCFCF075EB9DDAFABB4BF1CB
-:105A0000FBDAFA05112CB7143A9B50FE9AE583593C
-:105A10004FCC32C9D9B87E505964A47EDE1AB58BFA
-:105A2000EB093BBDFF3485E73B849CBCBC3135FDB5
-:105A3000612C3F4DE1F90E61340AD14E7D332DD2F8
-:105A400042FBF295A3914E42CCD711C6757A53C949
-:105A50008FD0DA9FB753A7A472BBFC4035AD5795E2
-:105A600086F9866AE29B16B19607B28345B980E74C
-:105A700016BF2505E30B13DCD643E87A691D6F6179
-:105A80000E1687573C2F847914F89EDE29B8FF2C18
-:105A900073DA07919D3A2417F1F17DD81F02DD1FBB
-:105AA0003EACEEDA014B3DEC1B9991C84EEFD603AC
-:105AB000A638F2B1EFBC3A00F9F6CF2CE8CBA5F846
-:105AC00071E3ED181F6EDEAD527C69CE0DAF5D4007
-:105AD00076B7294EA9A63B4BD19FD2A2A4FA509EDD
-:105AE0004838EE73DB49CEB41C4BA3FD44CBDB8AB4
-:105AF000A8BB491E4AB81F807605A33057C94D720E
-:105B000053C21FD6E5C775493C54B3E8E171255F20
-:105B1000695D97F5BEAEFE1EB20F90CED4F83A5432
-:105B2000B795D6D7C9527D38BF90F00FB137D2683C
-:105B3000FF27F1DC2CE851E27985C073E79E333F03
-:105B4000B814DAB7FAB328EAA016318243E71B6E1D
-:105B5000A2130907B96EA08B20CE53AE7BFF9E9196
-:105B60004783F87D7A2AC5F1A5DD2DF30ECCEBAF86
-:105B700013FBF7A5B94AB7DD8BFE8BF6ECF14B733F
-:105B80002B12B417F62EC07B05C2BBDAC33E89B018
-:105B9000F83E2F597EC34DB946BEEB437EC34DB987
-:105BA000B93DC7FD0AF8DC88FDF5159FCD56D766CF
-:105BB00025230E6FB96F2696D67AF2BF99FF243E41
-:105BC000943DFB3EC338BE592EDCA8AE640A8CB3AC
-:105BD0006938E74BB68669941F64E29773C91BC0A6
-:105BE0007F04F1944CEEF415FF3FEB89FF9FF5869F
-:105BF000FFD6ECC013084F1CAA5F39ED0BFF13DB77
-:105C0000A33CB10FA4F1886EBB3219E5B3C9FC18EF
-:105C1000391F9927B317935673757938A53E05F543
-:105C2000441FE863AF7E7E5F037D1CEA9DDFA3C453
-:105C3000A7CB05FE97CBBC8C5DBDE765F4017F4724
-:105C400013E1EF46D5D7152CE93BFE8EF7C4DFF103
-:105C5000DEF1177C17F1D762679F90FD5E55EF4527
-:105C60007AA9F4F82FC77C9DBDEB84DC2901FC9553
-:105C7000A0BDA4925CFB21BB88E4F6372D169A6F79
-:105C800027C8EB87953EADF3BF73C94E095BB3A040
-:105C9000DF1BAF6014DFF36AEB14ACE76BA0A7B5B2
-:105CA000BEAF57C9EBB15E25AF777965CDCB25FA8D
-:105CB000BC1EE9D3A979ACBDC92B4FDE79CB2B4FE4
-:105CC000DED72BAFFAE59D875EED03FC87E0FC9203
-:105CD000C989BEE681029FB27E593DC7879D2EC508
-:105CE000D5AAD39D5C6F3FA9083D5E16A4BADB49D7
-:105CF000C2E280D0F3A776F1F7EAF8C476E588BC73
-:105D00002C9EAFD0B62A6035E49384E9F91DFE538A
-:105D10009EC12AE669BB683DD9D3B81F52AE5FE683
-:105D200069A78BF56417F175671FE379ED125EE9DA
-:105D300062BF91516535EC2324DC6E54030AFAD11D
-:105D4000337318A649C03E6198827EAE4CBFB1BD88
-:105D500084772EDBFAB18A295F35C6F7B9B89F1967
-:105D600081EF75CF13EC5F013FA5983F764D9EF014
-:105D70003FD89917F51153EB7AA523DDFE249847F8
-:105D80007197DEF7270BF364BCDDA8F7DA525842AF
-:105D90003FC327821FC05E217FB32AF4DCC48E126A
-:105DA000CA7759EDD6C8FFA0AA3EE7D4929EDF6716
-:105DB000FA81BD75F0C8AE49659ADEDF12C832D4EB
-:105DC000F36B0B0DED0B82030DEFFB355D64785F1C
-:105DD000B4B2DC502F0E8D35B42F01C0EAEB833600
-:105DE000FF9BA1FD90D6CB0DF5A1DBAE35B4BF3046
-:105DF000D260787FF1634B0CEF87B7AD36D42FD9E3
-:105E00007D93A17D8BF0239BE1F2AB3CBE7F6BB118
-:105E10007239B4CE554EFECD1697D1BF79A7807F8B
-:105E200075C6B852F4ABB7BC53568AF03E903E9656
-:105E3000FCECC9E8C22CD792C953F3F33631DE47E4
-:105E4000CFD82D48D72BF603DF5E0275D7EB9B70BA
-:105E50004D5B86F1F8AC8DF17C2119AF91DF77C7EE
-:105E60006BAC3EEEAF4D77B15B13D0C59D799A51C7
-:105E7000CE0AB929E92819DC243D9E0B6EBB057CAE
-:105E8000BF2ADCDE5078BEAB5E1F3C99605E1FE728
-:105E900059447C39F8873C6E0F8D4A254BDE43FC14
-:105EA00078BEFA40CE03F4C131AE0F8C79BA1FD55B
-:105EB000BEB4F05E0DDB2FE4ED2DBE52C44B327F3D
-:105EC000FAC7026E3A7F7A13F7A7A71AE0F696E4AC
-:105ED00077935FAF25FD73F2A7B7D87DA57DF1A7B6
-:105EE000BF05DF22FC77E771FAE8C6AFF0C727DB12
-:105EF0004785183B84E72198CBAAE9F74DC9F6C737
-:105F0000529EC3FEB814E3B4ADB8FF5212EA414743
-:105F10007E05ED9F491FB4821E74909F801DD2A004
-:105F20007EE3040BBB558BAF5BDAF30EE673DA55F9
-:105F3000C2AB1BBF67DF67D7A7A85FCB3ED39BDF92
-:105F4000EBBEC4AC67CF19EF233B6D1AAC7FBD6EBF
-:105F50007F2DE1638EEF49F84CF3F1F8DD46D08FE9
-:105F600018DFDB97CBF5F446D87F231C3DD901EF32
-:105F700000B4E7E1F9C3888EDC4AE21F0957739C3D
-:105F8000AFAF72676C7E0F3B6E6C7E2F769C5CFFB2
-:105F90006AB17F9EA40E6B433FE6A9989DE0A632AE
-:105FA0009E77D97CD0C62284479EBF2CF1688B6D2A
-:105FB0006A47FD6C63E67C652D03D76F3BC8CF89CC
-:105FC000B11CFE3ECC9CEBD0EEC9A832EAAF4CBF70
-:105FD000517F65D76499F499517FE5D71AF55741F8
-:105FE000D0A8BFFA35959BF499517F1587C69BF4CD
-:105FF00099517F0DDA7CB9499F19F5D7D06D46FDCF
-:106000007561C4A8BF2E7E6CB5499F19F5D725BB15
-:10601000D71BDE97456F35BC1F79F087867A45FB25
-:10602000BF1BDA2F3AF40BCAEB197DF46143BB3185
-:106030001D3F35B40380B763FEF77C420963979E2A
-:106040007CCAF07EBEB0D7BED1F56B433FAC95E7BE
-:106050007187E12FE2EB3D16B4A39162655DCFF548
-:1060600003BCAE8828BE28345BBCFBC94A9CC7076A
-:106070006F4E3988FD2CDA66CCFF5E1C31D69BD979
-:10608000C00C940BCD401711A093A59817AE936F39
-:106090004BD94A712EB06F74B6E8D0158CF249C353
-:1060A000FE76CC7B97EB94F4E617F426E727D7BB74
-:1060B00014ECBFA8165FA71FFEF2FD66871DE976E8
-:1060C000E16E85FDBBD2733D4D7BEEDCD42FC1BAB2
-:1060D000CCEB30DBA13FC937FAC727A92E8A179C22
-:1060E0007A59F5717FA3910F571FE27182D54F281E
-:1060F000E4AF33C343DAA7C9E0A286F9BEA139876A
-:1061000045223AFED3043C1C5E23FF9DC27FE07C07
-:106110001E5023986F94A2A59AE9AD32CA7AC2396B
-:10612000ADD4C8A76638BB7D8509E94A83BF388FDF
-:1061300085E2FCA199AECC705FB1FB4E3BCAC3F3C4
-:1061400085FBD1FCC47109D076A3EC09F2EB245C89
-:1061500061DFFE26CACD64FBD9F7F395F33D5FF40A
-:10616000BE5E0E7F0DFBD933BDE9B94EF4B7817D1C
-:1061700069F6B399F5B0B267FF674A3AF9B53B1CC7
-:10618000C877419F93E7C198F46469A9414F76EFBE
-:106190007BDF5168DFBB2BC36FF5C2FA0E65F86D6C
-:1061A0005EB48732FC76AFCE0E6D01B8D0B91FD089
-:1061B000534F26B013C77BA57D1420BFC9C66ADE26
-:1061C000DEDCEE222F3F27B42FB7D24BF6E7DB659C
-:1061D0005EB23FDD95BDDA9F778838D16D18871C98
-:1061E00012CF0FBA5DC46B80EDFC88B78DB68057B7
-:1061F0009F3FECF666D2BCD2C73CD58E79D42D1E1B
-:106200008B47D1B0E4F9DC1B5CD69A9DE2BB1CC382
-:10621000777C9E2AC21BE06A75593FD7D3ED782F51
-:10622000A3F7C9D639DECBED5E1B0BDE8EF6908C64
-:106230000FDBDEA976A2BC6B617E0F97933E8F3E8B
-:10624000FFC3C6783C78BC880FCBE7AAE71FCBC357
-:106250003A9211AC463C9AF3B06ECCF08FC7E7216E
-:106260006BD8817667C899785F5C23F0AA8AF5823B
-:10627000014A7445F350CF3FFE03F6E61538EE8D24
-:106280006A98F2245BDC95A54157DFFD5C73BD9CE9
-:106290006F75F6D15C3D9D9AF913ECD3CBF11C9947
-:1062A0003FA3D04ADB0EABAF14E1BD19FF3D86FC26
-:1062B000B40BF0FB1E79AFE21C2EECE37ACDE39534
-:1062C000FDECCBF22FF3F27CC3155E9E6FB841D587
-:1062D000F5937E8E7EA49FA30F7EAB35DEC4FED1E8
-:1062E00093A8DFFB0AC75BBC3DECCC5BBCBDD89977
-:1062F0009F1E1B9A81F16CE9EF32B793E722657D0F
-:1063000073A671FC4DE5BCFE4381BF3F8A7B3A1EFC
-:1063100015F3709ACE8B3AA732BAA7439E3395FDF8
-:106320003CEA7553FBB5D9E31FC5F96E2A51681FC6
-:10633000BA295331EC47EBBDD58F225E23A2FF472C
-:1063400005FDEE18C8FD39E63CCC25D8BE024BDE73
-:106350002F9E6B45396657D58470FC9997FB8B2E21
-:10636000878EB07FE9776BBC5B11FB27E3BD08C06C
-:10637000E7AFA481FC39BED546E75E17A8AE4D480D
-:106380008FC9EE39A81F16A0FCA7AF7A7E0CE19941
-:1063900096D553AFEEF776EB55DF799E23FBADF73D
-:1063A0003CE2FD1DA99C4EBBDC2EF29B9BDB9D10AD
-:1063B000F8D92AFC1A28D751BF64A96C65223D730D
-:1063C00042C8D57FFC5C33BFCF23DBE5A2EFCCE72F
-:1063D0009A3BEC1D1BF371BEDF507C787E21BFCE53
-:1063E000B32F3F07CF316AE4E3DB54C2D2ABF07D79
-:1063F0009985DE675EE9D964C3BC6F8D61E63EB303
-:10640000C1386E18C755C0E3385BC357ECCB8776ED
-:10641000195A171B388CCE7B4FF622DFD6F2FC7947
-:10642000F3FABE14FCE1DA08FB0B848796380FFD03
-:106430004B417F206FBE403AAFD6D82E7E2E8BE7E1
-:10644000C1225952BEA28FE76BA761BED3202E6F27
-:1064500048DF644DB014E4C6F94B15F0369FE7767B
-:10646000159CDF79EE197589E73BB480AFEB4F19C6
-:10647000812C1C77C6B875DC1FF6C5D9B36A251AFE
-:10648000C79C4FE07B86FE8A941C2E8753348DE494
-:1064900032F32894E7EAD47C4D584F718DF5A86803
-:1064A000273B785C92CDB730BC5F6582E8C75FCB95
-:1064B00094774BB95F96CB592B7B57D2BF2A805329
-:1064C000897A96FF01FB696B1AAC6782EB30C527AE
-:1064D0005306AFACC6730DCFCEE37DFC30C9B90116
-:1064E00079DEBDFB5C3F7BF8B0E15CFFC6070E1BAD
-:1064F000CEF5871F38FC55CEF54FBCEF81C3FFCCDE
-:1065000073FD529E1D5583476F06F85F0544152A9B
-:10651000C7D2CAEA08DF5E82DB9502CEE1CF01CEA8
-:10652000CE389CAFDA7388E077D406F386F16DE35A
-:1065300039A86D3765445A482E4668DC59CED6498D
-:10654000B8EFECB4778DC0713B9F7EB5280CF2E4B8
-:10655000D8F74EBB19D0DF5BD62E373E3FB9E625C4
-:1065600037C2EBD81A95EC353A17ADCB475A28E825
-:10657000EAD982C01CA4AB796BBFACD4DBE32C940A
-:106580004BFA777144A5D42B29FF963E9626888E28
-:10659000D797B7651BEA522F2F77243EA7FE6001DD
-:1065A00097438B1FDF61EFA7E1F8C1E60298C74967
-:1065B00091DF7072979BF661723E0D8F97D971DFF4
-:1065C000F9D61E078B921FB8DDC6C89FE59FAAE4C7
-:1065D000E13D46FC8F799ECFED4DA3FE16DCAD92DA
-:1065E000DFA91EC60A015C837B16F37DB0691D0B13
-:1065F0008E6993515E2DD8A2B0B0C6DBAFC1FB331C
-:1066000042B7501CC6BC4EB37E5994E4FE9C457BF9
-:106610006EA3EFE733FF6D68CF2E6835BF9FF21E84
-:1066200012F9A273C4737E5820F44E251B7D761098
-:10663000C58F32866BE7D63B27D772267D7FAD9319
-:10664000CA0FD77AA89C53A0111E96EEDEF75C3FC6
-:1066500062F3F64AD44BAF1C6C4CBB568BDBDD951A
-:106660003BAEDB7F3F91BC313FB34EC07DB4C8CB66
-:106670005C24CE3D541CED3D2FB30EE131A2E77CEE
-:10668000A59D5D67F2FB4ABBDB0C8F530727A42156
-:106690007DFC52C26534C045FDEA7049F6DD729555
-:1066A000DF9B667E2EF9688EA0EBF93B676E2A842D
-:1066B000F15B9E7E6F4007D129F75F54087855B88B
-:1066C00036B5E3FA2B98C96F18662F331D3D033D8D
-:1066D000A9A877CC742BE989BDCCBF770ABF463710
-:1066E000BDEEB99DE02BE90A4F3A58D0866351AF11
-:1066F000A5EADCF75C2D6835D63FB2750C4079B25F
-:10670000C8E46FF84849BC7F7BBE60202D76BEE6AA
-:106710009F8CF9170B586013F7CFF3FB714E5A5B40
-:106720009FBB19F97C27E7B3E5BF7AE2BF507E2D06
-:10673000F9CFBBD3517EFDC5DA9A87E32D7B646325
-:10674000BA1FE598359C8EDFFF25A2263C473CB852
-:106750005091F9FA2ECC535B41A406FFCD0F4F4761
-:10676000F9F9DF8FD83CE8876D7ECC1175003C5677
-:10677000ECE27084FADBBC7E0BC1AB79B7912F974A
-:10678000FCC7DD791AF903C2FD04FCFAA1085FB168
-:10679000D34679AD2B5E567D384C33EBA2F599BFCD
-:1067A000C779C4006FCD6D6ABD3DA3E77BB084ECB3
-:1067B000C86FCDBB383E9B77717C359BECD02621D2
-:1067C000B7CDF49F5328E2BA82EE013EE45793F925
-:1067D000B62CC2E577CB4FEE1DF136CCEFC39DBF93
-:1067E0004B5786C5E99F615628C0ED545BE33C7B5F
-:1067F0002FF7F57C24F8A45B2F083DA4ED8689E5EE
-:1068000043750F2F97D9A2E997025C96EDB0F9C2B4
-:10681000F078D913AADF8576D46B0EBA7F62E913BC
-:10682000CFBE3216E6B7F4495BCE54BE0C17CA6F22
-:1068300089AF66A4F3F2387E96FCE2593BE669E242
-:10684000F33559713C2D7D729F1DF33ECDF09CD0E8
-:10685000B6CFCEF9CD84AFB6B727A3DE6EF9C9A700
-:1068600076A487BFEC55587E49CFEF9B763C9B8E34
-:106870007206E184FA45E2AD1B8F3DF0179DFEEBF9
-:1068800051D4CE83719E73E1F1133C835041F4FEE9
-:10689000F35FC33C9A5E77F8100E4D3FBF2E1DD7B5
-:1068A000F39E7525A7FB0737E6A1DE6EB285F33CA4
-:1068B00054F2E74DDBBF43F4B8E8C5EFF0FB9C981A
-:1068C000BF00F919D65B80EB5CF0C055B4CE852CC7
-:1068D00048F4D8F420BFDFF08C95D524DA0F3C249F
-:1068E000F8E6BD871DB47978CFCEF87D217F50C5FD
-:1068F0007D58ABC85EF98E58334868AA9F71727C88
-:10690000AD2E94717F2EDF9A45ABE69DB7907C7BD0
-:10691000BFC89F8FFC0F7030FA675F9C942FE422F2
-:10692000DDEB42DF01FD4DC0E7D8BEDDE64F19616A
-:10693000F84EE4DFF2F1AF17E3C3BC53D1CFF75EFB
-:106940009E719F2BCB2385D2AFC6DA999ECE92C97A
-:10695000819D5B88BE3E7999CB9915919935F4BE9E
-:10696000DD16CDC7F7917D572A2427C00E49C4E70D
-:106970003B6D82CF8DEF619E56450FDFBDFCFC9EC7
-:10698000A4978577417B1D5FC7E9C71E7F5E12E72D
-:106990005799BFB1C864CFC9D22C27EE33C909F9C2
-:1069A0003D7B2037E1F988B87C0813FC96D9228F0B
-:1069B000FE3BF2F56B0E3A17B9EC091BDDEFF3C1A4
-:1069C000E3FB5FB916E8FF8336C9CF46F96BE6E70C
-:1069D000A6A7AE6289F8F9839C004BC8CFF03C2192
-:1069E0003FE7F0F306FFB7E4EFA224F2F740614F70
-:1069F000BBE352A8BEFFD3A5C5B43F33C157C2D530
-:106A00002C4F67A3B190DB539EC29F97990E9E12A5
-:106A10008E924E97FC6C398DD34DCF925E253D778B
-:106A2000D3AB79DD46789ADFDF827BA7DC38FE6D59
-:106A3000EB615F8EF1DAA755CACFEBD4BAD2B3605F
-:106A4000DC8D22BFA7D323EA99BCDE956BDF84F2ED
-:106A5000443EEF4AE1F90E9D81AEF44CDD7EE0ED5F
-:106A60003D6A3A9E07E88824CECBA08C0DF483249F
-:106A7000C9DB90E77E3B53B9BFAF3395FBF926A93D
-:106A8000AE0121DCDFB5F2F8D2FC7557A7E3FEBEFC
-:106A900073CFA019B5B81F38A4F29CA3B0DF5A0079
-:106AA000F06DE44B672759F89E7168BFEF593A15AE
-:106AB000FB99BFD5089785AE9D76ECE70C5B43E567
-:106AC000C2BB6C713A81FF9660BE16D2F903A6E78D
-:106AD0007B2E23BA5A62A2AB20D25582F32419FD31
-:106AE000045D95B132BEDF16F13121F726A9C366E8
-:106AF000D4623EE5417EDEE3D41E956DC2F53E2EA6
-:106B0000E265E15CA2D71540DF7ABFE987487743A9
-:106B100093EBF90F7F79ACF26668B2ECBFFE34E21A
-:106B20007E283FFCAFD72EF80DD67FF5EA803FB127
-:106B30009EED27ECFD6C2EE575EE75D0BDA69D7B18
-:106B40009F1F7033D67FEDA0FB453BD7F37D767852
-:106B5000AF9BF47F6711B7175B9EFE744407E92F64
-:106B60007E6FF0D87EFCBCEDA93D7F7B53C17CBE1F
-:106B70003DB02A948F62FFD6FCEB14DAA7773EFD76
-:106B8000A9617FFA55D7B3429CBBEA74B35A3C273C
-:106B9000DD99C9CFA936FF66CC8FF1DCE5F25DFB4C
-:106BA000EC8DF07EC2FFFE7204CAA1CEA7B8DD0153
-:106BB000F6F076E6033CF46BBDDD06F8FB086D44A9
-:106BC000E09937FBB54FC3F3243DE1C2E1D0097032
-:106BD000C075015C9A507E268347DDBF2C3C3E9EEB
-:106BE0008BE32FDB339AEE198EC345F1F3E76ECAC0
-:106BF000F780F5F3E77B3F1D8176D4B9D67B533F11
-:106C00007EEEE77FCA7AB7FDCBAE97D3BB864E99AF
-:106C10008A9E74DF93AE7F7503D57FEEF6D17CFB41
-:106C2000C8EFBBFF87D1F72BFFDFE2FB90C0B7DBDC
-:106C3000837199CEA7BF1CC0CE63DD67FE65F1DC12
-:106C4000FBBABBED1E8BCF390AE6F73A8B5C55AD2C
-:106C500024CF1F1DD85FFA1FF83E43DEC33D3D67BA
-:106C600021D911D3FDDC1FD3C2CA0FE239BBB05FFB
-:106C7000A5F80525EF001CDAAF2C8B509E98353C0B
-:106C8000E41ECC1B9BB5DCC7EF2B33EEBFA6E7D5CC
-:106C9000D4A03D77641DCC0BDA1D715B3C2DB08414
-:106CA000197E95EC3F28C9EEFBE3F8CB280F65462B
-:106CB00095711F72AD693F7175ADF1FD2CF6702EA7
-:106CC000E6FBCD6AB2517ED255E6FD477F0FADF3AC
-:106CD0006AB67223F7E79C1F9C2EEFCFF7633DE166
-:106CE000D03BDC7AC049EC37297748EB093747902D
-:106CF000EF3F1DF042D85B222F6F759FE0C9C4BEE5
-:106D0000D4218696F075F8F9BDA3BA7E092E12EE4D
-:106D1000E70B6F892733DC257C25DCCC781882E7EC
-:106D20003D2BE2F08F97C67BB599B01BA777DB8D23
-:106D30002E82E30B3BF9798917AA1AB79661FD7188
-:106D40007E1FFC9971239913D67BC4C676535CC809
-:106D5000EFD73C95F1FC19A5EA798A4F60FEA27E37
-:106D6000BF8AF98BFA7561FEA2BE8EF98BFAF6988E
-:106D7000BFA87F8FF98BFAF798BFA8AF63FEA2BEBA
-:106D80003DE62FEAEB98BFA86F8FF98BFA3AE62F12
-:106D9000EADB63FEA2FE3DE62FEADF63FEA2BE8EC3
-:106DA000F98BFAF698BFA87F8FF98BFAF798BFA8EE
-:106DB000AF63FEA2BE3DE62DEADF63DEA2FE3DE646
-:106DC00029EAEB989FA86FFFADD833867A35FB9DF3
-:106DD000A1FD04E74B86FA24CF9F0CEDBFED3D6E7D
-:106DE000783F45FBC0F05EE2FFB2D2D386E718FBE6
-:106DF0000857E23E86FF99E6FB9BA11F2B0B509C98
-:106E0000D4CE5652E9447F2F94A9AC8D4A17B0399D
-:106E100096EF0D0D3EDE1FE9757B781312D7913189
-:106E20009F0E40F9FFC2B82BB85F42C41766E03F1F
-:106E30003520E2B42FFAE33E57C64FD3632A8B8E38
-:106E4000043A8C29547A62692C9A0D74184BA13239
-:106E50002B964DCFB3639954E6C4FAD1F3DC5801B5
-:106E60009579B14154E6C74AA8F4C62EA6B2207659
-:106E7000219585B191F45DBF581995FD6397D2F3C3
-:106E8000A2D8182A07C426D0F3E25835955AEC3216
-:106E90002A4B6253A81C18BB82DA0D8ACDA47270EB
-:106EA0006C363D1F12BB86CA0B628D540E8DD553B6
-:106EB000591A5B4AE585B1C5545E14BB8EBEBB381A
-:106EC000B68ACA61B19BE9F9F0D877A91C116BA108
-:106ED000F292D83A2A7DB1DBA85D596C0B95E5B1E9
-:106EE0001FD1F391B13BA91C15BB9F9E57C4EEA3C4
-:106EF000B232F6632A47C776505915FB199563627B
-:106F00003FA1726CEC17F4DDA5B127A91C17FB0D8E
-:106F10003DFF46EC7F51F9CDD87E7AFEADD83E2AB2
-:106F2000FDB1DFD1F3EAD8212AC7C75EA2E7136219
-:106F30002F523931F6277A3E29F61A959363C7A95D
-:106F4000FC76EC6D2A6B621F503925F6172AFF2D4F
-:106F5000769ABEBB2CF6319553637FA3E7D3629F2D
-:106F600051D9BDFF1F97F477052C6771FFECCAEA72
-:106F7000D37D6577A6A5935C9CBE86CBC57BD33EAF
-:106F80003A4072728C437390F0DB668877D18F48F9
-:106F9000C0BE6FDF98F7FAA3BDB3A9FAF81BD7A15B
-:106FA0003E5BE560429F99E4EE172EE1EF64988F17
-:106FB0003847D0F50B55FB73D18EDA54DEB10CFD9A
-:106FC00026B79774D4615950C4ED098F28F38B7894
-:106FD0005CE9EF43B9FEAD5B3584FFBE404EDFD6C2
-:106FE000374BE8EDEEF6033C5C5FB8BA06D079BDEE
-:106FF0003EF6D3D776E7CAC3FA5BFFE0F0A2047986
-:1070000058F1F3837DEEA7F26BEAE75B7DE9E72DAC
-:1070100081F7878A02138A101E56FF087C3F7E7D07
-:10702000818ABFAB52BF55F120BD346E289B8C784E
-:107030002D677EF24BCE49924FB658E0B561A58DD3
-:10704000A17FB24163E41F6ED8C5F390D19F3A0D82
-:10705000E8A549D0CBF22D1F93DFA969E5229EF761
-:1070600014E1FE29F93B364B5B773C876EBD33EC70
-:1070700030E5C72F7DCCE8BF6A16FEA9E56DA6E70F
-:107080002BBF9DD0EF69F64B3514093FB28FE73D1A
-:1070900031B53FADFB0CAC1BF3498237B89DA83727
-:1070A000001E14879170907E4F090FD6F3DC05E522
-:1070B000AF9E3A3884F2E44E695A3EB60BA6F3DF2F
-:1070C000B352ACC1D1F81CE048F92C5DEBD2281FBB
-:1070D000EA6DD0031A265E7982A3F1FEB88ED78BB3
-:1070E00098B8BFD2188F706EA53CF17A9803E6A5C8
-:1070F000D43F924DE736A1BF11BBD1AFF9888DF2D5
-:1071000091C26CB59755F58C570436DA882E1A76ED
-:1071100067F2FCB4B0FF653C5720F1F2F68641936C
-:1071200031AFA961734919B9EB76DBC83E94715947
-:1071300089AF9EF9DB3C5FA099453661EA12E0EB2E
-:1071400044427CB5EE23BC02DE4E24C1DB89DEF076
-:10715000765F91F027FA64BEDAB08CABF1E59A6CF9
-:10716000E2E7BAF5D1212B75F469F6FFB3F963E9CB
-:10717000DE1399FF5C53287F67CC9787F83DBDB538
-:1071800082F066C657CDDF1B092FEC7537DD3B3C1F
-:1071900067109B77393C9F27FC9E735AA690FDFD94
-:1071A0005411DF17BCB016733F197B71AD93F9C151
-:1071B000F87E69AD87EA7F5CEBA5FAAB6B352A5F99
-:1071C0005B5B4AE5093BCF2B92FC058440F97DBB14
-:1071D000055FED2E92F19FEBBDE8E7AEF9FB4B1595
-:1071E00016127DC7A64F2A22BBDD902F527BA531F8
-:1071F0001FA4C326F2CDB6283EBC4FA62170A9A17C
-:107200003D2B1D19AFA3FE11F92B0D9B33E91EBBBE
-:107210006BA6661BDACFDADCCF506F2FD2F87D6A0F
-:1072200035830CCFAFADBBD850AF17BF1FC1B42A49
-:10723000E21B19FF02CDCDF1E2E16D3F59393AFF72
-:107240004618FF93C3367A6FC6C7097B98F6F3E1F9
-:10725000871D3E8CEF9DC4F36F503FF94795F28B2D
-:107260004EDA58D80322FEA4C23660C9AC9CAFCE19
-:107270001CE57C55F37795E13E9EFDD441F1C1C6F6
-:107280006D0A0BE3DD0C5D007918F7FA9F3868DDB5
-:10729000F3B7A92C48E7ABB4368C935FFFC8501FF7
-:1072A000C647E70C8A16E179C3AE5FA6F8F0DC5753
-:1072B0006307FFFE24ECCF33313F4A29A778C45F30
-:1072C000A7B52EB460BE9D7A3817F9F5AF4FF1DF40
-:1072D000355BBCEA8F951E80F392E7DA5EA9827176
-:1072E0004EB4AA34EE078F3976A8C4F7FE7CBCDF13
-:1072F00036BEEE08F929A614063E43F9FEFEC2C8C2
-:1073000008923F6BB87FBC277C60BD886FA4579DF7
-:107310003C8BEB371E7F0321548072A2D1E6A3B8C9
-:10732000EC89AD368A17823EA07C8313ADD9162E28
-:10733000879E22BA6BB06A76FDB80D5B553FFF7D24
-:107340000CCD8EF36577AA41361AEB3C3F22BC592F
-:1073500009F2F88F11BFD7AD1A4DE7A2CD795CB213
-:10736000FC08782AA88B2B2D799AC77FD9A80EAB59
-:107370003ECF5DFA6758B0CA709FD1B281F7FE6008
-:107380001C94A7FCFCEAC5333BDD24273FB43C53E7
-:107390007923941F4C0BBF6B05BCBCA806870CC09F
-:1073A000BC21CBD6ED0AC5558EFF00E3FEEF3F6151
-:1073B000F3111B8ABCB1253F5D4CF1A9E4F602F341
-:1073C000F2F875344FF1E2EDC48CF24566B336E164
-:1073D0005F88F03C039C04C0C7B38CC7C58E57B808
-:1073E0006FC5F3C38DA6F3C6C7C5398BAA01DC6E82
-:1073F00092FAFAC6015C0E345A387FB2BDFC1E4ABE
-:10740000F97B71528E4B792BE575CD009EC722E535
-:107410002C636D245F168AFB92973DE6E0E78B3480
-:10742000E641382EE668621B0770BE5E627FE21E90
-:1074300024EB45AC9DF4DEFBB6C8C2F612FC7EC759
-:10744000862CFADEE68B201F47E4EFD159498E2CBB
-:10745000627C9ECB5B954854E7EF90BF4FC2504F84
-:10746000E8E44E0FBD60D2070B84FE5BC04CF946CA
-:10747000AD463D154873D3BA96B48A3CECEE79A973
-:10748000EC2CC6BB8291E7A6D3BC155F24C13C1689
-:10749000B1AE28DE8BBCFC717E8EC93C2FF33AFA6C
-:1074A0003ACF85BE9913F17EE5EE714DF396F06605
-:1074B00078B04A870709F785610ECF857B14C2D75C
-:1074C0009F85BD25CF079AF1BF8805A6A39C5B7455
-:1074D00017EC334BE2F420E960F193113A0FF80115
-:1074E0006B4D77013F2CDBF6E4AC31F0FDA2075E7B
-:1074F000B423BDD7654587583261FF199E70474D4B
-:107500005102BD6FD2F35F179C98F05BD177009763
-:10751000053B55CAA3D0B513790461E287A630FFB5
-:107520003DC1A697555F0B3C6DC29F392A3FFFF9BD
-:107530004AB8FDB3E76DB66B760DE8DDAE31CB9B97
-:107540001E768D499FE2790ED49F5DB93C3FFD13B5
-:10755000AB3F238BE4B4490EE796D37DAC520E2F9C
-:10756000147A508EB300F51FD4DFDDF68B74F46708
-:10757000FCF9AE5FE451BE06EA9B61717D73432363
-:107580001FEF865FA550BED45FA7B58F407BB0EEDE
-:10759000C1E7D3F5F7BD7E5010FC03CA5BA91F9766
-:1075A000AB3B06E0EF1A4A397BCE7D5BB275BACFB2
-:1075B000B14EB7719D0DB84EDD399546B1CE7736D7
-:1075C000F3F51DDFCAD73BBFC73AC31457B9E1C7AC
-:1075D0000E5F98EC8E28E9F5934FAA0CF759DD76EB
-:1075E00087C90E38C35AB7233C96AF7EF54D2BD0D2
-:1075F000C5E20B003E400775773A48EF2FFE258F16
-:10760000A7BEAF54E75340FF4034FDBBF07C09D820
-:107610000B686FC4E7D16D077C3E406F07F4117EA5
-:107620002B845F6BC59EE7E977B4143FCFC75C211D
-:10763000EFB5D96DBAD7464319C0CFF93B114FFD0D
-:10764000CDF77171FFEC7F0FF978EE6AA2FFAE0BF8
-:10765000F4E7D89A53A336CC43EE7A52213B69F92A
-:10766000F5D5E9D50CCFB771BF5A7E31D76F8ADF18
-:107670004FF9350EC06B2A8C5758ACF1FBAF340F65
-:10768000CF377F80D13D3A72BEE6E7E86F77A23E02
-:107690007459481F9AD73FA598EBCDE5AA85ECEB26
-:1076A00065766E67778AFB2B868A790C2DE6796082
-:1076B000C38BB99FA113ED4A8C777FC341BF63C4CD
-:1076C000D844F2BB5B19A73FAB849BC7FA51377F05
-:1076D00093FDDCD51FE13497B5D3EF224EAF9AA9C5
-:1076E000E1798637F39C744F14FC09603FB3453F42
-:1076F000476CFCFCC29B3806AC6BB6F04FBF89D719
-:10770000A3C2F86F16D8C9AE0D3FED20BBE1965469
-:10771000EE3F64391956E4876B859C9A33CEE14776
-:10772000B93E7BDC2D012CA1BF300378D539BB36A7
-:1077300096C138EB2C5CDFAFCB62DC2FB0A1A3028B
-:10774000E1770998C998BF0FABDF7536BB373A327E
-:107750009E9F58867E86B18C135815C1D7505F66A0
-:10776000E7EFE73DF41F33EEEACFD81F306B0AF5A1
-:107770000CC208E9A23E83F6BF33F07C4116965650
-:10778000A2B7CBAD2C6CE1E56617DDABE435FC2E82
-:10779000EC55552C9A01EB8B1E329EEFB83A6A8954
-:1077A0000EC5789135BA0FE167716A360F8C13A850
-:1077B00051CA11EECBD6F76DBEAB1F7A6AC65DE338
-:1077C000A08EF779E13CBFAB50BED06C607AA4D3F9
-:1077D000B95676402DE7F8433A6CCED2C2D46E1536
-:1077E000A77379AE44E2A50CBAD7C377B6981FF455
-:1077F000B3391DBFB727F6AB7CBF58C6E3B8BDB6DB
-:1078000054F0ED5249778F1BF935827C83FC84F666
-:1078100021C06DB62893D1FD83822F1E2CE6FBCCB0
-:107820002DC5729FD9B7F1963B5894D6FDB483F01D
-:1078300028C79D21CAFB8BB9DD29E721E977215BA8
-:1078400049F93C0B859FC6029284F2835B7FCCFD95
-:1078500042A6BC23309428BF6DC94EF3739D9F4749
-:1078600035C825F29B2AF6AEF9383FE59B293EA4A0
-:10787000F7D9F636F20F98DBD9F0F75331EEB61997
-:10788000EC2A45C4CBA0EED8AAD0EF5ECCEEDF3513
-:107890001CF53948EBC9742E54D8DB0B057E1DE26C
-:1078A0007EAB85685F615C0DED2B84D7366E575AD1
-:1078B000853DDCB0D5686FCCDEA0B33B7961B81FE5
-:1078C000C061CA53B709BBE32D7BD77094FBE6FBBD
-:1078D00002DEB2F07584F318BF573387BFB70AFBD7
-:1078E00052D2D513C53643DC4D9E3BAD4379C5EF2F
-:1078F0006D30E569B9E8FE983A85DFDF29FD906FC4
-:1079000088F214D8A1745FCEB1348A839BFD939D15
-:10791000D5EEB045E7A79C9371C374844F5DBADD83
-:107920008AE51BDDF78A75D0F8C73C03C9FED95438
-:107930003D721BE627FDF9A153339C45144D11E719
-:10794000A73E7D01F3E9AFFC02D643F5D80C3F8E8C
-:10795000F36CD75C2788EEBF157F36C30A7ABEF377
-:10796000EEAEED58776B9600D56FEF1A80772EBB91
-:1079700023765E5F27FBB307304FB9F33E5E7FFF90
-:10798000217B00F39FEAC4B9A5BAB10AC9DF54C18B
-:107990005FD2CF5467798697E3F9EFA29CAB5D9EE7
-:1079A00016482DCEC5FB504FD0EF2F940CF4A716E0
-:1079B00043BBF401C133582E99A984ED78DEFFE56D
-:1079C000C80542AF25FC9D9054A1A70A4A02F4BD08
-:1079D000F4A3433F7FC7FECFD5CFFF016BCEE90AAB
-:1079E00000800000000000001F8B08000000000065
-:1079F000000BD57D0D5C5455DAF8B973E70B6606BC
-:107A0000464003F9700604B140470545A51A011127
-:107A10003FD041CD2CAD4634454341ABCDDDDC7785
-:107A20000651336B0BABB7DCB2763273ADD75A323B
-:107A3000412C3F06B5D26C6B4C6AA9D4C532BFB29B
-:107A400022D35DFAAFBBFECFF39C739939D7416D5A
-:107A500077DFFDFD5EFCF93B3CF79C7BEE739EEF10
-:107A6000E739E75E2E5DA23F371312D94B43482E0C
-:107A700021BFB7B9227B752764FAC2F46877162153
-:107A800051296E838DC2F3CA24AFBE3F21A4C5978E
-:107A9000E1B210329E1067BD99904BFCFE4BAA7963
-:107AA000EEB35F368FF59F99E74FAA79EE94E8BD64
-:107AB00043E97FE2B0C1FD77A439B360DE7BFE8B82
-:107AC000B8611E52345C43061372AF91E0CF8FD57C
-:107AD0005B338C39B4DD648825763AEEF56D29B3D5
-:107AE000E93C6431BD2981906F9A3FD3DBE83C0BC0
-:107AF0003A64E28C25A4AA43C276C196667D311D04
-:107B00005745DBC210FC2A39BE84B469275A82D794
-:107B100007D828BEDDE1FA6A6CEF79FDB4D64DC70F
-:107B2000DDA3A93FF16C1CBD3C4C72BC6CBB7C9DC1
-:107B300009FCBEA38494D4675DDE3FC426617F5DEB
-:107B4000BA7330AC339ECE01B0AC61EB558FF7F217
-:107B5000F9A64792BB5CB47FE6608BD146E99DDB1A
-:107B6000E2AEB5503C66AFB50F94E91C03520A9CD7
-:107B7000301F99354CA057494F4202B03E6D7B0FE4
-:107B800042DB1FB7E746138AD7F498C07D64002113
-:107B90000FFA32EA8CC9848C7D868EE989B7380960
-:107BA000BDB7C4C061EF8DAEA27C0AFF4346F84E5C
-:107BB000DB903A2F9D671FE043E7B963487624E9DD
-:107BC00047A9673769ACD1F4E6E4190F021E770CB8
-:107BD000B9B118AE8F30583266207D09CA8733D9C3
-:107BE00035C596CBC613BA0EB7DEDFFD56BA0EF713
-:107BF000FBB2C34BD7E1EE6772FBC2D06D32A7C3B5
-:107C000083362BCAD13E0DC57360100FE5F9845839
-:107C1000EF0BD0F98E2F4D18B08ACEF7BBE411BF11
-:107C200082E729CFFF5DB27B4EE8F32946FDE0FAFB
-:107C3000B5E2318BE3F12BE01B9DC7954FE58CD36B
-:107C4000FA12FD3FB1C824C093C7C5126766109EE3
-:107C500032395180A74E4F13C6DF3EEB06A1BFD489
-:107C600010C8A93607E55B8D8FD25246215E559626
-:107C70008D5184A27864FB854FA7513DF97EBDEC00
-:107C80009028AE7377BCFCE9703AEA1C5D702CA5B5
-:107C9000DB392705E87ACF6D917D5E3BC887535B62
-:107CA000DA83900A988A8E9FBFFF4DFD08FA6B45D4
-:107CB000F59C71C0C7B93EDD976D21785E2017F540
-:107CC0002495EAC346F17A1579F407B91F407EBDC1
-:107CD0002B9BCE53AFEAAF1E759244C138ED976D22
-:107CE000CA3AE9F3171FB63FB63764DDCFD92C7116
-:107CF000276EA0BF0C24032FC9F0BCB3EFD215929E
-:107D0000C2A666E453ED7ED901225A9B2C1189AE9E
-:107D100073D416832F82AAD6B7DB8EE96D945E7F6B
-:107D2000F5D81EDBAB03FDAF212416EE3BA66FA3F7
-:107D3000D787DB6C48A705DB7FD013CAF751DB1769
-:107D4000A25E17533B164DE527D04CB2B7D0F9BD14
-:107D5000768BE3653AFF3D2B4713328890E88E69B6
-:107D6000D856D68DC6F9E6774C4278418709E17D31
-:107D700091816242F1D8D7D88DD4523C3E92FD1900
-:107D8000CFC13C060BDA89D2C43B96C2BAF7457A1A
-:107D9000B3EEA5CF2BFDC3A812A0EB822D9213E466
-:107DA000AC5426FBA418C03702E72B953FCE5948A8
-:107DB000AF8F2DB47835D1D84F08ED97075B5611AA
-:107DC0000ACB7A6A2FC2C8E77BDCBEE8DA18DE236A
-:107DD0003BCA703EA5FF8FB654945B05D6755FAF66
-:107DE0002D3707D7A36B93B01DD37103B6555BCA6C
-:107DF000B436FA9CF7335F8A033AD1F1667758BB01
-:107E00003C249A84B15F4A6BE0F6781AD8633AEF63
-:107E1000DE54E757A087E397B4698D604FCD46EBFA
-:107E2000CB540EC6E70DB0CD0E5997BCFB3662A3FE
-:107E30007264886BD739E9FCD3681B6ABFEFEAC26A
-:107E4000DF9CEEB4DF35B85EC52F91CC2584503968
-:107E5000BFD3CAF056F4EA533E5EB93F2031FDF07D
-:107E600036187C2FD3DF8FA4BAFF06F8064690A9F8
-:107E70009BD19E0652CA2CFF3EFC297F8DC0FF2855
-:107E80006D1B89017F6657F0677A7D35FCBFB33182
-:107E9000FFFA914C16835C7C74F3CD0127C5ABF9D6
-:107EA000C14183C03F28CFEB66D7E338626DBF087E
-:107EB000F25AB5D3645B45D7574A790370FB0E83FA
-:107EC0006F9D1DAF13290E5AC33A89F65745B56702
-:107ED00080FF29DC15E107B96DDE15A1053FF24EE3
-:107EE000BABB9BBD3B5CEF532451F9766E376841BA
-:107EF0000E7AD89C3170BD2B7CAF66C7147D54CBF5
-:107F0000997B25D33F37D7C3195C6ECBB91ECED032
-:107F10003AA21FA078DFF5814CC08E972F91B2B79F
-:107F2000E4804DB338D243F450D1371DC8E52090DA
-:107F30004F2697951DDDB87EDBF9BC4C0F4AA9830F
-:107F400006FA94DED0CD07FABDA02316C729FAAAF7
-:107F5000E869629A7B04ACBBB496EA377D8E7B6994
-:107F6000420EE84B504EF45690272A27F1B343E4D3
-:107F7000A0B6F9272DC8892E5F423931D0B63044DA
-:107F80008E5C9D718AB5B807C563FC32BB66150966
-:107F9000F617DB19FFAF55DE0771F92A37FBD3352A
-:107FA000743E5D75846329C5EB5C9C0DEDD8A2879A
-:107FB000294049B048E72A843863D16F2507D85F44
-:107FC000883FC0FE0C6EADD6BB43F0BBADA31FB166
-:107FD000513A4DEAE88DED8014F7647B2EF0670A84
-:107FE000A7633F6C892D4F03F8DC67647EE67CF560
-:107FF0004377C2F3CEFB0C0E781E21798CDF1CDF99
-:108000005CA7E3BA0700BF0F74E4453AFE54845BF3
-:1080100006BD3C954CAC4F521467AEA17CA6F39EB6
-:10802000D211AF95F2731685DD007723CE6E034132
-:10803000EFE83A43FCCA056D5D0A49A3FC5DF4A76D
-:10804000A35A6A0AE76604FAF9E973A78F60FEFF8C
-:10805000EC7A1DFAFFCAE68F076B68FF19BBF33A8B
-:10806000426DEFE89EEE05C0D779137DAFEB287C1B
-:10807000CF6FDE8C1A6A0BD2B35EEB4FD7D2FBEB1D
-:10808000291DBD14AFFA47E5121F8B7B4C65D957EC
-:1080900097EB791D69481FC5DF28F67BAB279E2E1D
-:1080A0002268C7AFE68714F99ECFF5603EE8010964
-:1080B000F53765AE1120879992239D84FA1BA60F90
-:1080C0008A9DA6F28E7A539A96ECA82541BBADF60E
-:1080D000477BE4FA2787D1F52E4D75FB80DF05FF3E
-:1080E000F3B7373FA75D959B5F29023E8DB84122CC
-:1080F000B2742D76F2271DDAC9256504ED246D438F
-:10810000EDA4AE8B38FD65FBCFB3F34FF2F134BE77
-:10811000C5B811EC78E87C47520BB6C23AB6DB25FD
-:1081200036DFBF096FB57DDFDEA9AFD766DF5FE55C
-:10813000785FCDBE7FC4EDBBDA9E133A1FD8F3EF54
-:1081400077F4F581BD3F4AA8FD07FFB6DD647B9952
-:10815000DB7BF40791D1BE2BD9FBBAF4991F756173
-:10816000EF0340B77FD5DE2BF2A5D607B51EA8E5F5
-:108170007EEC2334FE023E6D9508D8D760BC455096
-:108180008EF7A5323956F42624FE423F4FF5C197AB
-:108190006EBF5C2F7FACFE538E0DF2CD1CCB002248
-:1081A00005E55DD11745DED57E644EAA5B4ACD0D4F
-:1081B000EA49E566B51FE84A9EB6E9207FD555FE37
-:1081C000C0FC006D43FD4057F18E3EF5E7E9C179F3
-:1081D000FBB5C50B09A97A9CF77F519E12804E61B1
-:1081E000E4A967EABF204F57E023FA1945CEC61E1F
-:1081F00060F241D258BC4FE505F1DEA74FF6D5DA63
-:10820000C1EE317B38F612A9067ADEC5EB098ABCCD
-:1082100016A5B96F0AE533C4F710B75F6B5C382D4C
-:10822000AE9A38E9F5BB681B6A370CC0BF30F17DE8
-:1082300061EACFF3F30352AF8DCF93399FFF8D7176
-:10824000E15DA961EC047132FF1FE48B6112C8CDBE
-:108250008F7E2D01FDEA8AAFBA358CEE0ABCDCAF09
-:1082600055FC6B2CF8572A2FEED47F21DE2C2DAC39
-:108270003F6FA4A1DF7FAD1B5EA61D4AF3F43CC295
-:10828000EB1FF9AB9D5AB02FF4F7613823D6473E68
-:108290009239ECBDF16011C563EC939DFD5EE81F62
-:1082A000991FDD594F81544219FFEB75C30E3E8A69
-:1082B00078D7313EBADBB4AEEC103887C2961038AE
-:1082C0004F05AF65E3C18F58711E1FB3F7747E6908
-:1082D00020C0CA7C5C0F487B71378817B74856A806
-:1082E00087DC9EFFBD1EF8535AD8F66E225DEFEA7A
-:1082F000754565E6BEF43AD8418AEF8BEBC6ADF61C
-:108300006AF9FD3DB03E863F867AC929533E55E65F
-:1083100049BE54FBE5747C3155F467F0A315EF2793
-:10832000FA9C9F773FE82FDE9F8AF7FB0D3FE3F92A
-:10833000B7E613A72F8C9DFC8362272F5258999F75
-:10834000D26E523DCBC3D5E3B7F2F1018D663EA1AB
-:10835000F4DAB5CEBD1AEA652309938FE6757795F1
-:1083600079991C12A76ABD57C2F7E55431BF831F24
-:108370009B78BFFF4AF4FA9FCBE8C5E5A3429497E8
-:1083800068AD6BEF8F148FE838C90A71ED0257C4DE
-:10839000A310BF97162AF23DAFCC9944D71741845A
-:1083A000FA5F50BEEF292BA274594094F1F3578322
-:1083B0005F72693AC73379DF2E75DE9F49E5074B57
-:1083C00071F4FE2FD655AEF666213FB01F61ED1554
-:1083D000E4BD5E05E7ABF483CB37EA27D86D4A9F4F
-:1083E000F43076A383D3E75B894C05BB172860F193
-:1083F0005E2095B5F1692CBE23696C9C318DF339F3
-:1084000032840E49413ED31F3FE41121EB463ADD51
-:1084100016A7ACFBD1B271745D8118922D513989C8
-:10842000495BB97A59889CC4A53D8A72129C6FD564
-:1084300041A0E36D9C4EF1698F1CE4722481DECD76
-:108440004781A072B045F2CA749DF3410EC2ACF3ED
-:10845000CBCBE5C8ABBADFA9BBC2FDA72EBFDFA956
-:10846000BA9FE8E27ECEFD9C4FE3547C2C51F1B1E3
-:1084700048054F57609F60CF143B57DEB47A798F21
-:1084800038A8374AE026C05EEBA5018464BFF4DF5C
-:1084900065E60490579B2E91DAFC012F3D73D0487E
-:1084A000ED5919D83394DF35AB9DBDA97E83BE232A
-:1084B000FCDB32677F909FEAE5F174FC90979E5D4C
-:1084C0006DA4436F5FB65A0731CDF097D6AED6D2C2
-:1084D000796FCBF9C3BB309FB6E68583E3A42BC885
-:1084E0006B9D6A1D6B55B05735FEA9ABD8F765AAD1
-:1084F000FB97A8FA1F55C16B54F04AF1FE19B3243B
-:10850000D49319947F40B8ABE94D595A679ED1E98D
-:10851000CF2433C64982DC8FAD65F0B4973695AD74
-:108520003487C069AF9781BE2B72AC23EC675A1CAD
-:10853000F182FFD07561CF46A7752147996A7FC741
-:10854000FAFF0CBF26E03E8BE097F7C822DC2C2B0D
-:10855000786F3F785F165C54E0B7CBA07ED1E5BE64
-:1085600007D95606FB1E631FE7B0B7A90CE23465B6
-:108570009DCAF8E2BF5F92E1790BD39ACAD6C3BE17
-:108580004A813F1DEAF5D363584BFD8C0C7EAC8AC3
-:10859000D73B8A77C82EF033D323FDE98BB242D67E
-:1085A00049EA33609DCD0FCAC81F6F2DCB47CA89DA
-:1085B000430FF58AE6E8E8C51BE8F83D0FCA8BC112
-:1085C000AF1D5D1CDB03F289DD692CDFDB13DDAB46
-:1085D000C7DD146E36DDA5877A6DF34323B1DD2D3B
-:1085E0003B57B453397EFCA5F7D0CF379BA2913EC1
-:1085F0008FA4ED29ABA17AF1589A0DEF77C7587B7C
-:108600003441BCBA4A47A05E4D88E305949BDF180D
-:1086100006ACA278CCA8B901F78FCAFFBBAC3881F1
-:108620008E2B5FAEC37D05FAD30FF076AF1AA98704
-:10863000FE59CB78EB1D85EDAE7FBC79A01F1DDF09
-:10864000FEB0EC584707EFEC488D2AA7787D15C19E
-:10865000ECF097677B47019E7D7ABB9F4DA37C9D85
-:1086600011658994C079586D5113E9BCBDD39DCF74
-:10867000A5E506C7EFFA878CFB606F9F2DEF01FC25
-:108680007B99DBEF9D1DE53DCA43FCFDEC6FB548D2
-:10869000E75D7ADB7D105FEE8A4C96BCA8C7F5B12A
-:1086A00050B79DC5E36B2A2F8BDF0CE3F79F4893F0
-:1086B00071DEE386C5E42B2AC4CD8F74CF073C95C9
-:1086C000FB94FD375D926D60681CBDAE57C11BB059
-:1086D0008EA09C1D3D087283713485B7BFF4F96A82
-:1086E0002FF8C23D34FE073CE29CC5E007C8925813
-:1086F000B60F1A5F9F115A8F08C6A94BB93D60E3A8
-:108700008E782D98B71ED914E1837CE688F70B4B41
-:1087100068FD5DD1933951162F38E393168B16E817
-:108720007A54EB39F14BD8377C5E877674F6F3DDFB
-:1087300097B4833DA0FC847A90FAB93D7AEB709EA1
-:10874000AEF707BF11F5847C53E63477AD279FBEA3
-:1087500074A66CBDB96B3D99C3E3F6E2E7752E9044
-:10876000F339B9162DECD3153CFFCECB208F731601
-:10877000460C3450C4E73C6F40FEB6592C5E2BECDF
-:10878000234659B4DD68FB0D9787B69A08CC53E4AD
-:108790001E7AB47BF28A5C1BD0A750265A23F52B95
-:1087A0007294C3E662F032A81B2EB7E4D980BFB141
-:1087B000BD993E74F6474F1D23F50BEE9B9D5EFC65
-:1087C000E4D343287E67886FCA10FBBFBE8F56452F
-:1087D0005CD1507FFCDFDA47D3F6B6C49DA0A97800
-:1087E000701F2D2BFA5610BFC532E22D2F8DF001D0
-:1087F0003DE514E627461109F7D18895AE3F3BB811
-:108800008F26FF6A10D2E7B887CA551F4A972823D8
-:108810008E977F25FB0CF4B985B1ACDE2A3F5D460F
-:10882000605F8DD2D56BA5F0A8B86ADC5FF3829D3E
-:1088300001FD9688AB1EF5DF910279F2ECE72390FB
-:108840008F735E98FBE96F73806FA571A1FAD48B6B
-:10885000CB1F9D8F186382F39CACF9750AE053F827
-:108860003B9A5F42DE29BB9FBE0DEDA609F7DB8870
-:10887000B5ED3743405E6A4C03A04E3EE7F9849461
-:10888000D4ACE0FD73963E98C1EEA7796B14D8ADD9
-:10889000085C4FE51603CACB8C876527FAC9643D8F
-:1088A000FAC92F9745205C999487FA3643C3F6DFBF
-:1088B000684C188FF69D919C549A89F34D33D8FBE0
-:1088C000470332E38F97F34D0FFC19D63B169F7F7A
-:1088D00017D098FAAFDB7B73BA68981C919D12EEA3
-:1088E0003711526D033B305D23A1BD53EBE5D8DE5C
-:1088F0006C9F6F468AE34EB86FFE6306C7523BC358
-:108900004156F0A179D37C4D6036EC43924603D6B4
-:1089100037AAE83A22A2D8B987CD14FF2A2DD1EA86
-:10892000A13E6563764DC1A7CA56360AE495F6B7EF
-:108930006A69FF7C0BB3CBF3BBB1BA0FB1187D2FC3
-:10894000873E0F704E63F7D9A240DF86A2BC80FE3F
-:108950006B68FFF784F51746E5D9DAB270FF7E251C
-:10896000D44B009FBEFD429E4BE1847E208F0BB511
-:10897000A916E043EC94A9F0BCD764B44F54A91EE7
-:10898000CB8338F0357910E4B3331EDE53BC06E0F8
-:10899000370658018519AF1F423F750F97B33688C8
-:1089A000FFC16F51F80DDADEDB9BD907B7CCEA398E
-:1089B000F7F69684FD50A57FFEC33AE4C7FCE54C6C
-:1089C0001EE6D7FC09E79D6F09F4007ECC6FD00D41
-:1089D00006B95EC2ED45794D727E2B958F725DB4FE
-:1089E00055A2972ABDA57A802BEB248495E7CD7FED
-:1089F000F8931E9A2C361FB4062E47C179BBA78068
-:108A00005FFB66536CCA8C10BE7FB36C6B14EC6B4F
-:108A10007F15E14FB7423D666184631DEA29E3C7D4
-:108A200037CBD2D741BD6696356081FDF059F7A5A9
-:108A3000C580BF3B6AF5EBA1FF68BD5D03B0D36A9B
-:108A4000CD07D8A9ED8FF037FC9C0AFE503E2D9043
-:108A500098DC546EDAA34FA5CF7B91D3E7DBD70E1A
-:108A60006540DD607E4A2003FC3095AB8C44E0CB52
-:108A7000AB12C60B0B36C9CE887E41B95A0072457F
-:108A8000F57F1E97AB055BB63E007ABA00E469E05D
-:108A9000E57249F3CBBD787DF38BC584DDBF17E468
-:108AA0004EF1FB145EA683FA9A9EC3F43900AFE33D
-:108AB000F4A7FD45ACDF9B85FE84B4E9212EAE9280
-:108AC00059BC40F5291EE289AA269DB72DC43E2E29
-:108AD00080FEAC607F5772B3A737DF2FAB31A05F4A
-:108AE000DAC3F5AFEDE18628908B6F5FDBF3EE30F4
-:108AF000C8B3364B56B0FB97E921A75B15D0290ABE
-:108B0000D789F15115D0252A48A74E7DE3725145EA
-:108B1000181D14BA5469399D947E7EFF5E4E874AB3
-:108B2000C2E9BAA50FD377AEDF5462D08F28EB73BA
-:108B3000C788E7072EF0F57DCCDB4A2A378E2C94C8
-:108B40002FA77E30CFFF69D7B76FBC88F523859FED
-:108B50000ADE96749B62A79DDD62827C6ED3908A4A
-:108B600070F5EA539C7E3A33B32BC76A12EF5C4C24
-:108B7000E9376F93EC40E241EE15F25C83A6CD82BB
-:108B8000F1E9AF642BACABF07FCAC6C0BA15B9D35C
-:108B90006D94B44DB04F48BA21FD15FC0AAF738DEA
-:108BA000E9C6E4CE0FF828781E93FCC82FEF1B927D
-:108BB00095C5BB6D7AA8232A7AAAC6F702C7578E35
-:108BC000928649FD011F870DF49B503F88F8985B02
-:108BD0001FC4E7798F3C68EF177CCE51AF450BE39C
-:108BE0008E12660714B93CC6EB12C7966FC578584B
-:108BF000798E29FDB2E7B817C75DFE1C65BC9CCE17
-:108C0000F453D18B7D314CFE0B97FD09C7297616A5
-:108C10007EA01EA7D053A15B885E0AF451F44BD10D
-:108C20002785AFFFAC5E9125DD316E7D88AF1B756A
-:108C3000A447D02F807C82BF33E8D939B810BF89D0
-:108C400071CDA8A41FF4EE30D7153AA9AF07F32AC7
-:108C50006B0AD07F94391EF7CBC9B2F8BDBD43E291
-:108C6000B3AFA0EE05F6F415D987F69450AD0CF12C
-:108C7000E74ADC56B370947504C8D72609CF1D297E
-:108C8000FE9BFE3CDA29A774BE8A9C8519104FAC66
-:108C90004C4F65FE2CCE791AEEAF3C15288EB205EE
-:108CA000F3971BCFFBE568A80F6EB10BF943E5D92D
-:108CB000BDA8E7F3496005E4BB331E3E543A04F80F
-:108CC000FF8A0ECF2FCCAAB3A3FF3BBD7EE6204880
-:108CD0006D672C4F4778EECB7733F86116D7CD58B8
-:108CE0009EBB01EAF35F45388B41CEDB574B56C83C
-:108CF000BF86BF9CBBE476DA3FDCD2AB1BE07B6473
-:108D0000FD57A5C3208F582CA3DE38D73F3905FA6D
-:108D10009D4DB20396388B5897DC0E72AE8D46BDD2
-:108D200053CE35D6EA98BCCD4C67FE725A3AB31B87
-:108D3000D3B8FC16D6D666C0B982F617A99F82FDB5
-:108D400075BDADDE0F79E08EEB1CEBE873AA68DA37
-:108D50001A4FE5E994C4E2F10A3D31827CEDD70572
-:108D6000EE07FCF7DF6F19500308C8170797B3BC6D
-:108D70001DED0CCDA3F0B90ABD94E797F3E72AF3F4
-:108D800028F7ED83B80AFC08C7F7F4B257A640BC31
-:108D9000707A637A0C09A1FB695817A5F75C6A1F02
-:108DA0003787C907ABD2957AAB0FDB0A5E47DCAFDA
-:108DB000AB4B82FD5C1AD71F0F8DCF4FBE186104DD
-:108DC000B9A471BD785DC7FC0A8DE785EB547F04BB
-:108DD000B833DF93A747BBC3D823A555C7FB4BD3F5
-:108DE000CDAA73732CDE57F44F7DBF12DF77D65DAB
-:108DF0007AFFBC735D673D9431542186417046EF24
-:108E00002F32FDFD4D387F39BBCE603550FA1E073D
-:108E1000FD827DC10699C58B46A66FC7770CF041D0
-:108E20005D61F661E2F05378768BECB0D1F17B575F
-:108E30003F84E73BEE5E2B91EBA490BCEBA9D553AE
-:108E400040DDCE39DC2B12E8F8731BD97914DA6DCA
-:108E500056E55BEF26D8BACEB7FE5D7996527F52C3
-:108E6000D37F733ACFB71CC421D29FE5EDBBA818BE
-:108E7000E50DBC9CFE673D6ECCABBEF354603BB4CD
-:108E8000FEC5C244BA8EEFA5638F0D073DB24463A1
-:108E9000FDE4ACA71A3707BF6B1A74713CA5D3DB8E
-:108EA000E6682BD88FEF3C8BF17AA7DC7039BD7167
-:108EB0004BB39C4870FCF6E174FC4E73346C7784C1
-:108EC000D987637C569FBFB977E190EBE0BAB2DEF9
-:108ED00033BF64FC56F03FB3716614C4ABCDCFC54D
-:108EE0006E1F0A7C36455B4114E6F0733827D63096
-:108EF0007B74CA18BD611CA5DBA9B5937A407E7846
-:108F0000B7AE5DEFA0F33A769445417DE46B6D5BBF
-:108F100094155A3ADE0F78687D32D8C1612504F77E
-:108F20000787F9B5C466C7AD7B949FA167B53EC8F6
-:108F30009BBF817D43F0E31723D9FE3DDF0FBC7B50
-:108F40001BABB375D655787D61385F6F74468CB2B4
-:108F50000F84D70BF3D8F5936BDF1C0FF39D5EAF37
-:108F6000B302BEDFADD7E1FCF3687EAFA1F2786A51
-:108F7000233B2F306F3BCD93ED60472494DF795432
-:108F80007E8D207F0B754E7DF4E57259B891E5D743
-:108F9000F3EA25CCB715F99CE7F41523DDB99C1A43
-:108FA000E9BF4BD4757423F52B801E5DC9EB3F5B85
-:108FB0000FD06784AF07A8E541A19B22174139254F
-:108FC000289F0AFF63EA078C48C41BBC484F6F0107
-:108FD000C98478A1564F32E13C945713E900BDFF94
-:108FE0006B44543FA8432D36B2F681C8A875D0FE15
-:108FF0003522C50778FF55637D07F2AC5F67D871EE
-:109000009E07649B4EA2BF4E8A6B2B423750A871BD
-:109010006AC00FD61AD08EA8ED505A06F33FDB3344
-:1090200008CAFDCD19EC9CB88E54637CA1B4341EE3
-:109030004886F8A5CC1473018E923B36F49804FB55
-:10904000BD65C363EE4FA39167DE86A4495A2AE744
-:109050006583621A52293C2C2391F5F78FC9D551AB
-:10906000B8A626795211856FCD70F6CB08798E326D
-:109070002FBD3E2083E23132C19D03FD557AF34A74
-:10908000F003DF4BED0B347270FC41891C7D5B0AF1
-:10909000C26D3A9202F1F6CD807FF7AEDB1519CEA4
-:1090A0001B33C25C2F276439D425CABDEFB54A688B
-:1090B000CF88CB48F93981CB5FB9D1EC473BB75268
-:1090C00077B6533E52C14E456B81EFE339DB2768DB
-:1090D000FDCD707F5FB2CC7AC288A1E2DA4BB15D80
-:1090E000DB7FAAA8E484321F5DDFF73ABA5ECA5775
-:1090F000C949794D554CA2449E4EED9DB4FDBD9F8E
-:1091000060DE5A2F698B403E4CB7829F92885B731A
-:1091100089B6F34D542EFA434BE5818E5BD4F0EDC6
-:109120005E508BB94A9CE5CEC378F13E2B5B0F7144
-:109130000F4379BD9FCBEB490FA98652D1844020C4
-:109140000A8EC29E1DEFCF00FB5022BB6703BD4EAF
-:10915000AEAD4D5A44E5E7DBCD06C7383AFE94EF95
-:10916000CD28F0AB953CDE271765FFCDB47F9FBDC2
-:10917000EFBA5521F25595C1FCFE59BB3FE541B010
-:10918000337696AF928B7B521EA4E34B5247E7AEE9
-:10919000422A381766E0BE05DBAF18AF0D7F7E634D
-:1091A00072128B53C87AE68F0D5AE2B5C4604BA297
-:1091B000289D46535CF2E05C2A8565DCCFF7E1F33D
-:1091C000615C14C435B699F16CBF87B8C06E29FCD8
-:1091D00055F876193F29CA10D76B8C4407EBED4B35
-:1091E000D65A41FF15BE9EE4FA78D2C8F470A46C3A
-:1091F000463BB5A881D5F51649CCDE2EDA21B1FA69
-:10920000E665FEB66105D8E48AB533D19E2976CCF1
-:1092100046FF817CCDB3BAA2FDB67FC2EFAE2DBCB6
-:10922000267BE653ECD9003200E4EF6AF19262C784
-:10923000287B7E9F11B29F7C557E01C9E8BAE770FA
-:109240001C47CAD36D5AA04B77A303ECF9A2E7D30E
-:10925000D04F92F36BB08EA28C236B63517E57D8A4
-:1092600065E46B695322B1D14B739B243C273BAE21
-:109270002916E1A88E04844B7F7F5D01ACBB731F70
-:10928000F4F77D103EBDE1408E9BD5698C80878BC5
-:10929000287864D583FF3967A678503ABBCC2BB1C8
-:1092A000EEE8229DF990744902984A0DE89D53E733
-:1092B00065FC31D6A0FEF3752DE27AB5683FF3D791
-:1092C0008B46B0FD42ADB76F34F05FB74F263E0A14
-:1092D000DFB25FCEF5D3A1B5DC9E1BE235C416C26A
-:1092E000B7085B24B185F087789D01C8B7A672796D
-:1092F000792882D97D53668C306EAA7936CA4F2080
-:10930000A5781FACD7E2E829CC4BDC2C3E56E46AAA
-:109310000AAF9B8F27EDCBC04FDE3295F687CCA7E7
-:10932000CBFF01FD862E5F8CAB295D8E5F499ECE03
-:1093300064F0F74EFA92BE284F2AFA50FD407F7F24
-:10934000AE85BD7F42A39267F2293C659F8EF86887
-:10935000FF724E17885B21FF39E7B4A0DE28721731
-:1093600000BF47ED5C749E48B76E4E916EB12522EA
-:109370007DBABB447A5C373555E84F705F2FF427D0
-:10938000560C14E0E4EA61C2F85E8B0B04D8EE1DC3
-:10939000238C4F5B395180D3EB6E17C6F759532E90
-:1093A000F4F7F5CD13FA6FD8B84880B3EB7F258C6E
-:1093B000EFDFB454E81FE05F25F40FDAF78400E72D
-:1093C000069E15C60F695D27F40F6D7B55E81F7E5D
-:1093D0006AB300DFD8FE9630FEE68EDD023C821CCA
-:1093E00010C6171A0F09F048EB17C2F851F15F09C0
-:1093F000FDA36DDF08FD63337F14E0E53CCE2975E6
-:10940000FC4DB82F4096A5831CA725B987F7C1BA94
-:10941000CF292DE85FEB1D128985FC67DF242BEA3D
-:10942000FDCFCC030BFB70BBC8E5F80231DF09E7C9
-:10943000D9AF6617ED3C9E18298FC3F7AACED5B3D6
-:109440007A87DAAF2BF15C3475CBDA90E776731A52
-:1094500069421F84634BAC02DCDD152F8CBF6EAA02
-:109460004DE84F70670AFD89150E014EAECE13C64A
-:10947000F75AEC1460BBB744189FB6D225C0E97503
-:109480005385F17DD6B885FEBEBE0AA1FF868DD577
-:10949000029C5DBF5818DFBFC92BF40FF0AF14FA60
-:1094A00007EDAB13E0DCC01A61FC90569FD03FB4CF
-:1094B0006DA3D03FFC54BD00DFD8DE248CBFB9C300
-:1094C0002FC023C87E617CA1F1A0008FB47E268CC2
-:1094D0001F157F4CE81F6D3B2DF4577EE3F0E3BE74
-:1094E000D4DBEC7D57259E1B9BF983304E1747E359
-:1094F0007DA87F9348079CF7EF2ACE57E2C052C75A
-:109500004FC273FFAA61F1F9AB7DD8FB690FC82C7C
-:109510004EACF5BAF07C5E0C1C78A57A12ED955035
-:10952000FE20C59A8EF5C838F4B7E8326D70DE8D2E
-:10953000C6411488D1D8ED90879882716CD2A5412C
-:10954000D71EC736F52188C7C93EEED7402FE7D5CD
-:10955000BF510C79CE5CE25D017850BF1B0DFB580A
-:109560001F4688F528A51D6DA4740C79DEFE88BA07
-:10957000A48157D0DFD1C6B338BE735E5EAF92E828
-:10958000FA1685CCFF18CDBFB4544FEB3C54CF68CE
-:10959000A2FD84C78AF0539E78849FF6D8B05DE31D
-:1095A000C9C4F6598F03FBD77AF2107EC1E344D8C1
-:1095B000E729C1769DC785D7D77BA622BCC1E3C664
-:1095C00076A3A702DB573DD5D8BFC9B318E1D73D75
-:1095D0005E6CEB3D2BF1FA664F1DC25B3C6B106E6F
-:1095E000F4F8B06DF26CC4F62D4F3DF66FF73421F0
-:1095F000BCD3E347D8EFD987F06E4F00E1BD9E564C
-:1096000084DFF5B461BBCF730ADBF73DEDD8FF8192
-:10961000A703E1B37C3FE1EB3EE2BE9D021352841F
-:10962000F2A0C4BFE321EF01E1C8D37D27E43DAA46
-:10963000FC43CD8F33FC39BA021AFE42FCD33363AC
-:109640005D6D485EF0037FDE4391C41B41F5A1468A
-:10965000C3EA02353104DF0F233C3E9FC3E592C4C9
-:10966000B1B87C36C76B0ED7835C90CF4C94CF0FCC
-:109670007E4E9EA5E4DB51296E2993E2312F59E3FA
-:10968000C5BA8399BD873F20C5AD85EBE7AAEF7EBC
-:10969000179F677564C0434A0DFEEEB7423D69BF30
-:1096A0008C75D8AE9E57C5DF93E8B27FE7E924F00A
-:1096B0004725FF90B15EFFA1CE3215EA2D3D32194C
-:1096C0005D7A646A84F6AD145777C0E7647AF586EC
-:1096D0007BA5E0FBFF132035A77A5E466C3A3C87FA
-:1096E0004B9CEFC0AB37B7D0800FE05B89175B674F
-:1096F000B23B25B33B9C97F421EC1E664809B71E8C
-:10970000353E99992C7ECFCCD408ED9F525C7D00DC
-:109710009FE3E94E011F732F1B3F57DFFE02E0F569
-:10972000971D3F9C90D282F456EA1B2B46F0735A49
-:109730000B25651F9CC58946A2C489D83FFD7E566E
-:10974000EF51FCE5E1CE96D9C373D53AB49BD3A5CE
-:109750004807C4DBE7AAEFEF0FFB8577D07C0FF655
-:109760004F153B3A9DC21A0A4F27ECDCC5F4C316CD
-:109770009433B57DA5F711D8EF9B4E4906F9E3A5C3
-:10978000143BAEE743D70F3A9897C4B5E37BAB548D
-:109790006E4A809EF386CAF8FD860F35BE0C494698
-:1097A00079D14B14FF3971545EC2C40B8A5C2CE032
-:1097B000EFE528D7A9BC4D047A7EB76D4826EED3D5
-:1097C000EC1C6A037AD66AD87B75DEF765762E03C1
-:1097D0004AF9706E243AEB457CBF00820BE0DF5003
-:1097E0000BBE5FD02C93C56F84B1A7F772B9FA3066
-:1097F0005E57E2C379C57DC54ACED74ACEEFD2DDEA
-:10980000FB93E1BDC105FB749817919CB62C57984A
-:109810007355558B1FF945EF1039AF6A3AC6CE63C1
-:1098200091B6ACD073588FF07915F992F516F78B85
-:10983000E650FC3AE57C11D095CAF90988FBC71BB4
-:109840006CD1B7D25BDB2869FCB475FFCE8AE7F92F
-:1098500094737DB3880BDB3994DD20D72EEF6A7CBF
-:10986000AF7E1EA9C7EB0BF266A6005C45DA8BE261
-:10987000E97CB7ACAC79279E6237A96EF548A8732E
-:109880004FF4CD7807DAB2F5D209AF0DF5A416F88A
-:10989000D026552FEF499F77FBA611CBA18E3C5EBA
-:1098A000667C2007181FA83C39E598CBD747F5629E
-:1098B00015E04FF502F157F462FA52E294E282EFBA
-:1098C0008174EA49DE3D7F4E843D166D3B9E43A97F
-:1098D000DA698881FAC93CC2FC76B00EC4FCB5A234
-:1098E0000767748CEF675E93F03D9B3312C1EF39CD
-:1098F00074153728F127D53FA677474D4CFE655E96
-:10990000D74B71C70F4C0BFAE7331ADFE0A834F4DA
-:10991000DF1B801EBA02F7A303E0BCDEEB92A39626
-:10992000E272A69B2F859D13E8F403E49229582741
-:109930007C4CC7EA76EA7857594757781AF4C40B33
-:10994000FB5952DEBB3F411C7239BEEEF8C1942E6A
-:10995000B5C022A84B16B86CE1F058C69FBFEFEF18
-:109960002C1FF726133C17A4A6A76465CFE9AABE4F
-:109970006A8864F8287E4AC1F372BC18BF0E66324A
-:109980007BA1E0478835D34A9FAFD5463A405FCBAD
-:10999000B4EE00C887527F53F2E27DF693E80FC819
-:1099A000C5DA2476FED8DF951F3EDB998FA706FD2A
-:1099B000A452C722F9E1EB912EA315EDD744E24062
-:1099C0007FD1971C56E885752C197608B1CEEBC669
-:1099D0007518C05ED33602EA28E82F7DB82E13E052
-:1099E00085EB0A404584AC3645211D86B512B4D3BB
-:1099F000C3600D74BD3B8E111F9CA76ABE30A5D0FD
-:109A000042FB777CABC53CE819D3EB89F01D891D7F
-:109A1000A73F4D847A4FCD854684079F2D3ECDEAE2
-:109A20006787A7C17C6F9FD7DB0C18072C443A28A7
-:109A300075CAB70971C03E68DE67667CCF38B7A5C6
-:109A4000DE8474E375B57CBEEEFCF3AC1EB213800D
-:109A5000A1340F68D7137F48BCACB38A701E09814C
-:109A6000EDF0480A87D4397E6EFE68EACBEB2043DE
-:109A7000C890D0BA1AE98809FB3E957A1F3147622F
-:109A8000789FC874C5F5C5B86CA2CCE8FD0F19E87D
-:109A900075B3D99700F16DF3DC0D0910EF3E63FA51
-:109AA00007D2F1D9BFEB1380AE7523FE827EA48E60
-:109AB000DE1B80FC57EB8B2058FF9A8F75E09BB91B
-:109AC0009F7DF6E297249ED2B32E8FA0FF24DC0F59
-:109AD0002BFD7517CF55003F2FE41B6D60173278B3
-:109AE0003DB4E6A6FF17DF16428F1D34AEF65306CF
-:109AF000BF4DE36A3F8DFDB7D1B81A6078EF14DA35
-:109B0000061A5743EBA37135B42FD0B81AC6415C7F
-:109B10000DEDB334AE86760D8DABA17D9AC6D530F2
-:109B2000EE291A5743FB048DABE17ADDC5F242C43E
-:109B3000A795E0FBF54B4D511AB0AF14FF48A80BA9
-:109B40007DE41C1809F4B8E9BC46E06FFED9480171
-:109B50001E763C26C85FE0FFE19E42FFE09654A1DE
-:109B6000DFEEBD5E807B2D1E28C0501F0ABD3FB1B9
-:109B7000A2408013DC6384F1D74D9D28C0DD5DB722
-:109B80000BE3634BCA85FEC7A3547CF4556A443E7D
-:109B9000B2EF2B5CC837E3F9CAAEE4F409CE17057F
-:109BA0007EF297F2D47075DBB97D35423ED093E3F7
-:109BB000B6B0AF0DAFEF3D32E4958C1CE087866DFB
-:109BC0009B3ADB4DBD295F329ED410385788270E53
-:109BD000287E567EDF9305E74C20977B4AF511C01F
-:109BE0009F5DCE8248809796EA1342E5A8CEEE1E8E
-:109BF00088EF29B8D9FA94FB1F2F9878C57DF427F0
-:109C000040FEFA5CA17FCCBC54D087CBE8482A70D8
-:109C1000BF3648C789F87D27E2AE10F057EB0581C3
-:109C20004DFA0478AE51A4A733F561A0C3B34F69D0
-:109C3000F11C56E77CFC7E65BE91F245535BD6E590
-:109C4000F8EF72B2F134FE8D00BAD06709F8C5386A
-:109C50006C23803EBFE5FAF6DF5CDF9EE17C853C4D
-:109C600016606265F7297CABAB78627406E84D1E1E
-:109C7000C36BDDE427243037B1C451630DA1EB532E
-:109C80001C8F17F8BAD6C2BC14EE3ED92901FD527A
-:109C900016BB24D0B75E4BDA107E96EB7752753B3D
-:109CA0005E4FBECF8F6DCF8A00F68F9437E13A3A80
-:109CB000E9E010E9A8E6938FAF47993778FFE6FD12
-:109CC000206F179C0CFF28AFD909FE22CA6B75B014
-:109CD000D6C65B8703EC7E94D7C9E1EA2C801BF8DB
-:109CE000BAA2BC5E847D7C5D751571FB37D882CFCE
-:109CF00023B62A4DA8BFE94A9E9A38FD1B399DD448
-:109D0000F735E8BC83AC61F44A69157F3AB44D235A
-:109D1000E8F99056D14E7D04BF303FF0495F881B73
-:109D2000BC2E99EF5F211D2775E64BD3519E569BA4
-:109D3000EE3C00F9F6E41699307F3BFE1DB09787A4
-:109D4000461BD09F368F1E951C2A77CA3AB672BA28
-:109D50000FF53A8FDC47C797B90C8021755FCEE4C9
-:109D6000FBE97CAE71B203F6A15A3AFD89CBC4CEB1
-:109D70003B307F3291E3BC7BDCA447E0F9875AA8F3
-:109D80005DB005F154FA1B4A268DCD063E06181F1C
-:109D9000BBA2CF7B9C5FEF70BCF6707E3573F9DEA3
-:109DA000C5FDC90EEE4FDE067F6200BF93C7D7C365
-:109DB000FC4903F7277F047F42DB03DC9FEC077F2E
-:109DC00042DB9CD169456837E12536F4273441C12F
-:109DD000F3040B847529789524C9027F8AE34C0229
-:109DE000FF8ACCB1427F813651809D175305F8A67A
-:109DF000F3D7ABFC94E857861D1FA6F25305023C2F
-:109E0000B8658C70FFF89C49023C2E6B9A008FE974
-:109E10003D538009DF0FCB65BF93DCC8B532E6B98F
-:109E20007CDF4989A70E95C8B86F33F413D911AAFE
-:109E3000B7B9A4739F4C03FB64347CB16995F952A4
-:109E4000857E8CA35A74AE4438BF575346E590B60E
-:109E5000F92D344EC3E223956B1AF7E6BA46611C1E
-:109E600048E3A541C88776B6DFA4EC5B0D55ED3F0E
-:109E7000B98AC4FDA9DCABEC4FDD747D1771597E46
-:109E8000EC35C56554BF30FE7AC674E71E909B6DF5
-:109E90009FD13815E2DCCF7E81F1D7073094EAEB11
-:109EA000D6AF7F81F1EDD64E7D710BFA92CBF5B630
-:109EB000B125B5A98DEA5B4E37C9C1498DFA92C764
-:109EC000D794736CD1348C775A34187F91922AECE2
-:109ED0001FCCEF6F685D6A12DF5B0A897B306E8F83
-:109EE0000CCA0BE4932446ECB786C8672A635AE889
-:109EF0007842AE57CD3750050F538D2F50C1635464
-:109F0000E327AAE0DB55E3CB85FEA6B689578CBBD9
-:109F100015BBAE8CCBD5BA644718BB3BB8458C0794
-:109F200089AB4A38FFD07C6436DACFC6C32B389F62
-:109F30002A043EED569ED342E99D75F9FD055AAFC0
-:109F4000A91F95878216ADA3C616E4A3C22702797E
-:109F500071C87C854659D0E3A656E61FBB5AE74E2A
-:109F60006EA7B7737FF3962A8E93FF7EFED0042AE6
-:109F7000278D6D1ACCB31A5B0A62F1FDC18BB31049
-:109F8000DFA6560DBE4FB6F1D5F1B7D46883F829D8
-:109F9000F8E47CB2D404E7832E507F047296A37356
-:109FA000C65AC3D05D2D5F5DCDABC82F25542CD0D4
-:109FB0006517F547787E98DB55852EBB8F3C8D74F1
-:109FC000DFD6CAF0BDB943F48737B68BFE70F8A967
-:109FD0001801CE39C6E242EA7F71DE1C7EEEEE6ADF
-:109FE00078ABF502764844B8A738FE1AE3826D5C78
-:109FF0004E1A389FB64538A6867BFFA8E1A8BE2238
-:10A00000F4FB0A27AF67F5B993D7B3B83BE79806D7
-:10A01000F35CAAF7686F875AEBE4EA30F30C3BAEC7
-:10A0200051E52D9102FD7E6EDEFAE5F57CDF53658C
-:10A030001FBBBA5FB18F05CA77541C93C29E930DA4
-:10A04000F2819FAF54D19338C2DBDFCBF9A69C4B92
-:10A0500057F1AF8BFB83F378D579F5A5EB619EB60D
-:10A0600032F43BAB4D0BB85D5F8076FD839FB85DEE
-:10A07000FFA93109AE1F18B03509F4E840AEF23D32
-:10A0800058CABD907C5AD1A3F75B3E3685C6FB63A8
-:10A0900038EE3B320F8DED1FC2CFAEF0DCC7E5E7E7
-:10A0A0005D1EF7ECE57ABE9BC73D7E887BFA803D5E
-:10A0B000C8E4F680E5D16FF1B8A789C73D8D3CEEC5
-:10A0C00039C8F3E88F20EEC13888E5D10D99F7E261
-:10A0D000F7C52E242971CF786D383E8FB689766A00
-:10A0E00054BC4990B7915631DE2934260AE3479093
-:10A0F00034A1FFE68EEB55FA2DC63BC34F8979F4A8
-:10A10000D036318F1ED22AE6D1138BC478C7952F53
-:10A11000C63BCA3EC22EAB84E7B1C6E788F1CF2E5C
-:10A12000F885F63718D9F9AC86CC4957B4C37E6E9A
-:10A1300087FFC8F5FB3DCE9F7778FEB093D37F07AE
-:10A14000D01FE3521667E69E77EF89B6817DA8603F
-:10A15000F9426615E6D537725CB67AAA597C7A411F
-:10A16000637650BEEC32B3386B57E6CCF3F0DEFFCB
-:10A1700005ABC906F599033A37C2BB32251B7C6F84
-:10A18000508D5F6EABCACFF1784191CF5D2D5FA24C
-:10A190007FDBD9716D7E5519F71E998475979B5A8F
-:10A1A000083184A92F5CCDBF5EED39EAF1E0C7C369
-:10A1B000F91FF573C674B86542F577476BE04948F7
-:10A1C0008BC6F8E7CAF05DA8C1ADEE42E0EBDE4C0D
-:10A1D000C90AFBE9745C21EC4BBC77F1E3B1707DFB
-:10A1E000E779ADC680FB4E56C11F7D7091D21FE44A
-:10A1F00025939D4FF2B77EF9487FA8F31A657C7FBF
-:10A2000064D7C58171A1747BFC0619ED4A43964160
-:10A2100003F5E686F35AE20F89F71A3B52CDD036A2
-:10A2200064CAFC7A00EDC37337B073AB3BE87CCCF7
-:10A230005ED8100F451EFCE73525E1BEBFF31C7F3D
-:10A240005EEEC53F9B20BF7CF77CB909ECD3CE56B0
-:10A25000F69CDC256D26A0DB818E7566B8BE2B735F
-:10A2600010CEDF9CFD907920C84DAB86EDE7F0F86D
-:10A270004679DEAEAC398F0E8075B7B2BC6CD7F9BB
-:10A28000CD7BA2402FD64B0E16BF307BA68C6F38ED
-:10A29000CFEB4D3E76CE2D97783FCD06FDE9F17B95
-:10A2A0003DC839F1569250FB576815ED4841ABCA8D
-:10A2B0004FB92B511F143E946A6385FE039F4D9C3A
-:10A2C0005C067C33B3F7DB769E5F1A3711F4C2ACC1
-:10A2D0006371B38FDD3F2E58AFC1F7B594EFB0D4A3
-:10A2E000643F70A814EE6F607CCD358BF81CE85B82
-:10A2F0009BB880CED7B0C5E410D67798E0FA76390F
-:10A30000DE9C8E75ED2C03EA61E185BDE6B6903AE0
-:10A3100051679CD8B2DB3C08E87C5623D04DA1C3E2
-:10A32000A83C317FDC91B907C75F38CBE89E4BAAC8
-:10A330000FF567755873E9E060FE95DBC1EAE373DA
-:10A340007D22DE43378AF9E77C557CA4AE9FE76720
-:10A35000CD1927E4573C6ECAE37193BA4E5EAA3515
-:10A3600088F509559D3C575D27FF67E3249D7B1ABF
-:10A37000BE0F17987C4DF1C3501A6BC6E3F95EEF20
-:10A380009320D76FF1F872A8BEEEDE04AA220DB2B8
-:10A390007B38EE5BF03A9D72FF55E325AB97C40D19
-:10A3A0000EC98789F604E4972B618F13F9E265E7FC
-:10A3B0005955F376156F28FB23F945CCFF3C63FA1A
-:10A3C00010E38BC6AF597C013F6D3D60BF9EA01F5F
-:10A3D0006EFE5A8FFB276F8F66FBDE4ABC328938D0
-:10A3E00071DF667CDE79ED6F6CB09F7367F67CDAA7
-:10A3F000BEFD5923E6996F77E69975429E99CFE5A0
-:10A40000725BBBC61B0BF941ABC14742F6DB95FE45
-:10A41000C6F6F247B2410E031A94C3E66FF504BEC6
-:10A42000BFD7B8DD8078379ED5633CBA6DBB89C98C
-:10A4300035AF3F2BFADACAFDE2A79C9F07B85FDC75
-:10A44000CFFDE27BBC5EF30E8F5BF6F07A4D338F6F
-:10A450005B7681DFA4ED9676AE774B4C1C4F569F12
-:10A4600055F0BCAB4FDB112DE56BD57783D7403D65
-:10A47000EA36B7A80FB74E15E3937159627C32A63E
-:10A48000B7588F29494A13EE2F8EBB41E82F320F60
-:10A4900012ED9676B8003B2F8AF1C984BCB1A23C7C
-:10A4A0003943E213CCAFC57CF796D07CD70E7C62E3
-:10A4B000F9CCB6D627D04F6C3B9E1A1DFA9DE0AD65
-:10A4C0009CCEDB8E33BFBCF5F0394B68BFD29EE229
-:10A4D000E3CE707E9CE5FC9894E0BC238BCACA85D1
-:10A4E000E3E7F470FEA32B3956EE57EE3BE5FB2A6B
-:10A4F0002AD4EF7D0DCC08393FF46DE31719684F6E
-:10A50000AE512F6A2DECBC5B831489EFE15FEDFD4A
-:10A51000962559A95C29ABFBB3FDD1EA21D06ED0B9
-:10A52000B912E13DA806C9356D3EECF3FE561FF6A3
-:10A53000EF4AD46649CA39F426F00B32D76FB249D4
-:10A54000D2827C4570F045E2AECDEA0E45B16A1C80
-:10A55000249B5D04D6B545479AC0BF1327B1597BEC
-:10A5600010B655469FF3976CF7C3404F29C0F6913C
-:10A57000A95BC5EF7EC0112DF8FE16B4B05F663042
-:10A58000B2F70F22B3DC8FC3FCF05DDBE881306FE4
-:10A59000411ADB4FF5A39D9EC6E7D598B627E3B9D0
-:10A5A00055759EC4EDB5A2779D74AD14DF4B51DB9C
-:10A5B00059A5BEBBCDEE9A162E1F7D258BE59F4D6E
-:10A5C0005F8D97E1B939C62827FB3EA45386F7C1B2
-:10A5D000B69D18639A1146CEF6F69BF10AAC4781F8
-:10A5E0007302F532FF7B151AB1CEA5F103BF2F9888
-:10A5F000F5A8D74361C13197CFA7B6CF798755F674
-:10A60000B9739FBF4E8273679DF2040C01FE1F64F5
-:10A61000DFD5B89A3CA9F7EFBFC84AE5EF4D557FA3
-:10A6200001E74CE468339EB3D972D0B84EB65F9E52
-:10A630001F36F0BA9F1AFFE6CF6627621DE993D94D
-:10A64000ACFE07861DBF9B563D05DED3EB8461FD46
-:10A65000D00F1FB4C3EF002D60FDA315B86A0AC464
-:10A66000AB5B47B0F19F6F0A3C0DDF05DB7A07EF6C
-:10A67000278FB1F10AEC5D386504C03A568FB9E511
-:10A680003536FEE2F5CE2F803F9159CEC320A7AFDD
-:10A6900082EED0B6E87AE751B8FE05C8186D3FEEF5
-:10A6A000EB6C837E05EED6D7F965687F6367DE2B9A
-:10A6B000D6FD8728F1E0E1727E5DCD77C5AF5CB94C
-:10A6C000DEFF2197D30FB89CBECFEBFDFB78DEFBFE
-:10A6D0002ECF7BF782FFE803F9B083E7C3793C1FF5
-:10A6E0006679D7769EF7BEC5EBFD4D3CEF6DE479FC
-:10A6F0006FCE271359BD1FBE3B2841DEDB2F6CDE1A
-:10A700003B214FF42BA50ED1AF8CCD14FDCA685B55
-:10A71000A22A4F4E53E5C93708FD85C641AA3C79A8
-:10A72000B82A4F16FDCA8DED635479B2B87FFC4547
-:10A73000968DEF27DDAECA97C57DE4201FBBAA47E3
-:10A740002F0ACBC7AD2D8B0E5CCBBECDBFBB7EF130
-:10A7500021E7E3079C8FEF2BFB369F7C8CF9DD858F
-:10A76000F384F3F175F9FF62FD6242DEA4B07C2C44
-:10A77000754C53C9DBCC2EF8F84FEAA3F9CA75A87B
-:10A78000FF943ED6B6C4307DD42A75A8EFE470F1AC
-:10A79000CCFF357DA471C163D9D7A08F6AFFAEBC51
-:10A7A000B7A8C40D9D71028FC7947C690BA5157C59
-:10A7B00077A22141CFBEBBA175F784B843A1D7EFE3
-:10A7C000B259BCD3F8C502D48BC1E0CFC3D0F55584
-:10A7D0003EEED56C2BB6F09E64E440382DED65F16D
-:10A7E0004FF4382B3B5F4502F01DAA2BC44DAF66DA
-:10A7F000770FC64B5A6B35013ECA068D17BEC34B49
-:10A8000064239EBF6B80380ACE59ABE2A82FB3ED0C
-:10A81000CAF7782598F70B3EAFD4F22E9EF3FE4B85
-:10A82000B6730BCE5FE868877DC8C6237ADC67699C
-:10A830008C60DF4351C75B1F6667F0F79719FDE037
-:10A840003D805F803F850FC6A2FFFD52F49F1048F8
-:10A8500050784324EB0F647F35C59B14F4D79FBF1A
-:10A8600076FE69F8BE6C86B9E74C383F20ADF1C67C
-:10A87000B07D4B3FEA973A6EEB32FE55C5697FCE0D
-:10A88000747E0472720EFC72773C5FE5D40EECFAB3
-:10A89000FE0D91AE7BD877619C323C57A153A7FD4A
-:10A8A000CD6671DC877CBE4EBA287205DFA98909A6
-:10A8B000791F5685BF42AF1507F704E028E3CF5D47
-:10A8C0008FB28E30F2E3BA4ADC7D0EE8A0961F32DA
-:10A8D000CEC1DFD70D1FF7E9781C19CAFF61B82E6A
-:10A8E0009FC27F327220BC07A3BCBFCEECA1F2EEA8
-:10A8F0004C8CB5CE6AA77A74678B8CEF1F12BE1F83
-:10A90000AEEDE467BE04F6495B2C91D890784F5DBC
-:10A910008754C7A9EAF365F9677B0AF04DE75355F9
-:10A9200079E4F5AA3C73902A0F15ED51715CA130C2
-:10A93000BE2469AC2ACFBDF239002DD12ADF1BE23B
-:10A94000FBF6920DBEC3A365140AEDE7DF0362F4C4
-:10A950005ED6451EA49CA3FD4BB60DC775EAC75A2B
-:10A960006263FCF30A7F1F4A1FCFF8FBF860C58FB4
-:10A9700039B0EE6EF0CF657FEFC921BE4FBCCE631C
-:10A98000FCBC4807EFD990CF8BD2F1FC0EB62F78E4
-:10A99000E2B15DEBB161FBAC2713C7ADF138107EBE
-:10A9A000DA9387ED531E275E7FC25382709DC78561
-:10A9B000F0A39EA9D8AEF2B8F17A6FADDB0B7F1F82
-:10A9C000B1F74A82E74BD3EBE8F342E89CB692E258
-:10A9D000114247BBD72AC0BD16C70BE393AB6D42EC
-:10A9E0007F6245A6D09FE07608F07553F384F1DDD1
-:10A9F0005D4E018E2D2911C67773BA04D8E2982ACC
-:10AA00008C3765BA85FEDD370D8B6EBB823E3FE12C
-:10AA1000711E013A3CEA711D29C2F7A44A105EE595
-:10AA2000998AEDDC7EDD50AF62B401CC8F6272ACEE
-:10AA300060B121BFC5FDBF58AD43EA16327F6C0936
-:10AA40009D4FC097CE27D4277D389FC5E13A22E29B
-:10AA50003D55B88F3E0BFDE4043E66A49C64817CAA
-:10AA6000EC607E2C7EB7F5119DB53487EAF1479FE7
-:10AA7000B0EFE4C21626096347BFE6718DA99F11A6
-:10AA8000F3C5094F4998DF11C2EE9FDD92E608FD3C
-:10AA9000BB504AFBD1AFD977874CBBB7D9403E26D4
-:10AAA000E4CF888D08D97F99E0FFA92801E71B3002
-:10AAB0003882CACD843533F433B382EB53C6CD7EAE
-:10AAC0004AACFF06E5DF67E4711CAED3C0C7AC4AF1
-:10AAD0005A87D757655E79BFE60C5FD7291EAF9DB1
-:10AAE000E071F7715E7FFB92C76B6D3C5E3BCAEB1A
-:10AAF0006F8779DCFD39AFBFB5F27DAB4F79BCD63E
-:10AB0000C2E3B58F79DCBD2A7333FE9D980B9BD8C9
-:10AB1000DF25EA0A9F7B368AF1DA5C9F18AFCD59B0
-:10AB200023C66B77D789F1DACC9562BC36C32BC6C6
-:10AB30006B772D16E3B53BAA45FB38ADA250806F6D
-:10AB4000738B75B95BA78A71B7C2A75B5CA29D9C2A
-:10AB50005422C6DD5DADF76DFF68DC7702667E15B9
-:10AB6000E20F43BE0B2F9C7BCCB13A0B61FF2697C3
-:10AB7000B86A61BFE6464DE010EC33914F65FC1EAC
-:10AB80006413DC3194EAEB85C1E326D842FC8E578E
-:10AB9000949FE987C5F311B7DF27D2B5AC52AC77E4
-:10ABA000EA4B44BA3A93C4F36793547E87707FA804
-:10ABB00067BF9322D795FD90C65489EF2DFD5C7F2A
-:10ABC000A427EA7364CC1FE17353857EF447C6FE65
-:10ABD000EC7DA5C1FC7D859A88211FC0BEDDEECF2E
-:10ABE000D87B0694EC81DEF4FE9B08A3B7DE380A1E
-:10ABF000BF23B743C7DE1FD89560762CA55D375DB0
-:10AC000064EF09900E2D9E2373C3FB23A930AF7808
-:10AC10008E2C37A015CE99E955FD89E013AF880F2A
-:10AC20003B4FF79FC3879FE3E84FFAE3F988B6F0FD
-:10AC3000EF1D74C6712AFF1CBCCEE456B147397EA5
-:10AC4000EF213B5D578E2A5E32F075694CD3F1FBE4
-:10AC500063864F09BE7F9FA7F1C6C277B6C8390D7C
-:10AC60007EF7650411EDC2E47157CEC747C58B76F8
-:10AC700061B42D4D95F7DDA0CA0B45BB6020AA3805
-:10AC8000A78D9D4F34B09585F623DD26F78F51DED5
-:10AC9000DF417AD51C5B81E7EFB625F3F751B85C4D
-:10ACA0000DE7EB1D9EC4CE2FE6F17A71DE0F8B64AB
-:10ACB0000BBD6E385ECCCF312E71601C7B96F12BB4
-:10ACC0008FFE037EE69110FE013F0F8BFC34A8FA45
-:10ACD000E7807CE586C387C9D57F1E1F7E8E529193
-:10ACE0002F73CC55F6EDC2CBD788805386F783DE21
-:10ACF000B14AB82FFD4EA03A00DF89FC319ED5271E
-:10AD00001E4A9AA865DF6D719A4752BA17F375E625
-:10AD1000F17DB1460F09405CB2C563C496906A3CB0
-:10AD20001FBD227E512CF8CBC61477229C076CECF9
-:10AD3000DE6D199C1368D0754B0AF71E41B36E087F
-:10AD4000FAD7C6E6042D7C577E84D6AA85FB462416
-:10AD500095CB90278E82F74DE20026B81FB6C5E34B
-:10AD60000F14E1B950379E1FA2EB2884F8B5C83AFA
-:10AD700003FFDE63F32754FE6D101777C37DE3BD39
-:10AD8000DDD9F96B83959D6F2D8E63FBB0390EF67F
-:10AD9000FDBE9C24B3C307D3C5B3EFF854D07F974F
-:10ADA0005283FE81EABBF07D9F212404B6237F04F9
-:10ADB000F839357F54E71157B4F273736DE1F76BCF
-:10ADC000FECCE309E57CFB611E4F7CCEEB3F0779AF
-:10ADD0003CB182C7137E1E4F1CE2F1C45E1E4FBC05
-:10ADE000CBE3897D3C9E789FC7131FF07842910B7F
-:10ADF000C34A6233C07BB4C904EBF2F1CB245F09D0
-:10AE0000ECB3BB196C98C5F64F7B25D5B90AE2A007
-:10AE10005FE718057239D53B12D6113FBDBD02C69A
-:10AE20002524E96D4E3BBC9FB40ADF2B51DE0B9B02
-:10AE3000C5E5E6367731DADD595C4F88BC3617F365
-:10AE4000D33AF1FB71096E5DF0BB49F4FF0C157D3F
-:10AE50006F537D57492F317BF1BE6277079141A136
-:10AE6000748FE7748F98C1E90E2F5D85D197359C5B
-:10AE7000EE0A5D9A6F1A6661EBA810E2C243F963AD
-:10AE80002C206F2D497C3EFEBE8C8B3F6722D70F56
-:10AE9000655E657FF6F1822B9F6FFA888FEB848168
-:10AEA0002FD121F3143CA883EF92DFEAFF6532E84B
-:10AEB00049F07D1A07C6E123E5FC3F423E1DE0EF65
-:10AEC0001F28F6720AE1B4523DEF90E7CAEFED1C7D
-:10AED0002A18AB83EF764FF6FF12FFDE83415B1D2E
-:10AEE0001F7ABEB785E3F750D9BDF877E00229EDA8
-:10AEF000F8BE9AC165B0417CDE2BC9B11CE8179F32
-:10AF0000D456C4EBA12A7FB5B6390EE4AB1FFB368D
-:10AF1000E2FF072D97429600800000001F8B08007B
-:10AF200000000000000BED7D097855D5B9E8DAE79F
-:10AF3000EC3364E484C98326B813A658194E263826
-:10AF40000987B003C1460D7002018284709230C43B
-:10AF50008A367632BD8F363B24246110F03EEB8377
-:10AF60004AF080436B3FEF355AEBEB40FB4544E53D
-:10AF7000BE673128B4D8DB62982CB7AF03566BC7D5
-:10AF80007B7DFFFFAFB5CED97B7312A085567B0BBF
-:10AF90009F2ED65E6BAFF5AF7F58EB9FD63E6DA56B
-:10AFA000255903A98C2D0DAFAB645319FB00FFCCC1
-:10AFB00066CCC354632097E11FC7070AFC3FCA341D
-:10AFC000753A3EC7279676F64136FEBF9985D3E09F
-:10AFD00079E5C7FF83A533B6983507FAE0BDFEC211
-:10AFE000C0281F8CCF6A5C67B17F2EFCFD20273EF6
-:10AFF0008F2C1733F5AC79BC9420F4F78A3AA3F977
-:10B00000E27568EFEA669A671854FE04D08D86F7F9
-:10B01000B14D83E72A4BF34D86792B3FEDD5A1CC7B
-:10B02000C974D47B605D0BB33EB5928D843EF33D15
-:10B03000BE09005757A8E8270550EFD2D769B83C9A
-:10B04000ECB70EFAFDB0ECBE2C6D721CAEAECDAC02
-:10B050003402F374657DCEBF360DFBBDDF1AC17EB1
-:10B060002E56D30BEB3A31E7FF65669BFA3F3DADB9
-:10B07000ECE6C02818B002FE3786B189EE484E6073
-:10B08000F2C5EB65CC600CBAB495263356C8D8E946
-:10B090007A25EA01406ABA017F53B1FD42133E8F1F
-:10B0A000747BB42D0820D353E7C33AD77014B0C8CB
-:10B0B000848EA23E58EF9A6E4E37F6A0EB34E2CF64
-:10B0C0000B7F11BF59CDEA6933FE224C3D6DC66F2F
-:10B0D0000D33B543DD8D7300BCE581B4916FDF0C9A
-:10B0E000FF2E60051F3839FD11BF35A26F52FDE2FA
-:10B0F000610CD6C3FC80BCE28BD7B5FC774ED6374B
-:10B100008211C3B0A2F8F337578F4B8EE07BC8375C
-:10B110005EC157D388669A1BF82A199FE460C9DB81
-:10B1200061692F105FB5B8E27C96836CE63262707D
-:10B13000E758C66308EF52731DDF37F4E3E301FEFF
-:10B14000958CF3C7CA505325F227FB0CE72F2F3CF1
-:10B1500014E3C4F90FC6A90ABBE27526E8355AC044
-:10B16000097F96943FD6FB6F30FE633BF3E7235F86
-:10B170002DF9829339A15E0DDDB05E5DA344A380FD
-:10B18000D3A5A15B889E4B6DFC9D5C6D1DFFAD0D35
-:10B190000534CEAA4A180769B1C1D44EF0ED247C1B
-:10B1A0005631DF26942789D7B7B3D97806787C61E2
-:10B1B000F7BABDC82FE71EF0300FAE1BDF05BCD6B7
-:10B1C000730AB2E3691CAE9F6E56A2FB61FCB3BB6F
-:10B1D0003DC4776FAF51A20CE9CF7C4FA0BC76077E
-:10B1E00032689E734991BD9F87F686AE9480017840
-:10B1F000EB1EDE7C4F18E63D9711A9C3711ABA6E9B
-:10B200007618D83FD9F0E6E0B80DCEC07E9862B986
-:10B210000A381D0E25FCFB0628EBBB4DF482FF8E81
-:10B220000614E2FB050E16E94DBD987F92F2149AC2
-:10B230001F11EE31C1BF20C741F09E78D043F0A668
-:10B24000E469344E7D30494F4A473A325DCD077844
-:10B2500032F5B108E75905E413F8EDCC12C540FC0E
-:10B2600030800BDF77DF70FD3E94A727C43ACFDE36
-:10B270003F632CF2F3990CDE7EDA9F1CC5759DD6D8
-:10B2800078DDF0A7461F477AA891DCA5697C1D0AE6
-:10B29000F0418380AB4173E84940DF860797DD8545
-:10B2A000746EF06FBB17CBE369469A02EFFF74B779
-:10B2B0009321BE111FDE7C6C2F5987ED76BCFC3AC2
-:10B2C0009043EB41FC8D00BCBDBDAB3D2D82FBA688
-:10B2D0008F45DCA3E378A8DFF9BFEF53F07DC6F715
-:10B2E0005FAF90138599F663E0DFE59ADBA8807184
-:10B2F000D8A1F1C4B7CB7D9CFFDDC59B46E5F06EC0
-:10B30000A931FED0A8BE0DF7F70651AF47BE05BC68
-:10B310002E4779998AF8183E1DF79B9AD5D67D79E4
-:10B32000D3C88DF72F8675AE09BA9813DAD7F855BA
-:10B330000B5F57B558F91CD66DA9FBF218D1A17B4C
-:10B34000B8E0CF4ECE9F8C85C786A7C4F9E2CB016B
-:10B3500007E107A1730D817F3B5E3F6A78388DFC62
-:10B360000AE7CD992C6D6F318C77A61EF887C3C57F
-:10B370009C2679A8EFF610DFC3CEEE463C017FBADB
-:10B38000ABA6C4F945E2A77E571BF163BDE0BB86BF
-:10B390006DC03FE9263EB2E10BD7ACCA79C6C5F90C
-:10B3A0008CDA13F0D977021C6E297FF52C5CC79CD0
-:10B3B00017CBB52C89CE2548CFBB6A8C4C1CC52039
-:10B3C000BAEE282D1946FC2EE8A1C6E9E145BAA53A
-:10B3D000CBBAC18EE17E9E26EA192DCA9BE505D027
-:10B3E0005FD0C9533E10ED83A6E12DCE37CB475039
-:10B3F0001F4D85FE23043ED881194F4F1C1D3F6F02
-:10B40000D2C479A03A33C7607B3AB3EA3D236CEBF0
-:10B410006785AA3837F839FB80CB3706F7E364B184
-:10B42000BFAF9B374EC17E0F280AED3F9E0AD5C2A3
-:10B4300027AA4D8FC9C97388FDCE90FC4DE7AD5B3F
-:10B44000E83349631C2417BFC984035589E3C3CD7E
-:10B450008760C3FBB4DE3E68AFF37B035186F0F236
-:10B46000F3A10C88D067E2AFEACA14D66782639E64
-:10B470006F84A5FE71FF0D96FEB76AE32CEDB7E76A
-:10B48000DE6C699F1F28B0D4DDCC74AE239C031CF6
-:10B49000EF6E816753BB3C97FB918E8BC53A76B8B4
-:10B4A00023FE30E06BB17F2DD1A3ADF4137ED44BDE
-:10B4B0003D7E4E57B7D0279326ACF6911E51C9E575
-:10B4C00027087F910EED38C898389FB96DE7AD5DBC
-:10B4D000FEECFA64631EE83D2950F918FB18E93DBB
-:10B4E000A9C313EA3776FD0DCE0807F26BB2A0D7D9
-:10B4F0003C672A9D1B5DD55C9FEBCA5DC4F5A5DC4E
-:10B500004F125D17887ECC7090DEBA54AC5FEA5F54
-:10B51000AFB532D60747F38E12AE672D0D5EA83653
-:10B52000EBE5B2DC82FD26C5EBC9A17DBA9E40CF1A
-:10B530006C13FC95A2F3F6A55EA6E23924DB378AEC
-:10B54000F376A938B717821C23DF86B1349DCFDB91
-:10B55000C538DB63FCCAFAF361DD4E013F7B4A511B
-:10B56000110F49A2BA8F45B6E715219E0DEAE44CAA
-:10B570000D3392EF3F0176A1DF02D1AF2C6F75CF73
-:10B5800067817F3DD56901B42D3CC1FAC7BF54889E
-:10B59000FA514AC0A1C5F99DEC0EA88FCCE5FC5E1E
-:10B5A00093E90D50B3A11F1B0FE3558BF66A21CF12
-:10B5B000A35833C9C145768C97F3E5E0760CDF7F5D
-:10B5C000E47C1EB1AF30E78600F15D98EFFB0EF82A
-:10B5D0008B7CB7A4C6CA57CB2243F3596F9ED0AF1A
-:10B5E00067B019C46791F5C4171ED167C7D88361C6
-:10B5F00092F7A09391BC0BFB46EA9D47822F12FF66
-:10B600001FC91D50F5D438BF487D7C41C8A947B13A
-:10B61000BD9825FBE01C39E21AC87C00FAB954D663
-:10B62000A7E2DE2BF4F2F4E0B2DB7CB0AED78A5FA7
-:10B63000F19D4A6583EAF3767E9F08FFC07D7EF325
-:10B6400084B7FD08C76617345D8FCDBFAA4178B6B1
-:10B6500063BD04FB9FAF2983F6ED49B2FEEE2E6C6D
-:10B660007F2299D77FF5CC1F771921A207F14D8A48
-:10B67000C0778AD4CF279BF00678F68ECCA77DC4FE
-:10B680006BC3A75D6F770A7DDB69937FFBBC67A502
-:10B69000BC0B3A0CB6EE8BE005D6FBD8D07CFF8B0A
-:10B6A0003C3A0F9B2D7C7FF1387DA49FAF10EB7649
-:10B6B000A41CC88A2490DF18FED7BB7E6EB6070094
-:10B6C000CFDF5450AFD5E1EDE99C55701C25F8F261
-:10B6D000EFF17C577619C3118F4EE880E7B80B2C39
-:10B6E000408447CA6312F28113F1DE47ED709E0E6B
-:10B6F00028E370905A1FF2A702FD3F40FC5CEE3E2B
-:10B700005861B513DDB87E18CFDDCDCA3CE9683786
-:10B7100036EEDF5C88E7983B40FA57F78532A41392
-:10B72000B4EB1E2A2FE8747EFB1D9673E585D23F8D
-:10B730009C7F1458B3B3DF19F0C07B1DD800F074A0
-:10B7400086BECD50BF7E77320BE0E2EB22BE796E33
-:10B750000DE5A1EF44C784387C275A597FB92B5E89
-:10B76000EF3F98E4D660B111E35E2FD2E5AD0DED69
-:10B77000539E433B3BE8F1A1DED6BFB1DE40649C63
-:10B780001863F4224EBBD40843FBDDBDE17FCEC37A
-:10B79000FDF384CB080C87B27BE3CEBBF1BCD2B502
-:10B7A000CA8A6C807B7FB75A114D60CF7C229FEF95
-:10B7B000AF475EB873FF66F4378C710792609E01E5
-:10B7C000F45F00FDBA5C46168E7FA2AD3D0BE5A38B
-:10B7D000ABBE2B7010FBB5790234FF6E6F0D8EDBA4
-:10B7E00095B5D6BFD634BEF70677333EEFBFDEED54
-:10B7F0001E47EB7927CD0FEBE8DE50300279B373AB
-:10B800008C7B6C23B637AC631AE8856EBFE142FED1
-:10B81000F2AA6C17EE0337FA2F7C7F06DA439A639D
-:10B82000FAC7A1FF7D8148793ED0B1A6E5D43CD8C6
-:10B830000199BB3C63139E3F9D024EB90F49FA0E1E
-:10B840008C69F062BFCE4823F7B3F81DF548E78551
-:10B85000631C61DC7F3A436BBC13C5F375E917E3E6
-:10B86000A513FD2AD3104E58D714ECF77E6B04FABB
-:10B870000D64B96B12E13122F0E86D5F97D302706D
-:10B8800077EEF6FA103F9D4A64573DE0CBC84E0D67
-:10B890003CAE5DFCDE53E23DC91F402792C34F3CE6
-:10B8A0003B7AB7311EF5514E47C08BD7653A179F8B
-:10B8B0009E56B626DFE4BFB868DE319D741E742A3A
-:10B8C0005CAE9F7A76EA6E03EA8140E46E7CAFABB1
-:10B8D0001B78791AAD732CEAF383C9CF8068EF6CBB
-:10B8E000F3D44413C8FFC06A279B348C97D74139DF
-:10B8F00071A373AC92003F03590D39D9781E40BB38
-:10B9000003C619D8EDE5253CCF81E76F0EC29F53E2
-:10B91000F2F9793E796AB81DE9CF2647C88FF772E8
-:10B920005E7813D5D94E3FDA171F01FEDDF321E112
-:10B930005F3A0F23F937137F31DF708B5E3AD8FE01
-:10B940001916FB715BE91F9AF0FCDF5AECD13C261B
-:10B95000BF9FD4939327737D243CE1B100ECDC6C52
-:10B9600071701D3F2F2BB9FFCF077F13F9FFC23630
-:10B97000FF5FB2AD2EF5CF43F9423F117A70A6B604
-:10B98000333C07ED8B579D8128D03D0B5F1889FE16
-:10B990003125DA976D82F726B78097EB6B0BC57967
-:10B9A000F4A3562F2B9FC06276DB72B18E054DEF4C
-:10B9B0003C8676F402A16732243ECC5F3D999FDF3E
-:10B9C000D26E5B849D814597E772BB002C2B7EDE97
-:10B9D000382B8B901F1632AB7EB788D9F4B9D55C63
-:10B9E0001F93F6DA0A9BFE60B70BAA6DED3B60CEA3
-:10B9F0007ED4FB54B04600CEF782053B0A00EEBA77
-:10BA0000E0A14D0309F69BE378DEC07ADF68D5DF5D
-:10BA1000EC80736753F5D7BD03F0FE56B5D78B7234
-:10BA2000B2B5F2D36928275B6B9D248F475B2BA8A7
-:10BA3000DF6BAD612AFF2B3F23E6FFEA93F601C0DF
-:10BA4000B120A0BF8FFB8AD4D3AA2BCBDEEC30D1A0
-:10BA50007751F9AD967A3854F56687DD7F897CE6B3
-:10BA600064CD89FC6E530BA47F45B7F83999F3A9CF
-:10BA70004024417F59021FBD67C6576A8155BF3DAB
-:10BA8000129C3B6C28BD46AE5BE24BE243B60F0610
-:10BA9000EF6FF2A51DF297C19B7385F0DAE194F088
-:10BAA0000FD63F8C9B5909C2DBB6DC48453A46F2BB
-:10BAB0000B00CFD515192FA14FE20D95CBD31B7AD3
-:10BAC0005AD400785E9ACCEDFD945C16453FAE9D4D
-:10BAD000CE2915F5F3705FBB14BD93430AD9A14B72
-:10BAE0007425AAC33F6F1176E996C98CECD2B6D201
-:10BAF000AF1D4E2BC478878B897DA672BEC98E4A36
-:10BB0000A9E571881D6E16E8C3F7A6A40636C2F330
-:10BB10006A944394CFB0EBB4D90F0276D069B31CCA
-:10BB2000D9F79B145BBCA1AA40E8DFD301EFE3E2A5
-:10BB3000781FCC0E198C4FC07A28C2F3CA8EA77B0F
-:10BB40006CF8B1C723C207AAACED9769FFECEF2EE2
-:10BB50007C6924EA1BE54A6002E0E3756C82F79297
-:10BB6000F56728ECB1B940F0A5B0EBAAA55DB70820
-:10BB7000EC7920C111D40B86515C692CFAA5E3EB5A
-:10BB8000E3765C20A07FBAA06870388E89F7BAAAE5
-:10BB900012EB0BC7505F98C6CBEBA09CB8686E56F3
-:10BBA000227DE1587123D717A01DF58463BB2B7844
-:10BBB00009CFCDFA02AB28B8045EDA68BD49130A92
-:10BBC000872592BBD7A7457622BFCB7A4A6E332B07
-:10BBD00037F149539EFE4001C535B8DF41CE07E736
-:10BBE000FC21B33E669FEF997C1FC773C5083A37A7
-:10BBF000647929FAA9BE66867CB6D5A5D7609CC0B3
-:10BC0000EE377AA680C727BA73F4266C67A9F9972E
-:10BC100018B74DEED7B979A34D7E4B9B5D28EDA8A3
-:10BC20007DD868B20F551FB70F93332F1CF241D345
-:10BC3000DA82C8F388AF5917A286A310E3A90AE9EC
-:10BC4000519E4CE622FFC9E5DA6397D9AF7B23DF2B
-:10BC50007FBA1AB8DFBD2C4FA57A72C4B99FE248EB
-:10BC6000C25F1316CB48D6DF217B6C01E803C23FCD
-:10BC7000437AD509E1D70AB36617DA7DA9AEA8974A
-:10BC8000E2BE36FF4C4DA6A36F22EC1F35C10BD58B
-:10BC90001AC539ADFE9D1A2DE7D028D1EE83724129
-:10BCA00098FB7B96A2BF07C7AF8E76E7E0BE165023
-:10BCB000033AE3F61E9EB7CB1AEF9BF29076F5FCA3
-:10BCC0003DD28F24F546E9AF82F3A57B04D265AE61
-:10BCD000A2910FC0E60FB2FB7FC2C21F63F713D958
-:10BCE000FD42BF2DC8267A483D4CFA6BDE2FB0EAE4
-:10BCF00063FF09E281FDB614C35106F2BDC5C5B2AA
-:10BD000076C2F8E9FAB2DB705F7EADEC151FEA1B74
-:10BD1000FF5960F3675EE6FEF663D887CEA0BEF6F5
-:10BD2000E21817EADD55CDF5E437B4CB89BF90EFC3
-:10BD300073C985A99678717F6B8B783FC9C0F3A6CC
-:10BD40006ABC3B9A046BAAD2F938972B4F1979FA3F
-:10BD5000C8C25164978CC69205C02E99827689908C
-:10BD60007BC1DFAC7C143B638E937AC15E4933C3E5
-:10BD700021D67185F3238DCDF35C0A6F3B4A4BBC12
-:10BD80006EF447002C4ECE57BE989F3E07FD3BEB0E
-:10BD900035B35E5187F18902D43F158A53C8E7262F
-:10BDA0003FB98AFC9B9C19D1C309F6D5E5850E4B9A
-:10BDB0009C34E667CF65141792E3A8CCDF46728007
-:10BDC000B22AE17126F0C70B781B259FB380D78379
-:10BDD00071DE6D4EC6F30FB89CC8B8835A1CAEC84E
-:10BDE000C6F8F02625601014358750BF5F2DE4C8D3
-:10BDF0002DFC70F678D16A2957CEF5A4A735EEB49C
-:10BE0000C6D1EC7131BB7E2EFDFA2A4C82707F5E6A
-:10BE1000D2090E78E7D078D847EBFC3BC583E4C362
-:10BE2000CA82BBFC98BFD29914D9558FF1EB1E2F53
-:10BE3000F945BAB00BCA4B1FFC457F7B4FF0D12DA3
-:10BE4000F05E77A193DEEB54783ECBA1319FA3FD4A
-:10BE500043F259B7E0B39B0A35EAE7C57D09448848
-:10BE60006572BB56E6AFBC3686EBABEE10CFFF7902
-:10BE70002AF3D0EB65042DCF63C90DC5F358CA0072
-:10BE80003F5304FE7227AC263B764A88E7B14C7ECE
-:10BE9000CE6AB7DE9EEBB2D473ED76ABADBEA750E3
-:10BEA000EC7BB6FC95783C6D11E961127EBB5C7D44
-:10BEB000B595C755BE06762B964FB5FAA8FCD75652
-:10BEC0003F95BDAD1AE969CFB6E672BFBBC0FB5660
-:10BED000D7053A17CF65B9290F42FA29A5BFFC3B10
-:10BEE00085DC0FC5421C9E85624DF39C996918E75D
-:10BEF0003A1AE2FAE160FBCCE20A6B3C6F49D81ACD
-:10BF0000CF5B56638DE77D7AAA7EA010F5AAC9BFE4
-:10BF10007BF551E479117F5A23F0B0E3211E5F9243
-:10BF2000E31FFD02A7BFAC9F1378F83EF207C68F50
-:10BF30000E8A7DF4C1AA5B681FF5E55F965E785CAA
-:10BF4000C867CA469F2B00E357F52D77E3386B7619
-:10BF5000C138A9973FCEE609A3B3ACF1864FDE8185
-:10BF6000EF1F8DC51BEEB903E30D4745BCE1FC7324
-:10BF7000CD5F467BEBA642FD27880747A17E12CB0B
-:10BF8000F308CF28AA0FE0B922EBF0E770C6E8214A
-:10BF9000FDFAE70B13F8F59D739584F6E93B85DC14
-:10BFA0009E86F3EB97F81EF3C6FC6A17789D9F53A5
-:10BFB0006A119FBFFD47AC09C769FF366B7A3681AE
-:10BFC0005EFFC742458EF73B3A0FFDF23C0CFF2166
-:10BFD000D1784E4FD558C4F73917CF83B18FA716F4
-:10BFE000B9E5788E227C2733069F5A641A6F07E0E2
-:10BFF000A01FE9A4FAD2288EC9EEA678A7E4A394DC
-:10C000003ADF7CCC53000393E13E93F2BC6F7E2178
-:10C01000E6D9FD605CE07136385D7F26F8EBBC90B8
-:10C02000B3B751CE409ECEA29C41791AE50C9E0F2B
-:10C03000A09C4179B23540CF7FDC1AA4F247AD3ADB
-:10C0400095275A2BA8FC416B98FA1D6BADA1F2F510
-:10C05000D6083D3F5AFEF55B289EF69442795583FB
-:10C06000C173D757ADF27567D42A5FEB7659E56B8C
-:10C07000CD4E6BBCBCB1DB1A2FAF37ACF1F2552DF6
-:10C08000D678F9CAE69996FE2B9AE65AEACB23B7F8
-:10C090005BFA2FAB596CA9EB455C5F5C125E617972
-:10C0A0006F7145A3A55FCA22164944FF8A22CE9F1D
-:10C0B000074305C30686D877DC2DB7FF04F59458EF
-:10C0C0005D8D30D4EBDD2D0BE8F9D6A4705D38C161
-:10C0D000F875457CBFEB2C5F1D9EC3D0FF7B8BD3D7
-:10C0E000ACFFAC9F16595464B273DD7E6E97BD3BB6
-:10C0F000FEBD17F1985854FECE4BD7E139D5CF028B
-:10C100000AF0950E6A9F1FB6EC22A3CD791DD4AB21
-:10C1100033C18E34ADBBF833FBDA47C3F399EB5F21
-:10C12000983B12CAFCBC485D11DA5115A7DAF1FD43
-:10C130003995792A8ACDD60C467AE9B9096EB27753
-:10C14000EC707FAA48B1C4B3AE749FEE6CB5C6E57F
-:10C1500073FC3CFE95E3E7F12EA853BCEBE9699133
-:10C160004F217CF09CE25E5D596B73703F192C8E01
-:10C17000F490A097F42B48B8769472788E8A78C39E
-:10C18000107E852F168D1A1CEE73220ED1F5254FC9
-:10C19000C2F8CB3911873827E3100F2D4E18873896
-:10C1A000374FF815A01DFD09E776D7F0725EE390D2
-:10C1B0007108B93ED88F1EA4FD27168710FABEF06D
-:10C1C000A3BF3E4DFF5FB88EA63C7D17F67B7F8AEE
-:10C1D000BE1BEB474DF150DF68533CB4FC154B3CA4
-:10C1E000F499FCC83E7C6F226E693064BBC1069234
-:10C1F000C6617C367C4F223EFE9722A967F7FD453B
-:10C20000F15A535CD5F1C1CDECB2E30297DD2FC8F2
-:10C21000F350EC7A4E0A620486E8C6AE70CE3E5900
-:10C22000183988EBEFC8785EE3F9568EF8FE8187FF
-:10C230009F7679F3250B3B15CF2B3CB78E81C4E05D
-:10C240003EB33DA399FC2AFD026FF6F28D22414FC9
-:10C25000E61B89F47DB230FC3AD28F3DD7AB511E3C
-:10C260009B78CE722FCF5E7DC21DFE09EEEF9D73CF
-:10C270009C1ACF1B64E4BF9894EB8BA27E2BF5B085
-:10C280005FE27E49F92803E3DDB0CE76FDC554CCEC
-:10C29000FF7E6B8F8A1930EC2B69CC8570877361B8
-:10C2A0007F8375CCF1476E1C6A5FC4041E4790F80B
-:10C2B0004271F8A91CC14B43C1E7F6FEAFED796F9F
-:10C2C00014EAE55FE9E1F1B0493DABBD0DA6F173BC
-:10C2D000A6F37DA73393C35FA72B512D1BE1B9F0C4
-:10C2E000FD19186FD11CE4EF786BC36F8E2F43FFDD
-:10C2F00063C8199840F577A9DEAF390A307EFD96FC
-:10C30000FFD7C7B1FFA42FAC194DB68EC0C7AA0D79
-:10C31000054F203EEE0B4494E9304F7FE8DDB471C9
-:10C32000A678DA2A858513E93163A673BADDA637C4
-:10C33000DF81FBE66DBA87615E737F9987F0FE95BA
-:10C34000598A86F6EE42E475680FEF51C98F0DF8F1
-:10C35000588FEDAF065218CE3B477F46C5FAFB53C8
-:10C360001476DD10E7F015E335F4EE2894C3B790AA
-:10C37000FF12C0FF4BB96F0A399AA882DCE723FE8F
-:10C380000FA59AFD95929FFEA9501F37BD08FD7F0E
-:10C3900091A630E9B98B2EC1871B093F0BBF1AA5A7
-:10C3A0001884E7B1E6EB5982FB0DAF09F9B03F2FD6
-:10C3B0009CCECFC95F0BB998D4F3DEABB7629C7942
-:10C3C000838BF2116E2A0C4F47786276D755DE3791
-:10C3D00064BE5A7F5021FB0DD4699AA71F245005D3
-:10C3E0007A2529C9014E4FEEA7F38AFD0FFAE9C35A
-:10C3F000A0DF2AD6DB87FE3EA6EA3B9DD07F73B145
-:10C400008BE8BD6CA52B0DE9128F9F052CF686BD20
-:10C410001C1071B3CE562FE56BF47738B99E0F7FA1
-:10C42000401387461EB767C6948775F8E713228FB7
-:10C43000F493C15B1FC67C9AE30E5E6F08DE7AC37D
-:10C44000468C7B8F6D3EBE04E3160F2881360DCBE4
-:10C450007DBB1A30CFA345095440BDAEEFF37E74C7
-:10C460008935747848C73FB56912E989EFFA990FA1
-:10C47000F5C46563B8DC34F6B3A8233B6EE79ECC05
-:10C48000E2F113B463E74DC76D97E3E39F5BFB08ED
-:10C490007E4F0B8F9B0C0FF0B86972BF1A884297C2
-:10C4A0008F6F7B87ECE0B0DFAD219E47301E578950
-:10C4B00064A606300E1AF4F3B84AB27EEFF125F006
-:10C4C000DEF07295E7B70D707BB809FEE2391261B4
-:10C4D0008136DC9F465458EDE4425B7C459E6F1EDE
-:10C4E000FB7315EC5178DE36DD7ACF6330FFBD2C5F
-:10C4F0009F033D02D7F7BC88E77E13F475A4D3B73A
-:10C50000415FC7F200E8EBF8FC7BA0AF63D907FA04
-:10C510003A9607415FC7F210E8EB58BE0CFA3A961C
-:10C5200087415FC7F7FE0FE8EB58BE0AFA3A3E7F35
-:10C530006E16DF473AB3DCD18D8067EF9F808B01A9
-:10C540002F9D2EF663E42FA3CCA3F17C7CDEAF2BD2
-:10C550006322EDF3FD4AE4138CE781688F633DEDC0
-:10C56000C21F7F85F54DD964873055FBE600F4EF97
-:10C57000F87C76600B54BBDDFCBC1F38CA7CA83746
-:10C580009C5EA24C45BDE9CC7CA55701FDA67FBEB3
-:10C5900042FAC44414BDFCF83E5AF29EB61FE76B43
-:10C5A0004F63821FF7F5E8C07FA71126E2D7B43AA0
-:10C5B000B48F677B643DB90EDBEB5B1461A7A6EF1C
-:10C5C00045FEED92FD8DEB7AB07F87AD7ECC21EB01
-:10C5D0004D7BB07E3C365FFD0A1CEF788E6C6FA8F9
-:10C5E000D5E1CC184892F3CD5C89FDFB15D93FAF5E
-:10C5F00007EDE43359B2FFDA15D87E2666473FB619
-:10C6000092DA47F1FE93BE3BE211B49BAFF678EDB0
-:10C6100011BE3FC33EA69BE33A2D25DCBF10F39F1E
-:10C62000EA8AC57F2AFDF68E94DAEB30EEE6D9C8A9
-:10C63000F3B406B20275785E0FE64735F9F9C98F93
-:10C640003ABB24767FC0EA2FD5159E47EF6311CB06
-:10C65000FD369127EFCE34F9ED84AC5F8EFF50C6E6
-:10C660004BA4FFB0461FDA7F5833CBEA3F947912D0
-:10C6700083F90FE57D04E93F0CAFB6FA071746AE24
-:10C68000CC7F58CBFA5C686F315D2179A9F5F5BE96
-:10C69000341AEDFAB31AF90F9976381ABB7FA0D184
-:10C6A000309A633ADE23E3F5D3772B7EB41FB6DCF2
-:10C6B000AD8CC6F2E4DDCAF5284767EF567C2857F3
-:10C6C000BF98C1EFB7149D0F1CD6705FF53B021CDD
-:10C6D0001DE12FE03E1C5E9DA16D41BADEAD0CC791
-:10C6E000FE2B3F93E1C6F303F44B21371F3C8C7CB8
-:10C6F000E54C512CF5C2B1924FF73C8C72317B84E2
-:10C70000E4C3C57BB05EE696EF7F710FCAC9F288BD
-:10C7100022FADFBB07E5F0F81CD97F782DF65F32EF
-:10C720004E8EB7770F8E3F3B45D61FA4F6EED878D6
-:10C730005FA3F97E882721D5B7EDD1C7C37C55E229
-:10C74000DC323E46E377D6CAF7EFE92983F1568813
-:10C75000738A191F2739273F33BD0F7A3AD4FF5DFB
-:10C76000EC030D337EBF02E5E68E58FBEF69BDB5E5
-:10C77000A2BE7AC6937B30DFECEF7E7D7FE5F9ECDD
-:10C78000F595AC7FDE758571B9B09F8BCB8BF9BE0B
-:10C79000126C7A068F2756DBBCCF89F2887E001197
-:10C7A0007FAA0E237F7B9D943717F687C9EF691FF9
-:10C7B000E7FD195CCFFECC0C6B3CADD3164F0B6381
-:10C7C0003C2D7BF071EA8AF938DD7312DBB34F4FF1
-:10C7D0009BD33A63545C3F4055D00D6529940E2895
-:10C7E000FF3425B26946115EE6E1FE16E9BF5E2020
-:10C7F000F288DB4ABF1C9E83F7928A5D01E1FEEE60
-:10C8000037C777D56DDCFFBF62CE05CA0B5BD3E9B6
-:10C81000D1F6631E4B87C85373A652FC41BDC1BD00
-:10C820008FF679113F8D60BE710ECE33F4BD0DFBD6
-:10C83000FD1943ACF7DDD01617EEDB35E56A9F5BDB
-:10C84000C48F79BE9835BE2CE3C56579E329AEDC8B
-:10C8500098E9A5BCE22ACC0F41D910F1EE3AD1BF3C
-:10C86000B1E58530E2BD7EA793A11E78A5F1E5FA7A
-:10C87000B091F539787F41791AD7E76CF1E69A865D
-:10C88000277517B41F055C8FC00E225E2EEF85C47E
-:10C89000EE1F883874443C5F1ADBFF2BD371FFF422
-:10C8A00074811D86EF8B38B38C4757D9CE81FAD06F
-:10C8B000DC74F2D70654B21FD54BDCB3CE29E1F9B4
-:10C8C00068321E7D7886351EBDD5C5FD7FDD3956A3
-:10C8D0007E2B29E1F6EC2471EE1E2C4DEE4B42FD31
-:10C8E0009A79C9CED882FE9A61DCDE40FF84DD6F82
-:10C8F000A3B6AC20FF22B62BC07F4AEECBBFC7FB4E
-:10C900006A582F81FE2ADE578175A8A90EBAAF2971
-:10C91000FD3BA886CCCB273FCF49E463B5A58EC6A7
-:10C9200091F7D307F3F3FC6C86D40F7A5DD86F854B
-:10C93000FFE51338DF5FECE7117696EC1FD6789EA3
-:10C94000CBF0199A8C5BBAF8FD3DE65A3485FC2190
-:10C95000EFA17CB2C9BD1AC221F7A345C5CFAEC0B5
-:10C96000FD88E9A3D819D3BD08FBBE20F78BD87C7E
-:10C970007EFE7EDDB7BEBBC2183978BC2227148B81
-:10C980002FA8419C7FA48C2FE82EACC7CF595850BC
-:10C99000D072CED636FD37386763FABD31B616DBB6
-:10C9A0003F6AF0035FCD0E52BE14F7B37DD4E07F33
-:10C9B000A5485F8A7C78ADE7F956517835CEB359F2
-:10C9C000D16B52793030A00C1D17BC0BFBDBE3821E
-:10C9D00097F257FCC33F31B47FE24B416B1CFFC35E
-:10C9E000E29FF867C029EE93204F4F923C85B83CF8
-:10C9F000FDBDEF7FB0DE57B85CF44693C75D7DFFA9
-:10CA0000C09385916388CF895A6A3D9EE3308F86B3
-:10CA1000F217F37B20DC418BDF634FD335F07BC013
-:10CA20003ACF125DCB395DFF0EE8F65F749EEB5C8A
-:10CA30009FF83BE4CBEB8B915EBD7C7D7F83F93F20
-:10CA400046F33FC5F9258E1FAE2799F053DBF4B7A7
-:10CA5000C14F29C1F74D0EDF47809ED5046F80C3BB
-:10CA60007B29FBFBCE193C7E02EFADA0F70A391FF4
-:10CA7000DC85FA35B7CBE762BE80B4CB33F2F45530
-:10CA8000D80FF4DC7A3E4F4CCF6D281E35A4DDBCA8
-:10CA9000B67868BB797DF147C86EDE2DF0168FCF72
-:10CAA00044E93E1C9CE41447AE137DB7B42CBEEDA4
-:10CAB0002680FB37807FAC7B703D4ED37AB254B278
-:10CAC0009FEDF7D48E883C08B92ED5593B0CF5085C
-:10CAD00089CF23E99A1BEF4335E84A272603CE3551
-:10CAE000DEA175BB750FE91F37FA7D9D187F5DAC20
-:10CAF000F3F5BB9B7C74EF45DE7393F74E1AFAC6D1
-:10CB0000BCEC86F7B680FD3206C65F586EBD876204
-:10CB1000D72F545BBDE5C7D9DB0F99FA3F566CCBD5
-:10CB20001F743E5541F94386427A1713F9840D620A
-:10CB30008CB6D23B92FD5C8FD3100F73773ED08FB3
-:10CB40007133B7E1A4EF30FDB655DB7E08442A69A6
-:10CB5000F3BBB4BEDFC0FAC8C8ADE4F1FA4611AF0A
-:10CB600067363F8527F9E72EF44F4B3C26DDCFF3A0
-:10CB70003CDCC153E574AFB1764D7F11EF4BFE073E
-:10CB80009543C6E47735AAC438553ACFAB5CEA770B
-:10CB900058F284EC7E0C95A9B6BCF881974620BF6C
-:10CBA000015EBF8CEC91CBFD10C94CA7EF7024B790
-:10CBB0002D1ED687DDCA5D96EFA12C0CDDCBCCF601
-:10CBC00072B28D2F3D367F839D2FEDF4F8818D1E3F
-:10CBD0008FAB5C2FED3CE6247F79E783ABBBD17F45
-:10CBE0006E3CE8207FC65999070240A23F7F198B0F
-:10CBF000E197F4E5CEE68C28FAE1255D96EDE4F9BF
-:10CC000021D4CBE477672C9399BFCFB14CF817EEC2
-:10CC100060BD74BF61251B70A11CAC4257BA13FDE7
-:10CC2000E21A958DCCD8C4087F91EE6C98EFF1E6AE
-:10CC30001101F46BF75DEFCA783B97DB1189F4D7EC
-:10CC4000785C56656F9BFCFCFFF06B5DAE5FCB695B
-:10CC5000D0F7FDFCEE287EDFEF527EAD97453C42DB
-:10CC6000FAB5CEEEE4DFD5E817F72AFA5DDAD89DFB
-:10CC7000A9D84FE3DFCBE85E761BC2FBDAE6577C30
-:10CC800003B44FB20DA387FE0EC4D4920476E1F72D
-:10CC900067309E17973D9085F999275DD6BC5B5903
-:10CCA000CE0FB9C5BDECC88C12935ECC7CB13CCD27
-:10CCB000E212F257F1FBD9D2CFB4B620528ACF6735
-:10CCC0005D60640F7A2A95A882F919A9CA4B8A1661
-:10CCD0009F9FD9F3E5FF1107E3DFB712F8E94FE2B1
-:10CCE00079B3FDD9ACE6D904F4C99EC5CFCFFEBC5B
-:10CCF000C4F493EDA097DC83F443BB299D33CBCFE1
-:10CD0000DD43FB133E5B9220CF58D2F7C9D9FA7DA1
-:10CD10009CEEBC9E941FF902D6DB23E19FD0F7EB7B
-:10CD2000B639B536C47F9F762488F2F945A70FE35C
-:10CD3000DDD73ABE377C46F665C5F77E81F81D45DE
-:10CD40007C2FF4C67FAA433D708BB4CB84DEB862DF
-:10CD5000B8A90E5B71C931DEFF1B25D3F71AEAE0D3
-:10CD60007AE6FA0377F4A01E29F54CA8AFC4BA7C82
-:10CD70009FB1DBC796815EDBD824E388B7EF453DE2
-:10CD8000373EDF92BDA8079F7559C7977AEA2B25D2
-:10CD9000E57B71BC706CFEF2BD08FF800D7EFADE93
-:10CDA00024D4DF28D1F7A2DE5BCF64BB4EF901713A
-:10CDB0007FE27AB25B8FBB65FB27285F607B361F03
-:10CDC000FFD503EB7BF03B691F3678AEF5F857DAF9
-:10CDD0007F307DFFA48BE7071AA09F615E4890F526
-:10CDE0003AB9F0E96E27F07F89AED07EF4EB109768
-:10CDF000D770AA43CCD3D2437C512AF11AA53C8FD9
-:10CE0000C1F8EECE03DF7818D71D87FB1B2B900EE1
-:10CE100031B88DF575E81792701FC5FE30DE8A7B3C
-:10CE2000EEF4239C2B627E8DB61EECD79921EB93FA
-:10CE3000F6627DB0795786B6F5E0BC2B62F8798052
-:10CE4000DE5F912CDFDF65CD4F317A565AE15A6DA6
-:10CE5000C1E7F70EF4F4205C615F74D368F2073227
-:10CE6000FAFEE71D4D6D94BF1D97A3AD592447FEF3
-:10CE700058BDC72A479F26B8AF365CB09FFA67E215
-:10CE8000F995CBEDC3ABBF6ED82771DDDB145AB774
-:10CE9000E4A35A9F89DFE19C6BD464FD9EBAA6C9C6
-:10CEA00057635E6EE7867FCEE8FC93F2C48C884DB4
-:10CEB0007E2E6FBCF6D41CCA9F00FB4A4F946F7D38
-:10CEC000D70C45FA31E7103E83D26E6652EFB86553
-:10CED000E62893DEA1C5F48E0AEA6FD33B3A451EDD
-:10CEE00055A7B86FA2438BDF94E7337E168FD3B676
-:10CEF0008B3CCDC28DE1B5663BFB89D91C9EC766D4
-:10CF0000733994DFAB3DD3A4501E58FBB611E9989A
-:10CF10003F7B2AD3B700CFB5FE6C4700AF2E9F14DE
-:10CF2000DFCBECFFBC27EB33F0FC44762AD9A927F2
-:10CF30003276A6E13D855301A738679E7B8BFC5D69
-:10CF4000717FA281E78AF417AE9ED94EFEBF3735B6
-:10CF50005E0FCC7EFE2D8AB7E5DAEF7186488F71C1
-:10CF6000DF22BED32BBEB729F5A5AA4D8F7E896CD3
-:10CF700060A1BFC8F3D37EAF13FFB8CCFA57879335
-:10CF8000EB5F7EDECFCF06DA3E30E9DDDE41BEF379
-:10CF90005A23EF11DAF429BB7ECCC4774DA57E9ECF
-:10CFA0003CB281FCFAC94DD67EA73A5EAC0CC2FAFF
-:10CFB000BA024ECAB3BA3DD7AA474B3DECB68E472C
-:10CFC000C90E05BDD0D22EF36B6F67BD1D74FF5B1C
-:10CFD0003B7CC8393A6E77B4FBAA484F69C8851ABA
-:10CFE000ACE7F8FF284B2B42FD609B13BFF0CA73E0
-:10CFF000EB4DEB807E2EC748DAA7038A62CE076A24
-:10D000007B04E5229E0FC4EB713FFC7D8FE07E1018
-:10D01000F317B37B5659FC9BC632EA1FF38719619D
-:10D020006A3FA30AFF97B1EA11DCCFE2FEB11FF617
-:10D0300058FC6346E523C84F32BECA8CFB29AF6F4C
-:10D04000A94FC2F3A31EACB7EBFC3CF9E6773C2733
-:10D05000F17B4057DA1FE4F379944316E6FB9DBD5C
-:10D06000BDE458B43D5DE875F83D0ABB9C27857862
-:10D070007E5DB99ED7314AE37E2B0FD0475FE95CD6
-:10D0800089FC1ACF5329A6EFA2350E9257322FC42E
-:10D09000E5F7F0CC548B3D6ECF4F691471E8C1C6F3
-:10D0A000A92FE571F67EC557CDCF6527C373B9ECBF
-:10D0B0008171A9783D55F62B2DE5FBC19FA6E8C7E8
-:10D0C00071FD763FDA59F4A3A1AC0A7FC722C13BB8
-:10D0D000EA4EEB774BCE64F0EF962CDA26BE935EE9
-:10D0E000F197F9CDCECFB4DEAB1F2CFFA1B894EFF2
-:10D0F0006379A55727FFE189645D477C9D83BEE87E
-:10D1000017BC281F42E439C83C08772887E76D30F0
-:10D110009E0FD16EF0EFF15DF57B2CD22E290CA77E
-:10D1200084F05CA8E1E788E4B3BE991AE7BFF30195
-:10D13000E23FC977D03F23847C5DCDFB979CE7DF3E
-:10D14000B790FA45D281933D6DE3E91CBA2E643E57
-:10D15000875263F71EC784129C4347E7EA37F0E71C
-:10D1600086C86788DC182A4AF87E762881FD3C79D3
-:10D170006A783C3D8FDDD7D42784FE91FF00D3260B
-:10D18000CE3B691C24EF44EA85F5DFFBE94A03FA4C
-:10D190007D30475F1032D9AD31FD7280EB3B31BD40
-:10D1A000D2984AFBE235D01B57854C7935D760FCC5
-:10D1B000BB88EF265BF528B4FFCDCF3F6C761CC053
-:10D1C000B791F022E2267FC6FB5B42A678CD5F01D5
-:10D1D000DE5D2193FEFF21C4E75384CF0F2F7C7DBA
-:10D1E000045F25A7F7CC99313E7D31311F5C36FFB6
-:10D1F000FFDF90296E6E1AF7083DAF1C3A2E07FD2F
-:10D20000DEB0F68BBDFF03F3B843BCFFEF047FAC89
-:10D210005FECFD93F45CF0E75590F3F366FA5E8300
-:10D220007DE43D5AEF783EFEE992D83A7E6B7EFE71
-:10D230000F7FD925F93C6B16E2AB99F3D365E8D99A
-:10D24000E366F1FC9608F7D31A52AF99289E0FE0D7
-:10D25000BDD105C8D7A3E85EDE4D38BECEB89D1B54
-:10D26000B34B8CDD7BAD76090C34D972DEEF35DB48
-:10D270001DFAAC7D7B115EE75CDEBFE8BBE9AB70FD
-:10D28000FDF63AE825336659F3328338FFA5C6C563
-:10D29000F83FBD678BFF9BDAE7CCB2E42F703D16F9
-:10D2A0008E70AF0768FCC35AE7C806A857CEE27A6B
-:10D2B0002CE82109EF6F57CE8AF9132A693E918F26
-:10D2C000712CECA47B80317D8579C9AE8AE953C687
-:10D2D000D7C84F14D7A7FE85F8A954D077D5777B48
-:10D2E000EB049CCBF8FAC53A2EDD7F25F5F7F3FE6B
-:10D2F00009DAEBA93D93C3C9520F9F755AE2156C29
-:10D30000BC6374FC7740CA5C4B668D047DE56007A6
-:10D310008F47D5770BFA1ADFDA6BB513B9FC2D17E7
-:10D32000FCDEFADDBE3AE4FFE5EF49789D7CFD3195
-:10D330007F5F1FADFF4DE19748FB5E9F84EFB30415
-:10D340009FC6E1BB06E3B711DD19C74F0D335CA3E0
-:10D3500087C8B3D82CE80FEF75D37B5E0E574D44CA
-:10D3600071F1B8CB2917F279DD3196D0DFB473961D
-:10D370005BBEBF93DE4F15F66C20F1BDDD87E2F199
-:10D380009387A8BF8FCFE780F31FEBA1C8D1B94027
-:10D390001EFCDE1CD935E17255C7EF2C84831716AD
-:10D3A00031D377E5641CBCECFEF1BD680F269727EE
-:10D3B00071BBD16BFD7D0ACFDCFB721FD4485AE9EB
-:10D3C0003BB54B041354316B5C34419CCBE27791F9
-:10D3D000FE9125B1B85426D9B9EEADFCF7A158B5E8
-:10D3E000358E99DCC2C8CFB5C050A21A8CEFD1AD32
-:10D3F000FE96C8066D3BFABB54D515D0B58BE39AA3
-:10D40000F6DFB998ED657A7A3EE5A37C6FD6A87809
-:10D410001ECAE9EE71A92887763BFAF4607674B7E4
-:10D42000D58EEE9776B47E75ECE8A3B3AC76F4DED9
-:10D4300082F01BC4EFAA4EFBDBC1D29245685FBCF1
-:10D440002BF228061E54D3110FC6367E6FE1948846
-:10D45000F3CB78FF40314BC5DF3B1868F3103E0734
-:10D46000D6644453E0BD74635D25FECE81B4A7113C
-:10D47000F3E80793DF27B6DBDDC941A0E7341233B9
-:10D48000B2B7077C3EBACFBCB0437C4742E40B48FE
-:10D490007B5BDE7B6F2CE7F7A7D17367FE7D8B8507
-:10D4A000C21E977679DFBF31C59C07B08805289FDB
-:10D4B000A09A85A95C2ABE9F58E3639B10A8F7A792
-:10D4C000447E47FCBF87F309DBAED2EF570D6C7B80
-:10D4D000807E1F6AB0FB0C6AA9BCCF60509CF61A14
-:10D4E000D8FB49A5A6FDE332F69B61D45FE572DC6B
-:10D4F00086F77C47C5BF1FD12FFCC2DB33B83F6521
-:10D500007C29F737D94BF97D882B3D3FE0FCBCB136
-:10D51000D46AD76BA597777E4EA4F7C4F7294663E4
-:10D520003C88EF4B379572BD404B27BF0A6CD14307
-:10D53000E703044A8788EBB24BE713044B13E41369
-:10D54000FC42E8236B0B22B370FC591718F1AD3D78
-:10D55000EE2FFB1D473F5582FDB659F8DBCA8045CB
-:10D560001DF917DFDBFF61AB7E1275BCE3AD15540F
-:10D570009E508D34CCDF3A22EEEDC30894CF24F3D5
-:10D58000A2E4B835B56527CF9AF6AB85F31EA33C68
-:10D59000B3F6DCFD871580F394C8F7EA4FF36D47C7
-:10D5A000BFB371947F476A69F5AD27CF9AF60F3BF9
-:10D5B000BC98176580A8DF59CABF5FF76299A76F4B
-:10D5C00036C8E1EA6D5C0E576F3BE5427F665D4B06
-:10D5D0003D8B4CA1BC2915E97B6C26FFCEC2C2A0B5
-:10D5E000931926B832F2F486528A7B845713BDE32E
-:10D5F00079816BB05EE6D2D331AF5DFA2965DCA0EC
-:10D60000B4F467A43FF767309A3FEC67518CBFCF03
-:10D61000D5B3DD03187FF1FBC8AF5A57AAF1DFABD2
-:10D62000EBD847F02487DE2178CA54C0F7F08BF19D
-:10D630002DE5A253E0DBB46EC2F760F2BB709E9A98
-:10D6400086F83D82F4827E9BC43EF09A7A21D5977B
-:10D6500080EEB1F78265167C7BFC1516BAB5EBE35C
-:10D66000D2713D92CEF5A2ED7487F3FB48C7F73037
-:10D67000AF8DE898381FE228D26B12B497727FB44E
-:10D68000A4579DC1E9556794713C056F758FA178CA
-:10D6900080D28BF7251BCBEB19DA0B6E3D83BEFFD7
-:10D6A0002FE9B7A81CE8678217E4F1E15293DEF98D
-:10D6B00067F8D91F2D35E9C1D73A0E00F33D43F382
-:10D6C000D9F372FF4A71888BBFDBC3F7DD3705BF23
-:10D6D000D84BB9EF0E9ADF6C54AE6AFA33E0907211
-:10D6E0008372DBA660FEA4E2423E0BA3FC4E417DAA
-:10D6F000EE3F36615CB4C1CF7A712F7C08E508F04B
-:10D70000E6AEC870A3FCD47767135FA0FD4FF81492
-:10D71000FBF44BA54C9E5327E97913E78BBF75FCAF
-:10D7200007E0B940F0D48AFB051FB2F854564558BB
-:10D730009D8DFE597D1F9D2F7D33E5F79A5816F775
-:10D74000935F593CD4A3F3FC3119174D1007D594BE
-:10D750003F230E6A8FAF0E16174D1007B5E8EB8307
-:10D76000C541992D5E6A8F83DED63182E2D0B765DE
-:10D770003A28FF51EAFD32FEF96AC7D7E97B47AF85
-:10D780004E565846F6C571D26DC23FC650AB33AD4A
-:10D79000FF4416FFDEF596315EFA8E28FE719AF28E
-:10D7A000F1E07CF07A60DE8E794ED24BABB2F7DBE3
-:10D7B000F1EA1676C965E155C6D9DD1D3CCEEEF11C
-:10D7C00033FA3D4D49C7F8F7749FA7DF8B642ACF22
-:10D7D000D3ABCFF5515EAB9D0E9E8EB67BE9779CA9
-:10D7E0007CD3D75129E8EFF15F9C3FA84AF812E4B7
-:10D7F0000FFED9F4BC041DDDCE0D5E14B98BE8A973
-:10D800001D4CC5EF8ADF1670FA342D4E4749D78B71
-:10D81000E9E7A3FD45C6B96F2A0CDF857223BFD3A4
-:10D8200024E97B228BE3F7CC4D2C2ABF4F66A62739
-:10D83000E05FA77B77B96C1FE11FF330A75ECC17C1
-:10D840009E5C837EC7D39D5CE927B992F8D50E1004
-:10D850005DDA9B7D0B507F3A5AEEA2BC9504FC40EA
-:10D86000BF5B7B297EB888EEDBF8EF845E29FDEE96
-:10D87000287E5CCF4EC01FD790AE15C14474C57CC6
-:10D8800086BF80AE278AF4C791AE929E3715EA5FB5
-:10D89000995D64965F83DB312CF1F76D9E16792DCF
-:10D8A00030CEBFE27BBD686391FF50EFC5FAE21B4B
-:10D8B0005973A2EF823D5BC6CFDD5AD6FBD268B466
-:10D8C000FBCE3291B71938ACA19FA6655CC2BCCD26
-:10D8D000E3F86121E8BFD0CFF639C4FEEA30E16950
-:10D8E00040E46FBE89F99B60E7BE3C3B9BD6B10527
-:10D8F000F338E1F92991E7598B63E33CA0CF627CCF
-:10D900009EA91186F7D3FB63DF6769A373379E8FE8
-:10D91000F1EB47ACDF67E1F58599B23D356A898364
-:10D92000327F04EDB6B8FD35356A39EF5830628D77
-:10D9300083F27C1D79BE6DD4E7440C731C9455D0E2
-:10D94000F8276B65FF1DD1B2C9E638E8E2A86E8EF4
-:10D95000731AF3A3E638279CAF54977EE8C7FBEE13
-:10D960008FA05E3F796AE43CD25FDE9B870348C7A5
-:10D97000DF9D73FB7DFBD10E07FB00AFE40FAA57C1
-:10D980007FD8CBFF0F02C2B069008000000000000A
-:10D990001F8B080000000000000BE53C0D7454D5FF
-:10D9A00099F7CD7BF393644226017480A02F01DCAC
-:10D9B0005843187E020109BCF9C94F157480A0B103
-:10D9C000207D842CA55D5A83959676EDE6416248CC
-:10D9D0008240E8D2EDCFE9CF88D03DAEEE69E87164
-:10D9E0002991D20E6229964A634B8EB14B75B0597C
-:10D9F000165BDBA295DAEEF194FDBEEFDE3BF3663B
-:10DA0000323128B4C7EE8EC77373DFBDF7BBDFF7C3
-:10DA1000DDEFFFDDC79DC58CB105F03FF3C60C8D72
-:10DA2000B18110FC3911FB7ED380B1955364BF22C4
-:10DA3000669433B6384FF6AB4C6321639D2EB99E86
-:10DA4000590CE6BFC09CD4DF66844C6B2A63C16569
-:10DA5000AA985F4FF05F5A2DE7EF8E0501DE2A8707
-:10DA6000E85B2B628697B10F31D95F4AFDD5C97E3D
-:10DA700094FAF732BEFF81F84ED382F58FCD894EEE
-:10DA800034C6C3B348AF1E9DFEB787FF3945E233A6
-:10DA9000C5C4F1F73BBEC0EF7AA312C1737EFF0D80
-:10DAA000E0BB86E4E330C7F77D88DFFDC4CF2738CD
-:10DAB0007EEF037CDA099F5EC027FF2FBFDF0F2BAD
-:10DAC0008D3DB8DF5F808EAFD1B997733AAE60FEFF
-:10DAD000A34477809F43E6F8C4A08F311C9FC3E125
-:10DAE000BDE8147264359B28F709D9C77383FE8299
-:10DAF0003372BFCD7A50B3E3BF99F46455119FFFE1
-:10DB0000EBF8A74DAB38D5879F81E72ED7FF06C727
-:10DB1000D3D67F8AD67767ECE712E3CAB1AD846FBC
-:10DB20008A5E8BE6F767CC6F14F4151CEB8C5936C4
-:10DB30007E306B3BF1276997AC9D6497065CB2BF62
-:10DB400083F4665709873FE1D8CE18E20FFC3B45C6
-:10DB5000FC9ECAF9F7FF9D1FBF3584BC94717E48B7
-:10DB6000397C6C8EF13B94B3F71BBE707E6A707C7F
-:10DB70004AFEFF0AFB15D27E429FDEEDFAA43E0A62
-:10DB8000BFCF9624F93B2908CF2784741AAFDA70E7
-:10DB9000307C3DFCB9BAE511D544B830878D632C93
-:10DBA0009A60B16DB0E7AD2CA632F061D180C97C2E
-:10DBB000E536BD665F243C5C5E87E87F83ECDFAAC8
-:10DBC00045E25CD8600CE38B14DEDEB5784E49BCD0
-:10DBD000D9D7D2F05E78CCFB88A03B10B4E9C9B5A8
-:10DBE00086EF0F015F6CF150B22FF8B3EA135F9E1E
-:10DBF0008C7C58552AE17E3386705E2C94700FD24F
-:10DC0000BEAB92FB7C8FF773E5FC1FD1FC145E0367
-:10DC1000661A5ED6CF28EE92783D766C80CECBE544
-:10DC20008B3D74DD1C689B958005E7F1A10D5B556C
-:10DC3000D36E1758AF1E04FF760F4BF649AE5276DF
-:10DC4000A097F6BDD6786D0A0AFE083D4DE29960B0
-:10DC5000018BD9F13BCCCFE71AEF6FB30BF7A3DC05
-:10DC60005E7BBEC79DD7DBF82EF560B52FA9DF061A
-:10DC7000F300DF7509E707E606EFD5EF0B72BED3B9
-:10DC80006E4FAE9E8EFE1AA2E3357E2E29FBF31355
-:10DC900033DDFE5C317E8F046DFEFCDDAEFFB760D0
-:10DCA000BA9ED9ECCFE348779BD7E1423E9B7E6694
-:10DCB000C400DE65FC2D4EB513420AD9A7A47E56DA
-:10DCC000F1F52B76B396DE2CF3AF0F39685EDB539C
-:10DCD0006C432FC00DBA2E36476DF3E2413E7E34C1
-:10DCE000A8500BF41D25FE6FE1F89D0AEAB45F9081
-:10DCF00069CC009D6A5831B918F16BFB398707E987
-:10DD0000125B9E9F827741C093FB1C5B96DF18F3EA
-:10DD1000A6C69F15FB9C0A723AD0FF133F1FE474FE
-:10DD2000A8051BFD085FCD5384FEFC9AF8DAE114C8
-:10DD30007DEB0DF26B03493BF43B92F7956E29970F
-:10DD40006F91FECB78FD8DE0FFC4AC85883F638E7C
-:10DD500059F675BF253B38DABA84F417EDE2BCAC4E
-:10DD6000E4799D43BC475BAF869516E29387C51562
-:10DD7000F01F2EBF6F5F3790525E61BC8A7C3E31D0
-:10DD8000D3F815B6A3C1013E5DA47379203D1FB140
-:10DD90008DBF194CCB072E6E8C221CD8D90DE7F6FF
-:10DDA000C26A755C13F0EDCF783E95941FD4DBCF3B
-:10DDB00045B67F4E9DCB9F8369F17C38BF12F488B6
-:10DDC0004D7004A6E9C3D779438A9433714EDA23A0
-:10DDD00048474752DF787F57211FCF79DAB956E895
-:10DDE000535E08F77952F097F9C6E17EACFC645CAB
-:10DDF0009D0BFE95257F8603FA6BF12FD87F207C43
-:10DE0000CE8972B0A65DB9323DE914F01F4E9EDF97
-:10DE100084D078826BB2B9C27FC06FE0235B096E99
-:10DE20006333C0CDA22F53429C7F5342493E4D21C4
-:10DE3000FC0D0ED731273A0DE1C254E69E9582BF04
-:10DE400046E01D74468F5E0F72D061293ADA557331
-:10DE5000CBDACE12E4ABE60C4C83E626E414ACEB52
-:10DE6000F0977AD1CF3D27F643782E3847F425FE38
-:10DE7000229AC73468E7D66F3A0EE0D8DBD3CD4A92
-:10DE8000C4A32ABA278C642D683C781CDB3BC04CA9
-:10DE9000639CB275D157A221D8A77FBE3380A2065A
-:10DEA000D159FF54C0AB41E0A51975AFB2319045CF
-:10DEB000B958203E07FDBA37B00D9E37347F64094C
-:10DEC000AB803951E750C283C498EC7229C2D58621
-:10DED00012659C6797C1C62DDBE24CF511371CF724
-:10DEE000A4C657DCC8EDD3AA10F0D32677DF17F409
-:10DEF0007D5FF07337E0D05F4E00F219EA0DDBE092
-:10DF000040FE991E8E67BFB5E2B69B81E04B652C43
-:10DF100080A36EA44F4DD19798AC05DC3A898B77DE
-:10DF2000E975B0AF38D7D3AD60EBFE0EC05A9C4E4A
-:10DF30004D5D5D10B7C9F1E931260B60DC56663DD9
-:10DF4000C4404EC2E61E6702F0B8B1F9F50D18F7ED
-:10DF5000AD31DD7A1DA078CF065F0DC6B52B4CC163
-:10DF60009725CE57906E0FFC877C71C55FFD810BA6
-:10DF7000F9BC50611300FE9D113E2EF9E266DA2BCA
-:10DF800076BE6819FD2D674B763D639B7F5F287FCA
-:10DF9000DCF95BE08FD96CF665A093A9DEA588CF8C
-:10DFA000A576C5A796D03407033A5D823F07DA37D6
-:10DFB0003D877ABAC6AF051CC887258CF8D728F6E6
-:10DFC00078AB55DFF50CC4AAE12D7B7A4A00CE3D33
-:10DFD000675486FCEA587D0021E1CF83F034211795
-:10DFE0008EBCAFF66B304FFBACCA703FC947E0B791
-:10DFF0006F2E3C3F3700EB61EA3D55C027D8F70E46
-:10E00000C3ADEB302F77E1EBEDC8A75CD6121F0B49
-:10E01000FDBBFC0E16F7A4E802BA2DC117C7658533
-:10E02000F6D235B9AF236D9CF892FB99306368BB8B
-:10E030002DA37F2ACC5B26E5B61DCE13CE6199C1F8
-:10E04000CF439E2B8B707995E7929B21AFEE2A6789
-:10E050004A3EB3C86BE639C432CEE180C6F52471BE
-:10E0600046A5B822B1571B53057D6BAF83F418F258
-:10E07000B4C34A01FC11579806FCBF5BE04B3FE07C
-:10E08000DB8196C2587749EA3CEE2E3BF127A58208
-:10E09000F159D7A5EC11C32416FA7789DEDD5FB2FA
-:10E0A0008A507E3FC47A9DA8D7F762C60CF87C9848
-:10E0B000F95CD86F62016AE1BC5DC8AF037B9FCE9B
-:10E0C000473B129FE82C3C5F46AAC2EC7632B34530
-:10E0D0004E9C9774C3E4B8B49F1ED34F76D90B2DD2
-:10E0E000D9698361BFB026E231B3F891F86CF38748
-:10E0F0006807655FF3B530C4E3EBB3A3CF72BBCB66
-:10E10000D74FAD307E84FD83B38C53D87E13E33D6F
-:10E11000F00F17430F525EF2F674E334DAB54C3B5E
-:10E12000760EED989E9287E519F220EDD820DA312F
-:10E13000185A8EFA0A7C63F55767C7CE4939F8003A
-:10E14000FB00F207E8F925D97F0DE801BEBC84E7A2
-:10E150003E8361F52DCE8A884CDD07F829023F7C8D
-:10E16000AE807D57B6FCF04FCA18DE5F00F3147125
-:10E17000AE9846D6A0DFF87AC0E39982F6C21C4476
-:10E18000BA33F9028ED9497999FFC420CA8D23EF99
-:10E19000BB93CD2C7E3079AE1B9DAF25E9423D82ED
-:10E1A000481EE95098E9B88CF4F8008909EF241763
-:10E1B00016C941C75285E8EB28618D68CFDB7168CD
-:10E1C0003E63DB972ABDF8FCF170118F97A6F2B879
-:10E1D000707B618B3F00F3B63B613EDAF33293AD67
-:10E1E000989E82FB7858A5F937CF31F2D07141DC87
-:10E1F00047F1928C57E53C5F98C79563C33CCE28A6
-:10E20000AF881685719F7126F11DE2A8B1D4F7C6BB
-:10E21000638EEB445D84FF74872D8E1898D4C2D032
-:10E22000BFBB0DEEDF33E9BC219CF4EB3710BCBD66
-:10E23000D2AF1B37227E8BC7FA1AD0CEB900EF7D42
-:10E2400025297F7D68E9E754D896DD122E21FCAAA6
-:10E250009AF7B45D07E71D0C4EF1A27B8F57B7F814
-:10E26000D1EF6D9FC0F996B9EF9630F783736E10BA
-:10E27000F304BFA4DFF740F8ED847D30CD77601C58
-:10E2800050CCE3807BC3A5B44EC60330DF72C1BC63
-:10E29000E04DA0A718374FE37032F7BB57F033E5D6
-:10E2A0006F030568AF196B217F1115FEE48556E3F6
-:10E2B000A52110CA81D67A6AC1FEF747C0C00D6A8F
-:10E2C000567E200B1D77D63CE041386DC54D1EF4BF
-:10E2D0009F1D4698E036AE0EBE3464B3B7DB8BD9D3
-:10E2E00064C4EFAE860FBE3464D3B7FE7C8E2FFAC3
-:10E2F00019CB9D82BB12E504F03D1E74C717034382
-:10E30000DD7E16739750EBD4314F0CEB341E35D6AF
-:10E310003213F3F1AA731AD5BF0A5972FE5638DACE
-:10E32000703123BF1EF5B7305CE7863ECE8F2E7C62
-:10E330009DE6DF59A532CB8627D89F35145065C49A
-:10E340004BBB51C0006EC77C25B60DF068F0AF27FF
-:10E35000FFB375512E3D877D09BF3BA63593DF92F4
-:10E36000F15547241220FF7495F1547C76F47EC455
-:10E37000CBE54FDAD507485E5376757398DBD54FFA
-:10E38000E173693FF61D7F81ECC77685CBE176E0CE
-:10E39000F7B7B3C8C756A107DB0BB3CBCF9785BC84
-:10E3A000BE3D3DDA86F00DF069FE59EF3DDEEC90A2
-:10E3B000F1A6E0E3D5F207F8F12F619B5D067E7CC4
-:10E3C000313C7E381FE0D78EF64295D6E2094543B0
-:10E3D000F9CF11DD47981943381ED64293546F94F4
-:10E3E000A1BF1B0E27CE70DD2A41DFBBB5C7DF8280
-:10E3F000F086DB35E38930E5853AB7A3C22E33D604
-:10E4000023FCEE7BB3DB671C604FB1DE8D8F6CF3BA
-:10E410008F8A73EEAB348F229D37E9DEB5782E5D9F
-:10E420008AE1F74EC1BAA7D9887ACACA668DB2CF37
-:10E43000568233506A6E88929D5F3ECAFC6D625F61
-:10E4400041675911F911D8F74BB96AAA3F1A5D878C
-:10E45000C2C64F11EF3633FA0BD4BBED650EDD5259
-:10E46000A8253DECAECA8929D0CF9965BE887C0528
-:10E4700011319C00BABBEC0D8A8BDC4B148AD3DCC7
-:10E480001EC8E0B2C8F979E16F20D6A07176D6F047
-:10E49000DBEB1D8511477ADE0B2261D8EB171147A4
-:10E4A00013D6E5A53FC3BAC9B7B3C8C545A14FAA9E
-:10E4B0007B539ABFCC9CF746D845F39488A84B0869
-:10E4C000FFB7D2CDF32BF663C0CFE65FFB2A437FC5
-:10E4D000203DB098A5D8FCA2F48334627BEEC6BA86
-:10E4E00013D279261D8EA4B328C2D2F605797544BD
-:10E4F000781D438D54A6C657AA8CD73DFAD3F9058B
-:10E50000F8782264A7D8D008F8ECCF8ACF603A3EDA
-:10E5100045117E2E7D954611C203FF3C16DBCE10C1
-:10E52000C85F16FE7E6B46E87AC45363566769C9B6
-:10E530003BC6AD37201CD9B7C5AD7A24DDBE9644A5
-:10E54000B87D2D8D907DCDBE6F85E0DBD5DA87F768
-:10E55000AAF73BF0CF2C7AD49D7832AF02F070BB93
-:10E56000AD4F92BE96CF1A45DFB87E7FF886FE4942
-:10E5700048E751219F68DB31DE30741E8F7C22C258
-:10E58000E53878538CE63D3542FC919C078CC1BA46
-:10E59000DC4871C8FCF71887742F1CC8A338E4CD79
-:10E5A0007D79E8EF9F1A0A658D438E16F74CCA16DF
-:10E5B00087F48D1087AC8FF078F5F87FB928AEA876
-:10E5C000BEC0FD7CF5851E15E3898D119DF83E7F4B
-:10E5D000A85F35414EAA310E01387D220EC1F914D3
-:10E5E00087BCD9A3225EF32FF4D3BA6AE8631C3246
-:10E5F0007F843804B05051EE0E5777FF0CCF2D9327
-:10E60000DE5315E666BBDC5625FAE93D895CD75D2D
-:10E61000B62DCFA4734E979BF86C8E6F6A1D97F73B
-:10E62000CC7923C9578DEA2DC3FA4017CB0D201F93
-:10E63000DECA1953C10A785E837171174E05BABBE1
-:10E64000CEE6C52CCCAB3D7CFCD3B963F6612BED9B
-:10E650008F47E8C55B3937C4441E6414C0FA4FAB1A
-:10E66000467C31F8A1AEA99FF7717A36911E6D16DE
-:10E67000BC09EDD1289FBE55C48332FE7A6EA51227
-:10E680007353D2652C590AF3E709F8AE393C3FAC15
-:10E6900055BD346F4719A379B75A17A97E313FE1A9
-:10E6A000D275E8CF4BACE7F9A2FADD937918EFDF2A
-:10E6B000A231159EAF6C8FB6917C9E75513DC38083
-:10E6C000FF503F2BCFF412DFF2865C69758E5CB091
-:10E6D00064715BDCE2CAE833757541363B24DBCC00
-:10E6E0003AC4C188C83F2BD88CCBC0974BECC14EE5
-:10E6F000A4CD3D2D74FC51367CBDAC2F6C9C617C4F
-:10E7000007E563AA33F1EFDF017EF5BDE6A2F73A34
-:10E710007D7BF7DE5E81758B1E8DEABA329F01CA62
-:10E720008A96613E8B3CA0BAF4E92694CB23F9B2D9
-:10E730000F060DF03E82092BF9BD8F3619B6FEA9E2
-:10E74000C843AFA0DF3B325ECE7F95AF977D2BD124
-:10E7500084F7358E4CE0FD4B11F5518BCE37A1512E
-:10E760001EBDE597DE6CF6F1744DBABCDE51B5897D
-:10E77000CBEB28EBC0AEBF18C9B22E67A9B9633A7C
-:10E78000F0E3C89083EA389067C5313ED838C37C3F
-:10E7900019F9B57D90F3F5C86BF7FBF09CDC6313BA
-:10E7A0000F64B3F3BF11FE285E1DA3BCAB7BA6C8EC
-:10E7B00077D990867E6BF7A2A74E55C03EA7E74F4C
-:10E7C0009BA50209C00B0FC6CB72BDBB86E77129A2
-:10E7D000FC9E579BD0FEBCF64A43367DAF8C98BF5B
-:10E7E0008FA4CDE7EF45DB7A34E27FD189BA7D781B
-:10E7F000EF275EDDD3AFC1F9F6FDC6C1304FE99B0F
-:10E80000CEE3FE11F10A005E455784D7DE7959E464
-:10E810000DF072D58C1F8ED74F6A187FEF53617839
-:10E820006A2A87E3C9441D7381B0F739AF7E9EEA37
-:10E830008E7D0907154F2E0DED5351F464FDBB7B02
-:10E84000B0142320B678C9391545CA7C504DD3BBC6
-:10E850007983B969FD7B5BC6A6F5576D9894D24361
-:10E86000F87F79644A5ADFEDFF405A3FC866A7F542
-:10E870001B96DC9A06AFC6174EEBD7F96F4F9BFF7E
-:10E88000417D455AFFF6B25569F39706D6A58D57D7
-:10E89000FBF63C84E5A368F94C6D2C23799C897CBC
-:10E8A000CD3B63903C6E1FBCDF877211AF8E521E52
-:10E8B0003D90DF5F8CF5EBE79CD9EB0B0FD6A8D230
-:10E8C0007F17A3BF3718CFD7E4FC606922AD2EBFF6
-:10E8D000AE86FBE735354AD63A41A63F967E58FAD2
-:10E8E000E5CCFD33FD6EA6BFBDF3E67D1E5EEFE712
-:10E8F0007E7FA59083B6B29F7A13485703AF2374E7
-:10E900001703BD5EBA8F41FA757CE5DD93F1BD5A00
-:10E910006E9939D65D92F2D7E1B218FB258CE7FAF1
-:10E92000626CCA741C8FB175D3A92EAD85CBF9F377
-:10E930009BC4F3F5D8829FAEB5F12DD3FF063D33CE
-:10E940007F50C052F14AC31F8D4801E0775BF3410D
-:10E950006D1CB461EF31CD6E874E57FF6ADC087EC7
-:10E96000FA633519FA84EBFA8696BFA31F78B99536
-:10E97000D7DD0FB57A581CE83BDBEAA3F6E7AD7E9E
-:10E980007AFE7CAB4E6D476B19B5F1D6008DFFACAE
-:10E99000B58ADA675A0D6A4FB4D6537BB2354AF35B
-:10E9A0007ED4DA48ED8F5B4D7ABE4BE8E9FB051F5C
-:10E9B000A34CD615A2C71D0AF1B501AFEA2EB86067
-:10E9C000A8763B0F7CFD4236BEBE577F12AFEE9D50
-:10E9D000847206FE2AAB3EF5D6C8B83E79DE84972F
-:10E9E0008C87317F413991753AC0EF31C4CF8DF5B5
-:10E9F000B9A2ABC7EF88A8DF1C29648DDF1670961B
-:10EA0000E5A33DFF4A3444F67CFC4CB2E77EA6A564
-:10EA1000DBF39261F67C2DE91D3B897552AC2FD258
-:10EA20007B8A8C3A4841AD4EEB641D64D11F791D41
-:10EA30006434FA81EE9368B7A4DDBE52BA879DC7ED
-:10EA40006CE327C83FE99F87F90F7323F98F2AA149
-:10EA5000B34C7B93E2C43C41CFEE579617A07D7137
-:10EA600023823C4F3758159E3393F701F66D281ECD
-:10EA70000EF7E5EA5EF2E73B9271CEEB14C70CF7B6
-:10EA80005FE97CC058C8EEDF810FAFA6FB45CE879B
-:10EA90001AF5BB896DE09F8F2418AF93CDE1EFEBA2
-:10EAA000A41F3C7281D7312E694A8CC1D185584B45
-:10EAB000CF3C680F7F8E8D8BC2395B931D810330F5
-:10EAC00035EFE93EDD03F38209736C0E8C57C57395
-:10EAD000685D68C9CC18F61BA2AF937D0A69E97E10
-:10EAE0001223D4A4DFA1225851467F626ABE8AE76E
-:10EAF0005B9AEA03DCF5B34DAD16CE65F9C516A6F3
-:10EB0000978B7AAA37AB7FDFA8D8EA6C1A0B7422EE
-:10EB10001DDA6776F0F77A19F226F924EB6D320FD9
-:10EB20007F8419BEDA2CF143BB78EF92F9BEE50F72
-:10EB3000D34D7F2DF05DF19DA0F72D6C03E3F723FE
-:10EB40001C909F20FFC6B862074A86CBDDC1591FC3
-:10EB50009C5C4BFA6D29D7266FEF51286F177913FC
-:10EB6000D3EF73D8F318993765E6470F0B3BBB0B10
-:10EB7000ED2CB40F3B19E55B1D4A6E609F92CA975E
-:10EB8000C06FCE40BA16D58AF72FAC651EAF177E80
-:10EB90002E2D5F1A116F91973893E75EEC3B9F978C
-:10EBA0003A77AFABC78FF71CBB667EB5B109F936B4
-:10EBB000D343EF399916D7D1EE64D2C37C161B37F5
-:10EBC0003775DE2AD3CE637DB61382197CDFBB1383
-:10EBD000BF040078F901475ADC5350951EB7DD5D3C
-:10EBE0002BEDECB5A1030580DE6F4B3C5954D45599
-:10EBF00079FCE911CFDB756E2F18DA3BDBFBF5767C
-:10EC0000AFE1F1D9CE7F3B9E8F7B647CD492761F9F
-:10EC1000D6C17BBC0ED2EF4E5DEBC2FB1E9D5E8D5E
-:10EC2000C737BAA33EDBFD95DDB58AA09BE3E513AC
-:10EC300078A9C1E514078DB45FB79017D9CF2D37E8
-:10EC40000DD2473D10C53CB9CD3B4EC1FAA81CFFC3
-:10EC500068AD22E485D797BB445C955BD61B77A053
-:10EC60009C4D583F1BD9E68138E93C3CF794F7525C
-:10EC70005CE59DE832B3E1FDCF025E9733504F79FA
-:10EC80007FBE8361DEDF5592DD8FFE632D8F33DB28
-:10EC9000F459519C6F015FA629C3E77D5CC8C1434D
-:10ECA0004E9043D8BF6BDA5D744FAC6B3223FB5D83
-:10ECB0005A37FDD1ADDE2C72A8DF47E7E7F431F912
-:10ECC000FE3DEDBE449BDED0B816F6D59E6701B47E
-:10ECD0001999FAE69CB0BC712DDEB7A8CA0DE0FC0C
-:10ECE0001AF5C716F2B123C0A8DEA115367BA8EE2F
-:10ECF0005CACD1FD08892FC4EB8FA19D1A4DBE33AA
-:10ED0000F181FD48EE463ADF4CFC28949FF50EF366
-:10ED10000BCDC66816783F4FEA55BA7C394791AF9C
-:10ED2000D1E849F3AFC529FFFA6CEDA675784F6DB0
-:10ED300027E3E3A76A4394EF67F6AF959EB7693D73
-:10ED40008D782E6D535D247F99EBBB4A385EDD27AD
-:10ED5000AAC5BE3E05E57F5755510EDA772F1A6AD0
-:10ED60001B5F9FA930CFD5DAE2A6C2482F8FDB6B9D
-:10ED700019C9AF578FFAA6825C78CFA82053C07705
-:10ED8000C7DB7F3CA7BF773EB21E83E4964C3B9720
-:10ED90005BF636F0A54088F518F6703FBF2FB299A4
-:10EDA000E6497EEDBEF1B781F83BF06DCCC2F4FAD6
-:10EDB000D4BBAD3F2975F9E388CF392C07F97C899D
-:10EDC0003DA890FF8E18A477BEA45DE5F756C6C98E
-:10EDD0002E90837D123925559762F8DE03F5CB64BA
-:10EDE00014DFD0CCEBC42B2FA2DB47EB260930136A
-:10EDF000F1428D8AF2CFEDEE25F61ADF1F96E1BDC6
-:10EE000015C572909FBD11E51AE69530F34FE7B234
-:10EE1000DCE799EC6B3EB80EDA4975A29E26E8193C
-:10EE20008D1F12EFBF94DCCAF820B38E2AEBAC1D05
-:10EE3000A2CE3A5A1D956917896F32FECDACABD27E
-:10EE40008D3AD08FB76ED25837F19DC70BA93CDFF2
-:10EE5000CAE375787EFF6E9EA0EBF0D9A45FA4E7AD
-:10EE6000D26E65D2F9E4287EB1FB4C7B1EC2694BA1
-:10EE700034517DFE907FDB2905E3DC844B67367DD2
-:10EE80003D9C9FEE373A84FDDB5627EAF0E73EA52E
-:10EE9000627D609EDF52F1DE5E5522407EA14DC94B
-:10EEA000FEDEA1BB8EFB9B617E22E3FDCC7FE6787C
-:10EEB00063AE5296F41FAAA053FA57E08F62D7BBF5
-:10EEC00043F2BE9761E8BEB9A9F8B3FBE98F321DE2
-:10EED000E323BFADEE5B9A65FF617163BA5F5006D5
-:10EEE000F9FD30C9D76E9177B7F9F979CC4102B203
-:10EEF000F801887F3F5B07F254D99F6E6FF2CAD248
-:10EF0000ED4D663CECF6302BD7060FE2E1D63A52D7
-:10EF1000DEF478B6B89E91BC1E2EB454ACFF8413B8
-:10EF200006C3F3D08A4D86E7E1F2BFF37934D6F118
-:10EF300078A1A3AC298A7993AC3FEF5E741BD957B3
-:10EF4000F0A33D75B6BC49DE7778B7F52829AF5AEE
-:10EF5000867E66D6A5BA17FE3DD5A1DAFC4D27B14F
-:10EF6000AE7408E411F5ED70BE9987F725ADE7554D
-:10EF700076401F5EBFCAA44BD6A1C6D78B7B2BE7BA
-:10EF80005CF1C5788F7290BFA7D0064DBA7F02F4AE
-:10EF9000D07BA279E23D5166DDC9ED6EA1F773F138
-:10EFA000EA9655F6BAB3E45BA390E797AB4DBA3750
-:10EFB000D43142FD4FCE7333C31A87EFC7AB3F4BFB
-:10EFC000FCC6CFCD302F97752D7D86F9BD3A98E7D9
-:10EFD000BA68AAE375CCE72C3A87BC7F6224642C1C
-:10EFE00057891D80F54F2F7A8AF2CDDF27D8587CBC
-:10EFF0007F92CC37359E6FCA3C56DA8D1AF589CE92
-:10F0000052183F7C46A33838EFE9AE5358770F9E2D
-:10F010005947399FA1ACCCC37DE43D2689F7D5E69D
-:10F02000AB9598AFDADEB748B8DF69ADFF05CAC562
-:10F0300093AD516AFB5A0D6ABB5B1BA9ADD28C30F4
-:10F04000FAA5AA7ECA00D9822118B7E1517516D651
-:10F05000DBCE7F5785F9DFC8B7CAFE68DABCBCB221
-:10F06000C6B479902FFF1AE7697ECE4FD71285EE8E
-:10F0700027DC39C81E52F42C76E1FFAE5DCAAFBF63
-:10F080003676A9A89EF29791EC1223BDAB1A14EF25
-:10F090005DA57D12FAF7789D4E7A91D4437CFF4AA4
-:10F0A000FECDA2F59DF8E77CA067CCC7B81D4BDD6F
-:10F0B000F3A0EF1B83E2BBEB9B4F2EDA8FF7803A76
-:10F0C0005E94E3CBF71BB67166D534E3F726C73001
-:10F0D0005986B873C7C9F1CDF45DB6F8AE26DC58D1
-:10F0E000583CC052F71F33F9B5AB9EC7EBF27E4DCB
-:10F0F00090F1FA9A1CFF64BDC8E3801CACE3C9FB25
-:10F1000013B9237C47F4F17A6E0F3E23F8D4E9E279
-:10F11000F71716677C2F1212FB8EF4BDC836313EEE
-:10F12000DAF721ABC47E4D62BFC7E6446FA3738B91
-:10F13000F2EF329AC5F30567626D633068F4B3ACE1
-:10F1400070960B7BFA6C3DBF97ECF21B1A9E0BC0BE
-:10F150006B20788DFCBEA61C5F702139DE48E30D64
-:10F160007C7CC10593EA4AF23BBDE5F565FBB74EF1
-:10F170004DDDD3E9C0FA8417BF57E1F79FBE26F0F3
-:10F18000CF6CE5F72A77F9C47D1F3675BF81700C07
-:10F19000FE7DE6EDF5B70CE177C7B0FF06DA5F7CE0
-:10F1A0009FB300E9ADA4E7FF40CF33FE9D81F5F5A5
-:10F1B00093F78BEF7AEE433D612D1CEFE4BF9B602C
-:10F1C000CDD96FFF4E6841FDEC66317F33C1DBC0A6
-:10F1D000E7679107218F73F7634DF60AE0B512BC1C
-:10F1E000D51CBF5BEA757EDE19728BDFFF139EE2D2
-:10F1F0007BA133D1751EB4E7C97F07C09A4EFB5D72
-:10F20000019F76121C53EEC7C4BD28AE1752FEA54F
-:10F210003C7C4BC8DFEC7A45CAD517687DF335A333
-:10F22000FF1B042FE3FBA4D1E828AF887E93D6F917
-:10F2300093F793FF95FA57898FFC9E2C532FBE2787
-:10F24000E8877DFF83CE0BE22FC413F63D742DF6C5
-:10F2500005B87182E349C23D762DE032FDCAEE99D0
-:10F26000FC2FBAA2684270460000000000000000B7
-:10F270001F8B080000000000000B93E16660F8514E
-:10F280000FC121486C62F17A76068678160686B937
-:10F29000AC0C0C3540ACC8499AFE5540FD4B81780A
-:10F2A0000110CF06E269403C11887B80B81D88655B
-:10F2B00080E68903B11010F3023107103303F13FE8
-:10F2C0000E06869F1C08736E03C51E93683708DB05
-:10F2D000F220D8E781FEDF02C437C80887513C3CE2
-:10F2E00070163F03439D00822F2C882A9FCD8F608C
-:10F2F000F38A5266971C503F008DFE9C5880030095
-:10F3000000000000000000001F8B0800000000004B
-:10F31000000BE57D0B7854D5B5F03A73CE3C333312
-:10F320003909794C20E049483055C0214004A1F505
-:10F330001010432FD78ED42AF5A2774004E49554B9
-:10F34000B1D2AB6D46264050F4060B0A0A3A50A8DB
-:10F35000D08246C4962A7A07454BFFB6365A6F7D4F
-:10F36000D4F6C6DAEBAB18E28362FBEBEFDD6BEDB4
-:10F37000BD33E79CCC24A0C5DAFB874F77F6D9AF25
-:10F38000B5D76BAFBDF6DA3B1EA884C273013EC68B
-:10F390001F96DEE60180E24C3AEAFAAF2EDA3386B7
-:10F3A000FDFE7F3DD11D46A69E4C4F0305602C2BD4
-:10F3B0000713A004E05C1FFB95D59BFCD323BF3D46
-:10F3C000AB08E020A8E0659FD2DAE401FFCCFA396F
-:10F3D000F82144B1DCF5D360796710DB25A8DD970F
-:10F3E00080B74B5718E5FA70CC800BBF9B3EFA9D57
-:10F3F000F5337473136B7FEC8320B577C22153F818
-:10F40000D00569D1E6E34AEC577BBFB346E42B80D5
-:10F410000D0E02DE29007519780FFDEE7582F77169
-:10F420008DC16B6419DFC7E02FCAC07F10BE9A0F71
-:10F43000C339FC665D06FE938587E6CFF09C6C368B
-:10F440001EA9AA0658DB0C8F54B901D634FB28BF7D
-:10F45000BA59A7FCCAE608A5498D356170247742E0
-:10F460002AC1501F8AB2FAB27FF65FA0CA67CBFBEF
-:10F47000CA755BDE53C4FAA9C9E4B5A061CB278382
-:10F48000F5BE7810C76773F7E2F83E4A1998CF4582
-:10F49000183ECEE455C16F246602A34775D063A41D
-:10F4A000D83CCE0CCE9B0E61AC7719E1CD23F07A1F
-:10F4B00075D98A4E84F77D560F58BD338253DFC409
-:10F4C0007AFFA7E2FB7C1E1B014AD9F7D5DF6EEA63
-:10F4D00054587F2BCB3CC60A36AF7BD9F8ADA75B1F
-:10F4E000F0B85BFB03E2CDC7FE211E6B36F37C66F2
-:10F4F000DEF6FC19C0F272DE15997E4EB6DF61EBC6
-:10F50000FBEEB7DA88D523BFCA7E87417C851EFC17
-:10F51000FCF67B26C3F980DA4CBF729C7EFB65EC5F
-:10F5200010636D876D86545AE93D4EB5116D4820C4
-:10F530003F6CD62055C1BF1731B9A81672D1A2CFE2
-:10F5400008205F39E101EB389519BA54177966BB89
-:10F55000189F54472E5EA4205FADB7B4AB049072E1
-:10F56000F3EFCD3A986C1EB734D750BAA3596F4712
-:10F57000B9B9E5237566FBF0DEF2F8DF425FDDEA3C
-:10F5800006E2BFC42E48ED50B0BFA61766B3FCDA42
-:10F590005125B53719989FE942FDE0177CBC5631DB
-:10F5A0002EA9C4FACFA8807AD0290FB7B8635F46D6
-:10F5B000795833CAA5AC403C577179A876A77D43EA
-:10F5C000D9F7B5EB2B473188616DF4599287EAEA98
-:10F5D00061868AF25025E461ECED3ED4873DF35F0D
-:10F5E0005ED25E3500201FE913CCD04B3F413ED0A8
-:10F5F000275AF0F519CAC3A9E3AFB63EF96B6DB44B
-:10F60000F24D2F2BDF51E53154A5375C85A7A5239B
-:10F61000B1E1BDF9ADBA4AF059B46F3E73A62B9B68
-:10F6200053F02A1BFCF6E608F1DDFA6683D29B054F
-:10F630001F7A91A7C6B3BCE043281F43F99CEB1681
-:10F64000DC487CE92E4A01CAC9EDC89FE7E0702B6F
-:10F650004D7322D3913522CF9648175B03D663F9B9
-:10F6600040CA9B508EFC29CBF7264CD6BEB8869755
-:10F6700037287B13B866DCEEE7E55F56BACDC444A5
-:10F680004BFBC4CDA6599EA9CFF2E97ACDDA1FEB88
-:10F690007FB8051E3844F5657FF39457797F7EDE89
-:10F6A000FE26E52533517EEAFBBF49698B30D30244
-:10F6B000D638FAB9A927BFCE348767C6A9BCF17E70
-:10F6C0003311B496DF6F229E64F938655D22C1EA7A
-:10F6D0006F845895C2E85038B329C24C23F0CF4A02
-:10F6E000996EC30A1FC777667EB713BC812A5E3E38
-:10F6F000E2C6E7CC6455A67CB2F2AB04C2EF2F8A17
-:10F700008321EC055C1FDD9CC5981D547ECD2F1810
-:10F71000DFBB4B3D51B23BCA59A68C7D8FC4C1AAF9
-:10F720000FDC11ED35AB3C4B3E64F09E43F0C69AC6
-:10F7300066E68037618557C2D31FFC128EDCFCCA97
-:10F74000C777F255FDA5E37E3591B1BABFC31D451C
-:10F75000B3014D282864BF7CF85D53615D965CCE93
-:10F76000686010FD66C2D0DEFD96CE1C08298BDCD9
-:10F77000FFADE95B85798EB7D94A7186CE2C7F853E
-:10F78000158FE7887A4E3E94F3F3F49ADF15B6F9B5
-:10F7900081D6168985FA9FDF7A7F7C662CD8BBDEFE
-:10F7A000D38A42E3D7CF18F715E0E381B782962CCE
-:10F7B000136A33E3155D2CC74B651DAF38766AF1CC
-:10F7C000E9944B09AFBF17BCDFB5C17B939BC96FF1
-:10F7D00016FA9F6A78034CBF9E941CD69C981C9E78
-:10F7E000AA7E8BF057C65FEF69903E97E175D98589
-:10F7F0003EB2FBA5FEFBACF15782458C9ECB7E79D9
-:10F80000C52BE7BA30C3F87C4466FC26C520B87324
-:10F81000F17BAEF900A46CFDFCBDE6930BAFA75ADB
-:10F820002F9DA8BE5DF19B00A07CADAE8214DA18BE
-:10F83000AB0F9F970FACBFD5BF985C8A70785BCF3A
-:10F84000047334C0066CC2EC8DD5D2FEB8A8F68421
-:10F85000EC8F9B9AA1BD85D9350F859BC85E5AADAB
-:10F8600000B567FB524831BB66CC33DB7DB311FE7C
-:10F87000E86D94AE76B3F2207E3FA44F66530854F1
-:10F88000178E62E883D57EF9FDB986A1ECFBCD55D4
-:10F89000EC3B638DD521DE1FFB1EC3FA79D5FC7BC3
-:10F8A0002EB8F26A183C16BCFB3DA978367D59EF9C
-:10F8B0007211FCB7A13DE6C5FD8041A93FD01647B6
-:10F8C000A60B0CF118DB2A7AB79BE5E2FB8175D514
-:10F8D0003F4AE3D67A8DB0EB1E3FEFFBD089FAA208
-:10F8E000AACD7461FB28771DDCE6B0BB82C3657EC0
-:10F8F000A03299751070E46FE9B1E32A27A11D17B2
-:10F900001676D0792BCE9D84EB6C4F398CB295CF87
-:10F910005971F624B4DB0A7D4D2F4C64E317327D18
-:10F920009A44D1D10CA509EDFF8B0AB3F2CBBA6989
-:10F93000BE992956BEEEBC61155766D9FF302AD252
-:10F940007C657E40839DAF6F1376EC2DC2AE2D4754
-:10F95000191F2BF88F098B9F57EDD16BFED3B95E22
-:10F960000BD41837225F0E688028DADFEB18FEE22E
-:10F97000163AF96BECFAAD50B3CFEB54CD67239840
-:10F9800097B9C6E6EEDF295F1B217E25D62F14EB43
-:10F9900056A026AAC487F73F7FE77C73CDFB2B02D6
-:10F9A0009F6C9CABB38DF359E1A530C8C619F3B772
-:10F9B0001F2780E358D7B113C43B2CDE6EE27E1BB9
-:10F9C0006510F7737E98124DD33EEF7AF2D35D2B1C
-:10F9D000FA84F8261DED1C82394BBF5A9527E36F38
-:10F9E000C3FFA9B3F2B3D145A6CB5F7EA7E090A534
-:10F9F000FE7657A8E835DCD49F0D677FAC66DA83C6
-:10FA0000F0076A128E60A14D9F1E6FEE2E38C4F46F
-:10FA1000C6CDFA0CD2C7B9C6FB21D3A3692657BB02
-:10FA20009A7D94DEDBAC43DA8B7E8B08A5DF63F234
-:10FA300087DFB7B27D24A6F73447E9FB96E67194D9
-:10FA4000DED56C52BAA9B981D23B9A63546F43F3A5
-:10FA50004C4A7BF0F9211BAF4EAC6FCCCE3A7366AB
-:10FA60002AE1423FEE3E885633FCAEC6EF16F8D789
-:10FA7000B9263D4E7232D34F7E8F02E1F70840CA5D
-:10FA8000ACC276CFA9B00372CF2B29E67581EAE22A
-:10FA9000E36B35347840CACB6EA075AB640A5BB7B4
-:10FAA000185DB582ED85885796A7EF056C3D43FF3D
-:10FAB000A07F0AA4FD23A98986ED8B44FBD6A08BE9
-:10FAC000EAADABD168DD73F2C508D0A75561E59802
-:10FAD0008FFCD4BE90C6EB4FE4E3159CCF143DB32E
-:10FAE000EB5B751775BA6E0C5F3FFD358C5F2C7242
-:10FAF0005130F50F486928572B691EEBC2535E64DD
-:10FB0000DD317ED4CB2A583F77B02D35AE6BBBB6F6
-:10FB1000BFABCFB6D039A8727B7DC4AC773B10BFEA
-:10FB2000233426D76C1C757B2085EB0EA3878AF0C7
-:10FB3000E60B0532C2C7E7ADB6406A9B9229D70BE8
-:10FB400038DE47E85113D7B99EEF7EF1DDE84EABC2
-:10FB5000D82E05D16D46A63C24DB99F67621D92E08
-:10FB6000018A86EDD6B37690290FCB7630CAD62E91
-:10FB70002CDBC1B3268DB7D1DECE5F207026E61F09
-:10FB80001E1775C52DFAC15F65BAB8DCD8E9948B2C
-:10FB90007F8A40D0E1F184F231E2630ACF2B8AAF51
-:10FBA000F56317FAB3EC721D1E63A71B5459F28C50
-:10FBB0007417A1EC16931DD480F6C6B6D6ECF4DA11
-:10FBC000A0C5A655E3FC266AB6F9493A6DF0093A94
-:10FBD000B606B2D269832EE8B8006C7496F4DA20C7
-:10FBE000E9B52C3BBD36E4A0D70649AFE5F67692E1
-:10FBF0005E1B72D06B83A4D7627B3B492F273DC22B
-:10FC0000E3D28A9D6E6D943F55F470EA850E97415C
-:10FC1000DF5DBB4D7D12EA871B34DA57438DAEE0C2
-:10FC20007E00CA4F70FD8026C075612DFE2AED331F
-:10FC3000368F5D788EC5ECAB39C95727A11D1E5490
-:10FC400064F9A14968876FF3F0FC75C9E393D00E9E
-:10FC50007FC4159BAB92BD93021ADF812F6F2C05D9
-:10FC60001B1948A76B4D3F43BE397DBB2B9A3032E1
-:10FC7000F07881E305B7EF1F6759BF72CF43E017F4
-:10FC8000EB0C3D2138BF45706A299A772F382F62D7
-:10FC90007032BBC240FE66FC6BB49E1A38612E5FA8
-:10FCA0002F7AD667C7FED7D9FE8CED2E1BDFD46C1A
-:10FCB0000ED8F866D8FA425BBE6AED405BBEB2A5CC
-:10FCC000D296376E38C3D6DF9065B5B67CF9E2734D
-:10FCD0006CF98173EB6DED7BF10B707ED9A9BE7C65
-:10FCE00023E2B9870E899A7AA283A8BF3B59536F42
-:10FCF000E3A71CE55FF9B666FA18FEB5220FAD431F
-:10FD000000D7107E24BEF275487850BF140553E723
-:10FD1000B3F2806E26D02FA0EA26A01DE1D2E39494
-:10FD20007747ECF275211A4A8CFE5FD9A5816F4C9A
-:10FD30009FFD9B9FA4FFFEE6E5E417B9BEAB457CA3
-:10FD40005DBD836D97D0DF9360FA71071BD7CDCC73
-:10FD50001C7F18F942F00FE367D42B459A22F6175F
-:10FD6000272767D529BBFE19BAD10E7F459B431FB4
-:10FD70009D207F7F56F2DB1FFE364034817ABC3FE8
-:10FD8000FC8DD114A1FF4E4EFE872CB3E3A77CB1AE
-:10FD9000C721277F5FFCB5AA20F8A2A91EF112DABD
-:10FDA0000C705305DA5DCFEAD9EC0AC92F77CCBACB
-:10FDB0002D60B5F7618CC776FE2EC7A1BC9A2DFFCA
-:10FDC00079E313A847FB2394E03EA46DAD39E62FF9
-:10FDD000E8BDE1A2CA80753DFFBCCF3F43E76F9FFE
-:10FDE00054FB480FBCE5FA6B7916F81DFBB2DEED4B
-:10FDF000135C5EE27E97554FB29F1AB4B7821088AB
-:10FE0000229E8FFBC323219FED0F7D3C3DD5FBB68A
-:10FE10005DB3F8FE26F1725EAA1AF189FA1DCF8D44
-:10FE20005F1E9122BA5FE482DBB17CB88BCAAF0B54
-:10FE300084B7215C5F57E3D76BC508EF9014C55FAB
-:10FE400068697D46C8324F6117C9F9E7B28F56B568
-:10FE50005C5B6F5BEFE0E27AF4634A7EBCAB654DBE
-:10FE6000BDB03B5AB5CF957D9413CE2D1AD99B9F2B
-:10FE70004FFB4885ECFDFCA3D847BFD096AEB0DB66
-:10FE8000470F733A88FA1D2D0FD79F48B9B48F02D8
-:10FE9000418FD8D73BEC971A661FE1795250D82F83
-:10FEA0003529B257FC35296EBFD4487BC6BE7E5D6E
-:10FEB0008B066871C63EEAA37FF393F4DFDFBC7262
-:10FEC000ADEFFEA0B48FDAB87DC4708DF1276A0D56
-:10FED000F77BA88EF57D9CFB7FBB7D945D7EFBC38D
-:10FEE000DF0668E3F6513FF89B990B7FFFE0F6D100
-:10FEF0006E0DA47EFFFFC43ECAC527FFBBEDA30C59
-:10FF00009DFF36768ED3AE9176C4A9B66FA47DC21E
-:10FF1000EC981A0DF51EB3B3D08E39EE6AF7DDCE2C
-:10FF2000E6739DCAB03514E356F87EE6062DB6C1D9
-:10FF30004DFE8DB48E76C666D4E763859E45B90FB7
-:10FF40008AB83D2D0A334660FDF866B7E51C420DC0
-:10FF5000A6F59E739BCF111E989D679FBFC08BC453
-:10FF6000C37E7781DCF79C1DE3F3FA31E101D2DC3B
-:10FF7000DED2D23E4CFF43AC6FB41E1759F1C1F133
-:10FF8000A3468D14EA03D6FE3FDCC536BCF86C7878
-:10FF900061EB101F0F546ECFC9EF3C0D8CD115F4DF
-:10FFA00087B36C07F2EF002C3298BC415BC330D6AC
-:10FFB000FF80D8AA6F60FC5CE8E5696F02D3BF03DD
-:10FFC0003A674FC7B46578EDE17A562F3FAA5F389C
-:10FFD000D5C07515C8AFB8063BA3F3505772D270A1
-:10FFE000718EC3E4F9D995C7853C9B60B7CB5D861C
-:10FFF00026FD4995B9E585FD281F7B7BB7CF251FD9
-:020000022000DC
-:100000006EAB5C937C5E7D62F2399DCB7582FD4365
-:100010007D51E0E827DFB4AF1321B0E459F98782BE
-:100020008F01BEF1998CA7C36D3E03E34FAA5C3AE2
-:10003000C64DE6835E80FC1798A201C659EA45DDED
-:100040000974C1F6479716E14747BBFF42CB7EA232
-:10005000C0C3E5B568C6948A95ACDF6363787CFE5F
-:10006000009DC7813AE77333CA97D7921FBE8DCEE2
-:100070004D938C9F2AF9FE86CE6FD654EDD5ADEB0D
-:10008000D4688FF47338F9832DE175C29E66F851F8
-:10009000AB5C26DA019F963FD44FC81F79D31DE78A
-:1000A0004927492F53DCBB3851FEF8B4E349BAF66F
-:1000B00096AB1B894F8B66CCF5A1DDBF2A32A3CF4F
-:1000C00073D4DE74BD8DE81AA8023395A5FFF33C06
-:1000D0004A26AEC0195F6BD91F39ED75B5B46EE60F
-:1000E000D6BEE856E4B4CB78BFFEE5AAF147545E2D
-:1000F0009A4EEB804FF4B7C6B82D81FAF318DA0C9C
-:100100000C1F6ADBA834EA4FA882E80E5E85E23F46
-:10011000FC8649FB703AEFAECBC0E72977D9C6D34E
-:100120008A02F6F3E79909C50ABF7FB987E0F0E1D3
-:1001300078A8A775D6A182F730B87FAFD7FED16176
-:1001400037AC2EAFCD1A67A0FDADF6AB17D9E13DA8
-:10015000E17641CD78CD6247E56EA7C16B167BAAEB
-:100160000DF9DDC207ABDCB05F61EB70327231C4F8
-:100170000D96C7A23280564CC7231FD6F2757DA7B5
-:1001800042E7C324D206FEC7CF892EF318D49FCBF3
-:1001900017273CA94113A8BE7162E748C707F3F8C7
-:1001A000A422056CF5EFF778A85F0D62749E7EFCC3
-:1001B00077E747A85F937DAACBC0E1ECF7324FFC0D
-:1001C0007E4F31B21D87071B903F621CF70BD0DDBD
-:1001D0001CD6EEF8BA19749F28177C9B1CF2B549FF
-:1001E000C465416C4C3FF3E2727C9C8DD981F5B5BE
-:1001F0005880EE2DB5717B68B0187FC7B219F47DB9
-:10020000C7FABEE57C8BB08FEE42FB88EC1C9DF2FA
-:100210003D708978B33B057CF27B8D97C7671D15D0
-:1002200072BFC36706E85EC013D3025F60F255F980
-:100230009C1AC523CCB2356D057D8D3F70AEDD3F78
-:1002400072B2F11D9D9E5011D9D18EF88E5CED6574
-:100250005CC7A7C5CB9D621F53E35D90A4F393F4E5
-:10026000B9249F95428F542E03B2E3062F8694C182
-:10027000EA1ACBDA47A591AF3FFC18AC7C3218A242
-:100280002E20BD600667D7D1BD094EBF36179D53DE
-:100290000FBECA93C290B661C20E838DFC3E83BC72
-:1002A00077B1C3175DE1457DD74A961F5426ECF719
-:1002B000440683E57E04D32383D0AE637A6990E35A
-:1002C000FBA7A54381F7EF43874D5A9B5FB7B42F38
-:1002D0005320966DFD3BDDCBF9B4ECCAF779FCD722
-:1002E0000D417855CEBF12E9D9568074B86BEEB384
-:1002F00093F0DE49A215A2781765C8727B1C449D55
-:10030000378FDFEB00338DF6F2CAD917773E8A7448
-:100310009D0836FD95456FD479E93E08D71B9BE6CD
-:10032000CEE0E9872AF149D53248E13DA3296D4D58
-:1003300007DD2C5FBE1CE8DCBCBC35A1A03FABF2E6
-:100340000688E23083D181C7F255B32065D2FA0521
-:10035000CF45EA68A9A39F0AE4135C775AECF773C8
-:1003600086DC60E78BAA56FB7D9C52C117A50EBEAA
-:1003700070F65369B44D4378872E73F17B3B33EDB0
-:10038000F76BAAA0FDCDEFE37C0E05A3C8EF556B7C
-:10039000EDE33AFBD720FE75C4CB434B374F3B9D73
-:1003A000D5DFB2AC7E00E265872F964FF7A2F01240
-:1003B00051967D712F7E95F6468EFA19FD99B0C53E
-:1003C000333BD3D5D525D7CC61B5D6841240E327AE
-:1003D000BE4E7ADD2DE4F589C1F3E85ED7AAA25AB4
-:1003E0008A0B3B8879B4A7CA87955AF5BD1BE3767B
-:1003F0000764F22B518F66E1F3E5822F5F077339B3
-:10040000E26194B72982E37ACA4BDE9BCDC663CB07
-:100410009F99CAD26EA137C0E7AB6B7FB5DF6F0A79
-:10042000EAAF894B6C24874527E657B8D21BBF1922
-:10043000C74FD4B36D04EE3F0B219544FA36B5098E
-:100440007F7B4FBD36512F81F73B7BEAC5DBC0BABE
-:10045000DF64F536887AA6AD5EAC57BD3B453DB04E
-:100460008D6BF61AF71E091F58FB8BF6EA6FBBB7A8
-:1004700098C307D6FE8C5EFDED92F0D9EAE9BDEA9D
-:10048000DD27FA03DBB8601FB7A77CA44794C72811
-:10049000FEFDF1E2A9C41F878AA736E07DC46B7E0A
-:1004A000E6163AE2725AAF55C1570745BD96602D20
-:1004B000D90DC966685DCCF696AD787FB81AEFF1B4
-:1004C000CEA17DBEFC2EE9C7BEEBD9BF5F4DF77E46
-:1004D000E577ADD54F71E4EC3BEDC35A3E52851F35
-:1004E0006EC0143CA76C8DB884FFFBB5A459C5E45D
-:1004F000BD4CB3E5D794F3F251ADAF2513789F48C7
-:100500008BD1FD146F041E196ED1233DE37F66F07D
-:10051000F3738C0CFCEF3BE07FDF06BFCCFB07F3F3
-:10052000F2B1BE639313ECD795A84BD97E7998AFFF
-:10053000B885D6F3CFEDFC5C2DA6669D1FCF67E690
-:10054000C7F3727E67FBD429FF58F3D31DF3D31D85
-:10055000F3D36DF31BEF2B9882FC78A2F373D6BB19
-:10056000D91D8BA0DDBAB2F84764FFAF1C0CD4EFE5
-:1005700004DF8BC91BB19CC97607F56794A2BE1F27
-:1005800005E6085F71FFED9EC62072DCA786787CC9
-:100590002A147BC439702C82FECDB7BCBA889FE385
-:1005A000707A7C3ADF37897CA523CF7EF92BAE9B0E
-:1005B000189EC8F7910E3DDFDFBA5651321AD7B5F3
-:1005C000D690A958D7354FCFBA7631AD6B2B23D9FA
-:1005D000D735DC36D3BE48AC357734F3F7043688EC
-:1005E000FBB12BCB6BA9DE06793F253195F49B5CE3
-:1005F000371FFFDABC860AA61FDF7D8EBF1F71C0C2
-:10060000C7FD3FAB9BA19DBF87E0A3F431D66F9C94
-:100610005538C0EC3D4C1F66F61EA6FB9B2394FE8E
-:10062000A8D9A0742F1B17D3FB9BA394EE691E4778
-:10063000E95DC25EDC24FCBD5F2A77D1FAF9BD66B4
-:1006400058AB55A39FD747E93DCDFA5ACD8DF665F6
-:1006500084D23F2B3316FAC85FD199CC67F47AE87D
-:10066000D92ABA373EB15C237F076869357F4CE6EB
-:10067000BBC4EB9F95FA461FA3D339868BD7F3A54E
-:1006800092E1ECF59661BD718646F04030A1868B13
-:10069000B2D6FB16C25157C4E1063D9E0C65EFEF82
-:1006A0003BD85F6D9180AFC84806B3F797C4FECEC4
-:1006B0008A08F822DD8FE765AFD78AFD8D8808F8B4
-:1006C000CA3BEAF3B28F7B0BD62B2D6CA37B3BE7A7
-:1006D0002E06E26F6FB9B1957C15A2DEB6C14DE072
-:1006E000627C5B3AA0AD09EB7DB12906952CAD2C5F
-:1006F00089818BF1BFB78895337822A29F097379DE
-:10070000F9362C0F59CA45FBF10B5839CB5796DAFD
-:10071000CBE578DE3690FA24CD8C50F0AE859EFB8A
-:10072000D5982F71F1FC1EDFBF4C41B92F11E74E58
-:100730001D22EF6DB1B72F09F07C1ACBD938256196
-:10074000DEBE53D42F2DE4F3F65FEAA338E17BBE7F
-:10075000FDCDB239C333F33DED3BCBBF30C732BF24
-:100760007BBE731395CBF99CD6BC96CA73C96B64D8
-:10077000960B4C8BDE2A691B4EF6A4B40F479D7670
-:10078000717A36A38B3BC6E1EA6EAD6C5951457068
-:1007900025E85C55C0B5E55A3B5C83BF69876BCBE8
-:1007A00037ED700DBEAE6FB80EF8B85ECB051F1BEF
-:1007B000DFB48E9FBAD13EBEB1C23E7E6A857D7CDB
-:1007C00023F9A9C74F5BE972F7B7ECE30FF937FBE1
-:1007D000F877FF9B7DFC21D77FBAF1FF56F6B8E989
-:1007E0008B7FE413F6AE6AB53B9B1236BB93D57391
-:1007F000F985BDAB5AEDD878C266C7B27A5E51CFE3
-:10080000B4D58BF5AA17F40B7BDC36AED96BDC02C2
-:10081000512FEDB2F617EDD55F8984CF65EDCFE8A6
-:10082000D5DF20D19F69ABA7F7AA6788FEC0362E17
-:10083000D8C70511FF759D88FF2AF070795D1EE706
-:10084000FBEC52882BB8DFD707C0A843B83E0FE5B2
-:10085000EF21154C5D7E1ADA27CAD4E5A7E3FAD753
-:100860005A00B67DDB343FDFAF8DF3AB348E9E078D
-:100870004D580EBE44D98596FBAE5B45BD9EF260D9
-:10088000A2ECAB96F22F8BF6ADE2BEE0F96B3A5AD2
-:1008900050CFE88358FD2CFC375DF627CAA128DA33
-:1008A0006132B8375E3663EC4D601DD7CDE13A4D0D
-:1008B0008C5B9E1DAED60A3E6E4A8CBBD52FED8D4D
-:1008C0004419E151E7A9FC7E7BE89BCA1F197E60B1
-:1008D000BBCFF61E5081A7E9DE0A064772B00BF0C7
-:1008E0007EC2EAF2BEFD392DCD76BFA7A6C7E81EAF
-:1008F000F9C0057AAD0AB9DBDDD9E06AC876EE3019
-:100900005FCCA765417D5B15C277C8EEBF650C0E55
-:10091000D67BC89779E2F391CF7AF96F5B7CB67D8D
-:100920007E4149DFF7BEE4FDA89E79B08EB2D1EDDD
-:1009300056BF38E77A8EF72FEF9B1514BA68DF7928
-:100940006C383F2F80441958EDB18281F53EEBF8A9
-:100950006B1CE3F9618689F6272E53282F9E2A48BF
-:10096000E1FDBA40519B5E81EB42A483CE0141DCA4
-:100970007393FDB64466D07EFC98B8FFAA45DA268C
-:10098000B9487E047CBAD055629C811B354833BD82
-:1009900076C81DBFD55F6CA59BA920FE8EBB53E416
-:1009A0000F4A5630FA2BBDE7BFC9CFEF8FDD69CCB8
-:1009B000F8554516FADEED376CF70D077EE081F449
-:1009C000E8DCF533F5385C3D7C1B61FC3A82F40AC7
-:1009D000F1ED368FB9CD9F2DCE42EA0771FE3D670E
-:1009E0001C881FE392DFB2795C75D80D284FF29E08
-:1009F0008D3C17BA4AF8C7E6083FEC5C8885B1F031
-:100A00006D70D1FDB1B7E1D9F0680BFD1FF3F3F3C1
-:100A10000526E0E4FF92E7BD57B6B96DFEB0F91BBD
-:100A2000EDF97930A304F5D6BCF56E48317C5EE56E
-:100A3000F097DD27E63B1F9A56A11DB0D2CDFDF2FF
-:100A40007374D006B0A565C98FB7D4CD66F92705F4
-:100A5000DEDF627C6358E46D6130E5C1B89B57F717
-:100A60008DBE780260FBD4AA81A86F0B20EB7B704F
-:100A700057B4DAE1EB0F7E27BC002B08DE5C706810
-:100A80003B95ACFEAD5FFBEDE789B9E23B64BCC5CD
-:100A900031E423AB1FE6F779A924F94779DC457FD8
-:100AA000EDFFDA4FFB25BE4E0FCA4FA3D6D4A0B838
-:100AB00032E7525E77DC1CC4E6E9DE3F293D086C74
-:100AC000F55AFBAED73D15485F32C358CDD45B0A0B
-:100AD000AC1ECAE5810B13B67A55ACDED0DCF5BA94
-:100AE000845EFDE9EEEF79701FF7F60F5EB900E561
-:100AF00072D1232AF8D8B85DBB4390A67D4CCA8337
-:100B0000FBB485FBD4ACE7B81429C0F0B0E8FE1004
-:100B1000AD970BF77A53D359FB853F7A7524303C58
-:100B200074ADE87E6A10AEBB3F50F8796AA27324B8
-:100B3000AE6B0B35F8D75896FE2201CE87477E92D2
-:100B400047F78E959D072FA77EDB2F717B2DFA220D
-:100B50003FE0A679B17ADC1FB74B495567D127F240
-:100B6000FCEBC82E85C3B7DF9DF2237C3BB77AE24E
-:100B70000C8EC69DEF105F4DBE7F4F18F1D0B85F51
-:100B8000B59DE736EE54D3DE9194BEE2A57BA9660F
-:100B900050A9437C72FDB874DF12F29F2F6DBFF92C
-:100BA0001D358CEDEDFCCDF0124D235E9F57A3D388
-:100BB00031FFE0BD6183A1EAAD8E1D61C42BEB77EF
-:100BC000B6271FCF7FED7E6FECFF83C2DEFD31CBFA
-:100BD000DD83FCD5D8BE868FB7EF9F5F47FDD2E897
-:100BE00090A3B7F097B2DEE72E66C071EEB273C085
-:100BF00009D9978BF61CBB3BC1C63DB2F74F77278F
-:100C000018FC8BFFDF7B775F8F76D0637E1DF5400E
-:100C1000E30FFE330C9675F3D2005FC7BA76DDFBA7
-:100C2000FD3B997C74BDE8A5F5A3EBD1D787E03BEC
-:100C3000295D0FFCA5C460F5973D7A1EF901963D2C
-:100C400034B9B4AFF513F935E5B5C29522BA1AFB3C
-:100C50001534CE98A12D52077D9ED8A7829FC1F949
-:100C6000F60B5EBA1FD5C8BE2DAF457A2D21BD8CBF
-:100C7000F91B189E97EE5EFD8E3A321BBE13835C05
-:100C800078D90098184690DE5FFDCA17C760EAA6BB
-:100C9000F39546E826BDEA6CD7F81CA3EB59B9E9F1
-:100CA000780C3EF4E0E15FE3EE357CDC7646C7701D
-:100CB0006F3ABE8DBF8CEF4DC76F39E8780C16DFE9
-:100CC000732716EE1B90F53C589E9F2D79E86B7D9F
-:100CD000DA5B522FF487E7050A87EBBC80B92680E0
-:100CE000F2BAF787DFBFB388D3793A434CD79E6314
-:100CF0004380F1C91BEEEECB513F763FEAD571BD83
-:100D00005FF8E8F3246F5D0F3DE331C84E87A0C262
-:100D1000EC8D2EE8F9E940FB63293FAB82C6EDA1DB
-:100D2000B4379CA1D7D2D4850D4698BEBF42DF53BD
-:100D30005C0E96A60E5EA464A1DFC100BFC70DA91C
-:100D400062C2CB92EDBFF540D04E57651CD2F395F1
-:100D5000A9F83D173DE5FC759CFFD916BA6EE7F280
-:100D60009B4B4EBBB67A358C6770D2B94BBC9BD2CD
-:100D700098529ECF4677B90E9EECB9EA01A77C8BBC
-:100D800079F727DFFDCFE7E4F0F5C38061E31B8946
-:100D9000B7231F66D7FBCF0B7DB1149A1A060EED51
-:100DA000BD0E6A6CE339A82203EF118C7364FC76E4
-:100DB000E4076A2AC1BEAF6A7F82F4B7534F2CCDD5
-:100DC0006167BF21C7DB7F7024EAB3238FFF84F8FC
-:100DD00071E9EE573CE8AF796AE7839ECEE119FEF0
-:100DE000C775C1FA7EC691FB0E8E24FD8DFD67A1ED
-:100DF000CF31D17FE3017BFF8DBBDFB1F5BF28D1C0
-:100E0000EE21FF6A3FE3BCA59997E07CDFEA70031F
-:100E1000BE97F456BBDA90CD0E7A29E0B6C553AD35
-:100E20000AD5BD80FE49B5D063A0FE6BB9D17C3E2A
-:100E300081EBE5336EFE8EA566BE80E7D7C9028FD3
-:100E400081FBDE96D0C56058F4789B039F7A913E73
-:100E500009F703FA94D818EBFE4BC25F60BA6CF046
-:100E60002F0B35941A41BE8F33F07D0A2D4AFE694F
-:100E7000353CB581EED5EB2EDD9F75DDE6FDB98302
-:100E800031DA77B975171816FE1A35F9E233D1053C
-:100E9000A78161DB0FAC9BC2CF83E5FCD70D86CD6C
-:100EA000C0F4F03AA5FB30BE439498C6E30BA57D91
-:100EB0000762DF1FC67D7F456F7B0F4CD3407D44AB
-:100EC000EAC8E0E39B96FBCD99F85D305C14C71C43
-:100ED000A54D8006718A13F26194C550DC77B55335
-:100EE0001A64EA0DD373F3B85EF24237E56F6BF81C
-:100EF000039D7394E6C5C6E41563BE50E1F348D381
-:100F00003E4F5EDF77E59597F5A50F608A76C4EAD8
-:100F10004FF2C266DACFA03BF3E30119BCC8383BFD
-:100F2000D9EF3AFF447A1F03E73908DF6BC3C78D57
-:100F30004AF8F9019FB749F96299778C8335F53AF8
-:100F4000B1049368C615F750BCA7D7467E9381D0ED
-:100F50004E693974505AE8D3158DE07B99FC5D2EAB
-:100F6000F8037C9CE780EF04EC78A7FD7D9D6ABECA
-:100F70001867744C8A7DCEFA027B1C523C8FEF13AB
-:100F800096E5B964DC73DCBA6F4BC262C281BF887C
-:100F90003F4B26DB7D372FBE20CFB29F55831D3CB4
-:100FA000AECCB15F3E4FBD81CE455647FA8EE75A73
-:100FB00029E2C27395B715FB666F05829FFBC114CA
-:100FC0001F8FEF36C1D0ADFC88B13D75D67849D3BF
-:100FD000F68E8E1BF950453C2728F5A35CB1340FE3
-:100FE000F98AD1E156C18721E8149D7493FF639B70
-:100FF00027BE0AE71BA96A52F8F7B8C2FD65A68AA0
-:10100000F32D11FDBBF21697C5FB9827CC647C62CB
-:10101000899B592FE8A269A0056A119ECD82FE4ED8
-:10102000FEB4C7BF4ABB2E28725E1187F7E49867EB
-:10103000E97D31AD2848F12FC1312DDF708DC4F924
-:1010400037E9A8578332BE25CAE315E5BEDAF9EEC3
-:101050008BD71117EB16FBF75E71E2623DBE153FB1
-:1010600064B19B9DEBF17D7939DE131A973D1E51DA
-:10107000DA699F94FFE5FE73B1AFE3290242372995
-:101080009E53137E8B4917E9E46F3FBA5BE1EF1182
-:101090003AF8E9E8DEFC91A82F519EF15DF33CF1AE
-:1010A0005DD97DF020DA572D61300B0A49FF192AEE
-:1010B000C3FF2A65944F61E9927DEF3CFD08FAF188
-:1010C0000FA880EFB91D0DCA7350B3008996076B46
-:1010D0006D74FEA4F3EA7D8EC9E5EF6A5DCA5F9088
-:1010E000DABDBB5BA17B622A9C7907BE73D578D839
-:1010F0000D2956FE2EF07EDFDDCCED86F93F7BB06C
-:101100008E49026C14F0E0FA655D67063404C0B0E5
-:10111000F04944AE0B09B303DF7F9E2BF0531C2B29
-:10112000B4D593F3FBD39C86C3E4FF89CF23FB158F
-:10113000DF11B4F60FC23F62B07FC8974E3C1C77F8
-:10114000C53D40EB4A2C3F4D7610DB4FE3FE23A517
-:1011500044116EA73F65E97E85D6B3ABD87A86EF9A
-:101160004B5F9572EC471DEF224BFC3BF9D61D14EB
-:101170007C1B84600E3C47D3FC7C96E4EEEA9FF136
-:10118000B8B4ABF728F48E93DA797A3E10DE55F2D4
-:101190004BBD0E4DB7B31526C3DF0EFC792376BCCD
-:1011A000FB0D3BDEF36AECF80D45ED7874E2397F18
-:1011B0005CA5ADFE2275B187984FE0BB86FD437CF0
-:1011C000333D49F358CAE691367AE373C18175AB72
-:1011D000D05FD22F1E1DF81BE1C0DF313870909711
-:1011E00042CC5742A24FF32ED3D224574E39947893
-:1011F0002AD73B26D1B76888FCD411D1893297B75A
-:101200001BE86BE742551B253994F1C9793DEBEAA0
-:10121000ABF0314BAFB9F0D02B7320B7DCB537FB57
-:10122000A2739950DFD70CD1B9D5785EAE53BA19F5
-:10123000EB9FD5E77A4BE3B921AAD37A22CE4D8E24
-:101240000EE7EF5AB5A7DF2F41FBEFD6DAEE0BD052
-:10125000EE6FBC92C75B7E2FC4D7DF1F8BF4FC9070
-:1012600087F4DD4D311798E82F38A0A614F443E930
-:10127000E6CFCE45BBED80DBA0F54FEF7EFA5FA851
-:101280007CB48EE7CC65AEB651382EAB4FFEFEA3D4
-:10129000075E0D5F61B18FBAF67FF70BB83E6D72D6
-:1012A000C1826CFB80F9413E7E57CD1F4A902D973D
-:1012B000F8BA695FBEBAD3EE67F3ECE37EB8A5FB7C
-:1012C0002F247BF4D03CFE0EE74347F87DD4A9EAF7
-:1012D000AC7F1AC1F2E3FF53E37A15CCE9B34BA814
-:1012E0000AD133E9677866785C8FF19B28177F74A1
-:1012F000A5F0EF1C8CFF227FE769FC8B7812C68A71
-:101300009AF8BBF18F84A71EC674CA0185FC478D6D
-:1013100047F8FA36B6C3EE273A7B0AD30BACFFBACE
-:1013200003DCBF55D7C9CF07CE7EC15E6F7CA73D1A
-:101330003FA11FFE5D1914FBC830949C4C7C6EDAF3
-:101340006DAE0D72BB8AEE9345B5ECFBAF57437C97
-:101350007FC4F041F33FDA0DD1156C1E47E70E9CB8
-:1013600084F7938EBECFCF1B8E7EA83664DB5F6D75
-:101370000D727ED9E4E1E7C79BE6055337B2793CAD
-:101380003E6FE169B8AFFAF3B7E2A7E97DD9254C22
-:1013900045B8684D34F3611CCA470BBFE7066D655D
-:1013A000D9DE51967221E544CA47D9BC403C9B5FC7
-:1013B000B45ACCAF7E5E0DC5E3763DA6D01953D7A7
-:1013C0000A06571F784CC08A41084FE3FEF7C84F02
-:1013D000E13B90DDDF7D3018E67CBB2271E30486C3
-:1013E000AF6F32E14EA03C78DA2AB2F59F80F5E487
-:1013F000BFDA19E4FCDCE5E3FB70D0DACAF0BD88A3
-:10140000AEFD93A7AD6270DEC9E40FD7EF4DEE28B5
-:10141000C19D5802F4EE1F887B85E517C0D69B2C32
-:10142000FBB59F07273D1F64F37C3EC8E39306C4CA
-:10143000A30AC21DFDE87818FB3FFA8197E83750F0
-:10144000F88B64BB7783DC0E5F1D329F217E595081
-:10145000444A311A0F47E78E06386B3FC3779638F8
-:1014600033691715C6990E1C83EF58BAF87918DB43
-:10147000A7E1FEA311E44F828C54297F78D90DEFA8
-:101480008949BDAB1C50D221A63FC7F88269F4CB75
-:10149000142E70E1DB3BCC1EF5F1FE3AEC762B6AA4
-:1014A00060D4BFA80378D03EDF1F497D2CF5784B70
-:1014B00001D77F2DEB34D28F9BB54E3FFAA52B4C35
-:1014C000A35E33E8FD568AB718BC80CB7BDED02DF7
-:1014D000053D76D10480073E52B3FA47CE10FCB4E6
-:1014E0003A14FF0BE27BE4E1EEC7D1BC8AFA61005B
-:1014F000D27BAAB07BC6BFCDF591BC5FD028F625C4
-:101500004E7DB4C92FEC1868FB359EDBFFE48F1AC3
-:10151000DD9FEED13FF3A6D27A0AEAF02790BF26EC
-:10152000FC5C6C0F84FE61BB3DC2CBD9BF88271128
-:101530000EA7BE19074C2F29FDEB1D279D9911DE23
-:1015400093C710BED187999C59DA3BF5D4C0905807
-:1015500067859E3A06134BCF3332FC54BB3CFA846A
-:10156000D7C23F524F65F829457CE81C47015F4FC1
-:101570005E1F8AFAE5172AFA518E4EE27FFFE709CD
-:101580009423468782F753D3901FD61F38DF8F7C72
-:10159000BFF7F0641F8AD5D5117EDF4C3B7851022E
-:1015A00004FB58CF95DDE0338235880F17E141D534
-:1015B00059DE32FEBB6D8AB86F69E45F94E55D6CFD
-:1015C000995E1DE1F7C9F61EAECCE7FBD134D1BD63
-:1015D00087EF85FF42CA85E477277F4B7948B2566B
-:1015E0002E8B1DA12AED62FF68F72324851D91949F
-:1015F000EFCE24CAC83E5C26ECC36470D8CD13D9A4
-:10160000AF2DE97A1DCF3D96852A29BE7A5931C77B
-:101610009F131F326DFC80D98B9638F846AD9BFC2A
-:10162000638D1F786CDF257E73E145E2F71CC4AF44
-:10163000F2C9F17B4EC820FE70E2F9D3CEBFFCEABE
-:101640007159EFF1FDA3CC7F02C41FE9247F2CBFA9
-:101650004F22F94DEA8FBA6B5A937946465FC8FB21
-:101660002052EF48FD72F6E2B627F2B2E80FA7DE8D
-:1016700088BAF52BD632FC459F0CD23B1D4E3DF26D
-:101680003EFE52467EB7BB434C2E1F78EA2D17FA1A
-:101690004D1E7A98CD9D95470F4EE17EC18E133B2E
-:1016A000EF9276ABB4579DF5A4BD2AD71D79DED451
-:1016B000118AEF09317C29FB993C313C2475BE4FDE
-:1016C000FE7930DE8E70E5319803180B5893AEE04A
-:1016D000FB59BBBCE692CF3C87FCB5A7355AFF123D
-:1016E0006CFDAB567AC321C79F1F12EF0930AE4382
-:1016F000BBA6BC0EF8604BF97B01E523218EEB33D2
-:101700005E2BC5793E2DD6995F85F8FA2CD39F07BD
-:10171000633F45F8DD1A24BCB59F1C6EE95FEC08F9
-:10172000994F229E7C0D26CD63900E51B4F7076928
-:10173000ED4A94C151B8D8507A9C3D725D67FD0D59
-:101740009A6E4C42391A84770AB03EDA4759E8F368
-:101750004A88FBC197F83A9F4213BE717A5343B847
-:101760008FF3F5CC3B0851E1E7B2C7811C7DF4F95A
-:10177000C178FEF9BB6FBF17C273ADFFD2BA430881
-:10178000E71B37FC3A84F7217E7703DF7F5CEEB0FE
-:10179000733E10F8BC241C3B8AF3FDD7E68FEA6C3D
-:1017A000EFAF2CE7E73357A554DC94F6F0FBA29D8E
-:1017B00079E4DB93F925ED036C79C9A74BBC3C6E4A
-:1017C000CB39FFB3C2FC1CFDAADD5B3D830C1C3F83
-:1017D000AE84D9F86F083BEE8D7D21F27F4878E624
-:1017E000EC1EE5413CFCD701AF38F7EF7073FC9B72
-:1017F000D3F17C2E2E48E184F3A9C7F2A8BF2B3782
-:10180000A86477CC66632D67FC1D3F7015EDC39D02
-:10181000F3B8F277C6D45246BF2BD72864AF62FD27
-:101820001B183FC497AFA6733CE73C67271CF12306
-:10183000C2AE70C699CC3FC0CFDFE78271F3C48AD5
-:101840002C712707A6D1B9DBFC7EF63D5561B1EFBF
-:10185000A983B3316EFE180CFFF7E146FFFB9E37FC
-:101860009A8182C8DE6AF6517AA459A7F428EA4F11
-:101870003C3FDF7FF029E233ADA30EE57EEFE15779
-:10188000F32E35327AFC4B5BDF7BE22E961F0DDCAC
-:10189000CF23FDEDB304DECF15FA7CBEB017467F33
-:1018A000D0B73E9F85F818D91B5EA9C767E1DF2135
-:1018B000B4E041EA75273EDE3D3C340FF9E3FCB06D
-:1018C000F3BCF9D3E12557BB256AF678462947478B
-:1018D000439CAFE76EBF70D540367EF2D1D7877498
-:1018E000723DF11CEA09C9A7004D1E9463273F4AC7
-:1018F0003EE9E1BB03B7109E247F30B98A8873CEDE
-:1019000008EE0F9DFCD75F7C5397BB7308EA052751
-:101910009F7539EE43CBF4EB61EE7F9F6B9853716B
-:10192000BFCA969B55FC3C90EBA337B4B6A7AE4715
-:1019300079DDCEE565C98FF7FC08F5D0C2FB3784A9
-:10194000510FBDA9B595E0788B77AC0CE3B9FA1BC4
-:101950005A228CEDDF4CA959E31FEF0F2BF2EF75E4
-:10196000DAE224A0357101CAF19F77B8753C076BA4
-:10197000DCE9E5E7EEFB38DE589E9FB7EFCB1E278C
-:10198000B1F0DE0D25068FA7B5C74B6C7793FF022C
-:10199000FD6B384CAEF3E29EF3E7F6BECFD31BF7F8
-:1019A00089389B7DD3B2C64BC8B804271FDFE3E05C
-:1019B0005F861FF2FB25185CE46E17E7E4C95D77CC
-:1019C0008C7C85C17764FBCFC3CA70AB3F9E9FC739
-:1019D000BFDB7EC53D3E576EFEED12FC9EB1275229
-:1019E00059E32716BBD361DC572DDEEAA67DE0E282
-:1019F0003D2AE03B78F0A297D6F3457B9EFCCD399B
-:101A00000CBE450FB88BA6F369509C84A4574F1C9D
-:101A10008BA0CFC2079FE4E7CB86886711745AF486
-:101A2000C0410FC6E538F139B9FDA0A7D311074170
-:101A3000F46A7F652ADD27DC75DC83EBEC9B8F295C
-:101A4000F4F7399DED176C7D328CFA02F144710088
-:101A5000826EB9E396D2173C3C86EA91DFAE3F3AFC
-:101A600036A32C8E257EBFEF6106C78297BC143F3C
-:101A7000B5E0BE6B28CEE875AD89F3FD969525B827
-:101A8000FE2E70274A744AF9F705775F4BFC38FF42
-:101A9000996B4BC47DA432EEEF4994E13CAFDCFC82
-:101AA000359AE73C88133F2ED8A2C6D0CF724C831C
-:101AB0008607B2C8CD17F2B9DCBCBECD8B8FE8C0AB
-:101AC000EBC2CF997856157F3FD2795EC5DF8B394F
-:101AD00026F6DF1F89F5187075B3ECC71AB7AFEE9D
-:101AE000403ABD35D82CD5299E404B08BCD1BBEB24
-:101AF000EA33E7950AFD46EFDC483B68327EC7FAD9
-:101B00001D6E7AEFC6D2CEF65ECD32313E833BA05B
-:101B10009CC5D292EC7ED099F9522F88F81BC967E8
-:101B2000B9F4C0761ECFF2FE735CCF605C0E957781
-:101B3000B8D3A5B6781CAFEDDE7526CEC42DE4DC97
-:101B40005ECEE0A478991EFC3EA6A4F0FD63C92FEA
-:101B5000F3D67BEDF1793DFCE37CAFC71E3F33DF6D
-:101B60006197C9B4D7FA9FEF38AFDB7C62F1338B52
-:101B7000DD298A7F5AFCA297F6278BF7B8638897EE
-:101B80003FED7EE2379732BEFF53BB9463BBDE75F9
-:101B9000CAF182BD63219B1CFF291885AC72CCBEA3
-:101BA0006795E360E65CC38053AF77E7E7D0BB1788
-:101BB00038F0C9EC867C8C237EEB078B4E237F8527
-:101BC00003BF52DF3AF5E86B6183F0DC3BDE8FAF99
-:101BD000FB99784C8E47C99F0B7FB884C6E9E163B7
-:101BE000C9A7928F73C48D39F1E92C2F44DFD9D85E
-:101BF000DE7E91443DD4E0DF674A7A80BFF3E60A97
-:101C000044917FFB3BEF7C36BF42BEFB7616DF176D
-:101C1000F2F3CE6850C7BF5401EE2243CD76CE1EFC
-:101C20009DECCA6AFF27F2F9B9463EFA2318DE1E78
-:101C3000CE37F8BD0735261C79ED748F81CE56114D
-:101C4000CE8230C9995BC4A9B09EE93E7A34CFF503
-:101C50009EC1FAD892FFD4F91AA36F74B4EB9AA17B
-:101C60002CFF50FE4BE76BE8AF9DE07AB092E57F2A
-:101C70009CFF5B9E3FCB35DACD587527BC7CFE14AC
-:101C8000567FA998F752E92769196BF39368AE5705
-:101C90006EC7F31CED61372459FE6626F7BEDACC19
-:101CA00039739E17127E96CFF3B094E55755FC7AA0
-:101CB000156E229F0EC4EFCA277CD51B88E723BA76
-:101CC0008FE27796FDE43C8A237D389FC7BD9FF95C
-:101CD000E004FAFB8EA7108EDDF9C5B9E16871F357
-:101CE0007E8EEC3D7332E2F9CCD3D0A796A147ADFE
-:101CF00066D0773F437B82DBFD11BCDF922CF05036
-:101D00003F0FE74BFA9D582AE35ED43CCE176ABEDC
-:101D1000ABE901961E14FCF0B8C00BFEE0BEFBE878
-:101D2000A3A5DBF8BB56DD4390DEAAFAEEEFD1DEC9
-:101D3000ECBE2C8FFE7EC84B018EB797021C6F97AE
-:101D4000E4AF759FC1BED7FA865C834CFF92B2FBAD
-:101D50005A4CB7EBF15F723C401AFBBDF47295F739
-:101D60001B6C0AE17B718AC9ED708531D32C868F9B
-:101D7000A4098667288AB03DFE43556BBBD3347EE9
-:101D8000C8363E94B37593C9F925E339BD186E6919
-:101D90001D7D7E1CCF4BF866A62A939D06C1F37B62
-:101DA000E48F51DED460DC4F5DCACC2AC8F25E7885
-:101DB00057809F6F7661FB9199F881C6FF76D17E3F
-:101DC000B611E7C0F20F1E01F1770AF9BB3BD2EF63
-:101DD00031FE975793FF7BCCFE453CCE44F8BBE4E5
-:101DE000797EDD217E3EE7F46F4D80B5A44FC73B81
-:101DF000F4E884FDFF44FAB5BFF3B9BF48BD3A101B
-:101E0000069EE4F91CE896F3B9FF01DBE0C6DF00AB
-:101E1000800000001F8B080000000000000BB55A76
-:101E20007B7054559AFF6EDF7E25DDE9F48B100838
-:101E3000869B0448421E36498010706CDE4C8C1222
-:101E400060406418695021E6D56CD6416A748B0EE7
-:101E500041459DB2326A29556BCD5E18DC45496615
-:101E60001B4934BA9D4C0710120437082830AE665F
-:101E7000DC1D44973C645670D42AF6FBCE39977E1D
-:101E80002428F3C790A24E9F7BCF3DF73BBFEFF7CF
-:101E9000BDCEB91E3D7883F900D7E9DF9D91B62A02
-:101EA0005902980EF44F0729000D66FCA5005C3915
-:101EB00091990C385EAF07909D004645865267E4C5
-:101EC000B9B66D38CE14E9BF93ACB0790ACED81F3D
-:101ED000001BB5B00E0AA3E6B5F37917CA568012F7
-:101EE0009CFF12A8A60C8069FD392FCFC1BEA1C7E7
-:101EF000002ABD979EA0FBE7746A00459BD1FBBBFF
-:101F0000E2305EDA91602B84DBF195A93A50CC6C1B
-:101F10005EB88EFF1394445072227D4B8E33A62FF1
-:101F200027DAF64032FE0878FB52518E627E0B9221
-:101F30003CE363E679C7B6A487E42EB66FAC20B95C
-:101F4000934B3363E68113FACFFAB19F837FD73384
-:101F500069A995C96194BF082ABD12CAEBF9183C5A
-:101F600061947FC6193E4E7BCE130EC83EC4B1F4B9
-:101F7000E3D8EB6510D5C779B67EFC95E348943C71
-:101F8000A5F624F7C53CFC311EC65F9747C5D113A3
-:101F9000269CCEC81E540334F4E22037B65F800A74
-:101FA00088DB34284C0686AB0C2AF6DF04DF0B7383
-:101FB000B0BDB66DD8716472044F8737164FD79293
-:101FC000583CC754C6E23976752C6EE37CB138A50F
-:101FD000554D8DB97FDBE6A298FEC4AD6531E33384
-:101FE00002F362FA593BCB63C64F6E5E1ED3CFDE5F
-:101FF000B526667CAEBA21E67EDEBEEA5BD27F41C4
-:10200000B021665CBCFE6FEFF855CCBC65F25A1986
-:1020100032233C08E01FF1A088544CFA473D84610C
-:10202000A4FE67BA03C4F8BF59FF5B49FF9628FDB9
-:10203000CB6B937DD691F6ABB59A5EFF89D63A9D70
-:10204000F48A73A070D748CF786DC860DD2961EB42
-:1020500040EEACC5EB5BCDFCFAA3029F6B09E92A0D
-:10206000ADDF113AF657095B540BB3C3C02716B561
-:102070000979F3A8AC3412AF5E942B254079D25085
-:1020800075BA2CE4910EAAC8AF3CA7D3ADAB8C9225
-:10209000EF793B0E1E43AD8EB5FF6C445BC5F7A6D2
-:1020A0005920602E62CFD1DAE89F1770DD36170312
-:1020B00005FF55EC5C3001EF3BFA731407E02DECA3
-:1020C000DF06702191CB7B2191CBB9C6A434F59367
-:1020D000FF90D5C924CF5EBBEF5FECF89E0BD2E337
-:1020E000067C3318DC0103D95D9A1902367C5F93B4
-:1020F00001D65562DF016EA901DB6478C54EF68515
-:102100006228D7911487ABF392FBF1FAFB24C23813
-:10211000B2318F0E6600DCA7F9C3AA5CE60FAFE010
-:102120001AFB48A17A2519B0BDF26016BB7EFE7E6F
-:10213000B442B4A7F3468E8786C325E127BFDC6689
-:1021400066EDE56DF618BF59B5FB852405E7399FA7
-:10215000034B8251F8750BFCBAED32D3E7A0FAE7D6
-:10216000148267E8A1EFA690D07EA9EF492B0E79E3
-:102170006AD73F5402EAC1D8B62C803A815F18155D
-:10218000365E9BC71F9A0B84033196E6BBF723D8B4
-:102190004CF2DDFB1DB651EFEBB31BD8737DE27D36
-:1021A000ABB0B1236EAB502F0E6A8FCD5944768100
-:1021B000D7C312F697F68081EC61992FC340F29C49
-:1021C00006CFD97694E78F76FEFE9F41A581E4FA8B
-:1021D000F0FEBA241A77633E6D1E14D681F1E42313
-:1021E00047C090827E6BF80EC9B34761EF33D3F5D9
-:1021F000CAB5694F5895C8FB3E04DFC059D4F77281
-:10220000F0B079B5F9D1F262FCE21B55359FBA32D4
-:10221000C91FEAC04CFEB0D3C4FCE150F5B5D69757
-:10222000F0FEBAB4FEDB8CF8DC85EAEFA6102EF7E0
-:10223000ED924141FDFF39C9F739F147C3E3FC8312
-:102240007F49A2FB6B4CEAAB2FA11DC07E93E755E3
-:10225000A0E7F6B3E7B4715FD9E75EB653FC2C454F
-:10226000A066DDDC3E35FCE7BF9E3B9678A6F1EB31
-:1022700061C1AF86D7B2C7129F1A926EF08BF75F1B
-:10228000CD1A4BFC9A21715EC6CFDB85FC52B27130
-:10229000DDC82B0579D5F5CD3C17F98983279CC579
-:1022A00024A71E7C3A47141F0EBEBF268FEEC339EB
-:1022B000F72DC94BB6194039EF052EE749611FAB21
-:1022C00043AE62D23BDA9DCD81E3D6FCC76B037F80
-:1022D000247C3AF7BFFA188D29B9353C34FF7420B5
-:1022E00091C7231071CE2370C13897A3475187201F
-:1022F000D143F9C2CDFCD601F20BC8AB6B3A747C6A
-:1023000059E4AF2A81FC82053C0AB5E865DE9B8D65
-:102310007A6CEAD6C133D8B59153D3FC4F29F66510
-:102320009DF03FE035A7621C11FE29E737EA921DB8
-:10233000CC7EBCD6F533984B6472951CA9AEA0F741
-:10234000421FFA7194B512FF281ECC86CD87135018
-:10235000CE19BB303FC07133CFF1FB9A5F9F15D6CA
-:10236000AD3726D3B85F7F25DB08A2D83830FB48CD
-:10237000F9E734EF6C887A6E94F830C711971FDC58
-:10238000627C584C0100710FE670FF1E0C27AA8179
-:102390000C366D716501BA26B43DBAFFEF6E1E476B
-:1023A0008CD2608E19FDF05DBFD9B373E71CA4C356
-:1023B000248E0BF59BF4844531E3F18DBCF1C854B8
-:1023C000E60FE17B948AF0B20B99E3E42941BBE389
-:1023D000C1D8139377868F7E6BEBC775B43A95FFA0
-:1023E000247D0D635E437E2141DF6F748CB2BE3766
-:1023F000C9BF22FF9F77E898BCE60EC9ABE2FBCDD0
-:102400008A17245C4382DD3E4D9622E3173A78BE5C
-:102410005B77F442BA11F535A03B61CBC7F96BDBB2
-:10242000DFB0E1F2618BCD57457CAE39FFC10C0ABC
-:102430005D00BBD32B9308A7CC64B2A7023D04F484
-:102440004523E5F0EFC2C520E5EB77B9589BDB21CA
-:10245000B1F5F9C37C9D831D4DCE68BF71E3B93FD3
-:10246000748E27BDED1F03ABC91F17848A37118FE8
-:10247000491603EAE2F56FF2D87CDB1C194C2FF801
-:102480007E3D5D075075CB71D07E033E87F30E7E97
-:1024900023B371DABC051D73653BF2283FDC7C88F1
-:1024A000F2C2849049213D27EC058E4B2881F945E5
-:1024B0007FD762A0FC75C8011E09EFB7260E7F42C8
-:1024C000BC18EE34297B24C2AF199C387FAB91C76E
-:1024D000CF5C348437AC91EBDAFB12422F03F92B3B
-:1024E000E48757A5FBFA66B8C31A8D7B12C35D75E6
-:1024F000705EB526867556F2FBC8C93D4CAE889C09
-:10250000C0DEABC999CBEA8056E3F0C5C7DC4C2EE0
-:102510003BF12117B89C10CA565EA5E7ED5EB68E5A
-:1025200004BBE2094823E5F217625E8C76F7DC769D
-:10253000B861E764F7FEC448DF8C36D19AC9F90D5B
-:1025400081B33B17CC89EA93C32A8D3CDFEE38B7C1
-:1025500073C704561F0564E48305DB2427AD93C7C6
-:102560003F340DEF98228E830771B298F9FD1BE37B
-:1025700091EF56EA5BF9384FB2DD522E31BB01B212
-:102580009B7AE1671E91C217EF44D57E1D3E54A889
-:10259000A02CB5C7DE61BCADD1855E2A20FF98E8CE
-:1025A000FB03F9F7B73ED6810DD7FFE56B096A0546
-:1025B000E291F3F6EE14AF75E47C4F9DDBFE7C1ADE
-:1025C000E9FB6D4941A4312F1C4E27F9EA439F1BBB
-:1025D000BDD82EEEF89391E2D32F9CBE5EB283D28B
-:1025E0008EC6F984DF2C686EB25B995FF4114F835D
-:1025F000A9DC7F5C3933654F6314DE43C2BE60D80B
-:102600003791EC2624ECB38BF21F6CDB451ED6DE33
-:102610007D5F965210792E0087D200E7DC0E47D2FC
-:1026200008E71BF3A9FA25C4A7BC0FCDEBBC517C6E
-:10263000FB42D8FB17E27D01A7EF53C2A1A6FB33F3
-:10264000A30DD7E5FF9F603AC5A720E669F61FF006
-:102650008BFE38BBF1EB878D34DE7F09981F41BDBF
-:10266000EE48463DEDFFB063EA7A2B931F9271DD91
-:10267000EDE74DCC6FB66770FB6B3C7BB590FCD63D
-:10268000D5CE9A8984D7298741E3F9BC44B2A70300
-:10269000C0FC98668FF9648F287A3EF1BC84FAB941
-:1026A0006CBE56635F39B3BF761D90FD21CF19EF25
-:1026B00091E776CA3FF2EDC87BF67C36B3E7D63EAB
-:1026C0000C78D80FA01F9FCCFAF35650BFB56F817E
-:1026D0009DD9B30EA12D22BB0C1F62F304B1A6221B
-:1026E000D54950199DA72E74D898BC9A7F5C21ECCF
-:1026F0003498A3247B703D16598EB183A878C9FB0A
-:10270000229EAE759A9E7E71025993880B222FEB02
-:10271000127930F88A99BFFF4711CB1ADE2D5BDAA8
-:1027200082EB6D382973FF2F787248E4C947B6A54C
-:10273000B23EC50B05F5341D5B2FFAD319DECDF380
-:1027400029FC942E693E4C6D596570BE81E2E2EA27
-:10275000BEC3066ECE79C4BFB6433FCDD313DFCF21
-:102760009B2001456CFB76F893D711872D5D88FF80
-:1027700028710997C3F887119DF1F166BC1992FA87
-:10278000EF99EDC1FACF39EEA7FA04B41F2206E2A1
-:1027900071BB73ECD30114A8C3E92D72227E9FB8DC
-:1027A0007CAC1D3AF56D0AF9F4F6339FD9C8DFB752
-:1027B00019BD79C4B3B64CAC1746E1E744A781F91B
-:1027C000FB12536C9EAEB52B9DBCAE9A12806789EE
-:1027D0003FF56DB25D457D0FB4C95E23E65117BD6F
-:1027E000BE143D427A0902AB66537C17F5EF431CD9
-:1027F000767888F2178C331B5F34C4D4A5B5625F3A
-:10280000231BFA9F4C439CFC7B2556D756C5E523DA
-:10281000B594BF14527DB1DB48EBA9DE1B370FE541
-:10282000318534EE87EBDC954E91C7644116E53176
-:10283000C823564F0F9F953D7B2806EAA1C784FC0D
-:10284000DDAFE338A1DF64F6A8E533896EEF22B28D
-:10285000FB450E9EB7B48ABA75B8555299FDEC4344
-:102860003F8FFDB24BCA6EE0389C499D41EBE1BC05
-:102870002CD3F3F165A10C667FA55EACE771DD1B7F
-:10288000B19E5769DD5A9EA71AD8FA31FCB23C6F47
-:1028900016A84D361CB7699FC4F67D6AF61962F218
-:1028A0003CBFC0A776D7A9A3544ED605E3EE0B7C58
-:1028B000FC71F8BC413F668DC4E9574EB11F900EC4
-:1028C000E9D1F91EF43847AD0B347CB43CFB7F0DE5
-:1028D0003CBFF840CCAF8DDBE5E47EB4DE0B6CFF93
-:1028E000A856955595E783D6F5C89707045F1E103F
-:1028F0007CF1031F57B74F52C314AF7ECDF56EC6A0
-:102900003FC2E5A1E0FA4569CA485E550B3CAA5AA8
-:102910000C2CFF05D86C24FBAC7A256E9CC0A53A24
-:102920000E977A9F14271FCFC7FF56F96A0C7CBFFA
-:10293000A606F91550FE7EF2C6EBEF0D8DE753614A
-:102940006A8CFE96B86E497FF179F281A3532DF41B
-:10295000FC959E4CB60FA1F1267E9E4522CF5EBC13
-:102960008BE7A3031DF32D05544F9DD07B249CA71B
-:10297000F8E4FFD90A108FA24E192A708AA150F1EB
-:10298000B3015CE7C19E492B148C0F4527F52CBE83
-:10299000149F2C52A9AE293A5964C94A62C6E3A2CF
-:1029A0007A01E761F179E8C4A4D3F9E4677B16946E
-:1029B00010EC8D278A2C94471C04BEAF219D2C71EE
-:1029C000F547C59BF79C325BD793A9FFFD1CE5F942
-:1029D0008B0F183C948F2C360CBF3FDB4DEFD77B11
-:1029E0001AB15F7B72C3F604D2FB6B9287D2F1A35C
-:1029F0007D0DEE9F937E4306BB89C9FBCB43743F9D
-:102A0000D0227926E3787FE7C2BC56EC17ED2EF68C
-:102A100010CCDAFB8A1CCA0B15942F8EB3B03A7E09
-:102A2000F16D0616772F8FB7FC8EF2A56AEFEE4593
-:102A3000E48F2FBF73D048FE60A85582545CC8D184
-:102A4000D4C3BF0FE03A2FBF79CA4849F9FCB65347
-:102A5000C6FE1FC827065419C2AC7E6F36521D54DD
-:102A6000B75BEBF71B494F9522BFAADFFB27D6AF19
-:102A7000A63A01DF57FD8AAC2AF8F370E75B46C23D
-:102A8000BBBE4582B11951F7F74AECBEC6FB0DC07B
-:102A900079B041F8A71AB10F5943FB90781D7672AF
-:102AA0007FA3F1FEC17DCB8E52F87EA839D60F3DB3
-:102AB0002C78BE89EA52567FFB8CA4D74DBBE2C668
-:102AC000099E3FFC233C4F76093F950BB9C4F3ABFD
-:102AD00073793CB97A2AD1928FEBBADA2B7B007EDC
-:102AE00090EF2CFE9E10F9C295B08EC5336DDC6060
-:102AF000C75F58BCF19FB862A4FC7651E82BA68F43
-:102B00008A50F702C2FB6EF0D5127E77872C76B220
-:102B1000FF8A7EEE0FCA432695F6C1EF86E00ED2FD
-:102B2000F350D7BFED70126FFE95F30684BFDB2420
-:102B300070DD2470DD840EDF852EB63ABFFB252CB8
-:102B400007A01CB81F2A0F0A3FF44A2CCE1879EEB2
-:102B5000277DD5874CF00CDEBF4BF8A3BB5AB83F9E
-:102B60008A8F93F5621F60685CDE52B6DF8AF52EAD
-:102B7000E571B52DB1F8D78B7D81FAB8389CE9E2C3
-:102B800079C28FD5FFF17A5A10A7A78A61CE9F72BA
-:102B90008A7BB8FE9EF0F67CDAB7D3F08AD7538FE3
-:102BA00092953C5A3DABB5EF8BBC5FEB2F057EFE9B
-:102BB00014B4375BA3EBF8D75D3CFE54CF9203A46B
-:102BC000E71BF5CEA4C3858A2E52EF609DB3D635A0
-:102BD0009DD73DD370EA63136470BB23F5CE53A930
-:102BE0002F541451BED2C2FDC86029CE974CF93C77
-:102BF00030FFE56F31A954A7F8913FACCE21DE60DC
-:102C00005B199216126FB07EA872218ECB68EB18FA
-:102C10007158D6C1F39E650BBE627CEB9DC4D77B19
-:102C200045AF8C1DAD9ED0EA88FA6F789EAA5DAF45
-:102C300047BBA7F1F52189D5C56D87FE9A9E81FE18
-:102C400073A8F35AFA7A6C5F76F13C4ECB53873116
-:102C50004FCD14790AE5CF1BB9CA6013A6C35B91A7
-:102C6000871B459C036907B3937A4A76896FED12F7
-:102C7000DFC7791B2FCC44FFFB4122CB63063FE427
-:102C8000E743F4FCE398470D6E081E71E2F8ABAD24
-:102C9000128B7F1B31C7FD49D1487BAF13BC6C84BD
-:102CA000EDA22EDBC1DAF29C039F3D46FEA8C5AC27
-:102CB000907F1DEC6832B2FD6535EAF9CC91F95090
-:102CC0009DE06FDD8FEC6BBD1EC74B5C07CB6F8744
-:102CD0007A65BB4962F8FD767C344E22FF693B94ED
-:102CE000C0F43C74CAAA529EFFA5E0DF65B1EFDED6
-:102CF000582A335C74B3789BD7F55626E995F4E0EF
-:102D0000A37D94AEB7A67AD93E9FCAF858B34FA612
-:102D1000C3BE88FC410BDB0BD5FA1ABE7E812FCADD
-:102D200035C5E88EC8D5AEEFB77946B11B493AC470
-:102D3000F4A69362EB5CFFDB72A51A654FB89E7533
-:102D4000E4DF42821FA01F4E21BF1C76294CBEC665
-:102D500010D7B3AE93B7F8FE557CDFC6C0DE3FE2B6
-:102D6000FEBC402DDDBF9A6101C6936F0215D4DF12
-:102D70009229333FB5E583EA6C887A3F48BC1EF759
-:102D80001B8653583D7C4AC7E4F39FBA9232C94A26
-:102D90007E70F7027B3EF937EE1F8E665AAA88DFF7
-:102DA000017AEFD8C83CE52E7E9E00B4DE54CA6698
-:102DB0005EE4F38AF56E87E50C87ED8267DD221FFE
-:102DC000C5BAE93CD9637CDD74B37C37AA7E6378ED
-:102DD0005D9DAB9CFE39F2A0A8571FA07AFDE0399B
-:102DE000EE271A3B377D4A75B0FF8209C84F6CE960
-:102DF000DA944D71187CBEDB29BFBBDAF5F0ED6CBF
-:102E0000FF52DACEE40A907CA994379D4DA17CA8AC
-:102E1000AEF36C0A8BEBEDD35FA03C09F3A2BBE8E9
-:102E20003AE62B8C7F45274B18FF0E9E2871659143
-:102E3000E0E0B1D0BC75BDFA4AC2A7AEB7E4BD0AA6
-:102E4000CA5F4ECE637992961715533D4E7952EF75
-:102E5000A4983C69D8C5F3A4A1EE04B6FF2141268D
-:102E6000E70F4C8AE14F6DDBBB2C9FA8ED90BDD1E5
-:102E70003CD29ED3BBF57C7FD42DF81394BC8C1F21
-:102E800007785BDB7190ADAFC61064FA6E6C31F001
-:102E9000FBADBC0568E6FB2CE00C101EEFD125D481
-:102EA00043B9519D40FBEBC733787D11AF8F67DD90
-:102EB000FC1CEBF879DF44E2CBF1B9BE6CFB287166
-:102EC0002300F378DD2D09BCDB0C2CAF8C1FF7B48D
-:102ED0009BEF4FD85C1073DEA8B5BF7473FE941BD4
-:102EE000F93E55FCFDB96E614F289A0E7971BAC250
-:102EF000607F46D413E3D0DFDE23FCED8ABB0D2CCC
-:102F0000EF382DCE99EED1FC6E298FDFDA7EFFB23D
-:102F100057E0092CFFE16BC867E760CBBCB17E6F5F
-:102F2000A5C8AF562C89BB2EF2A9953F924FCD7202
-:102F30008BBA610A4CE17583D542FBA25FF718ECAE
-:102F400032935B9D545930729D9ABF392ACE877A4D
-:102F5000D00F52DB98FB11DBA73ADE7DFEF70EE6C1
-:102F600047132093EF3BB2FDFABA9BECD737DEB0A4
-:102F7000D39FC5F04ED3D300E5F9F923F5B452E061
-:102F80005D67BE6C64E796B079A74E8E9C539A0C31
-:102F90003E6F1AAEC3D031374CE7978DB926962FC6
-:102FA0000D2C9454F2F72867BA29CADF0F8CE3F985
-:102FB000D7965512DB17EECEFD88C5F1BA709F91FA
-:102FC0007835A56DFD13CC7E037086EA254D9F4BA9
-:102FD000CD3C7EDED0A3B65EBAA9D0FA9C01EE97B6
-:102FE000DDACA5F1142FEF11F1716969ACFEB2A14E
-:102FF0006F11ED8FDCEB9558BE7433BD2F5F3DED47
-:103000005DA2DBADEABFD9EDDBEAA6FDA2BE2BAB2C
-:10301000687FF778EEE7E9145FEB6FC2E726C177C8
-:10302000BF859F8BF92DFC3CCC93AD34F5233E2618
-:10303000876FBB9BFC87EE7BDB54A079FA7FDB209C
-:10304000917E80E9E56676F4B498F769B79DFB6FE9
-:10305000373F1FB2529FECD9A04E203F01F9B776FF
-:10306000CED7F8F6B142D2D360776FA1314A9F979D
-:103070001BD01F507CE93C9CA258A3F9A6137CD31B
-:10308000B35692968BB819CBBFCBC43FD2FF81C346
-:10309000F7505D38D0B6C22D295171B5FDB46D72AF
-:1030A000D4BC0321998DC77A6CCACAA468399F60C1
-:1030B000720E04F97C00FD53561444DF6F123CEE8F
-:1030C000673C7E2A67333B77D778AC07CEE3FA8E2E
-:1030D00065C0E2945877D0883FA8CEE832A9744EF4
-:1030E00041FBED8E283B392EEC63261607C4CF59E1
-:1030F000109069DE9938E35AEAEB21AC77D2796017
-:1031000058E6E7DD1380783D43F07AA63EDC2D15C6
-:10311000B271EC5CAA0CFAD8B89FC0306BBD60D716
-:10312000533B0F3CAC2D3587EF2277921F0CB2EF4B
-:1031300092C2297AC745333B2A85D1F41759BF1E5D
-:103140002E6A3CC5C198F4B07DFCF8715F0B7FEF2F
-:10315000A11C8EF43C006C1FEE0EE897E925B3F538
-:10316000B084BE27BB430FE64494F7C0111DB3E7FC
-:10317000AE7E45257FE67189E7BEC0E7B03FD3CB81
-:10318000ED9642107DB7A2AD371E87329C8FF605B3
-:1031900067EAB1F2653886D9FBEE24C171DD73416F
-:1031A000D153FF923B437CEFC6EBB4F9A24ED399C7
-:1031B000030C8F418A8F63F8798E0DE7296B96E0B7
-:1031C0001C9DCF64F1F56AF39761284DA67C5AAC3B
-:1031D00097B6C2CF39F9398F8D9DCF2DB0135E527E
-:1031E000384577DD72EBB80EA50093DBF6C0F0E052
-:1031F000632591F32E4FE8D839FA2E47F27AD97722
-:103200003D1EB3354CF939B2E37274DEAD1BB30128
-:10321000C6E0FA24C5CEF0021F28947F8C8D7CEF87
-:1032200002D75D91EF6908C64B2991F37DEDFB9ABA
-:103230007DEA7245877A59ED367B482F45E6F46280
-:10324000AA07F7DA7D30867D67D332994DA657A756
-:10325000572645F86E016F29E1AD9DEB4B427F3754
-:103260003BB7275B259E5BD0EDD37741CFA2BD98BE
-:103270009DA37D7FC4CFF3D10A15FAEE081E9FAF40
-:10328000D077014F3ACC9E67C8CFD1FA2C91F53553
-:1032900099F9F7044D66FE5D00EC98CEF6CF1E114D
-:1032A000E7114D565D0ED55B4D90E8A1925E93F708
-:1032B0009124CEC747FECBC2CE47E3E5FE3ED19771
-:1032C0004FF86AF23F2A7BCE61EE1383E71C0D4F65
-:1032D0005D04CFD56A6653BFC2F02BA1E7A799D48E
-:1032E000DB685F648D897FBFA4E1860A65A4B60BA5
-:1032F0007D68F8D949DFB40E2FEA5BE34B6604BF63
-:103300006713396E06FA72228B3DABB0F3FC385C62
-:1033100034DEFD3FD45368B1102A000000000000E5
-:1033200000000000000000001F8B080000000000EB
-:10333000000B7BCFCFC0F0A31E81FDD1F8E8389100
-:103340000F534C94118257B3E0D78B0D5B3122D8C9
-:103350009EDC0C0CB29C0C0C7240DC01C49D40FC49
-:103360001288B5B81818B4813801C84E04624B20D1
-:1033700076E086E8A96567606805E25E209ECA4E31
-:10338000BAFDBF2518181A6411FC0B4036AF02E9CC
-:10339000E68CE2A1897F1BA2F245B451F9F6BAC0CE
-:1033A000F46184E08B6A9366FE36A0DEED46B8E5F4
-:1033B00079CC51F9CC96A8FC6E3354BEAA3B840656
-:1033C000009B2185B9B80300000000000000000048
-:1033D0001F8B080000000000000BC57D0B7C54D53E
-:1033E00099F8B977EEDC794F260FC20021B9794000
-:1033F00002267188E1A5A013040B886CC017B4AE37
-:103400000EE111DE44B49AAEB8B99010420861B42E
-:10341000A8C18D3841405468830D4A57AB03524BC5
-:103420006DB71B1505772D0D688358A0298A4CFFB1
-:103430006BEBFF7CDF393773EF6426E0BAFFFDA743
-:10344000BF7A38F79C7BEE39DFF79DEF7DCEC8243D
-:1034500087A4DD44C837F0474BBF891032205A9209
-:103460007255206308F9A195E09FD62FB6ACAB2129
-:10347000246C2124B290904E27ED28555949212DD6
-:10348000EF982E92744292E07D85907AA1EA686E60
-:103490002921EA5091ECA28F3664CC4E0A38138F62
-:1034A000BB978FFB931A2B96ED351E2C5FAEF16206
-:1034B000D951A390703E21AFD4146079B0C687CFA4
-:1034C000FFB5661C96AFD7F8B17CA3662A96E19A41
-:1034D000722C0FD7CCC1F2484D00DF7BBB66319612
-:1034E000476BAAF0F93B35D558FEB646C5E7BFABEA
-:1034F00069C0B2B32688E57B352D581EAB0961BF84
-:103500000F6BF66079A2A61D9FFF47CD412C3FAE01
-:1035100009637937494678DE79E725EB3CBADEFC6A
-:10352000671E7C6F5A1A215B468B3E0057FE339F05
-:103530007A0385D1756FF99B694E7B1CB8DC450415
-:103540001C678B8B60FB96431F11A58890E6D15DAD
-:103550005E95D6A7F1EF8CD875CC3AAF30DA2F76DE
-:103560009C3F12131BC74CDB69BFE1DB587FAD7D6D
-:103570001A7C6774B47D77CB7BD6F94E7D3B7BFF9D
-:10358000F9D6F7AC80BFCD11898411EF2A21B4B4EC
-:103590002B3D2D03289E6D272CC4924DF1AFB49383
-:1035A0002E3A4EF3F827C36229AC9B7653609DEF09
-:1035B0001381C2417511A40705C6181BFDCE582200
-:1035C000E23CF29F39C6BE73C7252CDFF8AB4C082E
-:1035D0007DAFF94E21E4A0E3374FBCE8F503BDA968
-:1035E0002F9880DE905C15F84F97B79C8EBD65E2F2
-:1035F000875E95C269F3DFDE9F331FE86F14F1C168
-:10360000F7361FFA3951A0BDA807E157CBD7BD79CE
-:10361000EEBC2C4F6162BAA49444C47174B94EE2FA
-:103620000FC581EF3F0210287C4C9E10AEC94EFBA7
-:10363000C5C3C33F1219FB6D76957F007051EF34FF
-:10364000FB76D179DFEC0B936E6774DE50FF84D686
-:103650009D5F8689C905F33EEB35D1F53BC6C9D7D9
-:10366000D9E86C9C3D3D27E07DE784457E587BF39F
-:10367000A82EEF22DADF5AD089EB253EE21B46C79F
-:10368000B517A8647E21C0C184788D9DCF7C80F75A
-:1036900000C0D3575EC08946871FDCF1BEB542D754
-:1036A000FF798D3E04465FA4296C9DE58AB63FA351
-:1036B000B5DB18FD10ABB17D5B0C1D938C04ED6682
-:1036C0000A68C49718DA2520DCADB38BFACEBB2983
-:1036D000FC6BDC074E5FD81A88B32EBA4FACC077AC
-:1036E000924A451FC0AB7922DD2F85D1755E69DF17
-:1036F0003570B86C2E9DED82F1AFC4B78ADA4512F1
-:103700002EE03C93FEFFDA83763AF3687D5438C5A9
-:1037100050BFEEE86043FFD19D3986F6B127461AC7
-:10372000DAC7779518EA377C76BDA1FFC49E498633
-:10373000FA4D91E986FE65E47643FD66EB0F0CFDDC
-:10374000A778E61BDABFE75D66689FA63C60A8DF46
-:103750005AF088A1FF6DBE5A43FB3F8CDB64689F23
-:10376000E5FFB1A17EFBD47F31F4BFB3FC3943FB4D
-:10377000DD735E32B4CF0DFCCC50AFB4074E027E89
-:103780007EB0F835C37BFF58F596A1FE012153E3C7
-:10379000E197088CCF500AF2745FC3FB5316E70120
-:1037A0009A033A1EC0E8B4A02D019FE4ED2FEC7CF3
-:1037B000CFBAD0C027CD8C8E07B1F63DA1F7E2BFBE
-:1037C0003F94EF13D2699DEDD2B7B3795DF357CA39
-:1037D0005FA15D52BF157F75797CD85FE3AB94BE66
-:1037E00009B99EC2571DA2AAF83D3A1EE59726B612
-:1037F00064524D189F22E4017CAEC97D9241C226DD
-:103800003A6EAD2BA3AD116042C796D2A05EB8034D
-:10381000EAA2E2275D71E06AF2C8063CC5C29738A9
-:10382000532831F7C76755849F3A851448F07DC106
-:10383000EE5B4BD72B91C060813EBF2C06BC30F9AC
-:10384000874DEAAF02D9D1FE6B27D27F42FF5342A8
-:10385000681DF657108EB545C40F72431D24877638
-:1038600065233C2DC04FB4F7E803A58BCD57FD264B
-:10387000D75067F3BD62FDEB7C635D1BF79F8CF057
-:10388000A47086FA7DBCD267DD3E394AB726E8C708
-:10389000EA8A28906F900F1ADBB5EF5CB6B98B49B6
-:1038A00012C5A395950FDBDD3BA0BC6CCB0C11378B
-:1038B00021C562609240E1A04E62F0514F3A42B59C
-:1038C000385ED5D8F222806F7C7D8190756C7F7CCC
-:1038D0003C4DD4AF2311DE3682DE961FADDB32289D
-:1038E0005DC5E1CB77094CFE511A95605C0B61B464
-:1038F000E53005EE8279CAA4DC2F225E7D04E677EE
-:1039000068D893732A28FE9A26C83EEC1BA40A277F
-:10391000D54FA55EB84EC5BA95D7E7090A8EBF3117
-:10392000F9B03587AE77B34FE47A4110C76BC8FE64
-:10393000CA0B7CDC26058907CABCF8727AA52072FE
-:103940003C3E4AAE461F8EC5CF48FA3AE32F04E10B
-:10395000A7CD6FCBD0B03507E8713CD3879BC7F5B7
-:103960002F57D673B8D6727D78B3323B8938A3EB24
-:103970009612CC6B03D7A309E99903786FC84E1749
-:1039800061DF6E1018DF3994FDB615F84793E7B084
-:1039900015C60B08D96CBD31F06D487E0FF5FA5A8B
-:1039A000977D4E280E3E03821BD7D900388375259C
-:1039B000132EB7552FE0CDAA784A1A95BE7434D984
-:1039C000F525CECB594A140BEDEF4C63EFDB3E16D9
-:1039D000420ABEEF770EA2F37070FAB02B46F9BA26
-:1039E00076E22D2AE8910FE71032109FDE6FC09328
-:1039F000A3343003E8DFF457138E4B06B17949A4A2
-:103A0000EA0FF361FC42C6A73CF47FDFD031AC790A
-:103A1000317CEBD834DCBFB2877D9F982674DE44BE
-:103A2000E72BE58B034D74AD2673A71FF4B18D5DB5
-:103A30006D3E55077F594F07C0873E9E769614C34B
-:103A40007775E3C3FBC3666FC9ED879E4C5D6E124D
-:103A5000BE0EBE7B4FBFF4E1FAB8ED9D233AB8BC71
-:103A600021B8D2BA016863C958E4135778FF724D80
-:103A7000E89D23C370BDE2D5D0797DCC3EDF90CDEB
-:103A8000F5398AEF593A3DEDB2C0F439A296211CBE
-:103A9000258EC70D13490FC895CDD9B2B20EF0517E
-:103AA0002A8781849052E9F7CDF00F809B52DFC9BD
-:103AB0009EFFD0C047D70F99E90B2B89E727A5C5F3
-:103AC000E0F10AEBAF06F8E9FA7703FCAE89C2CF62
-:103AD0004CCA93C240DBC1A948BF6E6D1E13EF52A2
-:103AE000F4F3E885E30D6C7F9AD354124F2FADE5C4
-:103AF000F0BB53F45F047E67927D2702409F39320A
-:103B0000DA27B1FD478A8C0F45E16C95004F76C2EC
-:103B1000FF668410EEF4AFDC9ACEE147FFCC196F5C
-:103B2000FF5500BAA366B3A3189FD74925747F79C0
-:103B300089EAA0F2C12E1109EA59C06C4763FB64FF
-:103B40003905F6F12D3ED477CDFC7B9E36AF5E4F26
-:103B5000CF12195EA3ED21EF9D8676338EB7C1C5D6
-:103B6000F51BCF7306BAE87D3F39BEDC192832FD5C
-:103B7000274BF470FA790EED39F3D0BB1A0E517859
-:103B8000D7E5FB7D15B0400F413868F243931754D9
-:103B90008E64890300FE010278973CE558C6CAE3AB
-:103BA000847C3C460E9B0B6403DF217AFD2607FED6
-:103BB0009BE1C1FD4662E53F2FCBA75FD5BEAA8D35
-:103BC000D95726125F2EDD2E32FD91A869B87E6D81
-:103BD0005F11AE5F68F8A7F2C140AF32CC87321CEC
-:103BE0001B09E1E00E6A6641DD45AAB07E695C49C9
-:103BF00058A0E358A4AE06E0CB96712251B3E3D8A7
-:103C0000555C0E255AC79689F1E5C4CDA29BD9C74C
-:103C1000CE2ADC1784DC837AA1A006C837A81F0649
-:103C2000B9BCF479018F1B6BAAC927743F590FCF18
-:103C3000457BDD9CA7FAC1DE075901FA23C9286537
-:103C4000A5E453F4F4D98B47B216C7333919FEE50E
-:103C500034AA17E7207D2C00FA205623FDF4D24920
-:103C6000461AC80A9887521E775C8E57DE2F211D90
-:103C7000F5D281B62E4586F162E9C35E4A2D0E115A
-:103C8000AB9D309F811C7B0303F5F78BC5809FE0C4
-:103C9000D4E1140F03BBE6A13C737179525F38FB8A
-:103CA00028A874493ECFAC5B14B0F3890070DD08DE
-:103CB000835D0FE3CD5D5B46EBEB61B0C1B4BA6EE3
-:103CC0006699EA646462D44B4545D2F430B15FBD75
-:103CD00046F8C6D2F7FD44EBB7C4C83B42565F9DD9
-:103CE0001E750FFB9E4AFF07FB2B39469E26F98D5A
-:103CF000FCDD15F39D17019608DFFBFF57BEE7219A
-:103D00008F5B154A0A963CD113A2B499443CC96012
-:103D100027D92753FB8DD63D193D2A4CE94A78A96E
-:103D2000E7762AA1FB534FCF6F727EE9ADA8CBAEE9
-:103D3000A7E35E2A75FA805E0752F6989AD2773D1D
-:103D40009BB8DED75B2FDC8174BD9ED211E8C36ABD
-:103D5000A188FEA68D792F7BF472F194C657FAD014
-:103D60000751244D2EE7C03E14FDB6E2EF4E1FE68C
-:103D700018385F2D7D38EE31E2E3DBE2EBC2B7A409
-:103D80008FEFFABDFA44FE07CE9F285E51FF6E50BA
-:103D9000FAB703FAE2F571C4AB9DDA2FF1F8ED172B
-:103DA000BDF8548DF288DBFF51B961B4FBA5AC5B63
-:103DB0004EB4F5030F29564FE6E3DAAA4DCAA7A978
-:103DC0003080C760EF6C541E5741FFBE047A34E860
-:103DD0007BC132F4FF923CE68F850144D0FB157F16
-:103DE00008FD0C209F74724DCE30EAFDA634BB5105
-:103DF0001ECF5105FDFC6DD532CEC30ADF4B437F8C
-:103E00006D08BE6BF290B0CD1DA557F814B3F71F27
-:103E1000B92A3A3069EF091ABD1ADFDB905142E244
-:103E2000E1AFCFF7EE30CE37215F8A7DCF2929DD94
-:103E30003ABD23F17B12E9D6E92F376A711D8EA7AF
-:103E40007A33392850FDAFD67B170928489F28C7F9
-:103E50001AA0A4F2B4DE5BE241F9BC4788B1CF15E9
-:103E6000464F4A0AF617AD4CBFD2EA89E7C3BE1BDC
-:103E70008D1329A81F27EA5F5B33EE0989321B7374
-:103E8000F55B5B256AFFD4ADF5CF29A7FD1B6B8ED3
-:103E90006E958645FB2D3169F639159F6340AFE17C
-:103EA000F44B683F849B48BE01FB8972684527E755
-:103EB0006DA473AB84769FC2F14884DEFD4087DC3D
-:103EC000CAD7692127B01F0C84761CE9C271E1456D
-:103ED000A8AF37FBFDE5144E8D52C8BA1AF8B98D5C
-:103EE000D7155E4FE6750FAF67F33AD98175B34CBE
-:103EF000EBB07FCD210FD6EDBC9ECDEB29BC9ECC87
-:103F0000EB39BC2EECC0FA7A998DB7496A67E3DBCE
-:103F1000795DE1F5145EF7F07A0EAF9397D9F72D3E
-:103F2000ACEE30B7B3F11DBC9ECDEBA9BC9ECCEB83
-:103F3000B9BC2EBC8CF584FCB280C13FCA1F18BC32
-:103F4000357A240057831FAB2BA69DD18B49205C6B
-:103F50000FAB42FDFFD0D0BBBCE06F5C7FAAD20BA1
-:103F6000F4537F9B464F01E49F24E356E463662DA0
-:103F7000EE98B67A0EECFFFA0C19ED49C2FD305AF4
-:103F8000FB86E4C0D46CF0577C6022F1EC2EAD6C63
-:103F9000E57CF769D07BA97EDEC2E3914FF278E43D
-:103FA000568847D23208F1485A36F37864138F475F
-:103FB00036F27864038F47FE04E291F910E79C83A0
-:103FC000E58B108FA4CFF7403C9296BB211E499FF2
-:103FD000EF8478242D77403C923E0F413C9296DB53
-:103FE000793CB23EADE428E81D97AA45D40712CD2E
-:103FF0007F6895917F0E596C8C4B0C0A18E3120365
-:10400000E718E31203CA8D718964BF312E9134CE53
-:10401000189770F98C71094781312E61538C718921
-:104020006B0FCE36D48BDABF6FE87FCD9E0A43FB91
-:1040300088D052437B7ECB6A437D58F09F0CFD7342
-:104040001BD619DA9F32E5207D65AB8D867E59D56A
-:104050008F1BEA95767FB709FD946957E5AF265F18
-:10406000AAE97A7E192B1F4C99C4EF4739C7E4118E
-:10407000FA6081FE8632BF94F5E3EF1D057BDD9289
-:10408000C7E4944589B13B63C6939DBB4FA8F43BFD
-:1040900065EEA3DE2EDD7E245EDD7B60EF488C4F77
-:1040A000363ECAECF1265EF65D473DF66BFA5B7C68
-:1040B000BBDC269962F40866D7343D2A60FFEF3AEC
-:1040C000BED61E3B6EF47B141563F4F66D48F3AF59
-:1040D000923A9DBE60EE4A9E4F50CE33FBD7C4F756
-:1040E0007B5981EF541D85F77A0FF159687DBD73B7
-:1040F000929FE925A2824276CD6D68A76BFDB579C6
-:10410000D5396733FE42D947D8C0A7EC063FC1FA7C
-:10411000B4FEF53739622261AA97982202FAF56453
-:10412000A97C6A36D5C7E56326DF5AC067027B9F44
-:1041300090C7193FF48A063AAE5BA0F13F1F9B1F60
-:10414000CFBBD0F85B6DDA247C5EE7E97F5E169822
-:1041500017CC87CFCB1C7160698AD870BEE323A9C6
-:10416000581F1749C6726C640896632283B01C1DE1
-:10417000C9C5B234928DE575916BF0BD92C8082C1B
-:104180004745AEC3E7BEC8282CAF8DDC80CF8B235C
-:10419000E3B12C8ADC8CCF0B2365585E13B9159FD5
-:1041A0008F8C4CC37244E4767C5E109985657EE406
-:1041B00007580E8FCCC57258643E9679917958E6AF
-:1041C0004696E17B3991255866471EC0E74AE47E52
-:1041D0002CB3228F609919F911964323B558664480
-:1041E000D6623924B209DF1B1CD988E5A0C88FF13B
-:1041F000B937F21896E9916D5826479EC3764FA4B9
-:104200000DCBA4C84BF8DC1D79014B57E467F8DCF3
-:1042100019D98FA523F21A3EB7477E8EA52DF21627
-:104220003EB7460E6179253C5D490F1EF7A9918F77
-:104230008FF9D8C8C74B8F19F978C96F8D7CDC7797
-:10424000C4C8C78B5F37F2F1C20E231F1FB9D7C88E
-:10425000C70B761AF9F8F056231FCFDB6AE4E3396F
-:104260004D463EAED419F978E61A231FCF78D0C850
-:10427000C7072F37F26FEF0223FF4E274F1BEDF4D6
-:10428000C93B0CEDEE092F1AC67396BE1C63D7848A
-:1042900090BFD80BFFD5F09E35EF700C5F56197F9D
-:1042A0008AF19F0348207EF930B1FBC0AE89C56713
-:1042B0000AE707A9B0EF6899C6F7DD00D877B44CD4
-:1042C000B97502C6A952678E9B07FEB8CBA7040535
-:1042D00074226166753EE841294308F32790FC9BF0
-:1042E000FDB45E3B48AB135580FA5082FE0588FC56
-:1042F000617B36ABFFB2EE91491007AE35F376B570
-:104300007612F8D56A6DAC7EACAE621DF82352927F
-:10431000FC83215169A7393E3FFF5892113E032586
-:10432000FF6F245AFEB9ACEB21F027FECA1AF877CA
-:1043300089C263B935900521B4F3E6C0F3203A721F
-:10434000047F27F42B12FCEF4AC8CF8D7ED35B404D
-:1043500070D2F6A152F987D09E3A730FDA171A1C61
-:104360006A5DFDCFE79D5EF944504E6AFE8AA71C48
-:104370006EB43F1B9F904310373717A4A37CA84D02
-:10438000262C1E0A71218C0BB3FAAEA14AA891E922
-:104390008B46B9B2B5FE7E884758413EE5EAFDA797
-:1043A0005DE83F4D024B2117FC033D99122D575AF2
-:1043B000C2F52057BE4AEE3C2998102E1761FD0F1A
-:1043C0004D0F61FF758E99E3605D142E5FC07A29F1
-:1043D0005CBE944627860BFD2BF78EE1AA05FC6791
-:1043E000AF60F05F3A4C81BFC3383229C7F115D5B1
-:1043F00087F03B2E79F07D0D8EF4EFC19431D1F82A
-:104400003F7D4F360FE83B9E36CEDF25FE7D2E1FCB
-:1044100035FAAE4E20AFB47825516FFB567EEFC310
-:10442000B218F73B66A91CE3B47DF8619A511E9A55
-:10443000D258DE83498A1F7746C7318CDF3AF3AA08
-:10444000E2D99ABF85D4DD7655FD1BB4FED44084F5
-:10445000FEB91A9E5A6F437A1CC6DFCFE57ADE5B3F
-:10446000BF7F556D02BACC2398CF11ABDF356E15E7
-:10447000911E739399BEA8C15BE2FAA1F65DA9C92A
-:10448000A827BE2673BB78EBD5C17F0F877F2EC5CB
-:10449000F3BF96F49D07D93993ADC7C3AA0545C1AB
-:1044A0007720DF64580BAB4B5BE97C8A13CF87F036
-:1044B000B884B68FA416D69FEC318EDBE7BBA61965
-:1044C000BE78F1B384DFF99671BEF966639C4F7BC9
-:1044D0009FE20BF19DC7F528524DFFE8BCF2891110
-:1044E0008E5ABC4FABBFF5FBB1184FAF0D96B078ED
-:1044F000B993C973F2351D7D0CB8BBE2E3418BA7BC
-:10450000D671FBB2DEBB03F3D9C85E239DCA831606
-:10451000E0F3C6820A0FCB4763FD2C431FC4FCC8DF
-:10452000C682D5E8CF955BFD56B06BE502D107306A
-:10453000979227F3F649D86E69657AA705DA15D000
-:104540005B77AE45D1100C35807F98A4493E086357
-:104550004AAD8106E82735101C8700EBA3F3D9C1CB
-:10456000F198E195D695D17F6604CBC3367C8FF860
-:1045700087E9FA85F87A33331E0F43BFCC6055675D
-:1045800019F8FDAA088E9F99B103CDF2C19ED96298
-:1045900099EEBDED7CFCCD7C3FD9827E0FBE1760CD
-:1045A000F98CB1FB577BAF955786A75594C1B8F6E8
-:1045B000607939BED7CADFE3FD9EE6FD86417B29DF
-:1045C0005227CEA777BFF37E2D7C1EF5DCDE1F1EA3
-:1045D00064799F75DCEED7FA3DC9C7B3589F7B0657
-:1045E000FC8EF941E68FD5DA83BC5DCBBB904B8D59
-:1045F000F9A31D66B65F3F97197FD2E826111D9378
-:10460000061DDF83F8A36A37D6AB530CF61FA91A31
-:104610006CAC2FCE31F60F8C34D6E79418FBFBAF81
-:1046200037B45FEEF5BB846C98EFCDFD2EF97CBFFF
-:104630003CDD5A827647D4DFD765D3DB27197CACC3
-:10464000ED551576787F770BDF27DC3F63D3EC974A
-:10465000BCD5D8AEAD7B3BDF271BC0FF6101BCB42E
-:1046600030BFCAA8AA7746503CEEF9C0E4DBA124CB
-:10467000865B223FCE46C027EE3F9657FE24F7E3E7
-:1046800004B91FA719FC38F9E0CFF1737FCE54AC01
-:104690001FE07E9C9FF1BCF2FDDC8FF3539E57BE62
-:1046A0008FE795BFC4FD382FF0BCF21D3CAFFC2650
-:1046B000CEA71BA6F807835F6DE794F876F14D321D
-:1046C0008BFF4CA7EA1641F9DE23A0FF7C1CD555D1
-:1046D000E87AB3AA7AD6CAB49E7E0F835B56A0A7A7
-:1046E0000CFCE99EC9AC3E83CB55901F204F8897A8
-:1046F000EB3B1974C752786FE1749E59DD13867CC9
-:10470000165B866714B8406DFCBBB4CD8BF9FC9C7E
-:104710008E6DD55561682726BF5D1E00E3B379E530
-:104720001CE99904E14DDF89CEC380CEE2CE76113B
-:10473000FA159606D7510B9B380A4322F0AB86B286
-:1047400040E388B428BEE82C0C7441E788722B53F0
-:10475000E3BF138C742147B6A37E5C5B353B09E94C
-:104760004F61FD8727907303E718EDA664BFD1FF63
-:10477000555B3DBB5F7FB4EF75E3FBC51D46BBAB2F
-:1047800036AFFFF70BF71ADF1FB933E6FD16B68E0B
-:1047900044EFE74466A27DF07C6B7CBEF00FA68AF6
-:1047A000898007ADEE8EDC88FD63F53E09F4B95CC7
-:1047B00070BFCB7ED07F25C5E3C7BC2445E1A58F64
-:1047C0003FF7F37A39D6A97E385D1E8D7831E887B8
-:1047D00026CA902116D23082703BE3EB75FE0C5A4C
-:1047E000BF93A01DE290AD37AB13807F2C34F855FA
-:1047F00052E5AA330AECD7C74494253B83FDF3BBAB
-:104800003E79114E3FC68F729B3C25A638F8D6CA1A
-:10481000AD4DE2D47871B1259CAED737CDF6A05C12
-:1048200038123F8F44EB4FD7BF44D6E5930CB88383
-:10483000E7099C63F96C83392DA52EED9F0EAE36EA
-:10484000BF63AFB6EF9C2C6F44A3FBD4E1FDD389CB
-:10485000A67F464222E9847D2155D9F148C21D3EFA
-:10486000CC770701AADF27B57F7BA011F8A6FA2332
-:1048700011F9C8803BAA443D1EB4790C56C265B0FC
-:104880007F6B0F2D1121DF3EBFA54AC4731387082C
-:10489000FF0E9570B4B42D0EF9999F8CE559DAAAE4
-:1048A00002EBE0F9F016062FB04F797F940F1BABA7
-:1048B00067FB018FBB33888FE7AF18FC75BB9DA2E8
-:1048C0000A7AE625CAAF5051F89ACE4BB3EB28F0DE
-:1048D000F25B996BB676180939A1DD3F15E1A5E5C4
-:1048E000EBD9B65D5471DE031E0AE37993514C0F88
-:1048F0003093CE30C616A4802AD0F1D7073C3EC8EC
-:104900004FCC6D29667E99BC20E651AC16037B80A6
-:10491000EE357898D3DA316FA536C179810D9C9F39
-:104920004B24BEFDD1C9F970AAEC9B0EF6E89E2778
-:1049300028FDC7F10BBCC3C7796EEBECA4114A7418
-:10494000FF6AEDC74169D3CD2B3722B33CC1966FC7
-:10495000A7EFDF6C263CBFCAF89E49F219ECAD21E7
-:104960006605FB6975C969E467573F4F09F9122964
-:104970009C6EC073AABB7FBAD6F6CDE5A1317A474B
-:104980005E01D27354EF10899BC2B5358FD30BA74C
-:10499000274D8EC805414FBED0974E5AAB4BF0BC49
-:1049A000C9A509940EE99FC5D3EE07BF816B4218D4
-:1049B000D237800ECE021D0CCA53D70A4827631087
-:1049C000DEED5CEE593DCCBF123B6F4DAF03BBCA71
-:1049D0009B0223C7D83724F81ED077EE0888190227
-:1049E000DDD0CF51BA960AFAB7EFAE365EADC58FBD
-:1049F00033E91FD8371D806FE0E39FC5F8A93C5409
-:104A00004F1DA393EF9F3D80FB2316FEB1EFD57999
-:104A10002679E2F16D620A782CA313D34BAC3D4D9D
-:104A2000FAE4AD3D88FCC332632ADAC9BD7675EB82
-:104A30004C5CB785DB8BE63C6E47F6B11BEFF1F5BE
-:104A4000274FCC19DF2D3F74A425BEDD98E8FDDE8D
-:104A5000BCD06FE977D8C8F3EC34FBA3D7EE881944
-:104A6000472C6C8F7B0EC3596884BB3DCFA877144D
-:104A70009AD9FEB4788D7E63B367707CFF26CF4FE2
-:104A8000AB18A7E149B9FB3FE97E5B72D44C1AA190
-:104A9000CAED5CCDAFB404F2D4281D5740DE1AC570
-:104AA000D30252EE86C6F344C47C98F3E43DF77516
-:104AB000BA7D1FB0F073010DE6D3709E42CBC75A8A
-:104AC0001864756D3E952DC6FA22323B1DFCAC8BE9
-:104AD000B69A09E45F2D21D2E92E6DFE940F945B06
-:104AE000981E5449AAEA81AFADE7FEC30A0F912090
-:104AF0007F6AC5ABCF8C81F33995166E8751F82B41
-:104B0000BA3C9BA5CE900CFED14F3AAEBBEB060251
-:104B1000EF87EA0797629E3BE651C5C27D7E8371AF
-:104B20007E579A7FEC7CB5731789E621ED11E29EE2
-:104B30003FFCA14530C4E7AE742EE41908820D484D
-:104B40007C2EE44AEFEFF88EEF3FFF1DDFDF6B6155
-:104B5000F49BE8FD15D69E5B30CE9F56558EFE5ACF
-:104B60009ED7B19204FCE03A37BD3E4B1DA2E8FA55
-:104B700079AFB25F06ED67BA8A7E79FD8F7781EFF4
-:104B8000F35FED7D4E86FD7BFEC55333412F58F616
-:104B90009A8958214F6DAF8B9FFF0AC920EF9676F7
-:104BA00098985F410A8FB95D971F082758018ECBEF
-:104BB0007EEAC278F2D2972DA119F4FDA5AF7C52FE
-:104BC0004C281C2EACEB797B08E83F2F0A2CDF4ADF
-:104BD000ED2ABE9D3E5F2A91FBCAE3F9D12D4C4FD1
-:104BE00039F773C71CA03361CFA17B71DCF6BBCD55
-:104BF000169D5C3864316BFDD8F9AA1784D03081DA
-:104C0000CD4F9FEFADE5B99D7B4160F33B680ED979
-:104C1000607E7BDAE400EDB76ACF5F90AE6FFEE9AD
-:104C20003E37C061D5419381FFACDA630A5B8AB13C
-:104C30003C65417EEF770A63009E04E5F7CA8E1556
-:104C40009817BBB27DD35F4C6E78DFB8BF285C7C11
-:104C50006180EB71936F06D47FF6BC1BF2893FEF46
-:104C6000DCE506B8D271E7C994AE6EFC52B70F0905
-:104C70001B3F92D2773C427A64A0AF55ED1BD9F727
-:104C80003A6E3B03FC6D55CC3EFE1CFE31A8AFFCDA
-:104C9000B818233F2E91DF8E017D83EC498D9B67F1
-:104CA000D02B3FF8BE5EB6EFD276381F7CEEE53FE4
-:104CB0006D07BD7EF9DFBFD8FE08F803DEB079804E
-:104CC0001FAD7AF10337D1C1DF65657CE1C20BCF3F
-:104CD000EF7E9AEE930B1F5950CFB9F08B33990AA0
-:104CE0005DFF85FD7F4D07BDFEC15F4C1908F07863
-:104CF000F0C0CD03FBB363806E43163D7E43885FF7
-:104D0000E5A0C092975FE7650C9EDEEA782B13E67C
-:104D100079FE8405CF71ADA2CFAA4B006F2B503E18
-:104D2000407D0D85F7CABD1BFE622A8E0777758808
-:104D3000E885323C847801EFB7FFC3C45228CD3EEA
-:104D400005C6233DC8DF63DF5B758CE2F7DAC4F884
-:104D5000BC44BE9601FEABF66E64DF6DA7F874F737
-:104D6000C5E779F8C7F8BEF82CB4C6E273F9B3E822
-:104D700063EC488D9B17A7E173C5813BFBD51B34C2
-:104D8000FE7025382F16D8BC2216FF042BECB397E3
-:104D90001DAA97E1393483B65DD8772993503AF943
-:104DA000CCDC732FF0C99E5F583C60772CFDC57139
-:104DB000DC77170EBC2B2BECFC8853A07AC505D2F0
-:104DC000FBD7097AC64A815556ED74852DEE28BE6B
-:104DD0005686664D55DCF8FC143E0FB1FDB03274BA
-:104DE000E80E210EFE1EB2E630FD333400E1B28241
-:104DF0005A449E42235E857180CF53B700FD25C281
-:104E0000A7B67E0FAC7FAC0EAF3BD93E8EEDBF9206
-:104E1000EE57E0C37DF01B128E4379A1CD22413EB7
-:104E2000E4057E9E2516EF51F8F3F390DF525FAC58
-:104E3000B226883370385C69BF5F697DDF167EF704
-:104E40005A151C37168EE7BE8E2F0F9A38FF584919
-:104E5000AAA60ED6C9338B99CAB36CD0F7CAD5218E
-:104E60004274BEF5EDECBCDDB93DA610C88B587E92
-:104E7000B132817DFCB495F9BF571E3C540C7CEDDA
-:104E8000DCE19F73BA6474BF72EF2959E5F221A483
-:104E9000970F09FC283BF9BC57BD1E7FBC557BFF13
-:104EA0001277BCCF25FFDD30FFCF3BCD44A5437C3F
-:104EB000DE6E9A1A4FDF6AB69A8D79B5AE312792B7
-:104EC000E87B26B71DCF33D6AEF31F57412F79CFDE
-:104ED0008CFE1522F93EB3E0F969BB02F1E55AF701
-:104EE000223CD7A28D57170327C95B8EFE0929AD37
-:104EF000BC94E9D421833D6DF688867953B99B0132
-:104F000072E9E4A8336658E71F62F4C73F48A47EFD
-:104F1000201DEF0FAAE05BABC4B3178DE307D69853
-:104F200088A29787969E93301FF2A68D40BE9AE97D
-:104F30000D9B0AFC64D5761BC6D5DF3A707937C065
-:104F4000EDC2B3161ECF6479B595DC5E3B73E0F21B
-:104F5000F6FFA2ED67E065FAFDCAEDB43FE8ED7B30
-:104F60001D98E4FCE797938A09E5D3956F3E3213C9
-:104F7000F84B25C4C069FFCA9F0E0C41EE42F700F2
-:104F800056EFDE3734047859FEB35FAC0479B2ECE7
-:104F9000270E0224F9D681E3F742FDC29B2ECCEF07
-:104FA000BAF0E6991B611F507D5BD1CBF525FAF372
-:104FB000DB74DC655067EDC2379CD7811DB30C4AAA
-:104FC0004AEFCB0E26E179075D3F7C6F95A5E7217F
-:104FD000BCC885A88345B489C283611F2EDB63FCEE
-:104FE000DE592BB32B56C93D8B58FFE060B65F3BB3
-:104FF000F1BDAF38DD6BEDB1EF6BFDBFE4FC333AD3
-:105000000E7B7FA58554C5A37FC1C6C65DB6E76F7D
-:10501000F9C6F118BDF6FD0E7BFE4381E5E393FD75
-:10502000368C132C97C3C353E87E7D45268B61DFF6
-:105030002E77878727D3EFBDC6F9E5723BADD3E75F
-:1050400083F93CA03FD489B5EB2780DF15AFDA08A0
-:10505000D0FB8A375DE8575EF1CAE5EE7FA1CFCF7E
-:105060001D70A0DF6FC59B0F23BE5758C2F7829FEC
-:10507000AE67BF85ECA0FDCFEDFF7526E823E7CC3A
-:10508000E1CC947EFC432BDA2DFCF217E33AA85DC9
-:10509000505045E7A33EC6F270AA09BB47A09AE765
-:1050A00079908F6DEC9C328F4BADE67EA28B0B948A
-:1050B000249CFF845BD973EE275A7D9B323059378D
-:1050C0000FC89323D751BB44AECA073E6B8ADC4A54
-:1050D000145A9722B9586AFD4C701F4321E427B037
-:1050E000B8A039CD472A69F9700A09E0F948E7F410
-:1050F000DE7DF6EF14C5ABB7290361BC9136C65F00
-:105100002AEDFEB136E433C67B14D4036C5D97F907
-:10511000FD08B1F3BD6C562DC0CFA3F13A962758C8
-:105120002D29C7C1FF4E8E72BED467FD6C9F5DF402
-:10513000A4E03ED3D6B1A9C683FC04E265506EA8B4
-:1051400029204A3EE47BF8B06EE2F0B014AA04CE07
-:10515000F7C21E843F8BB3DC2FB2F83001FFABC91E
-:105160001940FAB278ABD05760E5F7E9989C2AA9C4
-:10517000A4A5D9C9E004E7F6004E32AF4B2D331099
-:10518000AEF47D7C7E933D702FC0C59A31D2C0A70E
-:10519000E4B41243BD0FDC34BAD8F7BF0D3F82F040
-:1051A00002BF8E8271CC7108B7F5357EACFF7F806F
-:1051B0005F3D83DFF544D1ED1F396D92A19E107ED6
-:1051C000DB28FCD2A2FB2A160ED53C0F47DB4F8909
-:1051D000F6EF933504832F8FD7B460A93D4F492054
-:1051E000D7CFD8985CAF2681B566E0531EE68721FD
-:1051F000692AC9D0F99F8857C5731FE8EB87F68CD9
-:105200005BD17FA9E1D7E491BA8DFC4F390EEB79E0
-:10521000F81DB308FCCA54FD1CF92455B78F6794D8
-:10522000DB1484B30FE303B55CBEAEEFC5A7717F9B
-:105230006CAA51B0DCCCF7C916BE4F1E03BCC37DAF
-:105240000E702F05FD5ED35482F2F3095A67F67E85
-:1052500098E8FDE1C9BEF6B099E21F79928225FA7D
-:10526000ABC9094B685836C455891FE825F9C48F66
-:1052700042B856D28EE72592B57B5D5ECF499E8BB4
-:10528000F11F6266728A98581934831D150BDF5A14
-:10529000DF612BD8E189E65376728900DFBB3C974A
-:1052A000C5CCD2EE693F01F73C389B1C6857A6FB82
-:1052B000AAB23291BF5A905E9DBE8050A9C3637A54
-:1052C00002FDEF21FBB40F801E3F843C445A3EDEBA
-:1052D000926B03386F32B77B811F6EE2E7C5953959
-:1052E000140ABAFBC2DEE47CD25D6AE4031A5FF6FC
-:1052F0004C2831D0B3C67753261BE95EE3BB2FD8C9
-:10530000985FA3D25E7E06E6931A69C57D19BB0F2E
-:105310006ACDB22A5C8BF7CB30FFD32981C5D5FB90
-:10532000F2038CBB5FECCADE01E7A9B5FD13BB7EBF
-:10533000A9611A7EA7571F34C7CF07182230B9DEDC
-:1053400040E98D605E82828868A6744678DE02DB62
-:105350004FE3B0D4E8781D613C44ED10D93CB9BFAF
-:10536000563B7BB3CE5AE2073CAE6F677B68A09D8D
-:10537000C749D344905D44A2F6A4933E920E8DB7E4
-:10538000827E29997D47810FF6B8C47688E3AE778F
-:10539000CEB6421C44482E45FAF9CA5591D55F5CF9
-:1053A00007EE5303FAF3387DE474219E8745BFB0BE
-:1053B000C95342C02EDDE7ECB4633E935D34C49F15
-:1053C0002AED810CBB4E4F2D82AF73BCC3B0FB12D4
-:1053D0009CB72CE0EB21192AC9D3F189DEFB8F148D
-:1053E0009514E8F8C5BA61B7E0FD4A7DF944027E3C
-:1053F000B8EB7F861FD6668510AFE658FE93E6C7EA
-:105400003B9D68A9C2D508263274FD0F92914E27A4
-:10541000023C887347AF1E74534EDF79C6F2BFA8B3
-:105420005C53D00F46E5DA53E3809F26946B55F723
-:10543000211D370D51808E0F353FF22CD43F69B6B8
-:1054400028C0BF1645361285CEB732321ECBC52DC9
-:105450003FC6B2A2A58D6E2242D66EAE6C9E0BFDEB
-:10546000B799D0FFD31DBAEE4235AD773759507F8B
-:10547000EF6E7D200BF4BFEE268702F7AB74B78E7C
-:1054800036B63798709F75B79843261E0F36413C45
-:105490008270FE0E5E20DD7C49A9827AFCC5987878
-:1054A0004BC5168B5F7027867F454B7C7DB216FE01
-:1054B000C9CEA3E5037F2D3BF9A32CA00F8DCF3CD4
-:1054C0009C42F91EC0EFA485C48B0BDC649FB2C460
-:1054D0003E004AFFFD768CEF5FDD3D589F8854EF1C
-:1054E000463C05DCB30C7E5FE657FD84EBE5C49AD1
-:1054F000A0DDCDDFF7C46F5FD1F4A7B71FA5B50D51
-:105500008546BFB609FCD502D8E3B3F8FD196C3E59
-:1055100071E89AE9D34D16E42B0BB83F4AA3F32860
-:105520009D05DCFC9C9E810E97441E43BE276C2A81
-:105530007A6A3C85DF1794FE803E844D1307027C17
-:10554000D736DEB0E51E3AFE97BF35E1F3C5111B35
-:10555000F63FFBA8EFA97BC05EF83733E6917C7974
-:10556000740AC691CF9A8D7E8C1B1C6CDF1FE4FBE6
-:105570007F516493413F5FD4305F063FE8A24833D8
-:105580003E5F044124CC8BBFFB976579105F229866
-:10559000CF72D07EC79475284F4BD08F56B9D91291
-:1055A00037AFFFA05D31F2ABAE261C9750FD2C2D1E
-:1055B0009D8FA7E33B959154DC1FC4A312C8EF5EF7
-:1055C000C4F94FEFFC5ACD06FE73D616DF4F73D4E5
-:1055D000CEE4C2A2C80DB8EFFAAEEF467CBE48FBDF
-:1055E0006E17DBA7D1F53C353EDE7AA2EB9880FD45
-:1055F000CF26C7FFFE9FF9F7BB6B16133FE55F157C
-:1056000016DACF09DF7FA07E1CD8F9ADC929826EDA
-:105610005D952DCB885FB7AECAD679B2FEBEC928DC
-:105620001EEEFF659914C5C39F1B974F595708FA83
-:1056300042F97FC23EAAD834B1388076FE4684F360
-:1056400027665F26F0E3332D0FB8E3E50FFFD9AEF1
-:1056500018FC1C952D1C3F54EF2ED5E147C34BEC95
-:10566000FBDDBFAFFCEA51E053DB5C06BE125BF62C
-:10567000C15B767CB8D91C1ADC0A4800E1A6BC7272
-:1056800002E87AB3C307749D187ED790407FF04B31
-:10569000A03F533D4B748C86EF12665FB6303AB82C
-:1056A00012DCA2DFE57450167F3D63F97EEBAEA9F4
-:1056B000262ADDB0A7E52BD1C12344B5F6B38E5E13
-:1056C0003A78C24007631D9B910E3E03FD27BF2F12
-:1056D000FE4FCBAAFB7AD0771A4D18F73A6D57D305
-:1056E000BFCFEAA3803F9F7607675E5F1AAD2FD9D1
-:1056F00035CCADBFA7F14C0385431CF88D75C4ECC8
-:105700006F8D7EF2545238E6FF1DFD7C92E0DCCBBB
-:105710004DF6B21B009F2418DF9FAC95BDE7AA93FE
-:105720009CBD762FC8D1D3CE9CAF42B4B5C11EF874
-:105730009E83B6D7253F8472FEF46901E5F0DADF77
-:105740003F9C0F7CB88FFE5B1379FAD361E8B7FCFE
-:10575000974FCDA84FE1B884EA3F200730671CED92
-:105760008021E8674914CF5D0197F98E8EC675B523
-:10577000F8EDFA9ACE1FC3F8C4AA128FFEFC00619E
-:10578000FAD8FF8179E8FCF3B239E0F181BD2B90C2
-:1057900072A07BB3C4F2D7CDDEB451AA0ECECB1C1F
-:1057A0004C9FB41D39D2904DDFB72DFC770FF8F91F
-:1057B0002CF43B505A33A48B7A7FB996F745F27498
-:1057C000CF7320BF82D60D7E073ADF7EECE6D7048A
-:1057D000EDBE4F15EF2B9EAB5D5800A0A374F39167
-:1057E00096BF22D5B1F664ADB98EB5733FEAAA0A69
-:1057F000E6277D6B5E12C24F5BD7DCD737E07D6951
-:10580000735F1F341FFC69739DF97F0478BE06899E
-:105810003540F7C94C3EC7D2C566CE7F7ED026AA9A
-:10582000663ADE1173CF6107EC8B1F0A68577FFF62
-:1058300083236620F9FF3876DA0CF723DC078945E5
-:10584000743DF3882233253A84EFCF27ED2E566F2F
-:105850001F00F79946C7A326338C773F8B3F7FFF06
-:10586000836353408CD2F1D64379DF6F890CE3CF49
-:10587000EB50EAD9B1273EDEEB743C313A5E2FFCA7
-:10588000242BC2230A1F2BC2EBA3DE73242AEA17A0
-:105890003AF8A2BEA2C1B716E046E1373769CE7426
-:1058A000529C78BFCC750EFF23298ECE2716BE5F83
-:1058B00042D320385FE67F09F6CD3F3BFC7BA15CFD
-:1058C0006EEDC99472F0BC573BECCB95A640563AAE
-:1058D000A5ABF34303F903E0505067FC386FEC3E8F
-:1058E0003D09FBE55A28E9BE8079F07329F7F27586
-:1058F000BEF5A3332ED897F5078E6742B9C2D4B54B
-:10590000F96ED86FBF31A1FE79B123BFDFBCBA9366
-:10591000DCEF72D4A1DDA3C1D6791FD7E7EEEB701F
-:1059200084D652D2B8AFDAD46B5F015DDF57CDF2C7
-:105930004F88D4597C87419FACE3E7D4FA8E03F6B5
-:1059400042EC38DA3A0F670EBE06ECCB6747CB68FD
-:10595000471CFAEDC58F2A69DD3ED48A76C2E6641B
-:105960004EBF65CC6E7D36D9EF2802FF57638A4F54
-:10597000A5EB6CFC256917299C0E8F782834A91497
-:10598000EE7916D177B625F25C7012BC57C8EE9945
-:10599000F170BD744BE7E916A0C733272C1877F8D0
-:1059A000C465C2F9369ACB33418FFF639B1CF7FE67
-:1059B000B28F5C12CEB74DE8C23CBDF92468057EBB
-:1059C000D1D1397B20CCC7ED231E20FF33AD2691EA
-:1059D000DD6FA6F95BC212F3F7AB12ABFB79E9B14D
-:1059E000E9EF17DB387532E6792C687A17CFB1B951
-:1059F0004BE3DFEB6373B2F9BA3A53A6017C5D93D4
-:105A000045CCC376F97A04782FAB73928CEF078577
-:105A10007EDFCF5AE399067085F781CF675DE5FB9E
-:105A20008293E5693DC6EDEC36B3AF7E321DA76DBE
-:105A300073B200F8D0FA0D7632BE7266B2E64762F3
-:105A400079C299791E5B1E9D77A61F37377195061F
-:105A5000F11CD30EE8C7FCAC0887B611AF84218EC9
-:105A6000DD08FE15C0B399D153E36601FDAA147E8B
-:105A700083414EFCF109CBADB08EAC06C103B63B01
-:105A80002DE3CE7BB6CBCAE8BCE929B40BC14D0BE4
-:105A9000E366B6BE8FF3722558EF1A4E1F7FBC0225
-:105AA0007D9C77303F54667527BFDF2E8CF7D80575
-:105AB000014E50F797F2FBEAFC8A3E3F26BA7FD6AA
-:105AC000723A247E88B3558C9343E047101BDAF07A
-:105AD0009ED4F9410BF91E5D5F93C0EE1D55478BB7
-:105AE000FCFE24FF498053F36303310F6F83E8CF3B
-:105AF0000439ACFEB38C71BAC3FE8BDBE03EF8ED2B
-:105B0000E364DC1787FDEC5CE1B36B72DA204EE9ED
-:105B1000AA9ED4329F8E17F260462CA92D25EFE461
-:105B2000439C728DE81168FF60B996B7EDC17CF2B5
-:105B300051A62FA615401C6F90883EA53302BBA727
-:105B400061FD9A491EC0EB7A4F9AA0B75F66713A21
-:105B50003891523ECB49E1E37DF4710F9C85DB1215
-:105B600049BD06FC886A83ACEC62F142BCDF21953A
-:105B7000E325B5530C2F7263DDB9989ACA5B2630C2
-:105B80007FE98FA707989F1362A363D0CFC9FFBC9B
-:105B900088D7345E6B1C69C7CAD6758BB03F8C93AF
-:105BA0004EC7492D15C363207F2DD9BF1DFD7653E8
-:105BB000AC08272275B5009C425306633EF8E3E328
-:105BC00087BF0BF9E3A9477B66831C0D0DB5FF4723
-:105BD0001BF0A9F5B202FB3C754DF73DF03CD9F73F
-:105BE000E40350A6D67DF808F0E9E4AEBFD4E0F3B4
-:105BF000A9B2C1BF98FAF1D9BF417B6AB96CF05321
-:105C00007E9552FEA093C2677B613058A1B0E7FE3B
-:105C1000F4E83AF6ADED9C0AF7D89F9925B2F33235
-:105C200084F1C3AD5B3DDA39E552900B1ADC36885E
-:105C30004A7B18D635D38AF491473A915F0D826832
-:105C4000766E142FA91F6FBC1FF23562E7D3E014E4
-:105C50007ACF51C3BD80786E3107CE1F4EB6035D3B
-:105C6000EF2FE9F4823EBF39C1FD9D475DEC7D8B8E
-:105C7000C8FCACB1ED47783BB0C496122CFD455042
-:105C80003A899A046586D50FF9CFFB45E53F91CE59
-:105C90001F3729801FE86FA6F83BF4CEE7E85F3C8A
-:105CA000147C1FCBE75C05DA78E174FA7E73E9694E
-:105CB0008CD3347B188D5436307E51E9EDB242DC02
-:105CC000A4B2907876707A53353883BF8CCBAB8A88
-:105CD0003B185CD30A09C67DC11704F74BA5433FA7
-:105CE0000ABFB486B5F7231E49A79A4BFB35C3B844
-:105CF000809F3A91B071BBACB87F83268C7BD2FD7C
-:105D0000FE3BF06B55340DC4B83F1C0F86F152F8C2
-:105D10007753F8786D741CF01F9E6930E1B9004824
-:105D2000BF81BAB286D232D2674F59011D5729F5C9
-:105D3000781A353AD0F818DD1A0BA8BC00B82D50E7
-:105D4000D5FB81FE4E5B3DEFC03C1C5B2D0AAC7F5A
-:105D5000C1D6571F06FDC5E1ED6A00FE50398ECD54
-:105D600037A5893E473D47F91DF4AF6CB228EC7B5F
-:105D70001C7EA59CCE381C16F2792F6C65F3B60FED
-:105D80000D05813E2BD750B8425B80D13DB844BF52
-:105D900011715F1D85F5BBD4741C77C09C987D1173
-:105DA000437FDABA2AF8BA2AD6B07511BE9FE8B492
-:105DB000C2306E45295BE702C2DE17E1391D7F2143
-:105DC0005F4F85FA0A960B1B2C86F1B717ECEC8413
-:105DD000F96417CA8A807066F71B66F27565D6B1DA
-:105DE000EF6516BE82F022D5BAF9A25F5557A7FB20
-:105DF000EACCAFE9C682C3FF70D0808E7BFA47EC55
-:105E00009E81BCADC6759DD998FF1C9CF7FEE40928
-:105E100019E3DEFB45DFC92CB4476585F11FDFFBC5
-:105E200033804F2FACF3011FDF57C6E07FE63612F9
-:105E3000027A1876B43C05E03DEC68809755184F1F
-:105E4000A700117AF91E9D1F35991A04E09791DC7D
-:105E50009716031F18C7CEF70CD5CF9BCE2FB521B1
-:105E60007D12E443A58D4B9924E315DE31ED479F68
-:105E70009E0DF78FA61D79FA01F8CE20A25B0FD0F8
-:105E8000833B979D6739425BA15F75F7A3808F269F
-:105E90007E9FFC3098590A9647A04CA5FB7B530A7D
-:105EA000CC5322934BA2FC60D7136346015FC1948D
-:105EB000A7122CC3A4A42FDFD0F51FC1FBAB429CBB
-:105EC0007E16B762B0CF773D71CB08B0E39B414FF0
-:105ED0004C827B383D5F409E8EEA1311EECDE6B0DA
-:105EE000B5300DEEA51609E82F5B0A3E1461DF35CB
-:105EF00077101FD0476AF9DF2D7A3C96B9D8EFEDBD
-:105F00004832D904FBFFF088EEA980A7D02111AF59
-:105F10001898F42BE7D30ED0873E6279306DBFAE70
-:105F200042F9FD50A61CF73E5D72053D31B67FCAB1
-:105F3000B0D9E8CFCBDAFA18DEE7593955F27D8FC0
-:105F4000F64EDB5A56067A8C524EA96B209D77EBA3
-:105F5000A8B5F83B103358BC4C99CA9E2B9359B93D
-:105F6000A9E6E88FC16E0FEE916C7974BE2337B24B
-:105F70007BC436155EB406A85E5A5AF6B2F536FAF8
-:105F8000FCD3522A05E9F34F275CB4417CE7D9D210
-:105F900049A900CF8E06A35E47E0722B6A0F155900
-:105FA000827E179D57D30704E169B2845B2A68DDBE
-:105FB000F4AA13349C3E76CEC6A6B63940A70B0A87
-:105FC0006474DBC7AEB793CB8BF9D53D53E1DEFCF0
-:105FD0006C9530FF7EF02964CA0B39CBC8563B91D3
-:105FE000E9B8B632FB2428F9DF06BE1C2C0CC8F039
-:105FF0008AC6CF9A8655EC067E76DCC5EF0BA95A89
-:106000008CE7CA70FF9B401FEA298B6737153BED71
-:106010004C9F6DBDFD38F8A91754337D3FABF50B90
-:1060200001F141F5BE4174FCAC52BC5A902C58139E
-:10603000B416017EF244A228309F7602764290CABE
-:106040001F3D1CB471FFBBEF2F7359701DC5A03BE2
-:106050008F8EAEC7C9D793E9A3EB8923A70BE1BB0A
-:1060600090EFF3CC1787C603FCD73013292B784A5F
-:10607000B0EAE691A55EDD3C8AF83AEA5CECBC85C4
-:10608000ABB44BC0FB6B62F83BA8F3B06FB73B2ED1
-:106090008C62F6BD919FF6A973BA8A7D9E19C3AF33
-:1060A0008A2CEDD311BFFBD8BDD584D07D6BC5EB59
-:1060B0001B1576CF6748BB5FBA0AFA8D74393D402D
-:1060C000074D233E2C01F86CE6FAC2C24282F6EA82
-:1060D000C28C4ED417E6D7717D41F2D5039375B4C7
-:1060E0002613ED7E18D01F50550213BA8EEB0B9A73
-:1060F000FCE772BBD2DBD98072B58E9DF7EBD5334E
-:10610000542657B3BC4CAE5736D0EF289C98C7E8FE
-:10611000F51226C795AD5C7FE07238957F37AD816B
-:10612000C9AB54D023DC9006A1A25CC618567A54A1
-:106130006F1950C8E4656AD37E946B2F3A199F4C4F
-:10614000DBCAE4E5D0778FA900262F7DDC42F9F485
-:1061500013BCDDEBA1FA594A543FDB20F2781361FE
-:10616000FA21E6FCD3796EE6FDB5E73BF9FCF61FB4
-:1061700049B915F8EBAE600E9E2BD7F62D7A3F6924
-:106180003D93DF879059CDE2E42EDFA2DDFAF3677D
-:10619000152E76CF50858BDD07EFAA0E7B615CBC98
-:1061A0005701F9B88CFEC58D545F42FF13B7AF4A53
-:1061B0009DFC3E194E3F89E489C6875CC4EF2EA43E
-:1061C000F0FD34B41BF9B54AED2558DBA7C1DAC19F
-:1061D0004B61BF076795C2FC9BC77F85F91F5909B3
-:1061E000ECC58F343BF35BF275D7D463CC0EED1462
-:1061F000E39EEF497733FF43BB441C004F5B90DDC8
-:106200001B671B27C7ED6F7333BBEB53BE1F9BC7C9
-:10621000EFC6F39909E5B34454531C79AAC9DB26A8
-:10622000C0F3F574DDAE5FD5E3EF0849A17213F258
-:10623000578276679074A11DA916C8E8376C32079B
-:10624000AD808F2DA51CAF1E6B1B9CCBFCD678A1FF
-:10625000F0003C6FF48B21211BF01CF21431BF0EB7
-:10626000DEDB7986DAEFFA7845AE5BE47052F087D0
-:10627000F6B21A187D358F97711E8DA3D2DB4CD9DB
-:106280007AFE2B70FEC9E8AB71FCDB485F573BBF61
-:1062900045D52F3DF3A92E9ED8BDEDF91C8073F492
-:1062A000FE0B7FBFE7291655FF65EBCE387182DE06
-:1062B00076B0A39C600786BE6F886BBAD9BC6F743A
-:1062C0001BFD77C05FCD685C8406837F69DFC49067
-:1062D0001BDE236B58DC76098FDB7EBEF3763CAF8A
-:1062E0005E44C9CA1C07EF676B8CE7D5CFEE7A7E98
-:1062F00030F36B840CF1B325BB7F3ED2101FF61335
-:10630000256D0CBBB718E5F4DB3ED5628ADE3F2075
-:10631000C3EF0DE446EFD1B293762C9DB07F69E9CF
-:10632000263D587A401CE5829DE4C3328D946399E2
-:106330004EAAB0F492209683493B961960E7E68214
-:106340005CE8C152211E91E8F87E0EF1613D8F9408
-:10635000632901DE52A37109698F15F337207E018D
-:10636000FB3ED1B9B391EE8A656E8477D5B5E598D9
-:106370004FCEE21533DCFEE56E942F61E4DFF33996
-:106380002B3FFA9391ED70FE68F56676EE45E3EFEC
-:1063900068DFD0EFBC94C2E481FAB8807C6C9D6366
-:1063A000E68D08CF26F3397DBC8158AD79F0FB1E10
-:1063B000DAB8F3B99F613E9783E0EE66E7077D7830
-:1063C0003E693EF81B74EDA4B79DDD4BA38D233AC7
-:1063D000260CEF2FDEA77B1FF3A32B62ED802BC9CA
-:1063E000EF98FA82D8F7BFA6134A8FFAE35EBA5144
-:1063F000C9447AE5F29B129482EF35584EA13D16BE
-:106400009CE2D7C3E539CEE734B9B22026DF23B604
-:106410005C20F1FD11330E9580C970EF1ADE29A1C1
-:10642000DBDFDA7DA4DAEF642DF107E441EC352FF0
-:10643000E0D1C3E71D24AD9306D1F233A8EBFCFBFA
-:10644000BF4B0AEC77EBF68BC7CFEE59203C2EB151
-:106450009CEFC729A6A632E0736702C40776C41270
-:1064600052E5BE01FCF9C7D8FDC443E8BCE512B053
-:10647000E3882AA6605D85DF6B395FC3CE0975F3BB
-:10648000FB6876F37B85FFC4EF112E6A797826D0FE
-:10649000C1E7FC1E9A828E8DE5E0F7296A77CC036E
-:1064A000B95FD43EB112DA8BF658D8EFF0703EA146
-:1064B000CD0B8EB9DBE97732E8F7AC29C04F08CABB
-:1064C000DDF34DF610FC7ECFF97613BB47B550C413
-:1064D00073F770EDA089CF2F2905BEF75FF7823ED5
-:1064E000F239E727DDEE64862F4915D434484B2175
-:1064F0003ED06B1E73ACC473908B9CA1DD4FA74143
-:106500007EB8D5B78E7EFFD0FE5733E1F9538E9516
-:1065100058FE69DBF14CE05BE70F1C97E3D1ED0A15
-:10652000292C837F6A59872042FCA4AC7D9E0CF104
-:1065300091457B0FA15F79852780EDCB5BF6637D6D
-:10654000F2DE77317E323449417C9F1F14403F6F29
-:106550005E8B250C3F59B22F27B8346EDC3E89F193
-:10656000DDC71C6FE0F84F39DE781BE1B2CD82E762
-:106570003F0E6DFB158E7BEEC0AB7CBE04F305CFEA
-:10658000DBDA4FFE13C8AFFDFC3CA6B5D3ADF70771
-:10659000FF9DF375AD7E5EFB1D9D8C2BF4D37E8F2E
-:1065A000C7D9E9667CA9D30D71B345ED0C0E7F32D6
-:1065B0008765D02397B50B0AFC3E5ED9DE363C0FCB
-:1065C000B8ACC38AE72596013C006E145E08979626
-:1065D0004338FF0C80CB6858C7FB988F9FD741E1A9
-:1065E000521C5DF7326700F7ABB65E0A07B6EE7D68
-:1065F00057C253C088A7967765F0CB2CEF10107E5A
-:10660000CBF7B2792CEA60F39ABC771EE2FFDC018B
-:10661000A280BFA57BFFF1CF613DE70F58F1FE5E81
-:106620006D5E944E89BB04F60FA353D2C1F8AAA69F
-:1066300077AF08A5E3EF0CF4B6EF65BF330A20B3DC
-:10664000517A2DEA988571C162205EA0534FFB48B4
-:10665000F67B81C14C80EBBE89E14C98F739ED7730
-:106660004CA56026E065A43B509CA4DBE7674FBDCA
-:106670008A72B140ACFAC3A3B08F5F66BFBBF1F0C2
-:10668000C78F897A784C841F4A1E0D70FB9D1BE1D1
-:10669000D67B7F4B90E54B9100EEC7457C3F9E6FCC
-:1066A000A376275DFFD9969F61FBF941C6FCAA3FFF
-:1066B000B5BC950270ABE0E73148E876E447142EAC
-:1066C0000DD63872BEF75C5B889D57BC2010BC2F7E
-:1066D000537D46835B953CDB10E763FC30A335FBC1
-:1066E00008DA19A1F8E71C63F5A4D8FB5113E503F8
-:1066F0009CE6FCEC537E4F97267767B8033F481A19
-:1067000090F8BC77C5A6159900EF0A381B89F711D8
-:10671000BDF13DC823C57343EC5ED430C0A75BBB5D
-:10672000F79474B0F664565F9DF46F1BE03C58B765
-:10673000768FAA7A98B567B3F666DEBEC75DBE34BB
-:1067400009E53C11D8EFF99893E1771934B991181C
-:106750000EC6DF6568830B3706E0780FE278121DFE
-:10676000AFE8BB8FA7F1E9EF3C8EF57F761C4D7E3D
-:10677000C1FE84D447E2F38DFC9F80DF7FF77D125A
-:106780005C68D85797B7E5D6431CED9297DF03D3E3
-:10679000B496803C5FB8F531C3EF7AC4DEE354CBE6
-:1067A000F372E45CBADF74FBFA7012B3730E27095C
-:1067B000BDF794437C6B3821FC9E29AAE2A5F37BAC
-:1067C00025A9FE91CFEF2D2F2041D44F4792762C53
-:1067D0000B492796C5A4074B0C33E782ABD487E55A
-:1067E0009FCBBAC6C0E2975B03CFDA44CC3B7813A9
-:1067F000F6C9F9A181E7E1DED9758E95D7C3FC8F83
-:106800002479F83CC286DF5721FADFBF50401F9C35
-:10681000E1ED4F1F241EE95C6FDE4B0EDE5BFB9B40
-:1068200024C443A2DF41BB3FE6DE1B762E5C83C35C
-:106830000AB84987F6FF65EB6ABCC76FE95E17EADD
-:10684000C9C35BEBF0F7AF9692CE7438273C9CDF60
-:1068500023425AD8FD2DDAFD20235A2C86FB4B56B5
-:10686000C4FCFECE32FE7B59CB627F8F8A9FC3DD94
-:10687000040FE2E463C49EE33D9B14FF7715496176
-:10688000FCDF3F893DC7BBB75DC4FCA8D59077A5A9
-:10689000B32F46ECACB218E94BF94D9E5957177C13
-:1068A000CC1FE1B2FB77097DBF5394CCF4807D828D
-:1068B00010371FEF760FB7B7491D994EC7F9BFD4F0
-:1068C000AD220900800000001F8B080000000000BE
-:1068D000000BDD7D0B7894C5D5F0BCBBEF5EB349F2
-:1068E0007693CD6673DF4080201737185244AC6F23
-:1068F00042C4886817A48ADAE2060402E406A58A7C
-:106900002D2D1B122120D6F83522D0842E7829581F
-:10691000F5DBB4A848835D3022DEFA87D6B654ADE5
-:10692000DF827C8A88B06A4BEDC5FA9F7366267B4E
-:1069300021116CFDBFEF79FEF4B12FF3CEBC3367AC
-:10694000CE9CDB9C7366B6B55EB56F608CB506AD4C
-:106950009ADE094FBB2EA8143396975A655E0265DE
-:10696000E6D0D94778189BA69F72C853CE98B141FC
-:10697000BDC404E5BE1D4BFA0D506E75ABCCA440F2
-:106980007B878E3128B31C5D700494DBEC3F73CCA5
-:106990001FCBD8481BBC877E0AEC2CE8817EF76FA2
-:1069A000BF5D87E5D666C6B2711CC5DFEFA1EF54A7
-:1069B000F630C33F6D46998BB122FC278CA3B28D74
-:1069C0001FEAD318AB6E386E89D8E07DA476061B1B
-:1069D000CFD86576F87822D4BF79F57B58DEB6F249
-:1069E00098C30FE3BDB87DEDAFA7417F8620C005FA
-:1069F0005D947EDAFAFA34182FBADDC87640F9339E
-:106A0000FCBB82B1C255EAB1889906649FC17FF987
-:106A10002B12CB4606E552512E4638E2EAA13C0E37
-:106A2000C7CFC2D21C167661BD80D7A9310670329D
-:106A3000BBCDF9CE18C62EB52BECB361B1F2C5585B
-:106A40000694EC3474545901CE9D7F54BC2D507D76
-:106A500060FBC2229CDFD967FC457698C74A73DA8F
-:106A600078961E8377E099EE11E3062C3A373EC301
-:106A700016E68EB51FFD50B3C90FFDB4AD66DEE35B
-:106A800023183307FBAC63701D0F19BC50647729C2
-:106A90006C4E08EA551BD34230CE388742FD253F65
-:106AA000EF5AED79B9C4101BF7AE4FAF9F83EB1BC4
-:106AB0004DB56A3B9473E192DFA9764F00D7D7902A
-:106AC000CFBC29309EC1D99F6B87EFC63C6DF4DAED
-:106AD0000065D3FE736C7A04C61DF3DC4DCC93CAFB
-:106AE000F185F0AA2B8DDEE3998C99563ABDEA2503
-:106AF000D8CE46F4F891CD183421FE57DEDD81F56D
-:106B0000ADDB2BDC9EB1B171D7AEB67B5580B36BDC
-:106B1000B5D9ABC204D78AF925C357E0D0F982F0C2
-:106B20009D51C7FC585F0FEB80F4536F4FA1E752A4
-:106B30003B87BF5B0DCC42F8BB817E5A905E57709D
-:106B4000FA5D9E630E229D2F7F7178361B3BC8BA7B
-:106B500088E723ABDDDE1280A36BC53C37834F2B68
-:106B600097F559AE82F92F4F35DB911EF569231F3A
-:106B70009882F4FE9281215FB5A65678E6C7F5A704
-:106B80004F9BE4467CE875815C6667ACC57E4B8DA7
-:106B90009A83F412D8CABC8CADEFA8AA512F857283
-:106BA0006A205781FAFB3AA6F1FAACC05605EAB75B
-:106BB000744CE7F505815C1D94B7775CC7CB230265
-:106BC0005BB1BCAB63162F8F03187219EBE9B8A148
-:106BD0002600E3B71ABC73BC30EE1300FF58803FA9
-:106BE000249E3F177891F53FC3F780EFDDE2995C73
-:106BF000FF94F86ECF10F57B457DEF10FD3F2BBE67
-:106C00000B0FF1FD01F15DDF10DF1F14DF1D1AA274
-:106C1000FE2551FFCA10FDFF4A7CD73FC4F7BF16BF
-:106C2000DFBD36C4F7BF13DF1D19A2FE7551FF6625
-:106C300052FF6F89F611F13E3FB5FDF500D05D3E84
-:106C4000C82DFC2B4D6DCF40BAEB6A2E27FA6F9DF5
-:106C500008743E3646EFF90AF361B9D4A1527FA514
-:106C6000288FE1F9AAE8BF7259C9BD4877CB5FD533
-:106C70007B910E5B15EF113FF41F58A6F3A2DC5D6C
-:106C8000FEA29ED3F93235C8E2F8FBD524F8B70945
-:106C9000F8DA04BCCFDB87517DD14AB77786949769
-:106CA000C8F7F6C4B219F84983F1DB9C5CBF942E97
-:106CB000AB328F42FD01FA05E5E65D3663D804E3A9
-:106CC000DF6557A9BECD5965C7FA805D25FD73976D
-:106CD000B3CA3C1FE5AA0D845D058C67E77DB7D973
-:106CE000D59A20CA0F4735D54FFBCF197694A36D9F
-:106CF0002CEAA8C4F9AD02BD02DFEF6FAEA2F745E2
-:106D00008E3F39503EBF9CC1F9BF2FF5A0A518DAC0
-:106D1000A9DFD691BE186957498F0D5BA50B7AA0E4
-:106D2000499F7DB90ECB0FB6717D057FA965307E79
-:106D3000091F9EEDBCBDE2A552D467F7A85E8F8700
-:106D4000BF53E3F44109EA2BD05F398E0C2E1F8527
-:106D5000BEEA2E671AF61B709B830F43BF252A736A
-:106D60006766C4F09EE3D07339AF9FE145BD36BC82
-:106D700023513F15B7C7E92786FA32513F25EBABC0
-:106D80008266908F71DF9BDCF684B2DE914AFA094D
-:106D9000648CF733187A79CFF2ABAC2C26AF93F52D
-:106DA00051ABD00F52EEB67E7A49827E907239593D
-:106DB0003F9C5FBEFEE6EA51448720AD3CE797B3B7
-:106DC000AF221DC03A1AFC0AE90FA6FADDBED4F3C1
-:106DD000E3CB60F0D9EDB6F3E3CD90F51AD9150603
-:106DE000BF4AFD9FA357CE8357D9CE687EB0FB38EC
-:106DF000E8B53FBD7947290396590BB8A1F5CFD225
-:106E0000051F8679E7AFFC6937F69F77D0DA867879
-:106E100036BAE777B7E17C3A1E600CE8496FE6F4D2
-:106E200064CCA9B2E3F7AA4E73670C87F2AEDFDD3C
-:106E3000AC003DE9339BBD0CD6EDD0132F655C83D0
-:106E4000F87BD5407C6ED2F9EC6C388143F4B6AE59
-:106E5000C0BA7D03D1B1DF8C78CADF69263DC0029C
-:106E6000DBD76B40D4ADB01C6C32D67F7DBD06F84D
-:106E7000D9A90C94AFC6722868E4ED4144E3FFF54C
-:106E8000E81451CF341558F3714511F5FF59533DAE
-:106E900005DAABF6312AE89DFAFB7ED66EB81CEB1C
-:106EA00075F27B8D4D82F9E278A2ACC2FAFCB44F48
-:106EB000D407C2EDD5C0443D46393E0B60FB1E9D54
-:106EC0008E9703CFB463FF8F5789EF030FAED7F2CE
-:106ED000099E6BF40EC6BEE3E86BB75D1A83F7EE4E
-:106EE0008C97DA5B607E1F782269B09CAC61FB7185
-:106EF00017EAE775739A7D8837247C1FE8C414BDB0
-:106F000087E86960DD76CF0CE441ED99837F4B1B08
-:106F10000B554DFAC8C114C05FC39E66B301BE379E
-:106F2000197C81BCE2D8770DBB6BC99E69EA2DA3A1
-:106F3000E720DF1D5287FD4BDF998D1730DE07E11B
-:106F40005F373E06550DFAE6769B9EDA33BEFE832A
-:106F5000CF4F7EFFC163BFBE01C73BED89B8A643DB
-:106F6000EB7561C0CB20DFC9F68D7B66D2F3D729E4
-:106F7000DA7A07F0752DC82E92576AB317DB87CCE3
-:106F80001D762F20DA62E8F0A1DE00D40775936247
-:106F9000CF8D8E126A9FFC3E99BF4266963903E5FB
-:106FA00078BD4A7A2A640EA48C87F246D887B4004A
-:106FB000486BCA7E37612C969FB431DC97B4D6F704
-:106FC000B9C7225F798D0CEDDD8D97867290CFDB8E
-:106FD0001A8C731E027842E1E5EE0571F6D6DD19D2
-:106FE000069AD7FAE781EF2E86A721E450F0FB112D
-:106FF000A03780942D0EBF19F739969C0C1628C621
-:1070000076B68DC89FEB0DFE9A2A6C97A323FD627E
-:107010001931BBA60AE07067E9143DC1517D6421B6
-:10702000EA37BB1135283B9231EF6788A79FAADE6C
-:1070300066E4C39FDA6CF60054808CD450FEA9231A
-:107040009C412C9BF4AC19F5785E19E8F3383BF6BB
-:1070500088909F471C468277A32534B312FAB12E3D
-:10706000D7D90330DEFA864DFDD3609C1F353C75C1
-:10707000B805DE6F70A90CE1B039D5B011F48FE11D
-:107080005A8011E07EBCC56747F91ACD52D90EA8C7
-:10709000B7961899274E5ED9C642394E4E663A5574
-:1070A000CD02DF9FCDF0BFE880712F79F535337EBB
-:1070B000EF9EA8D321DB8454BECE69E589FDD8A715
-:1070C00024F693519D58EF9C9158EF9A9D58EFFEEE
-:1070D000466239F7B6C4F22C496F20736CA08FADAD
-:1070E000BC8A59231FAE467D0BF8F903E2DF3A5202
-:1070F000E745FC581A1E3AB110EAF3509EE07E684C
-:107100003C23BD7BA0F03B1EB40B4C19CD1EC7D851
-:1071100073F1915760BE06D7CB56A2DA19B4B7BD4A
-:10712000F9DEA7D8BF8DC5B52B46FC6827113FF8FF
-:10713000E7067852F11F1EC477F37F7D0FF5E261F9
-:10714000BD17F19DD7A0D2F8F7CCF604F5DC9E7000
-:10715000A33D9326DAA79937F6EB419EA7BDB97EEA
-:1071600019EE7B93F1EA62CD0AF225D007DF6FD7E3
-:1071700032D21FEB74AC0EE906F708D81F994720EE
-:107180002FAECD34129E1461EFA0E6C07A97B09F67
-:107190008C39B759908FEF3AC8E9FF2E23EF67A0DB
-:1071A0003F0F0D8A24CF504EA666E812FAD9641715
-:1071B0006D4439CBC1CB3D7D19D7205F6E9A9D318F
-:1071C00001E9C484FB2EE82F3DDFAC8D86F9595EC2
-:1071D000340614E8345D657D0658CB1E2BBBD507FD
-:1071E000706C39640DE8E1BD65C17FD8D14E1B9F3D
-:1071F000C1E9BE678DF7372807A2B52AE1D192D53C
-:10720000619F3096CF2100F02139A05EAC1CD1499E
-:10721000769EA5B283F4BBA5ACA303F1B465868EBC
-:10722000EC8D8CDB7444CF9682D0E112F4132CD019
-:10723000D9B1BF0C50FC46E8E487F91D3E1FF60BA0
-:1072400038D7557052C17E6986304EA6C0ABD3B9CF
-:10725000FB0E05FAC9C4FEC6F3F6882787C053455E
-:107260008687E0768A7E334BA0FD78DE4F5B45ACA7
-:107270001FB98E5B6A5810E193E3CA7E06FA679ADB
-:107280008272D5F032E00DD64929341370772D6122
-:10729000B43FEE59E36BDE4E7C6D233F47AE33BF08
-:1072A0000AE928F7D0D659BAF1F89D95C6312C6075
-:1072B00041A4E35C9599BF9A81F68D8FF098CCAF8D
-:1072C000397D1DD7A39D2AD725997F7354D6AECF7C
-:1072D00038978F739CCEAA91E307E1E7247EC939E2
-:1072E00014FD36127D325F6F4B395D867861F1EDAA
-:1072F000F5E72FEBF5A1C3E8E761D9A02700F585F5
-:1073000049E331F64F139615A6F37C361CE5BE43D0
-:10731000D031E82B60D69E09F6A936E4D3658CE817
-:10732000ABEAE98D37BF0CFD9D1D61B4A35E293822
-:10733000D4D18FFA91EDF18FC275E852FD3F4E81A5
-:10734000FAAE23D90CE5F67A0BDF8FA982CE93F53E
-:10735000CBDD197C3FE6413DE7FED79FD23E0C9541
-:10736000B8C6D881F7EEFE8F2B5F3467FD0FDA5970
-:10737000ECD1F51A94F3FBFA5B6C38FE7DCFB79B2A
-:1073800001BF965779FB0D500EA888BF7AF2671D92
-:1073900028584878525F3731A4D3717A2D8865F622
-:1073A0008685A1FCDDF9E437EA3C287F5CD33D28E3
-:1073B00087BA04BF6F15CFE4F9AB46CD8FF644F220
-:1073C000FBCE01B9E43B510BEB38EE4123DB0095DA
-:1073D000A5BA79EDB8BF8BAE07F90BB5F3F49EC62D
-:1073E000BBE3F6B7EDD6CA4733E0BBEED566E6079A
-:1073F0008339FF1385F981390B9CBFAE44F953C81B
-:10740000C20AEAD9C266307891AE5658993F8EDEEC
-:10741000F33F51A97DBB557B34238BBF37831C3091
-:10742000F07FB29F66F858AD93CB28B45F0C8F59AC
-:107430008FA2DC60CE6A6D603F320CE917F43E8C9F
-:10744000F7B498B70170689800FFD97461D3F873E6
-:10745000DBF70A79AE9A6D619497AAED9523245FC4
-:10746000ECEAA9F876B8EF262156CFC82F8B78A181
-:10747000F2B7EC54CE03F96B9A40767F00F7DF81C8
-:1074800034BE1F619AE671BA905F182139DFCCDAF9
-:10749000CDD08EA81DF82D87F55BC86EEE631EE477
-:1074A00007F4B0BD9342228B215EBB18AB89E70382
-:1074B000F9947E0975A59EF653639EB3103C8666CB
-:1074C00016B4A03D84B001BED5152CA816C7FC8209
-:1074D000A50E0F7D6764CD64CF3EFEE95BB928A79A
-:1074E000AD07C11EBB18D7594772CA6A4DE43FC6E3
-:1074F0005A084F27057D74AFB6D33A0FECDFFCAFC7
-:1075000089758EB4A0BE285C9191B0BEB25DFE2795
-:1075100079CC7F497CBF41EA2FBFA44F41BF4CFECD
-:10752000278554DFBDDA739EFE870DD17F0ED1D142
-:10753000D0FDE7537D77F835C775808AAE689FC365
-:10754000E789D9D7C978CE5F9128972FDE935896CF
-:1075500078B11834E74CC0B9E5DB3AEF76E8EF2BA9
-:107560004712DBD514FF96F6BFB1F661E7F5D81EDA
-:10757000F6E7DBE1ED652712DBFB2A9F77201FC7CB
-:10758000DA73F8AEF824B15DF2FA24C30B70657DAE
-:107590003D0EAEA9665342FD9CDA73E0CABA310EC5
-:1075A000AEABDC89EDFD2D83C3754DA9E973E19286
-:1075B000EDBE36E9C2DA25CFE3FA1AD31078E7ED4B
-:1075C0006F9C7361FDDE52F7F9ED6E5D993C4E8064
-:1075D000F8A551A75D9E09CF79F80AED459B95EC7A
-:1075E000DE647A7954E8A76A343CA0BF8BD2B4EA4F
-:1075F0004C785649BE137E86434F5C948D723D4F46
-:10760000F8D199F02BF4D4BBC9AF70B3680FFAA4CA
-:107610000DE545CF4EF82E8DC3156F3F65D6F37D32
-:10762000859D45899FA5BD94C1EC0ADF8F737B675B
-:10763000A87192FB5F97C1E19EBF722A7B1BF8F095
-:1076400029A3BD52C5FDD93685EC81F9D59A3E15E1
-:10765000E86372BB427EA5F977FEE687E88FB9F44E
-:10766000B8674F04DECF0F3ABC386C633FD3304E5F
-:1076700090AD5F56F63D78DE7F00EC1F515E86F4DC
-:1076800066D33CB8DFA84588A09F5386E6323BCA44
-:10769000CD6FDA34949BB5B3B53FD07CFF0156096A
-:1076A000B45BC0A7CE9EEE9C69C47847ED373C938F
-:1076B000D0EEA90D59347A9A996A8579D4823D869B
-:1076C000CF6C23532DF8B432333E2BD670FB2B6D89
-:1076D00092CF580BE3D7F6FEE4CFF8DD2235BC9FFE
-:1076E000DB93419A776DEF8B7F457B6D81E633A20B
-:1076F000BC18B3D3C86D52410FE34289659407F1BA
-:10770000E5B27062F9924389E5F771E1607D260B7D
-:107710003FD6817D2692DB4BDFB792FDB917141E51
-:10772000EE93038F9B487F4C5D6AA3F57AFFA475A7
-:107730003BFAF5F6BF6EA5F64B7E6AE1ED75A12723
-:10774000B01C782285F6D94B3343151900F72F3E2C
-:10775000D513BE715A06ECFF89D1DB3760FD25A138
-:107760000A8C8B3D751163FD58AF06C7E33C9FFA49
-:1077700027F75B477799823BA0DFF79FF9C913DFB3
-:10778000C57177E56528B03E97A15E8076931F347A
-:107790005B71BF31F9FDC786A3DC58BAD39430BF03
-:1077A0009D998A88AB79D290EE86F23B1E5BFF13DF
-:1077B000FABEF4C411A2BBBD86800EE37881F59CAD
-:1077C000CEF65AB89F74AFA53088EBF47426D73B39
-:1077D00097E976FCA811EDCB57B91D3254FFA5EE01
-:1077E000F9DDD583F81907EA61DC6258E733EF5910
-:1077F0006FD5008E519B13D7697430B1FC4B31AFFC
-:10780000792CEE7D31C2336CAD1BE1D9CE089ED20E
-:10781000136FDE5C8CF6B889DB21C9E31ECAE4F283
-:10782000E1D147A11F2E67F4DC0E078C015F2F15F5
-:10783000FCF00B85DBC1F0B7220FE87F291A10C3DB
-:1078400062EF9726C121FBFFAEC0D3C7E6B41DA8E7
-:10785000CF9D464EF727571FFA21C63165BB775695
-:107860006B5A759C5F79E1E665077360FDEB7BB24F
-:10787000689F29DFD7EF7ACE750BBC3FB553F5A2D1
-:10788000E95B7FD3233F988CED76E9430827D6A3A5
-:107890003FF354E8F9346CB7B0CB3101FD25F2FB6E
-:1078A000459BAFD4AAE3E4E917E527C9FFF5627F5A
-:1078B000FCF4A4FE697980EFA59B152F365B1AFABC
-:1078C000FAF5D7A2ADD3A5F7627CA342653EFD04CD
-:1078D000DABACFC6677DCF930773A1BE69DFC40A4A
-:1078E0009CD7069DEF9A71C82FDB0CE4074B5E1FF7
-:1078F000E6E4EB0CDF8775F0FD861B6C75181781CD
-:107900007EFBB07CA074871EFDF8692740BEF1F7AE
-:10791000477420334FF4DE351EF62C40C7B676E4AC
-:107920008FBDE8B8C0711ED7939E60613E8FC9C2FB
-:10793000FFBCF48F9D46159E274EAC49ABE4FC4737
-:10794000EB8442DD09F3AB7B701CF1EBA2CD89FC2B
-:1079500025DB4978170713EB93E9C2E394FE0A5637
-:107960001A4F5FC9ED3267048CC88FF52B419EC753
-:10797000F14DFDF10E23DA5DC9E3A005C9E4BAEAD1
-:10798000892E612C9CAF85CF174C5E33CCF724FE3B
-:107990008BFBCD15DCD72F51688A6CE945ACDA0337
-:1079A000F85C3A8BD5E053CAC3539342E3B1FD5E12
-:1079B00043E4911F911C4C257970CA1E4E43BF525F
-:1079C000AEF0EB9DF284D350CE9D11713BACC7F26B
-:1079D000925ED007C0D7EF7F6024BDD0127A2E0D03
-:1079E000D7EBD413169D0ED6E5FD9ECC2AF4079D49
-:1079F0000ABD9C86F33A19CAAC42BFDE50722259C6
-:107A0000BE497BE028FEF352C6AE746A9A13E51DA8
-:107A100006197240DF643697350FC2F7F23BA7B103
-:107A2000B90CF334A2DFB47951CE5EEBF4D0FB5A3B
-:107A300085F7877F18DFFBE850E60E5CFF43FB47C6
-:107A4000A6A39DF011F3A4A3DC9EEBF2F99CB09EDB
-:107A5000EEAA7E8AEBBBA7336F2B7CF3B6DE7BBB33
-:107A60001DF0761B03BD85CF72BF91FC2D6D5904AF
-:107A7000D77C958555A0D3F9A857C75399EC98F9A9
-:107A80005D4AB015E0B86D63E23C17769A62EB0B85
-:107A9000FF2D6620109181BAE2DA41FF8B517F02FF
-:107AA000FE9698593805FA5DF250E2774B5998E006
-:107AB000A97FEC33D36078FCB3C0E35C97B618F1D0
-:107AC000A8CC32135CDF7A5C21FDE6147EC6E8FDAB
-:107AD000E9418C872D15FA7A81693FC1D37467AD6E
-:107AE000761BD0CD9995F3B5DB3279CA08EDCB364C
-:107AF0002B44874BAB59B800E05BDAAB84C7A13DA0
-:107B0000F11A5F27D92FDBC6DBDD2CEC9D05801732
-:107B1000B41F263FA60452417E2E30C3560EE58880
-:107B2000981FD6A743B98E75D0BC1A5884E0588BDD
-:107B3000EBC8FD7904FF9F5FE3EB37B96EBB1E8195
-:107B40003AB4BF82E27F1F332FAD23D825CC927188
-:107B50002E9D20DEB5383CD5752596D94371E5615B
-:107B6000885728C7E1BB71F767266D103CDF3FA03F
-:107B70004F82A3678E63E7D8BD6F8975B8FFEB0BA3
-:107B800073500EDC8BF66BAEE86012CA4D26FD1A00
-:107B90006133F46FBD8425F839C0BEA2F283CE995B
-:107BA000D337E733B6C9E0A778C17CBDEF2086B6EE
-:107BB000FEE9F2FF04D777BE4E2B54491E682369B5
-:107BC000BFBB92AFC703139A47370FB2CF95F06F81
-:107BD0005242611DCA8367B87D905A1E35F8E3F89A
-:107BE0006CBF9073E9072207F3905E9E54C82FBFC5
-:107BF00045616D0AE0D90DCB82FA608B72F420EA00
-:107C00008F2D577B582BD497EF9EB9EC79DA2B5BED
-:107C100029AFA76177A5BEC146F3E7F66A4AF376B6
-:107C20001DD467DF5A3A01F904E67DEB2C787F50CA
-:107C3000F06D8E8DD3837B4DA07839FA650FF89661
-:107C40003D8FFC3DCE4AFEAF6C33FA7AE9D98E7691
-:107C5000A89BB528D8EEFE34DE7F964E7FEB4C2CE9
-:107C60004FE0E58C558AB68388F83EEA3FDBC46A6C
-:107C7000107E7C8FF63474A7F5507D90E69B3DB561
-:107C8000B90CFBCB1ECE9F4E63381FFB796560BDE0
-:107C9000FD3A94BB2B84FE5CB1BD2A1BE5E42BA707
-:107CA000CC2ACAC357DCD20E0CDBD00E6425A5BC8F
-:107CB000BDD0532BCAA66623FD3A0B13DB9D31685A
-:107CC000E997A0BC3FACA7B8CD9F6C5ABA03DA5D68
-:107CD00066E4F3485EC7A8D0AB4D9F282C18B7FFC9
-:107CE0006F9A7396ECECA64FD484F7A7569B593045
-:107CF0006EFF5F5F77601AB66B60FD6B91AE1A42E4
-:107D0000292C1847E79759071F57D277D3277A1698
-:107D100018745C63E2FB4F32592073B076AEC4F73F
-:107D2000308F84F29EBF0CCC03DFB3499134F487CB
-:107D3000CE40BD06E533415DC000F2E41503D757E0
-:107D4000A7ED91047D76DA13E1FA0CFD3D366E6FF6
-:107D5000CFC47556A369B35263E3C87AFC3E236E61
-:107D6000BEA7E7185998D6274A7020FE02A318DB51
-:107D7000DAFBA111F35CEA7BF713FE24DDC4E331E7
-:107D8000101F3F6AED0FEB80F7C7DCDFB961EC68CD
-:107D900058B20382CF039B36605CD8A5D725F07D0F
-:107DA0004AF9801C20B1733F46B3C81FFAC086EA67
-:107DB000FCB8B2683FF07D60F374AC2F1FCBBF9F5F
-:107DC00078FF9697D65032480797A36AB4D0971A8F
-:107DD000573627956D501E1757B627D53B93EADDCA
-:107DE00049E57CDEFE546AB850EF05E0EFEF9E8E69
-:107DF000F95CA772C27331FF6BA33E38BD1ACA0D7E
-:107E0000E55CCF36F62A5EF2E109FC357AB9FD670A
-:107E1000F3468C98779652DE7F10E544FD1EC5AE82
-:107E2000003FD8423D612AE3779EB8EF420A7D5772
-:107E30001F3A4ADF0DD97FA98EF87D43E931DE2E46
-:107E4000F42EE9F3756DCB28CE2EE3C87AE6D7F28F
-:107E500094581C59CACBD339DA73242FF72976E406
-:107E6000CF013AC57EE3FC37B2FD1BE37A7F8BE698
-:107E700042CA8A0F5BD02EFD63C3BB13D14E7B4336
-:107E8000E8854D4A70348EBB95F947A3DEFB66C387
-:107E900088FD3A68F79621D28DB1B2D5F73F49F8FF
-:107EA0007B2B355280F9742D59E1E9984FF75656DE
-:107EB000A41BF1F9FBACFDBCBE205280F97377DD49
-:107EC000FF3EAF1F11E9C6F2E359BFE7F5E3220514
-:107ED0007A3B6E758E4CAF86FA87ED83F3F5ED59DC
-:107EE0005C9E48F8869768CBB2D00EABE7FAA41B2D
-:107EF000F63666909B73979C7CFC61C0C3DCEFA454
-:107F0000903C7BF8D4F5D3B99D1DF0A915E887E521
-:107F10007FA4EF486EABB4FFCD411D97115B8FD4AA
-:107F2000C27E0FE9838B9A7BD06EC89E3B96F4C1CC
-:107F3000579DDA111C573EBF9F074F687F24CBCE59
-:107F4000E5B35E4771E9ECEFA6929D75AF85CF076B
-:107F5000F886D6D726D6E3EE2CAEBFEECEE2FBB740
-:107F600045CE2BA9BF9B855DDCB93EB8CB02F87F1F
-:107F70005DE6BBDCC7EDEC5BB6835C0139DEE9D0C6
-:107F800072509EDC22F2D7A4FCC0F71971FB8BCE95
-:107F90003228DB62FBC8CE995A8ED5894F970EE303
-:107FA0002F521E7516F3EFA45ECA6EE5E366DF3B43
-:107FB0007A07CE2345E57EA4057346EE6821FD3E93
-:107FC0008BE6CD342D4781FE8E2F1EA643FF925C9B
-:107FD0009FEA12ED61ACBF59F8E7E53AC9F53C22DA
-:107FE000E63D5F0FF601CCF3772E3FCD1FEC85F118
-:107FF000C28F45F6C2115CE3AC187E991A9988EFDE
-:10800000FF3FC2D34B5F069E1A5682BCD05D80BC38
-:1080100010F8DBA4840DD95C5ED0BE18DFA3DE7936
-:10802000CCE97F0BFB97E3CFFD6E03D98712AE94AB
-:108030003B9EAEB9919DCB67C9F6DB09B15ED2CE4E
-:10804000F44A7FA418E7ADD7CD147F78CB1822B9B6
-:10805000F916EC6B5A50BE88F879C57796BE82FB4C
-:108060003AD9EF752E9ED76791EBAEF87A16166364
-:108070003E090B98711E338DB4EE52EF763A787E3E
-:1080800048E79D79941F72864518F9352731928FFC
-:108090004007541FBDC945FC0FED03166CBFF82205
-:1080A0006A0F741120F9709395F6219D186FC6FA26
-:1080B0009B4A8398CF82FB5FA2B7C53A1A77107AA2
-:1080C000E17EE3513C5F42D28DAB95FB6798AA8D70
-:1080D0009F19A7E72F72713F514A79E4C9DFA37D49
-:1080E000BAD142F629EA588AED7464533FB0FE993A
-:1080F0002EBEBF273ABBED07A9222FCD5B81785D4D
-:1081000097CAE9B2CBC2E34E5D600F935C14F42BC7
-:10811000F3E2FCC2DE8BD4E9D2D05E28760DF80DF6
-:1081200034DCC793DF1BEAE74594A3B8FF9A17D066
-:10813000874DB89F6ABF528BC4ED47F00FE376B707
-:108140000AB9CA3633F203DE8ADFA561FFD6348C62
-:1081500053DE8ADFA3DF75D59509F1B84B5C9CBF70
-:10816000257CC972FF120957C7035AFC38B2FFE4D5
-:10817000FE605F59EECA223C87D3717D5BF4B47E0A
-:10818000C970463673FF75647311D19DEC6F283842
-:10819000FF4B1FFDB6027A70E154BEDF96FB9805D7
-:1081A000623FCC5625EED3D05F3250D69F5B4EDE79
-:1081B000F7619C3DB13DB75B52C6468DC4B71E25E5
-:1081C000017E89AFA1F070F317C49BD47B0F588058
-:1081D0000F32703BAD10FD6EBE3385F498D3181C82
-:1081E0008D74B5C0E5A1765B31DF85F42ADFFF7EB3
-:1081F000FC8AF45F24EE7B9BACD16D88AF262B23E9
-:108200007E3ABD2F95F8879544E662BED899BD2683
-:1082100086F4DBA84446A2DC3AAD68B5D4AE25C5E9
-:10822000837C24FD036F3FC5FD034D884980AF2942
-:10823000F077CA576ADA93B81F3E0DFFD501DD9F6C
-:10824000D6452AB03F290FC08ED6C83EAAE3719CFE
-:10825000461D0BE03EEB32DDBCC59CCF73D90E7AD8
-:108260007F74E4F2383B1DDAF529199C7C906FEAA3
-:10827000051E1B75C7A85D3DE61D213E71BF85FE2D
-:108280002EAC8CF3CF366E7C9FF29E1A7727AE779A
-:108290007D8C1E94CF14FC2E8E3E889F03421E3090
-:1082A000EEB7A8E671E854514EA9E9A73CA826E12B
-:1082B000C7C83A1099867225B53CC4E6C1B3E90433
-:1082C000B73726F76E7F0EF7C78E9AFE02648326B5
-:1082D000E1EF93EB2DE1BCB4F73EF25B483B256E3A
-:1082E000DF397A5682FF600D7D87FB581C2F82AFE5
-:1082F00072900CB87EDB24F41BE84192B70B3A462F
-:10830000911E443D85F249EE83515EA19CF8A7ABD6
-:10831000AA07F9755376D563AE2C3E1ED9F5B8A9D8
-:10832000BA74683F9DC48F6C87FBE1CFF3C3F5221D
-:10833000DD66C5FCE3045139E64D6749BF1BC5E75F
-:10834000962B9E6CA4DB77F47EF2AF2D6201F2F7E0
-:108350002C46BF163CEB05BF2F147EA285C23F847E
-:108360007EDBF83822FA4FE3CB4B583F971B3B4D4F
-:10837000B1FC1AF4E754B3702AF4D780FE267C8649
-:1083800012BF6B6451FAAE69CF67A6843865279F28
-:10839000F7AD62FD1DD5413DCA892D16EE6792F2FB
-:1083A00063F22AEE8F4A9FA015DF8574FEA281FC3E
-:1083B00014FF2DD66D40CFBBAA9E42BD62D5F3F30C
-:1083C00068D1BB4C24378F833EEE11FE9159B80F14
-:1083D0005DCD34CC5F67AABD307E9F2A9F1BF65AC5
-:1083E000EA907EDE75E912E8EB472E9ECF437E23AE
-:1083F00092CB29A477417C8C47FAAA1826F5221B38
-:108400008FFEAAA362DFDC7883CD8FFD45745CDE2E
-:10841000FCC9C5F7017F72F17C4E591ED8E709FAF5
-:1084200091F13FF4DFC4FBCFFF3ED0FE3E9177CB0E
-:1084300068BE9B168BFCEE013AD6915C4A19EB2381
-:10844000F97B99AE8AE452F43D9B07F152F37EFD2D
-:10845000629CC74773AC748EEF36E1CF4DC976503E
-:10846000BFD27F7BBEB858CD86D1242F65FB34DCCC
-:10847000A0649DEB07DE2BE4D85EC6E10D9CB0F254
-:108480007C13950550AEED0D8D0E22BCB5C2FF805C
-:10849000F60DCAD7E8937C1D99CAEDA1BDBDE38254
-:1084A00048EF470DFE2D0BD09FD36320FF1A538357
-:1084B000BB1EC17E9ECDF162FECF695D74DBAFA0B5
-:1084C000DDDE138FE661BC67AFF0BBD71BC323C9EA
-:1084D0006E16F98EF569E191E807FA8558AF7A2BA7
-:1084E00094E17DAAC53F2A3B2B1617C3EFF0FDB1DF
-:1084F00020B7CB8F314E07818D3CEE09F8CD5980E6
-:10850000F0AECFA6B81AAE0BAEC3DBFBC6D1BC36FD
-:108510001944FB67146AAFCC2A9D4B7A61832913F7
-:10852000F17FC667A47CDDA67BB9DD385FE7D9B6ED
-:108530001265E5B32934BF059D8729DED1F4834553
-:10854000740EB269C9AAEBD8E7C40150AFC4FBAF3F
-:108550004FB36821ED87EB8685C200C7E9DED15EA7
-:108560001EC6E3E76A1A455EE87103D310EEE83EE3
-:108570004370B0F37E43F58FF3C5FD29EA37F273FC
-:10858000C7C75B481F24C65FCE573E6D888CBC139F
-:10859000C65F9BE9BF293BCE5E6C7A3687E4DDDBA4
-:1085A000F7FCA590EC8A0E1E2F386ED0E6229F387D
-:1085B000AAC3C6797176D8B26C6E97CE3709FB1113
-:1085C000E4603CDFCBFA8AAA443E93CFE66C6E8728
-:1085D000A48AFC8073EB65FED9F526D49FDCB584B4
-:1085E000FD72795D24E26E934F44F7639E557DA83A
-:1085F0008CE27A45ABC2C49780EF30DAFFC7B7A4EC
-:10860000727902D3C47E164E6264BF2ED4F37C8787
-:108610008526B087B91EA7F6EF6CC9263C54ACE19D
-:108620007660F44985E4A28C3FD632FEFDD36D47D7
-:10863000037A685FBB532903D1CA6ADB2A291F6208
-:10864000495731ADFF64217FE79BB4915B90DE9E7B
-:10865000E6F12B188FECEE7ACCF99A4072C988FAC1
-:10866000B06EA7C2F0DCB09C7F72BC8F0513E32D07
-:1086700093435C7EA3DE6071F69AD443A82F589290
-:108680001D9948178104BDD78D789D1893FF84B13B
-:10869000CFD183604F6F43FAA9A8E2FC17ED5108D0
-:1086A000CF0DAC99C787841E1A8047E8B177F45C78
-:1086B0006F2E34DD47CF9FE321B02CD48311AE075A
-:1086C00041AFA15C1C8A2E7E3E045D487AD82DE81D
-:1086D000A3FE040B5F0EE3D5AF62E186F1FC993A8D
-:1086E0009EF432D7CF66AE9FF169BD003D9DAC9F31
-:1086F00093F571B21ECE36727D2BE920DE4F8FF6D8
-:10870000C8E455413DF7C3E6DB31CF4FAECB22A7DE
-:10871000D6979715B3B79A8E98CD9E8BB1EC63C35D
-:108720006CE85FAAF415A0FF5CE5E78D53004FDB12
-:1087300071FD847D7E79015F47B7C8E731A83E5659
-:1087400066C375EAA7FD74348B517EB6C46F772A71
-:108750007C3701BFE3FC38F0BD99B559E3BEAFDA11
-:108760006B21FD72F699543A57C6547F9103FA7300
-:10877000BD01763A944FEF4D25FD7E5AC87BA7F494
-:108780005BB0B5B41EEFE23A4F44AAABCA43FF2F29
-:1087900053A6E7313A6FCDEDC606C7507E7B515FD9
-:1087A000DC7F03A73313E9D9B38EC8ED58067828C8
-:1087B0005FF8BF04FD36ED9E5AF65D8CF3FB6C5EF0
-:1087C0008E557F19DA0D26FD8A1BCC7A3C77BF2A9D
-:1087D0007A27CCA3A1C04679C8D5456FFEEE2628DE
-:1087E000BFB7DB40E715173F7C7D7A183F5335F75D
-:1087F00060FA7971D090700E6EE9CEC4724328B1E0
-:10880000DC9474EE7DE59BDB5FEA8BAB37BB539D5D
-:10881000B4FE1EE6C53C6AA6FF46BA7F1079299FC2
-:108820007F591D7CA96F04E5A1A5BB797E8D11ED53
-:108830009A79480F837C77309BDB352653F309CC3C
-:108840006737FDC244E7E3DFC8F6BBDDE85FD64526
-:108850000FE27A9A8A4E8D473D5855F40F8A8B9DC8
-:10886000FD1EF3227ECE5A2AC9BE39BBC5E2C1FD28
-:108870005967A18DE8A0F35925A870FB7DC6C40AED
-:108880008C83D21C58D3E6ABDFE3872F98999FA740
-:1088900087DD8B1BE58C46FBA977665AED6BE0BB49
-:1088A000BACD5CDFD6B3FE349403DF748BF5D33FCF
-:1088B0006634C33F8BDBB4D12D00EF529F95CEDDE4
-:1088C000A89FAA74DE7C1D761967FF97BBB93C6828
-:1088D00030478C9538FE3F56D4A06B4CFAB94C0605
-:1088E000BF86E7BB0C7BCAC279F06AD1CAE7689F32
-:1088F00033104FDEC7E5D6A23BF7D37B65560DCDCF
-:10890000F71D982FE2E5B92D269AEF3B0536DA6779
-:10891000BED3CDF7BF8BECC6A099EC8D4F32F15C86
-:10892000EC3BDD063A8F7E2E3EAEA2F3A9EF76BD7C
-:10893000407EB877191F37B05B4FF6CABBF6684563
-:1089400018F1E8694E437BB76EF3623ADFBAA85B71
-:10895000EF4379B6A8FBDBBFBA14FD47B36E2EC751
-:10896000295DE158E1F2D862F5D24E5533263D82B9
-:108970007C78C5A753FBAF407BA91BF8A498E7CF31
-:10898000A39DDED77D15D9A58B665A1D382F4FD7ED
-:10899000C3D3507FBC3B3397CEE32E7A5C6178051E
-:1089A000C322C74A17BE5FA4A8BEC1E8E9E36C3D75
-:1089B000E1B5B2C8E60DE377BFD5139D005FDD805A
-:1089C000FAB3A1DB40766FDFACD77F779333C6571E
-:1089D000CAACCDD74DC6F63F3150FB017BA7EB5A51
-:1089E000492F2C5C81FB2A8EB7643E3315AD1A8962
-:1089F0007025F3DBA235CD2379FCEA8BF11DEBE288
-:108A0000E773EF70F3FB23BE00DF7DFF8BF01DCB20
-:108A1000CF48D84F9D2BDF02D44EFAFFCD5EA63D46
-:108A20006CA378AFA680FCFD0906AC27E2939F3BC0
-:108A300052FFBA7CE7AB809F316E7F07F26F11D394
-:108A4000CA506F7AA2F62A3C536413F61CEB32C963
-:108A50007D00D9F79BB2D8231BE2FC0F0FBAF93E79
-:108A600009E4C016ECE7F41FFE7110D7A9B1F0D4E9
-:108A700078F4FB367DF2278A17DA7A79BCD9E68D4D
-:108A8000523CDDE0F4111D4AF9DEE4E5FA27795E97
-:108A900027DD061EE77546A99F17723C54EE14F1B8
-:108AA00095AD2BADE44FDDEA0C5AB87F21C0503FA5
-:108AB000CD98A4E77132616F5D2BFC91E6F2E71867
-:108AC000C6C7D8149EDFF56AF9736A26947F35E924
-:108AD0004A2F9DCB2B7FB07D18CE7B8A41D40FA728
-:108AE0007B33FE8F5649F5CBDD7A0FF2F78C729E01
-:108AF000DFC8EAD2C86FF26AF9DBCEDBE2E0F73119
-:108B0000B3C70674330B98353E9FEEBA29168F2DE6
-:108B10008E7E3EEA506AB8DDEB499F3D8EFB4548AC
-:108B20001F9727E263B9DB48E36ECAAEEC43BAB9DC
-:108B3000E2AB7C3D4E3E6E0AA21C3C29CEB924E33A
-:108B4000EF376EE1A7534727C4ED9DC65021EAC910
-:108B5000F795C4EF96B4EB296EBEB85D614118EF8E
-:108B6000E4AEA70B519EBFF7F0D385F3E2E049FED8
-:108B70004E3EFFE816F42AFC82C97EDEA1FCBBB2A1
-:108B8000DD99CDCC6F1E1E6B7FA6EE6FE4DF9DD707
-:108B90002BFCC39A56E2C4FD90689FDC9F3997D3A3
-:108BA00087B24721BF87F46F1E3BF420465206D69A
-:108BB000CFD25BAC8BCF4B94CFC962DDAEC7758390
-:108BC000A958DA7979A8F51A8A1F77083D24D7EDD4
-:108BD00058FBF074C4A3B1D1A6327EDEAC14EDF51F
-:108BE0006E66F5223FFD45E4A73AADF0043BCD9813
-:108BF000EBB6A13C93E7FBEFB0A6EDC0E75F44FE08
-:108C0000AAD30A4FE8A720B794FAFB8BCE47FBBA4A
-:108C10003BF41D740E3145F049360B2B0A8636960F
-:108C20003EA550FE567B22BE5DAD5C8F446B8DA48D
-:108C3000BF24DE2F9B773BED5F0759AFCD4847B987
-:108C400093F8BBEA9C62E1EF88501CC13289D9716C
-:108C50007FDF7A6980E090EBD5C49B33A55721FB79
-:108C600019F3585232285E1A104F66CB6003F18315
-:108C700014B1DF6549F1826CB0BBB19D8413CA9415
-:108C80000F73AF23D43192C75BC92EC57EF1FDBCF3
-:108C9000B12AF9DBB19D71C2F9E96F804E457EE1E1
-:108CA0000CF9BECE3A687C62069EF3C17500FD8861
-:108CB0007621F31A12CEF974813D8DFB3419FFD55C
-:108CC000EB42656EDA9FF447D07F62AC307B50DFB9
-:108CD000A6E843A5B87EC9F1606857CCF310F21D31
-:108CE000A867E4399EC695537D18A702FB2360C68A
-:108CF000F59BC9D7AFF1CE4A7AAFCC2A6D41FA6A5B
-:108D00005AC5E8BE81A9BD3D94EFD454C3EDB1A6C8
-:108D10003D478D0CE8779EF0E730E17F7689753D21
-:108D200026ECEF58BC2BB20DF3B73B17E7D3B9DDF8
-:108D3000E4BC922F1AEF3C930A08B9382E8E956E38
-:108D4000E67A46ACBFE46F19D74A1DEB2B464BFCC5
-:108D5000C507DE7BD99AF545F2469EBDE773F3461B
-:108D6000D8F4EBB0DE8C56BEA84730408F0E9CCBBB
-:108D7000B37828EE35508FF72998F72822EFE4ECE6
-:108D8000B5579650DEA8E8AF6F23E67FDF6B610929
-:108D9000E3C5C3A726F56F80FE6D1ED9FEF83557D3
-:108DA000AA14FF15F04FDD88E7FAEE3524F64724C4
-:108DB00028CF119A63E3F9BA7E70CFC6FC983E07BC
-:108DC000FDBE3167624CAFAF7B7D46C7C51EE4AFC9
-:108DD0008F290F57EAE72627CF234996630FE470C0
-:108DE000790E76F13454B9EBE62CA3FB0706E2BF0B
-:108DF000BDB51ADAC332FEDBB4CA47F9B8600FFC5E
-:108E00002887EC8153EFEC6768779EA47D41D327D8
-:108E10002AF713815D81F7C9987B2BC91F8A69A640
-:108E200023E2D67F89D05368C3233F3475DDF8B081
-:108E30001EEA3FCED11EA27E0D83DF27B52F87DB32
-:108E4000F14DA5555B501EB08714BACF6943E94771
-:108E50006477343E73E5C4F87CF2C57BEEE7F9C86D
-:108E60003B0D83CE7F5F0E8F0B373EF324F93B4FD4
-:108E700006F931983A35B81EEDD0BA3A1D5A5EACB3
-:108E80003C587B13D90373601E30AF0773387E9A4A
-:108E9000765E1FC0FCF626F84F81575B7D0B695F3D
-:108EA000B0758ED986719CA6D279CB88FEED560D11
-:108EB000E79F0C672CCE6CA573C81BF6186AD08E82
-:108EC000AA00BBE9E7006F41C6F41A2FC8A53C7D94
-:108ED0004FD9B76C18771F5C2FDF92C7ED8036C56E
-:108EE00017F85A39F939597C1E4FD11E6E9FBD961D
-:108EF000C3ED43F9FEB51C6E374E09F44F459A7B1E
-:108F0000568DA4A09DDCC4B40F71FFCB7C360FF945
-:108F100077198FB33B577BC8BF6B7646EEBE98EC94
-:108F20002895E2CC727F71FA19EE17BB22D77F1415
-:108F3000D7B1421FF9E1D7106F77ABC24FCCE54CE8
-:108F4000E1F5B609E8C7B238233FACF150FE0DF9A0
-:108F500025D22F6FA37578D6C9EC889FA9815A5561
-:108F600089D333526E4C1D3887E324FF6915176B84
-:108F70006C04ACD63B6622D1B6CF326376C2A17FF9
-:108F8000CC56F1A5B41F74663FED73AAE7C0BE11BD
-:108F9000E9726DF4A00EFDF5CE7EB21F1B420A8D64
-:108FA000D350FA33CA8F5B2AF2B006F2A1D408E597
-:108FB00087FD3D2745E8C7364E0FAC9FF6C5EC311F
-:108FC0008E7FD09B943716B3E35BF8BD67A23FA3B7
-:108FD000883334083F0E208AEA8DB9C2AE137E8DE5
-:108FE000589E1B1F97A99E8A78BFC3A699A04908BF
-:108FF0002E4F1AC2DB6EF5A5E7025CC7EA7484A2A5
-:1090000063ED2974BFD426A55F437F64A08CE7C5B8
-:1090100026D351891837FD40741AEA93E83343E5A3
-:10902000C5F23CD82D132FA27CF2F23D1F4E43FA1D
-:1090300060358CF8B171CF85E5C58E16EBF1A5E7EB
-:10904000C57A156D073C2FC97524E6C57A39DE65EA
-:109050007C32391FF6744E58E5796B916D0FE3FE43
-:109060007B8F89F23D66EC79E108FA276798598889
-:10907000E2B54976C061E7F55310DF673E7867DBFC
-:109080005D0CF3A29FF2F27392897A7D28BB9E62F7
-:109090001671FBBFEBE4FA7F4976BD94BB4D629F2E
-:1090A000F4BE12FDC1489CDF3EBD7DB0732DB7E418
-:1090B000CA38D710F91CBD83E773C8735F3591E2D6
-:1090C00084F8D382017AFE62F1AC3AD48113CF8D59
-:1090D00067A9223F4B55B808600E9EBF23E3596A2B
-:1090E000CF688A539962F1AC301B249EA58AF8D0D0
-:1090F0003A83564BFE967D260FDF0FFB480EB5F5E3
-:109100006479514E352D39F9041ECD571DD3DCA895
-:10911000FFDB04FEEB2F3C9ED5923BF1DC78D6764C
-:10912000617FBD5DAA0B1B01AFDB1997A3815E199F
-:10913000D7D2D1FE347A4F01C1ADCC3213DC6F3FB0
-:109140006BDA817EA6F9325EF52CF793CD1771A903
-:10915000B7678D243FD250789EDF9EE8F7FF21E26B
-:10916000398BFC78E46FBFFD3F66929F7D21FAE961
-:1091700087C7CE2F30E1AFF3B4F3F3ED9E9D0ADD48
-:109180002F8A64A223DBD24EF78C2E0571B81545C9
-:109190006800A8E62BF05AD12968D778DAA00CC667
-:1091A000BBBA5E0DB8A1DDF62329E41F5CE7F488A5
-:1091B000FC331E3F0E6C54822378BF74AF58A04D11
-:1091C000A7613F3FCFE57EA59773B95FC293741F38
-:1091D000419B41C481C5782D0CD61D9E3A853FD751
-:1091E000897BEB92F121FB6B33349BD14F172DE040
-:1091F000F7939C356A73C87F9C3192EE216A4B6D60
-:109200006EAFE1F5C4B3672D511FD55FAE72C39247
-:10921000793210DE5DB922EF2E09CF0B3A12CBC99D
-:10922000F19BE47353F3997F54CEF073CF15ED4265
-:10923000B909FD9FDD502CD6C54BF1903683E7D799
-:10924000C51407E5F70CB5E473BCE90AF87398A3F5
-:109250009AEE8B037EE1F618E3F00FBBDCA920BF8A
-:10926000B43938DDFEBB7027C3FB9BDC91445F6DD6
-:109270000ECEAF6DEB9520C71787FB42FD1D1F4A31
-:10928000B9F425C9C5B715EF23E162FA8EE443E0CE
-:109290001E03F1DD5E0B3F0F29E51525E8E03E5288
-:1092A000EC5BFF2EF4D6FC136BE9BEA0AD75C3D208
-:1092B00030EE39F57A1BCDA3F1597EDEB66155A4A7
-:1092C00010E9BAB12A32B27910BCE200AA94AFD048
-:1092D0006E9E93F17B67DA13E378C9F1D9B5999A59
-:1092E00005E33FF7EBDEEE7901D7BBC7427AB271F7
-:1092F00055F411F403DC9CE9B7E7017D9CBAF3F562
-:10930000698A873E23BBFCCCBE51744E705E5BE223
-:10931000B92BB631313EC8DA33F8F9B2CEC4F7789A
-:10932000BE28E1BB73E285DC4ED964F48F463BF284
-:109330008AAFF27C880F16EB18AEEB0716BEFE81E3
-:109340007B5285BCF68E8CD707E3F2865A5F68376E
-:1093500016E3F23C0F54B66FC0F58575AD17EBFB05
-:10936000C1935F1989EB7BAAE72B23717D37193AEB
-:1093700034E48F7FBAFC6588AFE357FAC8CE93799F
-:10938000AF174A775ADEFFAE3EBE56E2E50BEA6300
-:10939000FC8BF77F3CFB0F7DC042FA859F338DF934
-:1093A000E14ED27D5B673ED129288F87EAEFBF85EA
-:1093B000DFC96D6601F477545445E8BB8ABFE918EC
-:1093C000DA75D29E4D86DF2FE05F96A7BD9C83F3B2
-:1093D000107EDB3AD1B739F831B79B1F52C82F6BDB
-:1093E000F604D226D33E69C1257A922F3FA7730F88
-:1093F000AC57B1E37E63F1432D547F7ACF7CAAD77B
-:1094000099C361DC5735403D96D74D49CC6336EE64
-:10941000E6711DB98F05385E4038529C5123D267E2
-:1094200023DAC90062A3CAFDD78D4EE60D30B46BB6
-:1094300013F77D323EBBD5C7EF73D9DAABD0BD4E43
-:109440002EA3BF381FD735294EFBFD3CAD3B2F2E39
-:109450005E3ED7A505B0EC34B242C4D3BA3C8ECF41
-:1094600088419EBF4A3C0F7868FF0D640FFD99F953
-:10947000D207CF2B0B26C4D1178A739B0BC5B94DCE
-:1094800094D3E124391D5FAE8FCB2B0B0F961F10A9
-:10949000975716FF5D7C5E5938419E7588730CCBDB
-:1094A000297EDD0474BE72428C0EEB99F8DB1C7DC4
-:1094B0009BCEB1EC34917FAC5EE49536D51DA37D97
-:1094C00047139E8BE1FCA8F173D1DC1EAA87FD1C1B
-:1094D000E5D78612F34F770F2937FEDFF8C17F29D2
-:1094E000E581E047392F398FFA5E85F34F129CC929
-:1094F000FBD8647FB6DC875EB0FFFF7F592E4592B4
-:10950000F0F0AFCAA573E20225D134EF97101778B7
-:10951000CFD3E142D7A0CC036EDFC7F380A7E96DBC
-:109520001A8F43EA799E42723CD6338DE28D32FE29
-:109530006B7E4A1F5C534CEDBD98BFD5B02F95F2A2
-:1095400006EA3C75647727C72197B09E69B8147FF7
-:1095500066AFD039AC7F3BFE9F2FEE09F6B0E22F0D
-:109560001AFFCFE7FBAE0B8A433E67FB38D31F479A
-:109570002F5563C1801F3B747E56413E5FFF14919F
-:1095800027625603CC11F7FD50DF8DC8E7795FCF16
-:1095900089BCA27B5353E81CBEDBC8CF1DB8753C09
-:1095A000FFE9E31CDF2884DFECE1EBF9E3676E649D
-:1095B000788EECC786109D8B0F34D8BCA8C7A4FF4B
-:1095C00048F6DF9EC3E1BA503E9A92FFE5F2D1F928
-:1095D000E4C7B47CE58BC5D136030EE2F82B991FA6
-:1095E00086FA6E28F97263BE6F16A70B6D3CC51F15
-:1095F0002E502EA59483DC463DBDDBE4C1FD03FA6D
-:1096000051483F6ECC91FB6F7E4FC0BD05A4BF3E5D
-:10961000B0F0FD843CC73380BF21F1FDAFD979BFE5
-:1096200073F9EAF3D1BEABD4E81CC0BA54AE5FA262
-:10963000BB781E50F2799664BD22CF63C8F1BEFF9D
-:1096400025D3C31795AB77CBF1FF4DB90A7A96F6C0
-:109650002F43C65BCFF93E20F231FB3591F742E74D
-:109660001A245C4DFD3C7FEE47827EE5FBEF09FD51
-:109670001BC9D7BA90AE4EFDC16CC67866793997D2
-:109680009F8D3E1BC5031A433C4FA67115A37DBF9A
-:109690003CB73AC6ED7F04D76FDDEB36BA87B471BD
-:1096A000CFF6F6619447E027FBEEF41FF8FB37B2E4
-:1096B000FD8F62BBA6559184B843C5671FAFAD2926
-:1096C000277869DFEE34259E077A259FEFC7E5F3FB
-:1096D000C501FCC2FE04BE3B55C7F3B59B9C9ABDB9
-:1096E00092F207B85F3BC5D34F7EA0C6DDA4241815
-:1096F000258F62FD77F3896E1A775796D17D002109
-:109700004B19DD27F306BF7FE9D49DB9413DF783AF
-:10971000EF477853CB8357A39D5904E3A0497AAA16
-:10972000E7EA32F20F26F19DE4B78173A0B7988380
-:10973000AD4A8C1F3719B89E94FAAD27DFC3FDCE12
-:109740004E9107D83B932DB0C5CA3667627EE4B20E
-:10975000BC2B7B707D7AF25511BFE6F1F26233ECDF
-:109760003E879D4B87C5225E3E53E439B0803996D3
-:10977000DF30ECFCF172099F2CCB7879CA27E2BE6E
-:109780007FBB91E822B59DCB0D06748176F6946877
-:10979000FF543C7F55D2199E82F84A47F453BE6964
-:1097A000E4EE8B310E91A94EC138C4B695130E600C
-:1097B0007C545DDF7F392E8DA7C35E855BCC316E17
-:1097C000DFE97CB2079B4B91FEAB7E6BE07989EBC6
-:1097D0005348DF7716D6535EE2E9D74D09E76D921D
-:1097E0009F01B6C68D7EA361EDBFA13840EA6E65CC
-:1097F000D07CD371053691B7B8C68D7EA8D4F6FE5D
-:10980000C024F4ABDCA3F0BB1C017AC58DFB7F55F3
-:109810008776C7FC3DFCFCF6FC0E479599E4A9C28F
-:10982000E328539C2427D5F5D7E8709FA6B630BA15
-:1098300037ADA480DF9B3AA2D3AEC375FFE5A7FA8C
-:1098400041E3639905B13C37445783297AD05D1CC5
-:109850008BEBC9FCB6A1EE2397FA28D99E3DC78EA3
-:1098600015FA68C09E4FA2E3A1BE93F42DE9F997C3
-:10987000064676D82F15339DEB9274DD26F3F53F1F
-:10988000E57EDD229137736CC3DFC7F373EB322EB5
-:1098900012E4F7711A226BF3085F91AF0670DEBB1A
-:1098A0001DBAC6B1E40F6BA47ED6F3FBCE8ADA876D
-:1098B000AF99548E4F3B530084637B9716215F060C
-:1098C000800E460C42071FE5F37327EAFA145A3755
-:1098D000F53EBAE999A90E17AD9B7A3F5F9F53F900
-:1098E0007C3E322E2BFD96917C7F55C1C4B87358B7
-:1098F0002BADFC1C9638E79BBAF2F5C7F17CD3364A
-:10990000E13F3EF0EC18FA9D86B3EB5505EDD4B37C
-:109910008E5AFA5DA26B0BB8BD94AAF633BB2D9E8E
-:109920003E0F507EECB07D3CCF4F15E798D5F5CE7D
-:10993000ED88CFAF3AFD94077C795B987ECAE059F9
-:10994000FB718AB7815D44E7554F3EA348BB284170
-:109950001FCA7D5BF27EACB6E07FD64EAA2F48F4DC
-:109960007B5CF03E8B25EE3707DACBFD63F27E227F
-:10997000E9FBA1EC1FA60512F25D568B3C68A9DF3E
-:1099800073856C94793003E79659D082E71EF29183
-:109990002927C6F28198C813DAAC58BD682F0D95F7
-:1099A0000F3490AFC39A2FE6FEC8E6AFE053E6133C
-:1099B000C97C210BE68D649E9B3762C1BC914CFC37
-:1099C0003D0B7EFE59E67DB41A3C944712F81EA367
-:1099D00078A032AB86FC75193E23D1DF1916DC82E4
-:1099E000F7B90766DBE89C379E0B42BA8F2A6EEA0E
-:1099F000776A8D26DBEBB0FDC0BD80B58CEA334ABB
-:109A0000B41CB4C32C508FF7150F9C7B5EC0EF4F76
-:109A10004FCE1B91F94B329E9B3BEA2905FDA2E8F4
-:109A2000F6A73C826F89EF8A793F9DDFF490DC7066
-:109A3000B5F2FCA4E8A5CC8E7EF92A297FCC89EB6F
-:109A4000BA49F117237F6EB2F273FFDDCCDBAE872C
-:109A5000F21D05C3B85F8779F6EB486077D0EF2F2A
-:109A6000743AB5A70AB262F424E1629BF9BCCFE074
-:109A7000392F2536DE99C57F2B44FBAAAAD7C4E926
-:109A80003269FCAD03F7AE042DA84F5E2E6044672B
-:109A9000DE247B573E5F96FC26E4B21C7FA8F94982
-:109AA000FA3C9F1D2FE96F287A0B5489757A2B8514
-:109AB000EC0F496F0756EFA47B01FB5687E879C688
-:109AC000A284F4783ED6129D8B92B17FDB9FAEC309
-:109AD0007B39CEA4460BF15E8F377FFCD7AFE1BD5B
-:109AE0001D67B2A26F61F954E1381FD58F886EC32C
-:109AF0007B3E743FEEE1F5B89EB960BF173CF2B50E
-:109B0000808DEEC95ADB8F7AAB3C291F25E93E8256
-:109B100014F17B3ED93623D993D922AEC7AA855DED
-:109B2000CFF8EFA2B5E694511CCFC63CBBFBB13ECB
-:109B3000DFC4EF2D6040FF583FA298E735303E6FFD
-:109B4000962FFCD32C12A0DFE72B76D0F703727C84
-:109B5000B749C4A7F8F8879FE47144999FCB98BD93
-:109B600000ED219B872594E57D1E4CB517E0F9FD9E
-:109B700056E9F713E52753FCC6C238BD7CF8CA3B4B
-:109B8000C6D2EF843CF5DD12949B571913EF59961A
-:109B9000CFE78B389D9C11F70936A5F8D30B61DD13
-:109BA0008FA4CC9D8657C3CEC9AC343AC87EDBA502
-:109BB00047399525E8C3319BC3E7A8F629F8FB1C74
-:109BC000F23EBF2CBF4A7E02E6EFD4A35ECD3AEE52
-:109BD000A3BCBF7A73B4107F47E505B33F0FE13CE8
-:109BE0005B7BF4768A17E61E7E0BF3340E1B3AA6D7
-:109BF000A6A11E2916F742604016CA07F38A683FDD
-:109C000038201F462814CF9C319B9F5F9DCE422A4F
-:109C1000AEF3343B3F4F35ADBCD8DB0AE3CD107912
-:109C20001ED38EF8D250BE4DBB31A2F27B2BA26A5E
-:109C30007C5E857C32B7C113CF0F577BE2CA0CEF35
-:109C40001D4E2C5FEB4D2C7F6DD2A7A3E2CBE3140E
-:109C5000AD02E7F90B45DCFF00F285CF8BE70F3E45
-:109C60002AF67363DCCC5C84F98D4E2580FB85314C
-:109C70004FE7529CE5E9498CCAAE9DE61DE6F8F92E
-:109C8000DFA7E37168E10797BF338475A86F9FFA78
-:109C9000838BF0E5B281BC7592F4217A3B20F8F613
-:109CA00080E0D38A3CB315E5FF0183A78BE83CD560
-:109CB000EC413FD5FE5423DDE3DABA8CFF4E8192AE
-:109CC000666646E8573F8F97A11DD80650AE3053C1
-:109CD0005EC801916FDDFA3D95FC5C588FF7EBEAA9
-:109CE0007F6025FF76755AE937B05E9F66A4F30E54
-:109CF000FB532BFC623CBA5FFEA15473187FEF202C
-:109D0000F93ECDC30817E20DE07A98C341FCA8AF35
-:109D100030921D2ECF9F433F147FD3E79A69BC0337
-:109D20000EFB7EA4BBD6F7C8D283FA491ECCE392C1
-:109D3000F45D9D36897E3F04B8AF24FEBE74BDCB72
-:109D4000EBE1E766F9EF62940EFC4E060C0BEDF0CA
-:109D5000378518F12D8FE71548BC3355C3F6394CBC
-:109D600096F9B931D740B952A5FB7F14596EA1F2CB
-:109D700003A25EDEFF79A890CB29A5F785BF22DD7F
-:109D800096A4015E609DBC29839F5B7AA090F3ED51
-:109D9000B9EB57E146BFBF82F31C1B9BFF0187D77E
-:109DA000ED8B2B0FB22E41A4B7E4753960F17AD058
-:109DB000CF76FEFE385EE53CF4B91C9F03F3C81C69
-:109DC0007C1E87C43C42E29C7572FDEE426EBF7EF3
-:109DD00089F31C94FEFEE579BA12E7F925C2195100
-:109DE000BE0438F585009F2D061FFD0C5805CA4D91
-:109DF0004E7FD3459E322B4DCC4B6293BC666E2F6B
-:109E000026E6215DA574B5A17E7D40C4B95F107CB6
-:109E10007530E5FB25686FBD3077641FC9DBF496AC
-:109E200036642E299FA5FC3F9B73B402CBA007DEAE
-:109E3000443D73FBB0C373B1F33EC70325A8AF40E5
-:109E40006EFEB170E2B9704AFE1D8017F817F9482E
-:109E5000F26F32FC928FD875214ACCEC66617ABAE7
-:109E600019CF8307BB84EE2B679E82D8FC80C9A7DD
-:109E7000999BF93C5A0204F7558E1F52FEDF598F09
-:109E8000FF23846BCEC51FD27D48CC5D3B0AF5080D
-:109E9000C0FBF1FF26BC209F72F0BDB4F393EDFA36
-:109EA000F3E5834B3893E5A1844799B593ECF82605
-:109EB000B0E379BEB842F2BEA94EC7E5F01E85EC0C
-:109EC000FA46D033A8A7E4FDBA578CB4B6E1BD8FEB
-:109ED0007B0DDC9F1A78D2E449BC2729396F5CECF2
-:109EE000275631B95FE0F74134D8F93D4842CF7485
-:109EF0007E7B98BC2789EB43D05309F724D57A128F
-:109F0000EF491A62BF00FB02B2CF58BA4EEC0BB851
-:109F10009EEEBCD4630F30F23FF3DF7BBCC928EC6C
-:109F200041C0852B768F1BEC03E87EBAAF14158BEE
-:109F30007BB282FCF73584FD9FEC8FFEA7CB3FB947
-:109F400008E87DC158AD107FEA65BE91FB9B81DEBC
-:109F5000BAFA19A63F363F84F7955ECD9A5FD30DC6
-:109F6000277AD3B0FD9C311FF27B4C63F456599491
-:109F7000C5F5122A99F3F1F161A77F7AD144C45F44
-:109F8000E80DBCCF7C6BAF89F02DF34B93F93B0E02
-:109F90009EE3060E8F53AF2778660D06CF85D07DE2
-:109FA0003C5D65334EDF43D13F9EE3489D10A3FFE8
-:109FB000718ABF16C71DE083B57CDF750EDC7A1B86
-:109FC000ADF70D37F1B85C538ADC276B33725CE870
-:109FD00087E4E3DFB09ED3C50DB53C8F68666F03A1
-:109FE000C5E158358FAB79E17F08CF0121DF663BB2
-:109FF000CB0C487A7F66DF30A09F73F68CC4F8DB09
-:10A000001CF35514EFBB61B621E1F72A251EE68843
-:10A01000DFC39E93F43B95C978498EDB0DC80331AD
-:10A02000DF3CFCFD1678E6337E7E2647FCAE585BAF
-:10A03000D1C0F9DE515F30BE7777D11788EFF519BF
-:10A04000A2744FC3F3598BBA9601DF8CFAD158BA78
-:10A050007FFD4AD7E287EE83F24FB65E44E5E75DC7
-:10A06000B7AC388CF5DB4652B95AF7E15CE483D2E1
-:10A070008A9BA6E37DF57D16DE8FDBEAEFC4DF3138
-:10A08000718F1F3601F380AB8D516A77CDC50D9767
-:10A09000603E54B595975F29FBFD042A0F13E5092F
-:10A0A000BFB808CB7DCA8773078B0F8E2955C2F8BE
-:10A0B0007B65D519BCFD8C09BB72D15F545DC5CBE6
-:10A0C00063BC95EB8763BDEEA3B983D923CF140995
-:10A0D000BF91B0AF7D82DF9FD68EB6E179409F4DB4
-:10A0E000F1E2B90FDFA4A3FC7E3433CF2BF1696515
-:10A0F0002ADE9F59A5713FEF545B4B0ECAC5EBFC9E
-:10A10000C672F4E7DB6DC56D6817A74FAA9C88EB94
-:10A110003DD5CC889E80AFF6E13ACCF9CA878569F7
-:10A1200048CCB644BE92743B53F2537522DF803C58
-:10A13000788ECB83447E807E0F11BF5E96A8AF06DB
-:10A14000E47D12DF26D3E39076014B9483313A0D00
-:10A1500029F1F4D98DFCCAF9F70F088751D7EFC15F
-:10A16000F7458AF7224AB419C2BE90F0A1DB924D9E
-:10A1700038172EFC53A53DCE21B0DB5D382EAF87BE
-:10A18000EF34FC713909178CFF1EE1672D87A75B3F
-:10A190006916BF57C2F761D2DFD128E7BB2771BE6E
-:10A1A00015567E7F811BFD3D14C329BBE8F3E06E8D
-:10A1B00012FA77B6D9778F09E6F075C77C5AE71B94
-:10A1C00041033A60FEBB52FC7F4778F4BAC0BE88B8
-:10A1D00082BF37A2513E0CACE33FF83AF275917062
-:10A1E00025E3E3FF02863CEC3E0080000000000017
-:10A1F0001F8B080000000000000BE57D097C54D592
-:10A20000D5F87DF3664B324926098484409824644E
-:10A21000830426611164712004A3020E8B028AF864
-:10A22000C21AB20B5D624B9B81B0A9684345A5166B
-:10A23000754040B0408302A2463A2C2A56ADA94B45
-:10A24000EBD2F22548658718AAE2576BFFE79C7BA3
-:10A250006F66DE4B52A45FBFDFAFDFEF0FB597FB3A
-:10A26000EE7ECEB9E79EEDDEA9B43B02EA00C698C9
-:10A2700087F5ED16CF9802FF642EF8EF80E57C732A
-:10A2800016A33FFF4865ACB7096AC44279E3EB5FA8
-:10A290002B587F5583C2D218EBC59A12314D64D525
-:10A2A000944F60EE35AA8AAD7AC57CD69F31FCE723
-:10A2B0003F6E60AC2E12FED18DB1D63C9B7F330E2B
-:10A2C0006286FF0633F6567186FF7EC85FB238D6C7
-:10A2D00028D19057589619EAF99470F7D614C6BE4B
-:10A2E0000A8B1AC0E07BB7704807323662CE0F2661
-:10A2F000B1A88EF3ADB1F37A3F0C8FDA8CE90D196A
-:10A30000E12B4CD1D83ED98FF5BB85433A2038FF9D
-:10A31000AF4C4CB3C37C7FA8C23A545C47EB32339A
-:10A320008CF704ABA7FC68172C7A08633DDAD7E3F7
-:10A3300053BCB98C594DCADD5E07AC09FFDC104C2B
-:10A3400047BB4C8C752770290CE65529E1E85298DB
-:10A350001DF27344BE52C0BB9BD5D50BFB31C279F5
-:10A360008EDDD642F05D53E869B607BFB3FAC73C4D
-:10A37000A1FD74554F01B826C576843FCC9FE637C2
-:10A38000B1A6C07B320EC717F8B83792F031F1DEB4
-:10A3900031F45D9992A534C3BC0A8A5C94C60EFE62
-:10A3A000BD99E5125E6634E404F174B2BB76B30B7A
-:10A3B000D76B6E1E321970FBF69067F234283F6E31
-:10A3C000622558CF089FDB113E433AC247C2C308FB
-:10A3D00087AEE6BF2FC23BC305FD5C509A8662A1E3
-:10A3E000BDA753C05D4B41FCC43853C6C420DCBF7D
-:10A3F00081718732360D8B00CF0FC66B1AB69BCE9C
-:10A40000BC8566586F6C9166D11C349C09E7B3D843
-:10A41000C9E753A83A882EDB762A7E1BD41BE7C9EE
-:10A420007E6C24E4AB8E59981FCADB18A7DBB68D6F
-:10A43000AADF07F4B2F08DE78706E0D3A7824E3398
-:10A440003798984BE203FECBF68733575630DF7FC1
-:10A450007BAC2E9FDBD053577FE081545D795EA0AB
-:10A460009FAE7CD0B17C5D7E48D3F5BAFAD77D38FB
-:10A4700056971FDE7CB3AEFE88D35374F951AD7787
-:10A48000E8EAD785C1FE1988E0F63465015CE60983
-:10A490003CDD70658EAEDDB9A8F1C7705FCD5BBBEA
-:10A4A0007002EEAB31AC4CD70FABB79C40BAAC8668
-:10A4B000BF88CF05CC1B1D007815B2D6D792007E81
-:10A4C000957EC58D705BB881D793ED161DB8676C0E
-:10A4D0000CA67EFDF732660EE6A19F9A3F6DFAED5F
-:10A4E000D190F271CE6213D2DF465764B7CF2210FB
-:10A4F00010ECBA7FA89DE2D71D40FCBDAFBA6DF04D
-:10A5000069F11B2AED83C5BB143F837E33587A342F
-:10A51000E6AB8EA9CC0FF83FC5AA1F1D09E957B5B8
-:10A52000FEDF1E4D0FC2C796A0C773984B8FE788FA
-:10A530002C3D9E23DD7A3C470FD3E339C6A3C77376
-:10A540005C911ECFDDBD7A3CF798A1C773A2A6C768
-:10A550007352891ECFBDABF578EE53A3C7678AAFA0
-:10A56000548F3F03FE25FF4D5BB35857AF9D0EBC84
-:10A570002513304DAFFF91AEDF32B5DC0A1868A766
-:10A58000071FFC457AC864CC1D003857021E02AE76
-:10A590008E7450D2B86E55D2BF40077F42FCF70F81
-:10A5A000C1BF3A2B5AEB845FCB54E23557F19C4044
-:10A5B0007EF6A54BFB0BA633323F4F3603DF60DE42
-:10A5C000E24C6F6490EF3116606C68907FF5C6B511
-:10A5D000E5333A8FCC4383E751577CADC3393A49D1
-:10A5E0009E3F5D9CA3AEDE413E0800F988F95E699E
-:10A5F000A641D69A701E33055D1F0EE77479198B3C
-:10A6000086433DA8330CE6F511CE1BC6F928BCFFE6
-:10A6100051DCA777B0060BF63F8B35513A9BB5520C
-:10A62000AA31A715D339CC4DE93CE6A5F475BB6634
-:10A630004B017894DB9B873298FF97C5BF3FAEE014
-:10A6400064DE8AC3C9760957C9AFDFC37F42BD91B3
-:10A6500029DEE814E0BFE3ECAEEF3D029F0EE339E4
-:10A6600081FC77421CCD9799BDB953723BEB67399A
-:10A670009D1B2F2B9A867CD79768776F85B5F54FF2
-:10A6800062F6443CE712FCA953003FC929FAF3B72C
-:10A690009FA0895D3D1B16C7201E993F16CF876B73
-:10A6A0001DB75F8A271DD72FEB5F6DBD566BC33D6E
-:10A6B00038CFD60A877B33D0E7FB021F4FDF6E0B04
-:10A6C000A851413AFA3062F66BDD016F5511DA207C
-:10A6D000EC7FC6F49B56615E391CE75A0CF3BB5401
-:10A6E0000CF0E6F0BF8EC35FEB130F4BBCD05BCB1F
-:10A6F0008C46F87B39FCE11FB9DE4EE7CFE753A06B
-:10A70000F0F1F745681EECE7B0A929D98DF0303794
-:10A710000DC576CCD19DFAB960E570E90A0E6323C8
-:10A720007ACFC275CDB3D9DC2AF43956E1783D1918
-:10A7300077F7EC2AF8E77C93373EA0EAE63D09F18B
-:10A740005DEE2CEE93087473C122E66DEF2EE0EE01
-:10A75000CAC17DD5D5BCEBB07F94037FA2F8510E62
-:10A76000A43F907FC117E3BF1FF236D3E5F7A7A23E
-:10A77000FC926B726F86A28DE1D035D0FB3B02DE7E
-:10A780004F58201F4BDFD7E0F78470DE3EE1519336
-:10A79000BF0EDA7BC7BE48787ABAD241EB29662E63
-:10A7A0002B6EB2B9CC4374FF97317F7BA519F05162
-:10A7B0009EA22D44B8DD1D674A7E9FE6A1F547792C
-:10A7C000878DFC6EF42FF7E914275FC27C01B7A9CF
-:10A7D000CC43FBEE36A65970DC772F5A3DC83FDFDD
-:10A7E00015FC643AF3D1F799CC4FE99D2C40F5EF75
-:10A7F00062CD94FF7DC480DE3530BFC98F65A6234E
-:10A800007F0D81FB4F08EE76EDEE6E9C5E4EF540BF
-:10A81000B8AFEFFE9DE877B2A017D8AF2B71DDB0CF
-:10A820005F07E7A586EC9B719C5E98D999FECFF6F1
-:10A830004D531B3F2F80313A1261FD370A14DEE879
-:10A8400029A37302E5AC6E00FF26974A7256D19891
-:10A850001633CE7FDBE79C8FBDBE8C45FAA0FCF59E
-:10A86000312A437C4DDA30FE0CB67B8B05BA0D865F
-:10A87000FA8557B4A3D1B0FE49C0DF8123B3A25EED
-:10A88000704E849C4B3727AC1B8772C4CD7DF5DF9F
-:10A890006F61F52AC26F428EFE5C9984E78AAC072D
-:10A8A000E31D4238C4763C5FB6A708F9A21FEB77D8
-:10A8B0002DE74BA5C9F36BE223406748F773CCCC77
-:10A8C000D3D97E73642A928F91DC72AB18BB6DC2B0
-:10A8D00065EB2558EFA914ED25EC67F1C4BFCC4614
-:10A8E0007E0C7AD4DB83F01CFD9DCAEE87F213B593
-:10A8F0000071385C4FD6DA9907049CCF6A9D943F6B
-:10A900005D9B40E9D95A17A5E76BB3A8FC62AD9BE4
-:10A91000F251A9DE23D8EF9C359F9B518E5A1D26FC
-:10A92000F1C7E7B144D0EFEA30AE472D895CF26160
-:10A93000318CBB840E4038AF1BEAC723584A0F3412
-:10A94000BC86297C571D58BE4E71E3F934FFA8B66A
-:10A950000AC967E15BCD9390ED0CF9E0643CC2ADB0
-:10A96000E28AC234D84A3F48F7BC8BE39FAA1D460F
-:10A97000F33A53EBA179791A5B5E8B83F6E76A8B26
-:10A98000289F99EAFD10E9DBC33EB762FB893B5B78
-:10A99000CC49505EE8513CB8BF477B98DF0FF8DBED
-:10A9A00060E1E7C506382F907EC6E44E79E27B88E9
-:10A9B000B614ED048E735BECDCC238A4AB61C566E3
-:10A9C000AC37FD1B90B95282F47DB57D72E1A04297
-:10A9D000F0B9703086E021E15421F075617FFF5BB2
-:10A9E0004740BF07418E54617E6D574C34BFB60F50
-:10A9F000C3FD282418DB2FDE97D68339709DD0D86D
-:10AA000086F9FE3D18E021C2FEF413A8979DDBF500
-:10AA1000C304C4CBB9D8862F3F46BEF767CEF7181C
-:10AA20006BF8EC71E48BBD12DCF743EEA205F43455
-:10AA3000D26BAA23F05CACB4328DE7B5FE983F1719
-:10AA4000CE487F1DBA3B692CEE271CCF9519E46BCD
-:10AA5000598A8BD500DD67EC7E2CF5C730EFED0D04
-:10AA6000F33F7E1CD20B7E93CF02E7D605D670F162
-:10AA700025E4CB5B1CEEAD0CEB9BC3B1FE03163E95
-:10AA80002FDF56D0DB5DD89F9FF800945BB1BCFCF4
-:10AA9000B95FF4C4F9BF8C7209E45F5E1741FCEE44
-:10AAA000658BFB780DB67B82F7F7CC43F79E388039
-:10AAB000E98315F9F742DA273596E03DEFE78BFA9F
-:10AAC000617B38F75922F0C75FBDA004C2006EB9A0
-:10AAD000EB0F2D4F84F1066E6C31F584346F8B5281
-:10AAE0008769FFDE45C7F0BC4D4F75D13C06ED4C84
-:10AAF00051519EECD7D3FFF10D240FE8E5849CF56E
-:10AB00009F8FEDC982F2423FA5E1EC32A087D5BD0F
-:10AB1000FF90CFF5C47AEA675FE3D4F7EE64B80E2E
-:10AB2000904470DEC556B253E0722D90BFB0376DC1
-:10AB300013DA33F69B7C9BE8FC9AC3E5950B5EDF4A
-:10AB40002F90CE2AA0BE0FF21579BEA8EBA1BCE2D1
-:10AB5000CF7DDD4051ACF7933716213C2AF73E32CA
-:10AB6000BE27D4BB3092B90115AC64DFE5F1D88EB5
-:10AB7000F586B5603F7BEBE2EF80760FE48C1D82BB
-:10AB800074E5551B681C56C5C7794C9C7BAC198075
-:10AB9000132F5809D47B003EE3F7D8C69843492CBD
-:10ABA000889FAAC66529686F19ACD9DD2AEE9B1467
-:10ABB0005F62B523788EC2F977632AD44BB48A7E5C
-:10ABC0009D5393BDD770FE59C57926FB7BCCCA7CBB
-:10ABD00061B15C6E56F07CB6F2737B2BF0979AFCF9
-:10ABE000E0B90DE34E4FE5ED495E4E82433A0FE684
-:10ABF00099F498CD4FB2C1771C5FCA5B55427F91E3
-:10AC000072CB8CB8BA579A61BD8F456873717DF36A
-:10AC1000C5B9CFCC6E17CA453F8DF0CC4B25B9AB2B
-:10AC20003519D700E76A09E62B5590C3D242E430C4
-:10AC3000FB773B577744782AB1FD77AD6FE4BB4B88
-:10AC4000BE30B13CA083258FD8484FAD13F6863A6D
-:10AC500061DFAA8B1C6A477EC18E9ACA5F83F37636
-:10AC600014EFA1BDDF2591F9C44FEA18EB146E076C
-:10AC7000810F68C07702706E68C00F465F695539F2
-:10AC8000DD371D891E8CFC9679225D680730312DD9
-:10AC9000E43C35F603787B08E1398645302DE4DC69
-:10ACA000F4B0182BEE5FE688FD97D63F52E04FAE2A
-:10ACB00063A4B0E78D6CFB3002F9E6922FF2897F36
-:10ACC00076B5BE57C4FA7E83EB83D492E9DD84F86F
-:10ACD00018F557A719D739CA3C3919E51C98FF331D
-:10ACE000F87DF45F4DFAF97F13AECB7FD7757C5FAB
-:10ACF000613E13EECFCFAD7EDC9F8D40DFB89F1B52
-:10AD000017E5F8910FEC87FD6047BD668A95E4DC96
-:10AD10004661276DECEE24FBD2CB169EF7CD14EDE9
-:10AD2000C3189D238D337B52FB9EB6EA3773B1FF68
-:10AD3000BA08E29F8D16FF9A54ECFF27716E1FE050
-:10AD40004BC5F36310E81B827FD7590277AAD8DF7F
-:10AD5000E75686E3AD8F09245541FDF58B7A52FD08
-:10AD60000F419442FBDD0893E9EEC90E2CF724C68F
-:10AD7000427EFFB72A9D1BEBF320EF203E4EF6C02C
-:10AD8000F5933D89E1DD308D37D17C54564DDF534D
-:10AD900078BB8F2DBCDE1D027F1F09FCC03E273E05
-:10ADA000A04D8A30231D5F4C9DD342FB8379121541
-:10ADB00098CFE3F3D219F2D13B4A6F4A21BAA97F67
-:10ADC0008CF8D90C8103D91F36B00F45399AFF99F9
-:10ADD000397F6B18E2F3B69230B28F7E58B23CD214
-:10ADE00005ED6FD3D4800DEDC6D30A3DA1FAF8C5A9
-:10ADF000540F8D5BD1909D763284AEE7D8806F4042
-:10AE0000FF6BC2B5D348CFEC401E951F00E1E61F93
-:10AE1000B0AF4ECC4BDF4D768D79528F0CCC45BC0C
-:10AE20001E6CB533D44FBAA2873AC403F4DB479CF7
-:10AE3000EB44AF88FF19E15CCF3103BD40BEAE21CA
-:10AE40009BF49CA72CCCA320BEF6D908FF4553EC5D
-:10AE50001EB23FCE08DF6483F2BB053FAB9B114EB1
-:10AE6000DFEB5E89F49B14D29F28EFDB63A176E5CC
-:10AE700056FF8E6DD04FF9C16C3A6FF65BC5B82F97
-:10AE800045F0F2284FCACAC158DE83E8E0658B2B33
-:10AE90009ACADF50199587073262008E91615A581D
-:10AEA000DA10A43BC0B303FBE5DF8F0BFA3A0EDDEB
-:10AEB00022FE7CD591D42F6D7DC86B75BD37233EA6
-:10AEC000352B2F673F52A9FCB8D393381FF2C7AB7D
-:10AED00093685ED2CE74DC6B25BA3F5EAE90BCF454
-:10AEE000A71A35600DB5E34FD97E5F06B4FBF4A019
-:10AEF00085EC78B37E56F6167E9FB5BC82EC91B396
-:10AF00004A97929FE0E2D24F876E80F5342FFF245C
-:10AF1000590BB14BCF2A8756A176D5344F6A1AE028
-:10AF2000E7D6342D1DD75795D3BC00E5EB8BD6A6BD
-:10AF300027515F7075D3B2F0FBA5174F6DE37277A1
-:10AF40006B069E1395664E27F2BCAD1274F85F69CE
-:10AF5000DA00EC0FE0361BCF95889C26CEFF967E5C
-:10AF600037FE7FB671EB7E05C6290B6FACA454F596
-:10AF70000FC07ECE298128258DE0A8E1BE3AEF0CD6
-:10AF80004421FC351397F3CAB6EBD7857FCCF16823
-:10AF9000376364072F6B503D61B80F98DF8AF32F3A
-:10AFA00063D660FD9420BEA01FC21773FC69F68FA4
-:10AFB000010FA53BB2F351BF288B39F0D008AA0787
-:10AFC000EDE47E513BE6E57A3ACE87AFEFBCD80799
-:10AFD000E7E18B05E965A74DEAF934FEC5177BD09B
-:10AFE000F8F1629F5C5404BDEE08E374E58675E1F8
-:10AFF0003C7FCDE9EA51C92777F07ECAE27C26E49E
-:10B000004B65B54EA22BC997602EB4BFCEED4EA2B4
-:10B0100076928F312F63547F77E2662EBF097D17BA
-:10B02000270CF54B7FC5C7C13CF2F3B3CF26C971DE
-:10B0300049DE369EC7C6752F49E3F62938A77BFC43
-:10B04000337D312B61EE13F30685AC27D22AF882CB
-:10B050003B61722EFA17ACBA7E2F465AEFF638D003
-:10B06000CFA0FF2EFBAB4DE3FA641F039E7BAAAD7E
-:10B07000876CB80F9F66746E18E7B14AB47BF6D937
-:10B0800076BCAAC29ECE5C929E5C5C9E27FC7D64D0
-:10B0900095F8FB5E12F0E33284556A108EFBF3B430
-:10B0A000243C372E0AFFD0FE18C8E7A03CC5F12289
-:10B0B000F3121F46BA5CFED18224F4473D2FE168AB
-:10B0C00080F732802B96D75940BFC9413DF7D8C38E
-:10B0D00027D383EBF9ACD6E39917925FB021CF8EDB
-:10B0E000FB71E1C63CFB9C107CD46D1F74CC0570D9
-:10B0F0003FBFDDEC46F65E67F63F84727ADD76B5DB
-:10B1000001E908CAED08EFF38EC3BFC37A0B36C658
-:10B11000E4A31C2EDB2FDC50E899178287FEDBF5B9
-:10B1200078C96DD0E7071ED0E75F4119B4FBB5B70A
-:10B13000CB0BE8F3838EE9F3AC15B03714E5018E41
-:10B14000B71786B98FB9006F7DFCAA1B3FF5714C0C
-:10B15000993A11E5888DAA3B1DCAFB2CF5DE827257
-:10B16000C5E98DF3DD88F612D557F963C069C927A3
-:10B17000E38FE1B97A8E35FC6122E06541E33AABB9
-:10B18000D985EBD6D3FB7E93A0DF67B9FD6E915FC7
-:10B190005FDE912F2C93FEC1AC50FA32D2018C7B32
-:10B1A000BB0726545EF3DEC3C8174A2600E1039DA1
-:10B1B0000D6F586745F9EFEAE3F8B87CE9F0B8108D
-:10B1C0001EC5C378D9F53505EC53D8776CEDEFC7BC
-:10B1D000E3BC8B1F5048FE287E3EF328D257CB9EFF
-:10B1E0009937537A7B11AD5FDA0917362A8148C83F
-:10B1F0003B87B90E3443BBF97E6EEF98B3C216E4B9
-:10B20000870CFD648679AC0F2987F92F3C70E86BB9
-:10B2100005FA2FD9A86FB708F8349E3FA55BFE61E9
-:10B220000BFD2EF5D1EB1B37A9B8EEF962FEF2FC4F
-:10B2300064BED1E4A7B89E376127F1FFE0DC991D19
-:10B24000AF297DBB07CFD1EBD7F3F6C0768B71DD8D
-:10B25000150EAB0BD75D6167810898CFB148ABC7BE
-:10B2600009DF2F6F88243BDD021BC8ABF994B23095
-:10B27000F47B3037F9CB3E7B4725B9A7228EE3BD5F
-:10B28000E22985F4B40A34AE62FE699E5FC402B45A
-:10B290001EA4174FE83AFDFA3CABE7FA5DB93970E6
-:10B2A00008E152CA9AB97E06F8F484F8BBCB619DD6
-:10B2B0001FC6A2FC6668CFDC1AF9F11C5C1EAB3A13
-:10B2C000F00F5B68B9D433A51E2CEDC74F6578C36A
-:10B2D000711C8B909BD7DFE7C9C0F9AEB4783210F0
-:10B2E0000EBE7561A4EFDFB1899F5FEB63408EED09
-:10B2F00046F233C9E377285C3E6733393F1C617AF5
-:10B300002E80E74DEB2331EECD2EAA4FE7D8FA077A
-:10B31000B3B9FCFFAD4AF250EB3A1E17B13E8FC3F2
-:10B320006FFD83B95CFE97E75E7746FD7594B73D88
-:10B33000196887600FF3797D8C4B0A91AFBF8DD769
-:10B340006EE81BB23E2997B392EFE6CFD82AE234DB
-:10B350005AD785F9D19F7152F1BE660A916FBD7DB2
-:10B36000F9393174AC679BA8477E8F79A6C9F7DF9E
-:10B3700000F39AF7A8C985F6B776787B3C19787EF2
-:10B380009E5C17968F7436742CB7471DCFE37C3FB5
-:10B390006230F3F8219D29FA9DD9D7A44B13C281BD
-:10B3A000FEA09F9385DC1E1E39D84B76C0AD2ECEF5
-:10B3B000F78DEB982FFA9967F5FE765427F3917085
-:10B3C00061E3B8DC71F21E65339F17E01BF2437F27
-:10B3D0001E46F6C393E25C92F005BAA1B807C9B75E
-:10B3E00062DAE9C5BF230CE8659D85D381D4DB42D1
-:10B3F000E845E0BF37E1F70E815FF66098A01713CC
-:10B40000FB6F8463A193D3C335EA5F80EF9F20BEB7
-:10B410008D7A98C43733FB87FC33BF4BC50BBBF623
-:10B42000FB40CE28FDF523510CEA9D31D7C7BBA1C7
-:10B430007DF9D695511E484F9B7D514E18FF8C5F6C
-:10B440002DF27702EF97FB4AFBB5C7A184F849CFED
-:10B450003EFBC0245CE7975B2D4E640955DB6DA471
-:10B460008F55EE5D44F23AE45B787EF5E7E837AD60
-:10B470003AA0B7CF973EF348BC8BE0ED4B32256046
-:10B480001A486290566EB1B4FB91611890BF5B5739
-:10B49000E1FC8CED711E5700DF550D6AB135BA63C2
-:10B4A0007995E02F557B1FF81CED86557B6F3A850B
-:10B4B000FCBECAE0172811FE11A35FE0577DF571AD
-:10B4C00007001F8A33F0C1BCD2895CB85DB96EC772
-:10B4D00063035A507ED8F266949213F40F48BF4922
-:10B4E0005BC3DCA75E7275BD2F2F0AFB70106F9CCB
-:10B4F0007FB90E2818AC048A3F4FCB2D81A811A824
-:10B50000EF6DB290FC5BBEEBE96D8F239D7D64A374
-:10B51000F3BD6CD7AB7FB81EE5E73D966E13F832EE
-:10B520001C4A485C4E958BDBE3247E4A9F7FD5EA1C
-:10B53000CAE5DF97C606F154B6E79015E3838CF0B1
-:10B540002C6838646D767482AF8696F16487DAF180
-:10B550009515F7C799830AEB91D2B17DC9A657A378
-:10B56000503E4338E1F924F1D68E47437DE87FD23F
-:10B570004B83A99E13F594ABE1F181BE8CE056F1AB
-:10B5800042248B8179947C6CF34F40FCEE5E1285F3
-:10B59000EB3965AEE674FFC4CA7894F74A2CBE78DE
-:10B5A00027A5FC7BC993DF277A5CA854C73B738827
-:10B5B000DE134D244BF812719DF337DE46EB5CC071
-:10B5C00034A2C7922754AF1FD22FCCAC684F27FBB1
-:10B5D000E6BA74BE6F4E6D06E4C23A4F89F82CDFAE
-:10B5E000BBAAD0A3EFA1F3FCFB62CD8C2DA6FC1768
-:10B5F000429E0B4B6F8FAFB287EAA1555B56372146
-:10B600009ECEF6F6F4C079021C7C026ECA3FA05FA3
-:10B61000F5F7853D389E980BE317A81D9CAB05F800
-:10B620001DEB37593C68670F6927F4443EFEF7C4A9
-:10B63000F830EF70D4834FC5771EFFB500D7C7E74A
-:10B64000D7141AFFD5251FD8721FD1D75FDFE77C2B
-:10B65000A6D23FB988CA9B2C811E58EE3F344D219B
-:10B660003E616381CEF6F9168BD8E7FA7298A75936
-:10B670000985EF412E9F4A7A5900725920444E089D
-:10B68000D28F35F89DD6FF73C1E79AC99F27FD80F9
-:10B690000B057F30AEDFC82FF2D23B8F53611B3BCF
-:10B6A000F73F05F9848FC62D87F31DE591F28F6C66
-:10B6B000244794EFB278114EE7761EF9C31DA8DF38
-:10B6C00036C87DADE7C3C67D5DF2DC904EF7F5B9B7
-:10B6D000B5799DEF6BF8DEE9BE5EAB10BFFB9FF264
-:10B6E0006138F9C82E71B5FDBBB00B3E3C2B5DCF68
-:10B6F00087BF6039D123B0D059DC87F06480AF8434
-:10B70000AB91AFB6F57575CA5719867484C053C22C
-:10B7100051D22B631A8DD34ED7926E255DB7D3AD20
-:10B7200071DD7A781ACB9311F73075EF8B1692177B
-:10B73000CA1B797C22B4A378BA2AB4CF53EDFAD7C6
-:10B7400092BA85E6FD867C83A1BEC790F71AEA6BA4
-:10B75000867CB5AE7EF9812356AE3F0474F56C3518
-:10B76000B7903ED251CEF073BFD3DECFAD3EA48FA3
-:10B770005EAD56E49396E5CC1709ED5B5F5149EE5B
-:10B78000B9E46A8D42B965651897EB2E39453E8656
-:10B79000E75BBB5B57219F94DF5BC3B81DE692B7A5
-:10B7A000352A26449F6F6954A3D0FEDBEC67459D84
-:10B7B000C7B7D4115C9B5957E55CBEBB14CEED0DE9
-:10B7C00097C2B9BDA1507524D7A01DB69EC711CE92
-:10B7D0005B363D8AE2301AD36E9D01DFE7BF4161DF
-:10B7E00006184767C6F887B91C95EC34F3513CE15D
-:10B7F000DC461E07316FAD1ECF0B1C5B285EEE0BC7
-:10B80000B694D205EBF5F10BA56C2DD159C946C301
-:10B81000F7C65B689F941AF68926ECC3C67D72480A
-:10B82000F29F3C96A78B9314FCBC50CDB97506E0F3
-:10B83000E3D23195D920DFD6A8B25583795C2CFAB2
-:10B840009F5021C1FD5709FB15E52609AFF3B88FBD
-:10B8500032BB965FCEEFFBF3D01F23DDECFF64C05D
-:10B860002F213DBFFFA38C9731FFC21F933F611D66
-:10B87000EB171CFC7A36F2E94B076D0CE9FDD2C1DF
-:10B88000D793D11E79E9251BE9D99796DBB89DFBA3
-:10B8900060A41F8F984BBDB95C5CF7CA57039AE947
-:10B8A0005C5E41F83B9F6EE5F255E3DF8EA33DBD44
-:10B8B000AD1156857CFF6004EDA7AA97C2C8CE7C67
-:10B8C000E995AF8686DAE7FEA7EB91FEF74B916C20
-:10B8D000C67348C7315C2FA87A79F8D3E85FAED831
-:10B8E0007BC83A17CA0B7EF3F701C8572F3DC7E54F
-:10B8F000A98B96E627D1C6F955FA999F5B86A39D39
-:10B900000F3AEB09BB3B237BAA2FA733B870385CF7
-:10B910000238E0BA002E25781E74058FA88CFF54DB
-:10B92000787C3E9BF3B7EB18FAA38370513CFC7B09
-:10B93000A4DFAED0FAF9F7835F0D40FE73B5F5E6EC
-:10B94000FC7FB6DE9BFF63D7CBE9FD5D5442867476
-:10B95000A4FB8E74FDC20F28BF3BD24DF3FD8EFBBE
-:10B96000BD14D7DFFD3F71FDFF3BF85EF31FBBDE6B
-:10B97000ABE1FB0D81EF4827FA332FBDF2F7647678
-:10B980000DEB7EE6FF289D4B397EACEA3E9607F52F
-:10B99000DF640DEFBB53481AE9540E793F43AF3FC4
-:10B9A00015307E4E17D8CB48FE2CE8F520C9CB7554
-:10B9B0002C9FFC17BE5E2AF975280804E0F07A4235
-:10B9C0001EDDB362E640AF25901F9B5441F16246F5
-:10B9D000BDB2207C6211CAA74796C1BCA09F23912B
-:10B9E0002627FAA8C7F55203B60194B660FA5AF2B0
-:10B9F0002D14F73FCEA1D7AF6E31E84937B9F4E542
-:10BA000045ECB96EE8B72BCAB1D0FD8AF1583F4476
-:10BA1000AF7C2EC349EBBC89D5AF703AAE1D4EE664
-:10BA20004C0EA78E70F8E770EB0027A1479B457D71
-:10BA300023DCCC8EFB9BB09D99815ECCD74BFAB4B6
-:10BA4000D48BAF064F26F46DB3185AC2D7DC8BFBEC
-:10BA50006743FA25B848B85F2BBC259E8C7097F0D9
-:10BA6000957033E2E18F194CE8B71CFEBDCC7966C6
-:10BA7000DC77A3845C3FCE1CC3F3BD9A542FED4703
-:10BA80003FA7F3BFBACD28D78F71C4501CA9F1FED0
-:10BA9000C29C61314315586F9299F96CA087A2EF4F
-:10BAA0008DECAEF799FDCB53701C6EDFED6DE6F6B5
-:10BAB0006BD8DDBEF07CAAEFB142BEF8E185CC03C5
-:10BAC000F58B93985BE1F559742C85C73115E3C468
-:10BAD00020C576C5D1BCDFE21ECCBF9CE393F082CB
-:10BAE000661FB46F40BF1E532C6F1F954FED7D2610
-:10BAF000DEDE6386B44F1A8F53685DC9EDF2C5ABC5
-:10BB00007B6720FF9830566F675E9AC9ED2E323DF5
-:10BB10009DE92278A9267702DDA758914DFA911A5E
-:10BB2000EEADD88776FADD3C4EA778D55D1387E079
-:10BB3000FC76C7B9717A6727ED19CAEBCFFCFE070F
-:10BB4000F05DDB1E46DF1D59DA7599180FA0B86647
-:10BB5000EF830F736E3B624D8021B486C917D04EC0
-:10BB600038C9B7E777E89F9C344DA5FA93188FC37F
-:10BB7000642B22280E73A2EF737302F43711940E14
-:10BB80002C6F097326DF03F32F16F6E102B15FD4A1
-:10BB900070A63DE7C079F5CE4885EF1359E7F1C9A6
-:10BBA000CB447CB23A56D9887EA63E05DC7E2FEB8C
-:10BBB000633FD8EFEA4C6EAF9F24529907B852FD0D
-:10BBC000796B6C2D69A8FFACB10432213D943D76B0
-:10BBD0000AAE73422A1BBF01E17EAFCA36D37C5B3B
-:10BBE0008BC9AF1099E5423C6840D2E45FA94F7120
-:10BBF000A15DAC654C4300FD092DBF4871D7B90864
-:10BC0000CB140F24F5AD963181BE68C76FCDE37EAE
-:10BC100089E3CEE648D417E73AECFCFEA4882B9AD9
-:10BC20002FEED1F4A96B7EF03AD4431F51C95F3394
-:10BC3000FF117E3FEC2F0EBB5F41BD6D3DDFA76C5A
-:10BC4000AD3E8E8839DD64079A5B3FC68AFAE63CD2
-:10BC500087C78AEB5C9BA5556722DF16F711FB218E
-:10BC600012A0CBE2FA628A5751A360DFE13E31BBFA
-:10BC7000A2500F36C6215589B823995F13AEDD8BCC
-:10BC8000709A13EDDA8DF472A2268DECA30704DD11
-:10BC90004DC0B84AF467989B13713EFDF03B8C3F52
-:10BCA00021D699E1207A0E630887168B3303E9BB0E
-:10BCB00065659809FD72139673BA867D663743FBF6
-:10BCC000FBCC2C1CFD0C378A7E672D337B3741BEA5
-:10BCD000979D99236391AEF288AECDFDB449B8BE6D
-:10BCE000D33F61C3901EE6AE5D47FE184917CCDC1A
-:10BCF000342E0EC639BD35251FF9663B9FEE37B68B
-:10BD00001EDBB5D3C33485E800D24369440F531E0C
-:10BD1000217A181BE8BB3807F5D172E6C1F33D81E3
-:10BD2000B9514E6863ADE4AF6C73585D68FF92FC27
-:10BD300044F20D795F56D2C13638EFCD16C6B6D76C
-:10BD4000DA297DB6D6C9CCE98CEDAC4DA0FCEE5A13
-:10BD500017A50DB559F4FDB95A37E5F7D60EA3FC72
-:10BD6000FE5A0FE50FD41651FA52AD97BE4BBE04E2
-:10BD700070213E24F98AE447731DD616F45F4ABE4B
-:10BD800064A49BD900DED1F9D49EF89EE477B80E66
-:10BD9000537E901F49FCA62A5E5F420AF2B1E699E3
-:10BDA00088FF42F5FCAE17502F2F71B8494F679CA2
-:10BDB000EFB501BD225C92ADEC00DA65EBEEF1B4BB
-:10BDC000AC4E09C2FFCE12859943E8EAAEEA30666E
-:10BDD0000E3937EEAE89D1E567D5BCF76A0FE87F3B
-:10BDE0004677ED0DC4DBF19F7EF6C41FE1FB533FA8
-:10BDF0003D9B8EF886796C7D0CC75D1ADE3E8F58B0
-:10BE0000CCAFB0909FAB8FB09FF411F613FC137AB8
-:10BE10009FF9A99FFE37EDF3961A9B0BE5E28F1170
-:10BE20005F00DF3F097CCDA9B1111C8B577EBAEBB7
-:10BE300005DCEF4BADC4EFE6AC10FBD1700FFA445C
-:10BE40002223BB0448D514CF7EE227D64004F47FDA
-:10BE500042E1FB5801E16016C61FAE79FD43E403E1
-:10BE60004ACD31F2BF6B786F0FE7E7B39CD7DDABFC
-:10BE7000AE798DEAB1E65E31685F94F79223067B76
-:10BE8000AC2E583FD236E26F4ED66196887E967AB7
-:10BE9000C589A2DF3CF17DDE1A85FC9A18C7330DF7
-:10BEA000E4BFB64C95F0999B69A6F4018CC127F9C3
-:10BEB000AE9ECE2949B7F3D6423BDC1FF579D605B5
-:10BEC00021FC788EF83E37CB44A9FC6ECAE2FDF621
-:10BED0005C933703E58A9E589E8369FE0C846F4FFE
-:10BEE000C778B3124207DF88F173C5F80FE0A68365
-:10BEF000FFDD9F956A9D9F43F701E91C93E3CCC941
-:10BF0000CA5F85F1A573D68E412ECCEA2CEE846EE5
-:10BF100068BFCB92FD88FBD8761E475DDEC539220F
-:10BF2000ED6AA7F19FC369DD64F72DDDFDABDD7818
-:10BF3000BFA0F4131BE1B774A088DBCAF10F9D4AC0
-:10BF40000648BD3D7BDCAFFE1C457E8ABD3CBE1372
-:10BF5000526E675D5AC2EDB26ED85F9DF88B8EEE61
-:10BF6000FE24AA533BF65EF53BD9B1AB946FA250C9
-:10BF70008E90EB297CE58B789A877285FC4455AFCF
-:10BF8000AC8CEF2CCECB68C76EB7770BBB5ED5D22F
-:10BF9000A24EEDDD46FBDDF02C83FFC0CCE89E9980
-:10BFA000B4DF3135271AFD005F88FB275DE939D200
-:10BFB000FE5DB5013A8903BA34BBA2D1BF75A90BA6
-:10BFC000F97A59163FFF2F087BF9A59D2AE93D977D
-:10BFD0007646D2BEAADCF9F06BE877ACDCA2D034AE
-:10BFE0002A5813C10FE0CAECA1E71AC6B1C5759C67
-:10BFF000779B3F3D1ACF95B25F455623BD2D6A50C2
-:10C000003C5B613E6D765774F790F9DC85F406F47D
-:10C0100053666B184AF016F39F9AC5F9A4ACB7A8FB
-:10C02000F161B22F43BD8B2417FD3A82F1FB29AD9C
-:10C03000BFC3799EDB38C88DFEC2450D7B2A49AE51
-:10C04000D819E144BBC25911B7DCDE8FA0EF4559C6
-:10C050005C8E3927FC47E776F37700709EB8CFCE29
-:10C060002ADC0EDD8E6FD1AE4AC02D368BEF3359F0
-:10C070007F51434B545FA87FEAC07B94DE2BD6B53B
-:10C08000C8D13400CFE3537B23C8FF756AEF2FC7B5
-:10C09000BF0CE35D6818D30DF785EC7F759685EAD4
-:10C0A0005FD8A81621BC989FC7CD54207C0785CEA9
-:10C0B000336E932F2574FFF1F8A1737B9F8F32E5C8
-:10C0C00004F15961AFB6279A701FDDE345FA8E403F
-:10C0D000E2817AD6BD937D78865535E631A46BDA58
-:10C0E0007F89547F8D29A49ECDE2A63853CB8162EF
-:10C0F0000FBF6722EE458938FE423587FC8AB307B9
-:10C10000BAA6DF897CF24D0BE16371B66B3AF2A7F8
-:10C11000CB4D2AC3792E4E6101944F96DC1BB90991
-:10C12000CF3139EFD983383F285FA3300FACAFDC74
-:10C13000AF320DD29E807F1FD25342F3108C936C8E
-:10C1400049E172858C1F7DBCC4E4B1C239B8272B8C
-:10C1500056F059ED17F3D17F36258BF4B9E356E647
-:10C1600053D1AEF41C8F2F2D4FE571CD8F8B78F806
-:10C17000F2D840461CF4775EE0B77C4A2003E32EF9
-:10C18000CA9F4BA4B88BF356EEF7C4EFE8672DCFE8
-:10C1900087F60E7A674393ED6342E8A97C8EDB85D0
-:10C1A000F5D458B72BCF81F3755E2439775F2443DC
-:10C1B00039D7F442248F9B7A266CB32D046FAF0AD3
-:10C1C000FA93EF77B03B789CD1A3161E97FAE8D686
-:10C1D00044BF3F045E8F5AB49908075C07CAF78BC7
-:10C1E000ACF51928FFCAF92E8AAAA7799E17F4BEC2
-:10C1F00028BC9EC7738BFBC0581FF32D220EBD7544
-:10C20000878DE280CE2636EDC7F1CFEEC866B8FE48
-:10C210009614FF8203540EF225E0B3F4595B00D765
-:10C22000736607B7479FB17079EDCCE40417E2B7A6
-:10C2300068CA86D964AFD96253D0CE774661D60436
-:10C240002CDFDA9DE2CF4B6B6B287EBB14D806DE69
-:10C250001F82B408EF019DD99A4DF16667F0DD06A3
-:10C2600085BEAFC1EF1AAB9FFD2384C776AE5F9D3D
-:10C270007DF66FD9A1F1DE322DDDA28FAF9374224E
-:10C28000CB3FCBE2FAD067595C9F3B9BC5ED1115C4
-:10C29000110D8FA6D23A39DC014FFC1D1BD61CF9BB
-:10C2A000CBC1184F91AE201F799C05327E897687CD
-:10C2B000ED5CFF3ABBD34271EBA52F447A288E6D1B
-:10C2C000F575268AA750B99C5E6A02F041AAFC74F3
-:10C2D0003BC597757B362CDF46F239233DB775ABEE
-:10C2E0002AC6015D10D7BD8DC71D4F405992CA7334
-:10C2F000A9FC8CC89FD99F4B721FF4EFC1FB55A5B9
-:10C300003FFA3187E3D492B7B8DC65277E5BDEEE77
-:10C31000E719198DE760C5EA11D1785F91BDA332A5
-:10C32000945B8C70BA6C76F7403E3B3C5BF0DDFD75
-:10C330004F907FAA4CDC23287B56E17E68D8877813
-:10C340009FB36CD588C7883E7F6761E9B09EF30DC7
-:10C350000F4785E2232D9BF3C5F6FA5637D52F8379
-:10C36000FAD84FD9AA37A3683EDB2C14AF62C4E3D6
-:10C37000776EFFACFA9DDAB7D34703B7B374583F73
-:10C380006BFAC127D0FF5F7786B97DF4B581EEC126
-:10C390009DB3342CC0F59FDB15467CEB5C0CE70F9E
-:10C3A000A7809FFA32711EB7FC8CE2BBDE9D4AF774
-:10C3B000F716FAF5FDCA71B3B22D3CFE2ACE1D8DDB
-:10C3C000F18215EF703E0878B995DABF63A1F6C621
-:10C3D00075D8B239FF6FDF9FBB22881ECEF5E47897
-:10C3E00039B73B93CEA796184EE730DF64BCEF77A2
-:10C3F0006E57661EDDA343A107E8A154E8BFE762BC
-:10C400001A929D21E52D16A1C705A026D20DB601D1
-:10C41000FE5E5AC3E5AD32FB5A8A2FC178DDA1F921
-:10C4200094066CB11DE36E815E49BFACCDE6E7209A
-:10C43000C3F1E2459C38C9410D56E4DB9A9017CB15
-:10C44000771AE37679F96CD91EAF64C83861A443D2
-:10C450009F42712A652BEE5944F1F7D5EBEEC47D6E
-:10C4600026E75F666645A8A7B5282ACDA3258CDDFB
-:10C470003D05E5CAD07142E4B945D9EDF656E68CE2
-:10C4800027399684FE8A6C17A71B3C41F19EE20A6D
-:10C49000652D8D9322F55DBE2E0927008715E304D7
-:10C4A0005BC688F22ED62DE7695C77BBDC95CDF9AB
-:10C4B000514B8AEB672311CF6FAB74FFF7F23783D1
-:10C4C000A2633B91D382E7BC35182F0BF37F289BE7
-:10C4D000D1FCA7647339BD0CE371619E191BF5F1A2
-:10C4E000E2595BF4F97E3BF5F99CBDFAFC80467D90
-:10C4F000DE7D549FFF018E3B84EBE178DF18F57001
-:10C500004C510F77D9B81E8E79D4C331453D1CBF2D
-:10C51000A31E8E79D4C3318F7A38E625BC511FC74C
-:10C520003CEAE358FE9B6C7E3E968B784BC403D26C
-:10C530003B7B314C771FE9D22BFC7E09D001DF37E2
-:10C5400033ADB46F1EC71AA48F70BB53CFA9761733
-:10C55000C60FAF8AD3766477C77B284DAB12116FB5
-:10C56000E6668A63AD7A89C7B196E78739D0FED18E
-:10C57000BCF2D42A0C0FBD234EDB8DF52F595AB7D0
-:10C58000217C2B6A8ED07DFDE665AE776EE0F823C8
-:10C590003B0C2B892539AA18CFB9D8AEF1688C2766
-:10C5A000676BF5F1E3C67872631CB9910EA4FCF7D2
-:10C5B00094A53511F9FAA73BEC6B71FE9F8689FBB8
-:10C5C0003033EC86780007F193C50F2A9BF1BC7ECF
-:10C5D000279BDFCB6E3B06F27A27E7AC4CE75E1970
-:10C5E0004472797B7EAD62A2F874CD43E7D01231FC
-:10C5F000A764A5B56535F2B945263A372F83BC4601
-:10C60000F2E0FB2AC90FF8AE56E87AF05DAD50FAB9
-:10C61000C277B5F4F7257AEAEAE3BB5AFAFB12FDD2
-:10C62000F4F1F9D3961D42BD7FEADA41BA7AF3BC40
-:10C63000230C7014F316F2EC3C383F3C285F2EDDDF
-:10C64000908CF85DB2A8AD6535E077C9BE303796FD
-:10C6500097E0FF015F2C813EF1DE65C95E717FB915
-:10C66000467F0ECF15E7508999F99CB1413A2C715C
-:10C67000324F0CB45FD4AF6900BE9FB5E88DF7862A
-:10C680003A5351CF18D303F951B2C54371B5E57B85
-:10C69000D2639641BFCD7DB56F91EE4ED61F7968BE
-:10C6A000169E877BB8FEF7E9DAE7A328BE4CD05B7D
-:10C6B000B2C5198E78DF54CFE3EBD07EA6C606E96B
-:10C6C00062537D5C785F4770BD413AF886F004F8AC
-:10C6D000E1769E92C3E417696B10EB1DA3F850CE70
-:10C6E00096EB93EF6EB115BC9FEF89FC49A16FC823
-:10C6F000759ECF3E34C085F73A6A0F24ABC8CF4D44
-:10C700003BB7A11E72C5A625F61B82F1A0E97FC426
-:10C7100077D84A3FE0EBF9CBFA82A8E1287FEEB266
-:10C72000B827407E75FDD356D42B4ACD7E2BC567E6
-:10C73000EED864C578E51BB76FA2EF0BB617533C74
-:10C74000E642564DFAE869F94E828047C95865A31A
-:10C7500013E65DDB8FF38F9270EEDF03F9E8557C13
-:10C76000A7E4F276250FE37CA679F7588BE17BBE30
-:10C77000A867DC276D6F4D2DEC4EF0E0F7403E6072
-:10C78000A0DDA775DC1753AFA4D0BE9876A53FE90E
-:10C7900069B705B2B93E9C63D087DF52B93DAF910E
-:10C7A000EF83126BA0DB54DC27072D24E75698F9A2
-:10C7B0003B4F15F0EFEB21F58E5475F45A352E42B0
-:10C7C00047CF3358ACEE3ECDED185412929F362130
-:10C7D0004D577FFAB4FE06FACF0F96131FB95E7756
-:10C7E000EFAF62A9CFA5909C3956FF9DF1F842C6E4
-:10C7F0006ED6B5AF605382F590BEB7285CEFD91BFB
-:10C80000B319ED802526AE3FCDD0F8F7CA03FC3B27
-:10C810009BC174FBB04F9AFB8FFC5CB490DF40DA95
-:10C82000DB67E0BF3B813F63E1EDF7D8F11E3FDA04
-:10C830002774F7BB85BF10E78D78A810F6A48A2C63
-:10C840006E4FAAF03559F19D0480BF392E96EAD972
-:10C85000E330AEB25E217B23A64B29CE521FA785C3
-:10C86000FD61FC63E531B518F789B1BC04DF2942ED
-:10C87000FCBEC4E3522BD12E14D5F17DB44AB413BF
-:10C88000A17DCBF01EDAA17E2E211FF957F5443889
-:10C890004E50F2E8DEE6CE43568CCF9B362D260F67
-:10C8A000F78F91CE247F877D4D71856D6F1D213A65
-:10C8B0006B2B31131D5F0D1E951E6E6735D2DF0287
-:10C8C000D664C5FB290BF62A6ED44BB11EC2A52730
-:10C8D000D2A5012E71B11DE121E1D40E3743F942F9
-:10C8E000C6E1B5F080E247FED8014E027EC6F97778
-:10C8F000053FB9AE059A361EF9845CDF425C078EAF
-:10C9000003EBC071A4DF820D33EED734B25F557AEA
-:10C91000799CAD913EA65CE17699DBAF98299D3676
-:10C9200041BF3FB11DEE93DBAEC453F9B5D24F25E5
-:10C93000CC13CF856BA51BB91EC98F83FB84DF4B3E
-:10C94000B8DA3B4746FBE4DBFD847D72081BA28B13
-:10C950006F16FCD6D8DE18DF2CE503E3B9531C694B
-:10C96000A278CB36472AC91D92FF6AE25CD1567E77
-:10C9700041F534A8C767E3D19D439AB0132E8E4C7E
-:10C98000A577249297C5C523BE8AC39C14D75FBCE4
-:10C990004CA538EA62A8E70A915B56AD484BC673CE
-:10C9A000E4C47D994FFA409E3F716FB7F86130CE75
-:10C9B000A72B2DDDECAE60BD132B0B9331BEE3D363
-:10C9C00075B619FE4EE0F59538372A7EFA219D732B
-:10C9D000174C6F45CD80F6E52BF745E1F581B29513
-:10C9E000FC7C5FDE57FBB21FF97D376D7322FC9C28
-:10C9F0009B06A09DD8C261DA2E5794AE2CEC8172B2
-:10CA000047F9B7479E74E2BDF0659678944BCFBC6A
-:10CA10000FE7A442E71CC913A7C3A00BF2C345D27A
-:10CA2000FB67A715E6417FD479D3A12F57A3BE9802
-:10CA3000D7901180F47ABB66E98F7AC1CAA7499E64
-:10CA400029BD7F5906BE43A82D4B8FEECC9E22D325
-:10CA50006DE23C47B91E5394EB31BE06E57ACCA398
-:10CA60005C8F29CAF5F8BD6A835E2E8C127E4A69F6
-:10CA700077EE53D79A877E3FDF5896554DE7B083C0
-:10CA8000DE055EA284BB913F2D41190AF37F8E2003
-:10CA9000BB037BFF261D9EE5BBC1F25DE051AD20CF
-:10CAA000AB85EC931BAED859E83DDD312C46972F72
-:10CAB000B027EAEA173A5374E5372664EBCA6F7277
-:10CAC000E5E9F2B7640DD7D59FE81EA3CBDF3AECBA
-:10CAD000265DFDC99EC9BAFCD4A299BAFAB7798B72
-:10CAE00075E5D3672CD295CFD4EED1E5EF2CB957AD
-:10CAF00057FFAEEA65BA72F94E7223EA63367CFFDD
-:10CB0000C54EA97C2FF9872AA3F7D8461698B89D59
-:10CB1000D1C6CFA3256FA73B42E9E0D6FE5C2FDD4F
-:10CB200095E3B9B9FF90E07B98F29DCBBBFA73BC5B
-:10CB300026B180C2F5E1A644A463633D63F9C888C9
-:10CB4000C3975D80CBD7FA1FB9CD8CEF475E77785E
-:10CB5000501AE4A372C26EA7FC88C3CFA7423E7EE0
-:10CB6000E7AD3C3FF0F0652CF7E744F1FC5446A2FA
-:10CB700049EACEDDB7613CCAC81B52D7BAB91DA578
-:10CB8000D3FBEE324578E03D718407A601A0634CEB
-:10CB90000F031D637A14E8789E05E605748CE9316D
-:10CBA000D04FF1FB6F413FC5F42DD04F31FD1DE853
-:10CBB000A59836815E8AE9BBB533287DBF56A3763A
-:10CBC0007FA82DA1F4C3DA6AFAFE716D0DA57FAAC4
-:10CBD000F5D1F77BFB4BFB4340F7DE6857EF8A4A02
-:10CBE0003FA7F46BD655B3E608E41BCDE698CFEC2F
-:10CBF000417F65D7760233FB2C445ECB553C2BFA44
-:10CC0000D3F8BD9C749F427C77A468F7217FF820FD
-:10CC1000656AFA2015CFB1EA5731D4E60353E7EF3E
-:10CC200047DE25E8C397E37908DB8DB2F3FBC9A3A0
-:10CC3000ECFCFEF12873531DD257DDD7CC85F13FB4
-:10CC40008722F9BB1F75F799FD680755AEF07D3E49
-:10CC5000BA1BA37CDDD7CD745F7994D39D80E79513
-:10CC6000CCB7FBFDF14F489C8FF4C3CBF89E7157B6
-:10CC70009A0A505E18EDB0BA908F84C60DA0BFFD21
-:10CC800050E467723E0CC793FEFD2D5FB380694090
-:10CC9000D08F3FCADE94827683D1DFB3BB43E39665
-:10CCA000A4BF5EB9D2ACA25D55C627C971E47C238E
-:10CCB000CDD05F7E30FE6894B3210FFD1D75150E3B
-:10CCC000EAAF077CB7E6533D8F4AED1AF2D02E3714
-:10CCD000BADC4171B0324EA0875837D4A3758EBBF1
-:10CCE000A2519CC468112781FDD879B90FFB19DDC9
-:10CCF0002D90887160A3ABF93B644F28D03E3F185C
-:10CD0000B780F52342F62DCE13FBEDFBDF305F94A9
-:10CD1000A33C1E82EF54A9D7B9445EFA1DED63C946
-:10CD2000BE552078CDF214ED1DA423AFCDF9E70850
-:10CD3000DADF69BDD16E3A59C8F5FF845EDEFFF7D0
-:10CD4000D08B87E3BB17237B9B916E245E249EBB15
-:10CD5000A22389F7903833C2737BDC98E8C7485F19
-:10CD60005DD195A4A751768E77C42BC6A9493A52B6
-:10CD7000AEF077DD4697DBE9BC937464A4838E74D0
-:10CD8000C4E9B2EEFB76EAAF231D05F18FF0F8D7C8
-:10CD9000E9A85945FFD5B5D2CFDDAD6C7C3414156B
-:10CDA000A46A77215D145F71BD86F9B96CCC7824D3
-:10CDB00029593EA18B72EDAFAD96E8103A1B25E8DC
-:10CDC0006C4917F5653DF9EE85ECFF61ACDFBD639D
-:10CDD000FD3785DCF066988C53F138F28606E34621
-:10CDE000971472FA2A4A5149EE28C8E1EF9F330797
-:10CDF00097B35DF017F9F1CD4C3B1A9D82EF947A11
-:10CE0000E97DD2F1DD0CEF930AF9BCC8E0E7BF3948
-:10CE1000E74692CF6FBECA3BD7C373C43DB71496E3
-:10CE2000728DEF907A72483FFCAEEF90F2F76BC7CD
-:10CE300089FD9E24E829CDA5B291B1F89EBB66C6B6
-:10CE4000C3E528BE5F3B00DF79F551FE26E6A7F477
-:10CE50001616203962221C4498BF154458CC1F89ED
-:10CE600098340BEF1C160C2AE88BDF43DED9BB0D80
-:10CE7000E757A96AFFE50C7967EFF03817DD5F3DEA
-:10CE80006C4F233914F7AB25C45EFA069CCF7D6145
-:10CE90007D47E0FCC6F45538BFFBC239FA3A9CDF47
-:10CEA00098BF396B19C376E35DFAB827D9FE1667C8
-:10CEB00001286A5DC3EF96012FF642F8BE19933937
-:10CEC0000EE9E2CD98EBC6E17ADF8CE961E2A9CD0B
-:10CED0004A69EE0B7D3B9393E57E088E379EC63301
-:10CEE000C257C2D3084709DF7F019EB539433AC212
-:10CEF000F32ED423D07E6B7F2F2A2115FD9B9CCF50
-:10CF00005644248BF748DF1EA0A662BCEF089AE7C0
-:10CF1000E89AE1CC8CFE763B87D3A95AE643F89E8B
-:10CF2000C125A0C1DB60DF63E6B1A6D038E83D369D
-:10CF30006D1DE2F5D44695EEEB5F782E8CEC76A76E
-:10CF4000FDDC2E5969D21EC5F272D5B5D68DF2E63A
-:10CF50009B2A7F47F49B23C95322AF815EB7F077AA
-:10CF60000ECAEDE33BC5A7D42F67A57AEEE2F20D1A
-:10CF7000D3FD1E452F1B7F0F42BE4BD995BC3534C8
-:10CF80009CF3BD5E36CEAF257E375A851C00FD0C66
-:10CF9000053E9BF4B370D2B71E8CF7EC463C801E66
-:10CFA00043EF4FB5F58AA4F3E9B0888B1B1DE84F1A
-:10CFB000EFAD1589DF1D785DBCE77E58C4CB3564C5
-:10CFC000682F62FBD75D877BA1FDE106C6FD403778
-:10CFD00039F8FBF9D7AA9F1FCA11FAF90036E09A6F
-:10CFE0007E27A1BB4AF72946B30CF2C317E07C9118
-:10CFF000CFBD31D78CE764C8EF24D0BAFEAFFD4E69
-:10D000000263AD2AAE2BC9A9B0C753AEFD77135446
-:10D01000A157C9DF4F28E2451D7E37E19751453CB6
-:10D020002EDFB1A0D3DF4D4812EF5A33173F37E45C
-:10D03000EF261426E8CF9102E798A34E4AF5769E94
-:10D04000A4ABC48F29B9E2FCB856FC5730C27F7B31
-:10D050009C69371EFF345AEBF733B4CF1774B3B85B
-:10D06000FDAE8E74F09FF6BB285DE1C9F87B2946C2
-:10D070003C197F3F25492D37D33B90024F33E02F9A
-:10D08000E2E906F1FB16E3F0F72DD8BF0F6FC30CF2
-:10D0900078FB82AD1D82EF965E2AE67CBDAB73FF06
-:10D0A0004B9767742EF0BD9B05DF97F61119976BB0
-:10D0B000FCFD24690790F1BABEB11CDFBEE311E4A8
-:10D0C000BFFAA1DA1C89E7CC7113FFBDA4C4EEDA64
-:10D0D00004ECFFEE9C6A05E191C0BC7B16C0FC67C6
-:10D0E000FFC6968CF9D97DF87B912C87FF5E909CCA
-:10D0F000DFEC241ECF352D57E8BB6E1EBF353D97A4
-:10D10000EB01916E27C59917E730113FCB9267E786
-:10D11000227DBE159689F4B79EDB039BF1BDCA6ED6
-:10D12000C1F72A514E47B9B8B7904BEB3EB2DB3945
-:10D130001D32DDF99FEDB7EBE29CFB6F77EAF2B9A8
-:10D140000D09BAFA030FB874E579812C5DF9A06373
-:10D150006E5D7E48D3305DFDEB3EF4E8F2C39B8B01
-:10D1600074F5479CF6EAF249ACF51708DF8772536D
-:10D17000091E7D14612771717CCCFE613CDD5792E4
-:10D18000FA878C7BD7043D1BF59A3E562ED7D725C0
-:10D1900032AEB7DA857ECAF4FA8D26E2D6A55CCF28
-:10D1A0007CFAB87519AFDEAE07093D47EA1321F1E5
-:10D1B000EA1E9CBF8C576FC7BB783FD448AFBF14E3
-:10D1C0007837AEA38F95DFAFABBBD74AF784E4FCCB
-:10D1D0008CF33A20E298B7DA3B7F0F6A472E971319
-:10D1E000BE4EF36ECA857A4F02BB22787618CFDD29
-:10D1F0008CBF3F50F713AB7BB9EBEAE3CD1EC8D72A
-:10D20000330BDFCDCDA1F757E95EA01CF74541DF19
-:10D210009B060A39C530DEEC681E1FC7A2AD74AF8D
-:10D22000A5EBF1385C13AC6C05BD5B25EE79DCB584
-:10D23000B6E1412C9A65ADB7F08707FC16B4A34D53
-:10D24000180B72621EE886CF2C7AC40172D1933516
-:10D2500066B28B05769DB8DDD737786FA70FE86982
-:10D2600048271310FFD0EFD0813C8EBC2597AFAF7D
-:10D2700050FDA6FDBE854DC7FF19F1FF4EE88EE8B3
-:10D2800051AEE37FEBFE85A45F239CA45ECEC4B9C0
-:10D29000D657CC4BC24FEE0B093F79FFC5758FC5F2
-:10D2A000BBD941F7688A302E4FE2EFA681DC6E1FB2
-:10D2B00087B260775E0FF95157F50AD59C68F4176D
-:10D2C000B43157B4F32A76F3FFA57B2904FFAEEE01
-:10D2D000D375C5273AF0872EEED775459FF4E71A28
-:10D2E000EED985F0091E2F25F0E1EF6BA2B884D5A9
-:10D2F00091FA7D5C3080F38753621FC3F9EDC8D388
-:10D30000F30986FE8FBA95AAE0130BDA7F6F04BF8C
-:10D31000CF5F6921B99B31EFA318A7F197F5167A72
-:10D32000E771B487917C3367A3E2DFA4047FE7ABA6
-:10D33000D86778A745FD86E4C32FD62A4EFCBD8862
-:10D34000B96BF4E50B1DFC774AE61BDFAB91FEB829
-:10D35000ABE8F5830788F3DDCDDC249789388A12A2
-:10D3600051C72897B5F9B9BF11F57295DBB128FE01
-:10D370004E9EFB2EF47785BCC302700DCFC2737C2A
-:10D3800085B9D3B8C876B87611F771DE21E23E1CB4
-:10D390003CCEA56D6F18F70F4B3F9CA87FDE7799A9
-:10D3A000CAB13EF676218FC7AF48FF9BD1BFD7E603
-:10D3B00030917FAA6D6F24C539A0DF2B1AE8E1AC4C
-:10D3C000694FFCB094E0FCB46655E73732A6DAB298
-:10D3D0007DA44F2EEFABCD1E8071FA66B7DD0DF93F
-:10D3E000FB1C87E91DAF09C20E669C6FFBEFFE8D2B
-:10D3F000E4EFEAB4F9B8BCDB56C4DF3B01FEC87009
-:10D400003FC9788EC90CA43B488B03C3693ED7EA59
-:10D41000FF9A7A258FFB7FAF8CA0F6DA9AE194EF22
-:10D42000B3E2C17BF09ED16D750B2D180AD0FC8B39
-:10D43000A585E1D0B4B9B77F7938E26D8CD2A9FF68
-:10D44000A276003F5F9A0DF716647A49EC1BC7403D
-:10D4500026F89388E75AA6D07E58AC3019DF45FCF1
-:10D460005CE62FD78B7C21CF2F59C9F3CDE27715FE
-:10D47000B6097B0BAE1B535C37DA05760A7B0CAE24
-:10D480001B535C377E47FE8579E45F9847FE8579BC
-:10D49000E45F9822FFC2EF739837394FE57EBB7186
-:10D4A00021FB03FD76E342E423F4DB85E6D16F172D
-:10D4B0005A1FFD76A1E5E8B70B2D47BF5D681EFD3D
-:10D4C00076A1F5D16F179A67C36E0AE691DF7926C8
-:10D4D000EBF25341FE1F17B2BFD16F17DA3FFAEDDF
-:10D4E00074FD69F7E8DADFC96A74EDD16F175AFF86
-:10D4F000EE1A45E7D7BB5BBC433B77431CD14F7962
-:10D500008AB711E9FEBF22BEFDBE05F545B5711112
-:10D51000D7DBC2DD1CCFF5451CEF267ECF42699DCF
-:10D5200049785E6AE5F9421EE76DA41FF48B8DB35E
-:10D5300070BF18A6E817C314FD6298A25F6C5C3A2E
-:10D54000F78B618A7E31FC8E7E314CD12F8629FA91
-:10D55000C53045BF18A6E817C314FD62D80EFD629A
-:10D5600098A25F0CBFA35F0C53F48BE1F7E3E89F35
-:10D57000B304E785F27C5F9D5E0974A8D32B9DBA46
-:10D580003CCAF3A1F5519E0F2D47793EB41CE5F935
-:10D59000D03CCAF3A1F5519E0FCDFF2DD745FB0C12
-:10D5A000E5FAD07628D787E673EB7DAFA2ED6CE283
-:10D5B000C68B47316D8E549E548065FC7DF78FA6D7
-:10D5C000A3FFB2394C498E01CE69517CD3C7415E6D
-:10D5D0001371940358AB897EAF0F95478C73083055
-:10D5E0008A5BCDFD3A91CAA3329DED71CB88F7BC21
-:10D5F000BD8C7E8F46FAD7657B3773AA98CAFAC16D
-:10D600007CE7F58CE3CB7AC43F43E68137AD31DE6E
-:10D61000276FA9231FE366B789DFCBDDB69CC75B05
-:10D620001BE92A4FC84BDB4C7B0EE37D9AD6628503
-:10D63000EE5D6798D9314B3EC2A93A1FE588C48197
-:10D6400031625DD5D7E3EF8EC9794B3B28F009BA3B
-:10D650009F38B2B5A9201AFAD17C63E8F771265831
-:10D66000B9FC80ED50AFECEF533C9B43E83B4DC819
-:10D67000E39A8F8FFFCC539378BB70DEEE99A7A20D
-:10D68000088E9356281477367227F3E03DE81C3154
-:10D69000EFFE3B032A8E57BC828F27FB2DDE984C72
-:10D6A000F7428B59F338BCD7C2062B0CF9B6841B52
-:10D6B000ACEF28AE2F03B60ADAB1BFEB7DAA5183D7
-:10D6C000630A311E9135327A5774E2E0DFEBD64BB4
-:10D6D000681F4AFDD2B996E953E81DE749BE65CBFC
-:10D6E000F1589FE8BBE7D5EE587F0B73A7B8E82841
-:10D6F000A2FBC7723EFD3C7B4C702CB21CD6640A68
-:10D700005310DFEC485C08FDC0CE9F86F8CE735BFB
-:10D71000E85DE5C966A785DEE9E8225EE7B243C6B3
-:10D72000EB18E405435C4EDDD20F93D1DEBC38D25A
-:10D73000447693C5FB22486ED03628C4D7A41C5427
-:10D740002CE2FD2EAF78B5FB7484FB1E0BF527E3AE
-:10D75000752AD2FCC926BC9FD073D3805895E4802B
-:10D76000BB07A21CE07BFEF661586F257F57F4F2E1
-:10D770008A7DFC7749857F47FECEE93C11FF559CA9
-:10D78000EB8DC67818F97B6AF29E8CFC1D5369E715
-:10D79000297E7BD06B88DFE227C4BBDF6B8AE9FE82
-:10D7A000BB31EEAA4CC87F8B5658286E6B91413E18
-:10D7B0002C13715957FB7DD39A8106F950FE4E8E7A
-:10D7C000A8C3D45E7F40BBB0BCF739CBC2F9C0ACB4
-:10D7D0003D8CFC55B3961598F0BD6AB68FD3CFAC8F
-:10D7E000655CCE99F5A287EE6F4AB9F11D21CF4C49
-:10D7F000B99244F07F4FC82FB761BC2AC0794273F9
-:10D800009888634BA474FA151EBF3AC5C1F941F359
-:10D810002BFCDD8D369F8DCB5547197F37CE409F32
-:10D8200093CD7E135E68748F04FA84FC449487A0C1
-:10D83000BF19281FC521BDA714523C649142F78827
-:10D840008CF43EC152FD2AC6DB4ED8CADC3E164AD5
-:10D85000EF40C7D89F4FA1F71834A1E74A3A36D214
-:10D86000FDEC08619F7270FB53BB9D0265557A44C5
-:10D87000FD83E9184F3C1B6D863D69191E8CDB8BBF
-:10D88000CCE1E5CF0DFC60FA0ABCFBD185DD42FDA1
-:10D890009195E0A1C97727BAB023A0FD00F9E55D15
-:10D8A000DFCBB3CE09E197CBF3C6BEEBEE1EC4F7D8
-:10D8B0001CC37DCAC5F7A5D3EF1F752517CF05B8C3
-:10D8C000E2FE981DDDFC7DA054F6FB81CC332E01D9
-:10D8D0007F5F52AE8F05301EF30E91FFF6D77FFFAC
-:10D8E000E31A07C185F26F0FFC743ABE3B57616FB4
-:10D8F0001E8F645795535D84F1D9413EA5799252AC
-:10D90000904FE505F0F7F80EC87BE006FBC4B703BF
-:10D910005DDCFF62B053CCCDE1FC9B89F7C64FDCE8
-:10D92000F7C26E3CB7E4FC4F58F4F76A65FAE5407D
-:10D93000D3BFF55E89F13EC94F93B453C83F1E353E
-:10D94000F1F7137AAAF54CD88BC8AF2CF90613EF70
-:10D950008E04F1EEB1F2B804C5196AAFD2D628FC34
-:10D96000BD822EEC3A2CABF5175BA1DDEC5A2BFDFA
-:10D970009EE353199C7E9E02FA41F96C96B5E955D7
-:10D980007B4A108E9FD4FCDCC2F958201DDF3BBAC5
-:10D99000A33ACC8D7C79799EF7EF38EF881C37F16C
-:10D9A000A377DD9CBEAEEBEE656EBCCFB8F6D09330
-:10D9B000F87EC3FF037EDA89FC00800000000000CF
-:10D9C0001F8B080000000000000BED7D0B7454D588
-:10D9D000D5F0B973672693CC244C42200F489800A9
-:10D9E000911401270981800837C82358C081100588
-:10D9F0004DC28467B46023D51A2D2D03493020DA37
-:10DA000080C120F53150A5685163B56DA8D80EE2EC
-:10DA1000BB682948F5FBDB86E18D8FD608B5DAFFB8
-:10DA2000E7ABDFDEFB9C93B9F7662680DAF5757508
-:10DA3000FDE3721DCE3DE79EC73EFBBDF7B9F9F68B
-:10DA40009E1CBB7F1863D5EDF96BD33D8CADC9F738
-:10DA5000DBBC7DA0EE72DB7D2EC66E6948B67BA076
-:10DA6000AC4A63B56DD08FB1CEECD9898C7D81BFC6
-:10DA7000098C657915C6A0FF1FF2A1A988B18F6D29
-:10DA80006C2EEFD76C9B65E867A17EACB95573F43B
-:10DA900065CCCFF82FCBCA029602C606D8FD4C4BF8
-:10DAA00065AC3E8379D7E430D60F9EC715F0F6F803
-:10DAB00014E8EFB21F5592E085C0642D9CC7DFFDCE
-:10DAC00062206376C6340BB4F783D20EFDDB877811
-:10DAD000689E2C6857E1B92DEFD83C06FD2AEC6C06
-:10DAE0003EEE47AE479633C5FAD95C8785C1BA1674
-:10DAF0003BE0DF30C46475D894B4918CADD8A8B83D
-:10DB0000E3E0D12297E7FA31505FF4BA8DAD81FAA4
-:10DB1000F4148F3D03EA9DEB14F776A82FB82DDFA0
-:10DB2000EE817D57C03619AC63D19631CCD31BCA78
-:10DB3000209485DDE795E58D1BF765ED86F958485E
-:10DB4000B3FB005E8BDC9A3D6558A47D61B3A205F2
-:10DB50005DDDEBE3BD2AADBB82B14908BFCADB7214
-:10DB6000EC0B5C587FDDB66218EE8BC341BE07FD3F
-:10DB700042D86FFA40F62AC375C3BEB6E7F0F90A79
-:10DB800074E32FC0F175F343FFF93EA8977A136948
-:10DB9000BC6A37EC3B074B37AD13E04070EABC176B
-:10DBA000C6F3D03C741E0B43419B17D7638579A104
-:10DBB0007E833B68C3791634E4DB1994FE0D7C1E2A
-:10DBC0007F53B27D38D4ABAD6E7B16C22F0160910E
-:10DBD0004AEB0B6E87A35904704971E13C6CFE6CF3
-:10DBE0005777F8548BF52E6A4EB62F363CDF68C354
-:10DBF000F39807EB698B72EE77E1B917E17A4AEC9B
-:10DC00000CDFB76A762FAE47C0F7E4ADF1EB592FC2
-:10DC100078BFA5D59603F59B05FEDE85702D42B82D
-:10DC2000847215DCF7ADF15E5CE73C7733EDAF0B4A
-:10DC3000BE9B011EF07CB1DB47F005BC083080C301
-:10DC4000A216E37946D69348E32E6AA9267A5B6248
-:10DC5000F5DBDDFA756CD99BAB005CE6D5C67B15B0
-:10DC6000803F73FBB3115F4E6DBE3E9BF609EB44E4
-:10DC7000B8267A3D53D247129E101E4B7CA92AE447
-:10DC8000F42BE7DBE4B5D27C9B705F453DD1A5F674
-:10DC90006A3AD2259CEF1A4F6CBAB433180FE6B526
-:10DCA0002F5282F54A773A95F429E952D2A9A4DF96
-:10DCB000476CBE50BA12E13355BD58EDCFA2C0E952
-:10DCC000A038871BC4B9025C5F46B8CAF617043D8A
-:10DCD000570C34D23B8E87E3FE449C7BC5C450EE88
-:10DCE000ADC322FDE5BC1529FC3DC47BC4B79F082C
-:10DCF000F860FF15D4DF62E0170BBBF8C5AEC6BEF7
-:10DD0000C82F9E55BCC82F56DCBB2FEB0E80DB8A7C
-:10DD1000A79C5E84C187CB1EBF2503E0C0AC413AFF
-:10DD200037B9AEC59FE7139F58F2F9959C5F84A25F
-:10DD3000F30B579EBFDD5B14A92FBAFFA9CBFC9C48
-:10DD4000DF8490DFFCE9A9170E8F453EC28236DFE3
-:10DD5000F0C87E1634FDDE56EDD2C38FEF777DDE40
-:10DD6000D96A3CAF852EBB4785470B1BAA89FFB2FA
-:10DD700074E6CD5522E76FC68BEA0645A3F7EA465F
-:10DD800005D5AF914F2FDC300BDE8D9C1B4CCCD8D2
-:10DD900028D827E3F095EBFFA3587F87E06F37087B
-:10DDA000FCBEA1A6C49E918AFBAD2E04CEC8E68916
-:10DDB000E7F316199F779D9BBB8BCFAF457A39DB75
-:10DDC000C6CFEDEC061BF19FB3BB12830CF6F7E157
-:10DDD0008A5FBE7D1DF4FBE0816DD94C359E1B2B07
-:10DDE000E4E786E5523837D63BEAB97DECD5F1E178
-:10DDF000A58FF2735BF8F45B7FFE9587F6CBF9DDB8
-:10DE0000BD7141E4C70BDA9EA5739CD7B4D196834C
-:10DE1000F4EACD21FCEBE2FFB5F96E06F0BDA16995
-:10DE20009B0DF9C417120E267A8052633A3A43B911
-:10DE3000A4A420FE853310FF647FE48FCFC23CB7DB
-:10DE4000DD1A9FC4AE88CC9397CFF17E616D720AC4
-:10DE5000CEB7B0B6FA3E3622220FCCFB3C1ECFE93D
-:10DE600065018C87747BBCC49BBD82F0D31255EED8
-:10DE70000EC8E7E7F82300773CE0433F67DB130871
-:10DE8000877EDF4EF022FF183C381CC47911BF7129
-:10DE9000DD76E09F0EE8377859F8135CC760C03034
-:10DEA0007C0FCBC4142A595FA86F8765174339507C
-:10DEB000E5E5E47CBE7F680F613B4B0D17E1FE2575
-:10DEC0007E9BF1D7CE1E6B1A887C2C9579EB3D1189
-:10DED0007C95E3487C95F81C6B7F575DE4FE8EE7EC
-:10DEE0007078DA13607F2997B03F40D6E294C8BEBD
-:10DEF000E4FA581EAC0BE6A9FADEF06DEB619EE386
-:10DF0000ABBDD9B5AE9EF6DB32B96F94FD9AF72959
-:10DF1000E9669183D334D04DAF30ACFB6CF3A05E97
-:10DF200028778E2B20DFE0BDE3B7C65B70FD725F04
-:10DF30003B56416758EBCE550E2A9F5C05843784CB
-:10DF4000B15DABD2A9FEF42A0F956DABF2E87975FD
-:10DF50007E0A97472C9C887A26E8039C1F84389D6C
-:10DF600074D40DA27DC9E7522FE87087135374FC57
-:10DF7000FB44AD909B2C7C2FD237AB1BC41E87A9D2
-:10DF80003A9A8F275A86217EF2F5C9F76EB3751239
-:10DF90003F648976CFE34072CEDB7E3F390DE65B8E
-:10DFA000DC9293AFC07B9575851D75D05ED990E6E8
-:10DFB00045BEB1D8E5598B72717120C78B72D1D92A
-:10DFC000927F6A0BB42F6EB8DC8BFD6F53980FE90C
-:10DFD0000BF82743B82D615D3FCD017C6DA9E06B47
-:10DFE0004B915F02BC96D4ED1BEC86F79778E3F378
-:10DFF00051BE2FDDA284E290DE2CAC4941395CEFAA
-:10E000009B827CACF341C58BFA267B08F8AB23C21C
-:10E010005F37E4F956E6E3F99F07FC83F187A20C2A
-:10E0200056715F6D1AEE83813EF238C375FB48AFBF
-:10E03000FF7F428FE968399AE819C6E18DFA3AF311
-:10E040006B16E4BB2B845C1B60EF3C7A37EA3389A8
-:10E0500016EF76CE2F7FE7C17DBEA1B2389237A2F0
-:10E06000BFE0A7037E50EC40FEB62271601AE9556E
-:10E070005B54E28F127F6AC49A176F2BEB8B78B3D5
-:10E0800018DA51DE6DC587C042D7B65CDD17F16A7C
-:10E09000D1C6C90F04408E650B389EB08667E1F982
-:10E0A0009CD99696B21AF5C2E5F59731685FB4ED42
-:10E0B000EE6C2CCF6C8B9F8BFC7E927BD6A464D8AD
-:10E0C000EF928792F3559DDCF8A9A0C79B975F9DBF
-:10E0D00086F6C0B27FEE7BC43D08E6075823DC3FDE
-:10E0E0006D730603D065D9AAF66C1568ECF338FF9A
-:10E0F0000E84E7B72C7BAE1B83FC5F09EEC8A0FE45
-:10E100009E3477147A97E529C0770FE0F3F21FBCAD
-:10E1100047E3FCC5B27FE63C787FD9F2E792709C7A
-:10E120006F6D3E34CA0DCFD70CF6FF0CC7FF40D938
-:10E13000B6C38D8269CBB61128B79F1376D4F41479
-:10E14000DF75F310EE6FA804F758F3D5B42B045F16
-:10E1500059AF0CF6227DD61F627637966E46FAF2DC
-:10E160001995D5A13E20F51AF9FCD57CAE0F9DE995
-:10E17000D59C8D7871D38ED66C942BEF27F27AC50F
-:10E180008EEBDF443EE57F2C8EEBED56467AF2C2F5
-:10E1900000D7BB590DD06B4664FE03F94E82F34D98
-:10E1A0005B0A0DF210F4129AE77D2B2BC5750CA8B3
-:10E1B000EFCC47FDEB8FD6D0623CD73F825E1BC8C9
-:10E1C000C173E27CEC8FCDEA147C1E0042427DE4F8
-:10E1D0008FCDCF250E7645F4B8C4916D21E473CB75
-:10E1E0009F4F2E50394A117EDDE296FCC935A55F5E
-:10E1F0002AE9636EC4D315BB5F99C2781D04616CB4
-:10E2000078DE2CF4B0AEFAF3CF925DB76C17D72757
-:10E2100096B53DFB6A268C734BBBD027849EB25CBF
-:10E22000D0F32DCF73B82C7FFEA87DA1DE1EC94B85
-:10E2300059DB0F34C173F9B6B99B518FC2731BCB35
-:10E240005842DBE7735783EA9CE07573FE6DED245B
-:10E25000FD707DDE41B2CB973788F1F20EAE1D48DE
-:10E26000FB9DD55BAF0FFD2DDF467095EF033CE8BE
-:10E27000BDCFE2934620FF0B2D4F6842B9AEDDE2E1
-:10E28000B26259BFDC4572FEA15A4B9E15E0AB2924
-:10E29000095ED4E3EA1CBCFF1D0949DBB1DC93C075
-:10E2A000EB9FC567939CFACCE27B7609F4BB433DB8
-:10E2B00010CF06E19177EEB3403DA38FDF5900F315
-:10E2C000A731A01E15E54748C1F68F5F3C5D88EB7E
-:10E2D000183F207C8EC1D26C4ADCBC49A82215882C
-:10E2E0007D0E0B1722BEF77989F3EB876DAC09E53C
-:10E2F0001DB3FAD86C781E42FE85E7FF0F4B10F96C
-:10E30000F11E25F463BDFE555AC0F1D617E76A52D7
-:10E31000609D6539FEFEB88E6B15DB70545D9847C5
-:10E32000CDC5F13FB6F176A9C74E144C384BD86332
-:10E33000F6CC7417EEAF5EC04BD1345607EB5833B2
-:10E34000ECA585882FF7743A581CCC3FB13381F483
-:10E35000DAACCC52926FF5022E8A2715650E7B69D6
-:10E3600098251007EBBD873982D89F394CFAAF2525
-:10E370005EC3F7943DAFFD03F97D3FF5937DBDA0EE
-:10E380007FBF3B146F3DF4A93A7BEAE1DF31B49FD4
-:10E3900083F908BFB97DFCA30A50CF3D5B7AD40F47
-:10E3A000E77D8FBBCDE11DC6C7D3EF63CF9DFF488F
-:10E3B0004AB144D6F771E7A9A77E39124B07C9A124
-:10E3C000897B549223E6F57C9CEEB1D239753A42B2
-:10E3D00016ECEFB2041505FBEF7B0FD737D1E10A3E
-:10E3E000A9A8C73B6C1FE9E50C3B90957CEA72122B
-:10E3F0002DEC0B5016FAD6F3F31BDFCB685FDE581B
-:10E40000C0EDA41B0B38DF95F09570631E8DE9E518
-:10E41000CCAF5D3B2A992542C7DF16CFCF7E3E9019
-:10E42000F48BB37B40CF88A277CAF210EA19A857C1
-:10E430000CD416161445E46CB994BA420EAB62DCE7
-:10E440007201AF729785C3678E093E026FCC786107
-:10E450003E77799EECAE03AFF4CAA1731CFE43462F
-:10E46000E7770BAEA3E31FFB1B81DC58A6AA1DF5C3
-:10E47000E7FC3B9E5F287E08EA159B2DA457A0DE93
-:10E48000877AA2E41F7EE40357D073AE07E631E239
-:10E490001B556A82777D14BE21F9853F01CA11C8D8
-:10E4A000379A891FDCA176BE6251227C624069786E
-:10E4B00038CAE10E30FDB13D6C69A3E7CF170C24DB
-:10E4C0007CE9CF0E64E073B0578A500F541D3F7E35
-:10E4D000F804889496759C3EEA6DC10797207F28C2
-:10E4E000777951AFFB386809D8609D2DC99C6FB40E
-:10E4F000DC9449F2FC6326F8C85C3BF1912B2D9625
-:10E5000000D95BF332C9DEEAEA9FEB09A2FCF9C548
-:10E510003FD5CBB660FB2C07C9DD1694C7506FB949
-:10E520007738B5BF20F9D24D9C2FB5CCD23212B07E
-:10E530007D565F0BCED792EA7F1AE936530D3E1116
-:10E540008FFAE4B712D8E3F83C47CB4079FB80E27E
-:10E550009BB718DF1FCED71D9E97F0F40E7E3C218F
-:10E56000F42775D4256E5FAF934FED4338BF1C1071
-:10E5700038FA20C22B3091E5A13EDF81F87945E4DD
-:10E58000BCC02A67752991734B359D9BC4D7800DFC
-:10E59000CE2F959FDF1A25F6F9A58AF353EA00BF1F
-:10E5A00089FFF3F3B943E5FC9DFD1A1448284FF4A5
-:10E5B000F1EF473CAFBF15CE850462F87684D7C330
-:10E5C00077266AB88F0E0BAB698B42B7EF1608BF80
-:10E5D000134A63A087F9821EE64BBC5D69C2DB70FB
-:10E5E000FFE4534E81B7F0FECF9DBEFFC279FFA27C
-:10E5F0001C1A850FF7FFB73A37DA3CC7849C78C1FD
-:10E60000E13F4A7CC13AD1A0AFEECF3F9D85728AEF
-:10E610009DDFD71FE5EEAE54DF093CBFF8C19D7604
-:10E62000F447746474DA709F1DF33EC842BD687E7F
-:10E63000DD6B445F17BBCE35CE11361C3FB934DFDE
-:10E640001686F7D34AF35F41FC393823CE131745BA
-:10E650000FD93B637416EABF87A68DCE427E77083A
-:10E660000EF000DA11566F22F241D65E497C6CB68C
-:10E6700098F35069217F2EF866E479598FFCF243B4
-:10E68000E09721D053DF07BB0CCBD3609785807F09
-:10E690009E04BB0CCBE36097E1F3A36097617964C0
-:10E6A00095979E1F2A1DD41E467DB959213B68A10E
-:10E6B000D56B8FA60F2FDBA5B290E457F0FFCD8F5F
-:10E6C000390DF59A877A1BEA4B5A40737044EA8BEE
-:10E6D000360C32D4A5FEB8A0E172C373FFCA424320
-:10E6E000FD3F16DE4D1CDEE827FF778237FE360041
-:10E6F0001CCAF01F80FF878AA6DA508E5B1D2CE0B3
-:10E70000047E928C7406EBB7CE51B85E04BF66A04F
-:10E71000BFD9F80FA02BAB8BB737CC5382C88F5023
-:10E7200017427B02E01A72027D95B92F3B89FCE803
-:10E730007AE45C2ADAF3412A6F6421A2CB4A16A656
-:10E74000FA7CD6996D87F21635B416FD76AF39FC92
-:10E75000558540C77F9FF6FB0E0589D15B3D04E9D7
-:10E760009BB952C8CE8C754EC021B97E8A5D47894F
-:10E770007DC16F0EF27D78EFA073C4EDB7C3397C15
-:10E780005C1D1E85F32F73F81F4DB5D07CCB0A910D
-:10E790001FD9FC437AC3F3B78A466721FF60BE3EA8
-:10E7A00006FB28D67C1B71B30087EA52809382F166
-:10E7B000370E9713E51C2E7B37C6D9D18F71629D1A
-:10E7C0008DFC94ADCEEC6CC4DB138D53B311EF56BE
-:10E7D0006F1C928DF83EBB69EAFBC8B727ABD3AB81
-:10E7E000F0FD63CD1CEF19BB95F4ADDBC5D91DF36E
-:10E7F000306F08DACBA7257A03B01F7F202789D690
-:10E80000CB34573EF45B28F6BDB079E9741C4FEE6B
-:10E810007FC18638C3F95F5B6CAC97337B04CF72E2
-:10E82000F09CED91763C7FB5A297BF07FBB9EE4F08
-:10E83000DBDE7C5937DE038589A9A8AFB0D16CF443
-:10E84000176AE4FD5870FD6C55F0CD9773237095F1
-:10E85000F8746BA1EF513C1F784C7136A0259203E0
-:10E86000B774F9B3F62421FC363A7F7DDF9508971B
-:10E8700077B87FA3D55945FCE3C369004758FFDE4D
-:10E8800069D76785757C41BE1F46FA067A3DFCD480
-:10E89000F5C447F695A7511CE6E0F3DCAF7C44D005
-:10E8A000FDC139D757DE0EF2F1E02E95F4BB83EDB2
-:10E8B000E75E41FFCCC136C52B406ED18F7BB07D6A
-:10E8C000D0BD23A1FD539F8DDAF7EE7A8ED669DE97
-:10E8D000F7FB62FED3380FF11537CD775CF097A3C5
-:10E8E000C85F86E03AF2A83C88FC05DAE7EC06FE51
-:10E8F00082E36FE1F32FB6FA88BF30FF5CC3FEBA44
-:10E90000ECE1C754C379D73CE434F115239F59B4E3
-:10E91000A19FA1BEA06190A1EE5F69E42F65A585CE
-:10E9200086F6C3368EA7070FABE4676301ED405E42
-:10E930005F1D7E9672FC5C5D1E47F472781AE733A9
-:10E94000B3E7001DA07ECF3C45684B7ED85ED6075E
-:10E95000CF856DB01D433DDA0DFFA1BC36C3B19C20
-:10E96000598F8575F8BBEC79E8AF5BDF6C6CD7E14C
-:10E97000B3195F3F427C7546F0F553763EDB3E901F
-:10E98000B71FE81BE17BF8D3F317C9B724FE02DFFA
-:10E99000AA42BE067CE533E463DF2DC87931ACE8DA
-:10E9A000F8CA45F2B18DCE7F921C6C75FE93F0F8DB
-:10E9B00050B9C0E3F22184C707670CC92279169CBD
-:10E9C0004BF4305FD847076DBE44F48F1E5ED93BD1
-:10E9D00009DB8F369411DD497A32CF7744E09FEC22
-:10E9E00037DFDA69F3469187FE9546FC613BE71213
-:10E9F000BEDF6EC2B358E39BFBCB79E69BE2BCE67D
-:10EA000079868C14FA665BE545CD8764D8F53EE9D6
-:10EA1000B50911BC54910F7C9618267B9CD349B93B
-:10EA200080DB91D2D189A447CC39472513F4DCD5BA
-:10EA30003EE7DC5BA391DE4A6D82DE6BE8FD32D1FE
-:10EA40006E5EC769A1379C14FCE3B8A06BD9AE6EAB
-:10EA50006BEC7B03E2FD4AD58BFCEAF0F442C2F397
-:10EA600033C1729AFFC81C95FC4CD3460EB801FD09
-:10EA70004C723D72BEB219E712D18FF629C00BFD60
-:10EA80006265366F9F68FA85191EB1C695F8B3772F
-:10EA9000DA90C3B8CF43C847B1D56F84D3217C1F68
-:10EAA000DA676F5329CE6686D3BE6943882F1DD996
-:10EAB00029F827C015F5EF9A878CE7BAA4C569E253
-:10EAC00037BD0DEDB3CBB95E26F9B55CDFA19583FB
-:10EAD000FA30D7C59FB71CE762F1E566F13E8ACDF3
-:10EAE0002F48FEA618C6030BD134DF4053FB50530A
-:10EAF0007B81B17E91787C54E08F943F47E3BD9554
-:10EB0000D1E27747AE89ABD1E7256C1AC9FD369BB8
-:10EB1000468A78F725CAED7B471AF9E085DE977CAF
-:10EB20006F61A1AF6524D269A88CE2D817CBE774D6
-:10EB300072FEA191B8DEB062C7F7A55E5523F4CF8F
-:10EB400056E77DAF22DEFD45D8037B67C4111EFE6C
-:10EB5000F529AE77FDF5E7A7499FDAB7FB8EA4B09C
-:10EB60000E6F9609BC39DD3E2409F1F0585B7D92A9
-:10EB70009EBE65FB19783E7664445EC75AF7979649
-:10EB8000D7CF0A7B602797D737599BA3DA03FF6A51
-:10EB9000393D595D497A88595E9FF67892DC041FA9
-:10EBA000417742AEC8B8CF5F6D9E24F4171E0B723A
-:10EBB000B922F9FA41131C4E201CE222F224161C41
-:10EBC0008F8BF7651DEC511BCE5FE6F0BE928AFE7F
-:10EBD000970D8A17E35E989E520CE77C604EFE8F7D
-:10EBE000D16F25FBCF2F52492EC8793EDAACB4A1A4
-:10EBF000DFEFB595FBB2BF07FDAB773989AFCAFE32
-:10EC00008BA61BED2CB33CFAA8F193B746C3BC65A9
-:10EC1000CDAAD701EF954D2FE9C3F56AB7118F043F
-:10EC20005D9ADF5F6AAD8D7A9E66BE57367D35E9A7
-:10EC3000EB87C47A0FED1D63F324767FAFCCCAE176
-:10EC4000B014F4CDD530EFD2864F48FE2C9DAE7A6D
-:10EC5000512D79ADA97E26E2FF519FCD82F471A49A
-:10EC6000ADF74C8453608EEACD85FEFB9B06111DEB
-:10EC70001C6BBABA2FCED74BC0EB747B9C05FD4FF3
-:10EC8000A77D3616227B3944E7F9514319D9C7A726
-:10EC9000114E78FE5637D149BF22EEC73A0AE370CB
-:10ECA000FBD9C3F4F1C02341B53418852FF513F314
-:10ECB0001D3FFF43C2AB5783FB08EF8EB6F1798E41
-:10ECC000AF7427619CEBB70D85248F8F4D87F1A121
-:10ECD000DCBB7BE97D98AF777A834AF2E374FBF57E
-:10ECE00033B17E688394BB5C1E558BF957EF1E3D94
-:10ECF000A318DA3FFAB98C6B72BA5E20DAAF9E7550
-:10ED0000F8BE62BD3CDB35D7B0FEC3C1E3646F9D86
-:10ED10006E80B7018ED53306D9D11E5EB4CB786E26
-:10ED2000E51B8C74083F577EDF489ECBA206D06758
-:10ED300081651D9D5E4676F4EC406F93BD6DB4E336
-:10ED4000CADBB8BDB7E0E1B2A210D269E0131B9EE6
-:10ED50005375739C619ED92B8D76DA02935D66B6EE
-:10ED6000DBCCF245C263B9ACB755D23ACC7A4B375B
-:10ED70007963ABAD8A961F5155C4F5B16AA0CB74C7
-:10ED8000F42B33EF0CB4BB8E017CD7C378D576F768
-:10ED9000DF73414F3EA2B2F1E44CF30658B1F41BCD
-:10EDA000E8E65BD0A09AFC1346F882BE7E0AF5F92D
-:10EDB000A6DE420E0740AE24A29CD1FC4528272E99
-:10EDC000D61F70D1FA7695D0B7AB0CFAF641ECA20B
-:10EDD0007B7F6FF9F5E4773A3CE37AD2BF0F77F99E
-:10EDE0009D7C06BF9384EFE1E965067D52F7BC1771
-:10EDF000EB813FC6D21F8F0AFE7A44F89DD60A39AE
-:10EE0000D320E4CCE1E9C22E4C65442F56ABC62E8C
-:10EE1000862F5D481F5BD0D0CF745E4639E32CF15E
-:10EE2000B716015EC4A50F353CB7B90B8C7463C22D
-:10EE3000CF7E8CFBC1EF46DB1EE05E5FCEF347F179
-:10EE400039E6B148BC64D01FE573F986A1C1F5BCB1
-:10EE50003DA01660DA1B43158DFA5B795D53783D52
-:10EE6000E012EDAAC85FB341FD688E772EEA519893
-:10EE70009FE34CE1ED8822FD009F935222F88FFE24
-:10EE8000F9781E220F24C17BFDE7E4BC8CF48D7958
-:10EE90003B9741FD5745398437E9E89A2FA0F14364
-:10EEA000989F13AE9F40745CE648E2717690B33D44
-:10EEB000E3DF6A6EDF94F6A6C9FA5BF97A62E2B321
-:10EEC000E877097AD56B442FCC42FE938DCE11366C
-:10EED000C4DFD92E5F16C201F0BDF276B4D35FB4A1
-:10EEE00093BCDC5BCEFDAA07A78D7EF836783EE2A8
-:10EEF000191791F1C1C580E724173A13F5787B649F
-:10EF0000E5710BE6D3FCA19D79311FF1C8AE8A579C
-:10EF1000DE8471F6AD5C786F11D2D17ECEC7CDFEA6
-:10EF2000D89267C6913CBB6E864A79DA874A55C645
-:10EF3000F97C82C1AE88F86955C28F4FF758A91D78
-:10EF4000F3AAF2308F0AFD95986F552ACE45E81541
-:10EF50006DE21C9F10FEDA1D826E5A04DD6C127485
-:10EF6000B3CEECAF7D88D3CDA1763004404EFE6E9B
-:10EF7000FAC289E487DEC2289E9C334D5D3F12F6BB
-:10EF800077799CD786F02B999ECFE13947B1601CE9
-:10EF9000A6AC34DF86F47E796F8FCD477AD62CAA63
-:10EFA0004F9A934376FBDE95658964BF277AB390C9
-:10EFB0002E074F8F0B5992D00E2C243E71E5198BE2
-:10EFC000815EF2430906BA1BFA588AA17DC8964CA5
-:10EFD00043BD8F6FA0A17FEF52233D260C2E30C979
-:10EFE00025AEE749384F56C791DFEA48445E52BB29
-:10EFF000B4EFA4FF4DF6076819F85A93D0074740BD
-:10F000001DF3E2D6CDA97760FEC3A76D562F1FBFB3
-:10F0100082E4BD23E77907D2098648314FAA49CA5D
-:10F020001FE18F671A33AD6B03C378E9915246F83D
-:10F03000143F9829182F6811E77DBF9817F86A893F
-:10F040008DFC6EFC1C7B4FF7513FE633DAA9E94893
-:10F0500067058827FCFD27C4FB3B04BE1C29FDF186
-:10F060009A04C487B98CFCF793D5656B302E78640D
-:10F070003A233A690BBD9480EBC77130CFEF57B19B
-:10F08000C699F3DC1F6FC1F5ECB4D338658F815C92
-:10F09000043C197AEDD10FDE46F06D71EF8B67DD20
-:10F0A000F5E9118F695E044EDE1916B25119D2903E
-:10F0B000FFE49D39A0615C6FE85F777EF034C3792F
-:10F0C000B95C6812F86DE6AF3F7DFC170BD663B9EB
-:10F0D000636BC17B507E63CD839975503EB1E65B17
-:10F0E0005B6FF344FC9F3B662EDDDE02F521DFFC07
-:10F0F000FE93CF235ECDFCFEFF791ED73BF31F7F2F
-:10F1000076C1FA2FAB4F6448DF727DE679D259930E
-:10F1100082F14DE4A3C497AD01AA57078C7A7759C1
-:10F12000A9D3807FD8DF0AF02BABFB29C589D3C5D3
-:10F13000FB8766DCADA830EF7BD59CAF1C5CD5D9D6
-:10F1400032C946FD43D81FF824E55DF6EB0F6C0588
-:10F15000DFB707148C6F8382E4C5B86D06B4233F14
-:10F16000671E0FE93BD9127F055FC1EB0A8CFC7B60
-:10F1700056C2B33C115744FE8BFCBE6ED440E2CB6A
-:10F18000FD5C4CC3F32D7D618382F966EFFA3D5E31
-:10F19000D20B56B1CD93C0EE1DAAF2FC89BCD2773A
-:10F1A0006FC07381AD5AFD059171778ABCA6D217E5
-:10F1B0005C947FFDEE4ED736F2EB1F9869D1EB835E
-:10F1C000137FFAD1CF7E8BF8551D4FF865D65B0EB5
-:10F1D0000AFAE8AADB3C0FDF86FAFE8B0E6E27697F
-:10F1E0009E2CB2BBBD9E2CCCC3E9EAF77D191FF360
-:10F1F000FE19F9F9EC0A27C50D649C482DFDA411F0
-:10F20000E9717E716D11EAE399780EBD23F1E8F79B
-:10F210006EB253DE404049A0FCF25871E79DA372E4
-:10F2200044FCA5F60A5A07AB1D8DE5B9B9F50FDB0D
-:10F230003DB1E5558338D758ED363BF3478B0FEF9B
-:10F240001CC5F5D07A3C079BEE1C5C7FB801E3BC83
-:10F25000B1CE81598305942FE9700CC67C8E34F1B0
-:10F26000B8D5F983B7505E751CE6F22AADEEB355FA
-:10F27000487FD20F5195CEBAE2601ABC6713EFA552
-:10F2800009FD1B6918F5EF2A11FFE9A86414FF496D
-:10F29000AB3BFDDF089F8D62FCAA77F8F8766B68C0
-:10F2A0002FE24B95CB4372A7A34F9217EF27B1F3F1
-:10F2B0003CCF2493717C4C33EBF7A809E9D69D969B
-:10F2C00050F13B541FE68E672127E28FE2A079338D
-:10F2D00057C6517EAAD4AFD2EAEEBE551D61184F73
-:10F2E00041BDFADD0A6E3FA399DB356E8E41AF2238
-:10F2F0003DCBBC0EF95E878DB5A33DA9D3B3480FB6
-:10F3000063FA790619EAC22F66ACDBD2ED063EF14C
-:10F31000EEF9B25EB55C0E785247717F1CC243EACB
-:10F3200063526FEB36AEA0779D7E19407E21F321AC
-:10F33000BAF4A41A9D1D35B0FB7B32EF4C9E83843A
-:10F3400067ACF79D25DAB951941711A271FC6218C8
-:10F350008BD3954DF035F14B605B3C2F5EE8A1A05F
-:10F36000451AF211A45E29F97387E0BBE19C30F9DC
-:10F370000165BE777F78271BDE8F1F9DDC952F8F61
-:10F380007AD091551F533CBD0AF550983FBCE643D7
-:10F39000C37D92A69292F8D1E46F33E63DE8E2A8ED
-:10F3A000B45EBFE09B935517E59F74B0042FF2AF96
-:10F3B0008E80D0C7FEE4247D4CF20B337F98E1357C
-:10F3C000F2FF6B8B8DFC7F96D6DB144732FAB3CA03
-:10F3D0007DA6F8F63BD30C7C53F29F3B542F6DC2B5
-:10F3E0000A821EE334FB05BF7C5BE88176564BCF77
-:10F3F0001D98F73908F97F1B952E7680CA24D649C7
-:10F40000A59BB9294F268579A94C653E2AFBB25A9E
-:10F410002AD319CF8BCA646D54F66707A8CC669DB2
-:10F42000547A98DB82E540E6A57230F351E9636EC9
-:10F430008A7BBF9318CE3A04F09B7E3D233F3C630A
-:10F440003FB9518373EA2897754020A4ABC94C207B
-:10F45000DFE3376A589F26EB3B78BD84F72FFDE545
-:10F460004F7F141846FC46B43FC1DBBBEA3B6F2C10
-:10F47000213AB5507D0EF687FA8323B569A3015F63
-:10F480002B4733E2A3E70BB56FEAEB0F156A33F4B2
-:10F49000F5978BB46BF5F58F0AB459883FB29E5936
-:10F4A000A895E9EB371769E5BC3FF71FBD63D34863
-:10F4B000DFC50529A338BEE1CFA9FA2B090F7729AB
-:10F4C000563CD738416F763C4715E9C8EB88C3D224
-:10F4D000C7F377C2F1AEB0D3D283FD63A2A330F2FB
-:10F4E00027C0C3E18AFF665C8F999F280191079826
-:10F4F0006A8C8300BE93FF2CBC92DBE98C456F972E
-:10F50000F35E08CF99A6F3DB0E8C8C1B6B1F66FC99
-:10F510003D20F4BC8342CF7B47F899BBF61DB6264D
-:10F520009F7244E838B67D6865A7F4FCB2DBBE3F45
-:10F53000AAB4015D87EBE2DC28EF3AE2D9DB68A7E9
-:10F54000050EAB0CF58C4B5D6F69E1940708EEACD2
-:10F55000BF9BE20A725EC1673AF09FA0E75CDE4B98
-:10F56000DA975E078737B73B92C5BAEA27A55C935F
-:10F5700047F137AED70FB31D983515D699B681FB35
-:10F58000479390BE3114F6CC9FDC18176B9E6C61CC
-:10F59000C8A71A05FF34FBDF364E5AE1D6FBA71B7E
-:10F5A00093820AC6233343F1DC0F91CA82F12847C4
-:10F5B0004BBDA594071350DDA558AF6033F3A0BE33
-:10F5C000A045F594C2BCFB5A9E5B817ED84515765A
-:10F5D0008A4BD8B42914BF96F9182902CF1BD6C577
-:10F5E000794308C73E2EF2CF0E6B2C28457BB7DE41
-:10F5F000959282B89852B184FC87F52EEFEB784F44
-:10F6000023E0B6509E21736B8E32D057B6DD662D47
-:10F61000453E9EF5ECC82455B7EEE30D67E331CFC8
-:10F62000FD51B785DA1F5D39D1B1C485F711C15ECF
-:10F6300080729FFB9886FAFB56E89306E3DD5773CA
-:10F64000ACF9B21ECE31A9D46EC05BA7D7588F33A8
-:10F65000F91F6D26BDE0F06891F7318A8DC273BE47
-:10F66000E2C9F364FFCE7779C83F3EB149A17C97E8
-:10F67000F05E6F36EA9BC7EF1D42FEF0862655F816
-:10F68000A3BDE48F0E67B16CBCB753DDAC90BEAACE
-:10F69000367CB21ADF1B90E7C9C07106783B33DCB9
-:10F6A0003AFA7BF4FBDF8D4779D78017CF088F18A4
-:10F6B0008D23ED55793FBCDA7DB692FCBBCDBFF70B
-:10F6C00021FC93350BD1CC115B301DCF7F7DC96CF4
-:10F6D000A24BBC6F857A4C377DF47358A7EE9E41E0
-:10F6E00063EAC0049C3782BF1AF9CD4F3417927E6B
-:10F6F000B4BD6922E5F59BC7B967156B43BDB5710C
-:10F7000095A32D9AFE7B4FB62F1BEF619FDC58B25D
-:10F7100096C1F99FDC7B533ADE5B5FDC1CC7E23DA0
-:10F72000DDFB9FD8389AE65B8CF7A171DEE659764F
-:10F73000942B535B4AEC08B77B56CD7D563FCFC721
-:10F74000257E6731D09FB3F959C213170B0510AE50
-:10F75000BFB94ACB46FDE2442E8B9A97D9A798C7EA
-:10F76000177F7B958FEE999CCC8ADE2FA398C71FBD
-:10F77000EF2BF6487FF1DB4B53C91E7423BD1E6F80
-:10F780002A4C42BCB5611C1DE4A2ADFDFC2AC4FF9D
-:10F7900073150BDF5B0AED8DD3AE3B83E515F65A8F
-:10F7A000D29BD91F54A207D00BE9BED7DFE638DCC5
-:10F7B000F5BABC40D41F35835FC3C7D0FEB035A9AE
-:10F7C000213BF077DB9E53A48723BE6A3AFCA5DF7A
-:10F7D00028A1CF8B7C8FF451747F8E7E8DD75C17E0
-:10F7E0000C318CA32C74443BC7D8F3EBC645FD7693
-:10F7F00012D3E275F383540C915FDBCFE7EBEA277A
-:10F80000DAC10CD5687D422F37B7CBF50FD962A48A
-:10F81000CF6FE2F91445F4F358EBFD46D0F85E4D96
-:10F8200031137916330DF432546D5B3106CE8DBD34
-:10F83000CBF93FD875CC17255E15E1B3B0F6BE0203
-:10F840007E00CFB5A9B3C93E89B50E7BF080963353
-:10F850002262BF7D23DDB82ED9AF46E05D5C908586
-:10F860006C495886E85E461CBC8FF2FBD38AEFB821
-:10F87000AF894217B234F32DFC79F0BB11F2AC4CD6
-:10F880007C02D160B0D4472CFC7D4DC7E7123773A2
-:10F89000FDF7C41685F4DFF51B795EC4A741A89374
-:10F8A00072C1CF09558B2F84B2E3D2DD1F5CF242C7
-:10F8B000D37D433D06B82D62BA78D29927EF7A1BE3
-:10F8C000DB4F3F7D970F977B77EAA224CEB78E2E32
-:10F8D000C0794E5E6E277F0CFE1C123FA0E3D26003
-:10F8E0009C010FD7EF7E72CB02943BBB1D5E4CAFE9
-:10F8F0005BBCC5D81E97AEDB17E3F81530C0293CBA
-:10F900007016D0D191EFFF84EE792720FF447A5C06
-:10F910001947F7BBCC70FE6074D7F742983E0EC70C
-:10F92000C4BD0E4957C736D49F54619CB52BED1EFC
-:10F93000FA2E82C9FE3AE299A5A5EBE2BDF695FC46
-:10F94000BE25D3DB890323FB97E31E092C74785C67
-:10F95000DDC7EB867731C65B58A2ED2A06845D567B
-:10F96000E27B1ACBE31B16D2BEEBDA571E7913FAF1
-:10F970003425F87F867CF3D88641A314BCF762F562
-:10F98000D0FDBF86064B3CF2FDE6366BFC6084770B
-:10F990008385E47C735B6AC260944B2E0BC549512E
-:10F9A000AEA83AFFFE49C12723F2C397A4D77F121E
-:10F9B000043E9ECC13FACF24AEFF28CFEC21BDA38A
-:10F9C000A191C7A9A4BEE116F8E316F1C858FA0F31
-:10F9D000321E5C7762D12237F2B5C624FE1D8D45FA
-:10F9E00093BC01BC9779B58B91DC1880972350CFDD
-:10F9F00072B1E05498477573FDC6DFCC489F4971DA
-:10FA0000B9BC08EAB4966080D6AD713A73C07F087D
-:10FA1000CF843C8DE1F856935E6137E90DAAA9DEEB
-:10FA2000512CF250841EC184FE2DBFDB90786FCF25
-:10FA3000793DD2AFDB2CFC13A03F05E8FE47310B2C
-:10FA400022DE324DF3A4F68DD801E877C4F6F462D5
-:10FA5000B6AD5E177F52B457C96F20FD92D2FF201A
-:10FA6000FD1C238AC15E4BD2F9237E0DA6A54AF167
-:10FA7000B0CF104F72801D903D398C29FC9AC597EC
-:10FA8000D4D3EB2E2EEEF3A397F83D9F064B82774F
-:10FA90007B4EF77E19E3B8DF2C611FEC0DF5DAEB36
-:10FAA0001D749F66B2BA8BEECFB78EB4F03C65760C
-:10FAB000C08DFA40F218CE776F2FF1B9C7202377A7
-:10FAC000F972106F001E011BDEC3137EDBACDB0777
-:10FAD00026A03EFC5EC6A98DA897071A2DC46F24E8
-:10FAE0001C73565B36211AEAE273216B4124CEB6B1
-:10FAF000DE773680F77ECF5FC9EF1125CC3AB1179C
-:10FB0000FDA0EB065BC8CF7E77A246713BA01F87A6
-:10FB1000CAE375AF63BCADC9939282DFCF793A99DE
-:10FB2000B733718E0F24F6DDA6CF17E9BC92EFFB39
-:10FB30000125BABEB2F74ABECF8EDD00C85EE4D75B
-:10FB4000E2F678607F85E6D2D591F6E0FD1F06B833
-:10FB50003D3D6AF7FE8AC060B29344FBF90AB2E702
-:10FB6000D1C708ED1B776FAE40FBFC919CE8F3DE3C
-:10FB70003E8ECBEB47DEF00F407D36BC1BF0A75727
-:10FB8000B4F30D314B318D9B8D71A9F09D7173A331
-:10FB90007D8FE6CD719C9FB4425B5CAF881EDB5AC3
-:10FBA00061D65383C4AFCED51C7B85D2AE817F1482
-:10FBB000013D24B3E8FCF2C2FAAA371DF5CEFA3BA8
-:10FBC00095B5C83FEA415FC5B8609ADB4EFA6A4313
-:10FBD000F2774BF05CCED53037DE5BDD0E6A1FF27C
-:10FBE0002FF4ABE27DD4A9759CCFF8DDDCCF0A768B
-:10FBF0009CEF6AC4C70C2BE1A3D45FAD159CFF5CDE
-:10FC00001EC7F38B3B925DE4374DAEE3F9C4CE00E3
-:10FC1000E8B3B8BF493C1F5883FF900F49FDD63564
-:10FC2000CC6AC80BB69BF286ADA63CE16F8F31DA89
-:10FC3000338945237BD4AB7E0DF62FAE730FF01FB7
-:10FC40002C43600763F912D8ED58BE0C763BC60D05
-:10FC50005E5D9547E5EBABBCF4FCCD55C5544EC895
-:10FC60000E535C91FCC8E4BF612185FC7812BF5E35
-:10FC7000EE3F11F1BD84B76FFFD5CC4703FDA13D29
-:10FC800055F40FE45422FE75D5D9B595D8BF2A9DF9
-:10FC9000D79D636754223E4E9AACAD1B0378D2C702
-:10FCA000E2AB6EC4BE77C579A3D9F77DC7CAFB5E48
-:10FCB000D1ED77869F3A30FA735A894FC4F0E73C0A
-:10FCC000A0F075EC7D61F343E887EA35CBEA433C6D
-:10FCD000CE1E68F4F37F3E86D3C5D4B19C2EB3DF2D
-:10FCE00004FAE801EE923E62B5D7EF061488425757
-:10FCF000B26C4D64E3E99E75A57D6EB47CA66D8201
-:10FD00006FC61CDFC53C715744E8ADDE65A6B73051
-:10FD1000C577CFD57D672FCACBAF4E6F8CECC37044
-:10FD2000A546F23A0CF486FC5CADE1F4A65AF93D26
-:10FD3000CBAAFDDC3FB21DE90BCED98FF406FF9CA8
-:10FD40001AE0F53413BDD59BE9CD65A4B730D21BBD
-:10FD50008C971CE0FA85B3A2ED6BA5B73F7F457A7F
-:10FD6000FBCD5561CA6BE8C8A9CD40F8B48AEFDA7B
-:10FD70005D2A1DDE35D6CEE5C1708DFC020D388EB4
-:10FD80008BF4F90DF8BD94A9FD575B53007ED35356
-:10FD9000F3E97B023963FB0A7A38E0427FCD024DFA
-:10FDA000FB94E8EBBA33744FB18F85D36FDFB1AFFB
-:10FDB000913CC86A3C386B2AD2DD9D2AC949F3BE02
-:10FDC0006E1A2FE25B0A9F174E2E431FD77308BA95
-:10FDD000F4DC59AF38501FAF66DEDC1CFA3E0C7DF8
-:10FDE000B7E6870D7F73E3B8378D4FA1757956BF9E
-:10FDF00093ECE7FEB574B4DFE86A7241777A845F0A
-:10FE00009BADAF819E93C7F6E09FBD10FFB84FE852
-:10FE10000F78F4A837F8C53D4C19178949CF263F0C
-:10FE20006E4CFFE1700E1FF3FB67855CAD17FE5F44
-:10FE3000B3BE27F73FA4C43F0CF7A7B85EE57EE04A
-:10FE40003DCC83EB9471B3AE3C23A91F0658B01E82
-:10FE5000F56D2BA8327DB9BA81E375E51F093DF137
-:10FE6000C512FF681C771BF3EC45F9E6F2F27C053E
-:10FE70006789564CF0FC927AE086124D1BDB035EDC
-:10FE8000BD38459B34B628763B3B0FA38C8AC4B55E
-:10FE90004A6659395FA853041F70ADB543BD351983
-:10FEA000F89907F576BE6F37F00D0FD919463B620A
-:10FEB0000A3A23916F201F21E06AD3312F32498CF7
-:10FEC0001F91D7E157502F0D036C3741535280CB10
-:10FED000EBFAFD9CAFD881AF505CBA98DB09F29E7B
-:10FEE0008F739897EC2F55EBD97EB09AECFB256376
-:10FEF000051F296023116ED916CFFD63E079E183D8
-:10FF0000930F8D81C7450F2FEE8DE274F4B6C63284
-:10FF1000FC6ED74D8F9FDC867ED231FF15C7C4F7AC
-:10FF2000D128CFE05F2867E85CB6ED79B72260455D
-:10FF30007E151D8F0BAFE2782CE3AC3DE07123E121
-:10FF4000B188735E021EBB2E80C7CD884F51F078FA
-:10FF5000E357C4E307715C0D0F01E34653B41FF58B
-:10FF600084B75B276B8FF6D4AE8B1FF0FC21564312
-:10FF7000F6B38C5F9AD7D388F235B707BFD4BAED02
-:10FF8000F168CFD6D76C7F03BFDF585FC7EDEC8E2B
-:10FF900044AF03F38D03BF57E9BB54B1DE47BB3B0E
-:10FFA00000CC72E8553C0F7ADF9D71A109304EA656
-:10FFB0008BCBDB4C97C630EFDBEA0EDBFC89A8AFBE
-:10FFC000F918DA19F6540B0BE8FC3157D80E905C8F
-:10FFD000EE00398EF401F4C9E92D998F23E5F384FD
-:10FFE0003BEFC7480EBBAA13E4A08E4EDED85D4C93
-:10FFF0007EB8C4A2E757E07B6AA5DD83F83DE173D4
-:020000023000CC
-:10000000909BBA794A4013D1D7AF766418C699EC61
-:10001000CE31B44F4DFF86A1FD1AC0173BC5B1F9D3
-:100020003D3FA9D74CF3E41BFA258B38C737F3C6FD
-:1000300018C6B3AAE7378D46FA177AC438F80FE91D
-:100040005F35E90B667DC2AC3F9C1C6BBCBF32C206
-:100050002AF2D0AC3C3FA29539E8FB12C007E9FB7D
-:100060000555913C01A29311F6F0F67BD0AF32CF4B
-:10007000E10DC0B386DDD7A4578F8CF8CF5AEBB80B
-:10008000DFAFBEDDB10DE961ABA04B495FC3128F9D
-:10009000CD6324D7ED0CE5B1995E65BE93F41748A6
-:1000A0007F8252C3FD0CADE37378DE91E03FAD1566
-:1000B000DCFEFD91128A570671BAF4A444BE339750
-:1000C000CE94C0344EDF5A8A2855918F2AF35E7140
-:1000D0001CB4B3D3F97CEC759E37B9FA7BF8BE9BA0
-:1000E00005FA0B7F46564AC44F81F909CBF87B814C
-:1000F00069E2BD0122DFB2175F7F68B2986F049496
-:100100006AAD26FCD37E2AE3301E0EE540C59B80F7
-:10011000FE8F41AA8F022D4922BE9E29E2E94E257B
-:10012000C499C797E42357001BC5BC0496C2BF13EC
-:1001300032F1A72EA6127DD8B7A33CBAFBA8F77759
-:1001400098AADB90F8DDB726C0F3A6DFAB5EF49388
-:10015000DE9D15780FE9DA0AC81020BF96AF1ACFD6
-:100160004D9DE3704F85F7D4C0B6D518DFBDC21ED4
-:10017000DC4BE7B9268EE83D0CEF213E6C4D043A8E
-:10018000457C454FD7A8483E908C6384C7781D288E
-:1001900047C3D88FFB9B0DFECF28F926E42FB58AE5
-:1001A0007A836B3BE9EF6B53EDF8E54CCCEFC9AECE
-:1001B00043BCEC93C0EFD3321E371880FF18A4E382
-:1001C0005BEEE87E4DD0D7080EE1D54BD37BD2BB9A
-:1001D00062C6515C96903DE9E2E3288D375F170CCB
-:1001E000E9D629F7BDD6B55D59C02E657E668CA3CC
-:1001F000D4302D7E4494384A38A8E03A07D4F038F9
-:10020000CB00E1AFFFB2711475FC978BA3C8FDCE94
-:1002100010FF9E0E882DEE0D533C81CECB12599FC0
-:100220000E7E8F113F22DC102802F56B45FDAD5D7F
-:10023000073F7A12FEB97FE74BBBB0947ADC2CD132
-:100240003E73C8677B30776BD6BA15228E658C3FBC
-:10025000CC00AB4EEFE7C7FBFFFAFA2CD37A265A55
-:100260008D7182492E63FF29A9C6F6D2FE71DDCEBB
-:100270000DFDF2B45FA5FB7EEF76DEC7F877A374C1
-:10028000E7A05EB8EEC0BC398CFB78BAE3893E0EBD
-:10029000E07BD1CA524622BE58482FDD1A58BAB95F
-:1002A0001CE8672DC851CE8B3D06FA8BC43D4A35FC
-:1002B000C427E9EF8F454FC75C03C9FF3FA06E6FAE
-:1002C000DBA4DEAC2B0ED094E0FFC5958037035C39
-:1002D0006715D44306D4BD4CEDD7CD2BEA118F72F0
-:1002E000EBF6B54DD27D0F30D7EAB3A0FD9C5BF79E
-:1002F0002A3D8FA9CF77E72394B7962BF042E605E6
-:100300006EC5BC40807B6E8DF8CE6F4BCFF96F52BF
-:100310001E36E8F2FB2899C1A330FDF852EE75F3C2
-:10032000A733EEF795F375E5059AE6ED927F6E2E0D
-:10033000FF9C25FE0E845FD7BD0C718F03F61D3523
-:100340000FF4E49522DE143B8F8DDB9D735E7F0FEF
-:10035000C7BF64BB33C6B813B2C395D1EE47FD4DDA
-:10036000F8AD3AE2C359E837E8B045D7EB3F9E34E1
-:10037000E51F57F660C761DE2CC232D63ABF6CDE8D
-:100380006CF6180E2F196F95F9B3322FF642F9B3A8
-:100390005FD50F3F44F8033AAF64DCCF6F8A4398D0
-:1003A000D79B33AE2BFEE019D743FC41F67F2FC31A
-:1003B0001ED52F5E3F5EE049F7FB47941F0AEB4DC9
-:1003C000D5DB41F23D99976F1E0FECA2C2713A7FC7
-:1003D000A07F752EF9FB74F696CC8725FA68157EFA
-:1003E000882E3A30EB85221E62D60B657C44A9E04C
-:1003F000FE09A08F89E3FA70BD0BF3D2A59D27F308
-:100400004965DE28E685523CEA4BEA555FBB3DB5BF
-:100410007A32E575D5BB27BEFE55ECA9E5E38DF62E
-:1004200094DFC5FD0E7EB4A78677B7A79A4AFC373E
-:10043000E13999EDAA233FF890F263C10EBD99F01E
-:10044000EAABF209937FCA3186E3B794D3D29FB661
-:1004500077B0C5E0779DA2AEDC4BF9E235DCDF92E8
-:10046000A9B5919D6677D93DE86FB14EE274641BE2
-:10047000C6821A8FF3927F45E695A5B8B83D65F61A
-:10048000CB483B312CEDC400FFAE4AC77E1EB7758A
-:10049000A2BF053B9672B926FD2DB654E16F31E53A
-:1004A000633B4DFE15B3BFA5659CB0BB84BFE51192
-:1004B000C5730F92FA735B26FF1641F1F387163B63
-:1004C000D1D4FF65B0F19BC2DFF2A00BD6B7FB3DE4
-:1004D000A3BFC51CFF8A12F722E7D59BE3B653DC06
-:1004E0004DC257D2ADF46765D6F1EF024C51772972
-:1004F000C85F5A5D1CBE2AFAB35223FE2CE5998FC1
-:10050000BAFC52981FD73D4E5EFB06AED30A0C676D
-:100510007D34FF9680AB391E9554C7FDE35F973F4E
-:100520002B34CEE8CF2A78B0F07EFC3EF1C887CBE2
-:100530000E61396ADB777ADF0065F1E3F79761F9DD
-:10054000F737C239A8779AFD58CFE0C78CFB74877C
-:10055000AF198E124FFD35124F5D76A2DB0A0E47A2
-:10056000339CD2348EA7B980A7A02274E15F4732B2
-:10057000A7CFCC49DED7D1BF3660989545C3636B12
-:100580001DBF0F2DE1B855C031A56609F909CD7819
-:100590003AA0E5D2F0F38C097E3FDB52780FC2ED32
-:1005A000F987CA7E8BE52F82DF7122DCDA1FBBFF61
-:1005B0009B027E19F45D5C13FC26C580DF042FB717
-:1005C000AF274FF4FF1DF9F335C021D01FB2BDA9ED
-:1005D000C0618C0319F969DAD7E49F0A77F153F601
-:1005E00076EE25F0D32D26FF545A80D34D5AE028BD
-:1005F000D16726D0673CFAAB6AB81E09623FE8545F
-:10060000D0E6E6FC55CA35643916103E5BDD3CEE9B
-:100610001CC54F19A2EFF69AF8303A70F4780772B9
-:1006200035FBAA3E1179B7B586C7D15E9BE4F3E0EE
-:1006300073195773966839577D35FFE337AED2F992
-:100640001F014F69FF2AE03B7EA7FC6A902768FFE5
-:100650005B6BC236942B5575B72A7E285F1CCBCFB7
-:100660003F2DDDCF30CEDADD5F174E44BD7DC2E0D9
-:100670002E7C28BE4A870F57DC79EE7EF473C5C204
-:1006800087CC18F94A17C6878906F9DADA850FB5D3
-:10069000EB2E4BBD787C68477CE8A3C30741FF691C
-:1006A00035E107917EAD021FAC6EE063000F15F1DE
-:1006B000605824EE29E9212CF20FCCF0090706C579
-:1006C000C84358A114F7B0BE8BCE3F10F1D07A11B9
-:1006D0000FF5D7F17CD98E3BE3A618F30FBCB4EE2F
-:1006E000A9AE5A459FC71F254FB616CF4FC63965CD
-:1006F0005C73F244DF0AC49F0979FC9CC3B1E34CEC
-:1007000021BCDF0AE8E736E1F9F708CFE5FD03A1F0
-:10071000C7BD36495B89E38EB00729CF19F4BDD533
-:1007200058DFBAFB49FEDD5CE1879479795FD96FC8
-:1007300096640FE27D49E9376B4DB46FC7F3AE663F
-:10074000E1C9F4BD5E8C53A0DFE9DE38CA6B5CA85A
-:1007500080E10DEF7F7BA27F33D11FF3513EAE7F4F
-:100760008EC38D7A7E43F29474E41B556B5592EBE5
-:10077000B1EC1B496F55C06F88DEEA38BF4903FCF6
-:10078000227C0B28C46F3281DF70FEA331D4EBAC26
-:100790004877AEEEFCA6B507F85F24DF790AE11CC6
-:1007A00085EF3C83CF757CA70DEB5F16EE7957196B
-:1007B000F90DC60368FF485FFAFD9BF5D9AE7D1BB6
-:1007C000E94BD2DD7F009DFD19E11A85CE8E209E7A
-:1007D0007D053A3B1383CEDE37D1D95FFF4DE9CC9F
-:1007E00032BEE8C274B659E095CCDF967AC550B5F2
-:1007F000ED6C2ECEFFBF9CBFFD1D915F77A1FC6D00
-:10080000FC5D8CFFD49CCFFDFFFDA9FFB1FE54FF22
-:10081000F83E5FDD9FFAEB2B3DA4E79AFDAA0F8E11
-:10082000D66E1EDF831F4EF269ABE4D3C08F91F703
-:1008300056013F43FE9C56D1F9975F727BD3EBF490
-:1008400090BFE10E1C2F53F06B335F06BDB36EFCFF
-:10085000D7E1978CE16FF857F90D8788BCD20BDD93
-:10086000B71F32CE23FCAED1EFDDD70BFBBE1EC6C9
-:10087000C07B7A5BEFB4071B60C1FF1CCBCF674422
-:10088000CD75D72091FDEE267B42B807BB49FE3DD2
-:1008900088E655FE174EE4EAF7C7A2CAADAEFD9949
-:1008A000F464BDDDE4B904BBE9FF8E37EAC9D61AAA
-:1008B0006EE75A41DE515C5F2B0E21BFCE0C286DD6
-:1008C000981AEC4FAD55500EA6D5F8281FFE52E3EE
-:1008D000FA663C8A15E7FFBAE3FAE6BC817F9738EF
-:1008E000FFB1F1D1E3FCD2FF6A8ECB8FB037979284
-:1008F0007CADB4E05FB2600DBB3FD87E0F9EF73C8D
-:1009000007DDD330E703C48ADB8F48B1879D0363DB
-:10091000C7EFA5BFE0115BED1B68873FB2DA42E786
-:100920006BCE1B1896C8F3C75BC7AF7A98F27FA44B
-:100930003E5C21F84C9D6247FCF7570489CFF8B51F
-:100940009DAB319E9CE6626DA867B58FE7F4A2A6C9
-:100950006BC467AC157EC22B199FA8CAE6F7E6E206
-:10096000057EA9836BDFC2F1930FA85E8C6FDF8BCE
-:100970005D816724A2AC443D628C85F2225A945A70
-:10098000F27B342B1EFA3B1EC9C3DCA41F3D9DEC39
-:10099000FDC35CCA0FE57F6F64DFB4EFA6E3FAEE38
-:1009A0005EBD3A1DF5C08C093C1F71D3B453950848
-:1009B000675B1EE87F0A9586BF4B2BCB8F26F038EE
-:1009C00009F005CA4784756FA1F8FB603BF9D9545B
-:1009D000ED81EF201F502F9B4278DDACB8E72DC092
-:1009E000F3CAB5931ED3903B6AEE22D8D7BA3EFE27
-:1009F000A61C3CD7E4C1B4CF86E4BE49A88FAECBD9
-:100A00001A48FA6793524BED812C0BBDA78AF8FC6C
-:100A1000BADCEFBEBE18FD59D9FCFE674BEEA9D774
-:100A2000B15FCB18FEC76CCCEB55DDC67B52F8E14D
-:100A300023E4DF6A7F0BDD2F54455C5C35C59537B9
-:100A4000C87D8AFB2BF1826F55E5AE994BDF4F488D
-:100A5000B5BB11C91A13C3E5586FBCD3C6304EC716
-:100A6000ACCD063DAD7E95310E617519D7D3D475E9
-:100A70003FE1D5F9C8671A15510FFC82D7B19D9295
-:100A8000FEDAE623BE34C6F3FA35BF79723EC511ED
-:100A9000C5FA6C727D7DF8DF5BF97430A3FB6D5590
-:100AA000B670D4EF0B5F685DDDC7DDA48971D9FF37
-:100AB000E6B84DB93C4E641E57F6339F9B6E1EA69A
-:100AC0005CD23CA7CA09FF0EAB0CF98C793EF3FB54
-:100AD000F2BDAA3EB349DEFDABFAC782EBF2095D77
-:100AE0007FDF8575C52DC43D3B8F2E3E563F651477
-:100AF000DD8B6D556A896E02C996A8F9BFB1E947C9
-:100B0000373E0F8E10BFB5728833B52E9EF2382453
-:100B10003DC93C0F6BBA859E33311EF0E157491F2A
-:100B2000D2BACE8BB9FB46C6552BECD4DF7C8FD81E
-:100B30004CA7323F84DECB89B45BC5BCE6FC109782
-:100B4000C6BFB7D25AF900F9F32F354FE438D22790
-:100B5000C18D915DD8F05FCD942FC5DAF9F3867C15
-:100B6000377DE770BDEC97C828BF499E83539C032F
-:100B7000137691CCBB89969783F65CBA84B9870DBE
-:100B8000C67D36CAF73D3E0DF9E53D578CC8C7EF27
-:100B9000773EB873D313680F6DD9B5E67D2CE38724
-:100BA0008DA0EFA726782D5EBC9FE5BAB1BD1D399B
-:100BB000E4DA618B9BE938F5E74AF75315CD0DFD73
-:100BC0001D2ED776E4BFCCA1D077AFD41FA605D118
-:100BD0006E4D5F64C48356C5DB17FF3E6660A3425B
-:100BE0007A177E6F40DF6EF718EBC7262842BF34B6
-:100BF000DA31CD31EE750DD5B8DEAA9AEEB56EB20A
-:100C000079E8FBB99BD6A9A40F6C1271A5F1DADDC6
-:100C1000F357036DDFDEC8FF9E706B893D88F75385
-:100C20005B13DDD7CDC5BA907F32BEDDFC8DCB82A4
-:100C3000FABFFB9439C14378B8B1A46F06E371F0F1
-:100C40000CDFF0D878F165CBFF0132DEFE59008071
-:100C5000000000001F8B080000000000000BC55BB7
-:100C60000F701CE5757F7BBBB777924EA7BDD3C9CC
-:100C70009C8C6C56B6146490E5B56C9953B0A3BDCA
-:100C8000D3BF9371E9C5FC3333B67BC6C6214D266D
-:100C9000114E494C42AA333A59F21F84AC24953381
-:100CA0006D9AB30999CC8401259DB6860073024ADA
-:100CB000288144492990690684096E483313A7C1E5
-:100CC00089D2A1A5EFBD6F5777BB3A59B6E34ECF96
-:100CD000237FF7ED7E7FDFBFEFF7DEFB6E8DDAFF60
-:100CE00072DB7A007855361ED6B104154C3FF0E71A
-:100CF0000319FFD3F06F09007D857A2AC57B052093
-:100D0000FF810470F57115F2767BFCFB6E4718A02D
-:100D10008D6A63905A8DC5E48D1ED800E0B7DA5C09
-:100D2000234FB6AEA0F95E93E1617ED20FA94AECE3
-:100D30004B9F8E42393480135C2DFA284B6855F84E
-:100D400059017030B2F54734BCBBBD5DAAB969B377
-:100D5000BE85E681FEC966805551E7FAEC76A73A72
-:100D600070F13500BE1CE4BD412AF326B450396D44
-:100D70004A589EDBFE196DB3BEF03C3E281AB79E62
-:100D8000C603DEB75C4C3F7CEE853413EFFE8A96DB
-:100D9000DB01F73D74830AB25482CE8BD455253FD4
-:100DA00025E13AC7EFBDFA468800640EC9D088E352
-:100DB00078A345EDF02FF5D47A9809887564F87911
-:100DC000D2243E053BBCBC5FFAF89730FF0088DFB9
-:100DD000FA8177641CEF4B49553F8CEBFD526AEF6B
-:100DE000576EC17AF625D990F83DFE87FCBBC79AAD
-:100DF00003C626581EAAFCA2FFFE53F7BDF922F136
-:100E000028A9BE457403AD882E2BB830FD1B0AF30C
-:100E10003D183B3DB212E9901D293DFE1DD5FAA7B4
-:100E2000885E369D171AD77E2FEF9F9AEC5A57A8E7
-:100E30008F94A77798C887D180014074D8FF1CBFD2
-:100E400087F52897B50BF31329CAF47993BE62BBD3
-:100E5000AF759A7B4CACCBA770E96B00DEAED46F5C
-:100E6000DC8AAFBA236FED20FAEF097834E2A3DD14
-:100E70007FF0A817F2012204CE8B72B70566766C5C
-:100E8000C576D0E0653997236BF9F9EECA94E2C1D3
-:100E9000F2F3E60A9617BB7F1F7C59D987CFD77824
-:100EA000B557494EB211895684CF9180B8F4CD0A16
-:100EB00098412C7BF5B8BF1EC74D3E491301748481
-:100EC000C623E0016879E2785DBA99B6614E3721B0
-:100ED0007F4216BBAEF54DA73A71BCC19765E37E64
-:100EE000AC87027BB700CA91F4182E969E8720E744
-:100EF00043BE2B819E77E9F9A6B3005D45F2D4315C
-:100F0000EB87AEA6423D8E2317D73BFDB58EF6DDAF
-:100F10005ABDE3BD0CA691473AF5465739DA55B6A6
-:100F2000ADD768BD7DFA5AC7F31B9ADA1DFDA14BF8
-:100F3000393D83F58DF88FF82E83A8F37B5C77A07D
-:100F400019EB45FD1528AAE3FBBF352B2367AEC57A
-:100F5000CA75701DE911F2E5E411B23FDBFC06F140
-:100F600065D00BA7A42A20D5CF402B11DBD4234872
-:100F70003FC992D757CC7A960B29F0FC1F580E9F89
-:100F80009CF148C4D727A0F53036FA1B4D9FF2607C
-:100F9000932B6948EC1F4541D7914F0D385E592B73
-:100FA0003F3757623D0A52A60FEBCBB05D54882203
-:100FB000BC40EDFC70E00BA21D2CA3761A64EAB0D5
-:100FC000AE19504E7CADC3713E19E67E993EABDF43
-:100FD00055A25FA62A2CC66FA179D15C76637902EF
-:100FE0000CF0C9448714C04AB222FD5C5E45ABC216
-:100FF000E70F81D14AF5469861BB84EC97A87E053E
-:101000004C6AC2C8E785DD9E514267FCC2EE97D2AA
-:101010009782DE2870C6E607CDDB61FE80F4EFD64E
-:10102000DBDBAAD28185FB29FB9F75E8AD1AD79936
-:10103000CECAFE5ED61365FFF3FCFEEA78EA551AC7
-:101040008F48EF6F9D4FEF16350F64BFB27130328E
-:101050003844F6F1CDD15DC8DFCCE37EA3112E1F5D
-:101060003F2E960F39D0CA89AE72FFA5F2013FB864
-:10107000AFC029FF89C32C8C269F937F045FFEE7B6
-:1010800052F8E2E607DC570DD0BEB81DFD6B295FB4
-:1010900026AD647A98D1D602FDB19E5965D12B6CEC
-:1010A000F14316655EB69E2BE185F942E355870B49
-:1010B000FC598C2FD114BE6F2DF047EE379978F67E
-:1010C000B9EC83B312952B2483F9B5524E79A85EFF
-:1010D00021E52DD093633B1D048DF9B314FAB98C2F
-:1010E000786776117FB2FB71229447781F4F59C2FF
-:1010F00049D6B9980D24FCF5645F9B14C383F5E6CB
-:101100004A4F2A8774BC52813CEDAF56810CD9738B
-:1011100044063C7EF6713CADF09CC9E231EDA17E07
-:10112000F7FA7359A9307F8B65B77F54F94D6DA6D7
-:10113000B940E7D364BFD6087A78D8FE4CE6A97FD9
-:101140003409C6A03EDF9E61BB8C6CD9292A77D2B8
-:101150008B76A65B26887569E4FB7F209C41E3299A
-:1011600058AF88A77BE3354C770884D92ECD5478C7
-:10117000A0142E300957ECB2E6D9F6117D790AD7C2
-:10118000B96BC4F7168D07599F1317B8FBEB1214F0
-:10119000F7B7FBCDC995BBFF25EA01ECAFB9201C21
-:1011A000107F6C6315D179419C497A525DDC4FF018
-:1011B000498DA41977A8A42FD58B8FE375E1177BF0
-:1011C0001C2F0A2E8DE3B5F08B7D4EED85B35E6549
-:1011D000A5B54EA4D76EB03F11A6E74E8B7E7F46D5
-:1011E000E75590E8A9AB44A43D9052496E3F861064
-:1011F0009A70FC8A437B828C17A04B23FA48F9EB48
-:10120000E50FAEBD083A5A74DA997FD7AB935DDA31
-:101210005F096FDBEF5714DEFF76FB4D8CDBD101EE
-:101220006820FE5658EBAB38F5FE0019F5FB2BFE97
-:10123000F2E50E5CFAD0BFC8865C4FEF11CFE23802
-:101240006520CEEF0AD2535C77C59367FE9BDADB4D
-:10125000EFC17A4F2343D1B89E8AA38C672B82AA11
-:10126000CE38DB2567368E86F7050E0E58D42B1A3E
-:101270005722BC6CFB3D3CAE347FDED5163EC757D3
-:10128000F10F2E00CFBB713ACCE173F13E105085C7
-:101290009E1888738BE9B8809ED9EBB6FBD5A8A9B8
-:1012A0007AA3B9447F8B0FCD685708EF5D5107B91A
-:1012B00003B8DE91917DF10AAC1FAB01DD87AF86EB
-:1012C0007B3E2B11DE4844842885620217D21434F9
-:1012D000BFD79A2FF40BFD7013BEDF5B173070651C
-:1012E00070C5AF4C2D8EE3DC59E7374C7C9005F18F
-:1012F0003E13F3087F3203AF101EDD63F1C7FBA47A
-:10130000C099CC1BD4C399B8C0577B4E7D720BF1EA
-:1013100077347CB391C7767BD03E55131E1BF332D6
-:101320009E435CE7C0FDBE58110EC4BF3B8F7B1DC2
-:1013300075AF0B27BE19471C48CCB470E02FE320D3
-:10134000E6C582CE93CB350F04226C4F572BD31EAC
-:10135000ADC4396BF3C3C6DF4FD5083A7BDF1374D6
-:101360004187791F3DF7BD27FC3134E081B62574F4
-:10137000FA0BFAF9DA903EF4F43D711E604F5EB755
-:1013800089FF68DD6E3CEC73E161F77A6D3EC80958
-:101390000B276F800D441FC4E78C13ECFDB8F7F1E9
-:1013A00024FAE75D28144F0FF8B9CC0F685C3E3380
-:1013B00010E5F2B9011DBA10803D3FD0C4E50B0322
-:1013C000063F7F7120C6A54D87F9F44129C4FD5E13
-:1013D00065AD59699E4ED139BAB4CBC3AA70EC3E03
-:1013E0000FD3ED1CCA27295F10BD2005977855D271
-:1013F0009333692F96FF738525AFD7FACE4EF9B098
-:10140000FD682D18F763FF2B627B59CE369DF514CE
-:10141000F404C8CF2977C409E250EDA877FAAF7475
-:10142000B4EFD6563ADE87E3336CA77AA3D73ADA1D
-:10143000D97CFE3AF959B8BE635DA735A26B9FBE51
-:10144000CED14EB90FF9DF42FECFF58E7141DE628B
-:10145000909D0E6F77CA61D0C557F5AEF3FB41364C
-:101460009FCD84530F16E2AF5B5E6DBA86E7E82A24
-:10147000FCCA2CF99548D7B026E86AEF77D4DAAFE2
-:101480003DAF1213FBBBDCFE6590FCCBFA52FEE5D0
-:10149000CF2D3A2FE25F269DFEA59BAE8BF9977F5D
-:1014A0009E70FA97174ACF9DCB45DC2DFC92CC7EDF
-:1014B0008B9CECE773B07A5A367AC9245AB8AC924E
-:1014C0006C00B6DBD9A6E608671E8399289DE70F56
-:1014D0004A485594B7EA66A396ECCCA321E3D56DB0
-:1014E000841BFB3CC649ECF26CFCD628E18EA103C0
-:1014F00027A27858C103090FCF3B163FC3F10B4514
-:10150000078E5F6069E64AE013BBFD3D435E3E0F18
-:101510001EDCA1E6246CFF60A576EB36AA5BF32007
-:10152000414C7A3FD1F6A11CF929A309DD8A336524
-:10153000A2E4AF7C69C7865A3EAC14ACAFA6E606FF
-:10154000EBC9E1322D487E74768747A37DC9EBFF56
-:10155000EA33241F0F48FD871AC87FABF1009D1F97
-:10156000D9D086DA5DD84EDE893086EA3B36BC4E6D
-:10157000367BA2463FD440FD430D4CBFA18DB7FA48
-:10158000699ED1D0923E8A8F8C767B984732E18CCF
-:10159000208FD3743EBF47D68ACE77E0B805AF53CD
-:1015A0008E78F22A9D57843F82F3E37B87432A3962
-:1015B00005F08F895B4E641AF831DBAF2B2C3F604E
-:1015C000E78E84C9F68AF004D267A777A6A6D4B9B5
-:1015D00070D08A77CE9D3B51E77A4ACCC3B8401190
-:1015E00033F247B7E3B4F8C9DED893A373741C523F
-:1015F00049B29F998087E31D0BED5F0938E7B3C7B8
-:10160000E7F1648AA395996545FBD7ACF8EFCB0960
-:1016100089F1EA0F89EF6D62199125857529490FC6
-:10162000F7B3FD5794DB6D93240F16BDD1AF78BE91
-:10163000F8BC7D2D21E2B2AFCFC911365D52B48E18
-:101640008DAA359EC1718A35AEF8B59B3F171BBF79
-:10165000FEA5B59FD7B6DF745E3F7955CED9CFD7FB
-:101660000962FF56BCDB6BF1FF1A79721FC9E3FFF9
-:1016700077BCDBD77979E3DD6F937D229C8776FE9B
-:1016800061FC9EFD698EF5054E9D7D9BF57AD51218
-:101690000BBF40B4C1C68F2BA874E90F017DE4DFF6
-:1016A000F85AC4A5581FB7EA99D5625C28D6CB155D
-:1016B000E4178838CAB2CE95C2DF227B42CC558C63
-:1016C000E544D780F29D8C86FB280F1C831096BEC4
-:1016D000C8AE0C951DCBF5D118AE6B7C9587CFAB02
-:1016E000F1CAF489215AFFAA4049BD68EE14F66F89
-:1016F00084E495FD24303DA46F92AD1C90F6209FAC
-:101700002640F0D9EC0CF17A146D2C7607CA4DCC3A
-:101710009207DC0FF7778FFF611ABFCD31FE374894
-:101720004EB3D6E034CE2E1C27DE29D97A95A1F708
-:101730007E6B3EBF3E16235C90E8D4C47B65AD4112
-:10174000FA301E2A3D5FC29A0F2814B3A1808FAED3
-:10175000D82EC601BFE8FFA07476DBE9F5CC57D6DA
-:10176000275A07BDAF309CF6C13D7E5993D3BF5178
-:10177000EB9CED5373FB70FA450F48A5D77BB7D5AB
-:10178000BE63B99033928FFB4BC8875BDF558A7B72
-:10179000E2B869E207DB0F617702CA7482FC9D4000
-:1017A0003318834CE029DE6FEAA9865333EBC9CEA8
-:1017B000070DF283143F9ACAD6829FE8DEF7627E55
-:1017C0009EA240C6DB3ADFDFC371CDAA5671CE645C
-:1017D0008AC6FB8C252772B13F584FEE887E23EDD9
-:1017E00073EC90CCF1A5B17B7DDB4A9DD3F726CE7F
-:1017F0009FD7399E423F829CD4C78E1EDA8DF5DF7B
-:101800006A1ECDC76DF492791DCDAACFE57552172A
-:1018100096D719EB0AF7355C4C5E678171E7CEE32A
-:10182000F9799DE39D48A76301915F99CBEBDC1C9F
-:10183000B9A0780E58E772D8B2CB957D961FB15FEC
-:10184000623FE299B67F3FB286E4ACCDCB720047EF
-:1018500027A0584FB66CD7BF5A4DE7CCEB3E681463
-:1018600076CDA4F16CBFD8A69F6A8D9FF8F64B0A7F
-:10187000B51FAFF56CE0F120EFF344793DAA55CAEE
-:1018800054AE51F372158D1B06439C0F79899EC788
-:101890009158C5FEC1E8EC4F3AAB284E1200834C7C
-:1018A000D0685C3B50455F280B4478A75ECF91BD64
-:1018B000EDF45738ECFF689F2AEC6B23FA4BA43FFA
-:1018C00053FA57F760FBE1FD658C9B1EA8F308FDFA
-:1018D000CA4839A99EF0B5D3EF199F5C21F0D851C1
-:1018E000AFD188ED1F9914ED77C737E464C6DD4E9C
-:1018F000BFA84F77FA45BB6B5B5F25BC08435E8E84
-:10190000C76B16AEBDA1C9E92755D6F7BF403865EC
-:10191000E790C0C307A3E125BBD1FEADEDD21D7991
-:10192000B25D437772DE684805CEA78EEE50593F10
-:1019300046BD6F1DDFCDB8B19CE938B143AD4D1741
-:10194000E9CBC7BA7C3CCEC40E813F105EA6274BC4
-:10195000BCFF589765A714E073DC96973FF9B8A0D1
-:1019600073B00E723AE1B8BE7D79F22BC7EB704FBF
-:10197000F87E28DAD03745F3BF2203EDD32D87F761
-:1019800090135CB40F5FCCE3A093D797EAA7F1E183
-:1019900006D0C9AE7525B14E7180ED2A507CC017B6
-:1019A000FD0BDE6F18EB6558F727C7320AD6FD0D21
-:1019B000E975848B9FBDF7B6917884CE3BA1DFBEDD
-:1019C000ED7B533751FBF55E28A3F5812E45697DEC
-:1019D0001909449EDFA90F07B3FFD4457C3A684834
-:1019E000CCA29D7D5BEFA2F59C8B94336E1AF3A67F
-:1019F00076B13DBAC5AF65F80C9C613FC2FB051FCF
-:101A000090DC4DDCFB4E0DE1EFABBA56B0BE95E974
-:101A10004EFFDA0F637C6E6F34A7B753BF8D3195DD
-:101A2000321EF04CFB19E6DB449BCFF0E13A26DA9C
-:101A300025A6F3EFDABC399AE769755AA6799FFEB5
-:101A40001DCE5D5F4ABF4BEB95AD47EEF6A3B1AD42
-:101A50007E928B83307D33D127332BE254EE76DFB9
-:101A6000B0E4E060F6962685E3592AE7DB95B38675
-:101A70005985A3876653DFA2D8EB2B9D0AB7BBA776
-:101A8000D6939170BCE13E95F568B8323D42F23C88
-:101A90008C72CF7E5204EBA467B511E370D17CE366
-:101AA000EDB736913D7BB9AD8CF1FD6BCFD6DE91B4
-:101AB000C12113F2AFFEEE31F2ABEA54E6E7B0B764
-:101AC000FF75F283326D65BCDEE796A9E0277B10D7
-:101AD000B9E321F2B3E191ED502CAF1349A1A71363
-:101AE0007542EFA5C7B6B31F302EC94C67B3E6A445
-:101AF0004478CC97B4E34E22CE14B7CCD9C4F6EFD9
-:101B0000721C6A699F88A3C69356BC490E64582EFE
-:101B1000AF2B7B88F4DF54BC0EFF78D359A7BFBC32
-:101B2000D4E52FBBE3515BBBAC78841577B2E532CB
-:101B300068B5998859767ABD2F27E4B0BF566B9E59
-:101B4000AFDF3FB4F0F3F4801F2502E027031AD77C
-:101B500083E66F0E54139F06A2FCFC4F379E908ABB
-:101B6000FB8DAEBFC5AFB33D9989D2B86E3BE2964F
-:101B70008B373ACB1DE789BDCECAF60410EE3D7710
-:101B8000962D326C0ACC74F2D908D38162BC9FA71F
-:101B900075FA284E26D6F91CADD3477132B1BE175F
-:101BA00006742E5F1C68E2F23B5D20F201B67DB840
-:101BB0000AED03D2A1AB4ED4C91E10FFC3913B382E
-:101BC0004EE68B2A1AE9BBBF6E2C2F15D98789CA1E
-:101BD000FE9FDE4976BF26C0F2E8DED7B1AE397C83
-:101BE000E8D8D7CEF67D6C77CEE13C447FB433772E
-:101BF000B11D42BBC0F36E576FE775986897D82E3A
-:101C0000F47FF536B60B5E203977DB817046E877D6
-:101C10005A17F13BFB9ED09C5DC0797238CF336878
-:101C2000D7A93E8C7680E6196E7FEB1334EFEFFE7A
-:101C3000500E34C4C48E57D92EBC7C0EA0FA32DAB2
-:101C4000055B0FD73DF71F27324A293E6FBDED9444
-:101C5000A0870682AEDB5225FCC48BE5339817863D
-:101C60006372CACCED22EFA8321D16CC3B663C064F
-:101C70008505062795A4957704CA3BDAF9C7A2BC67
-:101C800063B933EFA8E6B28C6F7256DEF1D6CD227F
-:101C9000EFA896CF040AEBB0F38D43F4A8B6909F5B
-:101CA000FF87AEF4CB5D6D853CA32E893CF8D571E2
-:101CB000F387F41C22613EFFDD794A3B1F89F04E19
-:101CC0004A17E5375BF0B93F5CC87FB9F399F6BDB9
-:101CD0008C1675E6E411A4CBE0ED7EC60FF6FA068D
-:101CE0001FFFF0EBE948E13E809DEFB4F39976DE0B
-:101CF00013D7FD4EF1BAE14960BB034FF84FD0F95D
-:101D0000E65E6F453CFD4B6A3F6FDD17985FDC0276
-:101D1000D6F888BB489FDFB4E838D7BE4BF89F6B36
-:101D20005411DF86A0CAFE4EE2DB0190096757AA74
-:101D300027492F76C14C37D1773024705EF6012FBA
-:101D4000DB49E8D6997F35AAC9F7216A3E5F661C50
-:101D5000C0C7D9292D48F1A7AF759AD0DD46EB1839
-:101D6000BB792BAD03713BD9BB371ABF12E17C3F66
-:101D7000DD7BAA22FFCF584E7110BDBBF47DA58E2E
-:101D8000E567B7F2BC951E20FF2C5B66BCA013BDB7
-:101D90009F5278BC3E1CC26CE5FB4B5D6A98C61135
-:101DA0007EF260E034F3ABA3D1B796E37A95A5FD5C
-:101DB000C0A5DD820E9B712C15C7792A9EAEA57534
-:101DC00053AC34CA722CFC3BBD1B6CFB759F674344
-:101DD000210E5621A7F56EB2D78F480A9D8F3E4B34
-:101DE0006E6C3FB13B61D6770B7E9834BF7D0FC8D8
-:101DF0009EFFEA6E61175FE9323F44EDDA681E929A
-:101E00004B2D13273D6C49A33C48AC3FAE3CBC90E6
-:101E10000BB7BCDAF2369787B7E450D244BE16E56A
-:101E2000AA8DF6074FEB531E89F2EDE91347A8EF91
-:101E300025E6BB3F9D3037D1BA77C7531D54BE71DD
-:101E4000EF6DC0799D0BBCC7D1B1BC3F4A79FCE1B5
-:101E500032819B1F8D1B0E7B77B7459FBBBB055EF9
-:101E6000BA1665669AF44031AA80F5F82EC6D1B646
-:101E70007D1A1B487FEFE78D85FED90198A47CD0A1
-:101E800042EBF01EDAC771DDC1BA849FEC0FDAB7FE
-:101E90002AAA0FD799D1E275642B859C679689B8D9
-:101EA00005C5D332BEC2FBBDDD32EFA7B30EF224AF
-:101EB0003BBE80C8BBF95071753C7F7C662CCFB8A7
-:101EC0002600931462F814E90FDDFF8B186092BFAF
-:101ED000599702D26F9F56E84F79D4CEBA7EBE6F23
-:101EE000B9D03872D4EE9FE6FEE3DD1A8FAB463CE4
-:101EF0008E38C0627473D36588E8D6B830DDD40BF1
-:101F0000A69BD03B37BD0E13BD909FCF863ECBFB2B
-:101F100083F73B59CF7C1AEE13CB31CBBEC80113EC
-:101F2000D29564A352882029CEDE0F9487B6E92C7F
-:101F30006B82CEB2D6CFFD7C7506A457135DD24C12
-:101F400017371DD04E00D9897F7EFC7884F0690751
-:101F5000D6A3C27E800FCB5F5BFEA0ADA75BE0C7C0
-:101F60000111FF769E17F3ECA9553E6AC59FDDCFA0
-:101F70006FE92913B84E0707DD2B2BB7323F4E8E82
-:101F8000B4323EC0F33343F7627A6A1BCBA97EB901
-:101F9000F388EEFCA13B4FE8CE0F16E4C6F4D33A2B
-:101FA0007FAB9DCE7CB484BCD8E5114BDF8606FCAC
-:101FB00025F5EE08EA3BF16FB8DDCC50DEE860684D
-:101FC00026CA7233F52EE362E525D9207CA9288242
-:101FD000CF3DCB66988FBD311328DF746460DB770B
-:101FE0008AC7FD753CFD23B26715DAA449E30420D6
-:101FF0009FA1F36773B5D95F0A37FD9B6547BA1395
-:10200000A97F257BD5A10BFEC7E2E6AB6C172FD0CD
-:102010006E2DA44F8A4DBB8BD6A7D3429F62FB582F
-:102020009F46EBFA19678DFE58262455C091963EBF
-:102030008DB69F617DB7F5EA3D4B9F3A63422F28ED
-:102040008E40E777B0CE64BBF15F963E29A827A407
-:102050004F3E4B9F825AA13DC5C73B89CEF85CA934
-:102060009BE17EC198A57FA44F01BA3F0C8C0386EB
-:1020700051EF282EE2D6AF8E06716E6A89B4A7871B
-:10208000F0C5B2AD1C971FAEFBCF6AC62F96FC17EA
-:10209000F06E2B9FE7E7463C06E9430B01E8D6824A
-:1020A0001ED8FBDE382B431E59B36956E2F223B328
-:1020B000155C76CC967169CE5673199F0D719998FF
-:1020C000BD92CBCED95A2EBB66510FD621DF67EB1E
-:1020D000B9EC99BD96CBDED9555C2667D771BBBEEE
-:1020E000D9B55C6E9EBD9ECB1B66DBC53C4D625F69
-:1020F00025F481D26097411F8C0C54921E7CFC7594
-:10210000B6EF9ACA7794B2A10D9C27F22933AC0F8F
-:102110002763C2DEF706049FDCFAD09D48AF25BADC
-:10212000BBF5610EDF2AA011FD55B03E2EFC80F8F4
-:10213000A7BDA7E83EB21A3559CE109F7CB887F4E8
-:10214000E31271C21CCE5CAE321EB571E6E832C439
-:1021500099F5059C39DC2EFCB2EC033EF6DF764B9C
-:10216000E27ED9A713E91B7BD82F1671A2F4CD7E8E
-:102170008D707336D4130D505CEFA00C142F401CDF
-:1021800092E2764A4ADC67BD407D8EC5857ED8EDF9
-:102190005BE0B4A7FF2270CC1BF4B57D61BB10BE21
-:1021A000D473D6DB29EC8226EC42B6AE7F84F3D220
-:1021B0002EBB609FB3480F875DF85C8F854B2C3D2D
-:1021C0000FD789F3324C7601E9F3C51EDB2E38CFE9
-:1021D00059C5C621491B8758762129FA216E779C5B
-:1021E000B3C86E3F14E16294A3C19EB6F9F681CFE5
-:1021F000F3A2736EB0A1314EBF25089D8538896763
-:102200007056DF6C943877B25A2BEBC194D209C563
-:10221000F1958BD6B3907DEE987CEEB8DBD9FA368B
-:102220003CD527F6699D4353B87FB348DF7A3571B3
-:102230001EE1F9F3F59E12E74FC772339D2AB1CE26
-:10224000477B84BFF1834D16EE455C690418DF9728
-:10225000C40D8FF608BB4EBFD37802ED4F77329393
-:102260005574D6F34749CE37764DCB1446F8486CB3
-:10227000EC154A89A09E3EF6C7E8E9D1B895EFDB98
-:102280005F2D2E3B5BE562F26FE3225B0FE6EDA371
-:10229000DEDC568A1E4B7B05BE1F1CF1F4D1853F48
-:1022A0005B2EA694958C7F4AD85BD3B82CF6F6C2E9
-:1022B000F0C7149E83C4F7F3E08F374BD9DB85F06A
-:1022C000C7991E912747FCF10EF5EB6816F8636974
-:1022D0002FFCDFE08AF869A6DBA5E28A0F6CFBB170
-:1022E00000AEF0F6EAE27715DA0CDB8FE025E20AC1
-:1022F000B79D40FC50DE4BF431C4B96BFFDE842F38
-:1023000050169D5F6867AA7A055ECFD3E5B19381C9
-:102310004446623D4885E8F998B982E5E872E903E8
-:10232000E2C42B7B8BEA8BE9C505B79BDCC171400E
-:102330003B9FF9FBB2600BC547F6FB45F9B9F2E0EC
-:10234000492AC707441C7A94E27E588E7B81F307A2
-:102350004352B97152A27ECB7322DEDEBF86E29E6B
-:10236000D7F786AD7872FF75FCBB1BF8A2236FBA56
-:10237000F0BAC43D5F1AEA03BE0F5EA7711CDDA26E
-:102380004B981880F31E5EE5671C78B8EF91E377F1
-:10239000505CA64FC4C140D1EB3F4AE72FC29A58C8
-:1023A000D1B920837286E2F32374B79D41C7367199
-:1023B0000FDA5A4F7512FDF722FFA32A76D7F77E60
-:1023C000EEBC37E429CE231F31B75689CBCA77F14B
-:1023D00038B69E1C094CFAB5227B7374C079FFC9CC
-:1023E0005DCA6DAFF07DC3634D0AE72F1E581F29EC
-:1023F000233D39D42082B4E58D9E54AE843E0FF443
-:102400004A8EB876C83AE7CBBAC5BA169A6F784002
-:10241000C46FEDBA4F4F9924A7E5F56329A26B79F4
-:102420006344A2F8ABFDFEF65E61370E4B46BE0379
-:102430008979B8529C17BEBA0C78080F84F6AE237F
-:102440001AFBEBFAE14C80EE6F64E06D2CC3613552
-:102450005D6ADD83D6BA0F7B7329C2538757299CE7
-:10246000E7444C55324EF609CB4E97378EF3FAA01F
-:1024700051E17C95BBDD0EBB9D3AC6F98E438DDFE5
-:10248000D4695F87E807374B914BC9871F3A40767D
-:102490006600F9EA25794E73597ECDB798FEA32DD3
-:1024A0008A46FBE8969B0FD03CC79260105E71CBCA
-:1024B000C531D0CA687CB77C54AC7E8FE34FE54110
-:1024C000CA8C901CCEF8851D157216B0F8336A8838
-:1024D000BCCF684AE4AF6CFE15DE8BFB06E7520A00
-:1024E000FB2576FE6A0940491C67EBE590158F9F36
-:1024F000F77E799ECF9DA39BF251BA2711D4FC465B
-:1025000092C67DC4B9AE837876F2BAFA44FE62CE42
-:102510003EAF15FEE1FC758AF881F2CCBBC2AE5A23
-:102520007E42B0F93DB6ABF6BDAFDE8D425FABACDF
-:102530007BF755919429E872B7C31E48D7FC224314
-:1025400079A6076BC5DD84F04671AFB65C05234FF5
-:10255000F700FA027CBF6949CCCAD76D13F72BECA0
-:10256000FBE16A4475C41322505427DCE9AA83BCFA
-:10257000FDBCF7E0F6FFECC48BCF15F1FDA55EE7DF
-:102580003DF2C5FAFF7E20F7E27368908E19E7D717
-:10259000479B6F5F1E887169CBA52DA761DA62EB3F
-:1025A000C2FDC743A992799A6052E8C362762DE2D0
-:1025B00033DBDF41BE7BAB81F3675FD9E41CEF37D0
-:1025C00096BEFEC6D22F7539D4129E1A0B093B3027
-:1025D0005606DBBE5B426F972455B61B057D70E245
-:1025E0000A5B8EE6D363115CB1BA4BE00A2D5C4600
-:1025F000B8E898917881F281EF69AA5E2CB7EEB8BD
-:10260000BB8D2BD2493BFEA74A840BB4C00CE3ED33
-:10261000395C60E108372E28F7E6B6917E94AF5218
-:102620006D7BC576E5F3DFFFFB8732BCBF8C547C46
-:102630008E8EE66FE771C3AEB83B449CBF63798B67
-:10264000F017AE27AC4F4E2728FFB84511BF6F1BC0
-:1026500033A1F81ECEB8E7FDD83BD6F7F76D1C5274
-:102660004FEF8F4EF3EF6BE01E289EFFE04D3BF9DE
-:10267000F7148BF1DF5E17DDEB2AD69F8BD50F2386
-:1026800069E9471994917E9C83FB380F0F6349C712
-:10269000F9C41989256C12C407B7A96CB0A082547B
-:1026A000D01BE8B5F2E3E9393BA9503FC3EA564BEA
-:1026B000B72C64CA37E4F9778BB6BD39073FE379A5
-:1026C00033CF48D21CEEBA12DD7FFA3DE44A5A827B
-:1026D000E6A1D2BDFE1560F0F3064871F921E8E7E6
-:1026E000B209C6B8BC0626B96C86692E5BE02C9789
-:1026F0006B419769927560CAC05737D35CBF0E3281
-:102700005CB643BA9DEE970FD5EC5D4BE7D12D2E0D
-:102710003AD9742EA1F78C2B6D7AD8742F27E35DEC
-:10272000B3385FB321618F3B6379F61F0201819B50
-:102730006D7FDB1E67211C7CB9F09A8D33FF17CFAC
-:10274000A588169043000000000000000000000073
-:102750000000001800000000000000000000004021
-:102760000000000000000000000000280000000041
-:102770000000000000000010000000000000000049
-:102780000000002000000000000000000000001019
-:102790000000000000000000000000080000000031
-:1027A0000000000000000000000000000000000029
-:1027B0000000000000000000000000000000000019
-:1027C0000000000000000000000000000000000009
-:1027D00000000000000000000000000000000000F9
-:1027E00000000000000000000000000000000000E9
-:1027F00000000000000000000000000000000000D9
-:1028000000000000000000000000000000000000C8
-:1028100000000000000000000000000000000000B8
-:1028200000000000000000000000000000000000A8
-:102830000000000000000000000000000000000098
-:102840000000000000000000000000000000000088
-:102850000000000000000000000000000000000078
-:102860000000000000000000000000000000000068
-:102870000000000000000000000000000000000058
-:102880000000000000000000000000000000000048
-:102890000000000000000000000000000000000038
-:1028A0000000000000000000000000000000000028
-:1028B0000000000000000000000090000010000078
-:1028C0000000000800009008001000000000000256
-:1028D00000009000001000000000001000009DA803
-:1028E00000000000000000080000000000000000E0
-:1028F00000000000000000000000000000000000D8
-:10290000000000000000000000000000000091A096
-:102910000000000000000008000093C00001000457
-:1029200000000001000093C8000000000000000249
-:10293000000093D00000000000000008000093D4C5
-:102940000000000000000002000094980000000059
-:1029500000000008000093D80008000000000008F4
-:1029600000009B3800400000000000400000941868
-:102970000008000000000008000094580008000053
-:1029800000000008000094A800C8000000000098A3
-:10299000000096380098000000000028000096789B
-:1029A00000980000000000280000C0000540003032
-:1029B000000005400000CB200008000000000001DE
-:1029C0000000CB21000800000000000100002008EA
-:1029D00000100000000000100000200000000000B7
-:1029E0000000000800009D600008000000000002D8
-:1029F00000009DA000000000000000010000000099
-:102A000000000000000000000000000000000000C6
-:102A100000000000000000000000000000000000B6
-:102A200000000000000000000000000000000000A6
-:102A30000000000000000000000000000000000096
-:102A40000000000000000000000000000000000086
-:102A50000000000000000000000000000000000076
-:102A60000000000000000000000000000000000066
-:102A70000000000000000000000000000000000056
-:102A80000000000000000000000000000000000046
-:102A90000000000000000000000000000000000036
-:102AA0000000000000000000000000000000000026
-:102AB0000000000000000000000000000000000016
-:102AC0000000000000000000000000000000000006
-:102AD00000000000000000000000000000000000F6
-:102AE00000000000000000000000000000000000E6
-:102AF00000000000000000000000000000000000D6
-:102B000000000000000000000000000000000000C5
-:102B100000000000000000000000000000000000B5
-:102B200000000000000000000000000000000000A5
-:102B30000000000000000000000000000000000095
-:102B40000000000000000000000000000000000085
-:102B50000000000000000000000000000000000075
-:102B60000000000000000000000000000000000065
-:102B70000000000000000000000000000000000055
-:102B80000000000000000000000000000000000045
-:102B900000000000000012C800800000000000805B
-:102BA0000000000100000000000000000000A00084
-:102BB000071000000000071000001EC80000000001
-:102BC000000000080000AEC000080000000000087F
-:102BD0000000AE4000080000000000080000AE80C9
-:102BE000000800000000000800002008001000009D
-:102BF000000000100000200000000000000000089D
-:102C00000000A01007100040000000400000AF408E
-:102C100000080000000000010000AF4100080000B3
-:102C20000000000100001ED00000000000000001B4
-:102C300000001ED8000000000000000200001EDAA4
-:102C40000000000000000002000012B000080000B8
-:102C5000000000080000000000000000000000006C
-:102C60000000000000000000000000000000000064
-:102C70000000000000000000000000000000000054
-:102C80000000000000000000000000000000000044
-:102C90000000000000000000000000000000000034
-:102CA0000000000000000000000000000000000024
-:102CB0000000000000000000000000000000000014
-:102CC0000000000000000000000000000000000004
-:102CD00000000000000000000000000000000000F4
-:102CE00000000000000000000000000000000000E4
-:102CF00000000000000000000000000000000000D4
-:102D000000000000000000000000000000000000C3
-:102D100000000000000000000000000000000000B3
-:102D200000000000000000000000000000000000A3
-:102D30000000000000000000000000000000000093
-:102D40000000000000000000000000000000000083
-:102D50000000B00000180000000000180000B300E0
-:102D600000400000000000400000B30000400002EE
-:102D7000000000010000B30100400002000000005C
-:102D80000000800000400000000000400000000043
-:102D9000000000000000000000008000000800406B
-:102DA000000000040000800400080040000000044F
-:102DB0000000BB0000280000000000280000BC400C
-:102DC00000100000000000100000880000800000DB
-:102DD0000000008000008800000800800000000261
-:102DE00000008C00002000000000002000002008EF
-:102DF0000010000000000010000020000000000093
-:102E00000000000800001108000800000000000891
-:102E1000000011680008000000000008000011A870
-:102E20000008000000000008000012700008000008
-:102E30000000000100001271000800000000000105
-:102E400000008D00001000040000000400001320AA
-:102E50000030001800000010000013280030001897
-:102E60000000000200000000000000000000000060
-:102E7000000000000000000000000000000011E859
-:102E80000000000000000001000000000000000041
-:102E90000000000000000000000000000000000032
-:102EA0000000000000000000000000000000000022
-:102EB0000000000000000000000000000000000012
-:102EC0000000000000000000000000000000000002
-:102ED00000000000000000000000000000000000F2
-:102EE00000000000000000000000000000000000E2
-:102EF00000000000000000000000000000000000D2
-:102F000000000000000000000000000000000000C1
-:102F100000000000000000000000000000000000B1
-:102F20000000000000008308008000000000008016
-:102F30000000000100000000000000000000200868
-:102F40000010000000000010000020000000000041
-:102F50000000000800008D100008000000000008BC
-:102F600000008D7000080000000000080000845080
-:102F7000046000280000046000008EA0000800002B
-:102F80000000000100008EA1000800000000000108
-:102F900000008408000800000000000800008448C9
-:102FA000000000000000000100008DF40008000097
-:102FB0000000000200008DF6000800000000000282
-:102FC00000008E040010000000000004000000005B
-:102FD00000000000000000000000000000000000F1
-:102FE00000000000000000000000000000000000E1
-:102FF00000000000000000000000000000000000D1
-:1030000000000000000000000000000000000000C0
-:1030100000000000000000000000000000000000B0
-:1030200000000000000000000000000000000000A0
-:103030000000000000000000000000000000000090
-:103040000000000000000000000000000000000080
-:103050000000000000000000000000000000000070
-:103060000000000000000000000000000000000060
-:1030700000000000000030000040000000000008D8
-:1030800000003008004000000000002800003390DD
-:1030900001C0001000000008000032000020000005
-:1030A00000000020000037200000000000000008A1
-:1030B0000000102006200038000000080000A000DA
-:1030C000000000000000200000003EA900000000F9
-:1030D0000000000100003EC80000000000000002E7
-:1030E00000001C4000E00008000000080000000094
-:1030F0000000000000000000000040000008000088
-:103100000000000100004001000800000000000174
-:103110000000404000080004000000020000406081
-:103120000008000400000004000040000008000047
-:10313000000000040000400400080000000000043B
-:10314000000040400000000000000008000040486F
-:1031500000000000000000080000800000000000E7
-:1031600000000010000050400001000400000001B9
-:103170000000500000000000000000200000500887
-:1031800000100000000000040000500C00100000BF
-:1031900000000001000052C7000000000000000114
-:1031A000000052C6000000000000000100003000D6
-:1031B0000030001800000004000030040030001847
-:1031C0000000000400003008003000180000000279
-:1031D0000000300A00300018000000020000300C2F
-:1031E00000300018000000010000300D0030001811
-:1031F000000000010000300E003000180000000147
-:1032000000003010003000180000000400003014EE
-:103210000030001800000004000050000100008091
-:1032200000080004000050040100008000080004B1
-:103230000000000A000000000000000000005068CC
-:1032400001000080000000010000506901000080C2
-:10325000000000010000506C01000080000000022E
-:103260000000506E0100008000000002000050705D
-:103270000100008000000004000050740100008084
-:103280000000000400005066010000800000000201
-:103290000000506401000080000000010000506048
-:1032A0000100008000000002000050620100008068
-:1032B00000000002000050500100008000000004E7
-:1032C000000050540100008000000004000050582D
-:1032D00001000080000000040000505C010000803C
-:1032E000000000040000507C01000080000000018C
-:1032F0000000507D01000080000000010000401827
-:1033000000100000000000040000409000100000C9
-:1033100000000004000040980010000000000004BD
-:1033200000004110000000000000000200004112F7
-:103330000000000000000002000041140000000036
-:103340000000000200004116000000000000000222
-:103350000000604000080000000000020000604221
-:1033600000080000000000020000604400080000A7
-:103370000000000400006080000800000000000859
-:10338000000060C00040000800000008000060006D
-:1033900000080000000000020000600200080000B9
-:1033A00000000001000060040008000000000002AE
-:1033B0000000634000080000000000080000638077
-:1033C0000008000000000004000063840008000002
-:1033D00000000001000063C00008000000000002BF
-:1033E000000063C400080000000000020000640048
-:1033F0000008000000000004000070000010000041
-:103400000000000400007004001000000000000430
-:1034100000007008001000000000000400007000B0
-:103420000008000000000002000070020008000018
-:10343000000000010000700400080000000000020D
-:10344000000070400008000000000002000070440E
-:1034500000080000000000020000704600080000A4
-:10346000000000020000764800080000000000088C
-:10347000000070800008000000000002000070845E
-:10348000000800000000000200007688000800002C
-:10349000000000080000804000080000000000015B
-:1034A0000000804100080000000000010000804290
-:1034B0000008000000000001000080430008000038
-:1034C0000000000100008000000800000000000271
-:1034D00000008002000800000000000100008004DD
-:1034E0000008000000000002000080C0000800008A
-:1034F00000000002000080C200080000000000027E
-:10350000000080C40008000000000002000080806D
-:103510000008000000000001000080810008000099
-:10352000000000010000808200080000000000018F
-:10353000000080830008000000000001000080847B
-:103540000008000000000001000080850008000065
-:10355000000000010000808600080000000000015B
-:10356000000060000008000000000002000060028F
-:1035700000080000000000010000600400080000D6
-:10358000000000020000604200C0001800000002BD
-:103590000000604000C00018000000020000604C05
-:1035A00000C00018000000080000604400C00018BF
-:1035B000000000080000605700C000180000000173
-:1035C0000000605400C000180000000200006056B7
-:1035D00000C0001800000001000066400008000064
-:1035E00000000008000066800008000000000008DD
-:1035F000000066C000080000000000080000D9427A
-:1036000000180000000000020000DE400000000082
-:10361000000000000000E0000000000000000004C6
-:103620000000DD4000000000000000040000DD4458
-:1036300000000000000000040000DD480000000061
-:10364000000000040000DD4C000000000000000449
-:103650000000DD5000000000000000040000DD5408
-:1036600000000000000000040000DD580000000021
-:10367000000000040000DD40000000000000002009
-:103680000000DA0000000000000000040000DA0082
-:1036900000000000000000680000BB6000000000A7
-:1036A000000000000000D000000000000000000446
-:1036B0000000B0C000000000000000040000B0C422
-:1036C00000000000000000040000B0C8000000007E
-:1036D000000000040000B0C0000000000000001066
-:1036E0000000D6B000000000000000040000D6B4C6
-:1036F00000000000000000040000D6B80000000038
-:10370000000000040000D6BC00000000000000041F
-:103710000000D6B000000000000000100000D348F8
-:1037200000000000000000080000D3580000000066
-:1037300000000080000000100000000000000000F9
-:103740000000D35800000000000000080000000046
-:08375000060022000000000049
-:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e1h-6.2.5.0.fw.ihex b/firmware/bnx2x/bnx2x-e1h-6.2.5.0.fw.ihex
new file mode 100644
index 00000000000..5f04df69e7c
--- /dev/null
+++ b/firmware/bnx2x/bnx2x-e1h-6.2.5.0.fw.ihex
@@ -0,0 +1,13181 @@
+:1000000000004F48000000680000070C00004FB8D7
+:1000100000001ED4000056C800000094000075A027
+:1000200000009F4C00007638000000CC00011588CD
+:100030000000DC4C00011658000000940001F2A8FA
+:10004000000040000001F340000000A4000233481B
+:100050000000F38C000233F000000FFC0003278047
+:100060000000000400033780020400480000000F75
+:1000700002040054000000450204005C0000000679
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040004000000FF02040008000000FF79
+:100170000204000C000000FF02040010000000FF59
+:10018000020400140000007F02040018000000FFB9
+:100190000204001C000000FF02040020000000FF19
+:1001A000020400240000003E0204002800000000B9
+:1001B0000204002C0000003F020400300000003F59
+:1001C000020400340000003F020400380000003F39
+:1001D0000204003C0000003F020400400000003F19
+:1001E000020400440000003F020404CC00000001AF
+:1001F00002042008000002110204200C000002008A
+:10020000020420100000020402042014000002195D
+:100210000204201C0000FFFF020420200000FFFF5A
+:10022000020420240000FFFF020420280000FFFF3A
+:1002300002042038000000200604203C0000001FBB
+:10024000020420B800000001060420BC0000005F8A
+:100250000204223807FFFFFF0204223C0000003F97
+:100260000204224007FFFFFF020422440000000FA7
+:1002700001042248000000000104224C000000009C
+:10028000010422500000000001042254000000007C
+:1002900001042258000000000104225C000000005C
+:1002A000010422600000000001042264000000003C
+:1002B00001042268000000000104226C000000001C
+:1002C00001042270000000000104227400000000FC
+:1002D00001042278000000000104227C00000000DC
+:1002E0000C042000000003E80A04200000000001C4
+:1002F0000B0420000000000A0605400000000D006D
+:100300000205004400000020020500480000003201
+:10031000020500900215002002050094021500203D
+:1003200002050098000000300205009C0810000043
+:10033000020500A000000033020500A40000003008
+:10034000020500A800000031020500AC0000000218
+:10035000020500B000000005020500B40000000620
+:10036000020500B800000002020500BC0000000207
+:10037000020500C000000000020500C400000005E6
+:10038000020500C800000002020500CC00000002C7
+:10039000020500D000000002020500D400000001A8
+:1003A00002050114000000010205011C000000010B
+:1003B0000205012000000002020502040000000105
+:1003C0000205020C0000004002050210000000407F
+:1003D0000205021C0000002002050220000000139C
+:1003E0000205022400000020060502400000000A69
+:1003F00004050280002000000205005000000007F4
+:10040000020500540000000702050058000000002B
+:100410000205005C00000008020500600000000109
+:100420000605006400000003020500D80000000675
+:1004300002050004000000010205000800000001A0
+:100440000205000C00000001020500100000000180
+:100450000205001400000001020500180000000160
+:100460000205001C00000001020500200000000140
+:100470000205002400000001020500280000000120
+:100480000205002C00000001020500300000000100
+:1004900002050034000000010205003800000001E0
+:1004A0000205003C000000010205004000000001C0
+:1004B000020500E00000000D020500E80000000059
+:1004C000020500F000000000020500F80000000036
+:1004D000020500E40000002D020500EC00000020F1
+:1004E000020500F400000020020500FC00000020CE
+:1004F000020500E00000001D020500E800000010F9
+:10050000020500F000000010020500F800000010D5
+:10051000020500E40000003D020500EC0000003090
+:10052000020500F400000030020500FC000000306D
+:10053000020500E00000004D020500E80000004058
+:10054000020500F000000040020500F80000004035
+:10055000020500E40000006D020500EC00000060F0
+:10056000020500F400000060020500FC00000060CD
+:10057000020500E00000005D020500E800000050F8
+:10058000020500F000000050020500F800000050D5
+:10059000020500E40000007D020500EC0000007090
+:1005A000020500F400000070020500FC000000706D
+:1005B0000406100002000020020600DC000000011A
+:1005C000010600D80000000004060200000302201B
+:1005D000020600DC00000000010600B80000000078
+:1005E000010600C8000000000206016C00000000C7
+:1005F000010600BC00000000010600CC0000000065
+:1006000002060170000000000718040000910000BD
+:10061000081807D800050223071C00002BF700006C
+:10062000071C80002DD10AFE071D00002F461673FF
+:10063000071D800016342245081DB13049DA022515
+:100640000118000000000000011800040000000074
+:1006500001180008000000000118000C0000000054
+:100660000118001000000000011800140000000034
+:1006700002180020000000010218002400000002FF
+:1006800002180028000000030218002C00000000DF
+:1006900002180030000000040218003400000001BD
+:1006A00002180038000000000218003C00000001A1
+:1006B000021800400000000402180044000000007E
+:1006C00002180048000000010218004C000000035E
+:1006D0000218005000000000021800540000000141
+:1006E00002180058000000040218005C000000001E
+:1006F00002180060000000010218006400000003FE
+:1007000002180068000000000218006C00000001E0
+:1007100002180070000000040218007400000000BD
+:1007200002180078000000040218007C000000039A
+:100730000618008000000002021800A400003FFF1D
+:10074000021800A8000003FF0218022400000000A5
+:1007500002180234000000000218024C00000000E1
+:10076000021802E4000000FF061810000000040058
+:10077000021B8BC000000001021B8000000000343F
+:10078000021B804000000018021B80800000000C4B
+:10079000021B80C0000000200C1B83000007A1206A
+:1007A0000A1B8300000001380B1B83000000138824
+:1007B0000A1B8340000000000C1B8340000001F472
+:1007C0000B1B834000000005021B83800007A12053
+:1007D000021B83C0000001F4021B14800000000112
+:1007E0000A1B148000000000061A1000000003B36A
+:1007F000041A1ECC00010227061A1ED000000008B1
+:10080000061A2008000000C8061A20000000000296
+:10081000041AAF4000100228061A3718000000041E
+:10082000061A371000000002061A500000000002ED
+:10083000061A500800000004061A501800000004B0
+:10084000061A502800000004061A50380000000460
+:10085000061A504800000004061A50580000000410
+:10086000061A506800000004061A507800000002C2
+:10087000041A52C000020238061A40500000000656
+:10088000041A40680002023A041A40400004023C84
+:10089000041A800000010240061A800400000003D0
+:1008A000041A801000010241061A8014000000039F
+:1008B000041A802000010242061A8024000000036E
+:1008C000041A803000010243061A8034000000033D
+:1008D000041A804000010244061A8044000000030C
+:1008E000041A805000010245061A805400000003DB
+:1008F000041A806000010246061A806400000003AA
+:10090000041A807000010247061A80740000000378
+:10091000041A808000010248061A80840000000347
+:10092000041A809000010249061A80940000000316
+:10093000041A80A00001024A061A80A400000003E5
+:10094000041A80B00001024B061A80B400000003B4
+:10095000041A80C00001024C061A80C40000000383
+:10096000041A80D00001024D061A80D40000000352
+:10097000041A80E00001024E061A80E40000000321
+:10098000041A80F00001024F061A80F400000003F0
+:10099000041A810000010250061A810400000003BD
+:1009A000041A811000010251061A8114000000038C
+:1009B000041A812000010252061A8124000000035B
+:1009C000041A813000010253061A8134000000032A
+:1009D000041A814000010254061A814400000003F9
+:1009E000041A815000010255061A815400000003C8
+:1009F000041A816000010256061A81640000000397
+:100A0000041A817000010257061A81740000000365
+:100A1000041A818000010258061A81840000000334
+:100A2000041A819000010259061A81940000000303
+:100A3000041A81A00001025A061A81A400000003D2
+:100A4000041A81B00001025B061A81B400000003A1
+:100A5000041A81C00001025C061A81C40000000370
+:100A6000041A81D00001025D061A81D4000000033F
+:100A7000041A81E00001025E061A81E4000000030E
+:100A8000041A81F00001025F061A81F400000003DD
+:100A9000041A820000010260061A820400000003AA
+:100AA000041A821000010261061A82140000000379
+:100AB000041A822000010262061A82240000000348
+:100AC000041A823000010263061A82340000000317
+:100AD000041A824000010264061A824400000003E6
+:100AE000041A825000010265061A825400000003B5
+:100AF000041A826000010266061A82640000000384
+:100B0000041A827000010267061A82740000000352
+:100B1000041A828000010268061A82840000000321
+:100B2000041A829000010269061A829400000003F0
+:100B3000041A82A00001026A061A82A400000003BF
+:100B4000041A82B00001026B061A82B4000000038E
+:100B5000041A82C00001026C061A82C4000000035D
+:100B6000041A82D00001026D061A82D4000000032C
+:100B7000041A82E00001026E061A82E400000003FB
+:100B8000041A82F00001026F061A82F400000003CA
+:100B9000041A830000010270061A83040000000397
+:100BA000041A831000010271061A83140000000366
+:100BB000041A832000010272061A83240000000335
+:100BC000041A833000010273061A83340000000304
+:100BD000041A834000010274061A834400000003D3
+:100BE000041A835000010275061A835400000003A2
+:100BF000041A836000010276061A83640000000371
+:100C0000041A837000010277061A8374000000033F
+:100C1000041A838000010278061A8384000000030E
+:100C2000041A839000010279061A839400000003DD
+:100C3000041A83A00001027A061A83A400000003AC
+:100C4000041A83B00001027B061A83B4000000037B
+:100C5000041A83C00001027C061A83C4000000034A
+:100C6000041A83D00001027D061A83D40000000319
+:100C7000041A83E00001027E061A83E400000003E8
+:100C8000041A83F00001027F061A83F400000003B7
+:100C9000041A840000010280061A84040000000384
+:100CA000041A841000010281061A84140000000353
+:100CB000041A842000010282061A84240000000322
+:100CC000041A843000010283061A843400000003F1
+:100CD000041A844000010284061A844400000003C0
+:100CE000041A845000010285061A8454000000038F
+:100CF000041A846000010286061A8464000000035E
+:100D0000041A847000010287061A8474000000032C
+:100D1000041A848000010288061A848400000003FB
+:100D2000041A849000010289061A849400000003CA
+:100D3000041A84A00001028A061A84A40000000399
+:100D4000041A84B00001028B061A84B40000000368
+:100D5000041A84C00001028C061A84C40000000337
+:100D6000041A84D00001028D061A84D40000000306
+:100D7000041A84E00001028E061A84E400000003D5
+:100D8000041A84F00001028F061A84F400000003A4
+:100D9000041A850000010290061A85040000000371
+:100DA000041A851000010291061A85140000000340
+:100DB000041A852000010292061A8524000000030F
+:100DC000041A853000010293061A853400000003DE
+:100DD000041A854000010294061A854400000003AD
+:100DE000041A855000010295061A8554000000037C
+:100DF000041A856000010296061A8564000000034B
+:100E0000041A857000010297061A85740000000319
+:100E1000041A858000010298061A858400000003E8
+:100E2000041A859000010299061A859400000003B7
+:100E3000041A85A00001029A061A85A40000000386
+:100E4000041A85B00001029B061A85B40000000355
+:100E5000041A85C00001029C061A85C40000000324
+:100E6000041A85D00001029D061A85D400000003F3
+:100E7000041A85E00001029E061A85E400000003C2
+:100E8000041A85F00001029F061A85F40000000391
+:100E9000041A8600000102A0061A8604000000035E
+:100EA000041A8610000102A1061A8614000000032D
+:100EB000041A8620000102A2061A862400000003FC
+:100EC000041A8630000102A3061A863400000003CB
+:100ED000041A8640000102A4061A8644000000039A
+:100EE000041A8650000102A5061A86540000000369
+:100EF000041A8660000102A6061A86640000000338
+:100F0000041A8670000102A7061A86740000000306
+:100F1000041A8680000102A8061A868400000003D5
+:100F2000041A8690000102A9061A869400000003A4
+:100F3000041A86A0000102AA061A86A40000000373
+:100F4000041A86B0000102AB061A86B40000000342
+:100F5000041A86C0000102AC061A86C40000000311
+:100F6000041A86D0000102AD061A86D400000003E0
+:100F7000041A86E0000102AE061A86E400000003AF
+:100F8000041A86F0000102AF061A86F4000000037E
+:100F9000041A8700000102B0061A8704000000034B
+:100FA000041A8710000102B1061A8714000000031A
+:100FB000041A8720000102B2061A872400000003E9
+:100FC000041A8730000102B3061A873400000003B8
+:100FD000041A8740000102B4061A87440000000387
+:100FE000041A8750000102B5061A87540000000356
+:100FF000041A8760000102B6061A87640000000325
+:10100000041A8770000102B7061A877400000003F3
+:10101000041A8780000102B8061A878400000003C2
+:10102000041A8790000102B9061A87940000000391
+:10103000041A87A0000102BA061A87A40000000360
+:10104000041A87B0000102BB061A87B4000000032F
+:10105000041A87C0000102BC061A87C400000003FE
+:10106000041A87D0000102BD061A87D400000003CD
+:10107000041A87E0000102BE061A87E4000000039C
+:10108000041A87F0000102BF061A87F4000000036B
+:10109000041A8800000102C0061A88040000000338
+:1010A000041A8810000102C1061A88140000000307
+:1010B000041A8820000102C2061A882400000003D6
+:1010C000041A8830000102C3061A883400000003A5
+:1010D000041A8840000102C4061A88440000000374
+:1010E000041A8850000102C5061A88540000000343
+:1010F000041A8860000102C6061A88640000000312
+:10110000041A8870000102C7061A887400000003E0
+:10111000041A8880000102C8061A888400000003AF
+:10112000041A8890000102C9061A8894000000037E
+:10113000041A88A0000102CA061A88A4000000034D
+:10114000041A88B0000102CB061A88B4000000031C
+:10115000041A88C0000102CC061A88C400000003EB
+:10116000041A88D0000102CD061A88D400000003BA
+:10117000041A88E0000102CE061A88E40000000389
+:10118000041A88F0000102CF061A88F40000000358
+:10119000041A8900000102D0061A89040000000325
+:1011A000041A8910000102D1061A891400000003F4
+:1011B000041A8920000102D2061A892400000003C3
+:1011C000041A8930000102D3061A89340000000392
+:1011D000041A8940000102D4061A89440000000361
+:1011E000041A8950000102D5061A89540000000330
+:1011F000041A8960000102D6061A896400000003FF
+:10120000041A8970000102D7061A897400000003CD
+:10121000041A8980000102D8061A8984000000039C
+:10122000041A8990000102D9061A8994000000036B
+:10123000041A89A0000102DA061A89A4000000033A
+:10124000041A89B0000102DB061A89B40000000309
+:10125000041A89C0000102DC061A89C400000003D8
+:10126000041A89D0000102DD061A89D400000003A7
+:10127000041A89E0000102DE061A89E40000000376
+:10128000041A89F0000102DF061A89F40000000345
+:10129000041A8A00000102E0061A8A040000000312
+:1012A000041A8A10000102E1061A8A1400000003E1
+:1012B000041A8A20000102E2061A8A2400000003B0
+:1012C000041A8A30000102E3061A8A34000000037F
+:1012D000041A8A40000102E4061A8A44000000034E
+:1012E000041A8A50000102E5061A8A54000000031D
+:1012F000041A8A60000102E6061A8A6400000003EC
+:10130000041A8A70000102E7061A8A7400000003BA
+:10131000041A8A80000102E8061A8A840000000389
+:10132000041A8A90000102E9061A8A940000000358
+:10133000041A8AA0000102EA061A8AA40000000327
+:10134000041A8AB0000102EB061A8AB400000003F6
+:10135000041A8AC0000102EC061A8AC400000003C5
+:10136000041A8AD0000102ED061A8AD40000000394
+:10137000041A8AE0000102EE061A8AE40000000363
+:10138000041A8AF0000102EF061A8AF40000000332
+:10139000041A8B00000102F0061A8B0400000003FF
+:1013A000041A8B10000102F1061A8B1400000003CE
+:1013B000041A8B20000102F2061A8B24000000039D
+:1013C000041A8B30000102F3061A8B34000000036C
+:1013D000041A8B40000102F4061A8B44000000033B
+:1013E000041A8B50000102F5061A8B54000000030A
+:1013F000041A8B60000102F6061A8B6400000003D9
+:10140000041A8B70000102F7061A8B7400000003A7
+:10141000041A8B80000102F8061A8B840000000376
+:10142000041A8B90000102F9061A8B940000000345
+:10143000041A8BA0000102FA061A8BA40000000314
+:10144000041A8BB0000102FB061A8BB400000003E3
+:10145000041A8BC0000102FC061A8BC400000003B2
+:10146000041A8BD0000102FD061A8BD40000000381
+:10147000041A8BE0000102FE061A8BE40000000350
+:10148000041A8BF0000102FF061A8BF4000000031F
+:10149000041A8C0000010300061A8C0400000003EB
+:1014A000041A8C1000010301061A8C1400000003BA
+:1014B000041A8C2000010302061A8C240000000389
+:1014C000041A8C3000010303061A8C340000000358
+:1014D000041A8C4000010304061A8C440000000327
+:1014E000041A8C5000010305061A8C5400000003F6
+:1014F000041A8C6000010306061A8C6400000003C5
+:10150000041A8C7000010307061A8C740000000393
+:10151000041A8C8000010308061A8C840000000362
+:10152000041A8C9000010309061A8C940000000331
+:10153000041A8CA00001030A061A8CA40000000300
+:10154000041A8CB00001030B061A8CB400000003CF
+:10155000041A8CC00001030C061A8CC4000000039E
+:10156000041A8CD00001030D061A8CD4000000036D
+:10157000041A8CE00001030E061A8CE4000000033C
+:10158000041A8CF00001030F061A8CF4000000030B
+:10159000041A8D0000010310061A8D0400000003D8
+:1015A000041A8D1000010311061A8D1400000003A7
+:1015B000041A8D2000010312061A8D240000000376
+:1015C000041A8D3000010313061A8D340000000345
+:1015D000041A8D4000010314061A8D440000000314
+:1015E000041A8D5000010315061A8D5400000003E3
+:1015F000041A8D6000010316061A8D6400000003B2
+:10160000041A8D7000010317061A8D740000000380
+:10161000041A8D8000010318061A8D84000000034F
+:10162000041A8D9000010319061A8D94000000031E
+:10163000041A8DA00001031A061A8DA400000003ED
+:10164000041A8DB00001031B061A8DB400000003BC
+:10165000041A8DC00001031C061A8DC4000000038B
+:10166000041A8DD00001031D061A8DD4000000035A
+:10167000041A8DE00001031E061A8DE40000000329
+:10168000041A8DF00001031F061A8DF400000003F8
+:10169000041A8E0000010320061A8E0400000003C5
+:1016A000041A8E1000010321061A8E140000000394
+:1016B000041A8E2000010322061A8E240000000363
+:1016C000041A8E3000010323061A8E340000000332
+:1016D000041A8E4000010324061A8E440000000301
+:1016E000041A8E5000010325061A8E5400000003D0
+:1016F000041A8E6000010326061A8E64000000039F
+:10170000041A8E7000010327061A8E74000000036D
+:10171000041A8E8000010328061A8E84000000033C
+:10172000041A8E9000010329061A8E94000000030B
+:10173000041A8EA00001032A061A8EA400000003DA
+:10174000041A8EB00001032B061A8EB400000003A9
+:10175000041A8EC00001032C061A8EC40000000378
+:10176000041A8ED00001032D061A8ED40000000347
+:10177000041A8EE00001032E061A8EE40000000316
+:10178000041A8EF00001032F061A8EF400000003E5
+:10179000041A8F0000010330061A8F0400000003B2
+:1017A000041A8F1000010331061A8F140000000381
+:1017B000041A8F2000010332061A8F240000000350
+:1017C000041A8F3000010333061A8F34000000031F
+:1017D000041A8F4000010334061A8F4400000003EE
+:1017E000041A8F5000010335061A8F5400000003BD
+:1017F000041A8F6000010336061A8F64000000038C
+:10180000041A8F7000010337061A8F74000000035A
+:10181000041A8F8000010338061A8F840000000329
+:10182000041A8F9000010339061A8F9400000003F8
+:10183000041A8FA00001033A061A8FA400000003C7
+:10184000041A8FB00001033B061A8FB40000000396
+:10185000041A8FC00001033C061A8FC40000000365
+:10186000041A8FD00001033D061A8FD40000000334
+:10187000041A8FE00001033E061A8FE400000007FF
+:10188000041A62C00020033F061AD0000000007254
+:10189000061AD24800000010061AD6B00000002038
+:1018A000061AD47000000090061AD46800000002E6
+:1018B000061AA000000001C4061A30000000001043
+:1018C000061A308000000010061A310000000010D7
+:1018D000061A318000000010061A330000000012C2
+:1018E000061A339000000070061AD4580000000257
+:1018F000061AD34800000002061AD3580000002040
+:10190000061AA710000001C4061A3040000000109B
+:10191000061A30C000000010061A31400000001006
+:10192000061A31C000000010061A334800000012E9
+:10193000061A355000000070061AD460000000023C
+:10194000061AD35000000002061AD3D80000002067
+:10195000021AAE2000000000061A5000000000022B
+:10196000061A508000000012041A40000002035FB3
+:10197000041A63C000020361061A7000000000042C
+:10198000061A320000000008021AAE24000000000F
+:10199000061A501000000002061A50C8000000127B
+:1019A000041A400800020363041A63C800020365B6
+:1019B000061A701000000004061A32200000000809
+:1019C000021AAE2800000000061A50200000000293
+:1019D000061A511000000012041A4010000203679A
+:1019E000041A63D000020369061A70200000000484
+:1019F000061A324000000008021AAE2C0000000057
+:101A0000061A503000000002061A51580000001259
+:101A1000041A40180002036B041A63D80002036D15
+:101A2000061A703000000004061A32600000000838
+:101A3000021AAE3000000000061A504000000002FA
+:101A4000061A51A000000012041A40200002036F81
+:101A5000041A63E000020371061A704000000004DB
+:101A6000061A328000000008021AAE34000000009E
+:101A7000061A505000000002061A51E80000001239
+:101A8000041A402800020373041A63E80002037575
+:101A9000061A705000000004061A32A00000000868
+:101AA000021AAE3800000000061A50600000000262
+:101AB000061A523000000012041A40300002037768
+:101AC000041A63F000020379061A70600000000433
+:101AD000061A32C000000008021AAE3C00000000E6
+:101AE000061A507000000002061A52780000001218
+:101AF000041A40380002037B041A63F80002037DD5
+:101B0000061A707000000004061A32E00000000897
+:101B10000200A468000B01C80200A294071D29114D
+:101B20000200A298000000000200A29C009C042475
+:101B30000200A2A0000000000200A2A4000002090E
+:101B40000200A270000000000200A2740000000069
+:101B50000200A270000000000200A2740000000059
+:101B60000200A270000000000200A2740000000049
+:101B70000200A270000000000200A2740000000039
+:101B8000020160A000000001020160A400000262E6
+:101B9000020160A800000002020160AC0000001811
+:101BA0000201620400000001020100B40000000113
+:101BB000020100B800000001020100DC0000000189
+:101BC0000201010000000001020101040000000107
+:101BD0000201007C003000000201008400000028A7
+:101BE0000201008C0000000002010130000000042E
+:101BF0000201025C00000001020103280000000055
+:101C0000020160580000FFFF020160700000000741
+:101C10000201608000000001020105540000003054
+:101C2000020100C400000001020100CC000000011C
+:101C3000020100F800000001020100F000000001B4
+:101C4000020100800030000002010088000000282E
+:101C500002010090000000000201013400000004B5
+:101C6000020102DC000000010201032C0000000060
+:101C70000201605C0000FFFF0201607400000007C9
+:101C800002016084000000010201056400000030D0
+:101C9000020100C800000001020100D000000001A4
+:101CA000020100FC00000001020100F4000000013C
+:101CB000020C100000000028020C20080000021195
+:101CC000020C200C00000200020C20100000020494
+:101CD000020C201C0000FFFF020C20200000FFFF70
+:101CE000020C20240000FFFF020C20280000FFFF50
+:101CF000020C203800000020020C203C00000021D3
+:101D0000020C204000000022020C204400000023AE
+:101D1000020C204800000024020C204C000000258A
+:101D2000020C205000000026020C20540000002766
+:101D3000020C205800000028020C205C0000002942
+:101D4000020C20600000002A020C20640000002B1E
+:101D5000020C20680000002C020C206C0000002DFA
+:101D6000020C20700000002E020C20740000002FD6
+:101D7000020C207800000010060C207C00000007F8
+:101D8000020C209800000011020C209C00000012A0
+:101D9000020C20A000000013060C20A40000001D6F
+:101DA000020C211800000001020C211C000000019F
+:101DB000020C212000000001060C21240000001D5F
+:101DC000020C219800000001060C219C0000000775
+:101DD000020C21B800000001020C21BC000000012F
+:101DE000020C21C000000001020C21C4000000010F
+:101DF000020C21C800000001020C21CC00000001EF
+:101E0000020C21D000000001020C21D400000001CE
+:101E1000020C21D800000001020C21DC00000001AE
+:101E2000020C21E000000001020C21E4000000018E
+:101E3000020C21E800000001020C21EC000000016E
+:101E4000020C21F000000001020C21F4000000014E
+:101E5000020C21F800000001060C21FC0000000724
+:101E6000020C221800000001060C221C00000007D2
+:101E7000020C223807FFFFFF020C223C0000003F4B
+:101E8000020C224007FFFFFF020C22440000000F5B
+:101E9000010C224800000000010C224C0000000050
+:101EA000010C225000000000010C22540000000030
+:101EB000010C225800000000010C225C0000000010
+:101EC000010C226000000000010C226400000000F0
+:101ED000010C226800000000010C226C00000000D0
+:101EE000010C227000000000010C227400000000B0
+:101EF000010C227800000000010C227C0000000090
+:101F00000C0C2000000003E80A0C20000000000177
+:101F10000B0C20000000000A020C40080000101109
+:101F2000020C400C00001000020C401000001004D5
+:101F3000020C401400001021020C401C0000FFFFA6
+:101F4000020C40200000FFFF020C40240000FFFFB5
+:101F5000020C40280000FFFF020C40380000004641
+:101F6000020C403C00000010060C40400000000243
+:101F7000020C404800000018020C404C000000F029
+:101F8000060C40500000001F020C40CC0000000175
+:101F9000060C40D00000003A020C41B800000001DD
+:101FA000060C41BC00000003020C41C80000000107
+:101FB000020C41CC00000001060C41D00000001AC8
+:101FC000020C423807FFFFFF020C423C0000003FBA
+:101FD000020C424007FFFFFF020C42440000000FCA
+:101FE000010C424800000000010C424C00000000BF
+:101FF000010C425000000000010C4254000000009F
+:10200000010C425800000000010C425C000000007E
+:10201000010C426000000000010C4264000000005E
+:10202000010C426800000000010C426C000000003E
+:10203000010C427000000000010C4274000000001E
+:10204000010C427800000000010C427C00000000FE
+:10205000010C4280000000000C0C4000000003E86E
+:102060000A0C4000000000010B0C40000000000AB8
+:10207000060D400000000A00020D0044000000327E
+:10208000020D008C02150020020D009002150020A8
+:10209000020D009408100000020D009800000033AB
+:1020A000020D009C00000002020D00A000000000D4
+:1020B000020D00A400000005020D00A800000005AC
+:1020C000060D00AC00000002020D00B4000000028A
+:1020D000020D00B800000003020D00BC0000000269
+:1020E000020D00C000000001020D00C80000000247
+:1020F000020D00CC00000002020D015C0000000196
+:10210000020D016400000001020D016800000002E0
+:10211000020D020400000001020D020C000000206C
+:10212000020D021000000040020D021400000040E9
+:10213000020D022000000003020D0224000000181E
+:10214000060D028000000012040D03000018037F3A
+:10215000060D03600000000C020D004C00000001A1
+:10216000020D005000000002020D005400000000AB
+:10217000020D005800000008060D005C000000047D
+:10218000020D00C400000004020D00040000000164
+:10219000020D000800000001020D000C000000010B
+:1021A000020D001000000001020D001400000001EB
+:1021B000020D001800000001020D001C00000001CB
+:1021C000020D002000000001020D002400000001AB
+:1021D000020D002800000001020D002C000000018B
+:1021E000020D003000000001020D0034000000016B
+:1021F000020D003800000001020D003C000000014B
+:10220000020D011400000009020D011C0000000A6B
+:10221000020D012400000000020D012C000000004E
+:10222000020D013400000000020D013C0000000B13
+:10223000020D014400000000020D011800000029F9
+:10224000020D01200000002A020D012800000020DC
+:10225000020D013000000020020D013800000020B6
+:10226000020D01400000002B020D0148000000207B
+:10227000020D011400000019020D011C0000001ADB
+:10228000020D012400000010020D012C00000010BE
+:10229000020D013400000010020D013C0000001B83
+:1022A000020D014400000010020D01180000003969
+:1022B000020D01200000003A020D0128000000304C
+:1022C000020D013000000030020D01380000003026
+:1022D000020D01400000003B020D014800000030EB
+:1022E000020D011400000049020D011C0000004A0B
+:1022F000020D012400000040020D012C00000040EE
+:10230000020D013400000040020D013C0000004BB2
+:10231000020D014400000040020D01180000006998
+:10232000020D01200000006A020D0128000000607B
+:10233000020D013000000060020D01380000006055
+:10234000020D01400000006B020D0148000000601A
+:10235000020D011400000059020D011C0000005A7A
+:10236000020D012400000050020D012C000000505D
+:10237000020D013400000050020D013C0000005B22
+:10238000020D014400000050020D01180000007908
+:10239000020D01200000007A020D012800000070EB
+:1023A000020D013000000070020D013800000070C5
+:1023B000020D01400000007B020D0148000000708A
+:1023C000060E200000000800020E004C0000003243
+:1023D000020E009402150020020E00980215002043
+:1023E000020E009C00000030020E00A00810000049
+:1023F000020E00A400000033020E00A8000000300E
+:10240000020E00AC00000031020E00B0000000021D
+:10241000020E00B400000004020E00B8000000002C
+:10242000020E00BC00000002020E00C0000000020C
+:10243000020E00C400000000020E00C800000002EE
+:10244000020E00CC00000007020E00D000000002C7
+:10245000020E00D400000002020E00D800000001AD
+:10246000020E014400000001020E014C00000001B8
+:10247000020E015000000002020E020400000001E2
+:10248000020E020C00000040020E0210000000408C
+:10249000020E021C00000004020E022000000020B8
+:1024A000020E02240000000E020E02280000001B93
+:1024B000060E030000000012040E0280001B0397AA
+:1024C000060E02EC00000005020E00540000000C95
+:1024D000020E00580000000C020E005C000000001C
+:1024E000020E006000000010020E006400000010E8
+:1024F000060E006800000003020E00DC000000036E
+:10250000020E000400000001020E0008000000019D
+:10251000020E000C00000001020E0010000000017D
+:10252000020E001400000001020E0018000000015D
+:10253000020E001C00000001020E0020000000013D
+:10254000020E002400000001020E0028000000011D
+:10255000020E002C00000001020E003000000001FD
+:10256000020E003400000001020E003800000001DD
+:10257000020E003C00000001020E004000000001BD
+:10258000020E004400000001020E01100000000FC6
+:10259000020E011800000000020E012000000000E1
+:1025A000020E012800000000020E01140000002F9E
+:1025B000020E011C00000020020E01240000000099
+:1025C000020E012C00000000020E01100000001F8E
+:1025D000020E011800000010020E01200000000091
+:1025E000020E012800000000020E01140000003F4E
+:1025F000020E011C00000030020E01240000000049
+:10260000020E012C00000000020E01100000004F1D
+:10261000020E011800000040020E01200000000020
+:10262000020E012800000000020E01140000006FDD
+:10263000020E011C00000060020E012400000000D8
+:10264000020E012C00000000020E01100000005FCD
+:10265000020E011800000050020E012000000000D0
+:10266000020E012800000000020E01140000007F8D
+:10267000020E011C00000070020E01240000000088
+:10268000020E012C000000000730040000C9000009
+:10269000083007D8000503B20734000033320000C9
+:1026A0000734800030A70CCD07350000353518F70A
+:1026B000073580002A6226450736000018D330DE31
+:1026C00008364660373403B40130000000000000D3
+:1026D000013000040000000001300008000000008C
+:1026E0000130000C0000000001300010000000006C
+:1026F0000130001400000000023000200000000142
+:102700000230002400000002023000280000000314
+:102710000230002C000000000230003000000004F5
+:1027200002300034000000010230003800000000D8
+:102730000230003C000000010230004000000004B4
+:102740000230004400000000023000480000000198
+:102750000230004C00000003023000500000000076
+:102760000230005400000001023000580000000454
+:102770000230005C00000000023000600000000138
+:102780000230006400000003023000680000000016
+:102790000230006C000000010230007000000004F4
+:1027A00002300074000000000230007800000004D5
+:1027B0000230007C000000030630008000000002B0
+:1027C000023000A400003FFF023000A8000003FF19
+:1027D0000230022400000000023002340000000039
+:1027E0000230024C00000000023002E40000FFFF53
+:1027F000063020000000080002338BC000000001FA
+:10280000023380000000001A023380400000004EB6
+:102810000233808000000010023380C000000020DE
+:102820000C3383000007A1200A3383000000013825
+:102830000B338300000013880A338340000000003C
+:102840000C338340000001F40B338340000000058B
+:10285000023383800007A120023383C0000001F40B
+:1028600002331480000000010A33148000000000CD
+:10287000063280000000010206322008000000C875
+:10288000063220000000000204328EA0001003B6C1
+:1028900006323EB00000000606323ED800000002BC
+:1028A00006323E800000000A04323EA8000203C641
+:1028B00006323E00000000200632500000000400F6
+:1028C0000632400000000004043274C0000203C855
+:1028D00006324110000000020632D0000000003035
+:1028E0000632DD40000000440632DA00000000D06D
+:1028F0000632DEA0000000020632E0000000080000
+:1029000006328450000001180632100000000188D1
+:102910000632500000000020063251000000002066
+:102920000632520000000020063253000000002052
+:10293000063254000000002006325500000000203E
+:10294000063256000000002006325700000000202A
+:102950000632580000000020063259000000002016
+:1029600006325A000000002006325B000000002002
+:1029700006325C000000002006325D0000000020EE
+:1029800006325E000000002006325F0000000020DA
+:1029900006328DF00000000204328E00000203CAED
+:1029A00006328E08000000020632DE9000000002AF
+:1029B00006321C4000000038063288B000000118C2
+:1029C00006321620000001880632508000000020E8
+:1029D00006325180000000200632528000000020A4
+:1029E0000632538000000020063254800000002090
+:1029F000063255800000002006325680000000207C
+:102A00000632578000000020063258800000002067
+:102A1000063259800000002006325A800000002053
+:102A200006325B800000002006325C80000000203F
+:102A300006325D800000002006325E80000000202B
+:102A400006325F800000002006328DF80000000290
+:102A500004328E10000203CC06328E1800000002F1
+:102A60000632DE980000000206321D200000003809
+:102A700002328D50000000000632401000000002BB
+:102A800002328D5400000000063240200000000297
+:102A900002328D5800000000063240300000000273
+:102AA00002328D5C0000000006324040000000024F
+:102AB00002328D600000000006324050000000022B
+:102AC00002328D6400000000063240600000000207
+:102AD00002328D68000000000632407000000002E3
+:102AE00002328D6C000000000632408000000002BF
+:102AF000072004000091000008200780001003CE8A
+:102B0000072400002AF300000724800015090ABDED
+:102B10000824A9F0692803D001200000000000006B
+:102B20000120000400000000012000080000000057
+:102B30000120000C00000000012000100000000037
+:102B4000012000140000000002200020000000010D
+:102B500002200024000000020220002800000003E0
+:102B60000220002C000000000220003000000004C1
+:102B700002200034000000010220003800000000A4
+:102B80000220003C00000001022000400000000480
+:102B90000220004400000000022000480000000164
+:102BA0000220004C00000003022000500000000042
+:102BB0000220005400000001022000580000000420
+:102BC0000220005C00000000022000600000000104
+:102BD00002200064000000030220006800000000E2
+:102BE0000220006C000000010220007000000004C0
+:102BF00002200074000000000220007800000004A1
+:102C00000220007C0000000306200080000000027B
+:102C1000022000A400003FFF022000A8000003FFE4
+:102C20000220022400000000022002340000000004
+:102C30000220024C00000000022002E40000FFFF1E
+:102C4000062020000000080002238BC000000001C5
+:102C500002238000000000100223804000000012C8
+:102C60000223808000000030022380C00000000E9C
+:102C70000C2383000007A1200A23830000000138F1
+:102C80000B238300000013880A2383400000000008
+:102C90000C238340000001F40B2383400000000557
+:102CA000022383800007A120022383C0000001F4D7
+:102CB00002231480000000010A2314800000000099
+:102CC000062210000000004206222008000000C872
+:102CD00006222000000000020622B000000000C60C
+:102CE0000422B318000503D20622B32C0000000B07
+:102CF0000422B358000503D70622B36C0000000B72
+:102D00000422B398000503DC0622B3AC0000000BDC
+:102D10000422B3D8000503E10622B3EC0000000B47
+:102D20000422B418000503E60622B42C0000000BB0
+:102D30000422B458000503EB0622B46C0000000B1B
+:102D40000422B498000503F00622B4AC0000000B86
+:102D50000422B4D8000503F50622B4EC0000000BF1
+:102D60000422B518000503FA0622B52C0000000B5A
+:102D70000422B558000503FF0622B56C0000000BC5
+:102D80000422B598000504040622B5AC0000000B2F
+:102D90000422B5D8000504090622B5EC0000000B9A
+:102DA0000422B6180005040E0622B62C0000000B03
+:102DB0000422B658000504130622B66C0000000B6E
+:102DC0000422B698000504180622B6AC0000000BD9
+:102DD0000422B6D80005041D0622B6EC0000000B44
+:102DE0000422B718000504220622B72C0000000BAD
+:102DF0000422B758000504270622B76C0000000B18
+:102E00000422B7980005042C0622B7AC0000000B82
+:102E10000422B7D8000504310622B7EC0000000BED
+:102E20000422B818000504360622B82C0000000B56
+:102E30000422B8580005043B0622B86C0000000BC1
+:102E40000422B898000504400622B8AC0000000B2C
+:102E50000422B8D8000504450622B8EC0000000B97
+:102E60000422B9180005044A0622B92C0000000B00
+:102E70000422B9580005044F0622B96C0000000B6B
+:102E80000422B998000504540622B9AC0000000BD6
+:102E90000422B9D8000504590622B9EC0000000B41
+:102EA0000422BA180005045E0622BA2C0000000BAA
+:102EB0000422BA58000504630622BA6C0000000B15
+:102EC0000422BA98000504680622BAAC0000000B80
+:102ED0000422BAD80005046D0622BAEC00000005F1
+:102EE0000622BB00000000530422BC4C0001047207
+:102EF0000622BC50000000030422BC5C00010473E5
+:102F00000622BC60000000030422BC6C00010474B3
+:102F10000622BC70000000030422BC7C0001047582
+:102F20000622BC80000000030422BC8C0001047651
+:102F30000622BC90000000030422BC9C0001047720
+:102F40000622BCA0000000030422BCAC00010478EF
+:102F50000622BCB0000000030422BCBC00010479BE
+:102F60000622880000000100062280000000020006
+:102F7000042212700010047A06223000000000C003
+:102F800006226700000001000622900000000400F5
+:102F900004226B080020048A022212C0FFFFFFFFF8
+:102FA000062211E800000002062212C800000009F3
+:102FB000062212EC0000000906228C000000000826
+:102FC0000222114800000000062213200000000623
+:102FD000062233000000000206226040000000309C
+:102FE00006228C20000000080222114C0000000084
+:102FF00006221338000000060622330800000002F3
+:10300000062261000000003006228C40000000080B
+:10301000022211500000000006221350000000069A
+:103020000622331000000002062261C000000030BA
+:1030300006228C60000000080222115400000000EB
+:103040000622136800000006062233180000000262
+:10305000062262800000003006228C8000000008FA
+:103060000222115800000000062213800000000612
+:1030700006223320000000020622634000000030D8
+:1030800006228CA0000000080222115C0000000053
+:1030900006221398000000060622332800000002D2
+:1030A000062264000000003006228CC000000008E8
+:1030B0000222116000000000062213B0000000068A
+:1030C0000622333000000002062264C000000030F7
+:1030D00006228CE0000000080222116400000000BB
+:1030E000062213C800000006062233380000000242
+:1030F0000622658000000030021610000000002843
+:1031000002170008000000020217002C0000000354
+:103110000217003C000000040217004800000002F3
+:103120000217004C000000900217005000000090B1
+:103130000217005400800090021700580810000089
+:10314000021700600000008A02170064000000807F
+:1031500002170068000000810217006C0000008068
+:10316000021700700000000602170078000007D068
+:103170000217007C0000076C02170038007C100466
+:10318000021700040000000F061640240000000291
+:10319000021640700000001C0216420800000001E8
+:1031A0000216421000000001021642200000000139
+:1031B0000216422800000001021642300000000101
+:1031C00002164238000000010216426000000002B0
+:1031D0000C16401C0003D0900A16401C0000009CF6
+:1031E0000B16401C000009C4021640300000000805
+:1031F000021640340000000C021640380000001097
+:1032000002164044000000200216400000000001A9
+:10321000021640D80000000102164008000000011C
+:103220000216400C000000010216401000000001D0
+:103230000216424000000000021642480000000052
+:103240000616427000000002021642500000000004
+:1032500002164258000000000616428000000002DC
+:1032600002166008000012240216600C0000121002
+:1032700002166010000012140216601C0000FFFF0E
+:10328000021660200000FFFF021660240000FFFF0E
+:10329000021660280000FFFF0216603800000020C0
+:1032A0000216603C0000002006166040000000028C
+:1032B00002166048000000230216604C0000002443
+:1032C000021660500000002502166054000000261F
+:1032D00002166058000000270216605C00000029FA
+:1032E000021660600000002A021660640000002BD5
+:1032F000021660680000002C0216606C0000002DB1
+:1033000002166070000000EC0216607400000011EC
+:1033100002166078000000120616607C0000000FA4
+:10332000021660B800000001021660BC0000000137
+:10333000061660C00000000C021660F000000001DC
+:10334000061660F400000031021661B800000001AA
+:10335000061661BC0000000D021661F000000001BD
+:10336000061661F4000000110216623807FFFFFF25
+:103370000216623C0000003F0216624007FFFFFF9A
+:10338000021662440000000F0116624800000000AF
+:103390000116624C0000000001166250000000009F
+:1033A000011662540000000001166258000000007F
+:1033B0000116625C0000000001166260000000005F
+:1033C000011662640000000001166268000000003F
+:1033D0000116626C0000000001166270000000001F
+:1033E00001166274000000000116627800000000FF
+:1033F0000116627C000000000C166000000003E86B
+:103400000A166000000000010B1660000000000AB0
+:1034100002168040000000060216804400000005ED
+:10342000021680480000000A0216804C00000005C9
+:103430000216805400000002021680CC0000000436
+:10344000021680D000000004021680D400000004A0
+:10345000021680D800000004021680DC0000000480
+:10346000021680E000000004021680E40000000460
+:10347000021680E800000004021688040000000420
+:10348000021680300000007C021680340000003DEF
+:10349000021680380000003F0216803C0000009CAD
+:1034A000021680F000000007061680F400000005F8
+:1034B0000216880C010101010216810800000000BB
+:1034C0000216810C000000040216811000000004A6
+:1034D0000216811400000002021688100801200460
+:1034E00002168118000000050216811C000000056C
+:1034F000021681200000000502168124000000054C
+:103500000216882C200810010216812800000008ED
+:103510000216812C00000006021681300000000710
+:1035200002168134000000000216883001010120DB
+:1035300006168138000000040216883401010101DA
+:1035400002168148000000000216814C00000004B1
+:10355000021681500000000402168154000000028F
+:103560000216883808012004021681580000000560
+:103570000216815C00000005021681600000000553
+:1035800002168164000000050216883C2008100124
+:1035900002168168000000080216816C0000000617
+:1035A00002168170000000070216817400000001FD
+:1035B00002168840010101200216817800000001F6
+:1035C0000216817C000000010216818000000001CB
+:1035D00002168184000000010216884401010101E5
+:1035E00002168188000000010216818C0000000490
+:1035F000021681900000000402168194000000026F
+:10360000021688480801200402168198000000056F
+:103610000216819C00000005021681A00000000532
+:10362000021681A40000000502168814200810016B
+:10363000021681A800000008021681AC00000006F6
+:10364000021681B000000007021681B400000001DC
+:103650000216881801010120021681B8000000013D
+:10366000021681BC00000001021681C000000001AA
+:10367000021681C4000000010216881C010101012C
+:10368000021681C800000001021681CC000000046F
+:10369000021681D000000004021681D4000000024E
+:1036A0000216882008012004021681D800000005B7
+:1036B000021681DC00000005021681E00000000512
+:1036C000021681E40000000502168824200810017B
+:1036D000021681E800000008021681EC00000006D6
+:1036E000021681F0000000070216E40C0000000042
+:1036F00002168828010101200616E41000000004CB
+:103700000216E000010101010216E42000000000A1
+:103710000216E424000000040216E428000000045D
+:103720000216E42C000000020216E0040801200446
+:103730000216E430000000050216E4340000000523
+:103740000216E438000000050216E43C0000000503
+:103750000216E008200810010216E44000000008EC
+:103760000216E444000000060216E44800000007C8
+:103770000216E44C000000000216E00C01010120DA
+:103780000616E450000000040216E01001010101D9
+:103790000216E460000000000216E4640000000469
+:1037A0000216E468000000040216E46C0000000247
+:1037B0000216E014080120040216E470000000055F
+:1037C0000216E474000000050216E478000000050B
+:1037D0000216E47C000000050216E0182008100123
+:1037E0000216E480000000080216E48400000006CF
+:1037F0000216E488000000070216E48C00000001B5
+:103800000216E01C010101200216E49000000001F4
+:103810000216E494000000010216E4980000000182
+:103820000216E49C000000010216E02001010101E3
+:103830000216E4A0000000010216E4A40000000447
+:103840000216E4A8000000040216E4AC0000000226
+:103850000216E024080120040216E4B0000000056E
+:103860000216E4B4000000050216E4B800000005EA
+:103870000216E4BC000000050216E0282008100132
+:103880000216E4C0000000080216E4C400000006AE
+:103890000216E4C8000000070216E4CC0000000194
+:1038A0000216E02C010101200216E4D00000000104
+:1038B0000216E4D4000000010216E4D80000000162
+:1038C0000216E4DC000000010216E03001010101F3
+:1038D0000216E4E0000000010216E4E40000000427
+:1038E0000216E4E8000000040216E4EC0000000206
+:1038F0000216E034080120040216E4F0000000057E
+:103900000216E4F4000000050216E4F800000005C9
+:103910000216E4FC000000050216E0382008100141
+:103920000216E500000000080216E504000000068B
+:103930000216E508000000070216E03C0101012024
+:1039400002168240003F003F021682440000000041
+:103950000216E524003F003F0216E52800000000A3
+:1039600002168248000000000216824C003F003F11
+:103970000216E52C000000000216E530003F003F73
+:10398000021682500100010002168254010001005B
+:103990000216E534010001000216E53801000100BD
+:1039A00006168258000000020216E53C00000000E6
+:1039B0000216E540000000000216826000C000C050
+:1039C0000216826400C000C00216E54400C000C0B8
+:1039D0000216E54800C000C0021682681E001E00E4
+:1039E0000216826C1E001E000216E54C1E001E0010
+:1039F0000216E5501E001E000216827040004000B4
+:103A000002168274400040000216E5544000400057
+:103A10000216E558400040000216827880008000BF
+:103A20000216827C800080000216E55C8000800027
+:103A30000216E560800080000216828020002000CF
+:103A400002168284200020000216E5642000200077
+:103A50000216E56820002000061682880000000299
+:103A60000216E56C000000000216E5700000000080
+:103A700002168290000000000216829400000000EE
+:103A80000216E574000000000216E5780000000050
+:103A900002168298000000000216829C00000000BE
+:103AA0000216E57C000000000216E5800000000020
+:103AB000021682A000000000021682A4000000018D
+:103AC000061682A80000000A021681F400000C0805
+:103AD000021681F800000040021681FC000001007F
+:103AE0000216820000000020021682040000001767
+:103AF00002168208000000800216820C00000200FC
+:103B000002168210000000000216821801FF01FF59
+:103B10000216821401FF01FF0216E51001FF01FFEA
+:103B20000216E50C01FF01FF0216823C00000013A3
+:103B3000021680900000013F0216806000000140E4
+:103B40000216806400000140061680680000000232
+:103B500002168070000000C0061680740000000786
+:103B60000216809C00000048021680A00000004859
+:103B7000061680A400000002021680AC0000004877
+:103B8000061680B000000007021682380000800090
+:103B900002168234000025E40216809400007FFFA4
+:103BA00002168220000F000F0216821C000F000F69
+:103BB0000216E518000F000F0216E514000F000FA3
+:103BC000021682280000000002168224FFFFFFFF79
+:103BD0000216E520000000000216E51CFFFFFFFFB3
+:103BE0000216E6BC000000000216E6C0000000025B
+:103BF0000216E6C4000000010216E6C80000000339
+:103C00000216E6CC000000040216E6D00000000612
+:103C10000216E6D4000000050216E6D800000007F0
+:103C2000021680EC000000FF0214000000000001FA
+:103C30000214000C0000000102140040000000010A
+:103C40000214004400007FFF0214000C000000007A
+:103C500002140000000000000214006C00000000CC
+:103C600002140004000000010214003000000001F2
+:103C700002140004000000000214005C00000000B8
+:103C800002140008000000010214003400000001CA
+:103C90000214000800000000021400600000000090
+:103CA00006028000000020000202005800000032DE
+:103CB000020200A003150020020200A40315002048
+:103CC000020200A801000030020200AC081000004F
+:103CD000020200B000000033020200B40000003015
+:103CE000020200B800000031020200BC0000000324
+:103CF000020200C000000006020200C4000000032F
+:103D0000020200C800000003020200CC0000000212
+:103D1000020200D000000000020200D400000002F5
+:103D2000020200DC00000000020200E000000006C9
+:103D3000020200E400000004020200E800000002A9
+:103D4000020200EC00000002020200F0000000018C
+:103D5000020200FC00000006020201200000000038
+:103D60000202013400000002020201B00000000162
+:103D70000202020C00000001020202140000000115
+:103D80000202021800000002020204040000000106
+:103D90000202040C00000040020204100000004077
+:103DA0000202041C000000040202042000000020A3
+:103DB0000202042400000002020204280000002085
+:103DC000060205000000001204020480002004AA7C
+:103DD000020200600000000F020200640000000701
+:103DE00002020068000000000202006C0000000EE9
+:103DF000020200700000000E0602007400000003C2
+:103E0000020200F4000000040202000400000001AD
+:103E100002020008000000010202000C0000000184
+:103E20000202001000000001020200140000000164
+:103E300002020018000000010202001C0000000144
+:103E40000202002000000001020200240000000124
+:103E500002020028000000010202002C0000000104
+:103E600002020030000000010202003400000001E4
+:103E700002020038000000010202003C00000001C4
+:103E800002020040000000010202004400000001A4
+:103E900002020048000000010202004C0000000184
+:103EA000020200500000000102020108000000C8E8
+:103EB0000202011800000002020201C4000000001A
+:103EC000020201CC00000000020201D40000000246
+:103ED000020201DC00000002020201E4000000FF17
+:103EE000020201EC000000FF0202010000000000DD
+:103EF0000202010C000000C80202011C00000002C6
+:103F0000020201C800000000020201D0000000000F
+:103F1000020201D800000002020201E000000002DB
+:103F2000020201E8000000FF020201F0000000FFB1
+:103F3000020201040000000002020108000000C8A3
+:103F40000202011800000002020201C40000000089
+:103F5000020201CC00000000020201D400000002B5
+:103F6000020201DC00000002020201E4000000FF86
+:103F7000020201EC000000FF02020100000000004C
+:103F80000202010C000000C80202011C0000000235
+:103F9000020201C800000000020201D0000000007F
+:103FA000020201D800000002020201E0000000024B
+:103FB000020201E8000000FF020201F0000000FF21
+:103FC000020201040000000002020108000000C813
+:103FD0000202011800000002020201C400000000F9
+:103FE000020201CC00000000020201D40000000225
+:103FF000020201DC00000002020201E4000000FFF6
+:10400000020201EC000000FF0202010000000000BB
+:104010000202010C000000C80202011C00000002A4
+:10402000020201C800000000020201D000000000EE
+:10403000020201D800000002020201E000000002BA
+:10404000020201E8000000FF020201F0000000FF90
+:10405000020201040000000002020108000000C882
+:104060000202011800000002020201C40000000068
+:10407000020201CC00000000020201D40000000294
+:10408000020201DC00000002020201E4000000FF65
+:10409000020201EC000000FF02020100000000002B
+:1040A0000202010C000000C80202011C0000000214
+:1040B000020201C800000000020201D0000000005E
+:1040C000020201D800000002020201E0000000022A
+:1040D000020201E8000000FF020201F0000000FF00
+:1040E00002020104000000000728040000A00000F4
+:1040F000082807B8000904CA072C000034DA0000B9
+:10410000072C800038F80D37072D000037B91B76D3
+:10411000072D800031782965072E00001C7A35C4F0
+:10412000082E48E036E404CC01280000000000001E
+:104130000128000400000000012800080000000021
+:104140000128000C00000000012800100000000001
+:1041500001280014000000000228002000000001D7
+:1041600002280024000000020228002800000003AA
+:104170000228002C0000000002280030000000048B
+:10418000022800340000000102280038000000006E
+:104190000228003C0000000102280040000000044A
+:1041A000022800440000000002280048000000012E
+:1041B0000228004C0000000302280050000000000C
+:1041C00002280054000000010228005800000004EA
+:1041D0000228005C000000000228006000000001CE
+:1041E00002280064000000030228006800000000AC
+:1041F0000228006C0000000102280070000000048A
+:10420000022800740000000002280078000000046A
+:104210000228007C00000003062800800000000245
+:10422000022800A400003FFF022800A8000003FFAE
+:1042300002280224000000000228023400000000CE
+:104240000228024C00000000022802E40000FFFFE8
+:104250000628200000000800022B8BC0000000018F
+:10426000022B800000000000022B8040000000189C
+:10427000022B80800000000C022B80C00000006632
+:104280000C2B83000007A1200A2B830000000138BB
+:104290000B2B8300000013880A2B834000000000D2
+:1042A0000C2B8340000001F40B2B83400000000521
+:1042B000022B83800007A120022B83C0000001F4A1
+:1042C000022B1480000000010A2B14800000000063
+:1042D000062A9AF800000004042A9B08000204CE73
+:1042E000062A9B1000000006062A90800000004865
+:1042F000062A2008000000C8062A2000000000024C
+:10430000062A91A800000086062A900000000020DE
+:10431000062A93C800000003042A93D4000104D0A5
+:10432000062A9DA800000002042A9498000404D1E3
+:10433000042A9D58000104D5062A9D5C0000001146
+:10434000042ACB20001004D6042A3000000204E620
+:10435000062A300800000100062A40400000001034
+:10436000042A4000001004E8042A8408000204F82B
+:10437000062A9DA000000002062AB000000000509E
+:10438000062ABB7000000070062AB150000000022F
+:10439000062ABB6000000004062AD00000000800C6
+:1043A000062AC00000000150062A94A8000000322E
+:1043B000062A502000000002062A503000000002A9
+:1043C000062A500000000002062A501000000002D9
+:1043D000022A520800000001042A9B28000204FA65
+:1043E000062A963800000022042A96C0000104FC28
+:1043F000062A96C400000003062A976800000022DF
+:10440000042A97F0000104FD062A97F40000000337
+:10441000062A989800000022042A9920000104FE30
+:10442000062A992400000003062A99C800000022E9
+:10443000042A9A50000104FF062A9A54000000033F
+:10444000062AB14000000002062AC54000000150C3
+:10445000062A957000000032062A5028000000024B
+:10446000062A503800000002062A50080000000208
+:10447000062A501800000002022A520C0000000117
+:10448000042A9B3000020500062A96D00000002274
+:10449000042A975800010502062A975C00000003D1
+:1044A000062A980000000022042A988800010503CB
+:1044B000062A988C00000003062A9930000000228A
+:1044C000042A99B800010504062A99BC00000003DB
+:1044D000062A9A6000000022042A9AE800010505D5
+:1044E000062A9AEC00000003062AB14800000002E8
+:1044F000022ACA8000000000042A9B38001005062A
+:10450000062A50480000000E022ACA84000000005B
+:10451000042A9B7800100516062A50800000000E21
+:10452000022ACA8800000000042A9BB80010052651
+:10453000062A50B80000000E022ACA8C00000000B3
+:10454000042A9BF800100536062A50F00000000EE1
+:10455000022ACA9000000000042A9C380010054678
+:10456000062A51280000000E022ACA94000000000A
+:10457000042A9C7800100556062A51600000000E9F
+:10458000022ACA9800000000042A9CB800100566A0
+:10459000062A51980000000E022ACA9C0000000062
+:1045A000042A9CF800100576062A51D00000000E5F
+:1045B000021010080000000102101050000000015D
+:1045C000021010000003D000021010040000003D93
+:1045D0000910180002000586091011000010078656
+:1045E0000610114000000008091011600010079625
+:1045F000061011A00000001806102400000000E0C2
+:104600000210201C00000000021020200000000109
+:10461000021020C00000000202102004000000016F
+:10462000021020080000000109103C00000507A648
+:1046300009103800000507AB09103820000507B045
+:1046400006104C000000010002104028000000107D
+:104650000210404400003FFF0210405800280000B4
+:10466000021040840084924A02104058000000006A
+:104670000210800000001080021080AC00000000DA
+:1046800002108038000000100210810000000000BD
+:10469000061081200000000202108008000002B510
+:1046A0000210801000000000061082000000004A86
+:1046B000021081080001FFFF061081400000000287
+:1046C0000210800000001A800610900000000024F4
+:1046D000061091200000004A061093700000004A66
+:1046E000061095C00000004A0210800400001080EF
+:1046F000021080B0000000010210803C0000001099
+:104700000210810400000000061081280000000251
+:104710000210800C000002B502108014000000009E
+:10472000061084000000004A0210810C0001FFFF07
+:1047300006108148000000020210800400001A8068
+:104740000610909000000024061092480000004AD5
+:10475000061094980000004A061096E80000004AEF
+:104760000210800000001080021080AC00000002E7
+:1047700002108038000000100210810000000000CC
+:10478000061081200000000202108008000002B51F
+:104790000210801000000000061082000000004A95
+:1047A000021081080001FFFF061081400000000296
+:1047B0000210800000001A80061090000000002403
+:1047C000061091200000004A061093700000004A75
+:1047D000061095C00000004A0210800400001080FE
+:1047E000021080B0000000030210803C00000010A6
+:1047F0000210810400000000061081280000000261
+:104800000210800C000002B50210801400000000AD
+:10481000061084000000004A0210810C0001FFFF16
+:1048200006108148000000020210800400001A8077
+:104830000610909000000024061092480000004AE4
+:10484000061094980000004A061096E80000004AFE
+:104850000210800000001080021080AC00000004F4
+:1048600002108038000000100210810000000000DB
+:10487000061081200000000202108008000002B52E
+:104880000210801000000000061082000000004AA4
+:10489000021081080001FFFF0610814000000002A5
+:1048A0000210800000001A80061090000000002412
+:1048B000061091200000004A061093700000004A84
+:1048C000061095C00000004A02108004000010800D
+:1048D000021080B0000000050210803C00000010B3
+:1048E0000210810400000000061081280000000270
+:1048F0000210800C000002B50210801400000000BD
+:10490000061084000000004A0210810C0001FFFF25
+:1049100006108148000000020210800400001A8086
+:104920000610909000000024061092480000004AF3
+:10493000061094980000004A061096E80000004A0D
+:104940000210800000001080021080AC0000000601
+:1049500002108038000000100210810000000000EA
+:10496000061081200000000202108008000002B53D
+:104970000210801000000000061082000000004AB3
+:10498000021081080001FFFF0610814000000002B4
+:104990000210800000001A80061090000000002421
+:1049A000061091200000004A061093700000004A93
+:1049B000061095C00000004A02108004000010801C
+:1049C000021080B0000000070210803C00000010C0
+:1049D000021081040000000006108128000000027F
+:1049E0000210800C000002B50210801400000000CC
+:1049F000061084000000004A0210810C0001FFFF35
+:104A000006108148000000020210800400001A8095
+:104A10000610909000000024061092480000004A02
+:104A2000061094980000004A061096E80000004A1C
+:104A3000021205B0000000010212049000E383405E
+:104A40000212051400003C100212066C0000000166
+:104A5000021206700000000002120494FFFFFFFF24
+:104A600002120498FFFFFFFF0212049CFFFFFFFFEA
+:104A7000021204A0FFFFFFFF021204A4FFFFFFFFCA
+:104A8000021204A8FFFFFFFF021204ACFFFFFFFFAA
+:104A9000021204B0FFFFFFFF021204BCFFFFFFFF82
+:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
+:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
+:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
+:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
+:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
+:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
+:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
+:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
+:104B200002120504FFFFFFFF02120508FFFFFFFF4F
+:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
+:104B4000021204D4FF809000021204B4F00050005E
+:104B5000021204B8F00010000212039000000008D6
+:104B60000212039C00000008021203A000000008CB
+:104B7000021203A400000002021203BC00000004A1
+:104B8000021203C000000005021203C4000000046A
+:104B9000021203D0000000000212036C00000001AA
+:104BA000021203680000003F021201BC0000004036
+:104BB000021201C000001808021201C4000008031C
+:104BC000021201C800000803021201CC00000040DC
+:104BD000021201D000000003021201D400000803F9
+:104BE000021201D800000803021201DC00000803D1
+:104BF000021201E000010003021201E400000803B8
+:104C0000021201E800000803021201EC0000000398
+:104C1000021201F000000003021201F40000000380
+:104C2000021201F800000003021201FC0000000360
+:104C3000021202000000000302120204000000033E
+:104C400002120208000000030212020C000000031E
+:104C500002120210000000030212021400000003FE
+:104C600002120218000000030212021C00000003DE
+:104C700002120220000000030212022400000003BE
+:104C800002120228000024030212022C0000002F4E
+:104C90000212023000000009021202340000001962
+:104CA00002120238000001840212023C000001835B
+:104CB0000212024000000306021202440000001922
+:104CC00002120248000000060212024C0000030615
+:104CD00002120250000003060212025400000306F2
+:104CE0000212025800000C860212025C0000030649
+:104CF00002120260000003060212026400000006B5
+:104D000002120268000000060212026C0000000697
+:104D10000212027000000006021202740000000677
+:104D200002120278000000060212027C0000000657
+:104D30000212028000000006021202840000000637
+:104D400002120288000000060212028C0000000617
+:104D500002120290000000060212029400000006F7
+:104D600002120298000000060212029C00000006D7
+:104D7000021202A000000306021202A400000013A7
+:104D8000021202A800000006021202B00000100485
+:104D9000021202B400001004021203240010644046
+:104DA0000212032800106440021205B40000000142
+:104DB000021201B0000000010600A0000000000C7B
+:104DC0000200A050000000000200A05400000000FB
+:104DD0000200A0EC555400000200A0F055555555B6
+:104DE0000200A0F4000055550200A0F8F0000000F9
+:104DF0000200A0FC555400000200A1005555555575
+:104E00000200A104000055550200A108F0000000B6
+:104E10000200A18C555400000200A1905555555533
+:104E20000200A194000055550200A198F000000076
+:104E30000200A19C000000000200A1A000010000EF
+:104E40000200A1A4000050140200A1A8000000006C
+:104E50000200A45C00000C000200A61C000000037D
+:104E60000200A06CFF5C00000200A070FFF55FFF75
+:104E70000200A0740000FFFF0200A078F00003E031
+:104E80000200A07C000000000200A0800000A00042
+:104E90000600A084000000050200A0980FE00000BA
+:104EA0000600A09C000000070200A0B8000004005B
+:104EB0000600A0BC000000030200A0C80000100013
+:104EC0000600A0CC000000030200A0D800004000B3
+:104ED0000600A0DC000000030200A0E800010000C2
+:104EE0000600A22C000000040200A10CFF5C0000E0
+:104EF0000200A110FFF55FFF0200A1140000FFFFF8
+:104F00000200A118F00003E00200A11C0000000054
+:104F10000200A1200000A0000600A124000000055E
+:104F20000200A1380FE000000600A13C00000007CD
+:104F30000200A158000008000600A15C0000000368
+:104F40000200A168000020000600A16C0000000320
+:104F50000200A178000080000600A17C0000000390
+:104F60000200A188000200000600A23C000000042C
+:104F70000200A030000000000200A0340000000089
+:104F80000200A038000000000200A03C0000000069
+:104F90000200A040000000000200A0440000000049
+:104FA0000200A048000000000200A04C0000000029
+:104FB00000000000000000000000003000000000C1
+:104FC00000000000000000000000000000000000E1
+:104FD00000000000000000000000000000000000D1
+:104FE0000000000000300031000000000000000060
+:104FF00000000000000000000000000000000000B1
+:1050000000000000000000000000000000000000A0
+:10501000003100520000000000000000000000000D
+:105020000000000000000000000000000000000080
+:105030000000000000000000000000000052008995
+:1050400000000000000000000089008D008D00912C
+:1050500000910095009500990099009D009D00A188
+:1050600000A100A500A500A900A900AE00AE00B1F6
+:1050700000B100B4000000000000000000000000CB
+:105080000000000000000000000000000000000020
+:105090000000000000B40309030903130313031DF8
+:1050A000031D03240324032B032B03320332033990
+:1050B00003390340034003470347034E034E0355A0
+:1050C00000000000000000000000000000000000E0
+:1050D00000000000000000000000000000000000D0
+:1050E00000000000000000000000000000000000C0
+:1050F00000000000000000000000000000000000B0
+:10510000000000000000000000000000000000009F
+:10511000000000000000000000000000000000008F
+:10512000000000000000000000000000000000007F
+:10513000000000000000000000000000000000006F
+:10514000000000000000000000000000000000005F
+:10515000000000000000000000000000000000004F
+:10516000000000000000000000000000000000003F
+:105170000355035B0000000000000000035B035CBC
+:10518000035C035D035D035E035E035F035F036017
+:1051900003600361036103620362036300000000B4
+:1051A00000000000000000000000000000000000FF
+:1051B00000000000000000000000000000000000EF
+:1051C00000000000000000000363036D036D037B1B
+:1051D000037B0389000000000000000000000000C5
+:1051E00000000000000000000000000000000000BF
+:1051F00000000000000000000000000000000000AF
+:10520000000000000000000000000000000000009E
+:10521000000000000000000000000000000000008E
+:105220000389038A00000000000000000000000065
+:10523000000000000000000000000000000000006E
+:10524000000000000000000000000000038A03D6F8
+:10525000000000000000000000000000000000004E
+:10526000000000000000000000000000000000003E
+:10527000000000000000000003D604010000000050
+:10528000000000000000000000000000000000001E
+:10529000000000000000000000000000000000000E
+:1052A00000000000040104330000000000000000C2
+:1052B0000433043A043A0441044104480448044FC6
+:1052C000044F04560456045D045D04640464046BD6
+:1052D000046B04A4000000000000000004A404A863
+:1052E00004A804AC04AC04B004B004B404B404B81E
+:1052F00004B804BC04BC04C004C004C404C4051342
+:105300000513052A052A05410541054305430545C1
+:1053100005450547054705490549054B054B054D1D
+:10532000054D054F054F0551055105E805E805E90F
+:1053300005E905EA05EA05EF05EF05F405F405F9C9
+:1053400005F905FE05FE0603060306080608060D18
+:10535000060D0612061206130000000000000000F1
+:10536000000000000000000000000000000000003D
+:10537000000000000000000000000000000000002D
+:1053800006130624000000000000000000000000DA
+:10539000000000000000000000000000000000000D
+:1053A0000000000000000000000000000624063994
+:1053B0000639063C063C063F0000000000000000E5
+:1053C00000000000000000000000000000000000DD
+:1053D0000000000000000000063F0675000000000D
+:1053E00000000000000000000000000000000000BD
+:1053F00000000000000000000000000000000000AD
+:1054000000000000067507780000000000000000A2
+:10541000000000000000000000000000000000008C
+:10542000000000000000000000000000000000007C
+:105430000778077F077F078307830787000000003F
+:10544000000000000000000000000000000000005C
+:10545000000000000000000000000000078707C8EF
+:10546000000000000000000007C807D107D107DADC
+:1054700007DA07E307E307EC07EC07F507F507FE94
+:1054800007FE080708070810081008670867087C67
+:10549000087C089108910894089408970897089A3E
+:1054A000089A089D089D08A008A008A308A308A6BC
+:1054B00008A608A908A908B2000000000000000022
+:1054C00000000000000000000000000000000000DC
+:1054D00000000000000000000000000000000000CC
+:1054E00008B208B800000000000000000000000042
+:1054F00000000000000000000000000000000000AC
+:1055000000000000000000000000000008B808BB18
+:10551000000000000000000000000000000000008B
+:10552000000000000000000000000000000000007B
+:10553000000000000000000008BB08C100000000DF
+:10554000000000000000000000000000000000005B
+:10555000000000000000000000000000000000004B
+:10556000000000000000000000000000000000003B
+:1055700008C108D008D008DF08DF08EE08EE08FDF3
+:1055800008FD090C090C091B091B092A092A0939FC
+:10559000093909AA00000000000000000000000016
+:1055A00000000000000000000000000000000000FB
+:1055B00000000000000000000000000009AA09BF70
+:1055C00009BF09D009D009E109E109E209E209E3CB
+:1055D00009E309E409E409E509E509E609E609E75B
+:1055E00009E709E809E809E90000000000000000F7
+:1055F00000000000000000000000000000000000AB
+:10560000000000000000000000000000000000009A
+:10561000000000000000000000000000000000008A
+:10562000000000000000000000000000000000007A
+:10563000000000000000000000000000000000006A
+:10564000000000000000000000000000000000005A
+:10565000000000000000000000000000000000004A
+:10566000000000000000000000000000000000003A
+:10567000000000000000000000000000000000002A
+:10568000000000000000000000000000000000001A
+:10569000000000000000000000000000000000000A
+:1056A00000000000000000000000000000000000FA
+:1056B00000000000000000000000000000000000EA
+:1056C000000000000000000000010000000204C013
+:1056D0000003098000040E4000051300000617C0F7
+:1056E00000071C800008214000092600000A2AC08B
+:1056F000000B2F80000C3440000D3900000E3DC01F
+:10570000000F42800010474000114C00001250C0B2
+:105710000013558000145A4000155F00001663C046
+:105720000017688000186D4000197200001A76C0DA
+:10573000001B7B80001C8040001D8500001E89C06E
+:10574000001F8E80000093400000200000004000F9
+:1057500000006000000080000000A0000000C00009
+:105760000000E000000100000001200000014000F6
+:1057700000016000000180000001A0000001C000E5
+:105780000001E000000200000002200000024000D2
+:1057900000026000000280000002A0000002C000C1
+:1057A0000002E000000300000003200000034000AE
+:1057B00000036000000380000003A0000003C0009D
+:1057C0000003E0000004000000042000000440008A
+:1057D00000046000000480000004A0000004C00079
+:1057E0000004E00000050000000520000005400066
+:1057F00000056000000580000005A0000005C00055
+:105800000005E00000060000000620000006400041
+:1058100000066000000680000006A0000006C00030
+:105820000006E0000007000000072000000740001D
+:1058300000076000000780000007A0000007C0000C
+:105840000007E000000800000008200000084000F9
+:1058500000086000000880000008A0000008C000E8
+:105860000008E000000900000009200000094000D5
+:1058700000096000000980000009A0000009C000C4
+:105880000009E000000A0000000A2000000A4000B1
+:10589000000A6000000A8000000AA000000AC000A0
+:1058A000000AE000000B0000000B2000000B40008D
+:1058B000000B6000000B8000000BA000000BC0007C
+:1058C000000BE000000C0000000C2000000C400069
+:1058D000000C6000000C8000000CA000000CC00058
+:1058E000000CE000000D0000000D2000000D400045
+:1058F000000D6000000D8000000DA000000DC00034
+:10590000000DE000000E0000000E2000000E400020
+:10591000000E6000000E8000000EA000000EC0000F
+:10592000000EE000000F0000000F2000000F4000FC
+:10593000000F6000000F8000000FA000000FC000EB
+:10594000000FE000001000000010200000104000D8
+:1059500000106000001080000010A0000010C000C7
+:105960000010E000001100000011200000114000B4
+:1059700000116000001180000011A0000011C000A3
+:105980000011E00000120000001220000012400090
+:1059900000126000001280000012A0000012C0007F
+:1059A0000012E0000013000000132000001340006C
+:1059B00000136000001380000013A0000013C0005B
+:1059C0000013E00000140000001420000014400048
+:1059D00000146000001480000014A0000014C00037
+:1059E0000014E00000150000001520000015400024
+:1059F00000156000001580000015A0000015C00013
+:105A00000015E000001600000016200000164000FF
+:105A100000166000001680000016A0000016C000EE
+:105A20000016E000001700000017200000174000DB
+:105A300000176000001780000017A0000017C000CA
+:105A40000017E000001800000018200000184000B7
+:105A500000186000001880000018A0000018C000A6
+:105A60000018E00000190000001920000019400093
+:105A700000196000001980000019A0000019C00082
+:105A80000019E000001A0000001A2000001A40006F
+:105A9000001A6000001A8000001AA000001AC0005E
+:105AA000001AE000001B0000001B2000001B40004B
+:105AB000001B6000001B8000001BA000001BC0003A
+:105AC000001BE000001C0000001C2000001C400027
+:105AD000001C6000001C8000001CA000001CC00016
+:105AE000001CE000001D0000001D2000001D400003
+:105AF000001D6000001D8000001DA000001DC000F2
+:105B0000001DE000001E0000001E2000001E4000DE
+:105B1000001E6000001E8000001EA000001EC000CD
+:105B2000001EE000001F0000001F2000001F4000BA
+:105B3000001F6000001F8000001FA000001FC000A9
+:105B4000001FE00000200000002020000020400096
+:105B500000206000002080000020A0000020C00085
+:105B60000020E00000210000002120000021400072
+:105B700000216000002180000021A0000021C00061
+:105B80000021E0000022000000222000002240004E
+:105B900000226000002280000022A0000022C0003D
+:105BA0000022E0000023000000232000002340002A
+:105BB00000236000002380000023A0000023C00019
+:105BC0000023E00000240000002420000024400006
+:105BD00000246000002480000024A0000024C000F5
+:105BE0000024E000002500000025200000254000E2
+:105BF00000256000002580000025A0000025C000D1
+:105C00000025E000002600000026200000264000BD
+:105C100000266000002680000026A0000026C000AC
+:105C20000026E00000270000002720000027400099
+:105C300000276000002780000027A0000027C00088
+:105C40000027E00000280000002820000028400075
+:105C500000286000002880000028A0000028C00064
+:105C60000028E00000290000002920000029400051
+:105C700000296000002980000029A0000029C00040
+:105C80000029E000002A0000002A2000002A40002D
+:105C9000002A6000002A8000002AA000002AC0001C
+:105CA000002AE000002B0000002B2000002B400009
+:105CB000002B6000002B8000002BA000002BC000F8
+:105CC000002BE000002C0000002C2000002C4000E5
+:105CD000002C6000002C8000002CA000002CC000D4
+:105CE000002CE000002D0000002D2000002D4000C1
+:105CF000002D6000002D8000002DA000002DC000B0
+:105D0000002DE000002E0000002E2000002E40009C
+:105D1000002E6000002E8000002EA000002EC0008B
+:105D2000002EE000002F0000002F2000002F400078
+:105D3000002F6000002F8000002FA000002FC00067
+:105D4000002FE00000300000003020000030400054
+:105D500000306000003080000030A0000030C00043
+:105D60000030E00000310000003120000031400030
+:105D700000316000003180000031A0000031C0001F
+:105D80000031E0000032000000322000003240000C
+:105D900000326000003280000032A0000032C000FB
+:105DA0000032E000003300000033200000334000E8
+:105DB00000336000003380000033A0000033C000D7
+:105DC0000033E000003400000034200000344000C4
+:105DD00000346000003480000034A0000034C000B3
+:105DE0000034E000003500000035200000354000A0
+:105DF00000356000003580000035A0000035C0008F
+:105E00000035E0000036000000362000003640007B
+:105E100000366000003680000036A0000036C0006A
+:105E20000036E00000370000003720000037400057
+:105E300000376000003780000037A0000037C00046
+:105E40000037E00000380000003820000038400033
+:105E500000386000003880000038A0000038C00022
+:105E60000038E0000039000000392000003940000F
+:105E700000396000003980000039A0000039C000FE
+:105E80000039E000003A0000003A2000003A4000EB
+:105E9000003A6000003A8000003AA000003AC000DA
+:105EA000003AE000003B0000003B2000003B4000C7
+:105EB000003B6000003B8000003BA000003BC000B6
+:105EC000003BE000003C0000003C2000003C4000A3
+:105ED000003C6000003C8000003CA000003CC00092
+:105EE000003CE000003D0000003D2000003D40007F
+:105EF000003D6000003D8000003DA000003DC0006E
+:105F0000003DE000003E0000003E2000003E40005A
+:105F1000003E6000003E8000003EA000003EC00049
+:105F2000003EE000003F0000003F2000003F400036
+:105F3000003F6000003F8000003FA000003FC00025
+:105F4000003FE000003FE00100000000000001FF12
+:105F50000000020000007FF800007FF80000014010
+:105F600000003500000000010000FF0000000000FC
+:105F70000000FF00000000000000FF000000000023
+:105F80000000FF00000000000000FF000000000013
+:105F90000000FF00000000000000FF000000000003
+:105FA0000000FF000000000000000000140AFF00D5
+:105FB00000000001000000000020100100000000AF
+:105FC0000100900000000100000090020000900419
+:105FD00000009006000090080000900A0000900C5D
+:105FE0000000900E0000901000009012000090142D
+:105FF00000009016000090180000901A0000901CFD
+:106000000000901E000090200000902200009024CC
+:1060100000009026000090280000902A0000902C9C
+:106020000000902E0000903000009032000090346C
+:1060300000009036000090380000903A0000903C3C
+:106040000000903E0000904000009042000090440C
+:1060500000009046000090480000904A0000904CDC
+:106060000000904E000090500000905200009054AC
+:1060700000009056000090580000905A0000905C7C
+:106080000000905E0000906000009062000090644C
+:1060900000009066000090680000906A0000906C1C
+:1060A0000000906E000090700000907200009074EC
+:1060B00000009076000090780000907A0000907CBC
+:1060C0000000907E0000908000009082000090848C
+:1060D00000009086000090880000908A0000908C5C
+:1060E0000000908E0000909000009092000090942C
+:1060F00000009096000090980000909A0000909CFC
+:106100000000909E000090A0000090A2000090A4CB
+:10611000000090A6000090A8000090AA000090AC9B
+:10612000000090AE000090B0000090B2000090B46B
+:10613000000090B6000090B8000090BA000090BC3B
+:10614000000090BE000090C0000090C2000090C40B
+:10615000000090C6000090C8000090CA000090CCDB
+:10616000000090CE000090D0000090D2000090D4AB
+:10617000000090D6000090D8000090DA000090DC7B
+:10618000000090DE000090E0000090E2000090E44B
+:10619000000090E6000090E8000090EA000090EC1B
+:1061A000000090EE000090F0000090F2000090F4EB
+:1061B000000090F6000090F8000090FA000090FCBB
+:1061C000000090FE00009100000091020000910488
+:1061D00000009106000091080000910A0000910C57
+:1061E0000000910E00009110000091120000911427
+:1061F00000009116000091180000911A0000911CF7
+:106200000000911E000091200000912200009124C6
+:1062100000009126000091280000912A0000912C96
+:106220000000912E00009130000091320000913466
+:1062300000009136000091380000913A0000913C36
+:106240000000913E00009140000091420000914406
+:1062500000009146000091480000914A0000914CD6
+:106260000000914E000091500000915200009154A6
+:1062700000009156000091580000915A0000915C76
+:106280000000915E00009160000091620000916446
+:1062900000009166000091680000916A0000916C16
+:1062A0000000916E000091700000917200009174E6
+:1062B00000009176000091780000917A0000917CB6
+:1062C0000000917E00009180000091820000918486
+:1062D00000009186000091880000918A0000918C56
+:1062E0000000918E00009190000091920000919426
+:1062F00000009196000091980000919A0000919CF6
+:106300000000919E000091A0000091A2000091A4C5
+:10631000000091A6000091A8000091AA000091AC95
+:10632000000091AE000091B0000091B2000091B465
+:10633000000091B6000091B8000091BA000091BC35
+:10634000000091BE000091C0000091C2000091C405
+:10635000000091C6000091C8000091CA000091CCD5
+:10636000000091CE000091D0000091D2000091D4A5
+:10637000000091D6000091D8000091DA000091DC75
+:10638000000091DE000091E0000091E2000091E445
+:10639000000091E6000091E8000091EA000091EC15
+:1063A000000091EE000091F0000091F2000091F4E5
+:1063B000000091F6000091F8000091FA000091FCB5
+:1063C000000091FEFFFFFFFFFFFFFFFFFFFFFFFF4A
+:1063D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFCD
+:1063E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFBD
+:1063F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFAD
+:10640000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF9C
+:10641000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF8C
+:10642000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7C
+:10643000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF6C
+:10644000FFFFFFFF0000000300BEBC2000000000B3
+:10645000000000050000000300BEBC20000000009A
+:10646000000000050000000300BEBC20000000008A
+:10647000000000050000000300BEBC20000000007A
+:10648000000000050000000300BEBC20000000006A
+:10649000000000050000000300BEBC20000000005A
+:1064A000000000050000000300BEBC20000000004A
+:1064B000000000050000000300BEBC20000000003A
+:1064C0000000000500002000000040C000006180C6
+:1064D000000082400000A3000000C3C00000E48070
+:1064E0000001054000012600000146C00001678050
+:1064F000000188400001A9000001C9C00001EA8034
+:1065000000020B4000022C0000024CC000026D8013
+:1065100000028E400002AF000002CFC00002F080F7
+:10652000000011400000800000010380000187008E
+:1065300000020A8000028E00000311800003950013
+:106540000004188000049C0000051F800005A300C3
+:10655000000626800006AA0000072D800007B10073
+:10656000000834800008B80000093B800009BF0023
+:10657000000A4280000AC600000B4980000BCD00D3
+:10658000000C5080000CD400000D578000005B0010
+:1065900000007FF800007FF8000000D50000150023
+:1065A0000000FF00000000000000FF0000000000ED
+:1065B0000000FF00000000000000FF0000000000DD
+:1065C0000000FF00000000000000FF0000000000CD
+:1065D0000000FF00000000000000FF0000000000BD
+:1065E000000019000000000000000000FFFFFFFF96
+:1065F0000000000003938700000000000393870061
+:1066000000007FF800007FF80000068E00003500D3
+:106610000000FF000FFFFFFF0000FF000FFFFFFF64
+:10662000000000FF0000FF000FFFFFFF0000FF0061
+:106630000FFFFFFF000000FF0000FF000FFFFFFF44
+:106640000000FF000FFFFFFF000000FF0000FF0041
+:106650000FFFFFFF0000FF000FFFFFFF000000FF24
+:106660000000FF000FFFFFFF0000FF000FFFFFFF14
+:10667000000000FF0000FF000FFFFFFF0000FF0011
+:106680000FFFFFFF000000FF0000FF000FFFFFFFF4
+:106690000000FF000FFFFFFF000000FF0000FF00F1
+:1066A0000FFFFFFF0000FF000FFFFFFF000000FFD4
+:1066B0000000FF000FFFFFFF0000FF000FFFFFFFC4
+:1066C000000000FF0000FF000FFFFFFF0000FF00C1
+:1066D0000FFFFFFF000000FF0000FF000FFFFFFFA4
+:1066E0000000FF000FFFFFFF000000FF0000FF00A1
+:1066F0000FFFFFFF0000FF000FFFFFFF000000FF84
+:106700000000FF000FFFFFFF0000FF000FFFFFFF73
+:10671000000000FF0000FF000FFFFFFF0000FF0070
+:106720000FFFFFFF000000FF0000FF000FFFFFFF53
+:106730000000FF000FFFFFFF000000FF0000FF0050
+:106740000FFFFFFF0000FF000FFFFFFF000000FF33
+:106750000000FF000FFFFFFF0000FF000FFFFFFF23
+:10676000000000FF0000FF000FFFFFFF0000FF0020
+:106770000FFFFFFF000000FF0000FF000FFFFFFF03
+:106780000000FF000FFFFFFF000000FF0000FF0000
+:106790000FFFFFFF0000FF000FFFFFFF000000FFE3
+:1067A0000000FF000FFFFFFF0000FF000FFFFFFFD3
+:1067B000000000FF0000FF000FFFFFFF0000FF00D0
+:1067C0000FFFFFFF000000FF0000FF000FFFFFFFB3
+:1067D0000000FF000FFFFFFF000000FF0000FF00B0
+:1067E0000FFFFFFF0000FF000FFFFFFF000000FF93
+:1067F0000000FF000FFFFFFF0000FF000FFFFFFF83
+:10680000000000FF0000FF000FFFFFFF0000FF007F
+:106810000FFFFFFF000000FF0000FF000FFFFFFF62
+:106820000000FF000FFFFFFF000000FF0000FF005F
+:106830000FFFFFFF0000FF000FFFFFFF000000FF42
+:106840000000FF000FFFFFFF0000FF000FFFFFFF32
+:10685000000000FF0000FF000FFFFFFF0000FF002F
+:106860000FFFFFFF000000FF0000FF000FFFFFFF12
+:106870000000FF000FFFFFFF000000FF0000FF000F
+:106880000FFFFFFF0000FF000FFFFFFF000000FFF2
+:10689000000000FF000000FF000000FF000000FFFC
+:1068A000000000FF000000FF000000FF000000FFEC
+:1068B0000000FF00000000000000FF0000000000DA
+:1068C0000000FF00000000000000FF0000000000CA
+:1068D0000000FF00000000000000FF0000000000BA
+:1068E0000000FF00000000000000FF0000000000AA
+:1068F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA8
+:10690000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF97
+:10691000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF87
+:10692000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF77
+:10693000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF67
+:10694000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF57
+:10695000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF47
+:10696000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
+:106970000000100000002080000031000000418075
+:10698000000052000000628000007300000083805D
+:10699000000094000000A4800000B5000000C58045
+:1069A0000000D6000000E6800000F700000107802C
+:1069B0000001180000012880000139000001498011
+:1069C00000015A0000016A8000017B0000018B80F9
+:1069D00000019C000001AC800001BD000001CD80E1
+:1069E0000001DE000001EE800001FF0000000F80CA
+:1069F00000007FF800007FF800000344000035002D
+:106A000010000000000028AD000100010005020692
+:106A1000CCCCCCC5FFFFFFFFFFFFFFFF7058103C41
+:106A20000000FF00000000000000FF000000000068
+:106A30000000FF00000000000000FF000000000058
+:106A40000000FF00000000000000FF000000000048
+:106A50000000FF00000000000000FF000000000038
+:106A60000000000000000001CCCC0201CCCCCCCC5A
+:106A7000CCCC0201CCCCCCCCCCCC0201CCCCCCCC80
+:106A8000CCCC0201CCCCCCCCCCCC0201CCCCCCCC70
+:106A9000CCCC0201CCCCCCCCCCCC0201CCCCCCCC60
+:106AA000CCCC0201CCCCCCCC00000000FFFFFFFF1F
+:106AB000000E0000011600D6002625A0002625A005
+:106AC000002625A0002625A000720000012300F367
+:106AD000002625A0002625A0002625A0002625A00A
+:106AE0000000FFFF000000000000FFFF00000000AA
+:106AF0000000FFFF000000000000FFFF000000009A
+:106B00000000FFFF000000000000FFFF0000000089
+:106B10000000FFFF000000000000FFFF0000000079
+:106B20000000FFFF000000000000FFFF0000000069
+:106B30000000FFFF000000000000FFFF0000000059
+:106B40000000FFFF000000000000FFFF0000000049
+:106B50000000FFFF000000000000FFFF0000000039
+:106B60000000FFFF000000000000FFFF0000000029
+:106B70000000FFFF000000000000FFFF0000000019
+:106B80000000FFFF000000000000FFFF0000000009
+:106B90000000FFFF000000000000FFFF00000000F9
+:106BA0000000FFFF000000000000FFFF00000000E9
+:106BB0000000FFFF000000000000FFFF00000000D9
+:106BC0000000FFFF000000000000FFFF00000000C9
+:106BD0000000FFFF000000000000FFFF00000000B9
+:106BE0000000FFFF000000000000FFFF00000000A9
+:106BF0000000FFFF000000000000FFFF0000000099
+:106C00000000FFFF000000000000FFFF0000000088
+:106C10000000FFFF000000000000FFFF0000000078
+:106C20000000FFFF000000000000FFFF0000000068
+:106C30000000FFFF000000000000FFFF0000000058
+:106C40000000FFFF000000000000FFFF0000000048
+:106C50000000FFFF000000000000FFFF0000000038
+:106C60000000FFFF000000000000FFFF0000000028
+:106C70000000FFFF000000000000FFFF0000000018
+:106C80000000FFFF000000000000FFFF0000000008
+:106C90000000FFFF000000000000FFFF00000000F8
+:106CA0000000FFFF000000000000FFFF00000000E8
+:106CB0000000FFFF000000000000FFFF00000000D8
+:106CC0000000FFFF000000000000FFFF00000000C8
+:106CD0000000FFFF000000000000FFFF00000000B8
+:106CE000FFFFFFF3318FFFFF0C30C30CC30C30C329
+:106CF000CF3CF300F3CF3CF30000CF3CCDCDCDCD66
+:106D0000FFFFFFF130EFFFFF0C30C30CC30C30C3AB
+:106D1000CF3CF300F3CF3CF30001CF3CCDCDCDCD44
+:106D2000FFFFFFF6305FFFFF0C30C30CC30C30C316
+:106D3000CF3CF300F3CF3CF30002CF3CCDCDCDCD23
+:106D4000FFFFF4061CBFFFFF0C30C305C30C30C3AC
+:106D5000CF300014F3CF3CF30004CF3CCDCDCDCDEC
+:106D6000FFFFFFF2304FFFFF0C30C30CC30C30C3EA
+:106D7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDD
+:106D8000FFFFFFFA302FFFFF0C30C30CC30C30C3E2
+:106D9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB5
+:106DA000FFFFFFF731EFFFFF0C30C30CC30C30C304
+:106DB000CF3CF300F3CF3CF30020CF3CCDCDCDCD85
+:106DC000FFFFFFF5302FFFFF0C30C30CC30C30C3A7
+:106DD000CF3CF300F3CF3CF30040CF3CCDCDCDCD45
+:106DE000FFFFFFF3318FFFFF0C30C30CC30C30C328
+:106DF000CF3CF300F3CF3CF30000CF3CCDCDCDCD65
+:106E0000FFFFFFF1310FFFFF0C30C30CC30C30C389
+:106E1000CF3CF300F3CF3CF30001CF3CCDCDCDCD43
+:106E2000FFFFFFF6305FFFFF0C30C30CC30C30C315
+:106E3000CF3CF300F3CF3CF30002CF3CCDCDCDCD22
+:106E4000FFFFF4061CBFFFFF0C30C305C30C30C3AB
+:106E5000CF300014F3CF3CF30004CF3CCDCDCDCDEB
+:106E6000FFFFFFF2304FFFFF0C30C30CC30C30C3E9
+:106E7000CF3CF300F3CF3CF30008CF3CCDCDCDCDDC
+:106E8000FFFFFFFA302FFFFF0C30C30CC30C30C3E1
+:106E9000CF3CF300F3CF3CF30010CF3CCDCDCDCDB4
+:106EA000FFFFFFF730EFFFFF0C30C30CC30C30C304
+:106EB000CF3CF300F3CF3CF30020CF3CCDCDCDCD84
+:106EC000FFFFFFF5304FFFFF0C30C30CC30C30C386
+:106ED000CF3CF300F3CF3CF30040CF3CCDCDCDCD44
+:106EE000FFFFFFFF30CFFFFF0C30C30CC30C30C3DC
+:106EF000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD98
+:106F0000FFFFFFFF30CFFFFF0C30C30CC30C30C3BB
+:106F1000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD76
+:106F2000FFFFFFFF30CFFFFF0C30C30CC30C30C39B
+:106F3000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD55
+:106F4000FFFFFFFF30CFFFFF0C30C30CC30C30C37B
+:106F5000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD33
+:106F6000FFFFFFFF30CFFFFF0C30C30CC30C30C35B
+:106F7000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0F
+:106F8000FFFFFFFF30CFFFFF0C30C30CC30C30C33B
+:106F9000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE7
+:106FA000FFFFFFFF30CFFFFF0C30C30CC30C30C31B
+:106FB000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB7
+:106FC000FFFFFFFF30CFFFFF0C30C30CC30C30C3FB
+:106FD000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD77
+:106FE000FFFFFFF3320FFFFF0C30C30CC30C30C3A5
+:106FF000CF3CF300F3CF3CF30000CF3CCDCDCDCD63
+:10700000FFFFFFF1310FFFFF0C30C30CC30C30C387
+:10701000CF3CF300F3CF3CF30001CF3CCDCDCDCD41
+:10702000FFFFFFF6305FFFFF0C30C30CC30C30C313
+:10703000CF3CF300F3CF3CF30002CF3CCDCDCDCD20
+:10704000FFFFF4061CBFFFFF0C30C305C30C30C3A9
+:10705000CF300014F3CF3CF30004CF3CCDCDCDCDE9
+:10706000FFFFFFF2304FFFFF0C30C30CC30C30C3E7
+:10707000CF3CF300F3CF3CF30008CF3CCDCDCDCDDA
+:10708000FFFFFF8A042FFFFF0C30C30CC30C30C37B
+:10709000CF3CC000F3CF3CF30010CF3CCDCDCDCDE5
+:1070A000FFFFFF9705CFFFFF0C30C30CC30C30C3AD
+:1070B000CF3CC000F3CF3CF30020CF3CCDCDCDCDB5
+:1070C000FFFFFFF5310FFFFF0C30C30CC30C30C3C3
+:1070D000CF3CF300F3CF3CF30040CF3CCDCDCDCD42
+:1070E000FFFFFFF3320FFFFF0C30C30CC30C30C3A4
+:1070F000CF3CF300F3CF3CF30000CF3CCDCDCDCD62
+:10710000FFFFFFF1302FFFFF0C30C30CC30C30C367
+:10711000CF3CF300F3CF3CF30001CF3CCDCDCDCD40
+:10712000FFFFFFF6305FFFFF0C30C30CC30C30C312
+:10713000CF3CF300F3CF3CF30002CF3CCDCDCDCD1F
+:10714000FFFFFF061CBFFFFF0C30C30CC30C30C396
+:10715000CF3CC014F3CF3CF30004CF3CCDCDCDCD1C
+:10716000FFFFFFF2304FFFFF0C30C30CC30C30C3E6
+:10717000CF3CF300F3CF3CF30008CF3CCDCDCDCDD9
+:10718000FFFFFFFA302FFFFF0C30C30CC30C30C3DE
+:10719000CF3CF300F3CF3CF30010CF3CCDCDCDCDB1
+:1071A000FFFFFFF731CFFFFF0C30C30CC30C30C320
+:1071B000CF3CF300F3CF3CF30020CF3CCDCDCDCD81
+:1071C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F9
+:1071D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD75
+:1071E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D9
+:1071F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD95
+:10720000FFFFFFFF30CFFFFF0C30C30CC30C30C3B8
+:10721000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD73
+:10722000FFFFFFFF30CFFFFF0C30C30CC30C30C398
+:10723000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD52
+:10724000FFFFFFFF30CFFFFF0C30C30CC30C30C378
+:10725000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD30
+:10726000FFFFFFFF30CFFFFF0C30C30CC30C30C358
+:10727000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0C
+:10728000FFFFFFFF30CFFFFF0C30C30CC30C30C338
+:10729000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE4
+:1072A000FFFFFFFF30CFFFFF0C30C30CC30C30C318
+:1072B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB4
+:1072C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F8
+:1072D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD74
+:1072E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D8
+:1072F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD94
+:10730000FFFFFFFF30CFFFFF0C30C30CC30C30C3B7
+:10731000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD72
+:10732000FFFFFFFF30CFFFFF0C30C30CC30C30C397
+:10733000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD51
+:10734000FFFFFFFF30CFFFFF0C30C30CC30C30C377
+:10735000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2F
+:10736000FFFFFFFF30CFFFFF0C30C30CC30C30C357
+:10737000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0B
+:10738000FFFFFFFF30CFFFFF0C30C30CC30C30C337
+:10739000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE3
+:1073A000FFFFFFFF30CFFFFF0C30C30CC30C30C317
+:1073B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB3
+:1073C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F7
+:1073D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD73
+:1073E000FFFFFFFF30CFFFFF0C30C30CC30C30C3D7
+:1073F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD93
+:10740000FFFFFFFF30CFFFFF0C30C30CC30C30C3B6
+:10741000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD71
+:10742000FFFFFFFF30CFFFFF0C30C30CC30C30C396
+:10743000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD50
+:10744000FFFFFFFF30CFFFFF0C30C30CC30C30C376
+:10745000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2E
+:10746000FFFFFFFF30CFFFFF0C30C30CC30C30C356
+:10747000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD0A
+:10748000FFFFFFFF30CFFFFF0C30C30CC30C30C336
+:10749000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDE2
+:1074A000FFFFFFFF30CFFFFF0C30C30CC30C30C316
+:1074B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDB2
+:1074C000FFFFFFFF30CFFFFF0C30C30CC30C30C3F6
+:1074D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD72
+:1074E000000C0000000700C000028130000B815832
+:1074F0000002021000010230000F024000010330C0
+:10750000000C0000000800C000028140000B8168F0
+:10751000000202200001024000070250000202C0E7
+:10752000001000000008010000028180000B81A80B
+:107530000002026000018280000E82980008038031
+:107540000010000000010100000281100009013854
+:10755000000201C8000101E8000E01F8000002D895
+:10756000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC5B
+:1075700000002000CCCCCCCCCCCCCCCCCCCCCCCC5B
+:10758000CCCCCCCC00002000CCCCCCCCCCCCCCCC4B
+:10759000CCCCCCCCCCCCCCCC040020000000000067
+:1075A0001F8B080000000000000BFB51CFC0F00350
+:1075B0008AB7B13130ECE644F0E98159181818F86F
+:1075C00099C8D7BF1168C04E20BE01C4075948D71B
+:1075D0007F551AC15E26C9C0700A8827883330B427
+:1075E0004A21C4ED651818EE01F92BA16272403DE5
+:1075F00073A4C977F3281E3CB8D014951F620CA160
+:107600005F9840E82234F950A8BCB81E842E36C5D5
+:107610006EAE841E71F6A7A9A0F2BD55F0ABCFD512
+:1076200040E5C7A2A90F81F2017EE9B234D8030078
+:1076300000000000000000001F8B08000000000098
+:10764000000BED7D0B7455D5B5E8DA9FB3CFFF6421
+:10765000278470123EEEC400C1063C4280A0A83BC5
+:10766000FC1A7DD41E1025E5A11C446B004922A6FE
+:10767000D78C96D76CC8870450E3E751BD457BA0F3
+:10768000D88B0E5BA3A68ABDB43D887AA9C3DB2242
+:107690005AA52D7A83FA2C58A0B1572ABD4FCB5B3F
+:1076A00073AEB592BD77CEC9C74F47EF788D43769D
+:1076B000D6DEEB3BFF6BCEB95634D943F22E27E42E
+:1076C0001CFCD0A7291142A6F73DC92D5932C92368
+:1076D000E41B3E823F1FF923534816210D3EF6BCA2
+:1076E0003D10D905CF2D8D84A426C2F771491221F2
+:1076F000244848899A0B2D02B1870BE15977617CA8
+:10770000323E67C23387C8848C84F218FDBD20EBFB
+:10771000FB9C42FF399AA880F114F68AA8A43C96F3
+:10772000C2F6DF226446DF3C48DD57F578B86FDEED
+:10773000EEA7A26B24C5EB9E837F94E5598950E6A2
+:10774000FA0D47A5C79FB7D51F4FC2B9382F95A8C7
+:10775000382FDE9E108BD8E7E7EEE7A346F2F8F36A
+:10776000E3FBC32DD3B8026E6D8D3E7CB636EA24A2
+:10777000E5258436333B4BE93344CC5DA5FDDBCDB9
+:107780002312871F9F0F8C63D0FAF47F42E1DE9CA7
+:107790004B9241C0214938E0D61C5AEC33D3F42730
+:1077A0009E2497C2AD84CFB9A8FF7AFD302F0A0777
+:1077B0003FCC2B0D3C97C2BCA6F79F97BFD83DAFDF
+:1077C0006A6287CF70E7159844C821C0876A128221
+:1077D00078B9CDD19FAC9B56779AFE08A70BD5E020
+:1077E000EB1B229E822572DFF8000723E0A02F6F9B
+:1077F00034C7496F6EBA067820BE3A387CE20AE395
+:1078000007AB0F8FF4199A1D93803568F110E02DA6
+:107810009F30F8E557B7DE2A4F2194D53A0F4EA096
+:10782000F0CBEF5EB99040F9E8152780DF9ACBA640
+:1078300056CEA5F5B2CB63AF2CA04D423143027AB0
+:10784000DD0A9D15407F5FB32A68B909FAA365CBAD
+:10785000BACAB4106EA6036E1472864ACB1EF8B56F
+:10786000280DFC482F1EA473DEFEED33C1CF436C00
+:10787000F8437E5EEFA0CB8C78BF91E1CBA2FF01F5
+:10788000BE46101B5FD37EB22B35075EB25CE33C75
+:107890000ABF20BC6FFD9B8C97439EF41994CE3D8C
+:1078A000A5B29EA478CA26B16CB58CE263A14A4009
+:1078B0008EE5E4EA1290C360786926A412F89F4A24
+:1078C00007B2C826E77ECEF9AB60CDEE9DAD749CC5
+:1078D00033B34331A895AFD3B94EEDBF9E3B40BE05
+:1078E000786DE5B2E74802C7EB3C5844E76595C9B7
+:1078F000B18729DD6C2D3DACDBE5E3B15EF9E2A695
+:107900000F62A833B83CA0F0514A65D31FF9ECF4DC
+:10791000A17C4AFA08DFE8C4C770F1757A98F4F1DF
+:1079200059C71378EDCF571B055E7D847EDF52B2B9
+:1079300078407DD51FAF4F92046D172A2566324DD2
+:10794000BBFFB4EB0BF7D326DFDD72541935A36A06
+:10795000E74078CB75AE57F4EB6F508C7747D0A2E9
+:10796000AAA37CD5B81E688FDE63114A776740F6FC
+:107970005078281D17A5A04C8A49EC61D64D4AA223
+:10798000657FD44C6E413A48225EC4FCBC86EC90C4
+:10799000B36AAE530E932A4BB2CFDFDFA0E13C3483
+:1079A000182F17EC02DA2105851A2229A05B41AFB6
+:1079B000A092CE9D0F65A79DD1664C25E9F0A072DF
+:1079C000BC4B92A0D76F0D4DBEB8C75BE29CEF9049
+:1079D000DB8554E33DD1268D9CEE6BA792F7047EA8
+:1079E00028102F13761DC7D3660FD92B5D48E5C12C
+:1079F000986BC152209BE1D32C6A87C0932A9FCDFC
+:107A000063A6EA4057648FA4C23C71488A4742F596
+:107A10001DD40B4A06F623FBEA90FE9490894FF1A1
+:107A20003DF3BCD8F8BD655FA206F0531DD58C2D83
+:107A3000748E6B15D3D80874318DC9A7EAE88479A0
+:107A4000A0EF3C129BD7B7A57C5C879AD39687762C
+:107A50005906FBAE5AA52A7F2A7CDF3661207E229A
+:107A6000494F4FB70D9E6E7BF06689DA835FA2BFE8
+:107A7000CC2433018E7F8A2DCE4A0D80AFF71B0FA9
+:107A8000EAEAF83E7BD0FD7DAD42EAD2C98156C913
+:107A9000C7F8D26769601F8875AF0576A720DD1625
+:107AA000DBC4D69B9B8BF05DBBE717BA6AE3BFB51F
+:107AB00054CD78A7F65F8F80B7E8A7B77DF2A0A373
+:107AC000BDBB5D6F7F425E507B18E85CD041504A81
+:107AD0006C95E87B6F6CB105EA6CED63150CFF19D2
+:107AE000E6DF8BAF4F397FD16E30BAFAD3EEA656B0
+:107AF000D04FEF691D575D4CE9E8F74F28B14DF4C1
+:107B00006BF58E89F3C05E7A8FD3B7C0D389DD4D14
+:107B100079E9E823139E7E21F9711C415FD5F2F2C9
+:107B200001E96130FA7ACA4D5F9D577F21F475C82B
+:107B30004D5F1C1E273BD9FAC9FD23185E38BEDCF9
+:107B4000F8C988974FDBAE3F3DFD5AA27CEDEDBCF6
+:107B50003A3D3DF1F90A7C7DD6F90E4647798669B2
+:107B6000EA74FC51D48E91407F9491588ACE53A7E9
+:107B70000FD45B31A6B7845C12ED4F4BCC4E53C98A
+:107B80006BD85E21294B477BDB6967CC57E84BDA22
+:107B90004F7309497A715F64FA504F95A884E93FA1
+:107BA00033943F03EC08FEA3CC8EC1BAB3C0FE07EA
+:107BB000FD359BEB5F89DA5B747DA132E7BE37E070
+:107BC000B23F14BE5FE8676F0D737FEC97F9FE3824
+:107BD0004842A88FC4FE38037FF6EE8B395C476AB3
+:107BE000C494E9BAB5839EE42609B41B41FD4C8ECA
+:107BF0004A49E62F20256037AF970A62A00FE83E7A
+:107C0000AF278B7E7FEF070AEA878668DD8A1658E2
+:107C1000F6B50D13BBE9B8F7349269C59EBEF1EE17
+:107C2000513B7C00EFF6E2F50EBBF6BB52A250B61C
+:107C3000E91D7F549B563C0D8653DFEEA6F090293C
+:107C40002081FF02A1FBA22F18003FF6BE174EF6BF
+:107C5000B2D2BF9C0B364F011653B02F6DA7B63B67
+:107C6000B9188AA3A50A4A07ED1EFEDDFA4D05ECF8
+:107C700077DBFDACBC63D3AC8D169447F2FA561596
+:107C8000FB9ECFCAB76DFA4105EC0BDAB2E99AA9AF
+:107C9000BE6EF324ABE269F8FB365976D85F4DC669
+:107CA00082F2FF43D7E1F79917BD40E1498112B352
+:107CB0000CD26B97150ABF41C7DD952500FFD7147D
+:107CC00002F4EC3762F19B0CA43FA47B7FAE19DB7E
+:107CD000424B0DF4850CF528DE1E96605FC7EC3133
+:107CE000F0E79C43FAA57C41BFAFCFD6B13ED16D42
+:107CF000F659519F3DD68B2717DEEE557BFC80B79A
+:107D0000EF8DF9F01713693FD642390664F3BD0DC4
+:107D100045D92B6D787CCC37A70AF0489A73D12EC1
+:107D20008992DE1F13CA62DF5C403A2BC0781C4385
+:107D3000251FA1743A2EDE53012830AAF4E7708F74
+:107D40004BE6E9EFA15DA548E7BE34743BCA0D07D9
+:107D5000DAE3A845543E8D90483C9DDC5DA9E6A041
+:107D60003C185149D73B809FE09B549F30FB2CE14E
+:107D700003FF56A67132CDF333C073934CC71D4D2C
+:107D80009208A7C1E09A099EADD127B3515E7FCE7C
+:107D900070CDD4DE0DCF1112E397956A39F2CB5036
+:107DA000FD3B6D7C3FD5027E38FA6CE27E38777BF6
+:107DB000BFDA416269F0EB379CFE210DF625B67201
+:107DC000BD6C307D1072FB89189EDD7A6101D70B86
+:107DD0002D51AA17983C5C087A20C8E1DF02BB7ECF
+:107DE000909F6192B4E8F720F707915226FF7DF447
+:107DF0003FE0B751554E7DA00D511FBC2BC55F9084
+:107E0000910E8904F3BB5FEAB86202D04F3EB3C75C
+:107E1000A337B445133638D4CB4CDF097D962C16E6
+:107E2000FA8C20FCCEE37348920E3FE8C307362C51
+:107E3000CE42BFDD8D41871C8AB62EC6FDAF8D9E1A
+:107E4000D12FDAC1FDA399F0A76BC9443A7958A89C
+:107E5000307918317B52E0F34342CEE32E434ED6C5
+:107E60000CFEC4B10F8B4CED39783E5DEFCE8BE448
+:107E7000D826DA4E9DADA63C14BE6AF98B55127D0C
+:107E8000EE2C64F0B76611A4D390B1E08402FA58E6
+:107E9000ED467F4DA8D2BD2FB69515E8A7E77AD459
+:107EA000DF763FF500FBB8A13E9B28BCDEB6F13F74
+:107EB000855C4AA1EB50371003EC09D5A4223102AE
+:107EC0004F3D0FE8453563217C765754C2F3BCD94A
+:107ED000F14AD9A6075433BE05EA8FF8CA7DEDB042
+:107EE0005EF526595624C6073936789B4AA1633F6A
+:107EF00097ADBBFCA589D62AD4EF8646C617F69F58
+:107F000077BDAC72B9E7A417412703C8BBCF441FA4
+:107F10006FCAC25FEDC4BF834E8AFAF02BDA85FACE
+:107F2000F9AB9CF875973F6FBCFA014F141FE751EE
+:107F30003C017D9E379BD123B547D17E7AC0D76166
+:107F400002BC1F2836644BEA6B175672989FF92CB7
+:107F5000DD6851BBE7FE95DB4D68975F4C6580841B
+:107F6000CFB4FEA37A59C376542E542ACC6E97C050
+:107F70001E9FAF6CAB82F63B295E81DF77027F43A9
+:107F80007C20A1A11CAE97DB2B36D2BE5B8F4AB200
+:107F90000246ACBE14F1EBE7FCFE912751097EC806
+:107FA0002DFF4B26BB0CD04B03FBBD9A38BE4519A9
+:107FB000FC0D609F8CA9D3A702D833B5DB5E275791
+:107FC000A65B57B5C2F07F47DDE10E344F9F77EED9
+:107FD000473CCB4DA048D897542B36FA0E97317FAB
+:107FE0000749D0F5407D4E371F150E4CAF0FBAE64E
+:107FF0003F96C753DCF55E56B8BFCE60F03244FF03
+:108000001B07EE5FC0E76C9BC2E323D40043221E34
+:1080100049ECFA5BB9F15005BCA75CB709F0B55D56
+:1080200026D5CCDF1C473D14E1E3ED2CCFC1F60B88
+:10803000552647C79AFA16C0F7D866192C05F2B824
+:1080400062E0FB51CBEBF67B281EDA0B492C64E097
+:1080500010D8EF8BE335A4CBFC5CA6C7F2EB290963
+:10806000D07AF9A52469D0F6EDFB1FA8D068394273
+:108070003754600AFBCA193E7D252406A690C72204
+:1080800029997D4F424C5229EFB140951E183F036C
+:10809000F75F77E69298D7E8931B82AEEE6CBEC787
+:1080A0000F7AE481E27BAE9800FEC65215FDE4E44F
+:1080B000630A27E14F54205E163761BCF6596CDE27
+:1080C000F40DE253D5D9FAC7DC3F1BF9A43DFC34CB
+:1080D000CEC35A4762E3B15E8C60FC860A54F05707
+:1080E0003655337BD78D8FF524F1B832DD4EAF870F
+:1080F000906EDA3F51F8BEE0C58D60E78F835F690F
+:10810000F9974D7FDC381CBB45C40F85DDB245EDCA
+:1081100044BEB728CF815E12768CBFB813C7FDBFAF
+:108120009CDE87DABFBFC4E96F75DB356E7BA65E68
+:10813000D61DF6AB7B5D1F795257C0FCB6E4537E6B
+:108140004FA3077E03FA9AB6DF115DFCAB89465F49
+:108150003F7D72C8C0EFA23CE6AC86F8197A7D2A52
+:10816000F7608F6632BE1A2BE4D037285F0D107F80
+:10817000147CF511151287804FD40EA42F6296201F
+:108180005F097E51BA3BDACFA7F460D4CBE0B906E1
+:10819000FE2239B45C48E93D65B38784BC504B3B53
+:1081A000E313A5FE74F7A021231ECF94317F7596AB
+:1081B000D56D4293606927C6F5285DFD17D095AA55
+:1081C0002725C0EB98FB17E0BA7EA93056F7AB2CF9
+:1081D0007EEC5EC7CF397C89BE1BED793F1B8EB22A
+:1081E000F87D31363F579CBDFE5703C6D9FD319708
+:1081F0009D334C3F428ECAFD08DCEF3558FBE1C68B
+:10820000D795B323903E7ACB19E4ED4D2AE78BA3A3
+:10821000BB1C70E9070F65476CA0F9F9859FFE53F9
+:10822000C60550870D010E6E385EA23AFD879F3756
+:108230001CDDF1EF97B8DC1F4C1E044D33252BE0FD
+:108240003F23CCBF1322DCBFE3A4F79DCD32DA215C
+:10825000C1B0BC134CC9ACFA6ED4C1627C4AEF55B4
+:10826000AA8DDE47971E4A413BB73ECAA4870693B4
+:10827000B7AB7CE60D2ACAADF4FBF1BE7C03CA2580
+:1082800069F20D32E2B5EEF3C937182ABC7BFD9BCB
+:108290003C7FE0867241C7C6D2DF51B8AC3EE821D0
+:1082A000E897F998AECE16575BCDF78137F07DE4AD
+:1082B0008D241E818FA7885C09FC728A1C8E4CB3AA
+:1082C000C993FB548DF14B9BE76DF0AF8A78F94D64
+:1082D0001DAC2CE673F3FDCEF2D7C9E23CF0EB7D8A
+:1082E000FD3E0FE26BB5CBBFD6AC32FD7133A96B4F
+:1082F00005BCB5784815C8B11B74A28EA0A6EBBA10
+:10830000671E9CB19296BFCBED91F7A95C366C715C
+:10831000D035A1A406F87DA76BDAB59710689F6CDD
+:108320002D807D5A36C17DAB1BCEABDA9CF31B6C26
+:10833000FEEEF952F2C2F9669A87BA474A6B4F3F8E
+:1083400022E40DC757A6BC2A914FF50B20205ADF17
+:108350009A43D8BEF3AD60B209E535CBA71AACFDA0
+:108360002F55463F9FB6FDAB83B45FE7EB5900CC7A
+:10837000D6966BC5C12F24E28235A4CE1C4D7F5505
+:10838000F72DB246135BBDE810EB150F5C2FD3BC85
+:108390004FE83E4BBEB06FFEDF9512C7D434F3BF3B
+:1083A0005D49D440FF5EC083024F15F18D7E608A27
+:1083B000DF5A35D4266541BE5317EE03FD86EAA089
+:1083C000875AF805E45A09936BC112E777B77FF82B
+:1083D0004355C4E153C87F188236C07E08A514F007
+:1083E000DF94AB277BEBD3F16A605D1742298E7275
+:1083F000A35E67F56B8871D7EC32E43F8C3FD4B74E
+:108400009F8F71F5FA9106FA77551233B10F17DD88
+:10841000D59E9548D2A60F6BD51E0DF8AC96DA45C1
+:10842000F6F7EBA38AC34FEB7E7AA8E51C2A817D81
+:1084300092CCFC483A2DDBD6FDA70E89E7AF185940
+:108440004B06F0DFAD8F327FF00DEDE3B398DFD058
+:10845000297F4F3732BFDCBF3DF67D0DFCFCA71EE8
+:108460003D7615C07BEDBF2AC407F91B8F85490AED
+:10847000EDB1A406F6D89A2EC54CA6CDAF6862F130
+:10848000CFC7C388AF354F7A930B69FB354FBF33E6
+:1084900085D0F99DDED4F3E268B09B1F95581E820B
+:1084A000D53DE56AFA7E8D4A56A4F31B4CF630F9A9
+:1084B00073F2D96015F0B7B467FFF5D86FE7528F44
+:1084C000D7B6DF2EF678906F693D66973F2225C7B5
+:1084D0004BE9E6C7F23F4E3E22B1F9EDF524FD30FF
+:1084E000BF3D3BB5049D47ED9E0F509ECC7DFC8764
+:1084F000118043ED5EC5A1076AF72829EF147C1EA1
+:108500008327C48DA41940279C5EBAD661BCA8A657
+:1085100073EB07E0C7A8DDEB946B142EB114C0F524
+:108520000D25B610CA4FFD4BC4A0A07AFFD0C311D1
+:10853000802BED77A59605FAC649DFD0FFD99CFEC2
+:10854000FD11D283F1BADACE76365ED7577E0F7A36
+:10855000A5D6253FDF875FF2FBDB33D7785CF6CC0F
+:108560009EA1C5EBD6FEF0CC43161DF7E4937F78B1
+:10857000C8A2F3BFE5AFFFF9D0B7803F7FE6D74190
+:10858000FED73EFAEB08B1D163AD87F1E3E9B1C4A0
+:10859000A27B5472FA37DE24F84B4EFFF4F7E30C5B
+:1085A000BAEED34FFC25CFA0F5EB7F3A7F14C0A1E4
+:1085B000FEC773470DB4FF067A4D7AEDF34A225E8B
+:1085C0008DBD123382F6F1A70B3F07BA0E8C83796B
+:1085D0009E3AE28D81DBB996BE6B980AF85A87FA0B
+:1085E00018CA1B289C6B1EDBFC01C889FEF0B6462E
+:1085F000CBE8AC4F8D06A77D4DD73B0B106FA40782
+:10860000F5A8BB7EED6B149F1766C6DF19F2B106A5
+:10861000F2AEF6B176365E27C55FA43FFE4EC12F9F
+:10862000B3FAE3EF0E17FECE905BBE970F798D5D28
+:10863000231C7152F1EC8B0FC6B3E203C80B210F60
+:1086400006836FB5C4E6B5CC633EE801BE7A32D886
+:108650008BDF8580DF1F9E1947287D1CF7F45C0F98
+:1086600072B3E7A75E7D177DBFE6A76F209F9DFED3
+:10867000F12B9A81F9992424E5F13C31F67308E451
+:10868000700DDBCB91DADDE19437D287A79AE4A2B3
+:108690004A2382EF8FE1FB24A3FF9AE4FE25521ABE
+:1086A000BCBDE1296276407224C265DDEEDF69CC93
+:1086B000BEECC3A7540EF83CB600DE67C2A758BF95
+:1086C0000EEB9F69C3EB6EC6B7EEFA35943F41EFF0
+:1086D000F5C36F527A039EA7777A55D07BA7C1FE68
+:1086E0000AF5C77B1FFC99FD33DCFDCA2B6EFE1615
+:1086F000F1630E87CCF461713B60E0F50D177E3FAE
+:10870000F7180E3A12703CF9717AF97F8ACB8D1AFC
+:10871000625516D8EC139F87DA27905F46E2D6E8B9
+:10872000C2BEF99E847D04A5BF938F2A18AF69ED60
+:108730003C8072DC2D2F6A48FA7DFB5F3DCC5EAC3D
+:10874000D9BB7F0AC8B593CF3D8BF459F3D8310D0F
+:10875000F62F2FEE794AEB2EEDE307D00F499B7EE3
+:1087600038F9A3FD53983C48BFFF0D6AACFFDA7D92
+:10877000CEFE6B1FFBC0D1FF5AAB5363790C038F46
+:10878000F3BE6A2E85F5BE7FC843409EBEDFA9A416
+:10879000F5BFF670FD28E0D4FACA82DF419CBFEC39
+:1087A00070C0003DDAB5C91C7507D86B873D04E47D
+:1087B0003751CD3F7869B9EB9500C633BA0E5FAB40
+:1087C0001836FFC4332E78CE7CCD9A1BA6FDCDEC97
+:1087D0008E97C116CA2D37CA8FD27DA3DD7FF54A89
+:1087E000E52890FBCD60CF4F84F16251F07F289156
+:1087F00005952C7F50D6FD69F537EBCF138A63BE04
+:10880000A047977B7DB6488F62BFC5FD4DADA1F4F3
+:10881000FEE8059AD817D0716D7290DAAA55E9F082
+:10882000364B637648A6EF976ACCDF93E97BC52089
+:10883000ED7BF99BE3470BCBF174F39EC6FB71FB19
+:108840005733C9030FEFA74C331CEB05782FB2E564
+:10885000C58F26C98D90274A4221773C3AEEB3C78F
+:10886000A3AB0EED87F873EED5FBF201FE11D2AC8F
+:10887000BF87763C899D1BC08E75C79FDD7989991E
+:10888000E2D1BE50CD9114E9DF5FFFF8BB897928B2
+:10889000CD63E6F90A6DF1F766BD5FFC7DBD46C7A5
+:1088A0006DC9808725DA9C7FD280BE649248F77DAF
+:1088B0000BA79BCB49F7532B619E3116BF9FED82CF
+:1088C000D7A51C5E3F3B9F2E9CAA9E0A62A81E0A4B
+:1088D000DFB94BCC661081F397F7ACDD0F7C26E255
+:1088E000F7D644F95C70E8F01B6E5EC42ADFE27BC9
+:1088F000B521E445103D27AD5EE89B87C5F755518E
+:10890000DC2779389F1D78F3661FC82D95242A0B24
+:1089100061BFC4E39A986F4FFBCB4BF98949E7AB32
+:10892000E906DADB79A9D50FDC0471757D0CC62365
+:1089300094B397A0FFD0DDAF128D59980F16322A4D
+:1089400014DB38ADB92C3EA3EAF1B479C3ABB4C49F
+:1089500013B05EE5EC65D8AFEC8B613D121A5ABEE0
+:10896000EC77AE8E207C7D14BE201F1164B02E9E4D
+:108970003775F7D511D433FE839E9DF0DD1F6279E4
+:1089800054B7CB8118E459B9F3A82ADE6A27D05F1F
+:10899000EB3109E328827E5B0BEBCE03393E401EB0
+:1089A000D54B9ACDAF9E298FCA1FBA11F3A8FC9F51
+:1089B000368FCA2A9807F6586B361179559644E7D0
+:1089C000D1CAF3A2FEA3F5A5B9A09F5AFDE2FBCB45
+:1089D000734D7BD95A7F00CB3CEF6AB4B7BD09EA2F
+:1089E000E78E26759DE8CF33C93536391BF1AA08C5
+:1089F000E77FD6CC7735479E7CD4115F3AF0E666A8
+:108A00001FE86FFAAC2C02F851BA02BB3D2FD54ECD
+:108A1000ECFA483C051DB5160F1CBF53CF5E847E93
+:108A20007C51F6E949D34C537FBE8FD91F827E7D9E
+:108A3000B924097AC967241EB809E83937140B32FA
+:108A4000BAC438595B08DD53FDD6D1567C03C6DB6A
+:108A5000CEE804B95ED071FFF95FC6E75F64615C80
+:108A60002244309E96791D65B88E559A19F6DAE043
+:108A7000987B5EFABCD4BBBD6C3D2DF1E52CEFAC10
+:108A8000DA198715791AA27E504A1478411EE6B287
+:108A900038ACEC63FCD6872FAA2A6CFECD26B2DC5C
+:108AA0000212509777E2D146554F62FD127FE27C69
+:108AB000AF233ED7CDE2BAAE78E27CE516C6DF83BF
+:108AC000E04F9CCBD80A71B789109F8BF2F37D06DB
+:108AD0008FD3992CAF28033DB5150F1C87EA688CFE
+:108AE00061FBBB1ACB59BE9244B85F3BD9047402F8
+:108AF0006E0946F73F6802BE092B822F7E88E53B50
+:108B00002556BEC9FBCC5CC8373CF0E61B55AB28EC
+:108B10007DB49A01E4FFC1D6A72767205E873B4E4C
+:108B2000FFF5B271DBCC10EE77075BB79E62E30E08
+:108B3000751C115FEB5B9F0FC769350619A7838D05
+:108B400033F8FC199FDCB17F35E62FF828FFFBE9ED
+:108B50007BDFEC1E9248D37F16E79F036F7A515E4E
+:108B6000B7E5B2FC284F49C8644E4067FF9ED2BCAF
+:108B70003978DEA1EC02CC9FBF637F3BCA190DC6DA
+:108B8000A1553CB1D04AD62E61C239DBC83C82F136
+:108B9000674F49DE2A78DF403AE273400F97CB2CCB
+:108BA0003FB9A4E426E8271BF892CEA3DCC7F69DC4
+:108BB0009E928B6F86FAFBA7BF9E68023895333A68
+:108BC0002007F31D706C358AC4B99D01F9DE53EEA0
+:108BD0008C5B109F33FF93A84B306E4EE54287D7D6
+:108BE000665752BD781FF23329B3C0DEDBFEB56B8A
+:108BF00063767EFE672DFE1D565FE46B093E4F9F38
+:108C000037D79A2BF2E6123EA50CCE29F5E6532F64
+:108C1000CCB7E77FF17CEA90C8A7E6F1CC0EFA5F0B
+:108C2000BAFC39F739C6CF2B9FFA292FDF0F07C9B6
+:108C300058C8A7FE8987C4529017F36B250679316F
+:108C40006EFA70F7E73E07D06B8F64E0E7F7013804
+:108C500036B9979F70E1ED463FC6E7C478CF837C75
+:108C60002A1D9C4F47573BFB195BE73C9F755E8372
+:108C7000335E55681538EA9FDF56E4F83EBEE302DE
+:108C8000C7F789F74F759427252F76D4FFD29E39E1
+:108C90008EF2E4CE2B1DF52FDCBBD851BE28B5CC0F
+:108CA000517FDAC11B1CDFA71F5AE3F83EF3C87AD5
+:108CB000477956F7371DF51BA87902F92C7040004B
+:108CC000F7ABDB46CB76FA6CCFA67A250BF3B8353B
+:108CD0009ED48FF166968BDC9767E06EA7146BA627
+:108CE0004EF9573126CCD331CFF046E423A5386F67
+:108CF0008E81EF672C00BF132963E7B444FCDA537D
+:108D00004C527EC8EF0BB9F0EB8A4B7B946D29C0B7
+:108D1000B376F4CB07A5487FBC7AA2EE7CC6A1C58A
+:108D2000B555E3B3E507E4F9385F8CA57C817EC4D3
+:108D30008F15D8B7907961B40F6CFB1B84A3D8DF73
+:108D40005CE623CD0053C11715CB7B46BF80D5C44D
+:108D5000BEC62B0F272FB9BF5EF1A2DD25E4CC6084
+:108D60007A45494E73E421B89F54FE95F9609F1EE1
+:108D70005986F2A8775FD02B1FE333E1BB478DA163
+:108D80007CEC957F7B0A1C7261A8F6995B4EDF052F
+:108D9000421FCF05A597D711C80BA372E9CEABAF81
+:108DA000C23818A9278EF3807955711FE83D6A975C
+:108DB0007DC567DB3F47CA997DF6F766A78660BD2C
+:108DC00036F927EC5501D7118575718CEB85650255
+:108DD000FBAAA6D9B128F801DBA08A6D9FF65DDF5A
+:108DE000F958BF39A4C9E02F6D3E381FE3035E7FF9
+:108DF000DC0779CE4D9E7825ACAB295BD6D3E53B1D
+:108E00006DF631FF8CD6109CB67B00FAD034BAEFE9
+:108E10004FB3DE7FF131BF4BB3BEF820E8B99CB051
+:108E20006640FE44EBFE598B305F77A1AAC3BE9625
+:108E3000D04DDC3BB6B8222171F46769B932EA45FE
+:108E4000AD2182E30F36DF5B7DCCCFE06DF00F38D4
+:108E50005FAF96DE4F9169BE9B61BEB983CFD70BE2
+:108E6000F39560FC108EBFC9C7F0E886BF87986D88
+:108E7000F368BD96635FEE28468A61F97AF72E9C07
+:108E80008A744A05B5837EC53E82D2EFC340BF6275
+:108E9000FF2ECEB3DEE263790902AFC460FE881113
+:108EA0000915F7BD3909B6FFED931F8C8E723C3161
+:108EB00082E7BFC6A8189704378DDD8FA1F8D9BE09
+:108EC000C77B690CF1D5FE15956C027A2BA6EB8158
+:108ED00073B90759DCA9DD13AB8A87FAC613EDDF36
+:108EE000E1FB40952CC9C27B529485D174F6672F63
+:108EF0009D73B8B9E5EC011FCFC3CA27F94CCE96D4
+:108F00002E85A34499FA71DB1B0DDCAF3CFCF329E1
+:108F10001D08CFF631F7A11D2DFC63245A3688BFFA
+:108F200087C54BFBF0BCD448513CAA574C45A75FC2
+:108F30007B31C7739D2B9F97E359E057F8ED493478
+:108F400017F95AE05B017802AE94D9D181F495C249
+:108F5000F9C60DCF53FF4DE17904D600743B96AEB0
+:108F60001FF8E6C01504E3602E7E14ED04DDBBD7C8
+:108F70001FF6FFF75EBFA087CCF5ADB4FB0F11D78E
+:108F80000D737AF371BDF942F9DB6D709E44CD65C6
+:108F9000FBDD7079F3AD329CC320960EFEB5B03880
+:108FA000BF53E6BC7F2450EADC7FF85CF74D78F8CD
+:108FB000FEA3DFFD2ADCCE12E7F9DDF377E36BAE2B
+:108FC0003F7D1E261993DEEFEA8EC789F886C88397
+:108FD00015710084035DBF67961C47F95746CC9D09
+:108FE00069E4D3323FD30B5DCFF9314F225CA5A1A9
+:108FF0003FB6A02C5501E5823A12033D71F1F143D1
+:1090000024413BBD20C0E47E41595202BF47C149C3
+:109010009617B89DC72B0BEA93D24ADB38969FE987
+:10902000AD8FDEBC1DE5E37363595EFA6D15CC7E32
+:109030003B14BDA1A302C62D67F9E461BA5F84BCED
+:10904000B1F0116F12EDADB26E027E54AA05AC30D4
+:10905000FD7EBC914CBD713CE47DF9F079B251C705
+:10906000E781B1DAFECB69BDF5850103FA6D290A06
+:10907000B0F3BD611FEEF7FF9CFD75F4AB9E6E8CE7
+:1090800062FDB66F9B685734EF3F817EC3A0392DD8
+:10909000C6FCA8A642CA613E874CF0731035662C08
+:1090A00086EF077E83F5142DF11B0BEC93651AEE0A
+:1090B000EF010E104F68F2B37CB9CDFEBA68363CB2
+:1090C0000BC98A4569E0BD82EB1D4A518A96D79744
+:1090D00087A495A7942CF02797914EC873F7B424D2
+:1090E0002B404F93D5BA01E38CF1252BC07F3CA6D2
+:1090F0005A8F810F5D2B67E745043E3C7E127F222D
+:1091000004F552D2AD74DC89011DC7293892C4BC64
+:10911000E58FDE9C99D6FEBFFD68057EDFD65879C7
+:10912000789E8D9F4319E2951B8BE73CE0A7E3BD3A
+:10913000EA67FC9AA95FF11C6ABFAF723A39F0E6A0
+:10914000C451605F3664C8A356748AA7114C3E812F
+:109150003F62FD78635476C8DE0F8387F2DCB30C80
+:10916000AFA58C3E9B7E3C310BFA7DFECDA53AF837
+:10917000FBFE945B8CFB86534F7B4DB05F4EE590BE
+:109180006ACCB77C7AE68BB03FFC43E3C11CD526A2
+:10919000174FFDE895191EDADFA9275F99A1227301
+:1091A000251D76ECBA73AFCE003BC19A434AEAE87C
+:1091B000B356D708F45BEB63EB107972DBF3B4566C
+:1091C000785E19CCC6F679A3E43BA1ACF85E1DF736
+:1091D000EE345C378B2BF0380E5D5F5308E95AA7ED
+:1091E0001B1088175ADE7110CF7AD38BF4F75121F8
+:1091F0002929BC10FC820AB6EB594D92904FA1A5CB
+:10920000EA803D89FFE52401BE09BEA6EF475AE387
+:10921000F7C1DDE9E7F90F3C8F70E39BB74F04F826
+:1092200008B9AECE2518CFE8F99A2F09F6E83DAA7D
+:10923000F19DE560075EA7E23C6819CF1BB9F1B369
+:109240003C58E488E3E5F0F884C06B263AD9DA4864
+:1092500062C514DE3F6BF4C560FC7D8D3A967FD20B
+:1092600018C5F2DE46039F4F3796E0B3AB3186DF79
+:10927000F73496E353E4F5E1D65E417B3A5E017A3A
+:10928000E81AE687D30DD9847C852C95F8E0BE26B4
+:10929000FDE8BF55C17E1BE44A560EF2BD04ED73D6
+:1092A000799EDFC8FC39ED15469F7C15F2B4C943A1
+:1092B000249047D62CE66708437FB47DEE1242DE49
+:1092C000B6C9F573F49FB74BF8FAE87CB24CE77770
+:1092D00077FD884A1790D3BF1D958B58EEEB373D2D
+:1092E000FC86FB047FF9DB36FADE3E9DAE9AD2D1D6
+:1092F0007689C9B13BF9F73BA6CFC8BA01CAB366B4
+:1093000064815CDF3E8B183A85E35D866C79B2FA46
+:10931000EAEF683C98376F3CD74120A7EAF59D5BA0
+:109320006CFB9831165911B7D1CB5D756AE52EB437
+:109330003312F98B2763BE31F76BEF9E678EC17EC8
+:10934000B13C21F0E23C8BEB159033979D657AA8F8
+:1093500057FF7CCCDE0BBDA771FC6F9BBD4989001C
+:109360009F803C057959962073E83C4397B2F8F703
+:10937000AC775304F2FBB4187D0FF6A8C6F24D0A81
+:10938000A24909CA3FF2C7670620EF3DE7FED42E87
+:109390008AEF0FBBBC06C41BBB9EFB0BE6672853C2
+:1093A000341FF077C1BE6398B7A4C8DD1AEC789774
+:1093B0000526CF57C19E8589607C802A6A8A6725E9
+:1093C0008FAF8F3CD5322F04E7BE1227ECF5B707DD
+:1093D00012B7B21D33317D51CA0F7ED1FE82168085
+:1093E000C7560F2B2F0B4C6AB1B04CEB67B37233DF
+:1093F0006DBF35BB332A6743D2D4C4968397425995
+:10940000D49FD862CD26E41AAE0F48285108FCDE5E
+:109410005BD669396C2BABAC4C7CEC29D6BBEEC06F
+:109420005F5E1C4DE150B34FEAC410DFBE9D12AC2D
+:10943000BB60EF4E94AF054982FBFE82A49484A3E7
+:109440009D7B1A0FEACDC2B926F04245C3A428BBC2
+:109450005F484B7A62B0BD9CC4EF0F1174F17490F9
+:10946000E9C74949DADE1E9776DD273289DF57835F
+:10947000200579B98D9D0776D37929EFAF81585BA7
+:10948000E03C2E79CCA3637C9CFBD94F0ABB89FBC3
+:10949000736EE10E3CCF262B7001C8BF952AFA816E
+:1094A000D7162637521B8AAC7DB630462D56D2E2EF
+:1094B00067F4B236BB336F2AC5674BB6B3DCC4F36F
+:1094C000E7A3D956369CD7ADD97BF738C8EFA92189
+:1094D0001DD77F13E6FB328B879FD83F2BEB125AA9
+:1094E0005EF7328B63ACEB7A4503FABE27C0F38E8E
+:1094F000BA2EBA12D657B34D267221E34B73229D72
+:10950000AED971019CAC7B7EEB5BF3FD630979A462
+:10951000C8D4E58B08E90E9E68F151FC3FA2E9939F
+:10952000803EBA833D2D405F6B67C99C9E7A5E305A
+:10953000559EFF5800E35CDE027196DDCB2AAF0436
+:10954000732B4F66FC4B0912E3DA4A76B30FECF942
+:109550003FB6C8683F838B7403857BB14A0EAAF47B
+:10956000B95DA3F8043E6B55511ED2F76D1EC44B76
+:1095700007DE3342DAD83D2DE3F77957829D5D5CF3
+:1095800067AE467B5B2F453FC038D2FB837912E73D
+:1095900011267F27EAA442A5F566050B117FC55564
+:1095A000D7AE85764A784900F83D4F495AD8FF77BB
+:1095B000991CDE2E273B7D2097234588DFED114641
+:1095C00017D63DA54817BBE53917805DD422ADDC21
+:1095D000F20BC06B76119E7B85F7EB61FD1C9F4DF6
+:1095E0007ACC07F8DBCDF1A9EC942DC8D714EFB7EE
+:1095F0004A37AC06B89ED8523FDF47E19AE735DBE1
+:1096000046503C1CDF52DF129D857828F2D1EFC70F
+:1096100003F52D3E8A97DD1BCD02DD569EF8099598
+:10962000EA48B4F52DE66CF09FDCB7069410FDFE19
+:1096300002F83F1EC9117CCFBE1717F5CA1113ECF3
+:10964000D226AB4FAEF8A85E28B6D59F47E5C20F2D
+:109650001E5210AFFF4EC7033941D76101DDF74CF1
+:1096600052D12E08D0B904683930B908F36DE9BA7F
+:109670004900EC86C92AEA7911C7D126C96837435F
+:109680007DA087407E11E6CF51791D87733E4A94B5
+:10969000C5751465874979980479FEBEA42FC2FB6D
+:1096A00048FC25B6BC0290BFAE3C04C5551EEFED8C
+:1096B000CE97A97ECD3DBA481A47F1F25E80EF8B76
+:1096C00072E93E96BE7F3FC0FC40B7C7AD2F43BE98
+:1096D0000C31BAF3593C2A3E159EA3AE2B1E359091
+:1096E000FFA5FF7E3586F6CBBD63D4B4F960FF1AC3
+:1096F00064FE41EFD862BC57A38150FE07BE08F15B
+:10970000FBF2B8FCF0707BC17D4E40C8134F365B56
+:10971000637DFBDC5139A1BE73704AC8F4813CD82B
+:10972000AF4FCD027B743C9753CDA9595F05BB4524
+:10973000E5F260879F9DCBEDC9269DBB08D8BF3160
+:1097400062CF4B10F2605BA30F9F0F5F3601E39770
+:109750000F5F963707E215072E7E1FF7BF6776303B
+:10976000FE3D73E805B84B899CB1A8B6311859A1E4
+:109770005F3E752FDE17F27D357E17E6CB43BE0EBA
+:109780009DD25DD9CE3CCC47395CCE0578DE808752
+:109790007D17F778A867BF847EE06D7C3DBEC43C32
+:1097A000DC57821B0FCE1DFB4907DEC724E0E0BE5D
+:1097B000BF433D3B85F9EB036C5F2AF297DC794AA6
+:1097C000623EFB8219EE3376E143F835041E44FB1A
+:1097D0007AC91CA50F4037B5671592B4E585F49D8D
+:1097E000DBD0F0FD6938EF9205F7AF243A2E29045B
+:1097F0003E48A29DE80F353BEE712551B5C77EBEB0
+:1098000024E83AEFE2E617B83F18F4B4660C7CAEF1
+:10981000E57DBACD1579B998A7AE9207C0AE3D15D2
+:109820007C6B06F8E36AA998005739512D3C4F7AB2
+:109830009AEF4BD47DB7E2791E313FE18F13E59A61
+:10984000BD8BD04F57BB3B84E7796A924C0EAEF389
+:109850005907BDB23DEFD64C41BEAD672FEB6F3C13
+:10986000E080D2C7877A753EAC3FD870FE4C38672F
+:109870009227D79D370EE0A3323CC07EF9C9109ED7
+:10988000D355BDB6FB53DFE2FBE365DC1E09124B8B
+:1098900006782A8158376167164D95DA474AAFDC5A
+:1098A0009BDC02FCB0DD656F6D0FB0726B70724BAC
+:1098B0007329EA67948BCB023F437BA8C52FCACF9D
+:1098C000A29CDCAEB1FB3AACA7BD06E83DDA1ECFE8
+:1098D000A75BCB4A507F2845A400E0360F1C2D2003
+:1098E000FF9EF6EE023FC38FFC896B0236B89D0ADD
+:1098F0001F1907FBCA34FD598EFEC60DAF3F3A7ED5
+:1099000017E0417C9F17B91FFBA7EDD0DF41C61CB4
+:109910007A8BDABA24EF692F9E33DCE171DADBE26D
+:10992000F920E7CB36D7BD1DBE44B3099B73C19F59
+:10993000EE7B9605BFAA672739F2A4C607593C5BA0
+:10994000554D7055D2EFA5EC7B80D1411BCFC7C9D7
+:109950003C4E4E86719C71BBFEE3CCE07282F07D82
+:10996000ACAAF7DECB3940FEAB3BBEE8966FBD4FED
+:109970002EDFF2393DC7A5C4B3415A5E93EC5C10AB
+:1099800060FC3905F87335A7D3923D773F076AFD30
+:10999000319FF967D837ACF2991704A70F9F7FBAA8
+:1099A00083623DFDE417B3CBAA999D5BDF3EED4A90
+:1099B00028D7DF51A45B69E245E2597D36E8905F24
+:1099C000F7707F51B56AA11CAB3E1BC1EF9FDF78DA
+:1099D0007EC779B6FEE385F0BB18EF16977C3E7024
+:1099E000F14BDBCB291DD73FE191BDB671EA9FE07A
+:1099F000E780FC545E3BF9DD047E570B496F9E22E5
+:109A0000C887BB3451565AC12E7AC42E1FCAC16EA4
+:109A1000EB6B0FF716DE15E0F5AD60FAFA4157FD76
+:109A200022D17F2ED677CF47C81F28839DA67EE2FE
+:109A300015F343F975B7ECEA2F478C3F06FB13F695
+:109A4000FAB703E35F843B25EECA4E568C66FE1DD3
+:109A500003EC80EFABB180FD3EAC6F737AAD3E7B23
+:109A6000BE03DF7D709FE078FFFBC6A8235FFFE6A3
+:109A7000443D9ED3F87680D16535B5E8B1DD8ED111
+:109A80008E3CFD7FCCE3D3CEE3920CF3B8EC6F3C7D
+:109A90008F42077FF6CDA3D8F1FED3CE631FF70B1D
+:109AA0003FC79FF375762FC07C4342BFF57C5AD7E2
+:109AB0004F69FDCBF4E9A3CFF92AB14278CF6D927B
+:109AC000DD6346CBE00FF8EA27B7BD7B39DE0B6DCF
+:109AD000623E8E57E4E3F0731E9BC70C7C5F91FBE4
+:109AE000EF3BB8BF0733DCD3DA1862FBEEBB2FBC09
+:109AF0008A60FE7A28817182FDF90BA260A77FE758
+:109B0000C21A7C36E7CF88823C6A0A7FDD916F4EAD
+:109B1000F70869CFC1FE91F74BCE7E59B69F47D962
+:109B20000CE751D2D41771B1CDBE3ACC03FFA2D607
+:109B3000FBE017B4DE4BC38CDE36FB1218176C8DBE
+:109B40007E31F37F26C4C6B9FBC2CB089BEF6529E3
+:109B500016F7D10CFB7960F1DC1F9E118575366517
+:109B60002F88023D3767CF70AC47C9B09E5561065C
+:109B7000A7CDFA17BB9EC39F793D0BD2E6C1AAB908
+:109B8000E9EF176B17788A2690CEBEA8759DFA1B51
+:109B9000AF6B14C7577588F90D361B8C8F824AFC42
+:109BA0005785D2E07C38D8DF1D21C5863C943CBC6B
+:109BB000DF727865E2DF659EE44898D79146B67F0C
+:109BC0007E9DDF27F5DBEAA630FAB55DE36C1EB3B8
+:109BD0002B3C909FE37F563BCFA70F26375A422C52
+:109BE0005EF3B584B3DDD2AA60DAFB4D28FCEE2A21
+:109BF0002CEC83673FFC7FCE70CB448FC3855B6BBF
+:109C00007478701B8C0FAAE1929BE983C34DD05BE3
+:109C1000A67EFE7FA1B307870E2FA4AFBF15BCFEA3
+:109C20005EE9EB1980D710F8F21FF03AC7F5E6D0DD
+:109C3000E025E4D81E8DDDBBE8EEE74498DDAF34C7
+:109C400051AA3B7C05C417BEA2A0BFF7F08E79EBEA
+:109C5000886CAFC7F4D9E1CAB9EB30DF351EC47BDD
+:109C60003C5F9363FF5E067187C5AC5DBF7972F898
+:109C7000BC14CEE67E4B6324F8115E8B5F3DE0FAA8
+:109C800048A56D5D989769BB8F4AE90FDFC3C4B8DB
+:109C9000A30CFC4D0BD3CF43E033D3B8C3C5E76B64
+:109CA000F1EF0F0B9F83ADF7D970D190E485D837D2
+:109CB000E492DEBF977101C0738FCCF2398EC2ABD4
+:109CC0007CB89F8C60A5A555A376029ECA223CEF66
+:109CD0004933D6819FCC7BF5C2AD618AB7D7AEC977
+:109CE00096BC367879230CCF3396A7B70B73233CF9
+:109CF0002FB7B7BD44E03E44773D85D7BB6639BB3F
+:109D0000978AA8E6D8C5B67375535CDFDDEDC74604
+:109D100022F8FD351E6F777FCFE2ED972E19B83D03
+:109D2000A963F7B950BA1B9BEE7E41C11F9DE14468
+:109D300034429FAF4B8907BF01743429C4E21E2A05
+:109D4000298478BDE8275725298DC2FD5D8F3116FE
+:109D5000FCB469FA291CA89F4C7015EB11E3002B89
+:109D6000C2BD2C74FF88FBC5329390D9B04FF4C6A6
+:109D70006E65870D191DE4F0FC999975C1E446B034
+:109D8000F354BA4EDB7CBBFE6BEEFF80EF5D876564
+:109D90007D53617F380C261F1670BAC955129BFC83
+:109DA000E01F5B21A5BDDFECF208FB3B251F847B98
+:109DB000E3EA38CE84FB121EB8E7E05A9EDF44483F
+:109DC00062ACFDEF8C7DC0E58ABB5DAEC2E2D1E442
+:109DD0000DC6CF7B76AD199B8E7F5EE57CFA41B8D0
+:109DE000C4919FB4247EAB07F873C9C2451E2304F7
+:109DF000DF99BCBC86CF638F96187B51A80F4E1994
+:109E0000E510874FD7914413DCEFB0A241C238521E
+:109E1000E90646772B36EC97D7D1E74ECE7F8B00FD
+:109E200007B6FE6EE578DDB32B300EE6BFA7D74F41
+:109E3000473BA6F3B8FE7E827EAFD591AB3683DF7B
+:109E4000AB5B22FCEF32FCA412F20DBA799E480BF8
+:109E5000FDBE11E63B6F24F2F7840D1FD4837CEE28
+:109E6000D2089E97FB8F762FFE7D0B412FBD72622D
+:109E7000C3478D907477AF969A0C7433B2A9EE1BDA
+:109E8000E9FCE416E7FB0F43F1AC7476AE780A798F
+:109E90002EEA2D560D4FBAFA57573AE59898F7081B
+:109EA0006FEA54BAFB1A7AE93039B0DEFB3597E332
+:109EB00002EFBDF83E927E5FB423C2E2777B9273DD
+:109EC000D6A2DEB2BC06C843311F01AF5C8BC1E92C
+:109ED000DA258A43DEAE5818749D476270FDAAD712
+:109EE0007808D671EFAE9726E3DF5174E987809248
+:109EF000D0E0FBCD24E50139715C31F0F97AA3F3B0
+:109F00005EE6D749E28EE9A03F1B94B47CF50CA72E
+:109F10009FD7AB565D83F36F567498FFB1E523AEC0
+:109F20002A07F952E5C17B828F35DF16BEC9B67E9E
+:109F3000A1EFDCF3FA6DF5AA01F5D6D22A27DEF6F9
+:109F400068CC2EB0AE647CB89ACA9BD9485FDD77E6
+:109F5000CCA4E31F4EE65CB4855527F0F71CAFE6B2
+:109F6000BF1F971377CEA4F2E684CCFC61D63F31B5
+:109F7000B9B1E4BE780BC4794F344CFB6937ADF707
+:109F8000325FDF5B0D03EB47373D4DB8CF793FE5DF
+:109F90008C234483F689FAF4FAE0FAEC2093AF6A52
+:109FA0006C1CC897EB36A4AFB709922B69BD137F21
+:109FB00055AAD3E56D7EA2333E59114FDFFE133D06
+:109FC000CCBE835E4A03E7BD59412EE7F47120A75A
+:109FD0005764986F575604EBBDD372FB7510EF3B77
+:109FE0002E3BE5F30FB278FC3C8BC9E713BB9679A7
+:109FF00046029E5A251DE8E1EDECD824A0B795CD88
+:10A00000C7D08FF02D5EFFBA50FC43D04F4B8E2C43
+:10A010009E3F92E2A56B3989494666F9FF31E79F79
+:10A020005C85DD6340F5DFBBA0FF68D377D1FE50D0
+:10A03000CD715F9BCCAE6C84BCC213B2B506F3503D
+:10A04000760558DE11894DB7DF2F13E0F338B17B69
+:10A0500078F8BE261E1CD08E3F4C3A6A70DCDD417B
+:10A060001DE28F872B95D4E57492EFED0EE23DAFA4
+:10A070006EBEC834FE70EDC013BB8767070EB6EE28
+:10A080005856E190ECC03395F7DE59067CA4754C28
+:10A0900049277F859C7E8DFBADDCF4239EB3393E42
+:10A0A0008E27079ED7CDF73BE7735D9D733E825F9A
+:10A0B0008E279B02901F4E479F6CB74BC9BCE9830C
+:10A0C000E859E6FFCD34CF389FA790134079104F61
+:10A0D0005BCDE5CD5B0DF746EC7870AFFF84CCF738
+:10A0E000070FB1BCADF1F19573461A7DF4795D1699
+:10A0F00093439F375D0A3DE3EEE7EF9D0E859E1B80
+:10A100008C0E855C70B7FF00E2FC23E1EFE3E81AF8
+:10A11000C4653E8818AC4CF40570448694F373CB48
+:10A12000C41807E76E4EEC0AE0FDF6D6166F12FE75
+:10A130006EC7F15D974CB2AF6707C7FF8A25D97824
+:10A140005DCA713976C528CC2F50F0BEAED78FE4EA
+:10A150002C80F2BD876490D0E4BAFA950AACEF8106
+:10A160002C9677BE62C32B680F0E97CE57D439F565
+:10A17000FF277C1DBD7696DA5306F493090EED5940
+:10A180003EB6CF892F9A0FF279D50609E5ED962CC8
+:10A1900003DFAF524D94DBA499E947E2A3F0A02A74
+:10A1A000E4182C02E0F1BFF9DF2953E39AFD7CD2D9
+:10A1B0004DDB6E9F0FF6A19B5F46EB8C8EE15E3010
+:10A1C000785E174A3C9935B24F3EBF2DD5ED1F45FD
+:10A1D000AB5C9EC5ED6DCEA7623D9767B1F5513B77
+:10A1E000ED87F8F799F8FA48CC456F7247CD4F00E4
+:10A1F000FE737C681704BC54EE43DEDCF7033ACBF5
+:10A200009B637C25EC1D77FB6BD584C36E3C94551A
+:10A21000E8C8C771DB21FFD017E9EBFFF96FAC2F5E
+:10A2200064FDD3E98BFF0779B222080080000000AB
+:10A230001F8B080000000000000BDD3D0B7854D59B
+:10A2400099E7CE9DB9994966924932933738930080
+:10A250000625780321449E370991A0A803040C1A0F
+:10A260007044D4282144C54ABFD2CD0D893120DAAB
+:10A27000505DB4D67587885DB6D235586AD1D2762E
+:10A28000B0828FEA365A45DA8D1A1FA5800FA2AD2B
+:10A29000ABDB8FAD7BFEFF9C93B9F76626046DFBAD
+:10A2A000F12D7C7ED733E7FDBFFFFFFCE7B0A22591
+:10A2B00085449D04FF7C49FF3B9C1A20C44FC8F194
+:10A2C000BFCA8DBD6E428E45DA93AF81AF4D5D90B2
+:10A2D000ED2344EF94C9A3B4DD3B473EAD81F2BD0D
+:10A2E0007D36AF44CB2BD65F238769BB4C28F9A1C1
+:10A2F000DF9234287F097FE60EFFDEF0804CA2C596
+:10A30000B179AF867518CAC77A923502F3CDF14498
+:10A31000C60709D9AB109D9411F2F6E6ECC8265A8F
+:10A32000AE7112DD3D8590B9696CBDBE8D9FB77A67
+:10A3300027D3F5F4FCBA8414D2F5DD7DFB8AF0A4B2
+:10A3400038F37B6D844CA3130402369245C86D7CB0
+:10A35000EFAB528906E3133ADFA386F145BFC3ADE5
+:10A360008444CFA5F5E368BFF2583FEBF8CBAEBC11
+:10A37000702CECFBF09533C75E3329D62F111C9659
+:10A3800049E17F5E0AF3B6C92AC075D73D498D3DC4
+:10A3900071E0A673B85AE7873F76BA8F25FCFF971E
+:10A3A0006EACBCC34341B22965CEEC709CF90F93EF
+:10A3B000F0DDD3E87CFA46369F759EC57C9EC3F5DA
+:10A3C000D72E05F87FA6CB5E99C263A0414EAD8023
+:10A3D0007EF50E753C1D7F40BFD5739D619DBF4FBF
+:10A3E000009FDF375EEB898B07FEBDA2DE4C076F57
+:10A3F00093C197A7C33C3BE3AFEF16581FC5DF31AE
+:10A40000257CCF85747DC72F96559DAEE7B88DF618
+:10A41000037A7990F60B0CEF773DEFF7F6C691E9EA
+:10A420007249AD793D4B8F249BE9D2461A7BE3EC10
+:10A4300067685D6748F72B2CFCB74B191CE3A5FD3B
+:10A44000DFDE71EACDDB613F3B9211DED67132D3A4
+:10A4500065C6A7C02700AF2D499C4FBA9B9FA6FD9C
+:10A46000DEBE344FDD4486F30721DD97CDA0F5FD38
+:10A470003DB6D22DB46A574F4A6324CE7A27A7330C
+:10A480003AF0C97AF279B43D7983E103C80DF866F0
+:10A4900029A7376FCF0F5B882DD6EF0DA0832442FD
+:10A4A0007EDBEAC4EF36AF13C7A95BB84809D079A1
+:10A4B000AEB3130DE0877FE8B8DEF30A766CA153E4
+:10A4C000BD6E63657D15E53F69F87A1EE674B92BAC
+:10A4D000B27844F8D637C82678D62D34C3D74A9FE9
+:10A4E0004723B6DA78FB17F49C68BE2B1D113FE0BA
+:10A4F000E908DFEF61BEDFDF37B67BA0BD759E5D8B
+:10A50000919E11F9E0AA46335D9C6E9F6F7A830895
+:10A510008FE56173BF2BEACDFB5D4A5A66134A2A69
+:10A52000CB88EA806F1D6929799A82F2E8034B7023
+:10A530003DAF13520B729E9CBAB56451496CFC1727
+:10A54000393D7F5677EBA5202EDF505A4ABC71D695
+:10A55000F33A8793C0F7EB09E019E572F70DC033C2
+:10A56000D0EB32392E9EFF8BCFFB46C3C87CB4ACF8
+:10A570006E643C9FF07A113E6F34B427C33E8F89DE
+:10A58000791F64F3825E33E2E3C457D45B56FE1D49
+:10A5900020FA4D48C791642FE8111F9087418F74AE
+:10A5A000A4DB981C2F1E598F88EF6F855CB5B4AF64
+:10A5B000B36B0E233ECABD01849B28D72D34AFF365
+:10A5C000BD54060FCA7163431E83DCE0FA55E8BB35
+:10A5D0007B7F70FE5BA03FC7A7333CD4853E7100F4
+:10A5E0003CA87CBDC303FB7AD5E605F95A7E4473CB
+:10A5F00018E137278DB53FBE7364F8CD4963EB3C56
+:10A600009D9CB5EEF7ED6FDF3905C67DFBDB9F3B0B
+:10A610008CE32FFB229F443363E5ABEB252D1287A0
+:10A62000CF36789551C17D83058E577F3116C7F798
+:10A63000C9A4A537CEBEECE94E6CBF3454E9F05343
+:10A64000785EBB5152253A84239DC9DD6B85BCB32E
+:10A6500007C62EA270F7B7B7DC168A33CE6C0EEFA2
+:10A660003FBB4369F1F84C7C853E17ED96D9C38E0C
+:10A6700078EDAD7A7580F3B9B55DE80CE971C80E77
+:10A68000B2B41FED3AE6A6313ACC4C8A7E04F28889
+:10A690004C32DB61A79DD7D2DE3AEF651CEE89E62E
+:10A6A0001776AD757C9DC33F1CA2F413B7DE83F50E
+:10A6B000AF12A65FF5480AEAC3633BAFBD07CCB74C
+:10A6C000EB17DC7608D4E4CBA9416CD7107AA50649
+:10A6D000D9EDD4BD9301EF9FD5DE7B4F195DDA71C3
+:10A6E00025DCEEA11D8E6F92D06EB1CEF32AD72756
+:10A6F000AF813C3D17C623CC5E9D4747CBA56097F5
+:10A70000B5352054C8B79202463BD5B7E1F356326F
+:10A7100019EC87D0260FFD7DC2C64FD6835E262456
+:10A7200082FDDF75A83722BC09B373FB7BDC3BB627
+:10A73000D076AF825C80F1893A3654629013762FDE
+:10A7400096478B9FDF26C0CF99CA29B1CF44F350DB
+:10A75000C8E3FA1657B9BBA434B07702D7C17E0656
+:10A7600017B8BC3D14858B15ED1280CFABAFD86CFC
+:10A770006D411C16ED15611F072F0BDE755E19C8A4
+:10A780001F87E6A24B5904CECB85948EAADC3A8C67
+:10A7900057F6DB858F017EEEAD4F0AC830DE9CC0D8
+:10A7A0009B322D2FBE3829007E47795FE1011F1DA6
+:10A7B0007FE942C94B68FF790BC6FB07E8FE5236BA
+:10A7C000D071F26079C76AABC711F243986C066129
+:10A7D0000BA6B0582CF1B2EEDB3C8FB63FCFBFD703
+:10A7E000E6A6A09EF85DDF66271DF78EB6508E3771
+:10A7F0009DDA13E91F743967139295A5F5CD5509B4
+:10A8000071677C540BE5BD0F8AF13EEED20A08F960
+:10A81000992D1C9468FDD48CA405760A2F5F91981D
+:10A820003F6FB3368BEEE7E21B1F5D4FC75FFEDD68
+:10A83000490BECB0EE06317FE90258DFD259A25C39
+:10A84000EE82B22F85F787F55650F955185BBF3D5C
+:10A8500087CE9F21DACF58308FF63D5CD9526DA755
+:10A86000F3FFE8BBDAE649130999BEB0D2ABD1F2E7
+:10A870001319F50B52287EF6124AA7B4FC64C6954C
+:10A880000B60FD3ED9C6C7BF6A33ACBFBC413F0FAA
+:10A89000EA257DE5E65ABAEFB5CE814340AEEB3608
+:10A8A000E8CE2CFA3F2912E363A7A345CBA7B073E8
+:10A8B000ECAB8CE6E372BA19BD16444B408F0D9594
+:10A8C0008B69B9C450CE61E5BD9BC8D5F1E4ED6D8F
+:10A8D000994CEEED4D8E5FAF64307B80C20DF54933
+:10A8E000DA11A2ED8EA3573E4A77E37C079389EEF7
+:10A8F000CC88F1DBE594872B285F12275BA71867CC
+:10A9000098FEC8607287E89767803C5D0843D0ADC9
+:10A9100017A912FABBA42525321E688744ED4B40C7
+:10A920007FC8365CAF5F96AE5E44C7CB4A26E13D3A
+:10A93000F4EBCF2458A6FDB53DEED8782F71BAAF11
+:10A94000290AED84F16AB2734BDB83B171E8BA3B3B
+:10A950009C534CEBB6576440FDE2D29B2719E0397B
+:10A9600089ED83D201F6A3D33C3697F2C1DEBEF364
+:10A970000AC17EFFA945EE96F72D7610DAEECA4C95
+:10A980002E5F02ACBFBF9AC99FC19B53223DC09F9F
+:10A990004EB53464B03B031C1ED5772EBC1FDA3590
+:10A9A000F53948126DB77E4F653619412F367D3126
+:10A9B0009344A61ACAF6A80272A7E98B39F87BF568
+:10A9C0009D2F29C0A7304E80EE6BBD4BCB56016E3C
+:10A9D000EDF1F14F1D725C47D317E9449F6AFC9D6E
+:10A9E000C12936BE0FEB4FB7AFD8783289648E34A9
+:10A9F0009E82F54370B773B82BF1D7395FD02985A4
+:10AA0000B7CD405F4B39BD51E9877194FECB26F538
+:10AA100080BC8FCDBB09C7DF6BA778043BB02F3953
+:10AA2000007671B99DC9CFF2BE0CAF2EC5E843D0F8
+:10AA300085C0EBDE8C964ADCEF22C9DB131CBEAE70
+:10AA4000CBC4BAB83ECD6E08CBD718D627F8818EC6
+:10AA5000BF978F5F5681FCF32F4CFF50BE5901FC0E
+:10AA60000B760BEC438D962CF60C5FFFCFA8EC8099
+:10AA70002FC52383FFA5EE08E80101B7E1F0CF3F22
+:10AA80000D3EC7627D79DF330AECB32901DF8632E0
+:10AA900053B15FF691682AF8B5BF4C677A6D6FEFD6
+:10AAA00054D74CE08B853602220CF60DF66AB9902D
+:10AAB000B764D70B5576FAFB5099CADB00E06148C2
+:10AAC000FE469DCE58FBAACC5D0B3A689D2F89E2CD
+:10AAD0007F12DAA14E62F027BE9DC1E4584598C4AA
+:10AAE000B55B966532BB45C0FB7B1BAAC97B747FF7
+:10AAF000CFA533BEAC18D025C08BE06BAB9C7A8859
+:10AB0000E3F17BFCFB8F9753D269E4D4222EA7D8C4
+:10AB1000EF07A9990FEDB2B2A22512D589AB5E98C5
+:10AB20003A1EFC995B72E4C0FB94AF9648EA981F0A
+:10AB3000D171EB9C018C93093AA923CE801BE04E86
+:10AB40008DA62F41EF2F746119FE805DF269B7C4A5
+:10AB5000E89004D2EA4A12CB21B18E5B72149C6F4A
+:10AB6000D5E6F16961E3FAB89EB83C29FA2352347C
+:10AB70009CCF4599AE7FAD4D36D4BB993EFBD0A35B
+:10AB8000FD3483E2E15589D4E37A2CF6D26F78DC88
+:10AB9000C66A2FD5733BD20FE625F2B10D9DD3ECDB
+:10ABA000AEA408615D74F053B37B09E7D7A8ADC9C3
+:10ABB0004007BFCE286076ED15B4F202CA94CE6A83
+:10ABC000ED7D831C7B1ED6837A213A0DF8F4A50C0B
+:10ABD00062B2F31AE4508104766B76920A7286E2CE
+:10ABE00009E170D045EC2E3AEF73F40B78AB916F1E
+:10ABF0003EE0F0011D486A3B427F07F75B4914F4D1
+:10AC0000CDE57353D06E25A76E1D07F10A7F0AA309
+:10AC10005B3A8E938FE3443AE172EF376327F68015
+:10AC20007E12F253E0819C92713C517F505A54E065
+:10AC3000A5E583FE734BDB25B3FD03F650CC7E5AAE
+:10AC4000BF793EB597A6D7F6466D5E902AB72FB866
+:10AC50009DB6AFA1F6938BEEE78F194C0F1E0CEA51
+:10AC6000722A8C379EEE83FE7428393CA9C51DC319
+:10AC700007B571C280BF2C857EDD8C3FE0DB99C9B2
+:10AC80009091E163DF06FECD4A65ED87E93D5EAF59
+:10AC9000490CDE5B2A999CB0B6B3F171D73AF5DA6C
+:10ACA000AC42A37D1522408776C2EC2C19748F1F0D
+:10ACB000F519C2ABFACE8634D09B9FF52D4D239368
+:10ACC0006272D4E1FCEDD8F7A91C899225DF017EE0
+:10ACD000555E9709D8CB7738185D2AE9616F06FD74
+:10ACE00066A6C4F79B27F2F564825F4DDBDDC3FDEA
+:10ACF0001EC717E7A3BF9D9FC9E245A9397528D78D
+:10AD00000196018AF73432A87B0D784CABB099FCE0
+:10AD100007C71793B1FF99DB0FA509EC873293FDA5
+:10AD200020E6B5DA116FB6E6E0FA45FF1539AFD582
+:10AD30001043FB9564E00E186FE5FA7C53BC289134
+:10AD4000FD3137531AB217F4B8EB524CBFBF49FD6F
+:10AD500045DD38FF31367F6CDE14CA70B179E54CC1
+:10AD60004DCB44BF6F96F7E8F9F4E3A2BFCBA877C9
+:10AD700050FE53FDA4ED70A35EAA05B92DFC24E09E
+:10AD80007F6F1AF077656DA6DFA027793FAB3C3A5D
+:10AD9000C0FDEA035CDFA41D117663724092627A03
+:10ADA00067B8DEE276B1453E9ECECEA674AB1BED13
+:10ADB000806178CEFCAAF6655102FA98F00FB12FA7
+:10ADC000CB6785E512909FB512194F3FD3E799F5F0
+:10ADD000BD9EC9FC109D329CD16F59DC606ED701BD
+:10ADE000EDFCF04D1995DF62D447920C728F8DD730
+:10ADF000CCE92178E2552540E57094DB43BB7CDA51
+:10AE00005D40171DC9A993414F74248F8D405C622A
+:10AE1000C7FF5617EFA0EB1F7CD9A1F6C0B0FB18F7
+:10AE20009D542E5FDF6EA7BF3B7A256F1289ADD38D
+:10AE3000BD41D256533EBE9FCB89261FDB4F932F79
+:10AE4000AA8CA3F3E735B17514F41E90EC0679577C
+:10AE5000D0C8DAEDC87498F4CFA350A6E33C22FC26
+:10AE6000111269AB2983F69A1DCE41F27A258C0F17
+:10AE7000E7B55040507AC853D9F86E35225D3B296A
+:10AE8000B6DF2EDBA249A027BAB25254D013277DD9
+:10AE9000E1C760BF4DFDD128806B7A7F9F1DEC3DDF
+:10AEA000975FDB0DBF8B7D06646F1EC8D9947EB69D
+:10AEB000BE6E0BDD1372175F570F93BF32799E0082
+:10AEC0005E4086D0F9B23615A39E12EDB332B8DEDD
+:10AED000C822E127D0CE225D04F146701F599B267F
+:10AEE000A0BD2FF01AB3AB264E01BBAA686BD4BE2F
+:10AEF0008AF67BFAA1F8F1FA17399FD07D1C34EE5F
+:10AF000023117F08BD26DA3912F8D582EE536AE3A1
+:10AF1000DBAB5413607DE572DF95B0EFA60E8524A0
+:10AF20004931F8BBFCA12320B7F27A7748001B2BEC
+:10AF30009D7564FC50CAA7FBBCF546E29549E275D5
+:10AF4000376D90B5D5467EEE5018DD28E6F33DE12D
+:10AF5000677CC2E305B3FDA163008FE67DDB14C00F
+:10AF6000F38D3BDF51463AD7192DDCA446E6BF34BA
+:10AF7000D53B23B0DFCAE576C4E39A0E2502F2A9D9
+:10AF800069F79EA80DECEC8D4405FE6FEADD732891
+:10AF90008FC227BF499B260762E3E5374524584FF8
+:10AFA0001625C63EF4FFA20AE86D2B7D839D0CF6A4
+:10AFB000CA2117E3FF0F2BDDBA44E1F8A123DC041B
+:10AFC000ED3ECC4D51F5600CEECFED99FFBC4459F0
+:10AFD000DCF3445214BE5DB69E1C276DD7759EA24D
+:10AFE000023DB9FC618F8FC229C31EDA0BFDD37DF0
+:10AFF0001EB58DF60D249129A8AF470987E916BA29
+:10B0000098BE91F1CB5C5FAAB003A7805C3AD7E70A
+:10B01000117614CAAB430EB68F0EC2D6DB99A915B2
+:10B02000C07A883703E7CD6B8A4AE00758E78DD1AD
+:10B03000955688ED47BDCE5E05E4FC1A2E6F2A9723
+:10B04000EF94DE33D041A98F9DCFE6EDDE21817FE5
+:10B0500048EBDB6A7CD89E2481BCD9CDCE29D6D0E2
+:10B06000FAEB0CF245EC238E9CA980F5B9FBFB9E14
+:10B070006572268AF427D66BC5E73C1FB3EF2EA274
+:10B080006602FEAEE8C5013ADEA1C2641C4FF0BD07
+:10B09000954FE7F9189DE7D5EF94209EE04B61F6B8
+:10B0A000A4589F68B7CB5755EB4338F4211CD6D62C
+:10B0B000DB116F623D354A681CF865CBF878CF5CD0
+:10B0C000F1963240CBF7FDF415A4C7B5DD9286FEAC
+:10B0D00042F72BCA5288DBE9FF2E439CF61266A288
+:10B0E00090ED3F7905F5CA257B59FC60EDDE3DF614
+:10B0F0006BDD313A0D9E786625D0D9DADE24E292F6
+:10B10000007F01E4532B9D523983744F7405CFB9EE
+:10B11000A89CD451AE927010FC1421873B397F1348
+:10B1200037FBFD46BE6E316E4C7EBA90DE8327A69D
+:10B130003CE3A4F05CAB4AAA0BF891C39B8E1F457D
+:10B14000394C4821F86B627C2BFCFE99DBED71F0E9
+:10B150007C1BE0D9AA4F849E0D3E5C45E02BF06736
+:10B16000E7701FD2EF3E05D7DBE1B3333D5FC9E2A5
+:10B17000DA1D0EA6473ADA9C11E0EBE7D22F7A5E91
+:10B18000A2F2D293A144E17BD0B6AA09EA0FE6B1BC
+:10B190007574D93615B7303D76870FF1974A987C8C
+:10B1A00062F2E8BE1F3379D2A4BBD17F6C0AD7AD5F
+:10B1B000C673099F4B857309127E5659EA89D1835C
+:10B1C00015BF81270E28015A7F492FE38318DC9889
+:10B1D000BE12744BE51CE2BD33539C5F868300575F
+:10B1E000EAD7B741FC41F8F5A90D21DD1318CEAF20
+:10B1F00099DCAF9FC6FD7A4785F36FEAD7AFD9F0E8
+:10B200006BF4836ECA7901BF825FA8FF68E2AB2747
+:10B2100038BEEFF731BDFA948FD1D59AB25EE4878C
+:10B2200035EFB7201FB96B993C71F79BE52021776B
+:10B2300073FB602B8E5393D27B910C7EF2BF4ADE60
+:10B24000769278DD37482DFF097932640FCFDF38E9
+:10B2500045ADFC720A571787016FF76B1FF3B73EB6
+:10B26000DC4511017C696F5146B2874F372E89BE8C
+:10B270002601BED770587FB8BBFAC23F409C7157B9
+:10B280001AE6B37CB07BC937FF40FB7FB873AE0AC8
+:10B290007ADAD71E42FA19F4BB54882752F1592B97
+:10B2A000517A68EBFD55EA4C382F7BEC8229203728
+:10B2B000DFE57C79E2C7F20680CFA67F7B7C0ED4E7
+:10B2C000AF894899603F7EB8EB5FFF0A7AB171E7BA
+:10B2D0003ACC4B6B7FEC976897DB223BD8EFBBD225
+:10B2E000D0CE3CFEC8B63900F7F6DE76AC3FF1C8EA
+:10B2F0000E2C3FF36F8FFFE22F60778452556877F3
+:10B30000E2C7DBFEE92F40E775A92AECA3296C67A9
+:10B31000E7B982BEAD726BCF01E453412F9780DE57
+:10B320000538D533F923E8F95D7EDEB4AADADD0508
+:10B33000F2ECDD2D9EC6787146C5CFF002B11894AF
+:10B3400063F512C6D9BA28D540BCA32B9954C0378F
+:10B35000655254C9A7F35CD1B0670EDA3DFA3BD70A
+:10B3600043FB25FB5C640BC6E520A84BFD0124755F
+:10B37000424AA8183C4AFD663AFACE2F29DD1EA69D
+:10B38000F201F58EC51F58D2F5C2FF801CAD730EB9
+:10B390001C0051287EEFE2F11BDA1EF54EF9FAF897
+:10B3A00071D254BF9BD32DD39B797B171504504E7C
+:10B3B00024A9E30DF6E998232D5B203D29AFB1EFD9
+:10B3C00022D8C7C5C5D74C45BA80F81FE81FDD8D08
+:10B3D000E3AF85F825E5BF73FC3C2EE225BE19746A
+:10B3E000FE1A3BF1B9E14BC86B0E94238FE2B8D43F
+:10B3F000FE40BB2AF0CB2B1E057B64BB239C3B0D80
+:10B40000C6E9E27A6B275B37EDEF8573543A9E7796
+:10B41000C6141CA7CF9181FD75D67FFECE3629B606
+:10B420005E4AA963416FC178656ED0337A3DE227E9
+:10B43000A0E0BE4E40935CDCF7E4152531FEB5C6B6
+:10B440007D409EC1F9F06C7F65857F5AEC2BE2410F
+:10B4500056786EE4F53FF36BF825BB324D7A2591B3
+:10B46000BDF2CC151F33FDFBB37750DE34031DC393
+:10B47000FCE1F74DFAF75A41C74FBD83747CED3EAE
+:10B48000A67F9BF7952A40B71FB46AE43D6A8036D1
+:10B49000F3F3D7EDD2C0F598EFF294CB0B71BD8FDB
+:10B4A000B9BE59B3F59DA3706E5AB82F17FDFC8F26
+:10B4B0009F72D5C338076D3684E7C19EF377B44BCE
+:10B4C000C67532BF80DAC148AACDD44E6576F0EA9F
+:10B4D0006DE0A7AD6D242AF07FB3857E9AF7BD821B
+:10B4E000F422ECE0E0C38B5733FBD3A5BAC08F9BAB
+:10B4F000C7EC5142ED51689F3E2FD2A6207D959614
+:10B50000037D3D73C52F3A418F37CF235E187FFBF4
+:10B5100018EDA97CDC8F4420CF65BBA3BBCA4EFBD2
+:10B520006FAF0978292429DC76A2DD4B8A15AEE7B6
+:10B5300056A3BDDC9C73958A7C6695074FB5A1DD4B
+:10B54000D51C48C6F55CB24FBA85D9236EC2D62F3A
+:10B55000217D5E12991981F8D9471C7E028E1F3B0E
+:10B56000FA56023C3EFE0925445A7FC93C46AFE9E3
+:10B57000F37A518E3CF7D47CD4E3822E3D4F26A142
+:10B580003ECFB07B2515F5DA9224235EBB1D4C2FF0
+:10B59000A5733D53B495E1B793F353A7DFC6BF8AB4
+:10B5A00039FEE2D52783DEFD88E31FC508C8772E64
+:10B5B0004FD6AE8E223F35ED66E3F992B4D25B0DE5
+:10B5C000F4EBAB667A519C07C0F9C0A238F2E231C5
+:10B5D000BE8EE0C3ABB681BD7C31C53BA894BC62D6
+:10B5E0002E47295D00DCF21A43480717FB6E5021F5
+:10B5F0003FD59F49D05F1C6C5348BCB8CFE35C8EED
+:10B60000FA3343651087F6677BD0CEF1CB953617BA
+:10B61000F42B95D49E009E7BA29D37E8CF557B4CA2
+:10B62000FC1E2AB3D176C7B23C0CCF91DFD8179756
+:10B63000001F06D8B816BB6FB8DFCDECC685DDFAA3
+:10B6400064F043C4B9868043A42DB9DE283F7FC28D
+:10B65000E11099C8E2A9D4BE77635CDB4BE701FF38
+:10B66000BE67E623CCBF6FC7760FFB997D5443F7C7
+:10B6700007769BBF28B49EE9538F1A0F1EB3FDC2F5
+:10B680002E5F590A7E65739D5B057EBBEF67D22AEC
+:10B69000A467081682DF1D5E8D7820140FC00F246A
+:10B6A000CCFCD2E69650243EBD2F42FE6B06FE93A4
+:10B6B00090DE310E4FE93DC2E89DE93FE1FF837C1A
+:10B6C00034E61D0A3920E44BB3323001E858F04328
+:10B6D000F39C810900B7D1CA938F1D94FF817F2805
+:10B6E0001C807F04BF789E667CB2A52D5009F55B57
+:10B6F0006A88B7DDA08FACFE12AC13FC4E21D74F89
+:10B70000FA42C7FD1007B0453B21BF42C8E1E6A79A
+:10B71000374F8897FF26E4B0D3CEE49B339212696B
+:10B7200037D0179CF979A6E017F3795236C48F8F7A
+:10B730009CF2BB791C7F74F91259A0CB41DEF4A4B2
+:10B74000605EBB881759C7FDD82F99E232C26F815E
+:10B750007307689F93C5F827258BF3679688CF46B4
+:10B760004CF41FB085DF813CA344FA4BF4FB5BC56E
+:10B77000AFC43C428F5AF12FCE4D603F8B26256ED1
+:10B78000D77D80C9272B3D4EE47C72147C0FDAEE06
+:10B790003FF839D770FCB2714878A2292FAECBB6EA
+:10B7A000A7315E1C4C9C779087268E2AEFEE402BAB
+:10B7B000CBAFFA0F9E674B564F34E559B9D5401BB6
+:10B7C000C451AB9CC15219E765712CCF1CF209E83A
+:10B7D000E1C9FBBA8B217FC91F329F9764D7279B92
+:10B7E000CE2372C319A6727E639EA9FD989642531A
+:10B7F000FD391BCE33D507F529A67251D70C53FB63
+:10B80000F1DD55A6F2B90F5C6C6A3F31B2D854DE57
+:10B81000D2D65B0F78397FD795A67E5576AFBD948B
+:10B82000C2B5A47795397FCC02CFB4BFCA71E9B055
+:10B83000292B8878ADB29BF3882FD8678607A4CBD5
+:10B84000019C27133EDE9C635346CA6F9D4CEC7FE0
+:10B850001E10FD83C3E9813807D4501C3F53D0B973
+:10B86000285BCFB584FC3853FA4BB44E417F89EA4C
+:10B8700013C1ED3B9CFF055C1C4370A95747828BAD
+:10B88000E3747021142E9EAF0E17EB789B529A3101
+:10B890004FF8352818ECE38156F37D98657A1AD372
+:10B8A00043A125A7B1A3591C389CC4CE2BADF5FFED
+:10B8B000C9E1F2218509E261947CFD16C7437F222C
+:10B8C000BEDEF0C9C16C90DFB504FD666F4BDB27AF
+:10B8D000A0B7AEB64709D0FF7D7C3FDB79BEE80359
+:10B8E000AD5E1CE7417E1EF9506B007F7FB8B51836
+:10B8F000BF9156157FEF69ADC0EF4E6ACFC1F70714
+:10B90000ADB5F8DDD51AC2763F6CADC7EFEED630D7
+:10B910005BD7307C9172B473429971E3A5D7E8F29A
+:10B92000A8F044E482B8FA32E13872C388F9E51B22
+:10B93000FAA5C79F35F0EF5B591EDF51C86D9C4ECD
+:10B94000A6C3F9E6E9FA7FDE4A1E7F76FCE8F948ED
+:10B95000D013399539211E5F87795EE563DB57DDAA
+:10B96000A54F4A0CAF189DC587539DF3E33C70D695
+:10B970002783CD60E82FEE9F88725D382DAEDD9075
+:10B9800097CDF46E7D123B8F5F6EE1EF6F6533FAFA
+:10B99000FD5636D377BF4B2067D2793D5DA703CFE5
+:10B9A0000787F1DD3DB3E3C1F7AEEC80292FC57AFF
+:10B9B0006FC53ACEEF1CDD63D4387C76BA71C4FE15
+:10B9C000ACFDAEE2FBFF663661EBFF7FC69FBFBBFF
+:10B9D000CE83FE03C0CD6FD8FFEFAE4BA98F179774
+:10B9E00069CF66E7A1D43A27C10C34F575056CC55B
+:10B9F000621260E7BEE3BC101F12790189E9D58E9F
+:10BA0000712484A13C1CAE141F01A5888E6F1F9A5F
+:10BA1000276A8779545B4CCF42AE0D31DCFF9087AB
+:10BA2000D303EDAF2B98D7339007EB3B537A22F239
+:10BA300043E3473AA71BD6FF0CE5CC9AECBFAF9C7B
+:10BA4000117C4E4EDD3B3E9E9EAC87B967507BEC31
+:10BA5000FE87989C39CDB8670ABF7A7900CFAF4787
+:10BA60000DBF7DBE51C5A53E77A54E26D4AFDBE008
+:10BA700064DFDB93537BE0FBB96B6C84A4527E8163
+:10BA80007552BED5AB08BBBFF596F09B5AA683BCDA
+:10BA9000DD9E1B7A309B8EB34A61FEE29FB2B4EF0B
+:10BAA0004339999F0B27F37361255BE98432D18A6F
+:10BAB000715F17F07D75DA0263615FEF4BEA44F066
+:10BAC0005BBCB6880ADF54122D61F9799130F86BAE
+:10BAD00099E72707C0DF4D9E40481FC6C75517C4CA
+:10BAE000D19494C117C701FFFFD286F7A21FF7B206
+:10BAF000753EFE403E9EB350818FF26232FC4EB7DF
+:10BB0000B205EC72DAFFFB52F8896CBAAFE35EA7BC
+:10BB10006EA3EB9ABCF9BD8C0CFAFBE3FBABF05CBB
+:10BB200021BA4BD615B8DFD0F7E1772FA1E35DD06E
+:10BB3000E7C0F8F3054446F9BEC64EB6021F25829B
+:10BB4000EF07DF889F07E6C8914CF95DD6FAF7B991
+:10BB50001EF82041BEF16BBC5EE4CF3844FE8C5F22
+:10BB60001B317FC661C99F71D84304CE851D43F93F
+:10BB7000330D04F367E838C6FC990FAAE2AFA39F20
+:10BB8000CB73C7172909C64DC5DF3F281C799F8E87
+:10BB90002F5CA67CEC587F37FE9E287FE73301A7F9
+:10BBA00004F94B9F0CAD2F97E899C67E8CEF62F39A
+:10BBB0001460BDC3920714AB67F93F1DE98C4E0EAC
+:10BBC000E4787DD7D0A1AF2103789FF36AB7CF0186
+:10BBD000F1A41051F7E0FD1EBB637040F06121B489
+:10BBE000B3BF0B76B78D4A5EB0BBAFDEE07877C0EF
+:10BBF00020B71669E63281F60639BC1862D8741F80
+:10BC0000C9E71563FEDFA72490E61D418E3638E5AF
+:10BC100090DDB08FFE0476C4859C0EFB73E3C3AF4A
+:10BC200030C766CA631ADE9FE703F07B68B77A47BE
+:10BC3000969F00DF70A6717C2B1E7C587F3A38FBE4
+:10BC4000E1B00DE26A9512CBF3FF9BC33B9DE7BBCE
+:10BC5000B1FB030E4BBEFAE25CEBBA59BEFAFDE94A
+:10BC6000A19939D82F30C1785F60AF5D4B9942BF41
+:10BC7000FD5CEE58E1B289C3D9BAEFBD3CEF3E5945
+:10BC8000262D7B0CF0B7EEF71B398CCE45FB0E074B
+:10BC90003BCF02C1E7A4726F0561726F454E21CFA1
+:10BCA0001F4FB703BE1AD8106485F7109E2F0938AE
+:10BCB0000F831F87BB158E21125809F9DDA783E773
+:10BCC000865C6D450E9DF79A57921590FF2B9D83CC
+:10BCD00007C1671DE8B31D1E47BFEFB8C71DDD498B
+:10BCE000E03CAEF8C967E837B542657915641EDAFD
+:10BCF0003F929E2F7F79FEE8ED9FCED47031F0C742
+:10BD0000FB3C3F5BE8A5CEBC131320CFFEBD8CCA25
+:10BD100029B97E8CC36B9940473F4F6274F4001D74
+:10BD20008996D7FD6222DE87BF2A37AC423B91E776
+:10BD300047B4C109909770A670A27F1C4047A783A3
+:10BD4000D39A1CC2F831353E9DF4E4B0F8DFE9F82F
+:10BD500003EFA195FDFDF843C0539C6388F5A9B995
+:10BD60008C0EC557C0CD9A4FA4E6DA783B96AF78D3
+:10BD7000556E08E17C72CC27475D74EDFD4AFCF7F7
+:10BD80001D9E1CE5FE05BCFF5E72B83F39FEFA5EE3
+:10BD90004CC0C7FFA8F54DCDE5F43339FEFADE1EE1
+:10BDA00025FC4264F0ADF4BF831EA3789E0A78267A
+:10BDB0001D83281FFB33E2AFF3AFA35E67D8F1F713
+:10BDC000D0B782BE897E4D239EDFE724C73DBF5F8B
+:10BDD00046FD29F087ACE7F8E2BC9ECA0FDC6F9DF8
+:10BDE00073706526E07D1EDF771689A6C3F9E62FFE
+:10BDF00092F03C60989EE4FC41E195920BFA64E17C
+:10BE000020C635FA27C4970B29B98CEE86DA77B1AC
+:10BE10007912DD43C8CC9546750F819485311E5843
+:10BE2000E97447658A875B383E94FC9B54B00F2BBE
+:10BE3000735E3A02FBA4F0FF70089E86FCBE13AD51
+:10BE4000CF7BC73912CBED35F213E52D71F63321D7
+:10BE50002B3C21D7106F5CB3EB05EF3803BE4AC80B
+:10BE6000808DDDA31EB499FCE46C72467EF27E17D1
+:10BE7000E397F73242A80F403F80DEE97CFAC252D6
+:10BE80004026D81990DF33E8494639DA9E37A3387F
+:10BE90006080676DAEB02FE50476E3D7BB1F10B3AB
+:10BEA0009B2493FD1A1BDF8EBF0BFC54BA5F8C8B57
+:10BEB0008F0959DAA500CFBF646897C1D70A3FFD43
+:10BEC000CE59E978FF00E0373736DE10FE13E0F98F
+:10BED0001B595A3DC04DCD0CB0BC0191D73714BF92
+:10BEE000B07B8F3A63F01E2D5E92797C8DDA0DABBC
+:10BEF00061BD4A12E747E2C67BE4C26E2116FB86AB
+:10BF000014337F7745CE4BFF03F19FCE54C6B29DCD
+:10BF1000FFE4423FF06AC9ABC0BEA9FDF1E6F76994
+:10BF2000FB3089BEF92DF40F859D91227F9932FA5D
+:10BF3000750AFFF97479D6CF803D46D7536573E310
+:10BF400079E733747FB9546E5429EC5B399F5215ED
+:10BF50001DAF4A2ED83F40D7F51939953C9B7EBF7F
+:10BF600043181CD6BFF2870CF047ABEC8E1346B9D2
+:10BF7000658D7FDC956B8E7F7C4616FEE67C80CBE4
+:10BF8000AC0C84CBE4A7E6651BE32F43F10FBE8F17
+:10BF900025FA354C9E5AE49C906736277B6F84685F
+:10BFA00024E0CDC2381283BB2EE1FB57B345199C68
+:10BFB000145A9EC59124417FBAEFD9FC4B56857324
+:10BFC00040CE405A0FCC47BDBF1CF8B65FA806E074
+:10BFD0003B570AD9D93A222C0F91B414407B9B735A
+:10BFE0004086F945BC02579205E3887959D9C3CBFD
+:10BFF0001D759FAEBC2E303CAE41DC1EB47F15BE1D
+:10C00000BEE35EB76E33C43B92DCD1E398BFCABFD8
+:10C01000D6B8C7EDB2AE43FE7632E94579E9767F10
+:10C02000A40330BCC42B41F9FB52F8E7C017479575
+:10C030006E12A4BF9FFCF9E704DF65831B6245F025
+:10C0400035EB27BF7B3DE645FB43768B5E0A4BC055
+:10C0500047D9F5D6DFCDFACA49FAF1FE90140DE5BD
+:10C060007C9979FA784EA2388EA38AA17EF0466632
+:10C070000F1F4E66FD0F27B37E6F71BDD49CA110BC
+:10C08000CC8BC9723AC19EFFD8730CAE6C823EE96C
+:10C09000027DE274688857A157D6EEBD9900DE9AFA
+:10C0A000F72D4238FC5E62E7A4FA0A09F319C4BB13
+:10C0B0000FF593C8CBB4279991C7FC94A5CF8757A8
+:10C0C00034D172DD4BA4244ADB95CE0DD5C0FB2EB6
+:10C0D000ED2544DD44CBEDAEF08F7E02FB7885BDCF
+:10C0E00037B68EDFABA59858B39B8EBFE3CA31EA53
+:10C0F00016D852F56027E40B0D6E265EC82F194640
+:10C10000BFA7283F507A7804CA74DDEB5687FFE555
+:10C1100036DA3EF725A2621B5E0F3E0AE04FE2745C
+:10C1200001BFCFA5BFAFE37454B45F62E7FC3EF636
+:10C130000E180E0EEF7439D9FFAEDB5F79F934BA01
+:10C14000AEA2BEA948DEE3687BC883824C04D69EBB
+:10C15000D8E2B51F07ED0370AECFF043F2147C3F79
+:10C160008970F937DDC2873363FC80F5A5BCBC8ECE
+:10C17000EB2913DFC038D46FD7CAD9B13FF6F331FA
+:10C18000FE5089F8C3F8790689FD8171AB63F3A08D
+:10C190005C9EC7EB0E2E5F80F9DFD3EDD103C0EFBD
+:10C1A00033F9B7947F81DF9D148E57D85B0EFAE97F
+:10C1B0007ED23710B50D666908B4C37865242403B0
+:10C1C0009CCBBD9BDB617D1736BC9209F475735E19
+:10C1D00011D2DF2CA75AE4A224D25EA1AADE2278D3
+:10C1E0006F4C42B82CAD774620CF6DE9D07B3FE154
+:10C1F000E032CA3F5784257E0F3F1C6C30C46D452A
+:10C20000FEDFB224EA5FC791DF37E731FD2EFAAFD8
+:10C21000E3F75344FDDA3C37CBCFCCBB68461E9ED8
+:10C22000C7B0BC68CAFFB3F3A6C5E40A9D17F356AE
+:10C230009610CD01FB5AC2F957F0FF52ED56B46784
+:10C240009786CC76E9EF25866F7DB98476E215F581
+:10C2500023DBAD0BF3C4B9708117F500117A8AD1D5
+:10C260009590E78B41BF831CAEA5FADC603737DCC5
+:10C270007E2A1DFB65FF60ED97E7C4EEC3ACB3DC1F
+:10C280008769E6F761D6ED6B736401BDF3FB30EBB4
+:10C29000F6BFD369CC0314701A7E1F6610F31F9784
+:10C2A000299103704F68D94D748FB4FDAFF8FD89A3
+:10C2B00067E1FEC494181D79AE7445597E9D867958
+:10C2C0007E05DE1415F252BA6C5330AFA82BD5A3FD
+:10C2D0001AF378B6B4B5D4403B914F24EEBF2C4B43
+:10C2E000706EFCCD3C663F6F97585E97BEDC89F060
+:10C2F000F6CBE488F19EBFBF2884F97433F202388C
+:10C30000CF761E5F80FCD3A9F41BA1661AC317EB7E
+:10C310006F950F74BC0E18AFBA48C53C9AEA3496B4
+:10C320008FE6CF0C95DE3229366EDD7E96BF57172D
+:10C33000FAE410CBC35D5406F04C24D7ADFA8BD28F
+:10C34000DF3D408FC3F556B819E8CF51155A7E1D11
+:10C350001DF7E4CB0AE6DB918D9AE4A0ED7EFC822A
+:10C3600057857B781D95A14535586FC77B8259F558
+:10C37000249A44EBCB5E527A20CFAF91742B304E8F
+:10C38000A3458FDDE47E56013EBD69A72346970491
+:10C39000F213D52210784DBB87C545500E09F964BC
+:10C3A000A56732CE2C874A85DCA5F281E5F73530CA
+:10C3B000BD477E20417CE8A4E798CCFD6B947BD3FD
+:10C3C00084B0B2C8FB69FB9F437B46C0730E9517D0
+:10C3D000E0C749F0FB64EC87652A4F8B21EF742698
+:10C3E00049467A1B6647F0F5950DAD9FD94D424EF3
+:10C3F00056561002EF2358F143E7433A17E77D7092
+:10C40000B402E70833F9FC9FDBB449D120E08B4448
+:10C410006C14CE9D520BEA1D27E481D2EF16298CB5
+:10C4200072F1A7BA2E035C2F242D4B160611EF2FA5
+:10C4300001DE6739FB52000F4715D509F5359030FD
+:10C44000885F33BEE6BBEFB303BCE6E758F1A2DB7F
+:10C4500001BE0B02C3F085F70BB404F8D2845C2153
+:10C4600066B91224A7D8FDE6CD876E03FFF874F6EF
+:10C47000C9F7B2C247E3D1AFB05312E5E59DE4F28C
+:10C4800078B47979271DCCAF984106AEDF2D0DA782
+:10C49000938F0F6E90730CF424E8F4699EA72FFD20
+:10C4A00092E7FD967950FFC5F425A383725E9A0149
+:10C4B000F465A083D9FB5C5199EEB394F79F01F426
+:10C4C0003025A62FA33677402904BCAB5DB23CDCF7
+:10C4D0004ECECA0820FEA7DA34C4FF34EA8171BB0D
+:10C4E000D39D4FF75FE1EC6DB70710FFDF07FFA6A5
+:10C4F000920410FF9516BD53EDAEB3039D543BADB2
+:10C5000078D610FF35DE61BFDBBE0AFECF01FC0B23
+:10C51000BD320AFB94E27F42FE08E78D89F07F413D
+:10C52000BEFB8CF23205FEAD781772608FCB5BEDEF
+:10C5300086787023CB4B9EFAF2B8762867AD0DE271
+:10C540007D993DE9EAAFB0BE85D597F56932BCCF9C
+:10C5500058B49ED6D3F29E60A81ACAEB3648284734
+:10C56000A7BD166E87F2B88DACBE7453CBAFE09DFD
+:10C57000B3753AEBFFF4F14E7CAF22D2C9FB57768C
+:10C580005743795D17EBFF478F5307BFBCFC48A4A7
+:10C590001D7E9FB895AD43D87D7339BDED919EF852
+:10C5A00015F6EB66FD6E38E44C66FE12B3E3E6F07A
+:10C5B0007DCE7D88EDD3F7DEC5B5010AF7EB0675B4
+:10C5C00007CA0D5B5339CAD1047E5AA5D45D00DF7A
+:10C5D000F9544E10C43BA5D34296B7DA43A75893FB
+:10C5E000CFEC2691EF0979E78B0CF85A93CFFC0832
+:10C5F000D12E2B83B0FCE407D9BBB3221F357A3F81
+:10C6000091207E007B44FD9B203F757E510BEAD339
+:10C61000F9E788BCD401FB2A3A6FE9977FBA289ED4
+:10C620005F7E4B3EB3938EF13C7AF17B63246803CB
+:10C63000FF640F100FBE03147D19EC963DF0BE9100
+:10C64000E11D923D4156D6F3F7DFDD459DDC1B6CC5
+:10C650002D761D94C05809DF55B9AC8F44D352874D
+:10C66000AF7FBE9D4459FE045BFFF5ED4ACF1683B4
+:10C670001DBF54888F59E351AFD4713C09B9B194AF
+:10C68000E38BF2F9E67CBAFE65CE16B41B9713A6CF
+:10C69000D76F24118C6FDC68E1F335EE3FBF65B3D3
+:10C6A000411CCDCCCF6BE972D8F9FAE0C3BFA3F03F
+:10C6B0006F7CC0E305FDBFB6D7DCAEF181978F304C
+:10C6C000FBCBCCEF8D82DF23667EA70605E3F7FB6D
+:10C6D000CFC3731B713FD0E51C7C4B27B1FD0EE926
+:10C6E0007D0BFFB9E0BE6031F8353696A7C8CB6246
+:10C6F000DE4FBB995ED6A95EE67E108ADC4FFB2F2B
+:10C70000C17CF852A147B99C11FC5CCAF5FC303DD4
+:10C710005E6BF577EE433E99CA4B56FD2DF4B6B8E5
+:10C720008748C745FD4DF5F5CB1A5D6F9FCD1D01BF
+:10C7300078C7F47604F9688A93CA6B1BE2EF00E0CD
+:10C740006F1AC75B3BD7EB09FD03F7FAB8FE01F59B
+:10C7500037F01C61B85F1035D9FBC3CE3112D8FF5A
+:10C76000437873517B2A05FC7DC2ECE23C32AA3C43
+:10C77000112AB7DFCC1F416F2BCFB0DF0777B8305E
+:10C78000BE20E2EC82FF5E2F6076F8B65CED3D9055
+:10C79000FFFD7CBE7E3E7EFFCDF3F1FCFBCF44C3AC
+:10C7A000F36FC867CA8F937F01E7DF1D8678697FC3
+:10C7B0007AFC38F8275CFE941610FCFEC9AF7D0A9F
+:10C7C000EB3FA6B038FBB164FE4D65E714FF3BD4E8
+:10C7D0009EC98F4CFE15EF911FCB30C7E7453B3FFD
+:10C7E000FFBEDFEA0C7518E2E181FB935A408FF936
+:10C7F0008B785EFC7A46C7279F4ADF617C272E50E4
+:10C8000050595A300DDA694A2EC4679E62FAA2D98D
+:10C810003EA0C0FB3E3E7F38A5C00FF79B88F604C4
+:10C820008C1318509650789FE4E7FE27F97B402739
+:10C830005DEC2BD6152858540AFD4EDE3C80726301
+:10C84000A8BC6800E542A02084F39E5C2AEA79F93E
+:10C850006E5626DCAFACE47C8271E33871E2E171A4
+:10C8600061F37B37EB94F8E7D5A4C0638AF7AED8C1
+:10C87000CFE2902B9DA4339FD65FBD3F1BFD8DC69D
+:10C88000547D02D0C3D78DE39E1CD387FBDA523987
+:10C8900038F6C1323C17C678D1DAFDCFA1FC5B2B4C
+:10C8A000F866AF996F66178CEE3CC51A671F053F97
+:10C8B000CD2F18C10E7A12F4972386875B787E53AA
+:10C8C0008DDC540D71A54F5713BC677BCB0B32D257
+:10C8D000D52D3F92F0DD0961C7ADE5704EB42FB89C
+:10C8E000A71030C815B8A71030F875704FC158861A
+:10C8F0007B0AC6F6704FC1580FF7148CF5704FC104
+:10C90000582E25D7B6439C6E5D17F14602ECDE82A9
+:10C91000B13FDC5B3096E1DE82B13FDC5B30963FBD
+:10C92000250C6E9F3E2463FC1FEE2F18FBDFF0C228
+:10C930008FCBA3B06D17CB536B7751F8031DEA5A19
+:10C94000DF240A9FD51C3E70BFC138EE07A9173DF2
+:10C950000FF859DD77FD42F85EB0EF26D3B8A49BFF
+:10C96000C9E316FA17E0783D09A5813F37850C1E0B
+:10C9700082784773445261DE1B1E30CBEDA1F74C29
+:10C9800022E6DFD71043FC37383CEEBFA5C0E343B7
+:10C99000BACA2379C6784F8C1EDC6A14E0F09AACD0
+:10C9A000C6A38752726E1AC6799E97218641FE48A9
+:10C9B0005AB6CF920CE703167824E598E9C21530F1
+:10C9C000D3454AB1992E3CAA992ED22ACC7491AE65
+:10C9D0009D37227C336BCD74B2466E42BE1770AE6B
+:10C9E000A07F01CE53E0854A802FDD27C48BADF0B8
+:10C9F0006DDCBFAD13ECFE3385EF9316F87E466613
+:10CA000055BB03585DE72C8FD93165CFB7E021B016
+:10CA1000357E2AE028EC081107A5FA1FEDE9985F9A
+:10CA2000CFFC3D6A1F1C2CC0F303E6E7012581DC27
+:10CA3000BC8E84513E5D67B10F6E70DFA7807D3084
+:10CA40006CBFD43283F70BADFB057B8B18E25256DB
+:10CA5000FB40DA2F453D9361BBFB859C0E7F89C669
+:10CA600090268D466EF47AB4FF02B9058EA2B3DC2F
+:10CA700014378E6BF7897508B888F993488B9C0337
+:10CA8000F45C6CB5CFCCFEB5F0C745BC5DC4B585D4
+:10CA90003F2DFC182B9CE57382ED40FF53BDC28FE8
+:10CAA000EEBB0A7E17FEB3D56F1DBA170090857BCB
+:10CAB000373C4E7FA77F9593BDCBC7F84EFCDEE990
+:10CAC0005B9C36523EE61DADE67B30741BDA88F780
+:10CAD0008A00645970EE4420A842B65E7A6800DE8F
+:10CAE000DAD97AD98B83CFD2EF96921F0C6C82BAA7
+:10CAF000535FCA00D7A1783E61F78415DE4F29E85D
+:10CB0000BC19F468B26A27EF1AE8C24935D5BBC52B
+:10CB10007C5ED0133943F5BF319EEBFFA3BE775146
+:10CB2000F8BC3B7E847A456D8C67D759E1259EC35E
+:10CB3000704DBAE838D8272E62D837EA4343598E69
+:10CB4000C10B55AB8CF7A644BD06EF977CDD7D018C
+:10CB5000DEDF7518CBD157DE7718D71F617905F660
+:10CB60001081FC5BC547EB8DFA65880E2943951B48
+:10CB7000F6378A7D01D380FBC9EC1286EFBFD5BEA4
+:10CB80003A2CF88271435967F5FAF4B37C7DD1B33E
+:10CB90001CBF64D1D90D3F6DD1D90D3FFD2C5F5F16
+:10CBA000F42CC72F597C76AF4F5B7C76E3573FCB95
+:10CBB000D7173DCBF14B969CDDF0D3969CDDF0D39F
+:10CBC000CFF2F545CF6EFCEA6807BA2BA204DE97D8
+:10CBD0000874103518A0262BFD19FCF92295609ECB
+:10CBE00006E17E4921F74BB66D6DA90717EA115D85
+:10CBF00009603C88FAF739B47E2261F58F742DC63E
+:10CC0000386BDB980979F05E95BBEBA2E3707F6F20
+:10CC1000A2CEFC71EBBF1BB64833FFFB6B9757648A
+:10CC20009ACAD3FACCEF575CD55864AA5F1E3EDF90
+:10CC3000F2EFE74D35FFBB64A19996F7206E26C64B
+:10CC40007B918524AA427CA5F06E5B159C9BD9C183
+:10CC500067BE90FEB753C17E1AFD6BF45F0AA92729
+:10CC600034347E10E0A698C6775BEACFF41EEAFE65
+:10CC7000B1F1EFA112786432CEBD736B1E26B1DF25
+:10CC800088F13981AF3B37DBD0E5FD6C2BC1771ED6
+:10CC9000AB23011BBE83CEF1763E273DB1EF48ABFF
+:10CCA000F93E7AA14EAA009F451DC406F1B5E04E9B
+:10CCB000A26A04E34248278FE8F1E9E411E2AD8279
+:10CCC00077B91E8910FC77B2045DDCE908E4C1B9CC
+:10CCD000DAF95D8C1E049D04804E52212FC8FAEEB5
+:10CCE00080155F644A94AEF591AD8519C67C54B247
+:10CCF0009BC1DD49FF8E84AFE29D667C0588A1FC67
+:10CD000015F0F5E9D7C497E20B45D37C10CF240189
+:10CD1000C8933A3866820DE011EC52D1FFAFA5CD31
+:10CD200000CEC12EF69E9AC093186F6B2B89CE331E
+:10CD3000F87F4135AA019C6BE44955907FBEA30C56
+:10CD400043C6C3F0B383789321EEBDA3CB968C6F1B
+:10CD500054EFA3782921E4BF372F4B2BA6F53D4193
+:10CD6000920CEF6CF5B4D9F0DDB29EA7A47AF3BBB8
+:10CD7000CAD1245B0EEE23C956815F3BFB6AFC4B94
+:10CD8000ECAC3E2A4379ECC661EF7EC8509F5E6BE7
+:10CD9000F97703892641FBE473581E679A667ECFB4
+:10CDA000C651619607148C7D39E5106FE1F4CEDF32
+:10CDB000498DD490C826BAEE73B8DCB1D251FA1DB1
+:10CDC0008B9198DAC67C03E5594F9B82F077707996
+:10CDD000453632BAD0E95FA0A7740B1D7954331DD4
+:10CDE00039E402CCC3157C25D623E66F1B93956CE2
+:10CDF000C775D9F13D6C87554E58D6E7866020C57A
+:10CE00009DDB4722115AEFD0197F10B91F7F774C55
+:10CE1000272433F815D6F935E553E89CBF8D7CF20D
+:10CE2000F031EF9CC6F6F999CADEB5AEEE60F4EECD
+:10CE3000D9CAE81D6E74B37C2D6D61AEE15C752FAF
+:10CE4000975356B879FAB46AA0E78BE49734C88F41
+:10CE5000B8FB3546FF6D630E3F0FE5AD7733F8073E
+:10CE60005586674A2F6A942EFDEE3BDC98173CB539
+:10CE70008CE20BF0FF92599E4CEB33C3B1C82237C2
+:10CE80008209E06AE5D74470FD96806B39856BD1E5
+:10CE900099C355D1997C4E9FC5DE593C384661FFF8
+:10CEA0003EAFCEE098AEA9287F2F924F45D368BB06
+:10CEB0006D1A9537749DB51A83B7779690E36678A7
+:10CEC0000AF922E05FC8E1EF55BD2FC0BFF3E2D6FB
+:10CED000ED2420017CFF5B033BA27B9A9037830407
+:10CEE000F096A631BA1570EE9ECDE05CA871387749
+:10CEF00071B8494402385BE9D52A9FD3BE269C7796
+:10CF00009DC3E3F159A4FCABC0795B0A7B47D931DF
+:10CF10008EC1D5E11E8C829CED0ADA715F07820A10
+:10CF2000D67795B0FAFB5356E680BEEDF277E60071
+:10CF30005DB605AFCF01F9EECAE1728668EEDCF2AC
+:10CF4000D8BD831A792BBE43DA1950103F9E407C1E
+:10CF5000F995362BECC47926D9898C7078488D07E1
+:10CF6000076799629297F98D66F8A658E0EBFA9AEE
+:10CF7000F2E1B5AF291FEE216CFD778E17EF347407
+:10CF80003B513F55DC8471F34C3ED7E685DF65BFEE
+:10CF900073BD66F8BDB610E489DBAE023C13ADBBD1
+:10CFA000A795F0F75A9CFCFD16F6AECB3678D785E0
+:10CFB00096BF03EFBA2401FDB3775DB6C0BB2EF474
+:10CFC000DB05EFBA9C0BF6B4865FF9D2427C7FF0AA
+:10CFD000B35A82F1F14D297F25F1E055D465D67F12
+:10CFE000413DD9F20E9B59CF65CCCB3395BDB3CC27
+:10CFF000EFB67954F66EDBFF0164680340008000F1
+:10D00000000000001F8B080000000000000BDD7D09
+:10D010000B7854C5D9F09C3D6737BBC966B3B9924C
+:10D0200040124E42081B0861810483829E84406343
+:10D030004D71435151A88D40314248285E1A7FF509
+:10D04000C94282841834A0585A2F2C378BB56AB441
+:10D0500051A922DD2052FAD5964551F152BFF55221
+:10D060002F40258A177C3E5BFF79DF99D93DE76425
+:10D0700013C0E2FFF8FDF1C1C99C993367E6BDBF5B
+:10D08000EFBC332184906FE8BF04CF0412F410FC8E
+:10D0900081BA433D9704EDD1FA23C3EB1C6A3A21D0
+:10D0A0005677A5E139F1F7115F22562D248390546C
+:10D0B000DE365DBED71E2E26644DCDAC24520CFD4F
+:10D0C000B450266D4F80469590D5566F968F3E4F43
+:10D0D000A85954435C84AC6A2124388A90F6163BE4
+:10D0E000962B726CDE601A2177BE2C7BE3E82B3620
+:10D0F000CDA7B969FFDE9C5B09A1CFD7B80919920A
+:10D10000479FBB9711924F88423F20D1BA5233E3D9
+:10D110002352425F98B3849049D1F9ACA9B1788386
+:10D12000A584C4253BBDF07D52ACBC13A66D6EFA40
+:10D13000DF37F4FD6FE0E782681947583BAE13BE56
+:10D14000A3EAEA04BE676C6F7E537A74AFAE7DAC1F
+:10D150009A98F63E2CF61C72CE37322DE579497539
+:10D160004E5A96A71092D5FF7B5FB69047F78E4434
+:10D170008012920E653D01782A7CCCD5C9B3ECC4EF
+:10D180001985B378BECACDE01B27D1CAE4FEE3B649
+:10D19000015CE3A2758510AD1BF0915D1AB3BF2849
+:10D1A0002906082923A4B32578F03D6BF4B9730A46
+:10D1B0007DDFD9BFFF4C55C679CF55552C9D4A9080
+:10D1C000B869BF442F7D5F0717A77666DFA73FA525
+:10D1D0006974BD2E4E37E477920278B5F37A8254A3
+:10D1E00037572D037CF9081941FB956BA4AE987D48
+:10D1F0004F13EF49502AE41D41DF79AC74D3760612
+:10D20000522869BBDDD8AE6620BC705C25FABEF63C
+:10D210008D34F0BCBFAB12F0F8CEC841DA6DDE7AC7
+:10D22000E0A77ECF558B80635F1A859BCCD71B030D
+:10D230008E6DC0DF028EB293C1B14DCADB19A6FC60
+:10D2400066D55C5E8A115291A676035FB6694EE49C
+:10D25000CBB6B4EE5025AD9F28B57861A8C49195A2
+:10D26000C88F6D43F71D5E08709DB9FFC36D08350B
+:10D270002D5425E04BDB133DD5A12A9DBC11F88A26
+:10D28000E7BF778C7D20BC9296A917CF236E4A2AE0
+:10D29000CE21362253BC384656D9EB9C51FCD8E0FF
+:10D2A00017FA3C3E6DC64732E5FB78AF0E8FF0EFC4
+:10D2B0001B564778D0C5DBB26FFDB904449119E91C
+:10D2C0007700E6A3A8BEE8FCC8D9C717C94E43BE7D
+:10D2D000278A3713E4657F7AF733BEE7FD06E60B4E
+:10D2E000D66FBA5C93791585CB9A17987C241E2645
+:10D2F000176C7686CF354463EDD98A97BE41D664E4
+:10D30000AE44F9D1AECE6F07F9F979A685C8123CC3
+:10D310005F6F07F9A198E447BACF62D00743E6C42C
+:10D320001BE4FE9A825928CF069A67569DF1FD614B
+:10D33000F5C6F77396A518EAE23D6BE6452F55A5AD
+:10D3400046EBAB943A3BC8915B33D74B753AFA1E28
+:10D350005254F73AD0ABA8DB3267E27B7139A53182
+:10D36000E7B5CFA3BD0572A25D65F326EED870BE0A
+:10D370008BEBA1BBB91E3AD53A37F2FEBFE6FDEF03
+:10D380006D716319C167C13506BCACCEA2F29A8E2D
+:10D3900007B0D77FFF29B5EE73985F14CF96287C2E
+:10D3A00080698B175B805FC5386D59F90EC0DBFA59
+:10D3B000EAC1E727F4AAE867557CC44BDFB312A3A0
+:10D3C0001CB7A5590CF89890C7E5C6B66B0CDFDD05
+:10D3D0009B3C63631EA5ABF587648274F73BE3FA5D
+:10D3E000FAD3AB711DEB33D9FA07A66FD3BAA944B0
+:10D3F00088D011D6534CF5A1A6FEF9A6F6D1A6F613
+:10D4000009A6FAB9A6FE95A6FA0F4DFD6799EA5747
+:10D4100098FACF37B52F36B52F37D5FF8FB17F2983
+:10D42000C3F3F5E2D920F205F4BAB9BFA268885F68
+:10D43000A1E7237CE536F2E30F722AB43C66671855
+:10D44000F02BE8F374F1B39ACAB810F093A23A50F3
+:10D4500099962F267A7A589F998FFAA38D4E0BF5BD
+:10D4600037B75F52041D5773FB70CE12031DF5E6EC
+:10D47000143AC07E24CE34944BA7A20B89A418DBA7
+:10D48000B5A1D1F67CF8FFD9A58B53D37180EBDD24
+:10D49000C1E72DE4C023C37DD7223E02D49E1E1BCC
+:10D4A00085931AB1A7E9C728DF6D49238138AAEF10
+:10D4B000B6F82D58FF3C937E08EC952AC687237852
+:10D4C0007F42C2128C23E6D3CEE9651DC8295ADEFD
+:10D4D00001728A96B7B56462B97AAD256B218C5713
+:10D4E00063433CA58EBBD5AF4059595E04FAFBB6E9
+:10D4F000B13B340BAD279E94497022B5174AAE2834
+:10D5000087E5244C9F9FB9173EF735FDCE24E04EAA
+:10D510008246C6E62A12B08E2364ED9EAC1F7AE8DE
+:10D52000B86A81E275405BB177859286FDFCE03692
+:10D53000A84ADFFE11B43EBCC082F685B5BCAF057B
+:10D54000EC7731EFB53FA4844B3BE6557B2D7E0A4B
+:10D550008215C3EB7E05701ADE492C1AADAB7E55E1
+:10D5600002B9F6469E8AF276EB1F28438E800FF5AD
+:10D5700065819EFD62AD6D25CC73603C11D952FE74
+:10D58000ED4B310EDA9943F1B906F4AC2A484274F6
+:10D59000951F76C13C9D32AB3F9777CCB7B2385AD6
+:10D5A0007F2CEF987B256DEF9C986B8175E4A5B976
+:10D5B000B4400CBA3A0CF218D6B776D170BD1E340E
+:10D5C000976A0D1D77082D8B7909B4760EC09F9749
+:10D5D0002A7F9EC9EA0738DCD466DE9EC6CAB3FD40
+:10D5E0001DF3F8AFE5B9855D3A94FB8FC5CE8C414C
+:10D5F000EDD3C37965FDED532AE886029D6FB27ABB
+:10D60000875AE8D89BD6DA889FF2D4A61C827EA2DD
+:10D610007F8D2DB01DF84351875EAAB3BB026B32DC
+:10D62000AED0E8FB0189CCD1CBC97B399CEFCA973E
+:10D63000707ED3E5637E99D2EF263F413B6B137139
+:10D640003BC01E89E0DBFFB90FE990E3BB2ABF6A4C
+:10D650001DD02959C8F4667E549EAD50E8389B61B0
+:10D660001C5ADFDC6EC1F96DDA45F9977EEAF39B4F
+:10D67000DFB180DD3C96042DB0BE312480A5872C1F
+:10D68000B30050BAB91EDFC6F9B790F237FA3B20A3
+:10D69000FA68FBA5C3EBBE06BE48222AD655BF1BBF
+:10D6A000E9A9715772652CFBC0966FE17E26A957D8
+:10D6B00026713F87C1D9965FD61FFE56B20CE17E18
+:10D6C00093C767CF07FF6EE7C1E030DAF4C4AB461B
+:10D6D000BA05A8CCD2C99D1CFE9D24AF4F93E93852
+:10D6E0007B72EB92E1FDC6FA4FF665C0D07E3FBE7D
+:10D6F0003F39DF8DFDAE08764F8761C679C395400F
+:10D700000B63AB7BF700C98CD136839B413CE53F73
+:10D71000DF93AAC23CEA86C23885A17005908FB318
+:10D72000FE603003E773BE05E86204CC87D3472D63
+:10D73000D2978A7422F00DF4504BEB573430F850E6
+:10D740008310DB89E236CC7FCB2A4A27CEFE749247
+:10D750009ACFEC236F148EC43AB87FE5CD8F41BFCA
+:10D76000022EB37ABC560817F87EE75E053ED0CC91
+:10D7700040DF5E077DDE9E5B770EACB374A3AF1512
+:10D78000E8CFB92BE4877E024ECE29214DC27EDA46
+:10D79000B9D06FD3CD9595A817BA08FA4B427F9AA6
+:10D7A000F16F9D62B4F708E9C2F58CEC32DAE994C6
+:10D7B0008E519FF7A3E39B23741CAF8F4B08FD137F
+:10D7C000E8B4C47BC0CFA0FE078E35801C7980EB07
+:10D7D0002541D7E27901891D67B8323FE2CF66CA99
+:10D7E00083C3FBCAFC18FEAC0BF86304F2CB7CC00D
+:10D7F000879BF461FBF09B8DFCD2B8F3937DC3E86B
+:10D80000FC9DA5EA04C08FF87E03C737A5E3C54891
+:10D81000C71BFBF6815E1B7E33A3E36BC1D6488F2B
+:10D82000D2E34D1E6D297C47D099793D4BF87ADAC9
+:10D83000737DD7C278576CEC7EDE81EFF9AE473E40
+:10D84000DB180A3A4814BEC3397CE36E89E0D90D6F
+:10D85000F263568DF779D0CF3E8F7B3A9433D5BEA5
+:10D8600036302DE6D6CB06BBCF8C5F4A5FAD485F26
+:10D87000C4374D92C09AEDB6A2FE1C806EA27AD338
+:10D880002FE8FEE653C8ED3B62E1E174C73F99EB38
+:10D89000BB1BDE4FA9F611E4D3D39DD769F61371F4
+:10D8A000B3A81D1BB0EBED5841F71DEDB3D04F16DB
+:10D8B0007810CF57B5CFAACE033A772ADE58FE4F5D
+:10D8C00044DF703ABF9FD3F97A6E7F7571FBEBF638
+:10D8D0001615E57B678B07CB8E162F8F879663B95E
+:10D8E000AA45C37EF29A4F2BD07FBF99605C6B65CF
+:10D8F0004289148BAEF2FC467B7F78B311EFA9D539
+:10D9000046FF3B596F2FD37F49E5F986F644EF6810
+:10D9100043FB69C48B0F00DDDBD22A0DFD48F813F1
+:10D92000837D2BE0385D9E87F1620A4FB4AB853D65
+:10D930002BDA09A9C378AED5E467769AECD80E80C5
+:10D9400023C297C1B10BE088F02DE7F0AC667E13DF
+:10D95000F77BE285DF53B47ECE7C8C8B1094572B03
+:10D96000726CA89F3BF298BDDD8F7E3275F293F208
+:10D97000FCEA354C9F0B7BFCF99C57AAC1AEDD92AB
+:10D98000694139B9256D8F672BD6E3BD4C9FFABB32
+:10D990003C147F560F8F57538ACDA2EB4DE47CB3D6
+:10D9A000DA4A30FEDD91EEF4421C2CD1B3A806FB1E
+:10D9B00099BE4BC8CF89DEFF23EFD51BEC0EA25CCE
+:10D9C00063586764FEA536368E44241827A5D866AA
+:10D9D000C09F9DE8EA79305F5B148F79B05E8E2737
+:10D9E000939D23E214663CB96B8CFA6675117BBF7C
+:10D9F00037E701C4BB19BEAE2A23FD7670BA684B67
+:10DA0000DF827C68EE6F1E9F4C8937F87F1D9EC1B8
+:10DA1000E324C29F16FDC08F76C7E86FF6A3CF86BA
+:10DA2000BFEEC6EF19F55D0C7F7DD2085D3C49C0A5
+:10DA30003B8207115FE47E98885B8BF114C2C6C3FA
+:10DA40003AC6B7FD28FF7E99E0423FB2C0690B801D
+:10DA50002C2CA0F3003A6EFB55426025ADAF4B98DD
+:10DA6000D99744EB05DB6415DB9DBEA11067EEDDA5
+:10DA7000306368987EF71EA9EEA211BA38DCB6E4CE
+:10DA80001B32993DA0BC13F600934BE8E7FAD74D43
+:10DA90000C69608F1711EF76025E306B17F444F457
+:10DAA00075B97FFDB3114CEF66CE25CBBA63E07F2D
+:10DAB0000D6F8FCA715F3CCA6B2EC70B38BCB6772F
+:10DAC000CD8AD7CB71DDF3A4587475B6E4771BC843
+:10DAD000EF51F09D1735D4DBA584CBEF47C8F75144
+:10DAE0007E2FCBAB5B3DA22CC67E9F1246F93D51EB
+:10DAF000D5DA01EFE9E0EF015E7E4AF112631DCF56
+:10DB00008E60F6CDF7152F42AF6EEF7A9CE1A558E7
+:10DB1000E0E57612CBFFFD1EE0E569807B3FBD4A64
+:10DB2000C2B80FFB45B6F60CB43FA56ABB007F1127
+:10DB3000FC5C169B6FFEF91DE3E77EEEB7AEE7F8DF
+:10DB4000E9E2F1F1DB397E3AB9BEEEE0F869E7FAD5
+:10DB5000FA56C04FDC99F3CDF066237E52ABE34D0D
+:10DB6000F830E227A9DC889F44AF113F099ED126F7
+:10DB70007C18F1935EA022FCE2328D78EAC737A7C9
+:10DB8000F057D2609C187672765DA802F6B886CE01
+:10DB9000E9EEB5C220BEAE0A28C57AEF35F9A5A2D6
+:10DBA0004C2F6078CD9C161BEF16DE1EC8D7A40242
+:10DBB0003D9DFC20361FDB79FF63AA1667E87F5185
+:10DBC000ECFE2EDEFFF5E15AA2BE3FFDB94B1EC4AE
+:10DBD0005F30AF3F41D2D20B701DEACE30C5FDB6EB
+:10DBE000156C1F729B43ED86FD7CFF0AA777BB8AED
+:10DBF00023F9ECE01FF171883F09C7CDE59F19EECD
+:10DC0000DCFF15ECFBE52DC81E7A356DCF5B9E79E8
+:10DC1000A48E96A30B46E03CF3EBBD7B00CEB26B2B
+:10DC2000CE50B67F3CCFFDFE184A6AC154E91B7046
+:10DC3000B8DDB1F7ED4529F42995836807D2890449
+:10DC4000B6533A8D5388929802EBD5705D56B06307
+:10DC500065586F17D6E34937964E1262FBD7DC1F23
+:10DC60003DAF200FC7731337FAAB29C48BA5E06310
+:10DC70007B1A51D227E0F86D7113082AFCF3C05FBC
+:10DC800075666FEE009F46A3509884AC82F090EECC
+:10DC9000DA87EB271EA2B278DBCD6ECC4FF8335D6E
+:10DCA000DF98D35FDFE9F6FBD2E12A21498434DB38
+:10DCB00059F98B78D71628BF74E4062068A58DA87B
+:10DCC000FB31E0D55F49D0FEF0BF951068C5C92E85
+:10DCD0003B87F907A73DCEBCB334CECFCED2388D2B
+:10DCE00005E9A71EE736F87532EC63FA9643FFB6EE
+:10DCF000E44968778AD20CD77D1EED06989F627F33
+:10DD000029F7BDD4A8DDE67C5342BBAD4D0A12888D
+:10DD100053FADF96D0BE22C50C4F4E9578F2C64519
+:10DD2000C7717A970D67F12E16EF59F1F75F8C02E4
+:10DD3000FBFB970933C349F4FDAD07A99D0779346F
+:10DD4000D3BCAFD7537A4A4FB579B750FA49E57E7D
+:10DD500072DCDA4907EAE9AF9F8C62FCBDA365BFBC
+:10DD6000BB8D0AA444C57BE104FA9E93EFDF12B990
+:10DD7000260C7663E22445853D8E2239580DF32525
+:10DD80004D16027C714F83713FB7B3B008E122EAB0
+:10DD9000C3F87E2E2955FA227936D48EDF58C0F387
+:10DDA0006A5CC40576A1F26F2D2956DE8328C5FC76
+:10DDB0004AD3A8DE4A82B820E5145A96760631F98D
+:10DDC000A3D21BB4831DBB2140FC360AA707E7FB87
+:10DDD000AE81F13ACB7D0960976F3834EBA2B17414
+:10DDE000DEA1B0E205100447A5E0BA439ABC368133
+:10DDF0003EDFF9A6C50DEBDBCADFEFF449C8FFF73C
+:10DE0000CC23013F85C7D6863D7619ECDE90858C04
+:10DE1000443B973A5C93B82854215ECBF8FE965168
+:10DE2000E9F8B027B43C19E0B22EE1FC9046C7AF48
+:10DE3000AD6671E71972F6F3306EA8D386F849E73C
+:10DE4000F94712A945FB39659ECE5EA6FF123B99A4
+:10DE50005F19BA8E60DE535299D3EBA7DF7B22CCD9
+:10DE6000F68DEEA96671671709E2F767C8BB1C1645
+:10DE7000FABCA75A71033D2599EC73278C4749AE2C
+:10DE800067231BCF359E8D9768CA83B28B79B9E91A
+:10DE9000BC28FEE44405F1ECAE36E64FB94CEF3950
+:10DEA0004DDF7B59E0399B14029E4FF86E98F812B3
+:10DEB000B67AD558F9139D2D2454A5CBB7700E1002
+:10DEC0003FFCB290F909B6ACBD7698D709DF2B6953
+:10DED00010EE7AE15FFBDEBB03CA7FFF574F135D95
+:10DEE000D75FBF3ABCED518063F36D2F221D72BF27
+:10DEF0006A084C81CEE7F95A1BC2B14C63F101525A
+:10DF0000DABBD75A8AEDB8AFB5768F03DB87959326
+:10DF10008083C27398A265FD0CF835247B57A83026
+:10DF200088E6CC9A44D85615ADAFBD92120E950F27
+:10DF3000E9F334D95F0CF190174822C5F7064D522A
+:10DF400059FE9BF43CF0534E95847E58CE219F039E
+:10DF5000E8E1C46C0BE6BFACA8BDF4C29174FCFB55
+:10DF60002A148C375457555C0EEDC30E317A715D0F
+:10DF7000C7F047E114ACA2FC30E2108B279492B0BA
+:10DF80003748DB877989350DF4C73C0A60985F27ED
+:10DF9000C70F8F0F949686FC00D444AF118F6E1379
+:10DFA0001ECD78758DA47804FD52448A985FC7EC25
+:10DFB000C75ADE6743D544F45FEF5189DF3AAE3F7D
+:10DFC000BE5EA4F6A346EDBF10B51FA1FC1BB51F96
+:10DFD000A1ECA1F62394895AC545A574BEA1743A53
+:10DFE0002EF05F4DD94AD81FB86FEAD537FD93960A
+:10DFF000657C9F8D726A4A25FDCE2CE062565FAF2C
+:10E00000519BE4A552D9505F9BA6887D3C3FE8D444
+:10E01000C42C0BDFE79971A746EB9D990ADFD76304
+:10E02000F511C5C450EFA9B118EAE7EDD18D3F0550
+:10E03000F01387F5092377AEF71744DBEF28A475B3
+:10E04000DA7E80DB73B54B2DBE2D31E877D948469B
+:10E05000BFCABF895FA2F8FAAC80A09F2E5B349440
+:10E06000DFA4505141BEF6D7CB540EEAFDEB022A95
+:10E070005775F191C3853CAEEEAB60713612FDF978
+:10E080007A12CFB322F0BC330476C4ADAF5EE90D93
+:10E090009281E5AE355339A2A7938B051D8C2423BD
+:10E0A000D19F27530E54009D754D54801E4A391F31
+:10E0B000106EC761889FD2CF539FDEFD174D053F7D
+:10E0C000ADDDDD3612F37E2E1FA9CB935995BE68C8
+:10E0D00022E83391F7434895FB7DBA2EC97FA90505
+:10E0E000ECB681ED1485BCAF83476FED8C24D00373
+:10E0F0004E2EC7CDFD57B5EC7C05BEBFBAA51B4B58
+:10E10000679A0F858C5DF163FC669FA7AE11E6658B
+:10E11000CFA6ED3A396C4BA3EF19FC806C667709FA
+:10E120003CB809C683C4BEC986CE09F17114189DD6
+:10E13000545F807CDE109A8579159DDE0983C6AF19
+:10E140004EC5275BAB5E2269148E4FBE3AF32FB3E8
+:10E15000697910F88DEAC12738DFE4943FF6DAB523
+:10E16000067E396AE297A3267E397A0A7EB9E04EA6
+:10E1700068EFC9540CF51CE0175D7D6B845F583D5A
+:10E18000CA2F47915FEE79D986F58D238F1AF865EE
+:10E190004521AD67EBF865BAECDB12C30E78E53BC1
+:10E1A000E2975F9F29BFBC7166FCF2C4D9E3973F39
+:10E1B0008E4CFFEEF8C5779AFCE2EBCF2F87605EBE
+:10E1C00067CA2F9DEE20E60376CEB6540762E0FBC9
+:10E1D0007A8E6F11F72EE3718A69F3B4CBC7823D53
+:10E1E000CBF3D6443E4DE73CA6BF57D4CE407DB9D5
+:10E1F000F520D397423F97713CFE8DC731CA424C00
+:10E200006FA6974BF8FE4C4D0AA8F4D74E6A12A49D
+:10E2100082BE9E22912E1596BAAC76A414B59BE8C8
+:10E22000F7D06EBACFCBF266C92166EFD8E97F404E
+:10E230004F17975B0D7A7588D9FE32D5C53EA6D8A3
+:10E24000BFBC0FF212283CBE1EC9ED2693BE15704E
+:10E25000D870A812ED90CFB36D83EE5775F2F546E6
+:10E26000ECA9525F45AC78587DA184F0BEC9A3C526
+:10E270001796813EBE0AF5AED0E766BDDC53F59237
+:10E2800051CEF8C7A75616EBE48C7F3CEACD889CAC
+:10E29000E1F501E50C3907E546442FF37A442FF305
+:10E2A0007A442FF37A44CEC0F8D951BD3CF281F1C3
+:10E2B00077FA757A7B19D4B34FAD9717707970B62A
+:10E2C000E5CC1FB8BDFA5DE9E5CA424E2FFFB99C07
+:10E2D000A929FC0EE54C2DC899A453CB995A90332B
+:10E2E000C506397355E1B7D0CB890DBD7ED8BFBF08
+:10E2F0006200BA77707C371568D7C0F8A4E6F4F2EC
+:10E30000B6CD74D55BFBC0AA0CA0172FF3F3067A29
+:10E310003FB1F9F7AFB4E9F2A21395103B5FD1FC1E
+:10E32000243E9FDB7010E365A79A6F7D21C1D2ACBC
+:10E33000477B6BF7D9916EBD16DC13FFB6F3E89CF3
+:10E34000CDF8F28DED4FAF073EBA8FC7FDCC76AE5C
+:10E35000C0EBE9DA3FE6EF5E3F52C571CDDF3F1516
+:10E36000DD523ADD0C747A22FBBA31E0E7C98977D5
+:10E370002500BCBE07FAF0C96F43A7AF8C64F83C18
+:10E380008D750761FCEF6ADDFF017FBEFC6DD6BDB8
+:10E39000A090D1D569ACFBBFBF4B7CFF07FEC26725
+:10E3A000DF66DDCB04BE093B2FE3865F289FACFF11
+:10E3B00057E1DB10BF58FFEFD18FC13ABBBEB26F40
+:10E3C00086F805F9FA1BD9AD3F3F45D8B99944FE07
+:10E3D0005EA28F9D877157EBCE4791E879295C0F3C
+:10E3E000C63722ED07629D97FBAE4BB047DEB10EFC
+:10E3F000D26E63713BF3F3FF2E90D83936A9D60164
+:10E4000079F1BDB3F760BE41E7EC09B86F65B6536B
+:10E41000C47B3D2D1AC6933A5B7C58DEDE521D82CA
+:10E42000B8C9932FBD25413E58E94B0DA8DFD64E04
+:10E43000FAE130CCE39B5A1A0FF5DB4D768A8BDB81
+:10E4400029DE51AFDFA9F75F9EFC4D13CA4111874A
+:10E45000BA2362BFD0F7549D9F44EB400E113F0991
+:10E46000EA063F69D97AB05F7AC07EA1FDA78E5ACD
+:10E47000B63ED677D65A483DD82F6B1B2CD5B1EC7B
+:10E480009770416CFB85D671DFCD91680FACCC03E2
+:10E490007B86D4E9E36AA7B25F1E1EF5DDFA495711
+:10E4A0008C3A3B7E52846FB9DD32A4485B0821D997
+:10E4B000B32527869DA69C18D65F4EDC38EA5BF80C
+:10E4C00049E102965F2DE86BABEAC578726735C10A
+:10E4D000F8636768656A09AD3FD1602112AD5FFFDF
+:10E4E000328B0B6F2827013847BB219B603DE465C9
+:10E4F00074304376FE08E2E03D55D47F52216EF73A
+:10E50000E35A80EDBA8499B73928BDD4962B04FC20
+:10E51000A619F214FC4E4863F9A1B54EF2A338F0E7
+:10E52000ABA62A64E519C4AD13E562897224E54FF0
+:10E530003519F876A078B439FE4CE417BC802F73F7
+:10E540001CFA4CE3CFDB055D7DFBF833F2DF970F60
+:10E5500034CD8278EEA9E871C12815F599594F9903
+:10E56000F958D0D340F4E7043B69A2AECECFE186A0
+:10E57000F93EB513ECA48951BAE8AD9D94142BFF74
+:10E580004A9409CD7F78457F1E2F41E9C6F1129A42
+:10E5900077E1F3BB206F00D6A778519E3E5849E53E
+:10E5A000708CF9ED6E597608E4E7AE96662C2F5024
+:10E5B000FAE414DAFFE916FF2180DBCE96762C9F71
+:10E5C0006CE9C2F69E968D58DED112C0726DCB0EEC
+:10E5D0002C6F6BE9C6F2C17CF69D294A10C7B9E0E1
+:10E5E000241D5F474753FBE87774F83EEF43BFA114
+:10E5F0007D72B8DDD07ECEE12E43BD2CB4D1D0DF0C
+:10E600003D2560686F2AA83B067CE92ADD6178EE2B
+:10E610002CEE36BC77BA7EC1D9EE976B7F04B6C9B3
+:10E6200049329CBBA0AFC8706E88F2F190662A5E3A
+:10E6300069FDFE441EE7E866FBE49924F283740951
+:10E64000A964601FF426B23CC8D62CF67EEB8DACD4
+:10E650007E7F0EDB3F12799AB23D42D744CA88EEE4
+:10E66000E7DF9FC8CF2915B0BCC8DCE200442448CE
+:10E670002E24A8C17E4829DB2713FBDEAD3CEE70BB
+:10E68000BF95EC94A83DD9AAB0F9B76A24B082F638
+:10E690006B2D66F57BAA48C002F3D7A814CFD0ED46
+:10E6A0007337EFFB4A2A89EE9793D11AEED7C87CCD
+:10E6B0009F3DB2EFED7897E0BE3E87D7CA848F3199
+:10E6C0008F36B9B94F02FE1AD2DCD70BF3BBFF1657
+:10E6D0009B1ACB1FEABDE58B2CE09B4D377E910545
+:10E6E000CCBE29923FD3E7D0E7CFE472B86C6ACEB4
+:10E6F000C7FC854DF52E2F87B3C5D48EF90C9FD757
+:10E70000F3FB0988827ED1307714AE01913F22431A
+:10E71000DE1D5DFF88E8F9D3FF34BF6653F37296C0
+:10E720005F934D787ECD4CF427051E364139AEFF00
+:10E73000B9DEEF3ABFE6947935A63C0703FD42DD2A
+:10E740006FA66F15F112C7E95BBA99E5456499E8C0
+:10E7500046E45D08BA14F919225F43E46FD8785E85
+:10E7600007FD2CCF6B8E4D5FB63DC403E7DE644BD7
+:10E77000BC774BDEA9F3089A3DF95C392C1BC7C660
+:10E7800065F903FF334AFB85A72C3A6E9E47BB51C0
+:10E790005F17E556F875321DC21BAE027BB5A85C4B
+:10E7A0006B85F37C29A504CFE994964B58161D621E
+:10E7B000F5DB3C327EAFCDC3E24DA27EB1A63D0774
+:10E7C000EF2799DEBB38F29E15FBFDDE63E1A5C2A3
+:10E7D000E6CDF3906772FA5E3D5966F9D155129312
+:10E7E0001BB0A13A89EB430ABF8B89FB92025DDC27
+:10E7F000F5C71C5BB7B7B0FC3E910FFDB79765CC72
+:10E80000877696FBA6C1D9B3B2502808FBEBA5DBEF
+:10E81000883B4585F98535E0C7153977EF817C88D8
+:10E82000272E647BB6171F62F6C28FCBAFC6FB469E
+:10E830005C5FCB188F754F49F406E0433556A6FF51
+:10E84000453E74B9D15EA835D90B179FE2FE8F14EF
+:10E85000D2E7073DF988C7148FE5F7800C24BFA3E2
+:10E86000F78030F950CAC77496BB1D10BF2E3A64AA
+:10E87000C1E39EF2364DC6F3B19D2CCFE389906F74
+:10E88000D0F3A82F723886B89CF81BCF93ECE172B6
+:10E89000E2752E270E839CA0E52B3C4FF210CF9300
+:10E8A000349F97D8D152FD92DEDE319745927F1684
+:10E8B000E6416D56089EBF1BE0BE8FA2001DC790AB
+:10E8C000C7B802E9676FF2DD15401CEB350BDA952E
+:10E8D0005D5348562CFFAEEBC2CA41F30F3B5BE6DB
+:10E8E000BCD43688DFE8B4517F26D6FB1E71AEABB0
+:10E8F0000BCF5BA4955B08E45565D9FBD8FE43AF0D
+:10E9000003E97988D78EFBFB649E93BCABCB53B9EC
+:10E91000DDD7350BE6FFE03605CFE7887113BD7410
+:10E920003E3A3A499BB22713E6DF39359809F64C4F
+:10E93000D7F87D1B0B205FE4A04C800CCCF3B21603
+:10E94000717F96AF2B4DD1A45879EA03ADEB038FBD
+:10E9500064B867C20CFF01ED0EC80818FCBC95B383
+:10E960002846FEE269CC13EDDB6F765C3B1BCF4D96
+:10E970009EE6FD17099C0EB3161207FADD408F8341
+:10E98000E0D9650D21DED62EB454C73A5F5B54C47E
+:10E99000F0BDB6F453B48B4971EC7924959BE9959D
+:10E9A000CDE70E858E4FDFEB2A8D3DFEE51C6F9483
+:10E9B000AE5F0379D5556D41BB22092E62C0FC1CA8
+:10E9C0006A074948EF28973E2BB5313BC1242FFAFF
+:10E9D0007DBF54474FF9FDE5D0F9454E437CFF44D8
+:10E9E000F6ECA4600C3C8B52C051C8A1FE70247898
+:10E9F000FEB58BC39114C7E6EB28BE56887855DD6B
+:10EA000029CEEBCD2E2A8B714E6C003C98E9E18E1D
+:10EA1000853E5C1779EE35A282BE2CA5FCA88B43FF
+:10EA20000C043F33BC167EC7F032B7FFA888C74737
+:10EA30004E739DA7DD8FDA456E9D5D0C87A2155A3A
+:10EA40009FCAEB3FF64BE17BA85C9576FD09ED9EF6
+:10EA5000A9BCFC3194543FEE9282EFBE415F9E22EE
+:10EA6000A93980B4594F8F820819B9555A66B07FB9
+:10EA70003A24EFE167302ED4970AFDA6933A852118
+:10EA80003980EBFA93146E05857529D15641D94822
+:10EA9000BA6CF05E63CF9F0EC3771A7B1C4119825C
+:10EAA000933BADC7F471A36BF4E747F2E0168D6EAC
+:10EAB0005B1E9DCF921DC67DD20612C2F196761BBB
+:10EAC0009F9BCF8F4832050C5C4E10C97F9D82F909
+:10EAD000BDC4C1DAE3478BF3E87D85FAFBCCEA39A4
+:10EAE000BCEAEDCE20DC2F4402C6798A7B739EA758
+:10EAF00072CC3E01CFC33C0C74FC91DBEEB7507B73
+:10EB00003923A5AE11E07115516DAC647683589729
+:10EB1000B887668173B60DE0BBA0DDBC0ECD06F3F1
+:10EB2000F959D7E0EB1378FF4711C175DC5EA46299
+:10EB3000B934BE66BF06CDA5A15CFD7D104D5C3F1E
+:10EB40009065A906FE7D51D023D1E4D3597F7FB8CB
+:10EB500016609C4CC075603A35C6C976C121D77421
+:10EB600084DFCB7AF811A5AE04C615EBF96759E836
+:10EB70008120ECAB26B27BA0DE4DA97B03FAE71C1B
+:10EB80000EBF2FD1A913A75A08EBFC78E747AFC8EF
+:10EB9000F9D1F51112BE1BF2A3EB77CAEE0E58CFD6
+:10EBA000CEE70E03BD0FB42E911F4BE901E146E7FE
+:10EBB000F521E837F3BC8EDE407E0A76C974B9D8F9
+:10EBC00010477986C3F19E62DFC7F05EE94BD92E0C
+:10EBD000BC7F27BF7BDF503A8FBEEB25CCAB4D937C
+:10EBE0004915C04FE4237CEA54D0CF4E4BF0CB2ED6
+:10EBF0005AEFBB8A78B7C034BCCBBC402A724EB146
+:10EC0000B783D24DC6F5B20FE4C9DFAF5B90BC80CD
+:10EC10009619890B9347D0F28238E277D0F13224EB
+:10EC20008BAF1B8350F3932FA1F3FC491C9D27ADA1
+:10EC3000E7DD90101C41F9ED8F3662077A4D4BA845
+:10EC40005B371DBE932CE37C8E503B51A172ACE22E
+:10EC5000F2CF26DAE9F7867EED9C00F3C96A9E467C
+:10EC6000DEA5A03C5CC4F8E4E8C35F4E8473E0F228
+:10EC7000374E2F9E33E7F4973682C1C38CEFDD1CED
+:10EC80001E6FC6337FA731DD762BC4DB3FE6FE0F58
+:10EC9000D13CE82F5CC7FD8537E3991FF466A18856
+:10ECA0002F05D3F5F66DA3434BBA0C9C076A274199
+:10ECB000BEF3676E2D2919FA111FF2ED75DC6FFE98
+:10ECC00098906AA0F3EBD64C1B9242DF4F6F6570B1
+:10ECD00030CF6FEC68A69F1B4E5282D6C5CF1A94D8
+:10ECE000A00DE477C3499BE1F9DFA91DEDD79D573E
+:10ECF000FFC98787A6C3FCAE24E155D0FFCAEB123B
+:10ED000058E09EF36B0F9FC74070694C568842E1F4
+:10ED1000D12811DF60FD9EF9B71C13BEB34733FB4A
+:10ED2000257D5AECF55DC4D7376D75CD2F81CE1A90
+:10ED30004356B4E5AFFB43C590C1ECE7C693E791FA
+:10ED4000802EFED7A884111E8D27CFC7E7D3561F6C
+:10ED5000B301DDC3382A7D7E9D431B02F1DA81E0D9
+:10ED6000BC9BDB418D2793893F55FF9CF17774FC59
+:10ED7000346CFF2D87DB6FF75BAA63E577358F6611
+:10ED800070199DAEF8201F684C90689B637C57F407
+:10ED9000CB4831EE5F98E7D55319BE12E67D4E158C
+:10EDA000D1627D6F3187A3986F4F4A78910FE9B395
+:10EDB000AF10EE9988D4DD7DB9FA7B24B672FCF5EC
+:10EDC000FC309C0BE37F7C61EC733B02CF9394653A
+:10EDD000682FBF9052F734C8B77997D10AA58F2111
+:10EDE000F38216763EC53F28BEA370964960E26066
+:10EDF00070B661BB18EFA317393F523F1CF2D4AF76
+:10EE0000E2F2FFAA6D4B30EF49C8A98F36CA28A796
+:10EE10003E42DD42CB8084F6EBFC3A0A6B2A571661
+:10EE20006D9FB60FD4C15599D4064D61CF6F86B290
+:10EE3000CD6A88F78BEF2D38CCECB7859D463D57D2
+:10EE40004F3A3F01FBE0A317993CA0FC6D0379BC4E
+:10EE5000E82EE338F5DB2EFA00E6576FF2CB33B835
+:10EE60007E36DB799B47F3F8FE2432E94CFCF24610
+:10EE7000A2ED188D7AC127C33CCA14E33D5BA24CB6
+:10EE80002F61F05FBEFD84CDA50E3CEE112A470A2E
+:10EE9000E8B8C7A83F0EE51F476BBF1F4DF170FCD8
+:10EEA0002083CB81D1754FC1F78E1F64EBFFB4E196
+:10EEB000D345704F0C99C3EC8638387C407F8D9BCE
+:10EEC0006B0FB4D2F5AEA662CA01E782E2983D228A
+:10EED000EC3059BE5676D1F6C9FF58980CEB4C7BF6
+:10EEE000E807D5305EFA43091AC0ADA3421B0FF202
+:10EEF000BEA3D6E985F32A9B291996D3F7ED741C96
+:10EF0000D02781DF4EDE03DB9105DDEB2AE1DE1742
+:10EF1000F7AEDEE030BAAE760BBB27A3FD7CE26D28
+:10EF200025D1EF35EDAA7D0CE6953B9BEA0709CE8E
+:10EF3000D16BE3DDBAF109B7AF1A394E8E3F3BEA28
+:10EF40008EF3E05CC27E19CDC74F1BF2D1AF1F4DCF
+:10EF5000183D89FC7BF836D891027EC7A8BE22BA3C
+:10EF60003CB5D1DD52D04AD7B5B4E731BC8FA361EF
+:10EF70006530632EE8DB0715A647F9FCD2FE9855ED
+:10EF8000A9BAA2FA77AEE4463B52D8C99713F15317
+:10EF90008CF1C2399C0F2EE7F6F1DC0406E7F9C4C8
+:10EFA0009B0BEF5D61272E0B85D9DC69DD65CB40BE
+:10EFB000EF2EB126837D036B898577519AED20C1B1
+:10EFC000878D0F24FA21EEFAB1D45708831CB13291
+:10EFD0003EEB7B362EB025AFFF38D631CCAF6F2C51
+:10EFE000E4765D01D1E0FC40E3EE51781E2C2E9ECC
+:10EFF000E27102CA3F3BE0F579D0FF74DDD73CE314
+:10F0000008E2B930715F999BF813E9779A760FD9C6
+:10F01000027646DA086DFC723ADEC7D6702ECA0B4D
+:10F020002ADF24AA5B73C7ACB944A17CD53894DA33
+:10F030005DB47ED14377B37A7E789185D6AF7DE893
+:10F04000D14B144A9F8DA3C3EF43FD96879E66F56F
+:10F0500009E14532AD6F7C683FEB0F7BD894B0B6C9
+:10F060003F74E012F0FF8F2433FB8178C35702FD19
+:10F07000343E3DCAD2A15BEFBA314C3E1E71B07E28
+:10F0800047F2C84F6701BC3DE1C259BA7DB9EBC731
+:10F09000083B96D971629DE23D92197BFCB1639861
+:10F0A0001EBD661AEB7741026977B0F3757EB0C773
+:10F0B000F6EE1A8570491993C2E145C7298D8E2352
+:10F0C000E028C613DF5D0C7A1DE4BE95CA7D9D9CC9
+:10F0D0003997E38D7EA70DBF53AC8D877BAC1A6744
+:10F0E000658F07BC517C291C5F8A1D2F57DBCCE63E
+:10F0F00047C74D2E413D3311E2CA7BBFA6FDF3A2A7
+:10F10000F336D3C78C314C1E5DD3CACEF7F7258FAB
+:10F11000403ABA2081D98BA494C28FCAB38D1C6E99
+:10F12000EBC624333F32828721128EDFCAE197CDAE
+:10F13000FA9FE97AE7F0799CEDF5EAF0A4417C6565
+:10F14000EFCE22C4D3C6081DAC338C736485E9BDF1
+:10F1500072CA78308F9411F8DE6A07B1E373B22572
+:10F16000F25E1E7DEF82697D13811F96727B98F897
+:10F17000CFC7BC86062E2D96B6876C10975EDACD6B
+:10F18000E2E4A480AE0FE863564D295F9F9BAFCFAA
+:10F19000CDD61730D02739D4973B3BB13FDD46E081
+:10F1A0001E19AF78021FCFC0CFB1C603BE18081F0B
+:10F1B0001D671B1F629E267846E06C9A9F8027F091
+:10F1C00031BE576CE42731CF5BC644E2B1467ECEF8
+:10F1D000FB96DFAB60EF2DBD91E211EC1FD548CF60
+:10F1E0004B7BF22CF38BA3EFB577AFF0819C4F9064
+:10F1F000541607EFA9F583FE6BDA558171AAA54F66
+:10F200003DFCA49FBEBFF8D10D2E48AEFA48E9CA16
+:10F21000003BB861FB2A17DC33F7A1E27781FCFCE5
+:10F220002820C7CC5B7F9BCB01617735727D73E46F
+:10F23000B7B7CD04787CB1DD8AE70C9B76C405E3D3
+:10F24000306E720DDA63B4FE36ABAFFE04FCD8A6A6
+:10F250009D46FB69F16F3664A8484FFE6116DC04D9
+:10F260000B0E83CDB0C66D56DC4F693C247BE9673D
+:10F270004813E9BB15E6677E1FE67192E2BDA95B04
+:10F28000BE0AF2FBCCED5492A03DD6D4731BDA69D2
+:10F290004D3D177E00764593299FA27E003BECC52D
+:10F2A00031DC0EE3F7A40BF890403ADA37AD0FFEED
+:10F2B000B2E46D3AAF63DBFEE2928AF57A7325E23F
+:10F2C000E9D3EE059B9E5607D6AF1F837D10A77F1F
+:10F2D0008FE157DD29B18DA15DAC6CB0065D101FCB
+:10F2E00068D86CF5520D4C1A1EDEFAC0AFC1BF7C57
+:10F2F0002DCE0BA9A64B1E7EFE9573697DC963D6E4
+:10F30000B41A367D27EC730B3C41CE06D829022F68
+:10F310008B7FFFBC0DE290F01CEC5E819F258FF58A
+:10F32000DAE09C9F198ED3BA7B6D980F6BC653F7AA
+:10F33000DB33C004697DF04B1BD0F747BB25BCF71E
+:10F34000DEFC7EFDE6E75D40870027F04305BE2238
+:10F35000F8EB87B7E0CCA74BB11FC6434E85BFC7BC
+:10F3600001476548E78F3C0D7194D7E3BC0087FAED
+:10F3700047AE75C17A3E5096317ABF6F5506DC971D
+:10F38000576FF567B8B164CFEBEFBF1EE9F0EA83C2
+:10F39000D767B07B24B42C768FA63F0BD6F9B37B0E
+:10F3A0002FC1752E22754887F5F7B1F8C6E70AA96F
+:10F3B0007E2C06BFCC2D66FCF2C19638480E221F6B
+:10F3C000C03E02EC9BBC28E3B9FB7EF72291E558D6
+:10F3D000FF9CC717C61547EEEDB3837DD7C47B35B9
+:10F3E0006D5B1D023C1DC9D186403C9FC2C1CFE16F
+:10F3F00026C1BDEFF2C1E943189E880AFB21F81E21
+:10F40000B5C7A7C173E81FB26A8E12C37BFC7E1B0F
+:10F41000F67D11DFA0F38E87FDF40F32585E9E79E2
+:10F420007D1DC5421E9010D1D3D940FCBF6D0DD2B9
+:10F43000D7678718FF34066AABB13D640D0E81F6BD
+:10F4400040EF6C09E5439C61FF3C421FDBAC9CBF75
+:10F450008DED749E8AA487EF6E09EFD314F4B2E8A1
+:10F46000AE38C37E7D947E8CF745097E157ED6D559
+:10F470005C1E98D76D960F97169BFE8EC2BDE9A7AE
+:10F4800015FF6EB0061EF835F033E55FBF0AFC6C61
+:10F49000C5F8C0D1DF3DF7CA1594EE8F760B3E3626
+:10F4A000CA5B331FD73F5E4662F1F151A797C4E4B0
+:10F4B00063FA3C261F3BD9B9E9FF57F2F6EA01E4AB
+:10F4C000ADBFD8286F3F27C549E711D0334BF0BEF9
+:10F4D00057337C85DF6B96A399C56A4C394A7F0EFA
+:10F4E000111D3C051C057D2E7E68297E2742C782A2
+:10F4F0004E051D47E8D4BC6E233CCDED5530775DFD
+:10F50000FE837525F563C0CE7D560E6CA1533B4E30
+:10F51000E7722B85FFF1DFE561BED12AEE071C778C
+:10F52000F7B9207F6C15F73BFA202E99147DDEE7A2
+:10F5300060F6D2715F9F2B596737BDBD4B76819DB9
+:10F54000170E90EA58F1242AB1711E6132503BDB4C
+:10F55000173BCEE3A1C779BC73BAECCC6D8638708B
+:10F5600017BBD77FE18ACB5CB02F707CD7883B80FC
+:10F57000FF7EF66799DDEBE9D714C89358C0404089
+:10F580003E24FEBBA7D0752ED8B504F31BCC7194D6
+:10F5900045CE6DB8BFF039B9194B73FC6431C4590D
+:10F5A00080DEEF353DDF7511D2D762137DD5017D49
+:10F5B00065F5A7AF1704BF8E27E3F5E7CF9673B9BC
+:10F5C000375D2EBE03EC99E3D4CFC75C02B9F800D7
+:10F5D000E8DDCFC1EF07C6F0A723DD2EA9FBD0C61B
+:10F5E000EF71467A177468F6F7CDE5B127FE3EE96C
+:10F5F00026DAA5E1C9374AEEA1E5B1275F2B7C06E3
+:10F60000EA4FBD9AFB06E9DF7FDAEEAFD0BF39BE25
+:10F610003B0EE7737CF79F726F82FAD37198877500
+:10F620007C651CE645F9772706E03CDFF11C16B740
+:10F630006B7DF6CB12CCBF206D88C793C536668F25
+:10F64000ECFA9FB7207FFAD35D712AC4299A7627F6
+:10F65000A0DFDEF4B403F35E8E3FFBE5247D9CE97E
+:10F660003F5D4FA38DC5338F2792398F033D2733DD
+:10F67000FFAEE999C95B215F6E694FAF0DF607A632
+:10F68000FDF15F2520978E3FCEEC0FEACFDF0F37DD
+:10F690001DCA639BEEB652787F0C3622F5C3378DB8
+:10F6A000EDBE14FCF0FE706170384EE100EBA2700C
+:10F6B000A907793A103C868EB521FD7FFFE0F1095C
+:10F6C000FA170DBBCE413E8AC245D2D8F3C4805D45
+:10F6D000C2F5B3E7BBBF2C017BEA68F70AB40B4E57
+:10F6E000B5EEC963BFAF74F06DD72D054F67DD73FD
+:10F6F000BEB7F866F4FF16D757663EE84FE74FDD12
+:10F7000080F54712BD38DFD3E4FFE6FFDFF0FEB837
+:10F7100084FBF2A7C2FB2FFFD7E2FDCF1CEF896E5F
+:10F72000C82F3BFEECBF72896EFDA75AF793FF4BC3
+:10F73000D71DB18F649F1DAEB8EF24C1109C5F5FD1
+:10F7400035809DF2EE5849E4EFA01F22F277E4B431
+:10F75000C56867C8691D6837AC22EC1E64BF6AE1E2
+:10F76000F7B1B1BCEFF66C6F00E3A28AAF7E33ADA8
+:10F770005B8737783B7004A37F2667D454439CA5EE
+:10F7800075059D171DA735DDE26E55E19A764B3064
+:10F79000AE04CBB7A15C9DF1C3FDF05DC569BCAF04
+:10F7A000D669F237E20B6CC6BC62B2C70DFBD50E50
+:10F7B000AF0277B95353D678BF6DEF58B6AF1D4F30
+:10F7C0000298B779A6704A2D191C4E66F808B8F54C
+:10F7D0008313F747C57DFC4A5A4708F85021D49F48
+:10F7E00064EB413F14FE8E14ECD7589316793BD846
+:10F7F0007E8A1AB9C71FF220B8BF19B96756B5A0DB
+:10F800005F2AE0AC1B0FD76F86F399C257E0C54162
+:10F8100066219E1DD94E6F80CE7F95CAE0BE8AC2FA
+:10F820001DEE1717F0157033E3E17DA0519D1D1FEC
+:10F830002D8DF93AFE4AE2817D96E9F294B01FECF3
+:10F84000E5F204B4978F49242851FFED5845462529
+:10F85000F815C7726C0A9453FBE89A74F3BDE0A4E0
+:10F860003DF237F4A05E41920DF5633985F8FE3420
+:10F870007B96E1BD0390B74DFDF66359E576DC0F4D
+:10F8800075E719DE9B99E0DA02ED07208F1BBF3F79
+:10F8900003FD9B1F641619C699F9CEB17BAFA2E593
+:10F8A0004EEE57F74DB5623CFED89FE755021C2F30
+:10F8B00054C71BFA1F24EE74202ABABE2A58DF450B
+:10F8C0009EC986EF36BCBDA710E2103FF256189EC7
+:10F8D0005F5C7EA1611C9F3D1C04F2AED56A0DCF1A
+:10F8E0001B9ABF204A2A21E7357F4D9489D47C0F8B
+:10F8F000761BC699B87FA7A1BF37E49E0626E3848E
+:10F90000C3DEE7A014F9ECB654BBDF42CBB16F57AE
+:10F91000CAB0EF59F65E5D2B84A1CF3B463C400751
+:10F92000E79078DC0F1C28EFFD4B4BA00ED6F90BAF
+:10F9300039E081327ED8A21258D747999D326C4B5C
+:10F94000DF23D55D5E0276D6678156A85FF075B776
+:10F950000CFE64EB0E19CFD74D976B12FE0AF2B86E
+:10F960005BC21CFF06A705E3F04753BA4BAED5D1E7
+:10F970009DC8DB31F371D1C48A25307E5BA6D6D514
+:10F980000BF2B4F2EF57CA31CEBB12B7F15EBAA296
+:10F9900089BEDB619F5EE425C54F935972FB0FACB6
+:10F9A000182FB9D5E27570A1807AD73DC3BA19F87E
+:10F9B000DD3A8EC98DF8BF1015E241F1A975329C70
+:10F9C000B323774898D722BEB7A09CE5DBDF5E2241
+:10F9D000EE3771A7FF642CBC9FC8F205209606EF96
+:10F9E000D558D04E711DF6EE83FBC8EEF41C728321
+:10F9F00078E8A979C70FFB223D874353258A9721D1
+:10FA00009D15270A587F02F1CD1E4F55C258D46F5D
+:10FA1000E59887B39CE7CFF44EFD8D07F4C7F2A2BB
+:10FA2000D14306CB2F779D9488AACB33B08E5371E8
+:10FA30005E2E258CE7C55C27156C27E1F1CC1FE411
+:10FA4000E3BBE6A9AF5E0BF3D86FC57C67A2684B3A
+:10FA5000601D1DA3DF543B701D84FF5D9130FEDDF2
+:10FA60003CC84FC20BD19470E64F629CC33BB2A31B
+:10FA70002C19FCF2D40A2F9E1B4C7D588E9C9B05A2
+:10FA800038DC0EFFC373B597BE5A45C7DD01B2928D
+:10FA9000B50709A5EF0E9B68A7A2C6C3EF3DC4F644
+:10FAA0004B2F831843BC6CEC3F2E3FD25FB36746AD
+:10FAB000C7FF43C9A5AFB6C584671CEAEB8E1956CC
+:10FAC000CC9F38355C134E01571783EBD7542B640A
+:10FAD00044E38BEF496A2ED0DB9D705C80FAD1BF86
+:10FAE0004CAE0B96A4C3FC8363E1F97C9736642A81
+:10FAF000A5BF1E9B967B23C6491C98FF55FBF3A30D
+:10FB00001BE1C8986BE6114F1BD08DA2254C8038A5
+:10FB100095FB0B940B22CF2D0A474ACFF49BB75B82
+:10FB2000A2759013AE285C35B82BB84307673BAD80
+:10FB3000D772B8FECF23F597B5017E17DA912EAEB6
+:10FB4000E53CD5964CBA20CFEE84FB814B811E4E0E
+:10FB5000ECB062326B0F34821EF5D8D9DFF5490B59
+:10FB600067C2DF71197BD082F1BD37297D68401FE4
+:10FB7000C1F1087731DE8929AFA6C0F98913694A36
+:10FB80000AC06771D88670FB894282707F6A4FDA3B
+:10FB9000C26915C81F2AB677F371264FD4FE518269
+:10FBA0007A9D9FFFD5CE95E1BED481F065DECF87EB
+:10FBB000F8F0B92903D3415B851DEF1F6A2A5F5115
+:10FBC0000C7A62797221E663355549A8879B9A3F82
+:10FBD00043B88BF1959332517579533D104D4CD705
+:10FBE000DD237FD286ED0DCD27509ED3E9E401DFE2
+:10FBF0001CE3FB9D5D56F2D35A5A36FC5BFE69ADA1
+:10FC000013F72DDB419F34903DB6E53A7948BA3F72
+:10FC100089C8FF71147777D6BC180F72B656725F19
+:10FC200002970ECCEADE7B19ECE7D73ADC97C0FEF0
+:10FC30007F8EF71156CF715F02FBFD631F4D9A0354
+:10FC4000FBFBB559EE0DF09741AFF016CDC1F63C78
+:10FC5000F7CB509F316E06AB27323A4879347F8E0E
+:10FC60001FF5B913E1F2697B4260B07B48AE6E7E4E
+:10FC7000C600977EEDB284795198B841E9E79F6B51
+:10FC800086B17B710B4298A735721C8BAF67A4B00D
+:10FC90003FC92BF277D346100DF657D39E72B07B37
+:10FCA0005BDF0BE502FCAE7ECA1184B8E4D2FB9E9A
+:10FCB000B3813E9A2FAB85C057B3CBEAC68C2B835A
+:10FCC000F84908EB5737EFC679754C70F3FB72FBB8
+:10FCD0008A217E55CFF39EEB4DF9BF8B9D7B311E64
+:10FCE000B7789B31EEB68484DF023E6DF8DDE079B3
+:10FCF000BFEF58D83C140E8FF972E84A1B9BD7F916
+:10FD0000E3E8F797A6F462DEB1E20E65D4217C1B2E
+:10FD10003CE8AF64C6E3B99A5B87BE5E12EBBE985F
+:10FD2000EE16AAFF29CB3DDEB2134BE77882EB1922
+:10FD3000A2846D5E3A4E2397CB9342EFD8F4F983B9
+:10FD400073395C9376B2FD6F735EEC5CD05700172D
+:10FD5000BECFBC74D60B53002F029F1724906ECCDD
+:10FD60005F4D215E8E172FE045C03FBADF4CDFCBE1
+:10FD70008B451702FE84E5DBC53379D1F78403EDAB
+:10FD80002BF3FCAFE3FA57ACA39DD7079A7F3BD781
+:10FD9000B7677BFEED5CAE9BD721F8583C177C6CB7
+:10FDA0005EB798F799D359C8763A7426E44C23A9DC
+:10FDB000F3605C96CB150167314F01AF9E01F25D98
+:10FDC00095E63F18D6A3842AF1B0FC7650A420C74C
+:10FDD000BA2FC4942BA57917F63BD3F508793BD0FD
+:10FDE000BA849C35AF4FC85BB14E2177C57AA75214
+:10FDF0004182F210EE7E90C07FA833D8C3157062A6
+:10FE000041BF0F64FFB9A13EDD7DA3A1FF0F3257B3
+:10FE100018DA2F54D718DA2FF2AC33D47FE4FD95DB
+:10FE2000C9AEDF6C68AFD51E34B44F0987A681DD3B
+:10FE3000FDB7966ACCE73EFFC3BEE7A01E6C7163B8
+:10FE40007D4F4B26967B5B54E4EF7D2D1E2CF7B740
+:10FE500078F1F97FB59463F9428B8665A8C587A5CB
+:10FE6000592ECCFCFD650AD8EDE5A12EF407C68F0E
+:10FE7000AFFB0CE4E1014BA03591C2E99C37997DC1
+:10FE80004E02667DFCE55B37815E77B37BE8DA7A0C
+:10FE9000274B6A0C7BCE45F59DA6A317574D98C0FE
+:10FEA000FEB28BC4CEBBFC6A1CCBF7C17C3D4A9B27
+:10FEB00073ECEC5EDB397324CC4F9C43D879055A44
+:10FEC00006EB68FB4C85F841FFD73A15DC8F22FC26
+:10FED000FCF0256C9A70BFBA3F0EF4775A2A9E57F1
+:10FEE0009A0D0FE97C654DC6BCD64BCAFF82F980DE
+:10FEF0005738D9DFCDBA7CFFCA7FDE44DB499BBFD0
+:10FF00008C9D8710F786BC6E3913BBE12B386300DC
+:10FF100079A09297FDDD9464C5ABF70744F9D771DA
+:10FF2000CC1F98D9CACF0B1C2468C7097EA4EB6BE1
+:10FF300087F90BBEA8752BC1512ED0F7EBA641FF58
+:10FF4000FF0B270420E00080000000001F8B08004A
+:10FF500000000000000BB55A0B74146596BED5D591
+:10FF6000AF904EE88400411E76886020AF4E271D7A
+:10FF7000C26B2812C01762A3B2038A52A0189E490E
+:10FF80000CCC8AA37BBAB11904D6B39B193DAEAE93
+:10FF9000E869705076D6738890B8194D980695C761
+:10FFA000ACA3514141B3D820F258133A121470381F
+:10FFB00087BDF7FE5574572701F4ACC9C9B9F9AB31
+:10FFC000FEFAFFFFBEEFFDAA961D70B98300505DDB
+:10FFD000B63A0F0A904E918EDA902E5BF50398FB9D
+:10FFE000E178D5393017034C95DF08A696009C3D83
+:10FFF000046E1BCE1FD3AE9EDAE1C27F2E5D9660EB
+:020000021000EC
+:1000000000C04A3BFE8FE3B2CEBA8ABEF86F51B849
+:100010001ECC740D7F2EE35FF1BE2630E7C4C6E32D
+:100020002ED4BF4BF376FA55305B009AFDB3998618
+:10003000FD8BC03C0260B7BF86C7EFF957F1788FE0
+:100040003FC0749F7F1DD3BFFAEBF8FE07FE177801
+:10005000FCA13FC4B4D5BF95AF37B89D00FD01CE1C
+:10006000B5560C54F3F06834F6E286F6C999BE141E
+:10007000A4664167D3813C48ED60C9C8403A5B62E1
+:1000800079E0F500A4330DAB787F59E63B2C0FFCEB
+:10009000F1D991DF59A0FD64F4334329C0BD20F8A4
+:1000A0009F55F6DF17A5541AA83912CAEBBECC3EED
+:1000B000B04102B81F02F9F391CEAEACB38C97E811
+:1000C000FE14E709948714F8C274391765423F9308
+:1000D000BA533C289CD0E526032C71ACB1C2700009
+:1000E00094D2B108CAD704125CCE02580C612BD04E
+:1000F000FD3F5A8E45E2E4BC14200BB2F1FC6F5870
+:1001000078BE7E1DE8F9B875E50A19CAD2496E2E87
+:1001100096DB7288F07A36F951778D83F6ABB3D2DD
+:100120003A89FB2E71BC67C5410FFBB6F2F3D7DAF3
+:1001300057D75315C07C9ABF2653A9DB85EB2EEF0A
+:10014000D3F6A06CEA411E4E73E795F5500EFF32D0
+:100150004AE8554E9962571D64A70E30A11EA3218F
+:100160003964C3751665D5A5D2BA6898A980D71722
+:10017000B7C8AC0F302BE641A8B74A4D6FED10FE63
+:100180008CF45239A1723AA0FE166D34F2B3C471E8
+:100190009CE5FE3D34F7C86F153CF39D9CDA9DDF6E
+:1001A000AA09B79CA4F5AA34B9F1753CD7AA366957
+:1001B000DB7B71F356B853324E249363C118920B14
+:1001C000F2E10E93BF1D90D9DF7AB38F337E607B4F
+:1001D0003FEF876DEFA1FD9FB984176E0078D23D88
+:1001E000ED85C0845F4E6FFD8A7DEBDDE44F6827AF
+:1001F000E447BA1ED7A20D019E7B6DB93D1440792C
+:1002000046BD4E33ED1F9542C154D2CB4570AF462B
+:10021000794F6EDE7B88FC64B2DD1126B92113EDC7
+:10022000F17A9DD42E2E4F3C1E0AA6E0FCF16D0102
+:1002300099DC76EC0135E8C0F1980F14D434C699F6
+:10024000F77C32E97DBBBF89E550EFAF671AF39FBA
+:100250009BD8CF60105ECBBE7E3F8387ED268A6B36
+:100260002BB43305D3A0CE8401ABCB314D4E413EF0
+:10027000BAC2E0A6EB45075C413A57719B22A7E260
+:10028000B9BCC7D5209D7B2DAA41B1519C0CC87D1E
+:10029000F1BACD0C611BC6115BA6099438B98E3D2D
+:1002A000170A521CD4E35A7392B0E74997EA658A59
+:1002B0005B4EABBA7513CA13DE4E726F71753FF7A2
+:1002C0003B6E13CBFDEB74DF3B6EA4E0708DF4E569
+:1002D00093FDB4BFF612D94F43B2DB86CF25C66972
+:1002E0003D2EEAEBE872D3E558EDECE2B8BF6C5571
+:1002F00017C7BDC47DAB4DA0D6A3DC3D15AEE25AF9
+:100300005CA77D35CC9B89E33A0BD2BCEEF33FF181
+:10031000947F48F632559ED0AAD0B99CA6ABDA7528
+:10032000F5AAEF78FF5EEF6BFB57B7789D0B1CB11A
+:10033000EB8E2249C479303B4FD863FABC5EBD4F87
+:10034000EC9C6DC85B932EA886BC3519236DFCFD13
+:100350000AFBA386F154E7E386F9B764AE36DCBF47
+:10036000CDB5DE70FF8E9CDF1BC677BA5F34CCBF85
+:10037000AB6C93E1FE4CE53F0CF767C8A048E8730F
+:10038000F952C8427E3607EA99CE8556A60F422713
+:1003900053152D89E80270337D187C4C977B54B936
+:1003A00008ED266AE91C407EDFF1D6DFF3C82E3A5D
+:1003B0007E35DE99E58AE5653D4FFFD47CDCC78A52
+:1003C0007AEAC11E061409BBD5E37DAFFA4988F766
+:1003D000D1228C2778CE686332C799684A9F9024CF
+:1003E000C5E2095AA489F2B1EEB77A7C299EEBFEE8
+:1003F0006805F9D107328C70758F3753CD581A784C
+:10040000E8BA3BE781FCD8FE41132C223BDB8AF49F
+:100410004DE4A3EFDC88D915C74F01F181F6367999
+:10042000CE1488E0F5194E5042387F861D322E508A
+:100430002CBCD495370B03C48C0BA828B4E71FD36E
+:1004400095429277E0E909692772B5B87423EAEF1B
+:10045000A889F981C5526804CAA3A9418CF317A6DB
+:10046000317FF74398F5F800442CC4FF3C008ED34D
+:10047000F3C1C5F42150589FB8727201C6A7850D0B
+:1004800066CF06E4B330BD7338F967FED8C3E9120E
+:100490009E0B4B3B85F82934C13AAA6F743E6A35EE
+:1004A0003E3614291574BEC2F4D60DCFE2FE9D8DE2
+:1004B00026D88CEB9C1CFBF82310978FB77ACA6F59
+:1004C000A579DB245028AF065A6CA12D59B47FE7DB
+:1004D00000CA07FABCE59E8A1945B8EEAC22607DD9
+:1004E00043EB5F80F433D329640F53FAB30CF0B9B4
+:1004F00061BEFC9EFC33C0CF15922C6F0071A18CA5
+:10050000F7E5F1236FBE317B4D1EF313A03A6EABBE
+:10051000479DC7E7B7622CA0F3BF6C0B6DE67AABC3
+:10052000669884E7AC7CC566A2FC7F18E333DC0CDC
+:10053000F0A5DFCEF47FFC4EA65FF933991EF5BB24
+:10054000987EEDCF61BAF0023280FA3B59A4541183
+:100550003FBDF1D17B9C117C4425985DEFE87EBFC7
+:1005600052F3878286E34F25931D34C96EB2D3FCC4
+:1005700046344C3CF799E63121392B5EAEEA13C480
+:100580006741D3A77F185F42CF999D12CE3FD3D446
+:100590003580FC37F17C57E4D16215F2D0CEBB2D0B
+:1005A000AD75033DBFAD71389D10E308083B247D58
+:1005B0004A3DF1B19AEDE4574522DFDF65EB2C713E
+:1005C0003A62FC01951898676AB53C3355BE944A67
+:1005D0007E3193D61D4B767DD347B45F609FF04349
+:1005E000D4EB3C5F9C3FEDD0E4A0D3FC16AB8FFC7A
+:1005F000695BCB6777DF81729831EE36AFEC8ACDDD
+:100600007F9584E025FBBEF8EFCF66F07C276D3543
+:1006100007364D75E2BCFBEDBBDE27113CE03C3AF2
+:10062000350DC7F332A53D44E7BBB2A6A5531C80E8
+:10063000103FFF50CEE43D6462D3DD33AD544F4CE8
+:1006400026A78A8BBB15768C378638DFCF30BE2540
+:1006500073B061FE6DAE6CC3FD3B72720DF7F57D3C
+:10066000A7BB8B0DF3C85FA9DE463E58EFB0450E21
+:100670008D90C80ECE7DB194F99F5342FC47517EB8
+:10068000562C1C4E95AD7FFE590A1B8DBB53C93F9E
+:1006900013EBDA652DAFEE515CBDD7B555E0EB1B22
+:1006A000967AAF677BAB07AFB7AEC538F2078A2340
+:1006B000856FDDEB0CE239B68DBD78830BF9FBB8A5
+:1006C000A8E77A37AAD5BB897674C55E2597B09F0F
+:1006D000FD32503DA4D7BD897604F094560708FA40
+:1006E00053FD7DC627226F7D437EDF2FDEBE351A88
+:1006F0002A32E499422BE617D44FE7DF64D84C172F
+:100700002EE139743D64C7EC1F1EDEF4FEA012BE5C
+:100710001EA0BAB68AF202AE9FEC91C4BACB76BDE7
+:100720003F2823761F561E35CC8727A53D86F19A94
+:100730002CE3F899C97BE29FEF2D1E556E7CD4AA5D
+:10074000629CAE7C4EE27C95785F3FCFD4DD490A57
+:10075000C54D73B38DFBA92AA7028A83AA26CC2391
+:100760003DE4753D3ECC91A1A6A73837405B77FAB2
+:10077000EE24907FC6BA87D156E83C81FF12F9E695
+:10078000705F057C71FB647944FDD79156F74F3F4C
+:10079000E0BC8E3F839B44DF9126E26E41C34993C8
+:1007A00089F25F1F612F05CE88291D69745172007F
+:1007B000D09FAA17A7044C85787F78E7677654FD09
+:1007C00028CFA017EDA8B72F4C2643FE8952CCC3E3
+:1007D000B1677BE61CCA3F77EC4E0A9B7E063F1E44
+:1007E000AA399016960BBF7F90EC46ECA300FA470F
+:1007F000F5EF40DF57A13841FCD378A967C8E1E79E
+:1008000070DDEAFD220EE06D47623F7B7F5C3F0BAF
+:100810001B85FFDAF197EA9D2A084D73106E10468A
+:10082000FF875FCEFF67781C195CE7909FDFDCDDF8
+:10083000AF75BFAF3E28FCFE6CF3F79F509C3F8B1B
+:10084000F92FDEEF75B9E9FE5EFD82CC7EA95F3F30
+:10085000D32CDF1AEA41CE65BA5F296EF6D75AA7C4
+:10086000D8B776E2F9BB29CFD5B6A086A4EEFBE8CF
+:10087000B47A9D0CAEB87DB6EDB42D0A39627C44D5
+:10088000F5FCDAF27DFAE43C415753FE853A2DFE41
+:1008900088BA06F3AA2583F2EA4CC9BD05C9C196F8
+:1008A00081E524BF8312845D1E5EE25E3B9EEF1EE7
+:1008B000B11C5D77507D06993966DAE76E4DAFF76A
+:1008C00068F8D2AC96592328DE7FD6B0E0A042511A
+:1008D000CE93CDFBFD1A025C1F1E4CF30D5D4175DE
+:1008E0006850D8F9C1B4CE76C2A30E4E4C9682128F
+:1008F000AFBF26BEFE3B68F10DAD61BE345C4A1948
+:100900002D5F4EFE09FDB21617519F0149F477EC99
+:1009100007E641CF30CEB018427B14DCB7CA1DE6E3
+:100920003A7529085C20B1BEAF9AF0AD95F24362EA
+:100930003F3AB969D721A9A0071C23C16EAF855BD7
+:1009400024F6C1BDE10F3FA6FBB678E2F0C3C47A3E
+:10095000FD4A5DAAD7555B92439BF13CEF4EFCB735
+:10096000334B71BC724BB293FAEED3AFD802149FE3
+:100970004F6FB68524BC7F3ABDB38DFA90D3DBF3BD
+:10098000DDB802549A5CFFF906E5F93F59D82E000C
+:10099000DCC23FAED8E9634728DED56E499180EAD4
+:1009A0006B55DCD77B40F9F514AE1316EF1814B273
+:1009B00049B13C43FEE1C2D2E2D4CB490A15FDA7BE
+:1009C000F7DDD397F0AB76D39BC3180F939F3CF220
+:1009D000383EB7F4B5140FD5139007ACB7459B4715
+:1009E0006DA2FAF8258BBA97F8AF78FDCE8159B48D
+:1009F000FEA7FD81F88936EF1840F551AC6EEFB9CE
+:100A0000DE3BDB9CDD17F26272D2F1C4757F5CEDD8
+:100A100023BD274B2EBE6E861A6530D945D34CA018
+:100A2000753DB2A4905F76AE4FE63A35D1EE8E7842
+:100A3000449FB24CC71FFA813D93FC47059643740F
+:100A40007DEEE60D28A71F3CE95ABEEE1C79777EA5
+:100A5000BC7DB655BD43F6B9D1C6B8487B92B16EE0
+:100A6000D0E9FF7AD2789F4AFB39030E51B5EAA24A
+:100A7000719C87FD1E3EEF09BA8A1F45BA42937FDB
+:100A8000D7685F87079F5F52FFFBB73E60B96CFC7A
+:100A9000C72F68DF7D0E81C77C20E497D80F54DA1A
+:100AA00005EE01B089CFAB5F3FF9F2E70564872718
+:100AB0001B7347921E17C8AD275E423ECFA4B41EDB
+:100AC0007902E9F67D9FB05E12CF9B88DFB44B12AE
+:100AD000F3BB8CF8C0EBF77A7D72717F7667EEE33B
+:100AE000166CC867F94D95F3FA921EA3A77BE957D8
+:100AF000B473EAEBEBE7D3D7D7E7398B85BE3ED4A7
+:100B0000F0F70E6BEB19D26FC75BB912E18357AEEA
+:100B1000A7B716A4C5D9CB2F85CBDFA7E123874C78
+:100B2000AB7F63457B6CAF7FD6A2C6C7BD9F88C72E
+:100B30005FA907157039078854C2790B9933E37898
+:100B4000A23E2667C0F104ED78129D07FD72A24611
+:100B500061899AC9783BAD873409423C0E4E76BB19
+:100B6000884E927C8C7BE87DC334A819427C98EC3B
+:100B700011C609D7103E8975CBACB4B57766E17E56
+:100B80006BFAC35AAA67D658845F04E627733FA757
+:100B9000CB49CF33E0CC33E497354E7099719DD972
+:100BA0006658674917F36E44391FDCB7E07DC25DB4
+:100BB0003F37D7F4A77D0F3B9ECB974C54E7855228
+:100BC000A867FCE2933F79FF8673BF046522D515C1
+:100BD000F7EEB573DC4FC4271682CAE34A8858CEB5
+:100BE000E1735F8DFD71CB6E88F1F5D5B81F1AA941
+:100BF0004FB83FED292F3D1F28871CCA4BE7935262
+:100C00000B889F5576411FEB93BA99E869A723405B
+:100C1000B8ECF9A46121CAA72F49EA8364CFF81C74
+:100C2000F7B18123C921CA778FC96A15E3D0695604
+:100C300090707EB4BF26970E60B9442DDAFCEF5C4D
+:100C40003C2EA9F0304E09E75D1C97C727E49D9222
+:100C50005C93E8CF2E8BF9133BCD86BC5352A8E1B1
+:100C6000397F77719D3AE982F9AA79E952B1E8773B
+:100C70004BFA996A7AAA179FD5EE07212C0B9C474D
+:100C8000D40BE3AFD89722931EABB47115E535B4FE
+:100C9000AB68AA3D2023BFE39B859D8D37877711E5
+:100CA000C5280BABA8BE68C2BCA79F03E30A64E6D5
+:100CB000B23D8CD3ED14D79A8BF3D64A35DCC7D826
+:100CC000A9AE41BA416AE573FC0A3A992A5A3E2F05
+:100CD0000737D329E0638A76CAF456A8637A3BD4EF
+:100CE000339D0EAD22FF8F0E0739AFC1934EEE0735
+:100CF0006FAB3451DD51F2EB9EFB87462D9EF42EF7
+:100D00000774BCD29F2E876980FE97DD833C86E402
+:100D1000701C499447A29F4E8488CC7E4A01229B36
+:100D2000F00317FB6B05283C9E7A9D72288BA86602
+:100D3000C66F12E551D1B35DECD4ECA2966CAD7FD9
+:100D40004C4F5DC52E1EEBFA42FFCAA43A34518FB8
+:100D5000FAF592E4F22E1786E22F761C9F63C6BC4A
+:100D600054525CBE221BC7EDC5DFCF31633E2B1949
+:100D70005FBE63388ECFECF8418C0BCB8B2D6EECC5
+:100D800062569F9F3305E7ABE49F8544D10F299EB0
+:100D9000A9A23F5EA9D531EAEADFB89DE82FEA5063
+:100DA000879BF8B463B19F847294B3C57BC761B766
+:100DB00086775B70DE718B7A90FC77B93D9CEA4256
+:100DC000F9AF5C3D752085CEA7AD62BECD26705AC9
+:100DD0009D3FBC1E48C2F1F6EDB92BA4E1D73E07FA
+:100DE000AEFF35ADAFAE1E1120FF551B25B7D06C41
+:100DF000F9C0D928C3F6560B106EAAEFF7D468F5E0
+:100E000014E747979BE3F760ADCE69DF9E9B4B7A73
+:100E1000EA2A163818646415931C8F8EF675D1FC77
+:100E2000688AB0B72ECAE5DEDEE9E012E53B9A9F9C
+:100E3000783DFA0D1E009F3797A8E7E97E75F225E9
+:100E4000CEFB678A3E5D1BC98AD9AD844A9B8BFC69
+:100E500007150859393F4C705EA95329DE2DC4751A
+:100E6000501E253E3548216ECCDCCE528AABB8AE42
+:100E7000A904F7A9B6468615E173CFDD73C42AEC41
+:100E80006E88B03B2D2EB5ECDCFFC46031F4419C84
+:100E90009F55EFBCF8C39728BFEAB30E374D8FF9C3
+:100EA000D78B2BB8DF0487218EE87E37AEC9C6F515
+:100EB000F6F8E6510B69DEC44FDBB289AF496D111C
+:100EC0007E8F166DF97CB03887DE879C977E4E3E0C
+:100ED0003EA9E58993769117E8BD30F77B8DE2BD99
+:100EE00070AD8673D6B648A100C71FD13F2FD2F888
+:100EF0005BBEBF710FE1278B363E349DED2824FA8F
+:100F00000A17FE525C587248F4CD4BB71AFB8D6A33
+:100F1000EA9B693E84AD640FCBEB13EE6FACE0BE91
+:100F2000B93A3EFEF7D0377B4B347C6C280C65BE5B
+:100F3000E4B97DD51EE261625F5C05CA8412AE7BB6
+:100F40007D32EDEF35F78C3FF42FD0DF9389FABD7A
+:100F500052DB9BE4E460B958B99FA87D7985DB49F1
+:100F600063CD6F3799A8A7C689EF7D04F1CFE97EDD
+:100F7000BC789DC47D076CECC73658F89A4D217E2D
+:100F80000B5F1BC87D08F64B5C1F6E7ACDB68EC614
+:100F9000C1DFF509C885844377DE40384C3009EB62
+:100FA0004D81E783E4611C867191474BB4B8AFD59E
+:100FB00001102E32F4F3412DFFD7A68C1C889D73AF
+:100FC0006CDEBE4186FE24A8D5DB25744EAA1BB775
+:100FD000DE20EE27093E767DFC0FC954F7369A7D58
+:100FE000C9846B9F3D309CFB98DEE4EEC53404570A
+:100FF000794FE9FD7C7AF6D5F456F28259C84BB3A5
+:10100000DBB7FD0A7C6D89E945E76FAAFC4685954B
+:10101000709187C1493849EDFE578376EA0BD703B3
+:1010200023106741D8F3D953267EEF5E0A39FF3A81
+:1010300001C7DE536677089F6FD0E222BD7F76C579
+:10104000D9994DC37F935C7DC015D74727E7A41B73
+:10105000C629EE1B0CCFF52D1B6EB88FF2DE4CEBC4
+:10106000434069CD2B8DD5BD69CA68C3734FA74E68
+:10107000DBC77EDFFA08E352FD6EF518CF2337CBCE
+:10108000140FE09CA897CAF097FC6D0C0482A48F03
+:1010900071EDC63AAA2C52C77D63D201B30107B0E5
+:1010A0005D0397DA44FE457172080C11712351DE1D
+:1010B000C6EF2F6AF7CB5CEFD50EC54235AB27796B
+:1010C000DF6490B7EE8FBADCFBFB8C721F38DB2835
+:1010D000EF41AA51DE831719E53DB4C628EF1B572F
+:1010E00019E59A1530CA317BDD38C3FC1175E586E8
+:1010F000F1CD2FDC6E983F2A74B7619CBBF53EC3DF
+:10110000FCFCFA0586FB854D4BAE4BFF45E15AC30F
+:10111000BC44FD17EFFBED55F51FC05FA17F607D5F
+:1011200094A13EC2AEFF3F3B38A6C759DD0EAE3399
+:10113000CEBE4D3ECB78C2844880ECA02C99ED64A5
+:1011400046B2883B1FEE3B7B40C1F147AE624B2667
+:10115000D5595AFDE0D3E290DECF24F68D7795493C
+:1011600009EFFB930CEFFBAFF55D9DB7356C1817DE
+:101170001D00FE6EC673C8FD2E51EF7185E1AED223
+:101180005335EF121D7B8ED376B77E55FF3E2FB1C0
+:10119000DF826507F8BDE25CFDBD0C394569777CEF
+:1011A00052EFC7F43E37B1FFD5FBDEEE7D9AA86360
+:1011B000BAF71BEE4C33D7D12AD7D57B259571CE04
+:1011C0004DA3D4C15E2F3501D8279BA84F8E04852F
+:1011D0003015A0F7D051FA9F8A90C0B3F7111E1FA7
+:1011E0004D03C6CF15A9EEBE401E1FDF192915F00D
+:1011F00011FD147BD5115ED4EB31C9B9B698F089D5
+:1012000071DF0EA37A24C72BEA3C9B8C92C2BC34BC
+:1012100070AE0274FDC7746594D71BC34B7AB39B41
+:10122000C4EF931AFC61A666A79BBF5F4AC417234D
+:101230002617D7A781DF4AFCDDCFB774B8B1B13A22
+:10124000E6EC3A0BD731A0F5F30F68F2D7718FB9FE
+:101250001A3FC770894598971F68DACB7A599AD98F
+:10126000AEE125355C8F3F34C4E1E1EFE19462B734
+:10127000C0C9741C64B0FC53EAAE6BF1BF34F3B464
+:1012800001878237FA5DD7FBF218DF62FD63EB0559
+:101290009E796CFD50C6CF63EB9F613CEA819A8FCB
+:1012A0000DFE316FD561833FCC0F1C35DC8F64742C
+:1012B0005A087F8CBC3568DAFD28BF8E465B29E969
+:1012C00003EDE011D2ABBE7E647DEE14DAF7DA7C7A
+:1012D0007ECBE768F3B7B27E753E8FF80FF138E248
+:1012E0008F247C9F26F8D4710E9D5A77438E99DE09
+:1012F000274A7DDC842BF7867FE87E662A1DCEEBAD
+:101300009C37B94E089CA8660CD57F6D930794D383
+:10131000B9DB865ACD828E14E3416576319E762BF9
+:10132000D1A8C5B18E709136497C4F3457525E9921
+:101330008FFB3E314A7D9AFCA17A496701F95F75BE
+:1013400061E44109D7EFEAAF6E20F948D85E0C4A54
+:10135000673EF8BBB353A6408184AEB2C7FBF57DB0
+:10136000D4279EEA13384315CACEC623626C15FEF5
+:10137000F8A1771FFBDF715C8CF80CFC5912F89414
+:1013800023629D89EB64F4579FA77DE97B327ABF86
+:1013900047D7C93E75BC346A11756254AB175FF606
+:1013A0008A7AF69504DA44352EE18F44395E3F336C
+:1013B00092F0F4B31B6D40F52DEEAF984A62DFAFAB
+:1013C0000C405EA88E7DDF2AFA4CCF5F6C618A5399
+:1013D0003AAEFAA6378BD7CBC8167869C63F63DC1E
+:1013E000223F8CB40E9B991277DE03C0387607E15A
+:1013F000D17138F69B5ED1AFC3C322EE75AC1FCC62
+:1014000078FBF2FDC78E50FCBAD7AB36925C1798CA
+:101410005CA5FC7D56EA2EC6CDF67A5DBC2F9E9764
+:10142000F9C538B486F4B4DC1E619CED5AB87A6F05
+:10143000FC772C6C7D3E8F71645701D98DBE2F9E39
+:1014400063AF370EFFD6CF115BE7EA7EA0E3C3FAA6
+:10145000F8E4CB4F8FD4F0FD79BE1EF2EB114D2E88
+:101460006D969EF1F88B5EF11EAF9B7E6E0620FCA2
+:10147000DFD607733FD26FBD82FF8E39C80FE31BE3
+:101480004A11E977F9DD0E37C9595F1FD751DFBC23
+:10149000CA3E5DA37DDF10FF4B6A047EAFDF8F4A3B
+:1014A00042AF81F5024F5DBEF3F091277097C5AF53
+:1014B000E717533ED09F4F9433CA77247F7F278B03
+:1014C000F75F28DFB3B47E226EFF73E51A1D2ADEB4
+:1014D000D346375D1C46DFA72DA7EFE10AC83E04BF
+:1014E000FE050D465C0BE515207CA3FB7B2DE0F78C
+:1014F00063362D9FD8F4E787980DCFD7A7F8924A87
+:10150000F1FC6F697103E7874CF43DB7169F1AB47D
+:10151000BE3B117F696815B86943A695EB68AA7F41
+:10152000E8BE5EFFACFC58E0A62BB3449D4DE7241B
+:101530003D4B87F670BD7005179730DFA31CD3AD08
+:10154000EA9052F2277505E733F946D433BD0FF917
+:10155000EBED1A8E20F2A357CB875E5A87CE95D734
+:1015600097F36489B62FF6178CDF8D0555AB1F34C2
+:10157000FC6DFD1E03FEF07FDDF5EC49303100000F
+:1015800000000000000000001F8B080000000000A9
+:10159000000BFB51CFC0F0030947B0A3F20FA0F13D
+:1015A00067B2A1F2D3B850F9875950F9FE68FAD161
+:1015B000713B13030323137E35F8B0083303830C08
+:1015C00010AB00B10E33F9E680B0BE2803438104AE
+:1015D00003033B90FE23CEC0E00E641702B11790C8
+:1015E000DF02C45381581C287E16484B8931303C99
+:1015F0001185E8B300B23F8B9167A7192F656E1E66
+:10160000C594611359543EAF1A03839B3A03439F19
+:101610000684AF8D24BF1428C6A70661EF976760C4
+:10162000D004F29564B19B7B0028AF0594DFA681BE
+:10163000DFFECD3AA87C0733547E269A7CA30B2A82
+:101640005FC30D95AFE30EA101C062BAC4D8030019
+:1016500000000000000000001F8B080000000000D8
+:10166000000BCD7D0B7C54D599F8B98F99B933997E
+:1016700099DC241398BCE02604081A7012C243C4F3
+:10168000701322468D6182687197BA23AD36A240ED
+:1016900040D6C647CDE41D5E1AC4EE22B874E213EC
+:1016A00094D6D462FFB4AB7402B8D2966A54ACB488
+:1016B000B5DD485D6BFD2BBFA0A2D4D2B2E7FBCE57
+:1016C000B9997B6F2601B4DD5FE3E3E6DC7B1EDFC7
+:1016D000F9CEF73EDF39718A0EA2CE23E40CFCD09E
+:1016E000E71B84FE64269E84741332039E03727883
+:1016F0002A3CA3FC3D7B0696F60AA4008BFD6426DB
+:10170000217984FDE43576AC16A7113296847E3AB1
+:10171000399F96076EAC217E5A7EEB8A3FC2B36337
+:101720007165F5651A21594B7A5FBD9C3E03E198BE
+:10173000102926640B1109C986FE0AA3155E42DA38
+:10174000A0B339848C8966E9D16228E8B440C8BF67
+:101750002A7C20226A322DFBF0D7C43C8C27214EF4
+:10176000122FC28AC219D7F0F6F6FAC6D307ED8C4B
+:101770003AF9F0FF3504E677B676642D1B2F4AFF61
+:101780003943F19293181FFBC9AA379509E0C7FAAC
+:101790005D1FC2FBEAFF93F1B249A95B2BA3F3AD36
+:1017A00011D518D427BD69322D076E93495CA0DF8F
+:1017B000CBBA058776F675E920A4BAD78BF815EA77
+:1017C0007C09F8AE2502CE67DC5DEFF474060839BB
+:1017D000B9D41B42FA5009C9481F3E9F6F371112F6
+:1017E0007799CA8B2B85088E17FA69216D1F5D2C9E
+:1017F000861E07786A16A5C17BA3DE37F938C3E9D0
+:10180000836832C5A3CCE943AE1175F7B42F4F1FDF
+:10181000F217A48FCCB5A676E4FCD70BF13EE3DC3F
+:10182000E9E3CB8E67ACEB70BE6A4638C6DD55E89F
+:101830002674FD1FA85E941A49526FE4752D457EEB
+:101840000FD4103D96A4DD3A584F9C67D4226FF018
+:1018500049D7471A5ADEDB2DEB258D9DB9A46714B5
+:101860007C4801EB7C8D7E9D8D92F64E062DCAAA9A
+:1018700008FDC9BCBF0E75599400DD026D537C484C
+:10188000DD257142F9830449E8710E8148CB4E553C
+:101890008FAD17A014C37531E0530A45CB788E5C29
+:1018A0008F653DC892A86086DFD9E844386460132C
+:1018B0002EEFC228DC18DC30C4990950BEDBB2FE22
+:1018C000B297C4DD54AEAE2B2C25E67530E854102B
+:1018D0000C3ABDFBDCE48A7DBCC55638CFB99D57B8
+:1018E000D6DE35DA148CD64E26EF1A78A2C87B1DC8
+:1018F0007E31AD7BA783EC152E22A435B7230A6F6A
+:101900003BE17F17237D82D0229DB9A52AD013D930
+:1019100029C800A7DB208F603AD6EB211AD2535496
+:10192000B883403DC91B463C19DF47868BD35D54C5
+:10193000EF2BA4FD5ECDBBBD9AEB3352E67867C0BA
+:1019400080BB00E79128D3797C7827FD1FA58F689D
+:1019500089107B5C18FEBD06F421954735F0DE2426
+:101960004F5C82559ED5F06F079E7B73D2744A8F71
+:10197000FD218980B86A79CEA557D1FE5FBD548814
+:10198000B9040E2FAD5FCBE13CAC67E4017DF657A7
+:10199000B9907E6B2FFF2C00E47B7CEFEB72327EE4
+:1019A000AD9DEB48C041FF5B659E1FFD6F0C8C81B8
+:1019B0007C59857464C0B5A2544238FAE70A3118DC
+:1019C000E7E06FFF70DF2514CEC36542C8A521BCD8
+:1019D0003E42C7EBD73F0E8C26278831BE4654C007
+:1019E000A77DFCA1F550424B802FEB55A7B69E8EEC
+:1019F00077AB143A047A8C8C65FAA15E9D5405EBA2
+:101A000023098C3EE60B59D8AED5DB3206D75D5A9A
+:101A10009A545ED55345A196C2F78D93468533E619
+:101A2000181C30D175E35BF9F71D34C13955F00549
+:101A3000DE4DA1BFCC22B3609D3FF22E4A8D939123
+:101A4000FB7BBF4969961D847CD6A4DD77D031FC31
+:101A5000FBAD1269E82D1EFEFE4A41E1F8883AC14D
+:101A60003E33E63D344F6F00E9FB5610BF94D46F10
+:101A7000DDE96E96CDF2C7368F21FC7EC1764A60D5
+:101A80004D345B037E8B2C14A01F99FE3333C18F22
+:101A9000B7EEAE637C6783B73DF0B781F76C7CFC33
+:101AA00091B7A503ECD55607A397B64C31D442861F
+:101AB000D38BB11E061ECF753D360A6EE40F838EA2
+:101AC000EAC5A5A3AEFBD9E8E80EA0A30BFFFE7400
+:101AD000B405E868C63F241D6DFD47A4A344F97210
+:101AE000B41716F2BEFA067EFF20C8E75FEA12CAF4
+:101AF000BD5FCE65F2FF97112617FB4964D30CD06A
+:101B00000747249453FD7AAB0FE1A52631CC03FDA2
+:101B10002E4A7FAF83BD3499CAF526059F74F679A6
+:101B20008BE8F7572FFB2C17F4D7AB746DC1FE264B
+:101B30006450D769FB5786CAD40087B29B95079B30
+:101B40004F45C13EEF1758F927CDA7F4288EB7B1FE
+:101B5000E3728ACF85F02B8563F15C418F25A18BE1
+:101B60009F094E86972A62D1AB745D7E26507A51CA
+:101B7000C2ABD1AE26244CD03F2CA47682C9BE681D
+:101B800004050672B9CA85FACFDEFF2BDC2EB4DB62
+:101B9000718BE79638405FB8C227E401FA5C1816EB
+:101BA000B00CF8574D708BBAA0831E08CF753D025C
+:101BB000FA2F2C13879A845F17EA2E8BDD7582EB40
+:101BC000318A9725CC6F51F3EAA626EA9F30F4AF0D
+:101BD0006D3E23D185310FA37CCDDC13073360DE4E
+:101BE000D54268223454D4BC1B7CE6FE530CFBC6A1
+:101BF0000778FBE5926B52191D4450AF1AF4F4D3E9
+:101C0000B7BFE180F993C51948978B6B248B3DB919
+:101C1000A82AC552BE6EEE35A3DAE12462C28389DA
+:101C2000EEFD3904E994FC37B553289D462B072374
+:101C300068B71C13B4565A4E2D6F1C0FFDDE2DA62F
+:101C4000637DA1BC71F200DA5B0B90FE53789FA913
+:101C5000CE863F14805C9D28924734B04747F70BEF
+:101C6000DA399D1B6547201215E87A6A51B5541A76
+:101C700005DF315DAC4EE6374C10D9BAB54717A930
+:101C80008500D041ABDC48AB6A40FBCFA84FE97878
+:101C9000829809E346F1FD101D77D179D1761E6651
+:101CA0008B90D40B16A59251E6D1665B7F2AFEF588
+:101CB0006472F6560E1FD9CBFA3764526A3AED3F7A
+:101CC000497DE3D9C9FB3F1512493FC0298715E477
+:101CD00087A24A62EE87E8255876F2A22B1856F2C0
+:101CE000293E5DC5224C83B4173FA2CB1AE0218A5E
+:101CF000EBBD81AE6DAE892F37FC45423FFF56B13B
+:101D0000A019E4C686BE5B8846F1E109C60896A71D
+:101D1000DEAC009E365027AB1FC6977B09C0919260
+:101D20004B7FA7E3A4A824A6D1FE64AD372ED2B280
+:101D30005C4D423AFDE453438287CA89FDC1826605
+:101D400099BE6F5B4A503E12901E26FA690BBEA6E2
+:101D50004B403F4B4808006E0B2CC37976142FEB99
+:101D6000CAA7EF4FD6C8183F20A729BC865F4FFDF2
+:101D70000C4F11D161BC0D5924E6453B5847FC3A44
+:101D800055B67EDAD642129F4EBFA7CDEC83F1A3A3
+:101D9000DF228C2F09936B32972744A6F407E33791
+:101DA000AAA1F549E84F21915BC419A67556C3E86D
+:101DB000C7DAF196EA2457027EDB4A281F24917B7A
+:101DC000778822D2412CB46861419271EE16359425
+:101DD0004F46593BE544F847AA9FA82793780674D5
+:101DE000AD0B8017120EE0FCD2C9D08F0EE50C3E71
+:101DF000DF31A401EB056777F701BF65EBBD158007
+:101E00008B6FFBAE7B15D78D3CAC821D4BA12D3C5F
+:101E100093919017A073607E1F8544F43B7C625CB5
+:101E2000D569073E777F109D5F8D605C2E159A50B7
+:101E300080D737296D6097F8494880EFBE901C35F0
+:101E4000DBF5A984962DF11472A4702661221FBFC0
+:101E5000AB7DC03A6A51C34500CC16BFFE5FE03788
+:101E60006DF445D00FFBCCED9F06837DD3E37F045B
+:101E70009E9FB9C7C5D03F0B317F4BA1FF80BC4BA4
+:101E80009D2D5BFC9B34DD5ACEB0F9610B242FCE27
+:101E900033ED6AC2FD2BBD66E298045C14A23AA041
+:101EA00097CD553201FFDFEB65F018F06548F7CCB0
+:101EB00042FD18928F011C142D08C749723A0E4B2F
+:101EC000EC2F22183FA5701DB3C175CC06D7313356
+:101ED0005C8D0A9BAFDD5E8C5692A2060ADC0B225B
+:101EE000F73FA8DD0476E349F2815E0D8413BE124C
+:101EF000F5AC5F656DBC4A3F062B54A2221DD8EDA0
+:101F000046BA4E1F59FCAFD9BCAC1101E641E1B451
+:101F10007E27B9482F5896C8505C78D96C035FDA91
+:101F2000577E43F9EF96430E02FC45F95882EF0EB7
+:101F3000FEF5161E1F5E06FE35C5DFD749D80FF029
+:101F40007D48448C437D485EF34F37C9C9E322B7CF
+:101F50004F6089CD7C4C424190E3B2B7A35FF2233E
+:101F60001A0C7A13CEE03A86989CF732BA8B12A5F7
+:101F700019F56117F33F8D78EA4DDD567FF81B5B4D
+:101F8000ADE59BC9A231102FBDF9410789D17E6F04
+:101F900031FBF7749DDE105584EF1BA4A103EC9276
+:101FA0004E07B33796A94486F8E78AFFF71F336FC9
+:101FB000A4F33909F26006D8EF147C931E591E88E9
+:101FC00039F5E2E1F36B1542B5970823CFAFD3D1D2
+:101FD0005F0BFE77749303ED4C628F83EE91300EAE
+:101FE0006A6A87F07EADCB3ABFB3CDDF3E5F421E5B
+:101FF000C0F92EDF7923DAE723CDC7B933B9BDE9BC
+:1020000095044BDCC7E06B83DEEDFC5D26692CAEEE
+:1020100043D520DA2BBF4B89B5E2FA36CC82F53DA9
+:102020005BFB8BA17DE6176F5FFE25C79F7F96F652
+:102030002B94C105B0DEEB02DD61E04F238EB5923B
+:1020400044F51CFAABE3F9D55130DD86EA05CFB192
+:102050005E2EAD279D43BDC2D1FB3BCEED92977660
+:102060003FEA043BF5C3A7DEAE053BE0D6FF94880C
+:1020700042E9E1F86E1F89A3BD1273827DB39CD241
+:102080005D0CCBF199D798EC614AD1B80EB73EE31D
+:10209000433B62F9B3AE580D6DBFFC87BF9F462826
+:1020A0001E8EB70CFE570ED0F353028BBB4607A60D
+:1020B0005D43DF2F97C9BF8493D0D18D12E3A70F63
+:1020C0007E94B204EC446167DF0DD86FEF571C2E8D
+:1020D000933E5E2239705C5A0FFD88E82E213651FE
+:1020E00060F099FD0123DEFDC12E81C1B7D71173C8
+:1020F000037C3B7B9C115A6FD5CE1348D7F39FF9D5
+:10210000AE1FF0B06AAFD54E5FB5538ABBA6E1F300
+:102110006D7882061566023E193FAFDCB302F5C644
+:10212000CADE0D27809F57ED7558E43FC54B280E3A
+:10213000787D530AD540F9074FFA358AAAF7FB1F75
+:10214000F7035E69BF373A295D2D9C6D6D07FD9FD2
+:102150004A1FDE1FF50CD16F5ED5BB8E8DB7E7EA47
+:102160003F80BC5D45989E32F8F97DF8256BB89E9E
+:10217000592759E35B27C9E199B80FB83323A9FF61
+:102180006CE81583AF6FFDEEC91D513AFE07CFFE17
+:10219000FF1D513A8FDBFEFAF18EBBE9FCC83EB75A
+:1021A0000AF26AD5536FF88909FF8F496C3FE0F84E
+:1021B000AE279FD846F9E4F8AF5C68071E7FE10FB1
+:1021C000E3343AFFE3DFFFD318B053D7BE70D958DA
+:1021D000C0C7DAE7E68F1DCD5E07BA8DB9CCEB1B21
+:1021E000C3FEB5BD026C8210F23C7FDAD6E9C01E98
+:1021F000290E21820F8FBA622E8A9F55F45D6329C2
+:10220000ACDB0AD45750BE87E27BE5EECE13D2B4E6
+:1022100064788FE6884178C6734810D6FD9A859712
+:1022200096C1D311D2804EC820EA097BBB5547E83E
+:10223000FA5E34F27A527BC209F85FB57B1D1BB798
+:1022400097AEA77FF87A7E08BF5C3C7C3D0F48D6EE
+:1022500038D34972DB77B6C1C73D19B8FE23ADE765
+:102260008AE7AE1DD5BF33E4C3D9F05C2F30B8EE9A
+:1022700097F4D725E0C7679F7E625B80AD730D45FD
+:10228000CCF1EF9E1C079BBCEF39066F003939F883
+:10229000824B05BB7AF90B6F22DF1D7FEE55A786B7
+:1022A000FBD3C42B503D799C0CFDF483DE5C29B03C
+:1022B000C2AAC77C71973FB15E2B6375D59A1FDFA9
+:1022C000BF8DEF638C1F56C6FA160B49D6CF2B175E
+:1022D00030FD14CB44BCACD0FA9DAAD7BAAEC26CC8
+:1022E00058CFB71700FD8DB49EC6FC5598FF2CD370
+:1022F000BA3EC6F878247E3DDEE39285D4E1EB7CDD
+:102300009CDB15AB62C29BC9D69D901616DF1B21C4
+:10231000EE6D3CED74E194AD7C6EB437E67F363EF5
+:102320003FFBBCCE0F6F27B9BEB6E3EF83D3C9F531
+:1023300040812C70BDD55D9D6DD2776E07D563F958
+:102340006077364473F213F076F44A28DF3FD829D9
+:10235000A1BD6F97132B47F0EB43C6387BFBA681DB
+:102360003CFB60FF8F383D327A5FB9FB6D6794EBC1
+:102370008598592F407F49D6630EEF6FD5F3C9FB7F
+:102380005BB5FB44D2FEDE97F5AF00FCEFF73B48B0
+:102390009476F17EAF94344E52283B2C7656876F5C
+:1023A000E6D154DA4EF27B3498776B8BFE6614ECF0
+:1023B00091D71C04ED4739F49E8B7E6FF57970BF81
+:1023C000A5D57F33D14CFABBCD86273918463F5A65
+:1023D0000E84CBD85E68CCE2CF3A54D1023791A3B9
+:1023E000B9B0CFF972FE1F64E817E2699A292EF49A
+:1023F0008A4CDA219EF68A2E849A4992B896ADFFCD
+:10240000F05C8968663AD3C78BE6F8A27FFF9D1817
+:10241000D768240D718837915CD2FBB8A9DF879B00
+:102420003416770D8F17CDF13F574383EEA270E43A
+:10243000AE550BC07F1B69FCBC06EBBEAF31FE1A6C
+:102440001E8F203B9F7AEA295A1E0FDF44A0C3B09B
+:102450008E709C66FBCAF3B93C7C89DBCFFB0572AE
+:1024600010ECB0EA7B2232C83B217823C64517E442
+:10247000DE282F33D1E382E0892CD0ABDFF98BB497
+:1024800024199DEEE574D5FCAD27B2A0FD36F757B3
+:102490007299331B46F87278BCEB60E6E55E88EF14
+:1024A000F5DDB2E0F0243ADF6C552210AFC92615F5
+:1024B000DE120A67CE1129E44EB20EC673078FEB07
+:1024C0003DD2A4A2FC7FAC2988E527385E7736157B
+:1024D000E1F3A9A6107EDFDD341BCBBD4DD5F87C22
+:1024E000B6298CEFFD77FDB8CF0978B997F442BCD7
+:1024F000664FD312FCFEC3A6083E1FE7F3590078CF
+:10250000F15AE68FF198BD6DF35A201E63E0D18E2B
+:10251000F779247AD085FBF9820678BF5366F2C535
+:102520008EDF71AE5E01E44BE36D04EDD71D3C6EB2
+:102530006CCCF72199D99B7B383C3F7447BE27C3AD
+:102540007E53756131DA45241C02F9BD4308A79614
+:10255000D02A2F66CE0A9AE570B62FB24736ED2BF9
+:102560008CEB62F19E6D329357E3B5137D69140FC6
+:10257000D5B98206E10463BEFB2BB45C9093FB05E6
+:1025800001D7BB3A57224526BA37FAFB0F59E4FB6D
+:102590001BC9E576828E993C48BF422E02BFF624C5
+:1025A000F18424CAEFFBB2C81E42ED8F7D40972014
+:1025B000177E9B827162C3BFD9C8D73B1D8802F2C8
+:1025C00025DEF2C540FE8CE4F774F0FA1F71B856B0
+:1025D000C8E1D765DC57E6F15712C73826A41C01BD
+:1025E0003D6E732FBDBF8A3EEF9BF3FE51880F7E79
+:1025F000F89C5B03B836951DF39BF148EAE50FCCD8
+:10260000FBF143F2E6540EC6C5FE8744DE96CD725A
+:102610002830E884F6FB046D33EC5F47DF9090FFD1
+:10262000F609B12918C79209FA05FB6E09627E877F
+:10263000D1CE17B2F277BA7B60FB2A9877BD3314FC
+:102640004DC217BF4ED12CFB46AEA0B57D1074E62F
+:102650000C56D6287D96F07987645D02386690081E
+:102660003E67110D9F598EC8E7308FE9A4370BCA1A
+:102670002D29E32E61FB077F37BC298E7F40BC19D3
+:10268000F41A9C53847090BBC4D0440DBD490B9D7B
+:102690002F74081CBF0ACAF3ECA1FDA98697F202A9
+:1026A000D80D8B93A8292807B3DD0C7F8D03273025
+:1026B000BE1B1C472C71F7F67A11F960DB5B6C5F6F
+:1026C000EF647DC1E649B47E05D1EEAFCA1F3E0F6F
+:1026D000833FB629E1D464FB53C6D3E00BA3BC7996
+:1026E000FC0D04E4D0BF8FBF01F38EB2DF726BE04C
+:1026F0007754FC6E5733C8C5F6B7597EC5514F6441
+:10270000AE634642CEB4DFD2301EFC20B72F5C0E43
+:10271000EFC3B9B1EB41DE9DAC5EEBC2A97B59DEE4
+:102720004BE33DDAE6C9DAC8EBB3A371F4FD1B63F2
+:102730005E3B605EA3EC5F18F332D6EB64F5E2C15A
+:102740009B35903385A99124ED86E4C9158B471DEF
+:102750007F07D72B74FE4BCDF439AE51C5FC16A3C1
+:10276000BD315F7B7BFB7C13FBC0E79617D4EB206E
+:102770001940EFDFFFF3B81FBC82A2312C819EA667
+:10278000FCB912E099491AB04CE4DE2CB06F0C7A17
+:10279000DED6F14416EA0539968FF95DE7385E3BDF
+:1027A00009872B80DF4262C86CAF18CFD6213A8FE1
+:1027B000635CD5C5E58098724F30199E87FACFB516
+:1027C000F2FF4642989C8F2B28E72150A8D272FE38
+:1027D0002152BA9EF6570F49A1749C0A99C543A687
+:1027E0001FD27A24165795EA7C263CF2FD0623BEBA
+:1027F000DB4EEE21AA067E45491F5437F8F480339C
+:10280000F2A003F2F0821AE67B3A021181EDC7B121
+:10281000FDA1226E975C262D55C02E692461E5022C
+:10282000E0DB23126179788CAF5DC63E18E7631751
+:10283000E763CAC1589EC4BF3FCFE96B2FD8276852
+:102840004F303ADAC3ED93AAC1C1033EDAAEA8BF56
+:10285000BB12A6F32CD82B2EB04F42F8FD7B60AFF5
+:10286000D0F281B47FBFF2028A979DBA18025CEF62
+:102870006ED2193F34D5E3F74612F5AC06B9F4B081
+:10288000A8029C9D0FB7487E5ADEA50818BF78B8ED
+:10289000A901EBFB4F7BE2E06FEE52E202D8232767
+:1028A00043241405B8A97B04F39AC4E751F14E3FC1
+:1028B0006E973F11FBE8F7F7D37A5B667B709FCC8E
+:1028C000E0AF498D83EA95C0578F1FD35603FC3381
+:1028D000D6E8507F63A800F7299EA4F88275DAB97C
+:1028E000F5A3ADFDF4BB5FEE5C0D7EF0E4BC456886
+:1028F0000FF9957FBF1DCA7EF5E97FC5A7F2A36FCB
+:1029000082BE9E1C132DFBE77EE5E777C2F7CA81E6
+:1029100050552AED67CA91FEAE2BE8B33DB456047C
+:10292000124F4DFF23EE6BEC17D4AF77435CED46AF
+:1029300027D2AB7E546F0676749459F320330F4739
+:10294000206D818C3D48F14E00EFBA0CFDBEE7C80A
+:10295000473A0BFAB3AAFCB4FCC463C77E7A05FD00
+:102960007E60EB1A948BAE8765B4C726FFC75AF218
+:102970000D939C703D2627CD2B7DCFE1627CF4F03A
+:10298000E2EE291A234FE0BF298F572928270E5B33
+:10299000F31C8C7DE11E1279CF81F4CCEC135965C8
+:1029A000FBC8B0E705FB8964BBC8F8241CF198F3A9
+:1029B0009F8B1E12C3C9E2DCA71C32CEAB2D56552D
+:1029C00004EB209FB903F7C948B7757C633C3AFE16
+:1029D00029B37C935506571EA87EBA9E7DCEDF6430
+:1029E00001FCA71A0C3D15473D75B0448C8FA7F02C
+:1029F0003DF0A01883A4CC03D54C6F6D9259BEE076
+:102A0000265E7EEC348909F9093E9ACCF9EDB1874E
+:102A10004566CFC508EA3972FA0CDA175EFE3DBD8D
+:102A2000E43505F727A2BAB762266605F21F13BD83
+:102A3000501C5D14F558E4ACD8986E59FF3C6AB14F
+:102A400058F3A90B12F52590E34714A0DF93D46F38
+:102A500005FA9DC7F789AA8C3C4CE9F47498FF7677
+:102A600043CF1A7933B63CE9C71B9679205EF8A2AA
+:102A7000413FF50D3AFA3FAA0BC733F6098B6E0BAF
+:102A800047417F3A72ADF9D315B6FCE879B6F2F951
+:102A9000C6574A9DF638EAC62948079A1FE55521C8
+:102AA000C7F3E31753773E75789C65A85F1E4720F0
+:102AB000DD7E5CBF424E40F7DD25D5835FE07FA021
+:102AC00034CD9C5F70B993D9DD077FEB2260E7EFCF
+:102AD000AA52309E69E4753AF8B8B54E0DEBED7A1E
+:102AE000F00E05DA77060ADC80AF0373967B30FFC1
+:102AF00083E7A71A72B765CEF22B6F01799829A2E6
+:102B0000EE69CF6DC9867DF907AA14CC3FF5A70CF5
+:102B1000F41EA065EF93CED023F4FBAE8AF81273B7
+:102B2000DCE60E27D35FD73BF93ED0466BFE06E5C9
+:102B300083EB9D901FE66DC07D4B51E179BC36FF64
+:102B4000DEC0877FFFF562BE8F3D0B7CE08F32FADF
+:102B50008871FAD8C1FDD38741FEBB806E98FCDF37
+:102B6000C8FD537BBF13EBC3FB9D6087DDA6964278
+:102B700028CABEBE13BAACF6447ED42AE7C6DBE947
+:102B8000BE21DB523FA7BEC0F2DD17BAC0669FC4AC
+:102B9000995E236C7D3ADDDE0920B74BA9DE6576B0
+:102BA000862A86CDFB2A36BD5EEFD09B9CE761DF8F
+:102BB000F853C20DB03E767B7A035F9FAFCAFA3AF4
+:102BC000E70CF4DF36C093DAC73C5FDD6A7F0C8325
+:102BD000935038A78E0AE783E703E7D9F6D9ECFBD1
+:102BE0006BDF94C25B5FA1CFF254960FD9EE63FE08
+:102BF0007C3BC45169F9C79C0E9F764AD8FF5E3E64
+:102C0000DFF2145A3F097F1BF1D5E721F106EA8D67
+:102C10004D9E670916107ECF49FEFD7927DBCF2E2A
+:102C20001F3FFA38FB601CFADCE8D07FE434C5F1C2
+:102C3000DA9CFA7F9ACB7127DB7F1E5A179E476971
+:102C4000D8637738F43E73FDC4D32A378D7D904C1A
+:102C5000BE9E3EC2F8EFC525CBD64DA4FCECCCF50C
+:102C6000A2FD93B9A46DB5E887FCA37E15FC814C49
+:102C7000BE8F4F1633396AECABA7D758E5AAFDBC17
+:102C8000958BE7C5BBECE76CB87CB5D3E348F2F5B0
+:102C9000774EEBBEC650FC7A04BAB2C7AF1BE15701
+:102CA0006667723B389CBA68EAC8F4F872D3E0A64B
+:102CB000831313E557E0FC4C523A60FB89FEFD7F1D
+:102CC000AC595C06FB762C9ED6DF142F7F676242E0
+:102CD0007E85E7A6BD0871CF70551ACA9BDAE0A7BA
+:102CE0009B0E527FBC4EEF2B7FC734CF7E95423B6D
+:102CF00061143ED11D9F9BF9EB4981D14F3B1FEFE2
+:102D00007E8E4FBB1DDD29465DD0EF2764401792B4
+:102D1000F8B5E679B721DE06BC406723CD3BE46217
+:102D20007CE59FDD1082389DEB8C847CE01A6FD8A7
+:102D30002D21B45BA6BBD2D8B90F6F01EEE3513F92
+:102D40007DB00FD6C1CBF2FB0DFDF8B1114FE57A86
+:102D5000EFF63456DED0C4E2C7AE0317BFA9D17672
+:102D6000BEC30EE2A6EFD751B90E71C02E6AC7C31B
+:102D7000777FD90081387A2BAD1F31F9DDADA14ABB
+:102D800015EC84B6E25245A3DFA5A9655896F34B2E
+:102D9000D54A3AE605AE6FCFCF843878A18879B5A9
+:102DA000C5B4DC4C4DBA54978AF37BB9E81D2FD8D3
+:102DB00067A9E09CCF48ACA7A32CA24B141E475098
+:102DC000AD845C8C21BDCDE98CBE7F04E2254F0A29
+:102DD00091992E3AFF97F9F9AB4E6743D11AF07BE0
+:102DE000E4A80BE2078D0ADB87007A689B9E807B54
+:102DF0001EC7AF938F3BE407F1F5FC441E88426A7F
+:102E00006BA748EA93ADCF152E26E7DA545D1D95E2
+:102E10009E54F9734BFEF45CC64FCE00A5A724F177
+:102E200047BBBC26AE709D2B3391AF441756453E31
+:102E300025CCDE33CEF7BCE3D4AF75D1797CCBCBD8
+:102E4000E5586E3AD2297D5FE9F942729FC567F66F
+:102E5000CF2D7BB50AFC927E07C68BFC13C8BF84BE
+:102E60004DF2F6900B836EF4C9ECA4F5943E629398
+:102E7000595C8200DDA450450CFB907962EC917C9A
+:102E800080B7A77A02EDAF539E482DF3443F1579E2
+:102E9000CCFEDF54E9A937FB01EFA5B0FD97B5DE05
+:102EA0008A67010FC5DE5825BACF909D39869D9F50
+:102EB000023ABE502503820872304C98DE0C294C31
+:102EC000BF56A9705E4A201172266534FD683D57D1
+:102ED000F5941C6BF1003E022CDEE5DB2A6032A08B
+:102EE000D4ABC73DB44EA977519B8BE98B2218A771
+:102EF0006FA6877869FD4FFB9C681FF6FA7264C065
+:102F0000EB3E71D97720FE34F82B17E637F6FEE555
+:102F100002CCBFEFF55DB200E476AF400E51654FD5
+:102F20002A4EE5F064439202FB7CFEF93A817D8EE5
+:102F3000C1174908F2831DC19F97BF331D279E22E9
+:102F4000CEA6EDDCA4CB4DDB853EF77C3C8FD2D505
+:102F5000B3DED22D1791445CC588A754A444B603B0
+:102F60009CED637E5D0F7CD345E194D07ED58300DC
+:102F70007769A688F14792E98D4D8478D9A14015EB
+:102F8000E48F56C825981AEB9FCFD6FBA827F238B6
+:102F9000F453A5D655417CBDEC888672764170F518
+:102FA0004128CF7C8B95DB9D8C5F205E444C72B7B3
+:102FB000E2D4389C5F2FA793B6A0DEAF0BA3F28DAF
+:102FC000EDDC81355FCE4C0790E76EA28388C34C61
+:102FD00007B3291D4C35D3812E9C0F1DDC8BCAFAFB
+:102FE0008BF08FFE66959088DB0DE783D54A7AF1EA
+:102FF000707E31E0585F961E00396AF0853AEB1E0C
+:1030000094ABAE1B9D61F0D70D3E31F8E353B7038F
+:10301000F990F2C9551EFA5CECD52E4BC627E08715
+:1030200098F9E19A11F8A6960C1E0CD046B5328993
+:10303000A65251F2F2C5EF158E33F1811D6FB573B3
+:103040000572CC22CF58D9845775E87CA374EEF86A
+:103050007F4DD6DA03263EECA07E0818CB5D628851
+:10306000805E29F52EFB14E852AEF97E10FC4187F4
+:103070002B5C8F79B3B33E48B999D2E5A763440D71
+:1030800026DFAE2D7B06F9F9680A01FB64D3CCE597
+:1030900018F7FDF496C878D013EB28FE8FA15E8E4A
+:1030A0008D15310773602CDB6FD782EC1909B2F7ED
+:1030B000847F8FF1B2CEEB0D603DBACE16F9B8DE4B
+:1030C000CDF6BBD6BB99BE59E7EC5680DF06F315AB
+:1030D000D59CEF3C4F62766C89C2F79F4EB76A1061
+:1030E0001F2951989ED9D2D48BF6C7BAA6BDF8CC69
+:1030F000A88911C8A7F2144535D8F756FE3A5F7073
+:10310000001F5FC0F667E17DB3C9FECA51181CCA33
+:103110005FA508F0A7D212D5D24D7256118548325C
+:103120003B7AA39BC55F941682DF95FD0FE17E7607
+:10313000466148B809CA2DDD2404F1F3387B1F2805
+:10314000D485AF9BFA0DD4F45AF45C2D5D82D45231
+:10315000B49EF0BC4BBBE6C1FDAFDA40E51FE569AC
+:10316000C3E9087E8E99E8C180DFD8875DCBFDEF8B
+:10317000AA0205F9AFBDD1D903AAF92A85D9459F7D
+:10318000042A473D2F00FBAFD472433F179EB00F78
+:103190001B9DCCF661A10CFBB0F0847D5878C23E3B
+:1031A0002C7C877D58287FAF49C732ECC74219F67F
+:1031B00063A393D9FE2B9461FF159E7B9BEAF1F9E3
+:1031C000E3A606FCFE7C532396E7B9987F438AA2C8
+:1031D00041B097BBEE74EA9067D3C2D7EB805E90A4
+:1031E00011A2EBEA0EB03881FBF00378DED91D1492
+:1031F000316ED7117C807C8D3EBB66F8BA20EEA183
+:103200003CE3C5A75BDE42C01EDB2144EB4988904E
+:103210005BBA4AAA646A2714065757A6D3F2AAAE25
+:10322000596D907738496B0E2D531365CD57BAFC05
+:10323000FBA6F2F8E21ED913023CCF6903790070B5
+:10324000C0A6D9BD5D73AB9A0BA9DF54400D159094
+:103250006BF9CE18D0F3D761BD2602FCCCBEBB8A79
+:10326000B40621AE315E7396021FD2FA7146FFE7B3
+:1032700056BF45D1F0BDBDDD68F5C4B273AA47A401
+:1032800051FA83EFC228FDB49356B59FC2BE0164C4
+:1032900006D8476EB6CFDBE560FCDFE566CFB7DD6D
+:1032A0008C7F7FE8AEAC74D367A59BF177973B5CCE
+:1032B0000DE74D06A78A18DFE975D02EE0F04163CF
+:1032C000FEEB702EE88E9FC904F60F1EE27430717B
+:1032D000BC8FE9E9BB15D4D3978FFF6E5B3A2D4FB6
+:1032E0007C341402BDBB81843C4027D18D22E6A1F1
+:1032F0003C5D3621BD8E56BF70C673E9A07F3E553A
+:1033000098FC89717FA3B9FDE6F11097FAF4552670
+:10331000FF7672B9D3E3E86FC0F59CE1457B853A4F
+:103320000C688F340765CC1F12B3D8D3E950FF095E
+:10333000EA39A9C28F52789C7F99A560FCE3948BEF
+:10334000DF6FD18F768AD31D51D3E8FBEEA888FCBE
+:10335000DEAA7A6260576FF096E2B9D268B18CE764
+:103360004B3614B3F8698AEFBA18D827F7F7B9992A
+:103370007CF02A983F1A2BDE73A832004F51057E4D
+:103380008FE98BAA11EFAAA8621E2AFD0DBFD707ED
+:10339000F03CCA06C2D7A55EC4F374ED633EFFF9E4
+:1033A00045909773931AE2770E609E379A5C22ECF1
+:1033B000070DEE4F0178BE6ADC5730D09242EBB772
+:1033C0002D5343B00ED3D4CA6AC82368572BD1CF2C
+:1033D00049995AA5DC887268E83C06DE8BD1562CE8
+:1033E000631E117C07BE246DE4209C87CFE1B22CC4
+:1033F00025AD5400FBAABD06C37C705EC19257DEAA
+:10340000967E259E43926AD311CE76A22B503F5AC8
+:1034100023A3FECBF12A71B037728C782E1CB13009
+:10342000C51B326EB39ED3C8AA972DE7C2C746AC60
+:10343000E54C1E3FC8B49DE7F85831F6C7AC78B2EA
+:10344000CF3723F0481AC09B010779B5E1F3D912B1
+:1034500028AD8379E6A81E843BA8B65480FC1A4B9D
+:103460001A9A81EECE1B5E1B9CD38ADBFA61DDA724
+:103470006932D1E8F81791C116E87703A7F3AE7C5B
+:10348000AB3E7E48910C7EBC10F8717CA348A2A68E
+:10349000F1210E19358D37A12BDD529ED89D6DA9D6
+:1034A0003F796B81E5FB94D80596EF17EE2CB59428
+:1034B000A7F6CEB1D4BF686FA5A55C12BFD2527F6C
+:1034C000FAA14596F28CFE7FB2D49F757499E5FB04
+:1034D000C503CB2DDF2F796F8DA57CE9E05D96FAD2
+:1034E00086BD6ED78B13B9DD72BE76BA0BEE89B08E
+:1034F000C465AD7E80DD8E57FEDAAAB5805CF33BF5
+:1035000091BE65D0E3B4BCE64EE64729E5210DE463
+:103510004A0E97A3D93EBDD40DFBA97E05F581ECDB
+:1035200065F564EF02B43FC66DA5F2683A589B6436
+:10353000E87B0AC8E5A66879A129DEE456BBF16CF0
+:103540005685BF1AF7378CF6B2AA93880FC6D3D820
+:10355000F96AEAA5423DB746DB9BE6B54F14F10890
+:10356000F420F5F71E31F97B23F977767FEE5CFDC9
+:10357000B77122F1E0B90221DC00CFE286572B219E
+:103580001D98FA75D701FD6E7286EB7B68BF9B0AAA
+:103590003C6C1F94FB755DF9BDC81783F932EA17BF
+:1035A000226BC5E6785C33D74329CAD3E85752BCAF
+:1035B000A3BC35F0BE411888B582DCB9D383F27064
+:1035C000DC7FBB5E03FE520A941C85BE0F1D70EAB1
+:1035D000B0BFB485E3B5402DA984905261B06E3F71
+:1035E0003C2769D4CEA0CFA2A2CDFBE179BB9BE55D
+:1035F000035F10FA7E25C812A59CD97FF23467AC10
+:1036000085F623A9148E247E85F194FC5BD9FE45B2
+:10361000A1FC2ED01B58F567E8142AD215CCF77000
+:10362000031D08F844FA7107BCA837DC70B815CA46
+:10363000B21083FD3FB04F611FAE227D2BAEBB6148
+:10364000B7823D1B617E6E33D057A0C6BADE29CA51
+:10365000F7104F6D028B7B77A569872BE9B85D99D1
+:1036600005E9106385B8489D49DEACE7FAF49F3D53
+:1036700022CF7363F2E6CFD0E78C84BD43E97FAB02
+:103680003801E0EB2620B7DCF77413A077B74A5770
+:1036900013EDFAA816467DCAECDDDB394C55054B17
+:1036A000707FFFE34029DAB7EEC67D49F1E71E904F
+:1036B000883E7D64BCFA276D437D4F0A9C1AD8155D
+:1036C0008D9A53EF49220FA6703F64DD38E33C2BFF
+:1036D000CBEFE9E2F830E2A14371461E4F33E28CB2
+:1036E000463FB767968E1DCD1E7753FF32628277B5
+:1036F0001D1D07F0D27EBAAE1AF12013761EF72FE9
+:10370000C53DEB719F95F9495338BE4B387EC7399B
+:1037100009FA09F3216E92015EED55D5C097469CDA
+:10372000E537606CD17AA12891585CCD61E82DF124
+:10373000CC4508B3E634F2C3D0E4657A8DFEDB07EE
+:10374000E7C6267459CF654EECB696276FB596A797
+:10375000C4AC656A351F01BB006C348C5BECB47E75
+:10376000AF33F603AAD83932858E7C86E95FCBBDAC
+:103770003884EB7F238F2DAF375E01E23577AD556F
+:10378000AF66733D9F6DD39FA53E09E30915870280
+:1037900007C17E34E23E473D9A259FCC88DFD8E5BD
+:1037A000B9E7ADCD847E41BF3CE262710C880F7FEA
+:1037B00096C7E325B93C5E328EC74BF258BCC42194
+:1037C00069AF2C1530FFF3B81B8D97868B589C86FC
+:1037D0009DE7FAA85A7E51D0D87811D378DF2C8A89
+:1037E0005ECED010CB827A46DCC4880BB87D7A25B9
+:1037F000F0EF86D06B0D07289D54FECA45A09FCBE5
+:10380000A4C3879A40BEE5C998B7ADCEBAED3B1EBA
+:103810008843C2775AAECCD7C6221FFCD481F1812F
+:103820004E4ED7C6394423CE92E2617691CB63D80F
+:1038300047510FCFCBF780BD7BE14E2AA32DFA8EE7
+:10384000C5F38CB8DDD45EEBF75E2264A8B0EFBFA1
+:10385000242632FB4AF75698F21A2FE0EB366D69B0
+:10386000FC81A5B4BC9BC44AE1BEB9124E1FA18322
+:10387000D6F3AF638880E79FC61C9142315A7FDA46
+:10388000F3D6EFC5B6F3B117D8CFCBDAF6857C12F5
+:103890003971231D6FA3D620801CDDB894DAF2B4F1
+:1038A0005CE8E1FB4593C824A0C3CB246F280EF845
+:1038B0007D43C2FD2DD7DB93DFBC11F4FAAB2CEFB7
+:1038C000489DA06D8638B2FA7309F5949A424A4A27
+:1038D000BC897DA47F3B1322B02F62C4B59EA2EBAE
+:1038E0000A7A6537F5CB0B1DE067AB58EEA57E393C
+:1038F000949FA57E393CF750BF1CDEFF90FAE5503F
+:10390000DE4BFD7278FE98FAE5F0FE79EA9743798E
+:10391000ADB7A212E262FDB43ED08BA7648F3281B4
+:10392000C2DBA93854A00FBB1CAAA8B85D594C49EA
+:10393000EA2B9D4FE3FE45E5652C4FBA72FDD3B8E7
+:103940007F618EAF99E38F89F8DA8060C4D720E475
+:10395000F93BBECF3014678BB038DBD9FBD18D7EFD
+:1039600030AE39AC1F1EDFFCF0CE5F3FD14A3FAD19
+:1039700098F14097A700CE6D34F0789E9117A35927
+:10398000F2EE57EC69C6BC1867D6910658D73D656C
+:103990005ECC17713A222AC85BBB3F67F871767B11
+:1039A000DA78DAF59B8FDB1546DC749383609E74BE
+:1039B00054A0F604D8174DB1F2771C23C7535FF714
+:1039C000F0F34336B930743E80C77D5C60CDD27968
+:1039D0003A058E0F9EB78EA2B180C5F5CC71554FBA
+:1039E000610C0FA57BBC3ADA7502B5F7D0FE532304
+:1039F0004188A375C0798024F38B7998FE6BCE72D1
+:103A0000A2BDD191C5F240AA72434168DF9A353315
+:103A1000683E1F609C5F38E89BA90C98FA5BE32B1B
+:103A20001855FF49545F6BA3E86BC9C5CEEFB4EEE0
+:103A3000BF588173195DDE65FDE047770503187F88
+:103A4000EFCB9A49064CFD4BC1D9787E43F2327BCD
+:103A5000580A2A680FCB30FFE2447DA3DE3D1E46A4
+:103A600027949D31BEE8F676633D971CC67B235CA8
+:103A7000015099F4A9B2FD384FA1481493BC30C647
+:103A8000FD570F93975DC51115E22C5D4159837366
+:103A9000205D5A29E2B995E3B935CFB0274268C70E
+:103AA000ECE17836FA69E57180D67A27DA73E1C6F7
+:103AB00034B52A03F37577C1BE5697B745817D4962
+:103AC0006756D9A8FDFE84CBEB91FB2D1953351D0C
+:103AD000FBDD03FD3A7DCB54E8D731C2B9A3C31C4B
+:103AE000CE2F6AB7DAF7F128B441733E8AFDE9E3D5
+:103AF000F6A7BDDD8AE20127ACFBBAC7ACE7941D8F
+:103B0000849DDB5AB97735F2F926B91FEDA84DA788
+:103B100085A4E7BF325204CE6F43FEBDC50ECAE195
+:103B2000FC94C3BF03A981BE28895BED96E987ACED
+:103B3000E519FDD6F2ACA3763B487F03ECA0C55C4B
+:103B4000EEF55379CF92610665C047381AAB00B8DD
+:103B5000EB486F33E44938789C7C31D77F0BB97ED2
+:103B600074A7B0786F4EBDC7E27F127ECF5F2EEF95
+:103B70003FAFEAE0EA3610B261C3AED2D06FCDBB40
+:103B8000E2D90A149736FBAA4EB79EE35F68B39F4B
+:103B9000EC765685DC83F9B8D9B6B886B19F0BF3BD
+:103BA00084FB0CECE39FEFB8467F908705F2CDB81D
+:103BB000E705EF15A6EDF3E4B810A278CA6E60E74A
+:103BC0007072D612BD27091DCF49617C310C6FD1AF
+:103BD0007988B7F9FC5DB697DDCF955D25C5343A98
+:103BE0007E767D2FDA038B6EA3F3413BFC0CE6C19E
+:103BF00018F5D3D37AF13CD2B61A81E7E712B46B49
+:103C00008C75DEE665E707EB2E156222B46F28C0DF
+:103C1000F111AE82C4FA523C1D637862F986D75422
+:103C20005BCF39D6D9EC17831E16DADEFFD6C3F682
+:103C3000C50D3EF8F0E2A393C651385608DDD529EC
+:103C400013CE5D5F9AF8C37106F8107E1FC3525FF2
+:103C5000308F57F9818AE73DD206B6134A92B529CB
+:103C6000245A3517E4CFE085022D5F9BF2BDF6AEF6
+:103C70004BE1F8F6E0D360E4B95C3FB8AC3A2F51C1
+:103C8000F6787E82E5001F07B616D97A9BEE7DA1F5
+:103C9000A8DBCEF3E337E864B304B9B5A2BA39942C
+:103CA0009F68970EED8451DA85C96639493BAFD1DB
+:103CB0008EA2AB03EE75E2F3F2F0EF2287C73CBEB3
+:103CC0000C7853352F9E635C20AB9097F165E1181B
+:103CD00073B67947C866C784E1ED28D8CD06FC6283
+:103CE00072F863F0DD3CBE6314F8FFD6F8385B7FF2
+:103CF0004EFEFDBCE1A3D55BC68C3C5F80CB81F75B
+:103D00000D695ED1D4CFFD7D7FC2B8B87C3D09413D
+:103D1000C84B76E82AECE715AB0FA27F2FA755A971
+:103D20006007ACA365B003D6F57663FCBBB8F08141
+:103D30002E20FAE2B887803C984AD4B4DDB4DFA9DB
+:103D4000AA0C27AB887CE94111E2E9E46A82792375
+:103D5000A97D1E763F50FE9C47C1DF4A4B53703F02
+:103D600023256DE6A3CCE865716603FE948A23954E
+:103D7000107F97EB484800B88418A900269B427032
+:103D80007FC3A3EFF9269C032032D34F78470EE878
+:103D9000551E6F1FCB48867439D53ACC5FF9998C84
+:103DA00071ACB170051825CAE2E2F4CD004F718400
+:103DB000762000FC2C5E36352286E2B4FFD213ACAE
+:103DC0001DF9053B3F427D9325CF79137835E4CA31
+:103DD000581E870F2EB5C6A9C9209D336D5FFA8B7B
+:103DE000458F439C62CC30F9CDFC760F8733F504C8
+:103DF0000943FF811AABDEF0F0FC6D8FEDFE988B6E
+:103E00007C0EEBBDCF76FFE1DE30EA011709294ECB
+:103E1000B42F96A2DD60F825DBA022D8E37984DDFB
+:103E2000B76B6F3F93B52741E6A7B83C44514AE9C9
+:103E3000F7E51E1DF30D5DB44CF12838899245DF7E
+:103E4000678B2CDED22C1019CA89F1E29867E052F8
+:103E5000AE6A03FB65BF321DEF4533FCEA5635847D
+:103E60007910A4A8D262371BF95E6B4A0AC6C2F762
+:103E7000D43143712715E8724D6621DAD1FE8C8169
+:103E80007F0639FB598A6F81027215F230E6C0B5A0
+:103E9000B4AE8E2895BBAE53394433D9672EB901E1
+:103EA000E36CAE53E32CEFE34DD673D4BA57AC8238
+:103EB00071B2BD1A3BBF43D436685741ACE7A55D2C
+:103EC000A7B22CF67AA2FF5CCBFB38B56BCCF7FB24
+:103ED0008CDC7F0AD18ACCFD4F18A1FF49B6FED5F4
+:103EE000A4FD27FACDB0F4DB2EB3F86B34E0497AA9
+:103EF000DF64A9B772BC77C6C8FB03255E16D7EC92
+:103F00000C36E0FE4025A18C4FE965DEE963123BEB
+:103F1000C74BD07E23B9D6FD814A4EC722A50C3CA3
+:103F200017205BEF2D2E27F67B8CAD76D111086E16
+:103F3000517A177D65FDB84FF0272F9EF31BC96E90
+:103F4000EE6F22189F2E4F19B81DF6C1AFF48E7375
+:103F5000B607319F19FDF925DEE90BF8BD9F2CAF9F
+:103F60003920225EC29563F19C96D14FD8492682B2
+:103F70005C0C8B2C0F027FE8F8FD99D98FAC4F8237
+:103F80003FFB39F73A5D282F34CDAB1FF20ACDE362
+:103F9000CDCFE9914CF308BBC80C1C8FDBBB43E3CE
+:103FA0008DF962E3BDCAE359C678750BACF3AB7308
+:103FB000AA38BF3ACEC7C678AFC2FC92E0F7ACE3EE
+:103FC000F1BCC9A1F12EB7CEAFCEA5E2FCEAF83D17
+:103FD000BB43E38DF962E319719D4E674303D0E162
+:103FE00048F11D23AE734DE72E4B5C874477CDAF70
+:103FF000282464B3C0E4C7F68DF33AC0FFFBB8666B
+:104000004D11EA156E5FE37DAA541F2F9419BCB5BC
+:10401000B9DE58B3098FDBA81CD127C3390985C085
+:1040200081323837A1E3398A203E1FA1F6BA8EF9D2
+:104030002545F8FD89A610967736CDC6A7D14FD174
+:104040006C76EFD794B94252BBFD752FB3DB37675F
+:10405000A9D77F1DF45B8587E5FBCEBE84E8263BB0
+:104060009A1AD6FBDDB03F741D29011D39692B83D7
+:104070003B50352606EBEF2939D8DF047150D9A122
+:1040800061BEAB96FCEF18BCEC65FEBCCBC5DA9309
+:104090004BD8FDA7B55C3F11A906F38F6A17A6613F
+:1040A0003EC2A2C5BA4FA5785B2C086F14727D077B
+:1040B000E79EAEE54B6DF71702A079E87A05742903
+:1040C00006F7C35D9B7B788940FB0DFBAE413F2328
+:1040D0004C1BA6D37EAEE5FAB6E26D17817804B923
+:1040E000CC89F26BF162AB5FB0D91D57C1CED95C00
+:1040F0001220CDB4DDA21AEB77978BF155D876FF5D
+:104100004BED59EE8331F26DEDF8B1C74D0F79F9F2
+:1041100079251E1F3D498AEFC7335F3C2FD7DEDE6E
+:1041200088833679997CEB7432F9309C0F183CEF18
+:104130007139B8ADE928C6D10CF8B2E59800F23E65
+:10414000A7FEA825EF9D22168D6A639F8048BB4B72
+:10415000500FDBE6B34DD89D35DA7D50D9447E77DC
+:10416000A088FFDD0261F8BCFFE0B5C6854F92B9BB
+:10417000AF149264FCC3E2C1B587A450B396C08B60
+:104180008187FF6B3EDA0278A7CF57E67F52C6FCE5
+:10419000C05CCBDF0730CE6F5D335496896CA2E7ED
+:1041A00085CB9D3AF357078B812E8F5C9A12627FE5
+:1041B000E782DB41F15F8960077DF9FEF53C4B5EEC
+:1041C00033EF77A4F5B2E7539ACE1B27EE3F80FC7E
+:1041D00097E65010ED814C91003F65433E9E9F7DD8
+:1041E0003F66B55B2DF978AD7DBB04881B6E87FCFF
+:1041F00044D339BB9CFA5EA11DECBBE6188B43C4CB
+:10420000693D0A776E7D5C682B4EE47DD9E57AEED8
+:104210006DD67CC1F6B98BD5DD1AE4D55476C3C50D
+:104220005FEBB6B23897517F28DEC5CF9F3A48037F
+:1042300081F3179297C59B83FC5E8EB3E5EF7E26D4
+:1042400046D5FC7CC8DB8D291574FE0F65442A7C9D
+:10425000B4DFAE4069430FD0A71CC23CEFA58D77F9
+:1042600087214EA866248F832FE5F6418D8FC5D315
+:10427000DE72C4F3206EFE8B8CCA1ADF8C24F51B11
+:10428000EFC5FECA47B86FFE261FA3CFED62727955
+:1042900070031FE72B2B44BC47C84D7C783ED55D8F
+:1042A000D83D1BF0B17DE5B650B27396D3D5C85753
+:1042B0007DA638ABBB90DD034048EFC530CF757F9E
+:1042C0007EB8F7193AEFF43F7B51CEA64BAC5F5363
+:1042D000FB9BCCF331DAEFFBD32FF1FCFC3E7EAF3E
+:1042E0003A89165C0E71F64D4619B600A09C3654FC
+:1042F000BE1CFCCA44F9C70BE0EF266D021AA5C428
+:10430000F7DEA6C3A887370984EBE95F2CC0FEF867
+:104310003DEE2FF2EFE5577EF0E8FDA00F663AD1B3
+:10432000DFDCC4ED1D03BEF77DEC9CC2FB1C5F23EC
+:10433000E1B393E3DB0BF80C9C173E3B93E1634145
+:1043400040EF023CBB21138482E0FEB3B216F2AD13
+:104350001F6A22E1AFD3396C0FEDD905678A68FB7C
+:10436000FB93ADC70F33F46E1FC2730CE7E72BF45A
+:10437000860015EB6611EC27091C5B475BD7A96922
+:104380004CCEC11D63F04CE7F6A5E4EA0F42FE8275
+:104390005AF66FB7AB54CE74E4F72F4916277EC296
+:1043A000CFECFEB411E2E22F70FC55A5877702DC5A
+:1043B0006DEA03E8EF39051286FAEB660F10C1D4F7
+:1043C000EE2D3F5B0F0A772FC0EDBC98DD4FEDA3BC
+:1043D000788704395F19837F9D768440FEBB2F78F0
+:1043E00004F35A7D6503C8EF280AB3195D813FA81D
+:1043F00070FBED854D6F2F00BA48970C3ABCBD138A
+:10440000E84C4A9491EE7AD259FB63F7DDDE09FE5F
+:10441000E20E276D037230DB89F68D7D7E8738BC16
+:1044200082AA1F80F90DC3A76BE051B86F60D34417
+:10443000764F4BB9D8BFE46B4097577AD13EA3EF84
+:104440009798CFDB9FE4F83AE963F6D5A63F29F8C1
+:10445000DDBE1E23D1EB6FBF38BDFE76047AFD9D15
+:104460008D5E3F21C9E9F57F46A0D777E1BD1D2FBD
+:10447000F6B244F4ADB0AF2C7FBE6027F4275F35B1
+:1044800077EB33F4297DBE318AAB19122CE79913EF
+:10449000F23EF209F46FDC2B60FC7DA2BB7C23F4BE
+:1044A0003B6BE6569063E7D0EF19C087BDDF5FF046
+:1044B0007ECBAFF44692DD93B0CBCFF2E37FE067E3
+:1044C000F546E29B5FF9597ECA487C13F70FF14D20
+:1044D000AA3FF3EC7C33C8EBD37518EB9F712E7CAD
+:1044E000F3203EDD858C6F70FE7386F30D2111E4A1
+:1044F000938E7CC61745FE159DD15C131F917BAD35
+:104500007C44EEB5F0D1A7FE7B918FECEDFD23DC72
+:104510000778D110FF87A7C13CF40BD536763E69EA
+:1045200000CFE1F690C13E17E609B3BC5C4F34AA58
+:1045300033F3A09FC0BDB3B378FB1DE0A3811F344C
+:1045400093C7B3E47EB2C8379C9F7D65F132F3FD1B
+:104550002E2FF3F6AED47039E0BD870C4C01FB6C06
+:10456000A4759ACFEB9F4ED7E7FB93D0F9D9F450BF
+:10457000BD9FE9A17ADE4FFA9F9506B04FEDFC5E34
+:10458000BEF2C77F7C62947E6EE2EBFF55DECF17F2
+:10459000E0FFAFFA93F02FE5FF1B601D4CFC5F2698
+:1045A0001424E5FF9BFC49E407E5FF9BFD7F5B7E50
+:1045B0005FE34FC2975701BF659E1DDFCF717C3F00
+:1045C000F725F1BD85E37B83FF0BCBDB0DC9F04500
+:1045D000F1BDF11CF1BD65047C3FE8C7F57F16E134
+:1045E000F7695E8C9777CD227BA09F24703C6CEEA0
+:1045F00047D1583F94A73E1128DD977FDE154A76B4
+:10460000FF116DF768B276F3FDAA917CBE1AFC87A4
+:10461000ED5779715F81EAC72793F1C797A0831F90
+:10462000F893C8FD7291C921C77D1777421CEF4BE3
+:10463000F4FF9364FDDFC9E5FAD9EC82D7385DD089
+:1046400079FF977FC670F9D7C3CF270B6AE4177E2F
+:104650008CDB0F5C01F26AC75DE902C4BB72F5B87E
+:10466000007E025EEA43E1980B97F8CC48B4DB2168
+:10467000C705B83F6747832AC07929537F6FFA334C
+:1046800047EECF0E0785EFD77E9477FA6FE0399F1C
+:10469000CFEF7CEDA47DE9FAEFFD4C6EFF0F3CF50A
+:1046A000C956B96DCC430C77B33CDBD9C9FF7EE565
+:1046B000019FCCF558F8B859FEBF3B4457ACBFF347
+:1046C000D53F14BECF387C7FC27E6DF0D9F17236F3
+:1046D0003827819E67FD49A999C3F594BD3FC3CF93
+:1046E00036D609AEC530C77DD4D421FD9D0AFD79EB
+:1046F000DB453C4755CBE549EDEC346EB7AB1EE8E6
+:104700007F3B8FC36FBFED810AD857EFB9472D01AB
+:104710001464D733BDA7DD360EE3ABD9BC5F3BFCD9
+:1047200043ED9DBD53E0EF42D071C7C1B8F3E692AF
+:1047300038F88DA9603760BC42C5BF5F9CEEEA0EB9
+:10474000427C769DD0BD6419E8D52BBCEC5C4C70E6
+:10475000F159EEC56CB1D02D09969DA57E33D65783
+:1047600053BAF1FE9473AEEFEA4E6A67CD4B150D66
+:104770007F62CEA8780D0630EE65E077F8386CFDE4
+:104780002AC20D02E0DB5726A8907AE7A37402F64E
+:104790009258D88F79535797317A21D42F19FDFE2B
+:1047A000950E03AEABFF167019F5461E8FD7B39D5D
+:1047B000B718FA3B635E26C7B0222D7F742823E921
+:1047C000BE82F1EC6C5275B80AF92355C37B193BD4
+:1047D00087F2BE43C145BEBF7FBDC4BC626CDFC9AA
+:1047E000567FE8FE91A082F61FFEFD0E131D75A4F4
+:1047F00032BF554A0BDF9D8AF23784F73FD2F2B7BA
+:10480000B0ACD0B20FCB4DB03E441D2A37E3F720F9
+:10481000AB4F54F59CF04EDB75613B79A89FF5D802
+:10482000AF7768DC8D580E0C95EFC3FAB9ACFEB9C2
+:104830008E33ECFE957E09E7FF89ACA7C2BEE97511
+:104840008D5FC3F8D2F58DB7E0B3AB49AD80389D2D
+:10485000710FC975D77F4D057FFAFA9BB6E0BEBED2
+:10486000D1FF42F03B80FF35B91AEC2567BE187EB8
+:10487000CC9BE0BF041C6D58AE95D97DFE0B679FA5
+:10488000D8D4668ADF29F077D121BF4633DD834152
+:1048900012F2F04941DF9D7A1EF43C7C9E841CA4F8
+:1048A000F4FB89B73016457AAE5493F18D31DF9120
+:1048B000FA37E63B92BC31F066BC5F57C8FF8EAE5C
+:1048C0002D7EE99E5885F93F0B050EA78FDF0BC99A
+:1048D000EBD5D2719E2D46BAD0806E6BB97F67D76B
+:1048E0000FC6B84F0A91D7013F1027BEA774387E74
+:1048F000CF156F46FF63235102F772798A09EE8B59
+:10490000057CC6BE3A936B0F7A8D7214934BC285A9
+:10491000DD28E7DC9A21F7989E54537A75B184FA22
+:1049200041A97FBD3C3805F2402341F8133EB4FC59
+:1049300012DCCF9C2EB132217F7DE920DA3FEA05DF
+:104940007093A3227FFED2A13CC28E2E62DCE6F3DE
+:1049500097209ED733542671385FD0E3192AEB4A4B
+:1049600090960B86CA5128EFE076DFE9D4CF5F6AD4
+:10497000437D16FE0CF8C790AB155CAEFEADE4E9C6
+:10498000FF02CED174B20080000000001F8B08002F
+:1049900000000000000BE57D0B7854D5B5F03E73A8
+:1049A000E695642699BC27BC721240A23C9C040286
+:1049B00041B14E78355E790CF51524C824E1119E7D
+:1049C00001A432ADB60C24202868AC2FEA833B2822
+:1049D000F66AAFF682C55BFE16F907410B2D62AC95
+:1049E000A8F840C3A3151F2511B44CAD2D77ADB564
+:1049F000F7CE9C733203C1B6FFDFFFFBC3D72EF7A0
+:104A000039FBECC75A6BAFB5F65A6BEF612CCC583B
+:104A10002E639BB566CFE8618C85BD565F7F8DB1F7
+:104A2000750CFE0A183B877F5733D6D76367AC9C5B
+:104A3000B1473283291EA83FE98E0EAB13EA398BAA
+:104A400072DC41176385DE2FC295F07DE128C63404
+:104A5000FCB65F166323A15DEF32C59E037010F3B1
+:104A6000288CDEADF240FD1C3763AD009935C2D80D
+:104A700020C61E70C9328C0760A024C2DAE079AA71
+:104A8000C6DF5BB00CCF55075BBC15CA6925CC1FD0
+:104A900081B2C7C1660400F6F258681E033DAA80C1
+:104AA0000A8D37C3DBCC34A8EFACB2F82300331047
+:104AB000BAE2F362AC99EA0DF4580932818FF13908
+:104AC000C1011E286F66AC6A2B8E8B450325308F83
+:104AD000D44B73B2EE825265897519832EFF7D0522
+:104AE0000BCCB43136D413B0637D57694E6A701065
+:104AF00095875079B525CC002F95CC1D518AE27849
+:104B00008191A706DCF171C4C7C3FB7F6B453030D0
+:104B1000D6D6F5BD84374E5503FA79485889788042
+:104B20007E4F55FFFE219CCE4267879D15033DFBBE
+:104B3000DD17602ACE47A3F7CEED53A23DE1FDA2DB
+:104B40001D4B188E77555AFA28A4A3B9DFB7BE7E3D
+:104B5000D81380F7297F7604B626E86F0EE219C6CF
+:104B60007B6845357D07CD6BD63CC666E0548A1917
+:104B700011B4CD899029E71C34BD43FDE0FD2D8C97
+:104B800033C3F581DA890CF05A57AD32B508BFEB63
+:104B9000ACCFCE41F996B6DA096C081442B613F8D8
+:104BA000DC09FFCE41BB419639DE038F6BC3FC3974
+:104BB000D587FFCD62BEF1B9F05DFD5AD3F3F7AFF3
+:104BC000F998A5E37BEB89B69278FB3755D706C6F3
+:104BD0008A7A67E8FF23849FEB35E647BA5DEF4B9F
+:104BE0008B84618A3704A606C696C4DB7BFBAFEADA
+:104BF0000CC48B191FDB05DF1D5A11088CEDDF1566
+:104C00001F7501C5EED12E8C97EEE2A1D65A3A3E21
+:104C100057EB8A07F3FC01631B10CFB300CF771566
+:104C200025C707D4237ABC3D15EAC154C6AB136C23
+:104C300016C043FD14853914C26F3AEB8BF5FC1393
+:104C4000C6E9C66BC6A3195FF52F325F14DAAD7FD4
+:104C5000D0ED030E67BF93F88902D286833CE155FD
+:104C6000F5F33C86E3F7C03F9CE7772A4A5FCE81A5
+:104C700071049B151FE3F33DA69F5F1D0B64441554
+:104C80009AF7B124743FA69FA7797CE6F1A7A0B05C
+:104C900002F9177ABFE89EBDBA7ACC1A1D1418CC57
+:104CA000D8331E77CE1FD2A03C84F9CEC1BAFA9277
+:104CB0008DCA188AEFFBE5D0FA36F3C5D915DA3D6F
+:104CC0007B6DFA75CEF96C46684A67BFD8BEC28262
+:104CD0009D650FE0393055DD7003FCF75BFBB25783
+:104CE000E3B3A55E553B918DF882F912BDFC8C496A
+:104CF000FE6208C3BB55C0DF14E6D45CD0CED5201D
+:104D0000A4CEC15C26F95334976E1EA75B942A94F7
+:104D1000A340BC8CEB07C7E76B1EF752AF9DFA03AD
+:104D20007EFC42CF8F66BCBC55DD3703E5C88138B9
+:104D30005E865C0C5E46E3620639E2C9665105E8B0
+:104D4000DCA138234FC0986A42B707C60E45BCB0F5
+:104D5000B01D44E7514F11D593F3B631F9B798A17F
+:104D60003CADB1B320CEEB7D1BABDEE64218ED5D72
+:104D7000A6935B27B22B8FA25C96E59AD00FA97DF4
+:104D80006044E243C9CFB7385D5195F3E1679D7C3C
+:104D900043F2ACC6F387814427760EE6A9662CD091
+:104DA00070DE6A5AFA1096C1D85AAC02F354330333
+:104DB0007F443DA9A6F58920FFA54E7D722DA7E36E
+:104DC000FD5537EAE89832EBE7616A5CCB32E03FA9
+:104DD0004DD0AF52D02FA5C469A61FC3751A2E613E
+:104DE00091A7148102289FEEE78FE0BA4DA63724E1
+:104DF0003D534AAC5FB5E9F99AB5103F4A3AB2BDA6
+:104E0000C33A70BD06BD567617BD2F21FC043D1276
+:104E10003F1D36D4273342B6D3FA76820533232B8F
+:104E2000F1BB750E1F3EABB36879580FF0E4413DFE
+:104E3000CE4A7C3E5C3F2C0CDF497E42BCA231A1B5
+:104E40006BBF0DE6505086ED81F4C4EFD6EAFA2927
+:104E5000EEDA6FE7BA32B76BFA4E55C17E203BC22D
+:104E6000E7F3E9E4779F4C6E3F9CF60EDB6A294E30
+:104E70008EBF3A67B6DF9A1D2F1F2B70564712E878
+:104E800001D99ED4E7596AD06BC1B9B127F7ED1D9E
+:104E9000857AD87319483276F7EAC7F7EDEBCD90EB
+:104EA0004518EB81D51FDFE77791DDC1CBC898307E
+:104EB000FECDA99D65BFD30BE5E2CE7218CB9BA0BA
+:104EC0003B7605C8EBFB1EDFD70CDF9F3DE220FDE4
+:104ED00075BA2A35828B273B34861D87715BC1CC1E
+:104EE000C90056031046E80CF5A4F92856C01CE08A
+:104EF0003B5BF32988EFC9991AF183556351370C4D
+:104F00002EDBEA53105F3FB2B30621372E9DA2B3CA
+:104F10005F266772BB43F6E370B2704A59BC5DC648
+:104F20007C2B518F582730D22BB0CEC96E93EB5BC0
+:104F3000B6332D93EBCFCEF579E1F53C2D33C17A25
+:104F40003E6059FCE10FD09EFD8DCA9E82A94CF7B0
+:104F50007E8F9EDF18AA2738353497E0AC4C6EBFA1
+:104F6000FC9E056765026CAD7E63FA72E0DFC6EDFC
+:104F70000E1FAAE585B77D7C4FB9867802BAE37724
+:104F8000B3EA1F2C87F7F6FE16B267D7F666D5C8C8
+:104F90004FF6950AD947EB347BD576800F6454DE03
+:104FA0008FEDC9713D903196CAAC4AB3209F2F75E1
+:104FB000723E3F7BE44E6F1DDA952E17AD17FBCA8C
+:104FC000A27B2D5066FB61DC0CE507233B4375702B
+:104FD000B83A93DBA9AB05BE7F20F8CC1943227306
+:104FE000BE5E0CFD3BAD618676B63366A5E7760501
+:104FF000C697804F657BCE182CD2A1D89FF97B3BFA
+:105000003DC779E1F76A3633D83DF7E0F7B908E5EF
+:1050100038D2F838B2CDEDA4F3E762FD99C771D26A
+:1050200033E647889F0732FCF767921DDE664379B7
+:105030007E8BEB37879521DD91C76D0ACAE3495F07
+:105040002BD142C05F4AA51A5955847ACD337118C5
+:10505000F001ABB4F9109FADFD72DCC5BAFE9F1232
+:10506000F47FDDEA71E33803E3C0AE26FE66B9D70C
+:10507000633BE3EA8773F90706974ECFBEAE6D59DF
+:105080005B8CF2376CA3FDD20C673882E3D3D96D09
+:10509000CA392E9735EBF0B8FD3763ACEA4F49EFCC
+:1050A0006ADFC136642FD97F529687A10CDF7D203D
+:1050B0008A1F8E3D73034EA38D79ECC57A7B1077E2
+:1050C0004BC3D1BEE17F334246BBCF6C17D655945C
+:1050D000BE026400BC44AA86219F5D6A213EEBAEFD
+:1050E000BDCCD87D9CCEE39A3CB8AF7A04E504EE03
+:1050F00007C71E1F4B72034C2B6C77F258D51385D4
+:10510000DAEB4316E687811FF4AB1105E676B0A40F
+:105110006DFFD588B70A9B467AAB846DB82E07DF42
+:105120000FF5209E03C20E81FA5CBF799D91FEF0BF
+:10513000ACD57FDC55AFE3BB8315C72FC5FD0AC8CF
+:10514000BD8644FCC4D84AE2EBBDDF4FA5763E7C69
+:1051500040893860FCE3D4AF5F1D81F6EC0F6C3EF4
+:105160008746D3B2205D27F898D8B8FA5DE3747605
+:10517000C07116184E7665E9914A07DAAFAB155A39
+:10518000A712FF3342467B33B818EC32ADAB7D0A31
+:105190008DD9919FBB6B9F9AEDABB399C2AE2A6339
+:1051A000657ABB2A999E92769595F9FF467287B5E6
+:1051B0005951EF4E820789E4C04D195CEE8E533F82
+:1051C00023FA9CAE5035C4D7C1D0272EDC8F1FFCEC
+:1051D0005AE5FB607FAEC18ECBC9E27E814D763051
+:1051E000C8E0BB4D3D9C9195D0D4EEEF5F96DF4675
+:1051F000F4D11E1E8574FC8D8DE470B2F1BA432A81
+:10520000EB078C3931A41094F42B0CA530AB4E3F36
+:1052100014B2C4E3EF9FC5C79F7B07B368D06F6626
+:1052200098F913ED8F653DD8178FB732AA1FCD843B
+:10523000F12DEA6721FE94FBE3145BD8DF13E66FE0
+:10524000DBB9248CFBE442181F8E4383F1A1BE2CF2
+:105250000AA551B938944DB06F289360BF504F7A6A
+:10526000DF3FD497E025A1227A3E203490CA25A1C1
+:10527000A1042F0D9512BC2C7425C181A037B1DE7D
+:10528000A05025C1C1A16BE9F990D075042F0F4D35
+:1052900021E80B4DA3F7A5A17A8265A15A7A3E3485
+:1052A000349FCAC342B752B93CB484E0F0D0ED0495
+:1052B00047849A0856845652BD91A1BBA97C45E803
+:1052C0007E825786EE23382AF428BD97764BAA585B
+:1052D0008F776B333DE8EF000ED7908F93ADBB997E
+:1052E000595C2F1DC8F44FC82A8FD7B35B408FBBC2
+:1052F000BAD60B6671BD9189744DD0DE3441AF537F
+:10530000BE630F0D6071BAADF39EDF9FC14A12EF0D
+:1053100037E2F281CFEFDA2C2EBF36595BFD2AF24D
+:10532000EF62E60BC3A389C35E5750BE6CD6AC5583
+:1053300089ECBB07B26CF4DD2399C1F95900D38A1B
+:105340004EEC45793239EC797534F2CBA09CDF8C88
+:1053500086F60A9B2DB4DDD7986737FAD7B4B18C9F
+:10536000E4A2F42B815D67D0A7EB055E18DBBAAF32
+:1053700098D653BF32AE7FDAAEC1F565FF7E31ED10
+:10538000DF37D9A38A15ED9BA5A0C374F6FFA63518
+:10539000753FC1F7F1F6EC34CEC2B5EC2534B18BD4
+:1053A0005AB4D12900FB6EF4BF94029FF48F0447D6
+:1053B000A74279C0D3E197105EBA35323A0DE0C00A
+:1053C0001DD19750DC0C8EB68D7641F9F27D6C0FB5
+:1053D0002EFFD2566D8C1BCA430FFBF7001BB0F299
+:1053E000B6E098740DC713694A87F16CFA000C3D5A
+:1053F00028577CD6A2C276284E7FB0E3D07E937425
+:10540000710F6B1D9B0DFFD96B99A754C5EFAD6D47
+:10541000299983BAD26733CE1BE7097AE4299857D2
+:105420002F7F54F1E8F864479622E9F018F29BF4D4
+:105430004B6E6ECE22BFE4E6544F2576D9318E797D
+:105440009ED0908FAD8427FBEA62F2C749BE03FC71
+:105450001AECD9F582EF3675DABB89F1BB43C8BFC8
+:105460007F15FC7E5BF07332FC3A9157465E781DE7
+:10547000EF17EB12D6F1CBC8DFC9EA9D12F837E37C
+:1054800079B385ED035D05FD029FF275C5D08FF6FA
+:10549000B1E0EF0BE1F5F8BF18DF462F8057A6E526
+:1054A000909C047EBD14FD63C9E48D5DEC67CCEF78
+:1054B000635DE51CF7DB7A40CEF54D2EE7F666F12D
+:1054C000E749E597903376937FC796CDFB1BEA09B2
+:1054D000A8D989FCD4DE1C839F7A82EAA94479C3C7
+:1054E0000630B2A3D30645C2B84F290C6B652A56C5
+:1054F00043A18C78EC5142FE8722B033AC407F68E8
+:105500002A8AD0A9792C75E87F97EBCD53EBD5AFDC
+:1055100037A9EFE3EB51F245D6E6BBB85F529B02E9
+:10552000F6CB5831EE783BDC0FB2E67B3D36DFA59B
+:1055300093839BBD5E2ACBFAC9F8B72E5BF06FF35D
+:105540002AC2A7735462BBE15BD9AAE0DB0E3FF22B
+:1055500079F85BCC83F64C66F331924F99209F1417
+:10556000924FBCFF5EA1D49F84A17C55769EF00330
+:1055700078526F74FFDFE3E72CB4A9703D8DF2EC35
+:1055800056314E037A48C3753A0AC63E0CF1652778
+:10559000BA6B8CD3511BC52268F702DEA2B86F0F1D
+:1055A0005BDCE467B2DB5BFCB89E993D93E63FD4DD
+:1055B000139C907D9E75E149D34A91A8D3EFFFD902
+:1055C000352EE0BF35459E542CDF0CE5F515D06F28
+:1055D000561B13E575AE91DFDCEF313DFBB9FDCD18
+:1055E000D0DFAE2CFF341C0FF0F57484FE011E2BAF
+:1055F000F9ABBDDDB307E4FA8CAF274FA95C4FB51B
+:1056000083481ECEC176657BC9EC9BA26C2EE74217
+:105610000226B36F24DF5FB47D23C63B3BFBFCEB6C
+:10562000FFAD7DF76FDCC274FEC61E0FB55A35F4B0
+:1056300067703F8DC5D94AEDB985BFD18FFE46E071
+:1056400003673F5EC6BF44FEE2E4788CD078A49F37
+:1056500051FA13D3055F31AB12413D9E5EE1B1D6E5
+:10566000517B6DEC3BD0DE83024F725DA3DC7A7E12
+:1056700010CAA52C2BEED7D19FE4CE8AB78FE58C2C
+:10568000B2B87C62621F77AB1873CB2A5F06BA9CF4
+:10569000C307B91FA5E5877C5D4EECC522AB504E14
+:1056A000F899E681FA294CFEF90DFEE4095F29CC50
+:1056B0000FE33FF0954A50E9C7A26ED8EF4DF429A9
+:1056C00051DC07DA2DCE08EAD2CA1E4E86F14D7B98
+:1056D000BA2582F111FB3185E6692F4B8BA0F01BB7
+:1056E000DBA32203E398670EEC710513D0FFA660DD
+:1056F000ADC1FF65C66367BDE92F7B108F8F5E204C
+:105700004EBB37BB334EBB0BF974D2CC8E66BB1687
+:105710008FD3CAF8638177FBBA4A54590BB87DDA44
+:10572000834556EAED2A5D1C741FB6F3683C0EDA19
+:105730007A893E0EDAD86327DABB3FEE8C83067F88
+:1057400085FAC49FBDB514F9F751DFF667EE457CC5
+:105750003A44BC62E81197867EFAF23DB9389F5709
+:105760004DE39750FAF1CCFBE0C3D9C6F8C219DF7C
+:10577000751951E2ADEC84EB5BFA17E57E18FD87F5
+:105780009E84EBD0886FD97F8DC2F7B5CCA670F917
+:1057900027F428C8974F480E4418E94DBF437902B3
+:1057A000F5CD19DF501FC53D93C81B391EC063FFDF
+:1057B00044F15FE82F619CD59AC3F5588D8DFB4D60
+:1057C0009525E58B715C356E97E2D0F9FB3B84BE85
+:1057D00033C785D48CAFCB83C2EF9D68FEE6F84E0D
+:1057E00087D017882FBD9FFC42F83A6C6BA1F8E177
+:1057F000E1592A5B09ED9C098EC86709BE97F05DE7
+:10580000E49BFE0073787F9DF44C122F3ABCA2817A
+:10581000E2CCE6785AE7FBDA946AD4DFD588475DB4
+:10582000BFE5395CCF4F129039829A07DEDBEB1E61
+:10583000F4308C7FF5FFA23CEC46BF58C70B18BF75
+:10584000603F7093BFA2BAF6CBF2958375F8AC6057
+:105850003C3EBBE7C71E0D9E57F76FCE0DBB92E3D4
+:105860007112B60578BA1B1F8C247F8C2F87FB37EB
+:10587000BBE58F6183785C88ED49A1F869CA9BAA72
+:105880000FED06EC97EB01EE4F5E26E226E6385E62
+:1058900075689141BEA4C51416D1C52FD2AC5BC9A1
+:1058A0003F9B16B3D273F37ACBCA81F53630BEDE96
+:1058B00024FE93D153E2DFFC7CB0C0FBE1DAB91ADD
+:1058C000FA0DEDA989EDE066514F96CDF908C9E2D0
+:1058D000EEB5627D9C098ECC477F55B53DDCBF3B64
+:1058E000EB5CE2E742790E37E7F0FD907BEA1B22A2
+:1058F0008EA736636B52AFA659CF1F8FF59BE2B1CF
+:1059000069C3BAC4F3FE29F1D81F9AE8D7DD78EC51
+:1059100078B11E2F94877293DD68F748789DA0E3D5
+:1059200099600A0B837CBCB552A53814F007E9C70F
+:10593000C30F2A646F466B1DA497EB6B53C83F5B84
+:105940005FAAD2FBFA0D2AE9CF28C88705201F5E7F
+:105950001572C2EC9FAD648A217E3E69588AA13CD3
+:1059600075D6FDAFAE40FF72854DC3FE0E6ADCDF1B
+:105970001CF6AB64BF421BBE28FAA71FB8CA87FA41
+:105980004CF2C341BF4AEB2D7C48F561B7ADC21F55
+:105990007D706D6904F35498128FD36B7DB1FD7ADD
+:1059A0008A03BFE3DD4871CE94BF3E1C08D0FE31B0
+:1059B000A89592DEE4F1D314B14EC7F4A8B811F55E
+:1059C000F887EB6D0CFD461FDE7186D673DB8AC54A
+:1059D000941721FDCBD23F6CF6339BFDCB5DFCCA07
+:1059E000267F72B27C86977212C7EBA5BC4AC61F8F
+:1059F00020B6F67F133926E5C7BB629E637A6CDC5E
+:105A0000B012F0903653253C48BE7CE7EB3B1F4775
+:105A1000399C02FCB18A213EFFE365DC87B0B94ABC
+:105A2000423F72AA94EB983F5112A7CBD4E0DCCE50
+:105A3000322EFF690D4B0C791F66BD925CAE9D5FE7
+:105A40006EADCFE1FE0AB3DE31AF877FB4DEA9AE23
+:105A50007DB004BFAFAE9D1541B8AE87B301E5AFD1
+:105A6000593E98F5C47526391BD70F2A8B0CD58F54
+:105A70005BA37A713D61A7F7675378BE43C8C9E15C
+:105A8000F2D4F427109E4DE1F90E61340AD14EFD97
+:105A9000202DD244FBF2C523904F42CCD716C679B5
+:105AA0007A53C98FD0D28BD753AF49E576F9DE4A06
+:105AB0009AAF2A0DF3E64A5A374D622E3FCE0EF6C4
+:105AC000C885F134F92D29185F18E3B6EE47D74B96
+:105AD000CB680B73B038BEE27921CCA3C0F7F44E8B
+:105AE000C1FD67A9D3DE97ECD4E25CE4CB1FC2FE14
+:105AF00010F8FEC00175FB6698EA01DFD08C447691
+:105B0000BA84E638F291EFBEDD07D7EDEF59703079
+:105B1000B6D75A5DBF01E3C38D3B548A2F4DBFED0D
+:105B20009D4BC8EE36C529D5746709FA539A94542B
+:105B30001FCA1389C7DD6E3BC999A62369B49F6844
+:105B40003AAA88B29BE4A1C4FB5EA857300C7395B7
+:105B5000DC243725FE615E57217E241D2A59F4C0BE
+:105B6000A8A2BF6B5E55E79F572F0FC90FE43335CF
+:105B70003E0FD56DA5F9B5B3541F8E2F24FC43EC11
+:105B8000FD34DAFF493A370A7E94745E24E8DCBEBD
+:105B9000F3CB7BAE84FA2DFE2C8A3AA8BD19E1A185
+:105BA000FD7D37F189C4839C37F0C574FDBCF7ECEB
+:105BB0001C7A3888DFA7A7521C5FDADD32EFC03CC1
+:105BC000FF1AB17F6FC8553AED5EF45FBC9A3DBADB
+:105BD00021B73C417D61EF02BEE763BF951EF645EC
+:105BE00084C5F779C9F21B96E72A179BDFB05CDF03
+:105BF0007F677EC337A7E7AA8BA167A3D5B556C930
+:105C000088E35BEE9B69496B5DD7BF79FD497A28D4
+:105C10003B77FF19E3F866B9B05C5DCC14E867CD5B
+:105C200060BE2ED91D4CA3FC20D37AB990BC01FADA
+:105C30003F8E74482677BA4BFFA7BBD2FFE9F3D15A
+:105C40007F4376E0A7F81EBBEA5946FBC267B18CDA
+:105C5000F2C45E4CFD11DF766432CA6793F931728B
+:105C60003C324FE65798B49AABCBC329F129A82709
+:105C7000BAC11FBFFA07F3C72BE7E78F28ADD3855B
+:105C800082FE0B655EC6F6F3E76574837E6F26A21F
+:105C9000DF72D5D7112CEA3EFDDABAD2AFEDFCF4B3
+:105CA0000B1E277D62675F90FD5E51EB457E19EA12
+:105CB000F14FC6B8F9AE9542EE1401FDE0FDCB39C7
+:105CC0002AC9B51FB1CB486E7FCB62A1F1B683BCA8
+:105CD0007E42E9D63CCF90DE61616B16B4BBFC3AE4
+:105CE00046F13DAFB652C172BE067A5AEBFE7CFF5A
+:105CF000D675BE7FBB80BC52F272893F97217F3A36
+:105D0000358FF57CF2CA9D67B413BAC18FEEBCDC47
+:105D10007F283F7AF32E42AF7603FFC5D85E323933
+:105D2000D1DD3C5058A7AC6756D7FE19F3515CAD96
+:105D300032DDC9F5F63645E8F1D22095DD4E121672
+:105D40007B859E3FBD9DBF574727B62B07E6651154
+:105D5000FE176E5D12B01AF249C2F4FC5EFF694F85
+:105D60003F15F3B45D349FEC89DC0F29E72FF3B4C2
+:105D7000D3C57CB27BF379671FE179ED125FE962ED
+:105D8000BF91516135EC2324DE96AB0105FDE89906
+:105D9000390CD324609F3048413F57A6DF585FE25B
+:105DA0003B97ADFF5CC594AF2AE3FB5CDCCF0CC135
+:105DB000F7BAE709F6AF409F12CC1FBB314FEC4F4B
+:105DC000ECCC8BFA88A935E7E523DDFE647A5E37F3
+:105DD000F627F57932DE6ED47B5B5358423FC3E73A
+:105DE000623D80BD42FE6655E8B9B16D4594EFB2A3
+:105DF000D4AD91FF41557DCE09455DBFCFF4C3F2CF
+:105E0000D6E123BB2A9569BA79E706B20CE5FCEA2C
+:105E10001E86FA05C162C3FB9E0D9719DEF75E5C14
+:105E200066281786AE30D42F02C4EACB7DD7FE9BFE
+:105E3000A17EFF96EF18CA0336DE6CA87F69A4CE58
+:105E4000F07EE0D3F30CEF076F5D6A285FBEE3FBE3
+:105E500086FA4DC28F6CC6CBF63C6E173559B91C0D
+:105E60005AE92A23FF6693CBE8DFBC47D4ABCC18B2
+:105E700055827EF5A663A52588EFBDE957909F3D25
+:105E8000195F98E55A32796A7EFE9CA0F7A997ECD3
+:105E900016E4EB457B60DD5E0E65D7BB6B704EEBA9
+:105EA00006F1F8AC8DF17C2119AF91DF77C66BACB0
+:105EB0003EEEAF4D77B1BB12F0C53D795A427FAA95
+:105EC000E4A3647893FC7821BCBD20EAFDBD787B17
+:105ED0005FE1F9AE7A7DB02DC1B84E897505FAE65D
+:105EE000B53C6E0F0D4B254BDE43EBF162F5811C8B
+:105EF00007E8837751BF98F3744F55BF31FB610DAD
+:105F0000EBCFE6F52DBE12A44B327FFAA9BC2EFED4
+:105F1000F406EE4F4F35E0ED7DB9DE4D7EBDA6F4C3
+:105F2000AFC89FDE64F79574C79FFE3E7C8BFDBDB6
+:105F30008074CED5D157F8E393EDA3428CEDC7F32F
+:105F400010CC65D5F4FBA664FB6329CF617F5C822E
+:105F500071DA16DC7F2909F5A035BF9CF6CFA40FB6
+:105F60005A400F3AC84FC0F66B505E3EC6C2EED2E2
+:105F7000E2F396F6BC83F99C7695E89A9A8F78F9C5
+:105F8000215B96A2FE43F699B9F917A1E7D985E3FB
+:105F90007D64A74D84F9AFD2EDAF257ECCF13D896C
+:105FA0009F893E1EBF5B0DFA11E37BBB73B99E5EFA
+:105FB0000DFB6FC4A3273BE0ED83F63C3C7F02C999
+:105FC000913B9CD68FC4AB39CED75DB933229FF3BA
+:105FD000A3CE8E1B919FC03F133FAFC2E7BF54ECCF
+:105FE0009FC7A983B6A21FF374CC4E785319CFBBB9
+:105FF0006CDC676311A223CF5F9674B4C5D6B4A2DC
+:106000007EB63173BEB29681F3B7EDE3E7C4580EA6
+:106010007F1F66CE9568F7645418F557A6DFA8BFB2
+:10602000B2ABB24CFACCA8BFF2AB8DFAAB2068D4BD
+:106030005F3D1BCA4CFACCA8BF0A43A34DFACCA8BB
+:10604000BFFAAEFD8E499F19F5D7808D46FD756963
+:10605000C4A8BF063EBDD4A4CF8CFAEBF21DAB0C96
+:10606000EF4BA37719DE0FDDF72343B9BCF51143DE
+:10607000FD39FB7F4E793D230E3F61A837B2EDA776
+:10608000867A80F056CCFF9E492461ECCA93CF1BE0
+:10609000DECF14F6DA551DBF34B4C35A781E771814
+:1060A000FE21BD3E62413B1A2956D6F14A4FA0EB74
+:1060B000A288E28B42B5B93BB60DC7717CFAC135F7
+:1060C000FBB09D391B8DF9DF7323C672232BCE40A5
+:1060D000B9D0087C11013E998F79E13AF9369F2DAC
+:1060E00016E702BBC76773F65FC7289F34EC6FC51E
+:1060F000BC77394FC96F7EC16F727C72BEF3C1FE2F
+:106100008B6AF179FAE11FDF6FB6D9916F67EF50B3
+:10611000D8234AD7F934ECBC6F4DCF04F332CFC348
+:106120006C87FE24DF183F19A7BA285E70FA90EA40
+:10613000E3FE46E33A5CBA9FC709963EA790BFCEFE
+:106140008C0F699F26C38B1AE6FB86C61C1689E84E
+:10615000D69F26F0E1F01AD7DF69FC0F1CCF636AE7
+:1061600004F38D52B45433BF0D8FB2AE784E2B3141
+:10617000AE53339EDDBE1E09F94A837F388ED9E2C5
+:10618000FCA199AFCC785FB4E33E3BCAC38BC5FB9F
+:106190009BF989E312A0ED86D913E4D749BCC2BEAE
+:1061A000FD3DD423C9F6B31FE55FF47EF6A3FC7F63
+:1061B000EC7EF6F4F9F45C3BFADBC0BE34FBD9CCE0
+:1061C0007A58D9B9E7CF4A3AF9B5DB1CB8EE823E26
+:1061D00027CF8331E9C99212839EECDCF71E536806
+:1061E000DFBB2DC3AF78613CAF64F82D08A766F81C
+:1061F00055AF6EBE4D80173AF7037A6A5B023BF1EA
+:106200006AAFB48F02E437595DC9EB9BEB0DF0F236
+:106210007342BB73877BC9FE3C5AEA25FBD33DFC26
+:10622000BCF6E7BD224E7437C621FBC7F383368820
+:10623000780D2C3B3FD26DB52DE0D5E70FA77A3313
+:10624000499FA68F7CBE15F3A89B3C168FA221E424
+:10625000F9DCCD2E6BD516F15D8EE13B3E4E15F18E
+:106260000D78B5BAAC5FE9F9F66A2FE3E7AF92CCE7
+:10627000F36A2F8F13DB587003DA43323E6C3B56C0
+:10628000E94479D7C4FC1E2E277D1E7DFE878DF143
+:1062900078F068111F96CF55CF37CBC3FA6D46F013
+:1062A0005BDE047958CB32FC57237D43D6B003ED37
+:1062B000CE9033F1BE789C57C4EDC47CC10025BE9E
+:1062C000A271A8171FFF017B3380FD2E57C39427AF
+:1062D000D9E41E5E127475DFCF35CDDBC53E9AE67C
+:1062E0003D8F7D04F6E9643C47E6CFE861A56D8704
+:1062F000D55782F85E8BFF3D92FCB475889F2E794E
+:10630000AFE21C2EECE3CE9BC72BDBD995E59FEBD0
+:10631000E5F986F3B13DFF004FB3AA6B27FD02ED0F
+:10632000483F4737FC56DFF326F05B2D577D27515A
+:10633000BF77178FCDDE2EFEC266EF79FC85678FA3
+:106340000CC8C078B6F47799EBC97391B2BC36D358
+:10635000D8FF9A325EBE57D0EF77E27E8A27C538E3
+:106360009CA6F3A2CE098CEEE990E74C653B4F7AF0
+:10637000DD54FF8EECD14FE278D71429B40F5D9332
+:10638000A918F6A3B7782B9F447A3C2EFA7B52F0DB
+:10639000EFE662EECF31E761CE11F5E7784713C43F
+:1063A00073AD28C7ECAA9A108F4F7BF9F8274343A7
+:1063B000941F27FC6EF50F2A62FF64BC1701D6F903
+:1063C0005B69207F8EAFB7D1B9D759AA6B0DF26345
+:1063D000B27B0E6A070528FFE9EF3D3F86F84CCBFC
+:1063E000EAAA57A3DE4E7BC67791E7C87ECDF1D3EC
+:1063F000BD787F5B2AE7D30EB78BFCE6E67A4705CC
+:10640000FDD70BBF06CA75D42F592A5B9C48CF1CF9
+:106410001572F59B9F6BE6F77964BB5CF49DF95CA4
+:10642000739BBD6D753E8EF72AC587E717F26B3CEF
+:10643000BBF373F01CA3463EBE35452CBD02DF976F
+:106440005AE87DE6F59E3536CCFBD61866EE331B52
+:10645000F4E3867E520A781C677DF8BADDF9502F86
+:1064600043EB60C583E8BCF7782FAEDB6A9E3F6FD5
+:106470009EDF57021FAED5B0BF407C6889F3D0BF06
+:1064800012780079F367A447A5C6B6F373593C0F99
+:1064900016D992F2157D3C5F3B0DF39DFA7279831C
+:1064A000EFBFCE1A730EBF93EB4B15F8369FE74E36
+:1064B00029B8B8F3DC936B128FB75F01E787C31974
+:1064C000818C02E877F2A895DC1FF6F5B973EA70C3
+:1064D000348EF93A81EF19FA2B5272B81C4ED1342E
+:1064E00092CBCCA3509EAB53F3356039C57585472D
+:1064F000453BD9C1E3926CA685E1FD2A63443BFE8E
+:106500006AA6FCA184FB65B99CB5B23F48FE57055D
+:106510007286A39EE57F603FAD4F83F98C711DA00D
+:10652000F8644ABFC59578AEE1E519BC8D1F2539E1
+:106530003720CFBB779EEB0F470E18CEF5DB1E3D05
+:106540006038D7CF1E3DF0F79CEBAF2C78F4C03FFE
+:10655000F35CBF946787D5E0E1DB01FF370053852B
+:10656000CA105A590DD1DB4B78BB5EE039FC15E0FF
+:10657000D919C7F30D3BF713FE0EDB60DCD0BF6DFE
+:106580003447B5EDFB199126928B11EAF74667CB9C
+:1065900038DC77B6DB3B8660BFED2FBEDD3B0CF20F
+:1065A000E4C80FCEB819F0DF87D60E373E3F79C763
+:1065B0001B6EC4D7913B54B2D7E85CB42E1FA95EC2
+:1065C000F0D54B05819B91AF66ACF8EB70BD3DCE2D
+:1065D00042B9A47FE746544ABD92F26FFED3698266
+:1065E000E97879E1D66C4359EAE5858EC4E7D41F92
+:1065F00011EB62EEB39BED3D35EC3FB800FB3F295C
+:10660000F21B4E6E77D33E4C8EA7EED9523BEE3B3B
+:106610003FDCE96051F203B7DA18F9B3FC13943C9C
+:10662000BCC788FF99C7F9CAAE346A6FD6832AF906
+:106630009D6AA1AF10E035B8732EDF079BE631EB02
+:1066400088361EE5D5AC750A0B6BBCFE1D787F46FF
+:10665000E84E8AC398E769D62F7392DC9F3367E7C9
+:10666000DDF4FD4CE6BF1BEDD9592DE6F7D77C8450
+:106670004C3EE702F19C7B0B84DE19CE469CEB4B33
+:10668000F1A38CC1DA85F5CEC9157C917EB2C249E1
+:10669000F0B3151E823717703E9EBF63F72B3D691E
+:1066A00099B70E47BDF4D6BEFAB49BB5B8DD3D7CB4
+:1066B000F3AD7B1EA5AAC6FCCC1A81F711222F735D
+:1066C0008E38F7507EF8FC799935888F215DC72B7D
+:1066D000EDEC1A93DF57DADD667C9CDE37260DF988
+:1066E000E3F902B1CF1D017851FF7EBC24FB6EA1FE
+:1066F000CAEF4D333F97EBE866C1D733B74C59D358
+:1067000003FA6F7AF1A33E6DC4A7DC7F512EF055DA
+:10671000EE5AD38AF32F6726BF61981D623A7E0630
+:106720007E5251EF98F956F2133BC4BF770ABF4629
+:1067300027BFEEDC40F8957C85271D2C68C381E5DA
+:1067400062A9B8F03D57B35A8CE553B6B63E284F10
+:10675000E698FC0DA794C4FBB7BD05C51C0F9A7F36
+:106760003CE65FCC628135DC3FCFEFC739696D799C
+:10677000E5765CE75BF83A5BF88BE7FE1BE5D7BC98
+:10678000FF7A301DE5D7C7D6963CEC6FC153ABD32B
+:10679000FD28C7ACE174FCFEE3889AF01C71510F30
+:1067A00045E6EBBB304F6D11B11AFC6F667812CA2B
+:1067B000CF3F3D65F3A01FB6F16947D401F858B447
+:1067C0009DE311CA4779F94EC257E30EE3BA9CF72D
+:1067D0001F0FE669E40F08F714F8EB89227CD11645
+:1067E0001BE5B52E3AA4FAB09B46D641F3337F8F12
+:1067F000E38801DD1AB7AAB5F68CAEEFC112B2E399
+:106800007A6BDCCEE9D9B89DD3ABD164873608B9B1
+:106810006DE6FFCC1E46BE07FC905F4DE6DBB2087E
+:1068200097DF4DCF3C3CE4288CEFB32DBF4D57068E
+:10683000C5F99F615628E0EDF4D6FA19F6F3DCD7D6
+:10684000734AAC934EBD20F490B60306960FC59DD7
+:106850001C2EB045D3AF04BC2CD86CF385E1F1827B
+:10686000E754BF0BEDA8771C74FFC4FCE75E7EEB1A
+:106870000A18DFFC6DB69C097C1A2E94DF925E8D9F
+:10688000C8E76571FACCFBF9CB76CCD3C4E7776463
+:10689000C5E9347FDB6E3BE67D9AF13966EB6E3BF2
+:1068A0005F6F267A6D3D3A1EF576D33367EDC80FDC
+:1068B0001FEF52587E51D7EF1B36BF9C8E7206F1E8
+:1068C00084FA45D2AD938E5DE8179DF4CB6154CF29
+:1068D00083719E0BD1F1733C83504EFCFEB35FC2BB
+:1068E000381ADE75F8100F0D3FBB351DE7F39175B3
+:1068F00031E7FBC757E7A1DE6EB085F33C04F9F33F
+:10690000864DDF257E9CF3FA77F97D4ECC5F80EBD8
+:1069100019E65B80F39CF5D80D34CFD92C48FCD810
+:10692000F038BFDFF04B2BAB4AB41F784CAC9B8FD9
+:106930009E70D0E6E1233BE3F785FC4E15F7612D11
+:10694000217BE5BB62CE20A1A9FCA553D0AB878CEF
+:10695000FB73F9D6286A356EB993E4DB27BDFDF9E0
+:10696000B8FE010F46FFECEBE3F2855CA47B5DE82B
+:106970003BE0BF31F81CEBB7DAFC29430CDF89FCA4
+:106980005BDEFF32D13F8C3B15FD7C1FE519F7B96B
+:1069900012FEB687F4ABB156A6E7B3647260CB3A89
+:1069A000E2AF2F0E7139B32832A58ADEB7DAA2F929
+:1069B000F83EB2FB7A85E404D82189D6F9169B58B3
+:1069C000E7C6F7304EABA2C7EF2E7E7E4FF2CBEC80
+:1069D00007A0BE6E5DC7F9C71E7F5E145FAF327F32
+:1069E000638EC99E93D02C271E32C909F93D7B2C9A
+:1069F00037E1F988B87C0813FE16D8223F7904D70E
+:106A0000F53B0E3A17B9E0391BDDEFF3E9B37BDE56
+:106A1000BA19F8FFD3AD723D1BE5AF793D373C7F26
+:106A2000034BB49E3FCD09B084EB199E275CCF3950
+:106A3000FCBCC1FF29F93B2789FCDDDD43D8633A63
+:106A4000BBE34A287EF2D3F985B43F33E157E2D560
+:106A50002C4FABD158C8ED2A4FE1EF10D3E153E2F0
+:106A600051F2E9BCFF5C48FD74F2B3E457C9CF9D15
+:106A7000FC6A9EB7119FE6F7CDB877CA8DD3DFB613
+:106A80000AF6E518AF7D51A5FCBC76AD233D0BFAA7
+:106A90005D2DF27BDA3DA29CC9CB1DB9F635284F9E
+:106AA000E4F38E149EEFD01EE848CFD4ED078EEEAF
+:106AB00054D3F13C405B24715E06656CE4E2E9D698
+:106AC00064EF57D27A684FE5FEBEF654EEE71BA797
+:106AD000BAFA84707FD7C2E34B3357DE948EFBFB48
+:106AE000F69D7D2757E37E60BFCA738EC27E6B0121
+:106AF000E0B79E4F9D9D64E18746A1FDBE73FE04F5
+:106B00006C67E67A235E66BBB6D8B19D2FD91D04AB
+:106B1000673F608BF309FC6F1EE66B219F3F667A2F
+:106B2000BEF35AE2AB7926BE0A225F25384FE2EA6D
+:106B300029F8AA9495F2FDB6888F09B9374E1D340D
+:106B4000B91AF329F7F1F31EA777AA6C0DCEF759FE
+:106B5000112F0BE712BF2E02FED6FB4D3F43BE1B8B
+:106B6000905CCF7FF6C291E1B7439505FFFDDE90C3
+:106B700047017EF6DFEF5CF22B2CFFE2ED3EEFB13A
+:106B8000AEF5C7ECFAF32D94D7B9CB41F79AB6EF2F
+:106B9000FA759FDBB1FC4B07DD2FDABE8AEFB3C37A
+:106BA000BBDCA4FFDB7B737BB1E9C5B343DA487F71
+:106BB000F17B8347F4E4E73E4EEFFCCB070AE6F3B4
+:106BC000ED8459A17C14FBB7C65FA6D03EBDFDC5C0
+:106BD000B386FDE9DF3B9F45E2DC55BB9B55E339BE
+:106BE000E9F64C7E4EB5F157239FC473970BB7EF70
+:106BF000B6D7C3FB31FFFBAF43500EB53FCFED0E11
+:106C0000B08737311F63A31FBD67830DE8770A6D17
+:106C1000445833EF3D7A7062785022BC703CB40324
+:106C20001E705E809706949FC9F031B5273F7FFCA8
+:106C3000AF878FCF6FC1FE17EC1C41F70CC7F1A2D5
+:106C4000F8F97337E57BC0FCF9F35D6787A01D7524
+:106C5000A1F92EFFFF6CBE0FFECBCE97F37BEF9E0C
+:106C60005C1F99F9BE2B5FFFE2362AFFCCEDA3F142
+:106C70007673BDBFF02FBBDEFF39F47EE35F76BED7
+:106C800017A2F77E416FB707E332ED2FFEB50FBBBA
+:106C900088799FFE7F74DE9D768FC5E71C06E37BB7
+:106CA00097456EA85492E78F16F632EE33E43DDC3A
+:106CB000937266931D31C9CFFD314DAC6C1F9EB3ED
+:106CC0000BFB558A5F50F20EE0A1F5FAD208E58978
+:106CD00059C3FD1FC2BCB11B17FAF87D65C6FDD7AD
+:106CE000A4BCAA2AB4E70EAE847141BD836E8BA703
+:106CF00009A630D9AF92FD0790ECBE37475F4B79BC
+:106D000028932B8CFB909B4DFB899BAA8DEF6F6486
+:106D10004FE462BEDF8D0D36CA4FBAC154FFAF3D9E
+:106D20003D44D79BD8E2D5DC9F7371789A2CF0D480
+:106D3000150FE7C75B173C89FD26E50E695DF1E697
+:106D400008F2FDA7035E087B4BE4E52DED163E99A6
+:106D5000D8973A44D712BF0E3FBF7754D72EE1459C
+:106D6000E2FD62F12DE964C6BBC4AFC49B990EC5B8
+:106D700078DE53679FC7A1F15E6D26ECC6499D760C
+:106D8000A38BF0F8DA167E5EE2B58AFAF5A5587E96
+:106D900096DF07FFE5A8A1CC09F33D68633B282EE9
+:106DA000E4F76B9EE1F1FC19A5E2D7149FC0FC4506
+:106DB000FD7E15F317F5F3C2FC457D19F317F5F5C4
+:106DC000317F51FF1EF317F5EF317F515FC6FC4550
+:106DD0007D7DCC5FD497317F515F1FF317F565CC74
+:106DE0005FD4D7C7FC45FD7BCC5FD4BFC7FC457DD6
+:106DF00019F317F5F5317F51FF1EF317F5EF317FCA
+:106E0000515FC6FC457D7DCC5BD4BFC7BC45FD7BD7
+:106E1000CC53D497313F515FFFEAD84B867225FBA4
+:106E2000ADA1FE18E71B86F238CF7B86FADFF61E8F
+:106E300037BCBF46FBD4F05ED2FFDA923386E71848
+:106E4000FB080FC77D0CFF9BE8FB8BA11D2B0B5094
+:106E50009CD4CE161374A2BF17602ADB4AD005CB90
+:106E60001CE18901C1677A21BF6E0AAF41E63A3859
+:106E7000F26C1F94FFAF8DBA8EFB25447C6132FE0D
+:106E8000A7064C9CF6752FDCE7CAF8697A4C65D1E9
+:106E9000A1C0873185A02796C6A2D9C087B1148228
+:106EA00059B16C7A9E1DCB249813EB49CF736305BF
+:106EB00004F3627D09E6C78A087A63030916C42EC3
+:106EC00025D8233694BEEB192B25D82B76253DEFFC
+:106ED0001D1B49B04F6C0C3D2F8C5512D462D7123C
+:106EE0002C8A5D43B038761DD5EB1B9B42B05F6C9E
+:106EF0001A3DEF1F9B4AF092583DC101B15A8225BD
+:106F0000B1F9042F8DCD257859EC56FA6E606C09D5
+:106F1000C141B1DBE9F9E0D8F7080E893511BC3C75
+:106F2000B692A02F7637D52B8DAD235816BB9F9EDA
+:106F30000F8DDD477058EC517A5E1EFB31C1E1B117
+:106F400027098E886D265811FB4F822363CF10BC12
+:106F500022F673FAEECAD83682A362BFA2E757C5FB
+:106F6000FE17C16FC5F6D0F3AB63BB09FA63BFA5CB
+:106F7000E795B1FD0447C7DEA0E76362AF131C1BB2
+:106F80007B8F9E8F8BBD43707CEC38C16FC78E1298
+:106F9000AC8A7D4AF09AD8C704FF2D7686BEBB36F0
+:106FA000F639C109B1BFD0F389B13F13ECDCFF8FD3
+:106FB0004AFABB029673B87F766575EBBEB2FBD218
+:106FC000D2492E4EBA83CBC587D34EED253939D25F
+:106FD000A13948F86D34C4BBE8472460DFB77BE4CF
+:106FE00047BDD0DE595379FCFD5B519F2D7130A117
+:106FF000CF4C72F76B97F07732CC479C2EF8FAB5EE
+:107000008A3DB96847AD296B5B807E930D456D3530
+:1070100008F37A73BFAC5BC09CDE3C5FE12F03B822
+:10702000FEAD59D29FFFBE404EF7E6775D2FFE9D25
+:10703000ACFF751F0FD717AE8E3E745EAF9BED741D
+:10704000B7DE85F2B062BD8297F5CE3DDFF9C16E45
+:10705000B733B477827CAE6FD0CEA8EEB4F3A1A0E4
+:10706000FB63BD037E1C3FB3FA87E0FBD1AB0A5440
+:10707000FC5D95DAF58A07F9A5BEB9743CD2B58CEA
+:10708000F9C92F393D493ED96C41D7BAC53686FE7C
+:10709000C93A8D917FB86E3BCF43467FEA44E09773
+:1070A00006C12F0BD77D4E7EA786C57378DE53842D
+:1070B000FBA7E4EFD8CC6FD9FC0ABAF5BE64072869
+:1070C0003F7EFED346FF55A3F04F2DDC6A7ABEF813
+:1070D000DB09FD9E66BFD48CDEC22FE5E3794F4C01
+:1070E000ED45F3FE12E68DF924C1DBDC4ED41B80A6
+:1070F0000F8AC3483C48BFA7C407EB7AEE82F25719
+:107100004FEFEB4F7972A7352D1FEB05D3F9EF59F0
+:1071100029D6E0087C0E78A47C968E9569940F752C
+:1071200014F4808689579EE008BC3FAEEDDDDE4C4E
+:10713000DC5F698C4738D7539E782D8C01F3526AF7
+:107140009FCAA6739BD0DE901DE8D77CCA46F9483B
+:1071500061B6D4CB2ABAC62B02AB6DC417753B32CD
+:10716000797E5AD87F08CF1548BA1C6DEE3B1EF3C6
+:107170009AEAD6169592BB6E878DEC43199795F4D3
+:10718000EA9ABFCDF3051A59640DA62E01BD4E240F
+:10719000A457CB6EA22BD0ED4412BA9D381FDD1E32
+:1071A00032D10DFDD437E1CB3BB2693DD7AC8AF685
+:1071B0005FACE34FB3FF9FCDBC82EE3D91F9CF555D
+:1071C0003DE4EF8CF9F290BE67D69713DDCCF4AABC
+:1071D000FA5B3DD185BDEBA67B87A7F76533BE0380
+:1071E000CF6708BFE7F4A66BC8FEFEAFDE7C5FF09A
+:1071F000DA0ACCFD64ECF5154EE607E3FB8D151EAF
+:107200002ABFB9C24BE5B7576804DF595142F08431
+:107210009DE715C9F5058C40F97D2FF4E671A91796
+:107220007ACBB8F0322FFAB9ABFEF64639E619E55B
+:1072300086DF9B34EE2AB2DB0DF922D5D71BF34152
+:10724000DA6C22DF6C9DE2C3FB64EA02571AEAB3F0
+:1072500092A1F132EA1F91BF52B73693EEB19B3A39
+:1072600021DB50FFC6B53D0DE5577B6B34BE29557C
+:107270007D0DCF6FAE196828D78ADF8F605A05ADB4
+:107280001B19FF02CDCDE9E2E175BF583C227F39E1
+:10729000F4FFC5011BBD37D3E3843D4CFBF9F0136C
+:1072A0000E1FC6F74EE2F937289F7C53A5FCA29328
+:1072B0003616F680883FA9B06684CCCAD7D59787A2
+:1072C000F9BAAAFA9BCA701FCF7EEAA0F860FD4601
+:1072D0008585F16E860EC03CF4BBEC1907CD7BE6CC
+:1072E000469505E97C95B615E3E4CB9E1AE0C3F814
+:1072F000E8F4BED1DE78DEB0E385141F9EFBAA6FF2
+:10730000E3DF9F84FD7926E6472965148FF8E3C4FF
+:1073100096D916CCB7530FE4E27AFDE3F3FC77CDB0
+:10732000E62E7973B807F03CEF95AD6F55403F27D7
+:107330005A54EAF7D3A71D9B555AF7FE7CBCDF369B
+:107340003EEF08F929C6F708FC09E5FB27B32343FC
+:1073500048FEDCC1FDE35DF103F3457A23BFEAE4B7
+:10736000595CBFF1F81B08A1029413F5361FC565DF
+:107370004FACB751BC10F401E51B9C68C9B670391D
+:10738000F43CF15D9D55B3EBFBAD5BAFFAF9EF63F8
+:1073900068761C2FBB4F0DB21158E6F911E1B54AC2
+:1073A00090C77F8CF4BD75C9083A176DCEE392F093
+:1073B00014ACA9A02EAE34EF451EFF65C3DAACFABB
+:1073C0003C77E99F61C10AC37D460B8A1FBE6714E3
+:1073D000C0D37E7EF5E2975BDC24273FB3BC347CD0
+:1073E00039C04F2786FF6005BABCAE068BFB60DE56
+:1073F0009065FD2685E22AC7EFC1B8FF27CFD97C6B
+:10740000B40C45DED8BC9FCEA5F854727B81797947
+:10741000FC3A9AA778F1766246F922D3D856E15F12
+:1074200088F03C031C04E0C7B380C7C58E97BBEF50
+:10743000C2F3C3F5A6F3C6C7C5398BF23E8A415FD6
+:107440002F13E57A0B5F9F6C17BF8752FE5E9C94EB
+:10745000E352DE4A793DAE4F317D27E52C635B492F
+:10746000BECC16F7252F78DAC1CF1769CC83789C6C
+:10747000CBC9C456F5D1E8BB79F6E71E42B69EC328
+:107480005A49EF7D628BCC6E2DC2EF373767D1F74B
+:10749000365F04D77144FE1E9D95E4C81CC6C7B96B
+:1074A000B045894475FE0EF9FB240CF5844EEE744C
+:1074B000D10B267D304BE8BF59CC946FD462D453A6
+:1074C000813437CD6B5E8BC8C3EE1C97CACE61BCCE
+:1074D0002B187965128D5BF145128C630EEB88E2F7
+:1074E000BDC80B9FE5E798CCE332CFA3BBE39CED8F
+:1074F0009B3216EF57EEECD7346E896F8607AB746C
+:107500007490789F1DE6F89CBD53217AFD5ED85B90
+:10751000F27CA099FE73586012CAB9390FC03EB30D
+:1075200028CE0F920FE66E8BD079C04F594BBA0B15
+:10753000D6C3828DDB6E1C09DFCF79EC753BF27B05
+:107540004D56B4BF25137FAA67F4BD55BD13E87D22
+:10755000939EFF47E18909BF157D077899B545A539
+:107560003C0A5D3D914710267C3584F9EF09361CB5
+:10757000527D4DF0B4017FE6A8ECE2C72BF1F6CFC7
+:107580001EB7D9AED9D6E7FC768D59DE74B16B4CF7
+:10759000FA14CF73A0FEECC8E5F9E95F58FD19595C
+:1075A00024A74D7238B78CEE63957278B6D083B24B
+:1075B0009F59A8FFA0FC878D3F4F477FC6EF1FF85C
+:1075C000791EE56BA0BE1914D737B7D5F3FE6EFB55
+:1075D000450AE54BFD7162EB10B4076B1EFF75BAEF
+:1075E000FEBED79305C1D7FAE078857E5CA86EEE23
+:1075F00083BF6B28E5EC05F76DC9E6E9BEC03CDD4D
+:10760000C679D6E13C75E754EAC53C8FADE5F33B5E
+:10761000BE9ECF776697798629AE72DB930E5F9810
+:10762000EC8E28E9F593DB5486FBAC4EBBC36407B4
+:107630007CC95A36213E162E7DFB032BF0C5DC4B50
+:10764000003FC00735F73948EFCF7D81C7533F5121
+:107650002AF329A0BF379AFE3D783E0FEC05B437D8
+:10766000E2E3E8B403CE221E3BED806EE26F91F0C0
+:107670006B2DDAF96BFA1D2DC5CFF33117C97B6D70
+:107680007698EEB5D15006F073FE4EA4532FF37DDD
+:107690005CDC3FFBA7FE9FDFB294F8BFE312FD392D
+:1076A000B6C6D4A80DF3903BB62964272D5C569935
+:1076B0005EC9F07C1BF7ABE51472BB56F1FB29BF2A
+:1076C000C601744D85FEF20B35FE5CF3F07CF3C70A
+:1076D00018DDA323C76B7E8EFE7627EA439785F4D9
+:1076E000A179FEE30BB9DE5CA85AC8BE5E60E776FE
+:1076F00076BBB8BFA29F1847BF426E6F5F56C8FDEA
+:107700000AED685762BCFB2A07FD8E116363C9EF5F
+:107710006E659CFFAC126F1EEBA9CEF54DF673475C
+:107720002FC4D32DAC957E177152C5140DCF337C69
+:1077300090E7A47BA2E02F80ED4C13ED1CB4F1F395
+:107740000B1F601F30AF69C23FFD015E8F0AFD7FD6
+:10775000506027BB36FCA283EC863B53B9FF90E513
+:107760006458713DDC2CE4D4F4510E3FCAF569A392
+:10777000EE0C2084F6C20CF055E3EC585D0AFDAC2B
+:10778000B4707DBF328B71BF40735B39E2EF7230F2
+:1077900093317F1F66BFFD5CF6F9F8C8787E620101
+:1077A000FA19AE609CC12A08BF86F2023B7F5F5384
+:1077B000F893C90FF462EC779835857A0671847C6A
+:1077C000519B41FBDFC978BE200BA195F8ED3B56DC
+:1077D00016B670B8D645F72A790DBF0B7B43058BDB
+:1077E00066C0FCA2FB8DE73B6E8A5AA203305E6442
+:1077F0008DEE46FC599C9ACD03FD04AA9432C4FB3D
+:107800008255DD1B6F63E1361AEF02BCCF0BC7F95F
+:107810003D85F285A6C1A2473EBDC5CAF6AA659CB4
+:107820007EC8878D595A98EA2DE17C2ECF9548BAAB
+:107830009442F37AFC4E13E38376D6A6E3F7F6C4BC
+:107840007E95DB0BE5BE8FDB6BF3C5BA9D2FF9EEA2
+:1078500059E37A7D1CD70DF02DDAB248F76902267C
+:10786000E3FB4744FB8F08BE5F5328E37FDDEB6FEC
+:10787000A1834569DE2F3A888EB2DFC9026E2CE4FF
+:10788000F9D3721C927F67B3C594CF335BF8692C30
+:107890002049283FB8E549EE1732E51D81A144F99A
+:1078A0006DF3B6989FEBFC3CAA412E91DF54B17763
+:1078B000CCC4F129DF4AF121BF4FB36F25FF80B956
+:1078C0009E0D7F3F15E36E6BC1AE5244BC0CCA8E59
+:1078D000F50AFDEEC5B45E1D83519F83B41E4FE7CC
+:1078E0004285BD3D5BD0D721EEB79A8DF615C6D542
+:1078F000D0BE427C6DE476A555D8C375EB8DF6C637
+:10790000B4669DDDC981E17E0087294FDD26EC8EBE
+:107910000FED1D8351EE9BEF0BF8D0C2E711CE6344
+:10792000FC5ECD1CFEDE2AEC4BC9573F2DB419E29C
+:107930006DF2DC690DCA2B7E6F83294FCB45F7C7EB
+:10794000D428FCFE4EE9877C5FC0D36087D27D39A6
+:1079500047D2280E6EF64FB657BAC3169D9F727A5D
+:10796000C66D93103F35E9762BC2F73BEF156BA33D
+:10797000FE8F788AC9FE5953397423E6271D2BFCE4
+:107980007CB2B3374553C479A83FBD86F9F4D77F9D
+:107990000DF3A1F2D9C97ED847B5BFDC718B134472
+:1079A00077ECDFCF4EB6829E6F7FB0631396532382
+:1079B0002C6005FDD8BEA1A30FDEB99CAAD902F4A4
+:1079C0007EA56CCF16C0F6DA7FCCCB1F15DA027815
+:1079D0009F6E8D38B754738542F2D721D697F43312
+:1079E000D5585EE27034FF5D940BD5CBD6028EC2C3
+:1079F00072BC0FF504FDFE429F62BFA310EAA5F51D
+:107A0000099E46386F8A12B6E379FF43914B845E34
+:107A10004BF83B218E42EE6FCD2B0AD0F7D28F0E62
+:107A2000EDFCE59BB4B3458CEB7F0053DFF7AB0077
+:107A3000800000001F8B080000000000000BE57DA7
+:107A400009785445B670DDBEBD656FB260622076C0
+:107A50001212020668208100419B84252C810E2889
+:107A60004689DA2C02622091D131333A7F77D844AB
+:107A70007434A84F19079D169161E6A92FA32C41D4
+:107A8000B60EA0823ADA282A3AC04445058D4E4403
+:107A90007813FF87FA9F73AA2ADD75495866E6BDF9
+:107AA000EF7DDF1F3EBECAB955B7EEA9B39F537530
+:107AB0006FAA6ECF49F0E6331693E1353B53185B5E
+:107AC00050A1F9AD0318638702B99E38C62633E684
+:107AD0006E8C65EC27FCB93ADCDAAE303106E36F28
+:107AE000CFF4D8AE2864AC2A3C4FDC3F32CF21C360
+:107AF0003C376970EF30F8CF5C4EBCFF866C771F67
+:107B000027F4DFF67F9817E761A34798D810C67E61
+:107B10006667F4F35DEDD65C7B01B4CFD99258264D
+:107B20008C7B615BC65C9887D5C1E4698C7DD5FC94
+:107B3000A1D509F32C6AD7993B89B19A768DDA459C
+:107B40009B9AAD63615C0DB4A511F8550B7C196B64
+:107B5000314F8D0B5FEFEF047C0BF1FA6AC2FBB67D
+:107B6000174E9ABD30EE3653E3E74F24C3E5E19A52
+:107B7000EB59E7B9EBECEEE4EB3CC6585963FEB9C0
+:107B8000FD054E8DFA7F9DE31E8CF44B8139F03953
+:107B9000BA89AFD738FE57028FAA6876B307FA675B
+:107BA0000F89B33B81DE8587BC4BE3008FB96B3314
+:107BB00007E93047FF8C929148373667B842AFB239
+:107BC000CB190BE1FACC6DDD19B4DFED284C6080E8
+:107BD000575562E80E3610C8E6CC69B08F646CE287
+:107BE000E330E672BAC5CDE0DE329B848B3DA38BD9
+:107BF00001FE51277846A0B0C10FF3EC477C609E90
+:107C00001B87F68B66FD817A993126470263237BB9
+:107C1000CEACC375DD3874E458BC3ECA16973B93AE
+:107C2000E8CB483E46F6F44C433C713C837578AD56
+:107C3000C194EB601DDED775971FD6E1ED1FE30DF4
+:107C40007442B70A41D73AA783E8B1DF04780E0A35
+:107C5000E3219FCF98E38E10CC777C49DAC0553072
+:107C6000DFDA9EA3EE427CE4F3D7F6F4CE897C3EC5
+:107C70002CB73F5EBF583C660A3CEE42BE41EB2942
+:107C8000063913B4FE09FE4F1D1DA3C0D74C4A622E
+:107C9000EEBC303CFD9A7405AEACCA56C6DF30E788
+:107CA0004AA5BFDC162AA88D0DCBB7111FD932E625
+:107CB000277C6AE236C63340F1E88E33EFCF003DD1
+:107CC000F9DB7ADDA501AEB7EE7CF6FD1130EA14E2
+:107CD0002C3809E876CA0D00ACF7D4263DE0CF4435
+:107CE000F9709BCBBB33361FA782F10B0FBC641D11
+:107CF00005BFCEAF9D3709F9786BC0F2494B049EA2
+:107D000067D8592BCB027DD8A85EAF610F7CABF74B
+:107D1000472868F5F483791A0DFDB5E3BE60F138A4
+:107D2000CEFC498B5C273CBFEE48E683FB22D6BDE8
+:107D3000C61997FCF995F0CB2036E8271D9FD7FA96
+:107D40002AAC90953635139F961ED05D28A24B7BAA
+:107D50006A4C83758EDB640B44816A7DBDED63AB39
+:107D600013E8F5779FF3C17D16D4FF7AC692F0BE73
+:107D70008FAD2D70BDC8E9243A2DDAF1AD9501DF44
+:107D8000C7EDB89DF47A2CD8B104909F5033EBB76F
+:107D900009E6F767C6B99E85F96F5B399EB1C18C5C
+:107DA00025B4CFA0B6BA613CCDB7B07D1AC18BDA8D
+:107DB0006308DE1F1D1ACB008FFD5BBAB1A580C71B
+:107DC000DB7A30F7B7388F2D8EEC4479FA8D4B7013
+:107DD000DDFBA3FDF93F83E795FFC7B832A4EBA213
+:107DE0004D9A1BE5AC5C67FBB544C4378AE62BD7DC
+:107DF000DF29B81DAE4F2C8DF39B12A89F31E8D719
+:107E000087C4AD6200EB56B0179DC8E73E615F2C9A
+:107E10002D1CEF31ED15349FEC7FDD9945FD12B639
+:107E2000A4AC37CF8A0DAFC7D2A2513BA1FD4A6A9D
+:107E30006B3655989DF09CD7F39E49463AC1F85849
+:107E40006FA776796802EBC47E75D87F618F67A0D3
+:107E50003D86799BB3DC2DA88793EF6931DBD19EFA
+:107E6000C6DA1DCF821C4C2E1AE89C1BB12E7DCF8A
+:107E7000F5CC0972644B6EB3B861FE19D046DAEFE7
+:107E80009BBBF0379F0B3D65AC9EEC85F44BACC7BC
+:107E90003D0CF1BEC9C1F1967AF5AE182FEF0F690E
+:107EA0005C3FFC9B6D8167E1F78FB2BCED68474298
+:107EB000A358E58B644F43191571FF3AFC81BF76D7
+:107EC000E47FBCB98525C2FD3F74E0CFF5FA42F8E6
+:107ED0007F25FCC4DB3AAB43B978FBEAAB436EC009
+:107EE000ABF9EEC183D13FC8E7C5675AF9BC8EB67E
+:107EF000B328AF35BB629CAB607DE5C01B84DB76ED
+:107F0000DA02EB32E93AD392B1B5ADD3A0BF26BEC7
+:107F10002D17FD4FE9EEA820CA6DF3EE2833FA9134
+:107F20003D39DEF8CC14BCDE7BB406F2EDDE613305
+:107F3000A31C2439DD0978BD2B7C2F64C7A43E1A0D
+:107F4000E5CCBB92EB9F57E8E14C21B7B3841ECE42
+:107F500034BB12EE02BC6F7E536768C767DDA3F5C2
+:107F6000DB5480362DCE9513A18752DF2C289783C2
+:107F7000513EB95C56B77713FA9D29E6E57A500E63
+:107F80000E1AE9537E65B700EAF7A2F6241A27F520
+:107F900055EA696AB6F7AA4CE043F952D06F788E79
+:107FA00077495A01EA4B584EAC0E94279093D4B9B6
+:107FB0001172B0B4F97B33CA89A5582339B1415B3A
+:107FC0001A21479E8E38C531B63BE0317959A669F2
+:107FD000150BF79766CA78E5E2E4DD95C9E56B56BF
+:107FE0006C30C704F3596AA35C4B00AF53C94EB25F
+:107FF000638BEF030048B0D8E229C53863F16F34D2
+:1080000017DA5F8C3FD0FE0C395C6BF546E0777D6C
+:108010007B7FE6043A4D6BEF456DFF0C6F05F27FF9
+:1080200066FB7441C7FED432679189819FB9C3CE84
+:10803000FDCCE9DA7B6FC2E79D0ED85CF83CB0D08E
+:108040009CDF02DF42B7EBB2BB10BF372DEC6918E3
+:108050007F22CAABA35E9EE8C91C8F008AB3D700FB
+:108060009F61DE1316E677003FE700EC45B81B730F
+:10807000771B847A07EB8CF02B67CC0D192C1BF83F
+:10808000BBF88363663085B7E686FA07E1B955A386
+:10809000B8FF6F5D6F21FF5FDDFCCE1013F47F9999
+:1080A000E9BE8C81ED1D7BB9F7365CCF82A98117C3
+:1080B0002C00DFF6EB97E28739C3F46C340773CCFE
+:1080C000707F23D0D10F78353EA0970578DC13530D
+:1080D000D1EFC272BDA03D9BE823FD8DB4DF5B7D77
+:1080E000A9B088B01DBF901F92F2BD50E8C142D424
+:1080F0000316E96F2A3CA3500EF334570E8BF43766
+:108100005C1FA49D067927BD29CFEEE95ACAC27625
+:10811000DBE88FF6EA8D8F0C87F5FAB2BC4FA2DC54
+:1081200097FCFB7FBDF4117455BFF887D1C8A751E8
+:10813000576A4CD72EC64E7E6F213B794F05233BA5
+:10814000096DA49DB47411A7AFBB44B96F10720F31
+:10815000F12DC58D68C723E7FB28AB6413F2795B6B
+:10816000A6C6E7FB17E16DB4EFDB3AF0BE38FBFEC5
+:10817000FBCC8BB3EF6FA27D2F3CD79E33980FEDD6
+:10818000F9DF76F609A0BD3FC6C0FEA37FDB11E391
+:108190007C56D87BF207D10981F3D9FB5FE7CC7E0F
+:1081A000B30B7BFF67E4FF3F6BEFA57C19F5C1A81C
+:1081B0000746B99F783FC45FC8A7AD1A43FB1A8E24
+:1081C000B718C9F1FE2C2EC7526F22E22FF2F3A08E
+:1081D0000F819CCC73F5F2BBDA0F0A9C986F16C422
+:1081E0000D645A58DEA5BE487937FA913959DE1F19
+:1081F000C90F083DA97ED1E807BA92A76D16CC5FDA
+:108200002DD5DF723F006DA41FE82ADED1B32E2DDD
+:10821000DEF9F622E5A97B168F17FE1BE5A97B5632
+:1082200061A7F27459D63F113F9C878FE467A49CE5
+:108230004D7C83CB07CBE6F13EC80BE1BDDFDA33E3
+:10824000B03413ED1EB787137F62B548CF9B453D11
+:1082500041CAEBA86CEF88AC083E637C8F71FBC50C
+:10826000C68533926B991BAEDF0C6DA4DDB021FF88
+:108270003A89EFDD599766EFFA0BB9B8109F2BB228
+:10828000FEE5716155677C656EEEFFC37CB14D43C1
+:10829000B9F92E6866A85F5DF1D5B286D35DC2CB11
+:1082A0008366E95F93D0BF82BCDC98F54FD89FF21C
+:1082B000D2C6D37608FDEECE1A5E611E06797A111B
+:1082C00013F58F11ABDD66B42FF0EB709A91EA23B2
+:1082D0006FEB122E3E381AF098F84847BF1FFBC7C5
+:1082E000142774D453309590E37F9935ECE00384E0
+:1082F0007703E7A3B7C5ECE9170117001C170117AF
+:1083000019E0B57C3CFA1107CD13E0F61EE6D7065E
+:10831000212CE7137AC0DAC676C3787193E6C07A67
+:10832000C80DC57FB3227FCA4B5B5E4D87F53E9873
+:10833000555A110B21C00D680701DFA7B226AEF612
+:108340009BC5FDDDA93E463FB646CDAD039FAA8B3A
+:10835000B44056E6B9747C2A4BF567F86356EF676C
+:10836000D6824BBB1FF948F767D1FD41DB253CFFA7
+:10837000BA62E60E7462279F9376F22CC0727EA0DA
+:10838000DDB4469E871BC76F12E34326D34206F433
+:10839000DA9175F36AAC978D615C3E7665DD54E1E8
+:1083A000CFE7E8BA0DEB3D1FBEEB3A59AF53BD3FE7
+:1083B000783E7A6D3CE77E211FF3557949307BF694
+:1083C0007D077824246B0E8C6B1779A21EC0F8BD34
+:1083D000BC54CAF7AD15EE62585F1453EA7F61F9D9
+:1083E0005E50311AD6B788C9FEEAD5E8973CA68E0A
+:1083F000F15CDE77681DF7E781FC50290EEE3F9CAB
+:1084000075DB6AA40FF083FA09369F47DE1B0D70F7
+:10841000B1413F847C937EA2DD06FAE4746237CEDC
+:1084200008BE7DADB14AB47BA1121EEF85B2789B28
+:1084300092CDEB243F083A5AB2791B8A8EA0438F23
+:10844000309FE127887944C4BA894ED7278B75FBC2
+:1084500057554CEA05F727B27E1AC849C2332B5646
+:108460002FEB19BEBFDB33AB484E3AE6F3AF3C8887
+:1084700074BC5ED029E599FB0E0A39D250EF1692F2
+:1084800040801C6CD2FC3AAC7321CA4127EBFCEB58
+:10849000B972E437DCEFB69CE7FECFCEBDDF6DB836
+:1084A0009F59922FE57EC1A749063E9619F838DA02
+:1084B00000574938A0D83369E76635AD5EDE3D190F
+:1084C000EB8D1ABA09B4D7566D20637DB31FAD8802
+:1084D0001D86F2EAB4A483CDEF9FFDD8413BC8725C
+:1084E00005DA3392DFC7C97E4F437D27784D857B00
+:1084F00000CA4FEDF254185F90FD9BD576D0AF1BAC
+:1085000096ADB6604C5394FDDBD56698F7FA82FFC2
+:108510007815E7336B4F1E9C94791E796D30AC63F0
+:10852000AD01F61BC63F7A01FBBECC70FF3D86FE57
+:10853000070CF01A03BC52BD7FE61C8DF46426F0D4
+:108540000F097721BD999CDD111776F8332D96E23E
+:108550002445EE272EE57065F6BF57AC8C8D809FC5
+:1085600079AE22528E2D8CFFCC48667EF41F962E5B
+:10857000ECD9D86CB5DED5B19E3CA3BFE3FD7FC579
+:108580005FD3689F45F1CB7B75156ED6A5BEBD7CCC
+:10859000F08E58BC28E16D1558BFE872DFC3BFB537
+:1085A00002F73D263E24FBB756B823D629C78FFDD8
+:1085B000E1271D9FB7E8992D15EBA1BFAA24988349
+:1085C000F5FAAA44DE829FD1D18FD5887AC7D89D8B
+:1085D000BA07FD4C55743067717EC43A59632EAEAC
+:1085E000B3F96E9DF8E35FCAF39159CC65C57A453E
+:1085F000734242DD0618BFF76EBD0EFDDAB1BAA4B4
+:10860000EE984FECCEE6F9DEDE842BBADF02707313
+:10861000CCCD56ACD736DF3B86DA3DBA7B451BC89E
+:10862000F103D9AF56C4F6C1FE04A2CFCA679A2B94
+:10863000EAC15EDD9FEDA4FBBD898EEE4D18AFAEA5
+:10864000B230AC5733E67A8AE4E6D7B681AB008F16
+:1086500099F557D2FED1AC7FAB189B06E3662DB7D8
+:10866000D0BE02FCF447BCBDABC658B17FCE32D100
+:10867000FAC751BBFBC797DEE80FE3DBEED35DEB38
+:1086800060F0AEF6ACF85980D7A751DC0E7FD2DA95
+:108690002B1EF1ECD5CBFB7836CA6B7C5CB486CE56
+:1086A000C3E18C9F0AF366E6B8D7E075397EF78F91
+:1086B0003AED836D6F9DD51DF9B74EC8CDAEF65915
+:1086C000DD6745F8FBB95F9B89CEBBADCE3B30BEC5
+:1086D000DC1DDD53C3BA0CD03909EBB673447C0DF5
+:1086E000F252F752277EFFA16C9DE872DC56C73E1E
+:1086F00005216EBE3FA518F194F7C9FD374B0FE772
+:10870000A0C838FA775794BC909D122967470E622B
+:108710007C4F7134C0DBB23F5CED07BFC2F642FC58
+:108720008F7824BBC7A25CB17B92F83E686A636E07
+:10873000643D221CA72E11F6808F3BEA8FA3BCF567
+:10874000E8735101CC678EFAFF1217597F977A327E
+:108750002F3ECE8FCEF88BB83833D2F598D9F7F9B3
+:108760002F70DFF0490BD9D1B94FA6DCD386F600C4
+:10877000F889F520E373937A59689EAEF707BF54E2
+:10878000F5C47FF2BC7AF26EF6C98AF5F95DEBC9E1
+:108790003C11B78F7DD2E241399F571867C67DBA29
+:1087A00092275F7916E571DEED51836C80F8BC2766
+:1087B0006DC4DF96B838BF03F711E3E3CCDDA03D0D
+:1087C00021EC574B7D14E5297A772BD93D7D45A1C6
+:1087D00013E953AA33B31DFC8A1EEF727A38BC0C1E
+:1087E000EB86CBE38A9CC85F472FAE0F1DFD099532
+:1087F00013B4FEE17DB393758F3C361457CD02D38D
+:108800008766FEF3FB6835CC9380F5C7FFAE7D34F9
+:10881000AD575CF2E7908A87F7D1F213AE43F1AB24
+:10882000D3096F7D495400E9A967703F318E69B45F
+:108830008FC61CB0FE7EE17D34FD9783893EC77DE7
+:108840002057BD812EF1761AAFFF520FD8E0B9A59F
+:1088500049BCDEAA3F56C1705F0DE8EA77003C2EA6
+:10886000B996F6D77E25ECCC4C8D791A49FF5D1967
+:108870009827CF7D328AF838EFA95BDFFF4D01F2F0
+:10888000AD3C39529F7A08F983F9983D313CCF17B6
+:10889000F5BFCA407C4A7F07F925E69DBAF7B1EBE0
+:1088A000C96EC6D07E1B73B4FC7A28CA4B7DCC40FF
+:1088B000AC93CF7B322D232B3F7CFFBC2577E7F297
+:1088C000FB216F8D47BB1545EBA9DE6423799979B0
+:1088D0009FEE263FD9D34A7EF29365510457F7287D
+:1088E000227D9B69E2FB6F1013A6927DE72467D57A
+:1088F000B1CCFD522CDAFB07423AE78F5FF0CD8A0C
+:10890000FC19DA2B899E7F33D218FCD77542DE66BC
+:108910009AB81CB15D1AED373156EB443B5065D225
+:10892000C8DE19F5B2AC178F5F6766B86EC2FB166A
+:108930003E68732DC9E438E8121FC89B169A42732B
+:10894000711F926DB1517DA306D61115CFCF3DBCDD
+:1089500008F8D79899D98AF52927B76B129F1A6713
+:10896000C5389457E83F6C86FE8571DC2E2FECC627
+:10897000EB3E2CCE1E7836F279887336BFCF198F36
+:10898000FA368CE405F5DF04FD7F63BCBF34BEC856
+:10899000D9924FFBF72BB15E82F8F4E91FF15C80AE
+:1089A000D3FAA33CDE6ECE8A433E244DAFC4E73DEE
+:1089B000AF937D02A57AB008E3C0E7F5C198CFCEAA
+:1089C000BC6FEFD83508FF69A0035198F9C2BBE42A
+:1089D000A76E1372D682F13FFA2D80FF046D6D2FC2
+:1089E0006E1FBC3AAFE7D4F6E2755E4957D9BFF0C7
+:1089F0003E0BF163E1722E0F0BEB3FA07917C6859A
+:108A0000BA233F166EB60C41B9FE85C07B567DCFAA
+:108A1000E2C3201FB32C090E0D2E55FBCBAD08571A
+:108A2000376804CBE72DBCEFBDEEA67C3E1FB63603
+:108A30002147E1795332D0AF7DF55C52C6CC08BEF8
+:108A40007FB56C6B3CEE6B7F1A15CC71603DE6F622
+:108A500028D73AD253CE8FAF96E5ACC37ACD1C4718
+:108A6000280EF7C3E7DC919D88FEEE982368C5FECB
+:108A7000638D992684DD0E4731C26EF30082BF12EA
+:108A8000E754E807F8B448E37253FDDC5E6B163C2C
+:108A9000EF29419FAF9F7F3717EB060B3342B9E8B1
+:108AA0008741AE72D3912F7FD4285E58F49CEE8E0E
+:108AB000EA1F96AB452857A0FF0B845C2DDAB4F56E
+:108AC0002ED4D345284F83CE954BC82FF7D1F51719
+:108AD0009F1ECBF8FDFB50EEA4DF07789905EB6BEA
+:108AE0005601C37310FE1DD23F85FA47F37E7F3EC9
+:108AF000F913D662C5B8B846E7F102703615E389B6
+:108B00009A268BBF25C23E2EC2FEFC707F57721381
+:108B1000EC25F6CBEA6DE4978242FF5AEEDB1C8F20
+:108B200072F1F5F37B5F1D8E79D68B9A03EDFE39DA
+:108B30007A28E85683748AA775527C548374890F07
+:108B4000D3A943DF845CD4304E0749971AB3A0936E
+:108B5000EC17F7370B39AC6682AE9B7A737D17FA48
+:108B60000D12437E44AECF9BA89E1F3825E4FE6DB8
+:108B7000B1CE6A901B573EC997DB3A44E4FFD0F56B
+:108B8000F59F9EA6FA91E4A7C43B3A873F1FECB439
+:108B9000BB5B6298CF2D2636BFB37AF56742AE2C09
+:108BA000B1DCAE7C5C9F7E531DD06FC173BA8B88E5
+:108BB00087B957C4736DA696388A4F7FA93B705DFD
+:108BC000A5FF5E3101D72DE5CEB2513337E13E210D
+:108BD000EB46F497F8955EE699D08DCB5D10F19158
+:108BE000787EAC05895FFE3F690E1EEFB658B18EE8
+:108BF00028F5D488EF2981AF1EAF0DD706203E2E71
+:108C000027EA37033F48F8C41EBE9B9EE73F7A77AA
+:108C100066FFF0738EF9E3CC38EE18E37640CAE5D0
+:108C2000C7A22EF1F1F2AD140FCBE7D873B85C45B3
+:108C30003CC75B977CEE733AE2BC1C8E97D48BFDED
+:108C4000895CFE4B977D40E3A49DC51FACC7497A64
+:108C50004ABA45E8A5421FA95F529F245FFF51BD54
+:108C600062F7A450DC7AAF5837E948F7B05F40F9B3
+:108C7000447F67B3F27370117E93E29A713DBEB583
+:108C80007A3BB92EE964BC1ECEAB1C1948FF71B10A
+:108C9000A9B45FCE96A5EEEB15119F7D8A752FB412
+:108CA000A77FD003644F196865843F97715BFDED22
+:108CB000E31CA350BE9ED3E8DC91F4DFF0F34087C1
+:108CC0009CC27CF30B6ECFC57862794E16F767C9EC
+:108CD000EE93787FF589D0D87867387F19793AA8EC
+:108CE00027607D7053A6923F54B7EE233D5FC84284
+:108CF0002B30DF9D79DFBBE54391FF7FB0D0F98555
+:108D0000390D99E4FF4EAE9F3D1853DB99CB7308A4
+:108D1000BEF5D95B387C1F8FEB662E2FDC80F5F912
+:108D20004FA3DC6351CEDB566B0ECCBF463C5B7869
+:108D3000CF0DD03F22EE8A6E88EFD1F59F960FC7F8
+:108D40003CA24E27BD71AF7F643AF6BB9B74172ED1
+:108D5000710E73DC7303CAB93981F44E9E6B5C6A81
+:108D6000E1F2E6CDE176A33287DB8D4A21BFA54B48
+:108D700097E6E2B982B6A7C14FE1FEBAD5D918C4C9
+:108D80003C70E765AE75F09C1A485B53419E4E6897
+:108D90003C1E9F6F657694AF0396D09D88FF813B04
+:108DA000E306D62302FAD921A81F6E9177411E450A
+:108DB000CF95F492CFBF59E8819C47DEB71FE32AD5
+:108DC000F42302DF93CBFE301DE385931B7312590E
+:108DD00004DD4FE2BA80DEB7827D7CB1937CB03A8D
+:108DE00047D6B902FC39A28E78C0D2D003F77321DE
+:108DF000AE3F1E199F7FF174941DE512E27AF5BA19
+:108E000085FB1588E795EBA03F0ADC91EFE9550952
+:108E1000DE4EEC916C8DF1BE2F27B6D3785FEA9FC2
+:108E2000F17E19DF77D45D7A5DDAB9AE561F300670
+:108E3000146228066780EFE8981F5EC2F397731BE1
+:108E40006C0E1BD0F738EA17EE0B6ED679BC68E7CC
+:108E5000FA767CE7C000D615E61E61AE20C0730F1F
+:108E6000E92E278CDFB7FA5E3ADF71CB5A8D5DA60B
+:108E700045E45D8FAE9E8EEA76CAE55D9106E34FCE
+:108E80006DE4E751A03BD6906FBD9AE6EC3ADFFA6D
+:108E900057E559B2FE64A4FF7FE4887CCBC55C2A09
+:108EA000FD79DEBE1BC4A868D0B9F46FF57929AF8F
+:108EB000FAC6379FDA618D4F97A6C33AFEA67DFCAE
+:108EC000E008D4A3B804AA9FB4FA6A6973F09BA619
+:108ED000C16727039DB6C72638D07E7CE3ABA3EBE2
+:108EE0001D7223E474E4A6663D9DD1F81D2360FC49
+:108EF000AED804DCEEE8641F8EF3D978FEE667B7DF
+:108F00000FBD0CAFCBF57EF90BCE6F89FF971B67BA
+:108F1000C763BCDAFCDBA41DC390CF31090E1485F6
+:108F200079E21CCEE76BB83D3A614FD88075D41317
+:108F30006BA775C7FCF0164B9BD505F3BA7656C4E4
+:108F4000637DE433734BBC035B181F443CCC011DB1
+:108F5000EDE0F03246FB83C38366E6CCA4AD7B92A2
+:108F60009F61ADE600E6CD5FE1BE21FAF1B3D17CB1
+:108F7000FF5EEC07DEB28DD7D93AEA2AA2BE3042B4
+:108F8000AC37363751EE03D1F5D2227EFD8BB52FAB
+:108F90004DC6F94EAEB73810DF6FD65B68FE059050
+:108FA000DF9B401E4F6CE4E70516EC803C3913ED67
+:108FB0008846F2BB00E4D78EF277BBC56D4D3857BB
+:108FC0002E4B37F2FC7A41A346F9B694CF05EEC09A
+:108FD00058A2BB90533BFCFB095C4737D6B802E96B
+:108FE000D195BCFEA3F5003DB7F37A80511E24DD78
+:108FF000A45C84E594917C4AFE27360E1C954E377E
+:10900000F8899EFE129687F1C2522BCBC3F3507E95
+:1090100053B40BF5FEEF51F1FDB10E5567E7ED5D71
+:10902000D1F1EBB0FD7B544600F1FEBBC9F10AE67D
+:1090300059BFCCCD24B9BD4B775A34F8755A72CB91
+:10904000687203A526B709FDE0521BD911A31D7252
+:10905000E672FFB32D97D1FDC5B9FC9CB885D552FA
+:109060007C215B88077A62FC52119378068F92F715
+:10907000CB4D996606B9AE1891786736449E85B98E
+:10908000E9D370FFB76270E2E62C80876E48E3FD9B
+:1090900003120B2D00D76B3DA68D86FE6B72DD573C
+:1090A000E6463C47CE0BD7FBE3F59234EFC0DC1429
+:1090B000F473B12BD10FFC4D6B5B64D2C3E30F6A29
+:1090C000ECD8762D0CB7585806C6DBC5887F4AD732
+:1090D000EDD25CF770FE5CF5FA2C0839B02E31CB7E
+:1090E000FFDA618DEC19F3D8819F5384FCCDB2C7B0
+:1090F00006C9CEADB4B476C84716DAA90433F27DFA
+:10910000B260FB1473B019EFEFC396393EB753A8A2
+:10911000B8F6A7A4AEED3F282AFB5CCE07EBFB9B7D
+:1091200005D60B7CD5DCC06B50310D885C05F64E46
+:10913000DBF1DAF738EF523F6B89223E5439F07C8D
+:10914000B7C6BCA69FA05D18037231005B900718DC
+:10915000B778F3D7FB502D6E957196B788E2C53B73
+:109160001C7C3DCC3B9CE4F54E21AF5FF82075079D
+:10917000F99C120AC5E351D8D6C9C15CB40F65BACF
+:109180007736F2E18BB54B7B2C06F9F9FA459B6BF0
+:10919000128C3F1178291EFD6AB588F7D9593D78A0
+:1091A00035F4EFCFECB36E55847C55E772BFDF9A90
+:1091B00019CCB81BED4C26CF57D9D9BD1977C3F8B8
+:1091C000B2ACF185AB880AEE45B911FB9393CD9D06
+:1091D0009FDFA8E8C1E323B69EFB639B99F9E312E6
+:1091E000A965F140A7F1804B119E4B0558A7FDFCE6
+:1091F000003D1FC7C5635CE39C9DCAF77B9807EDE4
+:1092000096E4AFE4DB39FC049431AE37D99905D745
+:10921000DB87AD75A0FE4BBE7E21F4F10B3BD7C3BF
+:10922000317A2CD9A9C59B795D6FB1C6EDEDE29D70
+:109230001AAF6F9EE36F37AF409B3C7FED6CB26718
+:10924000D28E39E11FCAD702872721E8FC07FCEE3E
+:10925000DAD28BB2674FE68AF70406B281287F170D
+:109260008A97A41D03F6ACBF247E21C960DDF304F8
+:109270008E63F42AA719E9926277A13D5FFC6436F8
+:10928000F94976620D8B1CC7D62691FCAEC8D489ED
+:10929000AFE54DE9CC09976E6DD2E89CECA4A6240D
+:1092A00082E3DBD3082EFFFD6525B8EE8E7DD0DF8F
+:1092B000F726F8E486370ABCBC4E63C7F93D4CE29A
+:1092C00091DF88FEE7542CE00174F6C4AEA4BAA383
+:1092D0008775E443DA4F1AC22035A8776E8B9FF367
+:1092E000C75E4FFA2FD6B558E8D5E203DC5F2F1ED4
+:1092F000C5F70BCDFE3E09C87FCB7E9D0500BEF6AF
+:10930000805E1884A14B853DB7A59A9833826F5132
+:10931000CE68E68CE00FF3BB43986F550A79B937F6
+:109320008ADBFD98BC44655C65EC5C929F50C6D8B6
+:10933000FDB8DE38D7E5CABCCCCBE3632957D345AB
+:10934000DD7C326B5B867EF2DA4AE88F98CF52FC86
+:109350002DF90D4BB11A57035D8E9F4F9EBE90FEA7
+:10936000B10FEB43F264A00FE807F9FB5387F8FB5A
+:109370002710953C5E0CF0F4FD161680FEE5822E5B
+:1093800018B762FE73CA1D477A23E52E847E0FEC60
+:109390005C42914AB76E6E956E49652A7D523C2AB1
+:1093A0003D2EABCC52FAD3BC7D95FEF4F98314B8B4
+:1093B00067ED7065FC1575250A9CE99FA08CCF5E52
+:1093C000395581731A6E50C6F75E334BE9EF135867
+:1093D000A0F45FB971B102F76BFCA5327E40D312E5
+:1093E000A57F607095D23F78FFC30A5C187A421956
+:1093F0003FF4F03AA57F58CB1F95FE11275E54E04D
+:10940000916D2F2BE3AF6EDFA3C0A3D81BCAF85218
+:10941000FBBB0A3CC6F11765FCB8D44F95FEF1CEF4
+:10942000AF94FE8979DF29F07211E794BBFE4BB946
+:109430002FC496E5A01C3B7B788B7A53DDE784191B
+:10944000F5EFF08D1A4BC2FC67FF3407E9FD25E606
+:1094500081EEDEAA1C9F61B137E179F60BD9C50C0C
+:10946000114F8CD127D17B55A71A79BDC3E8D76599
+:109470003C97006ED91CF1DC6E6E3B24F46138A978
+:10948000CCA1C0299E5465FC65954EA53FCD9BA7F8
+:10949000F4A7CF772970CFDA2265FC15756E05CE5B
+:1094A000F49729E3B3577A1438A7A15219DF7B8DBB
+:1094B00057E9EF1398AFF45FB9B15681FB35D62960
+:1094C000E30734F995FE81C1954AFFE0FD0D0A5C82
+:1094D000185AA38C1F7A38A0F40F6BD9A8F48F38D0
+:1094E000D1A8C023DB9A94F157B7071578143BA095
+:1094F0008C2FB51F54E0318E0F95F1E3523F56FA91
+:10950000C73B4F2AFDD55FB982B42FB59DBFEF2A67
+:10951000E3B98979DF2AE32CC910EF63FD9B45BBD2
+:10952000F0BC7F5771BE8C03CB5DDF2BCFFDBB89B9
+:10953000C7E7BFEFCDDF4FBB4BE771E252BF87CE2E
+:10954000E725E28157D09304BF46F287295615D507
+:10955000239369DF825CA613CFBB411C0440A22980
+:109560003313F39098701CDBE3A7C1171FC76E86F7
+:109570001C07F138DEDBFBC7DE8598B7FD692CE6FA
+:1095800039B732FF0AC403FC6E02EE63BD15A5D6DF
+:10959000A3643BDE0E748C78DE81A8861E83CEA386
+:1095A000BFE3EDAD34BE635E51AFD2607D8B23E689
+:1095B0007F10F22F33E869830FF40C12ED877D0ED4
+:1095C000821FF5A512FC98CF49ED1A5F1EB54FF822
+:1095D0005CD4BFD65744F0533E37C1015F19B5EB99
+:1095E0007C1EBABEDE5749F0069F97DA8DBEF9D4CD
+:1095F000FED1574BFDCFF9EA087EC1E7A7B6D1B738
+:1096000092AEBFE86B2078936F0DC15B7C016A9BC3
+:109610007C1BA97DD9D748FD3B7C4D04EFF20509A1
+:109620000EFAF613BCC71722789FEF30C1AFFA5A73
+:10963000A8DDEF3B41EDEBBE36EA7FD3D74E70ABF2
+:10964000D84FF8A4B7A6BCAF2761C646933CC8F86C
+:109650007732E63D281C45966F94BCC7907F18F979
+:10966000F1A5788EA504C25F8C7F2ECF5DB7342222
+:109670002FF8463CEFDE68E68F027DA837F1BA404E
+:109680007D22A3F7C39888CFE709B964C93C2E9F10
+:109690002BF09A27F4A010E5338FE4F3CD4BC9B338
+:1096A00064BE1D93E1FD91E4B3A7C94F758758FED1
+:1096B0001E7EFF0CAF9607FDA76A6F79959EE77037
+:1096C000E5E243CA6DC194EBB09E7440A73A6C5773
+:1096D000CFAB11EF4974D9BFEB640FF447653FEA94
+:1096E00054AF7FCB125789F596A43C5E874DCA33A1
+:1096F00029EDD60C4F621EEEDBE7D46EF899167E8C
+:10970000FF7F0AA6E6A0E715CC69A173B8CCFD0AD5
+:10971000BE7A732D047C085FC7FCD48EECE94DC77C
+:10972000F55C0F0906C2DEE1B68CCED663C42747CE
+:10973000E09323F090EDA10C4F2FC4E7788E5BC12E
+:1097400027EA0AA73857DFF614E2F59F3BBFFD5C16
+:10975000CB0ED35BD637568C12E7B46ED7E43E38C7
+:109760008F13ED4CC689D45F7527AFF7487F79A476
+:10977000A3E5F6F054AD85EC669516EDC278FB5482
+:10978000ED9D0370BFF046C8F770FF54DAD12A8010
+:109790004D0057317EEEA2EA481CC999D1BEC27D68
+:1097A0000CF7FBAA2004C0FCF16C06AFA7BCE5F9DE
+:1097B000D682F3B2E4367A6F15E4660CAE7FC13020
+:1097C0009DBEDFF0962990ABE9242F560DF09F97B0
+:1097D0000CF2D249BC20E56291782F475E07799B55
+:1097E00082FCF966DBD03CDAA7D935CC89F45C6A17
+:1097F000E2EFD5F95FD7F9B90C2CE5E3B99184FC18
+:10980000A7E9FD020C2E907FC3E2E8FD82669DD59C
+:10981000FDA9137B5A2BF8F856AAA52C40F3AAFBF6
+:109820008AB7E6F1FACFAD795C2FCBF71CE889EF68
+:109830000D2EDA6FA1BC8815B4E47B3A3957555325
+:1098400077FFCF7B45C8794DD3C7FC3C166BC98FDA
+:109850003C87B552CC2BE54BB7C6799F8E8DC4AFF4
+:1098600043CE6B849C7F8E71FF649B33E13AB8B525
+:1098700005481384D6FB3B079DE793E7FAE6300FD4
+:10988000B5F380DD28D71EFF6A7AAF7E016BA4EBAB
+:109890008B8A6667205CC3DA46A7C27CD7AEAC7FF2
+:1098A0002515B09BD6B07A0CD6B9A70666BE826DD8
+:1098B000C57AED73BF93F4C48FCF6FD16A975F0EF3
+:1098C000CFBBE1B951CBB18E3C59E77C606F703EA4
+:1098D000803CB9F5C473D7077A71AFD00BC25FEA89
+:1098E00045D512E6D692C3EF8174E849D16D7F4D1C
+:1098F000C73D16731B9D43A9D9654BC4FAC902C65F
+:10990000FD76B80EC4FDB5D4832F2D9CEF5F3EAF1E
+:10991000D17B365F6A8CBEE7D055DC20E34FD03F69
+:10992000AE77C762B8FCEBA2AE97E14D1D941DF671
+:10993000CF5F9A0243E2B3C97F3F83EBB194781FB4
+:109940001888E7F55ED05C4B01972FBB0532F839DC
+:10995000810E3FC07E8A09D7091FB4F0BA9D31DE5F
+:1099600095EBE80A4F9B95F9713F4B2B7AF57B8C71
+:1099700043CEC5D79B3A04E8B214598475C9128FF7
+:10998000B3333C9689E7EFFF81E7E3FE9E8CCE057B
+:1099900019E9A939F873BAAAAFDAA2393ED24F4908
+:1099A0003CCFC58BF3EBADBC4C5E6714F831E6C819
+:1099B00073C0F3CDE66817EA6B85D9FB67D473599A
+:1099C0007F9379F1FECC2FC81FB0B34B7BF0F3C768
+:1099D000C1AEFC706B473E9E15F693B28EC58A3BB6
+:1099E000AF477AEC0EB25F53998BFC451F7644D299
+:1099F0008BEA583AEE10529DD74BEBB0A1BD86369C
+:109A00000AEB28E42F0324AF318817AD2B841511FE
+:109A1000B63A269EE830FC30233B3D1CD700EBDDF8
+:109A2000F9310BE079AAE633D34BE3A07FE7D766A1
+:109A3000CA831E8F79211DBF23B1F3E4FBE958EFE0
+:109A4000A93FB385E021AD634FF2FAD9911938DF10
+:109A5000F6D356A78DE280DB890EB24EB99D311741
+:109A6000EE83167D184BEF19171E6A8C21BA89BA3E
+:109A70005AB15877F1695E0FD985C030C803DAACA6
+:109A80002C18112F5B1C2A5CC422E04C7C24C011D2
+:109A9000758E4BCD1FED7D445D6D281B1A595763A4
+:109AA000ED899DBE4F65DC472CD038DE9FE679BA44
+:109AB000F5A13ADB549DD3FB471DE975756C200D6C
+:109AC000E3DBE65B37A461BCFB78CC8F44C7277E21
+:109AD000B0A6215D1B46FD27F99106B83784F9AF82
+:109AE0003910C5A8FEB590EA6B570B3FFBC4D94FA0
+:109AF000582AD0B3A18891FF64C20FCBFE86B3A7CA
+:109B0000E6233FCF14DB9D681772453DB4FEAAFFE4
+:109B10009BDA12418F9D10570781C1DB21AE0E42A7
+:109B2000ECBF0DE26A84F1BD536C37435C8D6D0070
+:109B3000E26A6C9F82B81AC7615C8DED131057639F
+:109B4000BB06E26A6C1F83B81AC73D0A7135B60FAF
+:109B5000435C8DD71BCECE2A257C0E337ABF7E493F
+:109B60004CBC09ED2BE01F8D75A1B7DD83A2911EC2
+:109B7000579D3629FC2D6E8D56E0E1C713C3FC4579
+:109B8000FE1FB95CE91F72284BE9CFF4F755E02BB3
+:109B9000EA062930D68722EF4F9F5FA2C069DE090F
+:109BA000CAF8CB2AA72A708AE706657C52D92CA569
+:109BB000FFA178031F03D526958FFCFB0A678A63F4
+:109BC000E97C655772FAB0E08B841FF9855ED9593C
+:109BD000DD766E1FB95FCFF381CB056E8BFA384906
+:109BE0003EF71D1DFA87DC02E487896F9BBADB62B2
+:109BF0007A015F721F31313C5748270E003F87B80A
+:109C0000EF9192533128977BCBAD51C89FDDEE92F7
+:109C1000688497945BD322E5A821D33B88DE53F078
+:109C2000F2F5C9FB1F2A997ADE7DF48751FE7A9FEF
+:109C3000A77FC2822CD48773E8C8E6D37E6D988E46
+:109C400053E9FB4ECC3B5FC1DFA8170C37E9D3F0DB
+:109C5000B976959EEEACFB900E4F3C6AA673581DEC
+:109C6000F389FBE57C63F4B3312DF9E7E2BFDBCD8B
+:109C7000C743FC1B8574816729F825BA9CA3903ED5
+:109C8000BF11FAF66F42DF1E177CC53C1661E6E095
+:109C9000F749BE35CC7F787C2EEA4D11C76BDD3598
+:109CA0000F6B686E9298ABDE1141D747051E4F8946
+:109CB00075ADC579014EB9C6AD21FD32EA3C1AEA4F
+:109CC000DB15F7B410FC84D0EF1EB56D74BDE71D35
+:109CD000416A2F9F1FA2FE31FA73B48E0E3AB85418
+:109CE0003A1AF91410EB91F386EF7FF100CADB19F1
+:109CF00037C73FDE1FEB467F11EF77B878EB14AD27
+:109D0000CB85763FDEEF16706D3EC2DBC4BAE2FD56
+:109D10007E8203625D0DF3930F6C70869FC79C3546
+:109D2000A6487FD3953C6D15F4DF2CE864BC6F9B8F
+:109D3000A576B0A313BD92ADF4A745474C06BB135F
+:109D4000ADE8FD01FC85FB8177C80FF83DBAD8BFAF
+:109D5000223A4EEBC897AA489E56C7DCF406E6DBCB
+:109D6000D71CD219F7B7935F417BF9EE781BF9D373
+:109D7000E6F1E37A46CA5D9358C75641F7617EF72C
+:109D8000D13B60FC448F8DEAF14399BBE79D30DF06
+:109D90008449BA2B08F31DEAF0279E187EDE81FB6A
+:109DA00093A9620D7B264DBB1F9FFFEE21B00BCE0A
+:109DB000309EB27F73D9B489FD908F21CEC7AEE8B3
+:109DC000F39AE0D72B02AFBD825FCD42BE770B7F07
+:109DD000B253F893EDE84F6CC8E722B11EEE4F3650
+:109DE0000B7F12427F02ED5BC29FBC89FE04DA82C8
+:109DF000F1D9A3C96EDA35E14F2041A1F3048B9468
+:109E00007549BCCA7AE80ABFC626C728FC1A1D9B3A
+:109E1000A4F49798D315D87D364B81AF3ADDD7E0BF
+:109E2000A754BF32FCF870839F2A51E0218726286F
+:109E3000F757B8A729FD538A6628FDE5AED94A3FF2
+:109E400013FB6185FC775618BD56A73C57EC3BC900
+:109E500078EADD329DF66D86BDA7BB22F5B690751A
+:109E6000EC9399709F0CC217A759CE97A5F4531C79
+:109E700075C8E249C7F37BF5152087D0161F8238D5
+:109E80008D8A8F20D710F7167AC6511C08F1D26040
+:109E9000E2431BDF6F92FB56C30CFB4F13F2D5FD61
+:109EA000A9C20BEC4F8DE8DB455CD62BE9A2E23270
+:109EB000D02F8ABF1E8FB9692FCACDB60F214EC5CC
+:109EC00038F7C39F53FC25E3B6AD9FFD9CE2DBADA5
+:109ED0001DFAE255F4A550E8ED9643594D2DA06FBB
+:109EE0009B5335972035E94B91D497166137CB6A50
+:109EF000E8FA1071DF568B2706E3BFCD8797887984
+:109F000023EC08C5EB117604F34896A8F6A7A687BC
+:109F1000FBB338B322C733D6D730DF20033CDC3065
+:109F2000BEC4004F308C9F6A806F308C9FA5F43781
+:109F3000C1BACF176F6F16F6418E2B347B7457273B
+:109F4000F676C821D5BE324F8D72EEA1F9E85CB22B
+:109F50009B5B8EAC10749CAFF0678F7CCE21A0739E
+:109F6000FEB9F79798FD31FD410E4A0E9B5DF5CE87
+:109F700030FF249F18E6C311F395DA7545FF9A0E5A
+:109F800073FE76B5CE5DC23EEF107EE66543FCA65D
+:109F9000FF70FADD29203F5B5A4C945F6D393435F0
+:109FA00009E7DB7D760EE1DB74D844EF91ADFFE38A
+:109FB000A46BF17D45899FC4A7F0BD2531B8CF7A48
+:109FC000A6C544F6AFD0E24972744277A37C7535DA
+:109FD000AF945B08A092902EBBC10FD1B961614FC5
+:109FE000255DF61C7D8CE8BEEDF0E224A4FBD5EDEA
+:109FF00026852E23DBD4787DC48944051EFA318F53
+:10A0000007C1EF2AF4BD10DE46BDC09D1115BE5C30
+:10A010001D7F91F1C076C1A76D824FDBA35C959D3A
+:10A02000ED6B6C3B669D1FF95D854FFBF2BAD1A7C6
+:10A030007D79FD6D33F011EDEC99E326B2B3231C6D
+:10A040008D7A6D27FC286E3519FC841A375C6ABE40
+:10A050007AACAFD8EF34D8C5AEEE9776B1447E3F38
+:10A0600025744DA7E763C37C10E72A0DF49471F4BF
+:10A0700085F926CFA31BF8D7C5FDE179FCC67CFA8C
+:10A08000BFFA62FDA5A582FCCDEA98B7843D7F8B1F
+:10A09000ECF93BDF0B7BFE7D778A930E8EBFAC27FE
+:10A0A000EAD1C10E3BCEE222EDB83C0F196A7D2702
+:10A0B0002632CEF70879DCE97E77E200E4672FFDEF
+:10A0C0007F34DE794BC43B6F62BCD31BF78178BC15
+:10A0D00073C03D9BC73BA91A7D2F6649CC55666F5F
+:10A0E0002772FABF3DCE9952A4C639E52E35CE91DE
+:10A0F000FB07BB1D1A9DC39A98A7C63DBBF117ACC1
+:10A1000033D9B500BEC7B5DD3DEDBC763828F4FBCC
+:10A1100080E0CF6BC20EBF22F2861D487FE24B99D2
+:10A12000E00BAF57149F76C5BA9CC89FF93C2FCB64
+:10A13000ABA17C7AA4F4EFBE5A1A7FF0CCACD3F872
+:10A140007EFF6E470CD55976233EB0848316EF69A7
+:10A15000FC7EC56EB7E65CD2495E3FA24DB50332C8
+:10A160004E9072B9BBF51392CB5DEDE7F7A7D27EA7
+:10A17000C971AFB1974A913E57B5328679C385EC24
+:10A180008FD12F5EE839C6F123CC8D7A677EC7F870
+:10A190001C4F7B50C7F3CF3BDB4249B85DE7091E3C
+:10A1A000D0F13DF0E2B620E1BBCFAD39F44C1A5707
+:10A1B0008AE7A25F3BFBCE44BCBEEBB4D964A37D6F
+:10A1C0002607E96DB1D0CF37CF9A625D445F9DF627
+:10A1D00039826D9FDC8FFAEAB7EBF4BEC8EEB38329
+:10A1E0009223E9B6EA4A9DECC9F6D13613D697B761
+:10A1F0009F368BF3D6418A1F76B467C562BBDD0DEF
+:10A20000FA43F62244F47FEC4A07DDB713E6E3761F
+:10A21000C249784839089E369575F6BD9DC7AEE4AB
+:10A22000EFD18F38FBD718A4CFABA7F7C4A0BDDA06
+:10A23000D5C69F33E29E9618CC33DF6837C5F1BA96
+:10A24000CAE064BCDE3CE6DED841B8AE3613DFBF00
+:10A2500011718D7CDEEED1F3A89EBFBB8DE761BB93
+:10A260004FF3FAD1F6003FB7C6841D93E3B79F9E24
+:10A270003AB11FD60F02161A3F820556C4C3B8570B
+:10A2800052B65E49E76BFCD52CD2EE953AD438A78E
+:10A29000A4CDE09FBCD5A407920F07BF9D7A4D05C2
+:10A2A0009DAFE77672BC59B52FBB4E2F499E8ACF22
+:10A2B0008FE5CF67017EBFCCCFF0C71CF1DD95FAEB
+:10A2C00031D74D2BC7F936F373662362557B767011
+:10A2D000D4ECDF2EC4F3FF9B62C8CF6EC7F5E3FC5E
+:10A2E0008718D5CF76973D521A8F75EB56E6E271F7
+:10A2F0009C6AD74BCF6CDA1B0FE3DF59AF117DC7D8
+:10A30000E5A9EBDDE9CEFE35E6C1675A397D653D4D
+:10A3100049EAE59ED6C41BC93E8D86BB818EEF946B
+:10A32000BD4475EC5B03EA3C4337C628782F6C4983
+:10A3300034E46F6A7D1CE24D591F882D1F12CEDF59
+:10A340000ADB797D7DE80F53070701DFE2D1FCFCD2
+:10A35000BCB12E3EDE6C53E32C435DBCD0581737A6
+:10A36000FA73118F0D11FB1AE7C43FC2CFC97AC32C
+:10A37000364B7086E712E2876166485DE85CAF376E
+:10A38000A900E8FFB2882F87591B7E9606AAB2550E
+:10A39000F78F6011710173F859F290707E3BFCB831
+:10A3A0009A0F141D51E512F2C7CF319F5C897B9A39
+:10A3B000A4077E7E2EE222E38CD531FD9B5A80AF2E
+:10A3C000430F31B1DFF17FF6A25C357D26F73320F4
+:10A3D000F4E88EFBF38CE2EDE6CFAC24775BC6703D
+:10A3E0003F25E314B94F730D6B5956AAE1B96CFBC5
+:10A3F000F216A0E7A68373D317C1FCEF7D44DB9D63
+:10A400006C4BA1FC3E7D83925F0E9575A823267F41
+:10A410005201C6EB3645AF657FD3912531F87D916A
+:10A42000332113C969F38756867F1FA069878DF68C
+:10A43000739A0E5B69BF65DB0EAE27B2EE2CE3FCB0
+:10A44000D7853DDF2FE2DE5745DCB24FC42D7B447C
+:10A45000DC121471CB2E11B7EC1071CBCBC26F6E26
+:10A460003A22F4EF9E9800FF8E2DAFCB4A3C6FEE60
+:10A47000DD72D40C0BAEF968C89A20437FAEEAC9EE
+:10A4800078A7AA27E35255FB31C691AE8C2FB5674A
+:10A490002BFDA3D8954AFFD5ED830CF9C870433E38
+:10A4A0005262884726AA7A792822DFA5FC5ACD77FE
+:10A4B000AF8DCC7733914F3C0FDCD6F230F171DBAE
+:10A4C000F1AC84C8B8EC65A137DB8E73FFFCF28970
+:10A4D00053719DC56D27043FBE14FC6815718A2712
+:10A4E000CD7D7D7E0AE615A7AC78EEA32B7996F795
+:10A4F000CBFB4E043E8D8FF47F9F51D21886BFDE7A
+:10A50000F2975CAA9F5CA47E2C8DE3E7DC366BD1CE
+:10A51000F4FEFD85DE6BA9CBCF12E7926A07F07DD2
+:10A52000D1DAA1D86EB078D2F1FDA7CD9A6706DA5C
+:10A5300071FF6FAC9DFE3D095FBE3CD7C49AD03F12
+:10A54000F023C9F0F39C6646F98A12E0D3CCEB43C2
+:10A55000FAD8315F87417AAC87E1BA36595813FA95
+:10A5600079E6664E4777C655089E73AA9F77398E5F
+:10A57000D7427CFF18DC2B7DEF038F66E177B7B005
+:10A58000C57D329B9DBF7760C9F7DE9F5FC8BF67FF
+:10A590009B3008E72DC9E6FBA841B2DF33C4BCA657
+:10A5A000981D3DC99F7665570D792EAB56DF473113
+:10A5B000CA4B93B0B32F677A6674F61D8C67F3F9B4
+:10A5C000B9906D5F4CD6F1B905F67837FF2EA45BD4
+:10A5D000C7F7C05EFE7242CCCC4EE42CD87FE6B307
+:10A5E000F911725010AAD5C5DFA930A9F52D531065
+:10A5F000F97D26D64A7A3D1C179C78EE7C234EA81E
+:10A6000071DEB01635FF0FEFEF376878DEAC439E92
+:10A610009021C8FF83FC7B1A179227E3BEFD07F940
+:10A62000F2BCA4F72F788E584F88A5F3359B0EDA2D
+:10A63000D7611C69ACF7BDFD1EB7E346FC9BDF9BF1
+:10A640009E8EF1D7E691D7A5A31E6F41034FDFF38E
+:10A650005934DD1D09E3FA63D1DE33FE9D2D7FF50C
+:10A66000743C2FB365BC8417F2F1A3F8F8F79F7B15
+:10A67000EB31FC1ED8961B453F7B808F97B0BF66A1
+:10A68000FA28ECB79808AE781EC6437F7B5FF707C1
+:10A69000246FF9EEC328A71B5077001ED5D7FD11F4
+:10A6A0005EFF00650CAEBFDDC77D24128EEFE33E7A
+:10A6B00016096FEEF02F6DB191FBC7520EDF3E3CD5
+:10A6C00055F81DCEF72932AF29BEB83AFF9F859CB9
+:10A6D000BE21ECD501E13F5E13FEE315F41F940F9C
+:10A6E00073FFD12CF68D770BFFB153E4BDE1BCCBEA
+:10A6F00023E28B4A910FF33CAC606429CF7B1DB2FF
+:10A70000CE9F61EE2C1F9A5CA0C68993F255BF3292
+:10A71000A1579222A7653DD20D7972B6214F56FD01
+:10A720004A8979B0214F1E6EC893D5BCB7B87582DF
+:10A73000214F9EAA8CFF20DF29F6916E30E4CBB327
+:10A740009471613EAAFB36617ECDEE948F5B8A6781
+:10A75000DFFFBF8B8F9DEFD7FCFFC7C77F501F6305
+:10A760004DCAFE8DB17D53F8FFD785DFD82FE2802B
+:10A7700057459D639F88E7F6201F7B635CE7127156
+:10A780001D3FC721EB202F8B3A549338C7B145ECBE
+:10A79000BB6D1275A8A5C5DFF1731C6799E0E35B7B
+:10A7A0009DF2B1DCA5C67913F3543E8E772619E2EB
+:10A7B0003E35CE1BE350E3BC52BBCAC7516CB0213F
+:10A7C000EE53F938B2ADC410F74D30F829F51C0737
+:10A7D000C405ABFA15E27B09EA798EC2907A9EC372
+:10A7E000E8DFE5FB8A326EE888137CEA3EF326F464
+:10A7F000A1B85F9466E5DFDB307B2FC7B843D2EBAF
+:10A80000B7FDB83FDFF2979B889E85E8CF3BF1DF2D
+:10A810001BFAF1B868433F5E97C0F723A30761793D
+:10A82000D3CFE39F84490E7EAE8A85F0FB53E78940
+:10A830009B36F44B09C74B66472DC33842B799FC8A
+:10A84000F8FD5DA6DBE9DCDDDB5DC451C7FA65CA56
+:10A85000EF9F6A38EF5FC4BC5AF16B14579DEAE76B
+:10A860006EA4F94B5D6D5817DFFCA1D5558FF21C16
+:10A87000C5BF83628CB75EEF97CBFF7E8FA01F9E14
+:10A88000FFFF39FA4BFC502CF9DF16D57F6220010F
+:10A89000F36C88E6F09BFD3E9E8EDF1794FEFAFD7A
+:10A8A000E74F913FCD8DBD7C36E6CBDA1A7F22DFB4
+:10A8B000AF0C927E19E3B62EE35F439C7624CFFD66
+:10A8C00006AEEB1BE19773F1935283BABE7F43B49C
+:10A8D000E736FE3D18B78ECF957492FDFB04DF5F1F
+:10A8E00017F375D045CA157E9F2631E23D5803FE09
+:10A8F000925E2B0EEE0DE111C64B5D8F5C4727F289
+:10A90000E3B940DCFD4D67F2C326B9C47BBA9DC7ED
+:10A910007D16114746F27F38AD2B20D7CFC60CC22B
+:10A92000F75FE47BEBDC1ECA7766121D0D8E4CD000
+:10A93000A39B0EE974CE81897D7073073F8B35F43C
+:10A9400033E6B11A4B8AA8BB1AF7138DF503E3B9A6
+:10A95000B2E2D6CB15F8AAD3EAB932F7D9BEE7F5F9
+:10A960002BA3634718FC52A9C16F4D34F8B5690693
+:10A97000BFA7D6C5CDCC2CBF3324F6EB35277E7FC1
+:10A98000C7CC2914D92FBE03C4E9BDAC0BFD95E794
+:10A99000674FF57312DD3BF4632D7372FEF995F783
+:10A9A0004CF4582FF1F9A121D28FB928EFB50687C1
+:10A9B000D1F73CAD2EF5EF33047CF68F46E7E07B14
+:10A9C000368CDAA77C8E8F46D3FB38A9D43EE17350
+:10A9D000D2F535BE3C6A1FF3B9E8FAA3BE226A1F5E
+:10A9E000F6B9A96DF09551FB80CF43E356F92A09DA
+:10A9F0005EE9F3529B05E10DFEBD812C3F7301C65C
+:10AA00002C7B253C2F82CE997EC023828E57D43951
+:10AA100014B8676DAA323E7DBE53E94FF3E629FDB7
+:10AA20009755BA1438C553A48C4F2A732B703777B7
+:10AA300099323ECEE551E098BC4A657C94D3ABF4A4
+:10AA4000EFB96A7842CB79F4B9C1E73E8A7458E528
+:10AA5000F31CE5742A3BCAE95349ED2DFDBB117F78
+:10AA60001DE64637FA6D47BE83E1F976AB9DBFF729
+:10AA7000DDCDECD0BA45CCDFCD0DF329F8C27C4A50
+:10AA80003E17E0E789F33C4755BC2B95FB4007C9CF
+:10AA90004FCA38668CDE230EF3B1FB2D8E3F0F06B6
+:10AAA0003CEE1BA3337C6FE5E0E8695417C12D4CE5
+:10AAB000D6891DFD4CC4A731FDED942F4E7954A3CA
+:10AAC000FC0E56528E75C4B987B25D917F0F4AB69F
+:10AAD0006FFF8A7F6F2866CF3627D6C5A614CF4C66
+:10AAE0008A8AC8FFA604BF1F9D46F30D1C12057875
+:10AAF0004C5933D33A3B3FBC3E396EEEA36A3C1A05
+:10AB000096FF805DC4E3B44E699F5639D6D1F555A2
+:10AB100079E7DFB73929D6F58588D73E13F1DAA76B
+:10AB200022EEFE58C4DDC744DC7D44C4DD1F89B875
+:10AB3000FBB088BBDF17F1DA2111AFBD23E2EE15C0
+:10AB400022EE5E95B78EFEAED5998D1AD3CF73BE29
+:10AB500074C17A759DF3D7AAFB86731F55E3EE394E
+:10AB60000FA8F1DAAC656ADC7D739D1AAFDD58ABD6
+:10AB7000C66B33E6ABF6F17A6FA9025F57A9D6E54B
+:10AB8000AEF5A8FB86924FD3CA543B694B55E3B54B
+:10AB9000AED6BB35385EC7BF4382CCFC34C21F463D
+:10ABA0007C0F5E39EF58E07097E27E4D21F32CC5A3
+:10ABB000FD9C91A6D0BBB8DFC4DED7E93B904D78B1
+:10ABC000C730D0D73343264D7146F81DBF4AD7AAA8
+:10ABD000236A7DE4863BD438B8A25ACD67AC656A57
+:10ABE0001CECEEA1EEC74E33F81D26FCA195FFCE5E
+:10ABF000467BCEEF874C31D5F4BED2A5FA232B335A
+:10AC00009E1FE3FE889E9BA5F4933F320FE0E7244E
+:10AC10008688F714EAA386BE89FB777B3EE4EF17AC
+:10AC200000D943BDE0FEAB18A7B7D53E8EBE1FB717
+:10AC3000D3C2DF1BD89D16EB5A025D579DE5EF0787
+:10AC4000B076339D1FF3E27B235938AF7A7EAC3068
+:10AC50006456CE97590DFD97A14F3C2F3EFC1CDD4D
+:10AC6000FF1C3EE21CC7003680CE47B474FEBE41D6
+:10AC7000471C679053697F0A823C3E2AE8323EAA0D
+:10AC8000A2EF8C99DF67F49EBDCDD476E2197C3FAC
+:10AC9000EA735E871DC5D4BCED9A496ADE36C6717B
+:10ACA000FEBC6DBC5395D78979AA1D2877A976E09B
+:10ACB0009CB8A6859F43EC2AAEF10CC892EFE91030
+:10ACC0007DA272F6C5F07D4C2E3F23C43A1FB27AA6
+:10ACD000E8FD95653D19F16984839F57ACC77D1BDD
+:10ACE0003CFFF71E7FEFC5CC3C4903B03D3E569C70
+:10ACF0005F9CE4A2F95A39BF8AE0DF4F59E79E4FC3
+:10AD0000B485CCCA7737CC2C82BFD03F07E5AB30B7
+:10AD10002C47FF7BF012E728A59CC5265E60FFCE7E
+:10AD2000AFC481B21D1572EBB88E571C7C1FF59510
+:10AD3000506D08BF13F95D2AAF53DCDB63AA997F1E
+:10AD4000B7C51D3B06F83256ACBF48EC936DF1B168
+:10AD500010C6739B7C766AE5FEE78AD4C549E8375E
+:10AD6000B76478D3F15CE096946ECB18D8E9CD96B1
+:10AD70006E3D3A7B8FA0D93294FCEC96E63433C614
+:10AD8000A1A3CC0E33DE37AAC72C1DEBB1E3F07DB7
+:10AD900093648419EDD36DF20543A3E95CA897CEC3
+:10ADA00011C13A4A318E1DED98497FEFB1F93DFC52
+:10ADB0009B4A181F77ABC2FBF6A5F0F3D736073FC7
+:10ADC000DF3A36791EF1ABC0C5BFDF57D023D615A9
+:10ADD000C0E952F9777CE6C33FCE17EE2740EF95E6
+:10ADE000EFFB0C651130F2CB00AF31F2C7702E7162
+:10ADF000C561717EAEA5F37D9BBF8AB8628BA83B0F
+:10AE00001C1171C54722AE3828E28A15863AD0BB9C
+:10AE100022AED827EA40AF8A7ADE7E51CF7B5DC46E
+:10AE200015F2FCB5948BD495CC694B60ECAD999C34
+:10AE3000CE692BB54019ACA3740E8753EBF8FEE82E
+:10AE400015DE064F4901F65B5CE3601DA9950D63B5
+:10AE5000701D69556DF49E52A5D7EA746BF87ED2C9
+:10AE600013F45E947C2FEC164E1A76D39CB1647F5B
+:10AE70006FF18A73C77A6B21C9D7A316FA4E92FC79
+:10AE80007E5CE51CF57B4AB30CF4BDC9005B356EF6
+:10AE9000475E93741FCC0647D23D4D8C8DBA459CBE
+:10AEA000E7C597AE3AD1973582EE922ECD574D88B1
+:10AEB000E3EBE0FBA13631CFA1E21BE2709EF77A13
+:10AEC000F0F9A60A7D30CEB74ACE27DEA78916FC58
+:10AED0007FA8EFF9CF9DBEED63CA39D3B7057F3A9E
+:10AEE000E62DB9DF82DFD3AE0CDED713F525FC5E8D
+:10AEF0008D3B8EBFBF32E9CF99C0A755E23D0469B3
+:10AF000057AF13FA6B7CDE7BBEF3BFBFF35EC90C99
+:10AF10000B7E0FFDDAE02FF8DF0336D7A6469EF74B
+:10AF20007D0FF1035B79EFB53FA3BF2319CAE0F2B0
+:10AF300060BBC6E6C4EF0C5ED1C3BD1CE998DAC3A2
+:10AF40003546D447C99FD9043EA698B55A0A8E1FE4
+:10AF5000AE91DED65F3581CEFF5D770D3F27F1FFE5
+:10AF60000010785941008000000000001F8B08008D
+:10AF700000000000000BED7D0B5854D7B9E8DA3320
+:10AF80007B1EC0A0838A1912B003A819531F230F78
+:10AF9000051C70A39812436410548C8803A2D0D669
+:10AFA0001892A6B7F4D4731804110951D3A63DDA48
+:10AFB000F818CDA3BDB9DE9698DCA64D73CE21C698
+:10AFC000A4696F12B1471BED6D0DBE92F46BBF1EED
+:10AFD0006DD236A7ED77BCFFFFAFB566F6DE0C6825
+:10AFE00052D3263D852FD9AEBDDEFF63FDCFB5B967
+:10AFF00072057EE633E6606A78C8C7F0C77245819D
+:10B00000FF4798579D83EFF18DA19E5DC9C4FFB79F
+:10B01000B26032BC0F7EEA176C266335ACD53F00B8
+:10B02000EF7BF3B454F774A8AEB35D187232E683C5
+:10B03000DF2B59D047CC239F354CA57A39DE920AB5
+:10B04000682FC767349FA17E6B0FF33AC642E14F6A
+:10B05000B0BA89D05FD46D55234E9CAF37F839A76D
+:10B06000E6622C2BDDD2E080F554666C5ECD264086
+:10B07000832A877B0AF60F2CFA796E1E3C7DEBBD86
+:10B08000B83D6CD70CED4E4DEBCEF04E8FAD6BEB6B
+:10B090003656128279B666FC0FCFFA646CF7BBF6AF
+:10B0A00010B6B3B1DA7E18BF77C12FD3335DB1F6D6
+:10B0B0008766954EF3E7C380E5A98CA53136D51E8A
+:10B0C000CAF24F1FBE5FC6C28C41938E9244C660C7
+:10B0D0001DE71B948803D655DB07F01B83F5975AB1
+:10B0E000F07D439FC3DB8B0B649AEB0ED8E77ABEEF
+:10B0F0004DD630A52B7F009EEBFB9A2BA8FD2EDBB7
+:10B10000398497137E11BE19ADEAB928BCB03DD37E
+:10B1100095711E53D98E73C07A17F89327BCF949DD
+:10B12000F8772ECBBD62E5F847F8D68AB6090DD57B
+:10B130006319E2D303C02C1CBEAF95EF59D9C07878
+:10B140004604C3F263EF4F37652786B01FD28D5395
+:10B15000D0D52CF8BF9779ED7310FF9CAE6A045DD3
+:10B1600079197B9EE82A6C0B47D709FB62F7D962F5
+:10B17000749765188FE17A97EBCBD45F3B3919D67A
+:10B18000BF9AD15C6C75A085C3EB3E4E8F4E78297B
+:10B19000C689D11B8C1334D11FE16BA258278CB305
+:10B1A000ACACECFFFC1060F6E8CEAC3B104FCBFE35
+:10B1B000D1CAAC305F3534C37275AD12894079792C
+:10B1C000E056E287E5FAF1E17D4D8DED821E3F6F9D
+:10B1D0006CCAA671D694F371D826DDFCB4BE9D046A
+:10B1E000CF20635BDC3A7A7B33934D6600C7E77709
+:10B1F00037EFC3FE171F7430A423867DE720DE39A6
+:10B200005C4F02ED22FDBFB54D891C84755FD8ED02
+:10B21000A075BEB94E8930C43F733F3E00EFBBFD01
+:10B22000294497171342FBBE08F58D5B93FC61D848
+:10B230006FCFB8D68D4198F7624AA81EC769DCFA6D
+:10B24000494B18DAF724869D59386EA3D57F10A68E
+:10B2500058A9024CC7C113FE7D133C1B7A74F883B6
+:10B26000FF8EF9151A7F898585FA5DC3E9C7319B81
+:10B27000D723C01DBAF52FC9B2D07A4F3DE4A0F54F
+:10B2800026CCF6123C1A0A12B484318847A6A93992
+:10B29000B09E746D12AEF38202FC09F4767E9912B0
+:10B2A00046F83095E3C57ED38D07909F1E15FBBCF5
+:10B2B000F0C0DC4948CFE75378FD394F6204F77599
+:10B2C000CECBCB618F2BF218F2861AF22D4FE6FB14
+:10B2D00050800E1AC5BA1ABD162D01F0DBF8D08ABF
+:10B2E000CF229E1B3D7DF7E0F36472385981FE6FDB
+:10B2F000EDB6328437C2C39983F545CD586F86CBFE
+:10B30000257F16ED07E1371EE0F6E6AECEE410EC41
+:10B3100083B959C83E310687869DCF7C419949FC47
+:10B320001CE6FCCEF94461BAF318E877A5D71E2EC7
+:10B330008771D8D1C944B72BDD9C6EED855B52B3C4
+:10B34000783357943EBC54EEC3F3BD51941B906EBA
+:10B3500001AE2B915F66223CC6CD1980F7B54D46F4
+:10B36000BADD3261F303D5B0CF7505366685FA755F
+:10B370001ED5C037556D463E827D1BCA636633DAE3
+:10B3800077CF38419FDD9C3E81D2270567C4E862B4
+:10B3900097DF42ED7075B651E06F86EBC70D0EE793
+:10B3A000905E41DE9CCFF0EE2B24B900F4C3D7C5EC
+:10B3B000AC3A7E68E87110DD33200F8413D0A7BD4E
+:10B3C0006A468C5E247C1A7675103D3608BA6BECA2
+:10B3D00003FA19A3A32313BC70CFAA9C273B46678B
+:10B3E000541F87CEBEE767C44792FF1A58B09E59D4
+:10B3F00087F3B57C129E8B109F9FA90DA7E3286150
+:10B40000EABFA3A4682CD1BBC007173DF4E344BC3A
+:10B41000254BFC84D9093CCF5DA2D2DDA69C2E032E
+:10B42000796315E7AC5D1B8C0CC0FB94362BBD47D4
+:10B43000F9A2427B9C9621C29F9BFBEDA9504E1026
+:10B440006597C0ABD5EA4A43782533A3DE338E999E
+:10B45000E4899FE355CAD99D369686E7718238DF25
+:10B460009B17652BD86EA7A2907E602F33D281D513
+:10B470002407BCB32DE2BC0BCB738FE4ADDDC9F761
+:10B480009B906621BEF86D3A085425060FBBD8FF85
+:10B49000B8016FFF00D4D77B9CFE0894C73337C92F
+:10B4A0008752986940376F4D45121BD0E179917BE7
+:10B4B000BCA1FC29CF4D86F6B779B30DF5B7FB3E9D
+:10B4C00069A8BFC39F6B28DB994EAEE33A8738DC8F
+:10B4D000ED02CEBA7A299707118FD5621F3BEC2176
+:10B4E0004F10CEE16ACF7A92CF1D259FF10CC13E5D
+:10B4F0001C1ECE7F76D42761DC84294D6ED2238436
+:10B500007C2E805FC443270E9216A333BB09CE6600
+:10B51000FE33EB930DB385DE730BBB85F41ED7B8FA
+:10B52000B8FA8D597F031961417A4D14F85A647540
+:10B5300091DCD85A03FA9C82FAE552AE2FF9EE2636
+:10B54000BC06453B16B690DEBA5CEC5FEA5FAFB571
+:10B5500033367033C06301D7B396175CAA41FA340F
+:10B56000CFDF2BDAC97262C1014D8B234FDB057D22
+:10B57000250578FD722753510EC9FAB090B7CB85D7
+:10B58000DC5E027C8C745B894F9DDEDA27C6E98B1A
+:10B59000D22B1BCCD1F3E9214545382488E2011692
+:10B5A000EA9B9D8A700E5323AB2BC888BFFF04D043
+:10B5B0009D437A0CFD94CE6EDAFB79A05F474DB2C5
+:10B5C0001F6D0B87D6F0D857017E8935497E8B37A2
+:10B5D00046EF64774079828FD37B6DBAD34FD561C4
+:10B5E000EDC4E43931BDAC46E877A9AC95F8609874
+:10B5F0001DE3E47439B21DC3CF1F399F439CFFCCB8
+:10B60000BAC94F7417E4E7BE057E91EE96D51AE9E4
+:10B610006A4568743AFB96A4B3B96C2ED159680395
+:10B62000D18543B4D93109E885C389E82351C2578C
+:10B63000E8DB36950DA880A763887F58A4CBC69217
+:10B64000719F83DA0BC417833E66D3D3413060D534
+:10B65000223A3C0E16B24437C897411BCB7810DA19
+:10B660008DD1562C76C3FE064B1DC90D74A8460C11
+:10B670007AFB3118F7AC8B8DA8EF9BF9612AFC039C
+:10B68000E5C0D68C373DB89EAD3646E73D0B5FAA88
+:10B69000D5A0BC5D96D92F6A4B61DCED09B2FCEEFA
+:10B6A0002EAC7F3C91972F3FF9A75D241F805E1140
+:10B6B0001F49021F49527F9FAE832BE0C13921876A
+:10B6C000CE19A709DE66BD5ECA09F3396C9EF74D37
+:10B6D000139E46DAF7B0F50269DE323A5FFCC76CBA
+:10B6E0009297AD06BE183ECE00E9EFABC4BE2D4921
+:10B6F000CF6584E2D89151F86FB0FD4A6F2F009C5E
+:10B70000BFABA0DEAB41EF398C8B0E18472978E92F
+:10B710003F51FE2BBBC2E3108E56688072DEC642DC
+:10B72000B41EC9AF0948075684FB00D583FC1D52DF
+:10B73000B271903A37C24581F6571029D77A4E96A2
+:10B7400073B9B6529C7F9538258C57D9C34AD13EE0
+:10B750004F58B7F6E03694739A03350A787FA914E8
+:10B76000D707F59A839E9734C41BD0B341EE3C5F54
+:10B77000F287B71F817EDD8356BF03C6ED0E3CCB3B
+:10B7800050EF7E673AF3E3A6BBB021ACAF3EE45E78
+:10B7900064F722DF0C9CEA9AC2D8D9763658661B29
+:10B7A000BEDEC12309762F6C36144E99F9348CD342
+:10B7B00053E070A33EF7C626AB1DF134B8B9218C17
+:10B7C000C0389D16EE57E07D8F1A6268DFDB377553
+:10B7D0002E42BE3B6D0BFBC7C1B36773F82EB4435B
+:10B7E000346F457926ACFF608F5A1E89733E6FC84F
+:10B7F0005188DF5E7BFED3B4FF6369767F028C3BAA
+:10B8000084FE0DC0DF31DBCE0C3F8EDBF1950C1CCE
+:10B81000FFD8BAADFE23B0AE631D0EB4A4D8B1DD1F
+:10B82000CE5A1CF75871B367BD6E7CE74DF6567C57
+:10B830003F78A3DD9E4DFBB99CECC1FD6CCA1D8F0A
+:10B84000B4D99D669FB416EBD73733DCAFDDB3D3E5
+:10B8500086FB73AA6C179E2F9FF05C7A752EDA4BCD
+:10B860005ECB9C4F41FBCFFB43B7E6001E57B69D16
+:10B870005D8472C95E96B2059FDD629DF2BC92F84E
+:10B880001D4A6B74E239D6DDB496FB613C9606C264
+:10B89000639A2588E75177609D73EA74FEBE79CC80
+:10B8A00070B874A3DF6516AE73BD67FD0C6CF7BB93
+:10B8B000F610B41B2A76D4C68363630E9763CECE8C
+:10B8C000E6AC365877F76EA71BE1D3AD847635002A
+:10B8D0005CC3992EFF63DEE1FDBE25FA49FA003C08
+:10B8E000111F6E387CC3EEB08AFA2AC723C0C5691F
+:10B8F000D3C9CD43B34A9B111E51789BE74DEB262C
+:10B9000079D1AD70BEFED6E159BBC3509EE90FDDC3
+:10B910008DFD8EF500AFCDA27D4E427D7F24FE19B8
+:10B9200012F5DD1DB0EF38FC3FD46465378FE5CFED
+:10B930001BE03975B3759212073E43C56BB3D04F08
+:10B94000750CEA2D30CED06E277FC2FB2CA4AF1130
+:10B95000E873560E97F7BE99C12D39687F4DF7935E
+:10B960009FEFE5D9C1AD39A407B47AB0FC31A0DFAF
+:10B970007D1F11FA65EC46A4D7E9BBC3609232F78C
+:10B980003883DE3AD2F91964432A9EC71D257F68A1
+:10B99000417BA07786DDEBD0F905A51EBDC4C7E5C8
+:10B9A0005B70CA853C38B959F5F4F564DF80BE4C4C
+:10B9B000FE4137FCC6F30F06D11FA893874B4C6599
+:10B9C000A99FBE94037211CF7DA127A77B7706178D
+:10B9D000A0FDF18AD51F01B86560072857552811C9
+:10B9E000D4D73B4A9E203D9E093D6E8958E74FDBE8
+:10B9F0009DAC6C0A8BDA732BC5FBA496B38FA27D2A
+:10BA00009D84FE4FF4D7B638BCE47F41E4C3FCD537
+:10BA1000627FD2AE233D12F6B3B245F841D9835CC2
+:10BA2000DE5803F9480FB00F835D1264263BA4C9AA
+:10BA300066B0E75699F407B3DD506DD21B76A0EEE1
+:10BA4000847AA1DAEF447A7A777ACEB12C2F5587AF
+:10BA500007A47E0FED420527B60CE9CE9F1342FEE8
+:10BA6000FCB85D3B8DF2684BF011E710FAADD5885C
+:10BA700013E5496FF9E79291EE7AEBACE5486F83F5
+:10BA8000EDE5D4EEB5F6203DAF08B951E1D77E4FD4
+:10BA90007C29F4B3EAF2D2D35D3ABC5669B79DEE85
+:10BAA000D2ADBFB2A0CA5096F4556965ADFD71CE56
+:10BAB0009759B9D2EFA231833E6A3DE40FC5392FC1
+:10BAC000E43391A9EFEAE1989C2BE846E853F74F5D
+:10BAD0005F3076347D46EE53C247EE5FD68FB4DEDC
+:10BAE000DFE55C9FF566BFCFF59AD719C5D308EDA2
+:10BAF0002BF1108373E077873B56A25CA8F0877226
+:10BB000073010FD565CA96F140273F16FECA1F077D
+:10BB100092236158CF8B3EEEFF4C6CE17665625903
+:10BB2000D5223C9FDE2FBEEF2C50883F6B024A444B
+:10BB3000837FDE2AECD59FFA18C51F805F5F4D8694
+:10BB4000F2EBC536EE47665AC51D7362766A621D12
+:10BB50008F4FECB033FF00F69BE6F26F86F7CB25F4
+:10BB6000FFD51AE310353536C33953698A3B249A19
+:10BB7000CE99A512EE7300EED931B88F647F8C4454
+:10BB8000274CBD94877E31337C369AE063B6772AA2
+:10BB90009F33F1C735DA3D077BF25E9C807A469988
+:10BBA000E29F82F8C32AE897A83D49E1905EC94721
+:10BBB000C2DE93F1AA1D4BABC9DE7B0DF581B1143A
+:10BBC0006F9A84FE6A39BEB4F366FAB5FB725347C6
+:10BBD0005EC709D16F6B557C3DE104EA09B3F8F308
+:10BBE00006784E5DBA30239E9E70A250E809508FB1
+:10BBF000FAC189DDE5FC5968D4135879EE55E0D2D5
+:10BC000041FB4D989237361EDF1D9B157A30570742
+:10BC1000F7245F2B2BD3C17DFD6CEDCBB8DF2AE180
+:10BC20008790F3817C3FAAD7C3CCF33D95E316F60A
+:10BC3000C6789217F27935FCA9EE56867476BF4D18
+:10BC4000AB457DCFEC4F3A9CCBF5C49E2CAD05EBBC
+:10BC5000992BE72AE376487FB56FF6441E7E20BF16
+:10BC60008FC91E94F6D301ACCC8FD985AA9BDB85F6
+:10BC700089E9978EBAA1AA3937F40CC2A3F85224E5
+:10BC80006C01BE735428A43F39D219E93DD76C87A3
+:10BC90005D63BB1E646AA0E7AD8DDC1F5F3A5BA5E8
+:10BCA0007262C87A90CE05931F2751BB4C76D8128A
+:10BCB000D00384DF86F4A953429F0AB256B2F75CE0
+:10BCC000B68813FD1566BF4D6DBA65602AC8F5DAF2
+:10BCD000824B35DE99D4DFE0F7A9F5661D4D15F5E9
+:10BCE0006E782E09723FD072F403E1F835919E2CE4
+:10BCF0008CC3F955BFC6B89D87FAC58AB55F98F160
+:10BD000035EFF5F30349FF92D417A53E03F2A5677B
+:10BD10003CE265A1E225DBDFE42732FB85A45FC6B8
+:10BD2000EC3F32FB8BDECBCD247C48FD4BFA7F7E93
+:10BD30009F6BD4C3FE0BD803DBF516C2910AFCDD62
+:10BD40006B63193BA773FF0EEA4BC74A7FE046FDC2
+:10BD5000E2BF4CFDAEF57CEB8673E83C9EAB2F2436
+:10BD6000D850DF0E7A42E44F5CA218F9242D4FF828
+:10BD70001BF35C7C1E1147EE6E6F93FDC3286F8230
+:10BD8000E9F64882121B8715E45F133F8D9DADA530
+:10BD9000E6E5933D72431ED2B31FEC9119688F08FC
+:10BDA000BE2F48A5FD302D959DD7C78DC5BAA3EBF5
+:10BDB0007082DD32E3FDCF3F218F19E6B91ADC76C0
+:10BDC000941439EDE88F001C5B395DB9A3FEFB2CA0
+:10BDD000F4EB6CF0EAF58A7A8C5BE4A2DEC9E31A34
+:10BDE000F2BDCE7FAE22FD26A687B4609C73F5CE51
+:10BDF000BC689C8CE2A751FFBB8F51BC488EA3321C
+:10BE00004F07F101F2AA5C8F358E9F5EACB749F007
+:10BE10000100DCE9009259BBD3CA785E02E713192E
+:10BE20008F500B83E599B0DFB5DB148A1BB370ED3F
+:10BE300051D4EFD7897ABBF0BF99E348EB441C8615
+:10BE40005937909ED6F49031BED6D8672C9BF572A8
+:10BE5000E9EF576191B8EE7F403C713844ACA3C321
+:10BE6000E100EDF36F140E920E2B723FEBC1BC9606
+:10BE7000EE84D0AE068C6BEF75923F846C48E497ED
+:10BE800001F885FD6CDB53F008EE675B9E95E0D70B
+:10BE9000ADF03C97A3695F730EE9E86D9BE0F35B3F
+:10BEA000F2BCDCEF82E7128844963E81F848E6B5A2
+:10BEB0001C4BE37AA53DC0F5C643938F2CE5715723
+:10BEC0009EDFE20BC4F25B4A013E33047C7C539A52
+:10BED000FC03F09C116826784C7FDA68AFDEEE3305
+:10BEE000EA953EB3BD6A2AEFCD8B9FD7128BB3097B
+:10BEF000BFBB58BF99AFBED9CEE32D4F80DD8ACFEF
+:10BF000043ED6E7A7EABDD43CFFE762FE96987DBAA
+:10BF10007DF49470BFDF16ACC7B896F4434AFFF8BF
+:10BF2000F7F3B8FDC6027C1D95622F8BACE9C908FA
+:10BF3000E7E301AE178E74BE54971BFDA0CB82C6FB
+:10BF4000F8DE8A5A637CEFEE99DA73785E26CDF4D8
+:10BF5000D842BA78D43AB1FF1D5FE3F12639FEF139
+:10BF60007FE47897E58B62FFAF0ABA483A9266F3AE
+:10BF700002B2AA1EAABA15FDF6CC9D734DFAE0498D
+:10BF8000C197499BDD36F40B550DACB4E338EB7625
+:10BF9000C138AE6B1F676BC6C40C637CE1EE3BB16E
+:10BFA000FFF1687C61E39DA5507F5CC417DE7EBA1B
+:10BFB000F5EB6117D2ABF673941FD63CED0CC2E3E0
+:10BFC0006D719E437908DFCB32FCBC9C3271543FCB
+:10BFD000FEDB79F9C3FDF8D6854A6BBCBC96CB79FC
+:10BFE000513FDAAF496E39A37EB44BBCCCE5919A90
+:10BFF000CFE7EFFC296BC1713A9F652D87E3E8F32A
+:10C000007FCC53E478EFE591FD2FE560F00FF1C6AA
+:10C01000B33AAA2621BC2FDA785E8C793C35DF2E24
+:10C02000C7B3E463FFF4E8FAD47CDD783B00068311
+:10C030008827D59D4C714D7617C53F251D25D5BB4D
+:10C04000EFC0BC05302C199E2F49DF71DF91877E30
+:10C050009C9F64FB1F6323E3F51782BEDE12FC7511
+:10C0600011F90BF8E8BCE0AFB3C85FF03C23F8EB84
+:10C0700067ED7E2AFFB4BD80CAA7DA352AFFA4BDCA
+:10C080009C9E27DA83F4FEC7EDB554EE6E0FD1F314
+:10C0900078D923B7E2B9F3DB6F2A248F475ACF67E9
+:10C0A0001EB51AF8A7654F9281DFD63F34DE506E79
+:10C0B000EA33C6CF1BBBB20DE5356DC6F8F9EA56BB
+:10C0C00063FC7C55CB3CC37C2B430B4DFC7CBB8978
+:10C0D000DFAB0D652D9FEB89D5E5AB0CFD1C9E46B6
+:10C0E00043BBA4A52C140FFFE5F99C3E8F94148D3F
+:10C0F0001D1AC5CF616FBBFDE7A89F44CB6A88A11D
+:10C100003E6F6F5B42EFEF4FE0E79DB95F7D3E3FD3
+:10C11000EFBACB9A820B18EA458BAD7ABDE7D3B361
+:10C12000424BF375F6A0DDC3EDB17726D7583D40FD
+:10C13000474BCB2EBF7803D051689091DDA381BAD5
+:10C14000E7013DB8A0F5C1853740B9267C8FC17E97
+:10C150002C6A79F205605F16283BDE3901FAFB672D
+:10C1600087EA71FC12CFA517B0FF828AD92A92F50F
+:10C17000FD298CF4D18B19F6C8C138F4706FBE62FA
+:10C18000885FBDDF73DA1CA7CFF2B152F42367F9E1
+:10C190002E95A25C83B286F1AF43B342F7229FC1D2
+:10C1A0007B0DE5E4FD33D667E1793252DCE86B02C2
+:10C1B0005FD29F20D7B5A384AFE7B8882F0C99E250
+:10C1C0000B3A7FC23FE58FE24FB828FA0D7D35BEAE
+:10C1D0003FE1A2883B5C947187AF55C78D3B5C5CA7
+:10C1E00024FC09508F7E848BBB6BF973D1E87107F7
+:10C1F000B93F388F1EA2F3271A77107ABEF09B1F23
+:10C200009BA5FD33D6AF9FADEDC2E76F6668BB114E
+:10C21000CFC775F14FF7445DFCB3EC0786F8E753E1
+:10C2200039A103F93C6ECDD0AEEA0CB3A1846C8C7D
+:10C23000C70637C6A3E3FF9D2FF5EB813F2B3EAB2F
+:10C240008BA35AAE7C925D731CE09ADB15F0BC1494
+:10C25000B37E9384101917D3FB9EC80B1D417875CC
+:10C26000A57CC7CBF3AF2CB1F30385DF08FA907937
+:10C270003E391ECA2B945B278063F09CD99E72A91D
+:10C280000EED94410137F3F3DFF3DD029EEE0988F2
+:10C29000DF27F2823F267C3FDDEFA5BC36F1FE5A58
+:10C2A000D7F1B83DF873D463BB1BADDE835C6F2759
+:10C2B000BFC5CD819448AF2E1EFC6B3C2FF3D1FF40
+:10C2C0003834D90EF8EE0CBDE0C27CF037F6A898F1
+:10C2D00011C3BE911CB621FE6B7DFC7C5BE0097D29
+:10C2E0006268143E077A186FF1D03A2C96023E2B02
+:10C2F0007F86157C9ADB0FEE7937D50BE37D632FB4
+:10C300008F7FDDBCB7C9D9A81B3F6B0E3F77BA91B1
+:10C3100066F2303EA9443051BD3670F9D5B9185F88
+:10C32000F15AC8CFF1C6A6DF9E5C817E47CD4A7E1A
+:10C33000C73736BD43E5535E4B2EA2EF0DCF6F4E90
+:10C3400062FB9BFF71DD446EB77078ACD994FB78CB
+:10C350006F26C5C59439008753DA3BC9D9D363F139
+:10C36000B3350A0BC6D363D2E670BC2DD65AEFC4E0
+:10C37000752D0E3918E6399F6AD8FA732C7FA354AD
+:10C38000F15AD1AEF7F1796AF7A8944F0BF0D98042
+:10C39000E557FC490CE75D107A52C5F6BF9BA1B08A
+:10C3A0001B94EB0857ED9D54E4C33790FEE2ACFFBD
+:10C3B000D7F2DC147C345505BECF41F81F75E9FD7A
+:10C3C00094929EBE94A765CF21BF5FA825487AEEC0
+:10C3D000D2ABE8A79B799EF6372FA9187B487CB48F
+:10C3E000F546F42F0D5BE708EBCB9BC3E5E46F0448
+:10C3F0005FDCBC577DF536A4E74D36CA43B8252F20
+:10C400003807F115B5B7AEF3B921F3D7060BF87DB0
+:10C410000450A7691E58AF4F8575242889FE30E760
+:10C420002BF2CF39C5F907EDB4B1D06E0DEB1F403B
+:10C430003F1F53B59D56F41F16DAC83E5EB1DA961B
+:10C440008C7889C5CBFC067BC3FC3C8FF131CAD309
+:10C4500070D27310EC6C8C97E00F68E250A90ABDA3
+:10C460007FC6C31AFCF37191577A6FC16D0F8703B2
+:10C4700060675878795DC16D376D862D9D9FD47A40
+:10C480007219ECABF741C5DFE1C5E7815D8D78BF7F
+:10C49000A24DF19743D3FA8169F518626CEE719061
+:10C4A0008E7F6EDB176E457A7DC7C3DC48CF2BD2FB
+:10C4B000383DAF3DC12216287FAAEF418A7B064F47
+:10C4C000A894B726E3B267D2785CF6CBED03B46EDE
+:10C4D000B46B17CDE12636FE8CF3C33AD08F5AA643
+:10C4E00052BC743C7377E3F992A86596727DDA6D5D
+:10C4F000A7384F05635F473F4F1BB79B0B455EA4B3
+:10C500008C63B10BDCBE6D815F9427E3CB8DF6713C
+:10C51000BEC9FE95F2CD1C6F01FA0FE3FB8E3946C2
+:10C52000FB7824BFBD7C3E0D7A04EEEF3B228EFBF0
+:10C530005DD0D7319EF92CE8EBF87C0EF4757CFFCA
+:10C54000AFA0AFE37300F4757C1E017D1D9F4741D2
+:10C550005FC7E74BA0AFE3F365D0D7B1DF8F405F94
+:10C56000C7E72BA0AFE3FBA78BF9F9D73DC51ED9D1
+:10C570000CEBEDB6B19F215D854B455C58C4C9B647
+:10C58000A54CA5F3DDF927A072D0A70695D06710BA
+:10C590001FE10C27B51B4CBEF4C7FFC0F2B64CB26E
+:10C5A0004398EAFDEE10F4EBFA62A6BF178A3D76D7
+:10C5B00046F2FEEC71E656409F796B993213FDA866
+:10C5C000E7EF50FAB13C788742FAC45464BD9CD876
+:10C5D000395AF4AEF7209E679DC94CD0E3237BB552
+:10C5E00074E88F6B237A1D5B8F76E97C872CBBEA1E
+:10C5F00035A0CFC63645D8A9EE7D48BFDB14D93F5C
+:10C600006D2FB6EF92FD45F98445F6FFCC1EB4B709
+:10C610004F46E76B5885E39DCC92F54D75583E1B10
+:10C62000CDAB2B5E8DED07A3E3E7EEC5F2F90C3938
+:10C63000FEFA5554B6C9F2E3D4FE7C2A6F7F4B71E3
+:10C64000EA7EB49BAFF7789D217EFEC139A6E9E36F
+:10C65000399B8AACE67C70F2BBC938BF25C935E589
+:10C660005AFCA5BA383FF94B613E1BF2D9E74B5350
+:10C6700026A1DC3D9BE18F6BA72C2C1AC17FAA2938
+:10C680003CDFDECD42981F9F28DE27F6F13C7ABBC7
+:10C690004F1D96477F2DFE4499F720FD89B54DA388
+:10C6A000FB136B4B8DFEC435A27E247FE21A933FB1
+:10C6B00071E526531C22F4FEFC89756CC086761841
+:10C6C000D314E2A33A77FF8B13D1DEBFE0257F229C
+:10C6D000F3BE4CFE56797F02FF6F9983F7CD78F950
+:10C6E000ADBB140FDA15BD772913F179E62EE546B7
+:10C6F000E4AF0B77296EE4B7CB73F93D98FCB7FD37
+:10C700002F7BF1BCF558FC1C1CC17FC15045B029E2
+:10C71000C5DB0BE39CBD4B1987FD57DF9769477A53
+:10C7200000BD53D023DB83FC624D520CE5BC499223
+:10C730001EF73E8CFC317FBCE497657B905F4BED30
+:10C74000B27F3B95578614D1FEDE3DDA64E0AF053B
+:10C75000B2FD843AAC5F962DC7DB4FE3CF4F92E535
+:10C76000AF12FFF544C7FB5F34DFEB2821A9FC00C3
+:10C770008D575A25E5D9742A77D7C9F15BF7625EE0
+:10C78000EC2A8BEC7F1BF1FF5A26CAA8BFC37EFFA1
+:10C790009F381FD6CDFDE32AE4A73BA3F57F7C1885
+:10C7A000F9AD4E949B9F79620FD6FFCDEFEF2F3CF2
+:10C7B0009FB9BC9A0D2EBA212FC617E673A5AE906D
+:10C7C000EB9D052D4FA2F86275AD07ACC88FB1B8CF
+:10C7D0005A5A4D10E9DB69A5FCB9A087DD1A2F9FD5
+:10C7E000FF0F73F9F9F485B92E83BC1E39BE167F8D
+:10C7F0009C86423E4ECF0216D7CE3D346BC1E6B981
+:10C80000F931BD0155443B3C4BE06981E77B334244
+:10C810003D588FB20BFD30D2AFBD44E41377947C0A
+:10C820003DB800EF2F15DAFCC21D3EA88FF7AAE233
+:10C830009EEBAA053CCF2BD4EB207BADA647E49121
+:10C84000585D148F506FB21FA0B89988A78630EF3B
+:10C85000388BF2BA46BDDFA19AE2A89D62BFA5B3AC
+:10C86000DFA538F5DA5778BEB08C63D78B75AD4548
+:10C87000B90CEB6E6C522216E8D7888207E3BA3EF9
+:10C8800016F166C6E2CA2BCBD4013BDE0B13F7339D
+:10C8900098D087A3F1F01A6F3FE6C7A85A825FC30A
+:10C8A00079D84090F2E2305E94C9A2F1672947AA94
+:10C8B0009A6FB80BE3D43AB94571EA44364C6E909E
+:10C8C0005C88E63589387A343F47C801199F6E1075
+:10C8D000FB5A1E9503154B50CF4DBC5FC4A945FCB8
+:10C8E00059C6A9AB4CF7DA1A030BC7903FD7AFFA7A
+:10C8F00029AD26DD789F29D18487A945FC5EA58CCA
+:10C9000053BF32D7186FBEDFC648EEF66419E9AEE2
+:10C91000A488DB3D9F2C927EC8C48104D4BF999328
+:10C92000EC905EF4E78CE5F6085DE632F975D4B676
+:10C9300055E47FC47A05E850F1BDF49F2897B15CB7
+:10C9400004ED55BCDF82F87059C81E95FE1F545384
+:10C9500016E5901FE8DC5CCC0369ABA771E47DF6BB
+:10C96000C713E3F3C7AFE74A3DA1DF86ED56795E13
+:10C970003A85F3FDD97E20618745F5182FCF7F4991
+:10C980009DEB9571091BBFEFC76C4B6790BFE4BD72
+:10C99000B9E41FEBF7E23AE4B9B4EC7B4FD1397656
+:10C9A000ED7170DEAFA1F0DF5685278C1CC7981A99
+:10C9B000E078F2CD0C3A3064CE26C8B883E6C49055
+:10C9C0007854CEE2460A0C72B6AEE5BF819C8DE982
+:10C9D000FDDE3A1CEFE3B67EA0A70584D772EE7F9A
+:10C9E000FBB8ADFF07F9DA4AA4C30F7B9EEFE5075A
+:10C9F0009B719EAD8A56EBA27B31CCAF8C1E2FDC97
+:10CA000088EDCDF1C2ABF931FEEEB718DD6FB1ABF9
+:10CA1000E0A3E9B7F832C00ECF6BE0A743C44F01E3
+:10CA2000CE4F7FEBE71FECF747B8DFAD4A7F24D14D
+:10CA30007AFDFD064FE4855EC7F1A7A63B1B509F1C
+:10CA40008179BCC87F517F08AEBBC0E00FD9D3F25B
+:10CA500021F843609F6F115ECB385EFF06F0A6148D
+:10CA6000E27E34AE47FC0DD2654621E2B09FEFEF87
+:10CA7000AF30FF0C9AFF10A797287C849EA4834FA9
+:10CA80005DCB5F073EA5B4BEEFF2F57D0CF0B98239
+:10CA9000E8D5CFD77B35FB7BC35CAEB742BF7AEA24
+:10CAA00097C7E960A3D0ABC12E5F78833766978FB5
+:10CAB0009DAD3516F2F87353A121CF545B87E55134
+:10CAC000ECE64F17A68E6A37DF8DF51F17BB798FFF
+:10CAD000805B2C6E13A17B7120C129BE5C2FDAF61E
+:10CAE000B6552F9E867935007F2C3B703F56DD7EF4
+:10CAF00032546E6F9BEEABC9EF1DC87DA9D6BAB19B
+:10CB000003DE183C5F1BD36AC7FB50CD5A4A37DEA1
+:10CB1000BB5DD87599F206ED9AC38B76E1273CDEB2
+:10CB20006E8CCB566B7CFFF61637DDEF93F7DDE4AA
+:10CB30003D94E681692FD9F1DE1CD82F69307E65DE
+:10CB400099ED9C7EDF0ED3BD14D5546EFB59E6F6ED
+:10CB5000A3BAF6DF284C36E437837E534EDFE9E88C
+:10CB600052DC22CF97F2329AC5181D25772E46FF48
+:10CB700025E8715E84C3C29D0F0E623CCDDE65A5C3
+:10CB8000D8F9EFDBBDDB8F024B25ECB592BFE1B7E7
+:10CB90006D0AFFDE47058FE3AF15717C66F23348FF
+:10CBA0007FB88463C2033CFFC35E70B68CEE37D699
+:10CBB000AD1BCCE7B443FE0695AF8CC9EF6F5409AB
+:10CBC000BAAA0F5CEEC27ECB3D1643FE90D91FA1E0
+:10CBD00032739E3CCFE354359EC7A9FA789E7C22DF
+:10CBE000D3E87B1D895BAA099F551ACFE304254929
+:10CBF0007C778BE3A532700FE5F998FD088E02A3D0
+:10CC00001FC24C97667C9C36E1E33195DF4FEA3ECC
+:10CC100061F587E175F7434D3DE83F0F3F64213FE4
+:10CC2000C605991F028B447FFE0A16852FE9CBDDCE
+:10CC3000AD3C5F40E265C54E9E3742AD0C7EFB7455
+:10CC4000A6FF8EC70AE157B893F5D37D87D56CC888
+:10CC5000867CB0065DE956F4C778E9B99685B730A9
+:10CC6000825FA82713E67BAC75BC1FFDDA0337DAB9
+:10CC700052DEF4713B229EFE1A8BD7AAEC4D9D9F8B
+:10CC8000FFEF7EADF7EBD7B286E97EA9C71E99A26A
+:10CC90005CDDAFF5238C4BE8FC5A17768AEF6D8884
+:10CCA000FB1683B6D6493B5DD8CE4BE7E5983D2BC6
+:10CCB00016231D1CDBFB03B7B8FFBA69E2E8DF856A
+:10CCC000C8298A934F7A7C2EE379209943748FFA8E
+:10CCD0008CCD98971BF51305ECC22F139A57941A15
+:10CCE000D38F993B9AC7595C44FE237E5F5BFA99C8
+:10CCF0009A73430BF07DF125410F154A4481FD568F
+:10CD0000BA9417156F6C7E66CEA3FF7B3C8CCB0963
+:10CD1000840FE63325F0BCDAC14C567B380E7E26F4
+:10CD20001773393A383B3EFE643DE827F716A57283
+:10CD3000FB690CF72BFCCA3EBA5FE18BF1E846E2D7
+:10CD4000F7D07CED4B1CEFBC9C9413EAC0F69DA180
+:10CD500020E5EBBCD567F57620FC075A5F2B80F207
+:10CD6000927FB2BA311EFE61C7F952E7665E539CEC
+:10CD7000EFB280EF99685EF7A67AD4077BA57D268F
+:10CD8000F4C755E3746538928B4EF0F6DF7B76EE90
+:10CD9000BEB03AB2BE79F773757BF1FEADD437A160
+:10CDA000BC1ACBB23F0B574C2A057D766D8B8C2776
+:10CDB00056EC43FD363A5F78F93EB4872ED88CE3C3
+:10CDC0004B7DF5FF3EBB681F8E1794F38717ED432D
+:10CDD000FDF7ACA93D7D9F12C67BFDD9526ADFC825
+:10CDE000E4F8A5B4DFA85F31BC7135F63F6997E57B
+:10CDF000CF523EC1F64C3EDEB1E736EE45BFD147DD
+:10CE00006D3D1FF6F8EFB7FD487AFF191BCF1F0CD9
+:10CE1000839EF65826A651F65B39F369762BD07FB0
+:10CE200091A6D079F45BF48343FFA0CB22E8EE1FF8
+:10CE3000F6A24EBFAA44EEF320E5818C44771B0294
+:10CE4000CF3C6CF4173FB3CAB06EB6B11EFBCB75C6
+:10CE50009FC0F6B0EE551B3FEDC175AE92FE8D70D2
+:10CE6000E75EDC5F778AEC376DDF68F38602DBF71D
+:10CE7000E2BCABA2F37C85FAAF4A94E37DDD98BFB8
+:10CE800012DE4FFE8FD8BAD61BE0F9FC73FB099E69
+:10CE90004177640B9E0F410FA3F3F8CE960ECAEFB5
+:10CEA0008EF2117B2083F8C8132DEF35F2D17DB4BB
+:10CEB000EEEBBD2E384FD3E7E1F9E7E376E2F5DF9D
+:10CEC000379C93B8EF3E2E87241DD5B9653F803F30
+:10CED000C893B55E39EEDDF52DD3AFC7BCDCDE0DF2
+:10CEE000FE8A917E2BF90938C9C43FD7365EA7EB7D
+:10CEF0005ECAA36806B91E2F1F7BE35C45FA336F39
+:10CF000025781648FB9949BD63F13C9D5F8E79A356
+:10CF10007A47C53C32408C7A4737E659CDA27C2E01
+:10CF2000929B1AD4787479403717F3F85AA7C893AC
+:10CF3000CCDBCCD6EBEDEDFF399FAFE71BF3B9DCD3
+:10CF400094DFB73DBF41A13CB1CEBEEC3178DFEDFF
+:10CF50005CBA773BCAB5C14C0B7DA7E08CF8BEE646
+:10CF6000E0171D19F7C1FB53194E3FCAAB53293BBC
+:10CF7000E93B6AE7FC56419FDF7903F959E7570C13
+:10CF8000A35C917EC396EF77911FF0B4979773FFE0
+:10CF9000ED9937F01C633EF3FDCE00E931F65BE11D
+:10CFA00018C1BEE2FB9C45A2BE6ADB535FADC63131
+:10CFB00084FE22E5A7F9BE27FED8F4FA578F95EB39
+:10CFC0005F1EDECEC3863AAE58705C5E768EF05D34
+:10CFD000D85A797FD9A44F5599EE2733F11D54A91A
+:10CFE0008F174D68F4A31D57B4C1A81F9DEB79A1FD
+:10CFF000AF00ED5ABFD58DC7E4ED3E63BDD4C31677
+:10D00000F73C42F628E885867964FEEDEDACBF8BEF
+:10D01000EE857B5F3E6A9D18B35B3ADD55A4A7346D
+:10D02000FBA004FB39F9A5D2E47CD40FFAACF84597
+:10D03000589E7BAFDB07B4B35926D039ED57147D2A
+:10D040005ED0E6FDC6BC205E8EF9E3DBF61BF2E89F
+:10D05000C277AFC172D4CFC956EE473E8AFAC5D85F
+:10D0600052AA3FAF0A3F186BD88FE759CCAF779AD7
+:10D07000F83AEA27634BF6233D05A3E7DF0ECAFB28
+:10D080005BEE16EB613F23F9D1A97179F2DCF7135E
+:10D09000CEE0F781DE6F7BE0CF67893F83FCBC3356
+:10D0A000D7179D88748E117A1DE68B9BF93C39C089
+:10D0B000F3EFCAB4D95DA95EEEBF72007EB4D5D6D7
+:10D0C000D5E83788E5AB14D277D2D68E905F725B05
+:10D0D00080F3EF2BF346CF53592BF254461AA7A9EE
+:10D0E00084E7030C2AEE1A2E97AD0CE572E983D97A
+:10D0F0002E8C4DC976A525FC1C786F86761ACF1B21
+:10D10000B33FED02FAD388CFB8DF63A9A01D75271E
+:10D11000FF5EBDFC9EC9F914977F33BC5FDA27FC24
+:10D1200015E57F9EFFEC57F38CDF151D29FF2120AD
+:10D13000D69F57727DF21F1E4FD43484D710B4454A
+:10D14000FFE0B07C0891E720F32012033CEF4EE6AD
+:10D150004374865B097ED7FD9E8B38FF814EC706E0
+:10D16000904E6BB91C917476749E97D3DFDB7EA2D0
+:10D170003F4977D03E358072A486B72F7A9B7FF7E0
+:10D1800042EA17C9CF0DEDED984C72E8A6805E0E0D
+:10D19000B9A2F722330271E4D0F185DA27023AFB13
+:10D1A00008FA670752E3F69F1288633FFB66067D25
+:10D1B000346EF43EA7360DCBFFDDF320589F39EFD8
+:10D1C000849F17E6BC13A90F36FDEB2F5663DEC90B
+:10D1D00095055A15C713876F54AF1CE27A4E4C9FC2
+:10D1E000F4733BECFAEB8B8D34BFC8A7F910C6DFA4
+:10D1F000A81F5FEA4FF0FE9E802E8FE7A366BFC197
+:10D20000FAB6047471930FD0FF01DA9F88D7FC053A
+:10D21000D6FB30AD57E8FD1F41787E3B90FA915E1A
+:10D22000DF0BB4BE0A713ECF63F2DC7E89DE0FA352
+:10D23000836BA6FFD702BAB8B96EDCE3FAF946B23F
+:10D24000CFA1DD4FA87FC530FE39AD1F7794FE67B3
+:10D25000689E68BB68FFB37AFABC0E7CFE4B3D7ECD
+:10D260003F8473E4F7B4DFC97CFC378BA270FC0306
+:10D27000CD2BDEFFDD4F76553AF71623BC5A393DEC
+:10D280005D837E3DB598FB6743DC3F1B96709F2610
+:10D29000DE0FE17DD2A5F3385DDD92179C5E9C1F09
+:10D2A000B36FA3F6087B781FAE376A8FE040D30DCB
+:10D2B000727E9FDEDE58F82F07F7E17AAD0B79FB1F
+:10D2C0008262F71A94B3E632E82345B49F585EE6CB
+:10D2D0003C2C5F6D5C8CFFE33ACDF17F5DFDA2627B
+:10D2E00063FE02E9AFA0B7391D80E3D7EBAC131A98
+:10D2F000A15C59CCF557D03FE2DEEBAE2C8EFA1193
+:10D300002A8B75F918278256BA1F18D553C209649B
+:10D310004FC5F4A843FB8CF736BE4DE51281DFC63E
+:10D32000E2C3F5629D77D23E26887D5CBD7D88DABA
+:10D330007B78FB38F54DB4CE74BE4EE67AF9825553
+:10D34000170F434EB3609C17FF05E74CA96D593189
+:10D350007E23EA488FE2B542B9718FC4EFF7F7191F
+:10D36000ED43CE7F2B05BD6F2E3E528FF85BF9AE9D
+:10D370005CAF8DECC5BC681ED311E29FD3C21FE128
+:10D380002E81F6E9B4BE365ABF97AFEF4318BF8B74
+:10D39000C6671C3EB52C6C9B384A9E459FC03FF427
+:10D3A000BB9FFA39F9BA6A430AE9EBC126E068C0C3
+:10D3B00073FD0916D7CFF49562BBECFF15EAEF12A7
+:10D3C00076AC3FFE7DD9DDB1B8C96E6AEFE6F359A0
+:10D3D00041FE23DE02A1E30BF13B10B5E27BE3B596
+:10D3E000652A7D6FA1B6E0D252E107A1F8A68C8331
+:10D3F000973E3099E29B896509DC5E741AFF8E4581
+:10D4000070AD83BE2727BF5B2BF332AA98F1FB7266
+:10D4100071E25B067F8BF48B44BF27674D27FBD6F9
+:10D42000BE5FFCFD27D3F7E312DB18F9B71C5DFCE8
+:10D430001EB8394ED5B0A9F5B542CCFB506D149746
+:10D4400035C733CD7F0F63BE93696372281FE5F93B
+:10D45000E2D4581ECA5B7BB25DC88766FBF9AD910A
+:10D46000ECE73D46FB7950DACFDAF5B19F4F141B5C
+:10D47000EF0FECCF0DFE84F0AC6A74BE1D29295A63
+:10D480008A7E8477441EC5D987262C417F54B88F65
+:10D49000DF573827E2FC32DE7FB690B9DCF8DCE2F9
+:10D4A00020789E5D9712C123784C5773057E5750A4
+:10D4B000DAD10879F47F558A7D9AEDEDC402C0E790
+:10D4C0002C6233B2B3CFBADD1417A8EC11DF97107A
+:10D4D000F902D2CEAE14F7F8D796F17BD5E8B14376
+:10D4E0007A90DF0FAC1476B8B4C7077EC8147D1EDF
+:10D4F000C052E627FAAD01C2C0E772F13DC55A3706
+:10D50000DB828BFACD8CD01FE99CDAC3E9846D579E
+:10D51000E9EF5C9DED7B90CED591EE313884BF81F3
+:10D52000E4D8C40FC5CE7795E8CE8F6B386FC6515F
+:10D530007B95F37117DEFF4D8D7D5742DE9BDF9E9D
+:10D54000C2FD283797703F93F929BF1BF17EE5078D
+:10D55000C8CFAC128447CC9ECF2EB936F9398DFA9C
+:10D5600089EF56A4611C889F4BD34BB85EE01DC366
+:10D5700083B83DF6D1F300724B4689E7B2ABE711B1
+:10D58000CCC3F9CCFD2F0B7DA43937A495F0783F9F
+:10D59000D1AD39DE2FDB9D44FF549CF3F673255C3F
+:10D5A0007E9702895A7286DFE77FBD5D3B833ADE54
+:10D5B000C9F6727A9E52C3C998BFF59AB8CF0F8A3E
+:10D5C00016E533C9BC28396E6D5DE9990BBAF3AC29
+:10D5D00072D1A39467D6E93BF8B202EB3C27F2BDC7
+:10D5E0000693BD74CE858FF3EF4B2DAFB9EDCC050F
+:10D5F000DDF9615E2FE6458581D5379470BFE60B76
+:10D60000A58E81F979F8BD26CE874D7D67E93E4C20
+:10D610007D5B030BCDA0BC2915F17B6A1EFFFE428A
+:10D620006581958575EB1A3B5B5B57C2FD3ECD442A
+:10D63000A7B1BCC0167C5F6AD3C6E0DF9F94FE49E9
+:10D64000192F282DF915C5DD065318CD1FF4B00884
+:10D65000C6DD176AF7D88730EEE2F1927FA4A1C445
+:10D660004BEB6CEC3940EB490C5CA6F594AA00EF4F
+:10D6700071C3E12DF9A25BC05BB76F82F748FC5B19
+:10D68000B9484D46F8BE86F882763D826F8EA997DE
+:10D690005CEE38788FF62B2835C0DBE12937E0AD1A
+:10D6A00053FBDC18DC8FC473A3A87BABC7FA2AE258
+:10D6B000F15DC023233CC6CF83388EF8BA99B17F81
+:10D6C0002FE1DF9993F8AAEFE2DFBDAEEF2AA5EFD5
+:10D6D000C5D517DC664FA33880D28FF725D796358E
+:10D6E00030D4F7ED5A0A7DDF4EE26F6919E04FB78B
+:10D6F0005EE0C77D253ABDF303F8D71F27BC0B3D7D
+:10D70000F8C3F6FFC37C4F97C4D1CBFF52F187E13A
+:10D71000DFF3E1E7EECF84DC303FE5B93B627E33F7
+:10D720005BB2A6E503AC43F20DF26D8782F9938AF2
+:10D730000DE92C88FC8BF7D70A7EB105E3A1CD1E3D
+:10D74000D68F67E16EE423809BBD3CD38EFCD3B8BB
+:10D750002793E802ED7F82A738A75F8E9DD367E904
+:10D760007D0BA78BBF76DC07D6F30EADA74EDC2F63
+:10D77000F888C5A56E2A0F3AE6A37F563B40F2E52E
+:10D78000E83CB7944F19FCBB4DEF2F0E5AA4F1BCE7
+:10D7900031190F8D13FFF42A1F20FE698EAB8E14F2
+:10D7A0000F8D13FF34E8EB23C53F99294E6A8E7F16
+:10D7B0002EEEC9A6F8F3629F85BE532DF57E19F7AC
+:10D7C0007CA5E72995BE8B345D612999C3E3A33B12
+:10D7D000857F8CA156A7DBFFA90CFEFDEBDE34276D
+:10D7E000FDDD55FCC17C2C094F900F4E07CCDBB5FD
+:10D7F00088E76556651E36C3D52EEC926B82AB8CDE
+:10D80000AFDB7B94C866240D0F8BE6FFD97578B625
+:10D81000FBBE437864EA800BBFC7DDE81F4FF964A5
+:10D82000663C14F5F0BF4B59E49E437F9752E2BF2C
+:10D83000C8333C6F5095EB8B9337F817C7A777B376
+:10D84000336B147CCA38F64878BC252FB811F946DA
+:10D850007EBF49BE3F95C1E17B7E1A137FFFD4880E
+:10D860004F80BF46F7FA7DECC06665383D14897C71
+:10D87000CC225FF81ECA834FACF060DC2C0ADFF4C8
+:10D88000EF127C3B5BBDDBD13E3A5E66A37C9538F4
+:10D89000F4407FDFF66AF4300CEF7D1F0C7FAB0A9B
+:10D8A0001F5B9819873E3E305EAF824FBBF5504FED
+:10D8B00081371E9FBED0477CEAB7BA11AF129F12C4
+:10D8C000BFC3F1C9F50B89EF53F9DA37E7E7EBF19D
+:10D8D000AC3D81788EF16F98DB312CFE776F0E8B2B
+:10D8E0007C1618E749ECF7D4FCE8384FE1B8D59F2F
+:10D8F00088FFF74E0E9772B95BC7FA5F9C8876DF98
+:10D900000526F235FD2F7BD14FD3961D375FF3E40B
+:10D91000FD0AFF3B3D1E76C022CE578BCEDE3D8BEF
+:10D92000799B60DF9EC6BC4D78FE707E26EDB717F2
+:10D93000F337C7823E2EF23BEB706C9C07F4598C98
+:10D94000CB3335C4F05EFA207E9F65167E9FA5839B
+:10D95000E46E2C0FE31D531E062F5705A4BC714522
+:10D9600028EF261AFFF4840CF14F363362947705C2
+:10D970002143FC53E4E948F9B6595B100A1BE29FC6
+:10D98000E534FE993AD97E47A474BA3EFE591DD1BA
+:10D99000F4F1CDF01D54AE8B968354967EE8C70605
+:10D9A0001E08A11FDA3733F44BC493BC370F02486B
+:10D9B000C3BF436775B90FA21D0EF601D3F247D658
+:10D9C000AB3F2ACFFF0F526BA57D00800000000007
+:10D9D0001F8B080000000000000BE53C0D7454D5BF
+:10D9E00099F7CD7BF39364422621E200415F02E880
+:10D9F000D442187E020109BCF94932B62003048DD5
+:10DA000005E903722C746D1B6CA9B4AB9B81C4989F
+:10DA10000485D0B2DB9F6DB72342CFB1DAB371EB8F
+:10DA2000A944A41DA4555A2AC6363962976AA0296A
+:10DA3000075ADBA295D5EEE929FB7DDFBD77E6CD60
+:10DA4000CB84A0D03DF674389E97FBEE77EFFDBEF9
+:10DA5000EF7EFFF73E972F54185BC0E0E74D1A1A90
+:10DA6000630361F87302B6FDA651C6D8AAC9B25DB8
+:10DA70009934A631B6B840B6AB4D6321631D2E264E
+:10DA8000C6B30403F8579893DADB8DB09998C2585F
+:10DA900068B92AE06334FF6B6B24FCAE6408E65B74
+:10DAA000ED10EDC4CAA4E165EC634CB697527B4D12
+:10DAB000BA1DA7F69D8CAFBF3FF5B09980F1DF99F5
+:10DAC000139F605C03EFA23D7A7CFADF1FFEA7156F
+:10DAD00089CF6413FB3FE8F802BF6346154ECFF9C8
+:10DAE000FD7780EF5A928F031CDF0F207EF7103FE7
+:10DAF0009FE0F87D00F069237C7A009FC2BFFD7A29
+:10DB00002F5419BB71BDBF011DDFA47D9FC6E9B8AD
+:10DB10000CF84789EE20DF077BFF84908F31EC9F64
+:10DB2000C3E77BD529E428D164A2DC9F725AF60DA5
+:10DB3000DA0BFAE57A5BF49066C57F0BE9C9EA1265
+:10DB40003EFE77A97BCD4459A60D3F03F75D8EFFBE
+:10DB50003DF6678DFF3C8DEF72A6E1693D97E85772
+:10DB60000E6F237C33F42608BECF06DF28E82B3A5D
+:10DB7000DC914C58F8C1120F127FD27629F130D9BE
+:10DB8000A501976CEF20BDD959CEE71F7FF8E1249E
+:10DB9000E20FFC3B46FC9EC2F9F78FCE8F3F184246
+:10DBA0005E029C1F520EBF33C7F823CAD9070D5F10
+:10DBB000D83F35744D46FEFF1FD62BA6F5843EBDDB
+:10DBC000D7F1697D147E9F2D49F3776208DE8F0FB0
+:10DBD000EBD45FBDF1C9C8B5F0E79AE6475413E747
+:10DBE000051856CA587C9025B7C39A37B3A4CAC043
+:10DBF00087C58326F34DB3E835FB0AE1E1F23A44E9
+:10DC0000FB5B64FF562F92727D2289F145066FEF10
+:10DC10003ADCA734DEEC9B59782F3CEC7D44D01DD8
+:10DC20000C59F4E46ACFEF0F035F2CF150BA2DF8D2
+:10DC3000B3FAD35F9B847C585D21E7FD7612E779C8
+:10DC4000B558CEFB24ADBB3ABDCE0F783B5FC2FFCB
+:10DC500094E033780D985978257E417197C4EBB1E3
+:10DC6000C303B45F2E5FF2817173E0D9A40413B0D3
+:10DC70001F1FDBB84D35AD7681F5E821F06F77B029
+:10DC8000749BE42A63077A68DDAB8DD7E690E08F5A
+:10DC9000D0D3349E832C986056FC0EF0FDB9CAEBAD
+:10DCA0005BECC23D28B7579FEF29E7B516BE4B3D49
+:10DCB00058E34BEBB7C13CC0775DCEF36373A3F77A
+:10DCC000CAD705397FD86A4FAE9C8EBE5AA2E30DE3
+:10DCD000BE2F19FBF392996D7F2E1BBF4742167F13
+:10DCE000FE9EC787B2F5CC627F1E47BA5BBD252E6C
+:10DCF00094EF757E662401BF8BF85B9C798E0F2BA9
+:10DD0000649FD2FA59CDC7AFDCC59A7BA60D87BFF9
+:10DD100036EC20B8D667D8C61E982FE43ADF14B781
+:10DD2000C0A542BCFF5048A127D07788F8BF95E333
+:10DD3000772CA4D37A21A6310374AA61E5A4329486
+:10DD400083D65FF2F9983FC8561466E63B2BE693FC
+:10DD5000EB1C5E5ED868A5E327629D63214E07FA3F
+:10DD60007FE2E77D9C0EB5E86E3FCEAF16C8FCF2B1
+:10DD700077C4D776A76827DE22BF3690B6437F24C4
+:10DD8000795FE59672F90EE9BF8CD7DF0AFD6F3235
+:10DD9000B110F167CC31CB3AEE0F6407471B37283F
+:10DDA000FD459BD8AF447ABF4E21DEA38D57234A51
+:10DDB00033F1C9C3520AF80FD5EBDBDB05A4042A03
+:10DDC0008D7338FEE84CE3B797330FF0E93CEDCBA9
+:10DDD000E7B2F3114BFFDBA1AC7CE0FCDD719C07EB
+:10DDE0005676C3BEBDB2462D5D0F7CFB2BEE4F15A4
+:10DDF000E507B15CF2F5D7CCBEFC359415CF470AE8
+:10DE0000AB408FD8784770AA3E7C9C37AC4839131A
+:10DE1000FBA43D8274B4A7F58DB77716F3FEBCE77B
+:10DE20009CEB843E1584719DA7047F99AF14D76342
+:10DE3000D38EA6D4B9E05F59FA6738A0BD1EFF8221
+:10DE4000F50722A79C28076B3B14239943EE87E92B
+:10DE5000498798FFA1F4FE8D0F5F43F39A6CAEF0F3
+:10DE60001FF01BF8C4369AB7B14921FDB3EBCBE4E0
+:10DE700030E7DFE4709A4F93097F43C8EF9CF85472
+:10DE80006C032873CFCACCBF56E01D72C60F5D0B62
+:10DE900072D0DEA6E8688FD66D5DD7510E6DA639BB
+:10DEA0008353E17103720AC6B5FB2BBC68075E148D
+:10DEB000EBE17C2ED847F425FE1282631A3CE7C6BC
+:10DEC000361FC1E1EF4E37AB909EEAF8EE0892B5EF
+:10DED000A0F1C923F8BC15CC34C629DB167D3D1E44
+:10DEE00086FDEB9BEF0CA2A84174D63705F06A10B3
+:10DEF000786946FD393606B228170BA6E6A05FF70B
+:10DF000006B7C3FB86A64F2C61950013770E0D7ADA
+:10DF10009018935DACC079B5A1C100E7D945B07147
+:10DF2000CBB73A336DC40DFB3D99FE95D773FBB467
+:10DF30003A0CFCB4C8DD0F057D3F14FCDC0538F459
+:10DF40004DA3090A19EA0DDBE840FEAD1373F5B5E0
+:10DF5000ADFCC88700BF0B0116C4B61BE95333F4F0
+:10DF60009D9AA471FA98E15D3A0ED615FB7ABC052C
+:10DF70006CDD8D306D1BD009F468EA9AA294458E51
+:10DF80008F8F315910E3B640E20106721231773BB0
+:10DF900007018FEB9BDEDC8871DF5AD3ADD7038A94
+:10DFA000776CF4D5625CBBD2147C59E23C8D747BF7
+:10DFB000E01FF2C5953AF76317F279A1C2C6C3FC18
+:10DFC000CBA2BC5FF2C5CDB4D356BE68B6F6D6932D
+:10DFD000E53B7F6481FF4CB8B0F4CC87E18FD96C0E
+:10DFE000F645A0130CC852C4E74287E253CB09CCD4
+:10DFF000C1804E9787EFE3FE8ECD2FA29EAEF56BCC
+:10E0000041878EF831E25FA358E39D167DE78F20AC
+:10E01000568D6CDDDD8D727747BFCADC00D7BE66DA
+:10E020003FCE843F0FCEA709B970147CA34F0338AD
+:10E03000ED8B2AC3F5241F81DFBEB9F0FEF4008CFE
+:10E0400007D03BAA814FB0EEAD865BD7012E7FE1B2
+:10E050009B6DC8A77CD69C1A0BEDDBFC0E96F26478
+:10E06000E802BA13822F8E8B0AADA56B725D4756FC
+:10E070003FF125FF0B11C6D076278CBE2900B75C77
+:10E08000CA6D07DFCFE506DF0FB9AF2CCAE555EE45
+:10E090004BBE4D5EDDD5CE8C7CE69057FB3E246DAD
+:10E0A000FBB05FE37A72AA5FA5F8E8D49ED25BABBF
+:10E0B000811F893D0ED263C8D30E2845F0474A61BF
+:10E0C0001AF0FF76812FFD006E7F7371B2AB3CB307
+:10E0D0001FB7079EFFB352C938D4B88C3D6298C4AD
+:10E0E00042FB36D1BAFDAB8912D4D38FB11E27EAD9
+:10E0F000F59D6CD089F2FF714C0555B48F4117BE68
+:10E100006FF4F85CC8C7FD7B9E2B443B929AE02CD1
+:10E110003E13205561563B697F2227CE48BA01380D
+:10E1200025EDA7C7F4935DF6C293ECB4C1B05D5C76
+:10E130001BF59839FCC8E1D9E60B6807655BF33538
+:10E1400033C4E35BB3E33F217B29C6EB95C64FB1F4
+:10E15000FDBD59C6317C7E1BE33DF00FE7C3F7518F
+:10E160005EF2EE74E338DA35BB1D3B8D764CCFC8DA
+:10E17000C30A9B3C483B7602ED1874AD407D05BE5A
+:10E18000B1D895D9B153520E6E6237217F809E5F10
+:10E19000931FD1801EE0CB6BB8EF331856DF52AC23
+:10E1A00084C8D47D809F22F0C3F70AD87765EB0B33
+:10E1B0007F56C6F0F6028053C4BE621A598B7EE3C6
+:10E1C0003F821ECF64B417E609A4DBCE1770CC4E95
+:10E1D000CACBFCCF9F40B971143C3BC9CCE107D3FB
+:10E1E000FB7AB7F38D345DA84710C9231D0A331D90
+:10E1F00017911E1F2031FE5272912039685FAA10BC
+:10E200007DEDE5AC11ED791B76CD07795FAAF4A021
+:10E21000BC3F1E29E1F1D2141E17761527FD415E81
+:10E220006721781608B295D333F33E1E5109FEA636
+:10E230003946013A2E88FB285E92F1AA84F345788C
+:10E240005C3936C2E38C4065BC841C5D6990F80E75
+:10E2500071D4586A7B5349C7385117E13FDD618952
+:10E260002306262619C621F946EEB8E1BA48DAAFE8
+:10E270005F17413AF648BF6E5C8FEDC5637D0D6850
+:10E28000E75C80F7DEF28CBFFEFED2FB5558967D30
+:10E2900038524EF85537ED6E1D07FB1D0A4DF662DC
+:10E2A000D894AA49FA318EE81A0F7CC8A12F5B23B3
+:10E2B000DC0FCEB94EC0097E49BFEF81F0DB09EB20
+:10E2C000609AEFC038A08CC70177462A689C8C07FB
+:10E2D000003EE102B8D00D26CDD33E35F77A770A5D
+:10E2E0007E66FC6DB008ED3563CDE42FE2C29FBCC5
+:10E2F000D262BC36044239D012A327D8FFBE2818F8
+:10E30000B8135AA23098837FCB6AF779D06FB706DB
+:10E31000D67B0631FE3322346FE39AD06B43167BF3
+:10E32000DB55C626611C705BC32DAF0D59F4ADAF34
+:10E3300090E38B7E26E1CECCBB0AE504F03D127261
+:10E34000A7160343F3FD2CE956E8E9D4510F223A0E
+:10E35000F5C78D75CCC47CBCFA9446F5AF62968641
+:10E36000DF065B13093027E215F727198ECB8736B6
+:10E37000C2C717BE49F0CBAA5596B0E009F6672D83
+:10E38000C9812D5EDA850206F3B6CF5792DB61DED6
+:10E3900006FF5DE47FB62DCAA7F7B06ED20DEF6F12
+:10E3A0009DDA447E4BC657EDD16890FCD315C65319
+:10E3B0008767C7EF41BC5CFEB45DFD1CC97FC6AE7C
+:10E3C0006E8970BBFA797C2FEDC7DE23AF90FD809C
+:10E3D0001C84F8DC05FCFEAF1CFBB84DE84157314E
+:10E3E00097437BFFD784BCBE3B3DDE8AF31BE0D363
+:10E3F000FCB3DE7FBCD92EE34DC1C72BE50FF0E3A4
+:10E40000DF2216BB0CFCF84AA46A381FE0D786F658
+:10E410004295D6E2094543F9CF13CD479899C47187
+:10E420001ED64C40AA37CED0DF0D9F27C570DC6AC0
+:10E4300041DF7BB5C7FF09E10DB76BC61311CA0BEE
+:10E44000B93C4BBB0C7AC9FDEFFBB4DBFD0EB0A7AA
+:10E45000804F07BE9A9FE93F24F6B9B7CA3C84EBC8
+:10E46000DE50E65987FC7F5031FC5E15EB9E66233B
+:10E47000DA11A6CFCA1A377C9D6D34CF4085B91109
+:10E48000F59AE92B4681DF2ED6D5B9BFD0391DB01C
+:10E49000EE57F32767DAA3D1F5FD88F173C4BBD536
+:10E4A0008CFF0AF5EEA580434F28F4243DECAACE5C
+:10E4B0004B2AD02E9865BECAF711EC284CDD157892
+:10E4C0008BE2A2654B148AD396792083CB6127CF48
+:10E4D000087FB34CE7FDECA4E1B7D63B8AA38EECF2
+:10E4E000BC1744C2B0D62FA28EF5589797FE0CEBFE
+:10E4F00026B9F4EDBCD027D5FD6619DAD5979CB9BD
+:10E50000EDF65B1117C12951519710FE6F959BE7EE
+:10E5100057EC67809FC5BFF65685FF47D8AF84622A
+:10E52000F18B0313CF93BDA31ECBFB65A2EEC4FA00
+:10E53000B3E79174964459D6BA20AF8E28AF63A83A
+:10E54000514BFF2A95F1BA475F36BF001F4F94E247
+:10E550003F3634023EFB72E273221B9F9228DF9704
+:10E56000DE2AA304E703FF3C16D7EF0883FCE5E0AF
+:10E57000EF1333C2D762BFC6121D15E5978C5BAF90
+:10E580004338D9B6C4AD7A34DBBE9647B97DAD8881
+:10E59000927DCDBD6EA5E0DB95DA87F7ABF73B6CDE
+:10E5A000FA2E9F5D834F1554021E6E77E2B3A4AF1F
+:10E5B000D32E4FBF3F7E5DDF44A4F390904FB4ED68
+:10E5C000186F183A8F473E1DE5721CBA214970CF6B
+:10E5D0008C107FA4E1803158971B290E99FF3EE3F0
+:10E5E00090AE850305384FEBDB7B0B308F7F6628C1
+:10E5F0009C330E3954D64D78DAE390DE11E290BBAD
+:10E60000A23C5E3DF21B17C5153567B99FAF39DBDC
+:10E61000ADEA209F7747B9DD9E3FD4A79A202735E2
+:10E620001887C03CBD220E41F86D20BA91B7BB558A
+:10E63000C46BFED93E1A57036D8C43E68F108700DA
+:10E64000162ACADD819AAE5FE0BED9E97DA1D2DC8F
+:10E6500012B5E45BD5837D744E22C77505B6179855
+:10E66000B4CFD972737836B7BF99715CDEED702381
+:10E67000C957ADEA0D607DA093E507910FEFE48DDA
+:10E68000A964453CAFC1B8B8134181EECE9305C92A
+:10E6900004E6D51EDE7F6FFE98BDF894F6C723F41E
+:10E6A000E29DBCEB92220F328A60FCBDAA915A0C0B
+:10E6B000FEA073CA977C9C9ECDA4475B046FC2BB2F
+:10E6C00035CAA76FF6F37D90F1D78BAB148A0F6133
+:10E6D0009A254B017E9E98DF3587E78775AA97E0DC
+:10E6E0007604781C7973E23CD52FE60FBA741DDAF4
+:10E6F000F306EFE2F9A2FAECD1028CF73FAC311548
+:10E70000DEAF6A8BB7927C9E74513DC3807FA89F19
+:10E7100055FD3DC4B7822157569D231F2C59CA125F
+:10E72000B7B86C6DA6AE29CA6587E4D35E87783228
+:10E730002AF2CF4A36E322F0E502BBAF0369734FFA
+:10E740000D1F79940D1F2FEB0B9B66184FA37C4C6C
+:10E75000710E7EF769E057EF1B2EAA5BF4EED9F33A
+:10E76000D14AA02FD1AD515D57E6334059C972CC83
+:10E7700067910754973EBE1EE5F260A16C8341038A
+:10E78000BC0FA6CFEB37AD372CED63D1074EA3DF1F
+:10E790003B788D843FC7C7CB7662703DDED7383873
+:10E7A0009EB72F44D54713B4BF831AE5D15B7FEDE5
+:10E7B000CD651F8FD772FD92ED5BAB3773791D6509
+:10E7C0001CD8F557ADFA21C7E52D35774C077E1CCF
+:10E7D0001C72D0F910E459298C0F36CD305F47F800
+:10E7E000074F70BE1E7CE31E1FEE937BECE0E772CA
+:10E7F000D9F9DF0B7F94CEF36672FB016E4E43BFF7
+:10E80000B56BD133C72A619DE3F3A7CE528104E0F3
+:10E810008507E36539DE5D5B91A587B756BFACAE72
+:10E8200047FBF3C6E9865CFA5E1535FF944D0F3F52
+:10E83000176DEDD688FF25CFD7EFC57B3FA99AEEA0
+:10E840003E0DF6B7F7F70E86794AEF7491878F84FD
+:10E850005710F02AB92CBCF6CCCB216F8097ABF6C1
+:10E860009AE178BD54CB883F2F541A9EDAAAE178FA
+:10E870003251C75C20EC7DDEB92F51DDB177D0413C
+:10E88000C5930B437B55143D59FFEE3A518111104E
+:10E890005BBCE4948A2265DEA766E9DDBC13F95906
+:10E8A000ED3B9BC766B5576F9C98D143F86F457495
+:10E8B0007256DBEDBF29AB1D62B3B3DA0D4B6ECEE2
+:10E8C0009AAFD617C96AD7FB3F9A057F8BBE32AB8A
+:10E8D000FDD1C0EA2CF8A5C10D59FD35BEDD0F6094
+:10E8E000F9283E6DA63696913CCE44BE16F41B2404
+:10E8F0008F0F9EB8C7877291AA894F42791B28EC67
+:10E900002BC3FAF58BCEDCF9DA7DB5AAF4DF65E826
+:10E91000EF0DC6F335091FAA18CCAACB6FA8E5FEE8
+:10E92000796DAD92B34E60F7C7D20F4BBF6C5FDF0E
+:10E93000EE77EDFE76D987F67A78BD9FFBFD5542DE
+:10E940000E5A033FF762BEFE6203AF237495C5A95A
+:10E950006E3020FCF39155B74FC273B5FC8039D6A9
+:10E960005D9EF1D7914092FD1AEB3CBE249B3C1D6D
+:10E97000FB936CC374AA4B6B9169FCFD0DE2FD5DCA
+:10E98000F8043F5D67E19BDDFF863C337F5CC4326A
+:10E99000F14AC3BB46B408F0FB48D3935A293C2341
+:10E9A000DEC39AD50E1DAFF96DE9087EFA93B53630
+:10E9B0007DC271BD432B2EE9075E6FE175F7EFB79E
+:10E9C00078580AE83BD9E2A3E72F5BFCF4FEE51692
+:10E9D0009D9EED2D017AA65A82D4FF8B966A7AFE0F
+:10E9E000A8C5A0E7F32D317A1E6D8913DC4F5B1AA1
+:10E9F000E9F9B31693DEEF147AFA41C1C708C8BA31
+:10EA000042FC884321BE36E055DD05670DD56AE737
+:10EA100081AFFF9A8BAFEFD79FA46A7A26A29C8121
+:10EA2000BFCAA94F3DB532AE4FEF37E125E361CC08
+:10EA30005F504E649D0EF07B0CF173637DAEE4CAB3
+:10EA4000F13BA870BC0E16F3FA0DCEB3BC10EDF975
+:10EA5000D7E361B2E7D7CC247BEE675AB63D2F1FD0
+:10EA600066CFD791DEB1A35827C5FA229D53D8EAC5
+:10EA70002045753A8D93759045EFF23AC868F403D6
+:10EA8000DD47D16E49BB7DB974DBE93D3CDB7809DC
+:10EA9000E791FE7998FF30EF26FF512D7496696F4C
+:10EAA000539C5820E8D9757A4511DA173722C8F3F4
+:10EAB000748355E33E33791F60EFC6B2E1F3BE5E67
+:10EAC000D343FE7C473ACE7993E298E1FE2B9B0F2D
+:10EAD000180B59FD3BF0E15CB65FE47CA8559F1D27
+:10EAE000DC0EFEF9E020E375B239FCBC4EFAC183BE
+:10EAF00067791DE382A624196C5D983577CF83E78B
+:10EB000081FB59691CCF9B263982FB01B4E0B95EB9
+:10EB1000DD0370A141736C1EF457A7F2685C78C9DD
+:10EB2000CC24B61BE26F927D0A6BD97E1223D4B43B
+:10EB3000DFA1225889AD3D2103AFE2FE5664DA30F1
+:10EB4000EF27669B5A1DD0B5E27C33D3617E7719DF
+:10EB500073D2FD90E1FEFD6EC55267D358B003E954
+:10EB6000D0BEB0839FEBD9E44DF249D6DB641EFEE4
+:10EB700008337C7539E2873671EE623F6F796BBA84
+:10EB8000E94778C5F73C9DB7B08D8CDF8F70407E2C
+:10EB900082FC1BE34AEE2F1F2E77DF9B75CBA43A36
+:10EBA000AA532494AB93B7772B94B78BBC89E99F76
+:10EBB0007158F3189937D9F3A387849DDD897616A8
+:10EBC0009E0F3919E55BED4A7E70AF92C997C06F11
+:10EBD000CE40BA16D589F317D63C8F9FD3DD9F95CB
+:10EBE0002F8D88B7C84B9CE97D2FF39D29C8ECBBBE
+:10EBF000D7D5EDC77B8E9D33BFD1B81EF936D34331
+:10EC0000E79C4C4BE96877ECF4305F8295CECDEC15
+:10EC1000B7CAB433589FED806006CF7B1FC62F0163
+:10EC200060BEC2A0232BEE29AACE8EDB6EAF9376F8
+:10EC3000F6EAD0810240E7DB124F1617E7993CFE57
+:10EC4000F488F76D3AB7170CED9DE57CBDCD6B7878
+:10EC50007C96FD7F10F7C73D323E6A799B0FEBE053
+:10EC6000DD5E07E97787AE759643BBC3ABF1F84627
+:10EC700077C4729D43EDAA5304DD1C2F9FC04B0D3A
+:10EC8000ADA03868A4F5BA84BCC876FE34D3207D24
+:10EC9000D48371CC935BBDA50AD64765FFA63A45E0
+:10ECA000C84B37F1A153C455F9819E9403E56CFC20
+:10ECB0005DB3916D1E8893CEC07BCFB41E8AABBC72
+:10ECC000135C662EBCBF2CE6EB74066394F7173A10
+:10ECD00018E6FD9DE5B9FDE83FD7F138B3559F151E
+:10ECE00047F804F065AA321CEE53420E1E70821CD7
+:10ECF000C2FA9D536FA37B629D9318D9EF8AFAE9FC
+:10ED00008F6EF3E69043FD33B47F4E1F93E7EF59C8
+:10ED1000F7255AF586C675B0AEF6320BA2CDB0EB2C
+:10ED20009B73FC8AC67578DFA23A3F88F0B5EACFBC
+:10ED300012C8C7F620A37A8756DCE441BC1F2CD347
+:10ED4000E87E449AAF33CCC7D07E8C26DF767C60D9
+:10ED50003D92BB91F6D78E1F85F2B32E015F6C36C4
+:10ED6000C673CCF7CBB45E65CB977314F91A8D9E3E
+:10ED70002CFF5A96F1AF3FA9DBBC01EFA93DCC783F
+:10ED8000FFB1BA30E5FBF6F6D5D2F356ADBB11F7BD
+:10ED9000A5758A8BE4CF3EBEB39CE3D5F57C8D5838
+:10EDA000D7A7A0FCEFAC2EC943FBEE45436DE16B4A
+:10EDB000AAD23C5567F1DFC5D1661EB7D731925F45
+:10EDC000AF1EF74D01B9F0F6AB2053C077C75FDE39
+:10EDD0003DA5BF7F3EB26E83E4964C3B975BF61732
+:10EDE000E04B9110EB31ECA13E7E5F640BC1497E9C
+:10EDF000EDBAFE0FC1D425F8366661767DEABDD640
+:10EE00009F94FAC252E2731ECB433E5F60F729E43F
+:10EE1000BFA306E99D2F6D57F9BD9552D90472B075
+:10EE20004D22A764EA520CCF3D50BF4C46F10D4134
+:10EE30008E13475E44B78FC64D14D34CC00B352A92
+:10EE4000CA3FB7BB17D81B7C7D1886F756948483BE
+:10EE5000FCECF528D70057CECC3F9FCA719F679234
+:10EE6000AFE9C90DF09C582FEA69829ED1F821F1D3
+:10EE7000FE5BC9AD8C0FEC755459677D1AEBACCABB
+:10EE8000E87554A69D27BEC9F8D75E5705BF5680C2
+:10EE90007C7FE7068D7511DF79BC90C9F34D8FF546
+:10EEA000FE9DF497EDBE1559F5F97923D0FBD428D2
+:10EEB0007EB1AB1FEC26C6D1FEED549F3F7072FDB4
+:10EEC00051CCE32FF85D3AB3D8FFF6C2ECF3033927
+:10EED000EFF67A51871F5FC770BCD66732BCB7E7C1
+:10EEE000F207C92FB42AB9CF1DBAEA1DE2BCD1E698
+:10EEF000276CE733FF9DE74DBA2A58DA7FA8C23E58
+:10EF00004BFFCA34F0A2E3ACE3B91D95FC3820E214
+:10EF1000D1AEE736D13D03E6B7D47D2B72AC6F8F0F
+:10EF20001B0D43F7CDCDC4B1CA208F5FE5FAED22AA
+:10EF3000EF6E3DC9F7235FDC37B2D30BF1EF17EB70
+:10EF400081DE8280C356DFCAB637F678D8ED618994
+:10EF50007C8BFD8378B8A59EE284EC7876428CF1B8
+:10EF60007B41C526C3FA4FC46FAA58AF99DBDFAC0B
+:10EF700032A07BDEC94BEF47633D8F17DA03EBE32B
+:10EF80009837C9FAF3AE451F21FB0A7EB4BBDE6297
+:10EF900077E57D87F75A8F92F23A57EC637A7DFBDB
+:10EFA000BD94855BF8B9D1C97B8EA13C1E00794424
+:10EFB0003FDF5E98D8311DE3939755B65F1F5EBF64
+:10EFC000B2D325EB506363FCDE8ACBDF7E64B1C332
+:10EFD000C29FC1665527FE180CCF8934714E64AFAD
+:10EFE0003BB9DD4633FAEF548DD168AD3B4BBE35AE
+:10EFF0000A797EBDA699CEB19E1EE1DC58C2E1E73A
+:10F00000659887CB3A56D90CF359E4EFDCD86615EE
+:10F01000CD48757C33DDBF2CF81746F923CB5792CA
+:10F02000FB61A9E7163D43F9E59FFC8CEA6C2ECC09
+:10F030002F4B319FE4F9A5CC5BA59DA8559FE8A86F
+:10F04000C07B1DFD1ADDD32B786E9307E3DE50FFE6
+:10F0500006CAF10C655501EEA3BCB724F1BCD2FC85
+:10F06000B40AF353CBF94AC66EC47E8572D0D5126A
+:10F07000FF5514E4A3B7C5A0767B4B233DABB4A4E6
+:10F0800081F4540528E3630B86A0DF8247555F2C8B
+:10F09000ABDD5569FE86EB553CEBBDDB0FF359E468
+:10F0A00002F2E3730837F724E7A76B8942F711965A
+:10F0B0000DB207B86EFFC3D8A182D8D5B143BED870
+:10F0C00025ED103F67750D8A73569BBE3D5EAF936D
+:10F0D0001EA4F50ECF5BC9CF25683C9D19CE077ADB
+:10F0E000C67C92DBADCCBD0EFA9E3124BEB3BEF120
+:10F0F00068CD3E8C67DB5F95FDCBF719967E9688D1
+:10F100003661EDEF3026C71067761E2D6DA2EFB089
+:10F11000C5773491C6E2B20196B9EF68E7D74331BB
+:10F1200047D67D9A10E3F534D9BF3926F24320073C
+:10F13000EB76F2BE443EDE97C811BFFF9398EF5EB8
+:10F14000E453157E1FC2EF2B2CB67D1F62C42EFD2B
+:10F150007D4842F48FF63DC81D319E5F98623DFCAC
+:10F16000FE3F86F8C6F97718EBC57E2DE84FB68EC0
+:10F17000C120D1CF72CE138F713FFF428CDF7771E8
+:10F18000F90D0DF705E65B4172D0C8EF67CAFE05C1
+:10F1900067D3FDB7D17A0DBC7FC15993EA48F2BB62
+:10F1A000BC78ECC67DDBB4CCBD9C76AC4778F1FB7B
+:10F1B000147EDFE9DF059DF6A7FC3EE5369FB8DF4C
+:10F1C000C326EFC3DA66ABC1BFC7BC2576D35042B6
+:10F1D000A3F5EFA2F5C5F738D5825E78BF89DEDBEF
+:10F1E000FEBF024DB1B27DE23B9E4F115DCD1CEFE3
+:10F1F000F4FF2721319BE44BC257C7663509F8CF8E
+:10F2000012FC460E9F431E843C56119E9731DFFD33
+:10F2100084DF1A8EDF87627AD6F75F526E016E3B0B
+:10F22000C189EF83FAE31B3C68CFD3DFFD27A6ED4E
+:10F2300033A65C169F76D03CA65C8FF3497573BDF0
+:10F2400090F22FE5E1BB621F66C61429575FA6F155
+:10F250004D578DFE6F123F6DDF238D4647A032BEA6
+:10F260008FF0F0A7EF23EF8FE5D6CFF7848FFC7EEA
+:10F27000CCAE17CF0AFA61DDEFD13A6541BA9704F7
+:10F28000EB3E7535D685797F407CF0A4E7FD21B54E
+:10F29000AF705E56567A59F74AFE0FED913B6F609C
+:10F2A00046000000000000001F8B08000000000066
+:10F2B000000B93E46660F8510FC181486C62F11A4B
+:10F2C0007606866816068699AC0C0C15402CC74944
+:10F2D0009AFEE540FD8B80782E10CF00E2C940DC1D
+:10F2E00007C49D40DC02C49240F34480981F88B953
+:10F2F000809815881980F8370703C3370E8439378B
+:10F3000080620F48B41B84AD7810EC3340FF6F046B
+:10F31000E2AB6484C3281E1E389D9F81A15A00C1A0
+:10F3200017104495CFE047B0B94429B34B1AA81F32
+:10F3300000656D40B4800300000000000000000084
+:10F340001F8B080000000000000BE57D0B7854D5F2
+:10F35000B5F03A8F79666672124298842027103091
+:10F36000680A4380088AF51022624BED48A9622F93
+:10F37000B5038D80104854ACDC4ABF0C4C8020286B
+:10F38000415141910E0816156D44AC58D13B20B542
+:10F39000B4B56D6CB9D55AED0DB5AD2F0C8852FDD5
+:10F3A000FBEBE5EEB5F63E9973CECC24E0EBB7F778
+:10F3B0000F9FEEECB35F6BAFD75E7BEDB577DCB242
+:10F3C0000B0A07029CC49F0B006E7103C098743A2D
+:10F3D000F2C66FCC7F6834FBFDFFBA23DBF5743DCA
+:10F3E000331D0812D50330008A012EF0B25F59BDDB
+:10F3F000893F3FF2A7114500FB40010FFB945227C4
+:10F40000F6F91AEB67DF8710C172F9E781B2CE0017
+:10F41000B68B53BB2F036F972AD7CBB42ACC808CE3
+:10F42000DF0D2FFDCEFA19BCA989B53FF14180DA75
+:10F430003BE13053F850869468737210F6ABBED738
+:10F440005929F2E5C00607016F1D404D1ADE03AFD2
+:10F45000BC46F0EE5719BC7A96F1BD0CFEA234FC06
+:10F46000FBE01BF950C5E1376AD2F09F2E3C34FF18
+:10F47000BE002B9BF5272B5C003737C39315430049
+:10F4800056377B29BFBC59A37CA2394CF9952A6B0E
+:10F49000C2F0B0721B24E3AC7D6834AB6FF6C7FEDC
+:10F4A0000B54796D7977116BEF4DE7D540D896F70E
+:10F4B00096E9B63C03E75098CDFB2C319FE5CD0C87
+:10F4C000071E1CDF0BC69958FE6DC28B4FE02D1135
+:10F4D0001C7AF9208697D6E715466900976E4C4747
+:10F4E000F82A026E3DC958E3ACC0EC29309C8D1B54
+:10F4F0008A01B07A89DB016E65700F0B4C7A03428A
+:10F5000000F7B1FE5B59FF4AA8F5450F2B5F55EE9A
+:10F51000D615C4CB0EF52F9D6C0C2FFB87783B7353
+:10F5200003CFA7E7C5F296790E034B396BFFCB8269
+:10F530003B5E94181C890AB7EE91D2E374D3A59769
+:10F54000FE87B4D9F3CEFE2B74A316F9D4EC77085A
+:10F55000449769812F6EBF6731DCF6294CF76B8EBB
+:10F56000D36BBF8CFC51D676C80648A6CA33C7A950
+:10F57000D02393E3ACBC62830AC972FEBD88C94341
+:10F5800005FF155696D5FA635599F080759C41692B
+:10F59000BA54E8EE9932E38B8A8ACBE64B8C6FA0A3
+:10F5A000CD42E7419C41515ED6366BC48F37375709
+:10F5B00052BAAD596B27F9F94899DE5E9529877FD4
+:10F5C000453DC5DADDE202E2C3F876486E97B0BF8A
+:10F5D000E8F4992CBF666471F54D3AE6A7CBA817FD
+:10F5E0004CFE5E23E9C4DF71C6DFA8FF9CF271B355
+:10F5F000CBF80AF6B76AA42C2D433C57707EAF7047
+:10F60000A5BC83B1DFB64123E3D84FE4779D58AF63
+:10F6100062C8505D61E30EABE0FCFFCB31777851FF
+:10F620000F76CF7F71717BC528807C071F68A7C8C4
+:10F6300007DAF89EF9C01CE7D39687CF8EBFDA7A37
+:10F64000E4AF35915BDF40BDB1AD82EB0D275C25AA
+:10F650000353E1682093DF2A2A189F219D223DF35E
+:10F660009933BDBD3909AF321EBAAD394C7CB7AE46
+:10F6700059A774B5E04317F25409CB0B3E84A2D1CD
+:10F6800094CFB95EC1525A8FFA4E4B428CC1791B4E
+:10F69000F2E7B9F87DB96194B1E695661E5232D3AE
+:10F6A000FDEBB0BC94F20694217F9AE58FC40DD691
+:10F6B000BE50D49F243D124F3024DDE6E3F9C952F9
+:10F6C00097112FB3B65F6D18E3D3F5593E555B61C3
+:10F6D000ED8FF55F6585E719AA6FF6572F1D36E2A6
+:10F6E0002CBFCEC7FB6B955EFC5CFABF496A0BE38F
+:10F6F00042B3CAD1CF4D663EDE661855E971CA974E
+:10F700003E6CC4ADE5F0B0ADBC66695B3CCEF07656
+:10F710002744074B8CBE2553A26160F4F7459371D3
+:10F720005C6AD3F0717CA7E77707C1EBAFE0E555E2
+:10F73000D2EF8D84853E13A4DFC4117ED3BE510465
+:10F74000BFCA3F2FBBEE39C6AF4ABE3B4276461119
+:10F75000CB8C63E34D8B81CEE090C331407DA084A0
+:10F76000D5BF5BE5C0E43F06E75882B32E3A3D07BC
+:10F770009C712B9C261CBDC16DC2919B4FF9F84E0C
+:10F780007EAABD64EC6FC73316F775B82268E7F53B
+:10F79000413C313D001FDE66B8D8F73E5319EE7587
+:10F7A000A2DB74189CD96FD19452485AD6F14F9B62
+:10F7B000AE83313F86F0F61D694C9ABE2C3FD38A4A
+:10F7C000C7B1A29E93FFCCF9B933E6F75DDBFC40ED
+:10F7D0006D0B4783BDCF6F9D2F323D1AC8ACF74BE1
+:10F7E00089DBD1B593C67E1DF878E061FAAB00C71E
+:10F7F000AB4E8F57F015361E76A626B38E5758C7D8
+:10F80000C6F37E76F874CAA309AF2F03DEDB6CF073
+:10F81000DEE462729B85FE9F35BCA72A7F7EA67FB1
+:10F8200049FE2A7B96BF4FBBBF02FC95F1D3BB2A92
+:10F83000A42E60F85A74A1371997D27AEEF3C657FE
+:10F840001F2C62F45BF4EB51872F9031C3F8FA4B15
+:10F85000E9F1174A3AC19D8BBF73CD072069EBE7E9
+:10F86000FFD57C72E1F5B3D643A7AA5F97FDC14FE0
+:10F87000FBBBE5159044795A7EF042DA672E7F6E25
+:10F88000623F60FDB85ACF06834DAA40D819CBD14C
+:10F89000CEC0FEEB4ECDCEB8A919DA5B98D1F558A3
+:10F8A000284A76D17209A8FD1A66B72599FD32FA61
+:10F8B000F96DDE9901B2AB285DEE02B263463F7F7F
+:10F8C000409BC8A6E01F523812797FB9CFFC7E68F2
+:10F8D00032DAB9AB2BD877C61ACB83BC3FF63D8A58
+:10F8E000F5F386F0EFB9E0CAAB64F058F0EE732799
+:10F8F00063D9F4E3976599F0B351D85D37A3DDC5BB
+:10F9000014B2CFDF1643BBDA5FECD6B74A99EDA647
+:10F91000CBDCEE5F3FE427717469AC42FB8DCD7F99
+:10F92000FFA5F7416715AE836D868CED23DC35B0FE
+:10F93000D1B1DE07D086A375332C4D646BA6DF9161
+:10F94000BFD9AC1FD727A0BD16AAE4E513969D3FEB
+:10F9500021612D87111370DD35CBAF5C3686CA4B24
+:10F96000BCD117C7B3F14B98FE4C303C95A86D52F3
+:10F9700013D1333BBFACBFCA3B3DC960587FE91DC3
+:10F98000E55765C113A322D1D9CC97D6DBE56BA38C
+:10F99000C0DBCD028F6194718B5EF3F1AADD7ACD6D
+:10F9A0007726D76BFECAB6A588E7D27A88A09DBD18
+:10F9B0009EE12F6619DF5769D76F25AA7D5E9FD517
+:10F9C0007CEE04E30AB96FEEFE9DF27527C4666211
+:10F9D000FD12B18EFB2B9352ACAAF7F93BE79B6B60
+:10F9E000DE5F15F864E32CCC36CEE7859792001BDA
+:10F9F00067F4A73F8EBFDEAE274F15EFD0B0CDC066
+:10FA00007D359A9AB86FF6415D2445FBB91BC90F45
+:10FA100077BD801D621B35B46B120059F5995AE110
+:10FA20004EFBD3F07FCA8CFC6C7431D3C52FBF530F
+:10FA300070C0523F29078BFE9EC77E3907CE39A979
+:10FA4000A4DB83F0F7A9261C8142DBBCDE6F3E56A7
+:10FA50007000FD72DAD47CE861BCED4C8FA6987C16
+:10FA6000DDDBEC851493AF2DCD1AE57FC8E40DD313
+:10FA70007B98FC617A37DB2F62F9C6E608E5EF6C0C
+:10FA80001E4BE9EDCD067DBFAD7932E5D73547296F
+:10FA9000BFB6793AE5BBF1F9211BAF46F02B9BC706
+:10FAA000908A645C463FED6888303061257EB7C03F
+:10FAB0007FB33CE16919FD9ED37DE4DF0808FF8632
+:10FAC0009FD17730B63BA4C076C83DAF04CE8BC182
+:10FAD000F11545E6FE53B592E4C56FCACB7A20BF57
+:10FAE0008A2FC2D62DA672D582BA42E4775F847F70
+:10FAF0000F54AA4974C1048160C40D7C727B39958E
+:10FB0000A77CC3A90B15FB1B21F8A3352053BD35DA
+:10FB10003B787F4E3E1951BD4B6614036F50E5F59F
+:10FB2000927CBDAC1A752B7D6FD5641A77CD06DE3D
+:10FB3000DE57C9F8C6C2B7616510CD6367E8406992
+:10FB4000391BEFC7C1FD8306B3741DDBDAE0FA751C
+:10FB5000EF9AAD85332D7E24AFC2EDF360DDD6A9DB
+:10FB600015AC1E1BD6C0719535FEE4D672A28782F5
+:10FB7000F09DE5E3F007BD7CDE4A0324715D32CBE6
+:10FB8000CF2EE03004B58811ADB27C178A27A827A4
+:10FB900097F9B15D2B44B6EAE9F24AB39D616F571C
+:10FBA00069B68BB7EFA7764B583B48970F2B10F0F1
+:10FBB000C0485BBB61269CB04CA676717BBBA1A202
+:10FBC0009D39FF61DB3A24AB9C0DDDD02971B9B1C1
+:10FBD000D32517FF8C0021B7FBE3D249C4473BCFA5
+:10FBE0004B92B7F52423D5D93BEC723D2CE990F329
+:10FBF0000D6E9B1F3D8AB2CBE8B156D06B53537646
+:10FC00007AAD558F1D44FB44D9A1DAF069D269ADB4
+:10FC100057D0B1C94E47934E6B3541C7A8838E026A
+:10FC2000EF6B4D7ACDC84EAFB539E8B5D6A457CCF9
+:10FC3000DECEA4D7DA1CF45A6BD26B5A767A39E945
+:10FC4000316C5B8CD69D34DD2294FFACE8E1D40BA3
+:10FC5000CFC93A7D97D71BDA04D40FF52ADF275591
+:10FC6000A600F7035056D88BDD1A17F64913E0BAF1
+:10FC7000700BFE6AB1CBEF75F3FC9589C313D00E00
+:10FC80000F75DBE1FB27A03F6C9328BF2E7182CA62
+:10FC90001F97A33185FA4BF2F11DF8F24493B0811E
+:10FCA0008154AE6A175730BE285F2347E21639F0F9
+:10FCB00080892710E737A7C6FF005CFF2078270759
+:10FCC0009F129CD72B84CF24CD3B034EB6BFDCC004
+:10FCD000F635A582BF4B9B189CF0E9C309F57CBDA6
+:10FCE000E85E9F859DE482ECFD54AC916D7A765080
+:10FCF0008BDF96D79714DAF2672C2AB5F15559C3E2
+:10FD0000205BBEB4FE2C5B3E3CA3DA962F9E76AE03
+:10FD1000ADBFA229B5B6F20C7E11F96DCA4B4B6D81
+:10FD2000FC121F5A8BFBB64DA27C4762682DEEDB9E
+:10FD30007A2BFFFA55AAE165F8578BDCB4FE300A3E
+:10FD4000127E4C7CE56B1077A3BC16059217B1723E
+:10FD5000BF66C4C91FA019807684ACC528EF0ADB32
+:10FD6000D7A7AFA1A1C4F8F4EBEB54E8A57FE3E378
+:10FD7000F4DFDBBC9CFC62AEEF4A115F4FD7B1ED04
+:10FD80009284E7224C3FE23AEE62668E2F847C2119
+:10FD9000F887F133EA154D9584FC9E9E9C0D6CB559
+:10FDA000EB9B01717BBEFF62FB7C4E95BF3F2FF941
+:10FDB000ED0D7F6B2112574E017F115512E7D5A72C
+:10FDC00027FFE11976FC144F733BE4C4A1CF3F67D2
+:10FDD000FCB598EB0568B5B8FE065AB80FE5DE35F8
+:10FDE000FBB55816FC99FCB2AEAEDA6FB543206293
+:10FDF00099D7A0F4389457B2E5BF687C929C40F63E
+:10FE0000F15C36FF72B46372CC5FD07BEDF8FDBE5F
+:10FE10007FA5F9A7E9FC83D36A1FEE86B74CA3FD43
+:10FE20009A9977ECCB32DBC7B9BE89F964AB9E6493
+:10FE30003F952AE3B310F82388E7F77DA1E190CF3F
+:10FE4000F6875E9E7ED6FBB67BEBF87E26FE725E64
+:10FE50007208E253C471DCF2F2979244F7F132DC9B
+:10FE600081E5553295DFE00F6D45B8BEA9C46E50EF
+:10FE7000FB22BC6724F1BC18D44E6DEA972CF31416
+:10FE8000769139FF5CF6D1B296EBECEB194CABB541
+:10FE9000F2E39D2D2BA99CD91D2D2AD1EB8B621F3E
+:10FEA000E58473A3FA05B68FCCF30167FB7F15FBDE
+:10FEB000E8A0DAB0CC6E1FEDE17410E5CFB5ECA987
+:10FEC0003D9572D33EF207DC621FEFB05F2A997D49
+:10FED00084E7470161BF5426C95EF15526B9FD523A
+:10FEE00069DA33F6F5EA1A3440C7A4EDA31EFA37EF
+:10FEF0003E4EFFBDCD2BD7FAEE0B98F6511BB78FB8
+:10FF000018EE31CE44A9E47E0EC5B1BE8F76E55819
+:10FF1000DFFFD7D847D9E5B737FCAD85366E1FF57B
+:10FF200082BF69B9F0F72F6E1FED50E1FF33FB2858
+:10FF3000179FFCEFB68FD274FE74EC1CA75D63DADA
+:10FF4000119FB57D63DA27CC8EA954516E999D859A
+:10FF500076CCFB72BBF70E369F1B944E2F2E8AB7C2
+:10FF60000A795DAC46D7B968FDEE247FFF06D4E779
+:10FF70007D859EC5F601119FA74600ED9DC56A6C63
+:10FF800083CB720EA1043AB558E08B870766E7D998
+:10FF9000E72FF062E261B7AB40D0BBE99C289FD766
+:10FFA000A38407E8E4768CDAE9C5F449B1BEDD9BA9
+:10FFB000810F20BB5119AB27511FB0F64FBAFADAA7
+:10FFC000F0E2B5E185AD437C3C50A236BB91A7FE83
+:10FFD000D19A84FE7296ED40FEA5F3721DFDC26DAE
+:10FFE000938732F8FBC4565C83F198C1972F7E0348
+:10FFF000E31AFB74CEA4F8C696AAEA83B5AC5E7E7B
+:020000022000DC
+:1000000044BB74928EEB2A905F71157646EB2624E2
+:100010002604C4394E29C06F969F10EBA60176BB0B
+:100020005CD655D39F3428B7BCB01FE9A427B37D55
+:100030002EF97059E59AE4F3DA53934FA1F7E3EC04
+:100040001FEA8B02473FF9867D5D088225CFCA3FB4
+:10005000107CCC2C94CF653C0D6EF5EA8C3F5C1582
+:10006000B286F191F9A01520FFF9EB5448A1FFA544
+:10007000E8581C5DB0BDD1A505FDE87C3F0A975A44
+:10008000F613413797D7F0AC96F215ACDF13A3798E
+:10009000FC7D1F8DFD579D399FD542BEBAF3555B40
+:1000A000E9DC34C1F86910DFDFD03D825515BB347F
+:1000B000AB9E1EE1966CF7082CFB365DAD11F63455
+:1000C000C38F52211B68077C52FE503E267FE44DB1
+:1000D000B1DB09A74BAFF1E25EC5A9F2C7271DCF7F
+:1000E000A46BA65C2D1574ADF7A2DDBF223CB5C78D
+:1000F00073D44CBADE4A74F5578091CCD2FF04B762
+:1001000094357ED6B93F72DAEB4ABF9AE95B7AA2A0
+:100110005B91D3AEE5FDFA162BFA5F5179A91AADC2
+:10012000035ED1DF2AFDD638EACF13A813193E9417
+:10013000B6912971FE18D9CEAB50FC874F37489F36
+:10014000D279774D1A3E77997DBFA616F9ED76E103
+:10015000F4B86485DFB7D84D7078713CD4D31AD029
+:10016000B9A71AE0FEBD8CFDA3C36E5859569D3544
+:10017000CE40FDB4F6ABD3ECF09E72BB80AAFFDD9F
+:100180006C93454FA7DBA9F0778B3DB506F9DD42AF
+:10019000FF152ED823B1753811BE0C623ACB6351CE
+:1001A00009402BA6E3900FABB97DB743A2F36012D1
+:1001B000691DFFE3E74457B875EA47F6C6084F4A9A
+:1001C000C000AAAF9FDA39D2FB0378DCD220096CD9
+:1001D000F51F74BBA95C8528609CE2FBAF5C14A68C
+:1001E0007E0DF6A9260D87B3DF2BDCB107DDD84ED7
+:1001F000E3F060035AC7C772BF40D8CBDBBD3F7383
+:100200002AC571E5826F43333F5FEFCE8BB82C6810
+:100210003DB5B8AEF7D9981D55C4FF7EDCD7421B5B
+:10022000B787060A9A6D595248DFB7B4F42CE777BE
+:100230000939DF8CF69187EE55D8E47E9B8837DB51
+:100240002E81ED9EC5100F8FCF7A4BC8FD166FDC47
+:1002500047F7159E59E51B8AF12E8794888FE1A1F7
+:10026000E22AA330D6031E86B4D9E5ED74E33B5EE3
+:1002700076678FEFC8D5DE8CEBF8A47821DBAC1461
+:10028000F1303B41FB96D405249F25826F4AD8FE6E
+:1002900005F5D0C0382475ACFBE149B0F207FBD9B5
+:1002A0008F7E8AD27A3616D22B26D3B974E9EDEE38
+:1002B000A44CF2AEDD84EDC387141E6B0846606665
+:1002C0000DB12AB50F2BCF4D40511B2CEC33586389
+:1002D000BF7751B6C47E5FAAD4714F228CF65D08F9
+:1002E000FDAE967AE59F9C1E210FA3C7D99F3F3D87
+:1002F000B6A9865FB3B4AF9020DA9EA5BF0A0FB748
+:100300003B2AD6ADE77160F50178D5B25FDC2E19D6
+:1003100085B8186C6EDBBA14CFD9E2F51019C2F0AB
+:10032000DDBF01642B1F8FF2E4513F2E30E26732B4
+:10033000BC2DFFF6659D4F215DC7834D8F65D11F95
+:10034000A33C4C5E5C455C7F6C6B9BCAD30F155A1B
+:100350003FC24B20B98C8158178B2D7521FDE702C8
+:10036000C5A187EB9BF6617C754903447018C6579D
+:10037000C45FE1E99034885FE05098F1C7003E1512
+:1003800018807C81EBCF224E5F932F4A1BECF76DD8
+:10039000C2F5F67CB1B0FB8B9DF7B71CFD94E8FC71
+:1003A0001E94BE4406BCF707D3ECF76DC2D079FFAC
+:1003B0008F10BE0381480AF935EE18C7D1BF0AB1C4
+:1003C000CB3C0C9F8F7D7FCA2FCF64F57FB8A4B63E
+:1003D0000FE2658B379A4FF78A5AB3C79D65F0AB2A
+:1003E0006977E4A89FD6A3715B5CB3335D31A4F851
+:1003F000BA590C8E55410348AFC5AF20FDAE08F980
+:100400007DA6E4322FC6932E0F54537CD83ECCB336
+:10041000747978683F6BBC9822E277CD7C42E853D0
+:10042000E778D77BB81EFD3B18D7231E467A62615A
+:100430009CB72B5CFCE84C9DCE0B8D649676733C90
+:100440007E6E5FEAEA3FADF8670BB8467208705AF5
+:10045000FE85599E582BF267BC966D2790FF074189
+:100460003281F46F6A137EF7EE7A378B7A71BC773C
+:10047000D95D2FD606D67D27AB772BCE87D5336CAB
+:10048000F5A219F5EE14F5C036AE9131EE26133E05
+:10049000B0F617C9E86F8BE88FECC1EE7A7A467F29
+:1004A000F789FE0C5B3D2DA3DE83267CB671C13E31
+:1004B0006E77F959EE6482F4368FA7DF3F6412F14C
+:1004C000CB81219326CF62E35CF70B97D01157D2F3
+:1004D000BA6DF2D53E51AF05F9AA8AE2F05A1BF087
+:1004E0001EB0B8279C084CF5C62CDFBBF92A305546
+:1004F000CBFE7D96ADBEDAEA0363147DA7FA2D1F0D
+:10050000293CBE395E5087FEB89545B28877FE5BC0
+:10051000C250991EEBABDAF2AD615E3EDCFBB74434
+:100520001CEF14897B304C573E596591EFEEF13F3B
+:100530002FF8C579461AFE77134685157E9E37E15A
+:1005400037F3DE125E5EDDFAEE44BC5865DE03185A
+:10055000DCDAA785FC175FD8F9492DF6F9F17C7A2A
+:100560007E3C6FCE6F74AB54F7AF35BFFC163BFFCC
+:10057000F17C7A7E3C6FCEAFA635FFB4E6E7AC8760
+:10058000F79550CFAF1A725F18D79D55B890B27ECD
+:10059000C7B6BE9058CAF237F535ED6D9DF4FB48ED
+:1005A00030CEF28EE9BDDDAF30F8AD2FC6ADF2F33F
+:1005B0006018E216E7C16D61F473BEE6D1441C1DFC
+:1005C0008753F1DAF30331DF379D67BFFC13D7613F
+:1005D0000C53E4FB49879EEF655D5B5EC2D79315C4
+:1005E000C1886C5DD7CC38E867FAD690FE49685C64
+:1005F000FFECEB2BF451115BD7B83F8FEABB84BE05
+:10060000BAB599BF17D026EEC3268AAA093F6DE670
+:100610007DD8F8249B7EDB3F61D241F45F1D3FC44F
+:10062000DF8978C2CBD7BDE5CDD0CEDF3DF0D2BDDE
+:10063000EEA759BF3156612FB3F730FD29B3F7301C
+:10064000DDD31CA6F427CD3AA5BBD8B8983EDC1C58
+:1006500081181B7F67F3584AEF14FBABDB85DFF78C
+:10066000CB4532F92DB634334BD985FE5F2FA5F734
+:10067000346B6BD421E8FF0D53FEB834758E97F6BA
+:10068000AF9D897C06E763BFABA07BE2E38B545A46
+:100690007F414D29F9A3D3DF4DBC1E976A1BB0DD06
+:1006A000B96199D7F32613A1ECF5AEC17A63C32AD9
+:1006B000C10381B8122ACA5AEF7BC85F3501D19FA6
+:1006C000164B04B3F77723F6571D10FD15E9894043
+:1006D000F6FEE2D8DF708DE301C29DCBF2B2D75BAC
+:1006E0008EF5AA3431DFB2949C977DDC9BB05E61BD
+:1006F000611BDDDFB96006903DEA2AD2B790CF4298
+:10070000D44BF68D82CCF8BCB04F5B13D63B3F1672
+:1007100081416C7C3D140199F1B32BC0CAABF02E22
+:1007200039EB87A5E74D63E5AC5E12CBBF6429C703
+:10073000F62C1D375DB4CFB7979BE3B95AA1FBFEEA
+:10074000345E1A77B5D8F3053297CF075AAFA8436E
+:10075000B92F10E74FBFC63C1BD7B5044C7DC4EB87
+:10076000FB79F95366FD102F7F45E40B0BF9BC7D37
+:1007700093BC142F7CCFF5434B6655A5E73BE07B3C
+:1007800095C36659E677CFF7CE2D991548CF67C048
+:100790000DE387CDEA61DFD367B2DCFD2609EAAD60
+:1007A00082B62AD29F233D51B20F47F6AB31509EFD
+:1007B00095351CAEB7BDE52DCB54822B4EF73405D5
+:1007C0005C772FB0C3D57FA11DAEBB17DAE1EADF9E
+:1007D000D8335C4F78B95ECB051F1BDFB08EBFF9F5
+:1007E000DFEDE39FF17DFBF89BBF6F1FFF8C1B3F8D
+:1007F000F1F8292B5D365D631FBFEC5AFBF89BAE09
+:10080000B58F5F76DD271BFFD3B2C7CFF7C6FEE9F2
+:1008100015F6AE62B53B9B6236FB94D53B29EAF1F7
+:1008200073F46E7B3C66B34F593DD527EC5D5BBDE1
+:1008300068463D9F4FD8BBB6718D8C7143A2BF9463
+:100840006CED2F92D15F1F518FEEADA4EDF18CFEB8
+:10085000C2625CC3564FCBA837C084CF362ED8C7F0
+:100860000511077603C6814942DE59FDC533D83EDE
+:10087000BB1CF7A15109F7FB5A1F1879807D87C16E
+:10088000FCDDA382498B07E27A2E4D5A7C26AE7F8F
+:10089000AD0560DBB74DF2713FC2189F42A99607C4
+:1008A0004DE4BFF336955C6AB9F7BA59D4EB2E0F15
+:1008B00034957CC3527E9168DF2AEE0DD6F97E4BCB
+:1008C000F688D69FD5CFE237BBD8EC4F944351A4DE
+:1008D000C36070DF79C5D43156FDBCD9E7A2F96B8E
+:1008E00003C5B865D9E16A2DE7E3DE83E306F0BB13
+:1008F000697F349510BE359E9ADF6F0FCE96FE8AC3
+:1009000058DDE6A575DD2DD6F50277D38FCA191C03
+:10091000890132E0FD8695653DFB735A9AEDE70B40
+:10092000AA163570DF573A57AB46F1C8D5EEAEC9B7
+:10093000F2E46CE70FF5623E2D736BDBF0BE0E1C2C
+:10094000B0FB71198383F53EF215EE58BD2F9B1F46
+:10095000B7C56BB36F0A8A7BBEFF65DE93EA9E075D
+:10096000EB281BDD56FBC4F9C821AFCDDE2A289445
+:1009700069DF79A28A9F1B40BC84FC84DD782DADA1
+:10098000F55AC75FE518CF07530D5C077099427998
+:100990007157F07755FC456D5AB98EFE830E3A0FAC
+:1009A0000471DFCDECB7253C95F6E327C43D5835FF
+:1009B000DC3681FB1D057C9AD055629CD20D2AA4A1
+:1009C000FAB0B15DB1D5BE3156BAC5E95ED0FBAE65
+:1009D000E4C5F4DE5339A3BF9439FF3B7CDC5F7C74
+:1009E000973EF5B7E559E87B373A8B2DFD967EE0CB
+:1009F00086D4A8DCF5D3F5385CDD7C1B66FC8AF276
+:100A0000AF0BBE751B3FF4658BB730F58338079F7E
+:100A10003516C48F7EF99FD83CAE3EE8E2EF2E88B3
+:100A2000FB36E6F9D0D5C26F3A4BF85DEB211AC21E
+:100A3000C2B741A67B496FC3EF42A32CF47FD2E734
+:100A4000E670B5BAC8DF659EFB5ED5E6B2F9C3E6CF
+:100A50006CB0E767C3D462D45BB3D7BBC8BF76B50D
+:100A6000C34FFBA098EF1C685A8176BC796F7B96C8
+:100A7000062ABECBB3E0F17B6AF07ED47E1FBFBFF7
+:100A8000F726E31BDD226FF3024937DE037875F7A3
+:100A9000A8CBCE036C9F5C518AFAB600B2BEFBF6BF
+:100AA000DD563B7CBDC1EF841760598F70A83BA415
+:100AB000ACFEAD0E9F794ECCE9952BCEC38CBB38E6
+:100AC0002EF8A8DB0FF3E73CE187E1F117BDB57F16
+:100AD000BF97F60BBC9D6E949F46B569B224A7CF15
+:100AE000A73CAE98D19FCDD3B56742AA3FD8EAB50F
+:100AF000F65CEFD824207DD914453E32EB2D045608
+:100B00000FE572EFA5715BBD0A566F70EE7A5D421C
+:100B1000AFFE7CE7BD6EF447BEFDC0E14B502EE753
+:100B20003FA980978DDBB5330829DAC726DDB89F4A
+:100B30009BB75BC97A9E4B1103ACFFF93F0ED27A8B
+:100B4000396F97273985B59FF793578703C343D7E5
+:100B5000B263CFF6C775F701899FABC63B87E3BA8F
+:100B6000364F85EF44B3F4D7D7CFF9F0C81379D314
+:100B700091CED28E7D5752BFED97BB3C167D11F0C2
+:100B8000BBCC7ADC1F77BF941C92459F98E76047E7
+:100B9000EE97387C7B5C491FC2B7638B3BC6E0682D
+:100BA000DCF10EF1D5C41F3F14423C34EE516C7E93
+:100BB000E2C61D4ACA339CD2C31EBA8F6A04A41A65
+:100BC000C427D78F0B772F20FFF9C2F6D5EF282146
+:100BD0006C6FE76F8697480AF1FA82129982F9479B
+:100BE0007F14D219AADEECD81E42BCB27E67BAF3DB
+:100BF000F11CD8EEF7C6FE3F28CCEC0FE0981BF9AD
+:100C0000ABB17D151F6FF7D75E43FDD2E890A337D8
+:100C1000F19792CC7397F3FD8E73B01D7D4EC9BED4
+:100C20009CFFD089CD7136EE915D6F6D8E33F81BD0
+:100C3000FEFBDDCD37A21DF4B44F433DD0F8C07F9D
+:100C400086C0B26E5EEEE7F2D875FF8FEEBB8BC941
+:100C500047D71F3DB47E743DF5DA193A9B77D72309
+:100C6000FFA75867F5173D7521F90B163D36B15FA3
+:100C70004FEB27F26BD2FA2E99B87FAEEF61E3F417
+:100C800063D9BD2275D0E799DD0AF8189C6FBFE8DB
+:100C9000A17B528DECDBE26AA4D702D2CB985FC273
+:100CA000F0BC70E7CA7794E1D9F01DEF2FE3A503FC
+:100CB000606218467A7FE3EBE78FC6D445E72B8D59
+:100CC000708CF4AAB35DE32146D711B9E978023EEE
+:100CD0007463DC4AE3CE557CDC7646C750261DDFC4
+:100CE000C65FC665D2F17B0E3A9E80861FE2F92070
+:100CF000ECEE93F55CD83C3F5BF0D8377BB4B74C57
+:100D0000BDD01B9EE74A1CAE5ABFB1C28FF2B5EBF5
+:100D1000C1FBEE2AE2749EC210D3F5D08933F052A3
+:100D2000F7EBAE6357A27E3CF69447C3F57EDE53E5
+:100D30002F90BC753DF6BC5B27FB1B0212B337BA84
+:100D4000A0FBA703ED8F8512CF346E0BA63CA13418
+:100D5000BD16262F9DAC87E8FB61FA9EE472B03089
+:100D6000B96F9A94857E4FFBF97D6E48F625BC2CB1
+:100D7000D8F627379D835BE82A8D457A1E9E84DF4F
+:100D800073D1D39CBF86F33FC742D76D5C7E73C9D6
+:100D900069D7168F8A710D4E3A77B9F83EA131297D
+:100DA000BD908DEEE63A78BAE7AA4F38E55BCCBB4A
+:100DB00037F9EE7D3EA787AF1D7EDDC63726DE8E76
+:100DC0007C985DEF1FF24B028EA6C9A58333D741F5
+:100DD00015A2F1FEE569788FD0DB642C7D40A1F788
+:100DE0004E57B43F43FADBA92716E6B0B3FF26F40B
+:100DF000D3C23DFB86A33E3BB2FF09E2C7853B0F52
+:100E0000BB717FF3EC8E47DD9D5569FEC775C1FA56
+:100E1000BEC59187F70D27FD8DFD67A1CF71D17FED
+:100E2000E35E7BFF8D3BDFB1F53F3FDEEE26FF6AE1
+:100E30002FE3BCA91A97E37CDFEC7001BE9BF4663C
+:100E4000BB32399B1DF4825817BBE36A82352FA24F
+:100E50007F522974EBA8FF5A961A2FE0BB89F1E75D
+:100E60005DFCDD4AD578D1C3E43351E0D671DFDBD8
+:100E700012BC0C748B1E6F73E0532BD226E07E40A5
+:100E8000AB8B8EB6EEBF4CF80B0CD906FFA2E0E49C
+:100E90007EF8DE15EEE3747C27568D70FF7568D200
+:100EA00064BAF7A8C99A2FEBBACDFB43BF1DF2BFB6
+:100EB0004B9341B7F0D7C889979D8D2E3B1574DBB6
+:100EC0007E605D1D3F0F36E7BF6E006CC2C723D644
+:100ED000493CDE3F7E318F3334ED3B70DCFF72DA0C
+:100EE0007B60183AEA2352473A1FDFB0DC734EC7E3
+:100EF000F1822E533C738436012AC42808C38B71B7
+:100F0000B68371DFD54E6980A9374CC7E70DE2FC87
+:100F10000DC7287FEBE4BF50DC63515E74645E5FF5
+:100F2000CC178A771452B4CF13CF06809C5756D271
+:100F3000933E803AF588D59FE4814DB49F4177E692
+:100F4000C93E69BC98F17666BFEB7CE3255C8F7087
+:100F50009EFDF19D367CE4A8989F1FF0791B94EFCD
+:100F60006BE61DE3604DAD462CC1249A31C935189E
+:100F7000CFF7DB249C5F29B4535A061D94167A35AB
+:100F80004925F85E267F970C7F8193790EF84EC134
+:100F90008E77DADF3728FA4B3146C784D8E76C2DD5
+:100FA000B0C7237D3B8FEB996BF26433FE3966DD6E
+:100FB000B725A08170E02BE2CF9375CB415EECAA00
+:100FC0003C0B9F29810E1E5FE6D82F5FA82CA1F352
+:100FD000FD95E19EE3BA968BF8F05CE56D7DBD333F
+:100FE000B700C1CFFD609297C7791BA06B567EC436
+:100FF000589E1A6BDCA4617B4FC7857CA8209EE3BA
+:1010000094FA50AE589A877CC5E8B05AF061103A0D
+:101010004527C7C8FFB1D91D4B201FF6AB88493CF7
+:1010200098282A71BF9AA158F940CE9B51D253DC1F
+:10103000164C637C62899BD92AE8A2AAA0FAAB115C
+:101040009E4D82FE4EFEB4C7C19A765D40E43C22BE
+:101050001EEF67A37F47EF8CA945018A7F098C6E3D
+:10106000B906DF6F55A14943BD1A30E35BC47D0F5C
+:10107000735FED7CF7C5E3888F7589FD7B46BCB84F
+:10108000588FE97E5C16BBD9B91E3F98973DCE09B3
+:10109000C6668F4B34EDB48FCBFFE6FEB3C1DBF1F8
+:1010A0002C01A11914D7A90ABFC584691AF9DB8FCD
+:1010B000EE94F87B1B0E7E3ABA2B7F387F6C47A3E9
+:1010C000F7CBF3C47769E7BE7D685FB584C0282895
+:1010D00024FDA72B0CFF2BA4915E89A50B76BFF3F3
+:1010E0009B27D18FBF57017CD7ED289B6307CE5339
+:1010F000350A906879B0C646E78F3BAFCC734C2E6B
+:101100007FD76AA6FC05A8DDF19D12DD1753E0EC40
+:101110003BF1BDABC6832E48B2F2E3C0FB3DBE89B6
+:10112000DB0D737EF1680D9304D820E0C1F5CBBAD6
+:10113000CEF499EC07DDC22761735D881B1DF8DED4
+:1011400073BDC04FDF68A1AD9E39BFB7664D3E4845
+:10115000FE9F187FFFB9DFF4525BFF20FC233AFBB0
+:10116000877C99E16790636EA075259A9F223B88E2
+:10117000EDA771FF91942208B7D39FB2708F44EB13
+:10118000D9D56C3DC3F7D8AE4E3AF6A38E782A1364
+:10119000FF4EBE9503C28E0C4020079E23A9D1743A
+:1011A0003E4B7277ED2F14B2C7AE7D484A523C7564
+:1011B000E799F9407857C82FF51A34DDC1569834AD
+:1011C0007F3BF0E709DBF1EED3ED78CFABB4E3374B
+:1011D00018B1E3D189E7FCB1836CF5E72B0D6E62A2
+:1011E0003E81EF4AF60FF1CDF424CD63219B474AAF
+:1011F000CFC4E7DCBDEB56A0BFA4573C3AF07796CE
+:10120000037F2760EF3E5E0A516FB125FE534D917B
+:101210005C39E5D0C45399D63181BE4582E4A70E2E
+:101220008B4EA47ADEAED4DBCE85AA3A427268C673
+:1012300029E775AFABAFC249965E77E981C3B320AA
+:10124000B7DCB5377B23F52E3C1F8748FD103C2FBC
+:10125000D728DD84F547F4B4DE1A349E0B221AA693
+:10126000B7887393A355FC5DA4F6D47BC568FFDDF6
+:10127000527DEC12B4FB1BAF8228EAFF6490AFBF33
+:10128000BB455A17E471D637456530D05FB0574932
+:101290004AE887D28C5F5C8076DB5E974EEB9F7668
+:1012A000EC37FF46E5A3343CC72891DB46E2B8ACF7
+:1012B0003EF9FB8FEE7D35F45D8B7DD4B5E7B661ED
+:1012C000B83E6D94616EB67D407D808FDF55F99795
+:1012D0006264CB05DE63B42F5FD969F7B3B9777366
+:1012E0003FDCC23D97923D7A60367F8FF3B123FC9D
+:1012F0005EEA2465C657BFC4F2E3FE53BC6304C66E
+:101300009499C53C9403E999F0313C333CAE17F114
+:101310009B8D7F95297E73DCF920A1BC8EFB23D0A9
+:101320003DD4D14DB369BD7A3234E920A6757B2511
+:10133000F21F351EE1EBDB980EBB9FE89C3AA61727
+:1013400058FF357BB97FABA6939F0F9CF3A2BDDE00
+:10135000B84E7BFEBC5EF8775940AC5B21283E9DC1
+:10136000F8DCBD2E6355809FA7D1BDB2889A7DFF62
+:10137000D519E47618C307CDFFE831882C63F3381C
+:101380005A5F3A01EF291D7D8F9F371CFD50999CB4
+:101390006D7FB539C0F965A39B9F1F6F9C1D482EBB
+:1013A00065F3D83F7BDE40DC57FDE3DF6303B59E8A
+:1013B000EC12A622645A138D7C188BF2D1C2EFBBBB
+:1013C000415B49B6F7934DB930E5C4948F92D9FE8D
+:1013D0005836BFE8A020DFFFD5CEAE94307EBBEB01
+:1013E0006989CE98BA9631B87AC0631C96F5477869
+:1013F0001AF7BC4B7E0AEFDEECFEEEA703219A7FC4
+:10140000D7B2F8D2F318BEBEC7843B8EF2E06E2B83
+:10141000CFD67F1CD693FF6A7B80F3739797EFC379
+:10142000416D2B991A44399978F10A06E75D4CFE13
+:1014300070FDDEE88A10DCF10540EFFF81B85F58EF
+:1014400076096CB9C9B25F3B18987008E97D28C06D
+:10145000E38FFAC42212C21DF9E8FD10F67FF403EF
+:101460000FD1AF54F88BCC764703E21C2E68FC8674
+:10147000F8656E1129C5482C14A91F0530620FC3E9
+:10148000B7457FA7E916A7710A634C0732780A03AC
+:10149000323F0F63FB34DC7F3482F913A7FD8A29C6
+:1014A0007F78E94DB5C4DD4B7BA55490E9CFD1DE03
+:1014B000400AFD328573657C8387D9A35EDE5F8732
+:1014C000DD6E450D8CFA177500509EEF8F4C7D6CCC
+:1014D000EAF19602AEFF5AD6A9A41F37A99D3EF4A1
+:1014E0004B971B7AADCAC62D54758AB7183097CB67
+:1014F0007BDEE07B0ABAEDA2F3001EF948C9EA1FC1
+:10150000393368E22BF60FC4D7F083C7F6A37915F9
+:10151000F1411FA4F72461F78C7B5BBC8B28EE198B
+:101520003476DF23B0EBA38D3E61C740DBEFF1DC07
+:10153000FE89BFAA747FA05BFFCC9E44EB2928558F
+:10154000CF207F9DF72BB13D10FA87EDF6082FE7EE
+:101550003C174B201C4E7D3316985E927AD73B4E3B
+:101560003A3323BC3B5FC69032EA2093334B7BA7D0
+:101570009EEA1714EBACD05327607CBF0BF5343FC9
+:10158000552F8E3CE3B1F08FA9A7D2FC9424BC3A2E
+:10159000C791C0DB9DD706A37E794E413FCAD109D2
+:1015A000FCEFFCA4841C15BC97BC18F961FDDE8B14
+:1015B0007CC8F7BB0E4EF4A2585D1BE6F7CED47D77
+:1015C000D3E220D8C77AAEEC02AF1EA8447CC88410
+:1015D00007456379CBF8C7DB2471EF52CF9F96E5BF
+:1015E0007D6C33BD36CCEF95ED3A38289FEF4753ED
+:1015F00044F76EBE17FE0B532E4C7E77F2B7290FC1
+:1016000009D64AB6D8118AD42EF68F763F4242D8F0
+:101610001109F3FD997809D9878B847D98080C5DB1
+:101620008D7FE6A02555ABE1B9C7A2E0208AAF5E69
+:10163000D497E3CF890F336DFC80D98B9638F84669
+:10164000F518F9C71A3F70DBBE9BF8CD851713BF9D
+:10165000E7227EA58F8FDF73829CCE4E3C7FD2F92E
+:10166000975D3B36EB7DBE7F95F99F07B1273BC960
+:101670001FCBEF9398FC66EA8F9AEB5A13797A5A4C
+:101680005F98F7414CBD63EA97731ADA9EC9CBA203
+:101690003F9C7A23E2D2BEBB86E12FF2B300BD7736
+:1016A000E2D423EFE12F25E477BB3BC8E07DE4D90A
+:1016B0003765F49B3CF6533677561ED957C7FD82E3
+:1016C0001DA776DE65DAADA6BDEAAC67DAABE6BA91
+:1016D000639E37FD3A187B00C797F630790A617C24
+:1016E0002CDF271F0CC41EC2EF790C663FC60256C2
+:1016F000A6CAF97ED62EAFB9E433CF217FED299566
+:10170000D6BF385BFF8648997098E3D707C5BB0200
+:101710008CEBD0AE29AB013ED842FE6E40D970882A
+:10172000E1FA8CD74B719EBF1276D97362BD31D36B
+:101730008381E80184DFA542DC53FDF1E136FD8BB6
+:10174000BF0E1AFBB13FEF6483E6D15F8308DAFB7B
+:10175000FDD57629C2E0286CD0A56E678FB9AEB3EF
+:10176000FEFA4FD1E9DD8FFE78A700EBA37D9485CB
+:101770003E7F0EF2B8A605DECE67D1846F9CD234D0
+:1017800039D4C3F97AFA3D8488F073D9E3408E3EA8
+:10179000F5C2003CFF7CE507EF06F15CEBBFD463CC
+:1017A0004184F3F525BF0FE27D885796F0FDC7957C
+:1017B0000E3BE784C0DFB450F44890A5DF69FEA873
+:1017C000C6F60EC9627E3E737552C14D6937BFCFF2
+:1017D000DF9147BE3D33BFA0BD8F2D6FF2E9020FF1
+:1017E0008FDB72CEBF2AC4E368AEDEB9C5DD5FC74A
+:1017F000F163FF8DE3BF2EECB8D77707C9FF61C255
+:10180000336BE74837E2E1BFF67AC4B97F878BE3F1
+:10181000DF9882E77331410A279CCF3E9D47FD5DEB
+:1018200075BB4276C74C36D662C6DFB1BD57D33ED4
+:10183000DC398FAB5ED127F563F4BB6A9544F62A99
+:10184000D65FC2F821B678259DE339E73933EE88B3
+:101850001F11768533CE64CE5E7EFE5E0FFAEAF10E
+:10186000E559E24EF65E4CE76E737AD9F7948784B9
+:101870003D5103E760DCFC09A85A5BA5F7BEEF7990
+:10188000BD192888ECCD662FA5479A359E0AFD39EB
+:101890007FCFBE6789CFD48E1A94FB5D075FCDFBE7
+:1018A000969ED6E35FDEF2EE3377B3FC28E07E1E31
+:1018B000D3DF3E43E0FD02A1CFE7087B61D4073DC3
+:1018C000EBF319888FE199F09A7A7C06FEBD410B03
+:1018D0001E4CBDEEC4C7F18383F3903FEA42CEF3C2
+:1018E000E64F86975CED1628D9E3194D393A12E494
+:1018F0007C5DBFEDD215A56CFCC453AF9DD1C9F57D
+:10190000C421D413269F0234B9518E9DFC68F2493C
+:1019100037DFEDBD99F064F20793ABB038E70CE325
+:10192000FED0C97FBDC53775B93ACF40BDE0E4B33D
+:101930002EC7BD6833BD2CC4FDEFF5BA3109F7AB36
+:101940006CB959C1CF03B93E7A5D6D7BF64694D729
+:101950006D5C5E163CFED04F500FCDFBF1ED21D4F7
+:10196000436FA86DC5385EC3F6E5213C577F5D8D9A
+:1019700087B0FD1B49256BFCE3CE9064BEA7618B4D
+:101980009380D6F82528C7FFD8EED2F01CAC71871B
+:10199000879FBBEFE67863797EDEBE3B7B9CC4BC51
+:1019A0001FDD5EACF3B85B7BBCC43617F92FD0BF2C
+:1019B00086C3E43A2FEE3E7F6EEFF93CBD71B788E7
+:1019C000B3D97D71D67809332EC1C9C79B1CFCCB16
+:1019D000F0437EBF38838BDCEDE29C3C71FF9DC3FE
+:1019E0000F33F88E6CFB5548AAB2FAE3F979FCF193
+:1019F000F6EFFED02BE7E6DF2EC1EF697B229935AB
+:101A00007EA2C1950AE1BEAA618B8BF6810D0F29DA
+:101A1000F45E1DFCD143EBF9FC877EF68773197CDD
+:101A2000F31F71154DE1D3A03809935EDD712C824F
+:101A30003EF31EFD193F5FD6453C8BA0D3FC47F615
+:101A4000B9312EC789CF89EDFBDC9D8E3808A257AE
+:101A5000FBE149749FF0FEF7DDB8CEBEF1B404FDA2
+:101A6000CA33DBCFDDF2B310EA0BC413C50108BAE9
+:101A7000E58E5B4A5DF2D3D1548FFC76BDD17109FE
+:101A8000CAE218E2F7877FCAE098FB9287E2A7E6EE
+:101A90003E7C1DC519BDA63671BEBF677931AEBF8C
+:101AA000735DF1628D52FE7DEEE6EB891FE73C7FB0
+:101AB0007DB1B88F54C2FD3DF1129CE7559BBE49E4
+:101AC000F39C0D31E2C7B9F72851F4B39C5061F291
+:101AD0002359E466683E979BD7B67AF0311D784D5E
+:101AE000F839E3BF53C4DF8B749E57F177634E8898
+:101AF000FDF73F43DDE78D5EEB7EAC71DBCA0EA4E4
+:101B0000D39B038C7E1AC513A87181377A7F5D79C8
+:101B1000FEC27E42BFD17B37A61D3411BF63FD0ECE
+:101B200017BD7B6369677BB76691189FC1ED9746C8
+:101B3000B0B438BB1FF49BF9921907CFE36F4C3E4A
+:101B4000CBA507B6F17896F70E713D83713954DE57
+:101B5000E14AF5B3C5E3786CEFA2A4E34C5C42CE56
+:101B6000EDE50C4E8A97E9C6EFD312FD3D08935F71
+:101B700066AFF7D8E3F3BAF9C7F96E8F3D7E668E8C
+:101B8000C32E33D38CF53FDF715EB7E9D4E2671A19
+:101B90005C498A7F6AF8A387F6270D0FB9A2889758
+:101BA000B7763EF3876F31BE7FABDD9463BBDE75E6
+:101BB000CAF1DC5D63209B1CBF158840563966DF87
+:101BC000B3CA71207DAEA1C367AF77E7E4D0BB5F36
+:101BD00075E093D90DF91847FCE603F30792BFC2ED
+:101BE000815F53DF3AF5E8AB219DF09C19EFC7D731
+:101BF000FD743C26C7A3C99FF31E5C40E374F3B198
+:101C0000C9A7261FE7881B73E2D3599E8FBEB33145
+:101C1000997E91782D54E2DF694AB881BFF726FB9F
+:101C200023C8BFBD9D77FE36BFDC7CFF6D04DF1788
+:101C3000F2F3CE4840C3BF5881F7E5946CE7EC91CE
+:101C4000897256FBFF07F9DC4E42B72CA68FE7736B
+:101C5000FCB52851E1C86BA77B0C74B68A7016845A
+:101C600048CE5C224E85F54CF7D12379F2BB3AEB96
+:101C7000E3AEB5072E52D13F3B4ABE6E30CBEF5A92
+:101C8000FBE2452AA377E43CF9D1412CBF7BED1F51
+:101C900079F90879948BB1EA8EF84B17D5B1FC42EB
+:101CA00031EF85A69FA4658CCD4FA2CA87EFC0F304
+:101CB0001CF5A7FCEF11AD6672EFAD4E9F33E779CF
+:101CC00020EE63F93C374B597E45F9EF57E026F299
+:101CD00057FED8867CC257AD8E783EA279297E67A2
+:101CE000D11317521CE9E3F9DC1F7DF6A3E7D1DF1E
+:101CF00075FC0CE1B83FBF6F6E385A5CBC9F23BBCC
+:101D0000CE9E88783E7B20FAD4D2F4A85675FAEE9F
+:101D100063688F73BB3F8CF75B12056EEAE771C196
+:101D200067A79A9A712F4A1EE70B255F6E7A84A5E2
+:101D30004F0B7EF88F7CCD5C8768DF7DF4A97E5BDE
+:101D4000F9BB31C7CE407A2BCAF13FA3BD79ECDB9A
+:101D500079F4F7475EF273BCBDE4E778BB3C7F8D56
+:101D6000EB2CF6BDDA7BC675C8F42F493BAFC774C0
+:101D70008B16FB25A707A4B0DF6F5DA9F07E034D8E
+:101D8000417C374E32B81D2E31669AC1F0913040F9
+:101D9000770F4611B6C77F284AF5B1148D1FB48D51
+:101DA0000F656CDD64727EF9384E2F865B5A475F93
+:101DB00018CBF3267CD39383129D3AC1F327846713
+:101DC000A4273900F753DF626615E77BFBBEBECB65
+:101DD000CFCF37BBB0FDF074FC40E3DF64DACF3621
+:101DE000E21C58FED12320FE5E217F5FC7F47B8C6E
+:101DF000FBF5B5E4FF1EBD673E8F3311FE2EF33CAD
+:101E0000BFE6003F9F73FAB7CE8335A44FC739F4BE
+:101E1000E8797BBE4AFAB5B7F3B97F987AB5144A28
+:101E20004FF37CEEA3FC53389FFB1F7622B26E006B
+:101E3000800000001F8B080000000000000BB55A56
+:101E4000097454559AFE5FBDDA92AA54AA2A45082D
+:101E500004E34B0224210B45122004D42220D0316C
+:101E60004A801681F64881B298AD98B4DB699D43EB
+:101E70008520D2DAA319756CCE69BAE785D611250B
+:101E8000E92924D1E05432C52204254E9045A01DF5
+:101E90003BED7423DA64313D824BF761FEFFDEFBDC
+:101EA000A82541E93E67C8E1DCBAEFDD77DF7FBFF7
+:101EB000FFFBB77BDFBA4409600CD03F1D2403D47D
+:101EC0009BF19702307C3C2311F200F47A00D9098F
+:101ED00060546428C1F62AFDBB0DA06D338E338596
+:101EE000FB6F252A6C9EFC53F6FBC1462DAC868207
+:101EF0008879ED7CDEDB652B4031CE7F1154533A7F
+:101F0000C0B4BEEC9FCFC1BEA1DB002ABD979EA08E
+:101F1000FB6775AA1F459B71ECD74521BCB435CE34
+:101F2000560053F195293A50CC6C5EB88AFFE39481
+:101F30007850B2C37D4BB633AA2FC7DB764122FE61
+:101F4000F07B7A53508E227E0B12DCE3A3E679DB22
+:101F5000B6A89BE42EB2AFAF20B9134B32A2E681F4
+:101F6000E3FA4FFAB09F8D7F573300A643656208AE
+:101F7000E52F844A8F84F2BA3F027708E59F718A81
+:101F80008FD39E7387FCB217712CF928FA7A2944F3
+:101F9000F4719EC73EFAC27138429EE9F604D70535
+:101FA0000BFE180FE3AFCAA3E2E80E114EA7643789
+:101FB000AA01EA8FE12017B69F810A88DB342848FE
+:101FC0000486AB0C2AF6DF04EF0B73B0BDB279C800
+:101FD000717852184F87271ACFA445D1788EA98CD3
+:101FE000C673EC8A68DCC679A3714ADD3825EAFE3F
+:101FF0004D9B0AA3FA373F561A353EDD5F16D5CF03
+:10200000DC5E1E357E52D3D2A87ED68E5551E37348
+:10201000D4B551F7737757DD90FEF303F551E362C2
+:10202000F53FB5E32751F396CAF7CA9011E6811F31
+:10203000FF880785A462D23FEA210423F53FD3E558
+:1020400027C6FFCDFA7F98F49F1BA17FF9DE44AF2E
+:10205000356C6FB1ADA6D79FD05AC7905E714E1444
+:10206000EE0AE919AF0D1AACDB256C1DC89D7BF19A
+:10207000FA63667EFD5181CF95B83495D6EF081E80
+:10208000FD5AC216D5C2ECD0FFB1456D44DE3C2AE4
+:102090002B0DC4AB17E54A09509E54549D2E13795D
+:1020A000A4838D01E4F7B33ADDEACA08F99EB3735D
+:1020B000BFF29C5DC7DA5F18D156F1BDA916F09B3F
+:1020C0000BD973B436FAE7015CB72D8981822F2CC6
+:1020D000DF3E7F0EDE77F4652B0E0033F56F01389F
+:1020E0001FCFE53D1FCFE55C65521AFBC87FC8EAEC
+:1020F0002492A7D9EEDD69C7F79C979E30E09BC17B
+:10210000E0F21BC8EE52CDE0B7E1FB1A0DB0BA12F7
+:10211000FB0E7049F5D826C24E3BE18B62285791E1
+:102120001487AA7213FBF0FAFB24D138B231B70E30
+:102130006600ACD4FCE1C61CE60F87718DBDA450CF
+:10214000BD9208D80E3F90C9AE9FBB0FAD10EDE910
+:102150009C91E3A1E17051F8C9CF379B597B69B3DA
+:102160003DCA6F6E6C7E2141C179CE65C3A2400429
+:102170007E5D84DF746A6586DF80FAC7648267707B
+:10218000DDB79349689FD4BBCD8A439EDAF10F95A2
+:10219000807A30B62DF1A34E60A55161E3B5797C0C
+:1021A000C1B940381063E9FA3D1FC22692EF9E6F15
+:1021B000B18D785F8FDDC0DED743EFC376393676D9
+:1021C000C46D39EAC541EDD1390BC82EF07A48C249
+:1021D000FEE26E30903D2CF1A61B489E93E03EDD62
+:1021E0008EF29CB52BECF91F42A581E43A735F6D2A
+:1021F000028DBB369F360F0AEBC078F2A1C36F4841
+:1022000046BF35748BE4DEA5B0F799E97AE5BDA940
+:102210004F5A95F0FBCE80B7FF34EA7B29B8D9BC82
+:10222000DAFC6879517EF18D8DD5BF4BCA207FA82D
+:102230000333F9C34E13F3878355575A5FC2FBAB81
+:1022400053FB6E32E273E7ABBE9D4CB8ACDC21832E
+:1022500082FAFF24C1FB07FBF4301EE71EF873026D
+:10226000DD5F65525F7909ED00F698DCAF003DB7A0
+:10227000873DA78D1BB0CFFD8C78072508D4ACEB2C
+:10228000DBA786FFBCD773C612CF347E3D28F85536
+:10229000FF5AD658E2537DC2357EF1FE2B996389F1
+:1022A0005F3324CECBD879BB905F4A16AE1B79A59D
+:1022B00020AFBABE2A4B223FB1EFB8B388E4D48333
+:1022C000F76AE4BAF6BDBF2A97EEC359D70DC94BDA
+:1022D000B6E94739EF012E678FB08F15C1A422D21E
+:1022E0003BDA9DC581E356FDC76BFDBF257C3AF700
+:1022F000BCF2388D29BE313C34FFB4379EC7231061
+:1023000071CE2D70C13897AD47510721DE4DF9C20E
+:10231000F5FCD65EF20BC8AB2B3A747C99E4AF2A7D
+:1023200081FC8205DC0AB5E865DE9B8D7A6C3CA0F9
+:1023300083A7B16B23A7A6F99F12ECCB3AEE7FB02F
+:102340006F4EC13822FCD324C7BF2EDACAECC76354
+:102350005D3383B9442657F1E1AA0A7A2FF4A21F0C
+:1023600047592BF18FE2C16CD874280EE59CB1035C
+:10237000F3031C37F32CBFAFF9F55921DD1A6322A3
+:102380008DFBD917B28D208A8E03B30F977F4AF346
+:10239000CE8688E746890FB31C7F5F7C98EFE0FE0E
+:1023A0002190CDFD7B2014AFFAD3D9B44595F9C85F
+:1023B00017278F1F2D8839D9B1511AC836A31F5E30
+:1023C000E468DEBE7D02D26122C785FA8DF45B2906
+:1023D000623CBE96371E9EC2FC21FC05A522BCECC9
+:1023E00042E618798AD1EE78307647E59DA123DF61
+:1023F000D8FA701DAD4EE5BF485F4398D7905F880F
+:10240000D3F7191DA3ACEF4DF2AFC8FFE71C3A2676
+:10241000AFB943F2A8F87EB3E20109D71067B74F0E
+:1024200093A5F0F832078F4BB547CEA719515FFD42
+:10243000BAE3B63C9CBFA6FD0D1B2E1F7E6CF3AE0F
+:1024400073E03CD5E73E9841A10B199E5699403860
+:102450006524923DE5EBC1AF2F1C29876F072E063F
+:10246000295FB72389B5391D125B9F2FC4D739D097
+:10247000D1E88CF41BD79EFBCFCEF1A4B73D6360AF
+:1024800005F9E3FC60D106E231C962405DBCFE554E
+:102490002E9BEF09473ACFAFF5A0A7EB00AA6E2914
+:1024A0000EDA63C0E770DE81AF64364E9B37BF63E0
+:1024B000AE6C471EE5859A0E525E18173429A4E7C4
+:1024C000B89781E3128C637ED1D7B510287F1D7435
+:1024D000805BC2FBADF1431F132F863A4DCA2E8994
+:1024E000F06B0227CEDF6AE4F133070DE10D6BF8E4
+:1024F000BAF6BEB8E0CF81FC15F2C3A3D27D7D133E
+:10250000DC628DC43D81C9FF4B07E7576B7C486790
+:1025100025BF8F9CDCC5E40ACB09ECBD9A9C39AC85
+:102520000E68350E5D78DCC5E4B2131F7280CB09EE
+:10253000C12CE5157ADEEE61EB88B32B6EBF345209
+:102540002E5F01E6C56877CF6E816B764E76EF8B96
+:102550000FF7CD6813AD1920FCC229968784FBE8DC
+:10256000B04AC2CFBFF1CF67B66F9DC3EA23BF8C1D
+:102570007CB0609BE0A47572FBC2B2C933A690E345
+:10258000E0469C2C667EFFDA78E4BB95FA563ECE98
+:102590009D68B7944BCC6E80ECA64EF89987A4D07A
+:1025A00085DB50B55F860E1628284BCDD1B7196F45
+:1025B000AB75C197F2F17E59BC3748FEF7AD8F7409
+:1025C00060C3F57FFE5A9C5A817864EF6F4EF658CF
+:1025D00047CEF7D4D92DCFA792BEF74B0A228D79DB
+:1025E000E1501AC95717FCD4E8C17661C7EF8D14C2
+:1025F0009F5639BD47C80E4A3A1AE6117EB3A0A9C4
+:10260000D16E657ED14B3C0DA470FF317C6AF2AE79
+:102610008608BC2F3978DE0243DE9BC96E82C23E3B
+:10262000BB28FFC1B65DE461ED0756662AF9E1E714
+:10263000FC70301570CE2D70389570D6AE0FAAFA9A
+:1026400045C4A7DC33E6D59E08BE5D10F67E41BCCE
+:10265000EF1F9DDE8F0887EA039F186DB82EDF1FDE
+:102660000269149F0298A7D9BFC32FFA62ECC6A7CC
+:102670001F32D278DF45607E04F5BA3511F5B4E734
+:102680004CC7943556263F24E2BADBCF9998DF6CCD
+:102690004FE7F6D770FA7201F9ADCB9DD537135ECF
+:1026A000EF3B0C1ACFCBE2C99EF602F3639A3DE6EC
+:1026B000913DA2E879C4F362EAE7B0F95A8DBDE52D
+:1026C000CCFEDA7540F6873C67BC479EDB29FFC825
+:1026D000B323EFD9F359CC9E5B7B31E061DF8F7E72
+:1026E0007C12EB972DA37E6BEF7C3BB3671D425BA7
+:1026F0004876193AC8E609604C23D549501999A77C
+:1027000096396C4C5ECD3F563AB8FF0F642B896EFC
+:102710005C8F4596A3EC20225EF2BE88A72B9F37E4
+:10272000FCF4C509644D222E88BCAC4BE4C1E02DFD
+:1027300062FEFEC72296D5BF53BAB805D75BDF232A
+:1027400073FF2F787250E4C98737A7B03EC50B05D9
+:10275000F5341D5B0FFAD3199E4DF3D0C6A064511A
+:10276000D3216A4B2B03F3107198B3A2F790819B8E
+:10277000732EF1AFEDE00F72F5C4F77326884311A5
+:10278000DBBE19FAF875C4E1912EC47F94B884CBEE
+:1027900061FC4304181FAFC79B41A9EFAED96E4C33
+:1027A000F99F1FFB037D1CDA0F1103F1C87B7ECC60
+:1027B0004FFD2850BBD333D58938FE36C93BD58968
+:1027C000380E9EF826997C7AFBA94F6CE4EFDB8CDF
+:1027D0009E5CE2595B06D60BA3F0738293F3A7D8F5
+:1027E000149DA76BED5227E7FF643F3C43FCA96BA8
+:1027F00093ED2AEABBBF4DF618318FBAE0F126EB14
+:1028000011D28BE05F3E9BE2BBA87FD771D8611DE0
+:10281000E52F1867D6BF6888AA4B6BC4BE4616F46E
+:102820006D4B459C7C2F4BACAEDD18938FD450FE86
+:102830005240F545B391D653F572CC3C94C714D0B1
+:10284000B8EFAE73973AC53E472664521E833C628A
+:10285000F5F4D069D9BD8B62A01EBA4DC8DF3D3AF0
+:102860008E13FA4D668F5A3E637279E691DDCFD3AF
+:10287000E28AA85B875A2595D9CF6EF4F3D82FBD8D
+:10288000A83403C7E154CA0C5A0FE765A99E8F2FDD
+:102890000DA633FB2BF1603D8FEB5E8FF5BC4AEB51
+:1028A000D6F23CD5C0D68FE197E579B3406DB4E15F
+:1028B000B80DBB25B6EF53BDDB1095E7F9043E35E7
+:1028C0003B4E1CA172B23610735FE0E38BC1E70D83
+:1028D000FA316B244E8F3A45BE97066991F91E7402
+:1028E0003B47AD0B347CB43CFB4F069E5F7C20E63F
+:1028F000D7C6FD8B93D7E7751E60FB4735AAACAAF8
+:102900003C1FB4AE41BEDC2FF872BFE08B0FF8B8AD
+:10291000DADD921AA278F533AE7733FE112EEB0290
+:102920006B16A42A23795525F0D8D86260F92FC0F8
+:102930002623D9E7C69D31E3042E5531B8D479A5B5
+:1029400018F9783EFEB7CA576DE0FB35D5C82FBFE2
+:10295000F2FF276FACFEFE5DD3DF149812A5BF45D2
+:102960004937A4BFD83C79EF9129167A7EB83B83CA
+:10297000ED4368BC899D6781C8B317EEE0F9687FB5
+:10298000C73C4B3ED553C7F56E09E729EAF95F5BB3
+:102990003EE251D82943054E31182C7AC68FEBDC24
+:1029A000D73D719982F1A1B047CFE24B514FA14A77
+:1029B000754D614FA1253381194F12D50B380F8BFF
+:1029C000CF83C7279ECC233FDB3DBF98606F385E27
+:1029D00068A13C621FF07D0DA9A738A92F22DE74E3
+:1029E0003BF9BEC6B694FF7996F2FC857B0D6ECAA4
+:1029F00047161A86DE9FEDA2F7EBDD0DD8AFE95939
+:102A0000BB258EF4FE9AE4A674FC486FBDEB47A488
+:102A1000DFA0C16E62F23E7C90EEFB5B24F7241CCB
+:102A2000EFEBBC3DB715FB85CD456E82597B5FA1B1
+:102A30004379A182F2C5711656C72FBCC9C0E2EE18
+:102A4000A5F1965F53BE54E5695E40FEF8D2DBFB0C
+:102A50008CE40F065B2548C1851C4939F41B3FAE49
+:102A6000F3D29B278C9494CF6B3B61ECFB8E7CA2C2
+:102A70005F9521C4EAF72623D541B5CD5ABFCF488B
+:102A80007AAA14F955DDCBBF67FD2AAA13F07D554C
+:102A90003B6555C19F873ADF3212DE752D128C4D92
+:102AA0008FB8FFB2C4EE6BBC5F0B9C076B857FAA2F
+:102AB00016FB90D5B40F89D7613BF7371AEF1FD8B3
+:102AC000BDE40885EF754DD17EE841C1F30D549703
+:102AD000B2FADB6B24BD6ED811334EF0FCC1EFE1CE
+:102AE000B93549F8F31CC8219E5F9ECBE3C9E513B5
+:102AF000F1963C5CD7E563B21BE03BF9CEE2EF71A7
+:102B0000912F0C87742C9E69E3063AFECCE28DEF80
+:102B1000F8B091F2DB05C12F983E2A8207E613DE5A
+:102B20007782B786F0BB3368B193FD57F4717F505D
+:102B30001E34A9B40F7E2704B6929E07BB5EDDEA61
+:102B400024DEFC1BE70D087FB741E0BA41E0BA0183
+:102B50001D7E12BAD8AABC032F61BA0FE5C0FD5082
+:102B60007940F8A19DD13863E4B98FF4551734C189
+:102B7000D378FF0EE18FEE68E1FE28364ED6897DD0
+:102B800080C171B98BD97E2BD6BB94C7D5B444E331
+:102B90005F27F605EA62E2F0CD497CDFEEFBEAFF53
+:102BA000583DCD8DD153C510E74F39C53D5C7F777A
+:102BB000684B1EEDDB6978C5EAA95BC94C1CAD9E6C
+:102BC000D5DAF745DEAFF517237129DF0CD89BACBA
+:102BD0009175FCAB493CFE54CD92FDA4E76BF5CE5C
+:102BE000C443058A2E5CEF609DB332690CAF7BA6AF
+:102BF000E1D44727C8E07285EB9DA7525EA828A4C0
+:102C00007CA585FB9181129C2F91F27960FECBD738
+:102C10006252A94EF1217F589D43BCC1B63228DDD6
+:102C20004EBCC1FA611DCDBF84B68E1187251D3CF7
+:102C3000EF5932FF0BC6B76313F97A87F5CAD8D1BB
+:102C4000EA09AD8EA8FB8AE7A9DAF53AB47B1A5FE8
+:102C50001794585DDC76F0EBB474F49F839D57D2E3
+:102C6000D660FBA258BF96A70E619E9A21F214CAA5
+:102C70009FD77395C1064C871F431EAE17710EA4D4
+:102C8000ADCC4EEA28D925BEB54B7C1F673F5E9878
+:102C900089FEF7837896C70C9CE1E743F4FC139810
+:102CA000470DAC0D1C76E2F8CBAD128B7FEB31C734
+:102CB000BDB570A4BDD70A5E36C01651976D656D5F
+:102CC00079F6DE4F1E277FD46256C8BF0E74341AC1
+:102CD000D9FEB21AF17CC6C87CA856F0B7F67BF6CE
+:102CE000B55E4D127152F012D7C1F2DBC163B2DD95
+:102CF0002431FC7E353E122791FFB41D8C637A1E71
+:102D00003C615529CFFF5CF0EF92D8776F2891197D
+:102D10002EBA59BCCDED7A2B83F44A7AF0D23E4AD2
+:102D2000D75B533C6C9F4F65F654BD5BA6C3BEB0EA
+:102D3000FC010BDB0BD5FA1ABE3E812FCA35D9E850
+:102D40000ACBD5AEEFB3B947B11B493AC8F4A69345
+:102D5000A2EB5CDF7EB9528DB0275CCF6AF26FFBCD
+:102D6000053F403F944C7EB9334961F23504B99E2A
+:102D7000759DBCC5F72FE7FB3606F6FE11F7CBFCB9
+:102D80003574FF72BA05184FBEF25750FF910C9977
+:102D9000F9A9473EA8CA8288F783C4EB719F6128CE
+:102DA00099D5C327744C3EDF89E1E48956F283CD7F
+:102DB000F3ED79E4DFB87F389261D948FCF6D37B34
+:102DC000C786E75998C4E33CD07A53289B7991CFC2
+:102DD0002BD6BB0596321CB6089E75897C14EBA6D3
+:102DE00033648FB175D3F5F2DD88FA8D3D7F79AE0E
+:102DF00072F247C883C2637A3FD5EBFBCE723FD1F4
+:102E0000D0B9E1775407FBCE9B80FCC4235D1BB295
+:102E1000280E83D73B95F2BBCB5D0F4E65FB97D257
+:102E20001626979FE44BA1BCE97432E543B59DA7F4
+:102E300093595C6F9FFE02E5499817DD41D7315FDA
+:102E400061FC2BEC2966FCDB77BC3829930407B7BF
+:102E500085E6AD3DA6AF247C6A8F15BF5741F94B7F
+:102E60004F19CB93B4BCA888EA71CA938E4D8CCA13
+:102E700093FA057E8307E2D8FE8704199C3F303120
+:102E80008A3F356DEFB07CA2A643F644F2E8DA73D0
+:102E90002E3DE38DC1A5B0F91A029287F1632F6F21
+:102EA0006B3AF6B1F5551B024CDF0D2D067EBF9532
+:102EB000B7004DEC793F38FD84C77B7409F5506E3F
+:102EC0005427D0FEFABBE9BCBE88D5C77617DF4FC2
+:102ED00078F79CF766E2CBBB73BD59F651E2861FCB
+:102EE000CA78DD2D09BCDB0C2CAF8C1DB7CDC5F726
+:102EF0007B6C491075DEA8B5F52ECE9F7223DFA737
+:102F00008ABD7FAB8BD7CDF8EF191DF2E26485C186
+:102F1000FEB4A827C6A1BFBD4BF8DB65771A58DE03
+:102F200071529C33DDA5F9DD121EBFB5FDFE253BB8
+:102F3000E1492CFFE14BC863E7604B3CD17EEF6E6B
+:102F4000915F2D5B14735DE453777F4F3E35C3254E
+:102F5000FCE16498CCEB06AB85F645BFEC36D86552
+:102F600026B73AB1327FE43A357F73449C0F75A39C
+:102F70001FA4B621E743B64FF5EE8173BF71303F12
+:102F80001A07197CDF91EDD7D75E67BFBEE19A9D26
+:102F9000FE308A779A9EFA29CFCF1BA9A7A502EF08
+:102FA0005AF325233BB7844DDB7572F89CD264F04D
+:102FB0007A52711D868EB9213ABF6CC831B17CA995
+:102FC000FF7649257F8F72A69922FC7DFF389E7F70
+:102FD0003DB25C62FBC207723E6471BC36D46B24A6
+:102FE0005E4D6E5BF324B35F3F9CA27A49D3E762E8
+:102FF000338F9FD7F4A8AD976E2AB43EA79FFB6589
+:10300000176B693CC5CBBB447C5C5C12ADBF2CE844
+:103010005D40FB23F77824962F5D4FEF4B574C7B99
+:1030200087DCDF8DEAFF9F5CDE875D64EFBDC3CB8D
+:10303000697FF7DD9C4FD328BED65D87CF7E81AFF9
+:10304000CFC2CFC57C167E1EE6CE521AFB101FBD26
+:10305000C3BBD945FB4FBABFD8A600CDD3F7AB7AD7
+:1030600089F4030CFFEBD9D13631EF36979DDB8B1A
+:103070008B9F0FC5519FECD9A04E203F0179377629
+:10308000CED7B0FF6801E969E0C0B10263843E2F8A
+:10309000D5A33FA0F8D2792859B146F24D27F8A61A
+:1030A00067AD242D1571339A7F97887FA4FFBD8764
+:1030B000EEA2BAB0BF6D994B5222E26AFB49DBA483
+:1030C0008879FB83321B8FF5D8E4BB1322E57C9211
+:1030D000C9D91FE0F301F44D5E961F79BF919F1B84
+:1030E00099FB188F9FCADEC4CEDD351EEB81F3B885
+:1030F000AE6309B03825D61D30E20FAA33BA4C2A88
+:103100009D53D07EBB23C24E8E0A9C67627140FCE9
+:103110009C057E99E69D8933DE4B7D3D84E84C6EAF
+:103120003684647EDE3D0188D73304AF67EA430707
+:10313000A402368E9D4B95422F1B772B0CB1D603E4
+:10314000763DB565E0666D89397407B993BC4080FA
+:103150007D97144AD63B2E98D951298CA6BFF0FAF8
+:10316000F57041E3290EC6A487EDE3C78E1B1676E2
+:10317000EFA6DA82F4DC0F6C1FEE16E893E925B3B4
+:10318000F5B088BE27BB450FE6789477EF611DB395
+:10319000E7AE3E45257FE64E12CF7D86CF617FA606
+:1031A00087DB2D8520FA6E455B6F2C0EA5381FED51
+:1031B0000BCED463E5CB700CB1F7DD4682E3BAE702
+:1031C00082A2A7FE1F5DE9623F85D769F3449DA6F1
+:1031D00033FB191E7F12F191CE736C384F69930443
+:1031E00067E97C2693AF579BBF14B3C1C4421ACF83
+:1031F000E31B6D859F75F2731E1B3B9F9B6F27BC66
+:10320000A450B2EEAAE5C6711D4C0626B7EDFEA18C
+:1032100081C78BC3E75DEEE0D1B3F45D8EE4F1B01E
+:10322000EF7ADC666B88F27364C7A5C8BCFBAA6B37
+:10323000ED5FC9DE25C5CEF0022F28947F8C0D7F6F
+:10324000EF025793C2DFD3108C1793C3E7FBDAF773
+:1032500035BBD5A58A0EF5B2C26576935E0ACD69F7
+:1032600045540F36DBBD7F75B1EF6C5A26B1C9F4FA
+:10327000EAF4CA8430DF2DE02921BCB5737D49E82A
+:10328000EF7AE7F664ABC4730BBA7DFA2EE819B493
+:1032900017B373B4EF8FF8793E5AA142DF1DC11303
+:1032A000F314FA2E609BC3EC7E5AA2141FD7670951
+:1032B000AFAFD1CCBF276834F3EF0260EB74B67FB9
+:1032C000F690388F68B4EAB2A9DE6A84783795F44C
+:1032D0009ABC0F25703E3EF4DF16763E1A2BF7D7C8
+:1032E000F1DE9C31D3C3F23F2ABBCF62EE1385E7F8
+:1032F0001C0D4F5D18CF156A46639FC2F09B46CFE9
+:103300004F33A937D1BEC82A13FF7E49C30D15CA52
+:10331000486D17FAD0F0B393BE691D1ED4B7C69797
+:103320008C307ECFC473DC0CF4E544267B56217FC1
+:103330001D8BCBFF01AF6B7F8EF0290000000000DA
+:1033400000000000000000001F8B080000000000CB
+:10335000000BFBCACFC0F0A31E8143D1F8E8389D13
+:103360000F534C941182D7B3E0D78B0D5B3122D829
+:10337000FEDC0C0CCA9C0C0C2A40DC07C4FD40FC93
+:103380001E880DB818180C81380DC84E07627B20B6
+:1033900076E386E869666760E806E2C9403C9B9D83
+:1033A00074FB39241918A6C822F84F806C4505D241
+:1033B000CD19C54313F31BA1F235B451F9C1BAC0FD
+:1033C000F481A446539B34F34F01F59E36C22DAFD2
+:1033D0006E8ECA97B344E52F3343E55F7487D00000
+:1033E00093DDE134B803000000000000000000009D
+:1033F0001F8B080000000000000BC57D0D7C54C52C
+:10340000B5F8DCBB77EF7E6F361F840D24E1260410
+:103410001230C125060C56DA4D0405451A502BA86A
+:103420004F970009C857502A69C57F2E49080102E5
+:103430002C186B50C4E553ACD006053F5EAD5D1053
+:103440002DFA7C362A2AEDB318104129D014A56C28
+:10345000DFD3F29F73666EF6DECD6EC0E7FBBF7FF3
+:10346000FAABC3DC993B77E67CCF39676665D14C14
+:10347000D206107209FE7E44C81813216444B42495
+:1034800015AA404612F2532BC13FAD5F6CD9584785
+:1034900048D842486426211D4EDA51AAB192425AB8
+:1034A000DE7EB348D2094982F715429A849A4303D3
+:1034B0004B0851B344B29D3E5A9E393929E04C3CE9
+:1034C000EE2E3EEEAFEAAC58B6D779B07CBECE8BCE
+:1034D000E5DE3A8584F30979B1AE00CB97EB7CF851
+:1034E000FC5FEB4AB17CB5CE8FE56B75E3B00CD7D2
+:1034F000556079A06E0A9607EB02F8DE9B75B3B0B3
+:103500003C545783CFDFAEABC5F29D3A159FBF5BEE
+:10351000D78C65475D10CBF7EBDAB03C5C17C27E09
+:103520001FD5EDC4F2485D3B3EFF53DDCB587E52C4
+:1035300017C6F24E924C481F42EEB8E382751A5DF0
+:103540006FFE538BDE1F9F46C8DA11A20FC095FF96
+:10355000D4096FA030BAEEB5DF9AA6B4C781CB4FBD
+:103560008880E3AC75116C5FBBFF8F44292264CD6A
+:10357000884EAF4AEBE3F977866C3F6C9D5618EDA9
+:10358000173BCEE7C4C4C631D376DA6FF006D65FF8
+:103590006B1F0FDF19116DDFD1F6BE75BA53DFCE89
+:1035A000DE7F66E3FB56C0DFEA8844C28877951069
+:1035B0005ADA95AEB63E14CFB6231662C9A1F857B3
+:1035C000DA49271D67CDA85F84C5125837EDA6C01C
+:1035D0003A3F20028583EA22480F0A8C716DF43B42
+:1035E000D71211E791FFD461F69DDB2F60F9DA3F26
+:1035F0006442E87B6BEE10420E3AFE9AD1E7BD7E44
+:10360000A037F55913D01B92AB02FFE9F456D0B1A5
+:10361000D78EFEC8AB5238ADFEF68329D381FE8625
+:10362000131F7C6FF5FE578802ED455D08BF06BE8F
+:10363000EED553A70DF01426A64B4A49442CA5CB32
+:1036400075127F280E7CFF058040E163F284704D87
+:1036500076DA2F1E1EFE85C8D86FB5ABE243808B8D
+:103660007A87D9B79DCEFB065F989C7446E70DF527
+:10367000CF68DDF97598985C30EF2FBD26BA7E478C
+:10368000A97C8D8DCEC6D9D57504DE775E5FE587C2
+:10369000B5AF19DEE9ADA2FDAD051DB85EE223BEF2
+:1036A00041745C7B814AA617021C4C88D7D8F94C20
+:1036B0000778F7013CFDDD0B38D1E8F0C3DB3FB004
+:1036C00056EAFA3FA3D187C0E88BB484AD935CD1AE
+:1036D000F6A7B4761BA31F6235B66F88A1639299D3
+:1036E000A0DD4C018DF81243DB0584BB757251CF10
+:1036F00079B784DF423E70FAC2D6409C75513EB124
+:1037000082DC492A117D00AF35A329BF1446D77941
+:1037100039BE6BE670595D32D905E35F4E6E15B563
+:103720008B245CC06526FDFFD52FDBE9CCA3F5E13A
+:10373000E11443FD9A43FD0CFD4774E41ADAAF3DF2
+:1037400032D4D03EAAB3D850FFC117D719FA8FEEA2
+:103750002A37D47F14B9D9D0BF8CDC66A8DF60BD0E
+:10376000DBD07FAC67BAA1FD26EF1C43FB78E541B7
+:1037700043FD9682870DFD6FF53518DA7F5CBACA76
+:10378000D03EC9FFA8A17EDBB8270DFDEFA8D86AFF
+:1037900068BF73CA7386F6A981170CF579F6C05114
+:1037A000C0CFDDB37E6378EF5F6A5E37D43F2464B9
+:1037B0005C3CFC1281C9194A419E9357F1FE54C4E6
+:1037C0007980E6808EFB303A2DD89C404EF2F66729
+:1037D000B7BD6F9D6990936646C719AC7D67E8FDDC
+:1037E000F8EF67713E211DD6C92E7D3B9BD755FF53
+:1037F000A0F215DA25F53BC95797C787FD35B94AB9
+:10380000E99B90EB287CD5FEAA8ADFA3E351796976
+:10381000624B26B584C929421EC4E79ADE27992443
+:103820006CA2E336B83237AF0498D0B1A534A817EC
+:103830006E81BAA8F849671CB89A3CB2014FB1F042
+:1038400025CE144ACCBDC95915E1A78E2505127C99
+:103850005FB0FB96D2F54A24D04FA0CF2F8A012F1C
+:103860004C7EB149FD7D2027DA7FE968FA4FE87F79
+:103870004C08D5637F05E1D85044FCA037D40C39FF
+:10388000B43D07E1690179A2BD471F289D6CBEEADE
+:10389000A581863A9BEF65EBDFE41BEBDAB83F3797
+:1038A000C293C219EAF7F14A8F75FBE428DD9AA0AA
+:1038B0001FAB2BA2402EA11C34B66BDFB968730F6F
+:1038C0002349148F56562EB6BBB74079D1961D2288
+:1038D0006E420AC54039C04D2D67F0518F3A420DF6
+:1038E000385ECDB5154500DFF8F60221F58C3F3E78
+:1038F000192FEAD791086F0D60B7E5EBE820D38761
+:10390000729CAE1AF55B6CFF3B05998DEFA4A8A2E3
+:10391000E35B08A3B12453E04E6104ACB68248389F
+:103920004F1FA9407C8D2360975A3578066762DD6A
+:10393000C9EDCCFDAE91470214CFABFDB20FC6AAC4
+:1039400014148E079F17F480A554242B696DB5F2CB
+:10395000BE15F8A33947CE00B96E916A8887D62D77
+:1039600079940FE2E89105DD72E211722576712CEF
+:103970009E0AE8EB6C1E04E1A8CD3F98D561CD0509
+:10398000BA1C4DED623AD5B5D7F7AE5F9671F8AE79
+:1039900002BB98966B94C94904F9964C05FA6ECE11
+:1039A0004917914F399CBAE192F39115F874057F4C
+:1039B0007FB5EF7DB4D357687A3C068ECDC38F2395
+:1039C0007CA6094C1FAF2AB24F09C581CB34C18DEB
+:1039D000EDCDC05369685F31FE8AA117DAE2ADA46C
+:1039E000ED56C553BC928E3FA6489A0A74E12A252B
+:1039F0008A05F9D7EFCCA0DFB7F3DE92221AE4876D
+:103A00002B8DD1ADF51321A4D0FE4E2FFB9EC549C1
+:103A1000427E7C7FA1012FF6D2C004328CDA49FFAE
+:103A200030E17B748ECC8E383C1EF9D1EC61EB24F6
+:103A3000050C4F1EFABF4BB9743C4536E88DA565A1
+:103A4000B22F4CBFB3D8ED447A32EBF14ABFEBF85A
+:103A5000F6850A187F79E603F6A574FC8B654DCBD5
+:103A6000812D4D9F8CFF12F8CE14DB3F6BF21F06A9
+:103A7000C6E103AD7474BA49381506B8A7573A7051
+:103A80007FB2F9ED83BA79BE2AB8D250BE5E4BAE92
+:103A900045B97099F72FD685DE3E3808E1215E09D9
+:103AA0003D2F8BE1EBA61C4D6FA9DE493ABBEC82A2
+:103AB000C0F41A51CB10CE12E7E7A6D1A40BECD676
+:103AC0003539B2524FBB48A572184807FEBAE8F71D
+:103AD000C1362320AF95A60EF6FCA706B9B9A2EF12
+:103AE000445FB817B8497931FAE632EBAF05F8E927
+:103AF000FA9F00F839A2F0B3908AA430D04B709CA2
+:103B0000611FBBBCEC21254CFFB9BCDF2FFCC78873
+:103B10000E8E3FA27CA8E30F4B6688E8BFAFC9C5F5
+:103B2000DB447F17C86193EC4339457265DC8FC471
+:103B3000CEAF4064F2260A67AB4474FC4126841081
+:103B4000EEF4AFC29ACEE147FF6CDE37FF01F0A37F
+:103B50003A3AEC1886CF1BA5623A9F34A23AAEA639
+:103B6000EF4B44827A9698837C4BDBC7C829C0BF51
+:103B700037FA400E36F17D1FF16CF6EAEDF22C912A
+:103B8000E135DA1EF2DE616867F64E9366D77BB6E2
+:103B90001AE8A2FBFD641277FFD14764767696E8B7
+:103BA000E1F4B315F76F2BD22644000DB68C1B7DC4
+:103BB00095C0AF1E8270D0F484A617A8BEC812FBB1
+:103BC00044C793F32A8880ED46FD9B505EC7E85DAD
+:103BD0005B81510E10BD3D930BFFCDF420BD90587D
+:103BE0007DCFCB8A9BAF88AF7AE84B127FBF384935
+:103BF000647298A869B87E8DAF08B727CC1A5D109B
+:103C000046AF6EFE5D19E63310F01CC2C11D745B39
+:103C1000057517A9C1FA85D2E230C0C922753613DD
+:103C2000AE1FD59C38FB28EE8749B48EB5A3E3EBD5
+:103C30008732D18DF834396B4800E9F81EB403059A
+:103C400035402EA13D18E47AD5E7053C2EAFAB25D3
+:103C50009FD1C5D80F8CC7FDB994E9F7C3FEDE0428
+:103C6000449041FFEF2C61A5E453F4F4D98D47B2A1
+:103C700014C73353B0C03ACD4EEB34D00366A767B8
+:103C800012960543670A5026DD582B225BC5A727ED
+:103C90006D3C4A57B344182F2D80FC2C792AB02450
+:103CA000CE34B45F697FA522EE3C381DF07E09E971
+:103CB000AE9B6E343828328C174B4F361FDD308860
+:103CC00058ED80F9A6F3F9A6DFD3B41040EC24AA8E
+:103CD000753085517AE734D47B4EAE7F1A0B8A9BC0
+:103CE000CB693F772149BE9196B6BC2E9C3FEE6BC7
+:103CF000FBC178772F2D43FF07C17A637D4519DB20
+:103D00001FF863EC565191343ACBEDD5DE112E59A4
+:103D10007ABE9F68FDB1FA949007AECCBE9AC2F805
+:103D200051A5FF037EF4101D7FD271DCD71BF581F6
+:103D300033E63BBF025822BC17FEAF7C2F89D45B11
+:103D4000154A0A6645F484289E286A92611F65F325
+:103D5000D3FD1DB4A775FA45E5F27869847D6C2121
+:103D6000A3173DFDBFCEE56BDF7B171D5B46C7BDCF
+:103D7000E073FAA0573A15A7A9C53DD7B33246EE6E
+:103D8000AC2C588F74D140E92817F6070522EAA514
+:103D900066658B47EF57F95C93433DE88328D2482B
+:103DA000BE9FA4F03129A2DFE6FEFEF4116B3F5D59
+:103DB000297DD8A718F1F15DF175FE3BD2C7F7FD5B
+:103DC0009E86D744F28CE215EDF1CBF99F7AE2B5ED
+:103DD0001EE5AE4D89EFAFBCD88D4FB56769F0A732
+:103DE0001AFD02D6BB9BDAE2D92D5A69BD2776FFB0
+:103DF000CFC6B5D59A941360DF4A1EC33E6885B21C
+:103E00005E057BFE02D8E5601F06CBD03F4CF298E2
+:103E1000BF160610815F147F88ED6F4244AF07E53F
+:103E20004CA3DFCD946637EAEF29AAA09FBFAD5619
+:103E3000C67958E17B69E8CF0DC1774D1E12B6B93E
+:103E4000A3F40A9F62FE8087AF880E347A05339808
+:103E5000D1ABF1BDE599C5241EFE7A7CEF76E37CFB
+:103E600013CAA5D8F79C92725267A7247E4F2227C7
+:103E700075F64EB916F7E178A276DECB42129507B9
+:103E8000DE9F9000856F133465807C22A8CF9ABC9A
+:103E9000C52817C84E2166DFAE30FA5152B0BF6850
+:103EA000657A53AB279E0FFB6E348EA4E0BE36516D
+:103EB000FF86BAD2C724AA8C1CB5AFB74A148F8D1F
+:103EC0004BFD532A707F7BA8551A14ED37CFA4ED14
+:103ED000DBA9FA1C19A56789D07E0837915CBA0660
+:103EE0001E7A883212A0C9E99B74603B7DCAF148F2
+:103EF00084EEFD0C1DB20DD689FE8923D80F06BABB
+:103F000084FEA64E56A72F427D95D9EFC779494129
+:103F1000EB03145EAB6CBCAEF07A32AF7B783D87BE
+:103F2000D7C97AAC3B645A07FE35073D58B7F37AD8
+:103F30000EAFA7F07A32AFE7F2BAB01EEBAB643641
+:103F4000DE4A29C4C6B7F3BAC2EB29BCEEE1F55C80
+:103F50005E275BD8F72DAC6E3787D8F80E5ECFE1C1
+:103F6000F5545E4FE6F581BC2E6CC17A42799947D3
+:103F7000E16F900F1DD13A2A110ED7EE7A674C3BB4
+:103F8000A3975481703B2C940176D3FED9BFC8000F
+:103F90007FE88663D77A613FD670AB464F3E949FE9
+:103FA00024F3169463197CAC86195BD00FD1304B87
+:103FB000C6FD27E1FE99687BF12185B65F08883E42
+:103FC000A09B2792E3FBC97E51C7E295ADDC4E5E14
+:103FD000C7E3956B215E09FE161EAF5C05F14A0B27
+:103FE000D0A90FEBCB215E990FFB6B16AF6C8078DD
+:103FF00025AD3F07F14A5A3E0BF14A5A3EC3E395BD
+:10400000DB79BC722BC42B69B919E295B47C9AC7D1
+:104010002B9FE2F1CA2779BCB26D46F15B7930FF84
+:10402000B96CFE89F0D1778A517EF6A930C62D523F
+:10403000C6A418DA3DD71BE316EE925C43DD59683F
+:104040008C5BD8F38A0DE35933AF33B4CB69E58683
+:10405000BAE434C62D0A774D36D4876EBBCB502FC9
+:10406000D85869187F70EBFD86F6BC96070CEDB941
+:104070008D3F37D49525F586FE4F9A7291BEB217C3
+:10408000AD34F4CB9CBBDED06F9EDD7FDA04F26EE4
+:1040900042DA15C937F2B59AAE9797B1FAC1944D85
+:1040A000FC7ED4734C1FA18F16FC6A59CC7F65FD32
+:1040B000E4A643B07FB1E4313D15EBAF8A1D4F76E6
+:1040C000EE38A2D2EF94B90F793B75FC48BCBAF731
+:1040D000E85293242627573EC2F6E72D8FC4DFA768
+:1040E000A326A0EB68F9363E1FB82493418F68FBE6
+:1040F0009A964704ECFF7DC7D7DA63C78D7E8FD2CF
+:10410000DE48FD7E38C4E7437584CE5E3077264FA7
+:1041100027A8E7D97ED9C4FD3B65134B8F35527E66
+:1041200059E6213E0BAD2F7396FB995D42AD73C0EE
+:10413000C5925B715FAFF5D7E6D5E89CCCE40BD1B7
+:10414000F92D514ED90D7E856569BDDB6F72C48432
+:10415000FE3F53442061AA9764A9625C0E9D8F7C48
+:10416000D8E45B4A503FC5F50F10B29EC59DBD46D1
+:10417000BF69E38C18F9C7F332CC7CFE0D69E5F812
+:10418000BCD1D3FBBC2C302F980F9F9739E2C0D203
+:1041900014B1E17C474552B15E1A49C6F2DA487F54
+:1041A0002C474632B01C11198865492407CB6B2275
+:1041B00057E17BC59121580E8F5C83CF7D91E158EB
+:1041C0005E1DF9013E1F1619856551E4067C5E18D7
+:1041D00029C3F2AAC82DF87C68643C964322B7E153
+:1041E000F382C8242CF323776339383215CB4191FD
+:1041F000E958E645A66139303207DFCB8DCCC632AF
+:1042000027F2203E57220BB11C107918CBECC8CFF7
+:10421000B0CC8A34609919598A65FFC82A7CAF5F8F
+:10422000640596199147F1B937B20ECBF4C8062C44
+:1042300093235BB1DD13D98C6552E4397CEE8E3C5F
+:104240008BA52BF2023E7746F660E988FC069FDBE1
+:1042500023AF60698BBC8ECFAD91FD585E0E4F973A
+:10426000B3834B4F18E3CF233F31CAF192C3C6F853
+:1042700073F13B4639EE3B688C3F0F7BD5187F2EA0
+:10428000DC6B8C3F0FDD6594E305DB8C727CF0C644
+:10429000BB0CFDF35A2B0DEDB92DF71BE574A351A3
+:1042A0008E672FF9B9A17FE6A27A437BBFB92B0DA8
+:1042B000EDDE1946F99D4E9E30ECD33C63B618F501
+:1042C000DAF5BF34EEDB4A9E8FD9D78450BED80BC7
+:1042D000FFD5F09E35EF408C5C56997C8AF1B70390
+:1042E0004820BEB998D87DB0AF89C5670A9707A99D
+:1042F000C077B44CE37CD707F88E9629B7CCF5028B
+:104300003DA44E2C9D0676CCC5638202BE3261620E
+:104310006D3EC47B52FA138CFB1275C80D7E5A6F2A
+:10432000CAE075FA44807A1661FE06B2B41CFC6CD1
+:104330004D39ACFE56E39272C88B6932F376B5B153
+:104340001CDFB7B1FA91C619F5D09E92E4EBE7A352
+:10435000EF6D35C797D79F4A2CBED75FF2FF41A2BA
+:10436000EBFF6B59E743E097FB776BE003893E9FD8
+:104370006B0D0C80D0DA5973E019501DB982FF30F3
+:10438000F42B12FC1F4A28B78D7ED609A038E9F31A
+:104390001CC9FF4768D7D6DFE4EA7D1EEF72BDD4A3
+:1043A000944C709FA93E26F3BC1282FA52F36B3DE7
+:1043B000EE70A3BC5FFE98BC05E252E6CCF4E9E0E7
+:1043C0004F833F83FE686D5A087E762BE8A18120DB
+:1043D000E5DBB174920E2CDDA40B4B0F64120C8C38
+:1043E000AEBB7BBD596CBD140E5F4BB88FA8C1FE30
+:1043F000F58E89A5B01E0A870B1C0E7F97FA2486BE
+:1044000003FDABF08E642E51B4277609067F6692C9
+:104410002940CC3C8E0ACE998C193EDC8FFD49F2A6
+:10442000203D6AF0A37F8B524646F301E87B56732A
+:104430009F9EE369E320C0E0FB5C1F6AF45C9B4045
+:104440003F697E6EA2DEFA9DE24DBF97C5B8DF31AF
+:10445000493E8CD7C6BE27398DF2CFEC0C601E8446
+:104460002CC58FEBCA161EAFDA38F18AE2DB3BB8F7
+:104470009D4F1A6FBDA2FE5BB475534A80FE591A58
+:10448000D76FBC15E96E107F3F0BEC3A4A4FAFFF78
+:10449000B9BABE05E80F62D2F1FC07AD22DA835942
+:1044A0000BA9E0C989C23BB390DA83C3A2DFCD5C1C
+:1044B00064F4BF8465165F21AD57067F2DAF338B43
+:1044C00012FCBFA6F49C07D93691AD87C751A50D44
+:1044D00015CD362A7F0639593DB3B5F7F9101EB709
+:1044E000C8E47495E9E47E979DC6717B7CD7F4CED1
+:1044F000F078795E09BFF31DE38033CDF1E3A814B2
+:104500005F88EF81DA3C6AE91F9DD7603E7F6D3C92
+:104510002D1EA8D5293EAD607737B554A29DD5E4B0
+:1045200065FA9B7C43471F892C4FE2EDCB421CFE72
+:104530009BF87E32A49663FE23D965A45365A964D3
+:104540000FA0FD26A640B9B991F5CB59966607385C
+:10455000357A5252A0DC542BD6DB28DD34AAC40FA6
+:10456000CBCAFED9091B6B3F9E0C654E5BD75BF92E
+:10457000147F391ED127D1F964A8E7DFBA09CA161A
+:10458000BF3507FC704B24CC23CC6E23F602DA2F08
+:104590007B2EC17E0444209DCF931A1ED556611CEC
+:1045A000FD67664BD7521BBE47FC8374FD3670F027
+:1045B000E5353E50066C9AD7E2993C0EE2F385C48D
+:1045C000378844FB3DCEC773403B8C3386E5316A68
+:1045D000EDEB78BBA5F6BC9A0F654BE7BA9BA05FE5
+:1045E000AB719CB5BCDF20ADBDC4D8BE5A23AB2592
+:1045F000CF87611C534BD77B37C17CDA58BF6EB96C
+:10460000C5FBAFE2FD63E5C560788FFB2BF5F35C7E
+:1046100011835F4D7E84C03F900FF865FE018B755E
+:10462000EB53E08FD4FA2D17D8FE4889C9337DC5E6
+:10463000CCE46197CCFCB61A3D25A26F3257B71F68
+:1046400080B8E50CBBB17E4F8A611F48C6F433B613
+:104650005F9F6B6C2F196AAC17161BEB79D719EAA1
+:1046600017BBFD2F411BE68573FFCB60FE8D0D6DE3
+:1046700095988712F5FBF9EDFA7D4A26EFB7ADA6BE
+:1046800018F9A7C1C9F987FB691CBCBDA9B0D2AE96
+:104690008FBF6BFCD30C7E100BF85958DEF68EB62C
+:1046A000DEE1B589E37B23CFAF7982E3A98DE3E92E
+:1046B00017DC8F13E47E9C353CEFBC85E79DAFE4AF
+:1046C0007E9C469E77FE02F7E3ECE17E9C6DDC8FDC
+:1046D000F36BEEC7D9CDF3CE9FE37E9C15C3BBA68B
+:1046E00082FFEC59EECF7986FB73C670F9BD62ACE0
+:1046F000AF1FF8F7B68E8DBF7F1EC3E9E2C7E0C8D3
+:10470000EC037ADB536F06BAF4B13CEB9C5A8F682A
+:1047100029013B97D165CE2C8F2897809DCBEA93BA
+:10472000B8BE05BD827933993C6F26936A9D74EEBD
+:10473000FF85AEAA4AC01FDF778A6738B842DD32EC
+:10474000D7A30AF1EAE3067DD58000712DC9E44FB5
+:104750009247C0F86C5EF9C1AE0390A7E8EBE82879
+:1047600007740E3BD45E0FFD0A0B83109120E6B454
+:104770009008726945990FFD6F4F7F68F26D813126
+:10478000D388812EE81C519FE5F1FD2CB9DE481736
+:1047900096C826B49B9B6A587E06ED1377FFAE95AC
+:1047A000C97EA3FD90546AF483350527F7EA97F68E
+:1047B000BD6A7C7FD85EE3FEABA9D09827125B165A
+:1047C000EE1263FC5C31EF3B7BFF7E7E6422AE37F2
+:1047D000119DDF66AA2C97757912CEC80F711F1133
+:1047E0006B0F4A60E70DC4BC1A3FD8BF529EC70F7B
+:1047F000FE12294FE1A58F3FF7F37A05D6A9DDF820
+:1048000063189FE2C560379A480063222B8610BE6A
+:104810001FF967BD9F2AFF157710DC4F789AEC3798
+:10482000A84083FE99881F99E32755AE7906FC1F9F
+:104830004FAF1609E07F6B4BEFFCDB239FC2E9C74C
+:104840003852D6224F31E8BD44EFB52E12C7C58B82
+:104850008FCDE774BD6CD1640FEA8D8397CD179827
+:104860000FEBD7F205FADCCEF305CE8C37F8955373
+:10487000AB7AC7E3062EBFB47A06896FBFEEE1FCC0
+:104880004E9C2CDF44A3FBD461BD8FDF7D6E2724BB
+:10489000920EE00B2980F2B3CFED01CC8B27145F91
+:1048A0007A3E69FA76FADBC087EA3A96A748FB892E
+:1048B0007A3B4C9B4786275C2640FFFDA3307F63F5
+:1048C000B0332042DCBA693FE1DF69477BDC31A3CA
+:1048D000C6CFFC65ED04FCF68E1A9F0ADF077C61EB
+:1048E0001E5246777FD40FAB8222A67E349430BB13
+:1048F0005793FF1A9D34788B0F417CFD4289847158
+:104900006F6A5F5DBAA4ED67E87F06B7313A68EA7F
+:1049100043F0DC8D54A086811E897F1CC20DC81F08
+:10492000FE9A5C3FF1E3B99422A6FF4D70DE03FAD4
+:10493000491D7ECC830E787C90BF98D5360CF94CFF
+:10494000F2D40880DF87C4C06E3D5F999C2CFFAB1A
+:1049500029C1B982162E67FB25C0EB87BC3D55EEF9
+:10496000180F72F8E9C728FDC7C9CBF903D70B4F59
+:10497000B54EFE438112E55FADFD4F60A4E9E695BB
+:104980001591597E61DB77DB078C35139E7F647C44
+:10499000CF2C5518F6615966E3F7E434A33FF2CA09
+:1049A000E729A15C2285371BF09CDAAF77F9A9F1E2
+:1049B000FFC5AC18BB23AF00E9396A7794233D6C7F
+:1049C000F412462F9C9E343DE2EAF4ABE2C09EF422
+:1049D000B13178C00676B246671667C80F7E038786
+:1049E000378CE9823A7AF82BD04356DB4884B7AB50
+:1049F00044C5E7FBB8FECBADED2AF3C7598766DFA8
+:104A0000C1BECB5B0C5F88D9FF908A20D8D559599D
+:104A100010C303B5CCFC0B999997DB6F5D59FC5A19
+:104A20008B2767D33FD8FFBCA2E1FD8B18BF9587CA
+:104A3000AA785D3CB5EF17D30531A7271E62DF6B5F
+:104A4000F4947BE2C96FC91448B7E8F01FBB8F8F9D
+:104A5000DD6F13BE7F94BBAB8B500E5B268CC3F80F
+:104A600048F7BE7BE3445CB785E34F6ED1E2FBB110
+:104A7000FBCAB9BEDEFDAADF6F5FE9B318F34BAF27
+:104A8000383FF73BFA25B672BB35767F113B8ED89F
+:104A90001610E39DDBC86F33C23DAFC568FF0CE362
+:104AA000FC9DA31AFDC8036AFBC5F777F27CB5CA63
+:104AB000520D4FCA9DFF41E977F62133E6E16BFBCA
+:104AC00060CDEF349BE7AD55F23CB619A4C20D8D15
+:104AD000678988E777CE92F7DDD7E8F8A6CAC2CE15
+:104AE000D19166F371387FA1E567CD0CB2BA369FDC
+:104AF000EA3663BD8A4C4E07BF6B55AB99403ED634
+:104B00006C221DEFD4E64FE9F8271696875A4D6AB6
+:104B10009A40BE2DE379AF951E22A5A61032EFA5CF
+:104B2000A746C2799E7916267F4F53F82B3A7D7D92
+:104B3000BF3324037F7FB6F79A9FFC80C0FBA1A6FA
+:104B40007EA03F93E39F8398DE6C9CDFE5E61F3BEE
+:104B50005FED9C46A279483B85B8F93F0F6BFEAFED
+:104B60002B3C47B215826223129F23B9DCFB3B2DFD
+:104B70008C7EFEBBEFEFFE9EEF3F7F99F9CFB376C1
+:104B8000DD8879DE6935152057B57C96F924E00774
+:104B900057BAE9D5496A7F45D7CF7B85FD32693F52
+:104BA000D315F4CBEB7DBC739CCF7FBF6BAB0CFC00
+:104BB0007BF697C726823F70CE6F4CC44AE9E0DC93
+:104BC0002E173F2F169241EFDDBFD7E40F613D3C1A
+:104BD000F2365DBE206616D2F1E7FCDA85FEC4FB34
+:104BE0009FB78426D0F7EF7FF1B36184C2E15C7D8B
+:104BF000D79BFDC10EFAA5C0F2AFD4CE61B7D1E705
+:104C0000F74BE4BE8A387AAB83F3C199571C5380C3
+:104C1000CE849DFBEFC571DBEF345B74718DDF5B80
+:104C2000CC087FDA8F9DC77A56080D12D8FCF4F9AC
+:104C3000E25ADEDB99670536BF97CD211BCC6FE7C3
+:104C4000663940FB2DD8F937A4EB1B7EBDDB0D7018
+:104C500058F0B2C9207F16EC34852DC3B03C6641B4
+:104C6000FFBDDF298C047812D457F3F7CE9B00F4F4
+:104C700030BF7DD5DF4C6E78DFC85F142E78EE63D1
+:104C8000CEC726DF04A8BFF08C1BECD9D31DDBDD1B
+:104C900000573AEE3499D2D50FBFD6F12161E347E0
+:104CA000527A8E071E1BA0AF05ED2BD8F7F6DE7AE1
+:104CB0000AE4DB82183E3E0DFFC8E8A93F2216A396
+:104CC0005FF202796724D81D64676ADCFCE26EFD3E
+:104CD000C1F97ACEEE0B9BE03CF199E7FFB209EC0B
+:104CE000FBB9FFFC6AD3C3E01778CDE60179B4E0E5
+:104CF000971FBA890EFEA95666CF9F7BF6991D4F66
+:104D0000503E39F7470BDA3BE77E7B2A5BA1EB3F4E
+:104D1000B7E71FE970EE76D16FC7F605782CDA7722
+:104D200043DFDEF61B40B7218B1EBF21C4AFF2323A
+:104D3000FD4E5F020758581983A7D7F7BE9E0DF3A3
+:104D40003C7BC482E76F16D067B5C580B779A81FD2
+:104D5000A0BE84C27BFEAEE57F330D8B0777B5BF67
+:104D600008678548B83FF102DE6FFBF1E81228CDF5
+:104D70003E05C6235D28DF63DF5B7098E2F7EAC477
+:104D8000F8BC40BE9101FE0B76AD60DF6DA7F874F4
+:104D9000F7C4E759F8C7A89EF82CB6C6E273EED35D
+:104DA0004F40E3DED4B879241A3EE7EDBBA357BBEE
+:104DB00041930F9783F32C9E37F54F8BBFDC0A7C12
+:104DC000F6BC43F5323C8726D0B673BB2F64134A3A
+:104DD000275F98BBEE0539D9F55B8B670B7D7EFFAE
+:104DE0006F3F46BE3BB7EF3D5961E74F9C02B52B85
+:104DF000CE91EEBF0EB033E6F3D8DA826DAEB0C519
+:104E00001DC5D7FCD0A4718A1B9F1FC3E721C60F05
+:104E1000F343FB6F17E2E06F893597E9A7501F84D2
+:104E2000CB3CD221C3F97C3D5E8552C0E7B11B81EA
+:104E3000FE12E1535BBF07D67FAD0EAFDB181FC775
+:104E4000F69F4FF915E4700FFC86848FA13CB7D90B
+:104E500022417EE4391E6F8CC57B14FEFCFCE47796
+:104E6000B4171FB226884370385C8EDF2FB7BEEFB1
+:104E70000ABF195605C78D85E3996FE2EB83F55C90
+:104E80007ECC2735E3FAE9F499C54CF5590ED87B69
+:104E9000156A7F213ADFA67613CAF9333B4D21D03C
+:104EA00017B1F2627E827D72C8CAEC97F92FEF1FAC
+:104EB0000672EDCC8157385D32BA9FBFEB98AC7269
+:104EC000FD10D2EB870471CA5FF2F116BC1A7FBCE9
+:104ED00005BBFE1677BCD392FF4E98FFE90E335107
+:104EE000E910A7DB4D71FD49AD56B331CFD635F290
+:104EF00048127DCFE4B62BB0EE867AFFC72AD825BC
+:104F0000EF9BD1CF4224DF17163C6F6D575652B836
+:104F100035B8ABD0AFA28DD7180327C95BA10A253E
+:104F200070FEABA284D9D46CDE5ABBD9231AE64DED
+:104F3000F56E26E8A5A3C34F99619D9FC6D88F9FA4
+:104F40004AA4A92F1DEF5355F02D55E2ED178DE31F
+:104F500007969888A2D78796AEA3301FF23B1B0115
+:104F60003FB2E9359B0AF264C1265B08E29BAFEFD2
+:104F7000BBB803E076EE690B8F77B23CDB6ABE5FAD
+:104F80003BB5EFE2A6FFA2EDA7E065FAFDEA4DB45E
+:104F90003FD8EDBB1C98F4FCD7E79386112AA7AB4A
+:104FA0007FF7F044902FD5B0C7A2FDAB7FDD37D49B
+:104FB00040C73BD987D54FEECE0A015EE6BEF0DB97
+:104FC000F9A04FE6FCCA4180245FDFF7F1BD503FF6
+:104FD000F73B17E67B9DFBDDA91F021F507B5BD1D2
+:104FE000EBF5D9FAF3DE74DC395067EDC2255D1EAE
+:104FF000C11C2829BDCF7939C90FFB715D3F7C6F7A
+:1050000081A5EB21744011B59F887BA2703FE0C35E
+:10501000393B8DDFFBAB95D9530BE4AE2AD63FD895
+:105020008FF16B07BEF78D46A7BC3DF67DADFF7FC8
+:105030005A7363C661EFCFB7909A78F46FB1B171CC
+:10504000E7ECFC36DF381EA3D79EDF61CF7F2AB0A6
+:10505000FC7CB2C786E77FE7CAE1C129945F5F9411
+:10506000C92CE0DBB9EEF0E064FABDDF707939D726
+:105070004EEBF4793F3E0FE80F7562EDFC15E077DB
+:10508000DE4B3602F43EEF772EF42BCF7BF1E2C9F4
+:1050900027E9F333FB1C98C73AEF778B11DFF32C2A
+:1050A000E17BC18FD3B5C782FEB1337BDECA067BFD
+:1050B000E48C399C9DD28B9F685EBB853B2F8CEB2B
+:1050C000A0FB82821A27F839595E4E2D61F70ED463
+:1050D00042E207D0F12736160FE1F1A907B8BFE881
+:1050E000FC0C2509E77FFD2DEC398F5F3F70ABD2BB
+:1050F0003759370FC89B23D7D07D895C930F72D661
+:1051000014B98528B42E450662A9F533C1FD0DE01A
+:105110000F4D2368BF9BD37CA49A968B534800CF36
+:10512000FF386FEEE6B33F50143FB041E90BE3F9AF
+:105130006C4CBECCB3FB47DB306FC478EF82BA8FC8
+:10514000ADEB22BF4F2176BE17CDAA05E479346EB0
+:10515000C7F2066B25E563F0FF92435C2EF5583FDE
+:10516000E3B3F39E14E4336D1DABEA3C284F56D4F1
+:1051700079B15C5E574014CC77F661DDC4E16129FA
+:105180005409F8578107E1CFE2ACF0C37D16302611
+:10519000C4534DCE00D297C55B83BE022B8F8B9A32
+:1051A0009C2AA976429E078393C959817092795DA2
+:1051B0006A9B8070A5EFE3F3B1F6C00CDB08C83F33
+:1051C0001E6A9053725AB1A1DE036E1A5DECFEDFC7
+:1051D000861F4178ADA8B36209F9E20037C8178786
+:1051E000FAFF07F8B530F85D47141DFF40FEB662C0
+:1051F000E0A704F0DB40E19716E5AB5838D4F23C69
+:105200001D8D9F12F12FE4DB4310667D5D1B96DA46
+:10521000F394047AFDAC8DD923B524B014E3A11E18
+:10522000E68721692AC9D4F99F8857C5732078DE9B
+:1052300014DA336F41FFA5865F93473A69947FCABA
+:10524000C7B09EC56F9B459057A6DAADE4335D1C91
+:10525000DF34A1C2A6209C7D02C4351AB87E5DD67B
+:105260008D4F237FACAA53B05CCDF9642DE79375C5
+:1052700080775A6FF0B1FC9F967104F5E763B4CE66
+:10528000F6FB61A2F78B27FBDAC3668A7F94490A93
+:1052900096EC1E8E2396D020FA9EA390603C23F9B4
+:1052A000C8CF42B856D28EE7AD93B57B605ECD4D88
+:1052B0009E8A712062667A8A98581934C33E2A16EB
+:1052C000BE0DBE0378BF44A2F9941D9D2DC0F72EDC
+:1052D0004E65B1B3B47BDA8FC07D10CE16073BA705
+:1052E000E8AB19908DF2D582F4EAF405846A1D1EAC
+:1052F000D313D87F4BECE3FF03E8F113C84BA4F8BA
+:105300005DDF3610F35A5699DBBD200F57F1F31AC3
+:10531000CA140A05DDFD626F7039E92E31CA014DEC
+:105320002E7BAE2F36D0B3267753C618E95E93BBDB
+:10533000BFEE96BB156741EEA64636225FC6F24128
+:1053400083595685ABF13E1AE67F3A26B0FB327A96
+:10535000CA038CBF9FEFCCD902E7B135FE895DBF90
+:10536000D43C1EBFD36D0F26C87FECCFEF6568A677
+:10537000F446F2215F414144ACA174066590D21914
+:10538000E3A7522C353AAE274C86A87B45364FEE24
+:10539000AFD5CEE2D45B8BFD80C765ED8C87B2ECD8
+:1053A0008CCF96A589A0BB8844F7934EFA48DA3F84
+:1053B000CA0AF6A56466F1FC2E97D80EF1DC65CE1C
+:1053C000C956C82B15924B907EFEEEAA1CD05B7C72
+:1053D00007EE5F03FAF3387DE438EDB78CDFEB645A
+:1053E000F21413D897EE7676603E94D32E1AE249E3
+:1053F000F3EC815CBBAE5E045FE77887617727B82A
+:105400001F6A185F0FC954499E4E4E74DF97A4A8B7
+:10541000A440272FEA07DD88F731F5941309E4E16A
+:10542000F6FF1979D83020847835C7CA9F343FDE1B
+:1054300001454B15AE56A0D6F9B2BB87239DDE6061
+:10544000877D88734BB71DF4A3DC9EF38C957F5149
+:10545000BDA6A01F8CEAB5C74B419E26D46B35F77D
+:10546000211DB7F457808EF7AF79F869A87FB6C6CB
+:1054700082F7BE5445561085CEB73A320ACB596DE5
+:105480008F6259D9B6993211214B5757AF990AFDFE
+:105490003798D0FF733274CDB95A5A3FD96241FB65
+:1054A000FDE4C6070780FD77B2C5A198C0DEDF38EE
+:1054B000C2D8DECCEE7F39D9660E9918FD5E324136
+:1054C0003C8270F90E5E20DD7C49898276FCF99879
+:1054D000784BE55A8B5F7027867F655B7C7B12CFAC
+:1054E0006F63726E4D3EC8D7B2A33F1B00F4A1C9D3
+:1054F00099C52954EE01FC8E5A48BCB8C058FBD857
+:105500000580A7B176FF6286AF2BBB37EB3391DA0C
+:10551000DD88A7807B92C1EFCBFCAA9F71BB9C5812
+:1055200013B4BBF9FB9EF8EDF35AFEF2E62304F246
+:10553000548D7E6D13F8AB05D88F4F62790F5A1CCE
+:10554000A8275D337BBAC582726506F74769741E6A
+:10555000A5B3809B9FDB33D0E1ECC83A947BC2AA11
+:10556000A2C74751F87D45E90FE8435835BA2FC027
+:1055700077E9CA1FACBD878EFFF53B267C3E2B62C8
+:10558000C3FE5F3EE27BFC1ED82FFCBB19F349BE75
+:105590003E3416E3C95F9A8D7E8C32079397AF71C4
+:1055A000FEAF8AAC32D8E755CDD365F0835645D6E9
+:1055B000E0F32A0822619EFC5D6F9449105F2298F7
+:1055C000E7F29AFDCEB1F5A84F8BD18F56BDDA1216
+:1055D00037CFFF35BB629057D59D2D382EA1F65998
+:1055E0005A3A1F4F2777AA23A9C81FC4A312C8FF7E
+:1055F000AEE2F2A77B7E1BCD06F9F3A52DBE9FE69A
+:105600005D3B5B6755E407C8773DD7F7437C5EA5F4
+:105610007DB793F169743D8F8F8AB79EE83AAEC724
+:10562000FE5F26C7FFFE050EDF9375B3889FCAAFE6
+:105630004A0BEDE784EF3FD8540AFBFC8DC9298261
+:105640006E5DD56D73885FB7AEEA8DD364FDFD9452
+:10565000513C2C32E0E1C2CA05888725F68A63A056
+:10566000072A578D1E16C07DFE0A84F367665F36D3
+:10567000C8E3536D0FBAE3E5175F88C54F1BC70F2B
+:10568000B5BB4B74F8D1F012FBFEC93F57FFFD11BB
+:1056900090531B5C06B9125BF6C05B4E7CB825715B
+:1056A000FA3C49F57700E1A6BC7804E87AB503F343
+:1056B000E412C3EF2A12E80D7E09EC676A67591DF0
+:1056C00023E0BB04E150DDC6E8E072708B7E97D327
+:1056D0004159FCF58C766874504B54CAB0C7E5CB81
+:1056E000D1C1C344B5F6B28E6E3A687BA32C2F4A63
+:1056F00007A31DC1B1F5B4DF1760FFE4F7C4FF7164
+:1057000059755F07F6CE4A13C6BD8EDBD5F4BB587C
+:105710007D38C8E7E3EEE0C4EB4AA2F5D9DB07B970
+:10572000F5F73A9E6AA6708803BFD18E04F493A75A
+:1057300092C291FFEFE8E73373FC3CD1B1F6B2328D
+:10574000C02709C6F7276BA526BF4D49CEEE7D2F92
+:10575000E8D1E3CEDCBF8768EB1A7BE056076D6FBC
+:105760004C7E08F5FCF1E302EAE1A57F5E9C0F7236
+:10577000B887FD5B1779E2C420F45B3E79C28CF6F2
+:10578000148E4BA8FD037A00CFD7E03EA03FFA5914
+:1057900012C5731F84CB7F4744E3BA5AFC76595D28
+:1057A000C7A3303EB1AAC4A39DD757A064F6D87F43
+:1057B000C23C74FE79D91CF0C0B92159201540F7BC
+:1057C0006629D00CF986666FDA705507E7850E9664
+:1057D00097633B78B03987BE6F9BF9070FF8F92CB8
+:1057E000F43B505A33A5F37A7FB939AD9DDD7794F8
+:1057F000A77B9E0BE7A269DDE077A0F3ED65DFFCF8
+:105800001BA1FB9E35BCDF78AA76D117808ED2CD46
+:105810001FB5FC15A991B5276BCD8DAC9DFB51171C
+:1058200054323FE9EBD392107EDABAA6BEBA1CEF2F
+:105830005B9BFA6A069E739AEACCFF1CE0F91BC8D0
+:10584000FB01BA4F66FA39962E1EE5F2E7EECDA2BD
+:105850006AA6E31D34771D70005FFC54C07DF55DC2
+:105860001F1E3403C9FFE9F07133DC97701FA4EAEF
+:10587000D0F54C238ACC8CE810BE3F9DB4BB58BDFC
+:10588000BD0FDC7F1A1D8F6E9961BC852CFE7CD705
+:105890008787C7821AA5E32D83F2BE77880CE34F72
+:1058A000DBAB34B163517CBC57E9786274BC6EF8F1
+:1058B00049568447143E568497061FB85E04DBA3FE
+:1058C000F0457B45836F03C08DC26F6AD2949BC93C
+:1058D000B0C4FC32D539F873765E8CCD2716BE5F26
+:1058E0004313E5B7A71CFE3DC07F8D0EFFF3C03FFD
+:1058F00073AD5DD9522E9E077B119ECF370506A44E
+:105900000FC47362F97D200FAD237E9C37964F8FB5
+:1059100002BF5C0D25E50B98073FB7722F5FE7EBE1
+:105920003F3BE5C2F328FB3ECE86729EA973F59DF0
+:10593000C06FFF6642FBF3FCDEFC5EF3EB8E72BFD2
+:10594000CBBB0E7E9E88AFF33E6ECFDDB7D7118204
+:105950007B10EFAB3575EFAF80AEEFAB65F9274449
+:10596000EA1876BBC19E6CE4F1909EE3C07E21767E
+:105970001C6D9D07B2FB5D05FBCBA747C8B88FD850
+:10598000FFCEF93F56D3BA3DCB8AFB84D5C99C7E66
+:10599000CBD8BEF5E964BFA308FC5F2B537C2A5D1E
+:1059A000E7CA3748BB48E17460C843A1F212B81790
+:1059B0005A44DFD9DAC8D66039BC57C8EE9DF170B9
+:1059C000BB746DC7F136A0C753472C1877F8D2C502
+:1059D000CE13AE345764831DFFF96639EEFD679F21
+:1059E000BA249CEF66A153003A9F4E825690177BD3
+:1059F0003B26F785F9B87DC403E47F6AA34964F7C1
+:105A0000A369FE96B0C4FCFDAAC4EA7E5E7A6CFA75
+:105A1000FBC6568C1B83791E335ADEC3BC5A7709EA
+:105A2000F3DBC5CE23C9C9E6EBEA48C17C52D718DF
+:105A300011F3B15DBE2E01DE1BD0512EE3FB41A15F
+:105A4000D7F7072CF18C07B8C2FB20E7075CE1FB16
+:105A50001627CBD35AC7F7D99BCDBEA631749CCDA0
+:105A6000AB9305C087D64F7132B9726A8CE6470A8C
+:105A7000A21F293BCF63837B2CB2FDC8DCC4551227
+:105A8000C4FBBEB7403FE66745386C1EF26218E2C1
+:105A9000D82BC1BF027836337A5AB95A40BF2A850B
+:105AA0005F3FD0139F3F66B905D631A059F0C0DEE5
+:105AB0009D9671E73DC5656574DEF238EE0BC14D0C
+:105AC0000BE3666FFC00E7E54AB0DE7A17BB27FF01
+:105AD000F3CBD0C7570E766F62766D07BF1F2F8C42
+:105AE000F7E005B57BBEFC25EC7E13C9AFE8F36398
+:105AF000A2FCB394D321F1439CADB2540E811F415B
+:105B00006CDE3C05D63D3D682137D1F5B5081D7EDC
+:105B1000E0177584C8EF53F21F0538AD59D717F356
+:105B2000F0968BFE6CD0C3EAFF91314E77C07F7E3A
+:105B300003DC1FBFA95446BE380070A7F5A797E441
+:105B40006E8638A5ABB6BC6D3A1D2FE49151B234C8
+:105B50009490B7F3214EB944F408B47FB042CBDF40
+:105B6000F6E0799EE1A6AFC617401C2F43449FD2B2
+:105B70002981DDDBB06C49B907F0BACC9326E8F790
+:105B80002F77723A389A5271A793C2C7FBC87A0F1F
+:105B900035E3287FA65E057E44B55956B6B3782115
+:105BA000DEF790CAF192DA2186ABDC5877CE4A81D3
+:105BB000FB7499BFF4D19B03CCCF09B1D191E8E735
+:105BC000E47F5EC46B1AAFAD1C6AC74A6B7D15F6E5
+:105BD0008771D2E938A9256278241D774BB27F13EB
+:105BE000FAEDC65A114E44EA6C033885C6F6C3BCBA
+:105BF000F0F5A306BF07E758520F754D063D1ACAC8
+:105C0000B2FF6933C8A965B2027C9EBAE4E43D786C
+:105C1000F99BEF170F4299DAF8D1C320A7933BFF06
+:105C20005687CFC7C906FF62EA275F7E0BEDA9152D
+:105C3000B2C14FF94D4AC5CF012E9B0A8341BC1713
+:105C400013309A1E5DC7EEA51DE3E0BEE3539344F7
+:105C5000DF16DE8EEB6AF5845632B895805ED0E0B2
+:105C6000B65C54DAC3B0AE8956A48F3CD281F22A16
+:105C700003A2D903A37849FD64C542C8D7889DCF44
+:105C80001AA7D07DFF06DC1308B882FC1839630C14
+:105C90009E43DC53DCE1057B7E7582FB73DE75B1D0
+:105CA000F72D22F3B3C6B6BFED62F40022B1AD18F2
+:105CB0004B7F11944EA226419969C5FBE6F688CA2E
+:105CC0007F209DAF3729801FE86FA6F8DBFFF669BC
+:105CD000F42FEE0F7E80E5B3AE02FC1E6D0FA7D34E
+:105CE000F7D794B0FB8ED778188D5437337951EDB0
+:105CF000EDB442DCA4BA9078B6707A53353883BFDD
+:105D00008CEBABCADB195CD30A09C67DC11704F75B
+:105D10004DA5433F0ABFB4E6A50B118FA4431D4810
+:105D2000FBAD8171013F8D2CAF9F904E2BF26FD058
+:105D300084714FCAEFEF825FABB2A52FC6FDE1F8C9
+:105D4000308C97C2BF9BC2C7DB4CC701FFE1A9667D
+:105D500013D982F2AD03EF675796505A46FAEC2AF0
+:105D600083F39A4A89C7B352A3034D8E51D6984103
+:105D7000F505C06D86AA2E04FA3B6EF5BC0DF370D6
+:105D8000B45A1458FF8CD6971683FDE2F07636830A
+:105D90007CA82E65F34D69A1CFD1CE51DE85FED50D
+:105DA0002D16857D8FC3AF84D31987C34C3EEF99E1
+:105DB0001BD9BCED59A120D067F5120A57680B30EA
+:105DC000BA0797E82511F9EA10ACDFA5A6E3B87D7C
+:105DD000A6C4F0450CFD69EBAAE4EBAA5CC2D6456B
+:105DE000383FD1698561DCCA12B6CE1984BD2FC295
+:105DF000733AFE4CBE9E4AF5452C67365B0CE36F4A
+:105E00002AD8D601F3C92994153C3742D87D87D9C1
+:105E10007C5DD98DEC7BD9852F22BC48AD6EBEE868
+:105E200057D5D5295F9D7A8B3216B573856C2B12A9
+:105E3000D3F19FC918CFC96B35AEEBD48AFCAD70D6
+:105E40001EFCB3C7648C7BEF117D4707E07E545680
+:105E500098FCF17D3001E4F4CC461FC8F1DD650CFF
+:105E6000FEA76E2521A08741872A5200DE830E05FA
+:105E7000785983F1740A10A15BEED1F9D12D53B397
+:105E800000F23232F0B95920074AD9399F2CFDBCB3
+:105E9000E9FC529BD3CB211F2AAD34A55CC6AB5D78
+:105EA00063DA0F3D315984F6834F3C08DFC920BACD
+:105EB000F5D076D93D909D6B39485BA15FEDC94720
+:105EC000001F2DFC1EF24130B3142C0F42994AF9E9
+:105ED0007B550ACC53226374F7586E7F6C249E0363
+:105EE000C794A7622CC324CE3D97BAFE43787F5552
+:105EF00088D3CFE5560CFBF3ED8FDD3804F6F16B5C
+:105F0000C04E4C8273BC9EAF204F47F58908F735D1
+:105F1000E6B0B590D69753BB11EC97B5051F89C075
+:105F2000776BF6121FD0476AC53F2D7A3CDEE462DC
+:105F3000BFCF23C96415F0FF812127C7019E42FB13
+:105F4000A9DD49FB97FFDEF98403ECA13FB23C9841
+:105F5000CD6FD5A0FE7E285B8E7B1F2FB98C9D1840
+:105F6000DB3F65D064F4E70D685D370EEEF7AC1EDD
+:105F700027F96EA2BDD35ACBCAC08E512A2875F517
+:105F8000A5F3DE387C2930A13281C5CB9471ECB900
+:105F9000328695ABEA0E3D0AFBF6E04EC99647E71E
+:105FA0003B7405BB576C55E1796B80DAA52565CF4D
+:105FB0005B6FA5CF4F94502D489F9FB8FEBC0DE25C
+:105FC0003B4F9794A7023CF7361BED3A02975DD101
+:105FD000FD509125E877D179B57C48109E264BB8C5
+:105FE000AD92D64D2F39C1C2E9B1CF59D1B2790A9C
+:105FF000D0E98C0219DDF6B1EBFD88EB93E9B55DD4
+:10600000E3E07EFD1C9530FF7EF07114CA33B9C801
+:10601000C8513B50E8B85AD9FE2428F9DF04B91C0E
+:106020002C0CC8F08A26CF5A0655EE0079F6676E1A
+:10603000D7919A5978BE0CF9DF04F6505759BC7DB8
+:106040005389D38EFD4F6DBCED63F053CFA865F639
+:10605000FE808D5F09880F6AF765D0F10794E055DF
+:106060008364C692A0B508F09327124581F9B41352
+:10607000D82704A9FED1C3411BF7BFFBFE429705F9
+:10608000F9B0046C67DD7A9C7C3DD93EBA9E387AC3
+:10609000BA987FF7A74F7DB57F14C07F09DB220D2B
+:1060A000081E13ACBA790C50AF6C1ED7C07860BF15
+:1060B000BAD8F9535749279E938A95EF60CE03DFEC
+:1060C0006E729C1BCEF6F74679DAA3CEE92AF679F2
+:1060D000768CBC2AB2B4DF8CF8DDCDEEBD868C5850
+:1060E000681788A8B07B3F43DAFDD435D06FA8CBC2
+:1060F000E9013A6819F25131C06735B717661612CF
+:10610000DCAFCECCEC407B617A23B717245F130859
+:1061100059C7C664B252673FA0A9045BE8466E2F18
+:1061200068FA9FEBED6A6F4733EA55B00F747AB5A2
+:1061300052657A758097E9F5EA66FA1D8513F3488A
+:10614000BD5DC2F4B8D2CAED07AE8753F977D39AD2
+:1061500099BE4A053BC20D69102AEA658C61A547C4
+:10616000ED963E854C5FA6B6EC41BDD60E87B64790
+:1061700080DC60FA32EBBDC32A80C94B1FB75139AE
+:10618000FD246FF77AA87D9612B5CF968B3CDE443E
+:10619000987D8839FF749E8F427F9DDDB88DCF6FCB
+:1061A000CFC1945B40BE6E0FE6E2F9728D6FD1FBFA
+:1061B00049EBD9252C7F25BB96C5C95DBEAA1D26F6
+:1061C0005D1C62968BDD3B344BA3ABDAB017C60D7A
+:1061D000C2FB28C7D9FD3F2BE0BE1EA017BEBFBA29
+:1061E000CEC9FD1A9C7E12E9134D0EB988DF5D48B9
+:1061F000E17B22B403E5B54AF74BB0B613C1867E06
+:10620000F703BF072795C0FCD78CFA3BE67F0C4805
+:10621000B05FFC54DB677E47B9EE1A7798ED433BDD
+:10622000C4B8E77B32DDCCFFD02E1107C0D3166493
+:10623000F7C8D94AE5B8FD93DCCCCE3ECDE1B666D1
+:10624000D40E3CA799503F4B4435C5D1A79ABE6D9B
+:10625000013C5F47FBBBDE6E52719F1EAA30A17CE2
+:1062600025B8EF0C924EDC47AA0532FA0D5BCC4103
+:106270002BE0636D09C7ABC7BA19CEFB7E67BC5074
+:1062800078009E57F8C5909003780E798A985F073A
+:10629000EF413845F7EFFA78C510B7C8E1A4E00F31
+:1062A000F30D6866F4B566948CF358393C7DB329D8
+:1062B000472F7F052E3FD939B195A3DE44FABAD2D4
+:1062C000F955D53EF7D4095D3CF1E486677201CEFD
+:1062D000BA7B307A3D4F5155FBB7D66D71E204DD84
+:1062E000EDB08F72C23E30749721AEC9F13BC62D1E
+:1062F0001AFC6E205FCDB8B908F503FFD2EED121AC
+:1063000037BC4796B0B8ED6C1EB73DBDED363C5777
+:106310005E44C9CA1C07EF5FD619CFDF7FB9FD996C
+:106320007ECCAF1132E409CFDEF1CA50437CD84FA6
+:1063300094B491EC1E63D4D36FFA548B297A0F81F5
+:10634000763FD695DEB79542CD30DC77910A2CD3D7
+:10635000490D965E12C4B21F6967E766619F3B10E4
+:10636000F44217960AF1884427F773890FEB79A452
+:10637000024B09F0961A8D4B483BAD98BF01F10BCB
+:10638000E0FB44E7CE7CEECA856EE4EF9AABD9EF32
+:1063900018B178C564B7FF0137E2218CF27B3A1758
+:1063A000E5877E35B41DCE1F3DB09A9D7BD1E43B81
+:1063B000EE6FE8779E4B61FA405D2FA01CAB774CE7
+:1063C000FC21C2B3C57C461F6F20566B1EFC3E8865
+:1063D00036EE74EE6798CEF520B8BBD9F9411F9E12
+:1063E0004F9A0EFE065D3BE96E67F7D968E3888E2B
+:1063F000EB07F716EFD3BD8FF9D19531FB80CBEAD0
+:10640000EF98FA8CD8F7BFA1134A8FFAE39EFBA14D
+:10641000928DF4CAF537252805DF6BB61CC3FD58ED
+:1064200070AC5F0F9767391F687A65464CBE476C42
+:106430003943E2FC11330ED580C970AE17EF96D008
+:10644000F1B7763FA9F6BB5AB3FD013983BDE60526
+:106450003C7AF8BC83646379062DBF80BACEBF7FD7
+:106460003829F0925BB71FF1F86B44FDBD377339E3
+:106470003F8E35B594819C3B15203ED847CC2635C0
+:10648000EE1F803FFFB009E55C7F3A6FB918EF1D42
+:1064900053C514ACABF07B2F67EBD839A193FC7ECE
+:1064A0009A1DFC7E9ABFF07B858BDA164F043A3832
+:1064B000CDEFA529D8BBA202FC3E45ED8E69A0F721
+:1064C0008BDA4757437BD14E0BFB1D1F2E27B47928
+:1064D000C1B96C3BFD4E26FD9E3505E40941BD7BEF
+:1064E000B6C51E82DFFF39DB6E62F7AA168A789F77
+:1064F00003DC8B66E2F34B4A81EFFDD7BD608F9CD6
+:10650000E6F2E48C3B99E14B5205350DD252880FEF
+:10651000EC9A758EF9780EB2CA19DAF1441AE4874A
+:106520005B7DF5F4FBFBF7BC940DCF1F77CCC7F276
+:106530002F1B3ECE06B97576DFC7723CBA9D278504
+:1065400065F04FCDD92B88103F296B9F26437CA443
+:106550006AD77EF42BCFF304B07D6EDB1EAC8FD9EF
+:10656000F51EC64F06262938AFB31901F4F3E6B578
+:1065700059C2F07B1CBB7383F7C78DDB27313DB35A
+:10658000CEF11A8EFFB8E3B537112E1B2C78FE63BF
+:10659000FF86DFE3B867F6BDC4E74B305FF0ACAD14
+:1065A000FDE8CF417FEDE1E731AD1D6EBD3F584ABB
+:1065B000120CF2F5AC8BC7BD322FD38FE70B1267ED
+:1065C000879BC9A50E37C4CDAADA191CFE620ECB73
+:1065D0006047CE691714F83DBDB25D9BF13CE09C6D
+:1065E000BD563C2F3107E00170A3F042B8B4EDC7AF
+:1065F000F9E7025CFAC03A3EC07CFCBCBD142EC375
+:10660000A2EB9EE30C20BF6AEBA57060EBDE7D3948
+:106610003C058C786A7B4F06BFCCDCBD02C26FEEB6
+:106620002E368FAABD6C5E63764D43FC9FD947140E
+:10663000F0B79CDCF3F16958CFD97D56BCCF579B9E
+:1066400017A553E22E06FE61744AF632B9AAD9DDC7
+:10665000F342E9F8BB03DDEDBBD8EF9202C86C94BE
+:106660005E8BF64EC2B86009102FF0BFA77D28FBE5
+:106670007DC16036C075F7E87036CCFB8CF6FB4800
+:1066800052301BF0E273074A9274F8F8F2D84BA824
+:10669000170BC49A4F1F013E7E5E44BB68F127EB87
+:1066A0000CF7ADDC003F483502E0F6AE1BE1D67DCD
+:1066B0008F4B90E54B9100F26315E7C7B39BE9BEA2
+:1066C00093AEFFCBB617B0FD6C8631BFEA2F6DAF2E
+:1066D000A700DC2AF9790C12BA0DE511854BB33508
+:1066E0008E9EEF3ED71662E715CF09FC5ECDA7342C
+:1066F000B8D5C8930D713E260F3337E61CC47D46CE
+:1067000028FE39C7583B29F6BED444F900C7B93C26
+:106710003BC1EF3FD0F4EE6477605A529FC4E7BDAF
+:106720002B57CDCB067857C2D948BC0775FF4DE033
+:10673000AFC07343EC9ED430C0E7A4760F2A79E94A
+:1067400026C8333D99CCEAB5491DCBC1AE3DA9DD84
+:10675000ABAABEC1DECF61EDADD04EFBFFCA5D512D
+:1067600093C4EC7B81FDBE8F39197EA741D31B8971
+:10677000E160FC9D8667E85A012E74BC9FE37812A5
+:106780001DAFE8FB8FA7C9E9EF3D8EF57F761C4D65
+:106790007F017F42EA23F1F986FE4FC0EFBFFB3E47
+:1067A00009CE34F0D5C50D039B208E7681DF23639F
+:1067B00069594A409FCF6C5D17F7F7DFBAEB3C2F62
+:1067C000471E48F94DC7D78792985D7E88CB69F8F8
+:1067D00083F89676CF24FCB5A463EA12EE9FF3F912
+:1067E0003DE6052488F6E950D28E6521E9C072188D
+:1067F000E9C212C3CC03C155EA33F1FB6847C2E2D8
+:10680000E75A034FDB44CC3B7803E410DC4B2B9876
+:10681000C09E9C7F1DCCFFED240F8757D8F07B2BAB
+:1068200044FF7B180AD88313BCBDD983C4239DE9D8
+:10683000CE7BC9C57B6DDF4BC2F525FA1DB5853111
+:10684000F7DEB073E11A1CE69176CC237963E3039B
+:106850006F0FA1F0BF7F970BEDE4C11B1B17823CAC
+:10686000BF9F74A4C339E1C1FC1E11D266FCFDA612
+:10687000216D16E3EF08C7FC5ECF1CB88704CFEF8D
+:10688000199F6BE770F11EC838F918B1E778FF9AC5
+:1068900014FFDE175218FFF75062CFF1EE6A17317E
+:1068A0003FEA01C8BBD2ED2F866CABB118E94BF9BA
+:1068B000B73CB3AE2EF8983FC265F76F177A7EE704
+:1068C000FF020F2194E60080000000001F8B0800EB
+:1068D00000000000000BDD7D0B7854D5B5F03E3391
+:1068E000679E99849964924CDE131E2128E004432C
+:1068F0008C68EB49881811EDF0A845DBE20404022E
+:10690000249940D1E22D2D131220206AD08840090D
+:106910000EF828D64727BDA888813B20225AED0DC6
+:10692000D5B6D45A3A20554484F145B9BDF57AD745
+:106930005A7BEFCC83A460AFDFBDFFF7A79F3DEC90
+:10694000B3DF6BAFF75AFBCCE50E85B14CC69E5654
+:1069500094DBBC2319FB12FFAE893D6FB1EB181B12
+:10696000CBE0AF8D4D2C67ACB541B5AF81526BD04C
+:10697000AAE99DF0B4EB824A316379A9D5E6F950D2
+:10698000660E9D7D989BB109FAAB0FBAA1BDB151BE
+:10699000BDDC04E5FDDBE6F71AB0BF4B6526983297
+:1069A000CF01E34299E5E882C3A0DC66FFA5631648
+:1069B000CC5F6283F7304E819D05DD30EEDEAD7732
+:1069C000EAB0DCDACC5836CEA3F87ADDD44F658F46
+:1069D000E1B29836A92C8BB122FC27CCA3B2B51F0B
+:1069E000EBD318AB693C6E89D8E07DA46E121BCD49
+:1069F0005895BD98F6A9BE73FD0758DEB2E498C35A
+:106A000007F3BDBA75E56F26C0788620AC0B8628E3
+:106A1000FDA2F5ED09305F74AB916D633138142E32
+:106A2000558F45CC3421FB12FECB5F9C5836322863
+:106A3000978A7231AE23AE1ECA978BF9199BCEC2CC
+:106A400059582FD6EBD418837532BBCDF9DEA58CFF
+:106A50005D6357D8978363E5B1A2BCDDD0516D85E6
+:106A6000756EFF93E26981EA7D5BE714E1FECEBEBD
+:106A7000E02BB2C33E9698D346B341E79F9FC1EE49
+:106A800016E717B0E85CF80C5B982BD67EC4A3CD54
+:106A9000261F8CD3B68C798E0F63CC1CDC6FBD1493
+:106AA000CFF1A0C10345B64261D34350AFDA981687
+:106AB00082792E17F892FC5CB1CCFDABA186D8BCD4
+:106AC0002BBE983A1DCF379A6AD5B629E7AF4BF659
+:106AD00053EDEE009EAF219F7952603E83B337D7CE
+:106AE0000EFD2E7DDEE8B101C826FC62E4A008CCD4
+:106AF0007BE94BB730772A8717AE575D62F41CCF1E
+:106B000060CCB4C4E9512FC77636C2C74F6CC6A05B
+:106B100009E1BFE4EE0EAC6FDD5AE172C7E1F5CAE0
+:106B200065768F0AEBDCBCCCEC5161832BC5FE9201
+:106B3000D757E0D07983D0CFA8633EAC5F04E7801D
+:106B4000705C644FA1E74251EE52035370FD5D80CB
+:106B50003F2D88AF8B39FE2ECA310711CF17BD3AB2
+:106B6000249BF54357F2F9F832976728AC63F3E2B8
+:106B7000992E065DAB16EEB75C07FB5F946AB623F1
+:106B80003EEAD34A1EBA1AF1FD350343BA6A4DAD47
+:106B900070CF8A1B4F9F56E94278E875815C666723
+:106BA0006C957D46AD9A83F812D8C43C8CDDD771C4
+:106BB0002D2FA7067215A87FA8E37A5ECE0C6C5223
+:106BC000A0FEE18E1B79B92090AB83F2CF3A26F379
+:106BD000F2B0C0262CFFA2E3DBBC3C0AD690CBD897
+:106BE000F31DB7D40660FE568367BA07E67D06D666
+:106BF0003F12D61F12CF17ECFC5C65FD2FF13DC094
+:106C00007B877826D73F27FAED1CA07E97A8EF193F
+:106C100060FC3DA25F7880FEFB44BFFD03F43F2093
+:106C2000FA1D1CA0FE3551FFFA00E3FF5AF4EB1DDC
+:106C3000A0FF6F44BFB706E8FF3BD1EFF000F56F50
+:106C40008BFA7792C63F22DA47C4FBFCD4F6B7032F
+:106C50008077F9C0B7F0AF34B53D1DF16E7373396D
+:106C6000E17FEB58C0F391317CCF579817CBA31D30
+:106C70002A8D371AF9313CDF14E3572D1C7A1FE2B5
+:106C8000DDA237F41EC4C356C573D807E30716EA5E
+:106C90003CC87717BDAAE778BE500DB238FA7E33EC
+:106CA00069FD5BC4FADAC47A7F651F4C7453B4C4BF
+:106CB000E59924F925D2BD3DB16C067AD260FE3645
+:106CC00027972FA50BABCDC3517E807C41BEB9C2A7
+:106CD000660C9B60FE157695EADB9CD576AC0FD8EA
+:106CE00055923F2B9CD5E659C8576DC0EC2A603EA3
+:106CF0003B1FBBCDAED606917F386AA87EC22F2639
+:106D0000D9918FB6B1A8A30AF7B714E40AF4DFDB70
+:106D10005C4DEF8B1C9F39903F1F4AE7FBDA9F7A4F
+:106D2000C0520CEDD43B74242F4AEC2AC9B1C14B9C
+:106D300075413734D96F5FA4C3F2236D5C5EC15FC8
+:106D40006A19CC3F944FCFB6DF59F15A29CAB37BA9
+:106D5000548FDBCDDFA971F26028CAAB349C373D7C
+:106D6000415E7595330DC70DB8CCC1C760DCA12A53
+:106D70007365A4C7E05EE4D073F9A29FE441B9361D
+:106D8000A423513E15B7C7C92786F232513E25CB01
+:106D9000AB8266E08F71FD4D2E7B42D9E24825F92A
+:106DA000043CC6F3254CBDA87BD1755616E3D7C964
+:106DB000F2A855C807C9775BBFB83C413E48BE9CA6
+:106DC0002C1F2ECC5FDFBC7E38E121702BF785F9BC
+:106DD000EC9B8807807F069F42F283A93E9737F598
+:106DE000C2F03218BC76BBEDC2703364BE457A8502
+:106DF000C1A7D2F8E7C9950BC055B6339A1FE93A37
+:106E00000E72EDB3777E58CA806456026CE8FC338C
+:106E100075C1C760DFF94B9EECC2F1F30E58DB1071
+:106E2000CE46D7ACAE36DC4FC7438C013EE9CD1C15
+:106E30009F8C39D576ECAFEA3457FA10283FF1BB76
+:106E40005B15C0277D46B387C1B91D7CE6B5F41B31
+:106E5000107E6F1888CE4D3AAF9D0DA1E510BEADE6
+:106E60002AB06E5D4378EC33239CF2B79B490EB099
+:106E7000C0A3AB3540EA56380E360EEBA7AFD6604E
+:106E8000DFDB95BEF2F5580E058DBC3DB068FCBF4A
+:106E90006E9D22EA99A6BA48EF14F5BFACADB91AB7
+:106EA000DAABF64B55903B8BD63DDB6E28C07A9D16
+:106EB000ECAFB14AD82FCE27CA2A9CCF93FB457D91
+:106EC000E0A5F61A20A26EA39C9F05B07DB74EC721
+:106ED000CB819E761CFFE96AD13FF0F86A2D9FD6E0
+:106EE0007383DE0145C72BEDB62B63EB5D97FE4642
+:106EF0007B0BECEF2377240DB6C11AB71ECF42F9F6
+:106F0000BC6A7AB317E18688EF05993848EF263CCA
+:106F1000ED3BB71D930379507BE6C0DFD246429527
+:106F20005F1F399002F06BDCD96C36407F93C11B38
+:106F3000C82B8EF56BDC5147FA8CBFA78C9EFDF4F5
+:106F40003BA80EFEA7FA998D1731DF47E1DF343DEC
+:106F500005558DFAE6769B9EDA337EFEFDEF4FF601
+:106F6000FFE8A9DFDC8CF39D7647B22642EB556142
+:106F7000804B3FFD64FBA69D93E9793845BBCF016B
+:106F8000EFE702EF227EA5367BB07DC8DC61F7001B
+:106F9000A02D860E2FCA0D007D5057197BDEEF18ED
+:106FA0004AED93DF27D357C8CC3226211F6F5049B3
+:106FB0004E85CC8194D1505E0B76480B2C6979D9E3
+:106FC000EFC68CC4F2B3368676496BC37ED748A42D
+:106FD0002B8F91A1BEBBF6CA500ED2795BA371FA7A
+:106FE000A388BFE145AED971FAD6BA7403AD63F593
+:106FF000CB407797C1D3107228D87F18C80D05F9F8
+:10700000A2CF8C768E25279D058AB19D6D2DD2E766
+:107010006A83AFB61ADBE5E848BE58864DABAD864D
+:1070200075B832758A9ED65173780ECA37BB112552
+:10703000283B923E7327C2E949D5D38C74F8A4CD7E
+:10704000660F4005F0480DF99F3ACC19C4B249CFFC
+:107050009A518EE795813C8FD3638F08FE79C46186
+:10706000247EB7D6129A5C05E35817E9EC01986FB5
+:1070700075E3FADE0930CF4F1B9F3BD402EFD76494
+:10708000A90CD76173AA6123C81FC38DB04658F7F6
+:10709000D32D5E3BF2D768A6CAB641BD75A891B99B
+:1070A000E3F8956D2494E3F8648653D52CD0FFEF74
+:1070B000E9BE7F77C0BC97BFF19619FBBBC6EA74E7
+:1070C000483621959F735A79E238F6AB13C749AF1A
+:1070D00049AC774E4AACCF9A9658EFFA5E6239F7D0
+:1070E000F6C4F274896FC0736C208FADBC8A5923CB
+:1070F0001F2F43790BF0F903C2DF5AA2F3207C2C37
+:107100008D8F9E9803F579C84FD01E1ACD48EEEEAC
+:107110002BFC1737EA05A6F466B763E4F9F0C82B31
+:1071200030DF80E7651BAADA19B4B7BDF3C11738A1
+:10713000BE8DC5B52B46F8685147262FBB603DA9CB
+:10714000F80F37C2BBF9CF3F46B97848EF4178E72F
+:1071500035AA34FF3DD3DC413DD7275CA8CFA489B5
+:10716000F669E6B5BD7AE0E769EFAC5E88766F3226
+:107170005CB358B3827409F8C1EDED3A46F26395F9
+:107180008ED523DEA08D80E3917A04FC626A86911D
+:10719000E0644A5784DDA8EAB03E4BE84FC69CDB6A
+:1071A0002D48C72B0E70FC5F61E4E3F48DE7A64920
+:1071B00011E519F2C98C745DC238EBEDA28D286718
+:1071C0003A78B97B7FFA0D4897EBA7A58F413C3100
+:1071D000A1DD05E30DCA376B23607F96578D01054E
+:1071E000061DA4B2FD0638CB6E2BBBCD0BEBD878B9
+:1071F000D01AD0C37BCBECFBEDA8A7958B75772F6E
+:10720000F7BC897C205AA7121C2D991DF63123F951
+:107210001E02B03E4407948B55C33A49CFB3547510
+:10722000907CB7947574209C364ED291BE917EBBF3
+:107230008EF0D952103A3414FD04B375761C2F1D0C
+:1072400004BF11067920BFC38B7E130630D755705B
+:1072500054C1716987304F8680ABD3B9E3870A8CFC
+:107260009381E38DE6ED114E0E01A7ABD3DD0477DC
+:10727000A718376328B41FCDC769AB888D23CF719A
+:10728000632D0BE2FAE4BC729CBEF199A6205F3537
+:10729000FC0AE006E7A4149A69712BE633B28FBBAF
+:1072A000977B9BB7125DDBC8CF91EBCCAF463CCA56
+:1072B0003DB8698A6E34F6B3D23C86D92C88789C66
+:1072C000AB32F337D351BFF1121C93E935677FC757
+:1072D00054D453E5B924D36F8ECADAF5E9E7D371F4
+:1072E0008ED3595D32BA1F7A4EA2979C83D13B1040
+:1072F000E993E97A4BCAE932840B8B6FAFBF7059BF
+:10730000AF0F1D423F0FCB063901A02F4C9A8FB112
+:10731000FF326159613AF7974390EF3B84FF06E4EF
+:1073200015106BF718FB781BD2E94246F855FDFCA7
+:10733000DA5B7F05E39D1D66B4A35C2938D8D18B49
+:10734000F291EDF40DC773D8ACFA1E4E81FACD87D9
+:10735000B319F2EDD5166E8FA902CF93E5CB3A4162
+:10736000376E9473AE7FFE29F5C3D0D0AC4BED40A1
+:107370007BEBEEAF7DD59CF9BFA867B1A749CFCA1B
+:10738000DFDFDB62C3F9D71D6C37037C2D6FF0F6AE
+:107390001D500EA808BF06F267ED2B98437052DF10
+:1073A0003631C4D3517A2D8865F6470B43FEBBFDB9
+:1073B000D9EFD5BB91FF644D74231FDA26E83D2831
+:1073C000ECB3E4FDAB46CD87FA44F2FB4DE93A71EC
+:1073D0009EDE1375708EA31E31B2355059AA9BD90B
+:1073E0008EF65D7435F05FA89DA97737DD1D67DFE8
+:1073F000DE6BAD0AA5A35DB2CCCC7CA030E79F5379
+:10740000980F88B3C0F99B2AE43F852CACA09C2D33
+:107410006C068517F16AB195F9E2F03DFF9C4AEDE3
+:10742000EFB56AA1F4B1FCBD19F88081FF933D99D5
+:10743000EE65754ECEA3507F313C653D8A7C833925
+:107440006BB43E7B6430E22FC87D986FB7D8B7012C
+:1074500060681803FFD97461D3E8F3DBEF1370524F
+:10746000CDB630F24BD5F6FA61E22F76F5547C3B7F
+:10747000B4BB89893530F2CB225CA8FC033B95F381
+:1074800080FF9AC690DE1F40FB3B90C6ED11A669B7
+:107490006E6716D20B2320E79B59BB19DA11B6038E
+:1074A000BDE5B05E0BE9CDFB991BE9013D6CEFA595
+:1074B00010CB6208D7CD8CD5C6D3817C4ABF84BAA5
+:1074C000444FF6D4A52F59683D866616B4A03E8475
+:1074D0006B0378AB8B59502D8EF905473BDCD4CF2D
+:1074E000C89A499F7DFA8B23B9C8A7AD07401FBB37
+:1074F0000CCF59477CCA6A4DA43FC65A084E5181E9
+:107500001F5DCBEC74CE7DF69BEF2D71CE91169462
+:1075100017858BD313CE57B6CB3F97C77C97C78FB2
+:107520001BA471F387EE57D02F937FAE90EABB96E2
+:10753000B92F30FEE001C6CF213C1A78FC7CAAEFBF
+:107540000ABFE5B80940B139BADFE175C7F4EB64A9
+:1075500038E72F4EE4CB97ED4C2C4BB8580C9A7370
+:1075600032C0DC7287CEB315C6BBE27062BBDAE212
+:10757000DF92FD1B6B1F764EC5F6609F6F85B75778
+:107580009D486CEFAD7AD981741C6BCFD777CDB99C
+:10759000C476C9E793BC5E5857E6B7E3D635DE6CD0
+:1075A0004AA89F5E77DEBA32BF13B7AEEB5C89EDB7
+:1075B0007D2DFDAFEB8652D33F5C976CF7ADCA8B48
+:1075C0006B97BC8FA9B5A601E0CEDB7F67FAC58DAE
+:1075D000FBDDFA7FDCEEB625C9F30408DF17E9B45A
+:1075E000F119503F135FA1BE68B392DE7B9E9D25CB
+:1075F000E4D344543CA09F274D9B88FD6A25DD09B8
+:107600003FC3C1672EC946BE9E27FCE84CF815BA99
+:107610001B5CE457F089F6204FDA905F746F877E29
+:10762000697C5DF1FA534603B72BEC2C4AF42CF538
+:10763000A5746657B83DCEF59D81E6491EFF1E54E0
+:107640000061BDB3968C67EF021D3E67B457A96811
+:107650009F6D51481F9855A3E953013FC6B52BE4D0
+:10766000579A75D79B0FA03FE6CAE3EE9D11783F6E
+:107670002BE8F0E0B44DBD4CC33841B67E61D98FE4
+:10768000E1F9E03E4671342C2F447CB3696EB43787
+:10769000EA704530CE294373991DF9E6F76D1AF269
+:1076A000CDBA69DA1F68BF7F07AD04DACDE65B6744
+:1076B000CF774E3662BCA3EE7BEE4AD47BEA42160D
+:1076C0008D9E66A65A611F75A08FE133DBC8540BEF
+:1076D0003EADCC8CCF8AE55CFF4AABF41AEB60FE82
+:1076E000BA9E9F7D8EFDE6AAE1BD5C9F0CD2BEEBEB
+:1076F0007A5EFD0FD4D7666B5E23F28B4BB71BB956
+:107700004E2AF0615428B18CFC20BE5C164E2C5FD2
+:107710007E30B1FC710687EF38E1C7DAB7DB447C15
+:107720007BC18756D23F7781C0433B39F0B489E4AF
+:10773000C7F805363AAF0F4F5AB7A25F6FEFDB5667
+:107740006A3FFF490B6FAF0B3D83E5C03329646788
+:107750002FC80855A4C3BA5FFC424FF0C66D19701C
+:10776000FC67466C5D83F597872A302EF6DC258C06
+:10777000F562BD1A1C8DFB7CEEBFB8DF3AFA842996
+:10778000B80DC6FDF0859F3DF3239CF789BC7405B9
+:10779000CEE72A940BD06EDC23662BDA1BE33E7C0B
+:1077A0006A08F28D05DB4D09FB7B264311FA833B0A
+:1077B0000DF16E20BFE3B1D53FA3FEA5270E13DE6A
+:1077C000ED32047418C70BACE678B6CBC2FDA4BB8F
+:1077D0002C85413CA7DD199CAEAED26DFB6913EA46
+:1077E000976F703D64A0F14B5DB3BA6AFAF133F65E
+:1077F000D5C3BCC570CE673EB0DE86FEB8E11B12B5
+:10780000CF694430B1FC7206D71366B2B8F7C5B879
+:107810009EC12B5DB89EAD8CD6537AE29D5B8B5199
+:107820001F37713D2479DE5F6770F9F9F39FC33824
+:107830009CCFE8B91E0E1003BA5E20E8E14585EB47
+:10784000C1F0B7380FF07F012A108363EF1724AD22
+:10785000438EDF22E0F4A9396D1BCA73A791E3FDC3
+:10786000C965071FC038A66CF7DE324DAB89F32B14
+:10787000CFD9B0F0400E9C7F437726D999F27DC3D3
+:10788000132F657D17DE9FDAAE7A50F56DB8E5F1FE
+:107890007BC761BB27F4215C27D66B30FEA9D0CB18
+:1078A00069D86ECE66C718F497C8FE73375CABD53F
+:1078B000C4F1D3AF4A4F92FE1B847DFC7C65EF84FC
+:1078C0003C80F7820D8A079B2D087D7BEA8DA8EB13
+:1078D0006CD67B30BE51A132AF7E0C99EED3F0D97D
+:1078E000D0FDEC815CA8F7EF1E5B81FB5AA3F3DEB1
+:1078F000300AE9658B81FC60C9E7637472FC85FE20
+:10790000611DF45F73B3AD1EE32230EE7E2CEF2BCE
+:10791000DDA6473F7EDA09E06FFCFD611DF0CC1368
+:107920003D2B4683CD02786C6B47FAD8858E0B9C35
+:10793000E7693DC90916E6FB1827FCCF0BFED469A1
+:1079400054E179E2C4F2B42A4E7F744EC8D49DB09B
+:10795000BFFA474611BDCEDD90485FB29D5CEFBCDB
+:1079600060627D325E9438A5BF8295C6E35772BBD4
+:107970008C490123D263C312E0E77174D370BCC396
+:10798000887A57F23CA8413279AE7AC24BE6A6FD1E
+:107990005AF87E41E535C37E4FE2BFB8DF5C41BB9C
+:1079A0007EBE425B640B2E61356E80E78229AC1689
+:1079B0009F921F9EAA0C8DC6F6BB0C91C77F4A7C76
+:1079C0003095F8C1297B380DFD4AB9C2AF77CA1D81
+:1079D0004E433E7746C4EDB01ECBF37B401E005DA8
+:1079E0007FF89191E4424BE8A5343CAF53CF5874F3
+:1079F0003A38970FBB33AAD11F742AF4AB34DCD7C3
+:107A0000C9504635FAF506E213C9FC4DEA0347F1C1
+:107A10009F5782DEE3D4263811BE1864C8017993DB
+:107A2000D15CD6DC0FDDCB7E4E637319E66944BFB3
+:107A30006FF3209F9DEA74D3FB3A858F877F18DF11
+:107A4000FBE460C6363CFF837B4B06A19EF00973C6
+:107A50000F42BEBD20CB7B33CEE7AAEEA5B8BE6BEE
+:107A600022F3B4429F77F59E3BED00B7DB19C82D9A
+:107A70007C96FB8CE46F69CBA475CD525958053CBC
+:107A80009D8572753495498F99B55909B6C23A6E7C
+:107A90005F9BB8CF399DA6D8F9C27FF31830442434
+:107AA000A0CD71ED60FC79283F017EF3CD2C9C02C6
+:107AB000E3CE7F34B1DF0216A6F5343CF5A5A93F2D
+:107AC000387E2EE0B8204BF33BA1AC4C31D3BA7ECC
+:107AD000F0B442F2CD29FC8CD1070705311EB64027
+:107AE000C8EBD9A6BDB41EFF5D75DAED8037679689
+:107AF000CCD26ECFE0292364976D50080F17D4B015
+:107B00007001AC6F418F121E85FAC45BFC9CE4B817
+:107B10006C0B6F77ABD07766035C507F18F79412CD
+:107B20004805FE39DB0CA61CF211B13FAC1F04E581
+:107B30007AD641FB6A64115AC75A3C47EECFA3F587
+:107B40007FFE163FBF71F55BF5B8A8837B2B28FE3F
+:107B5000F729F3D039825EC22CE9E7E309C25D8BD5
+:107B60008353FDE6C4327B34AE3C18E10AE5387835
+:107B700037EDF8D2A4F503E707FBE44970C4E451FC
+:107B8000EC3CBDF788388707BF3D2707F9C07DA8C3
+:107B9000BFE68A012A916F32E9D7089B617CEBE549
+:107BA0002CC1CF01FA15959F704E9BB8219FB1F55E
+:107BB000061FC50B66E9BD0730B49592ED7B1AF13F
+:107BC00076964E2B54891F682564EF2EE1E7F1D09D
+:107BD00098E611CDFDD8B972FDEB95505887FCE0C1
+:107BE00005AE1FA496470DBE383A7B45F0B941FB60
+:107BF0002207F2105F9E55C82FBF51616D0AC0D990
+:107C000005C782F260A372F400CA8F8DD7BB592BCF
+:107C1000D497EF98BCF065B295AD94D7D3B8A34A8A
+:107C2000DF68A3FD737D35A579AB0EEAB36F2B1D1D
+:107C3000837402FBBE6D0ABC7F5DD06D8E8DE383C5
+:107C40006B79A07811FA65F77917BE8CF43DCA4AB2
+:107C5000FEAF6C80556A3A3DDB510F75B11605DBFE
+:107C6000ADCC5478DE411D9BFECB918435EAA074E7
+:107C7000FE3C0C4F45656DE8CFCD5641AFE5EFDBDF
+:107C8000709E07D3F8BA3275FADB26A35E3D86975D
+:107C9000D3972ADA3642FE75B4AE6C13ABC57DE3DA
+:107CA0007BD4C361195A37D507094ED9E39BCB70F2
+:107CB0001DD943F8D3690CE7E338AFF7E1894F8763
+:107CC000FC7AB190BB8BB75667237F7DFD945945F5
+:107CD0003EFABA4BEA8F611BEA8F6C68296F2FE47A
+:107CE000DBE2B2F1D988F7CEC2C476670CDAA0CB5A
+:107CF000514E1CD253BCE7339B36C801EDAE32B2B5
+:107D00007EF3ECBE10E7EA3FA7B0609CDFC03FFD0A
+:107D10002CE9E7FE736AC2FB53CBCC2C18E737681B
+:107D2000A8DF3701DB35B2DE95888F8DA114168C64
+:107D3000A38FABACFDCF2BE9C27F4ECF02FDCE6B44
+:107D40004C7C7F2E830532FA6B9795F81EF6915086
+:107D5000DEF9D7BE7DE07B561949433FEA2494877C
+:107D6000503E13D4050CC0875E37703977DA1E4950
+:107D70009083A7DD112E07D14F64E37AFA643C6744
+:107D8000359A362535368FACC7FEE971FB3D3DDDB2
+:107D9000C8C2743E515A07C22F309CB14D3D1F1BC3
+:107DA000313FA6A1672FC14FE24D3C1C03F171A7E3
+:107DB000D6DEB00E784665E64FD78C1C0128B84F4A
+:107DC000F287AE35E8E7CCD2EB12F8454A791FFFCF
+:107DD0002076F52046C188DF6C59837ED25899B74A
+:107DE0008FF57F78620D8C573E92F7AFCE0CBEB602
+:107DF0009C92443A38FF55A385DED4B8B239A96CB9
+:107E000083F2A8B8B23DA9DE9954EF4A2AE7F3F607
+:107E1000A752C3857A0F6337663E3A5105BE792A69
+:107E2000273C03F3C6D6B63E3EB106F859633997F0
+:107E3000CF4D3D8A877C7F027E4D1EAE37DA3C11E6
+:107E400023E6ABA594F71E40FED2B053B12B400FF2
+:107E5000B6507798CAD8CF1DD72FA450BF86D0511F
+:107E6000EA37E0F8A53AA2F735A5C778BBD0FBA45E
+:107E700007AC6A5B48F179197FD6339F96A7C4E2B5
+:107E8000CF92CF9ECED15E223EBB5BB1237DF6E189
+:107E9000298E1BE7F791EDFF38AAE7B7A866A42C57
+:107EA000FEB805F5D93F35BE3F16F5BB3F0A79B29E
+:107EB0005E098EC0793731DF089497DF6F1CB657A3
+:107EC00007ED8E18225D18635B9BD93311F3E88EA2
+:107ED000A4460A300FEFDE070F103C8F6446BA103D
+:107EE0009EC71F7C85D717440A30EFEEFECC4F7833
+:107EF0007958A40BCBBB1EFC132F8F8A14E8A1FF6B
+:107F0000E0C0918935D0FF317BFF74DD9AC9F57BE4
+:107F1000B9BE2B866A3FC9447BB581CBA12EB089FF
+:107F2000CCC03767CC3FF9F463008719FF9242FC5D
+:107F3000ECB153532772FD3CE0552BD07FCBFF486B
+:107F40004E12BF57C96ECE41D9981E3B8FD4C25E28
+:107F500037C9914B9ABB51DFC89E3192E4488D538B
+:107F6000FB0BCE2B9FF7E7C113DAFF25D3CEF9B772
+:107F70005E47F1ECEC1FA5927E769F85EF07E886C1
+:107F8000CED726CE6383D8CF864C6E57363AAFA570
+:107F9000716E15FA74E7EAE0131680FFDB324F6664
+:107FA0001DD7CFBFBB15F80AF0F14E879683FCE4CE
+:107FB000BB22EF4DF20F7C9F1E6797749641D91636
+:107FC000B33F3B276B3956273EB37418B791FCA8D3
+:107FD000B398F7937229BB95CF9B7DDF886DB88FDF
+:107FE0001495FB9F664F2FD9D6427AC1145A2FD3CE
+:107FF000B41C05C63B3E6FB00EFD52F27CA60FD5F9
+:108000007E89F0B955F8F5E539C9F3FC8BD8F72C22
+:108010003DE815B0CF77B37C341EE819A385FF8BFC
+:10802000F48CBFE019C7C197A991B1F8FEFF2338BE
+:10803000FDFEEB8053E312E017BA8BE017027EEBF4
+:1080400095B0219BF30BB2A7F13DCA9D5F3A7D1F0E
+:1080500066C6E5C7CCF85123E995725D293F7CBE21
+:10806000F63BEC7C3A4BD6FB3EC7F38AD34F3DD26E
+:108070008F29E639F2B699E216478C21E29B47C078
+:108080001E6A41FE22E2EE15FFB2E075B407E5B8C4
+:10809000DFCDD2737FB03C77C5DB3DA718F35058D6
+:1080A000C08CFB986CA4739772B7D3C1F34A3AEFB4
+:1080B000CAA3BC92332CC2C81F5AC9883F021E50A3
+:1080C0007DF4962CA27F681FB060FB7997507BC02F
+:1080D0008B00F1875BAC64BF74629C1AEB6F290D57
+:1080E000621E0CDACD846FF374346F3FF8C2FDCD9D
+:1080F000C3799E85C49BAC56EED761AA367A729C32
+:108100009CBF228B9F734A79E4D9DFA35EBBD64222
+:108110007A2DCA588A097564D33870FEEE2CEE1792
+:10812000203CBBFDDE5491CFE6A940B8AE4AE578CD
+:10813000B9D9C2E3559B418F26BE28F057E6D3F943
+:1081400084BE17A9D7A5A1BE303AABCFDFA0A1FD51
+:108150004FFE72A89F19518EA2DD3633A00F9BD01F
+:108160000E6BBF568BC4D931F887F1BEDB045F6557
+:108170001B18F90F6FC37E6938BE350DE39BB761DD
+:108180007FF4D72EBD36218EA76571FA96EB4BE6AC
+:10819000FB5A96F04B763CA4C5CF23C74F1E0FEC7D
+:1081A000D12A840FC0393C08CFB7454FE797BCCEE2
+:1081B000C806EEF78E6C2822BC93E30DB4CE3FEBDD
+:1081C000A377282007E78CE776BAB47F660B3B9A43
+:1081D0002D4DB4EFD0CFD257D69F5F4EB617313E5C
+:1081E0009FD89EEB2D2923A346A25BB792B07E09B0
+:1081F000AF81E030F72BC24DCABD872C4007E9683C
+:10820000862B84BF1BEE4A2139E6340647205E2DBB
+:10821000CA7253BB4D9827437295DBCD9FBE2EFD8E
+:108220001E89F6B2DF1ADD82F0F25B19D1D3E9DDE7
+:10823000A9443F6C686406E6999DD9656288BF4D84
+:108240004AA404F9D66945ABA3762D296EA423E987
+:108250005778F739EE57F02324617DFEC07F529E98
+:10826000937F67A21D7D1AFEAB07BC3FAD8B54E028
+:1082700078921F801EAD917E54CFE33F4D3A164059
+:108280003BEB2ADDCC799CCE73D9367A7FB464512E
+:108290009C9E0EEDF62BE91C7D906E1A041C9B74BF
+:1082A000C7A85D03E62B213CD1DE423F1956C6F933
+:1082B000759BD67E48F9524D3B12CFBB21860FCA23
+:1082C000970AF68BC30FA2E780E0078CFB3B6A7826
+:1082D000FC3A5594536A7B297FCA2FFC1F99FB22D5
+:1082E0001390AFA49687D84C78FA4F707D635CCF1B
+:1082F000D697D0AE76D4F6162019F8859F509EB743
+:108300005CE7953DEBC8DF21F59438BB73C494045A
+:10831000BFC372EA87762CCE17C1573988065CBE78
+:10832000AD17F22D050D6294831DC3490EA29C4228
+:10833000FE24ED60E457C82752B2ABF720BD3E9251
+:108340005DFD02E76B8067A8D7A35175E5C0FE3DD0
+:10835000091FD90EEDE17FE4BF7B55E0ADF4ABD34F
+:108360008ACA31DF3A53FAEB28AEB748716723DE89
+:10837000BEA7F7915F6E2E0B909F681EFAC3E0D9DF
+:1083800020E87D8EF02FCD117E25F4F7C6C71FD1D2
+:10839000EF1A5F9ECF7A39DFD86E8AE5E5A01FA875
+:1083A00086855361BC46F453E13394D8AF8945A91F
+:1083B0009F7FE797A684F86627DFF76DE2FC1D35FF
+:1083C000413DF2898D16EE9F92FC63DC52EEC71A96
+:1083D00034462B5E8178FEAA81FC1B7F11E7D6E72D
+:1083E0002FCDAA7E290BE064D5F37B6CD11526E254
+:1083F0009BC7411E770BBFCA14B44397310DF3DE00
+:10840000996A2F8CB753E573CD2E4B3DE2CF67426F
+:108410009EC9F7DBB30CB41EF237115F4E21B90BC6
+:10842000EC6334E257C5602917D968F4731D1576DB
+:1084300073D3CD361F8E17D1717EA3647339A564B3
+:10844000F3BC3E59EEB3F304FEC8B821FA7DE2FD59
+:10845000EEE6BEF6EB843EC968BFEBE789BCF03EB2
+:108460003CD6115F4A19E925FE7B95AE9AF852F485
+:10847000039B1BE152FB61C33CDCC727D3AD74FFF8
+:10848000EF76E10776653B687CE9F7BD503CAD7659
+:10849000CD08E297B27D1E1A2863CFF71FEF127C3A
+:1084A0006C17E3EB0D9CB0F23C15950590AFED0A0F
+:1084B0008D08E27AEB84FF01F51BE4AFD167F9394F
+:1084C0003295EB43BB7A460511DF8F1A7C1B67A3FD
+:1084D0003FA7DB407E39A6069F781CC7D993E3C12E
+:1084E000BCA1D3BAE8965F43BB5D277E9E8771A28D
+:1084F0005DC25FDF600C9790DE2CF2241BD2C22598
+:10850000E8077A519C578315CAF03EC3E22BCF1E71
+:108510001B8BA7613F7C7F2CC8F5F2638CE3416025
+:108520002D8F97027C7366E37A5767533C0ECF0515
+:10853000CFE1DDDDA3685FEB0DA2FD0B0AB557A609
+:1085400094CE20B9B0C69481F03FE335529EAFFF80
+:108550003EAE37CED2B9B72C415EB92785F637BBD0
+:10856000F310C549FCF7CEA5FB93FEF94B6F62FFF4
+:10857000207E807225DEEF7D9A450BC91EAE1F1C42
+:108580000AC33A4EF78CF0F0F01FBF8FD324F249A4
+:108590008F1B9886EB8EEE3604FBBB2738D0F8E4B1
+:1085A00040ACE0F28DFCE3F1711A920789719B0BEC
+:1085B000954F1B222577C1FC6B337C73B2E3F445E6
+:1085C000FF9E1CE277EFDEF3D742D22B3A789CE194
+:1085D000B8419B8174E2A8091B67C6E9613FC916CF
+:1085E000F68749E88FC007E3E95ED6575427D2994A
+:1085F0007CFE389BEB21A922AFE0FC7A99B736D5F7
+:1086000084F293BB96705C37BD2F12F1BA7127A22A
+:108610007B313FAB215446F1C0A2A561A24B8077CC
+:1086200018F5FFE31B53393F816DE238732A19E9CE
+:10863000AF73F43C4F628E09F4612EC7A9FD7B1B1A
+:10864000B3090E15CBB91E187D5621BE28E39675C9
+:108650008CF77FBEED68400FEDEBB62B65C05A5925
+:108660005D5B15E551CCDF5C4CE73F4EF0DF5926F2
+:10867000AD6423E2DBF33CEE05F391DEDD80B9620D
+:1086800063882F19511ED66F5718DE3796FB4F8E11
+:1086900013B260629C665C88F36F941B2C4E5F93F0
+:1086A0007208E5054BD22313F12220E257FC7C7EB1
+:1086B0002EE02AF93F41EC1FC841D0A79F44FCA9F6
+:1086C000A8E6F417ED5608CE8DAC99C795841CEA40
+:1086D0005B8F9063EFE9B9DC9C635A47CF305E1E35
+:1086E0001B8B7230C2E520C835E48B03E14578006E
+:1086F000BC90F8B017F701E3359C60E16FC07C0DCA
+:108700004B59B871347FA68E26B9CCE5B399CB67A7
+:108710007C5A2F424E27CBE764799C2C87510CA1C1
+:10872000BC957810EFA7477D64DCD2A09EFB61F377
+:10873000ED981F28CFA5D1A91DCE1B1BD3B7FC8751
+:10874000CD66F76558F6B2C136F42F55DD5E00FBF5
+:10875000F7ABFC9E720AC0692BBCEF12FAF9E40277
+:10876000BE7F97C80332A85E5666C373EA257B3A7C
+:108770009AC928AF5BC2B72B15FA8DC17E5CFEF596
+:10878000F537B3366B5CFFEA5D16922F675F48A53D
+:10879000FB684CF5153960BCAC3F829E0EE5D3BB3F
+:1087A0005249BE9F16FCDE29FD166C259DD76778C1
+:1087B000CE998875D579E8FF65CAC43C46F7B4B947
+:1087C000DED8E818C86F2FEA8B7B6FE6786622390F
+:1087D0007BD611B913CBB01ECA333E25CEDDBF63A5
+:1087E0007CD98F303FC06BF370A8FACA506F30E964
+:1087F00017DF6CD6E37DFDA5D1BB601F8D0536CAA2
+:108800005FAE297AE777B740F9831D06BAE738EFFC
+:10881000B1A983C2D84DD55CFDC9E7794143C2FDFA
+:10882000B905DB13CB8DA1C4B23FE9BEFC9277B68C
+:10883000BEB63FAE3ED395EAA4F377330FE65F337F
+:10884000FDF706F9FAE197F2F9D765C1D7F60FA35C
+:10885000FCB57C17CFCB31A25E3313F1A19F7E6FA5
+:108860000ABDC6646A3E8179F0A6174D74AFFE4416
+:10887000B66F18F66FD2450FE0799A8A4E8D463959
+:10888000585DF4778AA79DFD31F3207CCE5AAA4823
+:10889000BF39BBD1E246FBACB3D04678D0B947096B
+:1088A0002A5C7F9F34B602E3A7B407E6DF70FD07BA
+:1088B000FCD20633F37BF860BDB890CF68644FBD3F
+:1088C00037D96A5F0EFDEA377079DBC07AD3900F33
+:1088D000CC7771FEE3D73F6534C33F8BDBB4112DFA
+:1088E000B0DE055E2BDDD751BF50E99EFA2A1C325F
+:1088F0004EFFAF72093FA93962ACC2F9FFBEB8168C
+:108900005D63D2CF6532F834BC1766D85916CE8372
+:10891000577397BC44764E5F1C7A37E75B73EFDA88
+:108920004BEF9529B5B4DFF760BF089797369A6883
+:10893000BFEF15D8C8CE7CAF8BDBBF73EDC6A09957
+:10894000F48D7319789FF6BD2E03DD633F1F1ED78C
+:10895000D1BDD6F737BF427EB8F7199F37B0434F26
+:10896000FACAFBF6684518E1E86E4E437DB77EC350
+:108970003CBA173BB74BEF457E36B7EB8E5F5F894E
+:10898000FEA329B796E396AE712CCE72DB62F55248
+:108990004F55D32B1F473ABCE68BF1BDD7A0BED4B1
+:1089A000057452CCF3EE514FDFDF751DE9A5732737
+:1089B0005B1DB82FF7E6C726A0FC787F722EDDE39B
+:1089C0009DFBB4C2F0D30D731D4BB2F0FD5C45F5B9
+:1089D000F6874FCCC5FD6D5545364F18FBFD564FFC
+:1089E0007802747533CACFC62E03E9BDFBA7BCFD60
+:1089F000BB5B9C31BA52A66CB8691CB6FF9981DA90
+:108A0000F7E93B9B6F94F8C2C215685771B825D33C
+:108A100099A9686909AE2B99DEE62E6F2EE1F1ABBC
+:108A2000AF46776C33BFD7DBE652D897BAAF4477FF
+:108A300077BBC65E3CDDB1FCF4047BEA7CFE16200D
+:108A40003C95FE7FB387698FD928DEAB29C07F773D
+:108A5000B8F8BDF51D2E7EBF4DFD8F45DBDF00F85C
+:108A600054BA7C5DB88E22A695A1DC7447EDD5780A
+:108A700017C926F439B6D924ED00D2EFD767B2C7AB
+:108A8000D7C4F91F422E6E27011F781CC739FD87F6
+:108A9000BF1FC0736A2A3C351AFDBEFE739F51BCCE
+:108AA000D0D6C3E3CD364F94E2F006A797F050F24C
+:108AB00077BF87CB9FF3E0E5E2F73BFCCE288DF351
+:108AC000560EE7CF9D22BEB2698995FCA99B9C41B9
+:108AD0000BF72F0418CAA749957A1E2713FAD68DCB
+:108AE000C21F692E7F89617C8C5DCDF3C2DE287F39
+:108AF00049CD80F2AF2BAFF5D07DBEF247DA07E368
+:108B0000BEAF3688FA21F4BD8D7FD7AAA87E914BDF
+:108B1000EF46FA9E54CEF322597D1AF94DDE287F96
+:108B2000D7797BDCFABDCCECB601DE4C01628DCF8F
+:108B3000C3BBE96A8BDB16873F9F7428B55CEF7572
+:108B40000F9A368AFB45481E9727C26391CB48F39C
+:108B50003E925D7508E17CCD37F9799C7CDA14444E
+:108B60003E7852DC8F49865FC425F0471D9110B7CF
+:108B7000771A438528273F5412FBCD6FD753DC7CEF
+:108B80005EBBC28230DFC9279E2F447EFEC163CF09
+:108B900017CE8C5B4F723FF93C29E7137EC1643FCF
+:108BA000EF40FE5DD9EECC06E6330F89B53F53FFAB
+:108BB00037F2EFCEEC11FE614D1BEA447B48B44F17
+:108BC0001E2F3397F36B65A7427E0FE9DF3C76F0EB
+:108BD000118CA4F49D9FA5A758179FCF289FE3C48D
+:108BE000B94DC57383AD58DA7979A0F31A881E7F21
+:108BF00021E4903CB763ED4306211C8D4D3695F181
+:108C00007B6AA5A8AF7731AB07E9E9AF22AFD56999
+:108C10008527E869C65C970DF999FC2EC00FAD69F0
+:108C2000DBF0F95791F7EAB4C213C629C82DA5F1B4
+:108C3000FEAAF3925DF7437D07DD5F74093AC966CA
+:108C40006145C14F1D2C784EA1BCAFF6447867B585
+:108C5000723912AD3392FC9270BF6AE69D64BFF622
+:108C6000735E1B108F722BF9BBC939C5C2DF11A10E
+:108C70003882A592D9D1BE6FBD3240EB90E7E5E7CF
+:108C8000CD99D2A390FE8CF92F29E9142F0D8827B6
+:108C9000B3A5B3BEF8418AB0775952BC201BF46E1D
+:108CA0006C27D70965CAA3B9CF11EA28E1F156D2DA
+:108CB0004B715C7C3F73A44AFE766C671C7361FC4D
+:108CC000EBC35391973849BEAFB7F61B9F9884F713
+:108CD00083F01C403EA25EC83C8684FB419B419FC2
+:108CE000463B4DC67FF5BA50998BEC93DE08FA4FA0
+:108CF0008C156637CADB147DA814CF2F391E0CEDF6
+:108D00008A791E42BE03E58CBCFFD3B464BC17E372
+:108D100054A07F04CC787E93F9F935DD5545EF9565
+:108D200029A52D885FFEA58CBE5330BEA79BF2A45B
+:108D3000FCB55C1FF3EF3C6A6480BF33853F870955
+:108D4000FF739638D76342FF8EC5BB225B30EFBB03
+:108D5000735E3EDDF74DCE2BF9AAF1CE33A900901C
+:108D6000CBE2E25883CC5CCE88F397F42DE35AA98A
+:108D700023BDC5A889FF2E3BFA2BEBD8AF90371245
+:108D80003878CF3FCE1B997613E68D9851CB17F5E7
+:108D9000B80C90A37DF7F92C6E8A7BF5D5E3771894
+:108DA000CC3B15717F8FDD74ED50CA3715E5D7D6F2
+:108DB00062DEF87D1696305FFCFAD4A4F10D30BE69
+:108DC000CD2DDA074EDE70AD4AF15F513F712DE6D1
+:108DD000C9DC67481C8F5050DE3F34C7E6BB7DF3CB
+:108DE000867BD6E6C7E439C8F78D396363727DD5D3
+:108DF000DB933A2E73237D7D4AF9BB523EFB9D3CAB
+:108E00008F24998F3D9AA348BD78028ADC55D317E9
+:108E1000D2770BFAE2BF3D751AEAC332FEEB5FEA86
+:108E2000A53C5ED007B6E7903E70EABDBD0CF5CE1E
+:108E3000936417F8CFA9DC4F047A057E87C6DC530C
+:108E400045FE504C4F1D1677FEF3859C421D1EE9D2
+:108E5000C1BFF93B8FE9B13E57EBCEC98CD987C969
+:108E6000EB7D2D87E7B9FB4BAB37223F608F2AF4B0
+:108E70001DA835A59F90DED1F4C2B563E3F3D0E71A
+:108E8000ED7C90E7316F37F4BBFFD772F877629AC9
+:108E90005E7896FC9D2783FCFA4CBD1A5C8D7A683F
+:108EA0007DBD0E352F561EACBB85F481E9B00FD8C1
+:108EB000572887C3C7BF7D6A00F3E2FDF09F02AF6A
+:108EC0003679E7905DB069BAD986711C7FE9CC85A7
+:108ED00084FF76AB86FB4F5E672CCE6CA5FBCB6B1D
+:108EE000761A6A518FAA00BDE95F61BD05E9136B6F
+:108EF0003DC097F2F4DD653FB061DCBD7FB9ECCFDA
+:108F0000E3E7D8A67803DF2A273F278BCFE329DAC8
+:108F1000C9F5B3A339C604BFFAD11C95E07975A091
+:108F2000773CE2DC1E3592827AB29F691FA3FDCBAB
+:108F3000BC3637F977198FB33B97B9C9BF6B764603
+:108F4000EEBE8CF42895E2CCD2BE38FD02F78B4DF4
+:108F5000CDF59D46FCA8D0471EF816C2ED6E55F81B
+:108F600089399F299C6A1B837E2C8B33F240AD9BF1
+:108F7000F26FC82F31E81B6D740E7B9CCC8EF019FC
+:108F80001FA85395383923F9C6F8BEFB3B4EF29F14
+:108F90005673B6C686C169BD6726146DFB3223A61B
+:108FA000271CFCFB34155F4AFD4167F6919D533346
+:108FB0001DEC46C4BB95D1033AF4D73B7B497F6C8B
+:108FC0000C29344F63E92F293F6E81C8C3EACB8750
+:108FD0005223941F66CE4D117EA6368E97AC97EC29
+:108FE00062F614873FC84DCA1B8BE9F12DD44E8E13
+:108FF0006714718646E1C70140517D46AE22C65DC9
+:109000009E189F10F332D55D11EF77583F19240950
+:10901000ADCB9D86EBBDD7EACDCF85F6C7EA75040B
+:10902000A263ED29F45DAAF54AAF86FEC84019CFC8
+:10903000A74DC6A33231EFA07DD109284FA22F0C36
+:10904000944FCBF367378EBD84F2D0CB777E3C0153
+:10905000F183D532A2C7A69D17974F5B81E731F602
+:10906000FFA17C5A8FA26D83E775B98EC47C5A0F1D
+:109070003F2F19D74CCEA33D9D135679BE5B64CBD1
+:109080006368B7EF34519EC8A49DAF1C46BFE62469
+:10909000330B519C37497F38E29CEACD8579CE7CF1
+:1090A000F4DE96150CF3B09FF3F07B9989FAC0407B
+:1090B000F600C53AE2ECC699126FBE267B40F26B11
+:1090C000BFB0AF3E54A2F796E0FE76EBEDFDDDA318
+:1090D000F1E7CAF8D80079203DFDE781C87B66B585
+:1090E00091E284B8D55D7D74F0D5E2604B5176F69F
+:1090F000130753455E97AA70D6C11C3CEF47C6C103
+:10910000D4EE1114DF32C5E26061D64F1C4C1571EC
+:10911000A55506AD8EFC34BB4D6E6E477B897FB581
+:1091200075677A90BFF9E79F7C063F05A03A26B89D
+:10913000506F6813F06FB8F838D883B9FDC4C1B662
+:109140000ABDEDDD525DD80870DDCA38FF0DF4C8E8
+:1091500078988EECDAE83D05B46E658A99D6FDEE16
+:109160001ED336F44FCD9271AE3DDCBF364BC4B347
+:10917000DE9D5242FEA781E03CAB3D315EF0330103
+:10918000E7B3962AF2D3DF79FF64F2CFCF41FFFE37
+:1091900090D87D0926FC7CEE767E9FDEBD5DA1EF3A
+:1091A00099229AE84827B5D3774D17001BDD84AC88
+:1091B0003700587305BC56740AEA43EE362883D24A
+:1091C000AFAE56032E68B7F5700AF9155739DD2290
+:1091D0006F8DC79D036B95E0303E2E7DC72CD0A6CA
+:1091E000D3709C5772B93FEACFB9C67EBF23D16610
+:1091F00010F163315F0B837387A74EE1CF55E23BDC
+:1092000079C9F090E3B5199ACDE8DF8B16F0EFA19C
+:109210009C356AD3C9EF9C5E42DF3D6A4B6D6EAFF1
+:10922000E5F544B3672D512FD57F43E50A2973A790
+:10923000E37A77E772FD2619CEB33B12CBC9719F53
+:10924000E47B5AB3986F78CE90F3EF31ED16FCF6CD
+:10925000EC9A62712E1E8AA3B419DCBF29A6F829E4
+:10926000FFAE514B3E879BAE803F073B6AE8FB74E5
+:10927000402F5C8F637CFD83BFE154905EDA1C1C41
+:109280006FFFA7EB4E5EEFFBB9251CBE0E4EAF6D18
+:10929000AB952087175FF7C5FA490C795F2F5F7C84
+:1092A00057F13C1E2EA67EC41F02F71888EE765991
+:1092B000F8FD4BC9AF28B107ED4F61EF0E42651ABB
+:1092C000E3A12756D2F78936D50F4EC378E9F8A91E
+:1092D00036DA47D31E7EBFB77169A410F1BAA93A36
+:1092E00052D2DC0F5C710255F2576837D3C9F87758
+:1092F0006EDA13E37FC971DDB5195A415E26DA4B88
+:10930000EF76BF82E7DD6D21F9DAB434FA38FA0F6F
+:109310007C19BEA1587FEAAEB727286EEA46FAFC50
+:1093200099DDC3E95EE2CCB6C47B5E6C6D625C9194
+:10933000B5A7F3FB6C9D89EFF13E5342BFF3E28C7E
+:109340005CBF596FF48D40FDF39A6FF23C8A8FE653
+:10935000E9189EEB47167EFE817B5205BFF694C44A
+:10936000CB83AA01CF17DA8DC4783ECF1F95ED1BB2
+:10937000F17CE15C1BC4F97EF4EC152578BEA7BA3C
+:10938000AF28C1F35D6FE8D0903E52B27DD7629CAA
+:10939000EDF8B55ED20F65BEECC5E2DDB4BCAFD76B
+:1093A0003FF755E5719D9CFF2BCA63FC8BF79BEC47
+:1093B000F9BB3E6021F9C2EFB5C6FC7727E9FB5E39
+:1093C00067CEE914E4C7038DF789B0975C66164051
+:1093D0003DACA23A42FD2AFEA663A80F4A3D387969
+:1093E000FD8BC5B9AEC8D30EA35D28FDBDF5626C7B
+:1093F00073F053AE6F3FAA903FD7EC0EA48D23FBC2
+:109400006AF6E57AE22FFF4AF725588F62473B65F7
+:10941000DEA32D547F7AE72CAAD799C361B4C71A6B
+:10942000A11ECBABAE4ECC7F36EEE0F12069FFC281
+:109430003ADEC275A438A346C4CF26D4AF61894DA5
+:109440002AF77B37399927C0501F4EB417655C77D0
+:1094500093977F3F66538F42DF91CA32FA8AF3F1C6
+:109460005C93E2BBF7E769DD887732CEBE204BEB39
+:10947000CCE3F9678508A79FE2A2A01C31C87B5BFB
+:1094800089F70F0FEEBD99F4A1CF997750FFF968D6
+:10949000C184F8FB1C714F748EB8278A7C3A9CC437
+:1094A000A7E3CB0D71F968E1FEF20AE2F2D1E2FB2B
+:1094B000C5E7A38513F819A7FF6CFD228A7BFB0182
+:1094C000CF978C89E16103137F1BA2EFD2FD97ED4B
+:1094D00026F2AB35887C547FFD31B257FC789F86ED
+:1094E000D3A3C6EF61737DA801EC40CACB0D25E67E
+:1094F000AD1EFC9AE953B61BC87FFE66123DCA7DBD
+:10950000C97D34F4289C7E92D6996CFF26FBC1A5B8
+:10951000FD7AB17CE9FDAF591E7E55BEF4D9D7C4A2
+:1095200097CE8B270C8DA679BE8678C207EE8E2C3F
+:109530007429CAFCE1F6DD3C7F7882DEA6F1F8A54D
+:109540009EE73724C771DD13284E29E3C6E6E7F40A
+:10955000C1E5C5D4DE83795F8DBB5329DFA0DE5D15
+:109560004F7A7772FC723EEB9E8047F1397B9DEE1D
+:109570006FFD4FF306F2F3C57789DDACF82BE60DEE
+:109580000CC9FF0AF1CB976C9F66F8E2F0A57A242C
+:1095900028F02307CEEB2ACBE7F89722F24BCC6AD0
+:1095A0008039E2FA0FD4EFCA7CAE1FBF24F291EEED
+:1095B0004B4DA17BFF2E23BFAFE0D2F1BC2996EB30
+:1095C000BD2A3F13E5013FCF875FF80EC3FB670F4E
+:1095D0001B42740F3FD068F3A01C937E2739FE8393
+:1095E000397C3F174B47DEFCFF5DFE71AB9CEF62A1
+:1095F000E36F1B000671F4954C0F03F51B88BF2C1D
+:10960000C8F7CEC9277B5C1B4D718B8BE44B29E5DA
+:10961000C0B7514EEF30B9D17E403F0AC9C7B53906
+:10962000D2FEE6DF25B8AF80E4D747166E4FC8FB01
+:109630003F72FF3F1910DEFF9C9EF76E96378078D1
+:109640007EBC4AA3FB03AB52B97C893EC1F387922F
+:10965000EFC124CB15798F43CE777FFEFF2D5F7D41
+:1096600058C2E77FC85741CE92FD32609CF6BCFEDF
+:109670000191C7D9AB897C19BA0F21D7E5EFE579FC
+:1096800077BF10EB93EFD70939F059BE1642BC3AB9
+:10969000F507B319E3A0E5E59C7F36796D144768BB
+:1096A0000AF1FC9AA6A58CEC7E79DFB5D2E5DB85C4
+:1096B000FD56BD6DA3EF9E36EDDCDA3E98F20F7CD1
+:1096C000A4DF9DFE037F7F22DBB707DBF9974612FD
+:1096D000E215155F7EBAB2B69CD64B76BBD39478B2
+:1096E0008F2892CFF386E4F34F7DF005FB04FA9DBB
+:1096F000AAE779DE7EA766AFA2BC03EE0F4F71F733
+:10970000921FA8690709094649A758FFA37CC29B75
+:10971000A61D5565F4FD8190A58CBE5FF347FEBD87
+:10972000A75377E506F5DC7FFE5B5C6F6A79F07A1C
+:10973000D4338B601E54494F755F5F46FEC124BA17
+:1097400093F4D6777FF4BBE660AB12A3C7F5062E81
+:1097500027A57C7B39DFCDFDD54E913FD83399CD00
+:10976000B6C5CA3667625EE58ABC6B5FC6F5BC9C4F
+:10977000CFE30532CE5E6C06EB73F0F978582CE23D
+:10978000EC93457E040B98637911832F1C6797EB4C
+:10979000936519674F39277E5FC06E24BC486DE71B
+:1097A0007C83015EA09E7D75B4773CDEDB1ADA19FE
+:1097B000BE1AE13508C14F79AA91BB2FC3F845867F
+:1097C0007A35C62FB62C19B30FE3AAEAEADE6FE0AA
+:1097D000D1B83BECD5686256BABCBA02E22FCDA52F
+:1097E00088FFD5BF35F07CC6D52924EF3B0B1B285D
+:1097F0009FF1F4DBA6847B3AC9CF005BEE42BFD178
+:10980000E0F637297E90BA43E9374FB5AAC046FB48
+:10981000C4F6E8874A6DEF0D54A25FE51E857F3BD5
+:109820001256AFB8D0FE5775A877CCDAC9EF7DCF06
+:10983000EA70549B899F2A3CFE72B593F8A4BAFA49
+:10984000061DDA696A0BA3EFB45516703FF6B04EE9
+:10985000BB0ECFFDDFBED0F71B571B5E10CB8F4377
+:1098600070359AA2075CC5B178A0CC8B1BE8FBE7EA
+:10987000521E25EBB3E7E9B1421EF5E9F349783C06
+:10988000503F89DF129FFFCDC0480FFB37C54CF713
+:10989000C1245EB7C93CFF2FB85FB748E4DB1C5B4F
+:1098A000F39FA3F97D77194F09F23C294364651EA4
+:1098B000C12BF2CD00EE7B8743D73492FC614D344F
+:1098C000CE6AFE7DB5A2F621CB2BCBF169670A2CBF
+:1098D000E1D8AE0545489701C08361FDE081B180C4
+:1098E000DF575157A7D0B9A9EBE8CBD24C7564D15B
+:1098F000B9A90FF2F361057C3F329E2BFD969FE5DF
+:10990000FB6E463CECBBBFB5C4CAEF6F89FBC1A977
+:109910004BDE7E1AEF456D11FEE37D7B2EA5DF85C4
+:1099200038BB5A55504F3DEBA8A3DF41AA2BE0FAB4
+:1099300052AADACBECB678FCDC4779B58377F3FC36
+:109940004055DC7F56573BB7223C6B9C3ECA1FFEFE
+:10995000465B987E3A618FFD38C5E9402FA27BAE09
+:10996000275F50A45E94200FA5DD966C8FDD51F02B
+:10997000BFAB2705E47C5FD5CE6289F6665F7B6965
+:109980003F26DB1349FD07D27F981648C8937940DC
+:109990009CBB94EFB98237CAFC99BEFBCE2C68C140
+:1099A000FB12239028C7C6F28898C82FDAA0583D2A
+:1099B000A82F0D9447D497E7C39A2FE3FEC8E62B50
+:1099C000F029F390649E9105F34D32CECF37B1600C
+:1099D000BE4906FE7E06BF372DF3455A0D6ECA3FBF
+:1099E00009FC98511C5199524BFEBA74AF91F0EF9B
+:1099F0000C0B6EC4EFC707A6D9E87E38DE2742BC41
+:109A00008F2A2E1A777CAD26DBEBB07DDF7708EB53
+:109A100018D5A70FD572500FB3403D7E1FB9EFBECA
+:109A2000F46CFEBDF6E47C1399F724E3C0B9C39F40
+:109A300053D02F8A6E7FCA3FF881E857CCC7E9FC24
+:109A4000BE9BF846562BCF6B8A5EC9ECE897AF9663
+:109A5000FCC79C78AEEB155F31D2E77A2BFF5E40F6
+:109A600017F3B4EBA17C77C160EED761EEBD3A622B
+:109A7000D81DF47B0F9B9CDA6B0599317C92EB62CD
+:109A80001BF8BECFE0FD302536DF99797F2B44FDF2
+:109A9000AABAC7C4F13269FE4D7DDF6B095A509EE8
+:109AA000FCB980F1EF8C26E9BBF2F96789FF822FC0
+:109AB000CBF907DA9FC4CF0BE9F112FF06C2B7401A
+:109AC000B538A72329A47F487CDBB76C3B7D877022
+:109AD000FFB2103DCF5894901EEFD55AA233903369
+:109AE0001EDFF25F37E1F73CCEA4460BF17B20D1BD
+:109AF00087F55E2A67468F6099155DC1CBC3A25B6F
+:109B0000F0FB20590FBFF82D2AE379E63276AE201C
+:109B1000F4AD808DBECBB5B217E55679521E4BD24F
+:109B2000770C52C4EF0765DB8CA44F668BB81EAB75
+:109B3000117A3D46A0A0DC9A5346713C1B73EFE8B6
+:109B4000C5FA7C13FFDE0103FCC7FA61C53C1F8226
+:109B5000F17DB37CE19F669100FD1E60B183FAF751
+:109B6000F1F11D26119FE2F31F7A96C711655E2F52
+:109B700063F602D4876C6E965096DF0161AABD0031
+:109B8000EFFDB74ABF9F28BF98E2CB2D8CD3970E2D
+:109B90005DFBC391F4BB24CFFD6828F2CDEB8C892B
+:109BA000DF7596CF3F14717BE58CF87EE11D29BEF1
+:109BB000218599F8BB243326E0A768A76754191DAF
+:109BC000A4BF3DA1473E9529F0C3318DAFCF51E3EE
+:109BD00055F0F740E4F703337D2AF90998AF538F26
+:109BE0007235F3B897F2051BCCD142FCDD9637CC29
+:109BF000BECB70FCB37547EFA47861EEA12398DF6C
+:109C000071C8D0313E0DE548B1F89E040664A17CD0
+:109C100020AF88ECC13EFE304CA178E6A469FCDEA2
+:109C2000EB441652F19C27D8F93DAC09E5C59E5688
+:109C3000986F92C80F9970D89B86FC6DC277222AC4
+:109C4000FFDE45548DCFC7904FE632B8E3E9E17AA5
+:109C5000775C99E1778E13CB377A12CBDFAAFC625F
+:109C6000787C7994A24DC47DBEA888EF46007FE140
+:109C7000FBE279873F17F6DCA52E662E427F8553DF
+:109C800009A0BD70E9F3B9146779BE9251396BBB75
+:109C9000799B397EFFEB743C0E2DFCE0F2778DB0A2
+:109CA0000EE5ED737FC8227865D980DF3A89FB1015
+:109CB000BEED1374BB4FD069459ED98AFC7F9FC10E
+:109CC000BD99F03CD5EC463FD5DE54237D37B675C3
+:109CD00021FF5D0425CDCC8C30AE7E262F433BF694
+:109CE0004DA8D75798299F649FC8D36EFDB14A7E6F
+:109CF0002EACC7EFF9EAEFB5927FBB26ADF47B58E7
+:109D0000AF4F33D23D89BDA9153E311F7DCFFED166
+:109D10005473187F5F21F9FB9D87705D083758D712
+:109D2000637C1D448FFA0A23E9E1F2DE3A8C43F1A9
+:109D3000377DAE99E6DBE7B0EF45BC6BFD80343D87
+:109D4000A8AF7463FE97C4EF9AB44AFABD12A0BEDE
+:109D5000A1F1DF67D76779DCFCBE2DFF1D8ED2BE77
+:109D6000DFE58069A11DFE861123BAE5F1BC020979
+:109D700077A66AD83E87C932BF6F96D557AE52E9EB
+:109D8000BB418A2CB750F921512FBF37FA4EA19B06
+:109D9000DF4BEE79E53F106F87A6015CE09C3C2924
+:109DA000FDDF777AB290F3F7F3CFAFC2857E7F0500
+:109DB000F73932B6FF7D0E8FCB1B57EEE75C8288FA
+:109DC0006FC9E7B2CFE271A39FEDC2E371B8CA7D5C
+:109DD000E873393CFBF691D1FF3EDE11FB0889FBAD
+:109DE000D9C9F5070B755FF73EFBC5BF7F7A9F5951
+:109DF00089FBFC1AD71951BE8675EA0B617DB6D86E
+:109E0000FAE867C72A906F72FC9B28F29B59696237
+:109E10005E12ABF498B9BE989887749DB2B90DE5FF
+:109E2000EB4322CEFD8AA0AB03293F198AFAD62B39
+:109E3000334AF613BF1DD4D286C425F9B3E4FF67B5
+:109E4000738E566019E44014E5D59D830FCDC0C1D3
+:109E5000F73B1E1A8AF20AF8E6C78599E7AF53D294
+:109E60006FDF7A817E918E24FD26AF5FD211BB29F0
+:109E700044099D5D2C4C4F17E3F9F3A097D0F7D11F
+:109E800099BB20B63F20F209E666BE8F9600ADFB77
+:109E90003AC7039437682DF6198B605DD32FFB9872
+:109EA000BEA3C45C75C3518EC07A4D4563FFEFD627
+:109EB0000BFC2907DF4B3D3F59AFBF501EB95C6714
+:109EC000323F94EB51A66C273DDE0F7A3CCF3357DF
+:109ED00088DFFBEB759C0FEF5448AF6F023983723C
+:109EE0004A7ECFF79A126B1B7E2F729781FB53032A
+:109EF000CF9ADC89DF574ACE3717F6C45226ED05D4
+:109F0000FE1D89463BFF7E9290339D770C96DF576E
+:109F1000E2F210E454C2F795EADC89DF571AC05E1A
+:109F200000BB80F433364827EC022EA73BAF74DB2E
+:109F3000038CFCCFFCF7256F310A7D10609115FB77
+:109F4000FE1BD801F45DBB1B8A8AC5F7B582FCF7FE
+:109F50003C84FE9FEC8F4EC9F6DD8478327BA4569C
+:109F6000883F2D33CBC8FDCD806F9B7B19A64D3626
+:109F70003F8ADF47BD9E35BFA51B42F8360DDB4F3C
+:109F8000BFF463FEDDD418BE7DBB2893CB2514320D
+:109F900017A2E3234EDF0C1CA7D311FA237E3F7DCB
+:109FA000538F89E02DF35293E93B6E3DC70D7C3D05
+:109FB0004EBD9ED63387F03F693D1783F7F1789504
+:109FC000CD387E0F84FF78FF23754C0CFF4729BEE8
+:109FD0003B70DE3E3A58C9EDAEF3D6ADB7D179DF6E
+:109FE0007C0B8FCBF953A49DAC4DCAC9423F249F33
+:109FF000FFE6D51C2F6EAEE37944937B1A290EC77A
+:10A000006A785CCD03FFA3DF8711FC6D9AB3CC8027
+:10A01000A8F739FB9E01FD9CD32625C6DFA69BAF82
+:10A02000A378DFCDD30C09BF8F29E1305DFCFEF6AC
+:10A03000F4A4DFC54C864B72DCAE8F1F88FDE6E1D1
+:10A04000EFC5C0339FF17B3739E277CC3614F5C5C5
+:10A05000F7867FC5F8DEC31C8F2E2EBEB7DF10A596
+:10A06000EF3BBC9C3977F342A09BE13F1D49DF7B6E
+:10A07000BF366BDEA3EBA0FCB34D9750F9E5ACEF18
+:10A080002E3E84F55B4AA85CA3FB7806D24169C5E5
+:10A090002D13F1FBF8FB2D7C1C97D5D789BF9BE2D4
+:10A0A0001A3D780CE60FD718A3D4EE86CB1A2FC72B
+:10A0B0007CA81A2B2FBF5EF6FB31541E2CCA635EA0
+:10A0C000BC04CBFB958F67F4171FBCB45409E3EFB6
+:10A0D000A3D5A4F3F693C63C918BFEA29A6A5EBE0A
+:10A0E000D453B57A08D6EB3E99D19F3EF286B0871D
+:10A0F000A47EED15F4FEBC76B40DEF117A6D8A07DF
+:10A10000EF8B782B8FF2EFAA99795E89572B53F159
+:10A11000BB9BD51AF7F38EB7B5E4205FBCC9672C9B
+:10A12000477FBEDD56DC867AF1A0CAAAB178DEE3AD
+:10A13000CD8CF009E8EA10D1D5151F17A62132DB26
+:10A1400012E94AE2ED64494F35897403FCE0F7FCFB
+:10A150001C13E901C67D87F8C75589F2AA8FDF274E
+:10A16000D16D323E0EA817B0443E18C3D390128F63
+:10A170009F5D48AF9C7E3FC2751875BD6E7C5FA425
+:10A18000782EA1449B01F40BB93E745BB231E7AF6A
+:10A190000BFF54A98FF315D8ED59382FAF877E1ACE
+:10A1A000FE989D5C17CCFF05C167255F4F97D22CA9
+:10A1B0007E1F85DB61D2DFD124F6FBDF798429C3E2
+:10A1C00000800000000000001F8B0800000000005D
+:10A1D000000BE53D097894D5B5F79F7FB6249364CD
+:10A1E000929090100893044280244CC222CAE2B09C
+:10A1F00004A32C0E9B8022FE095BC84202E833B602
+:10A20000D80C844D8B6DA8A8A8A80302A2450C0AFF
+:10A21000881AE8B088585163D5D6A5D244ADEC1061
+:10A2200083B6D8FAEA3BE7DC7B33F3FF498AF4BD17
+:10A23000F77D7DDF83DACBFDEF7ECEB9E79C7BCE69
+:10A24000B977D83ECBB9C64C467F7E48636C503850
+:10A25000F385E53196C8DC6B54153E76CAEDE3CD47
+:10A26000C6D2AE315FF5650C3FFD703D63172D8E94
+:10A27000354A346315E15139AC1F6353ECDE076C8A
+:10A2800026C6A6C6CCB630E8671AF3ED894967EC56
+:10A2900085082DDA3510DA997CFB1B15C6E6328F5E
+:10A2A00095C1F76CC5E3C4EF8C056050C616E23F5C
+:10A2B0005DC17EBB415F0CE6B1D0EE08A839F06FFE
+:10A2C0000FEBD129813145D4638679437D0F8B858E
+:10A2D000F2FA37BE53B0FEAA3A05C7E9CA1A92305D
+:10A2E0004D6295946F5D97613D3591B856C69A73EE
+:10A2F0006DFECD388819FE1BC0D8F1C20CFFFD4A97
+:10A30000705EC7159669867A3E25DCBD3595B1BF6E
+:10A3100086C1FAE17B2701872145FF318145B59D43
+:10A320006F959DD7BB3B3C6A33A6D76784AF30455A
+:10A3300063FB143FD6EF140E694E70FE7F3531CDAE
+:10A340000EF3BD5B8575A8B88EE6656618EF0956F5
+:10A350004BF9492E5834C0AF73EB7A7C0AE2C96AD4
+:10A3600052EEF03A604DF8E7FA603AC905008D27E1
+:10A3700070292C21086FE652981DF245222FE1DD4D
+:10A38000C9EAEA8AFD18E15C64B735117CD7E47B41
+:10A390001AEDC1EFACF6114F683F1DD55300AEC9A1
+:10A3A000B16DE10FF3A7F98DAF1AE5FD320EC717B6
+:10A3B000F8B82792F031FE9E11F45D9994A934C249
+:10A3C000BC4615B8288D1DF09E9965135EA6D7650D
+:10A3D00005F1F475BC368BE8CBDC387022E0F6ED85
+:10A3E00081CFE46A507EC2C48AB19E113E25089F87
+:10A3F000816DE1D34A7F06387434FFD722BC6538BB
+:10A40000EE79A5611016C677710AB86BA9889F18F6
+:10A4100067EA881884FBF7302ED0FD142C023C3FED
+:10A4200096A0DD89EDA6316FBE19D61B5BA059340D
+:10A43000070D67C2F92C76F2F9E4AB0EA2CB961D9C
+:10A440008ADF06F5467B7A3F3214F215C72CCC0F13
+:10A45000E52D8CD36DCB46D5EF037A99FFE64B8380
+:10A460006087B12F049DF6DA60622E890FF8AFB7CE
+:10A470003F9CB93283F9BEDB6375F9ECBA2EBAFAA8
+:10A48000FDF6A5E9CA73037D74E5FD8FE5E9F203E6
+:10A490001BAED3D5BFE6A391BAFCB58D37E9EA0F61
+:10A4A000393549971FD67CABAE7E4D18EC9F7E08A0
+:10A4B0006E4F4326C0658EC0D3F5978B74EDCE46A4
+:10A4C0008D3986FB6ACEDAF9E3705F8D60A5BA7EBE
+:10A4D00058ADE573A4CB4AF88BF89CC7BCD101807A
+:10A4E000573E6B3E9A0CF05BE857DC08B7F91B78D7
+:10A4F0003DD96EC1BE45236330F5EBBF9732733053
+:10A500000FFD54FD71D36F8F84948F76169A90FE51
+:10A51000EA5C919D906ED835EC9A1FD476F1EB0EE3
+:10A5200020FE3E50DD36F8B4F84D95F6C1E2E71551
+:10A530003F837E3358CF68CC571C53991FF07F92CE
+:10A54000553E3C14D2BF56FB7F7BA467103EB644F9
+:10A550003D9EC35C7A3C4764EAF11CE9D6E3397A54
+:10A56000B01ECF311E3D9EE30AF4788EF7EAF1DC8F
+:10A5700079BA1ECF499A1ECFC9C57A3C77ABD4E3CE
+:10A58000B97B951E9FA9BE123DFE0CF897FC377D46
+:10A59000CD625DBD563AF0168FC3B467ED4F74FDC2
+:10A5A00096AA6556660AD2830FFE223DF462CC1D40
+:10A5B00000382F043C045C6DE9A0B87EDDAAE47F7E
+:10A5C000810E9A11FF1121F85767466BEDF06B99D8
+:10A5D0004ABC82BCFC8B0BF84878AAF61DA6D37B3C
+:10A5E0007D9D6206BEC1BC85BDBC9141BE6794A77E
+:10A5F000528EA23C320F0ACAA38EF85A1B393A4136
+:10A60000CA9F0EE4A8AB5B900F02403E665CCE335F
+:10A61000B6D684F39821E8FA5038A7CB4B58742D5E
+:10A62000D4833A83615E1FE3BC619C8FC3FB1EC170
+:10A630007D7A2BABB360FF335903A5B35833A51A0A
+:10A640007392DE50C4DC94CE615E4ADFB66BC9A95A
+:10A65000C037CBEC8D8350EFF84BE17B27149CCCBB
+:10A66000F1389C6C877095FCFA7DFC27D4F3A67AB0
+:10A67000D353213FDAEEBAF321F87408E504F2DF90
+:10A680007171345F66F6664FCA6EAF9FE524375E20
+:10A6900053340DF9AE2FC9EEDE0A6BEB9BCCEC49BF
+:10A6A00028E712FD6993003F79A97AF9D247D0C40F
+:10A6B000F35DEA16A39EC4983F16E5C3D58E3B3CD6
+:10A6C000D5732DAE5FD6BFD27AADD6BA4538CFE6B8
+:10A6D00072877B33D0E707021F4FDF620BA851411F
+:10A6E0003AFA2862D6D178C0DB5D11DA0DD8FFF4D2
+:10A6F0006937AEC2BC7228CEB518E677B110E0CD8E
+:10A70000E13F96C35FEB9E004B3CDF4DEB158DF0B8
+:10A71000F772F8C33FB2BDEDCE9FCF6794C2C77F3B
+:10A720002D429B82FD1C3235A4B8111EE68641A441
+:10A73000773AE2A99FF3560E978EE03032A2DB4CB7
+:10A740005CD71C9BCDAD429F23158ED72FE3EE988F
+:10A750005501FF9C6BF2260454DDBC8B10DF65CEE7
+:10A76000C2EE494037E72D62DEF67801775716EEE4
+:10A77000AB8EE65D83FDA31E78AFE2473D90FE40C1
+:10A78000FE655F8CFF7EC8DB4C973E988CFA4BB61B
+:10A79000C9BD198A368643D740EFEF0A783F6181F9
+:10A7A0007C2C7D5F83DF13C379FBC4874DFE1A6861
+:10A7B000EF1DF90AE1E9E9850E5A4F2173597193AA
+:10A7C000CD16FAF39F47FC7D7F23E0C397AAFD14C3
+:10A7D000D771479C29E5039A87D617F51D36F4C72C
+:10A7E000D1BFDCA7939C7C097305DC26330FEDBB3E
+:10A7F000A94CB3E0B8BFBB60F520FFFC9DE027A0EB
+:10A80000DFD3F719CC4FE96D2C40F56F678D947F3E
+:10A810002F22A75B15CC6FE223BD7A227F0D81FB2F
+:10A820003A82BB5DBBA313A797939D11EEEBE37F29
+:10A8300014FD4E14F402FBF551A417D8AF0372D3E4
+:10A8400042F6CD684E2FCCECECF9CFF64D430B978A
+:10A8500017C0181D49B0FE1B040A6FF094929C406B
+:10A860003DAB13C0BFC1A5929E5530A2C98CF3DF8A
+:10A87000F635E7636F2C63913E287F6384CA105FCF
+:10A8800013368C398DED8EB340A701503FFFB27661
+:10A89000241AD63F01F83B706456D015E444885C16
+:10A8A000BA2971DD68D4236EEAA1FF3E96D5AA08C5
+:10A8B000BF71597AB93201E58AAC07E31D4438C447
+:10A8C000B6952FF5A942BEF4617DAE46BE2C367911
+:10A8D0000E131F013A43BA2F32334F7BFBCDD54BBA
+:10A8E000917C8CF4969BC5D82DE32E592FC27AFF0C
+:10A8F0009EAABD83FD2C1EFFE759C88FE11CF5768B
+:10A900007F94A3EFA8EC7E28FFBC1A200EC2F5CBE3
+:10A910006A3BF38082F355B593F2A7AA13293D53FE
+:10A92000EDA2F45C7526955FA876533E2DCDFB070E
+:10A93000ECB768CDD766D4A3568749FCF1792C11C2
+:10A94000F4BB3A8C9FA396442EF9A810C65D420230
+:10A9500010E4755DED18044BC9BEBAA398C277D553
+:10A9600081E5EB1437CAA7B947B455483EF38F3792
+:10A970004E40B633F0C32F13106EE59715A6C1569F
+:10A98000BABFA7E72B1CFF64F5609AD7E96A0FCD21
+:10A99000CB53DF74340EDA9FAD2EA0FC9034EF3928
+:10A9A000ACE7615F5BB1FDF81D4DE66428CFF72889
+:10A9B0001EDCDFC33DCCEF07FC6DB07079B101E464
+:10A9C00005D2CF88EC494FDCC9909F6B7FC1FD3128
+:10A9D0003576767E1CD2D5E04233D69BF63DE85CD8
+:10A9E000A941FABED23E397F4021F89C3F1043F086
+:10A9F00090702A17F83ABFB7EFCD43A0DF03A04706
+:10AA0000AA30BF96CB269A5FCB47E17E54128CEDDD
+:10AA100017EF49EFCC1CB84E686CC37CDFCE0CF04E
+:10AA200010617FFA093C979D7DFEEE44C4CBD9D8D6
+:10AA3000BABF7C827CEF33CEF740E3FDEA31E48B92
+:10AA40005D13DDF743EE8205CE6974AEA98C40B983
+:10AA5000B8D0CA349ED7FA62FE6C38A3F3EBA09D3F
+:10AA6000C923713FE178AE5E41BE96A9B85815D0B2
+:10AA70007DC6CE47D27E0AF3DE5E37F793C7203D10
+:10AA8000EF37F92C20B7CEB3BA0BAF225FDEE270FE
+:10AA90006F6558DF1C8EF57F6EE1F3F26D8573BB39
+:10AAA0000BFBF3131D43B915CBCB5E7CB40BCEFF70
+:10AAB00035D44B20FFDABA08E277AF59DC27AAB0C9
+:10AAC000DD13BCBF677E71CFE7FB307DA03CEF1E7E
+:10AAD00048FBA7C5523F737EB5A00FB607B9CF920A
+:10AAE000803FFEFA6525100670CB5E7F7079128C70
+:10AAF000D76F6393A90BA4B95B941A4CFB762B38E0
+:10AB000086F2F6DA3417E1ABFF8E5415F5C93E5DD7
+:10AB1000FC9F5C4FFA805E4FC85AFFF5C82E2CA8E8
+:10AB20002FF451EACE2C037A58DDEDF779FC9C58CE
+:10AB30004BF3D8533FF9FDDB18AE0334119C77A1DA
+:10AB400095EC14B85C0BE4CFEF4EDF84F68CBD2699
+:10AB5000DF26925F455C5F39EFF53D8A74560EF54E
+:10AB60007D902FCFF5455D07E5E59FF5700345B175
+:10AB70006E4FDE5080F058B8FBA1315DA0DEF9A128
+:10AB8000CC0DA860C57B2E8DC176AC1BE8D6D8CF86
+:10AB9000EE9A845BA1DDCFB3460E44BAF2AA7534B7
+:10ABA0000EABE0E33C22E41E6B04E024081104F544
+:10ABB0007E0E9FF17B6C7DCCC16416C44F45FDB207
+:10ABC00054B4B70CD0EC6E15F74DAA2FA9D211943E
+:10ABD000A320FF6E4B837A4956D1AF73728AF72A4E
+:10ABE000E49F55C833D9DF2356E60B8BE57AB38251
+:10ABF000F2D9CAE5F656E02F557941B90DE396E250
+:10AC0000B856A12F278390CE8579263F62F3936EA5
+:10AC1000F023C737DAD1A4DE323DAE667F23DA7B7C
+:10AC200022B4BB711C69376366B70BF5A215119E80
+:10AC3000AA34D2BB9A53700D205797A6417F0B556B
+:10AC4000D0C3D243F430FB8F93AB2F447896637F0D
+:10AC50003FB6BE91EF2EF9D6C472810E963C64A326
+:10AC6000736A8DB037D408FB564DE4203BF20B7667
+:10AC7000C4547614E4ED30DE436BBF4B22F3889F5F
+:10AC8000D430D62EDC0E001FD080EF04406E68C09A
+:10AC90000F865F6E5639DD371C8E1E80FC9679223A
+:10ACA0005D680730312D449E1AFB01BC6DC6758E60
+:10ACB00060114C0B919B1E1663C5FDCB1CB1FFD2DE
+:10ACC000FA870AFCC9750C15F6BCA12D1F4520DFBB
+:10ACD0005CF26D1EF1CF8ED6B75FACEF37B83E4851
+:10ACE000937A79F7E03C877DE334E33A879927A6A6
+:10ACF000A09E03F37F0DF13CFC1B937EFEDF87EBF0
+:10AD0000F23F761D7729CC67C2FDF9B5D58FFBB32D
+:10AD10001EE81BF773FD822C3FF281BDB01FEC785B
+:10AD2000AE9964253DB75ED849EBE39D645F7ACD6B
+:10AD3000C2F3BE19A27D182339523FA30BB5EF62AF
+:10AD4000AB7C2B1BFBAF8920FE596FF1AF49C3FED3
+:10AD5000EF8D73FB005F2ACA8FFE70DE10FCBBC64E
+:10AD600012B84DC5FEBEB6321C6F7D4C20B902EA4A
+:10AD7000AF5FD085EA7F04AA14DAEF86984C774C4F
+:10AD80007460B9272916F27BFFA192DC589F0B79DA
+:10AD900007F171B207AE9FE8490AEF84698289E63C
+:10ADA000A3B24AFA9ECADB7D62E1F56E15F8FB5844
+:10ADB000E007F639F1016D428419E9D8945EF46D2B
+:10ADC0001AE1DD93A4C07C1E9BD393211FBDB5E483
+:10ADD000C654A29BDA47889F4D173890FD6103FB4C
+:10ADE00020D4A3F99F1973B786213EA71687917DBA
+:10ADF000F4A3E2E5912E683F55530336B41B4FC9C7
+:10AE0000F7849EC74DE91E1AB7BCAE77FA97217436
+:10AE10005D6403BE01FDFF225CFB9EF6EDBE5C2A75
+:10AE2000DF07CACD0FB0AF3E9FD37327D935E6C831
+:10AE300073646036E2F540B39DE1F9A4237AA8413A
+:10AE40003C40BFDD855C277A45FC4F0FE7E71C33AC
+:10AE5000D00BE46BEA7AD339E7290BF32888AF3DAE
+:10AE600036C27FC124BB87EC8FD3C337D9A0FC0E79
+:10AE7000C1CF6AA687D3F79AFD917E9342E727CA8E
+:10AE8000FB7659A85D99D5FFEC36E8A7EC406F92A8
+:10AE9000377BAD62DC57237879942775E5002CEF7A
+:10AEA0004C74F09AC5154DE56FAA8CCAC3031931CD
+:10AEB00000C7B830AD5BFA40A43BC0B303FBE5DF8D
+:10AEC0004F08FA3A01DD22FE7C9591D42F6D7DC8A2
+:10AED0006B35DD36233E352B2F673F51A9FC84D3DC
+:10AEE000933417F2272A93695ED2CE74C26B25BAC7
+:10AEF0003F51A690BEF4C72A35600DB5E34FDA7E08
+:10AF00005F06B4FBE28085EC78337F597A1CBFCFB3
+:10AF10005C5E4EF6C899254BC94F7061E9178336C0
+:10AF2000C07A1A977F9AA285D8A5679641AB90FD03
+:10AF30007C43BA67503AE06776BA762DAEAF22AB63
+:10AF4000711EEAD717AC0D4FE27921A3933614BFD7
+:10AF50005F7CE5E436AE773767A09C5868E67422DC
+:10AF6000E56D85A0C34BE9DA48AC0F709B8572256F
+:10AF700022AB81F3BFA53F8EFF9FA9DFBA57817136
+:10AF80004AC3EB1752AAFA73B09FB34A204A492723
+:10AF9000386AB8AFCE390351087FCDC4F5BCD2EDC5
+:10AFA000FA75E11F7302DACD18D9C14BEB544F1873
+:10AFB000EE03E6B7E2FC4B9935583F35882FE8871A
+:10AFC000F0C51C7F9CF553C043C9B3BDF3F07C5161
+:10AFD0001AB3EF1743A81EB493FB456D9B97EB691B
+:10AFE0003B1FBEBE73621F9C832F16A4971D36792C
+:10AFF000CEA7F12FBCD299C64F10FBE48222E8F510
+:10B00000D9304E576E5817CEF3054E570F4B3EF9B9
+:10B010002CEFA734CE6742BE545AED24BA927C0975
+:10B02000E642FBEBECCE646A27F918F33246F5777B
+:10B03000266DE6FA9B38EFE284A17EC9AFF9389815
+:10B04000477E7EE6B964392EE9DB46796C5CF7EA27
+:10B05000746E9F0239DDF99F9D173313673F31A747
+:10B060007FC87A22AD822FB8132766A37FC1AAEBCF
+:10B07000F742A4F50E8F03FD0CFAEFB2BF07D3F928
+:10B0800079B2BB01CF5DD4E68336DC874F33921BA8
+:10B09000C6793C26DA3DF75C2B5E55614F672E4939
+:10B0A0004F2EAECF13FE3EB64AFCDD990CFCB81411
+:10B0B00061951684E3DE5C2D19E5C605E11FDA1BF8
+:10B0C00003F92CD4A7385E645EE2C34897CB3F9E59
+:10B0D000978CFEA837D2B99FCD08EF6500572CAFEB
+:10B0E000B1C0F9260BCFB9C71EFCB267703D5F55E2
+:10B0F0007B3C7342F2F336E4DA713FCEDF986B2F7C
+:10B100000AC147CDF6FEC75C00F773DBCD6E64EF76
+:10B110003566FF2F504FAFD9AED6211D41B91DE185
+:10B120007DCE71E81DAC376F634C1EEAE1B2FDFCC9
+:10B130000DF99E392178E8BB5D8F97EC3A7DBEDF33
+:10B140003E7DFE3DD441E3AFBE5D6E409FEF7F4C40
+:10B150009F67CD80BD41A80F70BCBD3CD87DCC059C
+:10B1600078EBEE57DDF8A9BB63D2E4F1A8476C5445
+:10B17000DD3DA1BCFB52EF58D42B4E6D9CEB46B489
+:10B1800017ABBE853F059C167F3AE618CAD5B3AC0F
+:10B19000EEF7E3012FF3EAD759CD2E5CB79EDEF729
+:10B1A0009A04FD3EC7ED770BFCFAF2B67C6199B4C8
+:10B1B0007B6486D297910E60DC5B3C30A1B2AAF72B
+:10B1C0001F44BE503C0E081FE8ECDABA7556D4FF97
+:10B1D000AE3C8E8FEB970E8F0BE1513898975D57F1
+:10B1E000358A7D01FB8EAD7D6F0CCEBBF0E70AE9A1
+:10B1F0001F852FF53A82F4D5B46BC64D94DE5240CC
+:10B20000EB9776C2F9F54A2012F2CEC1AE7D8DD011
+:10B210006EAE9FDB3B8A56D882FC90A19FCC308FCC
+:10B22000F521E530FFF9FB0E7EA740FFC51BF5EDCC
+:10B2300016009F46F953B2E5075BE877791EBDAE6D
+:10B240007E938AEB9E2BE62FE527F30D273FC575EE
+:10B25000BC09FB12FF0FE44E698216DF233E28472C
+:10B26000AF5BCFDB03DB2DC475973BAC2E5C77B9AE
+:10B270009D0522603EC722AD1E277CBFB42192EC03
+:10B2800074F36CA0AFE651CA308E011831F9CBBE11
+:10B290007A5725BDA73C8EE3BDFC2985CE69E568BC
+:10B2A0005CC5FCD33CBF8005683D482F9ED075FA35
+:10B2B000F57956CBCF7765E6C041844B096BE4E75F
+:10B2C00033C0A727C4DF5D06EBFC2816F537437BA8
+:10B2D000E6D6C88FE7E0FA58C5BE1F6CA1E5F29C20
+:10B2E00029CFC1D27EFC5486371CC7B108BD79FD79
+:10B2F0007D9E0C9CEF4A8B2703E1E05B1746E7FD40
+:10B300005B3771F9B53E06F4D84EA43F933E7EAB51
+:10B31000C2F5733683F3C321A61703286F9A1F8AD9
+:10B32000716F76517D9263EB1FE8CDF5FF7FA8A486
+:10B330000F35AFE37111EB7339FCD63F90CDF57F3C
+:10B3400029F7E219F5D756DFF664A01D823DC8E75C
+:10B35000F5092E2944BF8EE8AC4D467CCBF549BD9E
+:10B360009C15FF387FC65611A7D1BC2ECC8FFE8C02
+:10B370002F15EF5153887E3BA707971383467AB664
+:10B38000897AE4F798639A78FFF530AF390F9B5CC0
+:10B39000687F6B85B7C79381F2F3CB756179486796
+:10B3A0008346727BD4895CCEF72306308F1FD2721E
+:10B3B000D16F790F932E4D0C07FA837EBECCE7F642
+:10B3C000F0C8015EB2036E7571BE6F5CC73DA29F8F
+:10B3D0003956EF6F87B5331F0917369AEB1D5F2E6D
+:10B3E0005236F37901BE213FE85761643FFC52C8F1
+:10B3F00025095FA01B8A7B907C2BA6955EFCCF86DF
+:10B4000001BDACB3703A90E7B6107A11F8EF46F888
+:10B41000BD55E0973D1026E8C5C4FE8670CC777216
+:10B420007AB8CAF317E07B5D8F816DCF6112DFCCF4
+:10B43000EC1FF8CFFC2EE52F3FBFD7077A46C90B8C
+:10B440000F4531A877DA5C9BE086F6655B57467955
+:10B45000203D65F6453961FCD37EB5C0DF0EBCDF0B
+:10B460004578F3739C4309F1939E79EEE713709D41
+:10B470007FD96A71224BA8D86EA3F3D8C2DD0B48DE
+:10B480005F877C13CFAFFE1AFDA615FBF4F6F99289
+:10B49000671E4A7011BC7DC9A6444C03C90CD285F5
+:10B4A0005B2CAD7E641806F4EFE655383F637B9C59
+:10B4B000C765C077459D5A688D6E5B5E21F84BC5A8
+:10B4C000EE9F7F8D76C38ADD379E447E5F61F00BF1
+:10B4D000140BFF88D12FF09B1E7ABF33C087E20C7C
+:10B4E0007C30AF9E442EDCAE5CF3EC23394DA83F9C
+:10B4F0006C792B4AC90AFA07A4DFA4A56EF653AFEC
+:10B50000BA3ADE9717847D388837CEBF5CFB140CBF
+:10B510005682833F4FCB2C81A82178DEDB6421FD4E
+:10B52000B7ECF9A7B73D8674F6B18DE47BE9F3AFCC
+:10B53000FFFE3AD49F77593A8DE3CB7028217139B9
+:10B54000152E6E8F93F82979E975AB2B9B7F5F1AC7
+:10B550001BC453E9AE83568C0F32C27354DD416B6A
+:10B56000A3A31D7CD5358D213BD4B37FB5E2FE3836
+:10B570007D40619D53DBB62FDEF47A14EA6708271D
+:10B58000944F126FAD7834D487FE27BC3A80EA39E5
+:10B59000F19C72253C3ED58371BEF272248B817979
+:10B5A000147F62F38F43FCEE5C1285EB3969AEE4E5
+:10B5B00074FFC4CA04D4F78A2DBE0427A5FC7BF10E
+:10B5C0009377113DCE572A139C5944EF4926D22533
+:10B5D0007C49B8CEB91BA7D23AE7318DE8B1F8095A
+:10B5E000D5EB87F45B332BD8D5CEBE19DB93F3A90B
+:10B5F000939B01B9B0CE93223ECBF73B559CA3174A
+:10B60000913CBF4BAC99B1C594FF56E873DD7AB657
+:10B61000FABFEDA1E7D08A2DAB1B104F67BA793A7C
+:10B62000E33C010E3E0137E507E8577D2FBF33C7E6
+:10B63000137361FC02B503B93A0ABF63FD068B07B9
+:10B64000EDEC21EDC439918F7FA7181FE61D8EE721
+:10B65000E09309EDC77FFDA4A7E40BAC2134FEAB5A
+:10B66000433EB0E53EA2AF6F3EE07C66A17F620143
+:10B67000953758029DB1DC7F708A427CC2C602EDCC
+:10B68000EDF32D16B1CFF5E5304FB3120ADF035CB1
+:10B690003F95F4320FF4B240889E10A41F6BF03B2C
+:10B6A000ADFF57623D8DE4CF937EC0F9823F18D73E
+:10B6B0006FE417F93D0D714AA23DDBD8BEFF29C8E2
+:10B6C000277C346E19C877D447CA3EB6911E51F60E
+:10B6D000BCC58B703ABBE3F0EF6FC5F36D9DDCD753
+:10B6E0007A3E6CDCD7C52F0E6C775F9F5D9BDBFECF
+:10B6F000BE86EFEDEEEBB50AF1BBFF2E1F06C94784
+:10B7000076892BEDDFF91DF0E14A035CBF6559D165
+:10B7100043B0D059D89DF06480AF84AB91AF5A91BB
+:10B7200049B6C35719867484C053C251D22B631AC9
+:10B730008DD34AD7926E255DB7D2AD71DD7A781A76
+:10B74000CBF310F7301FEF2B16D217CAEA797C2201
+:10B75000B4A378BA0AB4CF53EDDAA3C99D42F37EFD
+:10B7600043BECE50DF63C87B0DF53543BE5257BF95
+:10B770006CDF612B3F3F0474F56C5563E93CD25696
+:10B78000CFF073BFD3EEAFAD3EA48FAECD56E493F2
+:10B7900096E5CC1709ED9BF7ABA4F75C743547A190
+:10B7A000DEB2328CEB75179D221FC3F3CDF1D65557
+:10B7B000C827E5F7E6306E87B9E86D8E8A0939CF7C
+:10B7C00037D5AB5168FF6DF4B382F6E35B6A683F2F
+:10B7D00035B28ECAB97E77319CDB1B2E86737B43D4
+:10B7E000BEEA48A9423B6C2D8F239CB36C5A14C50A
+:10B7F00061D4A7DF3C1DBECF7D93C20C308ECE8CB2
+:10B80000F10FB3392AD929E6A378C2D9F53C0E62E3
+:10B81000CE5A3D9EE739B650BCDCB76C29A5F3D6AD
+:10B82000EBE3174AD85AA2B3E28D86EFF563699F1E
+:10B830009418F68926ECC3C67DF2A1DC27B92C57F3
+:10B84000172729F879BE9A75F374C0C7C5632AB360
+:10B8500041BEA55E65AB06F0B858F43FE18104F740
+:10B86000DF42D8AFA83749789DC37DD4AB63FDE5EF
+:10B87000DC9ECF06FD14E966EFA7398F437A6EEFA1
+:10B88000C719AF61FEE53FA47CCADAD61F75E0BBDD
+:10B8900059C8A72F1EB031A4F78B07DE48417BE4BF
+:10B8A000C5576D74CEBEB8DCC6EDDC0722FD28623C
+:10B8B0002E76E37A71CDFEBFE634925C5EC1E5621E
+:10B8C0008695F0DC52FFF713684F6FA9875521DF8B
+:10B8D0003F1041FBA9E2D530B2335FDCFFD741A175
+:10B8E000F6B9FFEE7AA4FFFD62249BFE22D2710C12
+:10B8F0003F1754BC76EDD3E85F2EDF7DD03A1BCAEC
+:10B9000047FDE63F7390AF5E7C91EB53172C8D4F54
+:10B91000A28D3322E3D2AF2C4968E783CEBA30B68A
+:10B9200025A3FF645F567B70E170B80870C0750195
+:10B930005C8A511E74048FB47F5B787C3D8BF3B7B7
+:10B940006B18FAA38370513CFC7BA4DFAED0FAF9EC
+:10B95000F7037FCD41FE73A5F57A70BD03FFFFAC01
+:10B9600077D6BFED7A39BD7F85F235BE2DDDB7A51F
+:10B97000EB97FF83F23B23DD34DF1FB9DF7FF6FF58
+:10B980008CBE37FEDBAEF74AF87E53E03BD289FE31
+:10B99000CC8BFBFF33855DC5BA5FFB3FBA6EA9C791
+:10B9A0008F54DDC772A1FE5BACEE03772A6923EDED
+:10B9B000EA21A7321479BEA3F3D328C6E5F4287B85
+:10B9C00029E99FA3BA3E40FA720DCB23FF85AFABA6
+:10B9D0004A7E1D0A020138BC91984BF7AC9839D0C9
+:10B9E0007509E447269753BC98F15C392A7C7C01A1
+:10B9F000EAA78797C1BCA09FC3912627FAA84777DB
+:10BA00005503B61C4A9B303D9A3296E2FE473BF402
+:10BA1000E7ABB18673D28D2E7D79017BB113FAED40
+:10BA20000AB22C74BF620CD60F39571ECD70D23AB1
+:10BA30006F64B52B9C8EAB8753622F7ECE6C0B87C9
+:10BA40007F0EB7367012E768B3A86F849BD9717FF9
+:10BA500003B633333817F3F5D2795A9E8BAF044FC0
+:10BA600026CEDB6631B484AFB92BF7CF86F44B70AA
+:10BA70009170BF5A784B3C19E12EE12BE166C4C3AB
+:10BA8000D90C26CEB71CFE5DCDB966DC77C3845ECB
+:10BA90003FDA1CC3F35D1B542FED473FE16DD437F4
+:10BAA0006E33EAF5231C3114476ABCBF5034386644
+:10BAB0009002EB4D36339F0DCEA1E87B23BBEB7D8F
+:10BAC00066FFF2541C87DB77BB99B9FD1A76B72F56
+:10BAD0003C8FEA7BAC902F7C703EF340FDC264E665
+:10BAE00056787D161D4BE1714CC5383148B15D610A
+:10BAF00034EFB7B033F32FE7F824BCA0D907ED1B20
+:10BB0000D0AFC714CBDB47E5517B9F89B7F79821AE
+:10BB1000ED9ECEE3149A5772BB7CE1EA6E19C83FE2
+:10BB2000C68DD4DB996B7B717FA44CBFEFC5F7BB8F
+:10BB30006A7227D27D8A15BDE97CA4867BCBF7A0EB
+:10BB40009D7E278FD3295C75FBF88138BF9D716E70
+:10BB50009CDE9909BB06F1FA33EEFA10BE6BDBC32B
+:10BB6000E8BB2B531BDB0BE30114D7AC3DF0A16802
+:10BB7000EA616B220CA1D54D3C8F76C209BE5DEF08
+:10BB8000A07F72C21495EA4F603C0E93AD88A03836
+:10BB9000CCF1BEAFCD89D0DF78387460795398335B
+:10BBA0006511CCBF50D887A7897863359C692F3A37
+:10BBB000705EDD32D2E0FB78D67E7CF243627FA9F4
+:10BBC00023958DE867EA3E8ADBEF657DEC07FB7D18
+:10BBD000BC17B747158954E601AE547FCE1A5B53A4
+:10BBE0003A9E7FD65802BD20FDB0F7C879BDA07C33
+:10BBF0005C1A1BB301E17E8FCA36D37C9B0BC9AFA5
+:10BC00001099E9423C6840D2E45FA94D75A15DAC52
+:10BC100069445D00FD094D8FA6BA6B5C84658A0797
+:10BC200092E7ADA611811E68C76FCEE57E8913CE5F
+:10BC3000C6483C2FCE76D8F9FD4911573457DCA3BE
+:10BC4000E95ED3F8C035780E7D48257FCDDC87F8D6
+:10BC5000FDB03F3BEC7E05CF6DEBF93E656BF571BA
+:10BC600044CCE9263BD0ECDA11563C6FCE7178AC6F
+:10BC7000B84E7FA6B602D725EF23F641244097851C
+:10BC8000B58514AFA246C1BEC37D627645E139D801
+:10BC900018875421E28E64FE17E1DA03D85F51B4AD
+:10BCA0006B27D2CBE755E9641F3D2EE86E1CC655C5
+:10BCB000A23FC3DC9884F3198EDF11AEB1CE0C071E
+:10BCC000D17318433834599C1948DF4D2BC34CE8C5
+:10BCD000971BB79CD335EC33BB19DADF6766E1E815
+:10BCE00067B84DB49FB9CCECDD04F9AE76668E8CA6
+:10BCF00045BACA25BA4EECA315E17C4EDDCB06232E
+:10BD00003DCC5EBB8EFC31922E98B961741C8C7355
+:10BD10006A6B6A1EF2CD563EDD67E4965EA1F43092
+:10BD200045213A80F4603AD1C3A46791EEC78D0CE7
+:10BD3000F4589C85E7D132E641F99EC8DCA827B4C7
+:10BD4000B066F257B638AC2EB47F497E22F986BC75
+:10BD50002F2BE9601BC87BB385B1EDD5764A9FAB2D
+:10BD60007632734FC6765427527E67B58BD2BAEAC5
+:10BD70004CFAFE62B59BF2BBAB07537E6FB587F200
+:10BD8000FBAA0B287DB5DA4BDF255F02B8101F92A6
+:10BD90007C45F2A3D90E6B13FA2F255F32D2CD2C3E
+:10BDA00000EFF03C6A4F7C4FF23B5C87292FC88F35
+:10BDB000247ED314AF2F3115F958E30CC47FBE7A1B
+:10BDC000EEF997F15C5EEC70D3399D71BED702F449
+:10BDD0008A7049B1B27D6897AD59E4695A9D1A8459
+:10BDE000FF6DC50A3387D0D5ED9561CC1C2237EEA7
+:10BDF000A88AD1E56756BDFF7A67DC0FF1DA67885C
+:10BE000097133FFBEA893FC0F7A77E76A627E21B80
+:10BE1000E6B1F5111C776978EB3C6231BFC2427E16
+:10BE2000AEEEC27ED25DD84FF04FE87DE6A77EF63B
+:10BE300037DAE74D553617EAC59F20BE00BE7F149E
+:10BE4000F82AAAB2111C0B577EF1FCCBB8DF975A27
+:10BE500089DF15AD10FBD1700FFAF324467609D0B7
+:10BE6000AA299EFDF37BAD8108E8FF7385EF63058A
+:10BE7000948399187FB8E68D8F900F2855C7C8FF17
+:10BE8000AEE1BD3D9C9FCF724E77AFBAEA28D56335
+:10BE90008D5D63D0CF23EF25470CF0585DB07EA4B5
+:10BEA0006DC45F51E62196847E965AC589AADF1C2F
+:10BEB000F17DCE1A85FC9A18C73305EF9167AAB4B5
+:10BEC000AF46F432135E9FC2187CD2EF6A494E49E6
+:10BED000BA9DB316DAE1FEA8CDB5CE0BE1C745E2B7
+:10BEE000FBEC4C13A5F27B02F60BFD7559933B1D41
+:10BEF000F58A2E589E8569DE74846F17C718B312B1
+:10BF00004207CE4CB398071FFF29442EFCEFFECC0E
+:10BF100034EBDC2CBA0F48724C8E539499B70AE379
+:10BF20004B8BD68E402ECC6A2CEEC44E502FA9B52A
+:10BF30001F711FDBCEE3A8CB3A9023D2AE760AFF67
+:10BF4000792DAD9BECBE253B7FBD13EF17947C6A2A
+:10BF500023FC96F413715B59FE4193C900A9B7679E
+:10BF60008FFEF56751E4A7D8CDE33B21E576D6A552
+:10BF7000C5DC2EEB86FDD58EBFE8C8CE4FA3DAB563
+:10BF800063EF567F941DBB42F93E0AF508B99EFC4B
+:10BF9000FDDF26D03C94CBE427AAD8BF32A1BD3820
+:10BFA0002FA31DBBD5DE2DEC7A154B0BDAB5771B15
+:10BFB000ED77E3330DFE0333A37B66D27EC7D4ACAB
+:10BFC00068F4037C2BEE9F7474CE91F6EF8A0DD04B
+:10BFD000491CEC57B32B1AFD5B173BD0AF1FCAE4CB
+:10BFE000F2FFBCB0975FDCA1D2B9E7E28E48DA5726
+:10BFF0000B773C7814FD8E0BB728348D72D640F049
+:10C0000003B8327BA85CC338B6B8B6F36EF1F78CD0
+:10C0100046B952FAEBC84AA4B705758A672BCCA774
+:10C02000C5EE8A8E0F99CFA24CBE6F4A6D758308FC
+:10C03000DE62FEF3335D4457B2DE82FA07C9BE0CFE
+:10C04000F52E905EF44204E3F7539ADFC1799EDD4A
+:10C05000D8DF8DFEC20575BB16925EB123C289760C
+:10C060008533226E59F673AF18EFDE4CAEE79D159F
+:10C07000FEA3B33BF93B00384FDC6767146E87962D
+:10C08000ED6AC4BEA8C9E47A5606C2203E587F4174
+:10C090005D53540FA87F72DFFB943E20C659E068C1
+:10C0A000C841797C727704F9BF4EEE7E7CCC6B3050
+:10C0B000DEF9BA119D705FC8FE1FCFB4707C6C545E
+:10C0C0000B105ECCCFE366CA11BEFD43E719B7C9BA
+:10C0D000971ABAFF78FCD0D9DD2F4599B282F82C97
+:10C0E000B757DA934CB88F167991BEA39178A07F99
+:10C0F000EBEE893E946115F5B90CE99AF65F12D51D
+:10C100005F630AA967B3B829CED4B2AFD0C3EF99A1
+:10C11000887B51228E3F5FCD22BFE2AC7EAE69B7F5
+:10C12000219F7CCB42F858DCDB350DF9D3A5069571
+:10C13000E13C17A7B200EA274BEE89DC84724CCEB3
+:10C140007B567FCE0FCAD628CC03EB2BF3AB4C83A8
+:10C15000B40BE0DF87F494D83810E3249B52B95E27
+:10C1600021E3471F2B3679AC20075FCF8C157C5617
+:10C170007B742EFACF2665D279EE8495F954B42BD0
+:10C18000BDC8E34BCBD2785CF363221EBE2C369045
+:10C190001107FD9D13F82D9B14C8C0B88BB21793DF
+:10C1A00028EEE29C95FB3DF13BFA59CBF2A0BD8312
+:10C1B000DED9D064FB98107A2A2B72BBB09E1AEBA2
+:10C1C00076E53A70BECE0BA4E7EE8964A8E79A5EE6
+:10C1D0008EE47153CF846DB685E0EDE34CAE47CB72
+:10C1E000F73BD8AD3CCEE8610B8F4B7D786B92DF8F
+:10C1F0001F02AF872DDA0C8403AE03F5FB05D6DAF8
+:10C200000CD47FE57C1744D5D23CCF097A5F105E11
+:10C21000CBE3B9C57D60AC8FF9261187DEFCAC8D10
+:10C22000E280CE2435ECC5F1CF3CDB9BE1FA9B529A
+:10C23000FDF3F65139E89780CF92E76C015CCFE9C6
+:10C2400067B93DFAB485EB6BA72726BA10BF0593F3
+:10C2500036CC227BCD169B8276BED30AB32662F9FA
+:10C26000D6788A3F2FA9AEA2F8ED12601B787F081E
+:10C27000D202BC07747A6B6F8A373B8DEF3628F495
+:10C280007D0D7ED758EDAC9F203CB6F3F3D599E7F2
+:10C29000FEDE3B34DE5BA6255BF4F175924E64F95D
+:10C2A000DF047FFB9BD8E7FFC8E4F688F288BA87F3
+:10C2B000D3689D1CEE8027FE8E0D6B8C7C7C00C6A7
+:10C2C00053F454908F3CC602198FA3DD613B3F7F2E
+:10C2D0009DD961A1B8F59297233D14C7B6FA1A13F8
+:10C2E000C553A85C4F2F3101F820557EB69DE2CB97
+:10C2F0003A3D17966723FD9CD139B779AB2AC661C1
+:10C300000CEF539EDEC6E38EC7A12E49E5D9547EBD
+:10C310005AE44FEFCD26BD0FFAF7E0FDAA929FFC3D
+:10C3200094C37172F171AE77D989DF96B5FA7986C7
+:10C3300046A31C2C5F3D241AEF2BB27755867A8BCF
+:10C34000114E97CCEECEC867C7F7E6FCAC74EF137E
+:10C35000E49F2A15F7084A9F53B81F1AF621DEE713
+:10C360002C5D35E411A2CF772CAC27ACE75CDD83E4
+:10C3700051A1F8B8A637E773ADF5AD6EAA5F0AF51F
+:10C38000B19FD2556F45D17CB659285EC588C71F6D
+:10C39000DDFE39F547B56FA58F3A6E6769B37ED676
+:10C3A000F01F9F42FFDFEC0873FBE86B1DDD833B52
+:10C3B0006BA99B87EB3FFB7C18F1ADB3319C3F9C95
+:10C3C000047EEAEB85F318FB4B8AEFFADD64BABF13
+:10C3D00037DFAFEF578E3BB437E7E3E571EE688C9C
+:10C3E000172C7F97F341C0CBCDD4FE5D0BB537AE94
+:10C3F0002359B46BDD9FCF47103D9CEDC2F172769F
+:10C40000672F924F4D319CCE61BE2978DFEFECF360
+:10C41000BD72E91E1D2A3D400F25E2FC7B36A62E8B
+:10C42000C51952DE6411E7B800D444BAC136C0DF82
+:10C430004BAAB8BE556A5F4BF12518AF3B288FD287
+:10C44000802DB66DDC2DD02B9D2F1FEC2DEC983858
+:10C450005E828813273DA8CE8A7C5B13FA62D90ED0
+:10C4600063DC2E2F5F2CDBC36C3BC93861A4439F78
+:10C4700042712AA52B162DA0F8FBCA75B7E13E9391
+:10C48000F32F35B3023CA735292ACDA3298CDD3102
+:10C4900009F5CAD07142F4B97B83E3306702E9B190
+:10C4A000A4F42FEBEDA2EF98AFC57BAD2B94B53480
+:10C4B0004EAA3CEFF27549380138AC1827D83442FF
+:10C4C0009477B06E394FE3BA5BF5AEDE9CEF37A5DB
+:10C4D000BA7E3914F1FCB64AF77F2F7DDF3F3AB6BA
+:10C4E0001D3D2D28E7ADC1785998FFE6DE8CFA99FD
+:10C4F000D79BF3B5528CC78579666CD4C78B676EB2
+:10C50000D1E7FBECD0E7B376EBF339F5FABCFB8867
+:10C510003E7FBF1817CFE178DF18CFE198E239DC12
+:10C5200065E3E770CCE3391C533C87E3773C8763D2
+:10C530001ECFE198C77338E625BCF13C8E793C8F5D
+:10C5400063F9FBBD39DF2E13F1968807A477F64A0D
+:10C5500098EE3ED2C5FDFC7E09D001DF3733ACB486
+:10C560006F1EC31A741EE176A72E93ED2E8C1F5EEC
+:10C570001BA7EDEF1D8FF7501A562521DECC8D1429
+:10C58000C75AF12A8F632DCB0B73A0FDA371E5C9A8
+:10C5900055181EAAC56987B0FE454BF336846F79DE
+:10C5A000D561BAAFDFB8CCF5EEF51C7F648761C505
+:10C5B000B1A44715A29C8BED188FC67872B6561F92
+:10C5C0003F6E8C2737C6911BE940EA7F4F599A93FB
+:10C5D00090AF7FF1AC7D2DCEFF8B30711F66BADD41
+:10C5E000100FE0207EB2F8016533CAEB2F7A733D5D
+:10C5F000AAE518E8EBEDC85999CEBEDC9FF4F2D657
+:10C60000FC5AC544F1E99A87E4D01231A714A5B9C0
+:10C610006935F2B90526929B97405F237DF003951B
+:10C62000F4077C572B743DF8AE56287DE1BB5AFACF
+:10C63000FB125D74F5F15D2DFD7D893EFAF8FC2954
+:10C64000CB0EE2B97FF2DAFEBA7A73BC430C7014F7
+:10C65000F316FAEC1C901F1ED42F976E4841FC2E47
+:10C6600059D0D2B41AF0BB644F981BCB8BF1FF802A
+:10C670002F16439F78EFB278B7B8BF5CA597C3B3C6
+:10C68000851C2A36339F33364887C54EE68981F6A6
+:10C690000BFA34E4E0FB590BDE7C7F90330DCF19AD
+:10C6A000233A233F4AB17828AEB66C57CF9865D06D
+:10C6B000EF373DB4D83E80972F6B0FFF6226CAC379
+:10C6C0005DFCFCF7C5DA97A228BE4CD05B8AC51981
+:10C6D0008E78DF54CBE3EBD07EA6C606E962536DBD
+:10C6E0005C780F4770BD413AF89EF004F8E1769E01
+:10C6F000E243E41769A913EB1DA1F850CF96EB9321
+:10C70000EF6EB115BC9F3B45FE4B71DE90EB3CD705
+:10C71000FB608E0BEF7554EF4B51919F9B766CC372
+:10C7200073C83F6C5A769F788C07EDF9077C87AD0C
+:10C73000E443BE9E3FAF1F15752DEA9FCF5BDCE340
+:10C7400020BFBAF6692B9E2B4ACC7E2BC5673EBB19
+:10C75000C98AF1CA376CDF44DFE76D2FA478CCF9C2
+:10C76000AC92CEA3A7E43B09021EC523958D4E983B
+:10C77000F7837D389F2D0EE7FE3DD08F5EC7774A49
+:10C780002E6D577231CE678A7797B510BE8FE9C389
+:10C79000F98C719FB41C9F9C1F4FF0E0F7403E64E2
+:10C7A00070BA4F6FBB2F265F4EA57D31E5725F3AA1
+:10C7B000A74D0DF4E6E7E12CC379F8B8CAED79F599
+:10C7C0007C1F145B039D26E33E3960213DB7DCCC22
+:10C7D000DF792A877F5F07A977A8AAA3D78AD11113
+:10C7E0003A7A9ECE6275F7696EC1A09290FC947100
+:10C7F000E9BAFAD3A6F435D07F5EB09CF8C875BA12
+:10C800007B7FE54B7D2E85F4CC91FAEF8CC71732F8
+:10C810007693AE7D399B14AC87F4BD45E1E79EDD90
+:10C82000319BD10E586CE2E7A7E91AFFBE701FFFDB
+:10C83000CEA633DD3EEC9EEEFE03978B16F21B4830
+:10C840007BFB74FC773BF0672CBCF51E3BDEE347BB
+:10C85000FB84EE7EB7F017E2BC110FE5C29E549E3A
+:10C86000C9ED49E5BE062BBE9300F037C7C5523D62
+:10C870007B1CC655D62A646FC47429C559EAE3B433
+:10C88000B03F8C7F5C784C2DC47D622C2FC6778A9C
+:10C8900010BFAFF2B8D48568178A6AFB3EDA42B49B
+:10C8A00013A17DCBF01EDA877D5CC26FE75FD505F3
+:10C8B000E1384EC9A57B9B3B0E5A313E6FCA949816
+:10C8C0005CDC3F463A93FC1DF635C515B61C3F4C63
+:10C8D00074D6526C263ABE123C167AB89DD5487F63
+:10C8E000F3588315EFA7CCDBADB8F15C8AF5102EB9
+:10C8F0005D902E0D70898B6D0B0F09A756B819CA64
+:10C90000E7330EAFF9FB143FF2C7367012F033CEA7
+:10C91000BF23F8C975CDD3B431C827E4FAE6E33AAA
+:10C92000701C58078E23FD166CB071BFA693FD6A6C
+:10C93000A197C7D91AE963D2656E97B9E5B299D2C2
+:10C9400029E3F4FB13DBE13E997A3981CAAF967E85
+:10C9500016C23C512E5C2DDDC8F5487E1CDC27FC40
+:10C960005EC295DE3932DA279BFA88FB1003D94084
+:10C970005D7CB3E0B7C6F6C6F866A91F18E54E6140
+:10C98000A489E22D5B1C69A47748FEAB09B9A2AD6E
+:10C99000FC96EA69508FCFC6A393439AB0132E8EAC
+:10C9A0004CA377245296C52520BE0AC39C14D75F9A
+:10C9B000B84CA538EA42A8E70AD15B56AD484F41CA
+:10C9C00039F2F97DBD9EF4813EFFF93D9D1206C30B
+:10C9D000385FACB474B2BB82F53E5F999F82F11DA3
+:10C9E0005FACB34DF7B703AF88BEE23ED3CF3E2274
+:10C9F0003977DE743C6A3AB42F5BB9270AAF0F94DB
+:10CA0000AEE4F2FDE11E5A78DF8128E7376D73222C
+:10CA1000FC9C9B72D04E9C8436DFF8A05E51B232F3
+:10CA2000BF33EA1D65FF38FCA413EF852FB324A0A4
+:10CA30005E7AFA0390930AC939D2274E854117E4EA
+:10CA4000878BA4F7CF4E29CC83FEA873A6837F598A
+:10CA50008DE7C5DCBA8C8082CE532DA92FDA5557CD
+:10CA60003E4DFA4CC9FDCB32F01D426D59CFE8F670
+:10CA7000EC2932DD26E439EAF598A25E8FF135A87B
+:10CA8000D7631EF57A4C51AFC7EF151BF47A619A44
+:10CA9000F06F49BB73F79AE65CF4FBF946B2CC4AF7
+:10CAA00092C30E7A17788912EE46FEB4047528CC2C
+:10CAB0007F16417607F6C18D3A3CCB7783E5BBC044
+:10CAC000C39A41570BD927D75FB6B3D07BBA235847
+:10CAD0008C2E3FCA9EA4AB9FEF4CD595DF90D85BC0
+:10CAE000577EA32B57971F9B79ADAEFE78F7085D55
+:10CAF000FEE6C137EAEA4FF44CD4E52717CCD0D58F
+:10CB00009FEA2DD4954F9BBE40573E435BA4CBDF9D
+:10CB1000567C8FAEFEED95CB74E5F29DE47A3C8FAA
+:10CB2000D9F0FD173BA5F2BDE4BB5546EFB10D1D95
+:10CB300065E276461B97474BDEEEE908A583D97D73
+:10CB4000B91E7430CB330BE955BE8729DFB95CD4ED
+:10CB500097E3359905147E1E6E48423A36D63396D1
+:10CB60000F8D3874C905B8FCA4EFDB53CDC02F86F8
+:10CB70005E73A87F3AE4D3B2E26EA1FC90432FA586
+:10CB800039F15C3AE31633F0ABA1FD0E5DC2F2DD84
+:10CB900059893C3F99916A3268C7BEA9182F3BF466
+:10CBA000FAB4B56E6E4769F7BEBB4C111E784F1CC8
+:10CBB000E1816900E818D34340C7981E013A9E639B
+:10CBC00061EC28D031A6C7E07C8ADF7F0BE7534CAD
+:10CBD0008FC3F914D377E05C8A69039C4B31FD5D08
+:10CBE000F5744A3FA8D6A8DDEFAB8B29FDA8BA9211
+:10CBF000BE7F525D45E91FAB7DF4FD81BE8A90E3A7
+:10CC000001DD7BA31DBD2B2AFD9CD2AF5953C91A50
+:10CC100023906F349A63BEB207FD951DDB09CCECFF
+:10CC2000AB107D2D5BF16CE84BE37775121F17DFBE
+:10CC30005DA9DA1388E70F5327F7ECAFA21CAB7C92
+:10CC40001D436D3E34B5FF7EE422411FEBB33C9B98
+:10CC5000B1DD303BBF9F3CCCCEEF1F0F3337D4202C
+:10CC60007DD57CC75C18FF733092BFFB51739FD991
+:10CC70008F7650E532DFE7C33B31CAD77CD748F720
+:10CC8000958739DD8928AF64BED5EF8F7F42E27C7E
+:10CC9000A41F5EC6F78CBEDC300AF585E10EAB0B37
+:10CCA000F94868DC00FADB0F467E25E7C3703CE9F3
+:10CCB000DFDFF21D0B9872827EFC61F68654B41B96
+:10CCC0000CBFD3EE0E8D5B92FE7AE572A38A765589
+:10CCD000199F24C791F38D34437F79C1F8A361CEA6
+:10CCE000BA5CF477D4943BA8BFCEF0DD9A47F53C0C
+:10CCF0002AB5ABCB45BBDCF03207C5C1CA3881CE03
+:10CD000062DD508FD639FAB2467112C3459C04F6E3
+:10CD100063E7E53EEC6778A74012C6810DAFE4EF0C
+:10CD2000903DA1F0F7E865DC02D68F08D9B7384FFF
+:10CD3000ECB7C7DF60BEA847793C04DFC9F25CE707
+:10CD40001279E977B48F24FBD628C16B1E4ED5BE6D
+:10CD5000403AF2DA9C9F45D0FE4EEF8676D3894268
+:10CD6000AFFF27F4720ADBFDF7E9C5C3F1DD95914A
+:10CD7000BDCD4837122F12CF1DD191C47B489C19CD
+:10CD8000E1B9356E4CF463A4AF8EE84AD2D3303BA0
+:10CD9000C73BE215E3D4241D2997F9BB6EC3CBEC46
+:10CDA00024EF241D19E9A02D1D71BAACB9CB4EFD9D
+:10CDB000B5A5A320FE111EFF3A1D35AAE8BFBA5A39
+:10CDC000FAB9A3998D8986A26969DA22C46FE165EF
+:10CDD000D751CCCF6623C62049C9720DCB07B62DDB
+:10CDE000D7BE69B64487D0D9304167AB3BA82FEB9B
+:10CDF000C9772F64FFCF7430FE5B426F782B4CC62F
+:10CE0000A9781CB9838271A34BF2397D15A4AAA419
+:10CE1000778CCAE2EF9F3307D7B35DF017F9F14D76
+:10CE20004C3B129D8AEF947AE97DD2319D0CEF93B1
+:10CE30000AFDBCC0E0E7BF29EB06D2CF6FBAC23B08
+:10CE4000D7E3B3847E9DCA52AFF21DD2295964D76D
+:10CE5000FEB1EF90F2F76B478BFD9E2CE829DDA524
+:10CE6000B2A1B1F89EBB6646E17204DFAFCDC177D7
+:10CE70005E7D94BF91F9291DCB02A4478C074184A4
+:10CE8000F99B19A37BFB872326CCC43B87A3FA8F8E
+:10CE9000EA81DF43DED95B90154FEFECFDC919F253
+:10CEA000CEDEA1D12EBABF7AC89E4E7A28EE574B5D
+:10CEB00088BDF44D90CF3D607D87417E63FA3AC8CE
+:10CEC000EF1E2047DF00F98DF99B3297316C37C692
+:10CED000A58F7B92EDC73A47C141AD63F88DCD79FF
+:10CEE000A52BC2F7AD985EA3912EDE8AB96634AE4B
+:10CEF000F7AD98CE269EDAAC9466BFDCA33D3D59D3
+:10CF0000EE87E07863683C237C253C8D7094F0FDCF
+:10CF100017E0F9607BF05C84E708B4DFDADF8F4A62
+:10CF20004C43FF26E7B3E51129E23DD2B773D43471
+:10CF30008CF71D42F31C5E752D33A3BFDDCEE1746B
+:10CF4000B29AF910BEA7710968F036D8F79879A49B
+:10CF500029340EFA659BB615E9EEE44695EEEB9F93
+:10CF60007F318CEC76A7FCDC2EB9D8A43D87E56533
+:10CF7000AA6BAD1BF5CDB754FE8EE8F78753264557
+:10CF80005E05BD6EE1EF1C94D9C7B48B4F79BEAC82
+:10CF90004CF310BF6086DFA3E86AE3EF41C877294E
+:10CFA0003BD2B7E4EFB874B5717E2DF1BBD12AF452
+:10CFB00000E86710F0D9E45F86D379EBB104CF21A4
+:10CFC0005C1F9C63E8FDA996AE91249F0E89B8B8BA
+:10CFD000E181BEF4DE5A81F8DD8137C47BEE8744FF
+:10CFE000BCDC910CED6D6CFF86EB5057B43F5CCF11
+:10CFF000B81FE846077F3FFF6ACFE71F6689F8A1A1
+:10D000001C967355BF9310AFD27D8AE12C83FCF040
+:10D01000A370BEC8E7DE9C6D463919F23B09B4AE79
+:10D02000FF6BBF93C058B38AEB4A762AECB1D4ABFE
+:10D03000FFDD04559CABE4EF2714F0A236BF9BF054
+:10D040007854018FCB77CC6BF7771392C5BBD6CCD6
+:10D05000C5E586FCDD84FC44BD1C19E51C71C44992
+:10D06000A9DECE937C85F8B1F86C213FAE16FFE5C2
+:10D070008CF0DF1A67DA89C73F0DD7FAFC12EDF39F
+:10D08000A33A59DC7E575B3AF877FB5D948EF064E7
+:10D09000FCBD14239E8CBF9F92AC9699E91D4881DC
+:10D0A000A7E9F017F174BDF87D8BD1F8FB16EC7F82
+:10D0B0000E6FE30C78FB96AD1D88EF965E2CE47C3A
+:10D0C000BD23B91F9EEA99940DFC6396B01F49FBDE
+:10D0D000888CCB35FE7E92B403C8785DDF488E6FB6
+:10D0E000DF8908F25FDDAD3646A29C3961E2BF9769
+:10D0F0009411AF69D8FF1D59950AC223917977CD54
+:10D1000083F9CFFA8D2D05F3B3BAF3F7225916FF41
+:10D11000BD2039BF59C93C9EAB385BF06F378FDFFC
+:10D120002ACDE676B248B793E2CC0BB398889F65D8
+:10D1300029B3B2913E8F87F542FA5BCFED818DF82E
+:10D140005E65A7E07B95A8A7A35EDC4DE8A5351F2B
+:10D15000DBED9C0E994EFEF7F6DB7571CE7DB73B8D
+:10D1600075F9ECBA445DFD7EFB5CBAF2DC40A6AE1C
+:10D17000BCFF31B72E3FB061B0AEFE351F7974F9F8
+:10D180006B1B0B74F5879CF2EAF2C9ACF95184EF82
+:10D19000E6EC34C25B7745D8495C1C1FB3EE4EA069
+:10D1A000FB4AF2FC21E3DE3541CFC6734D772BD726
+:10D1B000EB6B92183FB7DAC5F994E9CF379A885BE1
+:10D1C000977A3DF3E9E3D665BC7AEB39489C73E482
+:10D1D0007922245EDD83F397F1EAAD7817EF871AA1
+:10D1E000E9F5856CE15733ACA3BB95DFAFABB9C7AD
+:10D1F0004AF784E4FC8CF33A2EE298B7DADB7F0F2F
+:10D200006A7F36B7AB44F6F0EE417A7D12D815C18D
+:10D21000B3CD78EE46FCFD819A7BADEEE5AE2B8F6B
+:10D2200037AB1F5FCF4C7C37378BDE5FA57B8172BE
+:10D23000DCB7057DEFE9A7B4BBBE59D13C3E8E45B6
+:10D240005BE95E4BC7E371B8265AD90A7AB74ADC64
+:10D25000F3B87D6DDD035834D35A6BE10F0FF82D11
+:10D2600068471B3712F4C45CC0C3334B1E72805E28
+:10D27000F4649599EC621F3C7FEE16D0305BEFEDC5
+:10D280007487731AD2C938C43FF47B533F1E9FFE84
+:10D290006D365F5FBEFA7DEB7D0B9B8EFF33E2FF49
+:10D2A000EDD01DD1A35CC7FFD6FD0B49BF4638C9E1
+:10D2B00073391372AD879897849FDC17127EF2FE44
+:10D2C0008B6B91C5BBD941F7680A302E4FE2EFF660
+:10D2D0007E9C2E7BE57078603DE4471DD5CB57B32F
+:10D2E000A2D15FD0C25CD1CE2BD8CDFF97EEA510D6
+:10D2F000FC3BBA4FD7119F68C31F3AB85FD7117D67
+:10D30000D29FABB86717C22778BC94C087BF878904
+:10D31000E2125647EAF7F1B41C2E17FE2EE5850FF0
+:10D32000CEE77A3EC1D0FF51B352157C625EEBEF7F
+:10D330008DE0F7B92B2DA47733E67D18E334FEBCDE
+:10D34000DE42EF3C0EF730D26F8A362AFE4D4AF0AD
+:10D3500077BE0A7D86775AD4EF493FFC76ADE2C4AA
+:10D36000DF8B98BD465F3EDFC17FA764AEF1BD1A7B
+:10D37000E98FBBC2B9BE2047E8E56EE626BD4CC4C6
+:10D3800051148B3A46BDACC5CFFD8D782E57B91DD3
+:10D390008BE2EFA4DC77A1BF2BE41D16806B78260F
+:10D3A000CAF115E676E3225BE1DA41DCC73987880A
+:10D3B000FB70F0389796DD61DC3F2CFD70A2FE39E2
+:10D3C000DF252AC7FAD8DBF95C1EBF22FD6F46FFB6
+:10D3D0005E8BC344FEA996DD9114E7807EAF68A002
+:10D3E0008733A65D09835383F3D31A559DDFC8980D
+:10D3F0006ACBF6D079F2E11EDAE21C8C6F37BBED16
+:10D400006EC8DFE73844EF788D137630E37C5B7FBE
+:10D41000F76F287F57A7C5C7F5DD9602FEDE09F036
+:10D420004786FB49C6734C64A0DD415A18B896E69E
+:10D4300073B5FEAFC99773B9FFF7F2106AAFADB914
+:10D4400096F2DD573CB008EF194DAD996FC1508091
+:10D45000C64797E68743D3C66EFEE5E188B7114A13
+:10D46000BBFE8B0773B85C6934DC5B90A9DA8FEF85
+:10D470001B573FC9CF453CD73285F6C36285C9F8F3
+:10D480002EE2E7327FA956E4F3797EC94A9E6F14F3
+:10D49000BFABB04DD85B70DD98E2BAD12EB043D8A7
+:10D4A0006370DD98E2BAF13BF22FCC23FFC23CF26D
+:10D4B0002FCC23FFC214F9177E2F62DE945C95FBFC
+:10D4C000ED4687EC0FF4DB8D0ED18FD06F179A47A6
+:10D4D000BF5D687DF4DB8596A3DF2EB41CFD76A1CD
+:10D4E00079F4DB85D647BF5D689E0DBE3198477ED7
+:10D4F000E799A8CB4F06FD7F74C8FE46BF5D68FF65
+:10D50000E8B7D3F5A72DD2B5BF8D55E9DAA3DF2E45
+:10D51000B4FE1D558ACEAF7787788776F68638A217
+:10D520001F5FAAB701E9FE4F11FFB8CB82E745B5EF
+:10D530007E013FB785BB399E6B0B38DE4DFC9E8567
+:10D54000D23C83F0BCD4CAF3F93CCEDB483FE817A9
+:10D550001B6DE17E314CD12F8629FAC53045BFD8ED
+:10D56000E89EDC2F8629FAC5F03BFAC53045BF1886
+:10D57000A6E817C314FD6298A25F0C53F48B613BBD
+:10D58000F48B618A7E31FC8E7E314CD12F86DF4F49
+:10D59000A07FCE129C17EAF33D74E74AA043DDB9A1
+:10D5A000D2A9CBA33E1F5A1FF5F9D072D4E743CBC3
+:10D5B000519F0FCDA33E1F5A1FF5F9D07C748E8B5F
+:10D5C000F621EAF5A1ED50AF0FCD67D7FA5E47DB44
+:10D5D000D9F88D178E60DA18A93CA900CB8879613B
+:10D5E000C534F45F3686292931C0392DCAFDD346AA
+:10D5F0002701998838CA1CD66CA2DFEBC3C323C6A7
+:10D60000390418C5AD667F9744E569F2FE1DFE0139
+:10D61000BCE7EE66F47B34D2BF2EDBBB9953C55416
+:10D62000D60FE6DBAF671C5FD623FE19320FBC694D
+:10D630008DF13EB94B1D791837BB4DFC5EEEB6E55A
+:10D640003CDEDA4857F9425FDA66DA7508EFD33420
+:10D65000172A74EF3AC3CC8E59F2104E9579A84729
+:10D6600064F78B11EBAABC0E7F774CCE5BDA41815D
+:10D670004FD0FDC4A1CD0DA3A2A11FCD37827E1F27
+:10D68000679C95EB0FD80ECF957D7D8A6773087DDB
+:10D690005F23F471CDC7C77FE6A909BC5D386FF77A
+:10D6A000CC535104C7092B148A3B1BBA8379F01E53
+:10D6B000B447CCBBEF8E808AE315AEE0E3C97E0BA6
+:10D6C00037A6D0BDD042D6381AEFB5B0010A43BE56
+:10D6D0002DE106EB3B82EBCB80AD8276EC1F7B9F8E
+:10D6E0006AD880987C8C4764F58CDE151D3FE03D40
+:10D6F000DD7A09ED83A85F926BBD7C0ABDE33CC176
+:10D70000B76C39826FBC6FD1EBF1587F0B73A7BA3E
+:10D710004814D1FD63399F3E9E5D26108B2C8B35BE
+:10D7200098C214C4373B1C17423FB0F3A720BE7306
+:10D73000DD167A5779A2D969A1773A3A88D7B9E440
+:10D7400090F13A067DC1109753B3F4A314B4372F68
+:10D750008E3491DD64F19E08D21BB40D0AF135A917
+:10D7600007158A78BF4B2B5E8F9F8670DF65A1FE01
+:10D7700064BC4E79BA3FC584F713BA6CCA8955495F
+:10D780000F58D20FF500DF4BB70CC67A2BF9BBA2AE
+:10D790009756ECE1BF4B2AFC3BF2774EE788F8AF97
+:10D7A000C26C6F34C6C3C8DF5393F764E4EF984A82
+:10D7B0003B4FE1DBFD8F227E0B9F10EF7EAF29A454
+:10D7C000FBEFC6B8AB52A1FF2D5861A1B8AD05065D
+:10D7D000FDB054C4655DE9F74DD7F633E887F277BD
+:10D7E00072441DA676FD3DDA85E5BDCF9916CE07BC
+:10D7F00066EE62E4AF9AB96C9409DFAB667B38FDE4
+:10D80000CC5CC6F59C99AF78E8FEA6D41BDF15FA70
+:10D81000CCA4CBC904FFF785FE3215E35501CEE356
+:10D820001AC3441C5B12A5D32EF3F8D5490ECE0FB4
+:10D830001AF7F377375A7C36AE571D61FCDD380393
+:10D840007D4E34FB4D78A1D13D14E813F2E3511F16
+:10D8500082FEA6A37E1487F49E9A4FF190050ADDFE
+:10D860002332D2FB384BE5EB186F3B6E2B73FB5822
+:10D8700028BD031D637F3E85DE63D0C43957D2B116
+:10D8800091EE674508FB9483DB9F5AED14A8ABD259
+:10D8900023EA7F9A86F1C4B3D066D88596E1C1B8F1
+:10D8A000BDC82C5E7EB4DF9FA6ADC0BB1F1DD82DAA
+:10D8B000D49F58091E9A7C77A2033B02DA0F905F2F
+:10D8C000DE7E67AEB528845F3E9C3BF22BF7C0201E
+:10D8D000BE8B0CF72917DFD7937EFFA823BD7836C0
+:10D8E000C015F7C7ACE8C6BB8052D99FFB31CFE863
+:10D8F000C1F8FB92727D2C80F198B78A7C6C9DED0B
+:10D90000A3350E820BE59BFA9D9F867134E5F6C622
+:10D9100031487615599505189F1DE4539A273915F6
+:10D92000F9546E007F8FEFB8944306FB44AC9BD74D
+:10D9300037DA29666771FECDC47BE39FDFF7F24ECD
+:10D94000945B72FE9F5BF4F76A651AEE16F2A3FA17
+:10D950007FE65E89F13EC9AF92B5BFF783FE1F3601
+:10D96000F1F713BAA8B54CD88BC8AF2CF90613EF52
+:10D970008E04F1EEA1F78DFF0B290E70D50080000B
+:10D98000000000001F8B080000000000000BED7D70
+:10D990000B7854D5B5F03E73E69564122621210F1D
+:10D9A00048980402A94698BC20BC0F9147B068076C
+:10D9B00092286812268447B068236A0D2D2D139291
+:10D9C0006040F0068D82D4C780CA45A51A955B4198
+:10D9D000693B48B56A513148F5D6DE303C7DB535F6
+:10D9E000E2F5AAFFE76DEF5A6BEF9D99733213F0E2
+:10D9F000D1FFEF7FBF8E9FDF669FBDCF7EACBDDEC8
+:10DA00006BED93960D8A735D36635E87F5849200A5
+:10DA100065BB12B08D618CF9666AC13C46BFBFE53B
+:10DA2000307678B48BB114A8E4F5DEF3703263B5C8
+:10DA30006BAD6C233C7A6014D318D41FF891D5EFEA
+:10DA40008371AAAD475EB04399E4E6FDDF69BAC3CE
+:10DA5000C24C384A20D705FDAE6E8C716F84F6BB80
+:10DA60000B3C896E688FCB775BBD0EC6CEBA19F5BD
+:10DA70009F91E249C6E7D76D3A78FF5BF0E8070768
+:10DA8000B2ADDE7CC6EAF615AC4F73E17BDE74778F
+:10DA900009D41D4EAB07DEBBBE35D1EA82B2369546
+:10DAA0003576E5E33CBD59F3E361CDF89BC658817B
+:10DAB0005B610CFA7F50C0A8FCC8C216F07E1D96B0
+:10DAC00079BA7E266A671D5B35FB108003DF3ACB8F
+:10DAD00034339FA990B1E1562FD360FD2DE9CC8D51
+:10DAE000F01A0ACF6D85BC3D2629043F23DCAC8C9F
+:10DAF0006926681F0AA5B53004C74C6857E1B925E7
+:10DB0000EFE442968370638B703F723DB25C2CD61B
+:10DB1000CF16D84D0CD6B5D40EFF862166AAF9B320
+:10DB2000528B195BB54571DAE0D11287EBAA095027
+:10DB30005FF29285AD83FADC2497351DEABD70BE95
+:10DB40003BA1BEF8A602AB0BF65D8D6701EB58B2A8
+:10DB50006D02730D86D20F6551FF796579CD9643BD
+:10DB600099FB5D787C9AD503F05AE2D4AC49F9A1CF
+:10DB7000F6FA0E45F33BFAD7E7BB55DA67351C29B1
+:10DB8000C2AFE6A66CEB6207D65FB2ACCAC77DB97E
+:10DB9000685FF23DE817C07E7373D88B0CD70DFB1E
+:10DBA000DA99CDE72B0C1B7F318E1F363FF45FE4F3
+:10DBB000C17DB9E369BE3A27EC3B1B4B27AD13E0AF
+:10DBC0004070EADD0CE3B9681E3A8FFA80DFE2C6E6
+:10DBD000F598615EA85FEDF45B709EC5AD055606D5
+:10DBE000A577139FC7DB9E68BD04EA7566A735134A
+:10DBF000E789055824D3FAFC3BE16896005C921C47
+:10DC0000380F5B34DFD11F3E7562BD4B3A12AD4B0E
+:10DC100075CFB758F03C16C27ABA229CFBED78EE6D
+:10DC200029B89EE95686EF9B35AB1BD723E07BE6F0
+:10DC300086988D6C10BCDFB9D5920DF59F22FEA69B
+:10DC4000E07B1CBFE6E6047215DCF70D316E5CE785
+:10DC5000426707EDAF0FBE77013CE0F952A787E0BE
+:10DC60000B78E1630087259DFAF30CAD87C37749F4
+:10DC7000671DD1DB32B3D7EA0C5FC7B683B90AC0E0
+:10DC80006521D0B702F0674E6F16E2CBD9BBAECAA2
+:10DC9000A27DC23A11AEF16ED7ACB462C213C263B8
+:10DCA000892FB5459C7EE57CBBDC669A6F97D8577B
+:10DCB00074BAD45E4C43BA84F35DE78A4E97560635
+:10DCC000E3C1BCD6258ABF45E94FA7923E255D4AF0
+:10DCD0003A95F47BBFC5134853427CA676106B7C03
+:10DCE0002A029CCE0A3E72B5385780EB6F10AEB256
+:10DCF000FD7571AED5397A7AC7F170DCE7647B596E
+:10DD000020F786FC507F396F75127F0FF11EF1ED01
+:10DD100039011FECBF8AFA0B78097E51DFC72FF655
+:10DD2000B40D417EF1A4E2467EB16AF3A1CC5B0062
+:10DD30006EAB7E1E879C977DB8F2E1EBD3010ECCD3
+:10DD4000ECA77393EB5AFA7901F189659F4FE2FCD6
+:10DD50002210995FB8F2BC87916FCBFA923B7F3E5D
+:10DD6000CACBF94D00F9CD1F7FFEDCB189C84798B9
+:10DD7000DFE2B924B49FC5ED6F58EA1CE1F0E3FC83
+:10DD80006E63DEB93A3CAF7A87D5A5C2A3FAD63A1C
+:10DD9000E2BF2C8DB97395D0F91BF1A2AE55D1E835
+:10DDA000BDA6717EF55BE4D3F59BE6319453F2DCBE
+:10DDB0006062C6C6C13E1987AF5CFF4762FDE704DB
+:10DDC0007FBB5AE0F7D50DD3ADE9C9B8DFBA22E081
+:10DDD0008C6CA178BE7089FE79DFB939FBF8FC7ACA
+:10DDE000A497735DFCDCCE6DB210FF39B727DECF90
+:10DDF000607F1FAE7AE6B52BA1DF0777EFC862AA76
+:10DE0000FEDC58113F372C97C3B9B1C111CF4D2D4E
+:10DE100008E3C3CB1FE0E756FFF8ABFFF1AC8BF68E
+:10DE2000CBF9DD669B1FF9F1E2AE27E91C17B66F4F
+:10DE3000B16443BFC105D93A3E5EDF58E06400DFFC
+:10DE4000ABDB7758904F0C2EE07034D203941A0B52
+:10DE5000A333944B4A12E25F301DF14FF647FEF8B0
+:10DE600024CC73D30D31096C6C689EC9059CCEEA35
+:10DE70001B139370BEFAC6BADBD998903C30EEF310
+:10DE8000540CA797C5301ED2EDA9E9EEAC55849F7E
+:10DE9000A68872B7A8809FE3CF00DC31800F43E3F0
+:10DEA000BA1E41380CFD41AC1BF9C7C891413FCEA9
+:10DEB0008BF88DEBB602FFB443BF912B831FE33A7F
+:10DEC000460286E17B58C62751C986407D272CBB78
+:10DED00014CA1C95970B0B389E407B00DB5972B01F
+:10DEE00004F72FF1DB88BF56F6507B0EF2B164E6E3
+:10DEF0006E7185F0558E23F155E273B4FDCD2BE0A4
+:10DF00007CE57CFB3B95CDE1698D85FD257D85FD1F
+:10DF100001B2962685F625D7C7F2605DA83FFEF8C8
+:10DF2000921D1B619E53CDEEAC46C740FBED9C3964
+:10DF300024C27E8DFB9474B3C4CE691AE866501077
+:10DF4000D67DAE63C420943BA714906FF0DEA91B6E
+:10DF5000624CB87EB9AF5D6BA133AC75F75A3B9597
+:10DF60008FAE05C21BCDD89EB569547F7CAD8BCAE0
+:10DF7000AEB579F4FCE68224BE0F168C473D13F44F
+:10DF800001CE0F029C4E7A9A46D0BEE473A917F4D4
+:10DF90003883F14961FCFB74A3909B2CB819E99B71
+:10DFA000358D600FC3543D1DA7E24DF9889F7C7DE0
+:10DFB000F2BD9B2CBDC40F59BCD5F530905CDC4D37
+:10DFC0006FCC4C85F99676661728F05E4D53514F0D
+:10DFD00013B4D7B4A6BA916F2C75B8D6A35C5CEA1B
+:10DFE000CB76A35C8CEB2C38BB0DDA97B65EECC617
+:10DFF000FE3729CC83F405FC9321DC96B1BE9F66E5
+:10E0000007BEB65CF0B5E5C82F015ECB9A0E8D74E5
+:10E01000C2FBCBDC310528DF976FE376C25C136B64
+:10E0200057500EB77866211FEBBD4771A3BEC9EEEE
+:10E0300005FE6A0FF1577F9EA7A300E5D297807F68
+:10E0400030FE45288355DC579786FB60A08F3CCC7B
+:10E0500070DD1ED2EB07097CE9E93C11EFCAE7F05D
+:10E06000467D9D793513F2DD5542AE0DB7F69EB86B
+:10E0700015F59978937B27E797AFBB709F2FABCCB3
+:10E0800046F246F417FC74F84F4BEDC8DF56C5E76F
+:10E09000A4925EB54D25FE28F1A741AC79E98E8AA0
+:10E0A0002188374BA11DE5DD767C082C747DE7A522
+:10E0B0004310AF966C9979B70FE4589680E3697373
+:10E0C000701E9ECF7B3B52939A512FBCAE6514833A
+:10E0D000F6253B6ECDC2F2BD1D310B90DFCF70CE69
+:10E0E0009B9108FB5D766F62811A26377E2DE8F1E1
+:10E0F000DAEB2E4D457B60E55F0FDDEF1C01F3038E
+:10E10000AC11EE9F76C5F97DD065E5DA7D592AD050
+:10E11000D85F6DDE67916F7FDF74E0CA09C8FF15B5
+:10E12000FFAE74EAEF4A7546A0F73EF90AF8EE0230
+:10E130007CBEEEA76FD3387F361DBE6221BCBFF216
+:10E14000BAA713709CEFDF75749C139EDF3DD2FB62
+:10E15000229ED707CA8E5D4E144CDB768C41B9FDEA
+:10E160005B6147CD4DF25CB910E1FEB24A708F366B
+:10E170005FC33E85E02BEB35FE41A4CF7A03CCEAAA
+:10E18000C4D2C9485F7E4F654DA80F48BD463EFFCB
+:10E190008380CB7B833AB2102F56ECDA9A8572E5F6
+:10E1A000FD785EAFDE75D52BC8A7BC0FD9B8DE6E83
+:10E1B00066A427D7FBB8DECD1A805ED343F39F2E2B
+:10E1C00088A3F5AFD856A4938780A1F4FC7D332BA8
+:10E1D000C7750C6FE92D40FDEB1D7360299EEB3B6D
+:10E1E000A0D7A27DFB6B21CFDEE95067E1731F1042
+:10E1F00012EA23EF743C1D3FD211D2E3E28BBB0243
+:10E20000C8E7AEDB9B58A8729422FCBADE29F993CA
+:10E2100063D6D064D2C79C88A7ABF6BF308BF13AE7
+:10E2200008C2E8F0BC56E8617DF5BD4F925DB7725B
+:10E230000FD72756763DF962068C73FD3EA14F0835
+:10E240003DE53A41CFD7EFE570B96EEF096B7DB888
+:10E250003D9297B47E286882B6C2410BEE72A1BD92
+:10E260000D8B9808F8DD655AD80C4C3CCBEDE47A60
+:10E27000A5B997F4C38D79DD64975FD72AC6CBEB38
+:10E280005E9F43FB9D37385C1FB2175A08AEF27D84
+:10E290008007BDF7594CC218E47F81EB62DB51AEB9
+:10E2A0006BD73BCC58B65CE720397F6FA329CF0CE6
+:10E2B000F0D5945837EA714D76DEFF96D8849D5894
+:10E2C0001E88E5F5CF62B2484E7D66F23CB90CFA85
+:10E2D000DDA21E896123F0C87B0F99A03E2AC53BB1
+:10E2E000BC10E64F65403D2ACA8F8082ED1FFDF2CB
+:10E2F000DD225CC7D4E1C14F182CCDA2242E9C0195
+:10E300007832BAD0C9F97B7EB008F13DE579CEAF5D
+:10E31000EFB3B0769477CCEC61F3E17900F9179E16
+:10E32000FF17263FF2E3034AE0C170FDABBA90EB62
+:10E330000F1E9BA35D81752ECFF6BA711DDF532C86
+:10E3400097A0EAC25C6A2E8EFF9185B74B3DB64C12
+:10E3500030E14C618F5933D21CB8BF16012F45D321
+:10E360005813AC635DFEF3F5882FB7F5DA990DE627
+:10E370002FEB8D25BD3633A39CE45B8B808BE24A6B
+:10E380004699C39ECF37F96CB0DEDB98DD8FFD99DF
+:10E39000DDA0FF9A62347C4F39F0DB2F90DF0F5500
+:10E3A0003F3E3408FA0FBD4571B7409FDA7367EFFF
+:10E3B0007B9DA1FDEC2F40F82D4DF15E5608E7D96D
+:10E3C00073AEFC8417CEFB366797DD9DCFC70BDF9E
+:10E3D000C781D55F24249942EBFBA8F7ECCF9F2996
+:10E3E000C6D24E72A8EC80CAFD4D86F57C94E6320A
+:10E3F000D339F5DA0326ECEF30F91505FB1F7A1B4C
+:10E40000D75766770454D4E3ED963F85CB1976242D
+:10E4100033F1ECC5245AD8DF405918D2C2CF6FEA85
+:10E4200020BD7DF98342AE3FFE409C9384AF841BA8
+:10E4300073692C5CCEFCCAB1AB86FBB1381DFF40C2
+:10E440003C3FF7790EE917E70E809E1141EF94E506
+:10E4500051D433407F08E468B7149684E46C9594F3
+:10E46000BA420EAB62DC2A01AF2A8789C3A7D20069
+:10E470001F813746BC309EBB3C4FF6A3232F0CCAEE
+:10E48000A673BCE45F189DDF3A5C47CF1787DB803B
+:10E49000DC5886AA9DF066FF239E5F206634EA154D
+:10E4A000779948AF40BD0FF544C93FBCC807C6D2F5
+:10E4B00073AE07E631E21BB56A2CF9198D7C43F285
+:10E4C0000B6F2C9463906F74103FB845ED7DC1A421
+:10E4D00084F8C4F0F2E02528877BC0F4C7F6A0A931
+:10E4E0008B9EBF549843F8328C1D49C7E760AF94A8
+:10E4F000A01EA8DA1FBCEF348894CE0D9C3E5A2C87
+:10E50000FE7B96217FA872B851AFFBC86FF25960AD
+:10E510009D9D899C6F74AEC82079FE11137C648127
+:10E5200095F8C82493C947F6D6C20CB2B7FAFAE7F1
+:10E53000BAC8BFFA8BBFAAA3B661FB3C3BC9DD4E8C
+:10E5400094C750EFDC7C09B53F27F9D20ACE973A41
+:10E55000E769E9B1D83E6F8809E7DB9EEC7D1ECF05
+:10E560003D43F53F1283FAE4F763D9C3F0BC335B54
+:10E570004B47797BB7E259B814DFBF84AF3BB83063
+:10E58000F6F15DFC7802E84FEA698ADFB9314C3E6A
+:10E590001D1ECDF9FA70DF897B105EBE329687FAB8
+:10E5A0007C0FE2E7D8D0798155CE9A9242E7966CFB
+:10E5B000383789AF3E0B9C5F323FBF754AF4F34B4F
+:10E5C00016E7A734017E13FFE7E7738BCAF93BFB1D
+:10E5D0001518E0507E9CE20DE27E5B6E8073218117
+:10E5E00018BC19E175DFEA780DF7D163620D5D1192
+:10E5F000E8F643C11F184A63A08745821E1649BC2E
+:10E600005D63C0DBE0B0C4B371026FE1FDE7E23CE3
+:10E610007FC679FFAC1C1D870F0FFFB7BA20D23C15
+:10E62000FF25F8CF41BBF7D34292AF653A7DF57035
+:10E63000C1BB9928A7D8978786A1DC7D2AD9F33951
+:10E640008E1B33B297FCE63DE9BD16DC67CFC20FE7
+:10E6500032512F5AD4F45BA2AF0B5DE7BAB85A0B14
+:10E660008E9358996D0942995A99FD02E2CFB139BA
+:10E6700036972D821E7270CEE84CD47FBBAB4667B6
+:10E6800022DFEB86033C82EB33BBE291FFB17D35A9
+:10E69000C4C7AA041FEBAE1CC19F0BBE19F67C7346
+:10E6A00031EAB50E933B5C5F3096EF03DF0C00DF81
+:10E6B0007C17EC332CCF807D1600FDF514D86758FD
+:10E6C0003F01F61996C7C13EC3B27BAD9BDA5B2A08
+:10E6D00047EC0BC2397FDAAED0F8E8BF8DA4175FE4
+:10E6E000FB90CA02123EF07FC3BD712C9017AA2F77
+:10E6F000EB1CACAB2FD93454575FDC3A4257977AB6
+:10E70000A477CDC5BA712BCA8B74FDD6C58DB1E087
+:10E71000B926961770B8971710DCBB2F8F02F7CB6E
+:10E72000C713DC8FCE199F89F03C8A7047FBCDEC74
+:10E730008EC77390709F2FE63C5A5EC49F0BB887BC
+:10E740009E570C28A73E4478DB10EE762ADF4578EA
+:10E7500013DC39BC4F21BC6D08F73C2A8F23BC4722
+:10E76000E3B800EFE2F3C37BE51E5507876B1FD2CA
+:10E77000C3BBE1DEC106F80FD5C171C9A611BABA93
+:10E7800084F7E2563DBCBD6B8A0CFD18DB0470A813
+:10E79000C07F001D1C2D994D7129B39DF9E280AFFA
+:10E7A0002422BDC1FACD950AD78FE0D70174381F56
+:10E7B000FF01F46576F0F6D6858A1FF912EA4468FF
+:10E7C00057005C0371406715CE5167902F5D851C23
+:10E7D0004C45BBDE4FE5352C40F459C382545FC431
+:10E7E0007AB3AC505EAF06D6A3FFEE55BBF7C62298
+:10E7F000A0FBFF9AF3468F8244E9AE1B8D74CE1CBA
+:10E8000049646F463B27E0945C1FC7AEE3C4BEE09B
+:10E810005789FC1FDEEB8E1B73F3CD700E1FD505E1
+:10E82000C7E1FC2BEDDE07924D345F7311F2258BAF
+:10E8300077F46078FE6AC9F84CA47FE649D1D949DB
+:10E84000D1E6DB829B0538D495039C148CC371B848
+:10E850009CAEE27039B8C566457FC6E90D16F25721
+:10E860006E8DCBCA42BC3DDD363B0BF1AE79CBE8B9
+:10E870002CC4F7F9EDB3DF47FE3D539D5B8BEF9F53
+:10E88000ECE078CFD80DA477DD2CCEEEA48BB903C5
+:10E89000D05E3527DEED83FD787DD909B45EA639DB
+:10E8A0000AA05FBDD8777DC7F2B9389EDCFFE24D84
+:10E8B00036DDF97FAF545FAF62D6109E65E3395BFA
+:10E8C00043ED78FE6AF520EF007674D31F77BCF233
+:10E8D0009BB0F11E2B8A4F46BECAC6B3F17F53438D
+:10E8E000EF4783EB676BFDAFFC26370457894FEB8F
+:10E8F0008B3C7B111FE031C5DB8096481E5CDFE757
+:10E90000D73A9080F0DB12F7ABDB27215CDEE47EA8
+:10E910008EAD71B5C43F3E44BE9D8D7CFAAACC60DD
+:10E92000185F90EF07053F3DF6F3AB888F1CAA4AAE
+:10E93000A5784CF75EEE5F3E2EE8BEBBF2AA9A9B2E
+:10E94000817F76EF5149CFEBDEF7C90BE8A7E9EEFF
+:10E9500052DC02E4A6F071BBF7013F477EEBB150F9
+:10E96000FBC13D4FD33ABF2D7E5EB95FF0F36D7CA6
+:10E97000FEA5660FF117E65DA0DBDFDF8BAF9F8F93
+:10E980009F1FB3703CED3EA692BF8DF9B42379432F
+:10E99000C2F0B39CE36773958D71F9CAF9CCFC4A58
+:10E9A000A003D4F399AB046DCA0FF755A490BCDC57
+:10E9B000643989FAB413FE43B96D846315339F0C2F
+:10E9C00086E1EFCABDD03F6C7DF3B13D0C9F8DF861
+:10E9D000AA1403BE5E1CC2D74FD99759D61CDE7E3F
+:10E9E000644888EFE12F9CBF48BE25F117F8562DEB
+:10E9F000F235E02B8E62C0DB1F1666FF32A884F171
+:10EA0000950BE4635BE2FE4A72706BDC5F098F8FEB
+:10EA100056093C063D039F775FCEF50DE65F40F457
+:10EA2000B048EA11164F3CFA498FAD199C80ED278A
+:10EA30005A2B88EE243D19E73B2EF04FF65B64EE2F
+:10EA4000B5B823C843EF1A3DFEB0DD0B08DF6F36C3
+:10EA5000E059B4F18DFDE53C8B0CF15EE33C938B0A
+:10EA600085DED9557341F32119F6BD4FFA6D6C0857
+:10EA70002F55E4039FC50749FF5AA0D3CB8E978F2C
+:10EA800027BDEC68E52711F5B3E3959FBC3A1EE975
+:10EA9000ADDC22E8BD81DEAF10EDC675BC2BF4867F
+:10EAA00033827F9C12742DDBD51D6D43AE46BC5F57
+:10EAB000A3BA915F1D9B5B4478FE9EBF8AE63F5ED2
+:10EAC000A992BFA976EF77AE467F935C8F9CAFE2A9
+:10EAD000F24FE2D19FF629C00BFD631516774A2449
+:10EAE000FDC2088F68E34AFC017DF618EEF328F2B8
+:10EAF000516CF5EAE17414DF87F6F93B548AB719D3
+:10EB0000E17468CE68E24BC7770BFE0970453DBCE7
+:10EB1000E15EFDB92EEB8C33F09BC1BAF6F9555C82
+:10EB20002F93FC5AAEEFE89A1129CC71E1E72DC77B
+:10EB3000B9507CB956BC8F62F36F247F9374E38124
+:10EB4000A568982FC7D07E91A1BD505FBF403C3EC5
+:10EB500021F047CA9F1331EE9A4871BCE397D91A46
+:10EB6000C2F313FEB598FB87FFB558C4BDBFA2DC46
+:10EB7000DE69E083E77B5FF2BDA622CF23C8EF58B2
+:10EB8000A082E2D917CAE7C2E4FC93C548E741C5B1
+:10EB90008AEF4BBDEADA722E17B6C63D4E791A7F60
+:10EBA0006EE67AD1C1661BE1E15F2EE7ED7FF9B732
+:10EBB00077499F3AB47F6B42B89C9778F9FEBED9EB
+:10EBC00009E8173E5DF96042B81D20DB3FA87CF0E4
+:10EBD000F68944DFAA7BA073F9BAF64077A5B0079F
+:10EBE00084BEF07D73D7FF157BC06807CC54EF4D12
+:10EBF00040FE67B407DE7769094E828FA03B21573C
+:10EC0000AE15F0F98B454BA038DDEE222E570CF8EF
+:10EC100029E17056C26153C580787346C805595FB3
+:10EC20006A66040FAF9D91BECC3A1537C6BF304D12
+:10EC3000A514CEE54865C183E8BF92FD7F54C2F3B9
+:10EC4000A9E43CC7EE53BAD0BFF2DBD68A9A9B3117
+:10EC5000DF616E1CF155D97F996F60F9756C73E2B5
+:10EC600015388F779BEAC6475EDF8994F0F54B3DF8
+:10EC7000CDF8DE0A73C705D9D15EDF8E04B46F8389
+:10EC8000629DC1833156577CFFF7305E83FB5F3155
+:10EC9000577537C3FA576CE2EBAAF2A9EE1CA8FF2E
+:10ECA000B6E3C12B900E4E35594CDC3E70EAF0FCB9
+:10ECB0007047D16BD8FF7439972B272A2F4DC03C52
+:10ECC00038DF368B3BD7D57FBED108478CF3ECB30A
+:10ECD00099D07FFA7E938505C87FE1217BF9D8A67C
+:10ECE0001154BE8FF0E3F6359D7F5109F7739DEA0D
+:10ECF000A81FC2E9C945EB90F87262B75AEE8FC0FF
+:10ED0000AF8AC47C67BE7C82F0EDC5DD15248F4FD1
+:10ED100055F279CEAC7127203C7FB749253A3EEDBC
+:10ED2000E3E31FDC7F6BC244D8C7FB957C5FEFEF4A
+:10ED3000BBE5B509B0CF60A594C75C4EC9FC9EE0A9
+:10ED4000A61114EFFD732BB7BF25BDCB78F8A5AB8B
+:10ED50008F25D0FB52CEED59A05B7FF7EE53648731
+:10ED6000BDBF0966E372CE5180F986FC75B66CAE04
+:10ED7000FE7CE757C6E9EA8BDAF5F2AC793FE75754
+:10ED8000463D77E926D083D12F65B0F3EA9B8B12FD
+:10ED90004A917E510FC63C93872B5E48C57D74D542
+:10EDA00050BF4A1137ABEFB4E9F84155ABDEAE5B6B
+:10EDB0006CB0E3FAD975067924E1745D14F924F591
+:10EDC000B96E61AF1CB7786A22E553AC2EE17ADBED
+:10EDD00022A0DF348C1331AD6A9280F746848FB560
+:10EDE000F7D35CD0A7BB55F714D4ABFBD181410F4F
+:10EDF000AC28D7C397B97DAC54FA235CA4DF9F45F8
+:10EE0000FDBF7DB090DB3E9043F12897B41F97A0E3
+:10EE10005CBA50FFC105EBE7B5423FAFD5E9E7DD8E
+:10EE2000D825ECFD835557919FEAD8E55791BE7ED2
+:10EE3000ACCF4FE5D1F9A9A45E776C6E854EFF0C7F
+:10EE40007B3E880DC04FA3E99B27901F139FE6725E
+:10EE500069BDB0235B851D796CAEB0239319D19148
+:10EE6000D9ACB148FCECABEA6F8B5BF572C9BB4621
+:10EE70006F3F3E33DDFB5409E0872DED22DD738BC0
+:10EE8000B350EF3F34E0E750C6FDE7B7A22F00E0F4
+:10EE9000DE52C5F34EF139E6BF48B9C4A03FF28B4C
+:10EEA000AA4D17F937F2769F5A88E9720C553AEA5B
+:10EEB0006FE6754DE1759F43B4AB22EFCD02F513BC
+:10EEC000D9EE05A877615E4F5C126F4714190A7876
+:10EED0009D9014927FE8D78FE1A1755F02BC37AC9B
+:10EEE00032FB3748D798EF330AEAC74AB2096FD2E4
+:10EEF000D0A55F48E30730AF27D8328DFCCD15F69B
+:10EF0000041E9F073B7A60FC6BE6F650F9609A6C32
+:10EF10009899AF272A3E8B7EE7C3E7303DEC24D19A
+:10EF20000B3391BF654BDC180BE2EF7C872713E1B5
+:10EF300000F84EF2B5FB9756E2C307ABB81FB67B9D
+:10EF4000CEF8FB6E82E7639E70902FBD7BA9F483A1
+:10EF5000F7C687E3EDF135A74CC8977FBF8FB9316E
+:10EF60008FF1F89EEA175E81710EADA9DF5C8274A5
+:10EF7000745825BBC1E8BF9DFEC464B2BFAEBC5C83
+:10EF8000A5FCEEA3E52A43B9767453ACCE0E09F97D
+:10EF90007555C28F4F0F98A91D4D9D3CCCBF42FFA8
+:10EFA00026E66995F3737956F0B32E718E8F083D7E
+:10EFB0006697A09B4E41377708BAD960F4EFDECB55
+:10EFC000E9E6E83E301C40AEBF3EB7BE8CFCD6DB67
+:10EFD00018C5A1B3E7A81B8B617F17DBDC1684DFA4
+:10EFE000F4B9051C9E958A09E33715E50516A4F7C3
+:10EFF0008B07BB2CC8472BCAE7517D466536D9F92C
+:10F0000007D7807C447B3FDE9D89743972AE2D60CA
+:10F010004A40BBB188F8C4A4F74C3A7A2908C4EA3C
+:10F02000E8EEA2879274EDA3B765E8EA299E1C5D1D
+:10F03000FFC1E57A7A8C1D59A8E7BB8CEB8512CE0F
+:10F0400033D5C9E4E73A1E92A3D42EF511E9AF9364
+:10F05000FD015A3ABED62EE4C818A8633EDD86CA22
+:10F06000163BE64D7CDA6576F3F1AB493FB067EFCE
+:10F07000B5239D606815F3ABDAA5FE29FCF74C6358
+:10F0800086756D6218673D5ECE089F62463205F553
+:10F09000AF4E71DE778A7981AF4EB7909F8E9FE336
+:10F0A000E0B91EEAC73C7AFB200DE9AC10F184BF41
+:10F0B000FF88787F97C097E3E50FAE8B457C58C0FB
+:10F0C00048DF98A9AE5C87F1C4E37319D14957E0D2
+:10F0D000F9585C3F8E83F981CF461BA7F2E977AEE2
+:10F0E000C7F5ECB6D238150FB1A98827177DEFC444
+:10F0F00007AF21F8B6390FC5B0FE7278CC439A1B22
+:10F100008193F71E0B58A80C68C87FF2DE3BA26102
+:10F110003CF0A2BFECFEE07186F372B9D02EF0DBBA
+:10F12000C85F1F7BF8178B513E3FB66B7BE1DB500E
+:10F130007E67DD3D194D503EB2EEFBDB6F7285FC04
+:10F14000A5BBAE58BEB313EAA3BFFB9347F7225E3D
+:10F150005DF1933FECC5F55EF1C57F3860FDA35AC4
+:10F16000E219D2B75C9F719E34D6AE605C14F92868
+:10F17000F165B38FEA753EBDFD6394FBD8DF0CF0FB
+:10F18000AB687A8CE2CB69E2FDA397DFAAA830EFE7
+:10F19000DB759CAF74AFEDED9C61A1FE01EC0F7CC3
+:10F1A00092F235870E03B682EF5B7D0AC6C54141F8
+:10F1B0007263BC371DDA919F33978BF4AB2C89BFF8
+:10F1C00082AFE0350746FE4033E1599E884722FF73
+:10F1D000457E7FE7381E071FEA601A9E6FF9739B12
+:10F1E00014CC537BCBEB72935EB096DD3503ECE42D
+:10F1F0008B549E779157FED6D5782EB055B3B73045
+:10F2000034EE6EA1D7953FE7A0BCEDB7763B769084
+:10F210009E7FE40A53B87E58F6D89F9EFA1DE257A7
+:10F220005D0CE197516FE916F4D157B7B8EEBB0901
+:10F23000E0E3FBA59DDB559A2B93EC74B72B13F3FE
+:10F2400077FAFAFD44C6D3DCFF81FC7C7E751CC5D1
+:10F2500019645C492DFFB80DE97151696309EAEF42
+:10F2600019780E834371ECB7575829DFC0A7C452F1
+:10F270005E7AB478F5A171D9229EDC3896D6C11A8F
+:10F28000C763F9C98296FBACAEE8F2AA559C6BB491
+:10F29000768B957923C5950F8DE3FE90163C074B31
+:10F2A000D839387E7F35C687A39D0333FB0B29CF22
+:10F2B000D26E1F897920A9E2F1D6B89FBE8AF2AA40
+:10F2C000E7189757A94D9FAD45FA937E8BDA34D650
+:10F2D0001737D3E03D8B782F55C459908651FFAE38
+:10F2E00015F1A29E1A46F1A2D4A677FF1BE1B34501
+:10F2F0008C5FFB261FDF6A0E1C447CA975B848EEA4
+:10F30000F4A424B8F15E13FB92E7A764308E8F72E9
+:10F310007C26C6C795B3B075A7C656BF4ED7A7A65D
+:10F32000B2401CE28F62A77933D6D828AF55EA578E
+:10F33000A94DB7DEA08ED18DA7A05EFD5635B7B71B
+:10F34000D1ECEC1B375BA757919E655C877CAFC700
+:10F35000C2F6A1FD1BA667911EC6C2E719A1AB0BA1
+:10F360003F9ABE6E49B3EAF8C45B5F560C6AE4721A
+:10F37000C0953C8EFBEF101E521F937A5BBF710548
+:10F38000BD87E9973EE417328FA24F4F6A08B39BBF
+:10F3900072FABF27F3D5E4394878467BFF99E95ADA
+:10F3A000C278D2B302348E570C638A7364117C0D19
+:10F3B000FC12D816CFA7177A286891BA3C06A9572D
+:10F3C0004AFEDC23F86E303B487E4399273E0CDE34
+:10F3D000C9423D687C22D183D44F8FAFFD88E2EFD4
+:10F3E000B5A887C2FCC1751FEAEEA114974D1F395D
+:10F3F0009EFC73FA7C89B0B82BADD72BF8E64CD5C0
+:10F4000041792B3D2CD68DFCABC727F4B13FC6917B
+:10F410003E26F985913F5CEED6F3FFEF95EAF9FFC2
+:10F420003C6DB0C12ED4C7A9AA3C8678F89B7374F2
+:10F430007C53F29F5BD0CDA7A27BC943719DC38251
+:10F440005FBE26F4402B6BA4E776CC171D81FCBF72
+:10F450008B4A073B426502EBA5D2C99C945F93C4DB
+:10F46000DC5426330F9543582395698CE75365B0D8
+:10F470002E2A87B1235466B15E2A5DCC69C23287D9
+:10F48000B9A91CC93C547A9893E2E46FC607338F3C
+:10F4900002FCE65EC5C86FCF7C7BAFD1E09C7AAA48
+:10F4A000441D1108E96A26E3C8E77B8AB7CF91F5C6
+:10F4B000A7AFD1B07D3AEF5F3F7EFFCF7C0EE23742
+:10F4C000A2FD17BCBDAFFE6FD74CC7F72D26AAFF14
+:10F4D00040F47FBC585B82F8DA349ED17927166BF2
+:10F4E000CBC2EB4F16690DE1F5E325DAB5E17556B0
+:10F4F000A4AD44FC91F5B145DAF5E1F5B612AD9154
+:10F50000D779BEE99B168DF45DF8ED56C6717CC3C4
+:10F51000DF20D5DB4474B34731E3B9DA04BD59F1D8
+:10F520001C55A423B7DD86A587E7FD04631CC138FD
+:10F53000D300F68F818E82C89F000F2F51BC6D348F
+:10F540008F819F283E913F98AC8F9B00BE935F3583
+:10F55000B886DBE98C456E97F39E0FCF9916E6E7E8
+:10F56000CD098D1B6D1F46FC3D22F4BC6EA1E7BD8D
+:10F5700029E2C87DFB0E9A13CFDA43741CDD3E34BA
+:10F58000B3B3E1FCB2DFBEFF546301BA0E36D99CBF
+:10F5900028EF7A62D86B68A7F98EA90CF58CAFBA00
+:10F5A000DE9AA2594F72BE38CC49F903725EC16728
+:10F5B0007AF09FA0E75C3C48DA976E3B8737B73B11
+:10F5C00012C5BA5A66245D9647FE7CAED7E75B8EBD
+:10F5D000CC9B0DEB4CDDC4FDAA0948DF183A7BE259
+:10F5E0008F4E8CA375CC3431E4536DD2CF6BF0C702
+:10F5F0006D99B1CA19EE0F6E4BF02B18BFCC08C431
+:10F60000703F4432F3C7A01C2D779753DE8C4F75A3
+:10F610009663BD9A5D9107F5C59DAAAB1CE63DD4E6
+:10F62000F9F42AF4032EA9B6521CC3A2CD7A9FFB8B
+:10F63000FF78FE4692C0F3D60D367700E198E220BF
+:10F64000BF6D7E5B6139DABB2D8EA424C4C5A4EAEC
+:10F6500065E4376C71B85FC2FB1D3EA789F2139950
+:10F6600053B35780BEB2E3267339F2F1CC278B1324
+:10F67000D4B0759F6A3D17837190079C266A7F609E
+:10F680004D997D9903EF3182BD00E521E7490DF5E4
+:10F69000F7EDD007FD8DB7379CEC1835C0392694AF
+:10F6A0005B75781BE7D6D76D067FA3C5A017F48ED0
+:10F6B000177922E3D8383CE7B18F7E49F6EF2287ED
+:10F6C0008BFCEA65ED0AE5C7040FBAB350DF3CB521
+:10F6D0007934E5BBB4B6EBFDD1C14C9685F77DEA34
+:10F6E0003A14D257D5D68F9BF1BDE179AE741C6721
+:10F6F000B8BB37DD19467F0FFCE4873128EF5AF19C
+:10F70000C21AE111E3712161AFCA7BE575CE733591
+:10F71000A8F72FE978C383F04FD44C4433C72DFEAC
+:10F72000343CFF8DD3E7135DE23D2DD463FAE9A3AA
+:10F730009FC33AC3EE27B425E7C4E2BC21FCD5122F
+:10F7400070BFA73B8A483FDAD95E46F7018CE3DCFD
+:10F75000B69675A1DEDAB6D6DE1549FFBD2DCB9380
+:10F7600085F7B7CF6C99BE9EC1F99F39B8220DEFCE
+:10F77000BB2FEDB0B11857FFFEA7B78CA7F996E2E3
+:10F780003D6A9CB7639E15E5C6ECCEE95684DB6DF9
+:10F790006B173C193ECFCFCABCA34A81FEE23A9E0A
+:10F7A000243C71B0800FE1FAEB295A16EA17A773CF
+:10F7B00059C47C4E77A942FCFC77533C743FE54C1E
+:10F7C00066E47EC5A55C3F7FA4D445FDEBCCECB5DB
+:10F7D000E5C9640F3A915E4FB51751FCCE8271773F
+:10F7E000908B967D5FAE45FCFFA4BAFEEDE5D0DEC2
+:10F7F00036E7CAF7B01C6B6D24BD99FD5E257A0013
+:10F80000BD90EE89FD67A5DDD912964788FAA3A6BB
+:10F81000F36B7818DA1F9676356005FE6E397096B0
+:10F82000F470C4572D0C7FE9374EE8F3223F246D66
+:10F830001CDDBBA35FDB6557FA03509E6CAFB74777
+:10F840003AC7E8F3878D8BFAED0CA6C584CD0F522D
+:10F8500031407E6D2F9FAFAF9F68073354A3F509EA
+:10F86000BDDCD82ED73F7A9B9E3E9789F391FA79DB
+:10F87000B4F57EC7AF7FAF058313949771858E5E15
+:10F880002E52BB56615C85BDC5F93FD875CC13219E
+:10F89000CE15E2B3B0F621027E00CFF5C9F3C93E22
+:10F8A00089B60EABFF88963D2664BF7D274DBF2EDF
+:10F8B000D9AFA594C7C16D7E16B0246019A0FB1CFA
+:10F8C00036781FE5F7A7D5373A2F8B4017B234F2B9
+:10F8D0002DFCB9C2E23F463E81683052EA2326FE43
+:10F8E000BE16C6E7E2EFE2FAEFE96D0AE9BF1BB721
+:10F8F000F03C8A4FFD5027E5829F13AA167F13CA5A
+:10F900008E23ECDEE1B2E7DA6FBFC8A583DB128A93
+:10F910006789F6F71EFDD16BD8FEEEE33FF2E07289
+:10F920006F4D5E92C0F9D689C538CF998BADE48F03
+:10F93000C19F5DE207745CEEB7E9F070E3FE47B784
+:10F940002D46B9B3DFEEC674BCA5DBF4EDB6B4B09A
+:10F950007D318E5F3E1D9C8239F3808E8EFFE45F89
+:10F96000E97E782CF24FA4C73536BA17D68F0E4AE7
+:10F97000FBBE334278BB381487A2FB2092AE4E6E9A
+:10F980006A39A3C238EBD7585DF43D0583FD75DCB9
+:10F99000354F4B0B8B0F5BD7F07B9A2CDC4ECC0991
+:10F9A000ED5F8E7BDC576F7739FA8FD70FEFA28C24
+:10F9B00037A84CFB2DF2C5B432CFCBA5148FAEA720
+:10F9C0007D37ED5B73FC15E8737BACF7D5D2125C29
+:10F9D000FF88710ADE9731BBE8DE606BAB2906F960
+:10F9E0007E4797396624C2BBD54472BEA32B3976B5
+:10F9F00024CA258789E2A72857D430FF3E9BC0F947
+:10FA000064487E7812C2F59F58818F67F284FE3376
+:10FA100083EB3FCA130748EF686DE3712AA96F387B
+:10FA200005FE385B791C329AFE838C07D71D5FB2C6
+:10FA3000C4897CAD2D817F7F63C90CB70FEF735EE6
+:10FA4000EA60243786E3A50AD4B31CCC3F1BE651F9
+:10FA50009D5CBFF17630D267921C0E37823AB5D3E7
+:10FA6000EFA3756B9CCEECF01FC233364F6338BEEC
+:10FA7000D9A057580D7A836AA87F51AAD72398D066
+:10FA8000BF653C387EF3C07940D2AFDB21FC13A0C8
+:10FA90003FF9E8DE4829F323DE324D73250F09D9FB
+:10FAA00001E877C4F6B452B6A3252CFEA4682F92C1
+:10FAB000DF40FA25A5FF41FA39C69482BD9610E6CB
+:10FAC0008FF81598962AC5C39226009E64033B20A2
+:10FAD0007B329F29FC7AC6D7D4D39B2E2CEEF3B36E
+:10FAE000E7F9FDA05653AC7B6776FF7EC593397D61
+:10FAF000C61EC21C4998E52A3BDDC399A9EEA17B2D
+:10FB0000F75B8B4D3CAF991D71A23E903F81CB932B
+:10FB1000EC32CFC5B81FE6F06423DE003C7C16BC97
+:10FB2000BF27FCB69937E7C4A23EFC76FAD92DA8C8
+:10FB300097FBDA4CC46F241CB39B4D77201A86C503
+:10FB4000E702E6C2509C6DA3E79C0FEF0BA74EE6C1
+:10FB50007ED7D879A70FA21F74C34813F9D96F8D28
+:10FB6000D7286E07F4635779BCEE258CB7B5BB92E6
+:10FB700092F0BB3B8F27F27626CEF1EEF8213BC206
+:10FB8000F34BE2C4BEEF5622EB2B7F9CC4E54BCF78
+:10FB90007E00E420F26B097BFC0FD59A23BC0E702B
+:10FBA00083F7FFC5C7EDE97913FE50ED33939D242C
+:10FBB000ECF9981AB2D7D1C708ED7B263C58ED83F3
+:10FBC000FAFDD991E7ED98CCE7BDFF65EF70D467FA
+:10FBD00083FB017F06453ADF003395D2B859189769
+:10FBE0000AAEB62D88F41D9B33629F5BA1CD3628EB
+:10FBF000A4C76EAD36EAA97EE2579F349C7C81D2C1
+:10FC0000B4817F94003D24B2C8FCF2FCFAAA3B0DFB
+:10FC1000F5CE96D5CA7AE41F2DA0AF625C30D569C7
+:10FC2000257DB535F187D3F15C3E69604EBCEFBAF6
+:10FC300013D43EE45FE857C57BACB39B389FF13AE1
+:10FC4000B99F15EC38CFA5888FE966C247A9BF9A3E
+:10FC5000AB39FFB9D8C6F3917B121DE4374D6CE286
+:10FC6000F9C7713ED067717F3378FEB006FF211F60
+:10FC700092FAAD23DFACCB23B61AF28CCD86BCE270
+:10FC80008D13F47C28BEA47840BDEA5760FFE23AA9
+:10FC90000F00FFC13200763096CF83DD8EE56FC056
+:10FCA0006EC7B8C18B6BF3A87C69AD9B9EBFB2B623
+:10FCB00094CA6959418A2B921F999C8F2CA0901F3E
+:10FCC0004FE2D71BC3CA10DFA7F3F65F4EAC7EC06E
+:10FCD000370CDA9365FFB1847F7D755F750DF6AFE4
+:10FCE0004DE3F551CF5E5D83FE9FDE99DA4313004D
+:10FCF000EF524C9EBA36ECFB239B3B927D5F30511A
+:10FD0000DE138B6CBF33FC4482DE9FF314F1892831
+:10FD1000FE9CBB15BE8E3F4E7AF05EA48B41F3CCA9
+:10FD20001EC4E3AC1CBD9F7FF044CE77168B32EB34
+:10FD300015A08F01E02EE9235A7BCB7E4081087409
+:10FD400025CBADF16C2ADDCFAEB12E8894E774409F
+:10FD5000D055D4F11DCC651B1BA2B7168791DE824E
+:10FD600014DFFDA4E9C683282FBF39BD31B20F834C
+:10FD7000351AC9EB20D01BF273B581D39B6AE6F725
+:10FD8000336B0F73FFC84EA42FCC87437A837FCE8B
+:10FD9000F6F17AAA81DE5A8CF4E6D0D35B10E90D35
+:10FDA000C64BF471FD22AEBAEB5BA5B7CFBF21BD48
+:10FDB000FD7A4A90F21A7AB21BD3113E5BC5F7F076
+:10FDC000BE2A1DDE35D1CABFCF7189467E81561C41
+:10FDD000C741FAFC26FCCECAEC61CDE62480DFDC0C
+:10FDE000E402FA0EC1E48943043D1C71A0BF266100
+:10FDF000BAE69C88F475E57B74BF31C5C4E9B7E009
+:10FE0000D937491E64B675CF9B8D74B75A253969A9
+:10FE1000DC57EB548E6F2D0A9F174E2E3D3CAE37AC
+:10FE200042D0A56B758B62477DBC8EB973B3E9BBBD
+:10FE300032F4BD9B7F69FD4F278EDB3A3589D6E5CD
+:10FE40006A7E33D1CBFD6B6968BFD195E6C2FEF403
+:10FE500008BF2ECB101D3DE74F1CC03F7B3EFEF17F
+:10FE6000C80445F209CA03F68AFB9B322E12959EFE
+:10FE70000D7EDCA8FEC34B387C8CEFC74FE1F3B698
+:10FE800008FFAF51DF93FB3F3ADD3B1BF7A7385E1E
+:10FE9000E47EE003CC85EB9471B3BE3C23A91FFA4A
+:10FEA00098BF05F56D33A83243B8BA81E3F5E51F75
+:10FEB000093D714599773E8EBB83B90EA27C73B81C
+:10FEC00079BEC233D3B50A82E7D7D4034BCBB46B28
+:10FED00006C2AB15B3B54503B5B32F619471A1B894
+:10FEE000D6F47966CE179A14C1071CEBAD50DF9A91
+:10FEF00008FCCC857A3BDFB713F8868BEC0CBD1D74
+:10FF0000310B9D91C837908F1070B5B998579920D3
+:10FF1000C60FC9EBE00BA8970601B6774053828F56
+:10FF2000CBEB96C39CAF5881AF505CBA94DB09F21F
+:10FF30005E505CBE9BEC2F551BD87E301BECFBE665
+:10FF40008922EFBD901523DCB24CAE3B27C0F3A253
+:10FF50007B661E9D008F4BEE5B3A18C5E9F81D6D60
+:10FF600015F8BDAF150F9FD9817ED209FF6E63E2F0
+:10FF7000BB6A9467F0779433742E07269FE1FA6387
+:10FF800076643CBE620A977F32CE3A001EFB098F30
+:10FF9000459CF32BE0B1E33C78FC58143CDEF30DB8
+:10FFA000F178EF44D8D7357808304ECC6CED17583F
+:10FFB0008F86B7B36669CF0ED41E163FE0F943AC07
+:10FFC00081EC6719BF34AEA70DE56BEE007EA90D7D
+:10FFD0003B63D09E6D69D8F9327EF7B1A589DBD934
+:10FFE0003DF16E7B29DA376FA8F43DAB68EFA3DDF6
+:10FFF000ED036639730ACF8F3EB4DA169806E364D0
+:020000023000CC
+:1000000038B8BCCD70680CF3C5CDCEA0C51B8FFA37
+:100010009A87A19D614D36315F983F66ACE508C96E
+:10002000E51E90E3481F409F9CDE12F938523E4F78
+:100030005B7D274672D8945E90836174F2F2FE5223
+:10004000F2C3C597EC5D85EFA9355617E2F7B4CF3B
+:10005000416E86CD331D3491F0FAA5F674DD383348
+:100060009DD9BAF6D969DFD1B55F06F862A53836F1
+:10007000BF1728F59A39AE025DBF4411E7F86EDE6E
+:1000800004DD7866F5CB3BC623FD0B3D6232FC8771
+:10009000F4AF1AF405A33E61D41FD824FD3DD53139
+:1000A00066918766E6F9115B999DBE4B017C90BE17
+:1000B0007B501BCA13203A19630DEEBC0DFD2A0BB1
+:1000C000ED6E1F3C6BDD7F595A5D71C87FB6B589F7
+:1000D000FBFD5AF6D977203D6C177429E92B3FFEBA
+:1000E000E4424672DDCA501E1BE955E63B497F815A
+:1000F000F427280DDCCFF0D4D46CA207C97FB65604
+:1001000073FBF7674A204619C1E9D29514FA3E5DA0
+:100110001A537C73387D6B49A254453EAACC7BC5EB
+:1001200071D0CE4EE3F3B19778DE64F38FF17D2783
+:10013000F30D13FE8CCCA4909F02F31356F2F77CC0
+:1001400073C47BC345BEE520BEFEC04C31DF18281A
+:10015000D5464DF8A7BD54DA301E0E658EE28E45A9
+:10016000FFC708D543819604115FCF10F1F43825FD
+:10017000C099C7D7E42363818D625E024BE2DF172B
+:10018000297BCCC154A20FEB4E9447B79E70BF8E13
+:10019000A9BAADF13F7C751A3C6F7F4375A39FF4FC
+:1001A000D64CDFDB48D76640061FF9B53C75786E44
+:1001B0006AA5DD391BDE537D3B9A31BE3BD6EA3F53
+:1001C00048E7B9CE46F41E84F7101FB6C7039D2238
+:1001D000BEA2A76B5C281F48C6318213DC7694A3AD
+:1001E00041ECC7FDCD3AFF67847C13F2979A45BD79
+:1001F000D5B193F4F7F5C956FCE226E6F76435214C
+:100200005EA6C4F2FBB78CC70D86E33FC2F2EDAD2C
+:10021000CEC87E4DD0D7080EC1E6E56903E95D5131
+:10022000E3280E53C09A70E17194B66BAFF407C225
+:10023000D629F7BDDEB15359CCBECAFC4C1F476965
+:10024000605ACC98087194A05FC1750E6FE07196EA
+:10025000E1C25FFF75E3285953BF5E1C45EEF7729C
+:10026000F1EFB980D8E29E31C513E8BC4CA1F58509
+:10027000C1EF21E247841B0245A0FE3D517F754F2F
+:10028000F79F1E857F1EDEFDFC1E2CA51E374FB47A
+:100290005F31FAB30398BB356FC32A11C7D2C71FAA
+:1002A0002E07AB2EDCCF8FDF0B08AFCF33ACA7CC44
+:1002B000AC8F13CC70E8FBCF4AD6B7970FB3F53BA2
+:1002C00037F4CBD37E95FEFBBD35EE76C6BF371532
+:1002D000760EEAF9EB76CC9BC3B88FAB3F9E84C712
+:1002E000013CBF34B3A462C41713E9A5DB7DCBEF97
+:1002F000AA02FA590F7294F362978EFE42718F72BE
+:100300000DF149FAFBA3D1D349470EF9FF87371DF9
+:10031000EC9A3198F5C5016E8FF5BE3109BF17E42F
+:1003200038A7A01E32BCE937D47EE5C29201F1287D
+:10033000B7E950D78CB0EF08E69A3D26B49F739B7F
+:100340005EA4E751F5F9FE7C84F2D672055EC8BC66
+:10035000C0ED98170870CF6D10DF07EE1C38FF4D09
+:10036000CAC3D6B0FC3E4A6670292C7C7C29F7FAB9
+:10037000F9D319F7FBCAF9FAF2020DF3F6C93F27D0
+:10038000977FCF4CF77E312925EC5E86B8C701FBFD
+:100390008E9807CA268B7BB1D1F3D8B8DD59F9D234
+:1003A000DB38FE57B63BA38C3B2D2B18F19ED4A017
+:1003B00089C28F1C13CC44BF418F25B25EFFB39915
+:1003C000B392270F60A761DE2CC232DA3ABF6EDE2D
+:1003D000EC04116F92F156993F2BF362CF973FFBDC
+:1003E0004DFDF065C21F10379951698C4318D73BFA
+:1003F00059F8C7B3CB3C9326D37DAEC8F107D9FFDC
+:10040000ED746B44BFF8FD53059EF4BF7F44F9A122
+:10041000B0DEE4703B48BE27F3F28DE3815D74C526
+:10042000E4307FA0B73997FC7D61F696CC8725FA3A
+:10043000D82AFC107D7460D40B453CC4A817CAF8B8
+:100440008852CDFD13401F350807D4BB302F5DDA2D
+:1004500079329F54E68D625E28C5A3BEA65EF5ADD7
+:10046000DB53CD3329AFABC559F6D237B1A7DAA7E5
+:10047000F27BC2D29EF23AB8DFC18BF6D425FDEDF5
+:10048000A9E2326F2BC2CB68571DFFE987941F0B7F
+:100490007668DBE46F834F18FC53232670FC96725A
+:1004A0005AFAD30E8E34E9FCAEB3D43507295FBCBB
+:1004B00081FB5B32B42EB2D3AC0EAB0BFD2DE61933
+:1004C0009C8E2CF9CCAFF1382FF957645E599263AA
+:1004D00059C4FBA6D24E0C4A3BD1C7EFA7F61CE687
+:1004E00071DB38F4B760C7722ED7A4BFC5922CFC5D
+:1004F0002D867CEC38837FC5E86F7962B2DEDF72CF
+:10050000BFE2BA0D49FDE96D337F87A0F8B77B974D
+:10051000C6A1A9FF8CBFEDBBC2DF728F03D6B7FFA8
+:100520006DBDBFC518FF8A10F722E7D599034F901C
+:10053000DF44C257D2ADF4676534F1EF37CD52F7DF
+:1005400028C85FB63A387C55F4672587FC59CA132A
+:100550007FEAF34BD17DDC7E71F2C697719D6660B8
+:10056000381B23F9B7045C8DF1A88426710FF85B62
+:10057000F267BD63806FE13D4577E2778D8BEFAB2E
+:10058000388AE5B81D370EBE1ACAD287EFACC0F262
+:10059000BF5E0E66A3DE69F463BD821F414EE90FA4
+:1005A0005F231C259E7A1B249E3AAC44B7D51C8E33
+:1005B0004638A56A1C4F73014F4145E8C3BF9E44AE
+:1005C0004E9F1933DC2FA17F6D78BE9945C26373AE
+:1005D00013FF5E9684E37601C7A48665E42734E2C0
+:1005E000E9F0CEAF869FEA14E11710F07B6A5BD189
+:1005F0006D08B7BDF756FC0ECB5FF86F8C43B8EDB6
+:100600007BE8CEEF0AF8A5D3F7740DF05B14057EF6
+:10061000D3DCDCBEFEB8CC9B3805E4C265C021D07B
+:100620001FB2B3BDD0AE8F03E9F969EAB7E49F0A00
+:10063000F6F153F65AEE57E0A74F1BFC53A93E4E76
+:1006400037A9BE13449F19409F31E8AF6AE07A246E
+:10065000887D7F9C823637E7AF52AE21CB3181F067
+:10066000D9EEE471E7087ECA007DEFD7C087D1815B
+:10067000138E772057274C4909C9BBED0D3C8E7668
+:10068000E34CCF2484AB8CAB3D335D9B3C85EE2F9C
+:100690007C6DFFE30C9C47FA1F014F69FF2AE03B8A
+:1006A0007EDFFC52902768FF9B1B8216942BB54D72
+:1006B00037285E28DF9EC8CF3F35CDCB30CEDADF7E
+:1006C0005F178C47BD7DDAC83E7CA808C787B1ABF1
+:1006D0003FB913FD5CD1F021234ABED2F9F1A14C00
+:1006E000275FB7F6E143E38651C9178E0F478DF8B0
+:1006F00020E83FB521780FD2AF59E083D9097C0CAF
+:10070000E0A1221EE487E29E921E8222FFC0089F83
+:10071000A06F44943C84554AE900EBBBE0FC031114
+:100720000F6D11F1506F13CF97ED596D9BA5CF3F12
+:1007300070D3BA673B1A95F03CFE0879B2B7E1F97D
+:10074000C938A78C6B7E5CE6D98CCFA7E5F1730E18
+:10075000468F3305F07E2BA09FD380E777139ECB87
+:10076000FB07428FBB71A6B6159F8FB1FA29CF192F
+:10077000F4BD7BB1BE7DFFA3FC7BBBC20F29F3F2AE
+:10078000BEB1DF2CC1EAC7FB92D26FB635DEBA1319
+:10079000CFBB8E0567D2777E314E817EA7CD36CA1C
+:1007A0006BAC57C0F046BE78A9B76B0AE94D1ECABC
+:1007B000C7F556DA9DA8E7B726CE4A43BE51BB5EC1
+:1007C00025B91ECDBE91F4560BFC86E8AD89F39B8E
+:1007D00054C02FC2379F42FC2603F80DE73F1A434F
+:1007E000BDCE8C74E7E8CF6FB60E00FF0BE43B2F55
+:1007F000E17946E03BAFE03EC3F8CEEFA67C83B89C
+:10080000C7A553188FE788FD633C80F68FF415BEAB
+:100810007FA33EDBB76F3D7D49BAFB5F40679F23F7
+:100820005C23D0D9FFF98674A64E8D4C67E6A97A71
+:100830003A8B99FA8F496799534BCE4F675D02AF58
+:1008400064FEB6D42B2E52BBCEE5E2FCFF8FF3B78D
+:100850006F9FC4FDA9E7CBDFC6DF85F84F8DF9DCBC
+:10086000FFF4A7FEAFF5A7FE78EAB7E04FFDF74922
+:100870002ED2DB8C7ED5BDE3B5B6A903C495259FEA
+:10088000364B3E0DFC18796F2DF033E4CFA9D5BD62
+:100890007F7E86DB9BEE3817F91BEEC0F566087E7F
+:1008A0006DE4CBA077DE39F5EFE86FF87BF90DCB7F
+:1008B000265FD87DFBB2C92EE1778D7CEFBE45D88F
+:1008C000F72D3006DED3DBBEDAEA6F8505A78BF3A2
+:1008D00019D370E5654864AFAFB0C60607B09BE4B6
+:1008E000DF91E858EB7DEE746EF8FE5844B9D5B749
+:1008F0003F839E1C6E37B9BE82DD94324DEF873246
+:1009000037703BD70CF28EE2FA5A6900F975864FC0
+:10091000E9C2D4606F72A3827230B5C143F9F05F4F
+:1009200035AE6FC4A36871FE6F3BAE6FCC1BF8474A
+:1009300089F3FFF754FD772D659C5FFA5F8D71F9A0
+:1009400031D68E7292AF3526FC0B18AC75FF073B83
+:100950006FC3F35E68A77B1AC67C806871FB314960
+:10096000D6605C4EF4F8BDF417DC6F697C19EDF0CD
+:10097000FB9B4D74BEC6BC81FC789E3FFED4AF3657
+:10098000DD47F93F521FAE167CA649B1D2771DABA9
+:10099000FDC467BCDAEE668C27A73A5817EA5947B8
+:1009A000A7727A51D334E233E66A2FE1958C4FD4A3
+:1009B00066F17B733102BFD4918DAFE2F889475461
+:1009C00037C6B7376357E019F1282B518F9860A2CB
+:1009D000BC884EA591FC1E1D8A8BFEFE4762BE930D
+:1009E000F4A3C713DDBF5F80EB4FE17FA7E4D09C8A
+:1009F0006569C807D73737A7E1FDC4E2693C1FF135
+:100A00008E39676B288E9E07FA9F42A5EEEFD9CAF2
+:100A100072A7A688BFB7E4A77C4458F7367A6FA4BC
+:100A200095FC6CAA76F78DC807D451B308AF3B1478
+:100A3000E7C2C5785EB956D2635A73C72D5802FB18
+:100A4000DA90E229CFC6734D1C49FB6C4D1C928095
+:100A5000FAE886F41C9ABF5DF19667E37BE926A26B
+:100A60006B55C4E737E42E7B09FF0E484B8689E1BE
+:100A7000BD83CEDCB3EDD8AF7302FF2338C6F5AA31
+:100A80004EFD3D29FCF011F26F358DC7C55511178C
+:100A9000570D71E5324D917F6783E20E31826FD53C
+:100AA000E6AE5B40DF4F70589D88642DF1C12AC2CD
+:100AB0008FD51686713A66EED0E969B7ADD57FFF5E
+:100AC000C591AF5F4F7BDFFD846C2FF219FA1BB02D
+:100AD000942F9EE845FC407ECB93FEE2783D46D4C1
+:100AE0000316AF2FC2F9FCB3FC67F9CFF29FE5FF05
+:100AF000EFE5FF00834DEAE8008000000000000001
+:100B00001F8B080000000000000BC55B0D741CD596
+:100B100075BEB3333BBB2BADA459FDD82B90CDC8CC
+:100B200096880C421E0BCB488D8D66A595B4322E4F
+:100B3000D938FC98C476D6D8B8E43427559D26B168
+:100B4000135AADAD95254BB62C09829C43CFE9DAFB
+:100B500024396DF00125E9690C01CE1A1C420834D4
+:100B60000A10427A92208CE39496E698828968690A
+:100B7000E9BDF7CD6877462BFFC53D1187F3FC66CD
+:100B8000DEDCF7DEFD7BDFBDF72D0078600180EC59
+:100B900007001D6073912709E500676B200DD5D80C
+:100BA000F74E576841800FE9AF35DB0EF702647CE2
+:100BB000D97EB05E05B30EF8EF43D1B8E88E9B1630
+:100BC0005DF863D21DAC5537A48373E9DAE3DA4CE0
+:100BD00009A029EF3C205DD43CA77FA6E3F8E4CF31
+:100BE00064A8D5E7CEE7FEDEFE6E73D1FA12A8FF49
+:100BF000FF1B3F1F5F979A1E800AD18755B86F6A07
+:100C00009788AE8E7C5040F0A1AF73553A83FF9C1D
+:100C1000901283D5B4BF90C7F806CCE583DDCADA5D
+:100C20001CF965E9CB827CB94D1F9720EF0C9881A8
+:100C3000627A85DF21EF355CF6872812A5DCC3CF09
+:100C4000C1A2170678E6435CDFD1ACBC405B90A53F
+:100C50002B6F5479FC72B5E785A695F8EC15D9F899
+:100C6000869EA5CBEBA9069E00ECEFAAB3EF156B11
+:100C7000DE8F1C5221638FC7FF8F9921E6D3C4A654
+:100C8000FB2181FCFDF9C64F9424F2E881DD2E4B57
+:100C90003BBF7F036902F30DD2DFC07FA77E312AFD
+:100CA000F1E4C7C4F3D40A2D3D84CF87A4F4D03532
+:100CB00034EE2EC15F5B0E85961CF02F5C837CF4B6
+:100CC0005A72F2BAF7857FCA02E693C59C1C392C8A
+:100CD000611A35B4EF3E9B9E6E6400F934BCBC6172
+:100CE000C5904EFB1FFD876FE13A0E1DDDF3E6B7A1
+:100CF000F075A0BE61A419D75360780C99F4F9532C
+:100D0000C78EA1B860A0FE0BA34476DBA8646AF886
+:100D1000DEAF058FC8B447BF64123DE5E042DE4F49
+:100D2000789B530F2624634125ED6F4C02924BA113
+:100D3000E17CEFD373F683FF1F2239B37EE63C4795
+:100D4000BE21F7364CD6CFE5FB2B963E2B383E69BD
+:100D5000D345BE8C7BF59B89CFE3FB644822C9F168
+:100D60005D68145700FC5BE6BE4FEF46DBFE42BFFA
+:100D700097E5301151D3128E9F28D26EDB40FD0AC9
+:100D80008F7184998AFFE3BE46975DCDFBB2E76B16
+:100D90006AD579BEB1C8824AB2471C5719BF6EAE38
+:100DA000FEB9D77FB1FA77B7596AE9FB28107D9869
+:100DB000BCD943F6E4B7C65C234F362EA1F97E2E8C
+:100DC00083D09B1E8817CDE54F3FF9838F64F54490
+:100DD000B5F4686FF9FA9F10F9F9F4594D4F99D5A8
+:100DE0000D340FF410DF97859DEBB3C77DCE92973E
+:100DF0002F0D196F31B519131AA89D32256CCF6EBE
+:100E0000FCBCB6569F7F1E1FE4D0AD267AC0FBF611
+:100E100042829945723573E4BAA7B0E10E924BFF56
+:100E20004D2AB0FEB9F97C9EBEAA648E4BC5A40FB4
+:100E30001F61FD48A27ED4221D6FD8A987F12756D5
+:100E4000C27450C829C9CF6326C96959AB77D67F08
+:100E5000FA73FC25E8BB7F2323BD7B63AA3E84EBAA
+:100E6000BC37BEFDABB7929D3F2F1B12BFD7D91F1A
+:100E70007EC19A034627581F4AAC7367E7B17B5E71
+:100E80007B8E6414535F27BE911DCFF245F867D364
+:100E9000BF2A3BDFC1E693834B910FA9C1FCF4EF5E
+:100EA0002CD33F47FCB3F93C1FDD59FFBDF3F86479
+:100EB000F4FA6C7FA4201188A01C4682063A017ABD
+:100EC0007F82DFC34AD4CBCAF9E5891C65FEBC46E4
+:100ED000FFC471DD51538B605F3E864B5F8E7EB1E8
+:100EE00048BF793DBEEA287F7D13F17F5BD0A3C95F
+:100EF00039F6D5B7DF0B99203102E745BD5B07D343
+:100F00009BD6E338A8F1B29ECBE52BF8F9D6A2B870
+:100F1000E2C1F6EAC8129ECFFEBE1BEE5376E0F3A6
+:100F2000E55EED15D29354B9442BC2E7C8405CFA94
+:100F30005A05CC626CBBF4889FCEB5D8E33411401F
+:100F40006B68BC9CCEA586C70E5525C8AE93E654EB
+:100F50001DCA276489EB5ADF54BC1DE9F5BD201B6F
+:100F60007BB01F0A6E5F07A847D22341F6137DE8C6
+:100F7000E77D287725D8F9263D5F7306209AA34F91
+:100F8000AD337E88E6F8BD0852CEEDB7FB2B1DE3EE
+:100F90003BB46AC77B194C23837CEA0A2F738C2BE2
+:100FA0006A5AA9D17ABBF5158EE737D5B538BE8711
+:100FB000A872721AFBABF13F92BB0CA2CFEFAB0948
+:100FC00027603FE77B0572FAF87E6DA4A8FC341D0C
+:100FD0004A37C00D6447289723C3E47F36F8F9DC0D
+:100FE000EAF3C231A904C8F493D048CC36F9BC97CF
+:100FF0002C7D4D46AA594E52F099F7590F1F9FF676
+:1010000010CE82C7A091FCEBDF6AFA710F0EB99285
+:1010100048E2F76154741DE584AE3A1968E4E7E6E6
+:10102000D2523AE7A46437F617E1B8B05045789643
+:10103000C6F961F757C4385844E3344856615F3302
+:10104000A080E45A85743E5BCADF25BBADEFAE12CB
+:10105000DF254B4A05FD86463E47331DD81E060355
+:101060007CEC7FE2089AC88BF4707B15AD0A9F3F39
+:10107000084623F56B619AFD148A5FA2FE4298D45C
+:101080008493CF08BF3DAD844EFB85DFCF672F59DA
+:10109000BB51E0B42D0F1C7C55ABF925B2BFDBEE84
+:1010A000683A27EE50763EEDB0DBEF4474711EEEE9
+:1010B000EC623B51763EC3EF5F8AC4F7901D12EBA2
+:1010C000FD8D73F9DDA06680FC572A02461249A403
+:1010D0001E5D1BDE82F24D3EEA376AE1F2C9E36231
+:1010E000E59006AD80F82AF75CAA1C80CFF9E031C4
+:1010F000FFE121564693CFC93F402EDFBA14B9B85D
+:10110000E501F79401B49CDF8F3E206502D252E6E0
+:1011100087196ECCF21FFBC96516BF4A2D79C8A28C
+:10112000CDC8D673A5747EB910BDB2D2AC7CCE2723
+:1011300097701CDF3766E523F798CC3CFB9CF6C123
+:1011400019C6B74B2483E5B5548E7BA85F28652C60
+:10115000D093E673BD183496CF15D0C36DB9777AA6
+:101160000BE3E19D3811E1D90FF094CD89C752C14D
+:10117000367F35F9D73AC5F060BFBEC8134F231F7D
+:10118000AF542043FBAB542049FE1C9101D34F3D8B
+:101190008AA7159E33293CA63DF4DD2E7F3A2565AE
+:1011A000E76FB0FCF64F8ABEA94DD767F97C92FC79
+:1011B000D772C10F0FFB9FC90C7D1F8E81D1A7CFA6
+:1011C000F567382E295B7E8ADACDF4A285F9962C54
+:1011D000C6BE34F8C3F70967103D05FBDF8B24DE7C
+:1011E00021BD219C1E2C65BF345D48C07A2E2E3057
+:1011F00009576CB1E6D970A3BE388EEBDC32E87BC0
+:101200009DE841CAE7C405EEEF750972BFB7BF9B01
+:10121000D52BF7F7976807B0B3E2827040E491D519
+:1012200025D37970FB2CCE243B29CBFD4EC8492D0C
+:101230004F30EE50C95ECACE4FC7EBC22F361D2FBE
+:101240002A2ED1F15AF8C53EA7B6C319AFB2D45A67
+:1012500027F26B2BD87FE5CCCFCD16FF3E4DE7555F
+:1012600031F1130315DCF73688ABA4B77F86109AEB
+:1012700070FC927DDB8A192F405423FE48998FCA57
+:101280001F5E7B117CB4F8B439F3A65727BFB4B303
+:1012900008DEC88DDFACF7EF6CFC8488D3FDFE1A46
+:1012A0007F4E7C5878EC835E72EA7B0AFFE68556B7
+:1012B0005C7AFF4BB22157D37B819B0320CEEF4258
+:1012C000B2535C77E1E3A7FF87C617BA7035518642
+:1012D0001CBA9EC2FD8C670B8B559D71B64BCF6CB3
+:1012E0001C0D1F081C1CB4B897435722BC6CC73D8B
+:1012F0004C579A3BEF75163EC757910F2F00CFBB47
+:10130000713ACCE273F13E1854859D609C9971C48A
+:10131000C17A5E3BB3D76D7F57A1C6AB8DFA3CDF78
+:101320005B72A8A7401CFDC2C22A48EFC6F50E0E8C
+:10133000EE8814627FAC02748C3061A0F38B12E1F2
+:101340008DB672A14AA166810B690AB0E378FC0BE5
+:10135000FDAB3E5487EFB757050D5C192C7C0B7124
+:1013600032D2B9ABCA6F98F82005E27DB2D923E238
+:10137000C924BC4C78749B251FEFE30267B26CD084
+:101380000EF7B7097CB5EDD867D7917C474A6F3126
+:1013900032386E1BFAA732C263A35EC67388EB1C99
+:1013A000B8DFD79C8303F1FFBB0E791D7DAF0B2700
+:1013B0000EB7210E44FDB671E0FD6DC07646EBA27E
+:1013C000F3E472CD03C172F6A7D729539E7CF93797
+:1013D0005B1E36FE7EA242F0D9FBAEE00B06CC3B94
+:1013E000E8B9EF5D118FA1030F362DA0D35FF0CFC9
+:1013F000D784FCA1A7EF8AF300BFE4759BF81FAD6B
+:10140000DB8D877D2E3CEC5EAF2D87476CFEAC827A
+:1014100055C41FC4E78C13ECFDB8F7F138C6E7518B
+:10142000548A277BFDDC667A356E9FEA0D737BA2BA
+:1014300057872802B0677AEBB87DB6D7E0E7CFF5DB
+:1014400036736BF3612E7F445EF32A6BCD4AFD54F5
+:101450009CCED12BA21E3685B17B3CCCB7B3A89FC6
+:10146000647CC506E5DE707CCC93A690DE8E7F168C
+:101470005AFA7AADEFCC711F8E1FA904630F7EBF9D
+:10148000B0793BEBD99A339EAC9D00C539058E3CB3
+:101490004104CA1CFD76FF958EF11DDA52C7FBD2BE
+:1014A000C834FBA9AEF0B58E71B69CFF8EE22C5C01
+:1014B000DF58F4A4467CEDD6AF778C53EE41F93774
+:1014C00050FCF351075D90D719E4A74B373AF5B0BC
+:1014D000D82557F5EE73C741B69CDF6A73C643F350
+:1014E000C9D7ADAF365F4B67F92AE2CA14C595C8B4
+:1014F000D7524DF0D5DEEF88B55F7B5EA559ECEF96
+:1015000072C797C5145F56E78B2F4F597C3E4F7CAF
+:101510001973C6976EBE9E2FBE5CD0EEF42B17CA11
+:10152000CFCD8B45DEADF47999E31639D6C3E760AC
+:10153000D9946C74914BB4705911F9001CB7B94926
+:101540004D13CE1C83E9309DE70725E42AEA5B5959
+:10155000BD51497EE6E190F1CA06C28DDD220FF849
+:1015600074E4B630E18EFEDD87C37858414BBB870B
+:10157000FDDD68E434E72F141D387F81AD99CE83FB
+:101580004FECF176BEF1E026352DE1F88356BEF141
+:1015900060F76CBE91EB1B134D22DFF827EDBA9577
+:1015A000FF4B86295EB977D3AA4A3EAC14EC5F475D
+:1015B000C30DB693A180564C71746A9347A37DC93D
+:1015C0002BEFFF3CE9C701A9675F0DC56F151ECE64
+:1015D000BBA642AB2AB7E0387933C218EA6F5AF596
+:1015E0002AF9EC890A7D5F0D7D1FAA61FEF5AFBE69
+:1015F000CD4FF38C841674537E64A4C3C332920916
+:101600006714339DBA73C53DEE3A804C1E97E2B71E
+:10161000724F46A5F38AF0474EDEDF96FF5048E54D
+:10162000FCECD6F6870E276BF831FBAF85765D664E
+:10163000531BE799CF129E90E6AFCBECB5F29DB36A
+:10164000E74ED8B99E3CF3302EB0EB12F4A7DB790D
+:101650005AFC4BDDDC99A673741CE231F29FC9E0A1
+:10166000B9EB204AF0DC7590F9EA1EBBDA451EF5AD
+:10167000CB2477915F74D44B94985517B1E2D783FC
+:10168000940F277D70D549EC75F459F452B37AE480
+:10169000AA9BAC562D7A06E4CB5FFFA1F593FBDB4A
+:1016A00045BDE662EB26DF6D07B15E2BDFEDB5E4ED
+:1016B0007F8D3CB983F4F18F9DEFFE6EFBE5CD7716
+:1016C000CFAD13A5D95EE0D89937D8AE972DB0F03D
+:1016D000CBB9EB404304F4517EE32B109752FDC38A
+:1016E000EA27AF1374DD75A1809547F951FB5211BC
+:1016F0006F913F21E12AC662E26B50F97652C37DB9
+:101700001404C72084ADAF7C4B92DAD6C53AD78794
+:10171000C69779F8BC1A2F4A1CEEA7F52F0BE6B531
+:101720008B572DFF3768D56F48813D646F926D1CD4
+:1017300090F0A09C2640C8F9ADF6108F57B4D1E6C2
+:101740003B516F4E913E54F07EF2D67F4EB78BFAEE
+:101750004F0EFDAF939EA62CE244670BD2F90F4BC0
+:101760001F810E8E0514EC88F9FCFA6833E182DFE4
+:10177000B56BE2BDB2C2207B180FE59FEF77D67E36
+:10178000805231ABB2F868E1464107FCE2FB83D2FC
+:10179000990D2757B25CD99E681DF4DE5DFF72D3A8
+:1017A0000FD439E31BB5CA39FE83D97D38E3A203D0
+:1017B000F3D4C7164585BEB62E167A46FAB1278FE2
+:1017C0007EB8ED5DA5BC27C553D190359FF03B4158
+:1017D00065AA8DE29D603D185C53548EF37EE34F05
+:1017E000D41C9B5E497EBED8A03848F1A3AB6CCC1C
+:1017F000C689EE7D9F2FCE5314487A1BE7C67B48DF
+:10180000D72C6914E74C3287DE5551A127726E3C04
+:10181000584DE1887E33D7F1A80E48FD5DBE0DF925
+:10182000CEE9DA76EFAC9FCC57D73914C73882822D
+:10183000D447F6EFDB8AFD77348FE6E3317ADEBA00
+:101840008E66F567EB3AF10BABEB8C464BBB6B2E20
+:10185000A6AE330FDDD9F3786E5D271AC57D8E05F0
+:10186000457D65B6AE734BF905E573C03A974B2DD0
+:10187000BF5CD46DC5113B258E239E6AFAEDF072D4
+:10188000D2B3262FEB01EC9F805C3B59B751FF5A36
+:10189000199D33AFFAA056F83593E8D971B1CD3F11
+:1018A000D5A2DFF6D0F30A8D1FAFF4AC627A90F1C7
+:1018B00079B8D89D54AD56A676B99A914B886E29C1
+:1018C0005875F48C44CF23C8ACDCF86064E6C5F6E8
+:1018D00012CA9304C120173412D17697D03FA80AB8
+:1018E0004478A75A4F93BF6DF7173AFCFF48B72AC1
+:1018F000FC6BADB82F337E5CFFDA361C3FB033C0D3
+:10190000B8E9409547D85752E27A7287E68C7BC691
+:101910002797083CB6DF6BD03D91A39362FCD6C8F5
+:10192000AAB4CCB8DB191775EBCEB8686B65E32B9E
+:101930008417A1DFCBF978CDC2B537D539E3A4A29E
+:10194000EA9E6709A76CEE1778786FB874C156F4F1
+:101950007FBF8AEA8E38714BFF5D5C37EA5781EBB7
+:10196000A9239B54B68F11EFEB87B6326E2C603EE5
+:101970004E6C522B1339F652D6E1B3EE4508FC817A
+:10198000F0323199E77D5987F03BA8D87C8EDBFA9D
+:10199000F2A79F117C2EAE82B44E38AE7B4786E212
+:1019A000CAF12ADC13BEEF0FD7741FA7F95F968127
+:1019B000F6E9D6C3EA8E5AB6D3D9F3B4D9E3E093A5
+:1019C000D717EF21FA7013E8E4D7A231EC531E6069
+:1019D000A30A941FF085FF8AF75B8AFD00F6FDB12C
+:1019E000D1A4827D7F4DE27AC2C54FEFBA7D3052DD
+:1019F0004EE79DB06FDFC6EDF14FD0F8955E08D091
+:101A0000FA4097C2B4BEA4B8CFE0B687BDA91F44C0
+:101A1000494E7B0D8945B4B97BFDDD7C6FA9BC8047
+:101A200071D3A837BE85FDD1AD7E2DC967E034C71F
+:101A300011DEAFF880F46E62D76F2A087FFF382A74
+:101A4000EA9A01DD195FFB6194CFEDD5E6D446FA41
+:101A50006E75B34A150F78AAE534CB6DA2C967F845
+:101A6000701D132D12F3F9BD266F9AE679529D92DF
+:101A700069DE27DFC3B9ABF3D9777EBBB2EDC83DD2
+:101A80007EA479BD9FF4622F4CDD42FC49CE883C98
+:101A9000957B5CBC439C577B53B7D6299CCF52B9EE
+:101AA000DEAE9C31CC12A41E9A89FF3DE55E9351B7
+:101AB00045C449959EA484F406BAC5BD8C81A2C4D0
+:101AC00020E9F300EA3DC749E5E23ED27865B93145
+:101AD0009433DF78CB6D75E4CF5E680A30BEEF3BA0
+:101AE000F1177712BE6F93DFFAEE23145755A92C26
+:101AF000CF016FCFAB1407259B02BCDE138B54F0D4
+:101B0000933F28BFF3418AB3E1E846C8D5D7899807
+:101B1000B0D3892A61F7D2231B390E189764E6B334
+:101B2000597144223CE68BD9792791678A58EE6C2B
+:101B300062E377380F7545B7C8A3466256BE490EB3
+:101B400026592F6F083C48F66F2A5E477CBCE68C0E
+:101B5000335EBEC2152FBBF351FF1BB5F21156DE2B
+:101B6000C9D6CB626BCC44B3E5A757FAD2420F7B00
+:101B70002AB5FAB9F6FDCF167E9EEAF5F33DB21707
+:101B80007B35EE179B6FEF2E433A2FF786F9F9C797
+:101B9000561F9672BF1B5979AB5F677F321D26BAFD
+:101BA0006E3FE2D68BA16881E33CB1D759D4D226EF
+:101BB000EEDF9D618F0C6B82D3ED7C36C254301703
+:101BC000EF677AC53DB7A7AC759EA075FA284F267A
+:101BD000D6F76CAFCEED73BD75DC6EEA00510FB079
+:101BE000FDC355E81F900FD12AD1277F40F22F2D3A
+:101BF000BF93F364BEB0A291BDFBAB4633528E7F60
+:101C00009828EAF9C55DE4F72B82AC8FEE7DADE94B
+:101C1000F0E4DDD7E6961DEC77CEE23CC47FF433EA
+:101C200077B31F42BFC0F36E54EFE07598E897D8C2
+:101C30002FF47CED76F60B5E203D77FB81D2A4B0CD
+:101C4000EF842EF277F63DA159BF80F3A4719EA7D1
+:101C5000D0AF537F00FD00CD33D0F2FA9FD3BCEF5D
+:101C6000BD5FC0F7A22636BDC27EE185B3E8B32FC3
+:101C7000A35FB0EDF0B5139123B9F17C56CEEB6FB5
+:101C80003F26F8A181E0EB86789E38F162E50CE60C
+:101C900085E198B4327D87A83BAACC8779EB8E4941
+:101CA0008F416981BE492566D51D81EA8E76FD3159
+:101CB000A7EE58E0AC3BAAE914E39BB45577BC6DA2
+:101CC000ADA83BAA05D3C1EC3AEC7A633F3DAACC60
+:101CD000D6E7EFEC48ECEA68CAD6197549D4C15F7B
+:101CE0008A985FA6E7505ECAE7BFBB4E69D723114B
+:101CF000DE49899CFA66033EF79766EB5FEE7AA6AB
+:101D00007D2FA3419D3E328C7CE9BBC3CFF8C15EE1
+:101D10005FDFA37FF26AA23C7B1FC0AE77DAF54C8F
+:101D2000BBEE89EB1ECB5D373C0EEC77E031FF61FB
+:101D30003ADFDCEBFD5E24717F47459E755F607D79
+:101D4000711D58F41177913DBF66F1D11EF7906572
+:101D50008FCB5591DF866295E39DB687822013CEA7
+:101D60002E528F905D6C81E90EE26F5F48E0BCD42B
+:101D7000012FFBC9A31D3ACBAF4235F93E44C597AD
+:101D800003C66E24933AAE1553FEA93B6A1EEDE0DE
+:101D9000758CDEB29ED681B89DFCDDAF6BBF5ACE8E
+:101DA000F57EBAF75442F19FB198F220CF77E4BFA5
+:101DB000AFD4BAF8CC7A9EB7C803149FA502C6B3B5
+:101DC0007CAFF80985E9752309B391EF2F45D5520A
+:101DD000A223EEA7F6054FB2BC5A6B7D2B38AF5746
+:101DE000943F0E7CA643C4AD6B91968A743ED39605
+:101DF000F801AD9B72A561D66311DF3D4F7E52F8AD
+:101E0000AF7B3CABB279B01239F13C8D87A39242E3
+:101E1000E7A3CFD21B3B4E7CBBCD7C81E48EF2305E
+:101E2000697EFB1E903DFF4B961C921DE68B34EEA7
+:101E3000756B9E062D19213B6C48A03E486C3FAE49
+:101E40003ABCD00BB7BEDAFA365B87B7F450D2444F
+:101E5000BD16F5EA755EEF93FA718F44F5F6C4E1AD
+:101E600061FAF612EBDD57B69B6FD2BA4BDAE2FF9E
+:101E70004E747FBDEB76BE177CA1F7385A17F784F6
+:101E8000A98E3F1010B8F9E188E1F0778B3A857C94
+:101E900016750ABC742DEACC14DF2F35F8DE37C076
+:101EA000DD8CA36DFF34DA9BF8FEA9DAECF7A95EAE
+:101EB00098A47AD07CEBF0EEDBC179DDBEAA363F88
+:101EC000F91FF46F25D41FA832C3B9EB4815093D9B
+:101ED0004F2E12790BCAA72573EE939776CABC9F33
+:101EE000F62AC890EEF882A2EEE643C3D5F1FCF1E3
+:101EF00099CD7CBF189F4F528AE18A4E5DC4E5E5BB
+:101F00000698146F56C581ECDBA765BFA73A6A7BBC
+:101F1000550FDFB79C8F8E1CB6BF4FF0F737766A30
+:101F20004C572DF738F200E7E39B9B2FFDC4B7DA3F
+:101F3000F9F9A65E30DF84DDB9F9B5CAE2D7D3A1DD
+:101F40002FF2FEE08376B6339F86FBC47675A7F04A
+:101F50002F72D0844411F9A8382248CAB3F700D5AB
+:101F6000A16D3ECB9AE0B3ACF5F077BE2A0312D751
+:101F7000115F12CC17371FD04F00F9891F3D7AA887
+:101F80009CF0692BF6C3C27F800FDB073A845C6C40
+:101F90003B5D073F0D8AFCB7F3BC70FB53BB7DD89C
+:101FA000CA3FBB9F4B5D01E13F7470F0BDC8FAFDB5
+:101FB000C291C146C607787E26E95E4C67656D0111
+:101FC000F52F771DD15D3F74D709DDF5C1ACDE98E3
+:101FD0007E5AE73BDAC9E4C7F3E88BDD0E5BF6D641
+:101FE000DFEBCF6B77C368EF24BF8116334975A34E
+:101FF000BDA1E930EBCDF13719172BCFCB06E14B63
+:10200000451172EE5C34CD72EC6A3681EA4DC3BD87
+:102010001BBE9D4BF781B6C4573A514F0AB5499341
+:10202000E8042193A4F3676D99D9930F370D587E77
+:10203000E4EDB6F86EFA8EAEAD93FC4F45CC3DD4D0
+:10204000BF50BF359F3D2936EF2EDA9E4E0A7B6A80
+:10205000DEC1F63452D5C3386BE4A73221A92C8EE9
+:10206000B4EC69A4E534DBBB6D5769DBFF340BBB13
+:10207000A03C029DDFC55526FB8D6F5AF6A4A09D9E
+:10208000903DF92C7B2AD6B2E3293FDE4E7CC6E791
+:102090004AD5347F57DC6CD91FD95390EE0F03E338
+:1020A0008001B43BCA8BB8EDABB5469C9B8FB7257E
+:1020B0001EEE247CB1683DE7E507AAFEB38CF18BE8
+:1020C000A5FF59BCDBC8E7F9D9418F41F6D04000E4
+:1020D000BA316B07F6BE57CFC89041D1AC9991B8D1
+:1020E000BD71A690DBD69900B7E64C19B79199104F
+:1020F000B76D335772DB3E53C96D7406EDE07AB4A9
+:1021000087996A6E3B67AEE5B66B6619B7B199EB16
+:10211000795CF7CC0A6ED7CE7C94DB9B665AC43CC4
+:1021200075625F79EC81CA6097C11E8C2414911D81
+:102130007CE655F6EF9ACA779452A1555C27F229AE
+:10214000D36C0F479A85BFEF0A0A39B9EDE1EDB6B6
+:10215000C4AFF2D9C32CBE554023FEAB60FDB9F02D
+:1021600003E29FDFD0F736EE55C326EB19E293D397
+:1021700024CF4BC509B33873B1CA78D4C699238B21
+:102180001067566771E6408B88CB52077C1CBF6D89
+:1021900095C4FDB22BDB13FFC5F609224F94B8C5D9
+:1021A000AF116E4E853AC341CAEBED9581F20588B9
+:1021B000433EE0752A71719FF502EDF95444F87DB4
+:1021C0007B7C039CF4F45C048EF935FDB3657EBF23
+:1021D000507AA9E7ACB75DF8054DF8855455CF2086
+:1021E000D7A55D7EC13E67911F0EBFB0B4CBF20B89
+:1021F000969D975689F3B294FC02F2675997ED17B2
+:102200009CE7AC62E390988D432CBF1013DF216EE6
+:10221000779CB3286E3FE4E062D4A3E55D79700853
+:102220009FE739E75C5F4D6D847E4B103A03115296
+:10223000CFE2197DAD91E7DC49698D6C07C79576D2
+:10224000C8CDAF5CB49D85EC73C7E473C73DCEB613
+:10225000B781E3DD629FD639741CF76FE6D85B97D0
+:1022600026CE233C7F6EA27DBAEDAD75B19988E78D
+:1022700059E727BB04DEFFF11A0BF722AE34828C3C
+:10228000EFF3E2864F92FC9AC4EF341E43FFD31162
+:102290004BA6149DEDFC9334EFEAE8944C79A01B17
+:1022A0009B475FA69208DAE9A7BA9A2EDD4E9BDB20
+:1022B000AC7ADFCE3271D9D96ACFA7FF362EB2ED14
+:1022C000C03DEEE16A73433E7E3C63F1A36FD0D321
+:1022D0004D17FE6CBD38AE2C65FC93C7DF9AC66502
+:1022E000F1B717863F8EE33948723F07FE18CE27B5
+:1022F000FFF9F0C778D72CFE182339B5D60BFCF1BF
+:102300004C179C33BEB9645C1139C97CBB545CF179
+:1023100050D7B971C5B7BB84DF54B469F61FC597F0
+:10232000882BDC7E02F1C33F317F0C71EEDABF37C0
+:10233000E10B9439E717FA99EFD338C20D7479ECB1
+:1023400048B02D29B11DC49FA0E7A3E612D6A3CBA8
+:10235000650F88137FD895D33F9F5D5CF0B8C94D5A
+:102360009C07B4EB99BF0F1437507E64A75FB45F2E
+:102370002A283E42ED58AFC843EFB7F27E635EE0D5
+:10238000FA41BF54601C91E8BBC569916FEF594E8B
+:1023900079CFDF76D9BF97ECB9817F77037FEDA83E
+:1023A0009BCEBF2E71CF97487DC8F7C1AB34CEA36B
+:1023B0005B7CA174109DD343CBFC8C03873A8E1EAB
+:1023C000BA93F2321D220F860A51FD713A7F11D65F
+:1023D00034E79C0B3228A7293F3F4877DB19746C00
+:1023E00010F7A035F1BE348AF17B6EDDCEB8DBD1BB
+:1023F000072B5F6AFF3EB070CD7ADB4E988E6D275B
+:102400008545939A96E36F067B9DBFFF76B772ED85
+:102410007D71BA9B3C5AEFE1FAC5BE1A2540F5948E
+:102420007D7522CB3E5CE389E5AB8F5F1B931C7906
+:102430006DBBBE5D1011EB9A6FBE01D77A7C7ADC62
+:10244000243D1DD6D371FE1D725DB994CCC93B7B72
+:10245000AD79862423D38ACC1C2A12E785AF2A09BA
+:102460001EC203A1EDD7138FFD553D703A48F737D3
+:1024700092F006B6A1523591CEE38796C7841F1A13
+:10248000F24EC6588ED77938DF8B982A6F9E6C61D2
+:102490004CF8E9E19A23BCBE24F285EA55EE7101BD
+:1024A0006B5C813ACAF58E7DB5DFD4695FFBE807C6
+:1024B0003757A07CBBFFFBC1DD41D2DFBB394F33B7
+:1024C00046F91AF4A705D71C8BB521DDFD372A1A6A
+:1024D000EDA343AEDA4DEB1A8D82C17500975E9481
+:1024E000AC51025C2F353D7C07D4AD2705C554198E
+:1024F000213D9CF20BFD107A16B4F4E68021EA3EF1
+:1025000007A2A27E65CB2FE77D80EAD267A30AC728
+:102510002576FD8A6A3DF970DC7ECB2EFB2DBB440F
+:102520009CCA7587D9F78B337CEEEC6FC984E99C24
+:1025300029D2FC468CE81E75AE6B6FD39403971CB2
+:1025400058F1A2DFBA8CEF5A9FD02FE5A95FB03FB8
+:102550002D52A6F8BC2A5A7D8AFDE97DD67ABA9A10
+:1025600081F759BCD2F2DB713322E8FDA5C30F48D5
+:10257000D7BC6A7AE95CB855DC49F0368BBA5D8124
+:102580000A4606F97CA022C8F79ACA565A75BA7547
+:10259000E25E857D2FBC22EEBC1716829CDF0954BB
+:1025A0008B7B59B97D90379EF3FEDBCE5F1E7EEEAE
+:1025B000440EBD2FC59CF7C7CFF7FDEF7BD3CF9D52
+:1025C00040FD1A35CE6D87B6BCEEED6D667ED9FA4C
+:1025D00068EB6788B6D838FFF763A178DEFACC31AC
+:1025E000CB0ECEE7CFCA7CF11EC245F7AD893BF0DA
+:1025F000D103967D3E1013F94F75F119CEAB1DB482
+:10260000EE5F1D0CC086EFE499371353797C56FFBB
+:102610009D38C2D69FB97C380F8E5813B5E2104F43
+:1026200080CEF151A3ED59AA47BEABA93AE4F80117
+:10263000779EDDC61105DD76BEEF3DC65125C12969
+:10264000A1B72B9D71871B070C2BE90D64E7C375A0
+:10265000AAED9FD88F5CFD6CE1D7938C939252EEDC
+:10266000B9B93F7307D30DB9F2EC50EEFCDDCAFEE9
+:1026700018F07A42FA9929BA671E8A29E2DED6A8AA
+:1026800009B9F76EC63CBF9C3965FDFB031B77B0EB
+:102690003EEF9FE2DFD3C0172077FEBD1FDBCCBF2C
+:1026A0002F399FDC67FD7A5875E4DF2ED62EFE2584
+:1026B00066D5B7031020BB380BF770DD1D46638E5F
+:1026C000F3882B100BF8C8167FB84D6595757449C3
+:1026D000597B817651D73F9B98F58B0A7D67589F30
+:1026E00055D2AD0A8AC721C3BF53B4EF959E855F0B
+:1026F000F2BCC9A7246916675D89E13EFDFE712918
+:10270000A99CE6A1D6BDFE2560F0F31A88737B353F
+:10271000F4705B07A3DC5E0393DCD6C314B70D70C3
+:1027200086DB15A0CB34C9F560CAC0573513DCBFB2
+:102730000192DCB640E2FD53B8FEFE8AED2B385E16
+:10274000B4FD87C5279BCF79EC9D71A4CD0F9BEF7E
+:10275000FF48CEFA02EC3915127EB87D6586F53C4D
+:10276000181438D98EAF6D3AF3E1DECB85CF6C5CAF
+:10277000F97FE7ADB141E048000000000000000033
+:1027800000000018000000000000000000000040F1
+:102790000000000000000000000000280000000011
+:1027A0000000000000000010000000000000000019
+:1027B00000000020000000000000000000000010E9
+:1027C0000000000000000000000000080000000001
+:1027D00000000000000000000000000000000000F9
+:1027E00000000000000000000000000000000000E9
+:1027F00000000000000000000000000000000000D9
+:1028000000000000000000000000000000000000C8
+:1028100000000000000000000000000000000000B8
+:1028200000000000000000000000000000000000A8
+:102830000000000000000000000000000000000098
+:102840000000000000000000000000000000000088
+:102850000000000000000000000000000000000078
+:102860000000000000000000000000000000000068
+:102870000000000000000000000000000000000058
+:102880000000000000000000000000000000000048
+:102890000000000000000000000000000000000038
+:1028A0000000000000000000000000000000000028
+:1028B0000000000000000000000000000000000018
+:1028C0000000000000000000000000000000000008
+:1028D00000000000000000000000000000000000F8
+:1028E0000000000000000000000090000010000048
+:1028F0000000000800009008001000000000000226
+:1029000000009000001000000000001000009DA8D2
+:10291000000000000000000880000000000000002F
+:102920000000000080000000000000000000000027
+:10293000800000000000000000000000000091A0E6
+:102940000000000000000008000093C00001000427
+:1029500000000001000093C8000000000000000219
+:10296000000093D00000000000000008000093D495
+:102970000000000000000002000094980000000029
+:1029800000000008000093D80008000000000008C4
+:1029900000009B3800400000000000400000941838
+:1029A0000008000000000008000094580008000023
+:1029B00000000008000094A800C800000000009873
+:1029C000000096380098000000000028000096786B
+:1029D00000980000000000280000C0000540003002
+:1029E000000005400000CB200008000000000001AE
+:1029F0000000CB21000800000000000100002008BA
+:102A00000010000000000010000020000000000086
+:102A10000000000800009D600008000000000002A7
+:102A200000009DA000000000000000010000000068
+:102A30000000000000000000000000000000000096
+:102A40000000000000000000000000000000000086
+:102A50008000000000000000000000008000000076
+:102A600000000000000000008000000000000000E6
+:102A700000000000800000000000000000000000D6
+:102A80008000000000000000000000008000000046
+:102A900000000000000000008000000000000000B6
+:102AA00000000000800000000000000000000000A6
+:102AB0008000000000000000000000008000000016
+:102AC0000000000000000000800000000000000086
+:102AD0000000000080000000000000000000000076
+:102AE0008000000000000000000000000000000066
+:102AF00000000000000000000000000000000000D6
+:102B000000000000000000000000000000000000C5
+:102B100000000000000000000000000000000000B5
+:102B20000000000000000000800000000000000025
+:102B30000000000080000000000000000000000015
+:102B40008000000000000000000000000000000005
+:102B500000000000000000008000000000000000F5
+:102B600000000000800000000000000000000000E5
+:102B700080000000000000000000000000000000D5
+:102B80000000000000000000000000000000000045
+:102B90000000000000000000000000000000000035
+:102BA0000000000000000000000000000000000025
+:102BB0000000000000000000000000000000000015
+:102BC00000000000000012C800800000000000802B
+:102BD0000000000100000000000000000000A00054
+:102BE000071000000000071000001EC800000000D1
+:102BF000000000080000AEC000080000000000084F
+:102C00000000AE4000080000000000080000AE8098
+:102C1000000800000000000800002008001000006C
+:102C2000000000100000200000000000000000086C
+:102C30000000A01007100040000000400000AF405E
+:102C400000080000000000010000AF410008000083
+:102C50000000000100001ED0000000000000000184
+:102C600000001ED8000000000000000200001EDA74
+:102C70000000000000000002000012B00008000088
+:102C800000000008800000000000000000000000BC
+:102C90008000000000000000000000008000000034
+:102CA00000000000000000008000000000000000A4
+:102CB0000000000080000000000000000000000094
+:102CC0008000000000000000000000008000000004
+:102CD0000000000000000000800000000000000074
+:102CE0000000000080000000000000000000000064
+:102CF00000000000000000000000000000000000D4
+:102D000000000000000000000000000000000000C3
+:102D100000000000000000000000000000000000B3
+:102D20000000000000000000000000008000000023
+:102D30000000000000000000800000000000000013
+:102D40000000000000000000000000000000000083
+:102D50008000000000000000000000008000000073
+:102D600000000000000000008000000000000000E3
+:102D700000000000800000000000000000000000D3
+:102D80000000B00000180000000000180000B300B0
+:102D900000400000000000400000B30000400002BE
+:102DA000000000010000B30100400002000000002C
+:102DB0000000800000400000000000408000000093
+:102DC000000000000000000000008000000800403B
+:102DD000000000040000800400080040000000041F
+:102DE0000000BB0000280000000000280000BC40DC
+:102DF00000100000000000100000880000800000AB
+:102E00000000008000008800000800800000000230
+:102E100000008C00002000000000002000002008BE
+:102E20000010000000000010000020000000000062
+:102E30000000000800001108000800000000000861
+:102E4000000011680008000000000008000011A840
+:102E500000080000000000080000127000080000D8
+:102E600000000001000012710008000000000001D5
+:102E700000008D000010000400000004000013207A
+:102E80000030001800000010000013280030001867
+:102E900000000002800000000000000000000000B0
+:102EA000800000000000000000000000000011E8A9
+:102EB0000000000000000001800000000000000091
+:102EC0000000000080000000000000000000000082
+:102ED00080000000000000000000000080000000F2
+:102EE0000000000000000000800000000000000062
+:102EF0000000000080000000000000000000000052
+:102F000000000000000000000000000000000000C1
+:102F100000000000000000000000000000000000B1
+:102F200000000000000000000000000000000000A1
+:102F30008000000000000000000000008000000091
+:102F40000000000000000000000000000000000081
+:102F500000000000000083080080000000000080E6
+:102F60000000000100000000000000000000200838
+:102F70000010000000000010000020000000000011
+:102F80000000000800008D1000080000000000088C
+:102F900000008D7000080000000000080000845050
+:102FA000046000280000046000008EA000080000FB
+:102FB0000000000100008EA10008000000000001D8
+:102FC0000000840800080000000000080000844899
+:102FD000000000000000000100008DF40008000067
+:102FE0000000000200008DF6000800000000000252
+:102FF00000008E04001000000000000480000000AB
+:103000000000000000000000800000000000000040
+:103010000000000080000000000000000000000030
+:1030200000000000000000000000000000000000A0
+:103030000000000000000000000000000000000090
+:103040000000000000000000000000000000000080
+:103050008000000000000000000000008000000070
+:103060000000000000000000000000000000000060
+:1030700000000000800000000000000000000000D0
+:103080008000000000000000000000008000000040
+:1030900000000000000000008000000000000000B0
+:1030A00000000000000030000040000000000008A8
+:1030B00000003008004000000000002800003390AD
+:1030C00001C00010000000080000320000200000D5
+:1030D0000000002000003720000000000000000871
+:1030E0000000102006200038000000080000A000AA
+:1030F000000000000000200000003EA900000000C9
+:103100000000000100003EC80000000000000002B6
+:1031100000001C4000E000080000000880000000E3
+:103120000000000000000000000040000008000057
+:103130000000000100004001000800000000000144
+:103140000000404000080004000000020000406051
+:103150000008000400000004000040000008000017
+:10316000000000040000400400080000000000040B
+:10317000000040400000000000000008000040483F
+:1031800000000000000000080000800000000000B7
+:103190000000001000005040000100040000000189
+:1031A0000000500000000000000000200000500857
+:1031B00000100000000000040000500C001000008F
+:1031C00000000001000052C70000000000000001E4
+:1031D000000052C6000000000000000100003000A6
+:1031E0000030001800000004000030040030001817
+:1031F0000000000400003008003000180000000249
+:103200000000300A00300018000000020000300CFE
+:1032100000300018000000010000300D00300018E0
+:10322000000000010000300E003000180000000116
+:1032300000003010003000180000000400003014BE
+:103240000030001800000004000050000100008061
+:103250000008000400005004010000800008000481
+:103260000000000A0000000000000000000050689C
+:103270000100008000000001000050690100008092
+:10328000000000010000506C0100008000000002FE
+:103290000000506E0100008000000002000050702D
+:1032A0000100008000000004000050740100008054
+:1032B00000000004000050660100008000000002D1
+:1032C0000000506401000080000000010000506018
+:1032D0000100008000000002000050620100008038
+:1032E00000000002000050500100008000000004B7
+:1032F00000005054010000800000000400005058FD
+:1033000001000080000000040000505C010000800B
+:10331000000000040000507C01000080000000015B
+:103320000000507D010000800000000100004018F6
+:103330000010000000000004000040900010000099
+:10334000000000040000409800100000000000048D
+:1033500000004110000000000000000200004112C7
+:103360000000000000000002000041140000000006
+:1033700000000002000041160000000000000002F2
+:1033800000006040000800000000000200006042F1
+:103390000008000000000002000060440008000077
+:1033A0000000000400006080000800000000000829
+:1033B000000060C00040000800000008000060003D
+:1033C0000008000000000002000060020008000089
+:1033D000000000010000600400080000000000027E
+:1033E0000000634000080000000000080000638047
+:1033F00000080000000000040000638400080000D2
+:1034000000000001000063C000080000000000028E
+:10341000000063C400080000000000020000640017
+:103420000008000000000004000070000010000010
+:103430000000000400007004001000000000000400
+:103440000000700800100000000000040000700080
+:1034500000080000000000020000700200080000E8
+:1034600000000001000070040008000000000002DD
+:1034700000007040000800000000000200007044DE
+:103480000008000000000002000070460008000074
+:10349000000000020000764800080000000000085C
+:1034A000000070800008000000000002000070842E
+:1034B00000080000000000020000768800080000FC
+:1034C000000000080000804000080000000000012B
+:1034D0000000804100080000000000010000804260
+:1034E0000008000000000001000080430008000008
+:1034F0000000000100008000000800000000000241
+:1035000000008002000800000000000100008004AC
+:103510000008000000000002000080C00008000059
+:1035200000000002000080C200080000000000024D
+:10353000000080C40008000000000002000080803D
+:103540000008000000000001000080810008000069
+:10355000000000010000808200080000000000015F
+:10356000000080830008000000000001000080844B
+:103570000008000000000001000080850008000035
+:10358000000000010000808600080000000000012B
+:10359000000060000008000000000002000060025F
+:1035A00000080000000000010000600400080000A6
+:1035B000000000020000604200C00018000000028D
+:1035C0000000604000C00018000000020000604CD5
+:1035D00000C00018000000080000604400C000188F
+:1035E000000000080000605700C000180000000143
+:1035F0000000605400C00018000000020000605687
+:1036000000C0001800000001000066400008000033
+:1036100000000008000066800008000000000008AC
+:10362000000066C000080000000000080000D94249
+:1036300000180000000000020000DE400000000052
+:10364000000000000000E000000000000000000496
+:103650000000DD4000000000000000040000DD4428
+:1036600000000000000000040000DD480000000031
+:10367000000000040000DD4C000000000000000419
+:103680000000DD5000000000000000040000DD54D8
+:1036900000000000000000040000DD5800000000F1
+:1036A000000000040000DD400000000000000020D9
+:1036B0000000DA0000000000000000040000DA0052
+:1036C00000000000000000680000BB600000000077
+:1036D000000000000000D000000000000000000416
+:1036E0000000B0C000000000000000040000B0C4F2
+:1036F00000000000000000040000B0C8000000004E
+:10370000000000040000B0C0000000000000001035
+:103710000000D6B000000000000000040000D6B495
+:1037200000000000000000040000D6B80000000007
+:10373000000000040000D6BC0000000000000004EF
+:103740000000D6B000000000000000100000D348C8
+:1037500000000000000000080000D3580000000036
+:1037600000000080000000100000000000000000C9
+:103770000000D35800000000000000080000000016
+:08378000060205000000000034
+:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e2-6.0.34.0.fw.ihex b/firmware/bnx2x/bnx2x-e2-6.0.34.0.fw.ihex
deleted file mode 100644
index 78b41615e7d..00000000000
--- a/firmware/bnx2x/bnx2x-e2-6.0.34.0.fw.ihex
+++ /dev/null
@@ -1,15442 +0,0 @@
-:10000000000052D8000000680000070C00005348B0
-:100010000000318000005A58000000B000008BE062
-:100020000000C14C00008C98000000D800014DE891
-:100030000000F16400014EC800000074000240306E
-:1000400000005250000240A8000000B800029300D7
-:1000500000012110000293C000000FFC0003B4D87F
-:10006000000000040003C4D8020400480000000F90
-:1000700002040054000000450204005C0000000679
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040258000000360204025C000000365F
-:10017000020402600810000002040264081000007B
-:1001800002040004000000FF02040008000000FF59
-:100190000204000C000000FF02040010000000FF39
-:1001A000020400140000007F02040018000000FF99
-:1001B0000204001C000000FF02040020000000FFF9
-:1001C000020400240000003E020400280000000099
-:1001D0000204002C0000003F020400300000003F39
-:1001E000020400340000003F020400380000003F19
-:1001F0000204003C0000003F020400400000003FF9
-:10020000020400440000003F020404CC000000018E
-:1002100002042008000002110204200C0000020069
-:10022000020420100000020402042014000002193D
-:100230000204201C0000FFFF020420200000FFFF3A
-:10024000020420240000FFFF020420280000FFFF1A
-:1002500002042038000000200604203C0000000FAB
-:1002600002042078000000210604207C0000000F1A
-:10027000020420B800000001060420BC0000000FAA
-:10028000020420F800000001060420FC0000003FEA
-:10029000020421F800000001060421FC0000000F08
-:1002A0000204223807FFFFFF0204223C0000007F07
-:1002B0000204224007FFFFFF020422440000003F27
-:1002C00001042248000000000104224C000000004C
-:1002D000010422500000000001042254000000002C
-:1002E00001042258000000000104225C000000000C
-:1002F00001042260000000000104226400000000EC
-:1003000001042268000000000104226C00000000CB
-:1003100001042270000000000104227400000000AB
-:1003200001042278000000000104227C000000008B
-:10033000020422C00000FFFF020422C40000FFFFED
-:10034000020422C80000FFFF020422CC0000FFFFCD
-:100350000C042000000003E80A0420000000000153
-:100360000B042000000000030605400000000D0003
-:100370000205004400000020020500480000003291
-:1003800002050090021500200205009402150020CD
-:1003900002050098000000300205009C08100000D3
-:1003A000020500A000000036020500A40000003095
-:1003B000020500A800000031020500B000000004A2
-:1003C000020500B400000005020500C000000000A6
-:1003D000020500C400000004020500D40000000172
-:1003E00002050114000000010205011C00000001CB
-:1003F00002050120000000020205020400000001C5
-:100400000205020C0000004002050210000000403E
-:100410000205021C00000020020502200000001C52
-:100420000205022400000020060502400000000A28
-:1004300004050280002000000205005000000007B3
-:1004400002050054000000070205005800000000EB
-:100450000205005C000000080205006000000001C9
-:100460000605006400000003020500D80000000635
-:100470000205000400000001020500080000000160
-:100480000205000C00000001020500100000000140
-:100490000205001400000001020500180000000120
-:1004A0000205001C00000001020500200000000100
-:1004B00002050024000000010205002800000001E0
-:1004C0000205002C000000010205003000000001C0
-:1004D00002050034000000010205003800000001A0
-:1004E0000205003C00000001020500400000000180
-:1004F000020500E00000000D020500E80000000019
-:10050000020500F000000000020500F800000000F5
-:10051000020500E40000002D020500EC00000020B0
-:10052000020500F400000020020500FC000000208D
-:10053000020500E00000001D020500E800000010B8
-:10054000020500F000000010020500F80000001095
-:10055000020500E40000003D020500EC0000003050
-:10056000020500F400000030020500FC000000302D
-:10057000020500E00000004D020500E80000004018
-:10058000020500F000000040020500F800000040F5
-:10059000020500E40000006D020500EC00000060B0
-:1005A000020500F400000060020500FC000000608D
-:1005B000020500E00000005D020500E800000050B8
-:1005C000020500F000000050020500F80000005095
-:1005D000020500E40000007D020500EC0000007050
-:1005E000020500F400000070020500FC000000702D
-:1005F0000406100002000020020600DC00000001DA
-:100600000406020000030220020600DC00000000D5
-:100610000718040000AC0000081807D800050223E2
-:10062000071C000029B30000071C8000312E0A6D52
-:10063000071D000034A816B9071D80002E6C23E4A6
-:10064000071E0000034B2F80081E07F03F02022503
-:100650000118000000000000011800040000000064
-:1006600001180008000000000118000C0000000044
-:100670000118001000000000011800140000000024
-:1006800002180020000000010218002400000002EF
-:1006900002180028000000030218002C00000000CF
-:1006A00002180030000000040218003400000001AD
-:1006B00002180038000000000218003C0000000191
-:1006C000021800400000000402180044000000006E
-:1006D00002180048000000010218004C000000034E
-:1006E0000218005000000000021800540000000131
-:1006F00002180058000000040218005C000000000E
-:1007000002180060000000010218006400000003ED
-:1007100002180068000000000218006C00000001D0
-:1007200002180070000000040218007400000000AD
-:1007300002180078000000040218007C000000038A
-:100740000618008000000002021800A400007FFFCD
-:10075000021800A8000003FF021802240000000095
-:1007600002180234000000000218024C00000000D1
-:10077000021802E4000000FF061810000000040048
-:10078000021B8BC000000001021B8000000000342F
-:10079000021B804000000018021B80800000000C3B
-:1007A000021B80C0000000200C1B83000008647046
-:1007B0000A1B8300000001570B1B83000000055F2C
-:1007C0000A1B8340000000000C1B8340000002262F
-:1007D0000B1B834000000001021B83800008647033
-:1007E000021B83C000000226021B148000000001CF
-:1007F0000A1B148000000000021B9440000000014E
-:10080000061B944800000002061A1000000002B304
-:10081000041A1ACC00010227061A1AD00000000898
-:10082000061A2008000000C8061A20000000000276
-:10083000041A1BF800900228061A3718000000045A
-:10084000061A371000000002061A500000000002CD
-:10085000061A500800000004061A50180000000490
-:10086000061A502800000004061A50380000000440
-:10087000061A504800000004061A505800000004F0
-:10088000061A506800000004061A507800000002A2
-:10089000041A52C0000202B8061A405000000006B6
-:1008A000041A4068000202BA041A4040000402BC64
-:1008B000041A8000000102C0061A80040000000330
-:1008C000041A8010000102C1061A801400000003FF
-:1008D000041A8020000102C2061A802400000003CE
-:1008E000041A8030000102C3061A8034000000039D
-:1008F000041A8040000102C4061A8044000000036C
-:10090000041A8050000102C5061A8054000000033A
-:10091000041A8060000102C6061A80640000000309
-:10092000041A8070000102C7061A807400000003D8
-:10093000041A8080000102C8061A808400000003A7
-:10094000041A8090000102C9061A80940000000376
-:10095000041A80A0000102CA061A80A40000000345
-:10096000041A80B0000102CB061A80B40000000314
-:10097000041A80C0000102CC061A80C400000003E3
-:10098000041A80D0000102CD061A80D400000003B2
-:10099000041A80E0000102CE061A80E40000000381
-:1009A000041A80F0000102CF061A80F40000000350
-:1009B000041A8100000102D0061A8104000000031D
-:1009C000041A8110000102D1061A811400000003EC
-:1009D000041A8120000102D2061A812400000003BB
-:1009E000041A8130000102D3061A8134000000038A
-:1009F000041A8140000102D4061A81440000000359
-:100A0000041A8150000102D5061A81540000000327
-:100A1000041A8160000102D6061A816400000003F6
-:100A2000041A8170000102D7061A817400000003C5
-:100A3000041A8180000102D8061A81840000000394
-:100A4000041A8190000102D9061A81940000000363
-:100A5000041A81A0000102DA061A81A40000000332
-:100A6000041A81B0000102DB061A81B40000000301
-:100A7000041A81C0000102DC061A81C400000003D0
-:100A8000041A81D0000102DD061A81D4000000039F
-:100A9000041A81E0000102DE061A81E4000000036E
-:100AA000041A81F0000102DF061A81F4000000033D
-:100AB000041A8200000102E0061A8204000000030A
-:100AC000041A8210000102E1061A821400000003D9
-:100AD000041A8220000102E2061A822400000003A8
-:100AE000041A8230000102E3061A82340000000377
-:100AF000041A8240000102E4061A82440000000346
-:100B0000041A8250000102E5061A82540000000314
-:100B1000041A8260000102E6061A826400000003E3
-:100B2000041A8270000102E7061A827400000003B2
-:100B3000041A8280000102E8061A82840000000381
-:100B4000041A8290000102E9061A82940000000350
-:100B5000041A82A0000102EA061A82A4000000031F
-:100B6000041A82B0000102EB061A82B400000003EE
-:100B7000041A82C0000102EC061A82C400000003BD
-:100B8000041A82D0000102ED061A82D4000000038C
-:100B9000041A82E0000102EE061A82E4000000035B
-:100BA000041A82F0000102EF061A82F4000000032A
-:100BB000041A8300000102F0061A830400000003F7
-:100BC000041A8310000102F1061A831400000003C6
-:100BD000041A8320000102F2061A83240000000395
-:100BE000041A8330000102F3061A83340000000364
-:100BF000041A8340000102F4061A83440000000333
-:100C0000041A8350000102F5061A83540000000301
-:100C1000041A8360000102F6061A836400000003D0
-:100C2000041A8370000102F7061A8374000000039F
-:100C3000041A8380000102F8061A8384000000036E
-:100C4000041A8390000102F9061A8394000000033D
-:100C5000041A83A0000102FA061A83A4000000030C
-:100C6000041A83B0000102FB061A83B400000003DB
-:100C7000041A83C0000102FC061A83C400000003AA
-:100C8000041A83D0000102FD061A83D40000000379
-:100C9000041A83E0000102FE061A83E40000000348
-:100CA000041A83F0000102FF061A83F40000000317
-:100CB000041A840000010300061A840400000003E3
-:100CC000041A841000010301061A841400000003B2
-:100CD000041A842000010302061A84240000000381
-:100CE000041A843000010303061A84340000000350
-:100CF000041A844000010304061A8444000000031F
-:100D0000041A845000010305061A845400000003ED
-:100D1000041A846000010306061A846400000003BC
-:100D2000041A847000010307061A8474000000038B
-:100D3000041A848000010308061A8484000000035A
-:100D4000041A849000010309061A84940000000329
-:100D5000041A84A00001030A061A84A400000003F8
-:100D6000041A84B00001030B061A84B400000003C7
-:100D7000041A84C00001030C061A84C40000000396
-:100D8000041A84D00001030D061A84D40000000365
-:100D9000041A84E00001030E061A84E40000000334
-:100DA000041A84F00001030F061A84F40000000303
-:100DB000041A850000010310061A850400000003D0
-:100DC000041A851000010311061A8514000000039F
-:100DD000041A852000010312061A8524000000036E
-:100DE000041A853000010313061A8534000000033D
-:100DF000041A854000010314061A8544000000030C
-:100E0000041A855000010315061A855400000003DA
-:100E1000041A856000010316061A856400000003A9
-:100E2000041A857000010317061A85740000000378
-:100E3000041A858000010318061A85840000000347
-:100E4000041A859000010319061A85940000000316
-:100E5000041A85A00001031A061A85A400000003E5
-:100E6000041A85B00001031B061A85B400000003B4
-:100E7000041A85C00001031C061A85C40000000383
-:100E8000041A85D00001031D061A85D40000000352
-:100E9000041A85E00001031E061A85E40000000321
-:100EA000041A85F00001031F061A85F400000003F0
-:100EB000041A860000010320061A860400000003BD
-:100EC000041A861000010321061A8614000000038C
-:100ED000041A862000010322061A8624000000035B
-:100EE000041A863000010323061A8634000000032A
-:100EF000041A864000010324061A864400000003F9
-:100F0000041A865000010325061A865400000003C7
-:100F1000041A866000010326061A86640000000396
-:100F2000041A867000010327061A86740000000365
-:100F3000041A868000010328061A86840000000334
-:100F4000041A869000010329061A86940000000303
-:100F5000041A86A00001032A061A86A400000003D2
-:100F6000041A86B00001032B061A86B400000003A1
-:100F7000041A86C00001032C061A86C40000000370
-:100F8000041A86D00001032D061A86D4000000033F
-:100F9000041A86E00001032E061A86E4000000030E
-:100FA000041A86F00001032F061A86F400000003DD
-:100FB000041A870000010330061A870400000003AA
-:100FC000041A871000010331061A87140000000379
-:100FD000041A872000010332061A87240000000348
-:100FE000041A873000010333061A87340000000317
-:100FF000041A874000010334061A874400000003E6
-:10100000041A875000010335061A875400000003B4
-:10101000041A876000010336061A87640000000383
-:10102000041A877000010337061A87740000000352
-:10103000041A878000010338061A87840000000321
-:10104000041A879000010339061A879400000003F0
-:10105000041A87A00001033A061A87A400000003BF
-:10106000041A87B00001033B061A87B4000000038E
-:10107000041A87C00001033C061A87C4000000035D
-:10108000041A87D00001033D061A87D4000000032C
-:10109000041A87E00001033E061A87E400000003FB
-:1010A000041A87F00001033F061A87F400000003CA
-:1010B000041A880000010340061A88040000000397
-:1010C000041A881000010341061A88140000000366
-:1010D000041A882000010342061A88240000000335
-:1010E000041A883000010343061A88340000000304
-:1010F000041A884000010344061A884400000003D3
-:10110000041A885000010345061A885400000003A1
-:10111000041A886000010346061A88640000000370
-:10112000041A887000010347061A8874000000033F
-:10113000041A888000010348061A8884000000030E
-:10114000041A889000010349061A889400000003DD
-:10115000041A88A00001034A061A88A400000003AC
-:10116000041A88B00001034B061A88B4000000037B
-:10117000041A88C00001034C061A88C4000000034A
-:10118000041A88D00001034D061A88D40000000319
-:10119000041A88E00001034E061A88E400000003E8
-:1011A000041A88F00001034F061A88F400000003B7
-:1011B000041A890000010350061A89040000000384
-:1011C000041A891000010351061A89140000000353
-:1011D000041A892000010352061A89240000000322
-:1011E000041A893000010353061A893400000003F1
-:1011F000041A894000010354061A894400000003C0
-:10120000041A895000010355061A8954000000038E
-:10121000041A896000010356061A8964000000035D
-:10122000041A897000010357061A8974000000032C
-:10123000041A898000010358061A898400000003FB
-:10124000041A899000010359061A899400000003CA
-:10125000041A89A00001035A061A89A40000000399
-:10126000041A89B00001035B061A89B40000000368
-:10127000041A89C00001035C061A89C40000000337
-:10128000041A89D00001035D061A89D40000000306
-:10129000041A89E00001035E061A89E400000003D5
-:1012A000041A89F00001035F061A89F400000003A4
-:1012B000041A8A0000010360061A8A040000000371
-:1012C000041A8A1000010361061A8A140000000340
-:1012D000041A8A2000010362061A8A24000000030F
-:1012E000041A8A3000010363061A8A3400000003DE
-:1012F000041A8A4000010364061A8A4400000003AD
-:10130000041A8A5000010365061A8A54000000037B
-:10131000041A8A6000010366061A8A64000000034A
-:10132000041A8A7000010367061A8A740000000319
-:10133000041A8A8000010368061A8A8400000003E8
-:10134000041A8A9000010369061A8A9400000003B7
-:10135000041A8AA00001036A061A8AA40000000386
-:10136000041A8AB00001036B061A8AB40000000355
-:10137000041A8AC00001036C061A8AC40000000324
-:10138000041A8AD00001036D061A8AD400000003F3
-:10139000041A8AE00001036E061A8AE400000003C2
-:1013A000041A8AF00001036F061A8AF40000000391
-:1013B000041A8B0000010370061A8B04000000035E
-:1013C000041A8B1000010371061A8B14000000032D
-:1013D000041A8B2000010372061A8B2400000003FC
-:1013E000041A8B3000010373061A8B3400000003CB
-:1013F000041A8B4000010374061A8B44000000039A
-:10140000041A8B5000010375061A8B540000000368
-:10141000041A8B6000010376061A8B640000000337
-:10142000041A8B7000010377061A8B740000000306
-:10143000041A8B8000010378061A8B8400000003D5
-:10144000041A8B9000010379061A8B9400000003A4
-:10145000041A8BA00001037A061A8BA40000000373
-:10146000041A8BB00001037B061A8BB40000000342
-:10147000041A8BC00001037C061A8BC40000000311
-:10148000041A8BD00001037D061A8BD400000003E0
-:10149000041A8BE00001037E061A8BE400000003AF
-:1014A000041A8BF00001037F061A8BF4000000037E
-:1014B000041A8C0000010380061A8C04000000034B
-:1014C000041A8C1000010381061A8C14000000031A
-:1014D000041A8C2000010382061A8C2400000003E9
-:1014E000041A8C3000010383061A8C3400000003B8
-:1014F000041A8C4000010384061A8C440000000387
-:10150000041A8C5000010385061A8C540000000355
-:10151000041A8C6000010386061A8C640000000324
-:10152000041A8C7000010387061A8C7400000003F3
-:10153000041A8C8000010388061A8C8400000003C2
-:10154000041A8C9000010389061A8C940000000391
-:10155000041A8CA00001038A061A8CA40000000360
-:10156000041A8CB00001038B061A8CB4000000032F
-:10157000041A8CC00001038C061A8CC400000003FE
-:10158000041A8CD00001038D061A8CD400000003CD
-:10159000041A8CE00001038E061A8CE4000000039C
-:1015A000041A8CF00001038F061A8CF4000000036B
-:1015B000041A8D0000010390061A8D040000000338
-:1015C000041A8D1000010391061A8D140000000307
-:1015D000041A8D2000010392061A8D2400000003D6
-:1015E000041A8D3000010393061A8D3400000003A5
-:1015F000041A8D4000010394061A8D440000000374
-:10160000041A8D5000010395061A8D540000000342
-:10161000041A8D6000010396061A8D640000000311
-:10162000041A8D7000010397061A8D7400000003E0
-:10163000041A8D8000010398061A8D8400000003AF
-:10164000041A8D9000010399061A8D94000000037E
-:10165000041A8DA00001039A061A8DA4000000034D
-:10166000041A8DB00001039B061A8DB4000000031C
-:10167000041A8DC00001039C061A8DC400000003EB
-:10168000041A8DD00001039D061A8DD400000003BA
-:10169000041A8DE00001039E061A8DE40000000389
-:1016A000041A8DF00001039F061A8DF40000000358
-:1016B000041A8E00000103A0061A8E040000000325
-:1016C000041A8E10000103A1061A8E1400000003F4
-:1016D000041A8E20000103A2061A8E2400000003C3
-:1016E000041A8E30000103A3061A8E340000000392
-:1016F000041A8E40000103A4061A8E440000000361
-:10170000041A8E50000103A5061A8E54000000032F
-:10171000041A8E60000103A6061A8E6400000003FE
-:10172000041A8E70000103A7061A8E7400000003CD
-:10173000041A8E80000103A8061A8E84000000039C
-:10174000041A8E90000103A9061A8E94000000036B
-:10175000041A8EA0000103AA061A8EA4000000033A
-:10176000041A8EB0000103AB061A8EB40000000309
-:10177000041A8EC0000103AC061A8EC400000003D8
-:10178000041A8ED0000103AD061A8ED400000003A7
-:10179000041A8EE0000103AE061A8EE40000000376
-:1017A000041A8EF0000103AF061A8EF40000000345
-:1017B000041A8F00000103B0061A8F040000000312
-:1017C000041A8F10000103B1061A8F1400000003E1
-:1017D000041A8F20000103B2061A8F2400000003B0
-:1017E000041A8F30000103B3061A8F34000000037F
-:1017F000041A8F40000103B4061A8F44000000034E
-:10180000041A8F50000103B5061A8F54000000031C
-:10181000041A8F60000103B6061A8F6400000003EB
-:10182000041A8F70000103B7061A8F7400000003BA
-:10183000041A8F80000103B8061A8F840000000389
-:10184000041A8F90000103B9061A8F940000000358
-:10185000041A8FA0000103BA061A8FA40000000327
-:10186000041A8FB0000103BB061A8FB400000003F6
-:10187000041A8FC0000103BC061A8FC400000003C5
-:10188000041A8FD0000103BD061A8FD40000000394
-:10189000041A8FE0000103BE061A8FE4000000075F
-:1018A000041A62C0002003BF061A1AF000000042AA
-:1018B000061AAF0000000008061AE000000005400C
-:1018C000061AD00000000072061AD248000000106C
-:1018D000061AD6B000000020061AD470000000904E
-:1018E000061AD46800000002061AA000000001C415
-:1018F000061A300000000010061A308000000010A8
-:10190000061A310000000010061A31800000001095
-:10191000061A330000000012061A3390000000700F
-:10192000061AD45800000002061AD348000000022C
-:10193000061AD35800000020061AA710000001C4A0
-:10194000061A304000000010061A30C000000010D7
-:10195000061A314000000010061A31C000000010C5
-:10196000061A334800000012061A355000000070B5
-:10197000061AD46000000002061AD35000000002CC
-:10198000061AD3D800000020021AAE200000000082
-:10199000061A500000000002061A508000000012D3
-:1019A000041A4000000203DF041A63C0000203E1CE
-:1019B000061A700000000004061A32000000000839
-:1019C000021AAE2400000000061A501000000002A7
-:1019D000061A50C800000012041A4008000203E36F
-:1019E000041A63C8000203E5061A70100000000420
-:1019F000061A322000000008021AAE28000000007B
-:101A0000061A502000000002061A511000000012B1
-:101A1000041A4010000203E7041A63D0000203E92D
-:101A2000061A702000000004061A32400000000868
-:101A3000021AAE2C00000000061A5030000000020E
-:101A4000061A515800000012041A4018000203EB55
-:101A5000041A63D8000203ED061A70300000000477
-:101A6000061A326000000008021AAE3000000000C2
-:101A7000061A504000000002061A51A00000001291
-:101A8000041A4020000203EF041A63E0000203F18D
-:101A9000061A704000000004061A32800000000898
-:101AA000021AAE3400000000061A50500000000276
-:101AB000061A51E800000012041A4028000203F33D
-:101AC000041A63E8000203F5061A705000000004CF
-:101AD000061A32A000000008021AAE38000000000A
-:101AE000061A506000000002061A52300000001270
-:101AF000041A4030000203F7041A63F0000203F9ED
-:101B0000061A706000000004061A32C000000008C7
-:101B1000021AAE3C00000000061A507000000002DD
-:101B2000061A527800000012041A4038000203FB23
-:101B3000041A63F8000203FD061A70700000000426
-:101B4000061A32E0000000080200A2A40000020908
-:101B50000200A270000000000200A2740000000059
-:101B60000200A270000000000200A2740000000049
-:101B70000200A270000000000200A2740000000039
-:101B80000200A270000000000200A2740000000029
-:101B9000020100B400000001020100B800000001D1
-:101BA000020100CC00000001020100D00000000191
-:101BB000020100DC00000001020101000000000140
-:101BC00002010104000000010201007C003000005D
-:101BD00002010084000000280201008C00000000C7
-:101BE00002010130000000040201025C000000015B
-:101BF0000201032800000000020160580000FFFFFE
-:101C0000020160700000000702010554000000306E
-:101C1000020100C400000001020100F80000000100
-:101C2000020100F00000000102010080003000000D
-:101C3000020100880000002802010090000000005E
-:101C40000201013400000004020102DC0000000176
-:101C50000201032C000000000201605C0000FFFF95
-:101C600002016074000000070201056400000030FA
-:101C7000020100C800000001020100FC0000000198
-:101C8000020100F400000001020C10000000002816
-:101C9000020C200800000211020C200C00000200BF
-:101CA000020C201000000204020C201C0000FFFFA8
-:101CB000020C20200000FFFF020C20240000FFFF88
-:101CC000020C20280000FFFF020C2038000000005A
-:101CD000020C203C00000037020C204000000021D4
-:101CE000020C204400000020060C20480000001DCB
-:101CF000020C20BC00000001060C20C00000003FC8
-:101D0000020C21BC00000001020C21C000000001F7
-:101D1000020C21C400000001060C21C80000001CB8
-:101D2000020C223807FFFFFF020C223C0000007F5C
-:101D3000020C224007FFFFFF020C22440000003F7C
-:101D4000010C224800000000010C224C00000000A1
-:101D5000010C225000000000010C22540000000081
-:101D6000010C225800000000010C225C0000000061
-:101D7000010C226000000000010C22640000000041
-:101D8000010C226800000000010C226C0000000021
-:101D9000010C227000000000010C22740000000001
-:101DA000010C227800000000010C227C00000000E1
-:101DB000020C22D80000FFFF020C22DC0000FFFF13
-:101DC000020C22E00000FFFF020C22E40000FFFFF3
-:101DD0000C0C2000000003E80A0C200000000001A9
-:101DE0000B0C200000000003020C40080000101142
-:101DF000020C400C00001000020C40100000100407
-:101E0000020C401400001021020C401C0000FFFFD7
-:101E1000020C40200000FFFF020C40240000FFFFE6
-:101E2000020C40280000FFFF020C40380000004672
-:101E3000020C403C0000000C060C40400000000278
-:101E4000020C404800000018020C404C000000F05A
-:101E5000060C40500000001F020C40CC00000001A6
-:101E6000060C40D00000003A020C41B8000000010E
-:101E7000060C41BC00000003020C41C80000000138
-:101E8000020C41CC00000001060C41D00000001AF9
-:101E9000020C423807FFFFFF020C423C0000007FAB
-:101EA000020C424007FFFFFF020C42440000003FCB
-:101EB000010C424800000000010C424C00000000F0
-:101EC000010C425000000000010C425400000000D0
-:101ED000010C425800000000010C425C00000000B0
-:101EE000010C426000000000010C42640000000090
-:101EF000010C426800000000010C426C0000000070
-:101F0000010C427000000000010C4274000000004F
-:101F1000010C427800000000010C427C000000002F
-:101F2000010C428000000000020C42D80000FFFFBC
-:101F3000020C42DC0000FFFF020C42E00000FFFF49
-:101F4000020C42E40000FFFF0C0C4000000003E81C
-:101F50000A0C4000000000010B0C400000000003D0
-:101F6000060D400000000A00020D0044000000328F
-:101F7000020D008C02150020020D009002150020B9
-:101F8000020D009408100000020D009800000036B9
-:101F9000020D00A000000000020D00A400000004DB
-:101FA000020D00A800000004060D00AC00000002B5
-:101FB000020D00B800000002020D00C00000000188
-:101FC000020D00C800000002020D00CC000000025B
-:101FD000020D015C00000001020D0164000000011F
-:101FE000020D016800000002020D02040000000161
-:101FF000020D020C00000020020D02100000004043
-:10200000020D021400000040020D02200000000337
-:10201000020D022400000018060D028000000012CC
-:10202000040D0300001803FF060D03600000000C00
-:10203000020D004C00000001020D005000000002E3
-:10204000020D005400000000020D005800000008BE
-:10205000060D005C00000004020D00C40000000436
-:10206000020D000400000001020D00080000000144
-:10207000020D000C00000001020D00100000000124
-:10208000020D001400000001020D00180000000104
-:10209000020D001C00000001020D002000000001E4
-:1020A000020D002400000001020D002800000001C4
-:1020B000020D002C00000001020D003000000001A4
-:1020C000020D003400000001020D00380000000184
-:1020D000020D003C00000001020D01140000000987
-:1020E000020D011C0000000A020D01240000000086
-:1020F000020D012C00000000020D01340000000060
-:10210000020D013C0000000B020D01440000000024
-:10211000020D011800000029020D01200000002A14
-:10212000020D012800000020020D013000000020F7
-:10213000020D013800000020020D01400000002BBC
-:10214000020D014800000020020D011400000019DA
-:10215000020D011C0000001A020D012400000010F5
-:10216000020D012C00000010020D013400000010CF
-:10217000020D013C0000001B020D01440000001094
-:10218000020D011800000039020D01200000003A84
-:10219000020D012800000030020D01300000003067
-:1021A000020D013800000030020D01400000003B2C
-:1021B000020D014800000030020D0114000000492A
-:1021C000020D011C0000004A020D01240000004025
-:1021D000020D012C00000040020D013400000040FF
-:1021E000020D013C0000004B020D014400000040C4
-:1021F000020D011800000069020D01200000006AB4
-:10220000020D012800000060020D01300000006096
-:10221000020D013800000060020D01400000006B5B
-:10222000020D014800000060020D01140000005979
-:10223000020D011C0000005A020D01240000005094
-:10224000020D012C00000050020D0134000000506E
-:10225000020D013C0000005B020D01440000005033
-:10226000020D011800000079020D01200000007A23
-:10227000020D012800000070020D01300000007006
-:10228000020D013800000070020D01400000007BCB
-:10229000020D014800000070060E2000000008003A
-:1022A000020E004C00000032020E009402150020C5
-:1022B000020E009802150020020E009C0000003063
-:1022C000020E00A008100000020E00A4000000365C
-:1022D000020E00A800000030020E00AC0000003129
-:1022E000020E00B400000003020E00B8000000005F
-:1022F000020E00C400000000020E00CC0000000628
-:10230000020E00D800000001020E0144000000018E
-:10231000020E014C00000001020E015000000002FC
-:10232000020E020400000001020E020C0000004038
-:10233000020E021000000040020E021C0000000409
-:10234000020E022000000020020E02240000000EF7
-:10235000020E02280000001B060E030000000012FF
-:10236000040E0280001B0417060E02EC000000059C
-:10237000020E00540000000C020E00580000000C79
-:10238000020E005C00000000020E00600000001061
-:10239000020E006400000010060E0068000000033A
-:1023A000020E00DC00000003020E00040000000129
-:1023B000020E000800000001020E000C00000001E7
-:1023C000020E001000000001020E001400000001C7
-:1023D000020E001800000001020E001C00000001A7
-:1023E000020E002000000001020E00240000000187
-:1023F000020E002800000001020E002C0000000167
-:10240000020E003000000001020E00340000000146
-:10241000020E003800000001020E003C0000000126
-:10242000020E004000000001020E00440000000106
-:10243000020E01100000000F020E01180000000043
-:10244000020E012000000000020E01280000000022
-:10245000020E01140000002F020E011C00000020DB
-:10246000020E012400000020020E012C00000020BA
-:10247000020E01100000001F020E011800000010E3
-:10248000020E012000000010020E012800000010C2
-:10249000020E01140000003F020E011C000000307B
-:1024A000020E012400000030020E012C000000305A
-:1024B000020E01100000004F020E01180000004043
-:1024C000020E012000000040020E01280000004022
-:1024D000020E01140000006F020E011C00000060DB
-:1024E000020E012400000060020E012C00000060BA
-:1024F000020E01100000005F020E011800000050E3
-:10250000020E012000000050020E012800000050C1
-:10251000020E01140000007F020E011C000000707A
-:10252000020E012400000070020E012C0000007059
-:102530000730040000D60000083007D80005043238
-:10254000073400003222000007348000312C0C894F
-:102550000735000038DD18D5073580002F16270D08
-:1025600007360000261532D30836711031DE0434E8
-:1025700001300000000000000130000400000000F5
-:1025800001300008000000000130000C00000000D5
-:1025900001300010000000000130001400000000B5
-:1025A0000230002000000001023000240000000280
-:1025B00002300028000000030230002C0000000060
-:1025C000023000300000000402300034000000013E
-:1025D00002300038000000000230003C0000000122
-:1025E00002300040000000040230004400000000FF
-:1025F00002300048000000010230004C00000003DF
-:1026000002300050000000000230005400000001C1
-:1026100002300058000000040230005C000000009E
-:10262000023000600000000102300064000000037E
-:1026300002300068000000000230006C0000000161
-:10264000023000700000000402300074000000003E
-:1026500002300078000000040230007C000000031B
-:102660000630008000000002023000A400007FFF5E
-:10267000023000A8000003FF023002240000000026
-:1026800002300234000000000230024C0000000062
-:10269000023002E40000FFFF0630200000000800C6
-:1026A00002338BC000000001023380000000001ADA
-:1026B000023380400000004E023380800000001092
-:1026C000023380C0000000200C33830000086470D7
-:1026D0000A338300000001570B3383000000055FBD
-:1026E0000A338340000000000C33834000000226C0
-:1026F0000B338340000000010233838000086470C4
-:10270000023383C00000022602331480000000015F
-:102710000A3314800000000006328000000001022D
-:1027200006322008000000C8063220000000000227
-:1027300004328520008F04360632875C00000009D1
-:1027400006323EB00000000606323ED00000000215
-:1027500006323E800000000A04323EA8000204C592
-:1027600006323E0000000020063250000000094002
-:102770000632400000000004043294C0000204C786
-:1027800006324110000000020632D0000000007046
-:102790000632DB00000000D40632DEA0000000029A
-:1027A0000632E00000000800063324000000011893
-:1027B00006321000000001880632500000000020A0
-:1027C00006325100000000200632520000000020B6
-:1027D00006325300000000200632540000000020A2
-:1027E000063255000000002006325600000000208E
-:1027F000063257000000002006325800000000207A
-:10280000063259000000002006325A000000002065
-:1028100006325B000000002006325C000000002051
-:1028200006325D000000002006325E00000000203D
-:1028300006325F0000000020063284F00000000233
-:1028400004328500000204C9063285080000000237
-:102850000632DE90000000020633286000000118F6
-:102860000632162000000188063250800000002049
-:102870000632518000000020063252800000002005
-:1028800006325380000000200632548000000020F1
-:1028900006325580000000200632568000000020DD
-:1028A00006325780000000200632588000000020C9
-:1028B000063259800000002006325A8000000020B5
-:1028C00006325B800000002006325C8000000020A1
-:1028D00006325D800000002006325E80000000208D
-:1028E00006325F8000000020063284F800000002FB
-:1028F00004328510000204CB063285180000000265
-:102900000632DE980000000202328450000000000F
-:102910000632401000000002023284540000000021
-:1029200006324020000000020232845800000000FD
-:1029300006324030000000020232845C00000000D9
-:1029400006324040000000020232846000000000B5
-:102950000632405000000002023284640000000091
-:10296000063240600000000202328468000000006D
-:1029700006324070000000020232846C0000000049
-:1029800006324080000000020720040000730000AF
-:1029900008200780001004CD072400002AD500007D
-:1029A0000724800027740AB60824D36063FA04CF92
-:1029B00001200000000000000120000400000000D1
-:1029C00001200008000000000120000C00000000B1
-:1029D0000120001000000000012000140000000091
-:1029E000022000200000000102200024000000025C
-:1029F00002200028000000030220002C000000003C
-:102A00000220003000000004022000340000000119
-:102A100002200038000000000220003C00000001FD
-:102A200002200040000000040220004400000000DA
-:102A300002200048000000010220004C00000003BA
-:102A4000022000500000000002200054000000019D
-:102A500002200058000000040220005C000000007A
-:102A6000022000600000000102200064000000035A
-:102A700002200068000000000220006C000000013D
-:102A8000022000700000000402200074000000001A
-:102A900002200078000000040220007C00000003F7
-:102AA0000620008000000002022000A400007FFF3A
-:102AB000022000A8000003FF022002240000000002
-:102AC00002200234000000000220024C000000003E
-:102AD000022002E40000FFFF0620200000000800A2
-:102AE00002238BC0000000010223800000000010C0
-:102AF000022380400000001202238080000000308A
-:102B0000022380C00000000E0C23830000086470C4
-:102B10000A238300000001570B2383000000055F98
-:102B20000A238340000000000C238340000002269B
-:102B30000B2383400000000102238380000864709F
-:102B4000022383C00000022602231480000000013B
-:102B50000A2314800000000006221000000000423A
-:102B600006222008000000C8062220000000000203
-:102B70000622B000000003300622F40000000053DB
-:102B80000422F54C000104D10622F5500000000398
-:102B90000422F55C000104D20622F5600000000367
-:102BA0000422F56C000104D30622F5700000000336
-:102BB0000422F57C000104D40622F5800000000305
-:102BC0000422F58C000104D50622F59000000003D4
-:102BD0000422F59C000104D60622F5A000000003A3
-:102BE0000422F5AC000104D70622F5B00000000372
-:102BF0000422F5BC000104D80622F5C000000046FE
-:102C00000622E2000000044004221240009004D991
-:102C100006223000000000C006226700000001000C
-:102C2000062290000000040004226B0800200569C1
-:102C3000062211F000000006042212080006058991
-:102C4000062212200000000206224000000005C0FB
-:102C50000622C000000000060422C0180006058FEE
-:102C60000622C0300000000A0422C0580006059564
-:102C70000622C0700000000A0422C0980006059BCE
-:102C80000622C0B00000000A0422C0D8000605A138
-:102C90000622C0F00000000A0422C118000605A7A1
-:102CA0000622C1300000000A0422C158000605AD0A
-:102CB0000622C1700000000A0422C198000605B374
-:102CC0000622C1B00000000A0422C1D8000605B9DE
-:102CD0000622C1F00000000A0422C218000605BF47
-:102CE0000622C2300000000A0422C258000605C5B0
-:102CF0000622C2700000000A0422C298000605CB1A
-:102D00000622C2B00000000A0422C2D8000605D183
-:102D10000622C2F00000000A0422C318000605D7EC
-:102D20000622C3300000000A0422C358000605DD55
-:102D30000622C3700000000A0422C398000605E3BF
-:102D40000622C3B00000000A0422C3D8000605E929
-:102D50000622C3F00000000A0422C418000605EF92
-:102D60000622C4300000000A0422C458000605F5FB
-:102D70000622C4700000000A0422C498000605FB65
-:102D80000622C4B00000000A0422C4D800060601CE
-:102D90000622C4F00000000A0422C5180006060737
-:102DA0000622C5300000000A0422C5580006060DA0
-:102DB0000622C5700000000A0422C598000606130A
-:102DC0000622C5B00000000A0422C5D80006061974
-:102DD0000622C5F00000000A0422C6180006061FDD
-:102DE0000622C6300000000A0422C6580006062546
-:102DF0000622C6700000000A0422C6980006062BB0
-:102E00000622C6B00000000A0422C6D80006063119
-:102E10000622C6F00000000A0422C7180006063782
-:102E20000622C7300000000A0422C7580006063DEB
-:102E30000622C7700000000A0422C7980006064355
-:102E40000622C7B00000000A0422C7D800060649BF
-:102E50000622C7F00000000A0422C8180006064F28
-:102E60000622C8300000000A0422C8580006065591
-:102E70000622C8700000000A0422C8980006065BFB
-:102E80000622C8B00000000A0422C8D80006066165
-:102E90000622C8F00000000A0422C91800060667CE
-:102EA0000622C9300000000A0422C9580006066D37
-:102EB0000622C9700000000A0422C99800060673A1
-:102EC0000622C9B00000000A0422C9D8000606790B
-:102ED0000622C9F00000000A0422CA180006067F74
-:102EE0000622CA300000000A0422CA5800060685DD
-:102EF0000622CA700000000A0422CA980006068B47
-:102F00000622CAB00000000A0422CAD800060691B0
-:102F10000622CAF00000000A0422CB180006069719
-:102F20000622CB300000000A0422CB580006069D82
-:102F30000622CB700000000A0422CB98000606A3EC
-:102F40000622CBB00000000A0422CBD8000606A956
-:102F50000622CBF00000000A0422CC18000606AFBF
-:102F60000622CC300000000A0422CC58000606B528
-:102F70000622CC700000000A0422CC98000606BB92
-:102F80000622CCB00000000A0422CCD8000606C1FC
-:102F90000622CCF00000000A0422CD18000606C765
-:102FA0000622CD300000000A0422CD58000606CDCE
-:102FB0000622CD700000000A0422CD98000606D338
-:102FC0000622CDB00000000A0422CDD8000606D9A2
-:102FD0000622CDF00000000A0422CE18000606DF0B
-:102FE0000622CE300000000A0422CE58000606E574
-:102FF0000622CE700000000A0422CE98000606EBDE
-:103000000622CEB00000000A0422CED8000606F147
-:103010000622CEF00000000A0422CF18000606F7B0
-:103020000622CF300000000A0422CF58000606FD19
-:103030000622CF700000000A0422CF980006070382
-:103040000622CFB00000000A0422CFD800060709EC
-:103050000622CFF00000000A0422D0180006070F55
-:103060000622D0300000000A0422D05800060715BE
-:103070000622D0700000000A0422D0980006071B28
-:103080000622D0B00000000A0422D0D80006072192
-:103090000622D0F00000000A0422D11800060727FB
-:1030A0000622D1300000000A0422D1580006072D64
-:1030B0000622D1700000000A0422D19800060733CE
-:1030C0000622D1B00000000A0422D1D80006073938
-:1030D0000622D1F00000000A0422D2180006073FA1
-:1030E0000622D2300000000A0422D258000607450A
-:1030F0000622D2700000000A0422D2980006074B74
-:103100000622D2B00000000A0422D2D800060751DD
-:103110000622D2F00000000A0422D3180006075746
-:103120000622D3300000000A0422D3580006075DAF
-:103130000622D3700000000A0422D3980006076319
-:103140000622D3B00000000A0422D3D80006076983
-:103150000622D3F00000000A0422D4180006076FEC
-:103160000622D4300000000A0422D4580006077555
-:103170000622D4700000000A0422D4980006077BBF
-:103180000622D4B00000000A0422D4D80006078129
-:103190000622D4F00000000A0422D5180006078792
-:1031A0000622D5300000000A0422D5580006078DFB
-:1031B0000622D5700000000A0422D5980006079365
-:1031C0000622D5B00000000A0422D5D800060799CF
-:1031D0000622D5F00000000A0422D6180006079F38
-:1031E0000622D6300000000A0422D658000607A5A1
-:1031F0000622D6700000000A0422D698000607AB0B
-:103200000622D6B00000000A0422D6D8000607B174
-:103210000622D6F00000000A0422D718000607B7DD
-:103220000622D7300000000A0422D758000607BD46
-:103230000622D7700000000A0422D798000607C3B0
-:103240000622D7B00000000A0422D7D8000607C91A
-:103250000622D7F00000000A0422D818000607CF83
-:103260000622D8300000000A0422D858000607D5EC
-:103270000622D8700000000A0422D898000607DB56
-:103280000622D8B00000000A0422D8D8000607E1C0
-:103290000622D8F00000000A0422D918000607E729
-:1032A0000622D9300000000A0422D958000607ED92
-:1032B0000622D9700000000A0422D998000607F3FC
-:1032C0000622D9B00000000A0422D9D8000607F966
-:1032D0000622D9F00000000A0422DA18000607FFCF
-:1032E0000622DA300000000A0422DA580006080537
-:1032F0000622DA700000000A0422DA980006080BA1
-:103300000622DAB00000000A0422DAD8000608110A
-:103310000622DAF00000000A0422DB180006081773
-:103320000622DB300000000A0422DB580006081DDC
-:103330000622DB700000000A0422DB980006082346
-:103340000622DBB00000000A0422DBD800060829B0
-:103350000622DBF00000000A0422DC180006082F19
-:103360000622DC300000000A0422DC580006083582
-:103370000622DC700000000A0422DC980006083BEC
-:103380000622DCB00000000A0422DCD80006084156
-:103390000622DCF00000000A0422DD1800060847BF
-:1033A0000622DD300000000A0422DD580006084D28
-:1033B0000622DD700000000A0422DD980006085392
-:1033C0000622DDB00000000A0422DDD800060859FC
-:1033D0000622DDF00000000A0422DE180006085F65
-:1033E0000622DE300000000A0422DE5800060865CE
-:1033F0000622DE700000000A0422DE980006086B38
-:103400000622DEB00000000A0422DED800060871A1
-:103410000622DEF00000000A0422DF18000608770A
-:103420000622DF300000000A0422DF580006087D73
-:103430000622DF700000000A0422DF9800060883DD
-:103440000622DFB00000000A0422DFD80006088947
-:103450000622DFF00000000A0422E0180006088FB0
-:103460000622E0300000000A0422E0580006089519
-:103470000622E0700000000A0422E0980006089B83
-:103480000622E0B00000000A0422E0D8000608A1ED
-:103490000622E0F00000000A0422E118000608A756
-:1034A0000622E1300000000A0422E158000608ADBF
-:1034B0000622E1700000000A0422E198000608B329
-:1034C0000622E1B00000000A0422E1D8000608B993
-:1034D0000622E1F000000004062215380000000278
-:1034E000062211E8000000020622F3000000000896
-:1034F00002221148000000000622590000000006C8
-:103500000622330000000002062260400000003066
-:103510000622F320000000080222114C00000000E7
-:103520000622591800000006062233080000000297
-:1035300006226100000000300622F340000000086F
-:10354000022211500000000006225930000000063F
-:103550000622331000000002062261C00000003085
-:103560000622F3600000000802221154000000004F
-:103570000622594800000006062233180000000207
-:1035800006226280000000300622F380000000085E
-:1035900002221158000000000622596000000006B7
-:1035A00006223320000000020622634000000030A3
-:1035B0000622F3A0000000080222115C00000000B7
-:1035C0000622597800000006062233280000000277
-:1035D00006226400000000300622F3C0000000084C
-:1035E000022211600000000006225990000000062F
-:1035F0000622333000000002062264C000000030C2
-:103600000622F3E00000000802221164000000001E
-:10361000062259A8000000060622333800000002E6
-:10362000062265800000003002161000000000280D
-:1036300002170008000000020217002C000000031F
-:103640000217003C000000040217004400000000C4
-:1036500002170048000000020217004C0000009012
-:1036600002170050000000900217005400800090E4
-:103670000217005808100000021700700000000632
-:1036800002170078000009FF0217007C0000076C99
-:10369000021701C4081000000217034400000001D3
-:1036A000021704000000008A0217040400000080D2
-:1036B00002170408000000810217040C00000080BB
-:1036C000021704100000008A021704140000008092
-:1036D00002170418000000810217041C000000807B
-:1036E000021704300000008A021704340000008032
-:1036F00002170438000000810217043C000000801B
-:10370000021704400000008A0217044400000080F1
-:1037100002170448000000810217044C00000080DA
-:10372000021704800000008A021704840000008051
-:1037300002170488000000810217048C000000803A
-:1037400002170038007C1004021700040000000F6C
-:10375000021701EC00000002021701F40000000251
-:10376000021701EC00000002021701F40000000241
-:10377000021701EC00000002021701F40000000231
-:10378000021701EC00000002021701F40000000221
-:10379000021701EC00000002021701F40000000211
-:1037A000021701EC00000002021701F40000000201
-:1037B000021701EC00000002021701F400000002F1
-:1037C000021701EC00000002021701F400000002E1
-:1037D0000616402400000002021640700000001C83
-:1037E000021642080000000102164210000000010B
-:1037F00002164220000000010216422800000001CB
-:10380000021642300000000102164238000000019A
-:1038100002164260000000020C16401C0003D0900B
-:103820000A16401C0000009C0B16401C0000027190
-:103830000216403000000028021640340000002C20
-:1038400002164038000000300216404400000020FC
-:103850000216400000000001021640D800000001DE
-:1038600002164008000000010216400C0000000192
-:103870000216401000000001021642400000000045
-:1038800002164248000000000616427000000002C6
-:1038900002164250000000000216425800000000CC
-:1038A0000616428000000002021660080000121492
-:1038B0000216600C000012000216601000001204D4
-:1038C0000216601C0000FFFF021660200000FFFFD0
-:1038D000021660240000FFFF021660280000FFFFB0
-:1038E00002166038000000200216603C0000001044
-:1038F0000616604000000002021660480000002327
-:103900000216604C000000240216605000000025E2
-:1039100002166054000000260216605800000027BE
-:103920000216605C000000110216606000000000DA
-:10393000021660640000002B021660680000002C74
-:103940000216606C0000002D02166070000000EC92
-:103950000216607400000000021660780000002962
-:103960000216607C0000002A021660800000002F12
-:10397000061660840000000D021660B80000000109
-:10398000061660BC00000008021660DC00000001A2
-:10399000061660E000000004021660F0000000015E
-:1039A000061660F40000000302166100000000012A
-:1039B000061661040000002D021661B80000000127
-:1039C000061661BC00000008021661DC0000000160
-:1039D000061661E000000004021661F0000000011C
-:1039E000061661F4000000030216620000000001E8
-:1039F000061662040000000D0216623807FFFFFF82
-:103A00000216623C0000007F0216624007FFFFFFC3
-:103A1000021662440000003F0116624800000000E8
-:103A20000116624C00000000011662500000000008
-:103A300001166254000000000116625800000000E8
-:103A40000116625C000000000116626000000000C8
-:103A500001166264000000000116626800000000A8
-:103A60000116626C00000000011662700000000088
-:103A70000116627400000000011662780000000068
-:103A80000116627C00000000011662D400000000F4
-:103A9000021662D80000FFFF021662DC0000FFFF82
-:103AA000021662E00000FFFF021662E40000FFFF62
-:103AB0000C166000000003E80A1660000000000118
-:103AC0000B16600000000003021680400000000694
-:103AD0000216804400000005021680480000000A1B
-:103AE0000216804C000000050216805400000002FF
-:103AF000021680CC00000004021680D000000004F2
-:103B0000021680D400000004021680D800000004D1
-:103B1000021680DC00000004021680E000000004B1
-:103B2000021680E400000004021680E80000000491
-:103B30000216880400000006021680300000007C97
-:103B4000021680340000003D021680380000003F5D
-:103B50000216803C0000009C0216E6E800006000AF
-:103B60000216E6EC000060000216E6F000006000BD
-:103B70000216E6F40000600002168234000025E41C
-:103B8000021682380000800002168094000025E3AF
-:103B9000021681F400000C08021681F800000040B3
-:103BA000021681FC000001000216820000000020C5
-:103BB000021682040000001702168208000000802E
-:103BC0000216820C000002000216821000000000A3
-:103BD0000216823C0000001302168220008F008F24
-:103BE0000216821C008F008F021680F00000000772
-:103BF0000216821801FF01FF0216821401FF01FF65
-:103C0000061680F4000000020216811C0000000568
-:103C10000216812000000005021681240000000524
-:103C200002168128000000080216812C0000000600
-:103C300002168130000000070616813400000004DF
-:103C4000021680FC000000000616814400000002FD
-:103C50000216814C00000004021681500000000191
-:103C6000021681540000000202168158000000056F
-:103C70000216815C0000000502168160000000054C
-:103C80000216816400000005021681680000000829
-:103C900002168100000000000216816C0000000680
-:103CA00002168170000000070616817400000006ED
-:103CB0000216818C000000040216819000000001B1
-:103CC0000216810400000000021681940000000228
-:103CD00002168198000000050216819C0000000574
-:103CE000021681A000000005021681A40000000554
-:103CF000021681A800000008021681AC0000000630
-:103D0000021681B000000007061681B40000000210
-:103D10000216810800000000061681BC00000004A5
-:103D2000021681CC00000004021681D000000001C0
-:103D3000021681D400000002021681D8000000059E
-:103D4000021681DC00000005021681E0000000057B
-:103D50000216810C00000004021681E40000000538
-:103D6000021681E800000008021681EC000000063F
-:103D7000021681F000000007021681100000000109
-:103D800002168114000000020216811800000005CE
-:103D90000216809C0000004C021680A00000004C1F
-:103DA000061680C400000002021680A40000000075
-:103DB000021680A800000000021680AC0000004C33
-:103DC000061680B0000000050216E6F800000204A6
-:103DD00002168240003F003F02168244003F003F2F
-:103DE00006168290000000040216824800800080BF
-:103DF0000216824C008000800216825001000100F1
-:103E000002168254010001000616825800000002CA
-:103E100002168260004000400216826400400040AA
-:103E2000021682681E001E000216826C1E001E0012
-:103E3000021682704000400002168274400040006A
-:103E400002168278800080000216827C800080004A
-:103E500002168280200020000216828420002000AA
-:103E60000616828800000002021680900000004BB7
-:103E700002168060000001400216806400000140CC
-:103E8000061680880000000202168068000000000C
-:103E90000216806C0000000002168070000000C056
-:103EA00006168074000000050216880C010101014D
-:103EB000021688100101200402168814200810013F
-:103EC00002168818010101200216881C0101010157
-:103ED00002168820010120040216882420081001FF
-:103EE00002168828010101200216882C20081001E2
-:103EF00002168830010101200216883401010101F7
-:103F000002168838010120040216883C200810019E
-:103F100002168840010101200216884401010101B6
-:103F200002168848010120040216E6BC00000000C9
-:103F30000216E6C0000000020216E6C400000004FB
-:103F40000216E6C8000000060216E7940000000111
-:103F5000021680EC000000FF0214000000000001C7
-:103F60000215C024000000000215C0EC0000000192
-:103F70000215C0F0000000010615C100000000029B
-:103F800002140004000000010214000800000001F7
-:103F90000214000C000000010214003000000001B7
-:103FA000021400340000000102140040000000016F
-:103FB000021400440000FFFF061400040000000388
-:103FC0000214000000000000060280000000200033
-:103FD0000202005800000032020200A00315002077
-:103FE000020200A403150020020200A80100003014
-:103FF000020200AC08100000020200B0000000360F
-:10400000020200B400000030020200B800000031DB
-:10401000020200BC00000002020200C00000000515
-:10402000020200C400000002020200C800000002F8
-:10403000020200D000000007020200DC00000000C5
-:10404000020200E000000005020200E4000000039C
-:10405000020200F000000001020200FC0000000665
-:1040600002020120000000000202013400000002F0
-:10407000020201B0000000010202020C0000000177
-:1040800002020214000000010202021800000002F5
-:1040900002020404000000010202040C00000040BF
-:1040A00002020410000000400202041C0000000490
-:1040B000020204200000002002020424000000028A
-:1040C0000202042800000020060205000000001281
-:1040D00004020480002008BF020200600000000FFC
-:1040E00002020064000000070202006800000000F5
-:1040F0000202006C0000000E020200700000000EC0
-:104100000602007400000003020200F40000000434
-:104110000202000400000001020200080000000189
-:104120000202000C00000001020200100000000169
-:104130000202001400000001020200180000000149
-:104140000202001C00000001020200200000000129
-:104150000202002400000001020200280000000109
-:104160000202002C000000010202003000000001E9
-:1041700002020034000000010202003800000001C9
-:104180000202003C000000010202004000000001A9
-:104190000202004400000001020200480000000189
-:1041A0000202004C00000001020200500000000169
-:1041B00002020108000000C802020118000000020B
-:1041C000020201C400000000020201CC0000000055
-:1041D000020201D400000002020201DC0000000221
-:1041E000020201E4000000FF020201EC000000FFF7
-:1041F00002020100000000000202010C000000C8E1
-:104200000202011C00000002020201C800000000BE
-:10421000020201D000000000020201D800000002EA
-:10422000020201E000000002020201E8000000FFBB
-:10423000020201F0000000FF020201040000002061
-:1042400002020108000000C802020118000000027A
-:10425000020201C400000000020201CC00000000C4
-:10426000020201D400000002020201DC0000000290
-:10427000020201E4000000FF020201EC000000FF66
-:1042800002020100000000100202010C000000C840
-:104290000202011C00000002020201C8000000002E
-:1042A000020201D000000000020201D8000000025A
-:1042B000020201E000000002020201E8000000FF2B
-:1042C000020201F0000000FF0202010400000030C1
-:1042D00002020108000000C80202011800000002EA
-:1042E000020201C400000000020201CC0000000034
-:1042F000020201D400000002020201DC0000000200
-:10430000020201E4000000FF020201EC000000FFD5
-:1043100002020100000000400202010C000000C87F
-:104320000202011C00000002020201C8000000009D
-:10433000020201D000000000020201D800000002C9
-:10434000020201E000000002020201E8000000FF9A
-:10435000020201F0000000FF020201040000006000
-:1043600002020108000000C8020201180000000259
-:10437000020201C400000000020201CC00000000A3
-:10438000020201D400000002020201DC000000026F
-:10439000020201E4000000FF020201EC000000FF45
-:1043A00002020100000000500202010C000000C8DF
-:1043B0000202011C00000002020201C8000000000D
-:1043C000020201D000000000020201D80000000239
-:1043D000020201E000000002020201E8000000FF0A
-:1043E000020201F0000000FF020201040000007060
-:1043F0000728040000B50000082807B8000908DFF6
-:10440000072C000028C30000072C800036720A31F8
-:10441000072D000035B617CE072D80003B00253C48
-:10442000072E0000366D33FD072E80001AA8419933
-:10443000082EBF20281C08E1012800000000000011
-:10444000012800040000000001280008000000000E
-:104450000128000C000000000128001000000000EE
-:1044600001280014000000000228002000000001C4
-:104470000228002400000002022800280000000397
-:104480000228002C00000000022800300000000478
-:10449000022800340000000102280038000000005B
-:1044A0000228003C00000001022800400000000437
-:1044B000022800440000000002280048000000011B
-:1044C0000228004C000000030228005000000000F9
-:1044D00002280054000000010228005800000004D7
-:1044E0000228005C000000000228006000000001BB
-:1044F0000228006400000003022800680000000099
-:104500000228006C00000001022800700000000476
-:104510000228007400000000022800780000000457
-:104520000228007C00000003062800800000000232
-:10453000022800A400007FFF022800A8000003FF5B
-:1045400002280224000000000228023400000000BB
-:104550000228024C00000000022802E40000FFFFD5
-:104560000628200000000800022B8BC0000000017C
-:10457000022B800000000000022B80400000001889
-:10458000022B80800000000C022B80C0000000661F
-:104590000C2B8300000864700A2B83000000015775
-:1045A0000B2B83000000055F0A2B834000000000F6
-:1045B0000C2B8340000002260B2B834000000001DF
-:1045C000022B838000086470022B83C00000022647
-:1045D000022B1480000000010A2B14800000000050
-:1045E000022B944000000001062B944800000002BA
-:1045F000062A9A7000000004042A9A80000408E346
-:10460000062A9A9000000002042A9A98000208E7FD
-:10461000062A900000000048062A2008000000C872
-:10462000062A200000000002062A912800000086C9
-:10463000062AC00000000120062A9348000000035B
-:10464000042A9354000108E9062A9FB000000002E2
-:10465000042A9418000208EA042A9CD0000108ECFD
-:10466000062A9CD400000011042A9D20008F08ED2A
-:10467000062A9F5C00000005042A30000002097C25
-:10468000062A300800000100062A40400000001001
-:10469000042A40000010097E042A84080002098EC2
-:1046A000042ACF4000040990042ACF600002099434
-:1046B000062A9FA000000004062A600000000540B2
-:1046C000062A9D1800000002062AB00000000050D3
-:1046D000062ABB7000000070062ABB6800000002BA
-:1046E000062AB94800000004062AD000000008008D
-:1046F000062AC48000000150062A942000000032DF
-:10470000062A502000000002062A50300000000255
-:10471000062A500000000002062A50100000000285
-:10472000022A520800000001042A9AA000020996F9
-:10473000062A95B000000022042A96380001099844
-:10474000062A963C00000003062A96E0000000229C
-:10475000042A976800010999062A976C0000000353
-:10476000062A981000000022042A98980001099A4D
-:10477000062A989C00000003062A994000000022A7
-:10478000042A99C80001099B062A99CC000000035D
-:10479000062ABB5800000002062AC9C000000150CA
-:1047A000062A94E800000032062A50280000000281
-:1047B000062A503800000002062A500800000002B5
-:1047C000062A501800000002022A520C00000001C4
-:1047D000042A9AA80002099C062A96480000002292
-:1047E000042A96D00001099E062A96D400000003F0
-:1047F000062A977800000022042A98000001099FE9
-:10480000062A980400000003062A98A80000002247
-:10481000042A9930000109A0062A993400000003F7
-:10482000062A99D800000022042A9A60000109A1F2
-:10483000062A9A6400000003062ABB6000000002FA
-:10484000022ACF0000000000042A9AB0001009A23A
-:10485000062A50480000000E022ACF040000000083
-:10486000042A9AF0001009B2062A50800000000EB7
-:10487000022ACF0800000000042A9B30001009C261
-:10488000062A50B80000000E022ACF0C00000000DB
-:10489000042A9B70001009D2062A50F00000000E76
-:1048A000022ACF1000000000042A9BB0001009E289
-:1048B000062A51280000000E022ACF140000000032
-:1048C000042A9BF0001009F2062A51600000000E35
-:1048D000022ACF1800000000042A9C3000100A02AF
-:1048E000062A51980000000E022ACF1C000000008A
-:1048F000042A9C7000100A12062A51D00000000EF3
-:104900000210100800000001021010500000000109
-:10491000021010000003D000021010040000003D3F
-:104920000910180002000A220910110000100C22C0
-:1049300006101140000000080910116000100C3230
-:10494000061011A00000001806102400000000E06E
-:104950000210201C000000000210202000000001B6
-:10496000021020C00000000202102004000000011C
-:104970000210200800000001021030D800000001E1
-:1049800009103C0000050C420910380000050C47D6
-:104990000910392000050C4C09103B0000050C5192
-:1049A00006104C000000010002104028000000101A
-:1049B0000210404400003FFF021040580028000051
-:1049C000021040840084924A021040580000000007
-:1049D00002104138000000010210413800000001BF
-:1049E00002104138000000010210413800000001AF
-:1049F000021041380000000102104138000000019F
-:104A0000021041380000000102104138000000018E
-:104A10000212049001F680400212051400003C10BE
-:104A200002120494FFFFFFFF02120498FFFFFFFF32
-:104A30000212049CFFFFFFFF021204A0FFFFFFFF12
-:104A4000021204A4FFFFFFFF021204A8FFFFFFFFF2
-:104A5000021204ACFFFFFFFF021204B0FFFFFFFFD2
-:104A6000021204B8FFFFFFFF021204BCFFFFFFFFAA
-:104A7000021204C0FFFFFFFF021204C4FFFFFFFF8A
-:104A8000021204C8FFFFFFFF021204CCFFFFFFFF6A
-:104A9000021204D0FFFFFFFF021204D8FFFFFFFF46
-:104AA000021204DCFFFFFFFF021204E0FFFFFFFF22
-:104AB000021204E4FFFFFFFF021204E8FFFFFFFF02
-:104AC000021204ECFFFFFFFF021204F0FFFFFFFFE2
-:104AD000021204F4FFFFFFFF021204F8FFFFFFFFC2
-:104AE000021204FCFFFFFFFF02120500FFFFFFFFA1
-:104AF00002120504FFFFFFFF02120508FFFFFFFF80
-:104B00000212050CFFFFFFFF02120510FFFFFFFF5F
-:104B1000021204D4F800C000021204B4F0005000E5
-:104B200002120390000000080212039C000000081B
-:104B3000021203A000000008021203A400000002F9
-:104B4000021203BC00000004021203C000000005B2
-:104B5000021203C400000004021203D0000000008F
-:104B60000212036C00000001021201BC00000040B0
-:104B7000021201C000001808021201C4000008035C
-:104B8000021201C800000803021201CC000000401C
-:104B9000021201D000000003021201D40000080339
-:104BA000021201D800000803021201DC0000080311
-:104BB000021201E000010003021201E400000803F8
-:104BC000021201E800000803021201EC00000003D9
-:104BD000021201F000000003021201F400000003C1
-:104BE000021201F800000003021201FC00000003A1
-:104BF000021202000000000302120204000000037F
-:104C000002120208000000030212020C000000035E
-:104C1000021202100000000302120214000000033E
-:104C200002120218000000030212021C000000031E
-:104C300002120220000000030212022400000003FE
-:104C400002120228000024030212022C0000002F8E
-:104C500002120230000000090212023400000019A2
-:104C600002120238000001840212023C000001839B
-:104C70000212024000000306021202440000001962
-:104C800002120248000000060212024C0000030655
-:104C90000212025000000306021202540000030632
-:104CA0000212025800000C860212025C0000030689
-:104CB00002120260000003060212026400000006F5
-:104CC00002120268000000060212026C00000006D8
-:104CD00002120270000000060212027400000006B8
-:104CE00002120278000000060212027C0000000698
-:104CF0000212028000000006021202840000000678
-:104D000002120288000000060212028C0000000657
-:104D10000212029000000006021202940000000637
-:104D200002120298000000060212029C0000000617
-:104D3000021202A000000306021202A400000013E7
-:104D4000021202A800000006021202B000001004C5
-:104D5000021202B400001004021203240010644086
-:104D60000212032800106440021205B40000000182
-:104D7000021205F800000040021205FC00000019B4
-:104D800002120600000000010212066C0000000181
-:104D9000021201B000000001021207D80000000357
-:104DA000021207D800000003021207D80000000317
-:104DB000021207D800000003021207D80000000307
-:104DC000021207D800000003021207D800000003F7
-:104DD000021207D8000000030600A0000000000C2B
-:104DE0000200A050000000000200A05400000000DB
-:104DF0000200A0EC555400000200A0F05555555596
-:104E00000200A0F4000055550200A0F8F0000000D8
-:104E10000200A0FC555400000200A1005555555554
-:104E20000200A104000055550200A108F000000096
-:104E30000200A19C000000000200A1A000010000EF
-:104E40000200A1A4000050140200A1A8000000006C
-:104E50000200A6A8000000000200A6AC00000000AE
-:104E60000200A6D0000000000200A45C00000C00BC
-:104E70000200A61C000000030200A070FFF55FFF07
-:104E80000200A0740000FFFF0200A078F00003E021
-:104E90000200A07C000000000200A0800000A00032
-:104EA0000600A084000000050200A0980FE00000AA
-:104EB0000600A09C000000070200A0B8000004004B
-:104EC0000600A0BC000000030200A0C80000100003
-:104ED0000600A0CC000000030200A0D800004000A3
-:104EE0000600A0DC000000030200A0E800010000B2
-:104EF0000600A22C000000040200A688000000FCAE
-:104F00000600A68C000000070200A6F400000000C6
-:104F10000200A10CFF5C00000200A110FFF55FFF82
-:104F20000200A1140000FFFF0200A118F00003E03E
-:104F30000200A11C000000000200A1200000A0004F
-:104F40000600A124000000050200A1380FE00000C7
-:104F50000600A13C000000070200A1580000080064
-:104F60000600A15C000000030200A1680000200010
-:104F70000600A16C000000030200A1780000800080
-:104F80000600A17C000000030200A18800020000CE
-:104F90000600A23C000000040200A6B0000000FCD5
-:104FA0000600A6B4000000070200A6F800000000FA
-:104FB0000200A030000000000200A0340000000049
-:104FC0000200A038000000000200A03C0000000029
-:104FD0000200A040000000000200A0440000000009
-:104FE0000200A048000000000200A04C00000000E9
-:104FF000020090C40000E000020090CC0000F3002A
-:10500000020090D400000003020091A00000000103
-:105010000600917000000003020090EC00006000A8
-:10502000020090F400007300020090FC00000003F6
-:10503000020091A800000001060091880000000312
-:10504000020091000000400002009108000053009F
-:105050000200911000000004020091AC0000000169
-:1050600006009194000000020200919C00000001E3
-:10507000020090D800006000020090E00000730081
-:10508000020090E800000003020091A4000000016B
-:105090000200917C000000010200918000000001EC
-:1050A000020091840000000002009128000003002B
-:1050B0000200916C0003F0080200912C0000030034
-:1050C0000200913000000300020091340000030050
-:1050D00002009138000003000200913C0000030030
-:1050E00002009140000003000200942C0000000127
-:1050F000020094300000000102009434000000011E
-:105100000200942C00000001020094300000000115
-:1051100002009434000000010200942C0000000101
-:1051200002009430000000010200943400000001ED
-:105130000200942C000000010200943000000001E5
-:1051400002009434000000010200942C00000001D1
-:1051500002009430000000010200943400000001BD
-:105160000200942C000000010200943000000001B5
-:1051700002009434000000010200942C00000001A1
-:10518000020094300000000102009434000000018D
-:105190000200942C00000001020094300000000185
-:1051A00002009434000000010213003C000061A8DA
-:1051B00006130108000000030213010400000000B0
-:1051C0000213013400000000061301080000000370
-:1051D000021301040000000002130134000000006B
-:1051E0000613010800000003021301040000000080
-:1051F0000213013400000000061301080000000340
-:10520000021301040000000002130134000000003A
-:10521000061301080000000302130104000000004F
-:10522000021301340000000006130108000000030F
-:10523000021301040000000002130134000000000A
-:10524000061301080000000302130104000000001F
-:1052500002130134000000000613010800000003DF
-:1052600002130104000000000213013400000000DA
-:10527000021100B8000000010216E6E8000020005C
-:105280000216E6EC000020000216E6F0000065556C
-:105290000216E6F400006555021681500000000079
-:1052A00002168174000000010216817800000001DE
-:1052B0000216817C000000010216818000000001BE
-:1052C000021681840000000102168188000000019E
-:1052D000021681B400000001021681B8000000012E
-:1052E000021681BC00000001021681C0000000010E
-:1052F000021681C400000001021681C800000001EE
-:1053000002168110000000000216824000BF00BF9C
-:1053100006168244000000020216824C00BF00BF45
-:105320000216E6C4000000010216E6C800000003F1
-:105330000216E79400000000042ACF40000A0C5631
-:105340000000000000000000000000340000000029
-:10535000000000000000000000000000000000004D
-:10536000000000000000000000000000000000003D
-:1053700000000000003400350000000000000000C4
-:10538000000000000000000000000000000000001D
-:10539000000000000000000000000000000000000D
-:1053A0000035006000000000000000000000000068
-:1053B00000000000000000000000000000000000ED
-:1053C00000000000000000000000000000600091EC
-:1053D0000000000000000000009100950095009979
-:1053E0000099009D009D00A100A100A500A500A9B5
-:1053F00000A900AD00AD00B100B100B50000000093
-:10540000000000000000000000000000000000009C
-:10541000000000000000000000000000000000008C
-:105420000000000000B503100310031A031A032440
-:105430000324032B032B03320332033903390340C4
-:10544000034003470347034E034E03550355035CD4
-:10545000000000000000000000000000000000004C
-:10546000000000000000000000000000000000003C
-:10547000000000000000000000000000000000002C
-:10548000000000000000000000000000000000001C
-:10549000000000000000000000000000000000000C
-:1054A00000000000000000000000000000000000FC
-:1054B00000000000000000000000000000000000EC
-:1054C00000000000000000000000000000000000DC
-:1054D00000000000000000000000000000000000CC
-:1054E00000000000000000000000000000000000BC
-:1054F00000000000000000000000000000000000AC
-:10550000035C035D0000000000000000035D035E1B
-:10551000035E035F035F0360036003610361036273
-:105520000362036303630364036403650000000014
-:10553000000000000000000000000000000000006B
-:10554000000000000000000000000000000000005B
-:1055500000000000000000000365036C036C03788A
-:105560000378038400000000000000000000000039
-:10557000000000000000000000000000000000002B
-:10558000000000000000000000000000000000001B
-:10559000000000000000000000000000000000000B
-:1055A00000000000000000000000000000000000FB
-:1055B00003840385000000000000000000000000DC
-:1055C00000000000000000000000000000000000DB
-:1055D000000000000000000000000000038503B090
-:1055E00000000000000000000000000000000000BB
-:1055F00000000000000000000000000000000000AB
-:10560000000000000000000003B003DF0000000005
-:10561000000000000000000000000000000000008A
-:10562000000000000000000000000000000000007A
-:105630000000000003DF040E000000000000000076
-:10564000040E04150415041C041C04230423042A5A
-:10565000042A0431043104380438043F043F04466A
-:105660000446047900000000000000000479047D75
-:10567000047D048104810485048504890489048DE2
-:10568000048D04910491049504950499049904E807
-:1056900004E804FE04FE0514051405160516051895
-:1056A0000518051A051A051C051C051E051E0520F2
-:1056B000052005220522052405240690000000008F
-:1056C00000000000069006950695069A069A069F29
-:1056D000069F06A406A406A906A906AE06AE06B352
-:1056E00006B306B806B806B90000000000000000C6
-:1056F00000000000000000000000000000000000AA
-:105700000000000000000000000000000000000099
-:1057100006B906DD000000000000000006DD06DF1F
-:1057200006DF06E106E106E306E306E506E506E731
-:1057300006E706E906E906EB06EB06ED06ED0702CD
-:105740000702070507050708000000000000000029
-:105750000000000000000000000000000000000049
-:1057600000000000000000000708074C00000000D7
-:105770000000000000000000000000000000000029
-:105780000000000000000000000000000000000019
-:1057900000000000074C07DE0000000000000000D1
-:1057A00000000000000000000000000000000000F9
-:1057B00000000000000000000000000000000000E9
-:1057C00007DE07EC00000000000000000000000001
-:1057D00000000000000000000000000000000000C9
-:1057E00000000000000000000000000007EC082995
-:1057F0000000000000000000082908320832083BC1
-:10580000083B08440844084D084D08560856085FF0
-:10581000085F086808680871087108D108D108E6AF
-:1058200008E608FB08FB08FE08FE09010901090457
-:10583000090409070907090A090A090D090D0910D0
-:10584000091009130913091C0000000000000000E2
-:105850000000000000000000000000000000000048
-:105860000000000000000000000000000000000038
-:10587000091C0922000000000000000000000000D8
-:105880000000000000000000000000000000000018
-:1058900000000000000000000000000009220927AD
-:1058A00000000000000000000000000000000000F8
-:1058B00000000000000000000000000000000000E8
-:1058C00000000000000000000927092D0000000072
-:1058D00000000000092D092E092E092F092F09307B
-:1058E00009300931093109320932093309330934E0
-:1058F000093409350000000000000000000000002D
-:105900000000000000000000000000000000000097
-:105910000000000000000000000000000000000087
-:10592000093509A6000000000000000009A609A72B
-:1059300009A709A809A809A909A909AA09AA09ABD7
-:1059400009AB09AC09AC09AD09AD09AE09AE09C294
-:1059500009C209D509D509E909E909EA09EA09EB02
-:1059600009EB09EC09EC09ED09ED09EE09EE09EF87
-:1059700009EF09F009F009F109F10A10000000002F
-:10598000000000000A100A130A130A160A160A1960
-:105990000A190A1C0A1C0A1F0A1F0A220A220A25BF
-:1059A0000A250A280A280A29000000000000000031
-:1059B0000A290A2C0A2C0A2F0A2F0A320A320A351F
-:1059C0000A350A380A380A3B0A3B0A3E0A3E0A41AF
-:1059D0000A410A4200000000000000000000000030
-:1059E00000000000000000000000000000000000B7
-:1059F0000000000000000000000000000A420A5AF7
-:105A00000000000000000000000000000000000096
-:105A10000000000000000000000000000000000086
-:105A200000000000000000000A5A0A5B00000000AD
-:105A30000000000000000000000000000000000066
-:105A40000000000000000000000000000000000056
-:105A5000000000000000000000010000000207003C
-:105A600000030E000004150000051C0000062300C2
-:105A700000072A000008310000093800000A3F0032
-:105A8000000B4600000C4D00000D5400000E5B00A2
-:105A9000000F620000106900001170000012770012
-:105AA00000137E000014850000158C000016930082
-:105AB00000179A000018A1000019A800001AAF00F2
-:105AC000001BB600001CBD00001DC400001ECB0062
-:105AD000001FD2000000D90000002000000040009C
-:105AE00000006000000080000000A0000000C00076
-:105AF0000000E00000010000000120000001400063
-:105B000000016000000180000001A0000001C00051
-:105B10000001E0000002000000022000000240003E
-:105B200000026000000280000002A0000002C0002D
-:105B30000002E0000003000000032000000340001A
-:105B400000036000000380000003A0000003C00009
-:105B50000003E000000400000004200000044000F6
-:105B600000046000000480000004A0000004C000E5
-:105B70000004E000000500000005200000054000D2
-:105B800000056000000580000005A0000005C000C1
-:105B90000005E000000600000006200000064000AE
-:105BA00000066000000680000006A0000006C0009D
-:105BB0000006E0000007000000072000000740008A
-:105BC00000076000000780000007A0000007C00079
-:105BD0000007E00000080000000820000008400066
-:105BE00000086000000880000008A0000008C00055
-:105BF0000008E00000090000000920000009400042
-:105C000000096000000980000009A0000009C00030
-:105C10000009E000000A0000000A2000000A40001D
-:105C2000000A6000000A8000000AA000000AC0000C
-:105C3000000AE000000B0000000B2000000B4000F9
-:105C4000000B6000000B8000000BA000000BC000E8
-:105C5000000BE000000C0000000C2000000C4000D5
-:105C6000000C6000000C8000000CA000000CC000C4
-:105C7000000CE000000D0000000D2000000D4000B1
-:105C8000000D6000000D8000000DA000000DC000A0
-:105C9000000DE000000E0000000E2000000E40008D
-:105CA000000E6000000E8000000EA000000EC0007C
-:105CB000000EE000000F0000000F2000000F400069
-:105CC000000F6000000F8000000FA000000FC00058
-:105CD000000FE00000100000001020000010400045
-:105CE00000106000001080000010A0000010C00034
-:105CF0000010E00000110000001120000011400021
-:105D000000116000001180000011A0000011C0000F
-:105D10000011E000001200000012200000124000FC
-:105D200000126000001280000012A0000012C000EB
-:105D30000012E000001300000013200000134000D8
-:105D400000136000001380000013A0000013C000C7
-:105D50000013E000001400000014200000144000B4
-:105D600000146000001480000014A0000014C000A3
-:105D70000014E00000150000001520000015400090
-:105D800000156000001580000015A0000015C0007F
-:105D90000015E0000016000000162000001640006C
-:105DA00000166000001680000016A0000016C0005B
-:105DB0000016E00000170000001720000017400048
-:105DC00000176000001780000017A0000017C00037
-:105DD0000017E00000180000001820000018400024
-:105DE00000186000001880000018A0000018C00013
-:105DF0000018E00000190000001920000019400000
-:105E000000196000001980000019A0000019C000EE
-:105E10000019E000001A0000001A2000001A4000DB
-:105E2000001A6000001A8000001AA000001AC000CA
-:105E3000001AE000001B0000001B2000001B4000B7
-:105E4000001B6000001B8000001BA000001BC000A6
-:105E5000001BE000001C0000001C2000001C400093
-:105E6000001C6000001C8000001CA000001CC00082
-:105E7000001CE000001D0000001D2000001D40006F
-:105E8000001D6000001D8000001DA000001DC0005E
-:105E9000001DE000001E0000001E2000001E40004B
-:105EA000001E6000001E8000001EA000001EC0003A
-:105EB000001EE000001F0000001F2000001F400027
-:105EC000001F6000001F8000001FA000001FC00016
-:105ED000001FE00000200000002020000020400003
-:105EE00000206000002080000020A0000020C000F2
-:105EF0000020E000002100000021200000214000DF
-:105F000000216000002180000021A0000021C000CD
-:105F10000021E000002200000022200000224000BA
-:105F200000226000002280000022A0000022C000A9
-:105F30000022E00000230000002320000023400096
-:105F400000236000002380000023A0000023C00085
-:105F50000023E00000240000002420000024400072
-:105F600000246000002480000024A0000024C00061
-:105F70000024E0000025000000252000002540004E
-:105F800000256000002580000025A0000025C0003D
-:105F90000025E0000026000000262000002640002A
-:105FA00000266000002680000026A0000026C00019
-:105FB0000026E00000270000002720000027400006
-:105FC00000276000002780000027A0000027C000F5
-:105FD0000027E000002800000028200000284000E2
-:105FE00000286000002880000028A0000028C000D1
-:105FF0000028E000002900000029200000294000BE
-:1060000000296000002980000029A0000029C000AC
-:106010000029E000002A0000002A2000002A400099
-:10602000002A6000002A8000002AA000002AC00088
-:10603000002AE000002B0000002B2000002B400075
-:10604000002B6000002B8000002BA000002BC00064
-:10605000002BE000002C0000002C2000002C400051
-:10606000002C6000002C8000002CA000002CC00040
-:10607000002CE000002D0000002D2000002D40002D
-:10608000002D6000002D8000002DA000002DC0001C
-:10609000002DE000002E0000002E2000002E400009
-:1060A000002E6000002E8000002EA000002EC000F8
-:1060B000002EE000002F0000002F2000002F4000E5
-:1060C000002F6000002F8000002FA000002FC000D4
-:1060D000002FE000003000000030200000304000C1
-:1060E00000306000003080000030A0000030C000B0
-:1060F0000030E0000031000000312000003140009D
-:1061000000316000003180000031A0000031C0008B
-:106110000031E00000320000003220000032400078
-:1061200000326000003280000032A0000032C00067
-:106130000032E00000330000003320000033400054
-:1061400000336000003380000033A0000033C00043
-:106150000033E00000340000003420000034400030
-:1061600000346000003480000034A0000034C0001F
-:106170000034E0000035000000352000003540000C
-:1061800000356000003580000035A0000035C000FB
-:106190000035E000003600000036200000364000E8
-:1061A00000366000003680000036A0000036C000D7
-:1061B0000036E000003700000037200000374000C4
-:1061C00000376000003780000037A0000037C000B3
-:1061D0000037E000003800000038200000384000A0
-:1061E00000386000003880000038A0000038C0008F
-:1061F0000038E0000039000000392000003940007C
-:1062000000396000003980000039A0000039C0006A
-:106210000039E000003A0000003A2000003A400057
-:10622000003A6000003A8000003AA000003AC00046
-:10623000003AE000003B0000003B2000003B400033
-:10624000003B6000003B8000003BA000003BC00022
-:10625000003BE000003C0000003C2000003C40000F
-:10626000003C6000003C8000003CA000003CC000FE
-:10627000003CE000003D0000003D2000003D4000EB
-:10628000003D6000003D8000003DA000003DC000DA
-:10629000003DE000003E0000003E2000003E4000C7
-:1062A000003E6000003E8000003EA000003EC000B6
-:1062B000003EE000003F0000003F2000003F4000A3
-:1062C000003F6000003F8000003FA000003FC00092
-:1062D000003FE000003FE00100000000000001FF7F
-:1062E0000000020000007FF800007FF800000A9420
-:1062F00000001500000000010000FF000000000089
-:106300000000FF00000000000000FF00000000008F
-:106310000000FF00000000000000FF00000000007F
-:106320000000FF00000000000000FF00000000006F
-:106330000000FF00000000000000FF00000000005F
-:106340000000FF00000000000000FF00000000004F
-:106350000000FF00000000000000FF00000000003F
-:106360000000FF00000000000000FF00000000002F
-:106370000000FF00000000000000FF00000000001F
-:106380000000FF00000000000000FF00000000000F
-:106390000000FF00000000000000FF0000000000FF
-:1063A0000000FF00000000000000FF0000000000EF
-:1063B0000000FF00000000000000FF0000000000DF
-:1063C0000000FF00000000000000FF0000000000CF
-:1063D0000000FF00000000000000FF0000000000BF
-:1063E0000000FF00000000000000FF0000000000AF
-:1063F0000000FF00000000000000FF00000000009F
-:106400000000FF00000000000000FF00000000008E
-:106410000000FF00000000000000FF00000000007E
-:106420000000FF00000000000000FF00000000006E
-:106430000000FF00000000000000FF00000000005E
-:106440000000FF00000000000000FF00000000004E
-:106450000000FF00000000000000FF00000000003E
-:106460000000FF00000000000000FF00000000002E
-:106470000000FF00000000000000FF00000000001E
-:106480000000FF00000000000000FF00000000000E
-:106490000000FF00000000000000FF0000000000FE
-:1064A0000000FF00000000000000FF0000000000EE
-:1064B0000000FF00000000000000FF0000000000DE
-:1064C0000000FF00000000000000FF0000000000CE
-:1064D0000000FF00000000000000FF0000000000BE
-:1064E0000000FF00000000000000FF0000000000AE
-:1064F0000000FF00000000000000FF00000000009E
-:106500000000FF00000000000000FF00000000008D
-:106510000000FF00000000000000FF00000000007D
-:106520000000FF00000000000000FF00000000006D
-:106530000000FF000000000000000000140AFF003F
-:106540000000000100000000002010010000000019
-:106550000100900000000100000090020000900483
-:1065600000009006000090080000900A0000900CC7
-:106570000000900E00009010000090120000901497
-:1065800000009016000090180000901A0000901C67
-:106590000000901E00009020000090220000902437
-:1065A00000009026000090280000902A0000902C07
-:1065B0000000902E000090300000903200009034D7
-:1065C00000009036000090380000903A0000903CA7
-:1065D0000000903E00009040000090420000904477
-:1065E00000009046000090480000904A0000904C47
-:1065F0000000904E00009050000090520000905417
-:1066000000009056000090580000905A0000905CE6
-:106610000000905E000090600000906200009064B6
-:1066200000009066000090680000906A0000906C86
-:106630000000906E00009070000090720000907456
-:1066400000009076000090780000907A0000907C26
-:106650000000907E000090800000908200009084F6
-:1066600000009086000090880000908A0000908CC6
-:106670000000908E00009090000090920000909496
-:1066800000009096000090980000909A0000909C66
-:106690000000909E000090A0000090A2000090A436
-:1066A000000090A6000090A8000090AA000090AC06
-:1066B000000090AE000090B0000090B2000090B4D6
-:1066C000000090B6000090B8000090BA000090BCA6
-:1066D000000090BE000090C0000090C2000090C476
-:1066E000000090C6000090C8000090CA000090CC46
-:1066F000000090CE000090D0000090D2000090D416
-:10670000000090D6000090D8000090DA000090DCE5
-:10671000000090DE000090E0000090E2000090E4B5
-:10672000000090E6000090E8000090EA000090EC85
-:10673000000090EE000090F0000090F2000090F455
-:10674000000090F6000090F8000090FA000090FC25
-:10675000000090FE000091000000910200009104F2
-:1067600000009106000091080000910A0000910CC1
-:106770000000910E00009110000091120000911491
-:1067800000009116000091180000911A0000911C61
-:106790000000911E00009120000091220000912431
-:1067A00000009126000091280000912A0000912C01
-:1067B0000000912E000091300000913200009134D1
-:1067C00000009136000091380000913A0000913CA1
-:1067D0000000913E00009140000091420000914471
-:1067E00000009146000091480000914A0000914C41
-:1067F0000000914E00009150000091520000915411
-:1068000000009156000091580000915A0000915CE0
-:106810000000915E000091600000916200009164B0
-:1068200000009166000091680000916A0000916C80
-:106830000000916E00009170000091720000917450
-:1068400000009176000091780000917A0000917C20
-:106850000000917E000091800000918200009184F0
-:1068600000009186000091880000918A0000918CC0
-:106870000000918E00009190000091920000919490
-:1068800000009196000091980000919A0000919C60
-:106890000000919E000091A0000091A2000091A430
-:1068A000000091A6000091A8000091AA000091AC00
-:1068B000000091AE000091B0000091B2000091B4D0
-:1068C000000091B6000091B8000091BA000091BCA0
-:1068D000000091BE000091C0000091C2000091C470
-:1068E000000091C6000091C8000091CA000091CC40
-:1068F000000091CE000091D0000091D2000091D410
-:10690000000091D6000091D8000091DA000091DCDF
-:10691000000091DE000091E0000091E2000091E4AF
-:10692000000091E6000091E8000091EA000091EC7F
-:10693000000091EE000091F0000091F2000091F44F
-:10694000000091F6000091F8000091FA000091FC1F
-:10695000000091FEFFFFFFFFFFFFFFFFFFFFFFFFB4
-:10696000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF37
-:10697000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF27
-:10698000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF17
-:10699000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
-:1069A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7
-:1069B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
-:1069C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7
-:1069D000FFFFFFFF0000000300BEBC20000000001E
-:1069E000000000050000000300BEBC200000000005
-:1069F000000000050000000300BEBC2000000000F5
-:106A0000000000050000000300BEBC2000000000E4
-:106A1000000000050000000300BEBC2000000000D4
-:106A2000000000050000000300BEBC2000000000C4
-:106A3000000000050000000300BEBC2000000000B4
-:106A4000000000050000000300BEBC2000000000A4
-:106A50000000000500002000000040C00000618030
-:106A6000000082400000A3000000C3C00000E480DA
-:106A70000001054000012600000146C000016780BA
-:106A8000000188400001A9000001C9C00001EA809E
-:106A900000020B4000022C0000024CC000026D807E
-:106AA00000028E400002AF000002CFC00002F08062
-:106AB00000001140000080000001038000018700F9
-:106AC00000020A8000028E0000031180000395007E
-:106AD0000004188000049C0000051F800005A3002E
-:106AE000000626800006AA0000072D800007B100DE
-:106AF000000834800008B80000093B800009BF008E
-:106B0000000A4280000AC600000B4980000BCD003D
-:106B1000000C5080000CD400000D578000005B007A
-:106B200000007FF800007FF80000022A0000350016
-:106B30000000FF00000000000000FF000000000057
-:106B40000000FF00000000000000FF000000000047
-:106B50000000FF00000000000000FF000000000037
-:106B60000000FF00000000000000FF000000000027
-:106B70000000FF00000000000000FF000000000017
-:106B80000000FF00000000000000FF000000000007
-:106B90000000FF00000000000000FF0000000000F7
-:106BA0000000FF00000000000000FF0000000000E7
-:106BB0000000FF00000000000000FF0000000000D7
-:106BC0000000FF00000000000000FF0000000000C7
-:106BD0000000FF00000000000000FF0000000000B7
-:106BE0000000FF00000000000000FF0000000000A7
-:106BF0000000FF00000000000000FF000000000097
-:106C00000000FF00000000000000FF000000000086
-:106C10000000FF00000000000000FF000000000076
-:106C20000000FF00000000000000FF000000000066
-:106C30000000FF00000000000000FF000000000056
-:106C40000000FF00000000000000FF000000000046
-:106C50000000FF00000000000000FF000000000036
-:106C60000000FF00000000000000FF000000000026
-:106C70000000FF00000000000000FF000000000016
-:106C80000000FF00000000000000FF000000000006
-:106C90000000FF00000000000000FF0000000000F6
-:106CA0000000FF00000000000000FF0000000000E6
-:106CB0000000FF00000000000000FF0000000000D6
-:106CC0000000FF00000000000000FF0000000000C6
-:106CD0000000FF00000000000000FF0000000000B6
-:106CE0000000FF00000000000000FF0000000000A6
-:106CF0000000FF00000000000000FF000000000096
-:106D00000000FF00000000000000FF000000000085
-:106D10000000FF00000000000000FF000000000075
-:106D20000000FF00000000000000FF000000000065
-:106D30000000FF00000000000000FF000000000055
-:106D40000000FF00000000000000FF000000000045
-:106D50000000FF00000000000000FF000000000035
-:106D60000000FF00000000000000FF00000019000C
-:106D70000000000000000000FFFFFFFF0000000017
-:106D800003938700000000000393870000007FF852
-:106D900000007FF800000BA700003500000000FF96
-:106DA000000000FF000000FF000000FF000000FFE7
-:106DB000000000FF000000FF000000FF0000FF00D7
-:106DC000000000000000FF00000000000000FF00C5
-:106DD000000000000000FF00000000000000FF00B5
-:106DE000000000000000FF00000000000000FF00A5
-:106DF000000000000000FF00000000000000FF0095
-:106E0000000000000000FF00000000000000FF0084
-:106E1000000000000000FF00000000000000FF0074
-:106E2000000000000000FF00000000000000FF0064
-:106E3000000000000000FF00000000000000FF0054
-:106E4000000000000000FF00000000000000FF0044
-:106E5000000000000000FF00000000000000FF0034
-:106E6000000000000000FF00000000000000FF0024
-:106E7000000000000000FF00000000000000FF0014
-:106E8000000000000000FF00000000000000FF0004
-:106E9000000000000000FF00000000000000FF00F4
-:106EA000000000000000FF00000000000000FF00E4
-:106EB000000000000000FF00000000000000FF00D4
-:106EC000000000000000FF00000000000000FF00C4
-:106ED000000000000000FF00000000000000FF00B4
-:106EE000000000000000FF00000000000000FF00A4
-:106EF000000000000000FF00000000000000FF0094
-:106F0000000000000000FF00000000000000FF0083
-:106F1000000000000000FF00000000000000FF0073
-:106F2000000000000000FF00000000000000FF0063
-:106F3000000000000000FF00000000000000FF0053
-:106F4000000000000000FF00000000000000FF0043
-:106F5000000000000000FF00000000000000FF0033
-:106F6000000000000000FF00000000000000FF0023
-:106F7000000000000000FF00000000000000FF0013
-:106F8000000000000000FF00000000000000FF0003
-:106F9000000000000000FF00000000000000FF00F3
-:106FA000000000000000FF00000000000000FF00E3
-:106FB000000000000000FF00000000000000FF00D3
-:106FC000000000000000FF00000000000000FF00C3
-:106FD000000000000000FF00000000000000FF00B3
-:106FE000000000000000FF00000000000000FF00A3
-:106FF000000000000000FF0000000000FFFFFFFF96
-:10700000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF90
-:10701000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF80
-:10702000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF70
-:10703000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF60
-:10704000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50
-:10705000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
-:10706000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30
-:10707000FFFFFFFFFFFFFFFFFFFFFFFF000000001C
-:10708000000028AD000029180000291900000005A3
-:10709000000000070000FF000FFFFFFF0000FF00DF
-:1070A0000FFFFFFF000000FF0000FF000000FF00D7
-:1070B0000FFFFFFF0000FF000FFFFFFF000000FFBA
-:1070C0000000FF000000FF000FFFFFFF0000FF00B7
-:1070D0000FFFFFFF000000FF0000FF000000FF00A7
-:1070E0000FFFFFFF0000FF000FFFFFFF000000FF8A
-:1070F0000000FF000000FF000FFFFFFF0000FF0087
-:107100000FFFFFFF000000FF0000FF000000FF0076
-:107110000FFFFFFF0000FF000FFFFFFF000000FF59
-:107120000000FF000000FF000FFFFFFF0000FF0056
-:107130000FFFFFFF000000FF0000FF000000FF0046
-:107140000FFFFFFF0000FF000FFFFFFF000000FF29
-:107150000000FF000000FF000FFFFFFF0000FF0026
-:107160000FFFFFFF000000FF0000FF000000FF0016
-:107170000FFFFFFF0000FF000FFFFFFF000000FFF9
-:107180000000FF000000FF000FFFFFFF0000FF00F6
-:107190000FFFFFFF000000FF0000FF000000FF00E6
-:1071A0000FFFFFFF0000FF000FFFFFFF000000FFC9
-:1071B0000000FF000000FF000FFFFFFF0000FF00C6
-:1071C0000FFFFFFF000000FF0000FF000000FF00B6
-:1071D0000FFFFFFF0000FF000FFFFFFF000000FF99
-:1071E0000000FF000000FF000FFFFFFF0000FF0096
-:1071F0000FFFFFFF000000FF0000FF000000FF0086
-:107200000FFFFFFF0000FF000FFFFFFF000000FF68
-:107210000000FF000000FF000FFFFFFF0000FF0065
-:107220000FFFFFFF000000FF0000FF000000FF0055
-:107230000FFFFFFF0000FF000FFFFFFF000000FF38
-:107240000000FF000000FF000FFFFFFF0000FF0035
-:107250000FFFFFFF000000FF0000FF000000FF0025
-:107260000FFFFFFF0000FF000FFFFFFF000000FF08
-:107270000000FF000000FF000FFFFFFF0000FF0005
-:107280000FFFFFFF000000FF0000FF000000FF00F5
-:107290000FFFFFFF0000FF000FFFFFFF000000FFD8
-:1072A0000000FF000000FF000FFFFFFF0000FF00D5
-:1072B0000FFFFFFF000000FF0000FF000000FF00C5
-:1072C0000FFFFFFF0000FF000FFFFFFF000000FFA8
-:1072D0000000FF000000FF000FFFFFFF0000FF00A5
-:1072E0000FFFFFFF000000FF0000FF000000FF0095
-:1072F0000FFFFFFF0000FF000FFFFFFF000000FF78
-:107300000000FF000000FF000FFFFFFF0000FF0074
-:107310000FFFFFFF000000FF0000FF000000FF0064
-:107320000FFFFFFF0000FF000FFFFFFF000000FF47
-:107330000000FF000000FF000FFFFFFF0000FF0044
-:107340000FFFFFFF000000FF0000FF000000FF0034
-:107350000FFFFFFF0000FF000FFFFFFF000000FF17
-:107360000000FF000000FF000FFFFFFF0000FF0014
-:107370000FFFFFFF000000FF0000FF000000FF0004
-:107380000FFFFFFF0000FF000FFFFFFF000000FFE7
-:107390000000FF000000FF000FFFFFFF0000FF00E4
-:1073A0000FFFFFFF000000FF0000FF000000FF00D4
-:1073B0000FFFFFFF0000FF000FFFFFFF000000FFB7
-:1073C0000000FF000000FF000FFFFFFF0000FF00B4
-:1073D0000FFFFFFF000000FF0000FF000000FF00A4
-:1073E0000FFFFFFF0000FF000FFFFFFF000000FF87
-:1073F0000000FF000000FF000FFFFFFF0000FF0084
-:107400000FFFFFFF000000FF0000FF000000FF0073
-:107410000FFFFFFF0000FF000FFFFFFF000000FF56
-:107420000000FF000000FF000FFFFFFF0000FF0053
-:107430000FFFFFFF000000FF0000FF000000FF0043
-:107440000FFFFFFF0000FF000FFFFFFF000000FF26
-:107450000000FF000000FF000FFFFFFF0000FF0023
-:107460000FFFFFFF000000FF0000FF000000FF0013
-:107470000FFFFFFF0000FF000FFFFFFF000000FFF6
-:107480000000FF000000FF000FFFFFFF0000FF00F3
-:107490000FFFFFFF000000FF0000FF000000FF00E3
-:1074A0000FFFFFFF0000FF000FFFFFFF000000FFC6
-:1074B0000000FF000000FF000FFFFFFF0000FF00C3
-:1074C0000FFFFFFF000000FF0000FF000000FF00B3
-:1074D0000FFFFFFF0000FF000FFFFFFF000000FF96
-:1074E0000000FF000000FF000FFFFFFF0000FF0093
-:1074F0000FFFFFFF000000FF0000FF000000FF0083
-:107500000FFFFFFF0000FF000FFFFFFF000000FF65
-:107510000000FF000000FF000FFFFFFF0000FF0062
-:107520000FFFFFFF000000FF0000FF000000FF0052
-:107530000FFFFFFF0000FF000FFFFFFF000000FF35
-:107540000000FF000000FF000FFFFFFF0000FF0032
-:107550000FFFFFFF000000FF0000FF000000FF0022
-:107560000FFFFFFF0000FF000FFFFFFF000000FF05
-:107570000000FF000000FF000FFFFFFF0000FF0002
-:107580000FFFFFFF000000FF0000FF000000FF00F2
-:107590000FFFFFFF0000FF000FFFFFFF000000FFD5
-:1075A0000000FF000000FF000FFFFFFF0000FF00D2
-:1075B0000FFFFFFF000000FF0000FF000000FF00C2
-:1075C0000FFFFFFF0000FF000FFFFFFF000000FFA5
-:1075D0000000FF000000FF000FFFFFFF0000FF00A2
-:1075E0000FFFFFFF000000FF0000FF000000FF0092
-:1075F0000FFFFFFF0000FF000FFFFFFF000000FF75
-:107600000000FF000000FF000FFFFFFF0000FF0071
-:107610000FFFFFFF000000FF0000FF000000FF0061
-:107620000FFFFFFF0000FF000FFFFFFF000000FF44
-:107630000000FF000000FF000FFFFFFF0000FF0041
-:107640000FFFFFFF000000FF0000FF000000FF0031
-:107650000FFFFFFF0000FF000FFFFFFF000000FF14
-:107660000000FF000000FF000FFFFFFF0000FF0011
-:107670000FFFFFFF000000FF0000FF000000FF0001
-:107680000FFFFFFF0000FF000FFFFFFF000000FFE4
-:107690000000FF000000FF000FFFFFFF0000FF00E1
-:1076A0000FFFFFFF000000FF0000FF000000FF00D1
-:1076B0000FFFFFFF0000FF000FFFFFFF000000FFB4
-:1076C0000000FF000000FF000FFFFFFF0000FF00B1
-:1076D0000FFFFFFF000000FF0000FF000000FF00A1
-:1076E0000FFFFFFF0000FF000FFFFFFF000000FF84
-:1076F0000000FF000000FF000FFFFFFF0000FF0081
-:107700000FFFFFFF000000FF0000FF000000FF0070
-:107710000FFFFFFF0000FF000FFFFFFF000000FF53
-:107720000000FF000000FF000FFFFFFF0000FF0050
-:107730000FFFFFFF000000FF0000FF000000FF0040
-:107740000FFFFFFF0000FF000FFFFFFF000000FF23
-:107750000000FF000000FF000FFFFFFF0000FF0020
-:107760000FFFFFFF000000FF0000FF000000FF0010
-:107770000FFFFFFF0000FF000FFFFFFF000000FFF3
-:107780000000FF000000FF000FFFFFFF0000FF00F0
-:107790000FFFFFFF000000FF0000FF000000FF00E0
-:1077A0000FFFFFFF0000FF000FFFFFFF000000FFC3
-:1077B0000000FF000000FF000FFFFFFF0000FF00C0
-:1077C0000FFFFFFF000000FF0000FF000000FF00B0
-:1077D0000FFFFFFF0000FF000FFFFFFF000000FF93
-:1077E0000000FF000000FF000FFFFFFF0000FF0090
-:1077F0000FFFFFFF000000FF0000FF000000FF0080
-:107800000FFFFFFF0000FF000FFFFFFF000000FF62
-:107810000000FF000000FF000FFFFFFF0000FF005F
-:107820000FFFFFFF000000FF0000FF000000FF004F
-:107830000FFFFFFF0000FF000FFFFFFF000000FF32
-:107840000000FF000000FF000FFFFFFF0000FF002F
-:107850000FFFFFFF000000FF0000FF000000FF001F
-:107860000FFFFFFF0000FF000FFFFFFF000000FF02
-:107870000000FF000000FF000FFFFFFF0000FF00FF
-:107880000FFFFFFF000000FF0000FF000000FF00EF
-:107890000FFFFFFF0000FF000FFFFFFF000000FFD2
-:1078A0000000FF000000FF000FFFFFFF0000FF00CF
-:1078B0000FFFFFFF000000FF0000FF000000FF00BF
-:1078C0000FFFFFFF0000FF000FFFFFFF000000FFA2
-:1078D0000000FF000000FF000FFFFFFF0000FF009F
-:1078E0000FFFFFFF000000FF0000FF000000FF008F
-:1078F0000FFFFFFF0000FF000FFFFFFF000000FF72
-:107900000000FF000000FF000FFFFFFF0000FF006E
-:107910000FFFFFFF000000FF0000FF000000FF005E
-:107920000FFFFFFF0000FF000FFFFFFF000000FF41
-:107930000000FF000000FF000FFFFFFF0000FF003E
-:107940000FFFFFFF000000FF0000FF000000FF002E
-:107950000FFFFFFF0000FF000FFFFFFF000000FF11
-:107960000000FF000000FF000FFFFFFF0000FF000E
-:107970000FFFFFFF000000FF0000FF000000FF00FE
-:107980000FFFFFFF0000FF000FFFFFFF000000FFE1
-:107990000000FF000000FF000FFFFFFF0000FF00DE
-:1079A0000FFFFFFF000000FF0000FF000000FF00CE
-:1079B0000FFFFFFF0000FF000FFFFFFF000000FFB1
-:1079C0000000FF000000FF000FFFFFFF0000FF00AE
-:1079D0000FFFFFFF000000FF0000FF000000FF009E
-:1079E0000FFFFFFF0000FF000FFFFFFF000000FF81
-:1079F0000000FF000000FF000FFFFFFF0000FF007E
-:107A00000FFFFFFF000000FF0000FF000000FF006D
-:107A10000FFFFFFF0000FF000FFFFFFF000000FF50
-:107A20000000FF000000FF000FFFFFFF0000FF004D
-:107A30000FFFFFFF000000FF0000FF000000FF003D
-:107A40000FFFFFFF0000FF000FFFFFFF000000FF20
-:107A50000000FF000000FF000FFFFFFF0000FF001D
-:107A60000FFFFFFF000000FF0000FF000000FF000D
-:107A70000FFFFFFF0000FF000FFFFFFF000000FFF0
-:107A80000000FF000000FF000FFFFFFF0000FF00ED
-:107A90000FFFFFFF000000FF0000FF000000FF00DD
-:107AA0000FFFFFFF0000FF000FFFFFFF000000FFC0
-:107AB0000000FF000000FF000FFFFFFF0000FF00BD
-:107AC0000FFFFFFF000000FF0000FF000000FF00AD
-:107AD0000FFFFFFF0000FF000FFFFFFF000000FF90
-:107AE0000000FF000000FF000FFFFFFF0000FF008D
-:107AF0000FFFFFFF000000FF0000FF000000FF007D
-:107B00000FFFFFFF0000FF000FFFFFFF000000FF5F
-:107B10000000FF000000FF000FFFFFFF0000FF005C
-:107B20000FFFFFFF000000FF0000FF000000FF004C
-:107B30000FFFFFFF0000FF000FFFFFFF000000FF2F
-:107B40000000FF000000FF000FFFFFFF0000FF002C
-:107B50000FFFFFFF000000FF0000FF000000FF001C
-:107B60000FFFFFFF0000FF000FFFFFFF000000FFFF
-:107B70000000FF000000FF000FFFFFFF0000FF00FC
-:107B80000FFFFFFF000000FF0000FF000000FF00EC
-:107B90000FFFFFFF0000FF000FFFFFFF000000FFCF
-:107BA0000000FF000000FF000FFFFFFF0000FF00CC
-:107BB0000FFFFFFF000000FF0000FF000000FF00BC
-:107BC0000FFFFFFF0000FF000FFFFFFF000000FF9F
-:107BD0000000FF000000FF000FFFFFFF0000FF009C
-:107BE0000FFFFFFF000000FF0000FF000000FF008C
-:107BF0000FFFFFFF0000FF000FFFFFFF000000FF6F
-:107C00000000FF000000FF000FFFFFFF0000FF006B
-:107C10000FFFFFFF000000FF0000FF000000FF005B
-:107C20000FFFFFFF0000FF000FFFFFFF000000FF3E
-:107C30000000FF000000FF000FFFFFFF0000FF003B
-:107C40000FFFFFFF000000FF0000FF000000FF002B
-:107C50000FFFFFFF0000FF000FFFFFFF000000FF0E
-:107C60000000FF000000FF000FFFFFFF0000FF000B
-:107C70000FFFFFFF000000FF0000FF000000FF00FB
-:107C80000FFFFFFF0000FF000FFFFFFF000000FFDE
-:107C90000000FF000000FF000FFFFFFF0000FF00DB
-:107CA0000FFFFFFF000000FF0000FF000000FF00CB
-:107CB0000FFFFFFF0000FF000FFFFFFF000000FFAE
-:107CC0000000FF000000FF000FFFFFFF0000FF00AB
-:107CD0000FFFFFFF000000FF0000FF000000FF009B
-:107CE0000FFFFFFF0000FF000FFFFFFF000000FF7E
-:107CF0000000FF000000FF000FFFFFFF0000FF007B
-:107D00000FFFFFFF000000FF0000FF000000FF006A
-:107D10000FFFFFFF0000FF000FFFFFFF000000FF4D
-:107D20000000FF000000FF000FFFFFFF0000FF004A
-:107D30000FFFFFFF000000FF0000FF000000FF003A
-:107D40000FFFFFFF0000FF000FFFFFFF000000FF1D
-:107D50000000FF0000001000000020800000310043
-:107D600000004180000052000000628000007300AB
-:107D700000008380000094000000A4800000B50093
-:107D80000000C5800000D6000000E6800000F7007B
-:107D9000000107800001180000012880000139005F
-:107DA0000001498000015A0000016A8000017B0047
-:107DB00000018B8000019C000001AC800001BD002F
-:107DC0000001CD800001DE000001EE800001FF0017
-:107DD00000000F8000007FF800007FF8000005F928
-:107DE0000000350010000000000028AD0000291838
-:107DF0000000291900000005000000060001000134
-:107E000000220006CCCCCCC97058103C0000FF000A
-:107E1000000000000000FF00000000000000FF0064
-:107E2000000000000000FF00000000000000FF0054
-:107E3000000000000000FF00000000000000FF0044
-:107E4000000000000000FF00000000000000FF0034
-:107E5000000000000000FF00000000000000FF0024
-:107E6000000000000000FF00000000000000FF0014
-:107E7000000000000000FF00000000000000FF0004
-:107E8000000000000000FF00000000000000FF00F4
-:107E9000000000000000FF00000000000000FF00E4
-:107EA000000000000000FF00000000000000FF00D4
-:107EB000000000000000FF00000000000000FF00C4
-:107EC000000000000000FF00000000000000FF00B4
-:107ED000000000000000FF00000000000000FF00A4
-:107EE000000000000000FF00000000000000FF0094
-:107EF000000000000000FF00000000000000FF0084
-:107F0000000000000000FF00000000000000FF0073
-:107F1000000000000000FF00000000000000FF0063
-:107F2000000000000000FF00000000000000FF0053
-:107F3000000000000000FF00000000000000FF0043
-:107F4000000000000000FF00000000000000FF0033
-:107F5000000000000000FF00000000000000FF0023
-:107F6000000000000000FF00000000000000FF0013
-:107F7000000000000000FF00000000000000FF0003
-:107F8000000000000000FF00000000000000FF00F3
-:107F9000000000000000FF00000000000000FF00E3
-:107FA000000000000000FF00000000000000FF00D3
-:107FB000000000000000FF00000000000000FF00C3
-:107FC000000000000000FF00000000000000FF00B3
-:107FD000000000000000FF00000000000000FF00A3
-:107FE000000000000000FF00000000000000FF0093
-:107FF000000000000000FF00000000000000FF0083
-:10800000000000000000FF00000000000000FF0072
-:10801000000000000000FF00000000000000FF0062
-:10802000000000000000FF00000000000000FF0052
-:10803000000000000000FF00000000000000FF0042
-:10804000000000000000FF00000000000000000130
-:10805000CCCC0201CCCCCCCCCCCC0201CCCCCCCC8A
-:10806000CCCC0201CCCCCCCCCCCC0201CCCCCCCC7A
-:10807000CCCC0201CCCCCCCCCCCC0201CCCCCCCC6A
-:10808000CCCC0201CCCCCCCCCCCC0201CCCCCCCC5A
-:1080900000000000FFFFFFFF03030303134202027F
-:1080A0005050502070608050020002000604060408
-:1080B000000E0000011600D6002625A0002625A0EF
-:1080C000002625A0002625A000720000012300F351
-:1080D000002625A0002625A0002625A0002625A0F4
-:1080E0000000FFFF000000000000FFFF0000000094
-:1080F0000000FFFF000000000000FFFF0000000084
-:108100000000FFFF000000000000FFFF0000000073
-:108110000000FFFF000000000000FFFF0000000063
-:108120000000FFFF000000000000FFFF0000000053
-:108130000000FFFF000000000000FFFF0000000043
-:108140000000FFFF000000000000FFFF0000000033
-:108150000000FFFF000000000000FFFF0000000023
-:108160000000FFFF000000000000FFFF0000000013
-:108170000000FFFF000000000000FFFF0000000003
-:108180000000FFFF000000000000FFFF00000000F3
-:108190000000FFFF000000000000FFFF00000000E3
-:1081A0000000FFFF000000000000FFFF00000000D3
-:1081B0000000FFFF000000000000FFFF00000000C3
-:1081C0000000FFFF000000000000FFFF00000000B3
-:1081D0000000FFFF000000000000FFFF00000000A3
-:1081E0000000FFFF000000000000FFFF0000000093
-:1081F0000000FFFF000000000000FFFF0000000083
-:108200000000FFFF000000000000FFFF0000000072
-:108210000000FFFF000000000000FFFF0000000062
-:108220000000FFFF000000000000FFFF0000000052
-:108230000000FFFF000000000000FFFF0000000042
-:108240000000FFFF000000000000FFFF0000000032
-:108250000000FFFF000000000000FFFF0000000022
-:108260000000FFFF000000000000FFFF0000000012
-:108270000000FFFF000000000000FFFF0000000002
-:108280000000FFFF000000000000FFFF00000000F2
-:108290000000FFFF000000000000FFFF00000000E2
-:1082A0000000FFFF000000000000FFFF00000000D2
-:1082B0000000FFFF000000000000FFFF00000000C2
-:1082C0000000FFFF000000000000FFFF00000000B2
-:1082D0000000FFFF000000000000FFFF00000000A2
-:1082E000FFFFFFF3318FFFFF0C30C30CC30C30C313
-:1082F000CF3CF300F3CF3CF30000CF3CCDCDCDCD50
-:10830000FFFFFFF130EFFFFF0C30C30CC30C30C395
-:10831000CF3CF300F3CF3CF30001CF3CCDCDCDCD2E
-:10832000FFFFFFF6305FFFFF0C30C30CC30C30C300
-:10833000CF3CF300F3CF3CF30002CF3CCDCDCDCD0D
-:10834000FFFFF4061CBFFFFF0C30C305C30C30C396
-:10835000CF300014F3CF3CF30004CF3CCDCDCDCDD6
-:10836000FFFFFFF2304FFFFF0C30C30CC30C30C3D4
-:10837000CF3CF300F3CF3CF30008CF3CCDCDCDCDC7
-:10838000FFFFFFFA302FFFFF0C30C30CC30C30C3CC
-:10839000CF3CF300F3CF3CF30010CF3CCDCDCDCD9F
-:1083A000FFFFFFF731EFFFFF0C30C30CC30C30C3EE
-:1083B000CF3CF300F3CF3CF30020CF3CCDCDCDCD6F
-:1083C000FFFFFFF5302FFFFF0C30C30CC30C30C391
-:1083D000CF3CF300F3CF3CF30040CF3CCDCDCDCD2F
-:1083E000FFFFFFF3318FFFFF0C30C30CC30C30C312
-:1083F000CF3CF300F3CF3CF30000CF3CCDCDCDCD4F
-:10840000FFFFFFF1310FFFFF0C30C30CC30C30C373
-:10841000CF3CF300F3CF3CF30001CF3CCDCDCDCD2D
-:10842000FFFFFFF6305FFFFF0C30C30CC30C30C3FF
-:10843000CF3CF300F3CF3CF30002CF3CCDCDCDCD0C
-:10844000FFFFF4061CBFFFFF0C30C305C30C30C395
-:10845000CF300014F3CF3CF30004CF3CCDCDCDCDD5
-:10846000FFFFFFF2304FFFFF0C30C30CC30C30C3D3
-:10847000CF3CF300F3CF3CF30008CF3CCDCDCDCDC6
-:10848000FFFFFFFA302FFFFF0C30C30CC30C30C3CB
-:10849000CF3CF300F3CF3CF30010CF3CCDCDCDCD9E
-:1084A000FFFFFFF730EFFFFF0C30C30CC30C30C3EE
-:1084B000CF3CF300F3CF3CF30020CF3CCDCDCDCD6E
-:1084C000FFFFFFF5304FFFFF0C30C30CC30C30C370
-:1084D000CF3CF300F3CF3CF30040CF3CCDCDCDCD2E
-:1084E000FFFFFFFF30CFFFFF0C30C30CC30C30C3C6
-:1084F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD82
-:10850000FFFFFFFF30CFFFFF0C30C30CC30C30C3A5
-:10851000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD60
-:10852000FFFFFFFF30CFFFFF0C30C30CC30C30C385
-:10853000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD3F
-:10854000FFFFFFFF30CFFFFF0C30C30CC30C30C365
-:10855000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD1D
-:10856000FFFFFFFF30CFFFFF0C30C30CC30C30C345
-:10857000CF3CF3CCF3CF3CF30008CF3CCDCDCDCDF9
-:10858000FFFFFFFF30CFFFFF0C30C30CC30C30C325
-:10859000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDD1
-:1085A000FFFFFFFF30CFFFFF0C30C30CC30C30C305
-:1085B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDA1
-:1085C000FFFFFFFF30CFFFFF0C30C30CC30C30C3E5
-:1085D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD61
-:1085E000FFFFFFF3320FFFFF0C30C30CC30C30C38F
-:1085F000CF3CF300F3CF3CF30000CF3CCDCDCDCD4D
-:10860000FFFFFFF1310FFFFF0C30C30CC30C30C371
-:10861000CF3CF300F3CF3CF30001CF3CCDCDCDCD2B
-:10862000FFFFFFF6305FFFFF0C30C30CC30C30C3FD
-:10863000CF3CF300F3CF3CF30002CF3CCDCDCDCD0A
-:10864000FFFFF4061CBFFFFF0C30C305C30C30C393
-:10865000CF300014F3CF3CF30004CF3CCDCDCDCDD3
-:10866000FFFFFFF2304FFFFF0C30C30CC30C30C3D1
-:10867000CF3CF300F3CF3CF30008CF3CCDCDCDCDC4
-:10868000FFFFFF8A042FFFFF0C30C30CC30C30C365
-:10869000CF3CC000F3CF3CF30010CF3CCDCDCDCDCF
-:1086A000FFFFFF9705CFFFFF0C30C30CC30C30C397
-:1086B000CF3CC000F3CF3CF30020CF3CCDCDCDCD9F
-:1086C000FFFFFFF5310FFFFF0C30C30CC30C30C3AD
-:1086D000CF3CF300F3CF3CF30040CF3CCDCDCDCD2C
-:1086E000FFFFFFF3320FFFFF0C30C30CC30C30C38E
-:1086F000CF3CF300F3CF3CF30000CF3CCDCDCDCD4C
-:10870000FFFFFFF1302FFFFF0C30C30CC30C30C351
-:10871000CF3CF300F3CF3CF30001CF3CCDCDCDCD2A
-:10872000FFFFFFF6305FFFFF0C30C30CC30C30C3FC
-:10873000CF3CF300F3CF3CF30002CF3CCDCDCDCD09
-:10874000FFFFFF061CBFFFFF0C30C30CC30C30C380
-:10875000CF3CC014F3CF3CF30004CF3CCDCDCDCD06
-:10876000FFFFFFF2304FFFFF0C30C30CC30C30C3D0
-:10877000CF3CF300F3CF3CF30008CF3CCDCDCDCDC3
-:10878000FFFFFFFA302FFFFF0C30C30CC30C30C3C8
-:10879000CF3CF300F3CF3CF30010CF3CCDCDCDCD9B
-:1087A000FFFFFFF731CFFFFF0C30C30CC30C30C30A
-:1087B000CF3CF300F3CF3CF30020CF3CCDCDCDCD6B
-:1087C000FFFFFFFF30CFFFFF0C30C30CC30C30C3E3
-:1087D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD5F
-:1087E000FFFFFFFF30CFFFFF0C30C30CC30C30C3C3
-:1087F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD7F
-:10880000FFFFFFFF30CFFFFF0C30C30CC30C30C3A2
-:10881000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD5D
-:10882000FFFFFFFF30CFFFFF0C30C30CC30C30C382
-:10883000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD3C
-:10884000FFFFFFFF30CFFFFF0C30C30CC30C30C362
-:10885000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD1A
-:10886000FFFFFFFF30CFFFFF0C30C30CC30C30C342
-:10887000CF3CF3CCF3CF3CF30008CF3CCDCDCDCDF6
-:10888000FFFFFFFF30CFFFFF0C30C30CC30C30C322
-:10889000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDCE
-:1088A000FFFFFFFF30CFFFFF0C30C30CC30C30C302
-:1088B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCD9E
-:1088C000FFFFFFFF30CFFFFF0C30C30CC30C30C3E2
-:1088D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD5E
-:1088E000FFFFFFFF30CFFFFF0C30C30CC30C30C3C2
-:1088F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD7E
-:10890000FFFFFFFF30CFFFFF0C30C30CC30C30C3A1
-:10891000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD5C
-:10892000FFFFFFFF30CFFFFF0C30C30CC30C30C381
-:10893000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD3B
-:10894000FFFFFFFF30CFFFFF0C30C30CC30C30C361
-:10895000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD19
-:10896000FFFFFFFF30CFFFFF0C30C30CC30C30C341
-:10897000CF3CF3CCF3CF3CF30008CF3CCDCDCDCDF5
-:10898000FFFFFFFF30CFFFFF0C30C30CC30C30C321
-:10899000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDCD
-:1089A000FFFFFFFF30CFFFFF0C30C30CC30C30C301
-:1089B000CF3CF3CCF3CF3CF30020CF3CCDCDCDCD9D
-:1089C000FFFFFFFF30CFFFFF0C30C30CC30C30C3E1
-:1089D000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD5D
-:1089E000FFFFFFFF30CFFFFF0C30C30CC30C30C3C1
-:1089F000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD7D
-:108A0000FFFFFFFF30CFFFFF0C30C30CC30C30C3A0
-:108A1000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD5B
-:108A2000FFFFFFFF30CFFFFF0C30C30CC30C30C380
-:108A3000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD3A
-:108A4000FFFFFFFF30CFFFFF0C30C30CC30C30C360
-:108A5000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD18
-:108A6000FFFFFFFF30CFFFFF0C30C30CC30C30C340
-:108A7000CF3CF3CCF3CF3CF30008CF3CCDCDCDCDF4
-:108A8000FFFFFFFF30CFFFFF0C30C30CC30C30C320
-:108A9000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDCC
-:108AA000FFFFFFFF30CFFFFF0C30C30CC30C30C300
-:108AB000CF3CF3CCF3CF3CF30020CF3CCDCDCDCD9C
-:108AC000FFFFFFFF30CFFFFF0C30C30CC30C30C3E0
-:108AD000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD5C
-:108AE000000C0000000700C000028130000B81581C
-:108AF0000002021000010230000F024000010330AA
-:108B0000000C0000000800C000028140000B8168DA
-:108B1000000202200001024000070250000202C0D1
-:108B2000001000000008010000028180000B81A8F5
-:108B30000002026000018280000E8298000803801B
-:108B4000001000000001010000028110000901383E
-:108B5000000201C8000101E8000E01F8000002D87F
-:108B6000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC45
-:108B700000002000CCCCCCCCCCCCCCCCCCCCCCCC45
-:108B8000CCCCCCCC00002000CCCCCCCCCCCCCCCC35
-:108B9000CCCCCCCCCCCCCCCC04002000CCCCCCCC21
-:108BA000CCCCCCCCCCCCCCCCCCCCCCCC41002000D4
-:108BB00003030303034202025050502070608050B0
-:108BC0001313131313421212505050207060805030
-:108BD000030102000000000000000000000000008F
-:108BE0001F8B080000000000000BFB51CFC0F003FA
-:108BF0008AF7093230288920F8C4E0427606864D8B
-:108C00001C0C0C5BB849D307C32C0C0C0CDA4CE4DD
-:108C1000E905E1DBBC0C0CCF8098810F555C80131B
-:108C200042FF075A20C80AB4830DBBFEE56A08B6A6
-:108C3000A70A0343011033283130E8AB22C445D4DE
-:108C400019182602F99150B1AB403A4C8D7C378F00
-:108C5000E2C1834F1AA3F2971A426807A8F8293491
-:108C6000F96550F9621D087DDA18BBB9253AC4D9F7
-:108C7000BFCB1A953FCD1ABFFA93F6A8FC7568EAE8
-:108C80001741F900B9FAD21DD80300000000000016
-:108C900000000000000000001F8B08000000000022
-:108CA000000BED7D7F7C14D5B5F8999DD9D9D9CD30
-:108CB000EE6608096C20E024861AFAA25D20609016
-:108CC000A843401ABF8FDA15A9A62DED77B5D4E2D7
-:108CD0000F60EBF3097DCF36931092101017B1D5CA
-:108CE00056AB2B0F2DF56B25B5D4D2FAA38B581E9E
-:108CF000B6EFF3BE4869EBD7621B7FE18F228D5A36
-:108D000084B658BFF79C7B273B33D94D36407FFC58
-:108D1000F1C207863B73EEBDE79E73EEB9E79C7B1D
-:108D2000EE8D0A35F0A133003EC09F0B016E0F019E
-:108D30004045EE695C7F7E4F7F03C05188A47BCBAA
-:108D400001D62860022B5B072399FB25C09F3A853B
-:108D50009557C91F8EF75603DC51F2957B117EB5EE
-:108D6000A540803D7BDB00B267B1EFA1E816280586
-:108D70002881D476FCCE7E12F7B3F68E05276720C5
-:108D80009AEBBF027C0033F173957EA884E0E00388
-:108D900099FD73303917C601C860FFAC863ED68E88
-:108DA0007240CE60BFB2BC50FF554DAE1DEF53D6E2
-:108DB00055C86AA23DFC475E529A0C17865F7DB08B
-:108DC0007AFBD37539F8B320527EE89FD87F1450D0
-:108DD000081F7903201D8E86212357176EE7589BA5
-:108DE000B1FD693FD2F133A589B30BC3D974EA69E8
-:108DF000D3E8D9D5A6433600C05036FBEAD9330CA8
-:108E0000E696FAA1F5E68144F4D20C8BF0E90CFB6E
-:108E10003225D588751280D1D78FF491F0FD22CDFF
-:108E2000CC53DF7E4239A38F3D5E46C720F0F680EB
-:108E30008DEF7ED65E10FBCF43AFCBB07F2627C130
-:108E4000DAA1FD5B0D27DF7F682AC0BE30D2DB448C
-:108E50001CC0A7A7202EF8FD51699876049F1583A2
-:108E6000B73312DD4BEA7CB97ED9DFA01172C94954
-:108E70002056E6961BAF5C229D2A905F86F4F29402
-:108E80005CBB2AF22D0FBDAE11F41A989B684D30D1
-:108E90007AAC6D03EB25473D390666260F9D568952
-:108EA0007A767F4A3983CBD33E40BB983F960BBE40
-:108EB00058FCBE7C92F8ADFF1BE1B749C83B409A15
-:108EC0009E03739384A7B7BD7CF38B4DE2C17248B8
-:108ED000C9583E94EF7288DFCF1E7E8DCF33FBFBE7
-:108EE000C3E0A77676A2C661FDAC11F80DCCE5FA19
-:108EF0006FED3435B345227DE4C2F321D45FAC9EDF
-:108F000024097A687D80F257725C01188BF8999079
-:108F10008800ACAB6DD686D33FA02B7FEAB7E5AE19
-:108F200066A8DC7D9875837885C2F9E9F4F0A01E07
-:108F30005D62BDC4DAD182ECFD99D86E79AC6A1657
-:108F4000E0E8E8C72FBE83E4933FC0797B82C1CDC0
-:108F5000127A56A6F6498F401590BE97053CF5C388
-:108F6000E0036C58E674F6C4F775A21F6968BBDEAF
-:108F70007AC7A08CD347E063EB75191EA77606F17C
-:108F80005112442FEF7B3F7BAF874FFDFDA996FD2C
-:108F90004681FED212C9D348F57F23E465887C164A
-:108FA000E0EB7E31CF14E833E1CC9C1CD9F275B2F2
-:108FB0007274CA72C2BAA7F5A2809C5890A279C3F3
-:108FC000C0ACDE69A397973C729275C22F94C6F02D
-:108FD0007128719217868F4272AB737C2AA69753C1
-:108FE0007B12CEF1B3B00551463AB0F15E65D7873A
-:108FF00038CDD710DA398EFA6C7084AF244B42EF3B
-:1090000073B89BC43C3FBFB98AE30FA27D0FBEACCF
-:109010003DCDD99E0C551E39E7786F94B87E63F02C
-:1090200059A2A7B77F45227C6548583E566F8BE80A
-:10903000DFABBFECE70ED1DE06095AFBC27C3E2D4A
-:1090400072AC87CD92D0131A9F675EFDE447B99A40
-:1090500071F27255AC5E5F28E55F77985514BB34AA
-:109060005278DD29F5D9EB413626F8362ABE9F29FC
-:1090700095B9F85E2CBE579D24BE1387E25B949C85
-:109080004D957CA35A276F3A49FC821EFC4E975C93
-:10909000CF1072562CFEF63C182DFEF250FA163503
-:1090A0008F668F12BF2D2749DF0A9F6D2709FC0AA3
-:1090B000CCDBF305BF2DE0F2A1303B1CFD9C62F13F
-:1090C0007B7464FC00CE637FAD172D53217B0D6054
-:1090D00002C0D3ED2F5A9692C3CF04AED747DBFF21
-:1090E0009E91F927FA7FC3326B73FD1F687FC3D54A
-:1090F000BFC2E40785ADD87E7F51ECB8E16DD7B82B
-:109100005F96DE76F57BB2747FB5E8FEFFE81AF76E
-:10911000BBD21FDDE30EB3719F597CBF7F38497905
-:10912000AC16F3A559D25DEB4021FB7D86E0EBDD6B
-:1091300036BC8D6F01F8A902AFCE22E1278AF63F37
-:1091400055247C9F68BF0FE12B46863F53C0A78AFA
-:1091500084977C7C1E165A3FE74A36FDC0E57FACFB
-:10916000D1781CC45CA340F082A17113AB39F5AD7A
-:109170007EC67BAB23A0AF29A7B809C545560324FB
-:10918000306E7217241B7D187FD9F9E57B11EE1D17
-:1091900045D37B75E013927D0F1E8C6CE9ADCEF547
-:1091A000B74A4EB64A284B6BA2FAFD145F49B54A3E
-:1091B000EC596185758CDB1CAB49B45F598EE3308B
-:1091C000748BB5F3FCB2CB7661F9364DD265266A65
-:1091D0005FBD60EAA6CB0D06F7FEAEE7CE40B869EC
-:1091E000E36A3A485FC6259487B171D594CF61CFC1
-:1091F000C58BB97E07E10FB738CACC0EF864EB27F0
-:109200005CDF3F9D74973FD1F289DC7AC2FE5E91AC
-:10921000707FCF8D07B8DF3187EBED6335A9DF7243
-:10922000BC3E546DF1F8028DB7D48AD2F836BCFF3B
-:10923000452A6F68AFD73BD8B83F75CD510BC717DC
-:109240009680C6178DBF97C532B0F1AA8D00B75E64
-:10925000F04CCF2C28EC7F459B16BBF084B87B9C50
-:10926000ADD7E7C75BD5DF9DF00AB3978EED0A9ABD
-:10927000884F74AF9C0956235F07B293B07FAB341D
-:10928000C9F93300B5C8575307E463B399CCC8ECA8
-:109290007D3AA6C5032866D0AF21DD372168257B3E
-:1092A000DFF88E96ACC7F6DFA3F675F1FDD6C69A49
-:1092B000F1181F79BC6DF54485CDF71FB55913150D
-:1092C00066B4EF6CEBA1E7A36D697ABFA3ED4E7AAC
-:1092D000DAE3434D62D8E393B11FB303E5ED989F02
-:1092E00099460CAF8DE7FBC8BFDD20F44897782A7C
-:1092F0004A562EC5EF7198D60B88D7FE79584E374F
-:10930000C0346459BAE929B9948DE3864A988E6DC0
-:10931000EF7AE157FC7B154C0F30F97ACA6CA679CD
-:10932000706BA32F13A8A6E7C5D8DFADA60F98C909
-:10933000039138C3CB41D740CC5DD621B926D2406A
-:10934000FDC77B0DAC7FC36E2CDF3093194A40ED17
-:10935000CB11A223C4B1BF99074CD2E381261FC50C
-:10936000E9D24DBE20D271A47ED248D761E25573B6
-:109370005E77C3CFEE779799C6FBCDA07C70FA3E9F
-:10938000EC637A62F70BE37D5639E141E3674F1EE8
-:10939000478CF9326894DE26E86CD3FD5884EB9D47
-:1093A0008DCC3FC47860217C369E776D6CB8788216
-:1093B000DAD8958073F0994E60BC556DCC88671FE4
-:1093C000BDF7C23F8F46D1CC5CB92B367DCC95F52D
-:1093D000397CBCF0136495E4FF5805FFDE157B4A29
-:1093E000BF32EC6C4FF27ED73E5FEFFCEEA7FE8EF5
-:1093F00055DADFF76B57D6E7A93F897DCFC397A52D
-:1094000032D7C34FBF1068FE1ACAA7A0EFEE175E8F
-:10941000DB7B26D2FB800C280FE97DCD240F287F33
-:10942000A8479E62F2D0CFDA1BDBB2E137CEF91C3F
-:1094300089BBCBE946864003E71B76F55F821F3F79
-:1094400015F1DABD225EBBA72D46CFA7DB0C7A3E15
-:10945000D55647DFB36D712A3FD9D648E5C7DB4CF7
-:109460002AFFA8AD85CA3BDB12547EB4AD959E3B66
-:10947000DA92F4BCAD6D193DD34D7C9E6F684B51B3
-:10948000B9AB6D35D5B3C7FF31A6359CF2F7CF75B3
-:10949000EEF2C5C659B9F9CEFE7E34E62E5FA47F42
-:1094A000D4559EA7B9CB73E10BAEF62E3C7EB5AB7F
-:1094B0007CFE40970B7ECEEBEEF2ECFE075CF0E715
-:1094C0003EE72ECFDCB7C7551EDBE22E47E2875CB6
-:1094D000ED0562EEF256543E5C7F917C74C56AC61F
-:1094E000E495BFC1EFD3839F737D978B949FAB7A35
-:1094F000AA517E5A7C71CB40F9E1F294467D260D4B
-:1095000095139B6F23C9978DC7DF5AAEFE479E8682
-:1095100097A7A2E5A141895B30541EBC7CF7CAC75E
-:10952000103D23E4E57FE4E01F430E607E19EBA4C9
-:10953000F0BA9AC7EE23BB35B015C8EEF3A30D5DA4
-:10954000E95887276793F9F6C1AEF5CD7D4466EDFE
-:1095500004CAA10BF749034A01FF56AC73018D7F82
-:109560000FD6A67D284F1130A6CBD30096FFE096EC
-:109570000957B1F6F709B8AEFBC1923E02306E82D0
-:109580009A44FF2652EBF673F6CA3CEE613FB77D74
-:109590003FD29AA1987F830BEFA1E3E6FB38F2C498
-:1095A00059ADBF66F340DE326BDB5AF60CD5264D63
-:1095B000D9C0FAE544B7A52183E0CCC68CE563AFFA
-:1095C0008255CC6E639FE5B0096887CDF699CFCA06
-:1095D00033C93EDA8F4FDBEED9269E8F8B7978998F
-:1095E000CFFC25D287C1FD6A3838BBDF11F90549A8
-:1095F0004BE271ABF8FD0C457F79DC653FD9E35355
-:10960000948499C8C3AF23B2D8E7D1E3AD3C3EA25E
-:1096100002EA8742F0AFCBEEFD31FB59CAFC0219DA
-:10962000F188F17D2838719971E9D943F150954459
-:1096300012FBC17DEC2DAC9FCE31971B49473F9269
-:1096400022F08999848FAA737C54256E26F2C8D1A2
-:109650009F043E763BF67E9A141B80FE700EBFB5CB
-:10966000C144EB95E8B78E51894E9D11B7FD354B3E
-:10967000E17276967876FAF3DB87001DDC4F1ED711
-:10968000A861FB6B1A9B35B4AF0D886BE87F7786BA
-:1096900017950E676F6F68E3FBE3BDA80F03B84F24
-:1096A000AE8B7DF2183D3BC38FB4E0BC3B5ACFE894
-:1096B000505DB89D48DCBDDF5B5217F2ECEF6608E9
-:1096C000CFA051E6D9079EE0AAE71FA7F8ECFD6EF0
-:1096D0009046C6BF4BE06FC3752B294DCF4BA78C6F
-:1096E000CBEE0EC4DCF8FEF5E8C7EB97F8FBF47C94
-:1096F000789D2EBA15DA9FB59FEA583595E1719697
-:1097000098731E2C11F2A58ED55218C702ADD0F752
-:1097100010AF1F4E50DC4B0B270CA8C9EDD36A3895
-:109720001F1C74BA51D47B41B1F74B5331F4AB25B4
-:1097300023D58AF2A455B179240DAD673F3F27EABE
-:1097400077BFFF2FCFD13CA9D0689E48069B4779B1
-:10975000FA511473A5827151D94C29B86FF3173996
-:10976000996FBEAC10F3595B9830B41ADADAE3792A
-:10977000201E3C36287C1EBF21E0C14A513CAB581C
-:10978000FCFFBD48FCED7E18FEDD02FF1E7C16C20C
-:10979000BF4BE05306463BC5380DAE67012E359CE6
-:1097A000F918AF89FECB849E02F822F1CDFEFE921D
-:1097B000E04BB1E3F96A91E3792DC78FFB900F6C11
-:1097C0003C5B86E34746E0F19AC2D7192D9130629F
-:1097D00035B4D4E795AB1F0B7ABD6BCB95F5C5516E
-:1097E000C9D5C3A2FE48E3F8718E2F3F12E3786C0F
-:1097F00038BEFC50F0252DC3EC5730FE78A65877C4
-:1098000060918B2FC745BBE980CD971B5C7C3932BB
-:109810004ABEEC2D723CC773E33920E4EC17C3F168
-:10982000C501FFBC18FFAFC5F829AE7EBCF39A0E88
-:109830002B4CEBF26F9599B9FE185CBF6897E06E00
-:1098400054CEEDB0EA09EE157C2FB5F07590C1BD90
-:10985000EA84034874A0FDB616F74ACF03F896725F
-:1098600073B368FF77546FE160FB879DF53628F38B
-:109870006C3C06F07DFBBCBFD8706F3BE18E775E21
-:109880006FC31DA5F6128378BCE71CD78F3B9710DA
-:10989000DC907CA45871F6AABF3C49797D651049DB
-:1098A00063DCB14B49519C193721303EB92A10A7CE
-:1098B000149691E2D4158B793D5DD128CE1A80148F
-:1098C000DC89F1B97285F64D3EAE24753FDA11524E
-:1098D000D2A24D57D097B463FB630DCA0BB3F1D935
-:1098E00054F2D91E6A87E183EDDE5112DD8572756F
-:1098F000DB24D540B9DA35E9268AA76F6AE779858E
-:109900009B2E56298EB8F98508ADBF6B95F82711A7
-:10991000DE325503E3C5AB427F796E292BF7B7974B
-:10992000EAD205340EC2DBF241624D83234F91E14E
-:109930001D88539E1DC5E136B5F0FD1EF65389F511
-:1099400057CD3328CE68A01E63DFBB1B55B25F37EF
-:1099500055D5CCC5FE36376A646F6C5E58D34E71F0
-:10996000BCC610C531CBC28684F1F7E8B92A33C032
-:1099700059B9DC68477B33322B0418772AABE2FDF8
-:1099800045CE028A43F9219DA865CF688F0AD9B1D7
-:10999000D8DEA2ECE7D09E690CE832C6FD2D737FBD
-:1099A000FD384A85E33FF27F01E2E39F2803D2DDE1
-:1099B000E66F343D587FD8FCC668A648B86C717015
-:1099C000911E05B2338A804B17099729122ECBE1DD
-:1099D0000270E9B0797E10E7F9851AFBC3F31B1D0D
-:1099E000F986D5DC7E77DA2D7ECFF7D1E68B2EF7A0
-:1099F00047CA695E9E0BE7F27CD1E1EBDB79A223DB
-:109A00008D17C097C3531E197EADB0FB0A7DF78F2B
-:109A1000BB2986FAACBBE2DFC4F366FEAC14EF2BC5
-:109A200057C7CC303EC5F7CA9B5BCD3CFD7DC3CF4D
-:109A3000F5701D2486E54399C0FF10C31DF37EEA2F
-:109A400014061F290CAF96FB86CDBFD414AB99E644
-:109A5000ED421FCDDB002A039C37557C1EFB219570
-:109A6000A8253D63462B1DF3C7DFB487E6CF7F579C
-:109A7000CA2035127FE24847AF9C78E522008E72FB
-:109A8000F5A9CBC9237E91577C9AE5C4DF2317350E
-:109A90007FFCE922E13245C2658B83537BA4A2F4AB
-:109AA0008A9A2E122E53245C96C3AD9DADF2F5DC3E
-:109AB0003AD6817900FEF3345779ED7921F7F739F9
-:109AC0006157B96BA6BBBE3ACB5DBF6B96BBBE7A86
-:109AD0002EAF1F567DF3709FBFD879F2EA49CE931F
-:109AE0003A6D78F848E308F34AD38358BF4C3120E5
-:109AF0005B4EEB5546AC5B79F7C96B543EFFA7F85C
-:109B0000F9BEFD26450FA21FF98F3E4E45E5F8DA56
-:109B1000E31D095F5BFFBE260B7BAB403E38C4F8FC
-:109B2000B9083F84E268E718F3B5E6DF303AFA9FF8
-:109B3000E1F9F0DE765F54930DAAC32F66F619247F
-:109B40001D71988B2B149E87C3F880F6900A891696
-:109B50008C3BAFA9F2913DA284475837AA1C7A2BBF
-:109B60004FBE5E2E2E05269EB3A04F06C0DCD779D1
-:109B7000BFA13810DE11E82767BA1453E8CE0418E5
-:109B80000386C493C1789E0040938EFAAC3C78BAA9
-:109B9000DB5D42ED4AE626F8A06414ED2AFD944709
-:109BA00073DADB1D01DF20DC4DED322FA9FC83B120
-:109BB000B976FDB114BDC4FC59D9914787E7252872
-:109BC0000FC517CF52DEC38428F9656BCB6F70E5E4
-:109BD000897F45AD71C58754BDEB8B12EEE3565DB1
-:109BE0006FF60F23E71D4C5D517CA46AA9D95F571E
-:109BF000186E307F1FF340F3CC832E359941FBDD87
-:109C00009A1CE6FEBC92A27863B75436BDB7210712
-:109C1000A754314DCBF00AC74D0BFDBDEEB1BE3898
-:109C2000DAA90A6CD8279DC3EAC90BE3CEF8A5F7D9
-:109C3000A954296F3AC77387EAB6A7D68C20EF23B9
-:109C4000DA3D6A3C992F2EFAA0CAFD637F28FFF700
-:109C50005742CDDF522B86D2ED47485FF46FC740A5
-:109C60000FC6DBED3C5AA56ACF734887B5150B626A
-:109C7000C38D9739508707F9C258BC2F64EE5067DF
-:109C80000E8BC74E75661EFE858B8B7F03F3D374D8
-:109C9000062A8BF339681F494CDE4383F218874E3E
-:109CA000D457CCFFE8657C0BD5C7612B2BC7E66981
-:109CB0000985D94BB7346C018C5BFB99FD44FE8957
-:109CC000DCC4EDA73A6E0F99EC0F8E23DA34BC5D3D
-:109CD0002D7BCA0754B73DB4A66D2738F3DFBCE728
-:109CE0002DECE7D650F3F3F9E9519C3FBC99C90B31
-:109CF00033EE60539B46CF5BDB747ADED216A3E76C
-:109D0000FA3683F2F33BDBEAA8FC55AC3A1BCF45AD
-:109D1000A57AAA19FD7A625B9F5BCA5E6D46DA522C
-:109D20009C20330FEDE45E2C53BE1F7303B13C89BE
-:109D30007F7FAF2B3D0FE30DBD411B7EED3CD35527
-:109D4000BE73CD5C8417718648F77DF3D0DFDF3CAE
-:109D5000C9CE4333B54F38D6BD9A003FAF42BE2B74
-:109D6000D5EF5883FD0715BBFC3D6A3F570613F13D
-:109D7000096ABCFCD1C00EC2875400EBEFE381EF4F
-:109D80005379F3141EEF87C58B46A0238FEFAF5195
-:109D90000D1EEF5A5C46FB472A939B1AF66AF3188E
-:109DA000817791ED8092E4EB9D38DF5778DE8CB0BF
-:109DB000AE093C469E0F26C5D1ED736BCA2FF2AF9C
-:109DC000D3A7BBDFCDFED1D1456B4A9AD87CB4A5D1
-:109DD0002F8BACFEB19A9C13C07DA4F9FB6859513E
-:109DE00063596E3714D9FFB8809D079924BFC9A65F
-:109DF000B7A273FB6385879FFE72BE6F1714E7538C
-:109E00008AC5FB73AAE847B4030F4DAF1CCECE2A18
-:109E10005FE843636C506F94CD0FB9CA7A539908C9
-:109E2000DAF072B46182AB1CAEAF7195FDFA875D5A
-:109E3000F54F965FADC25EB4E13FE61957B3779C2C
-:109E400045B6FB6269E25F0233314E05752946D79C
-:109E50003B3EF300D13F34385F17749A4D942F2E58
-:109E6000FC8A0B7959B7BF9FD76956B1B2617F9F02
-:109E7000C9BF9BF6F7E9BC6CD9DF3FC2E1D15F6691
-:109E8000E58EEEA99D167E870E8ADF42550A1639A9
-:109E9000F44B787C7317E2377E492666B1F7BDEF45
-:109EA000CB5C6E211D73C2DDA5713FE02753BE164A
-:109EB000C3B8E5BAA90FC480F49E94775FF0D900C7
-:109EC000CF1BAB0C256E4739667A6D00F3050F3D4D
-:109ED000201B7C5D525EC275D167F17C7D15E2FB73
-:109EE0004CB48FEA78DC3A24BE131FAB73F0837C4A
-:109EF000F5943FA2F1F5FDF79864C9C6F3ED52F36E
-:109F00003EEA1732520B9BF755160CE0F92410F677
-:109F1000DF445E15CA13198AF74D62F4C47DF6C991
-:109F20008B07DAFD8CD6C612DD8753A46669DC0781
-:109F3000A4076C7B72ACF4017B7E17F9857AF9CBB0
-:109F400029C0757CEDD4075A912E81EC97C06074BE
-:109F5000FBD749293018BDDF0E70BC024BD2407AC6
-:109F6000BB364D74F6D26BDD20DD332EBAFF4CD4F8
-:109F70008F2579BD413885C19D3D14AE37989EAB84
-:109F8000A21D3785D3D1DBCFD100DF1FF1E261B74E
-:109F9000EB85DF1410FBDB5A86F6397E32F5A61806
-:109FA000C6B7BBA730FED717E6FFA600CFBB324E21
-:109FB0007C99F46FEFA4DB685F735DED16B22B8FB5
-:109FC000327B02F3367BABF3D7EF6EE3793217C205
-:109FD000DD2D358C3FDD07648AD77AE1BE1370DB57
-:109FE000CD5A95DB2F64F2F74A60E6C8F22747B6F0
-:109FF000F279394AB953698AE2BC1BDF89FCF58BD7
-:10A000003273E63A851D40EB6CE5D23438F31E8F8F
-:10A01000097E3D2DF474B08ACB47AFDF929CFC8B58
-:10A02000B1F7731DF50AF1AD903CFC58CC877795DC
-:10A03000782B19014A4ACFE7572BB17FFEF97CC72D
-:10A0400079B04E25A3E9887FDD6D92D3BEFD869958
-:10A050008C6A0E7F3614BBE4E7F3D10F52E279FD30
-:10A06000F5FF659A65DA4CB4B360462D9E5B50AC43
-:10A0700000C2AD57B22DE45FD4FA286EBEAEEA86B8
-:10A08000BDD538EE7A5F1CC1D6543DD582F6C5BA2F
-:10A09000DA4774A4DB2BFAA22A6C27105367D48EFC
-:10A0A000A5FCEF048E3B5CCFDA75F0DBEE3723E4E2
-:10A0B000FC5EDDAC417C993E3853FB1BE883772185
-:10A0C0001EE3C616A3739E7570289D79BE4077D592
-:10A0D000103ACF71D23980749E81EDC6F3C6311823
-:10A0E0009D2F74D119189DCFCED1B9B78AD3B9BBE2
-:10A0F0006E4B4F8D93CE754FEDAD36B07F4EE7076B
-:10A10000357E7E37847476E0E9A57358B2D79FBA5E
-:10A110004EB43FBD72CFE87E29E263BFF769FBC84A
-:10A12000EE0C8F4F7C82F8C0FC6594833BA482EBDD
-:10A13000D227116EA475697D80EF57DEA57139674E
-:10A14000ED5F89FD42B968DF5E6FC57A7899B66BBD
-:10A150001EAE870CEE6AC2434F913F3C0867C1B008
-:10A16000EB28ABB79CDA0F7BDA376154EB316BE746
-:10A17000266A47F3F46FC029ADF3ACDD761A97E297
-:10A1800069F734DB13AC9F8D9AF0375D74F82BDBE5
-:10A1900031B1A4471E94B44BEFD9F250B9D40D5746
-:10A1A000785D4BF3756DA85D4372FB6CF7DEDDE8FF
-:10A1B0009FBDA29BFF07F935DA7960DB8195A1E4A9
-:10A1C000A3482F6607521EA9F58D92CC1A5657F94F
-:10A1D000201DE5FBF0EEF568BC6D0FD5F27520385B
-:10A1E000CA75E98026F204C7301D55CA9EFE446B2D
-:10A1F000BE78C33302CE6B37FF56CC2705121467E7
-:10A20000EB8C5DBEB39FF1CE6C49433E3DBF3494B1
-:10A210007C16E9A3EA29939657112729D46E79C2AF
-:10A22000DAB5B781F4EE803C465418C74D6B8CCB41
-:10A230004519DD0E6914528B639CAD62B13517F57B
-:10A2400058159317841FD7BA4F4AE6DB2717F41E19
-:10A250008B48E4F15FC67D6A5692F2E216368CE0D6
-:10A26000DFF0FC3C663FFC0EC775484D5F32C541D0
-:10A27000779B4F5F9312975E84FAF47CCEA7D251FE
-:10A28000F2E9CFC2AE8685E534F80B4F5C48E77F34
-:10A2900082115F02E3F1417F5A2F73C8D1381F2426
-:10A2A000FB46817F130CECFE00FDBFB08FFCDEDEB1
-:10A2B000F055DFC6FB792C5D8D4F3172FDF6B2F59E
-:10A2C000BECCB1FE78E35683FEB4802FDC2F879B93
-:10A2D000629D4BFBFEB9FB85DC79084CB0EA307F10
-:10A2E0006895CCE3E877947C85F211565B013D508C
-:10A2F0004EEB18D97FEB445E5BB7C86B5B2BF2DA91
-:10A30000FCD6AAED08BF192081F1C9F6F353B4EFCA
-:10A310001F5534BD834E0CA5CEC575225A6ECFCFC6
-:10A32000C7E7A37D3558B6EEEE6C66E38DC6ECF25A
-:10A33000ED347F3BDBB9BEF94CF057F351DF18E247
-:10A340003CD6E6C645A5304C5C325CEFCEA30BD5BF
-:10A35000865C65ADAACC5556CB270CBB7FB10FE30D
-:10A360004515389E7E88239E05F286A70665829352
-:10A37000E5690359CC3B98A3C6B71878CEDA9DCFD0
-:10A38000D913E4F6E08F30303413DD2C21178D7CA7
-:10A390007FB564764D1FEE07C1182E17982FE894ED
-:10A3A000874272F1F7A68FAFE4700CF32F6EE98845
-:10A3B00002E6BBDC32FB97F1AC817AB53F86791AB5
-:10A3C0006B9826E960DF37CEFEA5912FAEDCAF2576
-:10A3D0009705917EE104D95F9186243DFFDEE31A63
-:10A3E000899F7705F93A3755F053417E36E4F8B93D
-:10A3F000AE91F1B32137CFD72969AD187E7E0CFB22
-:10A400009F897AE8F7E4B7AD6FF4B5A01E32A08F4C
-:10A41000F27037D6FB7CD8FEDF8B2E365EE1D94C4E
-:10A420003F129FB2095C1736C6151FEA917F383973
-:10A43000FC4B3FBD2F420E7F984F0E97D9F250B282
-:10A44000AF355FFEDDD4A0E4E2D706E417A74B0BDF
-:10A45000A78BEFEF4297C1F5424BAE40B959165367
-:10A46000C9EF56CA7ABA68DF88AD7BB86F749D6C45
-:10A470001AB8EF04FFE1E7F735E1BAED585FDE0FF8
-:10A4800006793BF2860594FFC186867E192B7F688C
-:10A49000D87DD18C7FC0798F89373FE350D0BDEF15
-:10A4A000F44ED5A252E457A1F6DE6CDBABE3395B88
-:10A4B0003B4FC3FBFD3A1952F9CE2FFAD120263A71
-:10A4C000F4A944879BD95A3B0DE9F1A1F9783EB331
-:10A4D000BBAA631CD931E27CC375DB9ED115079EF4
-:10A4E000D7296CF99B3E743C367DAFC365B2CC5125
-:10A4F0003FB3D755DF5B6FB03D519FD96DC1107B26
-:10A500009A4A6A2FEE3BDBE738D46D73B3B46C160E
-:10A51000C09BF1F194F02EF63CC73B5BD774A1BF12
-:10A520008DF6D7794C4E5EFBAE1CEF605F97DD7DFC
-:10A53000D67C3CE77A08B8BCD8FC7963EB9A71F911
-:10A54000E4A2107F2E0EFD75E46B7AC8235F7D9721
-:10A550009566E1F4CB57A2907C09FA1CEEE3F480F7
-:10A560003BC7E6E553A1F10CF2C9AE27E4CC5BBFD3
-:10A57000503D26578B433351AEB2D139C5C895C033
-:10A58000D7E6DFA9E23B925C69AB6503CF75552B3B
-:10A5900009D29B3DE51D96B8F791F23EE5F4347E75
-:10A5A000BFCC607E3B64D19ED0CA4DB2A343E2FED5
-:10A5B0009E40AD5B6F2A31F7F989586B226BB78BE0
-:10A5C000F14B6DB54AFD0EEE2387211B8C6299EF8E
-:10A5D00097A2FA43BF22007751DC93D5CB1BF7B487
-:10A5E0009F8AC85BC39C5EBAB70D3E3D429E8BBB43
-:10A5F0009FD8E2E1F36CBCF010568C430EBA17AE54
-:10A60000A7C021879F739BB877D4A6BFB9ED4ACA6C
-:10A610002F0F822F4EFE41EC260BFDBE2E319F7B6D
-:10A62000F0399BCEF3EAE4AF197CBFC592AEA638F1
-:10A63000837DFECCEECF3E7766C38DC4FF55389F39
-:10A64000F2CCEF3D21EE8F1DFB4AEAF7E887587FF9
-:10A650000203EFC97CACED38ED575F907D43C6F83F
-:10A66000FE33A1710477C140BF3CCF312F2F10E7DB
-:10A670003900FAE47CE7BDFC56E0299487270F7384
-:10A680007FECC9C3EF901DFEE41F7C1994BB278F9C
-:10A690000F9FFFF098F08B6CB8C7FEC0EDB3C79466
-:10A6A000BE927CF65DAEFF0CF7070FBBE515943E3E
-:10A6B00019E5E5D897F7C9181F78AC4D935E66FA8F
-:10A6C000E77C31CE0B0EF7CBE8378D34AEEF79F85F
-:10A6D0006B8F737B13B747B737BD13C2F8FFF6C74D
-:10A6E000F9788F8A73B285F07DAA8DE7796C7F3C0B
-:10A6F0003F3D9ACFE7FE71B3DF28CF6BD77ACE5BB1
-:10A70000CDD364F739AFD38CDFEE266E77ED56E20A
-:10A71000E193C1C77E5FD2149770BD2B85CCDE0F4D
-:10A72000551339F73BE322A507BFDE7E35E6B75E5A
-:10A730001936A51896EF9226B3B23E41067F0CF368
-:10A7400037DEC9BEC0F05FDB5A42F91B9D0DE5ED57
-:10A75000786E73ECF2DA5DB88FDC8B1115CA5BB8DA
-:10A760006B2DE62174E27F5939B03E7D119D930037
-:10A77000AE0F98456B28E3C4FE469E790EB9FC0ED9
-:10A78000E98340AE5E217AA99E7C90002C1A5E4F30
-:10A790002DE57ACD627F3EA07352EEFCDC312DAA0E
-:10A7A0008B7EA59EF6CF2EE1F23862FEF829F65395
-:10A7B000065B3483D15FADF3E9198487F818CC0FB9
-:10A7C0002C59C80C203C1F10D377F98C91E9BE1688
-:10A7D000A085C7B7FBC039BF9A4BB87D3FE1DADB34
-:10A7E00025F4238EC699144CC3F2F178BE79714BCF
-:10A7F0009BFB3E915B1A1E21BDD809991E5C4FAC94
-:10A80000061FAD67BD75FB7567FD2B4B24911F6659
-:10A81000F31F0C6516DDEB484138A5CE6706A3276C
-:10A82000CF7FC543D791F81F59EAA6FB68F9B21C40
-:10A83000F93F7364FE9F6A3F36DF86CE8F76C1B7DD
-:10A840001B35A0FD9DE1F5FA50BE6DA175AEA42E9D
-:10A850007F5EEE0D2576DCD672E95D0D521077E451
-:10A860007FC9E367B5DE0785FB95CBDDE31B8C3342
-:10A870001A9689FB7FE35919CF7733998E6701CFF9
-:10A88000F198807610337FC85F933DFEDA6D428E7B
-:10A89000343840F5D92CB0745A37785E9A9D877257
-:10A8A000911C8E637CA2470FD3BD48A81F799E0ED2
-:10A8B000CFE72FE528313B600026B37AA14A192C57
-:10A8C0008CEB35097C25267798C77FF08D83E88F40
-:10A8D000841BDCF968CAC192177DE7A09DE6390F99
-:10A8E0007270F972F25F3C7C1E6D7EFFC325229F61
-:10A8F000AD04C2641789FA85F2F46CBBDEA6AF71B1
-:10A90000224279395D0725A247C5E4C47DE87FC1AD
-:10A910002F65E0F99760E23DC6AB7E3693BE0FDD52
-:10A92000374854235FDE3858A27754179317994855
-:10A93000B633F8EA8301F29FAA416FD6B0BF7E8991
-:10A94000F8288DD3282F6BD54FFDF70586C9CBB2DC
-:10A95000F71707CB4A9AF689D7D54ED79CFB979520
-:10A96000A1E4CF4B1CFB9741B19F3874DFFD769279
-:10A97000F3D1EE6F945F76379DEB2F1F0F62FFFDD3
-:10A98000D30BD04E595701AEBCBC7595BCFCEAFA4E
-:10A99000290B701F679DC8BBD337BC73513BE9DBE4
-:10A9A00004C5F95633C1437AC25EBFB84FD2187F8F
-:10A9B000E9307AC34B870DCA3ECA8BFF6678FFC564
-:10A9C00067219FE23E8ABB7DF346BEAF6AC3BDA24C
-:10A9D00037FFA184E6ABDE89FBD0139320F234DD90
-:10A9E000FB1F1370F560E39CC418E467F43863310F
-:10A9F00074A0F8542FE9ABC4F5786DF92363F8F926
-:10AA0000FEF9FA21B2CF65DA872E84AFD71E2F3434
-:10AA10005E7B5FDD5BFFF608BF4FD5BBFFE58DFBBF
-:10AA2000DC87F465703DB8EFF411F6F467F2C6AD5B
-:10AA30005E2DE1F1E84E6341E2F3382EC59CFD2A1C
-:10AA4000A347A63C4A7EA2FFB2FA2BF08A3E1BDE49
-:10AA5000CE5B5384DFE62F4FD1BAA668A656C7C691
-:10AA6000A11D90716681966E277D65DFFF80645D14
-:10AA70007C361F2F8E2B00DCFEC5F3091F38C60D58
-:10AA80003147BC0BF58AF0D34E03BFA787670EE5AD
-:10AA9000EFDC1E9E771E5BC6CF334D54F2F37BFC7A
-:10AAA00012DDC7F7B94E2F9F0BD52FB4BF79FB2D01
-:10AAB000EA02B453A6E8ABF64E62787759A549DCB2
-:10AAC0007739E64FD13D39BDFFEA832D80E31F7E04
-:10AAD0009DEBF4AC738A9EA0FBF4AA52FA749CE638
-:10AAE00085EA7D2DC5FD1CEFFBCF87F97AB329558B
-:10AAF000B609F319CCA753BBFCE857C6B8DF6CFB0B
-:10AB0000D94B43C9CF871DFA68CC7C2E3F5392574F
-:10AB1000D0FC3F5631FC3D0BEB3D789740FEFB5D92
-:10AB20006F8B707CA618AB78BB93868FBBDAF4383A
-:10AB3000DE238BDF8B00E487F8990027187DEF3543
-:10AB4000B87C2806FC14E56CB2E503C3C0EF03ED46
-:10AB5000A877BFE68365F9F0688BF0F935D964A66C
-:10AB6000A7A887F6693A62D0FC1CBF84D3695D351B
-:10AB7000C4C3ECD519D81EEB7FCF1495E492F9BE6F
-:10AB8000742F526035D0BA1DA8838C81FB0ABBBEDE
-:10AB900094457EA9F5100FB27ABBA774D17D2BDD49
-:10ABA0000698786F92FF6636B1F07BAD2F6362BE78
-:10ABB0008975157D5FABF37BFCD6D63603D9B131F1
-:10ABC0005ED60C7EDE65DD5485F0B0EF1F27BB93AB
-:10ABD000AD0FFEFA812C5E5967C0326AC73F9BF306
-:10ABE000B5EACE263A8FB66ECC0374DFBFB51CF83B
-:10ABF0007EA6BDEFAC30B962EF3B97E979E327EF72
-:10AC00008592DF72CA83A2EF2379289407D71DE6C5
-:10AC1000F4BC4DE8B763FE2CDD6FD8BBD647F7B662
-:10AC200078E13F2BE87F77E7A28FD3F5D4629DB11F
-:10AC3000BF1F2A315CF765541D57693C0BE49B41EB
-:10AC40006778DFC3EC24BAE7052F063D931AB8A452
-:10AC5000D2716EE59E781FD945AA6D17D5737BC654
-:10AC60003EDFC8E890FD26FBAE639E3FF303C7B707
-:10AC7000E6B78FBC7E5921FBA8A7C4FC19D2AB4B09
-:10AC8000E4ED7F7DE9227E6F6581BCFD3BC5F8EF79
-:10AC900094ACEA2ED48F93F83D335EB843C25E6421
-:10ACA000F620C9CD3A8BDFC7B58EB93E8FB272CFD1
-:10ACB0008DFC3EBF1ECBC7CF7FD602C54962375D34
-:10ACC000A5E59BAFB61DBD5EDCAF5568DE95A899C6
-:10ACD00064BE75E99F227C5F6D6CA3417E1B51723F
-:10ACE0001C2E279CEEF4C4785E1D5FB7CF007D2E2E
-:10ACF000E6316E5E58534DF77CB275036DE27BAA68
-:10AD000033D9F9289712F4DD8F95948CB59495CFAB
-:10AD1000888F337A1DE7BAF5AA07B278EEFDF627D9
-:10AD200003106864E5F99EDF67E3E40F2AC83AF789
-:10AD3000EF532934BE629FB7327ABDE488370324CB
-:10AD40005B703E85D87A8AF326D894C9D2EFD3B007
-:10AD50008280E3E8D15819F9D21902BC6F36541F2A
-:10AD60000F63DC36D43FB7859EF5895E949FE8EC8F
-:10AD7000AD7ABE73312D916A97DC87EBDCF99A418D
-:10AD800071EE2858A552BE5A30A9E6BDDFF85089A9
-:10AD9000C2ED68D625CEAB1E6B783D7BAA72F1BAA8
-:10ADA0005867F49C7F4C72C14325EC59B5E00DD92E
-:10ADB00071DF66C4EB5F78F9E8299F2A1F7B3D7C31
-:10ADC0000C36713E02E323BF07C4EAA17317860F56
-:10ADD0009CE72EC6476A5CFC508E2B748EF6CEB96B
-:10ADE000F9EFE31C1FE179DD3D25894B2294570BD8
-:10ADF00012E5F70ABD7091BC81EE3162D2C1EF8FCE
-:10AE000067FDDD9F473F8E8F70FF756BC8BC3C525E
-:10AE100051785C8F4985F0E0F50F093FBF783DCB55
-:10AE2000C737C57C2D4871CF2F0DBFEEDBEBF3315B
-:10AE300036B67D686F2B29D23B4ABF019D389F6390
-:10AE4000BE0CAEABDDB145A417EEB1988C4824978B
-:10AE50005086FEADD01350DF1FC4F88B5FCCAB7BA8
-:10AE600056FBE8BED8508542F7D7066E4EB2B510F5
-:10AE7000CF350E6431965F75E702C293AD53372329
-:10AE80009DA3B1BE76D447FEF20CED0BDFADE821F9
-:10AE90005CFF8FA191C8ECB3EF86B777519EBF9945
-:10AEA000C8E29597E81639EFEFCF58EEFED800DAF2
-:10AEB00051EF7436E9646F9F71733F38E72BEB777E
-:10AEC0003DF265625D66AE64E4D647AF3D51C88E23
-:10AED00060EBA8F0CBE675A15F46262C2B3F147ED5
-:10AEE000A40BFDB07B75F3AB11F283F2FB0F4C2E7C
-:10AEF000BE7E3272F1AC98A7B65C0CC647441CF516
-:10AF0000AA46103FC615BF66785FB3D70F38FE0B51
-:10AF10004FDCBBE79B8C1EB23817C734F99E27D88D
-:10AF2000F7A5A696C0F23507CF5631CEFACB093237
-:10AF30009E0146398BA29CBD053E8AFFBC05FBA342
-:10AF4000331CF83C21E60973805EEA77C4173F9F03
-:10AF5000E6655BDF7DE14E77F96A58340EE387578B
-:10AF6000DFEE878C84BF57CAED177F27C2F3C5BFBA
-:10AF700000A92EA4F35A71EFE9F21F9CADA27D74D3
-:10AF8000CD0CBD1AF72F6D3C7E22D6B337991C1B12
-:10AF90000EFBF5DA7046C57CA79777CCB87C0E60BF
-:10AFA0003B99AE09B85E8D81BCEBF4E77ADC788E14
-:10AFB000340E2FDEF679A1427828DBA4BC71AE9F57
-:10AFC0000B7BDAE6E3A9DEBFFE7684EB03FBF7D367
-:10AFD000D97962A7DAEE7BC2AEF6B6BB5CC30BA42E
-:10AFE00001562AE916A926B76F15F4A7CC8968DFA0
-:10AFF000ED9C9BC5DC73075C4F91702DBE61E046F4
-:10B000001ACFAAD03D518C07F5337F3FDF3D3A95EB
-:10B01000A164245A31F43E1D10BF0FE8D06FEC7BC1
-:10B02000EA0716601C2F00CC6FA7A7427240F11DE3
-:10B0300009EDD17416FD80A0A1B8E4A304F74398EC
-:10B040005DBB52D88F2575EEEFDE78CF19512E07F4
-:10B050004DD04FF67D540B6771BD854677FED21DEE
-:10B06000259F253B72C53E3F1D015801C6AD4D0DC4
-:10B07000340F29CE75E3BA33699FF7C60A83EEF918
-:10B0800055206E525D8FDCAD3C2E41C6E1FFAF54C2
-:10B0900006549C6F2BD9FAE17C7F434C365EC9F392
-:10B0A000FB99ECA79F69F5701DD2C1C7CFC5EAAC6B
-:10B0B000EC18E73B69A985EFAB19A58B87F1CB6F3E
-:10B0C00088A9D4CF55EBA694F2B88F5B6F1E11EB15
-:10B0D000D47F3EF41F2AAEBF6F3DF8E2254887EBD0
-:10B0E0001E934163FD1E792802595ABF322AAE5F72
-:10B0F000D7EE90F3DA5598A9447925DB797CF2DA1A
-:10B1000047029985ACFEB58FBE7C0E30FC8E740C68
-:10B11000EC9988F3E0411E3704ABFF9CCBD8FB6B66
-:10B1200015F8DFF9ECA62BA2DC0F38FCC312BA7FAE
-:10B1300054DAB6EBB3D46EDF15FE80637FED92A8D0
-:10B14000DF86E371CE6F4B992979F6DFECB8FAE12F
-:10B150006F4B1CBF9D7EBA8FF5DA6DF7A94986C784
-:10B16000CA6D6F933E99B7FD3B51A4C3CA9DEE7D56
-:10B17000B6EBB6BFDF857924D7C930B010E5593EAC
-:10B1800041E5A3A6362093DEE7E7A557104B18DC70
-:10B19000F75E5BF06BF6FDCD980C41A67ADFDCF72D
-:10B1A000AAFA189693E1147AB02B77BAF5DECA6D35
-:10B1B0002F535E83EE8381AA39B8BFEF966B2F3C85
-:10B1C0009B3F2ADA212BFBD6BD2D33BDB172C75B65
-:10B1D000CFA3FE58E9D19F6FE27F2A87C6A1DBA2E9
-:10B1E0009E7B66B61597FF70DD778EDE63B17E0FAE
-:10B1F0003FF2BB7B304FFEFABFBC7BCFBFA3BDF09D
-:10B20000645047FDBFF2C15F44C1218F5F8F727BE5
-:10B21000EBC824B02A19DC91FF17C8E0FD57479E00
-:10B22000786D329E733BF2DD3F8E3318FC8D4F5CA0
-:10B2300044F7EBDFF8FD79E387B3C7515E330127AD
-:10B240005E197E5E6CA7C48D97C7C5D3C38FC3DF5D
-:10B250003DA6A25DFB9E0403B8CEADE87B5F457FB3
-:10B26000648F0903489FDD3B5EDEF36FACFC16E3A1
-:10B270004F200F7FD8F827FA68FD666A923D57EC99
-:10B28000787901E2BB1206683D1DC2CF038C9F0D89
-:10B29000397E7ABF1F85132AC663573EC4F8770EDE
-:10B2A000F291F1EF9CA1FC7B0BFF337B28FF7E101A
-:10B2B00075E7091D85EBEFADC48DDA1D63F3E6314B
-:10B2C000E4F61186BFCFC4D60723D17799C4F1EA3B
-:10B2D0008C9AFF19C579F548C9207F17227FBF7363
-:10B2E00074323A39AFFB073E8B74187822A0E3EF33
-:10B2F0008FB8F6895FD13C3BF2FD675583F66D2030
-:10B300002ACD626518FCD90FACBC82C7B661F9D6EC
-:10B310003F2F789ED55F8EBF204327BE51790F9B6C
-:10B3200077C487CCA52D06AE9B990A1AF78A0C9F85
-:10B330000F2B32BB16E3BD125EBA4BA5F6BD9E398C
-:10B340007EE27D4F2B76BCB800E5AE103FEDF1EB11
-:10B3500038FE73D9F7ADEEF9EA855FC1E627AD5344
-:10B360005EFE6676FD373E8FDC1750F07CC51171AE
-:10B37000DEDBCBF71CFDC5F9F751EE33FDD93BBF42
-:10B38000ED7D2641A7C2F2C1E7F948E31B2DFDDEA2
-:10B39000881ADCEFF6D0F1F089FCFA7F7C295FB7E0
-:10B3A0005740BA054D67AFBDA240D29A589DC3F72A
-:10B3B00030DA170CDFC30FCA14F7E9EADB4D7ADC89
-:10B3C000AB2F561488BFD6D9FDEDDC750EEAB5C398
-:10B3D0004FFD90E473C5432FAAE877ECD9F63DB54D
-:10B3E000BF3E371F707DC838E87DF8E15DE7707DAE
-:10B3F000903FAE3553B4BFF27177FB2B1F7ADBD58C
-:10B40000FE75561FD90B23F5F3A6625E81E37D73AB
-:10B410009F9FEE137CB34FCE1BE79E50EA77D9C1B6
-:10B420005DCF2EF8359E676DD81FA27B1477749878
-:10B43000E36F41FB6DBF5FEC1F9ABF43BB74C7B3A3
-:10B440002103EDB41DFB2FA77C1EBBBD1F78E8793F
-:10B45000EE016B5E84B5776E7FA201F345BC7AA3E3
-:10B46000F120F3F71C7270E3B32DE351EFA37F6C6F
-:10B47000A0E3ADC4E91C951C5D4079E2B2EED38334
-:10B4800079D76FDE9E3F9CA0FD1C3F134CE7BDECBF
-:10B49000179EF8BFE4BF77C5F3C7FBEF2AB5F7BD2A
-:10B4A000F9EF77B2DF6F90B8DC58CFF07D8E42F3C2
-:10B4B0006B5B5B2C5ECB4879575B631CF77396978D
-:10B4C000F2F8C7D4572C1F9E0D99DD6F4CC7F14F72
-:10B4D000843EC0F3FA3BDA74821FE4FF4266519760
-:10B4E000E37DF3104738EC17FDB5D1F67B73A17EF1
-:10B4F000EBFB882EC5F4AB9D44BFEB4BF979E953C8
-:10B50000E9377C127406DC1D2A62BCDE3C296FFF21
-:10B51000EA349EF7E5ED6F4929B733EDFD039A7ADA
-:10B52000C3C4D5FCA29DCF941A2E7902254BF74FA8
-:10B53000E7F22A32527703EECB0D9E174E688EF358
-:10B54000C2EC3B9D175E63F23C56568FE6418F88F6
-:10B550004FE03EE5550E7C9F15FA2350958AA1FDDC
-:10B56000D58DFB0D79F4D8F342CEBB23CD943FB2F9
-:10B570004B9F5EDA3FCCBAA1ACBE6B86F35CB1A246
-:10B580006725D7FEB0F932DD8355A8BE77DFD0C678
-:10B59000BF7BD797A006F35CCB13D09107CF3E219A
-:10B5A000C708578D70B124B43BE0D4181FA75DEED7
-:10B5B0007E9FDF73FBFCAD07BB515F16A2D30EC1AC
-:10B5C000CF6731116426B96F1AE663F6447CA4276D
-:10B5D0007B82F9EFA3FF45CE2EA0FA2A9E5FA478C6
-:10B5E000EB3EF21B8D132F9878BFD1ADF52AED0BF2
-:10B5F000459AF653F9A8E923EBBF107DECFB08064A
-:10B60000CB05E24F8D3AE7EF6EF311CA6FBDE16CE7
-:10B61000D5182E9F22B47A5A1CCFB36BABE7C43136
-:10B620003F2254C77F9FC2C6F3793C6D6301F998EE
-:10B63000A573F958FF453B2E992539D938CD17C444
-:10B64000E7FF075094EC5E00800000001F8B0800AD
-:10B6500000000000000BED7D0B5C14D7B9F899DDFC
-:10B66000D9D92730C002CBF21A10140D268B226ACA
-:10B6700035664134F8885915A326185763521201CC
-:10B6800037D636B4B5611010C447486349DADA7664
-:10B69000A5D892366D31A58D491F77D5E8B58FDBDA
-:10B6A000A2318937571B34DE5C494D2F7DA4F5DE6E
-:10B6B0006BEBFF7CDF996167965D3069DA5FEFFFC6
-:10B6C00077C92F999C39E77CE73BDFF9DEE7CCD9D6
-:10B6D000A3DE6909830E426EC0DF1DA39FE6862F9D
-:10B6E0004EAF981E2EB7E5C473FE224276E63C4E5E
-:10B6F00006E9D37CBD91F8687F334FBC7DF499E8AF
-:10B700002547139CB4EC9D986BCEA54F0749379401
-:10B71000D07E6513B91DB9A3E11FCDFA84EB12EDFC
-:10B7200097E625E9F06C2B13D20D1A7C3A3F1320D3
-:10B730003E3A4E6B99B016F034873E49A4384DBD61
-:10B74000682064067D5FDDE9F5D276F42FDD47EBF6
-:10B75000094FD25768DB71644D5FD1E8F1F78B1C5C
-:10B76000212984EC56EAF7CD7EFB990728FEA257E3
-:10B770002A365230FB8E0E91BCA9B41C1AF27230DC
-:10B780002F27996625A3E140BB5CDA2EDEE5271B57
-:10B7900000CFCC41E2A7E3C7170E1298BF4D22920B
-:10B7A000414238887FC2AC6122D3760973075DF2CB
-:10B7B000540D9C3F1BA3E27923C18078DA1A4A3CDE
-:10B7C000F9C984581AE679F2E9BAC4F10344A470BD
-:10B7D000E22446FFC87E6F2530FAA874E92C9B98B6
-:10B7E000E08F065F5DDFC653A9BC49532EEB5C03B7
-:10B7F000F43739FD32CC3F7E16A38B5A1F2F0D1222
-:10B800002F1D379EB0799212E23D441F712532817F
-:10B8100071E8905EED7C362AF4DE28B2F9C09F37DD
-:10B8200015DB11425FC579170E196F85324F2E1542
-:10B83000B2FA1BB90417F49245291B479763CD67E9
-:10B84000BCE7AE46422E69E66BC9A4F357E1D27F4E
-:10B850003B4D241DE8FB41E926B806911FD4F701B2
-:10B8600065FE26E720D26714FD8A18FDEC458C7E24
-:10B87000F608FAED52FAEFFA07A3DF089D38C31A6B
-:10B88000E0C3483AAAEDE78DE02DE393F623E423E5
-:10B89000505E5609F2DB6965E5FDE25D9572119334
-:10B8A000AB71E485103721A59D37DAA0BD5B14117B
-:10B8B000AE7913D5070E4DD9AFEA0736AE23D7536D
-:10B8C00049283F935C03394449DA3E5776C17A757B
-:10B8D000A0A484E1BF2A4EC0F66D9260E06EA3CFB3
-:10B8E000530BD20885DB6CE9B4C07CDB4D9D08A707
-:10B8F00039CB207647D16FC794F91A1BECD37BA6BE
-:10B90000C7A6A35120FE6872FFA6D2BFF9E8E74F91
-:10B9100019297FF092205929BE20F46FA9EB9B478B
-:10B92000FB93BE81DC5C18271EC7712878390A0C8E
-:10B93000A429777C3CBFA5F015DF601D134F1EF0D6
-:10B940008CA267543C5B004F676C3CED59E5C8A77F
-:10B950007C8303C7F99128A17E729802968D747E2C
-:10B960008EA604A9893E77F181F66A780E98884CF4
-:10B970009B9888F75439C59B9F3A8D100AA7F5E22A
-:10B980004CCB04E0FD864EE2D3E8F94D36FF05913D
-:10B99000C2E3453FF1533C7947C00B68F42A7CA0D1
-:10B9A000AE1B294C2264361DCFCF4F077D6AF70BA3
-:10B9B000F854E1A87C623779895804700CDE207D48
-:10B9C0005A00D8EC70BB8F2432BA35CF0DF908D8A5
-:10B9D000B9629E809D6B33794F6DA0E50E3A9F6EE4
-:10B9E000FA6C51F846EDE74E4C647CA88C6F2355F9
-:10B9F0000921806D7CCEE51FC31EDB806EB47DC344
-:10BA0000F9DCEFBCACD295FEFB3F629CF3ED5B90A2
-:10BA100077D3419EDF2345AB0D86D870FED4287DB9
-:10BA2000E7658DBE6A20CC7E1022A52D9F1ABBDF54
-:10BA3000EE46323DBF205CDEC3072C409F36C7D6A2
-:10BA400053B9749EB2C7E02990004C898E4E914F35
-:10BA5000429A70DD4DC403CC4B9A33CB4F954BB01B
-:10BA6000BE2B5C8F43B5D1C1535B4B4C1349D008FF
-:10BA700074919C3AB9DC64637C13B9CED6113A1E3A
-:10BA800018938E56454E22E9989FF8BF938E2265F3
-:10BA900027E4D7B8150921E8779CFA49747C92A964
-:10BAA000973FB59FCAEF91F3AFF85F3EFF483E194D
-:10BAB000DD5E56ED267F9436CDF093600787659F57
-:10BAC0002515BB5218543E2DA126304D59D57DE980
-:10BAD0002708D8E716F16D0BAA2ECF8DE4B1E0F35D
-:10BAE000E46D959EC6F0785AFA18C0EE9C32050FA8
-:10BAF00071613AC589F7BB8E920F4EA7B6CCE7C5E8
-:10BB00000D1AFB71592CDF9E48E9B213FCDA28723A
-:10BB1000B03EB15C4EA4780986E8FA7C3FE835F483
-:10BB20001B457E011DE78E613D9D6E57E8342FED6C
-:10BB3000ED4FC334A996E40955C8E53E4F05D0AD95
-:10BB4000628D0FD8820819D76FF1233F54884017B0
-:10BB50004E9E64B861BF79FAC5A2978323BE687808
-:10BB60007F455CF1259897A388D24DE37F50411023
-:10BB7000DFB66BD6C5E11C87AFD8BA1DBF90669003
-:10BB800069D336972108F18C8904DA81EEE4AC910F
-:10BB9000809F961A4AC77AB32B2F08F62E35642554
-:10BBA0005E8C13C4A095B6EF5A7B8F07F5D3B539D9
-:10BBB0002444F906751965323ED31B027F9A17A5F6
-:10BBC00032A304E33C6681F8A6CDB52281307F9B89
-:10BBD00044D35F7589FE17615DF96BF3109EC1E276
-:10BBE000453FF166E7F3F4CA78027E80F53C1734EE
-:10BBF000535C9E5C39AF7D90CEC742E23ACDF4D91A
-:10BC0000CCCB21B063F279AB04F4DE5A20DF69A01B
-:10BC1000CFB25F590B79FABE9DB379800EED0574F2
-:10BC2000C9299C3F7DDE1E24B4BC73E5B2E10480CB
-:10BC3000D36394A07EFF8DC06DE04F59AE3F81F17C
-:10BC4000A145890F091F9809EB67FD807A6237DFEC
-:10BC500089FCBF2B7F9A45EB8FA7DBFCE7812E6A1F
-:10BC6000D9EAA2FA6D3AF2D3A541CA4F0699233711
-:10BC7000287F5A1CDB5C2724982F7DAFF2476EB8D3
-:10BC80005D586EF56527A535F89994C316815FD97F
-:10BC900006FA06FD562273504E67F5BF7DF2EE455B
-:10BCA000E087B659D5FAE58BBCDAB2FC3FA7B0BF46
-:10BCB000E2F7162525ED82F6CE0C1260F4F19155CF
-:10BCC0001A7F464AE2510E7B12BD7F4C9C319A2F5F
-:10BCD000DBF3195F1EBFD05699077C4AF9D22C01BD
-:10BCE0001FEED2C5C9EA53E5C3B67CC667B1E86E9C
-:10BCF000BA564C421A3FD0E4EC447EB4387DE84753
-:10BD000047B6BF2B99E90B95FF2D2E82F26091FC6F
-:10BD10009F7F10E5C3E101F133E7070847F9C42429
-:10BD2000B27878BC79C4C24FE5FFB6FC3C19F8F58F
-:10BD30003D913A1263B4375D2BC1F9D4257A7392E1
-:10BD400034F1873387D23DCA7CBE98C4E6D3EAABD0
-:10BD5000F63D48E17A6B2419E5C6453C1D609728FD
-:10BD6000FB83DF49FDCD5B9252B4740A307954E015
-:10BD7000CB5CE0A809E4DC49FBD1B72DE487322C89
-:10BD8000BDC919D4C9F7BE647F4992867F7991C530
-:10BD9000870B8C0E03F900F47982C665A14984EC07
-:10BDA0006D14F1B9A7D185CFF646099F1D8D5E129E
-:10BDB00032D3F0875C3BF700F8D90E1BE2371E5FE9
-:10BDC000B4367AB07F4BE32C068753F9BC7017F07A
-:10BDD000B5CDA0CAC9AD584E30AAF525BB30BEE3DB
-:10BDE00058FDD6A4DB514EE87C50EFB58F33AE3111
-:10BDF000588AEBF7FEE12BFA5BA1DF13B77FA23283
-:10BE00000FF8EF7523D1E63146F14B888D77B3F00B
-:10BE1000DB330DA84F9FB87DE7A95CF05B5FA3F013
-:10BE2000C7E2C74E063F263C15DFA3BB105F335D5C
-:10BE30006F2B85671699BE8F250F91F3A54F82F260
-:10BE4000E124A8A79F38BA961C07F9A4C35A4590C5
-:10BE5000539F17F25D420BA5B107ECAD2FF455B01F
-:10BE6000B734D03944CB822237D4ECCBC7291CC19C
-:10BE70006B211DB4DFD1DBEF21D0AFED650BC589A0
-:10BE8000DA87E43CE4776B411569A6ED76565A896A
-:10BE900091BE4F98B78600BC9DBFB022FCDC539387
-:10BEA000515E77894C8EC6D5432E030969EDB8C51E
-:10BEB000162EE781BEDC447C5351AEBF90A4D18FD7
-:10BEC000D44E7E19CA02A990090776F8210FF343D0
-:10BED000587D4FA2EF206BEFC3FE61BF304044900E
-:10BEE000D7B3C66007C49BC65A74FA161A0F580611
-:10BEF00051AEBDCBD24B09713014C82E4F886403AC
-:10BF00005DD28DD417A32F3C020951BBD149FF014B
-:10BF1000FCF8F343E7C9AD84A4AD1174F3E0CFDBC3
-:10BF20002F1A6E05FC587BD50EF1E7EBEAA03D4FCA
-:10BF300034EDC13E19AB13C68A6722FDF81F2529CF
-:10BF40007EBC9D6481DD6B693C42DE3285E1F0118F
-:10BF50007925F5A9FAF39B930D7AFF4762FCFD1250
-:10BF60008DD3811F5B5F3592EE28FCFD87A45C9D1D
-:10BF7000BF9BEE3784E747FF7DF982B9BC4BC79F73
-:10BF800063AF7F468DBE7F56C0A6A3634E4392AE7D
-:10BF90009C2BBB75ED27B4E7E9EA0B3AA7E8EA2743
-:10BFA0003D334D579E1CFC88AEFD2DBDE5BAF2D445
-:10BFB000BEC5BAF6B71D59A12B1787EED5B59F7E22
-:10BFC0006AA3AE7EC6C023BAFA99E7B6EACAB30737
-:10BFD0003FA56BEFF28BC78E807C527E34527AED98
-:10BFE0004A979F01FB39D84CFDB879CC3F067B4B73
-:10BFF0003289E21F53C3940A7CC5FE5AC00E809E4C
-:10C00000DFF3E9D067D04E1A3C20BF7CFE42EF46FA
-:10C01000E8D7221A884BA347A48504DE97EF49C4CA
-:10C02000F7DE9226940F819A0D6B3CD86DFD7A1045
-:10C03000E376D207F8BDCEF0E34539AA7E1232F599
-:10C04000FC6F26F725F8C6F0FB4C92BEFDFBE5FF22
-:10C05000AC64CAFFE0706451FE378EDF5FE5FB47DA
-:10C060000CDE09C92C5F5E71D6A98B7B90AE237163
-:10C070008F85B4803895550F679C60CD95F8C66C58
-:10C08000B871CBCDC73791F2459F94E6749D5C4C57
-:10C090005FABFEFD687B385DE79F453E9BE31F413C
-:10C0A0007D47F5E2EDC93ABDE8F32643DCC77B5195
-:10C0B0002FAAEF737BA7A05E6E17999FD22651B966
-:10C0C0001C835E917AF9F34912D39F31F4B340F5A2
-:10C0D0002C18DC9D2BEF6F07BA79B711B44BD4063F
-:10C0E000A19E8D844FFDAA7B006FC1C5FC29351E22
-:10C0F00052E32D0BD51F105F592482F432537AD9A5
-:10C10000D13F7A0CFD4B3A0F09FC23B393FA9F60A1
-:10C11000EFA9FFC9FCCD0FD7BFCC56E63D4217C5EE
-:10C120005EF6D8BCB5C929B1E1FF20C67ED4CB49A3
-:10C130006ADCFDBF93FFE6264B887F241FAA7C663E
-:10C1400006A6A3E3BD27B175A7D38AE7D4FD0B09E3
-:10C15000FEE3477E3931EB8C3C1FD6CDEFF09AA938
-:10C160005DDD376B05F61326F004F44CDCE086A5A4
-:10C1700060274909D31332FD07F8CD56A4D71B9683
-:10C18000083B2A803D8E1F6D7755FDA0C6E7E3E989
-:10C19000976755FD3293CCD4EA975871B8AA5F548B
-:10C1A0003ADC71BD5144BFE33AAD57FD090AC7946B
-:10C1B000C5FB20CF2C7888F76014F9FB27C52EEF3C
-:10C1C0003D66C5F8DBB146C038CBED0995019FBA95
-:10C1D00003C403F4993518227E0AFF0527E34FB7FD
-:10C1E00027C881FFEABE1CE400CF2E13CB0BB9B7E2
-:10C1F00005396DDEE8DF93593EFB4F171EF3C0BAD9
-:10C2000097E738504E3FF620417B3DE0DAD859069B
-:10C21000E3CE221E334E97276E289F3307519F7817
-:10C2200006BD024BC1C97174E82B8D64DA261ABFB2
-:10C23000BFD368C1E7D546119FF3730E1CBD83C2FF
-:10C24000DD9A6BC37C416B9E0DC769CB16900FFFC7
-:10C2500098F5480EF805BF697461FBF6C703859031
-:10C260004F683BC6F68332BCD3711F14A9E6027C2B
-:10C27000426C7F870FB860DF37E3F84FB05D9BC932
-:10C28000FFAF1B283EF25AC17348627480F9B6585A
-:10C29000D9FCCDF680279196CD13C8FAE5D1E451AB
-:10C2A000A107E524A3900A7940C6A7C22CA909F2E8
-:10C2B00021542BF451F488A935C8C1BE077958948C
-:10C2C000202F9469091EA5311FC9AC113DCD04DA98
-:10C2D000136FD0115E0F9395F80E3BA05D887B9491
-:10C2E0008EDBEF64FB13EE736C7D7E7FFECEA35975
-:10C2F00024B61CEF69AC3C53A1C9BB3A48F4FDDF3E
-:10C300007373CAFF027A087D045CD79963DAC19B14
-:10C3100085EB75323D75FCC2A434F08B1BF8E8FE4A
-:10C32000A45154D7494A8378796B819496E8D0C256
-:10C3300061FAC278EC455C2F7B5110CF17347FEF48
-:10C34000F5FA4F53FAFE8E7684BCD4CB173E8A7131
-:10C35000E2BB49D213105FC93F351258CF77BF3FB8
-:10C36000F32449183DEEAF1B4F25F19ABCD1BBDF3A
-:10C370003E5D6AA2F0DF7DFE74298FCA26A8D353E2
-:10C3800075375E29853C95D0F07BF7658AAF5C4EAA
-:10C390000A0350A68E32C69B72DD92D01874EB4A07
-:10C3A0007DE851C80B069B1D2247FDB2A7ED7F110A
-:10C3B00080EF1A007FFADC6219DEC9D125FEEFAEEC
-:10C3C000B71757D078722B27CB0E0EE8269B217E0D
-:10C3D00020E7CD1EE09BAD05CC2E6E7D580CCAA08B
-:10C3E000AF42012FA6852CAFB82F537D6BFD79107E
-:10C3F000F6FA490BE79B1F0779BAA904F97ACED55B
-:10C40000400EEC1F2712210FF8D06430229CE10B64
-:10C41000F66037EAD9C04CD0374D171E9B04EBF5B8
-:10C42000FB64762E40CDAFA51A024F56E7427ECD73
-:10C4300083F9B5DD7C1FEE93C59AAFDDC5F60FF825
-:10C44000F944898F7FDB119A1BE60755BE22FBED6D
-:10C450006F249E7CCA5F2F355A3C30EE671B457CAB
-:10C460001E6974E1F38946099FDF6F2CC4767B1B3C
-:10C470003D58DEDD380BCBAD26B2DEA7E1B34F3839
-:10C48000D93C5627947DC2499FFD14EE65DAAE97DC
-:10C49000F687E79CB341631CA5C79C2B542F4A50D9
-:10C4A000DFEEB94CE17D91C283E7E87A4B31BC2FD6
-:10C4B0000DF685044ABFD222F6BEB7B157E977041C
-:10C4C000E1D27AA47FE955566FAF6570EC57D4F688
-:10C4D00085C5CA38C5D09E8E5BACF48B848BEF29A2
-:10C4E000DCE268F844B6A7DEBC91942AFB1410D7AE
-:10C4F00099FA38F067648E840EC17EC6F9A7CBC066
-:10C500002EEC29267906DAC894D2CF41B9B78188B2
-:10C51000C644420AD3A7759401FF98BCF85EDECBEF
-:10C52000070FE5A21D42B8AA1DCAA80D79817FE2B6
-:10C530003D24CF584CD741BA84F686D035B6CFA12A
-:10C540004353F1B9A4B1B337E87FE0BC01AE0BEDC2
-:10C550009F5EABAF1FAF3DB52711F5D1F9EE833E1E
-:10C56000BFD8A83FE7D15547B538D51B5D8A1F76A0
-:10C5700000EA61BDEA4A133642F9D187D2416E7FA3
-:10C580004F5C1CECBB8FF48BF0DB0E349E4AAD2865
-:10C590006078037D32B78907B5FE6CA64CF9552348
-:10C5A000077B037C6537E611FCE92B34F14FABC9FF
-:10C5B0009F4E8597FCF6A9D717817E00BB0C7AFAAF
-:10C5C0002357981D1FB1DF57997E54FD064159AF7F
-:10C5D000CF95FC2E04722F833D02FBE4F19372DAB7
-:10C5E0003F658681033B448AF5EF9D02C3CBED0A8C
-:10C5F00072504E76FA5E06F9E1939E21C0477FE8BD
-:10C60000374BC06F7B8FAD2D04FF790B8997ACF44E
-:10C61000BDFB871705C0A3D5302810AACF86F66FBB
-:10C620005BCC537FA75550F4243838741D5B5315E9
-:10C63000BD20FFB1A302FC0D837F08B67AD5F65D5D
-:10C6400036FFA350A67F5E0BB5DFFBADAA9E0D742F
-:10C6500078298FED37B1F2D0FE2D1D329669FB623D
-:10C66000566E4987FD296FBA81D22BBEA9AEE3541D
-:10C670001694D5F6751D72265D4BC59E12873F1721
-:10C68000F4DE4859A4E5384D9967656261CFBDC7AE
-:10C69000FE4B807DD3D6D4E1931940CF1F737DA08C
-:10C6A0005FEB8E3F7B14CAF53544823C9CFBC8414E
-:10C6B0005C87678D6543CE1490E353223AE4F0A77C
-:10C6C000AE0BF54727BB08E68D852017CC033FADA1
-:10C6D000A8D3807EDA76EA5B1703BDDB53619DE762
-:10C6E000A4323F637290C2D1C8C1649E86EFD3C0AA
-:10C6F0005C998607B57115F118005F2439FEE7DCF7
-:10C70000E210C5A777966C9B42C7DBBC81F7344922
-:10C71000607F824DE08F91231CDA89DC53E93BBEB8
-:10C7200041CB57FB92BB21AE30ED607CB039B72FC7
-:10C73000751A7DB65A997EDD9CA89413F5E516C549
-:10C740006F7425CA8949F47DFD9127B3658AC7D0E6
-:10C75000A199182FD6ABF8C87B1783BD1C3A3A3B7A
-:10C76000610E9D6FDDCF59FEB2AEBF7831CCBF6E8A
-:10C770008F8140BC56DF4FF9492B1F540EBD93E803
-:10C780003CBC9D5378CA1F8B52739758E9FA3E9B65
-:10C79000E715815E1BBAA6ECB6D020E859419C0C87
-:10C7A000F2B2A1CBB31BF869F38C4BC88F96CF794B
-:10C7B0007E569944E3AF7B2B17835A4B3530B9A48F
-:10C7C0000C877ACE98B80DE9FF9F6564D89C88E401
-:10C7D000C4FDCC1CF83F8ADF24D15B0EEDC5A53427
-:10C7E000F4013E157CC7C00F91CB2D980F2D1797E4
-:10C7F000627DF61A62E8A0F81C9492929A68576BD0
-:10C80000BED7007E4A9ECF86794E635CC50E909B54
-:10C8100043675939BC4EBFC275B21506FB2C14CE06
-:10C8200044072F42CC916AF45A60DDA82C0F1C2AD1
-:10C8300001792168BFE5CF16615EA72B9ED43C4FDE
-:10C84000E9D463D8D8F113DAAE27C949C0AF6CE593
-:10C85000B8F52BF07DF994AD146E8FB27EC6448F7F
-:10C8600008EBD593A82FEFE7363E0C72B4E5732F93
-:10C870002C86F9A59ABD9DC914BFFACFBDD0E19A07
-:10C880008D74CEB350BAD4A7BCD061A174EF69F255
-:10C89000BA454D79D29FA9B6C679BC8072CA277EA7
-:10C8A000F61190635AFF530BE5DF6793547F80D5F1
-:10C8B000E7E7A9651ABF521D6F6C1A29CB16AAFFAC
-:10C8C000F335ED2BA8DC7EEDCB46A2C20FD1B26DC5
-:10C8D000769FC566C479101BF8335379F4676C8969
-:10C8E0006C5D6D93F3D04FEAB1327A0D6719B07E6B
-:10C8F000A1F13911F200E6C9BCC18CF173C0672AFD
-:10C90000817D579EB0BCEE01EF6409D2A36C1F90ED
-:10C91000EB5C8E71A0B550B3EF47205ED5EF13F2FC
-:10C9200011E502F360BA81DA61E7F9E55C36855713
-:10C930009BA2C4854E920E79D7400AD3338FF9E477
-:10C940003B4D12F0D8203B9F4A7CD3E099B62E3F56
-:10C950006DAC7385A3F7FF43E897ED711814BA49DE
-:10C96000BB43D4476D763C2F821EA1667EC701F083
-:10C97000279D3CF24D01C83F2D6F4B64F9F6DCDE7C
-:10C98000C54FCF02FFF0748101E49F173D229CA7A1
-:10C990002B8B2B4900BF8D1FE1D357507E8D4767EE
-:10C9A000DF0DF19E00F24BDF1EB0B273A0C3E9A40D
-:10C9B0000FF2BFBCCB4BB4FB81AAFCEE6CB4E073AE
-:10C9C0006FC98A6FC03EC1D7DB09EE07082E1F96DC
-:10C9D000A516C2815C1C2FBD17C7FD2AEF4B580757
-:10C9E000FAF62CF3EB815D309F117A8A837CC67B4B
-:10C9F000165F02CC7B5FA2DE9EDE96CAE2613985BD
-:10CA0000E9CF3625DF295CBB05F337AD26551F5925
-:10CA100096807F2AF07E3C2F6BF66FF382BEB210B9
-:10CA2000591635F9704BA63EAF255CBB15E1C829F8
-:10CA30006C9CC873050E4E854FD7610C7F597D469F
-:10CA40009E4368203ED44764809D6FD8B66B7E5A63
-:10CA50009206CE36CE9B268EC11F5BAE194950730F
-:10CA60001E650B3F2CC07CB65C13F03D710DC637C4
-:10CA7000C1FE0B65B80E58C717BF8B76C9463A433F
-:10CA80007060CA0CF908CDF94FE2E28747F83F2FF2
-:10CA90002C1FB87FCE45910F495F8EDC370F808DFC
-:10CAA000A57EC50EFB6F0498E7BBF3C930F89384ED
-:10CAB0000C2E04F9AD9B6FC37CF416D269B1401EF5
-:10CAC00085EF14B579E1BAFE8BF1708E8E2EA90434
-:10CAD000FECD961F96E9F251EA3930B55C7F6403CA
-:10CAE000E609B7F45C15A694201A03261A8FD559C7
-:10CAF0003A4F99F3C2EDAD26BF9C01FCFFC347BD81
-:10CB000019F4D5D7004F383FD5306126C47F7F1048
-:10CB10006BD2814E765EB11F6B2C683F5AAC345E8F
-:10CB2000033EBD3009ED29ADE6C13EABE32F56E231
-:10CB3000E221F02F6640D73EF4D35B6DBE2B609FA1
-:10CB400080B179EAEFB426A97CB3AD03E4A74B0822
-:10CB5000EB45F09FBA6CAC6CEFDAD6D1C2EC30F397
-:10CB60006F9CDC6EF06F5A157F6968FF75F48FBAA1
-:10CB7000844EE6FF7DDF2C019E5D369F07E2417902
-:10CB8000C76409EC49459A03E7617AC1DC0DFA30C4
-:10CB9000D9E9BF047E0B7132FFE8DD94F3D9200F91
-:10CBA00051E00C733703C7A587639DCBC67F9733CE
-:10CBB000FA769484DBD1FE21DCFFBFCF82791EB5EB
-:10CBC000FD01935EAED5675E2AA327E813906BF54F
-:10CBD000BDE0DF84F26B2601945FB34BBF2FA4CA84
-:10CBE000B3706DB22E4FF9B514B63FA5EA01E15A04
-:10CBF00011D6CB0A9FEE84FDF231C7498A31CE743B
-:10CC0000D413B1C72955F40851F2BB3C9E2753E514
-:10CC100024B6BED0E76B23F59FFA54F5DF17143E18
-:10CC20003E6DF5CF4BA5E33C12EC5B68C3DEFE5BCB
-:10CC3000617DFEA4F06561EF93C780FD2E8BDE4F12
-:10CC4000A5CC807353DE6FA4A4BC7FB9D990CAE68B
-:10CC5000335A8FB1FCC3B68725B4CF5FE53D364F5D
-:10CC6000143D5673CDAED35F19296C9C1A5E463DB8
-:10CC700056732D1EEB3F387C2B094E1F0BBE03EB6A
-:10CC800047E0F731F8C74B7FDA350BE01F3619CC98
-:10CC90009A786EDBE105699097DC66A57AD9A19355
-:10CCA0005B2FC82D9F4B46E22090F37D23F5F37751
-:10CCB000837FF3AC56CE6781FF15EECFD375DEA729
-:10CCC000C83D9197446F6F8F683FE25F5561FB48A5
-:10CCD0007C543D0265F0B7F83F9B55FC500F3D6911
-:10CCE0008880A7FA637235C2DB3C83F919969407F2
-:10CCF0007F26E703FF05CB200E1A7E9848DD6434BB
-:10CD0000DD2D0A1FD65C9BA05BD730BD27EADEFF76
-:10CD100047A38B0435F2F651FFB6856897619D00F5
-:10CD20000E917762BF031924A891BBFFC3E383E28E
-:10CD30003127061EF3FECE78E4EAE4328C47BEEEDD
-:10CD4000FD07C5C368B9E6BEAC299B4492A12D1767
-:10CD5000872C1997357ECBF453A2AE3C63C0A56BEC
-:10CD60003FF39CA4AB9F3D58A8AB9F73C5A32BDF9B
-:10CD70003E3C4BD7FE8E6B5E5DB98C2CD2B59F6F5F
-:10CD800059AE2B2F10D7EADA4F54F2E477BA36E8CF
-:10CD9000DA2D921ED6B5131A92BF03FECB1DD7EF24
-:10CDA000B0407CB1D361A8847D879DBCDF921445DF
-:10CDB0003FDEA6C01DB177AE54ECBF400CB4803E40
-:10CDC0005C4043E166EAAFA555FB5AC0EE578A2C9A
-:10CDD0008FA8E6CFC9F59515F0FEEE4544EC480C5A
-:10CDE00097EFFC14215036677AF1FC9AB5C880E7BA
-:10CDF000037617AD1873FF619FE2BFEF89B0F7EAC2
-:10CE000033C1C8CE4946BE2F48637EC29377EC2318
-:10CE1000B04F607104F17B9EA39377BAA0FCF41D20
-:10CE2000DF76419CD13EF9132EE09FB6ACAFE9CE40
-:10CE3000DFD9F2097EDF110977BF0237FFDA631607
-:10CE4000B09FBB33193D23DBA9E7D0775B58DEFCED
-:10CE50006F35CFF234263F1FF63C2F2870775B8268
-:10CE600098FFEF28FCDBE05F3D82FFE384E1FB38C5
-:10CE70009E376ECF1224AD9D559FF07D28CCA72DF7
-:10CE800077A70BEC6E7BEE2774FEBF399FEDAB45A9
-:10CE9000F6E35C6CDD768B7FDBF93CF657CF67679A
-:10CEA000D4FD754B8C7915A8F3720591CFFE56F31E
-:10CEB000FAEC883CFD7DE6F5A2325E7C1AF34F77F2
-:10CEC0004B4C8E128CBE5FE6E5C696BF8459FAF3D2
-:10CED00048711E7D1C9097EF1BF39CD139853EB1A4
-:10CEE000E4758D494E013C5E6B64E769CF021DE934
-:10CEF000F39C7F42397C97F01A9CCBE2A0FF8EB85E
-:10CF0000B1D661ADDFA8C3733CFD30258D9DA75C14
-:10CF1000BD46DF6F95CFAE3F17A59C27A0747A0260
-:10CF2000F2CB2ADD46ADF38744A758FC76B374EA0A
-:10CF3000287C7F741A8FBFE3D398FD1A8F4E2A1F67
-:10CF4000C582F3FF2B1F95037D6E828F54FEF95B24
-:10CF5000D3E71F8D7FAAFF8F3E63D2E7B19BA48FDB
-:10CF6000AA877A055213ED1C48934B40399DC4059E
-:10CF7000CE2C8238FB2E239E773873A0A78EE469CF
-:10CF8000DB317B7AA6F2AB7578EEAEC68EE7BDDEFE
-:10CF90003078FEA504F2528F1831EF1609FF8C424B
-:10CFA000BF4DAE44E5BC8E9402F47EA366E598F3D3
-:10CFB00023959A79E1BE9A2D5C3652B84442FACA5A
-:10CFC00094BE90173853393D2E9A5D53D72FD6789B
-:10CFD00037BB7E6FD434BFAFF51B6F7E2B5D7937C7
-:10CFE000A51FE1C43ACB4BB17301BD8F33FFBDD751
-:10CFF00040D793C2BF0FF2DCB3210E2098FF5BBD78
-:10D0000026ED20E0FB2F2E76FEA25F90EAF01E9028
-:10D01000954B77C3B988B3AB1239486DA8787C4576
-:10D0200059D7D2EAE8FEE7734A7DB83F472645590B
-:10D03000E72F2AFECFAA6A0EFD08C27BB3B4F77CA5
-:10D04000FC73447D64FFEFBBE2B1FE6C8CF3975F31
-:10D0500057FAAFAE1ABB3FA94D510E618853B5DFE9
-:10D060009F8FF095220F8B5DFE3E176DFF1AE7FF35
-:10D07000D2C7818F263B90EF094F7261FF7F040E6C
-:10D08000EFC5731B97EB18DD23E16AE0BD3416BCD6
-:10D0900058F455E7A58E57427C18DF914A223E315D
-:10D0A0001BC737C279B6BBE793008ECF4B884FF2D0
-:10D0B0009B34AECB0DF3C7798358871FCE2870FA07
-:10D0C000FF7BFE1280D37FC620EEC88D8D772CBDEE
-:10D0D000F0A6C23F4EA37F079C2F20EBB9A8F27D9C
-:10D0E000CE65C576BB5CCC3F24BC3F0BC699B8DF90
-:10D0F0006F9228DC7B94F36784F8B3966BC6DFA548
-:10D10000CC3BB29FD3C8F6C9C9EB4C0FF5763F9222
-:10D11000154D8E5E51FCE65DAE42DD39DF2ADFA3A0
-:10D1200026D003554B979B2407D44B8CEF143C7AA5
-:10D13000057F56B1234CA798FA47A14FFF397F339B
-:10D140009CFB59DFC0E139E3A2ED8CFFD66F3F6A4B
-:10D15000A8A3CF838A1C2E57E450ED6F4F6772D37C
-:10D16000DB6DCB06FC7BB5E730281EF73F43307FF5
-:10D170006748FFE21E99276490234ABEEFC65DB060
-:10D18000EF30A8EC8FE5D0FA26C0B782E1BB7EFB7A
-:10D19000728CF72756B278BF5F20781EE8CDDBE3AC
-:10D1A000823B0086C57BF4315ABEF4E704D2E10924
-:10D1B000F3C75342682AF0474AB3EFE3BE28EBEDCA
-:10D1C00056F0FD8383EDE7C5A28BAACFD5762B78E9
-:10D1D000C914ADFDCA4ABD5E53F14F3687DE2551F5
-:10D1E000F2EA23FC181CDBEEBDAAE8E95722E2A60E
-:10D1F000AA73D1E397D274C6C7BDC1F2CD78BE5928
-:10D20000364B789658C1C729AF467ADE5842442833
-:10D21000DF6D96BE0CF8DD53658CD0C34184B37EC0
-:10D22000A95D37AFA7BA7F3A15BE43CACB67FAF7F5
-:10D23000BD42079E0B7F880404D85FAA26F23C9467
-:10D240004B229980BFCF2AF453F13B4BBC71334042
-:10D250005F3444B79FBE742627677DF357A1DD6D09
-:10D2600031E2B9848B55C9CB200F2EFB4C1E38E61A
-:10D2700074B16565DC839A7555ED9EEADF9CF3CF4A
-:10D280001FD37EADF2E9D7AB57E8C47D40B99C040B
-:10D290000E513E9BF4A5CB7B67D2F299A001EF190A
-:10D2A000C23F2C67A8E7E0099F4AD75DA91A320C54
-:10D2B000627BF90B6C5EEBAA830B606BECBE673A8A
-:10D2C000F7CDA4E587D2993FB0C33EEF7690D75F04
-:10D2D000358C632F23F869E27E9BAE5C7A8E08D092
-:10D2E000DFBF2DBA7DF88F0CBB72AEC8930DEBB0CB
-:10D2F0006E7BF476F64C07DB27FC8BB1265AFCBD1F
-:10D300003B83C9C9FA1A2EAA3EDF9D11C7EA6BA357
-:10D31000C3BFDBADE22166C3BAAC8F81EF1237B376
-:10D32000676FB5AE5E07FAE08A41AFA7E7BA195F4B
-:10D33000B8DD6CFF7BA8FBA5D654E0879D9C08E771
-:10D34000C92E257A2603FF6D68B988F17EA2D2DE48
-:10D3500098E6DB974EDBDF7BEEF913D0BEBF9A7801
-:10D360003829B61DE84A57ED80FA1DB46A0F3BAD67
-:10D37000608FE07F619F15B6FA139260DDE547F09C
-:10D380007C4CB74D64DF3D796668FDEB1E45CF0CE4
-:10D39000F5BCBFF5BEAF46EF1745FA7F4382B4B781
-:10D3A000848E3B44F9AD89CE875C7FEA56ADBD5192
-:10D3B000E521D6B837EB070EF5BC3F3F70BC799E30
-:10D3C0004ACFBD293FF0BDCAA7F6954830CFCE5B06
-:10D3D000A3E95B552FBFA1E8C5487E19D1378A3E26
-:10D3E000B9121C1BAF8F3EA3C7675D408F8F2A1FEA
-:10D3F0005782CD36B8478B8E3E15D659F54B49C569
-:10D400008C9BBA1F24169E57143C7FD560E451EFC5
-:10D41000F57098A7FE55C353F1D1FCFCC8F90F195C
-:10D42000283F007F7C9947FD5350B3E158AA14E68A
-:10D43000C7F714F87F2D1FAAFA55B52791FDFF51A4
-:10D44000F94EB567E3F19D33461E7277BA05FB6F5F
-:10D45000E04501F69176A74BAC4CC4852EF05F6792
-:10D46000B1F3EFD4EE65C33D1243DD36FCFE4BEE67
-:10D4700030070BE83A5EE99E3359BB8ED3DC8A5EF7
-:10D48000AD4DDC095BD7570C9E4569B07E2BD87D2E
-:10D490001E67CF252D4CA3FD9F1A30C08D5864DD2B
-:10D4A000B60D4698DF6DEE446697B79F46BFEFFD19
-:10D4B000F2F5FA80DE9E3F9DAE9E3F657EF8DDD49C
-:10D4C0002F80F384B1E890E3B660FBFB6A0EA33EC5
-:10D4D0007D603B87FA54724BF8FE013E887A99B41E
-:10D4E00030FF9958283DA85EBA0893007A7C8E6375
-:10D4F000E7BC799FA0BD6FE3C13DAB17C0F9CB4836
-:10D50000F9F88EA2C73FEF3628FADCBFC88DF1A12B
-:10D510008F0378973EC9F05DBFFD513CA7FC7ABAF6
-:10D52000E25F2BF2F9BAB24EEAFC9295F99DB70D83
-:10D530006F037B41E5C680E74C5E33225E435FFBB1
-:10D540006600DA89531C18EFA31F4BCBBDCBE282D8
-:10D550004D9ABC9DEAD7E479983C54F15E9D5FF802
-:10D56000903B57E7A747FA1BFF670FD8B3C3FDF7F8
-:10D57000B5075DEE0FC71E04D219BF47DA85113912
-:10D58000DEC9E4F8E2B9DF2D8072A41C7F5D91FF53
-:10D59000BF567EAF74DF8B7C2D2F2662812E3ECA54
-:10D5A0000A421C3CC2FFE1388983736E4F75FF6CE1
-:10D5B0002AE4BB2EEE5DBD2EDAF87B33989FB531A1
-:10D5C0005E32E07D90AF313E8BD41391FD46E42274
-:10D5D000469EB16AC56C8C0FCFAE98930DDFBF45E8
-:10D5E000C607A3DA73DE9455101F3729F1F13E7395
-:10D5F0004D77147C93143F352F7FF804D0FBBD5A30
-:10D600000EBF1F863FAD9F7EEF39CF8F06A5D1F8A5
-:10D610008E94D5F8643B1B2F729CCBEE88F844A601
-:10D62000F109A5F36095311ECEB3AAF1C9A0FCE1C2
-:10D63000C6276F92E17F9909EBDC131D2F3E43E172
-:10D640006BC1BF6F36C56368B1D12383BC18683F17
-:10D650004D5C12D9EF9AC2876F6E7F9FFAE89C3EAD
-:10D66000AF1C4BDE46F0FA2BE5AD5718CE02B97F62
-:10D67000F3E0F50B8FC17C0EDAF0BEB1483807330A
-:10D680008C4A7C60433950ED6FBFD059FF12EDF7E3
-:10D69000E65D6ECF0EA2910B42E582BE3FFF172AD8
-:10D6A000171ED46F28C7BDDDF69A6871CA0F143EE5
-:10D6B0008BCCDB88DDDF08405CEC251E9336EFF475
-:10D6C000BAB2EEAF2A7A292F83D9CF7BAA960B90D4
-:10D6D0002F7A70245F4430B810A7641E84F8F215C6
-:10D6E000E57B0179631CCA5D241EB729741D2F7F59
-:10D6F000B0A65A1FD7DF53A5D71F6F07F346EC48D4
-:10D70000C118FB522AFFC61AEF66ED476FF0FDED18
-:10D710000B8C37BFBA8CDC9BDA17584502B7639E77
-:10D7200083AE0F3CAB4860EA4B149FB79F59897991
-:10D73000F45709A9443FFEFAC7A66AFD927B95F506
-:10D740007EAFEA637701BBBC2E04A646B33F917956
-:10D750009A5783D1CF67F814BDFABAFA5DC53DC6B2
-:10D76000A8EBBB5959DFD7ABC7969BC8BC4DD55268
-:10D77000FDBC3F95212A709A6D7E1657B371BFC0CC
-:10D78000C605BBA5F54B3FF521C9EB20E4EF619C35
-:10D79000ED84403EA55790A768CF5FC565323AE457
-:10D7A000158EBD1FF58A4257B55DA49FF513B7A42A
-:10D7B0003B3754B5548FD76746FC4111F320436083
-:10D7C0002F9D617B79B7D9F330F001714858FFBCC8
-:10D7D000B2DEF7D6FCD604F3A7FAB315F2A1F2191C
-:10D7E0008308FAB3F45CD0A4A5CB6B3719DFBFA6CE
-:10D7F000F80BE3E9D1BCC261D46FEF051DF89DC4FD
-:10D800009B9FF993291ADCAA6B19BAF3C4EB7DD15B
-:10D81000F32AB60CB6DF158BCEB60C49E7A7AEBF20
-:10D82000968DE78363F9FF9FCD6071D07D35075BEF
-:10D83000B5FEFF530A9C07547DC633BF3F56FEF525
-:10D84000A71937977F55EDB3DA2E72FDD567A4BDC2
-:10D850001C54E439B2DDBF65DC1CDF8DF83131F8D2
-:10D860002ED6B86AFCA1E67DF38A68FF28FB32A3B6
-:10D87000C651DA458EF3AF197AFE1E1547C4C8DBD0
-:10D880005933991CFB63E4EDAC9971587F8630BB2A
-:10D890002807ED68C7AEF43CB00FDCBD87167DFCF1
-:10D8A0002498B78F2AF99AEA9AD327204E55E38A0B
-:10D8B000B03FEE6F867DB2A11D1CFA1B91E344FAC6
-:10D8C000E51F853D269047257F5068F4629E9A7C2F
-:10D8D0009A9DF37736AC46FF52CD4FF70ABE1D71C5
-:10D8E000F4FDC4EDBFDD06F6558DE32F993C0FB373
-:10D8F0003C33F377CF773BF07BD7DA1179F760BE13
-:10D900007144FE95FCE378EB31A26F62ACC778FA04
-:10D9100026565E447D8EECB308E28C97E17C2A1794
-:10D92000EF817B99979B09E67D962FE130CE5C6E67
-:10D93000F6E27ED6E9330603947317E7EE067F63BB
-:10D94000C552A3D74A51F83700359BAAF257AA0B04
-:10D9500000CE5374C210C7F6BF21BE07CF5717C4FD
-:10D9600049E0FF9F9E27353969F9F4624EDC41FB9F
-:10D97000BDBCF401E3545A7E8586CF70EF8CBD8127
-:10D9800028DF7FDCB26C7E3E21DF00B89AEF3F5E7D
-:10D99000216AFD3DFB2A281F4D49E937382849BF38
-:10D9A00075E09E7D160ABFB5C9E782EFF2EECFBCE7
-:10D9B000751F7C0F999AEA1DB883FA519D999E654F
-:10D9C000F09D5EFF175478C5FBE03BBC1F18FCB907
-:10D9D0001CAD7F2173D1321EF62326A8F0ABB17E99
-:10D9E000D5C2750FF6D3FA0B07EA97C119F6D26ABA
-:10D9F000A5BFFCB165F3794AEFB96AFB8678283B8D
-:10DA0000ED24BCCF348B1053F83B3F3CF7DE3F7224
-:10DA10008E7CFBB20ADAF7D5B2C07CF89ED3F3A5B0
-:10DA20001DFB8AAC84CCAC2C13BD743EA5595F5849
-:10DA300066877521941F69FD47B20E2C83F9388DD6
-:10DA40000605FE9710BFD26A790AD47372705F65BB
-:10DA5000227C97307812D8724B43A72555F77D4228
-:10DA6000C00BAE8970A42C9481E828FBDA99A1A997
-:10DA7000ECBB3BA55CC8F2142365172BF7EF88FEBF
-:10DA80007DC57F6531FDD56F8B5EDF91A9DFDF4EF0
-:10DA90003847BCCF4591FF8F29797F559E4E403E38
-:10DAA000C48957CC059A601FD6C2F08CB58FDBAE07
-:10DAB000E897FCA604BC976869C08EF7E84CF03084
-:10DAC0007D43A5885F09FADF68403C538C1CDE6B00
-:10DAD000926A23FEC3F49992CCEE39594AE517EEC7
-:10DAE0001F5930C1D783E77CD3D28B9BE19C5DD398
-:10DAF0002F79F0C3D4FEA3F1141F053C538C2B8A5D
-:10DB00001F2DD2D0AF88E14DD75DE9E7FDE61D209E
-:10DB1000170353F2C0AFBE3D536FEF4A07CA4DB073
-:10DB20003FF9AB2C250F26B1FE29F3995E197E54DF
-:10DB3000B9B7C2E229D6E5F5153ACF6F5BFA34B42E
-:10DB4000AB1D3011388FB8ED7099EE7EF5C8672D9A
-:10DB50009C7BD7D8ED5A3E84E7CD6BE1DCFB74802B
-:10DB6000F77301CE39021C880FE0FB0EF09B529A2E
-:10DB7000A3AFB79A57AEBD9648E4E9DAF78C5E6179
-:10DB8000F84EAC1F6F5E6178FAEFF946C353BEEBF7
-:10DB900053E9CE2B7417A2E3F933952F29BDB5BFF6
-:10DBA000AB52554D94F313EC1EDFF3CB8ABAB5F7A5
-:10DBB0001610B2839DEBE0E93A823F3960C3FB80E7
-:10DBC0004B79AA1F9D002F4994B9D17CA1AE6B7FE0
-:10DBD0005200EF231ABE8B13BBA3F8D967143E2E55
-:10DBE0005DCAF836ADDA6FDCA0E17795FFC3F007C8
-:10DBF0003EA3CAC73A94DBBD0C3FF037800F3DA16E
-:10DC0000A9DA73202AFE659904E74FD791D1FF2E38
-:10DC100047B09B0BD36D34FD33C659CF6CAC2F1D71
-:10DC2000382600BFD5C690D3B359F1386EDAB95053
-:10DC30003C9C0F58A0F07F7FDF74EB1C908BA506F7
-:10DC4000C2496CDEE06796CE55F5E73BBF28A7F6E4
-:10DC5000206DA44CF5AB04EB30A26F43164BB8FD1E
-:10DC6000C9AC7796B5803E36B3EFBCA9FF68219A60
-:10DC7000EF11B92C96BF9DE58FBE6FFD4616F34799
-:10DC8000547A7FBE613E798BCEEFAE4C66BF670D96
-:10DC9000CA785F922AD7917A29278BAD634616E31B
-:10DCA000B3BFBD5EE2C6D14BCB15BDC4EA89D35725
-:10DCB0000BF5A906E5FB0491ADFBC69F4C2F803CFC
-:10DCC000DC56975182EF1D56729EAC6FD171AA2C13
-:10DCD000526B9C14E68F2A62911C406F3A027CFFC3
-:10DCE000BA62A915CBF0077EC7EF3A39C67F444A1E
-:10DCF000A81AC3AF55F1D9EA1270BC8DBB0A12FC49
-:10DD00005A3C79DF7398DFB32B785A22EC15AF2F8A
-:10DD1000A7A686EA0C464DBD83D9AF1697774E1657
-:10DD20002D9F56F242A43659E717AD52E42ED22F5A
-:10DD3000FAAD8B287A6205C68F69347E847B02D265
-:10DD4000FA7C781E0C2E322AC0EF76D97DC6970E4B
-:10DD500093B91027A9707C59453AFD5EBD1A364D1E
-:10DD6000A8705AE67B2F6BF4D929E53E7ACA0F33A7
-:10DD7000405E9767117D3FA32F13BE2F2769660F63
-:10DD8000E89B1382EF00AEAF4812617D17181F3D6C
-:10DD9000807C612489CD784EEA20F6AFAC1E2E41FE
-:10DDA0003FF5BA310476E797D9E998CF49B133BE48
-:10DDB0003D610D603F9E4849A84714BDF7CBECC9B3
-:10DDC000780F86AA3FC3DFB5A87058FD096E792683
-:10DDD000DC0B7B2265527133A7F777C0FF09FB4B41
-:10DDE000DFDF77673EF8377D218A33D52A2F2E7BF8
-:10DDF0008CB6DF9C25317ECDF5F5C3B82712890896
-:10DE0000F8CF1AF43F07E5452E3BDEDBA6AE47AA66
-:10DE100081FD1E4CAAF27B2B2027F0B4653339EB31
-:10DE2000529E83D96C3D53E3A3FF7ECCB0D26EBF2C
-:10DE30008DD1B9A34C7F7F92FADCA9C8719DA5B39F
-:10DE4000123EA9D77CEF89DF87F384FA551C7C4FFB
-:10DE500042F03DB56748AFF96DD5F8FB61EF0DAC09
-:10DE6000C27B5C477ED703EEABA2EB1E222B9F004A
-:10DE7000BA0BAF1AF16EBD56133B772724FA45F85B
-:10DE80001E29D91E3DDEFD96824FB291DDCFAD7EBB
-:10DE9000C76052BEEBFF8AE28FC5BBAAD83D45944E
-:10DEA0008612A55F0219C6EF74D5758C3C976B522C
-:10DEB000BEE77FFFFE43710CFFA144E73FA8E346A6
-:10DEC000FA1117E0FE6D4DBE7B9DEBEC02A2697F5F
-:10DED0003F196C0578F76FCBD0E52562F91FC715A0
-:10DEE0007D0BFE821C152F41F7FE028D0365EDF8B8
-:10DEF00057D8F8E171ED44D68CDB96E57D390BFD02
-:10DF0000D4B922DE234C7D76380F4BED0EB3D77398
-:10DF1000D9FD84D42E5582FE56E322907B3101E454
-:10DF2000BAECE759291A3BA9F48BD447772AFAE8C7
-:10DF30004EC5DE249C53FD469BC47161BB33DA6E33
-:10DF4000718A1F1DA91F23ED82DEAFA67C2B6BFDFE
-:10DF50008051F292F541FDCB0931F863E2DFC5BF94
-:10DF60002C9DEBC7F892547204F6416656E8ED3DDD
-:10DF70009FEDC079F1D9769DBD5F51AD6F6751DAE4
-:10DF8000599476E3D1536B8F3823E83D06AF9E63F7
-:10DF9000FC90FBCE19BC4FA9229BF943B7E4781340
-:10DFA000B269FB837F9EDF0BBF3B31DCC4936E27DE
-:10DFB000F4F3F60E3A615E1611E2D4B2B515850798
-:10DFC00069BDE9E7260FC4CBE448F4F8DED1C07997
-:10DFD000375196CA54F460AD93CDABD61912F229DD
-:10DFE0001EEE5A864F66DF518ED7E8BDCC1AD66E2C
-:10DFF00062B649677FA628E5C26C252E21C126F8A6
-:10E00000FD93CC1A2F0FF6CEDDC711E59E4DBC1F38
-:10E01000D5ED61F01D9E20F7405178DEED86E54597
-:10E02000602FDA53ED1EB0175B72FC9E6C90D7F335
-:10E03000A110906DE6F9011EFCBE5D39DE62A0877D
-:10E040003A3FC928BA617FDC7E9EE1D719C1FF84BF
-:10E05000EC56D6A59BE1E7F015033EA9F112DE4789
-:10E0600044FFF2C0AEA62629762395F8E1DE2062B1
-:10E07000A1EDC00FB2D176DAEF3789AF04F609828D
-:10E080002953A7819D5B60F31CB3807D9D963B0D5A
-:10E09000EE177AE940F47CFA32C5AE50FC1769F10C
-:10E0A0008F251F23F7AB2BED4C31E26895EFED95F3
-:10E0B000D1FD556A09985FBFD6792FCCA7B6452008
-:10E0C000708F844AF75D39BE6AC0C7DD77900379E7
-:10E0D00075F795215FB9659E805FD162CB0EC2BD99
-:10E0E000B12D491F4903FAC7C2BBB6C1E8DDA495EB
-:10E0F000E71601D7E360C4F93535CEF87836F3B3C7
-:10E100004339BE5A58E7FA234FE239C1877B2E0ABA
-:10E1100063DDEF73B374E36A58FC52BB86DD9B5139
-:10E12000B696473EDCDC22E0BDACB5CF1D0EE17EED
-:10E13000F17682FBA0B57D874FC2BDAC19B5DE1963
-:10E14000DADF21C8A865F7C7A5521E192842BD29E4
-:10E1500080DD76F72DAF45BE168948908FFCE877B5
-:10E16000655A983FAAD2F7A410CA7E99B63B692097
-:10E170009E665A7FD52417C24F345DCDB579E01E17
-:10E18000867F3EFCBAF469A033E4C55CB01EFE276E
-:10E19000811E1D4DEC3C79C702EAF7D0760BEC648A
-:10E1A0002B9417343B08C8C7CDD26166045FCCDC22
-:10E1B000CEE4E4B8A25FE81FDEABF4CD6C16D7A4C2
-:10E1C0001AFCD5E8BFD279B4CD46BC701EB66C6FD0
-:10E1D00010F02262128EEBAE0D71DAEF50D4679818
-:10E1E000AFBC5FCB4E793F78F6E13EE36645CF9416
-:10E1F000ADEDE1DED2F0C1F7B2D97EA9FBB9831C47
-:10E20000C487B4BE698113DB637ED0FD1C8B9B3653
-:10E21000D3FA07757A6503CEA7DDC6FC47AA577EF9
-:10E2200008FC7EC2F0E871D82F39318DE07DB377DC
-:10E230009D0F9D44F5ACE07B4260EBC9533A34D16D
-:10E24000F2A96CE6DF9D14FC9B60DD4FBAD977DE46
-:10E25000ED861D78EFA92AF791727A4AE173F79A51
-:10E260001ECE50847940F42755FCD476B7E494FF51
-:10E270003C1BE9308074A85BC3B37C8382CF02C1AE
-:10E28000970F71DA1B0ABC63ABBF6D7C86E25757F0
-:10E29000C4213FEF7FE134F2655D27C77E27A8F3F5
-:10E2A000B4B04A135F757DEF34DA9525FD6CFFA598
-:10E2B000AEFF30FF8003ECCD31E4CF3ACA7FD612F7
-:10E2C000583709E97CD514CA067B19C99FF64AA6B6
-:10E2D0001721E75AC0EE83C3FDDFE05A0BFAFDAA0F
-:10E2E000FEB5652BBF5BE9F0E7827E7D5729ABF079
-:10E2F000C3F1AAD503FC9DFBCEB46370BF5B9D87C1
-:10E30000F3C079E4E1117BC2F4B544D915F4B50A40
-:10E310003F927EAE1C66CFA2D891FF8A6647543BDF
-:10E320009BFBE572FCDD3775FD7885EE23F63D87B6
-:10E33000ED4B597278051FAF0BF2D81295E78E128C
-:10E34000B8DFCF57043FA1D69262F7407EE79F1314
-:10E350005F933668E87552A0F24ECB27F36C880FB6
-:10E36000950B6B8E66FD6A8BD8EF4AEDFFEE72A4BB
-:10E370006B2DAC1DA56BAD7FD326A4B38B888740D6
-:10E38000BFF899FEAA5D730FBB075CB57FCF7348DA
-:10E39000FF5AD981F75A2FE95B8EFC499C564F01F1
-:10E3A000877A0DD7599533DB085DD9FD4334AE6FBD
-:10E3B000827C891AD7C757FBE43869B49C262B7135
-:10E3C000FD0C25AE37CDB27CA871FDE6869F61FCC1
-:10E3D000F388EB27F854E584C68D3A799AA1ACB35B
-:10E3E0003B87D9D3B9394C2E3797F421FF6FBE1C28
-:10E3F00040F97154323DE238AFD77F6A1E8C903DB0
-:10E400008C0FED7D0B611F62C1573811F4402CBC9D
-:10E410003FCA057E01E755C861768EE28EEBBF8C60
-:10E42000D7DE47BA3487F1F7D55E230901BDF980FD
-:10E430003096FF1B0B5E56A862F6BFD3F5FB756FD7
-:10E44000029E0BBAFADCCA4F4259EE49C0732459F6
-:10E45000A12AE48BABCED91EE0036733A3D3D5BE8C
-:10E46000F9C83FEFA44906B82FACA9EFA979F0FB92
-:10E47000D01B15BCDEF9AEB101E8B0E3EBDF9907C4
-:10E48000F74B6E0E72C9F0BDD9D5DEAFFC05EC5E60
-:10E490004DCF163CF7D5FCCD7F42BFDB103CC8DE2C
-:10E4A000F72688D06EE8AB4FCE03FA36F73563FD1A
-:10E4B0003B5F3D88E5635FFF8EF19992301FBFF3AC
-:10E4C000DD833FFE6F28FBE2F1BB9C5AFFFEC7A134
-:10E4D0004CAAE2D97757FE9705EDEF75751D3E8A78
-:10E4E00072A8F2C5923E4EB93F4CC0731E2AFF5E21
-:10E4F0002A2F2A05B9831B768DF368B923AE265AD5
-:10E500001E71A732DF5AE04518770D1704396817D6
-:10E51000E45ED4E7625F36E8737B5148807B5756F0
-:10E52000571F9EC77E76B009EB575AD879B1A954C8
-:10E530005EE01E290AADE706F56B56B63FBC0EE05D
-:10E540001D3012D1981EC6B75E90303EAA5FC179C9
-:10E55000A884118E6C3B9102FB5F0D4439D7C5DA5C
-:10E56000B5D3F0D29284768858E9B3745BF43CE872
-:10E57000BE1C87229F4C5EDDFDCB33417F10A7D9A7
-:10E5800053901B8697752ED001D7F9BB6B0616C228
-:10E590003C16176E980EF37042BE0FEC8BEC40F8F1
-:10E5A00075909FA4F21454E42655F4E17D2316AF30
-:10E5B0002F057E834D32FB703F4F5AEF3335819EDE
-:10E5C000E187B357A1213CA4CB7B7599FCE93300CB
-:10E5D0005EBB629F7A18FEB43FC293E67B9DD09FDC
-:10E5E000C24778966A2F8FBFF16661EBF09F3FBA02
-:10E5F000F3903E5F1E1C05BFC401F6455E83EB260B
-:10E600000938DF77A029D25BBE559BC78ECCF78037
-:10E610003E83FDDE504ED90F7266849F6A1E28929B
-:10E62000CE7F817AD01F92179FA437F9A67E0F5014
-:10E63000D5DBF57B14BBFB838BA877EAFD3CB3BB32
-:10E64000FECB68777FDDE8256F51C7B2EBC58BC87D
-:10E65000DF0F1C6176B7FE48B100FCACDE8B5C5F5F
-:10E660007E15EDAF6C24C8D7F542DF4917C0EF2007
-:10E6700089D4B327F5F3062782FEFBCD8BD635D0A0
-:10E68000FF84C180FC76A2FB9683CD9C163F1607C3
-:10E6900070354194C77AC52F285BBBE94988C7EA22
-:10E6A0006A08C685F5FD8A7CD1780CE85B7FE43486
-:10E6B000F28FEAF7E67E7905F25B22E537FC9D846E
-:10E6C0008A01C48FFE790AE833B182DD8FBBB8B00E
-:10E6D000B814F8EDD8EA1FEF04BB5D5F414480DF5A
-:10E6E00095E57D11EF017E91C37B29BB4C9DE5F043
-:10E6F0009D64D7024904F9A8F7578DD8273C5FEDF0
-:10E70000AFEA47F971AEF380FFD0D1E447BFBA2337
-:10E71000DD8E7E41D78B4D683FEB259B077EBF6426
-:10E72000C9116E2BF6971D84E1CFA19FBF24380736
-:10E73000CF6DA9F458523198CDF405C3FB37A681AB
-:10E74000FB61DEBFF99E19EEFE1EE1BFC48AC00167
-:10E75000B8AF768938CD03F76B26F1037EF077A842
-:10E7600009F634C1FEB0C967F640DCBD97C37DA889
-:10E77000FF076B233BDE0080000000001F8B0800BA
-:10E7800000000000000BDD7D0B7854D5D5E83E730A
-:10E79000CE3C924C26274F1208F14C123040124EBC
-:10E7A00020BC114F88416CA90ECA2354C4E11D201E
-:10E7B000242362C55F6F33381023BFD71BAB156AA4
-:10E7C000A91DF0516A45A38D354AE01F10107BD575
-:10E7D000466B11FDD18E4A798964E451E957AA77D5
-:10E7E000ADB5CF49E64C263C5A7B3FBF1F3FD9EC25
-:10E7F000B3DF6BAFF75E7B4FEA64A6058B192B780E
-:10E8000040D0824EC6EC8AC05826A6163DB5313699
-:10E8100082C19F669ECAFE524F09635F3468ECB3A3
-:10E82000018CFE28598C2DA37F30B67C41C8A640B0
-:10E830007FB5CFF2FE32EC5AD9ED907E837FAE8663
-:10E840007C25BBD503E599A270EB544A2D941AE5BB
-:10E85000465AACCFC3FDF8BC87AA3218FB5E0D53F5
-:10E86000136088BE45F01DF2CCC78203DC90AFF187
-:10E87000E42A589EB15815219F99CE7E88E591D5FE
-:10E8800036B659E8D9AF8AEB1A81F53CE502D4CB0C
-:10E89000EC93AC067028B1C29280EDCA0475B382C5
-:10E8A000F91B9F64E590CFCC51B11FC6823A1C3C46
-:10E8B000E516A877342B595D87DF837F906E047847
-:10E8C0008C5764A3BC0CDB292EC6D69575B7AB2A32
-:10E8D000F0507F557D12D400CC734AB3BF94E573DA
-:10E8E00038789CDD7008AE4EAC0E46C16324C20180
-:10E8F000DA0707B1EA966284BFA716FBC9B2A8E996
-:10E90000EB5221EFF497DE948CE304085E57E03C71
-:10E9100020AD82F5F9B0DF02CF4A824766B21A0F06
-:10E920001EA12B383C76CD7C4EDC00F5EA8A85A012
-:10E930001DE6F7C8B6A965B8CEBA694E9541BECEF8
-:10E940002BCDC37199DFC19E823CF32E78A80AF2C9
-:10E9500075351E759D42EB5E80E5B91909EA3A28C6
-:10E960007FF41541C37C9DDF194C80FCF7DB383EFA
-:10E97000D4B5BD20CD873409F1CE89EDFCA5534B2C
-:10E98000BAE7C3D86A9A4FDDC41379BBA1BD5F64EF
-:10E99000AA3801F2B6F04015D65F37213C10E17578
-:10E9A000F295846A6CBFC762F1E3387B360FD914E5
-:10E9B000107AF673D2EA69C5F59F84F5FBA1FCF5E0
-:10E9C00057DE0FDE0DF935800A6236ECD16AA502FA
-:10E9D000CBD7553119F7C5D8AFBD367F11E2D5DE9B
-:10E9E000FC44C20F9CA707E07C1CFF99C358FD158F
-:10E9F0009E250ACED3126A94B0DD9674C6C640FE38
-:10EA0000D5FB077A9D3DE10CED695F1C1223FC7577
-:10EA10000493828128BC7238184B1E46A9DF09690D
-:10EA2000D22A0E9FD87EEE519C547FB923BC177614
-:10EA30008ED5AF6A7664011E2D4854E87B82D5A737
-:10EA4000F583F9D8DA2A42FDA03C2B0DFEC27DDB0E
-:10EA50009C14C47DCBCA62DE17E3F45BA7D39BB1E1
-:10EA60002FCD698CF032CBC5EBFF4CA79B07F47A16
-:10EA70009BF5348A2ECC78EFF4BA914F6425326F2F
-:10EA80004B9CF18CF6303F2A37E6C51CD04F06B6BA
-:10EA9000532C84DF317417CC2C1986745795A8EE4B
-:10EAA00072203D0D730F0BB0EE710031DD53937B7F
-:10EAB000E201AE03E907D78574D65BBDE69D9C3FB6
-:10EAC000C5E2E5B33A9D2C425C87793F27003DC6FD
-:10EAD000DD67DE4F93C56D7914E6FB9FFBC5E066ED
-:10EAE00077CF7A46FA6003D0A09DB1FC8DB3523C3B
-:10EAF00025BDD7DB89F5AE84711B1C54DFA92AAB79
-:10EB000025E87FA2C35D26321C4F9988E3F9613C5A
-:10EB1000DCE7E409EC4B11E053DAD65C74AF1BF18F
-:10EB2000BCA51AD7355192A532E40B1E0B0B1571FB
-:10EB3000FEFD0DFCDFA73A91851CDDF91C6F9A29BB
-:10EB4000DFAFA6AFA97E7F5FBEA9FC8A55834DE5E6
-:10EB50006EFF3053BEA069ACA9FE80E689A6FC9585
-:10EB60001BBE67AA3F2878A3293F64CB0F4DF54B06
-:10EB70005AE699CA53BE2ED8F533C4735C7F1C3E47
-:10EB800067A4C71537EDCF444934F537B4CDBC7E03
-:10EB900089852D48EF29138E0E8B47CF465ACAA47C
-:10EBA0003361A31DF20187627914E6E17A5F0CAE4E
-:10EBB0008BB3EF063E1BF994D1E67D30F8C4C5F067
-:10EBC0002BDF7B617C31F0AAB7F294AFC5B87499A2
-:10EBD000E8E67429310FE3EBAF562FB47E6BECFA05
-:10EBE000994278FFAFAE3FDF3BA82D0CFD9CAD16E0
-:10EBF00048BEBC8745637AF6F751CC3A67AC4C21E6
-:10EC00007D86796E8A5BBF7B1EF7D23C6EB1335F27
-:10EC10003C384C7273B93BCFCDE9FD62F4F9893EC3
-:10EC20008F3F1BF4B9C64DF4C8DE138303A0AB7944
-:10EC30004DC2CE3E8017695EA72AAA909742AC2C9F
-:10EC40004ACE3FA2D3F7A3D81ED20D0D32F5F3580A
-:10EC50004336A51B1B14FAFE784311A5C10695BEC9
-:10EC60006F6E184DE993A08F61FA74C3644AB7348C
-:10EC700078A8DE330DD5943EDBE0A5EFC6FEDCA21E
-:10EC8000EF0FF3A4933C8B5DCF9C9566FA30F6852D
-:10EC900089C5D47E0ED0997801BED6A3BD383BE598
-:10ECA0004278B4EAA0FBF9DD517830DD9D9C7178A3
-:10ECB00008FC63141BF58D78F1F65F3528CFEFB6AD
-:10ECC0005E9C2E0C7C61E73F1B10AFDE2D49503659
-:10ECD00016F893FB97CD7E67EFF0E9C6A3187CF595
-:10ECE00000BEC2D75294ED39581EEE1B3DCE9FF4A4
-:10ECF0007D36F2D3A6717C8DEDF7419D0EA7237E64
-:10ED000042F98C187AFD422FFFC2CDF5F4FDBDF01B
-:10ED10008B46B745979F7CDFA7033EA2FCBC3769B3
-:10ED2000CE55DE38E3FEDDAD98E873C634F33EEE33
-:10ED3000B772FEB6FF4F6270759CFDBF587B633D96
-:10ED4000B1EDFEA0AFE773C4C911FF73E86DFFAC6E
-:10ED500064D2E7F75BBDFD33A3F667FFACA4EA78A6
-:10ED6000FB7EC66DE57456243394EF2C8D69A8079D
-:10ED7000C192FC36D4E558A17C18E9048C21A48BFF
-:10ED8000DEF15262870D7A12119E09A48F9F9D9623
-:10ED90004CFBCFBCB2C6A2FA67924C7AE9733F0033
-:10EDA0005D01C793603CD043996AE9DEBF7CFC3BC0
-:10EDB000B19B5F8BBDD3DBC5F0C0E02333908F5C8C
-:10EDC000405EF76C77797CE4E37F131F31E8989D10
-:10EDD0009F3FC093DCB37C3AF291BE8C3DECDE4F9A
-:10EDE0007CE49F869341B7EF73BA8DE527BDB66B80
-:10EDF000CBB888FCD3F9B9E46B0A035EDC2926376B
-:10EE0000AF8326F749BE5F62DEEF97D85390DA579B
-:10EE10009DEE7B6838755B2451BDC164DFD925DF69
-:10EE2000AFC2640FDA65ACB73EE9C7CF637E157039
-:10EE30004C3BA45F25E40519D80243F2397F121D2B
-:10EE4000E7FA1E8A9A9F5566FDA2F3652147BF43E4
-:10EE500051FB367C9F6CCA8FE8C836D51F75403190
-:10EE6000958F091799CAC71D554DF9AB22A34DF5CA
-:10EE7000AF3EA799F215EC3A53FD4AC75453BE4A28
-:10EE80009E65AA7F6DF65C53F975CA1253F9D84294
-:10EE90004F493EEA0F36679390C2D812B7569A0F81
-:10EEA00070484CACF3CD453B69B54B6613B076303A
-:10EEB00088706BB439E475C0A73E15B43C0678FA87
-:10EEC000B005ACEE02A82F8619A6072D6A19A6F97F
-:10EED000DA162FD269E9A04405F1217120631D28BB
-:10EEE000A7243581013FB12585DF2D44BADE06FB1D
-:10EEF00007A8559A0A8A3EDA013F480BA2FD9B9368
-:10EF0000E8ADC479ADB334BB56E33E5B98E729ACBA
-:10EF1000CFD4FB47437AF87A8B05F7B7B5C3F9C06E
-:10EF200058C80F85EE19A59FFDE4FBB8DF1DA28A26
-:10EF30006E9F87A7BC3809BFAFBC8E896259EF7836
-:10EF4000F6F98FB83D15FB7D7D3ED7AF322BB99DCD
-:10EF5000195B7E875EFEB92D7EF9C27C2E2F2AEFCB
-:10EF60009BB21ED767EDB032F45BACCCD4FAB00BD9
-:10EF7000E9ABE70A587078545EF230D989DF07D2DE
-:10EF8000F7CAFB66B3B093F7837EAC95095A1FF4BA
-:10EF90003B7C3E31FE3C96EBF3B49E4BEAA55F17FB
-:10EFA0007DFF3CFFC2EBB49E4B60C1F478ED9DF455
-:10EFB0003D3310BF7DA301A7B4F8E5F7EA70B29E18
-:10EFC000CB61FEF4E8769CEF748F934BE5D673A982
-:10EFD000CC1F771D19F49D656BD988373B81CE9185
-:10EFE0005F54A466D91890F81C16D9A301FCA7A2F7
-:10EFF000490078CA1C6A19F22926592361832E40D8
-:10F000007ECC65D2A7682F580019BF81A9DDBACA86
-:10F01000FA69388A8EA66AE63CC3FA51F2E630F6FF
-:10F020000DF34E1C5C9482F87E8A2929721CFC32F6
-:10F03000D2D90ED12345ADE7602F7AD2EF75381DB6
-:10F04000CC890FC7DFE6733D6AE46C16575FFB7D22
-:10F05000BE8BEB81456A9F0BC90D84AF373DBADF8C
-:10F06000D87DC8A0F24B8533E005C9F5C80F9C4197
-:10F07000F2537EEBF036F0A79F092F0E1728FC7B8A
-:10F08000D7BCF3A83C2FD7F3663EC9156520CAC587
-:10F09000569D7E5B252D699813F918AB8907FF8C67
-:10F0A000025D4F8D59772BD3B2E7A25F43B2AA4FCF
-:10F0B00031E487CCF7421CF8C7AEDBA1CF1BDA578F
-:10F0C00087B03D73A99CCF318F230BF47CFC172CA8
-:10F0D000A1C2FF8E15FB9FED73A9EB40053AA9CBAA
-:10F0E000ABB92C6C453EDC037ECE0C2BFA6D63E194
-:10F0F000E861CA1CA1E0E2F0B438E4ACADB0BE39BE
-:10F100007E1743FFCCADB399AB04E6E1FD41DADBFA
-:10F110001AD49977FDE0D235980E19DF2852AB6BDF
-:10F1200048DF13FCFDC46F865CBABED7E8F2162137
-:10F130005D1C129445B47E01D68F72A6EFF18173E7
-:10F14000A3E0B7B87FC5DE02F47B5999968E7EE2C4
-:10F15000ED76F257B10D8CF4CFFA1D8336A19CE900
-:10F160002CF0EEC67AA3AED1FDB65A64E08DC997F5
-:10F170000F27F86345FAB8189CCEE7733A3FE88A40
-:10F180008F2FE5057C9F2E954E320A381C22008772
-:10F19000CDE5DF3E9D00FC4C7C63B78E7F466AC0A8
-:10F1A0006DD464B35F77B7BE8EDD059C7F7416782F
-:10F1B00008CE9DFDBF3C9C8072DF06EB8F83EFD7AE
-:10F1C0005DE6FA7BA3936F8B1F1F4C8C3FCF39DF1B
-:10F1D0009179BE6ECCB334FE3C6FBFCC79C2FE2CAD
-:10F1E00072147CFBF3EC2CD05E2F403994167F9E7A
-:10F1F0003FB9CC7902935B14827A3380FF61BD6F93
-:10F200007BBECC3FB70AE5CF4D5EEEF72F014E8BAC
-:10F210007C08A6F2E437C351AF55D76E40BEB3C2E7
-:10F22000A5FA65E223AF237E031F641ACC67DA6474
-:10F2300081FC489D23BE5C2421BE67B1502AF2ABFD
-:10F240001D76F263C7AEFF67BA9C003AF925C28902
-:10F250004D890C447E7270607C3EF1CBD8FA4D1122
-:10F26000924BEB2AE2EBA5BFD2E975B9A37972966E
-:10F2700025FA5C0516282297F569FD50CE96CB6BD2
-:10F28000909FD8401E215C6DFD06F7C1FD80BC47F4
-:10F2900080B422FBCD03828BE07DA20B7EF9DDE3FF
-:10F2A0001C6FD827175A7BE7E7CBC41747FAE2ACA5
-:10F2B000E7578AF7D582287B71D99637E4C268BFB1
-:10F2C000380B5B18098E08F9AFBBFC057DD865F9D2
-:10F2D0000B0622AE64A27CF0907C40B9817673E389
-:10F2E000AB63CA707341EF6022F2D3E4449217819A
-:10F2F000BE638B9428781EECD21BC45EF4499BE954
-:10F30000FB470D0E3025BBF3B71C7DAF0AF5F8396E
-:10F310002CBC16EBCF599984478F5DEBECEAEF9C40
-:10F3200060D26BBBFB97E87B85C31912C188A970BB
-:10F33000FE3EEE7EFC4AD13EC1F5FDB8BFF629A6E1
-:10F34000B1F0F3DF373E95FC0708BFAB7BEE7B6F78
-:10F35000FB7C5AD14E607FADFD65C39FA3D2395C63
-:10F36000A2712E2CC9871DDDF0BED47D7910FF015E
-:10F37000767D52A1760EFBD758AD0FE733DBA0EFB9
-:10F3800018FD868D4E233F64A3AB63EDCE283ABCB7
-:10F39000D512C9E4723BBC169D4B7FDE9E40FCA398
-:10F3A00073FBEBFDBD748E66E81D49E23749973E5D
-:10F3B0003FC3AF604D8CAF471BE717BBACC585A4FF
-:10F3C00097E0F9EE68C80BCA02B4272599A90198FD
-:10F3D0006FC5B5804DD0DF4431B73D0CEB38CB4E17
-:10F3E000A45D85E0D3FDAA2BDF199180F39C2859F9
-:10F3F0008F47F3A758FF4F5EA1D9FF738ACD4E09FF
-:10F40000215C8AB87FA4F4956B52D00FFAF09489EE
-:10F410007D30DDD9D0244BD66E3F50ECFC2B7AB139
-:10F42000478714727CEF48D48614C2FA2A7A59BFEF
-:10F43000AAD73B94A8A98599DDFD61FD7871106F6D
-:10F440005CA9F37B1DAE37F9E792BE6571005F459D
-:10F45000FE097AAB28A37FB0D04AF4AE3145CE2264
-:10F460007F21DF7FE0EB12E4AFD2F342D307016CE0
-:10F47000B7F176179D7F33AFC2503E0060E83CA0E5
-:10F4800051F091BFC181F11E90AE13D40D22A4A200
-:10F490002592CEE922C8E3199857C2FCEB42388086
-:10F4A000F1016B1C3FFE25FABFB580C41226405EF9
-:10F4B00062E45FF41F4CA6F3389A19CCC36ECC4BB0
-:10F4C000CF27EBF9CEE993260F80F4CEC4C75D8831
-:10F4D000A76101F828F4F355E28F434437BE44D5C1
-:10F4E000DA17FD4A1F535E5891A80AD9E8777215BA
-:10F4F000A19EBA8A25AA7618477396F8715C9BC2BA
-:10F50000C80F9FC85A681D4EE7177E048ACC640155
-:10F51000F33989DEF98564A7303A1F3FFC71F26642
-:10F520005C7F827C2A74377C4A671AD54B8F918F17
-:10F5300099CE9502C56D78A418B9E81510FE7DAA7C
-:10F5400063BF9BE5A5831D94111F859027FB1BE0DE
-:10F550004F1D08B7F26EB87548DC9E33E0E69FE8B1
-:10F56000FB15C2D57FAF5D0E64F4EE6703008D42DC
-:10F570007DBC435EB415EB83C1C42CD85F365F9F5E
-:10F58000BFC6CEF741F26EC5F61F5AB365B4770C0D
-:10F590003C6B1EA8FB217AF1733C58C8F1B02EEDEC
-:10F5A000701DCA3906835AF2C05E4A3E3A12F90605
-:10F5B000C8CB26949709568DE06DC8CDE5ADB7311F
-:10F5C000A4ABBAB6B90CE9F543C13B6037D9238C7B
-:10F5D000ECB19993FD7B2C0AFAB0A6AD75427AB8CE
-:10F5E000309F9F67EC99B487D890E82CC176655717
-:10F5F0007BAA3261DC400953EF857A8104EFD6970C
-:10F60000705DEF882AFAB9EA5755B2CF86EBC80485
-:10F61000DF37CD48277F694665A411E30422F7331D
-:10F6200019E37A7AD0C77958DF48C69EA0B1A09F67
-:10F63000057208F12707F04D90BBCB9FC4F2029EE4
-:10F64000BF1AF2F57C4B59417BC50D23B85F8CA1E5
-:10F650005FACBE5D207F5BC1B4E1A4D71462794684
-:10F660007479EAB267215F587D958AE4A458BCBFDB
-:10F67000B803CBDF66B40EA6F3EF5131F43BAE9B7B
-:10F680006EA8BCAC2BEFABC4F9EEB98D91FD5AAFAF
-:10F69000CB5B13BDE162A14C1B89F8D7D50FC37EAC
-:10F6A0002AF5FC3849A67E727D4CE70B9E8D3FA55E
-:10F6B000F3018B8A7EC946A199E0C3FC3ED2F730A4
-:10F6C0005E06E9256FF6CE5D561C2C83D39DBA8F5E
-:10F6D000D35D39F38808AF91F2FD011C7FE66C37EA
-:10F6E000F199314719C185280FF257A50AB44FB9CE
-:10F6F000030A68DFC73BD42611F04814CB0A126016
-:10F70000BCEAD9029D4B4CAF760405F8E774A00F14
-:10F710008A8392BCEE1980EF33BD023FEF85FCEC8B
-:10F72000283F3C68C3745E36C3CE7C2FC4C1E7DC7F
-:10F73000019C0F1BEDEBD7D84C7E9DEC014E2AFFB0
-:10F74000BA70D261E2138CC7B3E4247A8E217F674A
-:10F750005233F1A9C316D0BF51FF651AE9DB37E96F
-:10F76000F46EF08BE9DAED64074FF798F5E80F7166
-:10F770004F900E6609A4E7CEACBEB09E7DAE50D0D1
-:10F78000CFF172E5C349DDDF15A6903D7D23EA394F
-:10F79000A5F07132E82151FAFDEC3BCFA752FD3EB6
-:10F7A0004F2FFFE60A40851ACE5FEA019EC82F2B35
-:10F7B0006649442F756B6C14F755DFB6DA9A85F8F5
-:10F7C0007C0F5339BE7ED2D80FE6D9AF561B212A03
-:10F7D000DDF0E9571B1490AEB390E710FC2336F42C
-:10F7E000C7CDB0A9B5B8AE19694CF6A7025ECEBABE
-:10F7F0006E23F6BFC6C16411E46DDFF677828857C9
-:10F80000C0CA55C449C01C8A67CB9593E85CA1C99E
-:10F81000328CE2B59A5CC96A747CD4BAD5DD78873B
-:10F82000715A8A9D0D93F5FD8D6727150CE0FCEA52
-:10F83000518191BCF0CF72109C330B789C52668A38
-:10F840006A0BA422BFE17CEA5181C7D73D6AF5E685
-:10F850000CC7383C502BF9FEF076B1749F99AEF787
-:10F8600093A4080120C669ED65E516849B3359C54C
-:10F87000B844A3DFCA44CD8A7CAB72B0302240F0DA
-:10F88000DC242D40FD34C1CCF7AD56BE2FEC23CE89
-:10F89000F763E520C801E2FBE8AF0F9493FC1A3F41
-:10F8A0006004C903EA6795E490ED2AEB21CF323C6E
-:10F8B0002C19FD5BC30064A8AF77647BA662DC9E55
-:10F8C000FF4D89FC69E5D5EACD0BA3F6F5E7037595
-:10F8D000BD7D62640EC541DDA3F6C338A83515DDD4
-:10F8E000798C77AC61CD36C4F79A18F9B8D4B99B46
-:10F8F000F4C8A54F5ABBF197617CA85A80FCA3F6C7
-:10F90000D91EFE20E253DDFC2CC6BE64F26BB89E0D
-:10F9100011C08F910F6985C922F995D96C2E47D9ED
-:10F92000D302FAC544D7AA26947B9D4272B358DE0F
-:10F93000CD2747E8FB759FE479ED6E5C37E84B4FC8
-:10F94000C9ACA71C603ED25F2680DC443D5A689F4C
-:10F9500029E2B81B1743DF788E2F852B317FE762B2
-:10F960007E3ECAFCB7D1F9D738BF5D46FAFF2A31CF
-:10F970006F8D3EAECF0ACCFA987C0FF5C7605F5012
-:10F980006F11901F4279DFC9D014E8605CFB11EA67
-:10F990006F633AA78B583D66B7C519B45890EFFA14
-:10F9A00049EE24B06036C24F2BE47CB6FC00E7B3CE
-:10F9B0002FFB4183165195F5DD34C54D7A20958F87
-:10F9C0008D308A9BD9CEBC75BABEE31F908951A2F7
-:10F9D0003ECEC7757DC1D0E3AA62F6F15AE7231285
-:10F9E000F2AD6BB37BEC9788FD4F6602E98BD729AC
-:10F9F00017E65B9AC19798992FB9D979DA3F76FFC4
-:10FA0000DE3BD04F1088D1830297A907A5BBBD1B51
-:10FA1000911E62F5A1DEE2289FD2F9FBA5C65182B4
-:10FA2000063107E5D758C3CE8AC19FBABDC7E73CA8
-:10FA3000C0BAF1AE0B9FFD9B6EC675803C97D1EEB0
-:10FA400013FE6B3DD1F51AA8278E47681E0CFC1CCF
-:10FA5000F2210BF3619C02F3CAA7114F0DB90B9C65
-:10FA600088F0A47121C7BB5112CFE782228B78198D
-:10FA7000181DABAF7BDDE887D6CA4B282ED690C7C2
-:10FA8000C32D1AE1C908A6A6633D034F46867939FE
-:10FA9000E0C76EC48F7193015FF231BE76543FD4DC
-:10FAA000BB2A9842F8511123D72A9DD324A4F34AA4
-:10FAB00047ECFE6B16ECF71A1D3FAAE47F0E3FAE33
-:10FAC00040FC30E416E8C9F7C5D817F7C5D8179732
-:10FAD000801F615CDFA5E2C7B101971767DB69BDD5
-:10FAE000E7637F39D9B33E31AF277E08ED772E7AB1
-:10FAF00000E93D90CC70DF5F48902B9D30CFFA1A23
-:10FB00001E6F3EFCADC200E6B396BB492F7C21556B
-:10FB10007D8DCA7DBCBCBC431393215FB012CA214A
-:10FB2000FF82DB5389F9FA55500EF547BCE70D60AB
-:10FB3000BEF01E5E5E76AFEFB56494F37EDEFED55A
-:10FB4000638DA20BCA838D7AFB8AE64ACCD737F144
-:10FB5000F6230F0403981FF4001FDFD03BAFD6F944
-:10FB6000E70BC2A9D7EEC2FE807F6E06FE39EE8497
-:10FB700056F61CE417C8160BE2EDC288DF8AF8704F
-:10FB8000D8523B12F187CDF366239ED9D16E15BBB7
-:10FB9000F997059D3AD06E826425BDEF0DC12761AE
-:10FBA000BDC94812286747AB0EE4EF1887BC19E4BB
-:10FBB000CD005D1E1971BB787F606AD47E0D18C8B8
-:10FBC000E5BC512F2B8DE3057B8CE38511571C5A27
-:10FBD000CF04F4B7E0DAC80FD123CED847F23BD830
-:10FBE000BF6418E2EDB5185F0CE5D78EE5F1C56589
-:10FBF000DF9C9E14CF2E2AD6C73DAADF8730BED702
-:10FC000004DD16A49F171079FA62FFFDFF88FAD26F
-:10FC10000B38D65802A99F8DC67DE4F9B103731E37
-:10FC20006E02BC586CF14988472C4F5071FED77753
-:10FC3000F8AEA1F5D43276434E9C75E8F27E51C001
-:10FC4000B699C78770FE335DDFB763F2EC3D7791FD
-:10FC5000FDEC52AD30CEC4F10388EEA7550B06DDA6
-:10FC6000570E443D184F30C89FEDA538F7252C6836
-:10FC7000C34196C4D0FD32E7998F512E2DDB62A689
-:10FC8000EBE52C64E3FEE6C8E31F40FF351B9265FD
-:10FC9000943FCB5BCCF56A36BC754028EDC9076A4A
-:10FCA0000C3E1034F3015038381F583F98CEBF56E1
-:10FCB000648BCAA174F47FF848DE27302EEFEF93EF
-:10FCC000D430D15FBB9DDB51BA7E7EA7C8F5F3046B
-:10FCD000E6509C45C8872D7A9C2ACF1BE3B398F841
-:10FCE0009653CDB711BF31E260008024EF4FF9AFDA
-:10FCF00095A3FD6C5D7C3E86DECBDAFB84F09E81B5
-:10FD0000E16701FD80EC2BB60038DD38E243B46FCB
-:10FD1000C252F87F0CAECB46EB5A9F9447FC7D1540
-:10FD20001084BD0CED62A924847D0EE6F4E4403A13
-:10FD300042FE3ED96C6F2530AEC70FEFE07E9C11BE
-:10FD4000DD72BF01F7D7CE540797FBCD0CE9AB5757
-:10FD50007BC5B932AEBD42120AFA9F3199F3F58BD9
-:10FD6000D92BBDD9235DFB99007A1BA4D3BC09CF45
-:10FD7000E3BAAF3E9F921C2F8E6A5A85E841BB6C56
-:10FD80009A55CB4C8B1727897A7666547DAF93FAB8
-:10FD900093BCE9CF63DC12F41B42FEDFF1A62D6EAB
-:10FDA0003CB2A4F72F5935395EFFD7A2532ACADFD8
-:10FDB0002E79B3A8DF6F415F7971601C7DC5B62BCA
-:10FDC000E69C92F90746C7133CA3FB0347166A6DEE
-:10FDD000D8FE60421EF13BA50CECA97E94A7FE0E56
-:10FDE000DE762DC5479C61DA45E323D644F9CF0F73
-:10FDF000A6C63F17795DE773368C7983716F57B468
-:10FE00007D8857476DFCDCE568A29EBAF8B9D51F1E
-:10FE1000BBEAF3F498C1272DBCFC689AF9BCC6A8CC
-:10FE2000F7B9EE873AD4E0F0AC89F2BF2AEBED3EA9
-:10FE300094D39905FAFD8D958CECE7CE5752374552
-:10FE4000EFEBD98115B62B33B19E66CB4138BEC2DC
-:10FE5000E55F9D14B6E1FE3E7285F7139C779DC267
-:10FE6000B417B11F256CBBA904ED061E17D269E5B6
-:10FE7000766067024F8D799D1D38D576259E23DDEE
-:10FE80001626BED8959F1A26BE7776A087C6ED9C0B
-:10FE90006E94EBF9FFCDF30A93559C6F8543B71F22
-:10FEA0008AE435E47705BD0FFD36B1E7078C8DE7B1
-:10FEB000FAB11EE7A9E5FE83CEF17AF3F35B1C1DD0
-:10FEC0007B7E0EDFE7E8FE606FDB977BEE56087FF8
-:10FED0000EE3B87383098CE2BDFF45BF7E67FF0E5A
-:10FEE0005ACFBA8A48DE63E5142F407EB5E5EDAF00
-:10FEF000135F5F6ED07DAB99EED3AEBCB473B5D853
-:10FF0000F3966F81CEAEB8320E9DFD0EE535E0570B
-:10FF1000953885F8DAA95681FC210AEB684438AF98
-:10FF200010F8BEAC78637EA50DF30B994C7CBE3502
-:10FF3000969F7903A8272C6B6224EFCA58410AC206
-:10FF4000BB7E9F883E04BA67A344F149BC67A344C3
-:10FF5000D9C578CF263A8FF76CA2EBE33D9BE872C8
-:10FF6000BC67135D8EF76CA2F378CF26BA3EDEB382
-:10FF700089CEE33D9BE8FA78CF263A8FF76CA2EB67
-:10FF80001F61BE47C70B08D7091B10AEADABED32E2
-:10FF9000C295F9B5778BB3489C11FEE17D9CE87E54
-:10FFA00096B926D996031CF6668B4C188DF76B967E
-:10FFB0009AFA5D26D6929F00D40E92233EF88FE0E7
-:10FFC0002916939D7CB64D80BD037D68438CFED081
-:10FFD000FE5023EADB4B82E6EFCB5894DFDDDDF306
-:10FFE0001CE8D62BF573A0BEAC2FE27395E85471D4
-:10FFF0009F4FBD27AA76A6BB00709FB7727F64197A
-:020000021000EC
-:10000000BB72FD78DA472B0B2A783CC2CB4F6D14BC
-:10001000837E77F7F9D0A97DBF3DEC857A8B734459
-:1000200019E9CE9E6DDEEF04C5BCDF4945E6FD4E05
-:1000300056CDFB9D32DABCDFB1704ED5CCFBCFC4C0
-:100040002904E765FDC0BC83F1D3279BF1C180EF94
-:1000500068F88FE3AB42F05D04F07D4CC073B507E8
-:10006000F6F6537AC2B9AEED211BEAAF970BE7075C
-:1000700010CE49DD703ECBC6573A09B86C9A63641E
-:10008000B7BE54BECF474102C7E4DC4AFD3E2F3F16
-:10009000DFD1E10AFA0BD90B51E7504DA248FACC57
-:1000A00063C857B58C64E203EA8624DAAF610EDEDA
-:1000B000DF42E625FEB43046AF59EC7CC4867A4D6B
-:1000C000EC3A7136E877A969E77A4DEC7A7BF8A3C8
-:1000D0008AE4503FCEB75B1E537199ED069FF6A29E
-:1000E0001F238375D8508FE98D0F7E2F5B7B1EF900
-:1000F00011703186F0E0A600FD89AB4FD6771573FD
-:10010000FFBCDDC7FDFCCC9F4AF318C5F83CA851E5
-:1001100094BF7F941424BF432EE3FE25C31E8B851A
-:1001200027CB15D6BC0BFD8AAF311D8EAA2858BA35
-:10013000FDF760056AA85F8F3CC3F5A7D18E968056
-:10014000A4F4B4CF0F17E8E7DC921EF77991734857
-:100150009C3FFA396ED2E3EEAE6A1FB507F35DE756
-:10016000923BDEE887FB357EC75BE998BE2B284FC4
-:10017000DD0DE3DF2870BC88B52B03DBC729B8FF92
-:10018000570B1EF2574C62BE5C6E8F0449CE4C700A
-:100190007849AFB538342B9D47E9FE4BC6C2935022
-:1001A0004F5FAADA681E6BE44F27A13F6619D3FDA3
-:1001B000316DE6FDEB610FC5D841B5B0FFD86FAC2E
-:1001C000DD13078F62E201CCF2FE87453A3C198FBE
-:1001D000575118BFF75DA3FB916A1C1B5DFC1C0EF9
-:1001E000E45C2EEB61374908F831745EF135E25B6F
-:1001F000561AD80374DEAFD8E2C5EB313983CED5B9
-:10020000E73BA7115F9EDFD4C3AF4378BDB0F922AF
-:10021000EBD2F58411F80DC6FDF3950AF7A3244E31
-:10022000D9A7617179475EB43E5B6FE3F772992F8E
-:10023000DD745F21BF88EBB9E5BADE54E3D0E15449
-:10024000E46F44FDB84B6FEA612FFE73F7638C785F
-:100250001780D78022FD7C677546F7F98EB18E2F07
-:1002600046743C1D027889C9D738903F2EEEEF1DA9
-:100270005204EDFA1F081F46BA614E85F4F5936DDE
-:10028000C7F68BF9DDEB023C7B741CAEA34D94F9F1
-:100290007D797FE338E8B7B38CE35DEFF6AFDF98A5
-:1002A000D7E878F332E2EBABC4E2947094DEEED49C
-:1002B000E17774B06702B62BFF63AE0BE76BCD6FCF
-:1002C000D9DB17F5E23BB85E0CFB4A7E10D1CA04BD
-:1002D000D44BABC4F3B763FE543693D1FECC48F293
-:1002E0008B2ED4F3E632F21331D5A722AA88FD8BE8
-:1002F000C94ECEBA03EC27E8F7A395F353F15E7F1E
-:1003000056F282D40227C637C15407405EB078F84F
-:10031000BDEC173FFE8F722C9F4D7EE95BECFC9C81
-:10032000D9FDA3BF2F233A604A9A7D0C8EE7A577AB
-:100330000522A922CDAF62D699E1A85FF53DEF1C59
-:1003400086FA590E9EF302488B74FAB8BA3232DC40
-:10035000E7EC865346417CFB254587C7C1C49333F0
-:10036000F03CC4B87FB13EE96D3A0F3FA99F9FE4CE
-:100370006B935310CF0F0E34CEB54299E8B2AA4B0F
-:10038000D05266E23CDF11199E9B9C91B594542893
-:100390003FC9F8FD0A7F8795CE8956DE5FD927CD04
-:1003A000D97BBCFE7F1471FBA636262EAA560AD92D
-:1003B000F03CABF65F8C8B6A058B3BDE7998B1FE27
-:1003C000BA54894943211598E742F5B67D2DC68573
-:1003D000E3A622CB05EF6D6CD0D767DCCBA8C37B3F
-:1003E00019F069E52B157DD805ECD0BA73E34CF70D
-:1003F0001FD05EC3F5D59D9B40DF2BEF3B6143FCD7
-:10040000C67EF00904E35E466F704E29E2F6461D93
-:10041000DE67488FFEAEF0EF5DFD6750F9333ADCE2
-:100420009ED96799BC39CE3CF7E870199C2991BFD9
-:10043000604888699BE28C6BD433DE35E86D5EAD35
-:1004400013C37370DE18171C6FBC97F57AC67C5BFC
-:10045000D3C28B3CFC9C7520BE5BD095972379372B
-:1004600046F1D3B3BA7FA0F57BE13C7A27E33A6E3D
-:10047000C7F6B6CF53FB7B93903F8C944277ECC981
-:1004800020B38BA11FADCFEC9005E5A44157BDED86
-:1004900077379C45D3FD979E70B65179D7BD33A66B
-:1004A000B9842C94438CF481F57F2CB5D960FC631E
-:1004B000161641BE5325E64E7A15F3603F205D1EA9
-:1004C00023D901E90691EE311D7BB2C08676D9A20F
-:1004D0000A1611816F1D7B37AF11E32E95B9A04924
-:1004E0008E0375678DF9FCB186697B93A1DDFC03F2
-:1004F0009E9410E4173C609663C7DE7DD086F6803C
-:1005000030CFE9C3B82298E7A45721BFB0CD46F752
-:10051000B2163D12DB9F590FCED2E56DAC3E7CB2D8
-:1005200048B73B46B29128675E6D68E3EFE6E8F7AF
-:100530001041FFD3E2E189A1073F9938F1AF4504AB
-:10054000AF1611F9D238297EFD5B8B39DDAD78EA23
-:10055000B4CDA5F44E67C7819F14C2F8271A644A28
-:100560005D83346110F49F37C86B1B04ED45259201
-:10057000F705F939F93928E01BE5EBF17E1ACADBFA
-:100580006AAE27D8C5DB6A481FEDC7E400E92F3EF5
-:100590001FF9D32DA09FA462FCC6EDA28BFC0DFC1D
-:1005A000DDA0317F59908AEBCDF8CDCC1710AE7815
-:1005B000C781E1FB2B155A19F2F775539D74DEBF05
-:1005C000C9E2A77E3050EB3E8067F09931BBD07D09
-:1005D0005ED8F2D044B4FBE4F69D21B4579A2C5F68
-:1005E000EEC5B884A6094C0D10B483344E7DFBD4FF
-:1005F00017B07DDE34A78AF74AD7B9B53239AA7F5A
-:1006000085453E463DF364AD85FCA6A7DA9EA0F382
-:100610002AB0EF22A87C9FAACD27BF9911F7436784
-:100620007F71FC862740BEB1A87BDCCB5B3759507D
-:100630001F1F821B15155765CCABF6DE50D6CD2893
-:10064000777F2D911CCDF8AFEB287EC02D2902C2FB
-:10065000F36641E6FAA8AE27CF62C69FE63DA89FA3
-:10066000CE433D19F0F0332148F19A16D6FE12B66A
-:10067000AFCEE6FA20535A46A0FF3A5CABBF4BB46C
-:10068000CC9A8AFA8D714ED01B3EF4E6E7819E1615
-:100690007D08E39E1418F99BEA2D913C9CDF716B59
-:1006A0007CF93A7D10C7BFBA81BE20C9F334263F1A
-:1006B00085F32AF4BA912EEB2CCA0AF27BBDE7A18E
-:1006C000F8904E414E33BDEF2237FF0EF5EE7A8B98
-:1006D000CCED9B035A199EC7744E2DA6F75E4E5A59
-:1006E000C379C44780EF615C56DDA017A649F8DEE8
-:1006F0004E5FD0BB20FFF3413B783E3FBCC802F9C0
-:100700005DBF7E7F9A0470AD1B1C3E8CF937077D60
-:10071000CAF3C3C28B707F8E0C8AF03C1A60806073
-:1007200067067D35CD0FEB3AAEFB3F991A9E83F3FA
-:10073000AC7BF54A4BB47F313C88F3CDE309BCDE9A
-:100740007137BBF546D43F8AC2741FC6A8B77B90E9
-:1007500011B7C9F17FC9B68410C6091BED5876FCE4
-:10076000FEEFD1DB2DD1DFC902FAFB2DD6DB9DAD2B
-:10077000A4D13E1F051E85707965109DF7CC1B9492
-:10078000A6BF7314CE4B2BEE39DE5294F32807AC80
-:10079000E67B6FF70FE27C9B15F3FEEBFACAA9B874
-:1007A0001F5969DCCE800D49BD8FDE2FD8A4EB55D3
-:1007B0007C7F3244B92C2093DC198E76F3EEF3B9AA
-:1007C00065643757C6C78B4775BC5812E0E344725F
-:1007D000147933DD37671AC6A3EC6E4BA07518F594
-:1007E0008F0CE2FA4578502AC78BAE7DE823D038CB
-:1007F000011D2EB900EF926EFC31DA5F6CDD5BFEFD
-:100800004DEBEEB14FE57C7EC67A187B88EF2BCCA2
-:100810002F15F4FCE3ABF576A38D7928440F4BB686
-:10082000DDB581F33F258DEC76F6133E5F87316EA3
-:10083000319D4F2ED7F560D1FFB60DED8DE54D1DE5
-:10084000F4EEDAF216FECE5637DD692BA3E92CA3BF
-:1008500080AF3343D43202448FB03EA2474D8F372E
-:1008600030E34F17BC63E9B8477F4A9AB93F85FA2E
-:10087000EB6D1F3EF8B6F721101F9E5DFC25067E2E
-:100880005DF4E8D6DB15039E95F7A4C737BBF62FBA
-:10089000868EDDFFE478FABD93E577E9F1AA8A193F
-:1008A0008F97B7BA2DF38ABBEBDFDFF290273A9E22
-:1008B000D6DE3AD78FF2AFBEBD82E26A97BFBCF5F3
-:1008C000777E68BFF4F99FBA3098FA98D49C857AFD
-:1008D00071ED536B5D1A9EB3487E17F2CD63417183
-:1008E00072BC7BABEA60415F1FD7C7EAF09FD0FFC5
-:1008F000F167FEDEF81F30FFBF0AA05F21BF6DFD6C
-:100900005B23DA6F7B354704E5F651293C09E5E8BE
-:1009100092B94EDF6A15E306CDFAD4D25FFD344BAF
-:10092000A1E06E7F3F0BE953A17ED8AEEE49AB8AC2
-:10093000F67BDD7BA20AC3B07A1669C4F9C5B6AFEF
-:100940006FF9CC867095411FCC1DD7B31C3809E1D7
-:100950007D7DEB7F7E29BA303DF6212BC5FEA2FCC2
-:100960001100F79A5EF432F760DD4FA9DF0B30E03B
-:10097000C38299A4DF047EBDBEF41398D78927FFF4
-:10098000AF4B288E9697F712BC4EB5CCFFE5AB4A1D
-:10099000EF72F524EA07F69E7A80D2267025BB9D79
-:1009A000A7B5D6900BFD02B59BACAA1F3ED76E7DB6
-:1009B000E2693C57611FD8553C7AACDD7ADA86EFA4
-:1009C0009ED50A5A44203D8BB98491DDFBB46CEB73
-:1009D0005FB8BF2A476453609F96FEF62CAFAFB155
-:1009E0004802D45FF6C227E4DFAAF53A7D8E38FBD1
-:1009F00054D9B2D31676C6D9A7964F26A11E14F89D
-:100A0000F557B40FC77608AC8FBB67FB9A4D7FB123
-:100A100021DD9C800D494FE5F042FBB4BE459C6B47
-:100A20004B89B76FA1EB51FF8372F2835C6CFF843B
-:100A3000C18CD3C5CB5B9F437BA0E643BB3A05C7C4
-:100A40007DEE761743FE2AF938BEFF626D9606E307
-:100A5000D658FD5932A5FC7BCDE377101E2E7EE7DC
-:100A60008E2CD2EB989663194DEBCDC1752EDC38E8
-:100A70009DD6B98879090F6B7EC1FD196725363976
-:100A8000DE3DE32D8339DFB2B3DB4A913ECE424FE8
-:100A9000E8873962633C9EF75DFEFE989DDD981203
-:100AA000FDBEDCDD83391FF1B3E0C7F8EE643DD84D
-:100AB000C5C817C477CE4EC27E56BA259F5DA6F52F
-:100AC000FB757809DFF0780E4532E24EF361BFDE48
-:100AD000A9EA8376B09D9DB2DD528EE7BB4C41FF03
-:100AE0006F543B82DB91CDF64401ECFC2359F1EFCE
-:100AF00011BEDF45F7EC5D16854FF55B8E103E317C
-:100B0000B0BB52B279FE31A443B08B52006E67DEA7
-:100B1000FBCCD617FD1D19163600E7DBF117CA33DB
-:100B20003553C1FA46FFF56D76D37B24F54FFE258C
-:100B3000869EED31EF9CF8089EF52C45417DF388AB
-:100B40002D32691B8E03E362BCE6A247ECA677C296
-:100B5000BAF1C5D6FDDDDD4D9F867DB558A7FFD81E
-:100B6000F5C7F2832762F801DB987949EF3ED55A41
-:100B7000834F237C6A815EFD44AF9CFE40478F0C0F
-:100B8000007AF8FCD9D7F6FF10FD742DD68C2934E5
-:100B90009A99CFD6BC08F48BFE348077828A7CF693
-:100BA0002B1BEABDD9956007C3BC3F77AA7829AD56
-:100BB00027DDC2F7B874EB6474AEF5FF8BBF2EEE81
-:100BC00085BFBE35D87CEFEA2C2B4EC13B0CC79FAE
-:100BD000597605F91562E06BD8BBB17C73F160857D
-:100BE000E01CCB37E1CF7E1605C7A5BFF982F0F632
-:100BF000AF39FC1CACEEC9BF91FC02B046EC80B72B
-:100C000075C12F29BF16E517E5774EC3F3EA9EEBB2
-:100C100036C333B6FC219D1F75DD73BB97F931EEEA
-:100C20002EB25DA4F7173A612E8DA89F3FEBA673F5
-:100C3000C2B5BABEDF29475CA89FAF4D35F2EC566E
-:100C40007C07A6D35F2AFBB17D821E7FE089B85264
-:100C5000A3F4A44FDA4517EA75E1209B1CFF3DC0C1
-:100C600000CD23CC7A2B5FCDEF6B89E79F0BEB7622
-:100C7000BD1DC60BAFFEEA393C373F2439E8DC72B4
-:100C8000C1EA992EBAFFD75EF07F102F16BE017011
-:100C9000447AF26BB61C80F37C0E02303FFC741E6B
-:100CA0002C2697EFDD06F5160180F19C24D69FB225
-:100CB00094795242EE9E7E1390833694FF8B411EB0
-:100CC00091DF7BA3B97C69FBE784674B63F0CC8B36
-:100CD0007896D313CFFA0ED1E9B68C95E9E7BA64CA
-:100CE000CF77EE13E93CFF948391BE81E7BCB063FC
-:100CF000EC54BB48FB73EA592148F186FE4CFE6E6A
-:100D00002BE03BEA59061EC6DAF7B1E989973E1A8D
-:100D100089F7C46A7FF7DFA53F87F4C4EF3E18B8B0
-:100D20000DF32FBF9FF7DFAC67FDCA1D7F233BA6E6
-:100D300073879DFCA19D3B5ECF43B9DCF9AA5D455D
-:100D4000FCEDBCD7CEE31A7624D3FB659DFDB9DF5D
-:100D50002EB0FDABD230C9AD357C1F87D868BF4FF0
-:100D6000B5FF9DE4C8A976BB82EBA8DF9144FEB134
-:100D7000FA571382E81FE8DCFED5C8E877AEFED547
-:100D8000F5D4E9F7693A935935C6CD74A6F238CB54
-:100D9000FA6D639E588DF648EB4E1BFAFF2BFFEB66
-:100DA0001FA5C8973A5FDC6943BE0576E9E30CF0FE
-:100DB000C3F39B9FFED49A83F7C518D9DB277EB374
-:100DC0007F3ABE8BD5132E1C0E9D00075C17C0A565
-:100DD00006F5B2DEE0B1F83B0B8F2FC99EA86D1F60
-:100DE0004574D40D1741E3DF93830E01D7FF8A0BBF
-:100DF000FD469DF920FF555CF757A5A83F5D6CDDCA
-:100E00008DFF53D66D6197B5EEA786F0F7C8BF7B0F
-:100E1000EBE6F83F64089757B174D013CF5FFE112B
-:100E2000E59F4B5669BE9748FF7BBEB3EBBFE47DA1
-:100E30002F45BFEDE5EEFBA1EFECBA2FB6EF6FE863
-:100E4000FB9E2CE3FDBACEEDFFC8A3F55EE2BAC56A
-:100E5000E2EF2A9D5F78DD5DFA91E871E0D35A0FE9
-:100E6000B0508702E9DA5EF414B5D86C8F88BABE48
-:100E7000B1960DD336A15D057A06DA016B3378BEE3
-:100E800009F40791EE0F52B00A6BCA55F97BB6927E
-:100E90008FC990B7BE3F9FE259D6667D8FE597E335
-:100EA0007905F7630456ABDE9DD03E906A51022A65
-:100EB0003E53B5C2BB09CAE5BEA28CF6CD5AE54683
-:100EC00047F43B1692D366B2539C31F64662A1CDED
-:100ED000649724B05D32FAE1135489E2FFEC2CAA46
-:100EE0003DD47715F373EB4416F4CBCECB87D32DDB
-:100EF000C5BADFECF2E1E4A07B95B20E27A669B893
-:100F00006EBB22911E2631B01FF93AB8DD0970542C
-:100F1000A2E0C8743B54D2412E29C3088E604028F9
-:100F20001347235C7D04C7408E28135CBBFBA3756D
-:100F3000C7EEC35A6522CBD7F57141FDF6E13CBC43
-:100F400098FF1E432C9C8DB4C05BB11AF5DF95ABA6
-:100F5000F939D78BBFFF1EE55BADA00FC37CC6A7D9
-:100F6000781715A3DFD1A30948A72BA7F27705CBE4
-:100F7000F11E58069AFA3C0E37C391CB24F25782E1
-:100F80009D41FE4A99A1FD274E642DE40FF448319E
-:100F900071BD32C53D056EE3714FAC8829FC9D16CD
-:100FA00073FC8F7F222BC2B8862AB1B619E7758AE7
-:100FB000253763DCA5CD1ACA23FF707F9085E86FC3
-:100FC000A9F8EB462C77835ECFF03E9914FA18E32C
-:100FD0001BEE145318C55545E05314DCAE3EE760D4
-:100FE00052149C2B58AA297FA2FFE156B413F2FD9C
-:100FF000761983C72A1D39A6F62772CED17801BB90
-:101000004346FBA84A769BDA8BAE7D1FA35DF37641
-:101010009A85EC826BB30799DA5FFFE9898D737566
-:101020009CC575DCF011BFA70AF6D6E36F42BB770B
-:101030001E610CFDC6D72965A6766DBA7F2552655F
-:10104000A5F766BE5F34C6346E5B7817C1A53693CC
-:1010500009781E5C6B0192807A3F502B4CF56E181C
-:101060007D9DA9DFA9DA5453BE76D55F9994CED879
-:10107000B855E719BE1B58166A31B51FBEAFCD541F
-:10108000DFF52698429096BDA704301D7590DF23AA
-:101090001D0EFB81E71B6DE1792AC6EB94E005D0BC
-:1010A000723C16F0546218F2C8A3BED730BD58FC8B
-:1010B00032D3DF634DD4CF5FD759822D73DD18FF54
-:1010C000D3FCE04E81E221B7158F40377473650A77
-:1010D000541F7BAEE5354C5B3BC6378D2DA76B436C
-:1010E0001D247F9D163A17A812DB4B05B27F92860E
-:1010F000DBA3CE5D7A7BA7F3EEB28AB7900ED664FF
-:101100006BCD3B91EF4FFC688E98DFB31E93A548E3
-:10111000349EDF5DE6F933C69D197152899522FF31
-:101120001D8A6B799C4CA3454DD09917E907F22491
-:101130002BC5F1CF2DE1726064C7E6166739DA9DE1
-:101140000E05F73531DD7CCF7BFE687E6FEF8B625D
-:10115000DD3F2FC999B79460FB64DE1E7D7C38DECD
-:10116000140BE9533BAF3A42767AE20D96FE2041EA
-:10117000996BB46A41BB7BE4BE3FD17B04AD53F2B3
-:10118000D7EF82FAADFBFEC40428EFF340D95E2B03
-:10119000D2D9688B8CC7F5ADA3279E2EC4F229EF58
-:1011A000524CA3310FD739812951710F734B141A47
-:1011B000DF2585E91D22D73989CA5DB3554B1EF657
-:1011C000B7CF4ABF5BB3E22AAEEFAD1894B815F1C2
-:1011D000D47540E37150454E6500D143389BF88289
-:1011E00014CEBE2599C753291778CFFFF89611A9B9
-:1011F00028B7D22BD454F47BA66F15BBEE99E17CB3
-:101200001FC4BFF020DDBF76FF3550BE0563D57823
-:10121000790878105B67D3CB9105413E5DD0CBFD5B
-:101220006B675CE3A477174DF587E677D5D71CD9B4
-:10123000DDFDF7D9BA76FF9A6284F7280BC69124B0
-:10124000FE5F2BBD2BB0629093F4871540BF4CE836
-:101250007D1DAE73491781A78BCA0F094ACC3BB9D4
-:10126000A112CCE7E57AF34A005FAF389F42F7FE60
-:10127000CF342590BCBBE2FC0DF42E67AB4DCBBB4D
-:101280008BFC3509145F36F5B6CF37AC423ABEFE5B
-:101290007811C62418EF54D6CB7F25FA37E2EABA84
-:1012A000E087F80A78FEA0A53B8FFCC0D50D4F0D56
-:1012B000DFE35A17055FFC6D97A93A3C676E5D3F07
-:1012C00003E1A32C989C8D74789A39298EEFB4FC95
-:1012D000F40C9CEFE92D560A9A6DD5F9A3BF487F0F
-:1012E0007F20239C8DF7F04BDEB150FCD141C0072D
-:1012F0000DF0A120F44E5A09B6CB90D2309EE1F405
-:10130000F8F7E99D84D3F7300A265E1AB611BC5A65
-:1013100033165456A07C3BA0A4A1BFC1806F8BDEC6
-:10132000CFBA326D6209C947FD7E8836F6B2DE9BC0
-:10133000DC79D557740EB0C60D7A7D2A86189F6B5E
-:10134000C4F72457B8AD248756A4FE755206E27B35
-:10135000852382EF3ED4AF3A43F0856EDCD1F7BEF1
-:10136000A4732253A2E2B5FA0CE5FB2F491AEDBF94
-:1013700074CE46E5B5AB4E139F36DA9FD0CF53F10E
-:101380001D46BC1F54FBB548F74481FF3509C330E7
-:10139000DD655B117D8ED3F265175F1F6AC1F79F14
-:1013A000DE4D44BFE454419E8EF3FB6DE99919185C
-:1013B0001F3035419E8EF105FFABF4239EEF2F4F7A
-:1013C000C77882755BAF9E89F1065373E49F5A40DC
-:1013D0005E6D7B6ED64C2A77CB7FC2FC132577F2ED
-:1013E000F264BEEF752537CDC4F8822A91D3C1A926
-:1013F000A6A4A0FD0274B078D53616FD6E6D8F726E
-:10140000FD77A35835E7735FDCDF8FDEE964851D68
-:10141000141FB6BA44D0E3D08CF35426E3796A465D
-:1014200001D3D0BF9CF17202FFFDA1431D7908BF1B
-:10143000231B6FFF11FA4F970B8CDECBAF65CA48A9
-:10144000A4AB7996F0C798FE66B8B789E34707C59D
-:10145000B72E5EB583E6F789AAC729CB9162CF3F45
-:10146000F52E04F41FF75D08735CF1A7166520F6EE
-:101470002BE970992776CCB1F179FDBC04CF87D2E6
-:1014800076525CB324776479B9DE5444F6527622FE
-:10149000BD0BDDD8F7C3D278BF77D0D200F21D489C
-:1014A000EEC586364AEB87325A4F1F296C53A19FEF
-:1014B000BA035CCE8CECF8D4161DBFF88A2EA75266
-:1014C000F4DFB58A8DBF7D459743C6F9F6F2BEA11C
-:1014D0005CD4078D7DEDDE9750AEBE2F0CE79B915F
-:1014E000FEDAB3F8BE09C6B5DE83E7172F2784D02E
-:1014F0004FDD3B9E18FBC068BCD644CE37222F255B
-:10150000909E14BB8E3F76C957BE9E233A9EF4B67A
-:101510008E23B88ECC7FDF3A8E207FCFECB91E832E
-:10152000BE8DEF067DF76CCFE77FF978C7EFB15D31
-:101530000CEF0CFE53C7BC45FC7E34E73706BC8D70
-:10154000791A706BED25FE565AF58A693D52C744EB
-:10155000347298AD349FF3B796EB18EE87B4AA9D1A
-:10156000EAF5B61E31F90C9DDB2C55980FF5DCD849
-:1015700075D5B2166AD7735D11E2C7CB15CE8F7BD6
-:10158000C6ED47883FD7813D86FAB7B1EE2E3E0DB6
-:10159000EB47FABE0A180EF14DBC3B28A03DE135E1
-:1015A000E9C315784322FA9CCA719B295F25DF6540
-:1015B000AA7F6DF66A53F975CAFDA6F2EF173D646E
-:1015C000CAFF40FD598C3EBF29469FFFB5A97C7CD0
-:1015D000B883F4EDB71B26533CFA84A311D2BB4366
-:1015E0000D32E577356453BABB4121FADFDB504455
-:1015F000E9BE0695BEFFBE6134A56F3668947634A9
-:1016000078288DE51BE51DE172F4E78FCE48A1F344
-:10161000A707867AA795E2D1C27B9162C4BFB107C2
-:101620005A5E43515010FCF263AC775AB651FCE15C
-:101630009A9D63FE703BE4D3DF1459827221BD484A
-:10164000645A14FEB8A684199E77BB187F0F2BB678
-:10165000FEAC521E4756CDC2FCFD805574E2CDAAA9
-:101660001DF21E2D83C44604EDF46AE6233DD4B278
-:101670008ABF4B53CD54568EF6AB97F91EA0F82374
-:10168000F37B021E6DEADADF42F90CBC670AED7FDC
-:10169000E86CA17BE42FEE4BBBA60CBECFF208F4A6
-:1016A0007B1E0776DC778783EC5DE3BEE98796CB0C
-:1016B000D127669572FAEA14D40E9CAF3F95BF57B6
-:1016C00014DBAE545FE7F58108E91F11D03F30BE4F
-:1016D000CCA0CBA9F2217DFD8A25650CD2C76ABAC0
-:1016E000CF50DBA1A80180F798439C2E46005DE017
-:1016F000BE8D3DCAE96024D001C941DD1E34E80039
-:10170000ECA7D7B0FDA9834C453BA271C27F8A6884
-:101710006F8D39130C607AF5F9C8CE6FA07C5C0729
-:10172000FF7DA48BD98F865EDADE504D78B4A3C1DD
-:101730004B69A8A146C74F1FE57737ACA2FCDE0670
-:101740003FA5FB1A9A74FC6CA6F2371B3650FEEDCF
-:1017500086A08EA75BE87B1F5D9EF94B653D2EA999
-:1017600042B72B78EAD1565BE95E3F7C427E528DD0
-:101770007345FCA81182C8BF1BD3FC56CC3726E2A8
-:101780001EE0ACFD54FF66270BA11CA8CDDEC6F5FC
-:10179000B0183CA9C8B889F0649A1EB77A20ADF198
-:1017A0000E1BE0C3899687ADE6F7452F0F2F963ABB
-:1017B000D7D03DBE58BEB804DF9F107BF243C6545D
-:1017C000B5BC9CDFE7C2B8BC4BE5F7B2A543BF1F71
-:1017D000C6EFBBD4E53A29AEF6DF2767645DCEB02D
-:1017E000B958BFCBDE4E3C3807DFC3EB0197187BFF
-:1017F000FBCF57F2F686BD0D7A26F9A13A8322D99E
-:101800005F35EE6617D9DBA3232EDCCF25DB4546FB
-:10181000FAA2C4CF771763470AC6F184F68F23393B
-:10182000B3722FF2A5A5FAF96EEC396D1D9EEF0A81
-:10183000F1E01DA638FA65FAF96EECBAEBC61FA105
-:10184000F3DDBA8BDC23FD53A9391E23F6BE6E6F80
-:10185000F882F103D1EFB79E3CDF4076DAC7A57777
-:10186000AEF78FFFF7EDDFC232CFE7A53C6E9AEE01
-:10187000C919FBD9A8FFFE66E34407DD5BE81C211C
-:10188000D37B379D027F6FA7F36F4C5DADE07B3A52
-:10189000F26E940B57AB36E2ABA3C3FC7D80F178BC
-:1018A0000F31CEFB00571D0A0692B1DD413FF99F73
-:1018B000C6BCE70DE03DDB516F6A229257D96E8FAF
-:1018C000887860C827435E75D3957E4F0E63300AD3
-:1018D0002E9DFE9405A3B351BFEBB25B9D93E85DD3
-:1018E000A2D32146D1A3861F6CF8414DC47B0823A7
-:1018F0000E7903286F1B753B73D409BF9802DFAFC5
-:101900003AE3233B680CD8A9F8FB31786F5A8B82F5
-:10191000AFE1C732F89CC1D78C7B7AB2CDBB05FD55
-:10192000CDECD5047AEF2576DE7943B95F68717F17
-:101930004FDE50E47BFABDBC2AF1FCCE6FD02EE81E
-:10194000E0F101579CEF7C1AED9E952F25D1BDB497
-:101950008BDA07F2E9B8FAA991D65BF8B9C9B04AAF
-:101960006538DA9BA8B7A21D6AD8A5B1F50BCB26BE
-:10197000960DCDC4798DEFD010BF65CB05F1BB7E40
-:10198000D59717B40B8DF1EBB78F90E7459D1FD41A
-:101990000F35CE57FEB977A7AF8A549BE4D8775D51
-:1019A000EF033A2C47FC429B15E5D40F7107601DED
-:1019B00037B310E92BB7E8BF5B712BA8E0D1F76212
-:1019C000E7338DF8C31ED5BB08F765218BCCC17CEE
-:1019D000BD10A9DD0620FC62C238D9ADF494D797BA
-:1019E0002B9F13F57BAFB170BF6B28D7670CFEDF61
-:1019F000EBFEC4F0FFCE3299EE3D77BE34CE82E7E7
-:101A0000369D6F89F45EEA3A0BE72BFE6136F529C5
-:101A100015DF1F997D8DE10FC0F8B258BEB2C5A287
-:101A2000FEE17628F7BF9DCEE2D195915E8FFA2830
-:101A3000E061CAECB094EFA4F7D3D721BCBADEEFD3
-:101A400040BE7205C0FF137E3EC79608E4F76C6B7C
-:101A5000E5F99285A934BF4BDD0FE839A914D6B159
-:101A6000B0551A86743A342D928FF45532E6833489
-:101A7000C189BFC3CAEF4501F89A585AF73CDFD273
-:101A8000E1F997A1DAE338BFA1691DEB1E463DF1EC
-:101A9000250B43FFDF9131772D6251F2F56B75E233
-:101AA00013C82F9E17F4F7E5B6F3DF21801659D13E
-:101AB0007EAA3D6AE5AFB15E0BEA5748579E57E8EC
-:101AC000FEFD5499C3925D93A9FFFE63242FDEEFC0
-:101AD0000119E75043513E703F22BD07F6BCEE6747
-:101AE000DC39F4C3996B90918722F9388F2309FC74
-:101AF000FEF3D7AAF7555A07FA6B711DBFE076FEC1
-:101B000091541FDDFFF800F82C9EFBFE778383D2F3
-:101B10008FC0CEC1F4CF60E760FA09D839987E064D
-:101B2000760EA60BCF41A7B08F15AAF6C6D00BAC88
-:101B3000A3773EC1D7D1D9CBEF2AEDD2E15FDA7AD4
-:101B4000E8DE24C4833691E29A4B5E9248CF3CD9BA
-:101B50003ECAF43BA24077FB711EA56D7FFC09DEF7
-:101B60008F2E6D956441C1FBD4A7B3286E30667E7D
-:101B700008073C27886CB7F1DF3FD2E7FB7C6AC7D8
-:101B80003A6CFFFC4BF938433C7FE178B8DD1EF737
-:101B9000F7818D38B99FE972FB067BA43CFADC30F3
-:101BA00036AE8CFCB963109F0BFF80E3F8F7896CAD
-:101BB00000E1A5D94F91AC723964A425DB6D145FA7
-:101BC000FCFCF6FD377E1FFABB7EEC75A67775FF31
-:101BD000819B9B8978FDB7C71ECEA0FA320E358B4C
-:101BE0006DAA92A1DECD8E9D7B70E9B7C89F54A5EA
-:101BF00042FED66C612FA67315F7A43405E71BA42B
-:101C000071E61755EC45D49AA24EB5F1771C453CC8
-:101C10006BECE28F958E247A0CFAFF01C9CDB6AA3F
-:101C200000800000000000001F8B08000000000082
-:101C3000000BED7D7B7C54D5B5F09A39F34A329395
-:101C40004CC2041220709200060830249390902019
-:101C50002721D088944E225A54D4915A44E53122F7
-:101C6000AD694B9B13122084A04191624518285AFC
-:101C7000EDF5ABA9052FF6AA77824AD55A1B149F1A
-:101C8000A576A4D66AAB9282D87A6BCB5D6BED73E6
-:101C900032732693F010BE8F3FBEF0D39D7DF63E8B
-:101CA000FBB1DE8F7D7600004EE27F33DD83001CCA
-:101CB000C03F54FF4AD630808268FD1239DFD07EA3
-:101CC00069C178433B4008A004608EB7D8D06F52FA
-:101CD000464F5ED00930E1A9CFEEA8F4E0031384AB
-:101CE00047633961EFA76FDF82E5DCA957FA241952
-:101CF000E043E8B862BC09E083B2F55BEEA6972D3D
-:101D00008A2D7B30C08DF43BB67F04E1D72BB05DCC
-:101D100072AD3C701BBE77739604921760F136EB80
-:101D20009148CC3A96813F2D8CFD6EDE6D7C0E1075
-:101D3000B1857D00B7049CC13637C09247B0DD61E4
-:101D400068E77197EEB3B9A97D1958A2EDB9000DF6
-:101D500087731F7D3666BC4919DD77DD8DE34D7ACB
-:101D60007C9EBB19D7F768F9E74365DC67A1D7E527
-:101D7000793F053B4C812927252C25A719B0DF8900
-:101D8000E7A59084EB9A297D911A29C4E73599003B
-:101D9000D9F89E49FE6D05B6AB2F48F0008EF3F7DB
-:101DA00046F9D167AD343E5CE7C77E27E9673ACD97
-:101DB000BA9AE1AB976F35E2AF1701FCAED1C1E53E
-:101DC000EF1BDD5CFEA1318BCB771B652EFFD85856
-:101DD000C0E5DC5720D089E3FDE91F930106D13827
-:101DE0002A4066B49C64F39A87E23A7A7E23857629
-:101DF000E17E8F574E49035AE717387FA98607249B
-:101E0000813ADC0394E37F37EC7C2EDBC7CF551798
-:101E10004EB5EC1F122838EE0D5E9358E792AEE7F0
-:101E2000B23DD17658F9AEA13FAC321D30D45B72D1
-:101E30008DF5F6AA03B1EFEB70882F6FDC76AB2D32
-:101E4000E0C272B3490939FBB6EBEB99B93F4931AE
-:101E5000E1789627ED213BEE6F995B0105FB5B0076
-:101E600094CEC2BEEF0134F17B574A10EC4C30EEF9
-:101E7000721A17E136677F12486731EE5B481BB470
-:101E80001EF53FEDA107F0BDB7D214F0C7CCF35D4E
-:101E90006DDD1FA7777CFF33ECF7F113404FB00ED9
-:101EA000F3693D13F7FCD96CC67252B2A09389EE68
-:101EB000883903CBA38BFFB9E5750F93A9DF743184
-:101EC000B6E7F5BCEE4094AFEE9CB9D581787BDBEC
-:101ED0006C06180A02F165D81FC7A0FA06EFCCF904
-:101EE0002DF8FBA5FB93C2E6B3D8CF06E4452A271D
-:101EF000550B7EBF96E846CCA300F2C3F235A0CFC7
-:101F0000AB907CA0FD53FD99CEDA3737D31AA0678A
-:101F10000BC9878F00C26DBC7E253596FF973FF5B4
-:101F20002DE6CF25D9C8F748EAB04DF0AF03FF9DA5
-:101F3000CC237E0DCD72E27A6F0A23FFC3F9E7FF4F
-:101F400087BDCE289F5F9490CF5FB914EBCB9F9055
-:101F5000BC766C3EF6E468C14F1ADFEB7CDE4B4F7B
-:101F60005B25E64BBDFEC993526D2801BC376974F1
-:101F700091AFF4D4D37C2B9EB2401BAE6FC5B48B13
-:101F800086C48EDF875E5B259063C67FF469FB6243
-:101F9000E217197A06D721FF4C7AEA444655A12860
-:101FA0009B681CE8D0E44DCF08FF0494D726FFEFD0
-:101FB000BF87F301E2F101844F75D6FC1C9ABFDEA6
-:101FC000094ADB6406CB3C07CA89CB0488E0B2B27D
-:101FD000AB7300E1B90DD12521DDCD53EA5EBB1A0B
-:101FE000F178B939F05592F36F79F379FC2B5C2BCA
-:101FF000AD606672CD31E178F3E7D98B693F739BB1
-:10200000055DBF96DEF3113D7F6D5A8AA919DF7B0E
-:10201000CD042D9011DDC76B567F4E90E9A7C6FD0C
-:102020003EE2C7A48C934EA6F42F2F8892DFD7F1FF
-:102030002845E5DF4CC9A9D23CC7DC66A67B4B76B8
-:10204000BB8DD67513840E2838EF326FD846F2EF69
-:1020500016705BA8C4A2A7973E88FE2AFFD9751206
-:10206000DF5FD62D854CD8BFB3B1132C88DFC71ADC
-:10207000F77139F28B912DC3101E2B27DBBC6DA499
-:10208000B734FA32AB263899405FF5A54F4BB41DF3
-:10209000D75DE57086A5547A6CFD28761D3FC85142
-:1020A000FEE945B8AAEB2AD3DF4715CDB43032BAE2
-:1020B000CF49360027C9F9075258CE7FF874A9993D
-:1020C000F0F4E18BD69089EADB2F7AE3361FD781D3
-:1020D000E4CD87195EB38DDA33F2422AB6DF6806A3
-:1020E00095E432EC1272EB9969B7BF43726CE50369
-:1020F0002E93DD24E858461340FAC9C677EEC57121
-:102100006E4266B57BA37A63C9F49F6C7904E9607B
-:1021100089B9E38E4A7C7602C213DD08CFBF9A3AB2
-:10212000C790DEFEF3FDF6B099DEFBF1D85D128EAE
-:10213000FF5C6A207B32E9A92C65482E3E5FFC4A91
-:1021400026B4E1FB337EF2AF97496FDEF46826F3E5
-:10215000974EF733890F713D47910F693DC79ECC6C
-:1021600067BE8BE25FC06129CA034038AEDFBDC9DC
-:102170004FF8BC2159667AB440501946F8DE773DD5
-:102180000490AE8A24934274DEB31EE165EA4B4F9D
-:10219000DEC9667E6F8919F52BD161402E26781C29
-:1021A00035C9451A5F00ADE7C8D36377B5E1FBB524
-:1021B0005AFF28DD1D5EF65F4477DBEC5E3B2EE1C7
-:1021C000A324A3DED7CBCAC9E9DCFF46C7A7602991
-:1021D0008E3E5FD6F0B9B15E080AC98DA266B9F825
-:1021E000562C6FD3E03E63AC7F3AC1F1E6CE4D8F03
-:1021F000BF24D3BCDBBEFD36CDFBBC93E785970483
-:10220000FC8E9A847EE9D5AF8EBFF1F8003B797ED3
-:10221000FDF99FEF7F636200C7FFF3DEF16300E922
-:102220006EA1D4FDFE7D88AF4F5CDDEF7C0FCBC788
-:102230009E7F6530C12F7EBD4B1A8E8325460E7D55
-:102240006432F17E97D03EF0F97F14FB2F9F5CC281
-:102250006CAA10DC16B64DD845F260A654984676A6
-:10226000D3D10F8DEB8B5FA73EBEBE3E7D7CBDDF25
-:1022700042823FEE63F22437971FDBBA3F21FC7E98
-:10228000FCF87813B262F47946F7C4F4C2289EFCD5
-:102290004A9395FA5D41A21E5131DF21F03A7FB198
-:1022A00029D49CCBFDB8FD6A7C4E78AFF234737DA7
-:1022B0009E13F519F65F92F55FBC2E12740ED46B67
-:1022C0009783FE53B7E617D8EFCD15A92C17E6DF95
-:1022D000D861253BB7579EA96F9B4F8E3F73798678
-:1022E000D093DD83817998F427E0E62C589FA6D51A
-:1022F0004D65BF6BFE05C9E7DB52BD129A8CB05825
-:102300008630F1F5310811BCD79A826CEF39480F4D
-:1023100060D966F26659B094CC3D8380E70909BB69
-:102320000A0216AAFFCA1469067C6F8DA73A8BE8C9
-:10233000FF4D70FAC92EBA3C7DED0492A3D5EE395B
-:10234000F3E979BD9AEA6EC3FDB658E50D8564FFE1
-:102350005C2E79C9EED5E1A2EB8FF916AF95E03B83
-:1023600038287B55A4DFE297148789E1EF5069DCB8
-:10237000372CC14C5AD75BCECD134C66B2D342AE8C
-:1023800009B8D9B75FF969C96FF0FDDF81328DEC0B
-:102390008179BF72B01CBF1E64E6F76F80C272FC09
-:1023A0009B10E0FA8D10B17E8AEFFDA1FC7F1ED854
-:1023B0000FD17DFD61EA677BC9AE9F2F7566E6622E
-:1023C000BB5A0D05A4677EE9F8C18E08AE4369B615
-:1023D0004012DA57BF243A25FBFDB02BF400F6BBC0
-:1023E0003D797B6A17D62326617FA9D5C147A9BF4E
-:1023F0006A067F3396D9C9815F101FFE30458CD3A2
-:102400006071B8493E928145E3BCFF8E8BE99DF433
-:10241000EEF558AF406C11BC8E660A7A53FF062C5D
-:10242000778F5ABDDD0A8D7B42F63E40AFCE30F34A
-:10243000FB7052E67554C4E917DF7833BF0FFF9481
-:10244000F9FD693D16837EF14D32071FC3FD4DFF37
-:10245000876540BD737991905FBE41E660227BF055
-:102460002F1A7F2184245A4FF33E53A88D8950D8C8
-:1024700007153A3D42642DD15B254090E81EF6A138
-:102480001ED3E7C9E3FD7FA2FA880EB19DEDC1CE50
-:1024900067484EDA83824FB03E83F6E3088297ECBA
-:1024A0003554C860C17A12BE28E4AE1BC88E6DAB2D
-:1024B000824EAA4F838844F89E4E9046FC5781CCAA
-:1024C000743B0314AEEB74FC1550B9BC04425C5E63
-:1024D0000A61A1EF416EF939CEFFD50F40EC675C80
-:1024E00098E91D1D1937DB8197DC6826BBC3F7F51A
-:1024F000C4FE426A910E174488E7F4E1320B025998
-:10250000627E010F3B3DF745E1E188834712C1C37D
-:102510001B8507CE21E0D107BE023ED314840FCA2B
-:10252000A78BA147A27914CDBEA9062F9735E0E766
-:102530007200B83CDBE4E90B97B248C012284C00AB
-:102540009F1989E966884657BF2E022E75F933BB5D
-:102550004866B8E97208F9338BECD178F9A43FF7F3
-:10256000A5541F97911E7C45E9575A509FF98AAB95
-:102570006FCBC7FA8CC76451AFA8FE451ED667164D
-:10258000E589FAA4EA622BC2ABC9947F650DCA99AA
-:10259000FC80690BF1E5CA26B4AB715F81A43B8274
-:1025A00044C7A60C709BB07FA0A9C45B84F500D281
-:1025B0002520DCEC526E13C1D9FE3DF036E32A52E1
-:1025C000D302138B70FD850BBAD70A7C560F998FF7
-:1025D000FD3FEAB6B2DDB2CE160C129E90DDDD4DA7
-:1025E000E5D1FD7DF4D8F716D3F3C786829BF40BB3
-:1025F00078E462BFABEF7ACC0EE0FA52941B14FF82
-:10260000C0F92A69BE00AA2799D6F5732944F05F5C
-:10261000D93493FD81DF16F8A717C58E8FFB90265E
-:10262000D3BC42CF8127B798E03679AC7F368D7323
-:10263000D485F2358DDA051EFA2B571629B5346E7E
-:10264000FC7373CA17D72EC37996238D909CBEA6B0
-:1026500028F0351A77B93932A2189FAD4E79C7C61E
-:1026600074A1207D927C207EA5FD2E467A24BADEC0
-:102670002FF81539C0DD6BBF227E3DFE9E6B17F92A
-:10268000848893F07FA5F383CFA0594DE35FCDE31A
-:102690004B3D8B882E3F497FD5F627E6CBE182EE76
-:1026A00034B9B5FCE9CF997F9E324350D2FC6388A0
-:1026B000E1BBE54F2759C83F5CFE1708A5E0FB15B5
-:1026C0004F3EDC4CFE4E39FAFFE4272FDDF373E674
-:1026D000B727495F22E896FFF753CFDC477C7A693A
-:1026E00012C7A1A6BD7A389FECA0E98723CD883612
-:1026F00038FAD41BC304FDEB7EC9DF4D67A3C7675F
-:102700004AABEE207CAF40FCDB71BE15A6A0A85BF7
-:102710001D6E95E59EF093176BFBF818BAB72C6009
-:10272000B9A21E28A7FD6449C0F23124FC0919FF93
-:1027300011FFDF7238B496D609D21736923727D0F8
-:102740002FA67DDDF250BCDFD173A09CFC6EF28B16
-:10275000719F4B3B8DEDCB63F543023FF98E222DEC
-:102760001E960339B4AF5FA23FF4C7D134EF823471
-:10277000B20FA7525C2181BCD4FDE3DDC9D55B8AD1
-:10278000D85EEE94881F2A2C89FB5F57A8C5793440
-:10279000FB7FC5FD12FB712BEE1F348EFD648D5F38
-:1027A00021EC65FE7D94F40AD199FC021A19643F6C
-:1027B0008A35C3B6414C7337B59AD88FB14BB77AC7
-:1027C00049EF4F7A70C8CDDF65BA49754316D5A772
-:1027D000CC7FC8C3F655908435FA556C673E9ADEB7
-:1027E0009347F33F9A2E838AF33527F5E4919C555E
-:1027F0009F727849EFC6AFFB454DEEE587276F8D99
-:1028000078049E89CF739F2FDF4A783E867C4EF8EE
-:102810005BE11A33049C64375C9C15C1B259B3D395
-:10282000731F1A97568F70F1D17A63ECEAAE835713
-:10283000A490BDBCD7E24F7163BF6387F20C7E509A
-:102840007C591246E4140FD0FEC69CFC4002B8EB43
-:10285000A56FAB85E1A5D3ED2F1B15F8A395F0511E
-:1028600029F6A1DADD761FD15F6806F9932BBE0940
-:10287000EE36ECBDE2851F373BA8BE1E989A8FD17D
-:10288000FFA8FF07E610D9E33F4C99786725D6F7F4
-:102890007C68117E8AAABC521863C7DAB3CC201BAD
-:1028A000E8B55B5A4AF298E81EE935494E06398682
-:1028B0001E530A320C759777A8E1FDB4B23C437BF6
-:1028C000BA32CED05E0A0D9100AEA7244B7287704B
-:1028D000C5836A8B0CED76A4EB30ADF3536147955D
-:1028E000E13FA16F836C0F5544007E847430F52363
-:1028F000A39D5516E9607F33E990C51007B09F226C
-:102900000EF53F3A7F0D87E1C45F48FF5E9263C7D3
-:102910000E89B893ACC173458ED0CF2B5E90D80E84
-:102920005CF1A199F5C431F0F6E287E4A3CE77F12A
-:1029300070CFF41BE13C64BE11AED901235C872D3E
-:1029400036C235276884EBC806235C7355231CF315
-:102950005BA71AFA8FEEA836D42FDA3ADBD07F6C59
-:10296000A8DE501FFFD05586FE133A171ADA27ED5E
-:10297000BBD9D01E4F5793C32B0CEDF6D4D799AECD
-:102980000E205D99501F143FFFDD38BAB030DC4B8C
-:10299000863BBDA118FCABF88FF05FA1E525A680B2
-:1029A000DA4CFC78AEF03FB518F13F3E8A7F5DAE61
-:1029B000F6C7A73A7E0769FA1AF93342783F569666
-:1029C000C2F4F2F2F3C70E2940F84F8522DCEFDCA7
-:1029D000E9228E22C9C156A2936E707590FDB9CEC0
-:1029E0001264FF4545B3F00152CA71FEE6D7CAD062
-:1029F000DF8C59679D92049698FD4E0E771AEAC5B2
-:102A0000CFEF33F42FE90E1BEA930F8144FAAAE8C3
-:102A10004DEF335496BCA770F8ABF483E033549673
-:102A20007F1ABC9DF46FBC9F7B99DA24A5E1A2A616
-:102A3000FEA3F319346BD03F1BA192DF1BB935D530
-:102A40006B1A8AF0487EA799FC6F403BDA8ACA0865
-:102A5000BA7F43C884050EF1FEDF932E5E43FD4D21
-:102A6000E89F13DE112E0564EF3540B297E0427601
-:102A70000BF961305BD8F36B4D2ADBA349688F9269
-:102A80003DD25CE5677B79160487D3F32B4059432D
-:102A90007C2799D17EC5E7C72F0AAC2C2E118B2538
-:102AA000FAB9FDB8CCFEF774F2A719980A90DE3B8C
-:102AB0004ABFD3FA207CA5427110D265B8FECD6D15
-:102AC0004F5EA952DCC903EE08AE3B204006EDC5BF
-:102AD000811F14A31C3E6272AF2DC6775F9EFAD78A
-:102AE00011648F34150BBBCF2E21A49006862C5079
-:102AF000809EFF2047595D9C198DB3F4473F7A3C77
-:102B0000538F6FEE690C7369717B25A2BBF8B863B4
-:102B1000C4ECAE994CFA6F8589FDCEBFD2E2CA797A
-:102B20009E5496F30EE8B6A7F392D9FFBF46C39B17
-:102B3000D9D1BDE67BF8DEB541616F2D3479D95F1F
-:102B4000BF25EB238EA3D82513F8C81F4A2BDC25FD
-:102B5000E22F7ABC6498742676D6A9F67B4BD6878A
-:102B60008678153C3228617C3D3ABECAF08DD9E7A3
-:102B7000F6AD1EA1D7C8CF3FB23EA71A5213CDF370
-:102B800009C7AFAE091E34F0C5750D6F19F8E07AAC
-:102B9000F55D437BC4D363A57865E4F1EC59145F1C
-:102BA000FF78AFBD94F080F87FBA38265E17593FA2
-:102BB000BE06269ECE7EFFCAEB38DCD8CD78D5F790
-:102BC000FB4EE39B5C8F3446B88CDFAF1E1FD14BAE
-:102BD0001487AD64CFDC2EA1BC207F97E485274607
-:102BE0005E001490FD7FBB34CE4BF46EDB1FFC09FE
-:102BF000B5F734D9DDBB7C1C1FE1B84903D205D938
-:102C00000DE014EF2FB439D80EBDDE27FCE9C35513
-:102C10009F5D4BF66B2EA47A5106127FFC9EE22636
-:102C20000B4C69ACFFD7661FE0FA7BEB41E48D16D5
-:102C300087EF277F75796AAAB08B15EC8FF5A319FA
-:102C400066AEFFFAA2C0FBCC8F8561CE6F2C1F222F
-:102C5000E279E0898C203EBC4DF67F58CC7EBC3BAF
-:102C600040ED8B33D0DF46FAFDC0AC4E34E1FBA320
-:102C7000F7645C6541BC7F90AC7E42164D8E2FF5AB
-:102C80002AF2333FB009FE9DB0E7EFCCAFEF9924B5
-:102C9000F6CFD5274C1CAF0167C456877ED8E69186
-:102CA0008113347F8715ED49A7785E3F211A973D40
-:102CB0006AC592F83F49945F148B3CE4BF8A85FD56
-:102CC000AB97430866F87C8256CE94DAC750FCED89
-:102CD000D8363B90DCC2F915F2B7D4A7441C7F70FC
-:102CE000867F0908BCB8D7E17A3DF9F271E23F8FDF
-:102CF000847E2DEEC3EDCBE571F5782E39B0A9D8E1
-:102D00007EE471FB4EC25FEF7A0F8978D8C7EBC7BC
-:102D100073BC5BA713B7862FB80140B40FDB49ED36
-:102D20004B5F38F20EC5E7FEA338E0F1E1F80BCDBA
-:102D30007229C9C9A5A95D1CA71BE393F93D5C2FA6
-:102D4000EF17E5560BFAE2B0D411E1B8DEA9E2F7CD
-:102D5000FDEDFFE36F766F29E478B53C91E48A3EA0
-:102D60002FAE638C2F26CEAEAF233ACEC0FCA3C7C6
-:102D7000A1F5FA9FEF5F3746CB235CE74FA097A7FB
-:102D8000E9746C4D1CF79FEF13F88DC74FD145C107
-:102D900010C7F3DCE06EC6FA6C0D4E1F5F89FBE1D5
-:102DA00078883299F0BBB4DEE92538EBE30FCE80AA
-:102DB000C0CF079867C6587F0DEDFFE6A0C813E89F
-:102DC000ED487F22CEB93E85E975E9D36FBDF33D6D
-:102DD0009CE5A69F4C2826FDA1BF1F0F6784EF1816
-:102DE0005ACF4249E4CF10BE75347E7C7EE06CE160
-:102DF0007A34A79BF5C2D19DDF09D1FA8E6683DBB9
-:102E000084FCB8F4C95FBD699A4874E20C4B58C29F
-:102E10001E63FC2B5E4FB9217035C9113BCA11B23C
-:102E20006FECFA7BC32D86F766672937FA585F2B5C
-:102E30001B481ED955E1AFE507AAB8BED22AFCB59A
-:102E40003DDD6699F87B8F0542A4C7571ECC50C95B
-:102E50007E5C8976077B3A05415E2F24A31F949EF2
-:102E6000C06E307965AA57A6056E277849DF98713C
-:102E7000DF23B9517F54D797259ABE570AAF6BA667
-:102E8000F17D5A3C10ED4C8E77964340B323B43815
-:102E9000DCFA031C87D0E5B60DE63B28FEB32E73A3
-:102EA000A183FC431987E5F89AA73E0D06B023D706
-:102EB00034A2A4BD285AB7F6E3C7EBE703788D83A5
-:102EC00069BB40C21ADABF7A20D24276CADC177BCD
-:102ED0009EC5B26DC28391D5D4F6C54989EC4887A9
-:102EE0006607703198D629DEB30D5F7BAB09F567B5
-:102EF000B2D7024762F4A00339FF4881362FD903C5
-:102F000059BDEDBF25BCF5B78FF3556E40F81C19C0
-:102F10003D40BBCDBB3811BFC7C32B49C36F52E186
-:102F2000AC0FC9E04D82987DB3DD135397A2F02218
-:102F3000D54DF8B746DB959309F297675A12DE8FA5
-:102F40005863EBE183EF19EC8110AFDF6AF183176F
-:102F5000F767F360BBE11C86AAC5C191804B357A47
-:102F6000603638F5BEC82EFFBFB52F1AD73FF8829E
-:102F70005E9F7A81AF2F7C81E317EA2E6CF829756A
-:102F80001736FCD40B7C7DE10B1CBF507F61AF4F2B
-:102F9000A9BFB0F1AB5EE0EB0B5FE0F885CB2E6C28
-:102FA000F829975DD8F0532FF0F5852F6CFCAA6CAB
-:102FB000073A2B81CFCDA6B7984374CE46AA0973A2
-:102FC000DE384F058E47A7AE07CE57ECF20A3F4AD0
-:102FD0008FD38FA52164F45BACEE6CF2AB77B5DCDC
-:102FE000557D038E73220B174FF9FC9CD7151A677A
-:102FF000E74CE0FC85B3E5FDC314FFCA85B0379C00
-:103000004B713509C23176E935C11408C7F813751B
-:10301000CA2043BDA47BA8A1FF8D5BF30DEDDFECBF
-:10302000186F68FF466BB1A17EBD5A61E86F87DCFF
-:10303000B602CABBB658BC9407B3D0DECAFBC20DF9
-:1030400076DBF83D05FF911F938B9E50EFB8B88F4C
-:1030500074D56618D719D77EAA7C407C3EA1A654A9
-:10306000CB27F47EBF20DE07B72761DC53CF27E8EC
-:10307000F81C6349627C6D5245BE69DD4CE147CE68
-:1030800068719B286FA9E36F3CE83F6E33F99B0F93
-:10309000350A7F5287437A48AD667F74B7A08FB1F7
-:1030A00035E6109DC39D293993699C1092B41BDBB2
-:1030B0004335F59CD7D4E9607CCDA239145F6DCA45
-:1030C000199C4DF184DC1A81F7E5FB8CF8A6B42D30
-:1030D0006D29FD90C4EB4C6FCA28A2BC5D1FF83F60
-:1030E00022E0A99F334F8F83EFD89011FEF1F8397A
-:1030F00053F8AFFC92F0B7D5CA5D69140F5541A6DD
-:10310000F8CB733963CC0C87562FE3A116BB113C67
-:10311000735B81F33AF174D7DE08E19A183ECDF57E
-:10312000861582EF4CA9B09AF909DF1D027C1A942A
-:10313000F3EC3B5B459E16CB641A1FF6C943099F0F
-:1031400021B59ED7BD6BBD2D99CEED7DD664063AD7
-:1031500017BF2B571E4AF9AF5D4F98E6C79E034233
-:10316000ECDBCD59BC0FBBB98C4B8B2815AD048B58
-:10317000680F4B541FB1CA1C874F55A2F6F4DAE40E
-:10318000B8E78A89FA6F28CD63BF344DC930E0CBE8
-:103190005A66E46B04E32B85280747D2EF32D195BA
-:1031A000A093D06B526835C7517A4C8B896EB4733B
-:1031B00015E96BEA81F24E4D39DF9ECF72AAC9C67E
-:1031C000708755822EF4FC9FB555D0613CFDB8BC8C
-:1031D00046FAB14AC34D228F25F8445FC74E459B3E
-:1031E000375B0295E59B6D28F181356E3C3B0949C3
-:1031F000922B1EC17F4EA8077ACF5966E77C3548CF
-:103200008719FFD629008362CE23C4AFF794EBFC65
-:1032100092747EF01CC9999D35E2BCEABA35E27C15
-:10322000E389E7859E98D1EA36B3BC0199E50BD2D4
-:10323000C1DCEC52717E88E0D9AEC91B3BD4A551EC
-:10324000BB4EE7B3A4E155B1748E72E44517C9B320
-:10325000172C1CCF5C6795AB6FA0F672BB7B35C398
-:10326000B3B088D6ED6B41B943F1C26E01275D5E04
-:10327000C4C3AD0862EAB9443A89E1D89F3EE893F5
-:10328000FFD7E1588A70CC3F7338DABC42DFA6978B
-:10329000097DFB5CCEB7F955F721717E265D0106ED
-:1032A000DA7155C07596F45198E4CB2605E50BB656
-:1032B000D76AEDEE32214F7438E78925F6CA934D6F
-:1032C0000B2083F8DE4D7076125CDF67FDDC512247
-:1032D000E00C10E13C67AA22F8649D15BC148FED48
-:1032E00028777A292E98A768F06DD5E065025322D9
-:1032F000F8CA71F04D8DAB9F297CC74CD1E03B18CB
-:103300004ACF06BE9B525205BF8D12F0B13A237CC4
-:103310007EB935D7E25D8D74D8958BF0C6F6D6D7D9
-:1033200004BC7FA8F55F3301B8DE9AB9368BE1950E
-:10333000BB288BE478ABB543A57C552BD11F9FF3FD
-:1033400014E7BF5C1A5DCF44FE5E88EFAF45F944D9
-:10335000F9C6D4B28083C66B2DB480C4FBDFE64DC2
-:10336000B47F87CF669083C3161BE19A1207C7A468
-:103370002FC9FF7553BE1CFFDF49BF62BF75A39104
-:10338000E538DF1872109C6C657F71101DB595EDE6
-:10339000E2BA0CA1D63CDCFF1D4E6167B595D50F96
-:1033A000780E6A972617428D0E2EB737BA51330121
-:1033B000DCD598C5F58E4699CBF6C6022EDB1ABD34
-:1033C0005CB6369671B9A651E1FE527951157F0F60
-:1033D00036876915DC8E4FC061EE3B5F7EAB518F47
-:1033E000E5AAC906B88F6C30EAAB41B5467D95AE0B
-:1033F000E419DA5DDE7186F694822243BD704AA03C
-:10340000794A099D8B9A6A78CFE6A936F4D3CFD151
-:10341000B59589EFA174B8E97AC9A9F1F73A6B2497
-:103420008BE2D8CE32C19FEB35F8B56AF04B5680AF
-:10343000CFC5D80E49DE1010DFAF65FABE03713874
-:1034400004E1D295738542F6419B2CEC742B887372
-:10345000BDB62CBFFA0D7C9E847A8BF2B6B6F929E4
-:103460002C0FEEF038BD748EB6AD6C859BD7E3158E
-:10347000E765DCF82F519C3FFEFC8C6394F1DC8DFA
-:10348000F514E7171F9C12FF3DAF46A7951909E5F4
-:10349000471FF9DA9B5FD96FC8AFB46BF9157B3F53
-:1034A0007248D74F7ADDA9E55760B82F61FFA81D94
-:1034B00025F2071B292E1F937F705526FE7EF3B938
-:1034C0002912AFF3E01499DF7359BA81E474AACFDB
-:1034D00018B7772967363FFEF83C8349FE02CBA533
-:1034E0001B92030789EE9447847D92345CE86D1B40
-:1034F000282ACB2510F90EEE6FA252E4737AE50B61
-:10350000898618BA73F6F16745DE833EA320FAB1C7
-:1035100044DF3F27FEEB99962D8D03E77F5AFAC9CA
-:10352000FF7C3E45FF3E0C7A3CA500BA6B8EF0FB5B
-:10353000BC1FF885095E2DA64DB57964E7F92C5EB0
-:10354000C4005479E57D948F5CA3A4B25E5FE395DB
-:103550003B890F8F2B4E2FE16363610D59F090343F
-:10356000FA59D63F2D74BC26060F7ADE0914A5BB86
-:10357000468733E9DB82DAEE9A18BA583F610BE7E7
-:10358000EDDABEFA20E7F3DAE6FE94F3796BB3677F
-:1035900015505E38C93BEB43CEA3424C5E8AF447DC
-:1035A00081317F77F2A4A8331C28FEA0E5F9C0631F
-:1035B000CCE359647F743D70EEF104C385FE018B4A
-:1035C000C2DF13F4A56FC1D77ABFFEF940D5BF2B78
-:1035D0005D4DE77F5B3D428EB682F7CD00D55F92B1
-:1035E000BCAA4CCF8BDEA4F3A46B875B182F6BB304
-:1035F000EA5B85FD2EFCA556CF6A961BF1FA9ACEA2
-:1036000063C6CA6B3A8F192BCF5BE5FA01F5717669
-:10361000C01CA7EF8DEFE7048D7A477F2F29EBD2EF
-:10362000576B62CE43ADB7F81D242FD678EE320526
-:1036300062E8F9474A606E5949B46ECD9ACBEFD92A
-:10364000737C09D7355B51EACB3279FF03DA019BF2
-:1036500035B9B845D32FA7DAE756ADFF8FB4FEDBF7
-:10366000489F5F14C5CF98516393583E5F22E43161
-:10367000C13C76DEC2B2C0E2D87D10D3F4C205E907
-:10368000744CE1B824B2379A2F294A223CDD3D67B9
-:10369000E0F5E87973BD9F9E278DCF9FDB3C6603E5
-:1036A000FC7795897322CFBA1655FF08417377AD21
-:1036B000A0A7E64B845E1EF388D8475F3A34AEF786
-:1036C000EEDA81ED9FF8FE1439ECA513AE67C4D590
-:1036D00087C6F5CF8B6B1F17D75E14579F1AD7BFBE
-:1036E0003AAE3E3BAE7F7D5CFDAAB8FE0BE3DA6FDF
-:1036F0008E6B5F1157FFAE119FBEABD212C1311E50
-:103700007F7ABFD3C5DF6F7D553F23FA1E03054C7B
-:103710002F3ABD9D2E1EA276AE97E9CC56366E1F6F
-:103720009D8FBB0BED2BB287EEAEAD760BFB22B0BF
-:103730007AAF461FA41F2C5F15F374E59426B13FA2
-:10374000ECF418E4C8A9F06D820C63BB12637FE649
-:103750009D7B7C9F9A3E439A7E1C78DD3A1F174ED4
-:10376000F1BF43708790F02F75BB76A72AF867A743
-:10377000BAB07A33C9DB56B3882F6BF79D64D0405B
-:103780001C070F684A3862227CB712FEEDE4070876
-:1037900079B25193271BC83FC0E749A3825B29AE8A
-:1037A0009B7C888FDFC07A5FD1DF16127ECA4B7791
-:1037B000D2F7611B26943DFC63ACBBFE2141B818D7
-:1037C000EDF3896D0AD92C1D4A46129D174A3139ED
-:1037D0003AC93F5C53DCE11F85FD36EEFFB0F319BB
-:1037E000C4B39C65F326615DB6F49888DEA0D0CBA7
-:1037F000DF9DE13A55F2FDAC953D8D89CE956E9CED
-:10380000ED369173985E2B9B557A6F4AC0548EF0BB
-:103810001BD90A663A479CA186F9AC4D75B9CCF222
-:1038200065D713C850BCDF9E6C82D767EB6DFBA9D0
-:10383000DA3F3E40D2E2736755EAE3A409D2A01F03
-:103840008EC3C816ADAE6EDB46F78F3825511FFF0D
-:10385000C48E05AB0BA3F5EC27760CA77A7BF10899
-:1038600013C9D3744F6AC27B60A6970BF9B96BFD7D
-:10387000A2918101E84B267F6D0896855A4934351F
-:1038800005CB515A296BCFB3447D0AC10DE12937CD
-:1038900068ED1E519EEB79E2C757CADDBA9D38D458
-:1038A000CFCE3F143A071BECC5E9E599FDDB8B68E9
-:1038B0001E739C7687551E4AE70477ACB701DDEF8F
-:1038C000B02307C477C66B6C7C2E142CEEA157B8BE
-:1038D000A2EB0EAD19CCE7CF432630C46F2DE5C265
-:1038E0006E3D5E6ED2EC9E2FC2F49DDE0E2D8FB328
-:1038F00003226E8AD747F1FCF0022506CF0F957F91
-:10390000BA8DE8B32B6751F5167C6F538B99E3257D
-:103910009B5AF298CE691CB28F4EAC7AC54CC1A5A9
-:1039200042E834939D3F8EBEACCEA72B8E025C76D0
-:103930006AF2F967C49F38F16850F8F908E861E065
-:10394000BC511AB89EE0924FA24D22FE91CD0E9C22
-:1039500067D993E95589F4F62DE5BDF6F8624BA9D0
-:10396000E65FC80CDF5BCA13D8E374029FE38D8A5D
-:103970007F29B53BF71D0C0FC3EADE378CF449787D
-:10398000AB8FD133AB35FA747BFD0AE1707669E019
-:10399000DBF4FEB2AD7F3B40E6A8ACBACDF4FEFD51
-:1039A0001ADE178583B3689809DE7035F51FDFB01E
-:1039B000733FC5D10A82B7560FC1F58D51EAAA3DB2
-:1039C00044434AA091C619D51DA97261DDB9F560BD
-:1039D000389BD73391C7CBD3D783F450C774E41641
-:1039E000F17B0DBF847F3A97BC689B800FB667F36D
-:1039F000FE2CEEECD8F5EF9C8974E1EC4B170DDA58
-:103A0000BE3647E10856A35FB339111C753AD5E1BC
-:103A100071ED233D6B2897B920D4FD1CC941FF5699
-:103A2000F74C2ADDA581FBE87D5F87BF99F37C7B9E
-:103A3000BAE9BAA15EF838956E4A1B613F653BE171
-:103A40007DC7AA23D51C97D907C2DF89D3877A6996
-:103A500055E2F30BE23E9C49FB8C7632D2ABB2C509
-:103A6000134BAF66CE5785347D126A45FAA5F956D9
-:103A700009FA0DA92BDC89E8EC414DAFECD6E856EC
-:103A80007F3EAA9F73954F97EBDF9343966484E73D
-:103A9000D303F17D1A78991F900FF653BF0CE20300
-:103AA000AC8F5C25333DE87CB06CDFDF0E0C637FB0
-:103AB000522EA2FBD9F4795FD2E645FA7C91DE5F03
-:103AC000B6B5E700F98A235709FA7C95EE06CB8C48
-:103AD000D219FA8FBFA17E3AFDC4EFE3D71A5DB8C1
-:103AE0004BFDAF121E176D0DF278C83FAF31FF6C62
-:103AF000ED0E2731CB29D5B49F1D1DE0A6FDD8BF03
-:103B00005FD44572E1448389E17A5D61788D19CB98
-:103B10006B468195AE13AACB42B2C9A33CAD31EF3F
-:103B200037BAC3883FA49F3FD23C259E804D04AD49
-:103B3000833696A7FDD04554EFA93AFC57C5C9DD99
-:103B40004F0694BBA739EE774B954F699CD35EC760
-:103B500069F6D3E34D7DE3A6E39289AFDB5AEBF53B
-:103B600038552DDDB7B38BE2A608D735AD03DBABF7
-:103B7000218D7EB76BF47B971637EDD0ECA23B4ED0
-:103B8000376EBAFE5815FBBFAB80E340AB53269AA5
-:103B900012D14DAE6AE4CF910DC9717152A3FF9A53
-:103BA000AE18E3A6F49DE799C44DE3E3A58553025F
-:103BB000E3A796F48D9B42E45D839DB9A655C805A5
-:103BC0001D7E636A6EE2F8E72E8F3914FB7D845EFA
-:103BD000B66B70D3EDC936821BC3B3408B3F7B35C8
-:103BE000789669F0ABE5FA18B2E23C1C471579F714
-:103BF000B177CD5F4870CC02CE1234E53C9895E8A1
-:103C00007C3D64C5D8D148FFEBD66B79B42CE0EF8E
-:103C1000439FCB79BD369FF29A59668ECFEEF2EC78
-:103C20002FF831D79399EFACA07614E07C63DE9B3C
-:103C3000AFD27CBBCAEC6E711F07A4521E48CF4B9B
-:103C4000E8F99CB64C91CF711568F99CB8F9ED7004
-:103C50007D7507CD5F20FC977EE9D9A7E523B43CAD
-:103C60005046A1315FE188CB57C4E72BD7AD5FB891
-:103C70007F9788B3B09C1E73C3D864BFABEF3CEE94
-:103C800039463F6EDD58DD9F7AD091089EA93546B2
-:103C9000BA6CD3F0DE9C29F211A71A1F2A930DFEED
-:103CA000555BC1E9C513F47EE48FBA13F48FF7476F
-:103CB000CFC6CF75F3F8C63872023F77C354115799
-:103CC0006179B26EBDD87F6F5C4DF3AFF47346FA85
-:103CD0003856CD9FE37A6E545EE9F9B0516E1BFB06
-:103CE0006BA3B47BA19AEF4D09ADCEA5FCDADC1E27
-:103CF000CA478EDA2D71DE7D94D33F94E2AA5DF738
-:103D0000CCE2FC78767260C7D498EFE076BBBE9DBB
-:103D1000C579032DEECFF7E3A0FE533715772B645B
-:103D2000F78E05BE4F27392E2F107F0F4E9FFBD8E1
-:103D30002A841ECBBA1A12DE6FF2BBA9426F46E587
-:103D4000AE3F59F8F1B3194E0F74D4270BB9ABE855
-:103D5000F501FDE073256F1FE87885BFEB39E103BE
-:103D60004DDEFE0C2E4479FBBBB2C05B09E5ADA570
-:103D700087E5ED235394B709CFD7D3851E8487EB0E
-:103D800012DFC3E3AAB850F1F098C043A18E873B7D
-:103D90002091FF7801E021B922111ED0BF2278A91D
-:103DA0003E25A52293E2A68A93FAF5E2E3EB89F990
-:103DB000A2E23CE36393868F3BB5FCED460D1F1BEF
-:103DC000081F76CA570A7CACEB838F23021F653A23
-:103DD0003E9E3E2B7C64D46418DADD95467CA4FAC2
-:103DE000F20C7567A1111FC9A38A0CE35D5F218BDB
-:103DF000FB90864F35F4EB8B0FA35F10A0F706F016
-:103E0000B38607BAABE81BABA1F33BBB483667F9F7
-:103E10003BAAA8D4F7B92DCEAFD3CBEB35FC65CDFB
-:103E2000488CDFAF69EDFF2E57E656C4F2E7571214
-:103E3000F3E7E59A1C0D9429F30CF47369E2FE573D
-:103E40006BE37F7D8A72556C7FFCD92CC5D8E5FD6C
-:103E5000EDFB8664E57A7A2F6B86CCF1D4DD4DA933
-:103E60009C3FDB9D24F2656A93D3703FDD48FA0DD9
-:103E7000EB59DFF8A24BA57376741F105A583B6FAD
-:103E80001D9CB70E9B76668C594D70FC56453EAF17
-:103E90002B7F89FF6DCAF328EA51933887B480EFEE
-:103EA0003532850799E83E2C70679C561E09E599C6
-:103EB000B8BF6D2488EF8521C87A50F2433A7D9FC0
-:103EC0006C01BFC89B537FF11D216F3E05C25C771B
-:103ED0004184EB699ABFB7AE2297C74D07D92480BA
-:103EE000E435911CD5F9D4E10932FD7B1ADCA6D565
-:103EF000E4D3599057C91F740EE7EF76A11A54CA3C
-:103F00006B99C0C1F6A669F381CF395FA77F67F8C7
-:103F1000C220F19DE169EEEF74FBB5D0FD7B9EE818
-:103F2000FD7B2D9A3DA0DFBFA75607F93B7275B503
-:103F3000DDDDECE9FB1DF9E6A9819D44877F4F1A81
-:103F40001112C9E6E0947AD7391DFFFF9CE7F19F73
-:103F500038CFE33F47FCD0DFF81BE8D772CAEFF950
-:103F60005FA07ECDAE52B63BF5321E6FB3D1FFA738
-:103F7000F54A8E5787BE37286ACF390F9BD82F6AEC
-:103F80003689F367EABB26B6BBA050D08153868240
-:103F9000DC49D1719CDEE048117F127198A6DFDF09
-:103FA0007E11D9DF3F4C991B49C3F15E3E28EC3F9F
-:103FB000CB8CC836BAC779489ACDBB0BF9EE0E6DDB
-:103FC000BDF6F22977DE86BFD64F376BE71CBC976C
-:103FD00014F1B9A53911B21F5DA516997206CEB8B4
-:103FE000FC66BBA583CF19B7EFBEAB6A1CD039E521
-:103FF000E7DD2DD6BEFB746AF9CDB1526239F89770
-:104000006949422EF98CF7061FABD0CE41A5422A52
-:10401000D991967F2B6989CE05E8A53E7F892752E5
-:1040200043DF5947E8B236C47349595D52B287CF6E
-:104030004774137CABBD6107D9BF0F2F0CDE14FB97
-:10404000DD797B19B8C88ECF9D2ECEC3DEA3482E56
-:10405000BA47E3BE8885EF17BF6FC963EB53B0BEA5
-:10406000EFB0D94DF068F7BFEB4CC6FAC3382EC994
-:10407000BB97778B7B26D505101A8DF06B27EF1237
-:10408000EB7B15E073C0EC90956A57F221FCDFB929
-:104090003853C01B8275743FE7A6948BF9DECA9C27
-:1040A00079222E3C4B3ADC45EFDF576667FCE56B27
-:1040B000E7754C6A1DDF5B99B9C0785EE7BE95DD98
-:1040C0002AE1D75D6E77D33958909CAE89F8BEEB64
-:1040D0002766905835F6F0E4B324A75897579CA369
-:1040E0007B580EAB74AF7126BED7E4E6DB110DE74B
-:1040F00082F66E15FE69DA64A717291DD71B776E45
-:10410000485F5707AE8BEE37768DE2B844C63CE386
-:10411000FAD2E2FC06675CDD5BD97B5FCF18C2F7A1
-:1041200071FFB78B5FE556AF9CC8FF6C6F84EE9A4A
-:1041300098F309CE7EE281975F2CE8DA96FDAC8396
-:10414000EC94E3FED73D848397FE75E03D3A2BF770
-:10415000D2BF5FDCB31CE1F39BCFDFDCFD28EDAF0A
-:1041600061C32B44AFBA3FC66730713DCFD5D91874
-:104170006EFE5AED3CA7AFEB59AB8FDB39CFB47174
-:104180007F12B78FAD845012B68FB528D9DF24BA0D
-:10419000EB96BC4D320D22CE23EAF8DF78ADDF047A
-:1041A00013088F7E89EEBD9829BDA4B8F0FD7B96DB
-:1041B000804CF8B72DE9E4F3EABE95E2BCBA4FA90A
-:1041C0004BE2F3A6F3CC7C4EA4A9EE8A4B46637D6A
-:1041D000CF25E21EAADA95CA953CBF22E825ADBBE1
-:1041E000D4BC92E8325BDCCBA49F372D811EFECE7F
-:1041F00063ACB7B3CB46F266010298D6D7AEE14BBB
-:104200008B1B94F8BA55B2275D5E231E33E2F0167D
-:104210008FD79B743C8E85B18447193A92491FDE33
-:104220000FD049F707DCB3F2B12BE95CDB71358DB8
-:10423000E1D51F3FBF83F6AA7211DDB7E2E0B21BE2
-:10424000ED552AF7A0BD4AA52B5875F54A5CF7E352
-:104250006FBCFCFCD771BAB94ADDA57C544BCB7F4F
-:10426000012C1A518D70BD96B857D4B72BA300FE00
-:10427000E0930CF58D1E4BF4DE7FFCD595ADFD1D56
-:1042800000F5C4764A40B66759B47C9BA8CF253F59
-:1042900024A67DEF1C63FF8AFD31E357E27A97DAAB
-:1042A000B87D63E5A2EDEAA868FBC7D3B03E1CE089
-:1042B000A0663F5EF380D9BF2B817C7BA952D87169
-:1042C000967F834A72ED5319D8BF97CC0ACB77C833
-:1042D000B3C889EECF03407918EB97CB46F95AAAB9
-:1042E000F185C55F055A9E0CBED0E30FF8F3F8EFD9
-:1042F000E6F2BD4B6BF22D7CCF10EA03EF40793B29
-:104300008BC7F297D8FBB97EAAD3C168184DF37F4B
-:104310000A95BFAD623E88B99F01D73DA3E399617D
-:10432000CB711EDFE1648EA74AAECD29344F4B63BB
-:104330002BCBF31F29813D9531718A96F445C52415
-:104340005FF4F332D1FB8DAE309FC9FDF65D75078A
-:1043500080F4C2A7485AF601E8B0A571DFEBB48E2D
-:10436000B58D9D5C3ADD0A0B1BBB25C8719FD94AF0
-:10437000E0C5CA12BA570FDB63F8C4EAC6F70C7E71
-:1043800087F1DE4DD91D7112DCEF29FBA393E66F97
-:104390003F24F8FA9E43F57C8EA1DDFB4A12F1CD55
-:1043A00071BAE0F14BF0894F39C8326CEF1BA9D7D5
-:1043B00010FD3CDE9CC676C5CB2BEFBE8AF8E7BA73
-:1043C000EF5FCEF0EEE51BF5DE11D585317CA3DE87
-:1043D000CB74DDCB375ABD7FBEF944F0452FDF8863
-:1043E000BAAF100CF597E718FBF7F20D8D8F7CF143
-:1043F00070959DDB3F7DF25E03DFFCE1A97B8D7C48
-:10440000F32DE49B0472BF789A46DFE7986FFE3184
-:104410004DE3C7F3C437E9D3B473B55F9E6F864DE0
-:104420002B391F7CF3B8E96CF866585FBE993CEDF8
-:104430002CF8A6DD1DE67375EDF3CC09FF0E487769
-:10444000A5C0FB8C0581EA0EB26B14714FDF4C697D
-:104450004EB6CF437C26D15DD1A83F853E7FF99AE9
-:10446000DEEF33583FFB353C6E2684929DB454D02A
-:10447000CDAB8D22EE3B5372CE5C4A7A97BE23A021
-:104480002BE3E698B8DF65A8F765B20BA1D3948952
-:10449000F3DC83EABD43A62D07EB46F3F861B6CF04
-:1044A000F2B53C80532A14DF3329E2EF5BE8DFC525
-:1044B000CC9B63BC4776C829EC261C2085FC18776A
-:1044C00099F87B2757EAF4D3AB7FD10EC1F5750F6E
-:1044D000B7319DDCA35C36609CA8CFF96A5F306180
-:1044E0007EF2C0349320464559342D93E4CBF664D4
-:1044F0003A2FF1B8047C4E6741F0E75712DFB95408
-:10450000216FDA57FD89D292B067E6D78D7A5A8D3E
-:1045100018F5B41A31EA69ADDEAFBC81F78D7A5A6D
-:10452000ABF7EA69ADDEABA7B57A54DE440C7A7A14
-:10453000F55391ED6A4CFBCB54AF3CB59EEE9A76A9
-:104540007EF4F490F3ACA7779C3B79F3F0F99137C4
-:10455000AF9F95BCC9E92B6FFEFB6CE48D6B5B973D
-:104560004AE99945FDF0C137353D73A042F9158DF3
-:104570000F65A717AF89A7AFAEBA456BE9EFC77C48
-:10458000EA15FE5F7FEFBB1A7EF17A4B8C1FAE7F80
-:1045900097E06A789C9FDFB8ED20C7634FB95EBA99
-:1045A0000834B3AF5E45BBC8C1F4EB35734EFC6C49
-:1045B000D7D13E4FF05BD9B4C5CC4F7FD7E28FF156
-:1045C000F66F579DCDCCF3950939DD9F3DD4DFBC07
-:1045D000DD95B2E1FB0C7DFE78FA45FAFC37C9297E
-:1045E000A4470BDDFF7DBC1BF8EF51FDE7B12DBFEC
-:1045F00056E40B4A2F7A283470A6745AACE133C1C2
-:10460000BE732E2E399FFB3E67FC597C36FBEE9A1B
-:10461000067A5C3B7EDF95E777DFE7CC7FA8BFF8C3
-:104620002CE4D24B95BDFBE6EF5232B47DDFF3AF05
-:104630002BDEA5B8C63DFFBEEAE714D7B8EBF38280
-:104640009D14D7D0EF8F4B83E88FAC7F1F8970719B
-:10465000F9C5772519F362BE2F02F6EFA3DF9F900D
-:10466000BDE1EB6DFF7F727F1CD9274712C4197B18
-:10467000DB6DC6B89E5E4EA53FAA85F4D56EDAC442
-:10468000F1887BD0AF6A42BC75CD13F18876B45304
-:1046900058EECC2B1AD03EDAD3A870DCA9BDD1CF0E
-:1046A000E59D8DB55CEE79755905C95DDFAB4B585D
-:1046B000EFF9BCFEAB7F8C407257BDE7A4E7777A79
-:1046C00074FB44D82F6964BF60BDE3E9B61DB1FE39
-:1046D000CD90E939AC0FF4785547568CDD23C7F8F7
-:1046E00051582772E9F5A3A83E2AD6AEC9613F6AA0
-:1046F0002FD93558BFFFE91C835DA3CFB3D10C8BF5
-:10470000C9AED9B8DB5C9BC8AEA9A84CEC47619D8B
-:10471000F3200E9783BFFF97B4BFF315E59781EDA4
-:104720009AB4E9E7D78FFAE5C5E726FED0CBC79A5A
-:104730003DF323457956932B5F527E6C3153FCF841
-:104740004CE5C758921F8506F9F1F6D9C88F8A4AF9
-:10475000B7212EFAB2AC0E9A4876FA6E3334C99A63
-:10476000FEF5907E05FEFB77DFAA92D8CFB9C70B86
-:10477000FC77FC66490B5E207AD8BBC4CCDFBBDF7C
-:10478000A7887322F7CF13E7AA7EBCB2A89E3E2764
-:10479000DA9472ED86248A6B575A80FACD922A39C0
-:1047A000CE7D5FADB073729C9D97D0FE5FAEB200C0
-:1047B000D1D5A9E2DC146EE778B57E9E4ADAC67ED2
-:1047C00087EBEB16379D5B8D8F5F3BCBFECCDFCD50
-:1047D00083F4127FDF7DAAF8F599C6ADEDD37BFF98
-:1047E000CEC0D9C6AD991F2FBF38E75AFE0E218E15
-:1047F0003E9FB958E64A7F7A2C9E9FBBEA66A54544
-:10480000063817E524FB29E6BE58A725CC7454A129
-:10481000D9514EB29F8AA374D155573AE0FDB329BE
-:104820000D4FBC1E9B174AB174F278290D4FF2F35D
-:10483000CD747E81F665F1B25C7DB81AE57382F1C4
-:104840009E6C0C1E22B8FCB2B1E110C5A9A759BAE2
-:1048500025FABBADFB1A55AE3FDED8CAE59EC60EA3
-:10486000EEB7B9712B97773586F8F99D8D0F717D6D
-:10487000436327D71FCE13F34CB584789C693D382A
-:104880007E0C3F547C80F3C4E0B93CA21ADAA7BC8A
-:10489000D96A682FE9EE30D433FD5B0DFD07D5866C
-:1048A0000CED072A025F9D9E49E71A1E32F473162B
-:1048B000761AEAA7EB2F9CEB7EAB53522DFF447E7A
-:1048C0001D11407A423A4B6F9055CE9B2F167C3982
-:1048D000A4C11BA6FA76978DF95BA74B3EBB6C1261
-:1048E000EB37C5DC47DBE5B2B1BC68CE14F194E62A
-:1048F000EF88FAF66C715E724C8DC88F340F17E733
-:1049000030F53CFC7697C89B9DF0897B3446144675
-:10491000F8928C11DADF7D73568AFC991BDC9C9F20
-:104920006F6E04ED3BC508E73B32C0EC15F7A82BD2
-:1049300032FFDD240B849A70BEE642B77A23C99910
-:1049400060AAD7ECE53F211B32531E91C4132761A7
-:104950003A35BDA3E5E593FE087CEEA0173E9F889F
-:10496000EF121A7AF87EA6210D3D9C8FDBFE7D7139
-:104970008F4D3C5CBBBEFF19DFABB4E33B9F6513BF
-:1049800053EFE83DB7D363F82E6DFBE254BE6F6181
-:1049900047431E9FA3D8B1587C772C83D8EFF625C8
-:1049A000363E87B1A3C16C263979628925A4C33B01
-:1049B000A49F5BA1FF158041BEE8DF73DEA59DEFDC
-:1049C000E9D0BEBFBA433B6FD5AE9D976DD3CE5BEA
-:1049D000B56AE765D7D2F91E3BE919859FEF68589C
-:1049E00021CEF70C07ED7CCF270C670BC299E2387C
-:1049F0003BACB0CF3409E80F1732FCE2BF971D542F
-:104A00009B1C77CECA78EE2A2DEE5E2197D778EEE2
-:104A10002AA5605CDC392BE3B92B7B96F1DC95D5BC
-:104A20005D6D3C271A4BA70854D3AA2D4D4407BDF2
-:104A30007FCF911E0EE6BF17C7FB53280F85FBCA19
-:104A4000AA15743948FBFE259DCE85E493FC0F33EF
-:104A5000BC5D44AFF9746E44E57A92F6FD9B7EBE70
-:104A6000A43F3A3ADBFBFEA5D589EFFBD7CF1FBCAD
-:104A7000A1D94F0BA62BAF4F2F89CEA74E57DE8C57
-:104A8000ADEB657FF2E0FF9789CBFF0532DED6778D
-:104A900000800000000000001F8B080000000000E4
-:104AA000000BB555CF6B134114FE36BB69923669C6
-:104AB0001649B5211536C668031122A6A59588D3D7
-:104AC0001A24875AA2F4E0C1430E39F9E3EE6D537C
-:104AD000158A92D218C173840A160AEDA17F40AAE2
-:104AE000C1736AAB281609B5F42CA87829C437B36A
-:104AF000D9264D36B5170792973733EFCDFBBEF762
-:104B000023CF41CB0F4462EC9AAC0123895AC549AB
-:104B10003214072B4581E92A4937ED2F1A526532A5
-:104B200029808BD98434F574AAA62864A7B6D9A5A0
-:104B30000FECECE2DE18B71BE05211F2DCAE13F022
-:104B4000016B49A9F42C08CC6DD0791CF83D269551
-:104B500010E4C1EDD7EBA3C21490F917EBF79F0453
-:104B600066F84F7AAF7FDC379021FF0B3A503ECF8B
-:104B7000EFDCF172DD9D284C6A144764AB0A85FCBA
-:104B80008D54A19E00C7F78381F6674F5F97157A12
-:104B900077691E3845FB73F65AF22EDD5B1B77A84A
-:104BA0008F62DCCF94FD019D4F0764C85C4FDB77BB
-:104BB0006A142A2448F533C44F4231745A75FADC1A
-:104BC000448B4E714F737DB8A97BF743132AC5F50B
-:104BD000703BB852196EDA852814BE7F89797C7BC8
-:104BE0007DB41141A42E3771D4F9BADA29FFE8DA7D
-:104BF0004AC5CE71C2C6F98A6FD94A417AA7FF6306
-:104C0000B197E393AB69B946F64812EA71C2B99518
-:104C1000F6E2087FDF387F0E605B770A59D55521B1
-:104C2000D7F44121F7744DC85D7D58C81D3D2664F9
-:104C30004D1F1312C8897C3A2488F7DEE8A9CD6499
-:104C4000B8FB7B1129778BE71DAF14BCE6791E8A70
-:104C50000BBB8E7B25F2D3C217D1258AA1E279390D
-:104C6000C1ED5FA46C70907D31A1F9D3D14EFBE210
-:104C70008D492F2CF64D99D76F6F3EB1773F77F75F
-:104C800020B36A61FFB851C74041C41148D8C0EB96
-:104C9000D7EF844BA5FBF97597A8EB50CC597271EF
-:104CA0007C7937BE9B38A87E16EE1704FEA54545D5
-:104CB000A59A3AF0EB89513C2D7515606F0779DEA6
-:104CC000F257CA836992C58BEF3F9F25BBDC868C68
-:104CD000303AE37ACA241197892BA0AC4AAA45DE60
-:104CE000BBE1BAD7B0C790CF980B6DFCB7DF37F3F5
-:104CF000CE112AA38D16A595EDCD2C30DA67CB9277
-:104D0000E0C13504D1DF3D60658EF718F101978968
-:104D1000E7F24826E76EC6D32D4F661C7D8DFAF369
-:104D200067355786E7E11F75E8B61BF92A646DA958
-:104D300092451CCB8D3957601F9CBC1F11B58EC38B
-:104D4000136BAF53239E7985FCF3BC31F26FC1F72F
-:104D500057CEB751CF5F646A81E2944DE33DE421C1
-:104D60006E183DE59940291714751E2BD3F92FD6DF
-:104D70001313EEDBE643C7FBACA58ECE74CE9D7558
-:104D8000E636E64D18613E6F7E0ECD78CB16F96D96
-:104D9000F689C1A339773A79D40C9C590327A2D656
-:104DA000FDDCCCD76C63A823231FAE9B4F47D54DAA
-:104DB00037FEDBEB603E9BF696E9FF01EF5C9276F7
-:104DC00081F371B8FFBAF1D6CED3DE7FE6A9FDBC80
-:104DD0006ACE9563E23CEE3D53FF0BC81D4E69F071
-:104DE00007000000000000001F8B0800000000000A
-:104DF000000BFB51CFC0F0030977F3A0F2BFA3F182
-:104E000057F1A3F2CBB851F99E68FC2634FDE7D1E7
-:104E1000E4591820B4033BAA38B15888838141165D
-:104E200088353850C5F3A1E656012DE805E265AC9A
-:104E300084CD7A27C5C0F05F9681E12890AE06E266
-:104E40004B4036931C0303AF34038307104703F131
-:104E50003B190686A940FA25106F9086E8E3048A7C
-:104E60009D9421CFFD6D42E4E91BC5D4C1B7955097
-:104E7000F993B51918AEE93030A8E941F8E791E4A3
-:104E80009D806253B421EC70550686BDBA0C0C8728
-:104E900095B09B1B0194DF07948FD0C36FBF831124
-:104EA0002A7F8B352AFF8B212AFF9A272ABFC11B15
-:104EB000955FE103A10157D509D0D8030000000098
-:104EC00000000000000000001F8B08000000000030
-:104ED000000BCD7D0B7815D5B5F09AC79933E799BE
-:104EE0004972028710601283440D3884F0147512E1
-:104EF00082C6368503A2E6B7B61EA955449023D2D2
-:104F00009AF6573379125E6D406FE5F779A0DA5261
-:104F1000AB357AB1F5B66A9340BD784B21526B6DD3
-:104F20004BDBA05EB55EB5D18ADA5E947FAFB56724
-:104F30009299C34988B5FD6CBCBD9B3DB367EFB585
-:104F4000D75E6BEDF5DAFB285002FA2480E3F877A0
-:104F50002EC0E92200CC1C2AA373A04CAE04D8209A
-:104F6000048D70312B3F94EABBC2EC1D58F1A55360
-:104F700087BEBB04046AFFB3E2F6783F7BDF31F9FA
-:104F80005B712867ED2708D4DE69E79457820450E7
-:104F90000050DAB95C4DB07E368C6B56B17D87BE61
-:104FA000AD1ED878474B159070BCE2ECDFB73702E6
-:104FB000744F01381736AB2531567F4E323642B624
-:104FC000718A691CA7EE8F8BD05D06F4779CFD6F0C
-:104FD000C3CD4948B071DB267FAB1EE156BAAF01A5
-:104FE0003D02F0957149D0D9F3E920D2BC9439162D
-:104FF00098ACAEEA56DC9A7AE2381D889772ECB526
-:1050000033BE3432F47C898317868F0CBC00CC030A
-:10501000D0A0A2DBC27A00E8FBCC7E4D7B7C2D3E8B
-:10502000BAF14F9C3F1F7F1AE88407503BE389C8C1
-:10503000103C1B7C03DD12C3B7550CC6FDAC490EFA
-:105040001BA7CAD54FE67883F3943B3DEB3F15E1B0
-:105050002CA07908B2ABBF4C7866D9ED66B19963E4
-:10506000E9CC2B673E1FE764FD7F06515C80ED3B7A
-:10507000E356C4458FB2E5C17BD06EAF99DE76C3EF
-:10508000E12784F89989F8B1E2488F0E1D4B61BD84
-:10509000A996CDA7C082012997C8C6843100F9F826
-:1050A0002FF689ACE95548AF634CD696BD1F1BB3AC
-:1050B0009A24F67CDCFCB420B332027769AF84001A
-:1050C000A1293D4E1F599CEEBB6674F433BA3D0ACC
-:1050D00091CE8DAC6C9159BF88B7C391F4FD0CA4EF
-:1050E000A6B353F7F6B37AC492A1B992C6253EBCD3
-:1050F000513ADDD8C8487AA34DFF1D8D2A95ED8D14
-:105100001A74FB015A1BE354DE1EBAE5BBD87F8339
-:10511000E5D7FCAC94BB6E7818EB2D00091C2F1260
-:10512000E3FD83AC6AF76B580713F11E29E5E5B37D
-:10513000881706E7B71826112F3FB6F1A44337F1B9
-:105140006B8BB13407B2E0D32943655E3E0BE84177
-:10515000F6E550DD1FCFF3D47D5AA1A73D4011E104
-:105160008DEA4C54AC10B83C8AC87D60209C0C5F22
-:1051700059E5822D572469FA40379B5F78B662EC77
-:10518000649F6E11BCFC354EE0F4512EA854C660ED
-:1051900060CF71C48B21A637B2B182D34BBABA6348
-:1051A00038A6624C66EB18F4A5B5BC2CFC0595F24C
-:1051B0001BFD0EDC259F3E7E24A92795C832EEBB41
-:1051C000F6FA9D7BECA08AFCAF4E1713E97284D7E8
-:1051D0004AB0C9C3665D1671DE9F1EDC23AFD711CE
-:1051E0009B9FDB41A5F632AE57E5D07A75186CBDB2
-:1051F000907F2AF97A75C8963A9AF57A00C0839713
-:10520000D0205EBA385ECA3F65BCB4F4D627B2CCB3
-:10521000A3DD5E4F190CA38CF0A0E808E7E6264E4C
-:10522000B716A3DB6CF277383C483987E3C9F21331
-:10523000F17EB1C0C75960F38983A70D86589B0ED4
-:10524000239E3A6B516E6D2E1545944B9F169E1CF6
-:10525000B8360EC295E670957DBA7049A1EEFA6C2B
-:10526000FCD89EC18F9B106E4E77B59CEEC44F95B7
-:10527000EE1CB802C80F7C9D137C9DE57F89756E7E
-:105280001F5CE7245FE7F8A7B3CECE7E0EAA518F4E
-:10529000EBB642637CC8E0B856B2942B707F0D0920
-:1052A00070BFC1E800E11FC7F4CC70F3F3BA0E7011
-:1052B0009B10E0FA8674594ED205EF0A99E92C1535
-:1052C000F87CF3A9C911E60169DF40BF0327E3DFDA
-:1052D00086C34DEBF7BAE0BC5988C408CED9301B61
-:1052E000E17C27BC34A71B86EFEFF546B549F601F4
-:1052F000BCDF68ADDFEB3BF1FDB512A4B2E99777F7
-:10530000DA7201D42E85E67F13E3C1E98887536BF7
-:1053100020CAD623DC3C06E70161F6722EEB675704
-:10532000A04976E177B8F90CE2D5F98EA93BFEBC2D
-:1053300013BF1FEEBBBF09C97B0586DFB698588334
-:1053400070A9A590C635F0EF5AD25D08C3C3DB162D
-:10535000FBC7C03BECBAD9EDDE0937B733D30B5AE4
-:105360007CC63E9DD1496B816834C3101C0EBD388C
-:10537000EBE2E071B4EBF2C741FADA7C1E909E09D1
-:10538000BA34FD93D3D53EA4AB33FEF974F5CABF4E
-:105390002E5DBD2E14FCEBD295D220E92F333BA31A
-:1053A0005836B99CD4965BB4FE3836934B52E7F42A
-:1053B0006E94971067F6191F064456573493EBBD49
-:1053C0006000EAAF6AA9574EFA8ABC72325E6F7605
-:1053D0003BFD6ED4715C85C645F308C795C3D01DEF
-:1053E00088625DA17E909C8F9FC2F00477D696F074
-:1053F000EF0CFC6EB8F9C8F81D1B0FD58FE3C5F88C
-:10540000DDE7731259ECDEA1F97BC7892F4BE42449
-:1054100022A36F0F61597FC585F7E1BF93E115079F
-:105420002F8CFECBD04F5230847F73D7F5E4BF086A
-:105430008068905D57D46EE1DBF5F8FFE6E2BECF01
-:10544000F97A7D518586FA16B0FD069F5BC2570139
-:10545000EB7F1374E25B673C299C00A21BBBDDC998
-:10546000D6FF46E4A72CFC7D99C8F58DF76F49FD62
-:1054700019ED416BA3A0DFCFF07AA0F1037889F199
-:10548000E5F2EED314F47B5C2E8EA176CBE7172BDE
-:105490000B5CFD2C076E1702F4CB4B22EE719BB810
-:1054A0001EDA25F5E2BC5F9C23A571FF7B71CE5F00
-:1054B000483F7FD194D288E4173B2ECC1949EE1C8B
-:1054C00068E4F6ACD3EE8029D1FE7E40EE0F67D3C0
-:1054D000E387C64FD3F88BE748DE7D5AEE9771FD20
-:1054E000DFBF197CA83F1F685485972633E317E771
-:1054F000C9E868F99C6205FD0E279BD705B61FCC4D
-:10550000C1AF33CFD6B048F36C0D5793DFAA557BAC
-:1055100087ECC7A3EC39CA83E1E075FC56ADDAD25B
-:10552000ACF850225CDF527CC9ECF6A63D5FA79E2A
-:10553000E9CFFAA4F0B565C0D71EE67A56BB9CCC7D
-:105540006E4F65C0A3C4448F9C885DD625E03E376E
-:10555000168C67A614131A0FA1FF64822D7BC61E3A
-:10556000FE4DD3D50CDE0357844D218EF5DF091394
-:10557000199C5AA1043E56FFB7656B7B7E8FFEBD1A
-:10558000FA10481A836BD96D4D8C5C61FCCDF7091C
-:1055900058DE8A76210A5EEBCB4DE8B76AC54EE746
-:1055A00001DC257EBE0AFD6A327039C0A49C2E8FB4
-:1055B000417F0C9033663879C0FE84E3FEA1EF860C
-:1055C000C353C4964F344F924F4B47964FEB78FFDF
-:1055D00016FB0FE5CBF8A1F1E8FB712B14CF3A8E47
-:1055E000CD78DF6BD3A11F96FC53C729848A00EACC
-:1055F00023913A514B637BE8CA45BF536C950CDD50
-:105600008C6E0A2B3B059F7E72BC333957CBFDC491
-:10561000A6E0E6AB5FDB7268E2D79F1304F4F31AEF
-:105620004C859F8EF586E9D9F8E1DF901EFDAEFA34
-:10563000B26A01DBB5327A2A4539B64C243BF7D63B
-:10564000BAA5B9EEEFDF131DFBD8597FD0E5595845
-:10565000E7EB2FD7896660DADFBFFEF2C75CFF8217
-:10566000758A872F3EEEBA88686B149C7CFD3FE9F3
-:1056700038CEBA9DC81F4DF6BA9506509E6CABCD7C
-:105680002EBF865FB70A01F7B7581D98E92CDFF9DE
-:1056900025C123679D528514186C9DA5E724D24F20
-:1056A000A4B1B3EA77C0F0E34A3125C35EB3FBB3DC
-:1056B000CC3DA56CFD3F07CE5F9F8C72A62E2EC100
-:1056C00046669F41A5EF65B73F84ADF0509DE1FE72
-:1056D000CDAFEDD97B37FA97E6FAC95F9AF9BE0EDE
-:1056E000EB2E7AA891B8FFB4F7B15F9F2AB0710E84
-:1056F0001A7EDDCF1EED17FA5E213F6F9544FB2F1A
-:10570000C2A7CEC2EF81949183A664D6B0F67D95F0
-:1057100002ED9B7E78F68BFF97BE0F517CA36FFE48
-:105720004BDF388B7DFFB9B37DC8391C13F83D932F
-:1057300095807ACCB1FE6F9CC5DAEF3F3B7F44FD8C
-:10574000AA0EE7EBA293C54F78EB9722BDB1F5E81F
-:10575000FDFDAB7577B2F10E424EC28FE51C0EDF38
-:1057600041840FE9BEFFB7AFA01E78C014C8FF7414
-:1057700070CE2F63687F579902E9878BE60B697FAC
-:1057800096792E9A7FFDA489ACBF8411D202ECFDDC
-:10579000FEAAB7379FC5E05DFC1FD2162CDF7A5CEE
-:1057A0002A48960F0FAFF37CB1E97D3EA80743D29C
-:1057B00042BC83C6E310BE981177D3EBA0DE22274C
-:1057C000CC6CFEB59512F7370A9A41FA9C1C56002C
-:1057D000E7315CFB2B87A1DF1C18E896100E47DF32
-:1057E0003E76A1BE64EA897028722289E3489A0253
-:1057F0003B71DFCEBD5877CFFF66079EB849F028D2
-:105800001A8747910D339B7FE9AB363C4E3F009D95
-:105810005417E203D01F1E82AF2D90A8473F8595F5
-:10582000CBFD85AD11AFFFEF519B8EBF6D97AD3EA8
-:10583000C81A470168A6FEABC7CC51B1FF96395CC8
-:10584000EFD0C1207F782BB31361043D6EB3AD77E9
-:105850006CC478861FE31A9A1DD788737D24FC28B0
-:10586000F9C58E968B64C70CD74FC4F0EA43A132BA
-:10587000AFDDE2E82B013D2FC3EFE3F5F3F8C6C837
-:10588000A2A34721BD9E0CFE41BDCE6EB75E4EA9C0
-:105890005A563CA547D4DFFE79F8E3DF877C5D5A92
-:1058A00036B8FE517873E82AB37F255F49A5294EA3
-:1058B0009788BBE9FFD7365D29F96A0AFD9FA00EDC
-:1058C000F73EC8BF0FB3F718BF082774D42B25E0E5
-:1058D000712015F9C0859F3FDBF45F2F8B363FA603
-:1058E00028EE29E829F2D3A9458C7F8413BF73CA17
-:1058F0003FD8E3AEFFF08617883F0A54E20F4167B6
-:10590000FC93651C4B325F9758FB5592F93F58FA50
-:105910003E9292D9F8E44F128FE7AA75095D2DA146
-:105920003822D91F9970F8653EFE950EFC568AE222
-:1059300092A385FFBD51C2EF8CC3E017E59904BF68
-:1059400084E570F00B363C79A037C928D7742E5FF8
-:105950000196E86EBD64B9DD6F9E2D9F00AE8FBBD2
-:10596000F5C02FD8FD8C763E9A3CBAF92C1F9A4F81
-:10597000913D9F0923CD67BCCCD763B9CCF73BB52C
-:1059800026A1C7D9BAE40E4357F364BEDED70DAEE5
-:10599000CBF51F8BAE4E1BE53C9C71D83C66CA9C78
-:1059A000AE668D348F4A1B9E4E09E6BE8C7AF12975
-:1059B0008E7F67A9675D6EB0C7EFF43BEBB2D6B3DD
-:1059C0002ED7D8F818ED7C168C723E370CADCB6212
-:1059D0007B5D1223CDC7D5FE227BFE17DBEDC9EE22
-:1059E000B8419ED28C768625252E95670E8DC7DA16
-:1059F0007D5E2E186AF7E796779BAC30B5BB9CDAD4
-:105A0000D5F2FD8FB54BBAFB032BD28CFE8036B49A
-:105A100015981D53D23AB7DAEEFF2AFAAE6EB0FFF0
-:105A2000ABDDFDFB5BA1D9EEFF5A7CDEB4E023A722
-:105A3000DD2A2FBCA73BED52D84EA81984E37A7714
-:105A4000BB797221CDEB8438C328FD3FBE58B20329
-:105A5000E3FA7910E9C4BC8E7639752FC6FD2D4B5B
-:105A600086FB317FC06F08E8538BCE497D17DBE59D
-:105A70005A7E8DF23FAA530F63DD1221D15249F9AC
-:105A800003941FD020AB9ADFC07C0B03B6B3BA16C9
-:105A900093D39897D326242DDC177F2E2537CB243C
-:105AA0005FB5CB9AB0FF7C9DEBE9D04FFB9603D757
-:105AB000D6D01729DF2197C185FEA7B60CB86E0F87
-:105AC0004DECC1FDF6D60285F464666095A17CB903
-:105AD000510A1AD85F4FC15709DE6D4D3C9F61DBFB
-:105AE000E7BE4AF0DE2600C5696FF3F17C86AD3E65
-:105AF000556BD6B0BFE8B82F53FE438EE6AFB4E186
-:105B000040F83E5B42F0E5835675A540E2AB07EDF9
-:105B1000DBB6390AE9CBDB621555D4DF1C95F4D42A
-:105B2000DB12154DA477CC09924F3E3F6C90DD1AE5
-:105B30009DAD8085F598D1847A66645610735E2099
-:105B4000BF083099002253208D751F747696B232AB
-:105B5000DAC1EC927CEC6F295C8976EF1C8677B415
-:105B6000232CF310DA2561B0FFA4FD26CEDB375ECF
-:105B700002C9185ADF68E7E0F723DA5DD1F428DBC1
-:105B8000758FAE5DA483D9FD3346D1AE7394EDD24B
-:105B9000A36CD7CDDB9DD4DF61707B4F65FFA1DDAA
-:105BA00016C8B067516FF7C4F332DE67C6DF32CB79
-:105BB000CCF8C76BB237AE76B2EF9DB8C7C9E68BEB
-:105BC0004E894138A593B777F4CDE1DE2B8517C711
-:105BD0004DF67DDBB84BE324D7C65DC6CB09F6F3A3
-:105BE00009F576FD52BB7E59BD9945BE17F8F83EC2
-:105BF0005486FE9011D6211FB8FEF80A83FDB880A6
-:105C0000C94A23FB4F32F5DE4C79A7CA5635F2EB71
-:105C1000B604CFEFF02333221F1601F9357D90EA49
-:105C20002C4539016674E19821FEF1994F9BC8CF4C
-:105C300007C64920CCA1F531C87F9E41279974E160
-:105C4000CFF0E77C523A99EAF3C6C9FE5174A274C8
-:105C500048A3E21FA57394EDD2A36CD73DBA76FE9C
-:105C60000E6174ED3A47D92E3DCA76DDBC5DFB5C12
-:105C700085EFE7F058B359CAE09EA77AEAEDF382C0
-:105C8000DEF767853DF5F53315DAFF9DBA7F96EAB5
-:105C9000A9AF6772DEF37E7698EAEBDB7E5ACDB66B
-:105CA000B251F3C97FFF9D7C52A69EC42F3D47CCC5
-:105CB000B0DB32F84AD503F87DBEAC03E64BE5C74E
-:105CC000F83EC5CAAC7EB9BB6DFE4FCB1A95DB64FE
-:105CD0003D80F6E3BFFA3C1B7D1C5E67BE2783D781
-:105CE00091BFAF4AB6BE355C9E470DCFC3942148E5
-:105CF0007998A53566B5C9E492FC0C8F7B65F67B77
-:105D000099927CD8E7B2F7652DC9E379767F1714AD
-:105D1000C8A497C84CAEA1DEA340A2B698E28622E2
-:105D2000F9FBE4F049F68D2297DC2A19016E3B6FEE
-:105D3000955EE90055AFF1718306907C8D403F1967
-:105D4000D339A8F59C827A9A2E007D6F08DC7F3EBD
-:105D50005F4379160BFCA3FBBD8CFA15CCAD703CF0
-:105D6000F431FA95FBC9DFF90FEFF724F006309F05
-:105D7000F70C0A21C4DCF9BCBE788A1EC2B1E3C7A5
-:105D8000A559C03FA1BF24C5D365D1207F281446A3
-:105D9000C92E6B8BAD55DDEBFA575F89378EA6B5F3
-:105DA0005F2F445959B4CAEC1F81CE3FC42018FA62
-:105DB000478AAE34FB47D84F07E397189FCFC207F7
-:105DC000ED4A328DFABB3531CCED7939457EC6F5D9
-:105DD000425EC5C64A17FD1629DD0857D8302DB4D6
-:105DE000F7D6E78B06EAA9326CEE13A6B1EFA43A18
-:105DF0002399458F18FA5E7EDD3D9F3CC5BB4FB6AB
-:105E00009C84DE9DF8E470EF7D8A91CCE60F9DAC1A
-:105E100070BBD617CCFEFEEB62758932F344BCE151
-:105E20007680DFADCF850EE14C4E3E94DF50F4F42A
-:105E30000B8887B682F3E223CD17346F9EE555A217
-:105E400079A65230221C33B2C131DAFC0F8014B370
-:105E5000D186E225A81F096330AFC3F933A015ED41
-:105E60000B667F60DC23586EC07DAC1E5FA026648D
-:105E7000A62F6DA9DC09E8AFF631FD89EC13693E68
-:105E8000D79FCAB83E64B2FF701ED1F923EBD5523A
-:105E9000467DB1E2D59B5B1A1F078CC73BF03B7E6A
-:105EA000BCCC79CD13AB2F520AB2E16374F6F0ADDE
-:105EB0008C5E9872075B1B552ABFD9A851B9A531D2
-:105EC0004EE5A64646ECE81F6D2CA3FABFE1A7738A
-:105ED00091CF531DC50C7F1DF1FB5EB812D02E056E
-:105EE000DB4FF08505A82F6FC43AE901CC0CC4FA4A
-:105EF00004FEFE7A65D102B4F337069CF6D50B504A
-:105F0000AF1EAA5FD45285EF6D3F43877239B5BF8C
-:105F10007502D8E7184CF522D7BE77B7E2A379E02F
-:105F2000DEC2BF3FB705FB0BC84E3D45F00CD63176
-:105F3000E08A7595D77BDBAFA7FE4904B0F1FEABD5
-:105F40007DED02F42FDC3A99FBF961D9D293E0910F
-:105F5000FBF53FC2A02FD2E5B23CCA5F5118DD94D9
-:105F6000B047B7E6DA708FB21F90937CBF7B2EFBF1
-:105F70007E39C43727D9D76C384ECE0FA6ED874867
-:105F80008285E3FE8AF3C53F7BDC5B7D1F0F2FEA32
-:105F9000FCA489DD476BBBBA71A9E729C91F22DDC3
-:105FA000E7D4F4D1B6A2C4BBB9DE30CAF1B72A9A9D
-:105FB0001D8F4A92DDE4E0DBD13FFE94B19EBE9896
-:105FC00049F9478130E7C3D1C2FD071F3FC7E3F45A
-:105FD000030F568C1B49CF8AD589A88C0DCA8DBC5E
-:105FE0009AA0A7AECDCF43236DB01EAD2CF4D4C381
-:105FF000E5259EBA4F3BDDF3FDDFBB5EBFB4F54543
-:10600000A7FDBE8CFA9399F31C65BF4EBDA77F8197
-:1060100058C6D6E1F9F912C5439F9FFFD26D3318D8
-:106020003D3E6FE2EEC9ECDAFA161FC633FA980A63
-:106030005289FB7052B2FDEA3001F1F92BFC171BBB
-:10604000EF97F6FEF7AC7DEE876DBC13F09CD4B3F2
-:106050000BDF2FC2F57BD607B65CEA24B97070B0AF
-:10606000CEE5C2C100AF9FE9DFDE8272A04FE075CE
-:10607000D1BF7D01F73B6E6E3F9FE92F8BF19F6C87
-:10608000FC65F305339D657F0BFB15271F32EC671D
-:1060900078326B4C5F01E6BDE9407AAB1F12A49FDA
-:1060A00035805525A2DEC3E88FE2DDB236211B7DA7
-:1060B0001C6CE4F9027EB890F4FE65F3A7FBD0A84F
-:1060C000F727DE96D14FBA3821F8C0D69B35177C1A
-:1060D000A2299848DF89F9FE9DA83F2764461259F6
-:1060E000F691C5A6DFB35F196C2C84BF4FB0F914CD
-:1060F000B409EEB893E1E7764FBC7464BBC181DBB1
-:10610000A95F38FFEDBDF9E86FAC158CC9D8ADAA11
-:106110004DF862C4DD6FC8891347B0DFE7EBBFC439
-:10612000FD1A8C2ED0AFFACC91AB7D149F5D96EF0B
-:10613000E1BF6575DEFCB6A535214FFDE2F923E729
-:10614000D741D29F21D72CFBFCA548F278E361818F
-:10615000E443CEC48134E667C2F312703DD0F1C38C
-:10616000CE233F6C74FC808EF9A2F0C79076BF4BB3
-:106170008EB666E021B37CC2CFF55B39AF96E2DC28
-:10618000EF1F1174F4A70A790D5370BEB26236E3A3
-:10619000B8ADC5621AE3DF37966C5371BD37947E94
-:1061A0003C7DD017E3717FDDD22A90FD87FB2E6DF9
-:1061B000F2BCB6CCE7D7FA79DCA1CD5AAA9522D3A6
-:1061C000ECD5AA70FE8122C87ABE94D1FFB57EF2CA
-:1061D000BB5BC0E3EC09D2AF4BD5E5947F2B178EA8
-:1061E0001CB7CDC49B6CC70333DB3D68D363E99C0C
-:1061F0009DD4EFFBA78DDCAF83970F0C11FA102E07
-:10620000A657607B15D87C18FE3795F1FCDBD6F2DB
-:106210004709CF9259457AAD4F4B99D86E53F972D1
-:10622000A2CB36D6269F0D9D5BD345E733377DC87D
-:10623000E3140FFAF7B6A05EB1A9E71AC07CCA60F2
-:106240003C0D283F364DBD4A453C6CDAC1788BF495
-:10625000992E72CE856CBF78488334B3A840D6BBE4
-:10626000BA512EC8B56098EC556FBC1A70DD365522
-:1062700072D6CC4FA79A3004B4297EC8C4F8446BB8
-:106280003D50BE4BB0CCAC2D46F8C789240E7448A7
-:106290007660BDB54EA6F9B46B1C2F68871D77F2EA
-:1062A000BD302FA694DB61A5E8EF67E32837F3F94B
-:1062B000EBDB4BC96FB42957A9473967DAF611D31D
-:1062C000532CF4F3B7366859D77DB3987CC0EF925E
-:1062D000EFB296A0FCA64CFCBCEF83CFE0BC5BA762
-:1062E0008BB0338BDEF1233FB74BD2C6D2C52559D5
-:1062F000C679C2AF7BF611FD0385E01DAEFD503BB4
-:1063000099FCFB68805CC0E65150CBFDA690717E85
-:10631000350649B273C782D584FCE89C5B1D5F9348
-:10632000F84D9295526419E5D50D778ED5C9E75C85
-:106330003E07EC3FFD92DFB1F95EB3CF0788B7733C
-:106340008FDDFB34E64D39F606DB979E7E92BDBFAE
-:1063500092A96558BFE6F05405F3809E2F9430470C
-:1063600006F9278A74F826889487F6261C8ACE7048
-:10637000D1F9FFD8FB0E4A5694232DB97C5E72B832
-:10638000BD4F8AE27ACB56BF93C747F60FCF6787D8
-:10639000307BAE52165213C9BF0E9E37E4E4497EDD
-:1063A000B9D39B4774F5766FFD2A583A06F9E6AAE9
-:1063B000DB7C9066FD5EE3CEFF62E3FFD2CFF58328
-:1063C000AB21D58EFBCF7A5BFF5BFDA3A90AD2F58B
-:1063D0003533B4623C7FE1CCE32FF6BABFCEF8543C
-:1063E00077F1FFCA589AF29233E7F7E6EE05DD49F6
-:1063F000567F499753DCDEF6CE73BDAF6F11E67D55
-:10640000595B7C8EDEE0C9775CB9ABCAC4BC31860F
-:106410003D3DDFFB3DC1FFA50EEF7C4F868FCCF9E4
-:106420003BFAE070F3517665D72382AA376FAA450D
-:10643000E57147B34586C039279E8BB6AA5374AE23
-:10644000D96AF66B2D318A53521CB081110EC6F9F0
-:1064500066A83ACF730F4C4C039D3F48CDC673E1FD
-:106460009FB4DF392AE7C37F74BF670FD3EF6AB5E4
-:106470005F41FE5C2377D60A2543E702023ECB1C30
-:10648000CFF0ED7F7C49F778F0B4EB1865BB7D78F1
-:10649000F47914ED6AC511FA7BCBDEB7FEF3C16F58
-:1064A0002BB87FBFF9C0914528E7AEFD89042A6B60
-:1064B000F7D68311E8A67D27ADA03C5EB95BA2F5B7
-:1064C00007B97BD6859E3CFB169AFFB50F47687FC0
-:1064D00058F9A83F5DC7BE5FF9C397A601E3DBB7D4
-:1064E0009A079E1E8FF87B40E0F90C56FFB40BD93B
-:1064F000F395325C9E2D1F21A972BE7AE33F42F5CF
-:10650000B8BF0BBB7ABE48FD765DE2F3BBE4EF2576
-:10651000AACF6947FAA3F53D213D59E0F065CBCFFD
-:106520007BE37B3CFEB4F2715F1AF31557EEDAA100
-:106530002459BB35BBDE26FA5EF0F04351C4C39A42
-:10654000C7BD7ADAB50F7FD83EAF92CE390DD4A150
-:10655000FC938E51FDA8A90E70CD9FFB67AE238ED4
-:1065600065EDFEFDD5F37EC7DEBF1E9720C044CA91
-:10657000EB7DFFADFC04EBC9708A8932D6BFEF45D5
-:10658000371FAED9F5129D37D24418283A0BCF41A8
-:1065900064BCCF680F30A0A03C5CD3B5E16D94978C
-:1065A0006B76BFF95BA4BB3520BFE8E6E7D7F11FE8
-:1065B000E34E8C6B75A85E3FCE51D83F0BED16D8DD
-:1065C000959FD55E74E25A0E7F5FFBD0D17B508FD2
-:1065D00078E3D1FFB907EF6558F5D15FEEC1FC56FE
-:1065E000782AA0A1DC5AF3C0AFA2E0C2FFB76DF9D0
-:1065F000F0D6F7BEFB9D3B181EDEFA8D9FB0F6D697
-:1066000093AF4EC4FB39DE7AE4AF6350FF58F7E432
-:10661000C2B14867EB1E5B3076A4F39F48B769BFF1
-:106620007B7DD3FC5E83C705DC04D9866B9719EBB1
-:1066300002FB0714D47BDF136060632E7BDEF5A1C1
-:1066400082FACBD3260C209EF6EC7EE9E9AFB3FAB2
-:106650009B6C9DFC59D689CD7FBC48FB1B631F56A4
-:106660005EB7FBC2C5675762E933B0FB353040FB0C
-:10667000C609EBFB1C5BDFCAA1F5CD7C7F148E291C
-:1066800088FF350FB2F59C86EBCAD673DA89EBF931
-:1066900026FE63EE89EBD9AB7AFDAF4761D5BD77B6
-:1066A000E0CBDDF959ED5B673D573F76D1887AB98C
-:1066B000231F4E86673AD7CBE0FA866A1E520B90AC
-:1066C0002EBEFF9D3B627C9DEB1862DE7AE8E844BB
-:1066D0003CB4F19A6FE08B88878127FD1AEA512B31
-:1066E0009FFC35F1DD5B8F3D4BE779D85F5460FB54
-:1066F000DD5B30F8770858FD3A815756EB03E7FD2C
-:1067000096F5BB9A756119B47EE7FDB612D74F1D99
-:10671000A0F5482FA9D551FEA60B68DED7A5397F75
-:106720005C97EE59867EED4CBC87034E5EE1D0BA95
-:1067300062BCF9BADD47CE43FA1B6E3D9DF96B385A
-:10674000FFD9ECFD7D5EFE1D965FEDF57D6BC7FB11
-:106750000AEA57DD3F513491D9ED6FF9069442DCD6
-:106760006F1E91343C679CB9EE43F86FCE7ADE38E9
-:10677000B3CCA40F25903D8EEDE0E964FC7EF2F9E8
-:106780007D3CFCBD6BEF9799787CE358F6FDA02427
-:10679000C0EDB9EBA0B31655CCCCFDCC07296B7C72
-:1067A000F110BCED5D12C9F9377649148FCB9417FF
-:1067B000D70D639F19CE388FF74C43B9F646EF7F5C
-:1067C000D874C9E9FEBA078F2896BD3FA45DF85D6D
-:1067D000339CDFDBEE6FCD13D9FB5BF3E0DB59FBC2
-:1067E0007B5D362F41F85FEFF3517ED2EB5D525661
-:1067F0003BB734E0F3E85DED91592FE460DC201AFB
-:10680000A4FCAB9666F3D7E82FB50EF96C3F80F188
-:106810001AE65DB5448274BEBD257A15DD93E4F4B5
-:10682000D79A8127399E20FB498E252A792C2CED79
-:10683000896FF91841B8E106D92A42BDFF40F1AB92
-:1068400032F68B7E15DD65D71F94A10DFD2A074D0D
-:10685000C168822CFE8D8CFE13F325D0DD7EC2EE46
-:1068600071E2BBEC7BFF73521A51DB00A96E3A1F39
-:1068700050045DF767E9EFAE469DECE7E2C4E5E45E
-:10688000FFF1A75226EA6B45EBB412511F7EDC09DB
-:10689000296F1CBB9051FEBB38CE3E1FE983B0EB85
-:1068A00081071E18C3B714D4CB9FC692C9BF7357B4
-:1068B000E84558BFCB9E37E3013ABF38C14AC828E4
-:1068C000E784D812F2832D4C25E4E5AEF55C18136D
-:1068D0000A713F4D0F73FFD30F037CFF6C6ABA98A8
-:1068E000F2D9EFBC5924BABE33707E11F2D9DEDC86
-:1068F000D961CC57EC593D6BFF1406E7F8B004683A
-:1069000072EE098FEC4FBAC7F62FECB4EF1DBACF79
-:10691000CE33FF8E8DB75D8D65543ED068D0FB07BA
-:106920001BE750BDABB196CA471B13F43CFAF560A8
-:1069300012E97377633D3D1F0F6F0BB8FE3F6C4C40
-:1069400052FDDB815C827FD24D2026D9F385888F72
-:10695000F0D0BC1D78D2B6DDFDC30D4FB5A21F62CD
-:10696000108F19F83E17FA0415FD573141C775BF4E
-:1069700031C0E549267E27FA07048CCF35DCC4F305
-:1069800022EE11BCE71EBE65CBFF476D3E7D3B9AF4
-:106990007C30C0E07CA7765919E943A09523DDDC63
-:1069A00023240E1AC58467CFF9939579C947032E1E
-:1069B000BA99D8C1EDFADB035C3EE9EB40447A9B1F
-:1069C00090021DE9CD99776F955E8472B15710687A
-:1069D000BD91DECA5CF4E6F4776780EBC110CFBEF0
-:1069E0008F0FD12FE7FFF8BCB2AD358897B522F9EC
-:1069F0002D5BF095EBBBBFDAF364768B68213DAF7E
-:106A000010C99F3BE9F0116122834FD7BE1F403F61
-:106A1000747C22D8FEA6AE00D2D79D2BB87FF1EEB3
-:106A2000C3FC3CD3D175254BA6B0F68B187E30281D
-:106A3000957741698E3B7EEA9C63B85B4DE46823A1
-:106A4000F8B732F3DF6E9F74CB07396C9CF1874344
-:106A50003AFAD7B74E7AAA4761F5C27E81FC4985DA
-:106A6000E1D4145CCFAA3F7C6F5CBF6B1DEE589DD8
-:106A70009A847A63FBA41F08C80785C77E2AE03E74
-:106A800032494BBE1228C0FC70FB7CB09C9A8D76BC
-:106A9000C1A57989D770DD1245E9FF83F474B47616
-:106AA000DD7F62FF4E3CB2A141CF9DE2920F99E79C
-:106AB0002AEE4A8DECCF74E67F17CE7F8476CEFC2B
-:106AC0009DF53B5A1B5B857231139F99FDE65DB0C6
-:106AD0006CC4F1EFB2EF0F63F357822EFA2C4AF534
-:106AE000CBF89DF3FD70F1D7CCF90EFA894619AFBA
-:106AF000EDF2413ED2C523FF3BF1DF0F02924E4241
-:106B000042FF544F20190F16E0BD7129AA33E948FE
-:106B100079ED67E472FEBD63CC77C611DFC9E96227
-:106B2000CAFF18E5786D904854E13E678846B67D07
-:106B3000A03CC8E5E77C48917F540CDD3472BCBFB3
-:106B4000C81BEFDF0C3409B0BA553BFE01B286FE1C
-:106B5000B07D5081FEC7BC2087BF4AE6F6E58C7D3C
-:106B6000FA0E89FBADA4251117FE6CBF9D8F77CD62
-:106B7000E0BE09341DCF7F4DEF115CFCFA7E287911
-:106B800036E24989EB744ED6174B925F72A1141608
-:106B9000C99FDBC9E57F0324D4D3785C0670DE3A55
-:106BA000C445DCEFEF5AC7CF8DEB5A88E0BE2BA669
-:106BB00053BDC1D6531EB1F5FA876CB9FF7D5BEEAC
-:106BC0007FCF96FBA55DA9056106D7776DF97FBFDD
-:106BD0002DFF77A2FC67E569F7F5C3F72A491E1B6D
-:106BE000985FF08D6DF16644C13D8D26BD7FA27129
-:106BF00005957B7EFF7C7588C177DF73DC1F7CDFAA
-:106C0000E1319FC1F859DA140D81B5BFCBCA131F0A
-:106C100067F51DEBC49D28577EDC98A2EF76A8DDB2
-:106C200012EA314799B56C2119BC66B68458FBC885
-:106C3000BB035A2D2B77B41E0AE0BCF33E2702DEBD
-:106C4000D3E7F051F40F5FED8EA21C9B290691ADA6
-:106C5000F20ABAD553D04E5F27523FDFFCD565EA22
-:106C600002C07B1B5E84D5ECFB095784293FA2E858
-:106C7000FA97CDD5ACDD9697C394AF5DB1AFBFFBAE
-:106C800021F67ED68A08D5CBBBFACD2DAC5EFA06AE
-:106C9000AF4FB0BCFC71FAAE7EF321F67D712A4A8B
-:106CA000EF67EEEE6BC2F9FA2ABDE7AF72FED031A4
-:106CB0006E0B836F22187B826C3D1E1352BD01F454
-:106CC0005B2CE1E73C0AD2C92ADC3AC66EEFEAA1A6
-:106CD000D07F0754235EE3BF7D217E0D2BB7E147B4
-:106CE0008C2E66EFE5F8B8BBF5C50BCE67EDF6ACBC
-:106CF0005B4BE715FCEBD6717D88E10DE5FF84AFBA
-:106D0000EC15AE76C989A25639ABFF6E5BD04FFC4D
-:106D1000D1B66E59620A07776F18F5BE52EEB72CDE
-:106D20006EABF1E439397192BF09C96D41D23F7937
-:106D3000BC44D652F47C06E37DF4B3C28D22D797CF
-:106D4000127D01B73F46FF0ABF9F2D138E9D4199CB
-:106D50009F77B46A5EDBCFE6B765A62207108E295F
-:106D6000F6FD2C763CD269CFC6DFE9966FB2C6E15C
-:106D70009AC00C2505E15ED537EE21D6CF072967ED
-:106D80003F3383B89FFD68AB48FBDFE64A7E2E7039
-:106D90008FF14E37DE73E1F0559B21121F6FEB83AD
-:106DA000349EB3D85659927B1AD2510C77719AAF50
-:106DB0008A782EED93C1CECFE945FFB81FFDE38C55
-:106DC0009E4A0F878E88E407F4E683175B5E7A108D
-:106DD0001BBCE7F02630E5C79DBFCC2C9F213AA312
-:106DE0007DB6A617EF51388AF728A007C532A355FC
-:106DF00063C874E2CA917493847EF8D28C73077767
-:106E0000D8FC7E8F7DAE108E5D0F28BFEEB0F38B69
-:106E1000EE5825067586979F598768FF9CD0D05DF0
-:106E2000458199C33C8FC2C9B7F6DFA435E33E5B09
-:106E30009CF2E60D5566E45D977EC2BCEBC341AFA4
-:106E40007FAAF7C74103EFC34B3F2719A8D77EE3BB
-:106E5000EB33480E5A2BB9FE925E917707C697F234
-:106E60000530F0B9D3AF63C7BE13CC23BE49CF659D
-:106E7000EF7398FC88745DB002D70B72B4E6189E6D
-:106E80008FBE117E80FDAFE0EB5F550474BF4E51A5
-:106E90000C28CECFCA8DA7227FAF1331360EC76D17
-:106EA000790F6ADF33F83CF73322DD9F53DC6A9DAC
-:106EB00086F3EC9D575888F4B139CCCFC1B4083C67
-:106EC0009FCB2AE0FCB023D24DF9A15B6A4568C68E
-:106ED0007563B833B09FE5C19D94D782F0CE24BAD4
-:106EE00023FD0B6315C88FD61541BEFF1CB34E435F
-:106EF000FF7234D4DFB587F5135EAF183B512E56C1
-:106F000079EFA99B1CE2FA5E20C4F73FC62F8110DF
-:106F1000C6F93703E531B2B9107F33BEB280F60748
-:106F20008DEC2B27CE1FEDBD402C9ECACB1217FF38
-:106F3000EEB4E56DDACE5FB8C7DE471CBDE30E7B6D
-:106F40001FD96CEF1FC5E6E26605E976054C473CA4
-:106F500095AEEA129667E1FF533ABC7235935F260D
-:106F600065F24BCA7B6E75FC8A12CFFB8871BAE75B
-:106F70003D856470DDD93E8E785E1F289750FF9B5B
-:106F80000109D32D5786D303F282E634C4DF68F5B6
-:106F900092682891423D34530F3FCB5E972F0412E5
-:106FA00073B1BFE8BC7ACAE75915489C45FDCB6967
-:106FB00001E5E97CFC2E96155E4A061B05BC351FD3
-:106FC000075E900D3ADF75A3E4DC67EB3DDF051942
-:106FD000F7D766DE4F7BCEFFDE44F7D3B6094CE130
-:106FE000C37A8E7D3FAD9FDF4FDB16E1F6579B8F57
-:106FF000E7AD5D67E3E1F210BFEF75954DA7E7845C
-:10700000B2DF7FE4F8BF52281BB0DDD8ECF78EA1C9
-:107010006685FD9D333EFBFB5448E1DF4F1A799CAA
-:10702000B5380EEB6766D05C1D2A18C2D38C90B9B8
-:10703000C65DBF2164E715C909D22F4D99EF877A44
-:10704000D05CE76EE794791754D2F9BEA3F6F93E07
-:10705000F6DD7681F02A69A3C1BB6307B409FA564D
-:107060009283BF62FA5F96F5783F18B5C49CA1B8C9
-:1070700094A327ED0A71BB97D1DB06A20F266110FE
-:10708000EE30E85BF15E88F1780FB78EF6E7E17BD2
-:10709000BE8DF2F6ECBE5AD4A356FF58A2FBED4EBD
-:1070A000C0D72A4677AEBC14E779E107E3C91E9E34
-:1070B00020256F0FB9F6E9C215030AD23BC25FC3A0
-:1070C000E1E7F9D442FA346E1700C573DAAE897B72
-:1070D000F20B33ED923CBCF780E48A42FA5D265C09
-:1070E0008E5DE1D433CF271CB0E908FFF431784F2F
-:1070F0003870A5563625E4AF9990A47236E854321C
-:10710000FBA50BD793F19F8E703687269E85F3F8EB
-:1071100027E2EDA950C1BF1EDE1C3A2E4E9E3B4811
-:10712000C7D9EEBFBE3D142579DB7038B2D34FFB13
-:10713000C9D788AE2546D7A8F73A79330D60E7D589
-:1071400087A10BFD94C5C9463A277A94D131F62B15
-:1071500069FC5CAB0C5A02E337528CF3874F2ED399
-:10716000440DE3B3961FF51EAB040C94B5E8977479
-:10717000C35B194EBEEAA6BF1B0F6F2579FB854086
-:10718000F275C4EF8DA5961F353B971C7EC32D87E6
-:107190000508EBC87FE71CE3FB65555297911E1667
-:1071A000304E47BC2F8424D5CF078BCA0B204DE52A
-:1071B00067F18A23D2E3EC730CDD9788EE730C83BE
-:1071C000E7E12A9DBC0E1EAF2AB0E9106C7BF56783
-:1071D000F54B9B16B2F1D9E29B1897FA563DCFEBCF
-:1071E000F1CF96E93C6B41FF1575182F82655C0F56
-:1071F00073F221F2EABC7ADA09F75D1DFED361FC75
-:107200002EF3DC9CA3AF65EE5B4E99A9AFE58587B5
-:10721000892F0CB3EF64C6171AF09FDC8EB5EDEB27
-:10722000448EFBDEF8CCF240E340EB5E57DEF941E2
-:10723000BCEF28EB3EC0E3BED1DE3FD52DABA4FBB7
-:10724000E50C4C9DEC6BEC3EE7E5C943F670627EC5
-:10725000EECFD02F9DA8C9AD407B7251FCBDD6BDED
-:10726000F9004BCC9E735E76CDB34F63D066D113DD
-:1072700006C7337D7F73EFBF6FE0B903F44FD8E3E8
-:1072800045EC38D97AD1F213BFDA7EB8778BB8BD26
-:10729000EED8F9D9E6DB4AF8EA0F233D0C37DF2FA9
-:1072A00085F97E3AA6DEA0FBF25BECFBF25B2638AA
-:1072B000795C8686FAE45561EE8F5D1F2EA5386BEA
-:1072C0004BCF5CF22B17ECF7915F7DCCB2A460B989
-:1072D000F645CCBF473FEC37997EA753BE7D19D505
-:1072E0007BAB66A9682FDC10A9A0B8EDC646C39396
-:1072F00037E2942DECFBA4CBCFD792A8D630EEDBAF
-:107300005A57A1A2DD217DAE92EAF269159DD58C76
-:107310009FBFB079DA7905189F28E7F7935DCEEA29
-:107320004DA500D561BECF1E305E0E239EAAC3BA06
-:10733000433FB48EBE6549D3877221AE5563CE8C70
-:10734000F31C6CFA62CF49BF7E43495E13C67EECE4
-:107350007BB2D62BA9B2B5E5784E9E091CF417ABCB
-:10736000DC5F8874D03A6308EEB5367EE7D9E33245
-:1073700081243EE25A3F25CED76FBD082BB2ADCF58
-:107380004D61AEDFB46AA636221D69F2DF3CF78795
-:1073900056C678BE7E8CD1918B9F4FA477CE4F95E9
-:1073A000E1442BCECFAA86B214CD3F4CF287BE93D8
-:1073B00086EEB18C87CD0E6CF78B5C3B4FBA88E7BD
-:1073C00043B3E7ED3924FF5224DF1D7D70BDCCF5BA
-:1073D000B9D1EA837917AC237DF01DC65A649F7D2D
-:1073E0006E1DC9ED753E5543FBB477BE4C71ADE8DB
-:1073F0002970B9DB6E91225C1F9422DCFF8DBF9354
-:10740000909EC2F51E3CE7110D4137EE0303137841
-:107410009EE97AD8517B0AC1375973EF675513B883
-:107420009F614B757085DBDF303797C7CDF6E65629
-:10743000FD29CCCAF270BA1A59F30C0DFA31AF0615
-:10744000AAF97932A1889F27F381A1727EADD1F08C
-:10745000DE500192741E6DD8F503EFFDA20FC8E94E
-:10746000E620E22DC6EF59896C1728794FEA32BB26
-:10747000F14C4F73EED21F8709DF0903F9BB675642
-:1074800090ECBDF77A14B23FDFBB067ED785755FFF
-:107490000E586CA99E12C5DF3DCCE63BC0987527FF
-:1074A000E68169FCFDF4CD02F9B39EFA5B703CD233
-:1074B000BB1105117FCF6211D32778B22084304EE3
-:1074C0001B5D00DDE7E2F73D61C29F2FFEF3735EB7
-:1074D0009E41FB4F489C83E7B7C43B71FE8FC6219A
-:1074E0000FBF9FF1D76A094A86F4A1AD5AF210C2C4
-:1074F0003B1BAC153DECFB2D0AE7AF2D794A1AE397
-:1075000095150522E921E00BA527B3F78BF6BD5CA5
-:1075100083F99D8BE64CC796383EADF7242D79183C
-:10752000E9AF465B5293CBDA573EA793FC3D2F7EE3
-:10753000FD5EACCF3ACCEB3E3FD7E3518F719F134A
-:1075400058F4C1449AD7AB61AECFB6C6CD3E5318FE
-:1075500091AF32EEE5F59E3370E8806DEB3AE6A729
-:10756000D3BF75A28BA44F1CF23FC11CC33E8FE258
-:10757000D083297C1C7AD88D3C89F217F3CE6243E4
-:107580007967EB6DFD6DB4796799FC9477814CEB6D
-:10759000F00ED3B7300FFD443EB99EEEFFCCE4278A
-:1075A00007CE8D95793194C30EDF68B36F22B9ECA5
-:1075B000BF42A1FB4C1D3E72F86756CE201F7D13C3
-:1075C000E5C5B2B0BE90A76A98E0E6930B4FC257EC
-:1075D0008B60606F8CD517C960E530117460EE6BFD
-:1075E000A5135D7C9289CF45F30578D1230779DD1A
-:1075F000856F6DF01EE02C76F270EB7248D6DB6280
-:107600002E3E6DB7CF99758806E07ED49CBBDC8892
-:10761000CCC47B277357213F6C121229E487C8EC36
-:1076200037425731BCBF37866991E83FD4973F4C0A
-:10763000FCFE4288ECB22DB356527CEABD6B9293AD
-:10764000707FD9C0F0FE22EDE7E9B122E5DCF68FCC
-:10765000E5F9137A9C97C9387F0EF6FBB45D37EDD8
-:1076600076FDD48EADAF476EEE8B723ED817E5FB3C
-:10767000D406A553457A1828563577DEF2B9F6FDBB
-:10768000C2D746ECFC97632D3AC629AE8D08F67931
-:10769000BB2ED25736343E4E657E5D1A304F2E5883
-:1076A00066E9A857A81F2D10709F85D379DC1D9F10
-:1076B00037B9F4B58B6CB9ADE2BD406CDE6AB3A5E9
-:1076C000BBEF9D554521EB7D41FF15E5FE5FB519EB
-:1076D000E8BDDAFBFF283F21BFD410BE8CF5E64E93
-:1076E000FADD9840377F1E2B35852B5DFDC6EABA43
-:1076F0003CFBA32AF6CB640F358066A17127F7D730
-:10770000A0DFAD6369B013F39633E908FF5E74D16F
-:1077100083FAD185A417C121AE97D694A844BF6D32
-:107720000DCA0EF4EBBD1BABA63CF5161B6F99F30F
-:10773000C1F83AD3F4C84F66F9799CDD9AC2E3ECFC
-:1077400058C7383B961867C712E3ECF81EE3EC58AD
-:10775000FF41A349758CB7631DE3ED58C7383BD68D
-:1077600031BE8EE5E38D2BA8C4F809BE7FA2B1819E
-:10777000EAE7DA7213CAF8EF7C757C4D31313FEAE3
-:1077800027F6FAEC3197AEF825FA01216AE07E1D62
-:10779000D8DFFCC27FD975BAFF3A5E928F7E4988E6
-:1077A0008980F184F6F836A6630ECD2F20DF0A3AE1
-:1077B000C5D5AD1598D7B83372E03C99E90FA5F15E
-:1077C000EBABF3587D57E4B976CC233D556FAADF78
-:1077D000E1AAEB918A958F6843F549E53BE4207B6C
-:1077E000FFD096E7DB510E04625CEFFB51E437E714
-:1077F000353192E82E618A0DCAB162258D748C678D
-:10780000395F9C8CF3E07ACB67A1258E797C9374E9
-:10781000A502F98FB5EFE6743FBAF63F89E8F43C6C
-:10782000F3BB91DA8995A36A47E770876B87EF8589
-:1078300011FA698316AD8FC1BEC9C7F757AB80FB7C
-:107840007F3B7C9CEF3B02BC9C98E3E42F54DF120F
-:1078500065E52D51BEBE1D017E0FC1C054917E8FC6
-:10786000071A84CF633F5F2D040DF31F2BA696E408
-:10787000A3FE7FC8A687C993227CDFFEBF2AEDDB6B
-:10788000E74F7AA8358FD5277FDB30701FDE04469F
-:1078900010EF71B5368B944FF4FDCA53F296B0E6F3
-:1078A00067CC7C2C0FF5DE0A5BEEA46DFBA4A9ED82
-:1078B000AA49681FBCF72C977B47EC7176F8FA52FF
-:1078C000B49E33C3749E02A093F492A6B84CC10C2C
-:1078D000711C2F159F7629DD93D9A6D0BD4CCA8780
-:1078E000B355F2A77EE0B7EF25EE237D450924B519
-:1078F0005CF6BCD312C9FFD0A205296EB3295C4146
-:10790000BFCB6095CB140FDB54CEE33AA1C8C5744E
-:107910004EEB9B3D016ADF1656291F385DBE7B5F2B
-:10792000750C4B51C37D3F6D2EA5FB2A2D4DD428E0
-:10793000AF98FD8BDEAF8A919F6713D8EBB28AC7F1
-:10794000217C63F753BDE5228DFA073B7F9F542FBF
-:10795000117F2722D1E3BD7F76E0E767A21F642570
-:107960003F9F324D5BDAF3247BDF6AAA8912C60F90
-:107970006DDA3BBD21AC5F06142F0D4D7DB919E3C7
-:10798000A9AD576A06CFC7E2E721C0BEEFB8B57C04
-:1079900059CFEFB1FFFA104C36B07D8D8AFC0AAD9D
-:1079A000F034DE4F5564EB33A1DC0A01F5B1B63A91
-:1079B000BA8693C1E73D47D09AF71915E9465A941C
-:1079C00047E3B481A9627BAB4EA67DB128AC76A318
-:1079D000DFA0C8F63B38F2203FE53A4FC0FE57B86B
-:1079E0004AF69C37187BA5B75E9071DFEE9936FD9D
-:1079F00064E22D739EF9B14773119EFC557432E217
-:107A000004F86F8D552CC1798DD37A851D9564D27C
-:107A100068BA86A986A926773EC62785775A796BE4
-:107A20001FD2C3345D069DE1E54C1868C6FE37D908
-:107A3000F4DF51ECDD9F0FD9760DE3D3ABA3980FA4
-:107A4000D52082E5EA1FE31D960B9E533AF23CF5E2
-:107A5000C99D859EF653B69778DE9F963EDDF3FE70
-:107A60008C5D159EFAD4AE799EF6673E5EEDA94F09
-:107A7000EFFE8CA7FD8C7D4B3DF5997D977ADACF93
-:107A80007E61B9E7FDDCFE959EF767BDB6D6533F34
-:107A90007BE0EB9EF68E5E9FB96F5E11FDFBF47985
-:107AA000FCDD1FF7B9E24C7BE1847B743E6AD13187
-:107AB000FE07517E6FAE8CFB3BABAFFD1AB7BBD45C
-:107AC000730C1DE5CD25365DAECC33AF43F95A15A9
-:107AD00055699F90C3BC9D1C3E8FF49189DB999C96
-:107AE0009A41F6D8E0FB10CAEB46EB9C5297BF2AAE
-:107AF000A07502E68155456BE9FE40E77B593301ED
-:107B0000F3E32EC12486023C766A51BB80CEBE7759
-:107B1000CD8BD97F7495C400B30F51AF1FB4FFE470
-:107B20001C8AFB32FB8FEC4323C8ED413826D17B06
-:107B3000E39B02607C9AD977641F3E1A66F6E17473
-:107B4000B4C7FA37A11C1AF8854C7144F647F65FA2
-:107B500025B3FF36E6BAFDE0FDC558A6412B247FCC
-:107B6000B8D22D8E2D267BF036A4E72FAC7B760580
-:107B7000F63BB592DFB3D731A62E8E7A72477117D6
-:107B8000F1C940B1CCF7213951E6F6EFFDD45EEFF3
-:107B900090FA7DB243D93A905C76D66193D09FC675
-:107BA000FB0CADAF05C9DF3DF18FFE43C86F6A899D
-:107BB0003A1EF3008D3D8A89E3DD6AE3B9449B5E9A
-:107BC0008D3FF3581A5FD28BE5A93AD347585956DF
-:107BD000B6B517CB47A22534DEE9C623D52863D432
-:107BE00073B8DF5A9EA6A49B05F4373338B2D81D6C
-:107BF00083FE89E8767E8EBF547E05E90FB5FEE3ED
-:107C00006C0A55792AC58D0348170295444F0139EE
-:107C100044FB4B000FA3627D8E90C65017EAAF98CD
-:107C2000175A95B79DE8C0D16B51DF4D72FBF8A78D
-:107C300088D7589D77FD43EA0F084FADF6EFBC7526
-:107C4000E4EAFBABD9B81D052579E8B3457FCA1234
-:107C500097FCD963EFBBF7E6881EF9331B731466F4
-:107C60000EE9458C1FB68BA720BC098AAF07F64BDF
-:107C700064CF076EEAA4DF570D68960EA4FF5B3A47
-:107C8000F65B53524FFEBFBFC42A480F0E343C95DB
-:107C9000156F817E09CC19C3E3337AEA1DA40FC0A6
-:107CA00098A08EFB6C432C68EEC8621F7C29C2FD35
-:107CB000671B263AFECC049D7B6D437F5B18B7366D
-:107CC000557C84F573C32F0A76BAEF87B8A180FB81
-:107CD00027871B3FC0ECCCA40BBE0DAC5F94E36DBB
-:107CE000C796D4D2FDAAB8CD54E2B9D0F21DE4A70C
-:107CF000B7EDA52FD978BD36C2F1385181053B507B
-:107D00009EE431FD88A1B4CAF6AB38FE97780E8F99
-:107D1000EB1B1648DC2FE773F62DF138DE4BA383FF
-:107D2000AECCB2AF00211598EF6BECFF7AF07CE09F
-:107D3000291DAE7D0E703FF0D6A76CF7D64F4B7B5A
-:107D4000EB4C8B7E1EF5806500DCAFB1CBFB3E0CAF
-:107D5000A60FE32885CE7DFA097E5E506510207D52
-:107D60009777A57BEE66F34B38F75E66DC9F3F7531
-:107D7000779AF497C54C7FC1F799F7BA171E5EBD85
-:107D80001AF585C28C7DB4C22791BF01FD4486CB14
-:107D90004F3449D33D7695E3EFC994EBC1C35B8182
-:107DA000BD217B3DE9C7FB51B572F42BB417DDF261
-:107DB000C7239543FE957639F5EA11F25F32FD2B24
-:107DC000C6FD1FE897BEE1175FF9F311979FF2ED2B
-:107DD00068721AFA336E9FC4BF77EE4F75CEF5BD49
-:107DE000532BFF4CD0391C49171C379659E7737534
-:107DF000254DF76738FE15C78F70699E790BF2DD48
-:107E000026E3506A0FEBB7FA377EC07E164AFBF7BF
-:107E100035A2BC9B2053BE88367BD5BD41F467E2BA
-:107E20007B56AF2ED6C7127F3CE3237FC27A9BEFEF
-:107E30009DF3A98E3FE6B3B61D707E8EA3475941D0
-:107E4000FB5C4610F5E43376B135F4EC87DC1FE8D3
-:107E5000F8FDA67679DF9F8E47BDC9EFB983F29B07
-:107E60008CB93CBF694C7DBA17D7F94C7B9D316EFC
-:107E700055356B287E3AF6B2742FEAA1D3EC3CA5B7
-:107E8000F2677E463FE50B5211E5279D3E9EDF4B94
-:107E900064EC953DE742C68040793E639E938C3406
-:107EA000EB67DA13DEF7E5E0AA17237CDE7A665C7F
-:107EB0008AA95B6F5F21E0EFA2A60494679B2F6302
-:107EC0003602ABAFC8B1F38B4E8553916E174A6142
-:107ED00003EFD15BFB2B89F214FD47A6FC1AE3A349
-:107EE000F02CCFABD44EE1F156EDE792C1242068DF
-:107EF00021983E3D3C14C7FAD67103EFD41FF48F8E
-:107F00003DC0D61DF7A10799DD5FEA433B5EA37A2A
-:107F100017B3FBB1FE28B3FBB1DCCDEC7E7CFE4396
-:107F200066F763FD7166F763F96366F7E3F3279815
-:107F3000DD8FF5BDB955E48FEFC3FB8DA6E0EFDA19
-:107F4000EEA6BCC6F5AA4F43FAC99467555537A8A3
-:107F5000CB187E378617521CA57A21CFAB6FCF592D
-:107F600048F6F4A09F2EC3CF39E4B7EB171CBF1D12
-:107F70001E718EDBF6ECA0FF3369D0FD0527EFC73D
-:107F800074FA21FFE909FDD87ED437BFF6DBEFB4E0
-:107F9000B057AB676EEB0896E0B99E147F6FE7159C
-:107FA00066FE9ED6EADD4D94E7A78C7B2E85EBBA64
-:107FB000BB324CFA06FEDE12CAED4C3BD1B10F3398
-:107FC000F571A7CCDC0F33F36022B65E72B2BC8CC5
-:107FD0002DBE14C5ADAD26265F70BF684C9FF3B2B1
-:107FE000EF44BF6DA1969771BE99E75DF9F7F17CFB
-:107FF000BC0E486AEEF93BE71FC8E62BE1FE43B72B
-:10800000DF36589AA6FB19826193F44581E991A461
-:10801000576A498A03B60FF3BBD9AFDA72A269DC9B
-:10802000C5B4DFB73FE3237DABC6CE7F6B19A75244
-:10803000BD65DCAC389D3389CC52FBB3F4B336520A
-:1080400032E2FE2AB1FD5F1F61FF97FCFCDC574B5B
-:10805000EF5C15CF47758497F7A1DDDE118F91FF97
-:10806000BF67DC2CCF3DE4527C0EDD572185B99EE5
-:108070002DC555D2B3659C7FF9507BA7DD9E1CBEF4
-:108080008F3036273F6620DC49EDFC72C2447F8B7F
-:108090003FC6F38CFD1A8F17064B4550B39CC7782B
-:1080A0002287DFE3D5519ED4D0AFD31197E95C4747
-:1080B000875E315CBC95F4A2FFCD113CF4DB62FB22
-:1080C0001D5A5628A417261A72B59A7C3A97308002
-:1080D0007CDE116E5631FEAA8CAB1CB15F45E3FD10
-:1080E000FE7FA3B2F95D0080000000001F8B080036
-:1080F00000000000000BCD7D0D6014D5B5F09D9DF6
-:10810000D99F24BBC924BB9BECE68F09241A34E019
-:1081100026240134E224048A167111D0D052D98069
-:10812000282A48405B57ABCD8604842035F853A9F4
-:1081300058BAB160ED57ADD1D296D7222F28F2FCB4
-:10814000414DD52A58D400D66A6B6D0469A9FA3E10
-:10815000BE73CE9D497626B34950FBBE872DC39D85
-:10816000B93FE79E7BFEEFB9774F9D823F1730D630
-:10817000BA27456595F05CEA88A71431168E966794
-:10818000D74F60EC1B59E1CF32FC8C393C8BE49823
-:108190009B313B636A173C4F69EDF4A75716188370
-:1081A0007AA2FCF329EF7A077FD79F62FA661681DD
-:1081B000F6AC587AAFD7C5984D61C2291B94995B2C
-:1081C0007EEF6C467F4E89F8774F20EC49DE8FC7F3
-:1081D000F58B29EF4E18DC6E7959AF4354185BBF0D
-:1081E000AD23CCA0FCA900852A843BA6E6C1BCAE89
-:1081F000DFB99245CA18DB28F5B8648063E3E7C2AB
-:10820000C270D9E0FE17E37CAAB057298670C21F5E
-:10821000DBA973E06F85298E6AC6F2F0CD687CF227
-:10822000EF30CA9E53D07F7937944B3578E0FF13F7
-:108230009E3596AB7A8CE589078C65C642F6F03898
-:10824000C65E6B864ECF646CCEA10F0EB174C6E6CF
-:10825000C642CF3CE9632C577585E33263F358E897
-:1082600099B7A09CD790C6BA4330B88D2DC57581FB
-:1082700069BE510CF035308295E52D4D65CC35D079
-:10828000FF7C3993D6A9A1B771261BCFD8F76F69A8
-:10829000650CFA89D509F1ED00FFECFA6DB3C7C0A2
-:1082A000F3FE4A5BC143D828627F17E7E782CE4ED0
-:1082B000C17C336D2B478D86FAE1A969422BD4FB33
-:1082C000FEB967AD2F8672CFF49210E21DF0F56E05
-:1082D000FF7C00FFF3C2BCBD3EFECB95C7E68E819E
-:1082E000E796CA2766E3734E627DE86FD6A4CE1682
-:1082F00007F477C932A502FB0BD71BDBE7D518CBF8
-:1083000000399F0FFCCB9B3518DEE1E0318FAFF7D2
-:10831000777FB342F8679F033D003EC3F809DA87D1
-:10832000A53E290478CEAD11D438D04D9E2AA89D03
-:1083300016FCD0AEF18319FF622C83219FD5CD139B
-:10834000E3ED5025D76527FCE7CE14E20A8C9FBBEE
-:10835000B4AFFB14942F73D9E3227CCFCAEC12F094
-:10836000FBFDCB18EB2822F0D26B13D6F77ED71A81
-:108370007B217C9F1714990DE880D58CA1F1088E84
-:10838000D1848F231C1F2EC247DEB2D0333F82F12F
-:108390002F9FE49445A87F7903FFAEC3B751023AFB
-:1083A00083EF1B81CE624467D29144FCCC39B47C0C
-:1083B00039D2E31CD3FB62A88BF3FDDBE403671423
-:1083C000025CCB858E1969004A8ABD89315C68C020
-:1083D00020D2B5CE8F3A9E96EF68217E4CE033FBDB
-:1083E00029E467FC7736A186F8EC29D72F65941B22
-:1083F000BB337BB73020E1AD328BD5E733F69FA995
-:108400007D670B50DE2E5FB66EDDF9F03DA5EFE720
-:10841000AC9C31A7F39B336624945353AFA6B24F61
-:108420001B07A610E3EBDD3F2ED1C75F650EDF060D
-:10843000956D12A12CD9E44DA1A2817659D84E1880
-:10844000A25D986D922CDAB9F57680A7B5B07EA9B9
-:10845000DABC52B5EF360D9EC4F125C49BACB8050D
-:10846000580F69BA2423BD7C5938B2879B77846D35
-:10847000B28F19DC0EC06ED1E1B759C31FC7EF89A7
-:10848000E3DB8780FFABC6C770FD39B4EFA70D1FD4
-:10849000545F9D9D7CBE08971DF595A2B86D09FDA2
-:1084A000DCB9E75F2F9C03C42BCD67A114E843B26E
-:1084B000AB7208E8BC4CBEC7859D4B99F57204F8B9
-:1084C000613D945578BFBEABC3A5C0FBB2E2BBD63D
-:1084D00021D19775A7329407E3989CF908F43B4E95
-:1084E000965837AEDAF97B6D69506617B35009F4C8
-:1084F0009BB12795E44966D1B93F1160DCCC4C971C
-:108500008AEDD332AB7FC2883E982225E023ADF6B8
-:10851000B5BA34846B360B212B4A429CD522938DFD
-:10852000051E8272E6B46DAC1ECA157FF32822F2D6
-:10853000B4C4F55D3BB6473DDDC6F6A17E096AF2DF
-:10854000679D43DE44FAE35A89A1FE481B778F807A
-:10855000F0DC0F5D89C097656559B3EBA15CB6DFB0
-:108560001652149C4F875088F30988A4B7747CEA8C
-:1085700072A4E2E36ECEF463597C3BC0DF668F7772
-:10858000A3BC8A4DBE5CDE0EF0E45E9920AFF1AF75
-:108590003EC001C2FBE2A5DBDB8B90BEA57713FBDF
-:1085A000CBF838DE8DF28CD53684B1BD6FA66490E1
-:1085B000FFA99A3C4B35E981E62C3BC9335D1F305E
-:1085C00055526498B7A0CD9B7D2F4CFAC0C9422E5E
-:1085D00007D92B0BC80E1158AF702A0DE68F151155
-:1085E000EE023E8F41EDAB797B1608B9D0CE71A675
-:1085F0003635617DF898D502C815AE4D55513F0B03
-:108600000EE60A56C0BC6D2CD20574D2223009CBBE
-:1086100003E375331CCFE94A6B43BBEB2957AB0D22
-:10862000F1D7FA2CE80F98C7ED76D6807641AB1CCF
-:10863000726541FBA866BFAD2A1F9D83E50CA0EDC6
-:108640001EB41BA4B08C74B9CA5F9CC3E07DBAB7DA
-:10865000F79B2867BF96F9AB19AE0290A37550E758
-:108660005C90FB9B1E5B17AB81F14EE63125C1CEC2
-:10867000734A4D0CED29E7C942C3FBEE6698D199C8
-:108680000365D56DABC771AECD5408AFB54C6EC3A5
-:1086900076B5800C25615D9C27834C9960D57FBEA3
-:1086A000E17D37D8498A7324FDA731A534B1FF3164
-:1086B00049FA3FC3D4BF6CD9FF40BF5E43BF6B24B0
-:1086C000467674CCE7A67537DB05AB33EB5664A270
-:1086D0003DEA644D5D1676674BA68DE0BE3DD0D475
-:1086E000A342FB3A068C0F7472C1E7474446F60C6E
-:1086F000AC14D00BCB97FAFAE97834D6E3F46B8B51
-:10870000090CE5D20592DDC0275398B16CB68B4AAF
-:1087100060AD715C9BA7B207E967953F55715AC080
-:10872000AF3F7B9AD994E212986F6A7829033EBED4
-:108730003F739F6B4D00CAE99C4E1ECEFCE30CF4C8
-:10874000177A044E7F6B7C36C24BB82EA7534CE889
-:1087500037EC60252817C348DF6E0E0F8EDFE3CF9E
-:108760007FB0DD627C10BB06FB61B62A4C294E98B7
-:10877000578F6607F78F3735AF13F9A07F3C27ABCC
-:10878000A2F144C07FE278D95F6CBCDFE3FCCA068B
-:10879000C69B3DDD38BFD90E99E6375BE35F7DBCF4
-:1087A000DFE3FC8ABEC07838BFC4F1BE669CDF6CD4
-:1087B000A74CF39B2D72FAEA1F2FFB8B8DD7D35C4E
-:1087C0004A76F0ED0E904F4027A9E53B5C6360DCF4
-:1087D000DB5D76595006DAD5D6DEE09A8BBAD73D06
-:1087E00075BA1FC6A99B069573B197A9D36B8B1950
-:1087F000DB2470BAF8EBA63FAF43BA383E73552975
-:10880000E913CDBEBE04AB823EBE44E2F0CECA77D1
-:10881000C75B12F0783FC81115E07800F85D057E5F
-:10882000DC0A7C89E57873809E0F82BD8ECF6D0057
-:108830002F7E7FA83944E5879B27D153EFA7741279
-:10884000B7DBC7D658DBED676471BF6F53509E7FAF
-:1088500025EAB5DAD410EA4536E93CA626DAD5ACE5
-:10886000E9A914F8BEF132568EBAF18CCD1C6E5FB8
-:108870007D36D9EDA9E57B7B9AA17CBB6457502F4F
-:10888000DFAEB019567E7311EA992AB457797B7618
-:108890001EF7C37CE1DEBDA8F7E6A09D0E78F5CFFC
-:1088A000EDDD8BFEDFA56097935E6687F7BE05DF83
-:1088B0005F03FFAF1DCBA29BC9509E35C74FE3C3DB
-:1088C0009FF4DA6CB4DFF99FBB671E23BF229CC202
-:1088D000F5828FCD7E660FC21B722871EA8FDD1B79
-:1088E000463E50ED4A3B8982B01DF5B41FF5347CFD
-:1088F000AF3DEC6436846F9A83E4DADCB946BF613D
-:10890000534AB78CF6CFA6721F6B81FE2F9D69FC70
-:10891000EE74727E0B9BFC8659A6324848EE778B2C
-:108920000B32D0DEBF1D5F4D1E8CB7E8A196DBF782
-:1089300026D0695E96C747718033D81928CF4EB0CC
-:10894000B23BEBF1637E16192BE6F6FF6C8EDDBEB3
-:108950001750FF32CABD2AA46F2E3706F307876768
-:10896000B256EFFEE69E29EF960CC0972BC505D4B4
-:1089700003794BE17DC27C255F5C407F87898F94C2
-:10898000A37F639EC7FDC2234166319EFECC65D2A4
-:108990007B88175C4A94E7E6F94E1E34DF9A978B82
-:1089A00099153F299BD09E9BF5AC186A5106F0A102
-:1089B000CFFF7F9AAF8E6A7A86A93ED60DF4F23247
-:1089C000D07B3BF76318DAA93ABD4205B29F2EB9B6
-:1089D00004BE235DA86A01E2F3E5D17DDBAEC27679
-:1089E000203B5AD1DFD5EDA0EE8336B483BE68BFFD
-:1089F000975CEB207B8BB17AF9BDD281FE92AD0FF3
-:108A0000F6FB5E82FEECB713F14FB526FA10C69660
-:108A10005080EC819BC13E467F3F5AFF8194CEBF80
-:108A20001F49B053F1CF9184FE5AF7FC4C5000AE71
-:108A3000CEE6AE29EFDA13E4C552D9B606EDB99603
-:108A4000B84071886EA807F6C0E8A58AAD0DF07F22
-:108A500025F683F46992EBA3DBA09F443BA566AEA9
-:108A6000FC08D0435B595D47089EEB37F378995E6D
-:108A7000BF3F6EE68B917F6E674D4C00381D29DF3E
-:108A8000FB712FCC476D9558CA1428DBB9BDC3DEE6
-:108A9000F2905C10DD4D3FC5EF8118C82D9C775DCD
-:108AA000D363588ED958B8159EF7A5F1F651C9254C
-:108AB0003B431827699B81D3CF0C46EECD02FCAD1A
-:108AC000C94E2539E878DBF320CA294766C552B478
-:108AD0007B1644BF1BC678A4EC650BC316F4B540E7
-:108AE000B31FE2593CEE72C8DE5D900970D706EB09
-:108AF000E2D8EFA0FAD1EF517F53446B3B6CA7D67D
-:108B0000CF169BB55C785CFB7EF9F2273E7808E6D1
-:108B10009356EC0E21B9AD3F87ED106C83EBEFF26D
-:108B200047BA12E1482996258A83B2AEC968CFAD0B
-:108B3000FFEC81AEC700E5599FB949CE66899EB862
-:108B4000506468BF33AB6A70FBDDFF7A3D80EBB3E6
-:108B50003B85917E65EC850BD19FDCD85F6631014A
-:108B6000E39C995A39F6F085AAA1BCF8C25A2C2385
-:108B7000ED02514EBEFBDBEB63D85EE06516FB0EEB
-:108B8000AF6FE7F573B4EF532EFAF02777A23EA844
-:108B900076901FBA51B38374F8CEF38A443FE779D5
-:108BA00087C6E3414D2EB8468EC7835678DC1D54E8
-:108BB000DFC4F729AC4B403A4EF9CC7523B6FF61C0
-:108BC000330B5F09B06F5176FCEC4E85DA1FB6C2ED
-:108BD000E35941F508B6772D3FF2933B010E8F0E16
-:108BE000C74476631238FE32D47AEEC8E6726E9EBF
-:108BF0008FEB8D2CCDDE74387A02B3E12957FEE07D
-:108C00000619E4CDDAA2AE06ABF8F309AF8DDA654A
-:108C10002689B7677839DE76E5843F4538DAE42778
-:108C20005C387EAAC0C2587FC3A45E2624F47BB6FB
-:108C30008FAF03C06DF342BBD4C94C453AF3304FFC
-:108C40009C019D792A39FC1B02AF3105DA794AE192
-:108C5000E9C6F7BDC4FFE87270A106820ECA0E8D88
-:108C60003E32EE6EBF10E9214BD4E92DAF1DE9C5B0
-:108C700061D3EBE75D84E5CE2C5E2EF7E5B5C7F258
-:108C800041CF38A00DCA855C07D93BE6F9E568F00D
-:108C9000B6FB55BFD76F814F672FADD3C6718E50CE
-:108CA0000CD6758AADA761317EBBC84DF61ABC6F74
-:108CB0008827CC7FBA4687D3BDDCDEDAF82F57434E
-:108CC000DC623D92D1E978EF69D3E978AF359D9EBA
-:108CD00083F84FA0D34F98359D565BB5073A9D68F2
-:108CE000850F735964EAE6460050FA74FAC377A216
-:108CF000B6FA7ACDE6C7E039E533B7E4853AE2194A
-:108D00008CEC449B8BCBF701B91F9986FD4B7213FA
-:108D1000BD17DD61DAAF79318BF73FA8DF89D59BCD
-:108D2000516E8DA0DF30CEDBDCEF282F8777CA4570
-:108D3000EE48DC02EF27BD12F74B7D7CFC64FC5251
-:108D4000EAE37E73527ED1E93F271C413886E397E0
-:108D50000B06F865E9C8F86507F14B5A19E797B4AF
-:108D600024FCC2624EE28FB545BC7CF3DD3EE28757
-:108D70007EFE899518F9275662E09F69F794507D29
-:108D800073FB749CB7055E625E7D1EE1669C877A0C
-:108D9000B6DC2692BDD1CB504E75B2BE3D4EE4C37B
-:108DA0001A21B41DDECE8AF5D4BB14FCDEC3668363
-:108DB000FDB14EA3FBAD080FFA43D55A3C4BEA6117
-:108DC000977A06F3B1A7B2BB349280FF020D8F975A
-:108DD000F9C277E2F89DAC772CDAA5C9D6E91E0D69
-:108DE000DE1B03EA3D56743E9CDED9897AC78F4F5D
-:108DF0000E77D667AE269403663E9F72FD6F3F786E
-:108E000068887E7EA5C1F1A8F63C0DBE7FD46BA517
-:108E1000A783EA2F4C7C5F298CB6E4FB5F59B5072A
-:108E2000BEFFB5153EBE049F3F65C5E70F7879FFCD
-:108E3000C3E159F2713C4BBE2F87E723DA3ABD7983
-:108E4000FA787E33099EFFE8F58F08CF4792C8D79E
-:108E5000A35E82C316C37D01E477F4DFD74D8CF5A2
-:108E6000E17EA8051C7F4DECC7A5F07EC0B4FF4491
-:108E7000003A9FF2E9BA50C4822FA1DDB144F8F55F
-:108E800076F77865CD8F5056A25DBDE5EB6EDA4F73
-:108E9000003DF80FEF572BE76D3E0B793CC5C6E55B
-:108EA000D065771F5E8F719A2FD17FBA55FFCF693A
-:108EB000F4359CFE2F4AD0FFD88F59DE75321E4FF5
-:108EC00069F747F27D84AFDE0B513E6DBD254B4007
-:108ED000BF2E5FED16D0FEF76BFA65A397FB337AD2
-:108EE000BBAD52B72061FD2659880986FECE18AA6F
-:108EF0003F331C00DF5884EF329F7A163EEFF1F6C5
-:108F0000DB7BA7650F5507D40A6C0F72BA12C757DF
-:108F1000CF34CA697D1EB67017EB45FD02EE77DCD3
-:108F200082AEFC9ABE847ECEA77E34795FE5D3E91B
-:108F30008AF777BAFA06E09BAEC137039F66F8CC92
-:108F400078190ECE9B104EDEDFA5897026EB4FF709
-:108F5000AFF575227D9A10D75938A0AFAFC0FE5C2F
-:108F60006B6C31E61BE05F5D5F83644AC5FEB7381A
-:108F7000781C75CBB2BB6A31DFA0F356B91C519295
-:108F8000BB94EB39655921C555AFD1FA35C3DFDF45
-:108F9000DED1357642198DBB1CC7BDA08675A3DC1A
-:108FA000C8403B81E20FB284F1852C674700E3B2F1
-:108FB000EB858E8645A8472F7493BE6581B996F1DF
-:108FC00029FDA9C79FF479B340E530F55BA8BE9CA5
-:108FD000D6D18476D288EB3B3B2CEDAAEF6B76158D
-:108FE000CC6FFD90780DF828BEA5E377F0387CFDB6
-:108FF0006AC34D02E23BB50C8604964C0D77D066F1
-:10900000ABAD38CE7AD17E2A057AA1FE5EB38CFB59
-:109010000DF4B75687EB01A4C72F0B975E2FF97895
-:10902000BC1EEE9F51BCC3CDE5167D80F2B167BD7D
-:1090300096FB07FAF3F666599540FF1C93950C8C46
-:1090400017DEAEE941C642814B3DFFFE7A03F3884D
-:10905000F378A7A97E9471BA670117D97718864F5C
-:10906000A49B577DDC1F6DCF0E3FCBE56328847436
-:109070000DE5E711FFCC05650F95F75359EE2FBFAE
-:1090800044F503BC3E93E511E119DAFD81DA49FDAF
-:10909000FDBC41FDBAFBC73D48DF7DFDE53FD2F792
-:1090A0007C5E7FA4E324AC2B9F7F8F48F3FF445268
-:1090B00033707FF4B2E8628A13CD8F5E43CF75CDF3
-:1090C000722DC6E35E6AEE6B6B83E765F317CB68C0
-:1090D000F7CF5F7237EDDFEBFD5F827E05F2BB22DB
-:1090E000CD20BBA8C816DEE61EE0B70138DAB43CD6
-:1090F000B3DE7AA42397CAFADACBA1FDA48FDBDA18
-:109100000C794E1D943F93A2489F26C6D57539F819
-:10911000A143FD94E63F723A36CD97B1BD30FE27AC
-:10912000EEE2788CE8BA4EB6E2177DDEC9FAD7E7F0
-:109130009D4CCEE8F8D3DFAF2FAE9079FE4FDC80A8
-:109140009794927ACAF7B944D0E0F4B8347EE3F544
-:1091500066C1384F94117D2848BFB3343FCEAC1759
-:10916000F4713F74448AFCD80EDEDC5A6181DF1151
-:10917000E2ED40F3D270BD1DE571570AEDDF339982
-:10918000E2FC7ABD8624F33FDFCFF50873AA349F53
-:109190000DB765C4D1EED8D0F82B19832B69E33E07
-:1091A000A98AE153E83BB108E5CB6D1ECAC76868E0
-:1091B0003C51D592D0FFC2A7FFC385F1DE8671ABCB
-:1091C000FD187759C8A44F12F31DCCE33644AF27DE
-:1091D000BA8DB5080D56FED61BD99CAF17628A8C86
-:1091E00048FD1D49DC476E542A1C189F688C19F7EE
-:1091F0007340433A903E16AF33BF4FD8CF11B17F83
-:1092000046F38EE1661EEABD3536A2B72D8037F4EF
-:10921000030B415DE2F38DEC2C8D1F7B089FFF6EED
-:1092200078DEC896F9BE9B8BC5D2B206E82627D257
-:10923000C1503F792A05DADFF479F4FC882ED25345
-:10924000F7B8F532E82DC07FB84CB3738AF9771BB5
-:1092500096D1FF49EBD96B033E5E73EF531705C6FA
-:10926000427F6591804DA6F2F3921FED2F5E66B1AD
-:10927000A79EDF4BF6AC7C961002FE6FDBFDFCB3C5
-:1092800005E4CF6BF6D8EEE7C91ED3CB8C753398C7
-:109290004F676A7F597505A03CBABF1CC3F256CD13
-:1092A0008E5F73EFEEE7DBC83E09C7FC097AB29622
-:1092B000F1F8F257AD1F3B035776603E51ACD846EC
-:1092C000FE5EAA891F1FF13BA85E514EE42EE2C745
-:1092D0005BFB248C373882AFF9500E8C2A3EA68E69
-:1092E00006FA1F55C3D36458291FB7B37815D90D93
-:1092F0009DDABAC0FF56A3DE1B589F1ED3FAF0F5C5
-:109300000857F6D0FA78CA7A68BD6C58A6B81FDF3D
-:109310008FBFB892DB1BB293EF2B6CF7737ED8E153
-:10932000E7FEED0E3FF74F338AEFA2F84ECA0C1B53
-:10933000D5CFD09E6639BEC32F69F29CE3637730E8
-:10934000D2E54FB05BE17DB8B412E59B2F0BF75926
-:109350006B8BA51B919E7FACF9A7B04E77D23A15C7
-:10936000F952237CDD7EE3F75BAC5BE9C8D6EDF513
-:10937000E608C9AB64EB76D97C316C15777B5EC3AC
-:10938000C3470D7FFA014E67B9ABCF81FB30EB8B42
-:109390003719F2AA5D3B6677632EB49E57BD3A2D0E
-:1093A000BD06E5B679DCD73FFF2F1FE277E6BF9C0D
-:1093B00096F2F1634D3EBED6DC40ED608115299BEF
-:1093C000E400E3792FFD7962C229274DEF75CC4384
-:1093D000BB82589FB1B9E1C3B45FBD282032DC1F06
-:1093E0005FC88C79652CAAE705F33CD8D725704D6A
-:1093F0000185AFC78410608A354AB375B962C80F5A
-:109400009B3777F63EDC875FACEDC3837C317C5FB6
-:1094100062CA1BBBBCA1315CAF7D3F4E7FC7094F09
-:1094200073156E37CE75BB49BFCE0BCF0FD727EC68
-:10943000C7BDF1DFA2651EFAF9D93A5EC2E1FA9220
-:10944000C1785914161CB2323C7ECCF8A89538BEAF
-:109450001A357C99F163C6C3E2B9B369FDCDF37FD8
-:10946000DD1526FCBC0EF8C17C61333E188B5C8C8C
-:1094700074FBC67C91A17D3C5D9C69C73C81C5B3F2
-:109480000586F9454B58289DE707ABB3A625C06B69
-:10949000C6A3195F8B9F64A16EE877F1BD1E5ABF0A
-:1094A0005734FC88DD7FA77985615EED7C5E477867
-:1094B000FEAA4CF3BA542D7FC607DF236D206D152D
-:1094C0002B3DC2E7B308E6D32E0FD62727584D13FE
-:1094D000D2C91253DE82193E33FC33510E4E1EBCEC
-:1094E0008F5F91ADEDE38F67216D1F3F838E3584D4
-:1094F000FC43E62D0CF039A7AF85D1D9FDE361BF60
-:10950000028BF49765C0EFCCE7BC1BE7C1BF5705E2
-:109510004405F30467CF1FB306E71F66E18CEE2214
-:10952000B4F7FBEC28472E6560C642BB0B6092A8DF
-:109530006FC3F52954D6FB3DD6F1B19DF47884353F
-:109540006DA7FD772563EEB8E4F26555C041E39958
-:10955000ED9499E52519282FCCF8D0F1340FF1922C
-:109560004678197F3A7879017515FAB318478375EB
-:10957000ECBB86B107CB07F68F59BECAEDC96C4666
-:10958000FBFFD764676A764713C51D16687AE190BA
-:109590009D353CEEE6FBC81509F2F11BC1DA6BB252
-:1095A00013EC547D1FD9CD7A097F57B8DCDDE27802
-:1095B000A2BB0FFBE983E4979EAF19A17C4D3163F9
-:1095C000994271B1B4F4F12C03EC62C6E70D7ECC84
-:1095D0008DD97E7C5F18472360E6733F59374F195A
-:1095E00058B7F5576EEF40799CB2E49731EA5CE1E9
-:1095F000F91C69DABAD56AEBD66F4797C2FB04FC4F
-:109600001EEBD0ECB0522D8E8F7FA07CAC588D0F0E
-:10961000E5BFEAEB98520AFE87218FB083F0ADAF29
-:109620002738117DC89791804439C336E622FF3828
-:109630007233CFC758C894AD981FB4306A3F96D8DC
-:109640004F2428111C91F5295ADC2444FD2C0AF2E0
-:109650007E5829F7F3FAE93E06ED13F21F6D2E301E
-:1096600025B17D260BA1FF04FD65A3BE67EB12C6E5
-:10967000193D78DC64FD99DB89DAFEADE80C8542A2
-:1096800009727ABB663F1F0B5476D94627C7DF2283
-:1096900097579512F2628F045D0D567131BD3F5D93
-:1096A0007FF7DB89ECEA1712ED44B7A3F18567CFAA
-:1096B0004FB01359E30BB8EFFF45EDC497B21B5FF2
-:1096C0006883F9FDF3ADAF51FEF8B12610988047DD
-:1096D0006F742A3BEA45F92093FE2A6C008F0A93A7
-:1096E000BF25652CD27B4A344F9512F265DFC856F0
-:1096F000087E6FB14AFB65D0B40B5D71AF141210D8
-:109700006F7769713320DCB1B33D89EDF8BCF5F1B9
-:109710009C2E99E070E8E3B1500BE5D7CF64A447E5
-:10972000F43C109DAFF57E8E661BE37523E0E7A346
-:10973000D9FEC1FC2C8A4DEFDC8672E20591FCB0AB
-:109740006F056EA6F7E678C0DFB2B97D582046FEF9
-:1097500086FDF434BCFAAD9BA0DD8A1DCE10AAE1D3
-:10976000E5DFF9E0FB550AE289AFFFFC258BEFADA1
-:10977000C279954832ED6F14F0388CA34520FF353F
-:10978000A5C811DE01CFC3BEDADC9C04B80EFBEA2B
-:10979000A93C7A0687EB18F4D9AE60BB4D0DE42FD7
-:1097A0007AF8BEF73145C960245718D913A2933F00
-:1097B000DD393C2EECCEE1F13C2987E3DB7552A08C
-:1097C0004542BA6EC27D0B294679D0AE9312BD7761
-:1097D0000882A5BDA6F7E73A09C219F195666EEFB2
-:1097E000A0F7381F6C2F7A99C1BEF1E7703BD9DF23
-:1097F0000F471A87C36BEE279DBFD7F8CF0CC78AD8
-:10980000ECA941C4CB619F9A9BC3E3285C0EBB9F2C
-:109810003F208C1F893CE6F9FA17072517C5F56E1E
-:1098200013E225209FDA4B8FAD21B955E46AC2734C
-:109830005209F693C0CFDDF0731503F669DFB43932
-:109840009518BD66CAFDA1C1F6D63B9527E6CDC1E8
-:1098500082767EE20A5DF6C6A00CF6DCDB5AB151D8
-:1098600019BD1643FD97D470FB6C31DA6721925B0A
-:1098700006BBCB6C9FB941DFCF01BA58129064A4EC
-:109880000BB39DD65E398FEC9A76B06B305F7BB0B0
-:109890009DC6E5CD1D511B53A1DE4B3522F9192F75
-:1098A00095F63E7701EA8B497685F44569DF1D73AD
-:1098B000E8FB041AC7ADF977509F9F7708A5C54B01
-:1098C000E0DDCB3547DD8B13D6FBA54947C7A25F4B
-:1098D000B035497E851EA7D97B0BCFFF7AE71E21C5
-:1098E000EE44BCDD2ADAB0DF85E51ECA5B9D26BAF0
-:1098F000699CC51BC5B89370A8A64FCB1EB01B9919
-:109900005893FD2AE2E14E3BC3F3830537F61AEC88
-:10991000DC8551A33D176902FB47397D3BD06CFFC5
-:1099200099ED98E5399AFD52C12AD07E79A9792717
-:109930003B5A3260C7CC4AB2FFADDB31E7DAEABE50
-:10994000ADD133ED1FCC92ACF7F72FD6FC5316E216
-:10995000FEE034F1435AAF63214941FCB96F7E9E6A
-:10996000CE75B8FF5B0C5B8D77478E43DF8F237915
-:10997000BBB5228DF2AEF7DC72564E2FAD97725FFB
-:109980000DAEFFF3769283C9F45B4A5464C530315F
-:109990004F54A0A7BE9EA3A2292C513F8C4A92A748
-:1099A000F0A31C3E0FFFADCC867E76668CA9567E5A
-:1099B000A95E0FFCD1E918A386FADD9900DFF5C591
-:1099C000368AFBEB7E698A9D9FF7B5EF5A1943FFF4
-:1099D0007414C0877028001FCAE1A2681A9547470F
-:1099E000BDF41C13CDA46771348FBE9744C7D0F368
-:1099F0008C6811BD3F337A36954BA313E839365A3C
-:109A00004ECFB3A2E7D1F36CD05B58AF2C5A4BCFFB
-:109A100071D1AFD3FBF1D139F43C273A9B9EA1E839
-:109A200037E97B7974313D2BA28DF47E42F43A2ADA
-:109A300057466FA0725574253DABA3DFA5E7C468F8
-:109A40002B3D27455BA8DEE4E8062A9F1BBD9B9EB5
-:109A5000E74537D1B326BA85BEEBFC9CA6D9D32FF8
-:109A600006B6C9946FCFBACB503E26E3C3439A3CA7
-:109A7000AECB51F722FDE9F5F66BE70ECCF50EE41F
-:109A80000C9D77F3AAB65E1F858EFC008FD3EAEBA0
-:109A9000B63E30741C8195F986D9B7E2F37B3A471C
-:109AA000E1F42B7590BDB1B589513E98A7B24740FE
-:109AB00079D319906658D1913BC0F3C08A7222477E
-:109AC000517FB883EFEEC5FDA84B623DBEA9482F7C
-:109AD000215FEA54E86F549B8DDC6B85C902969533
-:109AE0007A2677B381780ED85706BD260574FBAD6C
-:109AF00067E60484E7ACE20AB25FB5FDE4FDB78C2B
-:109B000066E8776C75740B12CACB558C25DAE15B6D
-:109B1000D72E7A28F19C8614E0FC396A1D7B0AE373
-:109B200064451D4A1D9E271CB3597D0A533C4BE2D8
-:109B300091BA54289FF970EC297C8EED8AD7A5C183
-:109B4000F3EC9DDD4FA1F819D7DD5BE786F239CF45
-:109B5000B2A731FC54DEA34CF54079C201F569DCB3
-:109B600026A9EA8D4C4D57109E786B3AC0B3F56D1F
-:109B700030B4A03CE9C30E11DC9281F507BBEDF1D6
-:109B800084754929EE5145F867FE8D7239CAD9AD01
-:109B9000526F4A66D9E0F5E9C479E33C41AF6CD72E
-:109BA000F6D1E584F50805043D1EE80B24C4033B0B
-:109BB000DB5EA1786067AA5C8BA1AEBE694C7E506B
-:109BC000413AE67E42EA9AD1A49F74BA03FC1AECA9
-:109BD0004929C0E96E6BBFBD698DDF10E2B7EA7F2E
-:109BE0000F7EFF3347935F49F0FB22CE23383C1FA3
-:109BF000D706385F021F9F1FA84A5EEF2A0DFF6637
-:109C00003C6F95E4B3085F6E668B950FAC5BA34623
-:109C1000DFC3E1F59BFFCBE876526068BCB24A2F08
-:109C20008F336BF969C9E4CDFE24E7449A0283E4DB
-:109C30001C8F97CA20E7C6249773358161E4579239
-:109C40007C87DB027ABE43F8BB8111C4F5EFB0C953
-:109C5000B598EF121BCFC84F00FBB20DF37746C586
-:109C6000940ADAC642A18C78AC389BFCF422B03757
-:109C7000A40A86A98EDDF8BCB832D3B6A80CF31AB4
-:109C8000347E931B0389FCA6EBFB017ED4E922AB57
-:109C900093CE5900BD623EE12E0D4F03FDF078C416
-:109CA000DA9B733BDB13E46067288FCA7AFD64F4A8
-:109CB000FBA6F61DE405EDF75F5C639D6FF2EB809C
-:109CC000A8D9397D2AD2796C0A93E9BC73DB119249
-:109CD0004F99209F84221E1EC2F1F3A3A90F619CFD
-:109CE000F657816C4D9ECBA99779FEFFD1733BF857
-:109CF000EAC44F35F21E3C57310AF4908272B20624
-:109D000060AF443DE7A07557185F47A586C5BB0502
-:109D1000C25B37FACD311B3F9FB1DFD1A592DE7117
-:109D200064CA987FB2CB1FD91BF027E70B394D29A6
-:109D3000C745FDC3E66B67BA83989723A762F915F9
-:109D400028DF3109F3847A9956BEC33DF98BC71FCA
-:109D5000FE10B8663FEE535507D457919E81AEFF73
-:109D60008070A967CA12C58747B8FFA4F3E7003F10
-:109D7000C9E53A3F3596913C7C2790B04F9ECCBECA
-:109D8000F9A1263FFB0243DB373ADD9FB67DA3C135
-:109D9000FBF630FC3FF3B957376F6303F13F4FEEEB
-:109DA000EB3D9282F6F654767402C6BD7A38DD3306
-:109DB0001EE75331FE07749052E932C56D85195A7A
-:109DC000DC65C878AD1E4FD6E37D7A5C2F5DA32B92
-:109DD000BC3000F578FA24595A44FDF5B24BA13F46
-:109DE0004F90E349E76B945BB83FEF5A93258D2E74
-:109DF0001BE8172425C9A9CE0626B767F2FDD70CA4
-:109E0000902F1DAB19F979B19744EAFFB86AFBC0EE
-:109E100009F58E570202512EA84C91B3B573084430
-:109E2000E432D1AB93B12EF4B7D9F7422E07C6B9BD
-:109E30003F15980A70EFFF54A4A784116E687471DF
-:109E4000A83C848D6B336A42B81F281E8532C059E6
-:109E50009F519381E5FDFB27849845FCEEF248A3D2
-:109E600021BE64C6537FBD6FADA17C852DC3EC7F41
-:109E70004E0A3A74BBB32288F6CE957D6D0E6560AE
-:109E8000FF53DFD70B163F7121DEB3135CC6EDCF56
-:109E90005C166F49B49B12F6176BB09F2D03FB8BBA
-:109EA0003D6724EE2FAEC8BD158FEEFFB07F7F312A
-:109EB000720ED657BD5DE5489F7A3EEC7E07DF0700
-:109EC00060135EF02916F4B1A0FC193FD1A3E64F50
-:109ED0000CFAAEC5CDCC7EF0ACA0318E7F3C3427E1
-:109EE000A31B3F2689E3EBF13CDD0FC6789D6CC9CF
-:109EF0007746FCEBE32F10B81FCBEC02C93B5D6F3C
-:109F0000823C8904FDD48CE2D1AA53A07CADE3A1AC
-:109F1000C50AF94549E44BFFBE01EB2EB1DA675D96
-:109F2000A0E59D98DFDF1CE4FA79819DC72985951E
-:109F30004B2238EE82A04B7026D8495705B9FED285
-:109F4000F75F1CB927AB10CF0E4744B19AB7791F02
-:109F5000E5AA20EB3FEF16B2D07BC9F074C0DE411A
-:109F6000FB72079688745EF7786422DDFB904C2EB6
-:109F7000BC89F453C25838978F37B08ED678D3F354
-:109F800064CCFB55FDDF1B53E8FC8D395FE6510DBA
-:109F90006FFB34BCFCBBF365F669F87B518BCFE8F3
-:109FA000F1AC8B93C8FB736D750F131D0D139739AF
-:109FB00043CFF7D1F0C39E1E4BF7726CE8B1C75385
-:109FC0000484C746FB970D7F1043687FE9EDDC26CC
-:109FD00079A1E7EFE8E5B493028B27EC23A4495D70
-:109FE00014274D3B29D17B33FFDD6EE23F7D5D922F
-:109FF000ADB3BE2EE6F79DDABA1C68FC8F009E77E3
-:10A00000D990C22CF3893E0B1AE3EFE63C8064FB47
-:10A01000DC07B576C7239373502E3738622523E1CA
-:10A020007B1D3FAF7FFE1B17F2D98693CE1956EBEF
-:10A03000F14A90FB2DA04FD725EE837AE6BFDA8652
-:10A04000BDA649C67D505D9FEAFBA06995E67D34BB
-:10A05000EB7DD00DCC5A3E26DB071DB4FFA9E9DB12
-:10A0600013C124FB9F65439F67DFADD1F370791F58
-:10A07000973BF87959F3FB17FAD7617DC10F80AF91
-:10A080006E6874D2EE5377A393F87071630AC56556
-:10A090001797F378EFE27B056DBFCE18877D11E44B
-:10A0A000C5323C5FAFE99DA32C5C8DF6E8AC4AC19C
-:10A0B000B04F1EAE493194E72FB9FB45BC37E1A53F
-:10A0C000497685E2CFD0570CED821A9EA7C894BE80
-:10A0D0003B30CEADC79FF5F57FA9E628DD8316039B
-:10A0E0003BBF2484F16791F8EBA5D726F07BE98488
-:10A0F00081FD7005EC840DE78EA17C8F8365DFA068
-:10A1000038EF068C8BC34C377CFE9B194447A094D8
-:10A1100063C8AFE3B3E2281F178FABC846BA7C7A97
-:10A12000FCA71E8C8BBE73EB713FAE536F7313E5B0
-:10A130001D98D7DD1C6736C7974F379E3C31B73F18
-:10A140004F80E8E145533C59975766F991104FBE4F
-:10A15000207704F1645D6EE97242975F07CBDADF26
-:10A160007A10FE7930E22498DED4E6DDCF971A5DCE
-:10A170001ED4F9F07327D9234F8FFF2DE55BE9F546
-:10A180009A8399C487DF288BDB697F16F3144A070B
-:10A19000D6657EE49AFE3276FBCDA52B0DF4D12F49
-:10A1A000A786956343CB293197C72792E56BEA7C55
-:10A1B0003058FF94909D9AF67B7BDC55F4C5F550A2
-:10A1C00043E3AF146C07CFCDD47EBC2312B7D04F7E
-:10A1D0006678D24E8A2C3E21F1BDC2DFF7EB010733
-:10A1E0007D8FD529AB57FBB83DDD4AFC1973D2FEF4
-:10A1F000B94F6DCE85FA3EBF1A437A78C8A7B6E448
-:10A2000026C8D3563BDF8F146D2CF2B8055E9ECC6A
-:10A21000D5F4320B07B0BF35B5C6F35CFA737B2EAD
-:10A22000DFDFDBE3AF0EA07DDD7AB83C80FCB3D787
-:10A23000534DF676B275BB53E727945F2503FEC4F2
-:10A24000466DBD814555DCC75D630F0712E38DEB9D
-:10A2500072791E47FAE4277AD06E6E956D9427D8EE
-:10A260002AF3FCEB36B734639BD6CE676827E9E761
-:10A27000A8E8BE0CC96DCCAF7E52B37792CDF3C9BE
-:10A280005C9B76BF68F73D35C2805EB11FA975D172
-:10A29000FD0F4C95797E53C8904F6DD7F44B9D2997
-:10A2A0005F4394BF98DF16F44776E55AF86D7B7CE0
-:10A2B000EA93B8DE5129E644FA88BAACF9FE696D32
-:10A2C0005DBFA7CDD77CAFAA68BAF74134DDFB10DC
-:10A2D000AB6BFA692FD2DB6AA7DCEAA37B1EE8DE50
-:10A2E00087285EB904CF7FA6F07C16F0FF26F2F334
-:10A2F00006A15E94AF2CE0A2785447BEAAE643596B
-:10A30000F4D81E5C0DFDB5AA752A1E5DE970DB3A16
-:10A31000719F2F33183988F398EA9148EF745C9451
-:10A320004A7A08BEA77039C264A19AFC41BA3405C2
-:10A330007D703C5F660F38289ED51A61BDCE31FC1A
-:10A34000FC3FF653CBBAF7D714A1BDEDAA443CEDC0
-:10A350000F4DC88858C809FD69DEFF7FEBDB6F141D
-:10A3600062BB0231F221E2BDA761F146DCD75FB1E9
-:10A37000530CE13EC2B7BE73F00C7EDEC8B8CF7C92
-:10A380005FDA945ED46751B783EAEDF15477209E8B
-:10A390005A054F07FABBAD8757FE18F1D8DAC2E36A
-:10A3A000DC663CEFF57C87EED7380ECB89F5CDF730
-:10A3B0006BB08E957C9D9C2EDAB784F9B2BC2ABE18
-:10A3C0008E141F3CE4A17BA08EEF7FDA8DF07D8997
-:10A3D00079A7E5F9879A77BE4CF68B463F4C0AAFD2
-:10A3E000C379DD247A3ADA7D784F1AAC37C2BDCB17
-:10A3F0004EFEFE7D69E9B4AE51800FD755F4D4AB63
-:10A40000E892FD7DA748EB1C959A685E2C26B1ED7D
-:10A41000F87ED789EF9F8774A066D1AE9658D04456
-:10A4200078F93BE065B5055E807E8A10DEA777DDB2
-:10A4300040FD74385C325A36AD9E6A3AAF3CD2FB6E
-:10A4400045CAF2389F24DC2F52965765515FF3B30B
-:10A45000D0DFC6716B65F6499C0DE03D59FECA79A7
-:10A460005AFFFDFD0C9FBF725EE2F8FAB85F625DB5
-:10A47000A79FCEBAB6BAFEEF74B4B354313D94522E
-:10A4800008655C27C43FAE13AE9716B72115A4200C
-:10A490001DC8DD79480737A487903E87931B12E3D8
-:10A4A000EB6E97809EC1AE73CA91037476518BF7A1
-:10A4B000E8F2C4CC67AD2EA3BC6AD5EFE53B3432DD
-:10A4C0007905F47215E2C12CB7464A272BF304F341
-:10A4D0003D342BF3FCC9E9C41E0CDF80EB8878CA3D
-:10A4E000ABA078C5B7B1FEFEFDE20EC7681C8FC7F2
-:10A4F000CDFA824C7E30212F4B87A70D37BB799C3C
-:10A500009AE21F5203639807E72D0D0972D988E874
-:10A51000A82D11BEAF808EEE1C8A8EDCAC87CE6B70
-:10A520002CD7F373760C9D9FF365F50FAC6727E28C
-:10A53000B7D5F31DA2CFB57697CCEF513BBD757D56
-:10A5400064F0BA3E32F4BA461EC3EF6A5E35DD638C
-:10A55000C4263592DDB4CBAFBE8179A44C0A19E490
-:10A56000E220FED1E4F64D672A94AFBABB4593735F
-:10A570002D4E19EDF1677C373C86F5EF624A18E302
-:10A58000A1536CAB084F7F87F93D1822B95A8AFB5B
-:10A590003E51961AD2F4E8538887194A8B9005EFFA
-:10A5A0007D0B141B5D43AA6C62B6B291E3E1C5C199
-:10A5B00072F0C561E4608F46CF37223DEBE7ED9343
-:10A5C000C9C143A72F070F7DC572F0CF79A7A1D7C7
-:10A5D000BF0279F3098E6796376E8D9FAF08B11071
-:10A5E000C6CB479ACF06F6A682FC559BEE22FA69A7
-:10A5F0007D5CA07C29B0C32354F6B848D8ECF5386C
-:10A6000078FEEF0EFE5DACE37836E3E9F3BC2C9EFA
-:10A6100077D3B5322C19F2A462C40F77AAC7E462CB
-:10A6200011F3FB6B889EBD9A3DA3E7F5A76BF2BFC4
-:10A630005FCFCFB4D178DE022EDFBD60EFA05DC466
-:10A64000A45E867EFC4D793C7F1FF881E81B46099D
-:10A65000233F644C924C795A9C5FFC12B777327D51
-:10A660004C205D837962F0FE04D813783F41A66ADE
-:10A670006C7753EA1502EAADDE46779340E7F4C300
-:10A680007B7E04E52CCCF702BEF1CE30D6F7B38446
-:10A69000B2857F1EAB63A598B75896AFF9E90E1641
-:10A6A00020FDA8F9E9FA7D81E2F0795F95F9238828
-:10A6B0002F9E9BAFE79918F571570AB38CAFFD57E2
-:10A6C0003E975BF5BDB5756857AFF230B2AB56A19A
-:10A6D000EEC472A683EEB509EDA97459DD5791A9B0
-:10A6E000DA0CF7F37A67A41AEEBDF587B30CE59C94
-:10A6F000865C43FD6064B4E17BDED2B30CDF0B9A71
-:10A700002A0CE551D1730DF58B00C189E531EB2E93
-:10A7100032D42FE9B8D4503E73F3370CF5C7C617BF
-:10A7200019BE9FFDF0B586EFE3BA5619CAE7ECBC37
-:10A73000C550BF9559DFDFB9219FCB29E0779263E0
-:10A740002DEEBA06FA1D0DD96188F32FD1EAEDC9B5
-:10A75000AC2EC57848EB91F252F287D3CF1DD21FB1
-:10A7600036CBC564F2D8FCBE4D1BEFA3A7DEAB5EB3
-:10A7700086748E421EE4D247EE37D7E29CD697F11C
-:10A78000BC04FD7731CCF7F2F7EF534A2ACD67418D
-:10A790009683599D0F5892AF58EE2FB4092117EEAA
-:10A7A0001525C39B4E8FC3E1ED0EADDE97C5DB21B2
-:10A7B000C11807427DF2B8055C7BF3FBEF3B7828BC
-:10A7C0009FEBABCA54F230F83D0EA7AB4F74384044
-:10A7D0009F3C9EEF1F9C1FFE51C3AB57DDA760FD42
-:10A7E000AB787D5BA814D725D9BED2DE7CF3BE52F0
-:10A7F000D55294730B3CA942E27DCDBFD4EAE9F176
-:10A80000ECD6F44F695FA9D5112A1DC9BED22FF12C
-:10A81000CE8D2AC4BFC2C7D3D7D5AE06644BFFCEF8
-:10A820006CC7B0E7F01E8C985BA2BC61B37F17D5F4
-:10A83000E4B6EECF497B6BC9DF6F758FA6BC8F5630
-:10A840007515E9CB8E247E2EE8CB3FE657613CE0C0
-:10A8500046833F37100F50693C684B76536B82FF3D
-:10A860008FEBA0DEC7EFD5FE0AFCE00FF34FC34E1F
-:10A870005018F7838F338EA7E3AA8DEC84E360270B
-:10A88000A0FC5D2331DAF78E550A8A955FDCB15A58
-:10A89000B30F5773BC99F7BBCD76C6C5A19584B7E6
-:10A8A00035404FAE4A8CC771FB778D9DDFBF297B4A
-:10A8B000C301D4B77D7E077B10A0DDEBE7F1391D26
-:10A8C0002F5F541E65160CB293330B86B093A78985
-:10A8D000655D786FEBB1933C2EA2E051441FDE43DF
-:10A8E000CED76FD57373622B504F15494D98BF2E3D
-:10A8F000322503F1B2E25991C5059463C6FC7C3B55
-:10A900006BFA01C6E3988FBF8F31570BDA49199361
-:10A910008C7A2C5335EA31EF8C2C935E33EAB19C60
-:10A9200006A31E0B468C7A2C6F698549AF19F5D8A2
-:10A93000A8689D49AF19F5D89875979AF49A518FE0
-:10A940009DB9D9A8C7C6C68D7AECEC875799F49AF9
-:10A95000518F9DB373B5E17B7977BBE1FB8467EFE2
-:10A960003294AB7AEE37D49F78E041C3F7C9BDFF8C
-:10A97000C7F01D10FD0A9E67C07B687111CF7BFF79
-:10A9800009E377A63A301FFF3A3C9F09EB787EDF58
-:10A990006F0DFDB10E7E6E2106FFE17AFD9945E84F
-:10A9A0001E009063FBF2A0DDF57121D4CD503F3D38
-:10A9B000FE1EEEDB5C1310C98F5B81C156A4874776
-:10A9C0003C71A487AB371BCF3F5C13379663403F86
-:10A9D0000AC615807E90BEAE33FD6E04D883446FE8
-:10A9E000D7295213DA9566FAFAB34E5F31F5153C62
-:10A9F000CFA1CF579F9F5D3F7FAAD19FAAD11F13A1
-:10AA00007711DCD7E589F4FB3BFA7C55F88F7FFFA3
-:10AA1000D081F338B153605EDCDF67B17D7916F326
-:10AA2000B97EE72607F2A7795EE6790CB2530B8C64
-:10AA3000FB8AD3447788F8EE3591F4114D01F9EC97
-:10AA4000517E5E6FD573229D8B413E447F418C3594
-:10AA5000105E56005EF0DE70DD6E3DA6B53BF68002
-:10AA600048E79B87E34745C3873360E4C71425D590
-:10AA7000444F46FCA6951AF9F3BAB72F74A0FCDA36
-:10AA800007F8162631E60919F9F53A7119EDF3E9D7
-:10AA90007856E03F1C57025317E77D3DCCBB5B194E
-:10AAA0008CDFA5BB36ADCDB3A09BE1F0FB48817137
-:10AAB0009F4EDF9FAB05EC382CF24A75FCEDF2ABF4
-:10AAC0004FA07C4CE60FEF2E30EEAB8FC01FDE9D0B
-:10AAD000286FBF027FF8B98221F55CDF2CF4A79CB8
-:10AAE0002C3DD46E11F79398DC8DF15A7B138FFBBC
-:10AAF0000DC4EFBEF238CF3B08A724733D9922E97D
-:10AB0000719ED08108DA27196785302F6AA4718E6B
-:10AB1000BF140C8A73FCA560E838C71B780E50CDB3
-:10AB2000C8ADB7213349A152BADF1941E079481FB6
-:10AB3000E3BA0CCAD72DCED2F28F9521F38F2FD640
-:10AB4000F677AB03EA498403FAFB149FFDF7B1558E
-:10AB5000FAA99FF461FA89D5717B2D66F374B472FA
-:10AB60007B8DF699BE8238467A21FAA56E8EFF5605
-:10AB7000078FDB9E6E9C2D583808EFC1C221F0FE76
-:10AB8000CFB772F8B9D5105807E5C9E95B3F87A977
-:10AB900097D7671AFDE5B5151CAE126DFC6F66738D
-:10ABA0007F607221E73F3DEF12F316532AA03C93DA
-:10ABB0009F53D2CFB5EAFD4C2EF450FD4F02759352
-:10ABC0000BFD9837CBEFDF599B69BC87E76F05B565
-:10ABD00093715E13B4FE2717329ECF3C9AC365CEA5
-:10ABE0003BFD8756FF1F0575F4C473B4E8973844DE
-:10ABF000D1129F530A799C40BFF766BA7E7EEE5E03
-:10AC00007EBECE7CEF02F0C9EBF8FB5047EFB0936D
-:10AC1000BF07FA88CECF2DC9E3E710CDF729444A04
-:10AC2000E57D285E4FB032CB7B7906E5391CBA99B9
-:10AC3000F2EF5E9ACC6421387CDEC36585C6FB11D9
-:10AC4000BEC039BA2B0A4790F7B0503B47D79BCAD2
-:10AC5000F5585FD0157FD0C2DF8D6AEB7487E6D7D9
-:10AC6000E2FE34EE93E3FDDE56FBE5D1424E3F2398
-:10AC70003D577D97231241BE359FAB4E769EBAD786
-:10AC8000D1BB2607E11DCB4268BFE72C90F7E4401B
-:10AC9000BDD47A85CE3FAE2D62E993F07BB92D8489
-:10ACA000E73A32E7CA6BEDC8A7C52C4B80726F6CD0
-:10ACB0000E8D7F4703934580ABB390EFA32FBCF578
-:10ACC000631ACF5F035353E8DCF974F4CF620D8C41
-:10ACD000EE2D34CFF32E8D5F5C6BF83D3919C5D660
-:10ACE00079F87769F408726B13F2456D31DBC1CFE7
-:10ACF000CFF2730A782D3DE56F8652695FF01258E6
-:10AD000037BE7FDE43EB776360EA7DB89E3ABF399A
-:10AD1000B43C05F379F2CEC2D33B4F9EBAC01ADEE3
-:10AD2000DF69EBDDE80FFF14E14D2DEDE0BF5FFAC9
-:10AD3000F9A95362B5F6D38E0AB68F4450FFA580A9
-:10AD4000FE13F0A9C8748E96B9043A0FEB529A8894
-:10AD5000AE522685BCF8BB68EC4A1BC37B5CA66A76
-:10AD6000EDD50626E0EF49502E20C969D3EF4BA858
-:10AD7000A1B616683F0DF7CD4298F71D5A8AFDD54A
-:10AD8000BB53658C6FA61437D5E27A3DB390F7714B
-:10AD90005792F312FA39FB81FBA796BDBCB726E1A7
-:10ADA0005E81B557BD6CBC7FEAAA97BFCCFD530747
-:10ADB000B75EF5F2FFC4BD02BA7C03356447BBFE43
-:10ADC00080C8EFD1FBFB9397DB711DD6D6B22EC4A2
-:10ADD0007BEC53C0B36B00CFF6BAF0335BD02E5987
-:10ADE000951EE2BF2712FB16C2F9761A93B1BD9EDB
-:10ADF0006F28B052D2D7731B04B21F98D4773D96F8
-:10AE0000E7EF4A93D17FF8FB936F14C4803EDFBA1B
-:10AE1000EDB807F353DF91FA3C08D7FBB7BEEA4120
-:10AE2000FCBD75AB48792874EE3B214FEC738DBEA9
-:10AE3000168C0A1F47FA5AD8FCDFD589F6198BFA07
-:10AE400049DF5F13078813EDDE87D30CBF2BBABC35
-:10AE5000CB6B28EB7A7EB9D3FADC7CE5282E97AE53
-:10AE600079A4D391A7E0F811FB2898E7FBDA39A081
-:10AE7000F77778C88ED7E159F448B903EDE17776D2
-:10AE8000395937C5057BECCCCDF507E65D44F8D0E4
-:10AE900083E0DCB73BCF817CB644607D4E626EB60A
-:10AEA0000FF1FD27CDFF33CF63C95BB203D77749DD
-:10AEB0002DEBC373678B6E14D6DE04F51745DCE407
-:10AEC000F79BE769D63757E37D3682D53D704DFB5A
-:10AED0007E07FD5C09FDA0FDB9A4C3F8FDD8B3371A
-:10AEE000ECDB02E3EED8E9207BF1EA61E2FD6347A7
-:10AEF000697AA99A4D3C3586F45FC63825B9DDA13B
-:10AF0000EBA3F79B1925A9FC057FDF179E1F36CB06
-:10AF1000F43C5EA8D07A5CB773CF3EFA6D61A9A706
-:10AF20001AE5DDCCE716A77D830DE4155577DEF035
-:10AF3000F41662053D5FB59BE27B13B5FB5FAED6B1
-:10AF4000CE7F541D30E7ABEE79E67768B7C1FC4F92
-:10AF5000E7DE9E0523BCB7E7D8B353D3E87C808EE9
-:10AF600097898017F1CBE32559BBE5497EB745E7C3
-:10AF7000A7E39ADEBD72DBECB5B9307EEB937F2E92
-:10AF8000C4F8718C71FAAE7A80FFFE4F953B9BE856
-:10AF9000CD85F41944BC9AEE7988B1D759027D5F0A
-:10AFA000BD2B8DE82400F6907312BEE1F45A85F7AC
-:10AFB00076227DBFC6DBBB34FF36B2EB365EFF7751
-:10AFC0000ED91920BE0CD8E8D91DB04DB2B867CB48
-:10AFD0007CBF5887B1FC91BDB710E5CAD5263FF4B8
-:10AFE00023C13A3FED8A51A3497E5DA9A8D3310F11
-:10AFF00060090BAFE5F15B7E6FCFFB52C7BEEF225E
-:10B00000BF6F13580CF0B4FC378FFE1AE5D8B58F1C
-:10B01000DD9B8E72EC03A9231BC75BB67D4D3ADE28
-:10B020002FF3BE144BC7F61FC4B93C1BA42F47090E
-:10B03000DABE949A2E804CBE9E480DFE7F65DFDA04
-:10B040005B609C7F009E91EFAFDFF12F2AEF535D95
-:10B050007D2C80FDF64E4738AE697437B584D0BF7D
-:10B0600034F2E7B53FBD375BA13C8F589E86BF3CAD
-:10B070006C77FD363BE5F9A21F8FC3AC607D343F92
-:10B0800073FB155D471D28AF651BEBCB3F6FF0775A
-:10B09000B0901CC86F2B766CF8584CC7E7076FE26E
-:10B0A000EF41AD30D9A74B35F96DA6FF9F9BE81E48
-:10B0B000F043F18518C0C57F8E89CBF1D69FDD376F
-:10B0C000FE30C0F7E1B617D2F1F72674FAD7EF7960
-:10B0D0003ED6B578A163887B843ED2F8A45F3F68F2
-:10B0E000FA49D90980E54071177F2EB377A79F07EA
-:10B0F000F35DD6690F21CD2F7B5454DD68571D7445
-:10B10000923DB2ECD1E344B7CB04B54F203DC7D25A
-:10B11000518EEBEB75DDA37F9A8E72FABAA0C866EA
-:10B12000022B5EFBCB13BC3ED0790AD4BFEEF1C339
-:10B13000D3BF8B6590272E8BF59ADAB5C7D1EBB6C6
-:10B1400058AFAEC3D3313EDFFAB37FD27A7CB05B67
-:10B1500060394583DB2FEDFC13C5C13E8485F16664
-:10B16000727CA1BE59D125363A32ACD6AF7BD66FB0
-:10B170002BE93BE5850FB78E1B4631AE1F7FF3E809
-:10B180002F7E0B702C7DD3199A89E3FEE28674061C
-:10B1900074F067A989D3FD8FD664A3FE5E6A8F65BC
-:10B1A000CBF4E4EF976EFD36D1E3D5BFFF76B6B6AC
-:10B1B000DF10B4913C8805719E4B1E9847F3BC8A02
-:10B1C00045881E97FE88DFB37802FC6C2B3FA152A6
-:10B1D000E172CBC9568EBFC5877213EF6C01381C64
-:10B1E0008CDFD7F50ACF7F77B24B3312ED5C87C285
-:10B1F000EDB9188BBF8D76E70A50CB28D7C4DF9FF7
-:10B20000988EFDDC58243539293E6A7D7FCDFF03B9
-:10B2100074C90FBA00800000000000001F8B0800F6
-:10B2200000000000000BE57D0B7854C5F5F8DCBD8F
-:10B23000FB0A792D79404220DCBC1309718104128C
-:10B2400040DD10C020AF0D444589B0040C0112123E
-:10B250009116ACFE9A1B0208946A50AA54D02E088C
-:10B260008ACF0604C18AB01145A8FD300AB5F8A2FC
-:10B270008B206F6441A8EBBF54FEE79CB9377BEF8E
-:10B28000261168FD7D5FFFDF3FFDEA70EECC9D3B40
-:10B2900073DE7366E66C0D83BF64C68A3E1ED6D528
-:10B2A0009BCD98855D34DF97CBD825C6A467EC8C01
-:10B2B000D530A3ECB532FABB9AC4D88975964EC284
-:10B2C000CD507661954DD0FE2AFEDD1628A74A02A4
-:10B2D0006379D4FC13D69FB1D9F82F09FAD97862D3
-:10B2E000F86AE897C5892C328EC3CFC430662B0F1D
-:10B2F000AB8DCC87EF1D3C6AEE06F5728C81A5D92B
-:10B30000A0BEE51B82993D56C2F66AFF35DB2DCC07
-:10B31000A38E07FE5FB3FE1B33C37E0CCCD77D50DC
-:10B32000DB7AC66A737E1583F38894964179C2EC02
-:10B330001BFE367E07BEBB01BE53B112DA676AFA46
-:10B34000DB72EA739683EDCD81E749F8DF057C5E19
-:10B350006259A42B8CB1E9304D56D076FEF3BFACC8
-:10B360007FF43D4D7F395278CCF150F8C70036E07C
-:10B37000AA18789FAD89652CBEEDFBDFD7C98FBEBB
-:10B3800067C2B765C6A04995C9FD02E2A9EA338B39
-:10B390005D063C56BD76D96C009809CC97D699B11C
-:10B3A00033AFEEFEF45E98CF992653CC28FAAA2349
-:10B3B00042E812C07BE5E66F86AF86F626C07B08C2
-:10B3C000D073F696EFCD06681F57C47C1618FF9908
-:10B3D000182763BD116FA6AFBD1ABC15C1736F18D6
-:10B3E0008D23C11087A5278141393B86D93DF0FEC9
-:10B3F000EC83A25D427C31DF625B58DBF76B9A8E97
-:10B4000006D1455FCF98CFECC4EF6EF9CD05314240
-:10B410008B77E3D75E0DDE553C07E3F59E20BC5EDF
-:10B4200066D991F01976FAE5593D5DD96DF1ABE237
-:10B43000F5DB3A864CDEFAFC624F89F02C6D870F03
-:10B440007585BA1D4AC9D8A74C83C799AF9C23FEFE
-:10B45000FD47BCC844E09BD9EB7F588C7C0568F560
-:10B4600059807F67BB2F10BCC861F531829B4B852B
-:10B470009CF6E6ADC767707D77446A5E80FEA605E0
-:10B480004C0E877E7DEF88EE7530B4F3922F220A42
-:10B49000E6B728844D764279DEA6C09D55984D9E2C
-:10B4A00002E33C2FE7D8647C2F844D6802FA9C7736
-:10B4B000FA223A8705E67D64871821417BAF9B1508
-:10B4C0003785B5E543C61AE8FB5ED6517D3D8D73E1
-:10B4D0009878E5752F7CEFA26C6416F89EB7FEFB9A
-:10B4E000D7BD501E335A6D88A769F5774730037C66
-:10B4F0007F47CAD809D0EEFE7D803F9A9EC31C0FBD
-:10B50000F89DCAA7CE4E32F9A9C1303F313C77CF62
-:10B51000DBF07E052056047E9DB65C8F9F99CC198A
-:10B52000E94942B93505F884FEEB367BE0BDE9AE6A
-:10B53000B0DA65F0DDCA35FAFA993BCE107FCD0C52
-:10B54000E22F17F2577C5BFEDAA0F2571FD607F9FD
-:10B550006B981866407E3EBF57745BE09D8B0B4D29
-:10B560006C31C0175F15DC0CFAB9B8031A21BC9D09
-:10B57000C34C8E25BE55F95CC5DB59E4BF8CB6F8CB
-:10B580006CADDFFA55FF87A149D59B5FE4AC86F22D
-:10B59000EC9B9FA5BF8DF0B6BF257EC1DAB62FDA32
-:10B5A000F9C3241AD74E0BC3719DDFF941E2C308DA
-:10B5B000FFC96247BE3DBFC0E260A8EF7686BBD33D
-:10B5C000B0BE07F003D0BDE19DEF7350DF33B690FE
-:10B5D000E8D82299A9BCB8E39F87059CC70E8B8445
-:10B5E000F3A8D9094880F76BFE14E266F8FE3BDF4A
-:10B5F000F77785FD7CF3996D662EE2CF7036613367
-:10B60000F26F67E6C0F9D4BC5DF07C3D7CBF7A4B3D
-:10B61000B3792AD417EDFA570EEAA3F39B9BCDA872
-:10B62000AFBE35799F63C01F5F48131B4D80E76F26
-:10B63000C3A1B36E8CCD4D5AED94C3DAC30BC7C30F
-:10B6400079C003CE0BF052E9CEEE181F17FF6BF155
-:10B650007161127EBF6AC700262669F12238F8F3AD
-:10B6600070B755A0F9F3E73BBFCF6161D79EAF2D0F
-:10B67000C94CF2FEFFCB7C7392FE5BE9CBF9FD4D2A
-:10B6800089DBA560BE6FCBD7DB7E49F0EBE1761A94
-:10B69000EF75CAFB98FFDAF9FFEFD0BBEABF76BEC1
-:10B6A000D7A2F73E85DEE1360BEAAD77FE95C86E90
-:10B6B00060DEBFF97F74DEADFE8FC16ECD85F17D9A
-:10B6C000CEDC77160AE495B4EB8F6C4F12A83D538D
-:10B6D000D61D6314BFA2817D3D740A7C57067F028C
-:10B6E000FDFD86B0AF8D07016E013F01FD0B86CEDB
-:10B6F00009E0A1A5B48F7B19DA6D632DB3016CFA53
-:10B70000742AC113CA7F30E642FB3BC1CFC3F6FBAC
-:10B71000EBBDD3EAA17E7F6783D400F058C7F8B4AD
-:10B720002D00DBBA89365CC73438FA5925CDF8C606
-:10B73000E6EBD723F706AD2BEE9EA0AFBF8BAD8B0C
-:10B7400035427F77559A981BA6746750FBA7926C79
-:10B7500034CFBB59ED225BD88DE3E978125F9F357A
-:10B76000B0BE7B25C48B43B46F606DF1C6106F888B
-:10B7700097B87E6C991DBFE2351E04D8A2F857F029
-:10B7800047F278678CF505C49385CD61BF84FE2EA2
-:10B790004BC65A6C6F61B06EE4E316AE0A6DF106EB
-:10B7A0007F92B13FB9E24482B18E0719E2199FF747
-:10B7B0008CD3BD4FF30EC6F38DE37541DA5388D7B2
-:10B7C000D270BB1BF9C2F17CAC11BED700781684D5
-:10B7D000003E553C05E3FD6DE40D8D5FAE96D9CC82
-:10B7E0003709FDCE0816615F06FD4758BB33239F1E
-:10B7F00087CF128F858DE17A4D1CC29A96C17A8DC2
-:10B80000E51BCFB6CE2B99EA3D0FC37B0D0FC0FBD6
-:10B8100088D7EE4C7212FF97D98EF7C2659E8B5D6A
-:10B820000D0DF89F1FE583FF994425F1ED47EBB916
-:10B83000BF7979F01B8BFB80283198B3DC1FFD5C4E
-:10B84000E54FF696E17B2233D871FDCB1C0EC9D6AD
-:10B850001FFB65B4AE89CC37E8D6BF9D1D9D7478BB
-:10B860008B2E8ED2C1B1CE6EBAF65D2724EBEAE301
-:10B870005D37E9EA132AFBEAE01EB50375ED7BCEDE
-:10B880001FA28393E43B74ED53968CD3C1698DF76B
-:10B89000EADA67AC2AD7D567B967EAEA7B6D9CA379
-:10B8A000837B37FD4AD7FEE6ED0B74F57D3CCB7408
-:10B8B000F5FDF63EA183F35A9ED1B51F70689DAE8B
-:10B8C000BEC0FBB2AE7ED0C9CD3AF816DF9F74ED94
-:10B8D0006FF3BFAB830BD987BAF645D6033A789896
-:10B8E000ED0B5DFBDBE38E06C53B6CF283B9A8C6AE
-:10B8F000809F40CE46486774ED618556867C6352D2
-:10B90000F86164E677BAFAD1F67FEAFA33B35A20DF
-:10B9100002B25523959D58139561AC85CA877ABBB1
-:10B920004626A33C3C272F46A6DA5FF07D22DA911B
-:10B930008F063F2823DF5D8E6336B10F8C87F98C2D
-:10B94000C8D786D02BDD5D9AB851845F649E7EC0D7
-:10B95000877E814A9B3F9479A2810FFD215446F94D
-:10B96000A3E979B4BF339531FE047A1EEB8FA7B2F9
-:10B970008B3F85CAAEFE242AE3FCBDA88CF7675135
-:10B98000D9CDDF8FDE4BF0F7A1B2BB7F103DEFE1E9
-:10B990002FA032D15F44CF7BFA0BA994FC23A94C92
-:10B9A000F28FA032D93F9EDAA5F84BA84CF54FA4F0
-:10B9B000E769FE7BA84CF74FA532C33F85CA4CFF11
-:10B9C0002C2AB3FC33A8BCC9FF20BDD7CBFF009500
-:10B9D000D9FE87E9796FFF4354E6F81BA8BCD95F0D
-:10B9E0004FA5DDFF1B6AD7C7BF94CABEFE27E97902
-:10B9F0003FFF0A2A73FDABE9799EFFF754F6F73F44
-:10BA00004FE500FF5A2AF3FDAF5059E07F89CA8104
-:10BA1000FE37E8BD41FE4D540EF6BF4DCF6FF1BF6E
-:10BA200045E5ADFEDDF4FC367F33950EFF87F4BCB3
-:10BA3000D0BF8FCA21FE03F4BCC8FF319543FD5F20
-:10BA4000D0F361FECFA81CEE3F4AE5EDFE2354166D
-:10BA5000FBCF5039C27F8ACA3BFCDFD17B23FD1765
-:10BA6000A81CE5FF273D1FEDFF81CAD678C26053B1
-:10BA7000905E6CD57F86AB50B2B0A876E36DADEF2B
-:10BA80002BFA7845E8730CE31E636A055AA73F1D3D
-:10BA9000FAED7BA4270B2C12C28BB0693CFF8EAD54
-:10BAA0000B63F7E13F24C69A0B2CB47EDFFF3FFC0B
-:10BAB000BDC58547BF7C10EDE3031686F63158FF00
-:10BAC000AADFFD287F772CFA618BFB7AAB30FEF280
-:10BAD000DB246F1996DB92B93FF27A32B7B75B93EA
-:10BAE0000D543EDEDB4665D903699114A78AB9BEC1
-:10BAF000795D56ECBEDAFEF7A90A1CE64B247B7191
-:10BB00009DFD5C6FBB45D65FFF01E33A8E06230BBC
-:10BB1000B9156023B7F7F297E1EE0D30257948EDBE
-:10BB20008B18E79117586C0D3188E75FFF11DBCF59
-:10BB300067CC6981F29964D77ED40BDF8724BAC1C0
-:10BB400038C25FED8071E13F6BFF9FFF2FF77FFCF5
-:10BB5000A7FAFFBBC247B7A7384F27A35F6074E4BB
-:10BB6000201D862C881763E0FD29CB051BF2D1D45C
-:10BB7000857D86237FF4650E8A93DE17CD263BDB19
-:10BB8000F1CBA2520C8A7F2199EF86F19C63CC8382
-:10BB9000FE44B9C4882FCB77086E99E2D08E88D145
-:10BBA00060BF2B15BE2D5F526F9E07EDAAE379BCD7
-:10BBB0008CB979BCCC0AFF43399AD5B8760F851B6E
-:10BBC000C52B141FBB8C7E2FB0CEAC8D6DE3B1F3B3
-:10BBD00030CEBCDD6C43BB51DD1414CF0D8A9B0508
-:10BBE000C7CB4253C263505E999DD9799C3BACE26E
-:10BBF0006FF83D16218931D7C68B1A9F9598D415B9
-:10BC0000F1384CCC8EC475CCC5BD69910C4B49EA5A
-:10BC10008AED5C408B162805A36B003E077CCA4862
-:10BC2000575F7DA87B1D8CEB08D813A91F0AB76B43
-:10BC30008019E3919FF760CB04A21AF96135EB45B7
-:10BC4000F2EBBD0BFEB918E3D833928CB40E988298
-:10BC500031771CDF5B9DDDB240FD12DE7DAF091444
-:10BC60007795D99C388CEB6AF643C8AF752E8A1D40
-:10BC7000938F745AD2B9AF0569253B3E4DEDA2A111
-:10BC8000CFC206C26B795C34A7CF7613F9B5409F5B
-:10BC90007AA4CF0CB7E99816CF97D91533EEC7948D
-:10BCA0002FB940F49A19A097AE5D756333D115E8AA
-:10BCB000A47B5E537B428DA31FFB297A15A628F136
-:10BCC0004D855E183FBF1B2B1F8926FD50B6C093C4
-:10BCD00056ABE1D3E07D89D46903239D200FC5DDF8
-:10BCE000383D98D1DE05E9F9DDF23CA257309D8A56
-:10BCF0007F9C4AF4609F87B30D309EFB52D8E4715D
-:10BD0000F07CB2127FBDAF614431C6CBEF49E1FA9E
-:10BD1000F223587F3A60FDF9719D953940351FA88F
-:10BD2000B311FCD7BA3882FF562751F9595D2695D1
-:10BD3000C7CCACB249235FC000661CDF6445AE26A9
-:10BD4000A7A8FB5273E330EE5EFCE3813C03AA50EC
-:10BD5000B9A964D82DB8BE002468F033A134947C0E
-:10BD60006915F69A6CC3E3507F2C15EC1B90AECE90
-:10BD700041BAF62CB35F0046FB65E4FC047CB10ECF
-:10BD8000F9EF9E51D1BAF6772D49D0C1F352241A5A
-:10BD90005F49718AEEF9BD65BD74F0143FACE7E10F
-:10BDA00053A952B14186FE2FFDC544FC7CA97640C3
-:10BDB000D7791C26BE0BC6FF31B34C7104799DC5E3
-:10BDC0008EFAEF6408E7EF937F15DD0DB4EE952949
-:10BDD000EE72D96A93709DF2CBA97222D6FF32140B
-:10BDE0005CF23E882F9161FC80BD6C21FD39759518
-:10BDF000C06494111FA3F5F2DC972C34CF69AB44D7
-:10BE0000E6EA477C9288EDE7C64AD4DF7D295213E3
-:10BE1000F2B36F83C5BE0E6AA77A95F785BEB40FDD
-:10BE2000523DE76F878D280FE92D3918DF2F4BF230
-:10BE3000C4A21E3CBBDE44FB5ED5E2DA8A3020D1D0
-:10BE4000ACDFBE11512091F8117E4F7F1CBB16E76D
-:10BE50001F98AF9BE222DE9ECE6753009FA72BDC8C
-:10BE600039B44E7E84C7E3DBE285919E920D11D2F8
-:10BE7000069CEF54D7005BB6D61EF27DBFA9267B89
-:10BE8000177B36727F6E3CEA8163CB4DC518770114
-:10BE9000BD3F06F174AC31DAB08C16559B89BFCA30
-:10BEA0008D9259FBDDF2E5A283DA837E2F417BBDC3
-:10BEB0004274B101083752FFF212C185FB4EA92C22
-:10BEC000BF2BF2ED830F0CE88AF398D4C13EE3B7A1
-:10BED00020332ECD3ED6CC7744A71BBF97EB3596AB
-:10BEE000F6D68E9FC781525D4BBACF413A6D0AB1EB
-:10BEF0002F9350AFA644E23AF5D441B01BF08D1910
-:10BF00000DCD3912B05ED583DB880E95639AD23D94
-:10BF1000F0BCC5EAFA00F17832BEE9A9411827DA87
-:10BF2000F17CA28C76703EDF5F9BF9F28C9E5A7F8B
-:10BF3000BEAD3FC1E20CF95878BA08801797C486A5
-:10BF4000237E27B226257EE1A6F149A874011FB6FB
-:10BF50002ABEFF36D5609F742017D11F6E43BAA842
-:10BF6000FD1D35F138D7E72982CE0EC7A672F99E9E
-:10BF70006AE072C7760AC4A740B04F5335F6B2865E
-:10BF80002D277B19972032DCB73B9512A5E8056E6B
-:10BF9000FF66A1FDC37D619B40F251B5D1E27603FE
-:10BFA0007FA5A472F99C697EEDA9BED83CA9D68C68
-:10BFB000DF99B14560CF40D3D32677450BEE4BD9FF
-:10BFC000D62E8CA2F74C7637F2A9A2DFADA0105086
-:10BFD0002F4CC77F427DF54AC1ED217E71921D9A9B
-:10BFE0008671135CFFA39ED7E89136FA3D48AFDF18
-:10BFF000CFF4F68835EAED8B3334DC8AE39CB992D2
-:10C00000FBB581F188EC2AE0AAC2E5DE3386C62BB7
-:10C01000505C24F8FBD3717C385E189FC77EE3E345
-:10C02000A9B07339AD6A14DCEE76C6A7E23572307A
-:10C0300093D03ECF5A2FB8911F87C53C40F89D0939
-:10C04000F88D46BCCACE88BB01AE004672537C85D3
-:10C05000E3BF660DC73FD0F913ADDDFD26C66746C9
-:10C06000BC7E03F653C6FDC0DAEF89EE7B80BE28A6
-:10C07000BF3336B9CDB811798635468421DFAFFAA2
-:10C08000780F2E0BBE59F946175CBF964579D20C36
-:10C09000A0B7A2E5A8278A6F09F05FB0BD6E6397CD
-:10C0A00083F0233327D9A13678B22E6FC17DEF36C6
-:10C0B000F453E262F7E3BF003FF7AF171D2139BA2F
-:10C0C00076CA790499F8BF52F6919F5009F36CB083
-:10C0D000E1537938E2E57E3B23BD7BA3E30D1E27C8
-:10C0E00013CB883F31AE877EC8BF3BDE60FFA32401
-:10C0F000F5A7FD8F603D12EC7F7C69721816A0DFFA
-:10C10000F731DF17BF64F4F440F9BD14936C871660
-:10C11000013D1ADBB72BEA79558F5628764BEDF7A0
-:10C120007EB457001F5FF54604D25DA5FF74B413BB
-:10C13000D9013BF1CBA9D03F7CEF97DB42A8FF733D
-:10C14000A3C14E419F65CF7E10C134FA6F414F5756
-:10C15000752AEA13D5AE896B136DC05FAABEBCD633
-:10C16000BAABC3798505CD2B5C3FAF729C57BF40FE
-:10C170007F5395797DBD84CFE7E8723EBF696DE658
-:10C18000C5EDFE2F9FB7D865F20B3CB12887273746
-:10C1900089AC81E8CBFD86CB56E0A73E18BF594E4F
-:10C1A00076FD542C9330AED3A1FD5E6121BF60C6F5
-:10C1B00056BEDF7A5A28EC4A1BFFEF79221E42B99D
-:10C1C000DE2C32B44381F1B4DAED95A9B11ABB7D0E
-:10C1D0009D78C3382BDAB3D9803AE4FBD93BBA3225
-:10C1E0003CE7B2BC903589B40FEF253D062C44F1F5
-:10C1F00069F0C375F1060BB35BAD48A70EE2AFFF64
-:10C2000048BB30690EE1C3978EF857BF5FD3C9634F
-:10C21000EA8A7ECD2681FC9AEAB98511850CBFC3D6
-:10C22000E3669B53B99DDAAAE839C1514B7131F0ED
-:10C23000696C8FE3B8D6F0F8307B9735217E11A674
-:10C24000F8B181CF43906CACAC2F8FCB5BD1AE8576
-:10C2500019C8AE05E3E16BE53BD5A281FCDF2A33CB
-:10C26000F783CF0BFCFCC7BB8A7D7C3795FBC31FD4
-:10C27000A4F238C479F403A1DFF3B758DCF502BAAD
-:10C28000AD465A271B075BDCE8CF18AD611E3107AE
-:10C29000D16BFCB6559E015F93588B09E93926FF97
-:10C2A000818D389FC3DD984DEC4CD54EDC479848C6
-:10C2B0009A81B1FDA62FDFC778A40C6D45582B4C91
-:10C2C000CC3FD103DBAF4118E67F38A4E97D8CB3C6
-:10C2D0001C4E3232DC1790DFB190FD370DF1F6A025
-:10C2E000386527C61AFA603C66F722E4A33D71D18F
-:10C2F0009936683FD9D8C92E72FD33F4028EB752F1
-:10C30000E0FB370BBD79489F9BD942DB712B6D2D2C
-:10C310006CB91AFD53FC6364C7553E8031550D81DD
-:10C320007F0C649CB1F2099F3A18F04AF0F7A973A8
-:10C33000C7ADEC8E9B26526FA47355B2CF88FB29F4
-:10C340003E81F9D6011EEECCF7191D482F076B1A56
-:10C350000BFCEBD9C704FC0E8A007EF76E4FF2305F
-:10C36000C403CB945824D48F354A04772F6651A246
-:10C37000B26F8071AC438304A283C12A9970DECE70
-:10C3800062A12FEE8B562DB8BE71866CF8F5B8956C
-:10C3900083013618F87AF621BE9E9D281F19467E25
-:10C3A000D26026201FD6443599681D0DF282E3EF36
-:10C3B00003DD68F137D1E8E5E3AB84F115A05CA4B7
-:10C3C000121FDF5B2B903F59636E3FAE119BA6EEB1
-:10C3D000CBD9246C3F0BFE857C3D6BC7B634FCDEAD
-:10C3E0007281F3C12C95CF5ED5CBE58034467CDAE3
-:10C3F000115FE72AFDE7A619F839AED6EF3591DDD2
-:10C400009DB5E38343B8AEECA8FF6A0BF3105EDE84
-:10C41000B150FC4030F852892E8848A0C344F4271C
-:10C42000C145EC9BC6FD44953F2BD0FF48C192C748
-:10C43000450CA03CD11E56363E6F46A4059F3F02D8
-:10C44000C787CE01CD5C1FFC5C135711757A87E25C
-:10C450009E82D9370DC723DC1A62477D3CD1DC446C
-:10C46000EBF2E076A646EE679996703F8BF6D50024
-:10C47000B62CE77EE6C4EEBEDE8CF49C6DB890C4AC
-:10C480005AFDE20AFE69785EA5F38B2D1847C0B805
-:10C49000D72AEE0F1A15FFB57CB9DE5F98B850E3C6
-:10C4A0002F52B7BE6A1CAFE991508ABB58D09FD0BB
-:10C4B000F8017F3794C8A887E564239DBF34B16035
-:10C4C0007FC2C9783C933F372A7EE2D034936EDF37
-:10C4D0004D1EC232110F65A8875250D53897603C67
-:10C4E000EF220B6FC4B8D930F1118AFF95D5F373E1
-:10C4F00069C1F1BF8BB5EF3F8BEDB11E9FCFEBF460
-:10C500006322EE6FC2B2D429DC0AF2DDE9F06517CE
-:10C51000CA07282A13CA7BC8FE6F10160C914CC894
-:10C52000C7EF7B9EC5FE65B3D5867AEBE9D008EAF6
-:10C5300067FE7C81E2C30B6D5CDEBEFA327C1DEAD5
-:10C540002935DEBBB8B0DF2A3CB7F4EBB45DE3AC11
-:10C550003D503D303AB70486F11307CCA7F40AC822
-:10C560000DC1EF8F7344029FBFEF9B64053CADDCB0
-:10C57000F0FE3823F0E3F9DFF99E43F8850DFB392F
-:10C58000FC5B5F6208C26907C619418ECED7ABFD5E
-:10C590001D18E7C07DF7DF73B801EA6580CB50BF97
-:10C5A000E1BC070AB4EEDF8076293610EF2933BCF0
-:10C5B000CBCB21CC83F6F35AEDFE98E6DC80F65A1D
-:10C5C0000C3F168EFEC5960C07C19B539C8FA5A1F0
-:10C5D0001F74D0DD2516E35806D68274013BE66849
-:10C5E0006F5F7A432A97DF4DE9BC3F155FD0CFD309
-:10C5F00069B137DECF6D6DFB71FF3BE3E99401FD5F
-:10C60000E4E9FA79E9DFE9A72AA81FD56F030758FB
-:10C61000423D7526D3F11ECE73D6AF1D43B6A0FEA4
-:10C62000D92F129F7E57BB2D1DEDFE77AF5AA2D199
-:10C63000FECD7AFDADC40A8C23287ED199E6CFCCFD
-:10C6400012BC3FDB2F3207E8E91ABF40E5EC2DCDE5
-:10C65000E6E1D978AEB6D95CA4195795324EE074AC
-:10C66000E3388D1FB32F4D8D3FAFA0F1CE7AFD94EF
-:10C6700011E939CBD0741CCF1FB3813CEE153CBF00
-:10C68000CDCA7B87F1BC413B71808FD2B8DF11D717
-:10C69000CBB11FE7B709F539F28B819F0F096EDF28
-:10C6A000359DF757D689EBF9BC83F68A03B4EECBF8
-:10C6B000318850F63F546B2E87E70752861C4A6B31
-:10C6C000370EE9E371C81D3C0E5916D532178C1987
-:10C6D0008B4ABFF804CADBC8A755F900D103FD5245
-:10C6E0006C51E190F14307F33817C29737189EC495
-:10C6F00073847B3BB5FCE200DA87A5E16C1DC8D9E9
-:10C700007D03C21337C338A6CA9102D84E566809B2
-:10C710004F9F02ED4E241746A5F3F327E41F9E48D2
-:10C72000769EC3F17993420DE08C309799C7B35C44
-:10C730007F16299EE5CA0975B9DBC1D719059F5136
-:10C74000E9DC3FDB6B8071F6C571F0F3BDF097B8A3
-:10C7500019E34D0B7A0AC877EAF76F4F29EC9C9ED4
-:10C7600017F8FEED29CE1FD362B5ED2319B6BFDE53
-:10C7700071FC53B1A79DD339BD9C8381BF347A7FAF
-:10C78000DCD0501D5C3A2A9A39B4F1CDD2041D3C5C
-:10C79000A12C45D7FEDE69BD74F5A32D2DB9B537A3
-:10C7A000E0EF8B119991B4FECFE3EB90AF765CFE96
-:10C7B0007422FAB1EB45BB00F39AF1CE864F0751D4
-:10C7C000EF12C5B94EEF15C91E817B6BD6EE9F9C4B
-:10C7D000632D74EED8D87921D9BF5971FC7CF70C40
-:10C7E000B77EFF438DCBB7B76F82F6AC0ACFC5B427
-:10C7F000B76F1288C7FFE4FE49BF74653DDC97F54B
-:10C80000E5EBE1B37B60A6AC687B33D1AB619F689D
-:10C8100047566DE8213001C679FB168B3B04C67D77
-:10C82000EEAD236649B37F52E30703108DEF1D3150
-:10C83000E379AA03695C6FCFDE71C1CC902F763C9F
-:10C840004072DDD2EC8A8945FB05FEEAD65CE4AF96
-:10C85000A65CB47F7B0D3627EE87CD5A3282E2CCC0
-:10C8600091FE895456358EA07EABFDE3099EED0FF7
-:10C8700025F823B165CBC7D8CFD39136B4E7D546D9
-:10C88000F955A44BB514DA0FF7AB666FF9F8D2AFD0
-:10C89000D08EDAF8BD8ED1E227B9583FBAA7CDD0F5
-:10C8A000D019C71B42FDB40CF92217ED5231AE0B63
-:10C8B000E079D5E60217CA7D6143B80DE55EC4F3A1
-:10C8C00064EDF0E9E474AE5F4C5E3EDE61FE12EAB8
-:10C8D000AF757D9F9E4CF3576153EC7A23EA0F7539
-:10C8E0001E2630F858DEE1EF4565CD9612239E8B6B
-:10C8F000FF73E6F3318827681F8665EAD041A46795
-:10C90000BEAB1D10C9DAD15B6A6951F4F044D4C3DF
-:10C91000D05F69A6E3572897631EF11AADA847C3F5
-:10C92000AC36DCFF1893DF47AAD0CC477CF71E5CFF
-:10C930004980AFE233A11F30114AADDE9EDC817D1C
-:10C9400091D30D8A5F54CFCF75AAFA7DE5130CD72A
-:10C950006193F859AD56B9AA56DAABEFB708DC1FA8
-:10C9600090B7F2B87E75A6EB491C6F4B219BB0992E
-:10C97000F4694B6249F8CF37FE08630BD139C22600
-:10C9800019705F41AD5FD53A0F2EDFD79AC722A548
-:10C99000FD47229B8F7CF1D16DB7B538A0DFE687CC
-:10C9A000FBF5133576EAA5747EAE99D97C57485FBE
-:10C9B000EC0C95500F8CC6BD87DC80DF8FE72131F2
-:10C9C000AE51B3D3B20ECF83D544C03A1FBE3FAAF7
-:10C9D00097EB25C447F3AE824B788FC6810B33901B
-:10C9E00073C78E0197F09CBDC30ADAC68E7E90E3B2
-:10C9F00065D2FF1D8CF75AFA2C75E8AC18F427BEE7
-:10CA00008321A1BD05BB9F7B90C34EC4976B099743
-:10CA10003F9722875314FE2D57E4708A91CBE1E4AF
-:10CA20009591368C77963F22F4C6F3724C0AB7A3E1
-:10CA30000A30215FF643FEE47C59E5EFACC87392FF
-:10CA4000D20FE7FF60F99CED8FA676AA9CBE9CE909
-:10CA50003AC4ED5C4BEE7C18D71D20D7A8F75C0BD1
-:10CA6000E273514E027C62B6213F019FC45568F8C3
-:10CA7000A0A1F90723F28969B0407C6281B248C362
-:10CA800047CE56FFC436BC0BFA550B930CCB58A0BF
-:10CA9000FEAB74D54FB93E7EFFB3D2BE3C0CFC0852
-:10CAA0008AFF44308CAF5D8C91284E3A67290C1276
-:10CAB0005030C7E449C338CC9C0742280E5671B0A9
-:10CAC0007671B8D4965EF7F873687F79BC3F95CAE3
-:10CAD0000329AE33888F29FEBB143CE65CD7FE5C8D
-:10CAE0009E83C7DD4C6E8B7D6D12C6DD5C22EDC76B
-:10CAF000F560B627C94EA9FB713CEE86F13C8CEF80
-:10CB000005EFAF611C0ED7D39618836E9FB04D3CD6
-:10CB1000AE50BF9F56D5FC497F03D49F4E72505CE8
-:10CB2000CEDBD365CC8079CC1CE77EDDA4DD6753FA
-:10CB3000F0D864F4A4A11D6DAAE5F8695A2E16D3A5
-:10CB40007E1363A1259AF3BAD7E2E399FE14C28F4C
-:10CB50006A5F54BDBDAD8E0E7DB6EAEF6BD99D6A9E
-:10CB600085DFAB91DFED6DED8CCAAFC1FCACEA6740
-:10CB700053EC41D24377C02BE83FA8FABAB868D04B
-:10CB800060B4F3835E4AD9F227987F74A62B3703EB
-:10CB9000F8E7B6577AE4AE06F80EA3DB680BBB1EC7
-:10CBA0007DF88389F4E123258CF421945A7D68EA89
-:10CBB000C00F2FC8B8317D9EA1B4073F96FB87A058
-:10CBC000AFB5FD55670E1985E32FC9E076F2E71A78
-:10CBD00077477ABC244395CFEBD3E3B72AEDAFA5D3
-:10CBE000C7A765703D1EACB7411B93DE3EFF4E16D6
-:10CBF000C5C90E33D0F368CF76844A1B9234E7DC84
-:10CC00003B45BAB57A3DAED7D469C8EFD7A1D7EFC7
-:10CC100047FCFDBB7A7D78C926F2ABE0CF39F656EA
-:10CC2000587FFC06D677087F04EBBBA4B6F2102C25
-:10CC300007C17C0FEB912D1FC3F8F63ED593E20E92
-:10CC40002007C4F7D5C0F72807AABCCCDED227122C
-:10CC5000F70DD85F4486FA3F580E8A8B5E31629C8E
-:10CC60000AF538E26B37C83CEA99603BE1CF70AD1A
-:10CC7000C4F9ABF2A0CAC1B5F9E82D13AE4B4D55BE
-:10CC800017B89E8752ABE73BF2677E7F83FCFF6855
-:10CC9000C6F5F901AF66F07B103F23FFBC9A717DAA
-:10CCA0007EC16B19FF915FF036F10FEA4F5CBF8DCB
-:10CCB000FCD01E398FF30F9D4B047EC8C5B8F3DE40
-:10CCC000FE3DEC18A7197995FBF5A0D3C9AF0FF677
-:10CCD000AB272AFA6FB212273890E96CC9E0F24A02
-:10CCE0007E7B614A681FB457D7EBEF4D8CA965185E
-:10CCF000679A0CA5564F58906EEDF8EB7FCDB83182
-:10CD0000FBBDFB3AE97B3CE33FF6F37CD7A30F5234
-:10CD10001DD6F188CFEF3C468678BAD67AC0B48A61
-:10CD2000E3598517798CAADD8C46BB09FC71E13F7C
-:10CD3000E18FD1454D97AC40D7C84C6329C603EF6E
-:10CD4000C2B31614CF30AD74A4A2BE61EABE00C552
-:10CD50003B3E1255D87C70288C63E4932CB06F0056
-:10CD6000F5C30647B6C6470416681F91291E5C4ED8
-:10CD7000E3E6E75598CB6BE4FB640A9C0B70B806BE
-:10CD8000CE0F82D7F0F611462FB369FB51F4CF18BE
-:10CD90001BDF1708ECE7F9867746FF6F8B60C3FD52
-:10CDA000857B079F37633C677491774F02B44BCA0A
-:10CDB0000C2F0D03137FEF1681C6DB6763CC4A3956
-:10CDC000958E6C39F0BC61553EDF37B134350F7745
-:10CDD000B4C3877D32F5760AFF8C5D283E467F9688
-:10CDE00026819973793FC949D7F73ED28FDE4FA686
-:10CDF000F73D9698EB7FFFEEC1CCE16E878F6ECB4F
-:10CE000054F421C685D5FE8126E39B04477B719BA4
-:10CE1000DB95F62D064335033C8DDD98B912E35EB4
-:10CE2000C318E78B928D19A532E73FE6089AEF4FBA
-:10CE30008D372F53BF3EC33F49FFBEE7A7F035A84C
-:10CE40000DBE14FA57EAF924D2E87CEF3B18476488
-:10CE50008C60433F75B63364398B44BA2B7C2DF715
-:10CE60002D750C86F985305D1CAF95AFE57EA5C8A4
-:10CE7000D7B399DA3E6F25D2DF69686DCFF97C8729
-:10CE8000D0FA7EA691E127E8FD591B7357629C1CDE
-:10CE9000E841F5041B7F82CF9B82E0C14172C1381B
-:10CEA0004C72897A19F093D6CEFEED1205BFE704D5
-:10CEB0007EBEA96508F7E75A9279F96226F7DF1E68
-:10CEC00057F0F8B452B674D2E0A17B80CEF0E7C13F
-:10CED000F58066DE84A77B629479CBE34B47C1BCC7
-:10CEE0005AA2586F01F864EDC6B12B176AF8E4F93D
-:10CEF0008DE34B110FADFDC92507118FF728787A07
-:10CF000071E3B883C84778E404E5AD3A9FEFBF5AB0
-:10CF1000B67CDCAEBCCD69CB3F32E657A82646C214
-:10CF2000F704872997F793DC0E7EE6B77DDF11F4CF
-:10CF30003E33C5DCC8FB0A7D4605D1AF38887E4349
-:10CF400083E0323D1CF083A167F09FCAB7AF58D48D
-:10CF500005E3671B05BA6305FAD92CC0F31D99F7E1
-:10CF60009586C5239F4AA60468EBC99C7CD09A0588
-:10CF7000F288FA8BF4AF8BF4F578947382A7943A25
-:10CF80006E46BEA95D1407EDF76496AFC47BAFF79C
-:10CF90002E5C6142A4FF3973DA4A23F47B4FEE1F03
-:10CFA000F7607F46A1E2E028E127F8B431681E6B04
-:10CFB000826039A8FDCA6BE8F38541EF3F1254BF88
-:10CFC0003C085E15042FD1BF3F651ADFBF9C02F4F9
-:10CFD00043C45D4B5EBC99ADEB8656FB25A03DFB83
-:10CFE00050CFEF231B387C6AE383A54BC23470E635
-:10CFF0002F4AB5FC6B52ECC5C418A7A33DFE3DD427
-:10D0000011FF6406DB3559772EF130633AFBBB5BC9
-:10D01000D4C3CDA22A5F0B0ECECDD6EC07CAF5A5A0
-:10D02000184FE978BF422EC5FD8A918FABEDEB4AD0
-:10D030001D9AF9A9ED87FFEBAA88DFBB9A5957BA69
-:10D040009EF6FF94FDBB285EDE76E56A04D2653865
-:10D050009E1FC5FA4E9EB439D99AF9B1A6749C5F49
-:10D06000F3C3FCBEA1DC00F400392F6776DAFF6E53
-:10D070008E8C9CFF02B4DFFDB0381FEDD7E1F9D1F3
-:10D0800074DE686C16F7B77747F6EC723FC0CDA137
-:10D0900093CD18576D7E741895EF8A8EC53E407EED
-:10D0A000F7ACC74AC3B2B03E92F012F7D2D2D27AEE
-:10D0B0009083842C89DE7745D9BA6C473F7499896F
-:10D0C000E1FE1363F6E7884F7E6B213F754A7D2FA3
-:10D0D000DAEF29FF5DC9F0786857BEC844F17FF8E0
-:10D0E000A3FB18AE65C3CC583F6DA152CAB753B964
-:10D0F000EBC7373ECCA17D1D91CEEDECF4471D076B
-:10D1000049665FCBBDE9BEC25125BFCA962C5746C2
-:10D11000168CE3EBB3A9942F85D9A48871E8B7DD09
-:10D12000E4C8CC8A0DB4DBF5A348FB556F9F2DEF07
-:10D1300082FB7B7DB338BFECF4977729D7D8F58A8B
-:10D140007346C2F32EB33417F5C6AE4E3D0499E4D0
-:10D15000B6291AE3ACD314BF19F864FE1BEDF061D5
-:10D16000CF2C91F072CC321FCFC2B2E6DFC40EC614
-:10D1700071A9EFE51D743560BE185377A9AFD63F8E
-:10D180002E481B722B8E37C05FEB499F937F0CF0AC
-:10D1900088ACB52B65B01F6C37F8F5388E18C770A2
-:10D1A000E427F53C1E8B6B4AD7C615027EE8024584
-:10D1B000FE79BBAFF070307CFFAB5743E8DCD7574C
-:10D1C000F217E15AFF58958FE911FF73B885D6C55C
-:10D1D000919290087C63AC3BFE10BC57F1AC89F493
-:10D1E00066C5B3B18FF8B01EE8895B86C1DF7D3EAE
-:10D1F0008B9F07E8583E36970EEDAE958F4DA538BC
-:10D20000DF8EE4636AD6A60EE4A3AE0BF2D1F0671C
-:10D210004D74BEBAAC53ED5D18472C33DCCC1A60AC
-:10D220007C439EFD4517DC6799FEAC85E8EA0D0F4F
-:10D230003FCEE7D53309E7D56A7FB2B8BEF2D6173D
-:10D2400090BD100DE09D81FE16179B683D22763142
-:10D2500093DE1323ECBCBE134B5A0076795178BE93
-:10D2600084F4752BF200F512F25951E4843BF05C22
-:10D27000CBE1F929B40F762A97EF83CD78E8F90846
-:10D28000F43FBF9ACBCF77CFC47C3BB8CEFD37F706
-:10D29000BD6A947C3BFF5BFB5E4F6429F7865AF7BF
-:10D2A000BDF839D0DDF3FBE572BC30C982784AECB9
-:10D2B0004378B9DDCAA410C08B18C5D251FFA8FBB2
-:10D2C0005EE2AFB87E120D02ADD38FD5C994BFA078
-:10D2D00028C2CA9FFF8ADFDB139F2A61B40F16534F
-:10D2E0004BFB60E188578CDF0ACC89F27334C49E13
-:10D2F000F84036F25F08D173FA73333EFD7D2ED2CB
-:10D300006D748C2E9EA0F09FFAFE89FA5B687C27D4
-:10D310000466437B5FF4878CA1489F66D1F5D43DBA
-:10D32000A4374369FF9CD9BCBF1D00F0F47A58674D
-:10D3300033E49BF8C4E4EC403FD3173C9C8EF42EBE
-:10D34000FA438807CFDF4C5B18B20ACF6154EDE097
-:10D35000F7BCA72CFD8ECEE3B224632DC639BF5E89
-:10D3600018C2CFA96F1940FC33C5C0CFB9B0443340
-:10D37000C597AAC214B87B3EC19AFB4B66A4877AB4
-:10D38000FF660FEA15F8FE71151FE837A2DE55CFCC
-:10D39000D1B35A09E5BFCC20B47BCEEB6F59DC3F4B
-:10D3A0009D9268A7F3A2D58F59EC0B92389DC5FECC
-:10D3B000F85D46EBA26A836FF82AECD7C0A4AD36BD
-:10D3C0005C3FB454E07A9B6DC9A03C04354666349A
-:10D3D00047C17389EB33753C3552C9EDC44F46766E
-:10D3E000C81885786CF9B405F96341B8847191EA7D
-:10D3F000CE7617F51B6EB5713BA17C17C79E827C5C
-:10D40000E03747211F7C2A182C3CFF80C300F5E73A
-:10D4100019AF6FFDCEC2A5D9346FABCD30241EF944
-:10D42000EEC2F055F0DEED4C4A8EC77B624BA3EFA7
-:10D430009A80F5AF89A49740981ECB477FEF35B10E
-:10D440001FAE53A72CDD4DF39BB5A90FDE20605313
-:10D450005E3F40F66996C25F5EE5DC5A39C09B10BC
-:10D460008F8A5E7089AC96E2610A1E5BF1ABD4577D
-:10D470002F35113DAA175988CED5F57FA37EABC3B2
-:10D480005BBA203DAAB79A287F87F5263E8FF2FA2D
-:10D490001E830FC1B8CB4D9136011E55C9A3CD08CF
-:10D4A00057350A04ABDFAB5EFAD72E866CDE1F96CB
-:10D4B0001603DF670DF41B9B88F6ECCCABD18953C8
-:10D4C00034743FB3705B04EE3B1F0DF1A4E1395F90
-:10D4D000DF0321763C57A8C6D3CE2C4CE3F7816CF2
-:10D4E0002DE1B85F3D6D6E4A14DAB9C3368F19EB82
-:10D4F0000F3725E19139E6B0D90623EC30DE4CF048
-:10D5000019E51C09FD61FE4081F34DD5ABBBCDC9CA
-:10D51000F0BDDE3771FC9C7BEDE89E81880FE02337
-:10D520001BEA9FC49674B4C3D58696F404A4CFCBEB
-:10D5300002F90BB03E7560FE91D9C8577D411F2A94
-:10D540007C357BCBB679289FD56F9E1A8E783D3778
-:10D550009A99313E56ADCC1FD68FEF19A17DF5E6D5
-:10D56000B5C3197FFF3DE43BD5DE03BCD004F05EBC
-:10D570003387736EE2FA79AFD94B79EFF6DEC518CF
-:10D58000ED9F19D9506C0794E7F7004451B99F56A5
-:10D590001B378EE7DD93B5E7E766637D76A0BE2394
-:10D5A000BE197B9341A1B385ECD258C40BC0DEA554
-:10D5B0005B23902FCEBDB67BCF40948BCD828D69FF
-:10D5C000E54195C3441FAF07FC3D81F8DB7C613822
-:10D5D000E6A19879365C421AAA7852E54DC54B0D02
-:10D5E000E37850F1526354F0A4D43B153C54311FFE
-:10D5F000F5C7CEF6963660FF6FFE40FB6DE7A630AE
-:10D60000819F13E679D1D4F9B9A2F4FBFBF5377108
-:10D61000BE9FA4CCB3CAC6ED62550C93EAFB109F23
-:10D6200039CC6A7E4968726ED311DDF8572972D001
-:10D630004A6F9C078CD36BE0F70483F5D75C85AF0A
-:10D640008ED44FF4A05E9929433FB9280FB649B84C
-:10D65000CFC95E1715FD0D3653F3DDA2578E101F8F
-:10D6600082EE92A260CD62DA08E340FFEB6C0F8A93
-:10D67000171675F5D2BC378CB23103E89323823785
-:10D680007C3BDA838744D253EA381DF287440F4744
-:10D6900013974FE4178C0FB6EA85A0F1D62BE3B5AC
-:10D6A00018EC5E3C17CC1608747F4D5C702EFC1095
-:10D6B000B77714490CF47FCB7BB81FE9B814210964
-:10D6C00054633762BBD9972292D17E1F51E20E4735
-:10D6D000166D8B28D7D0E1A98EBEB3788084F42F45
-:10D6E0000A3BF430CAD1634ABBBD66FBD0F9A80F30
-:10D6F0002E4748785E6A6F949C8D7ED45E035BC231
-:10D70000A2381F1ABB04F007F242F8837AE9495B9A
-:10D71000402ED57103DD3C483768EFE07264A77D89
-:10D720008CD9317C5FF4DAF2D4CF4BFAA95E90D673
-:10D73000E506DAA9F7F21E55E64D32D225600F90C4
-:10D740003FD1DE59943C46C179506FEFDE3911F17B
-:10D7500057136635E0122EB83E180EACA76A8DE856
-:10D76000E7B385717BB4F7D28E86C874FFCC172FD0
-:10D77000B275408FFA073EE0E77977F07B5BAA9DB0
-:10D7800086BFE5ADFC07EF55E65E188EFAF5C502DB
-:10D790000BDD6BEADC2B99BE739A35990BD1FE9F9A
-:10D7A0006C191E2105D627B75CF28891E42F24E975
-:10D7B000D6075567DF2379AE662D741F7BCAD20367
-:10D7C000A30720BD5F32D1F981698D4964E74EAD71
-:10D7D0009FDA0FE73B65511AC13336DCCFE1A53C38
-:10D7E000FFE19445792FA0FF7534C4311CF9D9B7F6
-:10D7F00042B0E1FA6AD086BC47EE85FA41E13D3B92
-:10D80000E3B8BF5A7F7434D2FDABF922E927C7FAD7
-:10D8100027EFC27AC776116F8CC17AC6F608E63553
-:10D8200065C6481BFA05EAF9C20613D7B76715BDE6
-:10D83000704CD113C714FE2B6A6848477FC9B716CE
-:10D84000EC11EE7B9B7D1574BE5BB0D9D701BF9CFC
-:10D8500014648299CD965C5F80F759D6507E9CF314
-:10D8600069161BFAC9F759981DFDDAFB76F5E88BA6
-:10D870004B0587B2AE1A1DCDBFABE24BFDFE19E5DD
-:10D88000BB4C5C5E41FB0ED15232EAB7BDCAB9F166
-:10D89000A3CA784F2D7CE92EF40B4E6D4C8B621A87
-:10D8A000BC9F52F234CD003DB8B99DF59EFF2635A0
-:10D8B000EEE0A6EF542AF1C07DA6C6EE98F733F845
-:10D8C0007ED789B52156CCCF1B7CCFEB8489DB8FEB
-:10D8D00036F7BDB6EBE1E03CB7C1E3695DCF04DFED
-:10D8E000FFEF15D6AE1FAFCA59F0FB6DEE93A75EE2
-:10D8F000DFF92ACC4B86F7BD77DFC4E8BDA1A1FFD5
-:10D900007A03F57545A3C586F7EF8F8548B41E9257
-:10D91000F398B401ED8C558AC4F5FCB17DFDE8FCAB
-:10D920005FC5978CE4AA628BE8C654C5EFADC87892
-:10D930007C30C0F76F31D9F1FD532B57DCC5C54C96
-:10D940009F67219F71F99C0EEB248F2DB02E0A5EEC
-:10D950002FCD5CB589EE11FE5CEB25358E148CEF76
-:10D96000825EFA7C0BC1F7E77601DBE4F76D8BEFA3
-:10D97000B3752E5A177D5B57496541D3DAA2040966
-:10D98000EF531C796C10CA4D7824C543CED6D5D23E
-:10D9900026DEB7DBFB5DC1FBA16F8745DA505F7CFC
-:10D9A0005B375FB95CA0F089C297B76C6916131832
-:10D9B000B5DF3108DAEF0C8BA4BB2EA98EFC48B47E
-:10D9C000F32A5D83EF37ABF33BFD10A7AB3ADED311
-:10D9D0001BA746A0DFD9BC3A7A4701F4278746DA6D
-:10D9E000D0DF9EAE9C7F39BE8AEB9B93D6C817468C
-:10D9F000E1F99935E3BBE0BAEE7E93CF6C877EED1B
-:10DA0000EF9444E07AFF1BA33702EF1B7F03ED3D49
-:10DA100068278C6E11F5DCC06246FB78033D462614
-:10DA200025D19639F145C159A31BE97AC67369F727
-:10DA300055E4A3B3068A770166765F85F6F6F09E15
-:10DA40001427BCFF2DBEDE64FFEAC4EB83EE2D3E3F
-:10DA5000D18BEBA5136BDE1843EBF3F5261B8EF38E
-:10DA6000DBF57FED82E77066327EBEFEE44681E63E
-:10DA70003113F8312409F5038F83CE04BD6F15DA15
-:10DA8000F261D1C67AE2C399C08716F4D31C3C1F59
-:10DA9000F34CCCC72CB136F93F3A2B7C370BF80E40
-:10DAA000EFEFFEDC793F96F50A3EB7CAF950A5BB09
-:10DAB0008A1795FE013E64BAFC82514D7D0A1358C7
-:10DAC000401FA8F73B98D1BB1CEF69CC13C31B3197
-:10DAD0005FD57E63ED1F286F8B6C641BC89EB34CB3
-:10DAE000CC97374FBCC98EF1C006736D6B5E17AC17
-:10DAF0000FCEEB2286F1F74B303F31CC372C3B89F0
-:10DB0000BE37CE661F86E836C578292E2016191C2A
-:10DB1000742FAFC142EBE6603DF48A42DF3BD07721
-:10DB200040BFA7173FAFADDEFB534B30343D90DF16
-:10DB30004B42A32E4BD064FB2B9FDF89FBB4258384
-:10DB4000A27E9102DF6FEE75E44EBCB751D22F6A10
-:10DB50006B32C0BB5FF93BAFBF392ACF847E80F008
-:10DB6000F59D43D16FECE578B397E63B6ABFF0FCD7
-:10DB70002D7CFE79A2EB9D5E7CDFB402E97D5E88A0
-:10DB8000E0F9DE527D140755DFFB586087DF16028F
-:10DB9000B0D7C41231AFC1DE5E5C9F7654C6643B21
-:10DBA000F6F0EFEB9F2385BEC375A6B2FF63B04AC4
-:10DBB00066F4FF9C76B39DE757644E2BF8556315CA
-:10DBC000FE2DB75E194AF6B796D92D98C06489FE26
-:10DBD0003E5656E0DEDE9A1BB9B7C7649E87AF415A
-:10DBE000C9C3D7D13D4A61C7073FA07F197C7FAA2F
-:10DBF000DF5F5ADE443E19037C85F622B785C36396
-:10DC0000153EA9DE369AF23DCFF9D8E4463F61864B
-:10DC1000E28FA5BA3A3109DA5D06F945BD70768C16
-:10DC2000271DF5C7893AD6989A86F12A970FE9B247
-:10DC300037E903CA8B76624D4304FA3DE7603D3114
-:10DC40000ABAA852FC7B7645F4DC867E7052D6BABE
-:10DC5000651A7EFBA117B7FF67933C89B8BE919305
-:10DC60002C3C5FE395DD94E7B93879441EC691F604
-:10DC7000D76D6747D302EF75741F65A06108CBD6D7
-:10DC8000EC4B8E31B67F4EE3A49A4F733DB7DF164F
-:10DC90006323E5D10252D6D613ECA4B8521CF22865
-:10DCA000C687A507095E3C83D9E81E6B609F8EEE90
-:10DCB00083AAF477D8AF0EC5766380FEA86F0C56A2
-:10DCC0009F116167313F9F920584437DA2D27F9867
-:10DCD000F8C863488739CA3DAE39422D874D563A58
-:10DCE000E71AAC1F31AE59467A53DE5380FE18E86E
-:10DCF00049CAABA0E84509FE477991F2D79AA9D95C
-:10DD0000B5F322ED29F80FF4634EB63E8FB84A27DB
-:10DD1000D5BFEA884EAA9E047AF5BF117AA979CABE
-:10DD2000E63CCBE39D739E9D1AD797F0061287FEC3
-:10DD300050DC1F29AE325D99035B134D7C6C1AE2F7
-:10DD40009450DF8EDE9EC024783463BB40E75B478F
-:10DD50006D8F2638C21FCFF32A29F67EF48B5D879C
-:10DD6000607CF2D40B5FCCC5BCF7A37EC3287E6C6D
-:10DD7000080DA37C13E210258F8318F63EDE63BDE9
-:10DD800028196BD15E39599BFC0106A2FF5E7E4EBD
-:10DD900016567932A713BFF737671FB7F3730AF91F
-:10DDA000BEE0457C03DA5F2C15294FD3D3A139E4BB
-:10DDB000BF35DC69A2FB114C767C82EBAA090A3FD5
-:10DDC00058E26061A9A1578804F2AAA1CFA3218FCC
-:10DDD000BDEF82FEBDB0EE12BA811F9B19A5AB3715
-:10DDE000CA21DF60FE58539C6873C3F8C3EDDD742D
-:10DDF000FD39C52A13C653988BFBD12A7F31F1AC6C
-:10DE000091EECD0FE6F92BEE9CA0BF27691A7C613D
-:10DE100028D99BC17AFFDB798DBC4DF3557ECA6250
-:10DE2000594A5E7AB2FF170FF2FB211273AE52E528
-:10DE300005F53F78374F237EEEDA6B626E89F0F797
-:10DE40001AD65F942D368C07B4FAE1A9F05E0C1A4D
-:10DE5000492BF139E605D5CE13F3826AF182794177
-:10DE6000B530E605D5B6C7BCA0DA7ACC0BAAADC7EB
-:10DE7000BCA05A18F3826ADB635E502D8C7941B5E1
-:10DE8000ED312FA816C6BCA0DAF69817545B8F792F
-:10DE900041B5F59817540B635E506D7BCC0BAAAD62
-:10DEA000C7BCA0DA7ACC0BAA85312FA8B63DE6050F
-:10DEB000D5D6635E506D3DE605D5C2981754DB1E7E
-:10DEC000F3826A61CC0BAA6D8F7941B530E605D536
-:10DED000B6C7BCA0DA7ACC03AAADC7BC9F5A18F368
-:10DEE0007E6ADBB7B0856968C7DE4A72EDCD8EC544
-:10DEF0007DA793C4CF87EE037E4639DC3BDE46F92F
-:10DF00000B6F709DD892ADAC5B14FEBDCCC226E108
-:10DF100039F48EDE57F9F3257C278FECC112E25FCE
-:10DF200016DE88FEDCA34607DD87929BF8FD44667B
-:10DF3000E47EC03C51F17F94BC10F34489FC00CCDA
-:10DF40001D6CD48CA7B3C3CA8C1A3C4417DB747005
-:10DF5000AC334ED7BEEB0449571FEFCAD4D5275474
-:10DF6000DA75708FDA7C5DFB9EF31D3A38492ED648
-:10DF7000B54F59E2D4C1698D1374ED3356B974F5B8
-:10DF800059EE4A5D7DAF8DB53AB877D37C5DFB9B8A
-:10DF9000B7CBBAFA3E9E25BAFA7E7B1B75705ECB74
-:10DFA0002A5DFB0187DCBAFA02EF465DFDA0934DC6
-:10DFB0003AF816DF765DFBDBFC1E1D5CC8F6E9DA7D
-:10DFC00017593FD6C1C36C9FE9DADF1E7744573F2C
-:10DFD000423AA5ABAF3AC3FD7BD600EB038C538628
-:10DFE000F1FC1AB33DAC09FD8B91991774ED4D31DD
-:10DFF000B05E00FEA9067D887EDFF79D12291F33E3
-:10E00000AB8DB0E3BD6F7948ED1FB4F7BC47DB7F44
-:10E01000D07DFFE9D0084F08AD2FAC646F6FE9CD1C
-:10E02000EF9BB5E61351EFB3331F8B8BA190900F8D
-:10E03000FD23017F6109E00807CF0B0D7E10F94F2A
-:10E0400036F08BD0DF6C5D17199292D02E8706FCCC
-:10E05000E2EE5735795EAEE5178FC46FE7519E5EED
-:10E06000476F2867366D1A8EEBAC194C5E8CFB89B6
-:10E070006A9EC5FD21FAF8965A8EB0027E35DFDB26
-:10E0800017D2D8BDEF4FC8FB08EB596ADFDAAF12E1
-:10E09000FF1260B27334FD3F06EB3F23C875631D6A
-:10E0A000C81FF8434FD4D9085E591747F05375126B
-:10E0B00095ABEA32A97CA6CE4EF56BEAF2097EAEAC
-:10E0C000CE41B0BBAE98CA75754E7ABEBE6E02C167
-:10E0D0002FD4B9A8DC585749E5CB75B554FF6ADD94
-:10E0E0007C825FAF93A96CAA5B42CF37D73512BC55
-:10E0F000A56E15C16FD6B9A9DC5EB791CA3FD535FB
-:10E1000051FD0EF0DF10DE59E721D853B797E077C5
-:10E11000EB5A087EAFEE10C17BEABC54EEAD3B4932
-:10E12000E59FEB7C54FF973A3FC167957D8879BDA9
-:10E1300005DD7D3C1536B263DCDFC3BC1598872155
-:10E14000DFF4ED4FE5C70DA6C369A57FD310709727
-:10E15000308EDC2D7D5D83665DD1D09BC72DEB0DB0
-:10E160003C7F4B7D37666B20BFDDC1F8392DEEB7A4
-:10E170004FC77F49F034A66E0FAE372A6A799EF2F8
-:10E180003CE4C74CE2C7BFDCD03A4D59176C4E7126
-:10E190003E81FCC8C2DC9F26E506EED11F4871FD1A
-:10E1A0000E9F5FACBD7F0FB69E6EB3A7E347465B85
-:10E1B0003CB198FFCBB74FB4AF933AFE5E8D72FF80
-:10E1C000A1C3FA9DA7BAA3BD2AFE51A4B8FE7E53EF
-:10E1D000F804DCE77F51C1C78BBD0DBAF2EE54E7FE
-:10E1E0000BBD717F3FADF6850785C0FDFDB1B8C49D
-:10E1F00007F92E6112E5C119CF1CEFA30B7E27385A
-:10E200008208DFCD642A4F24BBFE88F3B9071620AD
-:10E2100008BB065A12DB9B4FF078DE52C6F39632EB
-:10E220000EB59C93EADC8EFD1D4B73E8C6F3A292FB
-:10E230005F680CF33D87E3FAC73B178E0B29017C1F
-:10E24000B7C653582DE5C928633C9EF228E6C58819
-:10E2500009E4C550D70F65FBF8EF1CD11FDACF7961
-:10E2600049B4BE0DCE9BB1B87037CF8301EB31BC42
-:10E27000FF5BF6C02F48FFE2EF41E1BDDD799D0E67
-:10E28000539E19EF0CE0D504CAABC1F3DEB8008190
-:10E2900009945783EA859BE0FFF1382E6BA691C65F
-:10E2A000D789F29D3C1DBA9FF2D2604CC1D219F3BE
-:10E2B0001E27D13CF73B2F70BF3BC647F75337A70C
-:10E2C000B8BEEACDE3E44FF5C33811F2137EC7E6DA
-:10E2D000A6F36BC04F660150343D06F8A91D7F437D
-:10E2E000E59BD9CA3D1CF539F0E309C4F7B76F0DBA
-:10E2F000C844BEA9D9592021BE1B0CFC3E9DFC6719
-:10E30000655F50F93D0431327B2DDD3B40671CE9F0
-:10E310005B104EF70E9A45367F533BFAD59AC3E908
-:10E32000BC3F8EE7936C08DA9F147238DD05A5DDDB
-:10E33000E877F7511EB2D97B79BC9AE57AB39DEDA7
-:10E340009CCBAA99FF9BA75235F3A8D97E849FE75F
-:10E3500062DE6CED392E49E957E53FD11CEE5A1BC0
-:10E36000A61D5FAB1C5872F2480E8EE3BDEE31164F
-:10E3700029F26E817E1FEC5BCC2FE3FA838DCE03F6
-:10E38000AAE702A7312795D3C17222DF3BE51574B6
-:10E390007F7E266BA2E7B3F3A726225CC37C43E310
-:10E3A000707DB4A4FE7D0C078D6F5C312C1EE635AC
-:10E3B000CE3DE57D2C4BD60BC76589E4280EBFEF1B
-:10E3C000156A177583EFDDFB6AE1228C5B8F1139CB
-:10E3D0001DD8879C0E65C0CF6254DBF981DCF4CC7C
-:10E3E0008925B9A1F1AB7253B68039F0FC817A3F2F
-:10E3F000A4558EF267FD3D01F770C09F447EADD9F4
-:10E400006989A2F529E699417DA5C8CF2223F72F76
-:10E41000654C6D4AFA93FB1B268792CF8B717F6404
-:10E4200096CCD763A74D5CDE4E7F15EE46FE9ED799
-:10E43000E9F544920F932A1F3F4EA2F33D0CFC8F47
-:10E440005BDBFA1FAD7966BA33F23758A22BAE6F99
-:10E450004AC09E9F36B8FB47F0BCFC0EC4D79E381E
-:10E46000BE7E9E857968B0BEB353C278E9E9582B69
-:10E47000DD170ACE73C6989DE66752E607239B8098
-:10E48000FEB44589AB3504CDF7FB90449AAF54C830
-:10E490009A183A16469B3C15E5FE416E27E675FA3A
-:10E4A000B50BBFEF0D61366110CD87E2B1B2813996
-:10E4B0001B787C96E637DF68B5E1B99CC55344AF5D
-:10E4C000407602C689F1BC18AB9DE75555F36F073E
-:10E4D0008FD7A11F9F3591E1FC1C22F3850CE2E34D
-:10E4E000C5F1C9400FA20FC05334E3837EDD94FF12
-:10E4F0002754B2A11FB6F75F0FF2F8723DF71F6104
-:10E50000FC1B893EF130FE846B8FDF842C0AE39F75
-:10E5100093C3F55403EE208A68673B93FE2D09717F
-:10E520003E807C98EA5AD67D0EC6350A2C768CDF62
-:10E53000B12B0DDD514F853189F26A8D71F0BC5AD6
-:10E54000D0DD42E48712CC5B67233FE0AC360F1B83
-:10E550000B8AAF015928BE3A0EE36BFC2ED17B1813
-:10E560009F1DAF9C6FCE625FAAF8A3F89A88E3A3C1
-:10E5700078B58BC66941CA421982711EA2839BE697
-:10E5800011CA3C4A3CBB85FC83150A1F0E3AC4F9EC
-:10E59000705018D7773B8F30379EFB6AFEE1AEA2F2
-:10E5A00070842F18494F019E281FE0DB7FE571A979
-:10E5B0009DE78E27E03E4CFD0F7B12D04FDC697249
-:10E5C000893530EE9D0516DB027B20AEB1E3501895
-:10E5D0008FEB2871BE5B9479EE602D0D35509F1F37
-:10E5E0002F328C03E61DF484A23C0F54E2B2C1FA30
-:10E5F00070F025B3EE772D4C363D9CCF34701286EB
-:10E60000C8827EFFF306D7B9AFE574F0BB9F2763DE
-:10E61000AE6B3F147FCB87CE27E438DFCC21BB36EF
-:10E620004E54F02E20BE400F34239D9FA936D3EFC9
-:10E630001A34579BE3BD9AF135CEF847029D73FE1D
-:10E64000D73FC86EEDCA53F3E33485E073B31C4E75
-:10E6500071B767AE1828EEB6BAF26B5A9F34E6333C
-:10E66000FA1DB1C62BE5E4075C2E66B889C4EA6FD3
-:10E67000FD3F95083F7E8B95BE173CFE6DE0CF7B3E
-:10E6800080505BC19FC7D20DFEBC2703FDF4382A22
-:10E69000D7803F8FE533E0CF63FD2AF0E7117E0A94
-:10E6A000FC792C57823F8FCF9F007F1EE177C09F60
-:10E6B00047F86DF0E7117E0BFC792C1BAF7C5248BC
-:10E6C000E39ACBE8DEFE82D088A5E8677493C3C9DD
-:10E6D000DFF8C8D1B793576367F3BF34E8E8DCFFCE
-:10E6E0006027DDEF9D24C95141BF47D32DE8F76A6C
-:10E6F000F4BF6F9350A9FF7D9B7857DFA0DFC3194C
-:10E7000018F47B3943827E4F47FFFB36B75E1AA76A
-:10E71000AB1F7C56FFFB36038F95EBE0C7957C99CA
-:10E720002A1DD3A5D742902F56578E8B64EDF8172C
-:10E730006A89EB2B8F667FF5C987C409EDC59123E4
-:10E740006FE6F6FEDDAF2CFBD6033E77B14827C659
-:10E75000DD77390CA4979E59154671588B77E029BF
-:10E76000E49F5D0E2621FF3C736548271C4F2190D6
-:10E77000119F275472BDD0ED6689F839A1D227E2E6
-:10E780007DD1DBAEF8ECC88F4F46F0DFD9827EDD5D
-:10E790000BA0BF7747F7CFC238CE3361C0CF286F09
-:10E7A0001E5F682AC091570D0CF523D84ACAF32F73
-:10E7B000FF3E4C398F7A95EEC345A24E07BDB4ABF0
-:10E7C000927F3FDD7B2554EB0F3DFEE3B5F0C28821
-:10E7D000AF3AACBF6366328E378077508D50A6B3A8
-:10E7E0004AF618E2A38ACB4F63A581E4E932C81345
-:10E7F000E207664D74617838215EFB3DAB9E0E5595
-:10E80000C94B719ECFAC34D26ED930F1D57D37C3B0
-:10E810002BAB0F8AB4CD2ED97CA1EDF977EAB8578E
-:10E820003BF8FCA2ECCC80762E0AF0E9A6FD6C7BCE
-:10E83000BDF6F7AC7EAFC8E7EFF0FBF0DED30A3FE2
-:10E84000AC54E47398B866443A8E239FEB6BA0A750
-:10E8500080F7B12E4F63F43BA2BF2B4DEED45E9EEA
-:10E86000EF95CA389E53E6B54691FB67B05FBCC7CB
-:10E870002E9615623FAB9D8CF4F86AC7D7F518B792
-:10E88000BB5CCAFBEDF9885740FC76AFF509D87F31
-:10E890008FB91E2ADDCA38BB55B650BDDA9F6477E2
-:10E8A000737EAFFA9AED85F9E2215B91ECC559CA06
-:10E8B0008FBADA68646887519F217CD96AC43312A1
-:10E8C000ACDB8C630CEF33378619699F62F5ECD3B0
-:10E8D00004AFB0713842AECDC6F3176F29F38990FB
-:10E8E0006582DD41F3499726476A7FCFF55A7AF072
-:10E8F0002D93CB7011C631E06F22FD7E4747EFA903
-:10E9000076F65AFAEA4FF88F78B20B0FDD8CEB6788
-:10E91000D94976415DB76D1DC5D76D2B42277D88DE
-:10E92000EBFE52858F9E0E1DF33ED61F18C17F074A
-:10E93000A779C4ED3DB47A72BB32EE6D0ADE0B8E60
-:10E9400039BE9A0BEF8F745A189EFB18293B7AFC3C
-:10E9500002E15122E5351FC01A1BF05CC5C13C55D0
-:10E960002E9CA1287FEF8E9ACA0EE1778AB99DDF8F
-:10E970005A3C9E9E4BCC39B237BCFF498B91FC1A56
-:10E9800078FE9372B94F19CF070A1EDF57E8B05BC4
-:10E99000A14333DA132877A13D217B6157EC05B7FA
-:10E9A00027DBD09E64201DB83D69417B9281FB6FBF
-:10E9B00013A8DD5FD09E40993BA288F6232F232326
-:10E9C000913D99CD16035C08E317DBA1D71DA9A2E1
-:10E9D0008E3EC5DD4375F4191E13AD83878625E889
-:10E9E000E021C6141DECB87253903DE81B640FF48F
-:10E9F000F624FFCB21BAF6FD0FDEA1AB2F718CD729
-:10EA0000D58FCD9FA8AB1F6D9FAAAB9759635104BB
-:10EA1000CC37EF4B467E685EA73522ADAB957D3493
-:10EA2000D5DF027A923F56F05791E456C5471E6BE8
-:10EA3000DDCF33D07E9ECC243CDF495B96C9BA7AC9
-:10EA4000F2A30E9A9C09780EB1BE04F80FCF231ED4
-:10EA5000AC18C5683F1EF818E42ACF79E24BCA3BD0
-:10EA60002A96F5237FE99251B7AF5610B43F36206E
-:10EA70005BBF7F96778DFD33EFCDCAFE431BBFACE6
-:10EA8000FDDF450AF6CB40AE441CF7D3A1937623B5
-:10EA9000DF7CF819B757CD9F3DD51D9F7F824DA1D3
-:10EAA0009F7DBD9FEE8E7CBFAF553E5CA15ABF6B74
-:10EAB0006B26FF1D9A370F266FC7F546AE4920FD1E
-:10EAC0009F9BF5249D47BC7CD040BFD3995E5C13CF
-:10EAD0008A78D97A685D98FE1E95464F909FAED190
-:10EAE0001322FAF751FA7A6342004EE6C4C1F6FFE8
-:10EAF0001710600A2E008000000000001F8B080025
-:10EB000000000000000BED7D0B7C14D5BDF0D99DFD
-:10EB10007D259BC08604DD400293F030228F0D7965
-:10EB20006D42122621D0A03C36801004E384A0D090
-:10EB3000566DEA137B6933493089014B546AC1FA37
-:10EB400058B1DAC7E7FD9A5A0950B15D9E55A1B296
-:10EB500048B051515779685BDA0F155AEFFDF17DD6
-:10EB60007EFFFFFF9C4976864D88BD7DD97B939FB4
-:10EB70004ECECC9933E7FCDFAF73608CB1CF24F875
-:10EB80001F9BC0422E463FBC3DD5D42E62A1ACE8AF
-:10EB900076B9A97DB5A9FF0253FB3A53FF1586E765
-:10EBA000AF642D1CAA26C0DFF833FDE2EBB606C623
-:10EBB0004257F4F5CBB30524DFC48BFBE5775BFB51
-:10EBC000C685FF768F5B653D9FC25857B714746644
-:10EBD000C075EC2AA6E5C238DDD620B3D0D5CAE090
-:10EBE000F92B3DBCED64C10D53E1F9B66E9BAF5DF1
-:10EBF00066EC45FCAE93B1F1811B860612192BB170
-:10EC000085637EB7F49CF1BBAFF42C18CA62F4D3D1
-:10EC1000AFBF10E3BED0E0A275ED6CF0505B7F2E6D
-:10EC2000FDDF7347E7E3BCB3241FDC86F997273386
-:10EC300058F72F2FAC74E3B8305FC6463036A33395
-:10EC4000ADBA712C63320B2658A1FFB62C89B5C31F
-:10EC50003A738FF1EFE7DA95644F0CB8326635C23C
-:10EC6000FFA2F1E007E174C11AC4F1F68C5BF2D0A7
-:10EC70005418FF60B7C4703E0E75B53B3009DA3DDD
-:10EC80007C5EFAB8D33FB5F6E119FE2B3E136F80D8
-:10EC90004BD1C96186E7B9572E1C8AEF3BE4F9C90D
-:10ECA00008DF4BCD93B178131D0D33B54718FA8F9C
-:10ECB00097016F93FAC7C37681876D8807B86E8F07
-:10ECC000F3550762E06DDB78E7EA60D43A1B7C40DD
-:10ECD0002C7978B5D235F74AC91702F89CEFB6FA05
-:10ECE0001078059E7AA93E06DCFDC78D7492DF1D63
-:10ECF0006F800793960FC8076B8E37B6EE8BEAFFCF
-:10ED00000D5F62CA6937FC51C00A68FD9778FFCF72
-:10ED10000D5AEB3E3BD031634A27AC93552E64AC81
-:10ED2000B0FFFE8C35D1FA7438B2CA64C65207837C
-:10ED3000A70E7AEF227CF5F37EDF381A63C3019EBB
-:10ED4000005E9C57EBE4C0C33E1C275225E1F71F31
-:10ED500070DF2A45607DDF75DFBA17E9F3D07B0EDF
-:10ED600019F97AF77B5D6978FF60F6F634A4FB83C6
-:10ED7000F04E18DACC065883B643BBDE8DF4F54A64
-:10ED8000F76DC43F32AB3F3889CB015F3B74DB9EEC
-:10ED9000C5E9B0BF79BD24E4CF01C1AFFB04BFEE2C
-:10EDA00069F0523BD420D3F5170D59747F57838FE8
-:10EDB000DA3F6FF0537B478342EDAE864ABA1E6955
-:10EDC00008D0FDC30DD5D4FE75834AD76D59B7570A
-:10EDD000A03C3A9F0600807535B9E7D962E173B669
-:10EDE0002C19E8E64B5EB781AE667A920DED19AE4E
-:10EDF0009186FE656C8CE1F9F44F27189E979C9DD7
-:10EE00006A684FFBB0C8D0BF30526E6817F45C6DB3
-:10EE1000E8BFA062A1E179A07899717E5202C997FA
-:10EE20009D6719C9E579B97586E73BF10F94C31F52
-:10EE3000B2A09681705938A03CD5E5F45E819FDD83
-:10EE4000023FBF14F8E942F8139F571AE09D7FBCB8
-:10EE5000F39A29C0AFBF6A584DCF1D5943CF49F02F
-:10EE6000DDED67E365947BFB1BEAA9DFC1B71F24D7
-:10EE7000BAD929E671D0CECE4929D8B6C84D968BDD
-:10EE8000E793D763E4F3F1953790BCDCD9DDE44632
-:10EE90003ADB115930287DA7F7FBD5B90533902E01
-:10EEA000FCDDA0A3322EADF7747D75A9F1F57EA827
-:10EEB0004F63E909F3B857475489C13AB6F7D43FCD
-:10EEC0009488EDD0972519DAF93DEA0CC4D7AE2C19
-:10EED0008B47B250BF190ACEFBE46DD7E0FD1DC7CA
-:10EEE0006D569CF72190FFB88E9DA06F9DA87FCF97
-:10EEF0006D754F06F8BFD8F3E03593A19F76C6E64F
-:10EF00001BC72E9EC7A86C89E4C2B6894EAB650AA2
-:10EF10005C8FDB5808E5974D25787645B6D215F518
-:10EF20001FBF5F4FF8BA32DB43EF6D3FF95C32B67B
-:10EF3000ADAC9EE4C08BC7AD95C118EBBD12BF034D
-:10EF4000B223EF4283DB03FD0F1C5FE146B9B2A39E
-:10EF5000878F9FB75673239C0E46B626E0FD9D59BA
-:10EF60003FA371774FE276C5CEE356A2E79D13AF7C
-:10EF7000D8E0CBA575FA1076703F01DBDB7A6CD454
-:10EF80009699CAC2292877A460BB05D7B382BD066B
-:10EF9000CFCFFBA420F27D1ED31CC0A26CDBFF6B85
-:10EFA000599CCDC1CF6C9731760B7F994D3B6BD47B
-:10EFB000B3453D463DE2885C383A1FC6EB3AC3E5AF
-:10EFC000DB8C4F8D7AF7E01B999B028897337C3E50
-:10EFD0003B8E2F58548572E77989DA8D93563DFA26
-:10EFE000757CBECDED73C2F7BE9CFB644B327F7D5A
-:10EFF000C85C9847B19853DE19E33C0E5E59C73E92
-:10F00000C6759EB4D13AB61DE7F6D5F92CBEAE9DB5
-:10F01000BE3AF66DE42F617FCD78FBFBD74C4A41B9
-:10F02000BAB0925DF182EF67C939289F3C9281EEB8
-:10F03000004E4437E7BB198D031245BA15C629F0B7
-:10F040003B3DED1EE4C70EA29F836FDB7C4DF8585D
-:10F050003AB4F736E89F375262B8A22F074DF2F262
-:10F06000876E43FB16D9282F9DAC6A40BB61DA59E5
-:10F070008751BE7EEA308C57C0A29E133EA39E6786
-:10F08000FC0576895D5D8676090B2F1A94BE66AC09
-:10F090009EE4C50EC67CED404085574A0AC1EFB8D4
-:10F0A0008BE057F0DDAA698CF4B43A0DF981883110
-:10F0B0004A2F5FD24EF1682C255F7C0AE980D94E39
-:10F0C00047A07F1B10C967A8BB851E378FDB9FBE7B
-:10F0D0007FC03D84E47D718585F8E7BBEE5749BF6D
-:10F0E000779DE2FA1D7F224077D7E21FA8EF4F39C4
-:10F0F000881E5E986D2139A2DB0B0B996247BE9981
-:10F10000E73F67BB1FE836E0AA99740B5C5F78A302
-:10F110006B24F2EF0B6817907CE8207E7668895AA2
-:10F12000328CB3ABC7497CB813F8CA85DFDDE52460
-:10F13000FA043E5D8F76C2AE30E7A3AEB3566EE7FB
-:10F14000ED72139FECFE8383E6DDB5D6CDFD8B33E8
-:10F150000E05EDF09D6B13E9FDF17262C88676FC39
-:10F160001A3E7E8FC0EBEB02AF07859E7A19F594AD
-:10F1700013F5904CD7FDC28ED88B768413F5995F2A
-:10F18000E833AEC79E3FFBDC5B48FFE777C591BD28
-:10F19000399E6575E2BC762538689E66382F558D98
-:10F1A000F4BFA4DA682FCC9968A4FFABC78E34B43F
-:10F1B0002BD3C618DE9F957295E17945428EE17991
-:10F1C000B96D9AA1AD5C30DA0BF3FDD718E9498926
-:10F1D000B21732F1FF467FF1DA687F11E5C8D90531
-:10F1E00064AFEDEC117AF964E65075E2C5FCB3F357
-:10F1F00024D79FDB8F7F9CA8C6B01F3E14FD7E27BF
-:10F20000F07146E0E3B7A39493D94097E74F7EECC3
-:10F2100000A5D12F1DEBEFEBEF7D183C31245AAF49
-:10F22000A74B32D1B7DEFE43D75BE3F1F960F902B9
-:10F23000F4585B04F07CB794D8D10EAFB4DAEA9FEF
-:10F24000C0B6A6D9D8D3B9048E2C1B3D9FE0437B12
-:10F25000A539B1FE07F87C5BA3D3B33505F9E85BAC
-:10F260003FC1F61A6005275CFF1C372AC880D51CF1
-:10F2700053B9DFF28C3D30D2877AD31258760BF433
-:10F28000D7B6387C4FCB17CF2761AA4567F61DA8A4
-:10F290008724C1F7FF695113A6C27DE5590BF163BD
-:10F2A0001C38A2380F270B8490FED96A6519F20723
-:10F2B000B302FFC0F51B39EA30ECCF14267B601C8B
-:10F2C0001215F03D4BF8C07F58605E7656AFE138BE
-:10F2D000CED52061809F1FC85653A9BF6D018DFFF9
-:10F2E000FC5CC6DA492106A89D7B17F3B427C1FC54
-:10F2F000986AFD18DACBC0CFC7EF5BDD37931E7A73
-:10F30000EBB7D6A014C35EEA85F3CDF633119DCEDC
-:10F3100032FBEEEF1078ED1274B12323B02C965F20
-:10F320003815E182F6C5BBF324A4AF5CD71005ED18
-:10F330000A58A05405F27DC7FB57BB6B63BC37333B
-:10F34000B776EAD428BAC80D774AB509080A4DC27B
-:10F35000756D83BF715D3FEFB68610BFE7131C2448
-:10F36000B7FB5B4761C4A8870B7A8C7E3763CB3DC4
-:10F37000A7AF427877583EBB2A9ABE94F5D1F4F5F0
-:10F38000FCC5F44570BEFB6816C1B5D9C2E94B0394
-:10F39000FAC2E75A793DD197666581E65CA2377A71
-:10F3A0007F8DCDE57182845C353593E8A62B71CED7
-:10F3B0005B2199BE376601F97135C28FAB2139FFE8
-:10F3C000F23190F331ECE8DDC7168F8C00FCB68D7E
-:10F3D0005B3212F9BC0B15C0089C7EFE52B42F7B29
-:10F3E000DB802EB20367320C55C1F3DCA50AF69F11
-:10F3F000ADB7F378FF32DEFFA6A99BB668F8FC7ABA
-:10F40000F19C2DE4FDF5B656B0B40CFBDBADD47E1B
-:10F410005BF47FC8A7AC42BC3D90ADACC66B361A5E
-:10F420002B703D3D45F90AD2E9AAA98CD67BD714A9
-:10F43000E5E6E8F6CF262BB746B7B7F5FAA71DC223
-:10F440003FBD85ECD2977B16905E9259E01AD43B73
-:10F450002F87791C6ADBD881FD9F5F097B7EBFF017
-:10F460007FF6A23C223F88FB3FBF147AE545A157B7
-:10F470005E107A65A7D02BDB857FAAFB47AFA27F02
-:10F480000AD743C23F7D05FD25E8973BEE04D91519
-:10F49000E73F65C4BC4DEE5F48B1E46A659AD17E32
-:10F4A0009B9562B4B72A128CFAA6DC66D437CA855B
-:10F4B0004C43BBF4DC0443BBF88CD13F2D3A596478
-:10F4C00068FB8F971BDAF9DD579BF4CF42C3F355E6
-:10F4D0005365C2E35C9FD14FBD26ABCED0AF0F6F5B
-:10F4E00001613F3C968076DCB6B175026FDC5ED080
-:10F4F000F1D6F54F83B7BDE49F9D3FCB445CE171EE
-:10F500002996FFF9AF8FB74BF05B02B7F32EC56FAB
-:10F5100007847ED827F4C31EA1FF43C28EFB8588D3
-:10F5200007ED42BC511C88C7837620DEA2E211CFD2
-:10F5300023DE9CFDE3AD79EC439CDF4EEA78BB35DE
-:10F5400026DEBEE435DA77333D46FB6E86CB88B7E0
-:10F5500032668C074DFFD488B792B3C678D0B40F0B
-:10F560008D782B8C18E341053D46FB2E2F6C8C07C4
-:10F5700099F10676404ACE20F0067E924274EB1353
-:10F580007A3FB890F451CB5CAE1F810FC9FE7EE686
-:10F590004EB003B2FBE0F1BCC97F7ABE1FFD3D3E19
-:10F5A00087DB355D6FD5105CF3507FC7E8972DFA88
-:10F5B00065E778E8EAB4312D7E2A4D73DF08988F2D
-:10F5C0006D2CB77B6C891B18D98B406ED6FC3E3BEB
-:10F5D000494A08301C1FECA5EC9CBCBE716D9E7A9C
-:10F5E00086F253723EB81CD7C524AB8FF4AEC93E29
-:10F5F00062AB3DCA6D78FFB621BE7680C54D3949F4
-:10F60000340F2FEBB4A39DF18D1CA508C795667030
-:10F61000786C4B071F1EE0B12D8EB73580D7D3D045
-:10F6200096862E27F87501BCA46C1C3F85DD05F37A
-:10F630005A98E3E07058CA843E7DDAA80FD1608002
-:10F64000F633F1BC7D6DCE334BB5B43EFD5BF3B309
-:10F65000AE2D1A8C333E61441D9B0CE36ED686A101
-:10F660009D3911E687F2D1EADE951E4B4FF467878C
-:10F6700069939545481F7709FD3A1E20629BDAFF82
-:10F68000FBCFC407BE8AF8CD457844C5BDE6E67019
-:10F69000FB6C218E9347F6A5126D5FB2F0426AB7FC
-:10F6A0006473FA7A6AC302A2B70480979484F3E77A
-:10F6B000F05B7607A7AFCFBB0E7DFE03D04920DA03
-:10F6C0009E8EA293BB62D1099BE3F392BFDE9F3D66
-:10F6D000A7F1F9360BFB51B7939D69BADD1C147085
-:10F6E00060A1A26174653301AEC33C8CE234351E67
-:10F6F0006B3008208B4B9A6A21B95361619E0C1CB8
-:10F700005D611C8F73E468F9638E0FFA8FC79BE409
-:10F71000BB31EE547C6684A15D7A2ED3E4274E3053
-:10F72000F99139263F739A493FCD30F4AF4CBBC6AF
-:10F73000E4C72E34F9B946796363364DE0CB4A719C
-:10F740000BCD22DBF2F13E23FC443D27BFB317CEA5
-:10F750008F2AD5C4AFC2AF31F3EB37726482B3C521
-:10F76000C3FD1A9D1FF4F775F839BC1AE17563BE25
-:10F77000AE9F7CA4775CA12F338CABBA7C3C4FA3AB
-:10F78000F7DFDAE07AAB621C63DF6F606F5500F27F
-:10F79000820D1EBA3EDEE0A5EBA30D325D1F69C8E7
-:10F7A000A27E9B1B7CD47EB8C14FD74D0D0ADD7F56
-:10F7B000B0A192DA1D0D016A6F68A8A66B7B834A1F
-:10F7C000F7C7DA540DE32063DB984F83A58CEB80F9
-:10F7D000EF45C16D4C1BCC230AEE199AC7D01EBD54
-:10F7E000C66BE89F5E2F1B9E8F5C9D65789EAAFA74
-:10F7F0000CEDCBABFD86FEC3038AA19D5C5969E885
-:10F800009FA4040CED445FB5A1BF3B4B353CDF53D7
-:10F810005A343432001F773484C20887F686305D4C
-:10F820003734BC44D796869E30C2E90CCA5FC0A369
-:10F83000C7D649F2C333D1C3304FE17201BE008F46
-:10F8400049368F25296AFC2405C6CB8A9E1F8C6702
-:10F85000F0CF82442FEEACB0E1BED3DB63786FA66D
-:10F8600094508EF98923C512C5BD8E142727A2FD99
-:10F87000B2DEEE999B0BF3387C4CF26DC5F5E20BD2
-:10F8800031E4E529616FBA27BB482ECCDF64D92A61
-:10F89000115DF3F76FEA1E13337E74F89BAC1AD731
-:10F8A000E5DEB35346BA985F5C9B1C17E5AFCD0FFE
-:10F8B000FD47452A8D979D1F07F4327F73ADA36ED8
-:10F8C00062DFBAF47E376D32DA977D741F74E13AE5
-:10F8D000C66BDF74A17C6B4FDB4AEDF6AC81F32481
-:10F8E000BF13EBF950D8CFA7851D7652D861EF0B27
-:10F8F0003B2C22ECB07784FD7C5CD8CF6F0A3BAC0C
-:10F9000047D861AF0B3BAC5BD861AF093BAC3DEB7B
-:10F91000B959240F9FB53029869FAA5FBFFA43A328
-:10F920001DF6E5A0D10E5BB5D96887DDD861B4C3FB
-:10F93000EADA8C79B95AED2AC3F31BD618E36CD7EF
-:10F94000D71BE5E1B2D5330CEDA5AA31CEB6A4DACA
-:10F950006887E9F8B93660948B0B2B8D76587FEB6E
-:10F960007D21349BF23F88C413517AAF378F8B7A55
-:10F9700005E825F702E8158A83079A317FB203BBB1
-:10F9800080FE2DB1868F4E41F9F9BAC430EEB4E74E
-:10F990007CFE9CF9F2C5DFC9D78C74B3FCB831BECC
-:10F9A00071DD1D46B856DD6CF44B1C9546B82A69CE
-:10F9B00046BF64A159CF048C700529CD902ECDFA95
-:10F9C000C6EABE5946F9FD79F58E83815EE16D8305
-:10F9D000DE71E09D4CC373D23B6DB93C5E970FF373
-:10F9E0004063A131AEE010E693F6BC61A3FA109833
-:10F9F000E06B6341FF94E2DF00BF17EDAA560FF4FE
-:10FA0000FACB42A7A7094C56269DD9FB35E8EF1043
-:10FA1000F910F6A9ED248EAFC22FE22B9F413B4A8D
-:10FA2000CFE585F9F3A8F91A9E7F0F7136E07C9433
-:10FA3000D7C6E6FF3DE7939882F6109BC2A6509D7D
-:10FA40004164D8A0E2ABE6FBB9216E07E5A6713BA5
-:10FA5000C89FBE40127927E6C1B695B9289E398A5B
-:10FA6000059FC63867FC21F73C6836E390A9E85744
-:10FA700019F97FD19C81F3F25FF21AF97FB63CC687
-:10FA8000E40F19F97FAECFC8FF4E66B25F224C4635
-:10FA90007B927060353C2738BD26E8A8F1BD96659D
-:10FAA00094874DE771379D7EA6097C31D6B9B7168C
-:10FAB000F3CDE057A2BFE1645AF214AC2B0AD72B66
-:10FAC0007ADE8DF026ADF5915D7A86E3C70FBF88AB
-:10FAD0003F3F8BC217E2EFB8117F4ED3F3D3829E24
-:10FAE0002E9E17A7A37FDCBC4C749530EC12F9B79F
-:10FAF000D874551656A44498DF7E8F85F2A9FBC3AF
-:10FB0000F5E132687FE2E5F542AD690B6C345FA642
-:10FB10000C9909789825D6EB1779ADAE064676C7CD
-:10FB2000F30D2EBA32562FA13C6AF1DE968CFAB153
-:10FB30006B943A12EBD2BA8627ADC3FCFC367B52EB
-:10FB40005AAC7A96DDF602D2A75DBB536D32BC5F2C
-:10FB500066F3D8F0BDB2B41512FA7B5FEA616417A0
-:10FB600094A5F1BA8CE71B4247F8F754AABF8175F8
-:10FB7000CC40FBB4C2533B233105E3B3608BC9686F
-:10FB8000E72691FFBA6FB893F0E6F4ACAAC0FCF197
-:10FB9000ABA912B3F8013F3EE60BA11E484BF0059E
-:10FBA0007138AFFD7D84F36AF8FD2CB34F2F009FB1
-:10FBB000BF1F8D8F0216D5A6BC82B13D224FD43F08
-:10FBC00009FCC84CA53A8B961E9E1F6291D8799667
-:10FBD0007785DDA0C7F78F0BBBE14D11773B22EC9A
-:10FBE000861661378484DD7054D80DFB84DD704047
-:10FBF000D80D2F09BBE11561371C127643AFBFC08A
-:10FC0000EAC99EAE65AE08C6D95F05FF1CE58877D8
-:10FC1000A5255809EB98A17604CAA1ED5C6727F9E0
-:10FC2000393A4D6BC4F8B8B35A9B89EBF02E3FBB01
-:10FC30001AFBA7A6396405FA3796B6A746789E61DF
-:10FC4000C85CE08F95825E96AAB30E207FE870674D
-:10FC5000D2A379946FEAE0F076C12FC23B55857646
-:10FC6000941CA935C17529B6A3E48603E910E058B0
-:10FC70009927F82187E570786B7108EFB85A016F02
-:10FC80006F4A4CFED82CE0ADC36377E957AC1A74C9
-:10FC90003D9AC6EB258E167FC5FA2AACAF5B91283C
-:10FCA0006FDA9DC6C75B20E8DF3C9E9E47DD583E6D
-:10FCB000709CEEB0E8D7DB6E63B27368D438E5FFB2
-:10FCC0006697E1FD25A17BD2911F360ED1F3C33E8D
-:10FCD000B2AB674AC5BFCE80798645DDA32E271714
-:10FCE00033011BD3F78E8A75F6379FA3E5D7D86506
-:10FCF000187751E81E86DF73DAEABDD1F5A4DD621C
-:10FD00007EAD55B733E4C7F028C03BFAEF01A78CAE
-:10FD1000F6F6E834DFBD88776F9A6ABF13EECF033B
-:10FD200039287B705A1DBB53B01FBCF30843FA98A7
-:10FD3000D089FC7634DD45F2A6BFF95CA43F828C05
-:10FD4000EC90FEF407D031D941CE391F1C477F76A5
-:10FD500021ABF785E0BD70AE6F38F22FABB6935E86
-:10FD6000CE82DFE87C9A7E5D68D2DB6EBF7D40F993
-:10FD70003BFA42431BF2CD51C137AD3696887539F7
-:10FD8000E139B7BB103EF3D333F7207E58992B32BD
-:10FD90000EE0D05A7CE7F508AFD639AB3C16A4ABE1
-:10FDA0009231F43C5CE63A8D9538BF29BB3B5D8EC1
-:10FDB0008277EB7DAC544578A7DFE5BD09D69599F0
-:10FDC000F6A7067532F4B3737FA7A7FCF76919513C
-:10FDD000FD27E595FD200FF9B97238F1C378879AB0
-:10FDE00019AB1E58A7F3C6D278E2F3F76B799D02E0
-:10FDF000DCBF770DCC47C5BA155F1FFFDE28E829A9
-:10FE00006EDC39E273F53EA78C7E069396B7AC8123
-:10FE10007635DA4968376DE27CABF3717ABD515EB5
-:10FE2000AA26BEAD36F1B5CEC7BB75B9D9C7C7894D
-:10FE300088D7B85ACE4FFDF1F1D24FC1BEA142A032
-:10FE4000A0C1AF7B63E59878AEBFA2ECDA2924931A
-:10FE500064473E568132B26BE3C57320C9DD389FDB
-:10FE6000F03D3973115F5A23D8FF38B735F63E7A23
-:10FE7000CBC475B2217E587FFC5A291BF329ACDE16
-:10FE8000DE6717671ABE4775028BA3DB48AF9AF28D
-:10FE90001BB41F308C891FFDF37B47F637C3F7DA9D
-:10FEA0004724B34684E71D9CFE5CF010C703353D34
-:10FEB000C48FCFBF352E1B53F72C9A5E61FC88C6CA
-:10FEC0009FBFB36678369999A25D73CF98A9D8AED3
-:10FED0000AD84F46CB55566123FC5FBBD6B215E31B
-:10FEE0007EE3A58FCEEE85FEF157397CCD30FEB591
-:10FEF0000FACB0235C1669EAFE3AB8BF08E822E806
-:10FF0000A37518F8E4A8CD63C7718E56585807B486
-:10FF1000E31719BF53B3D6C847663BE458A23ACAA1
-:10FF20000AEF7F6071B2AD70DDBD65D5E338DEA943
-:10FF3000079C544FC870AC7CD4034CC42595C7EFC4
-:10FF400081E72B363B19C603960A3B3F313F83C6F8
-:10FF5000B5BA97D3FBB5ED89E40F9FDE72F964C49F
-:10FF60007FDBB0FA5B03C037A792D41AC4EB8AD602
-:10FF7000ABAC1A3C6F8BEF9889FD3FB032CFD66C9B
-:10FF800068CB0FDA713E3D6017609C559F676D5BD3
-:10FF9000147EE1BFEA7C1E779F67656A670C7BA6CB
-:10FFA00023DFA2C7573567D4FC1FCA97E9FEBCCC34
-:10FFB000612D0FE17700FB1E9F800BAE7B268F87A4
-:10FFC000B6A5F96A8643FBA485799A52F0AABC8348
-:10FFD000FCA9DDEF644F13FA19F5778C1CF1647BF3
-:10FFE00094DF3F497CF744127FFEBE373E88EB7CAE
-:10FFF0005FE66DCD9B10247AB6A9598B13F97A2C44
-:020000022000DC
-:1000000097E1AE073EBF6389B22393F0C1E4E76096
-:100010005E2B367D97F0BB0DE083FCD9E3915B76D8
-:10002000C33C4E83F2D6F0B9F7919908CFDBA70213
-:10003000A1A65E0CA77BF287F13CF4E6E644D2F77A
-:100040001EA63A2EEB83476DC7F6BB2D9349CF6BA7
-:100050005C7E70FEB3B028F90EF89D57F81DFB0AC0
-:100060005C6F1CEB40BC58F7AD73E13C97D6DA29C6
-:100070002E94C00295284F6B3759A80D3F1B505F37
-:10008000AC10FCD5260F3B5087F0403B9CFCBC4796
-:10009000F7635D40AD905FD52B8D747AA3D766A0D2
-:1000A000E3AA3546BA86751ADA9BF379FEA5C77FAF
-:1000B0002A05F5731B2C1BE1F2418B25B895E46BE7
-:1000C0006054745D9D9C6FD5EB56647B14FC5700A7
-:1000D000FDAD40BDE1621DE5A9B8EE71B390DE1D36
-:1000E000C7E2699E66F8FEB3C3E144BA5C331CE61E
-:1000F0007302E818EB7EDEDFD24CF60BFE4806BE3C
-:10010000F6B4207DDF04B37CC443F4E9C0FC914E17
-:100110002F3A7C6A37671CC07EDEFF932883D3C4E6
-:100120006ABD45AB30AFD34B4726F8E09A6DFA77FE
-:10013000C6F4D1193D8F4167E5D097E345237EA9E9
-:10014000ADE8CDE78D1AA86E99F05D049FEB9ABCDF
-:100150004C2B16EF03DD6F2C7D85E8E0130F0B4A67
-:10016000DC9F7D1DE57EA2989BC69410CAD721A274
-:100170005E14F512FAC9C962BD496B2C6F56E430A2
-:10018000366C8DF46605DC4CAA0887504F38BD42AA
-:10019000EFEE2AF8C9F8CBFAF4D890F839BE10ADD2
-:1001A000C6934AFB12EC9E54B47F1EB058AA315E2F
-:1001B0003F8419EDAA64133C58AEED64B43D1E2F84
-:1001C000E4FDAA99632CE4E7541AFD529BC92EFA68
-:1001D00011D2F5F0BEF5CBF827C0B105FC3694532B
-:1001E000C3421D1D489F3560B70669FD3ECAE7380A
-:1001F000407F3C62E98B5BFDA3E21617C5BF44DC80
-:10020000A2BFF8971E0758C86FB18D0ED58BF9BEE7
-:1002100085DE9BE6A01DDA58FA152FF94BDED36474
-:10022000973A845D1A376EA587E7CD38FFE87100ED
-:10023000335D99E34966FE33DBA5BFCD17F6D304E2
-:1002400036E1F3C405F4F87D6B16F77B5AB35634E8
-:1002500061DDDA79E1F778342BE171F1220BE151BC
-:10026000B7D716FBCF2E42FE7B55F81797F27BDAF5
-:100270004D7E48BCFF494589A13FED055C3EBA8BE8
-:10028000F9F3C52E667345E50D1C055CFF2E063D92
-:10029000E88225CE633CBF319F19F35249621CFDB1
-:1002A0000A3FE1A9F9863AC1A4027E9FF2A04E91CD
-:1002B0000775893AC1B2EC737B3FC3FB0AAFFF7588
-:1002C0002AB58FDD8976DFA2449F95E8577DFA3BFA
-:1002D000E81F2F7293BC4DC992A9DEB53ACDE52334
-:1002E000DAD794D7D12F5BC488B701D40AC9DB25EC
-:1002F0005817E119C0DF710D1C2F4BD0FD9D624EC8
-:1003000057BD71A50097DF56F8457ABAB6DA482F7F
-:100310004BD481E927BB40F8D162DFD6F8C885DD30
-:100320009F115D70FEDD388AE7A1CFCF813E98B77F
-:10033000EDC71ED7FDDB043BF8450968BFEE257A03
-:100340000F67317B34BE03C592A1AE215CC8E23D8C
-:1003500043713641C257D8CED21F80FE87CB3E6054
-:1003600077C0A712BE33CC82F57BFD7DD74CD7F783
-:100370008DBB89E2FCDF9E0D2082F9DE878965AAAC
-:1003800023F8E9329CC7B7B14D75753F5A8675752C
-:10039000DF8ED3DBCF7F4F89AA2BF87AC1AEEFA1D6
-:1003A0005C575DA05F613CB7CCA88E8AB14E92C706
-:1003B00012C6FD501E4F8C8227F90946F89AED7639
-:1003C00009F13719E9D1C8E7E6EFAE32E1A5BF750B
-:1003D0009BDF839FEA09467AFF5AC10075B1E6F7B1
-:1003E00013B04E22F1F3D71780E0A43CB4C4AC3E66
-:1003F000F48F5939A3EF593C9C8E50A2A0DEB3D79D
-:100400000FF111DCA01D877A20E8D6E3A734E93884
-:10041000A40309F38621D2DF309588650CF6D7EB6B
-:100420000C54F6997BF0720EE42F8D2357F23CF2B8
-:100430001B0A8BE0F7C63FB239908FFEF931D0AB83
-:1004400032EAEDAF682E689F5BCB280FE0F6A8D4A8
-:10045000864F459A61BE5E95B76B0046A8879D5E44
-:10046000639DEBEED247CA1CF0BCA582C7550F377F
-:1004700084DE588779DAE222928FEBB063D47CC3B2
-:100480007BE21C187751B5AFBBD04E7E77ADE4C090
-:100490006BB8A956C345BF91AA755A648C33A80C92
-:1004A000FD7AC7DAE69948BF6FD835DF30B8BE8726
-:1004B000715818BFAD49BB05FD1C459E539901728B
-:1004C000616B9B8DF613BD57FEFB34398AEF7E5B63
-:1004D000C0FD845777C77D1BE1D06A7145E2F06AA1
-:1004E00057B7DE9782DF73F81A618A6F343E948EB5
-:1004F000DF69BDB1D5B7079F373A7187296BDDE258
-:10050000AAC6715BD36FF2DE1435AE6BA4A31EEFE7
-:100510008747B450FE59ADF439E292705D1F257AD9
-:10052000E1FDB6B539C9488B2DA98E5175D8EFA616
-:100530003FFFBA00F12E5BF391F51CDE0E3BAE7B64
-:10054000B457D5300F7E214FDD87F4BA74CD7B339D
-:10055000A93EAE22E95EBC8EBEF0B53684FF1B22FA
-:10056000FE12495D4179D99695752E9CEFFCD4CC4D
-:10057000A6E8F84B4BF18DAEF1F05EA6D75ABB6AF8
-:10058000C8C5F4D182F19629382F58CF24ECF7A7AB
-:100590000615FA45D21DD5B1F663BD2BE0E76A5EBC
-:1005A00095897190962D2E4CC3B0168BBA19E39C89
-:1005B0005A4642CC7AF5097EFE5E8DEA99E99009A9
-:1005C0003FC46FBFDDFEFAF7B4B1684772FCB96C87
-:1005D000CC658FD27793F2CA4E1644F9CD177D378A
-:1005E000B585E47F8B85F3EF04FF1FBF87754FCF81
-:1005F000E605CE20FC5ADBD4CD082FA6B9D890D280
-:10060000FEF924721F1BC540FEB6343AAB63D59B7E
-:1006100045564AF3904F8083DE1B322A4ADE37D597
-:1006200065623C24D2780571776FFF2DAE77100F8D
-:10063000912D5949A8FF22E92B3233916E055D9A1D
-:10064000C7FFF7026E3FFE242760F5A35E9EC8F346
-:100650009BB30B02366AB30E2FDAB55F00BA1DE901
-:100660001FFE0FA55BD273EF6EFF1DD115F30C2E8D
-:10067000EF1810F2B6B1F43F29BEBBBE90E74DF4BF
-:1006800078A06EE7C68DFB7E08FDF140A19ED72ABB
-:10069000BEF7768C1FE979D3393C1EE881DF58F12B
-:1006A000C080291E18DF4F5C7F865FE83D61CFA6C2
-:1006B000C91D817294BB87241FFA0F98AEC079566A
-:1006C000052CC110E51FE25D34EF1211D714FED6E0
-:1006D0005231EF371B5C0CF3461B1DCA7E9C7FBB5F
-:1006E000C8FB5EB7FA817BD1EFC6B835CE7F1EE37B
-:1006F000761C2B8EF351BC05892095F5FA670BF01B
-:100700001EFAADD29CBC68BD083320BB653E33DA0F
-:10071000730B98C9CF5AC9ED30DDCF5A66B213CCEE
-:1007200076FE22D3F3BE7C0078174037E7FC391BF6
-:10073000B1B4ABC6BFEFDE480CB9734CE4E98E36FA
-:10074000286FA21EBA77D1CF5C48A7EB6D9D2ED43F
-:1007500027EBE7DC9E88F4B77EB9447C79A4A192AC
-:10076000FA1D6E08D0F55BFEA4DE785648CF33C084
-:100770003C5EC953EE423AD7EDB14573CADE5C1711
-:1007800085E70515B30DED4071D59BEBA2E3903ADB
-:10079000DD49AC3E561CED593FB7DB6D4097545FC9
-:1007A000283DEB1BA8EE06E8E85C349CD6FB8DE701
-:1007B00010BCEA9F3174203B465FAF0E271D0EFA36
-:1007C000F3FEE679A79FCBADBF749EC1CF394FF33F
-:1007D000FCF479F7D73F2071BD70A7BF6C39EE17D5
-:1007E00079254FED4479BAA832693FC61A8EDA38B6
-:1007F0001F1D5512695FFBFE89566ABBB378BED5D3
-:100800008C5777652DC9B54BE137BED8C2E3CCE034
-:100810003F29F0E72CB1BFBE7D2223FE6C2CFDF1F9
-:100820004B987FFE4D999D0939336F6E94BFB4D1BB
-:10083000D119BA338A4F81DFEE45BE75EB798780D7
-:10084000317F08FE8E217F6896336E53DEE1B00E55
-:10085000F77C80FB983EB8F7EFD7C4A60F407C1E0C
-:10086000E2DD0CA75B4DF031E72702BBAA8CCF0776
-:10087000E9D76C6DCBDD8F79350DECCB7100A7D747
-:10088000F011BC17AFFC94D220AE42CE37E3236701
-:1008900036A09EEC069580FA66E382DB3763FB3C6C
-:1008A000D80188DFFEF980FB6FCFE6291FFB63D4F8
-:1008B0000DE8D76EB417A6605E30B6BDD0BD72C667
-:1008C000DC98F6C282BACC3C9C5795D15EE8DE52E9
-:1008D000F9580EDE477B017EBA0BEB0CF602ABCC6F
-:1008E000B9047CB8FC8D1B971BB33E6F7E9E3AB457
-:1008F000306A3DEEAC7A165DC7F8C77CC55308EF89
-:1009000057F59E43C2BF07F6D83E7B8CBA45FD7BA8
-:1009100053FC7C3FBF7E8EC860CF13D1EBA7D7DBE3
-:10092000956AB4FBF4B897DE6F4A218F73B4652AD9
-:10093000ABF1394B987A89711BF5384756F665A2A9
-:100940005E5866BDFED17F5A647A1EC3FF639897D6
-:100950008C4F3BBBCF035D4EFAD55C8443C9D9A015
-:1009600086F910E71C0BD94FCE344676CE60FDAD2C
-:10097000C1F66B6BE2F2A775058F979765DBA81D33
-:10098000AF4A5B51FE4CBF30D4827223A04A4FE283
-:100990007CE3958F3E7C0AF535D801188709B07A3B
-:1009A000DA5F9D600F507CA27D0E8C9C8D71982625
-:1009B0007B26C5D3337E9AE8C5AF05DB305EEEF407
-:1009C000F17D50D57EED5E3C2F637EC9380B83E709
-:1009D000F3025CEF2FC6F80D8EBBE8EC6E8CFF5C6B
-:1009E000EBE7F20BFD38F4B396D4DD3DE961F92F66
-:1009F00089DB04DB9273299E2453FCC0141F7216FA
-:100A0000CFA2F8905E271128E6E7F7B0B4043A7F4A
-:100A1000C21CDF31C773CCF11E737CA7BE90EB7193
-:100A2000DDBEFA5AA1D1BEBA0BF71E0C47790B2ACC
-:100A30000AF8BADDCED23B2646C75FAC0CE32F776F
-:100A4000159AE28C83945B61902B2770217B5FB6B3
-:100A5000A3BFBB5CA9A5F89E99EE1F10F2ABB930FD
-:100A6000C150D7116E5823DE8FD310CFCBC73A8237
-:100A700071197DE30C963FB6E42BF717723F6323A1
-:100A80005E994FA57D04B30B3C06BA65F5C3D989C1
-:100A9000E8BCAEE9BBFA7CF4F13FEF3C3608780FD6
-:100AA000964F369616B91CF0FD4F00C7BC3E1A0C87
-:100AB000ECA8F8B41E3FD7DFABC1BC410EDA9316E9
-:100AC000CA1FE8F7A3E2D836A4DBF8345509C4906E
-:100AD00097E1C2DEB829E531F5EF308B4A72A14EBD
-:100AE000E46BF4F16CCCDB487C80B4ADCF4B8A1165
-:100AF00037673E97134866C50689613C2881291DE2
-:100B0000187F76B4D9A9CDB4EA0363A3EA871CC5DC
-:100B1000B30E609C4DE70B73DEC621A5CDC261EB21
-:100B20003A8CF92B737ECA6C57EBF1751B7C04E78A
-:100B3000F507C4075F6F501ADC7A9FA4F57C41D794
-:100B4000ABD3D59C9CAF7AB1FEA4254EDD5C0BF3F4
-:100B5000D21E7351FCC28D73439884E017E5E463A1
-:100B6000FEA750FE5E28E4E7D1B458783DCABED453
-:100B70003FA544EF5BB850C8EDE1A70A651E27B159
-:100B8000B110EE93621353882FF4FA93C3A9DCBE1D
-:100B90009C5F7263E87668FF2F51277955C9D37A35
-:100BA000BE7F48593EA3D20F6E0FF27AB4C357F6F8
-:100BB0009EA7B207FD4EBD5EF7AA4EA39F794D9644
-:100BC000DDD0BEC8CF34B5938ACC7564AA8BEAC891
-:100BD00052451D9998BF994F7ED8C0F31A3F16F51C
-:100BE000FECF8AFDB2FF5BD4ED758AFDB2CF89FDE1
-:100BF000B23ADCD7DB558A4F9F9A0D365D765F5C43
-:100C00007063E937BCC8C7938B2C7A7E660FEAA95C
-:100C1000BEFD15039F0BB6B0D29837BB3660CC9B98
-:100C20002DA936E6CDFE94A34C29C27CCBE4D54D4C
-:100C3000783E41D52689CE27D8F8F0271F3E85F685
-:100C400062313F7FC7FC9D2362FF85BE7F43BF5F4C
-:100C500056C4E9C3BD27D58E75F8559BAA66613C7D
-:100C60009D79A60ECA7E9B8D317858B7BBC963C7E4
-:100C70007320AA424B1D38CE8D9B619C84C18F731B
-:100C8000DFB8CB286EDD1BF7D7AEBC1EDF3FA2C797
-:100C9000FD59D6F565F0FC8888FB2FFBF984C7D099
-:100CA0003F7AAA50A94278FC5BA1B200AFCBC47CCA
-:100CB000A0BD28BA0D3F2F2519CF9D585634407C32
-:100CC0005D9A6189E93FAE2CE27216F4516D118E86
-:100CD000EBEA8D7BD5E178CCD541FBEBEE2EE2F251
-:100CE000A9F94DB61AC769FE395BFD5C0CBBFBD692
-:100CF000228B3EDE57693CAFAEDF02B7F0F18DE3E9
-:100D000049CEAA5108E753585F1663BCBB8B1CFA47
-:100D10007877D2FB69BDF3BB3B7A7E7DFB663C896D
-:100D2000C8B4EE1AD5DA03F4C31E96A82EDDDDE5AD
-:100D3000995B88ED5963A88EE548C5C0E76BFEBD99
-:100D4000F6D11CA9F8D9BFE43E9AE78A3206B58FDE
-:100D5000C6BD80A9B1F0FE7341977B8A73864606B3
-:100D6000C09363CDC130DA19BD6D9BCA30EFE7582F
-:100D7000F32ADD5F1F17A889B5CF392CE8B4A56227
-:100D800065005344ADE9B30CE736FC3E57DD57141C
-:100D9000E52F3BBCDC5FFA64ECB9BDA89A16545849
-:100DA0006C9614B2B77D16306D73D756495E993183
-:100DB0007FFD03332E87E78BD2C0BF8B5A77D1EAF2
-:100DC0009FEE057665C515479A53A0DFCE7C358C1E
-:100DD000E3977AE57DD85E14C8A67AF7F5498CECDE
-:100DE000BC53E31CE48F98E77D42CC1BE47293ED87
-:100DF00073C8E516939C6C4D1FDF84F31F5FCE22F2
-:100E0000286133BD67CB301F38294F3D817C96E97F
-:100E1000658A7332DD5758543EC73CAE6B1AD7B75C
-:100E2000E32369F7637CF9B0EEEF977E6E7FFF6C8A
-:100E3000D100FEFE29911F68FD8E33665EE4D4CAA0
-:100E400085B1F3030FD7AD40BE3FF51DA3BF7F6A49
-:100E50004B750DEEEF3B25F203A766D60D981FD01C
-:100E6000D70972C8310DE5506F7E40D8ED22CE3DD6
-:100E70003F4F89C3E7E0CFC74FCBA37DE86EBC32BD
-:100E8000CD733DED4366B1F7C7B2473D0AFA39FA73
-:100E90007EF6297E3505C7D1F7C98E47D1368CF647
-:100EA00075DF1A8B9E478BF9FDE579D3DEBCA695DD
-:100EB000F64F0F326E3FD87EB2BF93D7E3D8789DFE
-:100EC000615C6AB917F355E727BA48BFB7E1FFA2DB
-:100ED000F46A7A919A376D78F438A6F354E5C17DB7
-:100EE000375EF89BA8AF506F75335689F2E6DB4941
-:100EF000F514F79821E066BECE9A26F0CA3C290880
-:100F0000CFF4A2C04CC2E3F39D329DFB2AEEB3ACFA
-:100F1000C1F99FCF38026FD3BEFA7249E675798C5A
-:100F2000F8E28A2C0FE969DDFEAA9DC6E5A6934585
-:100F3000C63A609DCDCADE841CE8F7EEA3B66C7C91
-:100F4000ED0789CC8EF30E64819C8375947BD5D19B
-:100F500003C9473C89C88AFB1E58C862F5D2359937
-:100F60005F350BDEBF881F1F3D371CEDF11F3CC6F0
-:100F7000F355573CB6D2B5226AFC87A709B999C682
-:100F8000E75FA358827206CEE72CE5A5AA64AB4FB3
-:100F90006198473E7F6C09C609C17E1B47ED4FA88B
-:100FA0001D96AD3998E77ED7FBF131EC7FC5376FE1
-:100FB000BC8CE85FC0E386B539CF909D9FA7DE81EA
-:100FC000F80F177F92386622D9F19B91FE6FB0B06F
-:100FD000402C3B6683C0DBD54AFD754867572B4ED6
-:100FE00086FBD5C2654E82FB0F4A2C32DA95F3910F
-:100FF000E6319EF3A88DE2CD008F9BF1F9219F9BF6
-:10100000CE892E577E6AC3F69F2659D8E503E8E3BA
-:10101000CF0DD7E24F86233FBE8BF41763FEB56238
-:10102000FE3A3F01DCCB695E0AAF1FE98FAEFE5886
-:10103000A87C17E1D496A9AEA6F3103D0B06751E49
-:10104000E2FC1F06A976CFF9FDFA112C46FDD76107
-:10105000C127E6FB3F9CC6FD821BA7F17ACB2B1E66
-:101060003B776836F2F55ABB07F1FA5461E0C7D313
-:10107000A2FDAEBFB21C99292D27FC85E7C0DCF983
-:1010800041A089D89E37D646F8D3CAC5F91E773114
-:101090004F7312BD456DD75A0BF1993BA1A31A8D21
-:1010A000665B61FDB16BF1BD3289F6F347ED7319F3
-:1010B000B08E2C22F2592DB8EF0C6CF9F03A493F62
-:1010C0006F8B5940B6852B6CC2BEFFE031652CF0AA
-:1010D000BDA8CF3CFEA2F571AC6B3966E5EDF08B97
-:1010E000D6514D400791517C1EED0F587C8D325EDC
-:1010F0009FDC8C7906758DC55709ED9AD03D5E0C45
-:1011000071AD58E764E82ABC77EF15642F7EE2657D
-:1011100074AEEC9254CE37756116B466F4F9B7EF3D
-:10112000A4B3A09E3FC5FD737EA1671EC4FD6B30B6
-:10113000EF2F6DF8BA7637BC1700BF17E36AC37C90
-:101140003CBF191FB6F9820CFD5D5E1FD9D26861E4
-:101150000FE238D28666F4CF9D22FF11AFD492FF02
-:10116000380CE853C68879C466D8BFA63295E837EC
-:10117000B91238231BAF46FF38F712FBD8965C3FF5
-:101180003C09F9E5DC34A35FDC5F7C5DBFE2393705
-:10119000889F2E916FDD01763BAEF7E760B7E37570
-:1011A00017D8ED781FCFA5C62BEE63C3EB1EB0DBBF
-:1011B000F18AFBD8F08AFBD8F08AFBD8F03DDCC777
-:1011C0008657DCC746FB0E4BB4D050844F593CC306
-:1011D000FC508B9DD39996EEA03AF75009A37C7EE4
-:1011E00038DDB1B509E375168E272D893F0F27AA83
-:1011F0005FA176C64499D7C5B351B87F709D65A2EB
-:101200008CF6539B43A63AFC534D36DA9F7062AE80
-:10121000E56DCCBB308BD527817DF3CBCF6E25F828
-:10122000D72ACC8AF2A109CF0B4579FC2113E71705
-:1012300084253C57AE3991097ABC2EA880CC7E1FFC
-:10124000BF45F47A4045BF78BA536FEF55F179ED59
-:101250001A8BE8FFAB20D26FABDE5F3BF404FAAF32
-:10126000EB4CED6EABFEFE686A1FEBFDDEC81A05A7
-:10127000E93D537F9E7A03B62371FAFB7FBC01FBE5
-:10128000135CA8EEEDD413389F13E97A7FB986DAA0
-:10129000BD7573D7ABD8FFC470DE7FCB9E834F6222
-:1012A0009DC95F7BBC6655A338BEB688B1A7932E97
-:1012B000A6AF77A74BC678A86231C443F5F8BBD573
-:1012C000BDFC72DA7FD6E424B91849F7D5A0DEEE6A
-:1012D0002F2E1A15AFA7B8E88FA6EBF5CCA6F827E6
-:1012E00070168E5B8DF1401F7D558DDE9FC62CF5EF
-:1012F00021AC530F9C4994D18E74A445C5EF840C46
-:1013000018285ED85CCFE38361D54EE777E875FD9A
-:101310008E6251D72FE2857A5D83A3F86143DEC0E8
-:101320001C2F64D2CD948F0EAC34C603E7AB9F2F35
-:101330005EB89C85EC9723FD2B16AA8B58EE91DFA7
-:10134000B90CED6836819FCB28BF14ECADEB9769E3
-:101350001819CF9BAA16EDF65BDE7B1BFB079BE201
-:1013600064DC84BFECE6B2772E23D32D81617C6BE5
-:1013700059093F9731EF43DF4B32CA53AFD5C7CD41
-:10138000B4C03751FE06562651DEE4FA3B2CF4DD9C
-:101390005ACDCD104E60570A7AEF7A1CE94B725B3A
-:1013A0000CEDDC513ABD5DFB38D2FFF464BD1DFF8E
-:1013B00004F25B99437F3F8FDA4B558B789EF5841F
-:1013C00002AAE458B94EDF2FD7E0F36BC7F48E477B
-:1013D000F43DDDADB7AFB9019FB7F58E5747DFFBE1
-:1013E0000D9E6844ED194F203F9755097DA5BDF727
-:1013F000388EDFB25C1F7F7C10EB509759F5F759A0
-:1014000010C7AF63BD6D05F5E25B82FFBB8B3B6B25
-:10141000305E755DEFF34E5AEF72D17EBD587D029E
-:10142000F9E95F7E7D7FE7EF99DBD7B3F0CCCB7333
-:10143000FBF8C22CAF7E55CAE5887FF54F91CCD919
-:10144000F2FA27E95C378C07F07C56EAA200D2B7A3
-:101450004BF20167B08037302B565DFCCA123ECE8E
-:10146000E962635EACC594170B88FC547FE31C2AC9
-:10147000E5719DB6F2D87EECA4BCF28F8A319EC095
-:10148000CE4A389E470550823DDB98A3FE19EF03F4
-:10149000EB56903DC7980FEF835FACA19D390FC00D
-:1014A0008979D8C6D247284E7FA2D06E380744CF5C
-:1014B000736E7428241FDFC3BA0E908FCBCA959920
-:1014C00058CF78E308896DA57AB204CA37D8463A6E
-:1014D0009E24B92EF29EFA391CF32EB12FC2BC2FD6
-:1014E000E58F62BD9F14B7DB513E6B4C9B59914B0E
-:1014F000F23A8CF5C756F706CA033B4BED9447D03A
-:10150000F3CF75E2DC6F3DEF3BFDC250AEDFB3F4CD
-:10151000B8EEC0F9DFBA35BB03641F7448CC9A71CA
-:10152000713EB836A0A5DF85F66F4522ED17A85E9F
-:10153000F1328D7F6414A3F87BFCA27ADA1F640376
-:10154000FB50C17A17912FD6F7798FBEF035DA3775
-:10155000AAEAF5E7D29C2128279DADE067D1801C3F
-:101560002E7ABEB8CA24EF6B8BF939730CECF87184
-:1015700049F89D81F73DDF3F9D9FEF77B283D7F319
-:10158000179418F3C7EBED3CCED79669A4ABEF4F99
-:10159000E7FEEA83D3453CB1F4C7D508974F98D509
-:1015A000877931F6283F0F0E632CB4DFCA7C0E73A7
-:1015B000D662B2EB1E1D0D4B045BDBB6E62D8A2B0B
-:1015C0005A36F3F73E9CCCEAD16FB1D9781B2E1A6C
-:1015D000E6FFA7F8D53925583FB6E61DEADFACF19E
-:1015E000FAEFFEE237D525BABEE7F19B65DE033D93
-:1015F000B8AFECBF1CC731ED7B0DC8BCBE645DB19C
-:10160000ACDB17741E2110AE1DEDC5F4A2C00A9C00
-:10161000379BD829E33C7479132AFD6A0DCA1BA6AF
-:10162000C4CE4BEB7CDF62CA4B07BCFCFD43BFB8AA
-:10163000AB06FF3D88FEF2109BCA7AF306B795E031
-:10164000BC52F4BC81723BB6FBF4282CC86FD0A30B
-:1016500037ACFE6FA0477BED76ED580DCAD52FDA7B
-:10166000FC81AEFE9DE8AA92C7CFBE68F32F9AA672
-:10167000ECC3F9FFADBF73D5B4C06BF89DFB2C4A2A
-:1016800075024FEEF92CC63C5F4FC90079BE4BC5C1
-:101690001FFE27DE3070BCC15AFACF196FB0E39E2F
-:1016A000AA3CE2A3CB4A918F8A391FFDABCB3D58B0
-:1016B0006F6E29F14367307ECC5FDFDF4F2F52CB57
-:1016C0004B490FAAD63D403FF795B9B83D13E2F01C
-:1016D000ED8B67C0FCFD8678C613ABFF06F10C5896
-:1016E000EF02C26F85F8FE171F7F37137C156E4F10
-:1016F000FC0BD2671BADAF93AFEF1FF0FDCD442FB6
-:10170000CF727AE9830FB793A2E073C3EA7F0C7CB0
-:101710009E25F8ECE0F3FB02E0730FC1D3C7E77B33
-:1017200029FFFAAD629E0F81F75EA675E6723A78E0
-:101730005BD8D7E077CFB85CEEF3BBB7E42BBF2E16
-:10174000E579E4C3A586FA4F258CED01FCE2EED2E3
-:10175000D87EF19B38DF2F9A5FEC2EE170EBCBBB8C
-:1017600004F979B7ACFAEA2BE13BEF00BC31DED6E5
-:10177000BE4622FBE27C1AA3F300747BE34412AF63
-:10178000DFBB787F584508E7ED2CE4E78CE8E703FA
-:10179000D8A4E54343F2C5707D7588ECC07D482B25
-:1017A000144B0B9E133843FB88F69F391427FD3BDF
-:1017B0005BA3BD3EFB1DE847839FFB25ACBF5CEDF3
-:1017C000A1FD27FA3E337DFFC78A50EA01DC77DBB3
-:1017D0000EF4900ADF995F61DC0F62B6376CA6B633
-:1017E000F9DF314D9E6E3C8F0AE04FF6CFF9365E41
-:1017F0001FD76E637BB0FE43DD2005C164624F6B73
-:10180000163A877325C0C90AED191D19544FEE48C1
-:10181000E3E79DE9FFCE29D041079DE7744C62784C
-:101820009F897D65FAF9DE7173F9B97A11583F9E87
-:10183000DFA39F335125E8448767DCFDC90497F394
-:1018400000178671663FB747E7ADE1F9E096E537E7
-:1018500086918D6A8A3F5A17AB2E65B1D7784EBAFA
-:10186000399E613E67DCC60243F1FC8AF9C5651A00
-:10187000DAAB4E51AF19CF143AD722A23DC5CFB53E
-:10188000A8B01BCE11317F37DE44A74E53DCC14CCC
-:10189000A766BCCC32E1E5691B3FC7B1A55BF26925
-:1018A00070BB65D3CA36DCA7AF6DB2F2BA79A6D0E9
-:1018B000B94F2D60F1D27E74982CC6EB970878EA68
-:1018C00078C183BCEE49413921F6A55BEBEFC5FD3C
-:1018D000A54BC5BEF4EB5827ED33B89E45ECE80C9C
-:1018E000DC80217209E3DDB2833B071E86F3A8ABDF
-:1018F000E6E76458710D9827D864257E6DF1EEA156
-:101900007FEF2B34C29E743A8BFB13B1ECD9DEB857
-:101910000240E274541CFF7FE257FFB5F8555E09A0
-:101920003F8FAA252EE429CCE0E74DE03E87BC128C
-:10193000599C37218FEA003E397CDF071ACA617D46
-:10194000BF03FCACBDCC788EC2E6E903F87FC525A9
-:101950008C7F2723928E7595EF8873FBCCF8FD253D
-:101960003A0E5C0F3D399DF2EF60FFE6A2DCE3F634
-:10197000EFEC82C053D3A91E9DEF7BD6E34827FD31
-:10198000EA0FF17E09FEBB39B9B43F2788FB77E641
-:101990002758F65BE4BEEF33731DFB7FD3BCD5ED58
-:1019A000C51C1EE1385EDF1ACE60D5CFC5C0C74367
-:1019B000E55C1F86B363E34B7F0E76C6EB882FF49E
-:1019C000878670A238E330C6078E0F441F3A1E93F5
-:1019D000672AEF10DEF57AF002F524B69BD5C0DB5E
-:1019E000747EDB06496E44FD1A925FC5FDF5F3BEB9
-:1019F0002579108E7FEB3CDCBAE28C41E5E1962143
-:101A00009DE5F52FBFFED2EBFF0742E7FBCB008041
-:101A1000000000001F8B080000000000000BED7D9F
-:101A20000B7855D595F03EF79CFBC8931B08F42224
-:101A3000014F0268D4602FEF04089E9B9B272470FF
-:101A400041C0280F4F08626CD1466514289D9C90B8
-:101A5000104244C119ABAD75F4120CFE7FC7AFA69E
-:101A6000FDAD15E9E38268A9851A6DA8B1551A90F4
-:101A70005AFA8F9DC10A63EBE8386BADBDCFBDE765
-:101A8000DCDCCBCBD8A1DF4CF8F4649FFD5A7BEDB6
-:101A9000B5D65EAF7D72D4C9189B01FF1993EBB424
-:101AA00002C63AB07C19C31F8D4179E9504B390702
-:101AB0009AF6F2F65768FF1636C63156CF447FD1F4
-:101AC000FE37126F7F34302C6CA4337693A887B224
-:101AD0008E65B33F634A6E4081FE0D9259DEA9299F
-:101AE000D6F932776A30DF09A77DFC6562BC42ED2A
-:101AF000131A3F149DFF93B006E5FE38F897335E46
-:101B00002ED5FE42EDEB9859FF171DD77B5C32CBEB
-:101B1000E375EC7FC46596C7D6E1FC0FE4F2F1678C
-:101B2000978C0F1B97203C9FF7F817DAFEED592A88
-:101B300063C3011F0DDF0D7E017E5DD6B853D6A1B4
-:101B4000DF5167E86D960D64F6A0A476419F42D6FA
-:101B50002D3399C076C95360084D621D30D7AA1243
-:101B6000F8DF54C063BA83CF63F8C31AD0D9D2D98F
-:101B7000269DD68671DE6474F79B7D773C8EEB8E56
-:101B8000C26DDCB1C206B731BE4E9B15833BB81F98
-:101B9000DAC3784BEFB8CD87702ECD33D73783E6D5
-:101BA00069CB32FBF59F75DE57F79512BE9746E776
-:101BB000A9A2F64B53CDF1168471DE183E97D07E64
-:101BC000C4E01A6DC3A7BF6409E133E40D6F1E01C1
-:101BD000F809F998DF007CDED4D02CEB05163E32F4
-:101BE000822AF1912F5A0EDBF9A880F868B0E11A29
-:101BF0003D23B455837D62F9DD6A68C2E7B1EE88A2
-:101C0000F30BB8EE6D12ADDBA4A3655E0BBD7B607C
-:101C1000DDAA59BEB2AE217D30E6ED29A379DF03FE
-:101C20007CB3183F3163649D967EE1E3B5A4E7B9C8
-:101C300070BF566A921686FE9FE2CF75B1E7DBB39E
-:101C400024E217C0E7FF237C16023E33F03D233E1B
-:101C5000786672E8071AD4335577EC07B85C9A8730
-:101C600075000EAAA687F6507BB6C387F8070068F2
-:101C70009CB6D798827C06BCE577CC84B293D576A7
-:101C8000170C9CF7E11207B56F61ACB21BE09AB27A
-:101C900029B43A6469E72DE370658AE7918CFEE523
-:101CA000C361FE77A06A138CDFB20D98179EC71A26
-:101CB000A4B0044D8EE578E715427D4FAEC3BF0951
-:101CC000A6EF59EF1EBD16CA7DB9E97E84AE2F6B13
-:101CD000478617E639E697059DDE761CF9FA4846F1
-:101CE000949F0C3C5F7A245EFE9556D489FCF4A642
-:101CF000CACBDF2AFDF271A300E98D79D908C003B0
-:101D0000F6005E75A4CDF2B8010E57398813ECEBDE
-:101D100065BA0BEADD580F4B5CB079D7D7AFA7D1C6
-:101D20006B5F1E378DB15AFC5DC5FE8AD1EFA1797C
-:101D3000954F257A32E7B4D8B8AED696975A108F19
-:101D40003E9995206FF9787B1FEB6FFED481E343BA
-:101D5000399F2109EEFB14F65C1265FCF914969884
-:101D6000CE4295B908573EF377C07C0B74E789687B
-:101D70003D7F6C53A60938111E79636521FC9ADA00
-:101D8000606F37371FCA9E58794E6B7D0903BCCEF2
-:101D9000D1A0DB44C60EB5D647EA619E43856EAF3F
-:101DA000049876E528B6F67359772BE29DA9070FBC
-:101DB000C880971562BE16EF82B7719C95F95002E4
-:101DC000F88F7C359031351BF94DF63B441B8789E4
-:101DD0000F46ED9C8E6C92D37EDCEF9617CC7D9BEC
-:101DE000DE897C20A749B672C065D64FE8443E3CE8
-:101DF0001295ABE3566279F158936F323A91AFAED8
-:101E00004B33CBAE95C847EF284E4127C33B914E8D
-:101E1000DACDF18CED245FDE6066BD83EA4351F9D3
-:101E200057BE13CB4BBC021EE31F481EB668FC3CDA
-:101E3000B96A5FA4DFB888F6C09F570690DF425C9E
-:101E4000DEC5D7CFE80DB76422BD007EC6AB03F96F
-:101E50006D4340263E0A69EFCBC837A58D8033D845
-:101E6000BF60ADD43B15695C61A391EFDB9A60ED77
-:101E7000E3A1FC62914BCD40B91E2AD712C88D1F39
-:101E80000438FFCE08A467BF8BB89BCC2623DDB5F2
-:101E900035AD13FD530CDCDFFA71AE704A6EF27192
-:101EA0005E0D3A48CEF448DE45FC7C96199ECF8103
-:101EB00007C7A617B158BBA783FC5C6E9EAC550440
-:101EC00060DE79207E19EC61F3EC47432530CF8941
-:101ED00022A7DF8DEB30B4D791CF160A1ADAEED2F3
-:101EE000D87A941B456EEF2694DD72C14BEBA0AC03
-:101EF0008C027EC57225A76F1DFE7D9A87E32A316D
-:101F0000FA073816ACB3F383C22CF40DF53705325B
-:101F1000B2DFBD060A57B3AB71FDF739432B508EC4
-:101F2000B5E785EEB0CAB3A7825C8E85C57AF7CFD8
-:101F3000FE762DE2E703E6F0A3FCD89D1A2279F69F
-:101F4000BB4CC63A27E23E32D53B02F99AAF43CAB0
-:101F50005FC2B0FD6397C31246021CEB7ED3533AB7
-:101F600019DE7F83F73B792D6B64F85EE1657818A5
-:101F7000C6446C7794DADD1BC8A379D9E37E8F075A
-:101F8000691F9AE37EA7B36E273E1D693F1CAD27EC
-:101F900090D3E693AD71BE17C503F2129C84B86E60
-:101FA00089E98E4F71FD42FE039D6EC4FD01A94F6C
-:101FB000E7C88C93A76CF43629A0121CF17407FDB6
-:101FC0005AA8DF22B31F73EA167D7D43E09170F3B8
-:101FD000383A8FB652BB74388FB26DE7D17D810429
-:101FE000E7D19555DAFDFC3D2F43FF0793F4FFC77A
-:101FF00044FDA1FDC3F4DEA313BEAAA66B8F6079D6
-:10200000CA18539E4043109CD70D33CBA93737E4F1
-:1020100058E5CFD427505EDCA84BA23EFF09E4EF81
-:102020002325A6BCF9D90AAC8FCA23B6F809945F58
-:102030005179C4E6DE8CF551F9C3EA1F47F91595CD
-:102040003F2CF804CA8FC002598C77EC711CBF6D0D
-:102050009939FE15E100EA250EB33F0BE3F8C9F408
-:10206000C8DE59DD2BF09CBB295ADFFDB866B133C1
-:102070007E354B7F02CF45B66D387BC7E483BC818C
-:10208000FC6ECA01937E4CFDF0D517C3BA01ED1664
-:10209000566A11EBBE44F5CC7EAEF7C4F4CBDF73C9
-:1020A000FD7BF0F5C7D768FE024E6F9FC3F86F5BEC
-:1020B000C737F52978DF4FF427DE5F6AF61CC07753
-:1020C0009AE09BC2E1BB88FE1FD3BAFDFC9CFA2BB1
-:1020D000C09B5A62B1032E417C8EB9C4E19B5482ED
-:1020E000FB5DCDF7FB698D99727C2AC13D800ECED8
-:1020F0009BFE8B69DC52BE6ECBB89A75BE64F63A15
-:10210000B42BB3B78BF24F25C125C63D4BFF1A7BCD
-:10211000BB68FF5089853E0781CF6FB2EEEFE720A5
-:102120004756D3F8E3F8F8D7C7F0789BF5FDFFFAE8
-:10213000CDCE49E7DB899E1A393D9D87BEFD75C42A
-:10214000EF56A95BCF243F9161E2FD1B380EBCEF37
-:1021500077C1FB88D88F5D45A16FE17B2CFA2659AA
-:10216000EC1363E14E842F669FC04005D6F3FE86D4
-:102170009DD6F3FE7B2537ED34804EE4206FFFD4EF
-:10218000FE97EB70FDF165D04BFE2FED7F36E82515
-:1021900013482FF936CE7FAE7101FE6EC2C3F39C99
-:1021A0006E12D43F4BE33ECDEBDB5D5C8F7D63D99C
-:1021B00007A4C76977AA0ED4E3CC73FD27255C9FDB
-:1021C000057DA432917FE127C29F06E3FE84E6ED00
-:1021D000E6F8EF0DC919A86F46F51616213B28A69B
-:1021E00057AD223A8AE955B75279B6D8E7D74BBEF0
-:1021F0005427E07D85E341ACE7DCED7B080E1F6FE3
-:102200009FA0BE97C6CBE170B2F48327D06E257A2B
-:10221000E53FE31C505E89BFA900BF73717136E8CA
-:102220002DFB5B255586725DBBB9CF77135FC4F478
-:1022300036CE87370ABAFF53C906DAC71B4F9BFC55
-:10224000BF97DA4F89DAA91B08FE37857FE26BC199
-:102250000D267C27093E95C3F7398C7F9AF0C33849
-:102260007E6A99E144BD0CEDCA2E36707F3F167E22
-:102270001CE8F71FD4CFC3E1AAD525D2DF43AB8E2C
-:102280003991DE57F4B284FE2739E832FBCB41D2D4
-:10229000CB857DEBE77EA1F8F629C1283DA5507BD3
-:1022A0002F9FEFAB45A1B420BC9FA5BF161CC1F763
-:1022B000C983FA68A8540A77E4A27D935E560AE5BA
-:1022C000050ED64F761F639BD1EFEBFEA1C23AFC01
-:1022D000D45A552C7E1DE0D25FA11DB9586CFA026C
-:1022E00016F5AF38D05F63F1DF901DE80EDE9BFF7F
-:1022F000904A7E97975AD04FE693C9AE08DCBF2A22
-:10230000520FE5D442B7D78DF3C83964E7BAEE036C
-:10231000FB1365D4226E5F3AE01FEAD1A9EB18D90E
-:102320006FF30C29ACC23C6ECDEE7FD1379E6A2193
-:10233000FB6E15F36A59F02CB4D7BBE2ECD7E6C9B3
-:10234000BA1FF174BCBDDE81F80854713BEC78FB18
-:10235000D874E4BF783BFA78723BDA40BBB92766A1
-:10236000473BD70EA21D1D0CDAEDE8D145A132DCAA
-:102370004FA66824DFF6CF9EB190EC6543666E6889
-:10238000DFFF909289FE3E639BE24777C331A7B699
-:1023900082FC07604FCB63689B18FAB7E60BF8FB2B
-:1023A0008B4E9522FCDADD63FC48EFFDCD6EC273E7
-:1023B000FF2D59E134182FD3F8B03505EA5F0E8FA1
-:1023C00042275BD4BE8EB7C3C17C32906EFAD96807
-:1023D000D681FBA078D97A7C3666FA0D7FCCDE9E5A
-:1023E0009FEF3570BCFA701AC37D8FFC8C49EFE605
-:1023F000330A39201D2F60AA130BD733CD89F85F1C
-:10240000CC742ADF00FC268DC5F9F20DA203E03B57
-:10241000F4DF6D98ACDF46F8788CD3077B40D98920
-:10242000F18AFE6D0F66209FED4EB5FB1BCCE75A7F
-:10243000E16FF0A09D3F6150EDFCF5048F9013E734
-:1024400021579AF87E727E3D8DF6EF703A271B90E9
-:10245000CF7B841FF8812CEE3F7928C8E54AFC1316
-:10246000183E1BFB5FE83901E7E5F6A0DD8EDF8152
-:10247000E5F3382F1F2639F32C5F675B9099F2E75D
-:102480009B41AE07A899E44F01513C8DEF2FFE7C94
-:1024900024E94FE0F8DAD312ED578ACA480EB95949
-:1024A00028C289C910EB611B47D8FBED3E5BBF9B7F
-:1024B000037CFE1385FA3FE3FCC5A78042A19DBBC8
-:1024C0005A0A4BD06E7EBAF492A4C6DA1D413F542C
-:1024D00002397A54C85168167180BEB23D13F600B5
-:1024E000FDDB8A7F08CAEB379AB4A3A8C31D69AA8B
-:1024F000A4679FD248F2A3AF5D0E37C33CBF6862AA
-:102500003DA5E3078E5BBB2C70F484451ECD2F7B6D
-:10251000D2034291B5E4771E94D05FAFB955E4DFA2
-:102520009E0CEF0385C8AFAFC9AC0BE05DB2A8EA63
-:10253000E8098B7C881F17E66306B0EC1B41EEC7E9
-:102540007C31E08E5C07F0ACDA268571BC55DB8E01
-:1025500039D15FB9625D1DD3619F5C85C714DCCF43
-:10256000F28097D639BF50668605AE6F4ED37A8219
-:10257000DCBFF33AEDAF3FAA47FD12CB01A796E9C6
-:102580002D88F921CDB8C0D3C15DA48FF664319AEE
-:102590003FE463848FA096EBEAC7388BCF4B7ED3A2
-:1025A000434195E6AD6BDD49F0A4CE7A9FE001DDB5
-:1025B00039E2183A10DF261FBC26F0DE26F09E0C0A
-:1025C000CF7F0A727F9E599E5FA664209E5F5754FC
-:1025D0008A7324E3EF85A5F6FD71FB2A6DE516ED00
-:1025E0006E07D2D3F15639EC96E87918F7ED34EC52
-:1025F0001BFAE9CD717A3258ADF57C36F76756A9EA
-:102600004C7099FBB3C2E0FBB3C208105E569456FF
-:10261000B946F2B85A37D036AB2FAC6388179776E5
-:102620004C4139966CBF80DFDCA516FDF122FCE73A
-:10263000434A2D7AEDE7EDDF87F946D37C717AF6D0
-:102640005F2BBE60D2532FCAD582985C2D2BE5E755
-:1026500041FCD394AB167D92FC9A163856365C0436
-:102660001C269F209F3643D3E00EC9897C12427EF0
-:102670009D80FAD91F367F211BF98675A7C0308E41
-:1026800052CE37AE59592EA48BBAF6F7153CAF008F
-:102690009F15844F2187279632F31C9A4374D1C02B
-:1026A000E9E2BF3BAE03F02C23389771382FB5B861
-:1026B000D3ED35A146842FA4815C4A477FBC57ECFB
-:1026C0003F1BCDFDDE1716DF3CD67A37433D70C188
-:1026D0001F3354D4036F2AEAD272D584F14D55B218
-:1026E000C537EB4B488FD1182B19C9CE19DF8C8F0A
-:1026F0009F0E8C771A142F35F5EEF878677C5C9373
-:1027000025897F0E8C77BE588D7AE61CBFEC55D597
-:10271000583CD335EBDDB7D8B503E39D9FC07A04B1
-:102720003EB39965BD7DA3D5EE08C0D731D2E3EFA6
-:10273000E4CD993C2D864738073C6E98A7B50CE050
-:10274000477D39B793E2C6163CBA080F1788478A07
-:102750006F235E5AA5F026DC07A5D140795EC7BC81
-:10276000EAA3DED87E46C7CBBF47F341FD57EBD384
-:10277000990310B239FB2E5607E5D443294C063D88
-:10278000F6907A17EDF7A1F732548CF7BA7D967D63
-:1027900010B8544CF8E48176D25F611F3D7989F618
-:1027A00051ED2CC573F67CF76F5751E808CA150F29
-:1027B0009CD7CAA4D8FBBED11C9FEF5CC5C29DD2DA
-:1027C000C07D047C6B6477E6B39D846FD6C8D03F30
-:1027D000D02A31F551FF40BA70A46D341C682FAE79
-:1027E0004C273BAAA5B191F0FD1AE0DBF072FEC2C6
-:1027F00038D559F8CBA40B268D387FBA88DF778C73
-:10280000E3AFCBBEA4F735097FEEBAA07D9D3B5365
-:102810001B5236DCBACF5A56D9542BDF1A222FC599
-:10282000A07D341631D69535508FBA4CE4A5C078CA
-:1028300023B1FFA83226FC80DA282C5F7F396B4C4D
-:1028400094F7E2ACE076CC3250C1C9AF62A4B2AE2C
-:10285000296865ED787B04EE9771958A65A61E0C54
-:10286000235DD589F51FD9B2B30FDBCF074C621EAC
-:1028700004BE7558F0E32FCBA5718BD61C3BAC5230
-:10288000B5F7288EE702E18F76EA327C89E382BED3
-:102890008AF175A6E86C21C8FBE56BA5B771DC5A17
-:1028A000238DA15D1BCBAB782A2EAF8297E7E788FB
-:1028B0007AE3FB74FEC4E298FBE2CEB7373A6D715F
-:1028C0004CE3D84A7B1C93E7DB98E7D99197FE65E8
-:1028D000A5A158E398EFD3F8479799F315EEB2C73F
-:1028E000313FA1F14D3F35631F765AE3946049D1E2
-:1028F000F96AFA91FF5C36BD9EFB4DF585B83F72D3
-:10290000506A44FD080E184D227F8DB713ED69D033
-:10291000FFAFC7FABFF575821E727B9925FEF1B72E
-:1029200006FF31D3BF6F1C5AA9155CFAF002BEBF77
-:1029300045F8AEE4F8FE1B80F7BB6509E20097108E
-:102940007C2F117CD138C47F3B3C6F9459ECCFCFA6
-:102950007BBE1933B51338DFE7B08E536596FC8321
-:10296000F368FFEFD45EC44BE3EB6F2FF7723F9633
-:102970008813BF198DE365D6C7C5F528EE158B23DF
-:102980005E3E3630CE0AFFE5BBB0BD19479C5D9E6A
-:102990005B4F79D149E2981AD62BD6FE2AF5EF88FB
-:1029A0009BCF25EA17955F536FD8F07335B5EF8944
-:1029B0006B5F2BD6B7B27CD22EC3820FB038A97D05
-:1029C000542EB1E9F5F6B8E3D47A6BDC714DF9F425
-:1029D0005D66FCBF1CF1336E403EC4FF487C04CAF8
-:1029E00085BD29E2E5261D8E9EA195944FBDF4E09C
-:1029F00085FD5B526EA1FFBFC27CABCA2D79171754
-:102A0000DA3FCA8FE2DC37F32700BF77E03A6EAFD8
-:102A10005009FFF1F912A69D18EA676427CE646198
-:102A200019E31221BFCED00F1AE56B43AB277F5DB0
-:102A3000F47E44E52EFBFD88E65DA85FC4CEEFE79B
-:102A4000EAED790EE536B8B7BFFC9CB9EE96724B4D
-:102A50003EC3608FBFA6C28E976859E067E91DDF4D
-:102A60001C6DBF7F11DA45718CE8FD8B9B68DE58C9
-:102A70007EC7ADBBECF91D6BA91CDBAFA6B8FDFA98
-:102A80009A0DAE8FCB9B082E97C87B73AD9292DCCC
-:102A9000AFB891E48219D785B24D2E50F97380EB0F
-:102AA000804947824FA3700EC8CFABDB857EA6C19D
-:102AB0009EDF22175E42BA187CBCF3FB1D26DE9314
-:102AC000DDEFB85135CB5FA96F28F8ECF362FE5FFC
-:102AD00079C2FCA38B5D07BF2FE28ABF2FC2D6D776
-:102AE000DBE5CF79C3773AB1FC39BFFE9F24973F2E
-:102AF000FF89F2A725DDE1423CEB3EA68513D8C74E
-:102B0000B757F0B854943FC57D94EBB727B6A7BF2D
-:102B10005CC1FDD7A6BF3BE03AB5CA1A071D26EA3D
-:102B2000BD15D1BC016F058EBB8EC33706E521C62E
-:102B30007B98C234E0A945D78FCE41F85A7ECDC7E5
-:102B4000633EB0933362E3CD14E399F3EC5B9051B1
-:102B50006BCD6BC811F38CA9904CFFF4980AC4E7B5
-:102B600046BE0E79C81ABAE715B5AB8D87487EB553
-:102B7000394D3BFBB15D24CFA272E89B44178BDD3E
-:102B800026FD877759FDC6653FDDC5CF5528621CF8
-:102B90002FD6EF1BF564E79DA3DF6413CFAD62BFB3
-:102BA0008CE87E4D41B8CFD5DF624747A4EC981D35
-:102BB000FDCC646D16E219ECE9E2F31907F014A4F8
-:102BC0007D596BB7472CF51515B6BCA4536B30AEC9
-:102BD000992C2F6961C5D9F39216C6E86161854DBC
-:102BE000AF0F664C453FC94847C27B14BAD8D75887
-:102BF0007ED77768BFDA4CBE13E507B278FDF29F47
-:102C00003E532FE0BFB9C212BF30E32DACE06004E9
-:102C1000FD3C96FC22CD61F5FB048F3971BC15ADEE
-:102C2000D2F9F14BBB187F5B741F6FAFE0FE681DDC
-:102C3000FD8E378A498EDCDA4CE3D6AEE2F7C2E28B
-:102C4000F9E65EE1A7BA3746C7F7D2385A34DF66ED
-:102C50003DE20D5306DC9362E39BF77B02CED08FFF
-:102C600030AED366482ACA577D5D1DC51559256308
-:102C7000E3619F0223F3B6A1E830E7BBBC92EF17F4
-:102C8000FC5A8AED7C20218D9198275E4771E76977
-:102C90001ACF5B995EDD2C0F5729AFA503E72F5A9A
-:102CA000B4B305977DC3B2EFCA89F2597A309F0554
-:102CB0006132D8EBE346007F0BF8F05EC85A98E724
-:102CC000CD683E4B75D93DD67C96D067CB6731FD3C
-:102CD0007F4B4B00AF16FACBAAE478CDAAE4788DEF
-:102CE000C58119C56FAF60B573AEC2BC14BCB70562
-:102CF000AF7B0C7ECFED4C0E0B63FCBF79762AF9CF
-:102D0000F1FAB318C5556143326BA6611E09FF493C
-:102D1000195FCA30CFC50DEBC275605C3672250CE9
-:102D20002F2F1B124940CFBFC8D4993F1DFDFEC6AF
-:102D300066067413D41FA4F8DCE5ABDE6FC07957C8
-:102D4000E86E1549E0C6066F19E571ADF13BEF81FC
-:102D5000F7F37D32D3D09F5DED3CCEE3341EC2D37A
-:102D6000FC525E36F1E266CA712B5E94B8F2BAB7D5
-:102D70009AB71CB0B477455232302EF85285C80746
-:102D800012F78A989C4E7470C6E708631CAA4761C4
-:102D9000FB158C63E832C515BB5AEF3C8C7CBBC27B
-:102DA000A7F81DB0CEE03A89F2BF6EF4723C7DD830
-:102DB000646C39003A6CCAC83C8AC39CF17AC81B5F
-:102DC000DFB6AC8BFCF6402F3D0AB43FB69EE7174A
-:102DD00099F94F0B04BD98784CA9FB80F07206E37B
-:102DE000E18897C22CCA839A07F850BD14E76F4553
-:102DF0003CA5B2C6C830186789CFC122163F34AC93
-:102E0000DF9647066353DE99426F6CF5849FD4F5D5
-:102E1000419E8F26576BE89F3F53C8F715CA7EA483
-:102E20007756CAE9D4C47F6A1C9DBAE3F2C3E2E9CB
-:102E3000341EFFA711EF96FB5C5D0AF34790DE7A24
-:102E400065D22FA279570F3928EF8AB130DD63EAB6
-:102E50006243FD1D28372312C5096E107833F1CE69
-:102E600058E3E695E8E76ECCF4A3FF9F391A376381
-:102E70007ED48DE134CABFBB8975531ED472B49021
-:102E800061DE9B99D785E595CC4F4F8915D0FD9292
-:102E900025BA447CA1B348CD5580BFC865CE2C6B04
-:102EA0005E55D2BC2658F9BB9678C4D04A212F3D36
-:102EB000BA8FE779EAE2DE8F46F9415965A51E3DF2
-:102EC000C1B931BB481F5969C9BB50BC8D8CE2D315
-:102ED00045A151955363FD9F9AACE554C2F85F2C10
-:102EE000D446E37337EA79701E040F8E7F12CF83C6
-:102EF000E6C99A8AEDE3E5D5B1E4F9771AF2751FD0
-:102F0000CA2BCA232C203E1CACFCBBC99503F2EF94
-:102F1000A6565AF2EF8E3AF9BD32CA459EC906DE70
-:102F20004F5B7703D59BF7D3E2EFA5B1C7781916AE
-:102F30006474801C6F311A69DD26DEE3F1C3C4BD01
-:102F4000B4A5BE97FBA46B07216FCD0BCADDC8B338
-:102F5000D187C1EF2FD7DCD987F13A83299447D89D
-:102F600096CBEF2FCFC385E23AC6717D9055F1F332
-:102F70006A4B56A3CF0FF55B9C3C1F86E5EBECFA42
-:102F8000099671AB64332EB402F1097A1FE94BA69E
-:102F9000BE6AB6AB17E7C26A712E3C3339740BE1D7
-:102FA0003F96DFBD1AE988A547C20E336EC77F285A
-:102FB0000E64EA0F474635523E8D3BC97DEF3B2BF1
-:102FC000A3E7F99D34FE43E679AEDD85E35F37CCB8
-:102FD000BB08F9CC159459279E63F36F27B9FB1CE6
-:102FE000E68D824E335D6F0E8E80FD6EAA14F1A6C3
-:102FF000862C4417EBD1783E69A4B8D187E7DD96DB
-:103000009189EF7DBF2AD63965CC2919C7DD028A9F
-:10301000CEA689883F83F2D88CC5204BA00CE6FE53
-:10302000018CCB78500F28C27391B7F736401BD86C
-:10303000876EA12F04AE00FA41FD6BBC3D1FC97C19
-:103040009AEDE2F3AD409467E0BAE3F3DCCC7CABFD
-:103050003EC5C8F027807F7ED95A0FE56BE5ACF4FA
-:10306000E039D9A60569BCF8BCB72D396C34C21556
-:103070009FD766E64D99F952E6B8FFA7D29ED7E6EC
-:10308000F6F1730B9E9427F39D4A957F9742B3E721
-:10309000B799F935D89EF26B7218CFAFF13532EC93
-:1030A000E78632B60F89FCB3F8BC2A9043DFC57DB2
-:1030B000BF50BDA92DA6376DAE1B44BDE93CE4EF62
-:1030C000CF10DE04F2F7E7C41F31F97B08E91BE4F7
-:1030D000EF617C9AF2E5CF959B48BE6C91387D6E8E
-:1030E00081FDF85E8279FA049F6CC94A4C57A704A7
-:1030F0001D374F0EFD1AE7D5B2F9BD8F4B058F80F6
-:103100008F3F5AE537E0E35F13E1017E5A519E5845
-:10311000F24FFF9DD69324FF34BEFFC5DE1F5640FD
-:103120009EF0EF4B685215D989AAB0F751A8602BD1
-:10313000F31E6E9C1C17F5E792E3BD0E90AF000FD7
-:10314000EA0A56B93FAC8AEFEB3533F56155442FA7
-:10315000FC1EF0D600BF07CC221AE9034732F45A0E
-:10316000E45F963FE91CE746B3C8B3D51B4224FF92
-:10317000179EA3FD266A7FCD4C55F8C187D27AB63B
-:103180004ADA3752E558F95CEB4BABD2F2ABD0EFF1
-:10319000A187E83B0A5BF21DAA014BBB6FBA7E2DEB
-:1031A000BEDF92BF89F6AF03084E02793ACF71EACB
-:1031B000FE3C89F2849F9786C0D303965C02BA9E38
-:1031C00029F0033A08D5B3B7349FD5FFB1BA2AEA3C
-:1031D0006F11F6EFB79FB4E6092CFED9D3AB0CCB39
-:1031E000F9867E94EF25A08BB22ACE3FB2FB4EDB50
-:1031F000F919DFAEA28ADF0F595225E206E23C5CE4
-:10320000ECE6F6153B04F059CEDB6B6696CCC5F5C3
-:10321000039A0CC9724E9AE722D558DEBB7DFC5E3C
-:103220000AEBB58F63AEF35641A7E6BC40AF3770EB
-:103230007AD56AF169D62F9619F783F4D8F105F09B
-:103240002CE774C64E2481E7C984F0F4D9E1B9357E
-:103250004AB7DAADB83E38AF1B70DCF612A0BB043B
-:10326000F89D30B5640DD62BCC68CFCB3DAB3CBDC3
-:10327000BB2AB13CFDBB2ABB3E7B4F1597A7F75637
-:10328000911C493CEF2681B741FBAEC079EA6DF74E
-:10329000E1AF09F8A6A3FFD9B46B81D5DC6EE36E6C
-:1032A000E2CF8249E7E02FCECF378F69243BFB473F
-:1032B000423FF99193299877033CE64F940FF462CB
-:1032C00095A98F8447215E5E48A28F44DB25C9BB48
-:1032D000BF92ED48BB18BDA463D69134D24B4E7754
-:1032E000A6E1F9FFC28992847AC98F72768C4AA4CA
-:1032F00097EC49A297EC15FAEB8BBF73919E517C2A
-:1033000092EB25C52777C8A85FECABE272BBE84417
-:103310008FAC03DCC5A897C0387B845E82ED492F53
-:1033200039BD4346B88A4EF650BF6228A35E529418
-:10333000442F012864C4C3F3C51DBFC4FD8B5F6F58
-:10334000F514FD152BDD16F6F790FFC7ECD791BFEE
-:10335000294DA7FDB6D3CFEC22D596375FD8CFE95C
-:103360003DBE5D323A2B93ABDBFB615D5B59C60E14
-:10337000CAD7541A9FC0B2612894C7851FDE40BACD
-:10338000B9773EC09085ED1A9FEAC7F3C5707BF10F
-:10339000BB071FA6AEE076D05AE675CE8CC9235A7D
-:1033A0003A80669488F15C1E6F0BD8798FA4651201
-:1033B0001ED7794D7FCF8ECA3CE87FEF95E3E85E5C
-:1033C00050C98330109467F6CA546FFA870E8F6421
-:1033D00094BF0FFC3BAF06C69F2EC687F34EBB1BA8
-:1033E000DA2F2E747BD1EE2E97D3A9FD7DF9BCFD8B
-:1033F0004CE35403968BFA5D2ADE3F63F246F90EE6
-:10340000F4EBA25E02EDEFFB61A8CC03F5A9470047
-:10341000121CEF2D17F93734F887FC3BB5B79BF03A
-:103420009976C265F37BA482848B58F417575C9914
-:10343000C9CB8624924FE633DE4F913247F829AE4E
-:10344000655FFC14F4AD336C633BAED13DBEE4C5A7
-:103450005D6C607FD30FF12F53B42173601FC739A8
-:1034600075B26BF65402AE619FF63CF4D0DC6B1182
-:10347000EF3B14F2FB1EDD9046FBB4F7416527FAE3
-:103480009B8E029F72FFEEFA5B905EF76630334EC2
-:103490001441BFDDDEE87DE7E1B76896F2D8572634
-:1034A000FE0ECFC3BDC3CDF60FF3FE66D9D8760BA3
-:1034B000E675EC1DC9CB35AF3CD365101DF72B6409
-:1034C00077AF7B273D91FCCC9FCBF9CE2CCF2BBC8B
-:1034D00093D3F139FA81BC9F382741BF941A6E7F8C
-:1034E000ED5D06204D443CE9D3E6009FECE9BBAB23
-:1034F0007D024C3565D6861E92A3C3FAD72692FB71
-:103500006573F8F914290E933D06363EB787997214
-:1035100000F35BE7317512DAFDDB67BFF0F36B6137
-:103520009E5F148D9F2427E06B7D4E5EDCBA5E9318
-:1035300057A25C7AEFF8A24472606B953ED7BE1E2C
-:103540001E3F6DD9A110FEBF3CF7F49398F71E29DA
-:10355000DE41FEBD3D7F74B04D406F7B2670FD1F88
-:103560006FF0C9D98302DF43D313D01DC077732214
-:10357000F8AE9ACB689CEA295A1DD6C7C3ABA21FE6
-:103580001CE00535CB8F7224E50FFFD083FECE3DC6
-:10359000FD0E72BA9C39D129230976F4E595A2DA99
-:1035A0007A5DF5311949AAD8FBE0660C0DEB1B6575
-:1035B0001BFF4DEF4BB59597370EB39597368C8A19
-:1035C000F123C37B42636D65B7EF6A5B39C026DBCD
-:1035D000CA8BAA67DAC62BF3066DE50ADF5C5BFBD4
-:1035E0002AF57A5B796EFE525BFB1A7FBDAD3E54C5
-:1035F0003051C12B7E40975B115F69BD1AF1F9967E
-:10360000BEBBBC481791E210D9DB47327A72D09F1B
-:103610007D38C977E77E394716E73BA8462827E17A
-:103620003CDF94156B1FC8EBB7F9EB5F98C3F5D47B
-:10363000EFCF89F7D727BB27C7CFE7F3BD1F177F8A
-:103640000ECFBFEA2E924B1D8BE430DEB76AC97FE6
-:103650003DBD1FD7B388FB193A72609DE994AF4115
-:10366000FCF5E2E21B4663DC2D355F1F86F2DF3C92
-:10367000BF83F961F60ED4A77AC36C2CDE3F837248
-:10368000BDB887162CE0EFAF10EF57E313CEED7205
-:103690000BBEE2CFE38067E24B6036B0D97FF6D253
-:1036A000F7FD1615707F50E9E97029DEB79EABED86
-:1036B0003BC0AF5573F9F38BE2FF9F9DE4DCDE372F
-:1036C00067AA9D7F901FF69C587856F9FFDB26EE7F
-:1036D0007F7FAEC9C322B0BEB79ABCF4FC75938F8E
-:1036E000DEBFD6A4D2B3AD299F9E91263FD5FFB2AF
-:1036F000A9909E079A347ABEDC5449CF834D216A43
-:10370000F74A532D3D0F35E9F4FE777318D1C7A55D
-:10371000028F966FFA15422F3A24C2EB224CE59D98
-:10372000715293ADF21DF0FA5E22BC5EEC391229A3
-:10373000EE1E15E2E756423EF2CC35EF8D713D7933
-:103740009E4E323F0A9F0BFD77D931FF9D1B559A44
-:10375000A104A73477F8E0C1B957F871F666B1DA79
-:10376000EF717BAA55A2F3C63B91CBF347432524C7
-:10377000CF874F4C2CCF7307C8F33A3AB7D841F4F0
-:10378000AB62DA110AE3069C7F6A42BF883124F7F4
-:10379000AC78A078A68907CB7EE5CDBD88FD8A5F91
-:1037A000FFEC22ED2AC427DE53710E1D788E5CD10A
-:1037B000FFB186BEA9E70B38BCDB8F2F1C82FA8ACB
-:1037C0001B9D52A4AF80E25688FBCD843EF2685721
-:1037D000C3AC81E3FCB6B89BCEF5FBA27ACE3F9199
-:1037E0009E13DF0E7E0E101EF0DCB2E021811C283D
-:1037F00049B4FE32F987FD9BA0FFDE7E467E33157D
-:10380000756A80FF05857FC761EF4907E1F98C473D
-:1038100022F9E85E7FB7077DDFCF7F8DB7336A245B
-:10382000BADF90B67F8F8A7A6AA05F1F86DF232B6C
-:103830008C5439F1FBA125B326FA532C7450A2D82D
-:10384000CF49D454A3E70E39C586C6952F8BB597BB
-:1038500071FFF362E55CBA97BD1CD7B5F0542353F2
-:103860000B84FF35319ED64816BF9BC2FCEDD37347
-:1038700049EF3C7019C675C6B3307D1F02CC8390EA
-:10388000C59F20A787E8DE9E69A77F2469B7E17CF2
-:1038900003C66FD0282EC71C0E8ACB6D98ACDF896B
-:1038A0007432206EE37DF92F129C69ED0E1641FDF6
-:1038B000C2C87411FEE2F7EB8B8555F7E03CBECF32
-:1038C0006CD7EF90ACDF11B842BD8EECA933604FDE
-:1038D000E13D951685DF9F32DECA087711902C1FD7
-:1038E000F5B67BE5ABFDB8FF8FA4FD3DD947EBC036
-:1038F000DE42FB6B9B90C30FA01C86E73627B7B751
-:10390000DA9ADDDECE6CB4B7320D071C5C1FA68CD4
-:10391000093358E723426EB9D9F221A10967815FC3
-:10392000D827CEE8BEE778C9DE10E57497EEF81325
-:10393000DA7547E430FADDB64E7CAC7625E26FA24C
-:1039400087C7459588BA001534AFC1B22DF7FB651E
-:10395000A6BC8B7EDA76506630FE7BBFB89F9BE1BB
-:1039600077D8F49D2185767DED3B8304B70B251137
-:10397000DAADD9AE30E6E9A828B700EE769F83F835
-:10398000AB55E5F2A1355DF37813ECEF16C4B73B08
-:10399000F9FC726EAB17FDDE3BD21DC4BFEDAAB2BF
-:1039A0003517CAEDE90AFFEEABEAA84C94C7F2CE90
-:1039B0005C9EC7024D52284F2AB090F49D64F37468
-:1039C000887D37CBA905BA467CA6FA43B89E96F403
-:1039D0006C09F7C5ACFFF15C497C6F81FB95B70AB8
-:1039E000FD2935BF3B827E9DB691AB2723BA3CA013
-:1039F0000FBD0BEF3D05DDA43FA55FE6D213C1FB74
-:103A00007B31DE56A7BF12F1B935C3C10CC0DFD67A
-:103A1000DC2471AFB95C8F6C51278588BE011FE330
-:103A2000A581EDF68B7DDEECDCE1C3FB6C5BC72F83
-:103A3000A17CB1ADA3B97CFE4A755F577301F2CD8D
-:103A400057D89F906FB215DA3795F93D78CEB57992
-:103A5000152FFA05A664DFE30958E45C3C9F38475C
-:103A60002EACADA37C82543F22BD4C3E44DF1B698B
-:103A7000F383DCCDC57CA646AFF53B02A0777F84FF
-:103A8000F2E35C74AA32DD83F885F1898E92ED5FF2
-:103A90003C3CE92899269DA57D965E9BE83B16F95E
-:103AA000D50E1BDD38CF4137E782DF762EE6C4CE58
-:103AB00045DF21DF6A8C77DCCF78FD65D5EF75A116
-:103AC0005D1F5FFEACFCD9A2EC20B9DD32CE45F41F
-:103AD00014DF7F6B2E87E7E8CF7F4FF3A1FB01F761
-:103AE0002DCBC3FD4D0F140E4D492497CBA6E8FEF8
-:103AF0006A8B9E9355DA4DE76D4A3523BA4C57438E
-:103B0000DE71304E7AAF0C340AF8767CFCE763EA5B
-:103B1000C5E351D9D1C842305E66AF4CF4893F1F2E
-:103B2000831C1C22E4E096CBFF95615EC9F6B18A46
-:103B30009FE7B3BCE73FDB799239CBEE4FBA507FBA
-:103B4000D1FC6A91DF90C252783E51758942793C2E
-:103B50000E7ECE6AF0DF08212224B1FF2378C89FB1
-:103B6000CE49C6FD64D9CB18C9CD685E0B7E9706D9
-:103B7000C7D119E92378B116DB5DB686EB5B39ACAA
-:103B80005FC278E0E598DD2323BD73F97986E538D7
-:103B900028AF07A6C1BC14C970D0B9F8F0E547A595
-:103BA00000BC7DA068F544C447FC3A1A06ACE3ECBF
-:103BB0007830E11C6C3A35CFEF160F3F8F3538B8AF
-:103BC0005350598EF37F96C91BF9796CB8BD785E56
-:103BD000B7288DCF60197A87C85F1AE7FFFC308558
-:103BE000FB47A57B98572A22FF673EEED33A96EA19
-:103BF00047FFE41045F7607DDA3885FE5E03E8DDB7
-:103C0000D331DE12B3CBD5749E47B78EF20D7F82CF
-:103C1000E71AB4DBFFF1D9E5D1B3E738D73A7AC771
-:103C2000A5937FDD539F86F6F873BEBC4368DF9C87
-:103C3000F1F03C30B3DDFEB8EFA2B40939F76AB554
-:103C4000F0A3A77C2863FFEB7CAA82F976259E89E6
-:103C500024DF5BA4C4F18237847CBB427D95D3D939
-:103C60001AF37B666B48FEFF2643D06F83BE94FC3D
-:103C7000CA42DF639AA67AA7C5F43CF3BCF4295E76
-:103C8000E3761C47E4610D58E7FEDB187EA785F953
-:103C90002CFED93C9C7F4834FF8EF8394EBF4B86B2
-:103CA000CF0E611FB7F84A287FE30CCAAC04F113AA
-:103CB000F3097AEA4F514E4DEDB1CB97B47CBB7C02
-:103CC000697734523E987135F362BE08ABF6FBACAF
-:103CD0007A32E8AB87AAC93EB5EB9D6B6A18FFFE46
-:103CE0007696AAA09F26E809308C4B28393AC3FD66
-:103CF00070F9FC67DD8FAE6AAEA7B4E5AF0CA15DCD
-:103D0000B37DF697082F532A797EAAD90ECECBA37E
-:103D1000D516FBC6E5E3FAFA797F67C9EBB8A0EFE1
-:103D20002C75CCBA857F67C9B792BEB3F41CD02579
-:103D3000F2CBFE0C3D0DF5AF0BFDCED22D35E23BA7
-:103D40003E293C1F45E9E3F107A54FA7BC1297EFB9
-:103D500014C56FAE137928F1FE22B7BB91E26D91C5
-:103D6000E2C6A5567FB189BF2E41D7BF2DD6295FA8
-:103D700028D9DF8930DB21C6705D6EE10FDD52BCD2
-:103D800081F0BFB0328BFC518AF047B94EE9941FE5
-:103D90001C9EA267D658F0EFCE31E8BC4BFB7BC629
-:103DA000EFC17FC4EFC1A76D622578EFBDE4E349A1
-:103DB00014A72A89A4109FCD3EEDA7EF5897C94FAD
-:103DC000B7E741FDFE5E85F2F2F6CF4ECDC673ED4C
-:103DD000835EAEDFA6EDBFEAD017A15CDC5B8F3E51
-:103DE00001903B00CBD081EB987DDAF199ECCCA926
-:103DF00068675AE225E6B83F683A48F4F16C530F19
-:103E00003DF73445E8D9D1D447CF42450BE27A0A91
-:103E10007B2876C9669C807A0B1C856F417F0B3DA1
-:103E200078A7E8D36B88FF7A6CEDD2F2FB6CEDC01B
-:103E3000CE9D89F8557C1C9FAE6AFE7738E6F7B1B7
-:103E4000CD92FA3F4A5E2D473C0C82BC5A597356BC
-:103E500079C5E3A9257DE27B63A6DC12FCF8976AAD
-:103E6000957F37C9E44B115735CFE976FC15CED392
-:103E700096CC2F71F966E66F887B8CE6F7EAD7D788
-:103E80009CDC8DDFBD6B7BD3ACFF78B766A967C6C2
-:103E9000BFADC6FB28FBD0B8053DF4B7353F5E8DFE
-:103EA000FE8625B5598A06F00531009B15BB476390
-:103EB000E63BC6E3ED780DB7878EE479C90FDF06E0
-:103EC0007BD29900CF2FD708BB4DB5FF3D90D424AE
-:103ED000F7872262DC43026FED2E9EA790EC9EC80E
-:103EE000D745FB64F7447E5523E2F5E7B817F21D8A
-:103EF000D1EEFB38EF70CAAFFC27E423F3EF75FC7B
-:103F000040C013FD3B1D3E96709C2E217747CFE3AA
-:103F1000F9C92E9F46DF4583F19EA2F1C4DF5530DB
-:103F2000EB679C8CD6FF33D547FF7E824E7E22F313
-:103F30009E5ED7E1D776372BB1BC9CB6E8F71679F1
-:103F40009ED3FB02FEF8A7794F25F65DA9C3BB35CA
-:103F5000CB77A51E3FDCFBAEF8EED55EA25F713FCE
-:103F6000675B0C0F3FA6F771DF19D853F3F26EF1C0
-:103F70007DC5FD047763DCF7BBD8D1DDD6EF266CB9
-:103F80003BFCD66AD1FE20B517DFFB4A4017826E94
-:103F9000FB77E3BDD1F318EF75824F7CAF6B630DF8
-:103FA000E7A364F40CEDFBA87DF43BC6F51E3C577B
-:103FB00062DF317E83F0731EF83A46E3E8E6BC4CDC
-:103FC000E443717E31F3C94CBA90E7713ADD5C236A
-:103FD00099F796FE407858356878F880E089BB9F5D
-:103FE00074AE753C3339F411F5F345F394FF83CA8D
-:103FF0009F111EF35E593C7F0C9D2799F9D129F33F
-:10400000709E9CE8F73C53E725961317342F8C9B42
-:104010004DE3C6BE133A7CDE20AC87A9E7975FF27A
-:104020005FBC10FE351071000000000000000000B1
-:104030001F8B080000000000000B0B146060F8519B
-:104040008FC0DC687C5AE3BF4C0C0CFACC0C0C978C
-:10405000D81818DC38191844F8C833E7329ABE87E4
-:1040600040B366F130302C636560D809C4865CD8F3
-:10407000F5D90922D8C7817E5F05C497E91C06A33C
-:1040800078F0E03A11068629A208BE8118AA7CBD04
-:104090000882AD2745995D2E40FD00C5F694E2806B
-:1040A00003000000000000001F8B0800000000005B
-:1040B000000BD57D0D7854D5B5E83A3367CE9CF921
-:1040C0004B4E92012721E0991031D840074C145AE9
-:1040D0005A27116D14D4887FD17A7B07DB228ACAD4
-:1040E000D47A956BB199FC4F4280008A142D8C3F95
-:1040F00054B0FA9A2A5AACB577A2146DF55DD15A2C
-:10410000ABBDB42F566BAB551B5B29F415E5EDB574
-:10411000F63E99734E66328348DB173FBFCD3EFBB8
-:104120006FEDF5B7D75E7BED3D0A5441D569008749
-:10413000F18FA5F7F900A03E93CEFAC605CB1EACD1
-:1041400063FFF6B923DB5832EBE97995B1DA4CFD20
-:104150007A90002600343E7DF91F81D5FB2F70EA4E
-:104160006EF6E9C9C0882FC2F209C909D8CE0D0D73
-:1041700065E70459F94147A48FE5D3871C7E60FDAC
-:10418000CC04278DA383E66F9EC1BECB171483A9F1
-:104190007F7BFAF94D32A4CB009EBA05E46656AF98
-:1041A0002B70EAE5C37E80E75BD37F7DE304806804
-:1041B0007ABAACB37E76B73E43F91FB7EEFDEB1B80
-:1041C0002E801894D0388DF3DE9717B3764FB9A0B0
-:1041D0006590B56B8C4AAEC5A6F162623E4F7944DC
-:1041E000B9D620672D0FB072F6BD31787ED6F218A1
-:1041F0009B11D52B11FD1C1C76623D1D467C34CFD6
-:10420000438BB2CEF338D1CEC8D70DF3F93EF9EBDC
-:10421000030B900E69286E76637AA86A1FE27B48CA
-:1042200095740833FC0E9F4DF84D237E5917075E99
-:10423000E3F87EEA4347A48DE1BB51D5FC11960714
-:1042400099D1839537FA214A70C92C65702C10706A
-:104250005F2AD24598125D74A2CB90CAE8E2CF0FD4
-:10426000EF699B1482D798E710CEB38076065DD9AC
-:10427000577F7380B583EC7C30163F6CBC938F1CEA
-:104280004E03AFCDF386FEFA860AF47798FD7F865B
-:10429000F6D3BFBE5193C99F7670AF25CF381AD4DD
-:1042A0005318BCF84F1D53F98361A33CCCCB719CD0
-:1042B00064ABFE4135E3BF8156F8A09AF1DF9A5610
-:1042C00095F2FDAD1AE5FB5A43944FCAAC09A363BE
-:1042D000B21F5209D6BE24CAEA9BC62B9EC3DA99E6
-:1042E000E00B44344BDE5713B2D4F7E8BAA53CA92F
-:1042F0005FEF4831BAF7D63A524E09E16032722286
-:10430000C2A152CAC07D39C4E653CD9BC06A97FE94
-:10431000CB2A84E70527B4B37C911E755CC1F253A8
-:10432000424E4845D8F8452300ACBFE42D00EB5978
-:104330007FFDB34E715CC1F27D73DD9A530348B1CA
-:10434000FE936ED6CF4769BD03FB99A144B01F18F9
-:10435000907F8B7852D97F87AB00A6EACA6B8E22FA
-:104360008070827D37CFCF9D08A15C17CFB17E9F33
-:10437000AA2FB91658FDA960FA1ECED0D318D7C8F7
-:10438000DBC7B38F73FC0A5BFFB67EA7E8C30D5A89
-:104390006DA6DFE361A44DF3FF2BF71B6D94904EE8
-:1043A00011D053B38E1DDCFE157F2979E3E40C9EFA
-:1043B000FB5D5C0FDAE56D181CA43F409E005106C2
-:1043C00097AE3B527DAC9FBEB083F847EF8214EAB4
-:1043D000ADD593F7C631DF1756F476960FD7EC6953
-:1043E000916602AC9AAC11DFF53DE186F6088723B1
-:1043F000C8F8748AC1A71F0D3754211F4A1059CF1E
-:10440000CAC3FA9B6D585F7BD9ABBBE68C9D1FACD2
-:10441000E0F3A73C9BFF08FEA37E6CBF3FAB57A217
-:10442000CDC8B70948B9193CBDD5ED4D0936CE9672
-:10443000840C283F7DB70CBE82784E9EC0E1B5CF7C
-:104440007B8AAE2C46BE06F3F86CBC29D5172FC369
-:1044500079D9E130F4C59DAD1A4419BD36B7D6906F
-:104460005C6E69D506514F6CFED09915BF0B24AE1A
-:104470009FEF70353B12B8CE4E77A4B649D85F6C2B
-:10448000F3550CDED5F51367E33A70FD748EEF0F2C
-:10449000FA05BEA5D4A540F5159DEADBE47F8B1C8B
-:1044A0006D47795E1D2A8304C3EB14D7DEA6A99855
-:1044B0005F51352B8178AFBBFB35EC6FCAF4693A9D
-:1044C000E2636ACD9BFB502E377F9422B99D5AC37D
-:1044D000E49ACD73CA8A8983D58C4F2AF5D4D7A89C
-:1044E0007E8DA2A7A40C5F4E86483BD2EBF8161F28
-:1044F000A4B5FCFC39393E3E7F1E3B3DF08F91ABAD
-:104500004936B9BA23875C2D941CC42FA37255C3B6
-:10451000E48AE175C74956B9DA3C39F55631CACF54
-:104520000CCEA7763E0FD7BCD98074ED67F2531A34
-:1045300002A8700FFC5942399CC5EA4B542E7D9954
-:10454000E5FFF40BAF0E284FB59CAEF9E4CAE0E7E7
-:104550004C6A1D774B9DA3B19981FAB3AB36BEED82
-:10456000C6F16A151DE5AC4FDEF467C4B35EAFE873
-:1045700009C9244FB55C9EA6D431F9C92257F9C6A2
-:104580004FB6A6E0752647EB5A43245F6B5B7592E6
-:10459000AF5542CED660D5B92C2FE40CE6CCA67C24
-:1045A0002EFB13A08DE44ED5F702DAC1EB58DF5095
-:1045B00081DFD3D1E83C80D23A230F69075BDBD798
-:1045C0008E9643142A09DF009F41F0FE9888B2F6C8
-:1045D0005A1DCF3FDEF6C7440713C2751E5EFF09A2
-:1045E000A9A62131CFDC7E0FF56FD467F97463B5CE
-:1045F000A93FECDF028FA301EB1BFDBDDA56D19082
-:1046000060E3AF1579A5BD84E78F71FF4CDF841897
-:10461000D3439FAD9FD592E827F16C34EACF8C73DA
-:10462000BBF456346129FF4314F164947FB7EDD98C
-:104630004482D57F1F9ABF25313A4C9F1FAB605BE8
-:1046400018F036ED0534A5D6D9F09D99DF0B34BFAF
-:10465000400DCFDFDDF66114F16D943F2A05DA10CD
-:10466000DFC837FE89CCAEC27FB23157FDE4474B7D
-:104670009FC37FCF29052867E3E803CCD264B3AF9B
-:104680004E01EE3B7C35F29BA3FC0719BE63F03D67
-:1046900028B174FABCD865B81466812F6186CF182A
-:1046A0003F1FBC061CB9F9938F6FE7A3C633E73CE5
-:1046B0003F8FC99B77AF2BC2C480CD4393701D2819
-:1046C00045A0985E2BF9E8E721DC8A81CCF478607C
-:1046D0006CBFA5F32B206592FB4F9A9EDFC23CC7AF
-:1046E000DB4B66BAB2FCCB663C3E88F5EAC7F29D6E
-:1046F000313F8F989F67CCFCEE69C1F9E5C29B7D85
-:104700007E6B3D032DCD59F6119F7788FDEEE7E7CF
-:104710009C87FDB3F100F597471F213B5EC3F1D89D
-:1047200056B3F8A39FB720DFE71A4F9BC7C6AB3934
-:1047300076F8CCC7C701A6BF888FEB181FD7E6E66F
-:1047400063BB3C1BF3F68A797B73CC9BAD9421DC75
-:104750008FFDFF3AEFBFC87C5E37B03E127C5E5CD7
-:104760003EFE49F3FACB736512AEEF088F93F373F5
-:10477000281B7FBD2EE9967DAE9DAF73CDEB9FC507
-:10478000A763E7353E9E8FB51E2A54BFB6BFEC2502
-:104790003CF6D5B27D02EE0B9E3983FC157DCF9D94
-:1047A0007E1CFA1FBCC94F41B40C601AF6CFEC89CD
-:1047B0003EB42FB0FF4D7505D917FDAD30D8790245
-:1047C000C023450C0F7E9A27B5DFCCECCF14537075
-:1047D000752FEC5617637EE9432AFA95FA84BD5883
-:1047E000F7C2BDEBCE64F8F4CF289DE564ACD0E70A
-:1047F00031BEEFFCE934B4E36BD977C45B80F7C713
-:10480000BEBF80F50333F8F75C70F994540CEDFBF0
-:104810004084C165E207A3FC6107B74B77A09D7593
-:1048200022C2A993BDE5F30EC690BEDECD8A7E7787
-:1048300096FDD2FF16FA74FB8C3D092FC285F61A3D
-:104840009BF7937775575CCDDAF9EE04D2E7BE9A01
-:1048500054C2C150E7AB03DA0DEE7099E85E4970BF
-:1048600009BA2E924E67EBA4CF96DF3C5AFF8B64B9
-:10487000B74CAAE5E58FB6FF4743876C2A4F5CD952
-:1048800010ADCC943FDF7E6D03AEBBD3D5D8AFE681
-:10489000B1F1A733BDD7C1F03A5D1E70C4899EC186
-:1048A000ACFCB27D9BDA92627D6CBF6B63D557B373
-:1048B000AC238C8A4467237FD2BD56BEDE21F0B77D
-:1048C00059E0B39FA117EBFB6A07DA119F27DD0BB5
-:1048D000116738B7BECB49C73BADFA6EBA6C9DD7EE
-:1048E000B19ACFFBA0F1FDB6E89FADEB2F3AF87C73
-:1048F0001C284727311A384B8E7E3E69C413B723D4
-:104900007E93ADFF7FD47CA7FBD938C14F7E1C9F1F
-:104910006D9C5CFDDAF555A2112419F7FD151041C7
-:10492000784AE6C769FFE2F4EF0D25989E95B561D8
-:104930004A5DC1915082D97F4A482FC7D45D192959
-:10494000C7EFAB3F740A79EA6943BDBA6634DFDB6F
-:10495000867A742DE6497E5651F9FAD1FC6ACA6FFF
-:1049600098CCE5EB78E76D43A887AB503931B85662
-:104970000FBDDAF2650657D96E7F044D8D327F0484
-:10498000500F1BE56B86DE0AA968C7EDF68387F139
-:1049900043A9160573FBB5437F0BE19EC52FCAFDE6
-:1049A000C1664BF9FAA1E9E521D43FA2DC1B8A518B
-:1049B000F986A1B9E53AEA93DD7E0DBFFB2AE3341F
-:1049C000EEE94F5F43FC925CE820BD6EE031B970C8
-:1049D00036F9952F9762D39D8C1E0D4FF7AB68FF6C
-:1049E0002777D792BEA7358BFC49F2FF457E245D21
-:1049F0004AEB985F7BF353825ECE0C3DFAF1BC82AA
-:104A0000FCC0FC9C2229CE29128DE934F9678A3832
-:104A10009D184767FCCFD4FE998CBF9AF27B2DF985
-:104A200080968AE23E5E0E32FDC0DAFBA28928D271
-:104A30005DA9E479A73F9246FD71C75510F1EB4897
-:104A4000F72860FDB57379DE156CA6F6BDF53CAFB1
-:104A5000846209CC2767F1BCBB329EC6FCAAE93C44
-:104A60007F874167D861E503F813D1BD7734EF69DB
-:104A7000C7F2A4C137E06BC7F2559FE37AB6426E26
-:104A80007812F17FC7D063AF2E61FD17233FB0FED0
-:104A90008B97462C74D9AC5BE9B259E7749955CC25
-:104AA0003081749075A2C7ACE3AF776878DEF129E6
-:104AB000EE176B7CFA471EB4F7EEA8994DE55364E8
-:104AC000A7F00F707FF836E10FA862D285FB9F6DCB
-:104AD000C21FF0E46DD38AB1DD939B7F48F4FE3CA6
-:104AE0002A11D66E550D3FBF7990ADD3E8C7FF6E42
-:104AF000AB4AFEBA5DACBF18D3DB8FB6AA943ED4E6
-:104B0000AA418CF5FB3DA6C7313FC0CAD36E3A0F10
-:104B10008034FBFED84E47538AF5BBA9959966AC05
-:104B20009F8DAD2AA5B7B66A7F91597FEB5B439401
-:104B3000BFD2B1688593FC1A030B66B2793DF2626D
-:104B400035F9F7E63EE868C6F6A00D5C706E5DE6E6
-:104B5000BB819F2B1D8DB720BFFE60A7DC847A062A
-:104B6000E4F8B333B2D76BC77AA73E283753BD609A
-:104B7000FCE7E704B3D6EBC17A0FEFE270831A7952
-:104B8000B6367B7FFD08EFC9DF77F0FE42919F2F9D
-:104B9000CCDEDF3AAC37B84BE6FDF999CACE5E6F92
-:104BA000238E1BF9BE80AF12CA16661FF70EEC4F9C
-:104BB0002DE5F6CA9C28905F6CD235FA5D92896F1C
-:104BC0006EBF765072303AAB65A938D63B657E4AE7
-:104BD000AA62E97157A72407D3779396B272068F1A
-:104BE00007FB61E9EC39BCFC762C0F98CAB13D4B50
-:104BF0003F3D8F95B3F4B865D67263BC495F815170
-:104C0000BF103A5B27C5C0B05F283FCDC1F38F3BD3
-:104C10007FDB80FA699AC2EBFF19F3AC9F492DD66E
-:104C2000F6D3BC3CFF5BA37E116FEF90795E6566A7
-:104C30002CEDD336AB29B4BB6E3DBF3B74853F33FF
-:104C4000DFE0A264CD15A6F9DDBA6873E88ADACC94
-:104C50007C8217DC5983F95CEB8A477740D4B40E29
-:104C60004D1BA8257BF75F5DBF5C645A37705DA95B
-:104C7000C07581E1A782310A9633BC25B8BDCAF15F
-:104C8000B6FE2C2BDE4ACFB6E26DFDD956BC952E72
-:104C9000181F6F3F13E3E7C21F1B3F6A1EFFB68B4F
-:104CA000ACE34FB8D83AFE6D175BC79F70C9518F00
-:104CB0009F36F3CD8673ACE3979D6B1D7FC3B9D64A
-:104CC000F1CBCE3BBAF10DFAF40E7DCBBAAED735AF
-:104CD00083997EC9A1DE90655D8FF075DD285F3513
-:104CE000F45808D7770FAEEFE89FA9E1EBFBACD7FC
-:104CF000DF0FA1DF7EEDE7F6846298B2BA7B6B33FB
-:104D0000EBC6939FBBD1713FEBF7EBD31D74FE3322
-:104D1000F4B94755D4FFAB6A6693BE4F8AF3DCBE45
-:104D2000D6F4FE6B5C997905921E889AFCF7A3F67F
-:104D300012FCAE01F93059E310F652797B94D9A2F6
-:104D4000EA74D992EFADE5E5377796B727D0972289
-:104D50000F96E33AE4AB810F6A4D7832FA37C637E3
-:104D6000E0C93D3EDF1767C69F6A1B7FAA657C23AB
-:104D7000EF99C1CB13727523C27387D827DF20FF49
-:104D80008EF4CBB1836F467BB4DA0C1FCF67E0E3C0
-:104D90007903BE6FCA331B13D5FF48F84EB5E1EF58
-:104DA000541BFE4EB5E06F853CE788F067AFD76FC8
-:104DB000E3CF6510BD499E807204646FC6654D9C4B
-:104DC00007F1FEEA64215F383EFAF2AF55522784BC
-:104DD00079F922B6AE5D2E8B7D98A8DF64CB1BF6E9
-:104DE0002B2E4787C98F97DD7E5580EB6DB6AD8B37
-:104DF0006C23BD1E2179CAEC3BB81F43969BA3CD03
-:104E000059F4C146999F0F4B5AA405E194FD0AF944
-:104E10001373D51F9025615F272CE73BC530927631
-:104E2000221C21A0F8243874817EFE8CB170287277
-:104E3000730CC7716A0AA05EEB2CB95837C731ED05
-:104E400030E00945091E45E3F02872249ACD0F7C15
-:104E5000B7CCFD16463F0C42D17E84CE050CF8BA85
-:104E60003CCD2D8BD19E2F51084F9D01EBB9DE6FAC
-:104E7000C4BC9E1769A7884BB28F07188D81F14B70
-:104E800013E7901DDA31A75145BED421A2A29FACF1
-:104E9000D39F3D9EC848FBD1EE3C11F95E25FB3304
-:104EA000C9EC52CC7733BB14D34EFF434DB8EEEC74
-:104EB000473ECEE2A719D5731107A44DFB6D5F8D58
-:104EC00017D2E6FDA8D8AF7AF452CB7777A8C2D232
-:104ED000CE3551267BBED3EF48E13E3F1FFCDD02BD
-:104EE0007EA35E8F1C57B502F6CBEE9015DE63876E
-:104EF0003FDEDEE71AD4B2C1F549E1CDE02B7BFFFE
-:104F00004A991227FB596E0E99F9DFE9E27CAA94BF
-:104F1000A971B29BD55CE55EDEDECFCAD12EF63735
-:104F2000EB78FEC2449EE2C4549403137E26897635
-:104F30009D2E711E0D713A3792F4780BF2915AC979
-:104F4000E4471ADBCE48BDA27DCF875F7F85E4634F
-:104F5000824AF221E923E497B78FF3801C9DE8622F
-:104F6000E926397A1CA6AE8F9CB16C7232C1C5E5B8
-:104F7000586D6ED6557E249E15FE9345BF0306FCE4
-:104F80008938F99B0B85BFAA40F84FCEC03FD35557
-:104F90004FF07F1AD35CF0CF10F094416408F7ED26
-:104FA000C8A0D82FC0F9BAD91FBE46F45B26E003CB
-:104FB000F81AD1CD28EF157828743EF30A9CCF9AC1
-:104FC000CC7C9AC47CCE1A6F3E5F10F359E3E2EBBF
-:104FD00095DAD4AC87185F95E6A0CB12D1FFE651E5
-:104FE000BA7CED88F8EAA202E7B124338FC582AF1C
-:104FF000AE186F1E3101CF8013E6BE11443349ACA9
-:1050000037B0C84297AD065FB9F9BA0170BD852EB9
-:10501000B7897E0A9DCFF202E7B335339F6F08BA96
-:10502000AC1C6F3EA6FA6DA27EBB902BB25BB6BAEB
-:105030009E6847FBE301B9B9DB559F198FD5EB316A
-:10504000D79BD4D567D45B85DFA585A3F5FAC5F8D2
-:10505000C22EBA87F6635D686330FBE6DCAEE71B01
-:10506000D11E67EDD653FFCD7CDD64ED3698FB3F56
-:10507000B96B63BBA8773BD66B3BFD23A3FF4DE623
-:10508000FEB7BAD2061C77121C4DA3FD7DDB5C6F08
-:10509000896BB09D9F13566A6FFA4C764DA834CF3A
-:1050A000B90CD7BBAE602C398CFE4A080CA0DDD100
-:1050B0002DC7B70E233F30236F1BFB7E933B2A493E
-:1050C0006CFDD4A2F1FBB05E69C2AD39916E8DF179
-:1050D000EF613EE180668C8BBCDDF7CDAD985F2142
-:1050E000AB9A3B82F6964E47436B8232C5C97549EF
-:1050F000B104AE8B07E4D82E17D93DAC4B36CE4D5C
-:10510000653AC5FB94CC0789DB1D1CAE75BE2F2507
-:10511000110E37830BE383BB6C70B1F1685FDE3B2C
-:1051200081C7DB800C3532F6E7F446B0BFA1093702
-:1051300012BCC936B786ED9327DC48F0B2B2668A56
-:10514000CF73C509DE1E97AA613CDEEDBEEB36616A
-:10515000FCD68A4431D5273870FE53AB087E0FC485
-:10516000D38BC3A8BE06A2786ED3B550A1B8E464B1
-:10517000703DED6FFB16AAE4DFEFAB599FC076FBE5
-:10518000177A29BECEE31F008C032A5BA000C6C39A
-:105190007A82036467969EEDE5F94AA0714A3FCB97
-:1051A000E3655D30AC55B1B42CC9E38EFB6A1625BE
-:1051B00016A31D3387C7A34222FA22C6B79580F8EB
-:1051C00073560E61FFAE494E704632F42D1B186DBA
-:1051D0005F1CCB222FA3F55205D64B1756AF3429AF
-:1051E00017566FA0C07AA902EBA5793D379C5F9C4A
-:1051F000ED9C7594EFE72B647F18F16D45CCF21FA1
-:10520000B54FC2DC6E37DB2B2E5032F60AF299F323
-:10521000F271E158B1AF2DB8DB64DF04954090F630
-:105220001BA7C2A9249779DA1F684D0477BBF2CF78
-:1052300017252C6DF293E7ABBFAA95FB697395FB1D
-:10524000665E1C227D36E332915ECED359EC7B2D17
-:10525000A62D227F99C85FDE12CD325E83C2F57023
-:105260000D348F4B078F80FF4D3CAB674D6A645602
-:105270003F4B9C8E91FA6B1D36BBD1AAEF5439D1AE
-:1052800048E71C353C2ED78DC288721301D22F2ED1
-:10529000486B55B8178568D1E28919F9718526924E
-:1052A000FCFC77B913A439449F08E2D1CE2776BE1F
-:1052B000F0DBF8E268F9E4D263C427BEA4B320F9B6
-:1052C000F10D14582F5560BD7461F5FC49A9B07AF1
-:1052D0000305D64B15582FCDEBAD3A4711FED60539
-:1052E0001DE887F19DAB5AF2ABCEF55ACBCFF35BFD
-:1052F000F2FD6759DBFBCFB6B6EF3FDBDADEBF80EE
-:10530000B77FB8FBA2D3D1CF53A89CFCEE63CA49A8
-:105310008D3A7EFDD28579E44A4DD07ED223EB9042
-:105320000EE2FAC5D62989D2682A8B7DF75321FF70
-:10533000CFB9B81F272927685FFBAF3ECFEF2ADC24
-:105340006F64CC371FBC86FEFDBD53D85B76FB6B0C
-:10535000D4AF73E8F0E153508F00064B83A6B3A996
-:10536000A11F17BC110C15F1540FD0F9B4BDFF5E8D
-:1053700023BE0612A14526389E7373BFCA4FC2DDF5
-:10538000213AAF3D616308F7E9BD93A5AC7E968FE6
-:10539000147E2E5815F3919DD1A3ABA40F7B27F358
-:1053A0007B4CBDAE01F21FF786ADED55613F7CA48D
-:1053B000F0F17A6F8903DAFF5D276C6CC171DDE96A
-:1053C000FF049DC1FD1F93E3A0E3F86EBE0F70477D
-:1053D0001380EB82AA27E8FCDD0E4FD2884B868132
-:1053E000D022D3BC2F32E6C5E653C8BC5E57141A90
-:1053F0004F8B72FCE5C257FA08F1B5D4ADF07B6271
-:10540000210FE16BFF3CBE7E20219D8C8EE452D4A7
-:10541000292F99F9CDBE1E037805BF1DA6BC2E5FAE
-:105420003A2E3FAD12E7A7BDE88761EBB47EE76592
-:10543000E3F2738F58CFDDF045EAD7ADC7A3A8EFED
-:105440007CB569403BDE53ADCD767270A23051F031
-:105450001FC1DD197504291E25B299B1BC6F426FB9
-:10546000242DE51E47AD55AC727384EB5A9DDBBA13
-:10547000AEED877E72C6AE76C0D26CF7018C754DEC
-:105480000F5E3AEEFC57D9E6EFA88D0B3FE54A1EBA
-:1054900057C5742BDECB84502FD9EB3E89CD3752C4
-:1054A000F83C5F75733DA687C687636D2BF7A3AD88
-:1054B00016F4CB556F353AA031BED7BDAD03F76BAF
-:1054C00025F3B97C8CCA833C60E1DB830AF777F46F
-:1054D0007AF4368A730973BFC9987E057FDBE52DA0
-:1054E00099E39E8D21CF7F5374AE9FD401F247186C
-:1054F00072A7EBFF49FAAF7772BB8AFA21A9AF27EF
-:10550000FFF1FE6A05303ECBAE278CB44FE0E134AC
-:10551000E857F11E53DF4B4EBA176BAFE7C1CD9A78
-:10552000C9DFE7ABB1EAE57C7A66B39BE3E5E3EA82
-:10553000991F0ABA66D133B42E2FEDE97C0AE9D35C
-:105540002BE20C4B9B12B0D834DFB542CFFDBB5BD6
-:10555000AC17951C8E5E97D660A65309FBDE60D60D
-:10556000A739E8938BEE976190E0840C1CF6F9ED77
-:10557000107828C5F16BF3E3612C1D381F74BBB3A1
-:10558000F3C127359F2E81AF7C7CBC55CC67ABC067
-:10559000AB31AF7C7262F4FF30E2AB1EEBDBD603C3
-:1055A0003961A1BFD3C05B93AD9E6AAD67E047761A
-:1055B000733BC6583FF2F5FF6B85C363EF3F971C03
-:1055C000FE66540E13E4AF35C671C3E3E457D8CF7B
-:1055D000F474DF2C80623F48E837706A3CEE291093
-:1055E0006C06F3798F5D7F197A31973EB2EF67F2DF
-:1055F000D55782CAB8F69361EF948A7B5FAA881365
-:105600005E2F653FFFF9BBA01B53F405C5FB61F896
-:1056100008E2039A21B58DE244A3436D2C3F31A2E9
-:10562000E87DE81791CF18BA8BE527FCC80D7D11EE
-:1056300074C5CC1F1A62FCB62AAA366379851A1E75
-:10564000BD1F39700AFABBB83D06CE95AFE0FDE04C
-:105650008997C8807875C35C8ADFDEBF02EF8E8DC4
-:105660008567A20C30A994A5C26F40E78AB8D5BC63
-:10567000D08A4F5868CAB3FDE304D5B6BF2B70DE9D
-:10568000767872B5CB0B4F667FFA068EEF86F1D730
-:10569000B5239DDFA8BD5BE0BC686D36D50B1F74DC
-:1056A000828EF7DE0F4A941E7FD047E994831E4A0C
-:1056B000271F2C039D11ADF26009A5930E4EA2EF9A
-:1056C0001507CB292D3F3895D2D0C130A525073FEE
-:1056D00045A976703AA5EB841C161F3C99F250330D
-:1056E0009BC62F3A388BF281839FA5D47F702E2FD3
-:1056F00017E7ACEB6E8901FAB1155C87987C749D55
-:10570000B184D625FBBC6E55F9BAD22DE2D6BB6D5D
-:105710007AFB6151FEA048D709B900390E667F7A3D
-:105720004AE57A615D558CECF26E633D2C5F6259FF
-:105730000FEDF5BB73DCAF7CCC804BC003358BF237
-:10574000D0879FCBBA8331BA4F001023BD0472CCEF
-:10575000A277BB0DF8051E73F727F078C6A3C4C760
-:105760001E85C72D7BBE7067CBBDA877CEBC71E907
-:105770006E267723EED8CD2AF2FB17AE26A6BBE322
-:10578000BA9B43741FF18C8D74EF09CD72BC4FD15D
-:1057900073E6CAF8BDC4758C2E33A85D9B6A3A1FA8
-:1057A000ED5D7273CB77587F7AA7037413BF4E59A0
-:1057B000E905DDACBF0E959563FBCA1B4A2DDF2BB7
-:1057C000AEA9B0B4831AEE470F7DA5CA524F9B7F96
-:1057D00092A55ED1BCD9D676E2FCDC5FF7194B3BD3
-:1057E000B7DFC02B3F5F64F4B7AC1F3D52763A7E03
-:1057F0005D758CCB3797AAC22EF21746B75CFD1B9E
-:10580000F3CDAB978279E741F6EED7D573E7E3396D
-:10581000865B8BD1FD9523AF7F6CE751683DBBBEA6
-:105820002A427D5586FA44A2D48FFAAA0CF58887BD
-:1058300052A3DE6AC36E29504E56A3BEF19BF44DAF
-:105840003D93FB2CFC50EC195FDFCC14E535225D59
-:105850002DF8CACE37938C72D437B5F9F5CD24DB49
-:10586000B876B8EA3C421FFD93F54DEFEC8DB12FB1
-:10587000B39CE7D43B5BEE6169CFAC1B29CFF485C9
-:10588000DBC3CA7B4E5919BFC7A447E0D0CF395FED
-:105890000A7E289E63D51F46FF81884D8F18F2F03F
-:1058A00031E55AF270B9CD459FDF1FA55C1BFD7F26
-:1058B000D2722DF5AE3A22B91E5BFFD8CEA3D07AB4
-:1058C0008946489F86FB9269DE5407FAE31C031160
-:1058D0007EDF3346F13CBD3F75D17902AB41FBE23F
-:1058E0007A357A0EF24FBDDA7C1EA6D787F5E370C3
-:1058F0009D66F9F36DF90B3C132CF98B6CF94B6C2D
-:10590000F52FB5957FD15C9ED4F5E3D08F917CC601
-:1059100045E78649DDD194F53D0581A767D5E62F9A
-:1059200063FB1353271D877461F9AF527F1EDE1F7F
-:10593000CB5F49E365F257D9CA97D9CAAFB5E597A6
-:10594000DBEA7FCD9CEFFD68EAEDB8DE277EE682DC
-:105950006D59FC4BAF083DD273C2CDB1762E97374F
-:10596000935C4E5B19BF02882F00E176FA6DFB3F16
-:10597000C667667E7956E89B9F4CBE91F64D3D6C9E
-:10598000FF44F18DE8DFCB829FDF78C4FB5CFA55E2
-:10599000742F22597E3DF9397A2ADB297E61BFAE08
-:1059A000D0B96D329CBD7D6F2BF773F454663F5FA9
-:1059B000F88D276C89D7826AEE17443138ECC077AE
-:1059C00086B87EEF0A77937E55D25771FF46798C61
-:1059D000FC1BDB3C7CFD52FC71F22BB82BE359F72E
-:1059E000F53DA3F8B0FA3B7F22F06AEC234DF82096
-:1059F00039ECF2FC6937FA37929EEC72B6538CEFB1
-:105A00000A1536FED8F9F3F1EFC6CB2E28AFB67DD6
-:105A10006DD2C5E3E71393B91F4066E398FD0AF61C
-:105A2000F146E769DB67DF25F83CE9E1F1F7467FFE
-:105A30007678EE17F3B9DFA359E6256B7C9C7CFDE5
-:105A4000FF182F71A11F40B3FB21AC7AAE55D4775C
-:105A500005ADF572E127318A1F1EA765F06F3E7E06
-:105A600037C67916E1A2F385ECFB70FDD01C8AEBFA
-:105A7000D80F81813EDC37CBDA2BE817BE896D93D6
-:105A8000D09FDD2127C8BF90D041E3EFECF07389B0
-:105A90009B9C274550DFA922DE0230DE22688A5710
-:105AA000147ECEDB7DDFBC0FCB5724DC1ABE7BF22D
-:105AB00077CF543E9F432B28CEA297EDD471DC03C1
-:105AC0009E29297C4FC759DC4FF6BCD3392B9E2D1C
-:105AD000FED4EDE5727CDAA1B5A467BB997EC3F371
-:105AE000A56E39A696D6A2EB3A41F2DAAB8F1FD754
-:105AF000688F8F7469F6B8442BBE225E4EDFA458BF
-:105B00007F939E488B252ED0EBA1F2BF7BACF0F5A6
-:105B1000E8FCBE900E718A334D563A1C88B7630577
-:105B20009F31AE12E6F78F8210A338163524D3B812
-:105B30000E1FC76FAE714197DF31BF2B73ACF039C9
-:105B4000BAFEC6383FC9E0257ED2E7AB8DDB31FF18
-:105B50005327ADA7F6717EEF8D7DC66BD29BB21633
-:105B6000033A8717FD9D3581C77FCB95FC7EBA022E
-:105B7000CD4D6136FF8E4AFEFEA2ECCF132F516948
-:105B8000F757E43AAFE3E72554C444B4E10F7C5C33
-:105B9000AF882308C030059116A34A9F8A7104BAC2
-:105BA000C4EFF747241E6F3E8FE2CB839E4FBADFD0
-:105BB000CBA95F29BA0E0EFB8EA05F7998FC5C9F83
-:105BC00078BF79E0F5C09DD42F86AC1E2ECBF48B28
-:105BD000FA979C4A870E1FC6F334714605861D2E20
-:105BE0003BF87D2BA828A278C4AEE0F5AA99AE9D1B
-:105BF000DE2ACBFAAA68DD5FC3779494CA6BA2C38E
-:105C0000E3F06552C89152F995E870017E4C994DC8
-:105C10003F9B3FB45B89A5DAD05E9CE2E771AC7232
-:105C20009CCE477AA4D2D97D7526FEAD54D2089772
-:105C30003F124D609C634F992382F15932F4EFA5D6
-:105C400077D39C0B23E3C9AB5C29BF6D9ECFB7BD57
-:105C50008120C129FC871D79F8BD4BE8EB5CE52E5E
-:105C60002512CBA68707BD621DF3662F3FE06B7C34
-:105C7000D09B65DD490BFCF6943055FA69CE3EC8E1
-:105C80000772E59E57100F5D13CE1C5F3F6956FDEE
-:105C9000F4BA2FFA43EFF870FCD85B9F857EFE6064
-:105CA00061FB038803DEA775BEE414E7BBD122695C
-:105CB000229EDA1A7F11E864E5AE396E0DFDC9DE69
-:105CC000DA08DCCBF2A1D3D566790EBD1B47E7AC71
-:105CD000AE7227505C9E731E8F1BAAE17ED628FBF6
-:105CE0008FE2CBE68D1F4FE6B4E57F65A773EB2E01
-:105CF0007A3FC280DF885FB7CFEB07BEC6E1ECF822
-:105D0000286C1FB481F10BB8F15D3195D2B5AD1A95
-:105D1000A5AB5B4394AE6A65CC4EEB7F0DE56FC3DC
-:105D2000A673312E249E0CE37E2474EF2B78257409
-:105D300003E296EE19DD7306DA597D98E7F7421310
-:105D400012E627F3F2437D1BCEC0FD609FC7A89FDC
-:105D5000E4F547F37774A15DD827E26BCB56DD7B82
-:105D600006DAAD1B261BFEAFA87A91C9FEAAF1B9CF
-:105D7000B89F266CB4EFEAC27DAC4736F28F9E61C5
-:105D8000CD4314E1F1A83C7F8EEF07040FA9003644
-:105D9000DE45BE5D94DF7082D8975FB8280F1EB9CC
-:105DA0001FA3D7AB733BE842FEEE8AC2F8A68A7DFA
-:105DB000DA20DECD2DB41FDCFFD07AF752F6F532B3
-:105DC000233779D6B50B0B7BFF85A183EC0BD4C3AE
-:105DD000F8FEA2FC0B2E17C77ADC0DAE23C38B3A5C
-:105DE0002F16C5EE8B9A06D348EA9F78630D3ED6F0
-:105DF0004FF1FCBDB4AC28A134B71B0A1CBFD2279D
-:105E0000EE9BB179E3BA63E0DBB03F6E407A4EC8F7
-:105E1000F4E70A46E9DCCD23DE1B2E14EEABBC9A78
-:105E2000A51F786076F978E76DC1850E0C421AD50A
-:105E30001BA5F3BD96BC36AF540475F07C515D854F
-:105E400025EFAFADB2E45DDA4996F61F975E5FF2DB
-:105E50006A16FEBEC036AF26FB3C0BECD7B3C2A918
-:105E6000BFC1EC84B06CD8A5EBE9DEF27EC431EAA8
-:105E7000C98159748F17AA8D7B0A40712C1E3D4A27
-:105E80007CEA65FA9AECE34AABBD2A07ADF66AA84C
-:105E9000259136FAC5F86DCF0A85C61D5DAFFC9019
-:105EA000F6E0DD73A19769DF3E1555DE379E09F3F5
-:105EB0007611F3FD7C7B2A8B7333BA9B1FCE7FAEAA
-:105EC0006A1F2774E1F8716CF6FAE097F5374D72A6
-:105ED00098BB9D0C6F9ADEDDD886B49F90C17F740D
-:105EE000FB62F27FB881D9D30CCF1DA18B21C6E60E
-:105EF000D98D5518FD9298323EEF0ECDD6284E5FC3
-:105F0000E77475A85C4E6EF2E916BBCCE9E77262E5
-:105F1000D4CB47FF9B9C10CFB6AEBDEAE3FBE503B5
-:105F2000DF8CFF09F799891741C7F3DFC1D683F4E6
-:105F30000E665DFA2C27FA4FF6F92652BDBADD51EE
-:105F4000E7E9A67EEA80BF07CEFE9C66BFAAE127EE
-:105F500086432AC50DEF4CF3B8E19DE93F3F751824
-:105F6000F3CF38E8DDD19D7BC7B7B306859D65D4F7
-:105F70001B7C86EF5B0765F0958E67EF88FB71B33E
-:105F8000D2B6B844199C48FF03B7E84EB47B065B11
-:105F90005509D7FFD9629E75E9A813D7B17CF3DA0A
-:105FA00063A3AF314FBC9F88F3ECF4F3FB829D1ADF
-:105FB0009B2FF1357F4F3B17BCA3FB7F2D3B3E94BE
-:105FC000007FB74371C5B46CF3CE778FF168E1EB16
-:105FD000B2C1D7EDE7FB73C37F900F1E25E8B0E891
-:105FE000096F9D26E182128081A6696142E38BB828
-:105FF0001F2255C1583DB06FAEB404E3C617FBA3D2
-:106000005208F39F95A63038B50A27DBE3307BA909
-:10601000F6C5F4AF713E2D3EBA97D151FB01C517BD
-:10602000947C556EC375AA173B27BBA8BABB81C128
-:10603000D781FF642ABCBCBFFC4CB43B64E07A80CF
-:1060400049982E4F44BB11F031979CFA80FD498747
-:10605000DD9976B9F064B73FDDB0687CFD24CEF9F8
-:1060600013EC3FD42F25B6F6C551AB7D1BB0DDA791
-:10607000380DF5777D01F7328E721C0DD6AB187A8C
-:10608000E0AA766829AC0F5A09DE07F2CE9701E341
-:106090001BB5E048C2A1E7C77B275BC2B85CA52C53
-:1060A000E73017FAB9FF2774451DC5E1EC8F302E94
-:1060B0009885F957B2EEE3ECF72D56D5DE4D7AB25E
-:1060C00083F113C69B246A1DB47FECAD7E4833CBAD
-:1060D000D3D7C53819FA832E1BFB64BCBF5AED8891
-:1060E0007A667E7CFADBF71BF9E8EF5B688DFB399B
-:1060F00052BAB4FA41C4B18C4FFFA31DC7A0DB58FC
-:10610000F9681374FB0AE993EED091DD935955BBFE
-:106110009EE8E6ADCE1EEFDEE997AC7A56A42ADB08
-:106120005F464CFB4BE771A7B4DC05E3D0654C7CC4
-:1061300015EFC7E9E77EB4D592378243ADCEE1577C
-:106140009E1630E018E6717C73F784F0DCB8BFFE71
-:10615000CD109E6FACF930FBF9E382008F0FD7A30F
-:10616000AF92FDBFA69EFB03F10FF5CE4DFC9F50F5
-:1061700095786B13BE6BB67A9FCF62FF18EB42AE79
-:106180007929154BE9BDC403AF49F4BEBA54B1E255
-:1061900044846B68EE127A87A4BBEE493A7FE98F9C
-:1061A0008C4F1723BEB45BDC571F1D3FC779E1DF5F
-:1061B000045DAA12CBC89E5C53FE228DB3BA6EFC5E
-:1061C000719236FADB53D50131F213DBCE73F70946
-:1061D000B9DDE717E712AEE6F3A686318E2A4EFE4A
-:1061E000B10935D121D4FB170662AFF859F99AB934
-:1061F0004BCA691FA15BD7C15B73CC2714E0FD1AA2
-:1062000076D281AAF8FFB9A50E7FAF62DAAC848995
-:106210001EFD39E2DA6B03C6B99787F639DD780FD0
-:1062200080C1D75F5E18FE0D3A9F06CFA9F8CE7ADF
-:10623000778EF85E23B5AFEFF9F06EC7C31AD7308B
-:10624000C53FAD91B2CF674180E37BCD2D697E9E86
-:1062500036F74D3A4FF3A75FA5B889FFA8DF4BE7A4
-:10626000697A809FFF04FCC3144F5A3487BF0F988C
-:106270004B8E527E5E5FD6ACF5401EB69E0FF98DFA
-:10628000F39EF1FB33E00475989FF38C954B5A7F96
-:10629000EEEBDFB687DE5181349D2774FFC2496F74
-:1062A000C11A7818235749FE3B316B241EB7BC2016
-:1062B000D0DA8DFE9135C6F9DA2CBE4F92EBD2744E
-:1062C000BEE60DE8167BC71F31DE492C6C9E45B833
-:1062D00016D573B580EB2AFAE111BECE5917933F5C
-:1062E00037175D6FF2C5EA03F5667F3EDF67FDABEA
-:1062F000F1E1DFFCBA252EDDCE8F6EF8B723DAC7C9
-:10630000E5F22B1F10F269BCA36BB45F1C50B2E323
-:10631000F7D797E4C3EFE2C0846CF83DCB4BFB8822
-:1063200075E39FEF6CB2E9EF4D469C8D78D797F5FA
-:10633000577E7E167BC258570F048CF77C9ABD3867
-:106340004E55A2D68B78DA965C44F96DB78E4F4FD6
-:1063500063FC2D42AF6F15EF9018E55B055FA66CEF
-:10636000FAF66521D75B857C6D53A35E8C5F82A7AF
-:10637000CEF24E67F80B33BE4057E2F15D2325E3C2
-:106380008DAFAFB4DAFD477ABF652060F5D7167AD6
-:106390006FF368F1921271352F07D224F7CE743162
-:1063A000C9537829903C85632369DC37550D3852F1
-:1063B0003AC5AF347BA733928696CA3AC5B2897B79
-:1063C000B0278AF51D9C2B1DB87F09897BE48C853D
-:1063D0002FA338983BADBF07B24D8D342A78AEDC81
-:1063E00049118E104E9A7EAF8240B2FE1E4868DF81
-:1063F0005BF47B2A2130D50B1F3DDEFF2BF0F1EE45
-:10640000CB1E353FCA231EB33E3E5E82E66C7AFF4A
-:1064100017C21E3BFE969D12C9E5357E78DDE4A7C6
-:106420004949232588DF2D2BDB25C467A2132227AA
-:1064300064D1636F047C865ED88DEF2EB82A397DD7
-:10644000BBFEEDE2E12798CADAB2A211B2ED3F98A5
-:106450005E782340EB13D70B5B572EE2E92127F13F
-:1064600049751252F83B2AF307626D2EA4FB52FEC7
-:106470002E75A8333E84F9F03510D159FF55E8D474
-:1064800067E356B7402A4A7C042F8726E2EFDDF007
-:10649000BFC9C38B87BECDEAEF99E3D6F07755E04D
-:1064A000062BBF545C63FD7D95EA4E2BBF4CB4F1C7
-:1064B0008BBD7D581F390BE19D9A7400EEEB82175E
-:1064C000DAFA83E11DF7E17C76FB2369066F75BF7D
-:1064D000B5DCDEBF0C317711A3CB23371FEAAD61EA
-:1064E000F5EF4E3696215EB6A9C0EF5B342B74BF34
-:1064F00035D73BC463F8D6B0FB0B7CB7D858F77AD6
-:10650000F649FCDD8B29DA6B61F46BBECC7FC72EBC
-:10651000F38EC567E81D8BE320C6ED478852DA2964
-:10652000EC53EDF4CA30FA3F93BFF669782F4B2B4A
-:10653000B3FACFE4D2267A1F6CD4EE2E6576372BD1
-:106540004F9658EDCBD38B389FCE2EE2F6A1E6E3E3
-:10655000FD801A2F37BFABB4B148B296FBE3E51705
-:1065600098CAE71789F767C5BBE30D450B7A502F2B
-:10657000699358FD2CFC79A618D7288760642FBE34
-:106580000772FBA58BEACDFB8B8D45FC5C473B5E20
-:106590008C5B991DAE64988F7B9B18776391F10E8D
-:1065A0005C9CBF03A7F1D4F87E5B6089F406FB7C9A
-:1065B000C0058D18A7D231C141EF43DE34D1880721
-:1065C0001B5F4F187418C5B7C6E3902A96F27B97E5
-:1065D000B9DA6D6EE2FE41FBF7989847E7D2C681C3
-:1065E0006A36FFE86E203E710721EBF90F93EF58F2
-:1065F0005136BBAAB389F671074AB2FF4EA1917614
-:10660000D8D67D59F813C7D41374D25F0A118B778B
-:1066100086B87FEE4089234AF7026B81DE3B3B5010
-:10662000CEFD75F6F6BDB6713CB0288AEB349EB34C
-:10663000623CA3520D293CC8F10607B4B08EF101AB
-:106640007BC94FA303C3272BEF8E00D9779D216E03
-:10665000C7C8A1810607AE1FD0A499EDB10AF17B8E
-:106660008B1E7FACA3C812479220FD7BC095223DB4
-:10667000D21176C0DD59FC886B8AB89DBB595FF496
-:106680007C380BFD3614E916FBB9E220B7BF73D591
-:10669000CFD4E3708DF263284EE73EA0737EBC300A
-:1066A00010BDBD689C382EC3EF78C51CA17041BFDA
-:1066B000E47FD83CAE7AC64531E9A71DDABAE7DBFC
-:1066C0000C4F4E714ECD56E53D4FB0F2AFE0BD27B9
-:1066D00096BF6ADF0C650A2B7FB9C2898B30FB6BD2
-:1066E0002EC271DF054713CAD3BBF062D1C926BAE7
-:1066F0003D5224ECD0A48BF4A6E18FFBEA80CBA220
-:1067000057AFDC64CD2F814513D14FB1E45617D973
-:106710002657D9D6FB6D62FE5742BC1BD7CF2E1130
-:106720003F7EED0F66282837579DAC859DA6FB560A
-:106730004F087ABCCDF84737C9D9D5FE9482FBB84B
-:10674000D7779E7CF16701FB497557E0FA59923D76
-:10675000FEEFCB492B9CF9E66187DB38BFCB058781
-:10676000BC5D8AA6B2C8D9B34556BF5087CADF47B9
-:106770008A76C8E0F93CC6DF01C94F625F80DEF36C
-:106780004E34C6299E2ED1EED63A82145F477174DC
-:106790002B18C1F03DA23F08FE33E2E900E2A7E278
-:1067A0003EED5A7558417FF47239DE843FA5669CF0
-:1067B000C3B85DB1E82406BF6B57437A1258EA2587
-:1067C0000BACF78C545550BD26C738FDBD27F4E4FB
-:1067D000D30FDCA3E0FAF3EEFDAF9D8B72B8EC7142
-:1067E00027E095BCF71E08409AF60F2905E5FBEA5D
-:1067F0009DCEAC7E36F2D4323C2EFB5E80F4E2D5E8
-:106800000FB9530B59FBAB1F7D7D2630797AAF7DD5
-:1068100064CF24C4DFFD123F1F4C0CCFC4F5E96ADE
-:1068200019FE3DDB3B64BE62CE5FEF3CE66B41FA96
-:1068300049DB87BE44FD0E5EE232BFC7EE28E6EBC1
-:106840000FABC7E3257748A913B2E80F633FF4CE37
-:106850000E89C3B7CB95C250E0ABB7DFA5C4181CF7
-:10686000CBB7BF4FFC72FAF71E2C423C2CDFE5B4CD
-:10687000EC2F977DEFC3EECF303A2F73C2C842940E
-:1068800063E721CAEF8FAA234E926B1E9F721DA948
-:106890000056EFE1DF9FF93FACFCED901330B4F50B
-:1068A000EDBDBF531EC77CCC1FC75F1459BECBCAFA
-:1068B000D7CBB7BFAE205C9A03462A3F8BE79C56E6
-:1068C0003BC95E1F6044413DB57CB0F77D27E3B70F
-:1068D000E53BDFFD15F2DD729B7CBC8DFF281F6B55
-:1068E0009F9F5C6CB3CFB797151487B2ECC1FD5B6B
-:1068F000D01FF1CE437FDC82F767AFF9E82F5BBE94
-:1069000081F1603FF66828DFCBEFFF451198F4FE78
-:1069100039C55CCEDEDB71DF7736B3F9BFF7AA9BF2
-:10692000B0F5DE13BF9F82FE9FF7BEFFB789E80F69
-:10693000BAE189338E43FEBAE111FE7B36B9E040FD
-:106940007E4D997F6F519C13E9BBC81803F891489D
-:106950006DF480811105D7B3BF4A30D257C2BE0F44
-:106960007EA8A07DB6270A23889FA776BEBEE766CD
-:10697000967F97D1C79D853E6CFE931CA49F99D8A6
-:10698000B0F4BA9D179CF7B93A4C5D11EC7E398C86
-:1069900090DE1C43D797185DEB3274B597EF8743B1
-:1069A0000A9E1B2C7F80D17126D293D171E6583A72
-:1069B000BE8BFF983B968ED714DBDF6FB866EB6615
-:1069C0002CDC5996D5DE35F659D73E72D1B8F69300
-:1069D000A117F2E179A9F093CC298EAE2C46397C2F
-:1069E000E8BBDFD91CE4745EC810F3DE83FBA7E0CC
-:1069F000A31C7F708D7C09F130F2845BC3F5FDEA46
-:106A0000277E49F2F6DE232F283AC5B54091740A55
-:106A1000CBC3E8DF8BC0F2D7493C73EDBD7F3FF3BA
-:106A200057ACFDB5F853AA1AD18FF27B98FC113DF3
-:106A300052E737E9A877531368DED7A5B85C5C97AF
-:106A40001ABA10E3F9EC787F44E817335DF17DA9B9
-:106A5000EB76BE7626F25F2E7A1AF3D770FEA7B2D7
-:106A6000F27BAD729B534E057DDFBBEB8082F6411E
-:106A7000FA714573307BF83DD78842EBE3F79DDA36
-:106A8000B6C858BA67F02FE28E8E701F3E586CF36E
-:106A90007F08FCE493F3FCF33A32BC6D29D62DFC5D
-:106AA00063E0EF9D43D9F5FFB3C5DCDEBE0EE24DDA
-:106AB0001553C7AE5F323427268533F0BE8371632A
-:106AC0000CDE77EE77D23B7DDD834F911EB7EB8BEB
-:106AD000EB72D8D1FB8CF1760DCD44BDF6CE938F01
-:106AE000115F5EF7C06B0AEE57F66C7F5819AECD9A
-:106AF000C801AE0FE6DF297BE77F0DCD44FDB53C35
-:106B000047FCDF5BA2FFE53FB2F6BFFC81F72DFD3E
-:106B10002F4B0C2AF43BAF79C6795B8E5E82F37DF6
-:106B20007BAF0B703FFCF6A0B3299B9DF3DF627D2A
-:106B300034F0D41D38E595623CF72AE5EF3276B69D
-:106B4000457F89BF379C78C125F6B7D157D09EE9DC
-:106B50002851E81E4267E062F2D71BFD0DD8F0A96C
-:106B600005B506DC0768F39BEBCCFB2A03FE92A875
-:106B7000C302FFFF03C228CF4D00800000000000C9
-:106B80001F8B080000000000000BD57C0B7C54D547
-:106B9000B5F73A73CE3C42269393D7E4693C4978E3
-:106BA0004AC02109101ED58120A6986A50AA5CEB24
-:106BB000D50121444832292A5AEB779990885EF012
-:106BC000B3B1D28296B60317AA95C40E1034B6811B
-:106BD0000E606950B4019F7851A3D68A15C8180574
-:106BE0006DAFD6BBD6DAE730332783D0EFFEBEEFEA
-:106BF000F7FBC2CFDF769FB3CF3E7BAFF55FCFBD54
-:106C0000CEDC91529DAD3901DA560268A30040F105
-:106C1000E4D4A600C8AED9D59089AD6A519324803A
-:106C2000AFE9EFF2680B100498086075D6820F9FE9
-:106C3000B7AA16D01CC07F5F03CFD3DE8FCFDF256E
-:106C4000A7B4AFA179ACCDBFA43EB428B0B58287BC
-:106C50008D562AE8FE259E354500EB93FFED71BA6F
-:106C60007F77C0AEDAB16D4D59F11BEAFF4A825A07
-:106C700019C7B5D2F3D806AC0E75AB8AD7D3607EF0
-:106C8000C8195D4FBE2AF17AC6E33AA8C53F1F4C2A
-:106C9000C2F78A25412B34008E80A4CC60805AE351
-:106CA000B97F577D25EAC4685F76F681AF14E00AA4
-:106CB000D969A1FDDF9F6309DA8BA8BD36154A8724
-:106CC000D2C168EF5B590BE151E7BEDF9EE558B0DA
-:106CD0000978DD010BCE1B901CC1ADB4102F68AA42
-:106CE0001B786DA0E17F484347CCBA718097F6A12D
-:106CF000E8F7ADB82DBA698700B749C4076C93218E
-:106D00000C500270A55A0C90059002FDFA2411A8AF
-:106D10001D07302FC5E7A57D660FF749342E0BBC44
-:106D2000DC5640AD44F72DC937E5FABE617F304FE0
-:106D300039D13F5AE72FBEE25756417F450165588A
-:106D400019AD63A3FA97B1380FDDCFA051015EC72B
-:106D500084AAEBC7B6111C68F131747E78D6CC0CCE
-:106D6000C28D31AED551785442BA78E52435A91098
-:106D7000FB0A5286F87D2C85E9F4A3E93833DEFF5F
-:106D8000F1B194CD32F2E36149E0294078225C41CF
-:106D9000F3E3840F17E2670D3D37B3F9378C170B18
-:106DA000D4B656E8947413FDC41FE28DF174B7E2B3
-:106DB00050ED1EA2AD5753681E1B04D748B45E1F8A
-:106DC000D3D301EDDC0E8310B74EE8E37605D1791D
-:106DD00022F1C1C3FD54E86F1F8ECFD5A8B50D2A8F
-:106DE000EEE7C7D5E912EDCF09AA4EDF825C9FF32B
-:106DF0001BE83B0BE9EB88D2D74EF44C1E4A4F07F9
-:106E0000A84C87340F78D64CE079218CFB78780633
-:106E1000046506910A2AE2255BDF6786CE67C20F0A
-:106E2000ED2F6BBED89FF97D39D0CEE3F220C46D33
-:106E300001F4719BEE502585D7734CE7EF7BF0751D
-:106E400072743D466B2704E3FCA70B70FE22A6B6C6
-:106E50004B72D3FE8DBF5AC6E11F2AF679AB709CE8
-:106E6000E2737AEDB895FF5D31934008D68B15201B
-:106E7000BE3AFB17D4800B877B6C101E4DB307788E
-:106E80007D49A345DFD02F766454D8583F3E673DF7
-:106E9000F6D1317ACE0A31E3681DF24DA944F78765
-:106EA000E8C294A174BFFB584BE67331F36E5153A3
-:106EB00032699F3019267F2D479F87CA7480DCA1D5
-:106EC000CF7FBE3290F99C354A8736C7BF312EBD81
-:106ED00008E0A4CBB04F38CE8CE21871C97A2EB03E
-:106EE000CAAEB666320E19A7772381ECD87E9E54BF
-:106EF00018E4FD43F3E46B510F5B1C5E49C2EB0DDC
-:106F0000AA2B48F469748666B39E30E98D19F3D4D0
-:106F1000701E8E1B68060FD175FDCE6B8E135D073C
-:106F2000DCA0D9D3042EBC93484F187A043419F945
-:106F3000BB5A9AE090B06DECFAE4A5DFE1F8A41E2C
-:106F40001964BC3F807BEEA37D2BDE346262323C51
-:106F50001827DFAD0E213FC63ECDF2FACFEE133932
-:106F6000CFF3331F64D2BF0FFE3B3D3F0829ED3402
-:106F70007E8382AFA6F97BADC1AD4887E50765C6C4
-:106F8000DBF24E2908C467454BA5FE5D2FC820F0F3
-:106F9000077CFFAE5F96301E6518FBA3E9F8BC7F47
-:106FA000A3D5831A13D2BCF1F62AA37A1868313814
-:106FB0008080F7480ED26B914EAFF5C90F6DA2F5E8
-:106FC0006C6811F629AB363D6EFCE74957DBEA7079
-:106FD0007E2D17D7359570D3337235F697E5CBAA4A
-:106FE0008C2A227B7E5EBC7D6CB7BE47F2A7E13F58
-:106FF000C2B7A1BFEA487F911E92EF65FB771AE9FD
-:107000002593BC80B07F4DA8AFC238DF920DE279E6
-:1070100063BEFA9E8757E7637B5B30FEFA3250A26D
-:107020007DB6B3AED1A407EE86611EBB3414FF4A11
-:107030001AE29F40E204A7E083D343FA65F015D932
-:107040006317A4607925BA931E91FB47AD9F8EF319
-:10705000F97BAD10D4885FE2FEE0463918288ACA71
-:10706000C760EF4EA6C7925CA407E2D39E134FFF02
-:10707000242D9EFEC9A3D3BF911F291E133DE51ADF
-:10708000A63FD21B68FED4CAE2F8E7757A8FC67FA6
-:1070900082DE5E5E675DB7048F4944E7070FE46BED
-:1070A00043E9DAD4FDB08DE4FF7C7435D3715C9A8A
-:1070B000AE47743A9E869EBD3A2A6B1D6E5625BC1D
-:1070C0000F456D9F41382D40B9259C98E5DAA09F6A
-:1070D0003553F5DA70DC45340EF797E7080961F4AB
-:1070E00080F232E165A1D0BBADAA97ED91A16F937B
-:1070F000CFEAEDF7E16B6C33E7563C4038BA5D4AB6
-:107100006967BFCA24B76BC7AD60FD55B00AF531DA
-:10711000DBD5783F2DB4D2E15984EB796A25781616
-:107120008D00D8B152E5D6ECBF19F2BE11FD37BBC8
-:10713000B0CF3CAF82F85DA392FEF1A8B4CE876CCD
-:10714000C0723A500AC1CDF8FE50F83337F9A30F98
-:107150009545AEAE457FC4BF186A43D86E4DB7B0F3
-:107160007E7D365DF877D5E9366ED7D45AC08BEF81
-:1071700039D52307255CDF29D57BF072D23B3D56FC
-:107180008DFD2B35F2D2F7F87EB9BA06E9996B6915
-:107190009F40EFC5F1D5419C77A0E77DD7AD317613
-:1071A000F954F72363C80F7AD402F5A104FE5063A3
-:1071B0009A78FFA9D1EFB971DBD0E888D800F174D3
-:1071C0007F7F732DF95B77256B7CDFD635239CCFD2
-:1071D000F899CBFEF17375C3186FBB4E4090E46E07
-:1071E000B67CD355E3B03FE555C56367A1F25EBDFC
-:1071F00060120F61BEAFFBB27C03D1CF8FF45CC5D0
-:1072000017DB5F267E3DFB670548EE2A9A9F7EDFEF
-:1072100087FB3C908368A80498E40D958771D4ACF3
-:107220009EB41924DFFE63C0F23AB14F89C32DC862
-:107230000DFBF349AFBC21DCC3C96F98EE43402678
-:10724000FF7F4A7FFCF569E7C1FB5A03EF2E7013FD
-:10725000DE1F5BD90DEF935DD4ED671E6E30113DDF
-:107260000D7C3F933CF39134F6274026DC7A94C49E
-:10727000E3FF9C2E310ED67D294B84CB81087856B6
-:1072800021BD0616E5F1BE073E23870CDB2FE5EA9C
-:1072900050027FEB89341B3FFFA84DE0FED13A67D7
-:1072A000B005F7B3AF6EE9C5FDF8BE333FF05DAC96
-:1072B0007E931F8CAAC552C9FC4A25BADF3EB74D42
-:1072C000623984F65CA29B79BC212786DC18F29295
-:1072D0005B37CC174CF09ED1FAFE66D68D966C8447
-:1072E000DB3D12101F4FADC2757D83FF188055F92D
-:1072F000B41E7FF7A736B2D78E1EC91B4C30BE37DF
-:10730000CD25F0BB2AD0320DE9B562213E4B72612A
-:107310006B2F4A347F00D6E5A37308BF49D3785D4D
-:10732000A71C700BC92528EDB964B74F75577D9B15
-:10733000F4FA632887E4373C6AF5F0BA038D28B382
-:107340004416723CB15F70356C5A1313471E499B4B
-:10735000F1761AAEE3ED3495E7CDF079245AB7E72C
-:10736000ABCF5D34FFC01776E65F1EC9708CDF7649
-:10737000264DD0E78174EF1B8C97FA4C56A61E9FC2
-:10738000CBB3A81CE0D26EA4770C2EA37C0BF073B9
-:10739000E9BE00AF27BD0F03278EBFBC1AF9CB7E15
-:1073A0005D394358026552543F57380AC2F9227E6C
-:1073B0000865237DD3EB7FCCFA3A09F530B9E2D0EA
-:1073C000171F17B146C6E749F6492FB4AAC2CF6ABC
-:1073D0004B137AAEED6125D88AEFDDA8F4278DC076
-:1073E000B6C8ABCD5434D2F7A53C6FCE1DC0F26DFC
-:1073F000710425D243C9253F4F3BEB774D03D8FE9F
-:1074000095CCF437F3695CBA4117DF574497F1BD67
-:10741000917DE4BE79922083F83A5B76F2BEA79C18
-:1074200014FAC7AC6FE4F02F1F257D33A0C74F09B6
-:10743000F4CDAD645F0D7D0372E97EC2CFB417F465
-:107440003053D733187D301D261FF2B53A13E89715
-:107450004AA84D45129F57BF98F988CEFED97E01A4
-:1074600012A3BC17E528E679B33EBA283D5E1F9DFE
-:1074700086E9D9576851BC94DDEDD96F8FC187A1DA
-:1074800087A27809B29C98DF2381E36C5F2D21FDF0
-:1074900071484E25BD3303F98EF33FAFCB49DA6710
-:1074A000C16F13FFD7F55C9944B8DED15BE520B11D
-:1074B000599E236B7F46FF59D93B2F003A5C48DF2A
-:1074C00019EFB58243738E267A58980EB28AFD98CA
-:1074D000F70FB64BD5A4179169A9F3C69D5B1F2C76
-:1074E000CFB1F17B76F416A7128E9C80F12DF2AF0E
-:1074F000A247623FC18C6B338E5BF105168E1B6B0E
-:10750000D99F90A5909E77888F4B8B0253D84EDDE4
-:10751000817138F9AD83BD68B7B0DD81769EFC948A
-:1075200056E76CDEB7B15F637D77A4CCCC86D2A181
-:10753000FB375AFF1732043362FA4AC44638F67FE3
-:10754000618BBB6ED0F35C7430E83995E829FD9F00
-:10755000D3F35BE91AE3C14CD7FFE9FE0B96574220
-:10756000A2BCC0FF2FFB9F06BEDFF58B78EBB51CDE
-:1075700077549F142CAF9697201D26913FEE89EAF1
-:107580000707FE237C8DEF6E677D5389FA86FCCC5E
-:10759000FC8610EB97C939225E32EB8D4B7BE03ACB
-:1075A000D28F53C2E8975E80FEF88CFE2797F3389F
-:1075B000C174CA43FD71FEB20EBC345E838C1A7C6A
-:1075C000CFF83EC543760FFA3212E605CC76C3F00B
-:1075D0004B0D7FD43CCEF0470D7BD2A4D3E170BAE3
-:1075E0002F44EF07550D90BCA15C851EF330EC35A0
-:1075F000F2178EA4D5EEE4FBA343018E038A41A5C6
-:10760000BC0ECA2BFB61150E67581E3F543E934DAE
-:10761000721842BA509E20E0B404474843D781EE26
-:107620007680FC3E7C80DF5F9F2EF2A50538869930
-:10763000D604ECFF178C071FD9DD82326C719F7F57
-:10764000D2ED4A9F3EDE6871DD07D329FFAB40C013
-:107650005EF6CFAF9796985F46F4F1FE91E67154CF
-:107660007B79FDF92A78C88FCF57429207DF9FDEDA
-:10767000A049679348869DC6F9F26B34B697F9C363
-:10768000B14FE3C9DF49C097F7D2ADBCDE4647FF33
-:10769000011BD2C15FD35CEDB244FD74BBD5E7CD15
-:1076A000A7FC51B7F0D781F27D9C3FF648B41F6527
-:1076B000A6A08F5F15F1951354D69B153A1F2B1C6E
-:1076C000359CDF219B689F3274DF92E6E5C179F338
-:1076D000400B4C89EA5523FEC16980DE63D6AB03BB
-:1076E000BB5FBF2880F2F8D6FFFA3405F0FE3B4AB4
-:1076F0002485E871FCDE9753BC488FB7EE15F1CBBB
-:10770000CD26FFC89621F8539751FB15D1F59695D4
-:107710005F4D8AD52F707716CBC56D419982E1B345
-:10772000F2B3EC8964CE3D1BFDC650465CDF90830E
-:10773000463B3427F2AB2FCB10F1D96D1D9B6C1457
-:1077400047D765F85233F0FDC775FFEF78570AE762
-:10775000038CF52CEC9860237ABFD36387302BC859
-:107760003EABE0B3F76A691225EFC59F799D07F636
-:10777000E4DB2C38DF62092222AF05077E86FD0F8D
-:10778000726458E319BA8FC56FA936CAB72F9E0124
-:107790009100CAD5C23BA4D577E1F8853E27797020
-:1077A00043F6B920101FE72FD1FD955B1FB09AE279
-:1077B000A4E603942F5B84F3503CBBB83DFEFE600F
-:1077C000EFED077E4676A0DBC67660C979E2A7F2C8
-:1077D0000C3DEF3209267F5D42FE4AE98F4AB573C0
-:1077E000EB25C35F39BE12083CF0D7950E6E4FAC47
-:1077F00054B9FD4AD7D7CBBAF71E605C2B7D93C82E
-:10780000CEEEE87D3FF9462D6A372EDBF4E9FE9F88
-:1078100061BF9CF65944FA326C253C5EAEDB8D2587
-:10782000BA1F52FE85D96EECFDC3EF28CEC6FD6FA0
-:10783000E588EBC2FC919B40F92C960E861D31D356
-:1078400063B0B724997072BD41173D1FFB3FA5CBB4
-:10785000B99E6B9411D709F487214F5FE979874569
-:107860005BE6AECEC3F7B7EEFEB0B05FE8A5D7C01B
-:107870001DC52B2A7AC6DB1280C81AC4A7AFE7073A
-:1078800007884E07086F95D4BF88EFE754217E51D3
-:107890006E97F47CF4268C67F9CAB1E4501BCEA134
-:1078A000F8D28C4333FECC783B65ED2F24FD60C6C7
-:1078B000D92909E627DA577D8638BF58A479675356
-:1078C000BC8B666DB5CAFB11FAEFB8D27EE0872497
-:1078D000B75B248E0F1B9FE97C9AF4D1D2DFFCC4E6
-:1078E00045FAE823A5DD4DEF6BD87A9FCB4B7A495B
-:1078F00009B8E8F98F82422F99DFB747A7A3712E05
-:1079000070D62E3D10597D0FD2E30CCA33C96F5388
-:10791000D7DF56DF437186D711A1B8F3B8D23F9BAA
-:10792000D671DB0267738B87E2DBF87D2F7DFC2746
-:107930006E8DF3C7817C9D7E1CAF366DB17AC238E7
-:107940006FD32BB2875EE38708EFCFFCBC3FF4BE5A
-:107950008DF4B76A8148C1B4A1F7918D36921B7F2F
-:10796000D7DA4F6417B5825F7EA273CC3943BDAEC0
-:1079700087CD387E2A23FE3C01E9C3F9D400AE8BC3
-:10798000F2471014FAB8F5D7EBC7BF8BEB3BB1E564
-:107990000597541A7BAEB08AE93618BAF5970ECB24
-:1079A000B9F17B4AC77BD46F09F2735AB7240E83AF
-:1079B0007A44DB600DBB286E6BD864F504F072432B
-:1079C000A70C0EB25F47EDEC3734747ECAF86C90AA
-:1079D000BC1169026FC325C5F811CB3A3F984DFA27
-:1079E0007659AE0C3528524B779E16E3BD1049C22E
-:1079F000F1CBB6BF3BFB87D447BC3B12F0AB2AB4FC
-:107A0000D726E4C6C4AFD0BBB3C91F6EFDF5E7CC23
-:107A10008F8FF648905D34F4F9FA4D1FD8C89E9CBC
-:107A200040C664A4097A91DDF087E405B6D444FC2D
-:107A30000B5FFDDB0ABECFF9BFF3F1F1213A6BCB4F
-:107A400062BC3FF55B5C47FD9B764F0DBDF7A9DB44
-:107A50005D8038F8506916B8FFF97D6EB2C3F5D66F
-:107A6000805BE5565CAFFFC59D8CC72587EF748BA7
-:107A7000F8C69B2BF245815CDAE7E28DDFE57DD627
-:107A8000818FF158FF73B996F234A715A8DE9E4096
-:107A90006E26654AFAF9DAF7C7DF23CE0380E2F3F0
-:107AA0000FF5BC69E088CC7E9B1DAE4D9D1B937F7E
-:107AB0004ACA14F63800C1B7E95CD58FE695CF41C4
-:107AC0000E9F9E4DF3DC51A434D33911EE3FA0D369
-:107AD0004BFA9AF302A029317E56D5E12BB2292F19
-:107AE000668741DBBF56B05FAD91DF13F31CD3ED6A
-:107AF000C3CDF661D2A5D8BA13E74D17EBFBC0BFD3
-:107B000023108327FF131F329E00ED776A8EE83F14
-:107B100046F2B8D0D99C8A74FBEC95F76D74AE151B
-:107B2000C0FD8CA0F5F67DC07DF0646934DE98DF81
-:107B3000DF6D8F9E07925C6FF9C024D7F1F7D17E7D
-:107B4000333DFD90AA51DCF6A12D329BEC7900DF8C
-:107B50004BF50575EBEC71E78D51BC98CE1775F9B7
-:107B600034F29C4B4CFE98D19AF5C284CC78BB067B
-:107B70001BB3129E2F9AE390066BF057449F86A387
-:107B8000768E5F1A3A85FCA1431D1981F2F071C708
-:107B9000FED76EC47D7C1CB266D6F0DBE2F56DFDCF
-:107BA0000E945F1C2F23BD9358DF7ECEFE94618F11
-:107BB0003E76E2C57109E416AF27945B27B03EFB21
-:107BC0007FA567979C43CF7E2F73889F908AAF8154
-:107BD000BF3EB9EC62F22FCCF435F4AB596F9ECEB8
-:107BE000D012EA4DD0EDBC41C7A5DB4E326ECFE4DA
-:107BF0008AF3A6A62D7F633B86648DD811B74DC14D
-:107C00004FB87F1FD931EEEF9D278D4FB4EF787AB3
-:107C10009AEF5F4CBC65B989DC4C74962D2E8FC8E9
-:107C2000CFA97C9EDF4A7693F4B4A602F111664296
-:107C300088FC0EA9E78F7FA3F799E38AC04C18DD73
-:107C4000CCE7BAB036B63E27A4E8F51481C4F539BE
-:107C5000ADB6E8792EDD3FD779EE715DCE3D4E951C
-:107C6000CB11AC999A9CA8AEC45365491847ACCFC8
-:107C7000147ED608DA33B67FCAD4C4B9BA5CAB274F
-:107C80001A45BC443954D67F692E3E0FB6EAF51921
-:107C900038730E9F1F245B3E4592C0CE7573E72854
-:107CA000941F2EB7DC5E82FDE7D72D9AA3207E3C81
-:107CB000D32C3B8BB17F68DD6271FF524BB915A1AC
-:107CC000FF78A06ECE2CCA1B58DEFD29ED4F59A5BA
-:107CD00000D58F94B47DC0FD3BACE2FCAAE9D95D30
-:107CE000F5F4FE26091981F46F73859AB98E210780
-:107CF000D455943CD676FAE8FEEA5C8CE7911FFBFB
-:107D0000527DDB33C9AE38C22EAD98E24AEFFAEFAE
-:107D1000E17DE588956242DCA7C8838FDD392D8738
-:107D2000F4EEFF85F7EFCD9C78EEF79FD871D57C08
-:107D30001A3F560655C6F9CA14AD8AFA768CAF2991
-:107D40006E33F850A608BA973A6D1CCFB5A5797373
-:107D5000084F7FCA34F875616DAB55F8A572B2C093
-:107D6000819C6A69DE8EED6B3AFF5FD7E9417F94B3
-:107D70001718D89DBD99EB56205248FC95E5CD9D2E
-:107D8000448F488B029B29FFBAFBF14EC2E7EB36CA
-:107D900007E78F6E487DD07A092EB9CC51783B81A8
-:107DA000FF4DA9E34E6A7F9FE57B2F53D4878569FA
-:107DB000DE1B6F96C5BCCEE614B29FE045B91279C2
-:107DC0001AF6DFC18772456BDE8772358154417CBC
-:107DD0009D93791D726A07AFE306BB58C7FC6071BB
-:107DE0006B3FAE63823D7811C557F8FE41C2C18D2D
-:107DF000E86E119E0305D04B7C7BFD964B3789FDC9
-:107E000015B0BCB2FCF3F9FB89A7683E3FCE4FE743
-:107E1000A87EA99FFB3B15871A50857E5F1093773C
-:107E20007B16DA5F2E15F9FD568A3BA6E971B191F2
-:107E30007F33EA0D26F7FAAA9CA4B0E51E99F4CA8E
-:107E400069F4D7488F99F36E534CFA775AF7C7AC59
-:107E500097CF771E9892A5FBBD799047FB08D17903
-:107E60002039BCBA9DF4D0796002F98F390FCCCAA1
-:107E7000BA80F3C03B33455CA1519D1CEE631027D3
-:107E800026BE0D1E5A0865155C8FD00C69E7B6AB8F
-:107E90005D26FD6FE07CDC2BEAADA4CFC6BD02B74A
-:107EA000D07EAFD0CF4F068F03D7034EE877707DDB
-:107EB000A0B5D71A0C4A31F528472D5C8F32089EA1
-:107EC00020D7AF04EC6A80F5E578AE3F693BAA9F06
-:107ED000F7EAF50CE58264FF743D84B9FE61AAAB54
-:107EE000525E50C1E73320550EAD7F982ADF2493B0
-:107EF0005E8143829F67EB20E45299F6753A0C400D
-:107F000021DAA45762F88DFF4DCE0CC85CFE742CAC
-:107F1000FEFA54132ECCFCFF4E966E8F75FE9FB367
-:107F20008EE42391579B00E3B98EC46AAE2379C3D4
-:107F3000C2059BD13A92F220C9DBA41691373E5F6D
-:107F40001D8FB94EC75C8793EB8BA7537EFD2571C0
-:107F5000F72F6A2E8BEB5F7CF7D4B8F1456850633E
-:107F6000FB250FCC891B3FA2FDDAB8FEA80D37C652
-:107F70008D1F135C18777FEC134B13D6BD1838197F
-:107F8000175A1E777F7DF253EF13BEDA726595FCA8
-:107F9000F94BBBEF31D5C54C675C4C35F2F03AFF7D
-:107FA0008DBA3A2A03233A4F44FE3F56447ED3BD4E
-:107FB00055923614079E7080EDF83F8B83874C38BE
-:107FC00030E4FF7CF99B75BADF2327154AE4E77894
-:107FD000D1AF4A9A4675C4E2DC1EDE12F52A9F270D
-:107FE000FD83FD224D7279E0327AAB2A911F7457DE
-:107FF00095C67ED05DC30AF752FEA0FFFB2E8F947C
-:1080000037B42ED45C079AEEF04E012EA115759070
-:108010006DA8E8B95E77A683FD8C872C965B6A63B2
-:10802000D6DF9125F44F4796B05B3FB385B6931EDC
-:10803000501CA0B6E48AE7A9F801A8B207F9E2CA81
-:1080400000511F0647D7CC9A4EF6B37FB49646F53B
-:10805000B3D8BF082F2B41B62737B62A1CE7AD4A45
-:108060007E8AED499922ECC90459D80DB423BFCDBD
-:108070009A4876ED5EABF0B30256E24FBE0302AE15
-:1080800032B6AF7C4E9C0699D2F252AA4F3D6BB7E6
-:10809000B4AF114CFB974EB3109D0617C97C1EFC64
-:1080A000122D09D73B583F86EB9C07CFD6FF69A915
-:1080B000145F0F2E7AE4E49D1551B93C6A4B1CE71E
-:1080C0009D2FEF56BFE991143A47393A1AE2EA3345
-:1080D0008E6509BFF158962CEA13821FB8894C03AC
-:1080E0008BFF6B242DDA2FF5AD76E290FB377CBF4A
-:1080F00096F862EB9A1BA0BCA691C73F1B07F6CC73
-:10810000E0FA6D235EBAE17591D7BBE1BFE2F3D629
-:1081100027B3AC7CFF24BD8FFC9A5EDF44E2DB35E5
-:1081200024109C57F64D24FFA056058DECFE7CDFF5
-:10813000823B0F617FEE8312FBFB749FC65F5B8007
-:10814000F606EFBF0C9E5777E1FAFE9E25D6330F59
-:108150006AADB4CED76E6E4C213CBD9E26C6472478
-:10816000D036C7CC778D3EDFEB372FDB45713ABD7C
-:108170008FDE4FEBA1F7CF55A198FAAF81EFE4ABBB
-:108180004543DF7B1D78AD7ABD9795EC6409043BD0
-:108190009F26BD7AD0E25903DC8633D82ED9D92E5A
-:1081A0000DB4449E5A81EB7C67E9DF764948D7B726
-:1081B00017447EF5345EFF970D3268888B4FD37D70
-:1081C000567756944E47177D9A42F4447F65EB4F9D
-:1081D00049EEB6D93D54D7F1E6D26D2363FDFA548A
-:1081E000F78C616EF2AB2A2FEC3CADEAC9298CBF4B
-:1081F000E55B05FE96FF7A5436E16C79CA59DC8955
-:10820000FED6123E279D2441C2F878CF4AF1DDC246
-:108210000EC4998638DBF385A82BDF7928BD9CD660
-:10822000A780EFE2D8FDEC7CE9C6B15CCFFB46E667
-:1082300005AD93643680FAF7065695002FEA723240
-:10824000BF27A35CF727C7D2FC37FEEED727FF93E3
-:10825000E8B27BDBD61FB28C5C181D86D6D1AADBB8
-:10826000583F197118D5BD529CB6DFC276F20AF993
-:108270005E8EC3A84E83E3AE61853C1E158E6A15E3
-:10828000FA4D7C27817E70AB87EB3D595EEF5685BA
-:10829000DF62C449B2C593A3888F0C5E98C6F317FA
-:1082A00003E5C75C145819FA0AFD08976CD1F51557
-:1082B000781D189F8ED5F559B57BC2556DE2BC2649
-:1082C000CEFFC47E554702BFB316FFB1DFB9D1D789
-:1082D0009AC47669A35C4A7E87D711263B6EF63B2B
-:1082E000A7C1839C0718E27F3EF7D70BF23FFFD56B
-:1082F0001DEF7F5EA8DDA9776BE2BC77B4D073A1D8
-:10830000F0308E73F0AF9CE46B64B6B04B7D1463B9
-:10831000519D9F746AB403E5B3C15DBEF6019449F3
-:10832000C770411FEAB7E2FF97689FEEFF9AFCC053
-:108330003E85F937F8DC25DFF81D4905CA2119FB10
-:10834000F081A95CEF3CD02BE4A3335DFBD3348AEE
-:1083500033D0CFDC8C4B4C52FA6D6909F6F334E91B
-:108360005F9207B7B0478E6E712EEAD0BC40FA25F7
-:1083700049552750606E8CAF730BFBD578E0CD422A
-:108380001BF2E7A4E5908BCE571A76ED70E176E10B
-:10839000BE0CDFFD84EF65478F4C52B9CE6D532183
-:1083A000C5DFA1F09199EC9F552369279C7B3FFE87
-:1083B0000DE5F41102346DC8E0760CE555F0923FFE
-:1083C0002CF679AABB353D517EC0FFFBB7F6D17EB6
-:1083D000B7BD98C47ECBB6AC3E9683C05C80AD483A
-:1083E000EF27BF18CBF32127781D97D46A12D9FB4A
-:1083F0005FEAFBD9A6C797A7BE90799C31EFB8EE8C
-:1084000019B28AB82A0DB7EFE33AAE1EBB46FC4D4F
-:10841000DA02823E3D495C17E6DF73A5883BD3C490
-:108420007974E7B0C8DBF49EC86EBB4675AA496A8A
-:108430003BA4E3FC9D366167C720F07738A3D78D56
-:10844000F725F5ACE78F2010175C8F97A4B4C3B75E
-:108450009CB1F44FE1F586DD02579DC3C21627D9C2
-:10846000098C9536F3BAA2EB047EAFB1CE31EC178E
-:1084700077DA227FA17C3BAE4B255C8C01B14EE8C4
-:1084800019A591BF92A48A73F52455F304A4A1EB16
-:10849000F28F87203A07F0D02A382BE75C47382C38
-:1084A000DA77A02C7416EB7E4C60F1DA5905317D39
-:1084B000526495D1E75F75D7AF6D2BA07D093BA8BE
-:1084C00028213E1F77CD0795CEBF93142FC749496A
-:1084D000F3406B417E253BBC7CDF8D73B44CE17E69
-:1084E00098D6AFD27DCACBA4AAC97370DDA95FA606
-:1084F000F2734D7D56AE3B6FF8C775A9A5B8BF1393
-:10850000967D2B3AB0FD784168249DD356A6FADEBD
-:1085100021BC3E736CE1DA7138FEAF9D564F0DE918
-:10852000A5FEC08FE9DC7EE993568DECE2FD6F0C71
-:1085300086BF26FE3E2BB15E1CB08AFBD8D75AF010
-:108540007E53CF87363AD7BAB2FB5D1BE5BFEFC982
-:10855000F61D27FB56D9DD5245749B02EDAD94E71D
-:10856000447DC8F512A11CA12F065F19B9B9258653
-:10857000CEAE6CFDDC2BE2BB98E4A64797CF3DE482
-:108580001F61BB4BF7D376EDFD97122DE6FC34004F
-:10859000FB381FB80A9EE3BA4EE3FA4050A9261CE6
-:1085A0008D7DCD718B3706678E6C5DDEF5F7FD3CFA
-:1085B000DBF70F96DBBDEFD95CB87FFF9F43856487
-:1085C000AF42E8CF7D531DA9DF242F67EB8E8E03CA
-:1085D000EB916DAF75B3FFBDED1E358DE41ED70F6A
-:1085E000A9D8DF85FE05C9D1AE2221772DAF9E190E
-:1085F0004FF9E233BB975D4CF48AB8AD06BE670E07
-:108600002339DA0EACC70C392C2539C4A597AA2218
-:10861000DF534AF826B9B3F5CD61B9DB6501923B6A
-:10862000C437E31DF1AD921F52AA22DEF9F9512C95
-:10863000C79D7D472EE17A7624EF8809D4B730BEF6
-:108640003AC37382123E5F610DEFA3E72BF0FD2D5D
-:108650005A542E2BA4F8BA9E3AB7A89335F4E3EDFA
-:108660006EA1EF43A3B5540F8E4F96E538FCC7D8E3
-:1086700049D1D7EDE80FD6FF74ED3A9487126FB960
-:108680006512F93B2FCA6C07F6E87EF2F23F4CBD4B
-:10869000A6435C67FB19D671B14FF79B9F5B99C3EB
-:1086A0007DB20B1AF26522B6DE72AAF76EAEA25444
-:1086B0005C6575FB7E6AA7D686AAE8B870FAFCBE30
-:1086C000FDE21B37EF58C25BD7BE6F8FE53AE9A3D7
-:1086D00076A0EF38BBFE1E79FB49DCFF8A3D486F70
-:1086E00048E89730DED06233FECE859301A9FFEAD9
-:1086F00069A897AF59FFF8550A1AF4260202EEBF8F
-:1087000066FDD6B5E8BAC0ABD9DE6BB291DF5FE5E6
-:10871000F8AEC946BA0D1CFEBB9BECC9AE57DE7362
-:10872000911DEEB279C712AEBA8A318E4880C7E980
-:10873000D9A26EA7E21CF526CBB3C5F9D6C800AC0A
-:1087400025BC3475C96A90ECB4B7EF6AB21B7F419F
-:1087500052525EBB6E46C045F152FDAEFD5CA76F46
-:10876000C4D38B41FF936F9A4DF43F9D23E2E3BA4C
-:1087700075D6B8F87614846D748EECF7399BC3C83F
-:10878000927A93DF715BF726FE6E64E996F8E71A3A
-:10879000C84F4108359C273E5E9EADFB29255042BF
-:1087A0007E0AE286F324915765CF66E0FAAA5EAAB4
-:1087B000AFDA6611744A76405B6A7AD45F1993EB3C
-:1087C0005D4272BE44C767A75EAF14E994F87B8A26
-:1087D000314F887879EA716D137F2715F0729D5EAD
-:1087E0003D2D00D73D5509F0FEA7E6944000F75F08
-:1087F00089EA99E4A5AE470A323DF5EF5E14FC27FD
-:10880000F2451B65FECE6FA3041945346F84E9B3AE
-:1088100054CF1F2E7B22FEFCA261C3E103E42A3564
-:10882000864CE7413A7DCCE73B3BE87F129CEFACBE
-:10883000CFD6F308855018F75D5EEF857D97F7B1C9
-:10884000FEBDEA117D7E63DC2E5D6F36E9FB6E08AE
-:10885000CA62DFC80AAA8FBE5587891F3C4CA7464B
-:10886000C409E1001E14FC36EA199742AD8DEAC82E
-:108870001ABB5A0ED0F95B9DEED79AF18404657A43
-:108880002DD1EB86EA37C6DF5FAAD365A9892E4DC5
-:108890003EC9B43EE1775FE8FA50735D4F3858DA6D
-:1088A00061E57AEED37013D75F35766DE2F5D4E9E2
-:1088B000FC1BBADE00EF6709EE87E4E942D76BE6FE
-:1088C000DF9F0C9C5F0297C4F1AF3AE382F8570236
-:1088D000EA32DADF60AF886B077B8B392F61E0C546
-:1088E000FCFC6CDD8FBE7283F0374F765725933FCB
-:1088F000307048F14888FBF2173F73D1F73765BBFA
-:1089000065A073D2819EF2B501D4973B7B875FA7A8
-:10891000A11D287B5161BB51FE625930A988FA65BF
-:10892000C9255C67A265501C80F3B01D1E3834FC5D
-:10893000E552F6D367555088DA72A82C99FC859DCC
-:1089400020F21BD28B1519FD3176E5C36C91DF58EF
-:108950009DF3FE43A4A7AEDC6EE57CF095D6C84B34
-:108960001487EDEC553C2DD86F7871E1AA24E2F71D
-:10897000AF250FB9DD07FA9667D2794D638F55B5EC
-:10898000F37AEFDC47F7031D9267048EF7EFBE62C0
-:108990006C27E58936957B88BCC6FBCAD2B447A84C
-:1089A000DE157293396EBFF2222BDBD71379C9FF24
-:1089B0005183FB5AEADD349BF4F089DFEEE4BA8A96
-:1089C000814E097224CA23EF7F8AEA7D4E3C7DD80E
-:1089D00046E7C1555D87B96EE35CF6E0641071C788
-:1089E000717BBB8DE29BC64D46BF9FBF47A9D5FD9E
-:1089F000A8A62DEF727F29C50184C78D7250C3FFD1
-:108A0000DDBFFB193E1F6EEA10751F67EF6F91F80F
-:108A1000BE81F785BADE5A061AE37D998177BD3E9D
-:108A2000CAC0FB69A8E13AAD651D0F33BE17EBF86C
-:108A300036D74D0134DB4A3385BC52BECDFCFDDF59
-:108A40006D3ABE6F3B0FBEC7E6E8F81E036308DF52
-:108A50006766887ABA33878725D3FC670E72F6F586
-:108A60009B70CE76F790EE170C862D5EDBA5D1714C
-:108A7000A7BA3FE5EF10FD87066D547732BBE713C9
-:108A8000E6474DCFDE5944EFEF80AF81E8F79D9E7A
-:108A90006495FCE09A7EA1CFE6F4D8F97CE23B1025
-:108AA0006A233E0FEC79BC2D9D70F32B811B43CFC5
-:108AB0002DD1E97A55E9F76753FCBE54B78783BDDA
-:108AC000B7CF66BD33018AC8DF9BA37FE73D27A4EC
-:108AD000EBA18DF174A7736AE25B538F9DEB4DAEF2
-:108AE000827E1BD9B3AB74FB69B69303B9C9CCE7DB
-:108AF00000DAAB1138BEA1C35447A9F4F37A06BB20
-:108B00006D7CDED564B2BF97E508BFF27CF1BD99FC
-:108B10005F0B72747BA2F3AB2622EA18E6BC227BC1
-:108B2000E8FCA137BCAA94FC05836E667EF56A2535
-:108B3000A9DFF47B092FE97EBED1BF46FFFE2DA43D
-:108B4000B63B63E3F6833916FD9C33F8D372DCE75A
-:108B50001D12F4110E31BEB9A64C4A18DFDC938306
-:108B6000FAE38F05B73E382136BEF16E1A49FEDEB4
-:108B7000FDA857CA2BB87EA78FCF0B95F61A3A07D8
-:108B8000F377583D14D7F8BB65F607FC1DF6A00532
-:108B9000E7BD927084EBAAED91AE201C61DCB09A27
-:108BA000E69F4B29651C37B71BFD117C6EEEAC4F61
-:108BB000187F07878B7D0F2A5A76A238C2881F9AA2
-:108BC000BE10FEAA71BD09F5008D6FD2BF4BEBDA66
-:108BD000F7B7C2A2143AB7FDBC7001B64FE7083B25
-:108BE0006CF8AB11F4578B757F85EA2EEA04EBA085
-:108BF000EEB97B6CA4BF0ED00F5B50FDA4EA5B4DB9
-:108C0000F1B0EA83E61F91A321B5B11C35914C1157
-:108C10000E7749227FF3AC956A43A0E5C830AE0BCE
-:108C20003CF59A388732CBFBA9857DAC2FCE2C70D2
-:108C30003613DE96956E5A9D4EF2BDE775D63763B4
-:108C40007F6B532D6A745F2DF4DD1DC7696D71FE56
-:108C5000F2A9EE561BE7A163BF1B2E1EEA1F359E2D
-:108C6000278F75D0A45770FDECEF0E1C9455CA0BDE
-:108C7000211D7F91174B2FDD1FEADA97C4F66BE0B9
-:108C8000B033487EFF5F753C9ED0F3F22D9532D312
-:108C9000C33245B463F73C534CFC257EF850DF6F7C
-:108CA000DBF3CC255ECEA307451DF113F175D88DFE
-:108CB000A1F83A6B83AE7E9DAEB8AE91F4BDB2B171
-:108CC000AE5D4ABFCB93408E24691FF3CB22C5C74C
-:108CD000B9FE67E5DAD83A52DCCF2DA4F7FED3907F
-:108CE0001725E2263BFC4E8EC6EB6BE911FCB5EC7A
-:108CF000162DBEFF7A91AFB1F2FB87DC9F1968A0F9
-:108D0000FB678A92B9BE01BE08D4507F45B1F8FD19
-:108D1000801547968E8ACDD38124E271BF35C2F586
-:108D20007EFEC3165E9FFFF0A07BB893F4E2A659C7
-:108D300054477B95AE2F0E1427D713CE03F4DEECE9
-:108D4000E83C4B72C47903D07E73A2DF571AFB5DF7
-:108D500005D7321D56E9B87A4B8F73308EFA222729
-:108D6000411C752EFFF7ECBA75FFE9CC0CEDE5EF71
-:108D7000210ECA0E2A018AD777BE911424FBDFB2D6
-:108D80007BC93B140FFBDFB403F9212BF62C19C56B
-:108D900075F83EDFA5A44FCEECB9ED52AE6394C496
-:108DA000F7A5015A5F0EF953AFBAC94F6ADCFD2A25
-:108DB000D73936EE9AF808F94FE82F5D45D7D18FAD
-:108DC00061FC95BD58C1F8DB79A822A384160E9EDC
-:108DD000649AB7F1A0C2758F8D072B5EA821BFE6FC
-:108DE000C599EC3F19FE5239C5E3E43F1D1C1EE74F
-:108DF0003FA5E60AFA0DEC4DE2FC8704C5023F30C0
-:108E00003C0E3F0D5D7F603FA301F55D2C8E8CE72E
-:108E10004A72159E6754AE8E9F90E4657C6C176D08
-:108E200043F74EDEDF326B88F9DDD26115F73B4543
-:108E30006BD44907203D40F478812E211FE6D8826B
-:108E400005146F3E5F14FFFB4446DB912BF209CF04
-:108E50001F15DF193F3FC3372AD1F7C6019829E212
-:108E60007049A77797B53AD1F7BC4FEAF3B93220EA
-:108E7000EE5CD2687F922BF4EA1C9BC85399EF2FCB
-:108E8000CC35EC0FACA5F398976BACAAF1FB2DB9E0
-:108E9000A877AF06E3CFF3EABC4C3AE7127135404E
-:108EA000FF2CD287DFA53C3FF95F95C2AE1B79FE50
-:108EB000B91BE13E91E7BFC94A7AC1A82F99EB35AA
-:108EC000FB5FB557D03CD7A27DA779AEAB8EBFFF75
-:108ED000DDF3F85D37E6EA767C248C1471853399EE
-:108EE000ECC1E95EAB2AF33E82C3137D5F68E89F65
-:108EF000032BC5F9512FEA456A5BC6BCCE79ABE7B7
-:108F0000F71E7D2A8DF56A121423892FFFF21D7733
-:108F1000A2795ACECAEBBC38FC19FC3A497140E937
-:108F2000507EDDA9D3BDD171C2C6E79BD0FC804580
-:108F30003EF777492D633E6F23793AA97FF782EB9D
-:108F40002BB4C7E8FD93B99FF0FD15332112C0FB88
-:108F50007BC7D8D9FE35CE92F8FCA0312CEC61E36A
-:108F60003C610F4776CD65BE5C8F7CF17A584DBC75
-:108F70004675B906BF2FFF726096114FD2394E0B5E
-:108F8000E19CF57426B78D5DEFB6F17925DA5DF2D7
-:108F90000BAFA98CE7DB28F0DD9785F76FA8963C2F
-:108FA000684186F0FD869BE632DFAFD3BF8F391F65
-:108FB000DFB7E7FA36E492DCF70D5E3F0E49F4FCCA
-:108FC000980F0BC9BE369D03D75B0C5C0F8F3C4DD1
-:108FD000E7659EB3E7E9FF783AF63C7DB8DBF71F1B
-:108FE000B9A4572D5FBA2E019AAFFF17CB25E21314
-:108FF000F0F3E792AB2775B97A325715F9DD4C716A
-:109000003E3456EF3F6F0D16F0F714A517760ED8C5
-:10901000F2EC1FC7939E3BB5F7E0785B0C5F4F2CDB
-:1090200047FD40F666F77EFEFE308A3B8B8E3B8521
-:109030005B49BA56B7A3F1383C413824FDBC7DFFEB
-:10904000D5143F9EECBA2E53D262ECECAE975D2362
-:1090500062E63DA9FF2E06C66D23BF9B12BBCEFB69
-:10906000C4797948CC87F23FF2BA71B1F75B753CAD
-:10907000F7339EEF1FDDCCE7F4069E151078367EA1
-:109080000FE3EC779536E0EF1E037BEC5C5F31601D
-:109090008D14A6C5C8CBC73A9D314E930B32999417
-:1090A0005CEF3A19D655F1390106EF6BA7D0E77797
-:1090B0002159D4873673DDE2F466F0106E25D8C8E6
-:1090C000FD49D5E2BC7C2AF4C9B4AECB20C2AD17B1
-:1090D0005485DA995461866DA52324933AE9ECDA34
-:1090E000974CF80ABB95B4BF3844E96922FE45F7AE
-:1090F000AFC05F0CBCE2607482127EA7EFCE137526
-:109100000E9E64218F9193E2774FBE05FDBCFE69F0
-:109110004A1FAF3745D3D2E9BC64FB73CB65AA7F46
-:10912000D9035A84E4CC93D1CCF9B7C80C086D4E5E
-:109130008BEEB792F6AB46FB53E78385F62B418760
-:10914000D87F33A4D3F9D81408F37B2EA705E37E88
-:109150006780A650DF9157A4D359C46F557AFC6637
-:109160007104B8EE27354FE03A5909CAB9159CDAAF
-:109170000E3D4CE73325629F93F13A9FE3348B75A4
-:109180009FB5D77942DF4D8510F319EA417D817F84
-:109190005C61964AF492C26E0BFD9ED885D275C072
-:1091A0000DBC7ED7AD91533FAC889E7B797AB2B926
-:1091B0001EFA41C91291695D8E02510F1D86107F02
-:1091C00097198EFFBDB392BC6B8BF268BF3EF11D49
-:1091D000AEB9AEF389E066AEBB991F40F2D03C0554
-:1091E00000C7DDD13A006B7190EF5BE99C5DE53A19
-:1091F000D3728A177F9FE52BCACBE27AD3113C99B1
-:10920000129C589B12C53BAE8C7F7F271952DA49BE
-:109210001FB5EAF5B401D5A5D73315F23E34D4F322
-:10922000FC23128AA8EBBEAB4AD49FDE356C0FD765
-:10923000F9F64BA04AF974FEBF87EB80E987E1ACF1
-:10924000F9DF70FE9FA9FFEE43B1EF8DC925BA92F9
-:10925000C7E75A8FA570FDAB32D3AB511DAFB95ED6
-:10926000BCA46DE203FD1C971AEB35D5892B1EBEFD
-:109270007F97AE5F5B1DE27780A45576559A4EDFEF
-:10928000BF2FE7DFB16A25D7A082BE7B5FCECF5369
-:109290001D33158146527DDF257A997F970AE13586
-:1092A000F83CCD9B3A92F37D89F831DDE087656823
-:1092B0009D14F2E166E2AF51776BD4DB122068DFD8
-:1092C000C95EF13B782AE2847FF70F9762275C7AC8
-:1092D000CDBFE721EA7FDB74FAE3BA9EE0BA4F879D
-:1092E000F84EDBF89ED74C3703BFFF0D047C0BCE46
-:1092F00060530000000000000000000000000000BB
-:109300001F8B080000000000000B9B29C3C0F0A3C6
-:109310001E8145A451F9E8F82C9A3C0B0303C34F76
-:10932000209EC7835F1F2E1CCD82607B8A3330183E
-:109330008932301803F14C209E05C43F80D8408C00
-:1093400081C110888B80EC6220F6016207A0DA2FC1
-:109350001C0C0C138419186603F1326154739F328C
-:109360004268252E06065320FEC784DDFEC96A0C1E
-:109370000CDB7510FC385D068635FAE4F965140FD0
-:109380003DBCCD1195BFC70A95FFDC8681C1DE09C2
-:10939000C1DF6B459AF9D540BD354EB8E58FB9A10F
-:1093A000F2F779A0F22DD1E41787416800E6955CC9
-:1093B000CAB8030000000000000000000000000028
-:1093C0001F8B080000000000000BED7D0D981C5560
-:1093D00095E8ADAEEAEAEAEEEA9E9A494FD293CC1E
-:1093E00040CDA443069884CAFF04265033C130AC54
-:1093F000A84D94ECA0A89D1F312ACB6B780A01C11F
-:10940000A9F9EF9924A4F3F342F89134D12CA0AE3A
-:109410000EC87323B2CF4E88BCE0DBA711D12F6AF0
-:10942000F01B621E4FD45D67D92F4BBB06F3EE399C
-:10943000F7D64C574DFF4D02ABDF7EAFF3E1F5544D
-:10944000DD9F73CE3DF7DC73CE3D7547264D247608
-:109450000D21E7E047CB3F780921CB264BABC3C8B2
-:1094600092A5B4FC0A31FAE8A3CBB56C8740CB05D2
-:10947000EA9847D009B9229226C443486CF431E2F5
-:10948000A1F552F532196924C4AFAFAD22EA64BF29
-:10949000EEB2AF9B90ECFCE2EFC523C3513D44FB21
-:1094A0007B6A799749FB493DDDDA65B64CBEAF83EF
-:1094B00041297E4D8462534BC840C35EE28910321D
-:1094C00044C79E4FFF53EE4B90386D27678789BE88
-:1094D00000EA55637DE5D9E39EF5F4F99097748D24
-:1094E000D2523964658314EF85CF6B8B454A8F5F09
-:1094F000323DBFA5B03FEAC95840477417F67B8696
-:10950000D20543BD5BF42C017A281D6D15D2D356CC
-:109510008C9EE72D0BE8B9E290BE289F1EA59ED138
-:10952000A3D4F7E23C9D89527A1A2F849E7B909EA9
-:10953000214ECF908B9EF7717AD6D9F4D40D223D6F
-:10954000830D941EFAC8779F45E2B4BE02F484A04E
-:109550009E939E41A0A7A5003DCA9F879E4F72790A
-:109560004B023DCBCAD393047A6A2BA0474D138D8F
-:109570003EF713C11C6D998A979FF371C1B3E9A897
-:1095800045FB1D7E5BC479A62B32BA76C164BD3122
-:109590008ED7F71A07A363205FF3F64609ED6FB87D
-:1095A00041C0FAEE7E1F2232D6AFAD377BA0FFCB93
-:1095B0009E74F63FDCC0F0B5EBFF139FC77F2222FD
-:1095C000B6AB51E3C3000FCFFB1649C038DE74546D
-:1095D00083768DACDDC0BCE55D636AA1F68C9EE14F
-:1095E000FB2D9467257B0FF2EB730D69A253D8FF17
-:1095F000648200FFE528C3C76E4FF122E44A20FBD6
-:109600002ED364F811329BCE937557D6A2E3C5D200
-:10961000B72B71CA8FE1BA5E05E84EE9BBBA406F5D
-:109620009D89C9446C04BC0AF3C1968B6BC836A5EE
-:1096300089CE67DF2BA23142A6D6B340B86A276134
-:1096400049F5906C33C1DF3902F42470FE07E6ED72
-:1096500045BA65A06B01D095243A7DFE1C971FDFAB
-:10966000B31601B952742B6A2D983A4E0AF8DF02EC
-:10967000BDA6A36BF3E8FFB93DBF745E5DF38B7CC1
-:10968000798898590BF8E277CE9B5DBEC4F97E4588
-:10969000BD85FC2D37FE54FAD9F87F4F74EC87282E
-:1096A000E9683C3489CFB077AC17E49AAE49E3203F
-:1096B000ADB2908ED39EC76FF77813744A69871C3A
-:1096C0007F8BF369D83F7E24BF3F373EDFE5F5BE91
-:1096D0004B342C6DBA161E62E394EBFFC7C0E25AFE
-:1096E000A8EF5A5792E5E0FBBDBCFE15CF3BEB154A
-:1096F000E3CFE727F86345411EEDF5083F732621C8
-:109700005C64F0A72E27E452F83FB4C9EFD78FDD91
-:10971000054BEB1791C419E8E73692B8383097AE8D
-:10972000176FE20928AF95CC7F83E7B495F6FAE589
-:109730005CEE44D4036C3CDA3DA1FD87787F92D087
-:10974000490895675F2BC98C50D4DE239ECC0A94C0
-:109750009FBB0831666979FBFA29B6AFAFD432AB4B
-:10976000613FBF4AA284D0F1AA88E68712EA6769FE
-:10977000BDF032D5A023111FF94855BC80DCF89705
-:1097800012CB5F45C76F951DEBC26F2608E8855069
-:109790009464FD614234211441FC5790150C7F5DA7
-:1097A00080FE6A24BD47A2E388318F71803EAD6A96
-:1097B000232B37E4C9A12E30F9ED89793C40D7201D
-:1097C000D5FF3EBA24C30D74BDC37A88527BA380F3
-:1097D000DC4EE8F79C48B23368BF39816497505833
-:1097E000252B13B45DDA47569EC6718971A0809C03
-:1097F000AD13D8BC0AB1F173E7D02E2099EBD02E6F
-:1098000048E33A96636913F601C50C1B3E98F6B31C
-:109810003B985E93880972521D4B67ABE0BD7E4951
-:1098200023E03B2B9624AFB5B0F2541EBE8A6A45A6
-:10983000D17E6ABC44E8CDDBC70E53F93995276F5A
-:10984000A9FB991D30D038C8F5CCA7507FDAEF3F7F
-:10985000C6F9248F5164802E5DCE340953E53A2534
-:1098600014D6131B39BDF0BB76B9535EA5995C5E67
-:10987000E9103E89A07C0D3D4532802FE5E491F54D
-:1098800014BEFCA84246A87CB590E31E909F856458
-:109890001C4B836822948B8981E55212C7F2F7ED45
-:1098A00054EE69799B49E5BD09E5FF2601F68986F5
-:1098B000C4FC307DEE8F5957C2FE42E57F1D3CA7A8
-:1098C0007222803CD598A4E07E592DB0F5BA53D2CF
-:1098D000FC506FA749503FEE11FA2CD82752DC4EAE
-:1098E0004AF989631D3FC0E94EF1B23A96206330D0
-:1098F000BF745E40AF1F6EBC15D7B14F62F0209DA4
-:109900001794BB556C1F73E3A1C0BC2C38FF79586A
-:10991000F7E79F87416159C179188279582730FD4F
-:1099200029FF9A8D5F823EDCA737F63C8EFC974F6D
-:109930004FAFBE4DFF7297DE5CC1F5DC5564FC2273
-:1099400089EA91DB7D59591210EF2F02DEFFF6B341
-:10995000E31F037AC858623EEC5314EFC704E46770
-:10996000921CA7E34BAF8819F0533CC11B944409E8
-:109970003F8568549F295C9F35C1FFD66BAF07A711
-:10998000EADF4B463F7902ED0DA22446403FAD4A47
-:109990002A20177DF56B1590A3A17A0A83DC446514
-:1099A00045B882962AE904F9B3ED8F17A21B14D0AB
-:1099B000CF723431C397B7FE574713E457B0CEB5D3
-:1099C0004454A474C899EB14A067405BABE4FB5704
-:1099D000B29A88CA54DE86A05F18C79B5404D493F9
-:1099E00064462FE5CBEAFA24F67338DA81F80C687E
-:1099F0001BB0BD4EE26837BD50BFA1B311F68B5707
-:109A00003612D063C5F8E1B6A37D6A92C879FB81AE
-:109A10004F4B12316F3E7D52320B7888D1C2FAF52E
-:109A20000497738F1EC77D85A41F34152ADF5E3E01
-:109A3000D7DE28F999B0306F3E2279FB0B9D8F411C
-:109A4000BFD15568FDD19DC2D9AF21106579E5FD23
-:109A50004EEEAB7C7ED32B526338BFA134CC6F1F4C
-:109A6000D5EFB87F9E0C650E52127A5625F7C37B50
-:109A7000AF2591DE0876D30CFBD9DDE26506C8D9A7
-:109A800003C037CAD86DDD0A9623DD1A96A9EE28E1
-:109A9000960F06BFF0C4186DB7C5F2693E5ACAE901
-:109AA000BBBF01FD51EF3A3E02FD4668FFD0AFA4B7
-:109AB00068073580D9FEE28DB1F2660FE3A3EA09AB
-:109AC00020BE8B3CCCDED68989F292D64AFBE35588
-:109AD000AD4E7B36640426E59EFE176CAE71C07EEB
-:109AE0007DB6A3BE7B5DFC80EA26C0C72BC589D1AD
-:109AF0000265617D7D5610114F515C340E768634BF
-:109B00004BC6FD7F4070EAE7473C6C5FCB7814ECB6
-:109B1000374AC65F3847F9E1D53C68DF84AB9B46DE
-:109B2000B3C09F5AD998478BB0774CAB29301E8968
-:109B300048BF1BCB5BCF4F0966A3E72F804F53E88D
-:109B4000EFE970C875CAC3F6B5B37CBD883EB30BE8
-:109B5000F449948A2141F9D01F073E78826D46333B
-:109B6000E5C340B5AC83DFD3DFE329B8BFB8F92044
-:109B700056DD12053DE8E6FBF35C8E9EE27CBFE617
-:109B8000EC07505F6CD73C9D19D41FC73B419FF732
-:109B90002FF57840CEFF62F8E7A2E3735C7ECE0A31
-:109BA000137420DFFA23CC3EDEA651F981F51C6147
-:109BB000F2A3936C27BE37285DC254BADCFC7BB796
-:109BC000E9B3F95E55ED89675A00BFF138E2D7264F
-:109BD00015C4EF3F8AEF365EEA045E598697F19727
-:109BE00081D7534262BF87C20F70797D401A5340BC
-:109BF0002F34423DD03B41B68EA6EA25C1DDCF933E
-:109C0000A02776403FB4FE0E69DCD18F5D2F047C27
-:109C100060EB22CED685F4675D17365E231C6F9D00
-:109C200064985C371796EB771B2F7B3FED0D5E4DED
-:109C300040DF54AB71B4B367A9F12CF0ABAF56D68B
-:109C4000C1FEA10E11EED7D854CFF3876AD745D104
-:109C50007E09AD43FB7BC01B477BFC58EDB7CCF5C1
-:109C600094AEBEB355C46750BB3F78F5311DF4E2E6
-:109C70003111FDB2BEB37367250BCC7310E26014D3
-:109C8000FF00E087F6B33C616C03BE7D2A557CB4CF
-:109C90009F375B4806F4A95735A3605FF72D508CBA
-:109CA0005EAC1527C0DFDEE0C75A132D53DB07D5A6
-:109CB000C13BC48593E3D09F700E6C5CBA8783BFB1
-:109CC0008EF4098EF705F128077B27610DFBA7B0FD
-:109CD000AE40D782796EEE24DF292DCD12EC9B2485
-:109CE00060C0FCC7E29DBD7F043EBD24A21E74F38C
-:109CF000E75931E113F3E25EDE4802E7CDEEEFFA19
-:109D00005A09F5A8544F323E01468DA31DD957EF8D
-:109D1000C1389AA4AEAD2A695FD757665F131EDFBC
-:109D2000B0E5A1FDD76CDC80C1F477888C11889FE9
-:109D3000541116BFA826BA40B0BD21C43128D2861E
-:109D4000719388FF9DEEF716EC5730779273C169D7
-:109D5000F42BD17EE7BE0BFD96C1D74F1EC57EA961
-:109D60007A889C9B31D9AF379AC487E4ECB973E207
-:109D700072C29AE02F81F22D790C5C9F6476D838FC
-:109D8000488B81C89D0EBFE946B1C9111F95B5C169
-:109D90003B84302DEB6F33C7F2F4837B7E6F82817F
-:109DA0009641BD4DE658057A03CCEE42F1A7413904
-:109DB00091E981FDFB2215E385444A62FC7748A8BE
-:109DC000590CF6B35D4FAA97B380976A9816E88B43
-:109DD000A1191E4334A0DF6DC7C11F20E20D46A2AA
-:109DE000441C49AA977E934FCFA745673CABAF8CE5
-:109DF000BC0F74973E87F0CA46A2903F73BFC8EC71
-:109E0000176FA0F0FBEBE58E7BC56553F9B69DF3AC
-:109E100077A89ABAD65730F1013990EA5F3C017CB5
-:109E200018A85D132D452FD1A89D93E7172D93CD2D
-:109E300021B1341E5BC5DA02F3A752E15959629C85
-:109E400009F94E120DFCC557983EA2F88685994C2B
-:109E50003FB39F01361BF1B6FAB4113A6F811683F6
-:109E60007C99C2D1D54A5C6AA5F42E3D4044785F06
-:109E700027121174ACD866A0BE6A66FE9D49FF0128
-:109E80001DE136D9B16F81FE9CD8B71A41FE9DF015
-:109E90001330CFC1BC79EE3E447E356F127FFAC8D5
-:109EA0002C1417F6CB1D7F57981F3515F163379586
-:109EB0001770C87752BF11CA1DD46F84723BF51B4F
-:109EC000A1DCDA4D859DCA537F7733C2FF0D9AAE70
-:109ED0008473B264AAB111E2A25F3EB1893EDA0D89
-:109EE00038CC866EFD1D10271F01F84A44C71200AA
-:109EF000E6E7292F89FFDE0E719711BF5DFF9FDB1B
-:109F0000B1FE042CF4425C7F24C4DA8F89C10EA810
-:109F1000BFBB81F0F8B9A9DC94E7FF9F11BD287F92
-:109F20006003B1F6BFED81FEFC920DD777401C7542
-:109F300002A67C047CFC0A8367F73774C0B906AAC2
-:109F4000003A5E53FF456CBC792C6E463EB4B60CAD
-:109F50001F7B71FC7570D806347FA8060E8F894C64
-:109F6000E5A6893EDA5DCDF1AEB01F2225D87EC7C9
-:109F7000E347C5D74D997D8DE3517E3D9868BF81FC
-:109F80001EB660DC9F14DEA7DFE971777BA7C717D9
-:109F9000A52D6142F7E1CED12C4CF52E31119668FA
-:109FA0003F55D71EC76D458E6699DD50E1F86F8825
-:109FB0001A8F7F26305E68F35BD298FDD1EE9A4F00
-:109FC0006FC4C47348BFCAD661A5782F8771F2FAEF
-:109FD000215F5B5C57687FB1CBC80D9E49BB8BFE90
-:109FE00057736DC0016B6D3593761CF063E96C0798
-:109FF000ACB6343960AF7699A3FDF9CED7E52E3AE9
-:10A00000749B7F1CAE75C195CB9FA4F3FDCE627689
-:10A01000E404CCF7E572F0D9F94E98F5EB231FAEC6
-:10A0200062760EB3673E4E781D371E469E1E16A101
-:10A030001E83758F406C3B37DB3CB5FF3EE50B184C
-:10A040008F33FB24E2BF7A6ABCCEEA4862BCCDEA19
-:10A05000F5697D118CBF61BC6D0B35E87DB4BCDD4D
-:10A060009BB855A2FC7ACB7F518684A1DFE40A8895
-:10A0700053F7B9E20A6E798A3D7A73C1F331BBECCA
-:10A08000EF6671401B96EA0B9FFB6F9164A4E3257A
-:10A090006F620BAC2349234731CE43ED6C11ED6C5D
-:10A0A00013EDC7C3D56BA260C7A44C19FD1C297D55
-:10A0B0003BAE9707DA3CB85E7A241DF1EA5FD97BA4
-:10A0C0006C2EF8A3BA87737A0CED801DABE43A5876
-:10A0D00037616A8FC27949382614DCC7B64BFCFC5D
-:10A0E0009A7CB4247DEEF9F838CF234A3708786E8D
-:10A0F00067853CC8FF94EA413DBABD4D7E1CFC9F7C
-:10A10000ED4B3D37C3FB336DB2472CA1DF06B9FDE4
-:10A11000B415E2A8B0EFA91BB09F33862753497E40
-:10A12000CEE1556B30FEDD2798CA5C3C5FF690832C
-:10A13000C8B71F60FC6FC7A20ECC1FB02416F7DA99
-:10A14000BA20D09529741E2E85F1FD8EC6F6230FF8
-:10A15000015D542F1F44BF6DFCC4C6089C5F6A8B11
-:10A160004774A0DBF4BC01E3ACF4E0FB7463F20AD7
-:10A1700003E2B66D1E87FD915EC9F8B12342908E51
-:10A18000336DA7206909F653F321387F8D2C9DB0DC
-:10A1900087EAF2ECA1706B724522EF1CC1B69F8A70
-:10A1A000ED4FA26C8C59F4BD7AD287FEAB107E9233
-:10A1B0008810A79E2DA2DF7CED82A3088B6382E12D
-:10A1C000D3216E6F9904FD3D93C5F1EB0979983E5B
-:10A1D0000FFE41C4736112E2F636B7AF34FA0FF6E0
-:10A1E0001D9FEE3C079E625F9D7CE324AC2BF164D7
-:10A1F000F0350F94AD89BF21E027BFFD4D8C1F3D89
-:10A20000D07A67A047986A879D59FA4C7A6E013DCB
-:10A210006197C1B1309EF312F1969276B87AF253FB
-:10A220003F3C9A87DFAF24971DCFED3BBB9F62F683
-:10A23000DD5BDD9B7F7894CAF8062F8B17F965F3F9
-:10A24000B7A0374EF1FD330DF93779F2B3C1CBD654
-:10A25000D11FF8FA8619067F1CFC6798DFFEF67599
-:10A2600038EFC5F0A6FAE00F4C1FD87E38B3E77779
-:10A27000B495F63B26F35CCEA21E2896E7F20129A0
-:10A28000217B97E5E927579E8BBD9E075799244A66
-:10A29000E7695B35C9C0F912B9C6241B417E056266
-:10A2A000F41AACFEF872BED5417E14794F16D6C5AD
-:10A2B000195D32E05C3235EBFDD4A12C8EAFE49217
-:10A2C0009F72F3B9C5359F0D5EE77C8A245E0586D3
-:10A2D000492CAED46D02BDA3CA06AC4FEA1FE8F903
-:10A2E000FE8F3D9F64058B8B896A86141A7788EBF5
-:10A2F000F1A4D7BCD40BFB8D377902F4B0B54A4634
-:10A30000FFD85DFFE35EE6BF0D3612C962792DA866
-:10A310000749A769C2B95F4AD0920F6B887E1CCEED
-:10A32000BF4097837FEF8BBE6EC2BA7B5424C9199E
-:10A330006DD45FF63622FF77ACBA8BD9A1EF2582B8
-:10A34000580DF52DDCDFEA4C4DB0EA26F3CD88D66A
-:10A3500013BD314F5FDFE4657A6DF2BD15BDC9F104
-:10A360009ED9EB83216EFF697DD11B4305DA571718
-:10A370003EB77E1FA7F3262FB747AC3ECC83494597
-:10A380006E3804269B74CD607A3D2D4D2D89725B0D
-:10A3900040BE6F02F9F352F9663B15936FDB5E28FE
-:10A3A00036FF6E3BC1AD7F2A3DC78DEDB9B9E438AC
-:10A3B0006EFF7D90E7BB516977F0C9C7D7F942BE00
-:10A3C0005E26EDA934870DE48B0FFC7D3817075905
-:10A3D000C8B3C776733EFA02ECBD1B0FEA676F0184
-:10A3E000B9F385991F8E8B11EC3AC970CCF7047FB5
-:10A3F000F879E8418E4F2C7D358B0B87EC7CB94A80
-:10A40000F547E93C39AA3F1E28A53F4894C5016C91
-:10A41000FAA7E2C9F814E5F33ED430EDF8C42330CE
-:10A420007E09BEED3F1FBE8DF03CBBEE811F1FE1DC
-:10A4300079094EBD7DE93A8C9F15C393CAF5A8B73B
-:10A4400080DE7E17E7E1BBDEDA0B9F07BB5E51FEC5
-:10A45000F37AFE2DA27E9AEEBB8D928576D4B0BEA5
-:10A46000CB427B0E6885FD3EBD08F3CD488CA07EB7
-:10A4700084869037E5D74DE45F801818D793EB9D1D
-:10A48000784A11E77943B4CBCADAFD82FEF66F91C0
-:10A4900071DC89B896CAF2CC6C3B149615F82D3E47
-:10A4A000F2F9638DAC1DEAFD62F44884E90938FED7
-:10A4B000017BA358BEDB24FDCE71A21F8A97D65321
-:10A4C000AEFA4495F4D70B9C234E6D2791D7F3F445
-:10A4D000DB5BB08EF3F213CC27D77761BE1FF11888
-:10A4E00010EFEC8BAE23094AE720617A2505E54A97
-:10A4F000C83F59ACE13985CEFC3F8FC2E4F125AFAE
-:10A50000EE88DF8A2AF3A7ED7AE5E6FF6EBA3F15FB
-:10A51000B28F2E97D97EF1D61792BF87BC066B44B7
-:10A52000D0C10E3EDD9D43FB6A43F65219F2D716A9
-:10A53000CA33B1DE863D8DF2EA7C7B89B0BC018AEC
-:10A54000889CBF3EED7529A77D4780EE536916179D
-:10A550003995FE57CC0B38B54F443BFA54EA832566
-:10A56000D7D369BE8FDBF54EEF134DF453524266DD
-:10A570001E6D7F5A32C305F308A8994EF2F4DC270A
-:10A58000D2A2436EDFBA3F2183FE39DDAD08BFA200
-:10A5900073752BD049F1DF906E9421FE558E2E48B5
-:10A5A00067CFDF376C3AFB55E6D7F5ABCC4FE9D731
-:10A5B000DE447ACFD0E7A5FCA614A7B35F2BAC5F2F
-:10A5C00094103BBF55BC56E1BC0917BD7EDDB94EAA
-:10A5D000DF69FC8655765E3B2CA595F3C127645A4E
-:10A5E00002D8D11AC9A6203F9FB2F165883360888E
-:10A5F000918ABA76F229E19314AF1FAC574D210A24
-:10A60000F057858B28AC513FC81B05FFC373F85525
-:10A61000BA8E86BB8218471E6CDD7418CC84E83D68
-:10A620009FC5D0D33650F6183F7D5F5F7B0B5F67C9
-:10A63000B4F3CF0C76AC8678A544E23CBEE1D125DC
-:10A64000DB5F2BB0BEF3FC65E19C6FB25D313E0574
-:10A650005CFE908FAC2DAD9F36337D66D17FA05FC1
-:10A66000A2AEF6336F71C6C1359207D3F73B65C210
-:10A67000E33537BEABE3CC2247141DCFB13C5A06BD
-:10A68000EA13AB1AF2A742098980DD3EAB39D10E3D
-:10A69000FC2FC7F761C2F2EA08394EF2D7D5DF7254
-:10A6A0003D547FE79705B0A7CF18540A1601AC2C8C
-:10A6B0002A645FD8F95A1370EBCBA80F0729D61874
-:10A6C0003768F5A0DFBBCD38A5E5AFA7EFF1712660
-:10A6D000E79FE8D2723CADC5F9970D8FE95F78FE30
-:10A6E000F32F4F73FEC39B9D76F074E7E5475C0F35
-:10A6F000959BFF0B1DC79EB7A9EB83E9C3FA3B9F50
-:10A70000C57CC5AD2DA5EDA3A9F37604F7B790419F
-:10A71000CC4C81763F9505977DCE4A8524899177EB
-:10A720000E255EBE7C1FE415151B574CB8FC0DDED4
-:10A730004FEE135412F15C442FF33DDCE81E89EE1A
-:10A7400087C12D57ED919640DE9689F95FC3DD26CE
-:10A750003E9F987F9F87E32B108FED5FEB782EBA9B
-:10A760004742BBC243CE2D21C861DD963B02F53A7C
-:10A77000F7480A3EE5F905B4EA4C6847D06E5D0437
-:10A78000C19E5A3CBFC77EA023A827912E06D38620
-:10A79000006FF59A669CEBE53BE97AD8EAE7B0CE24
-:10A7A000E16A0E6B1C6EE430D9857050A630C4E9A6
-:10A7B000BD690DE100871B395CC3E16A0E37715832
-:10A7C000D885F05699F537226558FF010EEB1CAE7F
-:10A7D000E1B0C6E1260E93036C7C1F8303DE0CEB15
-:10A7E0003FC8E1460ECFE0703587E7725838807079
-:10A7F00051BD1C3391BF93F3DFC9F84608F72FE32F
-:10A800002EB86BB27E9EFF39D0AD0BF9E78ADE22FF
-:10A8100071A7C53EA667C6DBE398BF44FD52EB5463
-:10A82000FE792475A00AC52D4DDE6EE23C3D5278BE
-:10A830005DD8EBCEBD2E2AC56FCD79E2F7A1FF2002
-:10A84000FC3EECB3D73DF3C7C7DB0DC4D3DD9FBBE4
-:10A85000DD08D52F24CFFF0F48190BBEDBA0B60FA4
-:10A86000FA355EC599E77AB7CFCBBE5BF1B13CD77D
-:10A870003E8EDF783B3B8F189817C81C10A6C61772
-:10A880003FE763FEFFF76D3C9551F48F8239BA6262
-:10A89000F3FC9DE1584799FC75E9DFF3F314DD7192
-:10A8A0008F7F8577749C805A984F774FE89B5BAC7D
-:10A8B00053B4AEE2A7CFC16FD122D1FAFC7C6AFEBD
-:10A8C0009E081E11F5CB595ACFCE2311B17F3C976C
-:10A8D00020F52CEE25F2FA384E23FB8EC15C0CFBE2
-:10A8E0000C7DDECCC711A6F6EB6E97F5D5B0F9E27C
-:10A8F000F8D8792B22791EFB99C0478A23BFDCCF79
-:10A90000213F59532FFCF985C25EBDC87869763E58
-:10A9100054AEFD135C5EA6C86791797DC467DB29E0
-:10A92000A3269C23D97264CBD7F9CAD105CB096C75
-:10A93000484B8BCB894592B86E247025174D5F5ECE
-:10A940000AC84936BF7EAD52CDCFF90D94178A8F14
-:10A950008472AB317C6A1747B03F01D6389EB7701E
-:10A9600018F840E9BD5CA9E67C60F18C009C3BE6F0
-:10A97000B5A7C421BE02758698DE67F5AE51D83AF8
-:10A980005FD551CFF027BC7F17BEB43F25BF3F91A5
-:10A99000D4BBE49CE1FDD70A9B5F5A9FC55DDCE315
-:10A9A0004B02E22B92B8E5A1ED3EC3EBBBF5975D00
-:10A9B000DECFF11BF690CD2CCF234EF2BFAB0C2A8D
-:10A9C0001EFEDD235B676EFDE405B95A72FE72550B
-:10A9D000A95EAF550AEF3B54CF37437CB6D8BE7360
-:10A9E0004299D80F9AF9BC4D6BDE7F077A68D9E49B
-:10A9F0007C568AEFE57CDCE9E27B7A2ABE15C9D970
-:10AA00009B5C4F548ADF35E789DFCB2EFCDE29B90A
-:10AA10003ECBF7A34AF1FFEBF394877F9CCADF8A12
-:10AA2000D69147991E7F3F739EF8FDD28D5F917539
-:10AA30002B2B8C5F1661F221A904E33395E2D75DDD
-:10AA40001E3FEE8FAFE9376368AFA13FBE5D59D3BC
-:10AA50006F4993F89984E9F5E98EBFA3E2F1DFDF4E
-:10AA60006F4A93E37F5179BF637C89CA0F085BA566
-:10AA7000E33E56E9B8D64D0EBABF96BAC931EEF9E3
-:10AA8000F2FDEB158FFF5107DDCFA73EEAA45B3542
-:10AA9000304FA4D271FFE13CD7FB6F38BE41457304
-:10AAA000EC03C5ECF7B3DCAEFD84A239E4B858FD85
-:10AAB00037B9BDF2BE0AEB9FE6FDCFB5F12953FFD2
-:10AAC0001E8EFF3D15D6FF1DC7676585F87C9FAFBD
-:10AAD000C362FB6780F33D083A32CFAFB9D03CA6E2
-:10AAE0004DBE84E08773CD67BBF1FBC1372545833D
-:10AAF000F377D249D01EF79F0C1DC0DC4C3BCE4CE7
-:10AB00001296C0F430C6B7BC11239AEF5FD87E9777
-:10AB100024C5CD42E76BD57EA6FF04CDE862EB5D90
-:10AB200026F03D47B1FA417FE1F84B1519CF421E9F
-:10AB30002F89F2F3A2B31FD40BC6FFA57802BFAFD3
-:10AB4000D6647200E2CED5EB1CE7F9311B9FA889D1
-:10AB5000F8C81AC347960CB350FE72839FCDABDD85
-:10AB60008FED1F0AD171C2EE7160F80DF8E35D78C8
-:10AB7000DE5F2D239FFA43CEF3F09B793F7FC5E93B
-:10AB8000EBF796CE1BEB98D9AA40FF7DAD2C6EAEAD
-:10AB90001303CF05FBD5D2F71A6CEB66E78123FCD4
-:10ABA000BBD2147C573A1FF2A4A23C3FEA19FC3EE8
-:10ABB000EF4C8BA7E4FD3821C3193F0F363BCFDDA7
-:10ABC000EC78BB5F777EEFE38B3ABFF7F1CE943C36
-:10ABD000F87D91CAF2B1CAE16FE773D9F586A4A4F2
-:10ABE000A215E453C611EFF7459DF8BE7BFC63ED5B
-:10ABF00083DE51AD105EEF14DF8AC51B26E8AD92EF
-:10AC00009319A6371CE7D4DD5CBE7C554A12F4329A
-:10AC1000D5BB45DE07587B358E790A4A34AE633C96
-:10AC20009AEF030AAC873C3E3D68AFCB80C7CE436A
-:10AC3000C6FB5E04DDC4734605D69130B5DDC4BCE9
-:10AC4000DA72FFF66ACC4FB46A155C27823E8EDF5B
-:10AC50007BB9C799EF3777F96939C36FEE86D2FBB5
-:10AC600027315168BDECF4333DAADC10D79526742A
-:10AC700055D1EE71E3F10DBEFE541B7FCBC473EED4
-:10AC80004AF17FAC42FCED7128FE5F013D4BF1FFC4
-:10AC90002A94C5F07F8AEBA31AA2F7E09EAD333D5C
-:10ACA0004BC88D7A7E7C3D1060FDD6703D4548BB1B
-:10ACB00023BFC4CBE9AA949E43B65E2B438F3D2E9F
-:10ACC000A5E7289F8FEF959A8F17383D8100DBB756
-:10ACD000947D719D2E4D7249917939C5F19819E095
-:10ACE0007125AB7D5A72F5A30AE93835392FAFF2D9
-:10ACF00079F965293A4E72B94A8B64E569D84FE70C
-:10AD0000DA790A6B1DF33287F327EDB3E7A5C33178
-:10AD10002FD5D39C97DF5648CF9CC979798BCF4BE1
-:10AD2000AE949CE5D57F9BD7FF13AF8F76E29CC096
-:10AD30001FFBE1BC6CBE3FEE09D44EEE6FB49E1813
-:10AD4000583659EFC1E163763D1FD6EB9CA8A704A6
-:10AD5000F2FA23D66BFD70AE3DC0BF0BF9FE70E872
-:10AD60003DBC5D18DBDDC0E8A1EDAAF2FBFFC6F03B
-:10AD70002B76FF33A05ECFEA3FD9F522F9F5E60442
-:10AD8000FE64D78BC27361DF447F75F9789CF2FF54
-:10AD9000733FCBCF71E5776995E531782309BCE73F
-:10ADA000A18684D290073B28B17B172C6A541F845C
-:10ADB0003C595F224B2AB0BB3C0A6BE7A3F6167CDA
-:10ADC0005F36432387FD3AB82006D907F9AD11094C
-:10ADD000FD813BFD89A5815A8627C8CBC0ABCC1E1F
-:10ADE000EB5197F2380AC36B67F06329E84FA378F9
-:10ADF00041FF0F06C387A1FEAE065907F93ADC7082
-:10AE000017DA893B7B2402EF775E2FA39DB8FBD531
-:10AE100010EEC3039281F9D59629EB6037DE1DF859
-:10AE2000D3894D141EEBA9D284AB911EC4DFF290DE
-:10AE3000781FF6CFECCE2D147FC80BC6AD0BFAED04
-:10AE4000647E0CFDD541FBBB57EB984FA313767F77
-:10AE5000D350AB8CF9483BEB9BDA61BCDDAD0ADA31
-:10AE60001DBB6F68EAC13CEDD600813C801A5517C6
-:10AE700020EF31BC422616C011BD07ECCED0F20047
-:10AE8000E446929A7A365E683EC17BFEBC241D8FF2
-:10AE9000D1329C9231BF77F70D6B593E69AB4FC3EE
-:10AEA000EFBC2CF3E5D872C25295E127FE23017C5A
-:10AEB000BC734402FCB7E7399C9E685FF21C319C6E
-:10AEC000A9B05EB6B27AA19484F74E95AD97AEB0B4
-:10AED0005EA6C27A5956AFECF93DCF9F54E83F8841
-:10AEE000C3F95DE7B760C797FA5E6EBAF9B93B037D
-:10AEF000CEEFE9CAB5B7F372CBD10B879913788A35
-:10AF0000E5EB97FD1E73E65D51F83E6DA8F65E5EBB
-:10AF1000DEC7CA3AFEBC6E4B14EF8BACE3EFEBEE30
-:10AF2000C3FB23DDFDFC0FAE8F9B49BCE43CD4701A
-:10AF3000FC5FA7B8433CBB592A930F10F1B8EC4D06
-:10AF4000A7DE5324AB03D7ED0D2C2FC707CA00D6BD
-:10AF50004D3D5BC75E928CC7309E658617CD9C5C6D
-:10AF60003FDEB61771FDFCA04E24422BCE0FFB8EA8
-:10AF7000D225276EB9F0B9CEF52F544E7EFA2EC9E0
-:10AF800089372556B47EBCE90AEB652AAC97ADAC8F
-:10AF90009E9C122AD22B72BAC27A990AEB6559BDCD
-:10AFA000819532DFD7870720BEE5BD5271C00357B8
-:10AFB000069CEFAF521DF0E032677B79B9B3FDE03C
-:10AFC00072677B79056B6F04F7BCC78A55BE4EFE6E
-:10AFD000CF79AE9366A574FD506B9975A5687E68B0
-:10AFE0005F23E904EE1DA2FB5586EF5B05E33F6B93
-:10AFF000826CFD5F1FD01CF7D3FDA5D3D91C64F86C
-:10B00000DAF496C3D7D6BFFF57E47657913CFB6A74
-:10B01000D03990774DB275D0EFE13BBE550776E55C
-:10B0200023AFADC07B3DFADE67E7CD1898F7239DCF
-:10B03000F8FECDA0C71E49CA04F2711EAD368E5D62
-:10B0400012C1EFC908D8CBD48DC2FB3E1ED92CA1AA
-:10B05000FDD1775BE97B4DBED1CDF284FE8EFBFD49
-:10B060005FE5F7713DC5EFE37AA25BC7F260773326
-:10B07000965FEA36B07CBCBB15CBFDDD26EE1B5FD0
-:10B08000ECEEC4725F771CCBBDDD5D58EEE84E6020
-:10B09000B9BD7B33FF5E2D89E570F7162C87BA2D7D
-:10B0A0002C07BA5358F675A7B19CFD3707862F5960
-:10B0B0008AF99290A156147FE37967DC61E1B301CC
-:10B0C00007DCF23567BCE1B22FCF76CAC5A34D8E3F
-:10B0D000FA97ECB9CCF13EB66DB1E37D53FF950E16
-:10B0E00058BFAFC3015FF4D9BF72B4AF4BAC75BCEE
-:10B0F0009FD5F56167FE57DB06C7FBF0D24F3B607B
-:10B10000B5E54E47FD40EC5E070CF73EE7D7BF3193
-:10B11000D8C4E2819111473D49DDE5A8F7A999E638
-:10B12000FE20C443D361B42F1F3929E03E38E32207
-:10B13000E3359027F25311E5895CCBF2DE673425C5
-:10B14000AF80FBCB88945CF1C150F97BA4ED788F84
-:10B15000186E4DC03EFBD66B820EF6AE10DE323F4F
-:10B16000DF9FB3CBCD67926414E2923CCF4C9B4DF2
-:10B170004C13FC46AA4F08DAD9C9ECFD18B7F4E025
-:10B180007753692181F74E539BD9F8EF1AE4CBBB73
-:10B19000F7DF20DAE5673482EBA0BD4369ECA7ED69
-:10B1A000B72F90F17BBE29F8BABE8B7923C8FCD7A4
-:10B1B000ADF7B378A576C4DFA82C85FB321233C077
-:10B1C00055B5DBA9D997F0DE5335662C87AB01D492
-:10B1D000E60CD9A842BD2CDEBF40EB7F1396FD44A0
-:10B1E000FD4D594BA6CFEB3627E6C2773DDB79FF05
-:10B1F000DB0FFF8C5C42F91A5A7A9CDC8AFECE5E29
-:10B20000E45FA8758CACC95BBFDBDF2EFCBDD12F22
-:10B21000832CAF667B8F85F7CC29D96FE37DA8F6A9
-:10B220003C045B8E9304F4DF368EF7036FBF9F7D83
-:10B230008FB75DF85134CAE9EA71D285F8001DB7BD
-:10B24000523DA7DE9214D6B4B0E773F3FA85F71B2C
-:10B25000E17DC212205FBD127EC9F07C13E5179D0F
-:10B260000775734628C9AF58967D1FD15C845F94DB
-:10B270003FB7A29F3BE8881BDA7CDADE739C2C6F19
-:10B2800001FB9FD59FE02BE5C3AD797C9CE0C7B265
-:10B290009F627E6BC8FA1159A2B276406F88D2B70E
-:10B2A000B100DF29FFB07F9B1FF63821CA2F869798
-:10B2B000657FDF88F775DAF91F767DF8752EE7F977
-:10B2C00087941FDEB1EA8DF03D687B4B02BF131EF1
-:10B2D000503D789FD080FA4CD6C3E519EA4992D9FF
-:10B2E000FB639E67DE2B145A7F4EFB1F32A6F3BF13
-:10B2F0000BEB57D9BD990391327610BF2F58E4F765
-:10B3000005CB52BCB391AD53A3874CC64DA78EBF9E
-:10B310000BE916A3CE7DB57F93733F8B691FC6F8EB
-:10B32000745FA403E16279F976E9CB31BB51E6F8A9
-:10B33000787341768F71CE8F789AB919585E93AB36
-:10B34000C6F2EADC1C7CBF2A5787705B6E2EC257A0
-:10B35000E51AB1BC3277393E5F99BB14E1D6DC12F5
-:10B360002C57E416E1F3E5B9AB105E965B89F0D299
-:10B37000DC6A2C97E4DAB15C9C7B2FBE5F94BB1E29
-:10B380006123F7412C2FCDDD886573EE23F87E7E97
-:10B39000EE66842FC96D44785E6E3DC2B1DC6710E5
-:10B3A0009E9BFB14964DB9FF8A6563EE0E7CAFE75A
-:10B3B0003E8FF0C5B97B10BE28D7877043AE07E13A
-:10B3C000FADC5684E7E486B19C9DDB8D655D6E27D3
-:10B3D000BE9F957B08CB99B92FE1F3EADCE3586A6D
-:10B3E000B9AFF27BA09FC2329CFB2696A1DCD3F8BA
-:10B3F0005ECD7D07E160EEDB5806722F60A9E40E9A
-:10B4000063596E9EDCDF2F8911E7BE7C0D99E190B8
-:10B410008B5539E7BE7CD57893035EF96BE7BEBCEC
-:10B42000626CB1035E76C2B92F2F39DEE178BFE8D6
-:10B4300098735FBE34EBDC97E7673EEC80E7EDDBAB
-:10B44000E0A83F37FD6907DC98BAD351FF62CBB95A
-:10B450002F376C71EECB7392230EB86EF32E47FD2F
-:10B4600059E461877F58DD75C051BFCAFC8AA37E4D
-:10B47000A8F519D7B94986E979E339C773A5F94819
-:10B48000C1F395D89EEB3D6F803ED13DFC7B7A7E2B
-:10B490004F2BBF0FCD3D9F355C0FCCC831BF28C2AD
-:10B4A000D75D2DACBBBC7C266A3F3436417E08B7E5
-:10B4B0001F6634E94F1FA5F05B4DB2D14361DB7EBF
-:10B4C000B0EB97FD7B14FC3B7D1F7CA7AFA3FD80F9
-:10B4D000F7B7DF7D4AC07B1E6AE6107EFEDFD90922
-:10B4E000FB5A0A6C69767F0EDEE7936AE0EFC9FAD1
-:10B4F000EBF07D23835FD876EF1A88A3A6BC76FB9A
-:10B50000AF5E07718B949FC12F6F5B3F08EF6BAAF3
-:10B510001275B09FEE2D726EF973957DBFAEAAE6DF
-:10B520004B6AEDE4FDD1BF8824FE37C0B729898B73
-:10B53000E12A6EB8BF1EEE67BE56327F00CF3F20B5
-:10B54000993F54715F70FA05EB20A7B516FFAEC4A2
-:10B550002B2ADA4F87703FAA79EF36FCFE3315A20B
-:10B56000F8A8C5F139A68A13FB0DB1F79B268C9379
-:10B57000A29D37D840F0BEF85475DC82FBFBACEFDF
-:10B5800029E4A00174A7591212CF3B4C5DAADB72CB
-:10B59000E1D89FE09EBF0DF47D30A1EA6087A9E469
-:10B5A00038E65584C938961AD104C73DDA36FD0D00
-:10B5B0008C7ECA9771A04B26E6A1317EDECEEFA528
-:10B5C000FE17CE9737D565C5F9F21EF13EA2D1F12F
-:10B5D000F7533B11F6C5FD5081D2F17494FA9D02E8
-:10B5E000E09988B760BFEC7E08FB7E38E9E4B7F1EC
-:10B5F000DE063B8E23896D9DB83DB730BBAF93FE11
-:10B6000003BBAF36EEB423DDDF9948AEB8CE74E3AA
-:10B61000385521771C47C573E2335D1EBC57B158BE
-:10B620003F763CE7E9AED2FEDCD7F97AFA1ABF17CB
-:10B63000E42BFC1CF7497E8EFBB7E0CFD1F2CBE0C8
-:10B64000CFD1F200F873B4CC803F47CBC7C09FCBBB
-:10B65000FB6EE4B122F7BC5C526DE72B6C41BB3D45
-:10B66000C8EFD9206414ED7409EC742A574F1FED0C
-:10B670009D19A37CA7BE06D2B7F9FA0EFC8E9F0EC9
-:10B6800061C077FEB7BFF1FACCFF1281AF6FD9F777
-:10B69000C3B43EE6494A2DEEEF48CA8C2399A81759
-:10B6A00082D41F481BC5F933ED7E1513AF6C9B7E0A
-:10B6B000BFEC3E9FC975D389F924414EB78F7C07F3
-:10B6C000C739C3FD1922D6FF2FCC8FBA4222A5BE9F
-:10B6D0000F9C32CE34E5EFE365E40FEECA44BB3392
-:10B6E000C9E663E173C7EA0ADD0B61CB61CF6B3E4C
-:10B6F0008CAB0E7D8FFD1D8AA30DF21C885F8C1E06
-:10B700007EB111BF5FE4F2D877D4997F509F244275
-:10B710007EBF0F75B338445F84F5ABAB2C6FC14D62
-:10B720008FFD5D53AA4C3EC3837CDCAF07CDFB424B
-:10B73000A80FB378EFE3C2E7948F00BE8FDEA114A9
-:10B74000E4F3D78389FE50ED543CF3DBE33D14C5AD
-:10B75000DB6F0B2D2BDEBEE519E517A474FB3DA5B1
-:10B76000DA5FF615E59132F83F5A187F6B3FB4ABBC
-:10B770008FB2BF4BD653F7FA81AD14DE7B07F38748
-:10B780008FDEBC0EFFAEC3402D9BB702FD3E510ABB
-:10B79000AF85CF757595C1EB1BA5F9DAD55586AF89
-:10B7A0007F5FAA7DCB335D27CAF0F5BBA5F9DAB57B
-:10B7B000AF0CFEFFB3707BEB62D03BF53A8BC7F565
-:10B7C0003452BE523C866CBEBAD643817E5F2E2771
-:10B7D0006F65F0FA79E979292BAFA74AF3B5ACBCCC
-:10B7E000FEE602E5F5CD227CDD0F785F80BCBE7DF4
-:10B7F00081F2EA0D5F98BC86C225F5405979AD2DDE
-:10B80000D5BE02796D2884BF8F044DB0A7CFB4B0E8
-:10B8100073AFCDED1EF6F79134A6EF8327AFC37D4E
-:10B82000B49FEE53335A61BF3EB5F7F6A593FBB311
-:10B830007BFF71F7E7DE3F6FFF973544A5F022BE2F
-:10B84000EFD9F80462EE7E4ADF2F31DD7125FE77F5
-:10B8500096ECF6B337BDD3E339F777E9281B9FD0D1
-:10B86000F157E33921BB3FB7AAD51D979CEEB8A588
-:10B87000EB476FB9307B607DD8793FD49C2DDFDCFE
-:10B880007F3AEFDEB039FC3B2F2FF910DECF446E4C
-:10B8900063F940E296A7F79F5E92774F141915F26D
-:10B8A000F37FC4DB46F79FCEA33B07711F8C1F5B62
-:10B8B000989718D3AEC4FDBDDC3EFE28DFEF1FE62F
-:10B8C000F6EC3E7E3EB1979F4FA4B93DFB003F9FF3
-:10B8D000D8C6EDD9117E3E91E2E71303FC7CE279F4
-:10B8E0007EBEF05CF73E7C7FA83B83E5B7BA9FC481
-:10B8F000F2D9EE517CFF4CF7218447BBB3CC2EBE6E
-:10B90000E756CC839DA4C3E474DC8BF7BCF4D797D3
-:10B91000B6CB1B92CE78C89CCD01D73981F39C62FF
-:10B920005697332FB2DA74C643AA5A2F73DD47EF06
-:10B930003CA708365FE9BA8FDE190F9123CE78C88D
-:10B9400015879CF19005A3CE738ACB9F749E535CA0
-:10B950009A71C643E6EF739E53CC4BDFEBA83F379B
-:10B96000D5EB8C9F58CE78C8AA71E7F9C455BF7E35
-:10B97000D819FF1973C643569C70C643961D7FC6DF
-:10B98000012F39E68C837C2098C8823E5C9475C771
-:10B990004332A84F7FA2B2F33DDBCFA6F55F0CA3E5
-:10B9A000BFA966AFA2EBBE6F33BBD7BD8F687E0D5C
-:10B9B000F5F067D16FF04EDCCF1CCFDE1F99D43F7E
-:10B9C0003BAF3DF553F06BBC21764FE5EDC27559A9
-:10B9D00092EFF778DF12F2CF23A588534F94ED5FF3
-:10B9E00062F7107AC12FD18ACBDDD47EDD7EC9B556
-:10B9F00059C893F2025E06EA1B1C27CF2F1946BFD7
-:10BA00006496444AF9A753C699A61E7AD3A58726F9
-:10BA1000FC9228BB2F4597482FE0B1F7A8A7E0BDBF
-:10BA2000BFB61EDA192DBD0EED3C979D5D95E56301
-:10BA3000EF3C5ABA9E1DBFD2F97DEC5EADF0B9F76E
-:10BA40008B619657F9C12AC2FDE6FF2F3FEFA4FC98
-:10BA50005C59F59F467E78FC72E3107CCF24BB6076
-:10BA600091C3E1AA4FAF81EF9BB610760E445E61A1
-:10BA7000F7AE961B27D6F6D1CAEEF5D398BCC65AB8
-:10BA80005761FE24DE33562A2EE1BA57CDAB5AF069
-:10BA900047F726FEFEA3BBFECF6B58FC28D6F5B1B8
-:10BAA00092F6CD41BEFF7F89EFFF31B3F4BDBB8F6E
-:10BAB00071FC5F787516DAB57B6F637A5BEAFA879B
-:10BAC000C3609F8D72F9F791CFF85B80AEDB2402E3
-:10BAD000E7C373419669FD8B55928173D02DC440A5
-:10BAE000B9A63F3C5FB6FB176F73DA5B7FB0F91402
-:10BAF0002FCD57FB9E4CF7731FF94E3BF25727C9CA
-:10BB000087ABE15AF52FC4FD149E534B10AFD41EE2
-:10BB100003ED2E99E2A11558A76E7CECF5697F4FD5
-:10BB20002A6DBADA82F673043BEE1434204FE78CA8
-:10BB3000AA96BCFF6D4ABFD35C8F5F9BB21E6FE8B5
-:10BB4000FD4964F2FE2BB285FE964FDEEF596C3D47
-:10BB5000DAF00BAF0EE1772D29D5BE1FD0BE4F8B8B
-:10BB6000948C9B6EE57C1FE6F92D5B5B3A7A5F87D0
-:10BB70007353BA5EF2DB05173C8B71C77EED19BCBF
-:10BB8000C7689BC1BED756171D55C01EE8D78EE0AB
-:10BB90007D71C1FA7427DC3718A472043AD03F6F64
-:10BBA0000F7FBF0BDFABF599149C7FA8F09ED235B9
-:10BBB000D2FCCA61F89C3B50FDE6E10EA85F3F7ADB
-:10BBC0000CDEFB3582ED2575F47807C8D966827FD7
-:10BBD0006FCBE2F72A356435CC5BB858653049D075
-:10BBE000F73ABED756537876177B6FA819F4D74823
-:10BBF0003331597B8A1F85A347359CDF996A3A8E7A
-:10BC0000FD4758FB99C6B326E0311C637FCF47ED53
-:10BC1000228F031F16A90C6FF8CE8C8DC3E988B153
-:10BC200071BC6A26DD017AA6DEC693C210378DB0DC
-:10BC30007164957D0F49C7C7FBA67C2ADB0727F4F3
-:10BC40004E5718C73B13218F97FA7B01F67A7F9CDA
-:10BC5000DBF9FBB99D2F2973BE783AEF3E867EFE55
-:10BC6000F7421B55E777987FAC62EBF1C51A9667F0
-:10BC700056EE1E49F259763EFDFF00D7C62C0E0047
-:10BC8000800000001F8B080000000000000BC53D75
-:10BC90000B7854D59967EEDC796526E126992493D3
-:10BCA000D7E426241021E0000141B19D445454D42E
-:10BCB00088B6069F43409E01026A89169B9B172403
-:10BCC00021C0A02E445E99605154D0C18252ABEE87
-:10BCD0008029C5D6B6A9F54195DA08181501532A69
-:10BCE000CAEEEABAFFFF9F7B93B9934982B5BB9B2B
-:10BCF000EFD3C3B9E7FDBFCF7FFE738631C6BECD9C
-:10BD000081FFCD8B61212BA33FCAFB1258283F2C0A
-:10BD10005F9AA6CF7B72F4F98211FA7CEE587D7F90
-:10BD2000CE4B75E55F5DCF58870332A2D7CA0A2094
-:10BD300039F2A0B52496B1BA8C1A2B83EFE7EFD174
-:10BD4000CA991DF3B9528CC09C8CB5960A81260302
-:10BD500063C115350D79858CADCC10189321754DC7
-:10BD60001FE2837ADFE2DF0FFBA6DBAB180B0D6768
-:10BD7000ACA9CA4F6963550B0B59185B953170BB61
-:10BD800000B6837ADBAAAC946EA992A8FDA62A1706
-:10BD9000E55BAA644A3754E553EAAFF2505A573587
-:10BDA00091EAADADF252DA5C3595D2BD552554FE1F
-:10BDB0007C5529E583553E4A9FAD9A47DF77555517
-:10BDC00050FEE9AA4ACAAF1E23DD5E02F0D959A58A
-:10BDD00050FE89AA064AAB2558F77828BFD2E3C29D
-:10BDE000F2DA2B596930CA3AAA2503D55B23012C14
-:10BDF0009318B3318F6006B831C8EF00B80D553CC9
-:10BE00003516C827DFC1088E432B3C356680B33416
-:10BE100085E7D7E138D0AE92312FC376B92CB02365
-:10BE20009BB19C06F69601F2AE7CA9CD98DD3BDE77
-:10BE3000F5EA7850EE12A89C05B0FCB8D97B839443
-:10BE400084FD312A1F16EA1400DDECE2B742350EFC
-:10BE50001867D41B811A23E4474E56044C630BFD2C
-:10BE600082AF00F12A14E338E75608D48F5CC80487
-:10BE700001E61774713A585D04F0095BB7EDFC36C2
-:10BE8000161AC758C38AE943D800784D29157AE9AC
-:10BE900011FE8BF786D13FFCD710120E1A619C73EE
-:10BEA000406F2CBBFF7E2EDEAFEF675430A29FD2D7
-:10BEB00081E73172A7BEFD458188F640D7C81FFDD6
-:10BEC000B51F76FE065A6F7F747CCA5C56258DEFCF
-:10BED000CD8BE77FC042898CBDED90080F09D73527
-:10BEE000BB10CEF03705D72B6630822BA03B540613
-:10BEF0007913FCAB09AA8A0592978DC65456538FC5
-:10BF000097C561EA55F325947FDDE45B83781625B8
-:10BF10001FC3F920D9205FAFBE08FE9986F9AC0691
-:10BF2000EF64C8FF08FE792963374A23A62A90FFE9
-:10BF3000CAE4132A61BC3DD942603BC07B79CE582C
-:10BF40009203B58E81F9B34EE5CF9EF549255E0388
-:10BF5000F4935E2E8D453AEAAFDDA3E5CFBF3E0CEC
-:10BF6000EA294EC19327F72DDFA5D2F1A325C214EC
-:10BF700007C22193D3B1B69EC8FAB0EE5DB86E93F6
-:10BF800093AF3BE996124A73775D632D1905EB8BEE
-:10BF90001F980EB644AC2303060A46C1FB499C1702
-:10BFA0008C93FBC67C1BF53B63E07E1B55B9773E4B
-:10BFB00020B00EC4B35841F236E9161FCB85753553
-:10BFC000A40A0107ACABE19B7B1BB2111E070492D4
-:10BFD0000B49B754305F41DF71C5DCEE6A01E9F20D
-:10BFE000C07C26C3F8165705530A30AFC96B9F01B2
-:10BFF000E7932C495750CA025EEC3F79854FC171D7
-:10C00000CD2E3FC1A521B5A7BE0DBF6F080924DF06
-:10C0100057CAC06F064A9903F9BE82513E23F561A3
-:10C020001A977D0DF39900FDE0BF01C1960CBF1773
-:10C03000E541C345CC8372C496CF8ACCD928A60EDD
-:10C040001B50AED91E609E269C6FEA130ACA23E5D8
-:10C050007246F80605C7107E30BEF526C0677ACB5B
-:10C0600068E20B5B6EC880EBBEDDECEB427C6AEBFA
-:10C0700037BB3A091E0DDF184BA3E1E537AA9CCC6C
-:10C0800044BC45C1476C3C97D75F9982D7A01CDD63
-:10C090009324B0ED86BEF52C6ABDCDCEE97F94E544
-:10C0A0005EFED4CADFC64586F173FA7933CD3BF71D
-:10C0B000963B87E07AFAA383552A7DAD1BC2F540F3
-:10C0C000EEE43BBD08EF73F05F5394792C182253D4
-:10C0D000BD9EF53B059D5CBAF0F989249F724F35F2
-:10C0E000927EFF2A7B607A6D50E7F955A6DE3E10FE
-:10C0F000725B08CFAB5C804F19ED0481C5011C5BFE
-:10C1000055FA804F84DF20E8A726C07FEB8AB3B6BC
-:10C1100002C867BC6D4432017A98A7A01EB15DC405
-:10C12000E941923BBD0CEC9098FC6EA2C78C8A4E04
-:10C1300003A680F7BCF8F1480F1374F47046D59F3E
-:10C14000F057E79AA08A3299F8BE201EBE7B77C1CD
-:10C15000249CC80F7C7C13F32A669217952C08E365
-:10C16000DADF32D2779861E8A142945382A7C903FB
-:10C1700074D05E938C7C684FE2F265DE35C524BFD7
-:10C1800000049E4D30E6E24FBB929740DEE3E27240
-:10C1900019EA5B719E628159A737061D47F48670C4
-:10C1A000FD7603F3F83DFDC3FF3BF76BF532948F4B
-:10C1B000DFBD5F10A4C968DE7138323655C175DB4A
-:10C1C000D5755BD8AF689C73380EC2DE98F13B849E
-:10C1D000AF78B1C88C51E8B5DF718C770CA83F2AD5
-:10C1E0008FCEFF637B58FDD9F1B1CE2E9804BB846E
-:10C1F0005DF22D128ED12120BFA21D40F607F20064
-:10C20000CCA3BE82E363F44B8753C3E9FFABAA79A7
-:10C210007F6C07A5B947D5FBD51F5A8AB1FDAA5F28
-:10C220000B010BB46FCF34A777C2F7E08143D93845
-:10C230002F4D3ED7B6EBF57C46053384F7FB98CA05
-:10C2400017B54EDEAFECF058A3F1FB5AB55E836331
-:10C2500060BB61A33AEEB3766F753CD175C880FCC4
-:10C2600039FA25EBED38DF2D4BAD51E1FCACDDD7D4
-:10C27000189FD4779EE1ED118F03B45F3F50FB828E
-:10C28000E7ADEFB381DB3F163FBEFFF6239EB66EF0
-:10C290001E64FE6DD1C7575AB15D86CBCC90CEAB34
-:10C2A00053BBB6AF86FC86A5668F05E8B37DC68F07
-:10C2B0005D88B7FA248EB728FDEE1A685EA35F2A60
-:10C2C0002D1D645E7B076B3F085C5F1E18AEA547A3
-:10C2D00006816BFB40ED473C5DDA32C8FCDF883EEF
-:10C2E0007F250BE54E866C263D539D0D704539AE7E
-:10C2F000C135821FA2F4FBEEC07019945EFFF63DBB
-:10C30000E9F5E381C6BF007AFD7C60B80E4AAF5FF5
-:10C31000F547AF38EFEF41AF42C2807019945E63CA
-:10C3200012BE1FBD260CD4FE02E8356DA0F95F00D9
-:10C33000BDE6441BDFC2EC5E05EDA202AEC7E71509
-:10C34000095CAF4B5CDEDB8F5E4D7AB40EF454E2D9
-:10C3500044D4D7C7362C2EECD5CF91FA27B2BF489C
-:10C36000FDB9F8EF57919D3B46D57BDA7C6272238D
-:10C37000FBB97D40FBEEBB8E2BBA58C816D7DB3E0F
-:10C380006DF6BF7A3CBD7E17DBF9F80CC6BF6222A2
-:10C39000EAD5691E84F79089669D5DF9DDC71DB8F1
-:10C3A000BEEB8EEF670FCC49007B6064AF3D905EC3
-:10C3B000F98BD61389BDFDA48B254C72A0BD778B5C
-:10C3C00017E9829533CF0E2CAEDCD37A625CAF3D99
-:10C3D00000F037DC14B66F3496075B4F84ADFBFC7E
-:10C3E0006CA6EECF14B27773A54B49BF0FA6C7B5A5
-:10C3F0007DE326F44F0D477F94A4FAA35CAA3F4A3D
-:10C4000056FD50DC3FD58CFE29F2834DE47682EA5E
-:10C410009FAA57FD532FABFEB19754FFD8FEAA0039
-:10C42000A52F54EDA4746F5590CA9FAFDA4FF960F1
-:10C430005588F2DB1E9823233E7BD7E155D7A1F91F
-:10C44000F506B6FB332BF47E90F4797A3F482AFA4E
-:10C4500023C3F229E1FE4886FE9B1C5DF9908923E7
-:10C4600074E5B19EB1BABC3DFF525D7D9B5CACCB27
-:10C470009B9DD7EAF217EF9F1EE1E7B94D573E7239
-:10C480006759841F6781AE7C78CB325D3ECFFFA0B9
-:10C49000AEFED0861A5D79B6D2A42BBFBCFB615D1F
-:10C4A000FEB24F36E9EA4FEADCAE2BBFE4C8D3BA9E
-:10C4B000F2F11DCFEBF2E30EBFA4AB7FA3DDF76B70
-:10C4C000948763420723ECF400C9D310C80ADCFF49
-:10C4D000B857485778A3E0F1BF86F07D2BD8ED45DB
-:10C4E000642F833C6B1A83ED95121BE4D37F0D34CC
-:10C4F00027E396DD676043216DD7CB1F63F977E3B0
-:10C500006BF400607D37FC215FFE97B6AFDD6953A9
-:10C510007E80E3FBB83C56A4008BD64FAD6AFFE6A5
-:10C52000EE9C3184E8532A96A2C985E366DF27E1B1
-:10C530007A4674E8E934D71BCBBC385EB9E637E3FA
-:10C5400072CFC8ABB0F4A3571F36A09FACF4D57818
-:10C550009CC73675DC06955F57229F0EC7F55E16A1
-:10C56000B2A870DB04F29919277B06925391F0FA76
-:10C57000AE72CD90A8976B208F431FA1FC2E17039E
-:10C5800003EDAF347996FBD6DD03E24783AF8647F0
-:10C59000A3245D81F2C196ABB032475F3819654E76
-:10C5A0000FFFDBEB9623D67D8EBD5CE4C5F309E679
-:10C5B000894A273DEB2DBD8BD6A1E133B2DE0E5566
-:10C5C0000E3FAEE2B54D95C342B347403BAC5595E7
-:10C5D000C7C2A3DE1A84731EECA7713F686EAE0853
-:10C5E0005901EFA60C467AD2E804388CEEED77D8E4
-:10C5F000A37ABF4B6EB35E2EE6D425E8E021AF48A8
-:10C60000FB4EFAB42FDF5D46F68D468783F11F920D
-:10C61000FCB743FF99712E8CBFDB672753FF0FAA2E
-:10C62000FC0D1CCD5385BD89F4533651252026DFE2
-:10C63000FA3EC075FE611343FFCE0FBF6E3DB415C9
-:10C64000D6619C6891D0DE014D78E815289FEDB544
-:10C6500096607EFED151663794BF930644E0C2F2E5
-:10C6600092389403A7993015FD77A7D99B71E3C23F
-:10C67000F4EEB244331FB7C174ACD38AC32B748EAB
-:10C68000758F9FE7B575CD6DD1E7E7B0E9C9228C0D
-:10C6900033E751134852189789C73A353800FECB13
-:10C6A0001225EA772EAB58897644BD89917F71D1E6
-:10C6B0008BA3CC683FCF1F27651BC7F4CEE3C144D3
-:10C6C000EE673C09F42687F98B173802662FB43BD6
-:10C6D000BE77DC8F2F63D84F60651AFA3BE3C11E2B
-:10C6E00091FBC27756837E9E83AD2372DE8CD590FC
-:10C6F000BCEF6F1EE24E833710852F1B12B95F5DB2
-:10C70000C363ADF567AD9D304F6FADC86C3F80BC66
-:10C71000C8CF9994A3B1811D28BF8B2B9EEC44BF39
-:10C72000748D45AA8574A3FD67CF61FD4A4018CA80
-:10C73000CB3D8932F7ABDADC013C7F60ACE292E9B9
-:10C74000B1DFBFDF17B0DFA47F7DBFBFEA67BE8B5D
-:10C75000AC9D66E4FF2562C55483807E453EBEC520
-:10C76000E4F3A6A33F717F51289DE9EA355C60BDE3
-:10C77000C3869C0BAA375518A0BF33AA7CFBCDAE4D
-:10C78000C7CD28CF4E3FFDE10DB82F5AF82B23B36C
-:10C7900042BD33BB625988ECBE8019EDBE057B8D6E
-:10C7A000DE00E543136E8E0DE7EB5AEA7FE173B1CD
-:10C7B000B4AF5AF0BC25300DDA2F78E1F86806F2F4
-:10C7C000E04C4DF7A17484DFD306B2A399D239FAB5
-:10C7D00066F8BE4064779744B1833F48E476C7A9C2
-:10C7E0005FDA4B91DE0C3B0FDC45FD066F3559C21D
-:10C7F000F4D8DB8926AD1EF9BD95A70C813C039FBB
-:10C80000DF4DA3C2E757CDEB3DC5FDB90BF69B024B
-:10C81000369CDFCE36B30FEA2DD9F977A2EF2B9EE7
-:10C82000DB1D877058B2DFA8936B0B9FFB66E5A5F5
-:10C8300080E78546D63D8DF4F8D7943FE7B5761B63
-:10C84000490E79E30C20B71693C8827ABFF8F8AA8C
-:10C85000F7A1FCA4CBC86C200A4E767C64FE15E6DA
-:10C860007D8E0A5049D0BF9E0F97EC3C6EC6794929
-:10C8700002EBCE0046FFC117617CC9FAD667ACDB7C
-:10C880008C727649B0F1EF46A0B7257B4FBF877415
-:10C89000B724829F4FE23F52FBEA4BB333525FBE55
-:10C8A0003101FDE66C276C8226F5AF2F35FE5EB8B0
-:10C8B000FBDC3605C63FF5FC67DB144079F97FFFEA
-:10C8C00063DB4F61FEEC559B847269C9D36FC7B1BE
-:10C8D00030F8673BF939D399A79E7C6213C0E1CC4D
-:10C8E0005F2C04B533AF7CEC96D10FBFE73F92F1DC
-:10C8F000DCE9BE57AE4C413ABB6FDF152903ED2B87
-:10C90000906E039670FC0608BFF27E182705B22FC2
-:10C91000AB69045E4EEDF9CA8CE7095F1A5837CA55
-:10C92000DFC5C16FCC78FE70C8CBBA114EAFED3DFC
-:10C930007EE841C89F063C59A2E009D69F2E905E32
-:10C9400001F68174F1DE9B6FBCBC10539347463CEB
-:10C95000B16E92F77DF0FB16E0B7B017BF91E5E737
-:10C96000D8D76684FF925D80CFD18857C0E7E8BEF4
-:10C97000F83C8DFF98D4179F5EA7DEBF7D8E95B7DC
-:10C980006EC2C2BD8984FFFEF0B968DF8F06B4B302
-:10C9900034F930189CE719F8BC1C4E6F893309E94B
-:10C9A000C2AEB8389E03D3A0ECCCEE736E0674F220
-:10C9B00089A9FB2E8443F72B1609CFC916BCF22E8A
-:10C9C000F1DD997D7F3223FEE12FCE3001F2ACE71D
-:10C9D000EF4D06F9C5DC06678B58F755EF1562CAAF
-:10C9E000BA150FE18FF287800F091F819BA6CA2815
-:10C9F0007F0349B4EEC501CE1F8B03076E318CEE69
-:10CA00000BF726A7A0E9AD1EBC1A26223E3FBC0AA2
-:10CA1000E9AF3F7C6AEB9770FD9740F9CFF5FC1BBF
-:10CA2000597F31F02BEE8FFAE03770E00F989E6956
-:10CA3000B38806B085CE9878BC4724DE7BE1CFF57D
-:10CA4000F377B58FEB9C91FB02DE5E83D360FC3EF7
-:10CA5000D8FABE2BFC963965EA37128EA7BE8EAE89
-:10CA60000F02AAFC58CC2AA6A60DEDABCF4456A2C5
-:10CA7000A467F7CE7765D04872FED44EB0C70D7D5F
-:10CA8000E5C5E27ECEE19F75723B66F1FE03A351E0
-:10CA9000AE9D3AF84B952E39DD2FDEF5A15951F5B3
-:10CAA00043205C3EF7733EBC5F9DF79297A3F7B7B8
-:10CAB00064D7DFA3F67752F4DE8AF33FD961620AC6
-:10CAC000747132689C1ACDEEDAEE34E9ECE795B178
-:10CAD000138E0C8176C6B81819D75D5BE37D57417C
-:10CAE0003BE64D139DFF33D1F38905CA6B63636445
-:10CAF000F4E7D5C6CD6172981EAF8B8093E82AA16A
-:10CB0000F355D15952C8F77401DD39B00908227CB8
-:10CB1000DEA07733502F7D30E66313AEF36F1176CE
-:10CB2000E4DF44B63205FAFB9B62F054CBD1F60742
-:10CB3000FAFE7D2B8C4C0EEB7FB1A5FB03F2C7FDFB
-:10CB4000BB8DA15D667CD5664079B2649B89F65D3C
-:10CB50004B601B8570FB78AB2DA0407EE32FAAEEC7
-:10CB600042BDF4F9360B9EBDB2D7F62DEF7A00E543
-:10CB7000D26603437FFAE7BFACFA12F5F2FC2D460A
-:10CB8000DC2AB2B9F6EE27B0FDDCE7D2592DB4FFAE
-:10CB9000CC109C809BD9AEA4D004DC8774ED4EF5FC
-:10CBA00028D4CF8B8BB1DF33CFD9A9DF33FFFE2E53
-:10CBB0008D73E6DF6349AF69F3077B5B0ED7E360F4
-:10CBC0006FCB3D7C40F41A96877116629ED7377CF6
-:10CBD000ABCA3C947F0B3105BA5FB87F8817F791D9
-:10CBE00061F5A89F2596EE9F7868FFADA409B477FC
-:10CBF0000AA5213F2EDCA91FFFBF5579B7C4DC3D34
-:10CC000087D7F7A771BEEDA076F624955ED5F2C85A
-:10CC1000F65A7D5B528EAE9ED67EB1855544E38337
-:10CC200064B5DF853BBF19AEEF4F51BF478EC3BF21
-:10CC3000DF6F600AEA67B6C746F169E5E6D0B0047F
-:10CC4000E0DB17CC6C1EF26F795C68583C8CF72BDC
-:10CC5000556E96C7401EBEA7A9F3C0FA9867D6CEF8
-:10CC60003388D7452FDAE85C65D10BEF7E89F83C35
-:10CC70008530068C9D4AEAF8F2A74007A7B61A99B4
-:10CC800002F6DA224BC8BD19F5D41E0BDB8EFCFD73
-:10CC9000EAEBA4B74E3F6F11C2E3E222D34541A0B5
-:10CCA000066BDF7528C52CBF02E6A3ACF70A6DB88A
-:10CCB0006F386C0C54C3D895A2B7E6395CDF6113AA
-:10CCC000ED33CECE66F9B8AF3CCBD23C0AE15F7E05
-:10CCD0005784F2E5BF35199AA28C6B3A0F4A7F1C34
-:10CCE000F0C1F9EB983C0EE3C08652BADC5C311C13
-:10CCF000E5AE5182C51590FF81EC7693D3C3E64231
-:10CD0000BA3C81F9107ECC716D0F7FFD1150BAECE9
-:10CD1000313905DBFD2089DBD5F393BDD726917E24
-:10CD20007448A43F543A55F6F1797E6588F154630E
-:10CD30005CCEF907EF46F82EFBD02087C79DF4C6DE
-:10CD4000837A28EEAB5294DF950B69BD248F72A5D0
-:10CD50001886703D2B0974BE7076B63C243E4C2E6E
-:10CD6000AFAE92487E3456B9285D5595CF64F26BCC
-:10CD70007B286F54D76F29509811FA419EC63F8B7C
-:10CD8000A3C48B761ECE09E3828C0E1FD111C6354B
-:10CD9000A11CB33A18ED638D0E85CD453FBF83C30B
-:10CDA000C7E82821F898D5BCD8328DE009EDE9FB19
-:10CDB00094645F4512E0D39A31422797CCCEB1BA42
-:10CDC0007C1F7869F8DFFD7F053746706AACB25288
-:10CDD000BAAA6A22C1ABBECA4BF9FF07B86DE470AC
-:10CDE000BB94C75AF4C0AD5897EF176E8F01DF3868
-:10CDF000C3F906E0887CC3623C3BA2AC3F32DD5005
-:10CE0000C528F8E6E1AA164AB5EF09FDE8ED2F932B
-:10CE1000B81D50C97CD5261C47E2FE16E65458C6FC
-:10CE2000845EFF2673294CC63CF22AE2E5480CC119
-:10CE30006ED95F6DE437364A6257B85C5B76BD9C4D
-:10CE400082F2CB58F9383B9E18E6479B566293090D
-:10CE5000AE1E3AAFAC55F5667D0FFEF47CB0BA4A13
-:10CE6000A6748DCA0FEB547E588F78C6B8130F3F47
-:10CE7000DF6C9ECA482FFE1BE4F93E3EC4C2CF9D24
-:10CE8000E23DC19009F04D3252A63444F1C0472C26
-:10CE9000813C68672F605EA48FF8230F90FF1823F2
-:10CEA00074D19F16AFC28DBD9C133F23969667E247
-:10CEB0007A871979EA37A13D1E09D75ACF412BEE5F
-:10CEC000AFFB9B4FD107F30D38DE5733084DCC79BC
-:10CED00047F008C6AB3A9AEDA457933D1559E8DFE1
-:10CEE00063472D449F0E8FCF30370C7FC9FDD87517
-:10CEF00095C9D79C40FAFB086D25C0EBC32D436D47
-:10CF000008E7D5A6A00BE5DDEA78AE3FE45280C283
-:10CF100025BDEDFEA0CAC1B8423DBF6BF2559A3C9B
-:10CF20005647BF9A5C4D98A2A7734DAEEE4FE2F6FE
-:10CF3000DAFCE4922F51AE269EDF427C1849F7B905
-:10CF4000D2A5A53E27EA01E669427B0D6D46B4E312
-:10CF50003E340438BD73FFD4D9CEECED68E7C0AEE3
-:10CF600080E48A82FC4078EA7EED5B68B75B950FCF
-:10CF700035D6E9568A73043A6214B72E1380F1FC51
-:10CF800090A9F1ED9C3F2652AAD1676672B62E5E3B
-:10CF9000D0987B48407CD5831D4171C5B0BF73E0FC
-:10CFA000F9F8814956B4F74493E730CAA9EE5821FD
-:10CFB000887AB3DE31DD8AE74A86F842C2FB97B150
-:10CFC0006559039D7B82DD427E5BC9E161C7701CB0
-:10CFD000C6C86F6B94C632DC27EE7674C4E0BEC55B
-:10CFE000912CE8ECC4F9C9BE9CE4B0FC281C5DC5DA
-:10CFF0001776BB5BED2772BCD1C9AADF324361DE75
-:10D00000B0738B4A8DBE65854D09E3EF9ABCAB5872
-:10D0100067415FBEEE576EEDF87E72AB362B40F87F
-:10D020003245CA0B27C87107A58A0028352A59AB93
-:10D030006F1F4374558C70608EED3D76C80F73A2E0
-:10D04000D0D791112914B7D9A36760D75C407A660D
-:10D05000E3446E8FA87A86EBA7B3CD76D24F67678D
-:10D0600057503CD5D9E61419E9EEC0DACB46233C3B
-:10D07000E69C6F6432CC6FEEF94994CE6B7984D222
-:10D08000B296362072C6AAD7CC5D3B03DA1D7FCCA0
-:10D09000E841BEEE0A8C3B5309F9AE660B9E11B116
-:10D0A000AE2DF766A15FBC0BC641FBAA6B4B1ED130
-:10D0B0005717C08DF20DFAFA182F6C04BC9431A6E4
-:10D0C000C619CA5EAC3FE775635B343BA96C9DC56E
-:10D0D0001BED7CA7A7BC25BADD568BFF4CC5FF55C1
-:10D0E0000C4778157DF04016AE57E3FFE509208F19
-:10D0F000105E1F5858347FFC94E42B17223EA62460
-:10D100007BEFE5784988EA5FEBA57F3EEE7101ECA5
-:10D110005BC28B2FEE269D9F95FB318FABF62FB315
-:10D12000F6531EA7B697A2972F6AFEECD043905BEA
-:10D130005550518244AFEDA745C6F7D38BF7DFA416
-:10D14000C6F9F3F9809D4A74CC001F285F66ABFED8
-:10D150001E80FB8D78AFE4F8EB4603D2472F3DF9F4
-:10D16000E2D06E31ACBEBE663794FFE330DF9FCDB8
-:10D170003FBF9EE49D61F5A88D93E0FBBDAF9B484A
-:10D18000CE57375DB6EE0EC0EF176F18293FEFBCD4
-:10D190008DEA7DFA9067E31D50AFFBF726B2C3BF5F
-:10D1A000387C25C54D7C6AD2FB092E4BE17CBC5FE7
-:10D1B000E5E739E75793FDA195CF69986596894EC4
-:10D1C000D7D2F739786883C1BECAADBF2B12F13C04
-:10D1D00087D1BD85FDC9B75C57437A6D2CD9FB73E8
-:10D1E000D7583CD1E2A8F727CB3AF933B7B399FA2D
-:10D1F0006560173993D5FEC2E4C8DCF389C4074CD7
-:10D200005218C619CF51E549CFFCB69874F2E453D1
-:10D210005B743FC8E164BE8F9A73FE32E2AFBEEB2F
-:10D22000FB017D9FA38DDBC9F9B1773D1B27455BD2
-:10D230004FEF3A2653FD4FE3A38FFFB93A7E57D500
-:10D240003CE605B95466817A0E1CFFDE95130B711E
-:10D250001DF10986B075CD6D59C8BC61EB9ABB65EF
-:10D26000A6B92CACDF5E3C2CFD5D516E2F1E3EDF5F
-:10D27000507E5D0DCAA3E492F7916FCA565F3E1AC5
-:10D28000E9716E4B23C1F9B8C9E346F9FA71CBBD18
-:10D2900071BEA8F394757A6B6E8B8A1FB0770BC33F
-:10D2A000F0A3E125B27DD75FE77EF910CA9FC7B82A
-:10D2B00071D31FBCFAE02D3B3ADC6C291ADCF299E1
-:10D2C0008FE026BF7004E97A8DDD8374DD3FFC4674
-:10D2D00032DF40F0EBC77E057B474849C27119D168
-:10D2E000E9DC164E0783C1AD775C950E8AA2AFE7E5
-:10D2F0001295DFBAAA2A99020C7BCC3C181DFC942B
-:10D3000029D601D6D14307FFA6A3834B52D6101DC1
-:10D310007C82F6CAF0BEF83F6656E22EC5739F26A1
-:10D32000239D2B1D8B51926FE3F931288F8FC5F907
-:10D330006FC0731A2D3F7F475EDCCCB0713F6E002B
-:10D34000384481DF252911FCADD14FAEC20A26FC3D
-:10D35000EFD1CF71F59C38B2DE94E4A2CB52507F6E
-:10D36000F8A3FB6BB55493D7C6218E9E7D26EACFDA
-:10D37000638E9C2F0350DA94ECBB1AFBA98BFFC978
-:10D38000DD280F8E1D3390BEADFEEBF2E1A8D72253
-:10D39000ED04D87F36E0B9E77263AC9FEC50B1A2E0
-:10D3A00095CE411591ED28C47D4AC5A61379E8377D
-:10D3B000ACA494A976E872E3080FEA6123AB781273
-:10D3C000CF49814824AC2FB20A3A3705415882F937
-:10D3D0008D767EEE5A295A254B585CC252955FEAEB
-:10D3E000AB4A1E39817E68ABC2A4F0B843C6EDAF2C
-:10D3F000FFC47986E97BB3C92779701F6A6025C8A5
-:10D400001726D1D7900DFD9B5CCE314A181E96A4ED
-:10D41000F0F3765B7B7B4336B4B7DDF37B89EE1D9F
-:10D42000C138E867B3668867C3FDD5266790EE0903
-:10D43000B1DCB0EF6057390A20AFF303C07C07B00E
-:10D440000B7F65F0B8BE447AACE6F098882082F491
-:10D450002FB387B6A15C9E28D61931EE68C63D79F8
-:10D4600094DF38EBDB619D51E861C6CBAB3AD09ECF
-:10D4700099F172EA2C3C3F98E118F611A6B05DB024
-:10D48000C640FBD70C2CD804E914EBE314D7F89A68
-:10D49000EA1F6BC77C985E6C57E90DEC9CA97B205A
-:10D4A0009D61F59B9616F4FAD322C7DDA0E2A5DDB7
-:10D4B000144C1A817400E3E03AEE7C39F02350FDFD
-:10D4C000EC8E60E0FA51809FBB58B709E1E8631227
-:10D4D0009D7B687EDD32E651F38CF6A7EF979BB615
-:10D4E000239D44F6774788F777673BF407E95D8724
-:10D4F000BB7F8D6AD91794AEB2B3B0FEF67B0ED95E
-:10D5000059DFFE22E1EC11AD46250CAE8022211C34
-:10D51000EE7DE03BA4F45A36BA7F3EEB85379F4759
-:10D52000243EBEC022E0D3408AF77994C35529DE59
-:10D530005F605A6EED768B4037EF3B7D2F221F2EBA
-:10D5400036FAB292011EA7337DC393102E1DD1CFA0
-:10D550005F23F93BB7F4F456E49BBBAA4586785E9B
-:10D56000B9EFE3ADC897A74DC047B01F78ED818FE5
-:10D5700063916E16010386CB930F2AF3C87E3ABBE4
-:10D5800077F880F1A71FA8FE923FAA7CA2ADF36EA8
-:10D59000644018EFEEBD76DACFDC5D69ECD9672127
-:10D5A000BDDF5DC9E34398D831FA169DDD59A79ECA
-:10D5B000B3F5ED07F71191FD7455F95A89EF45DF81
-:10D5C00004B4BB8F57CD6B45F91239CF3C97EF1898
-:10D5D000C2756ECB4C5DDCEDECE6F9ADE17CA8D517
-:10D5E000AFED47BEBE344C5DA7958FC7E48B8B1C57
-:10D5F00013F05E35FFB385AC1F1AC2E861B0F15875
-:10D60000EE146F8F5CA07BF702EC59FBF617594FB5
-:10D61000EBDF5579053B3E0ED7E7FDCF94F183CF85
-:10D62000DFE452E599DA4EFB6EF3F919DA85B6AF0D
-:10D6300087909DF0D230EECFF80FD52E600E582F88
-:10D6400032987FA3F7FF63BD3030C5E7D9B658A243
-:10D65000C615A5B9443ECFE0A1226B94F9F5E92F98
-:10D6600024B20BA9F7D230BE7E749391BF6B580CD5
-:10D67000ED6BCA2A6B699FDD08F203F541E47C8EED
-:10D68000356DA678689BD92FA35FB4715872760D5B
-:10D69000B403A9467E1F5B8C5F16C3BFABFE205B45
-:10D6A0008D5FC6FD6D635E1A7DD7FA6B347039AB42
-:10D6B000F14523ECFB9E27BF98C7351DE0D2F856F5
-:10D6C000606A2CB4DBBE92858C6EC60EBAD346E27D
-:10D6D0003ED75F6FA6F3BDC67C217536E4E332AD5D
-:10D6E000E41F6B8B0FCDC07B078A4124FDEA8F9727
-:10D6F000AF8945FF6E4D4A07CABF834BCDB4DED517
-:10D7000093F8BD35CBA527FC5760FFF7310FEAD55D
-:10D71000EDE77FD182F7FE9423B09F45BF21760AC3
-:10D72000F268FBD4B336DCCFA5605C1DD0D91653AC
-:10D7300090E6B5A9DA42FD6E6A339746C3DFC95455
-:10D7400091EA070C9D141F9CC8823684EBC353A733
-:10D750006FCC8576D9B94CC2FDFCEA82B3DABD72D2
-:10D76000233F8FD2FC88CCA69E6759D5732ADDFD56
-:10D77000B8CDFEBDE43FB44F0BF274AA40FEE7C83B
-:10D7800079DCEBE27E37FBE48EA9A827EC85023337
-:10D79000A07F3397D1BD66692A58E19066E7B37ED2
-:10D7A000DAF3754B5E685FC8DBA34F48BAC0F60B6F
-:10D7B0005D3CCE700DFAA1A03C60F218AE817904F8
-:10D7C000AE970C8ADC5BAFCEC5F56B2BF41F22390C
-:10D7D0001AA075B9F38321A43777B940785A33F189
-:10D7E000189D0B3C5CA8F9513D348F2DD5EF1C40A2
-:10D7F000FB6BCBFD8CECA42D2843A1DD96EB59806F
-:10D800009F27B134946F9BE69BAFA3F3FC0280BFCC
-:10D8100081D2A8F3F6A55A892EDD2B1E0EE13DFE1E
-:10D82000180FA37713208D5ABF2195C369932990B0
-:10D830008AFE91FEE8E256151FEE4AD5AE627E17CB
-:10D84000E275AD0A1F76CB58EE5F10BD72781C579B
-:10D85000AF3EE17E0C581FDDAB4DAC33933E12A6BC
-:10D860008566E0BA12F2CDECEA6CE42F0E376594CF
-:10D87000C0E3CE58A005F9B3EDA2648A275D250464
-:10D880005CE86F568ACD749E7C70A230631E94AFA4
-:10D89000AB33931F02F2C42F7E6F4E1BF29B7D723F
-:10D8A00071E93CC8AF97CC12C2B7B640B2211DD7C0
-:10D8B0007A05C900F9B525DA3D091683781B63346A
-:10D8C000DAF2A1BC3555401F2D6B351888DFEBBD52
-:10D8D000C5FEA1F0BD5E721AC2FD002FB9F8BEAA46
-:10D8E00022ABE42517F28DF761FF5099E3529C407B
-:10D8F00024467FB12C340F636EDAEA9FA0FB546B91
-:10D90000C65819DAF199F7F9E97E57EC456619F12D
-:10D91000BAFD7CE2485A5F9D59467E5E6F085C8383
-:10D920007CBF65E92105FDEAB68F1CCC08F682A311
-:10D93000F3EF55183FE62834479C633101E5B836CC
-:10D94000AEE3AD10D153A7C1F7E758F2FF1434E5A9
-:10D950003BF11E46CC0484E7DA4BDFCB9F13852EC8
-:10D96000C8653B16ED6521346134CA29AEC79828D5
-:10D97000A586E3777D66DA5FD0CFB4AD08E68FE3A6
-:10D980005576DD41F3F2BEF353B4AB1C473FFD26A1
-:10D99000FA3CDF243D127BD41E124663BA681AD9C2
-:10D9A00067E1F540EEAFCDF29E70017C775773B919
-:10D9B000DF7C0FA37729F02F3F0CBECD0520A5E912
-:10D9C0006102803CD62B90C88FBE4A90832184E7A9
-:10D9D000682BD1538A7AEF2172BDF6A38D4B31EEBD
-:10D9E000C8EED1CFF32B15BFF82726D379055AA25D
-:10D9F000CC9C3ADB86F26FCF583915F7DB0FC7475F
-:10DA0000D7F3EFA572F9B0DB10DD3EFF22D5C6FBE0
-:10DA10000759199A40A86214D707792199CE6DF851
-:10DA2000FB0A02970BEC5A467A2F6E4CA7CD1336A1
-:10DA30005E501D87FEA09F216A3B267587AA61FD67
-:10DA40006D40B578AF2D2E93C3D1A1F4C211EB4B2D
-:10DA5000EABA800FAA8717221025AACF4ACC742EC3
-:10DA600002D250F956E88543AC5A7FD344D1608541
-:10DA700079E500300C503F7EAA59778E22D5BDA3A0
-:10DA800060F94F8D4C4E98D83BFED6312C5003E3B5
-:10DA90000FF1EAE11D7BDF0BCBD12E8FA4039C415C
-:10DAA0004FBF182A3E5BDF2EF98E3E7C40F0A479F2
-:10DAB00002689ADF62DBCD0094E69DA2161F4BF24E
-:10DAC00077BCB143417F28C0AA641FCC7FC4536F89
-:10DAD000797741BED9C7F92C36FF85E54897521AA8
-:10DAE000C7D311F42D039C3733E91F18B7A3540A89
-:10DAF00032E2635B2887F47823134B104F8D15EFC8
-:10DB00000828D757EF651E8301E9FFBF2DE1F39B7E
-:10DB100091CACF69982893FC13DDFCFEE8EA02C1A4
-:10DB20008EF2F5E0D21748EF6D3D2030E4FFE2DFE2
-:10DB30001C7DCC8E74FD170BE59B5FAF20B9F113F4
-:10DB400068A744F19F0FA69723EBE72EDA6EC0F388
-:10DB500089AC79417A8F25D12F7AAE467CCCEBF017
-:10DB6000D23DF7427ECEE6981652288F5A0D6C525F
-:10DB7000D9AFA6CDBC9CDD9240FBA85196CE866B5A
-:10DB8000617E9B9F1219EA4BA325983A17FA35BE7E
-:10DB9000E8404DD0677FB4795A2815E5784C058563
-:10DBA00041F7B5E352391FBAA7C9BF1D06FDC64FDD
-:10DBB000E6B0B4F9530EA0BC449B19EF35D915AEAD
-:10DBC000E7D68A012FC679AFBDCF67C6F199BA7F74
-:10DBD000695C54F604C2F91355EFB18A79F48E8961
-:10DBE0005BE5177B252B8AB6CFDAE88AE1F12D0FAA
-:10DBF0000907903FDC5E46FA43AA0C8686AB7A1989
-:10DC0000272EAD78BE11F58BA35CA075AC153BAA91
-:10DC1000F15D89B5F731A95AEEDBDF3FDB7E79AAEA
-:10DC200085E0B1D1C574EBA0F73040BEB9E7455FE0
-:10DC3000C7BFE1B8E37BD711A3AD23BF93F2DA3CB2
-:10DC40005ABDC10B9AC706B53F7F2A7FC7C85EC0C1
-:10DC5000DFEF8894F735F60FE85D9900D8EA46BA09
-:10DC60008F16BC16F3F27302E3F7B5F4FCDD27AFB1
-:10DC7000D255E47799858D938D74C7F10C74A7DA2A
-:10DC80004FC07756140182FC2DF931FC34CF487A0D
-:10DC9000FC5F978BE1F386FE631B9841BDA72A17B3
-:10DCA000A7F6958B4C958B56A68450FEFD5FCB4511
-:10DCB000908324179B61A589B053896D6F5A8A7A26
-:10DCC0005C9387E31127976227D6EB8B0B685F4441
-:10DCD000F909A9BF6FC6F8C855827ADEA5C205DD6D
-:10DCE000500897AF5D728F9EC2EF1BF01F39F89EF0
-:10DCF0004AC2750530DEC6D29C31B8BFB0F95F2488
-:10DD0000FBC05DC0E357DC95FCFCDC9E3BE789F083
-:10DD10007B714B52B99DBE44A3BF4ABF0BC7598B01
-:10DD2000FDA27CCE3593BEDCCC825C1FAAF6E95600
-:10DD3000971A47ACD255249F44CAA771BF7716A340
-:10DD40007C4F355824DCCFA17E3E98ACD7D7482FE6
-:10DD50009ABE6EE9A889477F58B6EAEFCFB6EAE3E4
-:10DD60001C26A4717926A6723FC02AA182F69B4A7E
-:10DD7000B140FB388DFE7AF478041C23E18784BA25
-:10DD80007202C5C7503EAEA89B21FF6E03925D8F05
-:10DD90007A2C5583BB44706EBB53188BF2724F7B49
-:10DDA000990DFDEB06B7F51ADC1FAE3330BAFFB89C
-:10DDB000AEE84D8A2B69AA849E61518E7C61A6795A
-:10DDC000745F3C031FD37ED5AE583AD0AF150C6DAF
-:10DDD000A7B885A6C0A1198CDBB10CE3529AF26BEF
-:10DDE000D216A07CCF2F2944FCB6D59B296E46CAFB
-:10DDF0006751FD0827711F43F3FD6E7ACCAEED2FFE
-:10DE0000CBA3EF2B6F4CE3FBDBA008A20AE69391B8
-:10DE10002F7890FF33EACC51E751ACE2292D8DDF0A
-:10DE20000F6BAB3F44EFCC00BE026C207CC1F46BA7
-:10DE300092C3F031A91F7CB8347C881A3EE2671285
-:10DE40001F7676085CDE925E5BCBA4DB503F2A1522
-:10DE500066B2631B4D7C5FBEBD40E50BC9DA86C46C
-:10DE6000F65DE93A6E9140F7703227F2F7F5ECE58E
-:10DE7000CF535CD366D6FD3ACA3BA580DFA38F6C37
-:10DE80007F679AA0C2513678683FCDF10878A5F92E
-:10DE90006CC94B6E0BE7D38DAA1DBDD1C5F9744B70
-:10DEA000FD06E2D30B9DA726B76B553B7ABED7671D
-:10DEB0004675A0184AAE4A45FDF973FE1E15333A61
-:10DEC000C82EFF049B84F9652B337C4BD2C2FC72B5
-:10DED00092B742C07A57E2BB42D0FEE320BF07FAB6
-:10DEE00071F01745F41E978F1133CF671D066272CC
-:10DEF00090A13B20EF128354EE9A077389A7DB9120
-:10DF000094B75A412FC2844E57F1FB175DF8BEE417
-:10DF1000707C2792BF2FF999FA9EE4A89655C59B6D
-:10DF2000713C59F4A1CC3889EF4BE2FDE789EF5100
-:10DF30005CF42990B54DF1180FC3EF6F4B0F3249C8
-:10DF40009884F935C518F77CEFAB16F59E64470D3C
-:10DF5000DE7B795C60F48EC46A11F4FD502C6A306B
-:10DF60005484D1F1EECB3BE2F09CEF74F0E601FD7E
-:10DF7000C7787F10E7B143A5F7F5F6C574BF6C8E7F
-:10DF800023E4C6F607F63CF9C42618EFB37D567AAB
-:10DF9000D764A37DB11BCB3F7BEC5D37EA8BD3FB12
-:10DFA000DE35473B9F5C2406AFC27B64E5CA105652
-:10DFB00003F32F0ACE3453FCC9AE03743F6D91E4D2
-:10DFC0003363FFE52D7B283F65D79FDC587E348D7A
-:10DFD000F3C7E9549F1BFD12B92D969000FA67779D
-:10DFE0008E7F41D47376951ED7DB5FA5FE37DA5F4F
-:10DFF0003D847839FD9885FC6E071EFB0DF57B6A24
-:10E00000DF8B34DFCF76BF7B17DAD3E58C79509E78
-:10E010009FB6A97E3D6B475CF8FEF615151E5AFEAD
-:10E0200074ACBA0FCE18A49E7A1EC31C007FBA3FF0
-:10E03000D01187F70B3F33F9CC088F85080F488B39
-:10E04000000E28F717060D34CF852D6D74DF6AE1B9
-:10E050005EEE1F5C08F022B8B41CA0F9BF8F7019E7
-:10E060008FEBF8B39BDE75D86BA1FDB3B6EE850ED2
-:10E070009F1BE1A3AD17E0C0D7BDFBC2F03447C37F
-:10E0800053CB9F685EE57BF9BCCA77F179CCD90B9D
-:10E090007872209E6612FE4FED6332DE83E9DAF37A
-:10E0A000EE49B4674EEFB3CA685768F3CA00711BF4
-:10E0B0003716F988EB63B6D740FA98891D749EB37A
-:10E0C0004892247C9FA0A73C600E7079DA519C0E88
-:10E0D000E5CF3C0AF62142420A8E40FFEAE934EDE0
-:10E0E000FE4F871BFD62BB2FF7137D7E1AABC25B11
-:10E0F000EC7063FCCC8674DFE9B4B07882D31FBEC9
-:10E100003802D7BDDC58F19B4C1CE7491E1FFA555D
-:10E110004EC5DF1EA2790FD59D3746A600B7383C05
-:10E12000FFCE17988FEE25EF7D2D26FC1C5A48E771
-:10E130007EB78DF60FE83EE2697CE791E613A438DE
-:10E14000AD61DE32379EF37DCA1C3E3C97FDECE7A5
-:10E15000AF51BC4D57AAE67FEAA07AA7F6BE9680DB
-:10E1600069991A0FCF0237931C03383658C7469364
-:10E170008FEAFDA200BF3776C6000213F5C4560D24
-:10E18000CE15E6E9BA731D2E4733B664B793BF25A3
-:10E1900010FDBE59A4FCCD7D74129D2B9F63D1CF81
-:10E1A00095991A27B7DC1843F1371BED3FA3FBB74E
-:10E1B000958A45C2FB2BC754B97842BD97FF554C91
-:10E1C0009C2200DDEC4FF7E5A48FEF7B0FB76CF5D9
-:10E1D0002237C2B70CCF3D28CEA0ED7A8C27EC4A6F
-:10E1E00062AADDC942043F9356BE9197C7F3FCA4CF
-:10E1F000CDC135F81E26C297D77F829767F3F21FED
-:10E20000A9E573D24AC6A473FF0EBDAFC19829BE5B
-:10E21000CBCA55783478F4C245645D9A5D0D95E7B4
-:10E22000E1E5DC24EAEF32EA4F84FE467DFFFE00A2
-:10E23000EF8A35E15FD08FF55FD54F90F492E0C360
-:10E24000B7AEE09B87EBBFC78B99D414FFFDFBFFF4
-:10E2500067DB2F377A854F910E870844F71A5F776F
-:10E260003D367C0CEEFFCD0D4B43A836BB628BCD0B
-:10E27000A9F0FD9CCCCF4FEE79743D8B164FA2BD1B
-:10E280009BD19357CFF1CC43F5E7B3ABD3B9DE596C
-:10E290009DDEEB7FC373393CAEA28D33FC35275333
-:10E2A000280CB7D3598580F187F9ED567ACFF7223C
-:10E2B000068202E63F928504D4DFA35827E52F4665
-:10E2C000100CC5F7A8647A38731CEB768B43F1FC0D
-:10E2D00039B412EDB4F79DBEC67418EFCBC73A3E01
-:10E2E0003040F94FD27C2F75A25F289DDB570EF589
-:10E2F0007D5C0953A043C13ECD154DEEF7C05312CE
-:10E300004F859FB7DD287A1F49A7F564485DF65E03
-:10E31000386BF26081FAFE92D6FEE4534FE2563734
-:10E32000ECBD70EF80F781E754CE7FF4E7E3062879
-:10E3300057E5ECEEEAC06DE1FAFEC974AE679F4E98
-:10E34000177476218C4A76DCD33771FB69F7E5DEEA
-:10E350009AC751DEB618693FFD69CB9FE9FDC773C7
-:10E36000258CECBAFEC6FD3402EF9FEE78328D9F0D
-:10E370007704F4F1CB4FFC724478BC258059764E7B
-:10E38000E0EF7010DE0F79148B91EE39923FC6CC1E
-:10E390002A789C0ACE17D218DC8F0E453C75501A8D
-:10E3A000C7BA29959844FEE904E6A1D4C94A284D84
-:10E3B0006615066EDFF9294D63414A33D03E457F2D
-:10E3C0000FEBA654C61B9F61F11B3978623A14DF2C
-:10E3D0005D2DE1DF23E28344C4E3B828F23C222E22
-:10E3E00048DC5949F21CE382F29C7DDF53D0E4F70C
-:10E3F00086F4E2F7906EF6A77BDFC7F4F0B3BFE5D3
-:10E40000F72BD618C8BE3E6E9B66960175CF247852
-:10E41000E91D104560253B40BFCFD6FCFFF8A7C5DE
-:10E420000923309B4DA7C2E37798D5918FE7C5B3F9
-:10E43000D4AAB3D4739059AA1F248631F59E9E871F
-:10E44000EEDBCF52CF1F6645F85F98DFA2F3A3281B
-:10E45000F80F58C72CBF81CE0D66C54C7BB593F520
-:10E460004F2761FDD1BDBFB2083FD4A0FEAC88FCF0
-:10E47000ECC8F65603B326E3774E4FCFFC4026BBDD
-:10E480004EF36701C1C9D4AEC1F221F985FC577AB8
-:10E49000C3E19490C1F9C4E6BF3A2EDA3BD95A3AA7
-:10E4A0001BEC335342DFF6B0238C47BED7E4B046B3
-:10E4B000E7D9B8B1453ECA3707068A4B5DADEAFBDE
-:10E4C000A687FC0CE76D0B3D40EF54DF9FA990AF92
-:10E4D000D65A10A0FB0131F9019712657E4DF8BEA6
-:10E4E00033F05753ACFEDC64A9BAAEA519DC7F7BD0
-:10E4F000E8A2E4623CCF5E250B746F7895BC8CCEAD
-:10E500005907FB3D815AF57704B4FCCAC46D0CED84
-:10E5100036DBD7AD0CED499B18FD5ECA0C75FCF5DA
-:10E520006AFD8D89DBC84FD290C7CFF723EB1FC898
-:10E53000DBE042FBBB311BF6BB983EA450FFF579F4
-:10E540001B4AB1BD35D4A8BBCFEBCBE0F6AD752FE0
-:10E55000A74763AE399083F420FA29BE40ABD7D8E1
-:10E56000CF79D2F56AFB265380EEC934A9F6D0D212
-:10E570002DB16BC92F97B1FD08BD6F95CBE8BCD10C
-:10E58000167A8ACE11ACF9666683BC55F6337C5F89
-:10E59000C3561024FCA0B329A4A3DB98DE77368CE5
-:10E5A0007DFBAFFBD6EFC2F53566FB69FCC1D65BE0
-:10E5B000ACC2B351D5AF8D36FD39DAC20CAE57AF10
-:10E5C000CDE0F2DEFA32237932005CC8DEBB3E23B6
-:10E5D000EF06B4EFACFB0785A3AE7E362B1D128D84
-:10E5E0005F22E5BFA340887847C940F33AB7D7A078
-:10E5F000BEBBC8DFB1E8B5038266ECF7D75BCA0ED5
-:10E600005E03F359E07378317EF2C92DDBE99EFE9B
-:10E61000C2174D149F30AC732697832DFC3D46EDF9
-:10E620007DA38B5A2CBAF7A416B1B0F71A61BC853A
-:10E63000473F3DCAE89EB1FEBBF66EC06AFC10259E
-:10E640004E2DF2DD81473222DF5D56DF1D2888EE38
-:10E65000A7897C7760575020BDB10CE358691FB083
-:10E66000AD18F73D95470DE437E8CB87F2D65C53FC
-:10E6700058DEE0217A546263BC3BA2F0D37B999CC4
-:10E680005E76E3A11AD9FD3F5B1BC237BB581DC3A1
-:10E69000F3A6DAFB4409CFB56B033174BFA456125D
-:10E6A00002183792195B6C45FF238B1724BC8776C1
-:10E6B000957132DD7B32DF2F8EA3775AB72FE8C0FA
-:10E6C0007B75B52E91211F67C6F33802962AD0FBC1
-:10E6D0003475D29BF1B3701FE7E0F7F4B2241690C3
-:10E6E0000D68D779199E2FC366A52204A657A6C127
-:10E6F0001BC2F7AED8248BB483BF3373C39809E42D
-:10E7000007A6BF036D57855EC171BCD612C4FF94C6
-:10E71000FB9D640F065C467CDB947D9CC1CF05CDE0
-:10E72000B1C5A1BFE2FC66D8C9B71B508404C4C3FD
-:10E73000EB6D2BA75F0DDF4D0191E21DF2BFA9BD6F
-:10E74000ED6A68DFDD66A6FB161A9CE43A51F77E97
-:10E75000837B853E6F8E78AF426461E5903FA2CEA9
-:10E7600083B152160A8FE3757AF9A1BBE4A0F729A9
-:10E770003E02FEA4F30F35FF9E9ADF69F213DE77A7
-:10E78000FED540FED5836D73B2485EDA17B7DA71F5
-:10E790005F78849F63F6279F7766C8DA3B0936F572
-:10E7A0009D0A1BFABD22E9A9AE8A7930CED01A683B
-:10E7B0008F1989F83D6CF2605873BD2A1F45079781
-:10E7C000E31ADD44A6F511F4576FF2E4FBA17EFDD8
-:10E7D000374675DF78FA86D0640C7B90695F6DCA26
-:10E7E000601E640F93B3234D82798C7CD1ECC1DF22
-:10E7F00055B8EAB9822128E747BE3683E41BC289AF
-:10E80000DE87AF347BD04EB6543A3DE238ACE720D9
-:10E81000BA3CEB30933D2456DAFD647FB54D70C9A8
-:10E8200061726F6595E4114DF47B3794AEEC47DE71
-:10E8300067C50B25E87735ABF672B2BAAEE44C3B50
-:10E84000A5496ABE5554A6233DB702DD60DCCD81E3
-:10E85000159CBE97A55A496F2E7B7D68CA40FEC1A4
-:10E8600027AA5C9E5C00ECB61565E4B72D7AE044FF
-:10E8700023D2DDB258AB8474688C1BB67132D2FDE2
-:10E880006F4D74CFB33676823C2BAC3F63DC4417BC
-:10E89000C2C328286948CF233383378893904E9486
-:10E8A0004D789F7FDCD68D3788205F76C62A6978C1
-:10E8B0005E76D9D6CDBC3C49D96480F22BB6B6F28F
-:10E8C000F24C254D80FC755B1FE7E579CA26CCDF4D
-:10E8D000BCF5495E3E8AEBA3DBB73E7303EAA35A5D
-:10E8E00093A714FDD3CFC2FC0BF2F09D549EDEA97A
-:10E8F000C2452B7F1EBF9BF05D559E4696BFA0B6BE
-:10E90000DBDF4FF94B6AF9CBFDF4FFAADA2ED44FC7
-:10E91000FB836ABBF67EDA1F52DB1DEEA7FCB76AEB
-:10E92000F91BFDF4FF07B55D473FEDDF54DBBDD5B7
-:10E930004FFB77D47647FA297F4F2D3F1AD1FF0737
-:10E940006AFD4EF5BB3BB6E13DB4D7DC20AF509E2F
-:10E95000E4C73690BF6B5B6521D17FED78AEFF35A4
-:10E960007A77ABF702DECEE471A56F6772FB66794A
-:10E9700026B70B8A1EC85D3719E9F0F7FC9E22E81E
-:10E980008F23780F57794020FFDEB2D7F9BB32CB07
-:10E990001E1075BF1FA4B5D7E61F50E759A7A64B99
-:10E9A0003273689C6CC5E59916A61F4D923E6F05A3
-:10E9B0007EC2F8FF3A27D733F90F1437E0B9492D53
-:10E9C000E8195C5FBDC31C42FF57BD2452799DB35B
-:10E9D000D88FE7FD8A24921EAA772684F0BDE6BA76
-:10E9E000BA42DD7B9F759248EFC788F153ACB31CE8
-:10E9F0002837A649283FEB98945044E76AB04F4324
-:10EA00007D52592CA1DCC98E7726A05C9E95C5E16C
-:10EA1000DE1EDB65C37B14E24302BD15304C128958
-:10EA2000DF73EB84800CF368979691FF7547B37A98
-:10EA3000A6C8F879A226E777FEEC2AD263B5A0C76C
-:10EA400064D2636CC898E4DEFB9BE2D19166D45B30
-:10EA5000529A9199402E1FCA4CA071773CCAF55624
-:10EA60001EE82D7C67ADB590F177DE5C56F2EB9633
-:10EA700089CC9518E6C73C946954DF47E2EF50E72C
-:10EA8000E17B8861F01DEAD7EBADEC41F4565625E9
-:10EA9000C8CBB0FA1697A4CB3F97A9BEABE4611ED2
-:10EAA000B46FAE7A6E0BE993B3A84F18EA973FC4E0
-:10EAB0008C44FD027AC4C2FACA414D1E6B768B2685
-:10EAC000A76B55BD511BA1370697BBFF787D38D189
-:10EAD000A7A07B87A63FF9BB1CE304005E269F81AD
-:10EAE000F40A137D74BF7F30B8994C2512DAE383A2
-:10EAF000C1CF94F4453CCA69934FF49C88724F6A25
-:10EB000030F86AF5CCD6F4ADA8D7BE38BA3C1FFDB4
-:10EB10005E2B4D1D337721DD1A86D0FD0E59F53B56
-:10EB20006CABDACF8EE7E1EFFABCBFA56E1CDE1F3F
-:10EB3000F74AE42F492D96B19D0DF6E98964C7F196
-:10EB4000FD26937CFE0568CFBF6896F15CE0F0B3CC
-:10EB5000EAFB0D990E82E7BD7BEEA3762643858BFB
-:10EB60009FF73382F7AAB404B2CBE59D56D56E3C2D
-:10EB7000BDCE0B65B542A701F5CF5BAD817556D40F
-:10EB800027EA7E8029811B71FF130C98D5A01ABC3F
-:10EB9000E8CED81EC1A0F99FBDA22BDC0E35DD3812
-:10EBA00065329E874A2345E82FD56D5B67CAC472DC
-:10EBB000416BEFC5CB4328BEB4BC087878A65D2B6B
-:10EBC0004F593705E6B3C7CCB4FE15ACBF071F835A
-:10EBD000A4BCB40EFBDF5DACB6573E5F87BFDF055C
-:10EBE000F3B9CE087BB0E1DBD2D639527BE79BD3B9
-:10EBF0002AAFABCE052A943BE3701BB7A8ED443295
-:10EC0000EAED55A5FCFEB0F6FB59DA3DE21EBCED7F
-:10EC1000BD494157ECE787FE33AE008A96183B0F9B
-:10EC2000D9016E8BF657584D02BEDFC5DFEDD2DA43
-:10EC30002DDA3B93EC9C252F17515C70947687F16D
-:10EC4000FECC3FD1CE6ABE80F14E87DE5CBC4BC6A7
-:10EC50007B33150D0E23D567DCFF157D7D5AFBD365
-:10EC6000BBDEFC318E7746EE4CBE166AAF0A015C05
-:10EC7000A2B4D3EA6BF7AB27B9BC13DCF0FD3FDCE1
-:10EC80009C0F9958E1413F53D0EAA77B6C3693BF64
-:10EC900004F509803E80710A5A3AC99D4BF523BF9D
-:10ECA00047F257D0CA12A7A1BCBC4FA473F7A05516
-:10ECB000B18F867C33EC53AA614A3563DE198BF140
-:10ECC00002CDFB1C24D76BEF6B77E1EF2B291E33B2
-:10ECD00043BBB7F9F28E5409E65177BFB9F4E74860
-:10ECE000BFA165AE7BC2ECB09C2C1EC79D19EF2F57
-:10ECF000457EB4013FA23E6E34F9ACF86E8A922A8A
-:10ED0000505CB50DCADFA0F24CB5DC33F56ADA977A
-:10ED10000912CEAB3E77F6D462D46BAE04D207B6FE
-:10ED2000BC29A573A13C20992524AF8AACB2BB11A4
-:10ED30004ECF889E0AE4BF671C0E09E3B14056928D
-:10ED40003E10F39C149F6551EF3B658EE17ABE67E0
-:10ED50005FEE56FD026E1EDFD31CDB715311B48BC8
-:10ED600079509014E8BFF1FE0D25189FB8F5FE7795
-:10ED7000FE84F1AD4DC922BD33B0BB3AE4C57ADDA6
-:10ED800006D6B11DECC83595D33B703FBA86C93263
-:10ED9000DAEBBB0DD3FDA89FBB9344B65DE6BFEF96
-:10EDA000101EAFEA28D0C74B6594EBF36BB37C0F12
-:10EDB000BAC7633C5061118E936490657C3AB8B0D9
-:10EDC00083517C7E726EAE8471DD71851171B0935A
-:10EDD000F5FD244CD1973BA745C46DDDA22FC7DFBD
-:10EDE0004F08CFE3EF4484E74F223D523C093F7F79
-:10EDF00088E145009F2718EAE9C6AF87503C2BC23F
-:10EE000011EDF69861A207CF4532CD1D33300E8E3D
-:10EE10008D88217BE9A03B86C990B72C66244F2DB5
-:10EE200009C103B85FB5085289421A2A78E0AF5089
-:10EE30006E87FD2ACADF48F8656672FFA043FD3D74
-:10EE4000B0A018223BC2F6C010A9DA835BC7083F06
-:10EE50006C79589EC77B6F77ABE7282E2D4E8DF0CF
-:10EE60000A2B43BC4D62017C8732F3FE134A08E64D
-:10EE7000B146CEAD403B6395D049E328650E1FEE09
-:10EE8000BB9330CEDB88F1DE0AA591F8D8E3E6F635
-:10EE90009FCC66FB118FAE9902C58FD41F8AA9C380
-:10EEA000C3977AF5BD062D8E4DA3CB97DCDCFEDC37
-:10EEB000D32E085EF483DF91BB1DF1ADE55B7C4E84
-:10EEC000FA1DCECC31159D4897EC7A6E87821EA034
-:10EED0007BD95A9C981657F85196999FE767093D38
-:10EEE000F80B6971446171E0747467C4A30BBF844B
-:10EEF000E73D99634A2494338F68F72F18EF179FE3
-:10EF00002FA473836982F722D59F8E765DA23A5E25
-:10EF1000A253F4D2FBEE302701EA3FCA78FDC4DCED
-:10EF2000BDCBF1DED51E241CE49F7B389C23E93643
-:10EF3000B5DD5F320AE165007D98D1978E0DEE1642
-:10EF40003A0FAC7F902558C6F4A5EBF1466EFF74DE
-:10EF5000CF9729CE72303AFFC41DCFFDD8499B24EC
-:10EF6000B46FD3721FADA67B300F3209F55D5A7BAB
-:10EF7000C74DE8F78AE487803D6E2C8F93FB6E7E49
-:10EF800078A391F3074B11096F91F1A591F1A43981
-:10EF900059F1AA9F02F4402CDE0790AEC038C1EEB2
-:10EFA0000718BD1350FC62F36DBF83FEBECC334B1C
-:10EFB00028AFB3DEF23D6987797DF94B5F16CAE968
-:10EFC0006D62A72D3ECCEF290AFCFE59A4BCCEC928
-:10EFD000E27427A3DE70FDF36926D2F710FC7DBE34
-:10EFE000E4919284FDAEFFA335E9FFD06E61563FF8
-:10EFF000DA2DEE762D9F417658D65B3C7F893B63B8
-:10F000009D928B702B277FD1C1CC39E42F12DFE387
-:10F01000FEA251466F00F3EC7D1BC5DDEDDC77C72A
-:10F020003C8C57AB4FBE5646FD3C4EDDFF8CC9D2E3
-:10F03000F85BBF7ED1ECF521DF447E1F99A5C59515
-:10F04000947C3213F037EA7133C5DDE50B65F47B50
-:10F050009CDD8D46C26799515EBC3A6C9FD6945C2C
-:10F06000549495C47F97D8071B06F9BC81F980D9C1
-:10F07000DCCE634548AF59C066285FB2146E406667
-:10F0800055C6305F189DCAE745AADF94EC2DCAE249
-:10F09000710874EE635259FA9984123613F5327C72
-:10F0A00043BD6BDA15C3CF7B9CFAFB9146238F17C8
-:10F0B000B9415DBF09CF75C6E27B6F42C832BA6FF6
-:10F0C000FD9BD57AA2D511320E413FD91B47E8DE10
-:10F0D00065C43930EE6F292EA79C911F14E142F9C7
-:10F0E0007B25FE6E77258F07A85DC10C781650AB87
-:10F0F000DE5351EEE2BF4FCCBC5E19DF57A12DA607
-:10F100008CFF0B11FFBAAC2C01EBA7B20E8A636423
-:10F11000ED4CE6F112FA73A76DFDBC03A5F901C42D
-:10F120004A23ED5346BE66A3714D958CDE09A73781
-:10F130009B70FFBB82054443AF1FEEED4C99DA692B
-:10F14000E7B1BBBFF9200DE572BEB0DDF706D90D02
-:10F15000B1D276D48F317A3ED4EEAFD5A874B2ADA9
-:10F160004A227C6BE56EE518C5DB67B1EE6ADC67A9
-:10F17000655526E8F0DCE3973D9FCE7CE3C2FB0DAE
-:10F1800070BECE15E99D2EF9BC9BCAB755C983F454
-:10F190009FD34FFFA9444FFDF79F41E5ADA12FE25B
-:10F1A0006F00506CEB3E115F22F7DAAD917076AFD5
-:10F1B000D0CBEF8BF747C69373B8D84C5EE74D00C2
-:10F1C00037DB4382A78DE1EFDEE8EB4DCD3E17CF75
-:10F1D000CFCBB5FA21E7CD581FF6BD6D32FE8E8E2E
-:10F1E000BE7E49D147F1FCDC5DABCFE7F7C3F3FA54
-:10F1F0007A91F8899C2FCC2BE94761F3BAC26AD186
-:10F200009597CEEC33AFA45BC3E675B54B5FDF5784
-:10F210001D7D5ED7E55B069C9756EFC68917562F76
-:10F22000721D374FB5F403775EFFD6D20BEBF7F6BE
-:10F230007903D7BBBB32721C85DF53377BDF46397E
-:10F2400057C6E495F84E3873C4448D0B2E52F9E33B
-:10F25000EFE8A748C27800EF516CF779268F4B3959
-:10F26000FCEC023F9EC32CDB6796F1BC2353F55B9D
-:10F2700083E05988FCBBC72AC5633CA0C52DABFB06
-:10F28000AB8E6C8CE7DBB3F39DDB48EE31BD3DC349
-:10F2900098A708F5358830BA97F1276C97141E4760
-:10F2A000E125FBAF5EF0FC99F6553FE6FB2A2D7E8B
-:10F2B0003FDCCE62137AED2C2D7E7BBD3ACE3759E2
-:10F2C000DC1F08763EFD3E6A72AE48F1CD8F583B9A
-:10F2D000D6E3FDA3479CCE78DCCFFC469DB76637CE
-:10F2E0006AF71A5266E68E3146819796FE0F29DC40
-:10F2F000A2280080000000001F8B08000000000012
-:10F30000000BDD7D0B7814559AE8A9AEEA57D2DDE3
-:10F31000A90E9D178F509D7720840A8418909126FE
-:10F3200009195486E9A022E80C360908485E181F1E
-:10F330006165C7CA431E51C7384604046CA228BE83
-:10F34000669A59D488C16DA3C3E82E8E61D7191D62
-:10F35000C7CBB6C05506105ADD41BDABC33DFF7FDC
-:10F36000AA92EE4AB7C2E8CEDDEF663EA73875EA4C
-:10F37000BCFEF3BFFFFF9CBE2B81AC0C1411FCE361
-:10F380004A0971E6E4F476B9091957E215A7D0F7EE
-:10F39000BFCD3410328D900DF44168BD9227F877BF
-:10F3A00073F4DF2221EBCBE8F7D0308B9007C44118
-:10F3B000A740EB1F7009A2C2413B09DBED7DCD6088
-:10F3C000F0B80879E82739BDBC7BB8BCC5E7DA05D9
-:10F3D000E57106E20BD8A0137135A1EFF75A446727
-:10F3E00057092D0A83EE1A3B2DEFF9C3759C8390C4
-:10F3F000CCF1F45D0A2175AD95E4D854429E378571
-:10F400005F3D0FF3D9CCF977D37E5EE829A9166862
-:10F41000FBE52708B1D24FEBD65EF5C0F151844C25
-:10F420003F2ECE86F775DB9D324FDF370E3657C342
-:10F4300038A499C8B9322169FC6CDE4EFB49BBFB8C
-:10F44000B0DC41A7FCE080D417A2E5F02E4EEE958B
-:10F45000A07E4DC91A808FCD23D9E87A97C254F186
-:10F46000BDB3DA08EDAE32C99DB49FD346B208E011
-:10F47000781EFE660D3F97FE442A2774FE4B036BF1
-:10F4800097E2B8220559062D5B449C87451293DB11
-:10F4900068392D8158AC5308296B170FDE01E3AF93
-:10F4A000B28BBD14C68E72F1E0C3B0AEE64C91973C
-:10F4B00061703FC255EB7FB9C76B2274DC897B4C0E
-:10F4C000B433B68FE7E97F9302D1E5C97DD1E592E8
-:10F4D000607479EAEBD1E57D1283F70CCB981DC7F8
-:10F4E00029BC070E9809CC77F5A904BF99C27BBF48
-:10F4F000911058BFF2AC19F1A172B5CD03F871EAC1
-:10F5000064C22E332DBFF25E027E7FD3D356F6BD8A
-:10F5100021F04B282BBF4C24F0FDEA5181B2643A14
-:10F52000EF97BEE66FF016B16519A1FF5F16EEEA20
-:10F5300082FAA9813291BE7F7E022183502FF88BFF
-:10F54000619DCFFF95C77EC34F9AFDBDB4DF532F9A
-:10F550003EF14B80D7A927C7247374CE971A7AA798
-:10F5600076417D9B5DEAA5EF679C7A26DB17B12F7C
-:10F57000ABF798A3D6D92C71B8CE56C1D3FE28ECE0
-:10F58000CF2123E253CB727F5D90B66FE1326505E8
-:10F59000FA31513C2D82B29CE6A4F83AC3C1F0B6D0
-:10F5A000C54ACB31F65D7BD66EE1896FEA70F9E82A
-:10F5B000A627703E0527DE45BCDE6F540C0900C748
-:10F5C0004D9CBC9BCE7FBFD5514C92E099E907BCC6
-:10F5D000B95332E0FCE8BA1E6E04BC7893977B49BD
-:10F5E000FCF10AD2FFB4BD6AEA37D4D371DDC58419
-:10F5F0009CFD73C20D1E3A8FFC2DD1FB5EE88F2E51
-:10F600006F00F8507CAB2511EFDD309FACF5E94879
-:10F610002704E75370E2FDEBDC74BEA3CDA419E030
-:10F62000A21FB75B627CE4A9A7683F05D80D7F9E47
-:10F6300067FD49A9745F54BA7A89637444FF6E19EF
-:10F6400043E96D35C7F88BF67EB56E1E5AFFD3D5EC
-:10F65000FE5D26F9BE10EEBF5984FD3F79E7DC0759
-:10F660008E1B47CEE7C33B3D9EAA88F7376E597382
-:10F670003083B6ABDF9B32858F806FFD93AFA65E84
-:10F680004FDF9FDE23C8C002EB173FFEF319F0DD0A
-:10F69000937C00E60BF51EBADED381DF38E0BB1B9E
-:10F6A000B73BA7F0D270FB155BE678AA0A86E17932
-:10F6B000B174FA4239E373AB0346BF05E822F0FBAD
-:10F6C000EA3180A75B3839978E5326F878A03B7BC8
-:10F6D000A9C7A84C2764D657FF7C7034AD6F3A3069
-:10F6E000ADAC8BD67719BC57FD08E86E272FEFA677
-:10F6F000CD9E7BFBE6545FC4FEFC56C5FFAE85F590
-:10F70000D88F4271239732F58182DA4A28CF282296
-:10F710009C99F263C709E2F1DB603CF2AE2199905B
-:10F7200013FD77150B06E447D7039D9C220E19E8BD
-:10F730006EBFBDF9DF71BC678D38DEAC601207FCAF
-:10F7400077FF639CDC45001ED1F477E244BB63364F
-:10F75000A3EB1BBC28070CC445FB5BF9E824E403BE
-:10F76000DA7BFDFEADF247F7A3C78B132ADE026AF0
-:10F7700046E297FEBB51F31413D0637D2B9517110E
-:10F7800074537FBCDB446C23C72164087F09E02FDE
-:10F79000C54B22E17AADC837E81F67A1787B12FE1E
-:10F7A00095CDCA848E7F13874B23AB2704F280CF7D
-:10F7B000718258D19931CC5F49B91FF9FC69FACFF0
-:10F7C0002E19F842E008D03BC8D2DD205FC4E09992
-:10F7D0006D50AF8CF7003F1A0D484A9FE45789C817
-:10F7E0007F4F4BA1C7B1FD33936485BE3E0BF462DE
-:10F7F000C3768EE408FED41678D511A2E5537B4774
-:10F8000055F00EC0DB7F75C03A4F064655981CF187
-:10F81000F9869E6FD29921DE7C00FFA47897E4F6EA
-:10F8200024B869997452A10BF26C547349738C7D9E
-:10F83000D3DAB94CCD2512F08F9FDA64E0E3C99694
-:10F84000BA47405EC39F87BEFFF4F551BDB0FFBF0E
-:10F8500050E5EA528E8DA3F533DACDE8FDF557F287
-:10F860009242749C4F899404F2E2E96CEF38377D40
-:10F870009F5E31E8E1293CD2AF2072076D7A8C9708
-:10F880006F13E97E2C23545EC2B3D46702BE423AA2
-:10F890005370BE84C8D500CF15F328FC4B5819E42B
-:10F8A000DB2AAF49EEA272B84E60F0AEDBC3F93B83
-:10F8B000E85C96DD130D8F1B7BCCC37801FFB73D51
-:10F8C000A29E8EB34AF0AF07B935968A9C51E514D3
-:10F8D0001F1E8BFE7E3509E2BCEA9F396F8E05E75D
-:10F8E000BFA8707E3ADB7309AC8F5B60C1F9B43C92
-:10F8F000CBA17C759902A84F84D7507E4CE74BDE94
-:10F9000066FB709DAA2F35AD5DEA59469F675BEB9C
-:10F910003CCB6815921AF0919E24C49FD5558183E3
-:10F92000C85788F8EBEBD3A13FE211A1BCD9CEF4C4
-:10F930003DF2D8ABC057FE42C400E0E18C951CB646
-:10F940009FF136DF4B319C5C37B47F5E8463BD44EE
-:10F950004480E37B462FAE5B5945C4DD94AFD45B56
-:10F96000BC9AFE25FE90AEE746D28CEB5EE8CEC296
-:10F97000FD5C49BAB1DC404226C2C3FE962501BEF9
-:10F980007E4664DC5FAA27116BF248BC02F87B223A
-:10F99000E0B6727B74993C1651CE0238D37204FCE7
-:10F9A0001BF79D377B62C0FDC12179E42FAC991410
-:10F9B00089C76D38DF23EABE3C78CD8D19C047EE8C
-:10F9C000038578B4DA4139F05FFAAF19580E5A68F6
-:10F9D000FF095387CA585FD6CECA2DEE17BD5B28E4
-:10F9E000726C36FA3244BA3975BCF7A081C27561BF
-:10F9F0008EEF76D8EF3A832753407EE2C9F3D2796F
-:10FA00009056B6BF0F4D692E6C8EA17F68F3DFCC88
-:10FA1000058206E0232F32FDC25E1A3646F2FFFB56
-:10FA2000DD8C4F260D8470FFC3CF7104F4DEADDC96
-:10FA3000FD19B08F5B3324AE83AEA9745FDB6CE439
-:10FA4000379417E5D27D6DD8F7C1C131B45C3A77F0
-:10FA500010B689AEDBBBE63740CFD31298DE9CD818
-:10FA6000BCCB40FB4BBBA1604A07C5CFCD6E09E7BD
-:10FA70009330B5FB15E827BC46127B693FE9ED8A58
-:10FA8000FBE62218BFB90DF1B786E0FB946BD7B542
-:10FA9000C177778F26C93C7C47DA38F8EE410741B9
-:10FAA0007D31C5C0DF5003E529AC9CBC8EF3F42248
-:10FAB00052DF8FE3A499C95C2E99BDF71721297AEB
-:10FAC000F662BD1FD79B56D95C02FDA565B3A7CBD7
-:10FAD000E433E4D0F10E1D36FADBE97C0FA9FB7E9E
-:10FAE000CBAE8AB448FE79E8B4453050FDEC50BA4C
-:10FAF000A697066DA097DE52529906449595333726
-:10FB000009F6C795195D7FD6E8499A0A7470982757
-:10FB1000B00FFF69F324811E79A989CD5FBF7FFFF4
-:10FB2000ACEE4BD3171CF147C8A5A645E750DF6FD5
-:10FB3000FA42887A7FFA4E0B01513524BF560E5493
-:10FB4000C3770D64703DE053432091F823F0FBD25E
-:10FB500084D8E36A78DDF4054F9498E39AA2DF7FB6
-:10FB6000318A28A3627D971AFD9EAE23AADCF7F99D
-:10FB7000D03AE03D290F39BCD4DE9B07F29096CFF6
-:10FB8000FA0D8A7132A8E34C8E9D11430ED0B3A9B1
-:10FB9000DC6B867D39238550AE9D25642ED45F6A4B
-:10FBA00030DC5003FB2B841D0BECC3E368F5D03E27
-:10FBB000721FCF2C329120EE4F18E701F053F2095B
-:10FBC000D9D6FF8949027DA0FF15849F862F9170A9
-:10FBD0005422F8466AC760D040E9E3FFB8BFEA2E76
-:10FBE0002AA4A837A0D1F75FBB3D33693D6F88A237
-:10FBF000F7C4D221FA4776F3A08157F9C5F9EEAAE6
-:10FC0000999165F67D44FB9A2ACA1F4A8B587B213D
-:10FC10008B3BDC9E03AFBB999E238433017E4365FF
-:10FC20008BAE6CA3E54911655157EFD2D5A7EBCA4E
-:10FC300063D9F7A7EDC14CB04393B28C3502E57B95
-:10FC4000A733824B385ABEA7C35C5345CB0DA54C96
-:10FC5000EE36F673328A0D157E8D32D31F6D72C863
-:10FC600054570470183C08FCA1BE8F13394A0FB6D4
-:10FC7000C0DE2096A19D14D12EC061BBFAC007D86A
-:10FC80002E6EFF0506A4F3AE82A3ECBBC04728DFAF
-:10FC90003774AEF102837AC3C8F88F407C9E3194EA
-:10FCA000BE1BFB6A88CF36CC27CF64785E453E7991
-:10FCB0008013813E87F014FAB50DD385F6FD9F269B
-:10FCC000F5FF1ED487C45B3E6913E8F7FFABE1A3E1
-:10FCD00069A0DFFD4995079B397F218CBB8DF80A10
-:10FCE000419EFDB421F71503FDEE8831B40378E899
-:10FCF0008FB3C6D508947F1FB187C671545ED76491
-:10FD000015B0724A6807C0F3C9AC42561E171A678D
-:10FD1000A0E56B7AAF46781FC90DED80F2CF7A6708
-:10FD2000B1FA49A1713C6D9FAD7810FEBBC5D87486
-:10FD30003D278BF1136D7EFF36D5E3C982F5D433B1
-:10FD400039B2E4A6F71603FF5D622022A1FC76F724
-:10FD5000E963CFEEA6F0D8DD9A487A193A7A05AA77
-:10FD6000D7A631D4A7FCBE1BF973D84DF9353A811B
-:10FD70000643E03F4A9C6691BADCC3FBA28D9F36E6
-:10FD8000A1792FF49FB6A408E581C5ED790AC6D7FD
-:10FD90009E6F15B2E7535922E3DFBCC183DFDF61F9
-:10FDA000F7C3F7F759D9BA28FDE03EDBD47DB95E39
-:10FDB0005DD7F5594C1F9CE69EF354560AE823AADA
-:10FDC0005EBD31903281CEAB872301B04FDE33125E
-:10FDD000C58AFA4802EA353D3077A8BF3FC3AFD0A5
-:10FDE00071AEE78817F88BC64F7A9C9E8CE408FBAF
-:10FDF000A4A784966DC3F6684F8D2723C105CF5401
-:10FE000003E8EA1A7FEA71B3769A7C4AEB60E3A4CE
-:10FE1000DD57D80BEB491408FA4B962FCAEB6D430C
-:10FE200039BF00E74D3C9E0C8EF6777C559601E07D
-:10FE3000A8EDD767533DB7017CAEE3997DADED9B4F
-:10FE400006DFA7B2989FA08EA77A02C5BBE21C1F4F
-:10FE5000C293EA0DC528A055BDE12940DA08381340
-:10FE600021340DDEFF7F08AFED8807DF115E0DAD99
-:10FE7000948F182E808FA870DCCC058D698C8FA094
-:10FE8000FD0BEF411EAD73FB025911F4B0E48E0679
-:10FE9000D417B57925DEFEC2DC6B09D0E149A4BBDD
-:10FEA00025FF9088F6AA5E9FD3EC244DEFFC451CFD
-:10FEB000BFE3CBEAFA64CDBFAACE23B128F4ECBDF0
-:10FEC000145EC9C42E021F3D620A4D9269FB2306CF
-:10FED000DFA32FC0BC47F322E52123FABB2D9B47AC
-:10FEE000BCB16A7842C28E09AE613CD944F1C40209
-:10FEF000ED6B4C6807F738FD5B6F043CB966ACAC42
-:10FF0000482887919E95D644ACBFD4709480BF3862
-:10FF10003C5D14415FA47885F53D8BF3FC0AB3FB8F
-:10FF2000152BFA4113FCBD8077251400D0DFE209C0
-:10FF3000580F7637FA2B165BD87823F18AD9C7F990
-:10FF400084D5BB55BC5D9585789BDA4198BF41F05F
-:10FF500014D744E80B85D90C6E89A5A1E7DE013BD7
-:10FF6000E51EAB9C4B9829077E0CD29D86FD517CEB
-:10FF70003995C5FC0B8897CB7E6EDFC5F89E5C0675
-:10FF800070DE60EF266BD10F65C4F96FB706519F25
-:10FF900036582427F87B97F064731EF4D761140158
-:10FFA0004FF4F0B667C7F34B866E8DF44B2E312BB2
-:10FFB000E64CA8BFD38AFABDE69F5C92C4E84AF338
-:10FFC0004F027DC6920B9A7FF20615AF46D4777D1D
-:10FFD000995B4BFBFB0F15CFE4812F7297DAD8BAF0
-:10FFE000C1CF510BFFA2E3D6AEB37E00FECC5AC503
-:10FFF00018343B808FCCF18422EC2DB285ADC3F751
-:020000023000CC
-:10000000A6D10F706A15C8E6C7617F14B6FE96E5E3
-:10001000FE5591EBDA6662EB52FEC11EB5AE6D0E77
-:1000200016AFF8EEEBFAF3B4E8759D98A6AE8B58D0
-:1000300052693B55CEDDD06AFF802BA64F58177D05
-:100040009275745D05C3EB9A93CDF8E912958F8D87
-:1000500090BB71F7F17FC87ABB1FF2C45AAF7E9D87
-:100060004F677BAAB353906E8262E9305EFBB6D2D3
-:100070007595C2BEA6F8DB705F197E12E290818F83
-:10008000B52CA7EB82675B1AFAA59698A53EF0CF30
-:10009000928793D47512E4032D5BC7215D52BC6532
-:1000A00074FB108BEBB45899BFA0658D282B22AC44
-:1000B000FFD768CF86297F45BDA4359AAF7F3B1C0B
-:1000C000AC99B5459170B0642E2D8AB1EF8A19F1C3
-:1000D00039DEBEFF071FBE95CB8EEF2F23EBA2FDAF
-:1000E0000DE0371C2AF323CB7AFF05B51FCCD1DFF7
-:1000F0002BF1F8C14F23F1E88851C5A3B556943FC1
-:100100001A1E1DB1B3F5EAF188502D1AE8585BB7F5
-:100110001E8E4B008E31E209149F72018E4754FBF4
-:100120008CE2532EC051A3831B5A193FD0C3ED89D3
-:10013000F87CEDBBAD4387C7DF751D5A7DBC756884
-:10014000FAED166ECD56C0CF2D1944EC403D383433
-:1001500009EC2497C95F08F3DA66A2F44BFBAD55AE
-:10016000C707CD01F0FBB343CCBF79541D573FAF58
-:10017000E75539A4F77F3539C23B410F694A60F230
-:10018000F0CC013BD20DC9092D01FDFBEC7E330102
-:10019000FEDAC885F2E0BB339C67297ED7962881BA
-:1001A0005CD4FC86C79E677E438550FB17FC753E7A
-:1001B000E6F76C52FE753DECC3F96CA119ECCFA6C5
-:1001C000BE683F195D9F03D67BC64006E1FB46DE55
-:1001D000BF0A4CD6CD26A60F6C369000ECDFB05D82
-:1001E0007E340FED840C91805FA7D1F041DECD11FC
-:1001F000767CA35ADF98C9FC4C1057467F390CE532
-:100200001E0997C67B4E7D0D71B1C67D7A7A89A68F
-:10021000A7FAE132779E83FE22EADDC3F484F63842
-:10022000E06115F1E772E01F63E5C4B9837E884F92
-:1002300037A9FED394815035E80BF6D200013EDA9F
-:100240007482D92133FA77BD0A7E33E7DCC171A00D
-:100250009234A97104BDFD33BDFF7E1EFC439AFD9F
-:1002600012E18F2A5C10E5576CC776E0DF82F1421D
-:10027000F00AFCD302D37337AB7A2ED587916F2E59
-:10028000EFCE477D18F455D03B34FF18E821A08FFE
-:100290002ECCA91072E83ABFCCA9380FFC1BC6437C
-:1002A000BB1F9C2ED3BF817FA9F0D1BE033FD9379E
-:1002B000FBF3993E3543E7C7BFF98D14C4F3FD71D5
-:1002C000F4D45139437EFC34F0E3DFCC496980E754
-:1002D0001FF23EF4D7AF200AFA8157817F1CF960E4
-:1002E00010FDCB373513B90BE3E1BEF5506E58491D
-:1002F000C42EF02F57F9B01EFCCB574E67F12629BC
-:10030000027F219E1359267B68398A4F0FA2BFBAFC
-:1003100091F6B04D063F42F4F74DC45F29005EF4FC
-:100320009D3747F5D3C3E074838A2F5BADCC4F3D37
-:1003300063DD2E9E44F81992A678DC77013DBC61FE
-:10034000443FE9FF56F75783C7D3D915D61C0A8F08
-:1003500004F0FBC077779951CE1E379095802FF728
-:1003600039C90D0BC09F7527F1E418012FC4CC4883
-:100370007F97F6ECDA6F5D0978362B87F111EDFD8A
-:10038000996C2396D1EF8CFA6922C6D1295B2A0693
-:100390003C2CCBD2F462520CFEEE0F54FED4B8D0FB
-:1003A000E683FE4206C6CFE6E530BB7B5E8E09FBE8
-:1003B000D3CA43FE2215CFE838D85FC2541215C7FE
-:1003C000BB2A87C901CD5F4BD4F8CAE655094C8FCB
-:1003D0001EC27703F2B3C422AFC987FCA402F95945
-:1003E000F8CF3609E032F754FD2A58C7A78B120818
-:1003F000E41D2C53E3448D394EEC578B0BC5D0BF15
-:10040000AE0FBA86E58D869F9A9CD96F67EBBED8F2
-:10041000F8BEFE39B7AB10F9B7368F193ABD241EB6
-:100420005DDC364C1751F12D0AD744E0B3FB0DCCFF
-:10043000EEDA4F110BFD560135FE48ED649003FBDB
-:10044000F7E5A39EBD54F5A7523989F65598CA0B16
-:10045000B6DFBEADCBE1BB402EC6653F30FA9F7C18
-:100460001CE4ED01664768FBB17FFF183FD0EF8CBD
-:10047000535F6502FCF79F786A0CC4BBF7ABF1C50C
-:100480007A53300FED7D13D353EB1DC13C80DF4B0E
-:100490002ADED427D0327D9F95E2EB063EA4E50705
-:1004A000403B27AE477280BFE1986A471EA576257C
-:1004B000CC8B52CB20C43DE97E674039BC298DE905
-:1004C0007B745E8017C70E4CC2F56D36323C565EAB
-:1004D000E4D03F71D418FEB0957E7F34632A69134F
-:1004E00041DE7DF1F841E87F274FCC22E45F7C7E3E
-:1004F000AE8F7E7F96DAB9E037AB3378AB33805F6F
-:100500003CCFEC75FD3E80FC8B8CC79D21E14CF40B
-:10051000EBADCC0A00FE9CE92FC4BC22E21289425A
-:10052000CB4D2F32FB461F273E6E8CC67F7DBFB062
-:100530002EF0AF35C1BF41BE47B68FD1DFB795CFE3
-:100540001843796B293CAA245F302785B163D8CF43
-:10055000A69733901F1FBBF773DC4FD2CDE29FC726
-:100560008D9E25303F6755D0541B818FEFA8FCA38B
-:10057000CECCE435E5BFA6487EA3D59755909871BB
-:10058000FA3FA87CC13EC8E4DEC87A86E7B7924746
-:1005900079E017EFE448D8DF7835DFE056F2D92B61
-:1005A00066D04F022598CF307E5D10F9009D2FE276
-:1005B000E7F1AD49C81FC93D0C5F6F7CD88CFCE3E7
-:1005C000462A3F98BDCDF2ABC83D2C8FE2C3BBDCC1
-:1005D00088CF65EDC132A4072791412F79A1F3039C
-:1005E00085A7F54BF77025903FB6B4D38D76CA4DED
-:1005F000FBDCB8BF3354BE5E67F660BE187984C5B5
-:10060000D396FD62158ED390489C3CEA7F7E13C83A
-:10061000E5957B3802743523C0F87FBD107C05F466
-:10062000487DFE03F147C789411E91083D13E40F41
-:10063000D1D905D1FBAE5C94FCD5CB1B3E37B6FCC3
-:10064000A5F69E90CBF695C989BD1CE31BAAFC6D4F
-:1006500000F90BBA9A2AF734B9B942959B1FF24CAC
-:100660006EDF68BE1F9F19B96E1CE72688EB621CFF
-:10067000336C02FD241E5E64E432BCD2F062746E00
-:10068000345ED49F081E34A39D293F0FF1EAFA750A
-:100690002468A776DA8D4233CA87D1221131AFAEF2
-:1006A000D287F34A6BA1FA39DDE71B21063BE5E26D
-:1006B000F582117A804EFE6BF3D6F044AFFFCD5831
-:1006C000E7E7219E74328FE07BED29924009CCB799
-:1006D000C6C2F4EF1A8B2DC883BD59653C1D696FE6
-:1006E000FC58F094E5A25C1DEBFC7022B20802FD00
-:1006F0004E737B664D9836AC57269686D7DF4BFBFC
-:1007000033926203F0496D7C8B7BF692220ABF26FE
-:100710006110ED15924EC4DD74BC2B8B249C4722D6
-:10072000DD875D14AE464141F8192DA2B3CD09FB1A
-:100730003F887199700A413F9DB65F3BEC44817CD4
-:10074000C52B8B187D5F5924E293B6C738AEB180B4
-:10075000B6A7FD57ECB7225D9E7BD1EE07F94CE5BD
-:10076000CE7827AD4FFD13B55368F9CC7E3BEA290F
-:10077000675479E1D2FCB5643DEEF722156F14524F
-:100780003106EC11C25D3186CE9D687A7283335E8C
-:100790001C53AD770F2E64F86B467DE19C33741BC0
-:1007A00094E97C30B7C69BCBD6DFB4AFB2E40EE0A1
-:1007B000DF5E9BCCA0EE2B01FDC7CCDFB2D0428127
-:1007C0005DCDAF0BAF05BC1F6713CDB449D5F8F7AE
-:1007D000FFB09896FFBCCF48CC803FBBAF4A0A42DF
-:1007E00033C193EE9D34723EABFCC6A3A1083A5EC2
-:1007F000BD27BADC10882E3711E1682882FFB7BE0A
-:10080000BFEAADD722F06D6DAEDD05784024229FA2
-:10081000A7F474FCCE3E720C6421FF9324E08FCBCE
-:1008200028F9C7D22B3EBF73E55BAFD1EFACA68AE8
-:10083000B65C940B9209E8AB96EA0DB1ECD0C9B95D
-:100840004C4F339B9B4FECA2F031BF6496DB68ABFF
-:1008500079B9BE2EC0C74643F820ECAB79FCE962FB
-:10086000F067578CFF0AF302CEFD2391014EE7ACEF
-:10087000B3119FCE6DB54A60A7F664DA981FF6658E
-:10088000CECF31BB65FEB454C8FBC0B5503E165E3A
-:10089000BF15F8F474B3D82EE2722D06DC6F6ABD72
-:1008A000D1678F49590F7ED51E6A40B6C960E70DE2
-:1008B0003A80180655FED0C43F63B2D07FBA3B3DA4
-:1008C000856DF4BBD5DE0402F978C2D78217F06CCF
-:1008D00003741561F73CAEF2BF46F1EDF5307ED3FF
-:1008E00057B7CC4D310CFBF9CD46E6E737F6CD0EC8
-:1008F0008EA14D57B456A27D47F92DE38B07185FA3
-:100900005CB17636BEE716CCC5F57E48D70B70795C
-:1009100075AB19D7FBE1381BDADB1FEEE0B0BC4248
-:1009200034613E1FD54F46CD76C17BA3682623E1B7
-:10093000D1B465C3FAADB4FE77193CE128FE7FB4AB
-:10094000FDB7188FF888B0F1957D3CEA3D1F89E12D
-:10095000B220C0536A7644DA932B76F05EE0972B90
-:1009600076DCFABBE900B705D795023C66396F49DA
-:10097000956CC3F59ABE2724973F0E7439EBEBCAEA
-:10098000C159A077EDA07443E72D18880FEC8FD7DD
-:1009900076FC10F5ED1535094E589FB47D7735C8B6
-:1009A000B78F6A461B705DCF72440478385B53E1A1
-:1009B000FD0A4EF0C6C2AB65B92C9E307BBC4D061D
-:1009C0007FC38ADFF3882F94CE16421CA161871162
-:1009D000F5F9D716BCF787C5AE613AE3166C993FB7
-:1009E00003BE7FC288DF0FE953DB3F7E1FFC02F0AE
-:1009F00047253BC821849F9EEECCE3D7E5C1BCF4DC
-:100A0000F4B7A2BD398FC5F72F8E0EC9764687275A
-:100A1000299D9C37FC4D74F829E3EB174687646CDD
-:100A20007294FC1EC9F714FC4E8B8F5A64E2D96D88
-:100A3000C37C180F47F9F5983C01E13E268FD96D2C
-:100A4000C29737EF7993C26947AE4FC8A3EFC71378
-:100A50004F09C867292C56802BD6A6EA8D643BCB5C
-:100A6000F306FB02F67F730A79BC2BC23F93A6F60E
-:100A700047F9821DFA39F3C7AF0EC27E35669E2E46
-:100A800006BDBAE98BFFC4BC0A5B3FCBC7B1C961E5
-:100A9000CC3732BABC888F1ADF6F92991CD2AFABB9
-:100AA0003D8FD9AD4DAE30F6F3423EA34F2D1EB96A
-:100AB000AD3501E342DB5C7E2BF3B3507D8FF63F17
-:100AC000AF94473E6329ED2020C748398FF19C59E8
-:100AD0005FBD4520FEF5BB999532E895B6D25785A6
-:100AE00051B0CE72A35AFFAB8D59B4FEAD9973D0FD
-:100AF0003EBA399D9740AF9A579AADA0FCF4B0FC2E
-:100B0000DB595F25211DCE5F351FF54A6DBE5E6244
-:100B1000916C144F1650628DCC539E3FD32AD9222C
-:100B2000F0EBD36E6E2ED3ABA5A4AB2731BF50A094
-:100B300088C9F34838DC9C6EC2F1BFCC997D09C0EE
-:100B400077D6656C1F4E3E6BF6B7D3714F5A63DB99
-:100B500091D5790C6FB284CB912FDDF2AC19E3F310
-:100B6000A7B8D8DFDFB491C7BCA2551B39E2A7E311
-:100B70009D7CF2854CE0EB7FDEFD42666DC47CE23D
-:100B8000B5AFCB63FAC0487B3BB82CD2DE9E676220
-:100B9000710132C51CE5DF9DE750F3EC2F30DEF12B
-:100BA000A3B87EFE37C6C27CDF1CF2F3BF3E3632EE
-:100BB000DE3114B792999F5F1FAFCA29FF1775BE28
-:100BC0002CAFB95550E72B9B59DC62398B8BB71C86
-:100BD00018857837CF14FE39C6B35EE64535AEE1E9
-:100BE000B160FB74561F675DC4E3C97195A1BF096D
-:100BF000E7C3F57141BBE33BAC8FB038867E7DB572
-:100C0000FD7CCCB8DC97F92C0F20B1288C76D5D19F
-:100C1000D71F85C8FB10BE5BFBDD86C87CF8217D35
-:100C200056C5EFAB00BFE9FAAC1B59391E5EC7E3EE
-:100C300057A9798C8E35FC3EBA313B09F0ED2E4B2D
-:100C400063E820859F874F22D6D1B4ACC6FF95F7C5
-:100C5000593E2A1F61E7001DEC78DF8E764E87B182
-:100C6000F91138BFA3B40964377DEF4A68F4B7D1EE
-:100C7000B264B463DED4ED09F377815D17A20A2E66
-:100C800047CB9F271CD9057A02B12411231D47A900
-:100C900050DB9B2C6207D52F1E4A74207F695D466E
-:100CA000507EA79120C75180ECCF63F9AA29AB9F52
-:100CB000E7308F98523CE87D72766C7DF4572A5D60
-:100CC000BC0B0934F42957C6FE6E7F9EE617137CD1
-:100CD000A1083B6F03274BC877E85FDB74D0EF07B1
-:100CE00017235FA67AFC5B541E8CE17F8DFED963CF
-:100CF00077FA1E8975DE6148EE56C6B6D35F55E7B2
-:100D000057D0CDF98D0EA45FC3AE28FA55E378F61F
-:100D100054994A1888DFB2385D0ED1F2DEB780DF11
-:100D20007E74399BA3C31322A05FA4775F4E7CA37C
-:100D3000809E66A4817C6B591EED4F4BAFDD988180
-:100D40007EBDDADBE683FCDE62B46DE492E019ED91
-:100D50008FDBA2F3C77D1B5F488F4B37D3D3C1BF57
-:100D6000B16538FE87F8D3B154F4F31CAE8244C6A3
-:100D7000B5533BA4833ED083665BE45E7924FD904B
-:100D800072391DFD9CF9EABEA9F4DCA4A226D7CFD6
-:100D9000A15D3A921FAAF06C188BF0B476DF8E76C4
-:100DA000536209F36327AEAAF501FF49A4FC07ECDF
-:100DB0003893A999C3FD9FC1ECB6168E955B668BDF
-:100DC000A242BF37399A6763FD152CCFBAC5EAF343
-:100DD00045C6D32E35DC3C3B32BF5624B43DF0E152
-:100DE000456CBC7996752CBFD74775A48C61385675
-:100DF000A870CC294F60F9E6B75AD0BFB5DDDA8DBF
-:100E0000F33548CCCEAEEDB222BF1BC31760DC6415
-:100E1000C0C8F043B15B905EE58177313F6CCC2573
-:100E2000E912EF8EC09F5B58BD861744975760321A
-:100E30004907C17F472722435E4A0B271DACC07577
-:100E40008961458675AB7CB93881C9116A6EA63354
-:100E5000B8B2B8986EBF28DE30BFFA241BF31B115E
-:100E60009F847A976EBD23F1E6C502E0B70343780D
-:100E7000D357108BDFDEE7940EF646E20B91D68354
-:100E80005FF56E030977C5C21F39DACED7E7C9E926
-:100E9000EDFDC6D64AAF6A7F2816DC4F13DA1F8DE8
-:100EA0006B677B99FD51D006FEA7A6755452D136CB
-:100EB00095FD9C05FA6B5AE440FBBBA96F2FC6CF8A
-:100EC0001BE71219A651ABFA87B5751E35B2381E4D
-:100ED00095590188DFF738433BE17C5DCF2A2D8FA0
-:100EE00087E5B5287D9C9AC7A3E57D858F80FFB3F4
-:100EF0008793D00F3A744E8FEE3FCBDFB9B83C30BA
-:100F00007B91D70D96F8F4DCDE7F4B98763179B47F
-:100F10001FF5409E6CDC3C5A25780DD45B602FD4C5
-:100F20007A4003AA2F6B658F5582FC9DE17A81DAA6
-:100F30009D963E4E1DAFFA9A393978BE46EDAFFF09
-:100F4000013847779F95448D17393F41D73F989691
-:100F50003649FB7EFB02E8EFC1296A59F9FA17907E
-:100F6000377C9F31BA3F4419B53D14B4F1D29E7E0F
-:100F7000ACE79E99C37A3BD5E3FF317FDAB0FEBE82
-:100F8000E1BD79DD93E95889E267789E49D3C39B37
-:100F90005C2CAF568FE71B553ED6600955836ABD62
-:100FA00061D11A2FF43B94F7D6BFD40376B096F7ED
-:100FB000D6B4CE8BE79AA8DE7F4F3EE4D1FEF1F4A3
-:100FC00087AF10B0334FA23FA0E90B81F99DA9FD77
-:100FD000C0517CB1F4DF8FF843F618FDE0DAE97117
-:100FE0002A04F0B1E700370DF08B90E6CC6B28ECCB
-:100FF0008FE77B7A601D67E2C4C79FCD67767B531E
-:1010000041C5D63C80F5631C017DBCABE053B42BDD
-:101010001A5F9C332DF21CDEAABE07D979AE3DC6FD
-:1010200098EB7E369FC7F535BEF81CC64F4EFA3991
-:10103000A4B995827F13D89B2B571AC0B222A5FE64
-:10104000A598274B169908CCFF01D50E69DA739540
-:1010500002E7029BE87F9404C836EF8DA86F6F5BB0
-:1010600064B1411CBBA9A0760DF23B31C103A69C23
-:101070007E9E43F96F6B13308FA6ABCF3817ECA46D
-:10108000324A17FF6403BE7AD8BD0BF8E7A8297C63
-:1010900087087986B1F5EF670A991CEFE4BCCA8F1F
-:1010A0004B312E4222F399C7F731FBEBB57C5354F9
-:1010B0005CF0B57C6617CE54062B01D75E164289CC
-:1010C000600F3711CF27E0F7225E9B847121124019
-:1010D0007FA0EB4E09ED268B2B74F764A89F29A007
-:1010E000DDA4F911CEBC9886FA584981EF30E0456D
-:1010F000191F7AE0C700B7BB0535BEC4F84AE655EC
-:10110000B629605F195D4C9FB1527D06CE7B5CB6FF
-:10111000E9F8BF56026F7579518F2054C8C1B9F1F3
-:101120004A0BC7E22B3ABD99887215B4AF56FDD26F
-:10113000B974B73EB4206A769E1F05FE0C9702F084
-:101140007E9D2E6014AD9F433C9DB02F5FAAFBB7E0
-:10115000D9C4F4F5CD060BEAEB9A3E9CE81A443B61
-:10116000B121C0E1380D05BFC6F302ABD5BCF4A177
-:10117000FC702184F9F2A7F313D5F86727C34F3227
-:1011800088FE30F20CDB07AA79621EBD06772DAF10
-:101190005CEBCFA4C64B1B547F2E0518D67F9EAFA9
-:1011A000C557DBA3E3ACEAB84490CA22FD8E9B6B23
-:1011B0000819C479490E986F57AA9714D0EF8F5227
-:1011C0003C063C3BBA31D10FE7B63673831E887BB1
-:1011D00028252C9EA1C7A794024E3D1F14AEC6BC65
-:1011E000AB17E39C0FEA8B3E1F44F9C39ADFD07123
-:1011F0004A4BDF9301BFEF73AAED2F27984FAE3F05
-:101200001F34BA40C271FEDBCE07C99CA7973E735C
-:101210000A9CECFC8F763E486670D7F231F4E78288
-:10122000CE64040596C71FDAB91BE59E19EDBB977E
-:101230003E3ED809FEE2B3252619CE43A45EF77AD6
-:1012400027E6C5704233C415F5727D97BBB218E02E
-:10125000FFE035CFCB98F7AB93EBF1EC798C794687
-:10126000F87B3CEA7E7C5FF6BCB5FB7307E0CD29DA
-:101270002EFC73C847550EF031F3516F28E0E2E4BD
-:101280006D791645EA999D5ADE9633212A8FB1333E
-:101290004EDE563CFD5D889BAF7539EA619D43F992
-:1012A0005A73353D2C3A1F554CF846BB571B7F6E81
-:1012B000C81D155FBFE582D7A9DA2371D617CFFE07
-:1012C000BAD87C013D1C3AE3C8C37505F1F2053C70
-:1012D00022C4D73B21BE4E9F024714F483ED1DCAA2
-:1012E0001708A2DFF7B97CF45F99E3E60BB03C3254
-:1012F000E140BE04DF6D307A3D6097287B8D2A3F48
-:10130000F73F09FE8FCE0319E82F2305A162E07392
-:1013100082B33A1DF4A34E153FEB2F3C5F6073413F
-:101320008C7C815DFE293FCF6276F06022D5AF765E
-:1013300011266F947EE69FA4F346FF5CF8DE71A849
-:1013400077720B2CB88E632F9B7BCDA84FCB18FFE9
-:10135000AF4DE74590133D35651F821C3A46155049
-:10136000A0E3BA9BD6A11D1A6F7FEA3646C763B5C4
-:10137000F717BA4FCFA9FB7414EC7414980AFA7DCE
-:10138000576EE45EC1BC5B5D3CF805E021C8EFA38D
-:10139000E3FBE7ACB331AE7ADB2F6A309EAA9DA3A4
-:1013A000D5CECF12356E226D1490DF4B7B38BFE463
-:1013B000666462401B5D34E07D1E544C6D03D1A613
-:1013C00050AAB984BEE60C1CE89B52272DA7D17504
-:1013D0006D129474FADDAE7713D18FBAC125A9E7E7
-:1013E00021981DA5DCC3A11E47FB453B58E9A47805
-:1013F00043FB79A780F9F7CF16303D83A2881FE71A
-:10140000A33E3BD57C086DBC366208C2D3C0B1E7B1
-:101410000651981B4B4FD3FAEB34365B206E121EED
-:1014200067C0B8E439936711C6F592F308D87D9D7B
-:10143000F6E68D73593DF2D073D6B017EB7F2030AE
-:10144000859F48C930DF37D5FDD0EFEBF2EEE8B22B
-:101450003E6EAFBF17A08EF8F233B2479E937F5314
-:10146000956BE7BADCEABEC818F7EE344AFFE60629
-:1014700039B7494079DA3696C1CD308E3DB39C55A7
-:101480008B509E3AA99E89F365F3CFFA818B03FABC
-:10149000EB7432FCFAAEF3D6CFF7F3823CA63F8270
-:1014A000F24FC7EBDCC4F919BCD8BC2FD4EF9C5267
-:1014B000F8FDFA9D8F71F2E341C0339BFF61F0DFCD
-:1014C000D5B59945E067A73895FE37F1C8CFB6ADD9
-:1014D0004CC6F2D18DB9E8CF19A2DB13EBD7C07D92
-:1014E00007179A7F955FC8F0E2773A7F5A6D397790
-:1014F00018FAD1C31D104AD0E40F6D5A79555135F1
-:10150000F0C7460391D2401FD8A8CBF3D0D1739532
-:10151000E49B5608FAA269F020E353A13C01F56868
-:10152000AB0C707BD0706CEF6F015FF65A316FB00F
-:10153000715DF871F03BA64ABE998514CEA7D7BE5F
-:1015400057CD49D81DDA5B670FE4E3FD19B59DBAA5
-:101550007B09EE89CE2F211B9359FE464FF47B3831
-:101560003F1FD56E44DE09D33F379B7C856027CC77
-:10157000BA8CE5EB7DBCCA40002F3EB632FC51EE82
-:10158000B5AB7246CE8BD44F1717EAF4987BAD8873
-:101590001F75EA7925FD7E34007ED07DAB57F1E3DF
-:1015A000E3E72EC903FC38BDF7923CC08FCDC66E71
-:1015B0000FDE2390E3FB29C0F1F81CEF4103E34B5E
-:1015C000791783B7F5FA79FD9DF4ABBB0BE3C54DF5
-:1015D000A49F44C64D068CCCDFA558A3CFFB0C5C62
-:1015E000A47F34BE9FAB3027DACF55901353BFB2E0
-:1015F00058BF51BFBAF875103CEFA5C55306ECE1D2
-:101600009F3F1E01AF162BCB2B69291445A504D68D
-:10161000579B8DE7C7FE68917BB9EF759D51FEBC66
-:1016200097BFCA5EDF0DF3F030FFE3CB8274F05258
-:101630003AEECB84F91FF5EBFE7D3ECB83D1EC6710
-:10164000CD9ED38FBF57DDEF8142CF4B601FCFFAC6
-:10165000EA3CFA034EC03D39745C8BFF9FD02E23C9
-:10166000FD9C88E7CF2416CF6C7C71F9A3E03F5D29
-:10167000E557E390FB38B4BB573DF609D69FE9AB7D
-:10168000C37A5B3F17847866D35803CA6D2D8F41A8
-:10169000F3E334F5CF2680A79A1F87CEE30598475A
-:1016A000A22B6C42BE0576226DD728B0386DA38B75
-:1016B000C80AB0DABE68FF8796E7B4CD6B427ADF1E
-:1016C000D6CFF9C1AE4E35F9DC63119E63C50F1359
-:1016D00087F9C65B859ECF805F6979684F677B0E0F
-:1016E00003BDBA4C2413F3DDD5FDF00DC577D879D1
-:1016F00089BFBCCDCE4B84E2F0EBF70BB5F3120BF8
-:10170000517FFE0BF126C5CE23F7B33CF2A1BC35C9
-:10171000962F5E3F8FDAC84E56867B5F1AE0DE1743
-:1017200099C9CFA04E7E4696214F2C18C137EB8524
-:1017300041CC47D7EE7981BCB1C8EF1BE1BC45363F
-:10174000CB1F8BEA47E5A769FCCD18C789113FFD80
-:1017500049A4FD7148B3B34AB4F3316113F8695A2F
-:10176000DA5C6188071CB2ABE776D5BCD8166BF89B
-:1017700018F8315A9E4CC3732043FAFDB366D50F57
-:10178000CEF0BE9EFD9334AD3C8AF67A139CCFE733
-:1017900086E9695E5CBBEC8D1C88AB1C1AB2CB5E23
-:1017A000CF8173341A9FAD9719BFA8EFE3D879AAF8
-:1017B00040F4799A3113BE5FBEAB7D17AFFDF409DB
-:1017C000F1F8EDB7C199F1DB43F1CE21A97C528349
-:1017D000A39E1F5D2CFC86E492063F4AD7C86F7516
-:1017E000F0D3FBC334BF16E914D1EF45759200E482
-:1017F000656A7EAD0B9587F3BFE77DB95079D83028
-:10180000219E1DFEDDF6279E9CB8D87D19210F6113
-:101810007F8AE3CBC39CF27F51E7ADCF2750E7AD82
-:10182000CB2738640CCF67F75150F8B847E613C49C
-:10183000C5BF6FC927F81BD6A9CB27F8E675EAF311
-:10184000091E39F09003426E70EE0CFC0E03BB8D46
-:101850001847AFE66D1E96E7C5B3BC50E2C1FB3139
-:101860009B2C56F42FE8F3E028A75ADF0CFA6539D1
-:10187000D5FBE15CCE8E0E94CB0D193CFA1C21EF0A
-:101880004F9462E4590A3549416964BE17E4B1E3F3
-:10189000F9FE8BCCF7DA336128EFD2FD37E65D062F
-:1018A000265C40BE57712EA3BB576D9F8D8ABCBF6F
-:1018B000B2A2881AEA45F1F3ED5F56E93551CDD36E
-:1018C000B5080A89F447C56B777002B3775E358532
-:1018D000DF0D805E45BB81F865BA895AD3A5C3E7A1
-:1018E000D68FE77B5F87F9537D04F7F7CC8BEFA0AA
-:1018F000DFFE910C2242FEFB234605F75949218861
-:10190000D75A5E8236CE5AD58F7DA1FCE7C8DF5903
-:101910002EFCD7FF74BE33227F89D1E3DFC06F90E6
-:10192000FE86F88991C575B47B2BBE55CE7DDF7CD4
-:10193000469777116F5D5FE613C487F113BD1913E6
-:10194000918E3CE867BC58F997584AF52180C73E0C
-:10195000B304A46651EFA720F764687E5176DFDFF9
-:101960007DE350EFFCD8CAE6ABDDBBA1AD67CAC4CE
-:10197000EFD78E2DCEF1964EA4F33E3EDB83E77774
-:1019800037D899DE167E92E5AFEBEF91A074C3EEE7
-:10199000D550EFE1D59F87AFD6CFEFEF24BF974F5C
-:1019A000FC1F4E471729BF2F7E1DD1F6EC213BCBE4
-:1019B0000F1CB667FFDBD67551F25ACB172EAB184A
-:1019C00054FDFD1C017FBF364ED3203B6FB351DD6C
-:1019D0004FEDFDEF54FFDEA1899E4D4087A5A5C1C7
-:1019E0009D70EEA49138F01EF1C6C0ED7BDE74B19F
-:1019F00073B4582E607147E2B5E139EB1DB9BE07EB
-:101A000018FD86D6037D8E779132881B74152C20A5
-:101A10007536CC277808E860FCBAD0CE374B319FBA
-:101A2000AA19E855CB272E3BFFD9FAB9A5385FF4A0
-:101A3000FFBACCD1F76FF44D64F6A0F67C4EA50347
-:101A4000BAED19309FD32BD9B9D2269747043FB2AC
-:101A500016BF4E940631FEDFB88F194565602B42E4
-:101A6000FD1D6391BE1AF7CD2E81B82609584BF0A3
-:101A7000FEDD3FB17BAF4FAF1D8DFEC69202DF2F63
-:101A8000615DF652FFE560478FA7E340FCF3F4DEAB
-:101A9000CB4B7C31F8661A9FAC407C388D27810790
-:101AA000C461BE45EDE7C5E82F5E1F463FD6CE892F
-:101AB000128B27BB985C6FEAAF21CB6DC3659B2B64
-:101AC000FA1CD540E19C9D308F9D13595C5FCBE79C
-:101AD0007453350CFC867A7C72ABF99C356ABE3245
-:101AE000512CC379CA59DF9ECFA9CD4F2B6BF99CDE
-:101AF000895F30FB3D4B3461FE877D23E3AB641D82
-:101B0000C1B8C1CCF060651285534E4F7026C02914
-:101B100009C08EF7B186EE9E4CDFBB460933C11F6C
-:101B2000B2B375CA00E8BFC2A6C11FC09648DD6245
-:101B300005B81877E47ADF033C21427301F0A58AE7
-:101B4000DF1BD979A34D89A857F664D6E379A3336F
-:101B5000EF9963DE27A03D15D29E0E7187AC8DFFF5
-:101B60008EF17DFB3E2EE6B9B44B8B6CEA79A4F680
-:101B7000748863D8370E2AE5B4FFAC7B39A29AD1BA
-:101B8000195C3AF8870503C8D7BA3E764F5D5DB752
-:101B9000B3C282F286F96BC84C17CA1161D395069D
-:101BA000E013421BD562E93AA714B1F8746E8F684E
-:101BB0000039F5CF5FF331E348E755BC6EB0844C94
-:101BC00000AE0673F860BA7B385F473BAFA2F97B83
-:101BD00086E4CFBEA5E8EFB9F8FCECF0F598FFF786
-:101BE000752AC657E639983D4205917A4F4B74FBEA
-:101BF00011F7B4A87A8B6617EBE9409FEF9C533E30
-:101C00001AE982F2D1C036318AEFC5CC7B6E1598C5
-:101C1000DE4DD7616A8179CC4E97C13F77A179E6D5
-:101C20007A7B7A48CF51F5126DDE7F6B5EB6565FD8
-:101C30000FF9D831FC1F9A5ED3A99D67FE9ADDA3E8
-:101C4000355EB5278E76FD5731BBAF50CBFFF0E345
-:101C5000533052FE89F813BA4C013CD8E73434169D
-:101C6000617CA911FBD9C4EEDB1FBF31BBBDBC1425
-:101C70009E22E128BC8FEE5F3D1EE3B7942E726377
-:101C8000D0C5918946D6FFA644C463E17E82D98C33
-:101C9000823315F1587890E1EBBB13197E69F9672F
-:101CA0005A1CF0D0449F17CE1B0EDDAFD19AC0EE68
-:101CB000D750F3B8EDADEF3D0BF756EC54E3C0034E
-:101CC0002F4F5C80F1B94D0207F6E139E7D2F1E020
-:101CD000BFBBBE88E1B95D1824A22D925E07F01C3F
-:101CE00060D601767E4950F34D854DAE5D809F16DE
-:101CF000B70FCF3BFEA033C8633E9378FC81B91287
-:101D0000D81D6113E49F9D6C13C2ED4ED49FA2FCBD
-:101D1000647ABF171102985FD354F4F7B543EE2DE0
-:101D20008AEB9FFA4EE728C8B7F8A7BE2B5EC7F329
-:101D30004F5DFC3AF4E727987D425E66794A31D6DA
-:101D400015E5BFFCDED7A5F92DF5796723E898F9ED
-:101D50003F347B488B3F108F1295173E601483A051
-:101D6000F7409EED7332E8D54F5823F3C29E57F1EA
-:101D70007EE8FE3EE2B7C2B9FB8FE1DC30CA3B79B8
-:101D800023C4416FE7EDDD60DF7540BE3EE897009C
-:101D90005F2EE2DCC2FB76CC7B6815D8B906A2B018
-:101DA00073112DCB9B9F80F62D6D6922C05FA968B2
-:101DB000FE159E7B30106F077D7EAEFEFE84361FC3
-:101DC0002D8F3F9EFC1C91C7FF2DE71032E29C43F4
-:101DD000785BC5FB826504CF21908D9E5D30AF9E00
-:101DE000368140BC37792E2B8F172CF87B2856C8AC
-:101DF000871E85E746316F394CE109F9D756C88708
-:101E00001E05E744D87D85DC82B9887FC9143EA0D1
-:101E1000177418D9FD84CA3536C4A7CAB92C7E995F
-:101E2000EC3521FF394B64CC9F57E01E3317E05946
-:101E30003BE267D89E8AF1D7E41CA6475ABD2683A9
-:101E4000C58DF9CE88AF614ECB77667CAF67A9842C
-:101E500079E843F7152E27B83F9B72AB33E0770044
-:101E6000465F65E2205EA3C9990A153F7A76A9ED1F
-:101E70001B587BB8CF10E6475A58FBA1FB0C7FCA12
-:101E8000EA5B8510DE07447518F53E3D56DFB23833
-:101E900015E98757CFAB92EBD47C7B8EDD1FD5B293
-:101EA0007834AB77303E486E4A50E5B9DAFED664F6
-:101EB000BF1A2F6079F3AB0CEA3D00DD24329EABF4
-:101EC000D159F2B79CBBF8C570FE3CD273C7E5226E
-:101ED000E6076AF73156D84CEC3C96259AAE9E2917
-:101EE0004A66785F2E5B60DC656E4FFAA498FCD181
-:101EF000BF3492AF8CD6F8CA4D269D5D96C6E0EAF7
-:101F000008EF64E7B6CC176597C58F2B3E99111D76
-:101F100057DC93111957D4F6B762A509F94A8F53C4
-:101F20007A0DF28FB651D0C2FD76FA756F1BBAA743
-:101F3000DA6F05BD546F0F1E8A9367B46812F3E71A
-:101F4000C971FC108B26C5932F71E2B425E6FFA65C
-:101F50007833E3BF0371CEE90DC14BD39B2CFAB8A4
-:101F60008772517E9F01CBCF900F7A3A0462BD8C6D
-:101F70009675E7CA281F44BEA8B49BC50E17F0D1BA
-:101F80009F215F6CA596AB39822F5273F412E0C784
-:101F9000037716E0EFCBBC76A78CCFB3562EC04F9D
-:101FA00086677809684C4B8A0F2C847B9BCFDAC3F9
-:101FB0009970CFF3BAC96F5C8BE594F01128DF51AB
-:101FC0004C16613937BC13EE7DBEBFB8FD5AB8D789
-:101FD000F92CD0D868426E7DF6B66B9522FC3D8414
-:101FE000F583A0DF97EAF2F175F7D0C2B951584FE7
-:101FF0009ACD8471DF34F5BC2EA952FD4390E905DA
-:1020000074975182797A3622ED1B84FAB14CEED264
-:10201000FA36B8E7B423D7CDE2D084F1013256CDF9
-:10202000E3202105FC511D6E27B61FD2EFF699D58E
-:102030003C3036FEE1E7D8FD3CDA396442C47160D9
-:1020400037DA241255D6EE752682380EEE61ED5041
-:10205000F1402BF7A7F91E9A1461571E9E737B114E
-:10206000ACF3E3E7EFC8017DEA87EAEF32E9F1EA92
-:10207000C6C90CBFDB13FFBA04F8F8BBBC4306FFAC
-:10208000414B9A6F17F4B7DCD536CD49F1A74A9C7E
-:102090008DBFFF324359CC015F715ECDE6E7ACF2F4
-:1020A00072CB8B867F1726C527A09F9EF87A78D0A3
-:1020B000B7538E7B45804FBD259C29D07EFEE4F230
-:1020C0003D03FD9E5BFAC16D989737FAF011B81F7A
-:1020D000F2B0B1BBD201F8E456EF03A63B06E763CA
-:1020E0000E8E19DFABFEBE0D3B2793CBA971D860D6
-:1020F00015C8852B08C35B2843FD95EA7D67D5226B
-:10210000BB3FB3BAD48DBF57369F8405C087EA77EB
-:10211000BD0E02F471B5AF34D6FD13DA93A41BA53E
-:1021200048FAB95C8A28D3FFAE2C882EFF488E2E41
-:10213000FFB8FCEBFCA8B2E07963520AC837267FEF
-:1021400094E94CFE8824D00EF2F1A966710AC6D536
-:102150005D9C02E5892F8CC6BC2492CEF2192638EC
-:10216000B2FC0C0ED9DB615D612AE77B5DF0BB47F9
-:10217000EC1EABD4774DBBE09E042249DB810E9F61
-:10218000371660DE66AAADF69FDA509FB1935CE425
-:1021900053D276C46BBB4582DF6F78C5CEF2113A5D
-:1021A000EE3760BC8973580C1EFA1DDF2B30F96FB7
-:1021B0005F5909F57C19DD102AAB079CEC77943A3E
-:1021C000A611637B09EC9BFC2EEA45760BE6ED57E6
-:1021D000390A7E02F5BCC384F73ABC622FF3A9E347
-:1021E00011E8FF31FB4A6C0F3CDA48E977C0CAFCC2
-:1021F000EB3CB58FDBD9F8F87B69FCCD441DDF42A1
-:102200004C50AE2598873FE014D97C6F35603C0474
-:10221000EA2FC3F959B05EBB8770F8DCEB6C01EFB5
-:1022200063E7881A1F6BC3F2432A1FEC308AAF00A2
-:102230009E2A7F2604F6A3CAF105D2016F70C878E2
-:102240006F8E87E4B85209F359D0EFF9543108F989
-:10225000ECFCCD0EB49B41F3817AF02110A46BC14C
-:1022600043CA54D70C8EE7390A783C9E235ED88F38
-:102270006B8BB3901F3D6A38BC05F32B6C5EB34C7F
-:10228000C7315D47707FE5C4D8E75DF38A199D8E3D
-:10229000DCBFB274C8E3E01CE5123C3BECE5129CE9
-:1022A000DF1970CAE9DE88728C7DF103DE0CEF8BDA
-:1022B00025682886FD9025D02FBEBD3F5A6F83F537
-:1022C00048382F7EB42C811D9AE3A0FD50BE2F8F7D
-:1022D0008ABD8E6BD57504D4FBF1F4F595C586EFF8
-:1022E0007B9D3AFCFB8EEB4C8D5EE7F738CF10F709
-:1022F0003DCC93CFA4F3B30DCF8FFE13EFEBBAC257
-:102300006640FCBA42BB37A920FADC85FE9C0595E5
-:10231000C05B81CFFC50CD1FAD48FC47F4E35F4E5E
-:10232000F57C906B07137F9603F99BD5496D9D8CC7
-:10233000389A4F2F077E6CE190EF5C4982EBE1FD0C
-:10234000D9D9BE479CD9C8F75717C3B931DE979F73
-:102350004CCB1F1BBB73D6B8912FD6C37B1B092355
-:10236000DD5D01BF8F067437CFDF09653A4633DE86
-:102370009F45E910E856A3C391F3A77449BF1FD343
-:10238000ECC0734D3B48100FA6A5936E8EF95B9A77
-:10239000516E1169DCF03A29D1565B9A711DBF6DFF
-:1023A00053503EFCD0F98000E587655F1BCC6BD1B4
-:1023B000E44FF0DE7B92BE341FEC4E3ADFF6FF971F
-:1023C000F31D79DEFC9BCF51FCBDECD1C78B599C32
-:1023D00043B3475D09549FA0F39438874CA8FE3857
-:1023E000649F1A2D9897307C3E375C87E780B9242C
-:1023F0002FC833ED7CAE9EEFCEBA8CF1DD8FD7388F
-:10240000E476BCAF700FDAA54D57DBB4F3BBA87F01
-:1024100035AD34A8E77739942B8DC482F7070DFDCD
-:102420007E1CFDE352877F9F633F9CE32DFDA673D7
-:10243000BC129E1356D6B138FD907DD72032FB5585
-:10244000FB9D875BB3B4FBF8999EB2865C907D1BC5
-:10245000E37C2FEA8D24C9A0DAAF4C5FE8992E897E
-:102460000AC1F82AD3C3179BB07E73821F7F37A59A
-:102470008EEF4624F963B153BD17C16FC5DF5732E4
-:10248000C979C027B438EBC21CDFFB80BFCB8B3CC3
-:10249000991C5D4A9D89C54F291D6C1FA4ADE6920C
-:1024A000E6C7E0F7B32E27CD6F1BB2910E8E221D2B
-:1024B0004CFC84FDAED6301D1C2B86FC06C2FC01F4
-:1024C00057A871A2973E7EBC13F6FD2C47D8F9AEF3
-:1024D00002FDF92EEFA9629C5F48FD5D9D68BE1369
-:1024E000318FE346360F17CFE33C3E8B358F1174A7
-:1024F00048FC383EDDDF663C47AEC323FD7CB8FEBA
-:10250000DBF1BCFFF6EB89C84F07393E6805788ED2
-:10251000058CC88675FA0C93A7A13CF7C1FD669A95
-:102520005D3D62DEBC0DF775E1E2A13C9DF91965E8
-:10253000102762E33E94D8F820F83D9AAE37227F08
-:10254000AFE99F847ADA41C52C421224A962F93599
-:1025500032FD1FCC6B11F1CC71D27EAE126BF0BE8E
-:10256000B4ABE7E9F37294BB9A69FB6BD43C9F85EB
-:10257000571B8F46EA9B678DF718010E4A9DAD9950
-:102580009F01FD09C3EDDD23E132E2BEA64EC69FE9
-:1025900008D573A0FF8EF200F2A7787C2A6FF25064
-:1025A000BE4FFEDF98EF533C19F1E29BF37D64359B
-:1025B000DFE7356318EFE1FC4DCA8AED6BE83AF3CB
-:1025C0001F2EC2DF139D93BAEAB1FB69F9896D131F
-:1025D000B0FC9BD4EB6F390CF53BF3B05C65F86451
-:1025E00009D04341D9E22BE077585FB3B27ED213D2
-:1025F0007C3D35F4BBF4E2AC2970B14B95298CDFFE
-:102600005D39B9612AF863AA1258F950C93B53B031
-:102610009CA596A7BC3401CAAF719F2C89C517270A
-:102620001670C1422A6FAB92D9F7F3A63C391AEC67
-:10263000F8AA0A569E28CFDE940DF5864F97C4D28D
-:1026400097AE9FCCF8EAACAFCE768E72415898FD2B
-:102650003EE80B9E0FF07736BC54DEC2397C6F39F2
-:102660008BC3793D2502FCAE538587952B6D6D1983
-:10267000C007E7FB4CA51077156DEE4EF8BDC2A460
-:10268000F2D9D360DF2BA9BA0D714E4A5F37009E95
-:102690002FBAE4934C07EAA51A7D8946787EC37D5C
-:1026A0008BCBD8BE45D303ED6F15F67769B4FC1C10
-:1026B00041AF3A3CBCC23296E11D958BE6F291F4F3
-:1026C000AAE7DF647D808BA4D71D80973CD2ED5AAA
-:1026D00018DF641894E0FD784E9E207E03FD9E3541
-:1026E000BEEFC638107DC15F1A836FD03F41D3F370
-:1026F000D92C443115F397595E4FFF3BD81E8E837A
-:10270000F01938FE26189FAC67F3D901F790F060F6
-:10271000EFF91E053ED198CE7EF711E2FA40A7E907
-:102720001ABFEA8B5E6F47B97C93931F395F83852D
-:10273000C1F16A551FFB7DAB37A5844E7621693602
-:10274000C27A1F4A742810CF6DAA65F74906D27C59
-:102750000FC33EF106E540889697138F89F137CF76
-:102760007698A7B62F8DEABE345ADEC77C36F8833A
-:102770007B4E46C0A34FCF47A3D73FBC2F8319F052
-:10278000CC807B54B2619DF2463EC67A88D0BC298B
-:10279000D24FFFD0B7FAE909F3B7C866F55E94F0F7
-:1027A00092487F5C87BDF991483B999A65789FD1A3
-:1027B000A1B61C120BEF343DE910A7FAB5A8DE0B49
-:1027C000FAC0E7097F45FD84528CD798097EADF9A0
-:1027D000A8C770268B08F1EBF4DA74C4D72D542FF8
-:1027E000013FBB5211C8467FF94E9EC0FD03C37026
-:1027F000A033710FE3E7F1C9CC0E4C1B8287827CBA
-:10280000D464E062EA57C7271BD47B50D9F9D2467B
-:102810008B99E57FAABF4BA1E5B1345A8AD637E33D
-:10282000FA2C8C7E74FB3422AF459F27674943FD09
-:10283000429C4264908723F360F4768282EBF8D165
-:10284000507C8130FD67AD1DF59F1FA9F1056EC15C
-:1028500017B83FC914BFCC2E8823481CD82BC9A554
-:1028600087053269F87724E1F797C09FF57C96EFEA
-:1028700093C911F1F837A73D817921470C2C0EAA95
-:1028800087CF5743F00961BE6AA3C6AFF4EB8F331D
-:10289000FFFE34EF5F61BC8FB9C132A8D4E253545C
-:1028A000ECBBA1BFFF0B8F9234BF00800000000083
-:1028B0001F8B080000000000000BE57D097C5445DB
-:1028C000B677DDBEBD25E9249D859010960E3B129E
-:1028D000B03B21618726408651C000A2A008371076
-:1028E000D6AC82CEA0E3980E0144079D38A2328A6E
-:1028F000DA202028308D02A246A70544FC74346EED
-:10290000E3FA98C40551B61844719E6FFCCEFFD40B
-:10291000BDA46F13467CCBEF37EFFBF0375339B7CD
-:10292000EADEAA3AE7D4D9EA5475923B6B5492474F
-:1029300008F1C38F3FFE982FC495F4A7E82644639F
-:1029400037CDEECD13E26A5134D6AA08913C4EB38E
-:10295000692E21C6AAF47F038468D9A6041DF47CDD
-:102960008C3FC6225285A83C640B06095EFC8A2A6D
-:10297000002F7E480D0A825B84776D23DA071CEEF8
-:102980000095F7C7F5FFFD302A3F7DC8E675A0DF4B
-:1029900080FFADDED46F09FA25B8D75A8BF0380521
-:1029A000FFFB91FED727182B3CBD5BE1BE5B924D30
-:1029B00070BF500753FB4BF77635D5FBC29798EAAB
-:1029C000730FE598E0BC8621A6F603DF2F30C183A4
-:1029D0001B2F33B51F7A74B2091EDE7C8DA9FDC88A
-:1029E000B3B34DF5A509850797D27C0FA6AB421965
-:1029F00024C428516A6A5FAA96D98585FEA8B37D4A
-:102A0000D248EF55D17F3F7625589D61059ECFEC8A
-:102A100055444A9610F3D7CA7AE3BD05F577AFCC93
-:102A2000A47261D0FCBC54585B617A6FE9C70BDFBC
-:102A30003810D15FAFD4624B1295A3BCF1A947FA0D
-:102A400062C262E08F2AD3D51B069DDE51BD0E49BE
-:102A50000AA6F3E2ED4AF00EA2634FD1E37ED08DD9
-:102A6000E82C821ED055D6B7AC538301EAE7BBEA07
-:102A7000056F1CB0117C28776D23D17F7E8DC3AD8F
-:102A800052BD23DD4CCF188F999E71BDCDF48CF7CC
-:102A90009AE99938C84CCF24BF999E29E3CCF46CAD
-:102AA0005764A667FB69667A6668667A662E30D3D5
-:102AB000B35395999E5D969AE999155864AA8FE645
-:102AC000DF6EAB169BEAEF8F7BE188467848EDA07E
-:102AD000BA1D6E217AD4DD6CFA9E50C7DB5710BE4A
-:102AE0004A3355A1BA5BF92040FF311F882A5E5F47
-:102AF000F3880F1E203A9C11AB0F667ACEE7878AC7
-:102B0000BD77DBB13E7F2E3F2C8BE203E2BB447CE2
-:102B1000E747FC1B797E69D0F90AAB7F95B79D101A
-:102B20000F7AB5DFA19CD6EBEBCE56921BA2A8B8CC
-:102B30005751BC102ED13C13FC542112BC77A07409
-:102B40007E9C057EC13F4706FD9F5F74B712DE1471
-:102B50001D6F62AFED78A3312E9AB752FF5E16E675
-:102B6000BD8E985145FB892145D0F83A8A860CC81C
-:102B7000A70C51A5A04C17DE552AC6EDE99484791F
-:102B8000E0CF1F3399309630BDFF41898DF97759D9
-:102B90005CFF6DE0CBF76B255F9E4693C1425C23E3
-:102BA00042367CE783D8073BA1BF0242B832189572
-:102BB00075D761FC33307EAF10D789461B3E3E4B44
-:102BC000083BCA62E1E1728EF0DBF1FE5C115E89C6
-:102BD000C97C94AA6D073E2A54AD4B1AF0D1B1A11D
-:102BE00073513F2A5F4BC1A02F8857505CD07B6F39
-:102BF000E34F6AF789B76837BE33DAE9B9E15EC2F5
-:102C0000CF3E8B581022BA88F1293C6E612DEA37ED
-:102C1000B95F5BDF5946424D88E7144D03BE031987
-:102C20004EEF2620393DF4A442F3BB24D9937347D9
-:102C3000526BFB035E0BB727D60B28D4FEF15DB1B8
-:102C40008CAFBEEDD727635E3FB7DF06AFFF558C75
-:102C5000DB68FF53F3B5DBBD8B6EA47E9B1551B5CE
-:102C60008106F18E4E974C07F10F8D37534DF0D6FC
-:102C7000826E71330FB6233C2C69AF7D00BD34EDFD
-:102C8000EA5FAE04ACEC4BF12CA6F19D2A6ECCC7EA
-:102C90007809FFFF86FA3227E19FA676A293D62B0A
-:102CA000114C5124F14F7FF42B6A73FC723C077472
-:102CB000FCD7B7D78EE03BFB2C0D9DBDA0A3B52163
-:102CC0009FE9E896F33A619778B9101E0AE23ACD87
-:102CD00000FE4B1C0EAF4AF82C50E4773F4B9C355E
-:102CE000B392C63DD7529416564DE3FE06782B7329
-:102CF0001577C9C0B86DFAB89DED74BC7BB2B1AEA2
-:102D00002E34EE5A7C9FF014F8AD12DC9485E7E186
-:102D1000AD809F166EF71D3E5A7316A9979B6B9454
-:102D2000E006AA7F43C7F343366A8775E914C935BD
-:102D300034BE2B86AF588F76BFD39C3CEE4DC27B02
-:102D4000C99A2CD043B0BCCFBC4D09D6123C5B789D
-:102D500099EF4B4451E75DB00F7C5ABC8FC6F1B779
-:102D6000B87FE465597819E7BD43DFD9B3ACBDF747
-:102D70000E40C32E8EFF7B93E440FF932748BD3364
-:102D800057C7DB95A288D7E955A28A4B5AF0272A64
-:102D9000A8DD34FA0BEB93E07E18DF74C0BED67565
-:102DA0003D4334703953B89F6FA46FBD55D3FEC6F1
-:102DB0009BA8CD644B7367BB8A754AEB368BF1DFFA
-:102DC0001DE3FF76EC9B8715E0FD169263A0F79A52
-:102DD0007617C5C79314894F5AB7D9BE3C5EB7035F
-:102DE0007C9688F533A69DE43FABBBC73F5B3F2491
-:102DF000181332D284F8851485E2FED3092295E6B1
-:102E0000D9D0550D3AB2A0A76FB1EEA27936903D58
-:102E1000E1C0BCFDC51D4E51FD38D2B77748F91A47
-:102E20001F2078A25F1577301F342E5F48CF5F1BBD
-:102E300044F5D4FEE51A113F80E0977D366F2DF101
-:102E4000E1D8B3DA81442A2792DC0F53EBCBD2EFDF
-:102E50001E03FB605C47D223117AE2B2EE6698163D
-:102E60004247D0E9721DDFE3B3CD7A6722F48ED1F9
-:102E7000BE0DBD43F255057E27FB74FD7389B80472
-:102E8000FA677FF55EF129E917430F8DA61986B21F
-:102E90002FAC8762EC05D7806E447F3BD6C76C2B86
-:102EA000B507BEDD5A874911EB656FBEC274F2905B
-:102EB000E2B1D0FCDF38A406811FAB3F3C14F85BC5
-:102EC000FCBCC27CFA079F3617DF3B696B9C07BED0
-:102ED0006918969B28A8FF4FAA6920BD68FD563B3C
-:102EE000859FD6C2916A37C347ABD3B9FCAADAC370
-:102EF000E5F1EADE5C7FB2DACBF0B3BEA20AF0C342
-:102F0000EC555F5BB56CF45FC5F6D1921AAB00BDB2
-:102F100096C42F96B0CDE98610BEADD3414B1CC1EF
-:102F2000B705152FF4E2C25DC1957134AED27ABFF8
-:102F3000DD05F9D72979B40BEDEF5598EBE71DAA1C
-:102F40003A88E99E7CE793AB2688D6F9969F55840C
-:102F5000464BAE5B9EFFB798CF17D583785C5F5624
-:102F6000FB795CFEFAA68329F4BD63D5E3187EC71E
-:102F700057548B767EF135DB1113B6355961678C6A
-:102F8000F52B7ED079845F048384AFB536A957D6FC
-:102F9000925E811C18D56FF2433708C87DED4ECC88
-:102FA000736AF29CB1B057270E2A66FBF5EA1F043C
-:102FB000DBAF06FFFFD43AF288869399D4DF89808D
-:102FC000C44FCBAEB7196EB1127E68C62FEC2A2D56
-:102FD00015641FB49C7D4B3EA7766CA7EE96ED164C
-:102FE000DB64BBC5BB7F97CCCF15A55944E8BB6359
-:102FF000444741788873663EF419E1E7D8F65FA745
-:103000006B11FC752C39F4ED879093FF66F16E60BF
-:103010003ED53E7D167274B99BE5CC495BE8C8038A
-:1030200090B39D48AF727D55DC64E2B30ABBD09883
-:10303000EF84D617F0B15831ABC825FBF3F492CF2B
-:10304000C18F3D77DCDFF5379ED6FEB684E67EF88D
-:1030500000E8B0E3A3844B68BC7D541152317F215A
-:10306000C711D818CBFD943D797BB29FE0AD8A683B
-:1030700051594E04595EFCCE26A6A1DFDE8AD5BE8C
-:103080003499FCAA3B9FCEC4BC7BA9A24AA5753942
-:10309000E7AE67329FA1F71E2359A4D2F89FB379F8
-:1030A0004FEEC5771FA2F153BF8FDD599E037958AC
-:1030B000F2878597000F7F81D0223A3CF1F44EB61B
-:1030C000178827BDA349AEF55BF3E2B20C6A7FE92E
-:1030D000BA264B072A7D1B955A94A5DB76BE55432D
-:1030E000FDE5BA2D55B05FDFF279785C39A1F51BAB
-:1030F00014E8811F1EED807599BDE6EB820EE2C2D9
-:1031000076C6139DDF6F29F6B05CE0F777D74F796D
-:10311000FB5A013B862C188CB7D8EE65BD46D3B65A
-:10312000013FBBBAADC7FB7B2C01D65781D9D2CEAC
-:10313000395114F823E65F4EED030497FB1A9A6E9B
-:10314000A2FAF2A4AE2240F33F1A5C321DF5031539
-:10315000E1067E2A76DD5BD881E013C38457A1FEA9
-:1031600017EC3E5DC8FAB013D9EAF8DEAEDAB46BFC
-:10317000A00FB30BF254AA2F5243DC9FA894FD5525
-:10318000D6EF740226D427ABC46749F5A3F6677A55
-:103190005AE96369BC2BCB4ADF6B47FA14E35D9BAA
-:1031A00015C8A872B5EADF645FD169AC1BE1BEA7A0
-:1031B00018DFF99CC605FBEC62F5A5DD52B590C79A
-:1031C000932EDC81C1ADDFED64092FC43C6875B876
-:1031D00003F49D4DEE86E9DC8EE0DF73BF9A9A938F
-:1031E00007FB8AB09E2AF57B2DFA754FE90C7A5DB4
-:1031F0006CFFF7C7FD83EDB44A4B82D731A0D5CE23
-:10320000999652FB7C23D12BD85E4BCC6907FB5897
-:10321000DAC9C2EAF540EE57B7F7BB73D84E233D83
-:103220006C61FD9B9A1361379FB3DB9C17A77F43AB
-:10323000EDFD1DF0BD8B6DEFD1E312E7E4F0991CBD
-:10324000931CAE8DB70B1F3DAF5DE3E03886386051
-:10325000293B48FECA707CC2D2FABD25F139EDA1E6
-:103260001F6A8568135F2FD0FAD708B761D21B1A7F
-:10327000C98111679B558DE544C3FEC40190B7C257
-:103280001FEF41DCC022B408FD18FD1DA2D760CCA1
-:103290006F9488135A849EF58B243BD6AD70255FBE
-:1032A000E4BCC38F9AF5CFBE4723E73DACE5FD38BC
-:1032B0009860848FF6282F34AFE7F579FD19F3A2D3
-:1032C00072677ED1E5A0DFF06FDC56CC6FB8755227
-:1032D000675F571EF7243C1FF18DC53CEE1F624D02
-:1032E000F0C58EFF46851C3BF0F1D7F620D65F3D3A
-:1032F0006C059A47FDC2EC20D6FB1EBB0838E1F7EF
-:103300004CB6B31D5C1F1F88875CAD57DC21C49F82
-:103310009EB3354C977E91706FF2817F5F7F10FC7A
-:103320007F4D8B5D413CAB83431C817D25D444B1F3
-:103330002935E2FBEDDC1CE750A13772091EAC3FDA
-:103340009F6EE7E7B536C17A32303D96C7B526A9FC
-:10335000EAD57E54BFA626D34B2317EF8BE0AAAE47
-:10336000A8BF4565793ED4B261D37DF07B26A5B375
-:103370009E599314CEAC44FB85977803C40F7BFE13
-:10338000A1B2FE58E3F36724BB200749CE139DD7B3
-:103390004CF267C4A6A24CB360BE1D48CEF3F32C1A
-:1033A0006A47E58736D9EE039D6E84E90CC8DB07D2
-:1033B0004A7A08963F390577F03AA10A27F1F35483
-:1033C0004902317DEEBDE226B4D3D4A09A05BCDC1F
-:1033D00075674F82AF99ADBA11A79BBA20A649E98C
-:1033E0004FA5A6861D09F4C29563FD91FEFADA1C6D
-:1033F000FF1DA07379A84FB7CF22F878FADC1EBF63
-:10340000827CF884FC68F8DD77A4697FE0FEF7FA37
-:10341000B8DD5E326E7E849E707AFAB3BD5D62F86E
-:1034200099E139C0EF0BCD4EB6632FC40F42789DA2
-:1034300097D0F7EFB38810F8B98BAED76B110000B7
-:103440009D4331CC07E3263BFD1CAF725936C08E3D
-:103450007E84E805FD16D8ED607A91A064FADDF768
-:103460004227D64BB37439563B2D96DFABDD690B43
-:103470005A406725B87533DE7B3E86F567995DB0A7
-:10348000BF52F66C5FE6833D767FD60AF4FB82433B
-:10349000EAED044F22D7FF9F1481FAE7747D5D1691
-:1034A0001BEE994474EADA4E7B0A7823BEABE2E75E
-:1034B00076F9FC70B0603DD6A520FB266E04C1C233
-:1034C000BF1EF22A4076D026AFA41FC6A5D576DA55
-:1034D00080F16A340ED059DCACF27C0ED35AC6FCB3
-:1034E0000E5775E2712993C765CCA5FA4F17C771BE
-:1034F000DCF570D1C133B0030EA7ABBCEE4942DDA1
-:103500003990EA49E736DC4170E5C24F5E1F484F0B
-:103510002B6A3FE8BCD7D38AF719CBCAC70BE28323
-:10352000198B6E9928122EBC5E679439E053B6AEA3
-:103530006F618773276192EB4D39FE06F0C17FE41E
-:10354000686FA3ACCC267B9BF8E8A4BDE161C455B1
-:103550008E7AB4BF022FA79EF962339E0B6B734F16
-:10356000E60F676321E23265161957BA2B57FB380D
-:1035700087F56C02D3AF32E460FAC5653748B97895
-:10358000CBC5E983AFEA37ED51A89FD2D8FA0A2E0E
-:10359000D5607FE8AB634A3841E9C6F8D5B0AE8E56
-:1035A000BBC309A08F6691F65EE996E879D250D345
-:1035B00010771342FAA921FB501AD72212BD0FB877
-:1035C000F1DCDEDA3EAB958EF41DA6A3707D3CF3F4
-:1035D0003768BFB54FCE1D84F7D2A4BD770DCD3A65
-:1035E0001F7FD1B0319FF3C7A3AF93A27002D6C99A
-:1035F0003145AE93E342CAAFC096183D5E20C77115
-:10360000F299F63C8E347D1D9D54F4765B1DB21DFF
-:10361000F11EEC99D23F49BEBBCFE665BD19207DB6
-:103620000279599A22E15247BA1BF656073560894A
-:10363000055F560B5E2F34365E97C77664F2FB86C5
-:103640005C13454240AE95EEC8D820ED3ADD6FC61A
-:1036500004A8FDA227647F8021FFBF7A3C53EF5F5F
-:10366000AEA768BA46E3A15BAE8C73D5C6E7B7FFD9
-:1036700067F1CDDEE91FAD8308BACF26D775205E8E
-:10368000EA11B25BD227F5C3FE84DDF4DD93F1F6D7
-:10369000597E17F629CCCF8DEF5D9AAB70BF5DA236
-:1036A000E8DE416D7E11F6927854B09C881E477E0C
-:1036B000AEF4571F7FFC1C9D554977622483BF3CA5
-:1036C0008C3F61037D3EB01B74BC2193E47A29706A
-:1036D000D5B5158F7B7C5A26F4C849C084EF3D4987
-:1036E0000467C3DE92FAC3800D7A44F3E9B20FE6B1
-:1036F0006536D2FB7372A57F501B93D05F24A2EC7A
-:103700001C841CA821BCA29EF4E0ACA26CF8C3E30C
-:10371000EEF9CCD63A9F23D57E3FA9A073F0BCB575
-:103720003E27D6E7FC753EE7EC087AD46EC93DE447
-:1037300021BC1FDF62456452D45A83770D49C5739B
-:103740003514105CEF04BE8FBBF6BD8E76F3D62524
-:10375000E5A811F269FEDAB1FE92083AF4DD62A63C
-:103760004BBF9019BE74AF192E27DD8EF9FDDCF723
-:103770007C61339C7BC80C3F3DA859FD11FAC9659B
-:10378000093A15942DEA8F90EF4135083FA3CB2DD0
-:10379000455326107C74DD1C2FC83CFFDD65F9A065
-:1037A000DF89DDB7ED29A7F78E265BBCF0AF8E89E8
-:1037B000D05F27103DE6D5DF6DB77A305F339FEFDE
-:1037C000B1E87CFBB88C032E0C9AEBCF970F357ABF
-:1037D000DC49F48EE4AB68FA53BF57F96960654B76
-:1037E000A7DC03FB67C17862781ADFE0D0DD76E101
-:1037F000BA987E028C576B8208A7D3F89A6E8BE733
-:10380000F8CB90A5A3C5A7F4BD72AB3BFF3734CF6F
-:10381000D94EC51D70B7C6D59B766654409F6E7253
-:103820005BBCE4E308F7A0AA839903E04F8890DB30
-:103830008BB8FEAD2BE1F72FA84A60FC2C14418E0B
-:10384000CBCF5EEE68958FF4BF92D551E3591351FB
-:103850004FF358B0CEDC7ED1C61F1D91B0E1970E5C
-:10386000A95FAF62BE73F571AB8189AC9787E8F150
-:103870008ACFD094F4CD13DD8A76E4D27C87AC195C
-:1038800025EBAD4E5DCFFAD9CF2B77D93D2CCFAC00
-:103890006FAEE4FD1D5A87D00F87E2E7FD0AF2EE16
-:1038A000B453B81D3EB4D7183E9222FD42DEB7A0F5
-:1038B000F6A7D729ACD7CB53245CFEA812440CB88A
-:1038C0001C415BC08FC9386D998E0FF0893F623EF5
-:1038D000A057242CEA8CF87898FDDF8A2AE1851D10
-:1038E00020888E7E036FBC1F15B61F859E0D28A1F4
-:1038F000077CB0F7CCDFA9DCFBA323123E175F26C1
-:10390000D2D5F0F7838C47D52EFC90E3EAADB16CAD
-:10391000B7930288857EB7E9F6B558156C077DB573
-:1039200006FA8ACA15BA1D1EB85BEAAB3549FE9E77
-:103930006ED4DF9DE1051EAE5174FF16767D12EC4C
-:10394000EB7DDC6FB3E2766F48427B11884965FB03
-:103950005AFA09FF5059DF3593FDBE01F6BA2F140C
-:10396000C678D6DC9BC5F6FA7386DEBB3346DAF33F
-:10397000E7DBDD6C5F897BA4FDF8A1E0BEC555DD0A
-:10398000B593B934BF396A116F46952CF367E0BB24
-:103990002593ED16D0432CB8B87D914D56D97F3381
-:1039A000CD17F1FACF94A28396483B58D70FF9056B
-:1039B000FECD7A3B2FDA9558DE643C9458841BFE8A
-:1039C000FCA6B3AAB012BCA9CE115C46AF9474F5A4
-:1039D000F75C9C8DF7647CEAB04FCAFBB801C21F4C
-:1039E000A4D239407ED739C0622AC5181967F92C8C
-:1039F00046F2E10C5154C8FB031E29EFA3E7913AAC
-:103A000040EABD127B83793C1FEF67BA90CE732FDB
-:103A1000037F8F9176C767D72BACCF693E3DDD041E
-:103A2000E7FF2186E38B9FE9FAC8C02FF14F1EE222
-:103A30006886DC4AD2F965CDEDC1AD3184EFBB6D4E
-:103A4000C437A01BF1CDA6014C77B60BD74C4F6302
-:103A5000BA5FA3D355DC19CF741B6AB1483CDF9918
-:103A6000C178A6F6E2EF786FAC47DAF317E9871171
-:103A7000DDB307E49DEF8F19F416D660DE3FDBBFA0
-:103A8000297F7AFB9E00F1FFA23FDD9B20A8DD97F6
-:103A9000D6BA342FBD5FB66945829FCAA3D640828D
-:103AA0009BFAFF32A88E0BB681EF453ABEB17FA0DC
-:103AB000A461DF55CAF1AF1EFFF79537D338BF5564
-:103AC0004433E463C5AEEF57DE4CF33BE87736434F
-:103AD0009E1EB5361642EE2E2C7655D578B17ECD8B
-:103AE00071FC458FDD9BE6617C07322DE9BCFE331E
-:103AF000F15EC5469B177E5DC53BAAD783752F9A9D
-:103B000057627CD1EF57863EB503FF6E8B68EE3867
-:103B1000B48D7AD1C872BE72D7EFBE5613507EF9FB
-:103B200021FC8BCAA8FD8305FAFE4AF43EC2350388
-:103B3000E2538F2040AEEF5F137E388F2140E3EADF
-:103B4000C1EC22E3CEB55BEFEFDF04BB61E3AB0971
-:103B50004A76EBFE81B1EFD2129AF3C8B39E0BAF57
-:103B6000CB937ADCB8956E528E79F6D2C0DA0B041C
-:103B700018B82CB3851360EF97ADB7B11C29DBFEE5
-:103B8000E8E607C06F1F38BC3D3C804FDB210FCA01
-:103B9000147FB3C2F25D2428F9ADF42ADDFE79E189
-:103BA00083B0AF3354319EE8B5E8A933B2BD5F347A
-:103BB000C750FBD29D4D85F00FCA345795B30D7A8F
-:103BC0008D0EBD686F74B541AF505321C7A9B67E45
-:103BD000C7F4F8F20545B4CF3AFFFD05EB3FB70B4C
-:103BE000E91F34A724497C41DF5586D4627BE2F982
-:103BF000EDE9FB139F1DC0F56EF82B3F45C721C0B3
-:103C000005F37BBC4882DEFED0111C0FFAEE589201
-:103C10002088FFBFB05649BE7F68451AECBC05B688
-:103C2000409A9B4BF97CC1C337323FCE57AAD2DCB6
-:103C3000D9CCEF1996413CDF0CCC73EEBAA93CCF3E
-:103C40007942637E5CF0905A14A4F28C558CDBD9D7
-:103C5000C6BAF94C5F370E717D7FAC9333F425E81B
-:103C6000F12F74BF3EF096F4A71D627262E47ED21B
-:103C70006E5D2E0644F030F44065838DE314EA9BBC
-:103C8000670AF19D1BB2AC55C8F7A0F907747C29EF
-:103C90003F4AFFC583BC874AFC45FA74F49B63DB4B
-:103CA0003766E3FB2DF6EBA8DF6FE0277A4DEF31A7
-:103CB000DEBED8E088552EA5324DDAEFD1F348C9E3
-:103CC00033D6BF784B44F053E5962F989F44BA2AD9
-:103CD00012D3258CFD0BF76C575522E1ED9B773EF7
-:103CE000B523FE1D48B5881E186FC3E70C0B6F3B4C
-:103CF0000FDA1BDFAFDCEB10E1C875BBF1F3A87581
-:103D00006DAE17A28AF15929123DD0DF5FD89B0B07
-:103D10009F433FD4EF26EA671ED95F61937DD55C50
-:103D2000F820E4C95EBB9BE30F647F8623F8E6DCE2
-:103D3000FEA8BE2F385F9707D17888960F87A3E437
-:103D400083F1BE58D7F67E54AB5C08307DCB6C2235
-:103D5000003BA3EC0307EB8FB2ED723D0A92A73D47
-:103D6000687D1CDBB6FFAFD7C09F0DD952C773AFBC
-:103D700066F9BBE0C9CF795E7308FF315EC8DFEF3B
-:103D8000ECF07FD3478B66078DFFD86A9F1D7C7F41
-:103D9000DE3AA6E76DAEE3D50ACBB7FFAADC257CF9
-:103DA000DB616FFDD47A9D7F01B91B9367CE1B3A0F
-:103DB00023B21387A2D25DDC85F70FA2F06BE0354A
-:103DC0005A8EAE1FE09171E928394AFFFE2A22F08F
-:103DD000284423F3F1B72417B10F57B1F17BD66B09
-:103DE00084D66607F17145F06B865740AF31FCE22F
-:103DF0009588579E3F6F333EA3EB5F05EF139F15EA
-:103E00003D6363BBA0AC5EE639D27BEC7754225EA7
-:103E1000CFADEB0E66A646C2C1283814D5DE1F050D
-:103E20001745B5D7A2E02A53FBB2BDFBD9CFA2718B
-:103E30009BDA39965ECE7EC8F9764590E751B9EBAC
-:103E40006B7B00FCD1B1D90EB9685B2602F1F47E20
-:103E5000F3F32ADBBDA73CCD09B05356C4483BEE73
-:103E6000945B87930C58CC2AA6719C0AF47723AFF5
-:103E7000A03946C65B4E1535272445F8ED4DF56A49
-:103E80008287DA3706C5B8B6F3626A99CE8DE24208
-:103E9000F5D29E1BABFEB043E68B5A8583FA6BAC22
-:103EA000F96E07E2499F91FF04FBA5A4E6EA04EC42
-:103EB000BF9CAAEF76C534F881AFA89CF325027E9B
-:103EC0003BF226E648528AA32270DF309A9F1A3FBF
-:103ED000E0E073F0AF8851B0FF59B23ACABE114565
-:103EE0008961F8D36BA2F31B8276D837F349CF42AE
-:103EF0001E2D5867AE5F547F8CD7CBA2A8F5A2E9E0
-:103F000071E3E8F55269AC179FF0E9F9969CD77711
-:103F1000EA90CAFCD5B2DC2656A6CABC5AE4A3B4C1
-:103F2000D4CB7C9D96BD1216013D0F485FB706DECF
-:103F30008E633DF5BAB0DD727CF7BFE5FF06FCB3DA
-:103F4000E7A3FE0F52797CCF073D9F03FCF47B9DD6
-:103F50003F12E7B71FFDC2F733795C2F3804C675EF
-:103F6000EA85973BC3DE38F5AC83F3114E2D73B071
-:103F7000BD1E78219EE316A73A497BB8F6F9EFFA01
-:103F800037B23E5ECE747C20CF2EEDAAFA7F67FD5D
-:103F9000D852EFF0601E952FC4F1BAAA7C3686F78E
-:103FA000D54E3DFF5D7E643CEEBF3A1F631FFE545D
-:103FB000BC98F624F857B7FF2B9F1BFC680DFCE557
-:103FC0005D2FDAE720AFE4CFFFD11FF2F5D4932FB6
-:103FD000B2FC3D696B7C18B1CD4D79E1076C831162
-:103FE000D7A38F75106244BEB83690DD165E241ECE
-:103FF0004E111E302FC2CB02D8E517C2473DF0D17B
-:10400000EE5F111F5FCF94726EA0C0BE4F2B5E1487
-:10401000BF7C1ECFF12A9ABF7CFEC277FD21877E2E
-:104020006ABE1FFE7F36DFB3FFB2F395FC1EC8F3F6
-:10403000F038A3F9FE7CBE7EFA570CEF88F7F278D1
-:104040002F72BDA7E7FFABAEF7FF197AE7FFCBCE24
-:10405000F7A7E8FD8A4EEF7837F6414F3DFF1F9DE9
-:10406000C5CF98F7D4FFA5F336ECF902D57BC84746
-:10407000ED5F15A177BC596C95B4698F2CD3F3050E
-:1040800085EE4F8DC65F1EB4CF591EC27A207B02CB
-:104090007E4CAD2BE7C09B04BF4C7682CAFBB2328C
-:1040A0009EF472BA2F28E3BB5502F1AC82F7E630DA
-:1040B000FC9AEF1707905752A8CA78CCFE1AEFC6A1
-:1040C000069AC7FE248BA796E0311DE77CB693EADB
-:1040D000DD1D5437FCB3DA8EB94E4FC4F8C6B8CCE8
-:1040E0007ED6E5517ED22F3DE6FA71E2C954ECD777
-:1040F0008DCBB6099CCF2944FB08BF52CB77F33C4C
-:104100007F29EA96BB5D3F1F4FA17CE977125E785D
-:10411000DF26D051D5F3E2CC7813C05B2AF092CBE6
-:10412000F67B40780FBC49B055B7AF84BEFF58E866
-:104130008CDF0C3FDA210AC24182CF78AC55686F20
-:1041400015E40FCB79B21F1D8D37A1FBD5569D0409
-:10415000633A8E0E03CF78DE25DDF43ECF3B1ACFD7
-:104160003F1FAFFB3A2E015ED3E3BD41F045C7A729
-:10417000521167AD253C2B4A2B3E0D3C45E37D0596
-:104180008D55F297C47747ABCF8A75365CB7E7C7D2
-:10419000589324DCB1412DE2F517947CFD8DD70AAC
-:1041A0007B7E942B89F349857ECE42D5F7C39161FE
-:1041B000C7E320FF1479B95758B5703EFCE6F16E9D
-:1041C0005100BFB5408410BF55EA5FFE1EFE11CE00
-:1041D0009714F1BEE6C1F701F772BAC2F007C53A0B
-:1041E000EBF1737632E2FE51E72B260EDA390AF450
-:1041F0009ABD949E218EE5F61CC47A2CBEC7E101BF
-:10420000FD3A5A1BB89E7C2D77CD60EC5687188EF0
-:104210002D214B3F03ED5E1EC5ED9708B7928474C8
-:10422000BB9002D8E596F96AE4BC7E0BD8BE3CDEB2
-:10423000532BE32602FCD41D65577C5FB64F1F430A
-:10424000DF43BE9BD0D85E8EEDCE9120D15529E2C2
-:10425000FDF72EDD645E44F30A07FB3BC5B775EA44
-:1042600009B934BEC01CB7CE1D28F7878D3238502F
-:10427000CA11D5E24DC777662FEFC3FE971A5B547C
-:10428000BE1B78DC11C77C5EBCF2BA0979F4FDE292
-:104290001D295E0CF3AB893BF365FBE937BE4BCFC1
-:1042A000B52D31FC7CFF40AD391F79068A67E66E7B
-:1042B0007A307BEA7E7B3A75A185269D40DC71626F
-:1042C00060E7EBD8E79C78A5CAED27EAF99F627909
-:1042D0001CEF9B4F087C6D4DA7EF4D20A706F54DB9
-:1042E00031EECED7D3F88BF578F30FBABC52638595
-:1042F000F6A40BE3EAD4B32B3D9F20643E74F4BADA
-:104300001D3450B6EF32DAEB49057E9418F786017A
-:10431000ADEDF11D7C77C44019E772E8A501135E8D
-:10432000392E5EB2CAD1D42D01A52DDC8BCA5F0D0A
-:104330002E881B48F5E3BB8AC2B5F8EE4DAAD8C05B
-:10434000E36D2EE6387B7C6F0FE8A0893ACE3712FA
-:104350006B7AF07E4ED328C1FCD3747796416FCE32
-:104360004F32FCB9A651DE83C8DF6A1EE5F46EF059
-:1043700022BF2514461CE5F05AB95FD3A536DC1DD3
-:1043800072B6D927F7413E5F9AEB019FCCBD774AC1
-:1043900002E4E79C356AD8017E5F6DCE5B126E2F1A
-:1043A000E78DCFA91B6587FF5AE2F2DB312FFF2093
-:1043B000AD17E6619C8BBC0463C2B99FBAE2D7E03B
-:1043C000F7A909B49EB1FEAC9E04F8D5D1794F95FA
-:1043D0007A7E9301DF91A679F1BDD9899E1DE08F88
-:1043E0004F9676E3B86AD540297F8535DC1DF8798C
-:1043F00098D602D6E7A7F992FFC627BB7BBA987F6B
-:104400006304E6D56473F7043F37AD88B1004FE32A
-:1044100097493EBEDD2AD757D0EFB10490C7A9F324
-:10442000EF8C1A6BD17AEAA7A35358E39385786A85
-:10443000B0E6C03826046A0EC3BF9EA3EBAB39AB0F
-:10444000E5F9B12EA3255D85B5614C0A3D3FBA293A
-:104450002B0779F106DF3C35B8E01703F35AE93F43
-:10446000BEC05FD88EBE33DEE269811C2EB95279A0
-:10447000B19BE483F1E867AC5ACFEBBC85E48423BD
-:1044800009E7061B248C7C55C88DBAFBFDCE08BFFE
-:10449000DD2E7671BDBD44E6A376B1876B38FFEAA9
-:1044A0007AE15E46F066B223AC3621B6543BB97C65
-:1044B000BC9AE45D0F21B655A733BCA3DAC365A847
-:1044C000BA373F7FB2DACBF0AEEA410CEFA9F63350
-:1044D000BCB77A1C97CF5617F1F368F933C7358FFD
-:1044E000E589BB27D17AF0F97C33D343E382FC71B1
-:1044F0000AF76D38AF24A4BC4BEA2DE58FD0E55107
-:10450000D73E82CFDF54811E840FDBAA51163EEFC7
-:10451000696DCC00DF8D558F6F7F1AF18E052ECE21
-:10452000CB6A118DBC4E5A84C51B1820E58F83F8C9
-:10453000AECBADE3B222F3D4AF5DA0086B047F5DD8
-:10454000571523AC11FA69D6D224133C63E9DB2F4B
-:10455000B5A7EFF7EAAAD5802E876F3DF2D07BF49E
-:10456000FC915BBFEA21CFF5FEB03E32EED2229A3B
-:10457000256C75F27EFC233767A4A57495DF03BD17
-:1045800066E30F0FE8D3FCE56358872B54EF3282C4
-:104590003F047D089F1FEBF4295ED16DE5AFB1AEFE
-:1045A000FD4EAF42DF397C73DFC241D4FE117D3F47
-:1045B0004AAC22BC46EA9974A9BF3E81FE4A92FAEF
-:1045C000AC0072342CF5D627BF4D0BDC86FAEB130A
-:1045D000BC3801A1AD6A1F984FF06A9FDDAB22AED7
-:1045E000572F56226E4338967645C066D6638D1D8A
-:1045F00093100F663D3612FB9E41279FD3A28EB0CB
-:104600001F33BBF73E9101B954A7B8B15F83739DC7
-:10461000CE64C83785F74791077425E9CBC707AA49
-:104620004CCF23F95679DE0BC97204C7082FC76730
-:104630004A56537BC8C73A9F7D5E84FC9DAD3F9F21
-:10464000D3DBC2A5F1FC197C0FFB87AB7CD3C01F69
-:104650001D509F8D32671AC6D7C155685522F67F07
-:104660009F1A68D5FB97FD1680A8F4FE1DBDBBDA26
-:10467000E766F3F92CD65B463FB37BE7ACEC0A7DEB
-:10468000BD7A14B0236A6DDEF4546A577FEE3B6E38
-:10469000195F77CAFCECB20BE80D234E77147FCA82
-:1046A00073923CDF453B9ED88173128B3E72B0FE05
-:1046B0005A74A9D44B223B983F85039AE6B8F898E0
-:1046C000274E1CBC8DC67302E79810EFDFF5A91DBD
-:1046D000F9A1B46CAA123300AB4DC8338D8ECF1E36
-:1046E000D8F151429B71F15DEAC5C5C5951F12A075
-:1046F000178CF98C7DFE4C1AECAC4AE52CEF335547
-:104700003EBF22ADADFCB0E8B8F8B9F8B958FDB578
-:104710008A38F32D47DB8C9F47C7019B0746EF473D
-:10472000B80A2027CE1C5283D84F6F09F648146D63
-:10473000F46FC4CF2BD7D24B2958979E44EC879D5A
-:10474000BA805D9E3748DAE527F478FBA96D2AFB2D
-:104750004BA7B6C507619F566CBBE720F6292B36E1
-:104760002A6C9E978B06C617E1513823F518F2DDA7
-:1047700052605C7B1221AF8CF1953E115F05BE5AF1
-:104780001852FC9B681C2D4E4F62BB8871240D9201
-:10479000EBA2D411CA67BCEAE3760C9272D068B778
-:1047A000B0FE1E8E4B53BB936CEFFC294E709EA047
-:1047B000687E1DE33BB62ED78B7DC585A19D159CDC
-:1047C000DFB12DCE8D38C4577A9EB3F19D4E7A7FDE
-:1047D0009D0649FBED98BE7F776C873C9F8E71628A
-:1047E0003D7DA598F305BB0D92FCDF6D90B4875E0F
-:1047F000D1D7B1D17E61A829A13BB5FF62EFDB5CC7
-:10480000F6D3FB59E86AE80FBDFBC5AE38DE8FFF73
-:1048100062D7838588339F088D4A05FF1BDF1F3AC7
-:10482000C826E9B04E1D077C89A0CCB329075E736A
-:1048300023C799B23E9015B9CE64BED1B15D4F2564
-:1048400058B25BE958EEAC72E27C68E5AEEB8BC027
-:10485000C7AFD8243EEDBB260570ECB992D42DF439
-:1048600004AFB30C6EBFCA12D1CE61F3B3F0B3ED97
-:104870002DF6A3BD11875EBCDBC6E70B675EEAB908
-:10488000FA5AACC3576D4C87C57D3C57733E528373
-:10489000CAF9CB8BB34418F6C7929BE2D7633FCCDF
-:1048A00018EFCC5CB9DECB5629C24FF32A0BAA42D3
-:1048B000A3B203D13D801CA5F4C63CE44F36650588
-:1048C0006FEF99CAE77DC31B525BF34C691DF7C4B8
-:1048D000B9C89241C93CEFFBA617B2BE3B6C1701A9
-:1048E000C885C093320FA7ACABCC8F7E007C8FFE07
-:1048F00092C33D5308AFC775BA964D0EF7445E4656
-:10490000D993199C9771DC2EF74BF11CFBC56539C7
-:10491000F43EB54BD5F379F17E52041F95CDF67A6E
-:10492000D04E4DF67A7C2E8CD77D92EDD6DDF102FD
-:1049300076ABE5E9783DBF2A86F3C88DF796EA7C29
-:1049400097AAD3535C23F331EFB3C97CD5FB36650B
-:10495000F0FD1846FBFB6CDA74D84F9807ECF58530
-:10496000F6BA9ED87731C6BB30A18EC7795CE7F323
-:1049700085B175322F5C3F778CF6809BF43CF6E670
-:10498000AD0ECE5FF92AA3E15B8CF7ABAD7D900352
-:10499000037CCFDBCBF5643F123D173DEE08A3FE51
-:1049A000CBAD326EFDA52DF82DE4F0970FA5F0F9F3
-:1049B000A82FDB05F3393F40715B609F7DA9E8B00C
-:1049C000CDCD7665173BC1D43E35565890BF336E7A
-:1049D000F2DA99C86F68D9E8007B8AAF36DF9FC6E4
-:1049E0007E8DF024729ECD2155806E5F3DFEEF7D61
-:1049F00022ED17A35CB4D19C77D79425ED4AA37E12
-:104A0000ADBE2ED70E927EC7BA41524F95C785EEE6
-:104A1000EBCAF393F826FAB07F470A3E9EF327B617
-:104A2000F75020371E10C15F7D3480BD6C0FF2E659
-:104A3000CB9EDCFA3AF66BBFB28806D81FCAAD5BD4
-:104A40007E85FB3952EF4A643D24C4469EDF976E53
-:104A500079AE95162CCF7F617B092F9AB2A527E0FE
-:104A600083A473145A5F8B2C0AF7BF684F3FCEB7ED
-:104A7000237A58789F6CA7AA8F876C4AE06FB3CCD3
-:104A8000571E9F1CDC0C7BAFF9A16E02E7DDC7AAA5
-:104A9000EBFA837EA737C659C04FE5B70D4D1C0A08
-:104AA000BCBDA10AD81FA7ADDEF6917184687C4514
-:104AB000E7819FD0E55319AD3B9CFF2CDDF310DF60
-:104AC0002F520ABE045E1E57781FBB74E5D0FB99B7
-:104AD0004F5FB7891ED4EFF1D03D0991F4792FFAD9
-:104AE0003B762FB72FA5F6F2FD5713789C9B6D9C54
-:104AF000D7124DD78B7EFF71F5A2DE3F37FF10D95D
-:104B000005FDCFC7C369D1F0AB8FE8FBDF6C8B61CC
-:104B10007F903C003EC776CC169A87791FDB1EC378
-:104B2000F2EB589294135F903C0DF4C2382EFF3D87
-:104B3000F3E95B53F8BCDFFCA0F9BB46BF1FEB7287
-:104B4000BC3CC59B08BFB3FC0D290F895E57F0FB29
-:104B50006FD8F8FDE8793C87F7DA45ACD3ED71CC36
-:104B600017C73A487A1CDBD18BF55353925B30DF81
-:104B70006CB5C97A5BA833ECE063DB7BF96A23BED2
-:104B80007B2C29D4D91DF1BCC9165C3950CAD36617
-:104B9000F8C5228C583CF28B04C73F8CF74A9DAB7A
-:104BA0001B60A720BF373F87CBB023F9FC3CDDF16A
-:104BB000C9D29F1C3058DA0F9CB39AA6E793B3DD95
-:104BC00013B2438E6BBA7D58B62D3ACF57D6A7187D
-:104BD000EFD3BA4B35F28A2D186FC89ECEF106E19D
-:104BE0007992C65BBAFCFA85C81F2FADBAFB5AD8BA
-:104BF0004FA55631CE4EE36A52541E47538C98351A
-:104C0000197664643F11F65BE7C1E7E2B4C29DC662
-:104C1000762BEBB7AE83A5BE035C47DF2B5BAEAC58
-:104C2000C6F70DF9C281C2B4563C21AF15F93D4D0E
-:104C3000A3F4FA0BCCBBC926EBA3E76D8C277FB09E
-:104C400094534D599EDF0F035DFEA2F2F9AED33FA0
-:104C5000E42626B761A7B5EA7B7B6B9E2D8D1F6787
-:104C60006E595F0F96F2AE94C68771F65C67CE2BD5
-:104C7000EFBDD10C5FB2CD0C67EF32C3FDEBCDB011
-:104C8000F78019EE8B7EF3A49F8D73CBF0B351C2E6
-:104C9000CFF638A49F0D187E364AF8D9780E3F1B00
-:104CA00030FC6CC0F0B3011BF886BF0D18FE36EA6D
-:104CB0006FD0F124FCE134E46B5658649E2FD1C3CD
-:104CC000CFE798A6DB4DE7524E3D2FCFA5103F48CA
-:104CD00079BFD0C5EBE401B4180CBD24D753EAB3B7
-:104CE0008EE032C4773DDACCC158AF6BBF9E07BEB1
-:104CF000ABE8DAC879AF4D2B5EEE790FB56B54E2B5
-:104D000005EC8A8AB55FCF841D95E6D14A06D37833
-:104D10002A631B560EE4B87D98E547638DE78D91B5
-:104D2000928E1C7F2956715306D52F486E337F28EB
-:104D30003AEF5CAC36E799FF54DE79341F1876E021
-:104D400023B6E60C37FBE9C31E469C77B112EF860B
-:104D50009FFE698C5886FB8302AFC83CB5964336EC
-:104D60009937B05AD92022EC93653ABE0D78CED946
-:104D70005CB6C7CFC1AB158BB85488EE5A7313FC21
-:104D8000EBD30B2C6C779F5E5050D80EF61FF96555
-:104D90005813B89F2B72BCB89FCBC43F5B92A3CE75
-:104DA0004D7430B5C7FD5CE673139798EAA7ACCE97
-:104DB00035D597140D35D57717727C4B16CAF195FA
-:104DC000907EF0A7005EC6798B4B403BB2533A2BE6
-:104DD00081952C97D72B7C6EDCB3745521F0729C97
-:104DE000D8197104836FE6E8FA45580376F0DD9927
-:104DF0005459FFA5D270E4367AEF84AF6E33AE4ECD
-:104E000039615977DF300FF2EBD77776D33ABC416F
-:104E100009A541F4FC7E80B61D7CF399B57112EFB3
-:104E200027EE6C975C03BBF350DEEB83D0DF369547
-:104E3000F3260C7EE96C9371BAF5838866644FACF7
-:104E4000AF93F9BCEBEB5262BB47ECBF18F36C01BC
-:104E50001D04CA6569A91C17120D9807D9EDCB600E
-:104E6000B79D3E24ED76633EDD97873B2EA1FA1B6E
-:104E700076C6307E3ED3FD86E37D5EECEFC1F98DD4
-:104E8000EABD9D55D803966D9BE147B852B597B0E2
-:104E90004E16ACEFF11EEEF75AF4AE2A709EE6F312
-:104EA00035A31306D377BEDA6EF38E27F8B6BA476A
-:104EB000EDF09317598376CEC3DCBADE8EBCE45F87
-:104EC0006C59CFCFE76D29E6BCCBF9A28AFDC8A308
-:104ED000FAB92C63DE0B0A94756EE2AF5E43241FB1
-:104EE0002E8895FB79C4CF2F615EA7B7283ED88F57
-:104EF0005716EDB417D3F3C33ABF7AA64D1B0BFE7A
-:104F00006B09C9FB395A5E53E5BD6357AA322FE6D8
-:104F100002F7F94C399BC5FC7DE5D9BEEC674D0D18
-:104F2000F7917E6CB6941F2DF52AEFC7B5BCB63F3E
-:104F3000750ABE576FE3DDBB05F60679FEDF22AAD0
-:104F4000708EC033AD41F25596A882FDB7E42F6F45
-:104F50001FC4BA5B92E5F4603D140D534DFC593902
-:104F600026CEC4BFD344B2E91CCD55482A8980AFB0
-:104F70001CDFCDD4FEEA2BFB46C9839CD67A96076C
-:104F800043A2CE011698E0722A6F817C129799DEB7
-:104F90002B17935BDBC11FDE28EDD6F25D491BB0FA
-:104FA0002FBEC022FDA1699A7C5EB1573E1722F642
-:104FB000DCB9749CC7477CC0746E5BDFE743BF1CE1
-:104FC0000FECD6C0719DE60C929784D1F2DE8D76FF
-:104FD000C4D3C85C6E469CB43C4030FAF58BE65AAC
-:104FE0009C1FB14AFCBABCEEAECB325AF9A2629712
-:104FF00039DFAAE2D0DBDCCEC8678CAE273B7D650B
-:10500000078C7BBCE2E37393DB9AEC88075DA975A0
-:10501000E47B29A2EF4B2B0B35F138A7EE4D7363E0
-:10502000DFB622EA9EB485433C523FE9F17FDC3390
-:1050300024ED8406BB8CDBBAF65978FDC97B79CEAA
-:10504000F1E5028BBC2F200A2FE37DEF727F1D322A
-:10505000641E1AF0628DC04B341F014FD6083CCD40
-:1050600013124FF3489A0409EE003E8BC4CFCFC40D
-:10507000D77CFC41F5F3F72A41E4BF45E3679ED6B0
-:10508000C8F89BA7B9AA82EEF3E75371CBFB0721BF
-:105090009F7664C87B0DA3F1375F34AC84DF3B9F00
-:1050A000F4463889F9C2EE643F4DF1426F7B063514
-:1050B000DA6D529E719CB7E5B5B779DDB578695563
-:1050C000832F04D5537B97DFD3BCAC8D3CDFC967FE
-:1050D00065FCE4AAB3562EAF1C6F5E7753CFA6F1E2
-:1050E000F39F8B970AE0197C8EB85E421BF7EC2188
-:1050F000CE9770FE7C8DFD10430EB7DA75E6BCE5E9
-:105100000BD97FD171C21B87E871C23C9167CA5B22
-:10511000BE80DD119DB76CE8F11697D49363D5EC92
-:10512000373C34EFE25754F6D33DD3C659F8FCF878
-:105130002BF27E3C6DC59926F0A7166F6139B83801
-:10514000BE2BDF6BA1E971BB73F6764D4A1AE27F85
-:10515000C5316ECEC72FAE518BA0BF8AA99D27A2A5
-:10516000DDCAE5DD3A432F7C727BAF8703B45E3E38
-:10517000B929350D71FF4F57D85249729E6BF7C947
-:105180008AB19D919FF1E9DD8E69C136F0F3D010AF
-:10519000195729BFF57DD65B272CAF254CA3F7CB3C
-:1051A00056EC4E40DA7FE98AB7F3DD6452F80668C0
-:1051B000EB86E421BEB77EB31BF872AFE7FB04B603
-:1051C00093B8043E8A57AC60BA2F52E47EF50D4A7C
-:1051D000F8C8486A773CE6EE8469443F8DFE87FD57
-:1051E000C3331BE3F5F368359C37743C96EC016AD6
-:1051F0007F3446E2F3E8CE782FDF89E10D7466FF55
-:10520000AD9DDCDF29B5D45F85F14C4CD5B60FE1FF
-:105210007DDEE0E67495DBF1B975ADA647625BF122
-:105220000FA3DCACEB69D8DB28616F235F06F63691
-:1052300060D8DB28616FE379E55AB3FDF6B2BE5F53
-:1052400068C483BBD436FB60EF060A44EF2AD6B3AA
-:10525000E30BFE08BDF58AB4179628DE558D6C2F3A
-:10526000C5D7C1EFACB54A3B3BF0B13C1745FF7A1F
-:10527000433EFD5ABDC48BFDFCFBE36E7D04ED9700
-:10528000627F6800EE3D25DB2B825F479E758AC8F2
-:1052900073B7A3C8088B84473B334CEDC7BAB34CF4
-:1052A000F5BF48EF63AAFFA5C767822FEF3DD8D4AB
-:1052B0007E82779409BE62D02F4DED27F92799E0C1
-:1052C00029E3A69BDA4F2D2A36D55F3D6DA1A97E35
-:1052D000BA76BD09BE76C14DA6F6D755D598EA85F2
-:1052E000A87A0CF8F107E43D6CF5F09F1CB8FFC5F7
-:1052F000C925D5FF0979CCA348D4F3BD2B7FB9F1DB
-:1053000011C0FB90D74C2B6ED8684B555B71FC1FBE
-:10531000747BE9EA61FE6F87B03FDDC0F7682276F3
-:105320000BBE8B1BEAD1FD5FF9BCA3D5885B35644E
-:10533000F07D0951ED2FD46E58DCBED31E62B92525
-:10534000431FB8CE4AF26BD8C07DB9DD08DEFDDC64
-:10535000C7121EBAEFA9AE043F3FB4C74C862FDD7B
-:10536000771AF5970F6B92F553049B262F3FB7E200
-:105370003AE4A70C1BD975B557C645DA3CDF6E94E5
-:10538000C013CE85034F28C3C4F728F711DFA33C11
-:10539000407C5F4272ED20F13DCA43E467E2F9FFD1
-:1053A000213F13E56BE467A27C9DFC4B940DE45F09
-:1053B000A27CAB7A1A97EF546BFCDE5FAB1770F9E7
-:1053C0007E75153FFFB07A29971F5707F879CFA14F
-:1053D000328EE022BD03FD5E813C18E40B44DD4BC0
-:1053E0002AAADC7CFF41ADAEB744BD9E57B38FFC0B
-:1053F00057E0B3D19A74C4D9BABF78617FDF2A8EDF
-:1054000044D86D5758FD3943998E1DDD2CF7F5E7CB
-:105410004F7AB5814389EEEF664DE991AB42DF5596
-:10542000BD944875EF5ADABE7F326EA8E497DEC3AA
-:10543000FCC3F0DE70E761DE4FF76490B53A94612B
-:1054400005F4577264FC72B8B5A116F5B5DF0B0F01
-:10545000FCE617E3FFCAFBE0B5642EE3FCB172562D
-:10546000FA2B23F4FDFBDAEFE5FEFD088C9DEA87BD
-:10547000BB657DED5CD2743ED487F8FB2370DA59AE
-:105480009E6F33E5ED8C39DB309AEB5D760FF24D94
-:105490004738C3F27B4EE1467CF9C5F83DB2FFB117
-:1054A000B2FF8DDF87F9FBF03E91973DDCD93A9E44
-:1054B000653CBE06793F5DB66C5FABB71FA151FF7F
-:1054C00049185F951C5F31B597E367393702DF4CA8
-:1054D00082B72DEB63D3E5F9E43167F57AAF9C6FC2
-:1054E0007BAB8471A604F599299AF0537F9999C2F0
-:1054F0008BF8DB88D4860C6EAFE733C45BE5F7121C
-:10550000BDF23EAEEE7FD7E47E002100E337F2929B
-:105510008C75DB29399C013BAFD3623B7F2F53DD78
-:10552000E983BCEEE3D37E0D7EB03A2D3CBF5ABF7B
-:105530003C2FFFE6F39E4EB88F74926EAFFF13FAC6
-:10554000DF82F7873B5F90F4C7256F99ADB0328F4C
-:10555000FE37B84DFA4B7C11BF60FE447FA607E8CA
-:10556000A9D35F31F0A3D3FF1CBD9645D6EBFC71E8
-:105570003EFD4392DE3A3F8D70CABC09B407FD87F9
-:105580005B253FD4C6C87C8F17E30B1FC03D5984F1
-:105590009B22C4E7871BFC5225CF0FFF6FA5FF009E
-:1055A000ABBC47CE51E6E47BEA7E8A1F66358B4270
-:1055B000DCD379CAA7C5615D179FF51C043C478CF5
-:1055C0002A84796ED49FBD40BDF64DB30DB0F1BCB9
-:1055D0004B8E6C67D45B9D6FC541EE19DF31DA8D60
-:1055E00038AF5D8E13FA62C9D8D03AE8AF7135563C
-:1055F0008E5B9365C2F021D267329FD39FE04B8BC5
-:10560000CCFFF41E583C00F78BCAF35BC225ED6A51
-:105610000FFD07B95AF843D172F427D46D56F81D1F
-:1056200067904F4BDF294C35DBE7E3A2F6D72FCB52
-:10563000FE82EDF1CB7EE29EEBBF0DD5CFDF64891C
-:10564000ACFFE43DA35F48F97C71F78CF616F5CC0E
-:1056500007638A653E17CDDF9283B88D5F54012EB4
-:10566000145556F0C1385167957EA5FF78C500F6F0
-:10567000DA193F978B303F9F400A05CAE40A621F40
-:10568000C0FBE326CEC0FDC1A3734777C7F388FBF9
-:10569000F37EC0F82A54ED6FEE88FBF3F68D91EBA4
-:1056A0006DF154196FDAE7ECD6A61DFA0AE9DBEEC4
-:1056B0003D8017C1E54BA48FBBD3BC5F267D0CF8A2
-:1056C000B2DE35BCAF5CE831E71D19EF5FEE1E2D91
-:1056D000AC2917D67797F77FA623F0FC6A52AF3133
-:1056E000A0D7AB4903C7201EFF6A527B8B2C1D76C7
-:1056F0002EFB3DDDBDADF119EBA3B5BF42EECFB83A
-:105700002F784C3B795F70345E2F1321137EC7EBEB
-:10571000F8FD1978ED352CEF7CBCC6E1B0631EF0C6
-:10572000F9F61E236F0AF1E4EECB1B18BEC126D793
-:1057300041F9D3130A9017BDF85D99DFF125860270
-:10574000BDBB74288F7FC4D2C1C29ACBFB5101E08C
-:10575000BBCC29F17822F0627FDC6BFE528A3608DE
-:10576000FD7FB14EE5F3F6279E8CE178DCD1E05366
-:1057700009C0A7C1C765AA67B517EBF05555DEB3D9
-:10578000F4C3FECEB887F4427C4DFC3C6A585E1BE5
-:10579000FCEC227EEE773E3F8B8DF21E83326761FA
-:1057A0009B7436FC4E678E3F0E7CE816E1EBC1FF22
-:1057B0001542FA4715CED7E43D9504E3DC6BB45DA2
-:1057C000951F4BEDA9DEEE94F9C206BD331DF21E06
-:1057D000CBCC38E1461C4468B997705CBE9B7F1AFD
-:1057E000C64F7EEDB6C8BCB511E1BEBCEF3CEE9035
-:1057F000CAF9EE2FC7CA7BDF1B891E0AD9A7BFE8EB
-:105800005BE5EA4A749C99AFCD198679A93FA8E86F
-:10581000F7B51E8A48E1F879AE8BFDEC9FE9AF97AA
-:105820000ED3FDF5FEA2FF3FFD3D8576F2DEE1C51C
-:10583000AFE40631EEC535A4D552F97731F89EB8FC
-:105840005AF8E759AD726784E8C9BF97313AD5C6AF
-:1058500079E6FFDB7E4F215368BCFEFEB3BFAB3061
-:105860004E3E3AEF77153213561DD0525B7F5723C9
-:10587000FA771532F5FBAC8547EA0FE3F714460AD1
-:105880003FE7E58F4D37EB95D1EE5107DC5C9AE3AE
-:105890003D993F91CFF5F8305DAFFC14DDCB854EDF
-:1058A0007779AE137CA0FF3E4A10FC69FC3E8A412A
-:1058B00077E377526ADBC9DF49F957FB5D9468FAF1
-:1058C00044FF4E4A347DA27F37658416CB781A5D3B
-:1058D000E662BE36E8348DFE637B00E77295FF7E9C
-:1058E0007A3546ADD33362751EEE293D552CE5FA67
-:1058F00085F4FF835EFF11C88B6F114FC27917A724
-:105900008C87F86BAD226684C0FD849C2FFBEB5A1C
-:10591000790F54AD55C603024457DC8BF75DEC3F5D
-:10592000E47D8E641FD93A202E53C5EF07EC4E77E5
-:10593000AD17F44E603E59BA549E073E6CA9E3DFA2
-:10594000BB98955DA560FFF268967616FDA78BA2C1
-:105950009DF3382E5F3510F27DE69F1D9D513FB3BC
-:105960008BBC3F526437E645DA233333F53CCCE158
-:10597000FA7EBC57E661A9C3655C2DDEEBE6730DCC
-:10598000C5D942CF6F159D67F6031F7FCC767C8B00
-:1059900047DAD58D36798F65E01599CFB3AEEA2D0C
-:1059A000B6FB37915DAB4AFB66ED9D1C674810D88E
-:1059B000C77D24A63909E3EFB55698EC853E41A78B
-:1059C000292FB9EF16B709EE174A37B5BF74AFC71D
-:1059D00054EF0BF736D5E71EF29AE0BC8641A6F6E7
-:1059E00003DFF79BE0C18DE34CED871E2D32C3C36F
-:1059F000BB4A3C8127693E3397B883F21E7D192745
-:105A0000E96297F654ED4DD29F30F2D7357D1D44B3
-:105A1000E7AF77B2CAFC757B95D46B9A4BFAB7EEB9
-:105A200064E156F95C4C03C3B81B82F3C603E63C41
-:105A3000F38E4EE95F59C648FFC3AEE799C7F696A5
-:105A4000E75E8CBC72F22BFCC07777D1389D7FEF7C
-:105A500040BF4F349A9F7FA1D33D7ADC5DECF23C8E
-:105A60005DED4D76DE3FD75CF62625E1FCF1540D69
-:105A700094FCBFC9D9F6BD4F53753E7B2CB768C2A5
-:105A8000702A1F26B5C5F6D779FD791B21EF6A7FED
-:105A90006BE7BCF19FEA6FE6A5723E332C965993F3
-:105AA000B2D91FE4738046BF73F57E7F39526973A4
-:105AB0007E33139BF9DE359168F7807F35D74A86B0
-:105AC000DDB122496D03EFADE732649EFE75AB4355
-:105AD00077F6A271CEB0D7D9E48503411BF8617C7B
-:105AE00001D991B43E5EDE33FC2117D1E3E1A55626
-:105AF0008E83950D7F6666A03BECCC66E60724A2FC
-:105B0000603F11F6A79AD33AEEA611328FFC4E5C95
-:105B10002CCDE7257EE071B5E8F19116113A777E3C
-:105B200022D006BF69AE837C0EC1BD58F253A78850
-:105B30007356F03FFFA7CE4B08EC90523FB63A2188
-:105B4000CF39FE04FE8C732A9EEB6D451B5C382F0B
-:105B500022C6291178F866848C5BFC79B8A437DA00
-:105B6000411E5DA81DD97D89D85F68119E44F74FFD
-:105B7000C4D5FF27E69F69957186CE4E795EA493C2
-:105B800055637961EFADDF73771EBFEB72438F937F
-:105B900075B4CA75DFD12BD7F5F972E1007FDFAE9E
-:105BA000C97BD3A2F1CBFF22E22AC6F995D83152A4
-:105BB0008E1872E1DC39941ED20FB5E9F221D8DDDE
-:105BC000C27907B7C59BD771B32E1FEE31F445805C
-:105BD000FCF87C939C10D8D7AB5DA1B29C2039799E
-:105BE00050A37116E35E1677EBEFC3CDBD57EAB154
-:105BF00011FEA2FBB06F327B8D4DACE77D05793F86
-:105C0000EC7C3D4E5E1C88BA9F45B7C7CFAC56DCD6
-:105C1000F8DD8839ABCCF5F35D473E86FF3837FABF
-:105C20009E1A63BFEE27E2008DC3757BCD2BBC7A35
-:105C3000FEFD328CEF4C50DE7B7DEEBC921EFF6988
-:105C4000093E25E15B8488FC1D09C32E30600FF6F8
-:105C5000C922EE6121FCC6F6867E5F6E6D33BFD130
-:105C6000C0EFB93C0F7D9F8ECA652BD89F91F90D6F
-:105C7000240F785FEE38D5C30E3C1E38CDED8FEF84
-:105C80008AE1BC9213BE86FED8BF35F6E9BA6B72C4
-:105C90001FAB6557BCCC6F705924BC45DE63BFE8B1
-:105CA000EFC1FEF0631B034F99CE39688DE67DBED0
-:105CB000E852ABD9CDFEA66F80163382F8EA98D5AC
-:105CC000EBF4127CBB6B1FDFD3359EFC47C835E479
-:105CD000A5AC4895E367F915382DF15725F17705FF
-:105CE000197A909FEF0A929E88630AF26AA92C0E95
-:105CF0000FE6FE7FEE3ED894B33EB9FF7B7628BF19
-:105D0000AFAD1ACC70EF60F3A8F7A9DFAB349707FB
-:105D100071A4A9B5BF1E1B0BFAFFD1B582CB4EE60D
-:105D2000F30346D97B84A44BA3ADEDFA3F8E90EBF1
-:105D300063CF08A1DF5723F97D718DC2FB6A8BC148
-:105D4000E380EF94F7731AF0E93A1D1E2BE1252B3F
-:105D5000240CD5043B78B6FE3B699BF5F80BE68F27
-:105D600012F3475C609B1E9FC1FC5162FE780E7966
-:105D70000518F20A30E41560C82B94905778FE7924
-:105D8000D268DED7C6BEDD9888F5847DBB3111EBC5
-:105D900003FB769130F6ED22DB63DF2EB21EFB763D
-:105DA00091F5D8B78B84B16F17D91EFB7691B018D7
-:105DB000F4CB561872CD3FC9044F217F604CC47A92
-:105DC000C6BE5DE4F7B16F67FA9E76BDE9FD6BC5AF
-:105DD00052D3FBD8B78B6C3F6BA962DAD72309C8C3
-:105DE0007A7DCEDA14E6A3645FD1BC1179FCBB5690
-:105DF00037DABAB27CE038C6E2F258AFA477DD38C1
-:105E0000497F8B3C1FA134F3EF0B9CBEC52EE1B143
-:105E1000E6FC6DA3C4BED7189BDCF742897D2F94A6
-:105E2000D8F742897DAF313DE4BE174AEC7BE139BA
-:105E3000F6BD5062DF0B25F6BD5062DF0B25F6BDC7
-:105E40005062DF0BEF61DF0B25F6BDF01CFB5E2817
-:105E5000B1EF85E787691C2511720CF67A77939F5D
-:105E6000497C68F233DD2618F67A647BD8EB91F52D
-:105E7000B0D723EB61AF47C2B0D723DBC35E8F84BB
-:105E80001F1BEE613D06BB3DF23DD8ED9170BFBAE0
-:105E9000C04B88AD4D5877F200CAC678E5619C3793
-:105EA0007CEC852B6659491F36C6289D9348A6DB96
-:105EB00094A9B3C640DFEAF98FFD45B305F24783E5
-:105EC000333980CF19725E69BFEF33B8FE65E35C8A
-:105ED0001CFE11DD7DBB04FFEE8CB1DF6EBCEF2537
-:105EE000B58DD268DF0AB7DD2EBA7FA31DE7564510
-:105EF0008C03279A9137E3BBC595033F64B345E113
-:105F00003C93CDCB645E74345F7DACDB479B2D3B13
-:105F1000F7E11C4C73B1E2C5B98FEE751A9F33EBF4
-:105F2000374358545FEB7C7A3D92C079B50746C839
-:105F3000389F317E233E4AF282CF0F0E6B6E189D42
-:105F400048EDB5C028FE1D9CF176693790A5310457
-:105F5000FE64DF80E2DF10C1E7AFEBDFD302721C2B
-:105F60008F3D3251BE172BDF7BEC9104EE7FE27246
-:105F700085F3CC866D137E9C537E4F97AF7DB7859E
-:105F800055F457BC5CF6677CB7785D673BCE731BF6
-:105F9000F82A168D63709FB418A0E04E59D1D3AA89
-:105FA000B15DDA7E86DB023BE862CF410D1F9034A3
-:105FB000167988A25EF0BDA11306BC699A2FA32BA7
-:105FC0001FBF832AD837D402D75BD0EF4442400AA0
-:105FD000E2C904633E9A26AAB208BF574D2B667CDD
-:105FE000F79E2114E0BBCF8CF596547AAFAFF6A2A2
-:105FF00005F65ABFBA462E8D79788725A980C7DB6A
-:10600000DC6331FEF16315961FD1793CB00F185E49
-:106010006E637D6ED80F8BE3CFE5F9BC873C9FD3D1
-:10602000876C9CE7737AF919AE2FDE1DC3793DDAD0
-:106030005A85E59A613718793B65D7BF9B0FFC7C81
-:106040009515DC9CD48DF5BC7D24F269BAEE4CC06C
-:10605000119CE3CB775F85A37BA797EF96BF57ABE8
-:10606000EFEF18BF7B2AB2FD9C0F66D88142ADB717
-:1060700047EEE318BF9F46F293DB9DDE6B77F3EFAD
-:10608000D7E9BF776AC47D8AFF927B10782D7E485E
-:10609000FEFED9EC5577174E23789EDF19C6EF62C6
-:1060A00045E7632D8CB2037FEAF74E3D23F5F84FA9
-:1060B000ABFDC7FC72E63569FF15FF65FF5469AF9C
-:1060C000D838EF7F468D8CD7899D82EF3F9A513328
-:1060D000DA827BA467ECF67B154FAB1DF8866EB7B2
-:1060E0004C3E9BC9F87D5BB753A622FF94F03BBEA4
-:1060F0003146CF57CBE0F2EAB3321F75B24BAEF761
-:10610000C66704DBD32D0187CC23AC177A7EAB990D
-:10611000EF7C82F883E873895FD98FB4E509B07B9F
-:10612000E87BD36007A5808F8B57205F96DE66BB28
-:10613000339A8F275BC357E2FB93BD36E6AF7FC62A
-:10614000C7B897E39C5C12552FE19CBFD8287FC746
-:10615000619A26F9BBAFCEDF33E3F4F8934BC697D1
-:10616000CEC59F3048C4CCC4D659C8179E89E48593
-:106170000E3C2D3FF2F5E2B365FD3523B7CE5A0E46
-:1061800067E6027109F5663BDF5FADB99CFC3B3405
-:10619000178A13203E00F978DD0D3EFBEC08F95814
-:1061A00030AA608D3F2FE2BCE3ED320F6AF1ED3D86
-:1061B000DAB775DED628E7107EB13E662636DE8871
-:1061C000F3E64B470AFF9841F27726E5BC4418797D
-:1061D00098D7E8F0C63F37FC6D958BF1C1F00D7F85
-:1061E000DE330BF7C7953B1B0BC16E95D955E3907A
-:1061F00077DD2A87347F6616E4D0A830E4D085E2C4
-:106200000E1B474A3A44C71FE6644BF92CF4FBC205
-:106210003FB9FDE91D90E7C6F83FB9C0EF63AC1B7D
-:10622000A9EB89EAFF9E731ED1E73BDEE8A3DD35CB
-:10623000B21D7E97C7DF843CFA0E6A9D9E3F2BEF0E
-:10624000F530E81B53F71DC73B4AF4FBF0499EB0FD
-:106250003F39DBEFF4D6408EF4162B715E68A62A28
-:106260009A79DFF83CBA4B3C3E32FDEF0B918FFB45
-:10627000C86F63E5791D1D7F33EC0D2F39B35AF1DB
-:10628000F7D1D23FD8A4FC0AF7C0BEDC3555319C0B
-:10629000DF5630AAE851C8BBB86C2FDF83B1C62FD8
-:1062A000F9C9DEB568339E97AF7EF161DC9750592E
-:1062B0009FC5BF2B53BCD7B712E71C0B46694F6075
-:1062C0009EC52E37DF1B52B13C89F5D3CCF67ADC64
-:1062D0005534F33E9C81F7037A7CEA9E51F2FBA78A
-:1062E000743F03827092A9DD85E27432FF06F939AA
-:1062F000883F6AAE3D1C2770DF2CEFA9B08B776416
-:10630000FC31BDEDB841A61E6FCCF0CAF89081BF3C
-:106310003B7ACF66396733E2B9E7F0673E8F69941D
-:106320006EBFD4EFB36F50D85F2D59A3F2B9F2B15D
-:10633000EA78BEC765F1DD8A87D7D7BDDD38DF7B58
-:10634000F1ED648D7970BECC53D87E00EE5B57DCE6
-:10635000B04B66801611F19D92B58379BD9504A965
-:106360006CE35E53A3BCF6EEFD9D9EF1808C7EDE59
-:10637000BF2C71FBEDC911EB7D4E9D62BA5FC180F0
-:10638000855FC6DB66085290348E19DD3D0AF6152E
-:10639000DD7E8987EB6EC8B2E3F74866D0972D396A
-:1063A00017EEFFFF95F2FF02371C2052008000001D
-:1063B000000000001F8B080000000000000BE57DBE
-:1063C000097854E5B9F077E6CC99992433E1640172
-:1063D0009200F1241088803861A72E1C1202130845
-:1063E000305940F086308120A1456F0497D04699FE
-:1063F0009085104143890D52D461F3564B352ED709
-:1064000042C57600EB525131486B1793617169DDDB
-:106410005228B5BD0FF7FABFEFFB9D93CC39990415
-:10642000B4F6FEFD9F3F3E78F29D6F7FBF777FDF22
-:10643000EF243F9DBDCC2632D6B54D90F7A4315602
-:106440002EABB6F14EC6BEC49FE98C2D6F16D4C0DC
-:10645000D89E727E3A5BE68572B4EA626C1263651E
-:10646000B2624B4EC3A76C8B87F7CBEF3822B14497
-:10647000C6568C604CC882F6F16E9B13C75F0DE365
-:106480000B8CDD2C0773B1FEE6B10AAB8983F67580
-:10649000593606F3F9B6F0797C8D71B66BA05C665F
-:1064A000956DC3A05C12CD18B687F505B07F795005
-:1064B000B5C53B715CB6ACD0C9D71B1FB6BE326D3B
-:1064C000BDE5CD71B69586F7DB2405CA4B1853DBC5
-:1064D000C2F6A73FA7AB02ED67795D416A2BACB767
-:1064E000DCEF9271DE72AB6A73E3BA705CE8B7A45A
-:1064F000A5554A0BEB7F8D6AA17ED355859EF9E9A0
-:10650000C10C01F77B7B941BD7BB446E96109EF9A0
-:106510003A9C1FE4705829073370FC950E0E077DD6
-:10652000BCF2163E4FEFF5717897B794D914A8BF17
-:10653000C5EA4D6D85FEB7C03AFDF05CB2E3488612
-:1065400080CFCA28B700E7C1645FAAD7D5D3FF833D
-:10655000076F4AA5FDC3FA11DE2EB7322B09D6B359
-:10656000A21916A3D093E62D9DC02ADBC2E0769334
-:106570006A656C203E2DF464CDADAA6310C083F132
-:106580009FAB6C2766E03E6AAF666C23ECC3E77C8A
-:106590007E06EE53FE2E63E23458EF96B7A97E4591
-:1065A000129305A8B7B1E704ACB795431F28337F12
-:1065B000AE1ACAE4637D99CED8301C19DA3B017F4C
-:1065C000FCC98C554E5168DE252CB4840D8771B6FC
-:1065D00014C01CB0CEC17C9DA50358E53311E0D595
-:1065E000A2ADF766EDBC4B2CEC2516DF537FAF76E2
-:1065F000DE2588CF61FD713C1C778D5E9F1DCCB878
-:106600007D6C4F7B7DDE9278DE0FE901F1708D8627
-:1066100007D87E2DB5E7E55CD1B9B11EF6B376ABF0
-:1066200018B00BF8DC5B3F08CB4F0B6E84FBC76BDD
-:106630007FFAE62278FEE907BB4B717FFA3A56FEF5
-:106640002D8B290970BE7FBB8E9EE5C1694C99D008
-:106650007B9FC7A6F8BEA74E0AC39FED3F19E983EB
-:10666000F93F7EF2F50C84F31F00074480F3BFFD71
-:1066700064AFC4D27BD6BFBCF16DA9CC190E2F81FB
-:10668000E0D594D94EE7B72293F75B51F7E7323C58
-:106690000FE6B4291969BDCFBFACEE69DEBECA4DA5
-:1066A000ED7DCE5FF3F34F61B2987CF9F3D6CFD78F
-:1066B0007CEE8F48DE609280E7D36CA07FF3FE1FF4
-:1066C000D6D61DD0E8EF660D8F6FAED846FD963753
-:1066D00096ED1561DD4B74FA2D37BED7CFE7FC166A
-:1066E00089CEE7FC968C86242CB7F1F3F98ED83648
-:1066F000EE6E68F7F19AFDB725A7E3AA03A9DE6B52
-:10670000F8F9B009FC7CF0B90ACE8725443C9FA774
-:10671000C2CF67D5A3FC7C563CF9C67B3F5308FF2C
-:10672000F8FEB6DA03C87F97B73D7DEA5BF07E4995
-:10673000E336290DDAFD424DA37DE9FD575466C9C4
-:106740002C16F6D7B85B423EF00B558988E73A5CC9
-:106750009995F399472438DB38AA67427C4FFB258B
-:106760004C1D8C7C84F987B2FD89BDD7FF278D8EA7
-:10677000F2D3DDB6C1C8BFEA63D81E19D751763F40
-:106780001BD7BBBDFE3C1BC5E96239CC83F47976CF
-:10679000863B15E9A2C46231D09BFE3CADD1D790B7
-:1067A00098B625B8DE21094CAE0510FF305ACDB69B
-:1067B000C0BC3FFC9643AE75637F9F82F57607931E
-:1067C000FD00F23D16653CE1276C795332C232344C
-:1067D00009F9DE8835A13FE3FA109DA2C6F3A70BA5
-:1067E000F66D9FC1F104CA6C107F1FC4E7306B1BAC
-:1067F000F1A9E82A8E7F36F60E956DC0B7106FF5B9
-:106800007E43D80901DF27C35A70FEA6CCE5747E0B
-:10681000D2084E2F7DEDEFCB2BDCDFD9345F80E447
-:10682000441493F7C4D1FED662B97B7F994CB5402E
-:10683000FFD2EF5DB3BB09863C5BA31EB541FDD91A
-:10684000F54EEAFF4DEDD7BCCF25E565867D76D3C5
-:106850004D33F0B5347C4E48C5759E77C044507FAB
-:10686000F6F6280BC2FF6C1AD717180BB90AE15CB1
-:106870001EDB00BFDA19FBD106073D9FD800C834E4
-:106880008AB1031B92A8FCE406859E6D1B32E97D4C
-:10689000FA0C8E7F25D16A2CCAE5AE1A97BC07E1A7
-:1068A00011E474D351359CE0007A02E7C79A5ED0B8
-:1068B00021875CF1617C1AE4C7569477AC6A38DBB7
-:1068C0000F5374349F7559C6225EF2F5E9EDEF90CF
-:1068D0009AD97A6CF79010D80FE3C6DCF176EE60A7
-:1068E00094D32D695902F45B5A7581F8E152E7207F
-:1068F00085A11C77FA1AA660FD8E347923748B6902
-:10690000C9EAA882FE2BEB46B9B1FD1D82D240F345
-:10691000D6086E9C177E54C764E003F81B94573961
-:106920005F1EA1F14B0BF2CB15F7AF6F4886F269F2
-:106930000BEB120134F996825958CEDF19E7AE45B8
-:10694000795BCBF7C376011F75F4F05175AAF7FA9E
-:106950001970CEEC12E01B8C3F1AD6C644DC4F9B5C
-:106960008AEB67A077EC67B85EAF0DFBBFA0F1CBF9
-:106970008E96D32E453B9F02A41B5FD7E94D78AE80
-:106980004E8BBB4941F9AEBCA520DC5F13D91E0577
-:10699000F187D7AF75F17A786EAC87FAB5BBC500D1
-:1069A000C223572C191442FD6B87487C71E5EEA277
-:1069B00041A86FAC8432CAAF9D3815E053434B0EEB
-:1069C0006FB72DF7077EE0A7A902F3223F3A670DC4
-:1069D00015203C3EDA3D38BE06F5BD5B6B4732A85C
-:1069E0002FDFBD29159F1FED8E5A8C7C7CA65C3055
-:1069F000330EF59F5D7159A2D243671533389D7DE3
-:106A0000FBD69CC128EFD6FCCFB1476490AB2B01DD
-:106A1000476518F7625B4CC00F4DD66C38982A0258
-:106A20006A39137D2B106EDFB11C5E340DE5B0109A
-:106A3000782C99DA2B83E54874ACEB5380C70AE0D5
-:106A4000E9ADF7BE4BE37C6A393E7F09F45F73EB37
-:106A5000B3B138CE771E3C395986F759137DFF8E76
-:106A6000E3FF49D8FD980C20613B768F43F95139FB
-:106A70008371BE1AEF5DB484C3D7BD47E97BBE8A7C
-:106A80008302C1532F2F0D0CB031D44B83CC26E39E
-:106A90005366A4077F24B22A94EFBA5EA2BFAFD593
-:106AA000E0F2D180E6543CFFD58FB5A6A2FCF8A356
-:106AB0008B977DFB5E59F95D5887AFC52233C03B8C
-:106AC0009F9591DEBBC2CFF5695601CC24B967FE14
-:106AD000AD336268FDAB774C30C83D908F34CF1F2B
-:106AE000ADCC83EBB8AAB62B0BF5A7DF5B832BF1FC
-:106AF0005C7F0FFAA93F0DCF89E3DFEF9BC559F803
-:106B0000DE7F87C032042C3FEB1AE1243DCC427C6F
-:106B1000FD0529B01FDABB26B60591EFDDFA5CDC76
-:106B2000780463AE387630E2CFDA43D2AC215C9F92
-:106B30009271F635D6A02DD2B97D5BD3A3BACBCF57
-:106B40003D6D43BC5F7300F401A4CFE78400EA37D6
-:106B50006BDA9E7E3905C6BBED60D9049C476F7F1A
-:106B6000DB731C0E512C642B0AD3ABCB32E31B8698
-:106B7000008F7C72C6BBCB1E842D95E1397D0BF84E
-:106B8000D7F45FFB6A46E053A67D326B17E9E3A0BA
-:106B90005FD950FEDF5AC7C7BB35B3BD219DF6553F
-:106BA00090C0C2CEFFA91912F5D3FBC3BEA95FAD39
-:106BB000E3DE4743B05EB5D6CAA26E84B295FDE16E
-:106BC00031841F8B95F7E33EACECDCCBF0BC5B1C57
-:106BD000C09AE0B9AB72ED7F50FB1ABB2CC2B3F682
-:106BE000D6EAA742309F22322F83FEFEEC4A1ACF0C
-:106BF0006FE3F2A735E6C9876E817255B1D30DE810
-:106C00000DE55882CFE1BB2CC4E79359D7310B3C3B
-:106C10000733A02200D04769BEE3C47718E7C777DF
-:106C2000AF5302C88F61E502E2F9E72F7E3801D742
-:106C30007DE355A10B885752CD87BE9940FFEFCC1D
-:106C400090B97E32363401DB0D3CAAF135EB099266
-:106C50008F5292128FFA4A10C7C2F5FDDD4278704A
-:106C60005808EEC5797538456573FDEFEF6EDF7B2B
-:106C7000B80E5590EE0C42FB0542AC1BF77B225E32
-:106C8000CC180FF4FCB9F487341CD70F682B0EE92D
-:106C9000D163B3B5A5DB52A6EE40B8CC0080B2EB11
-:106CA000C196191BCFAC50BE8F59BAECB08EECAE6A
-:106CB000DFEDAE81B2FCFD014C0451551B95CAB20B
-:106CC000617CE1286C14F67374ECD115B8CEFBBA74
-:106CD0001C0CE1C41C463DD766490E7E0FF1B9324B
-:106CE000D6CD92500EB565213F62B739DD4DD07ECD
-:106CF000E9A550C6BFA35CFAFB71D2D347A5FBBE82
-:106D00009801FB4A11D5D33EA8BF4F0E0E7F00C796
-:106D1000AF8A71D77039C2C2D77F78FDDF6313A005
-:106D2000DFE75D23AD4F41BBCF55871B3458D6F10C
-:106D3000DD312F5D07E5EB3579625ED7E7498A15CE
-:106D4000ED8ECFBB1C41D4433E775A02028034FB08
-:106D5000F0B1770590DFD90E67508CC57ED227E160
-:106D6000F2869D1816F7C1181231EC4B80E7204DC2
-:106D70002EDD38C0683FA664733B28259BF31FAB0C
-:106D8000E226389FF75B5913E2218332CE6B75C838
-:106D90004DB0BE9F3B1F5B0A94CFCEFF2D7D00CA36
-:106DA0008DF387870F6063FBE68B27519F003D6162
-:106DB000D178352D7B528F7C5DA8C125AAF9260993
-:106DC000E1510BF06802782C745A8276D8172B3672
-:106DD000C28155759522DE304BAC1BE906CF17CF2B
-:106DE0005F112C5DECBADEE73DFD921CFC1E949712
-:106DF000C279225C4BCF7F70CD038CCEED1A5C073D
-:106E00009C63FDB5ACE7FCFED5CE8B59DD8D780ECD
-:106E1000778BAE663C875A2BD7F7FC805BFBE3A8E9
-:106E2000DB63782E77D78EA0731A540B7C02ED9417
-:106E30001A2BDB93887CA59DDAEFD7F4419659494C
-:106E40007CA6B4D62E23FCBE888EA5FE0CCE554A59
-:106E500089C467385FA92A67C457968DAD14F0DCE2
-:106E6000937006D84F8725E4C27D86A2408B84E7C5
-:106E7000FAEC74A2F321C81186F373C6FE0FAF7744
-:106E8000ED417E233A863C7C0E44116BEC8A1D0D4D
-:106E9000EB6A11581BED4BD2F8C76A27E9732D71C5
-:106EA00001E26F2D0B87BA71AF9F33ADBE229AF806
-:106EB000CB75160B95BB960C227BAC250E582B8EF2
-:106EC000B76434E90DCFFF8FC8EDB50CC6EBB3D86E
-:106ED000C81D585F9049E3BDA0F3ABAD2E1AAFA516
-:106EE000404D8EA6FA4116EC5F9EE65B87F8912234
-:106EF000F276A07850BB9D3BD5643CCF9D85366A29
-:106F0000F703C1BB64258E738D93F4C6D092E82736
-:106F10001FE3C71944FF524715DFB74E0795533893
-:106F20003FBDCA7FFA21E41FFE6C381127CA8BCF00
-:106F300096225EAB62AC1B50B8D7397FD18DE7ACDF
-:106F40000B80CB12A33BC85E573218021BCE4F6694
-:106F5000D98827C7009ED0DE2FC13927F273DE986B
-:106F600088E73C7F77F839C378FEBBE1BDB036D601
-:106F70002D4CA573CEC4F1AB58B41BEDEBEEF3FB77
-:106F800079200B9FA2C59D6407583C9FEE7B307B08
-:106F9000608F1C79F83DD81FC0A5D41E9AD48CFAF6
-:106FA000B98555B445E0038F6673FB40665D12CA30
-:106FB000D7653AFE579BF03F3434EE83180DFFA19E
-:106FC000DFE1C1DEDD780E9F0A2727E3CBE3FF2D4B
-:106FD0002E8E34FEE39A7C792BD1FB235CDF08EB09
-:106FE000D1A1EB50DF586F27FD975D3A3614E7AD1E
-:106FF0004EF3FE18C78B1AD16543FF54477297842E
-:10700000FBEB58F2A761A8672DAB7A85E8F34AD766
-:10701000B731669C847233CE932585A0FF604FD62E
-:107020002FF15CDAE7D9157B043FC891795386A12B
-:107030003E74326FCA30E497278701C9933C75BB11
-:10704000908F4A07AF71E13A4F7A265059618A56BC
-:107050002EEA97BF7E0CFC35088AC01FC15EC3E7CD
-:107060008760AF0581DFBE0FF61A3ECF82BD86EF87
-:107070004F83BD86CFCE0D6E7A7FD233FC20E2C522
-:10708000C566EE4759617547D4CBD61C105950E7F9
-:107090006FF0EFDBFB620CE58A5D0986F22D2D8037
-:1070A000418E9E72F996E186B2AE7F2EAF1B637859
-:1070B000EFAB9E60286F8C2995F09CE28AD3387CD8
-:1070C0008BD308BEA7F2FA806FDE28826FFBC25115
-:1070D000C3107EED085FD48BAD8A0BE1271D5CEAFF
-:1070E000423DA6BD78389501BE5B27E2789A1DD552
-:1070F0005EDC3F9CFF88701E85F07568F095099EE8
-:107100006735389F46388F42F866D2B31DE10CF5DB
-:10711000B5C50067C0C78B7E941E805FD62E29A29E
-:10712000FEBB4F34ECBF62578C09AE4638976F19DF
-:1071300062282FAF1B6E28EB70F6551BE15CE499BB
-:10714000606AC7D816907B45F80BE0F91B9366136D
-:107150003F3D29B0CA0478C6C99C0F5ABD02F9DF69
-:10716000F0A719E47721FE02F463752AF5585F074A
-:10717000EDBF0F6DD106463B8431B75406EF177A49
-:10718000A26494EB8B5825D1DB62D64CCF9B591B64
-:107190003D4BD8097A96324E8F9F978526E3F3F7B9
-:1071A00089BEF41CA0E7350EDFA38968BF0DF38DFF
-:1071B0004A40BEE48C27FBB4AF73424D9B697CCA46
-:1071C0003959DB17FC14E3DAA15F7BCCB83BEF54F1
-:1071D0007AE6D1C787F9DC38DFA7129FE78D4953DC
-:1071E0008621FE31EF40835DD5D77CDB347959E6CB
-:1071F000E17042DF2D96CF2D14021BA17C649BDD34
-:10720000867E86739B254D6FBF97ECDDD3A7B87F35
-:10721000E65CFDEC54C4BF9A6DA35211DFCF494A1E
-:107220007D15C0FFDC34E0E36EF2E7B8514E9CF10F
-:10723000B8A83F488CD82C38B715DAFECE286EDBBC
-:107240007A68BF3059647E68EFF3A7C5E2FAF57D2E
-:107250009BD7BD7C8BDD80170BA61ACB0B99AD0796
-:107260004FD2F0BC6D3DF5A82F8925037CFDD8DFFA
-:10727000557F58FDD64B6178F66F39AE44D46FD840
-:107280001436E54BB1A77F5FF0FD6243C55B2F4924
-:107290003DF0D5F16A528EB71CCF095EDB903F02FC
-:1072A0005C2C28974F1EE470DC1673E3D6EB000EBF
-:1072B00085EF888CC3B9D4FF7BC4E743DCBF6F9EE6
-:1072C00027A4D175A7C63FCBEADE263B6E597501D0
-:1072D000F19F4267D730F43F1DB907F80BF295795B
-:1072E0009CBF1CCB1BF5F01D306E67BEE8B6033E9D
-:1072F0001DC9BFB015CB27AB4519E7ED3C7841E37D
-:10730000E35D6F4C81F57DE69188CF741EFCE7F05C
-:10731000F3C2431A9F09707EBECAEA650D30EF2A98
-:10732000800BDAF3FF6CBE7E397EDE2E7973072286
-:10733000BC6A0437FAE16AF2ECA447B4037DD83999
-:107340003ED5DF81F2682AD8C132E29B7712DA9605
-:10735000270F0E1F88F0627EB53D73720FBEAFA877
-:107360005E958F7E76B6453A83FA373A45504E178A
-:1073700032EB9950189EFA9E937ACA84D7D633A1DD
-:1073800030BC36E3699B094F2FB24BA9B6745E7FC0
-:1073900062500FDFC39F70FE729B186C60693D786E
-:1073A000FBD7BCB74B515900BEF202E2EB5DE3D311
-:1073B0005E0C09617CE50AF918E033C9BFD6981B59
-:1073C000B97EB190CBBF230B6F3AFA3B80DFC7F396
-:1073D000385E7F9CF753E21F1F839685F87A2A3F19
-:1073E0002116F1EF745D11D1994E3FE679DA357CC3
-:1073F000D3DB155A15C91D013F8B3C467CC9786EFD
-:10740000E90094A77DAD5F1F576FA78F5B88718DD3
-:10741000B17D8FFB610EB74733F695F43B3E188282
-:107420003DF885FC8445F78C03E5233FB98961DC91
-:10743000F5643187CFC903A3881EDB8B75FDCA476E
-:10744000F5A73C6200F5D893C513DE9888F4E39560
-:10745000484EF735EF396D5F67343DA053D303F4E1
-:107460007AF1C1858B96E0B81A5F38E5E1F8FB7ECA
-:10747000CB42D23B603DE47FB2CDFC9F32F43F81F2
-:107480007DED42FED59E2F325C47615E11D9D585D8
-:10749000923230929E60DEB779BC233FB1935F0E8B
-:1074A000C623BA2A9E57C41A705FC5DCFFDB8EED77
-:1074B00061BEE20779F918B69F688013F19176E012
-:1074C00023283AA4833790DEB4B2D9784E2B1A63BE
-:1074D0004CF46EE417C50B399F6BCFCF191889DFB9
-:1074E0005DEEFCF4FE577AFE15D81FCAB8E62F49A8
-:1074F0004F89378C07169D69BE7453FD6853FD781C
-:1075000043F972F8D8A9C991761D2FA294A5DE0877
-:10751000EB6F7FD25E119EAF317726B75FE6CED498
-:10752000E2F75F51AECE9A09FC2A86F592AB7DF563
-:10753000D7F9D3A81CEFBC99385FB048C27D5D294C
-:107540003F0A93C30BA97F48B061FF6D9A9CAD6859
-:10755000E378D41A73FFCB88879F6AF6D091799C21
-:10756000DF7FA6F1FBCFFE532BFF440820DF3C76E4
-:10757000E8EE58D4DF3F3C382A16EDB1336DB5B193
-:107580005C4FF7C77E0BF0F313A0CB2698EEA3B6A3
-:107590007F8E9E5EFCB4660FFD88EBE9ABADCD91AE
-:1075A000FDD4DFB09E6ED6CF73C592A3BF83757C2A
-:1075B00018E07034EBEB1F2A4AAC4CF0E170F84C49
-:1075C0005262D1AF7726C0F97D5FF8A8C3E11CC233
-:1075D000218CDFF705C7B35A7FBD0CF621D92D45A5
-:1075E0000EF72F13D19FB0457063BC8A59199B0ABF
-:1075F000E778A2386B6F53989E11972B12BE9CAE02
-:107600003B569A8CFC070C5DF4F7BE527D2C15FDA1
-:10761000AC650762883F9AE72DCF37F2994FEA0BA6
-:10762000B27F0FFD8ADE11030E84477E1CE75F4F99
-:107630008B0111CA9DD539B1E1FBF8D02477565999
-:107640002B239E63C52EE33916E5D7D038271F14A8
-:10765000DA8401F03C324D525CBDFB1559F9FE57FE
-:107660001D10C9CFBBAAEECF6F607C7115F07B54A3
-:10767000135E69AC9D8F787DDA2B5910CF3BDB12FE
-:10768000E6237CFCC5A23B03DA1F6F1C4E787EA666
-:10769000316710CEF7CB9922C9BB0F0FDA2DC2B5D7
-:1076A000F0F44A2C487E81209DE727754524AF3EA3
-:1076B00044B8903D2B135D9C98C9E30EA7611CACA8
-:1076C000B7009DA03EDC19103D8108F47162263F91
-:1076D0008FB3971E20FC7939702C16F58AD36D7CF8
-:1076E000FCB3D5722CC6A95EAF9BE0A2F5E5C3B88A
-:1076F000A8F71EE272F4C33A8E8FB84EB20F1BB9D0
-:10770000FC3859B7E2FE69008F4FB788A4777EDA5C
-:1077100058347F1A9EF71689CA39050B29CE713263
-:10772000C0E5D1A9C0D9523CBF0FEBE0F4A15C7316
-:10773000680AC9DD4FEA25C287F203C67359B82526
-:10774000C66CAFC66681DE558EBF29F83F7516DA66
-:1077500049CB93407E02E59ECE2F92D04F59E84F01
-:10776000308C63670512E21DEA97D86EF9C3459322
-:1077700082487F7E81E4DFB2E7009F603DD2BEEBAE
-:1077800049DE9535DB0DF316561BEDA3E5267BC8C8
-:107790006C2F5D4E5E9CD6F054B73B4E4B95A59139
-:1077A000F212E45C4D2E307916C2FD0C18D64D59FC
-:1077B00000CFE74415CB17EBA2887F962D3B7F8344
-:1077C000A697DE8878C0DC7E3655B7D3C3E86C79DF
-:1077D0009D6892DB46F882FEFC01EAC78D099A1C7F
-:1077E000F51791DF6E548E1A9F8BEBB852FBFB8A14
-:1077F000F5DB524DBF2D25FDF624EAB7B09F766C20
-:1078000012D61FF45DF2EF9C9A7713D95FA7BAFDE9
-:10781000675ECD7FC6F59453F9459A7FC7AD97074C
-:10782000B07EF89CCE2FDED7CEE1ACC6274F6B7C66
-:10783000B253B3B71A347951A7C98B53F99ABD958E
-:10784000C8485E58AD2ABB123E734B4B8C493E2450
-:1078500098ECA821A6F331CA8BED5EDF6C3C077B68
-:10786000D268C37B491E6FD4CFF71D263FF24585F2
-:10787000E7156D429CC0B8C9429EA7C51C6DE44780
-:107880005EE856A87E08C60BA13D9A54984FA2E325
-:10789000A7FE5E4EE4EFF5723CECBA06DBA5B551EF
-:1078A000B9762163980F33421F07C051037AC21083
-:1078B000F467C33C4960A0617B1DDF87166FA37628
-:1078C000D9154C16A0DDEADC34C28724A6127F1934
-:1078D000B486A998F7C202CF52BBBDF7C23E00EFF3
-:1078E00043B5D3C92E2F72C4F2B837C8C7FEF1AC66
-:1078F00086C7773D09A4B70CB572D4EC136FB57683
-:1079000097C3DB303DE82EA20B66217FC4B6987189
-:1079100012E269A1D34B7E03C0EBA577A27EFFA242
-:107920008DFB0916723F707BDE9487D1DE1DF794C4
-:10793000937CCAED2B757F6517E1736775911FE521
-:10794000DEAF3D5CCE8D79EA130BE6BD751E646E2D
-:107950002C1FAB7EF6FCAF486F17C81F74B23A8776
-:10796000F365C6BC98C779D293B391CA53C130CEE0
-:10797000427A50375A711D00D726AA5FB17512EAB4
-:107980003BC745C2DF242DDF48C6734DEE2927AA29
-:107990005A991DA472523ECF13FC99A61FB469E7F1
-:1079A000F9B8E6A7784CA39B168D6EBEAFD1CD6615
-:1079B000B3DF7917A79B9156F7D618288FF4BB48E9
-:1079C000CEBC957F96D60DF42F635C372D4F6C9A05
-:1079D00008701B630F119F2E02B1B711F63323BF3E
-:1079E00086F2188B7C8CE21685C535B4BE10C6981D
-:1079F000AE43BDA94610B57AE48F631282D4BED0DF
-:107A0000C164EC5FE479FA08E6E32EF40168A03C77
-:107A1000B3B84620F894C178D0FE48F5761AEF54F2
-:107A2000055F47BB8BF73F59C6643F943398E7E83F
-:107A30001D7C9D5E8C8B9EAA7EF608C1BB98C3FB05
-:107A4000BA8F2C067ACC0A461BE87AF4BE7843FD3E
-:107A5000A81D2986F2406FBAA17D82C748EFD123C5
-:107A6000C61BEA4F7A8A2C2867753B4FF78B757ACD
-:107A7000B8DC9DF194D382F058A4F90B1061D920A1
-:107A8000B4BA18F97D1B353D91350F6798C7B1F72A
-:107A9000BB16CA13D85C5CEBC0FC878B6D563A2FC3
-:107AA0001897F8C8A9C3561AD7915627A01FF33EB6
-:107AB00080B318A6FF35EAF24D8B5FE07AAC61EB3C
-:107AC000895718668E75B76FD1F069BBB60EE0DBCB
-:107AD0003324B2C7399E24E4338B04FD071673396F
-:107AE0006DA6CB36ADFFE35AFFC7347CECF4ECDD7A
-:107AF000188D7059CC481FC915D76C8CC275E433EA
-:107B0000A2C7B6E0D1E870FDF1677D8D533C2197A7
-:107B1000C6F1733E3A7A81501B85E7BA2BF4A7373A
-:107B2000E1F9C2A70D1B6361BD4F08AC0D294AE7FF
-:107B30009FBAFE7DDD678D543F7A3C986850FFC246
-:107B4000674DBCFD64A6A0BFEB679ADC69D4E8274B
-:107B500063DF58F22F5EDC6123BBE7B1F9ABF6B40B
-:107B6000C07A47CDBDE789E7105FE6DFF3BBE79456
-:107B70001E3DBF687E7207E6F18FDCE062C81FF42D
-:107B80007933F67D924DEB96AD0CF1F4C7FB9F5F18
-:107B90008EE33DFE58B44585F17FBCC74AFCE5EA5B
-:107BA000FB1EDEB383E48D492FF618EDFCC737B713
-:107BB0003E7110DF573DFBE8B9B07C9D93F3360D65
-:107BC00043BF69FB868A9699197DF3CF221BF3A1E7
-:107BD000FFC7F3C227CFBC0EF3FFC677F5F8703BA3
-:107BE00060D42CEEFF69DF50D53213ECD4D122CF14
-:107BF000576056FF4684C7E89F0E52507F0352B02D
-:107C0000FA00969E39511615F6F79B807537F1816B
-:107C1000399B33F03CB37F9C7FF4233CE7531ABE7F
-:107C2000F7A18FE87EAAEEB2A410DCFD2F3AB87D52
-:107C3000A32AC3C83E762BC30AC3F4B9F67BF43833
-:107C40009EFB3DE4E3852531145FD6E32EA2E7CF0A
-:107C5000F5C8E7974DAD9C24D3FA8DF1FC1484DF71
-:107C6000048CF7F2B8BDDF6F65941F045B433AB92B
-:107C70005B1C4D7927EFAEBE8BE2F6FE1ABB9C91E2
-:107C8000487183A7B05C057CC73E91E2B901CA3751
-:107C90009EC5F3372E2CAE7DD8A6F40DFFBACB9C33
-:107CA0008FA49D8FF9FDCDDAB9D4E2B96418CEE581
-:107CB000A86F6284738975107EE9E722C636D2B94F
-:107CC00030873313F33F067394C2FDBC8172A8E37F
-:107CD000944872EC3725EB6AEE86F2F94B0318D222
-:107CE000851E57294DE279087424C0B724ADFF6082
-:107CF0004DEF463E867A77A91677E958CA28EEA254
-:107D00008F77B16A80CCC7BB8DF4E6D24AA07F944E
-:107D100025313F27FDA27E38CF932875762DA5BC4F
-:107D200055C1E2C6F8F960935EEF6795B4DEC1EF26
-:107D300088E4CFB7C46CA1FE83013C6216B6B211D1
-:107D400010A83D0A76305A31AF24055F28617A9633
-:107D500096B73BB8EAA75C3FCA819EC986F9842FD3
-:107D600069FDB5EF8BC807AAEC0AF23DCCD142BE43
-:107D70004DF04B433C6AA5FEF2B7998CF73998CA8F
-:107D800094C4C9DC0F86F399D70FE371BD10F433A7
-:107D9000DCAF50CDE7DF3597DF07618799126EB70B
-:107DA000B0F0F50C3794353F99B12C25D90C72EA17
-:107DB00037978A0654F6EBC733F6B728DEFEFDBECA
-:107DC000156176577A4F7B3D5F4C87734A95FDB4BA
-:107DD00010DB77BFED5EF5C02CC06727F366FF0AA6
-:107DE000E0E17B4724796789394EF0084571F874E2
-:107DF000EBB38BB9BE0BDA790DE55D83BCC3F3C37E
-:107E00007CED9180EFCC6FCC17D0E7D5E34B1D1AFA
-:107E10003F0EA58522FA058F69F4DBB9E173CA2B01
-:107E20002845FD167039B4F163C33D900105338ECA
-:107E3000E1BACDF908BA5E8A7296F0D7CFE56C87C1
-:107E40007F02F19D8BCCD54CFABF99DF5819E57FA5
-:107E5000DC2D46BB9BC86F772FE58F54F9EDB21D23
-:107E60009EF3DC467FCC82A9467950A02698E48513
-:107E7000D1DFB5D06B8C138D68594FFCEB22EA4DE6
-:107E8000C4EFF87AAC5A7E9984F74C44B4D7FDF429
-:107E90003CAEF1E737353D330AF92BBC8FC1047393
-:107EA000C047170B517900A2FC704C6D5728EF3179
-:107EB00081A9541EC87C54D6F3219359809E7A9E82
-:107EC000CB3016A2F255A80F8948520A3D87A31D50
-:107ED000321CF53C7777BC87F22773D2285E50C0FE
-:107EE000D4F7B05DFE844F49EEE5DFC4C80FCFFC88
-:107EF000F52B5428772CD4CA98098FF926B98C23EE
-:107F0000A7BF96D7E7E9E5BA152AD6CFE0EDA5D900
-:107F10004D7BFD4EE25F5AFD265EDF5D6E583103FC
-:107F2000CB9285CA715AFBC299AA6D36E62DCD66F1
-:107F30008407C11CD5317B604FB92C478D0E2FAF04
-:107F4000CB559DE1E567B3D5D8F07267B62A879720
-:107F500087E6AAF1BCCCFD4EEF48EA30B477E1E702
-:107F600047C2648E87F8F39AE44BC176EA0181E058
-:107F70006507BE8DF092981A44A60464E3C07C2283
-:107F8000E033B63BA19E8DB751DE9F25C699DA9F9F
-:107F90003FD24C5F21891D443FDD02AB2F13F76DAB
-:107FA000E67B82FF95BF633E0FD04336EAF9A16AB4
-:107FB000AE0784AAB93F40A713FDBD79BECBE13D12
-:107FC00053C3FCBCE93DE3F6B57E331E9FD0F4BD40
-:107FD000764DDF7B47F34B77EF37648DFBC0D143A2
-:107FE000DF7DF34F2BFB208C7FF6DEEFD9A51297B8
-:107FF0001F32CA8B8E28B638D2FDCABED6E7CC99BE
-:1080000055309BECDBA132C51998CEF739BFE9C0DA
-:108010005F810F8E19A0DBAF6E07C2218325CDC90A
-:108020008479B77918E9AFB5338F1622FFB95802B2
-:10803000120CD675F68E7348714C788ADB13CDC35B
-:1080400018ADD7952647A1BE54AFF14D3B8BCB1B46
-:1080500081EB1F6A25796B5E777D6C40C0B8624A00
-:10806000308AFB371259200AC649F1B83D94B7E26D
-:1080700017650F964BD8FC4C282F6F11150F8C737A
-:10808000ACA58895C3B8E55381CF51663ACFA78890
-:10809000D7F0788C9D51BE45EB4027C5ABEB368FB2
-:1080A0003AB212F966B2C832A0FDD8FAF11EF47BDA
-:1080B000D63AE3E329E6A4ADA7D6E97E15EF63F847
-:1080C000650BBF4F22AB0ECC47DF7D87D583FC7C91
-:1080D000D8D31363C530F89FAD3B1F8579EE8FCAA7
-:1080E00016AA7FB43ADB718B13EF130655CA33908F
-:1080F000CFA84E987727B4190CE3DD5F71A67924D9
-:10810000EB1B1F623D36039EC6B86D263FA8D16F9C
-:108110002999F483E6D95AFC7B329B8CE77CED13DA
-:108120009724D473973915F2A367370A949F123AAC
-:10813000E24EC5733ABB7514F9CDEB1A45CD6FED20
-:1081400026BF7568184BC57B3665CD02E9C562DD73
-:108150009F6BB0DF55994A328E73D5C4AEE4707F01
-:10816000D9A3F7DC15857CB4AEC4A2F9B9198DA3E7
-:1081700028AA230DF6FF7E9DC0F3272459C0FBCC0F
-:10818000AE07C5285C57A7C4FD144DC04FF19E6EC5
-:10819000D38CC27EE950FA1BAC33CC6EA94F4C8F06
-:1081A000C6797BF05725FFFAB9E609141FD9D39891
-:1081B0004DF920E671EEDBC0DAD03EA9DFE0A06722
-:1081C000AFFA546FAA1BFABFBF6D46030829F6FE2B
-:1081D00091D549784F6865B39D4545C0E373DBA6EB
-:1081E000D07C2BF13E33CEDB5C60433931BB6586FE
-:1081F0000DE176DF06F5E9F079EE2CF0BD8C7C2FF1
-:10820000A6F969C213270BFA119EBFB8414D45FD6F
-:10821000E25C068B982F796236D7335EBFC14BF78D
-:108220004ADE1F16B9DD3BB3B9DF792E120BCA0F38
-:108230002B7B7315C0B90CE8A9065E9D6D9C108B55
-:10824000782BB135C4A47E5352E4477BEE02EAEDAD
-:10825000C0CF1BEE59B4A31CDAD5DF3BF22D64CF9F
-:10826000D7DAB8DECC7E2D125D805E5886F4F997A1
-:1082700062875C1BC67F517F540DF9825E86FA9D32
-:10828000D428066DC0CFA5C31FFC37DA3B88B76A78
-:10829000181ED3CF64CD2ED0F235922693364E3FA2
-:1082A000F5731605820CE32E2B1C789E663DBD17D8
-:1082B0009EF45A47D8F8A8E7CE646A54D83A802585
-:1082C00004C95FEEE3F376B7D3EAADC060BE0CD36A
-:1082D000DFCDF5FA3E46ED30D2ABC3C3CF0BE0DBCA
-:1082E0006FBCEEEA80B1DF480FA3731B2DAA473F96
-:1082F0004039DB2A527EF598561EFFBF3894919F75
-:10830000A8AFF174FE8B3FD6411A1C01AE0D8985D2
-:10831000749E7DF5B3054EA869E37AECC3AB938CEC
-:10832000EBD2DB8DECDED73A16CDF5C136B4CFEC0F
-:1083300001E07BE3F0794245F99DB9FB0EB9BF7DC1
-:108340009BF9D94A5669437D4D51427BEE43BED1DC
-:10835000E222F983E83062325D5D24B983FDD430D6
-:10836000BEE77A706FD36858C7B95DDC1FDAB46DA9
-:10837000EF134FA0DCD915E3E671267E4EE3982E6D
-:10838000FF78FECF2DACE74719A48D0FED3FD2E467
-:1083900029C350D5A09E78D50707967FF604FCFA2E
-:1083A0003EAB9C8A7C4CDA5DE4B819CAE36C81244C
-:1083B000E4A7B7ECB2F7AC0BFED95B8C65699FBD47
-:1083C000175E3A747C82F19A0E3DB16339CAA943B3
-:1083D0000E37A688237EF90D74124A2F007AEABC64
-:1083E000E73FE89E7EB47C7E29E5B957DBE97E97BE
-:1083F00019BEFB6673BB9F69F736747A8A6A1EC51D
-:10840000D0BF7846B39BCE6C013B15CA0DD536055F
-:10841000BF6FD0E92E5093228C67ABB69DC67365B3
-:10842000E176627ACF3EF4F13BFDDC0FD900E30B3D
-:1084300011FC7D971BEF4F5EB5C203F87FC1EBFDCA
-:10844000B607D67F76CB0ADA6FD5C1EACE5FE1F9FF
-:108450000EF2DD86F567B60C9F2CA023D2AAD0BD04
-:10846000BFBABA67489E344F857760CF37B759A3F4
-:1084700050FFF0D759287EDBDC96183D02E594D3F7
-:108480001231CE1AF070BED9234FBCB1E1FA50D3ED
-:108490004CAE0F094F95DC9F0EF0AA3BC5F3147547
-:1084A000FD43D6F0648C5D26FE2CD7F13CB71E7DD3
-:1084B00088EBD51751AF467D6952B91C2E9FEA63F0
-:1084C000F9F730CA67BAFD781F33C7C9487E5C85A3
-:1084D0009716D06FE16481D969F8BD0C37C3FCDC15
-:1084E00078D07F14C0F8C12D5CDF89763ADD2AE2AE
-:1084F000BBCAE9CA01FF213CA3335586F3584DFAA4
-:1085000085CDA43F88A6F24E8F519F50983B16E12F
-:10851000ECDADA7F1E87EECF05BD89EE9BF919C034
-:108520001FF1D4E1A7F389054302ED0AA6AA4AE2A6
-:10853000A01EBD1FEFB571FF8A4CF122416D20BF17
-:10854000FDAE09DCBF91CC78DC2B45E5F6FCB8A983
-:108550007E2A83FD407128F673168D7C79BBD7F790
-:108560000CE24D9A1020FB2F7E2C1388ECBFA65EE8
-:10857000CEAAAE2CAEF4C3A3DCFF576B897647FAC4
-:108580009EC2A1B99C1EA38FC1DEA09D789383E2F9
-:1085900079B9E28146C4A79D132DE4D7DEC94EC840
-:1085A000C84F8E7B787ED125AFF7750FC565BD6945
-:1085B00008FF242B5854A0ECDA343FEEB03BD3A391
-:1085C00051D4BF9BFC3CC1C30FB0CB807FBBAB126F
-:1085D000E333E1FD23551B09AECA40EE27D3EF9FDD
-:1085E00027C8FC9E7F93F7BC1FEFF9FE702EBF07D4
-:1085F000145D609D930EE5ABAA4302D2DD26977B06
-:1086000031E273A3F20C9D475A9662417FD9102B39
-:108610007BD53E9EB127E3783D0A4AACFFC1D241EB
-:10862000BBC3F3491ED0F6FD0321B2BEB27C2E9728
-:10863000271D87009003D03E669AFDFD7839D9CF7B
-:10864000DD65801BF47FC0CFEDE73F7B1E2FF75B1E
-:10865000C92ED2ECF7F672B2CF315E0AF573F2D6BC
-:1086600095FBA1FC485AE47913F2397C1F794DDD62
-:108670001103F0F86B0D8F63F57DCEAA6001DE5219
-:108680003B90A5E23AEB5CB6C591BE27B3329FEFB3
-:10869000B723B18DE0C5409EC75E47F7E94DFA6A42
-:1086A00080F4E00B15E3FD536877958CE2FFC04F33
-:1086B000264DA6ABFEF4E39AC4E5A8596FD5F52B79
-:1086C0007DDEFB522B9351FF6C75A9C43F5A416F5D
-:1086D000453C2BADE67A6BA9B5EB3DBC3F94729C53
-:1086E000E7BF084F8D6DC2EF1B00BC14C4BBD94E51
-:1086F0009521BF1963F7D23DA35ACC5F977BF457FE
-:10870000260E3DE283F7D21091F4C418B98DF457C8
-:108710003693E7E5AAF01FF21B5D9F758EB51AF23E
-:1087200077EDA6FC5EC994CF9B99A7E5C369FCC60B
-:10873000356962BF7AD3CFC1DEC5751D067E83CF92
-:1087400020D8BDF83C0A76393E5F02BB1CFDDD2F08
-:108750006FC8A4E7AB1BDCF4FE571BA6D2737A6A82
-:1087600048427D9BFCCEE47C644181FC773A3E0527
-:1087700046648FC5FBC7BC7EE69C94FFF05F0FF597
-:10878000895A7BFF17849FDD65A6ACC4F6A549BC5A
-:108790007C302F7525FA775E2B56B3F300CF065A3F
-:1087A000BC65F85D07F65D3BC527CCFB3996A7CBCA
-:1087B000EBC8F63AC34F1618FD35DEBC7EFC353FDC
-:1087C00010F83A96CF5DB70FD731A0C0EA457C4D7F
-:1087D0004D37C609F6E769F107ED99FAABCA878804
-:1087E0001E04A08789FDD14390213DEC74B11B91FB
-:1087F0001E5A5747A6871BF2B95C6D75727B8FCDE9
-:10880000017A1802E512B3FD16A2FC8F0B557B8F7F
-:10881000647C23F4A026A13CAD5B0DF214C6A93BF9
-:10882000B2FA5D92A3480FD07A30D203D247183DF6
-:10883000E077585AE3347A900302C681801E82782A
-:108840005FB04EBBCF11460F02CAE16E7AA8F86640
-:10885000E9A129CF287FBF2A3DFCE28610E53174CB
-:10886000A40592110E3B25EE3FFAAA74326C8E8D50
-:10887000FB8BAE7127217FA995383F9D3DF434F9DC
-:10888000E1F21D6E11E58A47E178983B71027DFFA8
-:10889000E7CD3C1BFF5EC102750FE1FFA28FC8DF71
-:1088A0003AD0C2E9EBD86B7BCB112F87D5B717CC69
-:1088B00046BC582F92DEDB6B7FF334FC11F8FA4193
-:1088C000034A0E8FE7FD671EAF57D69FE4FC368E36
-:1088D000C919B09E24BF5CE8C1F8CCF516FABEC732
-:1088E0008082F6389493FA78CC5A998CF8852AA825
-:1088F000637C6F7A819F36699081DE7EDE1FBD5D6D
-:108900008EBE676BF4053F9477EBD3EE2D7E55FF5B
-:10891000699FFEBC6B22FB07B76872AE55E27918FF
-:10892000D05AC67BFA4F797DBFCD23FFAB490F3BB1
-:108930002C07D15FC6D6C6927F37C9CAF5AE24854B
-:10894000E78F0C617E82B31E07D3F53645E5793E8D
-:10895000B905BEB338EE6EA61CC1EF1938DD6C3117
-:10896000C5B9407FC578F576AF7A8EE6FD9AFA589C
-:108970004281FA497FF874FD22B50BC7EFAB7E4602
-:10898000C15F8E7D89718B6A9ECF6CADBE9DEE738B
-:108990008960AF5830DEE969A3EF02C9B24D51C812
-:1089A000EE52E763DE62AC069F59E227A47FB7264A
-:1089B00081FEEFEEF183EE4CE6714E113DDCA077C7
-:1089C000B61E77FB6F81796CC037FC788F3D1FF442
-:1089D0007428C7A09E8E634DE5FAB87EFF2566AC6D
-:1089E000A6A7ABC638DCE5F4F4017334B9399E4D63
-:1089F00044F8A45A94EDD3E0FD8487724FE2F14C21
-:108A00007A7865028AB329BBEB8BF0FB57ABF7BFD3
-:108A1000BF1BFD92D37E6B6748A7AD87B89EA22E81
-:108A200060742FF90AF83CD1C90DF94F97FB472024
-:108A30007F898C77AF6B78D781789768C0BBCC394A
-:108A40000323E29D1FF9F13F8077E3E718F12EDF62
-:108A5000847713E6FC6378771DAEFB138CFFC03878
-:108A6000EF2D546F98D30F1EA62E5467CCE9070F35
-:108A7000C3FCEE644F8D645551E1DF15D49F0D2882
-:108A8000E7FA89FBDB379F21B9595B95E340FDADE0
-:108A9000AEE4CC1B1847F84B955D09F713819E6730
-:108AA000D083615CE60703F6683ECF633EB6DE1E08
-:108AB0009C0EFD4A65EECF2F95DD0CF3A845679718
-:108AC000E4037EB52CC9C750BFB627597AFC12F013
-:108AD000EF5AE9843707E0DC097214CE984DBF677E
-:108AE0007B22FA9B5E3B3495FC4E3A7D74C4F17157
-:108AF0006FE802F914D67FFADF406E85E1FB0C6067
-:108B0000E0E1E51C47B2A17DAE9C66A89F9D74B5CF
-:108B1000A1DE3569DF4CC40BB14C8BEB6BF7CF7426
-:108B2000FD618C5D253C6BD5F4DB3C25CBD01FF57E
-:108B30005CE47F5694EB503F37739A613E5DBE5FB5
-:108B40000FFF21DD8A26B96D96F356939CEFACBEDC
-:108B5000108FFCBE618EF1BEDA666B289BF808E3CD
-:108B6000796A575DFA05E17FA7C2F1BB4EE2F8EEE4
-:108B70009FAA7D67C5443FE36CDC6F56BBC4417E52
-:108B8000FBDA43DF7AD717E64F622CF01ADE671C58
-:108B9000171BAFA03F7E8895DBCFB2CAEDC0B1AE48
-:108BA000EFD3F86C35979F82CCBF37B90BF8027EB4
-:108BB0003F8B1D0E913DCFBE6BA3FB4EE3E6C7116D
-:108BC000DEECACB0501ED60F856094301CE9562503
-:108BD00039C392985C47F9876FF3EF1432E6DE9C55
-:108BE0008CA6B44A79826CAAA3EB352D2F15ED948F
-:108BF000280F736F9C867C90EF337E223F3FA79BAC
-:108C000097E5EB7959B75FE3925833E6990EC1F1D6
-:108C1000A06D6215936BC94F10A4FAA11E76A2969F
-:108C2000E6E7FD0797336F2394C54A55F3DFFAB49F
-:108C3000787517C591D3057734F2EDE1A297E2C8B4
-:108C4000B14CA638730AABA4678C10E44CE36BF20A
-:108C50008F6B010018AF67B136F2E766FFD8C9D055
-:108C6000EFD6EAB2EDA1FC9890427EB94DA7F8BDCF
-:108C7000B6DAA577BD3109DA37BEC1F3F3370DF3A4
-:108C8000BF8B748D3889F742456725D50F7E5574A3
-:108C9000CF56F07D33C37BC4CB9C9600860AAEB51D
-:108CA00075FD12F3EE58BC8DA13E5207FDCBA0BE60
-:108CB00073A905793143CDB4DBFF88F53778FDAF73
-:108CC000A39EFBDF03E81E3233F90D5B7D5C5F6E14
-:108CD0004DB4119DD7966427E1780D89D174DF6C6E
-:108CE000F18D956F20FFA87D5B746F14781FF4A73A
-:108CF00013EE613CDFE64D433DD4E6B4517E87D9A7
-:108D0000EF6763DEB726C1BEEAE26E49EA4F1FEAAB
-:108D100033CE506209DA62AF3CCE507FEF4D14572C
-:108D2000D0D7A9EFB3A1E4BCB45CC1DFFEC1384326
-:108D3000B51039CE10E2DFD3C8C0FA71081FEECFEC
-:108D4000FEBA71861DF3BE5E9C41DFF73CEDF77CF9
-:108D5000406C2D5F82FCED746E969EF585C1711F8F
-:108D6000AEAF147F53F87BF49F2FD0CA6F1C68FFFF
-:108D700004FDE4C77F74F4003EA75F7AB4642DE07D
-:108D800045C154EECF7FEB7B710FF2E18C7EF97918
-:108D90006EA3BF1C7F103F691D02BFE71E5E5F60B0
-:108DA0005A57B6D5E85F9FE934B69F9568ACF70C83
-:108DB0003596F5BC15F37E37C6DC4F79679BD63107
-:108DC000FA1E110B3F0FF1F265BBD21B4FC2FDE53E
-:108DD000CC9D4674DFF90EA77BEF8B7F71915D9977
-:108DE0006491D10EBDB0B87ED3EB4A783CC0A322CB
-:108DF0001E7DF193B16FA25F9BC9BE20E6F12DCF1E
-:108E0000E1DF61EAE59FD7FCE3195547DA6686C5DD
-:108E10004F9B06F96E9A0BFA4B4649A105F5878CD4
-:108E2000AA97A87ED19249FDE291AFEA98611CFC15
-:108E30009E1DDAB7BEAA97E97D5FFA8E45F1F37CF5
-:108E4000B86ABB42FE5FD3F76E7D98CF867C3E9DAD
-:108E5000CB9B5A89CB273815265EC7485909DF971F
-:108E600045E17CFDE2547E4F820117427EA58F676B
-:108E7000968FBA1C70AA5C7FF4559BF2EF4CE36F9F
-:108E8000F7FAEE990B7425381B789E5D8ED6EE307E
-:108E9000D74BD91C26A35C867D46CCBBAC9BABD9FB
-:108EA000997DE47B31DD0E2C7EF55DE4875FD90E84
-:108EB000EC63DCE9A9A1A591EE23EDCED3F4F1A8F2
-:108EC000D030E4C31D5264BDFDF6E2593BE6F6A383
-:108ED000D7629E6A78DE44AF7D7FCD3CD5DF7AB81D
-:108EE000FF4B8F3FEAF9AACC1A188FDFCFCC74FE64
-:108EF000FA668A2BF691A7BAC9E50EA1BFAAB62CCD
-:108F00008ABEF7F875FDD56734BFFB037319F78781
-:108F10009BFCF5E6751FD1FCD797BCDE20E24B5FCA
-:108F20007E7ABDFDBBC991FD64C9F3F5FBF3DAFDA3
-:108F30001F0FD7FB54C9CD22D9057A7EA2F93DD89F
-:108F400041EDB80EBD5C569F417EB65689E32DE5D6
-:108F5000740CE9C96775A2FE477A5433D5C75670B9
-:108F60007D50D7B3642D4E60A627A08FD3441F2514
-:108F70003CEED0A3276AF4B108E803E87228E37452
-:108F80006CD1F230873A784AF7D7D5A37ADB4D1EF9
-:108F900047A4BCD3CBDA4DF5931C643739C7BF8ADD
-:108FA0007A556715BFBFD6E1EA7261DE8AFF6D911F
-:108FB000BE67DB577FDD7E12E71BEDA76525DCCEA4
-:108FC0005956A2DB4F21C9E742BF30D84FE487F59D
-:108FD000D9F307F6B6A3305F14CF09EC4C47FE3740
-:108FE000C11F4C7EA263985700EB3C32E23CF93F34
-:108FF000065771FFC7E02AEEFF4841FF471AFA37CC
-:10900000B8BD56EBE6FE0CDD7EABD3F2BC747FC878
-:10901000551A1E8CB157727F88664FD51EEF22FB02
-:10902000C9A97DCF06E3758847B66A21802E4226FE
-:109030005ECA453DD83E983E6FCA58B5D10F62CE44
-:1090400043769AFC1DE6BC816BF3353B4AF37F3CCB
-:109050002228F74D83799EDD91FB3AA2ED7FEE5AEF
-:109060001983FE8F9F06EAE76AFE8F87F0BEC5A1CF
-:1090700077B9FFA3EE10F74BFB5081B92E12FEF526
-:109080008AFB90FF6365BE9FFC1FBA3F6999533B03
-:109090007727DF2FC297BEE7E9E165F4432804CFC5
-:1090A0004F7E8971C2BA6B782EB89D6511FCF4FBB6
-:1090B000AD3AFC772619E1ADFB9FC6D803AFE1FAC4
-:1090C0003B92AD6C23CA51F1138AD7889A1FFA9B41
-:1090D000F22BDD9C6FF42B8D7F68C276FC0EEFC403
-:1090E000878B4EE273F2EE750937C373EAFEED45E6
-:1090F000F864AF7238FE751EE75B98311DCEB796E7
-:10910000E729C44F7BE0CAFD4A3A3EF6F8E378BC53
-:10911000BBB482913FAE54ADA43B8C98E78DF8A3CD
-:10912000C3A7D5849FB5C3783965666510EDDE0C9D
-:1091300080A72AF7C6D7D6E36D6B89EFADB6297E37
-:1091400082DFA51AF4D3D9357BDF8C8F197EE3FD3E
-:10915000E1CBE1638D096ECFEC98701FC2EBB95D76
-:1091600045AFE3F3F9C0BA1884D7C17DDBE7F60158
-:10917000B764431E3FC26D526F7C3C5EE06BCE878E
-:10918000F7D3DD012BF1DB0A8CD961DEDBDA286352
-:109190005C45E7933F8AFA5A7C72F379BAD7585BF9
-:1091A0007D81FC4A7555FCBB101D2EB571E4C42BA6
-:1091B000E793D7CEE3F7D8753E99A2F99952E41018
-:1091C000D1E332A047CCFF5C56CDE30A78CC310026
-:1091D0000F31890563C87FE0207ADA89F9C3D7F6B1
-:1091E000E04F27B4B30F60BDE49399BF825C7C1E4F
-:1091F000E1D5599D407ED93DDAF74555AB9BECC78B
-:10920000D9C5DE8358AFC7A5B67BD543C487BFBEDB
-:10921000BFF0487E98BFB0238E75FBD76A601F39B8
-:1092200055590CE34BA2DC2529E85FABDE2DA09C51
-:10923000583A87D349CAD04A9217BDFD6D5D396847
-:109240002F74E04DF12CC283B771DD1D557B090FE2
-:10925000AE5DCDFD241D55171222E3C1DF5C5FCF4B
-:10926000CF389EF2837579B9B31B0F02AF4DF90A5F
-:10927000F272FE3CA3BC4CD1E83EA5FAF443E89759
-:1092800016353C109DDC2F8DFC13F160701FFE47DE
-:109290001D0FEA1056801775B239AEC8EFE55EA80B
-:1092A000DE4B7FBEA5AFF55D3E2F548BAF633C9187
-:1092B000C7D7DF453CB556F17862C7FAD964275E57
-:1092C000A81664F437EFA9BE5DC0F39B5D1210428F
-:1092D000CEF0797AE5833AE60DEC891FEAF1C2E334
-:1092E00005DE687C3F1D702A291EFD7F9A1F7D6860
-:1092F00064FF1FE077FC3CD43F0FCB244F743F3A10
-:109300009374FC561370BC71B6AE6132E1B72F098D
-:10931000DB771EFA2FCA0BE8F113F23CB37FD8CFEC
-:10932000556AF473ED5C6ADB43DFD763A15C8A8F17
-:10933000601C01F9F6363BE533960B0AE5FFFDB5F7
-:10934000C03796F6C1BC9467EA2B76C8E40F734D1C
-:109350004E42FC286D10496EF7659FF4A6B3D3C446
-:109360005F5200AF347E437044391D158774271057
-:109370007F1181BFC4A01C44BA1B1BCE5F024B8867
-:10938000BF328B3B36F58AF84C0EC2B91F3E933B79
-:10939000CFC86766CDFB07E212C17CC6ED3A6DDF30
-:1093A000A87FD2BE357AEADE77099733A287EFBB72
-:1093B0005B2FD5F88C998ECCFBFA7F90AED6F54119
-:1093C000577722BCBF025DDD7319BABA17EBC3E849
-:1093D000AA96CEFF5F8FAE5AAF84AEC6CE63C6FCF0
-:1093E00063ED3BCA63BE63E1F98BFF97F38F13E72D
-:1093F00072FBDC9C7F8CF92258CE87B3A1F3D1CAD3
-:10940000F3273205EFA7D977BFB465B4C2C70BF70E
-:109410007B3293BF9399FC9B66FD2E823FD4E0FF85
-:109420003CFEC4EF8E8F865F7FFCE47F915EFBC6BF
-:109430002C81E28FF3477D7118F5FD82CD6BB53C31
-:10944000F7FEFD9FFF6C7F27FE84FB57CDFBDA14F0
-:1094500073BF068FAFE6EF64EE1AFA7E7867257366
-:1094600013DC2FE3FFEC94471AF285BD2F963FB82B
-:1094700010FD9FC7F977F8CC7E4F3D0FB8B5643922
-:10948000E9F96754875B8CE0F75C9EA0DC46FEDC64
-:10949000DE7ECFBF221DFCA37ECF657315C243B312
-:1094A000FFB318D8D5FC7EE2BE1D719502F2BB9CBD
-:1094B0001237E5DBB14BEBE8EF39882521D2034BBE
-:1094C000ABB81E38A0C0E7C2715286B27107D13E58
-:1094D000A912DC16A5375F063D33767E785EC93764
-:1094E000EC2FF867F9FB5E99FBD5EEA5BF82F09EE5
-:1094F000D4CFFD7425F430E6AD3D52E3A2EF563DE6
-:10950000A2E9D11D929A84DF397F2BEE030BF2EF93
-:10951000408B85E1BD31B35EDCF7FEB8FCEACBCF12
-:1095200024A17D34B6C73EAAEDF623B91DE17EA481
-:10953000FA0D9E43E722C049D78BB7CD37DA47A54E
-:1095400025DC9E2D2D51C98F549AE861387E8A936F
-:10955000B5A15C1493BA24D4539655F8C8BE37C746
-:10956000E1CD78628ECB9BE3F0E638FDFFAF71F979
-:10957000F5F38DDF651CA7E5A1206FC7EFE998E340
-:10958000F09BADDC4ED9A9C23BDCCC578CCB5F75D0
-:10959000E9011EE757B9BF3499713D2D259FFB4B5B
-:1095A000CD7AC723526033DADD8FD458F4EF5618E2
-:1095B000E2FA635D3C3F7ADCFC05FB293F47D70BB1
-:1095C0002B402F14482FA4EF1C9556540A1CAFAA09
-:1095D0008EE03DD36532C7ABF9F339DD5887BA4920
-:1095E0000F16AB6F67FCDE959FDE97A6F2FB60D18E
-:1095F0008867D054CCE4715FF984E8C6FB095BB19D
-:10960000E934BC0FCAB81F679A85FEBE438B5099D8
-:109610008CFCF80141A627E84A748FF0C93875D050
-:1096200012F2DF58C86F7F2CB72109D7D758B32D56
-:1096300009F336DB34BFF8B6DC0FE8FB0EE2582640
-:10964000A39E02CF887FCFF39E0582F67781DA92C0
-:10965000E8FB02AC99F44931D3C6F8DFCF71075764
-:10966000201E9D73929EF08010E0F76E5C0EBADFB4
-:10967000D67CB52DB91CD6D3E4B291165177F5AC92
-:109680001369F0BE69A01C8B7180BAB474D94F7194
-:10969000EA865791BE9BD2D219E6CF37964CA67B6D
-:1096A000748D9780B140CFDAD123DF9A04EF370B66
-:1096B00021FA0E8F7F9A85E2F02D57CF4A0EBFE731
-:1096C00028CA3653DC93EB95A262A17B73A216CF16
-:1096D000167BC5B38DF1E9AB1670BD4861CD8BE942
-:1096E0005EA5D326E37E4BAF1E4F79AF179D36CADA
-:1096F000072A9518FF8EC6D58CCE2502BF337C571E
-:109700004532AD6F3306A629FFF98155A887E31DC1
-:10971000409E9F5FC3CBDDF5DF5B85F8431FDB8198
-:10972000F2D937EF5A85F9F80AE37FF7A33693E7C2
-:109730004F96BA0A89FF964AA188DFCDBDDC7A141C
-:109740001650B5F1D8FFE6789BAFB62DC67B44978F
-:109750001BAFE75C02C4BFBFEAB87A3BF3B8E67E52
-:10976000FF5BEDFBDAA76581FEBD43467910A41AC5
-:109770006AF7C3503FB66AFCB0367B7220A8603EE1
-:10978000AF9FD3459C2562BE6CDFF411363E4FCEB1
-:10979000257E4BE3E3B75CAAF2826913F9FBC2A40E
-:1097A0001EBAE9CEBFD0C683AA97514E6CD2F90536
-:1097B000560DEA19F7372513280F16EC0B25C11D96
-:1097C00081FEB43C0D6A9F46F7647F8B79E26C346E
-:1097D000233EA2B7B76AF39AF336B66BF37ED5BCD5
-:1097E0008D73B88789246BC80EACFB6D33E52F31C0
-:1097F000FCB813FA67B364BA5F769F10A07B91FE42
-:10980000951CBEFA3944B1EE1FB27BF47C9848F93E
-:109810003268BF25E9ADC3CF219DCE7204EAED9B2E
-:10982000478DA3BF136965CD8F3F01CF1D0736FE5E
-:1098300011F33EA2478CBB7FEA44BCC76E71E3F2D2
-:109840009CFFB6E36FA80A378C5DD98CC3ACD822D5
-:10985000A8E8D7B7CBCE3D681F318740768375FB2C
-:1098600060E20B49E5C6736F15D45FE377F4FC5BE8
-:1098700005E2A3516EA35D611B6A6CBF4EA33BB3AF
-:109880007DF2801039EEFDCC022E67AC686F84E962
-:109890000DDB2485BE0BBB6DB388914CB66DBD9DB1
-:1098A000F8D9CB6F15AEC2EF76DF592F11DC5B6FA5
-:1098B000B0D1DF8B6A75C98B16635993677A9CF9AF
-:1098C000816B4606C2FFAED0D39A9C6DBEC146F2F4
-:1098D0008059BB92D02F6BBE6FDDCBBE32E1DDE590
-:1098E000F02C7741BC86DF01922BDD76FD280BBF83
-:1098F000573CCAF22F71AF786E373D7CB3F78AE7D9
-:10990000A2613EB027DFCFDA2BBF2795FC7BF5B3F2
-:109910006DF4FDB5AF6AEF6E5BBF8AE485FF76E656
-:10992000CE70F7CE0BF3BE3882F0476C14C90F2708
-:109930009AECD9FDF3A56EFEE308E3937A5ED07648
-:10994000ED9EEE766F03E5CFD479F83DDDA8E655C0
-:1099500064276F033D0CF3AA74BBF8CCD4F4C9029E
-:10996000E5FDA87EFC4EC6996C2D2F48367E4789B2
-:1099700069F97DFA7CDBA6A6D37C756887F7830737
-:10998000568F766FD7345E37BF467B3BECEF6982EC
-:10999000BD7D6E01C0FF7EA71B9D7050FF12D5B329
-:1099A00089F15774AFB2137F85761945EAC7384EEF
-:1099B0005EC6243FDA7967D80086F038E772CF4276
-:1099C000B5BB43723BC2FFFE416DB3A47D8F02E67F
-:1099D0001D4BF96D4B0B11EF4748C43FC4C42C7AA3
-:1099E0005FEEF25A2DB02EC19B6E884FE6B116EB9A
-:1099F0005AB2AB023329FE5DCE648CB794B99A2972
-:109A0000CE928B0B8489672B33C8CEF31CE6DF59CB
-:109A10009C1EF7FD449443FF0700378FAE00800083
-:109A2000000000001F8B080000000000000BAD3B91
-:109A30006B705BD599DFD5BDBA926C49BEB2652318
-:109A40001313AEED189CC43137217165089BEB47A9
-:109A5000880D29556CC749769C548140C3B4D36A9C
-:109A60005BBA4D76682DC772E2386014D3D661CBED
-:109A7000B622C0B6BB74C0A52FC8D08E1CB29467E6
-:109A8000715BDAC2B643454ABDA5D31FEE23E0EEB3
-:109A90006427FB7DDFB93796642571D28881C3B90D
-:109AA000E79CEF9CF3BD1FC78DC78E54451B00205C
-:109AB0006EFEB4BE092000E2B7DC3515695B0D30DF
-:109AC000F89A6CECE32FDA643408A084641831004F
-:109AD000A4A7D686325EEC7BA77F0D7E809B6600B6
-:109AE000DADD62ED19FC77DDAC1BDAEBE7FA2D0865
-:109AF00039BBDFE6AECC99BF5EABCE1997C134D28D
-:109B000012C086D0D29C79BE35AB353A6FA7BE3233
-:109B1000E7FBADF5CD39EBA15D3999C1FE5AFCE704
-:109B20004C0DC1137D1EAF06F036603F6BBD025970
-:109B30007D1CAF8BF882D3C5D8F9107CE88C0CB0B3
-:109B4000118CAD10A45187F138E2A5E2983B53EC9B
-:109B5000C0AE69EAC10AC4070DE9007D115CBC060C
-:109B6000FBDE6907E0BC8711865C09D0A8651C9FF5
-:109B7000263C6B13127F0798184164871493E741C2
-:109B800008B404CE5B047149C3BE2F0449EA5F05E3
-:109B9000499E8FBFE483CD004BDC62BDBF0B8C07B9
-:109BA00070BCB8212E49D82FED004346785E634A39
-:109BB000A2736AB85E5E09500969EE5775C0D42079
-:109BC000C337F7D1FACA3DA00D5512D8388FA7FA7E
-:109BD000204EE779040C70C9848F08402D800A312B
-:109BE0006EAF06BD1491088F82B18AFA759021A4D8
-:109BF00022555312F5AF80098DFA006988ACC02652
-:109C0000A304A6DD3C05CEACC37FE957A0A59DA665
-:109C10006DBAE0E4AFDC667647107FBDDBD69444D6
-:109C2000BDE75EA7EC797EA2FDFAB9FE6804915FFC
-:109C30004EDF37003450FB028F3F1589EC88E0F788
-:109C40004684EF5E75F1F86F54053E131218719C4F
-:109C50009F78F696D04E1C8F3FEB36EA80F08BF85B
-:109C600024BE08BB675E6A16EB891E41A407E1BBF0
-:109C7000B40124C2C1554407FCAE221D0E321D930F
-:109C80000C77710C8C016B5FEA57221D882E29D04E
-:109C90008A08AF72ECE2E8C03F8473C533EE4746F2
-:109CA00024C22ED2A5F6B2D0653FE1F162E9924F0F
-:109CB0000FB8B70CA0F97CFBC6998E5F91D21EA994
-:109CC00096C882F4C1FB48481FC26708043D54008F
-:109CD00083F05408FFD4F7AC067D1FF7C57CA2675C
-:109CE000BC798EFF4B90FF455FC85700E920FA8290
-:109CF0004E419217EC872213BCBE741744EEAF247A
-:109D00007A988C3C2744B975C18C446D8D6430BD04
-:109D10006AE58883FAC5525A20192949FAC00F1AF0
-:109D2000D3E74A88711B74CE4C9EC17D125E472AD0
-:109D30005E4DEDD32DB4CFE046D43028B70DBEB183
-:109D400016E6CBBB41AB43BE5BAC9AEE6AE29765CD
-:109D50008A11D7B3F1B58FE1836E1E29A671870FE3
-:109D60004656CFED9B701AA124D2EB75DFF4F12893
-:109D70007E2FAA94C165CCE1F9A453DC8F60CA8B15
-:109D8000481E847C84C27896C07CFD165204DF7A1B
-:109D90007723FE101F3B6800F1240D7F9FBF3FDC3F
-:109DA00026F4DD8391E8EB24C7A49F187F2668A4DE
-:109DB0009F3403586F3AF4F8EF64FC7E6AD8A51319
-:109DC0009F4272DC74E33E3BAD7D760EBBDE91FCC0
-:109DD00059F74CB8206DEBE71A5A1F29617E3624DB
-:109DE00070372D7CDDA5F23FEC292766BB20DFB65E
-:109DF0003CB5B624D370EE792AC94759F63A4127C3
-:109E00003588FCE4A5F11778FC42709C7B2673E44E
-:109E1000CC86E30C45188E73CF09216F64B7909EF2
-:109E200077A1DD1A417C7FD4D454C19733FF45F626
-:109E3000FCF698DF207BCE28C2797724A5D408F2DF
-:109E4000E39D1053894F25581227FAED884BC60819
-:109E50004EA939B8CBCFFE02B46B841F297DA37CF9
-:109E600066F945E0D1C2D38EF47B4EDD4778F5C16B
-:109E70006FEDF19AB9F1BFF4D5BEBE4627A5EDADA1
-:109E800027FA165BF445B51D7F05CFE93C5D02233B
-:109E90001A727FF1175E5B87E71BFA996CC8D5349D
-:109EA0004F0513E11581B0E3C524A7B5C42F13E90D
-:109EB0008F13BFED29D1E8BEF63CB0E6C5216AD2CA
-:109EC0003D8B510F105C47F17DCC9FC57E55979916
-:109ED000F951E364DFC38D7C57C1A8E65FB99A4EA0
-:109EE000937C95B7BA8D815CF8D2195A8F30A1C294
-:109EF000BA87347FFF15D477F350CB196B3FD39DCE
-:109F0000B55F5EDF19CAEA83188F67CF3754486799
-:109F1000E1F5ACBC5872669FDBEB5573E5256F9D90
-:109F20004D8F06A7E08F4008520378DEE1E1D2961C
-:109F300062EC8F064077E1D0FE1B2A2440B96ED533
-:109F4000C43C7F15A45C12EDA38FD4B3DFE865FE9B
-:109F5000F1FFDE4C7F9CF831ECD274C453E08FC625
-:109F60009489FD3B436EC3C4F1419A4FF6B50AFD97
-:109F70002C9DB7FF05F9A57758E7BD82708372F86D
-:109F8000B14DC2CF927DABF7BF82F00F5C29834CFD
-:109F90007BCB1B0DE2CF3B1480B252ECDFE764BFFA
-:109FA0000FFD3BBE8F5A95EBF7DD79C439E717C239
-:109FB0007C3FF0AE4DB97E606C13F0BE749EB2551E
-:109FC0007F3F7CE80BB2FE5CA14C39B40276D5C66B
-:109FD000BFF49497F1FA8372C42BAD8388F929EC0E
-:109FE000BB108FC4AFA8A8FD6B104F84439213DF42
-:109FF0009AEF7C9AE6BB4E21FFD27CD9DBFE29DCAE
-:10A00000CAB908F1C4FADFC9E730F11F3A77BE3F99
-:10A01000ECCA3BA733CF7F962D3A8C107E50FEA121
-:10A02000099A083FE89FB37F00DE60413BFF5C3F39
-:10A030006A0EE4A51FF6BBB94DF76BDC1EEF0F717E
-:10A040007BA25F877674AC5EE8AFE7F6C57E83BF20
-:10A05000BFDC1FE6D6C6C7B9F48DAFDCC1FEC2E1D6
-:10A060007B1D291226A5417BE95AC4C3956FC8AC54
-:10A070003EFCA07B14D4077EC48182F3AEEE505226
-:10A0800026DDC58A7FAEB0F86CB96B66D245FC5D43
-:10A0900009C63E5A08B1813B56CFC53F37CD38E699
-:10A0A000E40428DE299AB33340F14E594EBFCDBDAA
-:10A0B0002867FE7AAD3667DCA6EFD79A85DC6C0898
-:10A0C0002DCF997FB8BD35FD313CAFBFD9A5119FCC
-:10A0D00077EAD7E78CDF5A7F630E3C5B0E4AFB942E
-:10A0E0001CFEF3E7D155DD7DFE38C8A6F38F6C3A30
-:10A0F0005B72702EFAE6F3AD8DD7D2B37815716529
-:10A1000082E24A9DEEDD20ED0C129E6DBFC4848874
-:10A110008FF480D85709637CD978F9E34B3FC59712
-:10A12000D585E2CB7735E2DF0BC6971DB9F1653EE9
-:10A130005E2F145FFE691E3E4B1784CF1D8B63AFED
-:10A14000ADA178EF5599FD40B923C6F6AF6C4A36FC
-:10A150003620DC72CB1FF391CCE3BC1D6B54F62F81
-:10A160000F43264476FF0109B18AFC5FD660549202
-:10A17000BE793260566CA338BFD3611CC525CFB7FA
-:10A180007C39447EC7C1814742689420D8E5607D10
-:10A19000976C99DE4E72A5E8E8C749DC9AA902FEE1
-:10A1A000893DFFB3434E8E431ED8AEA6249CFF804C
-:10A1B0004FEBDD4A7D6B1F4408DBDBF135D7A4C8CC
-:10A1C000FF2BEFD205BF403C44F47F707B53251B2F
-:10A1D0002905FB2B68BAC1767CC46798248789DF80
-:10A1E00079218E9FEE9734BF44FEEB7687F638DEFA
-:10A1F00073BC63D55BBBB07FD0AB1A24F0894053EE
-:10A2000025F197BC03DD1EEC8F758CBDC8725CE731
-:10A21000E07E62FB35AF93FB3C5EAE75D6509CB7DB
-:10A22000BE86300DF233A7FB29AF91084C8768FD3D
-:10A23000E00D62FDB9E8236B59F61C387FC1E79544
-:10A240009738D22AC2919F9BFE3F822767DB71D647
-:10A25000E3B97EC54840A52001CCAE2BFF23BE84C8
-:10A2600054B969121DC751E6094F3BB67795503C6A
-:10A27000B5C399292F642F8650BFA6AFCDF237837F
-:10A28000B97E423E7CFE35117EF1E7105DBDC20A0B
-:10A290005DF097B8EDE6549AF006C98E1AB2CB5E1F
-:10A2A000B4CB709EF8CF9B8B071B3EC3C3FFC87B0C
-:10A2B0003CA6270B0F78AD34F93BBD5D12F3CD966C
-:10A2C000B37C001C77D8E7523A1CBCCED60FC8C767
-:10A2D0005B27883F2CBC87D064901CDAE7885AF053
-:10A2E00076CEC103AD22EB1C6B550B9EC171F1758F
-:10A2F000AA902BF885CC7EC73C3A59FE1BAFAF9E87
-:10A300001B57ACF35F7B44CDD1BF9FA1FD71DF5FD5
-:10A31000F6759F375E5E9ACA5D77B80BF8DCCB6442
-:10A32000F3F834C5B5D73A528F23A8E5D73A589EEB
-:10A330004FA15F4576ED5CF06CFAB388553077A19C
-:10A34000D38EFE59B08BF9FC5CEBD4D49459DD4824
-:10A35000FB426C02F96B6928F75CF6BCC367EFF54A
-:10A360001928A2F3A0434EF6C8954A9BA4A75D08FE
-:10A3700047C2B6FE917BB4F3DDDB0559F0119FEFC8
-:10A380004A425FC503C0F74DBC9562F98167667E9E
-:10A390004BF29D585AA18FB0BC40684913F923E293
-:10A3A0005ECE3C3A8D78049CB195C24F1DB3FAF154
-:10A3B00015022E64CB29AEF7587995AF77D5F2BD4B
-:10A3C00054D2334464C55C4C7CE155BE15D7901F14
-:10A3D0008ABC872180AD2BB8334EEDBAC5FA681818
-:10A3E000CF35B6D4C1766CCC177D6488F4D0526F6B
-:10A3F00041F9F81EE945843F4C7CCBF113980E924D
-:10A400003BC91612883A905EE3CCF9002F750544DB
-:10A410003E4B4B866F473C1EB7F802EFC3EBF3E1B0
-:10A420009F980FFF31E2D784059CE0EC44382F5B06
-:10A43000720164502AACB80FF773EBC930F90BAF57
-:10A440007469425E949506DD7F2C5078BF57ACFD51
-:10A450004C474CA27957F489F5E016EB1E9066B68E
-:10A460009E14F46479A2FD69BCD8C8D50FF9703D7B
-:10A47000F5B9FA4AADCA9DFF96C57FF9F1D0FD52F4
-:10A48000E173FEAF75DF758B81ED11F1C5BE027C06
-:10A49000912FEF2AE53F11EE7B4407C697D03B5E34
-:10A4A00065AA95E21E6F0318ECA328937CDF7DC597
-:10A4B000B7719C3C74ABC873A88AD0DB555B110C98
-:10A4C000DAE3C80FDAE3D497EF01CD15988F878BC5
-:10A4D0008DF7C8DEC4B3D69F26FE2817F78867DD40
-:10A4E00023E9D46FA37D930765203F20B9D7B5B585
-:10A4F00090DD862EE7593DE9B6F52ED20D8C6A70B7
-:10A50000E0FA236FC89C173812DECF717122A2EADD
-:10A510005235E5291E86BD38FE17D3C17EEB9E67F6
-:10A52000EEFDCDCBB8EC647B4D93E46039823B719A
-:10A53000FE498C8BC96F26F9CBC9C72062DD4D73EC
-:10A54000FB25DB6B78BF04EE279D47CF29118C5B81
-:10A550001BE7C33B6B8FF3F223231551BD1BEF7732
-:10A56000D86B703E52B6F3233DC105E5757448A61D
-:10A57000F7905EE903C683AF730CF6523E2124E2E6
-:10A580008CE36B5C82BFF64A567C06ED60EB29FCDF
-:10A590006DECD31F2A23FBF2A60BEA70BCF589579A
-:10A5A00015EA8F553A9A287EBE4ECD1CBA8EC69BB0
-:10A5B0009CAC3F5A9092E91CFE48BB1C213E8F6A1E
-:10A5C000B5B268D312B56DEEE21C7DBD5ECB8D3F9A
-:10A5D00046678FCB25C49F1A1812E279B4C5304B59
-:10A5E00048F7189941FA3EBA5E374674F28773E32A
-:10A5F00094D14E55E8D36A6177C626F587C8BF3A2D
-:10A60000B0C7C3FEE7FD550E71EF2590227EE8D45A
-:10A6100073E39AB1899A834B48CE924ECE977F735B
-:10A6200042CCDF35B0324571A966F9ABBB2A5BD9A4
-:10A630000F852131EFD6FAE579F79FD2882F927BEB
-:10A640009D40F83F5075FB30E543DF4938AF277137
-:10A65000F96EB7CE726AD36DE7D09D5C271A52614E
-:10A660001B9D7F74BBCAFC3F5AFECE913B484F975F
-:10A6700017319EC7B7AB95D12C7978AFDBC570C6C3
-:10A68000B70BFFA2DC01D18902E3EF750BBDF2E14C
-:10A69000BB81EF43F90E1D3FE94A2CED227C5401AA
-:10A6A000FC2B5D27F4EE97F8FE1D0EA8C3238E0544
-:10A6B000FBD87FCBE7B30FBAEB72CEEF0A3B72F059
-:10A6C000E87445629CE7BE1574D257ED1DD8A7F813
-:10A6D000BE4F05E23757E81EBE6729F63DD87777AB
-:10A6E00024E30AF6DD4BA2D793DFFAFCDE2DC32D5F
-:10A6F00041B25F0E8DF8CDD57757A49BE6AF768239
-:10A7000007C78740974274CEB804A4AF7588769087
-:10A71000BF3E16726894B7D998D8BC9BF6DF182C48
-:10A7200002A2F38E4E07EF77CA543969554E8E0652
-:10A73000E5BF2ABC6C77DF76C61EDA82F3DF467A85
-:10A74000C561EE5E8F76D7F03D3D7A6EFCEC8624D7
-:10A75000DBE1B5E6541FEDB336AC5245038E374FFF
-:10A760001F217F7D7C8DCB70E1B9C69B25C6F7FB91
-:10A770006B9C293C2AFC509D9269DF1FBE8FBC5107
-:10A780005D487ECF2F37F9F347C35D6EE287FD301A
-:10A79000D543F889CF8A3C54FEBC253D82FEFB118F
-:10A7A0002F84E7389EB78EE2A219942B841E988DD1
-:10A7B0007C837244DBBA15D61F9FAD74C4A92E7476
-:10A7C000A053653939E08B0E57531FF99DE3A16003
-:10A7D00094F979AC32C87268EF33D6DC5B4FFCF287
-:10A7E000DA1A0FFBED7D3FFBD5DDE4B7B7CA7FFC7E
-:10A7F000F653143F55A94CCF03CE48FA65E2EB4E11
-:10A80000E12F9EB8EA9F59EE86FA6E07C21BC46319
-:10A810006F52DD6A687533C3B7F30D6357897CD215
-:10A8200050F0D3F15DD84F87457EC12C3F2A01EB14
-:10A830006791576AB1F4D87257ECA53A5A77B722A4
-:10A84000EAC2725582F4816B91C8BF998A3327EEB0
-:10A85000BD6926370EBE322F0ECECF33817B6A49BB
-:10A8600037DAD39F775B79372BAF445760395EED8A
-:10A87000E278713C2CE2A0A43356A935CC97E31FB3
-:10A880005B7EF054BF1B3900E0A7FD1AF7FDE69F81
-:10A8900006CA10D41BFD21FEFE91B58F48D9EB46A8
-:10A8A000576F76EBAC373221829BAF2FF2F9E08EF7
-:10A8B000EE22E6038CD380E83B3A038C5F5FF3AA79
-:10A8C00034F1E9A9BF02C7A1FFD03EE5859AF9EBB3
-:10A8D000D3744E17E5BFC4394FD0395D94FF12E7EA
-:10A8E0007BB15FE7F6E5FE7A6E57F680C8F3DBFAD8
-:10A8F000E06AD40788B7F62AD127F9273B5C1ABC4F
-:10A900003D42FCE50A291AC9B7BB2A9996B2F4C19F
-:10A91000B82FF616D9E503E55EE6BFFC73057A1C91
-:10A92000D6BD62DB08EE28C225BC3FBFF77FBE5410
-:10A930004BFBBC21335F95F6F5EE66BD837AC1C350
-:10A94000FE86D087C9722FE71DC6F7D64921ECEFE6
-:10A9500018108EEE05E51EF749E1BAE3A8AFA97F0E
-:10A9600000E59CEE73A0F99D8FD33EEFFFAD882AE2
-:10A970007C48EF5FB0DCBF860148D965947B5BCE35
-:10A98000BEDFFDA4157F47B63C23EECF7A70DC37DF
-:10A9900095A4FB1FF8B90C85F076A9740573617E48
-:10A9A000484A99993C132C50373445DD7070E23B8E
-:10A9B000DC8F6F04A8C3FE579DA69BF8E0AB038E07
-:10A9C000F3D60DBF3A70FEBA61EA8B0E706973E779
-:10A9D000580419CEB352084F75C0211AC2B6A92720
-:10A9E0007A5B0FFBCBA2AEA83753CE81FA5A11F98E
-:10A9F000CF4F45CC8FF4909F1914F9AE9032912629
-:10AA0000BB1EA27AB94EEF17E25CF7D4280C5B3973
-:10AA1000FFFE83CE4C2BDF0FA750BD32BF3E2979FE
-:10AA2000BF27EAFBB5A20E69D7271BD5CCD143843B
-:10AA3000A76D6EC6C3E0B337BC49F52FBB8E1FB2FE
-:10AA4000EAC0DA6ED006C43D3EC6E77C4ED443E190
-:10AA500006BCC74ADA2453B36905D7373F41E31729
-:10AA60003AFF42EB861B2DFD86CC9D2279FE8D851B
-:10AA70004F7BDE80258FD7A9226F0D7E95F57CEB6D
-:10AA8000135E90C95FF6A947494E7642663DC9D329
-:10AA90006040F86D89C34EF6DBF6F5E8BCBE5C3568
-:10AAA000F9FD42F9BF788C01049398D4FC9447AA2D
-:10AAB000EB36F7F5F039923D5D748E6199F5DDDB8B
-:10AAC00075EBE3C41F9D5209CBA3A2998BB3F5E5A7
-:10AAD000A33D3539F9F84EF8A242EF5CD62D9EE938
-:10AAE000E2FD7D0EA0782BE1315ED409DF3F5018E6
-:10AAF0006E27A4DAF9BEBB346918EF39E83DC9F412
-:10AB00005957E75A49FAE951CBBE267C85E3BA7F0B
-:10AB1000EB11F1E7FA4DD187E9DCB7C04C1BE937FF
-:10AB2000146D23CEEF5A445EE751D29722AEB9D7C7
-:10AB3000D13497D77AC9197D94D699DF14FE842B26
-:10AB400024FC7A279869C2D7AB9BCCC7888F371271
-:10AB50009FAF6645058FAF9C7F8E27AC73F4F69848
-:10AB6000FF49F08E59FAB95133B9EEDA080E633065
-:10AB7000985557D717565797B4EF897AFA8D828F21
-:10AB8000E1B9B8E0C356D0489E90FF8ED1F9ECF7FA
-:10AB9000258DC7765773DDE512EBDBEF6F328F1330
-:10ABA000BC3F442227E81E6FEFDD020C6F81EF35BA
-:10ABB000D62DCE8422642F3DC26F7EB2C5D81AC96D
-:10ABC000CAFF9CB2F8F79445D7E5C84E53942F506E
-:10ABD0000CB6E3D740D84DFA211F7EA21F26A8EE5F
-:10ABE00073AEFD9D074FBA294F3C186E75D37BB4E9
-:10ABF00084B7B584FAA3556688F61FEAEF78F6DDC8
-:10AC00003AE223C1F7F166918FD88FFA39EE9A8331
-:10AC1000F3871E99CFD5168634E5D3FD5EE117F98B
-:10AC2000315ED4918FFCC130DB73FC3E41A9833F80
-:10AC3000933C51BC1D32C0A478321C05920BBF3628
-:10AC4000B79E4C5E5B380374AE73C191AB70BD9719
-:10AC5000D6C718DFE59B353E872BE4988BE361E18F
-:10AC6000F8DA4FF8AA3B4FDE8DF0D5706E7C9DC5AB
-:10AC7000BB2577F978F26D96F9DECF07A6F95E70FD
-:10AC8000BA8DF3227E547854CF2FDB2CF48CEC3524
-:10AC900021EAA37A5994EF970864C06898C32FFA01
-:10ACA0008A8C5F59CBF03A7FD880E80AC2478CF192
-:10ACB000997FFFC663DF6827BCBDB453E8D5758AAA
-:10ACC000A53F627817E4CF7FB2F41B5876A9D3234F
-:10ACD000ECCE46F88957E4B5059F36A23BEE2E9D93
-:10ACE000AF5FEDF6492BAF9CFFFDE79B3D220FA028
-:10ACF0004FB07E1FEC10F07D3EE1871E1D5EC5FE4D
-:10AD0000C3CD957545D9FAF172D709F3EB8217AA2D
-:10AD100003CEF18DC974FF8B7632BE493F377F1C5D
-:10AD2000B2E46DA8DF5D50EE0E2D8E840C92AB6602
-:10AD3000330E48B7FD814C88F86768F23DF693956D
-:10AD4000576583FC4D458900CDBBB93CC3F4DF108A
-:10AD50003681EA4A87FACD6F65C3FDECA668F766CF
-:10AD60007A27A44D9804C70BE938D9A35BCACC58FD
-:10AD7000A4001D3EBA59E4FF5EDD14D9B699F40E65
-:10AD8000E9CE55E86B45CC7FA4FE42F5D57C79EA47
-:10AD90007093BDB87479EA72D3FD46AB22FC4E6B5A
-:10ADA000F42732795873FEA5254FA3CDD3AC276C79
-:10ADB000B9FADCE63CBD13B4F44ED064B9F8FC66D5
-:10ADC000DDCA0347583E9C244FD97A2668EB199375
-:10ADD000E55109DAF264C91FC9137EBFCE39D346E3
-:10ADE0007ECA1088778CF9F235BE299A203A5C57D2
-:10ADF000FEE7EE6A7DEEFDA7AE0B791AADB2F8BDA7
-:10AE0000F969E6FF53C8FFF45878D05B93C3EF7637
-:10AE1000BB7656863492E2A65989DB7F982DE6767A
-:10AE2000DDAC875B73B68CDB96D900B7ADB38BB85E
-:10AE30006D9BADE4B67D16F9FE7AE4FFD96A6E6FBC
-:10AE40009E5DCEED86D9A5DC76CC5ECFF33A675712
-:10AE5000727BCBEC8DDCDE3ADB2CF6A19A5069419B
-:10AE6000FEA772D665E07F234EF5D1A1C9BBDF24D2
-:10AE7000FC383595F328894013D77B9C4A86F9FF27
-:10AE80006858D8870D5E419F7CFE7F7553F4DB8543
-:10AE9000F87FD009CF90CB95EF27A0BFF32CF1B965
-:10AEA000E47DE16F9CFF740A3F07FD8F63CCFF9741
-:10AEB00068FFCFFA9515B97EE56879AE5F39D46C35
-:10AEC000FB95AE14D5C176493ABF137B7F53F4C7C7
-:10AED0009B59FF4676D278B4C7AD913F9508DC1CEC
-:10AEE000F2627FC77E1928DF87FEC514CF43FD407D
-:10AEF0007663A1F29AB6DEF7DAF31BE1A4237611AA
-:10AF0000FEC9DBF4BFCD85E4BEDE734976D4D92615
-:10AF1000E45E13729FA88A0C53BE259127F7B61DD5
-:10AF2000453CE4C8FDFBB6DC5B725C1A14EF3E4A9C
-:10AF300049EE919EA7CFCA7DAE1D55ACF9CE0E51FC
-:10AF4000DF6A0B0ABDAA74087DA168B97614F905F9
-:10AF50007A0BF8137145F04D67DD77CFDA33B2AB7A
-:10AF6000A5C18054825B6B7FCDC489FD26955A961E
-:10AF7000EF7C394A68AB98CF2795362824FF0B968B
-:10AF8000A3806D474CB623F9F36C791A9AEC64BC34
-:10AF9000D8766512EF6D66D9930D9AC003DA93AB3C
-:10AFA0007A0BC8D3BAC5663452E09C2B7A85FFFE73
-:10AFB000CA4D11E12FA29F487E4AC259D80F58D1DD
-:10AFC0002BE856DA9154086FEB758895A11EECE8D2
-:10AFD00048B7510D03E579452FC2BBC9CC0C920C83
-:10AFE0000E7AC782747E94CF463AD7A5CA67D9260F
-:10AFF000AB2EB7A78CFD16BBBD10DFDBFE8ECDFFE1
-:10B00000F9F39EAC36B716C2CB915EE1AF1F1D7E41
-:10B010003A873F924AED2D865E50AF9AC665D1AB16
-:10B020000BF32B26D1CEB15E3DB75FB183E8B050B4
-:10B03000BFE2CEDEB37EC52EA2D3BA06E1571CE92D
-:10B0400085CBEB2FB4D8F1CAA5F90B9FEF3DBFBF5D
-:10B0500030D8ABF3B8827E35E90DBFA5372ED65F69
-:10B0600028E01F1CECE5387A46A6FA1FA2DA10F990
-:10B07000105117453D733FE10DE378F6178E7A05C1
-:10B08000BF988A6D9F220FD078D214FEC2E592033A
-:10B09000F4FB1EEA2D5FB83C2C745EDD636B8733D6
-:10B0A000E4E7802F49EFA607E9BD12C58FBFF689F7
-:10B0B000770400F594F7FF9CBCCC203B375EFC8501
-:10B0C000AFD1FC3D7105E8DDE083FD22FF374AF991
-:10B0D000BF6BB1EF8C7D9DC6F70FB8B4A308EF83AB
-:10B0E000227FDC813CF58167718ADE051DB3E4CDEA
-:10B0F00005DB4B0AF1D5DCF9C4FB5C7ABA7286FF3A
-:10B10000AEA34AE33CB98D1F350271843FB2C2C180
-:10B11000F591910F7FF3C8ED74EE0FBB0DAA3F714F
-:10B12000A115FB65CB429C47476F10C25979111995
-:10B130009469CAC70FD31BF5ACFA6B7023C6D159FB
-:10B140007146493892D3D721CAFB1E0E3A18EEA198
-:10B150007611171DF24EB8B502FAE5BEFEDC774A4D
-:10B16000F9ADBCE60D7E273856AF70DDE7FED54B56
-:10B170003A494E0E2EE14A3114D53922A902727C89
-:10B18000DA92631D740FE1D1D3D95552C8AED8ED10
-:10B1900060DE39642D6A92BE2EAA4E46888F8BEAF5
-:10B1A00082523C0B0FBFB4E08F48F1F43A7E8F26F9
-:10B1B000EC04C5BBF44E65A8FC2EAE47BA31DE9F49
-:10B1C000C6EF6EB44BBFC5B6AC428D163A2F6C11AC
-:10B1D000F99011672A42741959AA709D1279AA60D0
-:10B1E000DEEBF796BD2AAA1BE3F3419DC275A7FCCF
-:10B1F00079BFB2E7A949AE631CACFB779DE4EEE0F2
-:10B2000055C0F9EDFFFEE5AE270648BFF4231D9DAE
-:10B21000C4AF1DDC162DFB06E37DB451D1E81EEB57
-:10B22000E5B5035C27DA0806F927F97C50BC62898A
-:10B2300087F39D1D0EF6EFF2F9A20819758AFC340A
-:10B2400025C376C2092FB2DE1C3544DCA463B42AC0
-:10B25000FA825FEC7A53D0E2C7FC7B8D5A72B5DF7D
-:10B26000CAAB97587F8733D6F167AEF78E2E4EB3B1
-:10B270001DB9AF251DA2BAA13FE836285439D01C0C
-:10B28000E1FCF6E84A07FBADF3E0AE147A39FF3C87
-:10B29000CEE3EF09FDA888FC85BF4191C8EE7CC9CB
-:10B2A0003AC70653C8931616FE9BD613030D0F5FBD
-:10B2B000FE869CD2711F69D9EFE34E1C4F6E136F4F
-:10B2C0008B8B54912753CD9B07C8AEFDB8520629EE
-:10B2D0004C82F70983F36D1121DFF6BBEC8A1E3532
-:10B2E00027BE2F81AC3EBF53C9ED83DC77DEF76606
-:10B2F0007B7E7DF7EB27B2E0B56EC9ADB35D68FD2F
-:10B3000007FDBB5F3F817C32669C5FAE6CFA24FB1D
-:10B31000C342FF59FC65F31B8580F428F85CEB1FE2
-:10B320000C440BFA25FBB6083D79217DA4B9A23166
-:10B330005A7FF8A65C387759F2769705C7B558ABAF
-:10B34000E479D63BA7C31ED8FA74817B8D6C517902
-:10B35000FE1C3FDB7EC08B9796875BD123E2876024
-:10B360008D87EC30E2F345D21F7F0DAA7A367F0E2F
-:10B37000F972FD50DB0FF8E9162B0F575E21D1FA59
-:10B38000806EDBF1DC3C41BE1D2F72A6382F5DB410
-:10B3900054B5F50CEB830F7AEF79224EF2933EC849
-:10B3A000FE9E8AFC4BF5BC32328805E804A1DCBF66
-:10B3B00013D9B205183F65FAC4542BDEA32CA27032
-:10B3C0003D4449829126781B8BF8EF3FE877BA8994
-:10B3D000EC1C70509B6CFB24A471FE03B58AC1EF7A
-:10B3E00008C1D9FC2ED9DD2A3FD7516DB9B810BD9F
-:10B3F000ED73D17BB1DC77F017270F8F6DB1DE6570
-:10B400007BC023E461A36388F31D8E14BF85477955
-:10B41000579AAC9202D5FB4908703C48EF8224ABA6
-:10B420008E543B272770ABF56E73B7783FC37F5FB1
-:10B43000584B7F0F9AE1BF1BBC9A5EB7CA82AE24FD
-:10B4400027A7A0CA4175E2F871493AEB1F2DA2A7C0
-:10B450008E8683D62D8108B7F9E7BE0662FCBD1E35
-:10B4600092DC2E83096E1B608ADB4698E196D41528
-:10B470009DC73821EA1DABC090E9FB6A8870DB04E8
-:10B48000316EC390E4F6CB6D9FFCD64EA4C38FE61D
-:10B49000E145E0B5805CA711E8D9FBDB78FEC21678
-:10B4A0007D41723B14107993B6709AFD7AAF1EE11C
-:10B4B000B8CF19147C6DC3719E234FFCF7FA4FF976
-:10B4C0007F5FF2FF519E9355203F00000000000077
-:10B4D0000000000000000000000000180000000054
-:10B4E000000000000000004000000000000000001C
-:10B4F0000000002800000000000000000000001014
-:10B50000000000000000000000000020000000001B
-:10B51000000000000000001000000000000000001B
-:10B520000000000800000000000000000000000013
-:10B5300000000000000000000000003900000000D2
-:10B5400000000000000000380000000000000000C3
-:10B5500000000000000000000000000000000008E3
-:10B5600000000000000000000000000000000000DB
-:10B57000000000000000000C0000000000000000BF
-:10B580000000000E000000000000000000000004A9
-:10B590000000000000000000000000180000000093
-:10B5A000000000000000001C00000000000000007F
-:10B5B0000000001C0000000000000000000000135C
-:10B5C00000000000000000000000003A0000000041
-:10B5D000000000000000000100000000000000006A
-:10B5E0000000000200000000000000000000000158
-:10B5F000000000000000000000000010000000003B
-:10B6000000000000000000500000000000000000EA
-:10B610000000000000000000000000000000000327
-:10B620000000000000000000000000AB000000006F
-:10B630000000000000000008000000000000000002
-:10B640000000C00000100000000000080000C0085A
-:10B6500000100000000000020000C0000010000008
-:10B660000000001000009FB0000000000000000873
-:10B670000000C08000100000000000040000C0882E
-:10B6800000100000000000020000C0800010000058
-:10B6900000000010000091200000000000000008E1
-:10B6A00000009340000100040000000100009348E6
-:10B6B00000000000000000020000935000000000A5
-:10B6C0000000000800009354000000000000000289
-:10B6D00000009418000000000000000800009358CB
-:10B6E000000800000000000800009AB000400000C0
-:10B6F00000000040000093980008000000000008CF
-:10B70000000093D80008000000000008000094200A
-:10B7100000C8000000000098000095B000980000EC
-:10B7200000000028000095F00098000000000028AC
-:10B730000000C480054000300000054000009D204E
-:10B74000000800000000000100009D21000800002A
-:10B7500000000001000020080010000000000010A0
-:10B7600000002000000000000000000800009CD83D
-:10B77000000800000000000200009D18000000000A
-:10B7800000000001000000010000000000000000B7
-:10B79000000000090000000000000000000000029E
-:10B7A00000000000000000000000CF2000000000AA
-:10B7B000000000200000CF46000000000000000153
-:10B7C0000000600000200000000000200000730066
-:10B7D000000800000000000800009FA0000000001A
-:10B7E0000000000100009FA8000000000000000110
-:10B7F00000009F60000000000000001000009F6338
-:10B80000000000000000000100009F610000000037
-:10B810000000000100009F66000000000000000121
-:10B8200000009F67000000000000000000009F680B
-:10B83000000000000000000400009F6C00000000F9
-:10B8400000000004000000520000000000000000A2
-:10B8500000000003000000000000000000000003E2
-:10B8600000000000000000000000000500000000D3
-:10B8700000000000000000020000000000000000C6
-:10B8800000060000000000000000002000009F7083
-:10B89000000000000000000100009F900000000078
-:10B8A000000000080000005300000000000000003D
-:10B8B00000009F98000000000000000200009F9C14
-:10B8C000000000000000000100009F9D000000003B
-:10B8D000000000010000000900000000000000005E
-:10B8E0000000000100000000000000000000004413
-:10B8F0000000000000000000000000010000000047
-:10B9000000000000000000500000000000000000E7
-:10B91000000000890000000000000000000012C8C4
-:10B920000080000000000080000000010000000016
-:10B93000000000000000A000071000000000071039
-:10B9400000001AC800000000000000080000AEC09F
-:10B9500000080000000000080000AE4000080000E1
-:10B96000000000080000AE80000800000000000891
-:10B97000000020080010000000000010000020005F
-:10B9800000000000000000080000A01007100040A8
-:10B990000000004000001BF800080000000000014B
-:10B9A00000001BF9000800000000000100001AD090
-:10B9B000000000000000000100001AD80000000094
-:10B9C0000000000200001ADA00000000000000027F
-:10B9D0000000000000000000000000000000AF00B8
-:10B9E000000000000000002000001B78002800007C
-:10B9F000000000040000E000002000000000002023
-:10BA00000000F300000800000000000800001AF029
-:10BA1000000000000000010800001B3700000000CB
-:10BA20000000000100001B0F0000000000000001EA
-:10BA300000001B70000000000000000400001B74E8
-:10BA400000000000000000040000005000000000A2
-:10BA500000000000000000030000000000000000E3
-:10BA600000000005000000000000000000000006CB
-:10BA700000000000000000000000000700000000BF
-:10BA80000000000000001BC80000000000000001D2
-:10BA900000001BE80000000000000008000000514A
-:10BAA000000000000000000000001BD000000000AB
-:10BAB0000000000400001BD400000000000000048F
-:10BAC00000001BD8000000000000000400001BDC88
-:10BAD00000000000000000080000B0000018000096
-:10BAE000000000180000C0000040000000000040FE
-:10BAF0000000C00000400002000000010000C00182
-:10BB000000400002000000000000E20000200000F1
-:10BB1000000000200000E2040002000800200002F3
-:10BB20000000000000000000000000000000E20033
-:10BB300000080020000000040000F40000280000BD
-:10BB4000000000280000F540001000000000001078
-:10BB50000000F5C000200000000000200000F5C03B
-:10BB600000020020000000020000F300002000009E
-:10BB7000000000200000200800100000000000105D
-:10BB80000000200000000000000000080000110874
-:10BB90000008000000000008000011680008000014
-:10BBA00000000008000011A80008000000000008C4
-:10BBB00000001240000800000000000100001241D7
-:10BBC0000008000000000001000040000020000408
-:10BBD00000000010000059000030001800000010A4
-:10BBE0000000590800300018000000020000570053
-:10BBF00000080000000000010000570100080000DC
-:10BC000000000001000011E8000000000000000139
-:10BC1000000011F00000000000000001000011F819
-:10BC200000000000000000100000124400080000A6
-:10BC30000000000400004000002000000000002080
-:10BC40000000530000100000000000100000153834
-:10BC500000000000000000010000000300000000E0
-:10BC600000000000000000000000000000000000D4
-:10BC700000000001000000000000000000000004BF
-:10BC80000000000000000000000015080000000097
-:10BC9000000000010000152800000000000000085E
-:10BCA00000000050000000000000000000008308B9
-:10BCB0000080000000000080000000010000000083
-:10BCC000000000000000200800100000000000102C
-:10BCD00000002000000000000000000800008410A8
-:10BCE0000008000000000008000084700008000048
-:10BCF0000000000800060000046000280000046046
-:10BD000000008520000800000000000100008521DF
-:10BD1000000800000000000100000000000000001A
-:10BD20000000000000008408000000000000000186
-:10BD3000000084F40008000000000002000084F607
-:10BD40000008000000000002000085040010000050
-:10BD500000000004000087600000000000000020D8
-:10BD600000006000002000000000002000007300C0
-:10BD700000080000000000080000000300000000B0
-:10BD800000000000000000050000000000000000AE
-:10BD90000000000600000000000000000000000796
-:10BDA0000000000000000000000088080000000003
-:10BDB00000000001000088280000000000000008CA
-:10BDC000000000500000000000000000000088108B
-:10BDD00000000000000000040000881400000000C3
-:10BDE00000000004000088180000000000000004AB
-:10BDF0000000881C00000000000000080000300067
-:10BE00000040000000000008000030080040000072
-:10BE1000000000280000339001C00010000000085E
-:10BE20000000320000200000000000200000372049
-:10BE3000000000000000000800001020062000386C
-:10BE4000000000080000A00000000000000020002A
-:10BE500000003EA9000000000000000100003EC8F4
-:10BE600000000000000000020000000000000000D0
-:10BE7000000000000000600000200000000000083A
-:10BE80000000400000080000000000010000400128
-:10BE9000000800000000000100004040000800040D
-:10BEA00000000002000040600008000400000004E0
-:10BEB00000004000000800000000000400004004F2
-:10BEC00000080000000000040000404000000000E6
-:10BED00000000008000040480000000000000008CA
-:10BEE0000000800000000000000000100000504032
-:10BEF00000010004000000010000500000000000EC
-:10BF000000000020000050080010000000000004A5
-:10BF10000000500C0010000000000001000052C79B
-:10BF20000000000000000001000052C600000000F8
-:10BF30000000000100003000003000180000000484
-:10BF40000000300400300018000000040000300839
-:10BF500000300018000000020000300A0030001815
-:10BF6000000000020000300C00300018000000014A
-:10BF70000000300D00300018000000010000300EFD
-:10BF800000300018000000010000301000300018E0
-:10BF9000000000040000301400300018000000040D
-:10BFA0000000500001000080000800040000500460
-:10BFB00001000080000800040000000A00000000EA
-:10BFC0000000000000005068010000800000000137
-:10BFD0000000506901000080000000010000506C6A
-:10BFE00001000080000000020000506E010000808F
-:10BFF00000000002000050700100008000000004FA
-:10C000000000507401000080000000040000506631
-:10C010000100008000000002000050640100008068
-:10C0200000000001000050600100008000000002DC
-:10C03000000050620100008000000002000050502B
-:10C040000100008000000004000050540100008046
-:10C0500000000004000050580100008000000004AF
-:10C060000000505C01000080000000040000507CD3
-:10C0700001000080000000010000507D01000080F0
-:10C080000000000100004018001000000000000443
-:10C0900000004090001000000000000400004098E4
-:10C0A000001000000000000400004110000000002B
-:10C0B0000000000200004112000000000000000229
-:10C0C00000004114000000000000000200004116C2
-:10C0D00000000000000000020000604000080000B6
-:10C0E00000000002000060420008000000000002A2
-:10C0F00000006044000800000000000400006080B0
-:10C100000008000000000008000060C000400008B7
-:10C1100000000008000060000008000000000002AD
-:10C120000000600200080000000000010000600440
-:10C13000000800000000000200006340000800004A
-:10C1400000000008000063800008000000000004F8
-:10C15000000063840008000000000001000063C0CC
-:10C160000008000000000002000063C40008000096
-:10C17000000000020000640000080000000000044D
-:10C1800000007000001000000000000400007004B7
-:10C190000010000000000004000070080010000003
-:10C1A00000000004000090000008000000000002F1
-:10C1B0000000900200080000000000010000900450
-:10C1C000000800000000000200009040000800008D
-:10C1D000000000020000904400080000000000027F
-:10C1E0000000904600080000000000020000964891
-:10C1F0000008000000000008000090800008000017
-:10C20000000000020000908400080000000000020E
-:10C210000000968800080000000000080000804030
-:10C22000000800000000000100008041000800003C
-:10C230000000000100008042000800000000000132
-:10C2400000008043000800000000000100008000A2
-:10C25000000800000000000200008002000800004A
-:10C26000000000010000800400080000000000023F
-:10C27000000080C00008000000000002000080C232
-:10C280000008000000000002000080C40008000058
-:10C290000000000200008080000800000000000193
-:10C2A0000000808100080000000000010000808282
-:10C2B000000800000000000100008083000800006A
-:10C2C0000000000100008084000800000000000160
-:10C2D000000080850008000000000001000080864A
-:10C2E00000080000000000010000600000080000DD
-:10C2F00000000002000060020008000000000001D1
-:10C30000000060040008000000000002000060421D
-:10C3100000C00018000000020000604000C00018CB
-:10C32000000000020000604C00C00018000000087F
-:10C330000000604400C000180000000800006057C2
-:10C3400000C00018000000010000605400C0001888
-:10C35000000000020000605600C00018000000014C
-:10C360000000664000080000000000080000668031
-:10C370000008000000000008000066C0000800007F
-:10C38000000000080000DA4200180000000000026F
-:10C390000000DE4000000000000000000000E0009F
-:10C3A00000000000000000040000D0C000000000F9
-:10C3B000000000040000D0C40000000000000004E1
-:10C3C0000000D0C800000000000000040000D0CC35
-:10C3D00000000000000000040000D0D000000000B9
-:10C3E000000000040000D0D40000000000000004A1
-:10C3F0000000D0D800000000000000040000D0C001
-:10C4000000000000000000200000DB000000000031
-:10C41000000000040000DB000000000000000068D5
-:10C420000000B94800000000000000000000D0003B
-:10C4300000000000000000040000B0C00000000088
-:10C44000000000040000B0C4000000000000000470
-:10C450000000B0C800000000000000040000B0C0F0
-:10C4600000000000000000100000D6B00000000036
-:10C47000000000040000D6B400000000000000042A
-:10C480000000D6B800000000000000040000D6BC88
-:10C4900000000000000000040000D6B00000000012
-:10C4A000000000100000D348000000000000000859
-:10C4B0000000D358000000000000008000000010C1
-:10C4C00000000000000000000000D3580000000041
-:10C4D000000000080000000006002200000000002C
-:00000001FF
diff --git a/firmware/bnx2x/bnx2x-e2-6.2.5.0.fw.ihex b/firmware/bnx2x/bnx2x-e2-6.2.5.0.fw.ihex
new file mode 100644
index 00000000000..aef9aa62242
--- /dev/null
+++ b/firmware/bnx2x/bnx2x-e2-6.2.5.0.fw.ihex
@@ -0,0 +1,15456 @@
+:1000000000005310000000680000070C000053803F
+:100010000000318000005A90000000B000008C18F1
+:100020000000C13400008CD0000000D800014E0850
+:100030000000F1F000014EE800000074000240E012
+:100040000000525C00024158000000B8000293B862
+:100050000001213C0002947800000FFC0003B5B8B9
+:10006000000000040003C5B8020400480000000FAF
+:1000700002040054000000450204005C0000000679
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040258000000360204025C000000365F
+:10017000020402600810000002040264081000007B
+:1001800002040004000000FF02040008000000FF59
+:100190000204000C000000FF02040010000000FF39
+:1001A000020400140000007F02040018000000FF99
+:1001B0000204001C000000FF02040020000000FFF9
+:1001C000020400240000003E020400280000000099
+:1001D0000204002C0000003F020400300000003F39
+:1001E000020400340000003F020400380000003F19
+:1001F0000204003C0000003F020400400000003FF9
+:10020000020400440000003F020404CC000000018E
+:1002100002042008000002110204200C0000020069
+:10022000020420100000020402042014000002193D
+:100230000204201C0000FFFF020420200000FFFF3A
+:10024000020420240000FFFF020420280000FFFF1A
+:1002500002042038000000200604203C0000000FAB
+:1002600002042078000000210604207C0000000F1A
+:10027000020420B800000001060420BC0000000FAA
+:10028000020420F800000001060420FC0000003FEA
+:10029000020421F800000001060421FC0000000F08
+:1002A0000204223807FFFFFF0204223C0000007F07
+:1002B0000204224007FFFFFF020422440000003F27
+:1002C00001042248000000000104224C000000004C
+:1002D000010422500000000001042254000000002C
+:1002E00001042258000000000104225C000000000C
+:1002F00001042260000000000104226400000000EC
+:1003000001042268000000000104226C00000000CB
+:1003100001042270000000000104227400000000AB
+:1003200001042278000000000104227C000000008B
+:10033000020422C00000FFFF020422C40000FFFFED
+:10034000020422C80000FFFF020422CC0000FFFFCD
+:100350000C042000000003E80A0420000000000153
+:100360000B042000000000030605400000000D0003
+:100370000205004400000020020500480000003291
+:1003800002050090021500200205009402150020CD
+:1003900002050098000000300205009C08100000D3
+:1003A000020500A000000036020500A40000003095
+:1003B000020500A800000031020500B000000004A2
+:1003C000020500B400000005020500C000000000A6
+:1003D000020500C400000004020500D40000000172
+:1003E00002050114000000010205011C00000001CB
+:1003F00002050120000000020205020400000001C5
+:100400000205020C0000004002050210000000403E
+:100410000205021C00000020020502200000001C52
+:100420000205022400000020060502400000000A28
+:1004300004050280002000000205005000000007B3
+:1004400002050054000000070205005800000000EB
+:100450000205005C000000080205006000000001C9
+:100460000605006400000003020500D80000000635
+:100470000205000400000001020500080000000160
+:100480000205000C00000001020500100000000140
+:100490000205001400000001020500180000000120
+:1004A0000205001C00000001020500200000000100
+:1004B00002050024000000010205002800000001E0
+:1004C0000205002C000000010205003000000001C0
+:1004D00002050034000000010205003800000001A0
+:1004E0000205003C00000001020500400000000180
+:1004F000020500E00000000D020500E80000000019
+:10050000020500F000000000020500F800000000F5
+:10051000020500E40000002D020500EC00000020B0
+:10052000020500F400000020020500FC000000208D
+:10053000020500E00000001D020500E800000010B8
+:10054000020500F000000010020500F80000001095
+:10055000020500E40000003D020500EC0000003050
+:10056000020500F400000030020500FC000000302D
+:10057000020500E00000004D020500E80000004018
+:10058000020500F000000040020500F800000040F5
+:10059000020500E40000006D020500EC00000060B0
+:1005A000020500F400000060020500FC000000608D
+:1005B000020500E00000005D020500E800000050B8
+:1005C000020500F000000050020500F80000005095
+:1005D000020500E40000007D020500EC0000007050
+:1005E000020500F400000070020500FC000000702D
+:1005F0000406100002000020020600DC00000001DA
+:100600000406020000030220020600DC00000000D5
+:100610000718040000AD0000081807D800050223E1
+:10062000071C000029920000071C8000312A0A657F
+:10063000071D000034A316B0071D80002E7A23D9B1
+:10064000071E000003502F78081E07F03F02022506
+:10065000021800BC0000003001180000000000007B
+:10066000011800040000000001180008000000004C
+:100670000118000C0000000001180010000000002C
+:100680000118001400000000021800200000000102
+:1006900002180024000000020218002800000003D5
+:1006A0000218002C000000000218003000000004B6
+:1006B0000218003400000001021800380000000099
+:1006C0000218003C00000001021800400000000475
+:1006D0000218004400000000021800480000000159
+:1006E0000218004C00000003021800500000000037
+:1006F0000218005400000001021800580000000415
+:100700000218005C000000000218006000000001F8
+:1007100002180064000000030218006800000000D6
+:100720000218006C000000010218007000000004B4
+:100730000218007400000000021800780000000495
+:100740000218007C00000003061800800000000270
+:10075000021800A400007FFF021800A8000003FF99
+:1007600002180224000000000218023400000000F9
+:100770000218024C00000000021802E4000000FF12
+:100780000618100000000400021B8BC000000001CE
+:10079000021B800000000034021B80400000001893
+:1007A000021B80800000000C021B80C000000020A3
+:1007B0000C1B8300000864700A1B830000000157B3
+:1007C0000B1B83000000055F0A1B83400000000034
+:1007D0000C1B8340000002260B1B8340000000011D
+:1007E000021B838000086470021B83C00000022685
+:1007F000021B1480000000010A1B1480000000008E
+:10080000021B944000000001061B944800000002F7
+:10081000061A1000000002B3041A1ACC00010227C5
+:10082000061A1AD000000008061A2008000000C8A6
+:10083000061A200000000002041A1BF8009002288B
+:10084000061A371800000004061A371000000002CC
+:10085000061A500000000002061A500800000004AA
+:10086000061A501800000004061A50280000000460
+:10087000061A503800000004061A50480000000410
+:10088000061A505800000004061A506800000004C0
+:10089000061A507800000002041A52C0000202B882
+:1008A000061A405000000006041A4068000202BA0E
+:1008B000041A4040000402BC041A8000000102C077
+:1008C000061A800400000003041A8010000102C10F
+:1008D000061A801400000003041A8020000102C2DE
+:1008E000061A802400000003041A8030000102C3AD
+:1008F000061A803400000003041A8040000102C47C
+:10090000061A804400000003041A8050000102C54A
+:10091000061A805400000003041A8060000102C619
+:10092000061A806400000003041A8070000102C7E8
+:10093000061A807400000003041A8080000102C8B7
+:10094000061A808400000003041A8090000102C986
+:10095000061A809400000003041A80A0000102CA55
+:10096000061A80A400000003041A80B0000102CB24
+:10097000061A80B400000003041A80C0000102CCF3
+:10098000061A80C400000003041A80D0000102CDC2
+:10099000061A80D400000003041A80E0000102CE91
+:1009A000061A80E400000003041A80F0000102CF60
+:1009B000061A80F400000003041A8100000102D02E
+:1009C000061A810400000003041A8110000102D1FC
+:1009D000061A811400000003041A8120000102D2CB
+:1009E000061A812400000003041A8130000102D39A
+:1009F000061A813400000003041A8140000102D469
+:100A0000061A814400000003041A8150000102D537
+:100A1000061A815400000003041A8160000102D606
+:100A2000061A816400000003041A8170000102D7D5
+:100A3000061A817400000003041A8180000102D8A4
+:100A4000061A818400000003041A8190000102D973
+:100A5000061A819400000003041A81A0000102DA42
+:100A6000061A81A400000003041A81B0000102DB11
+:100A7000061A81B400000003041A81C0000102DCE0
+:100A8000061A81C400000003041A81D0000102DDAF
+:100A9000061A81D400000003041A81E0000102DE7E
+:100AA000061A81E400000003041A81F0000102DF4D
+:100AB000061A81F400000003041A8200000102E01B
+:100AC000061A820400000003041A8210000102E1E9
+:100AD000061A821400000003041A8220000102E2B8
+:100AE000061A822400000003041A8230000102E387
+:100AF000061A823400000003041A8240000102E456
+:100B0000061A824400000003041A8250000102E524
+:100B1000061A825400000003041A8260000102E6F3
+:100B2000061A826400000003041A8270000102E7C2
+:100B3000061A827400000003041A8280000102E891
+:100B4000061A828400000003041A8290000102E960
+:100B5000061A829400000003041A82A0000102EA2F
+:100B6000061A82A400000003041A82B0000102EBFE
+:100B7000061A82B400000003041A82C0000102ECCD
+:100B8000061A82C400000003041A82D0000102ED9C
+:100B9000061A82D400000003041A82E0000102EE6B
+:100BA000061A82E400000003041A82F0000102EF3A
+:100BB000061A82F400000003041A8300000102F008
+:100BC000061A830400000003041A8310000102F1D6
+:100BD000061A831400000003041A8320000102F2A5
+:100BE000061A832400000003041A8330000102F374
+:100BF000061A833400000003041A8340000102F443
+:100C0000061A834400000003041A8350000102F511
+:100C1000061A835400000003041A8360000102F6E0
+:100C2000061A836400000003041A8370000102F7AF
+:100C3000061A837400000003041A8380000102F87E
+:100C4000061A838400000003041A8390000102F94D
+:100C5000061A839400000003041A83A0000102FA1C
+:100C6000061A83A400000003041A83B0000102FBEB
+:100C7000061A83B400000003041A83C0000102FCBA
+:100C8000061A83C400000003041A83D0000102FD89
+:100C9000061A83D400000003041A83E0000102FE58
+:100CA000061A83E400000003041A83F0000102FF27
+:100CB000061A83F400000003041A840000010300F4
+:100CC000061A840400000003041A841000010301C2
+:100CD000061A841400000003041A84200001030291
+:100CE000061A842400000003041A84300001030360
+:100CF000061A843400000003041A8440000103042F
+:100D0000061A844400000003041A845000010305FD
+:100D1000061A845400000003041A846000010306CC
+:100D2000061A846400000003041A8470000103079B
+:100D3000061A847400000003041A8480000103086A
+:100D4000061A848400000003041A84900001030939
+:100D5000061A849400000003041A84A00001030A08
+:100D6000061A84A400000003041A84B00001030BD7
+:100D7000061A84B400000003041A84C00001030CA6
+:100D8000061A84C400000003041A84D00001030D75
+:100D9000061A84D400000003041A84E00001030E44
+:100DA000061A84E400000003041A84F00001030F13
+:100DB000061A84F400000003041A850000010310E1
+:100DC000061A850400000003041A851000010311AF
+:100DD000061A851400000003041A8520000103127E
+:100DE000061A852400000003041A8530000103134D
+:100DF000061A853400000003041A8540000103141C
+:100E0000061A854400000003041A855000010315EA
+:100E1000061A855400000003041A856000010316B9
+:100E2000061A856400000003041A85700001031788
+:100E3000061A857400000003041A85800001031857
+:100E4000061A858400000003041A85900001031926
+:100E5000061A859400000003041A85A00001031AF5
+:100E6000061A85A400000003041A85B00001031BC4
+:100E7000061A85B400000003041A85C00001031C93
+:100E8000061A85C400000003041A85D00001031D62
+:100E9000061A85D400000003041A85E00001031E31
+:100EA000061A85E400000003041A85F00001031F00
+:100EB000061A85F400000003041A860000010320CE
+:100EC000061A860400000003041A8610000103219C
+:100ED000061A861400000003041A8620000103226B
+:100EE000061A862400000003041A8630000103233A
+:100EF000061A863400000003041A86400001032409
+:100F0000061A864400000003041A865000010325D7
+:100F1000061A865400000003041A866000010326A6
+:100F2000061A866400000003041A86700001032775
+:100F3000061A867400000003041A86800001032844
+:100F4000061A868400000003041A86900001032913
+:100F5000061A869400000003041A86A00001032AE2
+:100F6000061A86A400000003041A86B00001032BB1
+:100F7000061A86B400000003041A86C00001032C80
+:100F8000061A86C400000003041A86D00001032D4F
+:100F9000061A86D400000003041A86E00001032E1E
+:100FA000061A86E400000003041A86F00001032FED
+:100FB000061A86F400000003041A870000010330BB
+:100FC000061A870400000003041A87100001033189
+:100FD000061A871400000003041A87200001033258
+:100FE000061A872400000003041A87300001033327
+:100FF000061A873400000003041A874000010334F6
+:10100000061A874400000003041A875000010335C4
+:10101000061A875400000003041A87600001033693
+:10102000061A876400000003041A87700001033762
+:10103000061A877400000003041A87800001033831
+:10104000061A878400000003041A87900001033900
+:10105000061A879400000003041A87A00001033ACF
+:10106000061A87A400000003041A87B00001033B9E
+:10107000061A87B400000003041A87C00001033C6D
+:10108000061A87C400000003041A87D00001033D3C
+:10109000061A87D400000003041A87E00001033E0B
+:1010A000061A87E400000003041A87F00001033FDA
+:1010B000061A87F400000003041A880000010340A8
+:1010C000061A880400000003041A88100001034176
+:1010D000061A881400000003041A88200001034245
+:1010E000061A882400000003041A88300001034314
+:1010F000061A883400000003041A884000010344E3
+:10110000061A884400000003041A885000010345B1
+:10111000061A885400000003041A88600001034680
+:10112000061A886400000003041A8870000103474F
+:10113000061A887400000003041A8880000103481E
+:10114000061A888400000003041A889000010349ED
+:10115000061A889400000003041A88A00001034ABC
+:10116000061A88A400000003041A88B00001034B8B
+:10117000061A88B400000003041A88C00001034C5A
+:10118000061A88C400000003041A88D00001034D29
+:10119000061A88D400000003041A88E00001034EF8
+:1011A000061A88E400000003041A88F00001034FC7
+:1011B000061A88F400000003041A89000001035095
+:1011C000061A890400000003041A89100001035163
+:1011D000061A891400000003041A89200001035232
+:1011E000061A892400000003041A89300001035301
+:1011F000061A893400000003041A894000010354D0
+:10120000061A894400000003041A8950000103559E
+:10121000061A895400000003041A8960000103566D
+:10122000061A896400000003041A8970000103573C
+:10123000061A897400000003041A8980000103580B
+:10124000061A898400000003041A899000010359DA
+:10125000061A899400000003041A89A00001035AA9
+:10126000061A89A400000003041A89B00001035B78
+:10127000061A89B400000003041A89C00001035C47
+:10128000061A89C400000003041A89D00001035D16
+:10129000061A89D400000003041A89E00001035EE5
+:1012A000061A89E400000003041A89F00001035FB4
+:1012B000061A89F400000003041A8A000001036082
+:1012C000061A8A0400000003041A8A100001036150
+:1012D000061A8A1400000003041A8A20000103621F
+:1012E000061A8A2400000003041A8A3000010363EE
+:1012F000061A8A3400000003041A8A4000010364BD
+:10130000061A8A4400000003041A8A50000103658B
+:10131000061A8A5400000003041A8A60000103665A
+:10132000061A8A6400000003041A8A700001036729
+:10133000061A8A7400000003041A8A8000010368F8
+:10134000061A8A8400000003041A8A9000010369C7
+:10135000061A8A9400000003041A8AA00001036A96
+:10136000061A8AA400000003041A8AB00001036B65
+:10137000061A8AB400000003041A8AC00001036C34
+:10138000061A8AC400000003041A8AD00001036D03
+:10139000061A8AD400000003041A8AE00001036ED2
+:1013A000061A8AE400000003041A8AF00001036FA1
+:1013B000061A8AF400000003041A8B00000103706F
+:1013C000061A8B0400000003041A8B10000103713D
+:1013D000061A8B1400000003041A8B20000103720C
+:1013E000061A8B2400000003041A8B3000010373DB
+:1013F000061A8B3400000003041A8B4000010374AA
+:10140000061A8B4400000003041A8B500001037578
+:10141000061A8B5400000003041A8B600001037647
+:10142000061A8B6400000003041A8B700001037716
+:10143000061A8B7400000003041A8B8000010378E5
+:10144000061A8B8400000003041A8B9000010379B4
+:10145000061A8B9400000003041A8BA00001037A83
+:10146000061A8BA400000003041A8BB00001037B52
+:10147000061A8BB400000003041A8BC00001037C21
+:10148000061A8BC400000003041A8BD00001037DF0
+:10149000061A8BD400000003041A8BE00001037EBF
+:1014A000061A8BE400000003041A8BF00001037F8E
+:1014B000061A8BF400000003041A8C00000103805C
+:1014C000061A8C0400000003041A8C10000103812A
+:1014D000061A8C1400000003041A8C2000010382F9
+:1014E000061A8C2400000003041A8C3000010383C8
+:1014F000061A8C3400000003041A8C400001038497
+:10150000061A8C4400000003041A8C500001038565
+:10151000061A8C5400000003041A8C600001038634
+:10152000061A8C6400000003041A8C700001038703
+:10153000061A8C7400000003041A8C8000010388D2
+:10154000061A8C8400000003041A8C9000010389A1
+:10155000061A8C9400000003041A8CA00001038A70
+:10156000061A8CA400000003041A8CB00001038B3F
+:10157000061A8CB400000003041A8CC00001038C0E
+:10158000061A8CC400000003041A8CD00001038DDD
+:10159000061A8CD400000003041A8CE00001038EAC
+:1015A000061A8CE400000003041A8CF00001038F7B
+:1015B000061A8CF400000003041A8D000001039049
+:1015C000061A8D0400000003041A8D100001039117
+:1015D000061A8D1400000003041A8D2000010392E6
+:1015E000061A8D2400000003041A8D3000010393B5
+:1015F000061A8D3400000003041A8D400001039484
+:10160000061A8D4400000003041A8D500001039552
+:10161000061A8D5400000003041A8D600001039621
+:10162000061A8D6400000003041A8D7000010397F0
+:10163000061A8D7400000003041A8D8000010398BF
+:10164000061A8D8400000003041A8D90000103998E
+:10165000061A8D9400000003041A8DA00001039A5D
+:10166000061A8DA400000003041A8DB00001039B2C
+:10167000061A8DB400000003041A8DC00001039CFB
+:10168000061A8DC400000003041A8DD00001039DCA
+:10169000061A8DD400000003041A8DE00001039E99
+:1016A000061A8DE400000003041A8DF00001039F68
+:1016B000061A8DF400000003041A8E00000103A036
+:1016C000061A8E0400000003041A8E10000103A104
+:1016D000061A8E1400000003041A8E20000103A2D3
+:1016E000061A8E2400000003041A8E30000103A3A2
+:1016F000061A8E3400000003041A8E40000103A471
+:10170000061A8E4400000003041A8E50000103A53F
+:10171000061A8E5400000003041A8E60000103A60E
+:10172000061A8E6400000003041A8E70000103A7DD
+:10173000061A8E7400000003041A8E80000103A8AC
+:10174000061A8E8400000003041A8E90000103A97B
+:10175000061A8E9400000003041A8EA0000103AA4A
+:10176000061A8EA400000003041A8EB0000103AB19
+:10177000061A8EB400000003041A8EC0000103ACE8
+:10178000061A8EC400000003041A8ED0000103ADB7
+:10179000061A8ED400000003041A8EE0000103AE86
+:1017A000061A8EE400000003041A8EF0000103AF55
+:1017B000061A8EF400000003041A8F00000103B023
+:1017C000061A8F0400000003041A8F10000103B1F1
+:1017D000061A8F1400000003041A8F20000103B2C0
+:1017E000061A8F2400000003041A8F30000103B38F
+:1017F000061A8F3400000003041A8F40000103B45E
+:10180000061A8F4400000003041A8F50000103B52C
+:10181000061A8F5400000003041A8F60000103B6FB
+:10182000061A8F6400000003041A8F70000103B7CA
+:10183000061A8F7400000003041A8F80000103B899
+:10184000061A8F8400000003041A8F90000103B968
+:10185000061A8F9400000003041A8FA0000103BA37
+:10186000061A8FA400000003041A8FB0000103BB06
+:10187000061A8FB400000003041A8FC0000103BCD5
+:10188000061A8FC400000003041A8FD0000103BDA4
+:10189000061A8FD400000003041A8FE0000103BE73
+:1018A000061A8FE400000007041A62C0002003BF7C
+:1018B000061A1AF000000042061AAF0000000008E5
+:1018C000061AE00000000540061AD0000000007271
+:1018D000061AD24800000010061AD6B000000020F8
+:1018E000061AD47000000090061AD46800000002A6
+:1018F000061AA000000001C4061A30000000001003
+:10190000061A308000000010061A31000000001096
+:10191000061A318000000010061A33000000001281
+:10192000061A339000000070061AD4580000000216
+:10193000061AD34800000002061AD35800000020FF
+:10194000061AA710000001C4061A3040000000105B
+:10195000061A30C000000010061A314000000010C6
+:10196000061A31C000000010061A334800000012A9
+:10197000061A355000000070061AD46000000002FC
+:10198000061AD35000000002061AD3D80000002027
+:10199000021AAE2000000000061A500000000002EB
+:1019A000061A508000000012041A4000000203DFF3
+:1019B000041A63C0000203E1061A7000000000046C
+:1019C000061A320000000008021AAE2400000000CF
+:1019D000061A501000000002061A50C8000000123B
+:1019E000041A4008000203E3041A63C8000203E576
+:1019F000061A701000000004061A322000000008C9
+:101A0000021AAE2800000000061A50200000000252
+:101A1000061A511000000012041A4010000203E7D9
+:101A2000041A63D0000203E9061A702000000004C3
+:101A3000061A324000000008021AAE2C0000000016
+:101A4000061A503000000002061A51580000001219
+:101A5000041A4018000203EB041A63D8000203EDD5
+:101A6000061A703000000004061A326000000008F8
+:101A7000021AAE3000000000061A504000000002BA
+:101A8000061A51A000000012041A4020000203EFC1
+:101A9000041A63E0000203F1061A7040000000041B
+:101AA000061A328000000008021AAE34000000005E
+:101AB000061A505000000002061A51E800000012F9
+:101AC000041A4028000203F3041A63E8000203F535
+:101AD000061A705000000004061A32A00000000828
+:101AE000021AAE3800000000061A50600000000222
+:101AF000061A523000000012041A4030000203F7A8
+:101B0000041A63F0000203F9061A70600000000472
+:101B1000061A32C000000008021AAE3C00000000A5
+:101B2000061A507000000002061A527800000012D7
+:101B3000041A4038000203FB041A63F8000203FD94
+:101B4000061A707000000004061A32E00000000857
+:101B50000200A2A4000002090200A270000000001E
+:101B60000200A274000000000200A2700000000049
+:101B70000200A274000000000200A2700000000039
+:101B80000200A274000000000200A2700000000029
+:101B90000200A27400000000020100B40000000175
+:101BA000020100B800000001020100CC00000001A9
+:101BB000020100D000000001020100DC0000000171
+:101BC0000201010000000001020101040000000107
+:101BD0000201007C003000000201008400000028A7
+:101BE0000201008C0000000002010130000000042E
+:101BF0000201025C00000001020103280000000055
+:101C0000020160580000FFFF020160700000000741
+:101C10000201055400000030020100C40000000170
+:101C2000020100F800000001020100F000000001C4
+:101C3000020100800030000002010088000000283E
+:101C400002010090000000000201013400000004C5
+:101C5000020102DC000000010201032C0000000070
+:101C60000201605C0000FFFF0201607400000007D9
+:101C70000201056400000030020100C800000001FC
+:101C8000020100FC00000001020100F4000000015C
+:101C9000020C100000000028020C200800000211B5
+:101CA000020C200C00000200020C201000000204B4
+:101CB000020C201C0000FFFF020C20200000FFFF90
+:101CC000020C20240000FFFF020C20280000FFFF70
+:101CD000020C203800000000020C203C00000037FD
+:101CE000020C204000000021020C204400000020D3
+:101CF000060C20480000001D020C20BC0000000162
+:101D0000060C20C00000003F020C21BC00000001B6
+:101D1000020C21C000000001020C21C400000001DF
+:101D2000060C21C80000001C020C223807FFFFFF30
+:101D3000020C223C0000007F020C224007FFFFFF44
+:101D4000020C22440000003F010C22480000000069
+:101D5000010C224C00000000010C22500000000089
+:101D6000010C225400000000010C22580000000069
+:101D7000010C225C00000000010C22600000000049
+:101D8000010C226400000000010C22680000000029
+:101D9000010C226C00000000010C22700000000009
+:101DA000010C227400000000010C227800000000E9
+:101DB000010C227C00000000020C22D80000FFFF72
+:101DC000020C22DC0000FFFF020C22E00000FFFFFB
+:101DD000020C22E40000FFFF0C0C2000000003E8CE
+:101DE0000A0C2000000000010B0C20000000000382
+:101DF000020C400800001011020C400C0000100002
+:101E0000020C401000001004020C401400001021CD
+:101E1000020C401C0000FFFF020C40200000FFFFEE
+:101E2000020C40240000FFFF020C40280000FFFFCE
+:101E3000020C403800000046020C403C0000000C40
+:101E4000060C404000000002020C40480000001850
+:101E5000020C404C000000F0060C40500000001F37
+:101E6000020C40CC00000001060C40D00000003AFB
+:101E7000020C41B800000001060C41BC0000000348
+:101E8000020C41C800000001020C41CC000000011E
+:101E9000060C41D00000001A020C423807FFFFFF79
+:101EA000020C423C0000007F020C424007FFFFFF93
+:101EB000020C42440000003F010C424800000000B8
+:101EC000010C424C00000000010C425000000000D8
+:101ED000010C425400000000010C425800000000B8
+:101EE000010C425C00000000010C42600000000098
+:101EF000010C426400000000010C42680000000078
+:101F0000010C426C00000000010C42700000000057
+:101F1000010C427400000000010C42780000000037
+:101F2000010C427C00000000010C42800000000017
+:101F3000020C42D80000FFFF020C42DC0000FFFF51
+:101F4000020C42E00000FFFF020C42E40000FFFF31
+:101F50000C0C4000000003E80A0C400000000001E7
+:101F60000B0C400000000003060D400000000A00BA
+:101F7000020D004400000032020D008C021500200A
+:101F8000020D009002150020020D009408100000C0
+:101F9000020D009800000036020D00A000000000B5
+:101FA000020D00A400000004020D00A800000004BF
+:101FB000060D00AC00000002020D00B80000000297
+:101FC000020D00C000000001020D00C80000000268
+:101FD000020D00CC00000002020D015C00000001B7
+:101FE000020D016400000001020D01680000000202
+:101FF000020D020400000001020D020C000000208E
+:10200000020D021000000040020D0214000000400A
+:10201000020D022000000003020D0224000000183F
+:10202000060D028000000012040D0300001803FFDB
+:10203000060D03600000000C020D004C00000001C2
+:10204000020D005000000002020D005400000000CC
+:10205000020D005800000008060D005C000000049E
+:10206000020D00C400000004020D00040000000185
+:10207000020D000800000001020D000C000000012C
+:10208000020D001000000001020D0014000000010C
+:10209000020D001800000001020D001C00000001EC
+:1020A000020D002000000001020D002400000001CC
+:1020B000020D002800000001020D002C00000001AC
+:1020C000020D003000000001020D0034000000018C
+:1020D000020D003800000001020D003C000000016C
+:1020E000020D011400000009020D011C0000000A8D
+:1020F000020D012400000000020D012C0000000070
+:10210000020D013400000000020D013C0000000B34
+:10211000020D014400000000020D0118000000291A
+:10212000020D01200000002A020D012800000020FD
+:10213000020D013000000020020D013800000020D7
+:10214000020D01400000002B020D0148000000209C
+:10215000020D011400000019020D011C0000001AFC
+:10216000020D012400000010020D012C00000010DF
+:10217000020D013400000010020D013C0000001BA4
+:10218000020D014400000010020D0118000000398A
+:10219000020D01200000003A020D0128000000306D
+:1021A000020D013000000030020D01380000003047
+:1021B000020D01400000003B020D0148000000300C
+:1021C000020D011400000049020D011C0000004A2C
+:1021D000020D012400000040020D012C000000400F
+:1021E000020D013400000040020D013C0000004BD4
+:1021F000020D014400000040020D011800000069BA
+:10220000020D01200000006A020D0128000000609C
+:10221000020D013000000060020D01380000006076
+:10222000020D01400000006B020D0148000000603B
+:10223000020D011400000059020D011C0000005A9B
+:10224000020D012400000050020D012C000000507E
+:10225000020D013400000050020D013C0000005B43
+:10226000020D014400000050020D01180000007929
+:10227000020D01200000007A020D0128000000700C
+:10228000020D013000000070020D013800000070E6
+:10229000020D01400000007B020D014800000070AB
+:1022A000060E200000000800020E004C0000003264
+:1022B000020E009402150020020E00980215002064
+:1022C000020E009C00000030020E00A0081000006A
+:1022D000020E00A400000036020E00A8000000302C
+:1022E000020E00AC00000031020E00B4000000033A
+:1022F000020E00B800000000020E00C40000000042
+:10230000020E00CC00000006020E00D80000000102
+:10231000020E014400000001020E014C0000000109
+:10232000020E015000000002020E02040000000133
+:10233000020E020C00000040020E021000000040DD
+:10234000020E021C00000004020E02200000002009
+:10235000020E02240000000E020E02280000001BE4
+:10236000060E030000000012040E0280001B04177A
+:10237000060E02EC00000005020E00540000000CE6
+:10238000020E00580000000C020E005C000000006D
+:10239000020E006000000010020E00640000001039
+:1023A000060E006800000003020E00DC00000003BF
+:1023B000020E000400000001020E000800000001EF
+:1023C000020E000C00000001020E001000000001CF
+:1023D000020E001400000001020E001800000001AF
+:1023E000020E001C00000001020E0020000000018F
+:1023F000020E002400000001020E0028000000016F
+:10240000020E002C00000001020E0030000000014E
+:10241000020E003400000001020E0038000000012E
+:10242000020E003C00000001020E0040000000010E
+:10243000020E004400000001020E01100000000F17
+:10244000020E011800000000020E01200000000032
+:10245000020E012800000000020E01140000002FEF
+:10246000020E011C00000020020E012400000020CA
+:10247000020E012C00000020020E01100000001FBF
+:10248000020E011800000010020E012000000010D2
+:10249000020E012800000010020E01140000003F8F
+:1024A000020E011C00000030020E0124000000306A
+:1024B000020E012C00000030020E01100000004F3F
+:1024C000020E011800000040020E01200000004032
+:1024D000020E012800000040020E01140000006FEF
+:1024E000020E011C00000060020E012400000060CA
+:1024F000020E012C00000060020E01100000005FBF
+:10250000020E011800000050020E012000000050D1
+:10251000020E012800000050020E01140000007F8E
+:10252000020E011C00000070020E01240000007069
+:10253000020E012C000000700730040000D60000DD
+:10254000083007D80005043207340000322A0000A2
+:102550000734800031300C8B0735000038D018D894
+:10256000073580002F82270D07360000263632EE11
+:102570000836710031E00434023000BC0000003045
+:1025800001300000000000000130000400000000E5
+:1025900001300008000000000130000C00000000C5
+:1025A00001300010000000000130001400000000A5
+:1025B0000230002000000001023000240000000270
+:1025C00002300028000000030230002C0000000050
+:1025D000023000300000000402300034000000012E
+:1025E00002300038000000000230003C0000000112
+:1025F00002300040000000040230004400000000EF
+:1026000002300048000000010230004C00000003CE
+:1026100002300050000000000230005400000001B1
+:1026200002300058000000040230005C000000008E
+:10263000023000600000000102300064000000036E
+:1026400002300068000000000230006C0000000151
+:10265000023000700000000402300074000000002E
+:1026600002300078000000040230007C000000030B
+:102670000630008000000002023000A400007FFF4E
+:10268000023000A8000003FF023002240000000016
+:1026900002300234000000000230024C0000000052
+:1026A000023002E40000FFFF0630200000000800B6
+:1026B00002338BC000000001023380000000001ACA
+:1026C000023380400000004E023380800000001082
+:1026D000023380C0000000200C33830000086470C7
+:1026E0000A338300000001570B3383000000055FAD
+:1026F0000A338340000000000C33834000000226B0
+:102700000B338340000000010233838000086470B3
+:10271000023383C00000022602331480000000014F
+:102720000A3314800000000006328000000001021D
+:1027300006322008000000C8063220000000000217
+:1027400004328520008F04360632875C00000009C1
+:1027500006323EB00000000606323ED00000000205
+:1027600006323E800000000A04323EA8000204C582
+:1027700006323E00000000200632500000000940F2
+:102780000632400000000004043294C0000204C776
+:1027900006324110000000020632D0000000007036
+:1027A0000632DB00000000D40632DEA0000000028A
+:1027B0000632E00000000800063324000000011883
+:1027C0000632100000000188063250000000002090
+:1027D00006325100000000200632520000000020A6
+:1027E0000632530000000020063254000000002092
+:1027F000063255000000002006325600000000207E
+:102800000632570000000020063258000000002069
+:10281000063259000000002006325A000000002055
+:1028200006325B000000002006325C000000002041
+:1028300006325D000000002006325E00000000202D
+:1028400006325F0000000020063284F00000000223
+:1028500004328500000204C9063285080000000227
+:102860000632DE90000000020633286000000118E6
+:102870000632162000000188063250800000002039
+:1028800006325180000000200632528000000020F5
+:1028900006325380000000200632548000000020E1
+:1028A00006325580000000200632568000000020CD
+:1028B00006325780000000200632588000000020B9
+:1028C000063259800000002006325A8000000020A5
+:1028D00006325B800000002006325C800000002091
+:1028E00006325D800000002006325E80000000207D
+:1028F00006325F8000000020063284F800000002EB
+:1029000004328510000204CB063285180000000254
+:102910000632DE98000000020232845000000000FF
+:102920000632401000000002023284540000000011
+:1029300006324020000000020232845800000000ED
+:1029400006324030000000020232845C00000000C9
+:1029500006324040000000020232846000000000A5
+:102960000632405000000002023284640000000081
+:10297000063240600000000202328468000000005D
+:1029800006324070000000020232846C0000000039
+:10299000063240800000000207200400007300009F
+:1029A00008200780001004CD072400002AF1000051
+:1029B0000724800027670ABD0824D35063FC04CF96
+:1029C000022000BC000000300120000000000000D8
+:1029D00001200004000000000120000800000000A9
+:1029E0000120000C00000000012000100000000089
+:1029F000012000140000000002200020000000015F
+:102A00000220002400000002022000280000000331
+:102A10000220002C00000000022000300000000412
+:102A200002200034000000010220003800000000F5
+:102A30000220003C000000010220004000000004D1
+:102A400002200044000000000220004800000001B5
+:102A50000220004C00000003022000500000000093
+:102A60000220005400000001022000580000000471
+:102A70000220005C00000000022000600000000155
+:102A80000220006400000003022000680000000033
+:102A90000220006C00000001022000700000000411
+:102AA00002200074000000000220007800000004F2
+:102AB0000220007C000000030620008000000002CD
+:102AC000022000A400007FFF022000A8000003FFF6
+:102AD0000220022400000000022002340000000056
+:102AE0000220024C00000000022002E40000FFFF70
+:102AF000062020000000080002238BC00000000117
+:102B00000223800000000010022380400000001219
+:102B10000223808000000030022380C00000000EED
+:102B20000C238300000864700A238300000001570F
+:102B30000B2383000000055F0A2383400000000090
+:102B40000C238340000002260B2383400000000179
+:102B50000223838000086470022383C000000226E1
+:102B600002231480000000010A23148000000000EA
+:102B7000062210000000004206222008000000C8C3
+:102B800006222000000000020622B00000000330F0
+:102B90000622F400000000530422F54C000104D189
+:102BA0000622F550000000030422F55C000104D267
+:102BB0000622F560000000030422F56C000104D336
+:102BC0000622F570000000030422F57C000104D405
+:102BD0000622F580000000030422F58C000104D5D4
+:102BE0000622F590000000030422F59C000104D6A3
+:102BF0000622F5A0000000030422F5AC000104D772
+:102C00000622F5B0000000030422F5BC000104D840
+:102C10000622F5C0000000460622E2000000044043
+:102C200004221240009004D906223000000000C0A7
+:102C30000622670000000100062290000000040048
+:102C400004226B0800200569062211F0000000062E
+:102C50000422120800060589062212200000000244
+:102C600006224000000005C00622C0000000000649
+:102C70000422C0180006058F0622C0300000000A9A
+:102C80000422C058000605950622C0700000000A04
+:102C90000422C0980006059B0622C0B00000000A6E
+:102CA0000422C0D8000605A10622C0F00000000AD8
+:102CB0000422C118000605A70622C1300000000A40
+:102CC0000422C158000605AD0622C1700000000AAA
+:102CD0000422C198000605B30622C1B00000000A14
+:102CE0000422C1D8000605B90622C1F00000000A7E
+:102CF0000422C218000605BF0622C2300000000AE6
+:102D00000422C258000605C50622C2700000000A4F
+:102D10000422C298000605CB0622C2B00000000AB9
+:102D20000422C2D8000605D10622C2F00000000A23
+:102D30000422C318000605D70622C3300000000A8B
+:102D40000422C358000605DD0622C3700000000AF5
+:102D50000422C398000605E30622C3B00000000A5F
+:102D60000422C3D8000605E90622C3F00000000AC9
+:102D70000422C418000605EF0622C4300000000A31
+:102D80000422C458000605F50622C4700000000A9B
+:102D90000422C498000605FB0622C4B00000000A05
+:102DA0000422C4D8000606010622C4F00000000A6E
+:102DB0000422C518000606070622C5300000000AD6
+:102DC0000422C5580006060D0622C5700000000A40
+:102DD0000422C598000606130622C5B00000000AAA
+:102DE0000422C5D8000606190622C5F00000000A14
+:102DF0000422C6180006061F0622C6300000000A7C
+:102E00000422C658000606250622C6700000000AE5
+:102E10000422C6980006062B0622C6B00000000A4F
+:102E20000422C6D8000606310622C6F00000000AB9
+:102E30000422C718000606370622C7300000000A21
+:102E40000422C7580006063D0622C7700000000A8B
+:102E50000422C798000606430622C7B00000000AF5
+:102E60000422C7D8000606490622C7F00000000A5F
+:102E70000422C8180006064F0622C8300000000AC7
+:102E80000422C858000606550622C8700000000A31
+:102E90000422C8980006065B0622C8B00000000A9B
+:102EA0000422C8D8000606610622C8F00000000A05
+:102EB0000422C918000606670622C9300000000A6D
+:102EC0000422C9580006066D0622C9700000000AD7
+:102ED0000422C998000606730622C9B00000000A41
+:102EE0000422C9D8000606790622C9F00000000AAB
+:102EF0000422CA180006067F0622CA300000000A13
+:102F00000422CA58000606850622CA700000000A7C
+:102F10000422CA980006068B0622CAB00000000AE6
+:102F20000422CAD8000606910622CAF00000000A50
+:102F30000422CB18000606970622CB300000000AB8
+:102F40000422CB580006069D0622CB700000000A22
+:102F50000422CB98000606A30622CBB00000000A8C
+:102F60000422CBD8000606A90622CBF00000000AF6
+:102F70000422CC18000606AF0622CC300000000A5E
+:102F80000422CC58000606B50622CC700000000AC8
+:102F90000422CC98000606BB0622CCB00000000A32
+:102FA0000422CCD8000606C10622CCF00000000A9C
+:102FB0000422CD18000606C70622CD300000000A04
+:102FC0000422CD58000606CD0622CD700000000A6E
+:102FD0000422CD98000606D30622CDB00000000AD8
+:102FE0000422CDD8000606D90622CDF00000000A42
+:102FF0000422CE18000606DF0622CE300000000AAA
+:103000000422CE58000606E50622CE700000000A13
+:103010000422CE98000606EB0622CEB00000000A7D
+:103020000422CED8000606F10622CEF00000000AE7
+:103030000422CF18000606F70622CF300000000A4F
+:103040000422CF58000606FD0622CF700000000AB9
+:103050000422CF98000607030622CFB00000000A22
+:103060000422CFD8000607090622CFF00000000A8C
+:103070000422D0180006070F0622D0300000000AF4
+:103080000422D058000607150622D0700000000A5E
+:103090000422D0980006071B0622D0B00000000AC8
+:1030A0000422D0D8000607210622D0F00000000A32
+:1030B0000422D118000607270622D1300000000A9A
+:1030C0000422D1580006072D0622D1700000000A04
+:1030D0000422D198000607330622D1B00000000A6E
+:1030E0000422D1D8000607390622D1F00000000AD8
+:1030F0000422D2180006073F0622D2300000000A40
+:103100000422D258000607450622D2700000000AA9
+:103110000422D2980006074B0622D2B00000000A13
+:103120000422D2D8000607510622D2F00000000A7D
+:103130000422D318000607570622D3300000000AE5
+:103140000422D3580006075D0622D3700000000A4F
+:103150000422D398000607630622D3B00000000AB9
+:103160000422D3D8000607690622D3F00000000A23
+:103170000422D4180006076F0622D4300000000A8B
+:103180000422D458000607750622D4700000000AF5
+:103190000422D4980006077B0622D4B00000000A5F
+:1031A0000422D4D8000607810622D4F00000000AC9
+:1031B0000422D518000607870622D5300000000A31
+:1031C0000422D5580006078D0622D5700000000A9B
+:1031D0000422D598000607930622D5B00000000A05
+:1031E0000422D5D8000607990622D5F00000000A6F
+:1031F0000422D6180006079F0622D6300000000AD7
+:103200000422D658000607A50622D6700000000A40
+:103210000422D698000607AB0622D6B00000000AAA
+:103220000422D6D8000607B10622D6F00000000A14
+:103230000422D718000607B70622D7300000000A7C
+:103240000422D758000607BD0622D7700000000AE6
+:103250000422D798000607C30622D7B00000000A50
+:103260000422D7D8000607C90622D7F00000000ABA
+:103270000422D818000607CF0622D8300000000A22
+:103280000422D858000607D50622D8700000000A8C
+:103290000422D898000607DB0622D8B00000000AF6
+:1032A0000422D8D8000607E10622D8F00000000A60
+:1032B0000422D918000607E70622D9300000000AC8
+:1032C0000422D958000607ED0622D9700000000A32
+:1032D0000422D998000607F30622D9B00000000A9C
+:1032E0000422D9D8000607F90622D9F00000000A06
+:1032F0000422DA18000607FF0622DA300000000A6E
+:103300000422DA58000608050622DA700000000AD6
+:103310000422DA980006080B0622DAB00000000A40
+:103320000422DAD8000608110622DAF00000000AAA
+:103330000422DB18000608170622DB300000000A12
+:103340000422DB580006081D0622DB700000000A7C
+:103350000422DB98000608230622DBB00000000AE6
+:103360000422DBD8000608290622DBF00000000A50
+:103370000422DC180006082F0622DC300000000AB8
+:103380000422DC58000608350622DC700000000A22
+:103390000422DC980006083B0622DCB00000000A8C
+:1033A0000422DCD8000608410622DCF00000000AF6
+:1033B0000422DD18000608470622DD300000000A5E
+:1033C0000422DD580006084D0622DD700000000AC8
+:1033D0000422DD98000608530622DDB00000000A32
+:1033E0000422DDD8000608590622DDF00000000A9C
+:1033F0000422DE180006085F0622DE300000000A04
+:103400000422DE58000608650622DE700000000A6D
+:103410000422DE980006086B0622DEB00000000AD7
+:103420000422DED8000608710622DEF00000000A41
+:103430000422DF18000608770622DF300000000AA9
+:103440000422DF580006087D0622DF700000000A13
+:103450000422DF98000608830622DFB00000000A7D
+:103460000422DFD8000608890622DFF00000000AE7
+:103470000422E0180006088F0622E0300000000A4F
+:103480000422E058000608950622E0700000000AB9
+:103490000422E0980006089B0622E0B00000000A23
+:1034A0000422E0D8000608A10622E0F00000000A8D
+:1034B0000422E118000608A70622E1300000000AF5
+:1034C0000422E158000608AD0622E1700000000A5F
+:1034D0000422E198000608B30622E1B00000000AC9
+:1034E0000422E1D8000608B90622E1F00000000439
+:1034F0000622153800000002062211E80000000232
+:103500000622F3000000000802221148000000001B
+:1035100006225900000000060622330000000002C7
+:1035200006226040000000300622F3200000000860
+:103530000222114C0000000006225918000000066B
+:10354000062233080000000206226100000000305D
+:103550000622F34000000008022211500000000083
+:103560000622593000000006062233100000000237
+:10357000062261C0000000300622F360000000084F
+:1035800002221154000000000622594800000006E3
+:10359000062233180000000206226280000000307C
+:1035A0000622F380000000080222115800000000EB
+:1035B00006225960000000060622332000000002A7
+:1035C00006226340000000300622F3A0000000083D
+:1035D0000222115C0000000006225978000000065B
+:1035E000062233280000000206226400000000309A
+:1035F0000622F3C000000008022211600000000053
+:103600000622599000000006062233300000000216
+:10361000062264C0000000300622F3E0000000082B
+:103620000222116400000000062259A800000006D2
+:1036300006223338000000020622658000000030B8
+:103640000216100000000028021700080000000207
+:103650000217002C000000030217003C00000004C9
+:10366000021700440000000002170048000000029A
+:103670000217004C0000009002170050000000905C
+:103680000217005400800090021700580810000034
+:10369000021700700000000602170078000009FF02
+:1036A0000217007C0000076C021701C4081000001C
+:1036B0000217034400000001021704000000008A02
+:1036C00002170404000000800217040800000081B3
+:1036D0000217040C00000080021704100000008A8A
+:1036E0000217041400000080021704180000008173
+:1036F0000217041C00000080021704300000008A3A
+:103700000217043400000080021704380000008112
+:103710000217043C00000080021704400000008AE9
+:1037200002170444000000800217044800000081D2
+:103730000217044C00000080021704800000008A79
+:103740000217048400000080021704880000008132
+:103750000217048C0000008002170038007C10045F
+:10376000021700040000000F021701EC0000000225
+:10377000021701F400000002021701EC0000000231
+:10378000021701F400000002021701EC0000000221
+:10379000021701F400000002021701EC0000000211
+:1037A000021701F400000002021701EC0000000201
+:1037B000021701F400000002021701EC00000002F1
+:1037C000021701F400000002021701EC00000002E1
+:1037D000021701F400000002021701EC00000002D1
+:1037E000021701F400000002061640240000000247
+:1037F000021640700000001C021642080000000182
+:1038000002164210000000010216422000000001D2
+:10381000021642280000000102164230000000019A
+:103820000216423800000001021642600000000249
+:103830000C16401C0003D0900A16401C0000009C8F
+:103840000B16401C000002710216403000000028D8
+:10385000021640340000002C0216403800000030F0
+:103860000216404400000020021640000000000143
+:10387000021640D8000000010216400800000001B6
+:103880000216400C0000000102164010000000016A
+:1038900002164240000000000216424800000000EC
+:1038A000061642700000000202164250000000009E
+:1038B0000216425800000000061642800000000276
+:1038C00002166008000012140216600C00001200BC
+:1038D00002166010000012040216601C0000FFFFB8
+:1038E000021660200000FFFF021660240000FFFFA8
+:1038F000021660280000FFFF02166038000000205A
+:103900000216603C00000010061660400000000235
+:1039100002166048000000230216604C00000024DC
+:1039200002166050000000250216605400000026B8
+:1039300002166058000000270216605C00000011AB
+:103940000216606000000000021660640000002B98
+:10395000021660680000002C0216606C0000002D4A
+:1039600002166070000000EC021660740000000097
+:1039700002166078000000290216607C0000002A10
+:10398000021660800000002F061660840000000D03
+:10399000021660B800000001061660BC00000008B6
+:1039A000021660DC00000001061660E00000000462
+:1039B000021660F000000001061660F4000000032B
+:1039C0000216610000000001061661040000002DCF
+:1039D000021661B800000001061661BC0000000874
+:1039E000021661DC00000001061661E00000000420
+:1039F000021661F000000001061661F400000003E9
+:103A00000216620000000001061662040000000DAC
+:103A10000216623807FFFFFF0216623C0000007FBB
+:103A20000216624007FFFFFF021662440000003FDB
+:103A300001166248000000000116624C0000000000
+:103A400001166250000000000116625400000000E0
+:103A500001166258000000000116625C00000000C0
+:103A600001166260000000000116626400000000A0
+:103A700001166268000000000116626C0000000080
+:103A80000116627000000000011662740000000060
+:103A900001166278000000000116627C0000000040
+:103AA000011662D400000000021662D80000FFFF79
+:103AB000021662DC0000FFFF021662E00000FFFF5A
+:103AC000021662E40000FFFF0C166000000003E82D
+:103AD0000A166000000000010B16600000000003E1
+:103AE0000216804000000006021680440000000517
+:103AF000021680480000000A0216804C00000005F3
+:103B00000216805400000002021680CC000000045F
+:103B1000021680D000000004021680D400000004C9
+:103B2000021680D800000004021680DC00000004A9
+:103B3000021680E000000004021680E40000000489
+:103B4000021680E800000004021688040000000647
+:103B5000021680300000007C021680340000003D18
+:103B6000021680380000003F0216803C0000009CD6
+:103B70000216E6E8000060000216E6EC00006000B5
+:103B80000216E6F0000060000216E6F40000600095
+:103B900002168234000025E40216823800008000FC
+:103BA00002168094000025E3021681F400000C0840
+:103BB000021681F800000040021681FC000001009E
+:103BC0000216820000000020021682040000001786
+:103BD00002168208000000800216820C000002001B
+:103BE00002168210000000000216823C0000001342
+:103BF00002168220008F008F0216821C008F008F19
+:103C0000021680F0000000070216821801FF01FF73
+:103C10000216821401FF01FF061680F40000000264
+:103C20000216811C0000000502168120000000051C
+:103C300002168124000000050216812800000008F9
+:103C40000216812C000000060216813000000007D9
+:103C50000616813400000004021680FC00000000FB
+:103C600006168144000000020216814C0000000488
+:103C7000021681500000000102168154000000026B
+:103C800002168158000000050216815C0000000544
+:103C90000216816000000005021681640000000524
+:103CA0000216816800000008021681000000000072
+:103CB0000216816C000000060216817000000007E9
+:103CC00006168174000000060216818C00000004B4
+:103CD000021681900000000102168104000000001D
+:103CE000021681940000000202168198000000056F
+:103CF0000216819C00000005021681A0000000054C
+:103D0000021681A400000005021681A80000000828
+:103D1000021681AC00000006021681B00000000708
+:103D2000061681B40000000202168108000000009F
+:103D3000061681BC00000004021681CC00000004BD
+:103D4000021681D000000001021681D4000000029A
+:103D5000021681D800000005021681DC0000000573
+:103D6000021681E0000000050216810C000000042C
+:103D7000021681E400000005021681E80000000838
+:103D8000021681EC00000006021681F00000000718
+:103D900002168110000000010216811400000002CA
+:103DA00002168118000000050216809C0000004CDD
+:103DB000021680A00000004C061680C4000000021D
+:103DC000021680A400000000021680A80000000077
+:103DD000021680AC0000004C061680B00000000502
+:103DE0000216E6F80000020402168240003F003F7F
+:103DF00002168244003F003F061682900000000435
+:103E000002168248008000800216824C00800080EA
+:103E100002168250010001000216825401000100C6
+:103E20000616825800000002021682600040004020
+:103E30000216826400400040021682681E001E00C6
+:103E40000216826C1E001E000216827040004000A6
+:103E500002168274400040000216827880008000C2
+:103E60000216827C800080000216828020002000E2
+:103E700002168284200020000616828800000002BC
+:103E8000021680900000004B021680600000014086
+:103E900002168064000001400616808800000002BF
+:103EA00002168068000000000216806C000000000E
+:103EB00002168070000000C0061680740000000525
+:103EC0000216880C0101010102168810010120046C
+:103ED000021688142008100102168818010101201A
+:103EE0000216881C0101010102168820010120042C
+:103EF00002168824200810010216882801010120DA
+:103F00000216882C200810010216883001010120B9
+:103F100002168834010101010216883801012004CB
+:103F20000216883C20081001021688400101012079
+:103F3000021688440101010102168848010120048B
+:103F40000216E6BC000000000216E6C000000002F7
+:103F50000216E6C4000000040216E6C800000006CF
+:103F60000216E79400000001021680EC000000FF3A
+:103F700002140000000000010215C024000000002F
+:103F80000215C0EC000000010215C0F000000001A5
+:103F90000615C10000000002021400040000000128
+:103FA00002140008000000010214000C00000001CF
+:103FB000021400300000000102140034000000016F
+:103FC0000214004000000001021400440000FFFF42
+:103FD00006140004000000030214000000000000AA
+:103FE000060280000000200002020058000000329B
+:103FF000020200A003150020020200A40315002005
+:10400000020200A801000030020200AC081000000B
+:10401000020200B000000036020200B400000030CE
+:10402000020200B800000031020200BC00000002E1
+:10403000020200C000000005020200C400000002ED
+:10404000020200C800000002020200D000000007C7
+:10405000020200DC00000000020200E00000000597
+:10406000020200E400000003020200F00000000170
+:10407000020200FC00000006020201200000000015
+:104080000202013400000002020201B0000000013F
+:104090000202020C000000010202021400000001F2
+:1040A00002020218000000020202040400000001E3
+:1040B0000202040C00000040020204100000004054
+:1040C0000202041C00000004020204200000002080
+:1040D0000202042400000002020204280000002062
+:1040E000060205000000001204020480002008BF40
+:1040F000020200600000000F0202006400000007DE
+:1041000002020068000000000202006C0000000EC5
+:10411000020200700000000E06020074000000039E
+:10412000020200F40000000402020004000000018A
+:1041300002020008000000010202000C0000000161
+:104140000202001000000001020200140000000141
+:1041500002020018000000010202001C0000000121
+:104160000202002000000001020200240000000101
+:1041700002020028000000010202002C00000001E1
+:1041800002020030000000010202003400000001C1
+:1041900002020038000000010202003C00000001A1
+:1041A0000202004000000001020200440000000181
+:1041B00002020048000000010202004C0000000161
+:1041C000020200500000000102020108000000C8C5
+:1041D0000202011800000002020201C400000000F7
+:1041E000020201CC00000000020201D40000000223
+:1041F000020201DC00000002020201E4000000FFF4
+:10420000020201EC000000FF0202010000000000B9
+:104210000202010C000000C80202011C00000002A2
+:10422000020201C800000000020201D000000000EC
+:10423000020201D800000002020201E000000002B8
+:10424000020201E8000000FF020201F0000000FF8E
+:10425000020201040000002002020108000000C860
+:104260000202011800000002020201C40000000066
+:10427000020201CC00000000020201D40000000292
+:10428000020201DC00000002020201E4000000FF63
+:10429000020201EC000000FF020201000000001019
+:1042A0000202010C000000C80202011C0000000212
+:1042B000020201C800000000020201D0000000005C
+:1042C000020201D800000002020201E00000000228
+:1042D000020201E8000000FF020201F0000000FFFE
+:1042E000020201040000003002020108000000C8C0
+:1042F0000202011800000002020201C400000000D6
+:10430000020201CC00000000020201D40000000201
+:10431000020201DC00000002020201E4000000FFD2
+:10432000020201EC000000FF020201000000004058
+:104330000202010C000000C80202011C0000000281
+:10434000020201C800000000020201D000000000CB
+:10435000020201D800000002020201E00000000297
+:10436000020201E8000000FF020201F0000000FF6D
+:10437000020201040000006002020108000000C8FF
+:104380000202011800000002020201C40000000045
+:10439000020201CC00000000020201D40000000271
+:1043A000020201DC00000002020201E4000000FF42
+:1043B000020201EC000000FF0202010000000050B8
+:1043C0000202010C000000C80202011C00000002F1
+:1043D000020201C800000000020201D0000000003B
+:1043E000020201D800000002020201E00000000207
+:1043F000020201E8000000FF020201F0000000FFDD
+:1044000002020104000000700728040000B500004B
+:10441000082807B8000908DF072C000028E9000079
+:10442000072C800036700A3B072D000035BE17D8D8
+:10443000072D80003B1B2548072E000035D8340F80
+:10444000072E80001B224186082EBFD0280608E1D7
+:10445000022800BC0000003001280000000000001D
+:1044600001280004000000000128000800000000EE
+:104470000128000C000000000128001000000000CE
+:1044800001280014000000000228002000000001A4
+:104490000228002400000002022800280000000377
+:1044A0000228002C00000000022800300000000458
+:1044B000022800340000000102280038000000003B
+:1044C0000228003C00000001022800400000000417
+:1044D00002280044000000000228004800000001FB
+:1044E0000228004C000000030228005000000000D9
+:1044F00002280054000000010228005800000004B7
+:104500000228005C0000000002280060000000019A
+:104510000228006400000003022800680000000078
+:104520000228006C00000001022800700000000456
+:104530000228007400000000022800780000000437
+:104540000228007C00000003062800800000000212
+:10455000022800A400007FFF022800A8000003FF3B
+:10456000022802240000000002280234000000009B
+:104570000228024C00000000022802E40000FFFFB5
+:104580000628200000000800022B8BC0000000015C
+:10459000022B800000000000022B80400000001869
+:1045A000022B80800000000C022B80C000000066FF
+:1045B0000C2B8300000864700A2B83000000015755
+:1045C0000B2B83000000055F0A2B834000000000D6
+:1045D0000C2B8340000002260B2B834000000001BF
+:1045E000022B838000086470022B83C00000022627
+:1045F000022B1480000000010A2B14800000000030
+:10460000022B944000000001062B94480000000299
+:10461000062A9A7000000004042A9A80000408E325
+:10462000062A9A9000000002042A9A98000208E7DD
+:10463000062A900000000048062A2008000000C852
+:10464000062A200000000002062A912800000086A9
+:10465000062AC00000000120062A9348000000033B
+:10466000042A9354000108E9062A9FB000000002C2
+:10467000042A9418000208EA042A9CD0000108ECDD
+:10468000062A9CD400000011042A9D20008F08ED0A
+:10469000062A9F5C00000005042A30000002097C05
+:1046A000062A300800000100062A404000000010E1
+:1046B000042A40000010097E042A84080002098EA2
+:1046C000042ACF4000040990042ACF600002099414
+:1046D000062A9FA000000004062A60000000054092
+:1046E000062A9D1800000002062AB00000000050B3
+:1046F000062ABB7000000070062ABB68000000029A
+:10470000062AB94800000004062AD000000008006C
+:10471000062AC48000000150062A942000000032BE
+:10472000062A502000000002062A50300000000235
+:10473000062A500000000002062A50100000000265
+:10474000022A520800000001042A9AA000020996D9
+:10475000062A95B000000022042A96380001099824
+:10476000062A963C00000003062A96E0000000227C
+:10477000042A976800010999062A976C0000000333
+:10478000062A981000000022042A98980001099A2D
+:10479000062A989C00000003062A99400000002287
+:1047A000042A99C80001099B062A99CC000000033D
+:1047B000062ABB5800000002062AC9C000000150AA
+:1047C000062A94E800000032062A50280000000261
+:1047D000062A503800000002062A50080000000295
+:1047E000062A501800000002022A520C00000001A4
+:1047F000042A9AA80002099C062A96480000002272
+:10480000042A96D00001099E062A96D400000003CF
+:10481000062A977800000022042A98000001099FC8
+:10482000062A980400000003062A98A80000002227
+:10483000042A9930000109A0062A993400000003D7
+:10484000062A99D800000022042A9A60000109A1D2
+:10485000062A9A6400000003062ABB6000000002DA
+:10486000022ACF0000000000042A9AB0001009A21A
+:10487000062A50480000000E022ACF040000000063
+:10488000042A9AF0001009B2062A50800000000E97
+:10489000022ACF0800000000042A9B30001009C241
+:1048A000062A50B80000000E022ACF0C00000000BB
+:1048B000042A9B70001009D2062A50F00000000E56
+:1048C000022ACF1000000000042A9BB0001009E269
+:1048D000062A51280000000E022ACF140000000012
+:1048E000042A9BF0001009F2062A51600000000E15
+:1048F000022ACF1800000000042A9C3000100A028F
+:10490000062A51980000000E022ACF1C0000000069
+:10491000042A9C7000100A12062A51D00000000ED2
+:1049200002101008000000010210105000000001E9
+:10493000021010000003D000021010040000003D1F
+:104940000910180002000A220910110000100C22A0
+:1049500006101140000000080910116000100C3210
+:10496000061011A00000001806102400000000E04E
+:104970000210201C00000000021020200000000196
+:10498000021020C0000000020210200400000001FC
+:104990000210200800000001021030D800000001C1
+:1049A00009103C0000050C420910380000050C47B6
+:1049B0000910392000050C4C09103B0000050C5172
+:1049C000021040D400000030021040D80000003037
+:1049D00006104C00000001000210402800000010EA
+:1049E0000210404400003FFF021040580028000021
+:1049F000021040840084924A0210405800000000D7
+:104A0000021041380000000102104138000000018E
+:104A1000021041380000000102104138000000017E
+:104A2000021041380000000102104138000000016E
+:104A3000021041380000000102104138000000015E
+:104A40000212049001F680400212051400003C108E
+:104A500002120494FFFFFFFF02120498FFFFFFFF02
+:104A60000212049CFFFFFFFF021204A0FFFFFFFFE2
+:104A7000021204A4FFFFFFFF021204A8FFFFFFFFC2
+:104A8000021204ACFFFFFFFF021204B0FFFFFFFFA2
+:104A9000021204B8FFFFFFFF021204BCFFFFFFFF7A
+:104AA000021204C0FFFFFFFF021204C4FFFFFFFF5A
+:104AB000021204C8FFFFFFFF021204CCFFFFFFFF3A
+:104AC000021204D0FFFFFFFF021204D8FFFFFFFF16
+:104AD000021204DCFFFFFFFF021204E0FFFFFFFFF2
+:104AE000021204E4FFFFFFFF021204E8FFFFFFFFD2
+:104AF000021204ECFFFFFFFF021204F0FFFFFFFFB2
+:104B0000021204F4FFFFFFFF021204F8FFFFFFFF91
+:104B1000021204FCFFFFFFFF02120500FFFFFFFF70
+:104B200002120504FFFFFFFF02120508FFFFFFFF4F
+:104B30000212050CFFFFFFFF02120510FFFFFFFF2F
+:104B4000021204D4F800C000021204B4F0005000B5
+:104B500002120390000000080212039C00000008EB
+:104B6000021203A000000008021203A400000002C9
+:104B7000021203BC00000004021203C00000000582
+:104B8000021203C400000004021203D0000000005F
+:104B90000212036C00000001021201BC0000004080
+:104BA000021201C000001808021201C4000008032C
+:104BB000021201C800000803021201CC00000040EC
+:104BC000021201D000000003021201D40000080309
+:104BD000021201D800000803021201DC00000803E1
+:104BE000021201E000010003021201E400000803C8
+:104BF000021201E800000803021201EC00000003A9
+:104C0000021201F000000003021201F40000000390
+:104C1000021201F800000003021201FC0000000370
+:104C2000021202000000000302120204000000034E
+:104C300002120208000000030212020C000000032E
+:104C4000021202100000000302120214000000030E
+:104C500002120218000000030212021C00000003EE
+:104C600002120220000000030212022400000003CE
+:104C700002120228000024030212022C0000002F5E
+:104C80000212023000000009021202340000001972
+:104C900002120238000001840212023C000001836B
+:104CA0000212024000000306021202440000001932
+:104CB00002120248000000060212024C0000030625
+:104CC0000212025000000306021202540000030602
+:104CD0000212025800000C860212025C0000030659
+:104CE00002120260000003060212026400000006C5
+:104CF00002120268000000060212026C00000006A8
+:104D00000212027000000006021202740000000687
+:104D100002120278000000060212027C0000000667
+:104D20000212028000000006021202840000000647
+:104D300002120288000000060212028C0000000627
+:104D40000212029000000006021202940000000607
+:104D500002120298000000060212029C00000006E7
+:104D6000021202A000000306021202A400000013B7
+:104D7000021202A800000006021202B00000100495
+:104D8000021202B400001004021203240010644056
+:104D90000212032800106440021205B40000000152
+:104DA000021205F800000040021205FC0000001984
+:104DB00002120600000000010212066C0000000151
+:104DC000021201B000000001021207D80000000327
+:104DD000021207D800000003021207D800000003E7
+:104DE000021207D800000003021207D800000003D7
+:104DF000021207D800000003021207D800000003C7
+:104E0000021207D8000000030600A0000000000CFA
+:104E10000200A050000000000200A05400000000AA
+:104E20000200A0EC555400000200A0F05555555565
+:104E30000200A0F4000055550200A0F8F0000000A8
+:104E40000200A0FC555400000200A1005555555524
+:104E50000200A104000055550200A108F000000066
+:104E60000200A19C000000000200A1A000010000BF
+:104E70000200A1A4000050140200A1A8000000003C
+:104E80000200A6A8000000000200A6AC000000007E
+:104E90000200A6D0000000000200A45C00000C008C
+:104EA0000200A61C000000030200A070FFF55FFFD7
+:104EB0000200A0740000FFFF0200A078F00003E0F1
+:104EC0000200A07C000000000200A0800000A00002
+:104ED0000600A084000000050200A0980FE000007A
+:104EE0000600A09C000000070200A0B8000004001B
+:104EF0000600A0BC000000030200A0C800001000D3
+:104F00000600A0CC000000030200A0D80000400072
+:104F10000600A0DC000000030200A0E80001000081
+:104F20000600A22C000000040200A688000000FC7D
+:104F30000600A68C000000070200A6F40000000096
+:104F40000200A10CFF5C00000200A110FFF55FFF52
+:104F50000200A1140000FFFF0200A118F00003E00E
+:104F60000200A11C000000000200A1200000A0001F
+:104F70000600A124000000050200A1380FE0000097
+:104F80000600A13C000000070200A1580000080034
+:104F90000600A15C000000030200A16800002000E0
+:104FA0000600A16C000000030200A1780000800050
+:104FB0000600A17C000000030200A188000200009E
+:104FC0000600A23C000000040200A6B0000000FCA5
+:104FD0000600A6B4000000070200A6F800000000CA
+:104FE0000200A030000000000200A0340000000019
+:104FF0000200A038000000000200A03C00000000F9
+:105000000200A040000000000200A04400000000D8
+:105010000200A048000000000200A04C00000000B8
+:10502000020090C40000E000020090CC0000F300F9
+:10503000020090D400000003020091A000000001D3
+:105040000600917000000003020090EC0000600078
+:10505000020090F400007300020090FC00000003C6
+:10506000020091A8000000010600918800000003E2
+:10507000020091000000400002009108000053006F
+:105080000200911000000004020091AC0000000139
+:1050900006009194000000020200919C00000001B3
+:1050A000020090D800006000020090E00000730051
+:1050B000020090E800000003020091A4000000013B
+:1050C0000200917C000000010200918000000001BC
+:1050D00002009184000000000200912800000300FB
+:1050E0000200916C0003F0080200912C0000030004
+:1050F0000200913000000300020091340000030020
+:1051000002009138000003000200913C00000300FF
+:1051100002009140000003000200942C00000001F6
+:1051200002009430000000010200943400000001ED
+:105130000200942C000000010200943000000001E5
+:1051400002009434000000010200942C00000001D1
+:1051500002009430000000010200943400000001BD
+:105160000200942C000000010200943000000001B5
+:1051700002009434000000010200942C00000001A1
+:10518000020094300000000102009434000000018D
+:105190000200942C00000001020094300000000185
+:1051A00002009434000000010200942C0000000171
+:1051B000020094300000000102009434000000015D
+:1051C0000200942C00000001020094300000000155
+:1051D0000200943400000001021300780000003047
+:1051E0000213003C000061A8061301080000000340
+:1051F000021301040000000002130134000000004B
+:10520000061301080000000302130104000000005F
+:10521000021301340000000006130108000000031F
+:10522000021301040000000002130134000000001A
+:10523000061301080000000302130104000000002F
+:1052400002130134000000000613010800000003EF
+:1052500002130104000000000213013400000000EA
+:1052600006130108000000030213010400000000FF
+:1052700002130134000000000613010800000003BF
+:1052800002130104000000000213013400000000BA
+:1052900006130108000000030213010400000000CF
+:1052A0000213013400000000021100B800000001E8
+:1052B0000216E6E8000020000216E6EC00002000DE
+:1052C0000216E6F0000065550216E6F4000065558A
+:1052D00002168150000000000216817400000001D7
+:1052E00002168178000000010216817C0000000196
+:1052F0000216818000000001021681840000000176
+:105300000216818800000001021681B4000000012D
+:10531000021681B800000001021681BC00000001E5
+:10532000021681C000000001021681C400000001C5
+:10533000021681C800000001021681100000000062
+:105340000216824000BF00BF061682440000000221
+:105350000216824C00BF00BF0216E6C40000000126
+:105360000216E6C8000000030216E79400000000E1
+:10537000042ACF40000A0C56000000000000000084
+:1053800000000034000000000000000000000000E9
+:10539000000000000000000000000000000000000D
+:1053A0000000000000000000000000000034003594
+:1053B00000000000000000000000000000000000ED
+:1053C00000000000000000000000000000000000DD
+:1053D0000000000000000000003500600000000038
+:1053E00000000000000000000000000000000000BD
+:1053F00000000000000000000000000000000000AD
+:1054000000000000006000910000000000000000AB
+:1054100000910095009500990099009D009D00A1C4
+:1054200000A100A500A500A900A900AD00AD00B134
+:1054300000B100B500000000000000000000000006
+:10544000000000000000000000000000000000005C
+:1054500000000000000000000000000000B5031183
+:105460000311031B031B03250325032C032C033308
+:105470000333033A033A0341034103480348034F0C
+:10548000034F03560356035D0000000000000000B8
+:10549000000000000000000000000000000000000C
+:1054A00000000000000000000000000000000000FC
+:1054B00000000000000000000000000000000000EC
+:1054C00000000000000000000000000000000000DC
+:1054D00000000000000000000000000000000000CC
+:1054E00000000000000000000000000000000000BC
+:1054F00000000000000000000000000000000000AC
+:10550000000000000000000000000000000000009B
+:10551000000000000000000000000000000000008B
+:10552000000000000000000000000000000000007B
+:105530000000000000000000035D035E00000000AA
+:1055400000000000035E035F035F0360036003610C
+:10555000036103620362036303630364036403651B
+:10556000036503660000000000000000000000006A
+:10557000000000000000000000000000000000002B
+:10558000000000000000000000000000000000001B
+:105590000366036D036D0379037903850000000042
+:1055A00000000000000000000000000000000000FB
+:1055B00000000000000000000000000000000000EB
+:1055C00000000000000000000000000000000000DB
+:1055D00000000000000000000000000000000000CB
+:1055E00000000000000000000385038600000000AA
+:1055F00000000000000000000000000000000000AB
+:10560000000000000000000000000000000000009A
+:1056100000000000038603B100000000000000004D
+:10562000000000000000000000000000000000007A
+:10563000000000000000000000000000000000006A
+:1056400003B103E0000000000000000000000000C3
+:10565000000000000000000000000000000000004A
+:1056600000000000000000000000000003E0040F44
+:105670000000000000000000040F04160416041DC2
+:10568000041D04240424042B042B043204320439A2
+:1056900004390440044004470447047A0000000031
+:1056A00000000000047A047E047E048204820486E2
+:1056B0000486048A048A048E048E0492049204965A
+:1056C0000496049A049A04EA04EA05000500051603
+:1056D000051605180518051A051A051C051C051ED2
+:1056E000051E052005200522052205240524052682
+:1056F00005260693000000000000000006930698AF
+:105700000698069D069D06A206A206A706A706AC59
+:1057100006AC06B106B106B606B606BB06BB06BCAD
+:105720000000000000000000000000000000000079
+:105730000000000000000000000000000000000069
+:10574000000000000000000006BC06E000000000B1
+:105750000000000006E006E206E206E406E406E6D3
+:1057600006E606E806E806EA06EA06EC06EC06EEB9
+:1057700006EE06F006F00705070507080708070B01
+:105780000000000000000000000000000000000019
+:105790000000000000000000000000000000000009
+:1057A000070B074F00000000000000000000000091
+:1057B00000000000000000000000000000000000E9
+:1057C000000000000000000000000000074F07E19B
+:1057D00000000000000000000000000000000000C9
+:1057E00000000000000000000000000000000000B9
+:1057F000000000000000000007E107EF00000000CB
+:105800000000000000000000000000000000000098
+:105810000000000000000000000000000000000088
+:105820000000000007EF082C00000000000000004E
+:10583000082C08350835083E083E08470847085038
+:1058400008500859085908620862086B086B087408
+:10585000087408D508D508EA08EA08FF08FF090215
+:1058600009020905090509080908090B090B090EB0
+:10587000090E09110911091409140917091709203A
+:105880000000000000000000000000000000000018
+:105890000000000000000000000000000000000008
+:1058A00000000000000000000920092600000000A0
+:1058B00000000000000000000000000000000000E8
+:1058C00000000000000000000000000000000000D8
+:1058D000000000000926092B000000000000000065
+:1058E00000000000000000000000000000000000B8
+:1058F00000000000000000000000000000000000A8
+:10590000092B0933000000000000000009330934AE
+:10591000093409350935093609360937093709388F
+:10592000093809390939093A093A093B00000000E8
+:105930000000000000000000000000000000000067
+:105940000000000000000000000000000000000057
+:105950000000000000000000093B09AC000000004E
+:105960000000000009AC09AD09AD09AE09AE09AFF0
+:1059700009AF09B009B009B109B109B209B209B357
+:1059800009B309B409B409C809C809DB09DB09EF7F
+:1059900009EF09F009F009F109F109F209F209F337
+:1059A00009F309F409F409F509F509F609F609F707
+:1059B00009F70A1600000000000000000A160A1984
+:1059C0000A190A1C0A1C0A1F0A1F0A220A220A258F
+:1059D0000A250A280A280A2B0A2B0A2E0A2E0A3020
+:1059E00000000000000000000A300A330A330A36C3
+:1059F0000A360A390A390A3C0A3C0A3F0A3F0A4277
+:105A00000A420A450A450A480A480A4900000000B5
+:105A10000000000000000000000000000000000086
+:105A20000000000000000000000000000000000076
+:105A3000000000000A490A610000000000000000A8
+:105A40000000000000000000000000000000000056
+:105A50000000000000000000000000000000000046
+:105A60000A610A620000000000000000000000005F
+:105A70000000000000000000000000000000000026
+:105A80000000000000000000000000000000000016
+:105A9000000100000002070000030E0000041500D2
+:105AA00000051C000006230000072A000008310042
+:105AB00000093800000A3F00000B4600000C4D00B2
+:105AC000000D5400000E5B00000F62000010690022
+:105AD000001170000012770000137E000014850092
+:105AE00000158C000016930000179A000018A10002
+:105AF0000019A800001AAF00001BB600001CBD0072
+:105B0000001DC400001ECB00001FD2000000D90001
+:105B10000000200000004000000060000000800045
+:105B20000000A0000000C0000000E0000001000034
+:105B30000001200000014000000160000001800021
+:105B40000001A0000001C0000001E0000002000010
+:105B500000022000000240000002600000028000FD
+:105B60000002A0000002C0000002E00000030000EC
+:105B700000032000000340000003600000038000D9
+:105B80000003A0000003C0000003E00000040000C8
+:105B900000042000000440000004600000048000B5
+:105BA0000004A0000004C0000004E00000050000A4
+:105BB0000005200000054000000560000005800091
+:105BC0000005A0000005C0000005E0000006000080
+:105BD000000620000006400000066000000680006D
+:105BE0000006A0000006C0000006E000000700005C
+:105BF0000007200000074000000760000007800049
+:105C00000007A0000007C0000007E0000008000037
+:105C10000008200000084000000860000008800024
+:105C20000008A0000008C0000008E0000009000013
+:105C30000009200000094000000960000009800000
+:105C40000009A0000009C0000009E000000A0000EF
+:105C5000000A2000000A4000000A6000000A8000DC
+:105C6000000AA000000AC000000AE000000B0000CB
+:105C7000000B2000000B4000000B6000000B8000B8
+:105C8000000BA000000BC000000BE000000C0000A7
+:105C9000000C2000000C4000000C6000000C800094
+:105CA000000CA000000CC000000CE000000D000083
+:105CB000000D2000000D4000000D6000000D800070
+:105CC000000DA000000DC000000DE000000E00005F
+:105CD000000E2000000E4000000E6000000E80004C
+:105CE000000EA000000EC000000EE000000F00003B
+:105CF000000F2000000F4000000F6000000F800028
+:105D0000000FA000000FC000000FE0000010000016
+:105D10000010200000104000001060000010800003
+:105D20000010A0000010C0000010E00000110000F2
+:105D300000112000001140000011600000118000DF
+:105D40000011A0000011C0000011E00000120000CE
+:105D500000122000001240000012600000128000BB
+:105D60000012A0000012C0000012E00000130000AA
+:105D70000013200000134000001360000013800097
+:105D80000013A0000013C0000013E0000014000086
+:105D90000014200000144000001460000014800073
+:105DA0000014A0000014C0000014E0000015000062
+:105DB000001520000015400000156000001580004F
+:105DC0000015A0000015C0000015E000001600003E
+:105DD000001620000016400000166000001680002B
+:105DE0000016A0000016C0000016E000001700001A
+:105DF0000017200000174000001760000017800007
+:105E00000017A0000017C0000017E00000180000F5
+:105E100000182000001840000018600000188000E2
+:105E20000018A0000018C0000018E00000190000D1
+:105E300000192000001940000019600000198000BE
+:105E40000019A0000019C0000019E000001A0000AD
+:105E5000001A2000001A4000001A6000001A80009A
+:105E6000001AA000001AC000001AE000001B000089
+:105E7000001B2000001B4000001B6000001B800076
+:105E8000001BA000001BC000001BE000001C000065
+:105E9000001C2000001C4000001C6000001C800052
+:105EA000001CA000001CC000001CE000001D000041
+:105EB000001D2000001D4000001D6000001D80002E
+:105EC000001DA000001DC000001DE000001E00001D
+:105ED000001E2000001E4000001E6000001E80000A
+:105EE000001EA000001EC000001EE000001F0000F9
+:105EF000001F2000001F4000001F6000001F8000E6
+:105F0000001FA000001FC000001FE00000200000D4
+:105F100000202000002040000020600000208000C1
+:105F20000020A0000020C0000020E00000210000B0
+:105F3000002120000021400000216000002180009D
+:105F40000021A0000021C0000021E000002200008C
+:105F50000022200000224000002260000022800079
+:105F60000022A0000022C0000022E0000023000068
+:105F70000023200000234000002360000023800055
+:105F80000023A0000023C0000023E0000024000044
+:105F90000024200000244000002460000024800031
+:105FA0000024A0000024C0000024E0000025000020
+:105FB000002520000025400000256000002580000D
+:105FC0000025A0000025C0000025E00000260000FC
+:105FD00000262000002640000026600000268000E9
+:105FE0000026A0000026C0000026E00000270000D8
+:105FF00000272000002740000027600000278000C5
+:106000000027A0000027C0000027E00000280000B3
+:1060100000282000002840000028600000288000A0
+:106020000028A0000028C0000028E000002900008F
+:10603000002920000029400000296000002980007C
+:106040000029A0000029C0000029E000002A00006B
+:10605000002A2000002A4000002A6000002A800058
+:10606000002AA000002AC000002AE000002B000047
+:10607000002B2000002B4000002B6000002B800034
+:10608000002BA000002BC000002BE000002C000023
+:10609000002C2000002C4000002C6000002C800010
+:1060A000002CA000002CC000002CE000002D0000FF
+:1060B000002D2000002D4000002D6000002D8000EC
+:1060C000002DA000002DC000002DE000002E0000DB
+:1060D000002E2000002E4000002E6000002E8000C8
+:1060E000002EA000002EC000002EE000002F0000B7
+:1060F000002F2000002F4000002F6000002F8000A4
+:10610000002FA000002FC000002FE0000030000092
+:10611000003020000030400000306000003080007F
+:106120000030A0000030C0000030E000003100006E
+:10613000003120000031400000316000003180005B
+:106140000031A0000031C0000031E000003200004A
+:106150000032200000324000003260000032800037
+:106160000032A0000032C0000032E0000033000026
+:106170000033200000334000003360000033800013
+:106180000033A0000033C0000033E0000034000002
+:1061900000342000003440000034600000348000EF
+:1061A0000034A0000034C0000034E00000350000DE
+:1061B00000352000003540000035600000358000CB
+:1061C0000035A0000035C0000035E00000360000BA
+:1061D00000362000003640000036600000368000A7
+:1061E0000036A0000036C0000036E0000037000096
+:1061F0000037200000374000003760000037800083
+:106200000037A0000037C0000037E0000038000071
+:10621000003820000038400000386000003880005E
+:106220000038A0000038C0000038E000003900004D
+:10623000003920000039400000396000003980003A
+:106240000039A0000039C0000039E000003A000029
+:10625000003A2000003A4000003A6000003A800016
+:10626000003AA000003AC000003AE000003B000005
+:10627000003B2000003B4000003B6000003B8000F2
+:10628000003BA000003BC000003BE000003C0000E1
+:10629000003C2000003C4000003C6000003C8000CE
+:1062A000003CA000003CC000003CE000003D0000BD
+:1062B000003D2000003D4000003D6000003D8000AA
+:1062C000003DA000003DC000003DE000003E000099
+:1062D000003E2000003E4000003E6000003E800086
+:1062E000003EA000003EC000003EE000003F000075
+:1062F000003F2000003F4000003F6000003F800062
+:10630000003FA000003FC000003FE000003FE00170
+:1063100000000000000001FF0000020000007FF804
+:1063200000007FF800000A90000035000000000126
+:106330000000FF00000000000000FF00000000005F
+:106340000000FF00000000000000FF00000000004F
+:106350000000FF00000000000000FF00000000003F
+:106360000000FF00000000000000FF00000000002F
+:106370000000FF00000000000000FF00000000001F
+:106380000000FF00000000000000FF00000000000F
+:106390000000FF00000000000000FF0000000000FF
+:1063A0000000FF00000000000000FF0000000000EF
+:1063B0000000FF00000000000000FF0000000000DF
+:1063C0000000FF00000000000000FF0000000000CF
+:1063D0000000FF00000000000000FF0000000000BF
+:1063E0000000FF00000000000000FF0000000000AF
+:1063F0000000FF00000000000000FF00000000009F
+:106400000000FF00000000000000FF00000000008E
+:106410000000FF00000000000000FF00000000007E
+:106420000000FF00000000000000FF00000000006E
+:106430000000FF00000000000000FF00000000005E
+:106440000000FF00000000000000FF00000000004E
+:106450000000FF00000000000000FF00000000003E
+:106460000000FF00000000000000FF00000000002E
+:106470000000FF00000000000000FF00000000001E
+:106480000000FF00000000000000FF00000000000E
+:106490000000FF00000000000000FF0000000000FE
+:1064A0000000FF00000000000000FF0000000000EE
+:1064B0000000FF00000000000000FF0000000000DE
+:1064C0000000FF00000000000000FF0000000000CE
+:1064D0000000FF00000000000000FF0000000000BE
+:1064E0000000FF00000000000000FF0000000000AE
+:1064F0000000FF00000000000000FF00000000009E
+:106500000000FF00000000000000FF00000000008D
+:106510000000FF00000000000000FF00000000007D
+:106520000000FF00000000000000FF00000000006D
+:106530000000FF00000000000000FF00000000005D
+:106540000000FF00000000000000FF00000000004D
+:106550000000FF00000000000000FF00000000003D
+:106560000000FF00000000000000FF00000000002D
+:1065700000000000140AFF000000000100000000FD
+:106580000020100100000000010090000000010048
+:1065900000009002000090040000900600009008A7
+:1065A0000000900A0000900C0000900E0000901077
+:1065B0000000901200009014000090160000901847
+:1065C0000000901A0000901C0000901E0000902017
+:1065D00000009022000090240000902600009028E7
+:1065E0000000902A0000902C0000902E00009030B7
+:1065F0000000903200009034000090360000903887
+:106600000000903A0000903C0000903E0000904056
+:106610000000904200009044000090460000904826
+:106620000000904A0000904C0000904E00009050F6
+:1066300000009052000090540000905600009058C6
+:106640000000905A0000905C0000905E0000906096
+:106650000000906200009064000090660000906866
+:106660000000906A0000906C0000906E0000907036
+:106670000000907200009074000090760000907806
+:106680000000907A0000907C0000907E00009080D6
+:1066900000009082000090840000908600009088A6
+:1066A0000000908A0000908C0000908E0000909076
+:1066B0000000909200009094000090960000909846
+:1066C0000000909A0000909C0000909E000090A016
+:1066D000000090A2000090A4000090A6000090A8E6
+:1066E000000090AA000090AC000090AE000090B0B6
+:1066F000000090B2000090B4000090B6000090B886
+:10670000000090BA000090BC000090BE000090C055
+:10671000000090C2000090C4000090C6000090C825
+:10672000000090CA000090CC000090CE000090D0F5
+:10673000000090D2000090D4000090D6000090D8C5
+:10674000000090DA000090DC000090DE000090E095
+:10675000000090E2000090E4000090E6000090E865
+:10676000000090EA000090EC000090EE000090F035
+:10677000000090F2000090F4000090F6000090F805
+:10678000000090FA000090FC000090FE00009100D4
+:1067900000009102000091040000910600009108A1
+:1067A0000000910A0000910C0000910E0000911071
+:1067B0000000911200009114000091160000911841
+:1067C0000000911A0000911C0000911E0000912011
+:1067D00000009122000091240000912600009128E1
+:1067E0000000912A0000912C0000912E00009130B1
+:1067F0000000913200009134000091360000913881
+:106800000000913A0000913C0000913E0000914050
+:106810000000914200009144000091460000914820
+:106820000000914A0000914C0000914E00009150F0
+:1068300000009152000091540000915600009158C0
+:106840000000915A0000915C0000915E0000916090
+:106850000000916200009164000091660000916860
+:106860000000916A0000916C0000916E0000917030
+:106870000000917200009174000091760000917800
+:106880000000917A0000917C0000917E00009180D0
+:1068900000009182000091840000918600009188A0
+:1068A0000000918A0000918C0000918E0000919070
+:1068B0000000919200009194000091960000919840
+:1068C0000000919A0000919C0000919E000091A010
+:1068D000000091A2000091A4000091A6000091A8E0
+:1068E000000091AA000091AC000091AE000091B0B0
+:1068F000000091B2000091B4000091B6000091B880
+:10690000000091BA000091BC000091BE000091C04F
+:10691000000091C2000091C4000091C6000091C81F
+:10692000000091CA000091CC000091CE000091D0EF
+:10693000000091D2000091D4000091D6000091D8BF
+:10694000000091DA000091DC000091DE000091E08F
+:10695000000091E2000091E4000091E6000091E85F
+:10696000000091EA000091EC000091EE000091F02F
+:10697000000091F2000091F4000091F6000091F8FF
+:10698000000091FA000091FC000091FEFFFFFFFF64
+:10699000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF07
+:1069A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF7
+:1069B000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE7
+:1069C000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD7
+:1069D000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC7
+:1069E000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFB7
+:1069F000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFA7
+:106A0000FFFFFFFFFFFFFFFFFFFFFFFF000000038F
+:106A100000BEBC20000000000000000500000003D4
+:106A200000BEBC20000000000000000500000003C4
+:106A300000BEBC20000000000000000500000003B4
+:106A400000BEBC20000000000000000500000003A4
+:106A500000BEBC2000000000000000050000000394
+:106A600000BEBC2000000000000000050000000384
+:106A700000BEBC2000000000000000050000000374
+:106A800000BEBC2000000000000000050000200047
+:106A9000000040C000006180000082400000A300B0
+:106AA0000000C3C00000E480000105400001260092
+:106AB000000146C000016780000188400001A90074
+:106AC0000001C9C00001EA8000020B4000022C0056
+:106AD00000024CC000026D8000028E400002AF0038
+:106AE0000002CFC00002F0800000114000008000D2
+:106AF000000103800001870000020A8000028E006E
+:106B000000031180000395000004188000049C001D
+:106B100000051F800005A300000626800006AA00CD
+:106B200000072D800007B100000834800008B8007D
+:106B300000093B800009BF00000A4280000AC6002D
+:106B4000000B4980000BCD00000C5080000CD400DD
+:106B5000000D578000005B0000007FF800007FF808
+:106B60000000022A000035000000FF0000000000C5
+:106B70000000FF00000000000000FF000000000017
+:106B80000000FF00000000000000FF000000000007
+:106B90000000FF00000000000000FF0000000000F7
+:106BA0000000FF00000000000000FF0000000000E7
+:106BB0000000FF00000000000000FF0000000000D7
+:106BC0000000FF00000000000000FF0000000000C7
+:106BD0000000FF00000000000000FF0000000000B7
+:106BE0000000FF00000000000000FF0000000000A7
+:106BF0000000FF00000000000000FF000000000097
+:106C00000000FF00000000000000FF000000000086
+:106C10000000FF00000000000000FF000000000076
+:106C20000000FF00000000000000FF000000000066
+:106C30000000FF00000000000000FF000000000056
+:106C40000000FF00000000000000FF000000000046
+:106C50000000FF00000000000000FF000000000036
+:106C60000000FF00000000000000FF000000000026
+:106C70000000FF00000000000000FF000000000016
+:106C80000000FF00000000000000FF000000000006
+:106C90000000FF00000000000000FF0000000000F6
+:106CA0000000FF00000000000000FF0000000000E6
+:106CB0000000FF00000000000000FF0000000000D6
+:106CC0000000FF00000000000000FF0000000000C6
+:106CD0000000FF00000000000000FF0000000000B6
+:106CE0000000FF00000000000000FF0000000000A6
+:106CF0000000FF00000000000000FF000000000096
+:106D00000000FF00000000000000FF000000000085
+:106D10000000FF00000000000000FF000000000075
+:106D20000000FF00000000000000FF000000000065
+:106D30000000FF00000000000000FF000000000055
+:106D40000000FF00000000000000FF000000000045
+:106D50000000FF00000000000000FF000000000035
+:106D60000000FF00000000000000FF000000000025
+:106D70000000FF00000000000000FF000000000015
+:106D80000000FF00000000000000FF000000000005
+:106D90000000FF00000000000000FF0000000000F5
+:106DA0000000FF00000019000000000000000000CB
+:106DB000FFFFFFFF000000000393870000000000BA
+:106DC0000393870000007FF800007FF800000BA30A
+:106DD00000001500000000FF000000FF000000FFA1
+:106DE000000000FF000000FF000000FF000000FFA7
+:106DF000000000FF0000FF00000000000000FF0096
+:106E0000000000000000FF00000000000000FF0084
+:106E1000000000000000FF00000000000000FF0074
+:106E2000000000000000FF00000000000000FF0064
+:106E3000000000000000FF00000000000000FF0054
+:106E4000000000000000FF00000000000000FF0044
+:106E5000000000000000FF00000000000000FF0034
+:106E6000000000000000FF00000000000000FF0024
+:106E7000000000000000FF00000000000000FF0014
+:106E8000000000000000FF00000000000000FF0004
+:106E9000000000000000FF00000000000000FF00F4
+:106EA000000000000000FF00000000000000FF00E4
+:106EB000000000000000FF00000000000000FF00D4
+:106EC000000000000000FF00000000000000FF00C4
+:106ED000000000000000FF00000000000000FF00B4
+:106EE000000000000000FF00000000000000FF00A4
+:106EF000000000000000FF00000000000000FF0094
+:106F0000000000000000FF00000000000000FF0083
+:106F1000000000000000FF00000000000000FF0073
+:106F2000000000000000FF00000000000000FF0063
+:106F3000000000000000FF00000000000000FF0053
+:106F4000000000000000FF00000000000000FF0043
+:106F5000000000000000FF00000000000000FF0033
+:106F6000000000000000FF00000000000000FF0023
+:106F7000000000000000FF00000000000000FF0013
+:106F8000000000000000FF00000000000000FF0003
+:106F9000000000000000FF00000000000000FF00F3
+:106FA000000000000000FF00000000000000FF00E3
+:106FB000000000000000FF00000000000000FF00D3
+:106FC000000000000000FF00000000000000FF00C3
+:106FD000000000000000FF00000000000000FF00B3
+:106FE000000000000000FF00000000000000FF00A3
+:106FF000000000000000FF00000000000000FF0093
+:10700000000000000000FF00000000000000FF0082
+:10701000000000000000FF00000000000000FF0072
+:10702000000000000000FF00000000000000FF0062
+:1070300000000000FFFFFFFFFFFFFFFFFFFFFFFF5C
+:10704000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF50
+:10705000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF40
+:10706000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF30
+:10707000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF20
+:10708000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF10
+:10709000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF00
+:1070A000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0
+:1070B000FFFFFFFF00000000000028AD00002918BE
+:1070C0000000291900000005000000070000FF0073
+:1070D0000FFFFFFF0000FF000FFFFFFF000000FF9A
+:1070E0000000FF000000FF000FFFFFFF0000FF0097
+:1070F0000FFFFFFF000000FF0000FF000000FF0087
+:107100000FFFFFFF0000FF000FFFFFFF000000FF69
+:107110000000FF000000FF000FFFFFFF0000FF0066
+:107120000FFFFFFF000000FF0000FF000000FF0056
+:107130000FFFFFFF0000FF000FFFFFFF000000FF39
+:107140000000FF000000FF000FFFFFFF0000FF0036
+:107150000FFFFFFF000000FF0000FF000000FF0026
+:107160000FFFFFFF0000FF000FFFFFFF000000FF09
+:107170000000FF000000FF000FFFFFFF0000FF0006
+:107180000FFFFFFF000000FF0000FF000000FF00F6
+:107190000FFFFFFF0000FF000FFFFFFF000000FFD9
+:1071A0000000FF000000FF000FFFFFFF0000FF00D6
+:1071B0000FFFFFFF000000FF0000FF000000FF00C6
+:1071C0000FFFFFFF0000FF000FFFFFFF000000FFA9
+:1071D0000000FF000000FF000FFFFFFF0000FF00A6
+:1071E0000FFFFFFF000000FF0000FF000000FF0096
+:1071F0000FFFFFFF0000FF000FFFFFFF000000FF79
+:107200000000FF000000FF000FFFFFFF0000FF0075
+:107210000FFFFFFF000000FF0000FF000000FF0065
+:107220000FFFFFFF0000FF000FFFFFFF000000FF48
+:107230000000FF000000FF000FFFFFFF0000FF0045
+:107240000FFFFFFF000000FF0000FF000000FF0035
+:107250000FFFFFFF0000FF000FFFFFFF000000FF18
+:107260000000FF000000FF000FFFFFFF0000FF0015
+:107270000FFFFFFF000000FF0000FF000000FF0005
+:107280000FFFFFFF0000FF000FFFFFFF000000FFE8
+:107290000000FF000000FF000FFFFFFF0000FF00E5
+:1072A0000FFFFFFF000000FF0000FF000000FF00D5
+:1072B0000FFFFFFF0000FF000FFFFFFF000000FFB8
+:1072C0000000FF000000FF000FFFFFFF0000FF00B5
+:1072D0000FFFFFFF000000FF0000FF000000FF00A5
+:1072E0000FFFFFFF0000FF000FFFFFFF000000FF88
+:1072F0000000FF000000FF000FFFFFFF0000FF0085
+:107300000FFFFFFF000000FF0000FF000000FF0074
+:107310000FFFFFFF0000FF000FFFFFFF000000FF57
+:107320000000FF000000FF000FFFFFFF0000FF0054
+:107330000FFFFFFF000000FF0000FF000000FF0044
+:107340000FFFFFFF0000FF000FFFFFFF000000FF27
+:107350000000FF000000FF000FFFFFFF0000FF0024
+:107360000FFFFFFF000000FF0000FF000000FF0014
+:107370000FFFFFFF0000FF000FFFFFFF000000FFF7
+:107380000000FF000000FF000FFFFFFF0000FF00F4
+:107390000FFFFFFF000000FF0000FF000000FF00E4
+:1073A0000FFFFFFF0000FF000FFFFFFF000000FFC7
+:1073B0000000FF000000FF000FFFFFFF0000FF00C4
+:1073C0000FFFFFFF000000FF0000FF000000FF00B4
+:1073D0000FFFFFFF0000FF000FFFFFFF000000FF97
+:1073E0000000FF000000FF000FFFFFFF0000FF0094
+:1073F0000FFFFFFF000000FF0000FF000000FF0084
+:107400000FFFFFFF0000FF000FFFFFFF000000FF66
+:107410000000FF000000FF000FFFFFFF0000FF0063
+:107420000FFFFFFF000000FF0000FF000000FF0053
+:107430000FFFFFFF0000FF000FFFFFFF000000FF36
+:107440000000FF000000FF000FFFFFFF0000FF0033
+:107450000FFFFFFF000000FF0000FF000000FF0023
+:107460000FFFFFFF0000FF000FFFFFFF000000FF06
+:107470000000FF000000FF000FFFFFFF0000FF0003
+:107480000FFFFFFF000000FF0000FF000000FF00F3
+:107490000FFFFFFF0000FF000FFFFFFF000000FFD6
+:1074A0000000FF000000FF000FFFFFFF0000FF00D3
+:1074B0000FFFFFFF000000FF0000FF000000FF00C3
+:1074C0000FFFFFFF0000FF000FFFFFFF000000FFA6
+:1074D0000000FF000000FF000FFFFFFF0000FF00A3
+:1074E0000FFFFFFF000000FF0000FF000000FF0093
+:1074F0000FFFFFFF0000FF000FFFFFFF000000FF76
+:107500000000FF000000FF000FFFFFFF0000FF0072
+:107510000FFFFFFF000000FF0000FF000000FF0062
+:107520000FFFFFFF0000FF000FFFFFFF000000FF45
+:107530000000FF000000FF000FFFFFFF0000FF0042
+:107540000FFFFFFF000000FF0000FF000000FF0032
+:107550000FFFFFFF0000FF000FFFFFFF000000FF15
+:107560000000FF000000FF000FFFFFFF0000FF0012
+:107570000FFFFFFF000000FF0000FF000000FF0002
+:107580000FFFFFFF0000FF000FFFFFFF000000FFE5
+:107590000000FF000000FF000FFFFFFF0000FF00E2
+:1075A0000FFFFFFF000000FF0000FF000000FF00D2
+:1075B0000FFFFFFF0000FF000FFFFFFF000000FFB5
+:1075C0000000FF000000FF000FFFFFFF0000FF00B2
+:1075D0000FFFFFFF000000FF0000FF000000FF00A2
+:1075E0000FFFFFFF0000FF000FFFFFFF000000FF85
+:1075F0000000FF000000FF000FFFFFFF0000FF0082
+:107600000FFFFFFF000000FF0000FF000000FF0071
+:107610000FFFFFFF0000FF000FFFFFFF000000FF54
+:107620000000FF000000FF000FFFFFFF0000FF0051
+:107630000FFFFFFF000000FF0000FF000000FF0041
+:107640000FFFFFFF0000FF000FFFFFFF000000FF24
+:107650000000FF000000FF000FFFFFFF0000FF0021
+:107660000FFFFFFF000000FF0000FF000000FF0011
+:107670000FFFFFFF0000FF000FFFFFFF000000FFF4
+:107680000000FF000000FF000FFFFFFF0000FF00F1
+:107690000FFFFFFF000000FF0000FF000000FF00E1
+:1076A0000FFFFFFF0000FF000FFFFFFF000000FFC4
+:1076B0000000FF000000FF000FFFFFFF0000FF00C1
+:1076C0000FFFFFFF000000FF0000FF000000FF00B1
+:1076D0000FFFFFFF0000FF000FFFFFFF000000FF94
+:1076E0000000FF000000FF000FFFFFFF0000FF0091
+:1076F0000FFFFFFF000000FF0000FF000000FF0081
+:107700000FFFFFFF0000FF000FFFFFFF000000FF63
+:107710000000FF000000FF000FFFFFFF0000FF0060
+:107720000FFFFFFF000000FF0000FF000000FF0050
+:107730000FFFFFFF0000FF000FFFFFFF000000FF33
+:107740000000FF000000FF000FFFFFFF0000FF0030
+:107750000FFFFFFF000000FF0000FF000000FF0020
+:107760000FFFFFFF0000FF000FFFFFFF000000FF03
+:107770000000FF000000FF000FFFFFFF0000FF0000
+:107780000FFFFFFF000000FF0000FF000000FF00F0
+:107790000FFFFFFF0000FF000FFFFFFF000000FFD3
+:1077A0000000FF000000FF000FFFFFFF0000FF00D0
+:1077B0000FFFFFFF000000FF0000FF000000FF00C0
+:1077C0000FFFFFFF0000FF000FFFFFFF000000FFA3
+:1077D0000000FF000000FF000FFFFFFF0000FF00A0
+:1077E0000FFFFFFF000000FF0000FF000000FF0090
+:1077F0000FFFFFFF0000FF000FFFFFFF000000FF73
+:107800000000FF000000FF000FFFFFFF0000FF006F
+:107810000FFFFFFF000000FF0000FF000000FF005F
+:107820000FFFFFFF0000FF000FFFFFFF000000FF42
+:107830000000FF000000FF000FFFFFFF0000FF003F
+:107840000FFFFFFF000000FF0000FF000000FF002F
+:107850000FFFFFFF0000FF000FFFFFFF000000FF12
+:107860000000FF000000FF000FFFFFFF0000FF000F
+:107870000FFFFFFF000000FF0000FF000000FF00FF
+:107880000FFFFFFF0000FF000FFFFFFF000000FFE2
+:107890000000FF000000FF000FFFFFFF0000FF00DF
+:1078A0000FFFFFFF000000FF0000FF000000FF00CF
+:1078B0000FFFFFFF0000FF000FFFFFFF000000FFB2
+:1078C0000000FF000000FF000FFFFFFF0000FF00AF
+:1078D0000FFFFFFF000000FF0000FF000000FF009F
+:1078E0000FFFFFFF0000FF000FFFFFFF000000FF82
+:1078F0000000FF000000FF000FFFFFFF0000FF007F
+:107900000FFFFFFF000000FF0000FF000000FF006E
+:107910000FFFFFFF0000FF000FFFFFFF000000FF51
+:107920000000FF000000FF000FFFFFFF0000FF004E
+:107930000FFFFFFF000000FF0000FF000000FF003E
+:107940000FFFFFFF0000FF000FFFFFFF000000FF21
+:107950000000FF000000FF000FFFFFFF0000FF001E
+:107960000FFFFFFF000000FF0000FF000000FF000E
+:107970000FFFFFFF0000FF000FFFFFFF000000FFF1
+:107980000000FF000000FF000FFFFFFF0000FF00EE
+:107990000FFFFFFF000000FF0000FF000000FF00DE
+:1079A0000FFFFFFF0000FF000FFFFFFF000000FFC1
+:1079B0000000FF000000FF000FFFFFFF0000FF00BE
+:1079C0000FFFFFFF000000FF0000FF000000FF00AE
+:1079D0000FFFFFFF0000FF000FFFFFFF000000FF91
+:1079E0000000FF000000FF000FFFFFFF0000FF008E
+:1079F0000FFFFFFF000000FF0000FF000000FF007E
+:107A00000FFFFFFF0000FF000FFFFFFF000000FF60
+:107A10000000FF000000FF000FFFFFFF0000FF005D
+:107A20000FFFFFFF000000FF0000FF000000FF004D
+:107A30000FFFFFFF0000FF000FFFFFFF000000FF30
+:107A40000000FF000000FF000FFFFFFF0000FF002D
+:107A50000FFFFFFF000000FF0000FF000000FF001D
+:107A60000FFFFFFF0000FF000FFFFFFF000000FF00
+:107A70000000FF000000FF000FFFFFFF0000FF00FD
+:107A80000FFFFFFF000000FF0000FF000000FF00ED
+:107A90000FFFFFFF0000FF000FFFFFFF000000FFD0
+:107AA0000000FF000000FF000FFFFFFF0000FF00CD
+:107AB0000FFFFFFF000000FF0000FF000000FF00BD
+:107AC0000FFFFFFF0000FF000FFFFFFF000000FFA0
+:107AD0000000FF000000FF000FFFFFFF0000FF009D
+:107AE0000FFFFFFF000000FF0000FF000000FF008D
+:107AF0000FFFFFFF0000FF000FFFFFFF000000FF70
+:107B00000000FF000000FF000FFFFFFF0000FF006C
+:107B10000FFFFFFF000000FF0000FF000000FF005C
+:107B20000FFFFFFF0000FF000FFFFFFF000000FF3F
+:107B30000000FF000000FF000FFFFFFF0000FF003C
+:107B40000FFFFFFF000000FF0000FF000000FF002C
+:107B50000FFFFFFF0000FF000FFFFFFF000000FF0F
+:107B60000000FF000000FF000FFFFFFF0000FF000C
+:107B70000FFFFFFF000000FF0000FF000000FF00FC
+:107B80000FFFFFFF0000FF000FFFFFFF000000FFDF
+:107B90000000FF000000FF000FFFFFFF0000FF00DC
+:107BA0000FFFFFFF000000FF0000FF000000FF00CC
+:107BB0000FFFFFFF0000FF000FFFFFFF000000FFAF
+:107BC0000000FF000000FF000FFFFFFF0000FF00AC
+:107BD0000FFFFFFF000000FF0000FF000000FF009C
+:107BE0000FFFFFFF0000FF000FFFFFFF000000FF7F
+:107BF0000000FF000000FF000FFFFFFF0000FF007C
+:107C00000FFFFFFF000000FF0000FF000000FF006B
+:107C10000FFFFFFF0000FF000FFFFFFF000000FF4E
+:107C20000000FF000000FF000FFFFFFF0000FF004B
+:107C30000FFFFFFF000000FF0000FF000000FF003B
+:107C40000FFFFFFF0000FF000FFFFFFF000000FF1E
+:107C50000000FF000000FF000FFFFFFF0000FF001B
+:107C60000FFFFFFF000000FF0000FF000000FF000B
+:107C70000FFFFFFF0000FF000FFFFFFF000000FFEE
+:107C80000000FF000000FF000FFFFFFF0000FF00EB
+:107C90000FFFFFFF000000FF0000FF000000FF00DB
+:107CA0000FFFFFFF0000FF000FFFFFFF000000FFBE
+:107CB0000000FF000000FF000FFFFFFF0000FF00BB
+:107CC0000FFFFFFF000000FF0000FF000000FF00AB
+:107CD0000FFFFFFF0000FF000FFFFFFF000000FF8E
+:107CE0000000FF000000FF000FFFFFFF0000FF008B
+:107CF0000FFFFFFF000000FF0000FF000000FF007B
+:107D00000FFFFFFF0000FF000FFFFFFF000000FF5D
+:107D10000000FF000000FF000FFFFFFF0000FF005A
+:107D20000FFFFFFF000000FF0000FF000000FF004A
+:107D30000FFFFFFF0000FF000FFFFFFF000000FF2D
+:107D40000000FF000000FF000FFFFFFF0000FF002A
+:107D50000FFFFFFF000000FF0000FF000000FF001A
+:107D60000FFFFFFF0000FF000FFFFFFF000000FFFD
+:107D70000000FF000000FF000FFFFFFF0000FF00FA
+:107D80000FFFFFFF000000FF0000FF0000001000D9
+:107D900000002080000031000000418000005200FF
+:107DA00000006280000073000000838000009400E7
+:107DB0000000A4800000B5000000C5800000D600CF
+:107DC0000000E6800000F7000001078000011800B5
+:107DD00000012880000139000001498000015A009B
+:107DE00000016A8000017B0000018B8000019C0083
+:107DF0000001AC800001BD000001CD800001DE006B
+:107E00000001EE800001FF0000000F8000007FF8FD
+:107E100000007FF8000005F60000350010000000AB
+:107E2000000028AD000029180000291900000005F5
+:107E3000000000060001000100050206CCCCCCC900
+:107E40007058103C0000FF00000000000000FF0020
+:107E5000000000000000FF00000000000000FF0024
+:107E6000000000000000FF00000000000000FF0014
+:107E7000000000000000FF00000000000000FF0004
+:107E8000000000000000FF00000000000000FF00F4
+:107E9000000000000000FF00000000000000FF00E4
+:107EA000000000000000FF00000000000000FF00D4
+:107EB000000000000000FF00000000000000FF00C4
+:107EC000000000000000FF00000000000000FF00B4
+:107ED000000000000000FF00000000000000FF00A4
+:107EE000000000000000FF00000000000000FF0094
+:107EF000000000000000FF00000000000000FF0084
+:107F0000000000000000FF00000000000000FF0073
+:107F1000000000000000FF00000000000000FF0063
+:107F2000000000000000FF00000000000000FF0053
+:107F3000000000000000FF00000000000000FF0043
+:107F4000000000000000FF00000000000000FF0033
+:107F5000000000000000FF00000000000000FF0023
+:107F6000000000000000FF00000000000000FF0013
+:107F7000000000000000FF00000000000000FF0003
+:107F8000000000000000FF00000000000000FF00F3
+:107F9000000000000000FF00000000000000FF00E3
+:107FA000000000000000FF00000000000000FF00D3
+:107FB000000000000000FF00000000000000FF00C3
+:107FC000000000000000FF00000000000000FF00B3
+:107FD000000000000000FF00000000000000FF00A3
+:107FE000000000000000FF00000000000000FF0093
+:107FF000000000000000FF00000000000000FF0083
+:10800000000000000000FF00000000000000FF0072
+:10801000000000000000FF00000000000000FF0062
+:10802000000000000000FF00000000000000FF0052
+:10803000000000000000FF00000000000000FF0042
+:10804000000000000000FF00000000000000FF0032
+:10805000000000000000FF00000000000000FF0022
+:10806000000000000000FF00000000000000FF0012
+:10807000000000000000FF00000000000000FF0002
+:108080000000000000000001CCCC0201CCCCCCCC24
+:10809000CCCC0201CCCCCCCCCCCC0201CCCCCCCC4A
+:1080A000CCCC0201CCCCCCCCCCCC0201CCCCCCCC3A
+:1080B000CCCC0201CCCCCCCCCCCC0201CCCCCCCC2A
+:1080C000CCCC0201CCCCCCCC00000000FFFFFFFFE9
+:1080D000030303031342020250505020706080508B
+:1080E0000200020006040604000E0000011600D67D
+:1080F000002625A0002625A0002625A0002625A0D4
+:1081000000720000012300F3002625A0002625A010
+:10811000002625A0002625A00000FFFF000000008B
+:108120000000FFFF000000000000FFFF0000000053
+:108130000000FFFF000000000000FFFF0000000043
+:108140000000FFFF000000000000FFFF0000000033
+:108150000000FFFF000000000000FFFF0000000023
+:108160000000FFFF000000000000FFFF0000000013
+:108170000000FFFF000000000000FFFF0000000003
+:108180000000FFFF000000000000FFFF00000000F3
+:108190000000FFFF000000000000FFFF00000000E3
+:1081A0000000FFFF000000000000FFFF00000000D3
+:1081B0000000FFFF000000000000FFFF00000000C3
+:1081C0000000FFFF000000000000FFFF00000000B3
+:1081D0000000FFFF000000000000FFFF00000000A3
+:1081E0000000FFFF000000000000FFFF0000000093
+:1081F0000000FFFF000000000000FFFF0000000083
+:108200000000FFFF000000000000FFFF0000000072
+:108210000000FFFF000000000000FFFF0000000062
+:108220000000FFFF000000000000FFFF0000000052
+:108230000000FFFF000000000000FFFF0000000042
+:108240000000FFFF000000000000FFFF0000000032
+:108250000000FFFF000000000000FFFF0000000022
+:108260000000FFFF000000000000FFFF0000000012
+:108270000000FFFF000000000000FFFF0000000002
+:108280000000FFFF000000000000FFFF00000000F2
+:108290000000FFFF000000000000FFFF00000000E2
+:1082A0000000FFFF000000000000FFFF00000000D2
+:1082B0000000FFFF000000000000FFFF00000000C2
+:1082C0000000FFFF000000000000FFFF00000000B2
+:1082D0000000FFFF000000000000FFFF00000000A2
+:1082E0000000FFFF000000000000FFFF0000000092
+:1082F0000000FFFF000000000000FFFF0000000082
+:108300000000FFFF000000000000FFFF0000000071
+:108310000000FFFF00000000FFFFFFF3318FFFFFB1
+:108320000C30C30CC30C30C3CF3CF300F3CF3CF391
+:108330000000CF3CCDCDCDCDFFFFFFF130EFFFFFF3
+:108340000C30C30CC30C30C3CF3CF300F3CF3CF371
+:108350000001CF3CCDCDCDCDFFFFFFF6305FFFFF5D
+:108360000C30C30CC30C30C3CF3CF300F3CF3CF351
+:108370000002CF3CCDCDCDCDFFFFF4061CBFFFFFEB
+:108380000C30C305C30C30C3CF300014F3CF3CF323
+:108390000004CF3CCDCDCDCDFFFFFFF2304FFFFF2E
+:1083A0000C30C30CC30C30C3CF3CF300F3CF3CF311
+:1083B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF22
+:1083C0000C30C30CC30C30C3CF3CF300F3CF3CF3F1
+:1083D0000010CF3CCDCDCDCDFFFFFFF731EFFFFF3C
+:1083E0000C30C30CC30C30C3CF3CF300F3CF3CF3D1
+:1083F0000020CF3CCDCDCDCDFFFFFFF5302FFFFFCF
+:108400000C30C30CC30C30C3CF3CF300F3CF3CF3B0
+:108410000040CF3CCDCDCDCDFFFFFFF3318FFFFF2F
+:108420000C30C30CC30C30C3CF3CF300F3CF3CF390
+:108430000000CF3CCDCDCDCDFFFFFFF1310FFFFFD1
+:108440000C30C30CC30C30C3CF3CF300F3CF3CF370
+:108450000001CF3CCDCDCDCDFFFFFFF6305FFFFF5C
+:108460000C30C30CC30C30C3CF3CF300F3CF3CF350
+:108470000002CF3CCDCDCDCDFFFFF4061CBFFFFFEA
+:108480000C30C305C30C30C3CF300014F3CF3CF322
+:108490000004CF3CCDCDCDCDFFFFFFF2304FFFFF2D
+:1084A0000C30C30CC30C30C3CF3CF300F3CF3CF310
+:1084B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF21
+:1084C0000C30C30CC30C30C3CF3CF300F3CF3CF3F0
+:1084D0000010CF3CCDCDCDCDFFFFFFF730EFFFFF3C
+:1084E0000C30C30CC30C30C3CF3CF300F3CF3CF3D0
+:1084F0000020CF3CCDCDCDCDFFFFFFF5304FFFFFAE
+:108500000C30C30CC30C30C3CF3CF300F3CF3CF3AF
+:108510000040CF3CCDCDCDCDFFFFFFFF30CFFFFFE3
+:108520000C30C30CC30C30C3CF3CF3CCF3CF3CF3C3
+:108530000000CF3CCDCDCDCDFFFFFFFF30CFFFFF03
+:108540000C30C30CC30C30C3CF3CF3CCF3CF3CF3A3
+:108550000001CF3CCDCDCDCDFFFFFFFF30CFFFFFE2
+:108560000C30C30CC30C30C3CF3CF3CCF3CF3CF383
+:108570000002CF3CCDCDCDCDFFFFFFFF30CFFFFFC1
+:108580000C30C30CC30C30C3CF3CF3CCF3CF3CF363
+:108590000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9F
+:1085A0000C30C30CC30C30C3CF3CF3CCF3CF3CF343
+:1085B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF7B
+:1085C0000C30C30CC30C30C3CF3CF3CCF3CF3CF323
+:1085D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF53
+:1085E0000C30C30CC30C30C3CF3CF3CCF3CF3CF303
+:1085F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF23
+:108600000C30C30CC30C30C3CF3CF3CCF3CF3CF3E2
+:108610000040CF3CCDCDCDCDFFFFFFF3320FFFFFAC
+:108620000C30C30CC30C30C3CF3CF300F3CF3CF38E
+:108630000000CF3CCDCDCDCDFFFFFFF1310FFFFFCF
+:108640000C30C30CC30C30C3CF3CF300F3CF3CF36E
+:108650000001CF3CCDCDCDCDFFFFFFF6305FFFFF5A
+:108660000C30C30CC30C30C3CF3CF300F3CF3CF34E
+:108670000002CF3CCDCDCDCDFFFFF4061CBFFFFFE8
+:108680000C30C305C30C30C3CF300014F3CF3CF320
+:108690000004CF3CCDCDCDCDFFFFFFF2304FFFFF2B
+:1086A0000C30C30CC30C30C3CF3CF300F3CF3CF30E
+:1086B0000008CF3CCDCDCDCDFFFFFF8A042FFFFFBB
+:1086C0000C30C30CC30C30C3CF3CC000F3CF3CF321
+:1086D0000010CF3CCDCDCDCDFFFFFF9705CFFFFFE5
+:1086E0000C30C30CC30C30C3CF3CC000F3CF3CF301
+:1086F0000020CF3CCDCDCDCDFFFFFFF5310FFFFFEB
+:108700000C30C30CC30C30C3CF3CF300F3CF3CF3AD
+:108710000040CF3CCDCDCDCDFFFFFFF3320FFFFFAB
+:108720000C30C30CC30C30C3CF3CF300F3CF3CF38D
+:108730000000CF3CCDCDCDCDFFFFFFF1302FFFFFAF
+:108740000C30C30CC30C30C3CF3CF300F3CF3CF36D
+:108750000001CF3CCDCDCDCDFFFFFFF6305FFFFF59
+:108760000C30C30CC30C30C3CF3CF300F3CF3CF34D
+:108770000002CF3CCDCDCDCDFFFFFF061CBFFFFFDC
+:108780000C30C30CC30C30C3CF3CC014F3CF3CF34C
+:108790000004CF3CCDCDCDCDFFFFFFF2304FFFFF2A
+:1087A0000C30C30CC30C30C3CF3CF300F3CF3CF30D
+:1087B0000008CF3CCDCDCDCDFFFFFFFA302FFFFF1E
+:1087C0000C30C30CC30C30C3CF3CF300F3CF3CF3ED
+:1087D0000010CF3CCDCDCDCDFFFFFFF731CFFFFF58
+:1087E0000C30C30CC30C30C3CF3CF300F3CF3CF3CD
+:1087F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF21
+:108800000C30C30CC30C30C3CF3CF3CCF3CF3CF3E0
+:108810000040CF3CCDCDCDCDFFFFFFFF30CFFFFFE0
+:108820000C30C30CC30C30C3CF3CF3CCF3CF3CF3C0
+:108830000000CF3CCDCDCDCDFFFFFFFF30CFFFFF00
+:108840000C30C30CC30C30C3CF3CF3CCF3CF3CF3A0
+:108850000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDF
+:108860000C30C30CC30C30C3CF3CF3CCF3CF3CF380
+:108870000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBE
+:108880000C30C30CC30C30C3CF3CF3CCF3CF3CF360
+:108890000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9C
+:1088A0000C30C30CC30C30C3CF3CF3CCF3CF3CF340
+:1088B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF78
+:1088C0000C30C30CC30C30C3CF3CF3CCF3CF3CF320
+:1088D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF50
+:1088E0000C30C30CC30C30C3CF3CF3CCF3CF3CF300
+:1088F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF20
+:108900000C30C30CC30C30C3CF3CF3CCF3CF3CF3DF
+:108910000040CF3CCDCDCDCDFFFFFFFF30CFFFFFDF
+:108920000C30C30CC30C30C3CF3CF3CCF3CF3CF3BF
+:108930000000CF3CCDCDCDCDFFFFFFFF30CFFFFFFF
+:108940000C30C30CC30C30C3CF3CF3CCF3CF3CF39F
+:108950000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDE
+:108960000C30C30CC30C30C3CF3CF3CCF3CF3CF37F
+:108970000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBD
+:108980000C30C30CC30C30C3CF3CF3CCF3CF3CF35F
+:108990000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9B
+:1089A0000C30C30CC30C30C3CF3CF3CCF3CF3CF33F
+:1089B0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF77
+:1089C0000C30C30CC30C30C3CF3CF3CCF3CF3CF31F
+:1089D0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF4F
+:1089E0000C30C30CC30C30C3CF3CF3CCF3CF3CF3FF
+:1089F0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF1F
+:108A00000C30C30CC30C30C3CF3CF3CCF3CF3CF3DE
+:108A10000040CF3CCDCDCDCDFFFFFFFF30CFFFFFDE
+:108A20000C30C30CC30C30C3CF3CF3CCF3CF3CF3BE
+:108A30000000CF3CCDCDCDCDFFFFFFFF30CFFFFFFE
+:108A40000C30C30CC30C30C3CF3CF3CCF3CF3CF39E
+:108A50000001CF3CCDCDCDCDFFFFFFFF30CFFFFFDD
+:108A60000C30C30CC30C30C3CF3CF3CCF3CF3CF37E
+:108A70000002CF3CCDCDCDCDFFFFFFFF30CFFFFFBC
+:108A80000C30C30CC30C30C3CF3CF3CCF3CF3CF35E
+:108A90000004CF3CCDCDCDCDFFFFFFFF30CFFFFF9A
+:108AA0000C30C30CC30C30C3CF3CF3CCF3CF3CF33E
+:108AB0000008CF3CCDCDCDCDFFFFFFFF30CFFFFF76
+:108AC0000C30C30CC30C30C3CF3CF3CCF3CF3CF31E
+:108AD0000010CF3CCDCDCDCDFFFFFFFF30CFFFFF4E
+:108AE0000C30C30CC30C30C3CF3CF3CCF3CF3CF3FE
+:108AF0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF1E
+:108B00000C30C30CC30C30C3CF3CF3CCF3CF3CF3DD
+:108B10000040CF3CCDCDCDCD000C0000000700C003
+:108B200000028130000B8158000202100001023067
+:108B3000000F024000010330000C0000000800C0DC
+:108B400000028140000B8168000202200001024007
+:108B500000070250000202C00010000000080100DF
+:108B600000028180000B81A8000202600001828067
+:108B7000000E829800080380001000000001010030
+:108B80000002811000090138000201C8000101E85B
+:108B9000000E01F8000002D8CCCCCCCCCCCCCCCC94
+:108BA000CCCCCCCCCCCCCCCC00002000CCCCCCCC15
+:108BB000CCCCCCCCCCCCCCCCCCCCCCCC0000200005
+:108BC000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCE5
+:108BD00004002000CCCCCCCCCCCCCCCCCCCCCCCCE1
+:108BE000CCCCCCCC4100200003030303034202029F
+:108BF0005050502070608050131313131342121200
+:108C000050505020706080500301020000000000AE
+:108C100000000000000000001F8B080000000000A2
+:108C2000000BFB51CFC0F0038A0F093230688A2055
+:108C3000F8C4E05C760686751C0C0C5BB849D3075B
+:108C4000C32C0C0C0CDA4CE4E905E1FBBC0C0CAFBA
+:108C50008098850F559C871342FF015AC0C7CAC030
+:108C6000A0C1865DFF3A35043B408581A11C88D9AF
+:108C7000941818CC5411E2D2EA0C0C3380FC04A8EE
+:108C8000D81D201DAB46BE9B47F1E0C1378D51F981
+:108C90005B0DA169012A7E0B4D7E1B54BE4A074223
+:108CA000DF36C66E6EB50E71F69FB546E5AFB4C63B
+:108CB000AFFEAE3D2AFF209AFAAD503E00C5D55B0F
+:108CC000A7D8030000000000000000000000000022
+:108CD0001F8B080000000000000BED7D7F7C14D589
+:108CE000B5F8999DD9D9D9CDEE6608096C20E02454
+:108CF000861AFB82DFE577A841878034B63CDF8A9D
+:108D00005AD3D6F6BB506C551456BF3EE1F56933C5
+:108D1000F941122262049FDAD61F2B554BFB6C8956
+:108D2000942AAD3FDE024AF1F5C743AAD5D7A22F58
+:108D3000FE80AA455FC4D2D87E51DE3DE7DEC9CEB3
+:108D40004C76930DD01F7FBCF081E1CEDC1FE79EF7
+:108D500073EE39E79E73EE8DEAF3C3C7CE05388E06
+:108D60003FECD913028059D9A771F5BCAEBE99006A
+:108D70004721D2D35D0AD0A68009AC6C1D88A41F00
+:108D800094007F6A14565E2D7F3CDE5D097067D1CA
+:108D9000D7EEC3FA6B2C0502ECD9DD0C9039837D3C
+:108DA0000F453743314011A4B6E277F6937890F53A
+:108DB00037109C9C866876FC32F0D1B80015FAA179
+:108DC00022AA07C765F6CF81E47C18072083FDB38C
+:108DD000067A593FCAF3721AC795E5C5FA8B55D979
+:108DE0007EBC4F595721A389FEF01FF9B2E26438C7
+:108DF0007FFD35072AB73E5D93AD7F06444A0FFDE0
+:108E00001DFB8F020AC123AF07C4C3D130A4E5CA3A
+:108E1000FCFD0C341B5B9FF6231EBF509C989ABF31
+:108E20009E8DA7AE668D9E1DCD3A6402000C64B384
+:108E3000B7963DC3606EAE1DDA6E0148842FCDB08B
+:108E4000089EF6B02F5D5489502701187EFD881FBB
+:108E500009DF2FD1CC1CEDED279432FCD8F36578D7
+:108E60000C02EF0FD8FC1E64FD0571FC1CF8BA085B
+:108E7000C72F63DFAB878E6FCD3CF1F1436702EC08
+:108E80000B23BE4D84017C7A0AE282DE9F9486E940
+:108E900047D05931783F23E1BDA8C6971D97FD0DF6
+:108EA0001A21179F0462256EBEF1F225E2A90CE992
+:108EB0006548AF4FC9F6AB22DD72E0EB4A81AFFEE9
+:108EC000F989A604C3C7DA66B05E73B4936360A67B
+:108ED00073E069B568678FA794B27A39FA076811A9
+:108EE000EBC772D52F14BE9B4E10BE9BFF42F0DD28
+:108EF00026F89D49287AF6CF4F129CDEFE72AD2FE0
+:108F0000B68807CB21256DF990BF4B21FE207BF859
+:108F100035BECEECEFDF073FF5B303250E1BA74DA3
+:108F2000C0D73F9FCBBFB5D3D4F46689E4910BCEB5
+:108F300087517EB1769224F0A1F502F25FD1070A43
+:108F4000C05884CF844404605D7583369CFC015D09
+:108F5000F9539FCD775543F9EEE36C18842B14CE6B
+:108F60008DA7EF0FCAD1CBACD7583F5A90BD3F1D4C
+:108F7000FB2D8D55CC069C1DFDF8C577907CF271BC
+:108F80005CB7C758BDD942CECAD43FC911A8009218
+:108F9000F7B2A84FE3B0FA01362D733A7BE2FB1A21
+:108FA000318E34B45F6FBB0128E1F811F0D8725DE7
+:108FB0008627A89F41789404E1CBFBDECFDEEBE16E
+:108FC000937F7FB265BF9167BC1E89F869A4F6AF35
+:108FD000087E19C29F79E8BA5FAC33057A4D383DF7
+:108FE000CB47367F9D281F9D349FB0E1495FE4E168
+:108FF000130B52B46E5835AB7BDAE8F925079F6442
+:109000009CF5174B63F83C9438F10B834721BED590
+:10901000393C65D34BA93F09D7F819D88328231EBB
+:10902000D87C97D9ED214EEB3584768EA33D9B1CE1
+:10903000C12BC99290FBBCDE0D629DCF6BA8E0F006
+:1090400083E8DF032FEB4F73F627438587CF39DCA7
+:109050001B242EDF58FD0CE1D33BBE2211BC322471
+:109060002C1F6BB7598CEF955FF673BBE86FBD048F
+:109070004DBD61BE9E9638F4618324E484C6D799C1
+:10908000573EF991AF669C385F152AD7174BB9F553
+:109090000EB38A621746F2EB9D629FAD0F323141EB
+:1090A000B751D1FD74A9C445F742E15D7682F04E17
+:1090B0001C0A6F417C76A6E41B959EBCE104E10B83
+:1090C0007AE03B557C3D43F059A1F0DBEB60B4F016
+:1090D000CB43F15BD03A9A3B4AF8369F207ECB7C5B
+:1090E000B69D24E0CBB36EE7097A5BC0F9436176A5
+:1090F00038EE730A85EFD191E103F804FB6BBD6A8A
+:10910000990AD96B0013009E6E79D5B2942C7C26F7
+:1091100070B93EDAF1F78C4C3F31FE5B96599D1DDC
+:10912000FFF996B75CE32B8C7F90D90A1DF7854237
+:10913000E70DEFB9E6FDBAF49E6BDC13C5FBC18207
+:10914000C7FFA36BDEEF4B7F74CF3BCCE67D7AE1AC
+:10915000E3FEFE04F9B152AC97064977E9817CF64B
+:10916000FB0C41D7BBEDFA36BC79EA9F29E06A2FA8
+:10917000B0FE44D1FFE70AACDF2BFAEFC5FA652356
+:10918000D73F5DD44F15585FF2F175984F7FCE975A
+:109190006CFC816BFFD1A6713F88D9A640F09CA1E1
+:1091A0007E13AB21F5ED3E467BAB35A0B79592DF44
+:1091B00084FC226B0012E837F92624EB7CAC1F6399
+:1091C000C74DF761BD238AA677EBC01724FB1E3C71
+:1091D00010D9DC5D991D6FB59C6C929097DAA2FA5C
+:1091E00083E45F493549EC59668575F4DB0C5425F9
+:1091F0005A9696E23C0CDD62FDFCFA8A8B76627927
+:109200009326E9322BFFCB39736FFB0C6B35F0E102
+:10921000CE974EC37AD3C655B592BC3425C44F6998
+:109220005C35E5287B5E7C71561FE03F8B1D6566D3
+:10923000077CB6E9122EFFC5F7CF27DDE54B1A2FC5
+:1092400071B5BF34E1FE9E9D0FF07DC7B9DCFF30E4
+:109250005095FA2F0ED7C72A2DEE5FA0F9EA565483
+:10926000EF66F35CFFE1B5545EDF52ABB7B2F2E7F5
+:10927000AEF4B72C65CFB004BACC9652715CA5F9A8
+:10928000029BAF5AC7768FE73CDB35DBC8BFFF2AAE
+:10929000363DF38C5F9C8593CDB3E9EADC70ABFA85
+:1092A000FB13DE60F6D2C0CEA089F084F7CAE9A035
+:1092B0004474DD3909E9621527397D40AA66CF2358
+:1092C0008D3AA07FA4A13169C8ACBC31A6C5030604
+:1092D000DAC9190DF11E411ACC65EFE3BE20DA633D
+:1092E000AAFE07EA5F17DF7BE255E3D13FF2E3E630
+:1092F000351315B6DE77345BF47CB4B98B9EDB9BFB
+:109300007B262ACC88DFD27C173DEDF9A12431ECF5
+:10931000F9C9B8AF365B91DF06FCCC34423CCEF7DE
+:10932000D1FE7603CA113FCAE1745B14DFD7C1B422
+:109330006E40B9C4E5CBC6F8B6DDF87E633D4C435C
+:10934000926D3437B745D93CAE2B87E9D8F7CE9725
+:109350001FE3DF2B607A8095773536905CED89FBD3
+:10936000D2814A82FF7CE4E79E461F3093078AEB56
+:10937000185C0EBC0662EEF2AE4626B066123ED215
+:1093800001293B7F852D33C4C746B32AE8DC57CF7C
+:10939000DAE76E7F66DA5DDE88ED87F14BCDED733F
+:1093A000D79FF392BBCC24DB2B837CC0F1F8AF3E7C
+:1093B000260F76BF3CDE67E1BC4D3E4FF6E4FEC2B1
+:1093C000982F8DC6E716813F1BBF03112E5F3636DF
+:1093D000733F603E78367EEAAAD8707E03B5B1232B
+:1093E00081FE54B5B1270167E1332D9EBD09A79FCA
+:1093F000D57EBE88C68FC35FD211DB58B2B4360BA0
+:109400008FB7FE785925793750C6BF77C45ED3979A
+:10941000D63AFB93BCDFB5CBC3CEEFDCAF32506E98
+:109420007F3FA22D0DE7683F897DCF4197A532FF91
+:10943000FEF4CB81863B901F057E77BFFC13AD1AEF
+:10944000F1FDBC0CC8671BF73590BC453E4379B1B4
+:109450008BF1455F2DD27FFD2BCE755B5CE72E3304
+:10946000BEE2FCC5FAC5A17E86F4601DFEBBF0CB52
+:10947000EE157ED93DCD317A3EDD6CD07357730D3C
+:109480007DCF34C7A9FC54731D959F6836A9FCE3B2
+:10949000E6462AEF684E50F9D1E6267A6E6F4ED234
+:1094A000734BF315F464FC4BFCBCA13925FCC06B79
+:1094B0005CFCF0F7F1808BFF3E5DE32E9F6F9C918B
+:1094C0005DD7ECEF2763EEF279FA275DE5059ABBED
+:1094D0003C1FBEE2EAEFDC0FBEEC2ACFEBEF70D50B
+:1094E0003FFB4D77796EDF439EF5E22ECFDAB7C7AB
+:1094F000B31EDDE5E2BA43AEFE023177F97E1432E7
+:109500005C4E117F74C45A4B72F2CFE0F78DA12FDD
+:10951000B9BECBD47E64FE59D65589FC93F6C52DD1
+:10952000943B26E7275BEE78F9C4A6DB48FC65C3CD
+:10953000F197E6ABFFE5A7E1F9A9607EA85772F2C3
+:109540008397EE5EFE18226704BFFC2F1FFC6DF0B0
+:1095500001CC64C42ECFAF5773D877649F061240F6
+:10956000F69D1FED34477B75722A69E6D09F57F947
+:10957000E66F95593F8152E8C0786840C9E3E795A6
+:10958000F93E25A0F1EFC16A93ECB26230A6CB633D
+:1095900000AE796C5EF932F6FEE7421F765C089603
+:1095A000C4FA1B37414DE23EA6B8DABDDF7B46E682
+:1095B000FB18FBB9E9879126FC0EA5334798378F36
+:1095C000D7C8136737FDC660CF0B666F59CBDE86F1
+:1095D000AA9319F2019596927D9A0C19D4AF5997D6
+:1095E000B67CA518478338DA8972D884241B67AE05
+:1095F000CFFC05CE9BD947FF21CFCADA3D9BC4F3F0
+:1096000047621D5EE4337F29EA3D3F5C3D7BDC1110
+:10961000E905494BE2FEA9F8830C447F69DC653F0C
+:10962000D9F353948499C8616FFC4EE04BD2E34D5B
+:10963000DC0FA202CA877CF50FCAB6FFC972ED071C
+:109640008BA13F23231C311E6F82631719174E1DF8
+:109650000A87AA2492380EC6AB37B371DAC77CC624
+:10966000483AC6F948E67E2A2966123CAACEE1515C
+:1096700095B899C8C14703021EBB1F3B6E26C5FAA9
+:10968000A12F9C856F6D30D184FB256B8C4A786A45
+:109690008FB8EDAF190AEFA75A3CDBFDB9ED438057
+:1096A00056BE1F1E57A761FF6D750D1ADAD78C1DA8
+:1096B00068BFD21E5E523C9CBDBD5ED8BFDD280F88
+:1096C00003180FD785BC8AD1B33DBCAD11D7C1D12A
+:1096D0005A8687CAFCFD44E2EEB86E514DC813C7E6
+:1096E0004D139C41A3C413EF9DE06AE71FA7F8EC5C
+:1096F000B8364823C3DF21E0B7EB752A294DCF895F
+:10970000273EBE5D0EC4DCF0FEF9F0C7DB17F97B27
+:10971000F55C709D2ABCE58BC3DA4F75AC9A4A7331
+:109720007F4ACCB90E3E2BF84B1DABA5483E69F9DC
+:10973000BE8778FB7082FC5B5A38614055361EABA1
+:10974000E17A70E0E95AD1EED78A4FACCB540CFDE8
+:109750005C92916A427ED22AD83A9286B6B39F49E9
+:10976000D1BEF3C3FFF712AD93328DD68964B075C5
+:1097700094631C4931AF56D8F31DD9BC46C1F8CC0F
+:10978000477232D77A5921E0D116270CAD8A427838
+:109790003CDFC303C73A85EB834336FC568AFC564D
+:1097A00085C2BFA640F8ED7118FCED02FEB5C3C13D
+:1097B000DF26E02901A3857C990697B300171ACE0E
+:1097C000BC8B37C4F825424E314C11DDECEFFF2540
+:1097D000FA29743E1B059C23CDE78D2C3DEEC579FF
+:1097E000B0F9DC87F3CA379F7B041C6F285CCF6815
+:1097F000898411AB22559F93AF9E1070F42B228E5B
+:10980000665D3B2ABEFAD702E7F144962E8F09BA6D
+:10981000EC186E1E8F8A79F4C830F70DF4339E2E43
+:10982000F40E2C71D1E5A8C04F4FC0A6CB752EBA4F
+:10983000FC4ECCABD0F93C53209F1DCDD2E5393145
+:109840009FFDC3CDC751FF4551FF25519FFCE74701
+:10985000952B5AAD5AFC9E38A0CCCA8EC7EABDECF7
+:10986000AC776DFB2CBBDEABC80F5223D783ACDECD
+:109870006BCE7A605DD08AF6DB5A8C897E02E081FD
+:10988000F6AF3688766F52BBC583FDBF25D607B5C8
+:109890005BD73EBFD50A53BD77F07DCB828FEC7A84
+:1098A000EFBAE15D61C37184E04D0CC2F1BEB3DE7D
+:1098B00013CAE7A9BF217947B19282EC1F7F699251
+:1098C000F2F74A20D283FEC50E2545FE640C36A071
+:1098D0001F7275204EA92A23F9A3CB2EE6ED7445FD
+:1098E000237F6A005270177BBFA154A1F8C862257C
+:1098F00019F1A31D21252D0AAE827E590BF63FD604
+:10990000A0FC2F1B9EDB8ABED845FD3078B0DF3B24
+:109910008BA23B91AF364E520DE4AB9D936E20BFB0
+:10992000F96D2D3C7FF0B6F355DA676D7A3942FA5E
+:1099300077AD12FF2CD6B74CD5403FFAEAD0472F6F
+:109940002D67E5BE96625D3A87E641705B3E48B49E
+:10995000CD74E42332B80371CAA7233FDC6D8D3C7C
+:10996000AEC37ECAB1FDEA0546BCDB40F1C5E418D2
+:10997000FBDE59A792FD7A5B45D57C1C6F539D4653
+:10998000F6C6A6C5552DE4C7AB0B91BFB2246C48F3
+:10999000E8678FCE519901CECAA5460BDA9B91D9C3
+:1099A0002140BF5349051F2F7206901FCA0F3D89E2
+:1099B0006AF68C76A990198BFD2DC97C09ED99BAB0
+:1099C00000F9E1D9C4F6D78EA39437FE23FF0C101B
+:1099D0001EFF441910EF367DA33D83ED87CD638CC8
+:1099E000A60BAC9729AC5EA44B81CC8C02EAF51493
+:1099F000582F5D60BD0CAF17800B87CDE78338CF44
+:109A000023D4D81F9EC7E8C82BACE4F6BBD36EF1B5
+:109A10007BBE8F362FF42ABFC80B9D0373785EE898
+:109A2000F0EDED7CD091E60BE0CBC2298F5C7F6D31
+:109A3000F3F07E63FFB81B62987FD959F655F1BCED
+:109A4000913FCBC5FBF2353194779DE5E27BF98DF3
+:109A50004DB9F6AF77FAB91CAE81C4B0742811F0D5
+:109A60001F62B0637E4F8DC2EA47F2D7574B7DC36A
+:109A7000E6596A8AD540EB76B18FD66D008501AE86
+:109A80009B0ABE8EFD904A54F37855B4DCB17EFC3F
+:109A9000F57B68FDFCA25C06A98EE813473C7AF9C9
+:109AA000C4CB170170942B4F9E4FB6FE99F8C4DFBC
+:109AB0002517B47EFC3D05D64B17582F53583DB59E
+:109AC0004B2A48AEA83D05D64B17582FC3EBAD9D8A
+:109AD000AB727D0E7F68C578BFFF139AABBCF613DF
+:109AE00021F7F7B3C3AE72C72C777B75B6BB7DC7C2
+:109AF0006C777B750E6F1FEC800518CF2F749D1C43
+:109B00003CC17552A30D5F3F5237C2BAD2F420B6A2
+:109B10002F510CC89492BE4A0BBD95331E7E9ACA33
+:109B2000D77F959FC7CF6F53F420EE23FFD6E72949
+:109B3000A93C9FC09EEF48F0DAF2F7B7B2B0B7F297
+:109B4000E47D438C9F7FF043288E768EB1506B78F6
+:109B500085E1D1FF2CCF7BF7F6FB8A9A9CA63AF6DB
+:109B6000C5CC3E83A4C30F737E99C2F36D181DD07C
+:109B70001E5221D158C9FA6BABF0913DA28447D057
+:109B80001B150EB995232F2FEB970213CF53D02718
+:109B90000360FE9B7CDC501C08EE08F4D166BA180A
+:109BA00053E54E07180386C493BEE212CF13ACD719
+:109BB000519E95064F75BF9751BF92791B1C2F1A66
+:109BC00045BF4A1FE5CB9CF27E478037087753BFDD
+:109BD0006C97547A7C6CB65F7F2C452F314F56764C
+:109BE000E4CBE1B908CA37F1C53394DF30214AFB31
+:109BF000B2B5A5D7B9F2C1FF59AD72F98754BDE32B
+:109C00005A09E3BA15579B7DC3F079331357E4F72C
+:109C1000AC586EF6D5E4AF3798A78FF99E39D64188
+:109C2000879A4CA3FD6E4D0EF3FDBC92227F63A775
+:109C300054321DF32DEC7A4A0593B40CAEC84CD3C4
+:109C4000C2FD5EE7585F1CED5405D6EF93CE62ED82
+:109C5000E4C571A7FFD2FB542A94B79DF3B95D65A3
+:109C60007A12E1147AB26D047E1FD1EE51E3C95C21
+:109C70007ED16FAB7C5FEB0FE5FEDE176A78409D0F
+:109C800035146F8F217E717F3B06BAA4FFC3D9873D
+:109C9000F2A52AF6BC8478585BB62836DC7CD90657
+:109CA000EAF0205D18897F16321F4179300C1C3F85
+:109CB000CC0507840BF37FEB0BE3C48783F65229B3
+:109CC00088FD98199518DF870457DE32737306CF25
+:109CD00043F897864DA49F6C6E01F457DB76936C26
+:109CE000865EF5113DEBB9FD54C3ED2193FDC179BD
+:109CF00044EB87B7AB654FF939D56D0FB535EF003C
+:109D0000679E9BF75C85FD4C871A5ECC8D8FC2F6F3
+:109D1000C3B7337EC13CFB8DCD1A22057A9A752AD2
+:109D20006F688E51797DB341CFF6E61A7ADE8C4D9D
+:109D3000E7E2F9A7545725C35B57EC81D8E5ACCAD5
+:109D4000ED283B288FEFDE05682F770F96D93690E8
+:109D5000C1DD3D09785E9F7AEB02DCE7770741F8C9
+:109D600015DA16A05D9D2DDFD1361FCBC2CF10EACC
+:109D7000BC6F01EEF76F17F90FA098DA250EBD77CB
+:109D80005AC04FFC477B576A6FB5617F414594E1EC
+:109D90009105EE3298084F50E3E505816DD43F8977
+:109DA0000036DEA7033FE0E34D11F96DB54B46C029
+:109DB00023F7EF5BAAC1FD5DB525143F52E3717433
+:109DC000BFC2ED6304DC05F6034A92EB3B718E2FB4
+:109DD000FFBA1941AF093846A23F4307F9D1EDF365
+:109DE00069CA0BB9F5F4A91EF776FFE8F0A2D6F51B
+:109DF0005B7886ED09353927C0DA47CCDE4C252B58
+:109E00004717672C5ABE058E3B3660E7392669FD39
+:109E1000DB7856746E77ACF0D0D15FCAE3754171D0
+:109E2000FEA4507893AA1847F4030F37940F67AF36
+:109E300095257C68840DCA8BB18D21E19CE1E531CB
+:109E40006689AB5C5C37C1553F12AF727DF7EB1F83
+:109E5000777D3F513A5DE299C7A784DD6897CFF5DA
+:109E6000CEB3C07E0F1627560570DD34404D8AE113
+:109E7000F5CE2F3C44F80F0DAED385ED6605E58396
+:109E80008B753D8F9775FB7B5DBB59CFCA86FD7D7A
+:109E9000062F9BF6F738AF6FD9DFA7F2EF28F759F7
+:109EA000F96B9D67B45BF81D5AC96F0B152958E211
+:109EB000A0CFD8F10DAD08DFF8CBD2318BBDEFFECE
+:109EC00050E6F2007A62CE7A776ADC0FFDCC943BE2
+:109ED00062E8AF5C77E64331207927E58C07FE3CEA
+:109EE000C0F3C5CA42899E00AD77B3BF98F1E1A126
+:109EF000876483EB21E535D4873E8BE7E3AB10DF46
+:109F000067A25D54C3FDD521F19DE85899AD3F4846
+:109F1000574FF9EF34AED77F87491B0CCEEF159B17
+:109F2000F7D0B890961AD97AAFB0A01FCF1F81B0E2
+:109F3000FB26F2A6509A48939F6F12C3A7CCBE4F40
+:109F4000BEB8BFC5CF706D5CA6FB7089542D8FFB6A
+:109F500048C00DDA9163A5E3ECF93DA417CAE39B71
+:109F60005280FA7BED990F35215E02997F0283E1E1
+:109F7000ED1F27A5C040FF6F80C315B8AC07483E52
+:109F800057F7109EBDF85A3788F7B40BEF3F0970AA
+:109F90007F7E2CC9DB0DD65358BDA943EB75077BDB
+:109FA000E6AB68BF4DE178F48EF35E4012E776DDF4
+:109FB00070D8FD7AEBDF1210716D2D4DF18D67CEEB
+:109FC000BC21867EEDCE298CFEB5F9E97F4B80E77A
+:109FD0005B19C76E22B9DB3D6923C533D7556F26A0
+:109FE0007BF228B323F0FC747765EEF69DCD3C3F01
+:109FF000E65CB8BBB18AD1A7F37999FCB4DE7ADF0D
+:10A000000954B9E28D5A857B3FC8F8AF0FE5E8489F
+:10A01000FC27471EE0EB72947C8766213FCF50D629
+:10A020008EF6805F94EF0E1C6F13FA9FE47FF9F2B7
+:10A030001E70E64BBE2FF82213E0722658C1F9A31A
+:10A04000DB6F494EFAC5D8FBF98E76F9E8968F1F7B
+:10A050001E17EBE17D25DE44CA5F49E9B9E4B3127E
+:10A06000FBF42F173ACE7BB52B694D47F86B364A78
+:10A070004EBBF61B6632A439F627A1D805BF5C8813
+:10A08000FB1F259E739FFE29D38C6A6CFC9B9B61F2
+:10A0900046359E4B50AC00D6BB59C934D2BEA2DA6D
+:10A0A00047FEF27515D7EDC53C2BABD617C76A6DC9
+:10A0B00015BB1AAB0CE4976D9467FAA6BE2486FD17
+:10A0C0000462EA8CEAB194DF9DC079876B59BF0EB8
+:10A0D0007ADBE3DE2DF8F65BBA3959E3F2E034EDD2
+:10A0E0002F200FDE87788C1B590CCF39F65743F1A0
+:10A0F000CCF3043A2B86E0798EE6E0EB00E27906B9
+:10A10000C9FB9CFE0B86E7B35D780686E7A9593C40
+:10A110007757703C77D66CEEAA72E2B966D7DE4A02
+:10A1200003C7E7787E48E3E773438867079C5E3C94
+:10A1300087255BFF7CAC1DF9D6CBF70CEF7F8FF04A
+:10A14000D8EF3F0AFC82ECE1B1E313176AE43F4920
+:10A15000D1FEE94E29AF5EBA442B402F758A757443
+:10A16000A7C03FEBFF0BD47FA9E8DFD6B7421FFEA5
+:10A1700083F66F0B501FB27ACBA89E9EA27DF06033
+:10A180003D0B86D5A3ACDD95C447614FFF268C4AB5
+:10A190001FB37EAEA37E34CFF8069C949E67FDDE8F
+:10A1A00044FD2A9E7E4FB13DC1C6E926FC81070FC2
+:10A1B0007F663B2696F4F083D2E3927B363F942F62
+:10A1C00077D7CBAFD77AB85E1B6AD710DFFEBC73E8
+:10A1D000CF6EDC27BDA99BDF46BC8E761DD876608E
+:10A1E0005928B94DE376209D83B0BE51946E636DBE
+:10A1F00095E33D511E7F77EBA3F1B63D54CDF5407D
+:10A2000070947A699FB0D73AC6301955CC9EFE44F7
+:10A21000532E3FC3339A9DB7E6B69B7F8373243F8B
+:10A220005182FC6BEDB1CFECE863B4331B7B20971C
+:10A230009C4F86923FC7F9A9BA65927A15FE917C28
+:10A24000FD9626AC9D7B6792DCEDC7BC461072186C
+:10A250004D6BF4C74519DE0E69E4C288A37FADECEF
+:10A26000626B3ECAB10AC62F587F5CD33E29992B38
+:10A270003E6EEF7F10881CFB97719F9B9DA47CB85E
+:10A28000C53347D8DFB4D8F6EB6F715E87D49E0B29
+:10A29000A638F06ED3E90E2971E179284FE7713ABB
+:10A2A000158F924E03824EB098E7A19E7BEC5C8D99
+:10A2B000FC8B115F02FDF0417F8F5EE2E0A3713EF7
+:10A2C00048F68E02FE7AE8DF7D1CF77F611FED778E
+:10A2D000BBC3CBBE83F7EF58BA1A9F6264C7ED6663
+:10A2E000FABEC4A17FBCFEAAC17DF4E2C2F265A79A
+:10A2F000587328DE9FBD3FC89D7FC018AB06F3860C
+:10A3000056CBDC7F7E67D1D7280F618D15D003A592
+:10A31000A4C7C8FE5B27F2D93A453EDB5A91CFE687
+:10A32000B7566FC5FA9B0012E8976C9997A2787F91
+:10A3300054D1F4D638C2919A837A225A6AAFCF1F89
+:10A340002FC4F53958B6BED1DEC0E61B8DD9E58DD8
+:10A3500064BFB5B77079F3D9E00B0BAD7A64C53E35
+:10A36000A2C7A6BA25C5308C3F325CEBCE9F0B55F9
+:10A37000875C65ADA2C455564B270C1BB7F819FA7C
+:10A380008966E17CFA208E70E6C9179E12E476B6E3
+:10A390002C4FEBCF60BEC1D96A7CB381E7A8DD79D1
+:10A3A0009CED416E0F3E8A0E218AE30ABEA8E3713E
+:10A3B000D5A2B955BD180782319C2F304FD0C90F97
+:10A3C000F9F8E2AF8D1F5FD1E118E65DDCD21A0526
+:10A3D000CC73B965EEAFE21903E56A5F0CF333DACB
+:10A3E00098246965DF37CCFD9591CB9F7C404B2E3F
+:10A3F0000F22FEC209B2BF223393F4FC6BCF6B2451
+:10A400007ADE19E47A6E8AA0A782F49C99A5E7BA4D
+:10A410003A46CF99D975BE4EE9D10AA1E7F9387EFF
+:10A4200019CAA1FFA67DDBCD75BE46944306F45242
+:10A43000FEED865A9F0FFBFF6BE1C5862B3C97C94B
+:10A4400047A25326817A61435CF1A11CF99BE3C3C7
+:10A450008FFAE87D017CF8C35C7CB85CD0432EDACF
+:10A46000D7942BEF6E4A5072E1653DD28BE3A591F4
+:10A47000E3C5F757C1CBA0BED0922B916FAE88A990
+:10A48000B4EF564ABA3A285EC4F41EC61B56C8A694
+:10A4900081F126F8969FDFC7847ADBA15FFE180C56
+:10A4A00072FB445EBF88E2186C6AB82F63E58F0DBB
+:10A4B0001B0F4DFBFB9DF79478F3325E0BBAE31054
+:10A4C000472A961423BDF2F5F776F35E1DCFD5DA51
+:10A4D000F919DEEF2B6448E53AB72885346167F651
+:10A4E000AA84871B99AE9D86F8F8D8423C9FD9591B
+:10A4F000D13A8EEC1871AE61C5966775C501E70A51
+:10A5000085A9BFE943E763E37705AAC91247FBF4CE
+:10A510005E577B6FBBC1FE447B66B7F9430C3E536D
+:10A5200049EDC578B37D7E43DD323F436A330FDCAE
+:10A530008C8E270577A1E7388E3CD0D681FB6DB491
+:10A54000BF3EC1F8E4B78FC8F156F6F58ABBCF58C5
+:10A5500088E75A0F01E7179B3E6F3DD0362E175FF5
+:10A56000E4A3CF79A12087E714F3D759210F7FF512
+:10A570005E549C8153CF5F8BF3F197C0CFE15E8E29
+:10A580000FB86B6C4E3AE59BCF209DEC7682CFBC2A
+:10A59000EDF3B5637C95E07C95899E5D085F097855
+:10A5A0006DFA9D2CBC23F155608D6CE079AE4A2587
+:10A5B0004172B3B3F43A4BDCEB48F99E72CFB48CE2
+:10A5C000B8D74AE4B54306ED8940A949767448DC1A
+:10A5D000CFA355BBE5A612739F9B8835253276BF66
+:10A5E000E8BF0CAC5169DCC1F8711832C12896790A
+:10A5F0009C14C51FEE2B02F04DF27BB27639FD9E06
+:10A60000F65311F96A98CB4BF7B2C1E747C86F719F
+:10A610008F13BB78F8FC1A6F7D082BC62107DEF379
+:10A62000B753E090639FB341DC2B6AE3DFDCB29465
+:10A63000F2CA83E08BD3FE20D661E1BEAF43ACE724
+:10A640004E7CCEC573BCD375DAAF55F0788B257DC3
+:10A6500099FC0CF6B9337B3CFBBC995D6F24FAAFD7
+:10A66000C6F594637DEF0A717D3AF0B5D47FE33E81
+:10A67000C4FA1318780FC5E3CD1F509CFA9CCC5B2D
+:10A6800032FAF79F098DA37ECEE9EF931738D6E50E
+:10A6900039E21C0740AF9CEB9C97DF0AEC427E78C6
+:10A6A000EA30DF8F3D75F808D9E14FFDDE9746BEF1
+:10A6B0007BEA83E1F31E1E17FB22BBDEE3BFE7F656
+:10A6C000D9E34A6F512EFB2E3B7E9AEF070FBBF961
+:10A6D00015945E19F965E0A67D32FA071E6FD6A4BF
+:10A6E000D799FC9927E679CEE13E19F74D23CD6B3A
+:10A6F000AB87BEF63CB7D6737B746BFD9110FAFF47
+:10A70000B73EC1E77BB49E9F8FCD07EFAE669EDF5D
+:10A71000B1F589DCF86898C7F7C70D7EA334A75D4B
+:10A72000EB3967B54093DDE7BB4E317CBBEBB9DD60
+:10A73000B55B89874F049EBCEBBBAEA711DD08510A
+:10A740004836CE9708BDFB5D7E92035F6FF932E617
+:10A750006B2C0D9B12EE65A12FF3249B5789A92525
+:10A76000F0DE98E2FA1E6932E677C4781EF937AF58
+:10A770007E2DF3322BDFDC5444655D379E5B84F81D
+:10A7800028D5C99F72337A5C48407F732DE627D065
+:10A790007A64E5C0CD3DE7A13F4B012E2F98C56BF4
+:10A7A00028E3E85E3F72D2E4931BEC473A1EC8B63A
+:10A7B000CB3B4F4FDE6D00960C2FC796F3FA16FB7E
+:10A7C0008372A8C49367A22F74E7A5443DFD4F454B
+:10A7D0005BB5AC80BCF2931C670C6CD30CDC67D708
+:10A7E000FAF434D607630CE60D861B9981C4E83968
+:10A7F000460709CDE591F0BE0EA091FBBF33E03CCA
+:10A80000A7D350C4E5D584AB6E97709F7134CEB892
+:10A81000621A96DFCC997FD52EE4C76059DF45F2E6
+:10A82000B4037AF7525C20E9233BFCE6DAD631CE5A
+:10A83000F64B8B24DB1F28E80F86323B4B7F363FDD
+:10A840003378D65F8EFEB1E56EBC8F962ED714712D
+:10A85000793512FD4F761C9B6E43D7478BA0DB03E7
+:10A860001417EDAE195EEE0FA5DB36D277E1DADC18
+:10A87000F9BAD715492E796C3F3548419CF1892C9E
+:10A88000EE6796C7CF6EBA7F18F9233BEF67866CE9
+:10A890003FE38C1E13E356E3A1C7C473DF8CA7E329
+:10A8A0001940FE3601ED24661E111FC99EFDDC46CF
+:10A8B000C14741789EDAB35560E9A45752A03BF2F4
+:10A8C00054CE93C371F45FACD3C3742F12CA4F9E9E
+:10A8D000BFC3F3FC8B39480CBFFD80F22D542E838F
+:10A8E000857EBF7A01AFC4F80EF3FB0FBC7500F78D
+:10A8F0002BE1996E3A29078A28AF2DE43D2772E0B3
+:10A900009A6B687FE3A1E368F3FEBF5F24ECFF224C
+:10A910000893DD24DAE7CBDFB3ED7E1BBFC6B108B9
+:10A92000E5ED741C90081F659313F7E3FE0C7E257C
+:10A9300003CFCB0413F3F656FF74167D1F1A574846
+:10A9400054225DDE3A50A4B75616922F9948B6B0FD
+:10A95000FAC68140BCD520D5E2D3908E7D12D1516C
+:10A960001AA751BED6EA7FF7DF1F18265FCB8E3FAE
+:10A970000E96158BE29B5DC674CD294FCA42C95F06
+:10A980001639E3F622AEEBF5AF07C3EDB16760F41D
+:10A99000F18FD2F120E2F29F5F84F64B17AE019E59
+:10A9A0001747797A5DE5BCFC46D1944518DFE98A02
+:10A9B000F07271F8C8792D246713E4FF5BC3180E99
+:10A9C000F1087BFDE21E4963FC85C3C80BEFFCD791
+:10A9D0002BFB284FFE9EF0FEF3CF40FAC47DE48FA0
+:10A9E000BBE7FA6DAEFB93DED41BDE2FA2F5AAB750
+:10A9F000637C7A62D2CED774C74526A0D660F39B1B
+:10AA0000C408E3677838ED626845B6A9BCACB71CEA
+:10AA1000F7C96B4BB78DE1E7FD17EA87C86E972939
+:10AA20003E9D0F5EAF9D9E6FBE76BCDDDBFEAE0829
+:10AA3000BF47D51B17F3FA831E44FC9651FE2C60CA
+:10AA4000FE6CA7BF2F673CEA8D22EED76CAF5894FF
+:10AA5000B81CE7A598730F327CDC5B1AA57D90FFCC
+:10AA6000A2DA4B7D0E7BC3CE6753C47ECE5F9A22A3
+:10AA7000B9A86866D719182F7A5EC61505153D3B2B
+:10AA800025B4E7EDFB2010AD174FE5F3C579058040
+:10AA9000DBC5785EE1B863DE1073F8C1509E88FDB7
+:10AAA000DB29A0F7B4F0ACA1F49DDFC5F3D0635768
+:10AAB000F0F34D1395DCF41E7F99EEE3F1AF534BA9
+:10AAC000E77CEDF3C53DEF8AA8B47EA6E8ABF7E2DC
+:10AAD0003D771D567112E33103FE5417CAAB0DFFCB
+:10AAE000E883CD34FFD1E937454FD03D7A15297D34
+:10AAF0003A2EEF7CEDEE48ED0A129E2D9ECFE0FD42
+:10AB00007E7998EB9B9E94EF36FC6E3E9DDAE9C70A
+:10AB10007D678CEFABED7D783294BC3CECB0CF75AB
+:10AB2000D3223E9A92BC94E4C0405961F72F0CE2C4
+:10AB30002B4F1EF31D11AE97A718AB79BF9386F765
+:10AB4000CBDA78F9A04B16BF1721134438FC8C914F
+:10AB500013B82E6EE472E2EE35BBE8BD7263DF7CA3
+:10AB6000FEBDBF05F5EA1D3EB82297DFA82DC2E362
+:10AB70004193CDCC3AD41B93533E40FBF4F688412D
+:10AB8000EFC75FC6F1D43509E238EC69D81FFBCFB7
+:10AB90009E4A95F4D2D852A0FB92C6AE01D2DB6396
+:10ABA0006B206DB072D7CEB93BD1BE55AB218EAE06
+:10ABB000EBDD953758680F6CAA0013F5B8FF46B661
+:10ABC000C0587DD5F0A53150BC29B58CEE6959CB64
+:10ABD000D6255263ADD140F6C3D1182F072AF839D4
+:10ABE00098AE331582C3BE7F9CEC4EA61FFCB5FD0C
+:10ABF000265EFD65C015D48F7F2EA7AB71573D9D96
+:10AC000053EB1AF310DD4B635D033CDE69C7A515FA
+:10AC1000C65F6C9CF62BF49CFE9523A1E4B79DFCCB
+:10AC2000C0F891E44C17E613E4C0676798E3F30EAD
+:10AC300021E706FCF0298A97B4F8E83E176FFD6516
+:10AC400002FF775B4BFEE10C23AB6FECEF078B0C45
+:10AC5000977FA3E20395E6B348BE1174A43BB39378
+:10AC6000E8FE17BC18F4745A9617943BCEB3DC1B5D
+:10AC7000EF85C98867DB2EAAE5F68C7DEE91E12190
+:10AC8000730FFBAED705E87ED1F14DB9ED23B5408A
+:10AC9000FBA8ABC8FC6918F30D443EFFD7972F21E2
+:10ACA0007D9FEFDEDABB235CCEDF2559951D489FE3
+:10ACB00049FCFE196FBD83C25E64F620F1CD268B80
+:10ACC000DFBBB5896D7D1E45BEBA9EDFF3C7DEF3DF
+:10ACD000730E06D079F1D80DCBB45CEBD51B57CEF3
+:10ACE000B7EE826A5F3257BCA556D0AD24AECFF71F
+:10ACF000F1E983E9B0478B6A81EEFFD2197DD0F686
+:10AD0000AD805E4ABADFD858528971A15B6F540D8D
+:10AD10007C7F5F65AFB510E72D41EF839823A3F4E7
+:10AD20009A781EBD223ECEE8769CF72EAE7894CE61
+:10AD3000C3DFFE54000275783FA9E7F7D938E9234D
+:10AD400067E96CEBAB7CF32BF4790BC397F3F780DB
+:10AD5000308833388F220B0CBA1FD9E8253BF4A872
+:10AD60001544DD0A467D2FD72BED2178308EF7CCA8
+:10AD7000F2F2A6F054C0FB6735A597EC754DAFA273
+:10AD8000725175A29BECF369DBF55CFAE153914AD1
+:10AD900097DF24E4895369C91B9AB89F56852939DE
+:10ADA000D6D9C12285DBD3AC29C573ADE1E5EDC9A8
+:10ADB000F2C79B42DFE8D97D32F107C92E468F707A
+:10ADC000C5A2B764C77D9C61EFF9622F3D3DE59355
+:10ADD000A5E73AA4A723BEA0D52735A49FC1EC249C
+:10ADE000B2FBEB019CF7A66FD22C7E0F8361F82C8F
+:10ADF000077ECB85DDA77CA0D079DBBB9676D0FE25
+:10AE0000632CEB03F37AD933E7BDD3078B785E78F5
+:10AE10005751624984F27281EE195E27E4C679F2D5
+:10AE2000CF8298871504A6E7908F16FBE0C11C74AB
+:10AE30002D8F703CA743E6E722B3F2CFF77129F7D5
+:10AE40007DA276FB83C20F50B81CE6F39D620ED044
+:10AE500079D2819B0AD3DF036C6EFBD02E57E25C64
+:10AE60004FF719D03E93EE7F4AA3DEDD145B4278A4
+:10AE7000BF0FF529DA56B55C4FFA53DC4F0C864408
+:10AE8000F7CA86C4BD1BF7A58E3C8B76CFD11A05B9
+:10AE90003D3E10AC485AA85F8BABFB2C09F56C69A2
+:10AEA0009AE2C74C8F598867E3AE4504B75FE96DF6
+:10AEB000417D99562084FA7C008D4966C73D127EFB
+:10AEC000A403F35DFCB5695064DCD70338EFF737B2
+:10AED000602FD9597EA687C96E52FA5A502EB5D71F
+:10AEE000EB14D739EDC63E70EEEFD8B8B7E2B81321
+:10AEF0004AD97846567F7AED8D7C7606D3B3222FD9
+:10AF0000674107EEDF6829B1F2C3E1ED1D686F7E8E
+:10AF10004B37BF4EFC93679FC1F8E29E48D9E8F9D2
+:10AF2000E2B9B09B2F06FD27C2EFBAAC4E087A30CB
+:10AF30002EFD0D83FBCABD7EC0F99F7BECBE3DF7A5
+:10AF4000307CC8A84FC972E9D9F324FBBE1CFDB000
+:10AF5000AC7CE581A92ACABD5F4D90F1EC30F25975
+:10AF600014F9E71DF0917FE81DD81F9DE180676708
+:10AF700084AF13E8F2BFD6E7F03F5EDEC3CBB6FC8A
+:10AF8000FBCA5DEEF29761C938B4BFBE7CBB1FD26D
+:10AF900012FEDE29F7BEF99108CF37FF0AA43A1056
+:10AFA000CF6BC5F9A46B1E9BAAA2FD74E50CBD1264
+:10AFB000E39F361CCF0A3DFD36E363C3210FAF0A82
+:10AFC000A755CC977A7DFB8CCF9C0DD84FBA6302E6
+:10AFD000FA0FC7404E3DFEA52E379C23CDC30BB7BD
+:10AFE0007DDE281F1CCA1629A71FECC588DB0F763B
+:10AFF000B2F7B31F45FB7856F6F7D7D9796627DB4A
+:10B00000EF9FF2F47B8D86175103AC527A1AA5AAF2
+:10B010006CDC2BE8B7CC8968FFED989FC1DC7547E5
+:10B02000BDAE02EB35FA86A937D27C5687EE8DA2EB
+:10B03000BFA84F8244AEFB77CA42C931D15943EF12
+:10B04000E101F1FB820EBD62DF63DFBF08FD7C0121
+:10B0500060FB7B7A2AC407E4FF91D05EEDC9989526
+:10B06000183F565CFC5184F11466F7AE12F6655138
+:10B070008DFBBBD71F747A94AFEB7AE823FB3FAA12
+:10B080008533329E6BAD73E73FDD59F44592BB2BA0
+:10B09000F7F9C9CE5C09C6ADF533691D921FECFA0C
+:10B0A00075A7539CF8FA32236EA15C83B8496D3DB5
+:10B0B0007CB7EA0309D20E3FC12AA55FC5F5B68A5F
+:10B0C000E90FE7FBEB62B2F1468EDFDF643FFDA0E4
+:10B0D00019E11AC4838F9FA7D559D931CF233D5287
+:10B0E000238FCB19C5170FB37FBF2EA6D238CBD66F
+:10B0F0004D29E6FE21B7DC7C57E8A99F3CFC2D9545
+:10B10000EEA3FAEEAB17201E563C2E83C6C67DF783
+:10B11000E10864487FA555D45F576D9773EA77CCF3
+:10B1200074A2BC94ADDC7F79D5B6407A316B7FD503
+:10B13000A3AF9F050CBE775BFBF74CC475F05DEECB
+:10B140005704ABEFAC8BD8FBAB14F8BFB9ECA9CF6D
+:10B1500047B9BD7DF847454DB8BEA52D3BBF48FD5D
+:10B16000F65EEA0F38E2734BA2FC7C2CABC7FDA065
+:10B17000DF91D25372C4EF6CBFFBE1EF481CBE1DE0
+:10B18000FE7410E1DB72BF9A6470ACDAF21EC993F0
+:10B19000055BBF17453CACDAE18ED3ADD8FA610749
+:10B1A000E6A1AC90A17F31F2B37C8CCA474DAD5F74
+:10B1B00026B9CFCF57AF2492B07A3FF8EDA2DFB0D7
+:10B1C000EF6FC7640832D1FBF6BE83EAE3584E86C0
+:10B1D00053B8C35DB5C32DF7566D799DF222741F28
+:10B1E000F4579C8DF9016EBEF6D667EB4745FB69B7
+:10B1F00055EFBAF7D0AE5CB5FD9D5FA3FC58E59165
+:10B200009F6FE37FCA87FAA9DBA29EFB69B61496FB
+:10B210003FB1E27B47EFB5D8B887B7FDEE5ECCB360
+:10B22000BFFAA3F7EFFD67B4179E0AEA28FF577D20
+:10B23000F7852838F8F11EB1FEDE9D045639ABF7CC
+:10B24000EE7F06D278A0F5DD277F3B19CFC9BDFB85
+:10B25000C81FC719ACFEF54F9E47F7F25FFFC30545
+:10B26000E387B3AB905FD301275C69A2ABB143E244
+:10B27000C6CB13E2E9A1C7E1470654B477FF2041EA
+:10B280003FEAB995BD1FAAB83FD963423FE267F7CD
+:10B29000F6D7F77C9595DF61F409E4A00F9BFF4496
+:10B2A0001FE96F2626D973E5F6D71721BCABA09FFF
+:10B2B000F4E9107A3ECFE839334B4FEFF7A3704CE7
+:10B2C000C57DC1AA8719FDCE423A32FA9D35947EDA
+:10B2D000EFE07FE60EA5DFE351F7BD0947E1EAFBAA
+:10B2E000CA7163BA7D6CCE3C886C9C61F87B506CF3
+:10B2F0007930127EAF90385C5D51F3A728EF0F6F65
+:10B300002B1AA4EF62A4EFF78E4E46E3ED4D7FFFBC
+:10B3100017110FFD4F0674FCFD12573DF922ADB316
+:10B32000777FF89C6A505C07A2D26C5686C19FFD5D
+:10B33000C0CA2BB90F1CAE79E0FF2FFA356B7F0D19
+:10B34000EB02F7998C6E54DEC3D61DD1217D61A32B
+:10B35000817A335D46F35E99E6EB61657AE7C578FD
+:10B360001F8517EFFE62FB3ED02C3DF1BE8395DBBF
+:10B370005F5D847C978F9EF6FC759CFF1CF6FD013B
+:10B38000F77AF5D65FC9D627E9292F7DD33B7F8190
+:10B39000CF77EF0F28783EE35D71AFAE97EE59FCA3
+:10B3A0008B73F3A38C431DF7F0C7601C4AE0293F61
+:10B3B0007FF0753ED2FC468BBF77A2868B8F6C3CAC
+:10B3C0001E3E965BFE4F2CE6726325F434A2E9EC38
+:10B3D000B55714485A132BB3F01E46FB82C17BF8B5
+:10B3E000BB32F9853A7A77931CF7CA8B9590FBF7B5
+:10B3F0006FD516737B71E58E9D67A15C3BBCEB47F7
+:10B40000C49F2B1F7E55C57DC79E2D3F50FB6AB341
+:10B41000EB01F543DA81EFC3DFDF79169707B9FD5A
+:10B420005E73C57C563DE1EE7FD5C3EFB9FA5F612F
+:10B43000F592BD30D2386F2BE6A538DFB7F7F9E9C2
+:10B440001EC2B77BE5C65C76F0E462BFCB0EEE7839
+:10B450006ED16FF03CECCCFD21BA7F717BAB39FE35
+:10B4600016B4DFF6FB457CD1FC1DDAA5DB9F0B9102
+:10B470009F67FBFECF503E90DDDF631E7CCE79DE02
+:10B480005A1061FDCDE94BCC948DA172A3EE00DB87
+:10B49000EF39F8E0FAE71AC7A3DCC7FDB181BF5F57
+:10B4A0004E89D3392C39BA88F2CC65DDA70773EA07
+:10B4B0006FDE9F3FCCF7937EC698CEFBDCCF3DF688
+:10B4C0001FB47FEF88FB72E2E13E817FFBF73FD93B
+:10B4D000EFD74B9C6FAC67793C24DFFADAD81C8B32
+:10B4E000573354DEDA5C17C7B8CFB5C5FCBE9EB182
+:10B4F0006F18129E2D99DB674CC7F917432FE0791F
+:10B50000FFDB9BF5B8333E5476D86CC17A67BF0930
+:10B5100071AC87E3E27E6DB4E35AC5FCDCF3907155
+:10B520006B7B092F858CAB9DC0B8B79E8271C327FA
+:10B53000806780CD058DEBCDB3F28EAF4EE379639E
+:10B54000DEF192B63E10F1055A7AC3F8DBFCA29FF9
+:10B55000A5C586EBF7958192A17BABB3791769A955
+:10B560007326C6EF06CF1B2734C77963F69DCE1B23
+:10B57000B7993C0F96B5A375D025FC1318CF5CE6A0
+:10B5800080F705219F0215A918DA5F9D79E211AFB6
+:10B59000083EEF8C346838999DFAF4E2BE61F48677
+:10B5A000B2E69B339CE792153D23B9E2C8E6EB7403
+:10B5B0007F56BEF6DEF8A20D7FE7CE7F82AAA9985D
+:10B5C000379B80D61C706E17EB07EB5562BD581287
+:10B5D0005A1CF5D4189FA75DEE147EA1576E7DA569
+:10B5E00093E2F679F0B443D0F30574CC97D1F64DDD
+:10B5F000C3F86F57C44772B22B98FB1EFBFF2CF6A3
+:10B60000B9E4A48AE71FC90FBB8FF68DC6B1974D69
+:10B61000BC1FE9D65A95FC6091FAFD543E6AFAC8FF
+:10B62000FACF871FFB3E83C1721EFF53BDCEE9BB1D
+:10B63000DBDC46F9B1D74D558DE1F22D426BA6C545
+:10B64000316F425B73761CCF6B876AF8EF61D8303D
+:10B650000FE26106DF863CFCF13F595ADE2D008087
+:10B66000000000001F8B080000000000000BED7DB3
+:10B670000B5C54D79DF0B93377EE3C813B30C0F082
+:10B68000BE8310D1623A28A2363E2E0F0D3E62468E
+:10B69000C4A809D6D13C4A2218B436A11B1B2E02DD
+:10B6A00082F8C2266BCDAE4D47A22D6DD31653DA6C
+:10B6B000358FF61B4C74ED635B626CE2F6D30613B8
+:10B6C00037AB59D365B7CDD6ED9736DFF9FFCFBD90
+:10B6D000CCBDC30C68DAF4B7FB7D4B7EC9C9B9E7B2
+:10B6E000F53FFFF37F9FC77C4AE4089949C8EE2DD8
+:10B6F000840C151342F8B08DB808D95762B2433A9A
+:10B70000284F4F1AA6E987F0B7606C6A6DFEDB1907
+:10B71000553322F9CEBC442E48FBD999F73819A6E7
+:10B72000A9F5831612A0EDAD3C91FB69EA96C960BC
+:10B730009287E6E55B7C561F4D5D24C3544ADB953A
+:10B74000DFC2EDF08DED7F30E711EF5BB45DBA4CF9
+:10B750003220ED2C17324C3A787ABED04402749CD9
+:10B760008E72612DC0690D7F9E480991F2274513A5
+:10B7700021A9F47B5D8F2CC3FC08C90824C03C4977
+:10B78000468DAE5E0F47D6F4178F1DFF10E087B6CB
+:10B79000DFAD96EF9BF3CEA17B29FCA22C95986997
+:10B7A00037FB06AF92FC69341FBE2A73302F0F9906
+:10B7B0006E2763FB817A3E5A2FD11B241B00CEECEF
+:10B7C0006112A4E327160D1398BF43229249C27E4B
+:10B7D00010FEA4D92344A1F592E60E7B9569BA7EAA
+:10B7E000FE608E09A719E649D7D1D15CEA2F48211E
+:10B7F000C4D63CDF5F40D725811F2222ED2741625E
+:10B80000F88F6EF7CF490C3F1A5E7ACA6F490AC6A5
+:10B81000E87F747D5BCEA4F1165DBEBC670DE0DFF2
+:10B82000E2092A30FFC4D90C2F5A79A2344C643A69
+:10B830006E2261F324A5443E4693845285C0387439
+:10B8400048593F9F07547A7C409D0FFCC969588F27
+:10B8500010FA29415E74D57C2BE479F256112BFF46
+:10B86000D0477041DFB2A979F3D87CBCF94C94EE93
+:10B870006A21E42DDD7C6DD974FE5ABFF4DF1E0B06
+:10B88000C900FC7E54BC09DE61A407EDFB3675FEE1
+:10B8900016CF30E2670CFE8A19FE9CC50C7FCE28BD
+:10B8A000FCED55DBEFFD2F86BF513C71A63540877F
+:10B8B000D178D4EA578CC2AD205DD276847C0AF26E
+:10B8C000816AE0DF1E3BCB1F12EFAC06FE00BE9A82
+:10B8D000805F08C9A44D7AB82E28CF1545ECDF7AD1
+:10B8E0001F9507FA7C50930F6C5C97CF5F4D283DF6
+:10B8F000139F891CA328ED9AAB7861BDBA9153229E
+:10B90000FDFFA33809EB774A8289FB244DCF2C4CED
+:10B9100007B9D966EBB1C17CBB2C3DD84F5B8E49D2
+:10B92000EC8D21DF4EABF335373B671C9D111F8F2C
+:10B9300066810463F1FDDBAA7C6B1B7CEA8C99D2E7
+:10B94000072F09929DC20B4CFFB6B6BEF9B43DE974
+:10B950001FF2F9609C441CC7A5C2E52A349156DF4A
+:10B96000C4701E57E98A6FB68F0B270F70C69033CD
+:10B970001A9CED00A7273E9CCE9C0AA453BED985F5
+:10B98000E30C8A125B0F4B936D239D9FAB35496A85
+:10B99000A5E92EBEA9AB0ED2210B5168150B91CF94
+:10B9A0005450B8F969D309A1FD745C9A659B04B43D
+:10B9B000DFDC43023A391F74042F89B43F5E0C92D6
+:10B9C00020859377293280F1AC4A07DABA91A264D4
+:10B9D00042E6D0F182FC0C90A7CEA080A9D68F467B
+:10B9E000274E8B4CC462E8C7248740DF416773222F
+:10B9F000F5E6BB19DEDAE6860354F691EE129EEC0C
+:10BA0000A09FDA8B28BD24D1BC45EEAAA3F8E87E1E
+:10BA1000D5427A757CA08D9BEB66FAC74E6A93C2BD
+:10BA2000D0B7F9B037388E3EB603DE68BBE60BBE42
+:10BA3000EFBCA2E115FE15133CEF38917633809FE1
+:10BA4000DF27C5AB4DA6F8FDFCAE45FACE2B3A7903
+:10BA5000D54C98FE20444A5F312D7EBBDD2D6446D7
+:10BA6000416124BF870F213EBB5DBD5DF9749E8A95
+:10BA7000DFE42FA4EB45B24B0D788A4E096965725D
+:10BA800070CCBAAE96C2B47D779189B702BD1690DC
+:10BA90009019F092ED41BED4D635E8607463F13070
+:10BAA000396976C998DA008F20EFCC7BBCE3C96B8B
+:10BAB0001BF0490C3C16B9291E3FF1DF0F8F1E37D2
+:10BAC000C1D499509304F8232FEF22D23400C3C875
+:10BAD0007F5A3B8DDEA3E75FFDDF7CFE1A9DC4AF7E
+:10BAE000AF68F6103F48AB660549A89BC37CC0967B
+:10BAF000864D29E854A5D8C2ADA09A72EAFA334E11
+:10BB000011D0CFEDE23B36145DFE0F53C6EB9F27FD
+:10BB1000EF68F83447C6D3E3C7047AE78C25748C02
+:10BB20008BE02941FCB47790DC089E9A6C208F3A18
+:10BB30005D5BCFF84A2378EACC7E4EDCA0A3F72BDE
+:10BB40006285E2A6F8D809766D0C7972AFBBA21DAA
+:10BB5000CA05536C797E48956B5480F30BE9380B1A
+:10BB6000468C789AA7E2697EFA3B8FC134A994E4A7
+:10BB70000915C815017F15E0AD6A4D00C882085946
+:10BB80001F7C2288F45025025E3865B2E943E78DB8
+:10BB9000E32F1EBE5C1C09C482FB19B1E6881BF4AE
+:10BBA0004931C59BCEFEA08421A27CD4D6C5E5999F
+:10BBB00080AED8BABD7C31DDA4D0AA9D5E5308FC0E
+:10BBC000190B69EA02BC93736602765A5A3803CBA2
+:10BBD000ADDEFC10E8BBB4B09DC8E82788213BADC2
+:10BBE0007F70ED5D7ED443D76F23614A3728CB4009
+:10BBF0008E65CB61B0A779512A374B30CEA336F092
+:10BC00006F3ABD354984D9DB24961ED8E20EFE007A
+:10BC1000D68DBF3E1FFB33D998DCBBD1F97C69655B
+:10BC200022013BC07E810B812E3BB0727ED77029F2
+:10BC3000C8CD841E2B4DDB78250C7A4CB96097005B
+:10BC4000DF5B0B95DB4D342DFF95BD88A7DFBB383F
+:10BC5000871FF0D05548979CF6F3BBA79C2142F371
+:10BC60003B572E1F49827E8E9A25287FF2C3A64F0E
+:10BC7000823D65FB603FFA8736D53F247CD32C5844
+:10BC80003FFB479413BBF91EA4FF5D05D36D7AF902
+:10BC90009EEA080E035EB4BCDD4BE5DB0CA4A7B73F
+:10BCA00086293D99148E7C48E9D3E6DAE63D25C124
+:10BCB0007CE9778D3E7C917A11BE35E63D14D760E4
+:10BCC0006712726431D8919D206FD06E250A07EB00
+:10BCD00096C1CADF3FB06231D8A19D76AD7CE562E6
+:10BCE000599F57FE7006F3AADDEB4FF6EC82FA9EE1
+:10BCF0002CD2C4F01320AB74F64C41328FEBD6E754
+:10BD0000967FEFD6D9CD1A5D761530BA7CF9626789
+:10BD100035C8CD4E4A975609E87097C14FD6528D17
+:10BD20000E3B0B189DC5C3BBE57A0909EBEC408BB4
+:10BD3000A707E9D1E609A01D1D5D7F450AB363345D
+:10BD4000FAB77909F2834D0A3E753FF287CB0FECC3
+:10BD5000672D68221CA5138BC8FCE189E6110F3EF4
+:10BD60008DFE3B0BF215A0D7F745E227E3D4B75C75
+:10BD70002FC5F96C71CB93927578F4E451BCC798D8
+:10BD8000CF5792D97C3A027581FB69BF72BDA4205E
+:10BD9000DF7889BF1BF412257FB03BA9BDF9C9E448
+:10BDA000543D9E983DA2F5AF704D8316E0730F6D24
+:10BDB00047BFB6939714587A8B2764E0EF2FA604F9
+:10BDC00067EBFBE145E61F2E34BB4CE423E0673F05
+:10BDD000F5CBC293A99FD82262BAA7C58B69578BAE
+:10BDE0008469778B4CC256EAFE90EBE7EF053BDBAC
+:10BDF000E540F826A28B8E163FB66F6F99CDFAE11B
+:10BE0000343A9FBA0BE8C261D2F8C4BF0BE83CC910
+:10BE1000AC959761BE8763E58F242F58AC14E37C03
+:10BE200050EE754D30AE395486EB77F3FDABF25BD7
+:10BE3000C5DFFE798F54E703FDBD6126FA38C618C9
+:10BE40007A09B3F16EB4FFAE6C13CAD3FDF3769EDC
+:10BE5000F1D1BCE575DAFF78F4D8C3FA8FDB9F0621
+:10BE6000EFE02E84D74AD7DB4EFBB38A4CDEC7E324
+:10BE700087E8F9D294207F7808CAE9FD836BC9CBA3
+:10BE8000C09F7458BB087C1A9021DE25B4531CFB5C
+:10BE900041DF06C2CF80BEB571E418CD0B2ADF505A
+:10BEA000B5AFBC4CFB11641BE9A6ED06E7DD45A070
+:10BEB0005DE72B360A13A5D3947CB417EC85B5A4A3
+:10BEC0008DD6DB596D2766FA3D69FE1A02FDEDFC41
+:10BED000991DFBF79D9982FCBA4B647C34A11CF23E
+:10BEE0009A4858AFC76D8E483E1FE4E57D24300D5B
+:10BEF000F9FA693D5F533DD90BFC24902A8570A067
+:10BF0000871FF0333B4451E569E05832DA81016C18
+:10BF10001FB10B9B8808FC7ACE1CEA06BFC4DC80EC
+:10BF200046DF22F361DB30F2B5BC3CA38C10170373
+:10BF300081ECF287492EE025C34C6D31204B818482
+:10BF4000A9DEE8A1FF007CFC85AB17C8AD84A4AFD7
+:10BF5000110CF3E02F382F996E05F8587D4D0FF135
+:10BF6000171A1BA13E4F74F5D19FA94B1ACF2F8CE6
+:10BF7000B6E30793557FD0497240EFB5B79C206F69
+:10BF80005B22FDF05171252DD5ECF9875358DC6209
+:10BF9000949E2446DF2F503F1DE8B1E31766D21B65
+:10BFA00083BEAF27FB0CF66E46D014991FFDF795A4
+:10BFB0008BD68A8306FA1C7FFDB3EA8DED739A1C3B
+:10BFC000063CE635271BF23E25D3507F5257BEA1D3
+:10BFD000BCB067AAA17CF2A1E986FC94D0A70CF5BD
+:10BFE0003FD15761C84FEB5F62A8FFC91335867C0C
+:10BFF00049F86E43FD1967361ACA670E3D64289FDB
+:10C00000757EAB213F67F8AF0CF5BD41F1E409E067
+:10C010004F4A8F668AAF5D19CA21D09FC36DD48EF7
+:10C020009BCFEC63D0B7249BA8F631554C694057A1
+:10C03000ECAF1DF400C8F93D8F85BF807AD2E407CC
+:10C04000FEE50B16C91BA15DBB68225E9D1C911607
+:10C0500011F85EB1C78DDFE5D256E40F81AA0D7BE2
+:10C0600022E86DE37A10F376D20FF0BDC1E0E3452C
+:10C0700025A67C12B28DF46F25F72405C6B1FB2CE2
+:10C0800092B1FECDD2BF2F45A5FF1C4AFFE689DB4A
+:10C090006B74FF90499E9CC2FCC3AA731E83DF830E
+:10C0A000781DF57B6CA41DD8A9BC6E24EB14ABAE37
+:10C0B000FA3756D3879FB871FF269ABF684A714EE8
+:10C0C000D7C9CBE4B566DF8FD587330CF65974DA60
+:10C0D00096F810CA3B2A17CB530C72315005F31354
+:10C0E0007819E5A2F6DDD73715E57297C8EC944EBE
+:10C0F00089F2E538F88A96CB5F4E9698BF18473E8E
+:10C100000B54CE82C2DDB9F2D35D8037791B41BDBD
+:10C11000447510CAD9E8FEA95D7537C2E965F4A473
+:10C12000F9439ABF65A3F203FC2B9B44105F568A28
+:10C130002F27DA478FA27D49E721817D64F550FBE7
+:10C1400013F43DB53F99BDF9E7B52FF361DE7AFBF6
+:10C150004FD5972187DC94921ABFFF17E3EC479DD8
+:10C1600049D6FCEEFF9EF427A718F1A1D1A146679E
+:10C1700056203A3ADEFB125B77DA2291D3F62F246F
+:10C18000F84F10E9E5D4ECB34A25AC5BD0255BA9A8
+:10C190005EDD37BB06DB0993780272266178C33215
+:10C1A000D093A494C90985FE03F4E62836CA0D5B32
+:10C1B000941E15401F278ED5BB9A7CD0FCF389E4D2
+:10C1C000CBB752D438D92C324B2F5FE2F9E19A7CAD
+:10C1D000D1F0B0E0831611ED8E0F68B9664FD07EB6
+:10C1E0002C397C00E2CC829FC84762F0DFCBAA5E8C
+:10C1F000EE3B6997812E5D6B04F4B332FDE172C8AA
+:10C200006736113FE067F670980469FF3FF4B0F5B8
+:10C21000C8F48738B0CF332F873880F3A085C58521
+:10C2200032B785387DDCE89AEAC7FDEEE2A37E5896
+:10C23000F78A3C17F2E9671713A48F21EFC69E72A5
+:10C24000D857984BFCC03F2E0F4F32217FDE1A4249
+:10C2500079E21F51A8AF4392E944614DAFB490E930
+:10C26000F751FFFDDD161BA6D75A444C2BF38A0766
+:10C2700017D07A5B7D0E8C1774E43B709CCE5C010A
+:10C28000C7F98F9C87F2C02EF8758B17EB773DDED0
+:10C290005404F184CE93FF8971CD083D53AC7901EC
+:10C2A0009E30EEF710BEC90BFBBE49F20CDC27ED49
+:10C2B000B404FF7103C413D70AFE6331F837E9E50C
+:10C2C0001FA19F0CF8013CB4DB195EACCE26BF1B4E
+:10C2D000E2FD93C8FA15B1F854C513A530B340E98F
+:10C2E0003789910611E686DA1241AFFA493F059B7C
+:10C2F000583A421CEC8790074509E245D9B6D02050
+:10C300009467D78BFE36AC4F705F415B278B9D04E3
+:10C310008EBBA05E98DB42BFBFE811D9FA0D8570D5
+:10C32000DFFD37176E1FCC21F1F97B4F4BF5D92A72
+:10C330005D3CD64562EF0BFFCB6D15160FEDF77622
+:10C34000806D26ACF7AC71F5E38DF67BBB8753E3CC
+:10C350001393D3C15E6EE663DB996691AD0FC47F24
+:10C36000C08FDE5A28A5BB5DFA7E183ECC279FC73A
+:10C37000F57116B3F9B77DEF8DCD8F513AF977DAB4
+:10C3800010E255AF5CFC0CFA8FEF254BFBC1EF526E
+:10C390007E6C26B0CEEF7D7FD669589431F36E392E
+:10C3A00093CCEBE249EF7DFBD5320BEDFFBDE75EB1
+:10C3B0002DE3510885101F5A79E387AF9541FC4A58
+:10C3C00068FE4DE6650AAF52418A9A204F0D68E635
+:10C3D000876E591A1E076F07D31ED802F1C2509BF1
+:10C3E0004BE4A8BDF625E71F05A0C766809FA60FF2
+:10C3F000DB4676727489B9F4779754D1FEB6728AA7
+:10C40000E2E2006F8A15FC0A72C1EA07BAD95AC87B
+:10C41000F4E5D607C59002722CDCC4C8DDF65AE6F6
+:10C42000652A87ED3F0DC11900D2CE052A13207E63
+:10C43000378D20BDDF76AD290FF695DD44C8073A6C
+:10C44000B498CCD8CFC84567A817E56FD32C9043D4
+:10C45000AD171F9D0CEBF57B55BE6871B73453D3F8
+:10C46000813A1FC4DDFC1877DBCDF7639C3EDE7C90
+:10C470009D5EB6AFC0571235DEF5DBEE7076841EDA
+:10C4800034FE8A6EB7B785F861BC975A6C98BED0F7
+:10C4900022627AA2C58BE9F75B244C075A8A30EDF9
+:10C4A0006BF1FB0B2C00E76C4C3B2C647D40476729
+:10C4B0005FF0B0FDC87B92CABF0074FE24EDF73276
+:10C4C0006DF745DAFE32AD3FAF366C86B8CCBC11A5
+:10C4D0002A2F2528EFC2EFFB697F506F6CB9AD049E
+:10C4E000CA4BABFBC380C7D262FA9D407F7D587FA9
+:10C4F0007FCB093F2B1FAAB450FC96FE96953BE7D5
+:10C50000D27E68DEA9F643C72F61F567637F745C4E
+:10C51000CCC7E8B784C173A224163CD1F5A9956FA6
+:10C5200026548F88F0BFE0EF59240EF75138123EA1
+:10C5300006F2F882B51CF4E79E12926FA2FACD9231
+:10C540005AC041FEA966229A4BA8CACBA8D9554E1B
+:10C55000A09D8CDF95557CE8980FF513F6ABE9A705
+:10C56000E4EA30EA9D243FC937BB69CAD381A753A7
+:10C5700054DF4722E70D503EB13CAE076D2756937E
+:10C58000C8790332717DAA5FA2CA63D3DB474D210C
+:10C590003EA63FF771701EB1835F4B7DFD7E924BCF
+:10C5A000F3AA7DF645B5DEFE7965491B21BFF8810A
+:10C5B000A7200EFE1BE2E5603F7EB47D943D77B878
+:10C5C000E54C5A55A1AA1440DE6F138FE8EDDC6CE0
+:10C5D00085D2AB8E0F7A9AF8EA5E8C2F04336A7498
+:10C5E000FAADC312CCA0CC4BAE3FF18F8B413E8055
+:10C5F000BE06393D7784E9F751BDFE5B261F357BCA
+:10C600004250D76B9FBCB12D01F7D3A83E92C0AE6C
+:10C6100008920ADA3EB17CEBCBF09D9418BF270854
+:10C620008C8F32BD210EF2999EC04F3CB0DF907CC2
+:10C63000487E86CEF7B7035609E8AFEFE4DA7A888A
+:10C640001B3E4C12253BED27F3A54B02C0D1611ACE
+:10C65000168008473CCD4B786A0775089A9CA486DB
+:10C660000F5DFF8E34552E90DF7757D1FA074DC1FD
+:10C67000AB54578ED63FE8086E813CFD936D54AFA6
+:10C68000EF1D8DA36FEB96294DEC55E3E6239ECF6E
+:10C69000762BD990A7F5DD2CDF4EDBEF750F794DAA
+:10C6A000349FC86DE93E930379ADFE966E85B6BFA3
+:10C6B000EA61E700882BE803B9379A17693E41978A
+:10C6C000E7599ED858DA77F23F05D0431D6923A772
+:10C6D000B3009F3FE4FA41BE36BEFCF541C86FAEE1
+:10C6E0002712C4E7324F1CC175F8AAB97C04F0D6F2
+:10C6F000D7724644431DFEB475A176EA142FC17863
+:10C70000B210E242F960BF15F798D07EDB4E49B017
+:10C7100004F0DD9506EB5C91C6FC812921DA8F8E51
+:10C720007FA650BEB34E0775651919D6FB5BC46F63
+:10C73000027811E5F01FE57F2F01FDD4375B714CC6
+:10C74000A5E36DDAC0FB5B25D03FA15601D6FF04FF
+:10C75000877AC2772663C73768FE5A7F4A2FF81B4D
+:10C76000961D8C3E37F9FAD3A6D3B4C3CEE86293B4
+:10C770005BCDBB8DF976D59EF4BA157732FDBEF947
+:10C78000C4815C3000AF1E9B857EE4660D1E720086
+:10C79000E1B93A3827E9363ADFC69FB2B866E340D6
+:10C7A000C912987FE31E13013F6EF300A5271D7F7A
+:10C7B000ECA37C284FA6F3907BA6F2943E02070BD5
+:10C7C00096DAE9FA7E3D5F16015FF569B7EEB6517C
+:10C7D000E7E8EB823805E8A13EAD7437D0D3A6393F
+:10C7E0006F213D26A596FEA49AE2EBE8DDD54B40ED
+:10C7F000ACA599185F5282433967766F43FCFF6B93
+:10C800003919B1BA119DB8CF9907FF47E19B2CCADE
+:10C8100015505F5C465D22A053217012EC10A5C23A
+:10C820008671D20A711996E7AE21A66E0ACF112938
+:10C8300039B99536B517C826B053F2030E8C7F9AD6
+:10C8400013AA76803F7AEC1CCB47D6E912E2C55199
+:10C8500014EAB7D17E6E71F122F8226966D906EB2F
+:10C86000467979E85829F00BB303942F1663BCE797
+:10C870006022A97F8EB63B6ADAD8FD235AEF68B2F0
+:10C8800087805DD9C171EB6BF07BC5D4AD743D8EF3
+:10C89000AAEB6776FB4558AFA36E637E2FB7F141D5
+:10C8A000C0DB23A92F2E81F9A559E59E140ADFE7E5
+:10C8B000525FECF666209EF36DB4FC737FFD42B7C9
+:10C8C0008DE2FD68AB9C29EAF293FF40A536CEE3EA
+:10C8D00005E453DEFDC587808F69F98F6D54FF7EB7
+:10C8E0003D59B307587941BEC6D7D4AF9D4DE168D5
+:10C8F0001DCD2BB622D8F78AD4AFA27CFED5A7CD0A
+:10C9000044EB1FEC09C79C7E9BC38CF3200EB067E1
+:10C91000A6F168CF38DC6C5D1D53F2D14E3A6A67E0
+:10C92000F81AC93161F922F3B322C407AC53781362
+:10C930009EE5214D01D0CF7C364F58BCF7B03C4529
+:10C9400082B029DB1FE47A56A07F682FD2ED071250
+:10C95000F0638DFB877C54BED03A9C61A27AD87379
+:10C960006105974BFBFB6CAAEA2F7A4806C4631F4C
+:10C970004D6572E6D18072BB45021A1B66E75649C7
+:10C98000603AA4E9EB0AD2C73BBF32F65C4018ED2F
+:10C99000B23D2E938AB749BBC305D45E763D27824C
+:10C9A0001CA16A7EC761D06F1E1EE9A610F89FE623
+:10C9B000B7B9591CDED7B7E44BB3C13E7CB5D00440
+:10C9C000FCCF8B7E11CED99527942681DDC68FD2E0
+:10C9D000E9EB4BC240378373EE043F5000FEA59F46
+:10C9E0000FDBD9F9D0910CD20F7161DE2B13FD3E14
+:10C9F000A1C6BF3B5B6C98527FFE5DD01F5FEB22F0
+:10CA0000B84F2078039897DA09077CF1F2A7EEC6B1
+:10CA1000719FE10349EB40DE9E63763D900BC63982
+:10CA2000C24F7010E778DF16488279EF771BEDBFB1
+:10CA3000B23466C776A632F9D9D9C2E2A0C2F54FA0
+:10CA4000605CA7C3A2C923D7D2F05CB0E783788E1D
+:10CA5000D61ADC2683BCB21145117571725BB631F2
+:10CA6000DE255CBF95C58752D938D1E70D5C9CD6D1
+:10CA70007FC1EEF1FC032D8D3E9FD04C02288FC864
+:10CA8000103BF7B06D57657AB2AE9F6D9C9C2E8EB1
+:10CA9000431F0F5F379390EE9CCAC3FC8800F37965
+:10CAA000F8BA80DF897738B115F66528C175C33AC1
+:10CAB0003EFF5DD44B0ED213860373568853E8CEE7
+:10CAC00085122F3F324AFFF911FEC07D752E067F79
+:10CAD00048C67CF47EFAA3E03BD37F77387F2DC035
+:10CAE0003CDFAB242360871232BC08F8B7B1D28197
+:10CAF00071EA87498FCD06062EDF23EAE3C58D0351
+:10CB000097123794E23E960476F0C32F951BE254B9
+:10CB1000DAF9302DBFF9C4068C1F3E7CF49A30B58B
+:10CB200014C118B2507FACD1D673C69A1FA96FB783
+:10CB300004952CA0FF975AE52CFAE95B00279CABE3
+:10CB40006A9E340BFCBFDF8AF519802727AFEA8F76
+:10CB50003536D41FED76EAAF019D5E9C8CFA9416B3
+:10CB6000F3A09FB5F15778181D8EA8FE7C023533CF
+:10CB700001BF1D8EC01566B41399A7F64E47B24685
+:10CB800037CDDDA0FF0E0A11B908933DE860F9E446
+:10CB9000B4E6EE76A687B1FEC893FC6EB0873AEC99
+:10CBA0006ADE43307F50E8413F41F9BE5502380FFD
+:10CBB0003A027EF007951D5324D02755E92E9C8715
+:10CBC000E5EFACBD200F333DC1AB60B7100FB38FA5
+:10CBD000DE4BBD904B5C31FB19E16EA41FAFB11F62
+:10CBE000FB5C36FE7B9C39B0A334528FB60FE3B9A1
+:10CBF000807B6C18FFD1EA1FB618ED642D9D92C69C
+:10CC0000E20C204F80AFB5EF42F03EE45F2B69426B
+:10CC1000FEB57A8DFB451A3F0BD7A718E297DF4A7E
+:10CC2000F5E1FA687240B85E8CE59D2A9DEE847D40
+:10CC3000F471C7498E33CE0C9413F1C72953E5081C
+:10CC400051E3493C9E33D3F824BEBC30C671A3E502
+:10CC50009F966AF2EF884AC7FF600F2E4CA3FFFF32
+:10CC600050A87F91035B076F85F5F9A36AF716F566
+:10CC70001D3809E47745945B5353E13C957C1CD205
+:10CC80009BE59BFA3436DE5839C6E20FDB1E945022
+:10CC90003F3FC3FB1DFE1870D75F771AE4577EAA8B
+:10CCA00084FDD5F30ACAB1FAEB8958FED1FBB793DC
+:10CCB000D08CF1FA7761F968FFFDACFF973FF5E39F
+:10CCC00083B3A1FFE3169355E7CF6D3BBE301DE262
+:10CCD00095DBEC542E1BF95606BEE57D64D40F029D
+:10CCE0003EDFAFF945CAA2DD5573C16ED5F1F96CCF
+:10CCF000B0BF22ED79BACEFB1D5AFB3B77833D34A2
+:10CD0000A6BE33AA7EBED6FF6AEC3F1A1E4D8E40E9
+:10CD10001EEC2DFE0F560D3E9443074C51FD8DCA5F
+:10CD2000A520F6B7690EB33392FEBAFE270A0FF4B8
+:10CD3000172ACF023BEB4122C139E768BC27A9740F
+:10CD4000587F7D92615D23F8BEC5F0FD9F5BBC24DA
+:10CD5000A4E3B7CF04B72D027E4BD2D689283BB1CE
+:10CD6000DDE12C12D2F1DDFFC0F151E1B82D0E1C36
+:10CD7000F3FFC270F80C7C1981A3C0F0FDA3C2615F
+:10CD8000B65DCFBCACCB5B4492A5CF97846D599771
+:10CD90007576CB8C33A2213F73C86BA83FEBBC6484
+:10CDA000289F335C6428BFED8ADF909F3732DB50C9
+:10CDB0007FC175D9902F278B0DF52B6D2B0CF98525
+:10CDC000E25A43FD696A9CFC76EF0643BDC5D283F7
+:10CDD000867A4273CA77C07E59F0C1021BF8173BAE
+:10CDE0005DA6EA10C5CF4E3E684B8E211FCBD47E88
+:10CDF00047F59D370DDB2F149BDA411E2EA4AE7034
+:10CE00001BB5D7D2EB02EDA0F7AB45229AD16F0E3E
+:10CE1000B1F8C9072BABE0FB9D8B89D8ED8EE46F91
+:10CE2000FF2B42206FCD96F15C9BBDD884E7067640
+:10CE300017D78CBBFFB04FB5DFF744E9FB51FA3190
+:10CE4000B3F393D1DF8BD3195D1D58B08FC03E81F2
+:10CE5000CD15C27B3E8353767A21FFA505DFF6828E
+:10CE60009FD135E5112FD04F67CE570DE7F21C0546
+:10CE70006C7F26BADFBF55FB2DB8FEA80DF4E7EE98
+:10CE80006C86CFE87ADAF9F4DD361637FFB8E6B902
+:10CE9000F8639AE7E5746667EDB68530FEDF5DF40A
+:10CEA000F1C07FAF3ACE81058F1306EFE3780EB95C
+:10CEB0002B4790F47A564BE1DE28CCA7D3B7D30B9F
+:10CEC0007AB7CBF788C1FEB7C27C628C63F3323C81
+:10CED000ED163FDEF93CFE27CF6767CC7D775B9C84
+:10CEE00079156BF3F2AAF7283EA6793DF5179E5700
+:10CEF000581D2F359DD9A7BB25C64749E6C0CFF39E
+:10CF00007DF1F92F69B6F19C5282DFE807E417043E
+:10CF1000C63D7F745EC54F3C7E5D635152018ED726
+:10CF20005BD839DB7380479A9E0F4EAA80FB0AAF0D
+:10CF3000C3792D0EDAEF48186F1DD606CD063827B7
+:10CF4000920F25E9F9888FD56B8CED56059CC6F3B9
+:10CF500052EA39038AA7FD105FD6F036669DFF4C72
+:10CF6000788A476F378AA7EEA29BC3D344F49D9A71
+:10CF70002E21BD4C84278D8EE2F5F3FF2A1D2DBE98
+:10CF800071FC20FD7CDCF8F9AF463FF7A64B37C4B7
+:10CF900067FFBFE2E7F11BC4CFE8796B81D4C73AE2
+:10CFA00007D2E915900E27734D6717839FBDD88C64
+:10CFB000F1B3D70E1734927C7D3DA6075E5B36A990
+:10CFC00011CF8F553BF1ACD65953EC7E5F53F1F145
+:10CFD00090D7AD9EA7F3A782DD7BB67AE5B8F322A2
+:10CFE000CBCCC6F38BC411999F99F64BA40A8C9FA6
+:10CFF00051BC1E1B67DDB5758B37DE8DAEDBD9EA04
+:10D00000B69B5A376D3C8AA798EDEEF6E6DF10DF47
+:10D01000C309768637761EA0EF7166B7F701BE6941
+:10D02000BFBF84A20CB0FF09C6FD56AF493F02F056
+:10D03000BEE665F1F001416AC47741562EDB0DE78B
+:10D0400051CEAD727310D2D0E038A6AE67595D6C88
+:10D05000BBF339B53CD29E2393A5B1F58EA876CF0C
+:10D06000AA3A0EED07C2CB39FA773FFE21AA3CBAA5
+:10D07000FD4BDE442C3F17E73CE6B7D4F6AB6BC75D
+:10D080006F4FEA53F0DC1F21528EFE3EFA285DA955
+:10D090007CB0C21BFCBE97D67F9D0B7EF973104FF0
+:10D0A0009DE2C2F33D84273ED8F71FED8797F1BC80
+:10D0B000C6E54686F7E87E75FD85BDA9F1FB8B8741
+:10D0C0005F6D5EDA78A524807E1DA926E27E36BEDD
+:10D0D00019CE39DC59499A707C5E427852DEA4FE42
+:10D0E0009C2F421F174CD23ABC48A3F633F0FBCA20
+:10D0F000A5D0CFC05993B8C3171FEE78F2E09F5464
+:10D10000FAF198833BE05C0159CFC53CB7F72BAFF0
+:10D110001DEBEDF78EEED7E338B73C19B448B4DF1A
+:10D12000BBD4736784047356E8C6DFAFCE3BBA9DA9
+:10D13000C7CCF6C7C91B66C45F5FEF4339B1F8E7D8
+:10D1400035D55EDEEF2D32F8C7B5812D16B06B6B8D
+:10D1500097ADB0482E289718DDA970F409C19C122C
+:10D1600057044F71E58F8A9F81F3413CB7B1BE9957
+:10D17000C373C7C5DB19FDADDF3E686AA4E911952D
+:10D180000F57C03E93AE3F77069B5F5FAF2317E01C
+:10D19000EFD39FBFA0707CFA10C1B89D2DE3E93D8D
+:10D1A00010B71BE6881AE7332D87FD8661755FACE3
+:10D1B0009096B702BC55A9C8E7EBB7AF403FFF96C2
+:10D1C0006AE6E70F0804CF01BD392F2104EF1D10D7
+:10D1D0009B3CF828CDBFF58724D2ED8FD0C71342F2
+:10D1E000781AD0476A5BE073B1E2D35206E3F3DF0B
+:10D1F000BAD83E5E3CBC9C55E5A956AF86972CB18B
+:10D20000EAAFAC36CA350DFE146BF83D12239E3ED4
+:10D210004A8FA1F1F5DD2F5439FD5A94BF547B3E5E
+:10D22000B6DF3237433DA71BAAD884FA4AB14A7801
+:10D23000B65885C7A3AC467C7EB8948890BFD32AE5
+:10D240003D0DF0DD556B8E92C321EC67FD32A76179
+:10D250005E4FF4FE781ADC4BCA2F60F2F7FD2217FE
+:10D260009E137F80340970FEAB8E28F3912F896462
+:10D2700001FA3EA7E24F83EF1C91136682BC683629
+:10D28000C7E4AFBB543A3A17A85C85E7DFDBCD783B
+:10D290001EE1526DCA72887F2B018B1F8E375D6A2B
+:10D2A0005F9970BF6E5D35BDA7D935E78395E3EA19
+:10D2B000AF5501E37AF5093DB8FFA75490A66394F2
+:10D2C000CE267FF9F2DE59347F36642A61E7DCD856
+:10D2D0007CCF86B2B473F1844FA3EBAE165D350DEF
+:10D2E000637DE56FD8BCD6D58516C296D83D877AC2
+:10D2F000F6CDA2F9860CB7BAEF387F1EF0EBAF9AE5
+:10D30000C7B707A2E9E996271D867CD97922E07B79
+:10D3100014DB62EB87F7B29C6C5F87F7E7C23AAC2D
+:10D32000DB1EBB9E3BDB85F5AEFED15C1FCBEF3E2B
+:10D3300090C5D6637D3D17539E1FC84A60E50DB169
+:10D34000FB5F95E954E59D980BEBB23E0EBC2B328A
+:10D3500013118EB73B56AF83FDFB2B51F655452677
+:10D360008343CA64E72BAFF6BED09106F4B09313A3
+:10D37000E11CD95B6EFF14A0BF0DED97D0CF4F57C6
+:10D38000EB3BD2034F66D0F4EEF3CF9D82FA0375E8
+:10D39000C4CF49F1F5C0E10C4D0F68F7A2357DD837
+:10D3A00063077D04FF0BFBAB1404252919D65D79B7
+:10D3B00008CFC5F43A44760FCA3F536F577F43A551
+:10D3C000E7AB476F6EBDEFA937DA4567C1FEF3449F
+:10D3D000ECBFAB82B4B7948E7B95D25B2B9D0FF9DB
+:10D3E000E0895BF5FA46E38778E3DEA81D78F5E887
+:10D3F000CDD98113CDF36719BE1BB203DFAF7E62B7
+:10D400005FA904F3ECB93596BCD5E4F22F55B918F1
+:10D410004D2F5AFA4B55CE5F098D0FD7670E19E184
+:10D4200059D7648447E38F2BA13607BCAB45479F90
+:10D4300006EBACD9A5A46AE60DBD17120FCE5FAB03
+:10D4400074F2AB66338F72EF2887F1E95F353F9155
+:10D45000182B6E153DFFAB264A0F401F4FF3287F58
+:10D460000AEB379C4C9322F4F87F543CFCA974A837
+:10D47000C9574D9F44B7FFAF4A779A3E9B88EE3C11
+:10D4800071E28F07326C88BF0DBC28C0FED1810CC1
+:10D4900089E589B8C80BF6EB6C76EE9D4AA85C78F6
+:10D4A00057E26AAF03EF8329DDD650215DC72BBD5C
+:10D4B000B74DD1AFE3EC4CB61EEB1BDC3B61CBFAB6
+:10D4C0008AC9BF381DD6AF86BDEF71EE7CF2A2745B
+:10D4D000DAFE892113BC9045D66DDB6086F9CDCC90
+:10D4E000647A64FDF657D1EEBB59BA5EDF64D4E7C7
+:10D4F0005FCE10553DC1ECF03BA95D00E708E3E1CC
+:10D50000A13093E1E19EFAE3284FEFDDCEA13CBDCF
+:10D510002593E1E35E3E847299B433FB99D8283EAB
+:10D52000A85CBA0493007CFC35C7CE77F30141FFB9
+:10D53000FEC6FD7B562F043B309A3FBEA7E2E92B87
+:10D5400099EA3B84E9C13B33D13F0C70D0DF5B9F4C
+:10D5500067F0AEDFBE05CF275FCC50ED6B953F2F58
+:10D56000C23ACD8CCC2F459DDF05C7C836D0179465
+:10D570006F4C78BEE47533C275F5ABDF6C827AE22E
+:10D580005417DEF7423B96E6FB9627845A75F13A2C
+:10D59000CDAEC9F7337EA8E565835DD890E933D871
+:10D5A000E9D1F6C6FFE80396F6A878FA4BE983C3FB
+:10D5B000AA5DF0A7EA834754FE8FD60BA37CBC93E9
+:10D5C000F1F1A5F3FFBE10F2D17CFCADCC8FA69794
+:10D5D000A2F9F74AEFDD48D7CA1222161AFCA39C1B
+:10D5E00010F8C1A3F41FF1933838DFF644EF4FA6CB
+:10D5F000419CEBD2DED5EB628DFF4416B3B33626E9
+:10D600004A267C1FF2754667D17222BADD285FC4B4
+:10D61000892FD6D6CC41FFF05CCD6DB970EF2DDAF5
+:10D620003F18539F935357817FDCAAFAC7FBACF591
+:10D63000BD31E0F566317CE6178C9C027CBFDFC013
+:10D64000E17D62F8D3DBE9779FF7FF60581A0BEFB3
+:10D65000685EF34FB6B3F1A2C779575DB751FF4487
+:10D66000A1FE09C5F370AD3911CEB16AFEC9B0F2A1
+:10D67000E7F54FDE2423FF300BD6F9686CB81CEABF
+:10D68000FCAF08C17D73281C579798FD0AF08B8961
+:10D69000B6D3F925D1EDFEA8CEE7CDED37298FCE53
+:10D6A0001BE3C9F1F86D14AE3F91DFFA84911CE0E1
+:10D6B000FB378F7C70F15198CF1107BE3F16DDCF3D
+:10D6C000D7B2CCAA7FE0403ED0F4EF80D0B3F905CA
+:10D6D000DAEECD3B32FD3B888E2F08E50BFAFDC21A
+:10D6E0001F295FF851BE211FF7F53AEB63F9298333
+:10D6F000AA3F141DB7117BBFD1047EB14CFC167D2F
+:10D70000DCE90D75DD7FA1CAA5A22CA63FEFAA5DBD
+:10D710002140BCE8FED1781141E7429C9A7D04FC8F
+:10D72000CBD7D47B02CAC68498F1DE992A5E278AB9
+:10D730001FACA933FAF577D51AE5C73BA1FC513DDB
+:10D740005238CE7E9446BFF1C6BB51FDD117BAB94F
+:10D75000FD8089E6F7D9AC1BD31FAB48D33C8C7353
+:10D76000D0F581B496344D7B81C2F3CEA19509608A
+:10D7700047FD82906AB4E33FF8EC34BD5D1254F18A
+:10D78000FC7EED67EF00727943689A164BFF44C741
+:10D79000697E118A7D2EE32E55AEBEA1DDA7B82B82
+:10D7A000763C7F8B3AEE1B75E3F34D74DCA67699DD
+:10D7B00071DE4A16B387DEA86B7304995FCDC6FD90
+:10D7C0001B362EE82DBD5DAA64FD79F4E330C4EF6D
+:10D7D000619CED84403CA54F50A6EACF5DA5643323
+:10D7E0003CE4178DBF0FA5EDA768F5A2EDAC9F67D0
+:10D7F0004A867BB3B5CB8C70B569F62D11310E72AC
+:10D8000015F4A527A22FEFB4FA1F043A202E09CB56
+:10D810004FA878BFBBFEDF2C307F2A3F3BF01EDBDA
+:10D82000599308F2B3EC7CC8A2C7CB851BF4AB2E8E
+:10D83000A8F6C2447234BF6804E5DBFB2117DE8F13
+:10D8400078F30BBFB3C4EAB7F67A96E11CF1FA405D
+:10D85000ECB88A98258C8B6731CB88BFF5D773F1EC
+:10D860005C703CFBFF10C8AF99608F1EE9D0DBFFF6
+:10D870004F6549AAFDAFCA339ED9FDF1E2AF432AF5
+:10D880009D4D147FD5F4B3562F7AFDB5345A5F0EF3
+:10D89000ABFC1C5DEF52D68DD1DDA81D1387EEE2E7
+:10D8A0008DABF91F5ADC37BF98B68FB12F33661C8A
+:10D8B000B55EF4386F46ADCF183F224EDC2E299B63
+:10D8C000E13718276E9794CDE2766709D38B4AC863
+:10D8D000897AECCAD17BF781B9F7C0E2CF9D06F512
+:10D8E000D6A8C66BEAEA5F3D057EAAE65744ECF18E
+:10D8F000601BEC935DDDC1A1BD113D4EB45DDE0842
+:10D90000EF15822055E307456619E3D4E43176BE6E
+:10D91000DFD3BC1AED4B2D3EDD27047624D0EFB7C4
+:10D920006CFFB76DA05F353FFE2D8BFF411667661C
+:10D93000F6EE855E17DE73DD3AEAFFF931DE38CAAE
+:10D94000FF6AFC71A2F518953771D6632279132FFF
+:10D950002EA2A5A3FB2C8254F80A9C4BE512FDBD18
+:10D9600034AD11080F78A859CEA19F5923C84B3167
+:10D97000DEFCAAC90479DF72DF6E3807BFB2DA2293
+:10D98000DBA5C8FE4BE96B0D85AF807F41270C7E80
+:10D99000ECC02FA57F82FBC1AF2FB64BB03F727694
+:10D9A0009E34E8A1F9B3777022D83D558BEF374FFD
+:10D9B00083F15671F80E8DB399A8E7B56F5D5E5986
+:10D9C00040C8370044DDBD8F1A6D9F4659BB0FEE2E
+:10D9D000CD4E4D1D30B9284ABF7B78ED3E1B85AB3F
+:10D9E000A335E085FB78F76597EC83FB786969F2EE
+:10D9F000D0026A471DCC9EB11CF2037FA3F557BA33
+:10DA00000FEEDFBD680AFA385AFE83EC65CB79D891
+:10DA10008F98A48DBF1ECBEF5AF2E0B16DB4FFB763
+:10DA20000F6F590E67D7CBEAB4F11F595EC953FA8D
+:10DA30009FABE51F4B84BCC74922FB4CB309B144E3
+:10DA4000EEF7E179F781D1FB7C2DCBE1FCF8EBE53A
+:10DA50004D95708FB3ECCB1DFB8AA710326B59B973
+:10DA600028D3FCDC9C2F2F77C2FE31A1F448F3723F
+:10DA7000CE57107E8FD9A4F61FDA2767033CCA540D
+:10DA800028E79467F655BBE13EC2F06920CB879B3F
+:10DA90007B6C69867B098A0CA68970A23C9C85E018
+:10DAA000A8FBDAD9E169ECBE9D9A2F62718AD1BCDC
+:10DAB00097E50776C4BE7FF2610E935F038ED8E5CB
+:10DAC0003D2ADF6BFBAF49E789FC6C0CFEFF3CC4D1
+:10DAD000FD6746F8E914C4433CF8E45C532BECC3FF
+:10DAE000DA189CF1F671F7A9E314B426E13B45CBB3
+:10DAF0009A9CF8AECE243F9337948BF89520FFCDB7
+:10DB0000268433D5CCE17B26690E123C4ED3D41447
+:10DB1000F6BEC9328A6A787764E1A4C0513CDF9BC3
+:10DB20009E51D206E7EB5A7FCE831DA6B51F0BA7E9
+:10DB3000B805E04C35D7946C29D6E1AF98C14DD7E4
+:10DB40005D6D277F13DE7B19189A9A0F767565B67F
+:10DB50006488CB940DD558E05CEAE51C554E48AC82
+:10DB60007D6A25932B235BD4F72A6CFE12435C5FFE
+:10DB70009D7F65E7B22F41BD86210B817388DB8EC7
+:10DB800097E33BFDF1F8BF01CEBBEBF476031FC674
+:10DB900073E60D70DE7D06F4F75301CE37423FE0A9
+:10DBA0001FC0BD0EB09B52DB62AFB716576EB8EE0A
+:10DBB00026CA0CFD7786AF48FF1E2C9F685E91FE3B
+:10DBC0008CF7F8C6F6A7DEE7D3F0CEAB781762C3C2
+:10DBD000F9AA469714DF261D3DAD52E98B4A3F7CDA
+:10DBE000D7F7C2F2E25EFD7B0584EC60E73A78BAD3
+:10DBF0008E604F0E39F07DE0329EC9C7B2A16451EC
+:10DC0000E1C6D285B6AE03C94DF83ED1C80A2EE6AC
+:10DC1000EF0F9CD7E052EDA7F4BAA079830E3E8DAA
+:10DC2000FE23FD0F7D41E38F75C8B77B197C606FC4
+:10DC3000C03CFCE169FA73201AFCB753D981E7496B
+:10DC4000DB54FCDFE10AF57211BC8DC57FD604EB15
+:10DC5000998BE5654327059867431C3EFD650E3BA0
+:10DC600027927E3E9C08E703966633FD35D03FC37E
+:10DC70007E1BF0C53213E124366FB033CB34F94A42
+:10DC8000DEFB590595AFE9A3792A5F2558875179BD
+:10DC90001BB6D922F57F9AF3DEF276AA3F3C567680
+:10DCA0001F8CDA8F36A2BB8768CD61F1DBD9C1D872
+:10DCB000FBD6C3390906B9F5547325799BCE6F6538
+:10DCC00036D3E7B387157C2749E3EB68B95498C38B
+:10DCD000D6D197C3ECF18F5F2E7113C8A515AA5C3E
+:10DCE00062E5C4136880F234937A2F4164EBBEF18D
+:10DCF00047330A210EB7D56B96E09EC34ACE9FF3F9
+:10DD00002D3A4EAD4DEA489022F4514B6C920BF0F7
+:10DD10004D47807BAF35CBEC98873FB03BFEBD874E
+:10DD200063F447A4A4DA71EC5A0D9EAD5E01C7DB23
+:10DD3000B8AB3029A887930F3C8BF13DA70AA72DDC
+:10DD40004A5FF1C67C5A5AB8D164D695BB98FEEAB0
+:10DD5000F6CAE539605FAAE79BA2EDA27BB23983E0
+:10DD60001CD6ECA2DF79199F50FE45FF319DFA8F3A
+:10DD700004EE7BF407F03C183C605488F775D9FB3F
+:10DD8000C66F1D2773C14FD2FAB92BA7D8D06FDD4C
+:10DD90006ABA489FA4CC69AB942FEBE4D919F57DFE
+:10DDA0007A4A0F33815F57E710633B73201BEE9570
+:10DDB0009374AB1FE4CD29217018D757246E58DF18
+:10DDC00085E62D87912ECCC4DD86E7A48E60FBEA24
+:10DDD000BA9152B4533F308741EFFC3C3703E339EB
+:10DDE000A94E46B7A7EC4DD88E275232CA1155EE30
+:10DDF000FD3C770ABE7FA1C9CFC87D16AD1F567EF8
+:10DE00008A5B910DEFC49E4A9D5CD2C619ED1DB090
+:10DE10007F22F6D2F3FB6EA7FC38ABBA3F4C61A66B
+:10DE200052E5A5E58FD2FA5B7298FE3BE50B0CC07C
+:10DE3000B8A7DC4404F8670F079F85FC62AF13DFC7
+:10DE400071D3D623CDC47E1F264DFDFD15E01348AA
+:10DE5000C55CC66F8773D93ABEA3E6D31263FF9E33
+:10DE6000CC7FA8F57AE0FE1FADD75D1EFBDEE81E75
+:10DE7000958F1B6D3DD570955E77CF13EF2DF38495
+:10DE8000DA55B4CADE1CD60FD56788AFCACE3AFCC5
+:10DE90003DB1F78756E1BBAEA3BFF301EF54D17597
+:10DEA0000F9395FB01EFC22FCC787EB3C3C2E8522B
+:10DEB000700745B88794E28CEDEF7E578527C5CC77
+:10DEC000DEEBD6EE2F58D4FBFCC7547B2CD15B8BFA
+:10DED000721DDE58937CF02EDB08DECFD5D631FAEA
+:10DEE0003CAE45BDC77FF3F643491CFBA1D4603F60
+:10DEF00068E346DB1117E13D6E5DBC7B9DF7DC42BC
+:10DF0000A2ABFF6932DC01FD7D7A5B96212E11CF39
+:10DF1000FEF8912A6FC15E5062C22518BE5FA47ED2
+:10DF2000A0A21FFF0A1B3F32AE9328BA71F7E6C8C2
+:10DF30003FCEC1F8CD5C11DFB1B0133C0F5BA6BE84
+:10DF40005F47F513BE5748F55235C86FCD2F02BE57
+:10DF5000179380AFCBCFE6A4EAF4A4DA2E5A1EDDE5
+:10DF6000A1DA0177A8FA26E9BC66373A248E8BE855
+:10DF70009DB17A8B53EDE868F918AD178C7635A50D
+:10DF80005B456F078CE11715AF374F1F93E2D0C782
+:10DF90002D7F11FBB26C6ED03C0DE4663547601FDF
+:10DFA00064569551DF3B7299DFE1C8751ACEE1D610
+:10DFB000D419EB25423DE0AB5CE70DF9297A7DC42D
+:10DFC0009941EEB1FE36ABF4E07BF7AC00EF372EB3
+:10DFD000C965F650499E9C9A4BD3237FA8EC83DFFA
+:10DFE000A11869E549AF07DAC97DC31E98974D04AA
+:10DFF0003FB57C6D55D1115A6EF9A905DF9D2427D7
+:10E0000062FBF7AE664EBE8FF273BE2AE71A3C6C17
+:10E010005E0D9EB05040E1C86C60F064F70F72BCBA
+:10E020004EEE65D7B37AC5B91683FEF1439EC2772B
+:10E030006BAE16BF0CB5C2EFA164D7CB3CE8BBCC2E
+:10E040007E8EA8EF6EE27BA9997ED6BFCB1FE2EE53
+:10E050002D8ECCBBCBB4A218F445579AD30FFAE25D
+:10E060007379C1329877C3857018D036EBC2100F20
+:10E0700076DFFE3C79167CD7E62799C54CD81F770A
+:10E080005E60F0F544D13F21BBD575E965F0B9027A
+:10E0900025004F5AA284EF10D1BF7CD0AB69C9AA2A
+:10E0A000DE482341782F88D8683DB0831CB49EFE9B
+:10E0B000DE260994C23E412875DA74D0730B1DFE2A
+:10E0C0009336D0AFD37DD3E15DA1170EC78EA7D70E
+:10E0D000AA7A87C27FA71EFE78FC31FADEBA5ACF31
+:10E0E00012C78FD6E8DE591DDB5EA59A00CBCBD7D1
+:10E0F0007AEE86F934B40BF81B5D1ADEF7E70536C5
+:10E10000E6A6C23A1DE1805F33FBCB91AE32159E8D
+:10E11000805DD1EEC80DC13BB2EDC99F4A07FCC777
+:10E1200083BBA1D92CDFA7E7E77601D7E348D4F971
+:10E1300035CDCF782C97E9A3D37981AD30FEE613A6
+:10E1400007F09CE083472F09E3BDEB73A378E3EA74
+:10E1500099FFD2B086BD9751BE96473ADCD42EE0E7
+:10E16000BBEA0DCF1E0FE37EF17682FBA00DFDC74B
+:10E170004FC33BAD590DF24CFDEF126435B077E360
+:10E18000D212467F1F5400BD9DD9BFA201E95A2477
+:10E1900022413A0AA2DD956D63F6A886DFD34238A4
+:10E1A00017E267A74DC4DF46CBAF59942289E6AF8B
+:10E1B000F91C7E787FE1EF8FBF213D067886B81885
+:10E1C000BC7B9017FC12E0A3BB959D27EF5E48ED4A
+:10E1D0001E5A6FA1936C85FCC2361701FEB8513CE4
+:10E1E000CC8AA28B59DB199FFC283751E55782EF67
+:10E1F000291DCF4D50EDA8601DDAAF741E9D731020
+:10E200002E9C87982B7F15E9564CC671331BC29CF8
+:10E21000FEFE899646E84A7E3637F566E0ECC77D15
+:10E22000C64DAA9C295F7B947B5B47072FE69A919A
+:10E230006E329F3DC2817F48CB5B177AB03EC607E6
+:10E24000339F657ED3265A7EBF41AE6CC0F97439C8
+:10E2500098FD48E5CA4980EB94690BBEEF776A3AAE
+:10E26000C17766EFB8103E8DE25985F794C0D6931A
+:10E27000A77868A5F99FE54A38FE6921781FACFBAD
+:10E28000E94C76BFBBCBB403DF3BD5F83E9A4F7F5A
+:10E2900096CBFCC9CC3547398827789CCC9ED4E0F6
+:10E2A000D3EA95E4559C05FCCEAA1E423C34AEE16F
+:10E2B000D97D0D159E8542A000FCB461B5BF93AB1E
+:10E2C000BF6D3E44E16B2CE6909E9FFCBB57912EA8
+:10E2D0001B7B38F6BB413DAF0AAB74FED5C1EFBD29
+:10E2E0008A7A65E9008B1F340E1CE7EF7581BE3911
+:10E2F00089F4D948E9CF5E0AEBC6ECD86B96702E4C
+:10E30000E8CB68FA745633B90831D742F60E1CEEE2
+:10E31000FF86D6DAD0EED7E4AFA8C209EF08827C38
+:10E32000FD8DCAEF5AFF117FD5EE07FAF6BD3BFD12
+:10E3300024BCEBD6E8E7FC701EF93F46F50993D7FD
+:10E340005222FC7660A4FF68FCE5E631F91A438F9F
+:10E350007C184B8F687AD6F77405BE97ACAD1FAFAB
+:10E36000E27D54BFE7B1FB578979BC0A8FEC853851
+:10E37000B644F9B9BB14DEF50B144B809F54A71FAC
+:10E38000E23B7FEF7E5DDAA0C3D76981F23BCD9F90
+:10E39000CE77203C942F92F274EBD750CC7E67EA74
+:10E3A000C9EFAE40BC36C0DA51BC3604EFBB0FF14A
+:10E3B000EC25E231902F4126BF1AD6DCC5DE05D709
+:10E3C000F4DF731CE2BF4171E13BD74BFB57207D6B
+:10E3D000128FDD5FC8A15CC375D6F84CCCD5F61D95
+:10E3E000D8BB43D4AF6F857889E6D727D605940488
+:10E3F000692C9FA6A87EFD4CD5AFB7CCB6FD59FDC4
+:10E40000FA4DCD3F41FFE721EF8F30D5F884FA8DEB
+:10E41000067EBA2D8FD92D929A56E431BEDC54DA9D
+:10E420008FF4BFE97213F28FAB9AC911D705A3FC21
+:10E43000D3E260D4836374E8EC5F04FB110BBFC2CA
+:10E44000892007E2C1FD19AEE967705E851C67E7A8
+:10E4500028167CF0F344FD3BA435798CBEAFF599CA
+:10E460004918F0CD3709E3D9BFF1FACB0957CDF9F7
+:10E4700027BA7EFFD29784E782AE3DBBF2F3905776
+:10E480008E26E139929C702DD2C535CF1C3FD081AC
+:10E49000A78DE1E95A7F25D2CFBBE99209DE096B4E
+:10E4A000ED7F623EFC5E74BD0AD7BBDF3537031ECD
+:10E4B000767CED3BF3E15DC94D212E05EE9B5DEBD6
+:10E4C000FBCA1F41EFD51F7D18CF7DB57DF37FA11E
+:10E4D000DD6D0A1D61DFFB9244A877F59903F30116
+:10E4E000BF6DFD6D58FEEE3347307FF26BDF311F9D
+:10E4F0002A8DD0F1BBDF3DF2C3DF433E9088F77237
+:10E500001A824F3E0E79529BC8EE5D055F11F4BF33
+:10E51000DF75F0F820F2A146174BFB39F5DD30012D
+:10E52000CF7968F4FB56457119F01DA550BF793EAF
+:10E53000CD7727D4C78A23EE51E7DB00B408E3AEDA
+:10E54000E142C0075D82D287F25CECCF0579EE2C08
+:10E550000E0BF02EE9EABAE3F3D9CF10B662F94A0E
+:10E560001B3B2F368DF20BBC1F457B3BFA21C4F7BA
+:10E57000BA1E5C07FD1D3613D19C118177B320A113
+:10E580007FB4B986F3530E231CD9762A15F6C79AA1
+:10E59000897AAE8BD5EBA2EEA52D19F510B1D3B4C7
+:10E5A0006C5BEC38E893792E953E19BF660EACC8CB
+:10E5B00006F9413C567FA12FD25FCEF9A66E78DED8
+:10E5C0003FB37E6811CC6349D18619300F0FC4FB6D
+:10E5D00040BF282EECBF11E293949FBEAACAC73455
+:10E5E0003180EF8CD8E4402AFC269B640DE0396E24
+:10E5F000697DC0D20A72861FC95D858AF09861FF65
+:10E60000F0A025983113FAEB52F5D351063F6D8FE8
+:10E61000FD4995B207DAD3FEB13F5B9DCCE36FBEF7
+:10E62000D9D83AFCEB0F6E3F668C9787C6F45FEA49
+:10E6300002FDA2ACC17593049CEFBB5015F1ADDC9B
+:10E64000AA8F6347C77B409EC17EEFE9BCF2C1BC85
+:10E65000D448AAC581A2F1CC4BB49CF65321C998E9
+:10E6600092BE1BBB77A6C9EDCD7B54BDFBE22594C2
+:10E670003B9B833CD3BBC1CBA877FFA545266F53FB
+:10E68000C3F2E0F39790BEEF3DC1F4EEE61325022E
+:10E69000D0B3F61EF2E68A6BA87F153341BADE2CA2
+:10E6A000F49FF642FFDDC44D2D7BB279FEF02D20A4
+:10E6B000FF7EFDBC7D0DB43F653221BD9DEAFDC4EA
+:10E6C00091364E0F1FF303B8FA10F2E366D52E28E9
+:10E6D0005F7BDF01F0C71AEBD9EF116C1E50F98B8D
+:10E6E000FA6380DFCD275E45FAD1EC5EDFD3354893
+:10E6F0006F6E4A6FF8BB095543081FFDF317D2D45C
+:10E700005DC5DEC55D52545206F47672F50F778210
+:10E71000DEDE5C4544E8FF608EFC3CBEFFFB3C87D0
+:10E72000EF511EB4F454C03DC9830B2511F8637337
+:10E73000B076543FE1F9EA60ED00F28F679D1FEC7F
+:10E7400087EED620DAD5DD194EB40B0E3EDF8AFAFD
+:10E7500073B3E4F0C3EF992C3DC16DC5F68A8B30DD
+:10E76000F839B4F397866EC3735B1A3E96560DE77D
+:10E770003279C1E0FEB565E8D330EF5F7FCF0A6F35
+:10E780007E8FD2DFFF05D640AE560080000000002D
+:10E790001F8B080000000000000BDD7D0B7854D5B6
+:10E7A000B5F03A73CE3C1226939327E1E9C90308EA
+:10E7B00098841308EF872704102BB583F2B2220E3A
+:10E7C000C823424846C48AD77E37830331526F6FCD
+:10E7D000AC2FEAA576A06AD12B106DAC51030DA821
+:10E7E00014ABB5D1528A16BDA3222F918CE083DEE3
+:10E7F000D2F2AFB5F639C9CC640262EDFFF9FFE998
+:10E800005737FBECF7DAEBBDD7DE9336D9BFF18E85
+:10E8100032802BD561BAAC03A42B6DBE3B3201D242
+:10E8200000F435986FB07B9D3A9647FE430A6DCE53
+:10E83000C5EFD3C0081501E4DF23192137408A262C
+:10E840000164516A335307C008C0BF0691AA811200
+:10E850006F31C027B5067C3800F84FCB0658CEFF85
+:10E860000058B1A8D5A1617F554F89FE329D46E978
+:10E870002D989EA3BFCB305F013778B13C4B966E8D
+:10E8800098C1A98D53ABDC4A8799F3C87D64E1BD7B
+:10E890005370FEDFA9043D0987E85D88DF310F7EF4
+:10E8A000080DC0F9F7AEF4F6D5A83C73A92E633E67
+:10E8B0002B03BE4FE591350ED82C75ED7724AD6B4B
+:10E8C00004D5F39649582FAB678A1EA4A1E4725B66
+:10E8D00012B52B95F4CD1AE5AF7E14084E59BD74D0
+:10E8E000EA072064C2C15B66C37A47B353F4F5F408
+:10E8F0003DF407E56A84C7244DB5CA4BA99DE601DE
+:10E90000585FDAD96E4ABE97FB9BD233490FE23C7F
+:10E91000A737044A204FC0C1EBEE8443684DF2DCB8
+:10E9200050143CC6131CB07D6830CC6D2C22F87B93
+:10E93000ABA89F6C9B9EB11E3715DC81926B526811
+:10E940009C20C36B00CD03D329B83E3FF59BEF5D00
+:10E95000C5F0C84AD113C163CF25021EBBE76C9333
+:10E960003760BDEA2229E4C4F9DDFFE28C525A6720
+:10E97000F54CB70E98AFF6290B695C08B8E031CCBE
+:10E98000836FD1BD53305F5DE9D5D76BBCEE455485
+:10E99000DE3733495F8FE50F3E2F1994AF0EB84332
+:10E9A0004998BFB259E04375F3D3CA8D98F620BC9D
+:10E9B0007353BB40C98CE2CEF900ACE1F9544F3A35
+:10E9C000D1FF656C1F9041972762DE111EA8E3FA04
+:10E9D000AB27860712BC4E3E9F3497DABF62B30561
+:10E9E000689C57365FBA292875EDE7A4DDDB44EB58
+:10E9F0003F89EB0F60F96F9FFF7388E8612DD28329
+:10EA00009C837BB4462BA7F2F55340A57DB1F66BF2
+:10EA10008F23504878B5272F99F183E6E945381FB1
+:10EA2000A77FF602B8F5126F8D8670AEB6B5D629FF
+:10EA3000D46E4B06C018CCBF70F7409FBB2B9CB167
+:10EA40003DEF8B4B01C65F57A847281885572E17F7
+:10EA5000D2DA304E036E4C7BAC16F089EFE74ECD28
+:10EA6000CDFDAC7085F7E0CE41CDEA065736E29198
+:10EA70002F59E3EF49F680D107E7E3682E6FED8366
+:10EA8000E5D9E9F81FDAB7CD3D42B46FD9D9E07BBB
+:10EA90002641BFAB4C3CB3F6A5211D182FB33DA2B8
+:10EAA000FECF4DBAF98949975BCC348A2E62F1DEEC
+:10EAB000EDCB253E919D0CBEC604E359ED717E5C05
+:10EAC0006ECD0B5CD84F26B5D36C8CDF717417CA32
+:10EAD0002A1E4674372559DFED227A1A963B2C08F8
+:10EAE0009DE320247267A474C5035A07D10FAD8B30
+:10EAF000E8ACBB7A0DBB047F8AC7CB674C3AA9222E
+:10EB00005CC7796F93901E13EEB3E8A7DE966B7B1C
+:10EB100010E7FBA3FD32F3D9F87A56BAAB16A0750D
+:10EB20001040DEC66B53BDC5DDD7DB66D6FB71ADCD
+:10EB30008B53B7AEAD51B0FFA12D5AA90C349E3600
+:10EB400089C60BE078B4CF2913E15319E1E319DD4D
+:10EB50005078672EE179E35C5AD750256C2B25BE9F
+:10EB6000EBB5416BA1E0DFE7F0FF3DE72643ABAB40
+:10EB700033DFCB971E93EF53D93BA67E3F7F5E4C8E
+:10EB8000F925AB87C494E70686C5E4F3EBC7C6D482
+:10EB90001FD03029263F68C37762EA0F0E5D1D93B0
+:10EBA000BF74CBF763EA17372E8C299FF48FFCDDF7
+:10EBB0003F253CA7F527E073561AD17279FF8636B8
+:10EBC000C7AE3F7574ECFA158800D1FBA4E4BFEA28
+:10EBD00089E8D94A5341F92C6CB5233EE0D26C0F39
+:10EBE000E23CCAFF2C87D627988785CF567E922293
+:10EBF000C78C6BF1890BE1579EEFFCF8F263C217EB
+:10EC0000E779E6FD0F39215DAAB9820F28E0E5F525
+:10EC1000A74E9C7BDEF5DBE3D70F1AE3BD87D69FBB
+:10EC200000EFE3D79F3A3A761FACF5E7F90637874E
+:10EC3000B19FCFE74A2C5FF651D198AEFDBD1BB70F
+:10EC4000CED9AB52599F01EF3509EB77CEE34E9EFB
+:10EC5000C7F54EF02782C374130E95B982DE2F4498
+:10EC60009FEF9BF3F81FA24F4CDD6B73991E619FC2
+:10EC70001C1A805D2DAC9776F544BC48F7B9592F26
+:10EC80005BA8B44269949CBFDFA4EF074DFADE5045
+:10EC9000AB723F0FD7E670BAB156E3EF8FD416725E
+:10ECA0001AAAD5F9FBE6DAD19C3E8AFA18A58FD7C5
+:10ECB0004EE3744BAD97EB3D593B97D3A76A7DFC70
+:10ECC000DDDA9FEBCDFD016F06CBB3F8F5CC5F9598
+:10ECD000182F412EE2F6F391CEE4F3F0B52EEDE5D8
+:10ECE00079A9E7C3A3D50773B7BF1C8507D7E5A6E6
+:10ECF000641EEE81FF1805A3CEC9176EFF65ADB681
+:10ED0000FD65FB85E9C2C21738FBE18044F5AEA77B
+:10ED100031C722BFC9DDDC1070770F9F4E3C8AC31C
+:10ED2000572FE22B7E2D21D9DE8BCAC3BDA3C7F995
+:10ED300093B9CF567EE64C81AFF1FDDE6FE2DF2C5A
+:10ED4000C24F2C9F1D47AFA77385FC3C9D2BF4F44D
+:10ED5000FDDDF08B7B726DA6FC14FB3E6B9FE04BE0
+:10ED600077F6983FC197605C294F8BA1CFD9336369
+:10ED7000F771BF5DF0B7FD7F92436B12ECFF85DA50
+:10ED80005BEB896FF72773BD9FFE7F466FFBAF4D2F
+:10ED9000617D7EBFDDD72F2B6A7FF65FDB636EA2BE
+:10EDA0007DFFDF5CBBD8AF421548BE433A18A407CD
+:10EDB000E192020ED2E5A0403D4C7482C610D145CE
+:10EDC000F778A9C0618B9E64826712EBE39FCF4CFA
+:10EDD000E1FD079F6A4054FFA0A8AC976EFB2EEAA6
+:10EDE0000A349E82E3A11E0ABAAD73FFF2E8BFC9DE
+:10EDF0009DFC5AEE9EDE2E8407161F994D7CE43C46
+:10EE0000F2BA6BBB8BE32387888F5CFACDF3118B4F
+:10EE10008EE1EC8D03BC295DCB67111FE90DF0D3AA
+:10EE2000DCB7998F7C6D3859746BEA13F1FCA4DB65
+:10EE300076CD9917907F263F57FCF561C48BDBE4B4
+:10EE40009486F5D8E42EC5FF73CA07020A3C86A94A
+:10EE500073F5E9DE878673B7850AD71BC2F69D5323
+:10EE6000F1FF32CCF6A053A57A0FF5F8F7ED945FD9
+:10EE70008D1CD389E99749FD4380B640699EE03FE8
+:10EE8000B2EB4CEF4351F3B3ABD0273A5FDAEAEA87
+:10EE900073286ADF86EF5563F223DA7262EA8F3AEB
+:10EEA000A0C5948F0917C6948F3BAAC7E427444690
+:10EEB000C7D4BFEC8C11932F872B62EA57B866C476
+:10EEC000E4A7A8D7C6D4BF3C67414CF915DA4DB1C9
+:10EED000FD157887E7E1BA173ADCF5522ADA69B905
+:10EEE0004619E59393ABFD0BC84E5AE3516122D509
+:10EEF0000E85086E750E97BA1EF9D40792D11F10B1
+:10EF00004FEFB3A1D59D8FF5E530507AD0A697523B
+:10EF10009A676CF1119D6E2F4CD6681F920702B450
+:10EF2000919C52F424407EE2E811F95D01EDCB6F33
+:10EF30006CF01826DB5554F4A97E736688ECDFACC0
+:10EF400064DF15348FF5B606CF1ADA671B781FCB4E
+:10EF500064BCFAC968CC1F7E41B1119E6D6FB1DDF2
+:10EF60003316F39F61F7329637B59DF8C995981F10
+:10EF7000DA66D7A9F65090D94E5CAEC03D4A7AF712
+:10EF800078F6F10F843D15FFFD677982DF6755083C
+:10EF90003B33BEFC8E3C21DF3E76242E5F6EB6AF47
+:10EFA000B86BFA43C4D7EC6D7620BFC5AA2CA32753
+:10EFB0009C4F5F3D930FA1E15179C50BAA9BBE0FFA
+:10EFC000E4EF1577CD83B05BF4437EAC5549464FF3
+:10EFD000F23B7C3C29F13C6E31E7613FD3A39B7E41
+:10EFE0003DFCFDE3BCF3AFD37E2609421989DABBB1
+:10EFF000F97B563071FB7BCCF13F4E4F5C5EDFD12D
+:10F000007F2F086444B7137CA7739CBE5C6E3F934C
+:10F01000068184EBC8E4EF9063E410DEEC423A270B
+:10F020007E519E96ED0024F1F91079C540F8CF206D
+:10F030009300F1145C7A29F12950EC91B04517281E
+:10F040003F1680F201D90B3644C67338B51B56DB28
+:10F050003F0847D1D10C23360F543F4ADE7C427D16
+:10F06000E37A928714A612BE9F022D554D805F56FB
+:10F070003ACF257B95A8F51CEC464F6A33E178B072
+:10F080005762383E6FF2B191F320A1BED696E711D8
+:10F090007659A1DEF37C7283E0EBCB88EE377E1FDE
+:10F0A00032B9FCABC219F182E57AE4BBEE10FB2960
+:10F0B000BF71785BF8DD27062F3EC98F9F777F2EC3
+:10F0C0002FE8EB7D2B8FE58A3690E4629349BF4DA4
+:10F0D0008AD163989BF8185426827F9F7C534F8D6A
+:10F0E0005B771318390BC8AFA1D875E267C932F83E
+:10F0F0009F4E00FFF875A79AF3C6F6735BA93D789B
+:10F1000074C1E7C0EBCA463D9FFE854B280FBC6922
+:10F11000A7FEE7F93DFA7A54813ECF13FAF40208CC
+:10F12000DB890F77819F3BD34E7EDB78387A419B1A
+:10F130002FE55F189EE905C6E7041F9B4BCDDE8ACD
+:10F14000EB9C1FF000F9696E98079E629C8FEFBBE5
+:10F15000E96F185877E155434AD6527AE9F83A9957
+:10F160005B4F66BD4F0AF491CF5DFAD5F5BE3A8F7D
+:10F17000AF90E8E390A42D61384808079237BD8F1F
+:10F180000F5C1005C715FDCA7F9F9F45E7036064AC
+:10F1900090BF788793FD56B001580FADD9397813D9
+:10F1A000C9852FF27DAF51BD51934DFFAD11197837
+:10F1B00075CAC5C30BFFEC44271782976CD2FB417D
+:10F1C0004F62BC19972FF6EBABD24B66BE8043045F
+:10F1D000E1B0B9EC9BA717845F0CFF782D5FF05F5F
+:10F1E0002BB5E0366A5AAC7FF735731DAFE57B3837
+:10F1F000FD22DFCB706EEFF7E9E12492FF0E5C7F1A
+:10F2000002BCF7764337DDADBF3B7AF9A6F8F2C111
+:10F21000E4C4F35CFC2D99E71B344FE2F32589E746
+:10F22000F96F17894FB83F4B5CF9DFFC3CBFC8371B
+:10F23000DEC8A779A6279EE74F2F129EC8EC96B48A
+:10F2400062BDD9C807A9DE373D5F082C984272E835
+:10F250001A9FF0FF1723C7253E845379F4DC70D240
+:10F260006FF5751B88EFACF4E80195F9C81BF982BE
+:10F270000F8281F399394D627F52FB884F97288422
+:10F28000EFD9D09A46FC6AA793FDD9F1EB0F99EB21
+:10F29000473A799CE004D32303899F1C1C98984F1C
+:10F2A0003C1E5FBF3EC2F2697D7962FD749B49AF2F
+:10F2B0002B5C0DD3B26DD1E72BB84099B86CC0E888
+:10F2C00043F2B64C5D4BFCC4817289E0EAE833A49A
+:10F2D00027ED07E6BD12F981735E3F207918DE271E
+:10F2E0003AE097D739CEF1DABD6A81BD7B7EBE5C4C
+:10F2F0007E66A43FC17AB66ABE5DF95176E3F22D0F
+:10F30000AFAA05D1FE7108DB800547C4E6E5F341ED
+:10F31000D36FD0132ECA6F509C29E865453F2FCB81
+:10F3200007921B643FD7BD30A6943617F50F20FB1C
+:10F33000209292CCF222D87B6CA11605CF0FF32D30
+:10F34000FD53EE46AF74C47C7FB7D685266567FE55
+:10F35000FAA3FBA6903E3F1FC2EBA8FEFC553DE87A
+:10F3600008B2639D1DFD9D9162F4DBCEFE15FE5E2D
+:10F37000EE72B7CA433175FF2EE17E6CD58CA304C3
+:10F38000CFB5FD8C63B4CE78F805EE1A9FC67E0427
+:10F3900082DF655DF7BDBB7DFEAB669CA6FE5EE8C9
+:10F3A000A75A7E1D9DCFE392ADF361453DECEA8403
+:10F3B000F757DD9764D3BF88FAC4399AB701557EF1
+:10F3C0009ACF3C8BBEE3F41C2814FE803A4FDBBA84
+:10F3D0005D517478832D9225E476781D3999FE6706
+:10F3E0004712F38FF61DBFEDE7E3F3344BEFE8214F
+:10F3F0009FEBF1D5E767F917ECC989F569EB1C6359
+:10F40000B7BDA880F5123AE71D8D79495B44F6AA8D
+:10F41000A2821EC4F5955F8ED884FD4D92FBB68402
+:10F42000711D9FC3D9E40998FE2788F5AF7AF3A32D
+:10F4300074F2634E52ECC7A3F953BC1F684041AC51
+:10F440003FF914CC4B6D25B88C4F67B86C6F99940D
+:10F450004AFD943C3FB927A5BB6AEB55C5DEE90FD1
+:10F460008A9F7F793776E9B002A177BE9E6C0C2B1C
+:10F47000C0B4BC9BF58F32EB85938D5105599DFD32
+:10F4800051FD44F1106D832C3FAE80EB358105AC0E
+:10F490006FD95CC857897FA2FE2AABE4272CB03312
+:10F4A000BD1BA0A9D9EC3714FB8F7C5DC1FC0433D4
+:10F4B0002FD5BF1DA4761B6FF1F03938F83420F931
+:10F4C0008080E173813AC9CF7E0717C57D60BA5E3F
+:10F4D000D237902E26DB2219822E4222AE017C0AE0
+:10F4E000E57F2B85831427B0D6F5EF3F273FB81172
+:10F4F00054206922E615603F63E0600A9FCBF1CC9F
+:10F50000701E4E6B5E663EC5CCB7CF9A3A6D00A6B4
+:10F51000B7253FE2213C0D4BC847B19F2F93FFBD5C
+:10F5200095E9C69FACDB7B937FE93DCE4B2B937572
+:10F530002987FC4F9E42D2535743B2EEC4710C77D9
+:10F540007180C67568C0FEF86468E475B8DD9F0414
+:10F5500008282AA812DB4FC9BE65056CAF009F932F
+:10F560001F7E2F6533AD3F493DD57A077ECA0083A4
+:10F57000EB65C4C9C72CF72A89E337BC4A9C5CF405
+:10F580004904FF9E73E3BFC7CA4B171C54899F48A9
+:10F59000ADDE9C73C89FDA086E659D706B53845D09
+:10F5A00067C12D30C9FF4B826BE04EA71ACCECDE51
+:10F5B000DF86001A45FA789BBA642BD547C3096CDD
+:10F5C000D45F8E585FA0D229F641F16DA5F6EFD831
+:10F5D0007354B27B2C3C7B68A0C9AFBBF1773C5025
+:10F5E00020F4A3EAF4C3D524E70007B5F50738995A
+:10F5F000727424F10D9497F5242F93EC06C3DB92DB
+:10F600009B2B9AD600D15575F30220BEF28EE41BD7
+:10F61000F032DB23C076D99C6981576C1AF9B26647
+:10F62000AE7363FA49411EE3D7FE57A6BEC26C48CB
+:10F63000761753BBD2CBBC53B270DC6031E8776233
+:10F64000BD60926FEBB3B4AE3765FD318DE2212A18
+:10F65000E0C3E12632E1F74DB333D86F9A5911A9CF
+:10F66000A37881C8DDA0527C4F17FA388BEB1B09B9
+:10F67000F00B1E0BFB59A4B612FEF4427C93D4CEC1
+:10F68000F247A93C5FE42FC37C8DD852C86F29FF95
+:10F69000DE0882479B0C141655D322D968FCFC99CE
+:10F6A000C359AF29A0F2CCE8F2B4E54F61BE60EED9
+:10F6B000049DC849B3F97E762B95BF01BC0E30F985
+:10F6C000F7A838FA1DD749375C5EDA91F757D07C36
+:10F6D0005FB919D88EAD31E56D0CBDD162B1CC18D2
+:10F6E00049F8D7D10F503F15667E9CA2723F7DFD31
+:10F6F00060F205EFC607F89CC0A6937FB24E6A6021
+:10F70000F840C0CFFA1EC5CD10BDF49FB76BB79DB2
+:10F7100006CB1474A7EF157457065E99E03552BDF9
+:10F720003B48E3CF9997CB7C66CC5160B830E5611C
+:10F730007E429AC4FB943F209FF165BC4BAF97116A
+:10F740008F64B9343F09C79B3B4FE2F38959735D1E
+:10F750002109FF390BE983E3A1145FEE6CC4F7398B
+:10F760003E499CFB627E5E943F1EB5613E379BED39
+:10F7700004FFD309F0397F80C077AB7DCD5A478C29
+:10F780007FE792016EE1E71830F59302E6BF22AE03
+:10F79000252BD91B117CA381F9D4611BEADFA4FFBF
+:10F7A00082C1FAF63526BD5BFC6296710BDBC1B3F4
+:10F7B000BCB17AF43BB4274407D74AACE7CE997B77
+:10F7C0007E3DFB5C8164C6DDF455599E99DF35D0E2
+:10F7D000D89EBE9AF49C12FC380DF59028FD7EDE72
+:10F7E0006D67D3B87ECFC7579CBB0451A152F09729
+:10F7F0001A8427F1CBF26B15A697EAB50E8EFFAAF5
+:10F80000695E63CF267CFE21E8025FDFAFEB83F306
+:10F81000EC53658C90B528BF4D554822BACE269E34
+:10F82000C3F08F38C82F37DBA157D1BA66A7831A28
+:10F830004843BCBCF68A8DD4FF5A17A832CADBDE17
+:10F840002D6F8608AF9095EB849388391CD7D657D7
+:10F85000EDC1E70BF5B6611CB755EF49D1A3E3A4A1
+:10F86000D6AFE9C43B8AD7D29C304C35F737919D4F
+:10F87000346480E0570F4AC0F22270AD8BE19C9552
+:10F880002FE295B2527547308DF88D66D5E338BBBF
+:10F8900007EDBE5EC3310DA15A29F647B48BA7FB15
+:10F8A000AC0CB39F1E9A1444629CD9525A6623B87A
+:10F8B000B953748A4FB4FAAD4836ECC4B72A8648B7
+:10F8C00023820CCF4DCA22D24F9362F9BEDD2EF6B1
+:10F8D00005DE157C3F5E0EA21C60BE4F7EFB6019EC
+:10F8E000CBAF8A01592C0FB89FD58A4B75EAD0450A
+:10F8F0009E657A2185FC5CC31064A4AFB7E5786788
+:10F9000050FC5EE07585FD6A6573F5EB1647EDEB1F
+:10F91000E60E391099CFF1503FD4FB503CD4DAF2C7
+:10F92000CE3CC53D56428383F0BD324E3E2E73BF62
+:10F93000CC7AE4B247ED9DF80B1427AAE713FFA891
+:10F940007AAA8B3F88F954273F8BB32F417D89D604
+:10F950003302F931F121A3204566FF32CC13721432
+:10F960001E97C82F267B56D793DC6B97521AE4B2AA
+:10F970004E3E39C2DCAFBB14EF4B141F1B407DE978
+:10F980003115BACA01F0B3FE3211E526E9D152CBE6
+:10F990001C99C6DDB814FBA6F37C255C41F9DB9607
+:10F9A0008A735208DCCCE760E3024E95E8FFCBE4B3
+:10F9B000FE6BCD71FD7664D6C7D41F727F80FB428B
+:10F9C0007A8B44FC10CB7B4FC3A64807E35A8E705A
+:10F9D0007F1B33045DC4EB312FDBDC219B8DF86E84
+:10F9E00080E54E128472087E4681E0B36507049F6D
+:10F9F0007D2E801AB44CAAACFF9AE9B9AC0772F913
+:10FA0000D80870FCCC0EF0559BFACE5D034650B47E
+:10FA1000A85FF071535FB0F4B82971FB78B9FB7E31
+:10FA200085F8D6E5395DF64BA6FEA781C4FAE21546
+:10FA3000DAF9F99661F12588E54BB97096F70FEE82
+:10FA4000DE732BF90982717A50F022F5A05EB9BEFF
+:10FA50005FD0FAE2F5A1EEE2299F1A7071F194A845
+:10FA600041CC27F935D6B2B3E2F0A77ACFF1F9F756
+:10FA70004027DE75E07360D375B40E94E72AD97D14
+:10FA8000D26F1E62BA5E8BF5E4F104CD83C1FFC272
+:10FA90007CAB0DFC14AF003EF534E1A92577911342
+:10FAA000319ED42D1678374A11F9BEA8C8125E06C9
+:10FAB00047C7EBEBBE5CF2471B65C51C1F6BC9E378
+:10FAC000E13683F16404E81954CFC2939161518EF9
+:10FAD000F8F11AF19371D3105FF228CE76541FD249
+:10FAE000BBCA4163FC288F936B15EE990AD17985C7
+:10FAF0002B7EFF0D3E779C6CE2C714F5EBE1C7252A
+:10FB0000841F96DC423DF9AE38FBE2AE38FBE22BB7
+:10FB1000E0C7918BC18FC845E247BBFD87EF05CA9F
+:10FB2000D89EF5CBFDBBE287D472DB927B88DE8367
+:10FB30002940FBFE74925AE1C679D6548AB8F3E1A3
+:10FB4000BF2F08523E7B452EEB854FA7E92F71B999
+:10FB50005F9497B519720AE6F3576139E69FCEF5BF
+:10FB60005650BE66359663FD11FB7C41CA17FC50AA
+:10FB70009497DEE97F2985E47C40B47FE1589DECD1
+:10FB8000C1F2509DD9BEBCA182F235F5A2FDC803D9
+:10FB9000A120E507DF23C6B7F4CECB4CFEF9B47441
+:10FBA000EAA5DBA93FE49F9B917F8E3B61946EC3E6
+:10FBB000FC22D56623BC5D1C09D8091F0EDBAA46B2
+:10FBC00012FEC0425F0EE19993EC56B9937FD9C8FB
+:10FBD000A983ED262A76D6FB5E95FC0AD59B4624A2
+:10FBE000417276B4EE22FE4EF1C89B51DE1499F2BA
+:10FBF000C88ADFA57B0433A2F6AB68A090F356BD9C
+:10FC0000EC748117F0B0C00B2BBEB8F52190C8DFA3
+:10FC1000426B633F449778633FCBEF50BFE2618410
+:10FC2000B797539C31965F3E56C419979E3B3D351E
+:10FC3000915D347CA0B0E78F9AF722ACEF95A15C80
+:10FC40001BD1CFD3843CBD099EDA1F495F7A9AC687
+:10FC50001ACB200DC068DA47912F7FBCEF7DF57D70
+:10FC60000196DAFC0AE111F497749AFF556DFEC90A
+:10FC7000BC9E2A80EFF54AB00E53DE2F093A368B30
+:10FC80003811C17F6699FB764C9DF7CAED6C3F7BBE
+:10FC9000743B8E3369FC00A6FB9973258BEEBF3352
+:10FCA00090F4603AC1607FB68FE3DD6F8290830687
+:10FCB000B9298EEE97BB3F7B8FE4D2F22DB174BD94
+:10FCC000025A1DC2DF1C79E46DECBF72438A4AF20E
+:10FCD0006745636CBDCA0DBF3F209574E50395165B
+:10FCE0001F08C5F2015438041F7868089F7FADCC07
+:10FCF00091B54319E4FFF0B3BC4F0221EFEF52F48A
+:10FD000030D35F8B53D851A67E7E9B2CF4F32470A6
+:10FD100069EE42E2C336335E55E4ADF1212ECEE505
+:10FD200054C3CDCC6FAC78180420CBFB5381CBD51A
+:10FD3000683F5B079F8FA3F7D2969EAD74DFC0F23A
+:10FD4000B3A07EC0F6152C424E378EF910EF9BB44F
+:10FD50000CFF3F86D6E5E0753DD4A33FF3F7D548C9
+:10FD600010CE52B28B95E256EA7388A02717D111B4
+:10FD7000F1F769B1F65612083D7E789BF0E38CE806
+:10FD800094FB75B4BF4ED05D42EE3700D157B7F645
+:10FD90008A7B55427B852514F63F7B9AE0EB17B2B0
+:10FDA00057BAB3473AF63309F5364C67FA92B6D3E9
+:10FDB000BA2F3B9B9A92289E6A66B9EC25BB6CA62B
+:10FDC000DDC84A4FA0E73F60EAD91DF57D6EEE4FD2
+:10FDD000F1656CA7F825ECB795F87FDBEB8E8471A5
+:10FDE000C98AD9BF6237D444FD5F454EA9287FBB7D
+:10FDF000E2CBE67EBF017DE579DA977879E4D81D1C
+:10FE0000774E098181D171054F0F12FC6E4281F14D
+:10FE10009B81744E94D49FF99D568AF6541FCE73DD
+:10FE20007F076FBE9CE3243E03E38271126BA3FC49
+:10FE3000E707D3129F8BBC61F2D7148A7DC3F47697
+:10FE4000CDF8038D7FD421CE5D8E269BA9479C5B88
+:10FE5000BDD3515FF0C788C5276DA2FC687AEC79E5
+:10FE60008D55EF94D9EE50ADCBBB36CAFFAA3DE419
+:10FE7000F4939CCECA37EF71AC02B69FDB9F4FDB89
+:10FE800014BDAF670796A70CA2F8A27CC3D18BE084
+:10FE9000F8BC907FD54AD841FBFBF025BEA334EFD8
+:10FEA0006A0D8C67A81F2DECB8A698EC06111FD21E
+:10FEB0006E1776607B9248AD799D1D382365109D45
+:10FEC000CBDE1C66BED8919F1166BE7776A097C721
+:10FED0006D9F65959BF9FF10790D549DE65BEE32A1
+:10FEE000ED8742752DFB5D51EF23BF4DFCF901C03D
+:10FEF00078A11F9BF19E46DFBFF3395E777E7E9B24
+:10FF0000ABED95FFC2EFF34D7FB0AFF9D357EED015
+:10FF1000187F0ED3B80B4249C071DFFFA45FBFBD8D
+:10FF20005F1BAF677D79A4FFC3651C2FC07EB5152D
+:10FF30002DBF65BEBEC2A2FBA658BAEF65C2F14294
+:10FF4000E76AF1E72DDF009D0D1C9440EFFB35C9FA
+:10FF50006BC4AF29F274E66BA79A24F68768D05673
+:10FF600047705E29897D59F9EA8D150ECA2F0695CD
+:10FF7000F97C533C3FF305494F585E0F2CEF4A2163
+:10FF80003F95E05DB357261F02DFB7D1A2F824DD0D
+:10FF9000B7D1A2EC62BA6F139DA7FB36D1F5E9BECB
+:10FFA0004D7439DDB7892EA7FB36D179BA6F135D51
+:10FFB0009FEEDB44E7E9BE4D747DBA6F139DA7FB4E
+:10FFC00036D1F58F80FFC1F112C175E206826BD385
+:10FFD0001AA74A70C5ED7AAB289BC519E31FDDCB84
+:10FFE00089EE67B967AA6305C2614F8E0CD268BA01
+:10FFF00077B32CA6DFE57215FB0950ED6039E2C737
+:020000021000EC
+:10000000FF313CE522B6933F6F962003F175E986F8
+:1000100038FDA1E5DE3AD2B76F0AC57E5F0E517E8C
+:10002000F7DCAEE7404B0699F1C0BDA137E1F31410
+:10003000D9ADD33E9FDA27EB4E305D00B4CF5B8560
+:100040003FB214063D349EF7D10E218D8E4744F900
+:10005000A98D722890DB793E746AEFAF0EFBB0DE9B
+:10006000D25EB24A74E7CC89DDEF242D76BF7B14D3
+:10007000C6EE778A1EBBDFA9A363F73B1ECE694697
+:10008000ECFE833C9DE1BCBC0F9A77387EC6B45829
+:100090007CB0E03B1AFF27F05563F82E41F83E2C68
+:1000A000D1B9DA3D7BFA685DE15CDD7CAF83F4D7E2
+:1000B0008B85F37D7170FE1CC657B819B830D335E7
+:1000C000B2535F2ADBEBE72081636ADF0AF35EAF9E
+:1000D00038DF31E18AFA0BDB0B51E750F5B2CCFA8D
+:1000E000CC26A267233385F980BEA107EFD73097CE
+:1000F000E86F31F8983F2D8ED36B96BAEF77905E0C
+:1001000013BF4E9A0DF95D2A5B845E13BFDE2EFE8F
+:10011000A842B5B58FE0DB8D0FEBB4CC168B4FFB4F
+:10012000C88F91096D0ED263BAE38333728C5F93EB
+:10013000DC402E06040F610AF05F427DB2A6A35890
+:10014000F8E79D7EE1E787401ACF6314887970A3B2
+:10015000287FFF2825C47E073429D8BF64D963F1DE
+:10016000F084BED2DAB7B05FF92530E1A8CB92AD0A
+:10017000D37F8F56A041FAF5C8CF84FE34DAD51864
+:1001800054B4AEF6F927F9E639B762C67F5EE01CD3
+:1001900092E64F7E8E6BCCF8BB092DA35EA17CC787
+:1001A000B9E4CE57FBD07E8DDFF9FB0C4ADF92B469
+:1001B000C7EEC0F1AF96045EC4DB95C11DE334DA2F
+:1001C000FFCB242FFB2BA682BFAFB047423CAF89A9
+:1001D0002E1FEBB5369761E7F328D37F09109E4AAF
+:1001E0007AFA32DDC1F358AB7E3095FC31CBC1F4E5
+:1001F000C734C7EE5F177B28CE0EAAC2FDA77EE3E9
+:10020000ED9E047814170F102BEF17145AF7CA45F8
+:10021000BC8A06E2FE77A5E947AA746DF4887338B4
+:1002200094737DA18BDDA410E0C7F07985BD90EDBE
+:1002300062B407F8BC5F73248AD7033593CFD56FB8
+:1002400074CF64BE7C637D17BF0EE3F5E2860BAC12
+:10025000CBD413C6D3379CFFE1419A90FBC9D3F7A7
+:100260001A545CD6D63F5A9FAD7188FBB9E0CF884F
+:10027000B9B730B8509C7B97997A53A5CB8453611A
+:10028000A08EF4E30EBDA98BBDF8F5EEC958F12E92
+:1002900008AFA242C6E306CF9ACCCEF31D6B1D9FDA
+:1002A0008C687BBC15E125A74C76117F5CD1CF37DC
+:1002B0008CEAF73B103E4C74036E8DF5F593CDC779
+:1002C000F6CB799DEB423C7B701CADA35956C5BD66
+:1002D000F940DD38ECB7BD54E05DF7F6AF8027CECE
+:1002E000EBB2C2ACAEF3B2E2ECA7C845A9E128BDBF
+:1002F0003DC3845FFB10EF146A57F6C7BE1E9AAF6A
+:100300003DAF714F6FD28B6F157A31EE2BFB41648D
+:100310003B48A4974E91CFDE42F95339A092FD9904
+:10032000D923207B48CF5B00EC2702DDAF13AAC89E
+:10033000FD8AD84ECEBE15ED27ECF7DD5537A6D198
+:10034000FDFEEC944569F96E8A6FC2A90EC0BC64CB
+:10035000F38AFBD9CFBCF76F65543E8FFDD2D73BF4
+:10036000C53973EE0FFEB69CE900B474E7181ACFD6
+:10037000C7EF0B44D2649E5FF9B59F0D27FDAAF726
+:1003800059F730D2CF7AD1392F8274A8491F9755A7
+:100390004486FBDD9D70CACC4F6CBF649BF03898DF
+:1003A0007C72369D8758F7301EEAF1069F879F348E
+:1003B000CF4FF28C69A984E707075AE75AAD59E491
+:1003C000B2AA4E3252E7D03CDF94F97EC567AA91BB
+:1003D0009A86E527C1CBFA63A0CDCEE744ABEEAE5B
+:1003E000E899EEEE3E6E7F4DA1B06FAAE2E2A2AABE
+:1003F0009456079D6755FD9371514D6871273A0FCB
+:10040000B3D65F9DA68032145309BCE7ABF7E23F39
+:10041000E48470DC629677777FE3E7E6FAACFB1959
+:10042000D5743F033FAD7ABEBC279CC70EAD3E33AB
+:100430002EE61E04D96BB4BEEA3313F97BC55D27E3
+:100440001C84DFD40F3D8560DDCFE80ECED985C298
+:10045000DEA8A67B0D19D1DF051D77F69FC9E54FF4
+:100460009A707B72AF6DDAE604F37CBD50D8DD4341
+:10047000B214F6175CDA0AC6A604E35AF5ACF70D17
+:10048000BA9B57D3A4F07C9A37C505271A6FA709E2
+:10049000476BBE4DE9E1255E71CE3A90DE2FE8C88C
+:1004A000AB91FE5747F1D3B3A67FA0E93BE1FEFC39
+:1004B0005EC615C28EED6E9FE7F4F3A5137F18A9F3
+:1004C000B4DEFA4A269B5D407EB49EF35A6D242723
+:1004D0003BF84F37FBDD096739E61E4C57383BB810
+:1004E000BCE3FE19181E299BE410B03EF0D01F4B50
+:1004F0001C0E1CFF980D22C477A6C87DA7BE4079AC
+:10050000B41F882E8FB1ECC07483CCF7998E3D9ABE
+:10051000EF20BB6C49394464E45BC7DEEA5F477196
+:1005200097DA02D424C7A1BAB336F6FCB1128C3DD7
+:1005300029D8EEC603DED456CC2FBA27568E1D7BA3
+:10054000EBC70EB207A4856E3FC515E13CA7BE8080
+:10055000F9C5CD0EBE9FB5E4FEF8FE62F5E06C5322
+:10056000DEC6EBC39F179AFAF048184972E685DA9F
+:1005700066F17E8E791F11F53F23119E587A7028FF
+:1005800079D2DF99EF43A34C7C699C92B8FE92220A
+:10059000B10F2B1F3BEDF068DDD3D971E42705388F
+:1005A000FE895A95D3ACC1866B30F63F60B02F659B
+:1005B00030B697B548FF4FD8CF29CE4111DF385F0D
+:1005C00043F7D448DECE157A8253BEB992F5D13EB8
+:1005D000A006597FF1FBD99F6E43FD248DE2376E53
+:1005E000913DEC6F10EF078DF968511AAD37F3BFED
+:1005F000E73C4D70A53B0E40EFB0941BA5C4DFD780
+:10060000CF70F379FF265B80FBA140ADBB109EA1AC
+:1006100027C7EC26F77941E3BD93C8EE535B76B567
+:1006200092BD526FFB740FC525D44F043DC8D00E48
+:10063000F138352D339EA6F6FD67BA75BA5FBA3E1E
+:10064000D72855A3FAD720F21EE99927AB6CEC37CF
+:100650003DD5FC0B3EAF42FB2E42CAF7A9AA3CF6A1
+:100660009B59713F7CF697C06F7802E51B44DDE72C
+:100670005ED1B4C946FAF8A5B451517155D6BCAA99
+:10068000EE6CCDBE8EE4EE130ACBD1CCDF5CC1F1B3
+:1006900003B98A26113CAF9354A18F9A7AF2B560C0
+:1006A000FD35BC42FAE942D293110F3F94421CAF90
+:1006B00069839667A9FDDC1CA10F82D63882FCD71E
+:1006C000E12AF37DA2E5F634D26FAC7382EEF0A19D
+:1006D0003B3F0FF6B4E41D1CF7A404EC6FAAB14530
+:1006E000FAD3FC8EDB13CBD779834D3E30D01F621B
+:1006F000799E0EEA6334AF025F2ED165B54D5BC9BA
+:100700007EAF7D5E8E0F6997D4F498775ED4865F56
+:1007100093DE5D6353857D73C028A5F398F6194574
+:10072000FCEECB497BB83FF311E47B149775EB13D8
+:100730004D3315845B756FD4BB30BFF9895D3315BC
+:100740007A87272FBCC486F95707FF45940F091FE6
+:10075000A6FC1F9FF848940F0B2FA1FD39F9C4691F
+:100760009127030C11EC6F4FFCEFCC00AEEBB8E916
+:10077000FF043D3C9FE659FDC2205BB47FF1C86099
+:10078000C1378F27897AC773E186AB49FF280CF3FD
+:100790007D18ABDE6B83CDFB0426FEDFF462522BAB
+:1007A000C5095BED202771FF41B3DD4DE67B59485C
+:1007B0007FBFA27A2FE768E9BCCF479147115C9EC3
+:1007C0001FCCE73D370D4EE7FA049FF4A2AEE32DB0
+:1007D00023394F72C01E7BFFADC1DC2F2812FD579D
+:1007E000F756D3683FB2D3859D811B927617BF63BE
+:1007F000B0C9D4ABC4FE64CA6A695065B9339CEC15
+:10080000E697CFF62D65BBB9A29BFB9E83851CBBEB
+:100810002928C689F4D2D4CD7CEF1C0C8A4779B93B
+:10082000396973F47B29274DF81E199C26E0D7B14E
+:100830000F3D251E2768C2A52FC2BBB8137FACF69B
+:10084000175AF7F67FD1BABBEC5399989FB51E8023
+:100850007B051C707E69A8E71F5F63B61B6DCD43E7
+:10086000637AB8E9C5DB3708FEA7A5B3DD0E3F11F3
+:10087000707059E316F1F9E40A530F96036F38C804
+:10088000DE5851DFC6EFAFAD6814EF6D75D29DB184
+:100890002A9ACE32F3C53A33652333C8F488EB6322
+:1008A0007A34CC788358FCE980773C1D77E94F4B4C
+:1008B0008FED4FE3FEBADB87B08917DFD83E041314
+:1008C000C3B383BFC4C1AF831E73CD76458867654C
+:1008D0005DE9F18FDDD171EED71CCFBC77B2E27646
+:1008E000335E558BC5E3154DB9B685459DF5EF6E65
+:1008F000BCD71B1D4FEB6A5A1020F957D352CE714B
+:10090000B52B9EDBFAEB00B65FB6FD010F05531F5A
+:10091000531AB2492FAE7A6C9DC7A0731625E021F9
+:10092000BE792C244F4B747F75D41029461FABA67B
+:100930007F62FFC79FFC5BDDBFE1FCBF9050BF4201
+:10094000785737FDB58EECB73D862B4272FBA81267
+:100950009E4A72F4A6056E3FBD2F58D31CAB4F2D97
+:10096000FBE503D91A077707FAD8589F6AED43EDDC
+:10097000AA1FB5EB64BF57EF93751C066A20524758
+:10098000F38B6F5FD3F8A183E0AAA23ED8775CD740
+:1009900072E4248CF7354D3FFA54F6507AEC1D285A
+:1009A000A1FEA2FC1108F7CA6EF4B2C221B1F7028F
+:1009B0002CF840288BF59BE0130F95BC8FF33AF190
+:1009C000E86B1EA9285A5EDE29CEA91A6FFCF90B26
+:1009D0005AF772F524E907CEAE7A80D62C0925BBEA
+:1009E00045A455F6560FF905AA36D9F5007EAEDABC
+:1009F000FA8BC7E95C05DE76EA74F458B5F5B48382
+:100A0000DE3FAB928C88C47A1678A4919DFBB47CAF
+:100A1000EB47C25FD54B86E9B84FCB7EF5B9A86FDF
+:100A2000402409EB2F7FFA7DF66F55F9DC7E578263
+:100A30007DAA68DCE508BB13EC53E3FB53490F0ABE
+:100A40003EF125EFC3B19D12F4CCEDDABE72D3476F
+:100A50000EA29B13B8211969025E649FD634CA0B9B
+:100A60001CA989F6ADF52AD2FFB09CFD2017DA3F0C
+:100A7000D7101074F1DCD66D640F54BEE3D4A7D345
+:100A8000B8DB6EF100EEFF11C52FF0FD67EBB20D84
+:100A90001CB7D21EC8563915DF2B1FB995F170E966
+:100AA0009BB766B35E07462FDB685E6F2F5AE7E29F
+:100AB0008DB3789D4BC0C77858F933E1CFF85C818E
+:100AC0006989EE1B6F1F22E487136E2E21FAF81C32
+:100AD0007B223FCC11078878DEB7C43B644EB83A1E
+:100AE00035FA9DB93B8708391080D07BF4FE640D40
+:100AF000DAC5C417E4373F9F4AFDACCA55FC4E9592
+:100B0000D71F30E1259D13F11C9A62C59DE6E17E59
+:100B1000BD39A527D9C14E38E5B8BE8CDF69D0C82C
+:100B2000FF1BD58EE17664B33359423BFF4876E232
+:100B30007B84EF99EBC0BFB7200A9F6AB61C617C2B
+:100B400002B4BB527344FE61A243B48B52116E9F38
+:100B5000EDFBD0D19BFC1D99361840F36DFB88F35B
+:100B6000A0676954DFEABFA6D919F32E49CDA31FA8
+:100B7000C5D1B333EEBD133FC3B3065235D2378F61
+:100B80003822535FA471705C8AD75C72BF33E6BDB4
+:100B9000B04E7C71747ECFEDA44FCBBE5A6AD27F2B
+:100BA000FCFAE3F9C19371FC0036667DA5F79FAAB4
+:100BB000ECA1C7093E5548AF01A657417FA8A347FE
+:100BC00006203D7CFCD44BFBBF4F7EBA467BE674CF
+:100BD0001E2D96CF563E83F44BFE348477924E7C86
+:100BE000F64B07E9BD39156807E3BC3F76EB74297E
+:100BF000AD2BDDE2F78474EB063ED7FABFC55F97F5
+:100C000076C35FF7C5C1F373284AA53B0CC79F5C49
+:100C10007E09FB15E2E06BD9BBF17CB37A88C67024
+:100C20008EE79BF8B71FA2E0B8ECBF3F61BCFDA206
+:100C3000973807AB7EF4AF2CBF10AC1127E26D756F
+:100C4000E853CEAF23F9C5F95D33E9BCBAEBBA631B
+:100C5000E1195FBEC1E4471DF7DCEE8400C5DD4548
+:100C600076C8FC0E433BCEA58EF4F3A772F99C70B8
+:100C70009DA9EFB7AB110FE9E7EBD2AC3CDC40EF3D
+:100C8000C1B4074AD400B54F32E30FBC114F5A9498
+:100C90009EF47E8BEC21BD2E1C826989DF050CF24F
+:100CA0003CC2D05DF91A715F4B3EBB2D6CDAF54E3C
+:100CB0001C2FBCE6CB6D746E7E4871F1B9E5A23590
+:100CC000733C7CFFAF25FF3F092F16BF8A70247A43
+:100CD0000A188E5E08E71B0508D0FC08F079B09C66
+:100CE00052B6E745ACB704014CE724F1FE9465E049
+:100CF0004D6DCDEDEA374139E820F9BF14E511FB20
+:100D0000BD37C6962F6BF998F16C591C9EF908CF28
+:100D10007A75C5B3DC4B4DFF4A29949AE7BA6CCF7C
+:100D2000B7EF95F93CFF940B58DFA0735EDC3138C8
+:100D3000D522F3FE9C7A4A0A71BC61204BBCDF8A43
+:100D4000F84E7A968587F1F67D7C7AE2D97747D29C
+:100D50003DB1AA5FFFA5E4BF303DF1EBB707BE4848
+:100D6000F9E7FEDCFF2FD0B57EC5CEBFB21DD3BEE6
+:100D7000D3C9FED0F69DBFED4F72B9FD05A74EF861
+:100D8000DB7EA753C435EC4CE177CCDAFB09BF5DC1
+:100D900070C7972561965B6B791FA75FEAE0FD3E00
+:100DA000D5F2379623A75A9C1AADA366670FF68F24
+:100DB000D5BC901422FF40FB8E2F4746BF77F5CF5E
+:100DC000AEA7DABC4FD39E0273296EA63D4DC4591F
+:100DD000D6BC38E6176BC81E69DAE520FF7FC56F01
+:100DE000FE5E427CA9FD995D0EE25B68973E02883B
+:100DF0001F732EFDE903F65E745F0CD8DE3E7DE9BD
+:100E00003BB3E87DACAE701170684738D0BA102E95
+:100E100095A49775078FEA6F2D3C3E657BA2AA6566
+:100E200014D351275C24437C4F09B9245AFFF31E85
+:100E3000F21BB5E7A1FCD769DD5F9690FE74A17542
+:100E4000FFC7A5E27DEEFFE7D76D838B5AF753DF2F
+:100E5000DA750BFC1F76A926DEA78AA383AE78FE7F
+:100E6000DC0F38BF2D45E7F97E45FA7FFD5BBBFE01
+:100E7000AFBCEF25E4B7BDD87DFFF85BBBEE0BED53
+:100E8000FBABE6BEA7A874BFAE7DC7DFFBF37ABF9E
+:100E9000E2BA938BBEADFCEDFCEBEED08F64AF8B72
+:100EA0009ED8BA075ADB344CD775A3A78C2AB2FC5C
+:100EB00010C21E914D7D631D0C3336915D857A06FF
+:100EC000D901EB3245BE1EF50799EF0F72B00AD477
+:100ED000F7D5C5BBB68A1F54CCDBFF7C23C7B3ACA8
+:100EE000CBFE0EE495D17985F06304D7E8BE5DD8DA
+:100EF0003E9866D3823A3D57B5D2B709CBD5DEB21C
+:100F00004AF6CD3AED6A57F43B168ADB1163A7B86F
+:100F1000E3EC8DE402478C5D9204BB55F2C327E9F4
+:100F20000AC7FF3921AA3DD6CF2A12EFF42743285A
+:100F3000A0BA2F1E4E8BBE3E9C5C7CAF5235E104A6
+:100F40008641EB766A0AEB610AA0FD28D621EC4EB9
+:100F500084A316054730ED50C504B9A20D6338A22D
+:100F600001A14D1A4D70F5331C83BD6495E1DAD9AA
+:100F70001FAF3B7E1FD6699320CFD4C725FD9B872B
+:100F8000F3D822111F100F672BCDF795AF21FD77F6
+:100F9000D51A71CEF5CCEFBEC3F9263BEAC374CFA8
+:100FA00030D5B7A288FC8E5E43223A5D3543BC2F14
+:100FB0005846F7C032C9D41771B899AEBEA0B0BFB9
+:100FC00012ED0CF657AA40F69F3C091AD91FE855B6
+:100FD000E2E27A558E7B0ADE2CE29EA01034F14EBE
+:100FE0004B6CFC4F601214525CC314B9AA81E675B5
+:100FF0000A521A28EED2616FEDCFFEE17E008F918A
+:10100000BFA5FC8B8D549E8B7A3DD07D32A5F53DDE
+:101010008A6FB84D4E058EAB8AE0A728B85D76C6BC
+:10102000054A149CCB212D267FA2DFE126B213F2C4
+:10103000024E9582C72A5CBD62DA9FE87586C70BAF
+:101040003A5D2AD94753D4DC98F6B267EF7B64D770
+:10105000BC916E63BBE0F29CC131EDAFFAE0C4C657
+:101060000526CED23ABEF7AEB8A78AF6D623AF632E
+:10107000BB37EF0720BFF1155A694CBB66D3BF12CF
+:101080009962E7F766AE2C1C13336E737837C3A5ED
+:101090002A0B243A0FAEB2214960BDEFEAE531F5E3
+:1010A000BE37FA8A987E67183362F255ABBF0025C7
+:1010B0000360DCEAB340EF0796B636C6B41FBEB78E
+:1010C00039A6BEE7753485302DDDA705291D75507D
+:1010D000DC231D8EFB41E71BCDE1853AC5EB14D324
+:1010E00005D0323A16F0565018F2C8A3FE9728BD24
+:1010F00050FC3298EFB2269BE7AFEB6DA1C605B965
+:1011000014FFD3F0E35D12C743EE263C1D1D69A812
+:1011100048C5EA63CF34BE446953DBF87A7AC7B373
+:101120000AA08DE5AFDBC6E70253E4961289ED9F76
+:101130001EC39D51E72EDDBDD7F9A3D2F27D4548F0
+:10114000476B738C865DC4F727BD3B5FCEEB5A0FB0
+:101150005425128DE73F2AF51EA6384D2B4E2AB98D
+:101160004216BF4771B98893A9B3E94926F362FDD6
+:10117000409D6AE738FE65C582BF8D6CDBDCE82EDA
+:1011800023BBD3A5D1BE2667C4DEF3BE71B4B8B706
+:10119000F7459179BEA2A859D7931FBC3845B4270B
+:1011A0001F1F8D37DDC6FA94E780BEC78EF9FB0A94
+:1011B000F7A9C4CE9AA67F10E0F74D0FB44D903436
+:1011C000809EF794DAC80E87BD76FE7D99A6C2C9C7
+:1011D000A70BA87CFA5B1CC3B86BC22F0B49BEAD32
+:1011E0001C3CE4BCEF8C7ACE48A045C5412C2BD6E4
+:1011F000783E1E25CCEF1279CE285CEE99A7DBFA5B
+:10120000478DB77282D0FF560E4EDE4A78EB3960BA
+:1012100088B8A842B73680E9239CC37C4209E75CC2
+:101220009F22E2ABB4F3BCF37F7CCB88349263198A
+:10123000E57A1AF94133B6CA1DF7CE683D3FA6FFDD
+:10124000D0C13AACDF3F19E7B58562D744792BF2BC
+:101250002458EFB0CA9125613E43B2CAD7CF9E5CF5
+:10126000C4EF31C6D41F9AD751DF70E574F6AF15BD
+:10127000AFDFBFB688E037CA467125EB7F67E777F7
+:1012800006709DAC4FAC447A06E97CF0EC710178B5
+:101290007AB8FC90A4C5BD9FDB5A4CF982BEBE4112
+:1012A000C558FF92B3A9FC0EC067F5492CFF2E3933
+:1012B000FB3D7EAFB3C961F4BF9DFD37491C6F365E
+:1012C000E3E68F37AC26BABEEA7821C52858EF5737
+:1012D000D6A85F303FB0E2EC3AE187F88B78FF6345
+:1012E0005B679EF883A7139E06BDCFB53E0ABEF48A
+:1012F0009B2F334C78FA8A37CE5E8BFD6B8BA6E53D
+:10130000105D9E0637C7F59D561F9F4DF33DBDC529
+:10131000CE41B44D26BF0C149AEF11648673E85E7B
+:101320007EF19B368E473A88F860203EE4B7BE993E
+:101330005E4CED3295748A6F383DFECFFC6EC2E98B
+:101340001F0207172F0B3B185E4D998B2ACA19FFF6
+:10135000B574F23F58F06D34FB79B8D4B8B298FD4B
+:101360005CE67D1163EC45BD3FB96BC2977C2EB046
+:101370003617F5FC340A393E5347EF4BAECCB5B3C4
+:101380005C5A99F6C5D44CC2F7725784DE81A859CD
+:10139000FD19C317BBC98DBE07A69C91418B8ADF7F
+:1013A000D2868AFD571483F75F39E3E0F2AAD5A706
+:1013B000996F5BED4F98E7ABF42E23DD17AAFA8700
+:1013C000CCF746911FD64BC328DDED5819C54FA069
+:1013D000F1D30E3E3F14F7EABEE96F25939F728664
+:1013E000A4CEA2F9B56C3B339BE2056624A9B328D1
+:1013F000DEA06EDBFBB329BE60463F7516C517DC69
+:10140000573C790E97F7521FB0A1FC7AB964BEC859
+:10141000E7AA7FA2FC535BEF98C3F553C4BEDFB6C7
+:1014200075CE9C00F36337D3C1A9FA1E21E779E892
+:1014300060E9EA1721FA3DDB2EE5E6EF49C15CC120
+:10144000F73EB9BB0FBFDB09056D1C2FB6BE58F8C0
+:10145000FB3BCF5741A5F3D5CC7C30C8DF9CF95C72
+:1014600092F85DA2436DFD097E4736DEF203F2A7D6
+:10147000AE9080DFD1AF026D24D1D5425BF83D4AFA
+:101480005F1CEEBBB798F5A9368E775DBA7A27CF89
+:10149000EF53DD8C5B562345DEAFF54E04F69FF02F
+:1014A0009D88D838E30F6CDA40EA5731E1B2506ECC
+:1014B0009BEF10F37A94E6B5227D17C7392B6A5B50
+:1014C000B64FE851856C3FE524F37BD175BDDF292C
+:1014D00049F43B088DB528EF91E49EA96DE674F5BB
+:1014E00050607CEBA9841D3AF6537D40C89D916DF8
+:1014F0001F38A2E319779BF04D357FEF2A3E1E7708
+:1015000037C9A5A8B88315BD5BFB927E68ED6BE774
+:10151000BEB4F635F70568BE99192F3D45EF9D50CD
+:101520009CEB0FE93CE3B9A456F25B778F27D63EDC
+:10153000887937250BBE11793689F5A6F8751C34E4
+:10154000E76DAD2762CADFEED61131E5EBBF6A1D4C
+:101550001193BFC7AFC7A26FEBBB45DF5DDB8BF954
+:101560005F3CDE897B6D17C23B8BFF5483AF50DC41
+:101570009716FCC682B7354F0B6E4DDDC4E32AAB20
+:101580009F8F598FD236898C1E482D11EF5F298D80
+:101590005700ED87B2BA85EB75B71E39E5333EC704
+:1015A00059A6819FF4DEF875554123B7EBBAAE0812
+:1015B000F3E3159AE0C75DE3F823CC9FABD13E235C
+:1015C0007DDC5A77079FC6F5137D4F4086C37C9319
+:1015D000EE124A645FF862F4E372BA31117D6EE58F
+:1015E000BA39263F45BD3DA6FEE5396B62CAAFD08C
+:1015F000EE8E29BFB2F0DE98FC77F59FC6E9F79B27
+:10160000E2F4FB2762CAC787DB58FF7EA3761AC7BE
+:10161000A74F3C1A613DBCB556E5FCEEDA1C4E5FA7
+:10162000AED598FEF7D41672BAB756E7EFBFAB1D2A
+:10163000CDE9EBB506A76DB55E4EE3F946595BB84B
+:101640008CFCFBA33353F93C6AE350DFF525140708
+:10165000B92F5244F837F640E34B240AF2439FBEB9
+:1016600047F54EAB0E8E475CBB6BCC1F6EC17CC684
+:10167000EB322469E7D38B6430A2F0C7333D0C749E
+:10168000FEED01F13E567CFD8525424F9E0B61F13A
+:101690009EC06A3E0187B92EF5152393C54684EC9A
+:1016A000F6B9E0673DD4B65ABC5333177428237B90
+:1016B000D607FE7B381E29F67D01AF3163DDAFB062
+:1016C0007C36DD3BC5F6DF7737F2BDF267F6A64F15
+:1016D0002EC5EFD77A25FE9D8F033BEFBAD5C5F611
+:1016E000AF75FFF41DDBC5E8130B4B047DB54B7ADA
+:1016F0001BCD379026DE2F8A6F37CA5CE755C108AD
+:10170000EB1F11D43F28DECCA2CB19EA2173FD9A3E
+:101710002D750CD1C71ABEDF50D5A6E94184F798C4
+:1017200043822E46205DD0BE8D3D2AE86024D20142
+:10173000CB41D33EB4E800EDA997A8FDA983A03B17
+:10174000B17DDDC41FC9647F8DF92C14A4F4B2B33C
+:10175000915DE7B07C5C9BF8DDA40BD993965EDAD3
+:10176000523B97F16867AD8FD3D6DA4A133FFD9CA1
+:101770007FB97635E7F7D40638DD5B5B6FE2670348
+:1017800097BF5EBB81F36FD4864C3CDDC2DF3592E0
+:1017900067089FBB4B4C39ED2A37ED0A917A8D359E
+:1017A00076BEE78F9F889FCCA5B9127E544A21E26E
+:1017B000DF75E9013BE5EB92690F68D601AE7F9DCD
+:1017C0001B5A490E54E5BC28F4B0383C29CFBC86DE
+:1017D000F164A619C77A20BDEE5607E2C389C6FB9D
+:1017E000ECB1EF8D5E1C5E2C73AFE57B7DF17CF17F
+:1017F000267A8F42EECA0F0174BDAC4CDCEFA238E2
+:10180000BDAFCAEF555B9B795F4CDC7FA9EEEBE681
+:1018100038DB7F9D9C514D39030BA87E87FD9D7C55
+:10182000703EBD8FD7052E71F6F7E141627F2DFB2B
+:101830001BF54CF64BB58764B6BF2A731B3C6C7F17
+:101840008F8E78683F6FDA2103EB8B8A38EF5D4A21
+:101850001D6914D7D3BA7F1CCB99557B882F2D33A4
+:10186000CF7BE3CF6DABE9BC574A04EF30C7D52F30
+:1018700037CF7BE3D75D3DFE089FF7565FE05EE91B
+:101880007B25B1BFE7137F7FB73B7CA17882E8F768
+:101890005C4F9EAD653BEDC8B63B1E0AF4FDD7ED2F
+:1018A000DFADA5DECF4A441C35DF9BB3F6B3CEFCDB
+:1018B0005DCEBA492EBEC7D03E42E5F76FDA25F1BC
+:1018C000FE4EFB5F415FA3D1FB3AEACB24172ED338
+:1018D0001DCC574787C57B01E3E95E6282F702268C
+:1018E0001C0A0553A8DDC100FBA3C6ECF305E9DE25
+:1018F000EDA8D70D99C8ABF465AF4C7860C9274BFC
+:101900005E75D295796F8E6232F2BF3AFD698B4671
+:10191000E7907ED761B7BAA7F23B45A75B81A349A1
+:101920002DBFD8F083864CF712461CF20549DED64F
+:101930009976E6A813013915BF4FF8CCCF76D018A9
+:10194000B453E552718FDA8882AFE5D7B2F89CC5FF
+:10195000D7AC7B7BAAC3B785FCCFF04212BFFF1286
+:101960003FEF41436DD67BD6838612DF33EFE94DDF
+:1019700091CFEE3A4776419B8817B8E46CFBE3645D
+:10198000F7AC7AB607DF53BB907D50A39E4EA89F5D
+:101990005A698D4D9CA30CABD08693BD497A2BD947
+:1019A000A1965D1A5FBFAC74D2D8A15934AFF16D66
+:1019B00006E1B76A3B2F7ED7ACFEF4BC76A1357E3C
+:1019C000CD8E11EAC228BFD5EAA19219C7F2F5DE81
+:1019D000A19E10991B23C7BEED7A1FD26119E11792
+:1019E000D98624A7BE4F3B80EBB80E5A595FB9DEAB
+:1019F000FC1D8B1B001CD1F7646F0483F9C39F741B
+:101A00005F0DE1CD6288CCA77C8D14A97A1141F8D5
+:101A1000C9C4716AAED6555E5FAC7C4E36EFC1C6A6
+:101A2000C3FD4E136F2DFEDFEDFEC4F1FFF65295A0
+:101A3000EF41B73F3BCE46E738EDBF97F9FD54ACD9
+:101A4000C87C25384CDC3B1D3ECF7C8704F9CA009E
+:101A5000BD2B5F393D7ECE64F61FD1C106C59F2ADE
+:101A60007AE1F551F7CD82E6EFBA6CC194E22553E5
+:101A7000E78595E8F3B39F9AF32FBF7632903D74D4
+:101A8000952AECCEAB5C90798678E1D9D345B390BA
+:101A9000415C45FAEC707E87FD618273C73B20C4D0
+:101AA0008F2EC17D7B5F9CF3C14D12FB4B9B9B44F2
+:101AB000BE78711AAFEBABEE23F6DCA304D7BFB848
+:101AC000491946F43D343D924774593CE6ED74099A
+:101AD000E75562DEC7C269D743D4EF5BBD6BAEE3A7
+:101AE000F3A1C6369ADFD0F4B6F5F7917EF9AC0DC6
+:101AF000C86F7864CCED4B204A2E7B4A27FD8AEADA
+:101B00006D97CC77EA7688DF33C016D9D1FEAD3F2A
+:101B1000E915CF53BD56D3CF00AB9EE77BFC3354C2
+:101B2000B1073039CBFC3DC948FF44BF2F649D67E6
+:101B30000D25580AFF23BF2BB6DDF44FBE39F483C1
+:101B400039E45F84D6481ECDE34892B847ED29F5C5
+:101B5000FD8EF8CC50F2F3D23A7E26FC0347D2FC3D
+:101B60007C8FE46DE4CF747EFC975A17A7EFA27DBB
+:101B700044E9FFA07D44E9FB681F51FA21DA47944C
+:101B80002E3E839DE2FECDD08DB799BF76B38EEE0B
+:101B9000F94BC0D4EF13FF4ED35B26FC4B9A0EDDFE
+:101BA000D983F0A059E6F8E8E26715D64F4FB68C16
+:101BB0008AF95D52A4D7C3B4BE92E63FFE84EE59C3
+:101BC000973429AAA4D1BDECD3D91C7F18373F8202
+:101BD000039D37447638C4EF2999F3DD9ED6B69E2F
+:101BE000DA6F7F368F6648E738020F773813FEDEEC
+:101BF000B0156FF7C450A17F7DCF19298B3E7F8C24
+:101C00008F4F633FF018C2E7823FD03881BD320C5E
+:101C100060BC8CF56FF4D3C53D042B2DDEE1E038BC
+:101C2000E5ED3BF65F7D25F6F77F00222F54BD00E2
+:101C3000800000001F8B080000000000000BCD7D1D
+:101C40000B7854D5B5F09A39F34A32934CC2000957
+:101C5000123809AF00018664121212E024048A8A45
+:101C60007482D482A28EB462541E23D29ADED23FF2
+:101C700027244012830605CA558401C1C7FDFCAE66
+:101C8000D102175BF44E50A9F6B73422E2A354C731
+:101C900047552C4A8A62EBAD2DFF5A6B9F939933BF
+:101CA0004C0222FC97F0E9CE3E7B9FFD58EFC73EE9
+:101CB0003BB3265E5E24C900A7E9670A80CBDB1729
+:101CC000A008604CE9D70FDCEFC1F2599BDB0400A0
+:101CD000F360DB3437F6BBCED1F1A21BEBD7BBDF11
+:101CE0009B968EF51B334D07A8BC49CE999E812546
+:101CF0004088DFFF515EC5810CACCDF456DB024E4F
+:101D0000800A9000F2807F4EE37F531D29008E6889
+:101D10007D9ABB8FA1FEBDCCCB0CFD2F978718DA27
+:101D2000AFCC1B6D68D7E79DE92D34F41B97D19597
+:101D30001B74D23EBEBAA71CF70326080FA37DED85
+:101D4000FEF2EDDBB19C35719E8FF67F0CDAAE1999
+:101D50008D1BFDA4A479E3FDF4B245B165F503B88C
+:101D6000857EC7F6E3103E5286ED926BF9813BF11A
+:101D7000BDDB322590BC00359BADEF4762D6B10488
+:101D8000FC6961EC77DB0EE37380882DEC03B83DD2
+:101D9000E00CB62000173D81ED0E433B8FBB78AFC2
+:101DA000CD4DED4BC0126DCF01A83D9AF3E40B3140
+:101DB000E38DCBE8BCEF7E1C6FDC9E39EE065CDF6A
+:101DC00093A55F0F90719FE55E97E723040D4C800C
+:101DD00009A711E42039CD80FD4EBD2485245CD7B0
+:101DE00034E99BD4483E3EAF423C67E17B26F90F85
+:101DF00065D8AEBE2CC14E1CE76F75F2932F5869A3
+:101E00007CB8D19F1FA50B80950C5FBD7CAB0E7F6E
+:101E10001D01F0C73A07977FAA7373F96E5D269785
+:101E2000EFD5C95C7E5097C7E5AC431068C7F1FE9B
+:101E3000FCF7F1007D681C15A06FB41C67F39A07CE
+:101E4000E03ABA7E2F85B6E37EBF289F9006B4CED7
+:101E50006F70FE620D0F4802D5448CA5F8DF8FB776
+:101E6000BD98E5E3E7AA0BA75AF27709141C77B9E6
+:101E7000D724C65DD4F1629627DA0ECBDF33F48720
+:101E800015A603867A638EB1DE5A7120F67D1D0E8B
+:101E9000F1E52D9BEFB0055C58AE372921E799EDB0
+:101EA000FA7AA6ED4F524C389E659F3D64C7FD2DD2
+:101EB000712BA0607F0B80D29E7FE67B00F50CE744
+:101EC000791204DB138C5B47E312BDEF4F02E93C50
+:101ED000C67D0B6983D6A3FE973DB413DF7B2B4DE4
+:101EE000017FCC3C2DDAF89FA5B7FDE22BECF7D9AA
+:101EF00033404FB00E73693D63777D6C3663392E86
+:101F000059D0C95877C49C81E5899A7F6C3CE261BD
+:101F100032F59B26637B6ED71107A2FCBEF6AB366B
+:101F200039106F6F9BCD00034020BE04FBE31854B3
+:101F30007FD07BD5DC46FCFDCAFD4961F379ECE737
+:101F400041E445A6A34AC1EF3710DD88791440511A
+:101F5000B37415E8F32A241F68FF547FADDDFFE654
+:101F60007AA233E8DA48F2E13840B885D7AFA4C6A0
+:101F7000F2FFD2677FC2FCB9280BF99E04E066C16C
+:101F8000BF0EFC773A97F83534DD89EBBD358CFC14
+:101F90000F179FFF9FF13AA37C3E22219F1FBA1289
+:101FA000EB4B9F91BC766C3EB96F98E0278DEF7537
+:101FB0003ED7E1B87493C47CA9D73FDF27CD08256D
+:101FC00080F7368D2E86285DB369BE65CF5AA00591
+:101FD000D7B76CD288FEB1E3C7BFB7B44902396640
+:101FE000FC279FB3D710BFC8D0D5AF1AF967DCB3B1
+:101FF000A7322AF24559CFF868D3E44DD720FF180D
+:1020000094D726FF9F7E8EF301E27127C2A7327319
+:102010006E36CD3FDB094ACB7806CB1C07CA89ABAD
+:102020000588E0EA92EBB201E1B919D12521DDCDB5
+:1020300051AA5FBF0EF1F80373E02A92F3C7BC43C5
+:1020400078FC6B5CCBAD606672CD36E17873E7D817
+:102050000B693FB31A045DBF9EDE759C9EBF3E298F
+:10206000C5D480EFBD6E8246C888EEE375AB3F9B5A
+:10207000E80D37EEFE08F163524649A7537A9617EA
+:1020800044C91FE97894A2F26F9AE454699E936E52
+:1020900033D3BD25ABD546EBBA154207149C7789DF
+:1020A000376C23F9773BB82D5462D1D54D1F447F4F
+:1020B000E5FFE8388DEF2FE9944226ECDF5ED70E7E
+:1020C00016C4EFD3757BB91CFCCDE0C6CB101ECB7C
+:1020D000C7DBBC2DA4B734FA32AB26389D405F9DD8
+:1020E000499F96683BAEBBC2E10C4BA9F4D87A3C41
+:1020F000761D8DD94ACA78DC8FBAA63C9DE99368D3
+:102100006170749FE36C004E92F33B5358CE1F7B7B
+:10211000AED84C783AF63B6BC844F52D23DEB8D3E5
+:10212000C7752079732CC36BB6517B466E48C5F6D4
+:102130005BCCA0925C86ED426E3D3FE9AE77488E67
+:102140002DDFE932D94D828E653401A447D7BEF325
+:10215000EF38CEADC8AC766F546F2C9AF2E8C62734
+:10216000900E1699DBEE29C767A7203CD68DF0FCB0
+:102170008BA97D38E9ED8F1FB287CDF4DEC323B77D
+:102180004B38FECBA98191B41FC854FAE7E0F39A0B
+:10219000437DA105DF9FFAE83F0F92DEBCF5C9BE83
+:1021A000CC5F3ADD4F233EC4F59C403EA4F59CDC59
+:1021B0003784F92E8A7F0187C5280FC8246ADEB1CB
+:1021C000CE4FF80C24CBFCDC02AA7219E17BEF4D58
+:1021D00040765381645288CEBB9A115EA633E9499A
+:1021E000196FE6F7169951BF121D06E44282C7091E
+:1021F000935CA0F105D07ADE7F6EE4F6167C7FAEAC
+:10220000D63F4A774797FC86E86EB3DD6BC7251C3F
+:102210004F32EA7DBD9C393E9DF9E516C79760298E
+:102220008C3E5F52FBB5B19E0F0AC98D8206B9F094
+:102230000E2CEFD4E07EC548FFF7C7E3FBB7B5AF80
+:10224000DBF38A4CF36EFEE9DB34EF4B4E9E175EF8
+:1022500011F03B6112FAA55BBF3AFECAE3A3E4E1C9
+:10226000F5EACF3F7EE88DB1011CFFE3DDA38703D4
+:10227000D2DD02A9F3A307115F9FBB3ADFF93996BC
+:102280004FBF74A81FC12F7EBD8B6ABF004B8C1C33
+:102290003A6E32F17E17D13EF0F96F0AFD3733BE48
+:1022A0002DA827106E0B5AC66C2779304DCA4F23C4
+:1022B000BBE9C431E3FAE2D7A98FAFAF4F1F5FEF9D
+:1022C000B78CE08F709838CE2DF4ABADF373C2EFBE
+:1022D000677B469B9015A3CF333AC7A6E747F1E447
+:1022E00057EAADD4EF1A12F5888AB90E81D7B935FD
+:1022F000A650430EF7E3F6EBF039E1BDC2D3C0F5CB
+:10230000394ED467D87F51E66F785D24E81CA8D792
+:102310007E00FA4FF5AA5F61BF3797A5B25C987B44
+:102320004B9B95ECDC6E79A6BE6D3E3DFADBCB3364
+:10233000849EECEE07CCC3A43F013767C1FA24ADFD
+:102340006E2AF963C3AF483EDF99EA95D064841AD8
+:1023500019C2C4D7272144F05E6D0AB2BDE7203D03
+:1023600080658BC99B69C1523277F5019E27C47085
+:102370009A06010BD57F6B8A3400BEB7CA539949C0
+:10238000F4FF2638FD6417FD207DF51892A395EE25
+:102390009973E9F96C35D5DD82FB6DB4CA77E793A3
+:1023A000FDF303C94B76AF0E175D7FCCB578AD0456
+:1023B000DF7E41D9AB22FD16BEA2384C0C7F874A86
+:1023C000E3BE6109F6A575BDE55C3FC664263B2DFD
+:1023D000E41A839B7DFBD07F14FD1EDFFF2328932F
+:1023E000C81E98F35B07CBF19B40667EFF11282C3B
+:1023F000C76F8600D76F8188F54B7CEFDDD2FFD9A0
+:10240000B91FA2FB7A77E257BBC9AE9F2BB5F7CDB8
+:10241000C176B512F248CFFCDAF17FB646701D4A9C
+:10242000830592D0BEFA35D129D9EF475DA19DD859
+:10243000EFAEE42DA91D588F9884FDA556069FA4E4
+:10244000FEAA19FC0D58F64D0E3C4F7CF8CB14310A
+:102450004EADC5E126F94806168DF3D13B2EA67781
+:10246000D2BB3761BD0CB145F03AD157D09BFA577A
+:1024700060B97BC2EAED5468DC53B27727BD3AD528
+:10248000CCEFC36999D75116A75F7CA3CDFC3EFC66
+:1024900043E6F72775590CFAC537CE1C7C1AF73777
+:1024A000E5EF965EF5CECD05827F7C7DCCC144F60E
+:1024B000E0FF68FC851092683D0D7B4DA116264219
+:1024C000611F94E9F40891D5446FE50041A27BD8DF
+:1024D0008B7A4C9F2797F7FFB9EA233AC476B60761
+:1024E000DB9F2739690F0A3EC1FA54DA8F23085E51
+:1024F000B2D750218305EB49F8A290BB6E203BB6C2
+:10250000A502DAA93E092212E17B0A417A08F9C341
+:1025100032D3ED5450B8AED3F1F740E5F272087102
+:1025200079258485BE07B9F1299CFFAA4F40EC6745
+:102530005498E91D1D19F747686FC0E5B798C9EEB3
+:10254000F0FD30B1BF30A840870B22C473EE709904
+:102550000E814C31BF80879D9EFBA2F070C4C123C9
+:1025600089E0E18DC203E710F03803BE023E931408
+:10257000840FCAA7C9D025D13C8A66DF548297CB85
+:102580002AF073D90B5C5EA8F79C09979248C01299
+:10259000C84F009FA989E96684069F3F1600CB2F8C
+:1025A0005DFE5C5B20F3735D0E217F66923D1A2F0A
+:1025B0009FF4E7BE94CA2F64A487AA82AC7916D48C
+:1025C00067BEC2CA3B8760FDEAA7F344BDACF257C1
+:1025D000B958FF41C128511F5759684578D59B46C6
+:1025E000CFABC2FA90806923F1E5F27AB4AB715FA8
+:1025F00081A47B8244C7A60C709BB03D505FE42D44
+:10260000C07A00E912106E7629A79EE06CFF397837
+:102610001B7015196981C905B8DEFCF99DAB053E33
+:102620002BFBCFC5FEC73BAD6CB7ACB10583842790
+:102630006477777D69747FC79FFE790D3D7F7A004F
+:10264000B849BF80472EF4BBCE5C8FD9015C5F8C4C
+:102650007283E21F38DF4C9A2F80EA49A6753D2528
+:102660008508FECBEBA7B13F7024CFFFFD82BE31C2
+:10267000E3E33EA4F134AFD073E0C92924B8958CCC
+:10268000F45F4BFD4EB850BEA651BBC0434F6563CF
+:10269000813297E68D7F6E4EF9E6862538CF52A4BB
+:1026A0001192D38B0B0237D2B84BCD914185F86C88
+:1026B00065CA3B36A60B05E993E403F12BEDB7069B
+:1026C000E991E87ABFE057E40077B7FD8AF8F5F8BA
+:1026D000BB6E58E813224EC2FF15CF0D3E8F6635F4
+:1026E0008D7F3BAD63A9D4B590E8F2F3F4D76C7F4E
+:1026F00066BE1C28E84E935B4B9FFB9AF9E7593363
+:102700000425CD3F8618BE5BFA5C9285FCC3A59F6D
+:10271000422805DF2FDBF77803F93BA5E8FF939FFD
+:10272000BC78D753CC6FFB485F22E896FEF7B3CF57
+:102730003F487C7A6512C7A126BD767408D94153FB
+:102740008E461A106D70E2D9372E13F4AFFB257F39
+:10275000339D8F1E9F26ADB887F0BD0CF16FC7F972
+:10276000969982A26E75B855967BC24FAED1F6F19E
+:1027700019746E9CCF72453D504AFBC99480E56345
+:1027800048F81332FE23FEBFFD686835AD13A46F11
+:102790006C246F4EA15F4CFBBAFDB178BFA3EB4038
+:1027A00029F9DDE417E33E17B71BDB97C6EA870478
+:1027B0007EF296022D1E960DD9B4AF5FA33FF4C1F1
+:1027C000309A777E1AD9871329AE90405EEAFE715F
+:1027D00028B9F29102B697DB25E287324BE2FE0B75
+:1027E000F3855FACDBFFCB1E92D88F5BF6509F5119
+:1027F000EC276BFC0A612FF3EF93A45788CE022FCE
+:1028000003D1C12DDA9E60731FA6B95B9B4CECC748
+:10281000D8A53BBCA4F7C73DD2FFB67F63BA4975C4
+:102820004326D527CC7DCCC3F655908435FA556C1C
+:10283000673E99DE954BF33F992E838AF3352475D5
+:10284000E5929C559F757849EFC6AFFBED02E10F0D
+:102850000C098FDF14F1083C139FE7BC54BA89F0D0
+:102860007C12F99CF0B7CC35BC3F38C96E989C19E6
+:10287000C1B241B3D3731E1B95361BE1E2A3F5C66B
+:10288000D8D51DAF5E9342F6F26E8B3FC58DFD4EDF
+:102890001ECE35F841F16551189153D84BFB1B33CF
+:1028A000870412C05D2F7D9B2C0C2F9D6E7F5DA732
+:1028B000C00756C247B9D8876A77DB7D447FA1A994
+:1028C000E44F2EBB19DC2DD87BD9CB0F3738A8DECF
+:1028D0000C4CCD27E97FD4FF137388ECF15FA68CF5
+:1028E000BDB71CEBBB8E59849FA22A87F263EC58BC
+:1028F0007BA6196403BD764A8B491E13DD23BD26D2
+:10290000C9C920C7D0634A5E86A1EEF20E30BC9FD3
+:1029100056926B684F574619DA8BA13612C0F514E0
+:10292000654AEE10AEB8CF8C0243BB1DE93A4CEBC2
+:10293000FC52D85125F84FE8DB20DB4365118007B6
+:10294000900E261E37DA59259136F637930E5B0C1A
+:102950007100FB59E250C9851A7F0D8481C45F481C
+:10296000FF5E9263270F8BB893ACC17359B6D0CF7B
+:10297000CB5E96D80E5C76CCCC7AE22478BBF14361
+:10298000F251E7BB78B8F7F51BE1DC7FAE11AE5929
+:1029900001235C2FAB31C2353B6884EBE05A235CEA
+:1029A0007354231C87344D34F41FD65669A88FD82E
+:1029B0007485A1FFC8D06C437DF463D71AFA8F6980
+:1029C0005F60681FB7F736437B3C5D8D0F2F33B4D4
+:1029D000DB538F305D1D40BA32A13E287CE9DFE237
+:1029E000E8C2C2702F1AE8F48662F0AFE23FC27FFD
+:1029F00099969798006A03F1E385C2FF1584FF94C6
+:102A000028FE75B9DA139FEAF81D42FA9AE565794E
+:102A100084F07EB22485E9E5E04B270F2B40F84F88
+:102A20008502DCEFAC29228E22C9C126A2934E700A
+:102A3000B591FDB9C61264FF4545B3702729E53845
+:102A40007FF3FB25E86FC6ACB35A49024BCC7EC777
+:102A500087DB0DF5C297F61AFA1775860DF5F18723
+:102A600041227D55F0A6F7792A8B3E5438FC55FC5F
+:102A700049F0792A4BBF0CDE45FA37DECFBD5AAD9F
+:102A800097D2C8AFFF7BFBF368D6A07F364825BF3F
+:102A9000377247AAD73400E191FC4E03F9DF807604
+:102AA000B4159511B80FB23E98EF10EFFF2D69F2F3
+:102AB0002AEA6F42FF9CF08E70C9237BAF1692BD4D
+:102AC0000417B25BC80F832B843DBFDAA4B23D9AD2
+:102AD00084F628D9230D157EB697A74370203DBFF5
+:102AE000069455C4779219ED577CFE3F23028D85DD
+:102AF0004562B1443F777D21B3FF3D85FC6906A661
+:102B000002A4F74ED0EFB43E78691EC5E34F902E75
+:102B1000C3F5B7B5BC304F253BC303EE08AE3B2031
+:102B200040069B0B03F7D0B8EF9BDCAB0BF1DD83CA
+:102B300013FF3288EC917585C2EEB34B0829A4814E
+:102B4000FEF315A0E78DD9CA7D8545D1384B4FF4EA
+:102B5000A3C733F5F8E6AEBA309716B75722BA8B4B
+:102B60008F3B46CCEEAAF1A4FF9699D8EFFC0B2D33
+:102B7000AE94E7496539EF804E7B3A2F99FDFFEB24
+:102B800035BC991D9DAB7E8EEFDD1014F6D60293F9
+:102B900097FDF5DB338F731CC52E99C047FE505A45
+:102BA000FE76117FD1E3259749DFC6CE3ADB7E6FF3
+:102BB000CF3C668857C1137D12C6D7A3E3ABACFFE9
+:102BC00062F6B9659347E835F2F3DF6FCEAE84D491
+:102BD00044F37CCEF1ABEB83AF1AF8E2C6DAB70C64
+:102BE0007C7093FA9EA13DE2E9B252BC32B2276BEF
+:102BF0003AC5D73FDB6D2F263C20FE0F16C6C4EB2F
+:102C000022CDA3AB60ECB9ECF72FBC8EA3759D8CE5
+:102C1000577DBFEFD4BDC9F5485D84CBF8FDEAF11F
+:102C200011BD4471D844F6CC5D12CA0BF277495EEF
+:102C30007862E405401ED9FF7749A3BC44EFB6FD96
+:102C4000C147A9BDABDEEEDEEEE3F808C74D6A91E1
+:102C50002EC86E00A7787F81CDC176E81D3EE12F9A
+:102C60001EADF8EA06B25F7320D58B32107FC27FAB
+:102C7000A2B8C97C531AEBFFD55907B8FE61338857
+:102C8000BC514DF821F25797A6A60ABB58C1FE5871
+:102C90003F9161E6FAA11181AF981FF3C39CDF5801
+:102CA000DA5FC4F3C01319447CF833D9FFB5E05799
+:102CB0007780DA6B32D0DF46FAFDC4AC8E35116B0B
+:102CC000ED1A70AD05F1FE49B2FA395934637CFD55
+:102CD000AE253FF3139BE0DF49BB4ECF53113E1FA0
+:102CE0009A24F6CFD5674C1CAF0167C4568D7ED8A9
+:102CF000038303561F8EDF66457BD2299ECF1E13AA
+:102D00008DCB9EB0624971D024513A7DC2EE75F9E7
+:102D1000449E532F4710CCB09CE4D3E57CEB708AE3
+:102D2000BF9DDC6C07925B38BF42FE96FAAC88E32D
+:102D3000F7CBF02F028117F71A5CAF6788FC05F11B
+:102D40009F4742BF16F721FB720CF167726053B1C7
+:102D5000FDFD3DF66D84BFEEF51E16F1B0CF9A472E
+:102D600073BC5BA713D9A7C5BD7F0C20DA2FDB4648
+:102D7000ED8B5F7EFF1D8ACFFDA63030D487ED0B33
+:102D8000CC7231C9C9C5A91D1CA72BF6C93C2FAEF1
+:102D900097F78B72AB117D7158EC88705CEF6CF11A
+:102DA000FB9EF6FFD9CD9D1BF3395E2D8F25B9A271
+:102DB000CF8BEB28A675E8FBD4D7111DA777FED1E2
+:102DC000E3D07AFDE387D60CD7F20837FA13E8E5AB
+:102DD000AB743AB6268EFBD768F88CC74FC18860B3
+:102DE00088E3796E703760FD5A0D4E9FCDC3FD703C
+:102DF0003C44194FF85D3CDBE92538EBE3F7CB8029
+:102E0000C053BDCC73C548FF1CA2BFDB82224FA0BC
+:102E1000B723FD893867730AD3EBE2E7DE7AE7E789
+:102E200038CBAD8F8E2924FDA1BF1F0F6784EF70B3
+:102E30005ACF0249E4CF10BE37D1F8F1F981F385BA
+:102E4000EB89EC4ED60B27B6FD2C44EB3B91056E7F
+:102E500013F2E3E27DBF7DD33496E8C41996B084C3
+:102E60005DC6F857BC9E7243E03A92237694236481
+:102E7000DFD8F5F7065A0CEF55672A77F9D81F55B2
+:102E8000EE2679645785BF362450C1F5E556E1AF8B
+:102E9000EDEA34CBC4DFBB2C10223DBEFCD50C9533
+:102EA000ECC7E56877B0A79317E4F54232FA41E939
+:102EB00009EC069357E6785C5A600DC14BFAD1D401
+:102EC000079FC889FAA3BABE2CD2F4BD927F6303D0
+:102ED0008DEFD3E281686772BCB314029A1DA1C55D
+:102EE000E19A0F701C4297DB3698EBA0F8CF9ABEA0
+:102EF0000B1CE41FCA382CC7D73CB3D3A0173B72B6
+:102F0000551D4ADA11D1BAB5073F5E3F1FC06BECC1
+:102F100047DB0512D6D07AD5814823FEDA3AEB7723
+:102F20005D2F60D932E691C84A6AFBE6B44476A4C4
+:102F300043B303B8E847EB14EFD906AEBEC384FA37
+:102F400033D96B81F763F4A00339FFFD3C6D5EB2AA
+:102F50000732BBDBFF4078EB691F17AB24F8BC6F6F
+:102F6000EDA5DDE6AD49240F12C28BC8C433FD18B0
+:102F7000D16332C4EC9BED9E98BA14072F89CAEE38
+:102F800076E57482FCE577DDD7AABAF0AB1F1AECC0
+:102F90008110AFDF6AF18317E9C9E6C176C3390C46
+:102FA00055CB7F220117C7ECEF1CF64576B955DBF0
+:102FB00097F522EF8BC6F5F7BBA4D7A75EE2EB0B24
+:102FC0005FE2F885EA4B1B7E4AF5A50D3FF5125FDF
+:102FD0005FF812C72FCCBEB4D7A7CCBEB4F1AB5E9E
+:102FE000E2EB0B5FE2F885AB2F6DF829575FDAF063
+:102FF000532FF1F5852F6DFCAA6C073ACB81CFCD0D
+:10300000A6379A4374CE46AA0A73DE3857058E4710
+:10301000A73603E72BB67B851FA5C7E947D2103239
+:10302000FA2D567716D9D1DB1BEFABFC318E732A04
+:1030300013174FF9FCEC230A8DB36D1A70FEC2D939
+:10304000F8D1518A7FE540D81BCEA1B89A04E11887
+:10305000BBF4FA600A8463FC896AA58FA15ED43947
+:10306000C0D0FF964D430CED37B78D36B4FFA8A9FD
+:10307000D050BF492D33F4B7434E4B1EE55D1B2D99
+:103080005ECA8359686FA567C20D76D8F83D05FF03
+:10309000911F9383167DF7B8B88F74D56618D7192A
+:1030A000D77EB67C407C3E614EB1964FE8FE7E41B5
+:1030B000BC0F6E4FC2B8A79E4FD0F139DC92C4F856
+:1030C0005AA78A7CD39A69C28F9C1A729B286FA9CF
+:1030D000E36FB44672FABEB7D519FDC9F446772539
+:1030E000FBA34DC0F9DCDC2A7348C9A138C1C04A32
+:1030F00007E239B443D04708047D841A81F385A1DF
+:10310000AADC95D47E2A047C0A46A78FD1550B678A
+:1031100052DCB53EBB5F16C51972AA043D2CDD6BAF
+:10312000A4034AE7D256D30F4BBCFEF4FA8C02CA72
+:10313000E79D819727049CF5F3E7E97170CFDB6188
+:10314000C44B3CDEBE2D5ED614C77F57F2EDF06255
+:103150009B2177A4519C540599E2322F660F373397
+:103160001C9ABC8C9F19D88DF830A70938DF134FF3
+:103170008FAD7510AE8AE1DF1C6F5821FC4C93F2C5
+:103180002B99CFF0DDFEC0A744195FDB9A44FE16F1
+:10319000CB641A1FF6CA0328AE105267F3BAB737CA
+:1031A000DB92E93CDF57F566A0F3F2DB73E40194B0
+:1031B00017DBFE8C696EECF920A40ABB3993F7612A
+:1031C0003797706911A5A2956011ED6189EA835660
+:1031D00098E3F0A94AD49E3E2339EEB962A2FE5B81
+:1031E0008A73193E694A86015FD61223BF23180FDE
+:1031F000E5A37C1C4CBFCB4457824E42AF4BA195FC
+:103200001C5FE932D510DD68E72DD257CD06CA47DD
+:10321000D567FF742ECBAF7A1BC31D5608BAD0F307
+:1032200082D6264187F1F4E3F21AE9C72A0D3489E0
+:10323000FC96E01F7D1DDB146DDE2C0954967BB6D9
+:1032400001C467D6B8F1EC243C49DE78045F3A61EA
+:1032500036D07BCE123BE7B1413ACAF8B74E00E810
+:1032600013734E217EBD675DE777A4F30FBF239DE7
+:10327000EBF267AD57933F45E25CE429A46B8A1FEC
+:103280004DADEA04FEFE0ADC26A247A4835959C5C7
+:103290007CF4817F76911CB213BCAAD3A8DDD5A99A
+:1032A0004C25FA9D2EBDA2B8709CB587059DA37EC6
+:1032B0007989EAADCD16A0732628674C3FA2794BD9
+:1032C000EDEE952479A481E369DD853E943B1447B6
+:1032D0007CC5282F8A3A8D70CB8D97EB3DC0B127E6
+:1032E0003D110F47D7040D8EC508C721DF1E8E364E
+:1032F000AFD0C3E92542CEBE98FD537ED57D589C04
+:10330000AB495780E1FA852AF4F274E97898E4CB66
+:103310003A05E50BB6CFD0DADD25429EE870CED572
+:10332000E0ACCB9375F32183F8DE4DF2C44970FD18
+:1033300088F5765B9180334084F39FA98AE09335CA
+:1033400056F0529CB6ADD4E9A57861AEA2C1B7499A
+:103350008397094C04DF78BA9421A68EEB4B8DAB92
+:103360007F5BF8964ED0F4643F283E1FF8AE4B4981
+:1033700015FC3654C0C7EA8CF0B9E6A61C8B77253D
+:10338000F275470EC21BDB9B5E17F0FEA5D67FD5FC
+:1033900018E07A53DFD5990CAF9C859944CF4DD670
+:1033A0003695F2584D3AFD69E7C25C9A9C9886FCC6
+:1033B000BD00DF5F8DF289F290A92501078DD794BA
+:1033C0006F0189F7BFD99B68FF0E9FCD20072FABF8
+:1033D00031C235250E8E49DF91FF7F3CE1BBF1FF05
+:1033E00076FA15FBAD1906D0C979C89083E0642B35
+:1033F00099984C74D4D2BA9DEB32849A7271FF0FB3
+:103400003B85FDD5D23ABBD7F351214D2E6CA97324
+:1034100070795F9D9BCBB6BA4C2EEFA993D97E698C
+:10342000ADCBE3B2A5CECB65535D0997ABEA14EE05
+:1034300027ADCDA860395C051CCF5E99F239E7DF76
+:10344000E3E7CB518D7A6C706DB201EE7D6618F5B5
+:1034500055BA62D457748E29B6DDE51D65684FC92B
+:103460002B30D493E48986FE5326047E3981E48090
+:10347000A7324E0F223F8E899EB36B6915DF4BE951
+:10348000F0D3F59353E3F33556EF00CA3B395B05B0
+:103490009F366B765E13C111CB6405F8DC8CEDB002
+:1034A000E40D01F1FF6AA6F38771EEFE488B1DD98A
+:1034B000D7286427B4C8C28EB78238F76BCBF4879D
+:1034C0006BF07912EA2FCAEBDAE6A6B05C78D8E3A3
+:1034D000F4D239DB96D6656E5E8F579CA771E3BF39
+:1034E000447980F8F3358EA1C67339D6B39C6FFC4E
+:1034F000754FF4DA9491508E9C2167BBF32FEF6BDC
+:103500007429F22FF778043CED3DC8A3D6387BD957
+:10351000A9E55F60A02F61FFA83D25F20BAD717199
+:103520007BF4C312E66FDE9A2071FF3F4F9085BF98
+:10353000660903C96B9717DF8FF53B14F17DE8B976
+:10354000CE8F3F3E4F8C7C0A2407FE3C019F2B4FC1
+:10355000083B254916DFA1D84051583E81C887D085
+:10356000591FD237A95ABEA75BCE908888A13BE7E6
+:1035700019FEAEC88BD06716443F96E8FB17C4BF50
+:10358000FDB66523F9C3C37A69A7FC5002B9E02AE6
+:10359000D1BF1F832E4F3180EEBA23FC5C2589E119
+:1035A000172678359AD6CDC8C5E7A95E8B173100A6
+:1035B0001525F25E3A5FB14A4965FDBEAA446E2701
+:1035C000FEF942717A091FADF955ACAC93867DC8FE
+:1035D000A2B7B1C4C676BA8E87246D5E444F679594
+:1035E0000E67ECEFCC9B11ADE37FCD6336725EAF1F
+:1035F000E5AA4738DFD732EB3F38DFB73A6B7A1EA0
+:10360000C9BDA492E9C7F82097861F660DD2237919
+:10361000C6FCDEE9D3A2CE70A0F8849607048F31F1
+:10362000CF6791FD86F92F349E60A0D0436051F89A
+:103630007B8333E95BF0B5DEAF673E50F5EF4E5765
+:10364000D2F9E0268F90A34DE07D3340F55724AFAB
+:103650002AD3F38237E9BCE9EA8116C6CBEACCD992
+:103660004DC28E177E53936725E76DE3F5369DD7E0
+:103670008C95DB745E3356BE37C9B37BD5CB59010D
+:10368000739CDE37BE9F1D34EA1FFDBDA4CC2B5FAB
+:10369000AB8A392FD56CF13B485EACF2DC678AD53A
+:1036A000730F2881052531E793AC99B3F83D7BB6BC
+:1036B0002FE1BAAE50948544DFB8FF5EED81F59AF4
+:1036C0005CDCA8E997B3ED7393D6FF01ADFF66D23A
+:1036D000EB23A2F8193EF4F26496CFEB441C8379F5
+:1036E00020665EA524B082D615C5AB390A17A4D3CF
+:1036F000E1F957B0DDD1B06E7632E169E7FADED795
+:10370000A3E7D5F57E7A1E353EBF6EF3980DF0DF48
+:10371000A3C985175C0B2B1F40D0EC6C13F4D4B0FD
+:103720004EE891E14F887D9C4987C6F5EE6CEBDD54
+:103730000E8AEF4F91C56E3AE17A465C7D405CFFA0
+:10374000DCB8F65171ED0571F58971FD2BE3EA578F
+:10375000C4F59F1D57BF36AEFF82B8F6DBE2DA979D
+:10376000C5D5FFCD884FDFB56989E0188F3FBDDF34
+:10377000B9E2EF5D5FC57EA2A3E13083E945A7B75B
+:1037800073C543D4DEF5339DD94A46B17CDF81F65B
+:1037900015D9433BDB2ADDE27C4760E56E8D3E4870
+:1037A0003F58368879D0CE4AE6F89CD36390236799
+:1037B000C3B709328CEDB17668EE85C7F7D9E93326
+:1037C000A4D917BDAF5BE7E32913FC27490E414895
+:1037D000F899BA5DBB4D15FCB34D5D50B99EE46DD3
+:1037E0009359C49FB5FB50E86E1D11270F684A38E6
+:1037F000C2F18426CD4F68D3E4C95A4D9EDCADF9A1
+:10380000094943839B28EE9B7C988FE740B3AFE048
+:10381000AF0B103FF797166FA3EFC7EE1E53F2F8EA
+:10382000C35877FD5D827021DAE9635B14B259DA1F
+:10383000948C243A4F946272B4939FB8AAB0CD3F4F
+:1038400014FBADDD7FACFD79C4B39C69F3A2CE0758
+:10385000D9D265227A837C2F7F9786EB54C9C6B272
+:103860009677D5253A77BAF60AB7898CB0F419B2AB
+:1038700099CE11F79910E85B8AF018DC046605EB25
+:10388000196A98CFE25C532A0BFFEA196428DE6FAD
+:103890005716C1EBAB66DB7EAAF68C0F90B438DD11
+:1038A0007995FA38698234E887E38EB245ABAB8FFD
+:1038B0006CA6F3D04E49D4A73CF3F8FC95F9D1FAA5
+:1038C00098671E1FB812DB5B0B0799489EA67B52B8
+:1038D00013DE137375A9909FDB9B170E4EE48FE9DF
+:1038E000A53C13383021E76B25D1D4042C876AA579
+:1038F000AC3DCF14F52B35B8C9B55ABB4794177AF0
+:103900009EF8F1E794BA753B7B809F8D6CC877F683
+:1039100033D88B5797F6622FA279CCF1DAAD56796E
+:10392000009D23DCDA6C03BAFF616B3688EF905799
+:10393000D9F8DC2858DC03AE7145D71D5AD56F1E67
+:10394000D14DC80486386EA6065FFB4493768EF28E
+:103950009B307DC7B755CBF36C8588DB9D1F8BE70C
+:103960005FCD27BCEA78DE57FAAFCD449F1DD90B57
+:103970002B37E27BEB1ACD1C3759D798CB744EE32B
+:10398000907D746AC52133D9ADF9D06E263B7F1482
+:103990007D793D84AE400A70D9AEC9E7FFD4FCF80A
+:1039A00061A0F0F341D0C5C0F9B438F01382CB1058
+:1039B000126D12F18FDBE4C07996EC4BAF48A4B7DF
+:1039C000EB4AF5EF7AA1C652ACF91732C3B78EF8BD
+:1039D000281EBE74429FE38E8ABF9EDA9D7B5F0DD8
+:1039E0005F86D5DD6F18E993F0363B46CF6CD4E0A7
+:1039F000E7F6FA15C2E1B5C581167A7FC9A6BF1EE2
+:103A0000207354565533BDFF14E11D9F2F0C07A79B
+:103A1000D33063BCE14AEA3FBA76DB7E8AA7E5058C
+:103A2000EFA8EC8FEB1BAE54577A888694C0FD3418
+:103A3000CED0CE48850BEBCE4DAF86B3783D6379C3
+:103A4000BC5C7D3D480FD54C476E11C7D7F04BF895
+:103A5000A773CB0B370BF8607B16EFCFE2CE8A5DF6
+:103A6000FFB669FDF8BB8578BA68D5E0F758148EC3
+:103A70006035FA358F2582A34EA73A3C6E78A26B4B
+:103A800015E53AE7873A5F2439E8DFE49EC6F2B0ED
+:103A900038F024BDEF6BF337701E7057275D47D4A5
+:103AA0000D1FA7D249D7BB603FE569C2FBD615EF12
+:103AB0005772BC782F88B8589C3ED44BAB129F6786
+:103AC00010F7E58CDB6BB493915E958D9E587A353B
+:103AD00073BE33A4E9935013D22FCDB742D06F48B1
+:103AE0005DE64E44678F687A658746B7FAF3A13D75
+:103AF0009CBB3C54DAED27664A46781EEA8DEFD32C
+:103B0000C0CBFC807C7084FA65101F607DF00A37A2
+:103B1000D3A7CE074BF6FEF500DD67E3F4C905B188
+:103B2000F7D745343C227DBE43EF2FD9D475807C36
+:103B3000C5C12B047D7E4C77871545E90CFDC7F781
+:103B4000A89F4E3FF1FB78571B4F2EF67F4C785CB9
+:103B5000B829C8E321FF1C2BE5713AC349CC724A4E
+:103B600025ED676B1BB8693FF65F1474905C3855A0
+:103B70006B62B8DE981F5E65C6F2FAA160A5EB869F
+:103B8000AA33916C72298F6BCCFF0D6B33E20FE976
+:103B9000E76F344F91276013C1EBA08DE5690F7477
+:103BA00011D57BAA0EFF157172D73CB1177A3ED79B
+:103BB00071D7162B8E8945DF621DE7D84F8F379D51
+:103BC000193F1DC5FE434BD36CFD9CF00CBA8F67AB
+:103BD0003BC54F11AEAB9A7AB7572F58FCB4F9A436
+:103BE000889FAE008E03AD4C196B4A44379740FC5A
+:103BF00074CAC444F1D3C87B063B735593900B3A07
+:103C0000FC86578D4C16792948A57C891E1FD3F751
+:103C100075B7664F3669706B21B8313C05DCDA0840
+:103C20006E0C4F1D6E33843F425F8853BCD66316C3
+:103C300079B1910B3651BEE054A6C893D767DB44E7
+:103C40007B8EC82F9C411F9931F634F2C19A667160
+:103C50009F08BECF79B517B30F3886509E33D3CCAB
+:103C600071DAED9EFB6AB6733D99F9CF0A6A5B1E65
+:103C7000CE3BFCC3B9EA027A5E62E773F27A3EA7F2
+:103C8000A5AFC8E7B8F2B47C4EDC7C76B8A9B28D9B
+:103C9000E6CB137E4B8F74ECD3F2115A1E2823DF30
+:103CA00098AF70C4E52BE2F3956B9A17ECDF2EE228
+:103CB0002B2C9F87FF7824FB63F1F3B8671AFDB7BD
+:103CC0003523753FEA1147A2EF1852AB8CF4D8A206
+:103CD000E1BBA1AFC8479C6D7C284F36F8552D79C4
+:103CE000E71647D0FB911FEA4ED03FDE0F3D1FFF86
+:103CF000D6CDE31BEF074CE0DF6E99C8F11441DF2E
+:103D00006B9AC5FEBBE3699A5FA59F3FD2C7B16AB4
+:103D10007E1CD773A2724ACF870D75DB985E876AC7
+:103D2000F74535FC7B4A68650EE5D76675513E72EE
+:103D3000E80E89F3EE439D7ECE43746C98CEF9F184
+:103D4000BEC981A727C6C49F76B87E9AC9F9022D3D
+:103D5000DECFF7E6A0DE53D715762A64EF8E04BED9
+:103D60006727392E1F107F3F4E7C7D4E99D0C39917
+:103D7000D741C27B4F3E9F28DACFF4DFAF6038A136
+:103D8000BF9B2CE4ADA2D7FFBFE4A976B61DE2EF3E
+:103D90007D4EF94093B3FF0997A29C3D5112389E86
+:103DA00050CE5ABA58CE8627289F919E5C4E177DDA
+:103DB000101E6E4C7C3F8F5C76A9E2E16981877CA6
+:103DC0001D0FF75C92F942C4437659223CA05F452F
+:103DD000F06AF32983A85D29510653D98D8F1F26D8
+:103DE000E68B5965C2EEBB58F858A7E1E35EC207FF
+:103DF000C769642D4E93C7CF9B357CAC39031FEF49
+:103E00000B7C94E8F878EEBCF09151956168779757
+:103E10001BF191EACB35D49DF9467C240F2D308CD3
+:103E2000B7BC4C16F7240D9C68E877263E8CFEC084
+:103E30009DF45E2FF6E8C04067057D4B34606E7BD5
+:103E400007C9E64C7F5B0595FA3E37C7F9737AB927
+:103E50005CC35FE6D4C4F85DA0F15BC644E526030D
+:103E60003D7C2F317FD668FD979728B794C5F2F334
+:103E70009589FB2FD1FADF3641591CDB1F7FD64BCA
+:103E800031F6784FFB0E242BCBCB78FD224FB6A317
+:103E90003E95F3663B92E476CA57ABF54EC3BD75CB
+:103EA00083E937AC67FEE89B0E95CED9D13D4168DA
+:103EB000596DBBA35FEE1A6CDA96317C25C1B1A9AE
+:103EC0006C88B8BF7591FF6DCAEF28EA09ED1CD266
+:103ED0007CBEEFC814EE63A27BB2C09D714EF92385
+:103EE0009467E25EB7C120BE238620EB41C90FE98B
+:103EF000F4DDB205FC225F4EFDC5F785BCF9140860
+:103F000073DD0511AEA7697EDE0365393C6E3AC8E4
+:103F1000260124AF89E4A8CEA70E4F90E9DF53EB2A
+:103F200036AD245FCE0250467EA073207FCF0B9526
+:103F3000A0523ECB040EB6334DEB0F7CCD793AFD4B
+:103F4000FBC397FB88EF0FCF717FE7DAAF91EEE508
+:103F5000F344EFE56BD4EC01FD5E3EB532C8DF976C
+:103F6000AB2BEDEE06CF99DF973F3A31B08BF0FDEA
+:103F7000B7A4412191640E4E98EDBAA0E3872FF2C9
+:103F8000F8AF5CE4F1DFEC6DFCBBE9D752CAEBF9AA
+:103F90008F123F37B88AD9EED4CB78BC5DA12811F7
+:103FA000EA27395E1BF0619FA83DE73C6A627FA863
+:103FB000C124CE9FA9EF99D8EE827C41074E19F219
+:103FC00072C645C7717A838345DC49C45FEAFF74D2
+:103FD000D708B2BF7F99322B9286E31D7C55D87FDC
+:103FE00096A991CD74BF73FF349B773BF2DD3DDA28
+:103FF0007AEDA513EEBD137FBD798A90172E8BF74E
+:10400000F2023EB7343342F6A3ABD82253AEC01906
+:1040100097D76CB5B42553BCB275C77D15A3B0FB5B
+:1040200063752FB91B137CEFE9D4F29A23A5C472F0
+:10403000F09F939244DCCB67BC4FD85AAE9D2B497E
+:104040008554B2232DFF52D2129D07D04B7DFE2204
+:104050004FA48ABEBF8ED0256E88E7A292EAA464E0
+:104060000F9F8BE824F8567AC30EB27F1F5F10BCF7
+:1040700035F6FBD3D61270911DEF9B22CEC36E5046
+:104080002417DDAFF160C4C2F78E3FB8E8E9E6144B
+:10409000ACEF3D6A76133C5AFDEF3993B1FE388E92
+:1040A0004BF2EEE00E71CE529D0FA16108BF56F2A9
+:1040B0002AB1BE5B11E7B2D9212BD6AEEA43F8FF95
+:1040C00075725F016F0856D3BD9DEB5226F37D9646
+:1040D000D973443C78BA74B483DE7FB0C4CEF81B85
+:1040E000A29DD331A9D57C9F65DFF9C6733A0F2E07
+:1040F000EF5409BFEE52BB5BE5F3974ED7587CDF18
+:10410000F5A8192456715D3CF974C929D6E5157EC8
+:10411000EEE37258A5FB8EFBE27BF56EBE35D170E7
+:104120001E68F726E19FA68D777A91D271BD71E75F
+:1041300085F475B5E1BAE8DE63D7508E4764CC31BB
+:10414000AE2F2DCE6F70C6D5A79677DFE3339CF0E8
+:10415000FD85FFA785AF71AB574EE47FB6D64167AB
+:1041600055CCB904670F71C09AC982AE6D592F380A
+:10417000C84EF9C27FC4433878E59F073EBC97CA52
+:104180007FFD6ED75284CFEFBF7E73C793B4BFDA83
+:10419000BB0F11BDEAFE189FC1C4F5BC586D63B8D2
+:1041A000F96768E7397D1D2F587DDCCEF9A5B5FB91
+:1041B00093B87D64398492B07DA445C9BA99E8AEBC
+:1041C00053F2D6CB3488388FA8E37FED0D7E138C65
+:1041D000213CFA25BA0F639A76BE76C3229009FF76
+:1041E000B645ED7C5EDDB75C9C57F729D5497CDE92
+:1041F000748E99CF87D4575F73F930ACEFBA5CDC1B
+:104200004F3563B9328FE75704BDA475169B9713DA
+:104210005D6689FB9AF4F3A645D0C5DF7F8CF4B6C2
+:1042200077D848DECC4700D3FA5A357C69718322AF
+:104230005FA74AF6A4CB6BC463461CDEE2F1BA4228
+:10424000C7E34818497894A12D99F4E14300ED742F
+:10425000AFC086E54FCFA3F36C5FA8690CAF9EF8A3
+:10426000F91DB4579511740F8B83CB4EB457A9DC4D
+:1042700085F62A95AE60C575CB71DD7BDE38F8D248
+:104280000F71BA594AF5957444AB48CB7B81BA7427
+:104290005025AEFF06E25E51DF4289C4777D92A1D0
+:1042A000BED66389FE3D00FCD595A5FF7D80D35B1E
+:1042B00094A108964C8B968F11F559E487C4B4EFFE
+:1042C0009E69EC5FB63F66FC81B8DEC5366E0FEDC9
+:1042D0005BBA45B5C4B43F87F572805735FBF1FA38
+:1042E0009D66FFF604F2EDDD7261475AFE052AC9AC
+:1042F000B52FD14E23FF5E322B2CDF21D72227BAD8
+:10430000570F00E561AC5F2E1BE5EBE51A5F58FC2B
+:1043100015A0E5C7E01B3DFE803F7BFE388BEF63B9
+:104320005A35C4C2F70FA13EF0F696AFB3782C9F72
+:10433000C6DEDBF5AC2EBF87C1309AFF4B28FF43AA
+:1043400005F341CCBD0DC4F76DCF5FB614E7F11D89
+:104350004DE638AAE45A9FC2F731D535B13C7F40CB
+:1043600009FCB63CE67C4963FAC242922FFA3999BD
+:10437000E8BD47D798BFCDBDF71DD50780F4C297DC
+:10438000485AF65EE8B0B16EEF115AC7EABA762E17
+:104390009D6E85858DDD12E4B8CF154AE04FB43EA1
+:1043A0007B26B6C7F089D58DEF19FC0EE37D9CB254
+:1043B0003BE224B86F28F9C049F3B71E167CBDE173
+:1043C000F0EC24E2BB56EFA124E29B2FE8E2C7EF1A
+:1043D000C0273EE5559661BBDF48BD9EE8674F4369
+:1043E0001ADB150797DF7F2DF1CF8DBFF801C3BB17
+:1043F0009B6FE0E14195CE18BE818799AEBBF9462F
+:10440000ABF7CC377F67BEDADDCD37A2EECB074303
+:10441000FDE04C63FF6EBEA0F1912F1EAFB073BBE9
+:104420007DD2C35BD418BE3A49F558BEF909F24DA6
+:1044300002B93F7D9246DF17986F522E32DF0C9DF6
+:10444000A4C9CFEFCE3763275D14BED9633A1FBE30
+:10445000B9EC4CBEA99AD4F7DBF34DAB3BCCE7E902
+:104460005AE79813FE7D900F347939757EA0B28D8E
+:10447000EC1A45DCDF374D9A99E5F3109F497487B4
+:1044800034EA4FA1CF0F5EDFFD7D06EB67FDFEF541
+:10449000F58450B293160BBAE9AC1371DF6952F987
+:1044A000B4C5A477E93B024A3553F694EC02D4FB39
+:1044B00032D985D05EE1C179365499A04DA62D0739
+:1044C000AB87F1F861B6CF8668717FA7942FBE677E
+:1044D0009A29FEEE85FE5D4CB562BC5FB6FF59ECD5
+:1044E000265C770AF931EE12F17750164D8AD7BF64
+:1044F0006887E0FA3A07DA984E362857F71A273ACB
+:10450000E35CB52F98302FF9D6249376CFBEF233E3
+:10451000A2B3DD6F6C49A673127B24E0F339F383F9
+:104520004FCD23BE73A942DEB4AEF833A52361D7C5
+:10453000B41F1AF5347C6AD4D3F0A9514F6BF51E21
+:10454000E58D7AC2A8A7B57AB79ED6EADD7A5AABCE
+:1045500047E5CDA7063DBD61D2A70679F31ED5CFAD
+:10456000414F1F9E7471F4F4A88B2C6F9EBE70F2A5
+:1045700066DFA4BE1743DE1C392F79937DA6BC39B4
+:10458000743EF2C6B5B943A5F4CCC21EF8A056C31A
+:10459000FB5B65CADB343E949C5BBC269EBE3AAA9C
+:1045A00017AEA6BF2BF3A557F87F3DBDEFAAFDD5EB
+:1045B00091C6183FDC65E914DF23D4EEE1E7B76C60
+:1045C0007E95E3B1675D2F5D105A74A65E45BBC84A
+:1045D000C1F4EB35732EFC7CD7D13A47F0DB95CF95
+:1045E000DEC1FC945C6E9C4FB77F3BAA6D669EAFAC
+:1045F00044C8E99EECA19EE6FDA05C16F7FFC5CD80
+:104600001F4FBF489FE9938B981E2D742FF8179D5D
+:10461000C07FA7EABF4E6EFCBF8A7C49E9C51193F3
+:10462000CF834EA76BF84CB06FEFC5DDF705E3CF36
+:10463000E993CFC38E3E4CFBEE9B70DFDF67385EA5
+:10464000B47D5F30FFE1E6F3C1F7BBE5DDFBE6EFEC
+:104650005132B47D6FF8E735EF515C63C3BFAE7D77
+:104660008AE21AF77D9DB78DE21AFABD726910FDD4
+:1046700091F5EF8F102E2EBFF89E24634ECC774518
+:10468000C0FE7DF4BB13B2377CDDEDFF2BF7CA9182
+:104690007DD2DBBD72AD36635C4F2FAF2A17F64A71
+:1046A000AB691DC72336A05F558F78EB9823E211C5
+:1046B000AD68A7B0DC9953D0AB7DB4AB4EE1B85335
+:1046C0006B9D9FCB7BEB6670B9EBB5256524777D41
+:1046D000AF2D62BDE7F3FAAF7B1881E4AEF8D049A5
+:1046E000CFEFF5E8FE90B05FD2C87EC1FAC393D792
+:1046F0006F8D8D0B8CFAEFE15BD481D178555B66C1
+:104700008CDD23C7FA51A012B944FD28AC1BEC9AEA
+:1047100011EC47ED26BB06EBED934718EC1A7D9E96
+:10472000B566A821BB66ED0EF38C4476CDACF2C421
+:104730007E14D6390FE27039F8FB7F49FBFB5F51DD
+:104740007EE9DDAEC99D7271ED9ADF4FBE30F18713
+:104750006E3ED6EC990714E50D4DAE7C47F9B1D10C
+:104760004CF1E36F2B3F4692FCC837C88FCFCE4742
+:104770007ECC2A771BE2A20765B5CF58B2D37798D3
+:10478000A15ED6F42FD63BD1AF31219C7E5221B110
+:104790009FB3C10BFCF7FDA64BF35F267AD8BDC8CB
+:1047A000CCDFBB3FA88873220FCD11E7A91E5E5E48
+:1047B000309B3E235A9772C3DD4914D72E17F70456
+:1047C0004C97CA39CEFDE00C61E7643BDB2FA7FDB7
+:1047D0001FACB000D1D5D9E2DC146EE778B5E6475E
+:1047E00081B499FD0ED70F2D6E3AAF1A1FBF769682
+:1047F0007CCCDFCD83F40A7FDF7DB6F8F5B78D5B27
+:104800000F98F29DE3D6CC8F35CF0DBF41759E49F1
+:104810009F4726CBE25C620F7A2C9E9F3BAAA7A7FC
+:10482000457A3917E524FB29E61E59FD7BD659E563
+:10483000621E27D94F8551BAE8A82EEEF55EDA94AC
+:10484000DA678EC4E685522CED3C5E4AED3E7EBEB4
+:104850009ECE2F90CCB27859AE3E5E89F239C178A7
+:10486000FBEA8287092EBFAEAB3D4C71EA49964EFA
+:1048700089FE9EEBDE3A95EB7BEA9AB8DC55D7C60B
+:10488000FDD6D76DE2F2BEBA103FBFB7EE31AEDF54
+:104890005DD7CEF5C773C53C132D211E6752178E09
+:1048A0001FC30F659FE03C31782E8DA886F6096FF7
+:1048B0003619DA8B3ADB0CF5BEFE4D86FE7D66843A
+:1048C0000CED6F950502538AE85CC363867ECEFCCF
+:1048D0007643FD5CFD850BDD6F654AAAE51FC8AF19
+:1048E0008302484F4867E9B5B2CA79F31AC197FD08
+:1048F0006BBD61AA6F71D998BF75BAE433CB26B18D
+:104900007E53CC3DB51D2E717EB2A1AF88A734FC7D
+:104910004CD4B76489F391C3AB447EA461A0B8972B
+:1049200044CFC36F7169F793F8C43D1A83F223FC37
+:10493000DDED20EDEFC139CB45FECC0D6ECECF378E
+:10494000D481F67D6284F31D1960F68AFBD5159932
+:10495000FF9E920542F5385F43BE5BBD85E44C3057
+:10496000D56BF6F29F960D99298F48E2899330ED29
+:104970009ADED1F2F2491F009F3BE886CFE7E27B47
+:1049800084DA2EBEB7A97F6D17E7E3B6FC42DC637D
+:10499000130FD78E5F7CC5F72A6DFDD95759C4D444
+:1049A0005BBBCFED7425C57E8FB6A52695EF5BD892
+:1049B0005A9BCBE728B6D688EF8D6510FBDDB2C8D1
+:1049C000C6E730B6D69ACD24274F2DB2305CF4F529
+:1049D000C7CFAB7FBFB94E3BD773AF76AE67AD766F
+:1049E000CEEA6EED5C4FB376CE6A8D763E76159D3F
+:1049F000EBB1133CC5B99EADB50B14ED3CAB7E2FAE
+:104A000003C35742F8F2772A56D86B1A07F4870C7B
+:104A1000196EF1DFC7665425C79DE7319EB74AF589
+:104A20000D30D49DF9C6F356C9434719CFA90E34AA
+:104A30009EEFB1798CE77A2CCE4AE3F9D058FA444C
+:104A4000609A566CAC27FC77FF7D477AD88FFF7E43
+:104A50005C37FD86F47340129D4349637ACDAC12F6
+:104A6000F499A17D0FE3864E2E53915EA874529E59
+:104A70005DA273902AD351F4FB37A5577A3ADFBF72
+:104A80000720AD4CFCF700F473087FD1ECA8A553C8
+:104A9000944FA71445E7BB7F8A723CB6AE973DC9D9
+:104AA00085FFADF2FF01C18CE32B00800000000008
+:104AB0001F8B080000000000000BB555CF4B1B41B9
+:104AC00014FEB2BBD144A35934B6865A481A520DCB
+:104AD000A4B06D37A225D2D5869283C8163C78E85B
+:104AE00021879CFAE358E86D635B904A24A9422F22
+:104AF00052C8C11E0A821EFC03621B7A8E680B52CA
+:104B000029C18AE7405B7A11D23793AC899BC47A7A
+:104B1000E940F2F266E6FDF8BEF7E6E50D68798158
+:104B200090A2DD137D40245A2A3848065468B930D3
+:104B3000305324E9A2FDB5AA94359114C0A9095CAB
+:104B40009ABA1E2F4912D9C9163BFDD4CECEEF8D8D
+:104B500031BB0126252EAF1F39000FB015B3E51666
+:104B6000FDC0C20E9DABC0EF315B0E7E96DC49A549
+:104B700032CA4D01917D69BDDE4BC02CFB49F17AF3
+:104B8000C73D0309F29F3180FC30BBF3D0CD745791
+:104B9000343BE5A33C427B4548E42F5284DC078646
+:104BA000AFAC81F6E7AFDE17258AFB6109B84CFB95
+:104BB0000BF652EC11DDDB1AEF945F28CCCFB4FD7D
+:104BC000299DCF5C1121325DB71F962855D860AB67
+:104BD0005C237EA25255A755A1CF0334E894F70C6D
+:104BE000D347EABAFB243029535ECF0FFC1B8591D3
+:104BF000BA5D805261FBB7B51ECF71376D8410AAC4
+:104C000088751C15B6EE36CB3F866FA360673821DA
+:104C100030BED43D21E7A738BD5F96BB183EB1A892
+:104C20008B25B2478C508F13CE3DDD8D73FC7D6795
+:104C3000FC7502078683CBA22173B9650C72796C6F
+:104C4000F8B83C3246B83C34142E4BC61897408A0C
+:104C5000D7B3D3061E2F63C47763C1F6F1645B59E3
+:104C60006775C78484F7ACCE432AB76BBA17253F64
+:104C70000D7C115DBC190A3D6F2799FDBB27028F82
+:104C8000B91ADDF4EAE166FBD56753E7E24E1B7320
+:104C9000BBAFECEDCF5D1D486CB6F0FBB2D6C740A4
+:104CA00096E711880B58A43CBC0EC529D3FDF4B679
+:104CB00093F7754871E49C0CDF9A0B3F4C1CD43F72
+:104CC000CB696A19829CD524997AEAD46F8F42F90C
+:104CD00034F45560FAE320AB677A223FA8138ED5EF
+:104CE0009B9FE786C92EB5232288E6BC5E6B369E65
+:104CF00097892B202982DC027F3B5C8F6BF618F2B0
+:104D0000F0B960E5DF7ADFAC3BADB4345A7BA2B4D6
+:104D1000125D898C4675D2D66D9C07A70FFC7D77F6
+:104D200040CB33BC17C80FB8433CE7238994AB9EF4
+:104D30004FBB3A997974D7FACF9B2C3B12846FF909
+:104D40001F7DD8672F3A58BD9692423CD7228FF5E7
+:104D5000DA9C5B526F39D97B44B8751EFD716B9F2D
+:104D600056F35991C83F9B4F2AF96FC1F737C67761
+:104D7000B59FF745AA6B46137CAC9FFB891B8D4200
+:104D8000F547904B116FD9A8A0E4E9FC97DAA17020
+:104D9000F796F9D0145F6DE8A36BCD73675B73551D
+:104DA000E74D1041366F7E0ECDBAF32DEA6B4A9374
+:104DB0004773EE34F358AEE24C567122DCFA3DD71D
+:104DC000EB355F1BEA488867FBE6EB797DD38E7F86
+:104DD0006B1FAC2475779EFE1FF0691FBE1B8C8F66
+:104DE000B3EFAF1D6F569E8EFF334FD6F3A23957E8
+:104DF0002E88F3A2F74CFD2FDBA790A6F00700004A
+:104E000000000000000000001F8B080000000000F0
+:104E1000000BFB51CFC0F0030977F3A0F2BFA3F161
+:104E200057F1A3F2CBB851F99E68FC2634FDE7D1C7
+:104E3000E4591820B4233BAA38B158988381410E15
+:104E400088353950C5F3A1E6D6002DE807E215AC48
+:104E500084CD7A27C5C0F05F9681E12890AE06E246
+:104E60004B4036931C0303AF34038307104703F111
+:104E70003B190686A940FA25106F9086E8E3048A5C
+:104E80009D9421CFFD6D42E4E91BC5D4C1B7955077
+:104E9000F993B51918AEE93030A8E941F8E791E483
+:104EA0009D806253B421EC70550686BDBA0C0C8708
+:104EB00095B09B1B0194DF07948FD0C36FBF831104
+:104EC0002A7FAB352AFF8B212AFFB2272ABFD61BA8
+:104ED000955FEA03A10135720CD6D80300000000EB
+:104EE00000000000000000001F8B08000000000010
+:104EF000000BCD7D0B7C15E595F899C79D3BF79987
+:104F00004972031708308941A2061C204040C44959
+:104F1000081A6C8A17A44A5DAA576A2D228F2B6241
+:104F20004D5D6B26EFF0B08DE856FE6AF5C26A97CC
+:104F30005AADD1D296B6DA26802EB61422A5D6B6B0
+:104F4000ECBF415D6D5965A35BD4B5B4EC77CE374A
+:104F500093CC5C6E1EF6F1B371BBC337F33DCE77D5
+:104F6000BE73CE775EDF7715D107FA250067F08F25
+:104F70003DCF170160E6C0335A01A57239C0262122
+:104F800068848BD8F34FD2F2CE30FB06567CE9947E
+:104F90008176578340F59F2F6A8DF7B2EFED93BE70
+:104FA0001A8732567FBC40F59D7ACEF30690000AF0
+:104FB000004A3A56AA09D6CFA6318D2AD66FD7B75E
+:104FC0002D0736DEA91205241CAF287BFBD67A807C
+:104FD000AEC90097C056B538C6CA47256333641BAF
+:104FE000A788C671CAFEB8085DA5407F67D8FF369E
+:104FF0007D290909366ECBA4AF2E47B895AE9B40EC
+:105000008F00DC3626093A7B3F0D449A9752618126
+:10501000C9CAAA6EC5AD29678FD38E7829C35E3BF6
+:10502000E24B2303EF97387861F8C8C00BC05C00EF
+:105030000DA67759580E00B5CFECD7B4C7D7E223E9
+:105040001BFFECF9F3F1A7824E7800B5239E880C84
+:10505000C0B3C9D7D725317C5B45603CC6AAE4B054
+:10506000712A5DFD648ED73F4FB9C3B3FE5310CE96
+:10507000029A8720BBFACB8467965D6F169B393EF8
+:105080009D79E5CCE3E30CD7FFE588E202ACDF11C4
+:10509000B7222E7A942D0FDE83767DCDF4D61B0CAD
+:1050A0003F21C4CF4CC48F15477A74E8580AEB0DE2
+:1050B000356C3E0516F449B94436268C02C8C77FC4
+:1050C000B126B2A65722BD8E32595DF67D74CC6AE8
+:1050D00090D8FB31F3D282CC9E1178487B23040810
+:1050E0004DC9196A6471BAEF9CD1DECBE8F614445D
+:1050F0003A36B36793CCFA45BC1D8BA41F632035A9
+:105100005C9C7AA4979523960C8DE5342EF1E1ED05
+:10511000D2F9C66646D29B6DFA6FAF57E9D95AAF3E
+:1051200041971FA0B93E4ECFFB4377FD1BF65F674B
+:10513000F9353F7BCA9DB73E85E52680048E1789E9
+:10514000F1FE4156B5C7342C8389788F94F0E74B34
+:10515000881706E7571926112F3FB0F1A44317F11E
+:105160006B93B13407B2E0D379864ABD7C16D08305
+:10517000ACE540D91FCFF3947DDA584F7D8042C211
+:105180001B9599A85825707914917BC0403819BE99
+:10519000B2CA055BAE48D2B4BE2E36BFF06CC5D8DD
+:1051A000C99ADE2D78F96B8CC0E9A34C50E91983BC
+:1051B000BE7D67102F8698DECCC60A4E2BEEEC8A99
+:1051C000E1988A3189AD63D097D6F2B2F01794CBCB
+:1051D0006FF53A70177FFCF891A4EE5422CBB87F9C
+:1051E000B0D7EF92D38755E47F759A98489721BC42
+:1051F00056824D1EB6EAB288F3FEF8E01E7ABD8EE6
+:10520000DBFCDC0A2AD59771BDCA07D6ABDD60EBA3
+:1052100085FC53CED7AB5DB6D491ACD7E3001EBCB2
+:1052200084FAF1D2C9F152F631E3A569EFF244965E
+:1052300079B4DAEB29836194121E141DE1DCDAC023
+:10524000E9D662749B4DFE0E860729E7583C5976D5
+:1052500036DEAF12F8380B6C3E71F0B4C9106BD269
+:1052600061C453470DCAADAD25A28872E9E3C2936C
+:1052700003D7E67EB8D21CAED28F172E29D4B53C08
+:105280001B3FB666F0E316849BD35D0DA73BF1632D
+:10529000A53B07AE00F2035FE7045F67F91F629D5D
+:1052A0005BFBD739C9D739FEF1ACB3B39F836A2C06
+:1052B000C7755BA5313E6470DC2C59CAF5B8BF8652
+:1052C0000478CC607480F08F617A66B8F1655D0710
+:1052D000B84F08707D435A919374C1BB4A663ACB6C
+:1052E000747CBFF5DCE410F380B4AFAFD78193F1E9
+:1052F0006FDDB186B6FD2E38BF24446204E76C989A
+:105300008D70BE1B5E9AD30583F777A25E6D907D8C
+:1053100000EFD75B6DFB7D677FBF59825436FDF28E
+:10532000415B2E80DAA9D0FCEF643C380DF1706E41
+:105330003544D97A841B47E13C20CC3ECE61FDEC5C
+:105340000A34C82EFC0E369F7EBC3AED98BAE3CFE5
+:105350003BBBFD60ED3E14928F080CBF2D31B11A9E
+:10536000E1524B208D6BE0DFB5A46B2C0C0E6F4B24
+:10537000EC6F03EFA0EB66D77B37DCD80AAC5D930C
+:10538000CF38A0333A692E108D461880C3A1176715
+:105390005D1C3C8E745D7EDB4F5F5B2F05D233411D
+:1053A00097A6FDF5747500E9EA82BF3F5DBDF18FF8
+:1053B0004B572784827F5CBA52EA24FD75666714D6
+:1053C000C9269793DA4A8BD61FC7667249EA98D6E0
+:1053D00085F212E2CC3EE3C380C8CA8A6672BD176A
+:1053E0000C40FD552DF1CA495FA1574EC6979B5DF4
+:1053F0004EBF9B751C57A171D13CC271E53074053D
+:10540000A25856A81F24E733E7303CC18335C5BCFA
+:105410009D81ED069B8F8CEDD878A87E9C29C27665
+:10542000FF9493C862F70ECCDF3B4E7C59222711C4
+:1054300019797D08CBFA1B2EBC0FDE4E86371CBCBB
+:1054400030FA2F453F49C100FECD5DB790FF2200E5
+:10545000A241765D61AB855FDBF0FFCDC17D9FF33F
+:10546000755BE1740DF52D60FB0DBEB7842F0096C2
+:105470003F1474E25B673C299C00A21BBBDE70EB0F
+:105480007F3BF25316FE5E21727DE3FDBB52FF8D22
+:10549000F6A0B559D01F63783D54FF01BCC6F87221
+:1054A00065D7790AFA3DAE134751BD95F38A940545
+:1054B000AE7E5602B70B017AE52511F7B80D5C0FE9
+:1054C000ED94F6E2BC5FAD90D2B8FFBD5AF13FA4B7
+:1054D0009FBF6A4A6944F2ABED57E60C25770ED5BB
+:1054E000737BD6A977C894687F3F24F786B3E9F128
+:1054F00003E3A769FC2B2A24EF3E2DF7CAB8FEEF81
+:105500007F097CA83F1FAA5785D72631E317E7C933
+:10551000E868654591827E87E1E6B5C8F68339F88B
+:1055200075E6D91C16699ECDE12AF25B356BEF92C8
+:10553000FD788ABD47793018BC8EDFAA595B9A1571
+:105540001F4A84EB5B8A2F99DDDEB4E7EB9433FDD1
+:10555000590E7CAD616E17B586395CAD31318DFC6D
+:10556000DF1ACF3EAEF36CB2E173EA35C7B85EDA4C
+:10557000CCE4C948E091C35E7818DA8EA0BF64BC61
+:105580002D6BF26B7B1A3E8F7676326C4A06BEE943
+:105590001126B0F2B8B8049B35366E4D557B356395
+:1055A00081BC1589171918301A3A2AD10F38F14BD6
+:1055B0001BBBBFC6E6356E8E5FC3767935A9EEE7B5
+:1055C00058BBB14CCC49ACDDE8636BD7A29CFD174E
+:1055D000B41351105B3736A01FAB1987980BF0B08E
+:1055E000B8A212FD6C3270B9C0A49E2E8F42FF0C7F
+:1055F00090736630F9C0FE8433FE817683E12D62BC
+:10560000CB2B9A37C9ABA543CBAB8DBC7F8BFD872A
+:10561000F266DCC078D47ECC2AC583C7D119DFF707
+:10562000DB74E987257FD771C6C2D200EA2791656E
+:10563000A296C6FAD0998B7EA8516B64E8C2EFE5BA
+:105640001D0D4C7C0C8B7726F76AB8DF38292C713E
+:10565000C1FB2B91FB9926DC715410D0EF6B309578
+:105660007E1A96EBA665A3D36D367DF6976B560A28
+:10567000491A2FB16812CAB55A91ECDE7F59363DEE
+:10568000D7DDFE037B9C81F5075D9E8565BEFEF23E
+:1056900032D10C4CFDCBD75FFE88EB9FBF51F1ECB4
+:1056A000A71F755D64B43D0A865FFFBF761C67DD8A
+:1056B000CEE60F2E1F27DC511D40F9775F6268B9D7
+:1056C00072F6BA2DA5751BB50CCC7416B9129004E0
+:1056D000CFBEEA3C554881C1D6593A2A917C9346BF
+:1056E000CF5ABE03061F578A2919F69BDD9F65EE28
+:1056F0002B61EBFF4970FE7A649443B52887502EE6
+:1057000095FB5E77FB4718C607CA0CF76F7F71DF02
+:105710007E9447169347E83FCDFC5E8B65173D5C52
+:105720002AF1FD77EF777E79AEC0C6396CF8753F08
+:105730007B7550E87983FCBE9512EDC7089F3A0B44
+:10574000DB032927874DC9AC66F57BCA05DA47FD1F
+:10575000F0D2B5FF4CED4314EFE899F7DA972F62DA
+:10576000ED3F79B10F39876302DBC7D93F51AF39BC
+:10577000DDFBE58B58FD8317E70FA96FD5E27C5D54
+:105780007472C5B3DEF20AA43784FF3FDEAC7D90AD
+:105790008D771872127E7C5670F80E237C48F7BD08
+:1057A000BF7E03F5C243A640FEA8C3153F8FA13DAF
+:1057B0005E690AA42F2E9E27A4FD59E6B978DE2D36
+:1057C0001327B0FE1246480BB0EF072BDFD97A1132
+:1057D00083F78AEF4B77E3F3E41EA920593638BCF0
+:1057E000CEFB2B4CEFFB7EBD189216E21D341E97AC
+:1057F000F0C58CB89B5EFBF518396166F3B7AD91C7
+:10580000B8FF51D00CD2EFE4B002388FC1EADF38D4
+:1058100008FDE6405F97847038FAF7E92B75B73CCE
+:1058200074E050E44412C791340576A29E917B95B2
+:10583000EE9E7FBDC4E34242DC2478148DC3A3C82E
+:105840008699CDDF5467C3E3F403D061B7EF83DEFD
+:10585000F0007C2D81C472F45B58B9DC7FD81CF158
+:10586000FA0377DBFD3CE6F4E783AC71158046EA8A
+:10587000BF6A54858AFD3755703D490783FCE3CDE7
+:10588000CC6E8421F4BAADB6BCD88CF10D3FC639CC
+:10589000343BCE11E7FA53F819F2939D2A13C9AE9F
+:1058A00019AC9F88E1D54742A55E3BC6D15F027A1D
+:1058B0005E861FC8EBF7F18D924547EF437A1D0EC8
+:1058C000FE7E3DCFAED726A7542D2B9ED243EA7342
+:1058D0007F3FFCF1F6215FA7960DAEBF15DE1CBA27
+:1058E000CAEC5FC95752698ADB25E21E7DC09693D8
+:1058F0004ABE9AC27D01D4C1BE0779FB30FB8EF14E
+:105900008C7042477F8A043C2EA4221FB8F0F38E8D
+:10591000DDEE1A59B4F5F914C541053D457E3BB598
+:1059200090F18F70763BE7D96BB76FFBD3ADAF10BB
+:105930007F14A8C41F82CEF827CB388D92F996C465
+:105940009EEB24F36D7CFAFE2C25B3F1C97FD9724E
+:1059500045AD4DE86A31C515C91EC9842320F37EC3
+:105960006F74E0B75214A71C29FC1F8C107E671CB3
+:1059700006BF2C1710FC3E7C0E06BF64C393077A4B
+:10598000838C724DE7F2156089EED64B6E90B9BCF0
+:10599000C8B3E513C02D71B7BD759DDDCF48E79342
+:1059A000278F6C3ECEB86C3E1364BE1E13E521D625
+:1059B00063BC0DC70D32DFEFD4EA841E67EB923B68
+:1059C000085DCDB3E148C9A2AD57DCF291E8EA82A7
+:1059D00011CE63DEC0BACCB6D7A562A879CCB2E747
+:1059E000D121C19CD7512F3EC7F1F72CF5ACCB6D1F
+:1059F000367E3AFCCEBA6CF0ACCBCDF6BC463A9FC4
+:105A000085767FC3CDE7B681755962CF67E950F3DC
+:105A100071D5BFDAAEBFDCAE4F76C76D726923DADF
+:105A2000198D5262855C30301EABF71977BD779ABD
+:105A30004E35D8F5AEC7F7420DDFFF58BD95EE7A6B
+:105A400060451BD13FD082B602B3634A9AE756D96C
+:105A5000ED5651BBDAFEFE6FB2F983DA059A854640
+:105A60002B4CF5D662BD86057F76EAADF3C27B810D
+:105A700003EF0682B7BA1F8E5BDDF5E6C9E3A8BF68
+:105A8000B3E20E23F407F962C9768CF3E741A4036D
+:105A9000F33C5AE5D42398076059323C86F9047EDA
+:105AA00043401F5BB422F56F582FD762F635AE5BCB
+:105AB00055EA292C5B22249ACA299F80F205EA64C0
+:105AC00055F31B987F61C07656D662721AEDF316B5
+:105AD0002169E1BEF83329F96599E4ABB6A201FB6F
+:105AE000CFD7B99E0EBDB46F3970DD13BA96F21FD1
+:105AF00072195CE88F6AC980EBFED0846EDC6FEFB0
+:105B00002D50484F66065629CA97DBA5A081FD7522
+:105B1000177C81E0DDD6C0F31BB67DF20B04EF7D70
+:105B20000250DCF63E1FCF6FB8C7A76A8D1AF61772
+:105B30001DF339CA87C8D1FCE5361C08DF278A095E
+:105B4000BE7CD02A6F10487C75A37DDB52A190BE2D
+:105B5000BC2D36BD92FAAB50494FBD2F31BD81F4FB
+:105B60008E8A20F9E8F3C306D9ADD1D90A58588EE8
+:105B7000190DA867466605310706F20B01930B2045
+:105B80003219D258F6414747097B46DB995D924F5F
+:105B90007613DC80766F05C33BDA11967904ED92BB
+:105BA00030D87FD24113E7ED1B2701FA3D9CF58DDC
+:105BB00076F4B71FD2EE8AA64758AF6B64F522ED94
+:105BC000CCEE9F31827A1D23AC971E61BD2E5E6F95
+:105BD000587F87C1ED3D95FD87765B20D36E0E7BA8
+:105BE000ED615FC6F7CC785CE633331E7242F6C6D1
+:105BF00043866BEFC441869B2F3A25FAE19486AF2A
+:105C0000EFE89B837D57C65E153759FB9631D7C4A5
+:105C100049AE8D59C19FE3EDF7E397DBE56BECF2FD
+:105C20008AE56616F93EDAC7E57029FA4386F23B43
+:105C300000D71FDF60B09F1130796968FF49A6DE89
+:105C40009B29EF54D9AA427EDD96E07E4D3F322358
+:105C5000F26121901FD607A98E1294136046178E09
+:105C60001AE01F9FF98289FC7C688C044205AD8F85
+:105C700041FEF40C3AC9A40B7F863FE7AFA5930B16
+:105C80007DDE78ECDF8A4E94766944FCA3748CB098
+:105C90005E7A84F5BA4656CFDF2E8CAC5EC708EB31
+:105CA000A54758AF8BD76B9DA3F0FD1CBEDB689654
+:105CB00030B8E7AA9E72EBDCA0F7FB45614FB96DE7
+:105CC000A642FBBF53F6CF523DE53626E73DDF67E0
+:105CD00087A9BCA9A5AB8A6D6523E693FFFC0BF9E8
+:105CE000A4541DC62F5D2166D86D197CA5EA016CF0
+:105CF0009F2FEB80F953F931BE4FB1A799CE82DFC8
+:105D0000476CFEDF29F3FCCD6DB21E40FBF11F7D19
+:105D10009E0D3E0EAF33DFE1E075E4EF9B92AD6F79
+:105D20000D96F751CDF3326508525E6649B5596557
+:105D300032B924BFC8E36099FD5EAB249FF6B9EC8D
+:105D400061594BF2F89EDDDFA20299F41299C93530
+:105D5000D47B1448D414511C51247F9F1C1E66DF31
+:105D60002874C9ADE221E0B6F358E9930E50F93B2F
+:105D70003E6ED00092AF11E825633A07B59E73508E
+:105D80004FD305A0F686C0FDE7F334DCF76281BF90
+:105D900075BF2BA85FC1BC07CE843E42BF722FF9EE
+:105DA0003BFFE6FD0E036F00F37B2FA01042CC9D5E
+:105DB000DFEB8BA7E8259C3E73469A05BC09FD25C1
+:105DC00029BE2E8B06F943616C94ECB296D806D5A9
+:105DD000BDAE7FF4157BFC268AD67A8B1065CFC2C8
+:105DE0003566EF10747E068331E81F29BCC1EC1DB7
+:105DF000623FED8F6762BC3E0B1FB42AC934EAEFE5
+:105E0000D68430B7E7E514F919DB84BCE99BCB5D98
+:105E1000F45BA874215C9172D3427BAF2D5F345048
+:105E20004F95616B8F3095B5936A8D64163D62A076
+:105E3000BD7CC23D9F98E2D5A79A86A1F79661F4F2
+:105E40001E9F6224B3F943272BDCAEF505B37FBF59
+:105E500043AC2A51669E8D37A6E673FB3617DA856A
+:105E60000B39F950BE43E10BAF201E5A0A2E8D0F9D
+:105E7000355FD0BC7997378AE634656838666683C3
+:105E800063A4F9205AB54174D8AF2FC5385DA39EDD
+:105E9000248CC27C0FFE7777F9CE2ECC03F15DCF38
+:105EA000E3B292B90BD04FEDE84D92193C2ED27A65
+:105EB000CEE3FA5329D7874CF61FCE233A6F68BD3D
+:105EC0005ACA282F51BCFA5053FD1EC0F8BC03BF5C
+:105ED000E3C7CB9CD75CB1EAEAECF818993D7C1F8C
+:105EE000A317988CF1281591021DF51A95BF5C1F18
+:105EF000A7F2D67A9D9ECDF5A5F4DC824DE7209FD2
+:105F0000A7DA8B18DEDAE38FC63FC7AADC87B28335
+:105F1000F6FD6B17A09EBCB9BFCCCC4006F7660C53
+:105F200078333DE256E58A0568BF6F0E80ED57581D
+:105F3000B0C0F494AF6AAAC4B2ED67D8DC7A1DD5BC
+:105F4000BF6F3CD8E7204CF553AE7DEF11C547FC41
+:105F50008D7B0B6F6F36617F01D92EC32D0BBC6516
+:105F600030119E80CACBFB940DD43F890036DE4FA2
+:105F7000955BF97893B81F1FCA960E8347EED70733
+:105F800045E7F2B32C8FF25914C340F72BDC976B23
+:105F9000C33DD27EE424DFEF8E66DF2F07F86698DC
+:105FA0007DCD8663B8F567E8B0FD1049B070DC5F61
+:105FB000F038E2DF7BDCFB7C1F0D2F4A459F85E735
+:105FC00047E629C9EF21BD47CCCEAE22568ED67604
+:105FD00059C4BE231CF75E45B3E79D24FE77F0EC61
+:105FE000E81DFFE5F3AEA32F66521E5220CCF96FD9
+:105FF000A4F0F6A27E3573A01F78A26ACC50FA5A9C
+:1060000041424425AC5F5EE4D704D118EB2FE79AF8
+:10601000799E724EC5584FFD8851ECF9EED3CEF7FC
+:106020007CFF4BD7E91719F3F889AD373AE51F67BD
+:10603000CE7384FD3AE5EEDE0562295B87976B251A
+:10604000D2EF5EAE7DEDBE19584E4814BF3DB5BCD3
+:10605000C9878C7414CCC84CF4872525DB9F6E8EC1
+:10606000477CFE02FFC9C67B09F73D269F0EDBE792
+:106070007F989C188FE79F0E5F3C7B3CAEEB611FC7
+:10608000E76FB03A483EFDDC071E79F0735BFE18FF
+:106090006DDB9BD00F7954E065A96DFB028BE28329
+:1060A0005B5B2F637ACB951C85B0B456C86A0F44EE
+:1060B000FC0AE1E3432119F1B3799AD57A4B0CF349
+:1060C000DF74207DD50F09D2CBEAC0AA1451DF615D
+:1060D000F447716EB9AF309BDEF1737B3FF7C39528
+:1060E000A4EF2FADCDF5A131EFAF99E6433FEA958F
+:1060F00035953EB0F565CD059F9810E8FCD4B25AB1
+:10610000FF4EC4EB32D9F4658B6B5D99F07BF6A939
+:10611000690C8708FF51FBDC03405FA13BDE34CDF7
+:10612000CFED9D78C9D0F68203B7535E523BED792F
+:10613000C403C3369D4701B5AFF0DA88BBDF9013C7
+:10614000178E60BF2F2FFF2CDF9F195DA05FF1C559
+:10615000E39FF7515C7659BE87FF96564B1EF813A6
+:10616000F3429EF255B557E60CA97F24FD19F2CCF7
+:10617000B2CF618A2487371F13483EE44CE84B6353
+:106180009E26BC2C01D7FF1CFFEB5CF2BF46C7F577
+:10619000E9A82FC06F43DA632EF9D96CD3E560E329
+:1061A0003FE7E77AAD9C5743F1EDF78F0B3ACE57B7
+:1061B000C8AB9B8CF39515B311C76D2E12D318F78E
+:1061C000BEBD789B8AEBBDA9E4A3E981BE188FF719
+:1061D000EB96361DD97FB07669939F23C87CBFC6E6
+:1061E000CFE32D2DD652AD049771BF5689F30F140E
+:1061F00042D673A68CFED7F8D16F1FB380C7D713D2
+:10620000A45797A82B290F571E3B74BC36136FB2A7
+:106210001D07CCACF7A44D8F25153BA9DFF7CF1B8D
+:10622000BA5F072F1F1822F4D8FA04D65781CD87FA
+:10623000E17F4B29CFC36D2E7B86F02C9995A4CF9F
+:10624000FAB49489F5B694AD24BA6C6175F2D9D0DC
+:10625000B9D59D744E73CB9F787CE2C9B6FD4DA82D
+:106260003F6CE9BE0930AF32184F03CA8F2D536E11
+:1062700054110F5B7600F4201DCB9DE4940BD9FEE6
+:10628000F0900669664941A8CC04940B791A3F53F3
+:10629000B9375E05B86E5BCAC140D6CC4FA71A307D
+:1062A000F4B325CEE3DFC152B3A608E11E23921852
+:1062B000D021D98EE5E65A99E6D1AA717CA0DD7588
+:1062C000C6C9EFC23C98126E7795A07F9FF5AF7C50
+:1062D00089CF5BDF5E427EA22DB92F9BA8EF5A9F2C
+:1062E00004631270BD96F40499D111F65FA7655D41
+:1062F000F7AD62F29B7E57FC5ED67401E934133F22
+:10630000EFFBE0729C77F334117666D137F6F879BB
+:10631000BC2E6D2CBDA238CB38CFF9754F9E80FEB8
+:106320008142700F567FA09E4C7E7D343C16B17921
+:1063300014D4707F29649C638D4192ECDBD160356D
+:10634000203F3AE757C755277E95644F29B28CF214
+:10635000E9063BCFEAE479AEACB00532E857FF86F8
+:10636000CDF7A6033E40BC5D72FA9117305FCA5765
+:10637000E1D728BF0A3A5EC0FCCD1B983A86E59B60
+:106380008E4D5130FFE7E5B112E6C620FF44910E75
+:10639000DF0691F2CFDE8623D1192E3A7FCBDE774E
+:1063A00050B2A21C69CAE5F392C3AD3D5214D75D49
+:1063B000B67A9DFC3D5298785E3B84D97B95B28F2E
+:1063C0001A48FEB5F37C21273FF2731DDEFCA1CFF6
+:1063D0006FF7966F84A5A3906F6E640A5D9AF57B44
+:1063E000933BEF8B8D7FD4CFF583CF43AA15F79FD7
+:1063F000363B3F66EDF7A62848D737CDD08AF01C4C
+:1064000086338F3FF8B91D7A82F1A9EEE2FFD5B14C
+:1064100034E52767CEEFEDDD0BBA92ACFC9A2EA7E0
+:10642000B89DED9D679BAF6731E67B5977FB6CBDEF
+:10643000C19BE7B87A57A589F9620C7B7ABEB73D54
+:10644000C1FFD976EF7C87C347E6FC1D7D70B0F9AC
+:1064500028BB84ACF97E21D59B2FD5A4F278A3D993
+:10646000244360FED9E7A3ADAA149D6FB61AFD5A66
+:10647000538CE29314FFAB638483F1BD7255A77E06
+:10648000DE0F4C48039D4348CD46FDE8AFED778EC7
+:10649000CAF9F06FDDEFFC41E05DABF62AC89FEB77
+:1064A000E58E1AA178E07C40C06799E318BEFD7BB9
+:1064B00096748D034FBDF611D63B8047A04750AF71
+:1064C000461CA2BF93F6BEF5EF4FFCAB82FBF7DB99
+:1064D0008F1F5F8C72EEE61F4AA0B27A279F88401A
+:1064E00017ED3B6905E5F2EADD12AD3FC85DB3AEDD
+:1064F000F4E4DB37D1FC6F7E2A42FBC3EA67FCE998
+:106500005AD67EF5775F9B0A8C6F4F36F6BD300EFC
+:10651000F1F7B8C0F318ACDEA957B2F7AB65B82EE7
+:106520005B1EC2F52AE7ABB7BE1F5A8EFBBBB0ABF2
+:10653000FB5AEAB7F36A9FDF257F97ABDC9E66F5CF
+:106540004CFC6E7D43484F12387CD9F2F2DEFA06DD
+:10655000F7A3ACDEE34B639EE2EA5D3B9424ABB76A
+:106560007ED73B44DF0B9E7A328A7858BFC77B1EAA
+:10657000E1E6A7FED43AB79CCE3BF5D5A2FC934EFC
+:1065800053F994A9F6F13C78EE8F59471CCBEA7D7C
+:10659000FBCD4B7FC3BE9F884B106022E544CF7F6D
+:1065A0002A3FC472329C62A28CF5EF7BD5CD87EB7B
+:1065B00077BD46E78E349129B017E179888CEF19C1
+:1065C000F5999EABA03C5CDFB9E91D9497EB77BFD2
+:1065D000FD6BA4BBF520BFEAE6E713F88F3167C770
+:1065E000B336A95E3FDD2938388B1C00BBF2B3DA25
+:1065F0008B4E3CCBE1EF9B9F3CF530EA116F3DF3B6
+:106600005F0FE3FD0C6BFEFC3F0F635E2BFC28A0CD
+:10661000A1DC5AFFF82FA2E0C2FFA3B67C38F98DA7
+:106620007FFBFA030C0F277FE527AC9D7CEECD099D
+:10663000784FC7C9A7FF7714EA1F1B9F5B381AE979
+:106640006CE377168C1EEA1C28D26DDAEF5EDF341D
+:10665000BFDF608F809B20C0B3F633635DE0609F37
+:10666000827AEF7B02F46DCE65EF3BFFA4A0FEF2D1
+:1066700082097D88A77DBB5F7BE10E567E9BAD9333
+:106680003FCB3AB1F98F13697F63ECC39EEB765F22
+:1066900079C5C5E5F8F419D8FD7AE8A37DE3ACF532
+:1066A0003DCAD6B77C607D33BF9F82D30AE27FFDAF
+:1066B000136C3DA7E2BAB2F59C7AF67ABE8DFF98CC
+:1066C00073F67AEE53BDFEB853B0E69107F0E3EEF1
+:1066D000FCACF6ADB39E6BBFF3A921F572473E0C3F
+:1066E00087673ADFCBE0FA8A6AFE5C45BE7DE69BAF
+:1066F0005F7F20C6D7B99621E6E493A726E0618D97
+:10670000DFF9FAAE453CF43DE7D7508F5AFDDC2F58
+:1067100089EF4E7EE7253AD7C3FEA202DBEF4E4259
+:10672000FFDF1160E575022FACD5FB2EFD35EB7751
+:106730002DEBC23268FD2EFD7539AE9FDA47EB9125
+:106740005E52A3A3FC4D17D0BCD7A5397FAC4B77C5
+:106750002F437F7626DE2301279F70605DD15FBACD
+:106760006EF7F14B91FE065B4F67FE1ACE7F36FB4C
+:10677000FEA8977F07E5577B7D4FEE785F41FDAA26
+:10678000EB878A26323BFFA4AF4F198BFBCDD39208
+:1067900086E78D33D77D00FF8D59CF1D673E33E9E6
+:1067A000C31FC81EBF76F0341CBF0F3FBF8F86BF0C
+:1067B00053F63E9C89C7B74E67DF0FCE09707B6EDC
+:1067C0001D74D4A08A99B99FF920658D2B1A80B7C2
+:1067D000B5532239FFD62EEEA7C99417EB06B1CFD9
+:1067E000A639E3ECE99E8A72EDADBDDFB7E992D33D
+:1067F000FDBA278E2B96BD3FA45DF85D3F88BFFB99
+:1068000022BBBFF5CF66EF6FFD13EF64EDEF846C35
+:106810005E8DF09FE8F1515ED2894E29AB9D3B29F8
+:10682000E0F3E85DAD9159AFE4B076523448795762
+:106830004D8DE62FD14F6A1DF1D97E00E377986F19
+:10684000D51409D239F7A6E88D745F92D35F730629
+:106850009EE47882EC27399628E731B0B4C78EF1F0
+:10686000318270C30DB255887AFFA1A23765ECF76B
+:1068700030EA912EBBFEB00C2DF9E5782E42301A8D
+:10688000208B7F23A3FFC43C0974B79FB06B8CF8A7
+:1068900007D6DE7F544A236AEB20D545E7020AA1DA
+:1068A000F3B12CFD3D54AF93FD5C94B88EFC3FFEDC
+:1068B00054CA447DAD70A3562CEA838F3B3EE58DD0
+:1068C0005F8F6594FF071CE7808FF441D8F5F8E3EC
+:1068D0008F8FE25B0AEAE52FE093C9BF4B56E9854B
+:1068E000587EC89E37E3013AC738DE4AC828E78495
+:1068F000D81219F58B85A984BCD2B59E0B63C258FA
+:10690000DC4FD383DC03F5BD00DF3F1B1AAEA23C96
+:10691000F607BF24125D3F18B8AC10F96C7FEEEC9F
+:1069200030FAD7BAD7CE3A3899C1392E2C019A9C71
+:10693000FBC2439FDB7CD8F62FECB4EF1F7AD4CE9A
+:106940002FFFBA8DB75DF5A5F47CBCDEA0EF4FD468
+:106950005750B9B3BE869ECFD427E87DF48E60121F
+:10696000E97377FD727A3F0EDE1170FDBF5B9FA465
+:10697000F2A3815C827FE29D2026D9FB85888FF07F
+:10698000C0BC1D78D2B6DDFDBDC08F9B912FFAF142
+:106990009881EF4BA04750D17F1513745CF7BA80F4
+:1069A000CEF35C33F03BC1DF27605CAEEE4E9E0F52
+:1069B000F1B0E03DEF70BF2DFFBF6DF3E93BD1E4D7
+:1069C0009301D6CFBB35CB4A491F02AD0CE9E66136
+:1069D0002171D828223C7BCE9DACCE4B7E3BE0F291
+:1069E0000F4F68E776FDF6802DDF368288F4363E5D
+:1069F000053AD29B33EFBD957A21CAC5BD8240EBE3
+:106A00008DF456EAA2B77EFA0DD879C9F1ECFBF8FD
+:106A100000FD72FE8FCF2DBDA71AF1B241243F4871
+:106A2000137E72B5FBD0A62366B78816D2F32A91DF
+:106A3000FCB9138F1D172630F874ED9B01BCB72BE2
+:106A40003E016C7F536700E9EBC155DCBFF8B563CD
+:106A5000FC1CD3A98DC54B26B3FA8B197E30189533
+:106A6000B7A8C4E3B774CE2F7C4D4DE46843F8B7A4
+:106A700032F3DEEE9F78D707396C9C71C7423A9E9D
+:106A800087B967E28FBA15561EDB2B903F696C38C9
+:106A90003519D7B3F2FF7F634CAF6B1D1E589B9A1D
+:106AA000887A63EBC46F09C807634FFF58C07D64E1
+:106AB000A2967C33C0D6619C6C9F139653B3D12EA3
+:106AC000B8262FF17B5CB74461FAD3484FA76A36EA
+:106AD000FE3BF6EFC421EBEAF4DCC92EF990799E77
+:106AE000E2A1D4D0FE4C67FE0FE1FC87A8E7CCDF23
+:106AF00059BF5335B135281733F199D96FDEA265E7
+:106B0000438EFF907D8F189BBF3FE8A2CFC254AF4A
+:106B10008CED9CF683C55D33E7DBEF271A619CB6ED
+:106B2000D307F948174FFF71C2B70F03924E424285
+:106B3000FFD4DE40724C7026DE1F97A232938E94F3
+:106B4000CF7E412EE7DF07467D7D0CF19D9C2EA276
+:106B5000BC8F118ED702894425EE73866864DB07EB
+:106B6000A60439DDCF8314F947C5D09D43C7F90B7F
+:106B7000BD71FEAD409300AB4BB5E31F206BE80F3A
+:106B80003B00D3D10F991FE4FC5E2973FB72C60151
+:106B90007D87C4FD56D292880B7FB6DFCEC7BB6619
+:106BA00070DF099A8EE7BEA6750B2E7E7D3F949C02
+:106BB0008FEBA6C4B93FD2174BD279CB855258245C
+:106BC0007F6E0797FF759050CFE37119C079EB1076
+:106BD0001771BF7F68233FDFAE6B2182FBA1984E08
+:106BE000E53A5B4FF9B14D47DFB7E5FEF76C7AF94F
+:106BF0000ECA7DF62CE935F7E730B8BE6DCBFFA79E
+:106C00006DF9FF942DFF671EED856F94933C363030
+:106C1000EFF9CBDBE28D38CD27EB4DAAB7B37E156C
+:106C20003DF7E58E16F7B07A8F6E1477223F3FAAB4
+:106C30008DBE1CEFBB4A9BA221B0C60F59DB164488
+:106C400019FC3B5481E2670FD7A7A8DD0E556F549E
+:106C5000319EC2AC650BC9A0AE87C21E95BFEBD3F7
+:106C60006A58BDAF75E45D8E71B87B6B646AE7F0FE
+:106C7000913E73033687689E3F886C9557D0A59EDA
+:106C80008376FA4691FAF94AE033EA02F61C3FFEAF
+:106C9000887A998E8B71DC4CB1EF0B1892711E15AE
+:106CA000BDBD16964B5E0F53BEF6AC577AE16956E2
+:106CB0002E5A15A1F278CBCB175376F75A1D0C8EAE
+:106CC000F16FF1EFD579BFB73A59FD9C0D51EAAF9D
+:106CD000EAF55E01E9D957EE3D7FB5DDF7AB7D11F1
+:106CE000367EEC604240BCED15B4059812627D9A88
+:106CF0009FBF197D00AAF07D3CBA88D6615BB08841
+:106D0000E8E76BCD47E237219E36C69AD1CCD9B79A
+:106D100071039D4FF06FDCC8F5A014F77F8FBF6D36
+:106D2000BFF079977C286C96B3FAEDB605FD3C4E22
+:106D3000B271596232076F7F18F5BD12EEAF2C6A3F
+:106D4000A9F6E43539F1910F85E4B620D94D3C4ED2
+:106D5000226B297A7FB184BA227B7DBBC8F5A4441B
+:106D60004FC0ED87D16FE3F7B365C2B13328131C71
+:106D7000CD56F52A941777CF54E400C231D9BE9F7F
+:106D8000C58E43F6EF63427267D0E3B7E7708D6755
+:106D9000A80C21DC5D3D9FEE64FD7C9072F63133E2
+:106DA000487AD23D22F1C7D6727E0E709FF16E17DF
+:106DB000DE73E1F0538B2112FF6E9385B4C0FAD9D4
+:106DC000565E9C7B1ED24F0C776F9AAF8A782E91BD
+:106DD0007D3C8703CCBDE817F7A35F9CAD77C9B1B5
+:106DE000D07191FC7FDEFCEF22CBBBFE629DF7DC15
+:106DF000DD78A6F4B8F39581114D3F9DD1FE5ABDC3
+:106E0000F73F901F968788CEC032A395A3307DD1DF
+:106E1000FE936AE9FC7349C63983076CFBFD61FB8D
+:106E20001C219CBE05506E3D609FBF7E608D18D4B6
+:106E3000195E9EB78ED0BE39BEAEAB9202339ADFDA
+:106E4000935FEDBF536BC4FDB528E5CD13AACCC845
+:106E50000B2AF92BF3AC8F05BD76EADE134103EF65
+:106E6000C34B1F950CD467BF7CC70C927FD66AAE0C
+:106E7000B7A457E53D80E75DF20530F0BDD3AF63C1
+:106E8000BFBE1BCC23BE49CF61DF73985C89742ED3
+:106E90005A85EB05395A630CCF43DF0EDFC2FE572C
+:106EA000F1F5AF2C04BA5FA7300674CE993D379F39
+:106EB0008BFCBF51C498389C41398F725CED7911BD
+:106EC000DFE75E2ED2FD3945CDD67938CFBD73C709
+:106ED0008E45FAD81AE6E75E9A841468086F01E7CF
+:106EE000871D912ECA07BDBB468446A428864B0346
+:106EF000FB5919DC49792C08EF4CA23BD2BB304638
+:106F000081FC685D1FE4FBCE69EB3CF42B4743BD7D
+:106F10009DFB583FE136C5D8C9FAD951E9BDA76EE6
+:106F20005288EF778190E0C4F70321F634B702E589
+:106F30002DB2B9107F33BEB280F6058DEC2A27BE84
+:106F40001FDDBB482C9AC29FC52EFEDD69CBD9B48C
+:106F50009DB7F0B0BD7F38FAC603B6DDB0D5DE37D9
+:106F60008ACC2B1A15A4DB55300DF154B2A6535818
+:106F700099CDBE6FF7CAD54C7E9998C92F29EF39A4
+:106F8000D571AB8A3DDF23C6F99EEF148AC17567C0
+:106F9000FB37E2B92D5026A1DE370312A65BAE0CFB
+:106FA000B6FFE707CDA9A18FA0FF44438914EA9F4C
+:106FB00099FAF745F6BA5C1B48CCC1F588CE5D4E10
+:106FC000793C6B03898BA87F392DA03C9D87ED62AE
+:106FD00059E1A5E4AF11C05BFD51E005D9A0F35C18
+:106FE000B74BCE7DB6DEF35C90717F6DE6FDB4F3FA
+:106FF000FF7827DD4FDB2230450FCB39F6FDB47E1D
+:107000007E3F6D4B84DB5D2D761ED53A1B0FD785F9
+:10701000F87DAF6B6C3A9D1FCA7EFF91E3F74AA1E2
+:107020006CC07AA3B3DF3B861A15F6377F5CF6EFA8
+:10703000A9108F3BCE9F38F4381B701CD6CFACA064
+:10704000B936E4F2AFCC0899EBDDE55B43767E918F
+:107050009C20BDD294F97E581434378666BAF06B02
+:107060003FF31695D379BE53F6793ED66EBB407882
+:1070700095B491E0DDD1FF5B04FD1E9283BF607A81
+:107080005F96F5783F18B5C49C817894A31FED0AEC
+:10709000717B92D1DB263E8F34E5418741BF07EFFC
+:1070A000811887F770EBE85738F6F0BFA2BCBDB87F
+:1070B000A706F5A7B53F90E87EBBB3F0B586D19D96
+:1070C0002B1FC5793FF6837164074F9492F7875C55
+:1070D000F6C7D8557D0AD23BC25FCDE1E7F9D3426E
+:1070E000FA3C6E0F00C5715A6E8A7BF20933ED913E
+:1070F0003CBCE780E48A427A5D265C8E3DE19433B5
+:10710000CF231CB2E908FFF451784F38706556362A
+:1071100025E4AF9990A4E76CD0E9C9EC964E9C07A2
+:10712000E33F1DE16C0C4DB808E7F177C4DB8F42FB
+:1071300033FFF1F0E6D07151F2927E3ACE76FFF550
+:10714000FDA128C9DBBA6311D2FBA37BBF48742D14
+:1071500031BA0EC406F265EAC0CEA30F4327EABDDA
+:1071600045C97A3A177A8AD131F62B69FC1CAB0CE7
+:107170005A02E336528CF3874F2ED5440DE3B29674
+:107180001FF30EAC623050D6A23FD20D6F7938F9A2
+:10719000A61B8FB71FBB87E4EDB581E4095CCFDB8D
+:1071A0004B2C3F6A762E39FC965B0E0B10D691FF66
+:1071B000E69FE6FB65655297911E16304E47BC2F41
+:1071C0008424952F038B9E8B204DCF4FE09546A4B2
+:1071D000C7D9E716BAAE16DDE716FAF3B9CB9D7C30
+:1071E0000E1EA72AB0E9106C3BF5F9E54B1B16B251
+:1071F000F1D9E29B188FFAEA729ECFE39F2DD3F963
+:10720000D582DEEB6B314E04CBB85EE6E441E4D5CB
+:107210007AF5B4B3EEB73AF6FB63D82EF39C9CA391
+:10722000AF65EE5BCE33535FCB0B673F3F39D8BEC4
+:10723000931957A8C37F72FBD5B6AB1339EE7BE326
+:10724000339F87EAFB9AF7BBF2CC0FE3FD4659F771
+:10725000011EEF8DEEFD7DEDB272BA5FCEC094C916
+:107260009EFAAEF9AF4F1AB08313F3729F477F7443
+:10727000A23A77BAC4F0BE38FE5EF3FE7C80256683
+:10728000F7FCD75DF3ECD118B459F484FEF14CDF70
+:1072900087EEFDF76D85CB97167BBC881D1F6B13A2
+:1072A0002D3FF1ABED7FFB4321B7D31DFB3EDB7CD4
+:1072B0009B095FBD61A487C1E6FBD930DF4F472D35
+:1072C00037E8BEFC26FBBEFCA6F14EFE96A1A13E11
+:1072D00079633897DF57102EA1F86A53F71CF2270D
+:1072E000171CF4913F7DD4B2A460B9F6C57BEBB90D
+:1072F000FFF52B4CBFC37C902D4CAFC3F2DECA59B7
+:107300002ADA0BB746A653BC7673BDE1C917719E46
+:10731000781F5DD2E5DF6B4A546918EF6DAE9DAE04
+:10732000A2DD217DB29CCAF279D33BAA183F7F66C9
+:10733000EBD44B0B302E51C6EF23BB8E951B4A98D6
+:107340001D1DE6FBEC21E3F530E2A92AAC3BF4433A
+:10735000EBE85B96347D2817E25A15E6CA38EFC190
+:10736000A62FF69EF4EBB795E44D6136FF43F6BDCC
+:10737000586D4AAA7443199E8B670207FDC42AF709
+:1073800013221D34CF18807B838DDFB9F6B84C20D3
+:10739000894FBBD64F89F3F56B136155B6F5B933F9
+:1073A000CCF59B66CDD486A4234DFED0737F68793F
+:1073B0008CE7E7C7181DB9F8F96C7AE7FC541E4E44
+:1073C00034870B502E42698AE61F26F943EDA481CB
+:1073D0007B2CE361B31DEBFD2CD7CE872EE479D057
+:1073E000EC7D6B0E96E514C977471F6C93B93E3759
+:1073F000527D306FD146D207DF65AC45F6D92737CD
+:1074000092DCDEE853E9FEBFBDF3648A6745CF81B5
+:10741000EBDC768B14B1EFFF8F70BF3CFE4E427AEF
+:1074200032D77BF09C47340474CEA56F3CCF2F6DD0
+:10743000831D35E7107C9334F77E56399EFB19EE99
+:10744000AE0AAE72FB1BE6E4F27C91FDB995BF4734
+:107450003A280BA7AB90352FD0A017F369A08A9FCD
+:107460001F130AF9391B1F182AE7D76A0DEF0D15EC
+:107470002049E7CF065D3FF0DE2FFAB89C6E0C2264
+:10748000DE62DCAF13D92E50D29ED46976E1D99D4D
+:10749000C6DCA53F0813BE1306F277F7AC20D97BF4
+:1074A000EF752B647FBE7713FC06FD49EFF972C0C0
+:1074B000624BF52351FCCD536CBE7D8C597762FE37
+:1074C00097C6BF4FDB2A90BFE9471F06C721BD1BE8
+:1074D0005110F1F72C16337D8227094208E3B3D10E
+:1074E00005D07509B6EF0E13FE7CF19FCE7F7D06A9
+:1074F000ED3F21B102CF6B890FE2FC9F89431EB69D
+:107500009FF1BF5512FAAF1C7DE81E2D7904E19D55
+:107510000DD6AA6ED6FE6E85F3D7DD794A1AE394AE
+:10752000D30B44D243C0174A4F62DF171F78BD1AEE
+:10753000F33B17574CC39A383EADF7442D790CE90D
+:10754000AF5A5B529DCBEA971FD549FE5E1ABF65C5
+:107550003F96671DE3659F9FEBF1A8C7B8CF072C47
+:10756000FE6002CDEBCD30D7679BE3668F290CC957
+:107570005719F7F27ACF173874C0B6751DF3D2E9F0
+:10758000DF3AD145D2270EF89FA0C2B0CF9F38F482
+:10759000600A1F851E7687F9BED086F966B1817CA8
+:1075A000B3365B7F1B69BE59263FE52D92691DDE10
+:1075B00065FA16DEE771369FDC42F77F66F29303C9
+:1075C000E7E6F2BC18CA61876FB4D977925CF65FC0
+:1075D000AFD07DA60E1F39FC332BA79F8FBE82F242
+:1075E0006259585FC853344C70F3C995C3F0D562E3
+:1075F000E8DB1F63E5C53258394C041D9AF3BB9292
+:10760000092E3EC9C4E7E27902BCEA9183BCECC210
+:10761000B7D67F0F70163B79B0753922F3730F0E12
+:107620009FE2EFB1E0F9B176D100DC8F1A73571AFF
+:1076300011364FB936770DF2C3162191427E88CCB0
+:107640007E2B7423C3FB7BA3981689FE437DE553F1
+:10765000C4EFAF84C82EBB7BD66A8A4BBD7753720A
+:1076600022EE2F9B18DE5FA5FD3C3D5AA45CDBDEBD
+:10767000D13C6F428FF36732CEDF83FD3D6D974D76
+:10768000BB5E2FD563EBEB919B07A29C0F0E44F9D9
+:107690003EB549E950911EFA8A54CD9DAF7C897D53
+:1076A000BFF0CD113BAE78BA49C7F8C4CD11DEEEBC
+:1076B000DEFA4ED25736D5EFA1677E6D1A303F2ED7
+:1076C000586AE9A857A87F5E20E03E0BE7F3783BB5
+:1076D000BE6F70E96B9FB2E5B68AF700B179AB8DEA
+:1076E00096EEBE77561585ACF703FD24CAFDBF6A3A
+:1076F00023D07775EFFFA3BC84FC1243F81C961BC4
+:107700003BE87763025DFC7DACC4146E70F51BAB87
+:10771000EDF4EC8FAAD82B933D54079A85C69DDCD7
+:107720005B8D7EB7F6A5C10ECC57CEA423FC7BD5CE
+:10773000450FEA9FAF24BD088E70BDB4BA5825FA34
+:107740006DA95376A05FEF0FB12ACA536FB2F196BD
+:10775000391F8CAB334D8FFC64969FC7D7ADC93CA6
+:10776000BE8E658CAFE313E3EBF8C4F83A7EC7F83E
+:107770003A96BF556F5219E3EC58C6383B9631BE66
+:107780008E658CABE3734FFD2A7AFEA03E45DF9FEA
+:10779000ADAFA3F225B6DC8452FE3B5FED5F544CE7
+:1077A000CC8BFAA1BD3EFBCCA5AB7E8E7E40881A69
+:1077B000B85F070E36BEF213BB4CF75FC78BF3D131
+:1077C0002F093111309ED01ADFC674CC81F905E43F
+:1077D0007B41A778BAB50AF31977460E5D2A33FDC7
+:1077E000A1247E4B551E2BEF8A1C6DC5FCD173F571
+:1077F00086E53B5C653D327DF5D3DA407962D90E92
+:1078000039C8BE3F79F7CBAD28070231AEF77D2FDF
+:10781000F2AB4B1B1849741533C506E558919246D7
+:107820003ABE01D76912CE83EB2D9F80A638E6EFD2
+:107830004DD495E9C87FAC7E17A7FB91D5FF2106F3
+:1078400061669EDD6EA87A62F988EAD1F9DBC1EA49
+:10785000E17761887E5AA049EB61B06FF1F1FDD507
+:107860002AE0FEDF761FE7FBF6007F4EC8E1F4F763
+:107870004EB4EAAE287BDE15E5EBDB1EE0F70EF436
+:107880004D11E9F778A04EF827ECE70B6341C3BC34
+:10789000C7E9538AF351FF3F62D3C3A48911BE6F76
+:1078A000FFB34AFBF665139F6CCE63E549FF6A1888
+:1078B000B80F6F012388F7B65A5B45CA23FA66F9F9
+:1078C00039794B58F50B667E270FF5DEE9B6DC49B2
+:1078D000DBF64943CB8D13D13E78EF252EF78EDBB7
+:1078E000E3ECF0F5A4683D6786E91C054007E9254F
+:1078F0000D7199F2BFC431FCA9F8B46BE85ECC16E7
+:1079000085EE6152FE345B257FEA077EFB1EE21E98
+:10791000D257944052CB65EF3B2C91FC0F4D5A301F
+:107920008DF7616D094FA7DF65B0CA648A876D293D
+:10793000E3719D50E42ABAEFEA2BDD01AADF12566B
+:10794000290F385DB6FB40550C9FA286FB7EDA5CA2
+:107950004AF7535A9AA8513E31FB177D5F13233FD4
+:107960000F9D2BC6EF6B781CC237FA20959B3EA566
+:1079700051FF60E7ED93EA25E2EF4424BABDF7CD6D
+:10798000F6FDF442F483ACE6E752A66A4BBB9F6374
+:10799000DF9B4D3551CCF8A1457B776F08CB2B8011
+:1079A000E2A4A129AF3786B0FE0D9AC1F3B0F83931
+:1079B00008B0EF376E2E5BD6FD1FD8FFF2104C32A9
+:1079C000B07EB58AFC0ACDF002DE475568EB33A1E4
+:1079D000DCE902EA632DB574ED2683CF7B7EA03906
+:1079E000EF7215E9465A9C47E3B480A9627DAB5615
+:1079F000A67DB130AC76A1DFA0D0F63B38F2203FB7
+:107A0000E53A47C0FE37768DEC396730FA066FB934
+:107A100020E37EDD0B6DFAC9C45BE63CF363CFE483
+:107A2000223CF96BE844C459F0DF1B9BBE04E735E8
+:107A300046DB2BEC28279346D3F17E714835B8F30B
+:107A400030FE5A78A79635F7203D4CD565D0195EA3
+:107A50002E84BE46EC7F8B4DFFED45DEFDF9886D33
+:107A6000D7303EFD7C7426C63344B05CFD63BCC396
+:107A700072C1734E7B9EA73CA963ACA7FEE4EDC523
+:107A80009EEFE7A5CFF77CBF60D7744F794AE75CDC
+:107A90004FFD0BF75479CAD3BA2EF7D49F7160A962
+:107AA000A73CB3E71A4FFDD9AFACF47C9FD3BBDA48
+:107AB000F3FDA2DF6DF0942FEEBBC353DFD1EB33A8
+:107AC000F7CDEBA37F993E8FBFFBE33E4F9C692F21
+:107AD0009C756FCE9F9B748CFF4194DF932BE3FECC
+:107AE000CECA1BBEC8ED2E75BEA1A3BCB9DAA6CB0B
+:107AF000D579E63A94AF955195F60939CCEBC9E1C1
+:107B00004B491F99B09DC9A919648FF57FC7387477
+:107B10007BBD35BFC4E5AF0A681D80F95F95D11AFA
+:107B2000BA2FD0692F6B26605EDCD5519DDF73C301
+:107B3000AC59BA074067ED5DF362F61F5D1DD1C712
+:107B4000EC43D4EBFBED3F3987E2BECCFE23FBD008
+:107B500008727B104E4BF4DDF88A40F7F333FB8E4E
+:107B6000ECC367C2CC3E9C86F658EF1694437D3F2B
+:107B700093298EC8FEC8FE2B67F6DFE65CB71FBCF4
+:107B8000B7089F69D0C6E2B35BE9124717913D7809
+:107B90001FD2F36736BEB40AFB9D52CEEFD56B1FE2
+:107BA000551B473DB9BDA893F8A4AF48E6FB909C90
+:107BB0002875FBF77E6CAF7748FD26D9A16C1D4870
+:107BC0002E3BEBB045E84DE3FD85D61783E4EF9EF1
+:107BD000F05BFF11E437B5581D87F97FC63EC5C479
+:107BE000F1EEB5F15CAC4DABC29F792C892FD98BEE
+:107BF000CF7375A68FB06769E93D7BF1F974949FE7
+:107C00005F3DDF78BA0A658C3A9FFBADE5A94ABAB9
+:107C100051407F3383238BDDD1EF9F886EE7F7FDE3
+:107C200094C86F20FDA1D67F864DA1324FA5B871B3
+:107C300000E942A027D153400ED1FE12C043A858FC
+:107C4000AE10D218EA42FD15F3412BF3B6131D38DE
+:107C50007A2DEABB496E1FFF18F11AABF5AE7F48CB
+:107C6000FD16E1A9D93EEFDC9EAB1FAC62E3B6176F
+:107C700014E7A1CF16FD294B5CF2679FBDEF3E9242
+:107C8000237AE4CF6CCC519839A017317ED82E9E40
+:107C900083F02628BE1E3828913D1FB8B3837E5F2F
+:107CA00035A0593A90FE6FE9D86F75F172F2FFFD79
+:107CB0004F6C3AE9C181BA1F65C55BA0570273C614
+:107CC000E0F88C9EFB00E903302AA8E33E5B170B2B
+:107CD0009A3BB2D8079F8D70FFD9A6098E3F3341DA
+:107CE000E75D5BD0DF16C6AD4D15314FE7D69F156A
+:107CF000EC74DF07716B01F74F0E367E80D999491E
+:107D0000177C9B58BF28C75B4E2FA9A1FB54719BC2
+:107D100029C7F3A0653BC84F6FDB4B9FB5F17A7362
+:107D200084E37182020B76A03CC963FA114369A512
+:107D3000ED5771FC2FF11C1ED7372C90B85FCEE7A2
+:107D4000EC5BE219BC8746075D99651FF127159822
+:107D5000EF6BECFFBAF15CE039EDAE7D0E703FF0F9
+:107D600096276FF796CF4B7BCB4C8B7E19F58065B2
+:107D700000DCAFB1CBFB3D0CA60FE328639DFBF30A
+:107D800013FC9CA0CA2040FA2EEB4C777F8DCD2FA0
+:107D9000E1DC7399715FFE94DD69D25FAEB07FCF95
+:107DA00023F31EF7B1F8FB1E53695E9E7D74BA4F34
+:107DB000227F03FA890C979F68A2A67BEC2AC7DF73
+:107DC0009329D783C7EE01F685ECF5A41FEF43D5C1
+:107DD000CAD0AFD05A78D76F8F970FF8575AE5D4DB
+:107DE0009BC7C97FC9F4AF18F77FA05FFAD69FDDA4
+:107DF000F6DFC75D7ECA77A2C9A9E8CFB87F226F38
+:107E0000EFDC97EA9CE77BB7467E5ED0391C4917CA
+:107E10001CB7975A977175253D06FD438E7FC5F1B6
+:107E2000235C9367DE857CB7C53892DAC7FAADFA72
+:107E3000951FB09F85D2C103F528EFC6CB942FA222
+:107E4000CD5EF34810FD99F89D95AB8AF4D1C41F1F
+:107E50002FFAC89FD066F3BD732ED5F1C77CC2B68A
+:107E6000032ECB71F4282B689FC708A29E7CC12EDD
+:107E7000B6869EFD90FB031DBFDF944EEFF7F3F136
+:107E80008837F93D77507E933187E7378D5A9EDEEC
+:107E90008BEB7CA1BDCE18B7AA9C35103F1DBD222F
+:107EA000BD17F5D0A9769E52D98BCFD34FF9825406
+:107EB00028217D9D8FF949AC9DB15FF69C0719057E
+:107EC00002E5F98C3A2A1969D6CFD467BDDFCBC059
+:107ED000552E42F8BCE5CCB81453B7DEB95EC0DF0E
+:107EE000454D0928CFB6AE6036022BAFCAB1F38B31
+:107EF000CE8573916E174A6103EFCDDBF00B89F2EB
+:107F00008BFDC727FF12E3A3F012CFA7D4CEE1F178
+:107F100056EDA792C12420682198362D3C10C7FA4F
+:107F2000EA1903EFD0EFF78F3DCED61DF7A12798C2
+:107F3000DD5FE2433B5EA37227B3FBB1FC0CB3FBF6
+:107F4000F1B99BD9FDF8FEBBCCEEC7F21E66F7E394
+:107F5000F307CCEEC7F7CF32BB1FCBFB732BC91F88
+:107F6000DF83F7194DC6DFB5DD4DF98C6DAA4F43A0
+:107F7000FAC994679595B7AACB187E378717521C14
+:107F8000A56A21CFA76FCD5948F674BF9F2EC3CFE6
+:107F900039E0B7EB151CBF1D1E6D8EDBF66CBFFF05
+:107FA0003369D0BD05C3F7633AFD90FFF4AC7E6C36
+:107FB0003FEADB5FFCF5D79BD8A7B533B7B5078B96
+:107FC000F13C4F8A7FB7F30A337F4F6BEDEE06CA61
+:107FD000F353C61C4DE1BAEE2E0F93BE81BFB7849A
+:107FE000723BD34E74ECC34C7DDC7966EE87997995
+:107FF00030115B2F192E2FE36E5F8AE2D656039362
+:108000002FB85FD4A7E7BFEE3BDB6F3B56CBCB3837
+:108010007FCCF3AEFC07783E5E3B2435F7FC9D73C6
+:108020000F64F31573FFA1DB6F1B2C49D3BD0CC18B
+:10803000B049FAA2C0F448D22BB524C5015B07F9B8
+:10804000DDEC376D39D130E62ADAEF5B5FF491BEB3
+:10805000556DE7BF358D51A9DC3466569CF2262359
+:10806000B3D4DE2CFD6C88140FB9BF4A6CFFD787E0
+:10807000D8FF253F3FEFD5B4778E8AE7A2DAC32B2E
+:108080007BD06E6F8FC7C8FFDF3D6696E7DE712934
+:108090005E41F7544861AE674B7195F46C19E75F28
+:1080A0003650DFA9B72F87EF238CCDC98F190877FA
+:1080B000503DBF9C30D1DFE28FF1FC62BFC6E3854B
+:1080C000C11211D42CE7309ECDE1E7ACDACB921A85
+:1080D000FA75DAE3329DE768D7A70F166F25BDE87A
+:1080E0008F3982877E9B6CBF43D32A85F4C2445D5F
+:1080F000AE569D4FE711FA90CFDBC38D2AC65F9530
+:1081000031E543F6AB68BCDFFF03837E3D1F008093
+:10811000000000001F8B080000000000000BCD7D58
+:108120000D6014D5B5F09D9DD99F24BBC924BB9B80
+:10813000ECE68F09241A34E026243168C449083C4F
+:10814000F4212E021A5A2A1B1045050968EB6AB55C
+:10815000D9908010A4067F2A4F2CDD58B0F6ABD6FC
+:1081600068E92BAF455E50E4F9839AAA55B0A8019F
+:10817000ACD53EB511A4A5EAFBF8CE397726D9993E
+:10818000CC26417DEF7BD832DC99FB73EEB9E7FF5B
+:108190009E7BF7D429F87321636D7B52545609CF27
+:1081A000A58E784A1163E1687976C324C6BE951519
+:1081B000FE22C3CF98C3B3488EB919B333A676C392
+:1081C000F394D64E7F7A658131A827CABF98F29E74
+:1081D00077E877FD29A66F661168CF8AA5F7FB5C63
+:1081E0008CD914269CB24199B9E5F7CF66F4E7948F
+:1081F000887FF706C29EE4FD785CBF9CF2DEA4A1F6
+:10820000ED9697F5394485B1F5DB3AC30CCA9F0B5F
+:1082100050A842B8636A1ECCEB869D2B59A48CB142
+:108220008D52AF4B0638367E292C0C970DED7F31E1
+:10823000CEA70A7B95620827FCB19D3A07FE5698A7
+:10824000E2A8662C0FDF8CC527FF0EA3EC3905FDD5
+:1082500097F740B9548307FE3FE93963B9AAD75865
+:108260003EF780B1CC58C81E9EC0D8EB2DD0E999FE
+:108270008CCD39F4E12196CED8DC58E8D9A77C8C96
+:10828000E5AAAE705C666C1E0B3DFB3694F31AD308
+:10829000584F0806B7B1A5B82E30CD378B01BE4672
+:1082A00046B0B2BCA5A98CB906FB9F2F67D23A3560
+:1082B000F635CD641319FBE1AD6D8C413FB17A21E8
+:1082C000BE1DE09FDDB06DF638783E50692B781802
+:1082D0001B45ECEFE1FC5CD0D929986FA66DE598C1
+:1082E000B1503F3C354D68837A3F3CEFACF5C5500B
+:1082F000EE9D5E1242BC03BEDE1B980FE07F5E98CF
+:10830000B7D7C77FA5F2D8DC71F0DC52F9E46C7CFA
+:10831000CE49AC0FFDCDAAE96A75407F972E532A4E
+:10832000B0BF7083B17D5EADB10C90F3F9C0BFBC3E
+:108330005943E11D091EF3F87A7F0FB428847FF6B4
+:1083400025D003E0338C9FA07D58EA974280E7DC7C
+:108350005A418D03DDE4A982DA65C10F1D1A3F98E9
+:10836000F12FC63218F259FD3C31DE0155725D76AF
+:10837000C27FEE4C21AEC0F8B94BFB7B4E41F97287
+:10838000973D2EC2F7ACCC6E01BF3FB08CB1CE2270
+:10839000022FBD2E617D1F70ADB117C2F7794191DB
+:1083A000D9800E58ED381A8FE0184BF838C2F1E139
+:1083B000227CE42D0B3DFB6318FF8A1AA72C42FD9B
+:1083C0002B1AF9771DBE8D12D0197CDF0874162385
+:1083D0003A938E24E267CEA1E5CB911EE798DE1793
+:1083E000435D9CEFC7930F9C5108702D173A67A40B
+:1083F000012829F666C670A1018348D73A3FEA787A
+:108400005ABEA395F83181CFECA7909FF1DFD984B4
+:108410001AE2B3A75DBF92516EECCEECDBC2808452
+:10842000B7CA2CD690CFD8BFA7F69F2D4079BB7C7A
+:10843000F9BA7517C0F794FE5FB072C69CCE6FCFC5
+:108440009891504E4DBD86CA3E6D1C98428CAFF738
+:10845000C0B8441FFF2973F836A86C930865C92675
+:108460006F0A150DB6CBC276C230EDC26C9364D1E3
+:10847000CEADB7033CAD85F54BD5E695AA7DB76982
+:10848000F0248E2F21DE64C52DC07A48D32519E94A
+:10849000E5EBC2913DD2BC236C937DDCD0760076B7
+:1084A000AB0EBFCD1AFE387E4F1CDF3E0CFCDF3416
+:1084B0003E46EACFA17D3F6DF8A0FAEAECE4F34531
+:1084C000B8ECA8AF14C56D4BE8E7AE3DFF78F11CE2
+:1084D000205E693E0BA5401F925D954340E765F223
+:1084E000BD2EEC5CCA6C9023C00FEBA1ACC2FBF5B7
+:1084F000DD9D2E05DE9715DFBD0E89BEAC2795A14B
+:108500003C98C0E4CC47A1DF09B2C47A70D52ED81C
+:108510006B4B8332BB84854AA0DF8C3DA9244F324C
+:108520008BCEFBA900E36666BA546C9F9659FD5347
+:1085300046F4C11429011F6975AFD7A7215CB3594F
+:1085400008595112E2AC0E996C3CF0109433A76DAF
+:10855000630D50AEF8D8A388C8D312D7771DD81EA4
+:10856000F5743BDB87FA25A8C99F750E7913E98F4F
+:10857000EB2486FA236DC2BD02C2F3007425025FAC
+:10858000969565CD6E8072D97E5B4851703E9D4256
+:1085900021CE272092DED2F1A9CB918A4F7B38D30E
+:1085A0008F67F1ED007FBB3DDE83F22A36F90A7951
+:1085B0003BC0937B5582BCC6BFFA010708EF4B97BF
+:1085C0006DEF2842FA96DE4BEC2FE3D3780FCA33D7
+:1085D00056D718C6F6BE999241FEA76AF22CD5A4CA
+:1085E000075AB2EC24CF747DC054499161DE8236C3
+:1085F0006FF68330E903270BB91C64AF2C203B4492
+:10860000607DC2A934983F5644B80BF83C86B4AF9D
+:10861000E6ED5920E4423BC799DADC8CF5E163567C
+:108620002B2057B82E5545FD2C38982B5801F3B602
+:10863000B14837D049ABC0242C0F8ED7C3703CA7AC
+:108640002BAD1DEDAEA75D6D36C45FDB73A03F6043
+:108650001E77D85923DA056D72C89505EDA39AFDEA
+:10866000B6AA7C6C0E963380B67BD16E90C232D2A5
+:10867000E52A7F710E83F7E9DEBE6FA39CFDA7CCD0
+:108680005FCF7015801CAD873AE781DCDFF4F8BA64
+:10869000582D8C77328F2909769E536A66684F3938
+:1086A0004F161ADEF7B4C08CCE1C2CAB6E5B038E5B
+:1086B000735DA64278AD63723BB6AB03642809EBE9
+:1086C000E23C1964CA24ABFEF30DEF7BC04E529C12
+:1086D000A3E93F8D29A589FD8F4BD2FF19A6FE6521
+:1086E000CBFE07FBF51AFA5D2331B2A3633E37AD2B
+:1086F000BBD92E589D59BF2213ED51276BEEB6B052
+:108700003B5B336D04F71D81E65E15DAD733607C81
+:10871000A0930BBF3C2232B26760A5805E58BED4E6
+:108720003F40C763B11EA75F5B4C6028972E94EC57
+:10873000063E99C28C65B35D54026B8DE3DA3C95BD
+:10874000BD483FABFCA98AD3027EFDD9DBC2A6148B
+:1087500097C07C53C34B19F0F10399FB5C6B02503B
+:108760004EE774F248E61F67A0BFD02B70FA5BE3B8
+:10877000B3115EC2F5395D6242BF61072B41B91882
+:1087800046FA76737870FC5E7FFE431D16E383D84D
+:1087900035D80FB355614A71C2BC7A353B7860BC9D
+:1087A000A9795DC80703E33959158D2702FE13C760
+:1087B000CBFE6AE3FD1EE7573638DEECE9C6F9CD9D
+:1087C00076C834BFD91AFFEAE3FD1EE757F415C691
+:1087D000C3F9258EF74FC6F9CD76CA34BFD922A783
+:1087E000AF81F1B2BFDA78BD2DA56407DFE100F9F2
+:1087F0000474925ABEC3350EC6BDC365970565B0F5
+:108800005D5DDD8DAEB9A87BDD53A7FB619CFA6988
+:108810005039177B993ABDAE98B14D02A78BFFDC5A
+:10882000F4E7754817C767AE2A257DA2D9D79762A6
+:1088300055D0C7974A1CDE59F9EE786B021E1F000F
+:1088400039A2021C0F02BFABC08F5B812FB11C6F1E
+:1088500009D0F321B0D7F1B90DE0C5EF0FB784A867
+:10886000FC484B0D3DF57E4A6BB8DD3EBED6DA6E58
+:108870003F238BFB7D9B82F2FCAB50AFD5A586508E
+:108880002FB29AF3999A6857B3E6A753E0FBC6CB89
+:108890005939EAC6333673B87D0DD964B7A796EF58
+:1088A000ED6D81F21D925D41BD7C87C26658F9CDA8
+:1088B00045A867AAD05EE5EDD9F9DC0FF385FBF694
+:1088C000A2DE9B83763AE0D53FB76F2FFA7F978180
+:1088D0005D4E7A991DDEFB367C7F1DFCBF0E2C8B16
+:1088E0006E264379D61C3F8D0F7FD2EBB2D17EE747
+:1088F0007FEE99798CFC8A700AD70B3E36FBD93D06
+:10890000086FC8A1C4A93F765F18F940B52B1D2494
+:108910000AC276D4D37ED4D3F0BDEEB093D910BEC4
+:10892000690E926B73E71AFD864D293D32DA3F9B43
+:10893000CA7DAC15FABF6CA6F1BBD3C9F92D6CF298
+:108940001B6699CA2021B9DF2D2EC8407BFF0E7C03
+:10895000357928DEA2875AEFD89B40A779591E1F88
+:10896000C501CE6067A03C3BC1CAEE6AC08FF95911
+:1089700064AC98DBFFBD2576C75E40FD2B28F7AAC7
+:1089800090BEB9DC18CA1F1C9EC95ABD075A7AA7E7
+:10899000BC5732085FAE1417500FE42D85F709F36A
+:1089A000957C7101FD1D263E5A8EFE8D791E0F08A5
+:1089B0008F0699C578FA339749EF235E7029519E47
+:1089C0009BE73B79C87C6B5F296656FCA46C427BB5
+:1089D0006ED67362A85519C4873EFFFF69BE3AAAD6
+:1089E000E919A6FA580FD0CB2B40EF1DDC8F616838
+:1089F000A7EAF40A15C87EBAF452F88E74A1AA0543
+:108A000088CF57C6F66FBB1ADB81EC68437F57B738
+:108A1000837A0EDAD00EFAAAFD5E7A9D83EC2DC61B
+:108A20001AE4F74B07FB4BB63ED8EFFB09FA73C0CD
+:108A30004EC43FD59AE843185B4301B2076E01FB71
+:108A400018FDFD68C387523AFF7E24C14EC53F47DB
+:108A500012FA6BDBF3734101B8BA5ABAA7BC674F7D
+:108A600090174B65DB1AB4E75AE302C5217AA01EC2
+:108A7000D80363972AB676C0FF55D80FD2A749AE60
+:108A80008F6D877E12ED94DAB9F2A3400FED65F594
+:108A90009D2178AEDFCCE3657AFD81B8992F46FE43
+:108AA000B99D353301E074A4FCE0277D301FB54D3E
+:108AB000622953A06CE7F60E7BDB4372417437FFEB
+:108AC0000CBF076220B770DEF5CD8F63396663E1B6
+:108AD0003678DE9FC6DB472597EC0C619CA47D06AB
+:108AE0004E3F3318B92F0BF0B7263B95E4A0E31D9A
+:108AF000CF4328A71C99154BD1EE5910FD7E18E3E2
+:108B000091B2972D0C5BD0D702CD7E8867F1B8CBA0
+:108B1000217B4F4126C05D17AC8F63BF43EA477F7F
+:108B200040FD4D11ADEDB09D5A3F5B6CD672E10931
+:108B3000EDFB15CB9FFCF061984F5AB13B84E4B636
+:108B4000FE1CB643B00DADBFCB1FE94E8423A55824
+:108B500096280ECABA27A33DB7FE8B07BB1F079402
+:108B6000677DE126399B257AE24291A1FDCEACAA30
+:108B7000A1ED77FFE38D00AECFEE1446FA95B11765
+:108B80002F427F72E34099C5048C73666AE5D8234F
+:108B900017A986F2E28BEAB08CB40B4439F99EEF48
+:108BA000AE8F617B819759EC7BBCBE9DD7CFD1BE88
+:108BB0004FB9F8A39FDE85FAA0DA417EE846CD0ED4
+:108BC000D2E13BDF2B12FD9CEF1D1E8F0735B9E074
+:108BD0001A3D1E0F5AE17177507D0BDFA7B06E0171
+:108BE000E938E50BD74DD8FE5F5A58F82A807D8BBF
+:108BF000B2E3E77729D4FEB0151ECF0AAA47B0BD6D
+:108C00006BF9919FDE0570787438CE65372581E366
+:108C10002FC3ADE78E6C2EE7E6F9B8DEC8D2EC4D77
+:108C200087A337301B9E72E58F6E9441DEAC2DEA30
+:108C30006EB48A3F9FF0DAA85D6692787B8697E3F0
+:108C40006D574EF87384A35D7ED285E3A70A2C8C02
+:108C5000F537D4F43121A1DFB37D7C1D006E9B1765
+:108C6000DAA54E662AD2998779E20CE8CC53C9E19D
+:108C7000DF10789D29D0CE530A4F37BEEF23FE4731
+:108C800097830B351074507668F491714FC745483F
+:108C90000F59A24E6F791D482F0E9B5E3FEF622C3D
+:108CA0007765F172B92FAF23960F7AC6016D502EFA
+:108CB000E43AC8DE31CF2F4783B7C3AFFABD7E0B8E
+:108CC0007C3AFB689D364E708462B0AE536CBD8DAD
+:108CD0008BF1DBC56EB2D7E07D633C61FED3353AE4
+:108CE0009CEEE5F6D6C67FB81AE316EB918C4E27BC
+:108CF0007A4F9B4E277AADE9F41CC47F029D7EC655
+:108D0000ACE9B4DAAA3DD0E9B956F8309745A66E79
+:108D10006E0200A5CFA73F72176AAB7FAEDDFC38AD
+:108D20003CA77CE196BC50473C83919D687371F9E8
+:108D30003E28F723D3B07F496EA6F7A23B4CFB3504
+:108D40002F65F1FE87F47B6EF566945BA3E8378CA4
+:108D5000F336F73BC6CBE19D72B13B12B7C0FB497E
+:108D6000AFC4FD521F1F3F19BF94FAB8DF9C945F38
+:108D700074FACF0947108E91F8E5C2417E593A3A0C
+:108D80007ED941FC9256C6F9252D09BFB09893F8BB
+:108D9000636D112FDF728F8FF861807F622546FE31
+:108DA000899518F867DABD2554DFDC3E1DE76D8133
+:108DB0009798579F47B805E7A19E2DB78B646FF42E
+:108DC0003194535DAC7F8F13F9B056086D87B7B3FC
+:108DD00062BD0D2E05BFF7B2D9607FACD3E87E2B04
+:108DE000C283FE50B516CF927AD9659EA17CECA9BC
+:108DF000EC298D24E0BF40C3E3E5BEF05D387E176B
+:108E0000EB1B8F7669B275BA5783F7A6807AAF15D8
+:108E10009D8FA47776A2DEF1E393C39DF585AB1910
+:108E2000E58099CFA7DCF0DB0F1F1EA69F5F6B705C
+:108E30003CA63D4F83EF1FF35AE9E9A0FA4B13DF3D
+:108E4000570A632DF9FED756ED81EFFFD50A1F5F54
+:108E500083CF9FB6E2F307BDBCFF91F02CF9389E9B
+:108E600025DFD7C3F3116D9DDE3A7D3CBF9504CF5E
+:108E70007FF4FA4785E72349E4EB512FC1618BE189
+:108E8000BE00F23BFAEFEBCE8DF5E37EA8051CFFAA
+:108E900099D88F4BE1FD8069FF9900743EE5F37529
+:108EA000A188055F42BB6389F0EBEDEEF5CA9A1F1E
+:108EB000A1AC44BB7ACB3FBB693F01F4E0DFBCDF30
+:108EC000AC9CB7F92CE4F1141B974397DF73783D02
+:108ED000C669BE46FFE956FD3FAFD1D748FABF2865
+:108EE00041FF633F6679D7C5783CA5C31FC9F71119
+:108EF000BEFA2E42F9B4F5D62C01FDBA7CB5474036
+:108F0000FBDFAFE9978D5EEECFE8EDB64A3D828498
+:108F1000F59B65212618FA3B63B8FECC70007CE314
+:108F200011BECB7DEA59F8BCD73B60EF9D963D540E
+:108F30001D502BB03DC8E94A1C5F3DD328A7F579E9
+:108F4000D8C2DDAC0FF50BB8DF710BBAF26BFA12B9
+:108F5000FAB980FAD1E47D954FA72BDEDFE9EA1B51
+:108F6000806FBA06DF0C7C9AE133E36524386F46E4
+:108F700038797F9725C299AC3FDDBFD6D789F46990
+:108F8000425C67E1A0BEBE12FB73ADB1C5986F90A5
+:108F90007F757D0D922915FBDFE2E071D42DCBEEBC
+:108FA000AEC37C83AEDBE4724449EE52AEE7946517
+:108FB000851457BD56EBD70CFF407B47F7F8496542
+:108FC00034EE721CF7C25AD683722303ED048A3F33
+:108FD000C812C617B29C9D018CCBAE173A1B17A1C5
+:108FE0001EBDC84DFA9605E65AC6A7F4A71E7FD245
+:108FF000E7CD029523D46FA5FA725A6733DA49A3F5
+:10900000AEEFECB4B4AB7EA8D95530BFF5C3E235B2
+:10901000E0A3F8968EDFA1E3F0F5AB0B370B88EFFA
+:10902000D4321812583235DC499BADB6E238EB43E6
+:10903000FBA914E885FA7BDD32EE37D8DF5A1DAE86
+:1090400007911EBF2E5C7ABDE4E3F17AB87F46F14A
+:109050000E37975BF401CAC79EF35AEE1FE8CF3B69
+:109060005A645502FD734C5632305E7887A6071954
+:109070000B052EF3FCF7D71B9C479CC73B4DF5A374
+:109080008CD33D0BB8C8BEC3307C22DDBCE6E3FE0A
+:10909000684776F8392E1F4321A46B28BF80F867F4
+:1090A0002E287BA8BC9FCAF240F965AA1FE0F5995B
+:1090B0002C8F0ACFD0EE0FD44E1AE8E74DEAD73DF9
+:1090C00030EE41FAEE1B28FF91BEE7F3FAA31D270D
+:1090D000615DF9FC7B459AFF67929A81FBA39747F4
+:1090E00017539C687EF45A7AAE6B91EB301EF77280
+:1090F0004B7F7B3B3C2F9FBF5846BB7FFE927B68DC
+:10910000FF5EEFFF52F42B90DF156906D94545B697
+:10911000F036F720BF0DC2D1AEE599F535201DB967
+:1091200054D6DF510EED6B3E6D6F37E4397552FE4C
+:109130004C8A227D9E1857D7E5E0C70EF573DFE90C
+:10914000D1B169BE8CED85F13F7317C76344D7F584
+:10915000B215BFE8F34ED6BF3EEF647246C79FFE1E
+:109160007E7D7185CCF37FE206BCA4943450BECFE3
+:10917000A58206A7C7A5F11BAF370BC679B28CE84D
+:109180004341FA9DA5F97166BDA08FFBB12352E45E
+:10919000F7E37E0363B75558E07794783BD0B23459
+:1091A000DC604779DC9D42FBF74CA638BF5EAF31EF
+:1091B000C9FC2FF0733DC29C2ACD67C3ED1971B471
+:1091C0003B3634FD5AC6E04ADA84CFAA62F814FA74
+:1091D0004F2C42F972BB87F2311A9B4E54B526F4DC
+:1091E000BFF0997F7361BCB771C26A3FC65D16322A
+:1091F000E9B3C47C07F3B88DD11B886E63AD42A37D
+:1092000095BFF56636E7EB85982223527F4712F724
+:10921000919B940A07C6279A62C6FD1CD0900EA4A3
+:109220008FC5EBCCEF13F67344EC9FD1BC63B899B8
+:10923000877A6F8D8DE86D0BE00DFDC0425097F879
+:109240007C333B4BE3C75EC2E77F373C6F66CB7C2A
+:10925000DFCDC562695983749313E964A89F3C9577
+:1092600002ED6FFA3C7A7E4437E9A97BDD7A19F486
+:1092700016E03F5CA6D939C5FCBB0DCBE8FFA4F5D1
+:10928000EEB5011FAFB9EFE98B03E3A1BFB248C050
+:109290002653F905C98FF6172FB3D8D32FEC257BAA
+:1092A000563E4B0801FFB7EF7EE1B902F2E7357B8E
+:1092B0006CF70B648FE965C67A18CCA72B75A0AC48
+:1092C000BA02501E3B508E6179AB66C7AFB96FF7DB
+:1092D0000BED649F8463FE043D59C7787CF99BD6EF
+:1092E0008F5D81AB3A319F28566C237F2FD5C48F79
+:1092F0008FFA1D54AF28277237C233EBB67E09E3CD
+:109300000D8EE0EB3E9403638A8FA96381FEC7D480
+:10931000F2341956CAC7ED2A5E45764397B62EF049
+:10932000BFD5A8F706D7A7D7B43E7C3DC295BDB43C
+:109330003E9EB25E5A2F1B9629EEC7F7E32FA9E493
+:10934000F686ECE4FB0ADBFD9C1F76F8B97FBBC315
+:10935000CFFDD38CE2BB29BE9332C346F533B4A70D
+:10936000598EEFF04B9A3CE7F8D81D8C74FB13EC48
+:1093700056781F2EAD44F9E6CBC27DD6BA62E926F7
+:10938000A4E79F68FE29ACD35DB44E45BED4085F08
+:10939000B7DFF8FD16EB563ABA757BA32542F22AE1
+:1093A000D9BA5D3E5F0C5BC5DD5ED0F0F049E39F4E
+:1093B0007E84D359EEEA77E03ECCFAE24D86BC6A71
+:1093C000D78ED93D980BADE755AF4E4BAF45B96D34
+:1093D0001EF78D2FFFC387F89DF90FA7A57CFC54BE
+:1093E000938FAFB734523B586045CA2639C078DEF8
+:1093F000CB409E9870CA49D37B03F3D0AE24D66786
+:109400006C6EF830ED572F0A880CF7C71732635E81
+:10941000198BEA79C13C0FF60D095C5340E11B3111
+:10942000210498624DD26C5DAE18F2C3E6CD9DBDAD
+:109430000FF7E1176BFBF0205F0CDF9798F2C6AED9
+:10944000686C0A3768DF8FD3DF71C2D35C85DB8D30
+:1094500073DD6ED2AFF3C2F3C30D09FB716FFE97DC
+:109460006899877E41B68E9770B8A164285E16858C
+:109470000587AC8C8C1F333EEA248EAF260D5F66C9
+:10948000FC98F1B078EE6C5A7FF3FCDF7085093FF1
+:109490006F007E305FD88C0FC6229720DDBE395F0B
+:1094A00064681F4F1767DA314F60F16C81617ED1BC
+:1094B00012164AE7F9C1EAAC6909F09AF168C6D711
+:1094C000E2A758A807FA5D7C9F87D6EF550D3F624B
+:1094D000CF5F695E619857079FD7119EBF2AD3BCA3
+:1094E0002E53CB9FF5C1F7483B485BC54A8FF0F937
+:1094F0002C82F974C843F5C90956DB8C74B2C49444
+:10950000B76086CF0CFF4C94839387EEE357646B70
+:10951000FBF8135948DBC7CFA0630D21FFB0790BCF
+:10952000837CCEE96B6174F6C078D8AFC022036546
+:1095300019F03BF379EFC679F0EF550151C13CC109
+:10954000D9F3C7ADC1F9875938A3A708EDFD7E3B14
+:10955000CA91CB1898B1D0EE429824EADB70430A46
+:1095600095F57E8F757E6A273D1E61CDDB69FF5DB7
+:10957000C9983B21B97C591570D078663B656679EE
+:109580004906CA0B333E743CCD43BCA4115E269EF3
+:109590000E5E5E445D85FE2CC6D1601DFBAF65ECA2
+:1095A000A1F2C1FD6396AF727B329BD1FEFFB5D9AC
+:1095B000999ADDD14C7187059A5E3864678D4FB8F2
+:1095C000F93E7245827CFC56B0EEDAEC043B55DF86
+:1095D0004776B33EC2DF952E778F3891E8EEA30130
+:1095E000FA20F9A5E76B46285F53CC58A6505C2CAF
+:1095F0002D7D22CB00BB98F179831F7353B61FDFFB
+:1096000017C6D10898F9FC4FD7CD5306D76DFD5535
+:10961000DB3B511EA72CF9558C3A57783E479AB63A
+:109620006E75DABA0DD8D1A5F03E01BFC73A353B09
+:10963000AC548BE3E31F281F2B56E3C3F9AFFA3A70
+:10964000A69482FF61C823EC247CEBEB094E443FD7
+:10965000F265242051CEB08DB9C83F8EDCC2F33103
+:109660001632652BE6072D8CDA8F25F613094A048E
+:1096700047647D8A163709513F8B82BC1F56CAFD4D
+:10968000BC01BA8F41FB84FC479B0B4C496C9FC9C2
+:1096900042E83F417FD9A8EFD9BA8471C60E1D3781
+:1096A000597FE676A2B67F2B3A43A150829CDEAE6C
+:1096B000D9CFC70295DDB6B1C9F1B7C8E555A584C4
+:1096C000BCD8234157A3555C4CEF4FD7DF0376221C
+:1096D000BBE6C5443BD1ED687AF1B90B12EC44D638
+:1096E000F422EEFB7F553BF1E5ECA617DB617E7FB4
+:1096F0007FFB9F287FFC5833084CC0A3373A951D49
+:10970000F5A27C90497F1536824785C9DF92321ECB
+:10971000E93D259AA74A09F9B26F662B04BFB758ED
+:10972000A5FD3268DA8DAEB8570A0988B7BBB5B85F
+:109730001910EEF8D99EC4767CDEFA784E974C70FC
+:1097400038F4F158A895F2EB6732D2237A1E88CE0E
+:10975000D77A3F47B38DF1BA51F0F3D16CFF507E09
+:1097600016C5E6776F4739F1A2487ED87702B7D0A1
+:109770007B733CE0E36C6E1F8E11231FA35CE86DCE
+:109780007CED3B3743BB153B9C2154C3CBBFF7E17A
+:109790000FAB14C4135FFFF94B16DF5785F32A9103
+:1097A00064DADF28E0711847AB40FE6B4A9123BCB6
+:1097B000039E877D75B93909701DF6355079EC0C1B
+:1097C0000ED731E8B343C1769B1AC95FF4F07DEF41
+:1097D000638A92C148AE30B22744277FBA73785C5F
+:1097E000D89DC3E379520EC7B7EBA4408B8474DDD8
+:1097F0008CFB16528CF2A05D27257AEF10044B7B70
+:109800004DEFCF75128433E22BCDDCDE41EF713E9C
+:10981000D85EF432837DE3CFE176B27F008E340EE2
+:1098200087D7DC4F3A7FAFF19F198E15D9538388C4
+:1098300097C33E353787C751B81C76BF70409838FC
+:109840001A79CCF3F52F094A2E8AEBDD2EC44B4052
+:109850003E75941E5B4372ABC8D58CE7A412EC270F
+:10986000819FBBE1E72A06EDD3FE69732A317ACDE9
+:1098700094074243EDAD772B4FCC9B8305EDFCC4A1
+:1098800095BAEC8D4119ECB977B4629332762D8696
+:10989000FA2FADE5F6D962B4CF4224B70C7697D94A
+:1098A0003E7383BE9F0374B12420C94817663BAD45
+:1098B000A3721ED9351D60D760BEF6503B8DCB9B81
+:1098C0003BA336A642BD976B45F2335E2EED7BFE81
+:1098D00042D417357685F44569FF9D73E8FB241A59
+:1098E000C7ADF977509F9F7708A5C54BE0DD2BB535
+:1098F00047DD8B13D6FBE59AA3E3D12FD89A24BF7B
+:10990000428FD3ECBD95E77FBD7BAF107722DE6E33
+:10991000136DD8EFC2720FE5AD4E13DD34CEE28D7C
+:1099200062DC493854D3A7650FDA8D4CACCD7E0D7F
+:10993000F170979DE1F9C1829BFA0C76EEC2A8D135
+:109940009E8B3483FDA39CBE1D68B6FFCC76CCF203
+:109950001CCD7EA9601568BFBCDCB2931D2D19B467
+:10996000636625D9FFD6ED98F36CF5DFD5E899F657
+:109970000F6649D6FBFB9768FE290B717F709AF83A
+:1099800011ADD7B190A420FEDCB7BC40E73ADCFFB4
+:109990002586ADC6BB33C7A1EFC791BCDD5A914642
+:1099A00079D77B6E3D2BA78FD64BB9BF16D7FF0556
+:1099B0003BC9C164FA2D252AB2629898272AD05350
+:1099C0005FCF31D11496A81FC624C953F8710E9FDA
+:1099D00087FF3666433F3B33C6542BBF54AF07FE69
+:1099E000E8748C5143FD9E4C80EF86621BC5FD756B
+:1099F000BF34C5CECFFBDA77AD8CA17F3A06E0430A
+:109A00003814800FE57051348DCA63A35E7A8E8B53
+:109A100066D2B3389A47DF4BA2E3E87946B488DED2
+:109A20009F193D9BCAA5D149F41C1F2DA7E759D109
+:109A3000F3E97936E82DAC5716ADA3E784E83FD3B8
+:109A4000FB89D139F43C273A9B9EA1E8B7E97B79A1
+:109A500074313D2BA24DF47E52F47A2A57466FA4FE
+:109A6000725574253DABA3DFA7E7B9D1367AD6444A
+:109A70005BA9DEE4E8062A9F17BD879EE74737D13A
+:109A8000B336BA85BEEBFC9CA6D9D32F05B6C994D4
+:109A90006FCF7ACA503E26E3C3439A3CAECF51F70C
+:109AA00022FDE9F5F66BE70ECCF50EE40C9F77F39B
+:109AB0009AB65E9F848EFC088FD3EAEBB63E307C6C
+:109AC0001C8195F946D8B7E2F37B2647E1F42B7564
+:109AD00092BDB1B599513E98A7B2574079D3159030
+:109AE0006658D1913BC0F3C08A722247517FB88338
+:109AF000EFEDC5FDA84B63BDBEA9482F215FEA5419
+:109B0000E86F4CBB8DDC6B85C90296950626F7B0D5
+:109B1000C1780ED85706BD260574FBAD77E62484C0
+:109B2000E7ACE20AB25FB5FDE4FDB78E65E8776C9D
+:109B300075F40812CACB558C25DAE15BD72E7A383A
+:109B4000F19C8614E0FC39661D7B1AE364459D4A4E
+:109B50003D9E271CB7597D1A533C4BE291FA54287D
+:109B60009FF948EC697C8EEF8ED7A7C1F3EC9D3D41
+:109B70004FA3F899D0D357EF86F239CFB16730FCB5
+:109B800054DEAB4CF54079D201F519DC26A9EA8BFD
+:109B90004C4D57109E785B3AC0B3F51D30B4A05CB5
+:109BA000F351A7086EC9E0FA83DDF644C2BAA414E3
+:109BB000F7AA22FC33FF26B91CE5EC56A92F25B3E2
+:109BC0006CE8FA74E1BC719EA057B66BFBE872C2F8
+:109BD0007A8402821E0FF40512E2815DEDAF523CE1
+:109BE000B02B55AEC35057FF34263FA4201D733F02
+:109BF0002175CD58D24F3ADD017E0DF6A414E074E4
+:109C0000B775C0DEB4C66F08F15BF5BF07BFFF9E36
+:109C1000A3C9AF24F87D09E7111C998FEB029C2F93
+:109C2000818F2F085425AF77B5867F339EB74AF2D0
+:109C300059842F37B3C5CA07D7AD49A3EF91F0FABE
+:109C4000EDFF65745B13181EAFACD2CBE3CC5A7E2C
+:109C50005A3279B33FC93991E6C01039C7E3A5320A
+:109C6000C8B971C9E55C6D6004F99524DFE1F6803F
+:109C70009EEF10FE7E601471FD3B6D721DE6BBC44D
+:109C80002632F213C0BE6CC7FC9D3131A582B6B13D
+:109C90005028231E2BCE263FBD08EC0DA98261AAB9
+:109CA000630F3E2FA9CCB42D2AC3BC068DDFE4A6DA
+:109CB0004022BFE9FA7E901F75BAC8EAA273164027
+:109CC000AF984FB84BC3D3603F3C1EB1F696DCAEA5
+:109CD0008E0439D815CAA3B25E3F19FDBEA57D0713
+:109CE0007941FBFD97D45AE79BFC6B40D4EC9C7EFA
+:109CF00015E93C3685C974DEB9FD08C9A74C904FFB
+:109D000042110F0FE1F8F9D1D487314EFBEB40B689
+:109D100026CFE5D4CB3DFFFFE8B9037C75E2A75A17
+:109D2000790F9EAB18037A484139590BB057A29E60
+:109D300073D0BA2B8CAFA352CBE23D02E1AD07FD4D
+:109D4000E6988D9FCFD8EFE85649EF383265CC3F83
+:109D5000D9E58FEC0DF893F3859CA694E3A2FE6100
+:109D6000F37533DD41CCCB9153B1FC2A94EFACC1F8
+:109D70003CA13EA695EF744FFEEAF1873F04AEDDAD
+:109D80008FFB54D501F535A467A0EB3F205CEA9921
+:109D9000B244F1E151EE3FE9FC39C84F72B9CE4F00
+:109DA0004D65240FDFC5FEF5FE92D937FFA2C9CF5E
+:109DB000FEC0F0F68D4EF7A76DDF68F0BE3302FFF0
+:109DC000CF7CFEB5CDDBD860FCCF93FB46AFA4A023
+:109DD000BD3D951D9D8471AF5E4EF78CC7F9548CC7
+:109DE000FF011DA454BA4C715B6186167719365E6B
+:109DF000ABC793F5789F1ED74BD7E80A2F0C403D91
+:109E00009E5E234B8BA8BF3E7619F4E709723CE9AE
+:109E10007C8D720BF7E75D6BB2A4B16583FD82A404
+:109E20002439D5D5C8E48E4CBEFF9A01F2A573350E
+:109E3000233F2FF6B248FD1F576D1F3AA1DEF14AAE
+:109E40004020CA05952972B6760E81885C267A75FF
+:109E500032D68DFE36FB41C8E5C038F7E702530124
+:109E6000EEFD9F8BF49430C20D8D2E099587B07155
+:109E70005D466D08F703C5A35006381B326A33B040
+:109E8000BC7FFFA410B388DF5D116932C497CC7822
+:109E90001AA8F79D3594AFB06584FDCF9AA043B75B
+:109EA0003B2B8268EF5CD5DFEE5006F73FF57DBDBA
+:109EB00060F19317E13D3BC165DCFECC65F1D64412
+:109EC000BB29617FB116FBD932B8BFD87B46E2FE11
+:109ED000E28ADCDBF0E8FEBF0CEC2F46CEC1FAAA2A
+:109EE000B7BB1CE953CF87DDEFE0FB006CD28B3EA4
+:109EF000C5823E16943FEB277AD4FC8921DFB5B8A2
+:109F000099D90F9E1534C6F18F87E664F4E0C72413
+:109F1000717C3D9EA7FBC118AF932DF9CE887F7D44
+:109F2000FC0502F763995D2079A7EB4D902791A07E
+:109F30009F9A513C5A750A94AF753CB45821BF287A
+:109F4000897C19D837603D2556FBAC0BB4BC13F3A4
+:109F5000FB5B825C3F2FB0F338A5B0724904C75D4C
+:109F6000107409CE043BE9EA20D75FFAFE8B23F791
+:109F70006415E2D9E1882856F336EFA35C1D64032B
+:109F8000E7DD42167A2F199E0ED83B695FEEC012AC
+:109F900091CEEB1E8F9C4BF73E24930B6F21FD94CB
+:109FA0003016CEE5E30DAEA335DEF43C19F37ED5D5
+:109FB000C0F7A6143A7F63CE97794CC3DB3E0D2FD2
+:109FC000FFDDF932FB34FCBDA4C567F478D6254922
+:109FD000E4FD79B6FA47888E4688CB9CA1E7FB68FA
+:109FE000F861CF8CA77B3936F4DAE32902C263A388
+:109FF000FDCBC63F8821B4BFF4766E93BCD0F37717
+:10A00000F472DA4981C513F611D2A46E8A93A69D23
+:10A0100094E8BD99FFEE30F19FBE2EC9D6595F1767
+:10A02000F3FB2E6D5D0E34FD5B00CFBB6C4861967B
+:10A03000F9445F048DF177731E40B27DEE835ABB05
+:10A04000E391C93928971B1DB192D1F0BD8E9F377E
+:10A05000BEFC8D0BF96CC349E70CABF57835C8FD38
+:10A0600016D0A7EB12F7413DF35F6BC75ED324E335
+:10A070003EA8AE4FF57DD0B44AF33E9AF53EE806D1
+:10A08000662D1F93ED830ED9FFD4F4ED896092FD08
+:10A09000CFB2E1CFB3EFD6E879A4BC8F2B1CFCBCC8
+:10A0A000ACF9FD8B03EBB0BEE047C05737363969DA
+:10A0B000F7A9A7C9497CB8B82985E2B28BCB79BC8E
+:10A0C00077F17D82B65F678CC3BE04F262199EAFE2
+:10A0D000D7F4CE5116AE467B7456A560D8270FD75D
+:10A0E000A618CAF397DCF312DE9BF0728D5DA1F81F
+:10A0F00033F41543BBA096E72932A5FF4E8C73EBD2
+:10A10000F1677DFD5FAE3D4AF7A0C5C0CE2F096166
+:10A11000FC5924FE7AF9F549FC5E3A61703F5C0116
+:10A120003B61C379E328DFE360D9B728CEBB01E305
+:10A13000E230D30D5FFE6606D11128E518F2EBC4BC
+:10A14000AC38CAC7C5132AB2912E9F99F8B907E354
+:10A15000A2EFDE76DC8FEBD4D7D24C7907E67537E9
+:10A16000C799CDF1E5D38D279F9B3B902740F4F015
+:10A1700092299EACCB2BB3FC4888275F983B8A780A
+:10A18000B22EB77439A1CBAF83651D6F3F04FF3C7E
+:10A190001871124C6F69F31EE04B8D2E0FEA7CF89C
+:10A1A000A593EC916726FE96F2ADF47A2DC14CE2B0
+:10A1B000C36F95C5EDB43F8B790AA583EB323F722F
+:10A1C000ED4019BBFDF6D29506FA18905323CAB19B
+:10A1D000E1E59498CBE313C9F235753E18AA7F4A9E
+:10A1E000C84E4DFBBD3DEE2AFAEA7AA8B1E9D70A7E
+:10A1F000B683E7666A3FD111895BE827333C69275C
+:10A2000045169F94F85EE1EF07F48083BEC7EA9598
+:10A21000D5AB7DDC9E6E23FE8C3969FFDCA7B6E4EE
+:10A22000427D9F5F8D213D3CEC535B7313E4699B42
+:10A230009DEF478A361679C2022F4FE56A7A9985D3
+:10A2400003D8DF9A3AE3792EFDB93D97EFEFEDF1B0
+:10A250005707D0BE6E3B5C1E40FED9EBA9267B3B68
+:10A26000D9BADDA5F313CAAF92417F62A3B6DEC0AF
+:10A27000A22AEEE3AEB1870389F1C675B93C8F23FC
+:10A280007DF293BD6837B7C936CA136C9379FE75F2
+:10A29000BB5B9AB14D6BE733B493F47354745F8630
+:10A2A000E436E6573FA5D93BC9E6F954AE4DBB5F4E
+:10A2B000B4E7DE5A6150AFD88FD4B9E8FE07A6CA1A
+:10A2C0003CBF2964C8A7B66BFAA5DE94AF21CA5F6C
+:10A2D000CD6F0BFA23BB722DFCB63D3EF5295CEF2A
+:10A2E000A81473227D445DD67CFF8CB6AE3FD0E6C9
+:10A2F0006BBE575534DDFB209AEE7D88D537FFAC19
+:10A300000FE96DB5536EF3D13D0F74EF4314AF5C9D
+:10A3100082E7DF53783E0BF87FE7F2F306A13E9425
+:10A32000AF2CE0A2785467BEAAE64359F4D81E5A6F
+:10A330000DFDB5A9F52A1E5DE974DBBA709F2F33B8
+:10A34000183988F398EA9148EF745E9C4A7A08BEFF
+:10A35000A77039C264A19AFC41BA34057D703C5F94
+:10A36000660F38289ED516617DCE71FCFC3FF653F2
+:10A37000C77AF6D716A1BDEDAA443CED0F4DCA88A9
+:10A3800058C809FD69DEFF7FFBBB6F1652BEAA18D5
+:10A39000F908FBEB6D5CBC11F7F557EC1443B88F73
+:10A3A000F09DEF1D3C839F3732EE33DF9F36A50FC4
+:10A3B000F559D4EDA07A7B3CD59D88A736C1D389C9
+:10A3C000FE6EDBE1953F413CB6B5F238B719CF7B65
+:10A3D0003DDFA3FB358EC372627DF3FD1AAC73259E
+:10A3E0005F27A78BF62D61BE2CAF8AAF23C5070F61
+:10A3F00079E81EA8E3FB9F71237C5F63DE697955D2
+:10A40000C3CD3B5F26FB45A31F2685D7E1BC6E1657
+:10A410003D9D1D3EBC270DD61BE1DE65277FFFFE5F
+:10A42000B4745AD728C087EB2A7A1A5474C9FEBA72
+:10A4300053A4758E4ACD342F1693D8767CBFEBC4C7
+:10A440000FCF473A50B368574B2C6826BCFC15F029
+:10A45000B2DA022F403F4579B85FB4EB46EAA7D3A2
+:10A46000E192D1B269F354D379E5D1DE2F5296C788
+:10A47000F924E17E91B2BC2A8BFA9A9F85FE368E32
+:10A480005B27B3CFE26C10EFC9F257CED7FA1FE8C3
+:10A4900067E4FC95F313C7D7C7FD1AEB3AFD74D6F2
+:10A4A000B5CDF57FA7A39DA58AE9A1944228E33AFB
+:10A4B00021FE719D70BDB4B80DA92005E940EEC91B
+:10A4C000433AB8313D84F43992DC90185F77BB048D
+:10A4D000F40C769D538E1CA0B38B5ABC479727660D
+:10A4E0003E6B7319E5559B7E2FDFA1D1C92BA09739
+:10A4F000AB71DDCC726BB474B2324F30DF43B33228
+:10A50000CF9F9C4EECC1F08D8877C4535E05C52B60
+:10A51000BE8BF5F7EF177738C6E2783C6ED61F642E
+:10A52000F2430979593A3CEDB8D9CDE3D414FF9000
+:10A530001A19C33C386F694890CB464547ED89F0FE
+:10A540007D037474D77074E466BD745E63B99E9FB6
+:10A55000B363F8FC9CAFAB7F603DBB109E36CFF77A
+:10A56000883ED7DA5D32BF47EDF4D6F5D1A1EBFADC
+:10A57000E8F0EB1A791CBFAB79D5748F11AB692267
+:10A58000BB69975F7D13F3C5981432C8C521FCA33E
+:10A59000C9ED9BCF54285F7577AB26E75A9D32DA19
+:10A5A000E3CFFA6E7C1CEBDFCD9430C643A7D856C0
+:10A5B000119EFE0AF37B284472B514F77DA22C3558
+:10A5C000A4E9D1A7110F339456210BDEFB162836D0
+:10A5D000BA8654D9C46C65A3C7C34B43E5E04B238B
+:10A5E000C8C15E8D9E6F427AD6CFDB279383874E9C
+:10A5F0005F0E1EFA86E5E09FF34E43AF7F03F2E65F
+:10A600003384DF2C6FDC1A3F5F1962218C978F3601
+:10A610009F0DEC4D05F9AB2EDD45F4D3F68440F9E2
+:10A6200052608747A8EC7191B0D9EB71F0FCDF1D47
+:10A63000FCBB58CFF16CC6D39779593CEFA67B652C
+:10A640005832E449C5881FEE528FC9C522E6F7D7B4
+:10A65000123D7B357B46CFEB4FD7E4FF809E9F6951
+:10A66000A3F1BC055CBE7BC1DE41BB88497D0CFD0E
+:10A67000F89BF378FE3EF003D1378C12467EC8A8D3
+:10A68000914C795A9C5FFC12B777327D4C205D83E8
+:10A690007962F0FE04D813783F41A66A6C7773EABA
+:10A6A0009502EAADBE2677B340E7F4C37B7E0CE5A6
+:10A6B0002CCCF702BEF1CE30D6F7B384B2857F1E24
+:10A6C000AB67A598B75896AFF9E90E1620FDA8F923
+:10A6D000E9FA7D81E2C8795F95F9A3882F9E97AF4B
+:10A6E000E79918F571770AB38CAFFD473E975B0D7C
+:10A6F0007D75F56857AFF230B2AB56A1EEC472A6C5
+:10A7000083EEB509EDA97459DD5791A9DA0CF7F379
+:10A710007A67A41AEEBDF587B30CE59CC65C43FDD1
+:10A720006064ACE17BDED2B30CDF0B9A2B0CE5311D
+:10A73000D1F30CF58B00C189E571EB2E36D42FE9EE
+:10A74000BCCC503E73F3B70CF5C7C71719BE9FFDBD
+:10A75000C87586EF13BA5719CAE7ECBCD550BF8D40
+:10A7600059DFDFB9219FCB29E0779263ADEEFA463E
+:10A77000FA1D0DD96188F32FD1EAEDC9AC2EC57849
+:10A7800048DB91F252F287D3CF1BD61F36CBC5647C
+:10A79000F2D8FCBE5D1BEF93A7DFAF5E86748E42DE
+:10A7A0001EE4D227EEB7D6E29CD697F1BC04FD7723
+:10A7B00031CCF7F20FEC534A2ACD67419683599D6D
+:10A7C0000F5892AF58EE2FB40B2117EE1525C39BEF
+:10A7D0004E8F23E1ED4EADDED7C5DB21C118074218
+:10A7E0007DF284055C7BF307EE3B78389FEBABCAC8
+:10A7F00054F230F83D0EA7AB4F7438409F3C915F48
+:10A8000035343FFC93C6D7AEBE5FC1FA57F3FAB6F4
+:10A810005029AE4BB27DA5BDF9E67DA5AAA528E7D6
+:10A8200016785285C4FB9A7FA5D5D3E3D96DE99FED
+:10A83000D3BE529B23543A9A7DA55FE19D1B558858
+:10A840007F858FA7AFAB5D0DC896FE9DD98E61CF7A
+:10A85000E33D1831B74479C366FF2EAAC96DDD9F69
+:10A8600093F6D691BFDFE61E4B791F6DEA2AD29789
+:10A870009D49FC5CD0977F447C4EF5DC64F0E70694
+:10A88000E3012A8D076DC96E6A4BF0FF715DD5FB40
+:10A89000F9BDDADF801FFC51FE69D8090AE37EF0BA
+:10A8A00071C6F1745CB5919D701CEC0494BF6B246F
+:10A8B00046FBDEB14A41B1F28B3B576BF6E16A8E43
+:10A8C00037F37EB7D9CEB824B492F0B606E8C955AE
+:10A8D00089F1386EFFAEB1F3FB37656F3880FAB699
+:10A8E000DFEF600F01B47BFD3C3EA7E3E5ABCAA3FD
+:10A8F000CC8221767266C13076F234B1AC1BEF6D3A
+:10A900003D7692C745143C8AE8C37BC8F9FAAD7A14
+:10A910007E4E6C05EAA922A919F3D745A664205EEC
+:10A92000563C27B2B88072CC989F6F67CD3FC278F3
+:10A930001CF3F1F731E66A453B29A3C6A8C7325597
+:10A94000A31EF3CEC832E935A31ECB6934EAB16049
+:10A95000C4A8C7F2965698F49A518F8D89D69BF465
+:10A960009A518F8D5B779949AF19F5D8999B8D7A5C
+:10A970006C7CDCA8C7CE7E649549AF19F5D8393B0D
+:10A98000571BBE97F77418BE4F7AEE6E43B9AAF7FD
+:10A990000143FD730F3C64F83EB9EFFF18BE03A2FC
+:10A9A0005FC5F30C780F2D2EE2F91F3C69FCCE54E5
+:10A9B00007E6E35F8FE733611D2FE8FFADA13FD6C8
+:10A9C000C9CF2DC4E03F5CAF3FB308DD0300726C1C
+:10A9D0005F1EB4BB212E847A18EAA727DEC77D9BB1
+:10A9E0006B0322F9712B30D88AF4F0A8278EF4700B
+:10A9F000CD66E3F9876BE3C6720CE847C1B802D0B5
+:10AA00000FD2D7F5A6DF8D007B90E8ED7A456A4638
+:10AA1000BBD24C5F7FD6E92BA6BE8AE739F4F9EAB0
+:10AA2000F3B3EBE74F35FA5335FA63E22E82FBFAC4
+:10AA30003C917E7F479FAF0AFFF1EF1F39701E27C1
+:10AA4000760ACC8BFBFB2CB62FCF623E37ECDCE4D6
+:10AA500040FE34CFCB3C8F21766A81715F719AE8DA
+:10AA60000E11DFBD2E923EA229209F3DC6CFEBAD39
+:10AA70007A5EA47331C887E82F88B146C2CB0AC07A
+:10AA80000BDE1BAEDBADC7B476C71E14E97CF34802
+:10AA9000FCA868F870068CFC98A2A49AE8C988DF24
+:10AAA000B452237F5EFFCE450E945FFB00DF420D64
+:10AAB000639E90915FAF1797D13E9F8E6705FEC34F
+:10AAC0007125307571DE37C0BC7B94A1F85DBA6B1F
+:10AAD000D3DA3C0BBA1909BF8F1618F7E9F4FDB9A0
+:10AAE0003AC08EC322AF54C7DF2EBFFA24CAC76450
+:10AAF000FEF0EE02E3BEFA28FCE1DD89F2F61BF07F
+:10AB0000879F2F1856CFF5CF427FCAC9D2431D1653
+:10AB1000713F89C93D18AFB537F3B8DF60FCEE1B54
+:10AB20008FF3BC5B5045F7CE919E4B91F4384FE8C4
+:10AB30004004ED938CB342981735DA38C75F0A8624
+:10AB4000C439FE52307C9CE34D3C4FA866E436D8B5
+:10AB50009099A45029DDEF8C20F03CA44F118F4335
+:10AB6000F2758BB3B4FC6365D8FCE34BB4FDDDEA4E
+:10AB7000807A12E180FE3EC7E7C07D6C957EEA27B1
+:10AB80007D847E62F5DC5E8BD93C9D6DDC5EA37DB1
+:10AB9000A66F208E915E887EA99BE3BFCDC1E3B6F0
+:10ABA000A71B670B160EC17BB07018BCFFFDED1C18
+:10ABB0007E6E3504D6417972FAD6CF61EAE5F59911
+:10ABC000467F796D0587AB441BFFDBD9DC1F985CA2
+:10ABD000C8F94FCFBBC4BCC5940A28CFE4E794F4AE
+:10ABE00073AD7A3F930B3D54FFB340FDE4423FE623
+:10ABF000CDF2FB77D6661AEFE1F9B8A06E32CE6BD4
+:10AC000092D6FFE442C6F399C772B8CC79A77FD336
+:10AC1000EAFFADA09E9E788E16FD1287285AE27339
+:10AC20004A218F13E8F7DE4CD7CFCFDDC7CFD799B6
+:10AC3000EF5D003E79037F1FEAE89D76F2F7401F43
+:10AC4000D1F9B92579FC1CA2F93E8548A9BC0FC5EC
+:10AC5000EB095666792FCF903C8743B750FEDDCB8A
+:10AC600093992C0447CE7BB8BCD0783FC257384765
+:10AC70007765E128F21E166AE7E8FA52B91EEB0F73
+:10AC8000BAE20F59F8BB516D9DEED4FC5ADC9FC659
+:10AC90007D72BCDFDB6ABF3C5AC8E967B4E7AAEF44
+:10ACA000764422C8B7E673D5C9CE53F739FAD6E44D
+:10ACB00020BCE35908EDF79C05F29E1CA897DAA08A
+:10ACC000D0F9C7B5452CBD06BF97DB4278AE2373DC
+:10ACD000AEBCD68E7C5ACCB20428F7C5E6D0F87745
+:10ACE00036325904B8BA0AF93EFAC2DB3EA5F1FC85
+:10ACF000B5303585CE9D4F47FF2CD6C8E8DE42F3F0
+:10AD00003CEFD6F8C5B586DF9393516C9D877FB72E
+:10AD1000468F20B736215FD415B31DFCFC2C3FA70E
+:10AD200080D7D253FE662895F6052F8575E3FBE79D
+:10AD3000BDB47E3705A6DE8FEBA9F39B43CB533022
+:10AD40009F27EF2A3CBDF3E4A90BACE1FD9DB6DEE5
+:10AD50004DFEF0CF10DED4D24EFEFBA55F9E3A250D
+:10AD6000566B3FEDA860FB4804F55F0AE83F019F82
+:10AD70008A4CE768994BA0F3B02EA599E82AA5263E
+:10AD8000E4C5DF456357D918DEE332556BAF363281
+:10AD9000017F4F827201494E9B7E5F420DB5B742E3
+:10ADA000FB69B86F16C2BCEFD052ECAFC19D2A63ED
+:10ADB0007C33A5B8B90ED7EBD985BC8FBB939C97D4
+:10ADC000D0CFD90FDE3FB5EC95BDB509F70AACBDC4
+:10ADD000FA15E3FD5357BFF275EE9F3AB8F5EA57FF
+:10ADE000FE27EE15D0E51BA8213BDAF507447E8F40
+:10ADF000DE5F9FBAC28EEBB0B68E7523DE639F0313
+:10AE00009E5D8378B6D7879FDD8276C9AAF410FF4E
+:10AE10003D91D87710CE77D2988CEDF57C43819513
+:10AE200092BE9EDB2890FDC0A4FE1BB03C7F579ACB
+:10AE30008CFEC35F9F7AB32006F4F9F6EDC73D9808
+:10AE40009FFAAED4EF41B83EB8ED350FE2EFEDDB3F
+:10AE500044CA43A173DF0979625F6AF4B5604CF8B4
+:10AE600038D2D7C296FFAA4EB4CF58D44FFAFEDAE2
+:10AE700038409C68F73E9266F85DD1E5DD5E435947
+:10AE8000D7F3CB9DD6E7E62BC770B974EDA35D8EE3
+:10AE90003C05C78FD8C7C03C3FD0CE017DB0C3436F
+:10AEA00076BC0ECFA247CB1D680FBFBBCBC97A289B
+:10AEB0002ED86B676EAE3F30EF22C2871E02E7BE10
+:10AEC000DD790EE4B32502EB771273B37D88EF3F93
+:10AED00069FE9F791E4BDE961DB8BE4BEA583F9E19
+:10AEE0003B5B7493B0F666A8BF28E226BFDF3C4FF9
+:10AEF000B3BEB906EFB311ACEE816BDEF73BE8E70A
+:10AF00002AE807EDCF259DC6EFC79EBB71DF161857
+:10AF100077C74E07D98BD78C10EF1F3F46D34BD541
+:10AF2000ECDC53E348FF654C5092DB1DBA3EFAA0BF
+:10AF3000855192CA5FF0F77DE1F9518B4CCFE385E3
+:10AF40000AADC7F53BF7ECA3DF16967AAB51DECD21
+:10AF50007C7E71DAB7D8605E517557DB335B88153C
+:10AF6000F47CD51E8AEFD568F7BF5CA39DFFA83A95
+:10AF700060CE57DDF3ECEFD06E83F99FCEBD3D0B75
+:10AF800046796FCFB1E7A6A6D1F9001D2FE7025E83
+:10AF9000C4AF8F9764ED9627F9DD169D9F8E6B7A6F
+:10AFA000F7AA6DB3D7E6C2F86D4FFDB910E3C7310C
+:10AFB000C6E9BBEA41FEFB3F55EE6CA23717D267EC
+:10AFC00010F16ABAE721C6DE6009F47DCDAE34A285
+:10AFD0009300D843CE1A7CC3E9B50AEFED44FA7E5C
+:10AFE0009DB77769FE6D64D7EDBCFEEF1CB23340B0
+:10AFF0007C19B0D1B32760ABB1B867CB7CBF58A781
+:10B00000B1FC89BDAF10E5CA35263FF413C13A3F04
+:10B01000EDCA3163497E5DA5A8D3310F60090BAF3E
+:10B02000E5F15B7E6FCF0752E7BEEF23BF6F13588A
+:10B030000CF0B4FC378FFD2BCAB1EB1EBF2F1DE502
+:10B04000D8875267368EB76CFB9A74BC5FE60329CB
+:10B05000968EED3F8C737936445F8E11B47D293521
+:10B060005D00997C03911AFCFFAAFEB5B7C2387F38
+:10B07000033C23DFDFB0E31F54DEA7BAFA5900FB1D
+:10B08000ED9B8E705CDBE46E6E0DA17F69E4CFEB0F
+:10B090007E765FB642791EB13C0D7F79D8EE866D23
+:10B0A00076CAF3453F1E8759C1FA697EE6F62BBA88
+:10B0B0008F3A505ECB36D69F7FFED0EF602139901D
+:10B0C000DF56ECD8F0A9988ECF0FDFC2DF835A612C
+:10B0D000B24F976AF2DB4CFFBF30D13DE087E20B05
+:10B0E00031808BFF1C1397E36D3FBF7FE26180EFE0
+:10B0F000A36D2FA6E3EF4DE8F4AFDFF37CAC7BF15B
+:10B1000042C730F7087DA2F1C9807ED0F493B21314
+:10B1100000CB81E22EFE5C66EF493F1FE6BBACCB65
+:10B120001E429A5FF698A8BAD1AE3AE8247B64D959
+:10B1300063C7896E97096ABF407A8EA5A31CD7D7CB
+:10B14000EBFAC7FE341DE5F4F54191CD0456BCEE93
+:10B150005727787DA0F314A87FFD1387A77F1FCB07
+:10B16000204F5C16EB35B57B8FA3CF6DB15EDD87CD
+:10B17000A7637CBEEDE77FA7F5F870B7C0728A863B
+:10B18000B65FDAF5278A837D040BE3CDE4F8427DD0
+:10B19000B3A25B6C726458AD5FCFACDF56D277CA96
+:10B1A0000B1F691D378C615C3FFEE6B15FFE16E048
+:10B1B00058FA96333413C7FDE58DE90CE8E0CF5219
+:10B1C00033A7FB1FAFC946FDBDD41ECB96E9C9DF2F
+:10B1D0002FDDFA5DA2C76B7EFFDD6C6DBF2168239A
+:10B1E00079100BE23C973C388FE679358B103D2E79
+:10B1F000FD31BF67F104F8D9567E42A5C2E59693AA
+:10B20000AD9C78AB0FE526DED902703818BFAFEBE6
+:10B21000559EFFEE64976524DAB90E85DB7331160F
+:10B220007F07EDCE15A09651AE89BF3F311DFBB90A
+:10B23000A9486A76527CD4FAFE9AFF075C96D1033D
+:10B2400000800000000000001F8B080000000000CC
+:10B25000000BE57D0B741445D670F5F4BC425E43DB
+:10B260001E100884CE3B488803492001D481400C3D
+:10B27000CA63025151220C014380BC445670F5DB75
+:10B28000740820B0AC06659515740704C5E706047C
+:10B290008135C2441483EEC128AC8B2F761004791B
+:10B2A000C980B08EFFB2F2DF7BAB3BE99E2402BBCC
+:10B2B0007EE7EC7FFEEC598BDB555D5D75DF75AB92
+:10B2C000EA4E1583BF04C6F23E1ED5DD9BCE98859F
+:10B2D0005D30DF9BC5D845C6A467EC8C5531A3EC27
+:10B2E000B532FABB12CFD889F5962EC28D5076634F
+:10B2F000650DD0FE0AFEDDD2564E9704C6B2A9F9FE
+:10B30000276C106395F82F09FAD974227F0DF4CBBE
+:10B310006244161EC3E167A218B395845487E7C040
+:10B32000F70E1E35F7847A39CAC0926D50DFF20DE0
+:10B33000C1CC1E2D617BB5FFAA1D16E651C703FFC8
+:10B34000AFDAF08D99613F06E6EB35B47D3D63D50C
+:10B3500019BF8EC279844BCBA13C61F6E5BF85DF76
+:10B3600081EF6E84EF94AE82F6699AFEB69EFC9CE5
+:10B3700065607B73DBF378FCEF423E2FB138DC1560
+:10B38000C2D84C9826CB6D3FFF055FD63EFAAEA6DD
+:10B39000BF0C2934EA7830FC63301B7C456C7B9F02
+:10B3A000AD8D66AC47FBF77FA8911F7DD7846FCB2F
+:10B3B0008C41937293FB05C453F96716BB0C782C30
+:10B3C0007FED92D9003013982FB92B63A75FDDF37F
+:10B3D000E93D309FD30DA6A831F4554798D0AD0D67
+:10B3E000EF655BBEC95F03ED4D80F720A067E5D632
+:10B3F0001FCC06681F93C77C1618FFE9282763FD3A
+:10B40000116FA6AFBD1ABCE5C1736F088D23D610AE
+:10B4100083A52796415919C5EC1E78BFF2A06897FD
+:10B42000105FCCB7C416D2FEFDAA86A30174D1D793
+:10B4300033E6333BF1BB5B7F7B5E0CD3E2DDF8B5DB
+:10B4400057837715CF8178BD3B00AF97587A387C0A
+:10B45000869D7A794E1F577A7BFCAA78FDAE8621AD
+:10B4600093B73EBFD047223C4B3BE043DDA1AE51FA
+:10B470002919FB9469F038FB95B3C4BFFFE821326A
+:10B4800011F8A672C38F4B90AF00AD3E0BF06FA5C5
+:10B49000FB3CC18B1D561F23B8A948C8E868DE7A5B
+:10B4A0007C06D6F742A466B7D1DFB490C9A1D0AF6D
+:10B4B000EF6DD1BD1E86764EF28545C0FC1607B1F4
+:10B4C000A94E28CFD914B8AB0AB3A9D3609CE7E43E
+:10B4D0000C9B8CEF05B1490D409F734E5F58D79080
+:10B4E000B6791F6914C32468EF75B3828690F67C21
+:10B4F000C8581D7DDFCB3AABAFA5718E122FBFEEC2
+:10B5000085EF5D908DCC02DFF3D6FEF0BA17CA63EB
+:10B5100046AB0DF134A3F6AE306680EF37268E9F32
+:10B5200004EDEEDB07F8A3E939CC3D00BFD3F9D435
+:10B53000D9B74C7E6A18CC4F0CCDDAFB16BC5F0A2B
+:10B540008815815F67ACD0E3673673867BE2516E06
+:10B550004D6D7C42FF759B3DF0DE4C5748F572F80F
+:10B560006ED95A7DFDECC6D3C45FB303F8CB85FC1E
+:10B57000D5A33D7F6D54F96B001B80FC354A0C311F
+:10B58000203F9F6B16DD1678E7C222135B02F08521
+:10B59000570537837E2E34422384777098C9D1C4EF
+:10B5A000B72A9FAB783B83FC97DA1E9FADF5DBBED5
+:10B5B0001AF43034297FF38B8C35509E79F3B39491
+:10B5C000B710DEFEB7B82F58FBF679BB7E9C42E37E
+:10B5D000DA656138AE73BBDE8F7B18E13F5BECC888
+:10B5E000B7E7165A1C0CF5DDAE507732D6F7067E5B
+:10B5F00000BAD7BDFD4306EA7BC616111D5B243396
+:10B6000095171AFF7958C079345A249C47D52E4093
+:10B6100002BC5FF5E72037C3F7DFFE61902BE497AC
+:10B620009B4FA599B9883F43D9A42DC8BF5D990305
+:10B63000E753F556EEF3B5F0FD8AAD4DE6E9509FC0
+:10B64000B7FB5F19A88FCE6D6932A3BEFACEE47D39
+:10B650008E017F7C214DAE37019EBF0B85CE7A32A5
+:10B66000362F7E8D530EE9082F1C0FE7000F382F61
+:10B67000C04B993BBD737C5CF8AFC5C7F929F8FD99
+:10B68000F2C6C14C8CD7E24570F0E7A16EAB40F337
+:10B69000E7CF77FD90C142AE3E5F5BBC99E4FDFF12
+:10B6A00097F966C4FFB7D297F3FB9B12B74B817C27
+:10B6B000DF9EAFB73F48F0EBA1761AEF35CAFBB873
+:10B6C000FFDAF9FFEFD0BBFCBF76BE57A3F73E858C
+:10B6D000DEA1360BEAADB7FF15C7AE63DEBFFD7F57
+:10B6E00074DEADFE8FC16ECD82F17DCEDC770C179E
+:10B6F000C82BE9D01FD9112F507BA6AC3BC6297EA1
+:10B70000451DFB7AE434F8AE0CFE04FAFB75215FAC
+:10B710001B0F02DC027E02FA170C9D13C0434BD1B3
+:10B7200000F772B4DBC66A6603D8F4E97482279521
+:10B73000FC68CC82F677809F87EDF7D77A67D44292
+:10B74000FDFEAE06A90EE0F18E89C95B01B6F514C7
+:10B750006DB88EA973645A25CDF8C6E7E8D723F7EC
+:10B7600004AC2BEE9AA4AFBF93AD8F36427F779691
+:10B7700099981BA6744740FBA7E26D34CFBB58F5E0
+:10B78000625BC8F5E3E9783C5F9FD5B181CD12E2F9
+:10B79000C521DA37B2F678638837C44B4C265B6E26
+:10B7A000C7AF788D0701B628FE15FC913CDE116508
+:10B7B0007D01F1646173D983D0DF25C9588DED2DEA
+:10B7C0000CD68D7CDCC215A13DDEE04F320E225737
+:10B7D0009C4830DEF100433CE3F33E31BAF769DECA
+:10B7E0008178BE7EBC2E4C7E0AF15A146A77235FA4
+:10B7F000389E8F36C2F7EA00CF82D0864F154F8130
+:10B80000787F0B7943E397AB653AF34D41BF338CB7
+:10B8100085D99743FF61D65ECCC8E7E1B3F4C0C2D7
+:10B82000C670BD268E600DCB61BDC6728C675AE7AF
+:10B830009540F59E87E1BDBAFBE17DC46B2F2639AB
+:10B8400089FF8B6DC7FBE132CFC5AE04B7F99F1FEF
+:10B85000E580FF194F25F1ED471BB8BF7969D81B6B
+:10B860004B0680283198B33C08FD5CE54FF616E3A3
+:10B870007B2233D871FDCB1C0EC93608FB65B4AEF4
+:10B8800009CF31E8D6BF5D1D5D74788B2C88D0C19F
+:10B89000D1CE9EBAF6DD2725E8EA7BB86ED0D5C7B3
+:10B8A000960DD4C1BDAB87E8DAF759304207C7CB54
+:10B8B000B7E9DA272E9DA08393EBEFD1B54F5D5DFD
+:10B8C000A2ABEFEB9EADABEFB769AE0EEEDFF06B68
+:10B8D0005DFB1B772CD4D50FF02CD7D567363FA155
+:10B8E00083B35B9ED1B51F7C68BDAE3ED7FBB2AEC5
+:10B8F0007EE8B75B74F04DBE3FEBDADFE27F4707CF
+:10B900000F671FEADAE7590FE8E051B62F74ED6FC1
+:10B910008D391A10EFB0C90F64A11A037E02391BCA
+:10B920002D9DD6B587155A31F28D49E187DBD3BEFF
+:10B93000D7D58FB5FF53D79F9955031190ADEAA97D
+:10B94000ECC21AA80C612D543ED4DF757B02CAC329
+:10B9500073F21264AAFDB93FC4A11DF968D803327D
+:10B96000F2DDA518661307C07898CF887C6D08BEF5
+:10B97000DCCBA5891B85F945E6C9043EF40B54DAF6
+:10B98000FCC1CC13097CE80FA232C21F49CF23FDB2
+:10B990005DA98CF2C7D2F3687F0F2ABBF913A9EC1B
+:10B9A000EE8FA732C6DF8FCA1EFEBE54F6F467D2F2
+:10B9B0007BB1FE0154F6F20FA5E7BDFDB954C6F9FF
+:10B9C000F3E8791FFF702A25FFED54C6FB47539912
+:10B9D000E09F48ED12FD855426F927D3F364FFDD7F
+:10B9E00054A6F8A75399EA9F46659A7F0E957DFD68
+:10B9F000B3A8BCC1FF00BDD7CF7F3F95E9FE87E963
+:10BA0000797FFF435466F8EBA8BCD15F4BA5DDFFFF
+:10BA10005B6A37C0BF8CCA81FE27E979A67F25956E
+:10BA200059FE35F43CDBFF072A07F99FA772B07F68
+:10BA30001D9539FE57A8CCF5BF44E510FF1BF4DE79
+:10BA400050FF662A87F9DFA2E737F9775279B37F8B
+:10BA50000F3DBFC5DF44A5C3FF213D1FEEDF47E516
+:10BA600008FF017A9EE7FF98CA91FE2FE8F928FFA8
+:10BA70006754E6FB8F5279ABFF089505FED3548ED1
+:10BA8000F69FA4F236FFF7F4DEEDFEF3548EF1FFDD
+:10BA9000939E8FF5FF48656B3C619829402FB6EA6D
+:10BAA0003FC3152859484487F1B6D6F7157DBC32F7
+:10BAB000F83986718F71D502ADD39F0EFEEE5DD23F
+:10BAC00093B91609E1C5D8B407FF8EAD1B63F7E241
+:10BAD0003F24C69A722DB47EDFFF3FFCBD25C38F85
+:10BAE0007EF900DAC7FB2D0CED63A0FE55BFFB51BC
+:10BAF000CE9E68F4C3960CF49663FCE577F1DE62A3
+:10BB00002CB727707FE4F5046E6FB72518A87CBCAE
+:10BB1000BF8DCAE2FB93C3294E15756DF3BAA4D845
+:10BB20007DB5FD1F921438C41747F6E21AFBB9D64B
+:10BB3000768BADBFF923C6751C7546167433C046A7
+:10BB40006EEFE52F43DD1B614AF288EA1731CE2301
+:10BB50002FB4D8EAA210CFBFF913B65FC098D302B2
+:10BB6000E53309AEFDA8177E088A73837184BFEAA6
+:10BB7000C113427FD1FE3FFF5FEEFFF8CFF5FF77A5
+:10BB8000858F6E4D749E4A40BFC0E8C8403A8C58BD
+:10BB9000D8438C82F7A7AD106CC847D3170DC847A0
+:10BBA000FE18C81C1427BD37924D7576E0974524C2
+:10BBB0001A14FF4232DF05E339CB9807FD89128959
+:10BBC000115F96340A6E99E2D08EB0B160BFCB148B
+:10BBD000BE2D595A6B9E0FED2A7AF0781973F378BF
+:10BBE0009915FE877234A77EDD5E0A378A97293E53
+:10BBF0007609FD5E609D399BDAC763E7639C7987B0
+:10BC0000D98676A3A221209E1B10370B8C9705277F
+:10BC10008646A1BC323BB3F3387748E9DFF07B2C92
+:10BC20004C12A3AE8E17353E2B31A93BE27194988E
+:10BC30001E8EEB980BCDC9E10C4B49EA8EED5C40B2
+:10BC40008B162805A36B303E077CCA48575F6DB042
+:10BC50007B3D8CEB08D813291385DB35D88CF1C8D4
+:10BC6000CF7BB3E502518DFCB0AA0D22F9F5DE853C
+:10BC7000FF5C8271EC59F1465A074CC3983B8E6FBA
+:10BC80006757B72C50BF8477DF6B02C55D653637C9
+:10BC900006E3BA9AFD10F26B9D8BA3C7E5209D9633
+:10BCA000761D68415AC98E4F93BA69E8B3A88EF0E1
+:10BCB0005A1213C9E9B3C3447E2DD0A716E933CB7A
+:10BCC0006D3AA6C5F32576D98CFB31254BCF13BD34
+:10BCD00066B7D14BD7AEA2BE89E80A74D23DAFAAEF
+:10BCE0003EA1C6D18FFD1CBD86272AF14D855E1869
+:10BCF0003FBF0B2B1F8924FD50BCD0935CADE1D31B
+:10BD0000C07D89A41943C29D200F053D393D98D1BE
+:10BD1000DE0DE9F9FD8A6CA257209D0A7E9A4EF449
+:10BD2000609F87B28D309E7B13D9D409F07CAA1214
+:10BD30007FBDB76E7401C6CBEF4EE4FAF223587F95
+:10BD40003A60FDF9718D953940351FA8B111FCD7C6
+:10BD50009A1882FF562351F9594D1A95C7CCACACAD
+:10BD600041235FC000661CDF5445AEA626AAFB52E5
+:10BD7000F36230EE5EF0D3816C03AA50B9A170D4A7
+:10BD80004DB8BE002468F033A928987C6915F69A4E
+:10BD90006CF931A83F9609F68D4857E7505D7B96C0
+:10BDA00096D906A3FD32727E02BE588FFC77F798B3
+:10BDB000485DFB3B97C6EAE0F989128DAFB0205190
+:10BDC000F7FC9EE27E3A789A1FD6F3F0A924A9C028
+:10BDD0002043FF17FF62227EBE583DB8FB7C0E1346
+:10BDE000DF05E2FF9859A63882BCDE6247FDF76D99
+:10BDF00010E7EF6FFF2ABAEB68DD2B53DCE592D535
+:10BE000026E13AE5C1E9721CD63F180C2EF900C4B0
+:10BE100097C8307EC05EB690FE9CBE5A6032CA881B
+:10BE20008FD17A79DE4B169AE78CD5227365129FF3
+:10BE3000C461FB79D112F5776FA2D480FCECDB688A
+:10BE4000B1AF87DAE95EE57D6120ED8354CCFDDB9F
+:10BE50006123CA434A4B06C6F78BE33DD1A807CFFF
+:10BE60006C30D1BE5785B8AE34044834E7776F8460
+:10BE7000E54A247E84DF531F47AFC3F9B7CDD74DC2
+:10BE800071116F1FE7B38980CF53A5EE0C5A273F7E
+:10BE9000C2E3F1EDF1C2484FC986306923CE77BACB
+:10BEA0006BB02D5D6B0FF9BEDF7493BD9B3D1DB96B
+:10BEB0003FAB07EA81632B4C05187701BD3F0EF1BC
+:10BEC00074AC3ED2B09C16555B88BF4A8C9259FB2D
+:10BED000DD9215A283DA837E2F447BBD5274B1C1FB
+:10BEE00008D753FFF252C185FB4E492CA73BF2ED18
+:10BEF00003F70FEE8EF398D2C93EE37720332ECDB1
+:10BF00003ED6ECB745A71BBF97E53516F5D78E9FF4
+:10BF1000C781925C4B7BCD453A6D0EB22F9750AFE7
+:10BF20002686E33AF5E441B01BF08D59754D1912A0
+:10BF3000B05EF903DB890E65E31A523CF0FC63AB9B
+:10BF4000EBFD4498C2B73D1A9E1A8A71A2C6E7E378
+:10BF500064B4830BF8FEDAEC9767F5D1FAF3EDFDE4
+:10BF6000091663C8C1C2D34D00BCB824968FF89D92
+:10BF7000CC1A94F8859BC627A1D2057CD8CAF9FEB5
+:10BF8000DB74837DCA812C447FA80DE9A2F677D4A7
+:10BF9000C4E35C9F270A3A3B1C9DC4E57BBA81CB76
+:10BFA0001DDB25109F02C13E4DD2D8CB2AB682ECB4
+:10BFB000654CACC870DFEE646284A217B8FD9B8349
+:10BFC000F60FF7856D02C947F9268BDB0DFC9598B6
+:10BFD000C4E573B6F9B5A70662F3F86A337E67D68F
+:10BFE00056813D034D4F99DCA52DB82F655BB728D1
+:10BFF00082DE33D9DDC8A78A7EB7824240BD3013C6
+:10C00000FF09F515AB04B787F8C549766806C64D34
+:10C0100070FD8F7A5EA347DAE9F700BD7E1FD3DBA0
+:10C020002356AFB72FCEE0502B8E73F62AEED7B63D
+:10C030008D4764570057A52EF7DE71345E81E222EA
+:10C0400081DF9F89E3C3F1C2F83CF6EB1F4FA99D46
+:10C05000CB6979BDE07677303E15AFE1C39884F6C1
+:10C0600079CE06C18DFC382AEA7EC2EF6CC06F24FF
+:10C07000E2557686DD05702930929BE22B1CFF5538
+:10C080006B39FE81CE9F68EDEE37513E33E2F51BF2
+:10C09000B09F32EE0756FF4074DF0BF445F99DB5B3
+:10C0A000D96DC68DC8D3AC3E2C04F97EF5C77B7123
+:10C0B00059F0CDAA37BAE1FAB538C2936C00BD1574
+:10C0C00029473C5170531BFF05DAEB767639003F68
+:10C0D0003273921D6A8727EB8A16DCF76E473F257D
+:10C0E0002E761FFE0BF073DF06D11194A16BA79C77
+:10C0F000479089FFCB641FF9096530CF3A1B3E9505
+:10C10000F3112FF7D919E9DDEB1D6FE03899584C81
+:10C11000FC89713DF443FEDDF106FA1F85493FEFCE
+:10C120007F04EA9140FFE34B93C3B010FDBE8FF94B
+:10C13000BEF845A3A737CAEFC5A8043BB468D3A38C
+:10C14000D103BBA39E57F568A962B7D47EEF437BAA
+:10C1500005F0F1D56F8421DD55FACF443B91DE66C1
+:10C16000271E9C0EFDC3F71EDC1E44FD9F1D0B7693
+:10C170000AFA2C7EF6FD30A6D17F0BFBB82A92502E
+:10C180009FA8764D5C176703FE52F5E5D5D65D9DF9
+:10C19000CE2B24605EA1FA7995E0BC32DBFA9BAE2F
+:10C1A000CCEBEBA57C3E4757F0F9CD68372F6EF707
+:10C1B0001F7CDE6297C92FF044A31C7EBB596475B7
+:10C1C000445FEE375CB2023F0DC0F8CD0AB2EB27F8
+:10C1D000A39984719D4EEDF74A0BF905B3B6F1FDB5
+:10C1E000D653C2F0EEB4F1FFAE27EC2194EB2D2232
+:10C1F000433BD4369E56BBBD2A295A63B7AF116F55
+:10C200001867457B5609A843BEAF6CECCEF09CCBBB
+:10C210008AE1AC41A47D782FE93160218A4F831FE8
+:10C22000AE8B375898DD6A453A75127FFD47F2F9B3
+:10C230002973091FBE14C4BFFAFDAA2E1E5377F43A
+:10C240006B360BE4D754CC1B1E369CE17778DC6C44
+:10C250004B12B753DB143D2738AA292E063E8DED2D
+:10C26000711CD75A1E1F66EFB006C42FC2143F368A
+:10C27000F07908928D150FE471792BDAB51003D996
+:10C28000B5403C7CAD7CA7423490FF5B6EE67EF00F
+:10C2900039819FFF7847B18FEF24717FF8FD241E0D
+:10C2A0008738877E20F47BEE268BBB5640B7D54877
+:10C2B000EB64E3308B1BFD19A335C42366207A8D14
+:10C2C000DFB5CA33E06B0A6B31213DC7E5DCBF093E
+:10C2D000E773B827B3895DA9DA89FB08934933303E
+:10C2E000B6DFF4E57B188F94A1AD086B85C93927BB
+:10C2F0007A63FBB508C3FC0F0735BC877196C3F1A1
+:10C300004686FB02F2DB16B2FFA611DEDE14A7ECB6
+:10C31000C258DD008CC7EC598C7CB4372632CD0670
+:10C32000EDA71ABBD845AE7F469EC7F196097CFFA4
+:10C330006691371BE973235B643B6EA5AD85AD57F2
+:10C34000227F8E7F8CECB8CA0730A6F211F08F21C5
+:10C350008C33560EE15307035E09FE2169DE8455D6
+:10C36000BD70D344EA8F742E4FF019713FC527304A
+:10C37000DF7AC0C31D393EA303E9E5600DE3817F89
+:10C380003DFB9880DF4111C0EFDEE54918857860FC
+:10C3900069120B87FAF14689E05E052C4254F60DCE
+:10C3A000308E7568A8407430582513CEDB59200CA8
+:10C3B000C47DD1F285D736CEA08DBF99B06A18C0A2
+:10C3C00006035FCF3EC4D7B393E523A3C84F1AC675
+:10C3D00004E4C3AA880613ADA3415E70FC03A01B4E
+:10C3E0002DFE261BBD7C7C6530BE5C948B24E2E375
+:10C3F0007BAA05F227ABCC1DC735A293D57D399B0F
+:10C4000084EDE7C0BF90AFE7346E4FC6EFAD103894
+:10C410001FCC51F9EC55BD5C0E4E66C4A79DF1755D
+:10C4200096D27F56B2819FE36AFD5E03D9DD398DD6
+:10C43000EF1FC2756567FD57589887F0F2B685E221
+:10C440000782C19744744144021D26A33F092EE28E
+:10C45000C064EE27AAFC598AFE4722963C2E620051
+:10C46000E589F6B0ACFE7933222DF0FC11383E742C
+:10C470000E68F686C0E79AB88AA8D33B14F714CCA6
+:10C48000BE19381EE1E6203BEAE3C9E6065A9707E3
+:10C49000B633D5733FCBB494FB59B4AF06B0650542
+:10C4A000F73327F7F2F567A4E76CF9423C6BF58B9D
+:10C4B0004BF9A7E179B9CE2FB6601C01E35EABB9A9
+:10C4C0003F6854FCD792157A7F61F2228DBF48DD18
+:10C4D000FA2A70BCA6478229EE62417F42E307FC3C
+:10C4E000DD5028A31E96138C74FED2C402FD0927CA
+:10C4F000E3F14CFEDCA8F88923934DBA7D3779042B
+:10C500004B433C14A31E4A4455E35C8AF1BC0B2CFC
+:10C51000B41EE366A3C44728FE575CCBCFA505C66F
+:10C52000FF2E54BFF72CB6C77A7C3EBFCB4F71B8F5
+:10C53000BF09CB52A77033C87797C3975C281FA059
+:10C54000A84C28EF41FBBF41583084332107BFEF8F
+:10C550007916FB97CD561BEAADA783C3A89F050BA1
+:10C56000048A0F2FB27179FBEACBD0F5A8A7D47853
+:10C57000EF92E199ABF1DCD26F92774FB0F646F5CE
+:10C58000C0E8DC1218C64F1C309FA2CB203704BF76
+:10C5900037C1110E7CFE9E6F8A15F0B46AE37B13DF
+:10C5A0008CC08FE77EEF7B0EE11736EEE7F0EF7C75
+:10C5B000714108271F986004393A57ABF6776082BB
+:10C5C00003F7DDFFC0E13AA897012E46FD86F31E72
+:10C5D00022D0BA7F23DAA5E8B6784FB1E11D5E8E8E
+:10C5E000601EB49F576BF7A764E746B4D762E8B103
+:10C5F00050F42FB6A63A08DE92E87C2C19FDA083F1
+:10C60000EE6ED118C732B016A40BD8314747FBD213
+:10C610001B93B8FC6E4EE1FDA9F8827E9E4E8EBE45
+:10C62000FE7E6E69DF8FFBDF194F9754E8275BD7DB
+:10C63000CF4BFF4E3FE501FDA87E1B38C012EAA993
+:10C64000D3698E77719E737EE318B115F5CF7E9115
+:10C65000F8F4FBEAED2968F7BF7FD51289F66FCEB3
+:10C66000EB3BE34A318EA0F845A79B3E334BF07E6F
+:10C67000A55F640ED0D3557E81CACAAD4DE6FC7469
+:10C680003C57DB64CED38CAB5C192770BA7182C681
+:10C690008FD997ACC69F57D278E7BC7ED288F49CDE
+:10C6A0006368388EE78FD9101EF70A9CDF16E5BD48
+:10C6B000C378DEA08338C047C9DCEF88E9E7D88FAC
+:10C6C000F3DB8CFA1CF9C5C0CF8704B6EF9EC2FB22
+:10C6D0002BEEC2F57CF6417BE9015AF76518442838
+:10C6E000071DAA3697C0F30389230E25771887F410
+:10C6F000F13864238F431647B4CC0363C622522E0D
+:10C700003C81F276FBD3AA7C80E8817E29B0A870B8
+:10C71000D0C491C3789C0BE14B1B0D4FE239C2E6AC
+:10C720002E2DBF3A80F66159285B0F7276EFE0D06C
+:10C73000B82D308EE972B800B6930DB784A64C833D
+:10C740007627128647A4F0F327E41F9E48709EC503
+:10C75000F179E3830DE08C309799C7B35C1F88149F
+:10C76000CF726504BBDC1DE0EBB482CF8814EE9F72
+:10C77000351B609C03711CFC7C2FFCC56DC178D3FC
+:10C78000C23E02F29DFAFD5B1387774DC96EFBFE38
+:10C79000AD89CE9F92A3B5EDC319B6BFD671FC5338
+:10C7A000B1A75D5338BD9CC380BF347A7FC2C860D7
+:10C7B0001D5C34269239B4F1CDA2581D3CA93851E4
+:10C7C000D7FE9E19FD74F5632D2D59D5D7E1EF8B5A
+:10C7D0006169E1B4FECFE6EB90AF1A2F7D3A19FD07
+:10C7E000D80DA25D8079CD7A7BE3A743A97789E252
+:10C7F0005CA79A45B247E0DE9AB5FB2767590B9DC7
+:10C800003B36765D44F66F4E0C3FDF3DCBADDFFF30
+:10C8100050E3F21DED9BA03D2BC773311DED9BB482
+:10C82000C5E37F76FF243345590F0F6403F97AF887
+:10C83000CC5E9829CBDBD144F4AADB27DA9155EB07
+:10C840007A0B4C8071DEBAD5E20E82719FDD79C41D
+:10C850002C69F64FAAFC600022F1BD23663C4F759F
+:10C860002099EBEDCAC6F366867CD1783FC9754B3B
+:10C87000932B2A1AED17F8ABDBB290BF1AB2D0FE99
+:10C88000351B6C4EDC0F9BB37434C599C3FD93A963
+:10C890002CAF1F4DFD56F827125CE90F26F823B187
+:10C8A00065EBC7D8CFD3E136B4E71546F955A44BAD
+:10C8B00085149C89FB55955B3FBEF86BB4A3367E0F
+:10C8C000AF63ACF84916D68FED6333D475C5F10666
+:10C8D000513F2D23BEC842BB5480EB02785EBE257B
+:10C8E000D785723FBC2ED486722FE279B20EF874CF
+:10C8F0006A0AD72F262F1FEF287F21F5D7BABE4F00
+:10C9000049A0F9ABB0297A8311F5873A0F13187C47
+:10C910002C6FF3F7A3B26A6BA111CFC57F90F67CA1
+:10C9200014E209DA876099347228E999EFAB078736
+:10C93000B30EF4965A5A143D3C19F530F45794E668
+:10C94000F835CAE5B847BC462BEAD110AB0DF73F26
+:10C95000C6E50C904A35F311DFB91B5712E0ABF86E
+:10C960004CE8074C8652ABB7A776625FE41483E2CB
+:10C9700017D5F2739DAA7E5FF504C375D8147E5651
+:10C98000AB55AE2A94F6EAFB2D02F707E46D3CAEF8
+:10C990005F91E67A12C7DB329C4DDA42FAB425AEDB
+:10C9A00030F4971B7F98B185E81C66930CB8AFA054
+:10C9B000D6AF6E9D0797EFABCD63B1D2FE23912D1D
+:10C9C00040BEF8E8965B5A1CD06FD3C39999A2C6B3
+:10C9D0004EBD94C2CF35339BEF32E98B5DC112EA75
+:10C9E00081B1B8F790D5E6F7E379488C6B54EDB296
+:10C9F000ACC7F3605561B0CE87EF8FE9E77A09F1F4
+:10CA0000D1B43BF722DEA371E0C20CE4DCD138F8EC
+:10CA1000229EB3775841DBD8D10F72BC4CFABF933A
+:10CA2000F15E4D9F258D9C1385FEC4F73024B4B76D
+:10CA300060F7B30E72D889F8722DE5F2E752E47010
+:10CA40009AC2BF258A1C4E3372399CBA2ADC86F101
+:10CA5000CE924784FE785E8E49A176540126E4CBBF
+:10CA60004CE44FCE97E5FEAE8A3CC72BFD70FE0F1F
+:10CA700094CF4A7F24B553E5F4E534D7216EE75AC5
+:10CA8000B216C0B86E03B946BDE75AD8230BE5A469
+:10CA90008D4FCC36E427E09398520D1FD435FD68B6
+:10CAA000443E310D13884F2C50E669F8C8D9EA9FEF
+:10CAB000D8F2BBA15FB528DEB09CB5D57F95A2FAB0
+:10CAC00029D7C6EF1F28ED4B42C08FA0F84F18C3DF
+:10CAD000F8DA852889E2A47397C1200105734D9E79
+:10CAE000648CC3CCBD3F88E260A507AB97844AED58
+:10CAF000E975B73F83F69727FA93A83C90E83A8DFB
+:10CB0000F898E6BF53C163C635EDCF653B78DCCD01
+:10CB1000E4B6D8D7C563DCCD25D27E5C6F667B9248
+:10CB2000EC94BA1FC7E36E18CFC3F85EE0FE1AC6D6
+:10CB3000E1703D6D8932E8F609DBC5E386EBF7D39A
+:10CB4000CA9B3E196480FA53F10E8ACB79FBB88CEC
+:10CB5000A9308FD913DCAF9BB4FB6C0A1E1B8C9ED3
+:10CB600064B4A30DD51C3F0D2BC402DA6F622CB840
+:10CB700050735EF76A7C3CDB9F48F851ED8BAAB797
+:10CB8000B7D7D0A1CF56FD7D35BB53A1F07B05F2C1
+:10CB9000BBBDBD9D51F935909F55FD6C8A3E487ACD
+:10CBA000E8367805FD07555F17E40D1D86767EE8AB
+:10CBB0004B895BFF0CF38F4C7365A502FFDCF24AD7
+:10CBC000EFAC3500DF66741B6D21D7A20F7F349167
+:10CBD0003E7CA490913E8452AB0F4D9DF8E1B9A9E3
+:10CBE000D7A7CF5395F6E0C772FF10F4B5B6BF8A4A
+:10CBF000B4116370FC85A9DC4EFE52E3EE4C8F1736
+:10CC0000A6AAF2796D7AFC66A5FDD5F4F88C54AE2F
+:10CC1000C703F5366863D2DBE7DEEE4B71B2C30CB7
+:10CC2000F43CDAB3C6606963BCE69C7B9770B75688
+:10CC3000AFC7F49B3E03F9FD1AF4FA7D88BF7F5716
+:10CC4000AFE7176E26BF0AFE9CE36F86F5C76F61DC
+:10CC50007D87F047B0BE8B6F2F0F817210C8F7B081
+:10CC60001ED9FA318CAFF9A93E1477003920BEAF36
+:10CC700000BE473950E5A572EB8070DC37607F114C
+:10CC800019EAFF403928C87BC588712AD4E388AFE8
+:10CC90003D20F3A86702ED843FD5B50AE7AFCA830C
+:10CCA0002A0757E7A39D265C979ACACF733D0FA525
+:10CCB00056CF77E6CFFCE13AF9FFD1D46BF3035EB0
+:10CCC0004DE5F7207E41FE7935F5DAFC82D752FF3B
+:10CCD00023BFE02DE21FD49FB87EBBFD437BF87CD1
+:10CCE000CE3F742E11F8210BE3CECD837ADB314E8B
+:10CCF00073FB15EED7834E27BF3ED0AF9EACE8BF87
+:10CD0000A94A9CE0409AB32595CB2BF9EDC3138338
+:10CD100007A0BDBA567F6F725435C338D35428B5B7
+:10CD20007AC28274EBC05FFF6BEAF5D9EF3DD7485A
+:10CD3000DFE3A9FFB19FE7BB167D90E4B04E447CD2
+:10CD40007EEF3132C4D3D5D603A6D51CCF2ABCD8AA
+:10CD50006354ED6624DA4DE08FF3FF097F8CCD6BD1
+:10CD6000B86805BA86A7198B301E78279EB5A078BB
+:10CD70008669952309F50D53F70528DEF191A8C2C0
+:10CD8000E68323611CB73FC9DAF60DA07ED4B0F06C
+:10CD9000D6F888C0DADA87A5890757D0B8F97915A7
+:10CDA000E6F21AF93E990267011CAA817302E0B506
+:10CDB000BC7D98D1CB6CDA7E14FD33CEC6F705DA94
+:10CDC000F6F37CF95DD1FFDB2AD8707FE19E61E745
+:10CDD000CC18CF199BE7DD1B0BEDE2D3428B42C091
+:10CDE000C4DFB355A0F10ED814B54A4EA2235B0E92
+:10CDF0003C6F589EC3F74D2C0D4DF98E0EF87040C8
+:10CE00009ADE4EE19FB11BC5C7E8CFD22030731622
+:10CE1000EF2721FEDADE47FAD1FB09F4BEC712750F
+:10CE2000EDEFDF358C39DC1DF0D12D698A3EC4B8B9
+:10CE3000B0DA3FD0646283E0E8286E73ABD2BEC53F
+:10CE400060A86080A7F19BD25661DC6B14E37C5133
+:10CE5000B829B548E6FCC71C01F3FDB9F166A7E99E
+:10CE6000D767F827E9DFF7FC1CBE86B6C39742FFF9
+:10CE7000323D9F841B9DEF7E0FE3088F126CE8A765
+:10CE8000563A8356B070A4BBC2D7F2C022C73098BE
+:10CE90005F10D3C5F15AF95ACE2C42BEAE646AFB7C
+:10CEA000EC55487FA7A1B53DE7F346A1F5FD342336
+:10CEB000C34FD0FB733665ADC23839D083EA09362B
+:10CEC000FE0C9F3704C0C302E4827198E412F5326D
+:10CED000E027B983FDDBA50A7ECF0AFC7C53CB0893
+:10CEE000EECFB524F0F2C534EEBF3DAEE0F169A55A
+:10CEF0006CE9A2C143AF363AC39F07D7039A7913AF
+:10CF00009EEE8E52E62D4F2C1A03F36A8960FD05C2
+:10CF1000E093759BC6AF5AA4E193E7374D2C423C92
+:10CF2000B4F627171E443CDEADE0E9C54D130E22D2
+:10CF30001FE1911394B78A1CBEFF6AD9FA7187F278
+:10CF400036B73DFFC8985FA1821809DF131CA62CD5
+:10CF5000DE4F4207F859D0FE7D47C0FBCC14753D2B
+:10CF6000EF2BF4191340BF8200FA8D0C808BF57003
+:10CF70009B1F0C3D83FF54B263E5E26E183FDB2438
+:10CF8000D01D2BD0CF66019E37A6DD5B14D203F9EE
+:10CF90005432C5425B4FDAD483D6BE208FA8BF4837
+:10CFA000FFBA485F4F443927785A91E346E49BEA39
+:10CFB000C531D07E6F5AC92ABCF77ACFA2952644D4
+:10CFC000FA0769335619A1DFBBB3FEB417FB330A66
+:10CFD000A507C7083FC3A7F501F3581B00CB01ED18
+:10CFE000575D459F2F0A78FF9180FA1501F0EA00FE
+:10CFF00078A9FEFD6933F8FEE534A01F22EE6AF23F
+:10D00000E24D6B5D37B4DA2F01EDD9877A7EBFBD73
+:10D010008EC327373D50B4344403A7FDAA48CBBF85
+:10D0200026C55E4C8E723A3AE2DF439DF14F5AA01C
+:10D030005D9375E7120F33A6B3BF7B443DDC24AA92
+:10D04000F2B5F0E0BC74CD7EA05C5B84F194CEF7C9
+:10D050002BE422DCAFB8FD71B57D4D9143333FB574
+:10D060007DFEBFAE88F8BD2B6935451B68FF4FD9E3
+:10D07000BF8BE0E52D97AF84215DF2F1FC28D677D8
+:10D08000F124CF4DD7CC8F35A4E0FC9A1EE6F70DE6
+:10D09000E53AA007C87909B3D3FE775378F8821729
+:10D0A000A0FD9E87C50568BF0E2F88A4F346E3FB4D
+:10D0B000727F7B4F789F6EF701DC143CD58C71D565
+:10D0C000A6474751F98EE858E203E4F7EAFB5851C6
+:10D0D000485FAC0F27BCC4BCB4ACA816E420B6AF04
+:10D0E00044EFBB226CDD76A01FBADCC470FF89312F
+:10D0F000FB73C427BFB3909F3AADB61FEDF794FC06
+:10D10000BE30BF07B42B596CA2F83FFCD17D0CD7C1
+:10D11000F25166AC9FB14829E55BA9DCFDD31B1F2A
+:10D1200066D0BE8E48E77676F9238E8324B3AFE5CA
+:10D13000FE745FE1A8925F656B5F576A5F18C7D79F
+:10D140006792285F0AB3496113D06FBBC191D6378C
+:10D15000BAADDDEE9F44DAAF7AEB4C4937DCDF1B2A
+:10D16000D897F3CB2E7F49B7128D5D2F3D6B243CB2
+:10D17000EF364BF3506FECEED25B90496E1B2231D1
+:10D18000CE3A43F19B814F16BCD1011FF6E92B1219
+:10D190005E8E5916E05958D6F4DBE861382EF5BD9D
+:10D1A000EC83AE3ACC1763EA250DD4FAC7B9C9238C
+:10D1B0006EC6F1B6F1D706D2E7E41F033CBAEFBA68
+:10D1C0005532D80FB607FC7A1C4794231FF9493D06
+:10D1D0008FC7621A52B47185363F74A122FFBCDD3D
+:10D1E00057783818BEFFD5AB4174EEEB2BF98B5056
+:10D1F000AD7FACCAC7CCB0FF39DC42EBE2704988E6
+:10D2000003BE31D61C7F08DE2B7DD6447AB3F4D919
+:10D21000E8477C580FF4C42DC3C0EF3EDF979F074B
+:10D22000E85C3EB6148DECA5958FCD4538DFCEE495
+:10D23000637ADFCD9DC8474D37E4A3FC674D74BECC
+:10D24000BAB84BF59D18472C36DCC8EA607C239EA3
+:10D25000FD5537DC6799F9AC85E8EA0D0D3DCEE761
+:10D26000D5271EE7D56A7FFA727DE5ADCD257B21F6
+:10D270001AC03B03FD2D2E31D17A44EC6626BD2722
+:10D2800086D9797D1716BF10ECF2E2D01C09E9EBC4
+:10D2900056E401EA25E4B3BCF049B7E1B996C30B03
+:10D2A00012691FEC6416DF079BF5D0F361E87F7EFF
+:10D2B000358F9FEF9E8DF976709DFB6FEE7B552924
+:10D2C000F976FEB7F6BD9EE8ABDC1B6ADDF7E2E758
+:10D2D00040F72CC8CCE278619205F1143780F072E7
+:10D2E000AB95494180173182A5A0FE51F7BDC45FBF
+:10D2F00073FD241A045AA71FAB91297F415E9895AC
+:10D300003FFF35BFB7273E55C8681F2CAA9AF6C104
+:10D310004211AF18BF159813E5E768903DEEFE7413
+:10D32000E4BF20A2E7CCE7667DFA872CA4DBD828EF
+:10D330005D3C41E13FF5FD13B537D1F84E08CC8691
+:10D34000F63EEF8FA923913E4DA2EBA9BB496F0694
+:10D35000D3FE39B3797F3718E099B5B0CE66C837B8
+:10D360003DE212D2DBFA99B9F0E114A477DE1F8313
+:10D370003C78FE66C6A2A0D5780EA3BC91DFF39ED2
+:10D38000B6EC7B3A8FCBE28DD518E7FC7A51103F93
+:10D39000A7BE7530F1CF34033FE7C2E2CC145F2A59
+:10D3A0000F51E05E39046BEE2F99911EEAFD9BBD93
+:10D3B000A857E0FBC7557CA0DF887A573D47CFAA26
+:10D3C0002594FF6283D0E139AFBFF5E5FEE9B438BB
+:10D3D0003B9D17AD78CC625F18CFE92C0EC2EF32BF
+:10D3E0005A1755187CF9ABB15F0393B6D970FDD0CD
+:10D3F000528AEB6DB63595F210541999D11C01CFB4
+:10D4000025AECFD4F1544985B7123F19D921630411
+:10D41000E2B1E5D316E48F85A112C6452ABADA5DDA
+:10D42000D46FA8D5C6ED84F25D1C7B22F281DF1C8F
+:10D43000817CF0A960B0F0FC030E03D49F63BCBEF6
+:10D44000F53B8B96A5D3BCAD36C3881EC877E7F3F2
+:10D4500057C37BB73229A107DE135B1679E724ACEB
+:10D460007F4D24BD04C2F4580EFA7BAF8999B84EA3
+:10D470009DB66C0FCD6FCEE6017883804D7BFD00AD
+:10D48000D9A7390A7F7995736B25006F463C2A7AB4
+:10D49000C125B26A8A8729786CC5AF525FB1CC4486
+:10D4A000F4A8586C213A57D4FE8DFAAD086DE98680
+:10D4B000F4A8D866A2FC1DD61BF83C4A6A7B0F3B39
+:10D4C00004E32E3185DB0478542E8F35235C5E2FE8
+:10D4D00010AC7EAF62D95FBB19D2797F585A0C7CF1
+:10D4E0009FB5ADDFE838B467A75F8D8C9BA6A1FB25
+:10D4F000E945DBC370DFF968902719CFF9FAEE0F21
+:10D50000B2E3B942359E767A5132BF0F646B09C5DA
+:10D51000FDEA19F31223D0CE1DB679CC587FB8217D
+:10D520001E8FCC3187CD360C6187F146824F2BE7B9
+:10D5300048E80FF3070A9C6FCA5FDD634E80EFF582
+:10D54000BF81E3E7EC6B47F70E417C001FD950FF2A
+:10D55000C4B5A4A01DAE30B4A4C4227D5E16C85FBD
+:10D5600080F5A903F38F54225F0D047DA8F055E5E3
+:10D57000D6EDF3513E2BDE3C998F783D3B969931A9
+:10D580003E56A1CC1FD68FEF1AA17DC59675F98C9A
+:10D59000BFFF2EF29D6AEF015E6402B8D9CCE18C28
+:10D5A0001BB87E6E367B29EF5DF39D8CD1FE999181
+:10D5B0008DC47640797E0F401495FB69D531137880
+:10D5C000DE3D597B7EAE12EBD3DBEA3BE39BF137CA
+:10D5D00018143A5BC82E8D47BC00EC5DB62D0CF9D3
+:10D5E000E2EC6B7BF60E41B9D822D898561E54391E
+:10D5F0008CF3F17AC0DF1388BF2DE7F3310FC5EC50
+:10D6000033A112D250C5932A6F2A5EAA18C7838A03
+:10D61000972AA38227A5DEA9E0A19CF9A83F76A6B8
+:10D62000BFB411FB7FF347DA6F3B3B8D09FC9C30A5
+:10D63000CF8BA6CECF15A1DFDFAFBD81F3FD146583
+:10D640009EE5366E17CBA398543B80F8CC6156F319
+:10D650004B4293B39B8FE8C6BF5A9183567AE33C03
+:10D66000609C5E03BF2718A8BFE6297C75A476B22C
+:10D6700007F5CA6C19FAC94279B04DC17D4EF6BAA8
+:10D68000A8E86FB0999AEFE6BD7284F81074971409
+:10D69000016B16D3261807FA5F677A53BC30AFBB0D
+:10D6A00097E6BD718C8D19409F1C11BCA13BD01E0B
+:10D6B0003C24929E52C7E9903F247A381AB87C22C3
+:10D6C000BF607CB0552F048CB75619AFC560F7E228
+:10D6D000B960B650A0FB6BE2C2B3A187B8BDA34846
+:10D6E000625BFF37BD8BFB918E8B61924035762359
+:10D6F000B6ABBC189680F6FB88127738B2787B58A8
+:10D7000089860E4F75F69D258325A47F5EC8A18767
+:10D71000518E1E53DA359BED2317A03EB81426E137
+:10D7200079A9E608391DFDA866035BCA22381F1ACD
+:10D73000BBB5E10FE485F007F5D293B636B954C70F
+:10D740000D74F320DDA0BD83CB919DF6312AA3F8A3
+:10D75000BEE8D5E529D34BFAA95690D667B5B5539F
+:10D76000EFE53DAACC9B64A45B9B3D40FE447B67F8
+:10D7700051F21805E641BDB557D738C45F5588D575
+:10D78000804BB8C0FA40B86D3D556D443F9F2D8A1F
+:10D79000D9ABBD97763448A6FB67BE1E225B0FF45B
+:10D7A000A8BDFF7D7E9EB791DFDB52ED34FCAD68F6
+:10D7B000E53F78AF2CEB7C3EEAD717732D74AFA909
+:10D7C0006BBF04FACE29D6601E8EF6FFDB96FC30C6
+:10D7D000A96D7D72D3458F184EFE42BC6E7D507E82
+:10D7E000E65D92E70AD642F7B1A72D3B307630D2FC
+:10D7F000FB25139D1F98511F4F76EEE486E999385B
+:10D80000DF698B93099EB5F13E0E2FE3F90FA72D2B
+:10D81000CE7E01FDAFA3418E7CE467DF4AC186EB7B
+:10D82000ABA11BB31FB907EA8786F6E98AE3FE6A54
+:10D83000C3D1B148F7AF1688A49F1C1B9EBC13EB45
+:10D840001D3B44BC3106EB19DB2398D79419C36DFB
+:10D85000E817A8E70BEB4C5CDF9E51F4C231454F53
+:10D860001C53F82FAFAE2E05FD25DF3AB047B8EFB9
+:10D870006DF695D2F96EC1665F0FFCF2AD2013CC48
+:10D880006CB684DA5CBCCFB296F2E39C4BB6D8D0CF
+:10D890004FBED7C2ECE8D7DEBBBBF7405C2A38945A
+:10D8A00075D5D848FE5D155FEAF74F2BDF65E28A34
+:10D8B00052DA7788941250BF352BE7C68F2AE33DA2
+:10D8C000B9E8A53BD12F38B929398269F07E52C910
+:10D8D000D3340BF4E0960ED67BFE1BD4B8839BBEEC
+:10D8E00053A6C403F799EA7B61DECFC0FB5D27D660
+:10D8F0000559313F6FE03DAF13266E3FDADDF7DAB1
+:10D90000A18703F3DC068EA7753D1378FFBF5F4840
+:10D91000877EBC2A6781EFB7BB4F9E746DE7AB3043
+:10D920002F19DEF7DE7303A3F74606FFEB0DD4D7FE
+:10D93000A5F5161BDEBF3F1624D17A48CE66D24627
+:10D94000B43356291CD7F3C7F665D2F9BFD22F19C5
+:10D95000C955E956D18DA98ADF5D99FAF83080EF73
+:10D96000DB6AB2E3FB2757ADBC938B993ECF420EE7
+:10D97000E3F23913D6491E5BDBBA2870BD347BF560
+:10D9800066BA47F84BAD97D4385220BE73FBE9F323
+:10D990002D04DE9FDB0D6C9333B03DBECFD4B86851
+:10D9A0005DF45D4D1995B90DEBF26225BC4F71E444
+:10D9B000B1A12837A1E1140F3953534D9B78DFED06
+:10D9C000C8BC8CF743DF0A09B7A1BEF8AE66817206
+:10D9D000B940E113852F6FDADA24C6326ADF3814D2
+:10D9E000DAEF0A09A7BB2E498E9C70B4F32A5D03B7
+:10D9F000EF37ABF33BF510A7AB3ADE539BA687A1FD
+:10DA0000DFD9B426B23117FA9383C36DE86FCF54D0
+:10DA1000CEBF1C5FCDF5CDB7D6F017C6E0F999B5EE
+:10DA200013BBE1BAEE3E93CF6C877EED6F1786E1B4
+:10DA30007AFF1BA3370CEF1B7F03ED3D68278C6E2D
+:10DA400011F5DC900246FB78433C4626C5D3963957
+:10DA5000F145EE19A31BE97ADA7371CF15E4A3330C
+:10DA6000068A770166F65C81F6F6D03E1427BC6F15
+:10DA7000275F6FB27F75E1F501F7169FE8C7F5D212
+:10DA800089B56F8CA3F5F906930DC7F9DD86BF76CE
+:10DA9000C37338B3193F5FFFED2681E6311BF831C0
+:10DAA000281EF5038F83CE06BD6F15DAF361DEA65F
+:10DAB0005AE2C3D9C08716F4D31C3C1FF36CCCC701
+:10DAC0002CB176F93FBA2A7C3707F80EEFEFFED279
+:10DAD000793F96F70B3CB7CAF950A5BB8A1795FE5C
+:10DAE0006D7CC874F905231A060C8F656DFA40BD6C
+:10DAF000DFC18CDE15784F63BE185A8FF9AAF61B6A
+:10DB0000ABFF48795B6423DB48F69CA561BEBCF99A
+:10DB1000E20D768C07D699AB5BF3BA607D605E1739
+:10DB20003184BF5F88F98961BE21E9F1F4BD09360E
+:10DB3000FB2844B729CA4B710131CFE0A07B79752E
+:10DB4000165A3707EAA15714FADE86BE03FA3DFDDE
+:10DB5000F8796DF5DE9F5A82A1E98DFC5E181C7183
+:10DB60004982263B5EF9FC0EDCA72D1C1AF1AB4462
+:10DB7000F87E53BF2377E0BD8DC2CC886D0900EFDE
+:10DB800079E5EFBCFEC6886C13FA01C2D7778C44E6
+:10DB9000BFB19FE3CD7E9AEFA8FDC2F39DF8FCF3E1
+:10DBA00038D7DBFDF8BE6929D2FB9C10C6F3BD2532
+:10DBB000F9280EAABEF7B1C00EBF25B4C15E138B03
+:10DBC000C3BC06CDFDB83EEDAC8C4A77ECE5DFD7A3
+:10DBD0003F470A7D8FEB4C65FFC76095CCE8FF3966
+:10DBE000ED663BCFAFC89C56F0ABC62BFC5B62BD6D
+:10DBF0003C92EC6F35B35B3081C952FD7DACBE6D9C
+:10DC0000F7F6D65ECFBD3D26F33C7C754A1EBECEF0
+:10DC1000EE510A8DEFFF88FE65E0FDA9CCBFB4BCD4
+:10DC2000897C320EF80AED45560B87C72B7C52B122
+:10DC30007D2CE57B9EFBB1C98D7EC22CC51F4B722E
+:10DC4000756112B4BB04F28B7AE1CC384F0AEA8FCB
+:10DC50001335AC3E09145681D5E543BA34C7BF4FDE
+:10DC600079D14EACAD0B43BFE72CAC27C64017E5CE
+:10DC70008A7FCF2E8B9E5BD00F8EEFBB7EB986DF67
+:10DC80007EECC7EDFF99784F1CAE6FE4780BCFD7D1
+:10DC900078790FE5792E48189D8D71A4FD353BD814
+:10DCA000D1E4B6F73ABB8F32C43082A56BF625C7F4
+:10DCB000193B3EA7F1AD9A4F7303B7DF16633DE5FD
+:10DCC000D1025256D712ECA4B8520CF228C687A53E
+:10DCD00007085E328BD9E81E6BDB3E1DDD0755E978
+:10DCE000EFB05F1989EDC601FD51DF18AC3E23C2CC
+:10DCF000CE027E3EA52F100EF5894AFF51E2238FFA
+:10DD0000211DE62AF7B8E60AD51C3659E99C6BA016
+:10DD10007EC4B86631E94D796F2EFA63A02729AF2A
+:10DD200082A21725F81FE545CA5967A66657CF8B0B
+:10DD3000B437F73FD08F19E9FA3CE22A9D54FFAA85
+:10DD4000333AA97A12E835E87AE8A5E6299BFB2C54
+:10DD50008F77CE7D767ACC40C21B481CFA43317F48
+:10DD6000A2B8CA4C650E6C6D24F1B1698453427D32
+:10DD70003B76472C93E0D1AC1D029D6F1DB32392DF
+:10DD8000E0307F0F9E5749B1F7635FEC3E02E393AB
+:10DD9000275FF8621EE6BD1FF35B46F16343700820
+:10DDA000E59B104728791CC490F7F01EEB05C95875
+:10DDB0008DF6CAC9DAE50F3010FD9BF9395958E5DF
+:10DDC000C99C4EFCDEDFDC7DDCCECF1DCEF7052FFF
+:10DDD000E01BD0FE429148799A9E0ECE20FFADEE18
+:10DDE0000E13DD8F60B2E3135C574D52F8C112037E
+:10DDF0000B4B0DBD822490570D7D1E0D7AEC3D1707
+:10DE0000F4EF857597D013FCD8B4085DBD510EFAB8
+:10DE100006F3C79A62449B1BC61F6AEFA9EBCF2982
+:10DE2000969B309EC25CDC8F56F98B89678C746F31
+:10DE30007E18CF5F71C724FD3D49D3B0F323C9DEFF
+:10DE40000CD3FBDFCEABE46D5AA0F2535FD657C9BB
+:10DE50004B4FF6FFC2417E3F4462CED5AABCA0FE26
+:10DE600007EFE669C4CF9DCD26E696087FAF61FD3A
+:10DE700005D962C37840AB1F9E04EF45A191B4124F
+:10DE80009F635E50ED3C312FA8162F9817540B63FB
+:10DE90005E506D7BCC0BAAADC7BCA0DA7ACC0BAAC6
+:10DEA00085312FA8B63DE605D5C2981754DB1EF381
+:10DEB000826A61CC0BAA6D8F7941B5F59817545BD6
+:10DEC0008F7941B530E605D5B6C7BCA0DA7ACC0B60
+:10DED000AAADC7BCA05A18F3826ADB635E506D3DE1
+:10DEE000E605D5D6635E502D8C7941B5ED312FA86E
+:10DEF00016C6BCA0DAF69817540B635E506D7BCC47
+:10DF00000BAAADC73CA0DA7ACCFBA98531EFA7B646
+:10DF10007D0B5B948C766C67BCAB393D1AF79DBE6C
+:10DF2000257E3E742FF033CA61F3441BE52FBCCE2F
+:10DF300075624BBAB26E51F8F7120B9982E7D03B7B
+:10DF40007B5FE5CF97F09D6CB2074B897F59683DA9
+:10DF5000FA738F1A1D741F4A6EE0F7139991FB0133
+:10DF6000F345C5FF51F242CC1725F2033077B0518B
+:10DF7000339EAE0E2B336AF0105960D3C1D1CE1848
+:10DF80005DFBEE93245D7D0F579AAE3EB6CCAE831B
+:10DF90007B57E7E8DAF759E0D0C1F17281AE7DE254
+:10DFA00052A70E4EAE9FA46B9FBADAA5ABEFEB2E35
+:10DFB000D3D5F7DB54AD83FB372CD0B5BF7187AC1D
+:10DFC000AB1FE059AAABCF6CAED7C1D92DAB75ED65
+:10DFD000071F72EBEA73BD9B74F543BF6DD0C13769
+:10DFE000F976E8DADFE2F7E8E0E16C9FAE7D9EF5D6
+:10DFF000631D3CCAF699AEFDAD314774F5A3A593F8
+:10E00000BAFAF2D3DCBF6775B03EC0386508CFAF4F
+:10E0100051E9610DE85FDC9E765ED7DE1405EB0505
+:10E02000E09F0AD087E8F7FDD0258EF231B3EA30C1
+:10E030003BDEFB964754FF517BCF7BACFD47DDF7C2
+:10E040009F0E0EF304D1FAC24AF6F6A6FEFCBE59A4
+:10E050006B3E11F53E3BF3B198280A09F9D03F1207
+:10E06000F01796000E73F0BCD0E00791FF6403BF79
+:10E0700008FDCDD67591213E1EED72709B5FDCEBE5
+:10E080008A26CFCBD5FCE2DBF1DBD994A7D7D11F11
+:10E09000CAD90D9BF3719D358BC94B703F51CDB3E0
+:10E0A000B83F481FDF52CBD156C0AFE67BFB82EAB8
+:10E0B0007B0DFC19791F6D3D43ED5BFB55E25F0263
+:10E0C0004C76AEA6FFC760FD6704B9AEAF01F90399
+:10E0D0007FE8891A1BC1AB6A62087EAA46A27275E4
+:10E0E0004D1A95CFD4D8A97E6D4D0EC1CFD5380825
+:10E0F00076D71450B9BEC649CF37D44C22F8851A0A
+:10E1000017959B6ACAA87CB9A69AEA5FAD5940F0F8
+:10E11000EB3532950D354BE9F9969A7A82B7D6AC44
+:10E1200026F8CD1A37953B6A3651F9E79A06AA6F59
+:10E1300004FF0DE15D351E823D35CD04BF53D34252
+:10E14000F0BB358708DE5BE3A5B2B9E65B2A3FA8E2
+:10E15000F151FD5F6AFC049F51F621E6F71774F751
+:10E16000F154D8C88E717F0FF356601E861CD3778A
+:10E170003F971F37900EA794FE4D23C05DC23872A3
+:10E18000CF94F5759A75455D7F1EB7AC35F0FC2DC3
+:10E19000B53D99AD8EFC7607E3E7B4B8DF3E13FFDB
+:10E1A00025C1D3A89ABDB8DE28ADE679CAB3911FC0
+:10E1B000D3881FFF725DEB34655DB025D1F904F2A1
+:10E1C000230B717F1A9FD5768FFE40A2EBF7F8FCE8
+:10E1D00042F57D7BB1F54C9B3D053F32D6E289C6C9
+:10E1E000FC5FBE7DA27DBDD4F9F7AA94FB0F9DD63E
+:10E1F000EF3AD90BED55C14F22C5F5F79B4227E108
+:10E200003EFF8B0A3E5EEC6FD0957725395FE88F35
+:10E21000FBFBC9D52F3C20B4DDDF1F8F4B7C90EF7B
+:10E220004226511E9C89CCF11EBAE077802388F0EB
+:10E230005D4CA6F24482EB4F389FBB610182B06B0C
+:10E240008825AEA3F9048E67A7329E9DCA38D47282
+:10E250006E927307F6772CD9A11BCF8B4A7EA171E2
+:10E26000CCF71C8EEB1F6F9F3F2E24B6E1BB359E73
+:10E27000C2AA294F4631E3F19447312F46545B5EE1
+:10E280000C75FD50BC8FFFCE11FDA1FD9C1F4FEB07
+:10E29000DBC0BC194B86EFE17930603D86F77F8BA0
+:10E2A000EFFF15E95FFC3D28BCB73BBFCB61CA332C
+:10E2B000E39D05BC1A4B793578DE1B17203096F2AA
+:10E2C0006A50BD7003FCBF078ECB9A66A4F175A19E
+:10E2D0007C274F07EFA7BC341853B074C5BCC7F1F7
+:10E2E00034CFFDCEF3DCEF8EF2D1FDD42D89AEAF6D
+:10E2F000FAF338F953991827427EC2EFD8DC747EBE
+:10E300000DF8C92C008A6646013F75E06FA87C5362
+:10E31000A9DCC3519F033F9E407C7FB773701AF204
+:10E320004DD5AE5C09F15D67E0F7E9E40F947D41FE
+:10E33000E5F710C4F0F47574EF009D71A46F6E28BA
+:10E34000DD3B6812D982CD1DE8576B06A7F3FE1896
+:10E350009E4FB22E607F52C8E07417947663DFD967
+:10E360004779C82A9B79BC9A6579D39D1D9CCBAA15
+:10E370005AF0DBA79234F3A8DA71849FE762DE7467
+:10E38000ED392E49E957E53FD11CEA5A17A21D5F26
+:10E39000AB1C5832B2490E8EE3BDEE711629FC2E2D
+:10E3A000817E1FEC3BCC2FE3FAA38DCE03AAE702BC
+:10E3B0006730279533C17222DF3BE595747F7E3647
+:10E3C0006BA0E79539D3E310AE62BE9131B83E5AE7
+:10E3D0005AFB1E868326D6AF1CD503E635C13DED1C
+:10E3E0003D2C0B3708C76589E42806BFEF15AA172F
+:10E3F000F784EFDDF3EAF0C518B71E27723AB00FC5
+:10E40000391D8A819FC588F6F303B9E993114D72CE
+:10E4100043E357E5A6782173E0F903F57E48AB1C8A
+:10E42000E5CCF97B2CEEE1803F89FC5AB5CB12415B
+:10E43000EB53CC3383FA4A919FC546EE5FCA98DA14
+:10E4400094F427F7374C0E259F17E3FEC81C99AFAD
+:10E45000C74E99B8BC9DFA2AD48DFC3DBFCBEB7159
+:10E46000241F26553E7E9A42E77B18F81F37B7F7E0
+:10E470003F5AF3CCF462E46FB03857CCC0C4367B5B
+:10E480007ECAE01E14C6F3F23B105F7B63F8FA7994
+:10E490000EE6A1C1FAAE4E09E3A5A7A2AD745F28AE
+:10E4A00030CF1963769A9F49991F8C6C12FAD31654
+:10E4B00025AE561730DF1F82E268BED270D6C0D0BC
+:10E4C000B130DAE4E928F70F703B31BFCB6F5CF86D
+:10E4D0007D6F10B30943693E148F950DCC59C7E386
+:10E4E000B334BF0546AB0DCFE52C99267A05B213A0
+:10E4F000304E8CE74559ED3CAFAA9A7F3B70BC0E7D
+:10E50000FDF8AC710CE7E710992F68281F2F8E4F8C
+:10E51000067A107D009EA6191FF4EBA6FC3FC1925F
+:10E520000DFDB0E67F3DC0E3CBB5DC7F84F16F220B
+:10E53000FAF480F1C75E7DFC26645118FFDC0CAE56
+:10E54000A7EA700751443BDB95F4EF8420E7FDC850
+:10E550008749AEE5BDE6625C23D762C7F81DBB5CA8
+:10E56000D70BF554089328AFD63807CFAB05DD2D70
+:10E57000427E28C4BC7536F203CE68F3B0B180F891
+:10E580001A9085E2AB1330BEC6EF12BD8BF1D9896C
+:10E59000CAF9E6BEEC4B157F145F13717C14AF769D
+:10E5A000D1382D4859288330CE437470D33C82999A
+:10E5B000478967B7907FB052E1C3218718D9892175
+:10E5C00021DC4EEC3AC2DC78EEABE9C73BF342A16A
+:10E5D0007ED77923E929C013E503FCF35FB95DD940
+:10E5E00075F2782CEE07D4FEB83716FDC45D269779
+:10E5F0005885EFE75A6C0BED6D718DC643213CAE2B
+:10E60000A3C4F96E52E6D9C85AEAAAA03EA787C8A1
+:10E61000300E987DD0138CF28C396A3BDA6F1C7601
+:10E62000D1ACFB5D0B934D0FE7300D1C8F21B280F9
+:10E63000DFFFBCCE75EE6B199DFCEEE799A86BFA77
+:10E64000DDCF2C651E8F6638DFCC20BB364154F001
+:10E650002E20BE400F3421BE9FA930D3EF1A34556F
+:10E66000987B7835E3AB9FF50FC2EFEE7FFD83EC2F
+:10E67000D6EE6C353F4E43103E37CBA114777BE688
+:10E68000B281E26E6BCABEA6F5497D0EA3DF11AB67
+:10E69000BF5C427EC0A502869B48ACF6E6FF53866F
+:10E6A000F0E33759E97B81E37F1BFC790F10EA2DFA
+:10E6B000F0E73DA9E0AF803F8F30DE67C5721BF801
+:10E6C000F358BAC19FC7F239F0E7B11DFAF3583ECB
+:10E6D00003FE3C96ABC19FC7F229F0E7B1DD2AF0FB
+:10E6E000E7B17C02FC797C0EE3CAA3711D62746FF2
+:10E6F0007F6170D832F433243994FC8D8F1C03BBB6
+:10E70000783576F6E68B061D9D879DD1FFBECD90B0
+:10E710006311BADF3FC9F9B2A7AE7ED0C1045D7DF7
+:10E72000BCACFF7D9B3E0B7EFEF76D62CB4604FCCE
+:10E730003ECE6D01BF9FA3FF7D9B68E73D01BFBF3C
+:10E74000A3FF7D9BC7957C992A1D53A4D782902F48
+:10E75000D6944D08671DF8176AF984420F157EF2AA
+:10E760002171524771E4F01BB9BD7FE72BCBBE0D81
+:10E7700080CFDD2CDC8971F7DD0E03E9A5675687B4
+:10E78000501CD6E21D7212F967B78349C83FCF5CAF
+:10E790001ED105C7331CC888CF63CBB87DEA79A3E7
+:10E7A00044FC1C5BE613F1BEE82D977D76E4C72799
+:10E7B000C3F8EF6C41BFEE85D0DF3B6307F5C5388A
+:10E7C000CE3321C0CF286F1E5F7012C0E1570C0CF2
+:10E7D000F523D84ACAF32FFF2144398F7A85EEC337
+:10E7E00085A34E07BDB4BB8C7F3FC57B3958EB0F6B
+:10E7F0003DFED3D5F0C288AF3AADBF6D76028EB77D
+:10E800000DEFA01AA14C6165EC31C44739979FFA0E
+:10E810003203C9D3259027C40FCC9AE8C25AF4F228
+:10E82000FE04CA87960EE509CB709ECFAC32D26E3D
+:10E83000D928F1D57D37C22B6B0E8AB4CD2ED97C69
+:10E84000C11DF977EAB8D738F8FC22ECCC80762ED7
+:10E8500002F0E9A6FD6C7BADF6F7ACFEA0C8E7EFD1
+:10E8600015F97C5AE1075C6F233C4A5C3B3A05C7CB
+:10E8700091C3F535D053C0FB58976630FA1DD1DFF0
+:10E88000172574E928CFF72A651CCF29F35A8BFD89
+:10E89000923C73B91F25160FC77ED63819E9F1359A
+:10E8A0008EAF6B316E77A988F7DBE711AF80F8ED9B
+:10E8B00055ED13B0FFDEF33C54BA9571F62C6BA105
+:10E8C0007AB53FC9EEE6FC5EFE356B86F9E2215B68
+:10E8D00091ECC519CA8FBAC668646887519F217CBC
+:10E8E000C96AC43312ACE7AC630CEF33D78718693D
+:10E8F0009F624DE5298257DA381C2657A7E3F98B2A
+:10E900009DCA7CC264996077C07C52A4A9E1DADF19
+:10E91000730D2CB72B78DEA6E063A7C965B800E3BA
+:10E9200018FC37917EBFA3B3F7543B9BF3A521405E
+:10E93000FF74D1C93FFEC69E62171EBA11D7CFB26F
+:10E9400093EC82BA6EDB3686DBD795C1533EC47535
+:10E950007F91C2474F078F7B0FEB0F8CE6BF83D3AE
+:10E9600034FAD6DE5A3DB94319F77605EFB9B2E36A
+:10E97000AB79D0BED069C191811973F4FE15F4E76B
+:10E980001C23DA3D40B783D9AA3C388351EEDE1907
+:10E99000339D1DC2FE0BF8BED3B68289F45C62CEF5
+:10E9A000DBFBC37B9FB418C99F81E73F2B8FFB150F
+:10E9B000FCFF4519C7070AFE9B153EDD8B76241523
+:10E9C000E32C6954BEA3D8118F6247762976A451EF
+:10E9D000B1233BD18EA4E2BC2651B94DB12359A33A
+:10E9E0009F243FE912E6C515D08E54B22530CE7C67
+:10E9F00018BFD8817D1B9F2306FC4E56B08E4EB7A4
+:10EA0000A745EAE0D1526CC0EF742506FC8E573F53
+:10EA10005D7D9E3533E077C086EADADFE21F11F0D4
+:10EA20003B627A3B32E4D804BD3FF3E53DBAFA419C
+:10EA3000074B74F532FE03E69B7D8CF1FCB2C1C33B
+:10EA40007E87FC927DDCA8FE3E33EDA3A9FE56A096
+:10EA5000FF93CD5AF7F10CB48F273309CF75D256F7
+:10EA60006582AE9EFCA78326672C9E3FAC2D04BE1C
+:10EA7000C37388074BC730DA8707FE0579CA769ECD
+:10EA8000F892F28D8AC599E4275D34EAF6D37203D1
+:10EA9000F6C59C23F5FB66D957D937FBFB8DCABE5B
+:10EAA000433B7F2CE29AFC31902711C7FD74F09410
+:10EAB0003D88B79D9F713BD5F4D983B1F8FC5D6C5F
+:10EAC0000AFD6CFFE641F2BBB6B7CA872B58EB6F65
+:10EAD0006DF3727BF1E6C1841DB8CEC88A16480F6B
+:10EAE000661D993B99F8F1A0817E9F33A5A02A1855
+:10EAF000F1B2EDD0C260FDFD298D7E204269F48324
+:10EB000088AC1CA1AF8FD2F06102278EB6FDFF0545
+:10EB10006B92E82C00800000000000001F8B0800B2
+:10EB200000000000000BED7D0B7814D5BDF8999D19
+:10EB30007D25BB81CD03DD401226E161541E9BF78C
+:10EB40002624611202460DB0101E414298243C5208
+:10EB5000AB3655ABD18FDE4C08841051A2B515AC45
+:10EB60008F958AEDEDE316AD045494E5E903840531
+:10EB70008346455D10D1DBD2BF28D0DA7EF4F37F27
+:10EB80007EBF7326D9193601FAB8ADBD37F9747254
+:10EB900066CE9C39E7F77E9D0321D790809DE0CF1C
+:10EBA000D722FC3FD3D02E2081F4F076A9A17D831B
+:10EBB000A1FF4C43FB2643FF3ADDF3ADA19983153A
+:10EBC00027FD1B7E265E78DDDC4C48E0AABE7E3940
+:10EBD000669FE8197361BFDC6E53DFB8F4BF1D1F79
+:10EBE0002C319D4B20A4AB5BF4DB52E9F5E812A27B
+:10EBF00066D371BA4D7E22E0D544E8F3AD3DAC6DED
+:10EC000023AA631C7DBEB9DBECE99008D9CEBF3BDB
+:10EC1000DAB770B02F869089E6D311BF2B9F37F5F6
+:10EC2000AD8FC07833079308FDB4EB4E3E6EA0D98C
+:10EC30008ED76DCD2E12B0F53D176372BA7D741E5E
+:10EC40005D219387DEA6F32F8D2774DDBB9C8B1D82
+:10EC5000302E9D2F214329163C49552D230991E83B
+:10EC6000BC4D741D9B4326D241D7997D847D3FDBEB
+:10EC700022C7BB22C09510931EFE178C477F004E03
+:10EC80004ED1DF41E1B2F38339F1E3E8F82F748B21
+:10EC900004E663551A1CBEB1B4DDC3E6A58D3BC9BD
+:10ECA0002EEAE050421C3A7C149D8ED3B5B38FD12E
+:10ECB00079D2F7ADD2F47880EFC5E64948B4818EB9
+:10ECC000E20CEDA1BAFEA3258AB7B1FDE3E1058E02
+:10ECD00087CD8007BAB017A23C55BE08F0DAFCA178
+:10ECE000B5C11F76FF3F3C142843E06AC26BF63182
+:10ECF000932740E173AEDBE401E0E5BB3AC5C6080B
+:10ED0000E3149CD0D3676E77B40E5E44AC1E900FB4
+:10ED10009A8EB6ACDA1DD6FF1E4F4CC24907FD23B2
+:10ED20008FE4E1FA2FF2FE1F9BD555BB2D948E295F
+:10ED3000C96EA2FD88AB9290C4FEFB13B29C325BFD
+:10ED40001F1C892B9E2EEE52F0D489EF5D80AF7E82
+:10ED5000DEEF1B4765F0A4E0857EABC6F97EE88157
+:10ED600071423344F8FE838EDBC4109DF7238EDBA3
+:10ED700076017DEEFF935502BEDEF1A7AE24B8BF4B
+:10ED80002F634B12D0FD3EFA4E10D667A658A36DE6
+:10ED9000ABBAC001F4F546F761E41F89046F1C9F0C
+:10EDA0000D6D93A783767B39BD723019006EAF71FC
+:10EDB0003AD9CBF97537E7D79DCD6ECEC7125E5FD6
+:10EDC000694EC7FBDB9A3DD87EB1D98BEDADCD3214
+:10EDD000B6BB9ACBF17AA8D987F70F365761FBCD2E
+:10EDE0006685D161FA1D65208FCE255100D0752D25
+:10EDF000774C3347C2E7F5929ECFAE73EBF96C3296
+:10EE00008573787B927D98812F47E89E4FFCEA1AA4
+:10EE1000DDF3A2D399BAF684CF0A74FDF343A5BA01
+:10EE2000765ECF0DBAFE33CB2A75CF7D85F3F5F331
+:10EE3000139D285FB6BB0494CBD3B2EB75CFB7C399
+:10EE40001F2087ED825F4D05B8540E284F03801FA9
+:10EE50001BC091F1F1AB1C3F7B003F36C00B83FF21
+:10EE6000CB007FDA7E09E04DAF3967955D83259051
+:10EE7000030DD8B6A60F767A28FC5F768A28FFB7EE
+:10EE80003437E27BFBCED59D1571BE0E09F0B29DE5
+:10EE9000CF679F45392B26405B90960B17CE2BA74B
+:10EEA00047CFEFA3CB17A2DCDCDE7DDC01F4F6CA92
+:10EEB0005797A6F7B47EAF92CA49401FC5DD545795
+:10EEC000A55E5CFF697AEB62E36BFD40AF46D2174B
+:10EED000C6716FF84A11095DC7CB3DEA0F62A01DEC
+:10EEE000F89628D1766E8F3209F0B63B5D708902B4
+:10EEF000F69B24C3BCCF1FBE11EEBF12329B60DE57
+:10EF0000FBCFC71158C776AA776DB4DF1B64C49ACC
+:10EF1000F114DE819E2FF7015FAA4E8B6714B97042
+:10EF20001E291922CA87CD636C26613CE83B330950
+:10EF30008C013E57109E5D5FA539E1BA395DE4F75B
+:10EF400083C8EF5767B8F0BD97CF672640DB448290
+:10EF5000280F02674DE5FE08EBBD1ABE436548CE9B
+:10EF6000F98F1C2EDA7FEFD93A07C897577AD8F86D
+:10EF700039CB420E80D3BEAF3638E1FEF6F42C1CFE
+:10EF800077C7D8A5685F6C3F6B42BADE3E669533A3
+:10EF9000331BD7E901D86D3F5BB72603E8BAC78CAE
+:10EFA0006D89282408F496CEF4ECE6B375E4307D40
+:10EFB0007ECE23FA81CE7248E7DE4170FF8A555635
+:10EFC00092C6E06FBE82905BD9CB64924B2F074A0A
+:10EFD0007BF4FAC41AAA9E3503EC08A067DA9E6A8D
+:10EFE0008ED73DDFF7EEF2849980170A6FB8F7CA23
+:10EFF000D9DBF78D05F9E367EDDF1F7DDA3A985E1F
+:10F000005BC6AE1A761BF4DBECF0D82478A2902F06
+:10F01000693BEFACD90FF6468E533F8F7D57572291
+:10F02000DC379F65F6D5B974B69EED9E7AF2007D09
+:10F03000EF656E7F4D3A36B202BEB79FDA4F60572A
+:10F04000BCE4F94D7C16C833AFA8A3370A1FA497B8
+:10F0500073DD04C7A13F83A6523814B22E940F7DEE
+:10F06000ADDFA1CFF7E5DB5CCB29AAB79FDFB9EB1A
+:10F0700076DACE4B14894857F22DBF7E7EF93F7366
+:10F08000E8DAB77EA6B74B6C44E0FADC8972A03FA1
+:10F09000FE9970DAAA7B6FAAD9A61B378F843D47E9
+:10F0A0007C5AFB9EA75EDC3ED9C2E59A669F6CB196
+:10F0B00028F37D40D7C15917D1A3CBB9FE6D447950
+:10F0C000B195104F470695EB578B32F0E1B9A37617
+:10F0D0008463DE23332610D4D7CA04E00724C63065
+:10F0E0007BC07BF422F68A4B2509B9FC5304AEE6BB
+:10F0F0009321DABF9DAAF9AF4187737D6E1CB73F9C
+:10F10000BDFFA06310CAFDC232A6171E711C403D90
+:10F11000DFF501D5F302FB4688E27D36FC017AFF7C
+:10F12000032BF67FE97A01E58866375412D94255F8
+:10F130001C99E63D6BBE9FE2CF67AF197B2BBDBE2E
+:10F14000F46ED730E0DF97C03E40F9D0E860F6417A
+:10F150008C1A4FA7B8ADC7867CB8E5B489D8C16F03
+:10F16000D866433AA57C7ADF58FA9D6D41662F74C4
+:10F170009DE6F6DE3607F2C98EDFB379742D733063
+:10F180003FE39455067B7CCBB21884F36829266054
+:10F1900086F19AD8F83D1CAF6F73BCEEE3FAEA75BE
+:10F1A000AEAF5E057B02F517B32776813D41AF3BDD
+:10F1B000B83DB11DF419BD3E7FFAB9F7812FCF6D6F
+:10F1C0008B42BB733449DF04F3DAE6B4E23C8D7062
+:10F1D0009EA7E8F9606E95DE6EA818A3B71B6E189F
+:10F1E000394CD72E4F1AA17B7F4AC2B5BAE765CEFC
+:10F1F0002CBD3C324FD0B5E5F37ABB61BAF7463D42
+:10F200003DC9617603CA3BBDDF383BDC6F4C053C32
+:10F21000313F674BCFED88C72D47D3062B6176C2B0
+:10F22000560EE72D4799FEDC1AFA32468960477C74
+:10F23000C6FBFD96E3E314C7C77FA7C82732860045
+:10F24000BF7CC9E46F3F74ACBDAFBDF799FFE3412C
+:10F25000E17A7DB828219368EDDF77BD3F1A9E5F84
+:10F260002A5F503A6D0F513CDF2DC67476D0575649
+:10F27000991B9F84B6AA9AC9C66C0447BA199F5FA6
+:10F28000E30179DC1AD3F85378BEB9C5E6DA900009
+:10F290007CF41FBF86761365051BBDFE312AC54F62
+:10F2A00028AB59334D38AF672CBE611ED09B826F9F
+:10F2B000FEADB4BFBADEEAD9285D381F67A6A0311B
+:10F2C000FB56D04322E7FB3F0B8A3393DE977F291F
+:10F2D000A09C8E9208EA051BF105807F48833C1FA5
+:10F2E000F8839828FFD0EBBD594A1CF42732915C73
+:10F2F000741C646DFA3D21B8F74F029D978534AABE
+:10F30000308EAD814A18CACF0F662889D8DF3C13EA
+:10F31000C77F7E2A2120CFE872B09D7D177175C40A
+:10F32000D2F911C5F4256DCFA7FE3E7CDFE4B80508
+:10F33000F5D4FBFF6DF28B11ECA55E38DF62391559
+:10F34000D2E82CED42FAE9E274B135D587F2D7F86C
+:10F350007E6626F307B77C344D04FACAB60F92C115
+:10F36000AEA00B146750F9BEF5F80D8EDA08EF4D1C
+:10F37000CEAECDCC1CD2D7CE0E6E126B9DE8CF8B0D
+:10F38000B0AECDF46F58D78BDDA600E0F79CD38AE2
+:10F39000F2A4BF75E487F471883CB007C2F88D9081
+:10F3A0006AD7C96B01DE9DC2D7D786D3977C5F38F9
+:10F3B0007D3D7F217D219CEF7E2B1DE1DA2A30FAF5
+:10F3C00052297DC173B5B411E94B35115F6B36D24B
+:10F3D0001BBEDF64B6BB6C54422ECD4C43BAE98AE7
+:10F3E000A9783F20E1F746CC447FAE86FB733528F1
+:10F3F000E75F3FC2E4BC715D3B8ECC1916027B62B5
+:10F40000D4DC61C0E75DA00086C2F473E7817DD9DA
+:10F41000DBA6E8423B70328190157D9E3D4F86FE13
+:10F42000D76BED1CD6BF84F55F92F9F07A159E2F4D
+:10F43000E0CF4925EBAFB5D5BC7925D0DF62C2F668
+:10F4400007BCFF431E7929D0E383197203E02F0321
+:10F450008C167AFD64BC7C33DC5F9A4970BD778D75
+:10F46000976F096FFF669C7C5B787B73AF9FDAC9EF
+:10F47000FDD45BD12E7DBD6726DAB312F1DD087AAB
+:10F48000E7F5208B476D1E39B01F7480DBF3FBB9A5
+:10F490009FFA06C8A3AB409F303F750FF7537771B3
+:10F4A000BDB283FBA9DBB95E7999FB492F713FE9B6
+:10F4B00005F053AF023BA48AC749989F9A3D6A5210
+:10F4C00019DA112ECD4F4D89E8A74EF7EAF5CD5444
+:10F4D0008F5EDFDC981E6FD02F7A7D332541AF6FB2
+:10F4E000CA9CD71AF44B96AEBF7C5EEFA7169F2D31
+:10F4F000D5F52F3CA5F7530B4ECCD4F55F9A2921B7
+:10F500001EBD476FD2F5CBEDAED3F5EBC39B0FF12C
+:10F5100064551F77821DB779643DC71BB31734BC90
+:10F52000755D046FAF72BCEDE178DBC5F1B683E3C6
+:10F530006D3BB7075EE6787B89DB032F70BC6DE11E
+:10F5400078DBCCE30B0738DEF673BCBDC1FDDDEC28
+:10F5500051BBD03F3B779A70BC3D2146C25B79924C
+:10F5600068C083C380073DDE4ACDC30C784833E0D2
+:10F57000E11A5DBBF054A6010F05BAB6F768A90100
+:10F58000FE3718EC864ADD730D6F533DF30DF455CD
+:10F59000AFEB77C9FCE66476DE5FCB6F7BB91DB756
+:10F5A0009BE36D27E00DE3441E1E8FF0F2B82FB3EE
+:10F5B000E35EE478DBCAE3425D8037B0EF38DE5AC1
+:10F5C000479E413BFEDC790D6F0722E2ED72F9EDBB
+:10F5D0003AB73E2E34D9A58F0B4DB2EBF9AD84E886
+:10F5E000EDBB895FE9F9ADE8B4DEBE9BF0999EDF23
+:10F5F000F24333756D6A0724640D013D7593EEBDCA
+:10F600009C609DAE1FF59398DFE2E17ADF5F89FA97
+:10F61000A86D2AD38F940FD1FE7EE67BD40EC8E866
+:10F6200083C7F306FFE9F97EF4F7E82C66D774BDCB
+:10F630005F8370CD01FD1DA15F06EF9791E5C2AB21
+:10F64000CD4CD4E84C9CE6EEA1743EE691CCEE3174
+:10F65000C7AC812003FC044DB97D7692E8F4111803
+:10F660009FDA4B195961F6A0D9D548C06E106D0FBD
+:10F6700055C3BA8868F2A0DE35D847A4C125DF0E8D
+:10F68000F76F1FE4E9A0B05892158BF370934D16F5
+:10F69000B033EECD920B605C711283C7E664EABBB7
+:10F6A00053786C8E626D95C26B236D8B83AB117E2C
+:10F6B0005D145E62068C9F40EEA2F3AACCB2323893
+:10F6C000CC235C9F6ED4EB43301868FB9968D69EC0
+:10F6D0009DF5CC3C35A94FFFD6FCA66BBD4AC7199A
+:10F6E000ED1C5A4FC6D171D7A97160678EA1F30383
+:10F6F000F968726C4B8E647FF76787A9E3E4594021
+:10F700001F7771FD3A9A42C49CD9FFFBCF44FBBEE0
+:10F710000DF8CD067884C5BDA66631FBAC12C6C90E
+:10F7200041FB520EB72F49B012DB6D198CBE7EB271
+:10F730006626D29B93C24B8C85F933F8CDBF93D10B
+:10F74000D7E5AE439BFF0074E20BB7A7C3E8E4AE76
+:10F750004874422A3C6EF4D7FBB3E75436DF566E4A
+:10F760003F6A76B22D49B39BFD1C0E24501087577B
+:10F770003299C235CE45305E53E332F9FD146451FF
+:10F78000B19902CA9D3281B852617499303C564891
+:10F79000E1F2C7181FF41E8D36C8F738831E1EAA63
+:10F7A0006B179F4D33F889D70CA8E7CB9C130CFA45
+:10F7B0006992AE7F79D28D063FB6D2E0E7EAF58452
+:10F7C0009998558E2F13C62D544132E7C27D82F889
+:10F7D000097B8E7E672F9C1F93AB905FB95F63E4BC
+:10F7E000D77BB32484B3E0627E8DC60FDAFB1AFCAC
+:10F7F000AC6E86D7B5B99A7EF2A0DEB105BE4520C3
+:10F80000AE4A6D68795318BD6D68B6BF5F368A9091
+:10F81000A79BC9FB651479FE66175E9F6876E3F5C2
+:10F82000B16609AF8F36A763BF75CD1E6CFFA8D92F
+:10F830008BD7879B65BCFF507339B63B9B7DD85EE9
+:10F84000D35C85D78E6605EF8F342BAA9DAE6B6493
+:10F850003BF1A87429A33AE9F7C2E036A29DCE2372
+:10F860000CEEA9AA4BD71EDEE4D6F54F6E9474CFEA
+:10F870008735A4EB9E272A1E5DFBCA2AAFAEFF1078
+:10F880009FAC6BC79797EBFAC7CA3E5D3BC653A5C3
+:10F89000EBEF485774CF7716170C0E0DC0C70F3516
+:10F8A00007820C2EC12083D36B41069F1EBC9E0293
+:10F8B000F94BF118670EA2BC88CB7651D2A1F8B2F1
+:10F8C000B3FC5ABCD923C4868D1F5F4EC74B0F9F14
+:10F8D0002F1D4FE79FF9915E623C41DD7D477A8F96
+:10F8E000EEBDC9A2B314F211870A458C7B1D2A8C88
+:10F8F0008F01FBE53E8B6B6A36A5C7834744CF0675
+:10F90000780F5E88202F8F71BDE8186747B9307D6A
+:10F9100085B04144A265EFD7758F8818F73CF87D14
+:10F920005205EB72EC7C4102BA985E581B1F15E63B
+:10F93000AF4D0FFCA9CC0DF75764E446D1D1A6B763
+:10F94000A75AEBC7F4AD4BEB57B7426F5FF6D1BD8B
+:10F95000DF0EEB18AD7EDF0EF2AD236903B63BD2AE
+:10F9600007CE93FC96DB619F713BEC248FC39CE038
+:10F9700076D871EEF784B81DF621B7C38E72FBF905
+:10F980003D6E87F570BFE76D6E3F7773FBF930B75B
+:10F99000C33AD29F9B82F2F097021123F8A9DAF5BD
+:10F9A000DB3FD3DB61DFF2EBEDB0A5EBF476D8E221
+:10F9B0004EBD1D56DFAEB7C36A55BD1DB6B0496F0B
+:10F9C000872D68D4CBC3F90D9374ED798A3ECE367A
+:10F9D000B74A6F3F6BF899EDD3CBC5CA72BDFDDC5A
+:10F9E000DF7A5F0A5C8FF91F40E2C7617AAF379F09
+:10F9F0000B7A85D245F679AA57300EEE6B85FCC995
+:10FA000056E842F56F9129F816E47DC8DB2281B8EB
+:10FA1000D3CE73B915D323D05FAEAAA79BEAA3FABE
+:10FA2000F8C64D77EAE13AE316BD5F622DD7C355BC
+:10FA30004ED2FB2595463DE3D3C355250A01BA3482
+:10FA4000EA1B93E31609E4F7E5EA1D2BA17A85B5D5
+:10FA5000757AC70A77D274CF51EFB467B3785D2E49
+:10FA60009D07180B2D5179FB3D146E3BDF35639DCF
+:10FA7000089DE0E19154FF14C3DF147E2F5B14B5A1
+:10FA800011F26C3C2F42C453BBBE43FB5B87B1BC3D
+:10FA900008F9CA7C02C657E82FE02B97D076989ECB
+:10FAA000CB09B2E761F3D53DFF31E06CC0F9C887FF
+:10FAB00047E6FE4FCE272601EC21329E8CC77A8383
+:10FAC00050DC25C5578DF7B303CC0ECA4E62769035
+:10FAD0003779A6C8F34F04421E5E13B1633C3385E9
+:10FAE000F837429C337ABF631A6DB6C29089E0271B
+:10FAF000E9F97F56C5C0F979A31F76BD34C2E0B7D6
+:10FB00005D6BF0EBF4FC6F2306FB254424B027115A
+:10FB10000726DD7384D3614E472DC7DAE6C3BA5E8C
+:10FB200048E6F9154E3F1338BE08D9B4AB963EF7F8
+:10FB3000BA4502FE868DA8F1E3A1BE28D82843DE8F
+:10FB400021CF6B7321DEC4651EB44B4F31FC78E9C5
+:10FB50002FE0CF4BC2F005F83BAAC79FCDF0FC24A5
+:10FB6000A7A70BE7C5E8E89F372F035D39E32EA968
+:10FB70008EC578BF24288B31747E7B5C02E651F7FA
+:10FB8000041B8325B47DC6CDEA865625CD34E37C9F
+:10FB9000893C6832C5C314BE5E2FCF6B753513B474
+:10FBA0003B9E6FB6E395904611E4519BFBF678D0EF
+:10FBB0008F5D29CA30A84FEB1A12BB02F2F39B2DBE
+:10FBC000B14991EA5A7658F2509F76ED48344BF499
+:10FBD000FD12B3CB0CEF9524D589E0EF5DD743D070
+:10FBE0002E28492298CF7ABE3970887D4FC13A1CA1
+:10FBF000BA8E49609F96B96A27C524407C96DA364A
+:10FC000012D8B9B1E8BFEE1E6243BCD95C4BCBBE83
+:10FC10004BD7772051248297E2C7433C01D0034958
+:10FC20004E8F1F86735B8E039C1BE8EFD7697D7A2E
+:10FC300081F2F9F1707CE491B036E615F4EDA1396A
+:10FC4000BC0E8AE347220AD659B4F5B0FA32128ABA
+:10FC50009C67F988DB0D5A7CFF28B71BDEE371B780
+:10FC600043DC6E6833C46FDEE276C36E6E37ECE55C
+:10FC700076C36BDC6E7883DB0DFBB9DDD0EB2F1028
+:10FC8000B505F28AF3883D04FEC2815A0667F70A79
+:10FC9000C15F0EF970A5D3574AEFDB5658507E0E60
+:10FCA0004F525B203E6EAB5227C33ADCD59D2D7080
+:10FCB0006D29EE4884FBF3949347C1CF067A999A55
+:10FCC000CBF99DE261AD95C179DDE218CF72A067F5
+:10FCD000654905F64B6270B3D35F8077E222550029
+:10FCE0003A702B161DBC6B0DF09D07ED30F9110D10
+:10FCF000F448E179BD06F72C92C5E0AE4601DCA3DD
+:10FD00006A39DCD31322F2C93A0E770D2E3B8A6F83
+:10FD100036A9B4EB5B49AC6EE2ADC29B4D07E8FC83
+:10FD2000BB6511F3AFDD49BC4E907FD738DE3BDCBD
+:10FD30009E5D5B3A70BCEE20EFD7DB6E27926D7054
+:10FD4000D838A5F75924FA7E55607532F0C5DA41E6
+:10FD50005A9ED883F6F564B1F0CD543ACF20AF83E4
+:10FD6000D4E4E51CC26163F8DE5B7C9DFDCDE7ADAC
+:10FD7000D21B2D121D7756E01E02DFB3991BDDE169
+:10FD8000F5A5DD7C7EAB66DC41802F8329A71BD0E7
+:10FD90008FF7D924B0BB87277956021DB89314CBAF
+:10FDA000F7E8FD69541E4A2E9856E78E04E847DFAF
+:10FDB000799400BD5CB309E8E1AD643BCA9DFEE601
+:10FDC00073811EF113B447FAD32354FEA03D64ABF4
+:10FDD000F8F428F8B595A4D113A0EF05B33D4380FE
+:10FDE0008F499505F5733AFD0DCFAB69D74A83FE70
+:10FDF00076782D03CAE1E1E79BDBC1EF780BF807CA
+:10FE0000F3A02406EA73821577D8013ED393D37604
+:10FE1000027E48893D348AC26155E1CA0500AF556A
+:10FE2000154B5D02D055D1087C1E2CB19F848A9C55
+:10FE30009E9255C95218BC57AD26C50AC03BF92E33
+:10FE4000F712BAAEB4A43F342B946F7A2CCCEF796E
+:10FE5000A7F47749A961FDC7E694FC2C07F8DACD31
+:10FE6000E87CB455498B541FACD1794B7134C665CD
+:10FE70008ED7B27A057A7F65137D55A1FAAAC3D3CE
+:10FE8000C7C78B393D458D3ADB00FD95D53609FD59
+:10FE900033B1BAAD89B6ABC05E02FBE9610BF2A526
+:10FEA000C6CFC98D7AB9A918F8B6CAC0D71A3FED1E
+:10FEB000BC908F6300AF51B58C9FB4F519D735EF67
+:10FEC0002B6AE7C41362F4EFDE5D34229AE9B130A5
+:10FED000FB763CCA26C94AD7378BD3D32C4E4F94D6
+:10FEE0002477C07C0EDE33622AE04B6DA17E00CC0D
+:10FEF0006D99A5CFFE4D837592415EBAFE594D6254
+:10FF000006F8A7E44E4B1F3DA6E9BE87F50273C273
+:10FF1000DB40AFAAFC0ED81110CE848FFEF1D8A121
+:10FF20003DADF47BDD43E3498B07C73BC1E4A384CC
+:10FF3000E31D2C140779E1F9BDA33220854FC2E9F6
+:10FF4000958E1F52D9F39A7B4664A2B9C9DB1F2D47
+:10FF50001B021564C45761E9EB0FFF2B3323FE67C7
+:10FF60002F133640FC6FB4F8C5E95DB4FFAC4A9B73
+:10FF7000A7958E3FFBC13A0BD8FD95AAB2A79EF676
+:10FF8000ABA474E177E13A747C72D84C2C30CE612A
+:10FF900059209DB43D6B969E6F6A96E9DB467BE4E3
+:10FFA000488C9262A2EF7F2AD8C8067ADDB17EE93A
+:10FFB0001330DE270FDAB0AE90C0B772410F101EBB
+:10FFC0009F949FB8873EAF5B6723901799C7EDFD5D
+:10FFD00041B9A938AEC9518DEFD776C4A05F7C7204
+:10FFE000FD95E300FFED718DB7413DF527B14A0D59
+:10FFF000E0B56ED5B526888FB447774E86FE9F9ABA
+:020000022000DC
+:10000000886B43066D4B0F59603E3DD43E8078AB04
+:1000100036CFDAF630FCC37773591C779A89289B60
+:1000200022D8350FE6F6D627A8B6B0F93F9C2BE1CB
+:10003000FD6969716D3F80EF50ECBB3C1C2EB0EE4A
+:10004000C92C2EDA9EE4A91942DB2704E25A9E004D
+:1000500057F943E04FF57E1BD988E827D8DF3A6C83
+:10006000E8531D61FEFF383EAF8F63D9F3E3EE68BE
+:100070003FACF3B8C4DAAADBE9477A362BE97362FE
+:10008000D87A842B6017049BDF9118C99A86F820D0
+:10009000D273745E750F3F82F8DD4CE103FCD9E347
+:1000A00092DA76D0799CA4CA5A85E7EE4727033CBA
+:1000B000EFC8A4849A78219CEECD8DC3F99C5CD7BF
+:1000C0001A8375262EA258AFE883476DE796BB8545
+:1000D00071A8E755263F18FF09244CBE53FC4ECBB0
+:1000E000FFA1A50ED61B453A012FA6DD2BEC30CF84
+:1000F00079B516CC8F3989AF1CE469EDC302B6E936
+:10010000CF1AD017759CBFDAA5B8BD40C7C7C11EAE
+:10011000477FEFB13D501F50CBE557D5223D9D2E77
+:10012000769B75FC32A349CF3F749DBAF6FA5C56B4
+:10013000D7D9E3FD2401F4733B5D36C0E5D336C166
+:10014000BF01E5AB2F25BCBE2E35D7A4C5E1254B9D
+:1001500018FCEB28FDD581DEB093CED24458F7A829
+:100160002940EFD623D1384F237CFFD5E1F071B27F
+:10017000543384CEE7634AC750FF737C7D2BDA2F5C
+:10018000F023EAF8DAD506F4BD84CEF25117D2A7EF
+:1001900075C6D83E7AD1E053BB2E752FF4737F1EFF
+:1001A0002351E789D4BA0B96823DD94B4706F8C054
+:1001B0009ACDDA7746F4D1193E8F406793685F6E27
+:1001C0001F23BFD496F5E6F55206AA5F467C1700BA
+:1001D0005EC7CF873C9426E7D616BF817470C645AC
+:1001E000FC22F36BDF06B91FC3E7A61239509F004C
+:1001F000CA84EA5D17DE437F399EAF37B64978AFD0
+:100200002C8B90B826F1BD327A33B62C18003D61A4
+:100210007373BDBB2DEFD7A3AF80DD0D04E3348333
+:10022000A22B3C015C8D2B11F729585C8960FF3CA7
+:1002300028085510B71F44F47655BC011E24DB7CFA
+:1002400022DC2E8FE6F27EE9E41102FA3BE57AFF2A
+:10025000D46CB08B7EDE4BD76CFD12FC49E1D846E6
+:10026000FD3790537181CE4EA0CF1A6AB7FA71FD57
+:100270001ECCEB58CB04F2A8D017BFFA67C52F2EBF
+:100280008883F1F8457F71302D1E50C96E517F472C
+:100290007143DEAFD24DFD9C416067DDEC46BFC9C6
+:1002A0007D12ED522BB74BA3462D72B1FC19E31F03
+:1002B0002D1E60A42B635CC9C87F46BBF4B7B9DCB4
+:1002C0007EBA865C7339F1012D8EBF2A9DF93DAB54
+:1002D000D2EB9643FDDA39EEF7B85413E271CE2C27
+:1002E00001F1A8D96B73BCA76701FF69F50717F384
+:1002F0007B3A0C7E48B4F729598EA03FAD792C2E5D
+:10030000E42864CFE7D889D91E963FB0E5313D3760
+:1003100087EA413B5DE234BE8F683AD1E7A7E2F855
+:1003200038DA95FE04337375F5827179EC3EE64355
+:100330006D3C1F6AE7F582251967777D0DF76556D5
+:10034000076C936B1FFF1E8543F4AC188F09E957A8
+:10035000D9F843F093673950DE26A44B58F75A95E5
+:1003600064F720EDABF2DBE097A19D29C194659481
+:10037000B77329FF065C03F83BF681E3664ECDDFD9
+:10038000296474D51B5FF231F96DA2BF404FB3AB46
+:10039000F4F4325719987E32F3787C89EFE31A1D12
+:1003A0003ABFE36BA40BC6BF6B53583EFA5C05ED36
+:1003B00003F9DB7EEC71CDBF755AA85F44F112944E
+:1003C0007721BD07D389251CDFBE425157DF10CCF2
+:1003D00027D12EEAF7042D24F941DA6F903CF70675
+:1003E00017F8BE25B6985AD41B7E9D7D7F908E7BD4
+:1003F000CCD9FF3C8C74BE7AD4128CFF3F703D0583
+:10040000199DFF6A483863FDDE73F3C16F7B00DA24
+:10041000585FF08BF9506FF74094D6EEFAB11C5646
+:100420006F70E796977FAC1652BFC64EF52D1DCF65
+:100430002111CC5311B209E5B308F14090CF63C24A
+:10044000E08B7E831EDE463B5E2C647114D1C0F7C8
+:10045000C6EFDE9CA7DF6FD7DFBA8DEFD19FAA6B07
+:10046000F4F47F7BDE00F5B2C6F79D503F1173F9BF
+:1004700075075490627E5A24260FF8CBA494E0F7B7
+:100480000417A32B9030A0072D8D833C0837DA8EFC
+:1004900002BDE0776871559C7414E05F847C620053
+:1004A000F5399D4A481801FDB5FA03857CEDB8740D
+:1004B000B947E5318E2395B3FCF2BB3209C1F7464B
+:1004C0003FBACE970BFEFA11AA6725D0E337AB10DF
+:1004D0002F3BBB8C607EC0E152B04D3F156A754129
+:1004E000DC8AB56B288C402FDBDCFAFAD71DC58F70
+:1004F0009658E9F3B632166F3DD81C787705A5B546
+:10050000B6C20294972BA063D87C833BA3AC108720
+:1005100051D4EFDAC16EFE689968856B7079AD0AC7
+:100520008B7E3751DD244810775008F8F9D665AD39
+:100530009381AFDEB5A89E3827E655314FDCBE5C0F
+:10054000BD15FC1E59AA284FA57CB4A1DD8CFB8CDF
+:100550008E95FE2E490AE3C3535C9E1ED811F5000A
+:10056000C06195600F45C1D5A26C589D00DFB37A7C
+:100570005AE814DF6DF941327C67D5E2559E9DF053
+:10058000BCC5063B50C9AAF5F62A187755F212F7F2
+:1005900092B071EDC3AC8D703F38B40DEB5A9472CC
+:1005A0008F352A16D6F5450CE467DB9765C5032D14
+:1005B000B6255A53EAA1DF923FBE990778974C9827
+:1005C000B7B5BA3B2DB0EEE16E4585FCF85F72948D
+:1005D00057F3E83CE7351D9B8C757365B12BE13A09
+:1005E000FCFC77DA01FEEFF2784C28B10EF3B56D22
+:1005F0008BEAED30DFE98969CBC3E3316D858BEDA3
+:10060000A3E97B696E53EDD24117D2471BC45FC685
+:10061000C3BCE87AC642BF3F342BB45F28D95A1511
+:10062000699FD6F13CE6EFD95B97A6415CA46DBD0E
+:100630001DD233A44D50D6417E404D7546AC631F4C
+:10064000EB65EFD528AEC95609F183FC762AAFE7F2
+:10065000C7EA48B02B19FEEC6662B784E9BFB1392E
+:10066000259FE685F9D1177C37B10DF5419BC0F880
+:1006700077ECD6CF7F0CF5C2BFCAF17D0EEFAD6A25
+:1006800057D601BC886A27838AFBE793D06A9242D7
+:10069000A83C6E6BB15545AA430B2D12A7019F5084
+:1006A0000E3A3628254C2E2FAF4F83F848A8E52A5E
+:1006B000E4EEDEFEEBED1F021E42EBD363411F862C
+:1006C00092EBD2D2806E395D1AC7DF94C7ECC95F56
+:1006D00067F92C5EB02BC7B0BC67459ECFE645BD21
+:1006E000DDE9063BF71B40B72930DF7F22DDA29E04
+:1006F0003B9E770AE98AB82E2D1FE9232133E65362
+:100700008BFF8CF1DE8EB1DAFE27161FD4ECDEA84B
+:1007100051275680DFEACBD7F25D857BC05F9FA66D
+:10072000E5532B587CD0457F23C5077D86F8E03400
+:10073000435BB337A778B97DC2EDDB24A9D3570A51
+:100740007277BFE8017F229930BD32A342F0839DCA
+:10075000DD521C6DC779E7F33827F7BFE6F179BFA3
+:10076000D76C27904F32390A57C2FCA715B0F93B16
+:100770001A32720212C87716E7260D3609E3268070
+:10078000FC44D2EBA7F96010BA9E790D4BD1DEEF95
+:10079000835F0B8BF310BD3FE12306FF6111B3C7ED
+:1007A000347F6BBEC13E30DAFBC638755F5E609346
+:1007B0001DE8E9EC98CC8369123E56035A3E80F658
+:1007C0005BE8ED5E190A933FDD5C3F1C6E96DF5BD4
+:1007D00041D7BFD2F7133BD06987D96F077DD2517C
+:1007E0007E470CD05F47B5580E7C1F6C2EC77E0726
+:1007F0009A7D786DF6327DB12F47BEDB1B1677AE42
+:100800002C2F796F4578DD837CFD7B2BC2E63FDDA5
+:100810003B43D7D6E86CBA481A3745902FBFF2321F
+:10082000FE3753BD8F7586E22F3D03D5DF507FF530
+:100830006C38FCD678F5F6EC7D634A070F64B76830
+:10084000EBD3E0A2AD5B7BDEDF3CEFFA1BE7F9D434
+:1008500065CED3383F6DDEFDF59F0EC28AF2FF5D97
+:100860005B4BAAA12E765F8EF22CC8A3CA326125FB
+:10087000E44B0FF378E2E1C218DCE7BE279DF97B79
+:10088000D10D8C6FA2CB6660DEEF72F17B9397D9AE
+:1008900095B30A05BF4CFF9CC2F7DBBF97CEF2B9F8
+:1008A0002DC53F7F13F2D0EF145958BC97C8D3A67B
+:1008B00086E5B1D65AFD01C827BDD75BA771CBCA63
+:1008C000BB683B5A932B55FABCC3AC59FAFCE17494
+:1008D000439E21DA2057821ADC7329DC47F4C1BD1C
+:1008E0003F7FA23FFA20E6D3D9A0878CF0B9CD0094
+:1008F0001FA3FF327D9B811F2ED18FD9D09EBD07B4
+:10090000F26A2AB5274701FEE0117D2F5A7E16D3E1
+:100910002051F98C1E47874EAD01BDD84D5500E8DA
+:1009200097B533EF5807ED7354EF035EFAFB8EE68D
+:10093000BFFD2A473EE38D503FD02B47C03E180FE6
+:1009400079C1C8F641F7A2495323DA0733EBD372D2
+:10095000605E33F4F641F7FAF2C7B3E03ED807F42D
+:10096000A73BBF5E671F90F2AC8BC087C9DDA85163
+:10097000D911EBF47C398A2B3F6C3D8EF446125E24
+:10098000CFF879AE1C9B4FDF9FC1E308DAF7A8FDD3
+:10099000B5DB12A17E51FB5EA697C53D49793CD3DC
+:1009A0000FFC7A313C6A75D4F759643CEF458B7B78
+:1009B00069FD3CF94CCEB6A7C90DF09C38332F32F7
+:1009C0006E8B16E748CFB882D70D4BA4D71FFAB36A
+:1009D00020E1F308FE1E81BC6474D2E9DD2EDAE565
+:1009E00013AF920370283AED57211F62AB10D05E0F
+:1009F000B22511B46B2ED5BFBAD47EED501C00FECB
+:100A0000561D8B97976498B11DAD881B402E4C3CAA
+:100A10003F5800B9E153C4A760BED1F2179FFD044F
+:100A2000F435D5FB1087F19146DC67EDB4F8303E24
+:100A3000D1514147CE8038CC724B1AC6D3539F8DCB
+:100A400071C3D7FCED102FB779D87EA82AAFBA12A0
+:100A5000CECD985E344A20F4F9341F8BDFCC81F878
+:100A60000D8C3BEBF40E88FFCCF632F9057E1BE8CB
+:100A7000CDB9F5778FFD91F4D7C46DFCEDF1D918A0
+:100A80004F92305E60880FD90AA7607C48AB53F163
+:100A9000158AB8BF9B2439F11C0A637CC718CF3173
+:100AA000C67B8CF19DEFE6B37D1A9A3DD598AF8F4A
+:100AB00017DE0D7B1072C05EA2A292F275878524AC
+:100AC0007752FA3C58F229B993CEC3F94313D48034
+:100AD000D37E7A3BEC52E55690CA958F6121BB5E7E
+:100AE000B7807F5B2DD7627CCF48F70FE5B378DD09
+:100AF0008A7CA72E1F1C6C6EE2EF47A980E7EA9163
+:100B0000567F546ADF3897CA1F8FE6CA0FE433BF97
+:100B1000A213E89C7814DC4F5091E7D2D12D691CC8
+:100B2000423E0E8BDF18BFABCD471BFF72E7713F14
+:100B300087F7A5F2C9DAE202BB957EFF0CC5B18842
+:100B4000FA921AD461F1692D7EAEBD570379832CD8
+:100B5000B02305CC1F68F7C3E2D866A0DBE82445C4
+:100B60008E74DED4A1FCDE3C15E631B5EF104141B8
+:100B7000B950CFF335DA7866E26E413E00DAD6E658
+:100B80002546889B138FDD4649A66E8D4820FEE3DF
+:100B9000247227C49FADED166C13B56A2FD8E98B6C
+:100BA000385F580BA7EC85B89AC617C6BC8D554C54
+:100BB0009A02C3D677EAF357C6FC94D19ED6E2EBED
+:100BC00066FA1198D7FFD3F04115B57869EB7D0A25
+:100BD000D7F30D5DAF46571559DF7643FD495B945A
+:100BE000B2AE96CE4B7DDC8EF10A07CC0D6012A022
+:100BF000BF20271FF7FE04E4EF5FF2D9F9376D023B
+:100C0000AB47D99DF88784F0FD0B7FE1FCFB74BEF8
+:100C1000C4E222661280FD52644C02F285567F7255
+:100C20003091D981D38B1607EEA0ED5FF07AC96BB6
+:100C30008B366AF9FE4125B9044B3F002E6BADACF3
+:100C40002EEDE0D566AC2723E2FE9D7724F4D5EDAA
+:100C50005EBB49EF57DE98AEB7078DF69FD5D08EB5
+:100C60002BE072ADB7FE44B1631D5922AF23E3F30D
+:100C700037F2C9CF9A595EE3E7BCEEFF977CFFE5F8
+:100C80007FF1FABD4D7CFFE5737CDFAC06F7FB2CF2
+:100C90000AC6A38F5D4F6DBAD8BE38E0DAE27BDDBD
+:100CA000C0C7E30B587C68B2E8DC097AAA6F9FC51D
+:100CB000C0E7845596EBF366B37DFABCD9DC2A7D98
+:100CC000DEEC0F59B2A76008ECC368580EE714CCED
+:100CD000582162BE726DDB19D4B3E70AD1DABE5077
+:100CE0003EF07D18DA3E0EED7E69013BB7C8B133A8
+:100CF000D102F5F83356C44E81F83971655E92FD24
+:100D00007603C4DC613ECB5D16380F62462011E3EA
+:100D1000A1B5ED9737CEEA5157609CBA37CE4FAEAA
+:100D20005900EF1FD2E2FC6AFA0288F31FE271FE5B
+:100D3000EA826B1F07FFE8E97C7926C06359BE5C35
+:100D4000599003F7995CA0EDD9E16DFAF35AACFE26
+:100D5000FC896A78AFBF78BA3849688C542FB2B82A
+:100D6000A037CE5507EF137B6F9C6B116B77E23E7C
+:100D7000BB26FEDDD6F748038CD3FA2269782E8293
+:100D8000DDFD9D02411BEF16982F716BFACD775B4D
+:100D9000A4F1445B6C0AF8FDC7787D9971BCA6028A
+:100DA000B61F938E7717BE9FD43BBF261C9F8FD74D
+:100DB000B77FC615034CEBA8514C3D949E489B88C9
+:100DC00075278E2ED754A84B225346601DCBA1B257
+:100DD000CA7F89FD3487CA7EF36FB99FE63705A9BC
+:100DE000480717DB4FE398499448718D97385DEEBB
+:100DF0002CCC1A1C1A004FD6A67D41B0337ADB6684
+:100E00008540DECFDA7400EFDF17E5AA89685F70EE
+:100E10003A6D2B5BE48394D0AAE42962B8FDF2BB5F
+:100E20006C654F4184FD8967469EDD05AA69669918
+:100E3000601612D0DEF608547E662F9B21BA25423A
+:100E4000BC8D0F4EBA923E9F9544FDBBB0751734D2
+:100E50003CBB8BB22B292C3BD49A40FBBD98AB1CDE
+:100E600082F18BDDD26E68CFF26560DDFB7DB1046F
+:100E7000EDBC63A3ACFE0DA917CEFB049F3795CB49
+:100E8000CBCD972197DB9AF5F9EF55C9A397C3FC12
+:100E90004797921048D834F7E912C8FF8DCD514ECC
+:100EA000005FA5B9896C1B87F7651296BF318E1B51
+:100EB0003581E9DBD1A1A4FB219E7C50F3F78B2F78
+:100EC000DBDFFF221CDEC6EB31CDDF5F19D9DF3F50
+:100ED000B6283E723EA0ADBE0EF201C756EAFDFD39
+:100EE00063EBDD35B0CFEF18F7F78F4DA6FEFE9818
+:100EF000FEF301DA3AA91CB24D00B9D39B0FE0769C
+:100F00003B8F6BFB72E468784EFD79075CEFCD9206
+:100F10009D13E0B9EA5A80FB9149E47DB2E4319730
+:100F20000C7E8EB6AF3DD3AB0C81F7B5FDB2A341BD
+:100F3000B4C5415ED4755B247A9626307EF9EBF316
+:100F4000A4BD794C13EEA3BEC438FDA5F693BC9B9B
+:100F5000583D8E99D519462596BA213F756E8C1D40
+:100F6000F57B3BFC2F4CAFA61428B91386848F6306
+:100F7000385F55BAB4EF6A75FAA0AF40BF74135228
+:100F80000EF2E681D8468C7B9471BC1AAFD74D70B7
+:100F9000713DEB4A0078A614F8A620DE9FDF24E11D
+:100FA00039B0FC7E7FF5FDC6793C63F57D80FBEBB7
+:100FB0004B4589D5E511E48BABD25DA8A735FBABDA
+:100FC0006E422A3B578184465AE93A5BE55DCE2C56
+:100FD000DAEFA3C7CC19F0DA4F638805E6ED4BA72B
+:100FE000728EAEA3D4AD0C1F483EC28944262F5C3E
+:100FF0000382C98DD778765505B87F013F3E767656
+:1010000008D8E33F7D9CE5A7AE7A7C91BD2E6CFCB1
+:10101000472670B999C4E65F230B7E2915E6731A3B
+:10102000F350332493472690373E77642EC409A9A2
+:10103000FD360ADB67B01D944C5990D7FEC8FDE51C
+:1010400011E87FD5F7175F81F4CFE1B17059D6333E
+:1010500068E7E728DF03FC070BCFC48C188376FC16
+:101060003AA0FF8502F145B213EEE778BB416EBCB2
+:1010700009E8EC06D94660DF5AB0C48670FF699172
+:101080002081DF3A1D681EE2398F9931DE4CE17113
+:101090000B3CDFEF71E0B9D1A5F2B36668FF61AC3C
+:1010A00040AE1C401F5F365C0BCF0C017EFC08E895
+:1010B0002FC2FCEB38FF6AFC44E15E8AF39259BD13
+:1010C000487F74F579BEBC0EE8B23D4D69C073111E
+:1010D0005D332FE95CC4E93FF363ED9EEDE9C6A102
+:1010E0002442FDD741CE27C6FBFF3981F9054B3895
+:1010F0007F5CF5F8D9FDD7035F2FB3B800AF4FE79A
+:10110000FB7E0178EBF5BBFECE7264B2588DF80B16
+:1011100056D0B9E3390E2406DAD3469A117F6A29EC
+:101120003FE7E32EE26A8DC5B7B06D5F26209F3999
+:101130009C9D5560349BF31B8FCC86F74A44DCD7CB
+:101140001FB6CF65C03AB210DF7FD606FBCFA82D01
+:101150001F5C216AE76E1181CAB6609999DBF79F1F
+:101160003E2ED33F9FE1F5991F14894F407DE61134
+:10117000136B1F2A125396D3EF8452D83C3A1E1495
+:101180003C2D125C9F5A07F9CBFA26C1534EDB3532
+:10119000817B7A20C4B5E4611B0157E1931F2E9D2A
+:1011A00002EB39E32678BEECDC44C6374A90F84DB2
+:1011B000A97DFEED87C9C4AFE54B611F9D97EB99F3
+:1011C00087601F1B9DF775EA77D5BB216F4AFD5ECF
+:1011D00088ABC579583E333A68F6F809F8BBAC3E9F
+:1011E000B2ED7E813C04E3886B5AC13FB7F17ADDF2
+:1011F00068B916FDC7384A9F1268D09059B78FADAD
+:101200009E2848BFF1E5943332E0AAF78FB32FB29E
+:101210009F6DEE8221B1C02FE726E8F765F4175FD6
+:10122000D7AE70DE0DE0A78BE757B752BB1DD6FBDC
+:1012300022B5DBE1BA8DDAED701FCEA9862BEC6703
+:1012400083EB4E6AB7C315F6B3C115F6B3C115F6F5
+:10125000B3C17BB09F0DAEB09F0DF71F16A981C122
+:10126000009F926802F9A1360BA33335D98AFE4656
+:10127000A08860FE3E986CDDB01CE27502C3931A34
+:10128000CB9E0763949BB19D3A86E577CD9E14D89B
+:1012900047B842182381FDD46E55B07EF9D8723319
+:1012A00081FAE5D054E103C8BB10C1E411A97DB3B4
+:1012B000FDEBDB10FE8B656282BAF4E5706E28C828
+:1012C000E3CFC806169F0B8A70BE5C6B0CE1756499
+:1012D00037F9654A7F2705ADBD57017F7422C404E5
+:1012E000907E7729F07C7193C0DBAFFAE59150D7FF
+:1012F000A03D7FF349882FAE30B4BB4DBCAD0E7F0F
+:1013000012C63BA27D4F1D5603E31D49D39E272ED7
+:1013100084F6C751DAFB9F2F84F783BDF33989E345
+:101320008592B5FE520DB67BFDE7050AB687B0FE85
+:10133000EB77EE7B0AFCE5BFF778AD8A8A717C75A6
+:1013400016211B6323F0FF44511F0F95055D3C548C
+:101350008BBF9B1CD557E2FEB3076C28173F4E2668
+:10136000E887F417170D8BD7635CF4E713FB897FCD
+:101370001285C0B855100FF4E05795F0FD69446828
+:101380002450A7EE3B1523811D694D0A8BDF71198F
+:101390003050BCB0B591C507838A85A8A97D75FD7D
+:1013A000D6425ED7CFE3855A1D83B5F047BABC81DC
+:1013B000315E48C45B301FED5BA48F074E572E2F64
+:1013C0005E584D02962B81FE65C103FE7BB54BF93D
+:1013D000F00AB4F7AF61E7334AAF61DC54DB37069C
+:1013E00077E0DCA92ABEE68E5B8F7D7005EDE75FB6
+:1013F0001E25C166FCF9B794E0FBF9748510DFAADD
+:101400002E4A4378E77CE6794D0279EA3679989955
+:10141000E6FB7E22D80B8B62316FB2E0CE8C0F617F
+:101420009CC5AA03DFA37625A7F7AE27809E4408B4
+:101430005C86B5B35334FA9BFD04D0FFC478AD1D70
+:10144000FDA45C484889557B3F07DBF314CE7F6AD7
+:10145000FA93C07F474A357A7DA3069ECF1ED13BC3
+:101460001ED2F74487D6BE71213C6FEF1DAF1EBF61
+:10147000F70E9C6C84ED494F823E2A99A1E9ABE3BB
+:101480004FC0F86DD5DAFBA3FD108F9A6FD2F887A5
+:10149000F8819F15D2DB96412FBECFF9FFC8B64D1C
+:1014A0003550D77593F65CDD84EBADE6ED77B62964
+:1014B0004F023FFDDBAFEF7FF87BC6F602129C7C4C
+:1014C00065761F5F18E5D56BC54C8E781B9E05723F
+:1014D00025D58D4FE1F96E100F60F9ACC4593E90DF
+:1014E0001776D1433983F8DC2E8C731AC7595CC444
+:1014F000ECEB4F0BF579B136435ECCC7F353FD8D62
+:10150000F3269F4F7B69643F766C4EE99785503F89
+:10151000404E8B309E8B020CCE276BC952BE82FB95
+:101520009475F1DC4D2AB23C709FFAC52AD899D344
+:101530002838210FDB52FC28C6E943F916DD792053
+:101540005A9E73AD5546F9F809AFEB985F2A4FBE26
+:1015500087B66B878A6403D6793831DF601E667D73
+:101560000AE53ACF7B6AE7714CBBC8BE08E3BE947C
+:10157000CFF97ACF147658403EAB449D5C968DF2FD
+:101580003A08F5C626C71ACC03DB8A2D9847D0F255
+:10159000CF0A3FFF5BCBFB4E3C3F98E9F7742DAE83
+:1015A0003B70FE5769DAE143FBA0532426E1C27C7D
+:1015B000F0629F9A0CF52CD3CA6270BF4055DDEBE8
+:1015C00038FEA11482E70447CF6AC4FD41666A1F52
+:1015D000CA00179E2FD6EA63869FFF0EEE1BADD77B
+:1015E000EACDC58A0360A7DA1EA17E1674E0F96011
+:1015F0002D5F3CC320EF171756A29E25D48E1F15D2
+:101600000BDF1978DFF3031359FEF84427ABE7F734
+:1016100016E9F3C0F759589CAF3D4D4F571B273281
+:101620007FF5075C9FEE2CFE7915DACFC4E481BC10
+:1016300018798C9D0B073116DC6F653C8F397D0E58
+:10164000DA758F0DA74BA4B6B6B9E97D8C2B0AEBE2
+:10165000D87B9F8D238DE0B798CDAC4D2F2AE4FF2A
+:1016600033BDCAD422A8B368FA10FBB7AAACDEBB5C
+:10167000BFF8CDBC226D9F088BDFCC77EFED817D6D
+:10168000657F731CC7B0EFD527B1FA929585929606
+:1016900047C0730929E15AC05E4C29F0D5C3BCC9C3
+:1016A000984D12CC4393373B5EF9760DC81B224709
+:1016B000CE4B6B7CDF66C84BFBDCECFD378BEFAEB3
+:1016C00081F30DFACB433C5C2268F1B53B8A605E46
+:1016D000095ADE40BE13DABD7A1416E4D5E9D18585
+:1016E0000DFF0BF4689FDDFE760D8CF74D9B3FA53B
+:1016F000ABFF42BC96B3F8D9376DFE1326C87B60AA
+:10170000FEFFE8EF8C99E07B0BBEB35A90AB9C2CAC
+:10171000B9E711F479BE778B06C8F35D2CFEF07F34
+:10172000F18681E30D62F1BF66BCC10A7BA87290AD
+:101730008FAE2C06F95CC8F8E8DF5DEED1F5E6C0A7
+:101740007A570B9BFCD123FEFEFE7E4A8132A918FC
+:10175000F5A062DA49E96775899DD9330106DFDEB4
+:101760007806CCDFAB8B673CD9F00F8867D0F55695
+:10177000227ECBF8F7BFF9F8BB15E12B337BE2DF14
+:10178000903E57E3FA36B1F5FD13BEBF1EE9E5976B
+:101790008C5E7AE1C3EDA430F82C6CF8E7C0E75713
+:1017A000089FAD6C7EDF007CEE42787AD87C2FE615
+:1017B0005F1F2D1434B9FC06BE97CDE8E043B0AFEF
+:1017C00099DF3DE94AA9CFEF7E34573E50CCEA631A
+:1017D00082C5BAFA4FF910B407F08B8FC0F3087EB8
+:1017E000F1FBC5DF40BFD859C4E0D69777F1B3739A
+:1017F0006F49D50D57D3EF7C48E10DF1B68E261118
+:10180000ED8B734904CF03D0EC8D502CABDFBB7054
+:101810003F581981FD88B67C76CE88763E8059ACDB
+:101820001E1C902E84EB81418A15EABC96C8196D66
+:10183000B0BF75D29A2F70DF9555B6E1BFAB39DCDA
+:10184000EDB1DC097E34F573AF83786A830BF7D191
+:1018500069FBCAB4FD1F4B02F3F6C23EDB0E4A0F12
+:1018600089F43BD3CB2CC7C3D76FB437CC86B6F142
+:10187000DF354D98A8AF07A4F047FBE7DC3A561FC9
+:10188000D761263BA1FEA35E15FD2DB4BD718D80F1
+:10189000E7712EA270027F7F52672AD6935B93D89E
+:1018A0007967DABF7B4AE9A0331FECBF2322C17FEF
+:1018B000C78EEF27D3CEF98E9A7A1ACFDBFA98AE7D
+:1018C0001FCEEFD1CE9998C1E9448367544B3CC2F7
+:1018D000E51C850B01B8F0FD36D39A583EB8AD7AB9
+:1018E0007110C8BBA6F08B1591EA52E6B8F5E7A5D2
+:1018F0001BE319C6F3C6CDC43718F6D54D2F2C51AE
+:10190000C15EB5F17ACD6822E3B9161FAFF9093B84
+:10191000D7A2CCA23B47C4F8DD68039DDA0C71075F
+:10192000239D1AF1729D012F1BCDEC9CC1B66ED187
+:10193000A3D2DB6D0F2F6A877DF9EAC32656374F96
+:10194000643CF7A98D5ABCB8FF9C4E16E2F573397A
+:101950003C35BC10D268017EABD6F6A19B1A57C2AB
+:101960007ED2797C1FFA4D6413EE3358001604FDC5
+:10197000EE4208918B70AE8C6465CE818BC03CEAE0
+:10198000ABD83919265803E4091E3621BFB6B977FA
+:10199000E2BFFB15186A893D99CEFC8948F66C6F49
+:1019A0005C8142E264581CFFFFE2577F5BFC2AB770
+:1019B000889D47D5161570E5A7B2F326A09E29B7D6
+:1019C00048423918B42829B8DF61FDA72AD081B66A
+:1019D000DF81FE2CBB427F6EC2FA8903F87F45454A
+:1019E00004C76B4B0D25835CFBB09FBACAEDE03892
+:1019F000303DB46122E6DFA9FD9B0D728FD9BF1582
+:101A000079BEA7F13EDFE7ACC5913EF12AFF39313F
+:101A100007F6E71094C3B60AC10FFB77A63B853DD6
+:101A200082D4F77D62AC63FF5F9AB7BA93FB6DC156
+:101A30002882E720055349D57311F0F1835216A788
+:101A40000C6644C697F69CDA19EF4CCC61FED020A8
+:101A50004614A7ACFAF8C00703D18786C7F8C9F2C5
+:101A6000471373FADA0FE4299F40BB55F17D0078E4
+:101A70003DA98A12E8151250F03CBF69FF21BA0057
+:101A80008EFFE83CDCCAC2D44BCAC355039D0D503F
+:101A90002F78B9D7FF0FF9613D6B0080000000007F
+:101AA0001F8B080000000000000BED7D0D7854D561
+:101AB00099F0B973EFFC24998409041C24C00D0229
+:101AC000461BDC81802440E0CE4C12124860F83581
+:101AD00002E285008D5DB451791458BAB921102005
+:101AE000A260BFB4B5EAA34310DCDDFAD4D475AD6F
+:101AF00088AE23A2A55DD4A8A1C6556910E4B3ADF4
+:101B0000ED870A6BEBA7F57BDFF79C3B73EF64C2B5
+:101B10009FB14B9FFDC2A337E79EBFF7BCE7FD3FD8
+:101B2000EFB939EA648C4D82FF8CC2655A01632D8E
+:101B300058BE9CE18FC6A0BCB8BFA59C0B4D3B799D
+:101B4000FBD1DAFF891A2319D399E82FDABF23F1E1
+:101B5000F6478303A28697B145A21ECA3A96CDFEE8
+:101B60008C29794105FAD749667997A658E7CBDAE7
+:101B7000A5C17C279CF6F19788F18AB42F69FC48AF
+:101B80007CFE2FA31A948F27C17F03E3E552EDCF8C
+:101B9000D47E65BCFD9F755CEF49C92C8FD2B1FF27
+:101BA0001197D9FF8A6538FF3D79BC7E6A6854D4A5
+:101BB000B804E1F9A6C7BFD0F647A7A88C0D047CEE
+:101BC000D4FD2C7C19FCBAA47E97AC43BFA3CEC82D
+:101BD0007B2C07C8EC5E49DD037D8A58BBCC6402D0
+:101BE000DB258F87213489B5C05C2B42F0BF09808B
+:101BF00047AF83CF6304A21AD0D9E2A9269DD64469
+:101C000071DEDEE8EE9DE0771FC27527E0FEEE5242
+:101C10001BDCC6A865DA9404DCE110B487F116DF9A
+:101C200072931FE15C3CC25CDF249AA739DBECD7DE
+:101C30007DD6795F7BA194F0BD383E4F25B55F9C82
+:101C40006E8E37278AF326E05A48FB91806BA80DE9
+:101C50009F81D042C267C417DD3C08F013F1B38006
+:101C600001F85C54D728EB05163E32C22AF1913FA9
+:101C70005E8EDAF9A880F8A8AFE11A3629B24D8352
+:101C80007D62F9ED6A64CC37B1EE98F3325CB7212E
+:101C9000D1BA4D3A5AE2B3D0BB07D6AD9AE52B97ED
+:101CA000D579FB62DE8E329AF723C0374BF01333BF
+:101CB000062FD3BC173E5E9377B90BE15EA5495A58
+:101CC00014DA7F853FD312CFA35324E217C0E7BFB6
+:101CD000123E8B009F99F89E111F3C5E18F9B906C1
+:101CE000F54CD51D07002E97E6612D8083AA8991BA
+:101CF0007DD49EEDF423FE01001AA7F975A6209F5E
+:101D0000016F051C93A1EC6435ED29E6FD61C84126
+:101D1000ED9B18AB6807F8C66FF4AD8A7813F5BE73
+:101D2000320E5796781EC9ECBE6120CCDF0D551BD4
+:101D300061FC260398179E1FD4495109D6FC416EB9
+:101D4000645631943BF21C818D307DC73AF7D03513
+:101D5000D0BE2BCF1B40E8BAB27766FA60FC0F0208
+:101D6000B2C0D74DEF235F1FC98CF39381FAA5430F
+:101D7000E0F7D75A711BF2D3DB2A2F3F50FAF7EF67
+:101D80001B05486FCCC706011EB007F0AA23638A63
+:101D9000C70DF3BACA419C605F1FD35D50EFC67A8E
+:101DA00058E29C1FECFEC13C95E4C6CB23AF65AC6A
+:101DB00006DFABD85F31BA3D34AFF295444FE6BC95
+:101DC0003631AEABB5E9A526809FF9651642DEF245
+:101DD000F3F67ED6DDF89503C787723E43127CE1A9
+:101DE0002B58BF24CAF8F3152CD1CB2215790857EC
+:101DF0003E0BB4C07C7374E789783D7F6C57AE1599
+:101E000070223CF2868A6278A6D7D9DBCDCC87B225
+:101E100027519ED15A1B42BCCFD0A0DB58C60EB76B
+:101E2000D6C66A01CEC3456E9F049876E52AB6F6FB
+:101E30003359FB26C43B530F1D94012F4BC57C4DDA
+:101E4000BE39EF31E8B72A1F4AB0FE23FF10CC9C01
+:101E50009083FC26071CA28DC3C407A3764E079768
+:101E6000D30109DA373D63EEDBC436E4033943B20C
+:101E700095832EB37E4C1BF2E191B85C1DB91CCB4F
+:101E80000BAE30F926B30DF96A5A8659762D473EC6
+:101E9000EA569C429E0D6C433AD96A8E67EC20F953
+:101EA000F21633EB1D541F89CBBFF25D585EE81369
+:101EB000F018DF2779D8A4717D72D50BB16EE322BB
+:101EC000DA037F5E19447E8B7079975C3FA933DA21
+:101ED00094857C07F819A5F6E4B7F54199F828A28E
+:101EE0007D2CE3FE95D603CE60FFC23552E704A4F5
+:101EF0004F850D45BE6F6E009D3E0ACA2FA6B9D410
+:101F00004C94EBBE722D05FFFE3CC8F97752D09B76
+:101F100073127157C80A91EE9A1BD69AFD0DDC5FB9
+:101F20007DA42B9A96D7FB38AF851D24673A24DF12
+:101F30007CAE9F6586FA3978EF15DE629668F758B1
+:101F400098EBE5C6426D7A10E69D05E297C11E3614
+:101F50004EBD3F1282794E143B036EE233ED0DE429
+:101F6000B3B9828676B834B60EE546B1DBB71165F3
+:101F7000B75CE05C0B656508F02B962B387DEBF0C9
+:101F8000EFAB1138AE92A07F8063CE5A3B3F28CC96
+:101F900042DF50BF28989973F25B50B89A5D8DEB81
+:101FA000BFCBE95B8A726CEB08DF2D5679F6689837
+:101FB000CBB1A858EF81A9FF5283F8F994390228D0
+:101FC0003FF6A647489E1DCB62AC0D75BEC654DFDA
+:101FD00020E46BBE0E297F21C3F60F0E87250C0669
+:101FE00038D6BED3515A08EFEFE3FD3EBC86D53359
+:101FF0007CAFF0323C0C632CB63B4AEDEE0C8EA06D
+:1020000079D943018F07691F9AE37E7B59BB139FE0
+:102010008E8C6787EA29F6C77CB2D5CE8FE27840EE
+:102020005E024D88EB9698EEF80AD72FE43FD0E990
+:1020300006DC1F90FAA447267D78CA466FE3822A01
+:10204000C1914C77D0AF89FACD37FB31A76EB1D7AC
+:10205000D7077F146D1C49FA681BB5F3823ECAB1DD
+:10206000E9A3BB8229F4D1C84AED6EFE9E97A1FF79
+:10207000BDBDF4FF5FA9FA43FB1FD27B8F4EF8AAC8
+:102080009AA8FD08CBE38799F2041A1681FC186020
+:10209000CA8FF41BEBA658E48F31E1619437D7EB7C
+:1020A00092A8CF7F98F44EC8ECFFABA57679B4E048
+:1020B00061BB3C9A7923D627E44FED4376F9137E32
+:1020C00018E545708ED06BECFD8770FCE62566FF49
+:1020D000D1D120DA250E531EB228F2A1CEE2659BA3
+:1020E0001D79E4D9F6A5A8E74CBF8919ED0F213C6D
+:1020F000A69FF1D6B3FAC3A817412EB2E3261F8CD0
+:10210000E8C9EFA61C30E9C7B40F5F7B31AA1BD02A
+:102110006E6E8516B3EE4BDCCEECE6764FC2BEFC9F
+:10212000DFDCFEEE7BFBF1759ABF80D3DB3730FE40
+:102130007BD6F14D7B0ADE7713FD89F7979A3F072F
+:10214000F09D26F8C673F82EA2FF17B4EE00D75301
+:102150007F0578D343163FE012C4E7B04B1CBE7135
+:1021600021DCEF2ABEDF8F69CC94E31308EE1E74E6
+:1021700070DEF45F42E396F2755BC6D5ACF3F5E62C
+:10218000AF43BB327BBB38FF54105C62DCB3F4AFAF
+:10219000B6B78BF78F842CF4D9077CBEC8BABFDFE3
+:1021A000801C5945E38FE4E3CF4BE0F126EBFBFFC6
+:1021B0001F373B279DEF207AAAE7F4741EF6F60F2F
+:1021C00010BFDBA4763D8BE2448689F7FB701C7858
+:1021D000DFED82F731B11F8F14471EC0F658F48F20
+:1021E000B3F827C6DC5D085FC23F81810A2CFA9EE6
+:1021F0005DB70BD763EAFB27428B761940277298AD
+:10220000B77FF4C0CBCB70FDC965B04BFE99F63FEC
+:1022100007EC92316497FC0BC275AE7101FE76C279
+:10222000C3D39C6E52D43F49E33EC6EBB7BAB81D48
+:10223000FBD6924FC98ED36E551D68C7997AFDF9AA
+:1022400010B767C11EA9887A7BDA8DCF8B781A8C7C
+:10225000FB3CCDDBCEF1DF199133D1DE4CD82D31F3
+:10226000F2831276D50AA2A3B85DC5BE4DE5A96278
+:102270009FDF087D679980F7571C0F623DE76EDF8F
+:102280004170F879FB14F59D345E2E8793790F9D8C
+:1022900040BF95E895FF8C7440799528049D0B4AC2
+:1022A00072C06E39D02AA948262BEF33F7F976E2AF
+:1022B0008BB8DD26F8F07A41C79F84D6D33E5E7F87
+:1022C000DAE4FFFDD47E7CDC4F5D4FF0BF2DE213DE
+:1022D000DF0BAF37E1FB90E053397CDFC0F8A70993
+:1022E0003F8CE3A786194EB4CBD0AFDCC37AEEEFB8
+:1022F00017228E03FDFE2FF5F370B86A7489ECF790
+:10230000C88A634EA4F7A59D4C4B451F72D865F64D
+:1023100097C364970BFF36C0E342C9EDD3C2717A0D
+:102320004AA3F63E3EDF86E2480696A7E8AF870757
+:10233000F1ADF1A03D1A2995A22D79E8DF78CB4ABD
+:10234000A13CC7C1BAC9EF636C33C67DDDCF2AACEF
+:102350002540AD55C512D7012EFD35FA910BC43E6F
+:10236000CF61F1F88A03E33596F80DF981EEF09D1F
+:10237000F9AD2AC55D286EE3F2CBE45704EF5E4168
+:10238000F191F422B7CF8DF3C8B9E4E7BA1E10F18A
+:10239000A2F9DCBF74C03FB4A3D3D732F2DF666DBD
+:1023A00097A22AD4BB357BFCA576C3A926F2EF56AB
+:1023B000309F067EA25264AF7725F9AF8D857A00F3
+:1023C000F172F2BE5A07E22358C9FDB093F75DE1FE
+:1023D00045FE4BF6A34FA21F4D52AA871F6DACC3FB
+:1023E000F89AC58F5ED3877E74386CF7A38715473C
+:1023F000CAC248E78A46F2EDC0D44973C95FDE2EEF
+:102400003337B43FDE3AFED522281BDB9500861B0E
+:102410003E706A4BB1DE007F5A1E46DBC430BE35CB
+:102420005BC07FBCF85429C2AFDD3E2C80F47EFC3B
+:102430006E37E1F9F8CAEC68068C97B5FDB34D69C3
+:10244000D0FFE5E8100CB2C5FDEB643F1CDC2703B0
+:10245000E9E6381BCA5A701F141FC37195FAAC8085
+:102460001148F8DBB3F37D068EA7473318EE7BECFB
+:10247000974C3A99CFE8C801E9780E539D5898C710
+:102480003427E27F01D3A97C1DF09B7405CE976FA2
+:10249000101D00DF61FC6E7DA17E13E1E3414E1F44
+:1024A000EC1E65179E571C37EECD443EDB9B6E8FAE
+:1024B0003798CF3522DEE0413F7F4C9FFAF9EB0899
+:1024C0001E2127CE43AE34F0FDE4FC7A1AFDDF81F5
+:1024D000A427EB90CF3B441CF89E6C1E3F690D7304
+:1024E000B992FC0486CFC1FE17AA27405FEE08DB35
+:1024F000FDF89D583E0F7DF94392334FF2753687B4
+:1025000099297F7E1CE676809A45F11410C5D7F292
+:10251000FDC59FCF25FD611C5F7B4CA2FD4A531971
+:10252000C921378BC4383119623D6CC3207BBFBDD4
+:1025300067EB776390CFFF4191FE136C57720A28C7
+:1025400014DAB9AB781C7CB6577A495213ED8E6019
+:102550001C2A55DC5FC85168167380BDB2230BF688
+:1025600000E3DB4AA01FCAEBB71AB4A368C31D6916
+:10257000A8A06797524FF2A3EB3E39DA085D5F6D72
+:10258000601DA5A37A8E5BB32478F484451ECD2EFE
+:102590007BC403429135E5B71D92305EAFB9553724
+:1025A000F4EFC88CDC83F17AE37599ED017817CEEE
+:1025B000AF3C7AC2221F92C785F998012CFB56982E
+:1025C000C7315F0CBA63D3009E1586144579B0C23B
+:1025D00038E6C478E5D2B5CB980EFBE42A3AA6E0FB
+:1025E0007E96077DB4CED94532332C70DD7FADD6D3
+:1025F00011E6F19D37687F03713BEA4D2C079D5A28
+:1026000096AF20118734CF051E0BEF267BB4239B9A
+:10261000D1FC113F8B36A2FCD296B9BAF19CC51FF2
+:10262000A1B8E9E1B04AF3AE6CDD45F0A44FF998EA
+:10263000E001DB39E6E8DF13DF261FBC2EF0DE2CDD
+:10264000F0DE1B9E3F09F3789E599E5DA664229E94
+:10265000DF50543AE7E88DBFE796DAF7C7EDAFB041
+:10266000959BB4DB1D484F275BE528EE133C5FC10B
+:102670007D3B0DFBC6F212E37464B21AAB7E36F7F3
+:10268000674AA94C7099FBB3743BDF9FA5DB838439
+:1026900097A5A595AEC1FC5CAD1D689BE945CB181F
+:1026A000E2C5A51D53508EF5B65FC06FEE528BFD8F
+:1026B0007811F1F37EA516BBF69B8EEFC37C4369C0
+:1026C000BE243BFBAF75BE60D25327CAD582845C63
+:1026D0002D2BE5FA20F969CA558B3D49714D0B1C2C
+:1026E000CBEB2E020E934F904F516E84774ACEEE75
+:1026F00002DC7FE0D731689FFD76F36539C8378CFF
+:10270000E8C151CAF9C635658E0BFDA695F77DACBB
+:10271000A0BE027C4E277C0A393CB694997A6806A2
+:10272000D1451DA78BFFEE731D806709C1B984C316
+:1027300079A99D3B7DA73A525F4AE7402097BC1894
+:102740008FF789FD674379DCFBC2CE373F68BD9DBB
+:10275000A11D38E70F992ADA818B8AF768796ACA4E
+:10276000F34D55B29D6FD68618F9158C8506B37357
+:102770009E6F269F9FF63CEF345E6ACA49D8DDC93A
+:10278000E79DC9E79AAC97F3CF9EE79D2F561503B7
+:102790009C3302B24F5513E799AE2927DF65D7F472
+:1027A0003CEFFC12D623F099C32CEBED1AAAB6C766
+:1027B00000BE96C19E401B6FCEE46B1378043DE0D3
+:1027C00071C33C9BCA007EB497F3DA7E308FD9F098
+:1027D000E8223C5C201EE97C1BF1D22A4537627F4F
+:1027E000A5DE4079BE92F9D4FB0389FD8C8F977FDB
+:1027F0008786F2F91F6ABDCC01FCBF39E736B60CFB
+:10280000DAA71F4E6332B43FACDE46FB7DF8A34C23
+:1028100015CF7BDD7ECB3E085C2A267C724F3FE9DC
+:10282000AFB08F1E64B91EFBA8B695A29E3DDFFD1A
+:102830007BA4387204F9D803FA5A199778DF3594D3
+:10284000E3B3FB2A166D937AEE23E05B23BF339F3D
+:10285000EDDA48F5F50CE3039B24C6F19D44178E91
+:102860008C0D069E6BBB967BC98F6AAAAF277CBF77
+:102870000EF8367C9CBFF09CEA2CFC65D2059306D2
+:102880009D3F5D24EFFBE1D65AB6F6D2DED75EF867
+:10289000737729DA3DE7BBAF5593B57E6513ACFB83
+:1028A000AC65970DB4F2AD21F2520CDA47633E638A
+:1028B0007BB27BDA51978BBC14186F30F61F52C66F
+:1028C000441C501B82E579C3597DAABC17E774EEFE
+:1028D000C72C01139CE22A463ADB331EBDAC9DEFA8
+:1028E0000D42BFCEB84AC532530F4591AE6AF912B8
+:1028F000D8911DBBBAB07E362CD69143AF54870514
+:102900003F81B23C1AB778F5B15754AA0ED0F82ED1
+:1029100010FEE8A72EC197944FC2A27B480EE86C28
+:102920002EC8FB1BD648EF61BB1A2383A15F9BC84F
+:10293000AB783429AF829767E78A7AE3DFDA6CE70E
+:1029400098C60B49FAEDAD36AB3FC58C63A4DF6C7E
+:10295000F685459F1D79E9F7CB0DEB39A6F1318D51
+:102960007F7489395FD16EFB39E69734BE19A7664B
+:10297000EC332A2F89973F27FD6AC691FF5436B161
+:1029800096C74DF5B9B8FF7258AA47FB08148C26B4
+:1029900051BCC6D786FE34D8FFF3B0FE6F7D9D6074
+:1029A00087DC5C6639FFF85B83FFB819DF370E2FD1
+:1029B000D70A2E7D7801DF0F10BE2B38BEFF06E050
+:1029C000FD59598A73804B08BE9708BEF839C47FF9
+:1029D0003B3C6F9559FCCF6F7ABEC993B513484FF6
+:1029E000DFC03A4E9559F20FCEA3FD7F517B715E49
+:1029F0009A5C7F73B98FC7B1C439F1DBF173BCAC9A
+:102A00005A1CAF3B71AE47E75E8973C4E157044778
+:102A10005AE11FBE1BDB9BE78853CBF36A292FBA11
+:102A200097734C0DEB156B7F95FAB724CDE712F534
+:102A3000F3CBBF556BD8F07335B5EF486A5F23D63B
+:102A4000B7BC7CDC6EC3820FF038A97D5C2EB189E7
+:102A5000B5F673C709B5D673C7D5E513779BE7FFFE
+:102A6000E5881F714EFB3F1D1FC172E16F8AF37233
+:102A7000930E874DD242E5132E3D7861FF16965B8B
+:102A8000E8FFAF30DF8A724BDEC585F68FF3A3D047
+:102A9000FB66FE04E0F7165CC7CDD355C27F72BE5D
+:102AA00084E92746BA5914FD96C92C2AE3B944246F
+:102AB000A0338C83C6F9DAD06A295E17BF1F51B1E3
+:102AC000DB7E3FA27137DA1709FDFD54AD3DCFA182
+:102AD000DC06F78E979F32D7DD546EC967E8EBF1BD
+:102AE000574FB7E3255E16F8597CCB8F87DAEF5F37
+:102AF0004476D33946FCFEC5229A3791DFF1EDDDED
+:102B0000F6FC8E35544EEC5743D27E7DCF06D71758
+:102B1000E50D04974BE4BDB95648BDDCAFB89EE463
+:102B20008279AE0B659B5CA0F23700D741938E048F
+:102B30009FC6E1EC919FB76C37C699FA7A7E8B5CA1
+:102B40007809E9A2EFF1CEEF779878EFED7EC7F53F
+:102B5000AA59FE6E6D5DC1D79F17F3FFCA53E61FDA
+:102B60005DEC3AF87D1157F27D11B6AED62E7FCED0
+:102B70001BBED3A9E5CFF9F5FFB277F9F317943F60
+:102B80004D5E07DD47D1FD2CE57D949BA7F373A92E
+:102B9000387F8AFB28F376A4F6A7FF7E3A8F5F9BE7
+:102BA000F1EEA0EBD40AEB79D70051EF9B1ECF1BBF
+:102BB000F04DC771D772F886A13CC4F31EA6300D44
+:102BC000786AFEBCA1B9085FD37FF2F1981FFCE4DC
+:102BD000CCC47893C578E63C2FCCC9ACB1E635E4DB
+:102BE0009AF34C97CCF8F4B0E988CF0D7C1D72BFF6
+:102BF000D574CF2BEE571BAD24BF9A9DA69FFDE049
+:102C00006E92677139F463A28B056E93FEA3BBAD20
+:102C100071E3B25FECE67A158A788E97E8775F2DDC
+:102C2000F979E7E85768E27993D82F23BE5FE3117B
+:102C3000EE73F5B7F8D1312927E1473F5EA84D4142
+:102C40003C833F5D723EE3009EC2B42F6BECFE8876
+:102C5000A57EFA745B5ED2A9D567CB4B9A3BFDEC9F
+:102C600079497313F43077BACDAE0F674EC038C9C7
+:102C70006047CA7B14BAD8D7447ED74F69BF9A4DF4
+:102C8000BE13E57BB279FD0DBF78BC56C07FE374FF
+:102C9000CBF98579DEC20A0EC530CE63C92FD21CAE
+:102CA000D6B84FF89813C75BBA5D4A993FD3835F94
+:102CB000B68AF1B7C7F7F1E6E93C1EAD63DCF17AFD
+:102CC00073DC6F37D2B8352BF8B8C97C73A788533B
+:102CD000DD99A0E33B691C2D9E6FB30ECB9832E0CB
+:102CE0001E9718DFBCDF1374469EC3739D66435264
+:102CF00051BEEA6B97D1B922AB606C14EC5370F003
+:102D000088ED283ACCF98657F0FD825F4BB19D1FC4
+:102D100024A43118F3C497D1B9F3B51ACF5B9958ED
+:102D2000D5280F5429AFA505F7AD78FEAE265CF681
+:102D3000754B7E26A7CA67E988E7B3B037460E020F
+:102D4000FE16F0E1BD903530CFDBF17C96AAB23BA8
+:102D5000ACF92C91AF97CF62C6FF168700AF967D76
+:102D6000CBAEE078CDAEE0784D9C03333ABF1DCDBD
+:102D70006A665C85F165BCB705AF3BC43DB733B946
+:102D80002C8AE7FF8D53D3298ED79DCDE85C15366D
+:102D900024ABFA5ACC23E13F69A34A298EEB86750E
+:102DA000E13AF05C3676250C2F2FE9174B41CFAF77
+:102DB00066E92CE0C5B8BFB19901DD84F57BE97CFB
+:102DC0006EF88A8FEB70DEA5BA5B4512B8BECE579F
+:102DD00046795CAB03CE3B300EE9979986F1EC2A3D
+:102DE000E7FBFC9CC643789A5DCACB265EDC4C7937
+:102DF000DF8A1725A9BCF6DDC62D072DED5DB1B420
+:102E00004C3C177C69BAC80712F78A98EC253A3807
+:102E1000E37744F11CAA4361071480A35697E9FCA9
+:102E20007DCFF65B5FC1FB634BFD4AC001EB0CAF8E
+:102E30009528FFEB7A1FC7D3670DC6968360C3A69C
+:102E40000D1E41E730677C1E8AC6372FD943717B40
+:102E5000A0970E05F37AD6C90CCFBDCDFCA7398259
+:102E60005E4C3CA62DFB94F07206CFC3112F45D9C2
+:102E70009407350BF0A1FAE89C7F13E2299DD5C792
+:102E800006C0BC0BFD0E16B3C4A161FDB63C3218E2
+:102E90009BF2CE147A63AB27FCA4AF0BF37C34B95E
+:102EA0002A86FB7AA688EF2B940348EFAC94D3A92B
+:102EB00089FFF4243A7527E58725D36932FE4F232D
+:102EC000DE2DF7B9F6282C10437AEB94C9BEE86ED4
+:102ED00055B228EFAAD54179578C45E91ED31ED6A5
+:102EE0003FD082723326D139C175026F26DE19AB0D
+:102EF000DFBC1CE3DCF559018CFF3347FD66CC8F4A
+:102F0000BA3E9A41F9778B583BE541DD801E32CCC1
+:102F10007B23F3B9B0BC9C05E829B102BA5FB2507B
+:102F200097882F7416ABBE0AF017BBDC996DCDAB3A
+:102F3000EA35AF09567ED2721ED1BF42C84B8FEE22
+:102F4000E7799EBAB8F7A3517E507659A9474F2129
+:102F50006FA715EB832B0626CA8AAF9ED1F9747131
+:102F60006448C58444FF470BB55C6C37AE481B8A88
+:102F7000CFBD68E7813E081F1AF508EA83C6424DB7
+:102F8000C5F6C9F2EA78EFF977B1B540775D28AFB9
+:102F9000288FB080F8B0AFF2EF0A2B7AE4DF4DA8AB
+:102FA000B0E4DF1D75F27B65948B3C99F5BC9FB650
+:102FB000F63AAA37EFA725DF4B630FF2322CC86829
+:102FC000198BF777EB69DD26DE93F1C3C4BDB4C579
+:102FD000FE97BBA46BFA206FCD07C6DDE0B3D187A7
+:102FE000C1EF2F57DFDA954379840AE51136E7F10F
+:102FF000FBCB9BB00926028DE4F6E097425F6DC9DA
+:10300000AEF707A07E8B93E7C3B07C9DCD1B9318D2
+:10301000F7CB0AD93C175A8A7400761FD94BA6BD44
+:103020006AB6AB157A6195D00B8F17465612FE1310
+:10303000F9DDABB03FF3C6A20EF3DC8EFFD03990C2
+:10304000693F1C19524FF9346E2DB5BD706B455C4C
+:103050009FDF4AE3B79AFA5CBB0DCBD306F8E623B1
+:103060009FB9C2326B433D36FB6692BB4F61DE288F
+:10307000D83413F5C6F020D8EF860A71DE54978D48
+:10308000E8621D1ACF278D95D4FB51DF6D199CFA8C
+:10309000DEF761B1CEF1C34EC938EE96658C6D1C7A
+:1030A0008BF833288FCD5800B204CAE0EE1FC473EA
+:1030B000190FDA01C5A817797B5F1DB4817D6C17E4
+:1030C000F80F8E06FA41FB6B943D1FC97C9AED9276
+:1030D000F3AD409467E2BA93F3DCCC7CAB2EC5C869
+:1030E0000CA4807F76D91A0FE56BE52EF7A09E6CB5
+:1030F000D6C2345E72DEDB965C3614E14ACE6B33A8
+:10310000F3A6CC7C2973DC7FAAB0E7B5B9FD5C6F70
+:10311000C193F2647E5AA1F2EF5268F6FC3633BFD7
+:1031200006DB537E4D2EE3F935FE7A86FDDC50C674
+:10313000F611917F969C570572E86744573DEC2342
+:1031400046764673B1C81B60DAE665681FE1F96D23
+:1031500020857D050201F5A00BF413D62BF2EA0AB7
+:103160004CE5F9BA76D4B4E2C8CB48972E7F5CCE52
+:103170001E22781372F697580F72F65756397BE66F
+:1031800090F108E66F6E91381D6E01BC3F91823E52
+:103190008E5448828F53D3CF1F04BD361646DEC2ED
+:1031A00079B41C7EBFE342EDCCE6849DC9F1D847DB
+:1031B0007626E0E377840F21A7011FBF473893F1FC
+:1031C000003F9B506E58F24C3FC57EBDE59926F7F7
+:1031D000BFD87BC212C80DFE1D09ED2F0857D5447C
+:1031E00095EB5D218F13F76D2F4E5E773A408E027F
+:1031F0003C681358DBFB2AB99C2B98ACFB2A492F5F
+:10320000F3FBBEDB82FCBE2F8B69A4F78F64EA352B
+:10321000C8A72C7FDC39E66B14F9B47A5D84E4FC32
+:10322000DC73B4DF48ED0B268BF5E6F727FDB14DD7
+:10323000D2EE4B9713E573ADCF53A98DAA447F53BC
+:103240008FD0F712B6E43B54039676CF44FD5BB8BB
+:10325000AE2DF91B69FF5A80E024909BB31CA7EEAA
+:103260001E21513EF0D3523F787AC0634B41D7457F
+:10327000023F60C5523D7B57F35BE31CB595F1B847
+:103280008A884BFCF323D67B4C732B7FB202E3F18D
+:10329000A61EC378C91329E82224C691DDB7DAF443
+:1032A0006472BBD24A7E0F645EA5381F107A6F81AC
+:1032B0009BFB51EC30C067D1AB05934315955C6E19
+:1032C0001992451F9AFA8F6A2CEFDD7E7EFF847576
+:1032D000DAC731D7B942D0A9392FD0EBFC4A1EBF8B
+:1032E000585069A95F20331EEFE8B0E30BE0594462
+:1032F000F03076A217781E49094F971D9E1571BAB6
+:10330000D556E078A09757E2736B08E82E057EC784
+:103310004C08DD84F50A33B68EC83BABDD5A8FEB23
+:1033200030CB16BBF5B64ABB3CBDBD92CBD3359571
+:10333000244752CFDB50C9E5629F7D3FE03CF9FD59
+:103340002EFC3505DFB4743F99710DB09ADB6DDC4E
+:103350004EFC5930EE1CFCC5F9F9C661F5A4E79E98
+:103360001376C8734EA6607E0DF0582055DE4FAC24
+:10337000D2B43BA243102FCFF46277C4DBF5925F47
+:103380007F25DB997131F647CB942319647F9C6EBE
+:10339000CB403DFFCC89504AFBE3B9DC9D4352D979
+:1033A0001FFB7AB13F9EAE14F6C7072EB2274A3EE6
+:1033B000E4F647C9873B65B423FEBD52A5F5149FCB
+:1033C000E8907580BB04ED0F18679FB03FB03DD902
+:1033D0001FA777CA0857F1871DD4AF04CA687F14A6
+:1033E000F7627F001432E2E1E992963771FF92D7DB
+:1033F0005B355EFF85956E8BBA3B28CE63F66BC955
+:10340000DF98A1D37EDBE9675A3197BB897E9CDECA
+:1034100093DBF546676572D5D66E58D73696B99365
+:10342000F23295FA87B16C180AE56BE10736906EB7
+:10343000EE9C0D306463BBFA47BB51BF186E1F7E14
+:10344000DFE0B3F4A5DCDF59C37CCEC90979444B76
+:1034500007D08C9018CFE5F13581BDF4A38C2CC238
+:10346000E35A9F19D7D9593102FADF79E548BAFFF3
+:1034700013BA170682F2E44E99EACD38D02B83199D
+:10348000E5E903FFCEAA86F1278AF141DF69B74358
+:10349000FB05C21E2B97BDD4FEAE7CDE7EB271AAA8
+:1034A0000ECBC5DD2E15EF993179837C0BC66FD11C
+:1034B0002E81F6773D1B29F3407DFA118004C77BEE
+:1034C000D745710C0DFE21FF4EE86C277C669C7081
+:1034D000D9E21BE920E16216FBC5955466F2927EA3
+:1034E000A9E493F9EC110F9A21E211D7B0BFFB0ABE
+:1034F000ECAD336CC3565CA37B54E8C5DDAC677F91
+:1035000033DEF0FBF19A7706ECE348A74EFECBBE24
+:103510000AC035ECD3BED6D699D720DE772A14DF81
+:103520003DBA3E83F669FFBDCA2E8C2B1D053EE5D4
+:10353000F1F3B52B915EF7679A6516C3F8DCFEF8D8
+:10354000F70A07F07A515667043E40DF78FF40D112
+:10355000DE68E5F56699DDB512F337F60FE6E51995
+:10356000337EBA07DB63C637F9D76B8F7B53C9CF7E
+:10357000513355DB3D8F5945B7723A3E473F90F77F
+:10358000D7CC18D8B35F5A35F7B3F62F0110C7223E
+:103590009EF4C21930FEBEAEDBB68E81A9C64F596D
+:1035A000DF41727440F79A54723F3483DBCBB1929F
+:1035B00028F95DE0CB73BF972907318F751653C784
+:1035C000A17FBF63EA33FF710DCCF36AF1A871727A
+:1035D0000ABEBE61C688A475BD2E2F47B9F4D1FBC3
+:1035E000F353C981E64ABDC2BE1E7E4EDAB45321F2
+:1035F000FCD7FDC7278F60FE43AC6427C5F1F6FDFD
+:10360000C1C1D06FD93786DBFF78534FCEE913F8AD
+:103610005A27A6A03B806F492AF846CF643C4F74D6
+:10362000BCB614EB93E15531DE0DF08299154039AB
+:1036300092F6DBEF77605C735FB783822B674EB4E3
+:10364000C948822D5D234AD16C9D56754C46922AFD
+:10365000F1DDBB198F80F50DB28DFF2676A5DBCA93
+:1036600037D40FB09517D70D49F023C3FB4057D877
+:10367000CA6EFFD5B6729015DACAF3AB26DBC62B3D
+:10368000F3856DE5E9FE99B6F695EA3C5B7966FE51
+:10369000625BFBEA40ADAD3E523056C1AB7C409719
+:1036A000CD88AF8C4E8DF87C4BD76D3EA48B58499E
+:1036B00084FCEA23991DB918B77EA597EFCB75CC8A
+:1036C00090857E07D308E524E8F38DD989F6C111EA
+:1036D000DDB6B8FCCF67707DFD84A0EF73DF87E3B4
+:1036E000FAF97CEFC125EBE1D957DD4672A965BE39
+:1036F0001CC57B554DF96F78F1FED82BF3793CA1B1
+:103700002517D6E9A5BC0CE2AF17175C3714CFD745
+:10371000D2F3F50128FF4DFD1DCE8FB2E3509FEE91
+:103720008BB22BF09E19946BC57DB370017F3F5A0D
+:10373000BC5F854FD0DBE5167C25EBE3A067EC4B47
+:10374000E036B0A97FF2D177FCE617F0B84FE9E98F
+:103750006829DEAB9EA9BD70905F9FE6F2E7D59227
+:10376000DFE5F4A2B7FFDDCE0FAF133FEC3B31F73F
+:10377000ACF2FF370D3CCEFE548387C5607DEF363B
+:10378000F8E8F99F0D7E7AFF7A834ACFE6867C7A45
+:10379000C61A0254FF6643113D0F3668F47CB9A186
+:1037A000829E871A22D4EE570D35F43CDCA0D3FB61
+:1037B000F76770BEBC54E0D1F2CDB842E44587440F
+:1037C000789D8F29BB933ED464AB7C07BCFE76C644
+:1037D000849E78BD583D122B691F12E17A2B251F5C
+:1037E00039679AF76EB99D3C4B27991F87CF857132
+:1037F000BA9C449CCE8D264D7F82F32F7D09E77EB7
+:1038000011C7D99FCD6A9EE0FED42689F48D6F2C16
+:1038100097E7F7474224CF078E4D2DCFF37AC8F3B1
+:1038200065A4B7D8218C9F627A110AE395387FEAA4
+:10383000B888D12FEFAC78A0734B130F96FD1A3ECA
+:1038400033051F9C0B0FC9EB9F56AC8D9E3981DF52
+:103850004771F6EFA94746777FA1616CEAE9020E4E
+:10386000EF8EF7E7F6437BC58D4129F2DFC1702B60
+:10387000C2FD66665EC19EBADC9EE3FCA6A49DF412
+:10388000FA5D713BE701B26392DBC1CF41C203EA4B
+:103890002D0B1E52C881693353D04199FC6CF746F9
+:1038A000E8BFBF9B51DC4C459B1AE07F46E1DF6BD4
+:1038B000D8FFA183F07CC623917C74AFBBDD83313C
+:1038C000EEA7BFC7DB19D512DD63C838B04F453B43
+:1038D00035D8AD0FC0EF8E15C52A9DF89DD0D09478
+:1038E000B181340B1D8414BB9E444B35AE77282820
+:1038F000D63FA97C79A2BD8CFB3F2251CEA3FBD73A
+:103900008B705D734FD533B540C459BD29F1B45A9E
+:10391000B2C4DD1416D83A318FECCE8397E3F9CDDB
+:1039200028169589AE0CF2BF4D78656F84EEE79945
+:103930007EFAE792B60AE7EB317E9D46E76FCCE16F
+:10394000A0F3B7F585FA2D33E99C3EE97CC6F7F282
+:103950009F25D0695B1D2C86F68591E522FC25EF1D
+:10396000D7B8A2CADBB1BFFF6BFBF53B25EBF70273
+:1039700046ABD3C89F3A03FE14DE476952F83D298F
+:10398000E3DDCCE81E0292E5A3DD76A77C7500F7A7
+:10399000FF4719FF48FED15A5824FA5FDB851CBE49
+:1039A00007E5303CB73BB9BFD5DCE8F6B5E5A0BFCD
+:1039B00095653840717D96362CCA609DAD33B93E11
+:1039C00077B31BFA45C69C057EE19F38E3FB9EEB6F
+:1039D000237F4394BD2EDDF109FA7547E428C6DD47
+:1039E000B68D7DB06639E26FAC879F7F2A31750E48
+:1039F0001A683E83E558EEF1CB4C398971DAAD6037
+:103A0000CCE039EFDDE21E6E66C061B377FA15D9FE
+:103A1000EDB59FF411DC2E9444E8B7E6B8A2988F78
+:103A2000A3A2DC02B8B7FA1DC45F9B542E1F3679DF
+:103A3000358F2FC5FE6E417CBB7B9F5FCEDBE4C321
+:103A4000B8F74EAF83F877ABAA6CCB83F2562F371B
+:103A50006A9B544745AAFCAEEE99DCBE8226699467
+:103A60000F159C4BF64E6FF3B4887D37CBE905BA42
+:103A7000467CA60622B89E266F8E84FB62D6EF9FF8
+:103A800029097DC5E3CADB84FD949EDF1EC3B84EC1
+:103A9000F3E05585882E0FD84327E1BDA7A09DEC04
+:103AA00027EFE52E3D15BC27C478DB9C810AC4E7CF
+:103AB000B64C0733007FDBF27A39DF12FAB2491DC8
+:103AC0001721FA067C8C927AB67B5EECF366E74EA1
+:103AD0003FDE5BDB366A21E5856D1BCAE5F3EAC391
+:103AE000BFDED388FE83FA5DF609F24D8E42FBA657
+:103AF000B28007F55CB34FF1615C607CCE1D9EA087
+:103B000045CE25F38973F0DC1ABC4F78A6283D809A
+:103B1000482F930FD377459A032077F3306FA9DEB0
+:103B200067FD5E00D8DD9F21FF9F8B4E55A67B1061
+:103B3000BF303ED1516FFB970C8F1725D3B8B3B46C
+:103B4000CFD66B527DC7645415C7AB4937CE73D0FF
+:103B5000CDB9E0B7E9C5DC845E1C5875D92A3C7F35
+:103B6000BE9BF1FACB0EFF8EFCF4E4F2D7E5CF2634
+:103B70006527C9EDA6912EA2A7E4FEDBF2383CEF43
+:103B8000CC3C29E20431E2DF6C0F8F37DD53D43FA8
+:103B90002D955C2E1BAF8FA9B2D81BD9A5EDA46FB4
+:103BA0005D558CC76BD5886F248CE3ED94814601FD
+:103BB000DF8E2FFE744CBD783C2A3BEB5904C6CBFC
+:103BC000EA94893EF1E70B9083FD841CDC32FC8F84
+:103BD0000CF347765CA10478DECA4781B3E993AC65
+:103BE00029F678D285C68BAAAA441E431A4BE379DC
+:103BF00043552185F2751C5CCF6AF0DF2021222419
+:103C0000B1FF83C451948AAF789C2C670923B919FA
+:103C1000CF5FC1EFCFE0383A237B042FD062BBCB1C
+:103C200057737B2B97754B781E381CB37864A47739
+:103C30002E3FCFB05C07E5EFC034987F22190ED23B
+:103C40008B3F1C7E540AC2DB7B8A578D457C24AF98
+:103C5000636595887BC5D771763C9870F6359D9ADB
+:103C6000FABBC9C3F5B1068A3B0D8DE5A4F8679987
+:103C7000BC81EB63C3ED437DDDA4D43F8E65E81DBD
+:103C8000A1786952FCF3B3341E1F95EE603EA998EB
+:103C9000E29FF9B84F6B597A00E393FD14DD83F589
+:103CA000192315FABB0C60774FC4F396845FAE7A84
+:103CB00079BEDC5ACA2B7C1EF51AB43BF0C5D9E597
+:103CC000D193E7D06B2D9D23BD145FF7D466A03F41
+:103CD000FE947FC461F46FCE7878BE97D9EE40D25F
+:103CE000F74F9A859C3B5C25E2E8699FC9D87F9A8B
+:103CF0005F5530AF2EE4194BF2BD494A7D5ED05975
+:103D0000C5F5C168F5354E67ABCDEF96AD26F9FF29
+:103D10004EA6A0DF3A7D31C59585BDC7344DF55D12
+:103D20009BB0F34C7DE9577CC6CD388EC8B7EAB15D
+:103D3000CE033731FC1E0BF35BE2B32370FE7EF142
+:103D40003C3BE2E724FBAE377CB608FFB8C91FA2B4
+:103D50003C8D3328B3529C9F984FB0530FA29C9A2E
+:103D6000D061972F19F976F9B2D5514F795FC6D541
+:103D7000CC877921AC2AE0B7DAC960AFFEB28ACE2F
+:103D800077ED76E74DD58C7F673B5B55304E13F66C
+:103D900004199E4B28B93AC3FD70F90367DD8FB64D
+:103DA0002AAEF79BF39747D0AFD931F53B8497F113
+:103DB000153C0FD56C07FAF29D2A8B7F63E6299C90
+:103DC000F7F7947C0ECA5F3CDF3852CB9495FC7BAE
+:103DD0004AFEE5F43DA5A73CFC7B4A0732F50CB44E
+:103DE000BF2EF47B4ACBAB39BD863CDF7E71DA084F
+:103DF0000B9EBA74CA1F71F94FD1F9CD34916F92ED
+:103E00001C2F72BBEBE9BC2D5652BFD81A2F36F1CE
+:103E1000D726F4F66F4A74CA0BEAEDEF4198ED101D
+:103E200063B82EB788876E29594FF89F5B914DF183
+:103E30002845C4A35CA774CA038E8ED733AA2DF875
+:103E400077E71AA4EF32FE91F1FBEE9FF3FBEE1938
+:103E50001B5908EFB787BE1847E754A1581AF1D984
+:103E6000D4D301FA5E7599FCD8D611507FA053A126
+:103E7000EFC81F989A9E837AEDD34E6EDF661CB80A
+:103E8000EAF0DF41B9A4B316630220770096FE3D45
+:103E9000D731F5B4E36BF99913D0CFB49C9798E37D
+:103EA000FEBCE110D1C7930D1DF4DCD710A3674B06
+:103EB00043173D8B142D8CEB29EAA0B34B36E90454
+:103EC000D45BE0287A17FA5BE8C1375E1F5F4DFCD0
+:103ED000D7616B9791DF656B077E6E11B653FC1C43
+:103EE0009F2EFCCE188C3FBB8B6D96D4FF51F26A8F
+:103EF0005175DFC8AB1BAB079E4D5EF1F3D45097F5
+:103F0000F8AE58123FFE5795CABF8F64F2A53857D6
+:103F100035F5F456FC15F46953D677B87C8BE76F0A
+:103F2000F0FB8AE677E9EF78E5E45ECCEB697E5B4F
+:103F3000D41B9FEFC5F3DCC4DFCDF8E32ABC77F2D6
+:103F4000023AB76087BEFBCAB3ABF0FB410B6BB262
+:103F5000150DE00BE3016C76E2BE8C99D7988CB717
+:103F6000DF543BCCEFD0511CBE7904FFFB06C9EDFA
+:103F70005EAC167E9B6AFFBB1FE9BDDC137AAE9A6E
+:103F8000CB8B5F0ABC6D75F13C85DEEE837CBFFA9E
+:103F9000ECF741DE14F5E7BAFFF113D1EE0931EF8A
+:103FA000B04991FB51FE987F97E349F13EFEF73807
+:103FB000FC2CE5386D42EE5E3ECB27F653A3EF9F17
+:103FC000C1788F107D88BF9F60D64FFA305EFF4F5B
+:103FD000541FFF3B093AC589CCFB786DD51D7B1B6F
+:103FE0002DDFFF6A8E7F5791E739FD51E02DF9698A
+:103FF000DE47897F3F8A1DDEAB59BE1FF540F59B2A
+:1040000027C5F7AD9EA6F58A7B38DB70BD03E9FDB9
+:104010007E7A9FF43D81A75E39B8577C47F179825B
+:10402000BB3EF93B5DEFEEB57E1F615BF53BAB44FC
+:10403000FB97683CF15DAF147421E8F6E85EBC1FA5
+:104040007A1EE3BD46E389EF72ADABE67CD41B3D3F
+:1040500043FB23046FFC7BC5B51ED42B897BFF4734
+:10406000083FE781AFA334AF6ECECBF125BB39BF9C
+:1040700098F964265DB0597C3F3656C7F3744F12E9
+:104080001C2BFA0C0FA7089EA47B48E75AC7E385B0
+:1040900091CF080E7F3C1FF94F34CED784C7BC3F69
+:1040A00096CC1FFD6649661EB46B16CE931BFF6E41
+:1040B000A77B561FCC0BE366D33889EF81F69F951B
+:1040C0005AFE5CD0B84C3DBFFC12B3FCFF0015C8D3
+:1040D0004EA0007100000000000000000000000081
+:1040E0001F8B080000000000000BF3176060F85100
+:1040F0008FC09C687C5AE3BF4C0C0CFACC0C0C971C
+:10410000D818189C39191884F8C833E7229ABE7B4E
+:1041100040B366F030302C636560D809C47A5CD84F
+:10412000F5D90822D847817E5F01C417E91C06A390
+:1041300078F0E01A11068649A208BE9E18AA7CAD46
+:104140000882AD2345995D4E40FD008850BECB806E
+:1041500003000000000000001F8B080000000000AA
+:10416000000BD57D0D7854D5B5E83A3367CEFC26E3
+:104170003949069884104F42C0A84007080A1675AE
+:1041800012C146E5B663DA6A6CA91DAC527F61B410
+:1041900056B956CC4908C92484101015A9CAE02F75
+:1041A0005A6D53456B9FE5DE09508ABDBE277AD50F
+:1041B000AAD5DE5829AD566DBC9692BE8770F75AC7
+:1041C0007B9FCC39273393A14ADB875FBBB3CFFEFC
+:1041D0005B7BFDEDB5D75E7B8FE27041F509004753
+:1041E000F1DF5900F7FB01605C3A9DF9BD2F5FFDDF
+:1041F000781DFBDBEF0E3FC89299BF985F119B962D
+:10420000AE3F0724AAD7F08BC57F0456EFDFC1A9C4
+:10421000B9D9A79D0543FE30CBEB9213B09D1BEAA5
+:104220004BFF25C8CA871DE16E964F1D760480F5A9
+:1042300033039CD80968A006A2D3D977F9CB45608F
+:10424000EADF9E9EB949865429C0AE95204759BDE4
+:10425000D505A72D1E0C00BCD092FACBFE290091EB
+:10426000D449B2C6FAD9DDB297F2FFD6B2EF2FFB2E
+:104270005D003128A6711AE67F242F61ED76B9A082
+:10428000B99FB56B8848AE25A6F162623EBBBCA261
+:104290005CAD97339617B072F6BD217841C6F2181F
+:1042A0009B11D52B16FD0C0F3AB19E06437E9AE763
+:1042B000E1A68CF39C20DA19F9BA413EDF9D6F1D0F
+:1042C0003A1FE99082A2A81BD3C3D56F22BE073C38
+:1042D0009206550CBF83E7117E53885FD6C5A1B700
+:1042E00039BE777DE208B7327C3778D44098E54113
+:1042F00066F460E50D0188105C324B191CE70BB8C1
+:104300002F166913A644178DE832E06174098C0DED
+:10431000EF599B1482D798E700CE338F76065DD98C
+:10432000D740B480B583CC7C301A3F6CBCD9C70E63
+:10433000A781D7E8FC81BFECF700FD3BCAFEB75070
+:104340007DEE2FFB6BD3F9B386F759F28CA3C173C3
+:104350002A8317FFD43095FF3C689457F1721C27CD
+:10436000D1A2FDB986F15F5F0BFCB986F15F6F8B5F
+:1043700087F23D2D2AE5BB5B42944FC8AC09A3638D
+:10438000A207923A6B5F1C61F54DE315CD65ED4CCC
+:10439000F01584554BDE5F1BB2D4F76A9AA53CA199
+:1043A0005DEF4832BA774D73249D12C2C164E44474
+:1043B00084C3432903F7D5109B4F0D6F026B5DDA61
+:1043C000AFAA119E179DD0C6F2855AC47129CB574A
+:1043D000869C900CB3F10B8700587F8995001B5881
+:1043E0007F3D334F755CCAF2DDF3DCAA530548B25A
+:1043F000FE136ED6CF9194B60AFB99AE84B11FE836
+:10440000937F8B78F2B0FF8E56034CD694B71D8500
+:1044100000553AFB6E9E9F5B0FA15C17CDB57E9F4A
+:10442000AC2DBD1658FDC960FA5E95A6A731AE91B8
+:10443000B78F671FE78415B6FE6DFD566A83F5EAF0
+:10444000B474BF27C050AB1AF867EE37D220219D55
+:10445000C2A025671E3FB8032B3E2EDE3F3B8DE7F3
+:104460001E17D78376791B0407E90F90C74184C1D3
+:10447000A5698E6437EBA7BBCA41FCA3AD8624EACD
+:10448000ADB593F6C531DF5DA5686D2C5F55BBA753
+:10449000599A01B066924A7CD7BDC30D6D610E4733
+:1044A00090F169A5C1A74706EBAB910F25086F6096
+:1044B000E555DA8156ACAFBEEAD35C7347CF0F56F1
+:1044C000F0F9539ECD7F08FF9833BADF5FCE5122BB
+:1044D00051E45B1D926E064F574D5BA3CEC6B95794
+:1044E0009701E5A77B65FF6B88E7C4140EAF7DDEFF
+:1044F000959AB204F91ACCE3B3F12A6B2EBC1AE7F1
+:104500006587C3D017DF6F51491EEF6AA9A5F4DE96
+:1045100016B51FF5C45D9F3833E2F77C89EBE7CD14
+:10452000AEA803E1D3E739920F92FE896DBE92E502
+:10453000EFF9EEF859B80E5C3FCF41FAE5CF3D1CDC
+:10454000DFF7487D1703D55734AA6F93FF7BE54803
+:10455000DBB758FD7B42A5A03379AE74ED3BF74441
+:10456000EC6F45F54C9DF577CF0D1BDEC6F695F348
+:10457000A66A4ED67EF2DC036FB2451CEE3A3218C4
+:104580008A0630CFE5BA72C5F8FE1AC62713B5BE43
+:10459000EB70FCCAB98A96AC4AF3650584699C1332
+:1045A0009AFD9052C7E6CF8A6B72F3E7F1D3037F8F
+:1045B0001FB92A47B92A4DC3BD59D82776BA2F92B9
+:1045C0001CC42F23723597CBD513A7733A1B727572
+:1045D000D7A4BE778B58BEF71B9C4FED7C5E35F79A
+:1045E000403DD2B587C94F4908A0CCAD7D2CB17CE8
+:1045F000EF122187730F484B59FB3FBDE2D300E513
+:104600006971667D9D8D9FD3A975DC7B6F70344485
+:1046100059BD5F5E3EF58F6E1C6FB1A2A19CF5CABD
+:10462000B534BEF65D45D34DF4AC5CCCE489F157AE
+:10463000E50D427E6C7235D6F8899624BCC3E468D9
+:104640007D4B08228C6EEB5A3492AFB542CED01619
+:10465000853296177206B5B3289FCDFE046825B93A
+:10466000F368298831FAAC677D43397E4F4522F3E0
+:10467000014A50579D4EE0A41C6C6D5F37520E11DD
+:10468000C6F4D02B89BCFE473DC2C653C33CFF6C69
+:10469000EB1FF5554C08D77B797E87545BAFCF373E
+:1046A000B7DF43FD1BF5593ED55063EA0FFB9F660C
+:1046B00086C7518FF58DFE5E6F2DAFD7D9F8EB44CD
+:1046C0005E692BE6F9E3DC7F8FD41F624C0F6B6CC5
+:1046D000FDF448024FFA7F442281F438774AEF46CE
+:1046E000744BF91F228827A3FC07ADFFA1EBACFE9A
+:1046F0004710BD4B627498B520560E8CEEFEC61462
+:10470000A029B5DE86EFF4FC5EA4F905A6F1FC7DD8
+:10471000AD9F4410DF46F9D352412BE21BF92630FE
+:104720001E20444202B0E9E73D573E8F7FD79600F6
+:10473000CC63E3687DA0B13E1C357109F71DA1C5AE
+:10474000F2018B3C08BE63F03D2EB174D6FCD8D785
+:104750007029CC009F6E86CF187F2C780D38B2F36D
+:10476000271FDFCE470DE7CC7D613E932FFF3E57DD
+:10477000D8ADE13C5409F5780902C5F45AF1915DD0
+:10478000442790FB436847DBFB2D59500E49D33C2F
+:104790003F6B7ADE85798EB797CD7465F957CD7802
+:1047A0007C1CEBCD19CD77C6FCBC383F403B98CD87
+:1047B000AFCE3CBF279B717ED9F0669FDF3A6F5F1B
+:1047C000733483FE3DD321F6BB67CEFD12F6CFC610
+:1047D00003D45F5E6D88F4AF8AE3B1AD66D1915DBD
+:1047E000CDB8B5CD369E3A9F8D577BFCF039161F5C
+:1047F0000798FED2583D4738371FDBE5D998B71FD9
+:10480000E72D211FF1FD807DDE008C8F0AFEFF9DCC
+:10481000F7C732A7E70DAC7F9DCF8BCBC73F685E54
+:104820001F3F5F4AF28AF038393F8732F1D73B9217
+:1048300066D9E7DAF93ADBBCFE517C3A7A5EB9F127
+:104840007CBCF550BEFAB5ED551FE1B1F732BE4F55
+:10485000E8DDBB90FC0EBDCF9F3D01E1284C9C02E2
+:104860001166FF4EC5FE597FBD867DB1A96E8CFED7
+:10487000B97D71670BF4B74F0178AA7090F6C30C3D
+:104880004E6ABF99D99F49A6E0EA5EBCC1BB848D40
+:10489000B7F98A0D5EF42BF50A7BB1EEC507D69FFA
+:1048A000C3F039E1F292994EC60ABD5EE3FBF6E72A
+:1048B000A6B2EF9B2E13DF85FF8A7D7F11EB874425
+:1048C000FD6C70952983B128C90B83CB847FA3FC31
+:1048D0004907B74B9F403BEB44DCCF703BABCCD799
+:1048E000B704E95BB859D1EE9346F7FBBF853EBDEF
+:1048F00013ED3436DFBB2EEF2847BB6AE7D653777C
+:104900000510AECB80F4F989C987065C1A8EAF4BCF
+:1049100088E7275C60D859B4CE975F66D0B5493A2E
+:10492000BB86DA093B8BE7BF3FB2AE7E9DEC968A31
+:1049300018CF3FDDF6DDFA55B2A95CFF767DA422E3
+:104940005DFE42DBB5F5B8EECEF2C4DE98CF483757
+:104950008BE9BD550C8E59B2E68C23BF6C0A66B448
+:1049600017B73DE7694E32FC6EDB3A75F2E519D6B2
+:10497000114645A2B3919FBDD72A674F20FEDC8820
+:10498000476EB7F630F462FD504C5B85F89CBD175E
+:10499000C2B81FCDA6EFB2D13174B755DFCD92ADFD
+:1049A000F33A5EF3F90854BEDF16FDB375FD250733
+:1049B0009F8F13E568B6CCE5FFD3CE278578E276E6
+:1049C000C46F32F5FFF79AEFAC001B27F8D98F13AD
+:1049D000B28D93AD5FBBBED21B4092D11F5F0E6103
+:1049E00084A778411CD08FEF0CEC0BE9CCDE93D57B
+:1049F000414A5DC1A190CEF4AE12D2CA307557843F
+:104A0000CBF03BDB1F09F9E86C25BD3A92EF6A4514
+:104A10003DBA0EF3247F6BA87CC3487E2DE56F9BC7
+:104A2000C4E5F304E7ED03A887AB51D930B8D60E3F
+:104A3000BCDE8C7E80D2DD81309A1AA58130A01E2A
+:104A400036CA7B07DE0D79D08EDB1D002FE3F7120F
+:104A50003502E6F6EB06FE1A525979409407825168
+:104A60004BF9868193CA420C453E51EE0BC5A8FC1A
+:104A7000B68179651ADA31BB032A7EF757C469DC3F
+:104A8000B37F718D83FCB18B1C49B7495F2516CD6F
+:104A900022FDBE588A9DE464F4A8FF458F07ED8788
+:104AA000C4EE6913F03BD93CE44F92FF2FEE47313F
+:104AB0007B94ECA0807AE014412F679A1E3D785ECB
+:104AC000417E607E4E9110E7147A432A85E3EB85A0
+:104AD0009C4E8CA3D3FE676ABF37EDAFA6FC3E4B5E
+:104AE000BE404D46701F2D07997E60EDFD113D8241
+:104AF00074572A78DE1908A7507F6CFA0684116C67
+:104B000099E113EBAF9BC7F21AD23F4AEDBBE6F037
+:104B1000BC128AE9984FCCE47977453C85F9352772
+:104B2000F1FC2683CEF088950FE04F44F7AE91BCA0
+:104B3000B70DCB1306DF80BF0DCBD79CC1F56CB989
+:104B40005CBF13F1BF69A0AB6C29EBBF08F981F51D
+:104B50005FB4384CF432E872A7E6A0F5D6A0CB9D3E
+:104B6000DA2C3A279859C4304113D2881E334FB8F3
+:104B7000DEA1E279C7298EE483129E4FF5780759AA
+:104B8000BD4DB5B3A8BC52760AFF00F7873F28FC9D
+:104B900001D5CCBA40BBE341B15EEFBC7D6A11B632
+:104BA000DBB9F97F11BDCF741653BB35B5FCFCE6FC
+:104BB00019B64EA39FEEE9160FA53F62FDC598BE3C
+:104BC0007EBCC543E90F5A544A1F617A1CD31E5656
+:104BD0009E42BF032B4FB17CFFA0A311E5FFF61649
+:104BE000669AB1F6B7B5783E96A7A0BF42A5FCBAC3
+:104BF0009610E5BFED685AE1E4FE14FF3436AFA726
+:104C00005EAA21FF5EF875473489F356A174515DA1
+:104C1000FABB819F6F3B1A5622BFFE7050A67140AF
+:104C20001EEC3E2573BD36AC37E37599F7171CDCD7
+:104C3000707E3063BD4EACF7D87E0E377852BE2CF6
+:104C4000FDF520BCD3DE12F085522559FA5B8FF5B5
+:104C50001EDD2FE00B24BB4FCE5CEF0E1CF7E4B73C
+:104C6000047C15C90DE7651EF7FBD89FA784DB2BD5
+:104C70009F437F461DAD035B25933C6F5CA24B0EAB
+:104C800046674FE9601CEB4DAF8B4BD56CFCE025C4
+:104C900071C9319DDB190E96F7623F2C3DA59695A3
+:104CA000B37A1BB1BCC0548EED597AD2345E1EFC6F
+:104CB000A6B57C446F378361A7A6D0D91AFA8A3586
+:104CC0003FD5C1F5E3B3CEDFD623BF4F5578F97F8B
+:104CD000631EEDAE45B6FA3E9EFFAD51BF90B7776D
+:104CE000C83CEF29E1F32EDCEC49A2DDB57E61473B
+:104CF000E8D2407ABEC5E7246A316FCC6FFD399B9C
+:104D000043979AE653FC85BB6B2F9D967D5DF16AB8
+:104D10000E8898D6DDA97DD32052FACFAF5FBE6A48
+:104D20005A37705D9920D6850973F9BAC2F0A67317
+:104D30007B95E36DDD1956BC159D69C5DBBA33ADB6
+:104D4000782B3A2B37DE7E29C6CF863F367EC43C91
+:104D5000FE8673ADE3979C671D7FC379D6F14BCE7A
+:104D6000FFD4E3A7CC7CD3576F1D5F6DB08EDFD728
+:104D7000601D5F3DFBD38D6FD0A76BE02EEBBA5E5D
+:104D8000170533FD12035D21CBBA1EE6EBBA51BE07
+:104D900066E0A7215CDFBDB8BEA37FA696AFEF3368
+:104DA000DFF928847EFB7567EC09E13E631DABBB30
+:104DB0006F5A7ADDD879C68D8E4759BFDF3989AFF2
+:104DC0003303673CED41FDBFA696AF3309719EDB0F
+:104DD000DD923A788D2B3DAF828497F67B467EC478
+:104DE0005E82DFD5231F266A1DC25E2A6B8B305B75
+:104DF000D473926CC9774DE3E537B797B5E9E84BC3
+:104E000091F5325C87FCB5F0E76919F65BC6F806E8
+:104E10003CD9C7E7FBE2F4F8936DE34FB68C6FE43F
+:104E2000BDD379B92ED734203C9BC4BEF906F9779F
+:104E3000A45F8E1F7CD3DB223566F8783E0D1FCF32
+:104E40001BF0DD2ACF68D06BFE9EF09D66C3DF6944
+:104E500036FC9D66C1DF0A79EE31E1CF5EAFC7C691
+:104E60009F5743E426791CCA1190BD199755711EAE
+:104E7000C4FBAB93857CE1F818B7B344494EA9E273
+:104E8000E54D6C5D5B2C8B7D98A8DF68CB1BF62B0A
+:104E90002E4747C90F93D97E5580EB6D6677841FE7
+:104EA00024BD1E26794AEF3BB81F4396A39168069E
+:104EB0007D7087CCCF872535DC8C70CA0185FCA836
+:104EC000D9EAF7C992B0AF75CBF94E110CA59C0881
+:104ED0004708283E090E7F59BB60FA683814391A12
+:104EE000C3719CAA02F7B171DA8B2FD4CC714C8FAD
+:104EF00018F08422048FA2727814391CC9E407BE0A
+:104F00004FE67E0BA31F06A1683F0468271AF0AD89
+:104F1000F6469B97A03D5FAC109EDA0BACE7E5BF71
+:104F200011F37A41A4ED59CEFD00A331307E69FC26
+:104F30005CB24357CD6DF0205F6A10F6A0BFBE3D56
+:104F400090399EC848ED766782D9A598EF6076299A
+:104F5000A6ED81271A71DD39887C9CE15C7B44CF0A
+:104F6000851D9032ED3FFDB53E4859FCA74982D3DF
+:104F7000AB9558BEBB43E59676AEF132D9F3ED0161
+:104F80004712438DC682BF43C06FD4EB94E31E35F6
+:104F90008FFDB23B6485F7F8E18FB7F7BBFAD54CCC
+:104FA000707D567833F8CADEBF52AAC4C92E96A3C4
+:104FB0002133FF3B5D9C4F95524F9CDBEBD9CA7D63
+:104FC000BC7D8095A35D1C886A78FEC2449EE2C4C5
+:104FD0003C280726FC4C14EDDA5DE23C1AE2E4AF13
+:104FE00095B47833F291A742A1F3017B3B23F58975
+:104FF000F69D9F7CE735928F711E920F4963F29365
+:10500000619CC7E4C878174B37C9910998BA8E38A4
+:105010006399E4649C8BCBB1271AD53C3CD4242300
+:10502000FCB345BF7D06FC7A9CCEBDF285BF3A4FEE
+:10503000F867A7E19FE19A43F07F0ED36CF04F171A
+:10504000F094427800F7EDC8A0D82FC0059AF95C1B
+:10505000AE57F45B2AE003B88EE8669477093CE427
+:105060003B9FF979CEA7373D9F46319F7373CDE7BC
+:105070000B623EBD2EBE5E791AA35A88F1554916C1
+:10508000BA2C15FD6F1EA1CB75C7C4575FCD731E1B
+:105090004BD3F35822F8EAD25CF3880978FA9C30B3
+:1050A0006F3FC6CF4C16EB0D3459E8B2C5E02B3735
+:1050B0005F3700AEB7D0E576D14FBEF3599EE77C9F
+:1050C000B6A4E7F33D41975B72CDC754BF55D46F8B
+:1050D00013724576CB16D78E36B43F1E93A31DAE02
+:1050E00039E9F158BD4E73BD89ABBB8D7A6BF0BB0E
+:1050F000B468A45E8F185FD845F7D37E6C35DA1894
+:10510000CCBEF9E2EA171AD01E67ED3650FF51BE49
+:105110006EB276B799FB9FBDFA8E3651EF4EACD783
+:105120007AF611A3FF4DE6FEB7B852061C77131CA2
+:105130008D23FDDD63AEB7D4D5DFC6CF092BD403F5
+:105140007E935D13CAEFDCC7158C2506D15F090578
+:105150007D687774C8F12D83C80FCCC87B907DBF64
+:10516000C91D9124B67EAA91F8C358AF4477AB4EBF
+:10517000A45B43FC4798D71D10C5B8C83BFDB76E6C
+:10518000C1FC0AD9A3BAC3686F697434D41B9429CB
+:105190009E67B514D3715D3C24C79E7191DDC3BA7F
+:1051A00064E3DC54AA25BB25F4DF82C4ED0E0ED7E0
+:1051B0007AFF250984C3CDE0C2F8E0D536B8D878A7
+:1051C000B42FEF1AC7E36D40865A19FB73FAC2D8A1
+:1051D000DFC0B81B09DE44AB5BC5F689293712BCBA
+:1051E000AC2C4AF179AE38C1DBE9F2A8188F77A769
+:1051F0007FD9268CB75BA117517D8203E73FB99A0F
+:10520000E0F7423CB5A40AD5575FC481F02C522880
+:105210002E3911DC40FBDBEE456C9163E376D76EF3
+:10522000D0B1DDC1453E8AAFF306FA00E3AD4ACF07
+:105230005700E380BCC13EB2334BCEF3F17C05D0C6
+:1052400038259FE7F1B22E1854AB595A9AE071C72E
+:10525000DDB54DFA12B463E6F27854D0232F617CA9
+:105260005B31887FCE8A01ECDF35D109CE709ABEE2
+:10527000A57D23ED8B6219E465A45E32CF7AA9FC8B
+:10528000EA9524E4FCEAF5E5592F9967BD14AFE7E8
+:10529000860B8A32C57B8CF0FD0285EC0F23BEADF8
+:1052A0009059FE23F64915B7DBCDF68A0B94B4BDB1
+:1052B000827CE65C9C138E156FB606779BEC9BA0F8
+:1052C0005210A4FDC669701AC9E518ED0FB5E8C102
+:1052D000DDAEB1E78B129632F9C9C7AABF06ED3D24
+:1052E00077F672FF8C0B43A4CFA67F4DA48B793A3F
+:1052F000937D9F8669B3C87F4DE4173747328C573B
+:10530000AF703D5C0BD19C74F00AF80FE0993F6BD5
+:10531000522BB3FA19CEC78D3430CD61B31BADFA21
+:10532000CE23EB0D74CE51CBE307DD288C283761FB
+:1053300020FDE282945A4DE78B91C225E3D3F2E33C
+:105340000A8D27F9F93F654E90E6127DC288473BEA
+:105350009FD8F92260E38B4FCB27171F273EF127F9
+:105360009C79C98FBF2FCF7AC93CEBA5F2AB174808
+:1053700048F9D5EBCBB35E32CF7A295E6FCDBF282B
+:10538000C2DF7AFE2AF4C3F8BFE8B1E4D77CD16764
+:105390002DFF52C092EF39D7DA3E709EB57DCF799E
+:1053A000D6F681F379FB273BBE7A36FA79F29593EC
+:1053B000DFFD8D7252EBC95DBF64D11872E5D16912
+:1053C0003FE99535480571FD62EB9444692499C124
+:1053D000BE7B4EC8FFF32EEEC749C83AED6BFFD92E
+:1053E000E7F90385FB8D8CF98E05AFA17F7FEF1464
+:1053F000F696DDFE1AF1EB1C3E7AF454D42380C1FC
+:10540000D2A06A6C6AE8C7055F184345BC357D7455
+:105410003E6DEFBF0BCFEBB8DF25D46482E33937A5
+:10542000F7ABFCBCAA2344E7B553EE08E13EBD6BE5
+:105430009294D1CF7244E1E782D5313FD9199D9A38
+:1054400087F461D7247E8FA9CBD547FEE3AE2A6BC4
+:105450007B8FB01F8E287CBCAE957140FB7FF5948E
+:105460003B9A715C77EA5F4163707F77529CE247B9
+:105470003BDC7C1FE08EE880EB8247D3E9FCDD0E4D
+:105480004FC2881B82BE509369DE4D6ECE373F6798
+:10549000F3C9675EEF280AD557231C7FD9F0B5E31F
+:1054A00018F175B99BF7AB85BC84AF837540EB09E8
+:1054B00012D2C9E84824D6F0FF06C1CC6FF6F51821
+:1054C000C027F8ED28E535F9E29CFCD425FC30EB4B
+:1054D000D00FC352EDEEAFE5E4E74EB19EBBE1EB7A
+:1054E000D4AF5B8B4750DFF96AFBE052C22F4460B8
+:1054F000BCE03B82B73DE2C0F30580F0666627FA68
+:10550000C675855339FC629E5AEB7A77ACEBD96C41
+:10551000375BCFFCE9F5EC20F49013768D03AEC831
+:1055200074FFC358CFB4E0C539E7DDD5C2FD5600DE
+:10553000B7403FCEE76527F1B3A306F4F58C5EEEE6
+:105540005A99E21CDC913E5CA4C15303296F61F6B9
+:1055500079BD2AF84E0BE51E77ADC0F71AA4D389A2
+:1055600039EC2C7434B37DD9AB9DF7AFC2FD5BF140
+:10557000022E07237C2FF759F87358E17E8D2EAF4A
+:10558000D64AF12C55DC3F62EFB75BC06997AB445C
+:1055900096FB3486DCFE55D1B81EF2F491DFC19043
+:1055A0002F4DFB57D2735D93DA3C88A784B681FCFC
+:1055B000C4076B14C07B30767D300287C0FF59D0A2
+:1055C000E3C1FB4ADD2F3BE9FEABBD9E17376526E5
+:1055D000BF9EBFD6AA7FC7D227777E4A7DF21343EC
+:1055E000EE47EB135A7F2FEF6CDF85F4E9F272FF81
+:1055F0007549A30E4B4CF3ED11E32F768B75A18209
+:10560000C3D1E552EBCD742A66DFEBCD7A330B7D47
+:10561000B2D1FD220C069C9386C33EBF87DCBC5EE4
+:10562000098E3F6D6C3C8CA603C7C32A77663EF893
+:10563000ACE6D3E6CE8F8FEF16F5EE167835E6356D
+:10564000969C18FDF70B7C152FB0E97D59B7D0DF7C
+:1056500069E0ADD156CF63AD67E04776737BC5583F
+:1056600027C6EAFF2D85F387BDFF6C72F89B1139C1
+:10567000D4C92F6B8CE3861F4448EE985EEE9E09DA
+:10568000501018247F01DBEBF378A76014CCE73AC5
+:1056900076FD65E8FF6CFAC8BE6F19ABBE12547296
+:1056A000DA49865D5322EE4D7A443CF00629F339FF
+:1056B000CFB09023A6D8F38AEBC33011DCB74114E6
+:1056C000C4FDBFC8402BCB8F0F2B5A37FA3FE48560
+:1056D000035B597EDCCFDCD01D4697CB82810186EF
+:1056E000AF35114F14CB2778AA46EE69F59D8A7E17
+:1056F0002D6E7781F396D7F01EF0F88B6440BCBA1C
+:10570000611EC5691F5CC174D8CCD1F08C9701268D
+:1057100096B054F807E8FC10B7945FB1AD8B8B4C92
+:1057200079F4037BACEB5EBEF3B6C393ADDD98F0CA
+:10573000A4F7A1FB717C37E45ED78E757E23766D6E
+:105740009EF332EEA319DFAB869DA0E1FDF66189E1
+:10575000D21386FD94560E7B299D345C0A1A235A77
+:10576000C57031A5138727D2F7F2E1324ACB8627DD
+:10577000531A1AAEA2B478F8144AD5E193285D2FD3
+:10578000E4B0687836E58DFB6F85C333295F30FC64
+:10579000794A03C3F378B9384F5DBF3206E8AF5694
+:1057A000701D62F2B17AE1525A97ECF35AEFE1EBD5
+:1057B0007087B827DC61D3DBFDA2FC510F97FBF5A6
+:1057C000422E408E83D96F7E8FA8B7BE3A46F677B9
+:1057D00087B11E962DB5AC87F6FA1D59EE273F6DA1
+:1057E000940B78A0B6690CFAF0F357773046F706B9
+:1057F0000062A497408E59F46E87017F9EF708D708
+:105800002F7C9AF8D8CB0419430BBD5FB8BBF901C4
+:10581000D43BE7DC78C56E26771FB863377970DC38
+:105820002F5C454CF7FD65378750BFAD5F7807DDCE
+:105830006F42F31BE39A3BCFB925FE00711DA3CB4A
+:10584000746A77ABC7740EDAB5F4E6E687587F5A08
+:10585000BB033413BF56DEE203CDACBF0E97966197
+:10586000FB8A1B4A2CDFCBAF29B7B433EE49842E19
+:10587000ABB6D453179C6CA957387F96B59D382783
+:105880000FD49D6E69E70E1878E5E7888CFE96F5D3
+:10589000A353CA4CC7B887EBCB6C7C73A187AF6BA3
+:1058A000E9FE73D32D5BFFF9DE0B49F347D6799000
+:1058B000BD1B4F2C5A80F6945B8DD13D9563AF7F15
+:1058C0007CE7916F3DBBBE2A447D558AFA44A234E1
+:1058D00080FAAA14F5889752A3DEB1DEB75D8BFA81
+:1058E0002660D2377398DC67E0878037B7BE3945CA
+:1058F000944FF1727DB356F0959D6F42A2DE5AD45B
+:1059000037D3C6D637216F6E7D33538CF78FD6379A
+:105910005DB3EE887D8BE5BCA7DDDD7C3F4B3B674F
+:10592000DE4879A62F642F2BEF3CF596F8FD263D37
+:105930000287FF93F3A5E087A2B956FD61F45F10DB
+:10594000B6E911431EFE46B93E22F8351B7DF67FAF
+:105950004AB93E729CE4FA88A77B019E2FE62BD7BA
+:10596000A3EB1FDF79E45B4F6F80D459B82F99EA1E
+:105970004BAE42BF9BA32FCCEFE5C5286EA7EB39FA
+:1059800097F0F370FFDF2C4FE43CE49F599EE82230
+:105990002F6B7F7D953601D76996FF227E37E5A371
+:1059A000B67C93ADFE576CF90B6DF59BCDE5094DBB
+:1059B0009B80E78B89BD2E3A1F4C688EC64CFC74C9
+:1059C000AE97F3CB5E4F3486FD9D983C7902D2852D
+:1059D000E52FA5FEBCBC3F96BFCC965F4AE3A7F37C
+:1059E00057D8CAAFB2955F63CB2F33D7EF3A32F9AE
+:1059F0004E7A7FE3972EC07B0976385F117AA273C7
+:105A0000CACDB1362E973761FBCEA9B7C42F05E2B8
+:105A10000BF2A33903B6FD1FE33333BFEC15FDFCD6
+:105A20007CD28DB46FEA64FB278A63443F5E06FC38
+:105A3000FCDA2BDEE1D2AEA4FB0F89B2EBC9CFD1E9
+:105A400059D146710A073585CE67135599DB1B7E00
+:105A5000A6CE8ACCE708BFC6205C933D0235DCFFAA
+:105A6000876270D481EF0971FDBEBAAA83F4AB924C
+:105A7000BA92FB37CA62E4DFB84FD04F09C4C9AF4E
+:105A8000E0AE8867DCD7778EE0C3EAD7DC69E04315
+:105A9000EC234DF820396CEBFA6037AEAF096F6636
+:105AA00039FBB197CB992B94DFF8A3E7CFD7872D9C
+:105AB00078A925C3BE36E1E271F2FA24EE0790D947
+:105AC0003866BF827DBC9179DAF6D9F70A3C25BCED
+:105AD0003CCEDEE8CF0ECFC3A2DEC35EEE5730E68B
+:105AE00025AB7C9CB1FA7F162F6BA11F40B5FB2123
+:105AF000AC7AEE1651DF15B4D6CB869F9523F8E12C
+:105B0000F15806FF8EC5EFC6387B112EDACF66DE60
+:105B1000876B87E752FCC64128E8EBC67DB3ACBE75
+:105B200086711C37B16D12FA4557C93AC527E81A74
+:105B3000A80FD2F9273F7FB8C9797218F59D47C4DD
+:105B40005500C655044D7189C2CF79A7FFD687B1DC
+:105B50007C85EE56F17D9361EF641EB77A7805C5BA
+:105B60005374B19D3A8E7BC85B99C4F7AC9C453D9C
+:105B700064CF3B9D33E399E24C651FE7DBB30EAF87
+:105B8000233DDBA1F17B371D72CC53320D5DD53A3D
+:105B9000C96B97963B7ED11E07E952EDF187567C83
+:105BA0004DF771FA26C4FA9BF0869BCDF149219FEF
+:105BB00097CA87BD56F83A11BE00C215A778D244DD
+:105BC00085C381783B5EF019E32A558E28E22508CB
+:105BD000318A57F184641AD7E1E7F8CD362E68F29E
+:105BE000FBE6F7638E173E47D6DF18E727197CC41C
+:105BF0004FDA024FC336CC3FE7A4F5D43ECE7E5FEA
+:105C0000EC349FC92F2CAB317A77C6E8EFDC713CBE
+:105C1000CE5BAE00F2E32B106DAC62F35F55C1DFDB
+:105C200059940363C44554D8FD15D9CEE5F8F988D5
+:105C3000719E53FF073EAE4FC40B14C020058B1658
+:105C4000A14A9F8CF1029AC4DF81084B3CAE7C3E96
+:105C5000C59107BD9F75BF8BA95F29B21E8EFA8FB4
+:105C6000A15F7990FC5C9F79BF63C0EB85BBA95FA6
+:105C70000C4D3D5A9AEE17F52F39950E1F3D8AE7C8
+:105C8000664E30FE713B5C76F07B55505E48718706
+:105C9000AB83D77BCC746DF5555BD65745EDB84ECD
+:105CA0002AC47B9FD7440673F0E56A9423F42356F5
+:105CB0005C1619ACCD5ECF805366D3CFE40FED50A8
+:105CC00062C956B4172B033C5E558ED3F948A754CE
+:105CD00032ABBBCEC4BF154A0AE12AA88BE818CF65
+:105CE000D859EA08631C960C3DFBE87D27E7A270B3
+:105CF0002E79952BE4F7CCF3D9ECB3C681AC1A839B
+:105D0000DF570B7D9DADDCA5846399F4F0E33EB1D4
+:105D10008EF932977FEC6F78D49761DDD921F454F6
+:105D2000673153A59FE3EC837C2057EC790DF1B0EC
+:105D30007ADC39B9F5936AD54FFFE58FFC04C7C902
+:105D400001C7B399E0007C4C210FBB5F5D40C18867
+:105D5000E978A020E76B8C0392C6D37928FD5B5BC2
+:105D6000775F0AED6ED7924004E9E78C6C035C47DD
+:105D70008DB82067C4F7B683E8399FC707D5723F4F
+:105D80006B84FD477164F373C78D396DF95FD9E991
+:105D9000DCF20CBD1761C06FC4A9DBE7F5A4BFE15D
+:105DA0002DDF9C4CF8C86F1FB491F10B307ED9C029
+:105DB000D6778614E86B5129DFDB12A27C4F8B4625
+:105DC000697B4B2DA56BB0E93C8CFF8827AA703FFF
+:105DD000127A207439ABB2116942712D5B17E23E21
+:105DE000B27B240FBAC4E0EEC6FBF1CC0EFDAB6F64
+:105DF000C342B443BBC5BB3BA0772C44BB2C9DBF67
+:105E00006B35DA85DD228E565D73DF42DC3F6E9C9A
+:105E100064EC93239EAF9AECAF297E17F11FEDD56A
+:105E2000A8FDAAD5D89F571679D8BED09A8708C2A0
+:105E3000E3F5F0FCB9FEA7081E52016CBC0BFC4F49
+:105E4000537EE314E17798D634061EB91FA3C3A787
+:105E5000713B685A09F929947018AF17C0C66201DE
+:105E6000779EFDE0FE87D6BB9733AF9769B919637C
+:105E70005D13708C457F860EB22F500FEB38EE2BE2
+:105E8000FCFCFC788FBBD1756C7851E60EE978F597
+:105E90006BA72F76869FB52F88F4A7AA58BE70519E
+:105EA0004A27F1CD73DC32BFB84FC6E68BF26FE004
+:105EB000D9B03BAE433A8E4BF7E70A46E8BCCD2B50
+:105EC000DE13CE17DEA53ED5D20F3CD65096EBDCC6
+:105ED000655CD481414623FAA2B4D127823578BECD
+:105EE000385262C917CD2DB7D42F08575BCA5DEA67
+:105EF000C996F2BF954E5FF7A916BE8EDAE6B5D009
+:105F0000569E6FBFDE154E0DDF83AC920D7B740382
+:105F1000DD4B3E883846FDD83793EEE9428D710F50
+:105F200001285EC5AB45883F7D10A6755AA9B0DA39
+:105F3000A972D06AA7869AF594D12FC6677B572895
+:105F400034EEC83A15E0F120C63919EDD727A3AAD7
+:105F5000FBDEDE2ADE2E6CBE7F6F4F65715E4677FC
+:105F6000EFABC63E4FB58F13FA4AEE38357B7D084E
+:105F7000C8DA0193FC656F27C301D3BB1A5B91F6A6
+:105F800073D2F88F6C5B427E0F37303B9AE17955C4
+:105F9000E84288B17976601546BF04A68CCF3B42B3
+:105FA000B3548AC3D7385D1D1E2E27DFF16B967858
+:105FB0000E6780CB89516F2CFADFE48478A6F5EC6C
+:105FC000153FDF271FBA35FE27DC5FEA2F01BDE34F
+:105FD000DADF324CEF5CD6A5CE75A2DFE435FF7870
+:105FE0009A4FDDEE88F36C533F75C0DFFB66FF9C74
+:105FF000667FAAE11F86C31E8A0BDE9EE271C1DBAB
+:1060000053FFBDEB28E6F73AE85DD1EDFB72DB57B5
+:10601000FDC2BE32EAF5EFE5FBD57E19FC25B9ECF1
+:106020001C71FF6D66CA1677288313E97F68A5E6A1
+:10603000447BA7BFC523E1BA3F4BCCB32E1571E219
+:106040007A3AD6BC76DAE86BCC13EF1FE23CDB037E
+:10605000FC3E60BBCAE64B7CCDDFCBCE06EFC8BEB4
+:106060005FCD8C0FA580BF7BA1B8626AA6798F75C2
+:106070004FD180AF03E19330E5707504391D3A428A
+:10608000B9E9B04AC067D46B0F723AB433FB201F32
+:1060900078E480151E66E34968170620D9486F9A90
+:1060A000E9F012EE8348556888879DA97B105EBC95
+:1060B0007781F67C719D7439DEFB8871FBB0A02E70
+:1060C00095DA1124F3248AF7324A0707526FB1F2A6
+:1060D0003DCD7E7AEC49BD7C7F0AFB91D521929F14
+:1060E0006E1C8CECA3C91D68EFACC63F994A9FD0CB
+:1060F000133A07ED0F19B85E6012A7C9E3857D92C8
+:1061000041DE4DE7FBD25177BA5D36BCD9ED4E3753
+:1061100034E5D657E2BC5F67FFA1BE516DF723ECB3
+:1061200076AE3D0EFE0CD4E7E3F2B887F129C7291D
+:1061300082FB3CF81E82B3D6A1E23BCC4CA517E310
+:10614000FD1F7F448614A3675160909ECE1A0BEF0B
+:106150004CFF35F2B8D17E30DF236D0A703F50B06E
+:10616000A94E92F83D020DDFDD0C36ED0D67E253CE
+:10617000833F47F28127483FAE866402E34EF446F0
+:1061800007AD6BDDB5D5C5E6FDD1750149EC430D15
+:10619000FA83269F9AA63F9B5FC43BE3EF47FF929B
+:1061A0004556BC1F2B5D5606B85E1A8BFE9F761CAB
+:1061B000836EA3E5A355D06D23E9BFAE9AFCF44AE4
+:1061C0009A6EF791BCFA6B2192CCD0AE4DD0CB7EBB
+:1061D0006FDF0371C0DFA3708A7854E784539BB7E5
+:1061E000420EBA8C8AB3E2FD3803DC9FB656F285C4
+:1061F00071A8B559FCCB350592D0FF833C9E6FDE6C
+:106200009E109E1FF7CC3910C2738EDE4F329F4313
+:106210009E5B20CE4522AFD33EA0770EF70BE23F28
+:10622000D43B37F13FA15A7F7713BE63B6F64DBF1B
+:10623000C51EEA68C9ED6F50CAAF88A19D71E86DAF
+:1062400049C3F5462A5F7122C235306F29BD3BD262
+:1062500051B793CE617AC2B9E962C4997688B8E839
+:1062600091F1B39C1B1E12F25AAD5F4DF6656FD9CA
+:106270004B34CEDABADCE3E07B59B9EE45791C1039
+:10628000237FB1ED5CF70D31DE1B01713EE18A7EAB
+:10629000697215FE2E874EFEB1F1B5D10107C35BC1
+:1062A0005341ECD500A36BEFBC1BCB100E7C27C673
+:1062B0004CF720F69F01BEF1050E8BDD74A83AFE67
+:1062C0005F2BEBF0F729A6D2BBF546BD9E2C71ECF7
+:1062D000271B74D6BCB4EFE9C0B87F065F4F597E68
+:1062E000F837E87C163CEF998CEDB3C4F91AA97D18
+:1062F000BD1F0BEF763CF4BA06290EAA57CA3C9F85
+:10630000730BB8DCF5AE4CF173B57907E85C2D90F2
+:106310007A9DE227BE3B671F9DAB5516707A601CC5
+:1063200025DA518573F97B80D9E4E85E413F59B5A0
+:10633000D60379D072EEB32520CECB82B9FB33E001
+:1063400004CF203FEF192D97B4FE3CD8F3C01E7A3E
+:1063500037055274AED0F18A13EFA68EE061945CDB
+:1063600025F8EFC2F4E2C6E3741CE7D60EF493F40A
+:106370001AE76C33F9BE49AE4BD1399BA740B3D86D
+:10638000EB81B0F12E627EF30CE05AC4FDC332AE55
+:10639000ABE88F47F8DA675E48FEB46C74FD8E3F59
+:1063A00036BB609CD9AFCFF75DFF6C7C7828A059D5
+:1063B000EC433B3FBAE11BC7B4AFCBE65F3E24E4FE
+:1063C0003388154DFBA46F162899F1FBD64563E180
+:1063D000F79B99F17BB10FE13D747BE6DF2732D269
+:1063E000BB6CFAEE2E231E057F24A48CFAABBA20D8
+:1063F000C3BC8D75F55081F17E4FCC87EB46B53E21
+:10640000DF87E33FD473A90FC77D68536E7A1AE321
+:106410006F11E78B49F1EE88519E147CB9D5A6E740
+:106420005F16727D8F90AF873C511FFD5EC5AE8BAE
+:10643000CF3B89E1AF9AF105BA14B52E28C9357E54
+:10644000956EDB971CE3BD96DE025B7C6F9EF73496
+:106450003F2D5EB622FF9C8E78F877927B67AA88E4
+:10646000E4A9FA1ACE37D5970DA5705F3B79A3231F
+:10647000A9511C4B8CF052768DAC514C9BB8F77ADD
+:10648000A258DFC1798BA312CBF1DEB88A6E17F563
+:106490006B140F73B7F5F73F1EF244DA14B47F1391
+:1064A00014E908D53DD6DFCB9808A6DFAB60E396AC
+:1064B000BDF92EFD7E4A99ED77413E2DDE77FC83B6
+:1064C000F09E94C167D6C79A04D14C7AFF3F055F0E
+:1064D0006AADBBF93B06F100BC633AE760F42B41BF
+:1064E000BB608BBEA11EF1A927203C25831EFB6D3E
+:1064F00081DFF81D9FDDF8CE82AB82DF3F5BBDE41C
+:10650000C2C11D4C656DB9A5C1721FC0A4177E5BC9
+:1065100040EB13D70B49BD89A7879DC427537A2029
+:1065200089BF83B260637CC085A27E0D7F87BA2C51
+:10653000A14B0ACB5733F395750F93AF005E7F31B4
+:106540002423C447F06A687CFAF74E2A07AF1BC0C1
+:106550007DF11EB62FC6DF51317EAFC4E097897141
+:106560002B7F4C4958F3136CFC626F5FADC17938D7
+:106570007E4D8F03705F37AED9541FFB83A1771F09
+:1065800066E34FD98D0F33B2B42F77FF32C45C85E9
+:106590000C9F4FDD1AF8652D9BE0FD3D0DA58897FA
+:1065A000873C40711107A31E7A7701A299CF9346C9
+:1065B000F1AD61F767A99FD697BC9EB1EE75BE2974
+:1065C000F1772E2AD5B7ABD0CFF92AFFDDBAF4BBCD
+:1065D00015A7D3BB15218873FB11A294B60BFE54EB
+:1065E000CFAEA8427F68E22DBF8AF7B3D452AB3F4B
+:1065F0004D2E69A4F7C046ECEE126677B3F244B1B3
+:10660000558FD61772BB355CC8EF85AA7EDE0F7832
+:10661000F432B3DEDF582859CB037AD9974DE50D14
+:10662000A27D42BC5B7E56E1799D68CFA81359FDDF
+:106630000CFCB9408C6B944330BC0FDFFFD8F48D59
+:10664000A639E6F57C63213FDF514F10E35664869F
+:106650002B51C5C7BD4D8CBBB1D0FA6E1CA83C35C3
+:10666000BEDF5170A3B49FE1FB900B1A305E65D57D
+:10667000384712DF4DBB69BC1117965B4F18741871
+:10668000C1B7CAE391CAAF50673933C8B1916E6ED2
+:10669000E47E2AFBF74BC43CDAAF68E8AB61704597
+:1066A0007673B9730721E3391093EF4B0AE7645807
+:1066B000F7DB1B691F77A838F7BA6FDFE7CAC2BFDD
+:1066C00068AFD72AE8A4BD1CA2A7B8DB43DC9F684B
+:1066D000F47FA88CFB15EDEDBA6CFD7BA1298271CE
+:1066E000C678BE8AE7AA4A0D24F1BEA92FD8A756BC
+:1066F00069181FB04FC7FD91060C8FE8670B03D9CF
+:1067000075ED21BE1F95437DF50E8C278146D56C16
+:1067100087958BDF5534F2AE40ACB590ECA1884440
+:106720007891F979FE2157F25CC4E7AA2A07647AC6
+:10673000A7BFA790DBB99BB5A617AA32D06F7DA1E2
+:1067400066B19FCB87B9FD9DAD7EBA1E876F841F52
+:10675000433ADD3F008DF3635341E4F6C24CE7B7A3
+:10676000865E117EC84BE70A850BDA45BF66F3B833
+:1067700072AF8B62D3CF3ABC650FEA5F27D3BFDD20
+:10678000F43B727D7BD00F7919DE7F62F92BDF9CA1
+:10679000AE54B2F257CB9DE2D1F968218EFB01389D
+:1067A000C85FF201BC5438DB44BF270B15BEDE24A2
+:1067B0005CA4470D7FDCE57D2E8B5EFDF6266B7EAF
+:1067C00029348D473FC5D28D2E4832FC5E69D3BB3C
+:1067D000F717F273A26F43BC03D7CFD5E2FCEFDA11
+:1067E0009F4C57506EAE9CAD56394DF7AE9E2DE482
+:1067F000F6DD7B8C8F34939C5D15482AB88F7B67C0
+:10680000FBEC0B3F0FD84FB2A31CFD69C599E30009
+:10681000BF95B0C239D63CEC701BE779D9E090B790
+:106820004919FD42CF154A167FFC2A0F7F0F29B266
+:106830004A06EF9918870774CF4F7FB380DEEFD6F3
+:106840001BE21457A7B7B9D555418AB3A378BA1537
+:106850008C60F8FED001C17F465C1D33284EC37D9D
+:10686000DAB59E4105FDCACBE57823FE749A712EF8
+:10687000E376C5221319FCAE67EA5313C1522F9178
+:1068800067BDBD52755EF51A1D39FAFB50E8C95F48
+:106890003C76BF82EBCF078FBEFD4594C3AB9F759F
+:1068A000025ECDFBF0B10248D1FE21A9A09C5FB5EC
+:1068B000DD99F11D098631EAFFEA1F15905EBCEAF9
+:1068C000097772116B7FD5D3EFCC00264F1FB60D21
+:1068D000ED9988F87B54E2E785FAE00C5C9FAE9274
+:1068E000E19B99DE1DF31671797FFFA7FE66A49FD9
+:1068F000B46DE012EAB7FF2297F95D7C28E2EB0F56
+:10690000ABC7E3261F91925332E80F633FF4FE2397
+:106910003CAEE4AA675C490C09BE6ADB5625C6E0BA
+:1069200058BEED23E297B37FF47821E261F9334E4C
+:106930008B1D71F58F3EE9389DD1F96A270C2D42E8
+:1069400039761EA6FCC18867C84972CDE35396917B
+:106950000A60F59EFCFD39BF66E5EF859C8021AE9F
+:10696000EFEDFB9DF22CE6630166B961FF56BE5E5A
+:10697000BEED1D857EC7C80143159FC7F30FAB9DB4
+:1069800064AF0F30A4A09E5ADEDFF59193F1DBF2E5
+:10699000ED1FBC817CB7DC261FEFE11F65A3EDF383
+:1069A000994536FB7C5B695EF6D1D58F1FBC17FD20
+:1069B00011EF3FF1C77BF11EED35473EBEF77B1867
+:1069C00017F66F5E15E57BF9A3AF148249FF9F5F51
+:1069D000C4D7CD0F1F79F8A1CD6CFE1FBEEE266C7B
+:1069E0007DB8E3F795E8FFF9F0C77F1D8FFEA01B88
+:1069F000762CA4DFADB9E1A9B327E45A17915F93D0
+:106A0000E6DF5714E746DA33121A93003F13A98DD5
+:106A10001ED037A4E0BAF6170986BA8BD9F7FE4F15
+:106A200014B4CFF6446008F1B36BFB3B7B6E66F9A0
+:106A30000F187DDC19E8C3E63FD141FA99890D4B67
+:106A4000976DFFF297CEA8C3D44576F8721822BD91
+:106A5000398AAE2F33BAD6A5E96A2F3F0887153C8D
+:106A60003758FE18A3E30CA427A3E38CD174FC00D1
+:106A7000FF98379A8E571559E3920EC2355B3663ED
+:106A8000E1F6D28CE7BCC63EEBDAA7BE9AD37E32E3
+:106A9000F4C25878BE42E2709D5A14B9B908E5EBC9
+:106AA000891F3CB439C8E9BC8821E6C3C70F560228
+:106AB000E3933FB8862E413C0CED70ABB8BE5FB59A
+:106AC000E357246F1F3EF5A2A2517C0B144AA7B2D4
+:106AD0003C8CFC7B09587E99C433D73EF0FFCE79BD
+:106AE00083B5BF167F3A5525FA517E0F933FA247D3
+:106AF000F282460DF56E721CCD7B5992CBC5B2E485
+:106B0000C05730AECF8EF7278B1C86FE1FA12BC639
+:106B10008D2DDBFEF639C87FD9E869CC5FC5F99FBA
+:106B2000C6CA1FB0CA6D563915F4FD70EB2105EDCC
+:106B300083D4B38AEA60F6F087AE2185D6C71F3BBF
+:106B4000D507C3A3E99EC6BF883F3AC67DF80FEDBF
+:106B5000722EF033969C8F3DAF63C3DBDD451ADFA9
+:106B60005FD9F0F7FEE1CCFAFF39A1379641BCB10D
+:106B70007CF2E8F54B86A83EB12A0DEFFB183FC624
+:106B8000E07DFF5127ED0F3BFA77911EB7EB8B6548
+:106B900059ECE8378AB83DB0EC998119A8D7DEDF07
+:106BA000F953E2CB658FBDADA0FF66CFB62795C187
+:106BB000696939C0F5C1FC3B38EFFF706006EAAF88
+:106BC000E559E2007F2FE6B3FC67D6FE973FF691CA
+:106BD000A5FFABF57E85FC64638CF39E1CB908E7CA
+:106BE000FBDE3E179E60C07BFDCEC64C76CEF362C8
+:106BF0007D34F0D45170EA6B4578EE55C2DF616C9C
+:106C00006F8DFC8A7EBFF74597D8DF465E437B6673
+:106C100055B142F711DA0B2E247FBDD15F9F0D9F36
+:106C20006A50ADC7FD80BA205A67DE5719F0174782
+:106C30001C16F86F28689CA005F8FE4C63FB8FFFBC
+:106C400001AB8A1A34008000000000001F8B08008E
+:106C500000000000000BD57C0B7C54D5B5F73A73CF
+:106C6000CE3CC24C2627AFC9D37892F09480431211
+:106C7000DEB40E0491226A505AA9F5AB03F28821C2
+:106C8000C9A4F8E25ABFCB8444F4029F8D95166ADA
+:106C9000693B70A152217690A0B10DDC012C060554
+:106CA0006F105F78B18D5A152B246314B4575BEFC6
+:106CB0005A6B9FC3CC9C4C84DEFBFBBEDFEF0BBF4B
+:106CC00076BBCFD9679FB5D7FAAFD7DEEB0C28DEFE
+:106CD000DCEA5400D93D6B366461AB5AD41409E048
+:106CE0002BFABB2AD6028400C603585DD5E0776133
+:106CF000AB5A407300FF7D45FFA7785B7BF0F97BC3
+:106D0000E5D4D6B5348FB5F157D4872605B657F2FA
+:106D1000B0914A25DDBFC2BBB61860A3F39F1FA781
+:106D2000FB2B8376D58E6D73EA3DBFA5FE0609AABF
+:106D300065EAD3F3383E6875A8DB55BC9E0E0BC2DE
+:106D400065317AF25424321BA00CE9A016FFFC3006
+:106D500001DF2B488266A8031C012959A120B5C672
+:106D6000730FAAFE62757CAC2FBBBAC18FF35E2D88
+:106D7000BB2CB4FE07732D217B31B537A641D9401A
+:106D80003E18ED03ABAA213262F0FBADD98E855BD4
+:106D900080E90E5A681D9223B49D08F181A67A807D
+:106DA00069030DFF873C74C4D18D037CB40E45BFCD
+:106DB0006FC565D14D3B04B94D213960EB84084066
+:106DC00029D2AD96B05C52A1479F240AD563006ECC
+:106DD0004CF57F93D6993BB451A2EB1EA8E6B612B0
+:106DE000FC12DDB738EBF2FC5FB33E58A09CE9190A
+:106DF000A9CB175FB1C12AF8AF28A00C29273A36D2
+:106E0000ABEF8FC679E87E268D0AB21CC6557D672A
+:106E1000740BC181888FE3F323336764126E8C7126
+:106E2000CD8EA29312F2DB27A7A82945D85790331D
+:106E3000C4A753A9CCA71F4DC399F1FE8F4FA56ED0
+:106E400095511E8F48024F41C213E10A1A1F277C39
+:106E5000B8113F6BE9B9198DBF65BC58A0BAB952DA
+:106E6000E7A487F827FE106F8CA7958A43B57B8926
+:106E7000B73E4DA1796C105A2B11BD7EE6A7035A7F
+:106E8000B91D02616E5DD0CDED5DC4E76C92839754
+:106E9000FB69D0D33A149F9BA356D7AA78FDC7B3FA
+:106EA00033245A9F0B549DBF8579D41F94BF3391CF
+:106EB000BF8E187FEDC44FE7407E3A40653EA47B0D
+:106EC000C1BB761CCF0B115CC723D321243388545C
+:106ED00050112F39FA3A33C127117D841F5A5FF6BA
+:106EE00002B13EF3FB72A195C7E54398DB42E8E6A9
+:106EF00036C3A14A0AD3734A97EF3BF09533468FC6
+:106F0000D1DA09C138FFB9429CBF98B9ED963CB4BB
+:106F10007EE3AF9A71F887CA83BE2A1CA7F85D3E4C
+:106F20003B2EE5FF54CE201082F5720548AEAE9E92
+:106F30008573C18DC3BD36888CA4D9834C5FCA4884
+:106F4000D137EC8B1D051531E8C7E7ACA73E3C45B2
+:106F5000CF59216E1CD121DF9A467C7F982E4C1E82
+:106F6000C8F795A79AB29E8B9B77AB9A9A45EB840C
+:106F70008930F12B39F63C4CCA402333F0F9CF5617
+:106F800005B39EB3C6F8D0E2F867C6A50F019CF220
+:106F90004DEC138EB36238465CB29D0BAEB6ABCDF2
+:106FA000598C43C6E94A64901DDBCF528A42BC7EAD
+:106FB000689C7823DA618BC3274978BD4E75878832
+:106FC0003FF5AEF02CB61326BB317DBE1AC9C77192
+:106FD0007D8DE025BE6EDC73C369E26B9F07347B59
+:106FE000BAC0856F02D909C38E8026A37CD748E337
+:106FF0001C12B6F5ED1FBFF47B1C9FD229838CF7C2
+:10700000FB70CDDDB46EC5974E4274C2FA04FD6EBE
+:107010007608FD31D669D6D77F749D28799E9FE585
+:107020002093FD5DFF2FF47C3FA4B6D2F84D0ABE3D
+:107030009AE6EFB286B6231F561C91196F2BDAA47D
+:1070400010909C152D8DFAF7BE2883C01FF0FD7B94
+:107050007F55CA789461F48FA6E1F381CD562F5AFB
+:107060004C48F725FAABCCD943408BC301047D2FA4
+:10707000E722BF16EBFCDAE87C780BD1B3A949F81C
+:10708000A7ECEA8C84F19FA55C6F5B8AF36B79486F
+:10709000D714C24DE7F035D85F5E20AB329A889C9A
+:1070A00005F989FEB1D5FA0EE99F86FF08DF86FD56
+:1070B0005A4AF68BEC907C3FFBBF7320FC9F02C2C8
+:1070C000FF35A0BD8AE07CCB3689E78DF96A3A1F8F
+:1070D000595380ED1DA1C4EBCB4189F5D9CFBA47F7
+:1070E000921D580943BC766920FE2DE9887F0289EC
+:1070F0000B5C420E2E2FD997FE5764AF5DB082F520
+:1071000095F84E7644EE19B1711ACE17E8B242489E
+:10711000237989FBFD9BE550B038A61FFD5D7B9868
+:107120001FCBF2901F884F7B6E22FF53B444FE3B6F
+:1071300047667CAD3C52BD267ECA7399FFC86FA0DE
+:10714000F9D32695243EAFF37B24FE13FCF6319D44
+:107150004B3B24784C223EAF3F5CA00DE46B43C711
+:107160002336D2FF8BF1D5CCC7D1E9BA1DD1F9783E
+:107170000E3A0FE8A8AC7678D894F03A14B5753A80
+:10718000E1B410F5967062D66B837FD62CD567C3B9
+:107190007197D1385C5FBE232C94D10BCA09C2CB46
+:1071A0002261779B551FFB23C3DE3A2FD8ED77E191
+:1071B0002B6CB3E6553E4438BA534A6D952B07EA1B
+:1071C000EDBA31F7B0FD2A5C8DF698FD6A629C1627
+:1071D0005EE5F02E467A9E5C05DEC5C3009E5AA58C
+:1071E000726B8EDF0C7DDF8CF19B5DF8679E5741E3
+:1071F000FCAE55C9FE7855A2F3611BB09EF69541D1
+:10720000682BBE3F1CF9D4A391BD2E8F5E5F8DF11C
+:1072100045600954539CF1AF1922AE7B466F6765F8
+:10722000D8B85D5B6D011FBEA7B7530E49485FAF6D
+:10723000EA3B7215D99D4EABC6F1951A7DE97B7C70
+:10724000BF425D8BFCCCB3B48EA3F7E2F8D9219C8E
+:10725000B7AFF35DF7ED717EB9B7E3D1511407FD18
+:10726000CC0235E124F1D0F2740BC731BD23DFF13C
+:10727000E0B2A1DE11B501E2E9C19EC66A8AA7EEBD
+:10728000746A4C97AD7D7AA480F1338FE3E3E7967F
+:107290000E61BCED3D0321D2BB59F2ADD78EC1FECC
+:1072A000E45715AF9D95CA77FDC2093C84E5BEE160
+:1072B000CB8A4DC4BF00F273355F6C3D41F27AF664
+:1072C000CF0A90DE55363EFDAE1FD7793817D13044
+:1072D0000960822F5C11C151333BD3A7937E074EC7
+:1072E00001EBEBF86E2501B720D71D2A20BBF286F3
+:1072F000080F27BE61BA0F4199E2FFC93D89D7A7A0
+:107300005E04EFFF62D80D377808EF8FADEA807723
+:10731000C92FEAFE331F17988C9F06BEF738673CCB
+:10732000922EE2769970EB55928F7F2743C4F91B1A
+:10733000BE9425C2655F14BCAB915F7D8BF379DD94
+:107340007D9F524086ED97F2EC709278EBD7E9364C
+:1073500096DFCF6C02F73F5BEA0A35E17A0E2EAD7D
+:10736000BDBC07DF77FE9FFC97AB5F1707A369B132
+:107370004C6279A511DFEF9CD722B11E426B1EF142
+:10738000CD3CDED013436F0C7DC95B3AC41F4AF27B
+:107390009EE1B43EA46FC6D291928D70BB5F029203
+:1073A00063EF6AA4EB6BE2C720AC2E207A021D9F2C
+:1073B000D8C85F3B3A255F28C9F8C3E96EE65FEF9E
+:1073C000EA60D354E4D73D8BF059D20B5B6B71B2BA
+:1073D000F983B0A1008343684BD704EE1D701BE90D
+:1073E0002528AD79E4B77B3BAABE4576FD31D44371
+:1073F0008A1B7E66F532DDC17A80EDC4160A3CB187
+:107400005F783D6C591B974776A74F3F958EF39D4C
+:107410004A5779DE4CBF5722BABD7FFBCC4DF3F7FC
+:107420007D6E67F9E5930EC7C56D9FA60BFEACC9CF
+:10743000F0BDC678A9C96263EAF5BBBD8B2B00AE6F
+:10744000EC407EC7E13226B720AF3BC31F647A32DF
+:10745000BA3171E2FCCBA751BC1CD08D334424500F
+:1074600026C4EC73A5A3305220F287700EF237A326
+:10747000E6C76CAF53D00E53280EDD8979115B64DB
+:107480007C9E749FEC42B32AE2AC967461E75A1E6C
+:107490005142CDF8DECD4A4FCA306C8B7DDA0C45B7
+:1074A000237B5FC6F3E6DE05ACDF164748223BE4EC
+:1074B0002CFD45FA85B86B2AC0EEBFC9CC7FB39CC2
+:1074C00046EB7AB126C3FF05F1756C57F420856F42
+:1074D000DE14C824B9CE925DBCEEC96785FD31DBF0
+:1074E0001B39F2AB9F91BDE9D3F3A724F6E676F200
+:1074F000AF86BD01B9EC10E167EA8B7A9AA9DB1976
+:10750000CC3E980F138FFA9B5D49ECCB24A84E43D9
+:10751000165FD4BE98E588C1FE857E2132A3A20BFA
+:10752000F528EE79B33D2AC8D0FDAF6E8FCEC1B439
+:107530009CABB5185ECA577A0FD9E3F061D8A11891
+:107540005E428C33F37B24705CE8ABA5643F8ECA4B
+:10755000696477A6A3DC71FE2E5D4FD23F0D7D8B53
+:10756000E4BFA1F39A14C2F5535D550E529B15B9B1
+:10757000B2F6678C9F9503F383A0C385EC9DF15E03
+:107580002B3834D748E28785F920ABD88F7B7F7FB3
+:10759000AB349BEC220A2D6DFE98C1EDC18A5C1BB9
+:1075A000BFE7A9AE9234C2910B30BF45F955764A78
+:1075B0001C2798716DC67133BEC0C2796335C7137D
+:1075C000B214D6F71D12F3D2E2E064F65377611ECF
+:1075D0004E716B7F17FA2D6C9F423F4F714AB36B10
+:1075E00016AFDB58AF41DF5DA93372A06CE0FA8DB6
+:1075F00036F0B90CA1CCB8BE12B5118E039FDB12C8
+:10760000AE1BFC1C8C0F063FA7103FA5FF3E3FA7FB
+:107610006608B99AF9FA3F5D7FE18A49906C5FE0AC
+:10762000FF97F54F05FFEF7B44BEF55AAE27664F37
+:107630000A57CC9697211F26503CEE8DD90707FE9E
+:10764000237C8DED68657B3309ED0DC5990575616A
+:10765000B62F137345BE64B61B5776C24D641F2701
+:1076600047302EBD04FBF129FD471EEFE3FC32033A
+:10767000E91EF7FC82E5BBF0D2580D32E7E27BC68B
+:10768000762B5EF27BD09D99745FC0EC378CB8D4BA
+:107690008847CDE38C78D4F0270D3A1FFE3DC3FF19
+:1076A00064065D57D520E91BEA55F8312FC35EA368
+:1076B00078A13BBD7A37DF1F190E721E50022AEDEA
+:1076C000EBA0BE721C56E97045E4B103F5D369D254
+:1076D000C330F285F609822E4B689834900E0CB7B1
+:1076E0008314F7E103FCFEA5BABF28C4312CB4060D
+:1076F000E0F8BF702CF8C9EF1696638BEB3CA6C779
+:10770000232F995AA4FB79E2AB5581A0BDFC1FA79A
+:1077100097482C2827FEF8FE40EB77CCF631FD0584
+:107720002A78298E2F50C29217DF9F51A74917360A
+:10773000910C3F8DF315CCD5D85F160CC53E8DA7A7
+:107740007827895C7A32ACBCCE7A47CF611BF221B4
+:1077500030B771B6DB128BD3ED56BFAF80F68F3AE0
+:1077600044BC0EB4DF379EED9244EB516608FE0434
+:1077700054915FB94065BB59A9CBB1D23197F77726
+:10778000C827DA270F5CB7A4F97870FE7CD0829303
+:107790006376D5C87F701AA0F798ED6ADFBED72F41
+:1077A0000BA23EBEF5BF3F4905BCFF27259A4AFC08
+:1077B000387DFF89541FF2E3ADFB45FEF27D537C1B
+:1077C000A4640AB92ECEACFE82F87ADBAABF4D883B
+:1077D000B72FB0329BF5E28E904CC9F005FD59BE33
+:1077E000C3C97BCF46BF3E9C99D037F4A0DE0E8D37
+:1077F000C9E2EA6999222FBA63D7161BE5D18B3308
+:10780000FDA999D83FADC77FA7DB53793FC0A067DB
+:10781000D1AE7136E2F79F3AED106103D96D157262
+:10782000F65D2F4DA0CD7BF167A6F3F0FE021BEDB8
+:107830009F2F91202AF6B5E0F0CFB1FF5EAE0C6B22
+:10784000BD03D7B1E42DD56641F92C990ED120EABC
+:10785000D5A2BBA435F7E2F8457E17457003D6B92B
+:10786000309898E72FD3E395DB1FB29AF2A4C6C3F2
+:10787000B45FB618E7A17C76496BE2FDFEAE3B0F24
+:10788000FF9CFC40878DFDC0B28BE44FE332F5785E
+:1078900065024CFCAA94E295B21F956983DB25230F
+:1078A0005E39BD0A083CF097550E6ECFAC52B9FD5B
+:1078B00042B7D7CB3B0E1C665C2BDD13C8CF3ED541
+:1078C000F5AEF3162DE637BEB9E593433FC77E0507
+:1078D000ADB398EC65C44A78BC4AF71BCBF438A426
+:1078E000E273B3DF38F087DF539E8DEBDFCE19D71D
+:1078F000A5C523B782F2693C1F0C3F62E6477F575C
+:10790000A99370323F33713FF67FCA97C19EAB9700
+:1079100011D749EC87A14F5F64087C2FDE366F4D8D
+:107920003EBEBF79DF07453DC22EBD069E185ED123
+:10793000D033DE960144D7223EFD9DFF7498F87443
+:1079400098F03689FA97F1FDDC2AC42FEAEDB2CE21
+:107950000FDF84B1AC5FB9965C6A23B9945F9A710A
+:1079600068C69F196FBDD69E22B20F669CF54A89E4
+:10797000E76446BB34539C5F2CD67CB328DF45B705
+:10798000B646E5F508FB775A693DFC43D2DB6D123C
+:10799000E787F5CFB43D4DF6A8F6B73F71933DFAB2
+:1079A0005069F5D0FBEAB63FE0F6915D52826E7AFF
+:1079B000FEC390B04BE6F775EA7C34CE052EF8A5F1
+:1079C00087A26BEE437E9C477D26FD6D68FFEB9A98
+:1079D000FB28CFF039A294779E567A66111D772C3A
+:1079E0007435367929BF4D5C77EDE33FF168BC7F94
+:1079F0001C2CD0F9C7F96AC336AB3782F336BC22E8
+:107A00007BE9350188F2FACCCF07C2EFDAC87EAB4A
+:107A10001688164E1D781FC56823BD09B4AFFB58E4
+:107A200076532BE415203EC79D33D4E876D88CE3FB
+:107A30005D99FABE888E5FE40FEFA706912EDA3FBC
+:107A40008290B0C7CDBFD938F66DA4EFCCB617DDA4
+:107A50005259FCB9C26A96477FF8F65F392C83E326
+:107A6000B757C77B2C6E09F1735A87240E833A45AA
+:107A70005B678DB8296FABDB62F506F1725D9B0C1D
+:107A80000EF25F27ED1C37D4B57DC2F8AC937C5164
+:107A9000691C2FC32DC5C511CBDBDE9B45F676795E
+:107AA0009E0C7351A56AF79C13E37D104DC1F1CB79
+:107AB00077BF3DEB87D447BC3B92C8AB2A7CC0263E
+:107AC000F4C624AFF0DBB3281E6EFECD672C8F0FFB
+:107AD000F74B90533CF0F99A2DEFD9C89F9C41C1C8
+:107AE00064A60B7E91DF0884E585B6B464F28B5CF6
+:107AF000FFBB4ABECFFB7F1793E37A3A6B1BCF786D
+:107B00007FF2774847CD9B76EF5C7AEF9377BA01A7
+:107B100071F081D22870FF8B073CE4876BAC418FFA
+:107B2000CAADB85EF3CBBB198FCB8EDFED11F98DEB
+:107B30002F4FEC1705F3689D4B367F9BD7B914FC8C
+:107B40008CC79A5FC8D5B44F734E81D9BB93E84DAB
+:107B5000659688B7ECF083B1F789F300A0FCFC03CD
+:107B60007DDF34F8B2CC719B1D6E4C9B17B7FF6460
+:107B7000CF12F62A08A13FD2B96A00DD2B9F831CE1
+:107B80003F378BE6B9AB5869A473225C7F50E79707
+:107B9000F415EF0B80A6C4C55955C7AFCEA17D31F2
+:107BA0003BF4DBFE5725C7D51AC53D71CF31DF3E0B
+:107BB000D86A1F225D89AD27F9BEE9ED5986FEC35B
+:107BC000CB1087A7C08E0F184F80FE3B2D57F41F98
+:107BD000237D5CE46A4C43BE7DFACABB363AD70AC1
+:107BE000E27A8611BDDDEF711FBCD91A8D37E60F21
+:107BF00074D863E781A4D7DBDE33E975E27DF4DF77
+:107C0000CCCF00A46994B77D608BCE227F1EC4F7D1
+:107C1000527DC1D20DF684F3C6185E4CE78BBA7E56
+:107C20001AFB9CCB4CF198D19AEDC29559897601FB
+:107C30003667273D5F34E72175D6D0AF893F75277A
+:107C4000ED9CBFD4B509FDC3803A3A0CF5E1A35DC4
+:107C5000875EBB05D7F151D89A3597DF96686F6B71
+:107C60009E42FDC5F132F23B85EDED671C4F19FEDA
+:107C7000E823175E1C93446FF17A52BD7501DBB3A4
+:107C8000FF577676D92076F6BB5903E284347C0D13
+:107C9000FCE589E597537C61E6AF615FCD76F393B0
+:107CA0004C2DA9DD04DDCF1B7CACDD7996717B3ECC
+:107CB0004F9C37356CFB2BFB31646BD48EB86D0851
+:107CC0007DCCFD07C88F71FFC07C696CB27527F24F
+:107CD000D37CFF32922DE723D1EF139F658BDB2BF3
+:107CE000F6E7543ECF6F26BF49765A5381E40833F6
+:107CF000204C7187D4F9FC5FE97DE6BC223803464D
+:107D000036F2B92EAC8BAFCF092B7A3D4530797D59
+:107D10004EB32D769E4BF7073BCF7D5FB7575E97EF
+:107D2000CAE508D62C4D4E5657E2ADB224CD237E7F
+:107D30009225CE774AB3C5BA8F650979B4C8D5FA0A
+:107D400046A3C897680F95ED5FBA9BCF83AD7A7D48
+:107D500006CE9CCBE7074ECB27C812D8BDA17A8EA2
+:107D600042FBC315963B4BB1DFB5E1F6390AE2C7DA
+:107D70003BD5B2A704FB2F6C582CFA575A2AAC08F3
+:107D8000FDC7834BE6CCA47D03CBDB3FA5F529AB38
+:107D900015A0FA91D296F7B87F97559C5F353CBBFA
+:107DA000B786DEDF20A12090FF2DEE7023D731E4CF
+:107DB00082BA9A368FB53D7EBABF260FF3799447C3
+:107DC00024CDFFDB2CF22B8E885B2BA1BCD2B7F12C
+:107DD0007B785F79D94A3921AE53EC838FDE333516
+:107DE00097ECEEFF85F7FF5B56F6E0EF3FF3D4B577
+:107DF0000B68FC68195419E72B57B42AEADB31BF2A
+:107E0000A6BCCD9043B922F85EE6B2713ED792EEA1
+:107E1000CB253C1D239C665F7ADBACD70FC94E8116
+:107E20000339CDD2B81BDB5774F9BFAAF383FE68C0
+:107E30005FA06F5FCE56AE5B816811C95796B7B62B
+:107E4000113FA24D0A6CA5FDD77D8FB7113E5FB7DC
+:107E50003978FFE8E6B4F5D62B90E47247D19D045B
+:107E6000FE37A55D7753BB2FDBDF9325E68DD0BCB6
+:107E7000B77C5F16F3BA1A53C97F820FF54AECD369
+:107E800070FC0E7ED42BA2F920EAD5383205897514
+:107E90004E663AE4B45D4CC7CD7641C78250497313
+:107EA0000FD231CE1EBA8CF22B7C7F94E4700B86FD
+:107EB0005B84E760217491DC5EBFEDCA2D627D8535
+:107EC000ACAFACFF7CFE7EE6499A2F80F3D3396AD3
+:107ED00040EAE1FE1EC5A1065561DF17C6EDBB3DB8
+:107EE0000BAD27CAC4FE7E33E51D53F5BCD8D87F41
+:107EF00033EA0D2676F9AB5C64B0E54E99ECCA39ED
+:107F00008CD7C88E99F7DD269BECEFD48E8FD82EB8
+:107F10005FEC3CD099ADDBE37CC8A77584E93C906D
+:107F2000025EDD4F7AE93C3089FEC79D0766660B2D
+:107F3000397DED79E09DBABDD1A84E0ED7D18F1312
+:107F400093DCFA8F2E82F24AAE476884F4C1FD6A50
+:107F5000BBC9FE1B381FF38A7A3BD9B331AFC06D62
+:107F6000B4DEABF5F393FED3C0F580E37A1C5C1F5F
+:107F700068EDB28642525C3DCA490BD7A3F4833701
+:107F8000C4F52B41BB1A647B3996EB4F5A4EEAE796
+:107F9000BD7A3D438560D93F5C0F61AE7F98E29E1C
+:107FA000242FACE4F31990260DAC7F9822DF2A939E
+:107FB0005D81A3429E17EA20E43299D6752E0240D5
+:107FC00029DA8457E2E48DFF9B981594B9FCE954B3
+:107FD000E2F529265C98E57F6DB61EDFE8F21FB456
+:107FE0008EE443B1AF360EC6721D89D55C47F2866A
+:107FF000850B366375241521D2B7094D62DFF8620F
+:10800000753CE63A1D731D4E9E3F914F0535572432
+:10801000DCBFACB13CA17FF9CA2909E38BD1A1C671
+:10802000F74B1F9A93307E58EB8D09FD119B6E49DB
+:10803000183F2AB428E1FEE81DB549EB5E0C9C8C84
+:1080400009AF48B8BFD1F9E4BB84AF963C59A578D5
+:10805000FECA8EFB4C7531D31817538C7D785DFEAC
+:10806000465D1D9581119FC7A3FC1F2BA6B8E9FE95
+:108070002A491B88036F24C87EFC1FC5C17A931D43
+:1080800030F4FF62FB373FD6FD849C5224519CE3C1
+:10809000C3B82A652AD5118B737B784BD4AB7C96F9
+:1080A000F2778E8B34C9ED856FD25B5589E2A07B68
+:1080B000AB348E83EE1D527480F60F7A7EE0F64A62
+:1080C000F903EB42CD75A0190EDF64E0AD11510745
+:1080D000D982869EEC7F708683E38C872D96DBAAFF
+:1080E000E3E87F225BD89F27B245BEF5735B783704
+:1080F000D901C5016A539E789E8A1F802A7B502E23
+:10810000EE4C10F561F0C6DA9985E43F7B466AE9EA
+:10811000543F8BFD6FE06525C4FEE4966685F3BC95
+:10812000D5CE27D99F942BC29F8C9385DF403FD219
+:1081300041F6F14DE97EAB88B38256924F810382BE
+:10814000EE72F6AF7C4E9C0E59D28A32AA4FBDE039
+:10815000B7B4AF104C876AA75A884FFD8B653E0FA6
+:108160007E8948427AFB6B46719D73FF85FA3F2DED
+:108170008DF2EBFEC58F9EBDBB32A697276DC9F36E
+:10818000BC8BEDBBD56C793495CE514E8E8484FA80
+:108190008C37B3457EF866B62CEA0C42EF79884DF1
+:1081A0007D4BBE184E4407A4EE352E1CF2E0A61FF0
+:1081B00054935C6CEDF382B4AF69ECE35FC8033BAE
+:1081C000A773FDB6912FDDFCBAD8D7BBF98BC47D60
+:1081D000EB8FB2C5B9C047F43E6CCBBBFCE3496E34
+:1081E000379042F0BEB27F3CC507D52A68E4F71746
+:1081F000F817DE7D14FBF3D64B1CEFD37D1A7F23DB
+:10820000CA90EE9F00EFAB7B91BECFB3053DF3A1CB
+:10821000DA4A74BEF6FDFA54C2D3EBE9627C54022A
+:108220006D6BDC7C37E8F3BDFEFDE57B294FA7F7DE
+:10823000D1FB891E7AFF3C154AA8FF1AF8CFBE5A17
+:108240003CF0BD3781CFAAD77B59C94F9642A8EDE4
+:1082500069B2AB472CDEB5C06D2493FD929DFD52F3
+:108260005F53F4C97B90CE3FD5FE75AF847CFDE3B0
+:10827000C2E8AF9FC6EBDFDD248386B8F838C32F92
+:108280007BE2EAB44F2EFE2495F889F1CAF69F925C
+:10829000DEEDB47BA9AEE3CDDA9DC3E3E3FA54CFC0
+:1082A00074073D07932EED3CADEA89C98CBF15DB01
+:1082B00005FE56FC66440EE16C45EA05DC89FEF6D7
+:1082C000523E279D2041D2FC783FE24D1BC17535BF
+:1082D000A021CEF67F2EEACAF71CCDA820FA14F012
+:1082E0005F16BF9E3D2FDD329AEB79DFC8BA243A84
+:1082F000496783687F6F665389F181AE270B3A33F4
+:108300002BF478729487E2B9DFFFE6EC7F105FF61A
+:10831000EDDCFE43D6914BE3C3C03A5A7527DB2709
+:10832000230FA3BA57CAD30E59D84F5E2DDFCF798A
+:1083300018D56970DE35A488C7A3C151ADC2BE8906
+:10834000EF24300E6EF672BD27EBEB4A55C42D4676
+:108350009E245BBCB98AF8C8E0C5A93C7F09D0FE61
+:10836000989B122BC35E611CE1962DBABD029F0340
+:10837000F3D3D1BA3D9BE5F15EDB22CE6B12E24F27
+:10838000EC57ED4A127756E33F8E3B37FB9B53D8B1
+:108390002F6D96CB28EEF03922E4C7CD71E7545803
+:1083A000CFFB0003E2CFE7FE7249F1E7F73CFF3D68
+:1083B000BFB3D4A3B1FD098F14762E1C19C2790E58
+:1083C000FE55907E0DA5BD003A07CD13AD4DEA1DBB
+:1083D000E940FDACF594AF7B681AC265A8E00FF5E3
+:1083E00051A450AA7D72E82B8A03BB15965FFF73D8
+:1083F000577CED772495A887E4EC2387A770BD739D
+:108400005F97D08FB60CEDDFA7529E8171E65624A0
+:108410003145E9B1A52759CFD3647F511FC21E91C1
+:1084200047393AC4B9A843F301D99714551D478970
+:10843000B9317EB147D8DDFAC36F16D9503E672DEA
+:1084400047DD74BE52B7F729372E179A33FD0F90C8
+:10845000FE2C3FF9F20495EBDCB61451FE1D8EBCE8
+:108460003C83E3B3D9C8DA7183AF27B0A9823E4217
+:1084700080864D99DC8EA27D15BC14888875F676B1
+:10848000346724DB1F08FCDB5B0769BD3B8FA570ED
+:10849000DCB233BB9BF520380F603BF2FB89CF4742
+:1084A000F37C0830A6E38A6A4D227FFF0B7D3D3BBB
+:1084B000F5FCB2F77399C719F38EE9982EAB88AB28
+:1084C000B248EB41AEE3EAB46B24DF946D20F8D3FD
+:1084D00099C2756181FDD788BC335D9C47B70D8912
+:1084E000FE91DE13DD67D7A84E35456D850C9CBF28
+:1084F000CD26FCEC2804FE53AED875E37D299D1BE8
+:10850000F92308C405D7E3A528ADF00D573CFF5368
+:1085100099DEFD1E11EFB40D89585CE4273057DA5F
+:10852000CA74C5E8047EAF41E7288E8BDB6CD1F7B7
+:1085300069BF1DE9520917A340D0099D23348A570A
+:10854000525471AE9EA26ADEA03490AEC05808614B
+:1085500070000FAF860B7ACE758443627D07EA42C6
+:108560005B891EC70417AF9B392DAE4F866C52EC4A
+:10857000F9139E65EB5A0A695DC20F2A4A98CFC764
+:10858000DD0B40A5F3EF14C5C77952CA7CD09A50D1
+:108590005E4E878FEF7B708EA6C9DC8F10FD2ADDC3
+:1085A000A77D9B34D53907E94EFB328D9F6BE8B62A
+:1085B00072DD79DDDF6F4A2BC3F59DB11CBC6717F7
+:1085C000B61F2D0C0FA773DA0969FEB7C81E3F73DB
+:1085D0006AD1BA3138FE2F6D56EF5CB24B3DC11FE8
+:1085E000D3B97DED13568DFCE2836FF447BE22F9BB
+:1085F0003E2BB15DECB38AFBD8D79AF07E43E707F8
+:10860000363AD7BAA6E36D1BED7FAFCCF1BF4F7AF8
+:1086100030A9A3A98AF836195A9B699F13ED21D76F
+:108620004B847385BDE87F65F8D6A6383EBB72F4EF
+:108630007DEFA8FF72D29B4E5D3FF7537C84ED5EC9
+:108640003D4EDB7BE0BBA55ADCF969100EF27EE003
+:108650006A788EEB3A8DEB7D216536E168F46B8E9E
+:10866000DB7C7138B3E5087DB7E9EFFB798EFF4B12
+:10867000D6DB03EFD8DCB8FEC09FC345E4AFC21819
+:10868000CF7D5D1D69C0A42F17EA8E4E03DB919D3F
+:10869000AF7570FCBDF33E359DF41EE98734ECEFF9
+:1086A000C5F882F4686FB1D0BBA657CF8FA5FDE2A5
+:1086B000F3FB965F4EFCEAF5580D7CCF18427AB476
+:1086C0001BD88E197A58467A28D1F77B62BFA78CBF
+:1086D000F04D7A67EB9EC37AB7D702A477886FC64E
+:1086E0003BE25BA538A44C45BCF3F323588FDBBABF
+:1086F0005FBE82EBD991BDC3C651DFC2F86A8BCC95
+:108700000949F87CA53572909EAFC4F7376931BD31
+:10871000AC9412EB7A167B449DAC611F7FA0EB6793
+:1087200078A496E6C5F14E594EC07F9C9F147DDD1E
+:108730008FDEBBF127EB36A0BE94FA2A2C1328DE7D
+:108740003926B31FD8AFC7C92BFE30E5865DE23AA4
+:10875000FBCF888E8B837ADCFCDCAA5CEE935FD047
+:10876000502EE3B1F55550BD7763156DC54D9ADDBB
+:108770007A88DA29D5E12A3A2E9CB6A0FB90F8C671
+:10878000CD379AF0D67EF05BA3B94EFAA41DE83B34
+:10879000CEF6FF8CFEF1095CFF3DFB91DF90342E9D
+:1087A00061BCA1C766FC0D86933EA9E7FAA968974C
+:1087B000AFDBF8EB6B1574E80D04045CFF9C8DDBFC
+:1087C000D605D1079EC8F15D9783F8FB22D77F5D60
+:1087D0000EF2ADEFF87F7AC89FEC7DE51D37F9E129
+:1087E000769B6F34E1AABD04F38824789C9263657C
+:1087F000FF5A3948BD49638EC8B78607611DE1A598
+:10880000A15D5643E4A77DDDD793DF781F5949FB6F
+:10881000DA4BA707DD942FD5EC3DC475FA463EBD73
+:1088200004F43FF9D659C4FF73B9223F5EBAC19A26
+:1088300090DF8E80888DCE91037E5763044552630E
+:108840008A3BEEE8D8C2DF8DD46E4B7CAE8EE2144C
+:108850008450DD45F2E3C61C7D9FA4144A294E4195
+:10886000DCF03E49F455D9BB15B8BEAA8BEAAB760D
+:108870005A049F9C0E6849CB88C52B23F27C4BC8B9
+:10888000DE2D31FC875EAF146D93F87B8A513B443B
+:10889000BE3CE5B4B685BF930AFAB84EAF86084031
+:1088A000BAA728415EFF94DC5208E2FA27A1792694
+:1088B0007D59DA2985989FFA772F0AFE13FB459B8D
+:1088C00065FECE6FB30499C5346F94F953ABEF1FB7
+:1088D0002EDF91787E51B7E9F8610A95EAC3A6F3D5
+:1088E000209D3FE6F39DA7E83F929CEFFC24478F35
+:1088F000E78AA028E1BBBCAE4BFB2EEF238A075CC6
+:1089000074F8080971F91E1D470DFABAEB42B25806
+:10891000378A82EAA36FD76112002FF3A91E714232
+:108920003880F542DE463D632D54DBA88EACBEBDDB
+:10893000E9309DBF2DD5E35A339E90A1CCAF657A27
+:10894000DD50CDE6C4FBB53A5F6A4D7C69F04B263D
+:10895000FA44DC7DA9F4A1E5FA0EE1A0769795EB47
+:10896000B9CFC1AD5C7F55DFBE85E959AACB6F2079
+:10897000BD415ECF325C0FE9D3A5D26B96DF3103E8
+:10898000E757C01509F29B9D7949F22B057539AD62
+:10899000AFBF4BE4B5FD5D25BC2F61E0C5FCFC2CF1
+:1089A0003D8EBE66938837CF765439291EE83BAAA0
+:1089B0007825C47DC5B14FDDF4FD4DF93E19E89C25
+:1089C000B4AFB3625D10EDE59EAEA13769E807CAAA
+:1089D0008F29EC372A8E9587528AA95FEE2CE53ACB
+:1089E000132D93F2009C87FD70DFD1A127CA384E6A
+:1089F0009F5949296AD3D17227C50B7B40EC6F4838
+:108A0000C72A337BE2FCCA7B3962BF614DEEBB0FE4
+:108A1000939DBA66B795F783AFB1465FA23C6C4FA2
+:108A200097E26DC27EDDB145AB5348DEBF91BC1409
+:108A3000761FEE5E9145E735F59D56D5CEF4DE7D89
+:108A400090EE077749DE61383EB0EFEAD16DB44F62
+:108A5000B4A5C24BEC35DE579EAE3D4AF5AE90E76D
+:108A6000E4BCFD9ACBACEC5FCFE43BFF752EAEAB24
+:108A7000D6B76516D9E133BFDBC375157D6D12E43A
+:108A80004AB48F7CE849AAF739F3F4711B9D075764
+:108A9000B51FE7BA8DC1FCC1D910E28EF3F6561BA3
+:108AA000E537F55B8C7E0F7F8F52ADC7510DDBDE56
+:108AB000E67E2DE50184C7CD7248C3FF3CB4EF19B3
+:108AC0003E1F6ED825EA3E2EDCDF26F17D03EF8BBC
+:108AD00074BBB51C34C6FB7203EF7A7D9481F773C7
+:108AE0003097EBB496EF7A84F1BD44C7B7B96E0AFC
+:108AF0002DB0AD2C4BE82BEDB799BFFFBB43C7F7AB
+:108B00001D17C1F7A85C1DDFA36014E1FBFC7451C5
+:108B10004F77FEF81027CD7FFE08EFBE7E1DCED921
+:108B2000EF1ED5E382FE88C567BB3236AEB7E313CE
+:108B3000FE0E3170B4DF467527B33A3F6679CCED4F
+:108B40003C3093F87D1DF8EB887FD7753A558A83C2
+:108B5000E7F6087B36A7D3CEE713D741B885E4DC28
+:108B6000B7FFF1960CC2CDAF056E0C3BB74CE7EBEF
+:108B7000B5653F9845F97BADEE0FFBBBEE9CC57626
+:108B8000671C1453BC3747FFCE7B4E58B7439B132B
+:108B9000F94EE7D424B7864E3BD79B5C0B3D36F2AB
+:108BA00067D7EAFED3EC27FBF29C2CE720FAAB61F7
+:108BB00038BE6E97A98E52E9617AFA3B6C7CDED59D
+:108BC00060F2BFD372AD09F51783E1D32CAFDB722E
+:108BD000757FA2CB6B6E54D431CC7945F6D2F94374
+:108BE00057647519C50B06DFCCF2EAD24AD3BEEE44
+:108BF000F7125ED2E37CA37F83FEFD5B586D75C5E3
+:108C0000E7EDCFE75AF473CED04F2B709D7749D064
+:108C10004D38C4FCE6867229697EB33217C73F5FC0
+:108C200078FBFA71F1F98D6FCB708AF71E44BB5255
+:108C300051C9F53BDD7C5EA8B4CEA573B0C02EABA8
+:108C400097F29A4087CCF14060973D64C179AF219B
+:108C50001C215DD59DD2D58423CC1B5A72D13ECD2B
+:108C6000A32D651C37AF03E3117C6EDECC8F197F1B
+:108C700047868A75F72B5A4EB23CC2C81F1A3E1758
+:108C8000F1AA71BD01ED008D6FD0BF4B6B3FF8D7DE
+:108C9000A2E2543AB7FDAC6821C5A9B9227F31E2FE
+:108CA000D528C6AB257ABC4275174B85E860E973B9
+:108CB000F7D9C87E1DA61FB6A0FA49D5BF86F261B6
+:108CC000D50F8D3FA240436A613D6A209D221CEE74
+:108CD00095C4FECDB356AA0D81A69787705D60EF4F
+:108CE0006BE21CCAACEFBD8BBAD95E9C5FE86A240C
+:108CF000BC2D2FDBB206230C18BDFF75B637A37F42
+:108D000067532D6A6C5D4DF4DD1DE7692D09F17225
+:108D10006F47B38DF7A1E3BF1B2E19181FD55F64F2
+:108D20001FEB79935D41FA39DEED3B22ABB42F8422
+:108D30007CFC657E3CBFF478A8FD600AFBAFBEE317
+:108D4000AE10C5FD7FD1F17846DF976F9A24333F8F
+:108D50002C93453B7AFF3325245F92871FEDFDCE90
+:108D6000FDCF5CE1E37DF490A823DE9158875D1F81
+:108D70004EACB336F81AD0F98A740DA7EF950DBA38
+:108D8000F62A3D6E6F123D92A4832C2F8B9498E7A8
+:108D9000069E95ABE3EB48713DB791DD3B69E88BEF
+:108DA00012F5901F7E2B5763DC34750AF95AF68949
+:108DB00016DFFF1DB15F63E5F70FB83F235847F794
+:108DC000CF173BB9BE013E0FCEA5FE3D25E2F7030E
+:108DD000EE79B97644FC3E1D48221F0F58A35CEF84
+:108DE00017386E61FA02C7FB3D435D6417B7CCA428
+:108DF0003ADA6B757B71B8C45943380FD27B736212
+:108E0000F32CC915E71B40EBCD8D7D5F69AC773541
+:108E1000DCC87C58ADE3EA3FF4BC1EF3A8F3B949C3
+:108E2000F2A8C1E2DF0B74EBF1D3F9E9DA89EF21A3
+:108E30000ECA8F2841CAD7F7BC911222FFDFB46F48
+:108E4000D99F281F0EBC69078A43EED9BF6C04D78F
+:108E5000E1FBFD57923D39BFFF8E2BB98E5112DFDA
+:108E6000970689BE5C8AA75EF5509C54BFEF55AE4D
+:108E700073ACDF3BFE518A9F305EBA96AE631CC373
+:108E8000F82B3F56C9F8DB73B432B3940807AF939D
+:108E9000E6AD3FA270DD63FD91CA17E7525C736CCB
+:108EA00006C74F46BC5441F938C54F478626C44FC4
+:108EB000A979827F7D075278FF438212811F189A19
+:108EC000809FBAF63F709C5187F62E1E47C673C529
+:108ED000790ACF332C4FC74F58F2313E768BB6AE5E
+:108EE000630FAF6FB935CCF26EDA6515F7DB446B03
+:108EF000D44907212348FC78912EA11CE6D842854D
+:108F0000946FBE502CF20DB33C9EC813E7852F9C86
+:108F100014DF19BF30DD3F22D9F7C6419821F27026
+:108F200049E777BB7576B2EF7977E489FD09772653
+:108F3000249C4B1AEDA379425FE6D8C43E95F9BE56
+:108F40003FCFF03FB08ECE634ECCB5AAC6EFB7E4AC
+:108F5000A1DDBD1E8C3FEFABF3B3E89C4BE4D50025
+:108F60003D33C91E7E9BF6F929FE9A24FCBAB1CF87
+:108F70003F6F333C20F6F96FB5925D30EA4BE6F96E
+:108F8000CCF157F5D534CF8DE8DF699E9B6627DE9F
+:108F9000FFF645E2AE0579BA1F1F0EC3455EE172CA
+:108FA000923F38D76555655E476868B2EF0B0DFB99
+:108FB000737895383FEA42BB486DD3A8D779DFEA8A
+:108FC0008503279F4C67BB9A0225C8E2ABBEFC9382
+:108FD00027D93C4D17F4757E02FE0C799DA53CA067
+:108FE0006CA0BCEECCB3E8DF259DB1F1F926343E90
+:108FF000649107FF2EA969D4672DA44F67F5EF5E32
+:1090000090BE227B9CDD3F9BF731DFBF6706448328
+:1090100078FFC0283BFBBFFA99129F1FD447843FBB
+:10902000AC9F2FFCE1F0F6792C97EFA05C7C5E36CC
+:1090300013AF515DAE21EFABBEEC9B69E493748E30
+:10904000D34438673B9DC56D7DFBDB2D7C5E897EFF
+:1090500097E2C21B2625CA6D04F81FC8C6FB37CF8E
+:1090600096BCE84106C8FDE65BE7B1DC6FD2BF8F76
+:10907000B998DC7F9BE7FF691EE97D77FF77C62003
+:109080008B5E18F54111F9D7864170BD55E72F0C5D
+:109090008D3E4DE765DE0BE7E97F7F3AFE3CBDC4C0
+:1090A000E3DF924776D5F2A5FB0AA0F97A7EB942B2
+:1090B000223901EBC5607AB5439F7F479E2ADE9334
+:1090C00025CE8746E9FD17ACA142FE9EA2ECD2CE8A
+:1090D000019B9E7D7E2CD9B9DE0347C6DAE2E47A95
+:1090E0006605DA07F237FB0EF1F78731DC5974DCDD
+:1090F00029DC4AD28DBA1F4DC4E119C221D9E7DD5E
+:1091000087AEA7FCF16CFB4D599216E767F79E708E
+:109110000F8B9BF7ACFEBB1898B70DFF766A3C9D92
+:109120000F309D67C3623ED4FFE1378D89BFDF6C8E
+:109130007C67C7787E7064239FD31B785640E0D944
+:10914000F83D8C0BDF55DA80BF7B0CEEB7737D45A5
+:109150009F355A941EA72F1F1A7244981566312BFB
+:10916000B9DE75226CA8E273024CDED74DA6CFEFB4
+:10917000C2B2A80F6DE4BAC5698DE025DC4AB0998A
+:10918000FB13668BF3F229D02D135DDF8428B73EE5
+:1091900050156A67508519B6931C6199C2ADB6F631
+:1091A000834EC257C4A3A4BFEF10A5A7C9E4175BA1
+:1091B000BF02EF1B78C5C1180425FD4E3F2B5FD8B9
+:1091C0007FAF53E863F4ACF8DD936F400FD33F55A6
+:1091D000E9667A53352D83CE4B763FB742A6FA9790
+:1091E000FDA04549CFBC998DBCFF169D0EE1ADE9B0
+:1091F000B1F54EA2F5AAB1FE940560A1F54AB04BB7
+:10920000ACBF1132E87C6C3244F83D5711C1B8DE76
+:10921000E9A029D4B7E517EB7C16F95B959EBF59F9
+:109220001C41AEFB49CD17B8762A2139AF92B7B6AB
+:10923000C38FD0F94CA958E744BCCEE7388D82EEF5
+:109240000BFE3A5FD8BB29106639430DA82FF28F69
+:109250002BCC54895F52C463A1DF13BB54BEF67993
+:1092600080E977DF1EEDFD6165ECDCCBDB99C3F5B2
+:10927000D0EB254B5426BA1C85A21E3A0261FE2E65
+:109280003392F87B67C5F9375E9E4F7ECF2FBEC302
+:1092900035D775EE086DE5BA9B0541640FCD5308CF
+:1092A00070DA13AB03B09684F8BE95CED955AE33C1
+:1092B000ADA07C715FB6FFF2FC6CAE371DC6932982
+:1092C000A1F1D5A931BC2365FCFB3B4E486D257B44
+:1092D000D4ACD7D30655B75ECF54C4EBD0D0CEF3C1
+:1092E0008F4828A2AEFBDE2A517F7AEF90FD5CE723
+:1092F000DB23812A15D0F9FF7EAE03A61F86B316A5
+:109300007CCDF97F96FEBB0F25FE372696EA461EDA
+:109310009F6B3E95CAF5AFCA0C9F4675BCE67AF1C5
+:10932000D296F10FF5705E6AD06BAA1357BC7CFF22
+:109330005EDDBE363BC4EF0049ABEDAA348DBE7F87
+:109340005FC1BF63D54CA141257DF7BE829FA73A7F
+:10935000662A02ED4DF3DF44FC32FF2E15C2ABFF4F
+:10936000059A376D38EFF72593C734431E968175FC
+:109370005228875B49BE46DDAD516F4B80A0753BDF
+:109380007DE277F054C409FFEE1F42C94EB8F4994C
+:109390007FCF43D4FFB6E8FC47BA7670DDA7437CA5
+:1093A000A76D7CCF6BE69B81DFFF02B9D77EA25011
+:1093B00053000000000000001F8B080000000000A8
+:1093C000000B9B22C3C0F0A31E81F9A551F9E8F858
+:1093D000049A3C0B0303C34F205ECC835F1F2E1CFB
+:1093E000CB8260BB883330E88A3230E801F1142048
+:1093F0009E0AC49F81585B8C814107887381EC3C35
+:10940000207607626BA0DA2F1C0C0CDDC20C0CD38B
+:109410008078A130AAB92F1821B41217038329101C
+:10942000333263B77FAA1A03C3011D043F5D9781DE
+:1094300061AB3E797E19C5430F6F7344E51FB5429A
+:10944000E57FB06160B07742F08F5991667E35500C
+:109450006F8D136EF9A36EA8FCBD1EA87C0B34F9AA
+:109460001D61101A00FB3B7C21B8030000000000C6
+:1094700000000000000000001F8B0800000000003A
+:10948000000BED7D7D7C1CC59560F5C7F4F47CAACE
+:10949000471ED9235B323DD2D8964186B62DDB32AA
+:1094A000B6714B06472424194CE20802B9C136AC08
+:1094B000B3E1B809770B0EC1D1E8FBC3B219192F7C
+:1094C000311C81417CC4102E281F9775127219031C
+:1094D000C9CF9BCB651D4238270739A1F8D87C6ED0
+:1094E00074EC19CF5D08DE7AAFAAA5E9D67CD986DF
+:1094F0004DFE38F9472AD5FDAAEABD57AF5EBDF744
+:10950000EA758D22BA48EC2242CEC2DF6642DE7294
+:109510001142D6CC96A976234B5A68F934317AE9B0
+:10952000A34BB46CBB40CB15FE4951D009B92C9C60
+:109530002644242436F1301129DC509D4246A28471
+:1095400078F46D55C43FDBAFB3ECED2224BBACF82F
+:109550007BE9F9E1881EA0FD3DB5B6D3A4FD0C7DE5
+:10956000A5B5D36C9E7D5F0B8352FC1A08C5A686F9
+:1095700090FEFAFB89182664908EBD8CFEA7DE93C0
+:109580002071DA4EC90E137D05C085105EFDFA0903
+:10959000F166FA7CD0453A2768A91E4D657D14EF27
+:1095A0004B9FD35649941E8F6C8ABFA5754F44CCF0
+:1095B000A4808EC841ECF734A50B867AAFE8590D2C
+:1095C000F4503A365648CFC662F43C974A013D976C
+:1095D0001DD557E6D3A3D6317AD4BA1E9CA7D31192
+:1095E0004A4FF442E8F90CD233C8E91974D0F34178
+:1095F0004ECF768B9EDA01A467A09ED2431FB9EFAF
+:109600004991388557819E00C0D9E919007A9A0B93
+:10961000D0A3FE79E8F92B2E6F49A0674D797A9295
+:10962000404F4D05F4F8D344A3CF3D4430279AE78B
+:10963000E2E5E17C5CF1F5742445FB1DFE9384F3C7
+:109640004C576464DB8A59B8498ED7F7A203914915
+:1096500090AF25F74708ED6FB85E407867BF0F10F1
+:1096600005E1B53AB31BFABFF888BDFFE17A86AFD2
+:1096700005FF7B3E8FBF2712B65BE08F0F437D78DF
+:10968000C9374802C671A5231AB48BB276FD4BD6F2
+:10969000764EFA0BB567F40CEF4DA13CABD9CF2059
+:1096A000BFFEA63E4D745AF71C4910E0BF1261F888
+:1096B00058ED295E845C0E64DF699A0C3F4216D235
+:1096C000794ADD994DD1F162E9DBD538E5C7706D96
+:1096D0008F0A740FE9073B416F9D8E29448A025E11
+:1096E00085F960C9C56632AA36D0F9EC7D59324693
+:1096F000C85CB8140857CD6C5DF68B24DB44F0EFE2
+:109700002C017A1238FFFD4BEE47BA15A06B05D03D
+:1097100095243A7DFE2D2E3FEEAFA708C895AAA747
+:1097200022A91573C71902FE3743AFE9C8B63CFA40
+:109730007F6ECD2F9D57C7FC225F1E206636057CAD
+:10974000F1D8E7CD2AFF9EF3FDB2BA14F2B7DCF8E8
+:1097500073E967E3FF1DD1B11FA2A623F1C02C3E20
+:10976000C3AEC91E906BBA268D2728C8A5749CB6B7
+:109770003C7E3BC79BA1534EDBE4F81B9C4FC39E32
+:10978000E9E7F3FB73E2F35D0EF75DA26169D17562
+:10979000E951364EB9FE7F022CAE0178C7BA92531A
+:1097A00036BEDFCDE12F7BCE0E578C3F9F9DE14F24
+:1097B0002A02F268AD47F833E713C24506FFFC6B97
+:1097C00009590EFF8736F9C3CD9377C2D27A259C0B
+:1097D000380DED6F23898BBC8D74BDB8125F847218
+:1097E000AB6CBE85FD12BFF6C6255CEE24D4036CBF
+:1097F0003CDA3DA1FD07787FB2D041089567772B11
+:10980000C98C50D4AE925ECD0A949F070931166878
+:1098100079FBFA14DBD7D76B992DB09F6F90292174
+:1098200074BC2AA279A004F82C850BAEF11B742419
+:10983000E2261FAF8A17901B4F0B4979AAE8F8ADB3
+:109840008A6D5D78CC0401BD108890AC2748F58DF9
+:10985000100823FEEBC83A86BF2E407FD5B2DE2D1E
+:10986000D371A498688CD3A7551BC9FA1D7972A827
+:109870000B4C7EBB63A208740D50FDEFA64B325813
+:109880004FD73BAC8708B5370AC8ED8C7ECF49244B
+:109890003B8FF69B13487635ADFBC9FA046D97767E
+:1098A00093F5A7705C628C1790B3ED029B5721363D
+:1098B0007DF62CDA0524F33EB40BD2B88E9558DA37
+:1098C000847D403583861BA6FDED7B995E938909D7
+:1098D00072128AA5B355F05E5F1A057C17C492E434
+:1098E000F566564EE5E1ABFA5311B49FA24B859E47
+:1098F000BC7DEC18959FA93C791BDACBEC80FEE887
+:1099000000D7339F44FD69BDFF04E79332499101BD
+:10991000BA7425D320CC95EB21A1B09ED8C9E98596
+:10992000BF2BD7DAE5559ECFE5950EE19609CAD74C
+:10993000E0532403F8524E3E7F33AD5FF2A24A4615
+:10994000A87C35931322C8CFA5641A4B8368129460
+:10995000AB8881650B8963F987362AF7B4BCCDA43F
+:10996000F2DE80F2FF51818EFFFBFAC4B2207DEE61
+:1099700089A52E87FD85CAFF76784EE5440079AA31
+:109980003649C1FD3224B0F53A266B1E801B3309DF
+:10999000EAC743426F0AF689216E270D79886D1D4B
+:1099A0001FE0740FF132144B9049985F3A2FA0D703
+:1099B0008F456FC575EC96597D80CE0BCADD26B6F6
+:1099C0008F39F150615E569CFF3C6CFFF3CFC38032
+:1099D0005053701E06611EB60B4C7F2ABF62E39780
+:1099E000A00FF7E99DDD8F22FF9553E7066FD1BFEA
+:1099F000D6A137D7713DB7814C2F96A91EB9DD9DF1
+:109A0000556401F1FE02E0FDD6CF4E7C02E82193C1
+:109A10008965B04F51BC1F16504F26C9093ABEFC8C
+:109A2000B294013F45F45DA3264AF82944A3FA4CB9
+:109A3000E5FAAC01FEB74E7BC33757FF2E9DF8AB5E
+:109A400093686F10353102FA69535205B9E8ADDBFE
+:109A5000A6821C0DD6D13AC84D445185CB68E92762
+:109A60001D207F96FD3110D931140D83DD63AC8547
+:109A70006EADF1B7441244C0E78979EEA8FDF92F25
+:109A800061FD6B898844E95332EF5381CE7E6D9B33
+:109A90009AEF7729FE4444A1723808E3C1F8AEE496
+:109AA000F1680BE84FB2BA07F4B99624AB41BE2374
+:109AB000ED88E796BAB80AEFDD9155C4AD038BE3A4
+:109AC00068570D84EDFEDC60DD1DE456844F92374F
+:109AD000FC73ED6BB73F4994BC7D02C691F2E6D9A9
+:109AE0002D27B340971429AC77FF07977F518FE359
+:109AF0007E43D29F37552AF72E2E03AE08F9997070
+:109B000069DE3C85F3F61D3A4F031EA3B3D0BAA419
+:109B10003B88BD5F4320EADACAFB9DDD6FF9BCA735
+:109B2000D70D4DE2BC07D230EFBD54EFE3BEFA6A69
+:109B300020F30425A17B53F21178EF4AC9A4278CA6
+:109B4000DD34C13E779774B101F27700F846378E65
+:109B5000D12E15CB912E0DCBA1AE08969FF77DEEA1
+:109B60008B93B4DD9E945B73831CA4EF7A16FAA3E7
+:109B70005E777C04FA0DD3FEA15F59D59ED0A0CEAE
+:109B8000F61D578C95378A8C8F55A217F16D119958
+:109B90001DAE1313E525AD95F6D3AB5AED766EC029
+:109BA000F0CEAE07FA9FAFA9DA56F7E80B6DF0CE0C
+:109BB000F5F26391E90D971C2746339485F5F85922
+:109BC000414238495A390DF687BC4041BBA05FB0CD
+:109BD000EBED8745B6DF3D26AA4867844CBF7096FB
+:109BE000F2C3A58968F704430D1359E04F8D622C29
+:109BF000A145D035A95517188F84E5DF4DE6ADF3A3
+:109C0000A7043326FE05F0690EFDDDED36B9DE272B
+:109C1000B2FDEE2C5F2F92DBEC043D13A1624850A5
+:109C20003EF447810FA26FA3D144F9D01F5274F0C4
+:109C300087FABAC582FB8E930F52D58D11D08F4E05
+:109C4000BE7F97CBD1339CEF9BDFFE30EA89FD9A34
+:109C5000D891F103DF4E74809EEF6B114590F3BFF6
+:109C600018FE39E8D833C3BF193A906F7D61663763
+:109C70008F6A547E603D8799FCE824DB81EF0D4AB2
+:109C80009730972E27FFDE6BFA2CBE5785C478A637
+:109C900019F09B8E237E1BE582F8FD6BF1DDC2CBB4
+:109CA0003F835796E165FC65E0F594901887F57D54
+:109CB00080CBEB01795205BD10B3E4C6C7D6D15CA9
+:109CC000BD24D8E49DF6F325E8E75EE887C2DF2BE4
+:109CD0004FDBFAB1E002C007B62EE26C5DC87FD65A
+:109CE0007561E135C2F1D64986C9755361B97EAF58
+:109CF000F1B2F6D31EDF1504F44DC81F47FB7B817C
+:109D00003F9E057EF5D6283AD83FD451C2FD1A9B16
+:109D1000EA797E52CDF608C0F707B6A35DDEEF8A7A
+:109D2000A39D7EBCE61BE6CD94AEDEB7AB88DBA080
+:109D3000FE80EF8AE33AE8C5E312FA6BBD6F372E77
+:109D4000481698671FC4C728FE5EC00FED6A65C637
+:109D500008077C7BFD54F1D17EDE6C2619D0A72E3E
+:109D6000BF1901BBBB77856AF420549C007F7B7CC4
+:109D70009F684D34CF6DEFF30F7C5ABA74761CFA9E
+:109D8000279C05DB97EEE1E0C7237D82ED7D413C1A
+:109D9000CAD55DB3750DFBA7755D85AE05F36CE3A4
+:109DA0002CDF292D4D32EC9BC46BC0FCC7E21D3D5E
+:109DB0007F043EFDBD847AD0C99FBF93125E69CDFA
+:109DC0006CDD154EE0BC59FD5D5D23A31E95EB488F
+:109DD000C62DC0A8F10EB06F7BEB448CAFC9FE6DF1
+:109DE0005525EDEEBACAEC6EC2E31E963CB4FD8A70
+:109DF0008DEB3598FE0E90490271952AC2E21A2128
+:109E0000A20B04DB1B421C83251B319E12F6BCDB1C
+:109E1000FDDE88FD0AE61839EB3B877E65DA6FE3E5
+:109E20007BD06F197C3DE421EC97AA87F0D979B3F8
+:109E3000FDBA22497C48DE3E7B565A4B5813FC4BF8
+:109E4000A07CCBA281EB932C0C1A4FD0A23F7C8735
+:109E5000CD9FFA88D4608B9B2ADAC0A785202DEB92
+:109E60006E3327F3F483737E3B6120F02FEB7699FA
+:109E70009315E80D30BB0BC5A5069444A61BF6EF61
+:109E8000C57E8C2312398971E141A17A15D8CF168C
+:109E90009C5CA76401AF408B99027D31384F34241C
+:109EA00003FA1D3D01FE0091AE311225E24B729D79
+:109EB000FC9B7C7AFEAD1408239E3CCED55B46DE2F
+:109EC00007BA4A9F4F288A9128E4CFA42466BF2866
+:109ED000DEC2EFAF54DAF74A6BE6F22D0DBCA3CF2A
+:109EE0000743D4E5BE8C890FC8815CF7FD93C0871A
+:109EF00081DAAD9152F4128DDA39797E91A19823ED
+:109F000052693C0E14C283F8A9F0AC2F310E9F5F4A
+:109F1000ED4A83C53B4029C2791CB7CF28DE416199
+:109F20003ED3D3F0B7BF653C0B7134D7CD7E13E67B
+:109F30004F328F1089C2FFA85622422BD4BDAF8B5F
+:109F4000389F1B0DD4574DCCBF33E93FA023B851E8
+:109F5000B1ED5BA03F67F6AD28C8BFBDFEB4648F0E
+:109F600067F6761D25BF5C328B3F7D64168A17CB62
+:109F70004AFB44617E5457C48F43545E08959783CF
+:109F8000D46FA44C2169EA3742FD00F51B09FA930E
+:109F90003A967D5D4D58EE83A6EBE1FC2C39148D8D
+:109FA00042BCF4F1C82D14E410E80E3C57F1B6435E
+:109FB000FC7CC4AAD32702D4F939CB0F7BFFD80687
+:109FC000F198110FAB1332DD66DAEA520FC4FB478A
+:109FD00002ACFD2F257F3B9C471CE2E7484436D569
+:109FE0008FE6F9FF39C98574800DC4DAFFBE1BFA0C
+:109FF000F3C8BC9EAA477C66EA948F808F4765F5BC
+:10A00000BABEC5D83FAA003A5EACEF2236DE126671
+:10A01000DF93E66D65F8D883F27F3D1CC201CDCD9C
+:10A02000D570A84C14C320B0DD1C0A71BC2BEC8782
+:10A03000C809B6DFF1B852F17553665FE378949BB7
+:10A040007F027E29C42FA81E4EC1B83F2DBC4FBF32
+:10A05000DBE31E729D1B5F94D6E9944C59FCB7520A
+:10A060004293693D604E64A3B41EBC269BC2E55B6F
+:10A07000E1B8BF93341E0F4DE0FAB7F82C6BCCEE6D
+:10A08000B8D2318FAEB089E7921E3F5B7F95E2BBBD
+:10A090001EC6C9EB873CD35E1B0F146F571317679F
+:10A0A000ED2DFADFBC0EEFACBD46FF0B99D5B67AAD
+:10A0B00055EB421B7CC068B0BD776917DBDE9FEFB4
+:10A0C0003C5DEAA0A3D1E21FAF479C74562C77B247
+:10A0D000CEF7B914B31F67EA7C3F2E577F7B99BD3B
+:10A0E000CEFA75931BAA987DC3EC987F43388C13E6
+:10A0F0000F234FFF4A00C7EABA2810CBBECD36CD9A
+:10A10000EDBF57FD1CC6E1CC5E9978AE981BA74BFE
+:10A11000B52731CE96EA716BBD618CBB619C6D0F2A
+:10A1200035E4DDB4BCCD95D80DF27BC6B33843829F
+:10A13000D06F721DC4AD7B1DF104A73CC51EBABE15
+:10A14000E07999550E75B1F89F5557EB0AE701DC98
+:10A150002DB3F3FAEFBB1277031EA01B09C66909E2
+:10A16000AE0397CEF6C763D1ADE4D7E8FFB3F331C2
+:10A1700085A44E36527AD2D45F1BD1816EB64E86FC
+:10A18000A25BD5187D3E1612B94D378DF653BA6DC8
+:10A190007E2DACA72A791ACFEDAA6285F1B95716A0
+:10A1A000F9BCDD54923EE77CDC048156DA6EAC5E8D
+:10A1B0001091FFF562E6098847D589B8AEF79BCACA
+:10A1C000A370D4BEBFA5FA7A8CA79B8A28211D59FB
+:10A1D000B5D03AECE776532F8F9F1EA8637EEBB184
+:10A1E000B6375438AF3960B4633E809CFE11B61F59
+:10A1F000E4FC4EAF9CC238F96091F3971E99F9F9CF
+:10A20000BD016F67A6E0FB20BE4F47DB9E7F00E8E5
+:10A21000A0FAF709F4CF48ED2E4A87666AAB80DFD3
+:10A2200063F5A6F86B90AB4D22CA5910E272129CEE
+:10A230008BDAFDE7B14D229EB3A635BF01F6FB696F
+:10A24000F34D821B91ACD5C2F962D5AB1B34DC2B2C
+:10A25000A9BD539B67E7576D4CAE83F9B2E8729383
+:10A260006B0BCE87B0784F02F879D72AA2833FE6EE
+:10A270005EDC91FD02EDF7CC7AB706AAE0CAC09584
+:10A28000D9EF803CD16D05FC6477D8CC82DDE4E960
+:10A29000F4119DBE0F4626D08E52231231C1AEFA64
+:10A2A000BF12CE17D51948977C68FD89CDB4BDB2D1
+:10A2B000495C80765933DB6F34FA0FF61B3566B78D
+:10A2C000AB245716FBBB77F2513C57561C76954C86
+:10A2D000F2E0C1EEDAB4EDC38D05F481554A934145
+:10A2E0003CD725D28D25ED6CFFAB9FFC8717F3F88B
+:10A2F0003E253BEC746EBF59FD14B3DFCE74EDFE0A
+:10A300008717A92C275C2C0E2A2BE66F605D4EF177
+:10A31000F3C53147DE4DC2C5D6CB19BE8E6166C1CD
+:10A32000DF06FF18F8D577D576E66711C3E6C7D004
+:10A33000F57E46CEF3B3ADFD2E6D96F62766F35A45
+:10A34000FC9E5889BC966BE584EC2A91D762ADD708
+:10A35000E14D2689D0F91D0D914C0FCCEF6693ECA1
+:10A3600004791588D1A331F869EB1C250A72781598
+:10A37000D905EB57970D3887EC6FFC1075148BE3FC
+:10A380002B87EDF2516E1EF738E67191CB6E87BBCD
+:10A3900048BC2A1B853846E47AC0637F5831603D4B
+:10A3A000BAC41B77EFD0E7CE2359C7F4862B9C2580
+:10A3B00085C6B5F879BBCB5CE68238BB629C4C8025
+:10A3C000FCB72BE8F73AE16F72F13C962891C13E59
+:10A3D0004BC13A81F5DB61B2BC31414B3E6820FA9A
+:10A3E00071DBB956EC2DCC677B4822C9791B09B9C2
+:10A3F000CE15657AA66D3BB37B3E40042904F00977
+:10A40000DCBF6A4D4DA07D9361CB2ED36E8E5C9BDD
+:10A41000A727AFE3F239FB3E11F9A8EDBD8BE11997
+:10A42000E076B3B63372ED8A02ED4385F5E407B802
+:10A430005C5FE7E2F6446A27E605F5EB37C681CFB5
+:10A440007D9B4D6317682D9011C847F1139B7D4C80
+:10A45000E5FB3AE0A7153F92B53896963D506CFE65
+:10A460009D76802B62CF3BA9F4DC3676E8FA92E346
+:10A4700038F7672BBF0D345F3E9F5C9C0FCD7CBDD2
+:10A48000CCDA4B69BEDE0DCC079214330171494919
+:10A4900020367B6B8CCB8BE465EF9D7850FFF94EBB
+:10A4A00058A752D044FF9AF85B98DD261BFAB505F1
+:10A4B000F0B7CE391FE379BCB1F48770FF1B0DB53F
+:10A4C000E3BED7A795D61FD6BEBA995CA342DCAE31
+:10A4D000BFB8FE18CDD71F4A58B4AF63EEDF53FAAA
+:10A4E000F5427CB6F814E1F1D2DEC0F648C9B8A056
+:10A4F000E37CC550CC07902FC5F9F685F3E1DB2846
+:10A50000CFABDBDBFFD2F33C0FC1AEAF5716D5D7D5
+:10A51000FFC9A64FB9BE7E0FF9FFDCBBC1FF4AE3FE
+:10A52000309E3D927E6A1E55F1720AE919D60FA639
+:10A53000301E03EB1BEC80741BE62B901841BD080A
+:10A540000D41DF797413F9E6E57126A5CEBECF483B
+:10A5500061AFAD1EE94C11C857837E816ECF1E05D9
+:10A56000C7B5F84D6D16CC27B3EC4B584EE08F14A1
+:10A57000CB4FB34A2B7E03C73867719FFAEC71E06B
+:10A58000EF693FC1FDA138FDF671221F8997D64FB3
+:10A590000E78E297F5370A9C0BCE6D279337F2F4CD
+:10A5A000DAFF71E813F3C8CD9DA847896840FCB273
+:10A5B00037B29D2428DE0384E9932128D7433EC97E
+:10A5C0002A0DFCDFEFBB74D65E67FE9DA8F238BD96
+:10A5D0005E99BF7717DD870AD93F4B15661F9FF934
+:10A5E0005CF20F9097901A1174D8DF4E75E5D07E0B
+:10A5F000DA915DAE405EDA72653EC2ED381455B652
+:10A60000E4ADCF1D849DFB5344947C3D6AAD3F2552
+:10A61000ED7E1EE89C4AB3B8C654FA9FF15C7FEA0F
+:10A62000B09401A64E0D5D5772FD9CE27ADB823B31
+:10A63000755832A1BFD490905942DB9F92CD60C132
+:10A640003C009261E7C1BC7E4B5AB2C9E599BD0995
+:10A6500005F4CCA92E55F8259D9B5B814E8AFF8E73
+:10A660007454019FAC1C5DF314FB7C5A74F643BE1A
+:10A670004274367FA73FFC26D27B9A3E974AC4930A
+:10A6800046B89EE80F17D6275E7EFEEA75650AE794
+:10A690003D38E8F535D9D7A585DF20CFA718D418E0
+:10A6A0005E831111E761B0AEB41EEBE3F360C1F558
+:10A6B00047D8796BBF1C572BC1C7A5D9F129368E56
+:10A6C000BA71A203B6F92A92E8688F227B5F8238BA
+:10A6D00002860E75F09F9E3A762BC4816FF69B42E0
+:10A6E000041E4E67BF43EB0BA8BF03F6A966668442
+:10A6F000C52D90D72911881B3F947C33FB1AF8A3F2
+:10A70000D4FF817A484F86DE077A289610605DED87
+:10A7100007E58F9D7FB0B7AD99AF3F5AFFD440FB9F
+:10A72000168843CA24CEE319A20EF97AB8F4C5E21A
+:10A730007A02B4E759F76CBBA2743AFC2237D956B7
+:10A74000DAFFDECDE053F41FE89D050E3F2BD46900
+:10A75000B7BBAB1CEFC7B8BC16F32BDFAD71E693EC
+:10A7600097543897555B442D03F0241982FD3678B1
+:10A77000A34CC08E9FAF6BDD10E22BC7F77D84E545
+:10A78000B9C11711F9EBEF4985D9B18B6E7F5C80A8
+:10A79000FDE93478D92BA19E330AC9AFD3EE1BD281
+:10A7A000A7309E38404E7434823DBF4BC4F3A4FDA5
+:10A7B0002D0743F9EDBFC7C7999D7FA2CB6BF1541D
+:10A7C00016FD79A5453461DF3ADFF977FAC9E5E688
+:10A7D000BF76B7DD2E3ED779F93120BEA6FCFC5FEF
+:10A7E000E838D6BCCD5D1F4C6F2EBAFD458CE38C8E
+:10A7F0001AA5F5CDDC797B09E72DD842CC42719CB6
+:10A8000057F83EE6CCEB53499218909FF832DB7F25
+:10A81000A4C6B591F112FA478A39FC0FDE4FEE1645
+:10A82000424EC07E2BEB65BE879B3824D37DD3B7C9
+:10A8300067C3217935E4679998E735DC65E2F399D8
+:10A84000F9778B1C5F81886BB95ED1F1FCF3908C3A
+:10A85000F68648CE421C846844B7E48E005CC7216B
+:10A8600019E3313ACF23A0A0F3A11D41BDB4129248
+:10A870003D6BF09C1EFB818E581CA693D569439CB2
+:10A88000279769225E725ABD83F2739F87D7755EE0
+:10A890000FF1BAC6EB515E2707B1EE53681DE2F225
+:10A8A000AEB486752FAF4779BD9AD743BCDEC0EBF7
+:10A8B000C241ACEF53587F237286F5EFE5759DD703
+:10A8C000AB795DE3F5065E27E36C7C37ABC37E882E
+:10A8D000751FAF47797D1EAF8778BD91D78571AC65
+:10A8E000179B3F6FCC44FECECE7F07E31B21DCDFFE
+:10A8F0008C3BEA9DB3F079FE687F972EE49F1FBAE8
+:10A900008AC49F56B9999E996E8B639E12F5175211
+:10A9100053F9E78E91C2F26EF27633E7E6610A5799
+:10A92000307EDD5D705D548ADFD6F3C4EF23FF4ACD
+:10A93000F8DDE0B6D63DF3CFA7DB0CC4D3D99FB387
+:10A940001DD85B24EF9CDE2B675210AFA13612FAA4
+:10A950003B2ED59ECF7A979B9D7376BB593E6B2F2E
+:10A96000C76FBA8D9D3FF42FF166C685B971C6BF1A
+:10A9700071B378C20F2C3CD509F47B7C39BA62D113
+:10A980000F627ED470ACBD4CFEBAFCFFF2FD656771
+:10A990001CE49FE11D1DC7EB2FCCA7BB66F4CD8D3A
+:10A9A000A9290AAB7AE873F067B470A42E3F6F9AB6
+:10A9B000BF278228A17E799BC259F92212F6CFE2E5
+:10A9C000C5752C5E2C71781C27CABE633057C13EFA
+:10A9D000439F37F17184B9FD3ADB65DDD56CBE3834
+:10A9E0003E567E8A449EC37E66F091E3C82FE7738D
+:10A9F000C843D6FC17FEFC42EB2EBDC8786976FE34
+:10AA000052AEFD17B9BCCC91CF22F3FA1FDD969D53
+:10AA10003261423E902547967C9DAF1C5DB09CC044
+:10AA200086D4525C4E522489EB46069773E5B9CB27
+:10AA30004B0139C9E6C3D7A8217E9E6FA0BC507CCC
+:10AA400064945B8DE153B32A8CFD09B0C697410F26
+:10AA5000BC0E7CA0F45EA286381F589CC20BE78C0B
+:10AA600079ED297188AF20095CEF33B8CD2A5BE717
+:10AA70009BDAEB18FE84F7EFC097F6A7E6F727916D
+:10AA80003A879C33BC3FA6B2F9A5F0F89DDF9CF154
+:10AA90006501F195483C25D2769FE2F04EFD659523
+:10AAA0007B397EC322D9CDBE938C93FCEF2A7DAA3D
+:10AAB000C8BF7B64EBCCA99F5C2057ABCF5FAE2AAD
+:10AAC000D5EB356AE17D87EAF92688F715DB774E05
+:10AAD000AA33FB41139FB7739AF7DF811E5A333BAA
+:10AAE0009F95E27B091FF75CF13D3517DF8AE4ECA7
+:10AAF0004DAE272AC56FF379E2F79203BF774BAECD
+:10AB0000DFE6FB51A5F87FEC3CE5E18773F95BD10B
+:10AB10003A12D573E3EFA7CE13BF5F38F12BB26EB5
+:10AB20001595F12B45987CC8FCFCA552FCBACAE3EC
+:10AB3000C7F3C5B6F69931B4D7D01FDFAF6EED4B72
+:10AB4000C9B3F89984E9F5731DFFDE8AC7FF509FEA
+:10AB500029CF8EFF05F543B6F165D94061AB74DCB2
+:10AB6000872B1D37F5511BDDCF0C7DD436EEF9F266
+:10AB7000FDCB158F7F938DEEE7866EB2D3ED373028
+:10AB80009FB8D271BF739EEBFD371C5F9FAAD9F6A9
+:10AB90008162F6FBDBDCAEBD45D56C725C0CFE4D14
+:10ABA0006EAF7CB042F853BCFF460B9F32F09FE182
+:10ABB000F87FA642F8DF717CD65788CF0FF83A2C81
+:10ABC000B67F7A39DF7DA023F3FC9A0BCD5BDAE503
+:10ABD0004E081E38E7FC7A177E27F8A6AC6A10EFFD
+:10ABE000241D04ED71CFAB8171965792E2FE7F2256
+:10ABF00025303D8CF12D57D8B09DC7597E972CC775
+:10AC0000CD42E76D210FD37F826674B2F5AE10C8D6
+:10AC1000432A06EFF3148EBF549169CC3F21117E75
+:10AC20008EF4F6757AC17302398E792D92A69071E1
+:10AC30003A4E5F68BB9E9FB71CB3F08998888FA27D
+:10AC4000317C14D9300BE529D77BD8BC5AFD58FE8E
+:10AC5000A1109926EC1E07865FBF27DE0979E2A9BD
+:10AC600090827CEA0BD8CFC7AFE7FDBC9FD3D7E774
+:10AC70002A9D27D63EBF15F3957A5B59BE924E0C9E
+:10AC8000CCEFECF397BED760B48BC5FF4778FED30B
+:10AC9000107C3F0ADF13C3F7A3CBA0FD57F13BBCE9
+:10ACA000D3CD62C9FB7102863DCEEE6BB27FCF631E
+:10ACB000C5E53DBAFDBB1E77C4FE5D8F6BBE8C79CA
+:10ACC0005D7D7E763E500E7F2BEFDD821B9493AA36
+:10ACD00056904F19DBB9803B62C7F7BDE31F6BEF9E
+:10ACE000734D6885F07AB7F8562CDE30436F959235
+:10ACF000CC30BD61CBCFE8E2F2E5AE5293A097A98C
+:10AD0000DE2DF2DECBDAFBE3981FA246E23AC6A3C1
+:10AD1000F93EA0C27AC8E3D3E7AD75E915AD7C630F
+:10AD2000CCEB107413CF1F555847C2DC7633F36A4F
+:10AD3000C9FD9FB644709DD4A8B84E047D1ABFEBE0
+:10AD4000728EB3CC631EF4C0F998C7BC0F4AD73BD0
+:10AD500052A2D07A19F3303DAA5E13D7D5067455A6
+:10AD6000D1EE71E2F12C5F7F7E0BFF9489F917958C
+:10AD7000E2FF7085F85BE350FC9F063D4BF1FF124C
+:10AD800094C5F07F8AEBA36AA277E39EAD333D4B77
+:10AD9000C8B57A7E7CDDEB65FD56733D45489B2D3D
+:10ADA000AFC7C5E9AA949EA3965E2B438F352EA507
+:10ADB000E7453E1FDF2B351F2F707ABC5EB66FA9AB
+:10ADC00087E33A5D9A6469917999E278CCF7F2B8B1
+:10ADD00052AAED9CE4EAC715D231353B2FAFF17989
+:10ADE000F945293A5EE5729596C8FA53B09F365AEE
+:10ADF000F90BDB6CF3B288F327EDB6E6A5DD362F51
+:10AE0000A1739C97DF5648CFA2D97939C3E725575C
+:10AE10004ACEF2E0FFC4E1DFE1F068272EF2FEB196
+:10AE20000FCECB9679E2A2B766767FA3709277CDEC
+:10AE30002CDCE7878F5B706E84EB988153BD79FDC6
+:10AE400091D4EB7D70FEDDCFBFFFF8C170E02ADE4C
+:10AE50002E88EDAE61F4D07655F9FD3F3BFCB2D5BE
+:10AE6000FF3C80EBDEF28E0517CE875BE47DC78268
+:10AE70008BC073E1F04C7FB5F9784C79FEA98FE572
+:10AE8000EB38F2BDB4CAF21D5CE104DEE7504D02BE
+:10AE90006989960332BB5F21458DEA27207FD69DC5
+:10AEA000C8920AEC2E5165EDDCD4DE82F3E3791A08
+:10AEB00039E6D1C10531C861FAFE4058467FE00E3F
+:10AEC0004FA2C55BC3F0C43C80D7983DD6ED6FE17F
+:10AED000711486D798EF1343D09F46F182FE3FEF5F
+:10AEE0000B1E03F883F50AE6F31EABBF13EDC4B1E6
+:10AEF0006E99C0FBB1AB15B413EF7B2D80FB70BF17
+:10AF00006C5C8FF90FA6A283DD7897F79D9390A7CD
+:10AF10003CD95DA50957203D887F4A24F15EEC9F0E
+:10AF2000D99D7B28FE900F8C5B17F4DBC1FC18C207
+:10AF3000F39CEFDAA263DE8C4ED8FD4D83AD0AE6BA
+:10AF4000298DD535B4C178F7B5AA6877DC774D433C
+:10AF500037E673B77A31F7ADDAAF0B90DF135CA742
+:10AF600010F810A43AAC7783DD1958EB853BBF4845
+:10AF7000751D1B2FB08CE03D7F2E928EC768191C6B
+:10AF800052F01EA7FBAED996DD09764D2BCB5FA6FE
+:10AF900084BD145B4B889FB392483F24808F6B1114
+:10AFA0003BCFB7E639989E695FF21C3198A9102E05
+:10AFB0005B195C6048C6FCE4B270E90AE13215C274
+:10AFC00065195CD9F37B9E4FA9D27F1087F338F3C4
+:10AFD000B1FDA5BF8B3BD77CDD31AF3DEFBA5C7BCC
+:10AFE0002B4FB71CBD70983983A7541EDECAB32BF4
+:10AFF000F6DE35FFCE087C97365873372FEF616544
+:10B000002D7F5EBB2782F745D6F2F7B5F7E0FD91BD
+:10B01000CE7EFE0BD7C74D245E721EAA39FE6F503E
+:10B02000DC219EDD2497C90770E6FB39F49E2AA730
+:10B03000DA71DD5EC3F28B66BE9FACE3DF8D906498
+:10B040003C86F12C33B872FEECFA716DFC3EAE1FFB
+:10B05000EBBB493A3FEC7B49879C38E5C2EDC84FD2
+:10B06000B9503979E53D9213D79054D1FA71A52B97
+:10B0700084CB540897AD0C4E19122AD22B4ABA42EF
+:10B08000B84C85705906D7BF5EE1FBFA703FC4B774
+:10B090005C97ABB67AFFE55EFBFB0D7E5B7D608D5A
+:10B0A000BDBDB2D6DE7E60ADBDBDB28EB5377C878C
+:10B0B000AE4AC52A5F27FFEB3CD749935A1A3ED0C8
+:10B0C0005A665DA99A07DA57CB3A81FB85E87E95E7
+:10B0D000E1FB56C1F8CF561F5BFF577B35DBFD7494
+:10B0E0007FE97436F918BE16BDE5F0B5F4EF3F4AB6
+:10B0F000DCEE2A92771F029D538B8F17417FC78EFC
+:10B10000BDB510ECCA675F5F87F79AF67ED0CA9B21
+:10B1100031301F523EE9FD38E8AD67E97E0BF93862
+:10B120001321E3F82560CF044402F63275A3F05EE4
+:10B130008F678FCA687FF43E57DAEF7FA68BE509E9
+:10B140003D0D7E3FD5FF47F8BD5B4FF27BB71EEF4D
+:10B15000D2B11CEF6AC2F7992E03EB0F77B562F9F3
+:10B16000509789CF1FECEAC0FAE1AE38D6EFEFEA8C
+:10B17000C4F2DEAE0496FBBB7663B9AF2B89E570F3
+:10B18000D71E2C07BB522C6FB36B887FBF96C6F2BD
+:10B19000D2EF4C8D5C0276925FC4EFC08AE1BF6251
+:10B1A000C21E77B8E4883DEEB03C638F372C3B6C11
+:10B1B0008F372C4937D8DE370E5D6C7B1F4DADB213
+:10B1C000D52FDA73B90DBE3ED96EAB2FDAFD7E1BDB
+:10B1D0007C6D629B3D1FACF3061BBCB67187ED7D99
+:10B1E000B0E5AF6D757FF31D36786FEC6E5B1DEECD
+:10B1F0007DCE87BFD6D7C0E281E1111B9CEC3F68B2
+:10B2000083DB35DF7CC4B706F2F183685F3EFBAABF
+:10B2100080F95DF3161BAF03DFC92B12CA13B99275
+:10B22000E5C3CF6B485E06F7941139B9EEBA40F921
+:10B230007BA4AD788F146C4D80BC9E795DD0C1DE4F
+:10B2400015827B964D1690C7DDA7936402E2923C6F
+:10B25000CFAC7121314DDACE4BF5091E2E926476BA
+:10B260002FC62D45FC8EEA312181F926D46636FEA3
+:10B27000B30679F4CEFD77C3CF7787F17E04B4CBE4
+:10B28000DB0EB44E0D51F8F1150ADE7733075FC7B8
+:10B29000FD76BFF5313F78DF5E16AF6C7C7E7D8337
+:10B2A0000A76784B621EB8AA337A23FB33FC4E2908
+:10B2B000A01B6BE10A80402C4D763603DC0913E2BB
+:10B2C000B614FE6BBEBCF1028F9F4879E9F3E547E7
+:10B2D000128DF0D9C4F85E162F1D1F5E2ADE4AC7F4
+:10B2E00069C82E1797A2BFF324BBD77D48176FA557
+:10B2F0007AA1E1505CDC5A806FE37F2A1C4F9DF4F9
+:10B3000049D87EBC3B83F7CB79B3DFC47B38AD79BA
+:10B31000F135EB6202FA3D9C10C15E1BDFCBBED360
+:10B320001B17A20B239CCE6E079D8017A58BDC0AF2
+:10B33000E5434971AB9F3D6F0CCCF60BEF77C2FB39
+:10B340004C4ADCE2AF887FA6179E3FCEF9772423D4
+:10B3500096E49F7EC2047EAB31CA3FBD14FFEE6708
+:10B36000FCA37CBBD53F975F33F0295D5CDB9CC7BA
+:10B370006FDE1EF8726B01BECEF089B64F60FBA87F
+:10B38000B89A8F0B7C68A074EF2CD44E88F271327F
+:10B39000F671281F6FCD8BA7C39F3F2F4FC48287A5
+:10B3A000BF8EB53C4F91D2ED9A0CED84EFAFDB9A96
+:10B3B00013780F70BF5FC4FB85FAFD5FCDE23DFDE2
+:10B3C0001A41BD29CB66CF4FC22C0EDD23145AA7DC
+:10B3D000763F01BE4CC9FF9EACCF6FE5E197B197B8
+:10B3E000F8BDC212BF575891E31D51B69E8D6E3203
+:10B3F0001B5F9D3BFE41A45B8AD8F7DFBE5DF67DF7
+:10B400002FA6DD8071ECDE7065DF0DB973CCBE5404
+:10B41000383EAE9C8FDD779CF3209E666E1E969B19
+:10B4200073212CAFC82DC2F79B72B558DF986BC43F
+:10B43000FA865C14CBCB7397E0F3F5B9E5586FCD82
+:10B44000ADC6725D6E253E5F9BDB80F535B9F55864
+:10B450006FC96DC17275AE0DCB55B90FE0FB95B9D3
+:10B46000ABB16EE4AEC37279EE5A2C9B721FC7F774
+:10B47000CB72D7637D696E27D697E46EC67A2CF7B8
+:10B4800029AC37E63E896543EEDF6319CD7D1ADFCF
+:10B49000EBB9CF62FDA2DC67B0BE38D78BF5FA5CA2
+:10B4A00037D6EB72FBB0BE28378CE5C2DC7D58D6B0
+:10B4B000E6C6F0FD82DC0358CECF3D86CF43B947C8
+:10B4C000B1D4725FE2F7453F856530F7352C03B99B
+:10B4D000AFE07B7FEEDB58F7E5BE89A537F7029634
+:10B4E0006AEE1896E5E6A9DCF74F9BC93C9B5C6CBD
+:10B4F000CA2DB4D5374CDBF7EFF5BFBAD8565F3756
+:10B50000B9CA565F73F2725BFFAB4FD8F7EF95C7BE
+:10B51000DF6FB71FB2F6FD7B59E606BBFD7078877B
+:10B52000DD7E48FFB5AD1E1DBAC36E3FA4ECFB77B0
+:10B53000FD1EFBFEBD283962B71F761FB4C12F2048
+:10B540000F3AF2C9C76DF055E6D336F840EB571DF8
+:10B55000E72B19A6FF8D6FD99EAB4DCF173C87897E
+:10B560001DBA1ABFDB3F5D27F27B86F8BDADFC7EBE
+:10B5700034E77C56733D302FC7FCA7305F7735B07A
+:10B58000EEF2F29EC0CE88E6D919F31AF4AFBC48A9
+:10B59000EB67162B4637AD5B7686055FF6772B1487
+:10B5A000633245F174BDEAC67BE78460A70971B5D3
+:10B5B000BBA604DCEFAB17119E1FD1D1C1E213C4AF
+:10B5C000BA4F07EFF719ACB7DEEF7C1FBE8FB2FAA8
+:10B5D00071FFDEAD10471D7459EFBFF43E8C7378D8
+:10B5E00058FDBFFB770DC0FBEAAA8908ECB3FB8AC4
+:10B5F0009C6FFE4FBFC2EC7DBFF923FF9AD97BA69B
+:10B600005F09275EF2D3E7B7A9898BE0CA6EB8E776
+:10B610001EEE71DE2A9B3F01B86B65F3653FEE0BB2
+:10B6200076FFE15AC87D5D83F702FE0CDE4BC1A3B5
+:10B6300098DF5FFD817BF0BEAAC100C5C75F1C9F7C
+:10B64000FFE69766F61B62ED370D184F457B7020BD
+:10B650004AF0DE8CC1503C05F7F9A5BEA792270C35
+:10B66000A03BCD9295787EE2E072DD920BDBFE444A
+:10B67000483C0B717C5FC2AF83BDE6272730FF22B9
+:10B6800048A6B1D48826D8EEDBB6E8AF67F4C3FD90
+:10B69000FF7E3C87378F4E629C3549F8FDD56FC1E0
+:10B6A00073CA9733FE35C5F97295740FD1E8F80F58
+:10B6B000537B12E87898307CF773FF5426C97823BF
+:10B6C0008FF7E4DF2321BFFA4D941B2BDE234B1BA6
+:10B6D0003BF07A177E8F4307FD07F6614DBC74BCC3
+:10B6E000C7796FC3B9C67BC20167BCC78FE7C9A75B
+:10B6F0009B4B7F0767C57DF63797BEB732C3FDBE4C
+:10B7000087F979EF43FCBCF741EEF71DE67EDFFDDC
+:10B71000E0F7E1BD5ACCEF3B007EDF32382F366DCB
+:10B72000DF978C16B9FF251A12B89CED41FBDEC7D6
+:10B73000EF2BA29E2BDAF35E6ECFF7FA7BE6C3FD0A
+:10B740000CBE10C9809FB0FBEA71FC7E969262C06D
+:10B75000FD00B7FFFA8DF9FF8ED6631162BBDFC91A
+:10B76000DBECB82FA1DC3872C6847E7DD46F481B19
+:10B77000C5F973CEFDAA19E239AF7ED93D3FD6BDDA
+:10B780006DD4034F81FCF9806E0DE4EADB38CE699D
+:10B790003E0E91361EC7FB0C2F934929399833CEA4
+:10B7A00039CADFAE80E3F7291CF2A7CBA407EFA9C3
+:10B7B000E1DF43EA7EC39B1F5FB1E4B0B799C51FC9
+:10B7C000BA5FFF18FE6EC08B355B17E6FB7FD6773E
+:10B7D0004ABD2D0C8E5A7DB8CEF7779FD43FA9CFA6
+:10B7E000C23D65C169A5E3194F5870A30C2ED06204
+:10B7F0008885EEEFFB22DF4FBEEC3353819AD9717F
+:10B80000F59E8E1B504FAC51F17CC6D9EECBBEC419
+:10B8100050202F3FC1EA3FBF3DC85789F6E952ED9E
+:10B8200017DFDDF17352BAFDE1C09AE2EDEBEEE80D
+:10B8300078B00CFE99C2E3A71EC173A608FBDDB267
+:10B84000EE5AA501FCE57D6BA8BF4CE7E1C5155B91
+:10B85000F15ED9BED02B7A2139A2FD7EA9145E9467
+:10B860002F9D65E8FA5AB9F64269BABE5D86AF27E0
+:10B87000CBF0E58552ED295F0F97C1FFBF16C63F9C
+:10B880007511E01DA863F1BAEE7ACA57F0D7D6B0A9
+:10B890003884B51E1E1F2BCAD757CAF0A59CBCFE04
+:10B8A000E202E5F58D52E35720AFFF5486AFE5E4A1
+:10B8B000F5AD62F28AE7A4E72FAF42F0C2E4D513F8
+:10B8C0002CCDD772F21A2AD5BE0279AD2D857F050F
+:10B8D000F21A2D34BE9B508508F67E333B17DBDD14
+:10B8E000C6EE237335B17DD7F7EA17D13EEAA3FB45
+:10B8F000D3BC56D8A7A7EEBFBD65765F76EE3BCE2C
+:10B90000FE9CFBE6EDFFFB49DC37037CBFB3F0F1A7
+:10B91000E8CE7E4ADF6771AEE37AE17798F27EDFA8
+:10B92000E2E2C7EDDFAD5EF878F67DDDDB42C7A76A
+:10B93000EF091D7F0B9E233E83E7884B0F5DE8B820
+:10B94000A5E19B1E727C8F7B8E76C02D41BB1DDADC
+:10B95000B0E76B8FE0FD23BC9F06D9C4DFED93C930
+:10B9600095ECBE9321962F24EDF9CA23A756E7DD67
+:10B970002B4574313F3F481A9A78E4541E1D39888C
+:10B98000F7B0F832E62DC6B4CBD19E181C2D6DC78A
+:10B990007E99EFE3CFF0F38BA7B91D7B84E72D3EB3
+:10B9A0000976EC3238C760E717E360C7629E632B05
+:10B9B000CF7334799E630796CFF1F3876F751DC6F9
+:10B9C000F747BB32587EA3EB08965FEF9AC0F75F4C
+:10B9D000ED3A8AF589AE2CB38757DE897A66960EE2
+:10B9E00067DCAA341D971DB5C741564CD8CF312E00
+:10B9F00039623FC7589EB19F632C3B6C8F832C49A3
+:10BA0000DBCF311A87ECE718BE26FB398647B7C76C
+:10BA100041DC91F73BCE41B639CE41ECE718F54910
+:10BA2000FB39C6A2DDF638486DC27E8EB1A0F36E3A
+:10BA30001B7CC8ECB17F17DF6A8F836C9AB69F5F5F
+:10BA40006CF8D583F6B8CFA43D0EB2EEA43D0EB28D
+:10BA5000E6C4576DF5D5C7EDF18F0FFB122F823E6F
+:10BA60005D9975C641264598BF9FFBD9F99FE55F53
+:10BA700053F81F80FEBC4AF2673750B97FEC28BBF1
+:10BA8000DFFD31C2CE3309F90FE82FC833FE8289BA
+:10BA9000FA47E2FA67ECCAA957C09F91F7337FE7EC
+:10BAA00076615D56CDF7775CFF28E4AF6B4973FA9A
+:10BAB0000D65FA970DF473E432FEC8DC7E99DE9AC8
+:10BAC000BDDFBC25057954F28C3FF201873F523728
+:10BAD0008CBF6335AFB43F32679C73D4436F058B23
+:10BAE000F8C31111F967F923FB5AB83F42D87752CE
+:10BAF000567F961E1A8B945E87D63D2D63DC6F9120
+:10BB0000FD85CFB1AD7C99B196CAF2BA7F1064E7DA
+:10BB100049149AFBC3FF5F3EDE4DF9B8BCAA88BF4B
+:10BB2000FA1ECB4731B873950F197406C6236F19E7
+:10BB300084EF985C50BF7CB6AEF07AF0DEDBB642A4
+:10BB40005EC81EC2CE75C8CBECBED57278C436DED8
+:10BB50005432FFC18AAFFE496379BBB1D69B306FC7
+:10BB6000F2341DA3D47DDACE3C0B299C841FDB83E9
+:10BB7000EFD80B9EF7FCB49AE593C73A3F51D26ECB
+:10BB800071FE1E58CC2C7DBFEE30C7FF85D716A0A6
+:10BB9000BDBA6F88E963B973C5F3208F8F833C1AF0
+:10BBA000184F5197035D4332DEA7E6D709C6051744
+:10BBB000FB49A63B0A7C3552708F17FDC373E5190C
+:10BBC000F91CB2DB51672C3EC54BF3B5ECEF19AC59
+:10BBD000D7312F4DD649520BE1FA216F84113F5CCA
+:10BBE000B783AD06FBDD3B8A8FA6CD6DEFC4CBB925
+:10BBF0003EE55D57603CA941B0D6A7CF803C9DD3C0
+:10BC00007E7FC97BDEE6F47B8EEBF19939EBF19A0E
+:10BC10009E9FC2B8A32C7E44F6D0BFBC734E677FF4
+:10BC2000D67AB4EA2FBC76177ED732387A07BBAF04
+:10BC3000B88EDF0B36CAF46331BCAC78D0016E1F0E
+:10BC40003E71A8BD07F8DB47D74DBE3E5AF2B71F7D
+:10BC5000F126D8B96235944F1E66DF6B2F7D6017D1
+:10BC60007FBE039F1F68DDD68EFECF21620259C1C1
+:10BC7000F5A754F67E4A43F8F0F471B81769299590
+:10BC8000378885DFBBB1C584DFA8AC0A89ED504A8F
+:10BC9000A393A877492B3197E830AE8CBF9FB33878
+:10BCA000451E057C168F2646403E499A18F0BE2A4E
+:10BCB0001CDF763585AFA282095756A7087BBF38AF
+:10BCC000A9E1FCC5461307AF06F86682BFCB45DF86
+:10BCD00063BD6EB786F93FBED1C921B8F79A8EC150
+:10BCE000DFD33A7DBF30C1DA074627D35BD02F9927
+:10BCF000799FDED202F70EB2F7F228A507DE4718C9
+:10BD00003E29327D02DECF0FB3F7CA28DB1FEFDDFD
+:10BD1000B803EFD3A3E3E37D532EFEFC31CEFF58EF
+:10BD2000E73B27601C2B1F2345E2B67BA99CEBDE7B
+:10BD3000FAFDBF5E6EC7FBD4455F3895771FC33EE3
+:10BD40007E5FB577D4BE3FFFB18AEDB3C7B89E29F9
+:10BD5000772F1B247A839CFF0B555919960080007E
+:10BD6000000000001F8B080000000000000BC53D14
+:10BD70000B7854D599E7DEB9F3CA4CC29D300993CC
+:10BD80009099DC840422043A814041512711111515
+:10BD90006D44DB066B7508C8FB11514BB4DADC90BF
+:10BDA00004921060B0AE44E43189A2A8A08382D28C
+:10BDB00096DA01B3145DBB4DAD456AD146D0A808F3
+:10BDC0003452517657D7FDFFFFDC4BE64E2689D61D
+:10BDD000ED6EBE4F0FE79EF7FF3EFFF9CF19C61875
+:10BDE000FB2A17FE5795C4A2058CFE285F99CAA2AC
+:10BDF000B698FCFC4C637930D7982F1F69CC7BC672
+:10BE00001ADBBB2F36947F7E1D631D4EC8487E1BF8
+:10BE100083543A7AB3AD6C3463B5EEE5943F7FBB9F
+:10BE20005E1E48C27C9E7CD28EE58F5555D8582127
+:10BE300063AB3C330605E1FB57F87779EFB4A19A81
+:10BE4000B1A895B135D5214A9BAA5B286D2E6222F7
+:10BE50002B666CED6831DC96C3D8EAC219D45FBD9D
+:10BE6000BBFFFEDAB0BF118C85AB6D946EAD96A9A9
+:10BE7000BFCDD51E4A6BAB154A37551750DA52ED78
+:10BE8000A77A0F554FA434541DA0745DF5342A7F52
+:10BE9000BEBA8CF2BBABCB297DB63A48DF7755CF23
+:10BEA000A7F4E9EA4A4A9FACAEA2F4896A95D2EDBA
+:10BEB000D50D94AAB2C8581AACE74A7F6619CCFFD0
+:10BEC000D12B5979A4B0F7BC5559E0F56480E578D9
+:10BED000C6925828CADC882FE84B61CCDE10623647
+:10BEE0008047E662F886F9AA10B342DE3387E7D7C7
+:10BEF000E138D0AE8AB100C28D15B0F076809B4D8E
+:10BF000009B159305EC0ABB21B92199BAE8D83DF75
+:10BF1000118E6A8ECA105F272C81EBE434EC8751B6
+:10BF200079FEFE8E8388D6311D91524C0B0F8744CB
+:10BF300009D291532A579A201D345915B1FD2A8FE1
+:10BF4000582AC078E7AAC4B009BA568AD94113E47E
+:10BF50001F2B14C34D307E73091345C46306E05193
+:10BF6000E8596FD2F9AD2C3A0EF05A3563104B00F8
+:10BF70000F3D1D3A5FECA147F82F2398D443AFF053
+:10BF8000DFEA50FFEDC7EC110DF50B77C6B52F8436
+:10BF9000F6FDD0D3C8C78CED0B362719E6B3DAD33C
+:10BFA000FFF8F9E7AFA775F645B7A72C153F43B8DB
+:10BFB000EBF9F4F397B1E860C6DE72CA84CFD46BB4
+:10BFC000EFF3040B69B82926A007298B859B04CCC5
+:10BFD00006D86C80AB19FED524F33CC2DD04486A58
+:10BFE000F223BB2A019682A93FC0C6601AA0FC2199
+:10BFF00073B0591E8FF932FE5D0E121D345F045D61
+:10C000005C8CFD6437042643FEFBF0CF4CC6AE0FBC
+:10C010005D344D85FCE7E6A05805E3AFF5727E5C24
+:10C02000E11B9B84EB7EB4B97F7EACD5F851CF9BEE
+:10C030009C0126403FB90DF258A4A3BEDA3DD8209A
+:10C040004E0B27E8F729A45F987F7DC30C391F5753
+:10C05000DD8E328B31AB9311BDC5D787F53E85F0B0
+:10C0600035BBF93AD36E2AA3346FE7245B19F0C3CA
+:10C07000E7C9FDE3AF316EFE76183292605E1F6A4B
+:10C08000F3CA7BED17241F3F1FDD3F5DE972EF7C94
+:10C0900058641D885FA98CE469DA4D419607EB5915
+:10C0A0000DFCE244B9F7E58D0D3980577583487270
+:10C0B000409F7FFCB826A5B34484F2D5071630050F
+:10C0C000C6377BCA985A88795D3E4718F6EF707676
+:10C0D0000470BD0E160A98A07F475550C5EF168F05
+:10C0E000CA90CE56675CA84FF2764D481411BEAB8D
+:10C0F000B2C4301328654EE4F76246F9E48CE702D7
+:10C100002292CD17309F09D00FFEDB84F05699881C
+:10C11000EBC8677E27CCCB56D01D10A17E1EDB1747
+:10C120004579602B61FE26E49F8C2301A45BF50E0C
+:10C13000E6CF27320F923C6252D086F22AB7650CC6
+:10C14000F1834D8908B8EE1F5882EFC5F28BC5C345
+:10C15000E5D8EA2F4D09E5EABF6A7231A90FBC396B
+:10C160005CBCFC73B3720DE91BC8B725A023B38B6D
+:10C17000CBF13679C6EF0B941EBED4CBDFC2458E11
+:10C18000EFC9E79EB7D0BCF36EFAF1205C4F5F7445
+:10C19000B04AA3AFF583B8DCCD9B7C6900E17D0E8E
+:10C1A000E6DA24F4AEBF609042F5F4BCE434CAC7CA
+:10C1B000AF3F3F89E452DEA97B381F78FBA7577D4C
+:10C1C0009E9F7B8DF6809867233D5D1F12492ED57B
+:10C1D000BA459602F9AD481F3928303BED17C17AB0
+:10C1E0006C6F9818E27B6B55A9A84279728E142661
+:10C1F000FAF37447519CD9257600E903F0ABB8D225
+:10C2000010EF13087E59C51101E9FA94A617E1AFA2
+:10C21000CE0374E6E34B46FE1EE182EF819D02975A
+:10C22000031E2E07CCCCAF5A717CD0881118CFF1E9
+:10C230008689BE331689DE0FF92459F4A3DC5C5BD2
+:10C24000BC321DF9CDE162A4BFE65FDD46F209E430
+:10C25000AA7F13C8D1A51F75A52F837C9E87CB5DB0
+:10C260001D1E498516835E18701C291C403DE9106F
+:10C27000983FE4EF1BCEDFB85F5B98D9FFA17E410A
+:10C2800061A4135F687F3B549A1FAE1BFAB5B25F7F
+:10C29000D138E7B47198E9D861846FD27724664ABF
+:10C2A000C01F7D8E63BAA55FFD50756CC1EFDB6367
+:10C2B000E8F73657B2BB6B14FCE3BBECBB5FA18263
+:10C2C000303989BECE813D81E32A367610F375CDB3
+:10C2D0006238117F7C5E3DFFF7ED80BCB59A5EAFA2
+:10C2E00079D75A4AF4395E0C5BA17E7BDAD4CCCE86
+:10C2F00018BED0E5706D31D70340DD0CF9616DCD0E
+:10C30000516581D253EF49BD9EDCBFBED8AED76B1D
+:10C31000E6F5928BFD623041FD27347E7AC611B876
+:10C32000CF35BE675C65E5B49B490E8DB73153824E
+:10C33000F53DE308D6B962F858EF3FB63DD26F3FFE
+:10C34000ED9B5D697DB7F7DD3BED2DD67FFB07FBF0
+:10C350006B9FB57CDAA601E6BF39F1FCD56DD82E0E
+:10C36000D9636148E7351996DC06C8AF196FF15BF0
+:10C37000010FEDA3A77A106F75AE234A227A827E51
+:10C380009FE86F5E0097F201D6F5EC00702D17FA6A
+:10C390005FD78BFDB507B81E1D002EBF1900AE2D4F
+:10C3A00003CCFFB789DBABD938EFE42C0BE9931A48
+:10C3B0002FC0D58DFC0070653DFCF0D8863EE1FABB
+:10C3C000FA40F436C0BADE1A002F03D1EBF101E0D7
+:10C3D0003A10BD9EFC96F47AB60FB86EC3797F0B07
+:10C3E0007AFDF25BD2AB39F5DBD16B726AFF72601A
+:10C3F000207A4DEBAFFDD7A0576FA2F95B9923A030
+:10C40000A2FD53C8F5F8FC1291F4BAB980EB5FC7EE
+:10C41000B127488FD6819E1A3C11F5F5F187961603
+:10C42000F7E8E778FD13DF5FBCFE5CFAC9E3CC8E6A
+:10C4300078D4F49E3E1FBB12DFCF8FFAB5E3BEE97E
+:10C44000B8491E16B58FE9693FF2318BC18EFBF6F4
+:10C45000E319F57B52318C8FFE0418FF8A89A857A7
+:10C4600077FA912E873FF86DC7EDBF7EC16663FFF7
+:10C47000DFD41E98950AF680A3C71EC8AD7A7EDB6E
+:10C480007B837BFAC995024C06BA91D814B2DB586B
+:10C4900003F36FC7E2AADDDBDE1BD7630F0047881B
+:10C4A000B89FD0C7313544B6BD17B38EF37398B675
+:10C4B0000FABA47D4F9E7C7112D2F1EAE6FEEDE255
+:10C4C00067343DBE53F3373D85FE264877A0BF094C
+:10C4D000D2C7D1DF04E963E86F1A81FE29EE6F6AE3
+:10C4E000427F9315ED0FEE6F5A85FE2648F7A31F86
+:10C4F0000CD25F6A7EB07DD5614A5FA8DE41E99EBD
+:10C50000EA08953F57BD8FF291EA28E59B8B7E4262
+:10C5100072A6671DDC3ECF93757F5DFFEBF8CE3EC4
+:10C52000E33E6274C4E82719B523D590BF289C69FF
+:10C53000A83FA225D7509E1F1A69281FD630D69033
+:10C5400077145C6CA86F574A8D74E5B9C6503F47A5
+:10C550009D61C86757DD6CA8EFADAC30940F9DBFEF
+:10C56000D0509E115C6EC80F29BFD750DF15586997
+:10C57000281F34B1C9507E69F70386FC251F6E322F
+:10C58000D49FD4D96628FFEED1A70CE5E33B9E33B8
+:10C59000E4C71DFEA5A1FEF71CC128CAC3A2E8413D
+:10C5A00023BFB04E11F1D79EC268FF6387FD7B2089
+:10C5B000813DF95F83F83ED6CA4691BD7B0EE459B2
+:10C5C0005311B6AF0CE1FE3A17CA9A14DC9A8705EC
+:10C5D000368CA1AF286A4F89E5876F260770A78F31
+:10C5E000F57DF0877CF95FFAFE75875DBD0CC7CFDE
+:10C5F000E3F2589555D207F1ED75BF50DE8E998361
+:10C60000B0BC4E2E9513C9851396E089583D11BFD5
+:10C61000DFCD0B24B3008ED7A0FBC5B8DC33F12AE5
+:10C620002CF7D8558705F483958F49C5F5E8FE9C0E
+:10C63000D51ABFD66B7C6A6597A8E8AF38A7EDFB23
+:10C640009869B2BF3F39150FAF6F2AD7BE488DDF4B
+:10C65000E74C8FBE8FE33748E144FA524F75799625
+:10C66000F7C66DFDE24787AF8E4793DC1140FD6A48
+:10C67000532A5985B3379C4C599C1EFED9EB1E3A60
+:10C68000D828CFCFB1C2D240EED7586FF9ADB40E93
+:10C690001D9FF1F5D655F37D5733E295CE1164CD4C
+:10C6A000DFCFF12B4E0CAC44F8A6C03E1AFD02A21F
+:10C6B0003FCA3A13CC7BD044237D25FB8D72D051E9
+:10C6C00060948392D32807CDFE4A16413F2D8CC338
+:10C6D000881E830CFDB6F81FF19F3C10DF5D121021
+:10C6E00062E87020FEC321BE1A3630BFFEA3FCDD17
+:10C6F0003E279DFABF47E36FE0689EAAEC75A49FB2
+:10C700008A891A0131E5877F81792F386C263FCFDE
+:10C71000E55F6C3BB405FDD113AD32FAA3190B1DD7
+:10C72000FA3594CF09D8CA30BFE0D8688B0FCA8FCA
+:10C7300064021178B0BC2C05E5C069264E433FDD8C
+:10C7400069F67ACAB81839B764B085FB7F1ACCC7C6
+:10C750003B6D38BC4AE753B787785E5FD7BC16633A
+:10C760007E2E9B912EC138731F34A3E4630B987403
+:10C77000BC538703D0C18F07CBB49E79AC72950CA4
+:10C78000E3D69BF9F9CC9217475B100F0BC6C9395A
+:10C79000A6A29E79DC3D98FB014F02BD29D69EEFF3
+:10C7A0000B9D610BCAE5137BC6FDE01286FD845725
+:10C7B00065A25FD305F688D21BBEB31B8CF31C6841
+:10C7C0001DF1F3666C25C1A3AF79483B844022FF7D
+:10C7D00079ED60C180C75ADBCFB675C23C03B51294
+:10C7E000B35F0679899F1FA9C792C3DB517E975615
+:10C7F0003ED1097050575AE55A48373A7EF62CD642
+:10C80000AF0284E1F9D3CEC10AF79FDA7D613C5FC4
+:10C81000007DF3DD19C9DFBEDFDDFFA47E5FC07ED2
+:10C82000D37AF7BBC4D669C173B46552E5344144C9
+:10C83000BF22AF6735070343D19FB8AF283A5431C1
+:10C84000D46BF89AF50E0BB95FABDE34B19FFECE18
+:10C8500068F2EDB73B1FB5A0DC3AFDD4BBD7E3BE11
+:10C8600068D1AF4CCC06F5CEEC4C6651B2FBC2168B
+:10C87000B45F17EE3105C2948F4EB8313996AF6B65
+:10C88000A9FF45CF26D3BE6AE173D6F07468BFF026
+:10C8900085136318C883332BBB0F0D45F83D2590D6
+:10C8A0001DCDD4CE3137C2F78512BBAD2C81DDF161
+:10C8B000678D1F4EFDC2518EF426EC38702BF51B90
+:10C8C000F9A1D91AA3C73A069B099F508FFCDBEA4E
+:10C8D0009342385FE0F3BB6174ECFC6A78BD27B922
+:10C8E0003F77E13E73D88EF3DBD16A0942BD653BE9
+:10C8F0003E21FABEE2D95D29088765FB4C06B9B630
+:10C90000E8D92F575D0C785E6462DDD3498F7F4193
+:10C91000F973015BB789E450204500B9B59444161A
+:10C92000D47BFE83A97F81F2931E13B3832838D969
+:10C93000F1BEE557980F3A2B991FFB37F2E1B21D74
+:10C94000272C382F5964DD59C0E8977D1AC397AC5E
+:10C95000777DC6BA2D286797451A3F3101BD2DDB7B
+:10C9600073FA2DA4BB6571FC7C12FF91D15B5F0A49
+:10C97000EE787DF9DA0486E7F43B601334A96F7D25
+:10C98000A9F3F7A25DE7B6AA30FEA9E73EDEAA0248
+:10C99000CA17FFF7DFB7FE14F7492FD965944BCBC1
+:10C9A0009EFA530A8B817F969B9F279D79F289C7B8
+:10C9B00037011CCEFCD94A503BF3EB0F7C0AC0FD7B
+:10C9C000CCEEFF48C7F3A5BB7E7DE510A4B3BBF654
+:10C9D0005E31A4BF7D05D26DD81A8BDF30F5AFEC88
+:10C9E0008371864076BF96C6E1E5D4EECF2D784EB2
+:10C9F000F499C0BA51FE2E8D7C6941FBEC508075D4
+:10CA0000239C5EDE73E2D0BD903F0D78B226C0134A
+:10CA1000AC7FA8487A253A14F5CBD23D377EEFD2C9
+:10CA2000624CCD7E05F1C4BA49DEF7C2EF1B80DF50
+:10CA3000E21EFCC6979F635F5810FECB76023EC78E
+:10CA4000205E019F637AE3F334FE63526F7C5ED213
+:10CA50000B9F8BB76DC2C23D8309FF7DE173C9DEB9
+:10CA6000EFF76B67E9F2612038CF17F8BCACEEC086
+:10CA7000B56EE4B3E71CAA87E3393C1DCACEEC3A95
+:10CA8000E74367C887E6EE5B110EDDBFB6CA786E76
+:10CA9000BFF0D76F12DF9DD9FB070BE21FFE528458
+:10CAA00009906717FE5E67905FCA6D70B684754F18
+:10CAB0007DAB1853D6ADFA097F943F047C48F80843
+:10CAC000DF304D41F91B4EA3752F0D73FE581A3EF2
+:10CAD000709330A637DCEBDDA276FED3835761225C
+:10CAE000E2F3DDA9487F7DE1535FBF8CEBFF2E941D
+:10CAF0003F66E4DFF8FA4B815F717FD40BBFE1033F
+:10CB0000FF8EE99956AB24802D7406ED04676FBC47
+:10CB1000F7C09FEBE76F6A1F57C7D187DE5E87D3E9
+:10CB200040FC3ED0FABE29FC96B815031DE9703CC6
+:10CB3000F545627DF088263F96B2CA6999C37AEBC3
+:10CB400033132B53870A3DF35D1531919C3FB5C3D9
+:10CB500044E733F1F262299EDB2618E74937B763D1
+:10CB600096EE3B3006E5DAA983BFD0E892D3FDD23A
+:10CB70009DEF5A544D3F8463E5731FE7C0CF6BF3BD
+:10CB80005EB63F717FCB767E92B0BF9352E087381E
+:10CB9000FF931D66A642172723A684710B5BDC66F4
+:10CBA00083DDB52A79C2D141B82F48495270DDB52D
+:10CBB0002B036FE2B9A8FABA99CEF999E4FFD00A2B
+:10CBC000E5B5C9490AFAF36A53E63225468FD7C557
+:10CBD000C149F294D1F99DE42E2BE67BBAB0E1BCB9
+:10CBE000D70C04113B6FD0BB59A897DE29FAC08C33
+:10CBF000EBFC6B9C1DF95789AD1A02FDFD5515FC28
+:10CC0000354AA2FD81B1FFE07D26A6C4F4BFD4DA87
+:10CC1000FD0ECE87FDC6CED02E33BD6417509E2CA0
+:10CC2000DB6AA6FDD732D85621DC3ED8620FAB9026
+:10CC3000DFF87CF5ADA897FEB6D5CAF05CE2E5BD9D
+:10CC40002BBAEE41B9F488C0D09FFEB75F547F86FF
+:10CC50007A79C166581DC893798EEEC7B1FDBC675D
+:10CC600087B25A68FFB11099809BD9AEB4E804DC52
+:10CC70008774EDCAF0ABD4CF8B4BB1DF33CF3AA87A
+:10CC8000DF33BF7993C639F39B64D26BFAFCC1DE04
+:10CC90005662F538D8DBCA053E207B3B260FE32CD5
+:10CCA000C23CAF2F7CA5C93C947F8B3005BA5FB4E2
+:10CCB0006F5000FDBB31F5A89F65D6EE9FF869FF68
+:10CCC000AD668AB4778A66223F2EDA611CFF3FDCAC
+:10CCD000DCAE5A66E99ECBEB873239DF76503B4BB0
+:10CCE0009A46AF5A797C7BBDBE94966BA8A7B75F76
+:10CCF0006A659589F8C0A5F5BB68C797238CFD7157
+:10CD0000BAED3D0EFF7EB7C0C87FC276DB29EE6C60
+:10CD1000B1253A3C15F8F6050B9B8FFCBB38253A3C
+:10CD2000DC05E3FD4A939B8B93200FDF33B57960DD
+:10CD30007DCC335BE719C4EB9217ED74AEB2E4859A
+:10CD4000373F437C9E421803C64EA5757CF653A020
+:10CD500083535B4C4C057B6D8935EA7B04F5D46EBF
+:10CD60002B6B43FE7EE915D25BA79FB38AFD9D53D3
+:10CD70002F890035D87AAF432D6505954E8CB709BC
+:10CD800088ADB86F386C0AD7C0D8555260E5B3B8D3
+:10CD9000BEC366DA679C9DC30A705F799665FA55D3
+:10CDA000C2BFF2A604E52B5E350B89E290CCE741C9
+:10CDB000A88F033E387F2D532095CE0FA37485A5F1
+:10CDC0007204CA5D930C8B2B243F01D9ED66B79F8B
+:10CDD000CD8374452A0B22FC98F39A0BFCF57B401B
+:10CDE000E9F2879521D86E521A972B73D20357A672
+:10CDF000917C71CAE457D2E854DDCBE7F9B990E4ED
+:10CE0000AF8179E59DBFF73684EFF2770525F6FC13
+:10CE10003C3ECEB34A52DE548A69BD248FF2E424EC
+:10CE200086703D2BF3B8BEB3739441AE18B9BCA65F
+:10CE30005A26F9D158EDA17475750153C8BFE6A7FC
+:10CE4000BC495BBFB550A53835E469FCB33ACB02A9
+:10CE500068E7E19CF2153CEE0F121D593D95E49BED
+:10CE6000B23919ED634D4E95CD83D4ECE4F03139F0
+:10CE7000CB083E162D2FB54C2778427BFA7E797A67
+:10CE80007011C2C39635D220972CEEB1867C2F78D4
+:10CE9000E9F8DFF57F053746706AACB651BABA7A61
+:10CEA00022C1ABBE3A40F9FF07B83DC0E17631C6BA
+:10CEB0005AC4C0ADD490EF136E0F03DFB863F90608
+:10CEC000E0887CC392FCDB13AC3F3E7DA81A17C7F9
+:10CED000D803D52D94EADF53FBD0DB9FA4713BA090
+:10CEE0008A056BCC74BEC5FD2DCCADB2AC093DFE40
+:10CEF0004DE651998279E455C4CBD12482DDF2B755
+:10CF0000EDE43736C95257AC5C5B7E9D3204E59741
+:10CF1000A9EA517662708C1F6D7A995D21B8FA0585
+:10CF2000F4A7D66A7AB3FE02FE8C7CB0A65AA1742E
+:10CF3000ADC60FEB357ED88078867CAD9F9F6F366F
+:10CF40004F63A417FF05F27C1F1F65B171262E7F6A
+:10CF5000246A067C938C54288D529CEF516B381FA9
+:10CF6000E3A80A19C5D1B98EDE43FE63C6221EF4BA
+:10CF7000A7B934B8B1FDB9AE99C9B43C33D73BCCED
+:10CF8000C4D39019EDF178B8D6FA0FDA707FDDD7F7
+:10CF90007C4ADE5920E0789FCF243431F72D91A3CD
+:10CFA00015B00E67B383F46ABABF321BFD7BEC98F1
+:10CFB00095E8D3E90F0AF362F097DE875D7767FAA9
+:10CFC000D57F45FAEB4459067AE88196617684F379
+:10CFD0001A73C483F26E8D8BEB0FA51CA0F0DD9E3F
+:10CFE00076AF687230A5D8C8EFBA7C95278F35D058
+:10CFF000AF2E5753A718E95C97ABCFA7717FC59C9D
+:10D00000F4B24FD2201D7C7E33F1613CDDE7C917BD
+:10D010009707DDA80798BF09ED35B419D18E7B5766
+:10D0200008737AE7FEA9B39D396D68E7C0AE80E466
+:10D030008A8AFC4078EA7EF92B68B74B930F2B6DF8
+:10D04000336CB8DE06A02386E77A403F08E07540DF
+:10D050003F9886807E387F4CA454A74F4F7A8E210C
+:10D060002ED0947748E4F1F222F99E25D8DF396179
+:10D070003CE9C0241BDA7B92D97F18E55477B218BB
+:10D0800041BD59EF9C610BA0FFC6554C78FF2CB9F0
+:10D0900022BBBF3827B05BC86F2B3BFDEC388EC37B
+:10D0A00018F96D4DF25886FBC45DCE8E24DCB7585E
+:10D0B000D345C3BCE6A407BDE931F9D138BA862F00
+:10D0C000EC7697D64FFC7817A56B7ECB2C95056236
+:10D0D000CE2DAA74FA5654362586BF57E64F6518EA
+:10D0E0007F11CFD77DCAADEDDF4E6ED56687095F64
+:10D0F000E67879E10639EEA45415659CB777CD8FB3
+:10D100008A88AE2E4DC7FDA1B3ED821D72796E02E5
+:10D11000FA3A3A7208C5675ED033B06B2E243DB33D
+:10D120007122B747343DC3F5D3D96607E9A7B37376
+:10D130002A299EEA6CF31005E9EEC0BA4BC6203CE2
+:10D14000E69E6F640ACC6FDEF94994CE6FF939A57B
+:10D15000152DAD40E48CD5AC9DB76E26B43BF1B037
+:10D1600089E283BAC2E3CE5441BEABD9CA4C304E39
+:10D17000D7E63BB3D12FDE05E3A07DD5B5399FE8D7
+:10D18000AB0BE046F906637D8C0B36015E2A18C7AF
+:10D190000BFC2F80F5E7BE626A4D642755ACB706DD
+:10D1A000129DEF5C286F496CB7D5E23F33F07F9555
+:10D1B00023105E25EFDC938DEBD5F97F452AC8233C
+:10D1C00084D73B5696C81F7F79FA9573912E2F4FBF
+:10D1D0000F2CE578494DE85FEBA17F3EEE0911EC9D
+:10D1E0005BC24B30E506839F95FB314F68F62FB34A
+:10D1F000F5519EA2B59713972F69FEF8D0FD0CEF5D
+:10D2000029549621D1EBFB691383FDB480FBDF1B0E
+:10D2100028FE599F0FD8A944C70CF081F2658EE60D
+:10D22000EF01B87FCF02DF4FBC6212903E7AE8294F
+:10D230009882768BB0E6BA95BBA0FCEF87F9FE6CBE
+:10D24000C1F90D24EF8435A3374E82EF77BE6226F5
+:10D25000395FD374C9FA5B00BF9FBE66A2FCFCF3C2
+:10D2600076AAF7D1FDFE8DB740BDEEDF99C90EFF5E
+:10D27000F4F09514FFF891D9E827983084F3F1F38E
+:10D280001A3FCF3DBF86EC0FBD7C6EC36C8B4274E2
+:10D29000BA8EBECFC5439B4C9CFFF7FFAD44C2F393
+:10D2A0001C46F7149E7FE8866B57925E1B4BF6FE7A
+:10D2B000BCB5567FA278D0E7D31583FC99D7D94C5B
+:10D2C000FD32B08BDCE95A7F317264DEF9C1C407EC
+:10D2D0004C5619C619CFD5E4C985F96D361BE4C97A
+:10D2E00047F6C47E9097D3F93E6AEEF94B88BF7A31
+:10D2F000AFEF32FA3E571FB793F363CF7A364E4AF9
+:10D30000B49E9E754CA6FA1FB9128F7F52836F5739
+:10D31000F57C1600B95461857A4E1CFFCE55138BEF
+:10D32000711DAE5421665DF35A16B140CCBAE66D5C
+:10D330009E65A988E9B7070FCB0C783899BE90F0A5
+:10D3400070677AD911E49B8A35978E417A9CD7D23F
+:10D3500048703E61F6FB50BE7ED072674AA238D854
+:10D3600093F1F869D1F003F66E710C7E74BCC4B70A
+:10D37000EF7A7BDE6718D7D4F530376EFA82572FF5
+:10D38000BCE524869B3484E3AD0BF46D90E0A6BC31
+:10D390007014E97AADC38F74DD37FC46B1607FF05D
+:10D3A000EBC37E057BE74B943B12FA68F11CB28518
+:10D3B000D3C14070EB1957A38392C4EB197B613D35
+:10D3C000554C05863D6E19880E7ECA545B3FEBB8FE
+:10D3D00040073F37D0C1D88D4DD7AE847A1FA2BD4C
+:10D3E00032A237FE8F5BD4948BF1DCA7C944E74AA5
+:10D3F000C793D4F49B79BE08E5F1F194D0F5784E4B
+:10D40000A3E7176CCF4F991533EE070D008704F093
+:10D410001B3B4431F8A12ED04F9ECA0A27FCF3E8EB
+:10D42000E78439F13DBECBD34B260C413B2594D844
+:10D430005FABA7BABC360D725ED867A2FE3CEECCDD
+:10D44000FD2C0CA5F5E9C1D221E3317EF427B7A16B
+:10D450003C387E5C207D5BF3F68A11A8D7E2ED04B0
+:10D46000D87F36E0B9E70A537288EC50A9721B9D49
+:10D4700083AA12DB5E8CFB94CA4DEFE5A3DFB08A72
+:10D4800052A6D9A12B4C23FD4DE497AD7C02CF4988
+:10D49000814864AC2FB14A3A3705415886F98D0E60
+:10D4A0007EEE5A25D9646B4C5CC2624D9ED757976D
+:10D4B000FDFC3DF443DB5426A7637B2E3725C6EDE8
+:10D4C000AFFFC479C6E87B8B3928FB711F2AB032C5
+:10D4D000E40BB314A47B4E668FBB488DC1C3C2213D
+:10D4E000DC7EB4B7B737E4407BFBEDBF93510F5AF6
+:10D4F000611CF4B3D9B2A4B3B1FE6AB33B42F7984E
+:10D50000585ECC77B0AB9C859037F80160BEFDD8F3
+:10D5100085BF12FC9ECF901E6B383C26228820FDD2
+:10D52000F39C61AD2897274A75268C3B9A797B3E00
+:10D53000E537CEFE6A7867027A98B97F7507DA33E5
+:10D5400033F767CCC6F38399CEE1EF630ADB055B63
+:10D5500012B47F5960912648A7D81EA5B8C6973542
+:10D56000FF583BE663F462BB466F60E74CDB0DE9B6
+:10D570004C5BC87C47618F3F2D7EDC0D1ADFB79B6B
+:10D58000236923910E601C5CC78FF787BF0FAA9F8A
+:10D59000DD12095F371AF0732BEB36231C834CA680
+:10D5A000730FDDAF5BC1FC5A9ED1FEF42F8BCD6DA6
+:10D5B0004827F1FDDD12E5FDFDB81DFA83F4D6C361
+:10D5C000DDFF8A6A391891A73A584C7FFBFC871C0B
+:10D5D000AC777FF170F64B36931A03574091180BD6
+:10D5E000F75EF01D547E0D1BD3379FF5C09BCF23F4
+:10D5F0001E1F9F6211F0E9234302BB906FEF1D12C3
+:10D600007806D3C5B66E9F047473C41D7C0EF34BAD
+:10D610004DC1EC7480C7696F70441AC2A523F1F93B
+:10D620006B3C7FE7959FDE827C736B8DC410CFAB24
+:10D63000F67EB005F9F2B419F808F6032FDFF341CE
+:10D6400032D2CD1260C05879F24E553ED94F67F7AD
+:10D650008CE8F7BEC93B9ABFE4558D4FF475DE8662
+:10D660000C08E3DDB6C741FB99DBAA4C17F6594815
+:10D67000EFB755F1F81026758CB9C96077D669E710
+:10D680006CBDFBC17D447C3F5DD5C16DC4F752705C
+:10D6900002DADD27AAE76F43F9123F4FC5137C7BFF
+:10D6A00008E9B75986B8DB39CD0BB6C5F2A15EBF24
+:10D6B000B60FF9BA7FB8B64E1B1F8F29DF29714EFE
+:10D6C000A07B99F4678FDADE1562E861A0F158DE7D
+:10D6D00094C005B940F7E545E64CEFDD5F7C3DBD04
+:10D6E0007F4FD515ECC4385C5FE0DC90F103CF9F31
+:10D6F000793479A6B5D3BFDB83218676A1FD8B4132
+:10D700006427EC1FCEFD0F9F6A760173C27A91C128
+:10D71000421B03FF1FEB8581E95EA67DB335615C8B
+:10D72000519A47E274133954624B30BF5EFD452570
+:10D73000F675EAED1FCEA85F749391BF6B7812ED7A
+:10D740006B2AAA6A699FDD08F203F541FC7C8E37DB
+:10D750003DA2A01EB05B420AFA451B87A7E7AC8436
+:10D760007620D5C8EF634F0A2952EC77CD1F645F4E
+:10D770001952707FDB989F49DFF5FE1A052E6775F9
+:10D78000BE68847DDF73E417F37B66605CE91BE1B0
+:10D7900069C9D0AE6D158B9A7C8C1DF4658EC27DE7
+:10D7A0006EA8DE42E77B8D0562C61CC8A7786DE4D3
+:10D7B0001F6B754567E23D5A559048BF865CCAD5D8
+:10D7C000C9E8DF5D39A403E5DFC13B2CB4DE359346
+:10D7D00044DA8F592F7E2F7405F67F17F3A35E6D01
+:10D7E0003BFF7C8B13E5F051D8CFA2DF103B0579CE
+:10D7F000D436EDAC1DF773A918570774B3D91CA123
+:10D80000796DAAB152BF9B5A2DE589F0F77E864407
+:10D81000F5C34227C5070F66113BC2F58169333650
+:10D82000E641BB9C3C26E37E7E4DE1596DBF19303D
+:10D83000F1F328DD8FC8ECDA79964D3BA7B2C5C667
+:10D84000173E12DA43FE43C7F4084FA789E47F8EE0
+:10D850009FC7520FF7E33926774C433DE1281699CD
+:10D8600080FECD3C26E0BAE4696D748F39A780F55F
+:10D87000D19EAF5B0E40FB62DE1E7D42F2D76C3F55
+:10D88000D7C3E30CD7A21F0ACAC366BF7035CC2327
+:10D890007C9D2CA84A4FBD6A0FD7AFDBA0FF28C9DB
+:10D8A000D130ADCB57108922BDF9168B84A7B513A3
+:10D8B0008FD3B9C003C5BA1FD54FF3D85C73E4004A
+:10D8C000DA5F9BEF6664276D46190AED365FC7C2C3
+:10D8D000FC3C8965A27CDBB4C0722D9DE71702FC7D
+:10D8E000054A13CEFB4719365AB7EFBE07A2784F49
+:10D8F0003FC9CFEFDF429AB07E6D8689E6BFC91C73
+:10D90000CE40FF485F743143C387AF4AB3AB58C8BA
+:10D9100083785DA7C187DD3496FB17A480121BC7EF
+:10D92000D5A34FB81F03D64771AD83EB2CA48FC48A
+:10D93000E9D199B8AED4020BBB2A07F98BC34D1DB0
+:10D940002DF2B833166E41FE6CBD289DE249578B0F
+:10D95000610FDD132FB5D079F2C189E2CCF950BE49
+:10D96000BECE427E08C813BF8402B9ADC86F8EC94F
+:10D97000A5E5F321BF41B6C808DFDA42D98E745C51
+:10D980001B106501F2EBCAF47B128CDE3128329950
+:10D99000EC0550BE2D43441F2DDB2608C4EFF58156
+:10D9A000D2D030F85E2FBB85583FC05E0DFF8BB2E2
+:10D9B000CBF67A906F020F8486291C97D20422310D
+:10D9C000FA4B66D1F91873D35AFFF851BA0F556460
+:10D9D000A3FBB3DEBB42E574DFF1228B82786D3BA3
+:10D9E0003F7814ADAFCEA2203F6F10C25723DF6F38
+:10D9F000BEE3908A7E75FBFB4E8C1D66CECE4FAA91
+:10DA0000317ECC596C893BC76222CA717D5CE71BB1
+:10DA100051A2A74E21F8C764F2FF143615B8299E0B
+:10DA20007902C273DDC56F15CC4D4017D0DE993E2B
+:10DA300016ED65313A610CCA29AEC7982467C4E275
+:10DA4000778337F3CFE867DA5A02F3C7F1AABA6EE1
+:10DA5000A179058EFC14ED2AE7B18FBE4C3CCFD7DF
+:10DA6000498F241F7344C531982E994EF6596C3D49
+:10DA700090FB8DD981BF7A00BEBB6AB8DC6FBE9DBA
+:10DA8000D1BB13F8571003DFE64290D2F4000140F7
+:10DA90001EEB15CAE4475F2D2A9128C2738C8DE8CE
+:10DAA00069080B925C8B5FAFE358E31D1877E4F0D5
+:10DAB0001BE77956C32FFE49E9745E819628B3644B
+:10DAC000CCB1A3FCDB3D56C9C0FDF603AEC47AFE63
+:10DAD0004F197C5FB44B486C9FFF2DC3CEFB075999
+:10DAE000199D40A86214D70779319DCE6DC8C96DC4
+:10DAF00015B95C60D730D27B29459D767FCC784FB5
+:10DB00006BE3D01FF433486BC7E4EE680DACBF1570
+:10DB1000A816EFB5A578391C9D6A0F1CB1BEACAD37
+:10DB20000BF8A06644310251A6FAACCC42E72220A1
+:10DB30000DD5AFC41E38246BF5374D94041BCC2B88
+:10DB4000178021407DD7348BE11C45AE3BA262F9A2
+:10DB50004F4D4C499DD833FE9622165E09E30F0ABD
+:10DB600018E19D7CD70B2BD02E8FA7039CC1857EFF
+:10DB700031547C8EB15DFA2DBDF880E049F304D0BC
+:10DB800034BFC1DA2C0094E61D921E1F4BF277BC05
+:10DB9000A943457F280624ED85F98F7CF28DC04E80
+:10DBA000C83707399F2517BCB002E9D291C9F1F4F3
+:10DBB00047F42D43FA0893FF8E713B6A95A8203EE7
+:10DBC000B64673498F3732A90CF1D458794444B919
+:10DBD000BE660FF30B02D2FF7F5B63E77753460EFF
+:10DBE000C7BBA490FC937CFCFEE89A42D181F2F57D
+:10DBF000E01D2F90DEDB724064C8FFA5BF3DF6B08C
+:10DC000003E9FACF56CA37BF524972E327D04E4DC7
+:10DC1000E03F1F482FC7D7CF5BD226E0F944F6FC80
+:10DC2000C82BC3513E8724FF55888FF91D0184936B
+:10DC300052CCCFD99CD3A3F44E88825A0D6C522576
+:10DC4000A4A5CDBC9CDD944AFBA8D1D6CE866B6042
+:10DC50007E8F3C2931D497266B24631EF46B7AD1D6
+:10DC6000899AA0D7FEE891E9D10C94E3499514066E
+:10DC7000DD6B7E6F67703EF44D575E1D0EFDBA265C
+:10DC80007358DA43430EA0BC449B19EF553854AE89
+:10DC9000E7D649E100C679AFBB2B68C1F199B67FE1
+:10DCA000695C52F138C2F984A6F758E57C7AAFC4B2
+:10DCB000A7F18BA38A9524DA673DE049E2F12DF7BD
+:10DCC0008B07903F7C0146FA43AE8A4447687A1935
+:10DCD000272EDFF75C23EA17E76291D6B14EEAA858
+:10DCE000C17725D6DDC5E41AA5777FFF68FBE51966
+:10DCF000567E2E8A384EEB5907B9E440BEF9E62726
+:10DD00005E4708C71DDFB38E247D1D059D94D7E7B0
+:10DD1000B12D10F95AF3D8A0AD634D067FA7C851B5
+:10DD2000D849EFB3C4CBFB958E77E8FD9830D8EA9D
+:10DD300026BA8F16B906F3CAB322E3F7B58CFCDD19
+:10DD40002BAFD155FC7785C58C938374C7F10C74C8
+:10DD5000A7D94FC077361401A2F215F93142FC9DC4
+:10DD60009C387AFCA7CBC5D87943FFC90D4CA0B825
+:10DD7000B8C54C29CDE82D179926176D4C8DA2FCFE
+:10DD8000FBBF968B2007492E36C34A07C34E25B9E1
+:10DD9000BDE90ED4E3BA3C1C8F38C177A254F375A9
+:10DDA000A585B42FA27CD1C3AF36D37B43A276DE48
+:10DDB000A5C105DD500897CF3D8A419F3E84FF8075
+:10DDC00075EC6E4FBDB610C6DB589E5B84FB0B7BBB
+:10DDD000E845B20F7C853C7EC557C5CFCF1D797312
+:10DDE0001F8FBD17B730C342F4B750A7BFAA900723
+:10DDF000C75987FDA27CCEB390BE7C8445B83ED483
+:10DE0000ECD3168F1647ACD1553C9FC4CBA771BF3E
+:10DE10007397A27CCF10AC32EEE7503F1F4C37EA2D
+:10DE20006BA4175D5FB774AC74A13F2C47F3F7E7A1
+:10DE3000D88C710E45995C5F7FA5F901568B95B41E
+:10DE4000DF544B45DAC7E9F477418FC7C1311E7EF5
+:10DE500048A8AB26507C0CE5534ABA19F2EF56207D
+:10DE6000D90D5066CB5034FB402638B7FE581C8B7A
+:10DE7000F272777B851DFDEB82CF7635EE0FD70BE7
+:10DE80002C8A72737DC9EB1457D254053DC3A29CF2
+:10DE900005E22CCB98DE78063EA6FDAA43B576A017
+:10DEA0005F2B126DA3B885A6F0A1998CDBB10CE3B2
+:10DEB000529A0A56662E44F95E50568CF86DADB7EC
+:10DEC00050DC8C5CC012FA11DED7F631DF548F398A
+:10DED000F4FDE5E2C4FBCA6B32F9FE362281A8826A
+:10DEE000F96415887EE4FFAC3A4BC2795CAAE1295B
+:10DEF0002D93DF0F6BAD3F9441EF63899561D61F82
+:10DF0000BE60FA2BD363F031A90F7C78747C483A59
+:10DF10003E5CB3880F3B3B442E6F49AFAD63F2CDFF
+:10DF2000A81FD54A0BD9B18D66BE2F6F2BD4F842EE
+:10DF3000B6B522B17D53BA4E5922D23D1CEF449161
+:10DF4000F6898EC5CF515CD323ACFB1594778063E3
+:10DF50001A2FBE7D79A6A8C15111FCB49FE67804A2
+:10DF6000BCD27C36E7A7B7C6F2E9039A1DFD8087CD
+:10DF7000F3E9E6FA87884FBFEE3C75B95DABD9D1BE
+:10DF80000B02410BAA0355289B9A81FAF331E6470D
+:10DF900038319393ECF20FB1498C5FF6CEACE0C20E
+:10DFA000CC98F345395049EF165E89EF0A41FB0FD3
+:10DFB00022FC3EE80791E74BE8DDAD2023665EC01A
+:10DFC0003A04627290A1DB21EF912254EE990F7313
+:10DFD00071D1ED48CADB6CA0176142A7ABF9FD8B8C
+:10DFE0002EEDBDC8C7B5F7223FC6F721211DDDB212
+:10DFF000BAF4111C4F918228334EE27B9178FF795D
+:10E00000E25B14177D0A646D930BE3617E5542F762
+:10E010004FEE65B23809F36B4B31EEF9CE97ACDABF
+:10E020003DC98E9578EFE55111D60D6DD648A0EF1C
+:10E0300087615183501943C7BB2EED48C173BED3CE
+:10E04000911BFBF51FE3FD417A2F3393E369836353
+:10E0500029DD2F9BEB8CFAB0FD81DD4F3CBE09C65C
+:10E06000FB78AF8DDE35D9E858EAC3F28F1F7ED337
+:10E0700087FAE2F4DE372D89CE27974891A9788F69
+:10E080006CB13A88AD84F99744665928FE64E7017B
+:10E09000BA9FB6440E5AB0FFC52DBB293F65E71F96
+:10E0A0007C58FE6626D713A733823EF44BE4B5585E
+:10E0B000A322E89F5DB9A18509CFD933456DDE2F35
+:10E0C00051FF1B1D2F1D42BC9C7ED84A7EB7030FFB
+:10E0D000FF96FA3DB5F7459AEFC7BBDEBC15EDE9F3
+:10E0E000C58CF9519E9FB66B7E3D5B474AECFE7630
+:10E0F0009F060F3D7F3A59DB07670D504F3B8F61FD
+:10E100004E803FDD1FE848C1FB851F9B831684C7F7
+:10E11000228407A425000794FB8B2202CD73514B68
+:10E120002BDDB75AB487FB071701BC082E2D0768F3
+:10E13000FE4732B9DC38B5F78F3E7A9F628F95F68D
+:10E14000CFFABA1739833E848FBE5E80035FF7AE85
+:10E15000AF87A7B93A9E5AFE40F35ABC87CF6BF1FE
+:10E160004E3E8FB97B004F4EC4D32CC2FFA9BD4C8D
+:10E17000C17B305DBBDF3C89F6CCE9BD3605ED0ADD
+:10E180007D5E59206E53C6221F717DCCF608A48F88
+:10E1900099D441E7394B6459C6F7092E94872D610C
+:10E1A0002E4F3B4A8742F9D30F8AF48E25932323BF
+:10E1B000D1BFFA61A67EFFA7C3877EB15D9786882F
+:10E1C0003E3F4AD6E02D75F8307E66C3D0E0879991
+:10E1D000B1F878F7C591B8EE15A6CADF7A719C2719
+:10E1E000787CE8E7B9957FBD9FE63DCC70DE189F4F
+:10E1F00002DC52F0FCBB406441BA97BCE7E5A4D80E
+:10E2000073E82F33B9BEDAE87887EE239EC6F71C91
+:10E21000693E118AD31A1EA8F0E139DF47CC19C430
+:10E2200073D98F1F7B99E26DBA3274FF5307D53BC8
+:10E23000B5E7E5544C2BB4787816BE91E418C0B11C
+:10E24000C13636917CD4EE1785F9BDB13302084C46
+:10E25000D4135B7438575A6618CE75B81CCDDA9C47
+:10E26000D34EFE9670E2FB66F1F237EFC14974AE11
+:10E270007C8E253E57665A9CDC0A5312C5DF6C74AF
+:10E28000FC8CEEDF56A95619EFAF1CD7E4E27BDA1F
+:10E290007B0B9F27A5A822D0CDF34383DEA169BDC8
+:10E2A000EFE156AC59E243F856E0B9076D6AB65D46
+:10E2B00087F1845D694C7B9F9445097E66BDFC5F58
+:10E2C00078B98BE78B873EB316ED13842FB7531FB6
+:10E2D000BD0EE31ABB7278791996437E566659E1F2
+:10E2E00050EE3711E81C89995D5D36AEC213C1A3AB
+:10E2F000072E12EBD2ED6AA83C7B2823B8427F138D
+:10E3000086D2BE1EFA1BFDEDFB03BCABB6D4FF8567
+:10E310007E6CFF5BFD44482F89417CEB0ABEF9B956
+:10E32000FE7BB494C94DAE6FDFFF3FDA7E852920B6
+:10E330007E8474384824BAD7F9BAEBE11145B8FFA6
+:10E34000B734DC1145B5D9955C6AC980EFE7147E16
+:10E350007E72FB831B0CEFA8EA69FC7BB5FA399E41
+:10E360006598F17C76D5502E8F560DEDF113E2B9FC
+:10E370001C1E57D1C619FE9AD3291486DBE9AC526C
+:10E38000C4F8C382761BBDD77B11034101F31FC5BF
+:10E39000A222EAEFD1AC93F2DF411040BE882926D9
+:10E3A000CC8F63DD3E69189E3F4757A19D76C41D03
+:10E3B000AC43BAFDECE18E770428FF4966F0979DE7
+:10E3C000E8EF1CCAED5427988548CF32A64087A2B3
+:10E3D00063BA2791DCBF004F593A157BDE76831470
+:10E3E00058C7F9224BEE72F4C05997070BB5F7974F
+:10E3F000F4F6279F7C2297DE1DEA7907BCDFFBC07D
+:10E4000073AB163CF8D8B87ECA3539BBAB267C73E3
+:10E41000ACBE6FD3E0BC7DA868B00B6154B2E39E84
+:10E42000BA81DB4FBB2E0DAC7C14E56D8B89F6D326
+:10E430001FB5FC91BF8753C6C8AEEB6BDC8FE2F013
+:10E44000FED1F62732F97947D8A0DF173CFE8B9131
+:10E45000B1F1960066C53D81BFC341783FE457AD39
+:10E4600026A4D232F2C75858258F53C1F90EC3F7EC
+:10E47000B822943A5907A529AC9B5299C9E49F4EFA
+:10E48000657E4ADDAC8CD274562970FB2E44692619
+:10E490008B509A85F629FA7B5837A50ADEF88C89C5
+:10E4A000DFC8C513D361F8DE6E19FF1E171F2421C4
+:10E4B0001EC72590E7717141D28E2A92E7181794F2
+:10E4C000EFEEFD9E822EBF370C2DFD13CABFE787EE
+:10E4D000068E20FD1C7EE6557EBF62AD40F6F50936
+:10E4E000FB748B02A87B3A3540EF80A8222BDB0E11
+:10E4F000FA7D8EEEFFC73F3D4E1881D96C3E151B4D
+:10E50000BFC36CCE023C2F9EAD559DAD9D83CCD636
+:10E51000FC20F8CE19BFA7E7A7FBF6B3B5F387D960
+:10E5200071FE1716B21AFC282AFE03D6313B24D0FE
+:10E53000B9C1ECA4E92F75B2BEE924A63FBAF757DA
+:10E5400011E7871AD09F15979F13DFDE26305B3ABD
+:10E550007EE7F4F4F4650AD975BA3F0B084EA1764C
+:10E560000DD677C92F14BA32100BA7E42CBE6FB5A5
+:10E5700087AE4A49F4EE929ECE01FBCC9CDABB3DBD
+:10E58000EC085DC8F7BA1CD6E93C0737B6C84705A2
+:10E590009684EFAEEAE91A4DDF37DD1F62386F7BF4
+:10E5A000F41E7A8FFA6EAF4ABE5A5B6198EE07246A
+:10E5B00015843D6A82F935E13BCEC05F4DC9C67313
+:10E5C00093C5599CFF1767F1F3DD4317A597E279CF
+:10E5D000F66A85BFEBBA5AE1BF47B03A6BA0F7C8FD
+:10E5E0006D867BF2AB066FA57780EC5F6C63684F3E
+:10E5F000DAA5C4F7526ED2E0BA41ABBF71F056F261
+:10E600009334E4F3F3FDF8FA07F21FA2F71F1B732C
+:10E6100060BF8BE9FD2AF55F9FFF5039B6B7451BF8
+:10E620000DF7797F94C5E59A6D0FA747539E259CFA
+:10E630008BF4208528BE40AFD7D8C779D2B42CAE92
+:10E640008F9ACC61BA27D3A4D9438BB31CEBC82FC4
+:10E6500097D57614F9F55C1EA3F3467BF4493A4747
+:10E66000B01558985DD07E0F00E33B0A23841F74D9
+:10E6700036450D741BF3EEBDA977FF755F853CB879
+:10E68000BEC69C108D3FD07A2FD5E0D9A8E9D746D9
+:10E69000BBF11C6DAE86EF2B75B8EC67244FFA8189
+:10E6A0000BD97BD336E75E8FF3B1ED1B108E86FA64
+:10E6B00039AC7C50227E8997FFCE4231EE1D2581F8
+:10E6C000E6756E8FA0BDBBC8DFB1E8B1032216ECC2
+:10E6D000F75F37571CBC1AE6B330E80C60FCE41354
+:10E6E0009BDBE89EFEA217CD149F30BC7316978368
+:10E6F0002DFC7D45FD7DA38B5AAC86F7A696B09880
+:10E70000F71761BC45C73E3AC6E89EB1F1BBFE6E45
+:10E71000C01AFC90204E2DFEDD8175597DBC3B500A
+:10E7200098D84F13FFEEC0CE88487A6339C6B1D26D
+:10E730003E606B29EE7BAA8E09E437E8CD87CA9646
+:10E740003C734C5EF0133DAAC94981ED09F8E94FCD
+:10E750005E4E0FBBF0508DECFEFBD645B330AD6383
+:10E7600078DE547B9724E3B9766D3889EE97D4CA66
+:10E770006218E346BCC9A536F43F329728E33DB49E
+:10E78000A9A6C974EFC972B7348EDE696D5BD881F2
+:10E79000F7EA6A3D12433EF6BA781C01CB10E97DD8
+:10E7A0009A3AF975D76CDCC739F93DBD6C99851576
+:10E7B00001EDBA00C3F365D8AC5446C1F4F20A8146
+:10E7C00028BE77C52659E5EDFC9D99EB8B26901F59
+:10E7D00098FE0EB44E8DFE1AC709D8CA10FF53EE2C
+:10E7E00076933D18F69818C6011ECFCA21385A9262
+:10E7F0004BA36FE3FC663AC8B71B56C554C4C32B82
+:10E80000ADAB665C05DFCD6189E21D0ABEACBDF92A
+:10E810002A68DFDD6AA1FB163A9C943AC9F07E8330
+:10E82000EF3E63DE12F75E85C462CA21FFC72CED9E
+:10E830007C9295B3686C1CAF3BC00FDD6527BD5B58
+:10E84000D709FC49E71F5AFE4F5A7E87394478DFC3
+:10E85000F1B640FED583AD73B3495E3A966E73E070
+:10E86000BEF0283FC7EC4B3E3F9AA5E8EF7CD8B5F9
+:10E87000772AECE8F78AA7A7BA6AE6C738435BB8F5
+:10E880003D6914E2F7B0997E3FA05E938F9293CBDF
+:10E89000719D6EE2D3FA38FAAB37FB0B4250BFFEE4
+:10E8A0004B93B66F3C797D7432863D28B4AF3667A2
+:10E8B000313FB287D9DD9129C33C46BD68F1E3EF12
+:10E8C000334C7DB67010CAF9512FCF24F9867042AF
+:10E8D0007C4955163FDAC9D62AB75F1A87F59C449A
+:10E8E00097679D16B287A42A4788ECAFD6091E25E4
+:10E8F000765F512DFB2533FE6E8D8DD2557DC8FB85
+:10E900006C9758867E578B662FBBBC5C9EBABC0E3C
+:10E910007EBEA8AD739BA4CE407ADE0674837137A9
+:10E9200007EEE3F4BD3CC3467A73F92BC386F4E7E4
+:10E930001F7CBCDAE3CF03C06EBDAF82FCB625F707
+:10E94000BCD78874B73CD926231D9A52866F9C8CFD
+:10E9500074FFAA99EE79D6264F5066C7F4674A9994
+:10E96000E8417898443513E979F8965DD74B939050
+:10E970004ED44D789F7F8CF75FAE9740BEEC4856E3
+:10E9800033F1BC6C82F7619E4F533709507E997703
+:10E990000BCF7BD54C11F253BDAD3C9FAF6EC2FC8B
+:10E9A000F5DEED3C3F9AEBA31F789F24795E6BF672
+:10E9B00097A37FFA19987F613EBE93CAD3720D2E3A
+:10E9C0007AF973F8DD8CEFAAF234BEFC05ADDDBE3A
+:10E9D0003ECA7FA995EFEFA3FF97B476D13EDA1F29
+:10E9E000D4DAB5F7D1FE90D6EE701FE5AF6AE5AF89
+:10E9F000F5D1FFBF6BED3AFA68FFBAD6EE8D3EDA7D
+:10EA00001FD1DA1DEDA3FC2DADFC585CFFEF68F5BE
+:10EA10003BB5EFBEE486B7D05EF381BC427952903D
+:10EA2000DC40FEAEAD55C544FFB5E3B9FED7E9DD28
+:10EA3000A7DD0BE8F0F2B8D20E2FB76F966B745EBD
+:10EA4000724FDEFAC94887BFE3F714417F1CC57BCC
+:10EA5000B8EA3D22F9F796BFC2DF95597E8F44E7A9
+:10EA60001B3A3DEAEDF5F987B579D669E9422F7F82
+:10EA70002F2347F5F8A7C7E847B36CCCDB809F305E
+:10EA8000FEBFCECDF54CC13DA50D786E520B7A067A
+:10EA9000D757EFB444D1FF552F4B545EE72E0DE10D
+:10EAA00079BF2A4BA487EADDA9517CAFB9AEAED8B5
+:10EAB000F0DE679D2CD1FB31926B8A6DB613E5C6F3
+:10EAC0007419E5671D93534BE85C0DF669A84FAACE
+:10EAD0004A65943B392E772ACAE55BB3F9BADA93D3
+:10EAE000BBEC788F42BA5FA4B70286CB12F17B5E93
+:10EAF0009D1856601EEDF272F2BF6E6FD6CE1419DD
+:10EB00003F4FD4E5FC8E9F4D253D560B7A4C213D61
+:10EB1000C60615A5F7DCDF948E8DB2A0DE92334DCC
+:10EB2000CC0C72F9803795C6DDFE20D75BF9A0B713
+:10EB3000F09DB56DC58CBFF3E6B1915FB742629EA3
+:10EB4000C1317ECC035E6EC733D3743FEEB3F3F1B5
+:10EB50003DC418F80E0B19F556CE007A2BBB0AE40B
+:10EB6000654C7DAB4736E49FF26AEFADFA991FED35
+:10EB70009BA9CF6E267D7216F50943FDF2EF49A3DE
+:10EB800050BF801EB1B2DE725097C7BADDA2CBE98A
+:10EB90005A4D6FD4C6E98D81E5EEDF5F1941F42946
+:10EBA0001ADEA1E94BFE2EC73801A04B735020BDE1
+:10EBB000C2A420DDEF1F086E6673998CF6F840F052
+:10EBC00033A77DEA42396D0E4AFEF712DC931A082C
+:10EBD000BE7A3D8B6DE816D46B9F1E5B51807EAF75
+:10EBE00055E68E593B916E854174BF43D1FC0E5B57
+:10EBF000ABF7B113F9F8FB3D7FD95C87BF8FC50236
+:10EC000032F94B324A156C67877DFA60B2E3F87EC1
+:10EC100093C9C1D042B4E75FB428782E70F819EDDB
+:10EC2000FD06AF93E079E7EEBBA89D59A8F4F0F399
+:10EC30007E46F05E9D994A76B9B2C3A6D98D1FAFC4
+:10EC40000FE441BF62A780FAE7F7D95BD7DB501F1B
+:10EC500069FB0198D9F770FF13095BB4FA78D19D6D
+:10EC6000B1DDF8E334DCFF1C903CB176A8E97B53BE
+:10EC7000B2F03C541E25417FEEAD96F5662F968B83
+:10EC80007AFB005E1E42F1A5E725C0C3D3ED5AB959
+:10EC9000EA5E3F05E6B3DBA28F0F06F5441C4FD4B6
+:10ECA000E829793DF6BFAB546F7F7A3DFE3E17CC25
+:10ECB000E75A13ECC1727D9EF5CE8C9EF97AB37D36
+:10ECC000EB6BA0BFD34A670A6EE396B4BE978E7A09
+:10ECD0007B7539BF3F8C0C80FE11FD1EF105BCED2C
+:10ECE000B9414557ECDF0EFD674A21142D33751EDF
+:10ECF0007200DC96ECABB499457CBFAB4CC5F7BB5E
+:10ED0000F4764BF6CC223B67D9FE224A13B43B8CF7
+:10ED1000F767FE817636CBD718EF74F4F5A53B156F
+:10ED2000BC3753D9E034517DC6FD5F89D7A7B73FC3
+:10ED3000BDF3F51FE0786794CEF46BA0F6EA28C027
+:10ED400025413BBDBE7EBFBAD81328F2C1F74F3173
+:10ED5000600CE59654E9C7FA115B88EEB1D9CDA1F4
+:10ED600032D42700FA30C629E869B12F8F9FA3C497
+:10ED70007D8FE7AF888D0D9E8EF2F22E89CEDD233A
+:10ED800036D53106F2CDB04FA98129AD2C3A3216D5
+:10ED9000E3059AF73A49AED7DED5EE2944BEF25BD9
+:10EDA00018DABDCD977664E03BF875775BCA1F43F0
+:10EDB000FA8D2EF7DC1E638779B3791CB7D7152A35
+:10EDC000477EB4033FA23E6E34076DF86E8A9A21E7
+:10EDD000525CB51DCA5FA372AF56EE9F7615EDCBA0
+:10EDE0004419E7559F37675A29EA354F2AFF1DC254
+:10EDF000FC29E5F3A03C2C5B6424AF45D9153723EF
+:10EE00009C9E96FC95C87F4F3B9D32C66381AC2487
+:10EE10007D20E5BB293ECBAADD77F216713D7F410F
+:10EE2000FFF9B81EABF3F138FCE6E48E1B4AA05D97
+:10EE3000D2BDA2AC42FF8D773F5486F1895BEE3E96
+:10EE4000F2078C6F6D4A97E89D815D35D100D6EB56
+:10EE50001658471BFE2E52D58C0EDC8FAE658A826B
+:10EE6000F6FA2E614608F573779AC4DAA07E529EB0
+:10EE7000315ED559688C97CA5A6CCC376607EFF665
+:10EE8000513C5071098E9326280A3E1D5CDCC12836
+:10EE90003E3F3D2F4FC6B8EE94E2B838D8C9C67E83
+:10EEA00052A718CBDDD3E3E2B66E32967B6E31E625
+:10EEB00033E718F3EFEBF4E8E1E70FFAEF3D6CB955
+:10EEC000FB71867ABAF18B4114CF8A7044BB3D69DD
+:10EED000B8E4C77311AFA56326C6C1B19149642FC9
+:10EEE0001DF4253105F2D6A58CE4A935357200F75D
+:10EEF000AB56512E534943450EBCEDC6DFEB32D124
+:10EF0000B96C3CFCBC5EEE1F7456F2DF858B485139
+:10EF1000B223ECF70C926BFCB8758CF3C32E8EC940
+:10EF2000F378EF2D3EED1CC5A3C7A9115E6165887E
+:10EF3000B7498C7E3FD27BF77B6A14E6B156C9ABEA
+:10EF4000443B63B5D849E3A815CE20EEBBD330CE01
+:10EF5000DB84F1DE2AA5F1F8D8A9D197C2E68410A6
+:10EF60008F9E5922C58FD41F4AAAC3C3977AEDBD7D
+:10EF7000063D8E4DA7CBBD3E6E7FEE6E17C500FAE7
+:10EF8000C16FC96B437CEBF996A0BB95E2FA8B2A63
+:10EF90003B912ED975DC0E053D40F7B2F538313D79
+:10EFA000AEB0339BD3F707D9A2210E9CE28862E270
+:10EFB000C0E9E8CE8447172119CF7BBC456532CA2A
+:10EFC000999FEBF72F18EF179F2FA47383E962E047
+:10EFD00022CD9F8E76DD606DBCC16E2940EFBBC334
+:10EFE0009C44A8FF20E3F507E7ED5981F7AE7623AF
+:10EFF000E120FFDCCEE11C4FB719EDA1B2D1082F03
+:10F0000001F461566F3A167C2D741E587F2F4BB554
+:10F0100016F5A6EBF1266EFF742F5028CE72203A1B
+:10F020003FE173713F76DA2619EDDBCCBC076BE864
+:10F030001ECCBD4C467D97D9DE7103FABDE2F921A5
+:10F04000EC4819CBE3E4BE991FDE64E2FCC18648BC
+:10F0500084B7F8F8D2F878526FB64B3B87023D90F0
+:10F060008CF701E42B304EB0FB1E46EF0494BED863
+:10F070007CF3BF417F9FE55B6494D7D96F049F7099
+:10F08000C0BC3EFB45301BE5F456A9D3EE8AF17BAC
+:10F090004A22BF7FD64B5E6BF4A1A0DEF0FCE3A951
+:10F0A00017E91B882B92973E4A467FD5B675BFB7A6
+:10F0B000A5FD1FDA2DAA3984768BAF5DCF67901D31
+:10F0C00096FD06CF8FDD9AB15E95106E8BC95F7489
+:10F0D000D03B97FC45D25BDC5F34DA1408639EFDBD
+:10F0E000C54E71773BF6DE321FE3D5EAD3AFA1DF21
+:10F0F0003D1993CDF79D85D93A7F1BD72F590241F2
+:10F10000E49BF8EFC3B3F5F3C4B20F6701FE463FCB
+:10F110006AA1B8BB02B1A22107F9A1D144F8AC3071
+:10F12000294BD7C4ECD3EAD34B2667A7D1BE8005C1
+:10F1300061C3A09C17581098CDE73E5E82F49A0DEB
+:10F140006C86F2255BE506647655120BC6D0A97273
+:10F150005EA2FAF5E981C9D99ADCC3731FB3C6D29E
+:10F160004FA796B159A897E11BEA5DF3CE247EDE46
+:10F17000E336DE8F349978BCC8D5DABACD78AE33B1
+:10F1800016DF7B13A3D631BDEB5FAFC149B239A304
+:10F19000A641E8277BED28DDBB8C3B07C6FD2DC5CE
+:10F1A000E52C66E40745B850FE4E99BFDB5DC5E32C
+:10F1B000016AEF63029E05D46AF754D45BF9EF0E3F
+:10F1C000B34040C1F755688BA9E0FFA2C4BF1E1B26
+:10F1D0004BC5FA19AC83E218593B5378BC84F1DC77
+:10F1E000696B1FEF40E97E00A9CA44FB94512FDBF5
+:10F1F000F9EF4355317A279CDE6CC2FDEF7D2C2C54
+:10F20000093D7EB80EAF42EDF4F3D85D5FBE43BF5B
+:10F21000C75C20B6055F23BB21596E43FD9864E4AB
+:10F2200043FDFEDAFD1A1FE2EF490763CE8F7CEA49
+:10F23000718AB7CF66DD35B8CFCAAE4A35E0F982FC
+:10F240005FF6FC50161C17DB6F98F3759E44EF7445
+:10F2500029E77D54BEB55A19A0FFDC3EFACF207ACB
+:10F26000EABBFF2C2ADF16FDD4753D80626BF77B6D
+:10F27000AE32A5C76E8D87B3EF3EA3FCFECEBEF8BF
+:10F2800078720E17BB39E0BE01E066BF5FF4B7329B
+:10F29000FCDD1B63BD6939E75CFCBC5CAF1F75DF3F
+:10F2A00088F561DFDBAAE0EFE818EB9795BCEFE2A9
+:10F2B000E7EE7A7D3EBFCBCF1BEBC5E3277EBE30AA
+:10F2C000AFB4EFC7CCEB0A9BD5505E3EABD7BCD2F8
+:10F2D0007E1833AFAB3CC6FAC19AC4F3BAB6C0DAF3
+:10F2E000EFBCF47ADF9BF8F5EAC5AFE3C669D63E1A
+:10F2F000E0CEEBFFB0FCEBF5FBA3F9FDD7BBAD2AED
+:10F300007E1C95E409C8CD0E944F154C5985EF84A9
+:10F31000336752C2B8E0C91A7F9C423F059E930EE4
+:10F320000DBC89F2F1A497C7FD1E7E666108CF610E
+:10F3300096EFB52878DEE1D5FCD620781621FFEED1
+:10F34000B6C92E8C07147D8A763FAA2307E3F97687
+:10F35000EF387233C93D66B46760BF5682FA1A440B
+:10F3600018DDCB780DDBA5C5C65104C8FEAB17FD73
+:10F370007FA47DD50FF8BE4A8FDF8FB5B3D8841E2A
+:10F380003B4B8FDFDEA08D733E9BFB03C1CE570549
+:10F39000B2F3258A6FFEB9AD6303DE3FFAB9DBED48
+:10F3A000C2FDCC416DDEBADDA8DF6B18322BAFC8D1
+:10F3B00094005E17F44852CF7D098CA374E5E5D123
+:10F3C000BB1868E78D2DC47E395CFF07CA89A75634
+:10F3D00000800000000000001F8B080000000000FB
+:10F3E000000BDD7D0B7C14D5B9F8999DD957B2BBC4
+:10F3F000990D4B1E3CC26EDE8100130831A095258D
+:10F40000448C96D20D3E0ADAE292F094BC00ADF143
+:10F41000CAAD13121110356A44A0800B8A62AF681E
+:10F42000E8450D08DE1035B5B7D886B6B6D67AF9F8
+:10F43000AFC0452A086B1FEAFD17CBFFFBBE339315
+:10F44000EC4E7655AAB7F7FEFEF187B367CECC79BE
+:10F450007CE77B7FDF3973AF893156CA989A2F8555
+:10F460007609F05B666C4D19636EF8C9B2197B447E
+:10F47000EE734B50FF88479255A8EFC9F232368998
+:10F48000B1BDAF994C7E0F638F7D3777A7E81B28FE
+:10F490006F0A7A766079A489053B1DD888BC8CC137
+:10F4A000FDBD36D9BDBE048A529FAFDA09E5DDBF86
+:10F4B000B949703196398A517BB5CDD3D989898CB8
+:10F4C000BD6889BC7A11C7B35108ED82765EEA281F
+:10F4D0009921C1FB0B4F336687476BEFBCEE9193CD
+:10F4E00043189B7C529E86F76BB7BA1511EE37F422
+:10F4F00035CDC07E581353F214C6D2C569A213DAB3
+:10F5000049BFEFA8D20A437EB4C7DB158672648771
+:10F51000A0ECF462FDF292E5C5F0BCC3EF75C07CCF
+:10F52000E7E350E9BE7B8619DFBBCEA2B4413B675F
+:10F53000CD6C4E273C7711FFA60E5CE77FD75BCEE4
+:10F5400060FCF33BEF9C4FFDCA00B24C28DB641A11
+:10F5500087CD2BA7B640393D89D9EC13182B5B2DED
+:10F56000F7DE85FD2F75CA3B01C6AE72B9F7873845
+:10F57000AFA62C5954B0F310C1416F7FA13F606119
+:10F58000D0EF98DD16688CD1DF45F837B633B63C3E
+:10F59000BE2BB65CD21D5B9EF8466CF97998231B96
+:10F5A000CAD814DBF06D2701DE3D87AC0CC7BBEC7D
+:10F5B0004C52C80AF03E60660CE7AFEEB1123E4C0A
+:10F5C0005FE6F0237E9CF920698715CA87DF49A290
+:10F5D000E76FFD173B7FDED4F91C96D5E792193E05
+:10F5E000BF6C4867592A8CFBE5CFC45B02C57C5AC7
+:10F5F000666CFFB9A21DEBB17E6267990CF75F1CC8
+:10F60000CD581FD64BA17138CF17FF2652BB91673B
+:10F61000ACA19DD0EE99FD4F3F87F03AF3CCF0546A
+:10F6200001C67CB969E7C4F558DFE2F4EE84FB5308
+:10F63000CE3C9B138C5A9765BBAD31F35CE61568E5
+:10F640009ECD927FF513B83E47CC844F2B17866A28
+:10F65000BBE1FD954296A2623B16C0D3622C2BE91A
+:10F660006EC0D7292E8EB72BED508EB3EEFAB5664D
+:10F6700093C8821307CAC7D73D4DE3293CFD36E145
+:10F68000F501B36A4A4238AE13945D30FE0376D773
+:10F69000389682D7AC10E2CD3F794D343E98D70FE3
+:10F6A0001B102FDE14959D2C717F8519BFDF5A39F1
+:10F6B000F173EAA15FDF38C6CEFF21E9163F8CA3C4
+:10F6C0006053ECBA178562CBAB113E806F352CEAE4
+:10F6D000BE0FC793BD2683E884D1780A4FBF7B93C2
+:10F6E0000FC63BCCCA9A102EC67EEFC379403B3F73
+:10F6F000FA11B45348CD881745DE9E370DD641A385
+:10F70000AB97054E47F077DB70A0B76502E72FFA9D
+:10F71000FD658671E8ED976A70F2589407C3B4FEF0
+:10F720005619D7FF83BBAB1E39691E3C9E5377FB2E
+:10F73000FD9551F7176D5ADE9B09EFD5ED1D3A4146
+:10F740008C826FDD33AFA6DD0CF7CFEE96146481AB
+:10F7500075739F7A600A3EF78CD889E3C57A3FCCEF
+:10F76000F76CE7EB2E7C6ED156F704D13BF0FEE24E
+:10F770004D57F92B0B07E079A974FA5239E773CB8F
+:10F780003ACD211BD245E75B3386239E6E12943C13
+:10F79000E8A74C0A8A4877CE52BF599DCCD8D40BE3
+:10F7A000FFD63B0CEA1B0F4D2A5B0FF5EB4D81EBAF
+:10F7B000BE8574B75D5476C16B2FFC7A455A306AAA
+:10F7C0007D7A34FC5F7F631DB5A3026EE40153EFC5
+:10F7D00029AC998EE529C54CB0023F769D66FE9016
+:10F7E00003FB636F9B52193B7DF09E719289F8D1A8
+:10F7F000CD482767984B41BA3BE06CFA15F5B7C77F
+:10F800004CFD4DED4E1190FF1E785250D63384477B
+:10F810002CFD9D3EBDDA358DD3F52D01920326E6F4
+:10F8200081F6963C3196F8807EDFB87E4B43063AEF
+:10F8300036E0C5096D5E889AD1F8657C6EC84CD5F6
+:10F8400082F458D70CF2228A6EEA4EB65B98637047
+:10F850003F8CF5E32F43FC05BC645E9AAF9DF80630
+:10F86000FC0936C0DB0FF0570E2F33E8FF5681A698
+:10F87000C6968DEECC473E274872455BE6007F6515
+:10F88000E521E2F367E1E77A05F942E731A47794ED
+:10F89000A5BB50BEC8DDE7B660BD3ACA8FFC68188C
+:10F8A00022295CD9F3C9C47FCF7AC34FD1FBCF8E55
+:10F8B0005554B87D1EE9C541EFB952A3F8534BE743
+:10F8C000ABAE3094CFEC1D5221BA106F7FE6C279F7
+:10F8D0007ED039A4C2E24ACC378C7C134646F07DF8
+:10F8E0000F7F02DE25F9FC661FC2BB0D842ECAB352
+:10F8F000214D254D71D64D7FCF63692AF122FFF846
+:10F900009E43413E9E6AAB7D1CE535FEF9E1FE1F3C
+:10F91000DF18B213D7FF614DAECE17783F7A3B4365
+:10F920007D9C9FBC71383F250CFDFC917953505E46
+:10F93000ECC90964F8E07E46459F5F0478645CCBBF
+:10F94000945678F584A87C5F86F558C0405EE2B591
+:10F95000346841BEC2DA86D278195366203C17CF8C
+:10F9600004F897F032CAB7A5018BB21EE470ADC49B
+:10F97000E15DBB5B08B5C258166C8885C7A20EEB6B
+:10F98000005EE0FFB646D5433F4BA5D01A945B23FB
+:10F9900040F318520EF8F064ECF3CB58378DABEE11
+:10F9A000D98BD67870FE8B06E73D39FE09383F616A
+:10F9B000B68DC6B3728F40F2D563E9247D22B21CA6
+:10F9C000F8318C97FD9AAFC34D9ABED478E77CFF8F
+:10F9D00002B89E6FAEF52F802A2235E4231D2984BC
+:10F9E0003FCB2A3B7B89AF30F9C73767607BCC2F91
+:10F9F0006379A393EB7BECC95791AFFC85C99D88D4
+:10FA000087539608F4FE945F8B3B01C3D94DFDEB01
+:10FA1000172038D679998C707CC71CA079AB4B998C
+:10FA2000BC0BF84A9D2DA0EB5FF2D5309F45AC8909
+:10FA3000E65DEDCBA6792E61ED54AE67610B1371D7
+:10FA40007DCB52105FFFC4145A5FD093983D753040
+:10FA50005E21FCFD51705BB235B6CC9E8C2A6723CB
+:10FA60009CA11C05FF867D17ADFE38707FB45F1E1C
+:10FA7000858AAAC746E3710BE1DF316D5D1EBD616A
+:10FA80005126F2910751211EA635508EFC177E4D4E
+:10FA9000A172B70DDA4F9AD85FA6FAB2D5BCDCB026
+:10FAA000E3C5C0A62B00DCE660A60C8B532B067AC0
+:10FAB0004D00D739B9C1154857B5267F9644FCC4C7
+:10FAC0009F1F8071B066BEBE8F4D682A6A8AA37F71
+:10FAD000E8E3DF2874769B908FECE7FA85B3346215
+:10FAE0008EE6FF1B7C5CBEA7F48469FD232F080C07
+:10FAF000F5DECDC24399B88E9B33BD422BCCA974A1
+:10FB00005FCB34E237C08BF2605DEBF7BDD73B1CB7
+:10FB1000CAA5557DB84C30EFC0F2D7919E2725710C
+:10FB2000BD39B9698709DA4BBFA570422BE0E743BD
+:10FB30003E2FF59334B1FD30B61359EE9577423B25
+:10FB400019AB55DF8A62ECBFA985F0B79AD1FDA148
+:10FB5000DF59D582CFDD378CA58AF81C6B11F0B93F
+:10FB60003543055A8F35F3D99C1FC3556232E99D41
+:10FB700023E6C842CB642C374D23FCF2CAEE9F65C6
+:10FB80006299B5A5805EFDA88B919E39D424DE5282
+:10FB90000DD74727F072EA2AC1BF9388E121825727
+:10FBA000BA955509A9FC7EA89848D8BF97EA43346E
+:10FBB000FEF4E94D25388EF41C7EF55882A65CE8EB
+:10FBC000FFC851736835CCF388862FB7EDA8488FEE
+:10FBD000E6BB47CEDA2413E8754732747DB6DB8185
+:10FBE000FAEC6D25D3D39118B373AB52705D3D59C8
+:10FBF000B1F5E7CDFE9489483F474586EBF7678727
+:10FC00003F05F5CFCB2D7CFCC6753FACAD67E3A7B8
+:10FC1000020B45C9B3C6391F939DD0F8A91473FFD1
+:10FC2000ECDD368622AE5FEE2DE99981CFD5B3BEED
+:10FC3000358887F59DC92C1445179727C5EF57A719
+:10FC400087C64F45A6C6EDD7127BFFD3214C1D12A8
+:10FC5000EFB9B4D8FB308F9872D727FDF3C0FBAC57
+:10FC60003CEC0A809D3813E52894CF874CAA793C58
+:10FC7000AAF15CFE9D93C32ED4CF415E36E1BA9CBF
+:10FC8000F386491E9E67AC0AEB2F37996EA9C6F51D
+:10FC90009522AED9CE817EF47A7C3F7A1DCFCDB14C
+:10FCA000B06E5A9F088D03E1A71630B6E5E04716FF
+:10FCB0002FEA11070F13FC747C8986A31AC56FD233
+:10FCC0005AFBBA4D4057177C9FB51783C13AB447CA
+:10FCD000E70B17DBFD2024D244530C9F482EEDE7A1
+:10FCE0001BC4A61E35893A9F79A872444C999E1F61
+:10FCF000785FA8AE04BE525ACCDFB7649B8EAE4686
+:10FD000059C6DA697C308F2C845F7FD966283BA086
+:10FD10003C36AA2C1BEA3D86FA0C4379047FFEACE4
+:10FD2000B33B0BED5777B6A55A023A3D9BD93D4FF1
+:10FD300080F286565B752594EB4BB9BC6E3828284B
+:10FD4000246E34F835285CEF7428614B6D31C2A104
+:10FD5000AF17F94A5D97200B400F8ECEBDDD54C61C
+:10FD6000F7BC51EF750AF45E5DE77BF45EC2F60BFB
+:10FD70004D44E7EB0B8FF3E73ADF27BDE0DEB6E556
+:10FD800001646CBD662FF105B0E2FCC3E1C586AE2F
+:10FD90006A16740CF0D77399FE5789BF1E1264A4BB
+:10FDA000CF7E3CC5761D0374A13FFFFBB107DF4248
+:10FDB000B523F9B68F5A2478FE3FEADF9F847AE1B3
+:10FDC000EF3539B251081561BF5B58B008E5E0F76F
+:10FDD000EAF30E9BE0B963E6F036E4BDD5D959D518
+:10FDE00012F0B563CEF04801E4FC75D945BC3C3453
+:10FDF000BC0DE1F92FD9A309BEC74686479AA0FCDE
+:10FE00009D9D37F0725E781B96D59D7EFEFCD8F0E6
+:10FE10004811DECF51A755574279971C9FAEAFCE00
+:10FE2000E67AB43EBEDF4FF45764A39E57C7E5CFD2
+:10FE3000BC5BDF998BFC769E89C90CF8F4AEB327C6
+:10FE4000F6EC0278EC6A4E663B393A0624D087D34A
+:10FE500039EA839C6827BE1EF1019F27E7515F584E
+:10FE60008072F2249B77BD6F605DF4FED34737ED5F
+:10FE7000C5F6D3E715931C117DFE67B17FFDFA76B9
+:10FE8000115CE1F967B365CEBF45939F9EBFCB1967
+:10FE9000C2E71FB4F37901FDD03A3BB475F95E3681
+:10FEA000E793DFCBE67AA4E2BB8ADABB49D7C7D7B0
+:10FEB000760E1D0DE3EA105827DA35EF98996A2778
+:10FEC0003D2689F4A10E1C3BD63F941952A19F9B5D
+:10FED000051640FEA2F3930EB73F3335CAAEE928AC
+:10FEE00081B263C08EEDA8F6672679F09A66421D4E
+:10FEF0005FE74F1D3EFE9E2E9FD25B793FE90F16B6
+:10FF0000EDC4F9244B8CE4DDC239F93B5B483F98E2
+:10FF10004DF3677E7FA600ED9D5C9A6D4238EAEB5B
+:10FF20007561A2BF99E62572BB5C5F371DBECF66C7
+:10FF300073BBB95604FD02F04EC90D527BA06F8C05
+:10FF400023C1AEE91BCF22D246C19949E14978FFCE
+:10FF5000FF43786DC7FAAF0AAFFA66E023A62FC158
+:10FF60004734386E14BACDE99C8F90DD8CF7511E62
+:10FF7000DDE10BFE383B8A1EE6DD554F7AA63EAE2C
+:10FF8000E43B5EAAFA0E433AFC80E86EDE3F25931E
+:10FF90009D6BD40375FB4AD7571F4EE0AFECD6E6F6
+:10FFA000A7E87E596D1CC9C5E13DF703BC529953C2
+:10FFB000463E7ACC121EABC0FBC74CC1275EC27155
+:10FFC0000F1365E02183DA6BCE11A93DBB8E272C80
+:10FFD000E21AED19C093758027367CBFDA42F673BA
+:10FFE000873BB47911E2C90D2314D54B7298E859B7
+:10FFF0006D4EA6FACB4DC719FA9923936519F54CA6
+:020000023000CC
+:10000000C02BAAEF989B1F52B9BF40B593FF34296C
+:10001000B413F1AE040080EDCD1D4DF568AF939F94
+:1000200063AE8DF73718AFB85D5DC078BD4FC3DBE9
+:10003000A5D984B769AD8CFB2924FFB8EA287D6176
+:100040004C0EE723C9A5E1177E8BFAE706BB92C7E2
+:10005000B80988FE0FD69E4EED01BE7C48F8C73821
+:100060005E2E78C0B983F33DA50CE17CAFB39DDD76
+:1000700049FE2B338D7FABBD9BF47093CDEB463F98
+:10008000F13C916DCCC7F65ACD32E28911DE2939A7
+:100090009CAF0DF667866F8FF667CEB3AAD62CACF1
+:1000A000BFDB4E7681EED79C97C2E94AF76B227D83
+:1000B000C6930BBA5FF3160DAF06D5AFFFAFBC1AF0
+:1000C00068EFFF6878A6F47C9A37DFC1E78DFE9170
+:1000D0001AFC05FDD6ACB2BF877ED01AD5DC6D7593
+:1000E000211FB9CA1F8EB2D3D8263E8FE09BE610DF
+:1000F000C2A959621B9FC2F551F9FC572E0C2D8DD8
+:100100009ED7160B9F97FA4FCE98796D71B1255FE8
+:10011000CFBCFE3029765EA72769F362B634784FEC
+:100120009373B7343BDF13C6C115E70557B60AE62C
+:10013000553830AFABD1961B4AEBD9148F0EAF4E6A
+:10014000B88EFF4BE6DBFE983FDE7C8DF3DC93E35D
+:10015000AFCA994474D32D970EE0757033CCAB14AD
+:10016000D77568A885D695E327632E05F9D8CA8583
+:10017000302FBCB6A4933F6B9ED5DB857E5DF6C366
+:10018000146D9E8CF8C0CACD23892E016F39DD3ED7
+:10019000C6E3412BEDDCCFB072B9ACA832CEFFC7BD
+:1001A00064074780BF925ED21CCBD7BF180EF6AC57
+:1001B0009AE26838D8B2E617C75977D54AF89C68EA
+:1001C000DDFF8F18B95DC849EC6763AB62FD14E8C9
+:1001D0006FEC2F8B83CB46BF07637FB3C63EAF2642
+:1001E000886F84BF178D47C7CC1A1EDD6927F9A316
+:1001F000E3D131279FAF118F1868D148C7FABC8D62
+:10020000709C87708C1387007CCA43381ED3EC33F4
+:10021000C0A73C84A34E07B734737E6084DB338968
+:10022000F9DA579B87018FBFEA3CF4FA44F3D0F523
+:10023000DB4DC2F2CD889F9B3299DC4A7A70782CD4
+:10024000DA491E4BA808C7B5C502F40BEDD668FD08
+:10025000932703E6F7A723DC2F7A5CEBD738AEAE03
+:100260001CDD2F1AEB376B7445B6A31ED298C4E57C
+:10027000E1B9434EA21B961B9E87FAF7F9035686F7
+:10028000FCB54108E7E373E704FF7C7AAE25D98B20
+:100290007251F7379E7891FB1B5506F62FFAF982BB
+:1002A000DC5FDAA8FE6C0DAEC3C51CA909EDCFC694
+:1002B000AE58FF1ACCCF85F33D67627DF87C83187A
+:1002C0005A8A26EB460BD707369A5827AEDF805D51
+:1002D0007E3C9FEC844C99A13FA8C1F45EFE8A2825
+:1002E0003BBE41AB6FC8E2FE298C47939F1DBBF21A
+:1002F0000D864BC386339F613CAD619F915E62E981
+:10030000A96EA02C5C14B0BDA87ADF003D913D8E93
+:100310007858C9427902FAD57839B9AA2F8471ED93
+:1003200046CDEF3AB4273C03F505676927433EDA2B
+:10033000789ADB21530EEE7815FD6DEEAABE91A8DA
+:1003400092346AF107A3FD33F9E04322FA8774FB84
+:1003500025CA1F55343BC61FB99ADE43FF16F61750
+:10036000C65BE8D796B89EBB51D373411F26BEB972
+:10037000B0BD80F461D45751EFD0FD63A887A03E93
+:100380003A27B7C2920BF3FC6B6E85903B89F74717
+:10039000763F3A5D267F0EFFD2E0A33F877EB2CF45
+:1003A0008F03707D6A8AC1FFBFE2A74309CF0F2484
+:1003B000D05387E6F6FBFFD3D1FFBF42F0A6239EC2
+:1003C0009F1283E4E75FCC54F21F2F45BF3AF1C17F
+:1003D0006EF24BDFDAC494F514470FAEC172FD1212
+:1003E00026AF47BF746590EAD12FFDCDC93C4EE5DD
+:1003F0008DC25F8C034597D96E28C7F0E93EF27332
+:1004000037400B5B14F423C43EDFC842D325C48BB2
+:10041000AE8BD698763A389C6ED1F065B39DFBB71B
+:10042000A7ACDA21B2283F43CA04BFEF1EA4879FBE
+:100430009AC9BFFA9FDAFAEAF0D89353918CEB95F8
+:10044000847E1F7CEE1E2BC9D99326B604F1E541AC
+:1004500037BB6536FAB3EE66FE5C33E2859C15ED7C
+:10046000EFD2AFEB0FD897209E4DCBE576807E3F45
+:100470009263A632F9AB493F4DA6F83BB0A571880F
+:100480008765D9BA5ECCC6A19FFC3D8D3F35DCE8BF
+:1004900008627B6113E767B372B93F6156AE85D6D8
+:1004A0004F2FF7FB8B343C837EA8BDA4892C26FEFE
+:1004B0007743FFF30F697628A3F96E5C9AC4F5E8D9
+:1004C0007E7C37113F4B2E0E5882C44F2A889F45A1
+:1004D000FEE0F0225CAACED42DC579FC714E12C389
+:1004E0007C85055A7CA929D74DEDEAF1A438FAD7C5
+:1004F000CDDD9E0179A3E3A72E670E38F9BC2F3519
+:100500002FC078AD5A5F44FC5B1FC714835E92888E
+:100510002E9AB57533C6C500AEC9C8670F98B8DD49
+:100520007500108BFC569D5ADC12EC64940307F6A0
+:1005300015909E3D5FF3A7829C24FB2A02F282AFB6
+:100540007770F3427CAE338FE2B9EF9943CF3C85AD
+:10055000F2F610B723F4F53870607808E977CA9995
+:100560000B5908FF03A77F341CE3E407B4B8649D6C
+:10057000A53B9FEC7D0BD753EB5CDDF908BF9735AE
+:10058000BCA94B8232DC1F3934F830F21F3DAF007A
+:10059000DF73D37CBC2EF4379CD0ECC8E36057E209
+:1005A000B8805AFA305E0AEB9D89E5C8BA74AEEF9E
+:1005B000C1B8102F4E1C1A4BF3DB68E678ACEE176F
+:1005C000C83F71DC1C39D50CCF1FCF9CC85A64942E
+:1005D000779F3ED58BED6F179955C6BC8D4F3EEE7C
+:1005E00082E7CF839D8B7EB35A53604626F28B17EA
+:1005F000B9BD6E5C07947FD171BC732C92457EBDF2
+:1006000025D99D883FE70E16513E12F3C84C8572DE
+:10061000E37E6EDF18E3CB27CDB1F86F6C17E7856B
+:10062000FEB546FC8DF23DFAFD38ED7D51F99C3961
+:100630009C7F27C063AA37D8931B65A736BE924913
+:10064000FCF8C4FD9FD07AB2761E373D69F6CFC361
+:10065000F1B92BBB2D3551F8F83B8D3FD75AB9BCBA
+:1006600006FE6B89E6377A7D59058B1BDF7F5BA31E
+:1006700073671F977B83EB399EDFCE9E10915FFCE3
+:100680002ED74BED8DD2F2146E677F3A6C45FDA4E8
+:10069000B384F22046ADEA263E00E325FC3CB9399E
+:1006A00085F823DBC0F175D10FADC43F1681FCE0A6
+:1006B000F636CFCB621B78FEC5A97B7C84CF65ABB9
+:1006C000BBCB881EDC4C41BDE4A5B6F75411EAE76C
+:1006D000EF164A30EF6C7E9B8FEC945BF7F9687DE8
+:1006E000A7687CBDD6EAA73C33F6388FC32D78784F
+:1006F00029F5539FCCDC22E97F210BCAE525BB05F8
+:10070000867435A593F3FF3AA9FB30EA91C6BC097C
+:10071000168A8D2FA33C62517A26CA1F66B00B62DF
+:10072000D75DBD24F96B9437E6BCF8F217EC3D4B6E
+:100730001E5F572E27F60A9C6F68F2B71EE52FEA58
+:100740006A9ADCD3E5E6624D6E9E12B9DC5E647D8A
+:1007500088AEC3F37C34CE5B311E4CF1CF8805F5F7
+:10076000934478315C1B978E1723304966E8005E0E
+:10077000D49DEEEEB5929DA9BC8871EEBA55ACDB66
+:100780000976DA22A989E4C33099C9948F373D48A4
+:10079000E34A5F09FA39ACF3228CDD4EB874BD60D0
+:1007A000901E6090FFFAB8753C31EA7F535685443D
+:1007B0008A33E533BAAF5F65D65982E3ADB671FDD2
+:1007C000BBDAE6E816D1DEAC349F8DB637AA257FBA
+:1007D000791EC9CB11EE53638845306C57F1F9ABE4
+:1007E000464F1AD02B934B236BEE87F6CC6C9C09AB
+:1007F000F9A4DEBFE89BB6B818E37A521FD92B2CB8
+:1008000083C9BBA0BFEB8B395C93611D76005CCDC7
+:10081000924AF033DB64778B1BD7BF8FE23291A112
+:100820008CFC74FA7A6D733215F31CAF2FE6F47DED
+:100830007D31F727C3FB14FF3517C2FBD07EC501FE
+:100840003BD1E5C7FB9D2194CF207746B9A13EED72
+:10085000F760A740F9DC0127E929E73479E1D1FD08
+:10086000B56C0DB5779386372AAB188EF60813AEA4
+:100870001D0E6367BA9E5CEF4E14C7D4EA7D7D37C8
+:1008800072FCB592BEF0B13BFC7D2CC37828276783
+:10089000B686578DFBA697DC85FC3BE05038D483A9
+:1008A00025A8FF58C5DB6EB401B06788AB2277225C
+:1008B000DE8F74C85678A572D4BBBF990BE53FECA8
+:1008C00033332BE2CFAEEB52BAF135C99F11183B4F
+:1008D000783C4B43E6E3E1283A5EB63BB65CDF1971
+:1008E0005B6E64D2F17014FF6F7E77E92F5E8BC26E
+:1008F000B7BBF29C9E53C90C7D6FCA45A0A79377E6
+:1009000077B113280BC5EFA6207F5C00E41F4FAF23
+:10091000F8E4EE25BF780D9E932C15AD1C9FBC16F8
+:10092000A4AF1AD01BE2D9A125797C7DADD6A6D380
+:100930003B003ED697AD4A0BBC352B2FB801DF6F7D
+:1009400030457A715DADA3CE8E437F76C5A80B94FA
+:100950004FF0F13F3305E1F4B17D1AE1D3C79BEDD0
+:100960005EB4533BB21CDC0FFB8A1012B8DD326B55
+:10097000521AE68BD05C808F45D66C463E3DD92A14
+:10098000AF9669BA3613AD37586F70EDB0A86BD01B
+:10099000AFDA0106648B82765E9F0B89E197B88E91
+:1009A00088DFE2B3161BFCF4B5F98B5AE0B9658118
+:1009B0002486797CD2675200F1EC5E6C2ACAEED9AB
+:1009C0009DC7E54FBD2D6C9906CF355EB8AD6AA8C1
+:1009D00069C0CF6F3507FDC361DCE6AE92EEE17012
+:1009E0006B71F374B2EF80DF72BE7888F3C5C577A0
+:1009F0004EA3FBC2EC2A9AEF29982FC2E5D5CD561B
+:100A00009AEFA9910EB2B74F6D13A8BC58B6501EFD
+:100A100020E82743A679F0BE59B6B2C1F068DC746D
+:100A2000EF9ACD50FFF34C910980FFEF6FFD09C5A0
+:100A300023DE67BC7F759F487ACFFB72A4AC1BE1B5
+:100A4000E96D7245DB938BB78901E4978BB7DDFEC7
+:100A5000F3C908B7D93795223CA6BA6F4BF33A06CB
+:100A6000EA757D4F4A2D7F0AE972EA67D3FBA6A299
+:100A7000DEB50DE806C62D995810ED8FD7B65D4D41
+:100A8000FAF6E2EA2437CECFBB75D70C946FEF5756
+:100A90000F33D1BCF6084C4678B89BD3F0FE6241C8
+:100AA0000AC4C3AB45793C9E306D9443417FC3E299
+:100AB000B744C217A0B31B318E50BFCD4CFAFC6BAC
+:100AC000B3DFF9CD5CCF009D09B337CD9A82CF3F1C
+:100AD0006DA6E7FBF5A9AD1FBE8B7E01FC03C98E99
+:100AE0007288E067A43BEBA855F9382E23FD2D5EF4
+:100AF000DD94CFE3FB9746876C2BD021F0E3B34026
+:100B000027174D7F171DFEF952E8908D488D91DF14
+:100B100083F99E4ACFE9F1519BC2FCBB1C940FE3C1
+:100B200017805F8FCC97884E46E65BE839E9BF5661
+:100B3000EC7E13E0F4785ED0928F7A17F397A07C66
+:100B4000F646E40A74C53A34BD916DE5F9E1685F93
+:100B5000E0FA6F1CCA9E5A1FE59FC9CCD7ECC0BCF7
+:100B6000600AB673EE77177A71BD1AB2CE8E43BDA6
+:100B7000BAF1D33F535E85E320CFC7712811CA5322
+:100B8000327B02848F3ADF6F54B81C32CEAB2D9F7C
+:100B9000DBAD8D9E08B5B3BF80D3BB1E8FDCD29C6E
+:100BA0004471A12D9E909DFB5940DF83F667968A84
+:100BB000C4676CA5AD0CE5182B17299E33F5C22F21
+:100BC00018C6BF7E7EC57405F54A47E9ABD2109CB6
+:100BD00067B959AB7F7E6D36D4FFE28AABC83E5A07
+:100BE00091217A51AF9A599AA392FCF4F3BCDDA9F2
+:100BF0001752880E672D9D457AA53EDE00B3791DFC
+:100C00008027B38158A3F39B675D61F73AA2F0EBAD
+:100C10008FED4215D7ABBD29D78FE57EA1CE622ED1
+:100C2000CFA3E1B022C342FDFF3577DA6484EFD46D
+:100C30002BF93A7CB0C71A5A0DFD7E608F6F47566C
+:100C4000E5737F6BB6740DF1A5DBF658293E7F4640
+:100C500088FFFCAD6B45CA2B5ABA566021E8EF837A
+:100C6000675ECA42BEFE875D2F65D5448D27D1FBE6
+:100C70000BF313F977BB1744DBDB332D3C2EC02677
+:100C80005863FCBB335D5A7EFE978C777C2BA19F0B
+:100C9000FFA72370BC6FF6FBF9DF18111DEFE88F7B
+:100CA0005B29DCCF6F8C57E596FFBB365E9E0FDD70
+:100CB0002C69E355AC3C6EB190C7C5571E1A4278FB
+:100CC00037D3127980E259AF88B216D7F0DBE8FD4E
+:100CD0000C5E9F605ECCEFCFF59491BF89C6237404
+:100CE00009DD4ED757981FE3710CE3FC6A0E8A7139
+:100CF000E3727F2D9079BCB3384276D5F1379EC030
+:100D0000C87B3FBEDB0FFA4CD179F4FDFAAC86DF2D
+:100D1000D7217EC3FCEC6B7939115E27E25719F9B4
+:100D20009C8E75FC3EBE362705F1ED1E5B43B81761
+:100D3000E0E71753987D1894B5F8BFFA2ECF6315E6
+:100D4000A3EC1CA4836DEF3AC9CE6935373D8EFB09
+:100D50007ED41689ED82FB9EA486500B94BD662737
+:100D6000E54DDD91346B07DA7561507005287F928F
+:100D7000746C07EA09CC96C2CCD08F5AA1BD6FB172
+:100D8000C9ADA05F3C96EC22FED2BC8091FC4E67C0
+:100D9000DD82000039989FCDFDB4CB5E1428FF188A
+:100DA000281EF53E2527BE3EBA57A38B5F61020D74
+:100DB000C6E5A7C77FEE60BEEE179382E1283BEF42
+:100DC0005E41F112DF813FCC8F34B3BEB9C497418D
+:100DD0008FFF05C883E1E28FC93F7BE2EEE0E3F1DC
+:100DE000F649E8D705D3E3DBE9AF6BE32B6C174299
+:100DF0006617D1AF69470CFD6A713C679A0212060B
+:100E0000E3B73C4E97CBF47CF94DE8B71F56CEC7FD
+:100E1000E8F28719EA1719EDD7B0E010A4A729E97D
+:100E200028DF562E8CF5A765D4ACCD24BF5ECDF758
+:100E300067A1FCDE6476AC1552F01AEB8FDB64F030
+:100E4000C77D115FC84848379333D0BFB16920FED2
+:100E500047F8D33A5F0E8902CD8245C7B5D35ABD54
+:100E6000BD41D483A6D9949DCA60FA61E54A06CEF5
+:100E7000ABBC80C34FA7E7460D35858302D9A58358
+:100E8000F9A106CFFA11044F7BFB1D64372597703B
+:100E90003F76F2D29A20F29F64E03F68C7592C4D0A
+:100EA00002ADFF146EB7AD147879E5345956E17987
+:100EB0008B4BCB97BD96E767AFB40783D1F1B4CB2B
+:100EC0004D2BA645E7E5CA0CDE473E3C87F737D3F6
+:100ED000B68AE705074147CA1C80638506C7DCF26E
+:100EE000249EA77EBB8DFC5B5BEDED345E9397DBB0
+:100EF000D935EBEDC4EF868B851437E93173FC509F
+:100F00009D36A257A5E76DCA0F1B7E598657F4453B
+:100F1000E1CF6DBC5EC70B66C82BB058BCBDE8BF47
+:100F20008381289897B252F0F656D0BCE488AAE0A4
+:100F3000BC35BE3C2E89CB11303733385C795CCC64
+:100F4000B05E8037DCAF3ED6C1FD462CE825BDCB78
+:100F500030DFC178B3BF10F96D4F3FDE7415C6E3C3
+:100F6000B70FBABDBD3BA3F18579D7A05FF53E139E
+:100F70008BAC8F873F4AAC9D6FCC9333DAFB0DCDA2
+:100F8000D3039AFDA1DA683D2D647F34DC392DC08E
+:100F9000ED8FC216F43F35AE024905EF4C3F28D81D
+:100FA000B0BDC6392EB2BF1BBBF652FCBCA18A290C
+:100FB000388C1ACD3FACCFF3B899C7F14066756253
+:100FC000FCBEC31DDE8EFBF23A96EA793C3CAF458F
+:100FD000ED12B43C1E3DEF2B720CFD9F1D8297FC61
+:100FE000A0FDFBFB60FD79FECEA5E581398B033EBC
+:100FF000B4C42FCF7BE29749932E218F563DD381E6
+:1010000079B289F3685FBF01EB6DB8165A3DA20152
+:10101000E8CB7AD96FF762FECE40BD0476A7AD4B20
+:10102000E0EFABD7DE709544FB72B4F2A147D01F5E
+:10103000FEA09DC5F4173D3EC9D03E9A960EAFFE68
+:10104000FCB6D9D8DEA313B4B2FAB787FD30BE0719
+:10105000CDB1ED11CA68EF6341EFCF3BE6998E0D3C
+:101060002306F476D0E3EF2E9834A0BFDFFBCECC7E
+:10107000F6F1D057B2FC27DA07A5EBE18D1E9E579B
+:101080006BC4F3F51A1F037B7806AAD6F7CE591E58
+:10109000C076FBF3DE0ECEF7A31DACE7BD35AE0A7E
+:1010A000D07E28D0FB1F28C03CDADF9D3D7598A17B
+:1010B0009DF901F9031A3F95B8DF19EC0701F0C556
+:1010C00076F021C21FB6DB1C42D74E875B65888F46
+:1010D0001D878449885F8C3565DD00B03F55E0DFB2
+:1010E00088F33897203EFE7C01B7DB1B0B2B36E7DD
+:1010F00023AC9F1418EAE3EB0BFF487645C3FEAB25
+:101100002645EFDF5BDAF528DF07B6DB1C77DECF9D
+:1011100017883C8F78FF0B143FF9202410CD2D91B8
+:1011200042EBD0DE5CB2C48496152B0DCDA73C59A2
+:1011300036C7C270FC8F1670B834EEBE4EC5FD8443
+:101140008DF00F48806D092C227D7BCB1C9B03E327
+:10115000D88D8535CB89DFC9497E34E58CE3ECCF6A
+:101160007FBB3389F268D67799ABD04E2A03BAF8A1
+:101170005707F2D5A3BE1DC83F874C105B65CC3323
+:101180008CAF7FBF50C4F5873621A07EBB94E2228E
+:101190002C3A9F795417B7BF7A0B2C31FEC9DE0267
+:1011A00089DEBB42ED9B8EB8F68A144E467BB89121
+:1011B000F93F42BF170B38BC1417629DE40FF4DCF3
+:1011C000ED25BBC9E609DF371EEBAF90C86ED2FD37
+:1011D00008E7F6A7933E36A530F82BC48B3231FCD6
+:1011E000C8B7116EF7495A7C89F395ACEB1C13D044
+:1011F000BE327BB83E63077D06F7895CB9EEE4CF6B
+:10120000A6236FF504488F6020E470BFF9749BC07B
+:10121000E32B06BD99C94A25BE3F43F34BE7C16A9C
+:101220009DB2116AB65D1C82FE0C8F8AF07E032689
+:101230003004EAAF62FE365C97BF6A76E4460BD7AD
+:10124000D7379A6CA4AFEBFA70B2A78FECC4FA4E02
+:1012500081FAA92FFC31ED1758A6E5A5F7E7874BD2
+:1012600061CA973F5790ACE96F6DDC1FC5FAC81F84
+:10127000C69EE5EB009A27E5D1EB70D7F3CAF5F6E9
+:101280002C5ABCB45EF3E702C0A8FEBF0A74BD705E
+:10129000B5165FD5F3FE79BF4CF29645FB1D375668
+:1012A00033D647E3F2BA70BCF7A4054C85F0FE7163
+:1012B000C063C4B3E36B9343B8DF6BA3D0E7C7B895
+:1012C000875AC2E319467C4A2FE4FDA6F4446650CF
+:1012D000DED5FE04FB8ABA62F715017F58FE3AF4A8
+:1012E000535AFA8E82F8FDA05B7BFF1A46F9E4C6DA
+:1012F0007D45230ABDFF3BF71529827F275CC71672
+:10130000BAF9BE217D5F91C2D74BCFE330EE273AC9
+:1013100097D92DF1FCFFF0F65D242FAD6417BEFCCC
+:10132000616F1BFA99CF975814DC479176D31B6DE8
+:10133000944F23484D188F34EA034FF8A65F563870
+:1013400009F7A5BDA850BEB0411F48E407A05869E1
+:10135000949FE89AC2AFD70F606FFFC485F87646B6
+:10136000883C8079ACEA21316E1EEB92C244FE00CB
+:10137000FF9C68FDB44DCFF77227C5E43FB625C882
+:10138000F74AA4F74B09F3BCAE21FDADAD3FCFAB9F
+:101390004AD7DF62F358E5A4CFB597F5FEABC2BEDE
+:1013A00098B8FC3F6B74F2C5F3D4EC9804F34B642B
+:1013B000B75D6A9E81110E6D09E4E83D85F1F7DFA6
+:1013C0000258648CCBB7615C1EAE92C054F29FEDA4
+:1013D000EDCF33E8267FF10B05E4F7B226CC33E0FE
+:1013E000F967D2A1022F3E77AF39E0477B46DD6B2C
+:1013F000D6E440E819F49BB41DCA243F1B2B0C8F84
+:1014000043FE28B96764E0B9066D1A7ED67DF93CC3
+:1014100083C791CF19F30C7684263C90CDEDE7BEBF
+:1014200064D0CB76302EA7D483DCAF09E326BF5E31
+:10143000E4FE91A4AF0AB36D348F13AF58775A49C5
+:101440000F57286FA026439451BE7454979D42F9BC
+:1014500075021457A4E3DA5B5791FD9A687D6AD749
+:10146000C6C671F5FB5F769D5E29E4FACE71B4EFD6
+:1014700049D0AAE42F5EB256384CF9BA8638723792
+:10148000F2109213B179011FDBA7513CF6FB0F5705
+:10149000531C56DFB7ABEFD7655ABCC5BB562239D4
+:1014A000E1DD2D84BC3E4E2626B2ED65139D1F0264
+:1014B000E26D0B8A4415A8E632B82D9804D453BDCA
+:1014C0006D504E8779AD93D40C786EC7DBC9E47F3D
+:1014D000BDD7E3D5F65170FB4BDD2090FE07ED92B2
+:1014E000FDACB601DE403BE1421E17F8B490FBA70D
+:1014F000014542341EEDDAA6E551E8FDB53053371B
+:101500005E4D02BFDE2B4B55F1F43BBDBD367393F0
+:101510000DE32D9191268A677E6CF1CFA178606AE8
+:101520003E437BB1CDD9B4B68AD7130FFDD81E097F
+:1015300050FD37246E28306F2A8EF7371ADD18D702
+:1015400075617B6CD918EF379E4350CB8205993972
+:1015500083F7E5FF4693871FAFF769EBA250BCBC4A
+:10156000CDECFDA50FE5E33A89E470CB080E37D347
+:10157000487ECD7657CE2139EC06FD94C6CBC79F69
+:10158000FD0D8F80F4D7E6E6F8F555C73DE81C81E0
+:10159000A27C1A6F1B1A0DD05FDB3A21C4E1C5C7CC
+:1015A000FD65FDD559455FAF9C3A21284F75239EB7
+:1015B00039423F44BF5F6D8B55467E7646D0E87F0B
+:1015C0009D48FC6CCB92542A1F5F9B477EA07EBA3D
+:1015D0003DBD66399EAFF065F3B694228E173F3756
+:1015E000F8E16ACA85A3D88E11EE8850922E7FE06A
+:1015F000D5E9D715CF40FED86062DE74D407D61A7D
+:10160000F2430CF43CD51BBCB208ED0F4B5F2FE747
+:1016100053E17C89F46FBB82707BD47462EF4F100E
+:101620005FF6DA29DFB06155E429F457BABDC1ABE2
+:10163000F0BDB377BE3343F05273A4279D3F5440AF
+:10164000E775D4B419CE41D8109B97C2D6A6F2BC88
+:101650008F8ED8FBB85F3FE6BD41F92AED9ABE1DDB
+:101660002C42FB62EA953CCFEFC3A5268678F1A118
+:101670009DE38F7ABF5393334A7EB45E5BA3D93721
+:10168000FDF871BF9DF0A356DBE7645C8F7AC40F51
+:1016900058B73A0D3F3E7CE1B27CC48FB37B2FCB71
+:1016A00047FCD8686EF7237DCDC90D2E2A82719D27
+:1016B000BC2AD06BE27C29FF52F0F676E3B8FE41FB
+:1016C000FA55475122BDC3FBDDE8784B8F99FBC922
+:1016D000547BEC3EA19E4BF4AB26F68F15E5C6FA83
+:1016E000C70A73E3EA5736FBE7EA57973E0F46FB14
+:1016F000C4F4384C8F33F2C05351F05A69E7F928DB
+:101700002B8B64592DC1F9D5E4D0BEB3DFD9949D9C
+:10171000C2D73ACF183FE02B1772D6B4E338FCDCBF
+:101720006FF98AE4EDBD1CFA7D8571BFA571DEBF3E
+:101730002DE0F933BADDADDB81C6FE0F68EBFDB3FA
+:1017400022FF21B4ABA75EB8487E84D3782E0FF475
+:101750006B0BFD2BD973ECA020D3BE352F8F8336B6
+:10176000EC5FF804FA5D9786B4F8E53E81ECF5A5E8
+:101770004F7E44F5E7BA6AA9DE7150E8C63868E3DF
+:101780000813C96D3DFF41F7FF341E2C21BF8FEEBA
+:10179000FF8171EC473F4DB2276221BE85F625BC23
+:1017A000D720F1F86E8387292AB2DAAE58BF899E16
+:1017B0001FB52560217ADF725008A13D9E6609FAA7
+:1017C00046103C47C894DFA2F18DB78BFC17905FA1
+:1017D000E9F96B7B72FCEF14F1BCB72CCA93D7D636
+:1017E00023D81F17E2FB2CFEF26BBECF229C805F3A
+:1017F000FF67919E677B23E9CF7F618194F8F9E7CA
+:10180000219E7FDE9FEFC6F3CCEB6632B6DECDCBFA
+:1018100078CE4C3D9E33A370F9D96D909FD165CCA5
+:101820002FEB8EE29B75521FE5B1EBE7CA60BE5904
+:10183000F4F30DB84F2387E79DC5B4A3F1D37471BA
+:1018400005C57FE2C45DBF1B6D7F1CD1EDAC127D71
+:101850005F4DC482FE9D952D9E08C6118E38B5FD44
+:10186000BE5A3EED4A7BE404FA3F563E934EFB4798
+:10187000FAF5FB3D56CD7FCEF1BE8EFF648D4B8ECB
+:10188000939DDF88FBFA85017A9A99D02EFB692E09
+:10189000C6638EF4DB656FE4E2FE1B9DCFD6299C08
+:1018A0005FD475097C1F5667EC3E9CDCD15FAFBEF0
+:1018B000A03F97E8FD8AD189ECD92F8233E7B7475B
+:1018C00012ED5FD2F8A40E47233FBA54F8E9F5FDB4
+:1018D000F003BA267E6B809FD18FA6FBC3589B4C2A
+:1018E000FE32D0493A319F53F7877D5979F89DD11F
+:1018F000FF33F2F0FBA313C9C3AFB63E89E4C4A51E
+:10190000AECB207988EB332EB13CCC2DFF776DDC4C
+:10191000C63C046DDC863C8423E6C82C7E8E05C064
+:10192000C737380F2121FE7D411EC2DF314F431ED4
+:10193000C2E7CFD39887F0F8A1C75C18AAC3FD6AA5
+:10194000E877E8D965A6F8FB0CD1E1E7F96122CF89
+:1019500027657E3A8FB3D16627FF82317F0E38D557
+:101960009A26D42FCB41EFC7FD3CDB5A492ED767CF
+:101970008AE4ABC47C41D91B273F53AA4EE9F60E3B
+:10198000CE13C3FC773A17E012F3C4F68EEECFD72E
+:10199000F4FD9DF99AFB477F893C31258FF3A757CA
+:1019A0001D7F1A127D5E66453118EAC589F3F47F02
+:1019B000A2D14DB296DF6B935416ED8F4AF4DE2F11
+:1019C00046737BE7554BE4ED4ED4ABA0198C7B6698
+:1019D00058C09A2E1DD8EF7EAA207014F394411F90
+:1019E000A1F53DB7FFB7E4EF7F3C93C99837FFB847
+:1019F00059A575568732C26B3D9F41EFE72ECDFF4B
+:101A0000FD65F9CFFBFF60B9208DF9EF910B5F1BEE
+:101A1000DF1994F7C4E9F1EFE037447FFDFCC4CC53
+:101A2000E341FA79175F28E7BE6E3E63C8D74834B2
+:101A3000AFBF1630C29FC23181EC31E417F3939FE0
+:101A4000F152E55F7229E843088F7D562F929A4D37
+:101A50003BD7826DC8D4FDA2FC7CC1074792DEF95A
+:101A6000A19D8F573FAF439FCFE5630CF8F915ED6C
+:101A7000582537F08D3130BF93D3FCB4EFF75E2794
+:101A8000D7DB22CFF0BC77E3F9134037FC3C0EEDF7
+:101A9000DC5FE33EFA6F1BC7F70F92DF0DFFDBE958
+:101AA000E812E5F7A5CF23D69E3DE2E4798503F65B
+:101AB000EC7FDBBC2E495EEB79C665157D9ABF5F76
+:101AC00060E8EFD7FB69ECE3FB741ED2D653BFFF8F
+:101AD0005BCDBFF7D618FFC388AFA5A5DDDB71BF0F
+:101AE0004A0373318CBB3774DEB1FB4D0FDF7F4B84
+:101AF000E5421EAF640107EDCF7E3C2FB8750CC9DF
+:101B0000C1F01AA4CF511E56867183F585B359AD25
+:101B100083F21042583F6A5578FB9BA59487D58481
+:101B2000F4AAE721975DFCD39AAA521A2FF97F3DB8
+:101B3000D6D8733B0E8FE1F24CBFBE3246D0E2AE38
+:101B4000FE4C1CCFD9257C3F6AA3C72FA31F598FFA
+:101B50007B277BFB286FA0611F378ACAD056C4FA47
+:101B6000BB46107D35EC9B5682F150D6692FA1F310
+:101B70007E7FCFCFD93E7BE730F2374E290CBE8433
+:101B80007CC9591ABA06EDE851D00FC64DCFEEBD4B
+:101B9000A62418876FA68BA92AC695D345D6F9889F
+:101BA0003CC0B7C07E9E4BFEE23511F2633D3D86E0
+:101BB000DF6FF470B9DE78B09A2D740C941D9ED846
+:101BC000FD573F2BBAEA691CC7D363242D2F93E737
+:101BD00081FA400D43BFA1119F7C5A1E68B596E75C
+:101BE000CC54DB407E73F617E781EAE3D3CB7A1E51
+:101BF00068F2A7DC7ECF962D9437E25CCBF92A5BA6
+:101C0000C5286E7045A46F7A0AC029B7A3FB0A8461
+:101C1000530A829DCE7F0DDF371EEE7B864857A08C
+:101C20003F647BF3841ED47FA5757DDFC025F1B6AC
+:101C3000CB15E8627C3C2F7082E480D454887CA968
+:101C4000E22D33DFA7B42E99F4CA8EAC3ADAA7742A
+:101C5000EE1D6BDC7308F4ABCA566760DC217BEDCC
+:101C6000AF282FC0B94F88BB9FADB2D8A1ED635A42
+:101C70009D81710CE7DA3EB51CDACFBE5F609A1920
+:101C80009D2964A07F5832A17CADEDE2E7DBD5B69B
+:101C9000BB2B6C246FB8BF865DE1213922ADFBA65A
+:101CA00009F984D4025A2CCCF3F2621E9FCEEB9039
+:101CB0004D28A7FEED33316E1CC9563CB0DF05C17F
+:101CC000556F8DF466F806F27CF47D2EBABFA75FDF
+:101CD000FEEC9B4FFE9E4BCFEB8EDC4C79839FA599
+:101CE000517C65A68BDB232088B4F35D62DF1F7413
+:101CF000BE8BA6B7E876B1910E8C79D2B9E5C388D0
+:101D00002E808F766E9163F85EDC7CE96689EBDD70
+:101D1000300FCB4A1CC7B40C05FD735F363FDD683E
+:101D20004FF7EB399A5EA28FFBEFCDE7D6EBEB30A6
+:101D30008F3B8EFF43D76BDAF47DD09FF1F3B7462C
+:101D400069F6C4F1F57F1DC7CF39D4F346427495C7
+:101D5000CCC03F097FC257AA8807FBDCA686628AEF
+:101D60002F35503BEBF8F9FEA3D6E6AC2E2FC5ABD2
+:101D7000CC0480F7F103CB4651FC16E8222F0E5D10
+:101D8000BC3FC6CCDB5F974C782C3DC4280B52720D
+:101D9000A7111E4B8F727C7D6F0CC72F3D6F4D8F2F
+:101DA00003BE35263817F729F69FCBD19CC4CFE563
+:101DB000D0F2BF9DCDEFECC1F32EB66B71E09E5714
+:101DC000C6CCA6F8DC3A4940FBF063F7FC51E8BF0B
+:101DD0005BA0E1B953EA63B2239A5E7B68FF60F6C9
+:101DE00021BEEF49D2F254A5759E1D889FA22F48AF
+:101DF000FB24BFD1D62D521E947CF2912A2FDA1DDE
+:101E0000110BE6AD7DD0224556BB497F8AF193196F
+:101E1000FD5E4CEAA4BC9CE6E27FAC1DB2B138A1E9
+:101E2000FEF495F65FB02FF04F7D55BC4EE49FBA9F
+:101E3000F47918F75D70FB84BDC2F39BE2CC2BC62E
+:101E40007FF9B5CF4BF75B1AF3D506D131F77FE8B1
+:101E5000F6901E7F607E35269FBCC72C77A3DE835D
+:101E6000F9B92F28A8573F6D8FCE27FB370DEFFB11
+:101E7000CFFD63213BEED73FAFED376692B216E35D
+:101E8000A07788CE76B4EF5A31CF1FF54B84AF10D0
+:101E9000B5DFE15D27E53D344B7C3F0453F97E8A95
+:101EA000950B9B9EC6F757B6A4CB087FB5A2E979E0
+:101EB000DA2F61628156B87EA27DEF421F8F9EFFAE
+:101EC0009F487E0ECAFFFF82FD0B9909F62FFC8703
+:101ED00086F7850B18ED5F606BFD3B705C1D2D1266
+:101EE000C3786F6A152F8F926CF4FD153BE6510F86
+:101EF000A1FDA694EF1C017862DEB61DF3A887E071
+:101F0000FE127ECEA130BB8AF02F15E0837A41AB62
+:101F1000999F6BA8DEE0207C9A5EC5E397A9010B30
+:101F2000F19FF34CA1BC7B15CF3FF3209EAD26FC67
+:101F30008C38D328FE9A9ACBF5487BC062B2F92838
+:101F40004F9AF03522E879D29CEF75CCF752FE7AA1
+:101F5000FF39870B19ADCFBABC1999F8DD8161D76C
+:101F600059048CD7E872A642C38F8E1DDAFBF5FCAC
+:101F70007D3C0711C7C756F2F7FBCF41FC1EAF6F80
+:101F800096C2748E10E830DA397CBC7EE5DC34A26F
+:101F90001F51DBE7CA6ED2F2F4057EEED4CAB9C394
+:101FA00078BD8BF341766B9226CFB5F76F4F0D69F5
+:101FB000F1029E6FBFD4A49D1FD0CE62E2B91A9DDC
+:101FC000A57EC17E8D8707F2EE899E5BAF9129AF1A
+:101FD000503FC7B1C261E1FBB86CB174F542712AE0
+:101FE000C7FB72C586FDDEE2F3FBC6C6F50F87E6CA
+:101FF00047F395613A5FB9D562B0CBD2395C5D9158
+:10200000ED7CBF97F592ECB2C471C5673263E38A89
+:10201000BB33A3E38AFAFA562CB1105FE9707B5FF9
+:10202000C3FCA32D005A3C17CF38EF2DFDE75B878B
+:10203000ECA8971AEDC12309F28CE68FE5768F9212
+:10204000C00F317F6C22F992204E5B62FD6F8A37A0
+:1020500073FEDB93607F5F3FBC74BDC9668C7BA859
+:1020600097E4F7E9B1FD80F8A0BF5562F62BA16CAB
+:10207000D88F067C90F8A2BADA2AB77A908FFE80C1
+:10208000F8623358AED628BE08E6E865C88F7BEE06
+:102090002EA4EFD9BC76B742D7F376A1531C8FD7C5
+:1020A000C83CD498163F77F8463CEFF9BC3392858C
+:1020B000E743DFF3FC9BDFA1F2D0C8312CB73D270B
+:1020C000CDA1725E643B9E17BDE5B935BC1E696C3F
+:1020D00018633F187BD77754077D7F614D1FEAF760
+:1020E000A5863C7EC3F9B5B8DF14E793EEB050DCAB
+:1020F000375DDBE7CB2A35FF10667A21DD65965028
+:102100009E9E8379F7F561FD082E77A1BE05CF4726
+:102110006DCDF3F13834E37C808DD0F238585845DA
+:102120007F54ABCF4DEFF7EB77FBAC5A1E18EFFFA8
+:10213000E80BFC5C1F7DFF3263F248B41B1D5E168A
+:1021400053D6CF8366923C12CF6F6DD5F0402FBF30
+:10215000941E0C8D8DB22B8F5E754731CEF3C31755
+:10216000EFCA457DEA6AED3B5046BC6A1CCFF17B65
+:1021700075F2DFE6211F7F5B7429E43F480FFE08FC
+:10218000F9C6424FCB2437E04FA53C8DBE373345CF
+:102190009D2B205F715FCFC7E7AE0C080B8B07BE8E
+:1021A00043333428919F9E053B44D4B7879E0CC887
+:1021B000089F3A5B244B82767EE309BE80E3FC787D
+:1021C000FE7BDFA7BCBC61478FE1B99247CDEDD361
+:1021D0005D884F3EED1C6126D1BE9ADEE1A3766A92
+:1021E000DFD3E1FB6BF2042D0EDB5D8972E15AC691
+:1021F000F116CB58FF4DED9CB419323F777346A9C9
+:102200008FBE8F368B4524C487196F075C0CE9E3BA
+:10221000FA6069BC732BF42BCB307BA3E9E71A6F10
+:102220005419FE7DB330B6FC2D25B6FCEDF2CF0A75
+:10223000A2CBD592FF9708CF97052E7FD4C95CFE1D
+:10224000C8AC7335CAC71F35C91328AEEE11542C5C
+:102250008F796918E525B10C9ECF30DA951DE270B3
+:10226000C8D98AF38A809CDFE9C1EF2CF1F3AFD2A1
+:10227000DEB6ECC0F31598D7BB15E9F0457321E540
+:102280006DA6396AFEB585F41927CB233EE5DD4AF4
+:1022900078EDB479F1BB0F879D3C1FA1F52113C5E3
+:1022A0009B0497CDE487E7C49D1297FFCE25D3B159
+:1022B0005E2C83050159DDE3E6DF6D6A9DC4CCAB7E
+:1022C0004B70DD94B7492F72DA28DFBFD255F85D25
+:1022D000AC175D163A0FE2B0B32CA8F5C7B0FD27D6
+:1022E0009D4BE87DE4D16630C87BECDCBF2E827D5F
+:1022F000BC9AF74FDF67135730AD7F1BB360B986C9
+:1023000051FE7E8F5BE6E3BDDD44F110ACBF92C6AB
+:1023100067A37AFDFCC281FDB2D3243AC75D605A3F
+:102320007CAC85CA8F697CB0D52C1F463C55FFC05C
+:1023300018AE47A5EB53A203D1E452E8BC1D3FCB36
+:10234000F5A431EEB380E7C534B91BF3D9C5152E1A
+:10235000B29B51F3C1FAE1F893E85AF2B332CD35AA
+:1023600043FDF98F231E8F125800D723388EEFA319
+:102370007DC2747413E55738025605FAB1DCC4689F
+:102380007D95E4F8FB64C78FE3743A78FDCA323078
+:102390008F4370957BF1DAEA2CF7E2BE9F1EB7926D
+:1023A00011882AC7599710E2CDC0BAD8BA4DE37048
+:1023B0003D142FEA175FDC1ED43B703E1A7F1DA62A
+:1023C00078D10ECD75413BC0F79521F1E7111CC7BF
+:1023D000FD8B9DDAB97AC6FA99E34C5FF73C0DF8AC
+:1023E000F715E799163BCFAF719C61E16B18A79881
+:1023F00005E3730C8C0F7ED2395FD73A4C845FD7DC
+:10240000EAE72D15C6EEBB30EEB3606CD566E4335B
+:10241000576BF9A315C9FF4C7EFC6B40CF47B9D66B
+:102420009BFC835CCCDF9C91D2D2C689A3E9EC42B1
+:10243000E4C73681F8CE3759F71ABC7F7E5AF0715F
+:10244000770EF1FDDBC60DC5F3538305A950FED011
+:10245000DC9EBBDC477CF1F67193709C11A2BB6BD8
+:10246000F17B6C487733436D58863E9AE8DC2DA0AB
+:1024700043A45B9D0E078F1FE8129E1FDEE4A2FDA2
+:1024800050DB58376D68CB60ED02F7B73491DC62F2
+:10249000DE9103F304A29D616BA279FCA44525F9AA
+:1024A00070B5FB1109CB4F2AC1F538AE39E33FA215
+:1024B000F3F259C6FC02B43B61BCF7E13CFEA7C68F
+:1024C0003B789FFAE7EFA3F847D9A3CF6B74ADDB56
+:1024D000A39E24D027609C5EC1A530D01FFBED5386
+:1024E000B38DF21206F6F5466A69FFB09012407994
+:1024F000A6EFEB35F2DDA95772BEFBE17297B29AF7
+:10250000CE39DC4D7669E3F50E7DDF2FE95F8D4B2B
+:102510004CDABE5F81E44A03B3D1B943FDDFAB833C
+:102520003F216DE0BB1E0770FF6FE9E7EDFFF5D2BD
+:10253000FE6275158FD3F7DB77F532B75FF5EF43A2
+:10254000DC9EAD9FE3CFF594E5EC4BD9B771F60572
+:1025500093DEC8524C9AFDCAF5858EC95E59651442
+:102560005FE57AF85C0BD56F4C0AD1F7566AC576F1
+:102570004292E3E3DCBADFD34EDF65B228F9C82725
+:10258000F438EB9CDCE07F225E2F2CF66709309557
+:102590005A0B8F9F021D6CED83B7AA58D393F8BDD9
+:1025A000AE6B58D3AF4D3944076710DFE78CF9881D
+:1025B0007FC76B800ECE623B36C6FD01D76A71A223
+:1025C000973F7CAA0DD7FDBCC0F8FEAE42E3FEAE3D
+:1025D000C09FC7F17896F63D9E58BE13358E936620
+:1025E0003E0E8F28D2382EC41BC7203A6421EA1F22
+:1025F000D6B789F69F1BF0C8381EE1E01DB43F6EC8
+:10260000EBCD4C1627A31CEFB3233C472046E4E058
+:102610003C83C9E327913C0FE2B968BA5D3D68DCB1
+:10262000A283D6F5C6B9FD793AB332CB304EC4FB9E
+:102630007D2CB9E151F47B34DE6C26FE5E7D702C7E
+:10264000E969BDAA55C6244856C9F36B14F80FC7EB
+:102650003587F9AF72433BD7C9D574CEDAF5338DE0
+:102660007939EA3D4DF0FE0D5A9ECF8DD79B8F47AD
+:10267000EB9BE7CD1BCC0807B5D6D1244EC1F6A401
+:1026800081F77D83E132E89CA736CE9F18E839D8E0
+:102690007E6B7927F1A7447C6AFC787E2E14B455B2
+:1026A000F077E6FB5C36FE4BE4FB4CD0CE857ACD72
+:1026B0001CA1F33B5F1FBA78EB729867C10F8BE9DF
+:1026C000FBA557A52D7DF221283FBD6534955F4FB1
+:1026D000BBF9B6A358BF3D9FCA95A68FE6213D140E
+:1026E00096CDBD16BFFBFA9A9DB7939114ECA886C0
+:1026F000E732C6654FC003612A2D117AEE9BE3EBEA
+:1027000027A23FA63289978F94FC760295B3B5F243
+:1027100084974763F935E1A379F1F8E29842A1BBC8
+:1027200008E46D652A7F7EE6846786A11D5F59C136
+:10273000CB639469EB72B0DEF4C779F1F4A505E3DD
+:10274000F97CA75E38DF36C4836161FE3DD297FC19
+:10275000EFD1F73902206F71FF7EA09CC7E102FE26
+:102760001209BF0755E1E7E5E98E964CE483B38291
+:1027700096528CBBCA0E5F1B7E1F31A57CDA245C8F
+:10278000F7E9A06E639C13E86B09C27FCE651F65F5
+:10279000B9482FD5E94B3613BD273EA7B19EAF5B95
+:1027A0002C3D407B2B906EE65C1E2B3F07D1AB018E
+:1027B0000FAFB58DE0780772D15A3E985E8DFC9BC5
+:1027C000ADE914A2E9751BE2A54874BB1AC76531CF
+:1027D000F579F1FE2841192D7F0EFD9E37BFEBA341
+:1027E0003810DC102F8FC337E04FD2F57C3E0A59EA
+:1027F0004EA3FC659ED773F0B7F43E6E071133A964
+:10280000FF8771FE6C0D1FCF363CBF44447B2FF811
+:1028100004F289860CFE9D498CEB239D66E8FCAA98
+:102820002B76BEADE5CAAD6E71F0784D360EC7EBB6
+:10283000357DECADE6C0D01218EC8DACC98CF37DC3
+:102840002CD9A5623CB7B1869F43F92FE9C1271166
+:102850001EA2493D1486F242E6E7DFAF94FCBBC6F8
+:1028600047E95F0DDABA34D8DEA57C36FCC3F351F4
+:1028700006C1A3CBC84763E73FB02E7D9978CDC48E
+:10288000F35772709ECA5A31CE7C98D4B42EDA4F68
+:10289000FFD817FAE919F7B72856ED3C95C8BC6878
+:1028A0007F5CABB3E9F1683B19CC323A07E9484B9E
+:1028B0002E8B8777BA9E7444D0FC5AA0F7A23EF0C4
+:1028C00049D2DF483F018A0998B3D0AF358BF4185D
+:1028D000C16293317E9D519341F8BA09F412F4B369
+:1028E000AB159D39E42FDF2E323CB760000E30125D
+:1028F000DF007E7E383E9B7FF7AB1F1E2AF1518B97
+:102900004988AB5F7D38DEA49D9FCAF79736D8AC67
+:102910003CFF53FB9E859EC7D2602B5ED344F3B32E
+:1029200071FA31ACD3A0BC16639E9C2D9DF40B793B
+:102930000253501E0ECE8331DA092ACDE35BFDF13E
+:1029400005C6F59F3B9DA4FF7C4B8B2F08B33FA58D
+:10295000F54905FCB27A308EE015D05E492D3D2A4E
+:10296000B1B103DF9FC4EF36A13FAB2B3BF87FC76C
+:1029700047C5E3DF9CF434E5851C33F138A8113EEC
+:102980006685C7816416A67CD5068D5FFD3F379CA2
+:10299000204A0080000000001F8B0800000000009B
+:1029A000000BE57D09785445B67FDDBEBD25E924E1
+:1029B0009D104242583AAC4102762721806C4D80EE
+:1029C000880A4C585450841B886C59059D41C73166
+:1029D0001D02880ECE84272A4F511B0444079846B7
+:1029E000D9D4C8B48088CF2D6E336E8F495C5925F9
+:1029F000864171C637FECFEFD4BDA46F13067CCBE2
+:102A0000F79FF73DF8B438B7EADEAA3AE7D4D9EA37
+:102A100054B5D8633BD19825F8CF8FDDF0FF4E49F0
+:102A20005FF61542053C02704088F642ECEE50E439
+:102A3000F052795269C847E5DF7ABB8518807A2D54
+:102A4000B3A89F1049EECC91491E027FF8F1C71F31
+:102A5000F3859882AAEE427CDA5D4BC47BD78BA2C9
+:102A600031564588E4B19A4D73093146A5FFE50911
+:102A7000D1B245093AE8F9687F8C45A4085179C874
+:102A8000160C12BCF055EA84E0858FAA4141708B88
+:102A9000F0AE6944FB80C31DA0F2A1B8FEBF1D4A81
+:102AA000E5678FDABC0EF41BF0BF9345FD96A05F7F
+:102AB000827BAFB1088F539F17FDD727182B3C5946
+:102AC000AD70DFCDC926B85FA8A3A9FDE57BBA9993
+:102AD000EA7DE1CB4CF5B987724CF080862B4CED4A
+:102AE000077E50608207375E6D6A3FE4C824133C5E
+:102AF000ACF90653FB11676799EA4B130A0F2EA630
+:102B0000F91E4C538532488891A2D4D4BE542DB3BB
+:102B10000B0BFDA3CEF66923BD57457F999EEA7442
+:102B20002BF07C668F22DA650A31778DAC37DE9B1D
+:102B300057BF6A790695F383E6E7A5C2DA0AD37B25
+:102B40008B3F99FFD68188FE7AA7145B92A8BCDAE6
+:102B50001B9FF2651C262C06FEA8325DBD61D0E9E4
+:102B60003DD5EB90A4603A2FDCAA04EF253AF6128B
+:102B70003D1F02DD88CE22E8015D657DCB5A351808
+:102B8000A07EBEAB9EF7D6011BC18772D73412FD63
+:102B9000E7D638DC2AD53BD2CCF48CF198E91997EA
+:102BA00065A667BCD74CCFC441667A26F9CDF46CD4
+:102BB00037D64CCFF645667A76986AA667BA66A687
+:102BC00067C63C333D3B5799E9D975B1999E9981C8
+:102BD00005A6FA68FEEDBE62A1A9FEA1B8BD5F6AB6
+:102BE0008487948EAADB414BAF67DD1DA6EF097584
+:102BF0009C7D19E1AB344315AABB950F02F457AE87
+:102C0000EB2A5E5F73880F1E263A9C112B0F6678A5
+:102C1000CEE7878A3DABEC589F3F951F7E0D3EE87F
+:102C2000DBCA07C47789F8CE8FF833E2FCD2A0F371
+:102C300044AB7F9597E4C806AFB61AE5D4DEDF74DF
+:102C4000B192DC1045C5BD8BE2857089E619E0A71D
+:102C50000A91E0BD17A5F3934CF00BFE38D2E97F43
+:102C60007ED1C34A785374BC892879A6D4FF29132E
+:102C7000F35E4BCCA8A2FD849002F9D54934A4435D
+:102C80003EA58B2A05659AF0AE50316E4FE756F996
+:102C900097C184B184E9FD0F4B6CCCBF4BE2FA6F56
+:102CA000015F7E502BF9F2349A0C16E20611B2E164
+:102CB0003B1FC63ED219FD1510C295C1A8ACBB0979
+:102CC000E39F8EF17B85B84934DAF0F19942D8510F
+:102CD000160B0F97B385DF8EF76F16E1E598CC1FC3
+:102CE00053B45DC04785AA754D053E3A3574819C45
+:102CF00015AFB7C3A02F8857435EBF8B7F52BBE38E
+:102D0000DEA2BDF8CE28A7E7D607083FFB2C625EFF
+:102D100088E822C6B5E3710B6B51BF49FDDAFACEE4
+:102D20001296EF2F289A067C07D29DDE8D40725AAC
+:102D3000E81985E67759B227E7DEA4D6F66F782D35
+:102D4000DC9E582FA050FBA777C432BEFA76589766
+:102D50008C79FDD47E3FF4FADFC3B88DF6179BAFB4
+:102D6000DDEE5D701BF5DBAC88AAF53488F774BA2C
+:102D70006438887F68BC196A82B716748B9B71B0FF
+:102D80003DE1A1A283F629F4D2D4EBAF5A0E58D973
+:102D9000D7CEB390C677AAB8311FE325FC7F89FE52
+:102DA000CB9C847F9ADAC9CE5AEF44304591C43F18
+:102DB000FDA35F519BE397E339A0E37F7707ED1411
+:102DC000FAD96769E8E2051DAD0DF94C47B79CD704
+:102DD00049BBC4CB85F05010D7793AF05FE27078E8
+:102DE00055C2678122BFFB79E2CC199534EE9B2D49
+:102DF00045A961D534EEFFE071BB8ABBA663DC3622
+:102E00007DDCCEF63ADE3DD95857171A772DBE4FE6
+:102E1000780AFC4A096ECCC4F3F05380770BB7FBF9
+:102E20005E1FAD398BD4CBCD354A703DD5BFA5E300
+:102E3000F9511BB5C3BA748AE41A1ADFCF862D5B29
+:102E40008776BFD69C3CEE8DC27BD9EA4CD043B08E
+:102E5000BCCFB85B09D6123C4B7899EF4B445197E5
+:102E60001DD42EC3A7A5FA681C7F8EFBFB804C0BDC
+:102E70002FE301EFD177762DE9E0BD17D0D04BE3FA
+:102E8000FF2C921CE87FD278A9776ED6F1364514D4
+:102E9000F13ABD4E5471490BFE6405B59B4AFFC221
+:102EA000FA24B81FC6370DB0AF755D4F170D5CCE55
+:102EB00010EE171BE95BEFD474B8ED766A33C9D214
+:102EC000DCC5AE629DD2BACD64FCF7F311FEBF1D26
+:102ED000F3F6610578BF93E418E8BDBAFD25F1F17A
+:102EE0004445E293D6ED00E081D66D9ECF12B17ECF
+:102EF00046B797FC6775F7FC47EB870463427AAAED
+:102F000010574A51281E3A9D2052689E0DDDD4A0CC
+:102F100023137AFA4EEB0E9A6703D9130ECCDB5FBC
+:102F2000DCF114D58F257D7BAF94AFF1018227F8BA
+:102F300055712FF341E3D2F9F4FCF541544FED5FA5
+:102F4000A911F17904BFE2B3796B890FC79CD50E43
+:102F500024523981E47E985A5F9DB66A34EC83B17D
+:102F60009D488F44E889AB7B98615A089D40A76BC8
+:102F7000747C8FCB36EB9D09D03B46FB36F40EC9F3
+:102F80005715F8BDD1A7EB9FCBC465D03FFBABF77E
+:102F900088CF48BF187A6814CD30947D613D64B500
+:102FA00017CCF631DE3C76AC8F59566A0F7CBBB538
+:102FB0008E1323D6CB4BF90AE3D7438AC742F37F5C
+:102FC000EB901A047EACFEF010E06FE18B0AF3E99F
+:102FD000233EAD02DFFBDAD638077CD330343751DD
+:102FE00050FF9F56D3407AD3FAAD760A3FAD852F76
+:102FF000ABDD0C1FA94EE3F258B587CB13D5595C56
+:10300000FF75B597E1FDBEA25FE07BB3567C63D54B
+:10301000B2D17F15DB478B6AAC02F45A14BF50C2A1
+:1030200036A71B42F8EECE072D7104DF1D54BCD02D
+:103030008BF3770497C34C2BADF7DB5D042FEA9C31
+:103040003CCA85F60F28CCF5730E551DC474BF7E9F
+:10305000EFD3EBC68BD6F9969F5584464B2E7B80DB
+:103060007F39FAFFAA7A108FEB68B59FC7E5AF6F7B
+:103070003AD88EBE77BC7A2CC3FFEE2B5A09BEF528
+:103080008B6FD88E18BFA5C90A3B638C5FF183CEC6
+:10309000C3FD2218247CADB149BDB286F40AE4C058
+:1030A000C87E931EBD5540EE6B0FA29F6B93678F3A
+:1030B00081BD3A615031DBAFD7FF20D87E35F8FFB4
+:1030C00062EBC8231ABECEA0FE4E06247E5A76BC02
+:1030D000CB708B95F04333DEBBA3B454907DD0729C
+:1030E000F61DF99CDAB19DBA53B65B6893ED16EE06
+:1030F000FC75323F57946611A1EF8E131D05E12137
+:10310000CE99F1E8E7849FE35B7F91A645F0D7F184
+:10311000E4D0B71F414EFEBBC5BB9EF954FBEC7912
+:10312000C8D1A56E96335FDB425F3E0C39DB99F464
+:103130002AD757C54D223EABB00B8DF94E687D01A5
+:103140001F8F15338B5CB23F4F6FF91CFCD86BDBC4
+:1031500043DD7EE969ED6F73E8E68F1E061DB67DDF
+:103160009C70198DB78F2A422AE62FE438021B6221
+:10317000B99FB267EE49F613FC94225A54E6F72041
+:10318000F3F3AF6D622AFACD52ACF6C5C9E457DD50
+:10319000B73B03F3EEAD8A2A95D6E5ECDF3C97F119
+:1031A0001CBDF724C92295C6FF82CDFBF51E7CF716
+:1031B000511A3FF5FBE47DE539908725FF32FF3258
+:1031C000E0E18F105A4487DFEDDECEF602F1A477FE
+:1031D00014C9B57EAB5F5A924EED2F5FDB64E948B0
+:1031E000A56F83528BB274CBF6776AA8BF5CB7A584
+:1031F0000AF6EBC73E0F8F2B27B46EBD023DF0C31E
+:10320000131DB12EB3577F53D0515CD8CEF85D97C4
+:103210000F5A8A3D2C17F8FD9DF593DFBD51C08EE6
+:10322000210B06E32DB67B59AFD1B46DC0CF8EEE26
+:10323000EBF0FE2E4B80F5556096B4734E1605FEEE
+:1032400015F32FA7F60182CB7D0D4DB7537D795233
+:103250003711A0F91F092E9A86FA818A70033F154B
+:103260003B1E28EC48F0C9A1C2AB50FFF3769E2E5E
+:10327000647DD8996C757C6F476DEA0DD087D90550
+:103280000354AA2F5243DC9FA894FD55D66F7702B2
+:1032900026D427ABC46749F523F767785AE96369F1
+:1032A000FC4DA695BED79EF429C6BB2633905EE59D
+:1032B0006AD5BF19BEA21F587EB9EF2FC677BEA030
+:1032C00071C13EBB547D69B754CDE7F1A409776065
+:1032D00070EB773B5BC2F3310F5A1DEE007D67A3A5
+:1032E000BB611AB723F8B7DCAFE6CA1900FB8AB096
+:1032F0009E22F57B2DFA754FEE027A5D6AFF0FC5AF
+:10330000FD9DEDB44A4B82D791D76AE74C6D57FBD0
+:103310006223D1EB910E5A1AFAB959B79385D5EBBE
+:1033200081DCBFA3833F3D87ED34D2C316D6BF9D5A
+:103330007322ECE673769BF3D2F4EFEF3AF8BBE33B
+:10334000FD4B6DEFD1E312E7E4F0991C931CAE8DB9
+:10335000B70B1F3DAF5DEDE038863860293B48FE76
+:10336000CA307CC2D2FABD45F1391DA01F6A8568FA
+:10337000135F7B69FD6B84DB30E90D8DE4C0F0B336
+:10338000CDAAC672A2617F621EE4ADF0C77B103782
+:10339000B0082D423F467F87E85580F98D14714271
+:1033A0008BD0B37E9164C7BA15AEE44B9C77F80915
+:1033B000B3FED9F744E4BC87B67C1007138CF0D178
+:1033C00001E585E6F5A23EAF3F605E543E9F5F3467
+:1033D0002587BE3FEC2F6E2BE637CC3AB18BAF1B67
+:1033E0008FFB068C7BF85F2CE671FF106B822F75CC
+:1033F000FCB729E4D8818FBFB107B1FEEA612BD0B9
+:103400003CEAE76707B1DE77D945C009BF67929DFF
+:10341000EDE0FAF8403CE46ABDE20E21FEF482AD34
+:10342000619AF48B847BA30FFCFBE623E0FF1B5A1D
+:10343000EC0AE2591D1DE24BD857424D141B532292
+:10344000BEDFDECD710E157A2397E0C1FAF36976FF
+:103450007E5E6B13AC2703D362795CAB93AA5EEB01
+:1034600047F5AB6B32BC3472F18108AEE886FA3BAB
+:103470005596E7432CEB373E08BF67621AEB99D5A8
+:1034800049E18C4AB49F7F993740FCB0EBEF2AEBBF
+:103490008FD53E7F7AB20B7290E43CD179F5447FB0
+:1034A0007A6C0ACA540BE6DB91E43C3FCFA4765415
+:1034B0007E6493ED3ED4E946984E87BC7DB8A4A7C0
+:1034C00080FC599753703FE8840A27F1F3B59204C2
+:1034D00062DACD0F88DBD14E53836A26F0F29BFB74
+:1034E0007A117CC32CD58D38DDB5F3629A94FE54E5
+:1034F0006A6AD891402F4C19E38FF4D7D7E5F8EFDB
+:10350000079DCB437DBA7F1EC1C7D36EEEF973C84A
+:10351000874FC98F86DFBD2C557B84D7E91E1FB727
+:10352000DB43C6CD8FD0134E4F7FB6B74B0C3F3326
+:103530003C1BF8DDDBEC643BF642FC2084D77919B8
+:103540007DFF418B08819FBBEA7ABD160100D0390F
+:1035500014C37C307692D3CFF12A97653DECE8C74F
+:10356000895ED06F819D0EA617094AA6DF837B3B3B
+:10357000B35E9AA9CBB1DAA9B1FC5EED765BD0025D
+:103580003A2BC1A736E1BD1763587F96D905FB2BAF
+:1035900065CFF7653ED865F7672E43BF7B1D526F39
+:1035A000277812B9FEDFDA09D4BFA0EBEBB2D870EE
+:1035B000AF24A253E7F65A3DE8417C57C5CFEDF260
+:1035C000F9E160C13AAC4B41F64DDC7082857F1D5C
+:1035D000E45580ECA08D5E493F8C4BABEDBC1EE307
+:1035E000D5681CA0B3B843E5F91CA6B58CF91DAE8F
+:1035F000EACCE352268D4DBF99EA3F5B18C771D7DD
+:10360000C34507CFC00E389CA6F2BA270975DF4024
+:10361000AA279DDB702FC195F33F7D73203DADA898
+:10362000FDB0CB1E4F2BDEA72F291F27880FA62FFB
+:10363000B8738248B8F07A9D5EE6804FD9BABE85ED
+:103640001DCE9D8449AE1FCBF17F8879DB73B54FCA
+:10365000C00F95D9646F131F7D6D6F780C7195CF76
+:103660003CDA9FF1FCD4735F6DC273616DEEC5FCF3
+:10367000E16C2C445CA6CC22E34A0FE56A5FE03B98
+:1036800096C604A65F65C8C1F48BCB6E9072F1CE6E
+:103690004BD307C7EA37EE52A89FD2D8FA0A2ED5E5
+:1036A000607FE8ABE34A3841E9CEF8D5B0AE4EB81A
+:1036B000C309A08F6691F65EE9E6E879D25053110E
+:1036C000771342FAA921FB101AD70212BD0FBBF1E2
+:1036D000DCDEDA3EB3958EF41DA6A3707D32E3974F
+:1036E00068FF549F9C7B09EFA5497B7E3324F37CC4
+:1036F000FC45C3C67CCE1F8FBE4E8AC2095827C761
+:1037000015B94E4E0829BF029B63F478811CC7D7B8
+:10371000CF75E071A4EAEBE86B456FF79443B623ED
+:10372000DE833D53FA7BC9770FDABCAC3703A44F75
+:10373000202F4BDB49B8D491E686BDD5510D586298
+:10374000C197D582D70B8D8DD7E5F16D19FCBE21C0
+:10375000D7449110906BA5DBD2D74BBB4EF79B3172
+:10376000016ABFE077B23FC090FFC79ECED0FB9703
+:10377000EB299AAED178C8CE9571AEDAF8FC0EFF7F
+:1037800028BE9995F6F15A88A0076D725D07E2A5EB
+:103790001E21BB256D623FEC4FD84DDFFD3ADE3E6A
+:1037A000D3EFC23E85F9B9F1BD41B9D2EFEC1A456C
+:1037B000F78E6AF34BB097C41382E544F43846E0C1
+:1037C0003DA2DBD34F9FA3B32AE94E8C64F09787C9
+:1037D000F1276CA0CF8776838EB766905C2F05AEFD
+:1037E000BAB5E271974FCB801EF91A30E17B5712C0
+:1037F000C1D9B0B7A4FE3060831ED17CBAE4C3390E
+:10380000198D904FB9D23FA88D49E82F12517609F2
+:10381000420ED4105E514F7A70665136FCE1B1F71A
+:103820007F6E6B9DCF97D57E3FA9A073F09C353EF0
+:1038300027D6E7DCB53EE7AC087AD46ECE3DE4216E
+:10384000BC9FD86C456452D45A83BFB92205CFD5EA
+:10385000504070BD13F83EE1DAF726DACD599B945B
+:10386000A346C8A7B96BC6F84B22E8D077B3992E08
+:10387000FD4266F8F23D66F8E7A4DB31BF9FFA9E91
+:103880002F6C86730F99E1DD839AD51FA19F5C96FB
+:10389000A05341D9A2FE08F91E5483F033BADE5971
+:1038A00034793CC147D6CEF682CC73DF5F920FFAF3
+:1038B0009DDC79F7AE727AEF48B2C50BFFEAB80823
+:1038C000FD713CD1634EFD2ABBD583F99AF97C97F3
+:1038D00045E7DBA7651C707ED05C7FBE7CA8D1E38A
+:1038E0004E222B92AFA2E94FFD5EE7A781952D9E58
+:1038F0007C3FEC9F79E388E1697C8343ABECC27544
+:1039000029FD0418AFD604114EA3F135DD1DCFF10A
+:10391000972B168F129FD1F7CAADEEFC5FD23C6792
+:10392000391577C0DD1A576FDA9E5E017DBAD16D09
+:10393000F1928F23DC83AA0E66E4C19F1021B71792
+:1039400071FDBB96C3EF9F5795C0F8992F821C97C6
+:103950009FB5D4D12A1FE9BF929551E3591D514F0C
+:10396000F398B7D6DC7EC1861F1D91B0E1975E51FA
+:10397000BF4EC57C6FD6C7AD0626B05EBE428F5720
+:103980007C8EA6A46FB6762FDA9D8BF6AB47CA7AEB
+:10399000AB53D7B37EF6F3CA5D760FCB33EBDBCBFD
+:1039A000797F87D621F4C3A1F8393F87BC3BED145A
+:1039B0006E870FED3586BF6C27FD42DEB7A0F6A7F8
+:1039C000D72AACD7CBDB49B8FC09258818703982D7
+:1039D000B6809F9471DA321D1FE0137FC47C40AF24
+:1039E0004858D419F1F130FBBF1555C20B3B4010BC
+:1039F0001DFD06DE783F2A6C3F023D1B50420FFB47
+:103A000060EF99BF53B9E74747247C2EBE4CA4AB67
+:103A1000E1EF07198FAA5DF821C7D5BB62D96E27E0
+:103A200005100BFD6ED3ED6BB122D81EFA6A35F48A
+:103A30001595CB743B3CB04AEAABD549FE5E6ED4DB
+:103A4000AF4AF7020F3728BA7F0BBB3E09F6F53EA7
+:103A5000EEB75971BBD727A1BD08C4A4B07D2DFD19
+:103A600084BFABACEF9AC97E5F0F7BDD170A633C66
+:103A7000AB1FC8647BFD0543EFDD1723EDF9F3EDC4
+:103A80006EB6AFC4FDD27EFC4808E9F7F6D0BE039F
+:103A9000DD67AB45BC1955B2C49F8EEF964CB25B47
+:103AA000400F31EFD2F645365A65FFCD345FC4EB97
+:103AB0003F578A0E5A22EC60679ED40FF905FE4DDF
+:103AC0007A3B2FDA9558DE663C9458841BFEFCC680
+:103AD000B3AAB012BCB1CE115C42AF9474F3F75AE2
+:103AE000988DF7647CEAB04FCAFBB83CE10F52995D
+:103AF0009427F555529EC5548AD132CEF2798CE482
+:103B0000C3E9A2A890F7073C52DE47CFA3B3FE9DBE
+:103B1000127B83793C9FEC67BA90CE732F017F8F25
+:103B20009676C7E7B728ACCF693EBDDC04E7FF4B0C
+:103B30000CC7173FD7F591815FE29F0188A31972E7
+:103B40002B49E797D5F7049F8A217CAFB211DF801C
+:103B50006EC4371BF398EE6C17AE9E96CA74BF41C5
+:103B6000A7ABB82F9EE936C4629178BE2F9DF14C69
+:103B7000EDC55FF1DE188FB4E72FD10F23BA0FC860
+:103B80001B70BE3F66D05B588303FED1FE4DF9EE3D
+:103B9000ADBB02C4FF0B7EFF4082A07647AD75A986
+:103BA0005E7ABF6CE3B2043F9547AC810437F57F82
+:103BB00034A88E0DB681EF453A3F60FF4049C5BE3F
+:103BC000AB94E3C79EFEDBF23B689CDF2AA219F2AE
+:103BD000B162C7F7CBEFA0F91DF43B9B214F8F5883
+:103BE0001B0B2177E717BBAA6ABC58BFE638FE82D9
+:103BF000271F48F530BE031996345EFF1978AF626F
+:103C000083CD0BBFAEE23DD5EBC1BA17CDCB31BEF4
+:103C1000E8F72B439FD9817FB74534771AD246BD49
+:103C20006864395FB9E3D7DFA809288F7E04FFA253
+:103C3000326AFF609EBEBF12BD8F303BCF9CC74033
+:103C4000F8E13C86008DAB27B38B8C3BD73EF5501B
+:103C5000FF26D80D1B5E4B50B25BF70F8C7D9796FD
+:103C6000D0ECC79FF75C785D7EADC78D5BE926E53C
+:103C700098670F0DAC83408081CB325B3801F67EB4
+:103C8000D93A1BCB91B2AD4F6C7A18FCF6A1C3DBCD
+:103C9000D303F8B41DF2A04CF1372B2CDF458292F0
+:103CA000DF4AAFD2AD5F143E02FB3A5D15E3885E9A
+:103CB0000B9E3D23DBFB45730CB52FDDDE5408FF67
+:103CC000A04C735539DBA0D7A8D04BF646571BF450
+:103CD0000A3515729CEAA9EF981E47F72AA243E617
+:103CE000F9EFCF5BF7855D48FFA0B95D92C417F48B
+:103CF0005D65482DB6279EDF9EBE3FE1F93CAE775D
+:103D0000C35FB9181D4701178813EC8E1749D0DB24
+:103D10001F3982E340DF6D8B1204F1FF57D62AC9A9
+:103D2000F78F2E4B859D37CF16487573299FCF7B14
+:103D3000EC36E6C7B94A55AA3B9BF93DDD3288E728
+:103D40009B8E79DEBCF65A9EE71CA1313FCE7B5498
+:103D50002D0A5279C62AC66E6F63DD9CD4E5944362
+:103D6000DCD21FEBE40C7D097AFC2BDDAF0FBC230A
+:103D7000FD6987989418B99FB457978B01113C0C33
+:103D80003D50D960E33885FAF699427CE7D64C6B12
+:103D900015F23D68FE011D5FCA8FD27FF120EFA1B1
+:103DA00012FF227D3AEAED311D1AB3F1FD16FB4DEB
+:103DB000D4EF5FE0277A4DEF31DEBE5AEF88552E03
+:103DC000A73255DAEFD1F3E8344031ECB877440448
+:103DD0003F556EFE8AF949A4A922314DC2D8BF7061
+:103DE000CF72552512DEFEF2DE6776C4BF032916B8
+:103DF000D113E36DF88261E16DEF417BE3FB957BCD
+:103E00001C221CB96E377C11B5AECDF54254313E43
+:103E10002B45A207FAFB2B7B73E10BE887FADD4801
+:103E2000FDCC21FB2B6CB2AF9A0B1F813CD9637781
+:103E300073FC81ECCF7004DF9CDB1FD5F705E7EA4C
+:103E4000F2201A0FD1F2E1AB28F960BC2FD6B6BD33
+:103E50001FD52A17022C4FCB6C22003BA3EC430743
+:103E6000EB8FB2AD723D0A92A73D697D1CDFB2FFB8
+:103E70008F37C09F0DD952C671AF66F93BEF992FAE
+:103E8000785EB309FF315EC8DFEFECF07FD346897F
+:103E90006607F68B57FAECE0FBF3D6313D6F731DE6
+:103EA000AF5458BEFD57E52EE1DB0E7BEB62EB75A0
+:103EB000EE05E46EF20073DED019919D380495EEA4
+:103EC000E2AEBC7F10855F03AFD172F4E93C4F9B3B
+:103ED0007294FEFC5144E0518846E6E36F492E623D
+:103EE0001FAE62C3F7ACD708ADCD0EE2E38AE03770
+:103EF0000C2F835E63F8A52988579E3F6F333EA33E
+:103F0000EBDF03EFD3D08B9EB3B15D50562FF31C84
+:103F1000E93DF63B2A11AFE7D67507335222E1603F
+:103F2000141C8A6AEF8F828BA2DA6B517095A97D7F
+:103F3000D99EFDEC67D1B84DED1C8BAF613FE47CA1
+:103F4000BB22C878ADDCF18D3D00FEE8D46C875C07
+:103F5000B42D1181787ABFF94595EDDE539EE604C4
+:103F6000D829CB62A41D77CAADC349062C6616D3E7
+:103F7000384E05FABB9157D01C23E32DA78A9A131C
+:103F80009222FCF6A67A35C143ED1B83626CDB7985
+:103F900031B58CD74671A17A69CF8D517FD826F380
+:103FA00045ADC241FD35D67CB70DF1A4CFC97F82A6
+:103FB000FD5252737D02F65F4ED577FFD954F881DA
+:103FC000AFAA9CF325027E3BF226664B528A23223F
+:103FD000F0E0509A9F1A9F77F005F857C428D8FF51
+:103FE0002C591965DF88A2C430FCE9D5D1F90D41FF
+:103FF0003BEC9BB9A467218FE6AD35D72FA83FCE08
+:10400000EB6541D47AD1F4B871F47A596CAC179F4E
+:10401000F0E9F9969CD777EA90CAFCD5B2D42696F7
+:10402000A7C8BC5AE4A3B4D4CB7C9D963D1216011C
+:104030003D0F485FB706DE4E603DF5BEB0DD7262F3
+:10404000E7BFE7FF12FCB3EBE3FE8F507962D7873F
+:10405000BD5E00BCFB4F5D3E16E7B71FB5F7FB1911
+:104060003CAEBD0E81719DDAFB4A17D81BA79E7727
+:10407000703EC2A9250EB6D7037BE3396E71AAB391
+:10408000B4876B5FFCAE7F23EBE3A54CC72706D854
+:10409000A55D55FF37D68F2DF50E0FE651B9378E3A
+:1040A000D755E5F331BCAF76EAC5EFF223E371FFF4
+:1040B000D5F918FBF0A7E2C5D467C0BFBAFD5FF918
+:1040C000C2E0276AE02FEF78C93E1B79257FF88F81
+:1040D000FE90AFA79E7989E5EFD7B6C6C710DBDCA7
+:1040E000B6F3C0C3B674C4F5E8631D85B87297F51E
+:1040F00046AC9FF3F122F1708AF08079115EE6C13F
+:104100002EBF103E5EFEA7C5C73733A49C1B28B048
+:10411000EFD38A17C52F9FC773BC8AE62F9FEFFD89
+:10412000AE3FE4D0C5E6FB19E6DBFEFFCE7C95FC96
+:104130007FD6F94A7EBF678087C719CDF7E7F3F5C9
+:10414000EE9F33BC2DDECBE3BDC4F59E99FF7F8B84
+:10415000BF47FCD3CEF762F47E55A777BC1BFBA00C
+:10416000A75EFC8F2EE227CC7BC6FF523E37ECF9D0
+:1041700002D57BC847ED5F13A1F7BC996C95B46974
+:104180008FFC3ADF88A7487F6A14FEE541FB9CA5B7
+:1041900021AC07B227E0C7D4BA720EBC4DF02B6435
+:1041A00027A8BC2F2BE349AFA4F98232BE5B2510B0
+:1041B000CF2AF8D36C865FF75D7900792585AA8CC4
+:1041C000C7ECAFF16E68A079EC4FB2786A091EDDDA
+:1041D00069F6E7DBA9DEDD5175C33FABED94EBF487
+:1041E000448C6FB4CBEC675D13E5275DE531D78F69
+:1041F00015CFA460BF6E6CB64DE07C4E21DA47F857
+:1042000095F3F3DD3CCFAB44DD52B7EBA7E3E939DF
+:104210003DAF92F0C2FB36814EAA9E1767C69B0047
+:10422000DE5280975CB6DF03C27BE06D82ADBA7D63
+:1042300025F4FDC74267FC26F8D10E51100E127C02
+:10424000C663AD427BAB207F58CE93FDE868BC09C6
+:10425000DDAFB6EA2418DD69541878C6F3AE69A656
+:10426000F779DED178FEE978DDD76911F09A16EF9B
+:104270000D822F3A3D9B82386B2DE159515AF169DD
+:10428000E0291AEFBFA1B14A7F5DE2BB93D567C5B4
+:104290003A1BA6DBF3A3AD4912EED4A016F1FA0B3C
+:1042A0004ABEFE8BD70A7B64A42B89F349857ECE58
+:1042B00042D5F7C39161C7E320FF1479B913ADDA92
+:1042C000ABF99C8FEF1605F05B0B4408F15BA5FE84
+:1042D00095EFE11FE17C4911EF6B1EFC00706FA7A9
+:1042E0002B0C7F50ACB59E38672723EE1F75BE623E
+:1042F000C2A0ED2341AF598BE919E2586ECF41AC12
+:10430000C7E2FB1D1ED0AF93B581EBC9D772D70CA6
+:10431000C66E7588E1D812B2F4D3D1EE9591DC7EE9
+:1043200091702B4948B70B29805D6E99AF46CEEB53
+:10433000B780ED4BE33DB5326E22C04F3D5076C3A2
+:10434000F765FBB4D1F43DE4BB098DEDE5D81E1C47
+:104350000912DD9422DE7FEFDA5DE645342F73B07B
+:10436000BF537C77E75E904BE30ACC71EBA103650A
+:104370003CC7289F1A28E5886AF1A6E13BB396F668
+:1043800061FF4B8D2D2ADF093C6E8B633E2F5E7ED5
+:10439000D3F801F4FDE26DEDBC18E6B109DBF3657D
+:1043A000FB69B7BD4FCFB5CD31FCFCF581DAF7F92C
+:1043B000C833503C3376D28359D7EEB7A751175A3A
+:1043C00068E249C41D2704B6BF897DCE0953546EE7
+:1043D0003F41CFFF144BE378DF7C7CE01B6B1A7D01
+:1043E0006F3C3935A86F8A7177B985C65FACC79BBA
+:1043F0006D03E53A546385F68C0BE3EADCAB1B3DB9
+:104400001F2F643E74F4BA1DA9B7EF3ACAEB4901F5
+:104410007E9418F7FABCD6F6F80EBE7BA58E0FF781
+:1044200040B9EF6BC084578E8B97AC7034754F409A
+:10443000690BF7A6B27A7041CA40AA1FD74D14AED5
+:10444000C1776F57C57A1E6F7331C7D9E3B33CA0EC
+:104450008326EA38DF48ACEEC9FB394D2305F34F1C
+:10446000D3AA4C83DE9C9F64F8734D23BD0791BF94
+:10447000D53CD2E95DEF457E4B288C38CAE13572D8
+:10448000BFA66B6DB807E46CB34FEE837CB138D731
+:10449000033EB9F981C909909FB357AB6107F87D15
+:1044A000A5396F49B8BD9C373EBB6EA41DFE6B8914
+:1044B000CB6FC7BCAE1AA4790742FEEBE7222FC32D
+:1044C0009870EEA7AEF875F87D6A02AD67AC3FABA9
+:1044D00027017E7574DE53A59EDF64C0CB52B5C143
+:1044E000F8DEAC44CF363E5FB9B83BC7556F1F28E6
+:1044F000E5AFB0867B003F8FD15AC0FA3C912FF9CF
+:104500006F5CB2BB978BF93746605E4D36772FF004
+:1045100073D3B2180BF0346E89E4E37BAC727D0583
+:10452000FD1E4B80DE8FD1F9777A8DB5681DF5D3EE
+:10453000C929ACF1C9C85BD3DC18C7F840CD61F814
+:10454000D7B3757D357BA53C3FD67594A4ABB0360B
+:104550008C6E47CF8F6CCCCC415EBCC137F5830BE2
+:104560008A0646D07F5C81BFB03D7D679CC5D30283
+:10457000395C324579A9BBE4836B07B23F5FCFEB6F
+:10458000BC85E4842309E7061B248C7C55C88DBABE
+:1045900087FCCE08BFDD2E7670BDBD44E6A376B5A0
+:1045A000876B38FFEA16E15E42F026B223AC362173
+:1045B00036573BB97CBA9AE45D4F21B654A731BC5B
+:1045C000ADDAC365A83A8B9F3F53ED657847F52078
+:1045D000867755FB19DE533D96CBE7AB8BF879B464
+:1045E000FC99ED9AC3F2C4DD8B683DF87CBE99E17D
+:1045F000A17141FE3885FB6EE4D30A29EF92B2A483
+:10460000FC11BA3CEAD647F0F99BDB410FC2BB6D07
+:10461000C5480B9FF7B436A683EFC6A827B6EE466B
+:10462000BC639E8BF3B25A4423AF931661F106F23A
+:10463000A4FC7110DF75BD6B6C66649EFA8DF3147B
+:10464000618DE0AF9BAA628435423FCD5C9C648261
+:10465000A72F7EF7E50EF4FD3EDDB47B41FFC37767
+:104660007DF9E89FE8F9E3771DEB29CFF5FEB02E41
+:1046700032EED2229A256C75F27EFCE377A4A7B6BF
+:10468000EB26BF077ACDC23F3CA04FF3D127B10E36
+:1046900097A9DE25047F04FA103E3FD1E953BCAC54
+:1046A000FBF25F605DFB9D5E85BE73F88EBE858309
+:1046B000A8FDE3FA7E945841788DD43369527F7D0A
+:1046C0000AFD9524F55901E46858EAAD4F7F951A23
+:1046D000B81BF5B724787102425BD1213097E09581
+:1046E0003EBB57455CAF5E2C47DC86702CED8A8064
+:1046F000CDACC71A3B25211E6C9C938ECB0B3AF98F
+:104700009C167584FD985959FB443AE4529DE2C6C3
+:104710007E0DCE753A9321DF14DE1F451ED014D2D4
+:1047200097CF0E54797D9DCAB772790D92E508AF87
+:1047300031C2CBF1999295D41EF2B1CE679F13216D
+:104740007F67E9CF676759B8349EEFD3BFD77185CC
+:104750006F2AF8A323EAB351E64CC5F83ABA0AAD7A
+:104760004AC4FE6FFD402BF7772A5FF67B0D884A1F
+:10477000EFDF9BD5CD7E73369FCF62BD65F4332BC3
+:104780002B677937E8EB9523811D516BF3A6A55074
+:10479000BB97075AF579E8E7C29D323FBBEC027A36
+:1047A000C388D31DC13FE539499EEF826DBFDB86CB
+:1047B00073120B3E76B0FE5A70B9D44B223B983F31
+:1047C00099039AE6B8F8E8DF9D3C78378DE724CE68
+:1047D0003121DEBFE3333BF24369D95425A60356AA
+:1047E0009B90671A1D9F3DB0EDE38436E3E23BD416
+:1047F0004B8B8B2B3F24402F18F319F3E29954D89D
+:104800005995CA59DE67AA7C9124751BF38E8E8B4D
+:104810009F8B9F8B95DFA88833DF79A4CDF87974BF
+:104820001CF0FB81D1FB11AE02C8893387D420F67E
+:10483000D35B823D13451BFD1BF1F3CA35F4523B9C
+:10484000AC4B4F22F6C34E5DC02E1F3E48FA2F27B9
+:10485000F578FBA92D2AFB4BA7B6C407619F566CC0
+:10486000B9FF20F6292B36286C9E978B06C617E1D8
+:10487000513823F518F2DDDAC1B8F624425E19E3A7
+:104880002BFD5D7C15F86A7E48F16FA471B4383D4C
+:1048900089ED23C6D17190E4CF5247289FF1AA8FAA
+:1048A000DB3D48CA41A3DDFCFAFB392E4DEDBE6667
+:1048B0007BE7F77182F30445F39B18DFF1B5B95E2E
+:1048C000EC2BCE0F6DAFE0FC8E2D716EC4218EE906
+:1048D00079CEC6777AE9FDF51A24ED94E3FAFEDD88
+:1048E000F16DF27C3AC689F5744C31E70B66EBEF5B
+:1048F00065EBF87A475FC746FBF9A1A6841ED4FE94
+:10490000AB3DEF72993F48AE97F9AE86FED0BB5FE4
+:10491000ED88E3FDF8AF763C528838F3C9D0C8146F
+:10492000F0FF397F6D904DD261AD3A16F812419982
+:1049300067530EBCE6468EB3DDBA4066E43A93F99F
+:1049400046C7773C9B60C96EA563B9B3CA89F3A11A
+:10495000953B6E29021F1FB4497CDA774C0CE0D8D6
+:104960007365BD4F807F799DA573FB159688760E84
+:104970009B97ED62DB9E623FDA1B71E8853B6D7CA5
+:10498000BE70C6E59EEB6FC43A7CCDC67458D8C7DE
+:10499000733DE72335A89CBFBC305384617F2CBA9C
+:1049A0003D7E1DF6C38CF1CEC895EBBD6C8522FC17
+:1049B00034AFB2A02A342A3B12DD03C8514A6B1C23
+:1049C00080FCC9A6CCE03DBD52F8BC6F787D4A6B37
+:1049D0009E29ADE35E3817593E2899E7FDE0B442C1
+:1049E000D67787ED2200B9107846E6E1947593F901
+:1049F000D10F83EFD15F72B8573B9AEF099DAE6537
+:104A000093C2BD909751F64C3AE7659CB0CBFD52EE
+:104A10003CC77E71590EBD4FED52F47C5EBC9F14B5
+:104A2000C14765B3BC1EB45393BD1E9F0BE3757F96
+:104A3000CD76EBCE7801BBD5B23B5ECFAF8AE13C01
+:104A400072E3BD9A41D22E4ED1E9296E90F9980FAA
+:104A5000DA64BEEA831BD3F97E0CA3FD83366D1A9C
+:104A6000EC27CC03F6FA7C7B5D2FECBB18E39D9F13
+:104A700050C7E33CA1F3F9FCD83A9917AE9F3B46E7
+:104A80007BC04D7A1E7BF3530ECE5F3996DEF02D40
+:104A9000C67BECA93EC88101BEE7ECE17AB21F8972
+:104AA0009E0B9E7684517FF42919B73E6A0B7E0BCC
+:104AB000397CF4D1767C3EEA68FB603EE707286EDD
+:104AC0000BECB3A38A0EDBDC6C5776B5134CED53BD
+:104AD000628505F93B6327AD9981FC86960D0EB082
+:104AE000A738B6E9A154F66B842791F36C0EA9029E
+:104AF000743BF6F4DFFA44DA2F46B9608339EFAE3F
+:104B00002953DA9546FD3A7D5DAED3D7F5C64152BD
+:104B10004F95C7851EECC6F393F826FAB07F470A77
+:104B20003E9EF327B6F65420371E16C19F7F9CC7C2
+:104B30005EB60779F365CF3CF526F66B8F594403D3
+:104B4000EC0FE5AECD3FC7FD1C29BF49643D24C431
+:104B5000069EDF51B73CD74A0B96E73FBF838417C9
+:104B60004CDEDC0BF041D2390AADAF051685FB5F98
+:104B7000B0AB1FE7DB113D2CBC4FB65DD5C743364C
+:104B800025F0B749E62B8F4B0E6E82BDD7FC6877B8
+:104B900081F3EE63D4B5FD41BFD31BE22CE0A7F255
+:104BA000BB87240E01DEDE5205EC8FD3566F87C81B
+:104BB000384234BEA2F3C0BFD5E55319AD3B9CFFCC
+:104BC0002CDDF528DF2F520ABE045E9E56781FBBEF
+:104BD00074F99087984FDFB4899ED4EF89D0FD098E
+:104BE00091F469D4E5E2B9EFD8BDDCBE94DACBF735
+:104BF0005F4BE0716EB2715E4B345D2FF9FDA7D54E
+:104C00004B7AFFDCFC436417F43F1F0FA745C3CF6B
+:104C10003FA6EFFF654B0CFB83E401F039B6E3B62A
+:104C2000D01CCCFBF8D618965FC793A49CF88AE4F6
+:104C300069A037C671CD6F994FDF99CCE7FDE606C5
+:104C4000CDDF35FAFD02721C7CD7CE9B08BFB3FCCA
+:104C50002D290F895E3FE3F7DFB2F1FBD1F338A0D6
+:104C6000BF776E9D6E8D63BE38DE51D2E3F8B6DE3F
+:104C7000AC9F9A92DC82F9E6299BACB785BAC00E4C
+:104C80003EBEB5B7AF36E2BBC793425DDC11CF9BEA
+:104C90006CC1E503A53C6D865F2CC2246AF3915F6D
+:104CA0002458CE1BEF953A5736C04E417E6F7E0E8C
+:104CB000976147F2F979BAE392A53F396CB08C0F4E
+:104CC00070CE6AAA9E4FCE764FC80E39AEE9F66115
+:104CD000D996E83C5F59DFC9789FD65D8A91576CB9
+:104CE000C17843F6348E3708CF3334DED2A5B7CC43
+:104CF00047FE7869D5AA1B613F955AC5583B8DABD5
+:104D00004951791C4D3162E624D89191FD44D86F08
+:104D1000BD079F8BD30A772ADBAD6CDCF71D2CF522
+:104D20001DE03AFA5ED9526525BE6FC8170E14A66B
+:104D3000B6E20979ADC8EF691AA9D75F60DE4D36D2
+:104D4000591F3D6F633C23064B39D594E9F9ED506B
+:104D5000D0E50D95CF779DFE213731B90D3BAD558F
+:104D6000DFDB5BF36C69FCE3605BD377DC83A5BCC2
+:104D70002BA5F1619CBDD69AF3CAB33698E1CBB6A8
+:104D800098E1EC1D66B87FBD19F61E30C3797ABF75
+:104D9000F0B3716E197E364AF8D91E87F4B301C399
+:104DA000CF46093F1BCFE16703869F0D187E366013
+:104DB00003DFF0B701C3DF46FDAF743C097F381550
+:104DC000F99A151699E74BF4F0F339A66976D3B939
+:104DD00094532FCA7329C40F52DECF77F13A791852
+:104DE0002D06432FC9F594F2BC23B884DE1BE1D114
+:104DF000E60EC67A5DF3CD1CF05D45B746CE7B6D01
+:104E00005AF64AAFFBA95DA3122F605754ACF9665E
+:104E100006ECA8248F568EF695B10DCB0772DC3EBA
+:104E2000CCF2A3B1C6F3D60849478EBF14ABB8295C
+:104E300083EAE725B7993F149D772E569AF3CC2F36
+:104E400096771ECD07861DF8B8AD39DDCD7EFAD038
+:104E5000C710E75DA8C4BBE1A77F162396E0FEA0BC
+:104E6000C0AB324FADE5904DE60DAC54D68B08FB90
+:104E7000E4D73ABE0D78F6D95CB6C7CFC12B158BF7
+:104E8000B85C881E5A7313FCEBD3F32C6C779F9E8F
+:104E90005750D81EF61FF9655813B89F2B72BCB82F
+:104EA0009F2B927F703F97F9DC4447537BDCCF65A3
+:104EB0003E377199A97EF2CA5C537D49D110537D6A
+:104EC0000F21C7B768BE1C5F09E9077F3BC04B389D
+:104ED0006F71116847764A1725B09CE5F23A85CF85
+:104EE0008D7B16AF28045E4E103B238E60F0CD6C98
+:104EF0005DBF086BC00EBE3B9322EB8F2A0D5FDEB9
+:104F00004DEF9DF4D56DC2D529272D6B1F1CEA41AD
+:104F10007EFDBA2E6E5A87B72AA154889E3579DA5B
+:104F2000AEC1ED919FD23891F713B7B74FAE81DD87
+:104F30007968C09B83D0DF1695F3260C7EE96293D7
+:104F400071BA75838866644FACAB93F9BCEBEADA4F
+:104F5000C5F688D87F31E6D9023A08944B525338C7
+:104F60002E241A300FB2DB97C06E3B7D48DAEDC6B7
+:104F70007C7A2C0D775A44F5B76E8F61FC7CAEFBC2
+:104F80000D27FABCD4DF83F31BD57BBAA8B0072C5E
+:104F90005B36C18F70A4686F82EFE7ADEBF927DC59
+:104FA000EFB5E07D55E03CCD17AB47250CA6EF1CD7
+:104FB000DB6AF38E23F8EEBA27ECF093175883766A
+:104FC000CEC37C6A9D1D79C9576E5EC7CFE76C2E34
+:104FD000E6BCCBB9A28AFDC823FAB92C63DEF30A7A
+:104FE00094B56EE22FEF15920FE7C5CAFD3CE2E7DC
+:104FF0009731AFD39B151FECC72945DBEDC5D0CF4B
+:105000003ABF7AA64E1D03FE6B09C9FB395A5E579B
+:10501000E5BD63535499177381FB7C269FCD64FED5
+:105020009E72B62FFB59D786FB483F365BCA8F96D8
+:105030007A95F7E35A5EDF9F3219DFABB7F1EEDD09
+:105040003C7B833CFF6F11553847E099DA20F92A01
+:105050005354C1FE5BF4C6BB07B1EE16653A3D582A
+:105060000F454355137F568E8E33F1EF54916C3AB2
+:1050700047731D924A22E029E3BA9BDA5F3FA56F8E
+:10508000943CC869AD67797045D439C002135C4E51
+:10509000E59D904FE26AD37BE562526B3BF8C31B00
+:1050A000A4DD5ABE23693DF6C5E759A43F345593A4
+:1050B000CF2BF6C8E742C49E3B978EF3F8880F9833
+:1050C000CE6DEBFB7CE897E381DD1B38AED39C4EC5
+:1050D000F292305A9ED568473C8DCCE566C449CBE8
+:1050E0000304A35FBF68AEC5F911ABC4AFCBEBEE51
+:1050F000B624BD952F2A7698F3AD2A0EBDCBED8C44
+:105100007CC6E87AB2D39777C4B8C7293E3E37B990
+:10511000A5C98E78D014AD13DF4B117D5F5A59A805
+:1051200089C779ED9E5437F66D2BA2EE495B7885E1
+:1051300047EA273DFE8F7B86A49DD06097715BD7A1
+:105140003E0BAF3F792FCF39BE9C6791F70544E105
+:10515000659CEF7DEEAF63BACC43035EAC117889FA
+:10516000E623E0C91A81A73942E2690E499320C1BA
+:105170001DC16791F8F989F89A8B7F50FDDC3D4A93
+:1051800010F96FD1F899A33532FEE668AEAAA0FBFC
+:10519000FCF954DCF9C141C8A76DE9F25EC368FCB3
+:1051A000CD150DCBE1F7CE25BD114E62BEB03BD97A
+:1051B0004F53BCD0DB9E418D769B94671CE76D7985
+:1051C000FD5D5E772D5E5AD5E00B41F5D4DEE5F747
+:1051D000342F6923CF77D259193FB9EEAC95CB293B
+:1051E000E3CCEBEEDAB3A9FCFCA7E2A50278069FBC
+:1051F00023AE97D0C63D7B88F3259C3F5F633FC4B9
+:1052000090C3AD769D396FF942F65F749CF0AE2B7A
+:10521000F47CC1016280296FF902764774DEB2A185
+:10522000C75B5C524F8E51B3DFF2D0BC8B5F55D958
+:105230004FF74C1D6BE1F3E3AFCAFBF1B465679A1E
+:10524000C09F5ABC85E5E0C2F86E7CAF85A6C7ED6D
+:105250008C7EBAD4B44B45FCAF38C6CDF9F8C53511
+:105260006A11F45731B5F344B45BBEB47B17E885DB
+:105270004FEFE9FD5880D6CBA7B7A7A422EEFFD900
+:10528000325B0A49CE73ED3E5D36A60BF2333E5BD0
+:10529000E5981A6C033F9B747D517ED707ACB74EDF
+:1052A0005A5E4F984AEF972DDB9980B4FFD265EF95
+:1052B000E6BBC9A4B8224FDB7805EFAFAEDBE4064E
+:1052C000BEDCEBF83E815D242EF17EF1B2654CF739
+:1052D000058ADCAFBE55097F3982DA9D8859953041
+:1052E0003513B7A10ACED338B3215E3F8F56C379A9
+:1052F000432762C91EA0F64762243E8F6C8FF7F2E7
+:105300009D18DE4017F6DFDACBFD9D524BFD751878
+:10531000CF5529DAAE2B06601CC14D692AB7E3735D
+:10532000EB5A4DCFC4B6E21FE7E6A9EB69D8DB28FC
+:10533000616F235F06F63660D8DB28616FE379E59D
+:105340001AB3FDD6A0EF171AF1E0AEB5CD3ED8BB2B
+:1053500081029155C57A765CC1BF426FBD2AED8549
+:10536000458A774523DB4BF175F03B6BADD2CE0E12
+:105370007C22CF45D19F2CC8A75FA89779B19FFF0A
+:1053800050DC5D8FA3FD62EC0FE5E1DE53B2BD2280
+:10539000F875C459A7883C773B928CB04878943311
+:1053A000DDD47E8C3BD3547F655A1F53FD551E9F21
+:1053B00009BE266BB0A9FD78EF4813FCB34157999D
+:1053C000DA4FF44F34C193C74E33B5BFB6A8D854A3
+:1053D0007FFDD4F9A6FA69DA2D26F8C679B79BDAEB
+:1053E000DF545563AA17A2EA49E0C71F90F7B0D56A
+:1053F000C37F72E0FE17279754FF7BE4318F24515F
+:10540000CFF7AEBC71DBE380F721AF9956DCD0510A
+:1054100096AAB6E2F8B62132AEA80DF5FF7805FBE4
+:10542000B90D7C8F2662B7E0BB94211EDDCF96CFED
+:105430003B598DB855433ADF9710D5FE42ED86C6ED
+:10544000ED3BED2196BBF385C76EB20E461EC4BE82
+:10545000DCEE04EF1DD2749395E4CDD021FB9EEDDC
+:1054600046F0C117FACC60F8F27DA7513FA5FE0BBC
+:10547000593F59B069D230E4DE9B02C47743477488
+:105480005BE995719136CFB71B25F08473E1C013AA
+:10549000CA30F13DCA7DC4F7280F10DF97905C3BFE
+:1054A000487C8FF210F99978FE6FE467A27C9DFC2E
+:1054B0004C946F927F89B281FC4B94EF544FE5F28C
+:1054C000BD6A8DDFFB63F53C2E3FA8AEE2E71F55BA
+:1054D0002FE6F293EA003FBF7C888C23B848EF4068
+:1054E000BF57200F06F902D1F72C57B9F9FE835A9E
+:1054F0005D6F897A3DAF661FF9AFC067A335E94B91
+:1055000067EBFEE285FD7DABF832C26E9B68F50F5E
+:1055100019C2F4EDE4E6FD21FDF90B5ECD3F84E810
+:10552000FB7EE6E49EB92AF45DD5CB8954F7BEA58F
+:10553000EDFB2753747EF10DF58FC17BC39C8779FA
+:105540003FDD934ED6EA108615D05FC991F1CB614D
+:10555000D6865AD4D77E2F3CF09B5F8AFF23EF83F9
+:10556000D792B98CF3C7CA59E9AF0CD7F7EF6BBF25
+:1055700097FBF7C33176AA1FE696F5B53793A6F3E6
+:10558000A13EC4DF1F8ED3CEF27C9B296F67F4D976
+:1055900086515CEFB27B906F3ADC1996DF730A3765
+:1055A000E2CB2FC5EF92FD8F91FD6FF83ECCDF87E8
+:1055B000F7691B8CF1B78E67098FAF41DE4F972DCE
+:1055C000DBD7EAED876BD47F12C65725C7574CED62
+:1055D000E5F859CE0DC73793E06DCBFAD834793E54
+:1055E00079F459BDDE2BE7DBC12A619C29417D4658
+:1055F0003B4DF8A9BF8C0CE145FC6D784A433AB7A6
+:10560000D7F319E2ADF27B895E791F578FBF6A72BB
+:105610003F801080F11B7949C6BAED9C1C4E879DD6
+:10562000D779A19DBF97A16EF7415EE7F8B400E876
+:1056300067755A787EB57E795EFEED173D9D711FC8
+:10564000E944DD5EFF07F45F26E9BF57D21F97BC30
+:1056500065B4C2CA1CFA6F709BF497F8227EC1FC35
+:1056600089FE4C0FD053A7BF62E047A7FF397A2DC0
+:1056700089ACD7F9E37CFA8724BD757E1AEE94795C
+:1056800013680FFA0FB34A7EA88D91F91E2FC51724
+:105690003E8C7BB208374588CF0F33F8A54A9E1F52
+:1056A000FEDF4AFF3CABBC47CE51E6E47BEA2EC6A8
+:1056B0000F339B4521EEE93CEBD35220278ACF7A6A
+:1056C0000E029E2D4616C23C37EA959CB6EBB5BF3E
+:1056D00034DB001BCFB3D06E406BBDD5F94E1CE45C
+:1056E0009EF11DA3DD95E7B5CB71425F2C1A135ACD
+:1056F0000BFD35B6C6CA716BB24C183E44FA4CE687
+:1057000073FA137CA991F99FDE030BF370BFA83CD9
+:10571000BF255CD2AEF6D05FC8D5C21F8A96A23F25
+:10572000A16EB1C2EF38837C5AFA4E618AD93E1F0E
+:105730001BB5BF7E75F6576C8F5F7D917BAE8F0C6E
+:10574000D1F7DD3345E67FF29ED1E621AC672FED40
+:105750009ED12C51CF7C30BA58E673D1FC2D3988BC
+:10576000DBF84515E0425165051F8C157556E95764
+:10577000FA4F54E4B1D7CEF8B94684F9F9785228F3
+:1057800050263F23F601BC3F6EC274DC1F3C2A77D3
+:10579000540F3C8FB83FCF36B43DDF9FF76777C4D7
+:1057A000FD79FB46CBF5B6F05A196FDAE7ECDEA6C9
+:1057B0001DFA2AE9DB1E3D8117C1E5CBA48F7BD002
+:1057C000BC5F217D0CF8EAAC1A81F70A3DE6BC23E8
+:1057D000E3FD6BDCA384B5DD85F5DD35FD9FEB04D2
+:1057E0003CBF96D47B34E8F55AD2C0D188C7BF9667
+:1057F000D4C1224B879DCB7EBB7BB4353E637DB449
+:10580000F657C8FD19F7058F6E2FEF0B8EC6EBD537
+:105810002264C2EF381DBF3F01AFDEB6F09A82C3EB
+:105820008EED81CF77771979538827F758DAC0F052
+:10583000AD36B90ECA778F2F405EF4C2F7657EC7CA
+:10584000510C057A77F1101EFFF0C583853597F767
+:10585000A302C0779953E2F164E0A5FEB8D73CDC1F
+:105860004E1B89FEBF5AABF279FB93CFC4703CEE5E
+:1058700048F0D904E0D3E0E332D5B3D28B75F89A7F
+:105880002AEF59FA617F17DC437A21BE267EBE7A61
+:10589000685BFCEC227EEE773E3F8B0DF21E83327E
+:1058A00067619B7436FCCEA41C3FCB1FB708DF0298
+:1058B000FEAF10D23FAA70BE2EEFA92418E75EA358
+:1058C000EDAAFC586A4FF576A7CC1736E89DE19013
+:1058D000F75866C40937E22042CBBD0CE3FDB4BBE8
+:1058E000BF187821BF764B64DEDAF0705FDE771E7A
+:1058F0007B48E57CF75762E5BDEF8D440F85ECD31F
+:105900002BFB56B9BA111DE7E66B65785FA83FA877
+:10591000E8F7F59E8A68C7F1F35C17FBD93FD15FC2
+:10592000BF75A8EEAFF717FDFFE1EF29B497F70EAB
+:105930002F7C353788712FAC21AD96C2BF8BC1F754
+:10594000C4D5C23FCF6C953BC3452FFEBD8C5129BA
+:1059500036CE33FFDFF67B0A1942E3F5F79FFD5D94
+:1059600085B1F2D179BFAB9091B0E28096D2FABB0B
+:105970001AD1BFAB90A1DF672D3C527F18BFA73073
+:1059800042F8392F7F4C9A59AF8C728F3CE0E6D2A7
+:105990001CEFC9B8483ED7B34375BD7231BA970BF7
+:1059A0009DEEF25C27F840FF7D9420F8D3F87D143B
+:1059B00083EEC6EFA4D4B697BF93F2CFF6BB28D13F
+:1059C000F489FE9D9468FA44FF6ECA702D96F134F6
+:1059D000AACCC57C6DD0692AFD657B00E77295FF76
+:1059E0007E7A1D8DA2D719B17200EE293D552CE5A6
+:1059F000FA85F4FF06AFFF14E4C58F8827E1BC8B5E
+:105A000053C643FCB55611335CE07E42CE97FD454C
+:105A1000ADBC07AAD62AE30101A22BEEC5FB2EF6E8
+:105A2000EFF23E47B28F6C1D1197A9E2F70376A7FC
+:105A3000BBD60B7A27309F2C5E2CCF031FB6D4F138
+:105A4000EF5DCCCCAE52B07F792C535386B547BCBA
+:105A5000B868FB1C8ECB570D847C9FF1074717D489
+:105A6000CFE82AEF8F14D98D0322ED911919322F27
+:105A70002B66982EC7BD320FCB354CFA09F15E3735
+:105A80009F6B28CE167A7EABE832A31FF8F813B6C8
+:105A9000E35B3CD2AE6EB4C97B2C03AFCA7C9EB52F
+:105AA00055EFB0DDBF91EC5A55DA376BEEE3384372
+:105AB00082C03EEEE331CD49187FEF35C2642FF44A
+:105AC000093A4D79C97D37BB4D70BF509AA9FDE5A4
+:105AD0007B3CA67A5F38CB549F7BC86B8207340C23
+:105AE00032B51FF881DF040F6E1C6B6A3FE44891EA
+:105AF000091E3DAC9B8CFB8327693E3316B983F2AC
+:105B00001E7D1927E96A97F654EDEDD29F30F2D742
+:105B1000357D1D44E7AF77B6CAFC757B95D46B9A8B
+:105B20004BFAB7EE64E156F95C4C03C3B81B82F341
+:105B3000C603E63CF34E4EE95F59464BFFC3AEE762
+:105B400099C766C9732F465E39F9157EE0BB876831
+:105B50009CC6BF77A0DF271ACDCF453ADDA3C7DDAE
+:105B6000D52ECFD3D5DE6EE7FD73CD656F5212CE45
+:105B70001FCFED0325FF6F74B67DEFD38C61328E9E
+:105B800012CA2DBA6E18B57B8CD416DB5FE7F5E729
+:105B90006D84BCABFD959DF3C62FD6DF8CCBE57C29
+:105BA000A65B2C332766B33FC8E7008D7E2BF47EBF
+:105BB000278D50DA9CDF8CC466BE774D24DA3DE039
+:105BC0005FCDB59C6177AC4852DBC07BEBB90C99DB
+:105BD000A77FD3CAD07DBD699CD3ED753679E140EE
+:105BE000D0067E18574076A40FF1D782475D448FC8
+:105BF000C7165B390E76DB8B2FCEC0D5F4E3453369
+:105C0000F3031251B09F08FB53CD691DF7B1E13288
+:105C1000EFFB415C2CCDF6CC0F3CAE163D3ED222C4
+:105C200042E7CE4F04DAE037CD7590CF21B8174A5E
+:105C30007EEA1C71CE0AFEE7FFD47909811D52EA83
+:105C4000C75627E439C78BE0CF38A7E2B9C556B4A9
+:105C5000DE85F32262AC128187FF182EE3FC878673
+:105C6000497AA31DE4D185DA91DD9788FD8516E197
+:105C700049745F24AEFE3F31FF0CAB8C337471CAA4
+:105C8000F3229DAD1ACB0B7B967ECFDD79FCAECB9C
+:105C90000D3D4ED6C92AD77D27AF5CD7E7CB85030C
+:105CA000FC7DBB26EF4D8BC62FFF8988AB18E757CD
+:105CB00062474B3962C88573E7507A4A3FD4A6CB16
+:105CC00087600F0BE71DDC1D6F5EC7DFEBF261AD78
+:105CD000A12F02E4C7E79BE484C0BE5EED3295E5E8
+:105CE00004C9C9831A8DB318F7B2B85B7F1FEEE6FB
+:105CF00007A41E1BEE2F7A10FB26B356DBC43ADE38
+:105D00005790F7C3CED5E3E4C581A8FB59747BFC5B
+:105D1000CC4AC58DDF8D98BDC25C3FD7F5E527F035
+:105D20001F6F8EBEA7C6D8AFBB481CE0E830DD4E63
+:105D3000F70AAF9E7FBF04E33B1394F75E9F3BAF30
+:105D4000A4C77F5A82CF4AF84E21227F47C2B00BA8
+:105D50000CD8837DB2887B5808BFB159D0EF4BADCA
+:105D60006DE6371AF83D97E7A1EFD351B96419FBF7
+:105D70003332BF81E401EFCB9DA07AD8812702A7FF
+:105D8000B9FD891D319C5772D2D7D01FFBB7C63ED3
+:105D90005D0F4DEE63B5EC8897F90D2E8B8437CBF4
+:105DA0007BEC17FC35D81F7E6C63E059D33907AD07
+:105DB000D1BCCF175D6A353BD9DFBC224F4B1E8E5D
+:105DC000BC74ABD7E925F81ED73EBEA76B1CF98F74
+:105DD000906BC84B599622C7CFF22B705AE2AF4A4C
+:105DE000E2EF6764E8417EBE2F487A228E29C8AB75
+:105DF000A5B2383C98FBFFA9FB6093CFFAE4FEEF15
+:105E0000D921FCBEB66230C359C1E6911F50BFD73D
+:105E1000692E0FE248D7D6FE624C2C7DBAF15F5D49
+:105E2000CBB8EC6C3E3F6094BEE1528F34DADAAE10
+:105E30005FAFCB9F3F0C17FA7D3592DF17D628BC9A
+:105E4000AFB6103C0EF83E793FA7019FAED3E131CB
+:105E5000125EB44CC2504DB08367E9BF93B6498F10
+:105E6000BF60FE28317FC405B6E8F119CC1F25E6D6
+:105E70008FE790578021AF00435E0186BC420979CD
+:105E800085E75F248DE27D6DECDB8D8E584FD8B7B2
+:105E90001B1DB13EB06F170963DF2EB23DF6ED2238
+:105EA000EBB16F17598F7DBB4818FB7691EDB16F41
+:105EB00017098B4157B5C2906BFE89267832F903DA
+:105EC000A323D633F6ED22BF8F7D3BD3F7B45B4CD3
+:105ED000EFDF28169BDEC7BE5D64FB998B15D3BE32
+:105EE0009E10CDACD767AF69C77C94E12BAA04BFE5
+:105EF000FF39EEEFB7D9BAB17CE038C6C2F258AF7D
+:105F0000A477DD58497F8B3C1FA134F3EF0B9CBE77
+:105F1000D32EE131E6FC6DA3C4BED7689BDCF7420B
+:105F2000897D2F94D8F742897DAFD13DE5BE174AD0
+:105F3000EC7BE139F6BD5062DF0B25F6BD5062DF28
+:105F40000B25F6BD5062DF0BEF61DF0B25F6BDF0D0
+:105F50001CFB5E28B1EF85E787691C2511720CF6E2
+:105F60007A0F939F497C68F233DD2618F67A647BBA
+:105F7000D8EB91F5B0D723EB61AF47C2B0D723DBA5
+:105F8000C35E8F8443C33CBCDE60B747BE07BB3DE6
+:105F900012EE57177819B1B5F16BBF3E80B2315E82
+:105FA000790CE70D43C3A7CCC47E66638CD22589E8
+:105FB00064BAAD66DACCD1B0C3F5FCC7FEA2D90293
+:105FC000F9A3C199CCE373869C57DAEFFB74AE6FEB
+:105FD00030CEC5E10FD1DDB743F0EFCE18FBEDC6F3
+:105FE000FB5E52DBFC7B517AFB56B8ED76D1FD1B94
+:105FF000ED38B72A621C38D18CBC19DF9DAE1CF875
+:10600000219B2C0AE7996C5A22F3A2A3F9EA0B5DB3
+:106010003E6DB26CDF877330CDC58A17E73E7AD408
+:10602000697CCEACDF7461517DADF3E9FD7802E7A8
+:10603000D5BEA1CB3D63FC467C94E4059F1F1CDAD2
+:10604000DC302A91DA6B8191FC3B38E3ECD26E2094
+:106050003FF40AF8937D038A7F7D049FFF69B8D4DB
+:106060006F5A408EE3C9C727C8F762E57B4F3E9E53
+:10607000C0FD4F58AA709ED9D02DC28F73CA8DFA19
+:10608000F8FB6E09ABE8AF78A9ECCFF86EF1DA2E29
+:10609000769CE736F0552C1A47E33E6991A7E04E0F
+:1060A00059D1CBAAB15DDA61BADB023BE852CF41EC
+:1060B0000DCB4B1A833C44512FF8DED0F1796F9B06
+:1060C000E6CBE8CAC7EFA00AF60DB5C02D16F43B23
+:1060D0008110D00EF16482311F4D13559984DFEB8E
+:1060E000A61633BEB3A60B05F8EE337D9D2585DEDF
+:1060F000EBABBD6481BDD6AFAE914B631EDEA14953
+:106100002AE07136F7188C7FDC1885E547741E0F7E
+:10611000EC038697DA589F1BF6C3C2F873793E7F6B
+:10612000429ECFE94336CEF339BDF40CD717EF8C3E
+:10613000E1BC1E6D8DC272CDB01B8CBC9DB25BDE0E
+:10614000CF077E8E6506372575673D9F3802F93487
+:10615000DDB627E008CE89A53BAFC3D1BDD34B77D1
+:10616000CADFABD5F7778CDF3D15D97ECE0733EC90
+:1061700040A1D6DB23F7718CDF4F23F9C9ED4EEF39
+:10618000B1BBF9F7EBF4DF3B35E23EC56FE41E042B
+:106190005E8B1F95BF7F366BC5AAC2A904CFF13BAA
+:1061A000C3F85DACE87CACF95176E0C57EEFB4CFC6
+:1061B000083DFED36AFF31BF9C795DDA7FC56FEC85
+:1061C000BF56DA2B36CEFB9F5E23E37562BBE0FB46
+:1061D0008FA6D78CB2E01EE9E93BFD5EC5D36A0706
+:1061E000BEA5DB2D93CE66307EDFD5ED946B917F1F
+:1061F0004AF81DD718A3E7ABA57379FD59998F3AD3
+:10620000C925D77BE37382EDE9968043E611D60B6F
+:106210003DBFD5CC773E41FC41F4B9CCAFEC47DA79
+:10622000F278D83DF4BDA9B083DA818F8B97215FD6
+:1062300096DE66BB339A8F2759C353F0FD495E1B28
+:10624000F3D73FE263DCCB714E2E89AA9771CE5F04
+:106250006C90BFE3305593FCDD57E7EF19717AFC82
+:10626000C925E34BE7E2011824626681AD33912F23
+:106270003C03C90B1D795A7EE4EBC567CBFAD97F85
+:10628000D83A73299C990BC425D43BEC7C7FB5E6A6
+:1062900072F2EFD05C284E80F800E4E34DB7FAECE0
+:1062A000B322E463C1C882D5FE0111E71DEF9179E5
+:1062B000500BEFE9D9A1ADF3B646399BF08BF53120
+:1062C00023B1F1369C37AF1921FCA307C9DF99E44C
+:1062D00079E1C44D167E6F52C25B47BCFFE715D90A
+:1062E0008C0F867F35E28599C8872977361682DD3F
+:1062F0002AB3ABC622EFBA550E69FE8C4CC8215F9B
+:1063000018BF1B76A1B8C3D611920ED1F187D9D987
+:10631000523E0BFDBEF04FEFD9BD0DF2DC18FFA7CA
+:1063200017F87D8C8D232CFFADE73CA2CF777CD076
+:10633000477B6804E21A167F13F2E83BAA757AFEDF
+:10634000ACBCD7C3A06F4CDD771CEF28D1EFC327BF
+:1063500079C2FEE42CBFD35B0339922596E3BCD00F
+:106360000C5534F3BEF1797497787C7CDA5FE723BF
+:106370001FF7F15FC5CAF33A3AFEA6DB1B5E7666ED
+:10638000B6E2EFE3C5FF6293F22BDC13FB723754E6
+:10639000C5707E5BC1C8A22D186F5CB697EFC1585F
+:1063A000ED97FCE4EC56F47BC8C1F2952F3D86FBDB
+:1063B000122AEB33F977658AF7F896E39C63C148B4
+:1063C0006D07DE2B76B9F9DE908AA549AC9F66741D
+:1063D000D0CFBF8B66DE8733F0FE861E9FBA7FA4C8
+:1063E000FCFE29DDCF80209C686A77A1389DCCBF58
+:1063F000417E0EE28F9A6B17C709DC77C87B2AECC7
+:10640000E23D197F4C6B3B6E90A1C71BD3BD323E62
+:1064100064E0EFDEAC592CE76C463CF71CFECCE7A1
+:10642000318DD2ED97F6C2AC5B15F6574B56AB7C6F
+:10643000AE7C8C3A8EEF7159B84AF1F0FA7AA03BF3
+:10644000E77B2FBC87AC310FCE97790A3BE4E1BEE6
+:1064500075C50DBB643A681111DF29593398D75BB4
+:106460004990CA36EE3535CA1B57EDEFFC9C0764E0
+:10647000F4F3FE6589DB6F4F8E58EFB3EB14D3FD59
+:106480000A062CF02316ED717F3D29481AC7F41E29
+:106490001E05FB8A6EBFC4C34DB766DAF17B24D3F9
+:1064A000E9CB969C0BF7FFFFBBFC7FC4BFEF53000B
+:1064B000800000001F8B080000000000000BED7D35
+:1064C0000B7854E5B5E8BF67CF2BC94CD879910458
+:1064D00048D80904C2439C109EF5C1CE0B2610601B
+:1064E00092808227840904091EF446D4126C940910
+:1064F00099C41051138D0629EA80C0A16A25564F10
+:106500008516DB017C8B8A20D6B636191E8A6D7DF6
+:10651000A470A8F67C54EF5AEBDF3B99D99904D0CC
+:10652000F6DCDEFBDDF8E1CEBFFFF7FAD77BAD7F0F
+:10653000A7289DBDCA2631D6DD2A48DBD318AB94E7
+:1065400014F3441B63DFE2CF0CC696B5088A6F7C58
+:106550006FB9289D2D75413952B1333699B10A4929
+:106560003627A7E15332C7C2FB65B71F30B178C6E3
+:10657000968F644CC882F6B10EB30DC75F05E30B6E
+:106580008CDD20F90BB0FE86F132AB8B81F6DE2C70
+:106590003383F9DC9BF83CEEA618F31550AE304A75
+:1065A000E6142897453286ED617D3EEC5FE957CCD5
+:1065B000B1361C972D2DB1F1F5C606ADAF425D6F1A
+:1065C000654B8C7945C8FB56930CE5C58C291D415C
+:1065D000FBD39E331481F6B3CC5B9CDA0EEBADF4A7
+:1065E000D8259CB7D2A8981DB82E1C17FA2D6E6B13
+:1065F00037A505F5BF423150BF198A4CCFA2747F31
+:106600008680FBBD35C281EB5D2CB598109E451A86
+:106610009C1FE6705821F93370FC15560E076DBCAF
+:10662000CA363E4FDFF5717857B6559865A8BFD189
+:10663000E84A6D87FE37C23A3DF05CBCF94086807F
+:10664000CFEA088700E7C12477AACBDEDBFF938778
+:10665000AF4FA5FDC3FA11DE76873C3309D6B3BC34
+:10666000051623D393E62DCF66D51D4170BB5E3151
+:106670003296804F033D594BBB621D0CF060FC67A6
+:10668000B8F9480EEEA37E0C631B601F6EDBCF7360
+:10669000709FD29D8C89D361BD9BDEA3FAE5494CE6
+:1066A00012A0DECC5E10B0DE5C097DA0CC3C054AB9
+:1066B00020938FF56D3A63293832B4B701FE789292
+:1066C000195B3755A67917B3C0623602C6D9540C88
+:1066D00073C03A13F93ACB07B1EA9F8581579BBA49
+:1066E000DE1BD4F32E33B097596C6FFDDDEA79973A
+:1066F000213E07F5C7F170DCD55A7DAE3FE3D6F1F8
+:10670000BDEDB579CB62793FA407C4C3D52A1E601D
+:10671000FB35D49E970B44DB8606D8CF9AFB449F6B
+:1067200045C0E7930D83B1FC9CE040B8FF79CD8B69
+:10673000EF5C07CF3F3DB2AD1CF7A7AD63C5D7599E
+:106740004C8E83F3FDFA2A7A56FAA73339BBEF3E13
+:106750000F4F75FF48991C843F0FFD74941BE6FF93
+:10676000F3B36F65209C3F021C1001CEFFF6D327C8
+:106770004D2CBD77FDCB9ADE3355D882E12510BC78
+:106780009A338FD2F92DCFE4FD967BFF5281E7C17A
+:106790006C663923ADEFF957789FE3ED6B1CD4DEBF
+:1067A0006DFB809FFF102689C9173F6FED7CF5E7D1
+:1067B000FEB8C9E54F12F07C5A42E85FBFFFC7D46C
+:1067C00075FB54FABB41C5E31BAA5AA9DFB2A68ADE
+:1067D000274558F7628D7E2B43DF6BE773769389ED
+:1067E000CEE7ECA68CC6242C77F0F3F977B163C220
+:1067F0005A68F7E7D53B6F494EC755FB525D57F0D6
+:10680000F361D9FC7CF0B912CE87C5853D9F3DC1AF
+:10681000E7B3F2097E3ECB9F7DFB0FBF9009FFF8E7
+:10682000FEEEB3F890FF2EEB78EEF80FE0FDE2A657
+:1068300056531AB4FBB59246FBD2FA2FAFCE9258FC
+:1068400034ECAF699B09F9C0AF15392C9E6B7065AC
+:1068500046CE671E37C1D9C6503D13627BDB2F661B
+:106860004A22F211E619C676C6F75DFF9F543A2A0E
+:106870004A779813917F3544B1ED12AEA3E27E368C
+:10688000A16F7BED792A82D3C5329807E9F3548E44
+:106890002315E9A2CC6008A137ED7942A5AFA1513B
+:1068A0001D8B71BD43E398540F20FE71A4926B8041
+:1068B000797FFC03AB54EFC0FE6E19EB2D562679A1
+:1068C00000E4DB0DF244C24FC6AAEF494658062643
+:1068D00023DF1BB93AF0175C1FA253C444FEB4C3B4
+:1068E000BE2D391C4FA0CC06F3F77E7CA6183B8842
+:1068F0004F45D670FC33B3F7A96C06BE8578ABF56F
+:106900001BCA8E08F83E19D682F337672EA3F333DD
+:106910008DE4F4D2DFFEBEBDC4FD9D4A73FB484E3C
+:106920004430697B0CED6F0D967BF697C91403F428
+:106930002FFFD115DB9A61C85375CA4133D49F5AD2
+:1069400067A3FEFFA8FDEAF7B9B8B222649F3D74C1
+:10695000D3027C2D0D9FD9A9B8CEB3569808EA4F23
+:10696000DD1A6140F89F4AE3FA0263017B099CCB80
+:10697000AEF5F0AB85B1DDEBADF47C6A3D20D368BC
+:10698000C69E599F44E567D7CBF4EC589F49EFD397
+:106990007338FE95452AD12897BBEBECD2768487D5
+:1069A0009FD34D67CD088203E8099C1FAB7A41A7AE
+:1069B00014B0C706F169901FF7A1BC633523D84E08
+:1069C00098A2B3E594DD301EF192AF4F6B7FBBA967
+:1069D00085ADC3768F0ABE9D306ED4EDEF1524A22F
+:1069E0009C6E4BCB12A0DF929A73C40F97D806CB44
+:1069F0000CE5B8CDDD3815EB37A7491BA05B545B20
+:106A000056670DF45FE11DEDC0F6B70B7223CD5B49
+:106A10002738705EF851AC53800FE06F505E697B91
+:106A200075A4CA2F0DC82F97DFBFAE3119CA270C26
+:106A3000AC5B04D014198A6762B9684B8CA31EE55D
+:106A40006D3DDF0FDB0A7CD4DACB470BA7B9AECEA6
+:106A50008173661700DF60FCB1B03626E27E3A141F
+:106A60005C3F03BD6327C3F5BACCD8FF972ABFECC0
+:106A70006C3B6197D5F32946BA71779FB807CFD59C
+:106A8000667034CB28DFE5776584FB1B22DB2E2381
+:106A9000FEF0FA35765E0FCF0D0D50BF669BE843D2
+:106AA000781488658303A87F6D16892FAED8563A6F
+:106AB00018F58D155046F9B505A7027C6A6CCBE335
+:106AC000ED5A0B1EF1003F4D15980BF9D16963A0EB
+:106AD00018E1F1E9B6C4D83AD4F76EAE1FC5A0BE2E
+:106AE00072DB3DA9F8FC745BC422E4E3F952717EC9
+:106AF0000CEA3F5B63B244B997CEAA72389DDD744D
+:106B0000735E22CABBD5DF1C7A5C02B9BA0270542C
+:106B10008271CF7744F93CD064F5FABDA922A096E2
+:106B200025DEBD3C07F0EBDF0DFBAF9B8E7258F00E
+:106B3000ED4AA6F672A2148E8E357D0AF058063CF8
+:106B4000BDF9EE0F699CCF0D87E72D86FEAB6F7EFA
+:106B50003E1AC7F9F7878F4D91E0FD0F26B9FF1751
+:106B60008EFF2761DB2E0940C2366F9B80F2A33A6D
+:106B70008771BE1AEBBA6E3187AF63BBDCFF7C5501
+:106B80007B0582A7565EE21B6466A897FA9959C2F4
+:106B9000A7C4480FFE54643528DF35BD447B5FAF82
+:106BA000C2E5D3412DA978FEAB76B5A7A2FCF8A328
+:106BB0009D97DD3B5E5B7127ACC3DD669018E09D61
+:106BC000DBC848EF5DEEE1FA34AB026692DC3BFFD6
+:106BD0007D3951B4FE559BB343E41EC8479AE78FF5
+:106BE00046E6C4750CAFEFCE42FDE9F746FF0A3C1E
+:106BF000D7DF837EEA49C373E2F8F7FB167126BE3E
+:106C0000F7DC2EB00C01CBCFDB47DA480F33105F37
+:106C1000FFA5C9B713DADB2775F891EFDDFC42CC8D
+:106C200044046381383E11F167CD3ED3CCA15C9F13
+:106C30009270F6D546BF39DCB9DDA4EA513DE517BF
+:106C40009E3323DEAF7E06F401A4CF17041FEA377C
+:106C5000AB3B9E7B75088C77CBDE8A6C9C476B7F49
+:106C6000CB0B1C0E112C602E0DD2AB2B32631B876D
+:106C7000028F7CF6C0474B1F862D55E039FD80B151
+:106C80007D333E70D78DC4A744FB64C66ED2C74126
+:106C9000BF32A3FCBFD9CBC7BB39F368633AEDABB6
+:106CA000388E059DFF9E1C13F5D3FAC3BEA95FBDA8
+:106CB000F5EE2702B05EA5DEC822AE85B2917DB4A6
+:106CC0000BE1C7A2A59DB80F233BFD2A3CD78A83C1
+:106CD00058333CB756AFF90F6A5F67914478D6DFF7
+:106CE0005CBB2700F3C9227331E8EFC9ADA6F13CC4
+:106CF000662E7FDAA39E7DF44628D72CB03900BDDE
+:106D0000A11C4DF0D9FF4303F1F964D67DC800CF33
+:106D10004406540400FA539AFB30E237FDC0B86BC6
+:106D20006F937DC88F81830B88E75FBE74261BD766
+:106D30007DEDF0C039C42B53DD19773ED0FFFB3910
+:106D400012D74FC607B2B15DC24195AF198F907C83
+:106D50003425C9B1A8AFF8712C5CDFDF0C8407FBC8
+:106D600005FF9338AF06A7885CAEFF19B2DC7F4001
+:106D7000FEA708A63BFCD07EBE10EDC0FD1E891507
+:106D80003326023D7F69FA280DC7F500DA8A437B76
+:106D9000F5D85C75E9E621D336235C7200A0EC6A75
+:106DA000B065C6C7322394EF65866E0BAC23B7FB84
+:106DB00077DBEAA02C3D38888920AAEA2352592E95
+:106DC0008C2F1C848DC27E0E8E3FB81CD7796FB776
+:106DD00095219C983554CF351B92FD3F427CAE8E59
+:106DE00076B02494431D59C88FD82D364733B45FED
+:106DF000722190F1BF502EFDED30E9E963D2DD5FE5
+:106E0000E17E8688CA0937D4DF2BF9473C80E3D777
+:106E10004439EAB81C61C1EBDFBFEE6FD171D0EF2E
+:106E2000CBEE51C63DD0EE4BC5EA000D9675DE396E
+:106E3000EEE5ABA07CB52A4FF4EBFA324936A2DD81
+:106E4000F165B7D58F7AC89736834F0090E6EE3F4D
+:106E5000F4A100F23BD76AF38BD1D8CFF459B0BC80
+:106E6000614752623E194722867D0BF01CACCAA5D1
+:106E70006B0785DA8F4372B91D342497F31FA3EC97
+:106E800020389FF5185933E2218332CE6BB44ACDB6
+:106E9000B0BE5FD9762D01CA6767BF4E1F8472E30B
+:106EA000ECFE1183D8F8FEF9E231D427404F583A6E
+:106EB0005149CB9DDC2B5F17AA708968B9DE84F03D
+:106EC000A8077834033C16DA0C7E0BEC8B2D088572
+:106ED00003ABE92E47BC61866807D20D9E2F9EBF8B
+:106EE0002C18BAD9557DCF7BC605C9FF23282F8121
+:106EF000F344B8969FFDE48A07189DDB15B9097421
+:106F00008E0D57B2DEF3FB573B2F667434E139AC7C
+:106F100015ED2D780EF546AEEF7900B776C650B771
+:106F20005D782E6BEB47D2390DAE073E81764A9DD8
+:106F3000916D8F47BE7294DAEF54F54196594D7CAE
+:106F4000A6BCDE2221FCBE8A8CA6FE0CCED5342443
+:106F50001C9FE17CA5A692115F593ABE5AC0734F9F
+:106F6000C219603F9D86801DF71988002D129EEB87
+:106F700072D389CE87224718C1CF19FB3FB6CEBE48
+:106F80001DF98D681DFAD8691045ACA93B7A2CAC67
+:106F9000AB4D601DB42F93CA3F56D9489F6B8BF100
+:106FA000117F6B5B38CC817BFD92A9F55591C45F55
+:106FB000AE3218A8DCBD7830D9636D31C05A71BCCF
+:106FC000C563496FF8F93722B7D73218AFCF62A33C
+:106FD00036637D71268DF74B8D5FDD67A7F1DA8A09
+:106FE00095E448AA1F6CC0FE4BD3DCB7217E0C1180
+:106FF000793B503CA8DD962D4A329EE7961233B578
+:107000007B44702D5E81E35C6123BD31B038F2D9E1
+:107010005DFC38FDE85FEAACE1FBD6E860DD54CE0C
+:107020004F877B4E3C8AFCC3930B27624379F1C5A3
+:1070300012C46B458C76000AF739E7AF7AF09C757D
+:107040000370597C6427D9EB72064360C3F9492C5D
+:1070500017F1E410C013DA7B4C70CEF1FC9C37C4FE
+:10706000E339CFDB167CCE309E672DBC17D6443B70
+:10707000846974CE99387E0D8B74A07DDD737EBFDC
+:10708000F265E1533438922C008BBDE9EE8755FA56
+:1070900025F83EF607D81FC0A5DC1298DC82FAB9A5
+:1070A00081557584E1034FE472FB4062DD2694AFA5
+:1070B0004B35FCAFD5E17F6058CC27512AFE43BF4A
+:1070C00017135DDBF01C3E178E4DC19787FF2E2EE8
+:1070D0000A37FE4F54F9F266BC6B37B61F693C386D
+:1070E000EC36D437D65948FF65170E0DC379D7A6AD
+:1070F000B99EC6FA8891DD66F44F7526779B707F3E
+:107100009D8BFF94827AD6D29AD7883E2F757D1BAD
+:10711000A22698506EC638B34C01E89FE8CC7A0599
+:10712000CFE5E85C8B6C09E3073930776A0AEA43FC
+:10713000C70AA7A620BF3C9602244FF2D461473E5F
+:107140006ADA7B851DD779CC994D6599C96AB9747E
+:1071500040FEFA67E0AF7E5004FE08F61A3ECF808C
+:10716000BDE6077EFB31D86BF83C05F61ABE3F0141
+:10717000F61A3EBBD63BE8FD31E788BD8817E75BD2
+:10718000B81F65B9D111562F5BFD8CC8FC1A7F83DF
+:107190007F37ED880A29576D8D0B29DFD8061864D3
+:1071A000ED2D576E1A1152D6F4CF65DE7121EFDD49
+:1071B000B5D921E5FF67E0DBC4E18BFEF27F25F85E
+:1071C000E2CF269077A5F80BE0F7DB9367111F3D20
+:1071D00026B0EA3878C6489CFF195D02F9DDF0A7B1
+:1071E00005E47609FE027463B4C90D58EF85F60F05
+:1071F000425BB47DD1FE60CC61AA80F70B9D111279
+:10720000CAF3EB5835D1D922D642CF1B58073DCB14
+:10721000D8117A96334E875F5604A6E0F3837877C9
+:107220005A1EAC7FB5D5FD443CDA6D29EED171C84C
+:107230008F6CB16497F6774EA8613355CFB54D5139
+:10724000F7053F0B70EDD0EF68D4843BEE907BE701
+:10725000D1C687F9AECC433E63E2F3BC3D796A0AFE
+:10726000F207E64A08B1A7FA9BAF559593154E0E63
+:1072700027F4D962F9F442C1B701CA075A2D66F45E
+:107280002F9CDE6852F5F5BBC9CE3D719CFB654E67
+:1072900037CC4A45FCAB6B1D9D8A787EDA2437D407
+:1072A00000FC4F4F07FEED203F8E03E5C349A79D2D
+:1072B000FA83A488CE82735BAEEEEFA4EC30AF838A
+:1072C000F60B9345E681F66E4F5A34AE5FDBB77E20
+:1072D000DDCB365942F060FEB4D0F24266EEC5B75F
+:1072E000343C6F736F3DEA4962D920F7007677CD61
+:1072F00047ABDE7D39085F6FC8B3C723DF6453D95E
+:10730000D46FC5DEFEFDC1F7ABF555EFBE6CEA8567
+:10731000AF865793F25CCBF19CE0B519E916E062B9
+:1073200040797C6C2F87636BD4B5F75D0570287945
+:107330005F641CCEE59EDF233EEFE37E7DFD3C01D6
+:10734000A4EBD148AF9CAE2BBCEF91FDB6B4B6D840
+:1073500084EB2BB175A7A0DFE9C05DA353F05C8E71
+:10736000CE1D9D827CE350E1E8C76E8771BB8A44E5
+:107370008705F0E940D1B9FBB07CAC569470DEAE25
+:10738000BDE754FED2FDF65458DF174E13C9A1AE27
+:10739000BDFF1C3E53B20FF80CCC7FDEC7F9CC4AC0
+:1073A000A38B35C2BC2B012E68C7FFB3F9CDC5F83E
+:1073B000CC5193AB2001E1552738D0FF56576821B7
+:1073C000FDE128D08785E353C3EDC827A781FD2BB6
+:1073D00021BEB926A34D796CEF88048417F32847A2
+:1073E00033A7F4E2FBF2DA9545E85F679B4C27513F
+:1073F000EF466708CAE712663C1908C253F70BA6A6
+:10740000DE32E1B5F1642008AFF578BA4787A7E727
+:10741000D98554733AAF3F32B897EFE14F307FB917
+:1074200045F437B2B45EBCFD6BE17BE5A824005F98
+:10743000F905E2EB0F27A6BD141082F8CA25F2B1B8
+:10744000D6A86F48EEB5477D4372EF7821977B074A
+:107450000AAF3FF83BC4FBBB38DE1F5B3895F0F248
+:107460009809E419C0EB686D7634964F6D2A253A79
+:10747000D3E8473F4F978AFF5ABBA5C66E93230CAC
+:107480007EBA6BC590F3CC7861C920F407F4B77E5F
+:107490006D5CAD9D36EE525D5C573FEE27795C4FDB
+:1074A000CCD85136E0F86000F6F6437EC2227BF17C
+:1074B00055443DE07AE601F87439397CBA8AAE2742
+:1074C0007A3CEED4E8D2CD301E7B7481E843FDB522
+:1074D000CB798EE8F43CD0298DD1CFBC9FAAF4F9AA
+:1074E000894A9FA755FAD4EAC59D0F5F77038E5B43
+:1074F0002B129F3EBA203B01E7FBE38E0C9A17D676
+:10750000034605E8212FFFBD024C34E40F76E45F0B
+:10751000C7010E6827942E2C257BBAD4E44808A70F
+:1075200027E8F7AD1FEFC05C8B81F1F188DF95DCB8
+:1075300055CA1A912F001C103F8F637BA82FD9C901
+:10754000FDC087B07D7C309C4693BE727CB7E04026
+:10755000D161DAFB773B9EC32A5F28BF58B9392A2D
+:10756000E4DC56B4C485944B0AF93E8ED78EA0FD58
+:107570005FEEF969FD2FF5FC6F52FBE39ABF253DE5
+:107580002536643C0452E87CE9BAFAB1BAFA89219A
+:10759000E58BE1E309152F34397222425E122EBECB
+:1075A000D435CF52159CA7313B9FFB5B66E773FF39
+:1075B000CBE5CAD582FCF072B5BFFE1A7F1A95E7FB
+:1075C0002ACA4739EA2F35E1BE2E951F05C9E105C4
+:1075D000D43F2098B17FAB2A67AB3A38DEB547DDA0
+:1075E000FF2AE2D5E7AA9E0E7849FCFE0B95DF7FC5
+:1075F000F19F6AF9A702E1E5A17D6BA3516F3FB34B
+:10760000777434DA61273BEAA391EFCBCC13FD0307
+:10761000C0C7CF5C203F61BA4F3B06969F7F54F9AD
+:10762000CE193C07929B129DC729557E9E40F94971
+:10763000F23E939E47517E42FD82E7543D7DB74026
+:10764000F4BFCAD812DE3FBD23945F556D8DD2C9F9
+:10765000C950B959B96968487999774448D95D1BC7
+:107660002A370BC432E2EB677C1C8EA5CEEC90F679
+:107670006764395A22F870387C6192A311CF4EFAB0
+:10768000E2A283E945E3BF477570388D7040FCF492
+:10769000960E8827A7D4FE5A19EC4213CE5B6A7562
+:1076A000BC128F7E844D8203E3540C78CE3438C7ED
+:1076B000230BB29E6C0ED233A40291F0F984F750E2
+:1076C0007932F21F30C0D0CFFB5AEDA154F4AF563F
+:1076D0003C13457A937EDECAA2503EF3594371EEC5
+:1076E000EFA15FE9FBA2CF8AF0288A21FEB5E0393D
+:1076F000D12742B9AB362F3A781F67543AD4E4CE3B
+:107700004A6375D873ACDA1A7A8EA5457534CEB152
+:1077100087850E61103C0F4C0749DAB75FA991EFDE
+:107720007FE53322F977577AFFF236C61557821E66
+:10773000886AC26B4DF5F310AF4FB84C06E2A71D37
+:1077400071F3103E9E05A22303DA1F6E1A41787E64
+:10775000B2296F30CEF772BE48747566AFC5205C33
+:10776000094F9789F9C95EF5D3797EE62D25B97160
+:1077700006E1827A905122BA78379FFB914EC03849
+:10778000586F003A417DB8CB273A7D61E8E3DD7C54
+:107790007E1EA72E3C40F8F3AAEF5034EA15273A94
+:1077A000F8F8A76AA5688C4FBDE5CDB6D3FA8A6014
+:1077B0005CD47BF75D4F72F28C97E323AE93ECC3FE
+:1077C000262E3F8E7997DF3F1DE0F1F92691F4CE0A
+:1077D000CF9B4AE74DC7F3DE64A2725EF1428A6F27
+:1077E0001CF371F972DC77AA1CCFEF8C174E1FCAFD
+:1077F00075FBA6BE3D291ECFD944F850F94CE8B917
+:107800002CDC144A5FF0139D057A5725FE26E3FF12
+:10781000949968272D4B02F909947BA2A8D484FE81
+:10782000C9124FA83CB2B06213E21DEA97D86ED9D4
+:1078300063A593FD487F1E81E4E5D217009F603D5C
+:10784000A61D5793BCAB68B184CC5B521B6A1F2D3D
+:10785000D3D9437A7BE9B2E585A9BA3C9CBC1854DC
+:10786000A0CA0526CD44B89F04C3BA390BE0F982FB
+:10787000A860F9BC3782F867C5D2B3D7A87AE9B552
+:107880008807CCE161D3343B3D88CE9679459D9EF7
+:107890001E0A5FD09F3F41FDB8294E95A39E52F22C
+:1078A000D78DCA53620A701D976A7F5FB27E5BAE46
+:1078B000EAB7E5A4DF1E5B08F202F673149B04F539
+:1078C0003FB0F07AF2EB1C9F7B3DE9B9C77BFC3AF5
+:1078D0002ED5AF730D9DDBF122C067921B0EAD3C20
+:1078E000A01EA1F18B8FD57338A5F2C9132A9FEC86
+:1078F00052EDAD46555E78557971BC48B5B7E21981
+:10790000C90BA3516197C2676E6C8BD2C987389D32
+:107910001D3554773EA1F262B7CB3DB300E0664916
+:107920001A1BF2DE244D0C2967ECD84FFEE3F3322C
+:10793000CF27BA077102E3250B797E16B37690FF45
+:1079400078A143A6FAA1182784F66852611E898699
+:107950009FDA7B299EBFD7CAB1B0EB3A6C97D6416C
+:10796000E5FA858C611ECC486D1C00471DE8094373
+:10797000D18F0DF324818186ED357C1FB6A095DA79
+:10798000E5563149807655056984E7494C21FE3238
+:1079900078355330DF85F99EA7764FDE0DFB00BCAE
+:1079A0000FD4CF20BBBCD41ACDE3DD201F07C6B354
+:1079B0003A4E3FCE38D25B8619396AF68BB76ABB2E
+:1079C0008BE16D901E7407D10533903FA2356A821A
+:1079D00009F1B4C4E622BF01E0F5923BD05FF99211
+:1079E00099FB091672FFE4D1C2A98FA1BD3B618F3B
+:1079F0008D7CC94757003E137FEFE676426DA9079D
+:107A0000E5DE074E2EE7C6EDF9CC80F96E5D7B9979
+:107A100003CB876A9F3FFB26D2CB0281EC8C63B5F8
+:107A2000799C2F33E6C2FCCD63CEBC0D549E0686F6
+:107A30007116D283B2C188EB00B83653FDF2FB2633
+:107A4000A3BE735824FC4D52F38C243CD7E4DE7261
+:107A5000BCA296D95E2A2715F1FCC05FA8FA41871F
+:107A60007A9E3F51EDA05D2ADDB4A974F3A04A3798
+:107A70001BF5FED0AD9C6E46191DF745417994C7A4
+:107A80004E72E6DDA253B46EA07F09E3B969856248
+:107A9000F32480DB384B80F8742988BD0DB09F9C9F
+:107AA000A23ACA5F2C75338A57942CA8A3F50530E7
+:107AB000B67415EA4D7582A8D6237F1C17E7A7F682
+:107AC00025562661FF52E77307300F77A11B40034D
+:107AD000E5FC057502C1A702C683F6076A1FA2F17D
+:107AE0008E57F1751CB5F3FEC72A98E481720673B0
+:107AF0001EBC9DAFD385F1D0E3B5CF1F20782FE01A
+:107B0000F0BEEA5343083D66F92343E87AEC8ED889
+:107B100090FAD19B878494135CE921EDE39CA1F456
+:107B20001E39726248FD3167A901E5ECF9055A7EFC
+:107B30000FF78B69765DCE1E9B01E171DD5C51F321
+:107B4000E31AD860B4BA18F97D9B543D91B58C60A6
+:107B500098BFF1E49D06CA0FD8B8A0DE8A790FE776
+:107B60003B8C745E302EF191E3FB8D34AE35CD2B22
+:107B7000A01FF35E80B318A4FF3569F24DF5ABE3A7
+:107B80007A8C41EB899519668CF5B46F53F1E92134
+:107B9000751DC0B7734C38AF8BE3495C113398A0A7
+:107BA0007FC2022EA7F574D9A1F6FF89DA7F978AE2
+:107BB0008F5DCE273744225C1631D2470AC4D51BCD
+:107BC00022701D458CE8B1C37F3032587FFC457F61
+:107BD000E32CC82EA0713C9C8F8E9D2FD447E0B91A
+:107BE0006E0DFCE91D78FEF2F3C60DD1B0DEA704E0
+:107BF000D68114A5F14F4DFFBEEA8B26AA1F3B117B
+:107C00004C34A8FFE517CDBCFD1426A3BFEB17AA83
+:107C1000DC6952E92763C778F22F9EDF6C26BB67C9
+:107C2000D7BC95DBDB60BDA3E7DCF5D40B882FF375
+:107C3000EEFADD0B72AF9E5F3A2FB913F3F747AD43
+:107C4000B733E40FDABC193B3ECBA5754B468678BB
+:107C5000FAF4CE9F2FC3F17EB22BD2A0C0F84F6FA3
+:107C600037127F1973EF63DB37B3BEFE985267A8F4
+:107C70009DFF938DED4FEDC5F735CF3F713A284FFE
+:107C8000E7D8DC7B52D06F7A747D555B7E46FFFC73
+:107C9000B3D4CCDC18BF73FEF2B39FBD05F3FFC6AF
+:107CA0003D6662B01D306A26F7FF1C5D5FD3960FFC
+:107CB00076EA5891E72930A36703C263EC8B8365AA
+:107CC000D4DF80148C6E80A57376844181FDFDC65F
+:107CD00067DC467C60F6C60C3CCFDCA78B0E7E8A48
+:107CE000E77C5CC5F77EF491A3EA39F5944D32C187
+:107CF000DDF39295DB378A9C42F6B1434E2909D2D7
+:107D0000E78EDEA5C5971C7F403E5E521645716525
+:107D10002DEE223AFFD2807C7EE9B4EAC912AD3F53
+:107D2000348E3F04E1978D715E1EAFF7788C8CF234
+:107D300082606B48276BC5B1946FF2E1AA1F52BCF9
+:107D4000DE53679132E2296EB007CB35C0772C93B2
+:107D5000288EEB43A1BD7826F7239C5B54FF9859EE
+:107D6000EE1FFEDE8B9C8F493D1FFDFBC533B91E08
+:107D70005A8FE79211722E07DD93C29C4BB495F097
+:107D80004B3B1731BA89CE85596D9998F791C851F7
+:107D90000AF7F336CAA1CEE3DC5FF69BB2DBEAD684
+:107DA00042F9EC85410CE9428BAB9427F1FC033A94
+:107DB00012E05B26B57FA2AA77231F43BDBB5C8D73
+:107DC000BB742E611477D1C63B5F3348E2E3DD42DA
+:107DD0007A737935D03FCA92A85F917ED13082E71D
+:107DE0004794DBBA9750BEAA607060DC3C51A7D7BD
+:107DF0007B5835AD37F17D91FCF986A84DD43F1104
+:107E0000C02366612B330181DAA36007A315F34910
+:107E100086E00B3948CF52F375136B5EE4FA511EBE
+:107E2000F44C0E994FF896D65FFFB1887CA0C6221D
+:107E300023DFC3DC2CE4DB04BF34C4A376EA2FDDEC
+:107E4000C424BCC7C11426C74FE17E309C4FBF7EFF
+:107E5000188FEB85A09FE17E855A3EFFD639FC1E28
+:107E600008DBCFE460BB8505AF67444859F59385CF
+:107E7000964D49E61039F59B0BA583AA07F0D7E884
+:107E8000FB1B64D7C07EDFAA20BB2BBDB7BD9627E6
+:107E9000A6C179488DE58410DD7FBFDD2EE5E99927
+:107EA00080CF36E6CA7D13E0E17E5F247967883AA9
+:107EB0004CF0084470F8F4E8B38BB8BE0BDA791DC7
+:107EC000E55B83BCC3F3C33CED5180EFCC139A2731
+:107ED000A0CDABC5973A557E1C480B2C718581C748
+:107EE000C1993C7FA16BFD9714EF2E47FD167039A9
+:107EF000B0E1CF21F73F4616E71C9C497EB7D03C46
+:107F0000044D2F45394BF8EBE172B6D3934D7CE726
+:107F10003CB3B790FEAFE7374646791F6BC548477D
+:107F200033F9EDEEA6BC911A8F45B2C073AE23D4DF
+:107F30001F337F5AA83C2856E274F222D4DFB5D012
+:107F4000151A271AD9B68EF8D779D49B88DFF1F5A0
+:107F500018D5BC3213DE2F11D15EF7D0F3B0CA9F13
+:107F6000DF51F5CC08E4AFF03E0A13CB011FED2C36
+:107F700040E54188F22330A55DA67CC738A650397C
+:107F800081B9A9ACE54126331F3DB5FC961416A076
+:107F9000F270D487442429999E23D00E19817A9EA9
+:107FA000A327DE4379937969142F2866CA1FB05D31
+:107FB00051F6E724F78AAE67944F0A9C64B9827938
+:107FC000250BB5322C14CB054C45CE7A5E5FA895B7
+:107FD000BDCB15E8DF99C3DB1B5FDBF8A4C746FC0C
+:107FE0004BADBF87D7F7941B97E760D964A0B2A4C5
+:107FF000B62FCE574CB3009F936731C2835FE729FA
+:1080000096E0B23B4F89082EAF2950A26625F49620
+:108010009FCF55ECC1E5AE5C655070FBA1054A0CE5
+:108020002FF33CD7F74D4A0ADABBF0B35B98C2F1A5
+:10803000107F5E35B993711CE51981E06501BEDDE5
+:108040004C7CDBC5904E816CAC9847047CC67C07A9
+:10805000D4B38966CAF73344D95207F247EAE92B09
+:1080600060627BD14F576C748FC675E9F99EE079D9
+:10807000ED6F98C703F4908B7A7E408D87046AB9C0
+:108080003F40A313EDBD7EBE8BE13D5382FCBCE9B6
+:10809000BDE3F6B77E3D1E1F51F5BDA3AABEF7BED8
+:1080A000EA97EED96FC018F389B597BEFBE79F46F4
+:1080B000F64910FFECBBDF534B4C5C7E48282F3A4F
+:1080C00023D8A270F72AFB5B5F54DE4CD72CCAA7DB
+:1080D0001826519C81697C9FF39B4EFC15F8E0B8F3
+:1080E000419AFDEAB0221C3258D2EC4C98B7D5C95F
+:1080F000487FADCF3F5882FCE77C19483058D7A95C
+:10810000DB4F23C531610FB7275A5218ADD79E26D2
+:1081100045A0BED4A0F24D0B8B291C89EB1F662411
+:1081200079AB5F7743B44FC0B8E2107F04F76FC4F8
+:10813000335F048C33C4E97052DE8A47949C582E16
+:1081400063F332A1BCAC4D949D30CEA1B65256091A
+:10815000E3564E033E4719E93C9F2256C5E371168C
+:1081600046F916ED09368A577B378E3EB002F9661E
+:10817000B2C832A0FDF886894EF47BD6DB62632953
+:10818000E6A4AEA7DEE6781DEF61782403BF4722A0
+:108190002956CC43DF76BBD189FC3CE5B949D16295
+:1081A00010FC4F79CF46607EFB139281EA9FA8CDE9
+:1081B000B5DE68C37B847E85F20CA4938A0DE6DD70
+:1081C000026D1261BCFBAB4EB68C62FDE343B4D3CF
+:1081D0001C82A7510EB3CE0F1AEAB734E9F4830715
+:1081E00066A9F1A4296C0A9EF3954F5D30A19EBB50
+:1081F000D426931F3DB749A0FC94C001472A9ED3C3
+:10820000A9FB4693DFDCDB24AA7E6B07F9AD0329CB
+:108210002C15EFD754B408A4178BDEBFD461BFE18F
+:108220009972328E337C527772B0BFEC89BB7E1864
+:10823000817CD45B6650FDDC8CC69165C59A06FBDB
+:10824000FFD82BF0FC099324E03D66FBC36204AE2B
+:10825000ABCBC4FD14CDC04FF17E6E734EC980749C
+:1082600068FA1AD61964B734C4A747E2BCBDF8ABA4
+:10827000907FFD744B36C547B637E5523E887E9CED
+:108280007BD7B30EB44F1AD65BE9D9A73ED595EA92
+:1082900080FE1FB7E6348290621F1F589584F783D3
+:1082A00056B4585844183C3EDD3A95E65B81F79841
+:1082B00071DE966233F2FD596D396684DBBDEB9554
+:1082C000E782E7692E76BF827C2FAAE539C2131BAD
+:1082D000F37B109EBFBE464945FDE274060B9B270B
+:1082E000F9EE2CAE67BC758D8BEE937C9C12BEDDD7
+:1082F000B1595CDF9F8DC43219F3D6D83B2B01CE28
+:1083000015404F75F0EA54537634E2AD89AD262618
+:10831000F59BB2520FDA73E7506F077EDE78D775A0
+:108320009B2BA15DC3DDA3DE45F67CA599EBCDECCF
+:108330000391E802F4C20AA4CFFF5A6095EA83F8D9
+:108340002FEA8F4A487E1A971BA626D16F067E6EAB
+:10835000DAFFC9DFD1DE41BC5582F0987EA6A8764F
+:10836000819AAF913485B471FA69987D9DCFCF30F1
+:10837000EEB2DC8AE7A9D7D3FBE0499F75048D8F65
+:108380007A6E3E532282D6012CC14FFE72379FB7C0
+:10839000A79D5A6F0406F36D90FEAEAFD7F6317A03
+:1083A000B38E5E9DDCAE03F80E18AF1BE30BED97AA
+:1083B000E16474CE6345E5E0272867DB45CAAB1E60
+:1083C000D7CEE3FFE78731F213F5379EC67FF1C7BB
+:1083D00038588523C0B531BE84CEB3BF7E66DF1169
+:1083E000256D42AF7D382629745D5ABB8C9E7DDD9C
+:1083F000C622B93ED881F699C5077C6F023E8F2808
+:1084000028BF33B7DD2E0DB46F3D3FC31F19D6BB58
+:10841000423D3219700DF9C3C79B05550F614923C1
+:10842000A7D0D545923FD85F09E27FC05778DE9E3E
+:108430004F20F834B79EDA7E2FF961EC0EDE8A9F6A
+:10844000D704A6C9419E07A4DD1364189A1ADC1B41
+:108450009FD2E0F8E9EE0DCF3E05AFCE3CB3E60B80
+:108460007C5A129645233CEF895F706D32B49B6055
+:10847000F625213F5DE9B3F4C13BAB862F69783F18
+:108480002FB4DE9214B47EF8D7BCEFA9CDCB504EFA
+:10849000EDB33A30351CF1CB13029F407A31D05303
+:1084A000D75DFF41F7F323A5B34B28BFBDD642F7F5
+:1084B000BAF4F07D729641CBA7A4FB1A1A3D45B4DD
+:1084C0008C66E85F3CA9DA4D2737819D0AE5C65ADC
+:1084D000B38CDF35E872142B4961C633D79A4FE06D
+:1084E000B9B2603B31BD779FDAF85D1EEE876C84D0
+:1084F000F18530FEBE8B8DF7AD4B59E904FCB21609
+:10850000BB56E1F3D4A6E5B4DF9ABDB55D6F429BDF
+:1085100086C1EE9B9D09B8EE11530474441A65BAE6
+:10852000EFE7F5FE8CE449CB347807F67C4B8731D6
+:1085300002F50F8FD740F1DB968EF8C89128A76C13
+:1085400086B071D6279C1C5EBDF2C4151DAC0F35DC
+:10855000E7737D48D853767F3AC0CB7B9CE7296A86
+:10856000FA87A4E2CD388B44FC59F2F23CB75E7D29
+:1085700088EBD5E751AF467D6972A5142C9F1AA2EE
+:10858000F977302AF31D1EBC87996763243F86E381
+:108590006505F45BD8986F561A7E27C3C1303F3704
+:1085A00016F41F19303BB18DEB3B91369B43413C98
+:1085B00056385D59E13F846764A6C2701EA34EBF62
+:1085C00030EBF40751577ED409FAC438D6A34FC80C
+:1085D000CC118D70B6DF37701E87E6CF05BD89EEF2
+:1085E000997918C01FF1D4EAA1F389064382E859AA
+:1085F00051E4F8C1BD7A3FDE67E3FE1589E24582AA
+:10860000D2487EFBADD9DCBF91CC78DC6B88C2ED63
+:10861000F909D33C5406FB81E250EC572C12F9F2D5
+:108620006E97FB39C48F34600368FFC58E67029173
+:10863000FB77D4CB59CDA5C5957E7C90FBFFBC863E
+:1086400048C7F63078FFCE1C2E97230FC1DE50BFEF
+:10865000BDDE4AF75B0AC4679A089F2619C8AFEDCA
+:108660006547248AE7AB7C36A6D8F5A693E2B2AE7E
+:1086700034847F92112C2A5076CDAA1F37E58EF4D0
+:108680004814F51F26FF9CE0E101D865C0BF6D3599
+:10869000F1B199F0FEF19A0D04573981FBC9B47B11
+:1086A000E77112BFDFDFEC3AEBC1FBBD1D73F8FDD4
+:1086B0009FC862E3EC74280FAF0D084877F7D89590
+:1086C00045A89734C93FA3F348CB920DE82F1B6A06
+:1086D00064AF5B2632F66C0CAF474189F58FD80743
+:1086E0006F0BCE27D9A1EEFB1121BCBEB2760ED7FF
+:1086F0006B3AF7012007A17DCC54FBFBA94AB2B726
+:108700007BCA0037E8FF8087DBCFDDCEA72A3D2379
+:10871000C92EE2F59EDFF2F6182F85FAA237D6545D
+:108720007AA0FDE369E1E7CD2CE2F07DFC8DEEC798
+:10873000308EF5D73A1EC7EAFF9CFDCC00BC658B96
+:108740009DA5B22B81CFAD322F0AF71D9975459C9F
+:108750008F74DA3A085E0CE479F455748F5EAFAF2B
+:108760005A918ECE49DBEBA6CA9C8F4C9E4257FB9A
+:1087700039EEE9C6BDB8DEEA4842FDB37E5577035F
+:10878000F28FFA03AB3EC47BE9E56566D25BCB8D25
+:10879000D5BF453BC87898E7BFE03726100F860065
+:1087A0003FC2FBA6B3AAF8F92D95B8BF56D8F391EE
+:1087B0002B0FFDB1C946C24B4D8F1D67513CE89749
+:1087C000DDA2E6B73371581DDEF7320E15C9EF1B77
+:1087D000550B7A2DEE2F9FE7EB2AF01FF2214DCF9C
+:1087E000B58D3786E4F59A7579BD465D1EF0D8C221
+:1087F000503E649F3C69407DEA576007E33AF703C7
+:108800001FC2A71FEC617C1E047B1D9F2F83BD8EA2
+:108810007EF057D767D2F3F5F50E7AFFE6FA69F4E2
+:108820009C911A30213E933F9AFC36CC2F905F4F9B
+:10883000C3B36D2373A1EED91C5EBF68F6C8FFF009
+:108840005C0DF5F16A7BCF3784873D65367645EE62
+:1088500078F28353F9D5C2CC15E4275AA0E4170265
+:108860009E24185C15F89D0776A785E216FAFDBCD4
+:1088700057A8E59184B7E3197EC220D48F535238AC
+:10888000B97F3FCE23025FC7DAB7D6EC40FA18545F
+:108890006C74211EA7A687C60F9E2FE47429CCE610
+:1088A000CFD437DDC307BAAFAFD1477FF5F5FB00B3
+:1088B0000506F55FEFB5B36BB1BE3E263C5D95A8EE
+:1088C00074D5EFF8366E4FB2D9406F43B1ACB70FE5
+:1088D00003945F72AE26CF4FE4F6BDE9AD3B05E9E8
+:1088E000AD2BC657877662D781559BF13B2122D2AB
+:1088F0001B9205D21BC63F347AABE1E7B114E90DF8
+:108900007E9D55FB9E2B0FE93189D397B067FF1AE7
+:10891000CAC7B88BE7D168F416A3E6CB47491D64F4
+:108920002FD28739B01FD0DE1601EFF17CF211256E
+:108930007F88450E7738BABB4C7ADBFC3DE9EDD732
+:10894000D704287FA2334D49427DC66BE27EABCB74
+:10895000A5C3ACD966FEFD8C2B7CC938CE16759CA0
+:1089600059C34E90FFAFC8EA10519E39650ED782A9
+:1089700049D9F4BDA18F0A79BF6FE62B1D445FD79B
+:108980007D4A7EDE0403A7DFF7DED8417221A5E130
+:1089900068F12CC4977522E9DBFA7DC5CD53E366F7
+:1089A000029F1734AFE4E038E221952EE575C73811
+:1089B0009F8F615206AC27C9239538312E74B5813B
+:1089C000BE2732A8F8680CCA676D3C38B824CC378B
+:1089D00041D5D73AB12F3DC24F876970083D1F2E50
+:1089E0001CC02F7B31FE51A8D2311E3DF971D57BC1
+:1089F0009297EBB7EDD78F784578BFA44F95AFF539
+:108A0000269EFF01AD25FC2EC0CB2EF79942F2FB2E
+:108A1000EAF4BFFD92DF8DFB58134D7EE52423D78A
+:108A2000F792649EB732947908CE5AFC4DD31765FD
+:108A300085E717DD50ECFE0BC2691B930FA03CB31A
+:108A400039D8228AAF813C43BCD8ED52CED2BCDFAC
+:108A5000510FCC2C56FE7B207C2ABE4EF906C7EF68
+:108A6000AF3EA7F8BF0E7D8BF45FC6FDA54BCBAA2A
+:108A700029376B08D849B8DE996A7E46FD305EAF6B
+:108A8000F957BD095AFC549987F993D12ABCC659A4
+:108A90005CAC02FA77A11CC6FB7B87037EBC176C1B
+:108AA000C17B6412FA5119F58FA9117C32F6173F78
+:108AB0007B05E345A63CFA9C0863D3B83DA0DDBF27
+:108AC00091F22FCFDF98325BF5374E6493103EA9B9
+:108AD00006F9A1E9F03EFBD18263783C931F5B115C
+:108AE00087E272EAB68652FCDED6AA9D1F6F437FEC
+:108AF000E8F4DF5A189E07E88F7E63D87CAE7F9833
+:108B00001C21BA2A29FACF4A8F11F951783CED2A53
+:108B100052F54FC4D3F8103CBD7A76783C25FDE77A
+:108B20007BE0E9CCD9A1785AA4C3D359B313BE17BB
+:108B30009ECEC775FF37C6A9609CB30B95E2D903DB
+:108B4000E065F64265E140F541F101B2FB46B169ED
+:108B5000D6E0EF1E6ACF56949703E427C46E3C49D3
+:108B6000F971F535E7284FB9CB76F26DB483FEABDA
+:108B7000C62207FBB3407F0FD1D75B40AE78C09EC3
+:108B8000FCA088E7411F5A67F1CF40BDB696DF478A
+:108B900028AFDD2660BEF790AA6AC10DFC2D5101F9
+:108BA000D311FAC728865EFF09FCBBD27484F4D9BE
+:108BB0007690C71E625FFC5E9A26FFC759AADF4007
+:108BC0003BB5FEEF46C7063C67261D407E5408F4C1
+:108BD00084F1CD6BBA41BE058DF7C6BE69E4579BE3
+:108BE000F135C8BF203F4E0E8C185CCEB32687F4FB
+:108BF0002B90D242EA67258D09A9D7E8BE33468D6E
+:108C0000AB4CDE918FF82356F03C8542392BA47D86
+:108C10007B592E7D0FE0CAE9FCFEDD9CCCE921E307
+:108C2000EBF582ABE13FA47751A707E8F504BD5E01
+:108C3000F0E3D9AA5EA0DE57D9680CE4127F623C4B
+:108C4000AF6EF8855F131DB4CB1CCFBD6567291FC0
+:108C5000A31EEC7FF4370D0DCA2F45BA98600E9015
+:108C60007F6ECB622B9DC7967D4FD1772334FF1744
+:108C7000D00DD1D1845C89F25CC7DB1FA4FE6C15DA
+:108C800097B37ABA146A5F24FD6FEB7CD81BD8EBDC
+:108C9000B9F3D2B8BCDD1F203F04BBD3CC506E7AF1
+:108CA0002503E58DFD58F0470823907E15924F2C43
+:108CB00089495ECA977C8F7F4F9131C7C66434FD66
+:108CC00015CA6B04B4EF7E43CDA345BC8D7032C78B
+:108CD0000628478DE7F41D3B899F8FCDC1CBD2D5A8
+:108CE000BCACD9DB3149AC05F36287E278D036BE43
+:108CF0008649F5E4D7F053FD30273B524FF3F3FE9E
+:108D00008995CCD50465B15A51FDCD6E35BEDE4D89
+:108D100071EF74C11189FE8D11A28BE2DED14CA2DC
+:108D2000B8F810564DCF28C1CF99C777E423570222
+:108D300000505EB09BCCF4FD8CDCA76D8CBE6FB494
+:108D4000CABC9DF2B20232F911EF39CEEFE16DB13A
+:108D5000FF90E2044D6FF3FB04F7A4783EC478E67D
+:108D6000905A81E13D56B18AC711C4D745C72CA896
+:108D7000176B5BE93B70895506F26B5D69AE3E404F
+:108D8000E770B785BE1FD705FDD1CFD56E3730A2AE
+:108D900057601E3DFE54F8E9BAC645718BAEBF0F51
+:108DA0002279C7747ECE7A37D7BFEBE3CD1CBF6C78
+:108DB00067FF807CBB313E92EEC72DBAB6FA6DE4F8
+:108DC000235BDE131D1B54FF33FAFF87E32F987FCD
+:108DD0006076A5A1DE69AE0AEFA73433D7BB93D185
+:108DE0005F7AD7CAA481F4A87EE3223683DF1C7D94
+:108DF000E9719186721E07D1D6A9EDB3D1B6465856
+:108E000026E36FDF332E52D64F5C24502D20BF1F38
+:108E10008EF513103EDC6FFD5DE322CFCCE5F2F65C
+:108E200072E322DABEE7AABF170162ABF91D14177D
+:108E3000A07333F4AE2F088E3B707DE5F89BCCDF3A
+:108E4000639C61BE5A7EFB99A39FA15FFFF0EE83F6
+:108E5000CFE073C68527CAD6005E144FB393BFF721
+:108E6000DD1FC53CCC870B8D1FCC755842FCF7F835
+:108E700083F849EB10F8BDFCE0FA62DDBA728DA10F
+:108E8000F1807C5B68FB99F1A1F5CE61A16533AB04
+:108E9000263CD5EF7743D4DD9427D7781B73F00CAD
+:108EA000F1A0F3102F5E360F3387DD97866FCC91DC
+:108EB0004674DFFE3EA77BD74BB7BFB196EC580395
+:108EC000DD9F3FB7A8E19EB764C40F33F3D0384E9F
+:108ED00005F1E8AB9F8E7F87623A92DB7323B45F24
+:108EE00096C7BF17D5279EA0FAF387D71CE8C80FEF
+:108EF0008EF70E76AF9E03FC7CB8EDAC807AC8F09E
+:108F00009A97A9FEBAC59307C4A38C9A431DF94149
+:108F1000DFF5CB30BA0CE8C7C8A87995DEF7A7F71C
+:108F200018640FCFDF2B33CB646FA9796A192ADE5F
+:108F30006494717FAB94CEE5CD1613976F1EA8167F
+:108F4000AF82FFB5E9F3DD385F3F3F8DDFEB60C0F7
+:108F500085905F69E3E9E59926076C0AD72333CA50
+:108F60001EE17245CB176CD3E7C5B91F44F808550D
+:108F70008DD46E6B9EDA6E3FD74FD96C26A15C867E
+:108F80007D86CD137D748E1A2FEA273F8D69F6E317
+:108F900082D73FC4FCBCCBB61FFB1977466A20ECD6
+:108FA0007DDB3D85DC7EEC8C08A4201FEE3485D76C
+:108FB000DF1B17CCFCE99C01F457CCAB4598F66B52
+:108FC0002F7CC7BCDA0FD57891162FD5F26B99D1CB
+:108FD0003711BFF39969FBE0068A83F693577B8FBD
+:108FE000DD11C07BEEDE8A08C776F6DDFDEB279C3F
+:108FF0009C9FEE98C3B8FF5E175FD0AFFB83393DEF
+:109000007185E373E85E58F8B842CF3E93C3FBE343
+:10901000AE98A7DDF757EF2B39B9DEA79814162EB7
+:109020000F54CB77D7BF077BE8CC9C20BF9EBB2ECD
+:1090300083FC76F5268EB71E997F4F50D31F6DA8FF
+:109040003F921ED542F5D1555C9FD4F42C498D6BCF
+:10905000E8E909E8E3AF388F60E374ABE9893DF4F0
+:10906000711DD007D0E530C6E34A06356F74989578
+:10907000A7A07F573DAAAFFDF4B5FD3BD94F753B87
+:1090800023C87EAADAFE06EA55ED35DC4FD869AF73
+:109090007E03BF7FE0794F24BDA9BFFE9A1D95389E
+:1090A0002FD48EC2B822E263A2CD27C857A01D15C7
+:1090B00030B9617DE56847D9306FD53DAC28A1AFA7
+:1090C0003DD575F79F29DF15ECCD94A27F047FD0A5
+:1090D000F9970EAA791007469E25BF8958C3ED3D22
+:1090E000B186C7438D653C6E6154B81FC50CF2084C
+:1090F0005D819A1F658B23D48FD295C2FD2889F993
+:10910000D57ED4034DD32C9242F291FB55B4BCF6DC
+:109110007116DF1B781FA33ECBC8300F1D1455B24C
+:10912000032D6A7C83957179A5F94DF479D3369D29
+:109130009F44EF47C92F0AF59B3C2EC8F74E87790D
+:109140009EDF5CF016A2ED7F6E5D11857E93177D2C
+:109150000D7354BFC9A3B89E7D1F72BF49D73E6E21
+:1091600017B95181B92A1CFEF58953911F64DDE1BD
+:10917000F5142FD3FC5089552A3CD4B80FC217E1FF
+:10918000293A393C6374F0F40ED3E2422A3C133896
+:109190007CCB8B5CE47792109E522F3C353F95F749
+:1091A00070077D5FDBB2CE227B089E9F91BD6A4235
+:1091B0007822FCBFA71FEA9622D52E55E139F1D1BE
+:1091C000EC87F03BC1931E2B3D86CF29DB6E8BBB1A
+:1091D000019ED3763E548A4FF63A8F13FC752EE7E4
+:1091E0005798D91D4C8F3715CA21DF83D7E0A9E1E5
+:1091F00061AFFF8E913FB65CE2FEFC72150F33103B
+:109200006EC1FE3C4728DCB6A8F992C6FC6A0FDAAC
+:10921000BBC37570D3F0B01EE186FC2EC62C7BC894
+:109220007F572BA03DD41F1E0E6FBB3C3C7C588744
+:10923000873FDB9C7D2FC2EB85ADA56FE1F3E7BED9
+:10924000DBA2105E7B773C34A71FB82587F07974CA
+:109250007227F485DB8962F70EE40F331C3E23F19D
+:1092600059C037B47BB7374DB486C66734FEE8B40F
+:1092700086931F17F72FADA1BCC2FAB235C41FBB2E
+:109280007AF863B71DF3102F953FE6CDE5F7FACBDB
+:109290006BBE7A6506C035AFE604D19F11E88FCE6C
+:1092A000ADF68441CDC76011202F12CB981FE3C7C4
+:1092B0004398D51725507E02F14D2FE639E3074A32
+:1092C000F57E0AE9D5BF09441C4C3024011FC7DCD8
+:1092D000A92B490EBE5934B92F9F6D2F3390FF67CC
+:1092E000BBEA1F2C5BE03A8CEDB4F8D66E97F276B1
+:1092F000D1F7F36B1F2F0AF21776C6B01EFF1A7E46
+:109300001F3CAF669B807928436A6F25F99058A669
+:1093100030940FB7CEE67462CC9768BF7DFD6DDDEB
+:1093200079682774E28DF62CC2838F110F3A6B9EF9
+:10933000243CB87215F78F74D69C8B0B8F073511B0
+:10934000DFCDCFB83D444E7A6BF8774C3AEDCAEB9F
+:1093500019978107CB543CD0E424CA1BC427635916
+:10936000E051F4630F017C88484379C9F9B108F2F0
+:109370002A0AF623F6E37FD4E8A10BD6661984F710
+:1093800084F5F900D5B4EE7365B9FEA903ACEF928C
+:10939000F300D4B864BD1A975C5AC3F3573BD77D2A
+:1093A0005580EB3D5706F601C0657B9983E1F9CD09
+:1093B00002C52A600B9EA74FDEEAB0B909BD71480D
+:1093C0002D9E7FA2D8958AEF67004E25C5625EAFBD
+:1093D0001AEF19A67E075A87FF80E7A3E6925F4E31
+:1093E00022B9A1F9D119EA8D76C46F6534D64F3010
+:1093F00057274B84DFEEF1586EDF7727E52FF4FA1D
+:1094000007793EDCF7F66F459B29BF52F36F79ED84
+:10941000DCBF55C10205685F531C01F976AB85BE00
+:10942000D75029C866F2AF95B895B9A4F7B8281FE8
+:10943000D6BDC02A911F6CD5AE64E417E58D22C954
+:10944000EBFEEC92BE7476997C46A5BBEFC067AE8E
+:109450009F7B697C6631EE2F88CFDC30F77BF099FB
+:10946000F78B42F90BEA9D75304F9E4A4F3DFB56F4
+:10947000E3F818BF8AC80AD247D5FDEAE9A88F5E8B
+:10948000FA7F1F5DDD83700D43571BF1FD65D055DD
+:10949000EB45E8EA413CCF20BA6AFF17A5ABA72FFE
+:1094A00085AE94B92C344F3A8E7FE7795C9C81E786
+:1094B00059FE1FCE931EA3DAD9FA3C69C6AAA95C4D
+:1094C000046743E7A396E74D6232C6992CDB5EDE64
+:1094D0003456E6E305FB3B99CECFC9747E4DBD7E85
+:1094E00017C60F1AE2F73CFCD4EF0E8F855F9F7E04
+:1094F000F6BF49AF7D7BA640F7C9E78DFE6A3FEA1C
+:10950000A0C51B97A9F30CECF7FC67FB39F127D832
+:10951000AFAADF5763D4DDEABD81CBF37332C7ADA9
+:10952000F47DF3F66AE640B85FCCEFD95ECBF3A6E4
+:10953000B5BC66D74B950F2F9CC4F3E9D0EFA9F7C4
+:10954000776AF9CAF5B665A4E79F54ACDC1FABF3A4
+:10955000772E8B936FA17B8C7DFD9D91F3FE01FE99
+:10956000CEDBE7C8DC4FA3F37B96CE52E2E70D904B
+:10957000CFD019E360C8EFF26C3E01E3B5EC4236A0
+:10958000F97586D802F47DADF29A1CD2034716BB5A
+:10959000D3701C637EF7E72F4EA27C03070EA5E76E
+:1095A000CBA067A6CFA33CB67F8E9FE09FE5E7FBED
+:1095B00068CEE5DD9FFF08E13D79807BF472E0B184
+:1095C0002878FF789D9DBEAFF5FC6C59CD3FE84EE5
+:1095D0006981FA77EF3A7310FD13BE3603C3FB6D52
+:1095E00097EA3F6AB8885E6CD6D9475B7AF462DF47
+:1095F0001B5383F4E286F5CE7DA7C38CA3E9C5BBDC
+:1096000074FEA3721BD78BCB6DDD26B40FCAE3BFEC
+:109610007E05F34E8D55AC03E5E210A59AF4E144C6
+:1096200089513EF1FF8FCBB37F685CFEFE79A1715B
+:10963000F9096A3E0AF278FCFE4F97E6479DC6F5A7
+:10964000868D466EAF78157817268EAE8FCB0FBFFE
+:10965000B087E2F2ED7BAD748F6FCBBE663E5E0EDF
+:109660009330CF3C99A9FA5A11F797EAF58FC74D75
+:109670008A356D12E2BB81EE13E23D41F28BECB50F
+:109680006E437FD3783BCFE7CE7D67F14ECAE7D6F6
+:10969000F443D043492F2E0BD07799CA250723BE18
+:1096A000133FCD4FF1F15A81F06BD93C4E6F4BF324
+:1096B0007DA41F0E2993047E4FCCC3EDF8541E7772
+:1096C0008E44FC82A662268FFB4A474407C69DEF64
+:1096D000C3A6D3F1FE2AE3DFAB986EA0BF43D12E21
+:1096E0007427215F6E1594647C82CE44F71E9F8D93
+:1096F0005106E3DF93AA4F31D0DF933A54D09884D8
+:10970000EB6BAA6B4D42BDF015D52FDE5AF009E583
+:109710003F98C6833E9846CFB07F77F4C1F982FA6E
+:1097200077043B92E87B08ACE543C2AB4C33E37F64
+:10973000E7C7E15F8EF474DA46FAC203828FDF1363
+:10974000B25BE93E5ECB18737225ACA7D96E266D6D
+:10975000C23B66E6913478DF9C2045631CC09B9633
+:109760002EA1FFC81BD3F83AFA419AD3D219E6FBCF
+:1097700037954DA1F879D3056030D0B37EECA8774A
+:1097800027C3FB8D4280BE1BE4996E60984FD8368C
+:10979000666672F0BD4C51D2CB4907C9055136D02F
+:1097A0003D3F518D678B7DE2D9A1F1E949EABE6564
+:1097B000D6B288EE81C69B25DC6FF998920FE99EA0
+:1097C0005BBC99F282CA4D8C7FF7630CA373D1C343
+:1097D000AF7E7D685CC1680B5DDF460C4C531EF6A6
+:1097E0009695881F0D0853CAE3BE7725F2A5869E7D
+:1097F000FA465E8EE0E5AFE7D5AD44392833FEF793
+:10980000491A3279DE65794209F1E1725320EC7729
+:109810007E2FB61E99F914753CF63F39DEC631E647
+:1098200045BEF1171FAFF75C407DFE0EE36AEDF415
+:10983000E3EAFBFD4FB5EF6F9F89F3B5BC7A46793C
+:1098400010A422AAF7D9504F36AAFCB03E778ACF8F
+:109850002F233FF070BA883184CDB3ED9F3E82C68E
+:10986000E749BDC46F697CFCF64C4DA11FF923BECE
+:109870002F49EAA59B9EFC0B753CA87A15E5C3D63B
+:10988000F942CFBAA5C1BDE3FEA62CDB8F761CD86A
+:1098900019729C230CFDA9791AD43E8DF26D283FD4
+:1098A000868D65C447B4F646755E7DDEC66E152F9F
+:1098B0002E376FE334EE6112C91AB207BDBF6DA136
+:1098C000FC25861FA342FF5C9644F7E1EED5DAD96A
+:1098D00019D971DA3944B0DE1FB4D392B482CC46C0
+:1098E000E23DC38DA327D0DFA77C74F7833FC1FC83
+:1098F0008DCDCF6CF8233E23474EB87FDA24BC478A
+:109900006F70A8B9D4643F69F934B67FDBFC35EADF
+:10991000A9FA7C95C6F12B5AE8F882CF311DFF2EAB
+:10992000B2A0A07FDF62B36DA7EFF95805B21FC4E4
+:10993000871269FD4995A1E7DE2E281FE077FF3CDD
+:10994000F709C447231CA1F9377A7BA3A9E75C4335
+:10995000ED940784F071EFD7E6733923EAEE89B608
+:109960009A64FA8E6DEB46112399AC759D85F8D9F2
+:10997000EFE72F5989DF19BF03191ED4B75F63A61C
+:10998000BF6BD56E97AE5B8465559E6971E607AE79
+:1099900018E50BFEFB47AFA29C85F95AAE31933C0C
+:1099A00060C66ECA63D7DF0FEF6367E9F0EE6278D7
+:1099B00076C3FC5835DFC04772A5C7BE1F6DE0F700
+:1099C000A0471BFE25EE41BBE787B7EFBFEF3D6821
+:1099D0008AEB25F4A55F2DFF6F4354EA62DC7FC359
+:1099E0002C337D2FEE72EDDED6752B495E786E65D9
+:1099F0008E0C47DFBC30D74B23097FC42691FC7106
+:109A0000BDF8C5EDDA5FCC33F5FC9D166B109FD425
+:109A1000F2821E52EF153FE46AA4FC19AF93DF2BCC
+:109A20008E685949F6722BE8619857A5D9C727A7C0
+:109A3000A54F1128EF47F1E0773D4EE6AA79415254
+:109A4000687E0B53F3FBB4F95AA7A5D37C5EB4C769
+:109A500007C003A353CDDFD38DD7C3AFD1EE0EB272
+:109A600097C1EEFEDB7CD8DFFD36073AE3A0FE654A
+:109A7000AA6793622FE91E6817FE0AED7E50AAD0EE
+:109A80009F48F9DF0A551CCD00800000000000004F
+:109A90001F8B080000000000000BAD3B0D7054D57B
+:109AA000B9DFFDD9BB1BB29BDC0D9BB8C1106F02A7
+:109AB000D1203F5E304913C572F303244AEDCD0F28
+:109AC00009BE01DEA26871ECD4ADB5BED03ACDC5F9
+:109AD0006C4888084BC4065F1D8D54FBDAB1D5D4A1
+:109AE000D7D7878EED5B90E7F84FDADAAA333E1BC3
+:109AF000D1F2FA3A9D37E96BB1E98C2DEFFBBE73D9
+:109B00002FD95D36809438E3E1DC73CE77CEF9FE51
+:109B10007FCEB655D53AF91180E350080AB61F85B5
+:109B2000CC35610078DF6706CC2500A7E86F1540CB
+:109B30007FD20729EC836A0260BB0E263775E07C72
+:109B400058E88327B15122CBF9FBD690ADCA4180AA
+:109B500012BB12A078667D1BEC57EFC2F1AB7C63A1
+:109B60002D500390D80ABA834BB684922AF5570336
+:109B700038801BAF351A031508B7F505DA086055AC
+:109B800078240232C0B2E70F94C5687FC7FA7975AE
+:109B90001DD054FE5BEC9FB09B717DFF1B8A791F2B
+:109BA0007FD10FC770BD1A5560182148CFAC8C4EBD
+:109BB000E279D4E089F7A000E0BA29809680587B4A
+:109BC0008AE04F07A0A57AA6DF8890D3FBCD81D28B
+:109BD0008CF9ABF58A8C71052C3325E1B9A38B3256
+:109BE000E6856A6B743A6F9BB13CE3FB0DD50D19AA
+:109BF000EBA1453D3E89FD95F8DFA94A8227FA3C55
+:109C00005E01105C82FDB4F52AA4F571FC1A3B14C8
+:109C100039B1183B9F81CF9C52882EE60620BA802E
+:109C20006C3E897829793E30998FF803CB32222512
+:109C3000880F1A3200BE6CE3E25AEC074FC884FF6B
+:109C400047F271EF52C4B33E29139D401F97F83B72
+:109C5000C0F830223BAA5A3C0FA2A02770DEA5E034
+:109C6000483AF6435148527F3E24793EFE251F6C08
+:109C700040B60888F5051D60EEC5F1FC258E24610F
+:109C8000BFA8154C05E105CD0989CEA9E37A05F9F0
+:109C9000A01452DC2F6B85897E866FDD47EB4B7BF2
+:109CA000411F2825B00E8F8F6D0487CEF33898E0C2
+:109CB00057081F36C002000DE2DC5E064611221175
+:109CC000BE0DE60AEA57C1242115A93A2651FF1212
+:109CD00018D7A90F90027B2936936AF84480A70011
+:109CE000F1A9C7AFD92DED74C2A30B4E1EBFD1DAB7
+:109CF00066237F77DF545B180BCEBE4EED7D71BCC3
+:109D0000E5EA99FEB76D83E542ED5DCBF2A2F6BEC2
+:109D1000C4E3476DFB2B36D26319C20FACF8F4F8DD
+:109D20005FA6097C2624301D9C9F78EEFAE8161C5D
+:109D3000779E0B985540F8457C125FD407A65E6964
+:109D400010EB891E11A407E1BB6809488483F9441C
+:109D500007FCAE211D76311D930CB73C0EE60E7745
+:109D60005FEA97221D882E63A0CF21BC2AF14F47BE
+:109D700007FE4338971C0A3C3E2C1176912E0B2E81
+:109D80000A5DBE752174C9A607DC3B17A0E16CFB18
+:109D90003A4CC76F49A93C69019105E983F7919055
+:109DA0003E84CF28087A680026E12917FEA99F572C
+:109DB00003C67DDC17F3899E4EC30CFF1722FF8B71
+:109DC000BE90AF30D241F4059D22242FD88FDAE324
+:109DD000BCBE682BD80F94123D2C469E0F62DCFA55
+:109DE000614AA2B65232995E0B145BA67EBE9412F3
+:109DF00048464A923E28009DE9330FE2DC467C53F8
+:109E0000874F91BE0ECA634E05B5CF36D23EFDEBED
+:109E100050C390CA0F8D34325FDE0E7A15F25DB9F1
+:109E200066B1FE2EBF52351D231D5FF7317C30AC6D
+:109E300003646FCAE5100CD7CCEC9BF099D124D207
+:109E4000EB58E8C491187E9F53AA80DF9CC1F37140
+:109E50009FB81FC1542E257910F211ADC7B384CF1E
+:109E6000D46F5155F06D701BE20FF1B19906104F90
+:109E7000D2D0BFF3F7479A85BEFBAE1DFB88F885AD
+:109E8000F413E3CF029DF4936E02EB4DD9707E4341
+:109E900076F1E490DF203E85E4A815C07DB6B8FBDE
+:109EA0006C19F27F2015A4DD33E18794A79F2B69FD
+:109EB000BD5DC8FC6C4A10A83BFF7517CAFFD05B9C
+:109EC0004CCC764EBE6D7C6665E1E492D9E76924A0
+:109ED0001F73D3D7093A6911E4A7208DBFC4E3E704
+:109EE00082E3EB3D9C21671E1C5FD46638BEDEA377
+:109EF00042DEC86E213D6F43BB358CF8FE474BD721
+:109F0000045F4EFD27D9F39BE30526D9734611CE96
+:109F1000BB25298D0D233FDE0A718DF85482850EF5
+:109F2000D16FB32399C338A572D7D602F617A045CF
+:109F300027FC48A96B95538B3F051E5D3C6D4EFD7C
+:109F40008FCF08115E43F0A1375E3933FEC78D0B0A
+:109F50008ED51AA4B483D544DF7C97BEA8899CD73C
+:109F6000F09CBE4F0A615847EECFFFC61BABF07C9A
+:109F700003BF504CA582E6696021BC3920EC783ED5
+:109F8000C9E902E297F1D41DC46FBD853ADDD79BC4
+:109F900007EE3C076216DD331FF500C195F37733FA
+:109FA0007FE6176886C2CC8F1A27FD1E01E4BB121C
+:109FB0004635FF156BA914C9577153C0DC91095F71
+:109FC0003A45EB112694B8F790CEDC7F29F5033C97
+:109FD000D478CADDCF0AA4ED97D5F745D3FA20C6C9
+:109FE0009DF4F9A606A934BC9E961757CEBC7307FC
+:109FF000835AA6BC64ADF3E8B1C427F8635E198C3C
+:10A00000EDC0F30E0D1D6C247D335A0C861F8706A0
+:10A01000377F47029CDF44BA98EC4F0B8CF925DA66
+:10A02000C718AEC6BEAF2CC8FC73C96FEDD41D08EF
+:10A03000E70BF57EDD409CCCFBBDA537E2F86D65F6
+:10A0400001D342FA26DCF94E0BFA5962FB5F915FAD
+:10A050007AAB7B5EA605CAE1BDEDC2CF52C35D3BC4
+:10A060005FC3F9FBE629A0905E53369A649F6E5554
+:10A0700001E616617FBF8FFD3EF4EFF83EFE964C81
+:10A08000BFEFB6477C197D5F969FF8F576F403899C
+:10A0900068AE1F38D00EBC2F9D67EE8ABF1F3E04EE
+:10A0A00023AC3F97AA13B29EC3AE7AF8979E0932AB
+:10A0B000FE7F528C78A575605B7762DF8F78247E97
+:10A0C00045455D508B78B2E89F06F9C93FBA8BE6EB
+:10A0D000FB4F22FFD27C25D87227D1E152174F20A7
+:10A0E000CE65E17F74EE6C7FD89FE50F679FDBA3A1
+:10A0F000C3631E7EEAA08EF083FE39FB07DEBDB28D
+:10A10000EFF3421F6A0EE4A59FF605B84DF5E9DCB2
+:10A110001EE98B727BB4CF801674AC5EEAABE6F6B8
+:10A12000E53E93BFBFDA57CFAD878FD9F44DA8581E
+:10A13000667F61DFBDF2180993BA447FE50AE2DB6E
+:10A14000B714561F3A1879EA02B643A0E2BCCB5ABC
+:10A15000D5318BEEE2C63F97B87CB6D83F75D88F25
+:10A16000EB92A560DE470BD16E6FAD99897FAE9BF8
+:10A170009267E40428DE9933636780E29DB919FD94
+:10A18000E6C0A519F357EB0B32C63DFA3ED628E4DC
+:10A19000666D7471C6FC7D2D4DA92F905FDFE0D7F1
+:10A1A000159DE29FAB33C66FA8BE36031E28EB4C4D
+:10A1B000D2D3451BD3E8C6F7CFA4ABB6EDEC719074
+:10A1C00047E7F7DA33E3A1D9E89BCDB71E5E8B4EA4
+:10A1D000E355C495098A2B0DBAF712690B82DA731D
+:10A1E000DA2FB1C00ECDECABD6637CB9ECE2C797E9
+:10A1F00005145F56E48A2F3FD2897FCF195FB66678
+:10A20000C6970559783B577CA97564EA95F3C5E76D
+:10A21000E6F2F81BB514EFBDAEB01FA8B4C6D9FE68
+:10A22000CD9D50CCB508B7D8F5C74224F3386F732D
+:10A23000ADC6FEE53E988C92DDDF2B215691FFE7FF
+:10A240002E314B49DF3C1DB64A6EA238BF4D360F4A
+:10A25000E292171BBF1925BF63D78EC7A36894600E
+:10A260005187CCFB261B4F6C22B9520DF4E3246EB0
+:10A27000ADB11CFE8937FFAB033EB6037B37696384
+:10A2800012CEDF1BD2BB3750DFDD0711C2F676B42A
+:10A29000F6F231F2FFAEEC3004BF801325FA3FB87E
+:10A2A000A9AE948D948AFDA534DD643B3E1C32AD8D
+:10A2B0005B887F7E1304073F3D20E90512D98B4D53
+:10A2C000B2FE24DE73B475C5BB5BB1BF2BA8992465
+:10A2D000F089705D29F197B219DD1EEC8FB48EBC48
+:10A2E0004CEBD52A99FB894D971F23F779B4586F0A
+:10A2F000ABA4386F7525611A94439FF4515E231106
+:10A300003E11A5F5FDD788F5B3D147D1D3EC39700F
+:10A31000FE82CFAB2C94531AC2515E38F15782A7FC
+:10A32000A4DB71D6E3997EC57058A32001D6FF7CCB
+:10A33000E1F71C9554B965111D4751E6094F9B374C
+:10A340007514523CB5D937599CCB5E0CA07E4D5D3F
+:10A3500091E66F4632FD846CF8FC5747F8C53F59CB
+:10A36000748D123774C1BFC48D6BC652843748B622
+:10A370005652DC1B147679363CA8C14C3C78F01957
+:10A380001EFE4FE9CDB3F2D2F080D74A91BF73479A
+:10A3900087C4F4FF22F141AD3806C51DDEB9D4569D
+:10A3A00099D779FA01F978C338F1878BF7289A0C95
+:10A3B0009243EF1C5F75E1DD739AAF706A49DA3939
+:10A3C000566A2E3C93E3E2AB342157F02BC57CD286
+:10A3D000C84127D77FE3F51533E3AA7BFE2B0E6830
+:10A3E00019FA7788F6C77BBCBDB1F3ACF1F2A2B124
+:10A3F000CC75DFE9003EEF958A75E404F95257C841
+:10A40000634F22A8C557C82CCF27D1FF22BB361BCC
+:10A410003C8FFE2C6225CC5D407ED9CE4807F3F9F7
+:10A420006CEBB4B109AB6219ED0BF171E4AF45D13E
+:10A43000CC7379F3BE73FA5E5F8139741E74C8C938
+:10A440001EF9C75216E9693FC291B0AD7EFC6EFDA0
+:10A450006CF7F6431A7CC4E74792D0574E18F8BE03
+:10A460008977C7587EE0D0D48724DF894525C63058
+:10A47000CB0B4417D6913F22EEE5CBA2D3709E8042
+:10A4800033B25CF8A9236EDF592AE042BA9CE2FAA3
+:10A490003C37AFF242C702C6BB467A8688AC5AE563
+:10A4A000C41741F5878E8EFC3027B80FC2D8FA2327
+:10A4B0005B1C6A57951B7BEAF15C238B64B66323B4
+:10A4C000A1D8E303A487160573CAC76BAE5E1C222E
+:10A4D000BEE5F8092C99E44EF284046232D26B9402
+:10A4E000391FE0FD8EB0C867E9C9FA9B118F6FBBB9
+:10A4F0007C81F7E1F5D9F0DF3D13FE13C4AF0917F6
+:10A5000038C1D982707EEDCA0590412971E33EDCE5
+:10A510002F6024EBC95F98ECD0C5B8BADCA4FB8FE0
+:10A520008473EF37E9EE67C97189E65DB251AC8794
+:10A530008058B7579ADA705CD093E589F6A7F17C1A
+:10A5400033533F64C3CDABCED4575A59E6FCFF75A5
+:10A55000F92F3B1E7A40CA7DCEC24E71DF55E5C051
+:10A56000F688F8E2BE1C7C912DEF1AE53F11EEDF74
+:10A57000880EBC9FD03B4175A229BF86EC3B98FD5D
+:10A580008CD8C37CDFFBF26FE43879E00691E7D02A
+:10A5900054A1B7CB362018B4C7F64F5A1CEA2B7714
+:10A5A00083EE0F9F89874F1BEF91BD71D2D6873BFA
+:10A5B00081CFA9A4C781788FA4CFB891F64DEE5270
+:10A5C00080FC80E476FF865C76BBB8C3E7E95D8EED
+:10A5D0006B55972FC0AC0019D71F784BE1BCC081D9
+:10A5E000FA9D1C17276CCD902A284FF1086CC7F1F3
+:10A5F0003F5A32FBADBD87EEFDF5ABB8EC784B654D
+:10A600009D24B31CC1AD38FF38C6C5E43793FC6543
+:10A61000E46310B181BA99FD922D95BC5F02F79366
+:10A62000CEA2E7541BE3D66567C23B6D8FB3F2231E
+:10A630000325B1DA4EBCDFBEA0A8B3285E7EA42BF2
+:10A64000725E791D0392A95ED22B1B81F1106A1BE9
+:10A6500081ED944F888A38E348AD5FF0D776C98D95
+:10A66000CFA0053C3D857FEB361A0FCF25FBF28E40
+:10A670001FAA70BCE9A9D755EA8F94CA75143F5F29
+:10A68000A54DDE7F158DD7F9587F3422255319FC4F
+:10A6900091F2CB513E8FE6B68A685312B5CD81FC5C
+:10A6A0000C7DBD5ACF8C3FF64C1F510A893F753047
+:10A6B00025C4F39E46D32A24DD634EF6D3F73DAB83
+:10A6C0000D73D8207F38334ED9D3A6097D5A21EC9B
+:10A6D000CEC861E361F2AF067BF3D8FF7CA04C16D5
+:10A6E000F75E0863C40F6D46665C33325EB96B215A
+:10A6F000C959D2C7F9F2EF8F8BF95B772C1FA3B83A
+:10A700005477FDD5ADA54DEC87C280987743F5E22F
+:10A71000ACFB4FE8C417C9ED3E20FC0F96DD3C446E
+:10A72000F9D00F12BEAB495C5EED3432E2C22D03AC
+:10A73000B7729D6840839BE8FC7B3669CCFF7B8ABF
+:10A740003F38700BE9E9E2398CE7D14D5A692C4D5D
+:10A750001EFED6E9673918DD24FC8B621962E339E5
+:10A76000C6FFD629F4D0E76E07BE4F01DA65033F76
+:10A77000196A3CE5277C9401FC335D27FAD1437CC0
+:10A78000FF5619AAF08823918DECBF65F359B0AB41
+:10A790008AE19DB68FF572061E7D7E3BCE79EE1B5B
+:10A7A000C0207DD5D28A7D8AEF376A40FCE68FDEF5
+:10A7B000CDF72CC27E1EF603AD4947C57E6061EC25
+:10A7C0006AF25B5FDCDE334479167F44D689DFFCB6
+:10A7D0001B6FB33B697E8D0FF2707C000C294AE73A
+:10A7E0007424207D6D40AC95FCF591A8AC53DE66D9
+:10A7F0005D62FD36DA7F5D640E109D37B7C9BCDF40
+:10A80000494BE3A45531391A94FF2A09B2DD7DDFA3
+:10A81000177FB807E7BF8FF47260E65E873A2BF9BF
+:10A820009E794666FC1C8024DBE195D6C446DA6737
+:10A8300065BD46150D38D270E200F9EBA3B57ED3A5
+:10A840008FE71A6D9018DF1FD7FAC6F0A8F0536D86
+:10A8500042A17D7FFA31F246452EF93DBBDC64CF43
+:10A86000DF53DF11207ED809135D841F675A66FB12
+:10A87000953DAFA14BD07F27E285F0ECE079AB2886
+:10A880002E9A42B942E8E169FBBBB760FBA54E9541
+:10A89000E77DB55476A82E34D8A6B19C0C866243C9
+:10A8A00015D4477EE7782812637E1E298DB01C7A66
+:10A8B000FB8C34745713BFBC519BC77EFB973B4F37
+:10A8C000DCEE2C44FDA1FCFE5F9FA1F8A94C637A4D
+:10A8D0000EFAECD4ABC4D76DC25F3C3AFF1E96BBF8
+:10A8E000818D3703E10D9CF83B54B71AA86960F8D5
+:10A8F0005EBE6164BEC8270D44EE7228BF91AA17E0
+:10A90000F905ABF820E7F3BCBC52A3ABC716FBE3D9
+:10A91000AF54D1BADB55511756CA12A40FFC945745
+:10A92000A2756A66BEEBBAA9CC38785E561C9C9DAF
+:10A930006782C0C4C24EB4A7BFEBCCCC2BD1155894
+:10A940008E6BFC1C2F8ED68B3828E98B97EA4BCE6A
+:10A9500094E3375D3F78A22F801C00F0F33E9DFB0F
+:10A9600005D61F76CC45506FF545F9FBE7573E2ECF
+:10A97000A5AFDB53B33E60B0DE988C12DC6C7D91EA
+:10A98000CD07BD9D7398BE18A701D177CF14307E37
+:10A99000430D2B52C4A727FF041C877EB6652208EF
+:10A9A0009567AE4FD139FD94FF12E73C4AE7F45367
+:10A9B000FE4B9CEFE53E83DB57FBAAB95DD3052236
+:10A9C000CFEFE983CB501F20DE5ACA449FE49FECAF
+:10A9D0007051E4669BF8CB1F557592EF40593225B4
+:10A9E000A5E983D150FC5DB2CB83C541E6BFEC73D2
+:10A9F0005DDE25BB762F7E13C1DD837009EF2F6EE0
+:10AA0000FFEF8716D03E6F29CC57451BBBB7B1DE91
+:10AA100041BD90C7FE86D087C9E220E71D46B757E3
+:10AA20004951EC6FDE211CDD73CA3DEE3386EB8E9F
+:10AA3000A0BEA6FE20CA39DD67B0E1833B689F8FC8
+:10AA4000FF32872A7C48EF5FB1DCBF8101C8DC8B15
+:10AA500028F79E9CBDFE8B43DF233933C0EE39249B
+:10AA6000EECF7A70343491A4FB0FFE52815C78BB38
+:10AA700050BA82757E7EC8983A75F8542447DDD066
+:10AA80001275C3FEF11F71DF59075085FD477D56D2
+:10AA900080F8E0D11DF259EB868FEE387BDD706CCB
+:10AAA000BF0C7E7DE61C97C224E7592984A73AE0B3
+:10AAB000000D617B4357EC962EF623455DD168A0CF
+:10AAC0009C03F5F539E43F1FB5ADAD3C1E2962BBD3
+:10AAD0001F55C75364D7A3542F37E8FD82C3754F62
+:10AAE000CACFD2FB85ECFBF7FB269BF87E3885EAC4
+:10AAF00095D9F54929F86351DF5F20EA905E7D72B0
+:10AB0000993679F07EC2D34D01C643FF73D7BC435B
+:10AB1000F52FAF8E1F75EBC0FA36D077887BDCDB64
+:10AB20004571D00BA21E0AD7E03D96D3269395ED32
+:10AB30004BB9BEB983EE71AEF39F6FDD709DABDF95
+:10AB400090B9C7489E7FEDE2D39BF74D92C75AF26A
+:10AB50001345DE1A0A34D6F34D4F0541217F39A43F
+:10AB60001D2439D90293AB499EFAC3C26F4BECF353
+:10AB7000B1DF36DA65F03EC59AC5EF178ABF966732
+:10AB8000EE403089C37A01E591AEE9B446BBF81CCA
+:10AB9000C9AE0E3AC790C2FAEEFDAAD5FC8EA94DF9
+:10ABA0002A64795475AB3C5D5F1EEACAFD1E695587
+:10ABB000F95407EF1F9281E2AD449EF9B241F8FECD
+:10ABC00089CA70DB40BC5782ADBA3484F7EC0F1EE3
+:10ABD00067FAACAAF22F27FD74C8B5AF8950EEB85A
+:10ABE000EE59171FFFD01EFB21D1E17A986A26FD8E
+:10ABF00086A26D3AFCAE45C46B87485F8A78F75EE3
+:10AC0000B96E26AFF5922F7688EE6B7D5FF813FE56
+:10AC1000A8F0EB3152E37CD007EDD67304771DF139
+:10AC2000790D2B2A7872790E3977CF714797F51FF6
+:10AC300004EF98BBDF32DDE2BAEB3290CDFE485A2A
+:10AC40005DDD38BFBABAA4FF58D4D3AF157C0C2F42
+:10AC500038820F9B40277942FE3B46E7F3DE972C74
+:10AC60007B7E5B05D75D2EB0BE9DDF61BD4DF04E96
+:10AC7000D9F6BBD4BEBFBD0718DE79BED758551E66
+:10AC80008FDA48A7C13CE1373FDD686EB0D3F23FB1
+:10AC900073D60B7B3267BD88C717233B4D88776F10
+:10ACA0006CC72F87FA00D12B1BFE401F8C531D68E9
+:10ACB000B6FDB55D7705284FDC5FD614A0F768892F
+:10ACC000605321F507CBAC28ED3FD0D7FADC4755D0
+:10ACD000C44782EF9DF9221F9144FDECA4E5494F42
+:10ACE00075297CAEE63248513EDD1F147E911FE38C
+:10ACF000456329F9CDF56CCFF1FB38A50EFCEB0DC2
+:10AD0000116F5B265841728340227CA18E3CBD9E10
+:10AD10004C5E73591CE85CB3C1515A703DC5A365C4
+:10AD20003AFB2157AED7196ED89267E278387F7C0C
+:10AD3000ED3B07BE8ACE812F6F9E2777D978AA5C1C
+:10AD4000AFF0F95E0CDFC3F7824F9A59CEFCA8F042
+:10AD5000A89E5FBD5EE8192568412CC4E1BF44F898
+:10AD600049D0039B2533F8455F91F1ABE8715EE76D
+:10AD70002F3321B694F0A14B848FECFB2F7BFEBBCD
+:10AD80002D84B757B608BDBA4A75F5471CEF82FC4B
+:10AD9000B9D3D56FE0DAA5B63C6177D6C1CF8222B0
+:10ADA000AF2DF87419BAE381A233F5ABD73EEDE6C7
+:10ADB00095B3BFFF6E7D9EF0878C71D6EFFDAD021F
+:10ADC0007E2824FCD083432BD87F58535A35275DE7
+:10ADD0003F5EEC3A61765DF05C75C019BEB10274FD
+:10ADE000CE3FEA7739EDC6ECFC713FF18F8FE42658
+:10ADF000C0ED19E3E576D424B99A6F398074DB1974
+:10AE00008E47897F060E6F7F87EA24EAEB8A49FE28
+:10AE1000A6AADA40F3D614C7593ED696594075A56E
+:10AE2000FBFBAC1FA6C31D6E8F6D5B4FEF84F471EF
+:10AE30008BE00421E5903DBA7EAE15B773D0E16E8C
+:10AE4000577F7CD06E7F693DF2E12AD29D2B007E38
+:10AE5000695B7752FF7CF5D599F2D41A20BD7FE16A
+:10AE6000F2D411A0FB0D96D9FC4E6BF0670A79580D
+:10AE7000A7E70DBAF23438FF1E88A5C9D5EEF559FB
+:10AE80007A27E2EA9D88C57231E2EA1955B7593E40
+:10AE90007C244F4BD2F44CC4D33316CBA31AF1E429
+:10AEA000C9953F92A720BD0F9E6A263F6500C43B0F
+:10AEB000C66CF9FA7E7BEC61A2C355C5FFD7596118
+:10AEC000CCBCFF340C214F83652EBFCF7F96F9FF9A
+:10AED00024F23F3D16EE0F5666F0BBD7AE9C5620CF
+:10AEE00085A4B86E5AE2F6B3D3F9DCAE9ACEE3D6B7
+:10AEF0009A9ECB6DE37498DBA6E94BB96D9E2EE567
+:10AF0000B6651AF9FE6AE4FFE90A6ED74C2FE676B9
+:10AF1000EDF4226E5BA7AFE6796DD3CBB9BD7EFAB7
+:10AF20005A6E6F986E10FB504DA82827FF5339EBCF
+:10AF300022F0BFE9507D74E0F0EDEF107E7CBAC6E0
+:10AF4000799444B88EEB3D3E35CEFC7FB04CE8F7AB
+:10AF5000B541419F6CFEFFA03DF632F16D36FF8397
+:10AF60004FBCDB52E9DD560DFB396F327F9FE1EFBD
+:10AF7000BEF417CA83A2FF718CE877A1F6FFB45F15
+:10AF80005992E9570E1667FA9503F33DBFD23F4633
+:10AF900075B0AD92C1EFC4F23B621FF2FE606FA1CB
+:10AFA000F1585740277F2A115E130D627FF34E053B
+:10AFB00028DF87FEC56F781EEA07B21BE72BAFBFFD
+:10AFC000B4851C78F397C17139FE29FC93F7E99F8A
+:10AFD0000D67CAFD6CEB3CB9BF1CAAF372D9D9222C
+:10AFE0005FB3907B5DC87DA2CC1EA27C4B224BEE52
+:10AFF0003D3B8A78C890FBFC6E57EE5D392E8A88FF
+:10B00000771F4524F7C857E16EC3ADFF64DA51D509
+:10B010009DEF6B15F5ADE688D0AB6AABD017AA9E55
+:10B020006947916F8ABB73F8138E2AFCE3B6AA7F37
+:10B030003B6DCFC8AE1645C252216EADFF69D2A19D
+:10B040003CD6617501CB77B61C25F415CCE787D5C6
+:10B0500066C825FFE72D4761CF8E586C47B2E77968
+:10B06000F23470B88DF1E2D995C3786F2BCD9EACD8
+:10B07000D5051ED09EACE8CE614F56955B313BC7DF
+:10B08000399BBA855FFADA75B6F017D14F243F25A0
+:10B09000E1CBED0734750BFFA7A8D5FD7D8501F148
+:10B0A000B9A8075B5B53CD54C340796EA2FDAFB323
+:10B0B00026FB4906FB8323113A3FCA6733D1E1429D
+:10B0C000E5B3BA5DF885D03B97FD16AF3D17DF7B42
+:10B0D000FE8EC7FFD9F39EAEB036E4C2CB0FBA45A1
+:10B0E0005C7370E8D90CFED8A32EB8DE3472EA5532
+:10B0F000CBBC287AF5FCFC8AC368E758AFCEEE5784
+:10B100007C25171FCCE6577CAD5BC49BE8576C27AA
+:10B110003AAD5A22FC8A1F74C3C5F5171AEE627C39
+:10B120005DA8BF30D27D767FE140B7E72FC4596F6D
+:10B13000F85DBDF169FD851CFEC1A3CCBF30A550F3
+:10B14000FD0F516D8A7C88D023A8670ED238C6F1D6
+:10B15000EC2F1C0C0A7EB15C3D734797FD04D16354
+:10B160004FBDF0172E961CA0DFF734C13D5F793834
+:10B17000DF79554FAC1C9A243F0742497A37DD4F9F
+:10B18000EF95287E7C2F24DE11E05128EFFF4FCA77
+:10B190009526D9B9D1FC6F3C46F37B1D15E8DDE05F
+:10B1A000FE3E917FDEEDE6FFF6FBE2FF328970EEB8
+:10B1B000DFE1D70FE2F89FE7143832F2D49FF3CAE9
+:10B1C000C7E85DD031570FF96153612EBE9A399FA0
+:10B1D000789F4B4F574EF1EF3ACA74CE93BBF88924
+:10B1E000683638087FE77C99EB233BDBBF7880E447
+:10B1F000C76917792E2EB4E278645E54E43BD08D93
+:10B20000A94FCB8B28A09EA07CFC10BD514FABBF9B
+:10B2100016DB1847A7C51921D3CEE81B100307F783
+:10B22000D91B91393F3FB852C44583C17840CFA163
+:10B230005F76F565BE53CA6E95454F24E92DF183BF
+:10B2400051D5A4F4E870754D1BE53113BA78B4A458
+:10B2500085653B571D3BDC23B9F97893EDB6FAB908
+:10B260008EC25C76C56B87FA449ED6EB07168E5B62
+:10B27000C49F5A8565F3EF75C211C949CB2FFFDE14
+:10B28000D5133B2533B50A91B63324EC44C0485A54
+:10B29000329E77A0F836AE47060C074ED0F78549A8
+:10B2A000F810DB488916CB5977EF11F1CC4E5F8C43
+:10B2B000F7DB59AA729D726745EEBCD75F5DBDACE6
+:10B2C000859B6CCEFF8755AE2767CF9B72F949D31C
+:10B2D000ACA8CEF1F76D06DD2B311F389739D57349
+:10B2E000E7533B82C49F36E747F6BB79126DDE36E3
+:10B2F000C6FBEE7255A73CDC6A65DD0EDAE7415409
+:10B30000BBE49F64F3817F7E4D1ED73FD7C9FC66A7
+:10B31000339B2FE8EDDB04F9696A8AFD251FBCC366
+:10B32000798BDD3547B86FC084DB17FCE2D59B22F3
+:10B330002E3F9E61275C7A2549AE72F0CFFDE51362
+:10B340006CBF1F6898D840759B602460B6E23DF6DC
+:10B350002DB739BFBDBB5666BF35DFFD3DCE83EB94
+:10B360008AC28497DDB547582F679FC777E415F6E3
+:10B370003B826A8AF317C1B28F389E7DC83DC7DA17
+:10B380007A214F05A6D0C3055D71D071DFE2B79475
+:10B390003103FBD2BC971D1FD50F6E126F8B352D5D
+:10B3A000C57E467EFD1A89CEF766A90212C1505E9F
+:10B3B000E0F7BA600BF9F6DE6597746919F17D184C
+:10B3C000D2FA15E27704E9EFA840D978D6F766BD3E
+:10B3D000EFDD7EEC681ABC9E1EF75DAF5B673BD766
+:10B3E000FA3FF76D3B761495FF83356797ABBDAE9B
+:10B3F000DEDBD357CF74F2F8CBE3B7085D71C5EC51
+:10B40000EBF787C773FA25A33D82AFCFA58F0AFC60
+:10B41000E36CE7F75E379E9187FCBAAB1FBEDE2375
+:10B42000E4482F9FE2BCE55EF79DD3DE3CD8F06C8C
+:10B430008E7B3DD6A309793ACDCF9E1FF0CE85F9FC
+:10B4400001F3BB44FC105991477E00E2F3657AE7B3
+:10B45000F6A78866409A3C0F8432FD50CF0FF86DF6
+:10B460008FF0035E2CFE98ED786130C5763C6866FF
+:10B47000E609B2EDB8E68B715CA9956A9E9EE17A09
+:10B4800057F0ED6F3CE5903E48EDE2FA513EF26F29
+:10B490009E488D3BB9E8044B32DFDD7CB107F83CB8
+:10B4A00011233ED148F6A54BE57AC87EF9BD431F6E
+:10B4B00012BA9271B05DB8C3CCB7BB27F8FD8ECB82
+:10B4C000F7E7A227FD7D52E7FE6E85DE715CFB6625
+:10B4D0007DAEB8C36BE97D55E67BF84F2717CF7B70
+:10B4E00072910779422ED6C903E40FAC93F9DD0AB5
+:10B4F0003DEF55EBDC9423D5FDE964746F7A1F248E
+:10B50000B9F5A40533F2029F17EF5E4E6E13EF6894
+:10B51000F877860BE877A193FCFBC1CBE895AB32BB
+:10B52000A3DF4E42994CF562E788249DF6932EA541
+:10B53000278FA64CEB1682CD6DF6B92F87387FAFDB
+:10B540008624B757C238B74B6082DB6530C5AD057E
+:10B55000426F994745DD6305980A7DAF019BDB3A51
+:10B5600088735B0F496EBF79ED97FE70332EF9AF8C
+:10B570001EB72E7F1A2F02AF39E43B458FFEBDFB6D
+:10B580007B787EB0C760B93B17BD07C242DF369BF0
+:10B5900013ECDF878236EB615F44F0B707C7374BA8
+:10B5A000BEF8EFF5A3B27F67F2FF2B2134C6D03F80
+:10B5B0000000000000000000000000180000000073
+:10B5C000000000000000004000000000000000003B
+:10B5D0000000002800000000000000000000001033
+:10B5E000000000000000000000000020000000003B
+:10B5F000000000000000001000000000000000003B
+:10B600000000000800000000000000000000000032
+:10B6100000000000000000000000003900000000F1
+:10B6200000000000000000380000000000000000E2
+:10B630000000000000000000000000000000000802
+:10B6400000000000000000000000000000000000FA
+:10B65000000000000000000C0000000000000000DE
+:10B660000000000E000000000000000000000004C8
+:10B6700000000000000000000000001800000000B2
+:10B68000000000000000001C00000000000000009E
+:10B690000000001C0000000000000000000000137B
+:10B6A00000000000000000000000003A0000000060
+:10B6B0000000000000000001000000000000000089
+:10B6C0000000000200000000000000000000000177
+:10B6D000000000000000000000000010000000005A
+:10B6E000000000000000005000000000000000000A
+:10B6F0000000000000000000000000000000000347
+:10B700000000000000000000000000AB000000008E
+:10B710000000000000000008000000000000000021
+:10B720000000C00000100000000000080000C00879
+:10B7300000100000000000020000C0000010000027
+:10B740000000001000009FB0000000000000000892
+:10B750000000C08000100000000000040000C0884D
+:10B7600000100000000000020000C0800010000077
+:10B770000000001000009120000000000000000800
+:10B780000000934000010004000000010000934805
+:10B7900000000000000000020000935000000000C4
+:10B7A00000000008000093540000000000000002A8
+:10B7B00000009418000000000000000800009358EA
+:10B7C000000800000000000800009AB000400000DF
+:10B7D00000000040000093980008000000000008EE
+:10B7E000000093D80008000000000008000094202A
+:10B7F00000C8000000000098000095B0009800000C
+:10B8000000000028000095F00098000000000028CB
+:10B810000000C480054000300000054000009D206D
+:10B82000000800000000000100009D210008000049
+:10B8300000000001000020080010000000000010BF
+:10B8400000002000000000000000000800009CD85C
+:10B85000000800000000000200009D180000000029
+:10B8600000000001000000010000000000000000D6
+:10B8700000000009000000000000000000000002BD
+:10B8800000000000000000000000CF2000000000C9
+:10B89000000000200000CF46000000000000000172
+:10B8A0000000600000200000000000200000730085
+:10B8B000000800000000000800009FA00000000039
+:10B8C0000000000100009FA800000000000000012F
+:10B8D00000009F60000000000000001000009F6357
+:10B8E000000000000000000100009F610000000057
+:10B8F0000000000100009F66000000000000000141
+:10B9000000009F67000000000000000000009F682A
+:10B91000000000000000000400009F6C0000000018
+:10B9200000000004000000520000000000000000C1
+:10B930000000000300000000000000000000000301
+:10B9400000000000000000000000000500000000F2
+:10B9500000000000000000020000000000000000E5
+:10B9600000060000000000000000002000009F70A2
+:10B97000000000000000000100009F900000000097
+:10B98000000000080000005300000000000000005C
+:10B9900000009F98000000000000000200009F9C33
+:10B9A000000000000000000100009F9D000000005A
+:10B9B000000000010000000900000000000000007D
+:10B9C0000000000100000000000000000000004432
+:10B9D0000000000000000000000000010000000066
+:10B9E0000000000000000050000000000000000007
+:10B9F000000000890000000000000000000012C8E4
+:10BA00000080000000000080000000010000000035
+:10BA1000000000000000A000071000000000071058
+:10BA200000001AC800000000000000080000AEC0BE
+:10BA300000080000000000080000AE400008000000
+:10BA4000000000080000AE800008000000000008B0
+:10BA5000000020080010000000000010000020007E
+:10BA600000000000000000080000A01007100040C7
+:10BA70000000004000001BF800080000000000016A
+:10BA800000001BF9000800000000000100001AD0AF
+:10BA9000000000000000000100001AD800000000B3
+:10BAA0000000000200001ADA00000000000000029E
+:10BAB0008000000000000000000000000000AF0057
+:10BAC000000000000000002000001B78002800009B
+:10BAD000000000040000E000002000000000002042
+:10BAE0000000F300000800000000000800001AF049
+:10BAF000000000000000010800001B3700000000EB
+:10BB00000000000100001B0F000000000000000109
+:10BB100000001B70000000000000000400001B7407
+:10BB200000000000000000040000005000000000C1
+:10BB30000000000000000003000000000000000002
+:10BB400000000005000000000000000000000006EA
+:10BB500000000000000000000000000700000000DE
+:10BB60000000000000001BC80000000000000001F1
+:10BB700000001BE800000000000000080000005169
+:10BB8000000000000000000000001BD000000000CA
+:10BB90000000000400001BD40000000000000004AE
+:10BBA00000001BD8000000000000000400001BDCA7
+:10BBB00000000000000000080000B00000180000B5
+:10BBC000000000180000C00000400000000000401D
+:10BBD0000000C00000400002000000010000C001A1
+:10BBE00000400002000000000000E2000020000011
+:10BBF000000000200000E204000200080020000213
+:10BC00008000000000000000000000000000E200D2
+:10BC100000080020000000040000F40000280000DC
+:10BC2000000000280000F540001000000000001097
+:10BC30000000F5C000200000000000200000F5C05A
+:10BC400000020020000000020000F30000200000BD
+:10BC5000000000200000200800100000000000107C
+:10BC60000000200000000000000000080000110893
+:10BC70000008000000000008000011680008000033
+:10BC800000000008000011A80008000000000008E3
+:10BC900000001240000800000000000100001241F6
+:10BCA0000008000000000001000040000020000427
+:10BCB00000000010000059000030001800000010C3
+:10BCC0000000590800300018000000020000570072
+:10BCD00000080000000000010000570100080000FB
+:10BCE00000000001000011E8000000000000000159
+:10BCF000000011F00000000000000001000011F839
+:10BD000000000000000000100000124400080000C5
+:10BD1000000000040000400000200000000000209F
+:10BD20000000530000100000000000100000153853
+:10BD300000000000000000010000000300000000FF
+:10BD400000000000000000000000000000000000F3
+:10BD500000000001000000000000000000000004DE
+:10BD600000000000000000000000150800000000B6
+:10BD7000000000010000152800000000000000087D
+:10BD800000000050000000000000000000008308D8
+:10BD900000800000000000800000000100000000A2
+:10BDA000000000000000200800100000000000104B
+:10BDB00000002000000000000000000800008410C7
+:10BDC0000008000000000008000084700008000067
+:10BDD0000000000800060000046000280000046065
+:10BDE00000008520000800000000000100008521FF
+:10BDF00000080000000000018000000000000000BA
+:10BE000000000000000084080000000000000001A5
+:10BE1000000084F40008000000000002000084F626
+:10BE2000000800000000000200008504001000006F
+:10BE300000000004000087600000000000000020F7
+:10BE400000006000002000000000002000007300DF
+:10BE500000080000000000080000000300000000CF
+:10BE600000000000000000050000000000000000CD
+:10BE700000000006000000000000000000000007B5
+:10BE80000000000000000000000088080000000022
+:10BE900000000001000088280000000000000008E9
+:10BEA00000000050000000000000000000008810AA
+:10BEB00000000000000000040000881400000000E2
+:10BEC00000000004000088180000000000000004CA
+:10BED0000000881C00000000000000080000300086
+:10BEE0000040000000000008000030080040000092
+:10BEF000000000280000339001C00010000000087E
+:10BF00000000320000200000000000200000372068
+:10BF1000000000000000000800001020062000388B
+:10BF2000000000080000A000000000000000200049
+:10BF300000003EA9000000000000000100003EC813
+:10BF4000000000000000000280000000000000006F
+:10BF50000000000000006000002000000000000859
+:10BF60000000400000080000000000010000400147
+:10BF7000000800000000000100004040000800042C
+:10BF800000000002000040600008000400000004FF
+:10BF90000000400000080000000000040000400411
+:10BFA0000008000000000004000040400000000005
+:10BFB00000000008000040480000000000000008E9
+:10BFC0000000800000000000000000100000504051
+:10BFD000000100040000000100005000000000000B
+:10BFE00000000020000050080010000000000004C5
+:10BFF0000000500C0010000000000001000052C7BB
+:10C000000000000000000001000052C60000000017
+:10C0100000000001000030000030001800000004A3
+:10C020000000300400300018000000040000300858
+:10C0300000300018000000020000300A0030001834
+:10C04000000000020000300C003000180000000169
+:10C050000000300D00300018000000010000300E1C
+:10C0600000300018000000010000301000300018FF
+:10C07000000000040000301400300018000000042C
+:10C08000000050000100008000080004000050047F
+:10C0900001000080000800040000000A0000000009
+:10C0A0000000000000005068010000800000000156
+:10C0B0000000506901000080000000010000506C89
+:10C0C00001000080000000020000506E01000080AE
+:10C0D0000000000200005070010000800000000419
+:10C0E0000000507401000080000000040000506651
+:10C0F0000100008000000002000050640100008088
+:10C1000000000001000050600100008000000002FB
+:10C11000000050620100008000000002000050504A
+:10C120000100008000000004000050540100008065
+:10C1300000000004000050580100008000000004CE
+:10C140000000505C01000080000000040000507CF2
+:10C1500001000080000000010000507D010000800F
+:10C160000000000100004018001000000000000462
+:10C170000000409000100000000000040000409803
+:10C18000001000000000000400004110000000004A
+:10C190000000000200004112000000000000000248
+:10C1A00000004114000000000000000200004116E1
+:10C1B00000000000000000020000604000080000D5
+:10C1C00000000002000060420008000000000002C1
+:10C1D00000006044000800000000000400006080CF
+:10C1E0000008000000000008000060C000400008D7
+:10C1F00000000008000060000008000000000002CD
+:10C20000000060020008000000000001000060045F
+:10C210000008000000000002000063400008000069
+:10C220000000000800006380000800000000000417
+:10C23000000063840008000000000001000063C0EB
+:10C240000008000000000002000063C400080000B5
+:10C25000000000020000640000080000000000046C
+:10C2600000007000001000000000000400007004D6
+:10C270000010000000000004000070080010000022
+:10C280000000000400009000000800000000000210
+:10C29000000090020008000000000001000090046F
+:10C2A00000080000000000020000904000080000AC
+:10C2B000000000020000904400080000000000029E
+:10C2C00000009046000800000000000200009648B0
+:10C2D0000008000000000008000090800008000036
+:10C2E000000000020000908400080000000000022E
+:10C2F0000000968800080000000000080000804050
+:10C30000000800000000000100008041000800005B
+:10C310000000000100008042000800000000000151
+:10C3200000008043000800000000000100008000C1
+:10C330000008000000000002000080020008000069
+:10C34000000000010000800400080000000000025E
+:10C35000000080C00008000000000002000080C251
+:10C360000008000000000002000080C40008000077
+:10C3700000000002000080800008000000000001B2
+:10C3800000008081000800000000000100008082A1
+:10C390000008000000000001000080830008000089
+:10C3A000000000010000808400080000000000017F
+:10C3B0000000808500080000000000010000808669
+:10C3C00000080000000000010000600000080000FC
+:10C3D00000000002000060020008000000000001F0
+:10C3E000000060040008000000000002000060423D
+:10C3F00000C00018000000020000604000C00018EB
+:10C40000000000020000604C00C00018000000089E
+:10C410000000604400C000180000000800006057E1
+:10C4200000C00018000000010000605400C00018A7
+:10C43000000000020000605600C00018000000016B
+:10C440000000664000080000000000080000668050
+:10C450000008000000000008000066C0000800009E
+:10C46000000000080000DA4200180000000000028E
+:10C470000000DE4000000000000000000000E000BE
+:10C4800000000000000000040000D0C00000000018
+:10C49000000000040000D0C4000000000000000400
+:10C4A0000000D0C800000000000000040000D0CC54
+:10C4B00000000000000000040000D0D000000000D8
+:10C4C000000000040000D0D40000000000000004C0
+:10C4D0000000D0D800000000000000040000D0C020
+:10C4E00000000000000000200000DB000000000051
+:10C4F000000000040000DB000000000000000068F5
+:10C500000000B94800000000000000000000D0005A
+:10C5100000000000000000040000B0C000000000A7
+:10C52000000000040000B0C400000000000000048F
+:10C530000000B0C800000000000000040000B0C00F
+:10C5400000000000000000100000D6B00000000055
+:10C55000000000040000D6B4000000000000000449
+:10C560000000D6B800000000000000040000D6BCA7
+:10C5700000000000000000040000D6B00000000031
+:10C58000000000100000D348000000000000000878
+:10C590000000D358000000000000008000000010E0
+:10C5A00000000000000000000000D3580000000060
+:10C5B0000000000800000000060205000000000066
+:00000001FF
diff --git a/fs/9p/acl.c b/fs/9p/acl.c
index 12d602351db..6e58c4ca1e6 100644
--- a/fs/9p/acl.c
+++ b/fs/9p/acl.c
@@ -91,11 +91,14 @@ static struct posix_acl *v9fs_get_cached_acl(struct inode *inode, int type)
 	return acl;
 }
 
-int v9fs_check_acl(struct inode *inode, int mask)
+int v9fs_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
 	struct posix_acl *acl;
 	struct v9fs_session_info *v9ses;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	v9ses = v9fs_inode2v9ses(inode);
 	if ((v9ses->flags & V9FS_ACCESS_MASK) != V9FS_ACCESS_CLIENT) {
 		/*
diff --git a/fs/9p/acl.h b/fs/9p/acl.h
index 59e18c2e8c7..7ef3ac9f6d9 100644
--- a/fs/9p/acl.h
+++ b/fs/9p/acl.h
@@ -16,7 +16,7 @@
 
 #ifdef CONFIG_9P_FS_POSIX_ACL
 extern int v9fs_get_acl(struct inode *, struct p9_fid *);
-extern int v9fs_check_acl(struct inode *inode, int mask);
+extern int v9fs_check_acl(struct inode *inode, int mask, unsigned int flags);
 extern int v9fs_acl_chmod(struct dentry *);
 extern int v9fs_set_create_acl(struct dentry *,
 			       struct posix_acl *, struct posix_acl *);
diff --git a/fs/9p/vfs_dentry.c b/fs/9p/vfs_dentry.c
index cbf4e50f393..466d2a4fc5c 100644
--- a/fs/9p/vfs_dentry.c
+++ b/fs/9p/vfs_dentry.c
@@ -51,7 +51,7 @@
  *
  */
 
-static int v9fs_dentry_delete(struct dentry *dentry)
+static int v9fs_dentry_delete(const struct dentry *dentry)
 {
 	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
 									dentry);
@@ -68,7 +68,7 @@ static int v9fs_dentry_delete(struct dentry *dentry)
  *
  */
 
-static int v9fs_cached_dentry_delete(struct dentry *dentry)
+static int v9fs_cached_dentry_delete(const struct dentry *dentry)
 {
 	struct inode *inode = dentry->d_inode;
 	P9_DPRINTK(P9_DEBUG_VFS, " dentry: %s (%p)\n", dentry->d_name.name,
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 34bf71b5654..59782981b22 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -237,10 +237,17 @@ struct inode *v9fs_alloc_inode(struct super_block *sb)
  *
  */
 
-void v9fs_destroy_inode(struct inode *inode)
+static void v9fs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(vcookie_cache, v9fs_inode2cookie(inode));
 }
+
+void v9fs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, v9fs_i_callback);
+}
 #endif
 
 /**
@@ -270,11 +277,11 @@ static struct dentry *v9fs_dentry_from_dir_inode(struct inode *inode)
 {
 	struct dentry *dentry;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&inode->i_lock);
 	/* Directory should have only one entry. */
 	BUG_ON(S_ISDIR(inode->i_mode) && !list_is_singular(&inode->i_dentry));
 	dentry = list_entry(inode->i_dentry.next, struct dentry, d_alias);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&inode->i_lock);
 	return dentry;
 }
 
@@ -628,9 +635,9 @@ v9fs_create(struct v9fs_session_info *v9ses, struct inode *dir,
 	}
 
 	if (v9ses->cache)
-		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_set_d_op(dentry, &v9fs_cached_dentry_operations);
 	else
-		dentry->d_op = &v9fs_dentry_operations;
+		d_set_d_op(dentry, &v9fs_dentry_operations);
 
 	d_instantiate(dentry, inode);
 	err = v9fs_fid_add(dentry, fid);
@@ -742,7 +749,7 @@ v9fs_vfs_create_dotl(struct inode *dir, struct dentry *dentry, int omode,
 				err);
 			goto error;
 		}
-		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_set_d_op(dentry, &v9fs_cached_dentry_operations);
 		d_instantiate(dentry, inode);
 		err = v9fs_fid_add(dentry, fid);
 		if (err < 0)
@@ -760,7 +767,7 @@ v9fs_vfs_create_dotl(struct inode *dir, struct dentry *dentry, int omode,
 			err = PTR_ERR(inode);
 			goto error;
 		}
-		dentry->d_op = &v9fs_dentry_operations;
+		d_set_d_op(dentry, &v9fs_dentry_operations);
 		d_instantiate(dentry, inode);
 	}
 	/* Now set the ACL based on the default value */
@@ -949,7 +956,7 @@ static int v9fs_vfs_mkdir_dotl(struct inode *dir,
 				err);
 			goto error;
 		}
-		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_set_d_op(dentry, &v9fs_cached_dentry_operations);
 		d_instantiate(dentry, inode);
 		err = v9fs_fid_add(dentry, fid);
 		if (err < 0)
@@ -966,7 +973,7 @@ static int v9fs_vfs_mkdir_dotl(struct inode *dir,
 			err = PTR_ERR(inode);
 			goto error;
 		}
-		dentry->d_op = &v9fs_dentry_operations;
+		d_set_d_op(dentry, &v9fs_dentry_operations);
 		d_instantiate(dentry, inode);
 	}
 	/* Now set the ACL based on the default value */
@@ -1034,9 +1041,9 @@ static struct dentry *v9fs_vfs_lookup(struct inode *dir, struct dentry *dentry,
 
 inst_out:
 	if (v9ses->cache)
-		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_set_d_op(dentry, &v9fs_cached_dentry_operations);
 	else
-		dentry->d_op = &v9fs_dentry_operations;
+		d_set_d_op(dentry, &v9fs_dentry_operations);
 
 	d_add(dentry, inode);
 	return NULL;
@@ -1702,7 +1709,7 @@ v9fs_vfs_symlink_dotl(struct inode *dir, struct dentry *dentry,
 					err);
 			goto error;
 		}
-		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_set_d_op(dentry, &v9fs_cached_dentry_operations);
 		d_instantiate(dentry, inode);
 		err = v9fs_fid_add(dentry, fid);
 		if (err < 0)
@@ -1715,7 +1722,7 @@ v9fs_vfs_symlink_dotl(struct inode *dir, struct dentry *dentry,
 			err = PTR_ERR(inode);
 			goto error;
 		}
-		dentry->d_op = &v9fs_dentry_operations;
+		d_set_d_op(dentry, &v9fs_dentry_operations);
 		d_instantiate(dentry, inode);
 	}
 
@@ -1849,7 +1856,7 @@ v9fs_vfs_link_dotl(struct dentry *old_dentry, struct inode *dir,
 		ihold(old_dentry->d_inode);
 	}
 
-	dentry->d_op = old_dentry->d_op;
+	d_set_d_op(dentry, old_dentry->d_op);
 	d_instantiate(dentry, old_dentry->d_inode);
 
 	return err;
@@ -1973,7 +1980,7 @@ v9fs_vfs_mknod_dotl(struct inode *dir, struct dentry *dentry, int omode,
 				err);
 			goto error;
 		}
-		dentry->d_op = &v9fs_cached_dentry_operations;
+		d_set_d_op(dentry, &v9fs_cached_dentry_operations);
 		d_instantiate(dentry, inode);
 		err = v9fs_fid_add(dentry, fid);
 		if (err < 0)
@@ -1989,7 +1996,7 @@ v9fs_vfs_mknod_dotl(struct inode *dir, struct dentry *dentry, int omode,
 			err = PTR_ERR(inode);
 			goto error;
 		}
-		dentry->d_op = &v9fs_dentry_operations;
+		d_set_d_op(dentry, &v9fs_dentry_operations);
 		d_instantiate(dentry, inode);
 	}
 	/* Now set the ACL based on the default value */
diff --git a/fs/adfs/dir.c b/fs/adfs/dir.c
index f4287e4de74..bf7693c384f 100644
--- a/fs/adfs/dir.c
+++ b/fs/adfs/dir.c
@@ -201,7 +201,8 @@ const struct file_operations adfs_dir_operations = {
 };
 
 static int
-adfs_hash(struct dentry *parent, struct qstr *qstr)
+adfs_hash(const struct dentry *parent, const struct inode *inode,
+		struct qstr *qstr)
 {
 	const unsigned int name_len = ADFS_SB(parent->d_sb)->s_namelen;
 	const unsigned char *name;
@@ -237,17 +238,19 @@ adfs_hash(struct dentry *parent, struct qstr *qstr)
  * requirements of the underlying filesystem.
  */
 static int
-adfs_compare(struct dentry *parent, struct qstr *entry, struct qstr *name)
+adfs_compare(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
 	int i;
 
-	if (entry->len != name->len)
+	if (len != name->len)
 		return 1;
 
 	for (i = 0; i < name->len; i++) {
 		char a, b;
 
-		a = entry->name[i];
+		a = str[i];
 		b = name->name[i];
 
 		if (a >= 'A' && a <= 'Z')
@@ -273,7 +276,7 @@ adfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
 	struct object_info obj;
 	int error;
 
-	dentry->d_op = &adfs_dentry_operations;	
+	d_set_d_op(dentry, &adfs_dentry_operations);
 	lock_kernel();
 	error = adfs_dir_lookup_byname(dir, &dentry->d_name, &obj);
 	if (error == 0) {
diff --git a/fs/adfs/super.c b/fs/adfs/super.c
index 959dbff2d42..a4041b52fbc 100644
--- a/fs/adfs/super.c
+++ b/fs/adfs/super.c
@@ -240,11 +240,18 @@ static struct inode *adfs_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void adfs_destroy_inode(struct inode *inode)
+static void adfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(adfs_inode_cachep, ADFS_I(inode));
 }
 
+static void adfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, adfs_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct adfs_inode_info *ei = (struct adfs_inode_info *) foo;
@@ -477,7 +484,7 @@ static int adfs_fill_super(struct super_block *sb, void *data, int silent)
 		adfs_error(sb, "get root inode failed\n");
 		goto error;
 	} else
-		sb->s_root->d_op = &adfs_dentry_operations;
+		d_set_d_op(sb->s_root, &adfs_dentry_operations);
 	unlock_kernel();
 	return 0;
 
diff --git a/fs/affs/amigaffs.c b/fs/affs/amigaffs.c
index 7d0f0a30f7a..3a4557e8325 100644
--- a/fs/affs/amigaffs.c
+++ b/fs/affs/amigaffs.c
@@ -128,7 +128,7 @@ affs_fix_dcache(struct dentry *dentry, u32 entry_ino)
 	void *data = dentry->d_fsdata;
 	struct list_head *head, *next;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&inode->i_lock);
 	head = &inode->i_dentry;
 	next = head->next;
 	while (next != head) {
@@ -139,7 +139,7 @@ affs_fix_dcache(struct dentry *dentry, u32 entry_ino)
 		}
 		next = next->next;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&inode->i_lock);
 }
 
 
diff --git a/fs/affs/namei.c b/fs/affs/namei.c
index 914d1c0bc07..944a4042fb6 100644
--- a/fs/affs/namei.c
+++ b/fs/affs/namei.c
@@ -13,11 +13,19 @@
 typedef int (*toupper_t)(int);
 
 static int	 affs_toupper(int ch);
-static int	 affs_hash_dentry(struct dentry *, struct qstr *);
-static int       affs_compare_dentry(struct dentry *, struct qstr *, struct qstr *);
+static int	 affs_hash_dentry(const struct dentry *,
+		const struct inode *, struct qstr *);
+static int       affs_compare_dentry(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name);
 static int	 affs_intl_toupper(int ch);
-static int	 affs_intl_hash_dentry(struct dentry *, struct qstr *);
-static int       affs_intl_compare_dentry(struct dentry *, struct qstr *, struct qstr *);
+static int	 affs_intl_hash_dentry(const struct dentry *,
+		const struct inode *, struct qstr *);
+static int       affs_intl_compare_dentry(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name);
 
 const struct dentry_operations affs_dentry_operations = {
 	.d_hash		= affs_hash_dentry,
@@ -58,13 +66,13 @@ affs_get_toupper(struct super_block *sb)
  * Note: the dentry argument is the parent dentry.
  */
 static inline int
-__affs_hash_dentry(struct dentry *dentry, struct qstr *qstr, toupper_t toupper)
+__affs_hash_dentry(struct qstr *qstr, toupper_t toupper)
 {
 	const u8 *name = qstr->name;
 	unsigned long hash;
 	int i;
 
-	i = affs_check_name(qstr->name,qstr->len);
+	i = affs_check_name(qstr->name, qstr->len);
 	if (i)
 		return i;
 
@@ -78,39 +86,41 @@ __affs_hash_dentry(struct dentry *dentry, struct qstr *qstr, toupper_t toupper)
 }
 
 static int
-affs_hash_dentry(struct dentry *dentry, struct qstr *qstr)
+affs_hash_dentry(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *qstr)
 {
-	return __affs_hash_dentry(dentry, qstr, affs_toupper);
+	return __affs_hash_dentry(qstr, affs_toupper);
 }
 static int
-affs_intl_hash_dentry(struct dentry *dentry, struct qstr *qstr)
+affs_intl_hash_dentry(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *qstr)
 {
-	return __affs_hash_dentry(dentry, qstr, affs_intl_toupper);
+	return __affs_hash_dentry(qstr, affs_intl_toupper);
 }
 
-static inline int
-__affs_compare_dentry(struct dentry *dentry, struct qstr *a, struct qstr *b, toupper_t toupper)
+static inline int __affs_compare_dentry(unsigned int len,
+		const char *str, const struct qstr *name, toupper_t toupper)
 {
-	const u8 *aname = a->name;
-	const u8 *bname = b->name;
-	int len;
+	const u8 *aname = str;
+	const u8 *bname = name->name;
 
-	/* 'a' is the qstr of an already existing dentry, so the name
-	 * must be valid. 'b' must be validated first.
+	/*
+	 * 'str' is the name of an already existing dentry, so the name
+	 * must be valid. 'name' must be validated first.
 	 */
 
-	if (affs_check_name(b->name,b->len))
+	if (affs_check_name(name->name, name->len))
 		return 1;
 
-	/* If the names are longer than the allowed 30 chars,
+	/*
+	 * If the names are longer than the allowed 30 chars,
 	 * the excess is ignored, so their length may differ.
 	 */
-	len = a->len;
 	if (len >= 30) {
-		if (b->len < 30)
+		if (name->len < 30)
 			return 1;
 		len = 30;
-	} else if (len != b->len)
+	} else if (len != name->len)
 		return 1;
 
 	for (; len > 0; len--)
@@ -121,14 +131,18 @@ __affs_compare_dentry(struct dentry *dentry, struct qstr *a, struct qstr *b, tou
 }
 
 static int
-affs_compare_dentry(struct dentry *dentry, struct qstr *a, struct qstr *b)
+affs_compare_dentry(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	return __affs_compare_dentry(dentry, a, b, affs_toupper);
+	return __affs_compare_dentry(len, str, name, affs_toupper);
 }
 static int
-affs_intl_compare_dentry(struct dentry *dentry, struct qstr *a, struct qstr *b)
+affs_intl_compare_dentry(const struct dentry *parent,const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	return __affs_compare_dentry(dentry, a, b, affs_intl_toupper);
+	return __affs_compare_dentry(len, str, name, affs_intl_toupper);
 }
 
 /*
@@ -226,7 +240,7 @@ affs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd)
 		if (IS_ERR(inode))
 			return ERR_CAST(inode);
 	}
-	dentry->d_op = AFFS_SB(sb)->s_flags & SF_INTL ? &affs_intl_dentry_operations : &affs_dentry_operations;
+	d_set_d_op(dentry, AFFS_SB(sb)->s_flags & SF_INTL ? &affs_intl_dentry_operations : &affs_dentry_operations);
 	d_add(dentry, inode);
 	return NULL;
 }
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 0cf7f4384cb..d39081bbe7c 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -95,11 +95,18 @@ static struct inode *affs_alloc_inode(struct super_block *sb)
 	return &i->vfs_inode;
 }
 
-static void affs_destroy_inode(struct inode *inode)
+static void affs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(affs_inode_cachep, AFFS_I(inode));
 }
 
+static void affs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, affs_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct affs_inode_info *ei = (struct affs_inode_info *) foo;
@@ -475,7 +482,7 @@ got_root:
 		printk(KERN_ERR "AFFS: Get root inode failed\n");
 		goto out_error;
 	}
-	sb->s_root->d_op = &affs_dentry_operations;
+	d_set_d_op(sb->s_root, &affs_dentry_operations);
 
 	pr_debug("AFFS: s_flags=%lX\n",sb->s_flags);
 	return 0;
diff --git a/fs/afs/dir.c b/fs/afs/dir.c
index 5439e1bc9a8..34a3263d60a 100644
--- a/fs/afs/dir.c
+++ b/fs/afs/dir.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/fs.h>
+#include <linux/namei.h>
 #include <linux/pagemap.h>
 #include <linux/ctype.h>
 #include <linux/sched.h>
@@ -23,7 +24,7 @@ static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry,
 static int afs_dir_open(struct inode *inode, struct file *file);
 static int afs_readdir(struct file *file, void *dirent, filldir_t filldir);
 static int afs_d_revalidate(struct dentry *dentry, struct nameidata *nd);
-static int afs_d_delete(struct dentry *dentry);
+static int afs_d_delete(const struct dentry *dentry);
 static void afs_d_release(struct dentry *dentry);
 static int afs_lookup_filldir(void *_cookie, const char *name, int nlen,
 				  loff_t fpos, u64 ino, unsigned dtype);
@@ -581,7 +582,7 @@ static struct dentry *afs_lookup(struct inode *dir, struct dentry *dentry,
 	}
 
 success:
-	dentry->d_op = &afs_fs_dentry_operations;
+	d_set_d_op(dentry, &afs_fs_dentry_operations);
 
 	d_add(dentry, inode);
 	_leave(" = 0 { vn=%u u=%u } -> { ino=%lu v=%llu }",
@@ -607,6 +608,9 @@ static int afs_d_revalidate(struct dentry *dentry, struct nameidata *nd)
 	void *dir_version;
 	int ret;
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
 	vnode = AFS_FS_I(dentry->d_inode);
 
 	if (dentry->d_inode)
@@ -730,7 +734,7 @@ out_bad:
  * - called from dput() when d_count is going to 0.
  * - return 1 to request dentry be unhashed, 0 otherwise
  */
-static int afs_d_delete(struct dentry *dentry)
+static int afs_d_delete(const struct dentry *dentry)
 {
 	_enter("%s", dentry->d_name.name);
 
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index cca8eef736f..6d4bc1c8ff6 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -624,7 +624,7 @@ extern void afs_clear_permits(struct afs_vnode *);
 extern void afs_cache_permit(struct afs_vnode *, struct key *, long);
 extern void afs_zap_permits(struct rcu_head *);
 extern struct key *afs_request_key(struct afs_cell *);
-extern int afs_permission(struct inode *, int);
+extern int afs_permission(struct inode *, int, unsigned int);
 
 /*
  * server.c
diff --git a/fs/afs/security.c b/fs/afs/security.c
index bb4ed144d0e..f44b9d35537 100644
--- a/fs/afs/security.c
+++ b/fs/afs/security.c
@@ -285,13 +285,16 @@ static int afs_check_permit(struct afs_vnode *vnode, struct key *key,
  * - AFS ACLs are attached to directories only, and a file is controlled by its
  *   parent directory's ACL
  */
-int afs_permission(struct inode *inode, int mask)
+int afs_permission(struct inode *inode, int mask, unsigned int flags)
 {
 	struct afs_vnode *vnode = AFS_FS_I(inode);
 	afs_access_t uninitialized_var(access);
 	struct key *key;
 	int ret;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	_enter("{{%x:%u},%lx},%x,",
 	       vnode->fid.vid, vnode->fid.vnode, vnode->flags, mask);
 
@@ -347,7 +350,7 @@ int afs_permission(struct inode *inode, int mask)
 	}
 
 	key_put(key);
-	ret = generic_permission(inode, mask, NULL);
+	ret = generic_permission(inode, mask, flags, NULL);
 	_leave(" = %d", ret);
 	return ret;
 
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 27201cffece..f901a9d7c11 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -498,6 +498,14 @@ static struct inode *afs_alloc_inode(struct super_block *sb)
 	return &vnode->vfs_inode;
 }
 
+static void afs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	struct afs_vnode *vnode = AFS_FS_I(inode);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(afs_inode_cachep, vnode);
+}
+
 /*
  * destroy an AFS inode struct
  */
@@ -511,7 +519,7 @@ static void afs_destroy_inode(struct inode *inode)
 
 	ASSERTCMP(vnode->server, ==, NULL);
 
-	kmem_cache_free(afs_inode_cachep, vnode);
+	call_rcu(&inode->i_rcu, afs_i_callback);
 	atomic_dec(&afs_count_active_inodes);
 }
 
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index 57ce55b2564..5fd38112a6c 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -102,7 +102,7 @@ struct file *anon_inode_getfile(const char *name,
 	this.name = name;
 	this.len = strlen(name);
 	this.hash = 0;
-	path.dentry = d_alloc(anon_inode_mnt->mnt_sb->s_root, &this);
+	path.dentry = d_alloc_pseudo(anon_inode_mnt->mnt_sb, &this);
 	if (!path.dentry)
 		goto err_module;
 
@@ -113,7 +113,7 @@ struct file *anon_inode_getfile(const char *name,
 	 */
 	ihold(anon_inode_inode);
 
-	path.dentry->d_op = &anon_inodefs_dentry_operations;
+	d_set_d_op(path.dentry, &anon_inodefs_dentry_operations);
 	d_instantiate(path.dentry, anon_inode_inode);
 
 	error = -ENFILE;
@@ -232,7 +232,7 @@ static int __init anon_inode_init(void)
 	return 0;
 
 err_mntput:
-	mntput(anon_inode_mnt);
+	mntput_long(anon_inode_mnt);
 err_unregister_filesystem:
 	unregister_filesystem(&anon_inode_fs_type);
 err_exit:
diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h
index 3d283abf67d..0fffe1c24ce 100644
--- a/fs/autofs4/autofs_i.h
+++ b/fs/autofs4/autofs_i.h
@@ -16,6 +16,7 @@
 #include <linux/auto_fs4.h>
 #include <linux/auto_dev-ioctl.h>
 #include <linux/mutex.h>
+#include <linux/spinlock.h>
 #include <linux/list.h>
 
 /* This is the range of ioctl() numbers we claim as ours */
@@ -60,6 +61,8 @@ do {							\
 		current->pid, __func__, ##args);	\
 } while (0)
 
+extern spinlock_t autofs4_lock;
+
 /* Unified info structure.  This is pointed to by both the dentry and
    inode structures.  Each file in the filesystem has an instance of this
    structure.  It holds a reference to the dentry, so dentries are never
@@ -254,17 +257,15 @@ static inline int simple_positive(struct dentry *dentry)
 	return dentry->d_inode && !d_unhashed(dentry);
 }
 
-static inline int __simple_empty(struct dentry *dentry)
+static inline void __autofs4_add_expiring(struct dentry *dentry)
 {
-	struct dentry *child;
-	int ret = 0;
-
-	list_for_each_entry(child, &dentry->d_subdirs, d_u.d_child)
-		if (simple_positive(child))
-			goto out;
-	ret = 1;
-out:
-	return ret;
+	struct autofs_sb_info *sbi = autofs4_sbi(dentry->d_sb);
+	struct autofs_info *ino = autofs4_dentry_ino(dentry);
+	if (ino) {
+		if (list_empty(&ino->expiring))
+			list_add(&ino->expiring, &sbi->expiring_list);
+	}
+	return;
 }
 
 static inline void autofs4_add_expiring(struct dentry *dentry)
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index a796c9417fb..cc1d0136590 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -91,24 +91,64 @@ done:
 }
 
 /*
- * Calculate next entry in top down tree traversal.
- * From next_mnt in namespace.c - elegant.
+ * Calculate and dget next entry in top down tree traversal.
  */
-static struct dentry *next_dentry(struct dentry *p, struct dentry *root)
+static struct dentry *get_next_positive_dentry(struct dentry *prev,
+						struct dentry *root)
 {
-	struct list_head *next = p->d_subdirs.next;
+	struct list_head *next;
+	struct dentry *p, *ret;
+
+	if (prev == NULL)
+		return dget(prev);
 
+	spin_lock(&autofs4_lock);
+relock:
+	p = prev;
+	spin_lock(&p->d_lock);
+again:
+	next = p->d_subdirs.next;
 	if (next == &p->d_subdirs) {
 		while (1) {
-			if (p == root)
+			struct dentry *parent;
+
+			if (p == root) {
+				spin_unlock(&p->d_lock);
+				spin_unlock(&autofs4_lock);
+				dput(prev);
 				return NULL;
+			}
+
+			parent = p->d_parent;
+			if (!spin_trylock(&parent->d_lock)) {
+				spin_unlock(&p->d_lock);
+				cpu_relax();
+				goto relock;
+			}
+			spin_unlock(&p->d_lock);
 			next = p->d_u.d_child.next;
-			if (next != &p->d_parent->d_subdirs)
+			p = parent;
+			if (next != &parent->d_subdirs)
 				break;
-			p = p->d_parent;
 		}
 	}
-	return list_entry(next, struct dentry, d_u.d_child);
+	ret = list_entry(next, struct dentry, d_u.d_child);
+
+	spin_lock_nested(&ret->d_lock, DENTRY_D_LOCK_NESTED);
+	/* Negative dentry - try next */
+	if (!simple_positive(ret)) {
+		spin_unlock(&ret->d_lock);
+		p = ret;
+		goto again;
+	}
+	dget_dlock(ret);
+	spin_unlock(&ret->d_lock);
+	spin_unlock(&p->d_lock);
+	spin_unlock(&autofs4_lock);
+
+	dput(prev);
+
+	return ret;
 }
 
 /*
@@ -158,18 +198,11 @@ static int autofs4_tree_busy(struct vfsmount *mnt,
 	if (!simple_positive(top))
 		return 1;
 
-	spin_lock(&dcache_lock);
-	for (p = top; p; p = next_dentry(p, top)) {
-		/* Negative dentry - give up */
-		if (!simple_positive(p))
-			continue;
-
+	p = NULL;
+	while ((p = get_next_positive_dentry(p, top))) {
 		DPRINTK("dentry %p %.*s",
 			p, (int) p->d_name.len, p->d_name.name);
 
-		p = dget(p);
-		spin_unlock(&dcache_lock);
-
 		/*
 		 * Is someone visiting anywhere in the subtree ?
 		 * If there's no mount we need to check the usage
@@ -198,16 +231,13 @@ static int autofs4_tree_busy(struct vfsmount *mnt,
 			else
 				ino_count++;
 
-			if (atomic_read(&p->d_count) > ino_count) {
+			if (p->d_count > ino_count) {
 				top_ino->last_used = jiffies;
 				dput(p);
 				return 1;
 			}
 		}
-		dput(p);
-		spin_lock(&dcache_lock);
 	}
-	spin_unlock(&dcache_lock);
 
 	/* Timeout of a tree mount is ultimately determined by its top dentry */
 	if (!autofs4_can_expire(top, timeout, do_now))
@@ -226,32 +256,21 @@ static struct dentry *autofs4_check_leaves(struct vfsmount *mnt,
 	DPRINTK("parent %p %.*s",
 		parent, (int)parent->d_name.len, parent->d_name.name);
 
-	spin_lock(&dcache_lock);
-	for (p = parent; p; p = next_dentry(p, parent)) {
-		/* Negative dentry - give up */
-		if (!simple_positive(p))
-			continue;
-
+	p = NULL;
+	while ((p = get_next_positive_dentry(p, parent))) {
 		DPRINTK("dentry %p %.*s",
 			p, (int) p->d_name.len, p->d_name.name);
 
-		p = dget(p);
-		spin_unlock(&dcache_lock);
-
 		if (d_mountpoint(p)) {
 			/* Can we umount this guy */
 			if (autofs4_mount_busy(mnt, p))
-				goto cont;
+				continue;
 
 			/* Can we expire this guy */
 			if (autofs4_can_expire(p, timeout, do_now))
 				return p;
 		}
-cont:
-		dput(p);
-		spin_lock(&dcache_lock);
 	}
-	spin_unlock(&dcache_lock);
 	return NULL;
 }
 
@@ -276,7 +295,9 @@ struct dentry *autofs4_expire_direct(struct super_block *sb,
 		struct autofs_info *ino = autofs4_dentry_ino(root);
 		if (d_mountpoint(root)) {
 			ino->flags |= AUTOFS_INF_MOUNTPOINT;
-			root->d_mounted--;
+			spin_lock(&root->d_lock);
+			root->d_flags &= ~DCACHE_MOUNTED;
+			spin_unlock(&root->d_lock);
 		}
 		ino->flags |= AUTOFS_INF_EXPIRING;
 		init_completion(&ino->expire_complete);
@@ -302,8 +323,8 @@ struct dentry *autofs4_expire_indirect(struct super_block *sb,
 {
 	unsigned long timeout;
 	struct dentry *root = sb->s_root;
+	struct dentry *dentry;
 	struct dentry *expired = NULL;
-	struct list_head *next;
 	int do_now = how & AUTOFS_EXP_IMMEDIATE;
 	int exp_leaves = how & AUTOFS_EXP_LEAVES;
 	struct autofs_info *ino;
@@ -315,23 +336,8 @@ struct dentry *autofs4_expire_indirect(struct super_block *sb,
 	now = jiffies;
 	timeout = sbi->exp_timeout;
 
-	spin_lock(&dcache_lock);
-	next = root->d_subdirs.next;
-
-	/* On exit from the loop expire is set to a dgot dentry
-	 * to expire or it's NULL */
-	while ( next != &root->d_subdirs ) {
-		struct dentry *dentry = list_entry(next, struct dentry, d_u.d_child);
-
-		/* Negative dentry - give up */
-		if (!simple_positive(dentry)) {
-			next = next->next;
-			continue;
-		}
-
-		dentry = dget(dentry);
-		spin_unlock(&dcache_lock);
-
+	dentry = NULL;
+	while ((dentry = get_next_positive_dentry(dentry, root))) {
 		spin_lock(&sbi->fs_lock);
 		ino = autofs4_dentry_ino(dentry);
 
@@ -347,7 +353,7 @@ struct dentry *autofs4_expire_indirect(struct super_block *sb,
 
 			/* Path walk currently on this dentry? */
 			ino_count = atomic_read(&ino->count) + 2;
-			if (atomic_read(&dentry->d_count) > ino_count)
+			if (dentry->d_count > ino_count)
 				goto next;
 
 			/* Can we umount this guy */
@@ -369,7 +375,7 @@ struct dentry *autofs4_expire_indirect(struct super_block *sb,
 		if (!exp_leaves) {
 			/* Path walk currently on this dentry? */
 			ino_count = atomic_read(&ino->count) + 1;
-			if (atomic_read(&dentry->d_count) > ino_count)
+			if (dentry->d_count > ino_count)
 				goto next;
 
 			if (!autofs4_tree_busy(mnt, dentry, timeout, do_now)) {
@@ -383,7 +389,7 @@ struct dentry *autofs4_expire_indirect(struct super_block *sb,
 		} else {
 			/* Path walk currently on this dentry? */
 			ino_count = atomic_read(&ino->count) + 1;
-			if (atomic_read(&dentry->d_count) > ino_count)
+			if (dentry->d_count > ino_count)
 				goto next;
 
 			expired = autofs4_check_leaves(mnt, dentry, timeout, do_now);
@@ -394,11 +400,7 @@ struct dentry *autofs4_expire_indirect(struct super_block *sb,
 		}
 next:
 		spin_unlock(&sbi->fs_lock);
-		dput(dentry);
-		spin_lock(&dcache_lock);
-		next = next->next;
 	}
-	spin_unlock(&dcache_lock);
 	return NULL;
 
 found:
@@ -408,9 +410,13 @@ found:
 	ino->flags |= AUTOFS_INF_EXPIRING;
 	init_completion(&ino->expire_complete);
 	spin_unlock(&sbi->fs_lock);
-	spin_lock(&dcache_lock);
+	spin_lock(&autofs4_lock);
+	spin_lock(&expired->d_parent->d_lock);
+	spin_lock_nested(&expired->d_lock, DENTRY_D_LOCK_NESTED);
 	list_move(&expired->d_parent->d_subdirs, &expired->d_u.d_child);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&expired->d_lock);
+	spin_unlock(&expired->d_parent->d_lock);
+	spin_unlock(&autofs4_lock);
 	return expired;
 }
 
@@ -499,7 +505,14 @@ int autofs4_do_expire_multi(struct super_block *sb, struct vfsmount *mnt,
 
 		spin_lock(&sbi->fs_lock);
 		if (ino->flags & AUTOFS_INF_MOUNTPOINT) {
-			sb->s_root->d_mounted++;
+			spin_lock(&sb->s_root->d_lock);
+			/*
+			 * If we haven't been expired away, then reset
+			 * mounted status.
+			 */
+			if (mnt->mnt_parent != mnt)
+				sb->s_root->d_flags |= DCACHE_MOUNTED;
+			spin_unlock(&sb->s_root->d_lock);
 			ino->flags &= ~AUTOFS_INF_MOUNTPOINT;
 		}
 		ino->flags &= ~AUTOFS_INF_EXPIRING;
diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c
index ac87e49fa70..a7bdb9dcac8 100644
--- a/fs/autofs4/inode.c
+++ b/fs/autofs4/inode.c
@@ -309,7 +309,7 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent)
 		goto fail_iput;
 	pipe = NULL;
 
-	root->d_op = &autofs4_sb_dentry_operations;
+	d_set_d_op(root, &autofs4_sb_dentry_operations);
 	root->d_fsdata = ino;
 
 	/* Can this call block? */
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index d5c1401f003..651e4ef563b 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -23,6 +23,8 @@
 
 #include "autofs_i.h"
 
+DEFINE_SPINLOCK(autofs4_lock);
+
 static int autofs4_dir_symlink(struct inode *,struct dentry *,const char *);
 static int autofs4_dir_unlink(struct inode *,struct dentry *);
 static int autofs4_dir_rmdir(struct inode *,struct dentry *);
@@ -142,12 +144,15 @@ static int autofs4_dir_open(struct inode *inode, struct file *file)
 	 * autofs file system so just let the libfs routines handle
 	 * it.
 	 */
-	spin_lock(&dcache_lock);
+	spin_lock(&autofs4_lock);
+	spin_lock(&dentry->d_lock);
 	if (!d_mountpoint(dentry) && list_empty(&dentry->d_subdirs)) {
-		spin_unlock(&dcache_lock);
+		spin_unlock(&dentry->d_lock);
+		spin_unlock(&autofs4_lock);
 		return -ENOENT;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dentry->d_lock);
+	spin_unlock(&autofs4_lock);
 
 out:
 	return dcache_dir_open(inode, file);
@@ -252,9 +257,11 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 	/* We trigger a mount for almost all flags */
 	lookup_type = autofs4_need_mount(nd->flags);
 	spin_lock(&sbi->fs_lock);
-	spin_lock(&dcache_lock);
+	spin_lock(&autofs4_lock);
+	spin_lock(&dentry->d_lock);
 	if (!(lookup_type || ino->flags & AUTOFS_INF_PENDING)) {
-		spin_unlock(&dcache_lock);
+		spin_unlock(&dentry->d_lock);
+		spin_unlock(&autofs4_lock);
 		spin_unlock(&sbi->fs_lock);
 		goto follow;
 	}
@@ -266,7 +273,8 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 	 */
 	if (ino->flags & AUTOFS_INF_PENDING ||
 	    (!d_mountpoint(dentry) && list_empty(&dentry->d_subdirs))) {
-		spin_unlock(&dcache_lock);
+		spin_unlock(&dentry->d_lock);
+		spin_unlock(&autofs4_lock);
 		spin_unlock(&sbi->fs_lock);
 
 		status = try_to_fill_dentry(dentry, nd->flags);
@@ -275,7 +283,8 @@ static void *autofs4_follow_link(struct dentry *dentry, struct nameidata *nd)
 
 		goto follow;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dentry->d_lock);
+	spin_unlock(&autofs4_lock);
 	spin_unlock(&sbi->fs_lock);
 follow:
 	/*
@@ -306,12 +315,19 @@ out_error:
  */
 static int autofs4_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct inode *dir = dentry->d_parent->d_inode;
-	struct autofs_sb_info *sbi = autofs4_sbi(dir->i_sb);
-	int oz_mode = autofs4_oz_mode(sbi);
+	struct inode *dir;
+	struct autofs_sb_info *sbi;
+	int oz_mode;
 	int flags = nd ? nd->flags : 0;
 	int status = 1;
 
+	if (flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	dir = dentry->d_parent->d_inode;
+	sbi = autofs4_sbi(dir->i_sb);
+	oz_mode = autofs4_oz_mode(sbi);
+
 	/* Pending dentry */
 	spin_lock(&sbi->fs_lock);
 	if (autofs4_ispending(dentry)) {
@@ -346,12 +362,14 @@ static int autofs4_revalidate(struct dentry *dentry, struct nameidata *nd)
 		return 0;
 
 	/* Check for a non-mountpoint directory with no contents */
-	spin_lock(&dcache_lock);
+	spin_lock(&autofs4_lock);
+	spin_lock(&dentry->d_lock);
 	if (S_ISDIR(dentry->d_inode->i_mode) &&
 	    !d_mountpoint(dentry) && list_empty(&dentry->d_subdirs)) {
 		DPRINTK("dentry=%p %.*s, emptydir",
 			 dentry, dentry->d_name.len, dentry->d_name.name);
-		spin_unlock(&dcache_lock);
+		spin_unlock(&dentry->d_lock);
+		spin_unlock(&autofs4_lock);
 
 		/* The daemon never causes a mount to trigger */
 		if (oz_mode)
@@ -367,7 +385,8 @@ static int autofs4_revalidate(struct dentry *dentry, struct nameidata *nd)
 
 		return status;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dentry->d_lock);
+	spin_unlock(&autofs4_lock);
 
 	return 1;
 }
@@ -422,7 +441,7 @@ static struct dentry *autofs4_lookup_active(struct dentry *dentry)
 	const unsigned char *str = name->name;
 	struct list_head *p, *head;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&autofs4_lock);
 	spin_lock(&sbi->lookup_lock);
 	head = &sbi->active_list;
 	list_for_each(p, head) {
@@ -436,7 +455,7 @@ static struct dentry *autofs4_lookup_active(struct dentry *dentry)
 		spin_lock(&active->d_lock);
 
 		/* Already gone? */
-		if (atomic_read(&active->d_count) == 0)
+		if (active->d_count == 0)
 			goto next;
 
 		qstr = &active->d_name;
@@ -452,17 +471,17 @@ static struct dentry *autofs4_lookup_active(struct dentry *dentry)
 			goto next;
 
 		if (d_unhashed(active)) {
-			dget(active);
+			dget_dlock(active);
 			spin_unlock(&active->d_lock);
 			spin_unlock(&sbi->lookup_lock);
-			spin_unlock(&dcache_lock);
+			spin_unlock(&autofs4_lock);
 			return active;
 		}
 next:
 		spin_unlock(&active->d_lock);
 	}
 	spin_unlock(&sbi->lookup_lock);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&autofs4_lock);
 
 	return NULL;
 }
@@ -477,7 +496,7 @@ static struct dentry *autofs4_lookup_expiring(struct dentry *dentry)
 	const unsigned char *str = name->name;
 	struct list_head *p, *head;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&autofs4_lock);
 	spin_lock(&sbi->lookup_lock);
 	head = &sbi->expiring_list;
 	list_for_each(p, head) {
@@ -507,17 +526,17 @@ static struct dentry *autofs4_lookup_expiring(struct dentry *dentry)
 			goto next;
 
 		if (d_unhashed(expiring)) {
-			dget(expiring);
+			dget_dlock(expiring);
 			spin_unlock(&expiring->d_lock);
 			spin_unlock(&sbi->lookup_lock);
-			spin_unlock(&dcache_lock);
+			spin_unlock(&autofs4_lock);
 			return expiring;
 		}
 next:
 		spin_unlock(&expiring->d_lock);
 	}
 	spin_unlock(&sbi->lookup_lock);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&autofs4_lock);
 
 	return NULL;
 }
@@ -559,7 +578,7 @@ static struct dentry *autofs4_lookup(struct inode *dir, struct dentry *dentry, s
 		 * we check for the hashed dentry and return the newly
 		 * hashed dentry.
 		 */
-		dentry->d_op = &autofs4_root_dentry_operations;
+		d_set_d_op(dentry, &autofs4_root_dentry_operations);
 
 		/*
 		 * And we need to ensure that the same dentry is used for
@@ -698,9 +717,9 @@ static int autofs4_dir_symlink(struct inode *dir,
 	d_add(dentry, inode);
 
 	if (dir == dir->i_sb->s_root->d_inode)
-		dentry->d_op = &autofs4_root_dentry_operations;
+		d_set_d_op(dentry, &autofs4_root_dentry_operations);
 	else
-		dentry->d_op = &autofs4_dentry_operations;
+		d_set_d_op(dentry, &autofs4_dentry_operations);
 
 	dentry->d_fsdata = ino;
 	ino->dentry = dget(dentry);
@@ -753,12 +772,12 @@ static int autofs4_dir_unlink(struct inode *dir, struct dentry *dentry)
 
 	dir->i_mtime = CURRENT_TIME;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&autofs4_lock);
 	autofs4_add_expiring(dentry);
 	spin_lock(&dentry->d_lock);
 	__d_drop(dentry);
 	spin_unlock(&dentry->d_lock);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&autofs4_lock);
 
 	return 0;
 }
@@ -775,16 +794,20 @@ static int autofs4_dir_rmdir(struct inode *dir, struct dentry *dentry)
 	if (!autofs4_oz_mode(sbi))
 		return -EACCES;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&autofs4_lock);
+	spin_lock(&sbi->lookup_lock);
+	spin_lock(&dentry->d_lock);
 	if (!list_empty(&dentry->d_subdirs)) {
-		spin_unlock(&dcache_lock);
+		spin_unlock(&dentry->d_lock);
+		spin_unlock(&sbi->lookup_lock);
+		spin_unlock(&autofs4_lock);
 		return -ENOTEMPTY;
 	}
-	autofs4_add_expiring(dentry);
-	spin_lock(&dentry->d_lock);
+	__autofs4_add_expiring(dentry);
+	spin_unlock(&sbi->lookup_lock);
 	__d_drop(dentry);
 	spin_unlock(&dentry->d_lock);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&autofs4_lock);
 
 	if (atomic_dec_and_test(&ino->count)) {
 		p_ino = autofs4_dentry_ino(dentry->d_parent);
@@ -829,9 +852,9 @@ static int autofs4_dir_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	d_add(dentry, inode);
 
 	if (dir == dir->i_sb->s_root->d_inode)
-		dentry->d_op = &autofs4_root_dentry_operations;
+		d_set_d_op(dentry, &autofs4_root_dentry_operations);
 	else
-		dentry->d_op = &autofs4_dentry_operations;
+		d_set_d_op(dentry, &autofs4_dentry_operations);
 
 	dentry->d_fsdata = ino;
 	ino->dentry = dget(dentry);
@@ -980,19 +1003,11 @@ static int autofs4_root_ioctl_unlocked(struct inode *inode, struct file *filp,
 	}
 }
 
-static DEFINE_MUTEX(autofs4_ioctl_mutex);
-
 static long autofs4_root_ioctl(struct file *filp,
 			       unsigned int cmd, unsigned long arg)
 {
-	long ret;
 	struct inode *inode = filp->f_dentry->d_inode;
-
-	mutex_lock(&autofs4_ioctl_mutex);
-	ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
-	mutex_unlock(&autofs4_ioctl_mutex);
-
-	return ret;
+	return autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
 }
 
 #ifdef CONFIG_COMPAT
@@ -1002,13 +1017,11 @@ static long autofs4_root_compat_ioctl(struct file *filp,
 	struct inode *inode = filp->f_path.dentry->d_inode;
 	int ret;
 
-	mutex_lock(&autofs4_ioctl_mutex);
 	if (cmd == AUTOFS_IOC_READY || cmd == AUTOFS_IOC_FAIL)
 		ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
 	else
 		ret = autofs4_root_ioctl_unlocked(inode, filp, cmd,
 			(unsigned long)compat_ptr(arg));
-	mutex_unlock(&autofs4_ioctl_mutex);
 
 	return ret;
 }
diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c
index 2341375386f..c5f8459c905 100644
--- a/fs/autofs4/waitq.c
+++ b/fs/autofs4/waitq.c
@@ -186,16 +186,26 @@ static int autofs4_getpath(struct autofs_sb_info *sbi,
 {
 	struct dentry *root = sbi->sb->s_root;
 	struct dentry *tmp;
-	char *buf = *name;
+	char *buf;
 	char *p;
-	int len = 0;
+	int len;
+	unsigned seq;
 
-	spin_lock(&dcache_lock);
+rename_retry:
+	buf = *name;
+	len = 0;
+
+	seq = read_seqbegin(&rename_lock);
+	rcu_read_lock();
+	spin_lock(&autofs4_lock);
 	for (tmp = dentry ; tmp != root ; tmp = tmp->d_parent)
 		len += tmp->d_name.len + 1;
 
 	if (!len || --len > NAME_MAX) {
-		spin_unlock(&dcache_lock);
+		spin_unlock(&autofs4_lock);
+		rcu_read_unlock();
+		if (read_seqretry(&rename_lock, seq))
+			goto rename_retry;
 		return 0;
 	}
 
@@ -208,7 +218,10 @@ static int autofs4_getpath(struct autofs_sb_info *sbi,
 		p -= tmp->d_name.len;
 		strncpy(p, tmp->d_name.name, tmp->d_name.len);
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&autofs4_lock);
+	rcu_read_unlock();
+	if (read_seqretry(&rename_lock, seq))
+		goto rename_retry;
 
 	return len;
 }
diff --git a/fs/bad_inode.c b/fs/bad_inode.c
index f024d8aadde..9ad2369d9e3 100644
--- a/fs/bad_inode.c
+++ b/fs/bad_inode.c
@@ -229,8 +229,11 @@ static int bad_inode_readlink(struct dentry *dentry, char __user *buffer,
 	return -EIO;
 }
 
-static int bad_inode_permission(struct inode *inode, int mask)
+static int bad_inode_permission(struct inode *inode, int mask, unsigned int flags)
 {
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	return -EIO;
 }
 
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index aa4e7c7ae3c..de93581b79a 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -284,12 +284,18 @@ befs_alloc_inode(struct super_block *sb)
         return &bi->vfs_inode;
 }
 
-static void
-befs_destroy_inode(struct inode *inode)
+static void befs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
         kmem_cache_free(befs_inode_cachep, BEFS_I(inode));
 }
 
+static void befs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, befs_i_callback);
+}
+
 static void init_once(void *foo)
 {
         struct befs_inode_info *bi = (struct befs_inode_info *) foo;
diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c
index 76db6d7d49b..a8e37f81d09 100644
--- a/fs/bfs/inode.c
+++ b/fs/bfs/inode.c
@@ -248,11 +248,18 @@ static struct inode *bfs_alloc_inode(struct super_block *sb)
 	return &bi->vfs_inode;
 }
 
-static void bfs_destroy_inode(struct inode *inode)
+static void bfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(bfs_inode_cachep, BFS_I(inode));
 }
 
+static void bfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, bfs_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct bfs_inode_info *bi = foo;
diff --git a/fs/bio.c b/fs/bio.c
index 8abb2dfb2e7..4bd454fa844 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -370,6 +370,9 @@ struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
 {
 	struct bio *bio;
 
+	if (nr_iovecs > UIO_MAXIOV)
+		return NULL;
+
 	bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec),
 		      gfp_mask);
 	if (unlikely(!bio))
@@ -697,8 +700,12 @@ static void bio_free_map_data(struct bio_map_data *bmd)
 static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
 					       gfp_t gfp_mask)
 {
-	struct bio_map_data *bmd = kmalloc(sizeof(*bmd), gfp_mask);
+	struct bio_map_data *bmd;
 
+	if (iov_count > UIO_MAXIOV)
+		return NULL;
+
+	bmd = kmalloc(sizeof(*bmd), gfp_mask);
 	if (!bmd)
 		return NULL;
 
@@ -827,6 +834,12 @@ struct bio *bio_copy_user_iov(struct request_queue *q,
 		end = (uaddr + iov[i].iov_len + PAGE_SIZE - 1) >> PAGE_SHIFT;
 		start = uaddr >> PAGE_SHIFT;
 
+		/*
+		 * Overflow, abort
+		 */
+		if (end < start)
+			return ERR_PTR(-EINVAL);
+
 		nr_pages += end - start;
 		len += iov[i].iov_len;
 	}
@@ -955,6 +968,12 @@ static struct bio *__bio_map_user_iov(struct request_queue *q,
 		unsigned long end = (uaddr + len + PAGE_SIZE - 1) >> PAGE_SHIFT;
 		unsigned long start = uaddr >> PAGE_SHIFT;
 
+		/*
+		 * Overflow, abort
+		 */
+		if (end < start)
+			return ERR_PTR(-EINVAL);
+
 		nr_pages += end - start;
 		/*
 		 * buffer must be aligned to at least hardsector size for now
@@ -982,7 +1001,7 @@ static struct bio *__bio_map_user_iov(struct request_queue *q,
 		unsigned long start = uaddr >> PAGE_SHIFT;
 		const int local_nr_pages = end - start;
 		const int page_limit = cur_page + local_nr_pages;
-		
+
 		ret = get_user_pages_fast(uaddr, local_nr_pages,
 				write_to_vm, &pages[cur_page]);
 		if (ret < local_nr_pages) {
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 06e8ff12b97..771f2352701 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -11,7 +11,6 @@
 #include <linux/slab.h>
 #include <linux/kmod.h>
 #include <linux/major.h>
-#include <linux/smp_lock.h>
 #include <linux/device_cgroup.h>
 #include <linux/highmem.h>
 #include <linux/blkdev.h>
@@ -410,13 +409,20 @@ static struct inode *bdev_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void bdev_destroy_inode(struct inode *inode)
+static void bdev_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
 	struct bdev_inode *bdi = BDEV_I(inode);
 
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(bdev_cachep, bdi);
 }
 
+static void bdev_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, bdev_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct bdev_inode *ei = (struct bdev_inode *) foo;
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index 2222d161c7b..6ae2c8cac9d 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -185,18 +185,23 @@ static int btrfs_xattr_acl_set(struct dentry *dentry, const char *name,
 	return ret;
 }
 
-int btrfs_check_acl(struct inode *inode, int mask)
+int btrfs_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
-	struct posix_acl *acl;
 	int error = -EAGAIN;
 
-	acl = btrfs_get_acl(inode, ACL_TYPE_ACCESS);
+	if (flags & IPERM_FLAG_RCU) {
+		if (!negative_cached_acl(inode, ACL_TYPE_ACCESS))
+			error = -ECHILD;
 
-	if (IS_ERR(acl))
-		return PTR_ERR(acl);
-	if (acl) {
-		error = posix_acl_permission(inode, acl, mask);
-		posix_acl_release(acl);
+	} else {
+		struct posix_acl *acl;
+		acl = btrfs_get_acl(inode, ACL_TYPE_ACCESS);
+		if (IS_ERR(acl))
+			return PTR_ERR(acl);
+		if (acl) {
+			error = posix_acl_permission(inode, acl, mask);
+			posix_acl_release(acl);
+		}
 	}
 
 	return error;
diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c
index 7845d1f7d1d..b50bc4bd5c5 100644
--- a/fs/btrfs/compression.c
+++ b/fs/btrfs/compression.c
@@ -91,23 +91,10 @@ static inline int compressed_bio_size(struct btrfs_root *root,
 static struct bio *compressed_bio_alloc(struct block_device *bdev,
 					u64 first_byte, gfp_t gfp_flags)
 {
-	struct bio *bio;
 	int nr_vecs;
 
 	nr_vecs = bio_get_nr_vecs(bdev);
-	bio = bio_alloc(gfp_flags, nr_vecs);
-
-	if (bio == NULL && (current->flags & PF_MEMALLOC)) {
-		while (!bio && (nr_vecs /= 2))
-			bio = bio_alloc(gfp_flags, nr_vecs);
-	}
-
-	if (bio) {
-		bio->bi_size = 0;
-		bio->bi_bdev = bdev;
-		bio->bi_sector = first_byte >> 9;
-	}
-	return bio;
+	return btrfs_bio_alloc(bdev, first_byte >> 9, nr_vecs, gfp_flags);
 }
 
 static int check_compressed_csum(struct inode *inode,
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 8db9234f6b4..a142d204b52 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -808,9 +808,9 @@ struct btrfs_block_group_cache {
 	int extents_thresh;
 	int free_extents;
 	int total_bitmaps;
-	int ro:1;
-	int dirty:1;
-	int iref:1;
+	unsigned int ro:1;
+	unsigned int dirty:1;
+	unsigned int iref:1;
 
 	int disk_cache_state;
 
@@ -2544,7 +2544,7 @@ int btrfs_sync_fs(struct super_block *sb, int wait);
 
 /* acl.c */
 #ifdef CONFIG_BTRFS_FS_POSIX_ACL
-int btrfs_check_acl(struct inode *inode, int mask);
+int btrfs_check_acl(struct inode *inode, int mask, unsigned int flags);
 #else
 #define btrfs_check_acl NULL
 #endif
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index fb827d0d718..51d2e4de34e 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -28,6 +28,7 @@
 #include <linux/freezer.h>
 #include <linux/crc32c.h>
 #include <linux/slab.h>
+#include <linux/migrate.h>
 #include "compat.h"
 #include "ctree.h"
 #include "disk-io.h"
@@ -355,6 +356,8 @@ static int csum_dirty_buffer(struct btrfs_root *root, struct page *page)
 	ret = btree_read_extent_buffer_pages(root, eb, start + PAGE_CACHE_SIZE,
 					     btrfs_header_generation(eb));
 	BUG_ON(ret);
+	WARN_ON(!btrfs_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN));
+
 	found_start = btrfs_header_bytenr(eb);
 	if (found_start != start) {
 		WARN_ON(1);
@@ -693,6 +696,27 @@ static int btree_submit_bio_hook(struct inode *inode, int rw, struct bio *bio,
 				   __btree_submit_bio_done);
 }
 
+#ifdef CONFIG_MIGRATION
+static int btree_migratepage(struct address_space *mapping,
+			struct page *newpage, struct page *page)
+{
+	/*
+	 * we can't safely write a btree page from here,
+	 * we haven't done the locking hook
+	 */
+	if (PageDirty(page))
+		return -EAGAIN;
+	/*
+	 * Buffers may be managed in a filesystem specific way.
+	 * We must have no buffers or drop them.
+	 */
+	if (page_has_private(page) &&
+	    !try_to_release_page(page, GFP_KERNEL))
+		return -EAGAIN;
+	return migrate_page(mapping, newpage, page);
+}
+#endif
+
 static int btree_writepage(struct page *page, struct writeback_control *wbc)
 {
 	struct extent_io_tree *tree;
@@ -707,8 +731,7 @@ static int btree_writepage(struct page *page, struct writeback_control *wbc)
 	}
 
 	redirty_page_for_writepage(wbc, page);
-	eb = btrfs_find_tree_block(root, page_offset(page),
-				      PAGE_CACHE_SIZE);
+	eb = btrfs_find_tree_block(root, page_offset(page), PAGE_CACHE_SIZE);
 	WARN_ON(!eb);
 
 	was_dirty = test_and_set_bit(EXTENT_BUFFER_DIRTY, &eb->bflags);
@@ -799,6 +822,9 @@ static const struct address_space_operations btree_aops = {
 	.releasepage	= btree_releasepage,
 	.invalidatepage = btree_invalidatepage,
 	.sync_page	= block_sync_page,
+#ifdef CONFIG_MIGRATION
+	.migratepage	= btree_migratepage,
+#endif
 };
 
 int readahead_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize,
@@ -981,7 +1007,10 @@ static int find_and_setup_root(struct btrfs_root *tree_root,
 	blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
 	root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
 				     blocksize, generation);
-	BUG_ON(!root->node);
+	if (!root->node || !btrfs_buffer_uptodate(root->node, generation)) {
+		free_extent_buffer(root->node);
+		return -EIO;
+	}
 	root->commit_root = btrfs_root_node(root);
 	return 0;
 }
@@ -1538,10 +1567,8 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 						 GFP_NOFS);
 	struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root),
 						 GFP_NOFS);
-	struct btrfs_root *tree_root = kzalloc(sizeof(struct btrfs_root),
-					       GFP_NOFS);
-	struct btrfs_fs_info *fs_info = kzalloc(sizeof(*fs_info),
-						GFP_NOFS);
+	struct btrfs_root *tree_root = btrfs_sb(sb);
+	struct btrfs_fs_info *fs_info = tree_root->fs_info;
 	struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root),
 						GFP_NOFS);
 	struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root),
diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c
index 951ef09b82f..0ccf9a8afcd 100644
--- a/fs/btrfs/export.c
+++ b/fs/btrfs/export.c
@@ -110,7 +110,7 @@ static struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
 
 	dentry = d_obtain_alias(inode);
 	if (!IS_ERR(dentry))
-		dentry->d_op = &btrfs_dentry_operations;
+		d_set_d_op(dentry, &btrfs_dentry_operations);
 	return dentry;
 fail:
 	srcu_read_unlock(&fs_info->subvol_srcu, index);
@@ -166,7 +166,7 @@ static struct dentry *btrfs_fh_to_dentry(struct super_block *sb, struct fid *fh,
 static struct dentry *btrfs_get_parent(struct dentry *child)
 {
 	struct inode *dir = child->d_inode;
-	static struct dentry *dentry;
+	struct dentry *dentry;
 	struct btrfs_root *root = BTRFS_I(dir)->root;
 	struct btrfs_path *path;
 	struct extent_buffer *leaf;
@@ -225,16 +225,92 @@ static struct dentry *btrfs_get_parent(struct dentry *child)
 	key.offset = 0;
 	dentry = d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root, NULL));
 	if (!IS_ERR(dentry))
-		dentry->d_op = &btrfs_dentry_operations;
+		d_set_d_op(dentry, &btrfs_dentry_operations);
 	return dentry;
 fail:
 	btrfs_free_path(path);
 	return ERR_PTR(ret);
 }
 
+static int btrfs_get_name(struct dentry *parent, char *name,
+			  struct dentry *child)
+{
+	struct inode *inode = child->d_inode;
+	struct inode *dir = parent->d_inode;
+	struct btrfs_path *path;
+	struct btrfs_root *root = BTRFS_I(dir)->root;
+	struct btrfs_inode_ref *iref;
+	struct btrfs_root_ref *rref;
+	struct extent_buffer *leaf;
+	unsigned long name_ptr;
+	struct btrfs_key key;
+	int name_len;
+	int ret;
+
+	if (!dir || !inode)
+		return -EINVAL;
+
+	if (!S_ISDIR(dir->i_mode))
+		return -EINVAL;
+
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+	path->leave_spinning = 1;
+
+	if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+		key.objectid = BTRFS_I(inode)->root->root_key.objectid;
+		key.type = BTRFS_ROOT_BACKREF_KEY;
+		key.offset = (u64)-1;
+		root = root->fs_info->tree_root;
+	} else {
+		key.objectid = inode->i_ino;
+		key.offset = dir->i_ino;
+		key.type = BTRFS_INODE_REF_KEY;
+	}
+
+	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+	if (ret < 0) {
+		btrfs_free_path(path);
+		return ret;
+	} else if (ret > 0) {
+		if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+			path->slots[0]--;
+		} else {
+			btrfs_free_path(path);
+			return -ENOENT;
+		}
+	}
+	leaf = path->nodes[0];
+
+	if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+	       rref = btrfs_item_ptr(leaf, path->slots[0],
+				     struct btrfs_root_ref);
+	       name_ptr = (unsigned long)(rref + 1);
+	       name_len = btrfs_root_ref_name_len(leaf, rref);
+	} else {
+		iref = btrfs_item_ptr(leaf, path->slots[0],
+				      struct btrfs_inode_ref);
+		name_ptr = (unsigned long)(iref + 1);
+		name_len = btrfs_inode_ref_name_len(leaf, iref);
+	}
+
+	read_extent_buffer(leaf, name, name_ptr, name_len);
+	btrfs_free_path(path);
+
+	/*
+	 * have to add the null termination to make sure that reconnect_path
+	 * gets the right len for strlen
+	 */
+	name[name_len] = '\0';
+
+	return 0;
+}
+
 const struct export_operations btrfs_export_ops = {
 	.encode_fh	= btrfs_encode_fh,
 	.fh_to_dentry	= btrfs_fh_to_dentry,
 	.fh_to_parent	= btrfs_fh_to_parent,
 	.get_parent	= btrfs_get_parent,
+	.get_name	= btrfs_get_name,
 };
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 0c097f3aec4..227e5815d83 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -429,6 +429,7 @@ err:
 
 static int cache_block_group(struct btrfs_block_group_cache *cache,
 			     struct btrfs_trans_handle *trans,
+			     struct btrfs_root *root,
 			     int load_cache_only)
 {
 	struct btrfs_fs_info *fs_info = cache->fs_info;
@@ -442,9 +443,12 @@ static int cache_block_group(struct btrfs_block_group_cache *cache,
 
 	/*
 	 * We can't do the read from on-disk cache during a commit since we need
-	 * to have the normal tree locking.
+	 * to have the normal tree locking.  Also if we are currently trying to
+	 * allocate blocks for the tree root we can't do the fast caching since
+	 * we likely hold important locks.
 	 */
-	if (!trans->transaction->in_commit) {
+	if (!trans->transaction->in_commit &&
+	    (root && root != root->fs_info->tree_root)) {
 		spin_lock(&cache->lock);
 		if (cache->cached != BTRFS_CACHE_NO) {
 			spin_unlock(&cache->lock);
@@ -2741,6 +2745,7 @@ static int cache_save_setup(struct btrfs_block_group_cache *block_group,
 	struct btrfs_root *root = block_group->fs_info->tree_root;
 	struct inode *inode = NULL;
 	u64 alloc_hint = 0;
+	int dcs = BTRFS_DC_ERROR;
 	int num_pages = 0;
 	int retries = 0;
 	int ret = 0;
@@ -2795,6 +2800,8 @@ again:
 
 	spin_lock(&block_group->lock);
 	if (block_group->cached != BTRFS_CACHE_FINISHED) {
+		/* We're not cached, don't bother trying to write stuff out */
+		dcs = BTRFS_DC_WRITTEN;
 		spin_unlock(&block_group->lock);
 		goto out_put;
 	}
@@ -2821,6 +2828,8 @@ again:
 	ret = btrfs_prealloc_file_range_trans(inode, trans, 0, 0, num_pages,
 					      num_pages, num_pages,
 					      &alloc_hint);
+	if (!ret)
+		dcs = BTRFS_DC_SETUP;
 	btrfs_free_reserved_data_space(inode, num_pages);
 out_put:
 	iput(inode);
@@ -2828,10 +2837,7 @@ out_free:
 	btrfs_release_path(root, path);
 out:
 	spin_lock(&block_group->lock);
-	if (ret)
-		block_group->disk_cache_state = BTRFS_DC_ERROR;
-	else
-		block_group->disk_cache_state = BTRFS_DC_SETUP;
+	block_group->disk_cache_state = dcs;
 	spin_unlock(&block_group->lock);
 
 	return ret;
@@ -3037,7 +3043,13 @@ static void set_avail_alloc_bits(struct btrfs_fs_info *fs_info, u64 flags)
 
 u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags)
 {
-	u64 num_devices = root->fs_info->fs_devices->rw_devices;
+	/*
+	 * we add in the count of missing devices because we want
+	 * to make sure that any RAID levels on a degraded FS
+	 * continue to be honored.
+	 */
+	u64 num_devices = root->fs_info->fs_devices->rw_devices +
+		root->fs_info->fs_devices->missing_devices;
 
 	if (num_devices == 1)
 		flags &= ~(BTRFS_BLOCK_GROUP_RAID1 | BTRFS_BLOCK_GROUP_RAID0);
@@ -3412,7 +3424,7 @@ again:
 	 * our reservation.
 	 */
 	if (unused <= space_info->total_bytes) {
-		unused -= space_info->total_bytes;
+		unused = space_info->total_bytes - unused;
 		if (unused >= num_bytes) {
 			if (!reserved)
 				space_info->bytes_reserved += orig_bytes;
@@ -4080,7 +4092,7 @@ static int update_block_group(struct btrfs_trans_handle *trans,
 		 * space back to the block group, otherwise we will leak space.
 		 */
 		if (!alloc && cache->cached == BTRFS_CACHE_NO)
-			cache_block_group(cache, trans, 1);
+			cache_block_group(cache, trans, NULL, 1);
 
 		byte_in_group = bytenr - cache->key.objectid;
 		WARN_ON(byte_in_group > cache->key.offset);
@@ -4930,11 +4942,31 @@ search:
 		btrfs_get_block_group(block_group);
 		search_start = block_group->key.objectid;
 
+		/*
+		 * this can happen if we end up cycling through all the
+		 * raid types, but we want to make sure we only allocate
+		 * for the proper type.
+		 */
+		if (!block_group_bits(block_group, data)) {
+		    u64 extra = BTRFS_BLOCK_GROUP_DUP |
+				BTRFS_BLOCK_GROUP_RAID1 |
+				BTRFS_BLOCK_GROUP_RAID10;
+
+			/*
+			 * if they asked for extra copies and this block group
+			 * doesn't provide them, bail.  This does allow us to
+			 * fill raid0 from raid1.
+			 */
+			if ((data & extra) && !(block_group->flags & extra))
+				goto loop;
+		}
+
 have_block_group:
 		if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
 			u64 free_percent;
 
-			ret = cache_block_group(block_group, trans, 1);
+			ret = cache_block_group(block_group, trans,
+						orig_root, 1);
 			if (block_group->cached == BTRFS_CACHE_FINISHED)
 				goto have_block_group;
 
@@ -4958,7 +4990,8 @@ have_block_group:
 			if (loop > LOOP_CACHING_NOWAIT ||
 			    (loop > LOOP_FIND_IDEAL &&
 			     atomic_read(&space_info->caching_threads) < 2)) {
-				ret = cache_block_group(block_group, trans, 0);
+				ret = cache_block_group(block_group, trans,
+							orig_root, 0);
 				BUG_ON(ret);
 			}
 			found_uncached_bg = true;
@@ -5515,7 +5548,7 @@ int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans,
 	u64 num_bytes = ins->offset;
 
 	block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
-	cache_block_group(block_group, trans, 0);
+	cache_block_group(block_group, trans, NULL, 0);
 	caching_ctl = get_caching_control(block_group);
 
 	if (!caching_ctl) {
@@ -6300,9 +6333,13 @@ int btrfs_drop_snapshot(struct btrfs_root *root,
 					   NULL, NULL);
 		BUG_ON(ret < 0);
 		if (ret > 0) {
-			ret = btrfs_del_orphan_item(trans, tree_root,
-						    root->root_key.objectid);
-			BUG_ON(ret);
+			/* if we fail to delete the orphan item this time
+			 * around, it'll get picked up the next time.
+			 *
+			 * The most common failure here is just -ENOENT.
+			 */
+			btrfs_del_orphan_item(trans, tree_root,
+					      root->root_key.objectid);
 		}
 	}
 
@@ -7878,7 +7915,14 @@ static u64 update_block_group_flags(struct btrfs_root *root, u64 flags)
 	u64 stripped = BTRFS_BLOCK_GROUP_RAID0 |
 		BTRFS_BLOCK_GROUP_RAID1 | BTRFS_BLOCK_GROUP_RAID10;
 
-	num_devices = root->fs_info->fs_devices->rw_devices;
+	/*
+	 * we add in the count of missing devices because we want
+	 * to make sure that any RAID levels on a degraded FS
+	 * continue to be honored.
+	 */
+	num_devices = root->fs_info->fs_devices->rw_devices +
+		root->fs_info->fs_devices->missing_devices;
+
 	if (num_devices == 1) {
 		stripped |= BTRFS_BLOCK_GROUP_DUP;
 		stripped = flags & ~stripped;
@@ -8247,7 +8291,6 @@ int btrfs_read_block_groups(struct btrfs_root *root)
 			break;
 		if (ret != 0)
 			goto error;
-
 		leaf = path->nodes[0];
 		btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
 		cache = kzalloc(sizeof(*cache), GFP_NOFS);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index eac10e3260a..3e86b9f3650 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -1828,9 +1828,9 @@ static void end_bio_extent_preparewrite(struct bio *bio, int err)
 	bio_put(bio);
 }
 
-static struct bio *
-extent_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
-		 gfp_t gfp_flags)
+struct bio *
+btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
+		gfp_t gfp_flags)
 {
 	struct bio *bio;
 
@@ -1919,7 +1919,7 @@ static int submit_extent_page(int rw, struct extent_io_tree *tree,
 	else
 		nr = bio_get_nr_vecs(bdev);
 
-	bio = extent_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH);
+	bio = btrfs_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH);
 
 	bio_add_page(bio, page, page_size, offset);
 	bio->bi_end_io = end_io_func;
@@ -2901,21 +2901,53 @@ out:
 int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		__u64 start, __u64 len, get_extent_t *get_extent)
 {
-	int ret;
+	int ret = 0;
 	u64 off = start;
 	u64 max = start + len;
 	u32 flags = 0;
+	u32 found_type;
+	u64 last;
 	u64 disko = 0;
+	struct btrfs_key found_key;
 	struct extent_map *em = NULL;
 	struct extent_state *cached_state = NULL;
+	struct btrfs_path *path;
+	struct btrfs_file_extent_item *item;
 	int end = 0;
 	u64 em_start = 0, em_len = 0;
 	unsigned long emflags;
-	ret = 0;
+	int hole = 0;
 
 	if (len == 0)
 		return -EINVAL;
 
+	path = btrfs_alloc_path();
+	if (!path)
+		return -ENOMEM;
+	path->leave_spinning = 1;
+
+	ret = btrfs_lookup_file_extent(NULL, BTRFS_I(inode)->root,
+				       path, inode->i_ino, -1, 0);
+	if (ret < 0) {
+		btrfs_free_path(path);
+		return ret;
+	}
+	WARN_ON(!ret);
+	path->slots[0]--;
+	item = btrfs_item_ptr(path->nodes[0], path->slots[0],
+			      struct btrfs_file_extent_item);
+	btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]);
+	found_type = btrfs_key_type(&found_key);
+
+	/* No extents, just return */
+	if (found_key.objectid != inode->i_ino ||
+	    found_type != BTRFS_EXTENT_DATA_KEY) {
+		btrfs_free_path(path);
+		return 0;
+	}
+	last = found_key.offset;
+	btrfs_free_path(path);
+
 	lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0,
 			 &cached_state, GFP_NOFS);
 	em = get_extent(inode, NULL, 0, off, max - off, 0);
@@ -2925,11 +2957,18 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		ret = PTR_ERR(em);
 		goto out;
 	}
+
 	while (!end) {
+		hole = 0;
 		off = em->start + em->len;
 		if (off >= max)
 			end = 1;
 
+		if (em->block_start == EXTENT_MAP_HOLE) {
+			hole = 1;
+			goto next;
+		}
+
 		em_start = em->start;
 		em_len = em->len;
 
@@ -2939,8 +2978,6 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		if (em->block_start == EXTENT_MAP_LAST_BYTE) {
 			end = 1;
 			flags |= FIEMAP_EXTENT_LAST;
-		} else if (em->block_start == EXTENT_MAP_HOLE) {
-			flags |= FIEMAP_EXTENT_UNWRITTEN;
 		} else if (em->block_start == EXTENT_MAP_INLINE) {
 			flags |= (FIEMAP_EXTENT_DATA_INLINE |
 				  FIEMAP_EXTENT_NOT_ALIGNED);
@@ -2953,10 +2990,10 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 		if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags))
 			flags |= FIEMAP_EXTENT_ENCODED;
 
+next:
 		emflags = em->flags;
 		free_extent_map(em);
 		em = NULL;
-
 		if (!end) {
 			em = get_extent(inode, NULL, 0, off, max - off, 0);
 			if (!em)
@@ -2967,15 +3004,23 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
 			}
 			emflags = em->flags;
 		}
+
 		if (test_bit(EXTENT_FLAG_VACANCY, &emflags)) {
 			flags |= FIEMAP_EXTENT_LAST;
 			end = 1;
 		}
 
-		ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
-					em_len, flags);
-		if (ret)
-			goto out_free;
+		if (em_start == last) {
+			flags |= FIEMAP_EXTENT_LAST;
+			end = 1;
+		}
+
+		if (!hole) {
+			ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
+						em_len, flags);
+			if (ret)
+				goto out_free;
+		}
 	}
 out_free:
 	free_extent_map(em);
@@ -3836,8 +3881,10 @@ int try_release_extent_buffer(struct extent_io_tree *tree, struct page *page)
 
 	spin_lock(&tree->buffer_lock);
 	eb = radix_tree_lookup(&tree->buffer, start >> PAGE_CACHE_SHIFT);
-	if (!eb)
-		goto out;
+	if (!eb) {
+		spin_unlock(&tree->buffer_lock);
+		return ret;
+	}
 
 	if (test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) {
 		ret = 0;
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 1c6d4f342ef..4183c8178f0 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -310,4 +310,7 @@ int extent_clear_unlock_delalloc(struct inode *inode,
 				struct extent_io_tree *tree,
 				u64 start, u64 end, struct page *locked_page,
 				unsigned long op);
+struct bio *
+btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
+		gfp_t gfp_flags);
 #endif
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index e354c33df08..66836d85763 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -48,30 +48,34 @@ static noinline int btrfs_copy_from_user(loff_t pos, int num_pages,
 					 struct page **prepared_pages,
 					 struct iov_iter *i)
 {
-	size_t copied;
+	size_t copied = 0;
 	int pg = 0;
 	int offset = pos & (PAGE_CACHE_SIZE - 1);
+	int total_copied = 0;
 
 	while (write_bytes > 0) {
 		size_t count = min_t(size_t,
 				     PAGE_CACHE_SIZE - offset, write_bytes);
 		struct page *page = prepared_pages[pg];
-again:
-		if (unlikely(iov_iter_fault_in_readable(i, count)))
-			return -EFAULT;
-
-		/* Copy data from userspace to the current page */
-		copied = iov_iter_copy_from_user(page, i, offset, count);
+		/*
+		 * Copy data from userspace to the current page
+		 *
+		 * Disable pagefault to avoid recursive lock since
+		 * the pages are already locked
+		 */
+		pagefault_disable();
+		copied = iov_iter_copy_from_user_atomic(page, i, offset, count);
+		pagefault_enable();
 
 		/* Flush processor's dcache for this page */
 		flush_dcache_page(page);
 		iov_iter_advance(i, copied);
 		write_bytes -= copied;
+		total_copied += copied;
 
+		/* Return to btrfs_file_aio_write to fault page */
 		if (unlikely(copied == 0)) {
-			count = min_t(size_t, PAGE_CACHE_SIZE - offset,
-				      iov_iter_single_seg_count(i));
-			goto again;
+			break;
 		}
 
 		if (unlikely(copied < PAGE_CACHE_SIZE - offset)) {
@@ -81,7 +85,7 @@ again:
 			offset = 0;
 		}
 	}
-	return 0;
+	return total_copied;
 }
 
 /*
@@ -854,6 +858,8 @@ static ssize_t btrfs_file_aio_write(struct kiocb *iocb,
 	unsigned long last_index;
 	int will_write;
 	int buffered = 0;
+	int copied = 0;
+	int dirty_pages = 0;
 
 	will_write = ((file->f_flags & O_DSYNC) || IS_SYNC(inode) ||
 		      (file->f_flags & O_DIRECT));
@@ -970,7 +976,17 @@ static ssize_t btrfs_file_aio_write(struct kiocb *iocb,
 		WARN_ON(num_pages > nrptrs);
 		memset(pages, 0, sizeof(struct page *) * nrptrs);
 
-		ret = btrfs_delalloc_reserve_space(inode, write_bytes);
+		/*
+		 * Fault pages before locking them in prepare_pages
+		 * to avoid recursive lock
+		 */
+		if (unlikely(iov_iter_fault_in_readable(&i, write_bytes))) {
+			ret = -EFAULT;
+			goto out;
+		}
+
+		ret = btrfs_delalloc_reserve_space(inode,
+					num_pages << PAGE_CACHE_SHIFT);
 		if (ret)
 			goto out;
 
@@ -978,37 +994,49 @@ static ssize_t btrfs_file_aio_write(struct kiocb *iocb,
 				    pos, first_index, last_index,
 				    write_bytes);
 		if (ret) {
-			btrfs_delalloc_release_space(inode, write_bytes);
+			btrfs_delalloc_release_space(inode,
+					num_pages << PAGE_CACHE_SHIFT);
 			goto out;
 		}
 
-		ret = btrfs_copy_from_user(pos, num_pages,
+		copied = btrfs_copy_from_user(pos, num_pages,
 					   write_bytes, pages, &i);
-		if (ret == 0) {
+		dirty_pages = (copied + PAGE_CACHE_SIZE - 1) >>
+					PAGE_CACHE_SHIFT;
+
+		if (num_pages > dirty_pages) {
+			if (copied > 0)
+				atomic_inc(
+					&BTRFS_I(inode)->outstanding_extents);
+			btrfs_delalloc_release_space(inode,
+					(num_pages - dirty_pages) <<
+					PAGE_CACHE_SHIFT);
+		}
+
+		if (copied > 0) {
 			dirty_and_release_pages(NULL, root, file, pages,
-						num_pages, pos, write_bytes);
+						dirty_pages, pos, copied);
 		}
 
 		btrfs_drop_pages(pages, num_pages);
-		if (ret) {
-			btrfs_delalloc_release_space(inode, write_bytes);
-			goto out;
-		}
 
-		if (will_write) {
-			filemap_fdatawrite_range(inode->i_mapping, pos,
-						 pos + write_bytes - 1);
-		} else {
-			balance_dirty_pages_ratelimited_nr(inode->i_mapping,
-							   num_pages);
-			if (num_pages <
-			    (root->leafsize >> PAGE_CACHE_SHIFT) + 1)
-				btrfs_btree_balance_dirty(root, 1);
-			btrfs_throttle(root);
+		if (copied > 0) {
+			if (will_write) {
+				filemap_fdatawrite_range(inode->i_mapping, pos,
+							 pos + copied - 1);
+			} else {
+				balance_dirty_pages_ratelimited_nr(
+							inode->i_mapping,
+							dirty_pages);
+				if (dirty_pages <
+				(root->leafsize >> PAGE_CACHE_SHIFT) + 1)
+					btrfs_btree_balance_dirty(root, 1);
+				btrfs_throttle(root);
+			}
 		}
 
-		pos += write_bytes;
-		num_written += write_bytes;
+		pos += copied;
+		num_written += copied;
 
 		cond_resched();
 	}
@@ -1047,8 +1075,14 @@ out:
 
 		if ((file->f_flags & O_DSYNC) || IS_SYNC(inode)) {
 			trans = btrfs_start_transaction(root, 0);
+			if (IS_ERR(trans)) {
+				num_written = PTR_ERR(trans);
+				goto done;
+			}
+			mutex_lock(&inode->i_mutex);
 			ret = btrfs_log_dentry_safe(trans, root,
 						    file->f_dentry);
+			mutex_unlock(&inode->i_mutex);
 			if (ret == 0) {
 				ret = btrfs_sync_log(trans, root);
 				if (ret == 0)
@@ -1067,6 +1101,7 @@ out:
 			     (start_pos + num_written - 1) >> PAGE_CACHE_SHIFT);
 		}
 	}
+done:
 	current->backing_dev_info = NULL;
 	return num_written ? num_written : err;
 }
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 22ee0dc2e6b..60d68426695 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -290,7 +290,7 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info,
 		       (unsigned long long)BTRFS_I(inode)->generation,
 		       (unsigned long long)generation,
 		       (unsigned long long)block_group->key.objectid);
-		goto out;
+		goto free_cache;
 	}
 
 	if (!num_entries)
@@ -524,6 +524,12 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 		return 0;
 	}
 
+	node = rb_first(&block_group->free_space_offset);
+	if (!node) {
+		iput(inode);
+		return 0;
+	}
+
 	last_index = (i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT;
 	filemap_write_and_wait(inode->i_mapping);
 	btrfs_wait_ordered_range(inode, inode->i_size &
@@ -543,10 +549,6 @@ int btrfs_write_out_cache(struct btrfs_root *root,
 	 */
 	first_page_offset = (sizeof(u32) * num_checksums) + sizeof(u64);
 
-	node = rb_first(&block_group->free_space_offset);
-	if (!node)
-		goto out_free;
-
 	/*
 	 * Lock all pages first so we can lock the extent safely.
 	 *
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 558cac2dfa5..a0ff46a4789 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -495,7 +495,7 @@ again:
 		add_async_extent(async_cow, start, num_bytes,
 				 total_compressed, pages, nr_pages_ret);
 
-		if (start + num_bytes < end && start + num_bytes < actual_end) {
+		if (start + num_bytes < end) {
 			start += num_bytes;
 			pages = NULL;
 			cond_resched();
@@ -4084,7 +4084,7 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
 	int index;
 	int ret;
 
-	dentry->d_op = &btrfs_dentry_operations;
+	d_set_d_op(dentry, &btrfs_dentry_operations);
 
 	if (dentry->d_name.len > BTRFS_NAME_LEN)
 		return ERR_PTR(-ENAMETOOLONG);
@@ -4127,7 +4127,7 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
 	return inode;
 }
 
-static int btrfs_dentry_delete(struct dentry *dentry)
+static int btrfs_dentry_delete(const struct dentry *dentry)
 {
 	struct btrfs_root *root;
 
@@ -4501,6 +4501,7 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans,
 	BTRFS_I(inode)->index_cnt = 2;
 	BTRFS_I(inode)->root = root;
 	BTRFS_I(inode)->generation = trans->transid;
+	inode->i_generation = BTRFS_I(inode)->generation;
 	btrfs_set_inode_space_info(root, inode);
 
 	if (mode & S_IFDIR)
@@ -4622,12 +4623,12 @@ int btrfs_add_link(struct btrfs_trans_handle *trans,
 }
 
 static int btrfs_add_nondir(struct btrfs_trans_handle *trans,
-			    struct dentry *dentry, struct inode *inode,
-			    int backref, u64 index)
+			    struct inode *dir, struct dentry *dentry,
+			    struct inode *inode, int backref, u64 index)
 {
-	int err = btrfs_add_link(trans, dentry->d_parent->d_inode,
-				 inode, dentry->d_name.name,
-				 dentry->d_name.len, backref, index);
+	int err = btrfs_add_link(trans, dir, inode,
+				 dentry->d_name.name, dentry->d_name.len,
+				 backref, index);
 	if (!err) {
 		d_instantiate(dentry, inode);
 		return 0;
@@ -4668,8 +4669,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry,
 	btrfs_set_trans_block_group(trans, dir);
 
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
-				dentry->d_name.len,
-				dentry->d_parent->d_inode->i_ino, objectid,
+				dentry->d_name.len, dir->i_ino, objectid,
 				BTRFS_I(dir)->block_group, mode, &index);
 	err = PTR_ERR(inode);
 	if (IS_ERR(inode))
@@ -4682,7 +4682,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry,
 	}
 
 	btrfs_set_trans_block_group(trans, inode);
-	err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+	err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
 	if (err)
 		drop_inode = 1;
 	else {
@@ -4730,10 +4730,8 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry,
 	btrfs_set_trans_block_group(trans, dir);
 
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
-				dentry->d_name.len,
-				dentry->d_parent->d_inode->i_ino,
-				objectid, BTRFS_I(dir)->block_group, mode,
-				&index);
+				dentry->d_name.len, dir->i_ino, objectid,
+				BTRFS_I(dir)->block_group, mode, &index);
 	err = PTR_ERR(inode);
 	if (IS_ERR(inode))
 		goto out_unlock;
@@ -4745,7 +4743,7 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry,
 	}
 
 	btrfs_set_trans_block_group(trans, inode);
-	err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+	err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
 	if (err)
 		drop_inode = 1;
 	else {
@@ -4787,6 +4785,7 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 		return -EPERM;
 
 	btrfs_inc_nlink(inode);
+	inode->i_ctime = CURRENT_TIME;
 
 	err = btrfs_set_inode_index(dir, &index);
 	if (err)
@@ -4805,15 +4804,17 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir,
 	btrfs_set_trans_block_group(trans, dir);
 	ihold(inode);
 
-	err = btrfs_add_nondir(trans, dentry, inode, 1, index);
+	err = btrfs_add_nondir(trans, dir, dentry, inode, 1, index);
 
 	if (err) {
 		drop_inode = 1;
 	} else {
+		struct dentry *parent = dget_parent(dentry);
 		btrfs_update_inode_block_group(trans, dir);
 		err = btrfs_update_inode(trans, root, inode);
 		BUG_ON(err);
-		btrfs_log_new_name(trans, inode, NULL, dentry->d_parent);
+		btrfs_log_new_name(trans, inode, NULL, parent);
+		dput(parent);
 	}
 
 	nr = trans->blocks_used;
@@ -4853,8 +4854,7 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	btrfs_set_trans_block_group(trans, dir);
 
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
-				dentry->d_name.len,
-				dentry->d_parent->d_inode->i_ino, objectid,
+				dentry->d_name.len, dir->i_ino, objectid,
 				BTRFS_I(dir)->block_group, S_IFDIR | mode,
 				&index);
 	if (IS_ERR(inode)) {
@@ -4877,9 +4877,8 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	if (err)
 		goto out_fail;
 
-	err = btrfs_add_link(trans, dentry->d_parent->d_inode,
-				 inode, dentry->d_name.name,
-				 dentry->d_name.len, 0, index);
+	err = btrfs_add_link(trans, dir, inode, dentry->d_name.name,
+			     dentry->d_name.len, 0, index);
 	if (err)
 		goto out_fail;
 
@@ -5535,13 +5534,21 @@ struct btrfs_dio_private {
 	u64 bytes;
 	u32 *csums;
 	void *private;
+
+	/* number of bios pending for this dio */
+	atomic_t pending_bios;
+
+	/* IO errors */
+	int errors;
+
+	struct bio *orig_bio;
 };
 
 static void btrfs_endio_direct_read(struct bio *bio, int err)
 {
+	struct btrfs_dio_private *dip = bio->bi_private;
 	struct bio_vec *bvec_end = bio->bi_io_vec + bio->bi_vcnt - 1;
 	struct bio_vec *bvec = bio->bi_io_vec;
-	struct btrfs_dio_private *dip = bio->bi_private;
 	struct inode *inode = dip->inode;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	u64 start;
@@ -5595,15 +5602,18 @@ static void btrfs_endio_direct_write(struct bio *bio, int err)
 	struct btrfs_trans_handle *trans;
 	struct btrfs_ordered_extent *ordered = NULL;
 	struct extent_state *cached_state = NULL;
+	u64 ordered_offset = dip->logical_offset;
+	u64 ordered_bytes = dip->bytes;
 	int ret;
 
 	if (err)
 		goto out_done;
-
-	ret = btrfs_dec_test_ordered_pending(inode, &ordered,
-					     dip->logical_offset, dip->bytes);
+again:
+	ret = btrfs_dec_test_first_ordered_pending(inode, &ordered,
+						   &ordered_offset,
+						   ordered_bytes);
 	if (!ret)
-		goto out_done;
+		goto out_test;
 
 	BUG_ON(!ordered);
 
@@ -5663,8 +5673,20 @@ out_unlock:
 out:
 	btrfs_delalloc_release_metadata(inode, ordered->len);
 	btrfs_end_transaction(trans, root);
+	ordered_offset = ordered->file_offset + ordered->len;
 	btrfs_put_ordered_extent(ordered);
 	btrfs_put_ordered_extent(ordered);
+
+out_test:
+	/*
+	 * our bio might span multiple ordered extents.  If we haven't
+	 * completed the accounting for the whole dio, go back and try again
+	 */
+	if (ordered_offset < dip->logical_offset + dip->bytes) {
+		ordered_bytes = dip->logical_offset + dip->bytes -
+			ordered_offset;
+		goto again;
+	}
 out_done:
 	bio->bi_private = dip->private;
 
@@ -5684,6 +5706,176 @@ static int __btrfs_submit_bio_start_direct_io(struct inode *inode, int rw,
 	return 0;
 }
 
+static void btrfs_end_dio_bio(struct bio *bio, int err)
+{
+	struct btrfs_dio_private *dip = bio->bi_private;
+
+	if (err) {
+		printk(KERN_ERR "btrfs direct IO failed ino %lu rw %lu "
+		      "sector %#Lx len %u err no %d\n",
+		      dip->inode->i_ino, bio->bi_rw,
+		      (unsigned long long)bio->bi_sector, bio->bi_size, err);
+		dip->errors = 1;
+
+		/*
+		 * before atomic variable goto zero, we must make sure
+		 * dip->errors is perceived to be set.
+		 */
+		smp_mb__before_atomic_dec();
+	}
+
+	/* if there are more bios still pending for this dio, just exit */
+	if (!atomic_dec_and_test(&dip->pending_bios))
+		goto out;
+
+	if (dip->errors)
+		bio_io_error(dip->orig_bio);
+	else {
+		set_bit(BIO_UPTODATE, &dip->orig_bio->bi_flags);
+		bio_endio(dip->orig_bio, 0);
+	}
+out:
+	bio_put(bio);
+}
+
+static struct bio *btrfs_dio_bio_alloc(struct block_device *bdev,
+				       u64 first_sector, gfp_t gfp_flags)
+{
+	int nr_vecs = bio_get_nr_vecs(bdev);
+	return btrfs_bio_alloc(bdev, first_sector, nr_vecs, gfp_flags);
+}
+
+static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode,
+					 int rw, u64 file_offset, int skip_sum,
+					 u32 *csums)
+{
+	int write = rw & REQ_WRITE;
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	int ret;
+
+	bio_get(bio);
+	ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
+	if (ret)
+		goto err;
+
+	if (write && !skip_sum) {
+		ret = btrfs_wq_submit_bio(root->fs_info,
+				   inode, rw, bio, 0, 0,
+				   file_offset,
+				   __btrfs_submit_bio_start_direct_io,
+				   __btrfs_submit_bio_done);
+		goto err;
+	} else if (!skip_sum)
+		btrfs_lookup_bio_sums_dio(root, inode, bio,
+					  file_offset, csums);
+
+	ret = btrfs_map_bio(root, rw, bio, 0, 1);
+err:
+	bio_put(bio);
+	return ret;
+}
+
+static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip,
+				    int skip_sum)
+{
+	struct inode *inode = dip->inode;
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	struct btrfs_mapping_tree *map_tree = &root->fs_info->mapping_tree;
+	struct bio *bio;
+	struct bio *orig_bio = dip->orig_bio;
+	struct bio_vec *bvec = orig_bio->bi_io_vec;
+	u64 start_sector = orig_bio->bi_sector;
+	u64 file_offset = dip->logical_offset;
+	u64 submit_len = 0;
+	u64 map_length;
+	int nr_pages = 0;
+	u32 *csums = dip->csums;
+	int ret = 0;
+
+	bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev, start_sector, GFP_NOFS);
+	if (!bio)
+		return -ENOMEM;
+	bio->bi_private = dip;
+	bio->bi_end_io = btrfs_end_dio_bio;
+	atomic_inc(&dip->pending_bios);
+
+	map_length = orig_bio->bi_size;
+	ret = btrfs_map_block(map_tree, READ, start_sector << 9,
+			      &map_length, NULL, 0);
+	if (ret) {
+		bio_put(bio);
+		return -EIO;
+	}
+
+	while (bvec <= (orig_bio->bi_io_vec + orig_bio->bi_vcnt - 1)) {
+		if (unlikely(map_length < submit_len + bvec->bv_len ||
+		    bio_add_page(bio, bvec->bv_page, bvec->bv_len,
+				 bvec->bv_offset) < bvec->bv_len)) {
+			/*
+			 * inc the count before we submit the bio so
+			 * we know the end IO handler won't happen before
+			 * we inc the count. Otherwise, the dip might get freed
+			 * before we're done setting it up
+			 */
+			atomic_inc(&dip->pending_bios);
+			ret = __btrfs_submit_dio_bio(bio, inode, rw,
+						     file_offset, skip_sum,
+						     csums);
+			if (ret) {
+				bio_put(bio);
+				atomic_dec(&dip->pending_bios);
+				goto out_err;
+			}
+
+			if (!skip_sum)
+				csums = csums + nr_pages;
+			start_sector += submit_len >> 9;
+			file_offset += submit_len;
+
+			submit_len = 0;
+			nr_pages = 0;
+
+			bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev,
+						  start_sector, GFP_NOFS);
+			if (!bio)
+				goto out_err;
+			bio->bi_private = dip;
+			bio->bi_end_io = btrfs_end_dio_bio;
+
+			map_length = orig_bio->bi_size;
+			ret = btrfs_map_block(map_tree, READ, start_sector << 9,
+					      &map_length, NULL, 0);
+			if (ret) {
+				bio_put(bio);
+				goto out_err;
+			}
+		} else {
+			submit_len += bvec->bv_len;
+			nr_pages ++;
+			bvec++;
+		}
+	}
+
+	ret = __btrfs_submit_dio_bio(bio, inode, rw, file_offset, skip_sum,
+				     csums);
+	if (!ret)
+		return 0;
+
+	bio_put(bio);
+out_err:
+	dip->errors = 1;
+	/*
+	 * before atomic variable goto zero, we must
+	 * make sure dip->errors is perceived to be set.
+	 */
+	smp_mb__before_atomic_dec();
+	if (atomic_dec_and_test(&dip->pending_bios))
+		bio_io_error(dip->orig_bio);
+
+	/* bio_end_io() will handle error, so we needn't return it */
+	return 0;
+}
+
 static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
 				loff_t file_offset)
 {
@@ -5723,36 +5915,18 @@ static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
 
 	dip->disk_bytenr = (u64)bio->bi_sector << 9;
 	bio->bi_private = dip;
+	dip->errors = 0;
+	dip->orig_bio = bio;
+	atomic_set(&dip->pending_bios, 0);
 
 	if (write)
 		bio->bi_end_io = btrfs_endio_direct_write;
 	else
 		bio->bi_end_io = btrfs_endio_direct_read;
 
-	ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
-	if (ret)
-		goto out_err;
-
-	if (write && !skip_sum) {
-		ret = btrfs_wq_submit_bio(BTRFS_I(inode)->root->fs_info,
-				   inode, rw, bio, 0, 0,
-				   dip->logical_offset,
-				   __btrfs_submit_bio_start_direct_io,
-				   __btrfs_submit_bio_done);
-		if (ret)
-			goto out_err;
+	ret = btrfs_submit_direct_hook(rw, dip, skip_sum);
+	if (!ret)
 		return;
-	} else if (!skip_sum)
-		btrfs_lookup_bio_sums_dio(root, inode, bio,
-					  dip->logical_offset, dip->csums);
-
-	ret = btrfs_map_bio(root, rw, bio, 0, 1);
-	if (ret)
-		goto out_err;
-	return;
-out_err:
-	kfree(dip->csums);
-	kfree(dip);
 free_ordered:
 	/*
 	 * If this is a write, we need to clean up the reserved space and kill
@@ -5760,8 +5934,7 @@ free_ordered:
 	 */
 	if (write) {
 		struct btrfs_ordered_extent *ordered;
-		ordered = btrfs_lookup_ordered_extent(inode,
-						      dip->logical_offset);
+		ordered = btrfs_lookup_ordered_extent(inode, file_offset);
 		if (!test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags) &&
 		    !test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags))
 			btrfs_free_reserved_extent(root, ordered->start,
@@ -6322,6 +6495,13 @@ struct inode *btrfs_alloc_inode(struct super_block *sb)
 	return inode;
 }
 
+static void btrfs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode));
+}
+
 void btrfs_destroy_inode(struct inode *inode)
 {
 	struct btrfs_ordered_extent *ordered;
@@ -6391,7 +6571,7 @@ void btrfs_destroy_inode(struct inode *inode)
 	inode_tree_del(inode);
 	btrfs_drop_extent_cache(inode, 0, (u64)-1, 0);
 free:
-	kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode));
+	call_rcu(&inode->i_rcu, btrfs_i_callback);
 }
 
 int btrfs_drop_inode(struct inode *inode)
@@ -6607,8 +6787,9 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	BUG_ON(ret);
 
 	if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) {
-		btrfs_log_new_name(trans, old_inode, old_dir,
-				   new_dentry->d_parent);
+		struct dentry *parent = dget_parent(new_dentry);
+		btrfs_log_new_name(trans, old_inode, old_dir, parent);
+		dput(parent);
 		btrfs_end_log_trans(root);
 	}
 out_fail:
@@ -6758,8 +6939,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry,
 	btrfs_set_trans_block_group(trans, dir);
 
 	inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
-				dentry->d_name.len,
-				dentry->d_parent->d_inode->i_ino, objectid,
+				dentry->d_name.len, dir->i_ino, objectid,
 				BTRFS_I(dir)->block_group, S_IFLNK|S_IRWXUGO,
 				&index);
 	err = PTR_ERR(inode);
@@ -6773,7 +6953,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry,
 	}
 
 	btrfs_set_trans_block_group(trans, inode);
-	err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+	err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
 	if (err)
 		drop_inode = 1;
 	else {
@@ -6844,6 +7024,7 @@ static int __btrfs_prealloc_file_range(struct inode *inode, int mode,
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_key ins;
 	u64 cur_offset = start;
+	u64 i_size;
 	int ret = 0;
 	bool own_trans = true;
 
@@ -6885,11 +7066,11 @@ static int __btrfs_prealloc_file_range(struct inode *inode, int mode,
 		    (actual_len > inode->i_size) &&
 		    (cur_offset > inode->i_size)) {
 			if (cur_offset > actual_len)
-				i_size_write(inode, actual_len);
+				i_size = actual_len;
 			else
-				i_size_write(inode, cur_offset);
-			i_size_write(inode, cur_offset);
-			btrfs_ordered_update_i_size(inode, cur_offset, NULL);
+				i_size = cur_offset;
+			i_size_write(inode, i_size);
+			btrfs_ordered_update_i_size(inode, i_size, NULL);
 		}
 
 		ret = btrfs_update_inode(trans, root, inode);
@@ -6943,6 +7124,10 @@ static long btrfs_fallocate(struct inode *inode, int mode,
 	btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start);
 
 	mutex_lock(&inode->i_mutex);
+	ret = inode_newsize_ok(inode, alloc_end);
+	if (ret)
+		goto out;
+
 	if (alloc_start > inode->i_size) {
 		ret = btrfs_cont_expand(inode, alloc_start);
 		if (ret)
@@ -7026,11 +7211,11 @@ static int btrfs_set_page_dirty(struct page *page)
 	return __set_page_dirty_nobuffers(page);
 }
 
-static int btrfs_permission(struct inode *inode, int mask)
+static int btrfs_permission(struct inode *inode, int mask, unsigned int flags)
 {
 	if ((BTRFS_I(inode)->flags & BTRFS_INODE_READONLY) && (mask & MAY_WRITE))
 		return -EACCES;
-	return generic_permission(inode, mask, btrfs_check_acl);
+	return generic_permission(inode, mask, flags, btrfs_check_acl);
 }
 
 static const struct inode_operations btrfs_dir_inode_operations = {
@@ -7139,6 +7324,7 @@ static const struct inode_operations btrfs_symlink_inode_operations = {
 	.readlink	= generic_readlink,
 	.follow_link	= page_follow_link_light,
 	.put_link	= page_put_link,
+	.getattr	= btrfs_getattr,
 	.permission	= btrfs_permission,
 	.setxattr	= btrfs_setxattr,
 	.getxattr	= btrfs_getxattr,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 463d91b4dd3..f87552a1d7e 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -233,7 +233,8 @@ static noinline int create_subvol(struct btrfs_root *root,
 	struct btrfs_inode_item *inode_item;
 	struct extent_buffer *leaf;
 	struct btrfs_root *new_root;
-	struct inode *dir = dentry->d_parent->d_inode;
+	struct dentry *parent = dget_parent(dentry);
+	struct inode *dir;
 	int ret;
 	int err;
 	u64 objectid;
@@ -242,8 +243,13 @@ static noinline int create_subvol(struct btrfs_root *root,
 
 	ret = btrfs_find_free_objectid(NULL, root->fs_info->tree_root,
 				       0, &objectid);
-	if (ret)
+	if (ret) {
+		dput(parent);
 		return ret;
+	}
+
+	dir = parent->d_inode;
+
 	/*
 	 * 1 - inode item
 	 * 2 - refs
@@ -251,8 +257,10 @@ static noinline int create_subvol(struct btrfs_root *root,
 	 * 2 - dir items
 	 */
 	trans = btrfs_start_transaction(root, 6);
-	if (IS_ERR(trans))
+	if (IS_ERR(trans)) {
+		dput(parent);
 		return PTR_ERR(trans);
+	}
 
 	leaf = btrfs_alloc_free_block(trans, root, root->leafsize,
 				      0, objectid, NULL, 0, 0, 0);
@@ -339,6 +347,7 @@ static noinline int create_subvol(struct btrfs_root *root,
 
 	d_instantiate(dentry, btrfs_lookup_dentry(dir, dentry));
 fail:
+	dput(parent);
 	if (async_transid) {
 		*async_transid = trans->transid;
 		err = btrfs_commit_transaction_async(trans, root, 1);
@@ -354,6 +363,7 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry,
 			   char *name, int namelen, u64 *async_transid)
 {
 	struct inode *inode;
+	struct dentry *parent;
 	struct btrfs_pending_snapshot *pending_snapshot;
 	struct btrfs_trans_handle *trans;
 	int ret;
@@ -396,7 +406,9 @@ static int create_snapshot(struct btrfs_root *root, struct dentry *dentry,
 
 	btrfs_orphan_cleanup(pending_snapshot->snap);
 
-	inode = btrfs_lookup_dentry(dentry->d_parent->d_inode, dentry);
+	parent = dget_parent(dentry);
+	inode = btrfs_lookup_dentry(parent->d_inode, dentry);
+	dput(parent);
 	if (IS_ERR(inode)) {
 		ret = PTR_ERR(inode);
 		goto fail;
@@ -935,23 +947,42 @@ out:
 
 static noinline int btrfs_ioctl_snap_create(struct file *file,
 					    void __user *arg, int subvol,
-					    int async)
+					    int v2)
 {
 	struct btrfs_ioctl_vol_args *vol_args = NULL;
-	struct btrfs_ioctl_async_vol_args *async_vol_args = NULL;
+	struct btrfs_ioctl_vol_args_v2 *vol_args_v2 = NULL;
 	char *name;
 	u64 fd;
-	u64 transid = 0;
 	int ret;
 
-	if (async) {
-		async_vol_args = memdup_user(arg, sizeof(*async_vol_args));
-		if (IS_ERR(async_vol_args))
-			return PTR_ERR(async_vol_args);
+	if (v2) {
+		u64 transid = 0;
+		u64 *ptr = NULL;
+
+		vol_args_v2 = memdup_user(arg, sizeof(*vol_args_v2));
+		if (IS_ERR(vol_args_v2))
+			return PTR_ERR(vol_args_v2);
+
+		if (vol_args_v2->flags & ~BTRFS_SUBVOL_CREATE_ASYNC) {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		name = vol_args_v2->name;
+		fd = vol_args_v2->fd;
+		vol_args_v2->name[BTRFS_SUBVOL_NAME_MAX] = '\0';
+
+		if (vol_args_v2->flags & BTRFS_SUBVOL_CREATE_ASYNC)
+			ptr = &transid;
+
+		ret = btrfs_ioctl_snap_create_transid(file, name, fd,
+						      subvol, ptr);
 
-		name = async_vol_args->name;
-		fd = async_vol_args->fd;
-		async_vol_args->name[BTRFS_SNAPSHOT_NAME_MAX] = '\0';
+		if (ret == 0 && ptr &&
+		    copy_to_user(arg +
+				 offsetof(struct btrfs_ioctl_vol_args_v2,
+					  transid), ptr, sizeof(*ptr)))
+			ret = -EFAULT;
 	} else {
 		vol_args = memdup_user(arg, sizeof(*vol_args));
 		if (IS_ERR(vol_args))
@@ -959,20 +990,13 @@ static noinline int btrfs_ioctl_snap_create(struct file *file,
 		name = vol_args->name;
 		fd = vol_args->fd;
 		vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
-	}
-
-	ret = btrfs_ioctl_snap_create_transid(file, name, fd,
-					      subvol, &transid);
 
-	if (!ret && async) {
-		if (copy_to_user(arg +
-				offsetof(struct btrfs_ioctl_async_vol_args,
-				transid), &transid, sizeof(transid)))
-			return -EFAULT;
+		ret = btrfs_ioctl_snap_create_transid(file, name, fd,
+						      subvol, NULL);
 	}
-
+out:
 	kfree(vol_args);
-	kfree(async_vol_args);
+	kfree(vol_args_v2);
 
 	return ret;
 }
@@ -1669,12 +1693,11 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 		olen = len = src->i_size - off;
 	/* if we extend to eof, continue to block boundary */
 	if (off + len == src->i_size)
-		len = ((src->i_size + bs-1) & ~(bs-1))
-			- off;
+		len = ALIGN(src->i_size, bs) - off;
 
 	/* verify the end result is block aligned */
-	if ((off & (bs-1)) ||
-	    ((off + len) & (bs-1)))
+	if (!IS_ALIGNED(off, bs) || !IS_ALIGNED(off + len, bs) ||
+	    !IS_ALIGNED(destoff, bs))
 		goto out_unlock;
 
 	/* do any pending delalloc/csum calc on src, one way or
@@ -1874,8 +1897,8 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
 			 * but shouldn't round up the file size
 			 */
 			endoff = new_key.offset + datal;
-			if (endoff > off+olen)
-				endoff = off+olen;
+			if (endoff > destoff+olen)
+				endoff = destoff+olen;
 			if (endoff > inode->i_size)
 				btrfs_i_size_write(inode, endoff);
 
@@ -2235,7 +2258,7 @@ long btrfs_ioctl(struct file *file, unsigned int
 		return btrfs_ioctl_getversion(file, argp);
 	case BTRFS_IOC_SNAP_CREATE:
 		return btrfs_ioctl_snap_create(file, argp, 0, 0);
-	case BTRFS_IOC_SNAP_CREATE_ASYNC:
+	case BTRFS_IOC_SNAP_CREATE_V2:
 		return btrfs_ioctl_snap_create(file, argp, 0, 1);
 	case BTRFS_IOC_SUBVOL_CREATE:
 		return btrfs_ioctl_snap_create(file, argp, 1, 0);
diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h
index 17c99ebdf96..c344d12c646 100644
--- a/fs/btrfs/ioctl.h
+++ b/fs/btrfs/ioctl.h
@@ -30,11 +30,15 @@ struct btrfs_ioctl_vol_args {
 	char name[BTRFS_PATH_NAME_MAX + 1];
 };
 
-#define BTRFS_SNAPSHOT_NAME_MAX 4079
-struct btrfs_ioctl_async_vol_args {
+#define BTRFS_SUBVOL_CREATE_ASYNC	(1ULL << 0)
+
+#define BTRFS_SUBVOL_NAME_MAX 4039
+struct btrfs_ioctl_vol_args_v2 {
 	__s64 fd;
 	__u64 transid;
-	char name[BTRFS_SNAPSHOT_NAME_MAX + 1];
+	__u64 flags;
+	__u64 unused[4];
+	char name[BTRFS_SUBVOL_NAME_MAX + 1];
 };
 
 #define BTRFS_INO_LOOKUP_PATH_MAX 4080
@@ -187,6 +191,6 @@ struct btrfs_ioctl_space_args {
 				    struct btrfs_ioctl_space_args)
 #define BTRFS_IOC_START_SYNC _IOR(BTRFS_IOCTL_MAGIC, 24, __u64)
 #define BTRFS_IOC_WAIT_SYNC  _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
-#define BTRFS_IOC_SNAP_CREATE_ASYNC _IOW(BTRFS_IOCTL_MAGIC, 23, \
-				   struct btrfs_ioctl_async_vol_args)
+#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
+				   struct btrfs_ioctl_vol_args_v2)
 #endif
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index f4621f6deca..ae7737e352c 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -250,6 +250,73 @@ int btrfs_add_ordered_sum(struct inode *inode,
 
 /*
  * this is used to account for finished IO across a given range
+ * of the file.  The IO may span ordered extents.  If
+ * a given ordered_extent is completely done, 1 is returned, otherwise
+ * 0.
+ *
+ * test_and_set_bit on a flag in the struct btrfs_ordered_extent is used
+ * to make sure this function only returns 1 once for a given ordered extent.
+ *
+ * file_offset is updated to one byte past the range that is recorded as
+ * complete.  This allows you to walk forward in the file.
+ */
+int btrfs_dec_test_first_ordered_pending(struct inode *inode,
+				   struct btrfs_ordered_extent **cached,
+				   u64 *file_offset, u64 io_size)
+{
+	struct btrfs_ordered_inode_tree *tree;
+	struct rb_node *node;
+	struct btrfs_ordered_extent *entry = NULL;
+	int ret;
+	u64 dec_end;
+	u64 dec_start;
+	u64 to_dec;
+
+	tree = &BTRFS_I(inode)->ordered_tree;
+	spin_lock(&tree->lock);
+	node = tree_search(tree, *file_offset);
+	if (!node) {
+		ret = 1;
+		goto out;
+	}
+
+	entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
+	if (!offset_in_entry(entry, *file_offset)) {
+		ret = 1;
+		goto out;
+	}
+
+	dec_start = max(*file_offset, entry->file_offset);
+	dec_end = min(*file_offset + io_size, entry->file_offset +
+		      entry->len);
+	*file_offset = dec_end;
+	if (dec_start > dec_end) {
+		printk(KERN_CRIT "bad ordering dec_start %llu end %llu\n",
+		       (unsigned long long)dec_start,
+		       (unsigned long long)dec_end);
+	}
+	to_dec = dec_end - dec_start;
+	if (to_dec > entry->bytes_left) {
+		printk(KERN_CRIT "bad ordered accounting left %llu size %llu\n",
+		       (unsigned long long)entry->bytes_left,
+		       (unsigned long long)to_dec);
+	}
+	entry->bytes_left -= to_dec;
+	if (entry->bytes_left == 0)
+		ret = test_and_set_bit(BTRFS_ORDERED_IO_DONE, &entry->flags);
+	else
+		ret = 1;
+out:
+	if (!ret && cached && entry) {
+		*cached = entry;
+		atomic_inc(&entry->refs);
+	}
+	spin_unlock(&tree->lock);
+	return ret == 0;
+}
+
+/*
+ * this is used to account for finished IO across a given range
  * of the file.  The IO should not span ordered extents.  If
  * a given ordered_extent is completely done, 1 is returned, otherwise
  * 0.
diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h
index 8ac365492a3..61dca83119d 100644
--- a/fs/btrfs/ordered-data.h
+++ b/fs/btrfs/ordered-data.h
@@ -141,6 +141,9 @@ int btrfs_remove_ordered_extent(struct inode *inode,
 int btrfs_dec_test_ordered_pending(struct inode *inode,
 				   struct btrfs_ordered_extent **cached,
 				   u64 file_offset, u64 io_size);
+int btrfs_dec_test_first_ordered_pending(struct inode *inode,
+				   struct btrfs_ordered_extent **cached,
+				   u64 *file_offset, u64 io_size);
 int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
 			     u64 start, u64 len, u64 disk_len, int type);
 int btrfs_add_ordered_extent_dio(struct inode *inode, u64 file_offset,
diff --git a/fs/btrfs/orphan.c b/fs/btrfs/orphan.c
index 79cba5fbc28..f8be250963a 100644
--- a/fs/btrfs/orphan.c
+++ b/fs/btrfs/orphan.c
@@ -56,8 +56,12 @@ int btrfs_del_orphan_item(struct btrfs_trans_handle *trans,
 		return -ENOMEM;
 
 	ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
-	if (ret)
+	if (ret < 0)
 		goto out;
+	if (ret) {
+		ret = -ENOENT;
+		goto out;
+	}
 
 	ret = btrfs_del_item(trans, root, path);
 
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 8299a25ffc8..883c6fa1367 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -244,6 +244,7 @@ int btrfs_parse_options(struct btrfs_root *root, char *options)
 		case Opt_space_cache:
 			printk(KERN_INFO "btrfs: enabling disk space caching\n");
 			btrfs_set_opt(info->mount_opt, SPACE_CACHE);
+			break;
 		case Opt_clear_cache:
 			printk(KERN_INFO "btrfs: force clearing of disk cache\n");
 			btrfs_set_opt(info->mount_opt, CLEAR_CACHE);
@@ -562,12 +563,26 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 
 static int btrfs_test_super(struct super_block *s, void *data)
 {
-	struct btrfs_fs_devices *test_fs_devices = data;
+	struct btrfs_root *test_root = data;
 	struct btrfs_root *root = btrfs_sb(s);
 
-	return root->fs_info->fs_devices == test_fs_devices;
+	/*
+	 * If this super block is going away, return false as it
+	 * can't match as an existing super block.
+	 */
+	if (!atomic_read(&s->s_active))
+		return 0;
+	return root->fs_info->fs_devices == test_root->fs_info->fs_devices;
+}
+
+static int btrfs_set_super(struct super_block *s, void *data)
+{
+	s->s_fs_info = data;
+
+	return set_anon_super(s, data);
 }
 
+
 /*
  * Find a superblock for the given device / mount point.
  *
@@ -581,6 +596,8 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
 	struct super_block *s;
 	struct dentry *root;
 	struct btrfs_fs_devices *fs_devices = NULL;
+	struct btrfs_root *tree_root = NULL;
+	struct btrfs_fs_info *fs_info = NULL;
 	fmode_t mode = FMODE_READ;
 	char *subvol_name = NULL;
 	u64 subvol_objectid = 0;
@@ -608,8 +625,24 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
 		goto error_close_devices;
 	}
 
+	/*
+	 * Setup a dummy root and fs_info for test/set super.  This is because
+	 * we don't actually fill this stuff out until open_ctree, but we need
+	 * it for searching for existing supers, so this lets us do that and
+	 * then open_ctree will properly initialize everything later.
+	 */
+	fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS);
+	tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+	if (!fs_info || !tree_root) {
+		error = -ENOMEM;
+		goto error_close_devices;
+	}
+	fs_info->tree_root = tree_root;
+	fs_info->fs_devices = fs_devices;
+	tree_root->fs_info = fs_info;
+
 	bdev = fs_devices->latest_bdev;
-	s = sget(fs_type, btrfs_test_super, set_anon_super, fs_devices);
+	s = sget(fs_type, btrfs_test_super, btrfs_set_super, tree_root);
 	if (IS_ERR(s))
 		goto error_s;
 
@@ -652,9 +685,9 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags,
 		mutex_unlock(&root->d_inode->i_mutex);
 
 		if (IS_ERR(new_root)) {
+			dput(root);
 			deactivate_locked_super(s);
 			error = PTR_ERR(new_root);
-			dput(root);
 			goto error_free_subvol_name;
 		}
 		if (!new_root->d_inode) {
@@ -675,6 +708,8 @@ error_s:
 	error = PTR_ERR(s);
 error_close_devices:
 	btrfs_close_devices(fs_devices);
+	kfree(fs_info);
+	kfree(tree_root);
 error_free_subvol_name:
 	kfree(subvol_name);
 	return ERR_PTR(error);
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 1fffbc017bd..f50e931fc21 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -902,6 +902,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 	struct btrfs_root *root = pending->root;
 	struct btrfs_root *parent_root;
 	struct inode *parent_inode;
+	struct dentry *parent;
 	struct dentry *dentry;
 	struct extent_buffer *tmp;
 	struct extent_buffer *old;
@@ -941,7 +942,8 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 	trans->block_rsv = &pending->block_rsv;
 
 	dentry = pending->dentry;
-	parent_inode = dentry->d_parent->d_inode;
+	parent = dget_parent(dentry);
+	parent_inode = parent->d_inode;
 	parent_root = BTRFS_I(parent_inode)->root;
 	record_root_in_trans(trans, parent_root);
 
@@ -989,6 +991,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans,
 				 parent_inode->i_ino, index,
 				 dentry->d_name.name, dentry->d_name.len);
 	BUG_ON(ret);
+	dput(parent);
 
 	key.offset = (u64)-1;
 	pending->snap = btrfs_read_fs_root_no_name(root->fs_info, &key);
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index a29f19384a2..054744ac571 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -2869,6 +2869,7 @@ static noinline int check_parent_dirs_for_sync(struct btrfs_trans_handle *trans,
 {
 	int ret = 0;
 	struct btrfs_root *root;
+	struct dentry *old_parent = NULL;
 
 	/*
 	 * for regular files, if its inode is already on disk, we don't
@@ -2910,10 +2911,13 @@ static noinline int check_parent_dirs_for_sync(struct btrfs_trans_handle *trans,
 		if (IS_ROOT(parent))
 			break;
 
-		parent = parent->d_parent;
+		parent = dget_parent(parent);
+		dput(old_parent);
+		old_parent = parent;
 		inode = parent->d_inode;
 
 	}
+	dput(old_parent);
 out:
 	return ret;
 }
@@ -2945,6 +2949,7 @@ int btrfs_log_inode_parent(struct btrfs_trans_handle *trans,
 {
 	int inode_only = exists_only ? LOG_INODE_EXISTS : LOG_INODE_ALL;
 	struct super_block *sb;
+	struct dentry *old_parent = NULL;
 	int ret = 0;
 	u64 last_committed = root->fs_info->last_trans_committed;
 
@@ -3016,10 +3021,13 @@ int btrfs_log_inode_parent(struct btrfs_trans_handle *trans,
 		if (IS_ROOT(parent))
 			break;
 
-		parent = parent->d_parent;
+		parent = dget_parent(parent);
+		dput(old_parent);
+		old_parent = parent;
 	}
 	ret = 0;
 end_trans:
+	dput(old_parent);
 	if (ret < 0) {
 		BUG_ON(ret != -ENOSPC);
 		root->fs_info->last_trans_log_full_commit = trans->transid;
@@ -3039,8 +3047,13 @@ end_no_trans:
 int btrfs_log_dentry_safe(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *root, struct dentry *dentry)
 {
-	return btrfs_log_inode_parent(trans, root, dentry->d_inode,
-				      dentry->d_parent, 0);
+	struct dentry *parent = dget_parent(dentry);
+	int ret;
+
+	ret = btrfs_log_inode_parent(trans, root, dentry->d_inode, parent, 0);
+	dput(parent);
+
+	return ret;
 }
 
 /*
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index cc04dc1445d..6b988450783 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -412,12 +412,16 @@ static noinline int device_list_add(const char *path,
 
 		device->fs_devices = fs_devices;
 		fs_devices->num_devices++;
-	} else if (strcmp(device->name, path)) {
+	} else if (!device->name || strcmp(device->name, path)) {
 		name = kstrdup(path, GFP_NOFS);
 		if (!name)
 			return -ENOMEM;
 		kfree(device->name);
 		device->name = name;
+		if (device->missing) {
+			fs_devices->missing_devices--;
+			device->missing = 0;
+		}
 	}
 
 	if (found_transid > fs_devices->latest_trans) {
@@ -1236,6 +1240,9 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path)
 
 	device->fs_devices->num_devices--;
 
+	if (device->missing)
+		root->fs_info->fs_devices->missing_devices--;
+
 	next_device = list_entry(root->fs_info->fs_devices->devices.next,
 				 struct btrfs_device, dev_list);
 	if (device->bdev == root->fs_info->sb->s_bdev)
@@ -3080,7 +3087,9 @@ static struct btrfs_device *add_missing_dev(struct btrfs_root *root,
 	device->devid = devid;
 	device->work.func = pending_bios_fn;
 	device->fs_devices = fs_devices;
+	device->missing = 1;
 	fs_devices->num_devices++;
+	fs_devices->missing_devices++;
 	spin_lock_init(&device->io_lock);
 	INIT_LIST_HEAD(&device->dev_alloc_list);
 	memcpy(device->uuid, dev_uuid, BTRFS_UUID_SIZE);
@@ -3278,6 +3287,15 @@ static int read_one_dev(struct btrfs_root *root,
 			device = add_missing_dev(root, devid, dev_uuid);
 			if (!device)
 				return -ENOMEM;
+		} else if (!device->missing) {
+			/*
+			 * this happens when a device that was properly setup
+			 * in the device info lists suddenly goes bad.
+			 * device->bdev is NULL, and so we have to set
+			 * device->missing to one here
+			 */
+			root->fs_info->fs_devices->missing_devices++;
+			device->missing = 1;
 		}
 	}
 
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index 2b638b6e4ee..2740db49eb0 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -44,6 +44,7 @@ struct btrfs_device {
 
 	int writeable;
 	int in_fs_metadata;
+	int missing;
 
 	spinlock_t io_lock;
 
@@ -93,6 +94,7 @@ struct btrfs_fs_devices {
 	u64 num_devices;
 	u64 open_devices;
 	u64 rw_devices;
+	u64 missing_devices;
 	u64 total_rw_bytes;
 	struct block_device *latest_bdev;
 
diff --git a/fs/buffer.c b/fs/buffer.c
index 5930e382959..2219a76e2ca 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1270,12 +1270,10 @@ static inline void check_irqs_on(void)
 static void bh_lru_install(struct buffer_head *bh)
 {
 	struct buffer_head *evictee = NULL;
-	struct bh_lru *lru;
 
 	check_irqs_on();
 	bh_lru_lock();
-	lru = &__get_cpu_var(bh_lrus);
-	if (lru->bhs[0] != bh) {
+	if (__this_cpu_read(bh_lrus.bhs[0]) != bh) {
 		struct buffer_head *bhs[BH_LRU_SIZE];
 		int in;
 		int out = 0;
@@ -1283,7 +1281,8 @@ static void bh_lru_install(struct buffer_head *bh)
 		get_bh(bh);
 		bhs[out++] = bh;
 		for (in = 0; in < BH_LRU_SIZE; in++) {
-			struct buffer_head *bh2 = lru->bhs[in];
+			struct buffer_head *bh2 =
+				__this_cpu_read(bh_lrus.bhs[in]);
 
 			if (bh2 == bh) {
 				__brelse(bh2);
@@ -1298,7 +1297,7 @@ static void bh_lru_install(struct buffer_head *bh)
 		}
 		while (out < BH_LRU_SIZE)
 			bhs[out++] = NULL;
-		memcpy(lru->bhs, bhs, sizeof(bhs));
+		memcpy(__this_cpu_ptr(&bh_lrus.bhs), bhs, sizeof(bhs));
 	}
 	bh_lru_unlock();
 
@@ -1313,23 +1312,22 @@ static struct buffer_head *
 lookup_bh_lru(struct block_device *bdev, sector_t block, unsigned size)
 {
 	struct buffer_head *ret = NULL;
-	struct bh_lru *lru;
 	unsigned int i;
 
 	check_irqs_on();
 	bh_lru_lock();
-	lru = &__get_cpu_var(bh_lrus);
 	for (i = 0; i < BH_LRU_SIZE; i++) {
-		struct buffer_head *bh = lru->bhs[i];
+		struct buffer_head *bh = __this_cpu_read(bh_lrus.bhs[i]);
 
 		if (bh && bh->b_bdev == bdev &&
 				bh->b_blocknr == block && bh->b_size == size) {
 			if (i) {
 				while (i) {
-					lru->bhs[i] = lru->bhs[i - 1];
+					__this_cpu_write(bh_lrus.bhs[i],
+						__this_cpu_read(bh_lrus.bhs[i - 1]));
 					i--;
 				}
-				lru->bhs[0] = bh;
+				__this_cpu_write(bh_lrus.bhs[0], bh);
 			}
 			get_bh(bh);
 			ret = bh;
@@ -3203,22 +3201,23 @@ static void recalc_bh_state(void)
 	int i;
 	int tot = 0;
 
-	if (__get_cpu_var(bh_accounting).ratelimit++ < 4096)
+	if (__this_cpu_inc_return(bh_accounting.ratelimit) - 1 < 4096)
 		return;
-	__get_cpu_var(bh_accounting).ratelimit = 0;
+	__this_cpu_write(bh_accounting.ratelimit, 0);
 	for_each_online_cpu(i)
 		tot += per_cpu(bh_accounting, i).nr;
 	buffer_heads_over_limit = (tot > max_buffer_heads);
 }
-	
+
 struct buffer_head *alloc_buffer_head(gfp_t gfp_flags)
 {
 	struct buffer_head *ret = kmem_cache_zalloc(bh_cachep, gfp_flags);
 	if (ret) {
 		INIT_LIST_HEAD(&ret->b_assoc_buffers);
-		get_cpu_var(bh_accounting).nr++;
+		preempt_disable();
+		__this_cpu_inc(bh_accounting.nr);
 		recalc_bh_state();
-		put_cpu_var(bh_accounting);
+		preempt_enable();
 	}
 	return ret;
 }
@@ -3228,9 +3227,10 @@ void free_buffer_head(struct buffer_head *bh)
 {
 	BUG_ON(!list_empty(&bh->b_assoc_buffers));
 	kmem_cache_free(bh_cachep, bh);
-	get_cpu_var(bh_accounting).nr--;
+	preempt_disable();
+	__this_cpu_dec(bh_accounting.nr);
 	recalc_bh_state();
-	put_cpu_var(bh_accounting);
+	preempt_enable();
 }
 EXPORT_SYMBOL(free_buffer_head);
 
@@ -3243,9 +3243,8 @@ static void buffer_exit_cpu(int cpu)
 		brelse(b->bhs[i]);
 		b->bhs[i] = NULL;
 	}
-	get_cpu_var(bh_accounting).nr += per_cpu(bh_accounting, cpu).nr;
+	this_cpu_add(bh_accounting.nr, per_cpu(bh_accounting, cpu).nr);
 	per_cpu(bh_accounting, cpu).nr = 0;
-	put_cpu_var(bh_accounting);
 }
 
 static int buffer_cpu_notify(struct notifier_block *self,
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index e9c874abc9e..561438b6a50 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -204,7 +204,7 @@ static int readpage_nounlock(struct file *filp, struct page *page)
 	err = ceph_osdc_readpages(osdc, ceph_vino(inode), &ci->i_layout,
 				  page->index << PAGE_CACHE_SHIFT, &len,
 				  ci->i_truncate_seq, ci->i_truncate_size,
-				  &page, 1);
+				  &page, 1, 0);
 	if (err == -ENOENT)
 		err = 0;
 	if (err < 0) {
@@ -287,7 +287,7 @@ static int ceph_readpages(struct file *file, struct address_space *mapping,
 	rc = ceph_osdc_readpages(osdc, ceph_vino(inode), &ci->i_layout,
 				 offset, &len,
 				 ci->i_truncate_seq, ci->i_truncate_size,
-				 pages, nr_pages);
+				 pages, nr_pages, 0);
 	if (rc == -ENOENT)
 		rc = 0;
 	if (rc < 0)
@@ -774,7 +774,7 @@ get_more_pages:
 					    snapc, do_sync,
 					    ci->i_truncate_seq,
 					    ci->i_truncate_size,
-					    &inode->i_mtime, true, 1);
+					    &inode->i_mtime, true, 1, 0);
 				max_pages = req->r_num_pages;
 
 				alloc_page_vec(fsc, req);
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 98ab13e2b71..60d27bc9eb8 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -1430,8 +1430,8 @@ static int try_nonblocking_invalidate(struct inode *inode)
 	    invalidating_gen == ci->i_rdcache_gen) {
 		/* success. */
 		dout("try_nonblocking_invalidate %p success\n", inode);
-		ci->i_rdcache_gen = 0;
-		ci->i_rdcache_revoking = 0;
+		/* save any racing async invalidate some trouble */
+		ci->i_rdcache_revoking = ci->i_rdcache_gen - 1;
 		return 0;
 	}
 	dout("try_nonblocking_invalidate %p failed\n", inode);
@@ -2273,8 +2273,7 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	int mds = session->s_mds;
-	unsigned seq = le32_to_cpu(grant->seq);
-	unsigned issue_seq = le32_to_cpu(grant->issue_seq);
+	int seq = le32_to_cpu(grant->seq);
 	int newcaps = le32_to_cpu(grant->caps);
 	int issued, implemented, used, wanted, dirty;
 	u64 size = le64_to_cpu(grant->size);
@@ -2286,8 +2285,8 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
 	int revoked_rdcache = 0;
 	int queue_invalidate = 0;
 
-	dout("handle_cap_grant inode %p cap %p mds%d seq %u/%u %s\n",
-	     inode, cap, mds, seq, issue_seq, ceph_cap_string(newcaps));
+	dout("handle_cap_grant inode %p cap %p mds%d seq %d %s\n",
+	     inode, cap, mds, seq, ceph_cap_string(newcaps));
 	dout(" size %llu max_size %llu, i_size %llu\n", size, max_size,
 		inode->i_size);
 
@@ -2383,7 +2382,6 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant,
 	}
 
 	cap->seq = seq;
-	cap->issue_seq = issue_seq;
 
 	/* file layout may have changed */
 	ci->i_layout = grant->layout;
@@ -2691,6 +2689,11 @@ static void handle_cap_import(struct ceph_mds_client *mdsc,
 		     NULL /* no caps context */);
 	try_flush_caps(inode, session, NULL);
 	up_read(&mdsc->snap_rwsem);
+
+	/* make sure we re-request max_size, if necessary */
+	spin_lock(&inode->i_lock);
+	ci->i_requested_max_size = 0;
+	spin_unlock(&inode->i_lock);
 }
 
 /*
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index e0a2dc6fcaf..fa7ca04ee81 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -40,12 +40,13 @@ int ceph_init_dentry(struct dentry *dentry)
 	if (dentry->d_fsdata)
 		return 0;
 
-	if (ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP)
-		dentry->d_op = &ceph_dentry_ops;
+	if (dentry->d_parent == NULL ||   /* nfs fh_to_dentry */
+	    ceph_snap(dentry->d_parent->d_inode) == CEPH_NOSNAP)
+		d_set_d_op(dentry, &ceph_dentry_ops);
 	else if (ceph_snap(dentry->d_parent->d_inode) == CEPH_SNAPDIR)
-		dentry->d_op = &ceph_snapdir_dentry_ops;
+		d_set_d_op(dentry, &ceph_snapdir_dentry_ops);
 	else
-		dentry->d_op = &ceph_snap_dentry_ops;
+		d_set_d_op(dentry, &ceph_snap_dentry_ops);
 
 	di = kmem_cache_alloc(ceph_dentry_cachep, GFP_NOFS | __GFP_ZERO);
 	if (!di)
@@ -111,11 +112,11 @@ static int __dcache_readdir(struct file *filp,
 	dout("__dcache_readdir %p at %llu (last %p)\n", dir, filp->f_pos,
 	     last);
 
-	spin_lock(&dcache_lock);
+	spin_lock(&parent->d_lock);
 
 	/* start at beginning? */
-	if (filp->f_pos == 2 || (last &&
-				 filp->f_pos < ceph_dentry(last)->offset)) {
+	if (filp->f_pos == 2 || last == NULL ||
+	    filp->f_pos < ceph_dentry(last)->offset) {
 		if (list_empty(&parent->d_subdirs))
 			goto out_unlock;
 		p = parent->d_subdirs.prev;
@@ -135,6 +136,7 @@ more:
 			fi->at_end = 1;
 			goto out_unlock;
 		}
+		spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
 		if (!d_unhashed(dentry) && dentry->d_inode &&
 		    ceph_snap(dentry->d_inode) != CEPH_SNAPDIR &&
 		    ceph_ino(dentry->d_inode) != CEPH_INO_CEPH &&
@@ -144,13 +146,15 @@ more:
 		     dentry->d_name.len, dentry->d_name.name, di->offset,
 		     filp->f_pos, d_unhashed(dentry) ? " unhashed" : "",
 		     !dentry->d_inode ? " null" : "");
+		spin_unlock(&dentry->d_lock);
 		p = p->prev;
 		dentry = list_entry(p, struct dentry, d_u.d_child);
 		di = ceph_dentry(dentry);
 	}
 
-	atomic_inc(&dentry->d_count);
-	spin_unlock(&dcache_lock);
+	dget_dlock(dentry);
+	spin_unlock(&dentry->d_lock);
+	spin_unlock(&parent->d_lock);
 
 	dout(" %llu (%llu) dentry %p %.*s %p\n", di->offset, filp->f_pos,
 	     dentry, dentry->d_name.len, dentry->d_name.name, dentry->d_inode);
@@ -176,19 +180,19 @@ more:
 
 	filp->f_pos++;
 
-	/* make sure a dentry wasn't dropped while we didn't have dcache_lock */
+	/* make sure a dentry wasn't dropped while we didn't have parent lock */
 	if (!ceph_i_test(dir, CEPH_I_COMPLETE)) {
 		dout(" lost I_COMPLETE on %p; falling back to mds\n", dir);
 		err = -EAGAIN;
 		goto out;
 	}
 
-	spin_lock(&dcache_lock);
+	spin_lock(&parent->d_lock);
 	p = p->prev;	/* advance to next dentry */
 	goto more;
 
 out_unlock:
-	spin_unlock(&dcache_lock);
+	spin_unlock(&parent->d_lock);
 out:
 	if (last)
 		dput(last);
@@ -336,7 +340,10 @@ more:
 		if (req->r_reply_info.dir_end) {
 			kfree(fi->last_name);
 			fi->last_name = NULL;
-			fi->next_offset = 2;
+			if (ceph_frag_is_rightmost(frag))
+				fi->next_offset = 2;
+			else
+				fi->next_offset = 0;
 		} else {
 			rinfo = &req->r_reply_info;
 			err = note_last_dentry(fi,
@@ -355,18 +362,22 @@ more:
 		u64 pos = ceph_make_fpos(frag, off);
 		struct ceph_mds_reply_inode *in =
 			rinfo->dir_in[off - fi->offset].in;
+		struct ceph_vino vino;
+		ino_t ino;
+
 		dout("readdir off %d (%d/%d) -> %lld '%.*s' %p\n",
 		     off, off - fi->offset, rinfo->dir_nr, pos,
 		     rinfo->dir_dname_len[off - fi->offset],
 		     rinfo->dir_dname[off - fi->offset], in);
 		BUG_ON(!in);
 		ftype = le32_to_cpu(in->mode) >> 12;
+		vino.ino = le64_to_cpu(in->ino);
+		vino.snap = le64_to_cpu(in->snapid);
+		ino = ceph_vino_to_ino(vino);
 		if (filldir(dirent,
 			    rinfo->dir_dname[off - fi->offset],
 			    rinfo->dir_dname_len[off - fi->offset],
-			    pos,
-			    le64_to_cpu(in->ino),
-			    ftype) < 0) {
+			    pos, ino, ftype) < 0) {
 			dout("filldir stopping us...\n");
 			return 0;
 		}
@@ -414,6 +425,7 @@ static void reset_readdir(struct ceph_file_info *fi)
 		fi->last_readdir = NULL;
 	}
 	kfree(fi->last_name);
+	fi->last_name = NULL;
 	fi->next_offset = 2;  /* compensate for . and .. */
 	if (fi->dentry) {
 		dput(fi->dentry);
@@ -978,7 +990,12 @@ static int dir_lease_is_valid(struct inode *dir, struct dentry *dentry)
  */
 static int ceph_d_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct inode *dir = dentry->d_parent->d_inode;
+	struct inode *dir;
+
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	dir = dentry->d_parent->d_inode;
 
 	dout("d_revalidate %p '%.*s' inode %p offset %lld\n", dentry,
 	     dentry->d_name.len, dentry->d_name.name, dentry->d_inode,
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index e77c28cf369..7d0e4a82d89 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -154,11 +154,13 @@ int ceph_open(struct inode *inode, struct file *file)
 	}
 
 	/*
-	 * No need to block if we have any caps.  Update wanted set
+	 * No need to block if we have caps on the auth MDS (for
+	 * write) or any MDS (for read).  Update wanted set
 	 * asynchronously.
 	 */
 	spin_lock(&inode->i_lock);
-	if (__ceph_is_any_real_caps(ci)) {
+	if (__ceph_is_any_real_caps(ci) &&
+	    (((fmode & CEPH_FILE_MODE_WR) == 0) || ci->i_auth_cap)) {
 		int mds_wanted = __ceph_caps_mds_wanted(ci);
 		int issued = __ceph_caps_issued(ci, NULL);
 
@@ -280,11 +282,13 @@ int ceph_release(struct inode *inode, struct file *file)
 static int striped_read(struct inode *inode,
 			u64 off, u64 len,
 			struct page **pages, int num_pages,
-			int *checkeof)
+			int *checkeof, bool align_to_pages,
+			unsigned long buf_align)
 {
 	struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	u64 pos, this_len;
+	int io_align, page_align;
 	int page_off = off & ~PAGE_CACHE_MASK; /* first byte's offset in page */
 	int left, pages_left;
 	int read;
@@ -300,14 +304,19 @@ static int striped_read(struct inode *inode,
 	page_pos = pages;
 	pages_left = num_pages;
 	read = 0;
+	io_align = off & ~PAGE_MASK;
 
 more:
+	if (align_to_pages)
+		page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
+	else
+		page_align = pos & ~PAGE_MASK;
 	this_len = left;
 	ret = ceph_osdc_readpages(&fsc->client->osdc, ceph_vino(inode),
 				  &ci->i_layout, pos, &this_len,
 				  ci->i_truncate_seq,
 				  ci->i_truncate_size,
-				  page_pos, pages_left);
+				  page_pos, pages_left, page_align);
 	hit_stripe = this_len < left;
 	was_short = ret >= 0 && ret < this_len;
 	if (ret == -ENOENT)
@@ -368,32 +377,34 @@ static ssize_t ceph_sync_read(struct file *file, char __user *data,
 	struct inode *inode = file->f_dentry->d_inode;
 	struct page **pages;
 	u64 off = *poff;
-	int num_pages = calc_pages_for(off, len);
-	int ret;
+	int num_pages, ret;
 
 	dout("sync_read on file %p %llu~%u %s\n", file, off, len,
 	     (file->f_flags & O_DIRECT) ? "O_DIRECT" : "");
 
 	if (file->f_flags & O_DIRECT) {
-		pages = ceph_get_direct_page_vector(data, num_pages, off, len);
-
-		/*
-		 * flush any page cache pages in this range.  this
-		 * will make concurrent normal and O_DIRECT io slow,
-		 * but it will at least behave sensibly when they are
-		 * in sequence.
-		 */
+		num_pages = calc_pages_for((unsigned long)data, len);
+		pages = ceph_get_direct_page_vector(data, num_pages, true);
 	} else {
+		num_pages = calc_pages_for(off, len);
 		pages = ceph_alloc_page_vector(num_pages, GFP_NOFS);
 	}
 	if (IS_ERR(pages))
 		return PTR_ERR(pages);
 
+	/*
+	 * flush any page cache pages in this range.  this
+	 * will make concurrent normal and sync io slow,
+	 * but it will at least behave sensibly when they are
+	 * in sequence.
+	 */
 	ret = filemap_write_and_wait(inode->i_mapping);
 	if (ret < 0)
 		goto done;
 
-	ret = striped_read(inode, off, len, pages, num_pages, checkeof);
+	ret = striped_read(inode, off, len, pages, num_pages, checkeof,
+			   file->f_flags & O_DIRECT,
+			   (unsigned long)data & ~PAGE_MASK);
 
 	if (ret >= 0 && (file->f_flags & O_DIRECT) == 0)
 		ret = ceph_copy_page_vector_to_user(pages, data, off, ret);
@@ -402,7 +413,7 @@ static ssize_t ceph_sync_read(struct file *file, char __user *data,
 
 done:
 	if (file->f_flags & O_DIRECT)
-		ceph_put_page_vector(pages, num_pages);
+		ceph_put_page_vector(pages, num_pages, true);
 	else
 		ceph_release_page_vector(pages, num_pages);
 	dout("sync_read result %d\n", ret);
@@ -448,6 +459,8 @@ static ssize_t ceph_sync_write(struct file *file, const char __user *data,
 	int flags;
 	int do_sync = 0;
 	int check_caps = 0;
+	int page_align, io_align;
+	unsigned long buf_align;
 	int ret;
 	struct timespec mtime = CURRENT_TIME;
 
@@ -462,6 +475,9 @@ static ssize_t ceph_sync_write(struct file *file, const char __user *data,
 	else
 		pos = *offset;
 
+	io_align = pos & ~PAGE_MASK;
+	buf_align = (unsigned long)data & ~PAGE_MASK;
+
 	ret = filemap_write_and_wait_range(inode->i_mapping, pos, pos + left);
 	if (ret < 0)
 		return ret;
@@ -486,20 +502,27 @@ static ssize_t ceph_sync_write(struct file *file, const char __user *data,
 	 */
 more:
 	len = left;
+	if (file->f_flags & O_DIRECT) {
+		/* write from beginning of first page, regardless of
+		   io alignment */
+		page_align = (pos - io_align + buf_align) & ~PAGE_MASK;
+		num_pages = calc_pages_for((unsigned long)data, len);
+	} else {
+		page_align = pos & ~PAGE_MASK;
+		num_pages = calc_pages_for(pos, len);
+	}
 	req = ceph_osdc_new_request(&fsc->client->osdc, &ci->i_layout,
 				    ceph_vino(inode), pos, &len,
 				    CEPH_OSD_OP_WRITE, flags,
 				    ci->i_snap_realm->cached_context,
 				    do_sync,
 				    ci->i_truncate_seq, ci->i_truncate_size,
-				    &mtime, false, 2);
+				    &mtime, false, 2, page_align);
 	if (!req)
 		return -ENOMEM;
 
-	num_pages = calc_pages_for(pos, len);
-
 	if (file->f_flags & O_DIRECT) {
-		pages = ceph_get_direct_page_vector(data, num_pages, pos, len);
+		pages = ceph_get_direct_page_vector(data, num_pages, false);
 		if (IS_ERR(pages)) {
 			ret = PTR_ERR(pages);
 			goto out;
@@ -549,7 +572,7 @@ more:
 	}
 
 	if (file->f_flags & O_DIRECT)
-		ceph_put_page_vector(pages, num_pages);
+		ceph_put_page_vector(pages, num_pages, false);
 	else if (file->f_flags & O_SYNC)
 		ceph_release_page_vector(pages, num_pages);
 
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 1d6a45b5a04..e61de4f7b99 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -2,7 +2,6 @@
 
 #include <linux/module.h>
 #include <linux/fs.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <linux/string.h>
 #include <linux/uaccess.h>
@@ -369,6 +368,15 @@ struct inode *ceph_alloc_inode(struct super_block *sb)
 	return &ci->vfs_inode;
 }
 
+static void ceph_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	struct ceph_inode_info *ci = ceph_inode(inode);
+
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(ceph_inode_cachep, ci);
+}
+
 void ceph_destroy_inode(struct inode *inode)
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
@@ -408,7 +416,7 @@ void ceph_destroy_inode(struct inode *inode)
 	if (ci->i_xattrs.prealloc_blob)
 		ceph_buffer_put(ci->i_xattrs.prealloc_blob);
 
-	kmem_cache_free(ceph_inode_cachep, ci);
+	call_rcu(&inode->i_rcu, ceph_i_callback);
 }
 
 
@@ -471,7 +479,9 @@ void ceph_fill_file_time(struct inode *inode, int issued,
 
 	if (issued & (CEPH_CAP_FILE_EXCL|
 		      CEPH_CAP_FILE_WR|
-		      CEPH_CAP_FILE_BUFFER)) {
+		      CEPH_CAP_FILE_BUFFER|
+		      CEPH_CAP_AUTH_EXCL|
+		      CEPH_CAP_XATTR_EXCL)) {
 		if (timespec_compare(ctime, &inode->i_ctime) > 0) {
 			dout("ctime %ld.%09ld -> %ld.%09ld inc w/ cap\n",
 			     inode->i_ctime.tv_sec, inode->i_ctime.tv_nsec,
@@ -511,7 +521,7 @@ void ceph_fill_file_time(struct inode *inode, int issued,
 			warn = 1;
 		}
 	} else {
-		/* we have no write caps; whatever the MDS says is true */
+		/* we have no write|excl caps; whatever the MDS says is true */
 		if (ceph_seq_cmp(time_warp_seq, ci->i_time_warp_seq) >= 0) {
 			inode->i_ctime = *ctime;
 			inode->i_mtime = *mtime;
@@ -567,12 +577,17 @@ static int fill_inode(struct inode *inode,
 
 	/*
 	 * provided version will be odd if inode value is projected,
-	 * even if stable.  skip the update if we have a newer info
-	 * (e.g., due to inode info racing form multiple MDSs), or if
-	 * we are getting projected (unstable) inode info.
+	 * even if stable.  skip the update if we have newer stable
+	 * info (ours>=theirs, e.g. due to racing mds replies), unless
+	 * we are getting projected (unstable) info (in which case the
+	 * version is odd, and we want ours>theirs).
+	 *   us   them
+	 *   2    2     skip
+	 *   3    2     skip
+	 *   3    3     update
 	 */
 	if (le64_to_cpu(info->version) > 0 &&
-	    (ci->i_version & ~1) > le64_to_cpu(info->version))
+	    (ci->i_version & ~1) >= le64_to_cpu(info->version))
 		goto no_change;
 
 	issued = __ceph_caps_issued(ci, &implemented);
@@ -606,7 +621,14 @@ static int fill_inode(struct inode *inode,
 			    le32_to_cpu(info->time_warp_seq),
 			    &ctime, &mtime, &atime);
 
-	ci->i_max_size = le64_to_cpu(info->max_size);
+	/* only update max_size on auth cap */
+	if ((info->cap.flags & CEPH_CAP_FLAG_AUTH) &&
+	    ci->i_max_size != le64_to_cpu(info->max_size)) {
+		dout("max_size %lld -> %llu\n", ci->i_max_size,
+		     le64_to_cpu(info->max_size));
+		ci->i_max_size = le64_to_cpu(info->max_size);
+	}
+
 	ci->i_layout = info->layout;
 	inode->i_blkbits = fls(le32_to_cpu(info->layout.fl_stripe_unit)) - 1;
 
@@ -828,13 +850,13 @@ static void ceph_set_dentry_offset(struct dentry *dn)
 	di->offset = ceph_inode(inode)->i_max_offset++;
 	spin_unlock(&inode->i_lock);
 
-	spin_lock(&dcache_lock);
-	spin_lock(&dn->d_lock);
+	spin_lock(&dir->d_lock);
+	spin_lock_nested(&dn->d_lock, DENTRY_D_LOCK_NESTED);
 	list_move(&dn->d_u.d_child, &dir->d_subdirs);
 	dout("set_dentry_offset %p %lld (%p %p)\n", dn, di->offset,
 	     dn->d_u.d_child.prev, dn->d_u.d_child.next);
 	spin_unlock(&dn->d_lock);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dir->d_lock);
 }
 
 /*
@@ -866,8 +888,8 @@ static struct dentry *splice_dentry(struct dentry *dn, struct inode *in,
 	} else if (realdn) {
 		dout("dn %p (%d) spliced with %p (%d) "
 		     "inode %p ino %llx.%llx\n",
-		     dn, atomic_read(&dn->d_count),
-		     realdn, atomic_read(&realdn->d_count),
+		     dn, dn->d_count,
+		     realdn, realdn->d_count,
 		     realdn->d_inode, ceph_vinop(realdn->d_inode));
 		dput(dn);
 		dn = realdn;
@@ -1055,7 +1077,8 @@ int ceph_fill_trace(struct super_block *sb, struct ceph_mds_request *req,
 		ininfo = rinfo->targeti.in;
 		vino.ino = le64_to_cpu(ininfo->ino);
 		vino.snap = le64_to_cpu(ininfo->snapid);
-		if (!dn->d_inode) {
+		in = dn->d_inode;
+		if (!in) {
 			in = ceph_get_inode(sb, vino);
 			if (IS_ERR(in)) {
 				pr_err("fill_trace bad get_inode "
@@ -1217,11 +1240,11 @@ retry_lookup:
 			goto retry_lookup;
 		} else {
 			/* reorder parent's d_subdirs */
-			spin_lock(&dcache_lock);
-			spin_lock(&dn->d_lock);
+			spin_lock(&parent->d_lock);
+			spin_lock_nested(&dn->d_lock, DENTRY_D_LOCK_NESTED);
 			list_move(&dn->d_u.d_child, &parent->d_subdirs);
 			spin_unlock(&dn->d_lock);
-			spin_unlock(&dcache_lock);
+			spin_unlock(&parent->d_lock);
 		}
 
 		di = dn->d_fsdata;
@@ -1386,11 +1409,8 @@ static void ceph_invalidate_work(struct work_struct *work)
 	spin_lock(&inode->i_lock);
 	dout("invalidate_pages %p gen %d revoking %d\n", inode,
 	     ci->i_rdcache_gen, ci->i_rdcache_revoking);
-	if (ci->i_rdcache_gen == 0 ||
-	    ci->i_rdcache_revoking != ci->i_rdcache_gen) {
-		BUG_ON(ci->i_rdcache_revoking > ci->i_rdcache_gen);
+	if (ci->i_rdcache_revoking != ci->i_rdcache_gen) {
 		/* nevermind! */
-		ci->i_rdcache_revoking = 0;
 		spin_unlock(&inode->i_lock);
 		goto out;
 	}
@@ -1400,15 +1420,16 @@ static void ceph_invalidate_work(struct work_struct *work)
 	ceph_invalidate_nondirty_pages(inode->i_mapping);
 
 	spin_lock(&inode->i_lock);
-	if (orig_gen == ci->i_rdcache_gen) {
+	if (orig_gen == ci->i_rdcache_gen &&
+	    orig_gen == ci->i_rdcache_revoking) {
 		dout("invalidate_pages %p gen %d successful\n", inode,
 		     ci->i_rdcache_gen);
-		ci->i_rdcache_gen = 0;
-		ci->i_rdcache_revoking = 0;
+		ci->i_rdcache_revoking--;
 		check = 1;
 	} else {
-		dout("invalidate_pages %p gen %d raced, gen now %d\n",
-		     inode, orig_gen, ci->i_rdcache_gen);
+		dout("invalidate_pages %p gen %d raced, now %d revoking %d\n",
+		     inode, orig_gen, ci->i_rdcache_gen,
+		     ci->i_rdcache_revoking);
 	}
 	spin_unlock(&inode->i_lock);
 
@@ -1739,7 +1760,7 @@ int ceph_do_getattr(struct inode *inode, int mask)
 		return 0;
 	}
 
-	dout("do_getattr inode %p mask %s\n", inode, ceph_cap_string(mask));
+	dout("do_getattr inode %p mask %s mode 0%o\n", inode, ceph_cap_string(mask), inode->i_mode);
 	if (ceph_caps_issued_mask(ceph_inode(inode), mask, 1))
 		return 0;
 
@@ -1760,12 +1781,17 @@ int ceph_do_getattr(struct inode *inode, int mask)
  * Check inode permissions.  We verify we have a valid value for
  * the AUTH cap, then call the generic handler.
  */
-int ceph_permission(struct inode *inode, int mask)
+int ceph_permission(struct inode *inode, int mask, unsigned int flags)
 {
-	int err = ceph_do_getattr(inode, CEPH_CAP_AUTH_SHARED);
+	int err;
+
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
+	err = ceph_do_getattr(inode, CEPH_CAP_AUTH_SHARED);
 
 	if (!err)
-		err = generic_permission(inode, mask, NULL);
+		err = generic_permission(inode, mask, flags, NULL);
 	return err;
 }
 
diff --git a/fs/ceph/ioctl.h b/fs/ceph/ioctl.h
index a6ce54e94eb..52e8fd74d45 100644
--- a/fs/ceph/ioctl.h
+++ b/fs/ceph/ioctl.h
@@ -4,7 +4,7 @@
 #include <linux/ioctl.h>
 #include <linux/types.h>
 
-#define CEPH_IOCTL_MAGIC 0x98
+#define CEPH_IOCTL_MAGIC 0x97
 
 /* just use u64 to align sanely on all archs */
 struct ceph_ioctl_layout {
diff --git a/fs/ceph/locks.c b/fs/ceph/locks.c
index 40abde93c34..476b329867d 100644
--- a/fs/ceph/locks.c
+++ b/fs/ceph/locks.c
@@ -11,40 +11,68 @@
  * Implement fcntl and flock locking functions.
  */
 static int ceph_lock_message(u8 lock_type, u16 operation, struct file *file,
-			     u64 pid, u64 pid_ns,
-			     int cmd, u64 start, u64 length, u8 wait)
+			     int cmd, u8 wait, struct file_lock *fl)
 {
 	struct inode *inode = file->f_dentry->d_inode;
 	struct ceph_mds_client *mdsc =
 		ceph_sb_to_client(inode->i_sb)->mdsc;
 	struct ceph_mds_request *req;
 	int err;
+	u64 length = 0;
 
 	req = ceph_mdsc_create_request(mdsc, operation, USE_AUTH_MDS);
 	if (IS_ERR(req))
 		return PTR_ERR(req);
 	req->r_inode = igrab(inode);
 
+	/* mds requires start and length rather than start and end */
+	if (LLONG_MAX == fl->fl_end)
+		length = 0;
+	else
+		length = fl->fl_end - fl->fl_start + 1;
+
 	dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
 	     "length: %llu, wait: %d, type`: %d", (int)lock_type,
-	     (int)operation, pid, start, length, wait, cmd);
+	     (int)operation, (u64)fl->fl_pid, fl->fl_start,
+	     length, wait, fl->fl_type);
+
 
 	req->r_args.filelock_change.rule = lock_type;
 	req->r_args.filelock_change.type = cmd;
-	req->r_args.filelock_change.pid = cpu_to_le64(pid);
+	req->r_args.filelock_change.pid = cpu_to_le64((u64)fl->fl_pid);
 	/* This should be adjusted, but I'm not sure if
 	   namespaces actually get id numbers*/
 	req->r_args.filelock_change.pid_namespace =
-		cpu_to_le64((u64)pid_ns);
-	req->r_args.filelock_change.start = cpu_to_le64(start);
+		cpu_to_le64((u64)(unsigned long)fl->fl_nspid);
+	req->r_args.filelock_change.start = cpu_to_le64(fl->fl_start);
 	req->r_args.filelock_change.length = cpu_to_le64(length);
 	req->r_args.filelock_change.wait = wait;
 
 	err = ceph_mdsc_do_request(mdsc, inode, req);
+
+	if ( operation == CEPH_MDS_OP_GETFILELOCK){
+		fl->fl_pid = le64_to_cpu(req->r_reply_info.filelock_reply->pid);
+		if (CEPH_LOCK_SHARED == req->r_reply_info.filelock_reply->type)
+			fl->fl_type = F_RDLCK;
+		else if (CEPH_LOCK_EXCL == req->r_reply_info.filelock_reply->type)
+			fl->fl_type = F_WRLCK;
+		else
+			fl->fl_type = F_UNLCK;
+
+		fl->fl_start = le64_to_cpu(req->r_reply_info.filelock_reply->start);
+		length = le64_to_cpu(req->r_reply_info.filelock_reply->start) +
+						 le64_to_cpu(req->r_reply_info.filelock_reply->length);
+		if (length >= 1)
+			fl->fl_end = length -1;
+		else
+			fl->fl_end = 0;
+
+	}
 	ceph_mdsc_put_request(req);
 	dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
-	     "length: %llu, wait: %d, type`: %d err code %d", (int)lock_type,
-	     (int)operation, pid, start, length, wait, cmd, err);
+	     "length: %llu, wait: %d, type`: %d, err code %d", (int)lock_type,
+	     (int)operation, (u64)fl->fl_pid, fl->fl_start,
+	     length, wait, fl->fl_type, err);
 	return err;
 }
 
@@ -54,7 +82,6 @@ static int ceph_lock_message(u8 lock_type, u16 operation, struct file *file,
  */
 int ceph_lock(struct file *file, int cmd, struct file_lock *fl)
 {
-	u64 length;
 	u8 lock_cmd;
 	int err;
 	u8 wait = 0;
@@ -76,29 +103,20 @@ int ceph_lock(struct file *file, int cmd, struct file_lock *fl)
 	else
 		lock_cmd = CEPH_LOCK_UNLOCK;
 
-	if (LLONG_MAX == fl->fl_end)
-		length = 0;
-	else
-		length = fl->fl_end - fl->fl_start + 1;
-
-	err = ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
-				(u64)fl->fl_pid,
-				(u64)(unsigned long)fl->fl_nspid,
-				lock_cmd, fl->fl_start,
-				length, wait);
+	err = ceph_lock_message(CEPH_LOCK_FCNTL, op, file, lock_cmd, wait, fl);
 	if (!err) {
-		dout("mds locked, locking locally");
-		err = posix_lock_file(file, fl, NULL);
-		if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
-			/* undo! This should only happen if the kernel detects
-			 * local deadlock. */
-			ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
-					  (u64)fl->fl_pid,
-					  (u64)(unsigned long)fl->fl_nspid,
-					  CEPH_LOCK_UNLOCK, fl->fl_start,
-					  length, 0);
-			dout("got %d on posix_lock_file, undid lock", err);
+		if ( op != CEPH_MDS_OP_GETFILELOCK ){
+			dout("mds locked, locking locally");
+			err = posix_lock_file(file, fl, NULL);
+			if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
+				/* undo! This should only happen if the kernel detects
+				 * local deadlock. */
+				ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
+						  CEPH_LOCK_UNLOCK, 0, fl);
+				dout("got %d on posix_lock_file, undid lock", err);
+			}
 		}
+
 	} else {
 		dout("mds returned error code %d", err);
 	}
@@ -107,7 +125,6 @@ int ceph_lock(struct file *file, int cmd, struct file_lock *fl)
 
 int ceph_flock(struct file *file, int cmd, struct file_lock *fl)
 {
-	u64 length;
 	u8 lock_cmd;
 	int err;
 	u8 wait = 1;
@@ -127,26 +144,15 @@ int ceph_flock(struct file *file, int cmd, struct file_lock *fl)
 		lock_cmd = CEPH_LOCK_EXCL;
 	else
 		lock_cmd = CEPH_LOCK_UNLOCK;
-	/* mds requires start and length rather than start and end */
-	if (LLONG_MAX == fl->fl_end)
-		length = 0;
-	else
-		length = fl->fl_end - fl->fl_start + 1;
 
 	err = ceph_lock_message(CEPH_LOCK_FLOCK, CEPH_MDS_OP_SETFILELOCK,
-				file, (u64)fl->fl_pid,
-				(u64)(unsigned long)fl->fl_nspid,
-				lock_cmd, fl->fl_start,
-				length, wait);
+				file, lock_cmd, wait, fl);
 	if (!err) {
 		err = flock_lock_file_wait(file, fl);
 		if (err) {
 			ceph_lock_message(CEPH_LOCK_FLOCK,
 					  CEPH_MDS_OP_SETFILELOCK,
-					  file, (u64)fl->fl_pid,
-					  (u64)(unsigned long)fl->fl_nspid,
-					  CEPH_LOCK_UNLOCK, fl->fl_start,
-					  length, 0);
+					  file, CEPH_LOCK_UNLOCK, 0, fl);
 			dout("got %d on flock_lock_file_wait, undid lock", err);
 		}
 	} else {
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 3142b15940c..a50fca1e03b 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -6,7 +6,6 @@
 #include <linux/sched.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 
 #include "super.h"
 #include "mds_client.h"
@@ -203,6 +202,38 @@ out_bad:
 }
 
 /*
+ * parse fcntl F_GETLK results
+ */
+static int parse_reply_info_filelock(void **p, void *end,
+                struct ceph_mds_reply_info_parsed *info)
+{
+	if (*p + sizeof(*info->filelock_reply) > end)
+		goto bad;
+
+	info->filelock_reply = *p;
+	*p += sizeof(*info->filelock_reply);
+
+	if (unlikely(*p != end))
+		goto bad;
+	return 0;
+
+bad:
+	return -EIO;
+}
+
+/*
+ * parse extra results
+ */
+static int parse_reply_info_extra(void **p, void *end,
+                struct ceph_mds_reply_info_parsed *info)
+{
+	if (info->head->op == CEPH_MDS_OP_GETFILELOCK)
+		return parse_reply_info_filelock(p, end, info);
+	else
+		return parse_reply_info_dir(p, end, info);
+}
+
+/*
  * parse entire mds reply
  */
 static int parse_reply_info(struct ceph_msg *msg,
@@ -224,10 +255,10 @@ static int parse_reply_info(struct ceph_msg *msg,
 			goto out_bad;
 	}
 
-	/* dir content */
+	/* extra */
 	ceph_decode_32_safe(&p, end, len, bad);
 	if (len > 0) {
-		err = parse_reply_info_dir(&p, p+len, info);
+		err = parse_reply_info_extra(&p, p+len, info);
 		if (err < 0)
 			goto out_bad;
 	}
@@ -529,6 +560,9 @@ static void __register_request(struct ceph_mds_client *mdsc,
 	ceph_mdsc_get_request(req);
 	__insert_request(mdsc, req);
 
+	req->r_uid = current_fsuid();
+	req->r_gid = current_fsgid();
+
 	if (dir) {
 		struct ceph_inode_info *ci = ceph_inode(dir);
 
@@ -1452,7 +1486,7 @@ retry:
 	*base = ceph_ino(temp->d_inode);
 	*plen = len;
 	dout("build_path on %p %d built %llx '%.*s'\n",
-	     dentry, atomic_read(&dentry->d_count), *base, len, path);
+	     dentry, dentry->d_count, *base, len, path);
 	return path;
 }
 
@@ -1588,8 +1622,8 @@ static struct ceph_msg *create_request_message(struct ceph_mds_client *mdsc,
 
 	head->mdsmap_epoch = cpu_to_le32(mdsc->mdsmap->m_epoch);
 	head->op = cpu_to_le32(req->r_op);
-	head->caller_uid = cpu_to_le32(current_fsuid());
-	head->caller_gid = cpu_to_le32(current_fsgid());
+	head->caller_uid = cpu_to_le32(req->r_uid);
+	head->caller_gid = cpu_to_le32(req->r_gid);
 	head->args = req->r_args;
 
 	ceph_encode_filepath(&p, end, ino1, path1);
@@ -2072,7 +2106,7 @@ static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg)
 
 	mutex_lock(&session->s_mutex);
 	if (err < 0) {
-		pr_err("mdsc_handle_reply got corrupt reply mds%d\n", mds);
+		pr_err("mdsc_handle_reply got corrupt reply mds%d(tid:%lld)\n", mds, tid);
 		ceph_msg_dump(msg);
 		goto out_err;
 	}
@@ -2092,7 +2126,8 @@ static void handle_reply(struct ceph_mds_session *session, struct ceph_msg *msg)
 	mutex_lock(&req->r_fill_mutex);
 	err = ceph_fill_trace(mdsc->fsc->sb, req, req->r_session);
 	if (err == 0) {
-		if (result == 0 && rinfo->dir_nr)
+		if (result == 0 && req->r_op != CEPH_MDS_OP_GETFILELOCK &&
+		    rinfo->dir_nr)
 			ceph_readdir_prepopulate(req, req->r_session);
 		ceph_unreserve_caps(mdsc, &req->r_caps_reservation);
 	}
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index d66d63c7235..aabe563b54d 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -42,26 +42,37 @@ struct ceph_mds_reply_info_in {
 };
 
 /*
- * parsed info about an mds reply, including information about the
- * target inode and/or its parent directory and dentry, and directory
- * contents (for readdir results).
+ * parsed info about an mds reply, including information about
+ * either: 1) the target inode and/or its parent directory and dentry,
+ * and directory contents (for readdir results), or
+ * 2) the file range lock info (for fcntl F_GETLK results).
  */
 struct ceph_mds_reply_info_parsed {
 	struct ceph_mds_reply_head    *head;
 
+	/* trace */
 	struct ceph_mds_reply_info_in diri, targeti;
 	struct ceph_mds_reply_dirfrag *dirfrag;
 	char                          *dname;
 	u32                           dname_len;
 	struct ceph_mds_reply_lease   *dlease;
 
-	struct ceph_mds_reply_dirfrag *dir_dir;
-	int                           dir_nr;
-	char                          **dir_dname;
-	u32                           *dir_dname_len;
-	struct ceph_mds_reply_lease   **dir_dlease;
-	struct ceph_mds_reply_info_in *dir_in;
-	u8                            dir_complete, dir_end;
+	/* extra */
+	union {
+		/* for fcntl F_GETLK results */
+		struct ceph_filelock *filelock_reply;
+
+		/* for readdir results */
+		struct {
+			struct ceph_mds_reply_dirfrag *dir_dir;
+			int                           dir_nr;
+			char                          **dir_dname;
+			u32                           *dir_dname_len;
+			struct ceph_mds_reply_lease   **dir_dlease;
+			struct ceph_mds_reply_info_in *dir_in;
+			u8                            dir_complete, dir_end;
+		};
+	};
 
 	/* encoded blob describing snapshot contexts for certain
 	   operations (e.g., open) */
@@ -170,6 +181,8 @@ struct ceph_mds_request {
 
 	union ceph_mds_request_args r_args;
 	int r_fmode;        /* file mode, if expecting cap */
+	uid_t r_uid;
+	gid_t r_gid;
 
 	/* for choosing which mds to send this request to */
 	int r_direct_mode;
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 1886294e12f..4553d8829ed 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -293,9 +293,7 @@ struct ceph_inode_info {
 	int i_rd_ref, i_rdcache_ref, i_wr_ref;
 	int i_wrbuffer_ref, i_wrbuffer_ref_head;
 	u32 i_shared_gen;       /* increment each time we get FILE_SHARED */
-	u32 i_rdcache_gen;      /* we increment this each time we get
-				   FILE_CACHE.  If it's non-zero, we
-				   _may_ have cached pages. */
+	u32 i_rdcache_gen;      /* incremented each time we get FILE_CACHE. */
 	u32 i_rdcache_revoking; /* RDCACHE gen to async invalidate, if any */
 
 	struct list_head i_unsafe_writes; /* uncommitted sync writes */
@@ -667,7 +665,7 @@ extern void ceph_queue_invalidate(struct inode *inode);
 extern void ceph_queue_writeback(struct inode *inode);
 
 extern int ceph_do_getattr(struct inode *inode, int mask);
-extern int ceph_permission(struct inode *inode, int mask);
+extern int ceph_permission(struct inode *inode, int mask, unsigned int flags);
 extern int ceph_setattr(struct dentry *dentry, struct iattr *attr);
 extern int ceph_getattr(struct vfsmount *mnt, struct dentry *dentry,
 			struct kstat *stat);
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 0ed213970ce..ee45648b0d1 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -4,6 +4,7 @@ config CIFS
 	select NLS
 	select CRYPTO
 	select CRYPTO_MD5
+	select CRYPTO_HMAC
 	select CRYPTO_ARC4
 	help
 	  This is the client VFS module for the Common Internet File System
@@ -143,6 +144,13 @@ config CIFS_FSCACHE
 	    to be cached locally on disk through the general filesystem cache
 	    manager. If unsure, say N.
 
+config CIFS_ACL
+	  bool "Provide CIFS ACL support (EXPERIMENTAL)"
+	  depends on EXPERIMENTAL && CIFS_XATTR
+	  help
+	    Allows to fetch CIFS/NTFS ACL from the server.  The DACL blob
+	    is handed over to the application/caller.
+
 config CIFS_EXPERIMENTAL
 	  bool "CIFS Experimental Features (EXPERIMENTAL)"
 	  depends on CIFS && EXPERIMENTAL
diff --git a/fs/cifs/Makefile b/fs/cifs/Makefile
index adefa60a9bd..43b19dd3919 100644
--- a/fs/cifs/Makefile
+++ b/fs/cifs/Makefile
@@ -6,7 +6,9 @@ obj-$(CONFIG_CIFS) += cifs.o
 cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \
 	  link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o \
 	  md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o \
-	  readdir.o ioctl.o sess.o export.o cifsacl.o
+	  readdir.o ioctl.o sess.o export.o
+
+cifs-$(CONFIG_CIFS_ACL) += cifsacl.o
 
 cifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o
 
diff --git a/fs/cifs/README b/fs/cifs/README
index ee68d103654..46af99ab361 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -337,6 +337,15 @@ A partial list of the supported mount options follows:
   wsize		default write size (default 57344)
 		maximum wsize currently allowed by CIFS is 57344 (fourteen
 		4096 byte pages)
+  actimeo=n	attribute cache timeout in seconds (default 1 second).
+		After this timeout, the cifs client requests fresh attribute
+		information from the server. This option allows to tune the
+		attribute cache timeout to suit the workload needs. Shorter
+		timeouts mean better the cache coherency, but increased number
+		of calls to the server. Longer timeouts mean reduced number
+		of calls to the server at the expense of less stricter cache
+		coherency checks (i.e. incorrect attribute cache for a short
+		period of time).
   rw		mount the network share read-write (note that the
 		server may still consider the share read-only)
   ro		mount network share read-only
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index e9a393c9c2c..7852cd67705 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -48,6 +48,7 @@ struct cifs_sb_info {
 	struct nls_table *local_nls;
 	unsigned int rsize;
 	unsigned int wsize;
+	unsigned long actimeo; /* attribute cache timeout (jiffies) */
 	atomic_t active;
 	uid_t	mnt_uid;
 	gid_t	mnt_gid;
diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c
index c9b4792ae82..a437ec391a0 100644
--- a/fs/cifs/cifsacl.c
+++ b/fs/cifs/cifsacl.c
@@ -30,8 +30,6 @@
 #include "cifs_debug.h"
 
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-
 static struct cifs_wksid wksidarr[NUM_WK_SIDS] = {
 	{{1, 0, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0} }, "null user"},
 	{{1, 1, {0, 0, 0, 0, 0, 1}, {0, 0, 0, 0, 0} }, "nobody"},
@@ -560,7 +558,7 @@ static struct cifs_ntsd *get_cifs_acl_by_fid(struct cifs_sb_info *cifs_sb,
 	struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
 
 	if (IS_ERR(tlink))
-		return NULL;
+		return ERR_CAST(tlink);
 
 	xid = GetXid();
 	rc = CIFSSMBGetCIFSACL(xid, tlink_tcon(tlink), fid, &pntsd, pacllen);
@@ -568,7 +566,9 @@ static struct cifs_ntsd *get_cifs_acl_by_fid(struct cifs_sb_info *cifs_sb,
 
 	cifs_put_tlink(tlink);
 
-	cFYI(1, "GetCIFSACL rc = %d ACL len %d", rc, *pacllen);
+	cFYI(1, "%s: rc = %d ACL len %d", __func__, rc, *pacllen);
+	if (rc)
+		return ERR_PTR(rc);
 	return pntsd;
 }
 
@@ -583,7 +583,7 @@ static struct cifs_ntsd *get_cifs_acl_by_path(struct cifs_sb_info *cifs_sb,
 	struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
 
 	if (IS_ERR(tlink))
-		return NULL;
+		return ERR_CAST(tlink);
 
 	tcon = tlink_tcon(tlink);
 	xid = GetXid();
@@ -591,23 +591,22 @@ static struct cifs_ntsd *get_cifs_acl_by_path(struct cifs_sb_info *cifs_sb,
 	rc = CIFSSMBOpen(xid, tcon, path, FILE_OPEN, READ_CONTROL, 0,
 			 &fid, &oplock, NULL, cifs_sb->local_nls,
 			 cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
-	if (rc) {
-		cERROR(1, "Unable to open file to get ACL");
-		goto out;
+	if (!rc) {
+		rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen);
+		CIFSSMBClose(xid, tcon, fid);
 	}
 
-	rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen);
-	cFYI(1, "GetCIFSACL rc = %d ACL len %d", rc, *pacllen);
-
-	CIFSSMBClose(xid, tcon, fid);
- out:
 	cifs_put_tlink(tlink);
 	FreeXid(xid);
+
+	cFYI(1, "%s: rc = %d ACL len %d", __func__, rc, *pacllen);
+	if (rc)
+		return ERR_PTR(rc);
 	return pntsd;
 }
 
 /* Retrieve an ACL from the server */
-static struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb,
+struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb,
 				      struct inode *inode, const char *path,
 				      u32 *pacllen)
 {
@@ -695,7 +694,7 @@ static int set_cifs_acl(struct cifs_ntsd *pnntsd, __u32 acllen,
 }
 
 /* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
-void
+int
 cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
 		  struct inode *inode, const char *path, const __u16 *pfid)
 {
@@ -711,17 +710,21 @@ cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
 		pntsd = get_cifs_acl(cifs_sb, inode, path, &acllen);
 
 	/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
-	if (pntsd)
+	if (IS_ERR(pntsd)) {
+		rc = PTR_ERR(pntsd);
+		cERROR(1, "%s: error %d getting sec desc", __func__, rc);
+	} else {
 		rc = parse_sec_desc(pntsd, acllen, fattr);
-	if (rc)
-		cFYI(1, "parse sec desc failed rc = %d", rc);
+		kfree(pntsd);
+		if (rc)
+			cERROR(1, "parse sec desc failed rc = %d", rc);
+	}
 
-	kfree(pntsd);
-	return;
+	return rc;
 }
 
 /* Convert mode bits to an ACL so we can update the ACL on the server */
-int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
+int mode_to_cifs_acl(struct inode *inode, const char *path, __u64 nmode)
 {
 	int rc = 0;
 	__u32 secdesclen = 0;
@@ -736,7 +739,10 @@ int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
 	/* Add three ACEs for owner, group, everyone getting rid of
 	   other ACEs as chmod disables ACEs and set the security descriptor */
 
-	if (pntsd) {
+	if (IS_ERR(pntsd)) {
+		rc = PTR_ERR(pntsd);
+		cERROR(1, "%s: error %d getting sec desc", __func__, rc);
+	} else {
 		/* allocate memory for the smb header,
 		   set security descriptor request security descriptor
 		   parameters, and secuirty descriptor itself */
@@ -766,4 +772,3 @@ int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
 
 	return rc;
 }
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
diff --git a/fs/cifs/cifsacl.h b/fs/cifs/cifsacl.h
index 6c8096cf515..c4ae7d03656 100644
--- a/fs/cifs/cifsacl.h
+++ b/fs/cifs/cifsacl.h
@@ -74,11 +74,7 @@ struct cifs_wksid {
 	char sidname[SIDNAMELENGTH];
 } __attribute__((packed));
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-
 extern int match_sid(struct cifs_sid *);
 extern int compare_sids(const struct cifs_sid *, const struct cifs_sid *);
 
-#endif /*  CONFIG_CIFS_EXPERIMENTAL */
-
 #endif /* _CIFSACL_H */
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 9c3789762ab..8e21e0fe65d 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -283,10 +283,13 @@ cifs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	return 0;
 }
 
-static int cifs_permission(struct inode *inode, int mask)
+static int cifs_permission(struct inode *inode, int mask, unsigned int flags)
 {
 	struct cifs_sb_info *cifs_sb;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	cifs_sb = CIFS_SB(inode->i_sb);
 
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) {
@@ -298,7 +301,7 @@ static int cifs_permission(struct inode *inode, int mask)
 		on the client (above and beyond ACL on servers) for
 		servers which do not support setting and viewing mode bits,
 		so allowing client to check permissions is useful */
-		return generic_permission(inode, mask, NULL);
+		return generic_permission(inode, mask, flags, NULL);
 }
 
 static struct kmem_cache *cifs_inode_cachep;
@@ -334,10 +337,17 @@ cifs_alloc_inode(struct super_block *sb)
 	return &cifs_inode->vfs_inode;
 }
 
+static void cifs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(cifs_inode_cachep, CIFS_I(inode));
+}
+
 static void
 cifs_destroy_inode(struct inode *inode)
 {
-	kmem_cache_free(cifs_inode_cachep, CIFS_I(inode));
+	call_rcu(&inode->i_rcu, cifs_i_callback);
 }
 
 static void
@@ -458,9 +468,13 @@ cifs_show_options(struct seq_file *s, struct vfsmount *m)
 		seq_printf(s, ",acl");
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MF_SYMLINKS)
 		seq_printf(s, ",mfsymlinks");
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE)
+		seq_printf(s, ",fsc");
 
 	seq_printf(s, ",rsize=%d", cifs_sb->rsize);
 	seq_printf(s, ",wsize=%d", cifs_sb->wsize);
+	/* convert actimeo and display it in seconds */
+		seq_printf(s, ",actimeo=%lu", cifs_sb->actimeo / HZ);
 
 	return 0;
 }
@@ -933,7 +947,6 @@ init_cifs(void)
 	GlobalCurrentXid = 0;
 	GlobalTotalActiveXid = 0;
 	GlobalMaxActiveXid = 0;
-	memset(Local_System_Name, 0, 15);
 	spin_lock_init(&cifs_tcp_ses_lock);
 	spin_lock_init(&cifs_file_list_lock);
 	spin_lock_init(&GlobalMid_Lock);
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index b577bf0a1bb..7136c0c3e2f 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -45,6 +45,16 @@
 #define CIFS_MIN_RCV_POOL 4
 
 /*
+ * default attribute cache timeout (jiffies)
+ */
+#define CIFS_DEF_ACTIMEO (1 * HZ)
+
+/*
+ * max attribute cache timeout (jiffies) - 2^30
+ */
+#define CIFS_MAX_ACTIMEO (1 << 30)
+
+/*
  * MAX_REQ is the maximum number of requests that WE will send
  * on one socket concurrently. It also matches the most common
  * value of max multiplex returned by servers.  We may
@@ -746,8 +756,6 @@ GLOBAL_EXTERN unsigned int GlobalTotalActiveXid; /* prot by GlobalMid_Sem */
 GLOBAL_EXTERN unsigned int GlobalMaxActiveXid;	/* prot by GlobalMid_Sem */
 GLOBAL_EXTERN spinlock_t GlobalMid_Lock;  /* protects above & list operations */
 					  /* on midQ entries */
-GLOBAL_EXTERN char Local_System_Name[15];
-
 /*
  *  Global counters, updated atomically
  */
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 7ed69b6b5fe..e6d1481b16c 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -54,7 +54,8 @@ do {								\
 	     __func__, curr_xid, (int)rc);			\
 } while (0)
 extern char *build_path_from_dentry(struct dentry *);
-extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb);
+extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb,
+					struct cifsTconInfo *tcon);
 extern char *build_wildcard_path_from_dentry(struct dentry *direntry);
 extern char *cifs_compose_mount_options(const char *sb_mountdata,
 		const char *fullpath, const struct dfs_info3_param *ref,
@@ -79,9 +80,7 @@ extern bool is_valid_oplock_break(struct smb_hdr *smb,
 				  struct TCP_Server_Info *);
 extern bool is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof);
 extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *, bool);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
 extern struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *, bool);
-#endif
 extern unsigned int smbCalcSize(struct smb_hdr *ptr);
 extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
 extern int decode_negTokenInit(unsigned char *security_blob, int length,
@@ -130,10 +129,12 @@ extern int cifs_get_file_info_unix(struct file *filp);
 extern int cifs_get_inode_info_unix(struct inode **pinode,
 			const unsigned char *search_path,
 			struct super_block *sb, int xid);
-extern void cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
+extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
 			      struct cifs_fattr *fattr, struct inode *inode,
 			      const char *path, const __u16 *pfid);
-extern int mode_to_acl(struct inode *inode, const char *path, __u64);
+extern int mode_to_cifs_acl(struct inode *inode, const char *path, __u64);
+extern struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *, struct inode *,
+					const char *, u32 *);
 
 extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
 			const char *);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 2f2632b6df5..67acfb3acad 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -2478,95 +2478,6 @@ querySymLinkRetry:
 }
 
 #ifdef CONFIG_CIFS_EXPERIMENTAL
-/* Initialize NT TRANSACT SMB into small smb request buffer.
-   This assumes that all NT TRANSACTS that we init here have
-   total parm and data under about 400 bytes (to fit in small cifs
-   buffer size), which is the case so far, it easily fits. NB:
-	Setup words themselves and ByteCount
-	MaxSetupCount (size of returned setup area) and
-	MaxParameterCount (returned parms size) must be set by caller */
-static int
-smb_init_nttransact(const __u16 sub_command, const int setup_count,
-		   const int parm_len, struct cifsTconInfo *tcon,
-		   void **ret_buf)
-{
-	int rc;
-	__u32 temp_offset;
-	struct smb_com_ntransact_req *pSMB;
-
-	rc = small_smb_init(SMB_COM_NT_TRANSACT, 19 + setup_count, tcon,
-				(void **)&pSMB);
-	if (rc)
-		return rc;
-	*ret_buf = (void *)pSMB;
-	pSMB->Reserved = 0;
-	pSMB->TotalParameterCount = cpu_to_le32(parm_len);
-	pSMB->TotalDataCount  = 0;
-	pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
-					  MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
-	pSMB->ParameterCount = pSMB->TotalParameterCount;
-	pSMB->DataCount  = pSMB->TotalDataCount;
-	temp_offset = offsetof(struct smb_com_ntransact_req, Parms) +
-			(setup_count * 2) - 4 /* for rfc1001 length itself */;
-	pSMB->ParameterOffset = cpu_to_le32(temp_offset);
-	pSMB->DataOffset = cpu_to_le32(temp_offset + parm_len);
-	pSMB->SetupCount = setup_count; /* no need to le convert byte fields */
-	pSMB->SubCommand = cpu_to_le16(sub_command);
-	return 0;
-}
-
-static int
-validate_ntransact(char *buf, char **ppparm, char **ppdata,
-		   __u32 *pparmlen, __u32 *pdatalen)
-{
-	char *end_of_smb;
-	__u32 data_count, data_offset, parm_count, parm_offset;
-	struct smb_com_ntransact_rsp *pSMBr;
-
-	*pdatalen = 0;
-	*pparmlen = 0;
-
-	if (buf == NULL)
-		return -EINVAL;
-
-	pSMBr = (struct smb_com_ntransact_rsp *)buf;
-
-	/* ByteCount was converted from little endian in SendReceive */
-	end_of_smb = 2 /* sizeof byte count */ + pSMBr->ByteCount +
-			(char *)&pSMBr->ByteCount;
-
-	data_offset = le32_to_cpu(pSMBr->DataOffset);
-	data_count = le32_to_cpu(pSMBr->DataCount);
-	parm_offset = le32_to_cpu(pSMBr->ParameterOffset);
-	parm_count = le32_to_cpu(pSMBr->ParameterCount);
-
-	*ppparm = (char *)&pSMBr->hdr.Protocol + parm_offset;
-	*ppdata = (char *)&pSMBr->hdr.Protocol + data_offset;
-
-	/* should we also check that parm and data areas do not overlap? */
-	if (*ppparm > end_of_smb) {
-		cFYI(1, "parms start after end of smb");
-		return -EINVAL;
-	} else if (parm_count + *ppparm > end_of_smb) {
-		cFYI(1, "parm end after end of smb");
-		return -EINVAL;
-	} else if (*ppdata > end_of_smb) {
-		cFYI(1, "data starts after end of smb");
-		return -EINVAL;
-	} else if (data_count + *ppdata > end_of_smb) {
-		cFYI(1, "data %p + count %d (%p) past smb end %p start %p",
-			*ppdata, data_count, (data_count + *ppdata),
-			end_of_smb, pSMBr);
-		return -EINVAL;
-	} else if (parm_count + data_count > pSMBr->ByteCount) {
-		cFYI(1, "parm count and data count larger than SMB");
-		return -EINVAL;
-	}
-	*pdatalen = data_count;
-	*pparmlen = parm_count;
-	return 0;
-}
-
 int
 CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
 			const unsigned char *searchName,
@@ -3056,7 +2967,97 @@ GetExtAttrOut:
 
 #endif /* CONFIG_POSIX */
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_ACL
+/*
+ * Initialize NT TRANSACT SMB into small smb request buffer.  This assumes that
+ * all NT TRANSACTS that we init here have total parm and data under about 400
+ * bytes (to fit in small cifs buffer size), which is the case so far, it
+ * easily fits. NB: Setup words themselves and ByteCount MaxSetupCount (size of
+ * returned setup area) and MaxParameterCount (returned parms size) must be set
+ * by caller
+ */
+static int
+smb_init_nttransact(const __u16 sub_command, const int setup_count,
+		   const int parm_len, struct cifsTconInfo *tcon,
+		   void **ret_buf)
+{
+	int rc;
+	__u32 temp_offset;
+	struct smb_com_ntransact_req *pSMB;
+
+	rc = small_smb_init(SMB_COM_NT_TRANSACT, 19 + setup_count, tcon,
+				(void **)&pSMB);
+	if (rc)
+		return rc;
+	*ret_buf = (void *)pSMB;
+	pSMB->Reserved = 0;
+	pSMB->TotalParameterCount = cpu_to_le32(parm_len);
+	pSMB->TotalDataCount  = 0;
+	pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
+					  MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
+	pSMB->ParameterCount = pSMB->TotalParameterCount;
+	pSMB->DataCount  = pSMB->TotalDataCount;
+	temp_offset = offsetof(struct smb_com_ntransact_req, Parms) +
+			(setup_count * 2) - 4 /* for rfc1001 length itself */;
+	pSMB->ParameterOffset = cpu_to_le32(temp_offset);
+	pSMB->DataOffset = cpu_to_le32(temp_offset + parm_len);
+	pSMB->SetupCount = setup_count; /* no need to le convert byte fields */
+	pSMB->SubCommand = cpu_to_le16(sub_command);
+	return 0;
+}
+
+static int
+validate_ntransact(char *buf, char **ppparm, char **ppdata,
+		   __u32 *pparmlen, __u32 *pdatalen)
+{
+	char *end_of_smb;
+	__u32 data_count, data_offset, parm_count, parm_offset;
+	struct smb_com_ntransact_rsp *pSMBr;
+
+	*pdatalen = 0;
+	*pparmlen = 0;
+
+	if (buf == NULL)
+		return -EINVAL;
+
+	pSMBr = (struct smb_com_ntransact_rsp *)buf;
+
+	/* ByteCount was converted from little endian in SendReceive */
+	end_of_smb = 2 /* sizeof byte count */ + pSMBr->ByteCount +
+			(char *)&pSMBr->ByteCount;
+
+	data_offset = le32_to_cpu(pSMBr->DataOffset);
+	data_count = le32_to_cpu(pSMBr->DataCount);
+	parm_offset = le32_to_cpu(pSMBr->ParameterOffset);
+	parm_count = le32_to_cpu(pSMBr->ParameterCount);
+
+	*ppparm = (char *)&pSMBr->hdr.Protocol + parm_offset;
+	*ppdata = (char *)&pSMBr->hdr.Protocol + data_offset;
+
+	/* should we also check that parm and data areas do not overlap? */
+	if (*ppparm > end_of_smb) {
+		cFYI(1, "parms start after end of smb");
+		return -EINVAL;
+	} else if (parm_count + *ppparm > end_of_smb) {
+		cFYI(1, "parm end after end of smb");
+		return -EINVAL;
+	} else if (*ppdata > end_of_smb) {
+		cFYI(1, "data starts after end of smb");
+		return -EINVAL;
+	} else if (data_count + *ppdata > end_of_smb) {
+		cFYI(1, "data %p + count %d (%p) past smb end %p start %p",
+			*ppdata, data_count, (data_count + *ppdata),
+			end_of_smb, pSMBr);
+		return -EINVAL;
+	} else if (parm_count + data_count > pSMBr->ByteCount) {
+		cFYI(1, "parm count and data count larger than SMB");
+		return -EINVAL;
+	}
+	*pdatalen = data_count;
+	*pparmlen = parm_count;
+	return 0;
+}
+
 /* Get Security Descriptor (by handle) from remote server for a file or dir */
 int
 CIFSSMBGetCIFSACL(const int xid, struct cifsTconInfo *tcon, __u16 fid,
@@ -3214,7 +3215,7 @@ setCifsAclRetry:
 	return (rc);
 }
 
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
+#endif /* CONFIG_CIFS_ACL */
 
 /* Legacy Query Path Information call for lookup to old servers such
    as Win9x/WinME */
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 251a17c0354..cc1a8604a79 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -105,6 +105,7 @@ struct smb_vol {
 	unsigned int wsize;
 	bool sockopt_tcp_nodelay:1;
 	unsigned short int port;
+	unsigned long actimeo; /* attribute cache timeout (jiffies) */
 	char *prepath;
 	struct sockaddr_storage srcaddr; /* allow binding to a local IP */
 	struct nls_table *local_nls;
@@ -806,23 +807,20 @@ cifs_parse_mount_options(char *options, const char *devname,
 	short int override_gid = -1;
 	bool uid_specified = false;
 	bool gid_specified = false;
+	char *nodename = utsname()->nodename;
 
 	separator[0] = ',';
 	separator[1] = 0;
 
-	if (Local_System_Name[0] != 0)
-		memcpy(vol->source_rfc1001_name, Local_System_Name, 15);
-	else {
-		char *nodename = utsname()->nodename;
-		int n = strnlen(nodename, 15);
-		memset(vol->source_rfc1001_name, 0x20, 15);
-		for (i = 0; i < n; i++) {
-			/* does not have to be perfect mapping since field is
-			informational, only used for servers that do not support
-			port 445 and it can be overridden at mount time */
-			vol->source_rfc1001_name[i] = toupper(nodename[i]);
-		}
-	}
+	/*
+	 * does not have to be perfect mapping since field is
+	 * informational, only used for servers that do not support
+	 * port 445 and it can be overridden at mount time
+	 */
+	memset(vol->source_rfc1001_name, 0x20, 15);
+	for (i = 0; i < strnlen(nodename, 15); i++)
+		vol->source_rfc1001_name[i] = toupper(nodename[i]);
+
 	vol->source_rfc1001_name[15] = 0;
 	/* null target name indicates to use *SMBSERVR default called name
 	   if we end up sending RFC1001 session initialize */
@@ -840,6 +838,8 @@ cifs_parse_mount_options(char *options, const char *devname,
 	/* default to using server inode numbers where available */
 	vol->server_ino = 1;
 
+	vol->actimeo = CIFS_DEF_ACTIMEO;
+
 	if (!options)
 		return 1;
 
@@ -1214,6 +1214,16 @@ cifs_parse_mount_options(char *options, const char *devname,
 					printk(KERN_WARNING "CIFS: server net"
 					"biosname longer than 15 truncated.\n");
 			}
+		} else if (strnicmp(data, "actimeo", 7) == 0) {
+			if (value && *value) {
+				vol->actimeo = HZ * simple_strtoul(value,
+								   &value, 0);
+				if (vol->actimeo > CIFS_MAX_ACTIMEO) {
+					cERROR(1, "CIFS: attribute cache"
+							"timeout too large");
+					return 1;
+				}
+			}
 		} else if (strnicmp(data, "credentials", 4) == 0) {
 			/* ignore */
 		} else if (strnicmp(data, "version", 3) == 0) {
@@ -1352,6 +1362,11 @@ cifs_parse_mount_options(char *options, const char *devname,
 				"supported. Instead set "
 				"/proc/fs/cifs/LookupCacheEnabled to 0\n");
 		} else if (strnicmp(data, "fsc", 3) == 0) {
+#ifndef CONFIG_CIFS_FSCACHE
+			cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE"
+				  "kernel config option set");
+			return 1;
+#endif
 			vol->fsc = true;
 		} else if (strnicmp(data, "mfsymlinks", 10) == 0) {
 			vol->mfsymlinks = true;
@@ -2566,6 +2581,8 @@ static void setup_cifs_sb(struct smb_vol *pvolume_info,
 	cFYI(1, "file mode: 0x%x  dir mode: 0x%x",
 		cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode);
 
+	cifs_sb->actimeo = pvolume_info->actimeo;
+
 	if (pvolume_info->noperm)
 		cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM;
 	if (pvolume_info->setuids)
@@ -2816,13 +2833,13 @@ remote_path_check:
 	/* check if a whole path (including prepath) is not remote */
 	if (!rc && cifs_sb->prepathlen && tcon) {
 		/* build_path_to_root works only when we have a valid tcon */
-		full_path = cifs_build_path_to_root(cifs_sb);
+		full_path = cifs_build_path_to_root(cifs_sb, tcon);
 		if (full_path == NULL) {
 			rc = -ENOMEM;
 			goto mount_fail_check;
 		}
 		rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
-		if (rc != -EREMOTE) {
+		if (rc != 0 && rc != -EREMOTE) {
 			kfree(full_path);
 			goto mount_fail_check;
 		}
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 3840eddbfb7..db2a58c00f7 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -135,9 +135,9 @@ static void setup_cifs_dentry(struct cifsTconInfo *tcon,
 			      struct inode *newinode)
 {
 	if (tcon->nocase)
-		direntry->d_op = &cifs_ci_dentry_ops;
+		d_set_d_op(direntry, &cifs_ci_dentry_ops);
 	else
-		direntry->d_op = &cifs_dentry_ops;
+		d_set_d_op(direntry, &cifs_dentry_ops);
 	d_instantiate(direntry, newinode);
 }
 
@@ -421,9 +421,9 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode,
 		rc = cifs_get_inode_info_unix(&newinode, full_path,
 						inode->i_sb, xid);
 		if (pTcon->nocase)
-			direntry->d_op = &cifs_ci_dentry_ops;
+			d_set_d_op(direntry, &cifs_ci_dentry_ops);
 		else
-			direntry->d_op = &cifs_dentry_ops;
+			d_set_d_op(direntry, &cifs_dentry_ops);
 
 		if (rc == 0)
 			d_instantiate(direntry, newinode);
@@ -604,9 +604,9 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 
 	if ((rc == 0) && (newInode != NULL)) {
 		if (pTcon->nocase)
-			direntry->d_op = &cifs_ci_dentry_ops;
+			d_set_d_op(direntry, &cifs_ci_dentry_ops);
 		else
-			direntry->d_op = &cifs_dentry_ops;
+			d_set_d_op(direntry, &cifs_dentry_ops);
 		d_add(direntry, newInode);
 		if (posix_open) {
 			filp = lookup_instantiate_filp(nd, direntry,
@@ -634,9 +634,9 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
 		rc = 0;
 		direntry->d_time = jiffies;
 		if (pTcon->nocase)
-			direntry->d_op = &cifs_ci_dentry_ops;
+			d_set_d_op(direntry, &cifs_ci_dentry_ops);
 		else
-			direntry->d_op = &cifs_dentry_ops;
+			d_set_d_op(direntry, &cifs_dentry_ops);
 		d_add(direntry, NULL);
 	/*	if it was once a directory (but how can we tell?) we could do
 		shrink_dcache_parent(direntry); */
@@ -656,22 +656,37 @@ lookup_out:
 static int
 cifs_d_revalidate(struct dentry *direntry, struct nameidata *nd)
 {
-	int isValid = 1;
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
 
 	if (direntry->d_inode) {
 		if (cifs_revalidate_dentry(direntry))
 			return 0;
-	} else {
-		cFYI(1, "neg dentry 0x%p name = %s",
-			 direntry, direntry->d_name.name);
-		if (time_after(jiffies, direntry->d_time + HZ) ||
-			!lookupCacheEnabled) {
-			d_drop(direntry);
-			isValid = 0;
-		}
+		else
+			return 1;
 	}
 
-	return isValid;
+	/*
+	 * This may be nfsd (or something), anyway, we can't see the
+	 * intent of this. So, since this can be for creation, drop it.
+	 */
+	if (!nd)
+		return 0;
+
+	/*
+	 * Drop the negative dentry, in order to make sure to use the
+	 * case sensitive name which is specified by user if this is
+	 * for creation.
+	 */
+	if (!(nd->flags & (LOOKUP_CONTINUE | LOOKUP_PARENT))) {
+		if (nd->flags & (LOOKUP_CREATE | LOOKUP_RENAME_TARGET))
+			return 0;
+	}
+
+	if (time_after(jiffies, direntry->d_time + HZ) || !lookupCacheEnabled)
+		return 0;
+
+	return 1;
 }
 
 /* static int cifs_d_delete(struct dentry *direntry)
@@ -688,9 +703,10 @@ const struct dentry_operations cifs_dentry_ops = {
 /* d_delete:       cifs_d_delete,      */ /* not needed except for debugging */
 };
 
-static int cifs_ci_hash(struct dentry *dentry, struct qstr *q)
+static int cifs_ci_hash(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *q)
 {
-	struct nls_table *codepage = CIFS_SB(dentry->d_inode->i_sb)->local_nls;
+	struct nls_table *codepage = CIFS_SB(dentry->d_sb)->local_nls;
 	unsigned long hash;
 	int i;
 
@@ -703,21 +719,16 @@ static int cifs_ci_hash(struct dentry *dentry, struct qstr *q)
 	return 0;
 }
 
-static int cifs_ci_compare(struct dentry *dentry, struct qstr *a,
-			   struct qstr *b)
+static int cifs_ci_compare(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	struct nls_table *codepage = CIFS_SB(dentry->d_inode->i_sb)->local_nls;
-
-	if ((a->len == b->len) &&
-	    (nls_strnicmp(codepage, a->name, b->name, a->len) == 0)) {
-		/*
-		 * To preserve case, don't let an existing negative dentry's
-		 * case take precedence.  If a is not a negative dentry, this
-		 * should have no side effects
-		 */
-		memcpy((void *)a->name, b->name, a->len);
+	struct nls_table *codepage = CIFS_SB(pinode->i_sb)->local_nls;
+
+	if ((name->len == len) &&
+	    (nls_strnicmp(codepage, name->name, str, len) == 0))
 		return 0;
-	}
 	return 1;
 }
 
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 0eb87026cad..548f06230a6 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -66,7 +66,7 @@ dns_resolve_server_name_to_ip(const char *unc, char **ip_addr)
 	/* Search for server name delimiter */
 	sep = memchr(hostname, '\\', len);
 	if (sep)
-		len = sep - unc;
+		len = sep - hostname;
 	else
 		cFYI(1, "%s: probably server name is whole unc: %s",
 		     __func__, unc);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 06c3e83fa38..5a28660ca2b 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1108,7 +1108,6 @@ static ssize_t cifs_write(struct cifsFileInfo *open_file,
 	return total_written;
 }
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
 struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *cifs_inode,
 					bool fsuid_only)
 {
@@ -1142,7 +1141,6 @@ struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *cifs_inode,
 	spin_unlock(&cifs_file_list_lock);
 	return NULL;
 }
-#endif
 
 struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode,
 					bool fsuid_only)
@@ -2271,8 +2269,10 @@ void cifs_oplock_break_get(struct cifsFileInfo *cfile)
 
 void cifs_oplock_break_put(struct cifsFileInfo *cfile)
 {
+	struct super_block *sb = cfile->dentry->d_sb;
+
 	cifsFileInfo_put(cfile);
-	cifs_sb_deactive(cfile->dentry->d_sb);
+	cifs_sb_deactive(sb);
 }
 
 const struct address_space_operations cifs_addr_ops = {
diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c
index a2ad94efcfe..297a43d0ff7 100644
--- a/fs/cifs/fscache.c
+++ b/fs/cifs/fscache.c
@@ -2,7 +2,7 @@
  *   fs/cifs/fscache.c - CIFS filesystem cache interface
  *
  *   Copyright (c) 2010 Novell, Inc.
- *   Author(s): Suresh Jayaraman (sjayaraman@suse.de>
+ *   Author(s): Suresh Jayaraman <sjayaraman@suse.de>
  *
  *   This library is free software; you can redistribute it and/or modify
  *   it under the terms of the GNU Lesser General Public License as published
@@ -67,10 +67,12 @@ static void cifs_fscache_enable_inode_cookie(struct inode *inode)
 	if (cifsi->fscache)
 		return;
 
-	cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
+	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE) {
+		cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
 				&cifs_fscache_inode_object_def, cifsi);
-	cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
+		cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
 				cifsi->fscache);
+	}
 }
 
 void cifs_fscache_release_inode_cookie(struct inode *inode)
@@ -101,10 +103,8 @@ void cifs_fscache_set_inode_cookie(struct inode *inode, struct file *filp)
 {
 	if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
 		cifs_fscache_disable_inode_cookie(inode);
-	else {
+	else
 		cifs_fscache_enable_inode_cookie(inode);
-		cFYI(1, "CIFS: fscache inode cookie set");
-	}
 }
 
 void cifs_fscache_reset_inode_cookie(struct inode *inode)
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 39869c3c3ef..a853a89857a 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -686,13 +686,18 @@ int cifs_get_inode_info(struct inode **pinode,
 			cFYI(1, "cifs_sfu_type failed: %d", tmprc);
 	}
 
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_ACL
 	/* fill in 0777 bits from ACL */
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
-		cFYI(1, "Getting mode bits from ACL");
-		cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path, pfid);
+		rc = cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path,
+						pfid);
+		if (rc) {
+			cFYI(1, "%s: Getting ACL failed with error: %d",
+				__func__, rc);
+			goto cgii_exit;
+		}
 	}
-#endif
+#endif /* CONFIG_CIFS_ACL */
 
 	/* fill in remaining high mode bits e.g. SUID, VTX */
 	if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
@@ -723,12 +728,12 @@ static const struct inode_operations cifs_ipc_inode_ops = {
 	.lookup = cifs_lookup,
 };
 
-char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb)
+char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb,
+				struct cifsTconInfo *tcon)
 {
 	int pplen = cifs_sb->prepathlen;
 	int dfsplen;
 	char *full_path = NULL;
-	struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb);
 
 	/* if no prefix path, simply set path to the root of share to "" */
 	if (pplen == 0) {
@@ -804,14 +809,14 @@ inode_has_hashed_dentries(struct inode *inode)
 {
 	struct dentry *dentry;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&inode->i_lock);
 	list_for_each_entry(dentry, &inode->i_dentry, d_alias) {
 		if (!d_unhashed(dentry) || IS_ROOT(dentry)) {
-			spin_unlock(&dcache_lock);
+			spin_unlock(&inode->i_lock);
 			return true;
 		}
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&inode->i_lock);
 	return false;
 }
 
@@ -870,7 +875,7 @@ struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
 	char *full_path;
 	struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb);
 
-	full_path = cifs_build_path_to_root(cifs_sb);
+	full_path = cifs_build_path_to_root(cifs_sb, tcon);
 	if (full_path == NULL)
 		return ERR_PTR(-ENOMEM);
 
@@ -881,8 +886,10 @@ struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
 		rc = cifs_get_inode_info(&inode, full_path, NULL, sb,
 						xid, NULL);
 
-	if (!inode)
-		return ERR_PTR(rc);
+	if (!inode) {
+		inode = ERR_PTR(rc);
+		goto out;
+	}
 
 #ifdef CONFIG_CIFS_FSCACHE
 	/* populate tcon->resource_id */
@@ -898,13 +905,11 @@ struct inode *cifs_root_iget(struct super_block *sb, unsigned long ino)
 		inode->i_uid = cifs_sb->mnt_uid;
 		inode->i_gid = cifs_sb->mnt_gid;
 	} else if (rc) {
-		kfree(full_path);
-		_FreeXid(xid);
 		iget_failed(inode);
-		return ERR_PTR(rc);
+		inode = ERR_PTR(rc);
 	}
 
-
+out:
 	kfree(full_path);
 	/* can not call macro FreeXid here since in a void func
 	 * TODO: This is no longer true
@@ -1314,9 +1319,9 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode)
 	to set uid/gid */
 			inc_nlink(inode);
 			if (pTcon->nocase)
-				direntry->d_op = &cifs_ci_dentry_ops;
+				d_set_d_op(direntry, &cifs_ci_dentry_ops);
 			else
-				direntry->d_op = &cifs_dentry_ops;
+				d_set_d_op(direntry, &cifs_dentry_ops);
 
 			cifs_unix_basic_to_fattr(&fattr, pInfo, cifs_sb);
 			cifs_fill_uniqueid(inode->i_sb, &fattr);
@@ -1358,9 +1363,9 @@ mkdir_get_info:
 						 inode->i_sb, xid, NULL);
 
 		if (pTcon->nocase)
-			direntry->d_op = &cifs_ci_dentry_ops;
+			d_set_d_op(direntry, &cifs_ci_dentry_ops);
 		else
-			direntry->d_op = &cifs_dentry_ops;
+			d_set_d_op(direntry, &cifs_dentry_ops);
 		d_instantiate(direntry, newinode);
 		 /* setting nlink not necessary except in cases where we
 		  * failed to get it from the server or was set bogus */
@@ -1648,6 +1653,7 @@ static bool
 cifs_inode_needs_reval(struct inode *inode)
 {
 	struct cifsInodeInfo *cifs_i = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
 
 	if (cifs_i->clientCanCacheRead)
 		return false;
@@ -1658,19 +1664,21 @@ cifs_inode_needs_reval(struct inode *inode)
 	if (cifs_i->time == 0)
 		return true;
 
-	/* FIXME: the actimeo should be tunable */
-	if (time_after_eq(jiffies, cifs_i->time + HZ))
+	if (!time_in_range(jiffies, cifs_i->time,
+				cifs_i->time + cifs_sb->actimeo))
 		return true;
 
 	/* hardlinked files w/ noserverino get "special" treatment */
-	if (!(CIFS_SB(inode->i_sb)->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) &&
+	if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) &&
 	    S_ISREG(inode->i_mode) && inode->i_nlink != 1)
 		return true;
 
 	return false;
 }
 
-/* check invalid_mapping flag and zap the cache if it's set */
+/*
+ * Zap the cache. Called when invalid_mapping flag is set.
+ */
 static void
 cifs_invalidate_mapping(struct inode *inode)
 {
@@ -2114,11 +2122,16 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
 
 	if (attrs->ia_valid & ATTR_MODE) {
 		rc = 0;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
-			rc = mode_to_acl(inode, full_path, mode);
-		else
-#endif
+#ifdef CONFIG_CIFS_ACL
+		if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+			rc = mode_to_cifs_acl(inode, full_path, mode);
+			if (rc) {
+				cFYI(1, "%s: Setting ACL failed with error: %d",
+					__func__, rc);
+				goto cifs_setattr_exit;
+			}
+		} else
+#endif /* CONFIG_CIFS_ACL */
 		if (((mode & S_IWUGO) == 0) &&
 		    (cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
 
@@ -2177,7 +2190,6 @@ cifs_setattr_nounix(struct dentry *direntry, struct iattr *attrs)
 
 	setattr_copy(inode, attrs);
 	mark_inode_dirty(inode);
-	return 0;
 
 cifs_setattr_exit:
 	kfree(full_path);
diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 2fa22f20cfc..0c98672d012 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -38,10 +38,10 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
 	struct cifs_sb_info *cifs_sb;
 #ifdef CONFIG_CIFS_POSIX
 	struct cifsFileInfo *pSMBFile = filep->private_data;
-	struct cifsTconInfo *tcon = tlink_tcon(pSMBFile->tlink);
+	struct cifsTconInfo *tcon;
 	__u64	ExtAttrBits = 0;
 	__u64	ExtAttrMask = 0;
-	__u64   caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
+	__u64   caps;
 #endif /* CONFIG_CIFS_POSIX */
 
 	xid = GetXid();
@@ -62,6 +62,10 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
 			break;
 #ifdef CONFIG_CIFS_POSIX
 		case FS_IOC_GETFLAGS:
+			if (pSMBFile == NULL)
+				break;
+			tcon = tlink_tcon(pSMBFile->tlink);
+			caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
 			if (CIFS_UNIX_EXTATTR_CAP & caps) {
 				rc = CIFSGetExtAttr(xid, tcon, pSMBFile->netfid,
 					&ExtAttrBits, &ExtAttrMask);
@@ -73,6 +77,10 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
 			break;
 
 		case FS_IOC_SETFLAGS:
+			if (pSMBFile == NULL)
+				break;
+			tcon = tlink_tcon(pSMBFile->tlink);
+			caps = le64_to_cpu(tcon->fsUnixInfo.Capability);
 			if (CIFS_UNIX_EXTATTR_CAP & caps) {
 				if (get_user(ExtAttrBits, (int __user *)arg)) {
 					rc = -EFAULT;
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 85cdbf831e7..fe2f6a93c49 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -525,9 +525,9 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname)
 			      rc);
 		} else {
 			if (pTcon->nocase)
-				direntry->d_op = &cifs_ci_dentry_ops;
+				d_set_d_op(direntry, &cifs_ci_dentry_ops);
 			else
-				direntry->d_op = &cifs_dentry_ops;
+				d_set_d_op(direntry, &cifs_dentry_ops);
 			d_instantiate(direntry, newinode);
 		}
 	}
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index ef7bb7b50f5..ec5b68e3b92 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -79,7 +79,7 @@ cifs_readdir_lookup(struct dentry *parent, struct qstr *name,
 	cFYI(1, "For %s", name->name);
 
 	if (parent->d_op && parent->d_op->d_hash)
-		parent->d_op->d_hash(parent, name);
+		parent->d_op->d_hash(parent, parent->d_inode, name);
 	else
 		name->hash = full_name_hash(name->name, name->len);
 
@@ -103,9 +103,9 @@ cifs_readdir_lookup(struct dentry *parent, struct qstr *name,
 	}
 
 	if (cifs_sb_master_tcon(CIFS_SB(sb))->nocase)
-		dentry->d_op = &cifs_ci_dentry_ops;
+		d_set_d_op(dentry, &cifs_ci_dentry_ops);
 	else
-		dentry->d_op = &cifs_dentry_ops;
+		d_set_d_op(dentry, &cifs_dentry_ops);
 
 	alias = d_materialise_unique(dentry, inode);
 	if (alias != NULL) {
@@ -226,26 +226,29 @@ static int initiate_cifs_search(const int xid, struct file *file)
 	char *full_path = NULL;
 	struct cifsFileInfo *cifsFile;
 	struct cifs_sb_info *cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
-	struct tcon_link *tlink;
+	struct tcon_link *tlink = NULL;
 	struct cifsTconInfo *pTcon;
 
-	tlink = cifs_sb_tlink(cifs_sb);
-	if (IS_ERR(tlink))
-		return PTR_ERR(tlink);
-	pTcon = tlink_tcon(tlink);
-
-	if (file->private_data == NULL)
-		file->private_data =
-			kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
 	if (file->private_data == NULL) {
-		rc = -ENOMEM;
-		goto error_exit;
+		tlink = cifs_sb_tlink(cifs_sb);
+		if (IS_ERR(tlink))
+			return PTR_ERR(tlink);
+
+		cifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+		if (cifsFile == NULL) {
+			rc = -ENOMEM;
+			goto error_exit;
+		}
+		file->private_data = cifsFile;
+		cifsFile->tlink = cifs_get_tlink(tlink);
+		pTcon = tlink_tcon(tlink);
+	} else {
+		cifsFile = file->private_data;
+		pTcon = tlink_tcon(cifsFile->tlink);
 	}
 
-	cifsFile = file->private_data;
 	cifsFile->invalidHandle = true;
 	cifsFile->srch_inf.endOfSearch = false;
-	cifsFile->tlink = cifs_get_tlink(tlink);
 
 	full_path = build_path_from_dentry(file->f_path.dentry);
 	if (full_path == NULL) {
@@ -756,18 +759,6 @@ static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir,
 	rc = filldir(direntry, qstring.name, qstring.len, file->f_pos,
 		     ino, fattr.cf_dtype);
 
-	/*
-	 * we can not return filldir errors to the caller since they are
-	 * "normal" when the stat blocksize is too small - we return remapped
-	 * error instead
-	 *
-	 * FIXME: This looks bogus. filldir returns -EOVERFLOW in the above
-	 * case already. Why should we be clobbering other errors from it?
-	 */
-	if (rc) {
-		cFYI(1, "filldir rc = %d", rc);
-		rc = -EOVERFLOW;
-	}
 	dput(tmp_dentry);
 	return rc;
 }
diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c
index a264b744bb4..eae2a149160 100644
--- a/fs/cifs/xattr.c
+++ b/fs/cifs/xattr.c
@@ -30,10 +30,11 @@
 
 #define MAX_EA_VALUE_SIZE 65535
 #define CIFS_XATTR_DOS_ATTRIB "user.DosAttrib"
+#define CIFS_XATTR_CIFS_ACL "system.cifs_acl"
 #define CIFS_XATTR_USER_PREFIX "user."
 #define CIFS_XATTR_SYSTEM_PREFIX "system."
 #define CIFS_XATTR_OS2_PREFIX "os2."
-#define CIFS_XATTR_SECURITY_PREFIX ".security"
+#define CIFS_XATTR_SECURITY_PREFIX "security."
 #define CIFS_XATTR_TRUSTED_PREFIX "trusted."
 #define XATTR_TRUSTED_PREFIX_LEN  8
 #define XATTR_SECURITY_PREFIX_LEN 9
@@ -277,29 +278,8 @@ ssize_t cifs_getxattr(struct dentry *direntry, const char *ea_name,
 				cifs_sb->local_nls,
 				cifs_sb->mnt_cifs_flags &
 					CIFS_MOUNT_MAP_SPECIAL_CHR);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-		else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
-			__u16 fid;
-			int oplock = 0;
-			struct cifs_ntsd *pacl = NULL;
-			__u32 buflen = 0;
-			if (experimEnabled)
-				rc = CIFSSMBOpen(xid, pTcon, full_path,
-					FILE_OPEN, GENERIC_READ, 0, &fid,
-					&oplock, NULL, cifs_sb->local_nls,
-					cifs_sb->mnt_cifs_flags &
-					CIFS_MOUNT_MAP_SPECIAL_CHR);
-			/* else rc is EOPNOTSUPP from above */
-
-			if (rc == 0) {
-				rc = CIFSSMBGetCIFSACL(xid, pTcon, fid, &pacl,
-						      &buflen);
-				CIFSSMBClose(xid, pTcon, fid);
-			}
-		}
-#endif /* EXPERIMENTAL */
 #else
-		cFYI(1, "query POSIX ACL not supported yet");
+		cFYI(1, "Query POSIX ACL not supported yet");
 #endif /* CONFIG_CIFS_POSIX */
 	} else if (strncmp(ea_name, POSIX_ACL_XATTR_DEFAULT,
 			  strlen(POSIX_ACL_XATTR_DEFAULT)) == 0) {
@@ -311,8 +291,33 @@ ssize_t cifs_getxattr(struct dentry *direntry, const char *ea_name,
 				cifs_sb->mnt_cifs_flags &
 					CIFS_MOUNT_MAP_SPECIAL_CHR);
 #else
-		cFYI(1, "query POSIX default ACL not supported yet");
-#endif
+		cFYI(1, "Query POSIX default ACL not supported yet");
+#endif /* CONFIG_CIFS_POSIX */
+	} else if (strncmp(ea_name, CIFS_XATTR_CIFS_ACL,
+				strlen(CIFS_XATTR_CIFS_ACL)) == 0) {
+#ifdef CONFIG_CIFS_ACL
+			u32 acllen;
+			struct cifs_ntsd *pacl;
+
+			pacl = get_cifs_acl(cifs_sb, direntry->d_inode,
+						full_path, &acllen);
+			if (IS_ERR(pacl)) {
+				rc = PTR_ERR(pacl);
+				cERROR(1, "%s: error %zd getting sec desc",
+						__func__, rc);
+			} else {
+				if (ea_value) {
+					if (acllen > buf_size)
+						acllen = -ERANGE;
+					else
+						memcpy(ea_value, pacl, acllen);
+				}
+				rc = acllen;
+				kfree(pacl);
+			}
+#else
+		cFYI(1, "Query CIFS ACL not supported yet");
+#endif /* CONFIG_CIFS_ACL */
 	} else if (strncmp(ea_name,
 		  CIFS_XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) == 0) {
 		cFYI(1, "Trusted xattr namespace not supported yet");
diff --git a/fs/coda/cache.c b/fs/coda/cache.c
index 9060f08e70c..5525e1c660f 100644
--- a/fs/coda/cache.c
+++ b/fs/coda/cache.c
@@ -93,7 +93,7 @@ static void coda_flag_children(struct dentry *parent, int flag)
 	struct list_head *child;
 	struct dentry *de;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&parent->d_lock);
 	list_for_each(child, &parent->d_subdirs)
 	{
 		de = list_entry(child, struct dentry, d_u.d_child);
@@ -102,7 +102,7 @@ static void coda_flag_children(struct dentry *parent, int flag)
 			continue;
 		coda_flag_inode(de->d_inode, flag);
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&parent->d_lock);
 	return; 
 }
 
diff --git a/fs/coda/dir.c b/fs/coda/dir.c
index 5d8b3553960..29badd91360 100644
--- a/fs/coda/dir.c
+++ b/fs/coda/dir.c
@@ -18,6 +18,7 @@
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/spinlock.h>
+#include <linux/namei.h>
 
 #include <asm/uaccess.h>
 
@@ -47,7 +48,7 @@ static int coda_readdir(struct file *file, void *buf, filldir_t filldir);
 
 /* dentry ops */
 static int coda_dentry_revalidate(struct dentry *de, struct nameidata *nd);
-static int coda_dentry_delete(struct dentry *);
+static int coda_dentry_delete(const struct dentry *);
 
 /* support routines */
 static int coda_venus_readdir(struct file *coda_file, void *buf,
@@ -125,7 +126,7 @@ static struct dentry *coda_lookup(struct inode *dir, struct dentry *entry, struc
 		return ERR_PTR(error);
 
 exit:
-	entry->d_op = &coda_dentry_operations;
+	d_set_d_op(entry, &coda_dentry_operations);
 
 	if (inode && (type & CODA_NOCACHE))
 		coda_flag_inode(inode, C_VATTR | C_PURGE);
@@ -134,10 +135,13 @@ exit:
 }
 
 
-int coda_permission(struct inode *inode, int mask)
+int coda_permission(struct inode *inode, int mask, unsigned int flags)
 {
 	int error;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	mask &= MAY_READ | MAY_WRITE | MAY_EXEC;
  
 	if (!mask)
@@ -541,9 +545,13 @@ out:
 /* called when a cache lookup succeeds */
 static int coda_dentry_revalidate(struct dentry *de, struct nameidata *nd)
 {
-	struct inode *inode = de->d_inode;
+	struct inode *inode;
 	struct coda_inode_info *cii;
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	inode = de->d_inode;
 	if (!inode || coda_isroot(inode))
 		goto out;
 	if (is_bad_inode(inode))
@@ -559,7 +567,7 @@ static int coda_dentry_revalidate(struct dentry *de, struct nameidata *nd)
 	if (cii->c_flags & C_FLUSH) 
 		coda_flag_inode_children(inode, C_FLUSH);
 
-	if (atomic_read(&de->d_count) > 1)
+	if (de->d_count > 1)
 		/* pretend it's valid, but don't change the flags */
 		goto out;
 
@@ -577,7 +585,7 @@ out:
  * This is the callback from dput() when d_count is going to 0.
  * We use this to unhash dentries with bad inodes.
  */
-static int coda_dentry_delete(struct dentry * dentry)
+static int coda_dentry_delete(const struct dentry * dentry)
 {
 	int flags;
 
diff --git a/fs/coda/inode.c b/fs/coda/inode.c
index 5ea57c8c7f9..50dc7d189f5 100644
--- a/fs/coda/inode.c
+++ b/fs/coda/inode.c
@@ -56,11 +56,18 @@ static struct inode *coda_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void coda_destroy_inode(struct inode *inode)
+static void coda_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(coda_inode_cachep, ITOC(inode));
 }
 
+static void coda_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, coda_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct coda_inode_info *ei = (struct coda_inode_info *) foo;
diff --git a/fs/coda/pioctl.c b/fs/coda/pioctl.c
index 2fd89b5c5c7..741f0bd0391 100644
--- a/fs/coda/pioctl.c
+++ b/fs/coda/pioctl.c
@@ -24,7 +24,7 @@
 #include <linux/coda_psdev.h>
 
 /* pioctl ops */
-static int coda_ioctl_permission(struct inode *inode, int mask);
+static int coda_ioctl_permission(struct inode *inode, int mask, unsigned int flags);
 static long coda_pioctl(struct file *filp, unsigned int cmd,
 			unsigned long user_data);
 
@@ -41,8 +41,10 @@ const struct file_operations coda_ioctl_operations = {
 };
 
 /* the coda pioctl inode ops */
-static int coda_ioctl_permission(struct inode *inode, int mask)
+static int coda_ioctl_permission(struct inode *inode, int mask, unsigned int flags)
 {
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
 	return (mask & MAY_EXEC) ? -EACCES : 0;
 }
 
diff --git a/fs/compat.c b/fs/compat.c
index c580c322fa6..eb1740ac8c0 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1350,6 +1350,10 @@ static int compat_count(compat_uptr_t __user *argv, int max)
 			argv++;
 			if (i++ >= max)
 				return -E2BIG;
+
+			if (fatal_signal_pending(current))
+				return -ERESTARTNOHAND;
+			cond_resched();
 		}
 	}
 	return i;
@@ -1391,6 +1395,12 @@ static int compat_copy_strings(int argc, compat_uptr_t __user *argv,
 		while (len > 0) {
 			int offset, bytes_to_copy;
 
+			if (fatal_signal_pending(current)) {
+				ret = -ERESTARTNOHAND;
+				goto out;
+			}
+			cond_resched();
+
 			offset = pos % PAGE_SIZE;
 			if (offset == 0)
 				offset = PAGE_SIZE;
@@ -1407,18 +1417,8 @@ static int compat_copy_strings(int argc, compat_uptr_t __user *argv,
 			if (!kmapped_page || kpos != (pos & PAGE_MASK)) {
 				struct page *page;
 
-#ifdef CONFIG_STACK_GROWSUP
-				ret = expand_stack_downwards(bprm->vma, pos);
-				if (ret < 0) {
-					/* We've exceed the stack rlimit. */
-					ret = -E2BIG;
-					goto out;
-				}
-#endif
-				ret = get_user_pages(current, bprm->mm, pos,
-						     1, 1, 1, &page, NULL);
-				if (ret <= 0) {
-					/* We've exceed the stack rlimit. */
+				page = get_arg_page(bprm, pos, 1);
+				if (!page) {
 					ret = -E2BIG;
 					goto out;
 				}
@@ -1539,8 +1539,10 @@ int compat_do_execve(char * filename,
 	return retval;
 
 out:
-	if (bprm->mm)
+	if (bprm->mm) {
+		acct_arg_size(bprm, 0);
 		mmput(bprm->mm);
+	}
 
 out_file:
 	if (bprm->file) {
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 410ed188faa..61abb638b4b 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -19,7 +19,6 @@
 #include <linux/compiler.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
-#include <linux/smp_lock.h>
 #include <linux/ioctl.h>
 #include <linux/if.h>
 #include <linux/if_bridge.h>
@@ -43,7 +42,7 @@
 #include <linux/tty.h>
 #include <linux/vt_kern.h>
 #include <linux/fb.h>
-#include <linux/videodev.h>
+#include <linux/videodev2.h>
 #include <linux/netdevice.h>
 #include <linux/raw.h>
 #include <linux/blkdev.h>
@@ -837,6 +836,7 @@ COMPATIBLE_IOCTL(TCSETSW)
 COMPATIBLE_IOCTL(TCSETSF)
 COMPATIBLE_IOCTL(TIOCLINUX)
 COMPATIBLE_IOCTL(TIOCSBRK)
+COMPATIBLE_IOCTL(TIOCGDEV)
 COMPATIBLE_IOCTL(TIOCCBRK)
 COMPATIBLE_IOCTL(TIOCGSID)
 COMPATIBLE_IOCTL(TIOCGICOUNT)
diff --git a/fs/configfs/configfs_internal.h b/fs/configfs/configfs_internal.h
index da6061a6df4..026cf68553a 100644
--- a/fs/configfs/configfs_internal.h
+++ b/fs/configfs/configfs_internal.h
@@ -120,7 +120,7 @@ static inline struct config_item *configfs_get_config_item(struct dentry *dentry
 {
 	struct config_item * item = NULL;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&dentry->d_lock);
 	if (!d_unhashed(dentry)) {
 		struct configfs_dirent * sd = dentry->d_fsdata;
 		if (sd->s_type & CONFIGFS_ITEM_LINK) {
@@ -129,7 +129,7 @@ static inline struct config_item *configfs_get_config_item(struct dentry *dentry
 		} else
 			item = config_item_get(sd->s_element);
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dentry->d_lock);
 
 	return item;
 }
diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 0b502f80c69..36637a8c1ed 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -67,7 +67,7 @@ static void configfs_d_iput(struct dentry * dentry,
  * We _must_ delete our dentries on last dput, as the chain-to-parent
  * behavior is required to clear the parents of default_groups.
  */
-static int configfs_d_delete(struct dentry *dentry)
+static int configfs_d_delete(const struct dentry *dentry)
 {
 	return 1;
 }
@@ -232,10 +232,8 @@ int configfs_make_dirent(struct configfs_dirent * parent_sd,
 
 	sd->s_mode = mode;
 	sd->s_dentry = dentry;
-	if (dentry) {
+	if (dentry)
 		dentry->d_fsdata = configfs_get(sd);
-		dentry->d_op = &configfs_dentry_ops;
-	}
 
 	return 0;
 }
@@ -278,7 +276,6 @@ static int create_dir(struct config_item * k, struct dentry * p,
 		error = configfs_create(d, mode, init_dir);
 		if (!error) {
 			inc_nlink(p->d_inode);
-			(d)->d_op = &configfs_dentry_ops;
 		} else {
 			struct configfs_dirent *sd = d->d_fsdata;
 			if (sd) {
@@ -371,9 +368,7 @@ int configfs_create_link(struct configfs_symlink *sl,
 				   CONFIGFS_ITEM_LINK);
 	if (!err) {
 		err = configfs_create(dentry, mode, init_symlink);
-		if (!err)
-			dentry->d_op = &configfs_dentry_ops;
-		else {
+		if (err) {
 			struct configfs_dirent *sd = dentry->d_fsdata;
 			if (sd) {
 				spin_lock(&configfs_dirent_lock);
@@ -399,8 +394,7 @@ static void remove_dir(struct dentry * d)
 	if (d->d_inode)
 		simple_rmdir(parent->d_inode,d);
 
-	pr_debug(" o %s removing done (%d)\n",d->d_name.name,
-		 atomic_read(&d->d_count));
+	pr_debug(" o %s removing done (%d)\n",d->d_name.name, d->d_count);
 
 	dput(parent);
 }
@@ -448,7 +442,7 @@ static int configfs_attach_attr(struct configfs_dirent * sd, struct dentry * den
 		return error;
 	}
 
-	dentry->d_op = &configfs_dentry_ops;
+	d_set_d_op(dentry, &configfs_dentry_ops);
 	d_rehash(dentry);
 
 	return 0;
@@ -493,7 +487,11 @@ static struct dentry * configfs_lookup(struct inode *dir,
 		 * If it doesn't exist and it isn't a NOT_PINNED item,
 		 * it must be negative.
 		 */
-		return simple_lookup(dir, dentry, nd);
+		if (dentry->d_name.len > NAME_MAX)
+			return ERR_PTR(-ENAMETOOLONG);
+		d_set_d_op(dentry, &configfs_dentry_ops);
+		d_add(dentry, NULL);
+		return NULL;
 	}
 
 out:
@@ -685,6 +683,7 @@ static int create_default_group(struct config_group *parent_group,
 	ret = -ENOMEM;
 	child = d_alloc(parent, &name);
 	if (child) {
+		d_set_d_op(child, &configfs_dentry_ops);
 		d_add(child, NULL);
 
 		ret = configfs_attach_group(&parent_group->cg_item,
@@ -1682,6 +1681,7 @@ int configfs_register_subsystem(struct configfs_subsystem *subsys)
 	err = -ENOMEM;
 	dentry = d_alloc(configfs_sb->s_root, &name);
 	if (dentry) {
+		d_set_d_op(dentry, &configfs_dentry_ops);
 		d_add(dentry, NULL);
 
 		err = configfs_attach_group(sd->s_element, &group->cg_item,
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index 253476d78ed..c83f4768eea 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -250,18 +250,14 @@ void configfs_drop_dentry(struct configfs_dirent * sd, struct dentry * parent)
 	struct dentry * dentry = sd->s_dentry;
 
 	if (dentry) {
-		spin_lock(&dcache_lock);
 		spin_lock(&dentry->d_lock);
 		if (!(d_unhashed(dentry) && dentry->d_inode)) {
-			dget_locked(dentry);
+			dget_dlock(dentry);
 			__d_drop(dentry);
 			spin_unlock(&dentry->d_lock);
-			spin_unlock(&dcache_lock);
 			simple_unlink(parent->d_inode, dentry);
-		} else {
+		} else
 			spin_unlock(&dentry->d_lock);
-			spin_unlock(&dcache_lock);
-		}
 	}
 }
 
diff --git a/fs/dcache.c b/fs/dcache.c
index 23702a9d4e6..5699d4c027c 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -33,20 +33,58 @@
 #include <linux/bootmem.h>
 #include <linux/fs_struct.h>
 #include <linux/hardirq.h>
+#include <linux/bit_spinlock.h>
+#include <linux/rculist_bl.h>
 #include "internal.h"
 
+/*
+ * Usage:
+ * dcache->d_inode->i_lock protects:
+ *   - i_dentry, d_alias, d_inode of aliases
+ * dcache_hash_bucket lock protects:
+ *   - the dcache hash table
+ * s_anon bl list spinlock protects:
+ *   - the s_anon list (see __d_drop)
+ * dcache_lru_lock protects:
+ *   - the dcache lru lists and counters
+ * d_lock protects:
+ *   - d_flags
+ *   - d_name
+ *   - d_lru
+ *   - d_count
+ *   - d_unhashed()
+ *   - d_parent and d_subdirs
+ *   - childrens' d_child and d_parent
+ *   - d_alias, d_inode
+ *
+ * Ordering:
+ * dentry->d_inode->i_lock
+ *   dentry->d_lock
+ *     dcache_lru_lock
+ *     dcache_hash_bucket lock
+ *     s_anon lock
+ *
+ * If there is an ancestor relationship:
+ * dentry->d_parent->...->d_parent->d_lock
+ *   ...
+ *     dentry->d_parent->d_lock
+ *       dentry->d_lock
+ *
+ * If no ancestor relationship:
+ * if (dentry1 < dentry2)
+ *   dentry1->d_lock
+ *     dentry2->d_lock
+ */
 int sysctl_vfs_cache_pressure __read_mostly = 100;
 EXPORT_SYMBOL_GPL(sysctl_vfs_cache_pressure);
 
- __cacheline_aligned_in_smp DEFINE_SPINLOCK(dcache_lock);
+static __cacheline_aligned_in_smp DEFINE_SPINLOCK(dcache_lru_lock);
 __cacheline_aligned_in_smp DEFINE_SEQLOCK(rename_lock);
 
-EXPORT_SYMBOL(dcache_lock);
+EXPORT_SYMBOL(rename_lock);
 
 static struct kmem_cache *dentry_cache __read_mostly;
 
-#define DNAME_INLINE_LEN (sizeof(struct dentry)-offsetof(struct dentry,d_iname))
-
 /*
  * This is the single most critical data structure when it comes
  * to the dcache: the hashtable for lookups. Somebody should try
@@ -60,22 +98,51 @@ static struct kmem_cache *dentry_cache __read_mostly;
 
 static unsigned int d_hash_mask __read_mostly;
 static unsigned int d_hash_shift __read_mostly;
-static struct hlist_head *dentry_hashtable __read_mostly;
+
+struct dcache_hash_bucket {
+	struct hlist_bl_head head;
+};
+static struct dcache_hash_bucket *dentry_hashtable __read_mostly;
+
+static inline struct dcache_hash_bucket *d_hash(struct dentry *parent,
+					unsigned long hash)
+{
+	hash += ((unsigned long) parent ^ GOLDEN_RATIO_PRIME) / L1_CACHE_BYTES;
+	hash = hash ^ ((hash ^ GOLDEN_RATIO_PRIME) >> D_HASHBITS);
+	return dentry_hashtable + (hash & D_HASHMASK);
+}
+
+static inline void spin_lock_bucket(struct dcache_hash_bucket *b)
+{
+	bit_spin_lock(0, (unsigned long *)&b->head.first);
+}
+
+static inline void spin_unlock_bucket(struct dcache_hash_bucket *b)
+{
+	__bit_spin_unlock(0, (unsigned long *)&b->head.first);
+}
 
 /* Statistics gathering. */
 struct dentry_stat_t dentry_stat = {
 	.age_limit = 45,
 };
 
-static struct percpu_counter nr_dentry __cacheline_aligned_in_smp;
-static struct percpu_counter nr_dentry_unused __cacheline_aligned_in_smp;
+static DEFINE_PER_CPU(unsigned int, nr_dentry);
 
 #if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
+static int get_nr_dentry(void)
+{
+	int i;
+	int sum = 0;
+	for_each_possible_cpu(i)
+		sum += per_cpu(nr_dentry, i);
+	return sum < 0 ? 0 : sum;
+}
+
 int proc_nr_dentry(ctl_table *table, int write, void __user *buffer,
 		   size_t *lenp, loff_t *ppos)
 {
-	dentry_stat.nr_dentry = percpu_counter_sum_positive(&nr_dentry);
-	dentry_stat.nr_unused = percpu_counter_sum_positive(&nr_dentry_unused);
+	dentry_stat.nr_dentry = get_nr_dentry();
 	return proc_dointvec(table, write, buffer, lenp, ppos);
 }
 #endif
@@ -91,35 +158,50 @@ static void __d_free(struct rcu_head *head)
 }
 
 /*
- * no dcache_lock, please.
+ * no locks, please.
  */
 static void d_free(struct dentry *dentry)
 {
-	percpu_counter_dec(&nr_dentry);
+	BUG_ON(dentry->d_count);
+	this_cpu_dec(nr_dentry);
 	if (dentry->d_op && dentry->d_op->d_release)
 		dentry->d_op->d_release(dentry);
 
 	/* if dentry was never inserted into hash, immediate free is OK */
-	if (hlist_unhashed(&dentry->d_hash))
+	if (hlist_bl_unhashed(&dentry->d_hash))
 		__d_free(&dentry->d_u.d_rcu);
 	else
 		call_rcu(&dentry->d_u.d_rcu, __d_free);
 }
 
+/**
+ * dentry_rcuwalk_barrier - invalidate in-progress rcu-walk lookups
+ * After this call, in-progress rcu-walk path lookup will fail. This
+ * should be called after unhashing, and after changing d_inode (if
+ * the dentry has not already been unhashed).
+ */
+static inline void dentry_rcuwalk_barrier(struct dentry *dentry)
+{
+	assert_spin_locked(&dentry->d_lock);
+	/* Go through a barrier */
+	write_seqcount_barrier(&dentry->d_seq);
+}
+
 /*
  * Release the dentry's inode, using the filesystem
- * d_iput() operation if defined.
+ * d_iput() operation if defined. Dentry has no refcount
+ * and is unhashed.
  */
 static void dentry_iput(struct dentry * dentry)
 	__releases(dentry->d_lock)
-	__releases(dcache_lock)
+	__releases(dentry->d_inode->i_lock)
 {
 	struct inode *inode = dentry->d_inode;
 	if (inode) {
 		dentry->d_inode = NULL;
 		list_del_init(&dentry->d_alias);
 		spin_unlock(&dentry->d_lock);
-		spin_unlock(&dcache_lock);
+		spin_unlock(&inode->i_lock);
 		if (!inode->i_nlink)
 			fsnotify_inoderemove(inode);
 		if (dentry->d_op && dentry->d_op->d_iput)
@@ -128,40 +210,72 @@ static void dentry_iput(struct dentry * dentry)
 			iput(inode);
 	} else {
 		spin_unlock(&dentry->d_lock);
-		spin_unlock(&dcache_lock);
 	}
 }
 
 /*
- * dentry_lru_(add|del|move_tail) must be called with dcache_lock held.
+ * Release the dentry's inode, using the filesystem
+ * d_iput() operation if defined. dentry remains in-use.
+ */
+static void dentry_unlink_inode(struct dentry * dentry)
+	__releases(dentry->d_lock)
+	__releases(dentry->d_inode->i_lock)
+{
+	struct inode *inode = dentry->d_inode;
+	dentry->d_inode = NULL;
+	list_del_init(&dentry->d_alias);
+	dentry_rcuwalk_barrier(dentry);
+	spin_unlock(&dentry->d_lock);
+	spin_unlock(&inode->i_lock);
+	if (!inode->i_nlink)
+		fsnotify_inoderemove(inode);
+	if (dentry->d_op && dentry->d_op->d_iput)
+		dentry->d_op->d_iput(dentry, inode);
+	else
+		iput(inode);
+}
+
+/*
+ * dentry_lru_(add|del|move_tail) must be called with d_lock held.
  */
 static void dentry_lru_add(struct dentry *dentry)
 {
 	if (list_empty(&dentry->d_lru)) {
+		spin_lock(&dcache_lru_lock);
 		list_add(&dentry->d_lru, &dentry->d_sb->s_dentry_lru);
 		dentry->d_sb->s_nr_dentry_unused++;
-		percpu_counter_inc(&nr_dentry_unused);
+		dentry_stat.nr_unused++;
+		spin_unlock(&dcache_lru_lock);
 	}
 }
 
+static void __dentry_lru_del(struct dentry *dentry)
+{
+	list_del_init(&dentry->d_lru);
+	dentry->d_sb->s_nr_dentry_unused--;
+	dentry_stat.nr_unused--;
+}
+
 static void dentry_lru_del(struct dentry *dentry)
 {
 	if (!list_empty(&dentry->d_lru)) {
-		list_del_init(&dentry->d_lru);
-		dentry->d_sb->s_nr_dentry_unused--;
-		percpu_counter_dec(&nr_dentry_unused);
+		spin_lock(&dcache_lru_lock);
+		__dentry_lru_del(dentry);
+		spin_unlock(&dcache_lru_lock);
 	}
 }
 
 static void dentry_lru_move_tail(struct dentry *dentry)
 {
+	spin_lock(&dcache_lru_lock);
 	if (list_empty(&dentry->d_lru)) {
 		list_add_tail(&dentry->d_lru, &dentry->d_sb->s_dentry_lru);
 		dentry->d_sb->s_nr_dentry_unused++;
-		percpu_counter_inc(&nr_dentry_unused);
+		dentry_stat.nr_unused++;
 	} else {
 		list_move_tail(&dentry->d_lru, &dentry->d_sb->s_dentry_lru);
 	}
+	spin_unlock(&dcache_lru_lock);
 }
 
 /**
@@ -171,22 +285,115 @@ static void dentry_lru_move_tail(struct dentry *dentry)
  * The dentry must already be unhashed and removed from the LRU.
  *
  * If this is the root of the dentry tree, return NULL.
+ *
+ * dentry->d_lock and parent->d_lock must be held by caller, and are dropped by
+ * d_kill.
  */
-static struct dentry *d_kill(struct dentry *dentry)
+static struct dentry *d_kill(struct dentry *dentry, struct dentry *parent)
 	__releases(dentry->d_lock)
-	__releases(dcache_lock)
+	__releases(parent->d_lock)
+	__releases(dentry->d_inode->i_lock)
 {
-	struct dentry *parent;
-
+	dentry->d_parent = NULL;
 	list_del(&dentry->d_u.d_child);
-	/*drops the locks, at that point nobody can reach this dentry */
+	if (parent)
+		spin_unlock(&parent->d_lock);
 	dentry_iput(dentry);
+	/*
+	 * dentry_iput drops the locks, at which point nobody (except
+	 * transient RCU lookups) can reach this dentry.
+	 */
+	d_free(dentry);
+	return parent;
+}
+
+/**
+ * d_drop - drop a dentry
+ * @dentry: dentry to drop
+ *
+ * d_drop() unhashes the entry from the parent dentry hashes, so that it won't
+ * be found through a VFS lookup any more. Note that this is different from
+ * deleting the dentry - d_delete will try to mark the dentry negative if
+ * possible, giving a successful _negative_ lookup, while d_drop will
+ * just make the cache lookup fail.
+ *
+ * d_drop() is used mainly for stuff that wants to invalidate a dentry for some
+ * reason (NFS timeouts or autofs deletes).
+ *
+ * __d_drop requires dentry->d_lock.
+ */
+void __d_drop(struct dentry *dentry)
+{
+	if (!(dentry->d_flags & DCACHE_UNHASHED)) {
+		if (unlikely(dentry->d_flags & DCACHE_DISCONNECTED)) {
+			bit_spin_lock(0,
+				(unsigned long *)&dentry->d_sb->s_anon.first);
+			dentry->d_flags |= DCACHE_UNHASHED;
+			hlist_bl_del_init(&dentry->d_hash);
+			__bit_spin_unlock(0,
+				(unsigned long *)&dentry->d_sb->s_anon.first);
+		} else {
+			struct dcache_hash_bucket *b;
+			b = d_hash(dentry->d_parent, dentry->d_name.hash);
+			spin_lock_bucket(b);
+			/*
+			 * We may not actually need to put DCACHE_UNHASHED
+			 * manipulations under the hash lock, but follow
+			 * the principle of least surprise.
+			 */
+			dentry->d_flags |= DCACHE_UNHASHED;
+			hlist_bl_del_rcu(&dentry->d_hash);
+			spin_unlock_bucket(b);
+			dentry_rcuwalk_barrier(dentry);
+		}
+	}
+}
+EXPORT_SYMBOL(__d_drop);
+
+void d_drop(struct dentry *dentry)
+{
+	spin_lock(&dentry->d_lock);
+	__d_drop(dentry);
+	spin_unlock(&dentry->d_lock);
+}
+EXPORT_SYMBOL(d_drop);
+
+/*
+ * Finish off a dentry we've decided to kill.
+ * dentry->d_lock must be held, returns with it unlocked.
+ * If ref is non-zero, then decrement the refcount too.
+ * Returns dentry requiring refcount drop, or NULL if we're done.
+ */
+static inline struct dentry *dentry_kill(struct dentry *dentry, int ref)
+	__releases(dentry->d_lock)
+{
+	struct inode *inode;
+	struct dentry *parent;
+
+	inode = dentry->d_inode;
+	if (inode && !spin_trylock(&inode->i_lock)) {
+relock:
+		spin_unlock(&dentry->d_lock);
+		cpu_relax();
+		return dentry; /* try again with same dentry */
+	}
 	if (IS_ROOT(dentry))
 		parent = NULL;
 	else
 		parent = dentry->d_parent;
-	d_free(dentry);
-	return parent;
+	if (parent && !spin_trylock(&parent->d_lock)) {
+		if (inode)
+			spin_unlock(&inode->i_lock);
+		goto relock;
+	}
+
+	if (ref)
+		dentry->d_count--;
+	/* if dentry was on the d_lru list delete it from there */
+	dentry_lru_del(dentry);
+	/* if it was on the hash then remove it */
+	__d_drop(dentry);
+	return d_kill(dentry, parent);
 }
 
 /* 
@@ -214,34 +421,26 @@ static struct dentry *d_kill(struct dentry *dentry)
  * call the dentry unlink method as well as removing it from the queues and
  * releasing its resources. If the parent dentries were scheduled for release
  * they too may now get deleted.
- *
- * no dcache lock, please.
  */
-
 void dput(struct dentry *dentry)
 {
 	if (!dentry)
 		return;
 
 repeat:
-	if (atomic_read(&dentry->d_count) == 1)
+	if (dentry->d_count == 1)
 		might_sleep();
-	if (!atomic_dec_and_lock(&dentry->d_count, &dcache_lock))
-		return;
-
 	spin_lock(&dentry->d_lock);
-	if (atomic_read(&dentry->d_count)) {
+	BUG_ON(!dentry->d_count);
+	if (dentry->d_count > 1) {
+		dentry->d_count--;
 		spin_unlock(&dentry->d_lock);
-		spin_unlock(&dcache_lock);
 		return;
 	}
 
-	/*
-	 * AV: ->d_delete() is _NOT_ allowed to block now.
-	 */
-	if (dentry->d_op && dentry->d_op->d_delete) {
+	if (dentry->d_flags & DCACHE_OP_DELETE) {
 		if (dentry->d_op->d_delete(dentry))
-			goto unhash_it;
+			goto kill_it;
 	}
 
 	/* Unreachable? Get rid of it */
@@ -252,16 +451,12 @@ repeat:
 	dentry->d_flags |= DCACHE_REFERENCED;
 	dentry_lru_add(dentry);
 
- 	spin_unlock(&dentry->d_lock);
-	spin_unlock(&dcache_lock);
+	dentry->d_count--;
+	spin_unlock(&dentry->d_lock);
 	return;
 
-unhash_it:
-	__d_drop(dentry);
 kill_it:
-	/* if dentry was on the d_lru list delete it from there */
-	dentry_lru_del(dentry);
-	dentry = d_kill(dentry);
+	dentry = dentry_kill(dentry, 1);
 	if (dentry)
 		goto repeat;
 }
@@ -284,9 +479,9 @@ int d_invalidate(struct dentry * dentry)
 	/*
 	 * If it's already been dropped, return OK.
 	 */
-	spin_lock(&dcache_lock);
+	spin_lock(&dentry->d_lock);
 	if (d_unhashed(dentry)) {
-		spin_unlock(&dcache_lock);
+		spin_unlock(&dentry->d_lock);
 		return 0;
 	}
 	/*
@@ -294,9 +489,9 @@ int d_invalidate(struct dentry * dentry)
 	 * to get rid of unused child entries.
 	 */
 	if (!list_empty(&dentry->d_subdirs)) {
-		spin_unlock(&dcache_lock);
+		spin_unlock(&dentry->d_lock);
 		shrink_dcache_parent(dentry);
-		spin_lock(&dcache_lock);
+		spin_lock(&dentry->d_lock);
 	}
 
 	/*
@@ -309,35 +504,61 @@ int d_invalidate(struct dentry * dentry)
 	 * we might still populate it if it was a
 	 * working directory or similar).
 	 */
-	spin_lock(&dentry->d_lock);
-	if (atomic_read(&dentry->d_count) > 1) {
+	if (dentry->d_count > 1) {
 		if (dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode)) {
 			spin_unlock(&dentry->d_lock);
-			spin_unlock(&dcache_lock);
 			return -EBUSY;
 		}
 	}
 
 	__d_drop(dentry);
 	spin_unlock(&dentry->d_lock);
-	spin_unlock(&dcache_lock);
 	return 0;
 }
 EXPORT_SYMBOL(d_invalidate);
 
-/* This should be called _only_ with dcache_lock held */
-static inline struct dentry * __dget_locked(struct dentry *dentry)
+/* This must be called with d_lock held */
+static inline void __dget_dlock(struct dentry *dentry)
 {
-	atomic_inc(&dentry->d_count);
-	dentry_lru_del(dentry);
-	return dentry;
+	dentry->d_count++;
 }
 
-struct dentry * dget_locked(struct dentry *dentry)
+static inline void __dget(struct dentry *dentry)
 {
-	return __dget_locked(dentry);
+	spin_lock(&dentry->d_lock);
+	__dget_dlock(dentry);
+	spin_unlock(&dentry->d_lock);
+}
+
+struct dentry *dget_parent(struct dentry *dentry)
+{
+	struct dentry *ret;
+
+repeat:
+	/*
+	 * Don't need rcu_dereference because we re-check it was correct under
+	 * the lock.
+	 */
+	rcu_read_lock();
+	ret = dentry->d_parent;
+	if (!ret) {
+		rcu_read_unlock();
+		goto out;
+	}
+	spin_lock(&ret->d_lock);
+	if (unlikely(ret != dentry->d_parent)) {
+		spin_unlock(&ret->d_lock);
+		rcu_read_unlock();
+		goto repeat;
+	}
+	rcu_read_unlock();
+	BUG_ON(!ret->d_count);
+	ret->d_count++;
+	spin_unlock(&ret->d_lock);
+out:
+	return ret;
 }
-EXPORT_SYMBOL(dget_locked);
+EXPORT_SYMBOL(dget_parent);
 
 /**
  * d_find_alias - grab a hashed alias of inode
@@ -355,42 +576,51 @@ EXPORT_SYMBOL(dget_locked);
  * any other hashed alias over that one unless @want_discon is set,
  * in which case only return an IS_ROOT, DCACHE_DISCONNECTED alias.
  */
-
-static struct dentry * __d_find_alias(struct inode *inode, int want_discon)
+static struct dentry *__d_find_alias(struct inode *inode, int want_discon)
 {
-	struct list_head *head, *next, *tmp;
-	struct dentry *alias, *discon_alias=NULL;
+	struct dentry *alias, *discon_alias;
 
-	head = &inode->i_dentry;
-	next = inode->i_dentry.next;
-	while (next != head) {
-		tmp = next;
-		next = tmp->next;
-		prefetch(next);
-		alias = list_entry(tmp, struct dentry, d_alias);
+again:
+	discon_alias = NULL;
+	list_for_each_entry(alias, &inode->i_dentry, d_alias) {
+		spin_lock(&alias->d_lock);
  		if (S_ISDIR(inode->i_mode) || !d_unhashed(alias)) {
 			if (IS_ROOT(alias) &&
-			    (alias->d_flags & DCACHE_DISCONNECTED))
+			    (alias->d_flags & DCACHE_DISCONNECTED)) {
 				discon_alias = alias;
-			else if (!want_discon) {
-				__dget_locked(alias);
+			} else if (!want_discon) {
+				__dget_dlock(alias);
+				spin_unlock(&alias->d_lock);
+				return alias;
+			}
+		}
+		spin_unlock(&alias->d_lock);
+	}
+	if (discon_alias) {
+		alias = discon_alias;
+		spin_lock(&alias->d_lock);
+		if (S_ISDIR(inode->i_mode) || !d_unhashed(alias)) {
+			if (IS_ROOT(alias) &&
+			    (alias->d_flags & DCACHE_DISCONNECTED)) {
+				__dget_dlock(alias);
+				spin_unlock(&alias->d_lock);
 				return alias;
 			}
 		}
+		spin_unlock(&alias->d_lock);
+		goto again;
 	}
-	if (discon_alias)
-		__dget_locked(discon_alias);
-	return discon_alias;
+	return NULL;
 }
 
-struct dentry * d_find_alias(struct inode *inode)
+struct dentry *d_find_alias(struct inode *inode)
 {
 	struct dentry *de = NULL;
 
 	if (!list_empty(&inode->i_dentry)) {
-		spin_lock(&dcache_lock);
+		spin_lock(&inode->i_lock);
 		de = __d_find_alias(inode, 0);
-		spin_unlock(&dcache_lock);
+		spin_unlock(&inode->i_lock);
 	}
 	return de;
 }
@@ -404,54 +634,61 @@ void d_prune_aliases(struct inode *inode)
 {
 	struct dentry *dentry;
 restart:
-	spin_lock(&dcache_lock);
+	spin_lock(&inode->i_lock);
 	list_for_each_entry(dentry, &inode->i_dentry, d_alias) {
 		spin_lock(&dentry->d_lock);
-		if (!atomic_read(&dentry->d_count)) {
-			__dget_locked(dentry);
+		if (!dentry->d_count) {
+			__dget_dlock(dentry);
 			__d_drop(dentry);
 			spin_unlock(&dentry->d_lock);
-			spin_unlock(&dcache_lock);
+			spin_unlock(&inode->i_lock);
 			dput(dentry);
 			goto restart;
 		}
 		spin_unlock(&dentry->d_lock);
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&inode->i_lock);
 }
 EXPORT_SYMBOL(d_prune_aliases);
 
 /*
- * Throw away a dentry - free the inode, dput the parent.  This requires that
- * the LRU list has already been removed.
+ * Try to throw away a dentry - free the inode, dput the parent.
+ * Requires dentry->d_lock is held, and dentry->d_count == 0.
+ * Releases dentry->d_lock.
  *
- * Try to prune ancestors as well.  This is necessary to prevent
- * quadratic behavior of shrink_dcache_parent(), but is also expected
- * to be beneficial in reducing dentry cache fragmentation.
+ * This may fail if locks cannot be acquired no problem, just try again.
  */
-static void prune_one_dentry(struct dentry * dentry)
+static void try_prune_one_dentry(struct dentry *dentry)
 	__releases(dentry->d_lock)
-	__releases(dcache_lock)
-	__acquires(dcache_lock)
 {
-	__d_drop(dentry);
-	dentry = d_kill(dentry);
+	struct dentry *parent;
 
+	parent = dentry_kill(dentry, 0);
 	/*
-	 * Prune ancestors.  Locking is simpler than in dput(),
-	 * because dcache_lock needs to be taken anyway.
+	 * If dentry_kill returns NULL, we have nothing more to do.
+	 * if it returns the same dentry, trylocks failed. In either
+	 * case, just loop again.
+	 *
+	 * Otherwise, we need to prune ancestors too. This is necessary
+	 * to prevent quadratic behavior of shrink_dcache_parent(), but
+	 * is also expected to be beneficial in reducing dentry cache
+	 * fragmentation.
 	 */
-	spin_lock(&dcache_lock);
+	if (!parent)
+		return;
+	if (parent == dentry)
+		return;
+
+	/* Prune ancestors. */
+	dentry = parent;
 	while (dentry) {
-		if (!atomic_dec_and_lock(&dentry->d_count, &dentry->d_lock))
+		spin_lock(&dentry->d_lock);
+		if (dentry->d_count > 1) {
+			dentry->d_count--;
+			spin_unlock(&dentry->d_lock);
 			return;
-
-		if (dentry->d_op && dentry->d_op->d_delete)
-			dentry->d_op->d_delete(dentry);
-		dentry_lru_del(dentry);
-		__d_drop(dentry);
-		dentry = d_kill(dentry);
-		spin_lock(&dcache_lock);
+		}
+		dentry = dentry_kill(dentry, 1);
 	}
 }
 
@@ -459,24 +696,35 @@ static void shrink_dentry_list(struct list_head *list)
 {
 	struct dentry *dentry;
 
-	while (!list_empty(list)) {
-		dentry = list_entry(list->prev, struct dentry, d_lru);
-		dentry_lru_del(dentry);
+	rcu_read_lock();
+	for (;;) {
+		dentry = list_entry_rcu(list->prev, struct dentry, d_lru);
+		if (&dentry->d_lru == list)
+			break; /* empty */
+		spin_lock(&dentry->d_lock);
+		if (dentry != list_entry(list->prev, struct dentry, d_lru)) {
+			spin_unlock(&dentry->d_lock);
+			continue;
+		}
 
 		/*
 		 * We found an inuse dentry which was not removed from
 		 * the LRU because of laziness during lookup.  Do not free
 		 * it - just keep it off the LRU list.
 		 */
-		spin_lock(&dentry->d_lock);
-		if (atomic_read(&dentry->d_count)) {
+		if (dentry->d_count) {
+			dentry_lru_del(dentry);
 			spin_unlock(&dentry->d_lock);
 			continue;
 		}
-		prune_one_dentry(dentry);
-		/* dentry->d_lock was dropped in prune_one_dentry() */
-		cond_resched_lock(&dcache_lock);
+
+		rcu_read_unlock();
+
+		try_prune_one_dentry(dentry);
+
+		rcu_read_lock();
 	}
+	rcu_read_unlock();
 }
 
 /**
@@ -495,42 +743,44 @@ static void __shrink_dcache_sb(struct super_block *sb, int *count, int flags)
 	LIST_HEAD(tmp);
 	int cnt = *count;
 
-	spin_lock(&dcache_lock);
+relock:
+	spin_lock(&dcache_lru_lock);
 	while (!list_empty(&sb->s_dentry_lru)) {
 		dentry = list_entry(sb->s_dentry_lru.prev,
 				struct dentry, d_lru);
 		BUG_ON(dentry->d_sb != sb);
 
+		if (!spin_trylock(&dentry->d_lock)) {
+			spin_unlock(&dcache_lru_lock);
+			cpu_relax();
+			goto relock;
+		}
+
 		/*
 		 * If we are honouring the DCACHE_REFERENCED flag and the
 		 * dentry has this flag set, don't free it.  Clear the flag
 		 * and put it back on the LRU.
 		 */
-		if (flags & DCACHE_REFERENCED) {
-			spin_lock(&dentry->d_lock);
-			if (dentry->d_flags & DCACHE_REFERENCED) {
-				dentry->d_flags &= ~DCACHE_REFERENCED;
-				list_move(&dentry->d_lru, &referenced);
-				spin_unlock(&dentry->d_lock);
-				cond_resched_lock(&dcache_lock);
-				continue;
-			}
+		if (flags & DCACHE_REFERENCED &&
+				dentry->d_flags & DCACHE_REFERENCED) {
+			dentry->d_flags &= ~DCACHE_REFERENCED;
+			list_move(&dentry->d_lru, &referenced);
 			spin_unlock(&dentry->d_lock);
+		} else {
+			list_move_tail(&dentry->d_lru, &tmp);
+			spin_unlock(&dentry->d_lock);
+			if (!--cnt)
+				break;
 		}
-
-		list_move_tail(&dentry->d_lru, &tmp);
-		if (!--cnt)
-			break;
-		cond_resched_lock(&dcache_lock);
+		cond_resched_lock(&dcache_lru_lock);
 	}
-
-	*count = cnt;
-	shrink_dentry_list(&tmp);
-
 	if (!list_empty(&referenced))
 		list_splice(&referenced, &sb->s_dentry_lru);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dcache_lru_lock);
 
+	shrink_dentry_list(&tmp);
+
+	*count = cnt;
 }
 
 /**
@@ -546,13 +796,12 @@ static void prune_dcache(int count)
 {
 	struct super_block *sb, *p = NULL;
 	int w_count;
-	int unused = percpu_counter_sum_positive(&nr_dentry_unused);
+	int unused = dentry_stat.nr_unused;
 	int prune_ratio;
 	int pruned;
 
 	if (unused == 0 || count == 0)
 		return;
-	spin_lock(&dcache_lock);
 	if (count >= unused)
 		prune_ratio = 1;
 	else
@@ -589,11 +838,9 @@ static void prune_dcache(int count)
 		if (down_read_trylock(&sb->s_umount)) {
 			if ((sb->s_root != NULL) &&
 			    (!list_empty(&sb->s_dentry_lru))) {
-				spin_unlock(&dcache_lock);
 				__shrink_dcache_sb(sb, &w_count,
 						DCACHE_REFERENCED);
 				pruned -= w_count;
-				spin_lock(&dcache_lock);
 			}
 			up_read(&sb->s_umount);
 		}
@@ -609,7 +856,6 @@ static void prune_dcache(int count)
 	if (p)
 		__put_super(p);
 	spin_unlock(&sb_lock);
-	spin_unlock(&dcache_lock);
 }
 
 /**
@@ -623,12 +869,14 @@ void shrink_dcache_sb(struct super_block *sb)
 {
 	LIST_HEAD(tmp);
 
-	spin_lock(&dcache_lock);
+	spin_lock(&dcache_lru_lock);
 	while (!list_empty(&sb->s_dentry_lru)) {
 		list_splice_init(&sb->s_dentry_lru, &tmp);
+		spin_unlock(&dcache_lru_lock);
 		shrink_dentry_list(&tmp);
+		spin_lock(&dcache_lru_lock);
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dcache_lru_lock);
 }
 EXPORT_SYMBOL(shrink_dcache_sb);
 
@@ -645,10 +893,10 @@ static void shrink_dcache_for_umount_subtree(struct dentry *dentry)
 	BUG_ON(!IS_ROOT(dentry));
 
 	/* detach this root from the system */
-	spin_lock(&dcache_lock);
+	spin_lock(&dentry->d_lock);
 	dentry_lru_del(dentry);
 	__d_drop(dentry);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dentry->d_lock);
 
 	for (;;) {
 		/* descend to the first leaf in the current subtree */
@@ -657,14 +905,16 @@ static void shrink_dcache_for_umount_subtree(struct dentry *dentry)
 
 			/* this is a branch with children - detach all of them
 			 * from the system in one go */
-			spin_lock(&dcache_lock);
+			spin_lock(&dentry->d_lock);
 			list_for_each_entry(loop, &dentry->d_subdirs,
 					    d_u.d_child) {
+				spin_lock_nested(&loop->d_lock,
+						DENTRY_D_LOCK_NESTED);
 				dentry_lru_del(loop);
 				__d_drop(loop);
-				cond_resched_lock(&dcache_lock);
+				spin_unlock(&loop->d_lock);
 			}
-			spin_unlock(&dcache_lock);
+			spin_unlock(&dentry->d_lock);
 
 			/* move to the first child */
 			dentry = list_entry(dentry->d_subdirs.next,
@@ -676,7 +926,7 @@ static void shrink_dcache_for_umount_subtree(struct dentry *dentry)
 		do {
 			struct inode *inode;
 
-			if (atomic_read(&dentry->d_count) != 0) {
+			if (dentry->d_count != 0) {
 				printk(KERN_ERR
 				       "BUG: Dentry %p{i=%lx,n=%s}"
 				       " still in use (%d)"
@@ -685,20 +935,23 @@ static void shrink_dcache_for_umount_subtree(struct dentry *dentry)
 				       dentry->d_inode ?
 				       dentry->d_inode->i_ino : 0UL,
 				       dentry->d_name.name,
-				       atomic_read(&dentry->d_count),
+				       dentry->d_count,
 				       dentry->d_sb->s_type->name,
 				       dentry->d_sb->s_id);
 				BUG();
 			}
 
-			if (IS_ROOT(dentry))
+			if (IS_ROOT(dentry)) {
 				parent = NULL;
-			else {
+				list_del(&dentry->d_u.d_child);
+			} else {
 				parent = dentry->d_parent;
-				atomic_dec(&parent->d_count);
+				spin_lock(&parent->d_lock);
+				parent->d_count--;
+				list_del(&dentry->d_u.d_child);
+				spin_unlock(&parent->d_lock);
 			}
 
-			list_del(&dentry->d_u.d_child);
 			detached++;
 
 			inode = dentry->d_inode;
@@ -728,8 +981,7 @@ static void shrink_dcache_for_umount_subtree(struct dentry *dentry)
 
 /*
  * destroy the dentries attached to a superblock on unmounting
- * - we don't need to use dentry->d_lock, and only need dcache_lock when
- *   removing the dentry from the system lists and hashes because:
+ * - we don't need to use dentry->d_lock because:
  *   - the superblock is detached from all mountings and open files, so the
  *     dentry trees will not be rearranged by the VFS
  *   - s_umount is write-locked, so the memory pressure shrinker will ignore
@@ -746,11 +998,13 @@ void shrink_dcache_for_umount(struct super_block *sb)
 
 	dentry = sb->s_root;
 	sb->s_root = NULL;
-	atomic_dec(&dentry->d_count);
+	spin_lock(&dentry->d_lock);
+	dentry->d_count--;
+	spin_unlock(&dentry->d_lock);
 	shrink_dcache_for_umount_subtree(dentry);
 
-	while (!hlist_empty(&sb->s_anon)) {
-		dentry = hlist_entry(sb->s_anon.first, struct dentry, d_hash);
+	while (!hlist_bl_empty(&sb->s_anon)) {
+		dentry = hlist_bl_entry(hlist_bl_first(&sb->s_anon), struct dentry, d_hash);
 		shrink_dcache_for_umount_subtree(dentry);
 	}
 }
@@ -768,15 +1022,20 @@ void shrink_dcache_for_umount(struct super_block *sb)
  * Return true if the parent or its subdirectories contain
  * a mount point
  */
- 
 int have_submounts(struct dentry *parent)
 {
-	struct dentry *this_parent = parent;
+	struct dentry *this_parent;
 	struct list_head *next;
+	unsigned seq;
+	int locked = 0;
+
+	seq = read_seqbegin(&rename_lock);
+again:
+	this_parent = parent;
 
-	spin_lock(&dcache_lock);
 	if (d_mountpoint(parent))
 		goto positive;
+	spin_lock(&this_parent->d_lock);
 repeat:
 	next = this_parent->d_subdirs.next;
 resume:
@@ -784,27 +1043,65 @@ resume:
 		struct list_head *tmp = next;
 		struct dentry *dentry = list_entry(tmp, struct dentry, d_u.d_child);
 		next = tmp->next;
+
+		spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
 		/* Have we found a mount point ? */
-		if (d_mountpoint(dentry))
+		if (d_mountpoint(dentry)) {
+			spin_unlock(&dentry->d_lock);
+			spin_unlock(&this_parent->d_lock);
 			goto positive;
+		}
 		if (!list_empty(&dentry->d_subdirs)) {
+			spin_unlock(&this_parent->d_lock);
+			spin_release(&dentry->d_lock.dep_map, 1, _RET_IP_);
 			this_parent = dentry;
+			spin_acquire(&this_parent->d_lock.dep_map, 0, 1, _RET_IP_);
 			goto repeat;
 		}
+		spin_unlock(&dentry->d_lock);
 	}
 	/*
 	 * All done at this level ... ascend and resume the search.
 	 */
 	if (this_parent != parent) {
-		next = this_parent->d_u.d_child.next;
-		this_parent = this_parent->d_parent;
+		struct dentry *tmp;
+		struct dentry *child;
+
+		tmp = this_parent->d_parent;
+		rcu_read_lock();
+		spin_unlock(&this_parent->d_lock);
+		child = this_parent;
+		this_parent = tmp;
+		spin_lock(&this_parent->d_lock);
+		/* might go back up the wrong parent if we have had a rename
+		 * or deletion */
+		if (this_parent != child->d_parent ||
+			 (!locked && read_seqretry(&rename_lock, seq))) {
+			spin_unlock(&this_parent->d_lock);
+			rcu_read_unlock();
+			goto rename_retry;
+		}
+		rcu_read_unlock();
+		next = child->d_u.d_child.next;
 		goto resume;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&this_parent->d_lock);
+	if (!locked && read_seqretry(&rename_lock, seq))
+		goto rename_retry;
+	if (locked)
+		write_sequnlock(&rename_lock);
 	return 0; /* No mount points found in tree */
 positive:
-	spin_unlock(&dcache_lock);
+	if (!locked && read_seqretry(&rename_lock, seq))
+		goto rename_retry;
+	if (locked)
+		write_sequnlock(&rename_lock);
 	return 1;
+
+rename_retry:
+	locked = 1;
+	write_seqlock(&rename_lock);
+	goto again;
 }
 EXPORT_SYMBOL(have_submounts);
 
@@ -824,11 +1121,16 @@ EXPORT_SYMBOL(have_submounts);
  */
 static int select_parent(struct dentry * parent)
 {
-	struct dentry *this_parent = parent;
+	struct dentry *this_parent;
 	struct list_head *next;
+	unsigned seq;
 	int found = 0;
+	int locked = 0;
 
-	spin_lock(&dcache_lock);
+	seq = read_seqbegin(&rename_lock);
+again:
+	this_parent = parent;
+	spin_lock(&this_parent->d_lock);
 repeat:
 	next = this_parent->d_subdirs.next;
 resume:
@@ -837,11 +1139,13 @@ resume:
 		struct dentry *dentry = list_entry(tmp, struct dentry, d_u.d_child);
 		next = tmp->next;
 
+		spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
+
 		/* 
 		 * move only zero ref count dentries to the end 
 		 * of the unused list for prune_dcache
 		 */
-		if (!atomic_read(&dentry->d_count)) {
+		if (!dentry->d_count) {
 			dentry_lru_move_tail(dentry);
 			found++;
 		} else {
@@ -853,28 +1157,63 @@ resume:
 		 * ensures forward progress). We'll be coming back to find
 		 * the rest.
 		 */
-		if (found && need_resched())
+		if (found && need_resched()) {
+			spin_unlock(&dentry->d_lock);
 			goto out;
+		}
 
 		/*
 		 * Descend a level if the d_subdirs list is non-empty.
 		 */
 		if (!list_empty(&dentry->d_subdirs)) {
+			spin_unlock(&this_parent->d_lock);
+			spin_release(&dentry->d_lock.dep_map, 1, _RET_IP_);
 			this_parent = dentry;
+			spin_acquire(&this_parent->d_lock.dep_map, 0, 1, _RET_IP_);
 			goto repeat;
 		}
+
+		spin_unlock(&dentry->d_lock);
 	}
 	/*
 	 * All done at this level ... ascend and resume the search.
 	 */
 	if (this_parent != parent) {
-		next = this_parent->d_u.d_child.next;
-		this_parent = this_parent->d_parent;
+		struct dentry *tmp;
+		struct dentry *child;
+
+		tmp = this_parent->d_parent;
+		rcu_read_lock();
+		spin_unlock(&this_parent->d_lock);
+		child = this_parent;
+		this_parent = tmp;
+		spin_lock(&this_parent->d_lock);
+		/* might go back up the wrong parent if we have had a rename
+		 * or deletion */
+		if (this_parent != child->d_parent ||
+			(!locked && read_seqretry(&rename_lock, seq))) {
+			spin_unlock(&this_parent->d_lock);
+			rcu_read_unlock();
+			goto rename_retry;
+		}
+		rcu_read_unlock();
+		next = child->d_u.d_child.next;
 		goto resume;
 	}
 out:
-	spin_unlock(&dcache_lock);
+	spin_unlock(&this_parent->d_lock);
+	if (!locked && read_seqretry(&rename_lock, seq))
+		goto rename_retry;
+	if (locked)
+		write_sequnlock(&rename_lock);
 	return found;
+
+rename_retry:
+	if (found)
+		return found;
+	locked = 1;
+	write_seqlock(&rename_lock);
+	goto again;
 }
 
 /**
@@ -908,16 +1247,13 @@ EXPORT_SYMBOL(shrink_dcache_parent);
  */
 static int shrink_dcache_memory(struct shrinker *shrink, int nr, gfp_t gfp_mask)
 {
-	int nr_unused;
-
 	if (nr) {
 		if (!(gfp_mask & __GFP_FS))
 			return -1;
 		prune_dcache(nr);
 	}
 
-	nr_unused = percpu_counter_sum_positive(&nr_dentry_unused);
-	return (nr_unused / 100) * sysctl_vfs_cache_pressure;
+	return (dentry_stat.nr_unused / 100) * sysctl_vfs_cache_pressure;
 }
 
 static struct shrinker dcache_shrinker = {
@@ -960,38 +1296,52 @@ struct dentry *d_alloc(struct dentry * parent, const struct qstr *name)
 	memcpy(dname, name->name, name->len);
 	dname[name->len] = 0;
 
-	atomic_set(&dentry->d_count, 1);
+	dentry->d_count = 1;
 	dentry->d_flags = DCACHE_UNHASHED;
 	spin_lock_init(&dentry->d_lock);
+	seqcount_init(&dentry->d_seq);
 	dentry->d_inode = NULL;
 	dentry->d_parent = NULL;
 	dentry->d_sb = NULL;
 	dentry->d_op = NULL;
 	dentry->d_fsdata = NULL;
-	dentry->d_mounted = 0;
-	INIT_HLIST_NODE(&dentry->d_hash);
+	INIT_HLIST_BL_NODE(&dentry->d_hash);
 	INIT_LIST_HEAD(&dentry->d_lru);
 	INIT_LIST_HEAD(&dentry->d_subdirs);
 	INIT_LIST_HEAD(&dentry->d_alias);
+	INIT_LIST_HEAD(&dentry->d_u.d_child);
 
 	if (parent) {
-		dentry->d_parent = dget(parent);
+		spin_lock(&parent->d_lock);
+		/*
+		 * don't need child lock because it is not subject
+		 * to concurrency here
+		 */
+		__dget_dlock(parent);
+		dentry->d_parent = parent;
 		dentry->d_sb = parent->d_sb;
-	} else {
-		INIT_LIST_HEAD(&dentry->d_u.d_child);
-	}
-
-	spin_lock(&dcache_lock);
-	if (parent)
 		list_add(&dentry->d_u.d_child, &parent->d_subdirs);
-	spin_unlock(&dcache_lock);
+		spin_unlock(&parent->d_lock);
+	}
 
-	percpu_counter_inc(&nr_dentry);
+	this_cpu_inc(nr_dentry);
 
 	return dentry;
 }
 EXPORT_SYMBOL(d_alloc);
 
+struct dentry *d_alloc_pseudo(struct super_block *sb, const struct qstr *name)
+{
+	struct dentry *dentry = d_alloc(NULL, name);
+	if (dentry) {
+		dentry->d_sb = sb;
+		dentry->d_parent = dentry;
+		dentry->d_flags |= DCACHE_DISCONNECTED;
+	}
+	return dentry;
+}
+EXPORT_SYMBOL(d_alloc_pseudo);
+
 struct dentry *d_alloc_name(struct dentry *parent, const char *name)
 {
 	struct qstr q;
@@ -1003,12 +1353,36 @@ struct dentry *d_alloc_name(struct dentry *parent, const char *name)
 }
 EXPORT_SYMBOL(d_alloc_name);
 
-/* the caller must hold dcache_lock */
+void d_set_d_op(struct dentry *dentry, const struct dentry_operations *op)
+{
+	BUG_ON(dentry->d_op);
+	BUG_ON(dentry->d_flags & (DCACHE_OP_HASH	|
+				DCACHE_OP_COMPARE	|
+				DCACHE_OP_REVALIDATE	|
+				DCACHE_OP_DELETE ));
+	dentry->d_op = op;
+	if (!op)
+		return;
+	if (op->d_hash)
+		dentry->d_flags |= DCACHE_OP_HASH;
+	if (op->d_compare)
+		dentry->d_flags |= DCACHE_OP_COMPARE;
+	if (op->d_revalidate)
+		dentry->d_flags |= DCACHE_OP_REVALIDATE;
+	if (op->d_delete)
+		dentry->d_flags |= DCACHE_OP_DELETE;
+
+}
+EXPORT_SYMBOL(d_set_d_op);
+
 static void __d_instantiate(struct dentry *dentry, struct inode *inode)
 {
+	spin_lock(&dentry->d_lock);
 	if (inode)
 		list_add(&dentry->d_alias, &inode->i_dentry);
 	dentry->d_inode = inode;
+	dentry_rcuwalk_barrier(dentry);
+	spin_unlock(&dentry->d_lock);
 	fsnotify_d_instantiate(dentry, inode);
 }
 
@@ -1030,9 +1404,11 @@ static void __d_instantiate(struct dentry *dentry, struct inode *inode)
 void d_instantiate(struct dentry *entry, struct inode * inode)
 {
 	BUG_ON(!list_empty(&entry->d_alias));
-	spin_lock(&dcache_lock);
+	if (inode)
+		spin_lock(&inode->i_lock);
 	__d_instantiate(entry, inode);
-	spin_unlock(&dcache_lock);
+	if (inode)
+		spin_unlock(&inode->i_lock);
 	security_d_instantiate(entry, inode);
 }
 EXPORT_SYMBOL(d_instantiate);
@@ -1069,15 +1445,18 @@ static struct dentry *__d_instantiate_unique(struct dentry *entry,
 	list_for_each_entry(alias, &inode->i_dentry, d_alias) {
 		struct qstr *qstr = &alias->d_name;
 
+		/*
+		 * Don't need alias->d_lock here, because aliases with
+		 * d_parent == entry->d_parent are not subject to name or
+		 * parent changes, because the parent inode i_mutex is held.
+		 */
 		if (qstr->hash != hash)
 			continue;
 		if (alias->d_parent != entry->d_parent)
 			continue;
-		if (qstr->len != len)
+		if (dentry_cmp(qstr->name, qstr->len, name, len))
 			continue;
-		if (memcmp(qstr->name, name, len))
-			continue;
-		dget_locked(alias);
+		__dget(alias);
 		return alias;
 	}
 
@@ -1091,9 +1470,11 @@ struct dentry *d_instantiate_unique(struct dentry *entry, struct inode *inode)
 
 	BUG_ON(!list_empty(&entry->d_alias));
 
-	spin_lock(&dcache_lock);
+	if (inode)
+		spin_lock(&inode->i_lock);
 	result = __d_instantiate_unique(entry, inode);
-	spin_unlock(&dcache_lock);
+	if (inode)
+		spin_unlock(&inode->i_lock);
 
 	if (!result) {
 		security_d_instantiate(entry, inode);
@@ -1134,14 +1515,6 @@ struct dentry * d_alloc_root(struct inode * root_inode)
 }
 EXPORT_SYMBOL(d_alloc_root);
 
-static inline struct hlist_head *d_hash(struct dentry *parent,
-					unsigned long hash)
-{
-	hash += ((unsigned long) parent ^ GOLDEN_RATIO_PRIME) / L1_CACHE_BYTES;
-	hash = hash ^ ((hash ^ GOLDEN_RATIO_PRIME) >> D_HASHBITS);
-	return dentry_hashtable + (hash & D_HASHMASK);
-}
-
 /**
  * d_obtain_alias - find or allocate a dentry for a given inode
  * @inode: inode to allocate the dentry for
@@ -1182,10 +1555,11 @@ struct dentry *d_obtain_alias(struct inode *inode)
 	}
 	tmp->d_parent = tmp; /* make sure dput doesn't croak */
 
-	spin_lock(&dcache_lock);
+
+	spin_lock(&inode->i_lock);
 	res = __d_find_alias(inode, 0);
 	if (res) {
-		spin_unlock(&dcache_lock);
+		spin_unlock(&inode->i_lock);
 		dput(tmp);
 		goto out_iput;
 	}
@@ -1195,12 +1569,14 @@ struct dentry *d_obtain_alias(struct inode *inode)
 	tmp->d_sb = inode->i_sb;
 	tmp->d_inode = inode;
 	tmp->d_flags |= DCACHE_DISCONNECTED;
-	tmp->d_flags &= ~DCACHE_UNHASHED;
 	list_add(&tmp->d_alias, &inode->i_dentry);
-	hlist_add_head(&tmp->d_hash, &inode->i_sb->s_anon);
+	bit_spin_lock(0, (unsigned long *)&tmp->d_sb->s_anon.first);
+	tmp->d_flags &= ~DCACHE_UNHASHED;
+	hlist_bl_add_head(&tmp->d_hash, &tmp->d_sb->s_anon);
+	__bit_spin_unlock(0, (unsigned long *)&tmp->d_sb->s_anon.first);
 	spin_unlock(&tmp->d_lock);
+	spin_unlock(&inode->i_lock);
 
-	spin_unlock(&dcache_lock);
 	return tmp;
 
  out_iput:
@@ -1230,18 +1606,18 @@ struct dentry *d_splice_alias(struct inode *inode, struct dentry *dentry)
 	struct dentry *new = NULL;
 
 	if (inode && S_ISDIR(inode->i_mode)) {
-		spin_lock(&dcache_lock);
+		spin_lock(&inode->i_lock);
 		new = __d_find_alias(inode, 1);
 		if (new) {
 			BUG_ON(!(new->d_flags & DCACHE_DISCONNECTED));
-			spin_unlock(&dcache_lock);
+			spin_unlock(&inode->i_lock);
 			security_d_instantiate(new, inode);
 			d_move(new, dentry);
 			iput(inode);
 		} else {
-			/* already taking dcache_lock, so d_add() by hand */
+			/* already taking inode->i_lock, so d_add() by hand */
 			__d_instantiate(dentry, inode);
-			spin_unlock(&dcache_lock);
+			spin_unlock(&inode->i_lock);
 			security_d_instantiate(dentry, inode);
 			d_rehash(dentry);
 		}
@@ -1314,10 +1690,10 @@ struct dentry *d_add_ci(struct dentry *dentry, struct inode *inode,
 	 * Negative dentry: instantiate it unless the inode is a directory and
 	 * already has a dentry.
 	 */
-	spin_lock(&dcache_lock);
+	spin_lock(&inode->i_lock);
 	if (!S_ISDIR(inode->i_mode) || list_empty(&inode->i_dentry)) {
 		__d_instantiate(found, inode);
-		spin_unlock(&dcache_lock);
+		spin_unlock(&inode->i_lock);
 		security_d_instantiate(found, inode);
 		return found;
 	}
@@ -1327,8 +1703,8 @@ struct dentry *d_add_ci(struct dentry *dentry, struct inode *inode,
 	 * reference to it, move it in place and use it.
 	 */
 	new = list_entry(inode->i_dentry.next, struct dentry, d_alias);
-	dget_locked(new);
-	spin_unlock(&dcache_lock);
+	__dget(new);
+	spin_unlock(&inode->i_lock);
 	security_d_instantiate(found, inode);
 	d_move(new, found);
 	iput(inode);
@@ -1342,6 +1718,112 @@ err_out:
 EXPORT_SYMBOL(d_add_ci);
 
 /**
+ * __d_lookup_rcu - search for a dentry (racy, store-free)
+ * @parent: parent dentry
+ * @name: qstr of name we wish to find
+ * @seq: returns d_seq value at the point where the dentry was found
+ * @inode: returns dentry->d_inode when the inode was found valid.
+ * Returns: dentry, or NULL
+ *
+ * __d_lookup_rcu is the dcache lookup function for rcu-walk name
+ * resolution (store-free path walking) design described in
+ * Documentation/filesystems/path-lookup.txt.
+ *
+ * This is not to be used outside core vfs.
+ *
+ * __d_lookup_rcu must only be used in rcu-walk mode, ie. with vfsmount lock
+ * held, and rcu_read_lock held. The returned dentry must not be stored into
+ * without taking d_lock and checking d_seq sequence count against @seq
+ * returned here.
+ *
+ * A refcount may be taken on the found dentry with the __d_rcu_to_refcount
+ * function.
+ *
+ * Alternatively, __d_lookup_rcu may be called again to look up the child of
+ * the returned dentry, so long as its parent's seqlock is checked after the
+ * child is looked up. Thus, an interlocking stepping of sequence lock checks
+ * is formed, giving integrity down the path walk.
+ */
+struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name,
+				unsigned *seq, struct inode **inode)
+{
+	unsigned int len = name->len;
+	unsigned int hash = name->hash;
+	const unsigned char *str = name->name;
+	struct dcache_hash_bucket *b = d_hash(parent, hash);
+	struct hlist_bl_node *node;
+	struct dentry *dentry;
+
+	/*
+	 * Note: There is significant duplication with __d_lookup_rcu which is
+	 * required to prevent single threaded performance regressions
+	 * especially on architectures where smp_rmb (in seqcounts) are costly.
+	 * Keep the two functions in sync.
+	 */
+
+	/*
+	 * The hash list is protected using RCU.
+	 *
+	 * Carefully use d_seq when comparing a candidate dentry, to avoid
+	 * races with d_move().
+	 *
+	 * It is possible that concurrent renames can mess up our list
+	 * walk here and result in missing our dentry, resulting in the
+	 * false-negative result. d_lookup() protects against concurrent
+	 * renames using rename_lock seqlock.
+	 *
+	 * See Documentation/vfs/dcache-locking.txt for more details.
+	 */
+	hlist_bl_for_each_entry_rcu(dentry, node, &b->head, d_hash) {
+		struct inode *i;
+		const char *tname;
+		int tlen;
+
+		if (dentry->d_name.hash != hash)
+			continue;
+
+seqretry:
+		*seq = read_seqcount_begin(&dentry->d_seq);
+		if (dentry->d_parent != parent)
+			continue;
+		if (d_unhashed(dentry))
+			continue;
+		tlen = dentry->d_name.len;
+		tname = dentry->d_name.name;
+		i = dentry->d_inode;
+		prefetch(tname);
+		if (i)
+			prefetch(i);
+		/*
+		 * This seqcount check is required to ensure name and
+		 * len are loaded atomically, so as not to walk off the
+		 * edge of memory when walking. If we could load this
+		 * atomically some other way, we could drop this check.
+		 */
+		if (read_seqcount_retry(&dentry->d_seq, *seq))
+			goto seqretry;
+		if (parent->d_flags & DCACHE_OP_COMPARE) {
+			if (parent->d_op->d_compare(parent, *inode,
+						dentry, i,
+						tlen, tname, name))
+				continue;
+		} else {
+			if (dentry_cmp(tname, tlen, str, len))
+				continue;
+		}
+		/*
+		 * No extra seqcount check is required after the name
+		 * compare. The caller must perform a seqcount check in
+		 * order to do anything useful with the returned dentry
+		 * anyway.
+		 */
+		*inode = i;
+		return dentry;
+	}
+	return NULL;
+}
+
+/**
  * d_lookup - search for a dentry
  * @parent: parent dentry
  * @name: qstr of name we wish to find
@@ -1352,10 +1834,10 @@ EXPORT_SYMBOL(d_add_ci);
  * dentry is returned. The caller must use dput to free the entry when it has
  * finished using it. %NULL is returned if the dentry does not exist.
  */
-struct dentry * d_lookup(struct dentry * parent, struct qstr * name)
+struct dentry *d_lookup(struct dentry *parent, struct qstr *name)
 {
-	struct dentry * dentry = NULL;
-	unsigned long seq;
+	struct dentry *dentry;
+	unsigned seq;
 
         do {
                 seq = read_seqbegin(&rename_lock);
@@ -1367,7 +1849,7 @@ struct dentry * d_lookup(struct dentry * parent, struct qstr * name)
 }
 EXPORT_SYMBOL(d_lookup);
 
-/*
+/**
  * __d_lookup - search for a dentry (racy)
  * @parent: parent dentry
  * @name: qstr of name we wish to find
@@ -1382,17 +1864,24 @@ EXPORT_SYMBOL(d_lookup);
  *
  * __d_lookup callers must be commented.
  */
-struct dentry * __d_lookup(struct dentry * parent, struct qstr * name)
+struct dentry *__d_lookup(struct dentry *parent, struct qstr *name)
 {
 	unsigned int len = name->len;
 	unsigned int hash = name->hash;
 	const unsigned char *str = name->name;
-	struct hlist_head *head = d_hash(parent,hash);
+	struct dcache_hash_bucket *b = d_hash(parent, hash);
+	struct hlist_bl_node *node;
 	struct dentry *found = NULL;
-	struct hlist_node *node;
 	struct dentry *dentry;
 
 	/*
+	 * Note: There is significant duplication with __d_lookup_rcu which is
+	 * required to prevent single threaded performance regressions
+	 * especially on architectures where smp_rmb (in seqcounts) are costly.
+	 * Keep the two functions in sync.
+	 */
+
+	/*
 	 * The hash list is protected using RCU.
 	 *
 	 * Take d_lock when comparing a candidate dentry, to avoid races
@@ -1407,25 +1896,16 @@ struct dentry * __d_lookup(struct dentry * parent, struct qstr * name)
 	 */
 	rcu_read_lock();
 	
-	hlist_for_each_entry_rcu(dentry, node, head, d_hash) {
-		struct qstr *qstr;
+	hlist_bl_for_each_entry_rcu(dentry, node, &b->head, d_hash) {
+		const char *tname;
+		int tlen;
 
 		if (dentry->d_name.hash != hash)
 			continue;
-		if (dentry->d_parent != parent)
-			continue;
 
 		spin_lock(&dentry->d_lock);
-
-		/*
-		 * Recheck the dentry after taking the lock - d_move may have
-		 * changed things. Don't bother checking the hash because
-		 * we're about to compare the whole name anyway.
-		 */
 		if (dentry->d_parent != parent)
 			goto next;
-
-		/* non-existing due to RCU? */
 		if (d_unhashed(dentry))
 			goto next;
 
@@ -1433,18 +1913,19 @@ struct dentry * __d_lookup(struct dentry * parent, struct qstr * name)
 		 * It is safe to compare names since d_move() cannot
 		 * change the qstr (protected by d_lock).
 		 */
-		qstr = &dentry->d_name;
-		if (parent->d_op && parent->d_op->d_compare) {
-			if (parent->d_op->d_compare(parent, qstr, name))
+		tlen = dentry->d_name.len;
+		tname = dentry->d_name.name;
+		if (parent->d_flags & DCACHE_OP_COMPARE) {
+			if (parent->d_op->d_compare(parent, parent->d_inode,
+						dentry, dentry->d_inode,
+						tlen, tname, name))
 				goto next;
 		} else {
-			if (qstr->len != len)
-				goto next;
-			if (memcmp(qstr->name, str, len))
+			if (dentry_cmp(tname, tlen, str, len))
 				goto next;
 		}
 
-		atomic_inc(&dentry->d_count);
+		dentry->d_count++;
 		found = dentry;
 		spin_unlock(&dentry->d_lock);
 		break;
@@ -1473,8 +1954,8 @@ struct dentry *d_hash_and_lookup(struct dentry *dir, struct qstr *name)
 	 * routine may choose to leave the hash value unchanged.
 	 */
 	name->hash = full_name_hash(name->name, name->len);
-	if (dir->d_op && dir->d_op->d_hash) {
-		if (dir->d_op->d_hash(dir, name) < 0)
+	if (dir->d_flags & DCACHE_OP_HASH) {
+		if (dir->d_op->d_hash(dir, dir->d_inode, name) < 0)
 			goto out;
 	}
 	dentry = d_lookup(dir, name);
@@ -1483,34 +1964,32 @@ out:
 }
 
 /**
- * d_validate - verify dentry provided from insecure source
+ * d_validate - verify dentry provided from insecure source (deprecated)
  * @dentry: The dentry alleged to be valid child of @dparent
  * @dparent: The parent dentry (known to be valid)
  *
  * An insecure source has sent us a dentry, here we verify it and dget() it.
  * This is used by ncpfs in its readdir implementation.
  * Zero is returned in the dentry is invalid.
+ *
+ * This function is slow for big directories, and deprecated, do not use it.
  */
-int d_validate(struct dentry *dentry, struct dentry *parent)
+int d_validate(struct dentry *dentry, struct dentry *dparent)
 {
-	struct hlist_head *head = d_hash(parent, dentry->d_name.hash);
-	struct hlist_node *node;
-	struct dentry *d;
-
-	/* Check whether the ptr might be valid at all.. */
-	if (!kmem_ptr_validate(dentry_cache, dentry))
-		return 0;
-	if (dentry->d_parent != parent)
-		return 0;
+	struct dentry *child;
 
-	rcu_read_lock();
-	hlist_for_each_entry_rcu(d, node, head, d_hash) {
-		if (d == dentry) {
-			dget(dentry);
+	spin_lock(&dparent->d_lock);
+	list_for_each_entry(child, &dparent->d_subdirs, d_u.d_child) {
+		if (dentry == child) {
+			spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
+			__dget_dlock(dentry);
+			spin_unlock(&dentry->d_lock);
+			spin_unlock(&dparent->d_lock);
 			return 1;
 		}
 	}
-	rcu_read_unlock();
+	spin_unlock(&dparent->d_lock);
+
 	return 0;
 }
 EXPORT_SYMBOL(d_validate);
@@ -1538,16 +2017,23 @@ EXPORT_SYMBOL(d_validate);
  
 void d_delete(struct dentry * dentry)
 {
+	struct inode *inode;
 	int isdir = 0;
 	/*
 	 * Are we the only user?
 	 */
-	spin_lock(&dcache_lock);
+again:
 	spin_lock(&dentry->d_lock);
-	isdir = S_ISDIR(dentry->d_inode->i_mode);
-	if (atomic_read(&dentry->d_count) == 1) {
+	inode = dentry->d_inode;
+	isdir = S_ISDIR(inode->i_mode);
+	if (dentry->d_count == 1) {
+		if (inode && !spin_trylock(&inode->i_lock)) {
+			spin_unlock(&dentry->d_lock);
+			cpu_relax();
+			goto again;
+		}
 		dentry->d_flags &= ~DCACHE_CANT_MOUNT;
-		dentry_iput(dentry);
+		dentry_unlink_inode(dentry);
 		fsnotify_nameremove(dentry, isdir);
 		return;
 	}
@@ -1556,17 +2042,18 @@ void d_delete(struct dentry * dentry)
 		__d_drop(dentry);
 
 	spin_unlock(&dentry->d_lock);
-	spin_unlock(&dcache_lock);
 
 	fsnotify_nameremove(dentry, isdir);
 }
 EXPORT_SYMBOL(d_delete);
 
-static void __d_rehash(struct dentry * entry, struct hlist_head *list)
+static void __d_rehash(struct dentry * entry, struct dcache_hash_bucket *b)
 {
-
+	BUG_ON(!d_unhashed(entry));
+	spin_lock_bucket(b);
  	entry->d_flags &= ~DCACHE_UNHASHED;
- 	hlist_add_head_rcu(&entry->d_hash, list);
+	hlist_bl_add_head_rcu(&entry->d_hash, &b->head);
+	spin_unlock_bucket(b);
 }
 
 static void _d_rehash(struct dentry * entry)
@@ -1583,25 +2070,39 @@ static void _d_rehash(struct dentry * entry)
  
 void d_rehash(struct dentry * entry)
 {
-	spin_lock(&dcache_lock);
 	spin_lock(&entry->d_lock);
 	_d_rehash(entry);
 	spin_unlock(&entry->d_lock);
-	spin_unlock(&dcache_lock);
 }
 EXPORT_SYMBOL(d_rehash);
 
-/*
- * When switching names, the actual string doesn't strictly have to
- * be preserved in the target - because we're dropping the target
- * anyway. As such, we can just do a simple memcpy() to copy over
- * the new name before we switch.
+/**
+ * dentry_update_name_case - update case insensitive dentry with a new name
+ * @dentry: dentry to be updated
+ * @name: new name
  *
- * Note that we have to be a lot more careful about getting the hash
- * switched - we have to switch the hash value properly even if it
- * then no longer matches the actual (corrupted) string of the target.
- * The hash value has to match the hash queue that the dentry is on..
+ * Update a case insensitive dentry with new case of name.
+ *
+ * dentry must have been returned by d_lookup with name @name. Old and new
+ * name lengths must match (ie. no d_compare which allows mismatched name
+ * lengths).
+ *
+ * Parent inode i_mutex must be held over d_lookup and into this call (to
+ * keep renames and concurrent inserts, and readdir(2) away).
  */
+void dentry_update_name_case(struct dentry *dentry, struct qstr *name)
+{
+	BUG_ON(!mutex_is_locked(&dentry->d_inode->i_mutex));
+	BUG_ON(dentry->d_name.len != name->len); /* d_lookup gives this */
+
+	spin_lock(&dentry->d_lock);
+	write_seqcount_begin(&dentry->d_seq);
+	memcpy((unsigned char *)dentry->d_name.name, name->name, name->len);
+	write_seqcount_end(&dentry->d_seq);
+	spin_unlock(&dentry->d_lock);
+}
+EXPORT_SYMBOL(dentry_update_name_case);
+
 static void switch_names(struct dentry *dentry, struct dentry *target)
 {
 	if (dname_external(target)) {
@@ -1643,54 +2144,84 @@ static void switch_names(struct dentry *dentry, struct dentry *target)
 	swap(dentry->d_name.len, target->d_name.len);
 }
 
+static void dentry_lock_for_move(struct dentry *dentry, struct dentry *target)
+{
+	/*
+	 * XXXX: do we really need to take target->d_lock?
+	 */
+	if (IS_ROOT(dentry) || dentry->d_parent == target->d_parent)
+		spin_lock(&target->d_parent->d_lock);
+	else {
+		if (d_ancestor(dentry->d_parent, target->d_parent)) {
+			spin_lock(&dentry->d_parent->d_lock);
+			spin_lock_nested(&target->d_parent->d_lock,
+						DENTRY_D_LOCK_NESTED);
+		} else {
+			spin_lock(&target->d_parent->d_lock);
+			spin_lock_nested(&dentry->d_parent->d_lock,
+						DENTRY_D_LOCK_NESTED);
+		}
+	}
+	if (target < dentry) {
+		spin_lock_nested(&target->d_lock, 2);
+		spin_lock_nested(&dentry->d_lock, 3);
+	} else {
+		spin_lock_nested(&dentry->d_lock, 2);
+		spin_lock_nested(&target->d_lock, 3);
+	}
+}
+
+static void dentry_unlock_parents_for_move(struct dentry *dentry,
+					struct dentry *target)
+{
+	if (target->d_parent != dentry->d_parent)
+		spin_unlock(&dentry->d_parent->d_lock);
+	if (target->d_parent != target)
+		spin_unlock(&target->d_parent->d_lock);
+}
+
 /*
- * We cannibalize "target" when moving dentry on top of it,
- * because it's going to be thrown away anyway. We could be more
- * polite about it, though.
- *
- * This forceful removal will result in ugly /proc output if
- * somebody holds a file open that got deleted due to a rename.
- * We could be nicer about the deleted file, and let it show
- * up under the name it had before it was deleted rather than
- * under the original name of the file that was moved on top of it.
+ * When switching names, the actual string doesn't strictly have to
+ * be preserved in the target - because we're dropping the target
+ * anyway. As such, we can just do a simple memcpy() to copy over
+ * the new name before we switch.
+ *
+ * Note that we have to be a lot more careful about getting the hash
+ * switched - we have to switch the hash value properly even if it
+ * then no longer matches the actual (corrupted) string of the target.
+ * The hash value has to match the hash queue that the dentry is on..
  */
- 
 /*
- * d_move_locked - move a dentry
+ * d_move - move a dentry
  * @dentry: entry to move
  * @target: new dentry
  *
  * Update the dcache to reflect the move of a file name. Negative
  * dcache entries should not be moved in this way.
  */
-static void d_move_locked(struct dentry * dentry, struct dentry * target)
+void d_move(struct dentry * dentry, struct dentry * target)
 {
-	struct hlist_head *list;
-
 	if (!dentry->d_inode)
 		printk(KERN_WARNING "VFS: moving negative dcache entry\n");
 
+	BUG_ON(d_ancestor(dentry, target));
+	BUG_ON(d_ancestor(target, dentry));
+
 	write_seqlock(&rename_lock);
-	/*
-	 * XXXX: do we really need to take target->d_lock?
-	 */
-	if (target < dentry) {
-		spin_lock(&target->d_lock);
-		spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
-	} else {
-		spin_lock(&dentry->d_lock);
-		spin_lock_nested(&target->d_lock, DENTRY_D_LOCK_NESTED);
-	}
 
-	/* Move the dentry to the target hash queue, if on different bucket */
-	if (d_unhashed(dentry))
-		goto already_unhashed;
+	dentry_lock_for_move(dentry, target);
 
-	hlist_del_rcu(&dentry->d_hash);
+	write_seqcount_begin(&dentry->d_seq);
+	write_seqcount_begin(&target->d_seq);
 
-already_unhashed:
-	list = d_hash(target->d_parent, target->d_name.hash);
-	__d_rehash(dentry, list);
+	/* __d_drop does write_seqcount_barrier, but they're OK to nest. */
+
+	/*
+	 * Move the dentry to the target hash queue. Don't bother checking
+	 * for the same hash queue because of how unlikely it is.
+	 */
+	__d_drop(dentry);
+	__d_rehash(dentry, d_hash(target->d_parent, target->d_name.hash));
 
 	/* Unhash the target: dput() will then get rid of it */
 	__d_drop(target);
@@ -1715,27 +2246,16 @@ already_unhashed:
 	}
 
 	list_add(&dentry->d_u.d_child, &dentry->d_parent->d_subdirs);
+
+	write_seqcount_end(&target->d_seq);
+	write_seqcount_end(&dentry->d_seq);
+
+	dentry_unlock_parents_for_move(dentry, target);
 	spin_unlock(&target->d_lock);
 	fsnotify_d_move(dentry);
 	spin_unlock(&dentry->d_lock);
 	write_sequnlock(&rename_lock);
 }
-
-/**
- * d_move - move a dentry
- * @dentry: entry to move
- * @target: new dentry
- *
- * Update the dcache to reflect the move of a file name. Negative
- * dcache entries should not be moved in this way.
- */
-
-void d_move(struct dentry * dentry, struct dentry * target)
-{
-	spin_lock(&dcache_lock);
-	d_move_locked(dentry, target);
-	spin_unlock(&dcache_lock);
-}
 EXPORT_SYMBOL(d_move);
 
 /**
@@ -1761,13 +2281,13 @@ struct dentry *d_ancestor(struct dentry *p1, struct dentry *p2)
  * This helper attempts to cope with remotely renamed directories
  *
  * It assumes that the caller is already holding
- * dentry->d_parent->d_inode->i_mutex and the dcache_lock
+ * dentry->d_parent->d_inode->i_mutex and the inode->i_lock
  *
  * Note: If ever the locking in lock_rename() changes, then please
  * remember to update this too...
  */
-static struct dentry *__d_unalias(struct dentry *dentry, struct dentry *alias)
-	__releases(dcache_lock)
+static struct dentry *__d_unalias(struct inode *inode,
+		struct dentry *dentry, struct dentry *alias)
 {
 	struct mutex *m1 = NULL, *m2 = NULL;
 	struct dentry *ret;
@@ -1790,10 +2310,10 @@ static struct dentry *__d_unalias(struct dentry *dentry, struct dentry *alias)
 		goto out_err;
 	m2 = &alias->d_parent->d_inode->i_mutex;
 out_unalias:
-	d_move_locked(alias, dentry);
+	d_move(alias, dentry);
 	ret = alias;
 out_err:
-	spin_unlock(&dcache_lock);
+	spin_unlock(&inode->i_lock);
 	if (m2)
 		mutex_unlock(m2);
 	if (m1)
@@ -1804,17 +2324,23 @@ out_err:
 /*
  * Prepare an anonymous dentry for life in the superblock's dentry tree as a
  * named dentry in place of the dentry to be replaced.
+ * returns with anon->d_lock held!
  */
 static void __d_materialise_dentry(struct dentry *dentry, struct dentry *anon)
 {
 	struct dentry *dparent, *aparent;
 
-	switch_names(dentry, anon);
-	swap(dentry->d_name.hash, anon->d_name.hash);
+	dentry_lock_for_move(anon, dentry);
+
+	write_seqcount_begin(&dentry->d_seq);
+	write_seqcount_begin(&anon->d_seq);
 
 	dparent = dentry->d_parent;
 	aparent = anon->d_parent;
 
+	switch_names(dentry, anon);
+	swap(dentry->d_name.hash, anon->d_name.hash);
+
 	dentry->d_parent = (aparent == anon) ? dentry : aparent;
 	list_del(&dentry->d_u.d_child);
 	if (!IS_ROOT(dentry))
@@ -1829,6 +2355,13 @@ static void __d_materialise_dentry(struct dentry *dentry, struct dentry *anon)
 	else
 		INIT_LIST_HEAD(&anon->d_u.d_child);
 
+	write_seqcount_end(&dentry->d_seq);
+	write_seqcount_end(&anon->d_seq);
+
+	dentry_unlock_parents_for_move(anon, dentry);
+	spin_unlock(&dentry->d_lock);
+
+	/* anon->d_lock still locked, returns locked */
 	anon->d_flags &= ~DCACHE_DISCONNECTED;
 }
 
@@ -1846,14 +2379,15 @@ struct dentry *d_materialise_unique(struct dentry *dentry, struct inode *inode)
 
 	BUG_ON(!d_unhashed(dentry));
 
-	spin_lock(&dcache_lock);
-
 	if (!inode) {
 		actual = dentry;
 		__d_instantiate(dentry, NULL);
-		goto found_lock;
+		d_rehash(actual);
+		goto out_nolock;
 	}
 
+	spin_lock(&inode->i_lock);
+
 	if (S_ISDIR(inode->i_mode)) {
 		struct dentry *alias;
 
@@ -1864,13 +2398,12 @@ struct dentry *d_materialise_unique(struct dentry *dentry, struct inode *inode)
 			/* Is this an anonymous mountpoint that we could splice
 			 * into our tree? */
 			if (IS_ROOT(alias)) {
-				spin_lock(&alias->d_lock);
 				__d_materialise_dentry(dentry, alias);
 				__d_drop(alias);
 				goto found;
 			}
 			/* Nope, but we must(!) avoid directory aliasing */
-			actual = __d_unalias(dentry, alias);
+			actual = __d_unalias(inode, dentry, alias);
 			if (IS_ERR(actual))
 				dput(alias);
 			goto out_nolock;
@@ -1881,15 +2414,14 @@ struct dentry *d_materialise_unique(struct dentry *dentry, struct inode *inode)
 	actual = __d_instantiate_unique(dentry, inode);
 	if (!actual)
 		actual = dentry;
-	else if (unlikely(!d_unhashed(actual)))
-		goto shouldnt_be_hashed;
+	else
+		BUG_ON(!d_unhashed(actual));
 
-found_lock:
 	spin_lock(&actual->d_lock);
 found:
 	_d_rehash(actual);
 	spin_unlock(&actual->d_lock);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&inode->i_lock);
 out_nolock:
 	if (actual == dentry) {
 		security_d_instantiate(dentry, inode);
@@ -1898,10 +2430,6 @@ out_nolock:
 
 	iput(inode);
 	return actual;
-
-shouldnt_be_hashed:
-	spin_unlock(&dcache_lock);
-	BUG();
 }
 EXPORT_SYMBOL_GPL(d_materialise_unique);
 
@@ -1928,7 +2456,7 @@ static int prepend_name(char **buffer, int *buflen, struct qstr *name)
  * @buffer: pointer to the end of the buffer
  * @buflen: pointer to buffer length
  *
- * Caller holds the dcache_lock.
+ * Caller holds the rename_lock.
  *
  * If path is not reachable from the supplied root, then the value of
  * root is changed (without modifying refcounts).
@@ -1956,7 +2484,9 @@ static int prepend_path(const struct path *path, struct path *root,
 		}
 		parent = dentry->d_parent;
 		prefetch(parent);
+		spin_lock(&dentry->d_lock);
 		error = prepend_name(buffer, buflen, &dentry->d_name);
+		spin_unlock(&dentry->d_lock);
 		if (!error)
 			error = prepend(buffer, buflen, "/", 1);
 		if (error)
@@ -2012,9 +2542,9 @@ char *__d_path(const struct path *path, struct path *root,
 	int error;
 
 	prepend(&res, &buflen, "\0", 1);
-	spin_lock(&dcache_lock);
+	write_seqlock(&rename_lock);
 	error = prepend_path(path, root, &res, &buflen);
-	spin_unlock(&dcache_lock);
+	write_sequnlock(&rename_lock);
 
 	if (error)
 		return ERR_PTR(error);
@@ -2076,12 +2606,12 @@ char *d_path(const struct path *path, char *buf, int buflen)
 		return path->dentry->d_op->d_dname(path->dentry, buf, buflen);
 
 	get_fs_root(current->fs, &root);
-	spin_lock(&dcache_lock);
+	write_seqlock(&rename_lock);
 	tmp = root;
 	error = path_with_deleted(path, &tmp, &res, &buflen);
 	if (error)
 		res = ERR_PTR(error);
-	spin_unlock(&dcache_lock);
+	write_sequnlock(&rename_lock);
 	path_put(&root);
 	return res;
 }
@@ -2107,12 +2637,12 @@ char *d_path_with_unreachable(const struct path *path, char *buf, int buflen)
 		return path->dentry->d_op->d_dname(path->dentry, buf, buflen);
 
 	get_fs_root(current->fs, &root);
-	spin_lock(&dcache_lock);
+	write_seqlock(&rename_lock);
 	tmp = root;
 	error = path_with_deleted(path, &tmp, &res, &buflen);
 	if (!error && !path_equal(&tmp, &root))
 		error = prepend_unreachable(&res, &buflen);
-	spin_unlock(&dcache_lock);
+	write_sequnlock(&rename_lock);
 	path_put(&root);
 	if (error)
 		res =  ERR_PTR(error);
@@ -2144,7 +2674,7 @@ char *dynamic_dname(struct dentry *dentry, char *buffer, int buflen,
 /*
  * Write full pathname from the root of the filesystem into the buffer.
  */
-char *__dentry_path(struct dentry *dentry, char *buf, int buflen)
+static char *__dentry_path(struct dentry *dentry, char *buf, int buflen)
 {
 	char *end = buf + buflen;
 	char *retval;
@@ -2158,10 +2688,13 @@ char *__dentry_path(struct dentry *dentry, char *buf, int buflen)
 
 	while (!IS_ROOT(dentry)) {
 		struct dentry *parent = dentry->d_parent;
+		int error;
 
 		prefetch(parent);
-		if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) ||
-		    (prepend(&end, &buflen, "/", 1) != 0))
+		spin_lock(&dentry->d_lock);
+		error = prepend_name(&end, &buflen, &dentry->d_name);
+		spin_unlock(&dentry->d_lock);
+		if (error != 0 || prepend(&end, &buflen, "/", 1) != 0)
 			goto Elong;
 
 		retval = end;
@@ -2171,14 +2704,25 @@ char *__dentry_path(struct dentry *dentry, char *buf, int buflen)
 Elong:
 	return ERR_PTR(-ENAMETOOLONG);
 }
-EXPORT_SYMBOL(__dentry_path);
+
+char *dentry_path_raw(struct dentry *dentry, char *buf, int buflen)
+{
+	char *retval;
+
+	write_seqlock(&rename_lock);
+	retval = __dentry_path(dentry, buf, buflen);
+	write_sequnlock(&rename_lock);
+
+	return retval;
+}
+EXPORT_SYMBOL(dentry_path_raw);
 
 char *dentry_path(struct dentry *dentry, char *buf, int buflen)
 {
 	char *p = NULL;
 	char *retval;
 
-	spin_lock(&dcache_lock);
+	write_seqlock(&rename_lock);
 	if (d_unlinked(dentry)) {
 		p = buf + buflen;
 		if (prepend(&p, &buflen, "//deleted", 10) != 0)
@@ -2186,12 +2730,11 @@ char *dentry_path(struct dentry *dentry, char *buf, int buflen)
 		buflen++;
 	}
 	retval = __dentry_path(dentry, buf, buflen);
-	spin_unlock(&dcache_lock);
+	write_sequnlock(&rename_lock);
 	if (!IS_ERR(retval) && p)
 		*p = '/';	/* restore '/' overriden with '\0' */
 	return retval;
 Elong:
-	spin_unlock(&dcache_lock);
 	return ERR_PTR(-ENAMETOOLONG);
 }
 
@@ -2225,7 +2768,7 @@ SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size)
 	get_fs_root_and_pwd(current->fs, &root, &pwd);
 
 	error = -ENOENT;
-	spin_lock(&dcache_lock);
+	write_seqlock(&rename_lock);
 	if (!d_unlinked(pwd.dentry)) {
 		unsigned long len;
 		struct path tmp = root;
@@ -2234,7 +2777,7 @@ SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size)
 
 		prepend(&cwd, &buflen, "\0", 1);
 		error = prepend_path(&pwd, &tmp, &cwd, &buflen);
-		spin_unlock(&dcache_lock);
+		write_sequnlock(&rename_lock);
 
 		if (error)
 			goto out;
@@ -2253,8 +2796,9 @@ SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size)
 			if (copy_to_user(buf, cwd, len))
 				error = -EFAULT;
 		}
-	} else
-		spin_unlock(&dcache_lock);
+	} else {
+		write_sequnlock(&rename_lock);
+	}
 
 out:
 	path_put(&pwd);
@@ -2282,25 +2826,25 @@ out:
 int is_subdir(struct dentry *new_dentry, struct dentry *old_dentry)
 {
 	int result;
-	unsigned long seq;
+	unsigned seq;
 
 	if (new_dentry == old_dentry)
 		return 1;
 
-	/*
-	 * Need rcu_readlock to protect against the d_parent trashing
-	 * due to d_move
-	 */
-	rcu_read_lock();
 	do {
 		/* for restarting inner loop in case of seq retry */
 		seq = read_seqbegin(&rename_lock);
+		/*
+		 * Need rcu_readlock to protect against the d_parent trashing
+		 * due to d_move
+		 */
+		rcu_read_lock();
 		if (d_ancestor(old_dentry, new_dentry))
 			result = 1;
 		else
 			result = 0;
+		rcu_read_unlock();
 	} while (read_seqretry(&rename_lock, seq));
-	rcu_read_unlock();
 
 	return result;
 }
@@ -2332,10 +2876,15 @@ EXPORT_SYMBOL(path_is_under);
 
 void d_genocide(struct dentry *root)
 {
-	struct dentry *this_parent = root;
+	struct dentry *this_parent;
 	struct list_head *next;
+	unsigned seq;
+	int locked = 0;
 
-	spin_lock(&dcache_lock);
+	seq = read_seqbegin(&rename_lock);
+again:
+	this_parent = root;
+	spin_lock(&this_parent->d_lock);
 repeat:
 	next = this_parent->d_subdirs.next;
 resume:
@@ -2343,21 +2892,62 @@ resume:
 		struct list_head *tmp = next;
 		struct dentry *dentry = list_entry(tmp, struct dentry, d_u.d_child);
 		next = tmp->next;
-		if (d_unhashed(dentry)||!dentry->d_inode)
+
+		spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
+		if (d_unhashed(dentry) || !dentry->d_inode) {
+			spin_unlock(&dentry->d_lock);
 			continue;
+		}
 		if (!list_empty(&dentry->d_subdirs)) {
+			spin_unlock(&this_parent->d_lock);
+			spin_release(&dentry->d_lock.dep_map, 1, _RET_IP_);
 			this_parent = dentry;
+			spin_acquire(&this_parent->d_lock.dep_map, 0, 1, _RET_IP_);
 			goto repeat;
 		}
-		atomic_dec(&dentry->d_count);
+		if (!(dentry->d_flags & DCACHE_GENOCIDE)) {
+			dentry->d_flags |= DCACHE_GENOCIDE;
+			dentry->d_count--;
+		}
+		spin_unlock(&dentry->d_lock);
 	}
 	if (this_parent != root) {
-		next = this_parent->d_u.d_child.next;
-		atomic_dec(&this_parent->d_count);
-		this_parent = this_parent->d_parent;
+		struct dentry *tmp;
+		struct dentry *child;
+
+		tmp = this_parent->d_parent;
+		if (!(this_parent->d_flags & DCACHE_GENOCIDE)) {
+			this_parent->d_flags |= DCACHE_GENOCIDE;
+			this_parent->d_count--;
+		}
+		rcu_read_lock();
+		spin_unlock(&this_parent->d_lock);
+		child = this_parent;
+		this_parent = tmp;
+		spin_lock(&this_parent->d_lock);
+		/* might go back up the wrong parent if we have had a rename
+		 * or deletion */
+		if (this_parent != child->d_parent ||
+			 (!locked && read_seqretry(&rename_lock, seq))) {
+			spin_unlock(&this_parent->d_lock);
+			rcu_read_unlock();
+			goto rename_retry;
+		}
+		rcu_read_unlock();
+		next = child->d_u.d_child.next;
 		goto resume;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&this_parent->d_lock);
+	if (!locked && read_seqretry(&rename_lock, seq))
+		goto rename_retry;
+	if (locked)
+		write_sequnlock(&rename_lock);
+	return;
+
+rename_retry:
+	locked = 1;
+	write_seqlock(&rename_lock);
+	goto again;
 }
 
 /**
@@ -2411,7 +3001,7 @@ static void __init dcache_init_early(void)
 
 	dentry_hashtable =
 		alloc_large_system_hash("Dentry cache",
-					sizeof(struct hlist_head),
+					sizeof(struct dcache_hash_bucket),
 					dhash_entries,
 					13,
 					HASH_EARLY,
@@ -2420,16 +3010,13 @@ static void __init dcache_init_early(void)
 					0);
 
 	for (loop = 0; loop < (1 << d_hash_shift); loop++)
-		INIT_HLIST_HEAD(&dentry_hashtable[loop]);
+		INIT_HLIST_BL_HEAD(&dentry_hashtable[loop].head);
 }
 
 static void __init dcache_init(void)
 {
 	int loop;
 
-	percpu_counter_init(&nr_dentry, 0);
-	percpu_counter_init(&nr_dentry_unused, 0);
-
 	/* 
 	 * A constructor could be added for stable state like the lists,
 	 * but it is probably not worth it because of the cache nature
@@ -2446,7 +3033,7 @@ static void __init dcache_init(void)
 
 	dentry_hashtable =
 		alloc_large_system_hash("Dentry cache",
-					sizeof(struct hlist_head),
+					sizeof(struct dcache_hash_bucket),
 					dhash_entries,
 					13,
 					0,
@@ -2455,7 +3042,7 @@ static void __init dcache_init(void)
 					0);
 
 	for (loop = 0; loop < (1 << d_hash_shift); loop++)
-		INIT_HLIST_HEAD(&dentry_hashtable[loop]);
+		INIT_HLIST_BL_HEAD(&dentry_hashtable[loop].head);
 }
 
 /* SLAB cache for __getname() consumers */
diff --git a/fs/ecryptfs/dentry.c b/fs/ecryptfs/dentry.c
index 906e803f7f7..6fc4f319b55 100644
--- a/fs/ecryptfs/dentry.c
+++ b/fs/ecryptfs/dentry.c
@@ -44,12 +44,17 @@
  */
 static int ecryptfs_d_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
-	struct vfsmount *lower_mnt = ecryptfs_dentry_to_lower_mnt(dentry);
+	struct dentry *lower_dentry;
+	struct vfsmount *lower_mnt;
 	struct dentry *dentry_save;
 	struct vfsmount *vfsmount_save;
 	int rc = 1;
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	lower_dentry = ecryptfs_dentry_to_lower(dentry);
+	lower_mnt = ecryptfs_dentry_to_lower_mnt(dentry);
 	if (!lower_dentry->d_op || !lower_dentry->d_op->d_revalidate)
 		goto out;
 	dentry_save = nd->path.dentry;
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 9d1a22d6276..337352a9475 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -260,7 +260,7 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry,
 				   ecryptfs_dentry->d_parent));
 	lower_inode = lower_dentry->d_inode;
 	fsstack_copy_attr_atime(ecryptfs_dir_inode, lower_dir_dentry->d_inode);
-	BUG_ON(!atomic_read(&lower_dentry->d_count));
+	BUG_ON(!lower_dentry->d_count);
 	ecryptfs_set_dentry_private(ecryptfs_dentry,
 				    kmem_cache_alloc(ecryptfs_dentry_info_cache,
 						     GFP_KERNEL));
@@ -441,7 +441,7 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 	struct qstr lower_name;
 	int rc = 0;
 
-	ecryptfs_dentry->d_op = &ecryptfs_dops;
+	d_set_d_op(ecryptfs_dentry, &ecryptfs_dops);
 	if ((ecryptfs_dentry->d_name.len == 1
 	     && !strcmp(ecryptfs_dentry->d_name.name, "."))
 	    || (ecryptfs_dentry->d_name.len == 2
@@ -454,7 +454,7 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 	lower_name.hash = ecryptfs_dentry->d_name.hash;
 	if (lower_dir_dentry->d_op && lower_dir_dentry->d_op->d_hash) {
 		rc = lower_dir_dentry->d_op->d_hash(lower_dir_dentry,
-						    &lower_name);
+				lower_dir_dentry->d_inode, &lower_name);
 		if (rc < 0)
 			goto out_d_drop;
 	}
@@ -489,7 +489,7 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode,
 	lower_name.hash = full_name_hash(lower_name.name, lower_name.len);
 	if (lower_dir_dentry->d_op && lower_dir_dentry->d_op->d_hash) {
 		rc = lower_dir_dentry->d_op->d_hash(lower_dir_dentry,
-						    &lower_name);
+				lower_dir_dentry->d_inode, &lower_name);
 		if (rc < 0)
 			goto out_d_drop;
 	}
@@ -980,8 +980,10 @@ int ecryptfs_truncate(struct dentry *dentry, loff_t new_length)
 }
 
 static int
-ecryptfs_permission(struct inode *inode, int mask)
+ecryptfs_permission(struct inode *inode, int mask, unsigned int flags)
 {
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
 	return inode_permission(ecryptfs_inode_to_lower(inode), mask);
 }
 
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index a9dbd62518e..35103867537 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -189,7 +189,7 @@ int ecryptfs_interpose(struct dentry *lower_dentry, struct dentry *dentry,
 	if (special_file(lower_inode->i_mode))
 		init_special_inode(inode, lower_inode->i_mode,
 				   lower_inode->i_rdev);
-	dentry->d_op = &ecryptfs_dops;
+	d_set_d_op(dentry, &ecryptfs_dops);
 	fsstack_copy_attr_all(inode, lower_inode);
 	/* This size will be overwritten for real files w/ headers and
 	 * other metadata */
@@ -594,7 +594,7 @@ static struct dentry *ecryptfs_mount(struct file_system_type *fs_type, int flags
 		deactivate_locked_super(s);
 		goto out;
 	}
-	s->s_root->d_op = &ecryptfs_dops;
+	d_set_d_op(s->s_root, &ecryptfs_dops);
 	s->s_root->d_sb = s;
 	s->s_root->d_parent = s->s_root;
 
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index 253732382d3..3042fe123a3 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -28,7 +28,6 @@
 #include <linux/key.h>
 #include <linux/slab.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/file.h>
 #include <linux/crypto.h>
 #include "ecryptfs_kernel.h"
@@ -63,6 +62,16 @@ out:
 	return inode;
 }
 
+static void ecryptfs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	struct ecryptfs_inode_info *inode_info;
+	inode_info = ecryptfs_inode_to_private(inode);
+
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(ecryptfs_inode_info_cache, inode_info);
+}
+
 /**
  * ecryptfs_destroy_inode
  * @inode: The ecryptfs inode
@@ -89,7 +98,7 @@ static void ecryptfs_destroy_inode(struct inode *inode)
 		}
 	}
 	ecryptfs_destroy_crypt_stat(&inode_info->crypt_stat);
-	kmem_cache_free(ecryptfs_inode_info_cache, inode_info);
+	call_rcu(&inode->i_rcu, ecryptfs_i_callback);
 }
 
 /**
diff --git a/fs/efs/super.c b/fs/efs/super.c
index 5073a07652c..0f31acb0131 100644
--- a/fs/efs/super.c
+++ b/fs/efs/super.c
@@ -65,11 +65,18 @@ static struct inode *efs_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void efs_destroy_inode(struct inode *inode)
+static void efs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(efs_inode_cachep, INODE_INFO(inode));
 }
 
+static void efs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, efs_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct efs_inode_info *ei = (struct efs_inode_info *) foo;
diff --git a/fs/exec.c b/fs/exec.c
index 99d33a1371e..c62efcb959c 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -164,7 +164,26 @@ out:
 
 #ifdef CONFIG_MMU
 
-static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+{
+	struct mm_struct *mm = current->mm;
+	long diff = (long)(pages - bprm->vma_pages);
+
+	if (!mm || !diff)
+		return;
+
+	bprm->vma_pages = pages;
+
+#ifdef SPLIT_RSS_COUNTING
+	add_mm_counter(mm, MM_ANONPAGES, diff);
+#else
+	spin_lock(&mm->page_table_lock);
+	add_mm_counter(mm, MM_ANONPAGES, diff);
+	spin_unlock(&mm->page_table_lock);
+#endif
+}
+
+struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
 		int write)
 {
 	struct page *page;
@@ -186,6 +205,8 @@ static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
 		unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start;
 		struct rlimit *rlim;
 
+		acct_arg_size(bprm, size / PAGE_SIZE);
+
 		/*
 		 * We've historically supported up to 32 pages (ARG_MAX)
 		 * of argument strings even with small stacks
@@ -254,6 +275,11 @@ static int __bprm_mm_init(struct linux_binprm *bprm)
 	vma->vm_flags = VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP;
 	vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
 	INIT_LIST_HEAD(&vma->anon_vma_chain);
+
+	err = security_file_mmap(NULL, 0, 0, 0, vma->vm_start, 1);
+	if (err)
+		goto err;
+
 	err = insert_vm_struct(mm, vma);
 	if (err)
 		goto err;
@@ -276,7 +302,11 @@ static bool valid_arg_len(struct linux_binprm *bprm, long len)
 
 #else
 
-static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+{
+}
+
+struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
 		int write)
 {
 	struct page *page;
@@ -1003,6 +1033,7 @@ int flush_old_exec(struct linux_binprm * bprm)
 	/*
 	 * Release all of the old mmap stuff
 	 */
+	acct_arg_size(bprm, 0);
 	retval = exec_mmap(bprm->mm);
 	if (retval)
 		goto out;
@@ -1426,8 +1457,10 @@ int do_execve(const char * filename,
 	return retval;
 
 out:
-	if (bprm->mm)
-		mmput (bprm->mm);
+	if (bprm->mm) {
+		acct_arg_size(bprm, 0);
+		mmput(bprm->mm);
+	}
 
 out_file:
 	if (bprm->file) {
diff --git a/fs/exofs/super.c b/fs/exofs/super.c
index 79c3ae6e045..8c6c4669b38 100644
--- a/fs/exofs/super.c
+++ b/fs/exofs/super.c
@@ -150,12 +150,19 @@ static struct inode *exofs_alloc_inode(struct super_block *sb)
 	return &oi->vfs_inode;
 }
 
+static void exofs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(exofs_inode_cachep, exofs_i(inode));
+}
+
 /*
  * Remove an inode from the cache
  */
 static void exofs_destroy_inode(struct inode *inode)
 {
-	kmem_cache_free(exofs_inode_cachep, exofs_i(inode));
+	call_rcu(&inode->i_rcu, exofs_i_callback);
 }
 
 /*
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c
index 51b304056f1..4b6825740dd 100644
--- a/fs/exportfs/expfs.c
+++ b/fs/exportfs/expfs.c
@@ -43,24 +43,26 @@ find_acceptable_alias(struct dentry *result,
 		void *context)
 {
 	struct dentry *dentry, *toput = NULL;
+	struct inode *inode;
 
 	if (acceptable(context, result))
 		return result;
 
-	spin_lock(&dcache_lock);
-	list_for_each_entry(dentry, &result->d_inode->i_dentry, d_alias) {
-		dget_locked(dentry);
-		spin_unlock(&dcache_lock);
+	inode = result->d_inode;
+	spin_lock(&inode->i_lock);
+	list_for_each_entry(dentry, &inode->i_dentry, d_alias) {
+		dget(dentry);
+		spin_unlock(&inode->i_lock);
 		if (toput)
 			dput(toput);
 		if (dentry != result && acceptable(context, dentry)) {
 			dput(result);
 			return dentry;
 		}
-		spin_lock(&dcache_lock);
+		spin_lock(&inode->i_lock);
 		toput = dentry;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&inode->i_lock);
 
 	if (toput)
 		dput(toput);
diff --git a/fs/ext2/acl.c b/fs/ext2/acl.c
index 2bcc0431bad..7b4180554a6 100644
--- a/fs/ext2/acl.c
+++ b/fs/ext2/acl.c
@@ -232,10 +232,17 @@ ext2_set_acl(struct inode *inode, int type, struct posix_acl *acl)
 }
 
 int
-ext2_check_acl(struct inode *inode, int mask)
+ext2_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
-	struct posix_acl *acl = ext2_get_acl(inode, ACL_TYPE_ACCESS);
+	struct posix_acl *acl;
+
+	if (flags & IPERM_FLAG_RCU) {
+		if (!negative_cached_acl(inode, ACL_TYPE_ACCESS))
+			return -ECHILD;
+		return -EAGAIN;
+	}
 
+	acl = ext2_get_acl(inode, ACL_TYPE_ACCESS);
 	if (IS_ERR(acl))
 		return PTR_ERR(acl);
 	if (acl) {
diff --git a/fs/ext2/acl.h b/fs/ext2/acl.h
index 3ff6cbb9ac4..c939b7b1209 100644
--- a/fs/ext2/acl.h
+++ b/fs/ext2/acl.h
@@ -54,7 +54,7 @@ static inline int ext2_acl_count(size_t size)
 #ifdef CONFIG_EXT2_FS_POSIX_ACL
 
 /* acl.c */
-extern int ext2_check_acl (struct inode *, int);
+extern int ext2_check_acl (struct inode *, int, unsigned int);
 extern int ext2_acl_chmod (struct inode *);
 extern int ext2_init_acl (struct inode *, struct inode *);
 
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index d89e0b6a2d7..e0c6380ff99 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -161,11 +161,18 @@ static struct inode *ext2_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void ext2_destroy_inode(struct inode *inode)
+static void ext2_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(ext2_inode_cachep, EXT2_I(inode));
 }
 
+static void ext2_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, ext2_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct ext2_inode_info *ei = (struct ext2_inode_info *) foo;
diff --git a/fs/ext3/acl.c b/fs/ext3/acl.c
index 8a11fe21218..e4fa49e6c53 100644
--- a/fs/ext3/acl.c
+++ b/fs/ext3/acl.c
@@ -240,10 +240,17 @@ ext3_set_acl(handle_t *handle, struct inode *inode, int type,
 }
 
 int
-ext3_check_acl(struct inode *inode, int mask)
+ext3_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
-	struct posix_acl *acl = ext3_get_acl(inode, ACL_TYPE_ACCESS);
+	struct posix_acl *acl;
+
+	if (flags & IPERM_FLAG_RCU) {
+		if (!negative_cached_acl(inode, ACL_TYPE_ACCESS))
+			return -ECHILD;
+		return -EAGAIN;
+	}
 
+	acl = ext3_get_acl(inode, ACL_TYPE_ACCESS);
 	if (IS_ERR(acl))
 		return PTR_ERR(acl);
 	if (acl) {
diff --git a/fs/ext3/acl.h b/fs/ext3/acl.h
index 597334626de..5faf8048e90 100644
--- a/fs/ext3/acl.h
+++ b/fs/ext3/acl.h
@@ -54,7 +54,7 @@ static inline int ext3_acl_count(size_t size)
 #ifdef CONFIG_EXT3_FS_POSIX_ACL
 
 /* acl.c */
-extern int ext3_check_acl (struct inode *, int);
+extern int ext3_check_acl (struct inode *, int, unsigned int);
 extern int ext3_acl_chmod (struct inode *);
 extern int ext3_init_acl (handle_t *, struct inode *, struct inode *);
 
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 2fedaf8b501..77ce1616f72 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -27,7 +27,6 @@
 #include <linux/init.h>
 #include <linux/blkdev.h>
 #include <linux/parser.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/exportfs.h>
 #include <linux/vfs.h>
@@ -480,6 +479,13 @@ static struct inode *ext3_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
+static void ext3_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(ext3_inode_cachep, EXT3_I(inode));
+}
+
 static void ext3_destroy_inode(struct inode *inode)
 {
 	if (!list_empty(&(EXT3_I(inode)->i_orphan))) {
@@ -490,7 +496,7 @@ static void ext3_destroy_inode(struct inode *inode)
 				false);
 		dump_stack();
 	}
-	kmem_cache_free(ext3_inode_cachep, EXT3_I(inode));
+	call_rcu(&inode->i_rcu, ext3_i_callback);
 }
 
 static void init_once(void *foo)
diff --git a/fs/ext4/acl.c b/fs/ext4/acl.c
index 5e2ed4504ea..e0270d1f8d8 100644
--- a/fs/ext4/acl.c
+++ b/fs/ext4/acl.c
@@ -238,10 +238,17 @@ ext4_set_acl(handle_t *handle, struct inode *inode, int type,
 }
 
 int
-ext4_check_acl(struct inode *inode, int mask)
+ext4_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
-	struct posix_acl *acl = ext4_get_acl(inode, ACL_TYPE_ACCESS);
+	struct posix_acl *acl;
+
+	if (flags & IPERM_FLAG_RCU) {
+		if (!negative_cached_acl(inode, ACL_TYPE_ACCESS))
+			return -ECHILD;
+		return -EAGAIN;
+	}
 
+	acl = ext4_get_acl(inode, ACL_TYPE_ACCESS);
 	if (IS_ERR(acl))
 		return PTR_ERR(acl);
 	if (acl) {
diff --git a/fs/ext4/acl.h b/fs/ext4/acl.h
index 9d843d5deac..dec821168fd 100644
--- a/fs/ext4/acl.h
+++ b/fs/ext4/acl.h
@@ -54,7 +54,7 @@ static inline int ext4_acl_count(size_t size)
 #ifdef CONFIG_EXT4_FS_POSIX_ACL
 
 /* acl.c */
-extern int ext4_check_acl(struct inode *, int);
+extern int ext4_check_acl(struct inode *, int, unsigned int);
 extern int ext4_acl_chmod(struct inode *);
 extern int ext4_init_acl(handle_t *, struct inode *, struct inode *);
 
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 6a5edea2d70..94ce3d7a1c4 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -910,6 +910,7 @@ struct ext4_inode_info {
 #define EXT4_MOUNT_JOURNAL_CHECKSUM	0x800000 /* Journal checksums */
 #define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT	0x1000000 /* Journal Async Commit */
 #define EXT4_MOUNT_I_VERSION            0x2000000 /* i_version support */
+#define EXT4_MOUNT_MBLK_IO_SUBMIT	0x4000000 /* multi-block io submits */
 #define EXT4_MOUNT_DELALLOC		0x8000000 /* Delalloc support */
 #define EXT4_MOUNT_DATA_ERR_ABORT	0x10000000 /* Abort on file data write */
 #define EXT4_MOUNT_BLOCK_VALIDITY	0x20000000 /* Block validity checking */
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index bdbe6990220..e659597b690 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2125,9 +2125,12 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd,
 			 */
 			if (unlikely(journal_data && PageChecked(page)))
 				err = __ext4_journalled_writepage(page, len);
-			else
+			else if (test_opt(inode->i_sb, MBLK_IO_SUBMIT))
 				err = ext4_bio_write_page(&io_submit, page,
 							  len, mpd->wbc);
+			else
+				err = block_write_full_page(page,
+					noalloc_get_block_write, mpd->wbc);
 
 			if (!err)
 				mpd->pages_written++;
diff --git a/fs/ext4/ioctl.c b/fs/ext4/ioctl.c
index bf5ae883b1b..eb3bc2fe647 100644
--- a/fs/ext4/ioctl.c
+++ b/fs/ext4/ioctl.c
@@ -331,6 +331,30 @@ mext_out:
 		return err;
 	}
 
+	case FITRIM:
+	{
+		struct super_block *sb = inode->i_sb;
+		struct fstrim_range range;
+		int ret = 0;
+
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+
+		if (copy_from_user(&range, (struct fstrim_range *)arg,
+		    sizeof(range)))
+			return -EFAULT;
+
+		ret = ext4_trim_fs(sb, &range);
+		if (ret < 0)
+			return ret;
+
+		if (copy_to_user((struct fstrim_range *)arg, &range,
+		    sizeof(range)))
+			return -EFAULT;
+
+		return 0;
+	}
+
 	default:
 		return -ENOTTY;
 	}
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 92203b8a099..dc40e75cba8 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -872,7 +872,7 @@ static struct buffer_head * ext4_find_entry (struct inode *dir,
 	if (namelen > EXT4_NAME_LEN)
 		return NULL;
 	if ((namelen <= 2) && (name[0] == '.') &&
-	    (name[1] == '.' || name[1] == '0')) {
+	    (name[1] == '.' || name[1] == '\0')) {
 		/*
 		 * "." or ".." will only be in the first block
 		 * NFS may look up ".."; "." should be handled by the VFS
diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c
index 7f5451cd1d3..beacce11ac5 100644
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -237,8 +237,6 @@ static void ext4_end_bio(struct bio *bio, int error)
 			} while (bh != head);
 		}
 
-		put_io_page(io_end->pages[i]);
-
 		/*
 		 * If this is a partial write which happened to make
 		 * all buffers uptodate then we can optimize away a
@@ -248,6 +246,8 @@ static void ext4_end_bio(struct bio *bio, int error)
 		 */
 		if (!partial_write)
 			SetPageUptodate(page);
+
+		put_io_page(io_end->pages[i]);
 	}
 	io_end->num_io_pages = 0;
 	inode = io_end->inode;
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index dc963929de6..981c8477ada 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -232,6 +232,8 @@ static int setup_new_group_blocks(struct super_block *sb,
 			       GFP_NOFS);
 	if (err)
 		goto exit_bh;
+	for (i = 0, bit = gdblocks + 1; i < reserved_gdb; i++, bit++)
+		ext4_set_bit(bit, bh->b_data);
 
 	ext4_debug("mark block bitmap %#04llx (+%llu)\n", input->block_bitmap,
 		   input->block_bitmap - start);
@@ -247,6 +249,9 @@ static int setup_new_group_blocks(struct super_block *sb,
 	err = sb_issue_zeroout(sb, block, sbi->s_itb_per_group, GFP_NOFS);
 	if (err)
 		goto exit_bh;
+	for (i = 0, bit = input->inode_table - start;
+	     i < sbi->s_itb_per_group; i++, bit++)
+		ext4_set_bit(bit, bh->b_data);
 
 	if ((err = extend_or_restart_transaction(handle, 2, bh)))
 		goto exit_bh;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 61182fe6254..cd37f9d5e44 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -841,6 +841,13 @@ static int ext4_drop_inode(struct inode *inode)
 	return drop;
 }
 
+static void ext4_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(ext4_inode_cachep, EXT4_I(inode));
+}
+
 static void ext4_destroy_inode(struct inode *inode)
 {
 	ext4_ioend_wait(inode);
@@ -853,7 +860,7 @@ static void ext4_destroy_inode(struct inode *inode)
 				true);
 		dump_stack();
 	}
-	kmem_cache_free(ext4_inode_cachep, EXT4_I(inode));
+	call_rcu(&inode->i_rcu, ext4_i_callback);
 }
 
 static void init_once(void *foo)
@@ -1026,6 +1033,8 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs)
 	    !(def_mount_opts & EXT4_DEFM_NODELALLOC))
 		seq_puts(seq, ",nodelalloc");
 
+	if (test_opt(sb, MBLK_IO_SUBMIT))
+		seq_puts(seq, ",mblk_io_submit");
 	if (sbi->s_stripe)
 		seq_printf(seq, ",stripe=%lu", sbi->s_stripe);
 	/*
@@ -1197,7 +1206,6 @@ static const struct super_operations ext4_sops = {
 	.quota_write	= ext4_quota_write,
 #endif
 	.bdev_try_to_free_page = bdev_try_to_free_page,
-	.trim_fs	= ext4_trim_fs
 };
 
 static const struct super_operations ext4_nojournal_sops = {
@@ -1240,8 +1248,8 @@ enum {
 	Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
 	Opt_noquota, Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err,
 	Opt_resize, Opt_usrquota, Opt_grpquota, Opt_i_version,
-	Opt_stripe, Opt_delalloc, Opt_nodelalloc,
-	Opt_block_validity, Opt_noblock_validity,
+	Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_mblk_io_submit,
+	Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity,
 	Opt_inode_readahead_blks, Opt_journal_ioprio,
 	Opt_dioread_nolock, Opt_dioread_lock,
 	Opt_discard, Opt_nodiscard,
@@ -1305,6 +1313,8 @@ static const match_table_t tokens = {
 	{Opt_resize, "resize"},
 	{Opt_delalloc, "delalloc"},
 	{Opt_nodelalloc, "nodelalloc"},
+	{Opt_mblk_io_submit, "mblk_io_submit"},
+	{Opt_nomblk_io_submit, "nomblk_io_submit"},
 	{Opt_block_validity, "block_validity"},
 	{Opt_noblock_validity, "noblock_validity"},
 	{Opt_inode_readahead_blks, "inode_readahead_blks=%u"},
@@ -1726,6 +1736,12 @@ set_qf_format:
 		case Opt_nodelalloc:
 			clear_opt(sbi->s_mount_opt, DELALLOC);
 			break;
+		case Opt_mblk_io_submit:
+			set_opt(sbi->s_mount_opt, MBLK_IO_SUBMIT);
+			break;
+		case Opt_nomblk_io_submit:
+			clear_opt(sbi->s_mount_opt, MBLK_IO_SUBMIT);
+			break;
 		case Opt_stripe:
 			if (match_int(&args[0], &option))
 				return 0;
@@ -2799,9 +2815,6 @@ static void ext4_clear_request_list(void)
 	struct ext4_li_request *elr;
 
 	mutex_lock(&ext4_li_info->li_list_mtx);
-	if (list_empty(&ext4_li_info->li_request_list))
-		return;
-
 	list_for_each_safe(pos, n, &ext4_li_info->li_request_list) {
 		elr = list_entry(pos, struct ext4_li_request,
 				 lr_request);
@@ -3268,13 +3281,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 	 * Test whether we have more sectors than will fit in sector_t,
 	 * and whether the max offset is addressable by the page cache.
 	 */
-	ret = generic_check_addressable(sb->s_blocksize_bits,
+	err = generic_check_addressable(sb->s_blocksize_bits,
 					ext4_blocks_count(es));
-	if (ret) {
+	if (err) {
 		ext4_msg(sb, KERN_ERR, "filesystem"
 			 " too large to mount safely on this system");
 		if (sizeof(sector_t) < 8)
 			ext4_msg(sb, KERN_WARNING, "CONFIG_LBDAF not enabled");
+		ret = err;
 		goto failed_mount;
 	}
 
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index ad6998a92c3..206351af7c5 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -514,11 +514,18 @@ static struct inode *fat_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void fat_destroy_inode(struct inode *inode)
+static void fat_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(fat_inode_cachep, MSDOS_I(inode));
 }
 
+static void fat_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, fat_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct msdos_inode_info *ei = (struct msdos_inode_info *)foo;
@@ -743,7 +750,7 @@ static struct dentry *fat_fh_to_dentry(struct super_block *sb,
 	 */
 	result = d_obtain_alias(inode);
 	if (!IS_ERR(result))
-		result->d_op = sb->s_root->d_op;
+		d_set_d_op(result, sb->s_root->d_op);
 	return result;
 }
 
@@ -793,7 +800,7 @@ static struct dentry *fat_get_parent(struct dentry *child)
 
 	parent = d_obtain_alias(inode);
 	if (!IS_ERR(parent))
-		parent->d_op = sb->s_root->d_op;
+		d_set_d_op(parent, sb->s_root->d_op);
 out:
 	unlock_super(sb);
 
diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c
index 3345aabd1dd..35ffe43afa4 100644
--- a/fs/fat/namei_msdos.c
+++ b/fs/fat/namei_msdos.c
@@ -148,7 +148,8 @@ static int msdos_find(struct inode *dir, const unsigned char *name, int len,
  * that the existing dentry can be used. The msdos fs routines will
  * return ENOENT or EINVAL as appropriate.
  */
-static int msdos_hash(struct dentry *dentry, struct qstr *qstr)
+static int msdos_hash(const struct dentry *dentry, const struct inode *inode,
+	       struct qstr *qstr)
 {
 	struct fat_mount_options *options = &MSDOS_SB(dentry->d_sb)->options;
 	unsigned char msdos_name[MSDOS_NAME];
@@ -164,16 +165,18 @@ static int msdos_hash(struct dentry *dentry, struct qstr *qstr)
  * Compare two msdos names. If either of the names are invalid,
  * we fall back to doing the standard name comparison.
  */
-static int msdos_cmp(struct dentry *dentry, struct qstr *a, struct qstr *b)
+static int msdos_cmp(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	struct fat_mount_options *options = &MSDOS_SB(dentry->d_sb)->options;
+	struct fat_mount_options *options = &MSDOS_SB(parent->d_sb)->options;
 	unsigned char a_msdos_name[MSDOS_NAME], b_msdos_name[MSDOS_NAME];
 	int error;
 
-	error = msdos_format_name(a->name, a->len, a_msdos_name, options);
+	error = msdos_format_name(name->name, name->len, a_msdos_name, options);
 	if (error)
 		goto old_compare;
-	error = msdos_format_name(b->name, b->len, b_msdos_name, options);
+	error = msdos_format_name(str, len, b_msdos_name, options);
 	if (error)
 		goto old_compare;
 	error = memcmp(a_msdos_name, b_msdos_name, MSDOS_NAME);
@@ -182,8 +185,8 @@ out:
 
 old_compare:
 	error = 1;
-	if (a->len == b->len)
-		error = memcmp(a->name, b->name, a->len);
+	if (name->len == len)
+		error = memcmp(name->name, str, len);
 	goto out;
 }
 
@@ -224,10 +227,10 @@ static struct dentry *msdos_lookup(struct inode *dir, struct dentry *dentry,
 	}
 out:
 	unlock_super(sb);
-	dentry->d_op = &msdos_dentry_operations;
+	d_set_d_op(dentry, &msdos_dentry_operations);
 	dentry = d_splice_alias(inode, dentry);
 	if (dentry)
-		dentry->d_op = &msdos_dentry_operations;
+		d_set_d_op(dentry, &msdos_dentry_operations);
 	return dentry;
 
 error:
@@ -670,7 +673,7 @@ static int msdos_fill_super(struct super_block *sb, void *data, int silent)
 	}
 
 	sb->s_flags |= MS_NOATIME;
-	sb->s_root->d_op = &msdos_dentry_operations;
+	d_set_d_op(sb->s_root, &msdos_dentry_operations);
 	unlock_super(sb);
 	return 0;
 }
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index b936703b892..e3ffc5e1233 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -43,6 +43,9 @@ static int vfat_revalidate_shortname(struct dentry *dentry)
 
 static int vfat_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
 	/* This is not negative dentry. Always valid. */
 	if (dentry->d_inode)
 		return 1;
@@ -51,6 +54,9 @@ static int vfat_revalidate(struct dentry *dentry, struct nameidata *nd)
 
 static int vfat_revalidate_ci(struct dentry *dentry, struct nameidata *nd)
 {
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
 	/*
 	 * This is not negative dentry. Always valid.
 	 *
@@ -85,22 +91,26 @@ static int vfat_revalidate_ci(struct dentry *dentry, struct nameidata *nd)
 }
 
 /* returns the length of a struct qstr, ignoring trailing dots */
-static unsigned int vfat_striptail_len(struct qstr *qstr)
+static unsigned int __vfat_striptail_len(unsigned int len, const char *name)
 {
-	unsigned int len = qstr->len;
-
-	while (len && qstr->name[len - 1] == '.')
+	while (len && name[len - 1] == '.')
 		len--;
 	return len;
 }
 
+static unsigned int vfat_striptail_len(const struct qstr *qstr)
+{
+	return __vfat_striptail_len(qstr->len, qstr->name);
+}
+
 /*
  * Compute the hash for the vfat name corresponding to the dentry.
  * Note: if the name is invalid, we leave the hash code unchanged so
  * that the existing dentry can be used. The vfat fs routines will
  * return ENOENT or EINVAL as appropriate.
  */
-static int vfat_hash(struct dentry *dentry, struct qstr *qstr)
+static int vfat_hash(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *qstr)
 {
 	qstr->hash = full_name_hash(qstr->name, vfat_striptail_len(qstr));
 	return 0;
@@ -112,9 +122,10 @@ static int vfat_hash(struct dentry *dentry, struct qstr *qstr)
  * that the existing dentry can be used. The vfat fs routines will
  * return ENOENT or EINVAL as appropriate.
  */
-static int vfat_hashi(struct dentry *dentry, struct qstr *qstr)
+static int vfat_hashi(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *qstr)
 {
-	struct nls_table *t = MSDOS_SB(dentry->d_inode->i_sb)->nls_io;
+	struct nls_table *t = MSDOS_SB(dentry->d_sb)->nls_io;
 	const unsigned char *name;
 	unsigned int len;
 	unsigned long hash;
@@ -133,16 +144,18 @@ static int vfat_hashi(struct dentry *dentry, struct qstr *qstr)
 /*
  * Case insensitive compare of two vfat names.
  */
-static int vfat_cmpi(struct dentry *dentry, struct qstr *a, struct qstr *b)
+static int vfat_cmpi(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	struct nls_table *t = MSDOS_SB(dentry->d_inode->i_sb)->nls_io;
+	struct nls_table *t = MSDOS_SB(parent->d_sb)->nls_io;
 	unsigned int alen, blen;
 
 	/* A filename cannot end in '.' or we treat it like it has none */
-	alen = vfat_striptail_len(a);
-	blen = vfat_striptail_len(b);
+	alen = vfat_striptail_len(name);
+	blen = __vfat_striptail_len(len, str);
 	if (alen == blen) {
-		if (nls_strnicmp(t, a->name, b->name, alen) == 0)
+		if (nls_strnicmp(t, name->name, str, alen) == 0)
 			return 0;
 	}
 	return 1;
@@ -151,15 +164,17 @@ static int vfat_cmpi(struct dentry *dentry, struct qstr *a, struct qstr *b)
 /*
  * Case sensitive compare of two vfat names.
  */
-static int vfat_cmp(struct dentry *dentry, struct qstr *a, struct qstr *b)
+static int vfat_cmp(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
 	unsigned int alen, blen;
 
 	/* A filename cannot end in '.' or we treat it like it has none */
-	alen = vfat_striptail_len(a);
-	blen = vfat_striptail_len(b);
+	alen = vfat_striptail_len(name);
+	blen = __vfat_striptail_len(len, str);
 	if (alen == blen) {
-		if (strncmp(a->name, b->name, alen) == 0)
+		if (strncmp(name->name, str, alen) == 0)
 			return 0;
 	}
 	return 1;
@@ -757,11 +772,11 @@ static struct dentry *vfat_lookup(struct inode *dir, struct dentry *dentry,
 
 out:
 	unlock_super(sb);
-	dentry->d_op = sb->s_root->d_op;
+	d_set_d_op(dentry, sb->s_root->d_op);
 	dentry->d_time = dentry->d_parent->d_inode->i_version;
 	dentry = d_splice_alias(inode, dentry);
 	if (dentry) {
-		dentry->d_op = sb->s_root->d_op;
+		d_set_d_op(dentry, sb->s_root->d_op);
 		dentry->d_time = dentry->d_parent->d_inode->i_version;
 	}
 	return dentry;
@@ -1063,9 +1078,9 @@ static int vfat_fill_super(struct super_block *sb, void *data, int silent)
 	}
 
 	if (MSDOS_SB(sb)->options.name_check != 's')
-		sb->s_root->d_op = &vfat_ci_dentry_ops;
+		d_set_d_op(sb->s_root, &vfat_ci_dentry_ops);
 	else
-		sb->s_root->d_op = &vfat_dentry_ops;
+		d_set_d_op(sb->s_root, &vfat_dentry_ops);
 
 	unlock_super(sb);
 	return 0;
diff --git a/fs/filesystems.c b/fs/filesystems.c
index 68ba492d8ee..751d6b255a1 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -115,6 +115,9 @@ int unregister_filesystem(struct file_system_type * fs)
 		tmp = &(*tmp)->next;
 	}
 	write_unlock(&file_systems_lock);
+
+	synchronize_rcu();
+
 	return -EINVAL;
 }
 
diff --git a/fs/freevxfs/vxfs_inode.c b/fs/freevxfs/vxfs_inode.c
index 8c04eac5079..2ba6719ac61 100644
--- a/fs/freevxfs/vxfs_inode.c
+++ b/fs/freevxfs/vxfs_inode.c
@@ -337,6 +337,13 @@ vxfs_iget(struct super_block *sbp, ino_t ino)
 	return ip;
 }
 
+static void vxfs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(vxfs_inode_cachep, inode->i_private);
+}
+
 /**
  * vxfs_evict_inode - remove inode from main memory
  * @ip:		inode to discard.
@@ -350,5 +357,5 @@ vxfs_evict_inode(struct inode *ip)
 {
 	truncate_inode_pages(&ip->i_data, 0);
 	end_writeback(ip);
-	kmem_cache_free(vxfs_inode_cachep, ip->i_private);
+	call_rcu(&ip->i_rcu, vxfs_i_callback);
 }
diff --git a/fs/fs_struct.c b/fs/fs_struct.c
index ed45a9cf5f3..68ca487bedb 100644
--- a/fs/fs_struct.c
+++ b/fs/fs_struct.c
@@ -14,12 +14,14 @@ void set_fs_root(struct fs_struct *fs, struct path *path)
 	struct path old_root;
 
 	spin_lock(&fs->lock);
+	write_seqcount_begin(&fs->seq);
 	old_root = fs->root;
 	fs->root = *path;
-	path_get(path);
+	path_get_long(path);
+	write_seqcount_end(&fs->seq);
 	spin_unlock(&fs->lock);
 	if (old_root.dentry)
-		path_put(&old_root);
+		path_put_long(&old_root);
 }
 
 /*
@@ -31,13 +33,15 @@ void set_fs_pwd(struct fs_struct *fs, struct path *path)
 	struct path old_pwd;
 
 	spin_lock(&fs->lock);
+	write_seqcount_begin(&fs->seq);
 	old_pwd = fs->pwd;
 	fs->pwd = *path;
-	path_get(path);
+	path_get_long(path);
+	write_seqcount_end(&fs->seq);
 	spin_unlock(&fs->lock);
 
 	if (old_pwd.dentry)
-		path_put(&old_pwd);
+		path_put_long(&old_pwd);
 }
 
 void chroot_fs_refs(struct path *old_root, struct path *new_root)
@@ -52,31 +56,33 @@ void chroot_fs_refs(struct path *old_root, struct path *new_root)
 		fs = p->fs;
 		if (fs) {
 			spin_lock(&fs->lock);
+			write_seqcount_begin(&fs->seq);
 			if (fs->root.dentry == old_root->dentry
 			    && fs->root.mnt == old_root->mnt) {
-				path_get(new_root);
+				path_get_long(new_root);
 				fs->root = *new_root;
 				count++;
 			}
 			if (fs->pwd.dentry == old_root->dentry
 			    && fs->pwd.mnt == old_root->mnt) {
-				path_get(new_root);
+				path_get_long(new_root);
 				fs->pwd = *new_root;
 				count++;
 			}
+			write_seqcount_end(&fs->seq);
 			spin_unlock(&fs->lock);
 		}
 		task_unlock(p);
 	} while_each_thread(g, p);
 	read_unlock(&tasklist_lock);
 	while (count--)
-		path_put(old_root);
+		path_put_long(old_root);
 }
 
 void free_fs_struct(struct fs_struct *fs)
 {
-	path_put(&fs->root);
-	path_put(&fs->pwd);
+	path_put_long(&fs->root);
+	path_put_long(&fs->pwd);
 	kmem_cache_free(fs_cachep, fs);
 }
 
@@ -88,8 +94,10 @@ void exit_fs(struct task_struct *tsk)
 		int kill;
 		task_lock(tsk);
 		spin_lock(&fs->lock);
+		write_seqcount_begin(&fs->seq);
 		tsk->fs = NULL;
 		kill = !--fs->users;
+		write_seqcount_end(&fs->seq);
 		spin_unlock(&fs->lock);
 		task_unlock(tsk);
 		if (kill)
@@ -105,8 +113,15 @@ struct fs_struct *copy_fs_struct(struct fs_struct *old)
 		fs->users = 1;
 		fs->in_exec = 0;
 		spin_lock_init(&fs->lock);
+		seqcount_init(&fs->seq);
 		fs->umask = old->umask;
-		get_fs_root_and_pwd(old, &fs->root, &fs->pwd);
+
+		spin_lock(&old->lock);
+		fs->root = old->root;
+		path_get_long(&fs->root);
+		fs->pwd = old->pwd;
+		path_get_long(&fs->pwd);
+		spin_unlock(&old->lock);
 	}
 	return fs;
 }
@@ -144,6 +159,7 @@ EXPORT_SYMBOL(current_umask);
 struct fs_struct init_fs = {
 	.users		= 1,
 	.lock		= __SPIN_LOCK_UNLOCKED(init_fs.lock),
+	.seq		= SEQCNT_ZERO,
 	.umask		= 0022,
 };
 
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index c9627c95482..f738599fd8c 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -156,8 +156,12 @@ u64 fuse_get_attr_version(struct fuse_conn *fc)
  */
 static int fuse_dentry_revalidate(struct dentry *entry, struct nameidata *nd)
 {
-	struct inode *inode = entry->d_inode;
+	struct inode *inode;
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	inode = entry->d_inode;
 	if (inode && is_bad_inode(inode))
 		return 0;
 	else if (fuse_dentry_time(entry) < get_jiffies_64()) {
@@ -347,7 +351,7 @@ static struct dentry *fuse_lookup(struct inode *dir, struct dentry *entry,
 	}
 
 	entry = newent ? newent : entry;
-	entry->d_op = &fuse_dentry_operations;
+	d_set_d_op(entry, &fuse_dentry_operations);
 	if (outarg_valid)
 		fuse_change_entry_timeout(entry, &outarg);
 	else
@@ -981,12 +985,15 @@ static int fuse_access(struct inode *inode, int mask)
  * access request is sent.  Execute permission is still checked
  * locally based on file mode.
  */
-static int fuse_permission(struct inode *inode, int mask)
+static int fuse_permission(struct inode *inode, int mask, unsigned int flags)
 {
 	struct fuse_conn *fc = get_fuse_conn(inode);
 	bool refreshed = false;
 	int err = 0;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	if (!fuse_allow_task(fc, current))
 		return -EACCES;
 
@@ -1001,7 +1008,7 @@ static int fuse_permission(struct inode *inode, int mask)
 	}
 
 	if (fc->flags & FUSE_DEFAULT_PERMISSIONS) {
-		err = generic_permission(inode, mask, NULL);
+		err = generic_permission(inode, mask, flags, NULL);
 
 		/* If permission is denied, try to refresh file
 		   attributes.  This is also needed, because the root
@@ -1009,7 +1016,8 @@ static int fuse_permission(struct inode *inode, int mask)
 		if (err == -EACCES && !refreshed) {
 			err = fuse_do_getattr(inode, NULL, NULL);
 			if (!err)
-				err = generic_permission(inode, mask, NULL);
+				err = generic_permission(inode, mask,
+							flags, NULL);
 		}
 
 		/* Note: the opposite of the above test does not
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index c8224587123..8b984a2cebb 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/module.h>
+#include <linux/compat.h>
 
 static const struct file_operations fuse_direct_io_file_operations;
 
@@ -134,6 +135,7 @@ EXPORT_SYMBOL_GPL(fuse_do_open);
 void fuse_finish_open(struct inode *inode, struct file *file)
 {
 	struct fuse_file *ff = file->private_data;
+	struct fuse_conn *fc = get_fuse_conn(inode);
 
 	if (ff->open_flags & FOPEN_DIRECT_IO)
 		file->f_op = &fuse_direct_io_file_operations;
@@ -141,6 +143,15 @@ void fuse_finish_open(struct inode *inode, struct file *file)
 		invalidate_inode_pages2(inode->i_mapping);
 	if (ff->open_flags & FOPEN_NONSEEKABLE)
 		nonseekable_open(inode, file);
+	if (fc->atomic_o_trunc && (file->f_flags & O_TRUNC)) {
+		struct fuse_inode *fi = get_fuse_inode(inode);
+
+		spin_lock(&fc->lock);
+		fi->attr_version = ++fc->attr_version;
+		i_size_write(inode, 0);
+		spin_unlock(&fc->lock);
+		fuse_invalidate_attr(inode);
+	}
 }
 
 int fuse_open_common(struct inode *inode, struct file *file, bool isdir)
@@ -1618,6 +1629,58 @@ static int fuse_ioctl_copy_user(struct page **pages, struct iovec *iov,
 }
 
 /*
+ * CUSE servers compiled on 32bit broke on 64bit kernels because the
+ * ABI was defined to be 'struct iovec' which is different on 32bit
+ * and 64bit.  Fortunately we can determine which structure the server
+ * used from the size of the reply.
+ */
+static int fuse_copy_ioctl_iovec(struct iovec *dst, void *src,
+				 size_t transferred, unsigned count,
+				 bool is_compat)
+{
+#ifdef CONFIG_COMPAT
+	if (count * sizeof(struct compat_iovec) == transferred) {
+		struct compat_iovec *ciov = src;
+		unsigned i;
+
+		/*
+		 * With this interface a 32bit server cannot support
+		 * non-compat (i.e. ones coming from 64bit apps) ioctl
+		 * requests
+		 */
+		if (!is_compat)
+			return -EINVAL;
+
+		for (i = 0; i < count; i++) {
+			dst[i].iov_base = compat_ptr(ciov[i].iov_base);
+			dst[i].iov_len = ciov[i].iov_len;
+		}
+		return 0;
+	}
+#endif
+
+	if (count * sizeof(struct iovec) != transferred)
+		return -EIO;
+
+	memcpy(dst, src, transferred);
+	return 0;
+}
+
+/* Make sure iov_length() won't overflow */
+static int fuse_verify_ioctl_iov(struct iovec *iov, size_t count)
+{
+	size_t n;
+	u32 max = FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT;
+
+	for (n = 0; n < count; n++) {
+		if (iov->iov_len > (size_t) max)
+			return -ENOMEM;
+		max -= iov->iov_len;
+	}
+	return 0;
+}
+
+/*
  * For ioctls, there is no generic way to determine how much memory
  * needs to be read and/or written.  Furthermore, ioctls are allowed
  * to dereference the passed pointer, so the parameter requires deep
@@ -1798,18 +1861,25 @@ long fuse_do_ioctl(struct file *file, unsigned int cmd, unsigned long arg,
 		    in_iovs + out_iovs > FUSE_IOCTL_MAX_IOV)
 			goto out;
 
-		err = -EIO;
-		if ((in_iovs + out_iovs) * sizeof(struct iovec) != transferred)
-			goto out;
-
-		/* okay, copy in iovs and retry */
 		vaddr = kmap_atomic(pages[0], KM_USER0);
-		memcpy(page_address(iov_page), vaddr, transferred);
+		err = fuse_copy_ioctl_iovec(page_address(iov_page), vaddr,
+					    transferred, in_iovs + out_iovs,
+					    (flags & FUSE_IOCTL_COMPAT) != 0);
 		kunmap_atomic(vaddr, KM_USER0);
+		if (err)
+			goto out;
 
 		in_iov = page_address(iov_page);
 		out_iov = in_iov + in_iovs;
 
+		err = fuse_verify_ioctl_iov(in_iov, in_iovs);
+		if (err)
+			goto out;
+
+		err = fuse_verify_ioctl_iov(out_iov, out_iovs);
+		if (err)
+			goto out;
+
 		goto retry;
 	}
 
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index cfce3ad86a9..a8b31da19b9 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -99,6 +99,13 @@ static struct inode *fuse_alloc_inode(struct super_block *sb)
 	return inode;
 }
 
+static void fuse_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(fuse_inode_cachep, inode);
+}
+
 static void fuse_destroy_inode(struct inode *inode)
 {
 	struct fuse_inode *fi = get_fuse_inode(inode);
@@ -106,7 +113,7 @@ static void fuse_destroy_inode(struct inode *inode)
 	BUG_ON(!list_empty(&fi->queued_writes));
 	if (fi->forget_req)
 		fuse_request_free(fi->forget_req);
-	kmem_cache_free(fuse_inode_cachep, inode);
+	call_rcu(&inode->i_rcu, fuse_i_callback);
 }
 
 void fuse_send_forget(struct fuse_conn *fc, struct fuse_req *req,
@@ -619,7 +626,7 @@ static struct dentry *fuse_get_dentry(struct super_block *sb,
 
 	entry = d_obtain_alias(inode);
 	if (!IS_ERR(entry) && get_node_id(inode) != FUSE_ROOT_ID) {
-		entry->d_op = &fuse_dentry_operations;
+		d_set_d_op(entry, &fuse_dentry_operations);
 		fuse_invalidate_entry_cache(entry);
 	}
 
@@ -721,7 +728,7 @@ static struct dentry *fuse_get_parent(struct dentry *child)
 
 	parent = d_obtain_alias(inode);
 	if (!IS_ERR(parent) && get_node_id(inode) != FUSE_ROOT_ID) {
-		parent->d_op = &fuse_dentry_operations;
+		d_set_d_op(parent, &fuse_dentry_operations);
 		fuse_invalidate_entry_cache(parent);
 	}
 
diff --git a/fs/generic_acl.c b/fs/generic_acl.c
index 6bc9e3a5a69..06c48a89183 100644
--- a/fs/generic_acl.c
+++ b/fs/generic_acl.c
@@ -190,14 +190,20 @@ generic_acl_chmod(struct inode *inode)
 }
 
 int
-generic_check_acl(struct inode *inode, int mask)
+generic_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
-	struct posix_acl *acl = get_cached_acl(inode, ACL_TYPE_ACCESS);
-
-	if (acl) {
-		int error = posix_acl_permission(inode, acl, mask);
-		posix_acl_release(acl);
-		return error;
+	if (flags & IPERM_FLAG_RCU) {
+		if (!negative_cached_acl(inode, ACL_TYPE_ACCESS))
+			return -ECHILD;
+	} else {
+		struct posix_acl *acl;
+
+		acl = get_cached_acl(inode, ACL_TYPE_ACCESS);
+		if (acl) {
+			int error = posix_acl_permission(inode, acl, mask);
+			posix_acl_release(acl);
+			return error;
+		}
 	}
 	return -EAGAIN;
 }
diff --git a/fs/gfs2/acl.c b/fs/gfs2/acl.c
index 48171f4c943..7118f1a780a 100644
--- a/fs/gfs2/acl.c
+++ b/fs/gfs2/acl.c
@@ -75,11 +75,14 @@ static struct posix_acl *gfs2_acl_get(struct gfs2_inode *ip, int type)
  * Returns: errno
  */
 
-int gfs2_check_acl(struct inode *inode, int mask)
+int gfs2_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
 	struct posix_acl *acl;
 	int error;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	acl = gfs2_acl_get(GFS2_I(inode), ACL_TYPE_ACCESS);
 	if (IS_ERR(acl))
 		return PTR_ERR(acl);
diff --git a/fs/gfs2/acl.h b/fs/gfs2/acl.h
index b522b0cb39e..a93907c8159 100644
--- a/fs/gfs2/acl.h
+++ b/fs/gfs2/acl.h
@@ -16,7 +16,7 @@
 #define GFS2_POSIX_ACL_DEFAULT		"posix_acl_default"
 #define GFS2_ACL_MAX_ENTRIES		25
 
-extern int gfs2_check_acl(struct inode *inode, int mask);
+extern int gfs2_check_acl(struct inode *inode, int mask, unsigned int);
 extern int gfs2_acl_create(struct gfs2_inode *dip, struct inode *inode);
 extern int gfs2_acl_chmod(struct gfs2_inode *ip, struct iattr *attr);
 extern const struct xattr_handler gfs2_xattr_system_handler;
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c
index 5476c066d4e..3c4039d5eef 100644
--- a/fs/gfs2/bmap.c
+++ b/fs/gfs2/bmap.c
@@ -763,7 +763,7 @@ static int do_strip(struct gfs2_inode *ip, struct buffer_head *dibh,
 	int metadata;
 	unsigned int revokes = 0;
 	int x;
-	int error;
+	int error = 0;
 
 	if (!*top)
 		sm->sm_first = 0;
@@ -780,7 +780,11 @@ static int do_strip(struct gfs2_inode *ip, struct buffer_head *dibh,
 	if (metadata)
 		revokes = (height) ? sdp->sd_inptrs : sdp->sd_diptrs;
 
-	error = gfs2_rindex_hold(sdp, &ip->i_alloc->al_ri_gh);
+	if (ip != GFS2_I(sdp->sd_rindex))
+		error = gfs2_rindex_hold(sdp, &ip->i_alloc->al_ri_gh);
+	else if (!sdp->sd_rgrps)
+		error = gfs2_ri_update(ip);
+
 	if (error)
 		return error;
 
@@ -879,7 +883,8 @@ out_rg_gunlock:
 out_rlist:
 	gfs2_rlist_free(&rlist);
 out:
-	gfs2_glock_dq_uninit(&ip->i_alloc->al_ri_gh);
+	if (ip != GFS2_I(sdp->sd_rindex))
+		gfs2_glock_dq_uninit(&ip->i_alloc->al_ri_gh);
 	return error;
 }
 
diff --git a/fs/gfs2/dentry.c b/fs/gfs2/dentry.c
index 6798755b385..4a456338b87 100644
--- a/fs/gfs2/dentry.c
+++ b/fs/gfs2/dentry.c
@@ -11,6 +11,7 @@
 #include <linux/completion.h>
 #include <linux/buffer_head.h>
 #include <linux/gfs2_ondisk.h>
+#include <linux/namei.h>
 #include <linux/crc32.h>
 
 #include "gfs2.h"
@@ -34,15 +35,23 @@
 
 static int gfs2_drevalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct dentry *parent = dget_parent(dentry);
-	struct gfs2_sbd *sdp = GFS2_SB(parent->d_inode);
-	struct gfs2_inode *dip = GFS2_I(parent->d_inode);
-	struct inode *inode = dentry->d_inode;
+	struct dentry *parent;
+	struct gfs2_sbd *sdp;
+	struct gfs2_inode *dip;
+	struct inode *inode;
 	struct gfs2_holder d_gh;
 	struct gfs2_inode *ip = NULL;
 	int error;
 	int had_lock = 0;
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	parent = dget_parent(dentry);
+	sdp = GFS2_SB(parent->d_inode);
+	dip = GFS2_I(parent->d_inode);
+	inode = dentry->d_inode;
+
 	if (inode) {
 		if (is_bad_inode(inode))
 			goto invalid;
@@ -100,13 +109,14 @@ fail:
 	return 0;
 }
 
-static int gfs2_dhash(struct dentry *dentry, struct qstr *str)
+static int gfs2_dhash(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *str)
 {
 	str->hash = gfs2_disk_hash(str->name, str->len);
 	return 0;
 }
 
-static int gfs2_dentry_delete(struct dentry *dentry)
+static int gfs2_dentry_delete(const struct dentry *dentry)
 {
 	struct gfs2_inode *ginode;
 
diff --git a/fs/gfs2/export.c b/fs/gfs2/export.c
index 06d582732d3..97012ecff56 100644
--- a/fs/gfs2/export.c
+++ b/fs/gfs2/export.c
@@ -130,7 +130,7 @@ static struct dentry *gfs2_get_parent(struct dentry *child)
 
 	dentry = d_obtain_alias(gfs2_lookupi(child->d_inode, &gfs2_qdotdot, 1));
 	if (!IS_ERR(dentry))
-		dentry->d_op = &gfs2_dops;
+		d_set_d_op(dentry, &gfs2_dops);
 	return dentry;
 }
 
@@ -138,10 +138,8 @@ static struct dentry *gfs2_get_dentry(struct super_block *sb,
 				      struct gfs2_inum_host *inum)
 {
 	struct gfs2_sbd *sdp = sb->s_fs_info;
-	struct gfs2_holder i_gh;
 	struct inode *inode;
 	struct dentry *dentry;
-	int error;
 
 	inode = gfs2_ilookup(sb, inum->no_addr);
 	if (inode) {
@@ -152,52 +150,16 @@ static struct dentry *gfs2_get_dentry(struct super_block *sb,
 		goto out_inode;
 	}
 
-	error = gfs2_glock_nq_num(sdp, inum->no_addr, &gfs2_inode_glops,
-				  LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
-	if (error)
-		return ERR_PTR(error);
-
-	error = gfs2_check_blk_type(sdp, inum->no_addr, GFS2_BLKST_DINODE);
-	if (error)
-		goto fail;
-
-	inode = gfs2_inode_lookup(sb, DT_UNKNOWN, inum->no_addr, 0);
-	if (IS_ERR(inode)) {
-		error = PTR_ERR(inode);
-		goto fail;
-	}
-
-	error = gfs2_inode_refresh(GFS2_I(inode));
-	if (error) {
-		iput(inode);
-		goto fail;
-	}
-
-	/* Pick up the works we bypass in gfs2_inode_lookup */
-	if (inode->i_state & I_NEW) 
-		gfs2_set_iop(inode);
-
-	if (GFS2_I(inode)->i_no_formal_ino != inum->no_formal_ino) {
-		iput(inode);
-		goto fail;
-	}
-
-	error = -EIO;
-	if (GFS2_I(inode)->i_diskflags & GFS2_DIF_SYSTEM) {
-		iput(inode);
-		goto fail;
-	}
-
-	gfs2_glock_dq_uninit(&i_gh);
+	inode = gfs2_lookup_by_inum(sdp, inum->no_addr, &inum->no_formal_ino,
+				    GFS2_BLKST_DINODE);
+	if (IS_ERR(inode))
+		return ERR_CAST(inode);
 
 out_inode:
 	dentry = d_obtain_alias(inode);
 	if (!IS_ERR(dentry))
-		dentry->d_op = &gfs2_dops;
+		d_set_d_op(dentry, &gfs2_dops);
 	return dentry;
-fail:
-	gfs2_glock_dq_uninit(&i_gh);
-	return ERR_PTR(error);
 }
 
 static struct dentry *gfs2_fh_to_dentry(struct super_block *sb, struct fid *fid,
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index aa996471ec5..fca6689e12e 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -241,7 +241,7 @@ static int do_gfs2_set_flags(struct file *filp, u32 reqflags, u32 mask)
 	    !capable(CAP_LINUX_IMMUTABLE))
 		goto out;
 	if (!IS_IMMUTABLE(inode)) {
-		error = gfs2_permission(inode, MAY_WRITE);
+		error = gfs2_permission(inode, MAY_WRITE, 0);
 		if (error)
 			goto out;
 	}
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 87778857f09..08a8beb152e 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -541,21 +541,6 @@ out_locked:
 	spin_unlock(&gl->gl_spin);
 }
 
-static unsigned int gfs2_lm_lock(struct gfs2_sbd *sdp, void *lock,
-				 unsigned int req_state,
-				 unsigned int flags)
-{
-	int ret = LM_OUT_ERROR;
-
-	if (!sdp->sd_lockstruct.ls_ops->lm_lock)
-		return req_state == LM_ST_UNLOCKED ? 0 : req_state;
-
-	if (likely(!test_bit(SDF_SHUTDOWN, &sdp->sd_flags)))
-		ret = sdp->sd_lockstruct.ls_ops->lm_lock(lock,
-							 req_state, flags);
-	return ret;
-}
-
 /**
  * do_xmote - Calls the DLM to change the state of a lock
  * @gl: The lock state
@@ -575,13 +560,14 @@ __acquires(&gl->gl_spin)
 
 	lck_flags &= (LM_FLAG_TRY | LM_FLAG_TRY_1CB | LM_FLAG_NOEXP |
 		      LM_FLAG_PRIORITY);
-	BUG_ON(gl->gl_state == target);
-	BUG_ON(gl->gl_state == gl->gl_target);
+	GLOCK_BUG_ON(gl, gl->gl_state == target);
+	GLOCK_BUG_ON(gl, gl->gl_state == gl->gl_target);
 	if ((target == LM_ST_UNLOCKED || target == LM_ST_DEFERRED) &&
 	    glops->go_inval) {
 		set_bit(GLF_INVALIDATE_IN_PROGRESS, &gl->gl_flags);
 		do_error(gl, 0); /* Fail queued try locks */
 	}
+	gl->gl_req = target;
 	spin_unlock(&gl->gl_spin);
 	if (glops->go_xmote_th)
 		glops->go_xmote_th(gl);
@@ -594,15 +580,17 @@ __acquires(&gl->gl_spin)
 	    gl->gl_state == LM_ST_DEFERRED) &&
 	    !(lck_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)))
 		lck_flags |= LM_FLAG_TRY_1CB;
-	ret = gfs2_lm_lock(sdp, gl, target, lck_flags);
 
-	if (!(ret & LM_OUT_ASYNC)) {
-		finish_xmote(gl, ret);
+	if (sdp->sd_lockstruct.ls_ops->lm_lock)	{
+		/* lock_dlm */
+		ret = sdp->sd_lockstruct.ls_ops->lm_lock(gl, target, lck_flags);
+		GLOCK_BUG_ON(gl, ret);
+	} else { /* lock_nolock */
+		finish_xmote(gl, target);
 		if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
 			gfs2_glock_put(gl);
-	} else {
-		GLOCK_BUG_ON(gl, ret != LM_OUT_ASYNC);
 	}
+
 	spin_lock(&gl->gl_spin);
 }
 
@@ -686,21 +674,20 @@ static void delete_work_func(struct work_struct *work)
 {
 	struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
 	struct gfs2_sbd *sdp = gl->gl_sbd;
-	struct gfs2_inode *ip = NULL;
+	struct gfs2_inode *ip;
 	struct inode *inode;
-	u64 no_addr = 0;
+	u64 no_addr = gl->gl_name.ln_number;
+
+	ip = gl->gl_object;
+	/* Note: Unsafe to dereference ip as we don't hold right refs/locks */
 
-	spin_lock(&gl->gl_spin);
-	ip = (struct gfs2_inode *)gl->gl_object;
 	if (ip)
-		no_addr = ip->i_no_addr;
-	spin_unlock(&gl->gl_spin);
-	if (ip) {
 		inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
-		if (inode) {
-			d_prune_aliases(inode);
-			iput(inode);
-		}
+	else
+		inode = gfs2_lookup_by_inum(sdp, no_addr, NULL, GFS2_BLKST_UNLINKED);
+	if (inode && !IS_ERR(inode)) {
+		d_prune_aliases(inode);
+		iput(inode);
 	}
 	gfs2_glock_put(gl);
 }
@@ -952,17 +939,22 @@ int gfs2_glock_wait(struct gfs2_holder *gh)
 
 void gfs2_print_dbg(struct seq_file *seq, const char *fmt, ...)
 {
+	struct va_format vaf;
 	va_list args;
 
 	va_start(args, fmt);
+
 	if (seq) {
 		struct gfs2_glock_iter *gi = seq->private;
 		vsprintf(gi->string, fmt, args);
 		seq_printf(seq, gi->string);
 	} else {
-		printk(KERN_ERR " ");
-		vprintk(fmt, args);
+		vaf.fmt = fmt;
+		vaf.va = &args;
+
+		printk(KERN_ERR " %pV", &vaf);
 	}
+
 	va_end(args);
 }
 
@@ -1362,24 +1354,28 @@ static int gfs2_should_freeze(const struct gfs2_glock *gl)
  * @gl: Pointer to the glock
  * @ret: The return value from the dlm
  *
+ * The gl_reply field is under the gl_spin lock so that it is ok
+ * to use a bitfield shared with other glock state fields.
  */
 
 void gfs2_glock_complete(struct gfs2_glock *gl, int ret)
 {
 	struct lm_lockstruct *ls = &gl->gl_sbd->sd_lockstruct;
 
+	spin_lock(&gl->gl_spin);
 	gl->gl_reply = ret;
 
 	if (unlikely(test_bit(DFL_BLOCK_LOCKS, &ls->ls_flags))) {
-		spin_lock(&gl->gl_spin);
 		if (gfs2_should_freeze(gl)) {
 			set_bit(GLF_FROZEN, &gl->gl_flags);
 			spin_unlock(&gl->gl_spin);
 			return;
 		}
-		spin_unlock(&gl->gl_spin);
 	}
+
+	spin_unlock(&gl->gl_spin);
 	set_bit(GLF_REPLY_PENDING, &gl->gl_flags);
+	smp_wmb();
 	gfs2_glock_hold(gl);
 	if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
 		gfs2_glock_put(gl);
@@ -1627,18 +1623,17 @@ static const char *hflags2str(char *buf, unsigned flags, unsigned long iflags)
 static int dump_holder(struct seq_file *seq, const struct gfs2_holder *gh)
 {
 	struct task_struct *gh_owner = NULL;
-	char buffer[KSYM_SYMBOL_LEN];
 	char flags_buf[32];
 
-	sprint_symbol(buffer, gh->gh_ip);
 	if (gh->gh_owner_pid)
 		gh_owner = pid_task(gh->gh_owner_pid, PIDTYPE_PID);
-	gfs2_print_dbg(seq, " H: s:%s f:%s e:%d p:%ld [%s] %s\n",
-		  state2str(gh->gh_state),
-		  hflags2str(flags_buf, gh->gh_flags, gh->gh_iflags),
-		  gh->gh_error, 
-		  gh->gh_owner_pid ? (long)pid_nr(gh->gh_owner_pid) : -1,
-		  gh_owner ? gh_owner->comm : "(ended)", buffer);
+	gfs2_print_dbg(seq, " H: s:%s f:%s e:%d p:%ld [%s] %pS\n",
+		       state2str(gh->gh_state),
+		       hflags2str(flags_buf, gh->gh_flags, gh->gh_iflags),
+		       gh->gh_error,
+		       gh->gh_owner_pid ? (long)pid_nr(gh->gh_owner_pid) : -1,
+		       gh_owner ? gh_owner->comm : "(ended)",
+		       (void *)gh->gh_ip);
 	return 0;
 }
 
@@ -1783,12 +1778,13 @@ int __init gfs2_glock_init(void)
 	}
 #endif
 
-	glock_workqueue = alloc_workqueue("glock_workqueue", WQ_RESCUER |
+	glock_workqueue = alloc_workqueue("glock_workqueue", WQ_MEM_RECLAIM |
 					  WQ_HIGHPRI | WQ_FREEZEABLE, 0);
 	if (IS_ERR(glock_workqueue))
 		return PTR_ERR(glock_workqueue);
-	gfs2_delete_workqueue = alloc_workqueue("delete_workqueue", WQ_RESCUER |
-						WQ_FREEZEABLE, 0);
+	gfs2_delete_workqueue = alloc_workqueue("delete_workqueue",
+						WQ_MEM_RECLAIM | WQ_FREEZEABLE,
+						0);
 	if (IS_ERR(gfs2_delete_workqueue)) {
 		destroy_workqueue(glock_workqueue);
 		return PTR_ERR(gfs2_delete_workqueue);
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index db1c26d6d22..691851ceb61 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -87,11 +87,10 @@ enum {
 #define GL_ASYNC		0x00000040
 #define GL_EXACT		0x00000080
 #define GL_SKIP			0x00000100
-#define GL_ATIME		0x00000200
 #define GL_NOCACHE		0x00000400
   
 /*
- * lm_lock() and lm_async_cb return flags
+ * lm_async_cb return flags
  *
  * LM_OUT_ST_MASK
  * Masks the lower two bits of lock state in the returned value.
@@ -99,15 +98,11 @@ enum {
  * LM_OUT_CANCELED
  * The lock request was canceled.
  *
- * LM_OUT_ASYNC
- * The result of the request will be returned in an LM_CB_ASYNC callback.
- *
  */
 
 #define LM_OUT_ST_MASK		0x00000003
 #define LM_OUT_CANCELED		0x00000008
-#define LM_OUT_ASYNC		0x00000080
-#define LM_OUT_ERROR		0x00000100
+#define LM_OUT_ERROR		0x00000004
 
 /*
  * lm_recovery_done() messages
@@ -124,25 +119,12 @@ struct lm_lockops {
  	void (*lm_unmount) (struct gfs2_sbd *sdp);
 	void (*lm_withdraw) (struct gfs2_sbd *sdp);
 	void (*lm_put_lock) (struct kmem_cache *cachep, struct gfs2_glock *gl);
-	unsigned int (*lm_lock) (struct gfs2_glock *gl,
-				 unsigned int req_state, unsigned int flags);
+	int (*lm_lock) (struct gfs2_glock *gl, unsigned int req_state,
+			unsigned int flags);
 	void (*lm_cancel) (struct gfs2_glock *gl);
 	const match_table_t *lm_tokens;
 };
 
-#define LM_FLAG_TRY		0x00000001
-#define LM_FLAG_TRY_1CB		0x00000002
-#define LM_FLAG_NOEXP		0x00000004
-#define LM_FLAG_ANY		0x00000008
-#define LM_FLAG_PRIORITY	0x00000010
-
-#define GL_ASYNC		0x00000040
-#define GL_EXACT		0x00000080
-#define GL_SKIP			0x00000100
-#define GL_NOCACHE		0x00000400
-
-#define GLR_TRYFAILED		13
-
 extern struct workqueue_struct *gfs2_delete_workqueue;
 static inline struct gfs2_holder *gfs2_glock_is_locked_by_me(struct gfs2_glock *gl)
 {
@@ -212,6 +194,8 @@ int gfs2_glock_nq_num(struct gfs2_sbd *sdp,
 int gfs2_glock_nq_m(unsigned int num_gh, struct gfs2_holder *ghs);
 void gfs2_glock_dq_m(unsigned int num_gh, struct gfs2_holder *ghs);
 void gfs2_glock_dq_uninit_m(unsigned int num_gh, struct gfs2_holder *ghs);
+
+__attribute__ ((format(printf, 2, 3)))
 void gfs2_print_dbg(struct seq_file *seq, const char *fmt, ...);
 
 /**
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index 0d149dcc04e..263561bf1a5 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -325,7 +325,6 @@ static void trans_go_sync(struct gfs2_glock *gl)
 
 	if (gl->gl_state != LM_ST_UNLOCKED &&
 	    test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) {
-		flush_workqueue(gfs2_delete_workqueue);
 		gfs2_meta_syncfs(sdp);
 		gfs2_log_shutdown(sdp);
 	}
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 764fbb49efc..8d3d2b4a0a7 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -207,12 +207,14 @@ struct gfs2_glock {
 
 	spinlock_t gl_spin;
 
-	unsigned int gl_state;
-	unsigned int gl_target;
-	unsigned int gl_reply;
+	/* State fields protected by gl_spin */
+	unsigned int gl_state:2,	/* Current state */
+		     gl_target:2,	/* Target state */
+		     gl_demote_state:2,	/* State requested by remote node */
+		     gl_req:2,		/* State in last dlm request */
+		     gl_reply:8;	/* Last reply from the dlm */
+
 	unsigned int gl_hash;
-	unsigned int gl_req;
-	unsigned int gl_demote_state; /* state requested by remote node */
 	unsigned long gl_demote_time; /* time of first demote request */
 	struct list_head gl_holders;
 
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 06370f8bd8c..2232b3c780b 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -73,49 +73,6 @@ static struct inode *gfs2_iget(struct super_block *sb, u64 no_addr)
 	return iget5_locked(sb, hash, iget_test, iget_set, &no_addr);
 }
 
-struct gfs2_skip_data {
-	u64	no_addr;
-	int	skipped;
-};
-
-static int iget_skip_test(struct inode *inode, void *opaque)
-{
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_skip_data *data = opaque;
-
-	if (ip->i_no_addr == data->no_addr) {
-		if (inode->i_state & (I_FREEING|I_WILL_FREE)){
-			data->skipped = 1;
-			return 0;
-		}
-		return 1;
-	}
-	return 0;
-}
-
-static int iget_skip_set(struct inode *inode, void *opaque)
-{
-	struct gfs2_inode *ip = GFS2_I(inode);
-	struct gfs2_skip_data *data = opaque;
-
-	if (data->skipped)
-		return 1;
-	inode->i_ino = (unsigned long)(data->no_addr);
-	ip->i_no_addr = data->no_addr;
-	return 0;
-}
-
-static struct inode *gfs2_iget_skip(struct super_block *sb,
-				    u64 no_addr)
-{
-	struct gfs2_skip_data data;
-	unsigned long hash = (unsigned long)no_addr;
-
-	data.no_addr = no_addr;
-	data.skipped = 0;
-	return iget5_locked(sb, hash, iget_skip_test, iget_skip_set, &data);
-}
-
 /**
  * GFS2 lookup code fills in vfs inode contents based on info obtained
  * from directory entry inside gfs2_inode_lookup(). This has caused issues
@@ -243,93 +200,54 @@ fail:
 	return ERR_PTR(error);
 }
 
-/**
- * gfs2_process_unlinked_inode - Lookup an unlinked inode for reclamation
- *                               and try to reclaim it by doing iput.
- *
- * This function assumes no rgrp locks are currently held.
- *
- * @sb: The super block
- * no_addr: The inode number
- *
- */
-
-void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr)
+struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
+				  u64 *no_formal_ino, unsigned int blktype)
 {
-	struct gfs2_sbd *sdp;
-	struct gfs2_inode *ip;
-	struct gfs2_glock *io_gl = NULL;
-	int error;
-	struct gfs2_holder gh;
+	struct super_block *sb = sdp->sd_vfs;
+	struct gfs2_holder i_gh;
 	struct inode *inode;
+	int error;
 
-	inode = gfs2_iget_skip(sb, no_addr);
-
-	if (!inode)
-		return;
-
-	/* If it's not a new inode, someone's using it, so leave it alone. */
-	if (!(inode->i_state & I_NEW)) {
-		iput(inode);
-		return;
-	}
-
-	ip = GFS2_I(inode);
-	sdp = GFS2_SB(inode);
-	ip->i_no_formal_ino = -1;
+	error = gfs2_glock_nq_num(sdp, no_addr, &gfs2_inode_glops,
+				  LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
+	if (error)
+		return ERR_PTR(error);
 
-	error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &ip->i_gl);
-	if (unlikely(error))
+	error = gfs2_check_blk_type(sdp, no_addr, blktype);
+	if (error)
 		goto fail;
-	ip->i_gl->gl_object = ip;
-
-	error = gfs2_glock_get(sdp, no_addr, &gfs2_iopen_glops, CREATE, &io_gl);
-	if (unlikely(error))
-		goto fail_put;
 
-	set_bit(GIF_INVALID, &ip->i_flags);
-	error = gfs2_glock_nq_init(io_gl, LM_ST_SHARED, LM_FLAG_TRY | GL_EXACT,
-				   &ip->i_iopen_gh);
-	if (unlikely(error))
-		goto fail_iopen;
+	inode = gfs2_inode_lookup(sb, DT_UNKNOWN, no_addr, 0);
+	if (IS_ERR(inode))
+		goto fail;
 
-	ip->i_iopen_gh.gh_gl->gl_object = ip;
-	gfs2_glock_put(io_gl);
-	io_gl = NULL;
+	error = gfs2_inode_refresh(GFS2_I(inode));
+	if (error)
+		goto fail_iput;
 
-	inode->i_mode = DT2IF(DT_UNKNOWN);
+	/* Pick up the works we bypass in gfs2_inode_lookup */
+	if (inode->i_state & I_NEW) 
+		gfs2_set_iop(inode);
 
-	/*
-	 * We must read the inode in order to work out its type in
-	 * this case. Note that this doesn't happen often as we normally
-	 * know the type beforehand. This code path only occurs during
-	 * unlinked inode recovery (where it is safe to do this glock,
-	 * which is not true in the general case).
-	 */
-	error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, LM_FLAG_TRY,
-				   &gh);
-	if (unlikely(error))
-		goto fail_glock;
+	/* Two extra checks for NFS only */
+	if (no_formal_ino) {
+		error = -ESTALE;
+		if (GFS2_I(inode)->i_no_formal_ino != *no_formal_ino)
+			goto fail_iput;
 
-	/* Inode is now uptodate */
-	gfs2_glock_dq_uninit(&gh);
-	gfs2_set_iop(inode);
+		error = -EIO;
+		if (GFS2_I(inode)->i_diskflags & GFS2_DIF_SYSTEM)
+			goto fail_iput;
 
-	/* The iput will cause it to be deleted. */
-	iput(inode);
-	return;
+		error = 0;
+	}
 
-fail_glock:
-	gfs2_glock_dq(&ip->i_iopen_gh);
-fail_iopen:
-	if (io_gl)
-		gfs2_glock_put(io_gl);
-fail_put:
-	ip->i_gl->gl_object = NULL;
-	gfs2_glock_put(ip->i_gl);
 fail:
-	iget_failed(inode);
-	return;
+	gfs2_glock_dq_uninit(&i_gh);
+	return error ? ERR_PTR(error) : inode;
+fail_iput:
+	iput(inode);
+	goto fail;
 }
 
 static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf)
@@ -591,7 +509,7 @@ struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
 	}
 
 	if (!is_root) {
-		error = gfs2_permission(dir, MAY_EXEC);
+		error = gfs2_permission(dir, MAY_EXEC, 0);
 		if (error)
 			goto out;
 	}
@@ -621,7 +539,7 @@ static int create_ok(struct gfs2_inode *dip, const struct qstr *name,
 {
 	int error;
 
-	error = gfs2_permission(&dip->i_inode, MAY_WRITE | MAY_EXEC);
+	error = gfs2_permission(&dip->i_inode, MAY_WRITE | MAY_EXEC, 0);
 	if (error)
 		return error;
 
@@ -998,17 +916,8 @@ static int __gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr)
 	if (error)
 		return error;
 
-	if ((attr->ia_valid & ATTR_SIZE) &&
-	    attr->ia_size != i_size_read(inode)) {
-		error = vmtruncate(inode, attr->ia_size);
-		if (error)
-			return error;
-	}
-
 	setattr_copy(inode, attr);
 	mark_inode_dirty(inode);
-
-	gfs2_assert_warn(GFS2_SB(inode), !error);
 	gfs2_trans_add_bh(ip->i_gl, dibh, 1);
 	gfs2_dinode_out(ip, dibh->b_data);
 	brelse(dibh);
diff --git a/fs/gfs2/inode.h b/fs/gfs2/inode.h
index 6720d7d5fbc..732a183efdb 100644
--- a/fs/gfs2/inode.h
+++ b/fs/gfs2/inode.h
@@ -99,7 +99,9 @@ err:
 extern void gfs2_set_iop(struct inode *inode);
 extern struct inode *gfs2_inode_lookup(struct super_block *sb, unsigned type, 
 				       u64 no_addr, u64 no_formal_ino);
-extern void gfs2_process_unlinked_inode(struct super_block *sb, u64 no_addr);
+extern struct inode *gfs2_lookup_by_inum(struct gfs2_sbd *sdp, u64 no_addr,
+					 u64 *no_formal_ino,
+					 unsigned int blktype);
 extern struct inode *gfs2_ilookup(struct super_block *sb, u64 no_addr);
 
 extern int gfs2_inode_refresh(struct gfs2_inode *ip);
@@ -111,7 +113,7 @@ extern struct inode *gfs2_lookupi(struct inode *dir, const struct qstr *name,
 extern struct inode *gfs2_createi(struct gfs2_holder *ghs,
 				  const struct qstr *name,
 				  unsigned int mode, dev_t dev);
-extern int gfs2_permission(struct inode *inode, int mask);
+extern int gfs2_permission(struct inode *inode, int mask, unsigned int flags);
 extern int gfs2_setattr_simple(struct gfs2_inode *ip, struct iattr *attr);
 extern struct inode *gfs2_lookup_simple(struct inode *dip, const char *name);
 extern void gfs2_dinode_out(const struct gfs2_inode *ip, void *buf);
diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c
index 1c09425b45f..6e493aee28f 100644
--- a/fs/gfs2/lock_dlm.c
+++ b/fs/gfs2/lock_dlm.c
@@ -146,15 +146,13 @@ static u32 make_flags(const u32 lkid, const unsigned int gfs_flags,
 	return lkf;
 }
 
-static unsigned int gdlm_lock(struct gfs2_glock *gl,
-			      unsigned int req_state, unsigned int flags)
+static int gdlm_lock(struct gfs2_glock *gl, unsigned int req_state,
+		     unsigned int flags)
 {
 	struct lm_lockstruct *ls = &gl->gl_sbd->sd_lockstruct;
-	int error;
 	int req;
 	u32 lkf;
 
-	gl->gl_req = req_state;
 	req = make_mode(req_state);
 	lkf = make_flags(gl->gl_lksb.sb_lkid, flags, req);
 
@@ -162,13 +160,8 @@ static unsigned int gdlm_lock(struct gfs2_glock *gl,
 	 * Submit the actual lock request.
 	 */
 
-	error = dlm_lock(ls->ls_dlm, req, &gl->gl_lksb, lkf, gl->gl_strname,
-			 GDLM_STRNAME_BYTES - 1, 0, gdlm_ast, gl, gdlm_bast);
-	if (error == -EAGAIN)
-		return 0;
-	if (error)
-		return LM_OUT_ERROR;
-	return LM_OUT_ASYNC;
+	return dlm_lock(ls->ls_dlm, req, &gl->gl_lksb, lkf, gl->gl_strname,
+			GDLM_STRNAME_BYTES - 1, 0, gdlm_ast, gl, gdlm_bast);
 }
 
 static void gdlm_put_lock(struct kmem_cache *cachep, struct gfs2_glock *gl)
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 3eb1393f7b8..2aeabd4218c 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -440,7 +440,7 @@ static int gfs2_lookup_root(struct super_block *sb, struct dentry **dptr,
 		iput(inode);
 		return -ENOMEM;
 	}
-	dentry->d_op = &gfs2_dops;
+	d_set_d_op(dentry, &gfs2_dops);
 	*dptr = dentry;
 	return 0;
 }
diff --git a/fs/gfs2/ops_inode.c b/fs/gfs2/ops_inode.c
index 12cbea7502c..1501db4f0e6 100644
--- a/fs/gfs2/ops_inode.c
+++ b/fs/gfs2/ops_inode.c
@@ -106,7 +106,7 @@ static struct dentry *gfs2_lookup(struct inode *dir, struct dentry *dentry,
 {
 	struct inode *inode = NULL;
 
-	dentry->d_op = &gfs2_dops;
+	d_set_d_op(dentry, &gfs2_dops);
 
 	inode = gfs2_lookupi(dir, &dentry->d_name, 0);
 	if (inode && IS_ERR(inode))
@@ -166,7 +166,7 @@ static int gfs2_link(struct dentry *old_dentry, struct inode *dir,
 	if (error)
 		goto out_child;
 
-	error = gfs2_permission(dir, MAY_WRITE | MAY_EXEC);
+	error = gfs2_permission(dir, MAY_WRITE | MAY_EXEC, 0);
 	if (error)
 		goto out_gunlock;
 
@@ -289,7 +289,7 @@ static int gfs2_unlink_ok(struct gfs2_inode *dip, const struct qstr *name,
 	if (IS_APPEND(&dip->i_inode))
 		return -EPERM;
 
-	error = gfs2_permission(&dip->i_inode, MAY_WRITE | MAY_EXEC);
+	error = gfs2_permission(&dip->i_inode, MAY_WRITE | MAY_EXEC, 0);
 	if (error)
 		return error;
 
@@ -822,7 +822,7 @@ static int gfs2_rename(struct inode *odir, struct dentry *odentry,
 			}
 		}
 	} else {
-		error = gfs2_permission(ndir, MAY_WRITE | MAY_EXEC);
+		error = gfs2_permission(ndir, MAY_WRITE | MAY_EXEC, 0);
 		if (error)
 			goto out_gunlock;
 
@@ -857,7 +857,7 @@ static int gfs2_rename(struct inode *odir, struct dentry *odentry,
 	/* Check out the dir to be renamed */
 
 	if (dir_rename) {
-		error = gfs2_permission(odentry->d_inode, MAY_WRITE);
+		error = gfs2_permission(odentry->d_inode, MAY_WRITE, 0);
 		if (error)
 			goto out_gunlock;
 	}
@@ -1041,13 +1041,17 @@ static void gfs2_put_link(struct dentry *dentry, struct nameidata *nd, void *p)
  * Returns: errno
  */
 
-int gfs2_permission(struct inode *inode, int mask)
+int gfs2_permission(struct inode *inode, int mask, unsigned int flags)
 {
-	struct gfs2_inode *ip = GFS2_I(inode);
+	struct gfs2_inode *ip;
 	struct gfs2_holder i_gh;
 	int error;
 	int unlock = 0;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
+	ip = GFS2_I(inode);
 	if (gfs2_glock_is_locked_by_me(ip->i_gl) == NULL) {
 		error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
 		if (error)
@@ -1058,7 +1062,7 @@ int gfs2_permission(struct inode *inode, int mask)
 	if ((mask & MAY_WRITE) && IS_IMMUTABLE(inode))
 		error = -EACCES;
 	else
-		error = generic_permission(inode, mask, gfs2_check_acl);
+		error = generic_permission(inode, mask, flags, gfs2_check_acl);
 	if (unlock)
 		gfs2_glock_dq_uninit(&i_gh);
 
@@ -1069,7 +1073,6 @@ static int setattr_chown(struct inode *inode, struct iattr *attr)
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
-	struct buffer_head *dibh;
 	u32 ouid, ogid, nuid, ngid;
 	int error;
 
@@ -1100,25 +1103,10 @@ static int setattr_chown(struct inode *inode, struct iattr *attr)
 	if (error)
 		goto out_gunlock_q;
 
-	error = gfs2_meta_inode_buffer(ip, &dibh);
+	error = gfs2_setattr_simple(ip, attr);
 	if (error)
 		goto out_end_trans;
 
-	if ((attr->ia_valid & ATTR_SIZE) &&
-	    attr->ia_size != i_size_read(inode)) {
-		int error;
-
-		error = vmtruncate(inode, attr->ia_size);
-		gfs2_assert_warn(sdp, !error);
-	}
-
-	setattr_copy(inode, attr);
-	mark_inode_dirty(inode);
-
-	gfs2_trans_add_bh(ip->i_gl, dibh, 1);
-	gfs2_dinode_out(ip, dibh->b_data);
-	brelse(dibh);
-
 	if (ouid != NO_QUOTA_CHANGE || ogid != NO_QUOTA_CHANGE) {
 		u64 blocks = gfs2_get_inode_blocks(&ip->i_inode);
 		gfs2_quota_change(ip, -blocks, ouid, ogid);
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 58a9b9998b4..a689901963d 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -631,6 +631,7 @@ static int gfs2_adjust_quota(struct gfs2_inode *ip, loff_t loc,
 			     struct fs_disk_quota *fdq)
 {
 	struct inode *inode = &ip->i_inode;
+	struct gfs2_sbd *sdp = GFS2_SB(inode);
 	struct address_space *mapping = inode->i_mapping;
 	unsigned long index = loc >> PAGE_CACHE_SHIFT;
 	unsigned offset = loc & (PAGE_CACHE_SIZE - 1);
@@ -658,13 +659,17 @@ static int gfs2_adjust_quota(struct gfs2_inode *ip, loff_t loc,
 	qd->qd_qb.qb_value = qp->qu_value;
 	if (fdq) {
 		if (fdq->d_fieldmask & FS_DQ_BSOFT) {
-			qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit);
+			qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit >> sdp->sd_fsb2bb_shift);
 			qd->qd_qb.qb_warn = qp->qu_warn;
 		}
 		if (fdq->d_fieldmask & FS_DQ_BHARD) {
-			qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit);
+			qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit >> sdp->sd_fsb2bb_shift);
 			qd->qd_qb.qb_limit = qp->qu_limit;
 		}
+		if (fdq->d_fieldmask & FS_DQ_BCOUNT) {
+			qp->qu_value = cpu_to_be64(fdq->d_bcount >> sdp->sd_fsb2bb_shift);
+			qd->qd_qb.qb_value = qp->qu_value;
+		}
 	}
 
 	/* Write the quota into the quota file on disk */
@@ -1497,9 +1502,9 @@ static int gfs2_get_dqblk(struct super_block *sb, int type, qid_t id,
 	fdq->d_version = FS_DQUOT_VERSION;
 	fdq->d_flags = (type == QUOTA_USER) ? FS_USER_QUOTA : FS_GROUP_QUOTA;
 	fdq->d_id = id;
-	fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit);
-	fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn);
-	fdq->d_bcount = be64_to_cpu(qlvb->qb_value);
+	fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit) << sdp->sd_fsb2bb_shift;
+	fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn) << sdp->sd_fsb2bb_shift;
+	fdq->d_bcount = be64_to_cpu(qlvb->qb_value) << sdp->sd_fsb2bb_shift;
 
 	gfs2_glock_dq_uninit(&q_gh);
 out:
@@ -1508,7 +1513,7 @@ out:
 }
 
 /* GFS2 only supports a subset of the XFS fields */
-#define GFS2_FIELDMASK (FS_DQ_BSOFT|FS_DQ_BHARD)
+#define GFS2_FIELDMASK (FS_DQ_BSOFT|FS_DQ_BHARD|FS_DQ_BCOUNT)
 
 static int gfs2_set_dqblk(struct super_block *sb, int type, qid_t id,
 			  struct fs_disk_quota *fdq)
@@ -1566,11 +1571,17 @@ static int gfs2_set_dqblk(struct super_block *sb, int type, qid_t id,
 
 	/* If nothing has changed, this is a no-op */
 	if ((fdq->d_fieldmask & FS_DQ_BSOFT) &&
-	    (fdq->d_blk_softlimit == be64_to_cpu(qd->qd_qb.qb_warn)))
+	    ((fdq->d_blk_softlimit >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_warn)))
 		fdq->d_fieldmask ^= FS_DQ_BSOFT;
+
 	if ((fdq->d_fieldmask & FS_DQ_BHARD) &&
-	    (fdq->d_blk_hardlimit == be64_to_cpu(qd->qd_qb.qb_limit)))
+	    ((fdq->d_blk_hardlimit >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_limit)))
 		fdq->d_fieldmask ^= FS_DQ_BHARD;
+
+	if ((fdq->d_fieldmask & FS_DQ_BCOUNT) &&
+	    ((fdq->d_bcount >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_value)))
+		fdq->d_fieldmask ^= FS_DQ_BCOUNT;
+
 	if (fdq->d_fieldmask == 0)
 		goto out_i;
 
@@ -1619,4 +1630,3 @@ const struct quotactl_ops gfs2_quotactl_ops = {
 	.get_dqblk	= gfs2_get_dqblk,
 	.set_dqblk	= gfs2_set_dqblk,
 };
-
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index bef3ab6cf5c..7293ea27020 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -500,7 +500,7 @@ u64 gfs2_ri_total(struct gfs2_sbd *sdp)
 	for (rgrps = 0;; rgrps++) {
 		loff_t pos = rgrps * sizeof(struct gfs2_rindex);
 
-		if (pos + sizeof(struct gfs2_rindex) >= i_size_read(inode))
+		if (pos + sizeof(struct gfs2_rindex) > i_size_read(inode))
 			break;
 		error = gfs2_internal_read(ip, &ra_state, buf, &pos,
 					   sizeof(struct gfs2_rindex));
@@ -583,7 +583,7 @@ static int read_rindex_entry(struct gfs2_inode *ip,
  * Returns: 0 on successful update, error code otherwise
  */
 
-static int gfs2_ri_update(struct gfs2_inode *ip)
+int gfs2_ri_update(struct gfs2_inode *ip)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct inode *inode = &ip->i_inode;
@@ -614,46 +614,6 @@ static int gfs2_ri_update(struct gfs2_inode *ip)
 }
 
 /**
- * gfs2_ri_update_special - Pull in a new resource index from the disk
- *
- * This is a special version that's safe to call from gfs2_inplace_reserve_i.
- * In this case we know that we don't have any resource groups in memory yet.
- *
- * @ip: pointer to the rindex inode
- *
- * Returns: 0 on successful update, error code otherwise
- */
-static int gfs2_ri_update_special(struct gfs2_inode *ip)
-{
-	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
-	struct inode *inode = &ip->i_inode;
-	struct file_ra_state ra_state;
-	struct gfs2_rgrpd *rgd;
-	unsigned int max_data = 0;
-	int error;
-
-	file_ra_state_init(&ra_state, inode->i_mapping);
-	for (sdp->sd_rgrps = 0;; sdp->sd_rgrps++) {
-		/* Ignore partials */
-		if ((sdp->sd_rgrps + 1) * sizeof(struct gfs2_rindex) >
-		    i_size_read(inode))
-			break;
-		error = read_rindex_entry(ip, &ra_state);
-		if (error) {
-			clear_rgrpdi(sdp);
-			return error;
-		}
-	}
-	list_for_each_entry(rgd, &sdp->sd_rindex_list, rd_list)
-		if (rgd->rd_data > max_data)
-			max_data = rgd->rd_data;
-	sdp->sd_max_rg_data = max_data;
-
-	sdp->sd_rindex_uptodate = 1;
-	return 0;
-}
-
-/**
  * gfs2_rindex_hold - Grab a lock on the rindex
  * @sdp: The GFS2 superblock
  * @ri_gh: the glock holder
@@ -963,17 +923,18 @@ static int try_rgrp_fit(struct gfs2_rgrpd *rgd, struct gfs2_alloc *al)
  *          The inode, if one has been found, in inode.
  */
 
-static u64 try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
-			   u64 skip)
+static void try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked, u64 skip)
 {
 	u32 goal = 0, block;
 	u64 no_addr;
 	struct gfs2_sbd *sdp = rgd->rd_sbd;
 	unsigned int n;
+	struct gfs2_glock *gl;
+	struct gfs2_inode *ip;
+	int error;
+	int found = 0;
 
-	for(;;) {
-		if (goal >= rgd->rd_data)
-			break;
+	while (goal < rgd->rd_data) {
 		down_write(&sdp->sd_log_flush_lock);
 		n = 1;
 		block = rgblk_search(rgd, goal, GFS2_BLKST_UNLINKED,
@@ -990,11 +951,32 @@ static u64 try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
 		if (no_addr == skip)
 			continue;
 		*last_unlinked = no_addr;
-		return no_addr;
+
+		error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &gl);
+		if (error)
+			continue;
+
+		/* If the inode is already in cache, we can ignore it here
+		 * because the existing inode disposal code will deal with
+		 * it when all refs have gone away. Accessing gl_object like
+		 * this is not safe in general. Here it is ok because we do
+		 * not dereference the pointer, and we only need an approx
+		 * answer to whether it is NULL or not.
+		 */
+		ip = gl->gl_object;
+
+		if (ip || queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
+			gfs2_glock_put(gl);
+		else
+			found++;
+
+		/* Limit reclaim to sensible number of tasks */
+		if (found > 2*NR_CPUS)
+			return;
 	}
 
 	rgd->rd_flags &= ~GFS2_RDF_CHECK;
-	return 0;
+	return;
 }
 
 /**
@@ -1075,11 +1057,9 @@ static void forward_rgrp_set(struct gfs2_sbd *sdp, struct gfs2_rgrpd *rgd)
  * Try to acquire rgrp in way which avoids contending with others.
  *
  * Returns: errno
- *          unlinked: the block address of an unlinked block to be reclaimed
  */
 
-static int get_local_rgrp(struct gfs2_inode *ip, u64 *unlinked,
-			  u64 *last_unlinked)
+static int get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked)
 {
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct gfs2_rgrpd *rgd, *begin = NULL;
@@ -1089,7 +1069,6 @@ static int get_local_rgrp(struct gfs2_inode *ip, u64 *unlinked,
 	int loops = 0;
 	int error, rg_locked;
 
-	*unlinked = 0;
 	rgd = gfs2_blk2rgrpd(sdp, ip->i_goal);
 
 	while (rgd) {
@@ -1106,17 +1085,10 @@ static int get_local_rgrp(struct gfs2_inode *ip, u64 *unlinked,
 		case 0:
 			if (try_rgrp_fit(rgd, al))
 				goto out;
-			/* If the rg came in already locked, there's no
-			   way we can recover from a failed try_rgrp_unlink
-			   because that would require an iput which can only
-			   happen after the rgrp is unlocked. */
-			if (!rg_locked && rgd->rd_flags & GFS2_RDF_CHECK)
-				*unlinked = try_rgrp_unlink(rgd, last_unlinked,
-							   ip->i_no_addr);
+			if (rgd->rd_flags & GFS2_RDF_CHECK)
+				try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
 			if (!rg_locked)
 				gfs2_glock_dq_uninit(&al->al_rgd_gh);
-			if (*unlinked)
-				return -EAGAIN;
 			/* fall through */
 		case GLR_TRYFAILED:
 			rgd = recent_rgrp_next(rgd);
@@ -1145,13 +1117,10 @@ static int get_local_rgrp(struct gfs2_inode *ip, u64 *unlinked,
 		case 0:
 			if (try_rgrp_fit(rgd, al))
 				goto out;
-			if (!rg_locked && rgd->rd_flags & GFS2_RDF_CHECK)
-				*unlinked = try_rgrp_unlink(rgd, last_unlinked,
-							    ip->i_no_addr);
+			if (rgd->rd_flags & GFS2_RDF_CHECK)
+				try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
 			if (!rg_locked)
 				gfs2_glock_dq_uninit(&al->al_rgd_gh);
-			if (*unlinked)
-				return -EAGAIN;
 			break;
 
 		case GLR_TRYFAILED:
@@ -1204,12 +1173,12 @@ int gfs2_inplace_reserve_i(struct gfs2_inode *ip, int hold_rindex,
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct gfs2_alloc *al = ip->i_alloc;
 	int error = 0;
-	u64 last_unlinked = NO_BLOCK, unlinked;
+	u64 last_unlinked = NO_BLOCK;
+	int tries = 0;
 
 	if (gfs2_assert_warn(sdp, al->al_requested))
 		return -EINVAL;
 
-try_again:
 	if (hold_rindex) {
 		/* We need to hold the rindex unless the inode we're using is
 		   the rindex itself, in which case it's already held. */
@@ -1217,32 +1186,33 @@ try_again:
 			error = gfs2_rindex_hold(sdp, &al->al_ri_gh);
 		else if (!sdp->sd_rgrps) /* We may not have the rindex read
 					    in, so: */
-			error = gfs2_ri_update_special(ip);
+			error = gfs2_ri_update(ip);
+		if (error)
+			return error;
 	}
 
-	if (error)
-		return error;
+try_again:
+	do {
+		error = get_local_rgrp(ip, &last_unlinked);
+		/* If there is no space, flushing the log may release some */
+		if (error) {
+			if (ip == GFS2_I(sdp->sd_rindex) &&
+			    !sdp->sd_rindex_uptodate) {
+				error = gfs2_ri_update(ip);
+				if (error)
+					return error;
+				goto try_again;
+			}
+			gfs2_log_flush(sdp, NULL);
+		}
+	} while (error && tries++ < 3);
 
-	/* Find an rgrp suitable for allocation.  If it encounters any unlinked
-	   dinodes along the way, error will equal -EAGAIN and unlinked will
-	   contains it block address. We then need to look up that inode and
-	   try to free it, and try the allocation again. */
-	error = get_local_rgrp(ip, &unlinked, &last_unlinked);
 	if (error) {
 		if (hold_rindex && ip != GFS2_I(sdp->sd_rindex))
 			gfs2_glock_dq_uninit(&al->al_ri_gh);
-		if (error != -EAGAIN)
-			return error;
-
-		gfs2_process_unlinked_inode(ip->i_inode.i_sb, unlinked);
-		/* regardless of whether or not gfs2_process_unlinked_inode
-		   was successful, we don't want to repeat it again. */
-		last_unlinked = unlinked;
-		gfs2_log_flush(sdp, NULL);
-		error = 0;
-
-		goto try_again;
+		return error;
 	}
+
 	/* no error, so we have the rgrp set in the inode's allocation. */
 	al->al_file = file;
 	al->al_line = line;
diff --git a/fs/gfs2/rgrp.h b/fs/gfs2/rgrp.h
index 0e35c0466f9..50c2bb04369 100644
--- a/fs/gfs2/rgrp.h
+++ b/fs/gfs2/rgrp.h
@@ -48,6 +48,7 @@ extern int gfs2_inplace_reserve_i(struct gfs2_inode *ip, int hold_rindex,
 
 extern void gfs2_inplace_release(struct gfs2_inode *ip);
 
+extern int gfs2_ri_update(struct gfs2_inode *ip);
 extern int gfs2_alloc_block(struct gfs2_inode *ip, u64 *bn, unsigned int *n);
 extern int gfs2_alloc_di(struct gfs2_inode *ip, u64 *bn, u64 *generation);
 
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 2b2c4997430..16c2ecac7eb 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -1405,11 +1405,18 @@ static struct inode *gfs2_alloc_inode(struct super_block *sb)
 	return &ip->i_inode;
 }
 
-static void gfs2_destroy_inode(struct inode *inode)
+static void gfs2_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(gfs2_inode_cachep, inode);
 }
 
+static void gfs2_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, gfs2_i_callback);
+}
+
 const struct super_operations gfs2_super_ops = {
 	.alloc_inode		= gfs2_alloc_inode,
 	.destroy_inode		= gfs2_destroy_inode,
diff --git a/fs/gfs2/xattr.c b/fs/gfs2/xattr.c
index 30b58f07c8a..439b61c0326 100644
--- a/fs/gfs2/xattr.c
+++ b/fs/gfs2/xattr.c
@@ -1296,10 +1296,8 @@ fail:
 
 int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data)
 {
-	struct inode *inode = &ip->i_inode;
 	struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
 	struct gfs2_ea_location el;
-	struct buffer_head *dibh;
 	int error;
 
 	error = gfs2_ea_find(ip, GFS2_EATYPE_SYS, GFS2_POSIX_ACL_ACCESS, &el);
@@ -1321,26 +1319,7 @@ int gfs2_xattr_acl_chmod(struct gfs2_inode *ip, struct iattr *attr, char *data)
 	if (error)
 		return error;
 
-	error = gfs2_meta_inode_buffer(ip, &dibh);
-	if (error)
-		goto out_trans_end;
-
-	if ((attr->ia_valid & ATTR_SIZE) &&
-	    attr->ia_size != i_size_read(inode)) {
-		int error;
-
-		error = vmtruncate(inode, attr->ia_size);
-		gfs2_assert_warn(GFS2_SB(inode), !error);
-	}
-
-	setattr_copy(inode, attr);
-	mark_inode_dirty(inode);
-
-	gfs2_trans_add_bh(ip->i_gl, dibh, 1);
-	gfs2_dinode_out(ip, dibh->b_data);
-	brelse(dibh);
-
-out_trans_end:
+	error = gfs2_setattr_simple(ip, attr);
 	gfs2_trans_end(sdp);
 	return error;
 }
diff --git a/fs/hfs/dir.c b/fs/hfs/dir.c
index 2b3b8611b41..ea4aefe7c65 100644
--- a/fs/hfs/dir.c
+++ b/fs/hfs/dir.c
@@ -25,7 +25,7 @@ static struct dentry *hfs_lookup(struct inode *dir, struct dentry *dentry,
 	struct inode *inode = NULL;
 	int res;
 
-	dentry->d_op = &hfs_dentry_operations;
+	d_set_d_op(dentry, &hfs_dentry_operations);
 
 	hfs_find_init(HFS_SB(dir->i_sb)->cat_tree, &fd);
 	hfs_cat_build_key(dir->i_sb, fd.search_key, dir->i_ino, &dentry->d_name);
diff --git a/fs/hfs/hfs_fs.h b/fs/hfs/hfs_fs.h
index c8cffb81e84..ad97c2d5828 100644
--- a/fs/hfs/hfs_fs.h
+++ b/fs/hfs/hfs_fs.h
@@ -213,10 +213,14 @@ extern int hfs_part_find(struct super_block *, sector_t *, sector_t *);
 /* string.c */
 extern const struct dentry_operations hfs_dentry_operations;
 
-extern int hfs_hash_dentry(struct dentry *, struct qstr *);
+extern int hfs_hash_dentry(const struct dentry *, const struct inode *,
+		struct qstr *);
 extern int hfs_strcmp(const unsigned char *, unsigned int,
 		      const unsigned char *, unsigned int);
-extern int hfs_compare_dentry(struct dentry *, struct qstr *, struct qstr *);
+extern int hfs_compare_dentry(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name);
 
 /* trans.c */
 extern void hfs_asc2mac(struct super_block *, struct hfs_name *, struct qstr *);
diff --git a/fs/hfs/string.c b/fs/hfs/string.c
index 927a5af7942..495a976a3cc 100644
--- a/fs/hfs/string.c
+++ b/fs/hfs/string.c
@@ -51,7 +51,8 @@ static unsigned char caseorder[256] = {
 /*
  * Hash a string to an integer in a case-independent way
  */
-int hfs_hash_dentry(struct dentry *dentry, struct qstr *this)
+int hfs_hash_dentry(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *this)
 {
 	const unsigned char *name = this->name;
 	unsigned int hash, len = this->len;
@@ -92,21 +93,21 @@ int hfs_strcmp(const unsigned char *s1, unsigned int len1,
  * Test for equality of two strings in the HFS filename character ordering.
  * return 1 on failure and 0 on success
  */
-int hfs_compare_dentry(struct dentry *dentry, struct qstr *s1, struct qstr *s2)
+int hfs_compare_dentry(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
 	const unsigned char *n1, *n2;
-	int len;
 
-	len = s1->len;
 	if (len >= HFS_NAMELEN) {
-		if (s2->len < HFS_NAMELEN)
+		if (name->len < HFS_NAMELEN)
 			return 1;
 		len = HFS_NAMELEN;
-	} else if (len != s2->len)
+	} else if (len != name->len)
 		return 1;
 
-	n1 = s1->name;
-	n2 = s2->name;
+	n1 = str;
+	n2 = name->name;
 	while (len--) {
 		if (caseorder[*n1++] != caseorder[*n2++])
 			return 1;
diff --git a/fs/hfs/super.c b/fs/hfs/super.c
index 4824c27cebb..0bef62aa4f4 100644
--- a/fs/hfs/super.c
+++ b/fs/hfs/super.c
@@ -167,11 +167,18 @@ static struct inode *hfs_alloc_inode(struct super_block *sb)
 	return i ? &i->vfs_inode : NULL;
 }
 
-static void hfs_destroy_inode(struct inode *inode)
+static void hfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(hfs_inode_cachep, HFS_I(inode));
 }
 
+static void hfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, hfs_i_callback);
+}
+
 static const struct super_operations hfs_super_operations = {
 	.alloc_inode	= hfs_alloc_inode,
 	.destroy_inode	= hfs_destroy_inode,
@@ -427,7 +434,7 @@ static int hfs_fill_super(struct super_block *sb, void *data, int silent)
 	if (!sb->s_root)
 		goto bail_iput;
 
-	sb->s_root->d_op = &hfs_dentry_operations;
+	d_set_d_op(sb->s_root, &hfs_dentry_operations);
 
 	/* everything's okay */
 	return 0;
diff --git a/fs/hfs/sysdep.c b/fs/hfs/sysdep.c
index 7478f5c219a..19cf291eb91 100644
--- a/fs/hfs/sysdep.c
+++ b/fs/hfs/sysdep.c
@@ -8,15 +8,20 @@
  * This file contains the code to do various system dependent things.
  */
 
+#include <linux/namei.h>
 #include "hfs_fs.h"
 
 /* dentry case-handling: just lowercase everything */
 
 static int hfs_revalidate_dentry(struct dentry *dentry, struct nameidata *nd)
 {
-	struct inode *inode = dentry->d_inode;
+	struct inode *inode;
 	int diff;
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	inode = dentry->d_inode;
 	if(!inode)
 		return 1;
 
diff --git a/fs/hfsplus/bfind.c b/fs/hfsplus/bfind.c
index d182438c7ae..5d799c13205 100644
--- a/fs/hfsplus/bfind.c
+++ b/fs/hfsplus/bfind.c
@@ -22,7 +22,8 @@ int hfs_find_init(struct hfs_btree *tree, struct hfs_find_data *fd)
 		return -ENOMEM;
 	fd->search_key = ptr;
 	fd->key = ptr + tree->max_key_len + 2;
-	dprint(DBG_BNODE_REFS, "find_init: %d (%p)\n", tree->cnid, __builtin_return_address(0));
+	dprint(DBG_BNODE_REFS, "find_init: %d (%p)\n",
+		tree->cnid, __builtin_return_address(0));
 	mutex_lock(&tree->tree_lock);
 	return 0;
 }
@@ -31,7 +32,8 @@ void hfs_find_exit(struct hfs_find_data *fd)
 {
 	hfs_bnode_put(fd->bnode);
 	kfree(fd->search_key);
-	dprint(DBG_BNODE_REFS, "find_exit: %d (%p)\n", fd->tree->cnid, __builtin_return_address(0));
+	dprint(DBG_BNODE_REFS, "find_exit: %d (%p)\n",
+		fd->tree->cnid, __builtin_return_address(0));
 	mutex_unlock(&fd->tree->tree_lock);
 	fd->tree = NULL;
 }
diff --git a/fs/hfsplus/bitmap.c b/fs/hfsplus/bitmap.c
index ad57f5991eb..1cad80c789c 100644
--- a/fs/hfsplus/bitmap.c
+++ b/fs/hfsplus/bitmap.c
@@ -15,7 +15,8 @@
 
 #define PAGE_CACHE_BITS	(PAGE_CACHE_SIZE * 8)
 
-int hfsplus_block_allocate(struct super_block *sb, u32 size, u32 offset, u32 *max)
+int hfsplus_block_allocate(struct super_block *sb, u32 size,
+		u32 offset, u32 *max)
 {
 	struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
 	struct page *page;
diff --git a/fs/hfsplus/bnode.c b/fs/hfsplus/bnode.c
index 29da6574ba7..1c42cc5b899 100644
--- a/fs/hfsplus/bnode.c
+++ b/fs/hfsplus/bnode.c
@@ -42,7 +42,7 @@ void hfs_bnode_read(struct hfs_bnode *node, void *buf, int off, int len)
 u16 hfs_bnode_read_u16(struct hfs_bnode *node, int off)
 {
 	__be16 data;
-	// optimize later...
+	/* TODO: optimize later... */
 	hfs_bnode_read(node, &data, off, 2);
 	return be16_to_cpu(data);
 }
@@ -50,7 +50,7 @@ u16 hfs_bnode_read_u16(struct hfs_bnode *node, int off)
 u8 hfs_bnode_read_u8(struct hfs_bnode *node, int off)
 {
 	u8 data;
-	// optimize later...
+	/* TODO: optimize later... */
 	hfs_bnode_read(node, &data, off, 1);
 	return data;
 }
@@ -96,7 +96,7 @@ void hfs_bnode_write(struct hfs_bnode *node, void *buf, int off, int len)
 void hfs_bnode_write_u16(struct hfs_bnode *node, int off, u16 data)
 {
 	__be16 v = cpu_to_be16(data);
-	// optimize later...
+	/* TODO: optimize later... */
 	hfs_bnode_write(node, &v, off, 2);
 }
 
@@ -212,7 +212,8 @@ void hfs_bnode_move(struct hfs_bnode *node, int dst, int src, int len)
 				dst_page--;
 			}
 			src -= len;
-			memmove(kmap(*dst_page) + src, kmap(*src_page) + src, len);
+			memmove(kmap(*dst_page) + src,
+				kmap(*src_page) + src, len);
 			kunmap(*src_page);
 			set_page_dirty(*dst_page);
 			kunmap(*dst_page);
@@ -250,14 +251,16 @@ void hfs_bnode_move(struct hfs_bnode *node, int dst, int src, int len)
 
 		if (src == dst) {
 			l = min(len, (int)PAGE_CACHE_SIZE - src);
-			memmove(kmap(*dst_page) + src, kmap(*src_page) + src, l);
+			memmove(kmap(*dst_page) + src,
+				kmap(*src_page) + src, l);
 			kunmap(*src_page);
 			set_page_dirty(*dst_page);
 			kunmap(*dst_page);
 
 			while ((len -= l) != 0) {
 				l = min(len, (int)PAGE_CACHE_SIZE);
-				memmove(kmap(*++dst_page), kmap(*++src_page), l);
+				memmove(kmap(*++dst_page),
+					kmap(*++src_page), l);
 				kunmap(*src_page);
 				set_page_dirty(*dst_page);
 				kunmap(*dst_page);
@@ -268,7 +271,8 @@ void hfs_bnode_move(struct hfs_bnode *node, int dst, int src, int len)
 			do {
 				src_ptr = kmap(*src_page) + src;
 				dst_ptr = kmap(*dst_page) + dst;
-				if (PAGE_CACHE_SIZE - src < PAGE_CACHE_SIZE - dst) {
+				if (PAGE_CACHE_SIZE - src <
+						PAGE_CACHE_SIZE - dst) {
 					l = PAGE_CACHE_SIZE - src;
 					src = 0;
 					dst += l;
@@ -340,7 +344,8 @@ void hfs_bnode_unlink(struct hfs_bnode *node)
 			return;
 		tmp->next = node->next;
 		cnid = cpu_to_be32(tmp->next);
-		hfs_bnode_write(tmp, &cnid, offsetof(struct hfs_bnode_desc, next), 4);
+		hfs_bnode_write(tmp, &cnid,
+			offsetof(struct hfs_bnode_desc, next), 4);
 		hfs_bnode_put(tmp);
 	} else if (node->type == HFS_NODE_LEAF)
 		tree->leaf_head = node->next;
@@ -351,15 +356,15 @@ void hfs_bnode_unlink(struct hfs_bnode *node)
 			return;
 		tmp->prev = node->prev;
 		cnid = cpu_to_be32(tmp->prev);
-		hfs_bnode_write(tmp, &cnid, offsetof(struct hfs_bnode_desc, prev), 4);
+		hfs_bnode_write(tmp, &cnid,
+			offsetof(struct hfs_bnode_desc, prev), 4);
 		hfs_bnode_put(tmp);
 	} else if (node->type == HFS_NODE_LEAF)
 		tree->leaf_tail = node->prev;
 
-	// move down?
-	if (!node->prev && !node->next) {
-		printk(KERN_DEBUG "hfs_btree_del_level\n");
-	}
+	/* move down? */
+	if (!node->prev && !node->next)
+		dprint(DBG_BNODE_MOD, "hfs_btree_del_level\n");
 	if (!node->parent) {
 		tree->root = 0;
 		tree->depth = 0;
@@ -379,16 +384,16 @@ struct hfs_bnode *hfs_bnode_findhash(struct hfs_btree *tree, u32 cnid)
 	struct hfs_bnode *node;
 
 	if (cnid >= tree->node_count) {
-		printk(KERN_ERR "hfs: request for non-existent node %d in B*Tree\n", cnid);
+		printk(KERN_ERR "hfs: request for non-existent node "
+				"%d in B*Tree\n",
+			cnid);
 		return NULL;
 	}
 
 	for (node = tree->node_hash[hfs_bnode_hash(cnid)];
-	     node; node = node->next_hash) {
-		if (node->this == cnid) {
+			node; node = node->next_hash)
+		if (node->this == cnid)
 			return node;
-		}
-	}
 	return NULL;
 }
 
@@ -402,7 +407,9 @@ static struct hfs_bnode *__hfs_bnode_create(struct hfs_btree *tree, u32 cnid)
 	loff_t off;
 
 	if (cnid >= tree->node_count) {
-		printk(KERN_ERR "hfs: request for non-existent node %d in B*Tree\n", cnid);
+		printk(KERN_ERR "hfs: request for non-existent node "
+				"%d in B*Tree\n",
+			cnid);
 		return NULL;
 	}
 
@@ -429,7 +436,8 @@ static struct hfs_bnode *__hfs_bnode_create(struct hfs_btree *tree, u32 cnid)
 	} else {
 		spin_unlock(&tree->hash_lock);
 		kfree(node);
-		wait_event(node2->lock_wq, !test_bit(HFS_BNODE_NEW, &node2->flags));
+		wait_event(node2->lock_wq,
+			!test_bit(HFS_BNODE_NEW, &node2->flags));
 		return node2;
 	}
 	spin_unlock(&tree->hash_lock);
@@ -483,7 +491,8 @@ struct hfs_bnode *hfs_bnode_find(struct hfs_btree *tree, u32 num)
 	if (node) {
 		hfs_bnode_get(node);
 		spin_unlock(&tree->hash_lock);
-		wait_event(node->lock_wq, !test_bit(HFS_BNODE_NEW, &node->flags));
+		wait_event(node->lock_wq,
+			!test_bit(HFS_BNODE_NEW, &node->flags));
 		if (test_bit(HFS_BNODE_ERROR, &node->flags))
 			goto node_error;
 		return node;
@@ -497,7 +506,8 @@ struct hfs_bnode *hfs_bnode_find(struct hfs_btree *tree, u32 num)
 	if (!test_bit(HFS_BNODE_NEW, &node->flags))
 		return node;
 
-	desc = (struct hfs_bnode_desc *)(kmap(node->page[0]) + node->page_offset);
+	desc = (struct hfs_bnode_desc *)(kmap(node->page[0]) +
+			node->page_offset);
 	node->prev = be32_to_cpu(desc->prev);
 	node->next = be32_to_cpu(desc->next);
 	node->num_recs = be16_to_cpu(desc->num_recs);
@@ -556,11 +566,13 @@ node_error:
 
 void hfs_bnode_free(struct hfs_bnode *node)
 {
-	//int i;
+#if 0
+	int i;
 
-	//for (i = 0; i < node->tree->pages_per_bnode; i++)
-	//	if (node->page[i])
-	//		page_cache_release(node->page[i]);
+	for (i = 0; i < node->tree->pages_per_bnode; i++)
+		if (node->page[i])
+			page_cache_release(node->page[i]);
+#endif
 	kfree(node);
 }
 
@@ -607,7 +619,8 @@ void hfs_bnode_get(struct hfs_bnode *node)
 	if (node) {
 		atomic_inc(&node->refcnt);
 		dprint(DBG_BNODE_REFS, "get_node(%d:%d): %d\n",
-		       node->tree->cnid, node->this, atomic_read(&node->refcnt));
+			node->tree->cnid, node->this,
+			atomic_read(&node->refcnt));
 	}
 }
 
@@ -619,7 +632,8 @@ void hfs_bnode_put(struct hfs_bnode *node)
 		int i;
 
 		dprint(DBG_BNODE_REFS, "put_node(%d:%d): %d\n",
-		       node->tree->cnid, node->this, atomic_read(&node->refcnt));
+			node->tree->cnid, node->this,
+			atomic_read(&node->refcnt));
 		BUG_ON(!atomic_read(&node->refcnt));
 		if (!atomic_dec_and_lock(&node->refcnt, &tree->hash_lock))
 			return;
diff --git a/fs/hfsplus/brec.c b/fs/hfsplus/brec.c
index 2f39d05443e..2312de34bd4 100644
--- a/fs/hfsplus/brec.c
+++ b/fs/hfsplus/brec.c
@@ -39,7 +39,8 @@ u16 hfs_brec_keylen(struct hfs_bnode *node, u16 rec)
 	   !(node->tree->attributes & HFS_TREE_VARIDXKEYS)) {
 		retval = node->tree->max_key_len + 2;
 	} else {
-		recoff = hfs_bnode_read_u16(node, node->tree->node_size - (rec + 1) * 2);
+		recoff = hfs_bnode_read_u16(node,
+			node->tree->node_size - (rec + 1) * 2);
 		if (!recoff)
 			return 0;
 
@@ -84,7 +85,8 @@ again:
 	end_rec_off = tree->node_size - (node->num_recs + 1) * 2;
 	end_off = hfs_bnode_read_u16(node, end_rec_off);
 	end_rec_off -= 2;
-	dprint(DBG_BNODE_MOD, "insert_rec: %d, %d, %d, %d\n", rec, size, end_off, end_rec_off);
+	dprint(DBG_BNODE_MOD, "insert_rec: %d, %d, %d, %d\n",
+		rec, size, end_off, end_rec_off);
 	if (size > end_rec_off - end_off) {
 		if (new_node)
 			panic("not enough room!\n");
@@ -99,7 +101,9 @@ again:
 	}
 	node->num_recs++;
 	/* write new last offset */
-	hfs_bnode_write_u16(node, offsetof(struct hfs_bnode_desc, num_recs), node->num_recs);
+	hfs_bnode_write_u16(node,
+		offsetof(struct hfs_bnode_desc, num_recs),
+		node->num_recs);
 	hfs_bnode_write_u16(node, end_rec_off, end_off + size);
 	data_off = end_off;
 	data_rec_off = end_rec_off + 2;
@@ -151,7 +155,8 @@ skip:
 		if (tree->attributes & HFS_TREE_VARIDXKEYS)
 			key_len = be16_to_cpu(fd->search_key->key_len) + 2;
 		else {
-			fd->search_key->key_len = cpu_to_be16(tree->max_key_len);
+			fd->search_key->key_len =
+				cpu_to_be16(tree->max_key_len);
 			key_len = tree->max_key_len + 2;
 		}
 		goto again;
@@ -180,7 +185,8 @@ again:
 		mark_inode_dirty(tree->inode);
 	}
 	hfs_bnode_dump(node);
-	dprint(DBG_BNODE_MOD, "remove_rec: %d, %d\n", fd->record, fd->keylength + fd->entrylength);
+	dprint(DBG_BNODE_MOD, "remove_rec: %d, %d\n",
+		fd->record, fd->keylength + fd->entrylength);
 	if (!--node->num_recs) {
 		hfs_bnode_unlink(node);
 		if (!node->parent)
@@ -194,7 +200,9 @@ again:
 		__hfs_brec_find(node, fd);
 		goto again;
 	}
-	hfs_bnode_write_u16(node, offsetof(struct hfs_bnode_desc, num_recs), node->num_recs);
+	hfs_bnode_write_u16(node,
+		offsetof(struct hfs_bnode_desc, num_recs),
+		node->num_recs);
 
 	if (rec_off == end_off)
 		goto skip;
@@ -364,7 +372,8 @@ again:
 		newkeylen = hfs_bnode_read_u16(node, 14) + 2;
 	else
 		fd->keylength = newkeylen = tree->max_key_len + 2;
-	dprint(DBG_BNODE_MOD, "update_rec: %d, %d, %d\n", rec, fd->keylength, newkeylen);
+	dprint(DBG_BNODE_MOD, "update_rec: %d, %d, %d\n",
+		rec, fd->keylength, newkeylen);
 
 	rec_off = tree->node_size - (rec + 2) * 2;
 	end_rec_off = tree->node_size - (parent->num_recs + 1) * 2;
@@ -375,7 +384,7 @@ again:
 		end_off = hfs_bnode_read_u16(parent, end_rec_off);
 		if (end_rec_off - end_off < diff) {
 
-			printk(KERN_DEBUG "hfs: splitting index node...\n");
+			dprint(DBG_BNODE_MOD, "hfs: splitting index node.\n");
 			fd->bnode = parent;
 			new_node = hfs_bnode_split(fd);
 			if (IS_ERR(new_node))
@@ -383,7 +392,8 @@ again:
 			parent = fd->bnode;
 			rec = fd->record;
 			rec_off = tree->node_size - (rec + 2) * 2;
-			end_rec_off = tree->node_size - (parent->num_recs + 1) * 2;
+			end_rec_off = tree->node_size -
+				(parent->num_recs + 1) * 2;
 		}
 	}
 
diff --git a/fs/hfsplus/btree.c b/fs/hfsplus/btree.c
index 22e4d4e3299..21023d9f8ff 100644
--- a/fs/hfsplus/btree.c
+++ b/fs/hfsplus/btree.c
@@ -51,7 +51,8 @@ struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id)
 		goto free_inode;
 
 	/* Load the header */
-	head = (struct hfs_btree_header_rec *)(kmap(page) + sizeof(struct hfs_bnode_desc));
+	head = (struct hfs_btree_header_rec *)(kmap(page) +
+		sizeof(struct hfs_bnode_desc));
 	tree->root = be32_to_cpu(head->root);
 	tree->leaf_count = be32_to_cpu(head->leaf_count);
 	tree->leaf_head = be32_to_cpu(head->leaf_head);
@@ -115,7 +116,9 @@ struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id)
 
 	tree->node_size_shift = ffs(size) - 1;
 
-	tree->pages_per_bnode = (tree->node_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+	tree->pages_per_bnode =
+		(tree->node_size + PAGE_CACHE_SIZE - 1) >>
+		PAGE_CACHE_SHIFT;
 
 	kunmap(page);
 	page_cache_release(page);
@@ -144,8 +147,10 @@ void hfs_btree_close(struct hfs_btree *tree)
 		while ((node = tree->node_hash[i])) {
 			tree->node_hash[i] = node->next_hash;
 			if (atomic_read(&node->refcnt))
-				printk(KERN_CRIT "hfs: node %d:%d still has %d user(s)!\n",
-					node->tree->cnid, node->this, atomic_read(&node->refcnt));
+				printk(KERN_CRIT "hfs: node %d:%d "
+						"still has %d user(s)!\n",
+					node->tree->cnid, node->this,
+					atomic_read(&node->refcnt));
 			hfs_bnode_free(node);
 			tree->node_hash_cnt--;
 		}
@@ -166,7 +171,8 @@ void hfs_btree_write(struct hfs_btree *tree)
 		return;
 	/* Load the header */
 	page = node->page[0];
-	head = (struct hfs_btree_header_rec *)(kmap(page) + sizeof(struct hfs_bnode_desc));
+	head = (struct hfs_btree_header_rec *)(kmap(page) +
+		sizeof(struct hfs_bnode_desc));
 
 	head->root = cpu_to_be32(tree->root);
 	head->leaf_count = cpu_to_be32(tree->leaf_count);
@@ -272,7 +278,8 @@ struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
 						tree->free_nodes--;
 						mark_inode_dirty(tree->inode);
 						hfs_bnode_put(node);
-						return hfs_bnode_create(tree, idx);
+						return hfs_bnode_create(tree,
+							idx);
 					}
 				}
 			}
@@ -287,7 +294,7 @@ struct hfs_bnode *hfs_bmap_alloc(struct hfs_btree *tree)
 		kunmap(*pagep);
 		nidx = node->next;
 		if (!nidx) {
-			printk(KERN_DEBUG "hfs: create new bmap node...\n");
+			dprint(DBG_BNODE_MOD, "hfs: create new bmap node.\n");
 			next_node = hfs_bmap_new_bmap(node, idx);
 		} else
 			next_node = hfs_bnode_find(tree, nidx);
@@ -329,7 +336,9 @@ void hfs_bmap_free(struct hfs_bnode *node)
 		hfs_bnode_put(node);
 		if (!i) {
 			/* panic */;
-			printk(KERN_CRIT "hfs: unable to free bnode %u. bmap not found!\n", node->this);
+			printk(KERN_CRIT "hfs: unable to free bnode %u. "
+					"bmap not found!\n",
+				node->this);
 			return;
 		}
 		node = hfs_bnode_find(tree, i);
@@ -337,7 +346,9 @@ void hfs_bmap_free(struct hfs_bnode *node)
 			return;
 		if (node->type != HFS_NODE_MAP) {
 			/* panic */;
-			printk(KERN_CRIT "hfs: invalid bmap found! (%u,%d)\n", node->this, node->type);
+			printk(KERN_CRIT "hfs: invalid bmap found! "
+					"(%u,%d)\n",
+				node->this, node->type);
 			hfs_bnode_put(node);
 			return;
 		}
@@ -350,7 +361,9 @@ void hfs_bmap_free(struct hfs_bnode *node)
 	m = 1 << (~nidx & 7);
 	byte = data[off];
 	if (!(byte & m)) {
-		printk(KERN_CRIT "hfs: trying to free free bnode %u(%d)\n", node->this, node->type);
+		printk(KERN_CRIT "hfs: trying to free free bnode "
+				"%u(%d)\n",
+			node->this, node->type);
 		kunmap(page);
 		hfs_bnode_put(node);
 		return;
diff --git a/fs/hfsplus/catalog.c b/fs/hfsplus/catalog.c
index 8af45fc5b05..b4ba1b31933 100644
--- a/fs/hfsplus/catalog.c
+++ b/fs/hfsplus/catalog.c
@@ -91,7 +91,8 @@ void hfsplus_cat_set_perms(struct inode *inode, struct hfsplus_perm *perms)
 		perms->dev = 0;
 }
 
-static int hfsplus_cat_build_record(hfsplus_cat_entry *entry, u32 cnid, struct inode *inode)
+static int hfsplus_cat_build_record(hfsplus_cat_entry *entry,
+		u32 cnid, struct inode *inode)
 {
 	struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb);
 
@@ -128,20 +129,32 @@ static int hfsplus_cat_build_record(hfsplus_cat_entry *entry, u32 cnid, struct i
 		if (cnid == inode->i_ino) {
 			hfsplus_cat_set_perms(inode, &file->permissions);
 			if (S_ISLNK(inode->i_mode)) {
-				file->user_info.fdType = cpu_to_be32(HFSP_SYMLINK_TYPE);
-				file->user_info.fdCreator = cpu_to_be32(HFSP_SYMLINK_CREATOR);
+				file->user_info.fdType =
+					cpu_to_be32(HFSP_SYMLINK_TYPE);
+				file->user_info.fdCreator =
+					cpu_to_be32(HFSP_SYMLINK_CREATOR);
 			} else {
-				file->user_info.fdType = cpu_to_be32(sbi->type);
-				file->user_info.fdCreator = cpu_to_be32(sbi->creator);
+				file->user_info.fdType =
+					cpu_to_be32(sbi->type);
+				file->user_info.fdCreator =
+					cpu_to_be32(sbi->creator);
 			}
-			if ((file->permissions.rootflags | file->permissions.userflags) & HFSPLUS_FLG_IMMUTABLE)
-				file->flags |= cpu_to_be16(HFSPLUS_FILE_LOCKED);
+			if (HFSPLUS_FLG_IMMUTABLE &
+					(file->permissions.rootflags |
+					file->permissions.userflags))
+				file->flags |=
+					cpu_to_be16(HFSPLUS_FILE_LOCKED);
 		} else {
-			file->user_info.fdType = cpu_to_be32(HFSP_HARDLINK_TYPE);
-			file->user_info.fdCreator = cpu_to_be32(HFSP_HFSPLUS_CREATOR);
-			file->user_info.fdFlags = cpu_to_be16(0x100);
-			file->create_date = HFSPLUS_I(sbi->hidden_dir)->create_date;
-			file->permissions.dev = cpu_to_be32(HFSPLUS_I(inode)->linkid);
+			file->user_info.fdType =
+				cpu_to_be32(HFSP_HARDLINK_TYPE);
+			file->user_info.fdCreator =
+				cpu_to_be32(HFSP_HFSPLUS_CREATOR);
+			file->user_info.fdFlags =
+				cpu_to_be16(0x100);
+			file->create_date =
+				HFSPLUS_I(sbi->hidden_dir)->create_date;
+			file->permissions.dev =
+				cpu_to_be32(HFSPLUS_I(inode)->linkid);
 		}
 		return sizeof(*file);
 	}
@@ -182,12 +195,14 @@ int hfsplus_find_cat(struct super_block *sb, u32 cnid,
 		return -EIO;
 	}
 
-	hfsplus_cat_build_key_uni(fd->search_key, be32_to_cpu(tmp.thread.parentID),
-				 &tmp.thread.nodeName);
+	hfsplus_cat_build_key_uni(fd->search_key,
+		be32_to_cpu(tmp.thread.parentID),
+		&tmp.thread.nodeName);
 	return hfs_brec_find(fd);
 }
 
-int hfsplus_create_cat(u32 cnid, struct inode *dir, struct qstr *str, struct inode *inode)
+int hfsplus_create_cat(u32 cnid, struct inode *dir,
+		struct qstr *str, struct inode *inode)
 {
 	struct super_block *sb = dir->i_sb;
 	struct hfs_find_data fd;
@@ -195,13 +210,15 @@ int hfsplus_create_cat(u32 cnid, struct inode *dir, struct qstr *str, struct ino
 	int entry_size;
 	int err;
 
-	dprint(DBG_CAT_MOD, "create_cat: %s,%u(%d)\n", str->name, cnid, inode->i_nlink);
+	dprint(DBG_CAT_MOD, "create_cat: %s,%u(%d)\n",
+		str->name, cnid, inode->i_nlink);
 	hfs_find_init(HFSPLUS_SB(sb)->cat_tree, &fd);
 
 	hfsplus_cat_build_key(sb, fd.search_key, cnid, NULL);
-	entry_size = hfsplus_fill_cat_thread(sb, &entry, S_ISDIR(inode->i_mode) ?
+	entry_size = hfsplus_fill_cat_thread(sb, &entry,
+		S_ISDIR(inode->i_mode) ?
 			HFSPLUS_FOLDER_THREAD : HFSPLUS_FILE_THREAD,
-			dir->i_ino, str);
+		dir->i_ino, str);
 	err = hfs_brec_find(&fd);
 	if (err != -ENOENT) {
 		if (!err)
@@ -227,7 +244,8 @@ int hfsplus_create_cat(u32 cnid, struct inode *dir, struct qstr *str, struct ino
 
 	dir->i_size++;
 	dir->i_mtime = dir->i_ctime = CURRENT_TIME_SEC;
-	mark_inode_dirty(dir);
+	hfsplus_mark_inode_dirty(dir, HFSPLUS_I_CAT_DIRTY);
+
 	hfs_find_exit(&fd);
 	return 0;
 
@@ -249,7 +267,8 @@ int hfsplus_delete_cat(u32 cnid, struct inode *dir, struct qstr *str)
 	int err, off;
 	u16 type;
 
-	dprint(DBG_CAT_MOD, "delete_cat: %s,%u\n", str ? str->name : NULL, cnid);
+	dprint(DBG_CAT_MOD, "delete_cat: %s,%u\n",
+		str ? str->name : NULL, cnid);
 	hfs_find_init(HFSPLUS_SB(sb)->cat_tree, &fd);
 
 	if (!str) {
@@ -260,11 +279,15 @@ int hfsplus_delete_cat(u32 cnid, struct inode *dir, struct qstr *str)
 		if (err)
 			goto out;
 
-		off = fd.entryoffset + offsetof(struct hfsplus_cat_thread, nodeName);
+		off = fd.entryoffset +
+			offsetof(struct hfsplus_cat_thread, nodeName);
 		fd.search_key->cat.parent = cpu_to_be32(dir->i_ino);
-		hfs_bnode_read(fd.bnode, &fd.search_key->cat.name.length, off, 2);
+		hfs_bnode_read(fd.bnode,
+			&fd.search_key->cat.name.length, off, 2);
 		len = be16_to_cpu(fd.search_key->cat.name.length) * 2;
-		hfs_bnode_read(fd.bnode, &fd.search_key->cat.name.unicode, off + 2, len);
+		hfs_bnode_read(fd.bnode,
+			&fd.search_key->cat.name.unicode,
+			off + 2, len);
 		fd.search_key->key_len = cpu_to_be16(6 + len);
 	} else
 		hfsplus_cat_build_key(sb, fd.search_key, dir->i_ino, str);
@@ -281,7 +304,8 @@ int hfsplus_delete_cat(u32 cnid, struct inode *dir, struct qstr *str)
 		hfsplus_free_fork(sb, cnid, &fork, HFSPLUS_TYPE_DATA);
 #endif
 
-		off = fd.entryoffset + offsetof(struct hfsplus_cat_file, rsrc_fork);
+		off = fd.entryoffset +
+			offsetof(struct hfsplus_cat_file, rsrc_fork);
 		hfs_bnode_read(fd.bnode, &fork, off, sizeof(fork));
 		hfsplus_free_fork(sb, cnid, &fork, HFSPLUS_TYPE_RSRC);
 	}
@@ -308,7 +332,7 @@ int hfsplus_delete_cat(u32 cnid, struct inode *dir, struct qstr *str)
 
 	dir->i_size--;
 	dir->i_mtime = dir->i_ctime = CURRENT_TIME_SEC;
-	mark_inode_dirty(dir);
+	hfsplus_mark_inode_dirty(dir, HFSPLUS_I_CAT_DIRTY);
 out:
 	hfs_find_exit(&fd);
 
@@ -325,7 +349,8 @@ int hfsplus_rename_cat(u32 cnid,
 	int entry_size, type;
 	int err = 0;
 
-	dprint(DBG_CAT_MOD, "rename_cat: %u - %lu,%s - %lu,%s\n", cnid, src_dir->i_ino, src_name->name,
+	dprint(DBG_CAT_MOD, "rename_cat: %u - %lu,%s - %lu,%s\n",
+		cnid, src_dir->i_ino, src_name->name,
 		dst_dir->i_ino, dst_name->name);
 	hfs_find_init(HFSPLUS_SB(sb)->cat_tree, &src_fd);
 	dst_fd = src_fd;
@@ -353,7 +378,6 @@ int hfsplus_rename_cat(u32 cnid,
 		goto out;
 	dst_dir->i_size++;
 	dst_dir->i_mtime = dst_dir->i_ctime = CURRENT_TIME_SEC;
-	mark_inode_dirty(dst_dir);
 
 	/* finally remove the old entry */
 	hfsplus_cat_build_key(sb, src_fd.search_key, src_dir->i_ino, src_name);
@@ -365,7 +389,6 @@ int hfsplus_rename_cat(u32 cnid,
 		goto out;
 	src_dir->i_size--;
 	src_dir->i_mtime = src_dir->i_ctime = CURRENT_TIME_SEC;
-	mark_inode_dirty(src_dir);
 
 	/* remove old thread entry */
 	hfsplus_cat_build_key(sb, src_fd.search_key, cnid, NULL);
@@ -379,7 +402,8 @@ int hfsplus_rename_cat(u32 cnid,
 
 	/* create new thread entry */
 	hfsplus_cat_build_key(sb, dst_fd.search_key, cnid, NULL);
-	entry_size = hfsplus_fill_cat_thread(sb, &entry, type, dst_dir->i_ino, dst_name);
+	entry_size = hfsplus_fill_cat_thread(sb, &entry, type,
+		dst_dir->i_ino, dst_name);
 	err = hfs_brec_find(&dst_fd);
 	if (err != -ENOENT) {
 		if (!err)
@@ -387,6 +411,9 @@ int hfsplus_rename_cat(u32 cnid,
 		goto out;
 	}
 	err = hfs_brec_insert(&dst_fd, &entry, entry_size);
+
+	hfsplus_mark_inode_dirty(dst_dir, HFSPLUS_I_CAT_DIRTY);
+	hfsplus_mark_inode_dirty(src_dir, HFSPLUS_I_CAT_DIRTY);
 out:
 	hfs_bnode_put(dst_fd.bnode);
 	hfs_find_exit(&src_fd);
diff --git a/fs/hfsplus/dir.c b/fs/hfsplus/dir.c
index 9d59c0571f5..f896dc84302 100644
--- a/fs/hfsplus/dir.c
+++ b/fs/hfsplus/dir.c
@@ -37,7 +37,7 @@ static struct dentry *hfsplus_lookup(struct inode *dir, struct dentry *dentry,
 
 	sb = dir->i_sb;
 
-	dentry->d_op = &hfsplus_dentry_operations;
+	d_set_d_op(dentry, &hfsplus_dentry_operations);
 	dentry->d_fsdata = NULL;
 	hfs_find_init(HFSPLUS_SB(sb)->cat_tree, &fd);
 	hfsplus_cat_build_key(sb, fd.search_key, dir->i_ino, &dentry->d_name);
@@ -66,11 +66,17 @@ again:
 			goto fail;
 		}
 		cnid = be32_to_cpu(entry.file.id);
-		if (entry.file.user_info.fdType == cpu_to_be32(HFSP_HARDLINK_TYPE) &&
-		    entry.file.user_info.fdCreator == cpu_to_be32(HFSP_HFSPLUS_CREATOR) &&
-		    (entry.file.create_date == HFSPLUS_I(HFSPLUS_SB(sb)->hidden_dir)->create_date ||
-		     entry.file.create_date == HFSPLUS_I(sb->s_root->d_inode)->create_date) &&
-		    HFSPLUS_SB(sb)->hidden_dir) {
+		if (entry.file.user_info.fdType ==
+				cpu_to_be32(HFSP_HARDLINK_TYPE) &&
+				entry.file.user_info.fdCreator ==
+				cpu_to_be32(HFSP_HFSPLUS_CREATOR) &&
+				(entry.file.create_date ==
+					HFSPLUS_I(HFSPLUS_SB(sb)->hidden_dir)->
+						create_date ||
+				entry.file.create_date ==
+					HFSPLUS_I(sb->s_root->d_inode)->
+						create_date) &&
+				HFSPLUS_SB(sb)->hidden_dir) {
 			struct qstr str;
 			char name[32];
 
@@ -83,11 +89,13 @@ again:
 				linkid = 0;
 			} else {
 				dentry->d_fsdata = (void *)(unsigned long)cnid;
-				linkid = be32_to_cpu(entry.file.permissions.dev);
+				linkid =
+					be32_to_cpu(entry.file.permissions.dev);
 				str.len = sprintf(name, "iNode%d", linkid);
 				str.name = name;
 				hfsplus_cat_build_key(sb, fd.search_key,
-					HFSPLUS_SB(sb)->hidden_dir->i_ino, &str);
+					HFSPLUS_SB(sb)->hidden_dir->i_ino,
+					&str);
 				goto again;
 			}
 		} else if (!dentry->d_fsdata)
@@ -139,7 +147,8 @@ static int hfsplus_readdir(struct file *filp, void *dirent, filldir_t filldir)
 		filp->f_pos++;
 		/* fall through */
 	case 1:
-		hfs_bnode_read(fd.bnode, &entry, fd.entryoffset, fd.entrylength);
+		hfs_bnode_read(fd.bnode, &entry, fd.entryoffset,
+			fd.entrylength);
 		if (be16_to_cpu(entry.type) != HFSPLUS_FOLDER_THREAD) {
 			printk(KERN_ERR "hfs: bad catalog folder thread\n");
 			err = -EIO;
@@ -169,14 +178,16 @@ static int hfsplus_readdir(struct file *filp, void *dirent, filldir_t filldir)
 			err = -EIO;
 			goto out;
 		}
-		hfs_bnode_read(fd.bnode, &entry, fd.entryoffset, fd.entrylength);
+		hfs_bnode_read(fd.bnode, &entry, fd.entryoffset,
+			fd.entrylength);
 		type = be16_to_cpu(entry.type);
 		len = HFSPLUS_MAX_STRLEN;
 		err = hfsplus_uni2asc(sb, &fd.key->cat.name, strbuf, &len);
 		if (err)
 			goto out;
 		if (type == HFSPLUS_FOLDER) {
-			if (fd.entrylength < sizeof(struct hfsplus_cat_folder)) {
+			if (fd.entrylength <
+					sizeof(struct hfsplus_cat_folder)) {
 				printk(KERN_ERR "hfs: small dir entry\n");
 				err = -EIO;
 				goto out;
@@ -202,7 +213,7 @@ static int hfsplus_readdir(struct file *filp, void *dirent, filldir_t filldir)
 			err = -EIO;
 			goto out;
 		}
-	next:
+next:
 		filp->f_pos++;
 		if (filp->f_pos >= inode->i_size)
 			goto out;
@@ -273,7 +284,8 @@ static int hfsplus_link(struct dentry *src_dentry, struct inode *dst_dir,
 		HFSPLUS_I(inode)->linkid = id;
 		cnid = sbi->next_cnid++;
 		src_dentry->d_fsdata = (void *)(unsigned long)cnid;
-		res = hfsplus_create_cat(cnid, src_dir, &src_dentry->d_name, inode);
+		res = hfsplus_create_cat(cnid, src_dir,
+			&src_dentry->d_name, inode);
 		if (res)
 			/* panic? */
 			goto out;
@@ -485,6 +497,7 @@ const struct inode_operations hfsplus_dir_inode_operations = {
 };
 
 const struct file_operations hfsplus_dir_operations = {
+	.fsync		= hfsplus_file_fsync,
 	.read		= generic_read_dir,
 	.readdir	= hfsplus_readdir,
 	.unlocked_ioctl = hfsplus_ioctl,
diff --git a/fs/hfsplus/extents.c b/fs/hfsplus/extents.c
index 0c9cb1820a5..52a0bcaa7b6 100644
--- a/fs/hfsplus/extents.c
+++ b/fs/hfsplus/extents.c
@@ -83,7 +83,8 @@ static u32 hfsplus_ext_lastblock(struct hfsplus_extent *ext)
 	return be32_to_cpu(ext->start_block) + be32_to_cpu(ext->block_count);
 }
 
-static void __hfsplus_ext_write_extent(struct inode *inode, struct hfs_find_data *fd)
+static void __hfsplus_ext_write_extent(struct inode *inode,
+		struct hfs_find_data *fd)
 {
 	struct hfsplus_inode_info *hip = HFSPLUS_I(inode);
 	int res;
@@ -95,24 +96,32 @@ static void __hfsplus_ext_write_extent(struct inode *inode, struct hfs_find_data
 				HFSPLUS_TYPE_RSRC : HFSPLUS_TYPE_DATA);
 
 	res = hfs_brec_find(fd);
-	if (hip->flags & HFSPLUS_FLG_EXT_NEW) {
+	if (hip->extent_state & HFSPLUS_EXT_NEW) {
 		if (res != -ENOENT)
 			return;
 		hfs_brec_insert(fd, hip->cached_extents,
 				sizeof(hfsplus_extent_rec));
-		hip->flags &= ~(HFSPLUS_FLG_EXT_DIRTY | HFSPLUS_FLG_EXT_NEW);
+		hip->extent_state &= ~(HFSPLUS_EXT_DIRTY | HFSPLUS_EXT_NEW);
 	} else {
 		if (res)
 			return;
 		hfs_bnode_write(fd->bnode, hip->cached_extents,
 				fd->entryoffset, fd->entrylength);
-		hip->flags &= ~HFSPLUS_FLG_EXT_DIRTY;
+		hip->extent_state &= ~HFSPLUS_EXT_DIRTY;
 	}
+
+	/*
+	 * We can't just use hfsplus_mark_inode_dirty here, because we
+	 * also get called from hfsplus_write_inode, which should not
+	 * redirty the inode.  Instead the callers have to be careful
+	 * to explicily mark the inode dirty, too.
+	 */
+	set_bit(HFSPLUS_I_EXT_DIRTY, &hip->flags);
 }
 
 static void hfsplus_ext_write_extent_locked(struct inode *inode)
 {
-	if (HFSPLUS_I(inode)->flags & HFSPLUS_FLG_EXT_DIRTY) {
+	if (HFSPLUS_I(inode)->extent_state & HFSPLUS_EXT_DIRTY) {
 		struct hfs_find_data fd;
 
 		hfs_find_init(HFSPLUS_SB(inode->i_sb)->ext_tree, &fd);
@@ -144,18 +153,20 @@ static inline int __hfsplus_ext_read_extent(struct hfs_find_data *fd,
 		return -ENOENT;
 	if (fd->entrylength != sizeof(hfsplus_extent_rec))
 		return -EIO;
-	hfs_bnode_read(fd->bnode, extent, fd->entryoffset, sizeof(hfsplus_extent_rec));
+	hfs_bnode_read(fd->bnode, extent, fd->entryoffset,
+		sizeof(hfsplus_extent_rec));
 	return 0;
 }
 
-static inline int __hfsplus_ext_cache_extent(struct hfs_find_data *fd, struct inode *inode, u32 block)
+static inline int __hfsplus_ext_cache_extent(struct hfs_find_data *fd,
+		struct inode *inode, u32 block)
 {
 	struct hfsplus_inode_info *hip = HFSPLUS_I(inode);
 	int res;
 
 	WARN_ON(!mutex_is_locked(&hip->extents_lock));
 
-	if (hip->flags & HFSPLUS_FLG_EXT_DIRTY)
+	if (hip->extent_state & HFSPLUS_EXT_DIRTY)
 		__hfsplus_ext_write_extent(inode, fd);
 
 	res = __hfsplus_ext_read_extent(fd, hip->cached_extents, inode->i_ino,
@@ -164,10 +175,11 @@ static inline int __hfsplus_ext_cache_extent(struct hfs_find_data *fd, struct in
 						HFSPLUS_TYPE_DATA);
 	if (!res) {
 		hip->cached_start = be32_to_cpu(fd->key->ext.start_block);
-		hip->cached_blocks = hfsplus_ext_block_count(hip->cached_extents);
+		hip->cached_blocks =
+			hfsplus_ext_block_count(hip->cached_extents);
 	} else {
 		hip->cached_start = hip->cached_blocks = 0;
-		hip->flags &= ~(HFSPLUS_FLG_EXT_DIRTY | HFSPLUS_FLG_EXT_NEW);
+		hip->extent_state &= ~(HFSPLUS_EXT_DIRTY | HFSPLUS_EXT_NEW);
 	}
 	return res;
 }
@@ -197,6 +209,7 @@ int hfsplus_get_block(struct inode *inode, sector_t iblock,
 	struct hfsplus_inode_info *hip = HFSPLUS_I(inode);
 	int res = -EIO;
 	u32 ablock, dblock, mask;
+	int was_dirty = 0;
 	int shift;
 
 	/* Convert inode block to disk allocation block */
@@ -223,27 +236,37 @@ int hfsplus_get_block(struct inode *inode, sector_t iblock,
 		return -EIO;
 
 	mutex_lock(&hip->extents_lock);
+
+	/*
+	 * hfsplus_ext_read_extent will write out a cached extent into
+	 * the extents btree.  In that case we may have to mark the inode
+	 * dirty even for a pure read of an extent here.
+	 */
+	was_dirty = (hip->extent_state & HFSPLUS_EXT_DIRTY);
 	res = hfsplus_ext_read_extent(inode, ablock);
-	if (!res) {
-		dblock = hfsplus_ext_find_block(hip->cached_extents,
-						ablock - hip->cached_start);
-	} else {
+	if (res) {
 		mutex_unlock(&hip->extents_lock);
 		return -EIO;
 	}
+	dblock = hfsplus_ext_find_block(hip->cached_extents,
+					ablock - hip->cached_start);
 	mutex_unlock(&hip->extents_lock);
 
 done:
-	dprint(DBG_EXTENT, "get_block(%lu): %llu - %u\n", inode->i_ino, (long long)iblock, dblock);
+	dprint(DBG_EXTENT, "get_block(%lu): %llu - %u\n",
+		inode->i_ino, (long long)iblock, dblock);
 	mask = (1 << sbi->fs_shift) - 1;
-	map_bh(bh_result, sb, (dblock << sbi->fs_shift) + sbi->blockoffset + (iblock & mask));
+	map_bh(bh_result, sb,
+		(dblock << sbi->fs_shift) + sbi->blockoffset +
+			(iblock & mask));
 	if (create) {
 		set_buffer_new(bh_result);
 		hip->phys_size += sb->s_blocksize;
 		hip->fs_blocks++;
 		inode_add_bytes(inode, sb->s_blocksize);
-		mark_inode_dirty(inode);
 	}
+	if (create || was_dirty)
+		mark_inode_dirty(inode);
 	return 0;
 }
 
@@ -326,7 +349,8 @@ found:
 	}
 }
 
-int hfsplus_free_fork(struct super_block *sb, u32 cnid, struct hfsplus_fork_raw *fork, int type)
+int hfsplus_free_fork(struct super_block *sb, u32 cnid,
+		struct hfsplus_fork_raw *fork, int type)
 {
 	struct hfs_find_data fd;
 	hfsplus_extent_rec ext_entry;
@@ -373,12 +397,13 @@ int hfsplus_file_extend(struct inode *inode)
 	u32 start, len, goal;
 	int res;
 
-	if (sbi->alloc_file->i_size * 8 <
-	    sbi->total_blocks - sbi->free_blocks + 8) {
-		// extend alloc file
-		printk(KERN_ERR "hfs: extend alloc file! (%Lu,%u,%u)\n",
-				sbi->alloc_file->i_size * 8,
-				sbi->total_blocks, sbi->free_blocks);
+	if (sbi->total_blocks - sbi->free_blocks + 8 >
+			sbi->alloc_file->i_size * 8) {
+		/* extend alloc file */
+		printk(KERN_ERR "hfs: extend alloc file! "
+				"(%llu,%u,%u)\n",
+			sbi->alloc_file->i_size * 8,
+			sbi->total_blocks, sbi->free_blocks);
 		return -ENOSPC;
 	}
 
@@ -429,7 +454,7 @@ int hfsplus_file_extend(struct inode *inode)
 					 start, len);
 		if (!res) {
 			hfsplus_dump_extent(hip->cached_extents);
-			hip->flags |= HFSPLUS_FLG_EXT_DIRTY;
+			hip->extent_state |= HFSPLUS_EXT_DIRTY;
 			hip->cached_blocks += len;
 		} else if (res == -ENOSPC)
 			goto insert_extent;
@@ -438,7 +463,7 @@ out:
 	mutex_unlock(&hip->extents_lock);
 	if (!res) {
 		hip->alloc_blocks += len;
-		mark_inode_dirty(inode);
+		hfsplus_mark_inode_dirty(inode, HFSPLUS_I_ALLOC_DIRTY);
 	}
 	return res;
 
@@ -450,7 +475,7 @@ insert_extent:
 	hip->cached_extents[0].start_block = cpu_to_be32(start);
 	hip->cached_extents[0].block_count = cpu_to_be32(len);
 	hfsplus_dump_extent(hip->cached_extents);
-	hip->flags |= HFSPLUS_FLG_EXT_DIRTY | HFSPLUS_FLG_EXT_NEW;
+	hip->extent_state |= HFSPLUS_EXT_DIRTY | HFSPLUS_EXT_NEW;
 	hip->cached_start = hip->alloc_blocks;
 	hip->cached_blocks = len;
 
@@ -466,8 +491,9 @@ void hfsplus_file_truncate(struct inode *inode)
 	u32 alloc_cnt, blk_cnt, start;
 	int res;
 
-	dprint(DBG_INODE, "truncate: %lu, %Lu -> %Lu\n",
-		inode->i_ino, (long long)hip->phys_size, inode->i_size);
+	dprint(DBG_INODE, "truncate: %lu, %llu -> %llu\n",
+		inode->i_ino, (long long)hip->phys_size,
+		inode->i_size);
 
 	if (inode->i_size > hip->phys_size) {
 		struct address_space *mapping = inode->i_mapping;
@@ -481,7 +507,8 @@ void hfsplus_file_truncate(struct inode *inode)
 						&page, &fsdata);
 		if (res)
 			return;
-		res = pagecache_write_end(NULL, mapping, size, 0, 0, page, fsdata);
+		res = pagecache_write_end(NULL, mapping, size,
+			0, 0, page, fsdata);
 		if (res < 0)
 			return;
 		mark_inode_dirty(inode);
@@ -513,12 +540,12 @@ void hfsplus_file_truncate(struct inode *inode)
 				     alloc_cnt - start, alloc_cnt - blk_cnt);
 		hfsplus_dump_extent(hip->cached_extents);
 		if (blk_cnt > start) {
-			hip->flags |= HFSPLUS_FLG_EXT_DIRTY;
+			hip->extent_state |= HFSPLUS_EXT_DIRTY;
 			break;
 		}
 		alloc_cnt = start;
 		hip->cached_start = hip->cached_blocks = 0;
-		hip->flags &= ~(HFSPLUS_FLG_EXT_DIRTY | HFSPLUS_FLG_EXT_NEW);
+		hip->extent_state &= ~(HFSPLUS_EXT_DIRTY | HFSPLUS_EXT_NEW);
 		hfs_brec_remove(&fd);
 	}
 	hfs_find_exit(&fd);
@@ -527,7 +554,8 @@ void hfsplus_file_truncate(struct inode *inode)
 	hip->alloc_blocks = blk_cnt;
 out:
 	hip->phys_size = inode->i_size;
-	hip->fs_blocks = (inode->i_size + sb->s_blocksize - 1) >> sb->s_blocksize_bits;
+	hip->fs_blocks = (inode->i_size + sb->s_blocksize - 1) >>
+		sb->s_blocksize_bits;
 	inode_set_bytes(inode, hip->fs_blocks << sb->s_blocksize_bits);
-	mark_inode_dirty(inode);
+	hfsplus_mark_inode_dirty(inode, HFSPLUS_I_ALLOC_DIRTY);
 }
diff --git a/fs/hfsplus/hfsplus_fs.h b/fs/hfsplus/hfsplus_fs.h
index cb3653efb57..d6857523336 100644
--- a/fs/hfsplus/hfsplus_fs.h
+++ b/fs/hfsplus/hfsplus_fs.h
@@ -23,13 +23,16 @@
 #define DBG_EXTENT	0x00000020
 #define DBG_BITMAP	0x00000040
 
-//#define DBG_MASK	(DBG_EXTENT|DBG_INODE|DBG_BNODE_MOD)
-//#define DBG_MASK	(DBG_BNODE_MOD|DBG_CAT_MOD|DBG_INODE)
-//#define DBG_MASK	(DBG_CAT_MOD|DBG_BNODE_REFS|DBG_INODE|DBG_EXTENT)
+#if 0
+#define DBG_MASK	(DBG_EXTENT|DBG_INODE|DBG_BNODE_MOD)
+#define DBG_MASK	(DBG_BNODE_MOD|DBG_CAT_MOD|DBG_INODE)
+#define DBG_MASK	(DBG_CAT_MOD|DBG_BNODE_REFS|DBG_INODE|DBG_EXTENT)
+#endif
 #define DBG_MASK	(0)
 
 #define dprint(flg, fmt, args...) \
-	if (flg & DBG_MASK) printk(fmt , ## args)
+	if (flg & DBG_MASK) \
+		printk(fmt , ## args)
 
 /* Runtime config options */
 #define HFSPLUS_DEF_CR_TYPE    0x3F3F3F3F  /* '????' */
@@ -37,7 +40,8 @@
 #define HFSPLUS_TYPE_DATA 0x00
 #define HFSPLUS_TYPE_RSRC 0xFF
 
-typedef int (*btree_keycmp)(const hfsplus_btree_key *, const hfsplus_btree_key *);
+typedef int (*btree_keycmp)(const hfsplus_btree_key *,
+		const hfsplus_btree_key *);
 
 #define NODE_HASH_SIZE	256
 
@@ -61,7 +65,6 @@ struct hfs_btree {
 	unsigned int max_key_len;
 	unsigned int depth;
 
-	//unsigned int map1_size, map_size;
 	struct mutex tree_lock;
 
 	unsigned int pages_per_bnode;
@@ -107,8 +110,8 @@ struct hfsplus_vh;
 struct hfs_btree;
 
 struct hfsplus_sb_info {
-	struct buffer_head *s_vhbh;
 	struct hfsplus_vh *s_vhdr;
+	struct hfsplus_vh *s_backup_vhdr;
 	struct hfs_btree *ext_tree;
 	struct hfs_btree *cat_tree;
 	struct hfs_btree *attr_tree;
@@ -118,7 +121,8 @@ struct hfsplus_sb_info {
 
 	/* Runtime variables */
 	u32 blockoffset;
-	u32 sect_count;
+	sector_t part_start;
+	sector_t sect_count;
 	int fs_shift;
 
 	/* immutable data from the volume header */
@@ -155,6 +159,12 @@ struct hfsplus_sb_info {
 #define HFSPLUS_SB_FORCE	2
 #define HFSPLUS_SB_HFSX		3
 #define HFSPLUS_SB_CASEFOLD	4
+#define HFSPLUS_SB_NOBARRIER	5
+
+static inline struct hfsplus_sb_info *HFSPLUS_SB(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
 
 
 struct hfsplus_inode_info {
@@ -170,7 +180,7 @@ struct hfsplus_inode_info {
 	u32 cached_blocks;
 	hfsplus_extent_rec first_extents;
 	hfsplus_extent_rec cached_extents;
-	unsigned long flags;
+	unsigned int extent_state;
 	struct mutex extents_lock;
 
 	/*
@@ -185,6 +195,11 @@ struct hfsplus_inode_info {
 	u32 linkid;
 
 	/*
+	 * Accessed using atomic bitops.
+	 */
+	unsigned long flags;
+
+	/*
 	 * Protected by i_mutex.
 	 */
 	sector_t fs_blocks;
@@ -195,12 +210,34 @@ struct hfsplus_inode_info {
 	struct inode vfs_inode;
 };
 
-#define HFSPLUS_FLG_RSRC	0x0001
-#define HFSPLUS_FLG_EXT_DIRTY	0x0002
-#define HFSPLUS_FLG_EXT_NEW	0x0004
+#define HFSPLUS_EXT_DIRTY	0x0001
+#define HFSPLUS_EXT_NEW		0x0002
+
+#define HFSPLUS_I_RSRC		0	/* represents a resource fork */
+#define HFSPLUS_I_CAT_DIRTY	1	/* has changes in the catalog tree */
+#define HFSPLUS_I_EXT_DIRTY	2	/* has changes in the extent tree */
+#define HFSPLUS_I_ALLOC_DIRTY	3	/* has changes in the allocation file */
+
+#define HFSPLUS_IS_RSRC(inode) \
+	test_bit(HFSPLUS_I_RSRC, &HFSPLUS_I(inode)->flags)
+
+static inline struct hfsplus_inode_info *HFSPLUS_I(struct inode *inode)
+{
+	return list_entry(inode, struct hfsplus_inode_info, vfs_inode);
+}
 
-#define HFSPLUS_IS_DATA(inode)   (!(HFSPLUS_I(inode)->flags & HFSPLUS_FLG_RSRC))
-#define HFSPLUS_IS_RSRC(inode)   (HFSPLUS_I(inode)->flags & HFSPLUS_FLG_RSRC)
+/*
+ * Mark an inode dirty, and also mark the btree in which the
+ * specific type of metadata is stored.
+ * For data or metadata that gets written back by into the catalog btree
+ * by hfsplus_write_inode a plain mark_inode_dirty call is enough.
+ */
+static inline void hfsplus_mark_inode_dirty(struct inode *inode,
+		unsigned int flag)
+{
+	set_bit(flag, &HFSPLUS_I(inode)->flags);
+	mark_inode_dirty(inode);
+}
 
 struct hfs_find_data {
 	/* filled by caller */
@@ -318,9 +355,12 @@ int hfs_brec_read(struct hfs_find_data *, void *, int);
 int hfs_brec_goto(struct hfs_find_data *, int);
 
 /* catalog.c */
-int hfsplus_cat_case_cmp_key(const hfsplus_btree_key *, const hfsplus_btree_key *);
-int hfsplus_cat_bin_cmp_key(const hfsplus_btree_key *, const hfsplus_btree_key *);
-void hfsplus_cat_build_key(struct super_block *sb, hfsplus_btree_key *, u32, struct qstr *);
+int hfsplus_cat_case_cmp_key(const hfsplus_btree_key *,
+		const hfsplus_btree_key *);
+int hfsplus_cat_bin_cmp_key(const hfsplus_btree_key *,
+		const hfsplus_btree_key *);
+void hfsplus_cat_build_key(struct super_block *sb,
+		hfsplus_btree_key *, u32, struct qstr *);
 int hfsplus_find_cat(struct super_block *, u32, struct hfs_find_data *);
 int hfsplus_create_cat(u32, struct inode *, struct qstr *, struct inode *);
 int hfsplus_delete_cat(u32, struct inode *, struct qstr *);
@@ -336,7 +376,8 @@ extern const struct file_operations hfsplus_dir_operations;
 int hfsplus_ext_cmp_key(const hfsplus_btree_key *, const hfsplus_btree_key *);
 void hfsplus_ext_write_extent(struct inode *);
 int hfsplus_get_block(struct inode *, sector_t, struct buffer_head *, int);
-int hfsplus_free_fork(struct super_block *, u32, struct hfsplus_fork_raw *, int);
+int hfsplus_free_fork(struct super_block *, u32,
+		struct hfsplus_fork_raw *, int);
 int hfsplus_file_extend(struct inode *);
 void hfsplus_file_truncate(struct inode *);
 
@@ -351,6 +392,7 @@ int hfsplus_cat_read_inode(struct inode *, struct hfs_find_data *);
 int hfsplus_cat_write_inode(struct inode *);
 struct inode *hfsplus_new_inode(struct super_block *, int);
 void hfsplus_delete_inode(struct inode *);
+int hfsplus_file_fsync(struct file *file, int datasync);
 
 /* ioctl.c */
 long hfsplus_ioctl(struct file *filp, unsigned int cmd, unsigned long arg);
@@ -362,6 +404,7 @@ ssize_t hfsplus_listxattr(struct dentry *dentry, char *buffer, size_t size);
 
 /* options.c */
 int hfsplus_parse_options(char *, struct hfsplus_sb_info *);
+int hfsplus_parse_options_remount(char *input, int *force);
 void hfsplus_fill_defaults(struct hfsplus_sb_info *);
 int hfsplus_show_options(struct seq_file *, struct vfsmount *);
 
@@ -375,45 +418,26 @@ extern u16 hfsplus_decompose_table[];
 extern u16 hfsplus_compose_table[];
 
 /* unicode.c */
-int hfsplus_strcasecmp(const struct hfsplus_unistr *, const struct hfsplus_unistr *);
-int hfsplus_strcmp(const struct hfsplus_unistr *, const struct hfsplus_unistr *);
-int hfsplus_uni2asc(struct super_block *, const struct hfsplus_unistr *, char *, int *);
-int hfsplus_asc2uni(struct super_block *, struct hfsplus_unistr *, const char *, int);
-int hfsplus_hash_dentry(struct dentry *dentry, struct qstr *str);
-int hfsplus_compare_dentry(struct dentry *dentry, struct qstr *s1, struct qstr *s2);
+int hfsplus_strcasecmp(const struct hfsplus_unistr *,
+		const struct hfsplus_unistr *);
+int hfsplus_strcmp(const struct hfsplus_unistr *,
+		const struct hfsplus_unistr *);
+int hfsplus_uni2asc(struct super_block *,
+		const struct hfsplus_unistr *, char *, int *);
+int hfsplus_asc2uni(struct super_block *,
+		struct hfsplus_unistr *, const char *, int);
+int hfsplus_hash_dentry(const struct dentry *dentry,
+		const struct inode *inode, struct qstr *str);
+int hfsplus_compare_dentry(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name);
 
 /* wrapper.c */
 int hfsplus_read_wrapper(struct super_block *);
-
 int hfs_part_find(struct super_block *, sector_t *, sector_t *);
-
-/* access macros */
-static inline struct hfsplus_sb_info *HFSPLUS_SB(struct super_block *sb)
-{
-	return sb->s_fs_info;
-}
-
-static inline struct hfsplus_inode_info *HFSPLUS_I(struct inode *inode)
-{
-	return list_entry(inode, struct hfsplus_inode_info, vfs_inode);
-}
-
-#define sb_bread512(sb, sec, data) ({			\
-	struct buffer_head *__bh;			\
-	sector_t __block;				\
-	loff_t __start;					\
-	int __offset;					\
-							\
-	__start = (loff_t)(sec) << HFSPLUS_SECTOR_SHIFT;\
-	__block = __start >> (sb)->s_blocksize_bits;	\
-	__offset = __start & ((sb)->s_blocksize - 1);	\
-	__bh = sb_bread((sb), __block);			\
-	if (likely(__bh != NULL))			\
-		data = (void *)(__bh->b_data + __offset);\
-	else						\
-		data = NULL;				\
-	__bh;						\
-})
+int hfsplus_submit_bio(struct block_device *bdev, sector_t sector,
+		void *data, int rw);
 
 /* time macros */
 #define __hfsp_mt2ut(t)		(be32_to_cpu(t) - 2082844800U)
diff --git a/fs/hfsplus/hfsplus_raw.h b/fs/hfsplus/hfsplus_raw.h
index 6892899fd6f..927cdd6d5bf 100644
--- a/fs/hfsplus/hfsplus_raw.h
+++ b/fs/hfsplus/hfsplus_raw.h
@@ -36,7 +36,8 @@
 #define HFSP_WRAPOFF_EMBEDSIG     0x7C
 #define HFSP_WRAPOFF_EMBEDEXT     0x7E
 
-#define HFSP_HIDDENDIR_NAME	"\xe2\x90\x80\xe2\x90\x80\xe2\x90\x80\xe2\x90\x80HFS+ Private Data"
+#define HFSP_HIDDENDIR_NAME \
+	"\xe2\x90\x80\xe2\x90\x80\xe2\x90\x80\xe2\x90\x80HFS+ Private Data"
 
 #define HFSP_HARDLINK_TYPE	0x686c6e6b	/* 'hlnk' */
 #define HFSP_HFSPLUS_CREATOR	0x6866732b	/* 'hfs+' */
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index 8afd7e84f98..a8df651747f 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -8,6 +8,7 @@
  * Inode handling routines
  */
 
+#include <linux/blkdev.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/pagemap.h>
@@ -77,7 +78,8 @@ static int hfsplus_releasepage(struct page *page, gfp_t mask)
 	if (!tree)
 		return 0;
 	if (tree->node_size >= PAGE_CACHE_SIZE) {
-		nidx = page->index >> (tree->node_size_shift - PAGE_CACHE_SHIFT);
+		nidx = page->index >>
+			(tree->node_size_shift - PAGE_CACHE_SHIFT);
 		spin_lock(&tree->hash_lock);
 		node = hfs_bnode_findhash(tree, nidx);
 		if (!node)
@@ -90,7 +92,8 @@ static int hfsplus_releasepage(struct page *page, gfp_t mask)
 		}
 		spin_unlock(&tree->hash_lock);
 	} else {
-		nidx = page->index << (PAGE_CACHE_SHIFT - tree->node_size_shift);
+		nidx = page->index <<
+			(PAGE_CACHE_SHIFT - tree->node_size_shift);
 		i = 1 << (PAGE_CACHE_SHIFT - tree->node_size_shift);
 		spin_lock(&tree->hash_lock);
 		do {
@@ -166,8 +169,8 @@ const struct dentry_operations hfsplus_dentry_operations = {
 	.d_compare    = hfsplus_compare_dentry,
 };
 
-static struct dentry *hfsplus_file_lookup(struct inode *dir, struct dentry *dentry,
-					  struct nameidata *nd)
+static struct dentry *hfsplus_file_lookup(struct inode *dir,
+		struct dentry *dentry, struct nameidata *nd)
 {
 	struct hfs_find_data fd;
 	struct super_block *sb = dir->i_sb;
@@ -190,7 +193,9 @@ static struct dentry *hfsplus_file_lookup(struct inode *dir, struct dentry *dent
 	inode->i_ino = dir->i_ino;
 	INIT_LIST_HEAD(&hip->open_dir_list);
 	mutex_init(&hip->extents_lock);
-	hip->flags = HFSPLUS_FLG_RSRC;
+	hip->extent_state = 0;
+	hip->flags = 0;
+	set_bit(HFSPLUS_I_RSRC, &hip->flags);
 
 	hfs_find_init(HFSPLUS_SB(sb)->cat_tree, &fd);
 	err = hfsplus_find_cat(sb, dir->i_ino, &fd);
@@ -219,7 +224,8 @@ out:
 	return NULL;
 }
 
-static void hfsplus_get_perms(struct inode *inode, struct hfsplus_perm *perms, int dir)
+static void hfsplus_get_perms(struct inode *inode,
+		struct hfsplus_perm *perms, int dir)
 {
 	struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb);
 	u16 mode;
@@ -302,29 +308,41 @@ static int hfsplus_setattr(struct dentry *dentry, struct iattr *attr)
 	return 0;
 }
 
-static int hfsplus_file_fsync(struct file *filp, int datasync)
+int hfsplus_file_fsync(struct file *file, int datasync)
 {
-	struct inode *inode = filp->f_mapping->host;
-	struct super_block * sb;
-	int ret, err;
-
-	/* sync the inode to buffers */
-	ret = write_inode_now(inode, 0);
-
-	/* sync the superblock to buffers */
-	sb = inode->i_sb;
-	if (sb->s_dirt) {
-		if (!(sb->s_flags & MS_RDONLY))
-			hfsplus_sync_fs(sb, 1);
-		else
-			sb->s_dirt = 0;
+	struct inode *inode = file->f_mapping->host;
+	struct hfsplus_inode_info *hip = HFSPLUS_I(inode);
+	struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb);
+	int error = 0, error2;
+
+	/*
+	 * Sync inode metadata into the catalog and extent trees.
+	 */
+	sync_inode_metadata(inode, 1);
+
+	/*
+	 * And explicitly write out the btrees.
+	 */
+	if (test_and_clear_bit(HFSPLUS_I_CAT_DIRTY, &hip->flags))
+		error = filemap_write_and_wait(sbi->cat_tree->inode->i_mapping);
+
+	if (test_and_clear_bit(HFSPLUS_I_EXT_DIRTY, &hip->flags)) {
+		error2 =
+			filemap_write_and_wait(sbi->ext_tree->inode->i_mapping);
+		if (!error)
+			error = error2;
 	}
 
-	/* .. finally sync the buffers to disk */
-	err = sync_blockdev(sb->s_bdev);
-	if (!ret)
-		ret = err;
-	return ret;
+	if (test_and_clear_bit(HFSPLUS_I_ALLOC_DIRTY, &hip->flags)) {
+		error2 = filemap_write_and_wait(sbi->alloc_file->i_mapping);
+		if (!error)
+			error = error2;
+	}
+
+	if (!test_bit(HFSPLUS_SB_NOBARRIER, &sbi->flags))
+		blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL);
+
+	return error;
 }
 
 static const struct inode_operations hfsplus_file_inode_operations = {
@@ -337,7 +355,7 @@ static const struct inode_operations hfsplus_file_inode_operations = {
 };
 
 static const struct file_operations hfsplus_file_operations = {
-	.llseek 	= generic_file_llseek,
+	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
 	.aio_read	= generic_file_aio_read,
 	.write		= do_sync_write,
@@ -370,6 +388,7 @@ struct inode *hfsplus_new_inode(struct super_block *sb, int mode)
 	INIT_LIST_HEAD(&hip->open_dir_list);
 	mutex_init(&hip->extents_lock);
 	atomic_set(&hip->opencnt, 0);
+	hip->extent_state = 0;
 	hip->flags = 0;
 	memset(hip->first_extents, 0, sizeof(hfsplus_extent_rec));
 	memset(hip->cached_extents, 0, sizeof(hfsplus_extent_rec));
@@ -457,7 +476,8 @@ void hfsplus_inode_read_fork(struct inode *inode, struct hfsplus_fork_raw *fork)
 	}
 }
 
-void hfsplus_inode_write_fork(struct inode *inode, struct hfsplus_fork_raw *fork)
+void hfsplus_inode_write_fork(struct inode *inode,
+		struct hfsplus_fork_raw *fork)
 {
 	memcpy(&fork->extents, &HFSPLUS_I(inode)->first_extents,
 	       sizeof(hfsplus_extent_rec));
@@ -499,13 +519,14 @@ int hfsplus_cat_read_inode(struct inode *inode, struct hfs_find_data *fd)
 		hfs_bnode_read(fd->bnode, &entry, fd->entryoffset,
 					sizeof(struct hfsplus_cat_file));
 
-		hfsplus_inode_read_fork(inode, HFSPLUS_IS_DATA(inode) ?
-					&file->data_fork : &file->rsrc_fork);
+		hfsplus_inode_read_fork(inode, HFSPLUS_IS_RSRC(inode) ?
+					&file->rsrc_fork : &file->data_fork);
 		hfsplus_get_perms(inode, &file->permissions, 0);
 		inode->i_nlink = 1;
 		if (S_ISREG(inode->i_mode)) {
 			if (file->permissions.dev)
-				inode->i_nlink = be32_to_cpu(file->permissions.dev);
+				inode->i_nlink =
+					be32_to_cpu(file->permissions.dev);
 			inode->i_op = &hfsplus_file_inode_operations;
 			inode->i_fop = &hfsplus_file_operations;
 			inode->i_mapping->a_ops = &hfsplus_aops;
@@ -578,7 +599,9 @@ int hfsplus_cat_write_inode(struct inode *inode)
 					sizeof(struct hfsplus_cat_file));
 		hfsplus_inode_write_fork(inode, &file->data_fork);
 		hfsplus_cat_set_perms(inode, &file->permissions);
-		if ((file->permissions.rootflags | file->permissions.userflags) & HFSPLUS_FLG_IMMUTABLE)
+		if (HFSPLUS_FLG_IMMUTABLE &
+				(file->permissions.rootflags |
+					file->permissions.userflags))
 			file->flags |= cpu_to_be16(HFSPLUS_FILE_LOCKED);
 		else
 			file->flags &= cpu_to_be16(~HFSPLUS_FILE_LOCKED);
@@ -588,6 +611,8 @@ int hfsplus_cat_write_inode(struct inode *inode)
 		hfs_bnode_write(fd.bnode, &entry, fd.entryoffset,
 					 sizeof(struct hfsplus_cat_file));
 	}
+
+	set_bit(HFSPLUS_I_CAT_DIRTY, &HFSPLUS_I(inode)->flags);
 out:
 	hfs_find_exit(&fd);
 	return 0;
diff --git a/fs/hfsplus/ioctl.c b/fs/hfsplus/ioctl.c
index 40a85a3ded6..508ce662ce1 100644
--- a/fs/hfsplus/ioctl.c
+++ b/fs/hfsplus/ioctl.c
@@ -28,7 +28,7 @@ static int hfsplus_ioctl_getflags(struct file *file, int __user *user_flags)
 
 	if (inode->i_flags & S_IMMUTABLE)
 		flags |= FS_IMMUTABLE_FL;
-	if (inode->i_flags |= S_APPEND)
+	if (inode->i_flags & S_APPEND)
 		flags |= FS_APPEND_FL;
 	if (hip->userflags & HFSPLUS_FLG_NODUMP)
 		flags |= FS_NODUMP_FL;
@@ -147,9 +147,11 @@ int hfsplus_setxattr(struct dentry *dentry, const char *name,
 			res = -ERANGE;
 	} else
 		res = -EOPNOTSUPP;
-	if (!res)
+	if (!res) {
 		hfs_bnode_write(fd.bnode, &entry, fd.entryoffset,
 				sizeof(struct hfsplus_cat_file));
+		hfsplus_mark_inode_dirty(inode, HFSPLUS_I_CAT_DIRTY);
+	}
 out:
 	hfs_find_exit(&fd);
 	return res;
diff --git a/fs/hfsplus/options.c b/fs/hfsplus/options.c
index f9ab276a4d8..bb62a588214 100644
--- a/fs/hfsplus/options.c
+++ b/fs/hfsplus/options.c
@@ -23,6 +23,7 @@ enum {
 	opt_umask, opt_uid, opt_gid,
 	opt_part, opt_session, opt_nls,
 	opt_nodecompose, opt_decompose,
+	opt_barrier, opt_nobarrier,
 	opt_force, opt_err
 };
 
@@ -37,6 +38,8 @@ static const match_table_t tokens = {
 	{ opt_nls, "nls=%s" },
 	{ opt_decompose, "decompose" },
 	{ opt_nodecompose, "nodecompose" },
+	{ opt_barrier, "barrier" },
+	{ opt_nobarrier, "nobarrier" },
 	{ opt_force, "force" },
 	{ opt_err, NULL }
 };
@@ -65,6 +68,32 @@ static inline int match_fourchar(substring_t *arg, u32 *result)
 	return 0;
 }
 
+int hfsplus_parse_options_remount(char *input, int *force)
+{
+	char *p;
+	substring_t args[MAX_OPT_ARGS];
+	int token;
+
+	if (!input)
+		return 0;
+
+	while ((p = strsep(&input, ",")) != NULL) {
+		if (!*p)
+			continue;
+
+		token = match_token(p, tokens, args);
+		switch (token) {
+		case opt_force:
+			*force = 1;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return 1;
+}
+
 /* Parse options from mount. Returns 0 on failure */
 /* input is the options passed to mount() as a string */
 int hfsplus_parse_options(char *input, struct hfsplus_sb_info *sbi)
@@ -136,7 +165,9 @@ int hfsplus_parse_options(char *input, struct hfsplus_sb_info *sbi)
 			if (p)
 				sbi->nls = load_nls(p);
 			if (!sbi->nls) {
-				printk(KERN_ERR "hfs: unable to load nls mapping \"%s\"\n", p);
+				printk(KERN_ERR "hfs: unable to load "
+						"nls mapping \"%s\"\n",
+					p);
 				kfree(p);
 				return 0;
 			}
@@ -148,6 +179,12 @@ int hfsplus_parse_options(char *input, struct hfsplus_sb_info *sbi)
 		case opt_nodecompose:
 			set_bit(HFSPLUS_SB_NODECOMPOSE, &sbi->flags);
 			break;
+		case opt_barrier:
+			clear_bit(HFSPLUS_SB_NOBARRIER, &sbi->flags);
+			break;
+		case opt_nobarrier:
+			set_bit(HFSPLUS_SB_NOBARRIER, &sbi->flags);
+			break;
 		case opt_force:
 			set_bit(HFSPLUS_SB_FORCE, &sbi->flags);
 			break;
@@ -177,7 +214,8 @@ int hfsplus_show_options(struct seq_file *seq, struct vfsmount *mnt)
 		seq_printf(seq, ",creator=%.4s", (char *)&sbi->creator);
 	if (sbi->type != HFSPLUS_DEF_CR_TYPE)
 		seq_printf(seq, ",type=%.4s", (char *)&sbi->type);
-	seq_printf(seq, ",umask=%o,uid=%u,gid=%u", sbi->umask, sbi->uid, sbi->gid);
+	seq_printf(seq, ",umask=%o,uid=%u,gid=%u", sbi->umask,
+		sbi->uid, sbi->gid);
 	if (sbi->part >= 0)
 		seq_printf(seq, ",part=%u", sbi->part);
 	if (sbi->session >= 0)
@@ -186,5 +224,7 @@ int hfsplus_show_options(struct seq_file *seq, struct vfsmount *mnt)
 		seq_printf(seq, ",nls=%s", sbi->nls->charset);
 	if (test_bit(HFSPLUS_SB_NODECOMPOSE, &sbi->flags))
 		seq_printf(seq, ",nodecompose");
+	if (test_bit(HFSPLUS_SB_NOBARRIER, &sbi->flags))
+		seq_printf(seq, ",nobarrier");
 	return 0;
 }
diff --git a/fs/hfsplus/part_tbl.c b/fs/hfsplus/part_tbl.c
index 208b16c645c..d66ad113b1c 100644
--- a/fs/hfsplus/part_tbl.c
+++ b/fs/hfsplus/part_tbl.c
@@ -2,7 +2,8 @@
  * linux/fs/hfsplus/part_tbl.c
  *
  * Copyright (C) 1996-1997  Paul H. Hargrove
- * This file may be distributed under the terms of the GNU General Public License.
+ * This file may be distributed under the terms of
+ * the GNU General Public License.
  *
  * Original code to handle the new style Mac partition table based on
  * a patch contributed by Holger Schemel (aeglos@valinor.owl.de).
@@ -13,6 +14,7 @@
  *
  */
 
+#include <linux/slab.h>
 #include "hfsplus_fs.h"
 
 /* offsets to various blocks */
@@ -58,77 +60,94 @@ struct new_pmap {
  */
 struct old_pmap {
 	__be16		pdSig;	/* Signature bytes */
-	struct 	old_pmap_entry {
+	struct old_pmap_entry {
 		__be32	pdStart;
 		__be32	pdSize;
 		__be32	pdFSID;
 	}	pdEntry[42];
 } __packed;
 
+static int hfs_parse_old_pmap(struct super_block *sb, struct old_pmap *pm,
+		sector_t *part_start, sector_t *part_size)
+{
+	struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
+	int i;
+
+	for (i = 0; i < 42; i++) {
+		struct old_pmap_entry *p = &pm->pdEntry[i];
+
+		if (p->pdStart && p->pdSize &&
+		    p->pdFSID == cpu_to_be32(0x54465331)/*"TFS1"*/ &&
+		    (sbi->part < 0 || sbi->part == i)) {
+			*part_start += be32_to_cpu(p->pdStart);
+			*part_size = be32_to_cpu(p->pdSize);
+			return 0;
+		}
+	}
+
+	return -ENOENT;
+}
+
+static int hfs_parse_new_pmap(struct super_block *sb, struct new_pmap *pm,
+		sector_t *part_start, sector_t *part_size)
+{
+	struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
+	int size = be32_to_cpu(pm->pmMapBlkCnt);
+	int res;
+	int i = 0;
+
+	do {
+		if (!memcmp(pm->pmPartType, "Apple_HFS", 9) &&
+		    (sbi->part < 0 || sbi->part == i)) {
+			*part_start += be32_to_cpu(pm->pmPyPartStart);
+			*part_size = be32_to_cpu(pm->pmPartBlkCnt);
+			return 0;
+		}
+
+		if (++i >= size)
+			return -ENOENT;
+
+		res = hfsplus_submit_bio(sb->s_bdev,
+					 *part_start + HFS_PMAP_BLK + i,
+					 pm, READ);
+		if (res)
+			return res;
+	} while (pm->pmSig == cpu_to_be16(HFS_NEW_PMAP_MAGIC));
+
+	return -ENOENT;
+}
+
 /*
- * hfs_part_find()
- *
- * Parse the partition map looking for the
- * start and length of the 'part'th HFS partition.
+ * Parse the partition map looking for the start and length of a
+ * HFS/HFS+ partition.
  */
 int hfs_part_find(struct super_block *sb,
-		  sector_t *part_start, sector_t *part_size)
+		sector_t *part_start, sector_t *part_size)
 {
-	struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
-	struct buffer_head *bh;
-	__be16 *data;
-	int i, size, res;
+	void *data;
+	int res;
+
+	data = kmalloc(HFSPLUS_SECTOR_SIZE, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
 
-	res = -ENOENT;
-	bh = sb_bread512(sb, *part_start + HFS_PMAP_BLK, data);
-	if (!bh)
-		return -EIO;
+	res = hfsplus_submit_bio(sb->s_bdev, *part_start + HFS_PMAP_BLK,
+				 data, READ);
+	if (res)
+		return res;
 
-	switch (be16_to_cpu(*data)) {
+	switch (be16_to_cpu(*((__be16 *)data))) {
 	case HFS_OLD_PMAP_MAGIC:
-	  {
-		struct old_pmap *pm;
-		struct old_pmap_entry *p;
-
-		pm = (struct old_pmap *)bh->b_data;
-		p = pm->pdEntry;
-		size = 42;
-		for (i = 0; i < size; p++, i++) {
-			if (p->pdStart && p->pdSize &&
-			    p->pdFSID == cpu_to_be32(0x54465331)/*"TFS1"*/ &&
-			    (sbi->part < 0 || sbi->part == i)) {
-				*part_start += be32_to_cpu(p->pdStart);
-				*part_size = be32_to_cpu(p->pdSize);
-				res = 0;
-			}
-		}
+		res = hfs_parse_old_pmap(sb, data, part_start, part_size);
 		break;
-	  }
 	case HFS_NEW_PMAP_MAGIC:
-	  {
-		struct new_pmap *pm;
-
-		pm = (struct new_pmap *)bh->b_data;
-		size = be32_to_cpu(pm->pmMapBlkCnt);
-		for (i = 0; i < size;) {
-			if (!memcmp(pm->pmPartType,"Apple_HFS", 9) &&
-			    (sbi->part < 0 || sbi->part == i)) {
-				*part_start += be32_to_cpu(pm->pmPyPartStart);
-				*part_size = be32_to_cpu(pm->pmPartBlkCnt);
-				res = 0;
-				break;
-			}
-			brelse(bh);
-			bh = sb_bread512(sb, *part_start + HFS_PMAP_BLK + ++i, pm);
-			if (!bh)
-				return -EIO;
-			if (pm->pmSig != cpu_to_be16(HFS_NEW_PMAP_MAGIC))
-				break;
-		}
+		res = hfs_parse_new_pmap(sb, data, part_start, part_size);
+		break;
+	default:
+		res = -ENOENT;
 		break;
-	  }
 	}
-	brelse(bh);
 
+	kfree(data);
 	return res;
 }
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index 52cc746d3ba..6ee6ad20acf 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/pagemap.h>
+#include <linux/blkdev.h>
 #include <linux/fs.h>
 #include <linux/slab.h>
 #include <linux/vfs.h>
@@ -66,6 +67,7 @@ struct inode *hfsplus_iget(struct super_block *sb, unsigned long ino)
 	INIT_LIST_HEAD(&HFSPLUS_I(inode)->open_dir_list);
 	mutex_init(&HFSPLUS_I(inode)->extents_lock);
 	HFSPLUS_I(inode)->flags = 0;
+	HFSPLUS_I(inode)->extent_state = 0;
 	HFSPLUS_I(inode)->rsrc_inode = NULL;
 	atomic_set(&HFSPLUS_I(inode)->opencnt, 0);
 
@@ -157,45 +159,65 @@ int hfsplus_sync_fs(struct super_block *sb, int wait)
 {
 	struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
 	struct hfsplus_vh *vhdr = sbi->s_vhdr;
+	int write_backup = 0;
+	int error, error2;
+
+	if (!wait)
+		return 0;
 
 	dprint(DBG_SUPER, "hfsplus_write_super\n");
 
-	mutex_lock(&sbi->vh_mutex);
-	mutex_lock(&sbi->alloc_mutex);
 	sb->s_dirt = 0;
 
+	/*
+	 * Explicitly write out the special metadata inodes.
+	 *
+	 * While these special inodes are marked as hashed and written
+	 * out peridocically by the flusher threads we redirty them
+	 * during writeout of normal inodes, and thus the life lock
+	 * prevents us from getting the latest state to disk.
+	 */
+	error = filemap_write_and_wait(sbi->cat_tree->inode->i_mapping);
+	error2 = filemap_write_and_wait(sbi->ext_tree->inode->i_mapping);
+	if (!error)
+		error = error2;
+	error2 = filemap_write_and_wait(sbi->alloc_file->i_mapping);
+	if (!error)
+		error = error2;
+
+	mutex_lock(&sbi->vh_mutex);
+	mutex_lock(&sbi->alloc_mutex);
 	vhdr->free_blocks = cpu_to_be32(sbi->free_blocks);
 	vhdr->next_cnid = cpu_to_be32(sbi->next_cnid);
 	vhdr->folder_count = cpu_to_be32(sbi->folder_count);
 	vhdr->file_count = cpu_to_be32(sbi->file_count);
 
-	mark_buffer_dirty(sbi->s_vhbh);
 	if (test_and_clear_bit(HFSPLUS_SB_WRITEBACKUP, &sbi->flags)) {
-		if (sbi->sect_count) {
-			struct buffer_head *bh;
-			u32 block, offset;
-
-			block = sbi->blockoffset;
-			block += (sbi->sect_count - 2) >> (sb->s_blocksize_bits - 9);
-			offset = ((sbi->sect_count - 2) << 9) & (sb->s_blocksize - 1);
-			printk(KERN_DEBUG "hfs: backup: %u,%u,%u,%u\n",
-					  sbi->blockoffset, sbi->sect_count,
-					  block, offset);
-			bh = sb_bread(sb, block);
-			if (bh) {
-				vhdr = (struct hfsplus_vh *)(bh->b_data + offset);
-				if (be16_to_cpu(vhdr->signature) == HFSPLUS_VOLHEAD_SIG) {
-					memcpy(vhdr, sbi->s_vhdr, sizeof(*vhdr));
-					mark_buffer_dirty(bh);
-					brelse(bh);
-				} else
-					printk(KERN_WARNING "hfs: backup not found!\n");
-			}
-		}
+		memcpy(sbi->s_backup_vhdr, sbi->s_vhdr, sizeof(*sbi->s_vhdr));
+		write_backup = 1;
 	}
+
+	error2 = hfsplus_submit_bio(sb->s_bdev,
+				   sbi->part_start + HFSPLUS_VOLHEAD_SECTOR,
+				   sbi->s_vhdr, WRITE_SYNC);
+	if (!error)
+		error = error2;
+	if (!write_backup)
+		goto out;
+
+	error2 = hfsplus_submit_bio(sb->s_bdev,
+				  sbi->part_start + sbi->sect_count - 2,
+				  sbi->s_backup_vhdr, WRITE_SYNC);
+	if (!error)
+		error2 = error;
+out:
 	mutex_unlock(&sbi->alloc_mutex);
 	mutex_unlock(&sbi->vh_mutex);
-	return 0;
+
+	if (!test_bit(HFSPLUS_SB_NOBARRIER, &sbi->flags))
+		blkdev_issue_flush(sb->s_bdev, GFP_KERNEL, NULL);
+
+	return error;
 }
 
 static void hfsplus_write_super(struct super_block *sb)
@@ -215,23 +237,22 @@ static void hfsplus_put_super(struct super_block *sb)
 	if (!sb->s_fs_info)
 		return;
 
-	if (sb->s_dirt)
-		hfsplus_write_super(sb);
 	if (!(sb->s_flags & MS_RDONLY) && sbi->s_vhdr) {
 		struct hfsplus_vh *vhdr = sbi->s_vhdr;
 
 		vhdr->modify_date = hfsp_now2mt();
 		vhdr->attributes |= cpu_to_be32(HFSPLUS_VOL_UNMNT);
 		vhdr->attributes &= cpu_to_be32(~HFSPLUS_VOL_INCNSTNT);
-		mark_buffer_dirty(sbi->s_vhbh);
-		sync_dirty_buffer(sbi->s_vhbh);
+
+		hfsplus_sync_fs(sb, 1);
 	}
 
 	hfs_btree_close(sbi->cat_tree);
 	hfs_btree_close(sbi->ext_tree);
 	iput(sbi->alloc_file);
 	iput(sbi->hidden_dir);
-	brelse(sbi->s_vhbh);
+	kfree(sbi->s_vhdr);
+	kfree(sbi->s_backup_vhdr);
 	unload_nls(sbi->nls);
 	kfree(sb->s_fs_info);
 	sb->s_fs_info = NULL;
@@ -263,26 +284,31 @@ static int hfsplus_remount(struct super_block *sb, int *flags, char *data)
 		return 0;
 	if (!(*flags & MS_RDONLY)) {
 		struct hfsplus_vh *vhdr = HFSPLUS_SB(sb)->s_vhdr;
-		struct hfsplus_sb_info sbi;
+		int force = 0;
 
-		memset(&sbi, 0, sizeof(struct hfsplus_sb_info));
-		sbi.nls = HFSPLUS_SB(sb)->nls;
-		if (!hfsplus_parse_options(data, &sbi))
+		if (!hfsplus_parse_options_remount(data, &force))
 			return -EINVAL;
 
 		if (!(vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_UNMNT))) {
-			printk(KERN_WARNING "hfs: filesystem was not cleanly unmounted, "
-			       "running fsck.hfsplus is recommended.  leaving read-only.\n");
+			printk(KERN_WARNING "hfs: filesystem was "
+					"not cleanly unmounted, "
+					"running fsck.hfsplus is recommended.  "
+					"leaving read-only.\n");
 			sb->s_flags |= MS_RDONLY;
 			*flags |= MS_RDONLY;
-		} else if (test_bit(HFSPLUS_SB_FORCE, &sbi.flags)) {
+		} else if (force) {
 			/* nothing */
-		} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_SOFTLOCK)) {
-			printk(KERN_WARNING "hfs: filesystem is marked locked, leaving read-only.\n");
+		} else if (vhdr->attributes &
+				cpu_to_be32(HFSPLUS_VOL_SOFTLOCK)) {
+			printk(KERN_WARNING "hfs: filesystem is marked locked, "
+					"leaving read-only.\n");
 			sb->s_flags |= MS_RDONLY;
 			*flags |= MS_RDONLY;
-		} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_JOURNALED)) {
-			printk(KERN_WARNING "hfs: filesystem is marked journaled, leaving read-only.\n");
+		} else if (vhdr->attributes &
+				cpu_to_be32(HFSPLUS_VOL_JOURNALED)) {
+			printk(KERN_WARNING "hfs: filesystem is "
+					"marked journaled, "
+					"leaving read-only.\n");
 			sb->s_flags |= MS_RDONLY;
 			*flags |= MS_RDONLY;
 		}
@@ -372,17 +398,22 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent)
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
 
 	if (!(vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_UNMNT))) {
-		printk(KERN_WARNING "hfs: Filesystem was not cleanly unmounted, "
-		       "running fsck.hfsplus is recommended.  mounting read-only.\n");
+		printk(KERN_WARNING "hfs: Filesystem was "
+				"not cleanly unmounted, "
+				"running fsck.hfsplus is recommended.  "
+				"mounting read-only.\n");
 		sb->s_flags |= MS_RDONLY;
 	} else if (test_and_clear_bit(HFSPLUS_SB_FORCE, &sbi->flags)) {
 		/* nothing */
 	} else if (vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_SOFTLOCK)) {
 		printk(KERN_WARNING "hfs: Filesystem is marked locked, mounting read-only.\n");
 		sb->s_flags |= MS_RDONLY;
-	} else if ((vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_JOURNALED)) && !(sb->s_flags & MS_RDONLY)) {
-		printk(KERN_WARNING "hfs: write access to a journaled filesystem is not supported, "
-		       "use the force option at your own risk, mounting read-only.\n");
+	} else if ((vhdr->attributes & cpu_to_be32(HFSPLUS_VOL_JOURNALED)) &&
+			!(sb->s_flags & MS_RDONLY)) {
+		printk(KERN_WARNING "hfs: write access to "
+				"a journaled filesystem is not supported, "
+				"use the force option at your own risk, "
+				"mounting read-only.\n");
 		sb->s_flags |= MS_RDONLY;
 	}
 
@@ -419,7 +450,7 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent)
 		err = -ENOMEM;
 		goto cleanup;
 	}
-	sb->s_root->d_op = &hfsplus_dentry_operations;
+	d_set_d_op(sb->s_root, &hfsplus_dentry_operations);
 
 	str.len = sizeof(HFSP_HIDDENDIR_NAME) - 1;
 	str.name = HFSP_HIDDENDIR_NAME;
@@ -449,19 +480,16 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent)
 	be32_add_cpu(&vhdr->write_count, 1);
 	vhdr->attributes &= cpu_to_be32(~HFSPLUS_VOL_UNMNT);
 	vhdr->attributes |= cpu_to_be32(HFSPLUS_VOL_INCNSTNT);
-	mark_buffer_dirty(sbi->s_vhbh);
-	sync_dirty_buffer(sbi->s_vhbh);
+	hfsplus_sync_fs(sb, 1);
 
 	if (!sbi->hidden_dir) {
-		printk(KERN_DEBUG "hfs: create hidden dir...\n");
-
 		mutex_lock(&sbi->vh_mutex);
 		sbi->hidden_dir = hfsplus_new_inode(sb, S_IFDIR);
 		hfsplus_create_cat(sbi->hidden_dir->i_ino, sb->s_root->d_inode,
 				   &str, sbi->hidden_dir);
 		mutex_unlock(&sbi->vh_mutex);
 
-		mark_inode_dirty(sbi->hidden_dir);
+		hfsplus_mark_inode_dirty(sbi->hidden_dir, HFSPLUS_I_CAT_DIRTY);
 	}
 out:
 	unload_nls(sbi->nls);
@@ -488,11 +516,19 @@ static struct inode *hfsplus_alloc_inode(struct super_block *sb)
 	return i ? &i->vfs_inode : NULL;
 }
 
-static void hfsplus_destroy_inode(struct inode *inode)
+static void hfsplus_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(hfsplus_inode_cachep, HFSPLUS_I(inode));
 }
 
+static void hfsplus_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, hfsplus_i_callback);
+}
+
 #define HFSPLUS_INODE_SIZE	sizeof(struct hfsplus_inode_info)
 
 static struct dentry *hfsplus_mount(struct file_system_type *fs_type,
diff --git a/fs/hfsplus/unicode.c b/fs/hfsplus/unicode.c
index b66d67de882..a3f0bfcc881 100644
--- a/fs/hfsplus/unicode.c
+++ b/fs/hfsplus/unicode.c
@@ -17,14 +17,14 @@
 /* Returns folded char, or 0 if ignorable */
 static inline u16 case_fold(u16 c)
 {
-        u16 tmp;
-
-        tmp = hfsplus_case_fold_table[c >> 8];
-        if (tmp)
-                tmp = hfsplus_case_fold_table[tmp + (c & 0xff)];
-        else
-                tmp = c;
-        return tmp;
+	u16 tmp;
+
+	tmp = hfsplus_case_fold_table[c >> 8];
+	if (tmp)
+		tmp = hfsplus_case_fold_table[tmp + (c & 0xff)];
+	else
+		tmp = c;
+	return tmp;
 }
 
 /* Compare unicode strings, return values like normal strcmp */
@@ -118,7 +118,9 @@ static u16 *hfsplus_compose_lookup(u16 *p, u16 cc)
 	return NULL;
 }
 
-int hfsplus_uni2asc(struct super_block *sb, const struct hfsplus_unistr *ustr, char *astr, int *len_p)
+int hfsplus_uni2asc(struct super_block *sb,
+		const struct hfsplus_unistr *ustr,
+		char *astr, int *len_p)
 {
 	const hfsplus_unichr *ip;
 	struct nls_table *nls = HFSPLUS_SB(sb)->nls;
@@ -171,7 +173,8 @@ int hfsplus_uni2asc(struct super_block *sb, const struct hfsplus_unistr *ustr, c
 				goto same;
 			c1 = be16_to_cpu(*ip);
 			if (likely(compose))
-				ce1 = hfsplus_compose_lookup(hfsplus_compose_table, c1);
+				ce1 = hfsplus_compose_lookup(
+					hfsplus_compose_table, c1);
 			if (ce1)
 				break;
 			switch (c0) {
@@ -199,7 +202,8 @@ int hfsplus_uni2asc(struct super_block *sb, const struct hfsplus_unistr *ustr, c
 		if (ce2) {
 			i = 1;
 			while (i < ustrlen) {
-				ce1 = hfsplus_compose_lookup(ce2, be16_to_cpu(ip[i]));
+				ce1 = hfsplus_compose_lookup(ce2,
+					be16_to_cpu(ip[i]));
 				if (!ce1)
 					break;
 				i++;
@@ -211,7 +215,7 @@ int hfsplus_uni2asc(struct super_block *sb, const struct hfsplus_unistr *ustr, c
 				goto done;
 			}
 		}
-	same:
+same:
 		switch (c0) {
 		case 0:
 			cc = 0x2400;
@@ -222,7 +226,7 @@ int hfsplus_uni2asc(struct super_block *sb, const struct hfsplus_unistr *ustr, c
 		default:
 			cc = c0;
 		}
-	done:
+done:
 		res = nls->uni2char(cc, op, len);
 		if (res < 0) {
 			if (res == -ENAMETOOLONG)
@@ -320,7 +324,8 @@ int hfsplus_asc2uni(struct super_block *sb, struct hfsplus_unistr *ustr,
  * Composed unicode characters are decomposed and case-folding is performed
  * if the appropriate bits are (un)set on the superblock.
  */
-int hfsplus_hash_dentry(struct dentry *dentry, struct qstr *str)
+int hfsplus_hash_dentry(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *str)
 {
 	struct super_block *sb = dentry->d_sb;
 	const char *astr;
@@ -363,9 +368,12 @@ int hfsplus_hash_dentry(struct dentry *dentry, struct qstr *str)
  * Composed unicode characters are decomposed and case-folding is performed
  * if the appropriate bits are (un)set on the superblock.
  */
-int hfsplus_compare_dentry(struct dentry *dentry, struct qstr *s1, struct qstr *s2)
+int hfsplus_compare_dentry(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	struct super_block *sb = dentry->d_sb;
+	struct super_block *sb = parent->d_sb;
 	int casefold, decompose, size;
 	int dsize1, dsize2, len1, len2;
 	const u16 *dstr1, *dstr2;
@@ -375,10 +383,10 @@ int hfsplus_compare_dentry(struct dentry *dentry, struct qstr *s1, struct qstr *
 
 	casefold = test_bit(HFSPLUS_SB_CASEFOLD, &HFSPLUS_SB(sb)->flags);
 	decompose = !test_bit(HFSPLUS_SB_NODECOMPOSE, &HFSPLUS_SB(sb)->flags);
-	astr1 = s1->name;
-	len1 = s1->len;
-	astr2 = s2->name;
-	len2 = s2->len;
+	astr1 = str;
+	len1 = len;
+	astr2 = name->name;
+	len2 = name->len;
 	dsize1 = dsize2 = 0;
 	dstr1 = dstr2 = NULL;
 
@@ -388,7 +396,9 @@ int hfsplus_compare_dentry(struct dentry *dentry, struct qstr *s1, struct qstr *
 			astr1 += size;
 			len1 -= size;
 
-			if (!decompose || !(dstr1 = decompose_unichar(c, &dsize1))) {
+			if (decompose)
+				dstr1 = decompose_unichar(c, &dsize1);
+			if (!decompose || !dstr1) {
 				c1 = c;
 				dstr1 = &c1;
 				dsize1 = 1;
@@ -400,7 +410,9 @@ int hfsplus_compare_dentry(struct dentry *dentry, struct qstr *s1, struct qstr *
 			astr2 += size;
 			len2 -= size;
 
-			if (!decompose || !(dstr2 = decompose_unichar(c, &dsize2))) {
+			if (decompose)
+				dstr2 = decompose_unichar(c, &dsize2);
+			if (!decompose || !dstr2) {
 				c2 = c;
 				dstr2 = &c2;
 				dsize2 = 1;
diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c
index 8972c20b321..196231794f6 100644
--- a/fs/hfsplus/wrapper.c
+++ b/fs/hfsplus/wrapper.c
@@ -24,6 +24,40 @@ struct hfsplus_wd {
 	u16 embed_count;
 };
 
+static void hfsplus_end_io_sync(struct bio *bio, int err)
+{
+	if (err)
+		clear_bit(BIO_UPTODATE, &bio->bi_flags);
+	complete(bio->bi_private);
+}
+
+int hfsplus_submit_bio(struct block_device *bdev, sector_t sector,
+		void *data, int rw)
+{
+	DECLARE_COMPLETION_ONSTACK(wait);
+	struct bio *bio;
+
+	bio = bio_alloc(GFP_NOIO, 1);
+	bio->bi_sector = sector;
+	bio->bi_bdev = bdev;
+	bio->bi_end_io = hfsplus_end_io_sync;
+	bio->bi_private = &wait;
+
+	/*
+	 * We always submit one sector at a time, so bio_add_page must not fail.
+	 */
+	if (bio_add_page(bio, virt_to_page(data), HFSPLUS_SECTOR_SIZE,
+			 offset_in_page(data)) != HFSPLUS_SECTOR_SIZE)
+		BUG();
+
+	submit_bio(rw, bio);
+	wait_for_completion(&wait);
+
+	if (!bio_flagged(bio, BIO_UPTODATE))
+		return -EIO;
+	return 0;
+}
+
 static int hfsplus_read_mdb(void *bufptr, struct hfsplus_wd *wd)
 {
 	u32 extent;
@@ -40,12 +74,14 @@ static int hfsplus_read_mdb(void *bufptr, struct hfsplus_wd *wd)
 	   !(attrib & HFSP_WRAP_ATTRIB_SPARED))
 		return 0;
 
-	wd->ablk_size = be32_to_cpu(*(__be32 *)(bufptr + HFSP_WRAPOFF_ABLKSIZE));
+	wd->ablk_size =
+		be32_to_cpu(*(__be32 *)(bufptr + HFSP_WRAPOFF_ABLKSIZE));
 	if (wd->ablk_size < HFSPLUS_SECTOR_SIZE)
 		return 0;
 	if (wd->ablk_size % HFSPLUS_SECTOR_SIZE)
 		return 0;
-	wd->ablk_start = be16_to_cpu(*(__be16 *)(bufptr + HFSP_WRAPOFF_ABLKSTART));
+	wd->ablk_start =
+		be16_to_cpu(*(__be16 *)(bufptr + HFSP_WRAPOFF_ABLKSTART));
 
 	extent = get_unaligned_be32(bufptr + HFSP_WRAPOFF_EMBEDEXT);
 	wd->embed_start = (extent >> 16) & 0xFFFF;
@@ -68,7 +104,8 @@ static int hfsplus_get_last_session(struct super_block *sb,
 	if (HFSPLUS_SB(sb)->session >= 0) {
 		te.cdte_track = HFSPLUS_SB(sb)->session;
 		te.cdte_format = CDROM_LBA;
-		res = ioctl_by_bdev(sb->s_bdev, CDROMREADTOCENTRY, (unsigned long)&te);
+		res = ioctl_by_bdev(sb->s_bdev,
+			CDROMREADTOCENTRY, (unsigned long)&te);
 		if (!res && (te.cdte_ctrl & CDROM_DATA_TRACK) == 4) {
 			*start = (sector_t)te.cdte_addr.lba << 2;
 			return 0;
@@ -77,7 +114,8 @@ static int hfsplus_get_last_session(struct super_block *sb,
 		return -EINVAL;
 	}
 	ms_info.addr_format = CDROM_LBA;
-	res = ioctl_by_bdev(sb->s_bdev, CDROMMULTISESSION, (unsigned long)&ms_info);
+	res = ioctl_by_bdev(sb->s_bdev, CDROMMULTISESSION,
+		(unsigned long)&ms_info);
 	if (!res && ms_info.xa_flag)
 		*start = (sector_t)ms_info.addr.lba << 2;
 	return 0;
@@ -88,100 +126,112 @@ static int hfsplus_get_last_session(struct super_block *sb,
 int hfsplus_read_wrapper(struct super_block *sb)
 {
 	struct hfsplus_sb_info *sbi = HFSPLUS_SB(sb);
-	struct buffer_head *bh;
-	struct hfsplus_vh *vhdr;
 	struct hfsplus_wd wd;
 	sector_t part_start, part_size;
 	u32 blocksize;
+	int error = 0;
 
+	error = -EINVAL;
 	blocksize = sb_min_blocksize(sb, HFSPLUS_SECTOR_SIZE);
 	if (!blocksize)
-		return -EINVAL;
+		goto out;
 
 	if (hfsplus_get_last_session(sb, &part_start, &part_size))
-		return -EINVAL;
+		goto out;
 	if ((u64)part_start + part_size > 0x100000000ULL) {
 		pr_err("hfs: volumes larger than 2TB are not supported yet\n");
-		return -EINVAL;
+		goto out;
 	}
-	while (1) {
-		bh = sb_bread512(sb, part_start + HFSPLUS_VOLHEAD_SECTOR, vhdr);
-		if (!bh)
-			return -EIO;
-
-		if (vhdr->signature == cpu_to_be16(HFSP_WRAP_MAGIC)) {
-			if (!hfsplus_read_mdb(vhdr, &wd))
-				goto error;
-			wd.ablk_size >>= HFSPLUS_SECTOR_SHIFT;
-			part_start += wd.ablk_start + wd.embed_start * wd.ablk_size;
-			part_size = wd.embed_count * wd.ablk_size;
-			brelse(bh);
-			bh = sb_bread512(sb, part_start + HFSPLUS_VOLHEAD_SECTOR, vhdr);
-			if (!bh)
-				return -EIO;
-		}
-		if (vhdr->signature == cpu_to_be16(HFSPLUS_VOLHEAD_SIG))
-			break;
-		if (vhdr->signature == cpu_to_be16(HFSPLUS_VOLHEAD_SIGX)) {
-			set_bit(HFSPLUS_SB_HFSX, &sbi->flags);
-			break;
-		}
-		brelse(bh);
 
-		/* check for a partition block
+	error = -ENOMEM;
+	sbi->s_vhdr = kmalloc(HFSPLUS_SECTOR_SIZE, GFP_KERNEL);
+	if (!sbi->s_vhdr)
+		goto out;
+	sbi->s_backup_vhdr = kmalloc(HFSPLUS_SECTOR_SIZE, GFP_KERNEL);
+	if (!sbi->s_backup_vhdr)
+		goto out_free_vhdr;
+
+reread:
+	error = hfsplus_submit_bio(sb->s_bdev,
+				   part_start + HFSPLUS_VOLHEAD_SECTOR,
+				   sbi->s_vhdr, READ);
+	if (error)
+		goto out_free_backup_vhdr;
+
+	error = -EINVAL;
+	switch (sbi->s_vhdr->signature) {
+	case cpu_to_be16(HFSPLUS_VOLHEAD_SIGX):
+		set_bit(HFSPLUS_SB_HFSX, &sbi->flags);
+		/*FALLTHRU*/
+	case cpu_to_be16(HFSPLUS_VOLHEAD_SIG):
+		break;
+	case cpu_to_be16(HFSP_WRAP_MAGIC):
+		if (!hfsplus_read_mdb(sbi->s_vhdr, &wd))
+			goto out;
+		wd.ablk_size >>= HFSPLUS_SECTOR_SHIFT;
+		part_start += wd.ablk_start + wd.embed_start * wd.ablk_size;
+		part_size = wd.embed_count * wd.ablk_size;
+		goto reread;
+	default:
+		/*
+		 * Check for a partition block.
+		 *
 		 * (should do this only for cdrom/loop though)
 		 */
 		if (hfs_part_find(sb, &part_start, &part_size))
-			return -EINVAL;
+			goto out;
+		goto reread;
+	}
+
+	error = hfsplus_submit_bio(sb->s_bdev,
+				   part_start + part_size - 2,
+				   sbi->s_backup_vhdr, READ);
+	if (error)
+		goto out_free_backup_vhdr;
+
+	error = -EINVAL;
+	if (sbi->s_backup_vhdr->signature != sbi->s_vhdr->signature) {
+		printk(KERN_WARNING
+			"hfs: invalid secondary volume header\n");
+		goto out_free_backup_vhdr;
 	}
 
-	blocksize = be32_to_cpu(vhdr->blocksize);
-	brelse(bh);
+	blocksize = be32_to_cpu(sbi->s_vhdr->blocksize);
 
-	/* block size must be at least as large as a sector
-	 * and a multiple of 2
+	/*
+	 * Block size must be at least as large as a sector and a multiple of 2.
 	 */
-	if (blocksize < HFSPLUS_SECTOR_SIZE ||
-	    ((blocksize - 1) & blocksize))
-		return -EINVAL;
+	if (blocksize < HFSPLUS_SECTOR_SIZE || ((blocksize - 1) & blocksize))
+		goto out_free_backup_vhdr;
 	sbi->alloc_blksz = blocksize;
 	sbi->alloc_blksz_shift = 0;
 	while ((blocksize >>= 1) != 0)
 		sbi->alloc_blksz_shift++;
 	blocksize = min(sbi->alloc_blksz, (u32)PAGE_SIZE);
 
-	/* align block size to block offset */
+	/*
+	 * Align block size to block offset.
+	 */
 	while (part_start & ((blocksize >> HFSPLUS_SECTOR_SHIFT) - 1))
 		blocksize >>= 1;
 
 	if (sb_set_blocksize(sb, blocksize) != blocksize) {
-		printk(KERN_ERR "hfs: unable to set blocksize to %u!\n", blocksize);
-		return -EINVAL;
+		printk(KERN_ERR "hfs: unable to set blocksize to %u!\n",
+			blocksize);
+		goto out_free_backup_vhdr;
 	}
 
 	sbi->blockoffset =
 		part_start >> (sb->s_blocksize_bits - HFSPLUS_SECTOR_SHIFT);
+	sbi->part_start = part_start;
 	sbi->sect_count = part_size;
 	sbi->fs_shift = sbi->alloc_blksz_shift - sb->s_blocksize_bits;
-
-	bh = sb_bread512(sb, part_start + HFSPLUS_VOLHEAD_SECTOR, vhdr);
-	if (!bh)
-		return -EIO;
-
-	/* should still be the same... */
-	if (test_bit(HFSPLUS_SB_HFSX, &sbi->flags)) {
-		if (vhdr->signature != cpu_to_be16(HFSPLUS_VOLHEAD_SIGX))
-			goto error;
-	} else {
-		if (vhdr->signature != cpu_to_be16(HFSPLUS_VOLHEAD_SIG))
-			goto error;
-	}
-
-	sbi->s_vhbh = bh;
-	sbi->s_vhdr = vhdr;
-
 	return 0;
- error:
-	brelse(bh);
-	return -EINVAL;
+
+out_free_backup_vhdr:
+	kfree(sbi->s_backup_vhdr);
+out_free_vhdr:
+	kfree(sbi->s_vhdr);
+out:
+	return error;
 }
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 2c0f148a49e..d3244d949a4 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -32,7 +32,7 @@ static inline struct hostfs_inode_info *HOSTFS_I(struct inode *inode)
 
 #define FILE_HOSTFS_I(file) HOSTFS_I((file)->f_path.dentry->d_inode)
 
-static int hostfs_d_delete(struct dentry *dentry)
+static int hostfs_d_delete(const struct dentry *dentry)
 {
 	return 1;
 }
@@ -92,12 +92,10 @@ __uml_setup("hostfs=", hostfs_args,
 
 static char *__dentry_name(struct dentry *dentry, char *name)
 {
-	char *p = __dentry_path(dentry, name, PATH_MAX);
+	char *p = dentry_path_raw(dentry, name, PATH_MAX);
 	char *root;
 	size_t len;
 
-	spin_unlock(&dcache_lock);
-
 	root = dentry->d_sb->s_fs_info;
 	len = strlen(root);
 	if (IS_ERR(p)) {
@@ -123,25 +121,23 @@ static char *dentry_name(struct dentry *dentry)
 	if (!name)
 		return NULL;
 
-	spin_lock(&dcache_lock);
 	return __dentry_name(dentry, name); /* will unlock */
 }
 
 static char *inode_name(struct inode *ino)
 {
 	struct dentry *dentry;
-	char *name = __getname();
-	if (!name)
-		return NULL;
+	char *name;
 
-	spin_lock(&dcache_lock);
-	if (list_empty(&ino->i_dentry)) {
-		spin_unlock(&dcache_lock);
-		__putname(name);
+	dentry = d_find_alias(ino);
+	if (!dentry)
 		return NULL;
-	}
-	dentry = list_first_entry(&ino->i_dentry, struct dentry, d_alias);
-	return __dentry_name(dentry, name); /* will unlock */
+
+	name = dentry_name(dentry);
+
+	dput(dentry);
+
+	return name;
 }
 
 static char *follow_link(char *link)
@@ -251,11 +247,18 @@ static void hostfs_evict_inode(struct inode *inode)
 	}
 }
 
-static void hostfs_destroy_inode(struct inode *inode)
+static void hostfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kfree(HOSTFS_I(inode));
 }
 
+static void hostfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, hostfs_i_callback);
+}
+
 static int hostfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
 {
 	const char *root_path = vfs->mnt_sb->s_fs_info;
@@ -609,7 +612,7 @@ struct dentry *hostfs_lookup(struct inode *ino, struct dentry *dentry,
 		goto out_put;
 
 	d_add(dentry, inode);
-	dentry->d_op = &hostfs_dentry_ops;
+	d_set_d_op(dentry, &hostfs_dentry_ops);
 	return NULL;
 
  out_put:
@@ -746,11 +749,14 @@ int hostfs_rename(struct inode *from_ino, struct dentry *from,
 	return err;
 }
 
-int hostfs_permission(struct inode *ino, int desired)
+int hostfs_permission(struct inode *ino, int desired, unsigned int flags)
 {
 	char *name;
 	int r = 0, w = 0, x = 0, err;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	if (desired & MAY_READ) r = 1;
 	if (desired & MAY_WRITE) w = 1;
 	if (desired & MAY_EXEC) x = 1;
@@ -765,7 +771,7 @@ int hostfs_permission(struct inode *ino, int desired)
 		err = access_file(name, r, w, x);
 	__putname(name);
 	if (!err)
-		err = generic_permission(ino, desired, NULL);
+		err = generic_permission(ino, desired, flags, NULL);
 	return err;
 }
 
diff --git a/fs/hpfs/dentry.c b/fs/hpfs/dentry.c
index 67d9d36b3d5..32c13a94e1e 100644
--- a/fs/hpfs/dentry.c
+++ b/fs/hpfs/dentry.c
@@ -12,7 +12,8 @@
  * Note: the dentry argument is the parent dentry.
  */
 
-static int hpfs_hash_dentry(struct dentry *dentry, struct qstr *qstr)
+static int hpfs_hash_dentry(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *qstr)
 {
 	unsigned long	 hash;
 	int		 i;
@@ -34,19 +35,25 @@ static int hpfs_hash_dentry(struct dentry *dentry, struct qstr *qstr)
 	return 0;
 }
 
-static int hpfs_compare_dentry(struct dentry *dentry, struct qstr *a, struct qstr *b)
+static int hpfs_compare_dentry(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	unsigned al=a->len;
-	unsigned bl=b->len;
-	hpfs_adjust_length(a->name, &al);
+	unsigned al = len;
+	unsigned bl = name->len;
+
+	hpfs_adjust_length(str, &al);
 	/*hpfs_adjust_length(b->name, &bl);*/
-	/* 'a' is the qstr of an already existing dentry, so the name
-	 * must be valid. 'b' must be validated first.
+
+	/*
+	 * 'str' is the nane of an already existing dentry, so the name
+	 * must be valid. 'name' must be validated first.
 	 */
 
-	if (hpfs_chk_name(b->name, &bl))
+	if (hpfs_chk_name(name->name, &bl))
 		return 1;
-	if (hpfs_compare_names(dentry->d_sb, a->name, al, b->name, bl, 0))
+	if (hpfs_compare_names(parent->d_sb, str, al, name->name, bl, 0))
 		return 1;
 	return 0;
 }
@@ -58,5 +65,5 @@ static const struct dentry_operations hpfs_dentry_operations = {
 
 void hpfs_set_dentry_operations(struct dentry *dentry)
 {
-	dentry->d_op = &hpfs_dentry_operations;
+	d_set_d_op(dentry, &hpfs_dentry_operations);
 }
diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c
index 11c2b4080f6..f4ad9e31ddc 100644
--- a/fs/hpfs/namei.c
+++ b/fs/hpfs/namei.c
@@ -419,7 +419,7 @@ again:
 			unlock_kernel();
 			return -ENOSPC;
 		}
-		if (generic_permission(inode, MAY_WRITE, NULL) ||
+		if (generic_permission(inode, MAY_WRITE, 0, NULL) ||
 		    !S_ISREG(inode->i_mode) ||
 		    get_write_access(inode)) {
 			d_rehash(dentry);
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index 6c5f01597c3..49935ba78db 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -177,11 +177,18 @@ static struct inode *hpfs_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void hpfs_destroy_inode(struct inode *inode)
+static void hpfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(hpfs_inode_cachep, hpfs_i(inode));
 }
 
+static void hpfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, hpfs_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct hpfs_inode_info *ei = (struct hpfs_inode_info *) foo;
diff --git a/fs/hppfs/hppfs.c b/fs/hppfs/hppfs.c
index f702b5f713f..87ed48e0343 100644
--- a/fs/hppfs/hppfs.c
+++ b/fs/hppfs/hppfs.c
@@ -632,11 +632,18 @@ void hppfs_evict_inode(struct inode *ino)
 	mntput(ino->i_sb->s_fs_info);
 }
 
-static void hppfs_destroy_inode(struct inode *inode)
+static void hppfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kfree(HPPFS_I(inode));
 }
 
+static void hppfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, hppfs_i_callback);
+}
+
 static const struct super_operations hppfs_sbops = {
 	.alloc_inode	= hppfs_alloc_inode,
 	.destroy_inode	= hppfs_destroy_inode,
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index d6cfac1f0a4..9885082b470 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -663,11 +663,18 @@ static struct inode *hugetlbfs_alloc_inode(struct super_block *sb)
 	return &p->vfs_inode;
 }
 
+static void hugetlbfs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(hugetlbfs_inode_cachep, HUGETLBFS_I(inode));
+}
+
 static void hugetlbfs_destroy_inode(struct inode *inode)
 {
 	hugetlbfs_inc_free_inodes(HUGETLBFS_SB(inode->i_sb));
 	mpol_free_shared_policy(&HUGETLBFS_I(inode)->policy);
-	kmem_cache_free(hugetlbfs_inode_cachep, HUGETLBFS_I(inode));
+	call_rcu(&inode->i_rcu, hugetlbfs_i_callback);
 }
 
 static const struct address_space_operations hugetlbfs_aops = {
@@ -932,8 +939,7 @@ struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag,
 	if (creat_flags == HUGETLB_SHMFS_INODE && !can_do_hugetlb_shm()) {
 		*user = current_user();
 		if (user_shm_lock(size, *user)) {
-			WARN_ONCE(1,
-			  "Using mlock ulimits for SHM_HUGETLB deprecated\n");
+			printk_once(KERN_WARNING "Using mlock ulimits for SHM_HUGETLB is deprecated\n");
 		} else {
 			*user = NULL;
 			return ERR_PTR(-EPERM);
diff --git a/fs/inode.c b/fs/inode.c
index ae2727ab0c3..da85e56378f 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -102,26 +102,29 @@ static DECLARE_RWSEM(iprune_sem);
  */
 struct inodes_stat_t inodes_stat;
 
-static struct percpu_counter nr_inodes __cacheline_aligned_in_smp;
-static struct percpu_counter nr_inodes_unused __cacheline_aligned_in_smp;
+static DEFINE_PER_CPU(unsigned int, nr_inodes);
 
 static struct kmem_cache *inode_cachep __read_mostly;
 
-static inline int get_nr_inodes(void)
+static int get_nr_inodes(void)
 {
-	return percpu_counter_sum_positive(&nr_inodes);
+	int i;
+	int sum = 0;
+	for_each_possible_cpu(i)
+		sum += per_cpu(nr_inodes, i);
+	return sum < 0 ? 0 : sum;
 }
 
 static inline int get_nr_inodes_unused(void)
 {
-	return percpu_counter_sum_positive(&nr_inodes_unused);
+	return inodes_stat.nr_unused;
 }
 
 int get_nr_dirty_inodes(void)
 {
+	/* not actually dirty inodes, but a wild approximation */
 	int nr_dirty = get_nr_inodes() - get_nr_inodes_unused();
 	return nr_dirty > 0 ? nr_dirty : 0;
-
 }
 
 /*
@@ -132,7 +135,6 @@ int proc_nr_inodes(ctl_table *table, int write,
 		   void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	inodes_stat.nr_inodes = get_nr_inodes();
-	inodes_stat.nr_unused = get_nr_inodes_unused();
 	return proc_dointvec(table, write, buffer, lenp, ppos);
 }
 #endif
@@ -224,7 +226,7 @@ int inode_init_always(struct super_block *sb, struct inode *inode)
 	inode->i_fsnotify_mask = 0;
 #endif
 
-	percpu_counter_inc(&nr_inodes);
+	this_cpu_inc(nr_inodes);
 
 	return 0;
 out:
@@ -255,6 +257,12 @@ static struct inode *alloc_inode(struct super_block *sb)
 	return inode;
 }
 
+void free_inode_nonrcu(struct inode *inode)
+{
+	kmem_cache_free(inode_cachep, inode);
+}
+EXPORT_SYMBOL(free_inode_nonrcu);
+
 void __destroy_inode(struct inode *inode)
 {
 	BUG_ON(inode_has_buffers(inode));
@@ -266,10 +274,17 @@ void __destroy_inode(struct inode *inode)
 	if (inode->i_default_acl && inode->i_default_acl != ACL_NOT_CACHED)
 		posix_acl_release(inode->i_default_acl);
 #endif
-	percpu_counter_dec(&nr_inodes);
+	this_cpu_dec(nr_inodes);
 }
 EXPORT_SYMBOL(__destroy_inode);
 
+static void i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(inode_cachep, inode);
+}
+
 static void destroy_inode(struct inode *inode)
 {
 	BUG_ON(!list_empty(&inode->i_lru));
@@ -277,7 +292,7 @@ static void destroy_inode(struct inode *inode)
 	if (inode->i_sb->s_op->destroy_inode)
 		inode->i_sb->s_op->destroy_inode(inode);
 	else
-		kmem_cache_free(inode_cachep, (inode));
+		call_rcu(&inode->i_rcu, i_callback);
 }
 
 /*
@@ -335,7 +350,7 @@ static void inode_lru_list_add(struct inode *inode)
 {
 	if (list_empty(&inode->i_lru)) {
 		list_add(&inode->i_lru, &inode_lru);
-		percpu_counter_inc(&nr_inodes_unused);
+		inodes_stat.nr_unused++;
 	}
 }
 
@@ -343,7 +358,7 @@ static void inode_lru_list_del(struct inode *inode)
 {
 	if (!list_empty(&inode->i_lru)) {
 		list_del_init(&inode->i_lru);
-		percpu_counter_dec(&nr_inodes_unused);
+		inodes_stat.nr_unused--;
 	}
 }
 
@@ -430,6 +445,7 @@ void end_writeback(struct inode *inode)
 	BUG_ON(!(inode->i_state & I_FREEING));
 	BUG_ON(inode->i_state & I_CLEAR);
 	inode_sync_wait(inode);
+	/* don't need i_lock here, no concurrent mods to i_state */
 	inode->i_state = I_FREEING | I_CLEAR;
 }
 EXPORT_SYMBOL(end_writeback);
@@ -513,7 +529,7 @@ void evict_inodes(struct super_block *sb)
 		list_move(&inode->i_lru, &dispose);
 		list_del_init(&inode->i_wb_list);
 		if (!(inode->i_state & (I_DIRTY | I_SYNC)))
-			percpu_counter_dec(&nr_inodes_unused);
+			inodes_stat.nr_unused--;
 	}
 	spin_unlock(&inode_lock);
 
@@ -554,7 +570,7 @@ int invalidate_inodes(struct super_block *sb)
 		list_move(&inode->i_lru, &dispose);
 		list_del_init(&inode->i_wb_list);
 		if (!(inode->i_state & (I_DIRTY | I_SYNC)))
-			percpu_counter_dec(&nr_inodes_unused);
+			inodes_stat.nr_unused--;
 	}
 	spin_unlock(&inode_lock);
 
@@ -616,7 +632,7 @@ static void prune_icache(int nr_to_scan)
 		if (atomic_read(&inode->i_count) ||
 		    (inode->i_state & ~I_REFERENCED)) {
 			list_del_init(&inode->i_lru);
-			percpu_counter_dec(&nr_inodes_unused);
+			inodes_stat.nr_unused--;
 			continue;
 		}
 
@@ -650,7 +666,7 @@ static void prune_icache(int nr_to_scan)
 		 */
 		list_move(&inode->i_lru, &freeable);
 		list_del_init(&inode->i_wb_list);
-		percpu_counter_dec(&nr_inodes_unused);
+		inodes_stat.nr_unused--;
 	}
 	if (current_is_kswapd())
 		__count_vm_events(KSWAPD_INODESTEAL, reap);
@@ -1648,8 +1664,6 @@ void __init inode_init(void)
 					 SLAB_MEM_SPREAD),
 					 init_once);
 	register_shrinker(&icache_shrinker);
-	percpu_counter_init(&nr_inodes, 0);
-	percpu_counter_init(&nr_inodes_unused, 0);
 
 	/* Hash may have been set up in inode_init_early */
 	if (!hashdist)
diff --git a/fs/internal.h b/fs/internal.h
index e43b9a4dbf4..9687c2ee273 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -63,6 +63,7 @@ extern int copy_mount_string(const void __user *, char **);
 
 extern void free_vfsmnt(struct vfsmount *);
 extern struct vfsmount *alloc_vfsmnt(const char *);
+extern unsigned int mnt_get_count(struct vfsmount *mnt);
 extern struct vfsmount *__lookup_mnt(struct vfsmount *, struct dentry *, int);
 extern void mnt_set_mountpoint(struct vfsmount *, struct dentry *,
 				struct vfsmount *);
diff --git a/fs/ioctl.c b/fs/ioctl.c
index e92fdbb3bc3..d6cc1647662 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -6,7 +6,6 @@
 
 #include <linux/syscalls.h>
 #include <linux/mm.h>
-#include <linux/smp_lock.h>
 #include <linux/capability.h>
 #include <linux/file.h>
 #include <linux/fs.h>
@@ -530,41 +529,6 @@ static int ioctl_fsthaw(struct file *filp)
 	return thaw_super(sb);
 }
 
-static int ioctl_fstrim(struct file *filp, void __user *argp)
-{
-	struct super_block *sb = filp->f_path.dentry->d_inode->i_sb;
-	struct fstrim_range range;
-	int ret = 0;
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-	/* If filesystem doesn't support trim feature, return. */
-	if (sb->s_op->trim_fs == NULL)
-		return -EOPNOTSUPP;
-
-	/* If a blockdevice-backed filesystem isn't specified, return EINVAL. */
-	if (sb->s_bdev == NULL)
-		return -EINVAL;
-
-	if (argp == NULL) {
-		range.start = 0;
-		range.len = ULLONG_MAX;
-		range.minlen = 0;
-	} else if (copy_from_user(&range, argp, sizeof(range)))
-		return -EFAULT;
-
-	ret = sb->s_op->trim_fs(sb, &range);
-	if (ret < 0)
-		return ret;
-
-	if ((argp != NULL) &&
-	    (copy_to_user(argp, &range, sizeof(range))))
-		return -EFAULT;
-
-	return 0;
-}
-
 /*
  * When you add any new common ioctls to the switches above and below
  * please update compat_sys_ioctl() too.
@@ -615,10 +579,6 @@ int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
 		error = ioctl_fsthaw(filp);
 		break;
 
-	case FITRIM:
-		error = ioctl_fstrim(filp, argp);
-		break;
-
 	case FS_IOC_FIEMAP:
 		return ioctl_fiemap(filp, arg);
 
diff --git a/fs/ioprio.c b/fs/ioprio.c
index 748cfb92dcc..7da2a06508e 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -103,12 +103,7 @@ SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
 	}
 
 	ret = -ESRCH;
-	/*
-	 * We want IOPRIO_WHO_PGRP/IOPRIO_WHO_USER to be "atomic",
-	 * so we can't use rcu_read_lock(). See re-copy of ->ioprio
-	 * in copy_process().
-	 */
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	switch (which) {
 		case IOPRIO_WHO_PROCESS:
 			if (!who)
@@ -153,7 +148,7 @@ free_uid:
 			ret = -EINVAL;
 	}
 
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 	return ret;
 }
 
@@ -197,7 +192,7 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
 	int ret = -ESRCH;
 	int tmpio;
 
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	switch (which) {
 		case IOPRIO_WHO_PROCESS:
 			if (!who)
@@ -250,6 +245,6 @@ SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
 			ret = -EINVAL;
 	}
 
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 	return ret;
 }
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index bfdeb82a53b..844a7903c72 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -26,16 +26,32 @@
 
 #define BEQUIET
 
-static int isofs_hashi(struct dentry *parent, struct qstr *qstr);
-static int isofs_hash(struct dentry *parent, struct qstr *qstr);
-static int isofs_dentry_cmpi(struct dentry *dentry, struct qstr *a, struct qstr *b);
-static int isofs_dentry_cmp(struct dentry *dentry, struct qstr *a, struct qstr *b);
+static int isofs_hashi(const struct dentry *parent, const struct inode *inode,
+		struct qstr *qstr);
+static int isofs_hash(const struct dentry *parent, const struct inode *inode,
+		struct qstr *qstr);
+static int isofs_dentry_cmpi(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name);
+static int isofs_dentry_cmp(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name);
 
 #ifdef CONFIG_JOLIET
-static int isofs_hashi_ms(struct dentry *parent, struct qstr *qstr);
-static int isofs_hash_ms(struct dentry *parent, struct qstr *qstr);
-static int isofs_dentry_cmpi_ms(struct dentry *dentry, struct qstr *a, struct qstr *b);
-static int isofs_dentry_cmp_ms(struct dentry *dentry, struct qstr *a, struct qstr *b);
+static int isofs_hashi_ms(const struct dentry *parent, const struct inode *inode,
+		struct qstr *qstr);
+static int isofs_hash_ms(const struct dentry *parent, const struct inode *inode,
+		struct qstr *qstr);
+static int isofs_dentry_cmpi_ms(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name);
+static int isofs_dentry_cmp_ms(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name);
 #endif
 
 static void isofs_put_super(struct super_block *sb)
@@ -65,11 +81,18 @@ static struct inode *isofs_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void isofs_destroy_inode(struct inode *inode)
+static void isofs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(isofs_inode_cachep, ISOFS_I(inode));
 }
 
+static void isofs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, isofs_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct iso_inode_info *ei = foo;
@@ -160,7 +183,7 @@ struct iso9660_options{
  * Compute the hash for the isofs name corresponding to the dentry.
  */
 static int
-isofs_hash_common(struct dentry *dentry, struct qstr *qstr, int ms)
+isofs_hash_common(const struct dentry *dentry, struct qstr *qstr, int ms)
 {
 	const char *name;
 	int len;
@@ -181,7 +204,7 @@ isofs_hash_common(struct dentry *dentry, struct qstr *qstr, int ms)
  * Compute the hash for the isofs name corresponding to the dentry.
  */
 static int
-isofs_hashi_common(struct dentry *dentry, struct qstr *qstr, int ms)
+isofs_hashi_common(const struct dentry *dentry, struct qstr *qstr, int ms)
 {
 	const char *name;
 	int len;
@@ -206,100 +229,94 @@ isofs_hashi_common(struct dentry *dentry, struct qstr *qstr, int ms)
 }
 
 /*
- * Case insensitive compare of two isofs names.
- */
-static int isofs_dentry_cmpi_common(struct dentry *dentry, struct qstr *a,
-				struct qstr *b, int ms)
-{
-	int alen, blen;
-
-	/* A filename cannot end in '.' or we treat it like it has none */
-	alen = a->len;
-	blen = b->len;
-	if (ms) {
-		while (alen && a->name[alen-1] == '.')
-			alen--;
-		while (blen && b->name[blen-1] == '.')
-			blen--;
-	}
-	if (alen == blen) {
-		if (strnicmp(a->name, b->name, alen) == 0)
-			return 0;
-	}
-	return 1;
-}
-
-/*
- * Case sensitive compare of two isofs names.
+ * Compare of two isofs names.
  */
-static int isofs_dentry_cmp_common(struct dentry *dentry, struct qstr *a,
-					struct qstr *b, int ms)
+static int isofs_dentry_cmp_common(
+		unsigned int len, const char *str,
+		const struct qstr *name, int ms, int ci)
 {
 	int alen, blen;
 
 	/* A filename cannot end in '.' or we treat it like it has none */
-	alen = a->len;
-	blen = b->len;
+	alen = name->len;
+	blen = len;
 	if (ms) {
-		while (alen && a->name[alen-1] == '.')
+		while (alen && name->name[alen-1] == '.')
 			alen--;
-		while (blen && b->name[blen-1] == '.')
+		while (blen && str[blen-1] == '.')
 			blen--;
 	}
 	if (alen == blen) {
-		if (strncmp(a->name, b->name, alen) == 0)
-			return 0;
+		if (ci) {
+			if (strnicmp(name->name, str, alen) == 0)
+				return 0;
+		} else {
+			if (strncmp(name->name, str, alen) == 0)
+				return 0;
+		}
 	}
 	return 1;
 }
 
 static int
-isofs_hash(struct dentry *dentry, struct qstr *qstr)
+isofs_hash(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *qstr)
 {
 	return isofs_hash_common(dentry, qstr, 0);
 }
 
 static int
-isofs_hashi(struct dentry *dentry, struct qstr *qstr)
+isofs_hashi(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *qstr)
 {
 	return isofs_hashi_common(dentry, qstr, 0);
 }
 
 static int
-isofs_dentry_cmp(struct dentry *dentry,struct qstr *a,struct qstr *b)
+isofs_dentry_cmp(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	return isofs_dentry_cmp_common(dentry, a, b, 0);
+	return isofs_dentry_cmp_common(len, str, name, 0, 0);
 }
 
 static int
-isofs_dentry_cmpi(struct dentry *dentry,struct qstr *a,struct qstr *b)
+isofs_dentry_cmpi(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	return isofs_dentry_cmpi_common(dentry, a, b, 0);
+	return isofs_dentry_cmp_common(len, str, name, 0, 1);
 }
 
 #ifdef CONFIG_JOLIET
 static int
-isofs_hash_ms(struct dentry *dentry, struct qstr *qstr)
+isofs_hash_ms(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *qstr)
 {
 	return isofs_hash_common(dentry, qstr, 1);
 }
 
 static int
-isofs_hashi_ms(struct dentry *dentry, struct qstr *qstr)
+isofs_hashi_ms(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *qstr)
 {
 	return isofs_hashi_common(dentry, qstr, 1);
 }
 
 static int
-isofs_dentry_cmp_ms(struct dentry *dentry,struct qstr *a,struct qstr *b)
+isofs_dentry_cmp_ms(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	return isofs_dentry_cmp_common(dentry, a, b, 1);
+	return isofs_dentry_cmp_common(len, str, name, 1, 0);
 }
 
 static int
-isofs_dentry_cmpi_ms(struct dentry *dentry,struct qstr *a,struct qstr *b)
+isofs_dentry_cmpi_ms(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	return isofs_dentry_cmpi_common(dentry, a, b, 1);
+	return isofs_dentry_cmp_common(len, str, name, 1, 1);
 }
 #endif
 
@@ -932,7 +949,7 @@ root_found:
 		table += 2;
 	if (opt.check == 'r')
 		table++;
-	s->s_root->d_op = &isofs_dentry_ops[table];
+	d_set_d_op(s->s_root, &isofs_dentry_ops[table]);
 
 	kfree(opt.iocharset);
 
diff --git a/fs/isofs/namei.c b/fs/isofs/namei.c
index 0d23abfd428..679a849c3b2 100644
--- a/fs/isofs/namei.c
+++ b/fs/isofs/namei.c
@@ -37,7 +37,8 @@ isofs_cmp(struct dentry *dentry, const char *compare, int dlen)
 
 	qstr.name = compare;
 	qstr.len = dlen;
-	return dentry->d_op->d_compare(dentry, &dentry->d_name, &qstr);
+	return dentry->d_op->d_compare(NULL, NULL, NULL, NULL,
+			dentry->d_name.len, dentry->d_name.name, &qstr);
 }
 
 /*
@@ -171,7 +172,7 @@ struct dentry *isofs_lookup(struct inode *dir, struct dentry *dentry, struct nam
 	struct inode *inode;
 	struct page *page;
 
-	dentry->d_op = dir->i_sb->s_root->d_op;
+	d_set_d_op(dentry, dir->i_sb->s_root->d_op);
 
 	page = alloc_page(GFP_USER);
 	if (!page)
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index c590d155c09..f837ba95352 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -899,6 +899,14 @@ journal_t * jbd2_journal_init_dev(struct block_device *bdev,
 
 	/* journal descriptor can store up to n blocks -bzzz */
 	journal->j_blocksize = blocksize;
+	journal->j_dev = bdev;
+	journal->j_fs_dev = fs_dev;
+	journal->j_blk_offset = start;
+	journal->j_maxlen = len;
+	bdevname(journal->j_dev, journal->j_devname);
+	p = journal->j_devname;
+	while ((p = strchr(p, '/')))
+		*p = '!';
 	jbd2_stats_proc_init(journal);
 	n = journal->j_blocksize / sizeof(journal_block_tag_t);
 	journal->j_wbufsize = n;
@@ -908,14 +916,6 @@ journal_t * jbd2_journal_init_dev(struct block_device *bdev,
 			__func__);
 		goto out_err;
 	}
-	journal->j_dev = bdev;
-	journal->j_fs_dev = fs_dev;
-	journal->j_blk_offset = start;
-	journal->j_maxlen = len;
-	bdevname(journal->j_dev, journal->j_devname);
-	p = journal->j_devname;
-	while ((p = strchr(p, '/')))
-		*p = '!';
 
 	bh = __getblk(journal->j_dev, start, journal->j_blocksize);
 	if (!bh) {
diff --git a/fs/jffs2/acl.c b/fs/jffs2/acl.c
index 54a92fd02bb..95b79672150 100644
--- a/fs/jffs2/acl.c
+++ b/fs/jffs2/acl.c
@@ -259,11 +259,14 @@ static int jffs2_set_acl(struct inode *inode, int type, struct posix_acl *acl)
 	return rc;
 }
 
-int jffs2_check_acl(struct inode *inode, int mask)
+int jffs2_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
 	struct posix_acl *acl;
 	int rc;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	acl = jffs2_get_acl(inode, ACL_TYPE_ACCESS);
 	if (IS_ERR(acl))
 		return PTR_ERR(acl);
diff --git a/fs/jffs2/acl.h b/fs/jffs2/acl.h
index 5e42de8d954..3119f59253d 100644
--- a/fs/jffs2/acl.h
+++ b/fs/jffs2/acl.h
@@ -26,7 +26,7 @@ struct jffs2_acl_header {
 
 #ifdef CONFIG_JFFS2_FS_POSIX_ACL
 
-extern int jffs2_check_acl(struct inode *, int);
+extern int jffs2_check_acl(struct inode *, int, unsigned int);
 extern int jffs2_acl_chmod(struct inode *);
 extern int jffs2_init_acl_pre(struct inode *, struct inode *, int *);
 extern int jffs2_init_acl_post(struct inode *);
diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c
index c86041b866a..853b8e30008 100644
--- a/fs/jffs2/super.c
+++ b/fs/jffs2/super.c
@@ -40,11 +40,18 @@ static struct inode *jffs2_alloc_inode(struct super_block *sb)
 	return &f->vfs_inode;
 }
 
-static void jffs2_destroy_inode(struct inode *inode)
+static void jffs2_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(jffs2_inode_cachep, JFFS2_INODE_INFO(inode));
 }
 
+static void jffs2_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, jffs2_i_callback);
+}
+
 static void jffs2_i_init_once(void *foo)
 {
 	struct jffs2_inode_info *f = foo;
diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c
index 1057a4998e4..e5de9422fa3 100644
--- a/fs/jfs/acl.c
+++ b/fs/jfs/acl.c
@@ -114,10 +114,14 @@ out:
 	return rc;
 }
 
-int jfs_check_acl(struct inode *inode, int mask)
+int jfs_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
-	struct posix_acl *acl = jfs_get_acl(inode, ACL_TYPE_ACCESS);
+	struct posix_acl *acl;
+
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
 
+	acl = jfs_get_acl(inode, ACL_TYPE_ACCESS);
 	if (IS_ERR(acl))
 		return PTR_ERR(acl);
 	if (acl) {
diff --git a/fs/jfs/jfs_acl.h b/fs/jfs/jfs_acl.h
index 54e07559878..f9285c4900f 100644
--- a/fs/jfs/jfs_acl.h
+++ b/fs/jfs/jfs_acl.h
@@ -20,7 +20,7 @@
 
 #ifdef CONFIG_JFS_POSIX_ACL
 
-int jfs_check_acl(struct inode *, int);
+int jfs_check_acl(struct inode *, int, unsigned int flags);
 int jfs_init_acl(tid_t, struct inode *, struct inode *);
 int jfs_acl_chmod(struct inode *inode);
 
diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c
index 231ca4af9bc..4414e3a4226 100644
--- a/fs/jfs/namei.c
+++ b/fs/jfs/namei.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/fs.h>
+#include <linux/namei.h>
 #include <linux/ctype.h>
 #include <linux/quotaops.h>
 #include <linux/exportfs.h>
@@ -1465,7 +1466,7 @@ static struct dentry *jfs_lookup(struct inode *dip, struct dentry *dentry, struc
 	jfs_info("jfs_lookup: name = %s", name);
 
 	if (JFS_SBI(dip->i_sb)->mntflag & JFS_OS2)
-		dentry->d_op = &jfs_ci_dentry_operations;
+		d_set_d_op(dentry, &jfs_ci_dentry_operations);
 
 	if ((name[0] == '.') && (len == 1))
 		inum = dip->i_ino;
@@ -1494,7 +1495,7 @@ static struct dentry *jfs_lookup(struct inode *dip, struct dentry *dentry, struc
 	dentry = d_splice_alias(ip, dentry);
 
 	if (dentry && (JFS_SBI(dip->i_sb)->mntflag & JFS_OS2))
-		dentry->d_op = &jfs_ci_dentry_operations;
+		d_set_d_op(dentry, &jfs_ci_dentry_operations);
 
 	return dentry;
 }
@@ -1573,7 +1574,8 @@ const struct file_operations jfs_dir_operations = {
 	.llseek		= generic_file_llseek,
 };
 
-static int jfs_ci_hash(struct dentry *dir, struct qstr *this)
+static int jfs_ci_hash(const struct dentry *dir, const struct inode *inode,
+		struct qstr *this)
 {
 	unsigned long hash;
 	int i;
@@ -1586,32 +1588,63 @@ static int jfs_ci_hash(struct dentry *dir, struct qstr *this)
 	return 0;
 }
 
-static int jfs_ci_compare(struct dentry *dir, struct qstr *a, struct qstr *b)
+static int jfs_ci_compare(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
 	int i, result = 1;
 
-	if (a->len != b->len)
+	if (len != name->len)
 		goto out;
-	for (i=0; i < a->len; i++) {
-		if (tolower(a->name[i]) != tolower(b->name[i]))
+	for (i=0; i < len; i++) {
+		if (tolower(str[i]) != tolower(name->name[i]))
 			goto out;
 	}
 	result = 0;
+out:
+	return result;
+}
 
+static int jfs_ci_revalidate(struct dentry *dentry, struct nameidata *nd)
+{
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
 	/*
-	 * We want creates to preserve case.  A negative dentry, a, that
-	 * has a different case than b may cause a new entry to be created
-	 * with the wrong case.  Since we can't tell if a comes from a negative
-	 * dentry, we blindly replace it with b.  This should be harmless if
-	 * a is not a negative dentry.
+	 * This is not negative dentry. Always valid.
+	 *
+	 * Note, rename() to existing directory entry will have ->d_inode,
+	 * and will use existing name which isn't specified name by user.
+	 *
+	 * We may be able to drop this positive dentry here. But dropping
+	 * positive dentry isn't good idea. So it's unsupported like
+	 * rename("filename", "FILENAME") for now.
 	 */
-	memcpy((unsigned char *)a->name, b->name, a->len);
-out:
-	return result;
+	if (dentry->d_inode)
+		return 1;
+
+	/*
+	 * This may be nfsd (or something), anyway, we can't see the
+	 * intent of this. So, since this can be for creation, drop it.
+	 */
+	if (!nd)
+		return 0;
+
+	/*
+	 * Drop the negative dentry, in order to make sure to use the
+	 * case sensitive name which is specified by user if this is
+	 * for creation.
+	 */
+	if (!(nd->flags & (LOOKUP_CONTINUE | LOOKUP_PARENT))) {
+		if (nd->flags & (LOOKUP_CREATE | LOOKUP_RENAME_TARGET))
+			return 0;
+	}
+	return 1;
 }
 
 const struct dentry_operations jfs_ci_dentry_operations =
 {
 	.d_hash = jfs_ci_hash,
 	.d_compare = jfs_ci_compare,
+	.d_revalidate = jfs_ci_revalidate,
 };
diff --git a/fs/jfs/super.c b/fs/jfs/super.c
index 0669fc1cc3b..3150d766e0d 100644
--- a/fs/jfs/super.c
+++ b/fs/jfs/super.c
@@ -115,6 +115,14 @@ static struct inode *jfs_alloc_inode(struct super_block *sb)
 	return &jfs_inode->vfs_inode;
 }
 
+static void jfs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	struct jfs_inode_info *ji = JFS_IP(inode);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(jfs_inode_cachep, ji);
+}
+
 static void jfs_destroy_inode(struct inode *inode)
 {
 	struct jfs_inode_info *ji = JFS_IP(inode);
@@ -128,7 +136,7 @@ static void jfs_destroy_inode(struct inode *inode)
 		ji->active_ag = -1;
 	}
 	spin_unlock_irq(&ji->ag_lock);
-	kmem_cache_free(jfs_inode_cachep, ji);
+	call_rcu(&inode->i_rcu, jfs_i_callback);
 }
 
 static int jfs_statfs(struct dentry *dentry, struct kstatfs *buf)
@@ -517,7 +525,7 @@ static int jfs_fill_super(struct super_block *sb, void *data, int silent)
 		goto out_no_root;
 
 	if (sbi->mntflag & JFS_OS2)
-		sb->s_root->d_op = &jfs_ci_dentry_operations;
+		d_set_d_op(sb->s_root, &jfs_ci_dentry_operations);
 
 	/* logical blocks are represented by 40 bits in pxd_t, etc. */
 	sb->s_maxbytes = ((u64) sb->s_blocksize) << 40;
diff --git a/fs/libfs.c b/fs/libfs.c
index a3accdf528a..889311e3d06 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -16,6 +16,11 @@
 
 #include <asm/uaccess.h>
 
+static inline int simple_positive(struct dentry *dentry)
+{
+	return dentry->d_inode && !d_unhashed(dentry);
+}
+
 int simple_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		   struct kstat *stat)
 {
@@ -37,7 +42,7 @@ int simple_statfs(struct dentry *dentry, struct kstatfs *buf)
  * Retaining negative dentries for an in-memory filesystem just wastes
  * memory and lookup time: arrange for them to be deleted immediately.
  */
-static int simple_delete_dentry(struct dentry *dentry)
+static int simple_delete_dentry(const struct dentry *dentry)
 {
 	return 1;
 }
@@ -54,7 +59,7 @@ struct dentry *simple_lookup(struct inode *dir, struct dentry *dentry, struct na
 
 	if (dentry->d_name.len > NAME_MAX)
 		return ERR_PTR(-ENAMETOOLONG);
-	dentry->d_op = &simple_dentry_operations;
+	d_set_d_op(dentry, &simple_dentry_operations);
 	d_add(dentry, NULL);
 	return NULL;
 }
@@ -76,7 +81,8 @@ int dcache_dir_close(struct inode *inode, struct file *file)
 
 loff_t dcache_dir_lseek(struct file *file, loff_t offset, int origin)
 {
-	mutex_lock(&file->f_path.dentry->d_inode->i_mutex);
+	struct dentry *dentry = file->f_path.dentry;
+	mutex_lock(&dentry->d_inode->i_mutex);
 	switch (origin) {
 		case 1:
 			offset += file->f_pos;
@@ -84,7 +90,7 @@ loff_t dcache_dir_lseek(struct file *file, loff_t offset, int origin)
 			if (offset >= 0)
 				break;
 		default:
-			mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
+			mutex_unlock(&dentry->d_inode->i_mutex);
 			return -EINVAL;
 	}
 	if (offset != file->f_pos) {
@@ -94,21 +100,24 @@ loff_t dcache_dir_lseek(struct file *file, loff_t offset, int origin)
 			struct dentry *cursor = file->private_data;
 			loff_t n = file->f_pos - 2;
 
-			spin_lock(&dcache_lock);
+			spin_lock(&dentry->d_lock);
+			/* d_lock not required for cursor */
 			list_del(&cursor->d_u.d_child);
-			p = file->f_path.dentry->d_subdirs.next;
-			while (n && p != &file->f_path.dentry->d_subdirs) {
+			p = dentry->d_subdirs.next;
+			while (n && p != &dentry->d_subdirs) {
 				struct dentry *next;
 				next = list_entry(p, struct dentry, d_u.d_child);
-				if (!d_unhashed(next) && next->d_inode)
+				spin_lock_nested(&next->d_lock, DENTRY_D_LOCK_NESTED);
+				if (simple_positive(next))
 					n--;
+				spin_unlock(&next->d_lock);
 				p = p->next;
 			}
 			list_add_tail(&cursor->d_u.d_child, p);
-			spin_unlock(&dcache_lock);
+			spin_unlock(&dentry->d_lock);
 		}
 	}
-	mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
+	mutex_unlock(&dentry->d_inode->i_mutex);
 	return offset;
 }
 
@@ -148,29 +157,35 @@ int dcache_readdir(struct file * filp, void * dirent, filldir_t filldir)
 			i++;
 			/* fallthrough */
 		default:
-			spin_lock(&dcache_lock);
+			spin_lock(&dentry->d_lock);
 			if (filp->f_pos == 2)
 				list_move(q, &dentry->d_subdirs);
 
 			for (p=q->next; p != &dentry->d_subdirs; p=p->next) {
 				struct dentry *next;
 				next = list_entry(p, struct dentry, d_u.d_child);
-				if (d_unhashed(next) || !next->d_inode)
+				spin_lock_nested(&next->d_lock, DENTRY_D_LOCK_NESTED);
+				if (!simple_positive(next)) {
+					spin_unlock(&next->d_lock);
 					continue;
+				}
 
-				spin_unlock(&dcache_lock);
+				spin_unlock(&next->d_lock);
+				spin_unlock(&dentry->d_lock);
 				if (filldir(dirent, next->d_name.name, 
 					    next->d_name.len, filp->f_pos, 
 					    next->d_inode->i_ino, 
 					    dt_type(next->d_inode)) < 0)
 					return 0;
-				spin_lock(&dcache_lock);
+				spin_lock(&dentry->d_lock);
+				spin_lock_nested(&next->d_lock, DENTRY_D_LOCK_NESTED);
 				/* next is still alive */
 				list_move(q, p);
+				spin_unlock(&next->d_lock);
 				p = q;
 				filp->f_pos++;
 			}
-			spin_unlock(&dcache_lock);
+			spin_unlock(&dentry->d_lock);
 	}
 	return 0;
 }
@@ -259,23 +274,23 @@ int simple_link(struct dentry *old_dentry, struct inode *dir, struct dentry *den
 	return 0;
 }
 
-static inline int simple_positive(struct dentry *dentry)
-{
-	return dentry->d_inode && !d_unhashed(dentry);
-}
-
 int simple_empty(struct dentry *dentry)
 {
 	struct dentry *child;
 	int ret = 0;
 
-	spin_lock(&dcache_lock);
-	list_for_each_entry(child, &dentry->d_subdirs, d_u.d_child)
-		if (simple_positive(child))
+	spin_lock(&dentry->d_lock);
+	list_for_each_entry(child, &dentry->d_subdirs, d_u.d_child) {
+		spin_lock_nested(&child->d_lock, DENTRY_D_LOCK_NESTED);
+		if (simple_positive(child)) {
+			spin_unlock(&child->d_lock);
 			goto out;
+		}
+		spin_unlock(&child->d_lock);
+	}
 	ret = 1;
 out:
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dentry->d_lock);
 	return ret;
 }
 
diff --git a/fs/lockd/clntlock.c b/fs/lockd/clntlock.c
index d5bb86866e6..25509eb28fd 100644
--- a/fs/lockd/clntlock.c
+++ b/fs/lockd/clntlock.c
@@ -14,7 +14,6 @@
 #include <linux/sunrpc/clnt.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/lockd/lockd.h>
-#include <linux/smp_lock.h>
 #include <linux/kthread.h>
 
 #define NLMDBG_FACILITY		NLMDBG_CLIENT
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index 47ea1e1925b..332c54cf75e 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -7,7 +7,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 #include <linux/errno.h>
diff --git a/fs/lockd/host.c b/fs/lockd/host.c
index 25e21e4023b..ed0c59fe23c 100644
--- a/fs/lockd/host.c
+++ b/fs/lockd/host.c
@@ -124,7 +124,7 @@ static struct nlm_host *nlm_lookup_host(struct nlm_lookup_host_info *ni)
 			continue;
 		if (host->h_server != ni->server)
 			continue;
-		if (ni->server &&
+		if (ni->server && ni->src_len != 0 &&
 		    !rpc_cmp_addr(nlm_srcaddr(host), ni->src_sap))
 			continue;
 
@@ -167,6 +167,7 @@ static struct nlm_host *nlm_lookup_host(struct nlm_lookup_host_info *ni)
 	host->h_addrlen = ni->salen;
 	rpc_set_port(nlm_addr(host), 0);
 	memcpy(nlm_srcaddr(host), ni->src_sap, ni->src_len);
+	host->h_srcaddrlen = ni->src_len;
 	host->h_version    = ni->version;
 	host->h_proto      = ni->protocol;
 	host->h_rpcclnt    = NULL;
@@ -238,9 +239,6 @@ struct nlm_host *nlmclnt_lookup_host(const struct sockaddr *sap,
 				     const char *hostname,
 				     int noresvport)
 {
-	const struct sockaddr source = {
-		.sa_family	= AF_UNSPEC,
-	};
 	struct nlm_lookup_host_info ni = {
 		.server		= 0,
 		.sap		= sap,
@@ -249,8 +247,6 @@ struct nlm_host *nlmclnt_lookup_host(const struct sockaddr *sap,
 		.version	= version,
 		.hostname	= hostname,
 		.hostname_len	= strlen(hostname),
-		.src_sap	= &source,
-		.src_len	= sizeof(source),
 		.noresvport	= noresvport,
 	};
 
@@ -357,7 +353,6 @@ nlm_bind_host(struct nlm_host *host)
 			.protocol	= host->h_proto,
 			.address	= nlm_addr(host),
 			.addrsize	= host->h_addrlen,
-			.saddress	= nlm_srcaddr(host),
 			.timeout	= &timeparms,
 			.servername	= host->h_name,
 			.program	= &nlm_program,
@@ -376,6 +371,8 @@ nlm_bind_host(struct nlm_host *host)
 			args.flags |= RPC_CLNT_CREATE_HARDRTRY;
 		if (host->h_noresvport)
 			args.flags |= RPC_CLNT_CREATE_NONPRIVPORT;
+		if (host->h_srcaddrlen)
+			args.saddress = nlm_srcaddr(host);
 
 		clnt = rpc_create(&args);
 		if (!IS_ERR(clnt))
diff --git a/fs/lockd/svc4proc.c b/fs/lockd/svc4proc.c
index a336e832475..38d26119245 100644
--- a/fs/lockd/svc4proc.c
+++ b/fs/lockd/svc4proc.c
@@ -9,7 +9,6 @@
 
 #include <linux/types.h>
 #include <linux/time.h>
-#include <linux/smp_lock.h>
 #include <linux/lockd/lockd.h>
 #include <linux/lockd/share.h>
 
diff --git a/fs/lockd/svclock.c b/fs/lockd/svclock.c
index c462d346acb..ef5659b211e 100644
--- a/fs/lockd/svclock.c
+++ b/fs/lockd/svclock.c
@@ -25,7 +25,6 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/sunrpc/clnt.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/lockd/nlm.h>
diff --git a/fs/lockd/svcproc.c b/fs/lockd/svcproc.c
index c3069f38d60..0caea5310ac 100644
--- a/fs/lockd/svcproc.c
+++ b/fs/lockd/svcproc.c
@@ -9,7 +9,6 @@
 
 #include <linux/types.h>
 #include <linux/time.h>
-#include <linux/smp_lock.h>
 #include <linux/lockd/lockd.h>
 #include <linux/lockd/share.h>
 
diff --git a/fs/locks.c b/fs/locks.c
index 65765cb6afe..08415b2a6d3 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -122,7 +122,6 @@
 #include <linux/module.h>
 #include <linux/security.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/syscalls.h>
 #include <linux/time.h>
 #include <linux/rcupdate.h>
@@ -1390,7 +1389,7 @@ int generic_setlease(struct file *filp, long arg, struct file_lock **flp)
 		if ((arg == F_RDLCK) && (atomic_read(&inode->i_writecount) > 0))
 			goto out;
 		if ((arg == F_WRLCK)
-		    && ((atomic_read(&dentry->d_count) > 1)
+		    && ((dentry->d_count > 1)
 			|| (atomic_read(&inode->i_count) > 1)))
 			goto out;
 	}
@@ -1504,9 +1503,8 @@ static int do_fcntl_delete_lease(struct file *filp)
 
 static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
 {
-	struct file_lock *fl;
+	struct file_lock *fl, *ret;
 	struct fasync_struct *new;
-	struct inode *inode = filp->f_path.dentry->d_inode;
 	int error;
 
 	fl = lease_alloc(filp, arg);
@@ -1518,13 +1516,16 @@ static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
 		locks_free_lock(fl);
 		return -ENOMEM;
 	}
+	ret = fl;
 	lock_flocks();
-	error = __vfs_setlease(filp, arg, &fl);
+	error = __vfs_setlease(filp, arg, &ret);
 	if (error) {
 		unlock_flocks();
 		locks_free_lock(fl);
 		goto out_free_fasync;
 	}
+	if (ret != fl)
+		locks_free_lock(fl);
 
 	/*
 	 * fasync_insert_entry() returns the old entry if any.
@@ -1532,17 +1533,10 @@ static int do_fcntl_add_lease(unsigned int fd, struct file *filp, long arg)
 	 * inserted it into the fasync list. Clear new so that
 	 * we don't release it here.
 	 */
-	if (!fasync_insert_entry(fd, filp, &fl->fl_fasync, new))
+	if (!fasync_insert_entry(fd, filp, &ret->fl_fasync, new))
 		new = NULL;
 
-	if (error < 0) {
-		/* remove lease just inserted by setlease */
-		fl->fl_type = F_UNLCK | F_INPROGRESS;
-		fl->fl_break_time = jiffies - 10;
-		time_out_leases(inode);
-	} else {
-		error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
-	}
+	error = __f_setown(filp, task_pid(current), PIDTYPE_PID, 0);
 	unlock_flocks();
 
 out_free_fasync:
diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c
index 409dfd65e9a..f9ddf0c388c 100644
--- a/fs/logfs/dir.c
+++ b/fs/logfs/dir.c
@@ -555,9 +555,11 @@ static int logfs_symlink(struct inode *dir, struct dentry *dentry,
 	return __logfs_create(dir, dentry, inode, target, destlen);
 }
 
-static int logfs_permission(struct inode *inode, int mask)
+static int logfs_permission(struct inode *inode, int mask, unsigned int flags)
 {
-	return generic_permission(inode, mask, NULL);
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+	return generic_permission(inode, mask, flags, NULL);
 }
 
 static int logfs_link(struct dentry *old_dentry, struct inode *dir,
diff --git a/fs/logfs/inode.c b/fs/logfs/inode.c
index d8c71ece098..03b8c240aed 100644
--- a/fs/logfs/inode.c
+++ b/fs/logfs/inode.c
@@ -141,13 +141,20 @@ struct inode *logfs_safe_iget(struct super_block *sb, ino_t ino, int *is_cached)
 	return __logfs_iget(sb, ino);
 }
 
+static void logfs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(logfs_inode_cache, logfs_inode(inode));
+}
+
 static void __logfs_destroy_inode(struct inode *inode)
 {
 	struct logfs_inode *li = logfs_inode(inode);
 
 	BUG_ON(li->li_block);
 	list_del(&li->li_freeing_list);
-	kmem_cache_free(logfs_inode_cache, li);
+	call_rcu(&inode->i_rcu, logfs_i_callback);
 }
 
 static void logfs_destroy_inode(struct inode *inode)
diff --git a/fs/logfs/journal.c b/fs/logfs/journal.c
index f46ee8b0e13..9da29706f91 100644
--- a/fs/logfs/journal.c
+++ b/fs/logfs/journal.c
@@ -828,7 +828,7 @@ void do_logfs_journal_wl_pass(struct super_block *sb)
 		super->s_journal_seg[i] = segno;
 		super->s_journal_ec[i] = ec;
 		logfs_set_segment_reserved(sb, segno);
-		err = btree_insert32(head, segno, (void *)1, GFP_KERNEL);
+		err = btree_insert32(head, segno, (void *)1, GFP_NOFS);
 		BUG_ON(err); /* mempool should prevent this */
 		err = logfs_erase_segment(sb, segno, 1);
 		BUG_ON(err); /* FIXME: remount-ro would be nicer */
diff --git a/fs/logfs/readwrite.c b/fs/logfs/readwrite.c
index 6127baf0e18..ee99a9f5dfd 100644
--- a/fs/logfs/readwrite.c
+++ b/fs/logfs/readwrite.c
@@ -1994,6 +1994,9 @@ static int do_write_inode(struct inode *inode)
 
 	/* FIXME: transaction is part of logfs_block now.  Is that enough? */
 	err = logfs_write_buf(master_inode, page, 0);
+	if (err)
+		move_page_to_inode(inode, page);
+
 	logfs_put_write_page(page);
 	return err;
 }
diff --git a/fs/minix/inode.c b/fs/minix/inode.c
index fb2020858a3..ae0b83f476a 100644
--- a/fs/minix/inode.c
+++ b/fs/minix/inode.c
@@ -68,11 +68,18 @@ static struct inode *minix_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void minix_destroy_inode(struct inode *inode)
+static void minix_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(minix_inode_cachep, minix_i(inode));
 }
 
+static void minix_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, minix_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct minix_inode_info *ei = (struct minix_inode_info *) foo;
diff --git a/fs/minix/namei.c b/fs/minix/namei.c
index c0d35a3acce..1b9e07728a9 100644
--- a/fs/minix/namei.c
+++ b/fs/minix/namei.c
@@ -23,7 +23,7 @@ static struct dentry *minix_lookup(struct inode * dir, struct dentry *dentry, st
 	struct inode * inode = NULL;
 	ino_t ino;
 
-	dentry->d_op = dir->i_sb->s_root->d_op;
+	d_set_d_op(dentry, dir->i_sb->s_root->d_op);
 
 	if (dentry->d_name.len > minix_sb(dir->i_sb)->s_namelen)
 		return ERR_PTR(-ENAMETOOLONG);
diff --git a/fs/namei.c b/fs/namei.c
index 5362af9b737..19433cdba01 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -169,8 +169,8 @@ EXPORT_SYMBOL(putname);
 /*
  * This does basic POSIX ACL permission checking
  */
-static int acl_permission_check(struct inode *inode, int mask,
-		int (*check_acl)(struct inode *inode, int mask))
+static int acl_permission_check(struct inode *inode, int mask, unsigned int flags,
+		int (*check_acl)(struct inode *inode, int mask, unsigned int flags))
 {
 	umode_t			mode = inode->i_mode;
 
@@ -180,7 +180,7 @@ static int acl_permission_check(struct inode *inode, int mask,
 		mode >>= 6;
 	else {
 		if (IS_POSIXACL(inode) && (mode & S_IRWXG) && check_acl) {
-			int error = check_acl(inode, mask);
+			int error = check_acl(inode, mask, flags);
 			if (error != -EAGAIN)
 				return error;
 		}
@@ -198,25 +198,30 @@ static int acl_permission_check(struct inode *inode, int mask,
 }
 
 /**
- * generic_permission  -  check for access rights on a Posix-like filesystem
+ * generic_permission -  check for access rights on a Posix-like filesystem
  * @inode:	inode to check access rights for
  * @mask:	right to check for (%MAY_READ, %MAY_WRITE, %MAY_EXEC)
  * @check_acl:	optional callback to check for Posix ACLs
+ * @flags	IPERM_FLAG_ flags.
  *
  * Used to check for read/write/execute permissions on a file.
  * We use "fsuid" for this, letting us set arbitrary permissions
  * for filesystem access without changing the "normal" uids which
- * are used for other things..
+ * are used for other things.
+ *
+ * generic_permission is rcu-walk aware. It returns -ECHILD in case an rcu-walk
+ * request cannot be satisfied (eg. requires blocking or too much complexity).
+ * It would then be called again in ref-walk mode.
  */
-int generic_permission(struct inode *inode, int mask,
-		int (*check_acl)(struct inode *inode, int mask))
+int generic_permission(struct inode *inode, int mask, unsigned int flags,
+	int (*check_acl)(struct inode *inode, int mask, unsigned int flags))
 {
 	int ret;
 
 	/*
 	 * Do the basic POSIX ACL permission checks.
 	 */
-	ret = acl_permission_check(inode, mask, check_acl);
+	ret = acl_permission_check(inode, mask, flags, check_acl);
 	if (ret != -EACCES)
 		return ret;
 
@@ -271,9 +276,10 @@ int inode_permission(struct inode *inode, int mask)
 	}
 
 	if (inode->i_op->permission)
-		retval = inode->i_op->permission(inode, mask);
+		retval = inode->i_op->permission(inode, mask, 0);
 	else
-		retval = generic_permission(inode, mask, inode->i_op->check_acl);
+		retval = generic_permission(inode, mask, 0,
+				inode->i_op->check_acl);
 
 	if (retval)
 		return retval;
@@ -362,6 +368,18 @@ void path_get(struct path *path)
 EXPORT_SYMBOL(path_get);
 
 /**
+ * path_get_long - get a long reference to a path
+ * @path: path to get the reference to
+ *
+ * Given a path increment the reference count to the dentry and the vfsmount.
+ */
+void path_get_long(struct path *path)
+{
+	mntget_long(path->mnt);
+	dget(path->dentry);
+}
+
+/**
  * path_put - put a reference to a path
  * @path: path to put the reference to
  *
@@ -375,6 +393,185 @@ void path_put(struct path *path)
 EXPORT_SYMBOL(path_put);
 
 /**
+ * path_put_long - put a long reference to a path
+ * @path: path to put the reference to
+ *
+ * Given a path decrement the reference count to the dentry and the vfsmount.
+ */
+void path_put_long(struct path *path)
+{
+	dput(path->dentry);
+	mntput_long(path->mnt);
+}
+
+/**
+ * nameidata_drop_rcu - drop this nameidata out of rcu-walk
+ * @nd: nameidata pathwalk data to drop
+ * @Returns: 0 on success, -ECHLID on failure
+ *
+ * Path walking has 2 modes, rcu-walk and ref-walk (see
+ * Documentation/filesystems/path-lookup.txt). __drop_rcu* functions attempt
+ * to drop out of rcu-walk mode and take normal reference counts on dentries
+ * and vfsmounts to transition to rcu-walk mode. __drop_rcu* functions take
+ * refcounts at the last known good point before rcu-walk got stuck, so
+ * ref-walk may continue from there. If this is not successful (eg. a seqcount
+ * has changed), then failure is returned and path walk restarts from the
+ * beginning in ref-walk mode.
+ *
+ * nameidata_drop_rcu attempts to drop the current nd->path and nd->root into
+ * ref-walk. Must be called from rcu-walk context.
+ */
+static int nameidata_drop_rcu(struct nameidata *nd)
+{
+	struct fs_struct *fs = current->fs;
+	struct dentry *dentry = nd->path.dentry;
+
+	BUG_ON(!(nd->flags & LOOKUP_RCU));
+	if (nd->root.mnt) {
+		spin_lock(&fs->lock);
+		if (nd->root.mnt != fs->root.mnt ||
+				nd->root.dentry != fs->root.dentry)
+			goto err_root;
+	}
+	spin_lock(&dentry->d_lock);
+	if (!__d_rcu_to_refcount(dentry, nd->seq))
+		goto err;
+	BUG_ON(nd->inode != dentry->d_inode);
+	spin_unlock(&dentry->d_lock);
+	if (nd->root.mnt) {
+		path_get(&nd->root);
+		spin_unlock(&fs->lock);
+	}
+	mntget(nd->path.mnt);
+
+	rcu_read_unlock();
+	br_read_unlock(vfsmount_lock);
+	nd->flags &= ~LOOKUP_RCU;
+	return 0;
+err:
+	spin_unlock(&dentry->d_lock);
+err_root:
+	if (nd->root.mnt)
+		spin_unlock(&fs->lock);
+	return -ECHILD;
+}
+
+/* Try to drop out of rcu-walk mode if we were in it, otherwise do nothing.  */
+static inline int nameidata_drop_rcu_maybe(struct nameidata *nd)
+{
+	if (nd->flags & LOOKUP_RCU)
+		return nameidata_drop_rcu(nd);
+	return 0;
+}
+
+/**
+ * nameidata_dentry_drop_rcu - drop nameidata and dentry out of rcu-walk
+ * @nd: nameidata pathwalk data to drop
+ * @dentry: dentry to drop
+ * @Returns: 0 on success, -ECHLID on failure
+ *
+ * nameidata_dentry_drop_rcu attempts to drop the current nd->path and nd->root,
+ * and dentry into ref-walk. @dentry must be a path found by a do_lookup call on
+ * @nd. Must be called from rcu-walk context.
+ */
+static int nameidata_dentry_drop_rcu(struct nameidata *nd, struct dentry *dentry)
+{
+	struct fs_struct *fs = current->fs;
+	struct dentry *parent = nd->path.dentry;
+
+	BUG_ON(!(nd->flags & LOOKUP_RCU));
+	if (nd->root.mnt) {
+		spin_lock(&fs->lock);
+		if (nd->root.mnt != fs->root.mnt ||
+				nd->root.dentry != fs->root.dentry)
+			goto err_root;
+	}
+	spin_lock(&parent->d_lock);
+	spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
+	if (!__d_rcu_to_refcount(dentry, nd->seq))
+		goto err;
+	/*
+	 * If the sequence check on the child dentry passed, then the child has
+	 * not been removed from its parent. This means the parent dentry must
+	 * be valid and able to take a reference at this point.
+	 */
+	BUG_ON(!IS_ROOT(dentry) && dentry->d_parent != parent);
+	BUG_ON(!parent->d_count);
+	parent->d_count++;
+	spin_unlock(&dentry->d_lock);
+	spin_unlock(&parent->d_lock);
+	if (nd->root.mnt) {
+		path_get(&nd->root);
+		spin_unlock(&fs->lock);
+	}
+	mntget(nd->path.mnt);
+
+	rcu_read_unlock();
+	br_read_unlock(vfsmount_lock);
+	nd->flags &= ~LOOKUP_RCU;
+	return 0;
+err:
+	spin_unlock(&dentry->d_lock);
+	spin_unlock(&parent->d_lock);
+err_root:
+	if (nd->root.mnt)
+		spin_unlock(&fs->lock);
+	return -ECHILD;
+}
+
+/* Try to drop out of rcu-walk mode if we were in it, otherwise do nothing.  */
+static inline int nameidata_dentry_drop_rcu_maybe(struct nameidata *nd, struct dentry *dentry)
+{
+	if (nd->flags & LOOKUP_RCU)
+		return nameidata_dentry_drop_rcu(nd, dentry);
+	return 0;
+}
+
+/**
+ * nameidata_drop_rcu_last - drop nameidata ending path walk out of rcu-walk
+ * @nd: nameidata pathwalk data to drop
+ * @Returns: 0 on success, -ECHLID on failure
+ *
+ * nameidata_drop_rcu_last attempts to drop the current nd->path into ref-walk.
+ * nd->path should be the final element of the lookup, so nd->root is discarded.
+ * Must be called from rcu-walk context.
+ */
+static int nameidata_drop_rcu_last(struct nameidata *nd)
+{
+	struct dentry *dentry = nd->path.dentry;
+
+	BUG_ON(!(nd->flags & LOOKUP_RCU));
+	nd->flags &= ~LOOKUP_RCU;
+	nd->root.mnt = NULL;
+	spin_lock(&dentry->d_lock);
+	if (!__d_rcu_to_refcount(dentry, nd->seq))
+		goto err_unlock;
+	BUG_ON(nd->inode != dentry->d_inode);
+	spin_unlock(&dentry->d_lock);
+
+	mntget(nd->path.mnt);
+
+	rcu_read_unlock();
+	br_read_unlock(vfsmount_lock);
+
+	return 0;
+
+err_unlock:
+	spin_unlock(&dentry->d_lock);
+	rcu_read_unlock();
+	br_read_unlock(vfsmount_lock);
+	return -ECHILD;
+}
+
+/* Try to drop out of rcu-walk mode if we were in it, otherwise do nothing.  */
+static inline int nameidata_drop_rcu_last_maybe(struct nameidata *nd)
+{
+	if (likely(nd->flags & LOOKUP_RCU))
+		return nameidata_drop_rcu_last(nd);
+	return 0;
+}
+
+/**
  * release_open_intent - free up open intent resources
  * @nd: pointer to nameidata
  */
@@ -386,10 +583,26 @@ void release_open_intent(struct nameidata *nd)
 		fput(nd->intent.open.file);
 }
 
+static int d_revalidate(struct dentry *dentry, struct nameidata *nd)
+{
+	int status;
+
+	status = dentry->d_op->d_revalidate(dentry, nd);
+	if (status == -ECHILD) {
+		if (nameidata_dentry_drop_rcu(nd, dentry))
+			return status;
+		status = dentry->d_op->d_revalidate(dentry, nd);
+	}
+
+	return status;
+}
+
 static inline struct dentry *
 do_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	int status = dentry->d_op->d_revalidate(dentry, nd);
+	int status;
+
+	status = d_revalidate(dentry, nd);
 	if (unlikely(status <= 0)) {
 		/*
 		 * The dentry failed validation.
@@ -397,19 +610,36 @@ do_revalidate(struct dentry *dentry, struct nameidata *nd)
 		 * the dentry otherwise d_revalidate is asking us
 		 * to return a fail status.
 		 */
-		if (!status) {
+		if (status < 0) {
+			/* If we're in rcu-walk, we don't have a ref */
+			if (!(nd->flags & LOOKUP_RCU))
+				dput(dentry);
+			dentry = ERR_PTR(status);
+
+		} else {
+			/* Don't d_invalidate in rcu-walk mode */
+			if (nameidata_dentry_drop_rcu_maybe(nd, dentry))
+				return ERR_PTR(-ECHILD);
 			if (!d_invalidate(dentry)) {
 				dput(dentry);
 				dentry = NULL;
 			}
-		} else {
-			dput(dentry);
-			dentry = ERR_PTR(status);
 		}
 	}
 	return dentry;
 }
 
+static inline int need_reval_dot(struct dentry *dentry)
+{
+	if (likely(!(dentry->d_flags & DCACHE_OP_REVALIDATE)))
+		return 0;
+
+	if (likely(!(dentry->d_sb->s_type->fs_flags & FS_REVAL_DOT)))
+		return 0;
+
+	return 1;
+}
+
 /*
  * force_reval_path - force revalidation of a dentry
  *
@@ -433,13 +663,12 @@ force_reval_path(struct path *path, struct nameidata *nd)
 
 	/*
 	 * only check on filesystems where it's possible for the dentry to
-	 * become stale. It's assumed that if this flag is set then the
-	 * d_revalidate op will also be defined.
+	 * become stale.
 	 */
-	if (!(dentry->d_sb->s_type->fs_flags & FS_REVAL_DOT))
+	if (!need_reval_dot(dentry))
 		return 0;
 
-	status = dentry->d_op->d_revalidate(dentry, nd);
+	status = d_revalidate(dentry, nd);
 	if (status > 0)
 		return 0;
 
@@ -459,26 +688,27 @@ force_reval_path(struct path *path, struct nameidata *nd)
  * short-cut DAC fails, then call ->permission() to do more
  * complete permission check.
  */
-static int exec_permission(struct inode *inode)
+static inline int exec_permission(struct inode *inode, unsigned int flags)
 {
 	int ret;
 
 	if (inode->i_op->permission) {
-		ret = inode->i_op->permission(inode, MAY_EXEC);
-		if (!ret)
-			goto ok;
-		return ret;
+		ret = inode->i_op->permission(inode, MAY_EXEC, flags);
+	} else {
+		ret = acl_permission_check(inode, MAY_EXEC, flags,
+				inode->i_op->check_acl);
 	}
-	ret = acl_permission_check(inode, MAY_EXEC, inode->i_op->check_acl);
-	if (!ret)
+	if (likely(!ret))
 		goto ok;
+	if (ret == -ECHILD)
+		return ret;
 
 	if (capable(CAP_DAC_OVERRIDE) || capable(CAP_DAC_READ_SEARCH))
 		goto ok;
 
 	return ret;
 ok:
-	return security_inode_permission(inode, MAY_EXEC);
+	return security_inode_exec_permission(inode, flags);
 }
 
 static __always_inline void set_root(struct nameidata *nd)
@@ -489,8 +719,23 @@ static __always_inline void set_root(struct nameidata *nd)
 
 static int link_path_walk(const char *, struct nameidata *);
 
+static __always_inline void set_root_rcu(struct nameidata *nd)
+{
+	if (!nd->root.mnt) {
+		struct fs_struct *fs = current->fs;
+		unsigned seq;
+
+		do {
+			seq = read_seqcount_begin(&fs->seq);
+			nd->root = fs->root;
+		} while (read_seqcount_retry(&fs->seq, seq));
+	}
+}
+
 static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *link)
 {
+	int ret;
+
 	if (IS_ERR(link))
 		goto fail;
 
@@ -500,8 +745,10 @@ static __always_inline int __vfs_follow_link(struct nameidata *nd, const char *l
 		nd->path = nd->root;
 		path_get(&nd->root);
 	}
+	nd->inode = nd->path.dentry->d_inode;
 
-	return link_path_walk(link, nd);
+	ret = link_path_walk(link, nd);
+	return ret;
 fail:
 	path_put(&nd->path);
 	return PTR_ERR(link);
@@ -516,11 +763,12 @@ static void path_put_conditional(struct path *path, struct nameidata *nd)
 
 static inline void path_to_nameidata(struct path *path, struct nameidata *nd)
 {
-	dput(nd->path.dentry);
-	if (nd->path.mnt != path->mnt) {
-		mntput(nd->path.mnt);
-		nd->path.mnt = path->mnt;
+	if (!(nd->flags & LOOKUP_RCU)) {
+		dput(nd->path.dentry);
+		if (nd->path.mnt != path->mnt)
+			mntput(nd->path.mnt);
 	}
+	nd->path.mnt = path->mnt;
 	nd->path.dentry = path->dentry;
 }
 
@@ -535,9 +783,11 @@ __do_follow_link(struct path *path, struct nameidata *nd, void **p)
 
 	if (path->mnt != nd->path.mnt) {
 		path_to_nameidata(path, nd);
+		nd->inode = nd->path.dentry->d_inode;
 		dget(dentry);
 	}
 	mntget(path->mnt);
+
 	nd->last_type = LAST_BIND;
 	*p = dentry->d_inode->i_op->follow_link(dentry, nd);
 	error = PTR_ERR(*p);
@@ -591,6 +841,20 @@ loop:
 	return err;
 }
 
+static int follow_up_rcu(struct path *path)
+{
+	struct vfsmount *parent;
+	struct dentry *mountpoint;
+
+	parent = path->mnt->mnt_parent;
+	if (parent == path->mnt)
+		return 0;
+	mountpoint = path->mnt->mnt_mountpoint;
+	path->dentry = mountpoint;
+	path->mnt = parent;
+	return 1;
+}
+
 int follow_up(struct path *path)
 {
 	struct vfsmount *parent;
@@ -612,9 +876,24 @@ int follow_up(struct path *path)
 	return 1;
 }
 
-/* no need for dcache_lock, as serialization is taken care in
- * namespace.c
+/*
+ * serialization is taken care of in namespace.c
  */
+static void __follow_mount_rcu(struct nameidata *nd, struct path *path,
+				struct inode **inode)
+{
+	while (d_mountpoint(path->dentry)) {
+		struct vfsmount *mounted;
+		mounted = __lookup_mnt(path->mnt, path->dentry, 1);
+		if (!mounted)
+			return;
+		path->mnt = mounted;
+		path->dentry = mounted->mnt_root;
+		nd->seq = read_seqcount_begin(&path->dentry->d_seq);
+		*inode = path->dentry->d_inode;
+	}
+}
+
 static int __follow_mount(struct path *path)
 {
 	int res = 0;
@@ -645,9 +924,6 @@ static void follow_mount(struct path *path)
 	}
 }
 
-/* no need for dcache_lock, as serialization is taken care in
- * namespace.c
- */
 int follow_down(struct path *path)
 {
 	struct vfsmount *mounted;
@@ -663,7 +939,42 @@ int follow_down(struct path *path)
 	return 0;
 }
 
-static __always_inline void follow_dotdot(struct nameidata *nd)
+static int follow_dotdot_rcu(struct nameidata *nd)
+{
+	struct inode *inode = nd->inode;
+
+	set_root_rcu(nd);
+
+	while(1) {
+		if (nd->path.dentry == nd->root.dentry &&
+		    nd->path.mnt == nd->root.mnt) {
+			break;
+		}
+		if (nd->path.dentry != nd->path.mnt->mnt_root) {
+			struct dentry *old = nd->path.dentry;
+			struct dentry *parent = old->d_parent;
+			unsigned seq;
+
+			seq = read_seqcount_begin(&parent->d_seq);
+			if (read_seqcount_retry(&old->d_seq, nd->seq))
+				return -ECHILD;
+			inode = parent->d_inode;
+			nd->path.dentry = parent;
+			nd->seq = seq;
+			break;
+		}
+		if (!follow_up_rcu(&nd->path))
+			break;
+		nd->seq = read_seqcount_begin(&nd->path.dentry->d_seq);
+		inode = nd->path.dentry->d_inode;
+	}
+	__follow_mount_rcu(nd, &nd->path, &inode);
+	nd->inode = inode;
+
+	return 0;
+}
+
+static void follow_dotdot(struct nameidata *nd)
 {
 	set_root(nd);
 
@@ -684,6 +995,7 @@ static __always_inline void follow_dotdot(struct nameidata *nd)
 			break;
 	}
 	follow_mount(&nd->path);
+	nd->inode = nd->path.dentry->d_inode;
 }
 
 /*
@@ -721,17 +1033,17 @@ static struct dentry *d_alloc_and_lookup(struct dentry *parent,
  *  It _is_ time-critical.
  */
 static int do_lookup(struct nameidata *nd, struct qstr *name,
-		     struct path *path)
+			struct path *path, struct inode **inode)
 {
 	struct vfsmount *mnt = nd->path.mnt;
-	struct dentry *dentry, *parent;
+	struct dentry *dentry, *parent = nd->path.dentry;
 	struct inode *dir;
 	/*
 	 * See if the low-level filesystem might want
 	 * to use its own hash..
 	 */
-	if (nd->path.dentry->d_op && nd->path.dentry->d_op->d_hash) {
-		int err = nd->path.dentry->d_op->d_hash(nd->path.dentry, name);
+	if (unlikely(parent->d_flags & DCACHE_OP_HASH)) {
+		int err = parent->d_op->d_hash(parent, nd->inode, name);
 		if (err < 0)
 			return err;
 	}
@@ -741,21 +1053,44 @@ static int do_lookup(struct nameidata *nd, struct qstr *name,
 	 * of a false negative due to a concurrent rename, we're going to
 	 * do the non-racy lookup, below.
 	 */
-	dentry = __d_lookup(nd->path.dentry, name);
-	if (!dentry)
-		goto need_lookup;
+	if (nd->flags & LOOKUP_RCU) {
+		unsigned seq;
+
+		*inode = nd->inode;
+		dentry = __d_lookup_rcu(parent, name, &seq, inode);
+		if (!dentry) {
+			if (nameidata_drop_rcu(nd))
+				return -ECHILD;
+			goto need_lookup;
+		}
+		/* Memory barrier in read_seqcount_begin of child is enough */
+		if (__read_seqcount_retry(&parent->d_seq, nd->seq))
+			return -ECHILD;
+
+		nd->seq = seq;
+		if (dentry->d_flags & DCACHE_OP_REVALIDATE)
+			goto need_revalidate;
+		path->mnt = mnt;
+		path->dentry = dentry;
+		__follow_mount_rcu(nd, path, inode);
+	} else {
+		dentry = __d_lookup(parent, name);
+		if (!dentry)
+			goto need_lookup;
 found:
-	if (dentry->d_op && dentry->d_op->d_revalidate)
-		goto need_revalidate;
+		if (dentry->d_flags & DCACHE_OP_REVALIDATE)
+			goto need_revalidate;
 done:
-	path->mnt = mnt;
-	path->dentry = dentry;
-	__follow_mount(path);
+		path->mnt = mnt;
+		path->dentry = dentry;
+		__follow_mount(path);
+		*inode = path->dentry->d_inode;
+	}
 	return 0;
 
 need_lookup:
-	parent = nd->path.dentry;
 	dir = parent->d_inode;
+	BUG_ON(nd->inode != dir);
 
 	mutex_lock(&dir->i_mutex);
 	/*
@@ -817,7 +1152,6 @@ static inline int follow_on_final(struct inode *inode, unsigned lookup_flags)
 static int link_path_walk(const char *name, struct nameidata *nd)
 {
 	struct path next;
-	struct inode *inode;
 	int err;
 	unsigned int lookup_flags = nd->flags;
 	
@@ -826,18 +1160,28 @@ static int link_path_walk(const char *name, struct nameidata *nd)
 	if (!*name)
 		goto return_reval;
 
-	inode = nd->path.dentry->d_inode;
 	if (nd->depth)
 		lookup_flags = LOOKUP_FOLLOW | (nd->flags & LOOKUP_CONTINUE);
 
 	/* At this point we know we have a real path component. */
 	for(;;) {
+		struct inode *inode;
 		unsigned long hash;
 		struct qstr this;
 		unsigned int c;
 
 		nd->flags |= LOOKUP_CONTINUE;
-		err = exec_permission(inode);
+		if (nd->flags & LOOKUP_RCU) {
+			err = exec_permission(nd->inode, IPERM_FLAG_RCU);
+			if (err == -ECHILD) {
+				if (nameidata_drop_rcu(nd))
+					return -ECHILD;
+				goto exec_again;
+			}
+		} else {
+exec_again:
+			err = exec_permission(nd->inode, 0);
+		}
  		if (err)
 			break;
 
@@ -868,37 +1212,44 @@ static int link_path_walk(const char *name, struct nameidata *nd)
 		if (this.name[0] == '.') switch (this.len) {
 			default:
 				break;
-			case 2:	
+			case 2:
 				if (this.name[1] != '.')
 					break;
-				follow_dotdot(nd);
-				inode = nd->path.dentry->d_inode;
+				if (nd->flags & LOOKUP_RCU) {
+					if (follow_dotdot_rcu(nd))
+						return -ECHILD;
+				} else
+					follow_dotdot(nd);
 				/* fallthrough */
 			case 1:
 				continue;
 		}
 		/* This does the actual lookups.. */
-		err = do_lookup(nd, &this, &next);
+		err = do_lookup(nd, &this, &next, &inode);
 		if (err)
 			break;
-
 		err = -ENOENT;
-		inode = next.dentry->d_inode;
 		if (!inode)
 			goto out_dput;
 
 		if (inode->i_op->follow_link) {
+			/* We commonly drop rcu-walk here */
+			if (nameidata_dentry_drop_rcu_maybe(nd, next.dentry))
+				return -ECHILD;
+			BUG_ON(inode != next.dentry->d_inode);
 			err = do_follow_link(&next, nd);
 			if (err)
 				goto return_err;
+			nd->inode = nd->path.dentry->d_inode;
 			err = -ENOENT;
-			inode = nd->path.dentry->d_inode;
-			if (!inode)
+			if (!nd->inode)
 				break;
-		} else
+		} else {
 			path_to_nameidata(&next, nd);
+			nd->inode = inode;
+		}
 		err = -ENOTDIR; 
-		if (!inode->i_op->lookup)
+		if (!nd->inode->i_op->lookup)
 			break;
 		continue;
 		/* here ends the main loop */
@@ -913,32 +1264,39 @@ last_component:
 		if (this.name[0] == '.') switch (this.len) {
 			default:
 				break;
-			case 2:	
+			case 2:
 				if (this.name[1] != '.')
 					break;
-				follow_dotdot(nd);
-				inode = nd->path.dentry->d_inode;
+				if (nd->flags & LOOKUP_RCU) {
+					if (follow_dotdot_rcu(nd))
+						return -ECHILD;
+				} else
+					follow_dotdot(nd);
 				/* fallthrough */
 			case 1:
 				goto return_reval;
 		}
-		err = do_lookup(nd, &this, &next);
+		err = do_lookup(nd, &this, &next, &inode);
 		if (err)
 			break;
-		inode = next.dentry->d_inode;
 		if (follow_on_final(inode, lookup_flags)) {
+			if (nameidata_dentry_drop_rcu_maybe(nd, next.dentry))
+				return -ECHILD;
+			BUG_ON(inode != next.dentry->d_inode);
 			err = do_follow_link(&next, nd);
 			if (err)
 				goto return_err;
-			inode = nd->path.dentry->d_inode;
-		} else
+			nd->inode = nd->path.dentry->d_inode;
+		} else {
 			path_to_nameidata(&next, nd);
+			nd->inode = inode;
+		}
 		err = -ENOENT;
-		if (!inode)
+		if (!nd->inode)
 			break;
 		if (lookup_flags & LOOKUP_DIRECTORY) {
 			err = -ENOTDIR; 
-			if (!inode->i_op->lookup)
+			if (!nd->inode->i_op->lookup)
 				break;
 		}
 		goto return_base;
@@ -958,25 +1316,43 @@ return_reval:
 		 * We bypassed the ordinary revalidation routines.
 		 * We may need to check the cached dentry for staleness.
 		 */
-		if (nd->path.dentry && nd->path.dentry->d_sb &&
-		    (nd->path.dentry->d_sb->s_type->fs_flags & FS_REVAL_DOT)) {
-			err = -ESTALE;
+		if (need_reval_dot(nd->path.dentry)) {
 			/* Note: we do not d_invalidate() */
-			if (!nd->path.dentry->d_op->d_revalidate(
-					nd->path.dentry, nd))
+			err = d_revalidate(nd->path.dentry, nd);
+			if (!err)
+				err = -ESTALE;
+			if (err < 0)
 				break;
 		}
 return_base:
+		if (nameidata_drop_rcu_last_maybe(nd))
+			return -ECHILD;
 		return 0;
 out_dput:
-		path_put_conditional(&next, nd);
+		if (!(nd->flags & LOOKUP_RCU))
+			path_put_conditional(&next, nd);
 		break;
 	}
-	path_put(&nd->path);
+	if (!(nd->flags & LOOKUP_RCU))
+		path_put(&nd->path);
 return_err:
 	return err;
 }
 
+static inline int path_walk_rcu(const char *name, struct nameidata *nd)
+{
+	current->total_link_count = 0;
+
+	return link_path_walk(name, nd);
+}
+
+static inline int path_walk_simple(const char *name, struct nameidata *nd)
+{
+	current->total_link_count = 0;
+
+	return link_path_walk(name, nd);
+}
+
 static int path_walk(const char *name, struct nameidata *nd)
 {
 	struct path save = nd->path;
@@ -1002,6 +1378,93 @@ static int path_walk(const char *name, struct nameidata *nd)
 	return result;
 }
 
+static void path_finish_rcu(struct nameidata *nd)
+{
+	if (nd->flags & LOOKUP_RCU) {
+		/* RCU dangling. Cancel it. */
+		nd->flags &= ~LOOKUP_RCU;
+		nd->root.mnt = NULL;
+		rcu_read_unlock();
+		br_read_unlock(vfsmount_lock);
+	}
+	if (nd->file)
+		fput(nd->file);
+}
+
+static int path_init_rcu(int dfd, const char *name, unsigned int flags, struct nameidata *nd)
+{
+	int retval = 0;
+	int fput_needed;
+	struct file *file;
+
+	nd->last_type = LAST_ROOT; /* if there are only slashes... */
+	nd->flags = flags | LOOKUP_RCU;
+	nd->depth = 0;
+	nd->root.mnt = NULL;
+	nd->file = NULL;
+
+	if (*name=='/') {
+		struct fs_struct *fs = current->fs;
+		unsigned seq;
+
+		br_read_lock(vfsmount_lock);
+		rcu_read_lock();
+
+		do {
+			seq = read_seqcount_begin(&fs->seq);
+			nd->root = fs->root;
+			nd->path = nd->root;
+			nd->seq = __read_seqcount_begin(&nd->path.dentry->d_seq);
+		} while (read_seqcount_retry(&fs->seq, seq));
+
+	} else if (dfd == AT_FDCWD) {
+		struct fs_struct *fs = current->fs;
+		unsigned seq;
+
+		br_read_lock(vfsmount_lock);
+		rcu_read_lock();
+
+		do {
+			seq = read_seqcount_begin(&fs->seq);
+			nd->path = fs->pwd;
+			nd->seq = __read_seqcount_begin(&nd->path.dentry->d_seq);
+		} while (read_seqcount_retry(&fs->seq, seq));
+
+	} else {
+		struct dentry *dentry;
+
+		file = fget_light(dfd, &fput_needed);
+		retval = -EBADF;
+		if (!file)
+			goto out_fail;
+
+		dentry = file->f_path.dentry;
+
+		retval = -ENOTDIR;
+		if (!S_ISDIR(dentry->d_inode->i_mode))
+			goto fput_fail;
+
+		retval = file_permission(file, MAY_EXEC);
+		if (retval)
+			goto fput_fail;
+
+		nd->path = file->f_path;
+		if (fput_needed)
+			nd->file = file;
+
+		nd->seq = __read_seqcount_begin(&nd->path.dentry->d_seq);
+		br_read_lock(vfsmount_lock);
+		rcu_read_lock();
+	}
+	nd->inode = nd->path.dentry->d_inode;
+	return 0;
+
+fput_fail:
+	fput_light(file, fput_needed);
+out_fail:
+	return retval;
+}
+
 static int path_init(int dfd, const char *name, unsigned int flags, struct nameidata *nd)
 {
 	int retval = 0;
@@ -1042,6 +1505,7 @@ static int path_init(int dfd, const char *name, unsigned int flags, struct namei
 
 		fput_light(file, fput_needed);
 	}
+	nd->inode = nd->path.dentry->d_inode;
 	return 0;
 
 fput_fail:
@@ -1054,16 +1518,53 @@ out_fail:
 static int do_path_lookup(int dfd, const char *name,
 				unsigned int flags, struct nameidata *nd)
 {
-	int retval = path_init(dfd, name, flags, nd);
-	if (!retval)
-		retval = path_walk(name, nd);
-	if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
-				nd->path.dentry->d_inode))
-		audit_inode(name, nd->path.dentry);
+	int retval;
+
+	/*
+	 * Path walking is largely split up into 2 different synchronisation
+	 * schemes, rcu-walk and ref-walk (explained in
+	 * Documentation/filesystems/path-lookup.txt). These share much of the
+	 * path walk code, but some things particularly setup, cleanup, and
+	 * following mounts are sufficiently divergent that functions are
+	 * duplicated. Typically there is a function foo(), and its RCU
+	 * analogue, foo_rcu().
+	 *
+	 * -ECHILD is the error number of choice (just to avoid clashes) that
+	 * is returned if some aspect of an rcu-walk fails. Such an error must
+	 * be handled by restarting a traditional ref-walk (which will always
+	 * be able to complete).
+	 */
+	retval = path_init_rcu(dfd, name, flags, nd);
+	if (unlikely(retval))
+		return retval;
+	retval = path_walk_rcu(name, nd);
+	path_finish_rcu(nd);
 	if (nd->root.mnt) {
 		path_put(&nd->root);
 		nd->root.mnt = NULL;
 	}
+
+	if (unlikely(retval == -ECHILD || retval == -ESTALE)) {
+		/* slower, locked walk */
+		if (retval == -ESTALE)
+			flags |= LOOKUP_REVAL;
+		retval = path_init(dfd, name, flags, nd);
+		if (unlikely(retval))
+			return retval;
+		retval = path_walk(name, nd);
+		if (nd->root.mnt) {
+			path_put(&nd->root);
+			nd->root.mnt = NULL;
+		}
+	}
+
+	if (likely(!retval)) {
+		if (unlikely(!audit_dummy_context())) {
+			if (nd->path.dentry && nd->inode)
+				audit_inode(name, nd->path.dentry);
+		}
+	}
+
 	return retval;
 }
 
@@ -1106,10 +1607,11 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt,
 	path_get(&nd->path);
 	nd->root = nd->path;
 	path_get(&nd->root);
+	nd->inode = nd->path.dentry->d_inode;
 
 	retval = path_walk(name, nd);
 	if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry &&
-				nd->path.dentry->d_inode))
+				nd->inode))
 		audit_inode(name, nd->path.dentry);
 
 	path_put(&nd->root);
@@ -1125,7 +1627,7 @@ static struct dentry *__lookup_hash(struct qstr *name,
 	struct dentry *dentry;
 	int err;
 
-	err = exec_permission(inode);
+	err = exec_permission(inode, 0);
 	if (err)
 		return ERR_PTR(err);
 
@@ -1133,8 +1635,8 @@ static struct dentry *__lookup_hash(struct qstr *name,
 	 * See if the low-level filesystem might want
 	 * to use its own hash..
 	 */
-	if (base->d_op && base->d_op->d_hash) {
-		err = base->d_op->d_hash(base, name);
+	if (base->d_flags & DCACHE_OP_HASH) {
+		err = base->d_op->d_hash(base, inode, name);
 		dentry = ERR_PTR(err);
 		if (err < 0)
 			goto out;
@@ -1147,7 +1649,7 @@ static struct dentry *__lookup_hash(struct qstr *name,
 	 */
 	dentry = d_lookup(base, name);
 
-	if (dentry && dentry->d_op && dentry->d_op->d_revalidate)
+	if (dentry && (dentry->d_flags & DCACHE_OP_REVALIDATE))
 		dentry = do_revalidate(dentry, nd);
 
 	if (!dentry)
@@ -1490,6 +1992,7 @@ out_unlock:
 	mutex_unlock(&dir->d_inode->i_mutex);
 	dput(nd->path.dentry);
 	nd->path.dentry = path->dentry;
+
 	if (error)
 		return error;
 	/* Don't check for write permission, don't truncate */
@@ -1584,6 +2087,9 @@ exit:
 	return ERR_PTR(error);
 }
 
+/*
+ * Handle O_CREAT case for do_filp_open
+ */
 static struct file *do_last(struct nameidata *nd, struct path *path,
 			    int open_flag, int acc_mode,
 			    int mode, const char *pathname)
@@ -1597,50 +2103,25 @@ static struct file *do_last(struct nameidata *nd, struct path *path,
 		follow_dotdot(nd);
 		dir = nd->path.dentry;
 	case LAST_DOT:
-		if (nd->path.mnt->mnt_sb->s_type->fs_flags & FS_REVAL_DOT) {
-			if (!dir->d_op->d_revalidate(dir, nd)) {
+		if (need_reval_dot(dir)) {
+			error = d_revalidate(nd->path.dentry, nd);
+			if (!error)
 				error = -ESTALE;
+			if (error < 0)
 				goto exit;
-			}
 		}
 		/* fallthrough */
 	case LAST_ROOT:
-		if (open_flag & O_CREAT)
-			goto exit;
-		/* fallthrough */
+		goto exit;
 	case LAST_BIND:
 		audit_inode(pathname, dir);
 		goto ok;
 	}
 
 	/* trailing slashes? */
-	if (nd->last.name[nd->last.len]) {
-		if (open_flag & O_CREAT)
-			goto exit;
-		nd->flags |= LOOKUP_DIRECTORY | LOOKUP_FOLLOW;
-	}
-
-	/* just plain open? */
-	if (!(open_flag & O_CREAT)) {
-		error = do_lookup(nd, &nd->last, path);
-		if (error)
-			goto exit;
-		error = -ENOENT;
-		if (!path->dentry->d_inode)
-			goto exit_dput;
-		if (path->dentry->d_inode->i_op->follow_link)
-			return NULL;
-		error = -ENOTDIR;
-		if (nd->flags & LOOKUP_DIRECTORY) {
-			if (!path->dentry->d_inode->i_op->lookup)
-				goto exit_dput;
-		}
-		path_to_nameidata(path, nd);
-		audit_inode(pathname, nd->path.dentry);
-		goto ok;
-	}
+	if (nd->last.name[nd->last.len])
+		goto exit;
 
-	/* OK, it's O_CREAT */
 	mutex_lock(&dir->d_inode->i_mutex);
 
 	path->dentry = lookup_hash(nd);
@@ -1711,8 +2192,9 @@ static struct file *do_last(struct nameidata *nd, struct path *path,
 		return NULL;
 
 	path_to_nameidata(path, nd);
+	nd->inode = path->dentry->d_inode;
 	error = -EISDIR;
-	if (S_ISDIR(path->dentry->d_inode->i_mode))
+	if (S_ISDIR(nd->inode->i_mode))
 		goto exit;
 ok:
 	filp = finish_open(nd, open_flag, acc_mode);
@@ -1743,11 +2225,14 @@ struct file *do_filp_open(int dfd, const char *pathname,
 	struct path path;
 	int count = 0;
 	int flag = open_to_namei_flags(open_flag);
-	int force_reval = 0;
+	int flags;
 
 	if (!(open_flag & O_CREAT))
 		mode = 0;
 
+	/* Must never be set by userspace */
+	open_flag &= ~FMODE_NONOTIFY;
+
 	/*
 	 * O_SYNC is implemented as __O_SYNC|O_DSYNC.  As many places only
 	 * check for O_DSYNC if the need any syncing at all we enforce it's
@@ -1769,54 +2254,84 @@ struct file *do_filp_open(int dfd, const char *pathname,
 	if (open_flag & O_APPEND)
 		acc_mode |= MAY_APPEND;
 
-	/* find the parent */
-reval:
-	error = path_init(dfd, pathname, LOOKUP_PARENT, &nd);
+	flags = LOOKUP_OPEN;
+	if (open_flag & O_CREAT) {
+		flags |= LOOKUP_CREATE;
+		if (open_flag & O_EXCL)
+			flags |= LOOKUP_EXCL;
+	}
+	if (open_flag & O_DIRECTORY)
+		flags |= LOOKUP_DIRECTORY;
+	if (!(open_flag & O_NOFOLLOW))
+		flags |= LOOKUP_FOLLOW;
+
+	filp = get_empty_filp();
+	if (!filp)
+		return ERR_PTR(-ENFILE);
+
+	filp->f_flags = open_flag;
+	nd.intent.open.file = filp;
+	nd.intent.open.flags = flag;
+	nd.intent.open.create_mode = mode;
+
+	if (open_flag & O_CREAT)
+		goto creat;
+
+	/* !O_CREAT, simple open */
+	error = do_path_lookup(dfd, pathname, flags, &nd);
+	if (unlikely(error))
+		goto out_filp;
+	error = -ELOOP;
+	if (!(nd.flags & LOOKUP_FOLLOW)) {
+		if (nd.inode->i_op->follow_link)
+			goto out_path;
+	}
+	error = -ENOTDIR;
+	if (nd.flags & LOOKUP_DIRECTORY) {
+		if (!nd.inode->i_op->lookup)
+			goto out_path;
+	}
+	audit_inode(pathname, nd.path.dentry);
+	filp = finish_open(&nd, open_flag, acc_mode);
+	return filp;
+
+creat:
+	/* OK, have to create the file. Find the parent. */
+	error = path_init_rcu(dfd, pathname,
+			LOOKUP_PARENT | (flags & LOOKUP_REVAL), &nd);
 	if (error)
-		return ERR_PTR(error);
-	if (force_reval)
-		nd.flags |= LOOKUP_REVAL;
+		goto out_filp;
+	error = path_walk_rcu(pathname, &nd);
+	path_finish_rcu(&nd);
+	if (unlikely(error == -ECHILD || error == -ESTALE)) {
+		/* slower, locked walk */
+		if (error == -ESTALE) {
+reval:
+			flags |= LOOKUP_REVAL;
+		}
+		error = path_init(dfd, pathname,
+				LOOKUP_PARENT | (flags & LOOKUP_REVAL), &nd);
+		if (error)
+			goto out_filp;
 
-	current->total_link_count = 0;
-	error = link_path_walk(pathname, &nd);
-	if (error) {
-		filp = ERR_PTR(error);
-		goto out;
+		error = path_walk_simple(pathname, &nd);
 	}
-	if (unlikely(!audit_dummy_context()) && (open_flag & O_CREAT))
+	if (unlikely(error))
+		goto out_filp;
+	if (unlikely(!audit_dummy_context()))
 		audit_inode(pathname, nd.path.dentry);
 
 	/*
 	 * We have the parent and last component.
 	 */
-
-	error = -ENFILE;
-	filp = get_empty_filp();
-	if (filp == NULL)
-		goto exit_parent;
-	nd.intent.open.file = filp;
-	filp->f_flags = open_flag;
-	nd.intent.open.flags = flag;
-	nd.intent.open.create_mode = mode;
-	nd.flags &= ~LOOKUP_PARENT;
-	nd.flags |= LOOKUP_OPEN;
-	if (open_flag & O_CREAT) {
-		nd.flags |= LOOKUP_CREATE;
-		if (open_flag & O_EXCL)
-			nd.flags |= LOOKUP_EXCL;
-	}
-	if (open_flag & O_DIRECTORY)
-		nd.flags |= LOOKUP_DIRECTORY;
-	if (!(open_flag & O_NOFOLLOW))
-		nd.flags |= LOOKUP_FOLLOW;
+	nd.flags = flags;
 	filp = do_last(&nd, &path, open_flag, acc_mode, mode, pathname);
 	while (unlikely(!filp)) { /* trailing symlink */
 		struct path holder;
-		struct inode *inode = path.dentry->d_inode;
 		void *cookie;
 		error = -ELOOP;
 		/* S_ISDIR part is a temporary automount kludge */
-		if (!(nd.flags & LOOKUP_FOLLOW) && !S_ISDIR(inode->i_mode))
+		if (!(nd.flags & LOOKUP_FOLLOW) && !S_ISDIR(nd.inode->i_mode))
 			goto exit_dput;
 		if (count++ == 32)
 			goto exit_dput;
@@ -1837,36 +2352,33 @@ reval:
 			goto exit_dput;
 		error = __do_follow_link(&path, &nd, &cookie);
 		if (unlikely(error)) {
+			if (!IS_ERR(cookie) && nd.inode->i_op->put_link)
+				nd.inode->i_op->put_link(path.dentry, &nd, cookie);
 			/* nd.path had been dropped */
-			if (!IS_ERR(cookie) && inode->i_op->put_link)
-				inode->i_op->put_link(path.dentry, &nd, cookie);
-			path_put(&path);
-			release_open_intent(&nd);
-			filp = ERR_PTR(error);
-			goto out;
+			nd.path = path;
+			goto out_path;
 		}
 		holder = path;
 		nd.flags &= ~LOOKUP_PARENT;
 		filp = do_last(&nd, &path, open_flag, acc_mode, mode, pathname);
-		if (inode->i_op->put_link)
-			inode->i_op->put_link(holder.dentry, &nd, cookie);
+		if (nd.inode->i_op->put_link)
+			nd.inode->i_op->put_link(holder.dentry, &nd, cookie);
 		path_put(&holder);
 	}
 out:
 	if (nd.root.mnt)
 		path_put(&nd.root);
-	if (filp == ERR_PTR(-ESTALE) && !force_reval) {
-		force_reval = 1;
+	if (filp == ERR_PTR(-ESTALE) && !(flags & LOOKUP_REVAL))
 		goto reval;
-	}
 	return filp;
 
 exit_dput:
 	path_put_conditional(&path, &nd);
+out_path:
+	path_put(&nd.path);
+out_filp:
 	if (!IS_ERR(nd.intent.open.file))
 		release_open_intent(&nd);
-exit_parent:
-	path_put(&nd.path);
 	filp = ERR_PTR(error);
 	goto out;
 }
@@ -2127,12 +2639,10 @@ void dentry_unhash(struct dentry *dentry)
 {
 	dget(dentry);
 	shrink_dcache_parent(dentry);
-	spin_lock(&dcache_lock);
 	spin_lock(&dentry->d_lock);
-	if (atomic_read(&dentry->d_count) == 2)
+	if (dentry->d_count == 2)
 		__d_drop(dentry);
 	spin_unlock(&dentry->d_lock);
-	spin_unlock(&dcache_lock);
 }
 
 int vfs_rmdir(struct inode *dir, struct dentry *dentry)
diff --git a/fs/namespace.c b/fs/namespace.c
index 8a415c9c5e5..3ddfd9046c4 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -13,7 +13,6 @@
 #include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/percpu.h>
-#include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/acct.h>
@@ -139,6 +138,64 @@ void mnt_release_group_id(struct vfsmount *mnt)
 	mnt->mnt_group_id = 0;
 }
 
+/*
+ * vfsmount lock must be held for read
+ */
+static inline void mnt_add_count(struct vfsmount *mnt, int n)
+{
+#ifdef CONFIG_SMP
+	this_cpu_add(mnt->mnt_pcp->mnt_count, n);
+#else
+	preempt_disable();
+	mnt->mnt_count += n;
+	preempt_enable();
+#endif
+}
+
+static inline void mnt_set_count(struct vfsmount *mnt, int n)
+{
+#ifdef CONFIG_SMP
+	this_cpu_write(mnt->mnt_pcp->mnt_count, n);
+#else
+	mnt->mnt_count = n;
+#endif
+}
+
+/*
+ * vfsmount lock must be held for read
+ */
+static inline void mnt_inc_count(struct vfsmount *mnt)
+{
+	mnt_add_count(mnt, 1);
+}
+
+/*
+ * vfsmount lock must be held for read
+ */
+static inline void mnt_dec_count(struct vfsmount *mnt)
+{
+	mnt_add_count(mnt, -1);
+}
+
+/*
+ * vfsmount lock must be held for write
+ */
+unsigned int mnt_get_count(struct vfsmount *mnt)
+{
+#ifdef CONFIG_SMP
+	unsigned int count = atomic_read(&mnt->mnt_longrefs);
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		count += per_cpu_ptr(mnt->mnt_pcp, cpu)->mnt_count;
+	}
+
+	return count;
+#else
+	return mnt->mnt_count;
+#endif
+}
+
 struct vfsmount *alloc_vfsmnt(const char *name)
 {
 	struct vfsmount *mnt = kmem_cache_zalloc(mnt_cache, GFP_KERNEL);
@@ -155,7 +212,17 @@ struct vfsmount *alloc_vfsmnt(const char *name)
 				goto out_free_id;
 		}
 
-		atomic_set(&mnt->mnt_count, 1);
+#ifdef CONFIG_SMP
+		mnt->mnt_pcp = alloc_percpu(struct mnt_pcp);
+		if (!mnt->mnt_pcp)
+			goto out_free_devname;
+
+		atomic_set(&mnt->mnt_longrefs, 1);
+#else
+		mnt->mnt_count = 1;
+		mnt->mnt_writers = 0;
+#endif
+
 		INIT_LIST_HEAD(&mnt->mnt_hash);
 		INIT_LIST_HEAD(&mnt->mnt_child);
 		INIT_LIST_HEAD(&mnt->mnt_mounts);
@@ -167,13 +234,6 @@ struct vfsmount *alloc_vfsmnt(const char *name)
 #ifdef CONFIG_FSNOTIFY
 		INIT_HLIST_HEAD(&mnt->mnt_fsnotify_marks);
 #endif
-#ifdef CONFIG_SMP
-		mnt->mnt_writers = alloc_percpu(int);
-		if (!mnt->mnt_writers)
-			goto out_free_devname;
-#else
-		mnt->mnt_writers = 0;
-#endif
 	}
 	return mnt;
 
@@ -217,32 +277,32 @@ int __mnt_is_readonly(struct vfsmount *mnt)
 }
 EXPORT_SYMBOL_GPL(__mnt_is_readonly);
 
-static inline void inc_mnt_writers(struct vfsmount *mnt)
+static inline void mnt_inc_writers(struct vfsmount *mnt)
 {
 #ifdef CONFIG_SMP
-	(*per_cpu_ptr(mnt->mnt_writers, smp_processor_id()))++;
+	this_cpu_inc(mnt->mnt_pcp->mnt_writers);
 #else
 	mnt->mnt_writers++;
 #endif
 }
 
-static inline void dec_mnt_writers(struct vfsmount *mnt)
+static inline void mnt_dec_writers(struct vfsmount *mnt)
 {
 #ifdef CONFIG_SMP
-	(*per_cpu_ptr(mnt->mnt_writers, smp_processor_id()))--;
+	this_cpu_dec(mnt->mnt_pcp->mnt_writers);
 #else
 	mnt->mnt_writers--;
 #endif
 }
 
-static unsigned int count_mnt_writers(struct vfsmount *mnt)
+static unsigned int mnt_get_writers(struct vfsmount *mnt)
 {
 #ifdef CONFIG_SMP
 	unsigned int count = 0;
 	int cpu;
 
 	for_each_possible_cpu(cpu) {
-		count += *per_cpu_ptr(mnt->mnt_writers, cpu);
+		count += per_cpu_ptr(mnt->mnt_pcp, cpu)->mnt_writers;
 	}
 
 	return count;
@@ -274,9 +334,9 @@ int mnt_want_write(struct vfsmount *mnt)
 	int ret = 0;
 
 	preempt_disable();
-	inc_mnt_writers(mnt);
+	mnt_inc_writers(mnt);
 	/*
-	 * The store to inc_mnt_writers must be visible before we pass
+	 * The store to mnt_inc_writers must be visible before we pass
 	 * MNT_WRITE_HOLD loop below, so that the slowpath can see our
 	 * incremented count after it has set MNT_WRITE_HOLD.
 	 */
@@ -290,7 +350,7 @@ int mnt_want_write(struct vfsmount *mnt)
 	 */
 	smp_rmb();
 	if (__mnt_is_readonly(mnt)) {
-		dec_mnt_writers(mnt);
+		mnt_dec_writers(mnt);
 		ret = -EROFS;
 		goto out;
 	}
@@ -318,7 +378,7 @@ int mnt_clone_write(struct vfsmount *mnt)
 	if (__mnt_is_readonly(mnt))
 		return -EROFS;
 	preempt_disable();
-	inc_mnt_writers(mnt);
+	mnt_inc_writers(mnt);
 	preempt_enable();
 	return 0;
 }
@@ -352,7 +412,7 @@ EXPORT_SYMBOL_GPL(mnt_want_write_file);
 void mnt_drop_write(struct vfsmount *mnt)
 {
 	preempt_disable();
-	dec_mnt_writers(mnt);
+	mnt_dec_writers(mnt);
 	preempt_enable();
 }
 EXPORT_SYMBOL_GPL(mnt_drop_write);
@@ -385,7 +445,7 @@ static int mnt_make_readonly(struct vfsmount *mnt)
 	 * MNT_WRITE_HOLD, so it can't be decremented by another CPU while
 	 * we're counting up here.
 	 */
-	if (count_mnt_writers(mnt) > 0)
+	if (mnt_get_writers(mnt) > 0)
 		ret = -EBUSY;
 	else
 		mnt->mnt_flags |= MNT_READONLY;
@@ -419,7 +479,7 @@ void free_vfsmnt(struct vfsmount *mnt)
 	kfree(mnt->mnt_devname);
 	mnt_free_id(mnt);
 #ifdef CONFIG_SMP
-	free_percpu(mnt->mnt_writers);
+	free_percpu(mnt->mnt_pcp);
 #endif
 	kmem_cache_free(mnt_cache, mnt);
 }
@@ -493,6 +553,27 @@ static void __touch_mnt_namespace(struct mnt_namespace *ns)
 }
 
 /*
+ * Clear dentry's mounted state if it has no remaining mounts.
+ * vfsmount_lock must be held for write.
+ */
+static void dentry_reset_mounted(struct vfsmount *mnt, struct dentry *dentry)
+{
+	unsigned u;
+
+	for (u = 0; u < HASH_SIZE; u++) {
+		struct vfsmount *p;
+
+		list_for_each_entry(p, &mount_hashtable[u], mnt_hash) {
+			if (p->mnt_mountpoint == dentry)
+				return;
+		}
+	}
+	spin_lock(&dentry->d_lock);
+	dentry->d_flags &= ~DCACHE_MOUNTED;
+	spin_unlock(&dentry->d_lock);
+}
+
+/*
  * vfsmount lock must be held for write
  */
 static void detach_mnt(struct vfsmount *mnt, struct path *old_path)
@@ -503,7 +584,7 @@ static void detach_mnt(struct vfsmount *mnt, struct path *old_path)
 	mnt->mnt_mountpoint = mnt->mnt_root;
 	list_del_init(&mnt->mnt_child);
 	list_del_init(&mnt->mnt_hash);
-	old_path->dentry->d_mounted--;
+	dentry_reset_mounted(old_path->mnt, old_path->dentry);
 }
 
 /*
@@ -514,7 +595,9 @@ void mnt_set_mountpoint(struct vfsmount *mnt, struct dentry *dentry,
 {
 	child_mnt->mnt_parent = mntget(mnt);
 	child_mnt->mnt_mountpoint = dget(dentry);
-	dentry->d_mounted++;
+	spin_lock(&dentry->d_lock);
+	dentry->d_flags |= DCACHE_MOUNTED;
+	spin_unlock(&dentry->d_lock);
 }
 
 /*
@@ -630,9 +713,10 @@ static struct vfsmount *clone_mnt(struct vfsmount *old, struct dentry *root,
 	return NULL;
 }
 
-static inline void __mntput(struct vfsmount *mnt)
+static inline void mntfree(struct vfsmount *mnt)
 {
 	struct super_block *sb = mnt->mnt_sb;
+
 	/*
 	 * This probably indicates that somebody messed
 	 * up a mnt_want/drop_write() pair.  If this
@@ -640,38 +724,123 @@ static inline void __mntput(struct vfsmount *mnt)
 	 * to make r/w->r/o transitions.
 	 */
 	/*
-	 * atomic_dec_and_lock() used to deal with ->mnt_count decrements
-	 * provides barriers, so count_mnt_writers() below is safe.  AV
+	 * The locking used to deal with mnt_count decrement provides barriers,
+	 * so mnt_get_writers() below is safe.
 	 */
-	WARN_ON(count_mnt_writers(mnt));
+	WARN_ON(mnt_get_writers(mnt));
 	fsnotify_vfsmount_delete(mnt);
 	dput(mnt->mnt_root);
 	free_vfsmnt(mnt);
 	deactivate_super(sb);
 }
 
-void mntput_no_expire(struct vfsmount *mnt)
-{
-repeat:
-	if (atomic_add_unless(&mnt->mnt_count, -1, 1))
-		return;
+#ifdef CONFIG_SMP
+static inline void __mntput(struct vfsmount *mnt, int longrefs)
+{
+	if (!longrefs) {
+put_again:
+		br_read_lock(vfsmount_lock);
+		if (likely(atomic_read(&mnt->mnt_longrefs))) {
+			mnt_dec_count(mnt);
+			br_read_unlock(vfsmount_lock);
+			return;
+		}
+		br_read_unlock(vfsmount_lock);
+	} else {
+		BUG_ON(!atomic_read(&mnt->mnt_longrefs));
+		if (atomic_add_unless(&mnt->mnt_longrefs, -1, 1))
+			return;
+	}
+
 	br_write_lock(vfsmount_lock);
-	if (!atomic_dec_and_test(&mnt->mnt_count)) {
+	if (!longrefs)
+		mnt_dec_count(mnt);
+	else
+		atomic_dec(&mnt->mnt_longrefs);
+	if (mnt_get_count(mnt)) {
 		br_write_unlock(vfsmount_lock);
 		return;
 	}
-	if (likely(!mnt->mnt_pinned)) {
+	if (unlikely(mnt->mnt_pinned)) {
+		mnt_add_count(mnt, mnt->mnt_pinned + 1);
+		mnt->mnt_pinned = 0;
 		br_write_unlock(vfsmount_lock);
-		__mntput(mnt);
+		acct_auto_close_mnt(mnt);
+		goto put_again;
+	}
+	br_write_unlock(vfsmount_lock);
+	mntfree(mnt);
+}
+#else
+static inline void __mntput(struct vfsmount *mnt, int longrefs)
+{
+put_again:
+	mnt_dec_count(mnt);
+	if (likely(mnt_get_count(mnt)))
 		return;
+	br_write_lock(vfsmount_lock);
+	if (unlikely(mnt->mnt_pinned)) {
+		mnt_add_count(mnt, mnt->mnt_pinned + 1);
+		mnt->mnt_pinned = 0;
+		br_write_unlock(vfsmount_lock);
+		acct_auto_close_mnt(mnt);
+		goto put_again;
 	}
-	atomic_add(mnt->mnt_pinned + 1, &mnt->mnt_count);
-	mnt->mnt_pinned = 0;
 	br_write_unlock(vfsmount_lock);
-	acct_auto_close_mnt(mnt);
-	goto repeat;
+	mntfree(mnt);
+}
+#endif
+
+static void mntput_no_expire(struct vfsmount *mnt)
+{
+	__mntput(mnt, 0);
+}
+
+void mntput(struct vfsmount *mnt)
+{
+	if (mnt) {
+		/* avoid cacheline pingpong, hope gcc doesn't get "smart" */
+		if (unlikely(mnt->mnt_expiry_mark))
+			mnt->mnt_expiry_mark = 0;
+		__mntput(mnt, 0);
+	}
+}
+EXPORT_SYMBOL(mntput);
+
+struct vfsmount *mntget(struct vfsmount *mnt)
+{
+	if (mnt)
+		mnt_inc_count(mnt);
+	return mnt;
 }
-EXPORT_SYMBOL(mntput_no_expire);
+EXPORT_SYMBOL(mntget);
+
+void mntput_long(struct vfsmount *mnt)
+{
+#ifdef CONFIG_SMP
+	if (mnt) {
+		/* avoid cacheline pingpong, hope gcc doesn't get "smart" */
+		if (unlikely(mnt->mnt_expiry_mark))
+			mnt->mnt_expiry_mark = 0;
+		__mntput(mnt, 1);
+	}
+#else
+	mntput(mnt);
+#endif
+}
+EXPORT_SYMBOL(mntput_long);
+
+struct vfsmount *mntget_long(struct vfsmount *mnt)
+{
+#ifdef CONFIG_SMP
+	if (mnt)
+		atomic_inc(&mnt->mnt_longrefs);
+	return mnt;
+#else
+	return mntget(mnt);
+#endif
+}
+EXPORT_SYMBOL(mntget_long);
 
 void mnt_pin(struct vfsmount *mnt)
 {
@@ -679,19 +848,17 @@ void mnt_pin(struct vfsmount *mnt)
 	mnt->mnt_pinned++;
 	br_write_unlock(vfsmount_lock);
 }
-
 EXPORT_SYMBOL(mnt_pin);
 
 void mnt_unpin(struct vfsmount *mnt)
 {
 	br_write_lock(vfsmount_lock);
 	if (mnt->mnt_pinned) {
-		atomic_inc(&mnt->mnt_count);
+		mnt_inc_count(mnt);
 		mnt->mnt_pinned--;
 	}
 	br_write_unlock(vfsmount_lock);
 }
-
 EXPORT_SYMBOL(mnt_unpin);
 
 static inline void mangle(struct seq_file *m, const char *s)
@@ -986,12 +1153,13 @@ int may_umount_tree(struct vfsmount *mnt)
 	int minimum_refs = 0;
 	struct vfsmount *p;
 
-	br_read_lock(vfsmount_lock);
+	/* write lock needed for mnt_get_count */
+	br_write_lock(vfsmount_lock);
 	for (p = mnt; p; p = next_mnt(p, mnt)) {
-		actual_refs += atomic_read(&p->mnt_count);
+		actual_refs += mnt_get_count(p);
 		minimum_refs += 2;
 	}
-	br_read_unlock(vfsmount_lock);
+	br_write_unlock(vfsmount_lock);
 
 	if (actual_refs > minimum_refs)
 		return 0;
@@ -1018,10 +1186,10 @@ int may_umount(struct vfsmount *mnt)
 {
 	int ret = 1;
 	down_read(&namespace_sem);
-	br_read_lock(vfsmount_lock);
+	br_write_lock(vfsmount_lock);
 	if (propagate_mount_busy(mnt, 2))
 		ret = 0;
-	br_read_unlock(vfsmount_lock);
+	br_write_unlock(vfsmount_lock);
 	up_read(&namespace_sem);
 	return ret;
 }
@@ -1048,7 +1216,7 @@ void release_mounts(struct list_head *head)
 			dput(dentry);
 			mntput(m);
 		}
-		mntput(mnt);
+		mntput_long(mnt);
 	}
 }
 
@@ -1074,7 +1242,7 @@ void umount_tree(struct vfsmount *mnt, int propagate, struct list_head *kill)
 		list_del_init(&p->mnt_child);
 		if (p->mnt_parent != p) {
 			p->mnt_parent->mnt_ghosts++;
-			p->mnt_mountpoint->d_mounted--;
+			dentry_reset_mounted(p->mnt_parent, p->mnt_mountpoint);
 		}
 		change_mnt_propagation(p, MS_PRIVATE);
 	}
@@ -1103,8 +1271,16 @@ static int do_umount(struct vfsmount *mnt, int flags)
 		    flags & (MNT_FORCE | MNT_DETACH))
 			return -EINVAL;
 
-		if (atomic_read(&mnt->mnt_count) != 2)
+		/*
+		 * probably don't strictly need the lock here if we examined
+		 * all race cases, but it's a slowpath.
+		 */
+		br_write_lock(vfsmount_lock);
+		if (mnt_get_count(mnt) != 2) {
+			br_write_lock(vfsmount_lock);
 			return -EBUSY;
+		}
+		br_write_unlock(vfsmount_lock);
 
 		if (!xchg(&mnt->mnt_expiry_mark, 1))
 			return -EAGAIN;
@@ -1793,7 +1969,7 @@ int do_add_mount(struct vfsmount *newmnt, struct path *path,
 
 unlock:
 	up_write(&namespace_sem);
-	mntput(newmnt);
+	mntput_long(newmnt);
 	return err;
 }
 
@@ -2126,11 +2302,11 @@ static struct mnt_namespace *dup_mnt_ns(struct mnt_namespace *mnt_ns,
 		if (fs) {
 			if (p == fs->root.mnt) {
 				rootmnt = p;
-				fs->root.mnt = mntget(q);
+				fs->root.mnt = mntget_long(q);
 			}
 			if (p == fs->pwd.mnt) {
 				pwdmnt = p;
-				fs->pwd.mnt = mntget(q);
+				fs->pwd.mnt = mntget_long(q);
 			}
 		}
 		p = next_mnt(p, mnt_ns->root);
@@ -2139,9 +2315,9 @@ static struct mnt_namespace *dup_mnt_ns(struct mnt_namespace *mnt_ns,
 	up_write(&namespace_sem);
 
 	if (rootmnt)
-		mntput(rootmnt);
+		mntput_long(rootmnt);
 	if (pwdmnt)
-		mntput(pwdmnt);
+		mntput_long(pwdmnt);
 
 	return new_ns;
 }
@@ -2328,6 +2504,7 @@ SYSCALL_DEFINE2(pivot_root, const char __user *, new_root,
 	touch_mnt_namespace(current->nsproxy->mnt_ns);
 	br_write_unlock(vfsmount_lock);
 	chroot_fs_refs(&root, &new);
+
 	error = 0;
 	path_put(&root_parent);
 	path_put(&parent_path);
@@ -2354,6 +2531,7 @@ static void __init init_mount_tree(void)
 	mnt = do_kern_mount("rootfs", 0, "rootfs", NULL);
 	if (IS_ERR(mnt))
 		panic("Can't create rootfs");
+
 	ns = create_mnt_ns(mnt);
 	if (IS_ERR(ns))
 		panic("Can't allocate initial namespace");
diff --git a/fs/ncpfs/dir.c b/fs/ncpfs/dir.c
index aac8832e919..28f136d4aae 100644
--- a/fs/ncpfs/dir.c
+++ b/fs/ncpfs/dir.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
+#include <linux/namei.h>
 #include <asm/uaccess.h>
 #include <asm/byteorder.h>
-#include <linux/smp_lock.h>
 
 #include <linux/ncp_fs.h>
 
@@ -75,9 +75,12 @@ const struct inode_operations ncp_dir_inode_operations =
  * Dentry operations routines
  */
 static int ncp_lookup_validate(struct dentry *, struct nameidata *);
-static int ncp_hash_dentry(struct dentry *, struct qstr *);
-static int ncp_compare_dentry (struct dentry *, struct qstr *, struct qstr *);
-static int ncp_delete_dentry(struct dentry *);
+static int ncp_hash_dentry(const struct dentry *, const struct inode *,
+		struct qstr *);
+static int ncp_compare_dentry(const struct dentry *, const struct inode *,
+		const struct dentry *, const struct inode *,
+		unsigned int, const char *, const struct qstr *);
+static int ncp_delete_dentry(const struct dentry *);
 
 static const struct dentry_operations ncp_dentry_operations =
 {
@@ -114,10 +117,10 @@ static inline int ncp_preserve_entry_case(struct inode *i, __u32 nscreator)
 
 #define ncp_preserve_case(i)	(ncp_namespace(i) != NW_NS_DOS)
 
-static inline int ncp_case_sensitive(struct dentry *dentry)
+static inline int ncp_case_sensitive(const struct inode *i)
 {
 #ifdef CONFIG_NCPFS_NFS_NS
-	return ncp_namespace(dentry->d_inode) == NW_NS_NFS;
+	return ncp_namespace(i) == NW_NS_NFS;
 #else
 	return 0;
 #endif /* CONFIG_NCPFS_NFS_NS */
@@ -128,14 +131,16 @@ static inline int ncp_case_sensitive(struct dentry *dentry)
  * is case-sensitive.
  */
 static int 
-ncp_hash_dentry(struct dentry *dentry, struct qstr *this)
+ncp_hash_dentry(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *this)
 {
-	if (!ncp_case_sensitive(dentry)) {
+	if (!ncp_case_sensitive(inode)) {
+		struct super_block *sb = dentry->d_sb;
 		struct nls_table *t;
 		unsigned long hash;
 		int i;
 
-		t = NCP_IO_TABLE(dentry);
+		t = NCP_IO_TABLE(sb);
 		hash = init_name_hash();
 		for (i=0; i<this->len ; i++)
 			hash = partial_name_hash(ncp_tolower(t, this->name[i]),
@@ -146,15 +151,17 @@ ncp_hash_dentry(struct dentry *dentry, struct qstr *this)
 }
 
 static int
-ncp_compare_dentry(struct dentry *dentry, struct qstr *a, struct qstr *b)
+ncp_compare_dentry(const struct dentry *parent, const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	if (a->len != b->len)
+	if (len != name->len)
 		return 1;
 
-	if (ncp_case_sensitive(dentry))
-		return strncmp(a->name, b->name, a->len);
+	if (ncp_case_sensitive(pinode))
+		return strncmp(str, name->name, len);
 
-	return ncp_strnicmp(NCP_IO_TABLE(dentry), a->name, b->name, a->len);
+	return ncp_strnicmp(NCP_IO_TABLE(pinode->i_sb), str, name->name, len);
 }
 
 /*
@@ -163,7 +170,7 @@ ncp_compare_dentry(struct dentry *dentry, struct qstr *a, struct qstr *b)
  * Closing files can be safely postponed until iput() - it's done there anyway.
  */
 static int
-ncp_delete_dentry(struct dentry * dentry)
+ncp_delete_dentry(const struct dentry * dentry)
 {
 	struct inode *inode = dentry->d_inode;
 
@@ -302,6 +309,9 @@ ncp_lookup_validate(struct dentry *dentry, struct nameidata *nd)
 	int res, val = 0, len;
 	__u8 __name[NCP_MAXPATHLEN + 1];
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
 	parent = dget_parent(dentry);
 	dir = parent->d_inode;
 
@@ -385,21 +395,21 @@ ncp_dget_fpos(struct dentry *dentry, struct dentry *parent, unsigned long fpos)
 	}
 
 	/* If a pointer is invalid, we search the dentry. */
-	spin_lock(&dcache_lock);
+	spin_lock(&parent->d_lock);
 	next = parent->d_subdirs.next;
 	while (next != &parent->d_subdirs) {
 		dent = list_entry(next, struct dentry, d_u.d_child);
 		if ((unsigned long)dent->d_fsdata == fpos) {
 			if (dent->d_inode)
-				dget_locked(dent);
+				dget(dent);
 			else
 				dent = NULL;
-			spin_unlock(&dcache_lock);
+			spin_unlock(&parent->d_lock);
 			goto out;
 		}
 		next = next->next;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&parent->d_lock);
 	return NULL;
 
 out:
@@ -593,7 +603,7 @@ ncp_fill_cache(struct file *filp, void *dirent, filldir_t filldir,
 	qname.hash = full_name_hash(qname.name, qname.len);
 
 	if (dentry->d_op && dentry->d_op->d_hash)
-		if (dentry->d_op->d_hash(dentry, &qname) != 0)
+		if (dentry->d_op->d_hash(dentry, dentry->d_inode, &qname) != 0)
 			goto end_advance;
 
 	newdent = d_lookup(dentry, &qname);
@@ -612,35 +622,12 @@ ncp_fill_cache(struct file *filp, void *dirent, filldir_t filldir,
 			shrink_dcache_parent(newdent);
 
 		/*
-		 * It is not as dangerous as it looks.  NetWare's OS2 namespace is
-		 * case preserving yet case insensitive.  So we update dentry's name
-		 * as received from server.  We found dentry via d_lookup with our
-		 * hash, so we know that hash does not change, and so replacing name
-		 * should be reasonably safe.
+		 * NetWare's OS2 namespace is case preserving yet case
+		 * insensitive.  So we update dentry's name as received from
+		 * server. Parent dir's i_mutex is locked because we're in
+		 * readdir.
 		 */
-		if (qname.len == newdent->d_name.len &&
-		    memcmp(newdent->d_name.name, qname.name, newdent->d_name.len)) {
-			struct inode *inode = newdent->d_inode;
-
-			/*
-			 * Inside ncpfs all uses of d_name are either for debugging,
-			 * or on functions which acquire inode mutex (mknod, creat,
-			 * lookup).  So grab i_mutex here, to be sure.  d_path
-			 * uses dcache_lock when generating path, so we should too.
-			 * And finally d_compare is protected by dentry's d_lock, so
-			 * here we go.
-			 */
-			if (inode)
-				mutex_lock(&inode->i_mutex);
-			spin_lock(&dcache_lock);
-			spin_lock(&newdent->d_lock);
-			memcpy((char *) newdent->d_name.name, qname.name,
-								newdent->d_name.len);
-			spin_unlock(&newdent->d_lock);
-			spin_unlock(&dcache_lock);
-			if (inode)
-				mutex_unlock(&inode->i_mutex);
-		}
+		dentry_update_name_case(newdent, &qname);
 	}
 
 	if (!newdent->d_inode) {
@@ -650,7 +637,7 @@ ncp_fill_cache(struct file *filp, void *dirent, filldir_t filldir,
 		entry->ino = iunique(dir->i_sb, 2);
 		inode = ncp_iget(dir->i_sb, entry);
 		if (inode) {
-			newdent->d_op = &ncp_dentry_operations;
+			d_set_d_op(newdent, &ncp_dentry_operations);
 			d_instantiate(newdent, inode);
 			if (!hashed)
 				d_rehash(newdent);
@@ -658,7 +645,7 @@ ncp_fill_cache(struct file *filp, void *dirent, filldir_t filldir,
 	} else {
 		struct inode *inode = newdent->d_inode;
 
-		mutex_lock(&inode->i_mutex);
+		mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
 		ncp_update_inode2(inode, entry);
 		mutex_unlock(&inode->i_mutex);
 	}
@@ -906,7 +893,7 @@ static struct dentry *ncp_lookup(struct inode *dir, struct dentry *dentry, struc
 	if (inode) {
 		ncp_new_dentry(dentry);
 add_entry:
-		dentry->d_op = &ncp_dentry_operations;
+		d_set_d_op(dentry, &ncp_dentry_operations);
 		d_add(dentry, inode);
 		error = 0;
 	}
diff --git a/fs/ncpfs/file.c b/fs/ncpfs/file.c
index 6c754f70c52..cb50aaf981d 100644
--- a/fs/ncpfs/file.c
+++ b/fs/ncpfs/file.c
@@ -17,7 +17,6 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 
 #include <linux/ncp_fs.h>
 #include "ncplib_kernel.h"
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index d290545aa0c..9b39a5dd413 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -26,10 +26,10 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/vfs.h>
 #include <linux/mount.h>
 #include <linux/seq_file.h>
+#include <linux/namei.h>
 
 #include <linux/ncp_fs.h>
 
@@ -59,11 +59,18 @@ static struct inode *ncp_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void ncp_destroy_inode(struct inode *inode)
+static void ncp_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(ncp_inode_cachep, NCP_FINFO(inode));
 }
 
+static void ncp_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, ncp_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct ncp_inode_info *ei = (struct ncp_inode_info *) foo;
@@ -310,7 +317,12 @@ static void ncp_stop_tasks(struct ncp_server *server) {
 	sk->sk_write_space  = server->write_space;
 	release_sock(sk);
 	del_timer_sync(&server->timeout_tm);
-	flush_scheduled_work();
+
+	flush_work_sync(&server->rcv.tq);
+	if (sk->sk_socket->type == SOCK_STREAM)
+		flush_work_sync(&server->tx.tq);
+	else
+		flush_work_sync(&server->timeout_tq);
 }
 
 static int  ncp_show_options(struct seq_file *seq, struct vfsmount *mnt)
@@ -711,7 +723,7 @@ static int ncp_fill_super(struct super_block *sb, void *raw_data, int silent)
 	sb->s_root = d_alloc_root(root_inode);
         if (!sb->s_root)
 		goto out_no_root;
-	sb->s_root->d_op = &ncp_root_dentry_operations;
+	d_set_d_op(sb->s_root, &ncp_root_dentry_operations);
 	return 0;
 
 out_no_root:
diff --git a/fs/ncpfs/ioctl.c b/fs/ncpfs/ioctl.c
index c2a1f9a155c..d40a547e337 100644
--- a/fs/ncpfs/ioctl.c
+++ b/fs/ncpfs/ioctl.c
@@ -17,7 +17,6 @@
 #include <linux/mount.h>
 #include <linux/slab.h>
 #include <linux/highuid.h>
-#include <linux/smp_lock.h>
 #include <linux/vmalloc.h>
 #include <linux/sched.h>
 
diff --git a/fs/ncpfs/ncplib_kernel.h b/fs/ncpfs/ncplib_kernel.h
index 3c57eca634c..1220df75ff2 100644
--- a/fs/ncpfs/ncplib_kernel.h
+++ b/fs/ncpfs/ncplib_kernel.h
@@ -135,7 +135,7 @@ int ncp__vol2io(struct ncp_server *, unsigned char *, unsigned int *,
 				const unsigned char *, unsigned int, int);
 
 #define NCP_ESC			':'
-#define NCP_IO_TABLE(dentry)	(NCP_SERVER((dentry)->d_inode)->nls_io)
+#define NCP_IO_TABLE(sb)	(NCP_SBP(sb)->nls_io)
 #define ncp_tolower(t, c)	nls_tolower(t, c)
 #define ncp_toupper(t, c)	nls_toupper(t, c)
 #define ncp_strnicmp(t, s1, s2, len) \
@@ -150,15 +150,15 @@ int ncp__io2vol(unsigned char *, unsigned int *,
 int ncp__vol2io(unsigned char *, unsigned int *,
 				const unsigned char *, unsigned int, int);
 
-#define NCP_IO_TABLE(dentry)	NULL
+#define NCP_IO_TABLE(sb)	NULL
 #define ncp_tolower(t, c)	tolower(c)
 #define ncp_toupper(t, c)	toupper(c)
 #define ncp_io2vol(S,m,i,n,k,U)	ncp__io2vol(m,i,n,k,U)
 #define ncp_vol2io(S,m,i,n,k,U)	ncp__vol2io(m,i,n,k,U)
 
 
-static inline int ncp_strnicmp(struct nls_table *t, const unsigned char *s1,
-		const unsigned char *s2, int len)
+static inline int ncp_strnicmp(const struct nls_table *t,
+		const unsigned char *s1, const unsigned char *s2, int len)
 {
 	while (len--) {
 		if (tolower(*s1++) != tolower(*s2++))
@@ -193,7 +193,7 @@ ncp_renew_dentries(struct dentry *parent)
 	struct list_head *next;
 	struct dentry *dentry;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&parent->d_lock);
 	next = parent->d_subdirs.next;
 	while (next != &parent->d_subdirs) {
 		dentry = list_entry(next, struct dentry, d_u.d_child);
@@ -205,7 +205,7 @@ ncp_renew_dentries(struct dentry *parent)
 
 		next = next->next;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&parent->d_lock);
 }
 
 static inline void
@@ -215,7 +215,7 @@ ncp_invalidate_dircache_entries(struct dentry *parent)
 	struct list_head *next;
 	struct dentry *dentry;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&parent->d_lock);
 	next = parent->d_subdirs.next;
 	while (next != &parent->d_subdirs) {
 		dentry = list_entry(next, struct dentry, d_u.d_child);
@@ -223,7 +223,7 @@ ncp_invalidate_dircache_entries(struct dentry *parent)
 		ncp_age_dentry(server, dentry);
 		next = next->next;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&parent->d_lock);
 }
 
 struct ncp_cache_head {
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index aeec017fe81..93a8b3bd69e 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -9,7 +9,6 @@
 #include <linux/completion.h>
 #include <linux/ip.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/sunrpc/svc.h>
 #include <linux/sunrpc/svcsock.h>
 #include <linux/nfs_fs.h>
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 232a7eead33..1fd62fc49be 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 
 #include <linux/nfs4.h>
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 07ac3847e56..d33da530097 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -34,6 +34,7 @@
 #include <linux/mount.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
+#include <linux/kmemleak.h>
 
 #include "delegation.h"
 #include "iostat.h"
@@ -56,7 +57,7 @@ static int nfs_rename(struct inode *, struct dentry *,
 		      struct inode *, struct dentry *);
 static int nfs_fsync_dir(struct file *, int);
 static loff_t nfs_llseek_dir(struct file *, loff_t, int);
-static int nfs_readdir_clear_array(struct page*, gfp_t);
+static void nfs_readdir_clear_array(struct page*);
 
 const struct file_operations nfs_dir_operations = {
 	.llseek		= nfs_llseek_dir,
@@ -82,8 +83,8 @@ const struct inode_operations nfs_dir_inode_operations = {
 	.setattr	= nfs_setattr,
 };
 
-const struct address_space_operations nfs_dir_addr_space_ops = {
-	.releasepage = nfs_readdir_clear_array,
+const struct address_space_operations nfs_dir_aops = {
+	.freepage = nfs_readdir_clear_array,
 };
 
 #ifdef CONFIG_NFS_V3
@@ -161,6 +162,7 @@ struct nfs_cache_array_entry {
 	u64 cookie;
 	u64 ino;
 	struct qstr string;
+	unsigned char d_type;
 };
 
 struct nfs_cache_array {
@@ -170,14 +172,13 @@ struct nfs_cache_array {
 	struct nfs_cache_array_entry array[0];
 };
 
-#define MAX_READDIR_ARRAY ((PAGE_SIZE - sizeof(struct nfs_cache_array)) / sizeof(struct nfs_cache_array_entry))
-
 typedef __be32 * (*decode_dirent_t)(struct xdr_stream *, struct nfs_entry *, struct nfs_server *, int);
 typedef struct {
 	struct file	*file;
 	struct page	*page;
 	unsigned long	page_index;
 	u64		*dir_cookie;
+	u64		last_cookie;
 	loff_t		current_index;
 	decode_dirent_t	decode;
 
@@ -194,9 +195,13 @@ typedef struct {
 static
 struct nfs_cache_array *nfs_readdir_get_array(struct page *page)
 {
+	void *ptr;
 	if (page == NULL)
 		return ERR_PTR(-EIO);
-	return (struct nfs_cache_array *)kmap(page);
+	ptr = kmap(page);
+	if (ptr == NULL)
+		return ERR_PTR(-ENOMEM);
+	return ptr;
 }
 
 static
@@ -209,14 +214,15 @@ void nfs_readdir_release_array(struct page *page)
  * we are freeing strings created by nfs_add_to_readdir_array()
  */
 static
-int nfs_readdir_clear_array(struct page *page, gfp_t mask)
+void nfs_readdir_clear_array(struct page *page)
 {
-	struct nfs_cache_array *array = nfs_readdir_get_array(page);
+	struct nfs_cache_array *array;
 	int i;
+
+	array = kmap_atomic(page, KM_USER0);
 	for (i = 0; i < array->size; i++)
 		kfree(array->array[i].string.name);
-	nfs_readdir_release_array(page);
-	return 0;
+	kunmap_atomic(array, KM_USER0);
 }
 
 /*
@@ -231,6 +237,11 @@ int nfs_readdir_make_qstr(struct qstr *string, const char *name, unsigned int le
 	string->name = kmemdup(name, len, GFP_KERNEL);
 	if (string->name == NULL)
 		return -ENOMEM;
+	/*
+	 * Avoid a kmemleak false positive. The pointer to the name is stored
+	 * in a page cache page which kmemleak does not scan.
+	 */
+	kmemleak_not_leak(string->name);
 	string->hash = full_name_hash(name, len);
 	return 0;
 }
@@ -244,20 +255,24 @@ int nfs_readdir_add_to_array(struct nfs_entry *entry, struct page *page)
 
 	if (IS_ERR(array))
 		return PTR_ERR(array);
-	ret = -EIO;
-	if (array->size >= MAX_READDIR_ARRAY)
-		goto out;
 
 	cache_entry = &array->array[array->size];
+
+	/* Check that this entry lies within the page bounds */
+	ret = -ENOSPC;
+	if ((char *)&cache_entry[1] - (char *)page_address(page) > PAGE_SIZE)
+		goto out;
+
 	cache_entry->cookie = entry->prev_cookie;
 	cache_entry->ino = entry->ino;
+	cache_entry->d_type = entry->d_type;
 	ret = nfs_readdir_make_qstr(&cache_entry->string, entry->name, entry->len);
 	if (ret)
 		goto out;
 	array->last_cookie = entry->cookie;
-	if (entry->eof == 1)
-		array->eof_index = array->size;
 	array->size++;
+	if (entry->eof != 0)
+		array->eof_index = array->size;
 out:
 	nfs_readdir_release_array(page);
 	return ret;
@@ -272,7 +287,7 @@ int nfs_readdir_search_for_pos(struct nfs_cache_array *array, nfs_readdir_descri
 	if (diff < 0)
 		goto out_eof;
 	if (diff >= array->size) {
-		if (array->eof_index > 0)
+		if (array->eof_index >= 0)
 			goto out_eof;
 		desc->current_index += array->size;
 		return -EAGAIN;
@@ -281,8 +296,6 @@ int nfs_readdir_search_for_pos(struct nfs_cache_array *array, nfs_readdir_descri
 	index = (unsigned int)diff;
 	*desc->dir_cookie = array->array[index].cookie;
 	desc->cache_entry_index = index;
-	if (index == array->eof_index)
-		desc->eof = 1;
 	return 0;
 out_eof:
 	desc->eof = 1;
@@ -296,17 +309,16 @@ int nfs_readdir_search_for_cookie(struct nfs_cache_array *array, nfs_readdir_des
 	int status = -EAGAIN;
 
 	for (i = 0; i < array->size; i++) {
-		if (i == array->eof_index) {
-			desc->eof = 1;
-			status = -EBADCOOKIE;
-		}
 		if (array->array[i].cookie == *desc->dir_cookie) {
 			desc->cache_entry_index = i;
-			status = 0;
-			break;
+			return 0;
 		}
 	}
-
+	if (array->eof_index >= 0) {
+		status = -EBADCOOKIE;
+		if (*desc->dir_cookie == array->last_cookie)
+			desc->eof = 1;
+	}
 	return status;
 }
 
@@ -314,10 +326,7 @@ static
 int nfs_readdir_search_array(nfs_readdir_descriptor_t *desc)
 {
 	struct nfs_cache_array *array;
-	int status = -EBADCOOKIE;
-
-	if (desc->dir_cookie == NULL)
-		goto out;
+	int status;
 
 	array = nfs_readdir_get_array(desc->page);
 	if (IS_ERR(array)) {
@@ -330,6 +339,10 @@ int nfs_readdir_search_array(nfs_readdir_descriptor_t *desc)
 	else
 		status = nfs_readdir_search_for_cookie(array, desc);
 
+	if (status == -EAGAIN) {
+		desc->last_cookie = array->last_cookie;
+		desc->page_index++;
+	}
 	nfs_readdir_release_array(desc->page);
 out:
 	return status;
@@ -381,13 +394,9 @@ int xdr_decode(nfs_readdir_descriptor_t *desc, struct nfs_entry *entry, struct x
 static
 int nfs_same_file(struct dentry *dentry, struct nfs_entry *entry)
 {
-	struct nfs_inode *node;
 	if (dentry->d_inode == NULL)
 		goto different;
-	node = NFS_I(dentry->d_inode);
-	if (node->fh.size != entry->fh->size)
-		goto different;
-	if (strncmp(node->fh.data, entry->fh->data, node->fh.size) != 0)
+	if (nfs_compare_fh(entry->fh, NFS_FH(dentry->d_inode)) != 0)
 		goto different;
 	return 1;
 different:
@@ -429,7 +438,7 @@ void nfs_prime_dcache(struct dentry *parent, struct nfs_entry *entry)
 	if (dentry == NULL)
 		return;
 
-	dentry->d_op = NFS_PROTO(dir)->dentry_ops;
+	d_set_d_op(dentry, NFS_PROTO(dir)->dentry_ops);
 	inode = nfs_fhget(dentry->d_sb, entry->fh, entry->fattr);
 	if (IS_ERR(inode))
 		goto out;
@@ -449,14 +458,15 @@ out:
 
 /* Perform conversion from xdr to cache array */
 static
-void nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *entry,
+int nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *entry,
 				void *xdr_page, struct page *page, unsigned int buflen)
 {
 	struct xdr_stream stream;
 	struct xdr_buf buf;
 	__be32 *ptr = xdr_page;
-	int status;
 	struct nfs_cache_array *array;
+	unsigned int count = 0;
+	int status;
 
 	buf.head->iov_base = xdr_page;
 	buf.head->iov_len = buflen;
@@ -471,21 +481,32 @@ void nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *e
 
 	do {
 		status = xdr_decode(desc, entry, &stream);
-		if (status != 0)
+		if (status != 0) {
+			if (status == -EAGAIN)
+				status = 0;
 			break;
+		}
 
-		if (nfs_readdir_add_to_array(entry, page) == -1)
-			break;
-		if (desc->plus == 1)
+		count++;
+
+		if (desc->plus != 0)
 			nfs_prime_dcache(desc->file->f_path.dentry, entry);
+
+		status = nfs_readdir_add_to_array(entry, page);
+		if (status != 0)
+			break;
 	} while (!entry->eof);
 
-	if (status == -EBADCOOKIE && entry->eof) {
+	if (count == 0 || (status == -EBADCOOKIE && entry->eof != 0)) {
 		array = nfs_readdir_get_array(page);
-		array->eof_index = array->size - 1;
-		status = 0;
-		nfs_readdir_release_array(page);
+		if (!IS_ERR(array)) {
+			array->eof_index = array->size;
+			status = 0;
+			nfs_readdir_release_array(page);
+		} else
+			status = PTR_ERR(array);
 	}
+	return status;
 }
 
 static
@@ -537,11 +558,11 @@ int nfs_readdir_xdr_to_array(nfs_readdir_descriptor_t *desc, struct page *page,
 	struct nfs_entry entry;
 	struct file	*file = desc->file;
 	struct nfs_cache_array *array;
-	int status = 0;
+	int status = -ENOMEM;
 	unsigned int array_size = ARRAY_SIZE(pages);
 
 	entry.prev_cookie = 0;
-	entry.cookie = *desc->dir_cookie;
+	entry.cookie = desc->last_cookie;
 	entry.eof = 0;
 	entry.fh = nfs_alloc_fhandle();
 	entry.fattr = nfs_alloc_fattr();
@@ -549,6 +570,10 @@ int nfs_readdir_xdr_to_array(nfs_readdir_descriptor_t *desc, struct page *page,
 		goto out;
 
 	array = nfs_readdir_get_array(page);
+	if (IS_ERR(array)) {
+		status = PTR_ERR(array);
+		goto out;
+	}
 	memset(array, 0, sizeof(struct nfs_cache_array));
 	array->eof_index = -1;
 
@@ -556,12 +581,19 @@ int nfs_readdir_xdr_to_array(nfs_readdir_descriptor_t *desc, struct page *page,
 	if (!pages_ptr)
 		goto out_release_array;
 	do {
+		unsigned int pglen;
 		status = nfs_readdir_xdr_filler(pages, desc, &entry, file, inode);
 
 		if (status < 0)
 			break;
-		nfs_readdir_page_filler(desc, &entry, pages_ptr, page, array_size * PAGE_SIZE);
-	} while (array->eof_index < 0 && array->size < MAX_READDIR_ARRAY);
+		pglen = status;
+		status = nfs_readdir_page_filler(desc, &entry, pages_ptr, page, pglen);
+		if (status < 0) {
+			if (status == -ENOSPC)
+				status = 0;
+			break;
+		}
+	} while (array->eof_index < 0);
 
 	nfs_readdir_free_large_page(pages_ptr, pages, array_size);
 out_release_array:
@@ -582,8 +614,10 @@ static
 int nfs_readdir_filler(nfs_readdir_descriptor_t *desc, struct page* page)
 {
 	struct inode	*inode = desc->file->f_path.dentry->d_inode;
+	int ret;
 
-	if (nfs_readdir_xdr_to_array(desc, page, inode) < 0)
+	ret = nfs_readdir_xdr_to_array(desc, page, inode);
+	if (ret < 0)
 		goto error;
 	SetPageUptodate(page);
 
@@ -595,12 +629,14 @@ int nfs_readdir_filler(nfs_readdir_descriptor_t *desc, struct page* page)
 	return 0;
  error:
 	unlock_page(page);
-	return -EIO;
+	return ret;
 }
 
 static
 void cache_page_release(nfs_readdir_descriptor_t *desc)
 {
+	if (!desc->page->mapping)
+		nfs_readdir_clear_array(desc->page);
 	page_cache_release(desc->page);
 	desc->page = NULL;
 }
@@ -608,12 +644,8 @@ void cache_page_release(nfs_readdir_descriptor_t *desc)
 static
 struct page *get_cache_page(nfs_readdir_descriptor_t *desc)
 {
-	struct page *page;
-	page = read_cache_page(desc->file->f_path.dentry->d_inode->i_mapping,
+	return read_cache_page(desc->file->f_path.dentry->d_inode->i_mapping,
 			desc->page_index, (filler_t *)nfs_readdir_filler, desc);
-	if (IS_ERR(page))
-		desc->eof = 1;
-	return page;
 }
 
 /*
@@ -629,9 +661,8 @@ int find_cache_page(nfs_readdir_descriptor_t *desc)
 		return PTR_ERR(desc->page);
 
 	res = nfs_readdir_search_array(desc);
-	if (res == 0)
-		return 0;
-	cache_page_release(desc);
+	if (res != 0)
+		cache_page_release(desc);
 	return res;
 }
 
@@ -639,22 +670,18 @@ int find_cache_page(nfs_readdir_descriptor_t *desc)
 static inline
 int readdir_search_pagecache(nfs_readdir_descriptor_t *desc)
 {
-	int res = -EAGAIN;
+	int res;
 
-	while (1) {
-		res = find_cache_page(desc);
-		if (res != -EAGAIN)
-			break;
-		desc->page_index++;
+	if (desc->page_index == 0) {
+		desc->current_index = 0;
+		desc->last_cookie = 0;
 	}
+	do {
+		res = find_cache_page(desc);
+	} while (res == -EAGAIN);
 	return res;
 }
 
-static inline unsigned int dt_type(struct inode *inode)
-{
-	return (inode->i_mode >> 12) & 15;
-}
-
 /*
  * Once we've found the start of the dirent within a page: fill 'er up...
  */
@@ -666,35 +693,35 @@ int nfs_do_filldir(nfs_readdir_descriptor_t *desc, void *dirent,
 	int i = 0;
 	int res = 0;
 	struct nfs_cache_array *array = NULL;
-	unsigned int d_type = DT_UNKNOWN;
-	struct dentry *dentry = NULL;
 
 	array = nfs_readdir_get_array(desc->page);
+	if (IS_ERR(array)) {
+		res = PTR_ERR(array);
+		goto out;
+	}
 
 	for (i = desc->cache_entry_index; i < array->size; i++) {
-		d_type = DT_UNKNOWN;
+		struct nfs_cache_array_entry *ent;
 
-		res = filldir(dirent, array->array[i].string.name,
-			array->array[i].string.len, file->f_pos,
-			nfs_compat_user_ino64(array->array[i].ino), d_type);
-		if (res < 0)
+		ent = &array->array[i];
+		if (filldir(dirent, ent->string.name, ent->string.len,
+		    file->f_pos, nfs_compat_user_ino64(ent->ino),
+		    ent->d_type) < 0) {
+			desc->eof = 1;
 			break;
+		}
 		file->f_pos++;
-		desc->cache_entry_index = i;
 		if (i < (array->size-1))
 			*desc->dir_cookie = array->array[i+1].cookie;
 		else
 			*desc->dir_cookie = array->last_cookie;
-		if (i == array->eof_index) {
-			desc->eof = 1;
-			break;
-		}
 	}
+	if (array->eof_index >= 0)
+		desc->eof = 1;
 
 	nfs_readdir_release_array(desc->page);
+out:
 	cache_page_release(desc);
-	if (dentry != NULL)
-		dput(dentry);
 	dfprintk(DIRCACHE, "NFS: nfs_do_filldir() filling ended @ cookie %Lu; returning = %d\n",
 			(unsigned long long)*desc->dir_cookie, res);
 	return res;
@@ -729,13 +756,14 @@ int uncached_readdir(nfs_readdir_descriptor_t *desc, void *dirent,
 		goto out;
 	}
 
-	if (nfs_readdir_xdr_to_array(desc, page, inode) == -1) {
-		status = -EIO;
-		goto out_release;
-	}
-
 	desc->page_index = 0;
+	desc->last_cookie = *desc->dir_cookie;
 	desc->page = page;
+
+	status = nfs_readdir_xdr_to_array(desc, page, inode);
+	if (status < 0)
+		goto out_release;
+
 	status = nfs_do_filldir(desc, dirent, filldir);
 
  out:
@@ -757,7 +785,7 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 	struct inode	*inode = dentry->d_inode;
 	nfs_readdir_descriptor_t my_desc,
 			*desc = &my_desc;
-	int res = -ENOMEM;
+	int res;
 
 	dfprintk(FILE, "NFS: readdir(%s/%s) starting at cookie %llu\n",
 			dentry->d_parent->d_name.name, dentry->d_name.name,
@@ -782,18 +810,18 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 	if (res < 0)
 		goto out;
 
-	while (desc->eof != 1) {
+	do {
 		res = readdir_search_pagecache(desc);
 
 		if (res == -EBADCOOKIE) {
+			res = 0;
 			/* This means either end of directory */
 			if (*desc->dir_cookie && desc->eof == 0) {
 				/* Or that the server has 'lost' a cookie */
 				res = uncached_readdir(desc, dirent, filldir);
-				if (res >= 0)
+				if (res == 0)
 					continue;
 			}
-			res = 0;
 			break;
 		}
 		if (res == -ETOOSMALL && desc->plus) {
@@ -808,11 +836,9 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 			break;
 
 		res = nfs_do_filldir(desc, dirent, filldir);
-		if (res < 0) {
-			res = 0;
+		if (res < 0)
 			break;
-		}
-	}
+	} while (!desc->eof);
 out:
 	nfs_unblock_sillyrename(dentry);
 	if (res > 0)
@@ -912,7 +938,8 @@ static int nfs_check_verifier(struct inode *dir, struct dentry *dentry)
  * component of the path.
  * We check for this using LOOKUP_CONTINUE and LOOKUP_PARENT.
  */
-static inline unsigned int nfs_lookup_check_intent(struct nameidata *nd, unsigned int mask)
+static inline unsigned int nfs_lookup_check_intent(struct nameidata *nd,
+						unsigned int mask)
 {
 	if (nd->flags & (LOOKUP_CONTINUE|LOOKUP_PARENT))
 		return 0;
@@ -992,7 +1019,7 @@ int nfs_neg_need_reval(struct inode *dir, struct dentry *dentry,
  * If the parent directory is seen to have changed, we throw out the
  * cached dentry and do a new lookup.
  */
-static int nfs_lookup_revalidate(struct dentry * dentry, struct nameidata *nd)
+static int nfs_lookup_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
 	struct inode *dir;
 	struct inode *inode;
@@ -1001,6 +1028,9 @@ static int nfs_lookup_revalidate(struct dentry * dentry, struct nameidata *nd)
 	struct nfs_fattr *fattr = NULL;
 	int error;
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
 	parent = dget_parent(dentry);
 	dir = parent->d_inode;
 	nfs_inc_stats(dir, NFSIOS_DENTRYREVALIDATE);
@@ -1091,7 +1121,7 @@ out_error:
 /*
  * This is called from dput() when d_count is going to 0.
  */
-static int nfs_dentry_delete(struct dentry *dentry)
+static int nfs_dentry_delete(const struct dentry *dentry)
 {
 	dfprintk(VFS, "NFS: dentry_delete(%s/%s, %x)\n",
 		dentry->d_parent->d_name.name, dentry->d_name.name,
@@ -1162,7 +1192,7 @@ static struct dentry *nfs_lookup(struct inode *dir, struct dentry * dentry, stru
 	if (dentry->d_name.len > NFS_SERVER(dir)->namelen)
 		goto out;
 
-	dentry->d_op = NFS_PROTO(dir)->dentry_ops;
+	d_set_d_op(dentry, NFS_PROTO(dir)->dentry_ops);
 
 	/*
 	 * If we're doing an exclusive create, optimize away the lookup
@@ -1307,7 +1337,7 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry
 		res = ERR_PTR(-ENAMETOOLONG);
 		goto out;
 	}
-	dentry->d_op = NFS_PROTO(dir)->dentry_ops;
+	d_set_d_op(dentry, NFS_PROTO(dir)->dentry_ops);
 
 	/* Let vfs_create() deal with O_EXCL. Instantiate, but don't hash
 	 * the dentry. */
@@ -1345,12 +1375,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry
 				res = NULL;
 				goto out;
 			/* This turned out not to be a regular file */
-			case -EISDIR:
 			case -ENOTDIR:
 				goto no_open;
 			case -ELOOP:
 				if (!(nd->intent.open.flags & O_NOFOLLOW))
 					goto no_open;
+			/* case -EISDIR: */
 			/* case -EINVAL: */
 			default:
 				res = ERR_CAST(inode);
@@ -1692,11 +1722,9 @@ static int nfs_unlink(struct inode *dir, struct dentry *dentry)
 	dfprintk(VFS, "NFS: unlink(%s/%ld, %s)\n", dir->i_sb->s_id,
 		dir->i_ino, dentry->d_name.name);
 
-	spin_lock(&dcache_lock);
 	spin_lock(&dentry->d_lock);
-	if (atomic_read(&dentry->d_count) > 1) {
+	if (dentry->d_count > 1) {
 		spin_unlock(&dentry->d_lock);
-		spin_unlock(&dcache_lock);
 		/* Start asynchronous writeout of the inode */
 		write_inode_now(dentry->d_inode, 0);
 		error = nfs_sillyrename(dir, dentry);
@@ -1707,7 +1735,6 @@ static int nfs_unlink(struct inode *dir, struct dentry *dentry)
 		need_rehash = 1;
 	}
 	spin_unlock(&dentry->d_lock);
-	spin_unlock(&dcache_lock);
 	error = nfs_safe_remove(dentry);
 	if (!error || error == -ENOENT) {
 		nfs_set_verifier(dentry, nfs_save_change_attribute(dir));
@@ -1842,7 +1869,7 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	dfprintk(VFS, "NFS: rename(%s/%s -> %s/%s, ct=%d)\n",
 		 old_dentry->d_parent->d_name.name, old_dentry->d_name.name,
 		 new_dentry->d_parent->d_name.name, new_dentry->d_name.name,
-		 atomic_read(&new_dentry->d_count));
+		 new_dentry->d_count);
 
 	/*
 	 * For non-directories, check whether the target is busy and if so,
@@ -1860,7 +1887,7 @@ static int nfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 			rehash = new_dentry;
 		}
 
-		if (atomic_read(&new_dentry->d_count) > 2) {
+		if (new_dentry->d_count > 2) {
 			int err;
 
 			/* copy the target dentry's name */
@@ -2162,11 +2189,14 @@ int nfs_may_open(struct inode *inode, struct rpc_cred *cred, int openflags)
 	return nfs_do_access(inode, cred, nfs_open_permission_mask(openflags));
 }
 
-int nfs_permission(struct inode *inode, int mask)
+int nfs_permission(struct inode *inode, int mask, unsigned int flags)
 {
 	struct rpc_cred *cred;
 	int res = 0;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	nfs_inc_stats(inode, NFSIOS_VFSACCESS);
 
 	if ((mask & (MAY_READ | MAY_WRITE | MAY_EXEC)) == 0)
@@ -2214,7 +2244,7 @@ out:
 out_notsup:
 	res = nfs_revalidate_inode(NFS_SERVER(inode), inode);
 	if (res == 0)
-		res = generic_permission(inode, mask, NULL);
+		res = generic_permission(inode, mask, flags, NULL);
 	goto out;
 }
 
diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c
index 84d3c8b9020..e6ace0d93c7 100644
--- a/fs/nfs/direct.c
+++ b/fs/nfs/direct.c
@@ -867,7 +867,7 @@ static ssize_t nfs_direct_write(struct kiocb *iocb, const struct iovec *iov,
 		goto out;
 	nfs_alloc_commit_data(dreq);
 
-	if (dreq->commit_data == NULL || count < wsize)
+	if (dreq->commit_data == NULL || count <= wsize)
 		sync = NFS_FILE_SYNC;
 
 	dreq->inode = inode;
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 60677f9f131..7bf029ef408 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -693,6 +693,7 @@ do_getlk(struct file *filp, int cmd, struct file_lock *fl, int is_local)
 {
 	struct inode *inode = filp->f_mapping->host;
 	int status = 0;
+	unsigned int saved_type = fl->fl_type;
 
 	/* Try local locking first */
 	posix_test_lock(filp, fl);
@@ -700,6 +701,7 @@ do_getlk(struct file *filp, int cmd, struct file_lock *fl, int is_local)
 		/* found a conflict */
 		goto out;
 	}
+	fl->fl_type = saved_type;
 
 	if (nfs_have_delegation(inode, FMODE_READ))
 		goto out_noconflict;
diff --git a/fs/nfs/getroot.c b/fs/nfs/getroot.c
index ac7b814ce16..5596c6a2881 100644
--- a/fs/nfs/getroot.c
+++ b/fs/nfs/getroot.c
@@ -63,9 +63,11 @@ static int nfs_superblock_set_dummy_root(struct super_block *sb, struct inode *i
 		 * This again causes shrink_dcache_for_umount_subtree() to
 		 * Oops, since the test for IS_ROOT() will fail.
 		 */
-		spin_lock(&dcache_lock);
+		spin_lock(&sb->s_root->d_inode->i_lock);
+		spin_lock(&sb->s_root->d_lock);
 		list_del_init(&sb->s_root->d_alias);
-		spin_unlock(&dcache_lock);
+		spin_unlock(&sb->s_root->d_lock);
+		spin_unlock(&sb->s_root->d_inode->i_lock);
 	}
 	return 0;
 }
@@ -119,7 +121,7 @@ struct dentry *nfs_get_root(struct super_block *sb, struct nfs_fh *mntfh)
 	security_d_instantiate(ret, inode);
 
 	if (ret->d_op == NULL)
-		ret->d_op = server->nfs_client->rpc_ops->dentry_ops;
+		d_set_d_op(ret, server->nfs_client->rpc_ops->dentry_ops);
 out:
 	nfs_free_fattr(fsinfo.fattr);
 	return ret;
@@ -226,7 +228,7 @@ struct dentry *nfs4_get_root(struct super_block *sb, struct nfs_fh *mntfh)
 	security_d_instantiate(ret, inode);
 
 	if (ret->d_op == NULL)
-		ret->d_op = server->nfs_client->rpc_ops->dentry_ops;
+		d_set_d_op(ret, server->nfs_client->rpc_ops->dentry_ops);
 
 out:
 	nfs_free_fattr(fattr);
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 314f5716460..017daa3bed3 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -289,6 +289,7 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr)
 		} else if (S_ISDIR(inode->i_mode)) {
 			inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->dir_inode_ops;
 			inode->i_fop = &nfs_dir_operations;
+			inode->i_data.a_ops = &nfs_dir_aops;
 			if (nfs_server_capable(inode, NFS_CAP_READDIRPLUS))
 				set_bit(NFS_INO_ADVISE_RDPLUS, &NFS_I(inode)->flags);
 			/* Deal with crossing mountpoints */
@@ -1437,11 +1438,18 @@ struct inode *nfs_alloc_inode(struct super_block *sb)
 	return &nfsi->vfs_inode;
 }
 
-void nfs_destroy_inode(struct inode *inode)
+static void nfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(nfs_inode_cachep, NFS_I(inode));
 }
 
+void nfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, nfs_i_callback);
+}
+
 static inline void nfs4_init_once(struct nfs_inode *nfsi)
 {
 #ifdef CONFIG_NFS_V4
diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h
index db08ff3ff45..e6356b750b7 100644
--- a/fs/nfs/internal.h
+++ b/fs/nfs/internal.h
@@ -362,6 +362,15 @@ unsigned int nfs_page_length(struct page *page)
 }
 
 /*
+ * Convert a umode to a dirent->d_type
+ */
+static inline
+unsigned char nfs_umode_to_dtype(umode_t mode)
+{
+	return (mode >> 12) & 15;
+}
+
+/*
  * Determine the number of pages in an array of length 'len' and
  * with a base offset of 'base'
  */
diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c
index eceafe74f47..4f981f1f668 100644
--- a/fs/nfs/mount_clnt.c
+++ b/fs/nfs/mount_clnt.c
@@ -505,13 +505,13 @@ static struct rpc_procinfo mnt3_procedures[] = {
 
 static struct rpc_version mnt_version1 = {
 	.number		= 1,
-	.nrprocs	= 2,
+	.nrprocs	= ARRAY_SIZE(mnt_procedures),
 	.procs		= mnt_procedures,
 };
 
 static struct rpc_version mnt_version3 = {
 	.number		= 3,
-	.nrprocs	= 2,
+	.nrprocs	= ARRAY_SIZE(mnt3_procedures),
 	.procs		= mnt3_procedures,
 };
 
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index db6aa3673cf..74aaf3963c1 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -49,12 +49,17 @@ char *nfs_path(const char *base,
 	       const struct dentry *dentry,
 	       char *buffer, ssize_t buflen)
 {
-	char *end = buffer+buflen;
+	char *end;
 	int namelen;
+	unsigned seq;
 
+rename_retry:
+	end = buffer+buflen;
 	*--end = '\0';
 	buflen--;
-	spin_lock(&dcache_lock);
+
+	seq = read_seqbegin(&rename_lock);
+	rcu_read_lock();
 	while (!IS_ROOT(dentry) && dentry != droot) {
 		namelen = dentry->d_name.len;
 		buflen -= namelen + 1;
@@ -65,7 +70,9 @@ char *nfs_path(const char *base,
 		*--end = '/';
 		dentry = dentry->d_parent;
 	}
-	spin_unlock(&dcache_lock);
+	rcu_read_unlock();
+	if (read_seqretry(&rename_lock, seq))
+		goto rename_retry;
 	if (*end != '/') {
 		if (--buflen < 0)
 			goto Elong;
@@ -82,7 +89,9 @@ char *nfs_path(const char *base,
 	memcpy(end, base, namelen);
 	return end;
 Elong_unlock:
-	spin_unlock(&dcache_lock);
+	rcu_read_unlock();
+	if (read_seqretry(&rename_lock, seq))
+		goto rename_retry;
 Elong:
 	return ERR_PTR(-ENAMETOOLONG);
 }
diff --git a/fs/nfs/nfs2xdr.c b/fs/nfs/nfs2xdr.c
index e6bf45710cc..5914a1911c9 100644
--- a/fs/nfs/nfs2xdr.c
+++ b/fs/nfs/nfs2xdr.c
@@ -423,7 +423,7 @@ nfs_xdr_readdirres(struct rpc_rqst *req, __be32 *p, void *dummy)
 	struct page **page;
 	size_t hdrlen;
 	unsigned int pglen, recvd;
-	int status, nr = 0;
+	int status;
 
 	if ((status = ntohl(*p++)))
 		return nfs_stat_to_errno(status);
@@ -443,7 +443,7 @@ nfs_xdr_readdirres(struct rpc_rqst *req, __be32 *p, void *dummy)
 	if (pglen > recvd)
 		pglen = recvd;
 	page = rcvbuf->pages;
-	return nr;
+	return pglen;
 }
 
 static void print_overflow_msg(const char *func, const struct xdr_stream *xdr)
@@ -485,6 +485,8 @@ nfs_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, struct nfs_se
 	entry->prev_cookie	  = entry->cookie;
 	entry->cookie	  = ntohl(*p++);
 
+	entry->d_type = DT_UNKNOWN;
+
 	p = xdr_inline_peek(xdr, 8);
 	if (p != NULL)
 		entry->eof = !p[0] && p[1];
@@ -495,7 +497,7 @@ nfs_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, struct nfs_se
 
 out_overflow:
 	print_overflow_msg(__func__, xdr);
-	return ERR_PTR(-EIO);
+	return ERR_PTR(-EAGAIN);
 }
 
 /*
diff --git a/fs/nfs/nfs3xdr.c b/fs/nfs/nfs3xdr.c
index d9a5e832c25..f6cc60f06da 100644
--- a/fs/nfs/nfs3xdr.c
+++ b/fs/nfs/nfs3xdr.c
@@ -555,7 +555,7 @@ nfs3_xdr_readdirres(struct rpc_rqst *req, __be32 *p, struct nfs3_readdirres *res
 	struct page **page;
 	size_t hdrlen;
 	u32 recvd, pglen;
-	int status, nr = 0;
+	int status;
 
 	status = ntohl(*p++);
 	/* Decode post_op_attrs */
@@ -586,7 +586,7 @@ nfs3_xdr_readdirres(struct rpc_rqst *req, __be32 *p, struct nfs3_readdirres *res
 		pglen = recvd;
 	page = rcvbuf->pages;
 
-	return nr;
+	return pglen;
 }
 
 __be32 *
@@ -622,11 +622,13 @@ nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, struct nfs_s
 	entry->prev_cookie = entry->cookie;
 	p = xdr_decode_hyper(p, &entry->cookie);
 
+	entry->d_type = DT_UNKNOWN;
 	if (plus) {
 		entry->fattr->valid = 0;
 		p = xdr_decode_post_op_attr_stream(xdr, entry->fattr);
 		if (IS_ERR(p))
 			goto out_overflow_exit;
+		entry->d_type = nfs_umode_to_dtype(entry->fattr->mode);
 		/* In fact, a post_op_fh3: */
 		p = xdr_inline_decode(xdr, 4);
 		if (unlikely(!p))
@@ -656,7 +658,7 @@ nfs3_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry, struct nfs_s
 out_overflow:
 	print_overflow_msg(__func__, xdr);
 out_overflow_exit:
-	return ERR_PTR(-EIO);
+	return ERR_PTR(-EAGAIN);
 }
 
 /*
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 0f24cdf2cb1..4435e5e1f90 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -2852,8 +2852,10 @@ static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred,
 	nfs4_setup_readdir(cookie, NFS_COOKIEVERF(dir), dentry, &args);
 	res.pgbase = args.pgbase;
 	status = nfs4_call_sync(NFS_SERVER(dir), &msg, &args, &res, 0);
-	if (status == 0)
+	if (status >= 0) {
 		memcpy(NFS_COOKIEVERF(dir), res.verifier.data, NFS4_VERIFIER_SIZE);
+		status += args.pgbase;
+	}
 
 	nfs_invalidate_atime(dir);
 
@@ -3359,6 +3361,8 @@ static ssize_t nfs4_proc_get_acl(struct inode *inode, void *buf, size_t buflen)
 	ret = nfs_revalidate_inode(server, inode);
 	if (ret < 0)
 		return ret;
+	if (NFS_I(inode)->cache_validity & NFS_INO_INVALID_ACL)
+		nfs_zap_acl_cache(inode);
 	ret = nfs4_read_cached_acl(inode, buf, buflen);
 	if (ret != -ENOENT)
 		return ret;
@@ -3387,6 +3391,13 @@ static int __nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t bufl
 	nfs_inode_return_delegation(inode);
 	buf_to_pages(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
 	ret = nfs4_call_sync(server, &msg, &arg, &res, 1);
+	/*
+	 * Acl update can result in inode attribute update.
+	 * so mark the attribute cache invalid.
+	 */
+	spin_lock(&inode->i_lock);
+	NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATTR;
+	spin_unlock(&inode->i_lock);
 	nfs_access_zap_cache(inode);
 	nfs_zap_acl_cache(inode);
 	return ret;
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index f313c4cce7e..9f1826b012e 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -4518,7 +4518,7 @@ static int decode_readdir(struct xdr_stream *xdr, struct rpc_rqst *req, struct n
 	xdr_read_pages(xdr, pglen);
 
 
-	return 0;
+	return pglen;
 }
 
 static int decode_readlink(struct xdr_stream *xdr, struct rpc_rqst *req)
@@ -6208,6 +6208,10 @@ __be32 *nfs4_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 	if (entry->fattr->valid & NFS_ATTR_FATTR_FILEID)
 		entry->ino = entry->fattr->fileid;
 
+	entry->d_type = DT_UNKNOWN;
+	if (entry->fattr->valid & NFS_ATTR_FATTR_TYPE)
+		entry->d_type = nfs_umode_to_dtype(entry->fattr->mode);
+
 	if (verify_attr_len(xdr, p, len) < 0)
 		goto out_overflow;
 
@@ -6221,7 +6225,7 @@ __be32 *nfs4_decode_dirent(struct xdr_stream *xdr, struct nfs_entry *entry,
 
 out_overflow:
 	print_overflow_msg(__func__, xdr);
-	return ERR_PTR(-EIO);
+	return ERR_PTR(-EAGAIN);
 }
 
 /*
diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index 137b549e63d..b68536cc904 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -115,7 +115,7 @@ int nfs_set_page_tag_locked(struct nfs_page *req)
 {
 	if (!nfs_lock_request_dontget(req))
 		return 0;
-	if (req->wb_page != NULL)
+	if (test_bit(PG_MAPPED, &req->wb_flags))
 		radix_tree_tag_set(&NFS_I(req->wb_context->path.dentry->d_inode)->nfs_page_tree, req->wb_index, NFS_PAGE_TAG_LOCKED);
 	return 1;
 }
@@ -125,7 +125,7 @@ int nfs_set_page_tag_locked(struct nfs_page *req)
  */
 void nfs_clear_page_tag_locked(struct nfs_page *req)
 {
-	if (req->wb_page != NULL) {
+	if (test_bit(PG_MAPPED, &req->wb_flags)) {
 		struct inode *inode = req->wb_context->path.dentry->d_inode;
 		struct nfs_inode *nfsi = NFS_I(inode);
 
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index e4b62c6f5a6..aedcaa7f291 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -152,7 +152,6 @@ static void nfs_readpage_release(struct nfs_page *req)
 			(long long)NFS_FILEID(req->wb_context->path.dentry->d_inode),
 			req->wb_bytes,
 			(long long)req_offset(req));
-	nfs_clear_request(req);
 	nfs_release_request(req);
 }
 
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 0a42e8f4adc..4100630c9a5 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -39,7 +39,6 @@
 #include <linux/nfs_mount.h>
 #include <linux/nfs4_mount.h>
 #include <linux/lockd/bind.h>
-#include <linux/smp_lock.h>
 #include <linux/seq_file.h>
 #include <linux/mount.h>
 #include <linux/mnt_namespace.h>
@@ -67,6 +66,12 @@
 
 #define NFSDBG_FACILITY		NFSDBG_VFS
 
+#ifdef CONFIG_NFS_V3
+#define NFS_DEFAULT_VERSION 3
+#else
+#define NFS_DEFAULT_VERSION 2
+#endif
+
 enum {
 	/* Mount options that take no arguments */
 	Opt_soft, Opt_hard,
@@ -1064,12 +1069,10 @@ static int nfs_parse_mount_options(char *raw,
 			mnt->flags |= NFS_MOUNT_VER3;
 			mnt->version = 3;
 			break;
-#ifdef CONFIG_NFS_V4
 		case Opt_v4:
 			mnt->flags &= ~NFS_MOUNT_VER3;
 			mnt->version = 4;
 			break;
-#endif
 		case Opt_udp:
 			mnt->flags &= ~NFS_MOUNT_TCP;
 			mnt->nfs_server.protocol = XPRT_TRANSPORT_UDP;
@@ -1281,12 +1284,10 @@ static int nfs_parse_mount_options(char *raw,
 				mnt->flags |= NFS_MOUNT_VER3;
 				mnt->version = 3;
 				break;
-#ifdef CONFIG_NFS_V4
 			case NFS4_VERSION:
 				mnt->flags &= ~NFS_MOUNT_VER3;
 				mnt->version = 4;
 				break;
-#endif
 			default:
 				goto out_invalid_value;
 			}
@@ -2277,7 +2278,7 @@ static int nfs_get_sb(struct file_system_type *fs_type,
 	};
 	int error = -ENOMEM;
 
-	data = nfs_alloc_parsed_mount_data(3);
+	data = nfs_alloc_parsed_mount_data(NFS_DEFAULT_VERSION);
 	mntfh = nfs_alloc_fhandle();
 	if (data == NULL || mntfh == NULL)
 		goto out_free_fh;
diff --git a/fs/nfs/unlink.c b/fs/nfs/unlink.c
index 7bdec853140..8fe9eb47a97 100644
--- a/fs/nfs/unlink.c
+++ b/fs/nfs/unlink.c
@@ -496,7 +496,7 @@ nfs_sillyrename(struct inode *dir, struct dentry *dentry)
 
 	dfprintk(VFS, "NFS: silly-rename(%s/%s, ct=%d)\n",
 		dentry->d_parent->d_name.name, dentry->d_name.name,
-		atomic_read(&dentry->d_count));
+		dentry->d_count);
 	nfs_inc_stats(dir, NFSIOS_SILLYRENAME);
 
 	/*
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 4c14c17a527..10d648ea128 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -390,6 +390,7 @@ static int nfs_inode_add_request(struct inode *inode, struct nfs_page *req)
 		if (nfs_have_delegation(inode, FMODE_WRITE))
 			nfsi->change_attr++;
 	}
+	set_bit(PG_MAPPED, &req->wb_flags);
 	SetPagePrivate(req->wb_page);
 	set_page_private(req->wb_page, (unsigned long)req);
 	nfsi->npages++;
@@ -415,6 +416,7 @@ static void nfs_inode_remove_request(struct nfs_page *req)
 	spin_lock(&inode->i_lock);
 	set_page_private(req->wb_page, 0);
 	ClearPagePrivate(req->wb_page);
+	clear_bit(PG_MAPPED, &req->wb_flags);
 	radix_tree_delete(&nfsi->nfs_page_tree, req->wb_index);
 	nfsi->npages--;
 	if (!nfsi->npages) {
@@ -422,7 +424,6 @@ static void nfs_inode_remove_request(struct nfs_page *req)
 		iput(inode);
 	} else
 		spin_unlock(&inode->i_lock);
-	nfs_clear_request(req);
 	nfs_release_request(req);
 }
 
diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c
index 2a533a0af2a..7e84a852cda 100644
--- a/fs/nfsd/nfs3xdr.c
+++ b/fs/nfsd/nfs3xdr.c
@@ -260,9 +260,11 @@ void fill_post_wcc(struct svc_fh *fhp)
 	err = vfs_getattr(fhp->fh_export->ex_path.mnt, fhp->fh_dentry,
 			&fhp->fh_post_attr);
 	fhp->fh_post_change = fhp->fh_dentry->d_inode->i_version;
-	if (err)
+	if (err) {
 		fhp->fh_post_saved = 0;
-	else
+		/* Grab the ctime anyway - set_change_info might use it */
+		fhp->fh_post_attr.ctime = fhp->fh_dentry->d_inode->i_ctime;
+	} else
 		fhp->fh_post_saved = 1;
 }
 
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index f1e5ec6b510..fbd18c3074b 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -673,16 +673,17 @@ static void nfsd4_hash_conn(struct nfsd4_conn *conn, struct nfsd4_session *ses)
 	spin_unlock(&clp->cl_lock);
 }
 
-static void nfsd4_register_conn(struct nfsd4_conn *conn)
+static int nfsd4_register_conn(struct nfsd4_conn *conn)
 {
 	conn->cn_xpt_user.callback = nfsd4_conn_lost;
-	register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user);
+	return register_xpt_user(conn->cn_xprt, &conn->cn_xpt_user);
 }
 
 static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses)
 {
 	struct nfsd4_conn *conn;
 	u32 flags = NFS4_CDFC4_FORE;
+	int ret;
 
 	if (ses->se_flags & SESSION4_BACK_CHAN)
 		flags |= NFS4_CDFC4_BACK;
@@ -690,7 +691,10 @@ static __be32 nfsd4_new_conn(struct svc_rqst *rqstp, struct nfsd4_session *ses)
 	if (!conn)
 		return nfserr_jukebox;
 	nfsd4_hash_conn(conn, ses);
-	nfsd4_register_conn(conn);
+	ret = nfsd4_register_conn(conn);
+	if (ret)
+		/* oops; xprt is already down: */
+		nfsd4_conn_lost(&conn->cn_xpt_user);
 	return nfs_ok;
 }
 
@@ -1644,6 +1648,7 @@ static void nfsd4_sequence_check_conn(struct nfsd4_conn *new, struct nfsd4_sessi
 {
 	struct nfs4_client *clp = ses->se_client;
 	struct nfsd4_conn *c;
+	int ret;
 
 	spin_lock(&clp->cl_lock);
 	c = __nfsd4_find_conn(new->cn_xprt, ses);
@@ -1654,7 +1659,10 @@ static void nfsd4_sequence_check_conn(struct nfsd4_conn *new, struct nfsd4_sessi
 	}
 	__nfsd4_hash_conn(new, ses);
 	spin_unlock(&clp->cl_lock);
-	nfsd4_register_conn(new);
+	ret = nfsd4_register_conn(new);
+	if (ret)
+		/* oops; xprt is already down: */
+		nfsd4_conn_lost(&new->cn_xpt_user);
 	return;
 }
 
@@ -2254,7 +2262,7 @@ nfs4_file_downgrade(struct nfs4_file *fp, unsigned int share_access)
  * Spawn a thread to perform a recall on the delegation represented
  * by the lease (file_lock)
  *
- * Called from break_lease() with lock_kernel() held.
+ * Called from break_lease() with lock_flocks() held.
  * Note: we assume break_lease will only call this *once* for any given
  * lease.
  */
@@ -2278,7 +2286,7 @@ void nfsd_break_deleg_cb(struct file_lock *fl)
 	list_add_tail(&dp->dl_recall_lru, &del_recall_lru);
 	spin_unlock(&recall_lock);
 
-	/* only place dl_time is set. protected by lock_kernel*/
+	/* only place dl_time is set. protected by lock_flocks*/
 	dp->dl_time = get_seconds();
 
 	/*
@@ -2295,7 +2303,7 @@ void nfsd_break_deleg_cb(struct file_lock *fl)
 /*
  * The file_lock is being reapd.
  *
- * Called by locks_free_lock() with lock_kernel() held.
+ * Called by locks_free_lock() with lock_flocks() held.
  */
 static
 void nfsd_release_deleg_cb(struct file_lock *fl)
@@ -2310,7 +2318,7 @@ void nfsd_release_deleg_cb(struct file_lock *fl)
 }
 
 /*
- * Called from setlease() with lock_kernel() held
+ * Called from setlease() with lock_flocks() held
  */
 static
 int nfsd_same_client_deleg_cb(struct file_lock *onlist, struct file_lock *try)
@@ -4328,7 +4336,7 @@ __nfs4_state_shutdown(void)
 void
 nfs4_state_shutdown(void)
 {
-	cancel_rearming_delayed_workqueue(laundry_wq, &laundromat_work);
+	cancel_delayed_work_sync(&laundromat_work);
 	destroy_workqueue(laundry_wq);
 	locks_end_grace(&nfsd4_manager);
 	nfs4_lock_state();
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 184938fcff0..3a359023c9f 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -1756,8 +1756,7 @@ nfsd_rename(struct svc_rqst *rqstp, struct svc_fh *ffhp, char *fname, int flen,
 		goto out_dput_new;
 
 	if (svc_msnfs(ffhp) &&
-		((atomic_read(&odentry->d_count) > 1)
-		 || (atomic_read(&ndentry->d_count) > 1))) {
+		((odentry->d_count > 1) || (ndentry->d_count > 1))) {
 			host_err = -EPERM;
 			goto out_dput_new;
 	}
@@ -1843,7 +1842,7 @@ nfsd_unlink(struct svc_rqst *rqstp, struct svc_fh *fhp, int type,
 	if (type != S_IFDIR) { /* It's UNLINK */
 #ifdef MSNFS
 		if ((fhp->fh_export->ex_flags & NFSEXP_MSNFS) &&
-			(atomic_read(&rdentry->d_count) > 1)) {
+			(rdentry->d_count > 1)) {
 			host_err = -EPERM;
 		} else
 #endif
diff --git a/fs/nfsd/xdr4.h b/fs/nfsd/xdr4.h
index 4d476ff08ae..60fce3dc5cb 100644
--- a/fs/nfsd/xdr4.h
+++ b/fs/nfsd/xdr4.h
@@ -484,18 +484,17 @@ static inline bool nfsd4_not_cached(struct nfsd4_compoundres *resp)
 static inline void
 set_change_info(struct nfsd4_change_info *cinfo, struct svc_fh *fhp)
 {
-	BUG_ON(!fhp->fh_pre_saved || !fhp->fh_post_saved);
-	cinfo->atomic = 1;
+	BUG_ON(!fhp->fh_pre_saved);
+	cinfo->atomic = fhp->fh_post_saved;
 	cinfo->change_supported = IS_I_VERSION(fhp->fh_dentry->d_inode);
-	if (cinfo->change_supported) {
-		cinfo->before_change = fhp->fh_pre_change;
-		cinfo->after_change = fhp->fh_post_change;
-	} else {
-		cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
-		cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
-		cinfo->after_ctime_sec = fhp->fh_post_attr.ctime.tv_sec;
-		cinfo->after_ctime_nsec = fhp->fh_post_attr.ctime.tv_nsec;
-	}
+
+	cinfo->before_change = fhp->fh_pre_change;
+	cinfo->after_change = fhp->fh_post_change;
+	cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
+	cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
+	cinfo->after_ctime_sec = fhp->fh_post_attr.ctime.tv_sec;
+	cinfo->after_ctime_nsec = fhp->fh_post_attr.ctime.tv_nsec;
+
 }
 
 int nfs4svc_encode_voidres(struct svc_rqst *, __be32 *, void *);
diff --git a/fs/nilfs2/dat.c b/fs/nilfs2/dat.c
index 49c844dab33..59e5fe742f7 100644
--- a/fs/nilfs2/dat.c
+++ b/fs/nilfs2/dat.c
@@ -335,7 +335,7 @@ int nilfs_dat_move(struct inode *dat, __u64 vblocknr, sector_t blocknr)
 	 * the device at this point.
 	 *
 	 * To prevent nilfs_dat_translate() from returning the
-	 * uncommited block number, this makes a copy of the entry
+	 * uncommitted block number, this makes a copy of the entry
 	 * buffer and redirects nilfs_dat_translate() to the copy.
 	 */
 	if (!buffer_nilfs_redirected(entry_bh)) {
diff --git a/fs/nilfs2/gcinode.c b/fs/nilfs2/gcinode.c
index 33ad25ddd5c..caf9a6a3fb5 100644
--- a/fs/nilfs2/gcinode.c
+++ b/fs/nilfs2/gcinode.c
@@ -176,7 +176,6 @@ int nilfs_gccache_wait_and_mark_dirty(struct buffer_head *bh)
 int nilfs_init_gcinode(struct inode *inode)
 {
 	struct nilfs_inode_info *ii = NILFS_I(inode);
-	struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
 
 	inode->i_mode = S_IFREG;
 	mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS);
@@ -186,14 +185,6 @@ int nilfs_init_gcinode(struct inode *inode)
 	ii->i_flags = 0;
 	nilfs_bmap_init_gc(ii->i_bmap);
 
-	/*
-	 * Add the inode to GC inode list. Garbage Collection
-	 * is serialized and no two processes manipulate the
-	 * list simultaneously.
-	 */
-	igrab(inode);
-	list_add(&NILFS_I(inode)->i_dirty, &nilfs->ns_gc_inodes);
-
 	return 0;
 }
 
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 71d4bc8464e..77b48c8fab1 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -785,15 +785,19 @@ out_err:
 	return err;
 }
 
-int nilfs_permission(struct inode *inode, int mask)
+int nilfs_permission(struct inode *inode, int mask, unsigned int flags)
 {
-	struct nilfs_root *root = NILFS_I(inode)->i_root;
+	struct nilfs_root *root;
+
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
 
+	root = NILFS_I(inode)->i_root;
 	if ((mask & MAY_WRITE) && root &&
 	    root->cno != NILFS_CPTREE_CURRENT_CNO)
 		return -EROFS; /* snapshot is not writable */
 
-	return generic_permission(inode, mask, NULL);
+	return generic_permission(inode, mask, flags, NULL);
 }
 
 int nilfs_load_inode_block(struct nilfs_sb_info *sbi, struct inode *inode,
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 3e90f86d5bf..b185e937a33 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -337,6 +337,7 @@ static int nilfs_ioctl_move_blocks(struct super_block *sb,
 				   struct nilfs_argv *argv, void *buf)
 {
 	size_t nmembs = argv->v_nmembs;
+	struct the_nilfs *nilfs = NILFS_SB(sb)->s_nilfs;
 	struct inode *inode;
 	struct nilfs_vdesc *vdesc;
 	struct buffer_head *bh, *n;
@@ -349,10 +350,21 @@ static int nilfs_ioctl_move_blocks(struct super_block *sb,
 		ino = vdesc->vd_ino;
 		cno = vdesc->vd_cno;
 		inode = nilfs_iget_for_gc(sb, ino, cno);
-		if (unlikely(inode == NULL)) {
-			ret = -ENOMEM;
+		if (IS_ERR(inode)) {
+			ret = PTR_ERR(inode);
 			goto failed;
 		}
+		if (list_empty(&NILFS_I(inode)->i_dirty)) {
+			/*
+			 * Add the inode to GC inode list. Garbage Collection
+			 * is serialized and no two processes manipulate the
+			 * list simultaneously.
+			 */
+			igrab(inode);
+			list_add(&NILFS_I(inode)->i_dirty,
+				 &nilfs->ns_gc_inodes);
+		}
+
 		do {
 			ret = nilfs_ioctl_move_inode_block(inode, vdesc,
 							   &buffers);
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index f7560da5a56..0ca98823db5 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -256,7 +256,7 @@ extern void nilfs_update_inode(struct inode *, struct buffer_head *);
 extern void nilfs_truncate(struct inode *);
 extern void nilfs_evict_inode(struct inode *);
 extern int nilfs_setattr(struct dentry *, struct iattr *);
-int nilfs_permission(struct inode *inode, int mask);
+int nilfs_permission(struct inode *inode, int mask, unsigned int flags);
 extern int nilfs_load_inode_block(struct nilfs_sb_info *, struct inode *,
 				  struct buffer_head **);
 extern int nilfs_inode_dirty(struct inode *);
diff --git a/fs/nilfs2/super.c b/fs/nilfs2/super.c
index f804d41ec9d..e2dcc9c733f 100644
--- a/fs/nilfs2/super.c
+++ b/fs/nilfs2/super.c
@@ -162,10 +162,13 @@ struct inode *nilfs_alloc_inode(struct super_block *sb)
 	return &ii->vfs_inode;
 }
 
-void nilfs_destroy_inode(struct inode *inode)
+static void nilfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
 	struct nilfs_mdt_info *mdi = NILFS_MDT(inode);
 
+	INIT_LIST_HEAD(&inode->i_dentry);
+
 	if (mdi) {
 		kfree(mdi->mi_bgl); /* kfree(NULL) is safe */
 		kfree(mdi);
@@ -173,6 +176,11 @@ void nilfs_destroy_inode(struct inode *inode)
 	kmem_cache_free(nilfs_inode_cachep, NILFS_I(inode));
 }
 
+void nilfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, nilfs_i_callback);
+}
+
 static int nilfs_sync_super(struct nilfs_sb_info *sbi, int flag)
 {
 	struct the_nilfs *nilfs = sbi->s_nilfs;
@@ -838,7 +846,7 @@ static int nilfs_attach_snapshot(struct super_block *s, __u64 cno,
 
 static int nilfs_tree_was_touched(struct dentry *root_dentry)
 {
-	return atomic_read(&root_dentry->d_count) > 1;
+	return root_dentry->d_count > 1;
 }
 
 /**
diff --git a/fs/notify/fanotify/fanotify.c b/fs/notify/fanotify/fanotify.c
index b04f88eed09..f35794b97e8 100644
--- a/fs/notify/fanotify/fanotify.c
+++ b/fs/notify/fanotify/fanotify.c
@@ -92,7 +92,11 @@ static int fanotify_get_response_from_access(struct fsnotify_group *group,
 
 	pr_debug("%s: group=%p event=%p\n", __func__, group, event);
 
-	wait_event(group->fanotify_data.access_waitq, event->response);
+	wait_event(group->fanotify_data.access_waitq, event->response ||
+				atomic_read(&group->fanotify_data.bypass_perm));
+
+	if (!event->response) /* bypass_perm set */
+		return 0;
 
 	/* userspace responded, convert to something usable */
 	spin_lock(&event->lock);
diff --git a/fs/notify/fanotify/fanotify_user.c b/fs/notify/fanotify/fanotify_user.c
index 063224812b7..8b61220cffc 100644
--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -106,20 +106,29 @@ static int create_fd(struct fsnotify_group *group, struct fsnotify_event *event)
 	return client_fd;
 }
 
-static ssize_t fill_event_metadata(struct fsnotify_group *group,
+static int fill_event_metadata(struct fsnotify_group *group,
 				   struct fanotify_event_metadata *metadata,
 				   struct fsnotify_event *event)
 {
+	int ret = 0;
+
 	pr_debug("%s: group=%p metadata=%p event=%p\n", __func__,
 		 group, metadata, event);
 
 	metadata->event_len = FAN_EVENT_METADATA_LEN;
+	metadata->metadata_len = FAN_EVENT_METADATA_LEN;
 	metadata->vers = FANOTIFY_METADATA_VERSION;
 	metadata->mask = event->mask & FAN_ALL_OUTGOING_EVENTS;
 	metadata->pid = pid_vnr(event->tgid);
-	metadata->fd = create_fd(group, event);
+	if (unlikely(event->mask & FAN_Q_OVERFLOW))
+		metadata->fd = FAN_NOFD;
+	else {
+		metadata->fd = create_fd(group, event);
+		if (metadata->fd < 0)
+			ret = metadata->fd;
+	}
 
-	return metadata->fd;
+	return ret;
 }
 
 #ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
@@ -200,7 +209,7 @@ static int prepare_for_access_response(struct fsnotify_group *group,
 
 	mutex_lock(&group->fanotify_data.access_mutex);
 
-	if (group->fanotify_data.bypass_perm) {
+	if (atomic_read(&group->fanotify_data.bypass_perm)) {
 		mutex_unlock(&group->fanotify_data.access_mutex);
 		kmem_cache_free(fanotify_response_event_cache, re);
 		event->response = FAN_ALLOW;
@@ -257,24 +266,34 @@ static ssize_t copy_event_to_user(struct fsnotify_group *group,
 
 	pr_debug("%s: group=%p event=%p\n", __func__, group, event);
 
-	fd = fill_event_metadata(group, &fanotify_event_metadata, event);
-	if (fd < 0)
-		return fd;
+	ret = fill_event_metadata(group, &fanotify_event_metadata, event);
+	if (ret < 0)
+		goto out;
 
+	fd = fanotify_event_metadata.fd;
 	ret = prepare_for_access_response(group, event, fd);
 	if (ret)
 		goto out_close_fd;
 
 	ret = -EFAULT;
-	if (copy_to_user(buf, &fanotify_event_metadata, FAN_EVENT_METADATA_LEN))
+	if (copy_to_user(buf, &fanotify_event_metadata,
+			 fanotify_event_metadata.event_len))
 		goto out_kill_access_response;
 
-	return FAN_EVENT_METADATA_LEN;
+	return fanotify_event_metadata.event_len;
 
 out_kill_access_response:
 	remove_access_response(group, event, fd);
 out_close_fd:
-	sys_close(fd);
+	if (fd != FAN_NOFD)
+		sys_close(fd);
+out:
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+	if (event->mask & FAN_ALL_PERM_EVENTS) {
+		event->response = FAN_DENY;
+		wake_up(&group->fanotify_data.access_waitq);
+	}
+#endif
 	return ret;
 }
 
@@ -382,7 +401,7 @@ static int fanotify_release(struct inode *ignored, struct file *file)
 
 	mutex_lock(&group->fanotify_data.access_mutex);
 
-	group->fanotify_data.bypass_perm = true;
+	atomic_inc(&group->fanotify_data.bypass_perm);
 
 	list_for_each_entry_safe(re, lre, &group->fanotify_data.access_list, list) {
 		pr_debug("%s: found group=%p re=%p event=%p\n", __func__, group,
@@ -586,11 +605,10 @@ static int fanotify_add_vfsmount_mark(struct fsnotify_group *group,
 {
 	struct fsnotify_mark *fsn_mark;
 	__u32 added;
+	int ret = 0;
 
 	fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
 	if (!fsn_mark) {
-		int ret;
-
 		if (atomic_read(&group->num_marks) > group->fanotify_data.max_marks)
 			return -ENOSPC;
 
@@ -600,17 +618,16 @@ static int fanotify_add_vfsmount_mark(struct fsnotify_group *group,
 
 		fsnotify_init_mark(fsn_mark, fanotify_free_mark);
 		ret = fsnotify_add_mark(fsn_mark, group, NULL, mnt, 0);
-		if (ret) {
-			fanotify_free_mark(fsn_mark);
-			return ret;
-		}
+		if (ret)
+			goto err;
 	}
 	added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
-	fsnotify_put_mark(fsn_mark);
+
 	if (added & ~mnt->mnt_fsnotify_mask)
 		fsnotify_recalc_vfsmount_mask(mnt);
-
-	return 0;
+err:
+	fsnotify_put_mark(fsn_mark);
+	return ret;
 }
 
 static int fanotify_add_inode_mark(struct fsnotify_group *group,
@@ -619,6 +636,7 @@ static int fanotify_add_inode_mark(struct fsnotify_group *group,
 {
 	struct fsnotify_mark *fsn_mark;
 	__u32 added;
+	int ret = 0;
 
 	pr_debug("%s: group=%p inode=%p\n", __func__, group, inode);
 
@@ -634,8 +652,6 @@ static int fanotify_add_inode_mark(struct fsnotify_group *group,
 
 	fsn_mark = fsnotify_find_inode_mark(group, inode);
 	if (!fsn_mark) {
-		int ret;
-
 		if (atomic_read(&group->num_marks) > group->fanotify_data.max_marks)
 			return -ENOSPC;
 
@@ -645,16 +661,16 @@ static int fanotify_add_inode_mark(struct fsnotify_group *group,
 
 		fsnotify_init_mark(fsn_mark, fanotify_free_mark);
 		ret = fsnotify_add_mark(fsn_mark, group, inode, NULL, 0);
-		if (ret) {
-			fanotify_free_mark(fsn_mark);
-			return ret;
-		}
+		if (ret)
+			goto err;
 	}
 	added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
-	fsnotify_put_mark(fsn_mark);
+
 	if (added & ~inode->i_fsnotify_mask)
 		fsnotify_recalc_inode_mask(inode);
-	return 0;
+err:
+	fsnotify_put_mark(fsn_mark);
+	return ret;
 }
 
 /* fanotify syscalls */
@@ -687,8 +703,10 @@ SYSCALL_DEFINE2(fanotify_init, unsigned int, flags, unsigned int, event_f_flags)
 
 	/* fsnotify_alloc_group takes a ref.  Dropped in fanotify_release */
 	group = fsnotify_alloc_group(&fanotify_fsnotify_ops);
-	if (IS_ERR(group))
+	if (IS_ERR(group)) {
+		free_uid(user);
 		return PTR_ERR(group);
+	}
 
 	group->fanotify_data.user = user;
 	atomic_inc(&user->fanotify_listeners);
@@ -698,6 +716,7 @@ SYSCALL_DEFINE2(fanotify_init, unsigned int, flags, unsigned int, event_f_flags)
 	mutex_init(&group->fanotify_data.access_mutex);
 	init_waitqueue_head(&group->fanotify_data.access_waitq);
 	INIT_LIST_HEAD(&group->fanotify_data.access_list);
+	atomic_set(&group->fanotify_data.bypass_perm, 0);
 #endif
 	switch (flags & FAN_ALL_CLASS_BITS) {
 	case FAN_CLASS_NOTIF:
@@ -764,8 +783,10 @@ SYSCALL_DEFINE(fanotify_mark)(int fanotify_fd, unsigned int flags,
 	if (flags & ~FAN_ALL_MARK_FLAGS)
 		return -EINVAL;
 	switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE | FAN_MARK_FLUSH)) {
-	case FAN_MARK_ADD:
+	case FAN_MARK_ADD:		/* fallthrough */
 	case FAN_MARK_REMOVE:
+		if (!mask)
+			return -EINVAL;
 	case FAN_MARK_FLUSH:
 		break;
 	default:
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index 20dc218707c..79b47cbb5cd 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -59,7 +59,7 @@ void __fsnotify_update_child_dentry_flags(struct inode *inode)
 	/* determine if the children should tell inode about their events */
 	watched = fsnotify_inode_watches_children(inode);
 
-	spin_lock(&dcache_lock);
+	spin_lock(&inode->i_lock);
 	/* run all of the dentries associated with this inode.  Since this is a
 	 * directory, there damn well better only be one item on this list */
 	list_for_each_entry(alias, &inode->i_dentry, d_alias) {
@@ -68,19 +68,21 @@ void __fsnotify_update_child_dentry_flags(struct inode *inode)
 		/* run all of the children of the original inode and fix their
 		 * d_flags to indicate parental interest (their parent is the
 		 * original inode) */
+		spin_lock(&alias->d_lock);
 		list_for_each_entry(child, &alias->d_subdirs, d_u.d_child) {
 			if (!child->d_inode)
 				continue;
 
-			spin_lock(&child->d_lock);
+			spin_lock_nested(&child->d_lock, DENTRY_D_LOCK_NESTED);
 			if (watched)
 				child->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
 			else
 				child->d_flags &= ~DCACHE_FSNOTIFY_PARENT_WATCHED;
 			spin_unlock(&child->d_lock);
 		}
+		spin_unlock(&alias->d_lock);
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&inode->i_lock);
 }
 
 /* Notify this dentry's parent about a child's events. */
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 444c305a468..4cd5d5d78f9 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -752,6 +752,7 @@ SYSCALL_DEFINE1(inotify_init1, int, flags)
 	if (ret >= 0)
 		return ret;
 
+	fsnotify_put_group(group);
 	atomic_dec(&user->inotify_devs);
 out_free_uid:
 	free_uid(user);
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index 93622b175fc..a627ed82c0a 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -332,6 +332,13 @@ struct inode *ntfs_alloc_big_inode(struct super_block *sb)
 	return NULL;
 }
 
+static void ntfs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(ntfs_big_inode_cache, NTFS_I(inode));
+}
+
 void ntfs_destroy_big_inode(struct inode *inode)
 {
 	ntfs_inode *ni = NTFS_I(inode);
@@ -340,7 +347,7 @@ void ntfs_destroy_big_inode(struct inode *inode)
 	BUG_ON(ni->page);
 	if (!atomic_dec_and_test(&ni->count))
 		BUG();
-	kmem_cache_free(ntfs_big_inode_cache, NTFS_I(inode));
+	call_rcu(&inode->i_rcu, ntfs_i_callback);
 }
 
 static inline ntfs_inode *ntfs_alloc_extent_inode(void)
diff --git a/fs/ocfs2/acl.c b/fs/ocfs2/acl.c
index 391915093fe..704f6b1742f 100644
--- a/fs/ocfs2/acl.c
+++ b/fs/ocfs2/acl.c
@@ -291,13 +291,17 @@ static int ocfs2_set_acl(handle_t *handle,
 	return ret;
 }
 
-int ocfs2_check_acl(struct inode *inode, int mask)
+int ocfs2_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
-	struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
+	struct ocfs2_super *osb;
 	struct buffer_head *di_bh = NULL;
 	struct posix_acl *acl;
 	int ret = -EAGAIN;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
+	osb = OCFS2_SB(inode->i_sb);
 	if (!(osb->s_mount_opt & OCFS2_MOUNT_POSIX_ACL))
 		return ret;
 
diff --git a/fs/ocfs2/acl.h b/fs/ocfs2/acl.h
index 5c5d31f0585..4fe7c9cf4bf 100644
--- a/fs/ocfs2/acl.h
+++ b/fs/ocfs2/acl.h
@@ -26,7 +26,7 @@ struct ocfs2_acl_entry {
 	__le32 e_id;
 };
 
-extern int ocfs2_check_acl(struct inode *, int);
+extern int ocfs2_check_acl(struct inode *, int, unsigned int);
 extern int ocfs2_acl_chmod(struct inode *);
 extern int ocfs2_init_acl(handle_t *, struct inode *, struct inode *,
 			  struct buffer_head *, struct buffer_head *,
diff --git a/fs/ocfs2/aops.c b/fs/ocfs2/aops.c
index f1e962cb3b7..0d7c5540ad6 100644
--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -573,11 +573,14 @@ static void ocfs2_dio_end_io(struct kiocb *iocb,
 	/* this io's submitter should not have unlocked this before we could */
 	BUG_ON(!ocfs2_iocb_is_rw_locked(iocb));
 
+	if (ocfs2_iocb_is_sem_locked(iocb)) {
+		up_read(&inode->i_alloc_sem);
+		ocfs2_iocb_clear_sem_locked(iocb);
+	}
+
 	ocfs2_iocb_clear_rw_locked(iocb);
 
 	level = ocfs2_iocb_rw_locked_level(iocb);
-	if (!level)
-		up_read(&inode->i_alloc_sem);
 	ocfs2_rw_unlock(inode, level);
 
 	if (is_async)
diff --git a/fs/ocfs2/aops.h b/fs/ocfs2/aops.h
index 76bfdfda691..eceb456037c 100644
--- a/fs/ocfs2/aops.h
+++ b/fs/ocfs2/aops.h
@@ -68,8 +68,27 @@ static inline void ocfs2_iocb_set_rw_locked(struct kiocb *iocb, int level)
 	else
 		clear_bit(1, (unsigned long *)&iocb->private);
 }
+
+/*
+ * Using a named enum representing lock types in terms of #N bit stored in
+ * iocb->private, which is going to be used for communication bewteen
+ * ocfs2_dio_end_io() and ocfs2_file_aio_write/read().
+ */
+enum ocfs2_iocb_lock_bits {
+	OCFS2_IOCB_RW_LOCK = 0,
+	OCFS2_IOCB_RW_LOCK_LEVEL,
+	OCFS2_IOCB_SEM,
+	OCFS2_IOCB_NUM_LOCKS
+};
+
 #define ocfs2_iocb_clear_rw_locked(iocb) \
-	clear_bit(0, (unsigned long *)&iocb->private)
+	clear_bit(OCFS2_IOCB_RW_LOCK, (unsigned long *)&iocb->private)
 #define ocfs2_iocb_rw_locked_level(iocb) \
-	test_bit(1, (unsigned long *)&iocb->private)
+	test_bit(OCFS2_IOCB_RW_LOCK_LEVEL, (unsigned long *)&iocb->private)
+#define ocfs2_iocb_set_sem_locked(iocb) \
+	set_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private)
+#define ocfs2_iocb_clear_sem_locked(iocb) \
+	clear_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private)
+#define ocfs2_iocb_is_sem_locked(iocb) \
+	test_bit(OCFS2_IOCB_SEM, (unsigned long *)&iocb->private)
 #endif /* OCFS2_FILE_H */
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 52c7557f3e2..9e3d45bcb5f 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -307,8 +307,7 @@ static void o2hb_arm_write_timeout(struct o2hb_region *reg)
 
 static void o2hb_disarm_write_timeout(struct o2hb_region *reg)
 {
-	cancel_delayed_work(&reg->hr_write_timeout_work);
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&reg->hr_write_timeout_work);
 }
 
 static inline void o2hb_bio_wait_init(struct o2hb_bio_wait_ctxt *wc)
@@ -1964,8 +1963,10 @@ static struct config_item *o2hb_heartbeat_group_make_item(struct config_group *g
 	if (reg == NULL)
 		return ERR_PTR(-ENOMEM);
 
-	if (strlen(name) > O2HB_MAX_REGION_NAME_LEN)
-		return ERR_PTR(-ENAMETOOLONG);
+	if (strlen(name) > O2HB_MAX_REGION_NAME_LEN) {
+		ret = -ENAMETOOLONG;
+		goto free;
+	}
 
 	spin_lock(&o2hb_live_lock);
 	reg->hr_region_num = 0;
@@ -1974,7 +1975,8 @@ static struct config_item *o2hb_heartbeat_group_make_item(struct config_group *g
 							 O2NM_MAX_REGIONS);
 		if (reg->hr_region_num >= O2NM_MAX_REGIONS) {
 			spin_unlock(&o2hb_live_lock);
-			return ERR_PTR(-EFBIG);
+			ret = -EFBIG;
+			goto free;
 		}
 		set_bit(reg->hr_region_num, o2hb_region_bitmap);
 	}
@@ -1986,10 +1988,13 @@ static struct config_item *o2hb_heartbeat_group_make_item(struct config_group *g
 	ret = o2hb_debug_region_init(reg, o2hb_debug_dir);
 	if (ret) {
 		config_item_put(&reg->hr_item);
-		return ERR_PTR(ret);
+		goto free;
 	}
 
 	return &reg->hr_item;
+free:
+	kfree(reg);
+	return ERR_PTR(ret);
 }
 
 static void o2hb_heartbeat_group_drop_item(struct config_group *group,
diff --git a/fs/ocfs2/cluster/masklog.c b/fs/ocfs2/cluster/masklog.c
index c7fba396392..6c61771469a 100644
--- a/fs/ocfs2/cluster/masklog.c
+++ b/fs/ocfs2/cluster/masklog.c
@@ -113,10 +113,11 @@ static struct mlog_attribute mlog_attrs[MLOG_MAX_BITS] = {
 	define_mask(QUOTA),
 	define_mask(REFCOUNT),
 	define_mask(BASTS),
+	define_mask(RESERVATIONS),
+	define_mask(CLUSTER),
 	define_mask(ERROR),
 	define_mask(NOTICE),
 	define_mask(KTHREAD),
-	define_mask(RESERVATIONS),
 };
 
 static struct attribute *mlog_attr_ptrs[MLOG_MAX_BITS] = {NULL, };
diff --git a/fs/ocfs2/cluster/masklog.h b/fs/ocfs2/cluster/masklog.h
index ea2ed9f56c9..34d6544357d 100644
--- a/fs/ocfs2/cluster/masklog.h
+++ b/fs/ocfs2/cluster/masklog.h
@@ -81,7 +81,7 @@
 #include <linux/sched.h>
 
 /* bits that are frequently given and infrequently matched in the low word */
-/* NOTE: If you add a flag, you need to also update mlog.c! */
+/* NOTE: If you add a flag, you need to also update masklog.c! */
 #define ML_ENTRY	0x0000000000000001ULL /* func call entry */
 #define ML_EXIT		0x0000000000000002ULL /* func call exit */
 #define ML_TCP		0x0000000000000004ULL /* net cluster/tcp.c */
@@ -114,13 +114,14 @@
 #define ML_XATTR	0x0000000020000000ULL /* ocfs2 extended attributes */
 #define ML_QUOTA	0x0000000040000000ULL /* ocfs2 quota operations */
 #define ML_REFCOUNT	0x0000000080000000ULL /* refcount tree operations */
-#define ML_BASTS	0x0000001000000000ULL /* dlmglue asts and basts */
+#define ML_BASTS	0x0000000100000000ULL /* dlmglue asts and basts */
+#define ML_RESERVATIONS	0x0000000200000000ULL /* ocfs2 alloc reservations */
+#define ML_CLUSTER	0x0000000400000000ULL /* cluster stack */
+
 /* bits that are infrequently given and frequently matched in the high word */
-#define ML_ERROR	0x0000000100000000ULL /* sent to KERN_ERR */
-#define ML_NOTICE	0x0000000200000000ULL /* setn to KERN_NOTICE */
-#define ML_KTHREAD	0x0000000400000000ULL /* kernel thread activity */
-#define ML_RESERVATIONS	0x0000000800000000ULL /* ocfs2 alloc reservations */
-#define ML_CLUSTER	0x0000001000000000ULL /* cluster stack */
+#define ML_ERROR	0x1000000000000000ULL /* sent to KERN_ERR */
+#define ML_NOTICE	0x2000000000000000ULL /* setn to KERN_NOTICE */
+#define ML_KTHREAD	0x4000000000000000ULL /* kernel thread activity */
 
 #define MLOG_INITIAL_AND_MASK (ML_ERROR|ML_NOTICE)
 #define MLOG_INITIAL_NOT_MASK (ML_ENTRY|ML_EXIT)
diff --git a/fs/ocfs2/cluster/quorum.c b/fs/ocfs2/cluster/quorum.c
index cf3e1669621..a87366750f2 100644
--- a/fs/ocfs2/cluster/quorum.c
+++ b/fs/ocfs2/cluster/quorum.c
@@ -325,5 +325,7 @@ void o2quo_init(void)
 
 void o2quo_exit(void)
 {
-	flush_scheduled_work();
+	struct o2quo_state *qs = &o2quo_state;
+
+	flush_work_sync(&qs->qs_work);
 }
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index edaded48e7e..6d80ecc7834 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -52,9 +52,15 @@ void ocfs2_dentry_attach_gen(struct dentry *dentry)
 static int ocfs2_dentry_revalidate(struct dentry *dentry,
 				   struct nameidata *nd)
 {
-	struct inode *inode = dentry->d_inode;
+	struct inode *inode;
 	int ret = 0;    /* if all else fails, just return false */
-	struct ocfs2_super *osb = OCFS2_SB(dentry->d_sb);
+	struct ocfs2_super *osb;
+
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	inode = dentry->d_inode;
+	osb = OCFS2_SB(dentry->d_sb);
 
 	mlog_entry("(0x%p, '%.*s')\n", dentry,
 		   dentry->d_name.len, dentry->d_name.name);
@@ -169,23 +175,25 @@ struct dentry *ocfs2_find_local_alias(struct inode *inode,
 	struct list_head *p;
 	struct dentry *dentry = NULL;
 
-	spin_lock(&dcache_lock);
-
+	spin_lock(&inode->i_lock);
 	list_for_each(p, &inode->i_dentry) {
 		dentry = list_entry(p, struct dentry, d_alias);
 
+		spin_lock(&dentry->d_lock);
 		if (ocfs2_match_dentry(dentry, parent_blkno, skip_unhashed)) {
 			mlog(0, "dentry found: %.*s\n",
 			     dentry->d_name.len, dentry->d_name.name);
 
-			dget_locked(dentry);
+			dget_dlock(dentry);
+			spin_unlock(&dentry->d_lock);
 			break;
 		}
+		spin_unlock(&dentry->d_lock);
 
 		dentry = NULL;
 	}
 
-	spin_unlock(&dcache_lock);
+	spin_unlock(&inode->i_lock);
 
 	return dentry;
 }
@@ -476,7 +484,6 @@ static void ocfs2_dentry_iput(struct dentry *dentry, struct inode *inode)
 
 out:
 	iput(inode);
-	ocfs2_dentry_attach_gen(dentry);
 }
 
 /*
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index c49f6de0e7a..d417b3f9b0c 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -2461,8 +2461,10 @@ static int ocfs2_dx_dir_attach_index(struct ocfs2_super *osb,
 
 	di->i_dx_root = cpu_to_le64(dr_blkno);
 
+	spin_lock(&OCFS2_I(dir)->ip_lock);
 	OCFS2_I(dir)->ip_dyn_features |= OCFS2_INDEXED_DIR_FL;
 	di->i_dyn_features = cpu_to_le16(OCFS2_I(dir)->ip_dyn_features);
+	spin_unlock(&OCFS2_I(dir)->ip_lock);
 
 	ocfs2_journal_dirty(handle, di_bh);
 
@@ -4466,8 +4468,10 @@ static int ocfs2_dx_dir_remove_index(struct inode *dir,
 		goto out_commit;
 	}
 
+	spin_lock(&OCFS2_I(dir)->ip_lock);
 	OCFS2_I(dir)->ip_dyn_features &= ~OCFS2_INDEXED_DIR_FL;
 	di->i_dyn_features = cpu_to_le16(OCFS2_I(dir)->ip_dyn_features);
+	spin_unlock(&OCFS2_I(dir)->ip_lock);
 	di->i_dx_root = cpu_to_le64(0ULL);
 
 	ocfs2_journal_dirty(handle, di_bh);
diff --git a/fs/ocfs2/dlm/dlmdomain.c b/fs/ocfs2/dlm/dlmdomain.c
index 58a93b95373..cc2aaa96cfe 100644
--- a/fs/ocfs2/dlm/dlmdomain.c
+++ b/fs/ocfs2/dlm/dlmdomain.c
@@ -959,7 +959,7 @@ static int dlm_match_regions(struct dlm_ctxt *dlm,
 		r += O2HB_MAX_REGION_NAME_LEN;
 	}
 
-	local = kmalloc(sizeof(qr->qr_regions), GFP_KERNEL);
+	local = kmalloc(sizeof(qr->qr_regions), GFP_ATOMIC);
 	if (!local) {
 		status = -ENOMEM;
 		goto bail;
diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c
index f564b0e5f80..59f0f6bdfc6 100644
--- a/fs/ocfs2/dlm/dlmmaster.c
+++ b/fs/ocfs2/dlm/dlmmaster.c
@@ -2346,7 +2346,8 @@ static void dlm_deref_lockres_worker(struct dlm_work_item *item, void *data)
  */
 static int dlm_is_lockres_migrateable(struct dlm_ctxt *dlm,
 				      struct dlm_lock_resource *res,
-				      int *numlocks)
+				      int *numlocks,
+				      int *hasrefs)
 {
 	int ret;
 	int i;
@@ -2356,6 +2357,9 @@ static int dlm_is_lockres_migrateable(struct dlm_ctxt *dlm,
 
 	assert_spin_locked(&res->spinlock);
 
+	*numlocks = 0;
+	*hasrefs = 0;
+
 	ret = -EINVAL;
 	if (res->owner == DLM_LOCK_RES_OWNER_UNKNOWN) {
 		mlog(0, "cannot migrate lockres with unknown owner!\n");
@@ -2386,7 +2390,13 @@ static int dlm_is_lockres_migrateable(struct dlm_ctxt *dlm,
 	}
 
 	*numlocks = count;
-	mlog(0, "migrateable lockres having %d locks\n", *numlocks);
+
+	count = find_next_bit(res->refmap, O2NM_MAX_NODES, 0);
+	if (count < O2NM_MAX_NODES)
+		*hasrefs = 1;
+
+	mlog(0, "%s: res %.*s, Migrateable, locks %d, refs %d\n", dlm->name,
+	     res->lockname.len, res->lockname.name, *numlocks, *hasrefs);
 
 leave:
 	return ret;
@@ -2408,7 +2418,7 @@ static int dlm_migrate_lockres(struct dlm_ctxt *dlm,
 	const char *name;
 	unsigned int namelen;
 	int mle_added = 0;
-	int numlocks;
+	int numlocks, hasrefs;
 	int wake = 0;
 
 	if (!dlm_grab(dlm))
@@ -2417,13 +2427,13 @@ static int dlm_migrate_lockres(struct dlm_ctxt *dlm,
 	name = res->lockname.name;
 	namelen = res->lockname.len;
 
-	mlog(0, "migrating %.*s to %u\n", namelen, name, target);
+	mlog(0, "%s: Migrating %.*s to %u\n", dlm->name, namelen, name, target);
 
 	/*
 	 * ensure this lockres is a proper candidate for migration
 	 */
 	spin_lock(&res->spinlock);
-	ret = dlm_is_lockres_migrateable(dlm, res, &numlocks);
+	ret = dlm_is_lockres_migrateable(dlm, res, &numlocks, &hasrefs);
 	if (ret < 0) {
 		spin_unlock(&res->spinlock);
 		goto leave;
@@ -2431,10 +2441,8 @@ static int dlm_migrate_lockres(struct dlm_ctxt *dlm,
 	spin_unlock(&res->spinlock);
 
 	/* no work to do */
-	if (numlocks == 0) {
-		mlog(0, "no locks were found on this lockres! done!\n");
+	if (numlocks == 0 && !hasrefs)
 		goto leave;
-	}
 
 	/*
 	 * preallocate up front
@@ -2459,14 +2467,14 @@ static int dlm_migrate_lockres(struct dlm_ctxt *dlm,
 	 * find a node to migrate the lockres to
 	 */
 
-	mlog(0, "picking a migration node\n");
 	spin_lock(&dlm->spinlock);
 	/* pick a new node */
 	if (!test_bit(target, dlm->domain_map) ||
 	    target >= O2NM_MAX_NODES) {
 		target = dlm_pick_migration_target(dlm, res);
 	}
-	mlog(0, "node %u chosen for migration\n", target);
+	mlog(0, "%s: res %.*s, Node %u chosen for migration\n", dlm->name,
+	     namelen, name, target);
 
 	if (target >= O2NM_MAX_NODES ||
 	    !test_bit(target, dlm->domain_map)) {
@@ -2667,7 +2675,7 @@ int dlm_empty_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res)
 {
 	int ret;
 	int lock_dropped = 0;
-	int numlocks;
+	int numlocks, hasrefs;
 
 	spin_lock(&res->spinlock);
 	if (res->owner != dlm->node_num) {
@@ -2681,8 +2689,8 @@ int dlm_empty_lockres(struct dlm_ctxt *dlm, struct dlm_lock_resource *res)
 	}
 
 	/* No need to migrate a lockres having no locks */
-	ret = dlm_is_lockres_migrateable(dlm, res, &numlocks);
-	if (ret >= 0 && numlocks == 0) {
+	ret = dlm_is_lockres_migrateable(dlm, res, &numlocks, &hasrefs);
+	if (ret >= 0 && numlocks == 0 && !hasrefs) {
 		spin_unlock(&res->spinlock);
 		goto leave;
 	}
@@ -2915,6 +2923,12 @@ static u8 dlm_pick_migration_target(struct dlm_ctxt *dlm,
 		}
 		queue++;
 	}
+
+	nodenum = find_next_bit(res->refmap, O2NM_MAX_NODES, 0);
+	if (nodenum < O2NM_MAX_NODES) {
+		spin_unlock(&res->spinlock);
+		return nodenum;
+	}
 	spin_unlock(&res->spinlock);
 	mlog(0, "have not found a suitable target yet! checking domain map\n");
 
diff --git a/fs/ocfs2/dlmfs/dlmfs.c b/fs/ocfs2/dlmfs/dlmfs.c
index b2df490a19e..8c5c0eddc36 100644
--- a/fs/ocfs2/dlmfs/dlmfs.c
+++ b/fs/ocfs2/dlmfs/dlmfs.c
@@ -351,11 +351,18 @@ static struct inode *dlmfs_alloc_inode(struct super_block *sb)
 	return &ip->ip_vfs_inode;
 }
 
-static void dlmfs_destroy_inode(struct inode *inode)
+static void dlmfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(dlmfs_inode_cache, DLMFS_I(inode));
 }
 
+static void dlmfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, dlmfs_i_callback);
+}
+
 static void dlmfs_evict_inode(struct inode *inode)
 {
 	int status;
diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c
index 19ad145d2af..6adafa57606 100644
--- a/fs/ocfs2/export.c
+++ b/fs/ocfs2/export.c
@@ -138,7 +138,7 @@ check_gen:
 
 	result = d_obtain_alias(inode);
 	if (!IS_ERR(result))
-		result->d_op = &ocfs2_dentry_ops;
+		d_set_d_op(result, &ocfs2_dentry_ops);
 	else
 		mlog_errno(PTR_ERR(result));
 
@@ -176,7 +176,7 @@ static struct dentry *ocfs2_get_parent(struct dentry *child)
 
 	parent = d_obtain_alias(ocfs2_iget(OCFS2_SB(dir->i_sb), blkno, 0, 0));
 	if (!IS_ERR(parent))
-		parent->d_op = &ocfs2_dentry_ops;
+		d_set_d_op(parent, &ocfs2_dentry_ops);
 
 bail_unlock:
 	ocfs2_inode_unlock(dir, 0);
diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c
index 77b4c04a280..bdadbae0909 100644
--- a/fs/ocfs2/file.c
+++ b/fs/ocfs2/file.c
@@ -1307,10 +1307,13 @@ bail:
 	return err;
 }
 
-int ocfs2_permission(struct inode *inode, int mask)
+int ocfs2_permission(struct inode *inode, int mask, unsigned int flags)
 {
 	int ret;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	mlog_entry_void();
 
 	ret = ocfs2_inode_lock(inode, NULL, 0);
@@ -1320,7 +1323,7 @@ int ocfs2_permission(struct inode *inode, int mask)
 		goto out;
 	}
 
-	ret = generic_permission(inode, mask, ocfs2_check_acl);
+	ret = generic_permission(inode, mask, flags, ocfs2_check_acl);
 
 	ocfs2_inode_unlock(inode, 0);
 out:
@@ -2241,11 +2244,15 @@ static ssize_t ocfs2_file_aio_write(struct kiocb *iocb,
 
 	mutex_lock(&inode->i_mutex);
 
+	ocfs2_iocb_clear_sem_locked(iocb);
+
 relock:
 	/* to match setattr's i_mutex -> i_alloc_sem -> rw_lock ordering */
 	if (direct_io) {
 		down_read(&inode->i_alloc_sem);
 		have_alloc_sem = 1;
+		/* communicate with ocfs2_dio_end_io */
+		ocfs2_iocb_set_sem_locked(iocb);
 	}
 
 	/*
@@ -2382,8 +2389,10 @@ out:
 		ocfs2_rw_unlock(inode, rw_level);
 
 out_sems:
-	if (have_alloc_sem)
+	if (have_alloc_sem) {
 		up_read(&inode->i_alloc_sem);
+		ocfs2_iocb_clear_sem_locked(iocb);
+	}
 
 	mutex_unlock(&inode->i_mutex);
 
@@ -2527,6 +2536,8 @@ static ssize_t ocfs2_file_aio_read(struct kiocb *iocb,
 		goto bail;
 	}
 
+	ocfs2_iocb_clear_sem_locked(iocb);
+
 	/*
 	 * buffered reads protect themselves in ->readpage().  O_DIRECT reads
 	 * need locks to protect pending reads from racing with truncate.
@@ -2534,6 +2545,7 @@ static ssize_t ocfs2_file_aio_read(struct kiocb *iocb,
 	if (filp->f_flags & O_DIRECT) {
 		down_read(&inode->i_alloc_sem);
 		have_alloc_sem = 1;
+		ocfs2_iocb_set_sem_locked(iocb);
 
 		ret = ocfs2_rw_lock(inode, 0);
 		if (ret < 0) {
@@ -2575,8 +2587,10 @@ static ssize_t ocfs2_file_aio_read(struct kiocb *iocb,
 	}
 
 bail:
-	if (have_alloc_sem)
+	if (have_alloc_sem) {
 		up_read(&inode->i_alloc_sem);
+		ocfs2_iocb_clear_sem_locked(iocb);
+	}
 	if (rw_level != -1)
 		ocfs2_rw_unlock(inode, rw_level);
 	mlog_exit(ret);
diff --git a/fs/ocfs2/file.h b/fs/ocfs2/file.h
index 97bf761c9e7..f5afbbef670 100644
--- a/fs/ocfs2/file.h
+++ b/fs/ocfs2/file.h
@@ -61,7 +61,7 @@ int ocfs2_zero_extend(struct inode *inode, struct buffer_head *di_bh,
 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr);
 int ocfs2_getattr(struct vfsmount *mnt, struct dentry *dentry,
 		  struct kstat *stat);
-int ocfs2_permission(struct inode *inode, int mask);
+int ocfs2_permission(struct inode *inode, int mask, unsigned int flags);
 
 int ocfs2_should_update_atime(struct inode *inode,
 			      struct vfsmount *vfsmnt);
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index ff5744e1e36..d14cad6e2e4 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -147,7 +147,7 @@ static struct dentry *ocfs2_lookup(struct inode *dir, struct dentry *dentry,
 	spin_unlock(&oi->ip_lock);
 
 bail_add:
-	dentry->d_op = &ocfs2_dentry_ops;
+	d_set_d_op(dentry, &ocfs2_dentry_ops);
 	ret = d_splice_alias(inode, dentry);
 
 	if (inode) {
@@ -415,7 +415,7 @@ static int ocfs2_mknod(struct inode *dir,
 		mlog_errno(status);
 		goto leave;
 	}
-	dentry->d_op = &ocfs2_dentry_ops;
+	d_set_d_op(dentry, &ocfs2_dentry_ops);
 
 	status = ocfs2_add_entry(handle, dentry, inode,
 				 OCFS2_I(inode)->ip_blkno, parent_fe_bh,
@@ -743,7 +743,7 @@ static int ocfs2_link(struct dentry *old_dentry,
 	}
 
 	ihold(inode);
-	dentry->d_op = &ocfs2_dentry_ops;
+	d_set_d_op(dentry, &ocfs2_dentry_ops);
 	d_instantiate(dentry, inode);
 
 out_commit:
@@ -1794,7 +1794,7 @@ static int ocfs2_symlink(struct inode *dir,
 		mlog_errno(status);
 		goto bail;
 	}
-	dentry->d_op = &ocfs2_dentry_ops;
+	d_set_d_op(dentry, &ocfs2_dentry_ops);
 
 	status = ocfs2_add_entry(handle, dentry, inode,
 				 le64_to_cpu(fe->i_blkno), parent_fe_bh,
@@ -2459,7 +2459,7 @@ int ocfs2_mv_orphaned_inode_to_new(struct inode *dir,
 		goto out_commit;
 	}
 
-	dentry->d_op = &ocfs2_dentry_ops;
+	d_set_d_op(dentry, &ocfs2_dentry_ops);
 	d_instantiate(dentry, inode);
 	status = 0;
 out_commit:
diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h
index d8408217e3b..70dd3b1798f 100644
--- a/fs/ocfs2/ocfs2.h
+++ b/fs/ocfs2/ocfs2.h
@@ -159,7 +159,9 @@ struct ocfs2_lock_res {
 	char                     l_name[OCFS2_LOCK_ID_MAX_LEN];
 	unsigned int             l_ro_holders;
 	unsigned int             l_ex_holders;
-	unsigned char            l_level;
+	signed char		 l_level;
+	signed char		 l_requested;
+	signed char		 l_blocking;
 
 	/* Data packed - type enum ocfs2_lock_type */
 	unsigned char            l_type;
@@ -169,8 +171,6 @@ struct ocfs2_lock_res {
 	unsigned char            l_action;
 	/* Data packed - enum type ocfs2_unlock_action */
 	unsigned char            l_unlock_action;
-	unsigned char            l_requested;
-	unsigned char            l_blocking;
 	unsigned int             l_pending_gen;
 
 	spinlock_t               l_lock;
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index c2e4f8222e2..bf2e7764920 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -350,7 +350,7 @@ enum {
 #define OCFS2_LAST_LOCAL_SYSTEM_INODE LOCAL_GROUP_QUOTA_SYSTEM_INODE
 	NUM_SYSTEM_INODES
 };
-#define NUM_GLOBAL_SYSTEM_INODES OCFS2_LAST_GLOBAL_SYSTEM_INODE
+#define NUM_GLOBAL_SYSTEM_INODES OCFS2_FIRST_LOCAL_SYSTEM_INODE
 #define NUM_LOCAL_SYSTEM_INODES	\
 		(NUM_SYSTEM_INODES - OCFS2_FIRST_LOCAL_SYSTEM_INODE)
 
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index 252e7c82f92..a5ebe421195 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -190,7 +190,7 @@ static struct ocfs2_live_connection *ocfs2_connection_find(const char *name)
 			return c;
 	}
 
-	return c;
+	return NULL;
 }
 
 /*
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index f02c0ef3157..17ff46fa8a1 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -41,7 +41,6 @@
 #include <linux/mount.h>
 #include <linux/seq_file.h>
 #include <linux/quotaops.h>
-#include <linux/smp_lock.h>
 
 #define MLOG_MASK_PREFIX ML_SUPER
 #include <cluster/masklog.h>
@@ -570,11 +569,18 @@ static struct inode *ocfs2_alloc_inode(struct super_block *sb)
 	return &oi->vfs_inode;
 }
 
-static void ocfs2_destroy_inode(struct inode *inode)
+static void ocfs2_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(ocfs2_inode_cachep, OCFS2_I(inode));
 }
 
+static void ocfs2_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, ocfs2_i_callback);
+}
+
 static unsigned long long ocfs2_max_file_offset(unsigned int bbits,
 						unsigned int cbits)
 {
diff --git a/fs/openpromfs/inode.c b/fs/openpromfs/inode.c
index ddb1f41376e..a2a5bff774e 100644
--- a/fs/openpromfs/inode.c
+++ b/fs/openpromfs/inode.c
@@ -343,11 +343,18 @@ static struct inode *openprom_alloc_inode(struct super_block *sb)
 	return &oi->vfs_inode;
 }
 
-static void openprom_destroy_inode(struct inode *inode)
+static void openprom_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(op_inode_cachep, OP_I(inode));
 }
 
+static void openprom_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, openprom_i_callback);
+}
+
 static struct inode *openprom_iget(struct super_block *sb, ino_t ino)
 {
 	struct inode *inode;
@@ -418,7 +425,7 @@ out_no_root:
 static struct dentry *openprom_mount(struct file_system_type *fs_type,
 	int flags, const char *dev_name, void *data)
 {
-	return mount_single(fs_type, flags, data, openprom_fill_super)
+	return mount_single(fs_type, flags, data, openprom_fill_super);
 }
 
 static struct file_system_type openprom_fs_type = {
diff --git a/fs/pipe.c b/fs/pipe.c
index a8012a95572..68f1f8e4e23 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -999,12 +999,12 @@ struct file *create_write_pipe(int flags)
 		goto err;
 
 	err = -ENOMEM;
-	path.dentry = d_alloc(pipe_mnt->mnt_sb->s_root, &name);
+	path.dentry = d_alloc_pseudo(pipe_mnt->mnt_sb, &name);
 	if (!path.dentry)
 		goto err_inode;
 	path.mnt = mntget(pipe_mnt);
 
-	path.dentry->d_op = &pipefs_dentry_operations;
+	d_set_d_op(path.dentry, &pipefs_dentry_operations);
 	d_instantiate(path.dentry, inode);
 
 	err = -ENFILE;
@@ -1199,12 +1199,24 @@ int pipe_proc_fn(struct ctl_table *table, int write, void __user *buf,
 	return ret;
 }
 
+/*
+ * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
+ * location, so checking ->i_pipe is not enough to verify that this is a
+ * pipe.
+ */
+struct pipe_inode_info *get_pipe_info(struct file *file)
+{
+	struct inode *i = file->f_path.dentry->d_inode;
+
+	return S_ISFIFO(i->i_mode) ? i->i_pipe : NULL;
+}
+
 long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
 {
 	struct pipe_inode_info *pipe;
 	long ret;
 
-	pipe = file->f_path.dentry->d_inode->i_pipe;
+	pipe = get_pipe_info(file);
 	if (!pipe)
 		return -EBADF;
 
@@ -1241,6 +1253,10 @@ out:
 	return ret;
 }
 
+static const struct super_operations pipefs_ops = {
+	.destroy_inode = free_inode_nonrcu,
+};
+
 /*
  * pipefs should _never_ be mounted by userland - too much of security hassle,
  * no real gain from having the whole whorehouse mounted. So we don't need
@@ -1250,7 +1266,7 @@ out:
 static struct dentry *pipefs_mount(struct file_system_type *fs_type,
 			 int flags, const char *dev_name, void *data)
 {
-	return mount_pseudo(fs_type, "pipe:", NULL, PIPEFS_MAGIC);
+	return mount_pseudo(fs_type, "pipe:", &pipefs_ops, PIPEFS_MAGIC);
 }
 
 static struct file_system_type pipe_fs_type = {
@@ -1276,7 +1292,7 @@ static int __init init_pipe_fs(void)
 static void __exit exit_pipe_fs(void)
 {
 	unregister_filesystem(&pipe_fs_type);
-	mntput(pipe_mnt);
+	mntput_long(pipe_mnt);
 }
 
 fs_initcall(init_pipe_fs);
diff --git a/fs/pnode.c b/fs/pnode.c
index 8066b8dd748..d42514e3238 100644
--- a/fs/pnode.c
+++ b/fs/pnode.c
@@ -288,7 +288,7 @@ out:
  */
 static inline int do_refcount_check(struct vfsmount *mnt, int count)
 {
-	int mycount = atomic_read(&mnt->mnt_count) - mnt->mnt_ghosts;
+	int mycount = mnt_get_count(mnt) - mnt->mnt_ghosts;
 	return (mycount > count);
 }
 
@@ -300,7 +300,7 @@ static inline int do_refcount_check(struct vfsmount *mnt, int count)
  * Check if any of these mounts that **do not have submounts**
  * have more references than 'refcnt'. If so return busy.
  *
- * vfsmount lock must be held for read or write
+ * vfsmount lock must be held for write
  */
 int propagate_mount_busy(struct vfsmount *mnt, int refcnt)
 {
diff --git a/fs/proc/Makefile b/fs/proc/Makefile
index 2758e2afc51..288a49e098b 100644
--- a/fs/proc/Makefile
+++ b/fs/proc/Makefile
@@ -15,6 +15,7 @@ proc-y	+= devices.o
 proc-y	+= interrupts.o
 proc-y	+= loadavg.o
 proc-y	+= meminfo.o
+proc-y	+= proc_console.o
 proc-y	+= stat.o
 proc-y	+= uptime.o
 proc-y	+= version.o
diff --git a/fs/proc/base.c b/fs/proc/base.c
index f3d02ca461e..b20962c71a5 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -1407,6 +1407,82 @@ static const struct file_operations proc_pid_sched_operations = {
 
 #endif
 
+#ifdef CONFIG_SCHED_AUTOGROUP
+/*
+ * Print out autogroup related information:
+ */
+static int sched_autogroup_show(struct seq_file *m, void *v)
+{
+	struct inode *inode = m->private;
+	struct task_struct *p;
+
+	p = get_proc_task(inode);
+	if (!p)
+		return -ESRCH;
+	proc_sched_autogroup_show_task(p, m);
+
+	put_task_struct(p);
+
+	return 0;
+}
+
+static ssize_t
+sched_autogroup_write(struct file *file, const char __user *buf,
+	    size_t count, loff_t *offset)
+{
+	struct inode *inode = file->f_path.dentry->d_inode;
+	struct task_struct *p;
+	char buffer[PROC_NUMBUF];
+	long nice;
+	int err;
+
+	memset(buffer, 0, sizeof(buffer));
+	if (count > sizeof(buffer) - 1)
+		count = sizeof(buffer) - 1;
+	if (copy_from_user(buffer, buf, count))
+		return -EFAULT;
+
+	err = strict_strtol(strstrip(buffer), 0, &nice);
+	if (err)
+		return -EINVAL;
+
+	p = get_proc_task(inode);
+	if (!p)
+		return -ESRCH;
+
+	err = nice;
+	err = proc_sched_autogroup_set_nice(p, &err);
+	if (err)
+		count = err;
+
+	put_task_struct(p);
+
+	return count;
+}
+
+static int sched_autogroup_open(struct inode *inode, struct file *filp)
+{
+	int ret;
+
+	ret = single_open(filp, sched_autogroup_show, NULL);
+	if (!ret) {
+		struct seq_file *m = filp->private_data;
+
+		m->private = inode;
+	}
+	return ret;
+}
+
+static const struct file_operations proc_pid_sched_autogroup_operations = {
+	.open		= sched_autogroup_open,
+	.read		= seq_read,
+	.write		= sched_autogroup_write,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+#endif /* CONFIG_SCHED_AUTOGROUP */
+
 static ssize_t comm_write(struct file *file, const char __user *buf,
 				size_t count, loff_t *offset)
 {
@@ -1574,7 +1650,7 @@ static int do_proc_readlink(struct path *path, char __user *buffer, int buflen)
 	if (!tmp)
 		return -ENOMEM;
 
-	pathname = d_path_with_unreachable(path, tmp, PAGE_SIZE);
+	pathname = d_path(path, tmp, PAGE_SIZE);
 	len = PTR_ERR(pathname);
 	if (IS_ERR(pathname))
 		goto out;
@@ -1719,10 +1795,16 @@ static int pid_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat
  */
 static int pid_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct inode *inode = dentry->d_inode;
-	struct task_struct *task = get_proc_task(inode);
+	struct inode *inode;
+	struct task_struct *task;
 	const struct cred *cred;
 
+	if (nd && nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	inode = dentry->d_inode;
+	task = get_proc_task(inode);
+
 	if (task) {
 		if ((inode->i_mode == (S_IFDIR|S_IRUGO|S_IXUGO)) ||
 		    task_dumpable(task)) {
@@ -1744,7 +1826,7 @@ static int pid_revalidate(struct dentry *dentry, struct nameidata *nd)
 	return 0;
 }
 
-static int pid_delete_dentry(struct dentry * dentry)
+static int pid_delete_dentry(const struct dentry * dentry)
 {
 	/* Is the task we represent dead?
 	 * If so, then don't put the dentry on the lru list,
@@ -1888,12 +1970,19 @@ static int proc_fd_link(struct inode *inode, struct path *path)
 
 static int tid_fd_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct inode *inode = dentry->d_inode;
-	struct task_struct *task = get_proc_task(inode);
-	int fd = proc_fd(inode);
+	struct inode *inode;
+	struct task_struct *task;
+	int fd;
 	struct files_struct *files;
 	const struct cred *cred;
 
+	if (nd && nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	inode = dentry->d_inode;
+	task = get_proc_task(inode);
+	fd = proc_fd(inode);
+
 	if (task) {
 		files = get_files_struct(task);
 		if (files) {
@@ -1969,7 +2058,7 @@ static struct dentry *proc_fd_instantiate(struct inode *dir,
 	inode->i_op = &proc_pid_link_inode_operations;
 	inode->i_size = 64;
 	ei->op.proc_get_link = proc_fd_link;
-	dentry->d_op = &tid_fd_dentry_operations;
+	d_set_d_op(dentry, &tid_fd_dentry_operations);
 	d_add(dentry, inode);
 	/* Close the race of the process dying before we return the dentry */
 	if (tid_fd_revalidate(dentry, NULL))
@@ -2101,11 +2190,13 @@ static const struct file_operations proc_fd_operations = {
  * /proc/pid/fd needs a special permission handler so that a process can still
  * access /proc/self/fd after it has executed a setuid().
  */
-static int proc_fd_permission(struct inode *inode, int mask)
+static int proc_fd_permission(struct inode *inode, int mask, unsigned int flags)
 {
 	int rv;
 
-	rv = generic_permission(inode, mask, NULL);
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+	rv = generic_permission(inode, mask, flags, NULL);
 	if (rv == 0)
 		return 0;
 	if (task_pid(current) == proc_pid(inode))
@@ -2137,7 +2228,7 @@ static struct dentry *proc_fdinfo_instantiate(struct inode *dir,
 	ei->fd = fd;
 	inode->i_mode = S_IFREG | S_IRUSR;
 	inode->i_fop = &proc_fdinfo_file_operations;
-	dentry->d_op = &tid_fd_dentry_operations;
+	d_set_d_op(dentry, &tid_fd_dentry_operations);
 	d_add(dentry, inode);
 	/* Close the race of the process dying before we return the dentry */
 	if (tid_fd_revalidate(dentry, NULL))
@@ -2196,7 +2287,7 @@ static struct dentry *proc_pident_instantiate(struct inode *dir,
 	if (p->fop)
 		inode->i_fop = p->fop;
 	ei->op = p->op;
-	dentry->d_op = &pid_dentry_operations;
+	d_set_d_op(dentry, &pid_dentry_operations);
 	d_add(dentry, inode);
 	/* Close the race of the process dying before we return the dentry */
 	if (pid_revalidate(dentry, NULL))
@@ -2563,8 +2654,14 @@ static const struct pid_entry proc_base_stuff[] = {
  */
 static int proc_base_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct inode *inode = dentry->d_inode;
-	struct task_struct *task = get_proc_task(inode);
+	struct inode *inode;
+	struct task_struct *task;
+
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	inode = dentry->d_inode;
+	task = get_proc_task(inode);
 	if (task) {
 		put_task_struct(task);
 		return 1;
@@ -2615,7 +2712,7 @@ static struct dentry *proc_base_instantiate(struct inode *dir,
 	if (p->fop)
 		inode->i_fop = p->fop;
 	ei->op = p->op;
-	dentry->d_op = &proc_base_dentry_operations;
+	d_set_d_op(dentry, &proc_base_dentry_operations);
 	d_add(dentry, inode);
 	error = NULL;
 out:
@@ -2733,6 +2830,9 @@ static const struct pid_entry tgid_base_stuff[] = {
 #ifdef CONFIG_SCHED_DEBUG
 	REG("sched",      S_IRUGO|S_IWUSR, proc_pid_sched_operations),
 #endif
+#ifdef CONFIG_SCHED_AUTOGROUP
+	REG("autogroup",  S_IRUGO|S_IWUSR, proc_pid_sched_autogroup_operations),
+#endif
 	REG("comm",      S_IRUGO|S_IWUSR, proc_pid_set_comm_operations),
 #ifdef CONFIG_HAVE_ARCH_TRACEHOOK
 	INF("syscall",    S_IRUSR, proc_pid_syscall),
@@ -2926,7 +3026,7 @@ static struct dentry *proc_pid_instantiate(struct inode *dir,
 	inode->i_nlink = 2 + pid_entry_count_dirs(tgid_base_stuff,
 		ARRAY_SIZE(tgid_base_stuff));
 
-	dentry->d_op = &pid_dentry_operations;
+	d_set_d_op(dentry, &pid_dentry_operations);
 
 	d_add(dentry, inode);
 	/* Close the race of the process dying before we return the dentry */
@@ -3169,7 +3269,7 @@ static struct dentry *proc_task_instantiate(struct inode *dir,
 	inode->i_nlink = 2 + pid_entry_count_dirs(tid_base_stuff,
 		ARRAY_SIZE(tid_base_stuff));
 
-	dentry->d_op = &pid_dentry_operations;
+	d_set_d_op(dentry, &pid_dentry_operations);
 
 	d_add(dentry, inode);
 	/* Close the race of the process dying before we return the dentry */
diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index dd29f033766..f766be29d2c 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -400,7 +400,7 @@ static const struct inode_operations proc_link_inode_operations = {
  * smarter: we could keep a "volatile" flag in the 
  * inode to indicate which ones to keep.
  */
-static int proc_delete_dentry(struct dentry * dentry)
+static int proc_delete_dentry(const struct dentry * dentry)
 {
 	return 1;
 }
@@ -439,7 +439,7 @@ struct dentry *proc_lookup_de(struct proc_dir_entry *de, struct inode *dir,
 out_unlock:
 
 	if (inode) {
-		dentry->d_op = &proc_dentry_operations;
+		d_set_d_op(dentry, &proc_dentry_operations);
 		d_add(dentry, inode);
 		return NULL;
 	}
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 9c2b5f48487..6bcb926b101 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -16,7 +16,6 @@
 #include <linux/limits.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/smp_lock.h>
 #include <linux/sysctl.h>
 #include <linux/slab.h>
 
@@ -66,11 +65,18 @@ static struct inode *proc_alloc_inode(struct super_block *sb)
 	return inode;
 }
 
-static void proc_destroy_inode(struct inode *inode)
+static void proc_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(proc_inode_cachep, PROC_I(inode));
 }
 
+static void proc_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, proc_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct proc_inode *ei = (struct proc_inode *) foo;
diff --git a/fs/proc/proc_console.c b/fs/proc/proc_console.c
new file mode 100644
index 00000000000..8a707609f52
--- /dev/null
+++ b/fs/proc/proc_console.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2010 Werner Fink, Jiri Slaby
+ *
+ * Licensed under GPLv2
+ */
+
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/tty_driver.h>
+
+/*
+ * This is handler for /proc/consoles
+ */
+static int show_console_dev(struct seq_file *m, void *v)
+{
+	static const struct {
+		short flag;
+		char name;
+	} con_flags[] = {
+		{ CON_ENABLED,		'E' },
+		{ CON_CONSDEV,		'C' },
+		{ CON_BOOT,		'B' },
+		{ CON_PRINTBUFFER,	'p' },
+		{ CON_BRL,		'b' },
+		{ CON_ANYTIME,		'a' },
+	};
+	char flags[ARRAY_SIZE(con_flags) + 1];
+	struct console *con = v;
+	unsigned int a;
+	int len;
+	dev_t dev = 0;
+
+	if (con->device) {
+		const struct tty_driver *driver;
+		int index;
+		driver = con->device(con, &index);
+		if (driver) {
+			dev = MKDEV(driver->major, driver->minor_start);
+			dev += index;
+		}
+	}
+
+	for (a = 0; a < ARRAY_SIZE(con_flags); a++)
+		flags[a] = (con->flags & con_flags[a].flag) ?
+			con_flags[a].name : ' ';
+	flags[a] = 0;
+
+	seq_printf(m, "%s%d%n", con->name, con->index, &len);
+	len = 21 - len;
+	if (len < 1)
+		len = 1;
+	seq_printf(m, "%*c%c%c%c (%s)", len, ' ', con->read ? 'R' : '-',
+			con->write ? 'W' : '-', con->unblank ? 'U' : '-',
+			flags);
+	if (dev)
+		seq_printf(m, " %4d:%d", MAJOR(dev), MINOR(dev));
+
+	seq_printf(m, "\n");
+
+	return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	struct console *con;
+	loff_t off = 0;
+
+	acquire_console_sem();
+	for_each_console(con)
+		if (off++ == *pos)
+			break;
+
+	return con;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	struct console *con = v;
+	++*pos;
+	return con->next;
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+	release_console_sem();
+}
+
+static const struct seq_operations consoles_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_console_dev
+};
+
+static int consoles_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &consoles_op);
+}
+
+static const struct file_operations proc_consoles_operations = {
+	.open		= consoles_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+static int register_proc_consoles(void)
+{
+	proc_create("consoles", 0, NULL, &proc_consoles_operations);
+	return 0;
+}
+module_init(register_proc_consoles);
diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
index b652cb00906..09a1f92a34e 100644
--- a/fs/proc/proc_sysctl.c
+++ b/fs/proc/proc_sysctl.c
@@ -5,6 +5,7 @@
 #include <linux/sysctl.h>
 #include <linux/proc_fs.h>
 #include <linux/security.h>
+#include <linux/namei.h>
 #include "internal.h"
 
 static const struct dentry_operations proc_sys_dentry_operations;
@@ -120,7 +121,7 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry,
 		goto out;
 
 	err = NULL;
-	dentry->d_op = &proc_sys_dentry_operations;
+	d_set_d_op(dentry, &proc_sys_dentry_operations);
 	d_add(dentry, inode);
 
 out:
@@ -201,7 +202,7 @@ static int proc_sys_fill_cache(struct file *filp, void *dirent,
 				dput(child);
 				return -ENOMEM;
 			} else {
-				child->d_op = &proc_sys_dentry_operations;
+				d_set_d_op(child, &proc_sys_dentry_operations);
 				d_add(child, inode);
 			}
 		} else {
@@ -294,7 +295,7 @@ out:
 	return ret;
 }
 
-static int proc_sys_permission(struct inode *inode, int mask)
+static int proc_sys_permission(struct inode *inode, int mask,unsigned int flags)
 {
 	/*
 	 * sysctl entries that are not writeable,
@@ -304,6 +305,9 @@ static int proc_sys_permission(struct inode *inode, int mask)
 	struct ctl_table *table;
 	int error;
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	/* Executable files are not allowed under /proc/sys/ */
 	if ((mask & MAY_EXEC) && S_ISREG(inode->i_mode))
 		return -EACCES;
@@ -389,23 +393,30 @@ static const struct inode_operations proc_sys_dir_operations = {
 
 static int proc_sys_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
 	return !PROC_I(dentry->d_inode)->sysctl->unregistering;
 }
 
-static int proc_sys_delete(struct dentry *dentry)
+static int proc_sys_delete(const struct dentry *dentry)
 {
 	return !!PROC_I(dentry->d_inode)->sysctl->unregistering;
 }
 
-static int proc_sys_compare(struct dentry *dir, struct qstr *qstr,
-			    struct qstr *name)
+static int proc_sys_compare(const struct dentry *parent,
+		const struct inode *pinode,
+		const struct dentry *dentry, const struct inode *inode,
+		unsigned int len, const char *str, const struct qstr *name)
 {
-	struct dentry *dentry = container_of(qstr, struct dentry, d_name);
-	if (qstr->len != name->len)
+	/* Although proc doesn't have negative dentries, rcu-walk means
+	 * that inode here can be NULL */
+	if (!inode)
+		return 0;
+	if (name->len != len)
 		return 1;
-	if (memcmp(qstr->name, name->name, name->len))
+	if (memcmp(name->name, str, len))
 		return 1;
-	return !sysctl_is_seen(PROC_I(dentry->d_inode)->sysctl);
+	return !sysctl_is_seen(PROC_I(inode)->sysctl);
 }
 
 static const struct dentry_operations proc_sys_dentry_operations = {
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index da6b01d70f0..c126c83b9a4 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -706,6 +706,7 @@ static int pagemap_hugetlb_range(pte_t *pte, unsigned long hmask,
  * skip over unmapped regions.
  */
 #define PAGEMAP_WALK_SIZE	(PMD_SIZE)
+#define PAGEMAP_WALK_MASK	(PMD_MASK)
 static ssize_t pagemap_read(struct file *file, char __user *buf,
 			    size_t count, loff_t *ppos)
 {
@@ -776,7 +777,7 @@ static ssize_t pagemap_read(struct file *file, char __user *buf,
 		unsigned long end;
 
 		pm.pos = 0;
-		end = start_vaddr + PAGEMAP_WALK_SIZE;
+		end = (start_vaddr + PAGEMAP_WALK_SIZE) & PAGEMAP_WALK_MASK;
 		/* overflow ? */
 		if (end < start_vaddr || end > end_vaddr)
 			end = end_vaddr;
diff --git a/fs/proc/vmcore.c b/fs/proc/vmcore.c
index 2367fb3f70b..74802bc5ded 100644
--- a/fs/proc/vmcore.c
+++ b/fs/proc/vmcore.c
@@ -499,7 +499,7 @@ static int __init parse_crash_elf64_headers(void)
 	/* Do some basic Verification. */
 	if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0 ||
 		(ehdr.e_type != ET_CORE) ||
-		!vmcore_elf_check_arch(&ehdr) ||
+		!vmcore_elf64_check_arch(&ehdr) ||
 		ehdr.e_ident[EI_CLASS] != ELFCLASS64 ||
 		ehdr.e_ident[EI_VERSION] != EV_CURRENT ||
 		ehdr.e_version != EV_CURRENT ||
diff --git a/fs/qnx4/inode.c b/fs/qnx4/inode.c
index fcada42f1aa..e63b4171d58 100644
--- a/fs/qnx4/inode.c
+++ b/fs/qnx4/inode.c
@@ -425,11 +425,18 @@ static struct inode *qnx4_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void qnx4_destroy_inode(struct inode *inode)
+static void qnx4_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(qnx4_inode_cachep, qnx4_i(inode));
 }
 
+static void qnx4_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, qnx4_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct qnx4_inode_info *ei = (struct qnx4_inode_info *) foo;
diff --git a/fs/read_write.c b/fs/read_write.c
index 431a0ed610c..5d431bacbea 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -9,7 +9,6 @@
 #include <linux/fcntl.h>
 #include <linux/file.h>
 #include <linux/uio.h>
-#include <linux/smp_lock.h>
 #include <linux/fsnotify.h>
 #include <linux/security.h>
 #include <linux/module.h>
diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c
index 41656d40dc5..0bae036831e 100644
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -8,7 +8,6 @@
 #include <linux/reiserfs_acl.h>
 #include <linux/reiserfs_xattr.h>
 #include <linux/exportfs.h>
-#include <linux/smp_lock.h>
 #include <linux/pagemap.h>
 #include <linux/highmem.h>
 #include <linux/slab.h>
diff --git a/fs/reiserfs/ioctl.c b/fs/reiserfs/ioctl.c
index adf22b485ce..79265fdc317 100644
--- a/fs/reiserfs/ioctl.c
+++ b/fs/reiserfs/ioctl.c
@@ -9,7 +9,6 @@
 #include <linux/time.h>
 #include <asm/uaccess.h>
 #include <linux/pagemap.h>
-#include <linux/smp_lock.h>
 #include <linux/compat.h>
 
 /*
@@ -184,12 +183,11 @@ int reiserfs_unpack(struct inode *inode, struct file *filp)
 		return 0;
 	}
 
-	/* we need to make sure nobody is changing the file size beneath
-	 ** us
-	 */
-	reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
 	depth = reiserfs_write_lock_once(inode->i_sb);
 
+	/* we need to make sure nobody is changing the file size beneath us */
+	reiserfs_mutex_lock_safe(&inode->i_mutex, inode->i_sb);
+
 	write_from = inode->i_size & (blocksize - 1);
 	/* if we are on a block boundary, we are already unpacked.  */
 	if (write_from == 0) {
diff --git a/fs/reiserfs/journal.c b/fs/reiserfs/journal.c
index 076c8b19468..d31bce1a9f9 100644
--- a/fs/reiserfs/journal.c
+++ b/fs/reiserfs/journal.c
@@ -43,7 +43,6 @@
 #include <linux/fcntl.h>
 #include <linux/stat.h>
 #include <linux/string.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/workqueue.h>
 #include <linux/writeback.h>
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 3bf7a6457f4..2575682a9ea 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -28,7 +28,6 @@
 #include <linux/mount.h>
 #include <linux/namei.h>
 #include <linux/crc32.h>
-#include <linux/smp_lock.h>
 
 struct file_system_type reiserfs_fs_type;
 
@@ -530,11 +529,18 @@ static struct inode *reiserfs_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void reiserfs_destroy_inode(struct inode *inode)
+static void reiserfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(reiserfs_inode_cachep, REISERFS_I(inode));
 }
 
+static void reiserfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, reiserfs_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct reiserfs_inode_info *ei = (struct reiserfs_inode_info *)foo;
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index 5d04a7828e7..3cfb2e93364 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -870,11 +870,14 @@ out:
 	return err;
 }
 
-static int reiserfs_check_acl(struct inode *inode, int mask)
+static int reiserfs_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
 	struct posix_acl *acl;
 	int error = -EAGAIN; /* do regular unix permission checks by default */
 
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
 	acl = reiserfs_get_acl(inode, ACL_TYPE_ACCESS);
 
 	if (acl) {
@@ -951,8 +954,10 @@ static int xattr_mount_check(struct super_block *s)
 	return 0;
 }
 
-int reiserfs_permission(struct inode *inode, int mask)
+int reiserfs_permission(struct inode *inode, int mask, unsigned int flags)
 {
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
 	/*
 	 * We don't do permission checks on the internal objects.
 	 * Permissions are determined by the "owning" object.
@@ -965,13 +970,16 @@ int reiserfs_permission(struct inode *inode, int mask)
 	 * Stat data v1 doesn't support ACLs.
 	 */
 	if (get_inode_sd_version(inode) != STAT_DATA_V1)
-		return generic_permission(inode, mask, reiserfs_check_acl);
+		return generic_permission(inode, mask, flags,
+					reiserfs_check_acl);
 #endif
-	return generic_permission(inode, mask, NULL);
+	return generic_permission(inode, mask, flags, NULL);
 }
 
 static int xattr_hide_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
 	return -EPERM;
 }
 
@@ -990,7 +998,7 @@ int reiserfs_lookup_privroot(struct super_block *s)
 				strlen(PRIVROOT_NAME));
 	if (!IS_ERR(dentry)) {
 		REISERFS_SB(s)->priv_root = dentry;
-		dentry->d_op = &xattr_lookup_poison_ops;
+		d_set_d_op(dentry, &xattr_lookup_poison_ops);
 		if (dentry->d_inode)
 			dentry->d_inode->i_flags |= S_PRIVATE;
 	} else
diff --git a/fs/reiserfs/xattr_acl.c b/fs/reiserfs/xattr_acl.c
index 536d697a8a2..90d2fcb67a3 100644
--- a/fs/reiserfs/xattr_acl.c
+++ b/fs/reiserfs/xattr_acl.c
@@ -472,7 +472,9 @@ int reiserfs_acl_chmod(struct inode *inode)
 		struct reiserfs_transaction_handle th;
 		size_t size = reiserfs_xattr_nblocks(inode,
 					     reiserfs_acl_size(clone->a_count));
-		reiserfs_write_lock(inode->i_sb);
+		int depth;
+
+		depth = reiserfs_write_lock_once(inode->i_sb);
 		error = journal_begin(&th, inode->i_sb, size * 2);
 		if (!error) {
 			int error2;
@@ -482,7 +484,7 @@ int reiserfs_acl_chmod(struct inode *inode)
 			if (error2)
 				error = error2;
 		}
-		reiserfs_write_unlock(inode->i_sb);
+		reiserfs_write_unlock_once(inode->i_sb, depth);
 	}
 	posix_acl_release(clone);
 	return error;
diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index 6647f90e55c..2305e3121cb 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -400,11 +400,18 @@ static struct inode *romfs_alloc_inode(struct super_block *sb)
 /*
  * return a spent inode to the slab cache
  */
-static void romfs_destroy_inode(struct inode *inode)
+static void romfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(romfs_inode_cachep, ROMFS_I(inode));
 }
 
+static void romfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, romfs_i_callback);
+}
+
 /*
  * get filesystem statistics
  */
diff --git a/fs/splice.c b/fs/splice.c
index 8f1dfaecc8f..ce2f02579e3 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1311,18 +1311,6 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
 static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
 			       struct pipe_inode_info *opipe,
 			       size_t len, unsigned int flags);
-/*
- * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
- * location, so checking ->i_pipe is not enough to verify that this is a
- * pipe.
- */
-static inline struct pipe_inode_info *pipe_info(struct inode *inode)
-{
-	if (S_ISFIFO(inode->i_mode))
-		return inode->i_pipe;
-
-	return NULL;
-}
 
 /*
  * Determine where to splice to/from.
@@ -1336,8 +1324,8 @@ static long do_splice(struct file *in, loff_t __user *off_in,
 	loff_t offset, *off;
 	long ret;
 
-	ipipe = pipe_info(in->f_path.dentry->d_inode);
-	opipe = pipe_info(out->f_path.dentry->d_inode);
+	ipipe = get_pipe_info(in);
+	opipe = get_pipe_info(out);
 
 	if (ipipe && opipe) {
 		if (off_in || off_out)
@@ -1555,7 +1543,7 @@ static long vmsplice_to_user(struct file *file, const struct iovec __user *iov,
 	int error;
 	long ret;
 
-	pipe = pipe_info(file->f_path.dentry->d_inode);
+	pipe = get_pipe_info(file);
 	if (!pipe)
 		return -EBADF;
 
@@ -1642,7 +1630,7 @@ static long vmsplice_to_pipe(struct file *file, const struct iovec __user *iov,
 	};
 	long ret;
 
-	pipe = pipe_info(file->f_path.dentry->d_inode);
+	pipe = get_pipe_info(file);
 	if (!pipe)
 		return -EBADF;
 
@@ -2022,8 +2010,8 @@ static int link_pipe(struct pipe_inode_info *ipipe,
 static long do_tee(struct file *in, struct file *out, size_t len,
 		   unsigned int flags)
 {
-	struct pipe_inode_info *ipipe = pipe_info(in->f_path.dentry->d_inode);
-	struct pipe_inode_info *opipe = pipe_info(out->f_path.dentry->d_inode);
+	struct pipe_inode_info *ipipe = get_pipe_info(in);
+	struct pipe_inode_info *opipe = get_pipe_info(out);
 	int ret = -EINVAL;
 
 	/*
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 24de30ba34c..20700b9f2b4 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -440,11 +440,18 @@ static struct inode *squashfs_alloc_inode(struct super_block *sb)
 }
 
 
-static void squashfs_destroy_inode(struct inode *inode)
+static void squashfs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(squashfs_inode_cachep, squashfs_i(inode));
 }
 
+static void squashfs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, squashfs_i_callback);
+}
+
 
 static struct file_system_type squashfs_fs_type = {
 	.owner = THIS_MODULE,
diff --git a/fs/super.c b/fs/super.c
index ca696155cd9..823e061faa8 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -30,6 +30,7 @@
 #include <linux/idr.h>
 #include <linux/mutex.h>
 #include <linux/backing-dev.h>
+#include <linux/rculist_bl.h>
 #include "internal.h"
 
 
@@ -71,7 +72,7 @@ static struct super_block *alloc_super(struct file_system_type *type)
 		INIT_LIST_HEAD(&s->s_files);
 #endif
 		INIT_LIST_HEAD(&s->s_instances);
-		INIT_HLIST_HEAD(&s->s_anon);
+		INIT_HLIST_BL_HEAD(&s->s_anon);
 		INIT_LIST_HEAD(&s->s_inodes);
 		INIT_LIST_HEAD(&s->s_dentry_lru);
 		init_rwsem(&s->s_umount);
@@ -1139,7 +1140,7 @@ static struct vfsmount *fs_set_subtype(struct vfsmount *mnt, const char *fstype)
 	return mnt;
 
  err:
-	mntput(mnt);
+	mntput_long(mnt);
 	return ERR_PTR(err);
 }
 
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 7e54bac8c4b..ea9120a830d 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -231,7 +231,7 @@ void release_sysfs_dirent(struct sysfs_dirent * sd)
 		goto repeat;
 }
 
-static int sysfs_dentry_delete(struct dentry *dentry)
+static int sysfs_dentry_delete(const struct dentry *dentry)
 {
 	struct sysfs_dirent *sd = dentry->d_fsdata;
 	return !!(sd->s_flags & SYSFS_FLAG_REMOVED);
@@ -239,9 +239,13 @@ static int sysfs_dentry_delete(struct dentry *dentry)
 
 static int sysfs_dentry_revalidate(struct dentry *dentry, struct nameidata *nd)
 {
-	struct sysfs_dirent *sd = dentry->d_fsdata;
+	struct sysfs_dirent *sd;
 	int is_dir;
 
+	if (nd->flags & LOOKUP_RCU)
+		return -ECHILD;
+
+	sd = dentry->d_fsdata;
 	mutex_lock(&sysfs_mutex);
 
 	/* The sysfs dirent has been deleted */
@@ -701,7 +705,7 @@ static struct dentry * sysfs_lookup(struct inode *dir, struct dentry *dentry,
 	/* instantiate and hash dentry */
 	ret = d_find_alias(inode);
 	if (!ret) {
-		dentry->d_op = &sysfs_dentry_ops;
+		d_set_d_op(dentry, &sysfs_dentry_ops);
 		dentry->d_fsdata = sysfs_get(sd);
 		d_add(dentry, inode);
 	} else {
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index cffb1fd8ba3..30ac2734558 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -348,13 +348,18 @@ int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const void *ns, const cha
 		return -ENOENT;
 }
 
-int sysfs_permission(struct inode *inode, int mask)
+int sysfs_permission(struct inode *inode, int mask, unsigned int flags)
 {
-	struct sysfs_dirent *sd = inode->i_private;
+	struct sysfs_dirent *sd;
+
+	if (flags & IPERM_FLAG_RCU)
+		return -ECHILD;
+
+	sd = inode->i_private;
 
 	mutex_lock(&sysfs_mutex);
 	sysfs_refresh_inode(sd, inode);
 	mutex_unlock(&sysfs_mutex);
 
-	return generic_permission(inode, mask, NULL);
+	return generic_permission(inode, mask, flags, NULL);
 }
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index d9be60a2e95..ffaaa816bfb 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -200,7 +200,7 @@ static inline void __sysfs_put(struct sysfs_dirent *sd)
 struct inode *sysfs_get_inode(struct super_block *sb, struct sysfs_dirent *sd);
 void sysfs_evict_inode(struct inode *inode);
 int sysfs_sd_setattr(struct sysfs_dirent *sd, struct iattr *iattr);
-int sysfs_permission(struct inode *inode, int mask);
+int sysfs_permission(struct inode *inode, int mask, unsigned int flags);
 int sysfs_setattr(struct dentry *dentry, struct iattr *iattr);
 int sysfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat);
 int sysfs_setxattr(struct dentry *dentry, const char *name, const void *value,
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c
index de44d067b9e..0630eb969a2 100644
--- a/fs/sysv/inode.c
+++ b/fs/sysv/inode.c
@@ -333,11 +333,18 @@ static struct inode *sysv_alloc_inode(struct super_block *sb)
 	return &si->vfs_inode;
 }
 
-static void sysv_destroy_inode(struct inode *inode)
+static void sysv_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(sysv_inode_cachep, SYSV_I(inode));
 }
 
+static void sysv_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, sysv_i_callback);
+}
+
 static void init_once(void *p)
 {
 	struct sysv_inode_info *si = (struct sysv_inode_info *)p;
diff --git a/fs/sysv/namei.c b/fs/sysv/namei.c
index 11e7f7d11cd..b5e68da2db3 100644
--- a/fs/sysv/namei.c
+++ b/fs/sysv/namei.c
@@ -27,7 +27,8 @@ static int add_nondir(struct dentry *dentry, struct inode *inode)
 	return err;
 }
 
-static int sysv_hash(struct dentry *dentry, struct qstr *qstr)
+static int sysv_hash(const struct dentry *dentry, const struct inode *inode,
+		struct qstr *qstr)
 {
 	/* Truncate the name in place, avoids having to define a compare
 	   function. */
@@ -47,7 +48,7 @@ static struct dentry *sysv_lookup(struct inode * dir, struct dentry * dentry, st
 	struct inode * inode = NULL;
 	ino_t ino;
 
-	dentry->d_op = dir->i_sb->s_root->d_op;
+	d_set_d_op(dentry, dir->i_sb->s_root->d_op);
 	if (dentry->d_name.len > SYSV_NAMELEN)
 		return ERR_PTR(-ENAMETOOLONG);
 	ino = sysv_inode_by_name(dentry);
diff --git a/fs/sysv/super.c b/fs/sysv/super.c
index 3d9c62be0c1..76712aefc4a 100644
--- a/fs/sysv/super.c
+++ b/fs/sysv/super.c
@@ -346,7 +346,7 @@ static int complete_read_super(struct super_block *sb, int silent, int size)
 	if (sbi->s_forced_ro)
 		sb->s_flags |= MS_RDONLY;
 	if (sbi->s_truncate)
-		sb->s_root->d_op = &sysv_dentry_operations;
+		d_set_d_op(sb->s_root, &sysv_dentry_operations);
 	return 1;
 }
 
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 91fac54c70e..6e11c2975dc 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -272,12 +272,20 @@ static struct inode *ubifs_alloc_inode(struct super_block *sb)
 	return &ui->vfs_inode;
 };
 
+static void ubifs_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	struct ubifs_inode *ui = ubifs_inode(inode);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(ubifs_inode_slab, ui);
+}
+
 static void ubifs_destroy_inode(struct inode *inode)
 {
 	struct ubifs_inode *ui = ubifs_inode(inode);
 
 	kfree(ui->data);
-	kmem_cache_free(ubifs_inode_slab, inode);
+	call_rcu(&inode->i_rcu, ubifs_i_callback);
 }
 
 /*
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 4a5c7c61836..b539d53320f 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -139,11 +139,18 @@ static struct inode *udf_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void udf_destroy_inode(struct inode *inode)
+static void udf_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(udf_inode_cachep, UDF_I(inode));
 }
 
+static void udf_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, udf_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct udf_inode_info *ei = (struct udf_inode_info *)foo;
diff --git a/fs/ufs/super.c b/fs/ufs/super.c
index 2c47daed56d..2c61ac5d4e4 100644
--- a/fs/ufs/super.c
+++ b/fs/ufs/super.c
@@ -1412,11 +1412,18 @@ static struct inode *ufs_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void ufs_destroy_inode(struct inode *inode)
+static void ufs_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(ufs_inode_cachep, UFS_I(inode));
 }
 
+static void ufs_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, ufs_i_callback);
+}
+
 static void init_once(void *foo)
 {
 	struct ufs_inode_info *ei = (struct ufs_inode_info *) foo;
diff --git a/fs/xfs/linux-2.6/xfs_acl.c b/fs/xfs/linux-2.6/xfs_acl.c
index b2771862fd3..39f4f809bb6 100644
--- a/fs/xfs/linux-2.6/xfs_acl.c
+++ b/fs/xfs/linux-2.6/xfs_acl.c
@@ -219,12 +219,13 @@ xfs_set_acl(struct inode *inode, int type, struct posix_acl *acl)
 }
 
 int
-xfs_check_acl(struct inode *inode, int mask)
+xfs_check_acl(struct inode *inode, int mask, unsigned int flags)
 {
-	struct xfs_inode *ip = XFS_I(inode);
+	struct xfs_inode *ip;
 	struct posix_acl *acl;
 	int error = -EAGAIN;
 
+	ip = XFS_I(inode);
 	trace_xfs_check_acl(ip);
 
 	/*
@@ -234,6 +235,12 @@ xfs_check_acl(struct inode *inode, int mask)
 	if (!XFS_IFORK_Q(ip))
 		return -EAGAIN;
 
+	if (flags & IPERM_FLAG_RCU) {
+		if (!negative_cached_acl(inode, ACL_TYPE_ACCESS))
+			return -ECHILD;
+		return -EAGAIN;
+	}
+
 	acl = xfs_get_acl(inode, ACL_TYPE_ACCESS);
 	if (IS_ERR(acl))
 		return PTR_ERR(acl);
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index c9af48fffcd..691f61223ed 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -934,7 +934,6 @@ xfs_aops_discard_page(
 	struct xfs_inode	*ip = XFS_I(inode);
 	struct buffer_head	*bh, *head;
 	loff_t			offset = page_offset(page);
-	ssize_t			len = 1 << inode->i_blkbits;
 
 	if (!xfs_is_delayed_page(page, IO_DELAY))
 		goto out_invalidate;
@@ -949,58 +948,14 @@ xfs_aops_discard_page(
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
 	bh = head = page_buffers(page);
 	do {
-		int		done;
-		xfs_fileoff_t	offset_fsb;
-		xfs_bmbt_irec_t	imap;
-		int		nimaps = 1;
 		int		error;
-		xfs_fsblock_t	firstblock;
-		xfs_bmap_free_t flist;
+		xfs_fileoff_t	start_fsb;
 
 		if (!buffer_delay(bh))
 			goto next_buffer;
 
-		offset_fsb = XFS_B_TO_FSBT(ip->i_mount, offset);
-
-		/*
-		 * Map the range first and check that it is a delalloc extent
-		 * before trying to unmap the range. Otherwise we will be
-		 * trying to remove a real extent (which requires a
-		 * transaction) or a hole, which is probably a bad idea...
-		 */
-		error = xfs_bmapi(NULL, ip, offset_fsb, 1,
-				XFS_BMAPI_ENTIRE,  NULL, 0, &imap,
-				&nimaps, NULL);
-
-		if (error) {
-			/* something screwed, just bail */
-			if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
-				xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
-				"page discard failed delalloc mapping lookup.");
-			}
-			break;
-		}
-		if (!nimaps) {
-			/* nothing there */
-			goto next_buffer;
-		}
-		if (imap.br_startblock != DELAYSTARTBLOCK) {
-			/* been converted, ignore */
-			goto next_buffer;
-		}
-		WARN_ON(imap.br_blockcount == 0);
-
-		/*
-		 * Note: while we initialise the firstblock/flist pair, they
-		 * should never be used because blocks should never be
-		 * allocated or freed for a delalloc extent and hence we need
-		 * don't cancel or finish them after the xfs_bunmapi() call.
-		 */
-		xfs_bmap_init(&flist, &firstblock);
-		error = xfs_bunmapi(NULL, ip, offset_fsb, 1, 0, 1, &firstblock,
-					&flist, &done);
-
-		ASSERT(!flist.xbf_count && !flist.xbf_first);
+		start_fsb = XFS_B_TO_FSBT(ip->i_mount, offset);
+		error = xfs_bmap_punch_delalloc_range(ip, start_fsb, 1);
 		if (error) {
 			/* something screwed, just bail */
 			if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
@@ -1010,7 +965,7 @@ xfs_aops_discard_page(
 			break;
 		}
 next_buffer:
-		offset += len;
+		offset += 1 << inode->i_blkbits;
 
 	} while ((bh = bh->b_this_page) != head);
 
@@ -1111,11 +1066,12 @@ xfs_vm_writepage(
 			uptodate = 0;
 
 		/*
-		 * A hole may still be marked uptodate because discard_buffer
-		 * leaves the flag set.
+		 * set_page_dirty dirties all buffers in a page, independent
+		 * of their state.  The dirty state however is entirely
+		 * meaningless for holes (!mapped && uptodate), so skip
+		 * buffers covering holes here.
 		 */
 		if (!buffer_mapped(bh) && buffer_uptodate(bh)) {
-			ASSERT(!buffer_dirty(bh));
 			imap_valid = 0;
 			continue;
 		}
@@ -1504,11 +1460,42 @@ xfs_vm_write_failed(
 	struct inode		*inode = mapping->host;
 
 	if (to > inode->i_size) {
-		struct iattr	ia = {
-			.ia_valid	= ATTR_SIZE | ATTR_FORCE,
-			.ia_size	= inode->i_size,
-		};
-		xfs_setattr(XFS_I(inode), &ia, XFS_ATTR_NOLOCK);
+		/*
+		 * punch out the delalloc blocks we have already allocated. We
+		 * don't call xfs_setattr() to do this as we may be in the
+		 * middle of a multi-iovec write and so the vfs inode->i_size
+		 * will not match the xfs ip->i_size and so it will zero too
+		 * much. Hence we jus truncate the page cache to zero what is
+		 * necessary and punch the delalloc blocks directly.
+		 */
+		struct xfs_inode	*ip = XFS_I(inode);
+		xfs_fileoff_t		start_fsb;
+		xfs_fileoff_t		end_fsb;
+		int			error;
+
+		truncate_pagecache(inode, to, inode->i_size);
+
+		/*
+		 * Check if there are any blocks that are outside of i_size
+		 * that need to be trimmed back.
+		 */
+		start_fsb = XFS_B_TO_FSB(ip->i_mount, inode->i_size) + 1;
+		end_fsb = XFS_B_TO_FSB(ip->i_mount, to);
+		if (end_fsb <= start_fsb)
+			return;
+
+		xfs_ilock(ip, XFS_ILOCK_EXCL);
+		error = xfs_bmap_punch_delalloc_range(ip, start_fsb,
+							end_fsb - start_fsb);
+		if (error) {
+			/* something screwed, just bail */
+			if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+				xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
+			"xfs_vm_write_failed: unable to clean up ino %lld",
+						ip->i_ino);
+			}
+		}
+		xfs_iunlock(ip, XFS_ILOCK_EXCL);
 	}
 }
 
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 63fd2c07cb5..4c5deb6e9e3 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -488,29 +488,16 @@ found:
 	spin_unlock(&pag->pag_buf_lock);
 	xfs_perag_put(pag);
 
-	/* Attempt to get the semaphore without sleeping,
-	 * if this does not work then we need to drop the
-	 * spinlock and do a hard attempt on the semaphore.
-	 */
-	if (down_trylock(&bp->b_sema)) {
+	if (xfs_buf_cond_lock(bp)) {
+		/* failed, so wait for the lock if requested. */
 		if (!(flags & XBF_TRYLOCK)) {
-			/* wait for buffer ownership */
 			xfs_buf_lock(bp);
 			XFS_STATS_INC(xb_get_locked_waited);
 		} else {
-			/* We asked for a trylock and failed, no need
-			 * to look at file offset and length here, we
-			 * know that this buffer at least overlaps our
-			 * buffer and is locked, therefore our buffer
-			 * either does not exist, or is this buffer.
-			 */
 			xfs_buf_rele(bp);
 			XFS_STATS_INC(xb_busy_locked);
 			return NULL;
 		}
-	} else {
-		/* trylock worked */
-		XB_SET_OWNER(bp);
 	}
 
 	if (bp->b_flags & XBF_STALE) {
@@ -876,10 +863,18 @@ xfs_buf_rele(
  */
 
 /*
- *	Locks a buffer object, if it is not already locked.
- *	Note that this in no way locks the underlying pages, so it is only
- *	useful for synchronizing concurrent use of buffer objects, not for
- *	synchronizing independent access to the underlying pages.
+ *	Locks a buffer object, if it is not already locked.  Note that this in
+ *	no way locks the underlying pages, so it is only useful for
+ *	synchronizing concurrent use of buffer objects, not for synchronizing
+ *	independent access to the underlying pages.
+ *
+ *	If we come across a stale, pinned, locked buffer, we know that we are
+ *	being asked to lock a buffer that has been reallocated. Because it is
+ *	pinned, we know that the log has not been pushed to disk and hence it
+ *	will still be locked.  Rather than continuing to have trylock attempts
+ *	fail until someone else pushes the log, push it ourselves before
+ *	returning.  This means that the xfsaild will not get stuck trying
+ *	to push on stale inode buffers.
  */
 int
 xfs_buf_cond_lock(
@@ -890,6 +885,8 @@ xfs_buf_cond_lock(
 	locked = down_trylock(&bp->b_sema) == 0;
 	if (locked)
 		XB_SET_OWNER(bp);
+	else if (atomic_read(&bp->b_pin_count) && (bp->b_flags & XBF_STALE))
+		xfs_log_force(bp->b_target->bt_mount, 0);
 
 	trace_xfs_buf_cond_lock(bp, _RET_IP_);
 	return locked ? 0 : -EBUSY;
@@ -1781,7 +1778,6 @@ xfs_buf_delwri_split(
 	INIT_LIST_HEAD(list);
 	spin_lock(dwlk);
 	list_for_each_entry_safe(bp, n, dwq, b_list) {
-		trace_xfs_buf_delwri_split(bp, _RET_IP_);
 		ASSERT(bp->b_flags & XBF_DELWRI);
 
 		if (!XFS_BUF_ISPINNED(bp) && !xfs_buf_cond_lock(bp)) {
@@ -1795,6 +1791,7 @@ xfs_buf_delwri_split(
 					 _XBF_RUN_QUEUES);
 			bp->b_flags |= XBF_WRITE;
 			list_move_tail(&bp->b_list, list);
+			trace_xfs_buf_delwri_split(bp, _RET_IP_);
 		} else
 			skipped++;
 	}
diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c
index 2ea238f6d38..ad442d9e392 100644
--- a/fs/xfs/linux-2.6/xfs_ioctl.c
+++ b/fs/xfs/linux-2.6/xfs_ioctl.c
@@ -416,7 +416,7 @@ xfs_attrlist_by_handle(
 	if (IS_ERR(dentry))
 		return PTR_ERR(dentry);
 
-	kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL);
+	kbuf = kzalloc(al_hreq.buflen, GFP_KERNEL);
 	if (!kbuf)
 		goto out_dput;
 
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 96107efc0c6..94d5fd6a297 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -762,7 +762,8 @@ xfs_setup_inode(
 	inode->i_state = I_NEW;
 
 	inode_sb_list_add(inode);
-	insert_inode_hash(inode);
+	/* make the inode look hashed for the writeback code */
+	hlist_add_fake(&inode->i_hash);
 
 	inode->i_mode	= ip->i_d.di_mode;
 	inode->i_nlink	= ip->i_d.di_nlink;
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 9f3a78fe6ae..064f964d4f3 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -353,9 +353,6 @@ xfs_parseargs(
 			mp->m_qflags &= ~XFS_OQUOTA_ENFD;
 		} else if (!strcmp(this_char, MNTOPT_DELAYLOG)) {
 			mp->m_flags |= XFS_MOUNT_DELAYLOG;
-			cmn_err(CE_WARN,
-				"Enabling EXPERIMENTAL delayed logging feature "
-				"- use at your own risk.\n");
 		} else if (!strcmp(this_char, MNTOPT_NODELAYLOG)) {
 			mp->m_flags &= ~XFS_MOUNT_DELAYLOG;
 		} else if (!strcmp(this_char, "ihashsize")) {
diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c
index 37d33254981..afb0d7cfad1 100644
--- a/fs/xfs/linux-2.6/xfs_sync.c
+++ b/fs/xfs/linux-2.6/xfs_sync.c
@@ -853,6 +853,7 @@ restart:
 		if (trylock) {
 			if (!mutex_trylock(&pag->pag_ici_reclaim_lock)) {
 				skipped++;
+				xfs_perag_put(pag);
 				continue;
 			}
 			first_index = pag->pag_ici_reclaim_cursor;
diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h
index 0135e2a669d..11dd72070cb 100644
--- a/fs/xfs/xfs_acl.h
+++ b/fs/xfs/xfs_acl.h
@@ -42,7 +42,7 @@ struct xfs_acl {
 #define SGI_ACL_DEFAULT_SIZE	(sizeof(SGI_ACL_DEFAULT)-1)
 
 #ifdef CONFIG_XFS_POSIX_ACL
-extern int xfs_check_acl(struct inode *inode, int mask);
+extern int xfs_check_acl(struct inode *inode, int mask, unsigned int flags);
 extern struct posix_acl *xfs_get_acl(struct inode *inode, int type);
 extern int xfs_inherit_acl(struct inode *inode, struct posix_acl *default_acl);
 extern int xfs_acl_chmod(struct inode *inode);
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 8abd12e32e1..4111cd3966c 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -5471,8 +5471,13 @@ xfs_getbmap(
 			if (error)
 				goto out_unlock_iolock;
 		}
-
-		ASSERT(ip->i_delayed_blks == 0);
+		/*
+		 * even after flushing the inode, there can still be delalloc
+		 * blocks on the inode beyond EOF due to speculative
+		 * preallocation. These are not removed until the release
+		 * function is called or the inode is inactivated. Hence we
+		 * cannot assert here that ip->i_delayed_blks == 0.
+		 */
 	}
 
 	lock = xfs_ilock_map_shared(ip);
@@ -6070,3 +6075,79 @@ xfs_bmap_disk_count_leaves(
 		*count += xfs_bmbt_disk_get_blockcount(frp);
 	}
 }
+
+/*
+ * dead simple method of punching delalyed allocation blocks from a range in
+ * the inode. Walks a block at a time so will be slow, but is only executed in
+ * rare error cases so the overhead is not critical. This will alays punch out
+ * both the start and end blocks, even if the ranges only partially overlap
+ * them, so it is up to the caller to ensure that partial blocks are not
+ * passed in.
+ */
+int
+xfs_bmap_punch_delalloc_range(
+	struct xfs_inode	*ip,
+	xfs_fileoff_t		start_fsb,
+	xfs_fileoff_t		length)
+{
+	xfs_fileoff_t		remaining = length;
+	int			error = 0;
+
+	ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
+
+	do {
+		int		done;
+		xfs_bmbt_irec_t	imap;
+		int		nimaps = 1;
+		xfs_fsblock_t	firstblock;
+		xfs_bmap_free_t flist;
+
+		/*
+		 * Map the range first and check that it is a delalloc extent
+		 * before trying to unmap the range. Otherwise we will be
+		 * trying to remove a real extent (which requires a
+		 * transaction) or a hole, which is probably a bad idea...
+		 */
+		error = xfs_bmapi(NULL, ip, start_fsb, 1,
+				XFS_BMAPI_ENTIRE,  NULL, 0, &imap,
+				&nimaps, NULL);
+
+		if (error) {
+			/* something screwed, just bail */
+			if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+				xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
+			"Failed delalloc mapping lookup ino %lld fsb %lld.",
+						ip->i_ino, start_fsb);
+			}
+			break;
+		}
+		if (!nimaps) {
+			/* nothing there */
+			goto next_block;
+		}
+		if (imap.br_startblock != DELAYSTARTBLOCK) {
+			/* been converted, ignore */
+			goto next_block;
+		}
+		WARN_ON(imap.br_blockcount == 0);
+
+		/*
+		 * Note: while we initialise the firstblock/flist pair, they
+		 * should never be used because blocks should never be
+		 * allocated or freed for a delalloc extent and hence we need
+		 * don't cancel or finish them after the xfs_bunmapi() call.
+		 */
+		xfs_bmap_init(&flist, &firstblock);
+		error = xfs_bunmapi(NULL, ip, start_fsb, 1, 0, 1, &firstblock,
+					&flist, &done);
+		if (error)
+			break;
+
+		ASSERT(!flist.xbf_count && !flist.xbf_first);
+next_block:
+		start_fsb++;
+		remaining--;
+	} while(remaining > 0);
+
+	return error;
+}
diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h
index 71ec9b6ecdf..3651191daea 100644
--- a/fs/xfs/xfs_bmap.h
+++ b/fs/xfs/xfs_bmap.h
@@ -394,6 +394,11 @@ xfs_bmap_count_blocks(
 	int			whichfork,
 	int			*count);
 
+int
+xfs_bmap_punch_delalloc_range(
+	struct xfs_inode	*ip,
+	xfs_fileoff_t		start_fsb,
+	xfs_fileoff_t		length);
 #endif	/* __KERNEL__ */
 
 #endif	/* __XFS_BMAP_H__ */
diff --git a/fs/xfs/xfs_dfrag.c b/fs/xfs/xfs_dfrag.c
index 3b9582c60a2..e60490bc00a 100644
--- a/fs/xfs/xfs_dfrag.c
+++ b/fs/xfs/xfs_dfrag.c
@@ -377,6 +377,19 @@ xfs_swap_extents(
 	ip->i_d.di_format = tip->i_d.di_format;
 	tip->i_d.di_format = tmp;
 
+	/*
+	 * The extents in the source inode could still contain speculative
+	 * preallocation beyond EOF (e.g. the file is open but not modified
+	 * while defrag is in progress). In that case, we need to copy over the
+	 * number of delalloc blocks the data fork in the source inode is
+	 * tracking beyond EOF so that when the fork is truncated away when the
+	 * temporary inode is unlinked we don't underrun the i_delayed_blks
+	 * counter on that inode.
+	 */
+	ASSERT(tip->i_delayed_blks == 0);
+	tip->i_delayed_blks = ip->i_delayed_blks;
+	ip->i_delayed_blks = 0;
+
 	ilf_fields = XFS_ILOG_CORE;
 
 	switch(ip->i_d.di_format) {
diff --git a/fs/xfs/xfs_error.c b/fs/xfs/xfs_error.c
index ed999026766..c78cc6a3d87 100644
--- a/fs/xfs/xfs_error.c
+++ b/fs/xfs/xfs_error.c
@@ -58,6 +58,7 @@ xfs_error_trap(int e)
 int	xfs_etest[XFS_NUM_INJECT_ERROR];
 int64_t	xfs_etest_fsid[XFS_NUM_INJECT_ERROR];
 char *	xfs_etest_fsname[XFS_NUM_INJECT_ERROR];
+int	xfs_error_test_active;
 
 int
 xfs_error_test(int error_tag, int *fsidp, char *expression,
@@ -108,6 +109,7 @@ xfs_errortag_add(int error_tag, xfs_mount_t *mp)
 			len = strlen(mp->m_fsname);
 			xfs_etest_fsname[i] = kmem_alloc(len + 1, KM_SLEEP);
 			strcpy(xfs_etest_fsname[i], mp->m_fsname);
+			xfs_error_test_active++;
 			return 0;
 		}
 	}
@@ -137,6 +139,7 @@ xfs_errortag_clearall(xfs_mount_t *mp, int loud)
 			xfs_etest_fsid[i] = 0LL;
 			kmem_free(xfs_etest_fsname[i]);
 			xfs_etest_fsname[i] = NULL;
+			xfs_error_test_active--;
 		}
 	}
 
diff --git a/fs/xfs/xfs_error.h b/fs/xfs/xfs_error.h
index c2c1a072bb8..f338847f80b 100644
--- a/fs/xfs/xfs_error.h
+++ b/fs/xfs/xfs_error.h
@@ -127,13 +127,14 @@ extern void xfs_corruption_error(const char *tag, int level,
 #define	XFS_RANDOM_BMAPIFORMAT				XFS_RANDOM_DEFAULT
 
 #ifdef DEBUG
+extern int xfs_error_test_active;
 extern int xfs_error_test(int, int *, char *, int, char *, unsigned long);
 
 #define	XFS_NUM_INJECT_ERROR				10
 #define XFS_TEST_ERROR(expr, mp, tag, rf)		\
-	((expr) || \
+	((expr) || (xfs_error_test_active && \
 	 xfs_error_test((tag), (mp)->m_fixedfsid, "expr", __LINE__, __FILE__, \
-			(rf)))
+			(rf))))
 
 extern int xfs_errortag_add(int error_tag, xfs_mount_t *mp);
 extern int xfs_errortag_clearall(xfs_mount_t *mp, int loud);
diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index 9b715dce569..9124425b7f2 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -744,9 +744,15 @@ xfs_filestream_new_ag(
 	 * If the file's parent directory is known, take its iolock in exclusive
 	 * mode to prevent two sibling files from racing each other to migrate
 	 * themselves and their parent to different AGs.
+	 *
+	 * Note that we lock the parent directory iolock inside the child
+	 * iolock here.  That's fine as we never hold both parent and child
+	 * iolock in any other place.  This is different from the ilock,
+	 * which requires locking of the child after the parent for namespace
+	 * operations.
 	 */
 	if (pip)
-		xfs_ilock(pip, XFS_IOLOCK_EXCL);
+		xfs_ilock(pip, XFS_IOLOCK_EXCL | XFS_IOLOCK_PARENT);
 
 	/*
 	 * A new AG needs to be found for the file.  If the file's parent
diff --git a/fs/xfs/xfs_iget.c b/fs/xfs/xfs_iget.c
index 0cdd26932d8..d7de5a3f786 100644
--- a/fs/xfs/xfs_iget.c
+++ b/fs/xfs/xfs_iget.c
@@ -91,6 +91,17 @@ xfs_inode_alloc(
 	return ip;
 }
 
+STATIC void
+xfs_inode_free_callback(
+	struct rcu_head		*head)
+{
+	struct inode		*inode = container_of(head, struct inode, i_rcu);
+	struct xfs_inode	*ip = XFS_I(inode);
+
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_zone_free(xfs_inode_zone, ip);
+}
+
 void
 xfs_inode_free(
 	struct xfs_inode	*ip)
@@ -134,7 +145,7 @@ xfs_inode_free(
 	ASSERT(!spin_is_locked(&ip->i_flags_lock));
 	ASSERT(completion_done(&ip->i_flush));
 
-	kmem_zone_free(xfs_inode_zone, ip);
+	call_rcu(&ip->i_vnode.i_rcu, xfs_inode_free_callback);
 }
 
 /*
diff --git a/fs/xfs/xfs_inode_item.c b/fs/xfs/xfs_inode_item.c
index c7ac020705d..7c8d30c453c 100644
--- a/fs/xfs/xfs_inode_item.c
+++ b/fs/xfs/xfs_inode_item.c
@@ -657,18 +657,37 @@ xfs_inode_item_unlock(
 }
 
 /*
- * This is called to find out where the oldest active copy of the
- * inode log item in the on disk log resides now that the last log
- * write of it completed at the given lsn.  Since we always re-log
- * all dirty data in an inode, the latest copy in the on disk log
- * is the only one that matters.  Therefore, simply return the
- * given lsn.
+ * This is called to find out where the oldest active copy of the inode log
+ * item in the on disk log resides now that the last log write of it completed
+ * at the given lsn.  Since we always re-log all dirty data in an inode, the
+ * latest copy in the on disk log is the only one that matters.  Therefore,
+ * simply return the given lsn.
+ *
+ * If the inode has been marked stale because the cluster is being freed, we
+ * don't want to (re-)insert this inode into the AIL. There is a race condition
+ * where the cluster buffer may be unpinned before the inode is inserted into
+ * the AIL during transaction committed processing. If the buffer is unpinned
+ * before the inode item has been committed and inserted, then it is possible
+ * for the buffer to be written and IO completions before the inode is inserted
+ * into the AIL. In that case, we'd be inserting a clean, stale inode into the
+ * AIL which will never get removed. It will, however, get reclaimed which
+ * triggers an assert in xfs_inode_free() complaining about freein an inode
+ * still in the AIL.
+ *
+ * To avoid this, return a lower LSN than the one passed in so that the
+ * transaction committed code will not move the inode forward in the AIL but
+ * will still unpin it properly.
  */
 STATIC xfs_lsn_t
 xfs_inode_item_committed(
 	struct xfs_log_item	*lip,
 	xfs_lsn_t		lsn)
 {
+	struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+	struct xfs_inode	*ip = iip->ili_inode;
+
+	if (xfs_iflags_test(ip, XFS_ISTALE))
+		return lsn - 1;
 	return lsn;
 }
 
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index b1498ab5a39..19e9dfa1c25 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -275,6 +275,7 @@ xfs_free_perag(
 		pag = radix_tree_delete(&mp->m_perag_tree, agno);
 		spin_unlock(&mp->m_perag_lock);
 		ASSERT(pag);
+		ASSERT(atomic_read(&pag->pag_ref) == 0);
 		call_rcu(&pag->rcu_head, __xfs_free_perag);
 	}
 }
diff --git a/fs/xfs/xfs_mru_cache.c b/fs/xfs/xfs_mru_cache.c
index 45ce15dc5b2..edfa178bafb 100644
--- a/fs/xfs/xfs_mru_cache.c
+++ b/fs/xfs/xfs_mru_cache.c
@@ -408,7 +408,7 @@ xfs_mru_cache_flush(
 	spin_lock(&mru->lock);
 	if (mru->queued) {
 		spin_unlock(&mru->lock);
-		cancel_rearming_delayed_workqueue(xfs_mru_reap_wq, &mru->work);
+		cancel_delayed_work_sync(&mru->work);
 		spin_lock(&mru->lock);
 	}
 
diff --git a/fs/xfs/xfs_quota.h b/fs/xfs/xfs_quota.h
index e0e64b113bd..9bb6eda4cd2 100644
--- a/fs/xfs/xfs_quota.h
+++ b/fs/xfs/xfs_quota.h
@@ -346,8 +346,17 @@ xfs_qm_vop_dqalloc(struct xfs_inode *ip, uid_t uid, gid_t gid, prid_t prid,
 #define xfs_trans_mod_dquot_byino(tp, ip, fields, delta)
 #define xfs_trans_apply_dquot_deltas(tp)
 #define xfs_trans_unreserve_and_mod_dquots(tp)
-#define xfs_trans_reserve_quota_nblks(tp, ip, nblks, ninos, flags)	(0)
-#define xfs_trans_reserve_quota_bydquots(tp, mp, u, g, nb, ni, fl)	(0)
+static inline int xfs_trans_reserve_quota_nblks(struct xfs_trans *tp,
+		struct xfs_inode *ip, long nblks, long ninos, uint flags)
+{
+	return 0;
+}
+static inline int xfs_trans_reserve_quota_bydquots(struct xfs_trans *tp,
+		struct xfs_mount *mp, struct xfs_dquot *udqp,
+		struct xfs_dquot *gdqp, long nblks, long nions, uint flags)
+{
+	return 0;
+}
 #define xfs_qm_vop_create_dqattach(tp, ip, u, g)
 #define xfs_qm_vop_rename_dqattach(it)					(0)
 #define xfs_qm_vop_chown(tp, ip, old, new)				(NULL)
@@ -357,11 +366,14 @@ xfs_qm_vop_dqalloc(struct xfs_inode *ip, uid_t uid, gid_t gid, prid_t prid,
 #define xfs_qm_dqdetach(ip)
 #define xfs_qm_dqrele(d)
 #define xfs_qm_statvfs(ip, s)
-#define xfs_qm_sync(mp, fl)						(0)
+static inline int xfs_qm_sync(struct xfs_mount *mp, int flags)
+{
+	return 0;
+}
 #define xfs_qm_newmount(mp, a, b)					(0)
 #define xfs_qm_mount_quotas(mp)
 #define xfs_qm_unmount(mp)
-#define xfs_qm_unmount_quotas(mp)					(0)
+#define xfs_qm_unmount_quotas(mp)
 #endif /* CONFIG_XFS_QUOTA */
 
 #define xfs_trans_unreserve_quota_nblks(tp, ip, nblks, ninos, flags) \
diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c
index d2af0a8381a..77a59891734 100644
--- a/fs/xfs/xfs_rename.c
+++ b/fs/xfs/xfs_rename.c
@@ -297,6 +297,7 @@ xfs_rename(
 	 * it and some incremental backup programs won't work without it.
 	 */
 	xfs_trans_ichgtime(tp, src_ip, XFS_ICHGTIME_CHG);
+	xfs_trans_log_inode(tp, src_ip, XFS_ILOG_CORE);
 
 	/*
 	 * Adjust the link count on src_dp.  This is necessary when
diff --git a/include/acpi/video.h b/include/acpi/video.h
index 551793c9b6e..0e98e679d3a 100644
--- a/include/acpi/video.h
+++ b/include/acpi/video.h
@@ -1,6 +1,10 @@
 #ifndef __ACPI_VIDEO_H
 #define __ACPI_VIDEO_H
 
+#include <linux/errno.h> /* for ENODEV */
+
+struct acpi_device;
+
 #define ACPI_VIDEO_DISPLAY_CRT  1
 #define ACPI_VIDEO_DISPLAY_TV   2
 #define ACPI_VIDEO_DISPLAY_DVI  3
@@ -26,4 +30,3 @@ static inline int acpi_video_get_edid(struct acpi_device *device, int type,
 #endif
 
 #endif
-
diff --git a/include/asm-generic/ioctls.h b/include/asm-generic/ioctls.h
index a3216655d65..3f3f2d189fb 100644
--- a/include/asm-generic/ioctls.h
+++ b/include/asm-generic/ioctls.h
@@ -67,6 +67,7 @@
 #endif
 #define TIOCGPTN	_IOR('T', 0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T', 0x31, int)  /* Lock/unlock Pty */
+#define TIOCGDEV	_IOR('T', 0x32, unsigned int) /* Get primary device node of /dev/console */
 #define TCGETX		0x5432 /* SYS5 TCGETX compatibility */
 #define TCSETX		0x5433
 #define TCSETXF		0x5434
diff --git a/include/asm-generic/irq_regs.h b/include/asm-generic/irq_regs.h
index 5ae1d07d4a1..6bf9355fa7e 100644
--- a/include/asm-generic/irq_regs.h
+++ b/include/asm-generic/irq_regs.h
@@ -22,15 +22,15 @@ DECLARE_PER_CPU(struct pt_regs *, __irq_regs);
 
 static inline struct pt_regs *get_irq_regs(void)
 {
-	return __get_cpu_var(__irq_regs);
+	return __this_cpu_read(__irq_regs);
 }
 
 static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs)
 {
-	struct pt_regs *old_regs, **pp_regs = &__get_cpu_var(__irq_regs);
+	struct pt_regs *old_regs;
 
-	old_regs = *pp_regs;
-	*pp_regs = new_regs;
+	old_regs = __this_cpu_read(__irq_regs);
+	__this_cpu_write(__irq_regs, new_regs);
 	return old_regs;
 }
 
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 8c641bed9bb..a2776e2807a 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -287,6 +287,8 @@ typedef struct drm_i915_irq_wait {
 #define I915_PARAM_HAS_EXECBUF2          9
 #define I915_PARAM_HAS_BSD		 10
 #define I915_PARAM_HAS_BLT		 11
+#define I915_PARAM_HAS_RELAXED_FENCING	 12
+#define I915_PARAM_HAS_COHERENT_RINGS	 13
 
 typedef struct drm_i915_getparam {
 	int param;
diff --git a/include/drm/nouveau_drm.h b/include/drm/nouveau_drm.h
index 01a71411950..bc5590b1a1a 100644
--- a/include/drm/nouveau_drm.h
+++ b/include/drm/nouveau_drm.h
@@ -80,6 +80,7 @@ struct drm_nouveau_gpuobj_free {
 #define NOUVEAU_GETPARAM_VM_VRAM_BASE    12
 #define NOUVEAU_GETPARAM_GRAPH_UNITS     13
 #define NOUVEAU_GETPARAM_PTIMER_TIME     14
+#define NOUVEAU_GETPARAM_HAS_BO_USAGE    15
 struct drm_nouveau_getparam {
 	uint64_t param;
 	uint64_t value;
@@ -95,6 +96,12 @@ struct drm_nouveau_setparam {
 #define NOUVEAU_GEM_DOMAIN_GART      (1 << 2)
 #define NOUVEAU_GEM_DOMAIN_MAPPABLE  (1 << 3)
 
+#define NOUVEAU_GEM_TILE_LAYOUT_MASK 0x0000ff00
+#define NOUVEAU_GEM_TILE_16BPP       0x00000001
+#define NOUVEAU_GEM_TILE_32BPP       0x00000002
+#define NOUVEAU_GEM_TILE_ZETA        0x00000004
+#define NOUVEAU_GEM_TILE_NONCONTIG   0x00000008
+
 struct drm_nouveau_gem_info {
 	uint32_t handle;
 	uint32_t domain;
diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h
index 5afa5b52063..beafc156a53 100644
--- a/include/drm/ttm/ttm_bo_api.h
+++ b/include/drm/ttm/ttm_bo_api.h
@@ -432,6 +432,10 @@ extern void ttm_bo_synccpu_write_release(struct ttm_buffer_object *bo);
  * together with the @destroy function,
  * enables driver-specific objects derived from a ttm_buffer_object.
  * On successful return, the object kref and list_kref are set to 1.
+ * If a failure occurs, the function will call the @destroy function, or
+ * kfree() if @destroy is NULL. Thus, after a failure, dereferencing @bo is
+ * illegal and will likely cause memory corruption.
+ *
  * Returns
  * -ENOMEM: Out of memory.
  * -EINVAL: Invalid placement flags.
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index d01b4ddbdc5..8e0c848326b 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -206,14 +206,84 @@ struct ttm_tt {
 struct ttm_mem_type_manager;
 
 struct ttm_mem_type_manager_func {
+	/**
+	 * struct ttm_mem_type_manager member init
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @p_size: Implementation dependent, but typically the size of the
+	 * range to be managed in pages.
+	 *
+	 * Called to initialize a private range manager. The function is
+	 * expected to initialize the man::priv member.
+	 * Returns 0 on success, negative error code on failure.
+	 */
 	int  (*init)(struct ttm_mem_type_manager *man, unsigned long p_size);
+
+	/**
+	 * struct ttm_mem_type_manager member takedown
+	 *
+	 * @man: Pointer to a memory type manager.
+	 *
+	 * Called to undo the setup done in init. All allocated resources
+	 * should be freed.
+	 */
 	int  (*takedown)(struct ttm_mem_type_manager *man);
+
+	/**
+	 * struct ttm_mem_type_manager member get_node
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @bo: Pointer to the buffer object we're allocating space for.
+	 * @placement: Placement details.
+	 * @mem: Pointer to a struct ttm_mem_reg to be filled in.
+	 *
+	 * This function should allocate space in the memory type managed
+	 * by @man. Placement details if
+	 * applicable are given by @placement. If successful,
+	 * @mem::mm_node should be set to a non-null value, and
+	 * @mem::start should be set to a value identifying the beginning
+	 * of the range allocated, and the function should return zero.
+	 * If the memory region accomodate the buffer object, @mem::mm_node
+	 * should be set to NULL, and the function should return 0.
+	 * If a system error occured, preventing the request to be fulfilled,
+	 * the function should return a negative error code.
+	 *
+	 * Note that @mem::mm_node will only be dereferenced by
+	 * struct ttm_mem_type_manager functions and optionally by the driver,
+	 * which has knowledge of the underlying type.
+	 *
+	 * This function may not be called from within atomic context, so
+	 * an implementation can and must use either a mutex or a spinlock to
+	 * protect any data structures managing the space.
+	 */
 	int  (*get_node)(struct ttm_mem_type_manager *man,
 			 struct ttm_buffer_object *bo,
 			 struct ttm_placement *placement,
 			 struct ttm_mem_reg *mem);
+
+	/**
+	 * struct ttm_mem_type_manager member put_node
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @mem: Pointer to a struct ttm_mem_reg to be filled in.
+	 *
+	 * This function frees memory type resources previously allocated
+	 * and that are identified by @mem::mm_node and @mem::start. May not
+	 * be called from within atomic context.
+	 */
 	void (*put_node)(struct ttm_mem_type_manager *man,
 			 struct ttm_mem_reg *mem);
+
+	/**
+	 * struct ttm_mem_type_manager member debug
+	 *
+	 * @man: Pointer to a memory type manager.
+	 * @prefix: Prefix to be used in printout to identify the caller.
+	 *
+	 * This function is called to print out the state of the memory
+	 * type manager to aid debugging of out-of-memory conditions.
+	 * It may not be called from within atomic context.
+	 */
 	void (*debug)(struct ttm_mem_type_manager *man, const char *prefix);
 };
 
@@ -231,14 +301,13 @@ struct ttm_mem_type_manager {
 	uint64_t size;
 	uint32_t available_caching;
 	uint32_t default_caching;
+	const struct ttm_mem_type_manager_func *func;
+	void *priv;
 
 	/*
-	 * Protected by the bdev->lru_lock.
-	 * TODO: Consider one lru_lock per ttm_mem_type_manager.
-	 * Plays ill with list removal, though.
+	 * Protected by the global->lru_lock.
 	 */
-	const struct ttm_mem_type_manager_func *func;
-	void *priv;
+
 	struct list_head lru;
 };
 
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 97319a8fc1e..a354c199ab9 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -367,7 +367,6 @@ header-y += utime.h
 header-y += utsname.h
 header-y += veth.h
 header-y += vhost.h
-header-y += videodev.h
 header-y += videodev2.h
 header-y += virtio_9p.h
 header-y += virtio_balloon.h
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 050a7bccb83..67c91b4418b 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -219,7 +219,7 @@ static inline int acpi_video_display_switch_support(void)
 
 extern int acpi_blacklisted(void);
 extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
-extern int acpi_osi_setup(char *str);
+extern void acpi_osi_setup(char *str);
 
 #ifdef CONFIG_ACPI_NUMA
 int acpi_get_pxm(acpi_handle handle);
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index c6454cca044..9e7f259346e 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -18,6 +18,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/resource.h>
+#include <linux/regulator/consumer.h>
 
 #define AMBA_NR_IRQS	2
 #define AMBA_CID	0xb105f00d
@@ -28,6 +29,7 @@ struct amba_device {
 	struct device		dev;
 	struct resource		res;
 	struct clk		*pclk;
+	struct regulator	*vcore;
 	u64			dma_mask;
 	unsigned int		periphid;
 	unsigned int		irq[AMBA_NR_IRQS];
@@ -71,6 +73,12 @@ void amba_release_regions(struct amba_device *);
 #define amba_pclk_disable(d)	\
 	do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
 
+#define amba_vcore_enable(d)	\
+	(IS_ERR((d)->vcore) ? 0 : regulator_enable((d)->vcore))
+
+#define amba_vcore_disable(d)	\
+	do { if (!IS_ERR((d)->vcore)) regulator_disable((d)->vcore); } while (0)
+
 /* Some drivers don't use the struct amba_device */
 #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
 #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h
index 6021588ba0a..5479fdc849e 100644
--- a/include/linux/amba/serial.h
+++ b/include/linux/amba/serial.h
@@ -113,6 +113,21 @@
 #define UART01x_LCRH_PEN	0x02
 #define UART01x_LCRH_BRK	0x01
 
+#define ST_UART011_DMAWM_RX_1	(0 << 3)
+#define ST_UART011_DMAWM_RX_2	(1 << 3)
+#define ST_UART011_DMAWM_RX_4	(2 << 3)
+#define ST_UART011_DMAWM_RX_8	(3 << 3)
+#define ST_UART011_DMAWM_RX_16	(4 << 3)
+#define ST_UART011_DMAWM_RX_32	(5 << 3)
+#define ST_UART011_DMAWM_RX_48	(6 << 3)
+#define ST_UART011_DMAWM_TX_1	0
+#define ST_UART011_DMAWM_TX_2	1
+#define ST_UART011_DMAWM_TX_4	2
+#define ST_UART011_DMAWM_TX_8	3
+#define ST_UART011_DMAWM_TX_16	4
+#define ST_UART011_DMAWM_TX_32	5
+#define ST_UART011_DMAWM_TX_48	6
+
 #define UART010_IIR_RTIS	0x08
 #define UART010_IIR_TIS		0x04
 #define UART010_IIR_RIS		0x02
@@ -180,6 +195,13 @@ struct amba_device; /* in uncompress this is included but amba/bus.h is not */
 struct amba_pl010_data {
 	void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
 };
+
+struct dma_chan;
+struct amba_pl011_data {
+	bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
+	void *dma_rx_param;
+	void *dma_tx_param;
+};
 #endif
 
 #endif
diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h
index a8e4e832cdb..475f8c42c0e 100644
--- a/include/linux/atmdev.h
+++ b/include/linux/atmdev.h
@@ -427,8 +427,10 @@ extern rwlock_t vcc_sklist_lock;
 
 #define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
 
-struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops,
-    int number,unsigned long *flags); /* number == -1: pick first available */
+struct atm_dev *atm_dev_register(const char *type, struct device *parent,
+				 const struct atmdev_ops *ops,
+				 int number, /* -1 == pick first available */
+				 unsigned long *flags);
 struct atm_dev *atm_dev_lookup(int number);
 void atm_dev_deregister(struct atm_dev *dev);
 
diff --git a/include/linux/atomic.h b/include/linux/atomic.h
new file mode 100644
index 00000000000..96c038e43d6
--- /dev/null
+++ b/include/linux/atomic.h
@@ -0,0 +1,37 @@
+#ifndef _LINUX_ATOMIC_H
+#define _LINUX_ATOMIC_H
+#include <asm/atomic.h>
+
+/**
+ * atomic_inc_not_zero_hint - increment if not null
+ * @v: pointer of type atomic_t
+ * @hint: probable value of the atomic before the increment
+ *
+ * This version of atomic_inc_not_zero() gives a hint of probable
+ * value of the atomic. This helps processor to not read the memory
+ * before doing the atomic read/modify/write cycle, lowering
+ * number of bus transactions on some arches.
+ *
+ * Returns: 0 if increment was not done, 1 otherwise.
+ */
+#ifndef atomic_inc_not_zero_hint
+static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint)
+{
+	int val, c = hint;
+
+	/* sanity test, should be removed by compiler if hint is a constant */
+	if (!hint)
+		return atomic_inc_not_zero(v);
+
+	do {
+		val = atomic_cmpxchg(v, c, c + 1);
+		if (val == c)
+			return 1;
+		c = val;
+	} while (c);
+
+	return 0;
+}
+#endif
+
+#endif /* _LINUX_ATOMIC_H */
diff --git a/include/linux/average.h b/include/linux/average.h
new file mode 100644
index 00000000000..c6028fd742c
--- /dev/null
+++ b/include/linux/average.h
@@ -0,0 +1,30 @@
+#ifndef _LINUX_AVERAGE_H
+#define _LINUX_AVERAGE_H
+
+/* Exponentially weighted moving average (EWMA) */
+
+/* For more documentation see lib/average.c */
+
+struct ewma {
+	unsigned long internal;
+	unsigned long factor;
+	unsigned long weight;
+};
+
+extern void ewma_init(struct ewma *avg, unsigned long factor,
+		      unsigned long weight);
+
+extern struct ewma *ewma_add(struct ewma *avg, unsigned long val);
+
+/**
+ * ewma_read() - Get average value
+ * @avg: Average structure
+ *
+ * Returns the average value held in @avg.
+ */
+static inline unsigned long ewma_read(const struct ewma *avg)
+{
+	return avg->internal >> avg->factor;
+}
+
+#endif /* _LINUX_AVERAGE_H */
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index a065612fc92..64a7114a939 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -29,6 +29,7 @@ struct linux_binprm{
 	char buf[BINPRM_BUF_SIZE];
 #ifdef CONFIG_MMU
 	struct vm_area_struct *vma;
+	unsigned long vma_pages;
 #else
 # define MAX_ARG_PAGES	32
 	struct page *page[MAX_ARG_PAGES];
@@ -59,6 +60,10 @@ struct linux_binprm{
 	unsigned long loader, exec;
 };
 
+extern void acct_arg_size(struct linux_binprm *bprm, unsigned long pages);
+extern struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+					int write);
+
 #define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
 #define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT)
 
diff --git a/include/linux/bio.h b/include/linux/bio.h
index ba679992d39..35dcdb3589b 100644
--- a/include/linux/bio.h
+++ b/include/linux/bio.h
@@ -66,10 +66,6 @@
 #define bio_offset(bio)		bio_iovec((bio))->bv_offset
 #define bio_segments(bio)	((bio)->bi_vcnt - (bio)->bi_idx)
 #define bio_sectors(bio)	((bio)->bi_size >> 9)
-#define bio_empty_barrier(bio) \
-	((bio->bi_rw & REQ_HARDBARRIER) && \
-	 !bio_has_data(bio) && \
-	 !(bio->bi_rw & REQ_DISCARD))
 
 static inline unsigned int bio_cur_bytes(struct bio *bio)
 {
diff --git a/include/linux/bit_spinlock.h b/include/linux/bit_spinlock.h
index 7113a32a86e..e612575a259 100644
--- a/include/linux/bit_spinlock.h
+++ b/include/linux/bit_spinlock.h
@@ -1,6 +1,10 @@
 #ifndef __LINUX_BIT_SPINLOCK_H
 #define __LINUX_BIT_SPINLOCK_H
 
+#include <linux/kernel.h>
+#include <linux/preempt.h>
+#include <asm/atomic.h>
+
 /*
  *  bit-based spin_lock()
  *
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index 827cc95711e..2184c6b97ae 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -109,6 +109,17 @@ static inline __u8 ror8(__u8 word, unsigned int shift)
 	return (word >> shift) | (word << (8 - shift));
 }
 
+/**
+ * sign_extend32 - sign extend a 32-bit value using specified bit as sign-bit
+ * @value: value to sign extend
+ * @index: 0 based bit index (0<=index<32) to sign bit
+ */
+static inline __s32 sign_extend32(__u32 value, int index)
+{
+	__u8 shift = 31 - index;
+	return (__s32)(value << shift) >> shift;
+}
+
 static inline unsigned fls_long(unsigned long l)
 {
 	if (sizeof(l) == 4)
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 0437ab6bb54..46ad5197537 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -122,7 +122,6 @@ enum rq_flag_bits {
 	__REQ_FAILFAST_TRANSPORT, /* no driver retries of transport errors */
 	__REQ_FAILFAST_DRIVER,	/* no driver retries of driver errors */
 
-	__REQ_HARDBARRIER,	/* may not be passed by drive either */
 	__REQ_SYNC,		/* request is sync (sync write or read) */
 	__REQ_META,		/* metadata io request */
 	__REQ_DISCARD,		/* request to discard sectors */
@@ -159,7 +158,6 @@ enum rq_flag_bits {
 #define REQ_FAILFAST_DEV	(1 << __REQ_FAILFAST_DEV)
 #define REQ_FAILFAST_TRANSPORT	(1 << __REQ_FAILFAST_TRANSPORT)
 #define REQ_FAILFAST_DRIVER	(1 << __REQ_FAILFAST_DRIVER)
-#define REQ_HARDBARRIER		(1 << __REQ_HARDBARRIER)
 #define REQ_SYNC		(1 << __REQ_SYNC)
 #define REQ_META		(1 << __REQ_META)
 #define REQ_DISCARD		(1 << __REQ_DISCARD)
@@ -168,8 +166,8 @@ enum rq_flag_bits {
 #define REQ_FAILFAST_MASK \
 	(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
 #define REQ_COMMON_MASK \
-	(REQ_WRITE | REQ_FAILFAST_MASK | REQ_HARDBARRIER | REQ_SYNC | \
-	 REQ_META | REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
+	(REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \
+	 REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
 #define REQ_CLONE_MASK		REQ_COMMON_MASK
 
 #define REQ_UNPLUG		(1 << __REQ_UNPLUG)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 5027a599077..36ab42c9bb9 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -250,7 +250,7 @@ struct queue_limits {
 
 	unsigned char		misaligned;
 	unsigned char		discard_misaligned;
-	unsigned char		no_cluster;
+	unsigned char		cluster;
 	signed char		discard_zeroes_data;
 };
 
@@ -380,7 +380,6 @@ struct request_queue
 #endif
 };
 
-#define QUEUE_FLAG_CLUSTER	0	/* cluster several segments into 1 */
 #define QUEUE_FLAG_QUEUED	1	/* uses generic tag queueing */
 #define QUEUE_FLAG_STOPPED	2	/* queue is stopped */
 #define	QUEUE_FLAG_SYNCFULL	3	/* read queue has been filled */
@@ -403,7 +402,6 @@ struct request_queue
 #define QUEUE_FLAG_SECDISCARD  19	/* supports SECDISCARD */
 
 #define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
-				 (1 << QUEUE_FLAG_CLUSTER) |		\
 				 (1 << QUEUE_FLAG_STACKABLE)	|	\
 				 (1 << QUEUE_FLAG_SAME_COMP)	|	\
 				 (1 << QUEUE_FLAG_ADD_RANDOM))
@@ -510,6 +508,11 @@ static inline void queue_flag_clear(unsigned int flag, struct request_queue *q)
 
 #define rq_data_dir(rq)		((rq)->cmd_flags & 1)
 
+static inline unsigned int blk_queue_cluster(struct request_queue *q)
+{
+	return q->limits.cluster;
+}
+
 /*
  * We regard a request as sync, if either a read or a sync write
  */
@@ -552,8 +555,7 @@ static inline void blk_clear_queue_full(struct request_queue *q, int sync)
  * it already be started by driver.
  */
 #define RQ_NOMERGE_FLAGS	\
-	(REQ_NOMERGE | REQ_STARTED | REQ_HARDBARRIER | REQ_SOFTBARRIER | \
-	 REQ_FLUSH | REQ_FUA)
+	(REQ_NOMERGE | REQ_STARTED | REQ_SOFTBARRIER | REQ_FLUSH | REQ_FUA)
 #define rq_mergeable(rq)	\
 	(!((rq)->cmd_flags & RQ_NOMERGE_FLAGS) && \
 	 (((rq)->cmd_flags & REQ_DISCARD) || \
@@ -806,6 +808,7 @@ extern struct request_queue *blk_init_allocated_queue(struct request_queue *,
 extern void blk_cleanup_queue(struct request_queue *);
 extern void blk_queue_make_request(struct request_queue *, make_request_fn *);
 extern void blk_queue_bounce_limit(struct request_queue *, u64);
+extern void blk_limits_max_hw_sectors(struct queue_limits *, unsigned int);
 extern void blk_queue_max_hw_sectors(struct request_queue *, unsigned int);
 extern void blk_queue_max_segments(struct request_queue *, unsigned short);
 extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
index 266ab929123..499dfe982a0 100644
--- a/include/linux/bootmem.h
+++ b/include/linux/bootmem.h
@@ -105,6 +105,8 @@ extern void *__alloc_bootmem_low_node(pg_data_t *pgdat,
 
 #define alloc_bootmem(x) \
 	__alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_align(x, align) \
+	__alloc_bootmem(x, align, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_nopanic(x) \
 	__alloc_bootmem_nopanic(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
 #define alloc_bootmem_pages(x) \
diff --git a/include/linux/ceph/libceph.h b/include/linux/ceph/libceph.h
index f22b2e94168..72c72bfccb8 100644
--- a/include/linux/ceph/libceph.h
+++ b/include/linux/ceph/libceph.h
@@ -227,9 +227,10 @@ extern int ceph_open_session(struct ceph_client *client);
 extern void ceph_release_page_vector(struct page **pages, int num_pages);
 
 extern struct page **ceph_get_direct_page_vector(const char __user *data,
-					    int num_pages,
-					    loff_t off, size_t len);
-extern void ceph_put_page_vector(struct page **pages, int num_pages);
+						 int num_pages,
+						 bool write_page);
+extern void ceph_put_page_vector(struct page **pages, int num_pages,
+				 bool dirty);
 extern void ceph_release_page_vector(struct page **pages, int num_pages);
 extern struct page **ceph_alloc_page_vector(int num_pages, gfp_t flags);
 extern int ceph_copy_user_to_page_vector(struct page **pages,
diff --git a/include/linux/ceph/messenger.h b/include/linux/ceph/messenger.h
index 5956d62c305..a108b425fee 100644
--- a/include/linux/ceph/messenger.h
+++ b/include/linux/ceph/messenger.h
@@ -82,6 +82,7 @@ struct ceph_msg {
 	struct ceph_buffer *middle;
 	struct page **pages;            /* data payload.  NOT OWNER. */
 	unsigned nr_pages;              /* size of page array */
+	unsigned page_alignment;        /* io offset in first page */
 	struct ceph_pagelist *pagelist; /* instead of pages */
 	struct list_head list_head;
 	struct kref kref;
diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h
index 6c91fb032c3..a1af29648fb 100644
--- a/include/linux/ceph/osd_client.h
+++ b/include/linux/ceph/osd_client.h
@@ -79,6 +79,7 @@ struct ceph_osd_request {
 	struct ceph_file_layout r_file_layout;
 	struct ceph_snap_context *r_snapc;    /* snap context for writes */
 	unsigned          r_num_pages;        /* size of page array (follows) */
+	unsigned          r_page_alignment;   /* io offset in first page */
 	struct page     **r_pages;            /* pages for data payload */
 	int               r_pages_from_pool;
 	int               r_own_pages;        /* if true, i own page list */
@@ -194,7 +195,8 @@ extern struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *,
 				      int do_sync, u32 truncate_seq,
 				      u64 truncate_size,
 				      struct timespec *mtime,
-				      bool use_mempool, int num_reply);
+				      bool use_mempool, int num_reply,
+				      int page_align);
 
 static inline void ceph_osdc_get_request(struct ceph_osd_request *req)
 {
@@ -218,7 +220,8 @@ extern int ceph_osdc_readpages(struct ceph_osd_client *osdc,
 			       struct ceph_file_layout *layout,
 			       u64 off, u64 *plen,
 			       u32 truncate_seq, u64 truncate_size,
-			       struct page **pages, int nr_pages);
+			       struct page **pages, int nr_pages,
+			       int page_align);
 
 extern int ceph_osdc_writepages(struct ceph_osd_client *osdc,
 				struct ceph_vino vino,
diff --git a/include/linux/clkdev.h b/include/linux/clkdev.h
new file mode 100644
index 00000000000..457bcb0a310
--- /dev/null
+++ b/include/linux/clkdev.h
@@ -0,0 +1,36 @@
+/*
+ *  include/linux/clkdev.h
+ *
+ *  Copyright (C) 2008 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Helper for the clk API to assist looking up a struct clk.
+ */
+#ifndef __CLKDEV_H
+#define __CLKDEV_H
+
+#include <asm/clkdev.h>
+
+struct clk;
+struct device;
+
+struct clk_lookup {
+	struct list_head	node;
+	const char		*dev_id;
+	const char		*con_id;
+	struct clk		*clk;
+};
+
+struct clk_lookup *clkdev_alloc(struct clk *clk, const char *con_id,
+	const char *dev_fmt, ...);
+
+void clkdev_add(struct clk_lookup *cl);
+void clkdev_drop(struct clk_lookup *cl);
+
+void clkdev_add_table(struct clk_lookup *, size_t);
+int clk_add_alias(const char *, const char *, char *, struct device *);
+
+#endif
diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h
index 7605fdd1eb6..e3d8bf26e5e 100644
--- a/include/linux/cnt32_to_63.h
+++ b/include/linux/cnt32_to_63.h
@@ -61,13 +61,31 @@ union cnt32_to_63 {
  *
  * 2) this code must not be preempted for a duration longer than the
  *    32-bit counter half period minus the longest period between two
- *    calls to this code.
+ *    calls to this code;
  *
  * Those requirements ensure proper update to the state bit in memory.
  * This is usually not a problem in practice, but if it is then a kernel
  * timer should be scheduled to manage for this code to be executed often
  * enough.
  *
+ * And finally:
+ *
+ * 3) the cnt_lo argument must be seen as a globally incrementing value,
+ *    meaning that it should be a direct reference to the counter data which
+ *    can be evaluated according to a specific ordering within the macro,
+ *    and not the result of a previous evaluation stored in a variable.
+ *
+ * For example, this is wrong:
+ *
+ *	u32 partial = get_hw_count();
+ *	u64 full = cnt32_to_63(partial);
+ *	return full;
+ *
+ * This is fine:
+ *
+ *	u64 full = cnt32_to_63(get_hw_count());
+ *	return full;
+ *
  * Note that the top bit (bit 63) in the returned value should be considered
  * as garbage.  It is not cleared here because callers are likely to use a
  * multiplier on the returned value which can get rid of the top bit
diff --git a/include/linux/coda_linux.h b/include/linux/coda_linux.h
index 2e914d0771b..4ccc59c1ea8 100644
--- a/include/linux/coda_linux.h
+++ b/include/linux/coda_linux.h
@@ -37,7 +37,7 @@ extern const struct file_operations coda_ioctl_operations;
 /* operations shared over more than one file */
 int coda_open(struct inode *i, struct file *f);
 int coda_release(struct inode *i, struct file *f);
-int coda_permission(struct inode *inode, int mask);
+int coda_permission(struct inode *inode, int mask, unsigned int flags);
 int coda_revalidate_inode(struct dentry *);
 int coda_getattr(struct vfsmount *, struct dentry *, struct kstat *);
 int coda_setattr(struct dentry *, struct iattr *);
diff --git a/include/linux/completion.h b/include/linux/completion.h
index 36d57f74cd0..51494e6b554 100644
--- a/include/linux/completion.h
+++ b/include/linux/completion.h
@@ -81,10 +81,10 @@ extern int wait_for_completion_interruptible(struct completion *x);
 extern int wait_for_completion_killable(struct completion *x);
 extern unsigned long wait_for_completion_timeout(struct completion *x,
 						   unsigned long timeout);
-extern unsigned long wait_for_completion_interruptible_timeout(
-			struct completion *x, unsigned long timeout);
-extern unsigned long wait_for_completion_killable_timeout(
-			struct completion *x, unsigned long timeout);
+extern long wait_for_completion_interruptible_timeout(
+	struct completion *x, unsigned long timeout);
+extern long wait_for_completion_killable_timeout(
+	struct completion *x, unsigned long timeout);
 extern bool try_wait_for_completion(struct completion *x);
 extern bool completion_done(struct completion *x);
 
diff --git a/include/linux/console.h b/include/linux/console.h
index 95cf6f08a59..9774fe6a1a9 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -126,6 +126,12 @@ struct console {
 	struct	 console *next;
 };
 
+/*
+ * for_each_console() allows you to iterate on each console
+ */
+#define for_each_console(con) \
+	for (con = console_drivers; con != NULL; con = con->next)
+
 extern int console_set_on_cmdline;
 
 extern int add_preferred_console(char *name, int idx, char *options);
@@ -145,7 +151,7 @@ extern int is_console_locked(void);
 extern int braille_register_console(struct console *, int index,
 		char *console_options, char *braille_options);
 extern int braille_unregister_console(struct console *);
-
+extern void console_sysfs_notify(void);
 extern int console_suspend_enabled;
 
 /* Suspend and resume console messages over PM events */
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 4823af64e9d..5f09323ee88 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -10,11 +10,6 @@
  *
  * CPUs are exported via sysfs in the class/cpu/devices/
  * directory. 
- *
- * Per-cpu interfaces can be implemented using a struct device_interface. 
- * See the following for how to do this: 
- * - drivers/base/intf.c 
- * - Documentation/driver-model/interface.txt
  */
 #ifndef _LINUX_CPU_H_
 #define _LINUX_CPU_H_
diff --git a/include/linux/crash_dump.h b/include/linux/crash_dump.h
index 0026f267da2..088cd4ace4e 100644
--- a/include/linux/crash_dump.h
+++ b/include/linux/crash_dump.h
@@ -20,7 +20,14 @@ extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
 #define vmcore_elf_check_arch_cross(x) 0
 #endif
 
-#define vmcore_elf_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
+/*
+ * Architecture code can redefine this if there are any special checks
+ * needed for 64-bit ELF vmcores. In case of 32-bit only architecture,
+ * this can be set to zero.
+ */
+#ifndef vmcore_elf64_check_arch
+#define vmcore_elf64_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
+#endif
 
 /*
  * is_kdump_kernel() checks whether this kernel is booting after a panic of
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 6a4aea30aa0..bd07758943e 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -4,7 +4,9 @@
 #include <asm/atomic.h>
 #include <linux/list.h>
 #include <linux/rculist.h>
+#include <linux/rculist_bl.h>
 #include <linux/spinlock.h>
+#include <linux/seqlock.h>
 #include <linux/cache.h>
 #include <linux/rcupdate.h>
 
@@ -45,6 +47,27 @@ struct dentry_stat_t {
 };
 extern struct dentry_stat_t dentry_stat;
 
+/*
+ * Compare 2 name strings, return 0 if they match, otherwise non-zero.
+ * The strings are both count bytes long, and count is non-zero.
+ */
+static inline int dentry_cmp(const unsigned char *cs, size_t scount,
+				const unsigned char *ct, size_t tcount)
+{
+	int ret;
+	if (scount != tcount)
+		return 1;
+	do {
+		ret = (*cs != *ct);
+		if (ret)
+			break;
+		cs++;
+		ct++;
+		tcount--;
+	} while (tcount);
+	return ret;
+}
+
 /* Name hashing routines. Initial hash value */
 /* Hash courtesy of the R5 hash in reiserfs modulo sign bits */
 #define init_name_hash()		0
@@ -81,25 +104,33 @@ full_name_hash(const unsigned char *name, unsigned int len)
  * large memory footprint increase).
  */
 #ifdef CONFIG_64BIT
-#define DNAME_INLINE_LEN_MIN 32 /* 192 bytes */
+# define DNAME_INLINE_LEN 32 /* 192 bytes */
 #else
-#define DNAME_INLINE_LEN_MIN 40 /* 128 bytes */
+# ifdef CONFIG_SMP
+#  define DNAME_INLINE_LEN 36 /* 128 bytes */
+# else
+#  define DNAME_INLINE_LEN 40 /* 128 bytes */
+# endif
 #endif
 
 struct dentry {
-	atomic_t d_count;
+	/* RCU lookup touched fields */
 	unsigned int d_flags;		/* protected by d_lock */
-	spinlock_t d_lock;		/* per dentry lock */
-	int d_mounted;
-	struct inode *d_inode;		/* Where the name belongs to - NULL is
-					 * negative */
-	/*
-	 * The next three fields are touched by __d_lookup.  Place them here
-	 * so they all fit in a cache line.
-	 */
-	struct hlist_node d_hash;	/* lookup hash list */
+	seqcount_t d_seq;		/* per dentry seqlock */
+	struct hlist_bl_node d_hash;	/* lookup hash list */
 	struct dentry *d_parent;	/* parent directory */
 	struct qstr d_name;
+	struct inode *d_inode;		/* Where the name belongs to - NULL is
+					 * negative */
+	unsigned char d_iname[DNAME_INLINE_LEN];	/* small names */
+
+	/* Ref lookup also touches following */
+	unsigned int d_count;		/* protected by d_lock */
+	spinlock_t d_lock;		/* per dentry lock */
+	const struct dentry_operations *d_op;
+	struct super_block *d_sb;	/* The root of the dentry tree */
+	unsigned long d_time;		/* used by d_revalidate */
+	void *d_fsdata;			/* fs-specific data */
 
 	struct list_head d_lru;		/* LRU list */
 	/*
@@ -111,12 +142,6 @@ struct dentry {
 	} d_u;
 	struct list_head d_subdirs;	/* our children */
 	struct list_head d_alias;	/* inode alias list */
-	unsigned long d_time;		/* used by d_revalidate */
-	const struct dentry_operations *d_op;
-	struct super_block *d_sb;	/* The root of the dentry tree */
-	void *d_fsdata;			/* fs-specific data */
-
-	unsigned char d_iname[DNAME_INLINE_LEN_MIN];	/* small names */
 };
 
 /*
@@ -133,96 +158,61 @@ enum dentry_d_lock_class
 
 struct dentry_operations {
 	int (*d_revalidate)(struct dentry *, struct nameidata *);
-	int (*d_hash) (struct dentry *, struct qstr *);
-	int (*d_compare) (struct dentry *, struct qstr *, struct qstr *);
-	int (*d_delete)(struct dentry *);
+	int (*d_hash)(const struct dentry *, const struct inode *,
+			struct qstr *);
+	int (*d_compare)(const struct dentry *, const struct inode *,
+			const struct dentry *, const struct inode *,
+			unsigned int, const char *, const struct qstr *);
+	int (*d_delete)(const struct dentry *);
 	void (*d_release)(struct dentry *);
 	void (*d_iput)(struct dentry *, struct inode *);
 	char *(*d_dname)(struct dentry *, char *, int);
-};
-
-/* the dentry parameter passed to d_hash and d_compare is the parent
- * directory of the entries to be compared. It is used in case these
- * functions need any directory specific information for determining
- * equivalency classes.  Using the dentry itself might not work, as it
- * might be a negative dentry which has no information associated with
- * it */
+} ____cacheline_aligned;
 
 /*
-locking rules:
-		big lock	dcache_lock	d_lock   may block
-d_revalidate:	no		no		no       yes
-d_hash		no		no		no       yes
-d_compare:	no		yes		yes      no
-d_delete:	no		yes		no       no
-d_release:	no		no		no       yes
-d_iput:		no		no		no       yes
+ * Locking rules for dentry_operations callbacks are to be found in
+ * Documentation/filesystems/Locking. Keep it updated!
+ *
+ * FUrther descriptions are found in Documentation/filesystems/vfs.txt.
+ * Keep it updated too!
  */
 
 /* d_flags entries */
 #define DCACHE_AUTOFS_PENDING 0x0001    /* autofs: "under construction" */
-#define DCACHE_NFSFS_RENAMED  0x0002    /* this dentry has been "silly
-					 * renamed" and has to be
-					 * deleted on the last dput()
-					 */
-#define	DCACHE_DISCONNECTED 0x0004
-     /* This dentry is possibly not currently connected to the dcache tree,
-      * in which case its parent will either be itself, or will have this
-      * flag as well.  nfsd will not use a dentry with this bit set, but will
-      * first endeavour to clear the bit either by discovering that it is
-      * connected, or by performing lookup operations.   Any filesystem which
-      * supports nfsd_operations MUST have a lookup function which, if it finds
-      * a directory inode with a DCACHE_DISCONNECTED dentry, will d_move
-      * that dentry into place and return that dentry rather than the passed one,
-      * typically using d_splice_alias.
-      */
+#define DCACHE_NFSFS_RENAMED  0x0002
+     /* this dentry has been "silly renamed" and has to be deleted on the last
+      * dput() */
+
+#define	DCACHE_DISCONNECTED	0x0004
+     /* This dentry is possibly not currently connected to the dcache tree, in
+      * which case its parent will either be itself, or will have this flag as
+      * well.  nfsd will not use a dentry with this bit set, but will first
+      * endeavour to clear the bit either by discovering that it is connected,
+      * or by performing lookup operations.   Any filesystem which supports
+      * nfsd_operations MUST have a lookup function which, if it finds a
+      * directory inode with a DCACHE_DISCONNECTED dentry, will d_move that
+      * dentry into place and return that dentry rather than the passed one,
+      * typically using d_splice_alias. */
 
 #define DCACHE_REFERENCED	0x0008  /* Recently used, don't discard. */
 #define DCACHE_UNHASHED		0x0010	
-
-#define DCACHE_INOTIFY_PARENT_WATCHED	0x0020 /* Parent inode is watched by inotify */
+#define DCACHE_INOTIFY_PARENT_WATCHED 0x0020
+     /* Parent inode is watched by inotify */
 
 #define DCACHE_COOKIE		0x0040	/* For use by dcookie subsystem */
-
-#define DCACHE_FSNOTIFY_PARENT_WATCHED	0x0080 /* Parent inode is watched by some fsnotify listener */
+#define DCACHE_FSNOTIFY_PARENT_WATCHED 0x0080
+     /* Parent inode is watched by some fsnotify listener */
 
 #define DCACHE_CANT_MOUNT	0x0100
+#define DCACHE_GENOCIDE		0x0200
+#define DCACHE_MOUNTED		0x0400	/* is a mountpoint */
 
-extern spinlock_t dcache_lock;
-extern seqlock_t rename_lock;
-
-/**
- * d_drop - drop a dentry
- * @dentry: dentry to drop
- *
- * d_drop() unhashes the entry from the parent dentry hashes, so that it won't
- * be found through a VFS lookup any more. Note that this is different from
- * deleting the dentry - d_delete will try to mark the dentry negative if
- * possible, giving a successful _negative_ lookup, while d_drop will
- * just make the cache lookup fail.
- *
- * d_drop() is used mainly for stuff that wants to invalidate a dentry for some
- * reason (NFS timeouts or autofs deletes).
- *
- * __d_drop requires dentry->d_lock.
- */
-
-static inline void __d_drop(struct dentry *dentry)
-{
-	if (!(dentry->d_flags & DCACHE_UNHASHED)) {
-		dentry->d_flags |= DCACHE_UNHASHED;
-		hlist_del_rcu(&dentry->d_hash);
-	}
-}
+#define DCACHE_OP_HASH		0x1000
+#define DCACHE_OP_COMPARE	0x2000
+#define DCACHE_OP_REVALIDATE	0x4000
+#define DCACHE_OP_DELETE	0x8000
 
-static inline void d_drop(struct dentry *dentry)
-{
-	spin_lock(&dcache_lock);
-	spin_lock(&dentry->d_lock);
- 	__d_drop(dentry);
-	spin_unlock(&dentry->d_lock);
-	spin_unlock(&dcache_lock);
-}
+extern seqlock_t rename_lock;
 
 static inline int dname_external(struct dentry *dentry)
 {
@@ -235,10 +225,14 @@ static inline int dname_external(struct dentry *dentry)
 extern void d_instantiate(struct dentry *, struct inode *);
 extern struct dentry * d_instantiate_unique(struct dentry *, struct inode *);
 extern struct dentry * d_materialise_unique(struct dentry *, struct inode *);
+extern void __d_drop(struct dentry *dentry);
+extern void d_drop(struct dentry *dentry);
 extern void d_delete(struct dentry *);
+extern void d_set_d_op(struct dentry *dentry, const struct dentry_operations *op);
 
 /* allocate/de-allocate */
 extern struct dentry * d_alloc(struct dentry *, const struct qstr *);
+extern struct dentry * d_alloc_pseudo(struct super_block *, const struct qstr *);
 extern struct dentry * d_splice_alias(struct inode *, struct dentry *);
 extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *);
 extern struct dentry * d_obtain_alias(struct inode *);
@@ -296,14 +290,40 @@ static inline struct dentry *d_add_unique(struct dentry *entry, struct inode *in
 	return res;
 }
 
+extern void dentry_update_name_case(struct dentry *, struct qstr *);
+
 /* used for rename() and baskets */
 extern void d_move(struct dentry *, struct dentry *);
 extern struct dentry *d_ancestor(struct dentry *, struct dentry *);
 
 /* appendix may either be NULL or be used for transname suffixes */
-extern struct dentry * d_lookup(struct dentry *, struct qstr *);
-extern struct dentry * __d_lookup(struct dentry *, struct qstr *);
-extern struct dentry * d_hash_and_lookup(struct dentry *, struct qstr *);
+extern struct dentry *d_lookup(struct dentry *, struct qstr *);
+extern struct dentry *d_hash_and_lookup(struct dentry *, struct qstr *);
+extern struct dentry *__d_lookup(struct dentry *, struct qstr *);
+extern struct dentry *__d_lookup_rcu(struct dentry *parent, struct qstr *name,
+				unsigned *seq, struct inode **inode);
+
+/**
+ * __d_rcu_to_refcount - take a refcount on dentry if sequence check is ok
+ * @dentry: dentry to take a ref on
+ * @seq: seqcount to verify against
+ * @Returns: 0 on failure, else 1.
+ *
+ * __d_rcu_to_refcount operates on a dentry,seq pair that was returned
+ * by __d_lookup_rcu, to get a reference on an rcu-walk dentry.
+ */
+static inline int __d_rcu_to_refcount(struct dentry *dentry, unsigned seq)
+{
+	int ret = 0;
+
+	assert_spin_locked(&dentry->d_lock);
+	if (!read_seqcount_retry(&dentry->d_seq, seq)) {
+		ret = 1;
+		dentry->d_count++;
+	}
+
+	return ret;
+}
 
 /* validate "insecure" dentry pointer */
 extern int d_validate(struct dentry *, struct dentry *);
@@ -316,34 +336,37 @@ extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...);
 extern char *__d_path(const struct path *path, struct path *root, char *, int);
 extern char *d_path(const struct path *, char *, int);
 extern char *d_path_with_unreachable(const struct path *, char *, int);
-extern char *__dentry_path(struct dentry *, char *, int);
+extern char *dentry_path_raw(struct dentry *, char *, int);
 extern char *dentry_path(struct dentry *, char *, int);
 
 /* Allocation counts.. */
 
 /**
- *	dget, dget_locked	-	get a reference to a dentry
+ *	dget, dget_dlock -	get a reference to a dentry
  *	@dentry: dentry to get a reference to
  *
  *	Given a dentry or %NULL pointer increment the reference count
  *	if appropriate and return the dentry. A dentry will not be 
- *	destroyed when it has references. dget() should never be
- *	called for dentries with zero reference counter. For these cases
- *	(preferably none, functions in dcache.c are sufficient for normal
- *	needs and they take necessary precautions) you should hold dcache_lock
- *	and call dget_locked() instead of dget().
+ *	destroyed when it has references.
  */
- 
+static inline struct dentry *dget_dlock(struct dentry *dentry)
+{
+	if (dentry)
+		dentry->d_count++;
+	return dentry;
+}
+
 static inline struct dentry *dget(struct dentry *dentry)
 {
 	if (dentry) {
-		BUG_ON(!atomic_read(&dentry->d_count));
-		atomic_inc(&dentry->d_count);
+		spin_lock(&dentry->d_lock);
+		dget_dlock(dentry);
+		spin_unlock(&dentry->d_lock);
 	}
 	return dentry;
 }
 
-extern struct dentry * dget_locked(struct dentry *);
+extern struct dentry *dget_parent(struct dentry *dentry);
 
 /**
  *	d_unhashed -	is dentry hashed
@@ -374,21 +397,11 @@ static inline void dont_mount(struct dentry *dentry)
 	spin_unlock(&dentry->d_lock);
 }
 
-static inline struct dentry *dget_parent(struct dentry *dentry)
-{
-	struct dentry *ret;
-
-	spin_lock(&dentry->d_lock);
-	ret = dget(dentry->d_parent);
-	spin_unlock(&dentry->d_lock);
-	return ret;
-}
-
 extern void dput(struct dentry *);
 
 static inline int d_mountpoint(struct dentry *dentry)
 {
-	return dentry->d_mounted;
+	return dentry->d_flags & DCACHE_MOUNTED;
 }
 
 extern struct vfsmount *lookup_mnt(struct path *);
diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
index 8723491f7df..68cd248f6d3 100644
--- a/include/linux/dcbnl.h
+++ b/include/linux/dcbnl.h
@@ -22,6 +22,89 @@
 
 #include <linux/types.h>
 
+/* IEEE 802.1Qaz std supported values */
+#define IEEE_8021QAZ_MAX_TCS	8
+
+/* This structure contains the IEEE 802.1Qaz ETS managed object
+ *
+ * @willing: willing bit in ETS configuratin TLV
+ * @ets_cap: indicates supported capacity of ets feature
+ * @cbs: credit based shaper ets algorithm supported
+ * @tc_tx_bw: tc tx bandwidth indexed by traffic class
+ * @tc_rx_bw: tc rx bandwidth indexed by traffic class
+ * @tc_tsa: TSA Assignment table, indexed by traffic class
+ * @prio_tc: priority assignment table mapping 8021Qp to traffic class
+ * @tc_reco_bw: recommended tc bandwidth indexed by traffic class for TLV
+ * @tc_reco_tsa: recommended tc bandwidth indexed by traffic class for TLV
+ * @reco_prio_tc: recommended tc tx bandwidth indexed by traffic class for TLV
+ *
+ * Recommended values are used to set fields in the ETS recommendation TLV
+ * with hardware offloaded LLDP.
+ *
+ * ----
+ *  TSA Assignment 8 bit identifiers
+ *	0	strict priority
+ *	1	credit-based shaper
+ *	2	enhanced transmission selection
+ *	3-254	reserved
+ *	255	vendor specific
+ */
+struct ieee_ets {
+	__u8	willing;
+	__u8	ets_cap;
+	__u8	cbs;
+	__u8	tc_tx_bw[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_rx_bw[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_tsa[IEEE_8021QAZ_MAX_TCS];
+	__u8	prio_tc[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_reco_bw[IEEE_8021QAZ_MAX_TCS];
+	__u8	tc_reco_tsa[IEEE_8021QAZ_MAX_TCS];
+	__u8	reco_prio_tc[IEEE_8021QAZ_MAX_TCS];
+};
+
+/* This structure contains the IEEE 802.1Qaz PFC managed object
+ *
+ * @pfc_cap: Indicates the number of traffic classes on the local device
+ *	     that may simultaneously have PFC enabled.
+ * @pfc_en: bitmap indicating pfc enabled traffic classes
+ * @mbc: enable macsec bypass capability
+ * @delay: the allowance made for a round-trip propagation delay of the
+ *	   link in bits.
+ * @requests: count of the sent pfc frames
+ * @indications: count of the received pfc frames
+ */
+struct ieee_pfc {
+	__u8	pfc_cap;
+	__u8	pfc_en;
+	__u8	mbc;
+	__u16	delay;
+	__u64	requests[IEEE_8021QAZ_MAX_TCS];
+	__u64	indications[IEEE_8021QAZ_MAX_TCS];
+};
+
+/* This structure contains the IEEE 802.1Qaz APP managed object. This
+ * object is also used for the CEE std as well. There is no difference
+ * between the objects.
+ *
+ * @selector: protocol identifier type
+ * @protocol: protocol of type indicated
+ * @priority: 3-bit unsigned integer indicating priority
+ *
+ * ----
+ *  Selector field values
+ *	0	Reserved
+ *	1	Ethertype
+ *	2	Well known port number over TCP or SCTP
+ *	3	Well known port number over UDP or DCCP
+ *	4	Well known port number over TCP, SCTP, UDP, or DCCP
+ *	5-7	Reserved
+ */
+struct dcb_app {
+	__u8	selector;
+	__u32	protocol;
+	__u8	priority;
+};
+
 struct dcbmsg {
 	__u8               dcb_family;
 	__u8               cmd;
@@ -50,6 +133,12 @@ struct dcbmsg {
  * @DCB_CMD_SBCN: get backward congestion notification configration.
  * @DCB_CMD_GAPP: get application protocol configuration
  * @DCB_CMD_SAPP: set application protocol configuration
+ * @DCB_CMD_IEEE_SET: set IEEE 802.1Qaz configuration
+ * @DCB_CMD_IEEE_GET: get IEEE 802.1Qaz configuration
+ * @DCB_CMD_GDCBX: get DCBX engine configuration
+ * @DCB_CMD_SDCBX: set DCBX engine configuration
+ * @DCB_CMD_GFEATCFG: get DCBX features flags
+ * @DCB_CMD_SFEATCFG: set DCBX features negotiation flags
  */
 enum dcbnl_commands {
 	DCB_CMD_UNDEFINED,
@@ -83,6 +172,15 @@ enum dcbnl_commands {
 	DCB_CMD_GAPP,
 	DCB_CMD_SAPP,
 
+	DCB_CMD_IEEE_SET,
+	DCB_CMD_IEEE_GET,
+
+	DCB_CMD_GDCBX,
+	DCB_CMD_SDCBX,
+
+	DCB_CMD_GFEATCFG,
+	DCB_CMD_SFEATCFG,
+
 	__DCB_CMD_ENUM_MAX,
 	DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1,
 };
@@ -102,6 +200,9 @@ enum dcbnl_commands {
  * @DCB_ATTR_CAP: DCB capabilities of the device (NLA_NESTED)
  * @DCB_ATTR_NUMTCS: number of traffic classes supported (NLA_NESTED)
  * @DCB_ATTR_BCN: backward congestion notification configuration (NLA_NESTED)
+ * @DCB_ATTR_IEEE: IEEE 802.1Qaz supported attributes (NLA_NESTED)
+ * @DCB_ATTR_DCBX: DCBX engine configuration in the device (NLA_U8)
+ * @DCB_ATTR_FEATCFG: DCBX features flags (NLA_NESTED)
  */
 enum dcbnl_attrs {
 	DCB_ATTR_UNDEFINED,
@@ -119,10 +220,32 @@ enum dcbnl_attrs {
 	DCB_ATTR_BCN,
 	DCB_ATTR_APP,
 
+	/* IEEE std attributes */
+	DCB_ATTR_IEEE,
+
+	DCB_ATTR_DCBX,
+	DCB_ATTR_FEATCFG,
+
 	__DCB_ATTR_ENUM_MAX,
 	DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1,
 };
 
+enum ieee_attrs {
+	DCB_ATTR_IEEE_UNSPEC,
+	DCB_ATTR_IEEE_ETS,
+	DCB_ATTR_IEEE_PFC,
+	DCB_ATTR_IEEE_APP_TABLE,
+	__DCB_ATTR_IEEE_MAX
+};
+#define DCB_ATTR_IEEE_MAX (__DCB_ATTR_IEEE_MAX - 1)
+
+enum ieee_attrs_app {
+	DCB_ATTR_IEEE_APP_UNSPEC,
+	DCB_ATTR_IEEE_APP,
+	__DCB_ATTR_IEEE_APP_MAX
+};
+#define DCB_ATTR_IEEE_APP_MAX (__DCB_ATTR_IEEE_APP_MAX - 1)
+
 /**
  * enum dcbnl_pfc_attrs - DCB Priority Flow Control user priority nested attrs
  *
@@ -262,6 +385,8 @@ enum dcbnl_tc_attrs {
  * @DCB_CAP_ATTR_GSP: (NLA_U8) device supports group strict priority
  * @DCB_CAP_ATTR_BCN: (NLA_U8) device supports Backwards Congestion
  *                             Notification
+ * @DCB_CAP_ATTR_DCBX: (NLA_U8) device supports DCBX engine
+ *
  */
 enum dcbnl_cap_attrs {
 	DCB_CAP_ATTR_UNDEFINED,
@@ -273,12 +398,45 @@ enum dcbnl_cap_attrs {
 	DCB_CAP_ATTR_PFC_TCS,
 	DCB_CAP_ATTR_GSP,
 	DCB_CAP_ATTR_BCN,
+	DCB_CAP_ATTR_DCBX,
 
 	__DCB_CAP_ATTR_ENUM_MAX,
 	DCB_CAP_ATTR_MAX = __DCB_CAP_ATTR_ENUM_MAX - 1,
 };
 
 /**
+ * DCBX capability flags
+ *
+ * @DCB_CAP_DCBX_HOST: DCBX negotiation is performed by the host LLDP agent.
+ *                     'set' routines are used to configure the device with
+ *                     the negotiated parameters
+ *
+ * @DCB_CAP_DCBX_LLD_MANAGED: DCBX negotiation is not performed in the host but
+ *                            by another entity
+ *                            'get' routines are used to retrieve the
+ *                            negotiated parameters
+ *                            'set' routines can be used to set the initial
+ *                            negotiation configuration
+ *
+ * @DCB_CAP_DCBX_VER_CEE: for a non-host DCBX engine, indicates the engine
+ *                        supports the CEE protocol flavor
+ *
+ * @DCB_CAP_DCBX_VER_IEEE: for a non-host DCBX engine, indicates the engine
+ *                         supports the IEEE protocol flavor
+ *
+ * @DCB_CAP_DCBX_STATIC: for a non-host DCBX engine, indicates the engine
+ *                       supports static configuration (i.e no actual
+ *                       negotiation is performed negotiated parameters equal
+ *                       the initial configuration)
+ *
+ */
+#define DCB_CAP_DCBX_HOST		0x01
+#define DCB_CAP_DCBX_LLD_MANAGED	0x02
+#define DCB_CAP_DCBX_VER_CEE		0x04
+#define DCB_CAP_DCBX_VER_IEEE		0x08
+#define DCB_CAP_DCBX_STATIC		0x10
+
+/**
  * enum dcbnl_numtcs_attrs - number of traffic classes
  *
  * @DCB_NUMTCS_ATTR_UNDEFINED: unspecified attribute to catch errors
@@ -355,4 +513,30 @@ enum dcbnl_app_attrs {
 	DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1,
 };
 
+/**
+ * enum dcbnl_featcfg_attrs - features conifiguration flags
+ *
+ * @DCB_FEATCFG_ATTR_UNDEFINED: unspecified attribute to catch errors
+ * @DCB_FEATCFG_ATTR_ALL: (NLA_FLAG) all features configuration attributes
+ * @DCB_FEATCFG_ATTR_PG: (NLA_U8) configuration flags for priority groups
+ * @DCB_FEATCFG_ATTR_PFC: (NLA_U8) configuration flags for priority
+ *                                 flow control
+ * @DCB_FEATCFG_ATTR_APP: (NLA_U8) configuration flags for application TLV
+ *
+ */
+#define DCB_FEATCFG_ERROR	0x01	/* error in feature resolution */
+#define DCB_FEATCFG_ENABLE	0x02	/* enable feature */
+#define DCB_FEATCFG_WILLING	0x04	/* feature is willing */
+#define DCB_FEATCFG_ADVERTISE	0x08	/* advertise feature */
+enum dcbnl_featcfg_attrs {
+	DCB_FEATCFG_ATTR_UNDEFINED,
+	DCB_FEATCFG_ATTR_ALL,
+	DCB_FEATCFG_ATTR_PG,
+	DCB_FEATCFG_ATTR_PFC,
+	DCB_FEATCFG_ATTR_APP,
+
+	__DCB_FEATCFG_ATTR_ENUM_MAX,
+	DCB_FEATCFG_ATTR_MAX = __DCB_FEATCFG_ATTR_ENUM_MAX - 1,
+};
+
 #endif /* __LINUX_DCBNL_H__ */
diff --git a/include/linux/dccp.h b/include/linux/dccp.h
index 749f01ccd26..010e2d87ed7 100644
--- a/include/linux/dccp.h
+++ b/include/linux/dccp.h
@@ -197,6 +197,21 @@ enum dccp_feature_numbers {
 	DCCPF_MAX_CCID_SPECIFIC = 255,
 };
 
+/* DCCP socket control message types for cmsg */
+enum dccp_cmsg_type {
+	DCCP_SCM_PRIORITY = 1,
+	DCCP_SCM_QPOLICY_MAX = 0xFFFF,
+	/* ^-- Up to here reserved exclusively for qpolicy parameters */
+	DCCP_SCM_MAX
+};
+
+/* DCCP priorities for outgoing/queued packets */
+enum dccp_packet_dequeueing_policy {
+	DCCPQ_POLICY_SIMPLE,
+	DCCPQ_POLICY_PRIO,
+	DCCPQ_POLICY_MAX
+};
+
 /* DCCP socket options */
 #define DCCP_SOCKOPT_PACKET_SIZE	1 /* XXX deprecated, without effect */
 #define DCCP_SOCKOPT_SERVICE		2
@@ -210,6 +225,8 @@ enum dccp_feature_numbers {
 #define DCCP_SOCKOPT_CCID		13
 #define DCCP_SOCKOPT_TX_CCID		14
 #define DCCP_SOCKOPT_RX_CCID		15
+#define DCCP_SOCKOPT_QPOLICY_ID		16
+#define DCCP_SOCKOPT_QPOLICY_TXQLEN	17
 #define DCCP_SOCKOPT_CCID_RX_INFO	128
 #define DCCP_SOCKOPT_CCID_TX_INFO	192
 
@@ -458,10 +475,13 @@ struct dccp_ackvec;
  * @dccps_hc_rx_ccid - CCID used for the receiver (or receiving half-connection)
  * @dccps_hc_tx_ccid - CCID used for the sender (or sending half-connection)
  * @dccps_options_received - parsed set of retrieved options
+ * @dccps_qpolicy - TX dequeueing policy, one of %dccp_packet_dequeueing_policy
+ * @dccps_tx_qlen - maximum length of the TX queue
  * @dccps_role - role of this sock, one of %dccp_role
  * @dccps_hc_rx_insert_options - receiver wants to add options when acking
  * @dccps_hc_tx_insert_options - sender wants to add options when sending
  * @dccps_server_timewait - server holds timewait state on close (RFC 4340, 8.3)
+ * @dccps_sync_scheduled - flag which signals "send out-of-band message soon"
  * @dccps_xmitlet - tasklet scheduled by the TX CCID to dequeue data packets
  * @dccps_xmit_timer - used by the TX CCID to delay sending (rate-based pacing)
  * @dccps_syn_rtt - RTT sample from Request/Response exchange (in usecs)
@@ -499,10 +519,13 @@ struct dccp_sock {
 	struct ccid			*dccps_hc_rx_ccid;
 	struct ccid			*dccps_hc_tx_ccid;
 	struct dccp_options_received	dccps_options_received;
+	__u8				dccps_qpolicy;
+	__u32				dccps_tx_qlen;
 	enum dccp_role			dccps_role:2;
 	__u8				dccps_hc_rx_insert_options:1;
 	__u8				dccps_hc_tx_insert_options:1;
 	__u8				dccps_server_timewait:1;
+	__u8				dccps_sync_scheduled:1;
 	struct tasklet_struct		dccps_xmitlet;
 	struct timer_list		dccps_xmit_timer;
 };
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 9d8688b92d8..8cd00ad98d3 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -824,6 +824,8 @@ enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie);
 #ifdef CONFIG_DMA_ENGINE
 enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx);
 void dma_issue_pending_all(void);
+struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
+void dma_release_channel(struct dma_chan *chan);
 #else
 static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
 {
@@ -831,7 +833,14 @@ static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descript
 }
 static inline void dma_issue_pending_all(void)
 {
-	do { } while (0);
+}
+static inline struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask,
+					      dma_filter_fn fn, void *fn_param)
+{
+	return NULL;
+}
+static inline void dma_release_channel(struct dma_chan *chan)
+{
 }
 #endif
 
@@ -842,8 +851,6 @@ void dma_async_device_unregister(struct dma_device *device);
 void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
 struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
 #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
-struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param);
-void dma_release_channel(struct dma_chan *chan);
 
 /* --- Helper iov-locking functions --- */
 
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index a7d9dc21391..7b776d71d36 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -175,10 +175,21 @@ static inline int set_msi_sid(struct irte *irte, struct pci_dev *dev)
 	return 0;
 }
 
-#define enable_intr_remapping(mode)	(-1)
-#define disable_intr_remapping()	(0)
-#define reenable_intr_remapping(mode)	(0)
 #define intr_remapping_enabled		(0)
+
+static inline int enable_intr_remapping(int eim)
+{
+	return -1;
+}
+
+static inline void disable_intr_remapping(void)
+{
+}
+
+static inline int reenable_intr_remapping(int eim)
+{
+	return 0;
+}
 #endif
 
 /* Can't use the common MSI interrupt functions
diff --git a/include/linux/drbd.h b/include/linux/drbd.h
index 9b2a0158f39..ef44c7a0638 100644
--- a/include/linux/drbd.h
+++ b/include/linux/drbd.h
@@ -53,7 +53,7 @@
 
 
 extern const char *drbd_buildtag(void);
-#define REL_VERSION "8.3.9rc2"
+#define REL_VERSION "8.3.9"
 #define API_VERSION 88
 #define PRO_VERSION_MIN 86
 #define PRO_VERSION_MAX 95
diff --git a/include/linux/elevator.h b/include/linux/elevator.h
index 4fd978e7eb8..4d857973d2c 100644
--- a/include/linux/elevator.h
+++ b/include/linux/elevator.h
@@ -195,15 +195,9 @@ enum {
 /*
  * io context count accounting
  */
-#define elv_ioc_count_mod(name, __val)				\
-	do {							\
-		preempt_disable();				\
-		__get_cpu_var(name) += (__val);			\
-		preempt_enable();				\
-	} while (0)
-
-#define elv_ioc_count_inc(name)	elv_ioc_count_mod(name, 1)
-#define elv_ioc_count_dec(name)	elv_ioc_count_mod(name, -1)
+#define elv_ioc_count_mod(name, __val) this_cpu_add(name, __val)
+#define elv_ioc_count_inc(name)	this_cpu_inc(name)
+#define elv_ioc_count_dec(name)	this_cpu_dec(name)
 
 #define elv_ioc_count_read(name)				\
 ({								\
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 6628a507fd3..1908929204a 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -691,7 +691,9 @@ struct ethtool_ops {
 #define ETHTOOL_GMSGLVL		0x00000007 /* Get driver message level */
 #define ETHTOOL_SMSGLVL		0x00000008 /* Set driver msg level. */
 #define ETHTOOL_NWAY_RST	0x00000009 /* Restart autonegotiation. */
-#define ETHTOOL_GLINK		0x0000000a /* Get link status (ethtool_value) */
+/* Get link status for host, i.e. whether the interface *and* the
+ * physical port (if there is one) are up (ethtool_value). */
+#define ETHTOOL_GLINK		0x0000000a
 #define ETHTOOL_GEEPROM		0x0000000b /* Get EEPROM data */
 #define ETHTOOL_SEEPROM		0x0000000c /* Set EEPROM data. */
 #define ETHTOOL_GCOALESCE	0x0000000e /* Get coalesce config */
diff --git a/include/linux/fanotify.h b/include/linux/fanotify.h
index 0f0121467fc..6c6133f76e1 100644
--- a/include/linux/fanotify.h
+++ b/include/linux/fanotify.h
@@ -83,11 +83,13 @@
 				 FAN_ALL_PERM_EVENTS |\
 				 FAN_Q_OVERFLOW)
 
-#define FANOTIFY_METADATA_VERSION	2
+#define FANOTIFY_METADATA_VERSION	3
 
 struct fanotify_event_metadata {
 	__u32 event_len;
-	__u32 vers;
+	__u8 vers;
+	__u8 reserved;
+	__u16 metadata_len;
 	__aligned_u64 mask;
 	__s32 fd;
 	__s32 pid;
@@ -96,11 +98,13 @@ struct fanotify_event_metadata {
 struct fanotify_response {
 	__s32 fd;
 	__u32 response;
-} __attribute__ ((packed));
+};
 
 /* Legit userspace responses to a _PERM event */
 #define FAN_ALLOW	0x01
 #define FAN_DENY	0x02
+/* No fd set in event */
+#define FAN_NOFD	-1
 
 /* Helper functions to deal with fanotify_event_metadata buffers */
 #define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 7fca3dc4e47..68ba85a00c0 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1092,6 +1092,8 @@ extern int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var);
 extern const unsigned char *fb_firmware_edid(struct device *device);
 extern void fb_edid_to_monspecs(unsigned char *edid,
 				struct fb_monspecs *specs);
+extern void fb_edid_add_monspecs(unsigned char *edid,
+				 struct fb_monspecs *specs);
 extern void fb_destroy_modedb(struct fb_videomode *modedb);
 extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
 extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
@@ -1122,6 +1124,7 @@ extern const struct fb_videomode *fb_find_best_display(const struct fb_monspecs
 
 /* drivers/video/fbcmap.c */
 extern int fb_alloc_cmap(struct fb_cmap *cmap, int len, int transp);
+extern int fb_alloc_cmap_gfp(struct fb_cmap *cmap, int len, int transp, gfp_t flags);
 extern void fb_dealloc_cmap(struct fb_cmap *cmap);
 extern int fb_copy_cmap(const struct fb_cmap *from, struct fb_cmap *to);
 extern int fb_cmap_to_user(const struct fb_cmap *from, struct fb_cmap_user *to);
@@ -1149,6 +1152,7 @@ struct fb_videomode {
 
 extern const char *fb_mode_option;
 extern const struct fb_videomode vesa_modes[];
+extern const struct fb_videomode cea_modes[64];
 
 struct fb_modelist {
 	struct list_head list;
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 69b43dbea6c..45266b75409 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -91,54 +91,6 @@ struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
 #define         BPF_TAX         0x00
 #define         BPF_TXA         0x80
 
-enum {
-	BPF_S_RET_K = 0,
-	BPF_S_RET_A,
-	BPF_S_ALU_ADD_K,
-	BPF_S_ALU_ADD_X,
-	BPF_S_ALU_SUB_K,
-	BPF_S_ALU_SUB_X,
-	BPF_S_ALU_MUL_K,
-	BPF_S_ALU_MUL_X,
-	BPF_S_ALU_DIV_X,
-	BPF_S_ALU_AND_K,
-	BPF_S_ALU_AND_X,
-	BPF_S_ALU_OR_K,
-	BPF_S_ALU_OR_X,
-	BPF_S_ALU_LSH_K,
-	BPF_S_ALU_LSH_X,
-	BPF_S_ALU_RSH_K,
-	BPF_S_ALU_RSH_X,
-	BPF_S_ALU_NEG,
-	BPF_S_LD_W_ABS,
-	BPF_S_LD_H_ABS,
-	BPF_S_LD_B_ABS,
-	BPF_S_LD_W_LEN,
-	BPF_S_LD_W_IND,
-	BPF_S_LD_H_IND,
-	BPF_S_LD_B_IND,
-	BPF_S_LD_IMM,
-	BPF_S_LDX_W_LEN,
-	BPF_S_LDX_B_MSH,
-	BPF_S_LDX_IMM,
-	BPF_S_MISC_TAX,
-	BPF_S_MISC_TXA,
-	BPF_S_ALU_DIV_K,
-	BPF_S_LD_MEM,
-	BPF_S_LDX_MEM,
-	BPF_S_ST,
-	BPF_S_STX,
-	BPF_S_JMP_JA,
-	BPF_S_JMP_JEQ_K,
-	BPF_S_JMP_JEQ_X,
-	BPF_S_JMP_JGE_K,
-	BPF_S_JMP_JGE_X,
-	BPF_S_JMP_JGT_K,
-	BPF_S_JMP_JGT_X,
-	BPF_S_JMP_JSET_K,
-	BPF_S_JMP_JSET_X,
-};
-
 #ifndef BPF_MAXINSNS
 #define BPF_MAXINSNS 4096
 #endif
@@ -172,7 +124,9 @@ enum {
 #define SKF_AD_MARK 	20
 #define SKF_AD_QUEUE	24
 #define SKF_AD_HATYPE	28
-#define SKF_AD_MAX	32
+#define SKF_AD_RXHASH	32
+#define SKF_AD_CPU	36
+#define SKF_AD_MAX	40
 #define SKF_NET_OFF   (-0x100000)
 #define SKF_LL_OFF    (-0x200000)
 
@@ -194,8 +148,8 @@ struct sk_buff;
 struct sock;
 
 extern int sk_filter(struct sock *sk, struct sk_buff *skb);
-extern unsigned int sk_run_filter(struct sk_buff *skb,
-				  struct sock_filter *filter, int flen);
+extern unsigned int sk_run_filter(const struct sk_buff *skb,
+				  const struct sock_filter *filter);
 extern int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk);
 extern int sk_detach_filter(struct sock *sk);
 extern int sk_chk_filter(struct sock_filter *filter, int flen);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 334d68a1710..baf3e556ff0 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -34,9 +34,9 @@
 #define SEEK_MAX	SEEK_END
 
 struct fstrim_range {
-	uint64_t start;
-	uint64_t len;
-	uint64_t minlen;
+	__u64 start;
+	__u64 len;
+	__u64 minlen;
 };
 
 /* And dynamically-tunable limits and defaults: */
@@ -392,6 +392,7 @@ struct inodes_stat_t {
 #include <linux/capability.h>
 #include <linux/semaphore.h>
 #include <linux/fiemap.h>
+#include <linux/rculist_bl.h>
 
 #include <asm/atomic.h>
 #include <asm/byteorder.h>
@@ -602,6 +603,7 @@ struct address_space_operations {
 	sector_t (*bmap)(struct address_space *, sector_t);
 	void (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, gfp_t);
+	void (*freepage)(struct page *);
 	ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
 			loff_t offset, unsigned long nr_segs);
 	int (*get_xip_mem)(struct address_space *, pgoff_t, int,
@@ -732,16 +734,31 @@ struct posix_acl;
 #define ACL_NOT_CACHED ((void *)(-1))
 
 struct inode {
+	/* RCU path lookup touches following: */
+	umode_t			i_mode;
+	uid_t			i_uid;
+	gid_t			i_gid;
+	const struct inode_operations	*i_op;
+	struct super_block	*i_sb;
+
+	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
+	unsigned int		i_flags;
+	struct mutex		i_mutex;
+
+	unsigned long		i_state;
+	unsigned long		dirtied_when;	/* jiffies of first dirtying */
+
 	struct hlist_node	i_hash;
 	struct list_head	i_wb_list;	/* backing dev IO list */
 	struct list_head	i_lru;		/* inode LRU list */
 	struct list_head	i_sb_list;
-	struct list_head	i_dentry;
+	union {
+		struct list_head	i_dentry;
+		struct rcu_head		i_rcu;
+	};
 	unsigned long		i_ino;
 	atomic_t		i_count;
 	unsigned int		i_nlink;
-	uid_t			i_uid;
-	gid_t			i_gid;
 	dev_t			i_rdev;
 	unsigned int		i_blkbits;
 	u64			i_version;
@@ -754,13 +771,8 @@ struct inode {
 	struct timespec		i_ctime;
 	blkcnt_t		i_blocks;
 	unsigned short          i_bytes;
-	umode_t			i_mode;
-	spinlock_t		i_lock;	/* i_blocks, i_bytes, maybe i_size */
-	struct mutex		i_mutex;
 	struct rw_semaphore	i_alloc_sem;
-	const struct inode_operations	*i_op;
 	const struct file_operations	*i_fop;	/* former ->i_op->default_file_ops */
-	struct super_block	*i_sb;
 	struct file_lock	*i_flock;
 	struct address_space	*i_mapping;
 	struct address_space	i_data;
@@ -781,11 +793,6 @@ struct inode {
 	struct hlist_head	i_fsnotify_marks;
 #endif
 
-	unsigned long		i_state;
-	unsigned long		dirtied_when;	/* jiffies of first dirtying */
-
-	unsigned int		i_flags;
-
 #ifdef CONFIG_IMA
 	/* protected by i_lock */
 	unsigned int		i_readcount; /* struct files open RO */
@@ -1371,13 +1378,13 @@ struct super_block {
 	const struct xattr_handler **s_xattr;
 
 	struct list_head	s_inodes;	/* all inodes */
-	struct hlist_head	s_anon;		/* anonymous dentries for (nfs) exporting */
+	struct hlist_bl_head	s_anon;		/* anonymous dentries for (nfs) exporting */
 #ifdef CONFIG_SMP
 	struct list_head __percpu *s_files;
 #else
 	struct list_head	s_files;
 #endif
-	/* s_dentry_lru and s_nr_dentry_unused are protected by dcache_lock */
+	/* s_dentry_lru, s_nr_dentry_unused protected by dcache.c lru locks */
 	struct list_head	s_dentry_lru;	/* unused dentry lru */
 	int			s_nr_dentry_unused;	/* # of dentry on lru */
 
@@ -1544,9 +1551,18 @@ struct file_operations {
 	int (*setlease)(struct file *, long, struct file_lock **);
 };
 
+#define IPERM_FLAG_RCU	0x0001
+
 struct inode_operations {
-	int (*create) (struct inode *,struct dentry *,int, struct nameidata *);
 	struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *);
+	void * (*follow_link) (struct dentry *, struct nameidata *);
+	int (*permission) (struct inode *, int, unsigned int);
+	int (*check_acl)(struct inode *, int, unsigned int);
+
+	int (*readlink) (struct dentry *, char __user *,int);
+	void (*put_link) (struct dentry *, struct nameidata *, void *);
+
+	int (*create) (struct inode *,struct dentry *,int, struct nameidata *);
 	int (*link) (struct dentry *,struct inode *,struct dentry *);
 	int (*unlink) (struct inode *,struct dentry *);
 	int (*symlink) (struct inode *,struct dentry *,const char *);
@@ -1555,12 +1571,7 @@ struct inode_operations {
 	int (*mknod) (struct inode *,struct dentry *,int,dev_t);
 	int (*rename) (struct inode *, struct dentry *,
 			struct inode *, struct dentry *);
-	int (*readlink) (struct dentry *, char __user *,int);
-	void * (*follow_link) (struct dentry *, struct nameidata *);
-	void (*put_link) (struct dentry *, struct nameidata *, void *);
 	void (*truncate) (struct inode *);
-	int (*permission) (struct inode *, int);
-	int (*check_acl)(struct inode *, int);
 	int (*setattr) (struct dentry *, struct iattr *);
 	int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
 	int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
@@ -1572,7 +1583,7 @@ struct inode_operations {
 			  loff_t len);
 	int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start,
 		      u64 len);
-};
+} ____cacheline_aligned;
 
 struct seq_file;
 
@@ -1612,7 +1623,6 @@ struct super_operations {
 	ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
 #endif
 	int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t);
-	int (*trim_fs) (struct super_block *, struct fstrim_range *);
 };
 
 /*
@@ -2158,8 +2168,8 @@ extern sector_t bmap(struct inode *, sector_t);
 #endif
 extern int notify_change(struct dentry *, struct iattr *);
 extern int inode_permission(struct inode *, int);
-extern int generic_permission(struct inode *, int,
-		int (*check_acl)(struct inode *, int));
+extern int generic_permission(struct inode *, int, unsigned int,
+		int (*check_acl)(struct inode *, int, unsigned int));
 
 static inline bool execute_ok(struct inode *inode)
 {
@@ -2230,6 +2240,7 @@ extern void iget_failed(struct inode *);
 extern void end_writeback(struct inode *);
 extern void __destroy_inode(struct inode *);
 extern struct inode *new_inode(struct super_block *);
+extern void free_inode_nonrcu(struct inode *inode);
 extern int should_remove_suid(struct dentry *);
 extern int file_remove_suid(struct file *);
 
@@ -2446,6 +2457,10 @@ static inline ino_t parent_ino(struct dentry *dentry)
 {
 	ino_t res;
 
+	/*
+	 * Don't strictly need d_lock here? If the parent ino could change
+	 * then surely we'd have a deeper race in the caller?
+	 */
 	spin_lock(&dentry->d_lock);
 	res = dentry->d_parent->d_inode->i_ino;
 	spin_unlock(&dentry->d_lock);
diff --git a/include/linux/fs_struct.h b/include/linux/fs_struct.h
index a42b5bf02f8..003dc0fd734 100644
--- a/include/linux/fs_struct.h
+++ b/include/linux/fs_struct.h
@@ -2,10 +2,13 @@
 #define _LINUX_FS_STRUCT_H
 
 #include <linux/path.h>
+#include <linux/spinlock.h>
+#include <linux/seqlock.h>
 
 struct fs_struct {
 	int users;
 	spinlock_t lock;
+	seqcount_t seq;
 	int umask;
 	int in_exec;
 	struct path root, pwd;
diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h
index fc295d7ea46..781d4671415 100644
--- a/include/linux/fsl-diu-fb.h
+++ b/include/linux/fsl-diu-fb.h
@@ -54,7 +54,6 @@ struct aoi_display_offset {
 };
 
 #define MFB_SET_CHROMA_KEY	_IOW('M', 1, struct mfb_chroma_key)
-#define MFB_WAIT_FOR_VSYNC	_IOW('F', 0x20, u_int32_t)
 #define MFB_SET_BRIGHTNESS	_IOW('M', 3, __u8)
 
 #define MFB_SET_ALPHA		0x80014d00
diff --git a/include/linux/fsnotify.h b/include/linux/fsnotify.h
index 5c185fa2708..2a53f10712b 100644
--- a/include/linux/fsnotify.h
+++ b/include/linux/fsnotify.h
@@ -17,7 +17,6 @@
 
 /*
  * fsnotify_d_instantiate - instantiate a dentry for inode
- * Called with dcache_lock held.
  */
 static inline void fsnotify_d_instantiate(struct dentry *dentry,
 					  struct inode *inode)
@@ -62,7 +61,6 @@ static inline int fsnotify_perm(struct file *file, int mask)
 
 /*
  * fsnotify_d_move - dentry has been moved
- * Called with dcache_lock and dentry->d_lock held.
  */
 static inline void fsnotify_d_move(struct dentry *dentry)
 {
@@ -235,9 +233,6 @@ static inline void fsnotify_open(struct file *file)
 	if (S_ISDIR(inode->i_mode))
 		mask |= FS_ISDIR;
 
-	/* FMODE_NONOTIFY must never be set from user */
-	file->f_mode &= ~FMODE_NONOTIFY;
-
 	fsnotify_parent(path, NULL, mask);
 	fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
 }
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 0a68f924f06..69ad89b5048 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -166,7 +166,7 @@ struct fsnotify_group {
 			struct mutex access_mutex;
 			struct list_head access_list;
 			wait_queue_head_t access_waitq;
-			bool bypass_perm; /* protected by access_mutex */
+			atomic_t bypass_perm;
 #endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
 			int f_flags;
 			unsigned int max_marks;
@@ -329,9 +329,15 @@ static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
 {
 	struct dentry *parent;
 
-	assert_spin_locked(&dcache_lock);
 	assert_spin_locked(&dentry->d_lock);
 
+	/*
+	 * Serialisation of setting PARENT_WATCHED on the dentries is provided
+	 * by d_lock. If inotify_inode_watched changes after we have taken
+	 * d_lock, the following __fsnotify_update_child_dentry_flags call will
+	 * find our entry, so it will spin until we complete here, and update
+	 * us with the new state.
+	 */
 	parent = dentry->d_parent;
 	if (parent->d_inode && fsnotify_inode_watches_children(parent->d_inode))
 		dentry->d_flags |= DCACHE_FSNOTIFY_PARENT_WATCHED;
@@ -341,15 +347,12 @@ static inline void __fsnotify_update_dcache_flags(struct dentry *dentry)
 
 /*
  * fsnotify_d_instantiate - instantiate a dentry for inode
- * Called with dcache_lock held.
  */
 static inline void __fsnotify_d_instantiate(struct dentry *dentry, struct inode *inode)
 {
 	if (!inode)
 		return;
 
-	assert_spin_locked(&dcache_lock);
-
 	spin_lock(&dentry->d_lock);
 	__fsnotify_update_dcache_flags(dentry);
 	spin_unlock(&dentry->d_lock);
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 8beabb958f6..47e3997f7b5 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -154,12 +154,14 @@ enum {
 	TRACE_EVENT_FL_ENABLED_BIT,
 	TRACE_EVENT_FL_FILTERED_BIT,
 	TRACE_EVENT_FL_RECORDED_CMD_BIT,
+	TRACE_EVENT_FL_CAP_ANY_BIT,
 };
 
 enum {
 	TRACE_EVENT_FL_ENABLED		= (1 << TRACE_EVENT_FL_ENABLED_BIT),
 	TRACE_EVENT_FL_FILTERED		= (1 << TRACE_EVENT_FL_FILTERED_BIT),
 	TRACE_EVENT_FL_RECORDED_CMD	= (1 << TRACE_EVENT_FL_RECORDED_CMD_BIT),
+	TRACE_EVENT_FL_CAP_ANY		= (1 << TRACE_EVENT_FL_CAP_ANY_BIT),
 };
 
 struct ftrace_event_call {
@@ -196,6 +198,14 @@ struct ftrace_event_call {
 #endif
 };
 
+#define __TRACE_EVENT_FLAGS(name, value)				\
+	static int __init trace_init_flags_##name(void)			\
+	{								\
+		event_##name.flags = value;				\
+		return 0;						\
+	}								\
+	early_initcall(trace_init_flags_##name);
+
 #define PERF_MAX_TRACE_SIZE	2048
 
 #define MAX_FILTER_PRED		32
@@ -215,6 +225,10 @@ enum {
 	FILTER_PTR_STRING,
 };
 
+#define EVENT_STORAGE_SIZE 128
+extern struct mutex event_storage_mutex;
+extern char event_storage[EVENT_STORAGE_SIZE];
+
 extern int trace_event_raw_init(struct ftrace_event_call *call);
 extern int trace_define_field(struct ftrace_event_call *call, const char *type,
 			      const char *name, int offset, int size,
diff --git a/include/linux/generic_acl.h b/include/linux/generic_acl.h
index 574bea4013b..0437e377b55 100644
--- a/include/linux/generic_acl.h
+++ b/include/linux/generic_acl.h
@@ -10,6 +10,6 @@ extern const struct xattr_handler generic_acl_default_handler;
 
 int generic_acl_init(struct inode *, struct inode *);
 int generic_acl_chmod(struct inode *);
-int generic_check_acl(struct inode *inode, int mask);
+int generic_check_acl(struct inode *inode, int mask, unsigned int flags);
 
 #endif /* LINUX_GENERIC_ACL_H */
diff --git a/include/linux/gfp.h b/include/linux/gfp.h
index e8713d55360..f54adfcbec9 100644
--- a/include/linux/gfp.h
+++ b/include/linux/gfp.h
@@ -360,7 +360,7 @@ void drain_local_pages(void *dummy);
 
 extern gfp_t gfp_allowed_mask;
 
-extern void set_gfp_allowed_mask(gfp_t mask);
-extern gfp_t clear_gfp_allowed_mask(gfp_t mask);
+extern void pm_restrict_gfp_mask(void);
+extern void pm_restore_gfp_mask(void);
 
 #endif /* __LINUX_GFP_H */
diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h
index ce73a30113b..dd1a56fbe92 100644
--- a/include/linux/gpio_keys.h
+++ b/include/linux/gpio_keys.h
@@ -16,6 +16,8 @@ struct gpio_keys_button {
 struct gpio_keys_platform_data {
 	struct gpio_keys_button *buttons;
 	int nbuttons;
+	unsigned int poll_interval;	/* polling interval in msecs -
+					   for polling driver only */
 	unsigned int rep:1;		/* enable input subsystem auto repeat */
 	int (*enable)(struct device *dev);
 	void (*disable)(struct device *dev);
diff --git a/include/linux/hardirq.h b/include/linux/hardirq.h
index 41cb31f14ee..32f9fd6619b 100644
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -2,9 +2,6 @@
 #define LINUX_HARDIRQ_H
 
 #include <linux/preempt.h>
-#ifdef CONFIG_PREEMPT
-#include <linux/smp_lock.h>
-#endif
 #include <linux/lockdep.h>
 #include <linux/ftrace_irq.h>
 #include <asm/hardirq.h>
@@ -97,7 +94,8 @@
 #define in_nmi()	(preempt_count() & NMI_MASK)
 
 #if defined(CONFIG_PREEMPT) && defined(CONFIG_BKL)
-# define PREEMPT_INATOMIC_BASE kernel_locked()
+# include <linux/sched.h>
+# define PREEMPT_INATOMIC_BASE (current->lock_depth >= 0)
 #else
 # define PREEMPT_INATOMIC_BASE 0
 #endif
diff --git a/include/linux/highmem.h b/include/linux/highmem.h
index e9138198e82..3a93f73a8ac 100644
--- a/include/linux/highmem.h
+++ b/include/linux/highmem.h
@@ -5,6 +5,7 @@
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/uaccess.h>
+#include <linux/hardirq.h>
 
 #include <asm/cacheflush.h>
 
@@ -80,7 +81,8 @@ DECLARE_PER_CPU(int, __kmap_atomic_idx);
 
 static inline int kmap_atomic_idx_push(void)
 {
-	int idx = __get_cpu_var(__kmap_atomic_idx)++;
+	int idx = __this_cpu_inc_return(__kmap_atomic_idx) - 1;
+
 #ifdef CONFIG_DEBUG_HIGHMEM
 	WARN_ON_ONCE(in_irq() && !irqs_disabled());
 	BUG_ON(idx > KM_TYPE_NR);
@@ -90,16 +92,18 @@ static inline int kmap_atomic_idx_push(void)
 
 static inline int kmap_atomic_idx(void)
 {
-	return __get_cpu_var(__kmap_atomic_idx) - 1;
+	return __this_cpu_read(__kmap_atomic_idx) - 1;
 }
 
-static inline int kmap_atomic_idx_pop(void)
+static inline void kmap_atomic_idx_pop(void)
 {
-	int idx = --__get_cpu_var(__kmap_atomic_idx);
 #ifdef CONFIG_DEBUG_HIGHMEM
+	int idx = __this_cpu_dec_return(__kmap_atomic_idx);
+
 	BUG_ON(idx < 0);
+#else
+	__this_cpu_dec(__kmap_atomic_idx);
 #endif
-	return idx;
 }
 
 #endif
diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h
index fd0c1b857d3..330586ffffb 100644
--- a/include/linux/hrtimer.h
+++ b/include/linux/hrtimer.h
@@ -22,7 +22,7 @@
 #include <linux/wait.h>
 #include <linux/percpu.h>
 #include <linux/timer.h>
-
+#include <linux/timerqueue.h>
 
 struct hrtimer_clock_base;
 struct hrtimer_cpu_base;
@@ -79,8 +79,8 @@ enum hrtimer_restart {
 
 /**
  * struct hrtimer - the basic hrtimer structure
- * @node:	red black tree node for time ordered insertion
- * @_expires:	the absolute expiry time in the hrtimers internal
+ * @node:	timerqueue node, which also manages node.expires,
+ *		the absolute expiry time in the hrtimers internal
  *		representation. The time is related to the clock on
  *		which the timer is based. Is setup by adding
  *		slack to the _softexpires value. For non range timers
@@ -101,8 +101,7 @@ enum hrtimer_restart {
  * The hrtimer structure must be initialized by hrtimer_init()
  */
 struct hrtimer {
-	struct rb_node			node;
-	ktime_t				_expires;
+	struct timerqueue_node		node;
 	ktime_t				_softexpires;
 	enum hrtimer_restart		(*function)(struct hrtimer *);
 	struct hrtimer_clock_base	*base;
@@ -141,8 +140,7 @@ struct hrtimer_sleeper {
 struct hrtimer_clock_base {
 	struct hrtimer_cpu_base	*cpu_base;
 	clockid_t		index;
-	struct rb_root		active;
-	struct rb_node		*first;
+	struct timerqueue_head	active;
 	ktime_t			resolution;
 	ktime_t			(*get_time)(void);
 	ktime_t			softirq_time;
@@ -158,7 +156,6 @@ struct hrtimer_clock_base {
  * @lock:		lock protecting the base and associated clock bases
  *			and timers
  * @clock_base:		array of clock bases for this cpu
- * @curr_timer:		the timer which is executing a callback right now
  * @expires_next:	absolute time of the next event which was scheduled
  *			via clock_set_next_event()
  * @hres_active:	State of high resolution mode
@@ -184,43 +181,43 @@ struct hrtimer_cpu_base {
 
 static inline void hrtimer_set_expires(struct hrtimer *timer, ktime_t time)
 {
-	timer->_expires = time;
+	timer->node.expires = time;
 	timer->_softexpires = time;
 }
 
 static inline void hrtimer_set_expires_range(struct hrtimer *timer, ktime_t time, ktime_t delta)
 {
 	timer->_softexpires = time;
-	timer->_expires = ktime_add_safe(time, delta);
+	timer->node.expires = ktime_add_safe(time, delta);
 }
 
 static inline void hrtimer_set_expires_range_ns(struct hrtimer *timer, ktime_t time, unsigned long delta)
 {
 	timer->_softexpires = time;
-	timer->_expires = ktime_add_safe(time, ns_to_ktime(delta));
+	timer->node.expires = ktime_add_safe(time, ns_to_ktime(delta));
 }
 
 static inline void hrtimer_set_expires_tv64(struct hrtimer *timer, s64 tv64)
 {
-	timer->_expires.tv64 = tv64;
+	timer->node.expires.tv64 = tv64;
 	timer->_softexpires.tv64 = tv64;
 }
 
 static inline void hrtimer_add_expires(struct hrtimer *timer, ktime_t time)
 {
-	timer->_expires = ktime_add_safe(timer->_expires, time);
+	timer->node.expires = ktime_add_safe(timer->node.expires, time);
 	timer->_softexpires = ktime_add_safe(timer->_softexpires, time);
 }
 
 static inline void hrtimer_add_expires_ns(struct hrtimer *timer, u64 ns)
 {
-	timer->_expires = ktime_add_ns(timer->_expires, ns);
+	timer->node.expires = ktime_add_ns(timer->node.expires, ns);
 	timer->_softexpires = ktime_add_ns(timer->_softexpires, ns);
 }
 
 static inline ktime_t hrtimer_get_expires(const struct hrtimer *timer)
 {
-	return timer->_expires;
+	return timer->node.expires;
 }
 
 static inline ktime_t hrtimer_get_softexpires(const struct hrtimer *timer)
@@ -230,7 +227,7 @@ static inline ktime_t hrtimer_get_softexpires(const struct hrtimer *timer)
 
 static inline s64 hrtimer_get_expires_tv64(const struct hrtimer *timer)
 {
-	return timer->_expires.tv64;
+	return timer->node.expires.tv64;
 }
 static inline s64 hrtimer_get_softexpires_tv64(const struct hrtimer *timer)
 {
@@ -239,12 +236,12 @@ static inline s64 hrtimer_get_softexpires_tv64(const struct hrtimer *timer)
 
 static inline s64 hrtimer_get_expires_ns(const struct hrtimer *timer)
 {
-	return ktime_to_ns(timer->_expires);
+	return ktime_to_ns(timer->node.expires);
 }
 
 static inline ktime_t hrtimer_expires_remaining(const struct hrtimer *timer)
 {
-    return ktime_sub(timer->_expires, timer->base->get_time());
+	return ktime_sub(timer->node.expires, timer->base->get_time());
 }
 
 #ifdef CONFIG_HIGH_RES_TIMERS
diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h
index a2d6ea49ec5..d1e55fed2c7 100644
--- a/include/linux/hw_breakpoint.h
+++ b/include/linux/hw_breakpoint.h
@@ -33,6 +33,8 @@ enum bp_type_idx {
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 
+extern int __init init_hw_breakpoint(void);
+
 static inline void hw_breakpoint_init(struct perf_event_attr *attr)
 {
 	memset(attr, 0, sizeof(*attr));
@@ -108,6 +110,8 @@ static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp)
 
 #else /* !CONFIG_HAVE_HW_BREAKPOINT */
 
+static inline int __init init_hw_breakpoint(void) { return 0; }
+
 static inline struct perf_event *
 register_user_hw_breakpoint(struct perf_event_attr *attr,
 			    perf_overflow_handler_t triggered,
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index e844a0b1869..4bef5c55716 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -32,28 +32,6 @@
  */
 
 /* --- Bit algorithm adapters						*/
-#define I2C_HW_B_BT848		0x010005 /* BT848 video boards */
-#define I2C_HW_B_RIVA		0x010010 /* Riva based graphics cards */
-#define I2C_HW_B_ZR36067	0x010019 /* Zoran-36057/36067 based boards */
 #define I2C_HW_B_CX2388x	0x01001b /* connexant 2388x based tv cards */
-#define I2C_HW_B_EM28XX		0x01001f /* em28xx video capture cards */
-#define I2C_HW_B_CX2341X	0x010020 /* Conexant CX2341X MPEG encoder cards */
-#define I2C_HW_B_CX23885	0x010022 /* conexant 23885 based tv cards (bus1) */
-#define I2C_HW_B_AU0828		0x010023 /* auvitek au0828 usb bridge */
-#define I2C_HW_B_CX231XX	0x010024 /* Conexant CX231XX USB based cards */
-#define I2C_HW_B_HDPVR		0x010025 /* Hauppauge HD PVR */
-
-/* --- SGI adapters							*/
-#define I2C_HW_SGI_VINO		0x160000
-
-/* --- SMBus only adapters						*/
-#define I2C_HW_SMBUS_W9968CF	0x04000d
-#define I2C_HW_SMBUS_OV511	0x04000e /* OV511(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_OV518	0x04000f /* OV518(+) USB 1.1 webcam ICs */
-#define I2C_HW_SMBUS_CAFE	0x040012 /* Marvell 88ALP01 "CAFE" cam  */
-
-/* --- Miscellaneous adapters */
-#define I2C_HW_SAA7146		0x060000 /* SAA7146 video decoder bus */
-#define I2C_HW_SAA7134		0x090000 /* SAA7134 video decoder bus */
 
 #endif /* LINUX_I2C_ID_H */
diff --git a/include/linux/i2c-omap.h b/include/linux/i2c-omap.h
index 78ebf507ce5..7472449cbb7 100644
--- a/include/linux/i2c-omap.h
+++ b/include/linux/i2c-omap.h
@@ -1,9 +1,14 @@
 #ifndef __I2C_OMAP_H__
 #define __I2C_OMAP_H__
 
+#include <linux/platform_device.h>
+
 struct omap_i2c_bus_platform_data {
 	u32		clkrate;
 	void		(*set_mpu_wkup_lat)(struct device *dev, long set);
+	int		(*device_enable) (struct platform_device *pdev);
+	int		(*device_shutdown) (struct platform_device *pdev);
+	int		(*device_idle) (struct platform_device *pdev);
 };
 
 #endif
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 889b35abaed..56cfe23ffb3 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -353,7 +353,7 @@ struct i2c_algorithm {
  */
 struct i2c_adapter {
 	struct module *owner;
-	unsigned int id;
+	unsigned int id __deprecated;
 	unsigned int class;		  /* classes to allow probing for */
 	const struct i2c_algorithm *algo; /* the algorithm to access the bus */
 	void *algo_data;
diff --git a/include/linux/i2c/adp5588.h b/include/linux/i2c/adp5588.h
index 3c5d6b6e765..cec17cf6cac 100644
--- a/include/linux/i2c/adp5588.h
+++ b/include/linux/i2c/adp5588.h
@@ -1,7 +1,7 @@
 /*
  * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
  *
- * Copyright 2009 Analog Devices Inc.
+ * Copyright 2009-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -77,13 +77,26 @@
  /* Configuration Register1 */
 #define ADP5588_AUTO_INC	(1 << 7)
 #define ADP5588_GPIEM_CFG	(1 << 6)
+#define ADP5588_OVR_FLOW_M	(1 << 5)
 #define ADP5588_INT_CFG		(1 << 4)
+#define ADP5588_OVR_FLOW_IEN	(1 << 3)
+#define ADP5588_K_LCK_IM	(1 << 2)
 #define ADP5588_GPI_IEN		(1 << 1)
+#define ADP5588_KE_IEN		(1 << 0)
 
 /* Interrupt Status Register */
+#define ADP5588_CMP2_INT	(1 << 5)
+#define ADP5588_CMP1_INT	(1 << 4)
+#define ADP5588_OVR_FLOW_INT	(1 << 3)
+#define ADP5588_K_LCK_INT	(1 << 2)
 #define ADP5588_GPI_INT		(1 << 1)
 #define ADP5588_KE_INT		(1 << 0)
 
+/* Key Lock and Event Counter Register */
+#define ADP5588_K_LCK_EN	(1 << 6)
+#define ADP5588_LCK21		0x30
+#define ADP5588_KEC		0xF
+
 #define ADP5588_MAXGPIO		18
 #define ADP5588_BANK(offs)	((offs) >> 3)
 #define ADP5588_BIT(offs)	(1u << ((offs) & 0x7))
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index c760991b354..61b9609e55f 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -593,6 +593,13 @@ enum twl4030_usb_mode {
 
 struct twl4030_usb_data {
 	enum twl4030_usb_mode	usb_mode;
+
+	int		(*phy_init)(struct device *dev);
+	int		(*phy_exit)(struct device *dev);
+	/* Power on/off the PHY */
+	int		(*phy_power)(struct device *dev, int iD, int on);
+	/* enable/disable  phy clocks */
+	int		(*phy_set_clock)(struct device *dev, int on);
 };
 
 struct twl4030_ins {
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index ed5a03cbe18..6042228954a 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -122,6 +122,7 @@
 
 /* U-APSD queue for WMM IEs sent by AP */
 #define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD	(1<<7)
+#define IEEE80211_WMM_IE_AP_QOSINFO_PARAM_SET_CNT_MASK	0x0f
 
 /* U-APSD queues for WMM IEs sent by STA */
 #define IEEE80211_WMM_IE_STA_QOSINFO_AC_VO	(1<<0)
@@ -535,7 +536,6 @@ struct ieee80211s_hdr {
 	__le32 seqnum;
 	u8 eaddr1[6];
 	u8 eaddr2[6];
-	u8 eaddr3[6];
 } __attribute__ ((packed));
 
 /* Mesh flags */
@@ -1223,6 +1223,9 @@ enum ieee80211_eid {
 	WLAN_EID_BSS_AC_ACCESS_DELAY = 68,
 	WLAN_EID_RRM_ENABLED_CAPABILITIES = 70,
 	WLAN_EID_MULTIPLE_BSSID = 71,
+	WLAN_EID_BSS_COEX_2040 = 72,
+	WLAN_EID_OVERLAP_BSS_SCAN_PARAM = 74,
+	WLAN_EID_EXT_CAPABILITY = 127,
 
 	WLAN_EID_MOBILITY_DOMAIN = 54,
 	WLAN_EID_FAST_BSS_TRANSITION = 55,
@@ -1287,6 +1290,31 @@ enum ieee80211_key_len {
 	WLAN_KEY_LEN_AES_CMAC = 16,
 };
 
+/**
+ * enum - mesh path selection protocol identifier
+ *
+ * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol
+ * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will
+ * be specified in a vendor specific information element
+ */
+enum {
+	IEEE80211_PATH_PROTOCOL_HWMP = 0,
+	IEEE80211_PATH_PROTOCOL_VENDOR = 255,
+};
+
+/**
+ * enum - mesh path selection metric identifier
+ *
+ * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric
+ * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be
+ * specified in a vendor specific information element
+ */
+enum {
+	IEEE80211_PATH_METRIC_AIRTIME = 0,
+	IEEE80211_PATH_METRIC_VENDOR = 255,
+};
+
+
 /*
  * IEEE 802.11-2007 7.3.2.9 Country information element
  *
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index 0d241a5c490..f7e73c338c4 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -102,7 +102,9 @@ struct __fdb_entry {
 #include <linux/netdevice.h>
 
 extern void brioctl_set(int (*ioctl_hook)(struct net *, unsigned int, void __user *));
-extern int (*br_should_route_hook)(struct sk_buff *skb);
+
+typedef int (*br_should_route_hook_t)(struct sk_buff *skb);
+extern br_should_route_hook_t __rcu *br_should_route_hook;
 
 #endif
 
diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h
index f9c3df03db0..be69043d289 100644
--- a/include/linux/if_ether.h
+++ b/include/linux/if_ether.h
@@ -72,6 +72,7 @@
 #define ETH_P_MPLS_UC	0x8847		/* MPLS Unicast traffic		*/
 #define ETH_P_MPLS_MC	0x8848		/* MPLS Multicast traffic	*/
 #define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
+#define ETH_P_LINK_CTL	0x886c		/* HPNA, wlan link local tunnel */
 #define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
 					 * over Ethernet
 					 */
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 2fc66dd783e..6485d2a89be 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -80,6 +80,24 @@ struct rtnl_link_ifmap {
 	__u8	port;
 };
 
+/*
+ * IFLA_AF_SPEC
+ *   Contains nested attributes for address family specific attributes.
+ *   Each address family may create a attribute with the address family
+ *   number as type and create its own attribute structure in it.
+ *
+ *   Example:
+ *   [IFLA_AF_SPEC] = {
+ *       [AF_INET] = {
+ *           [IFLA_INET_CONF] = ...,
+ *       },
+ *       [AF_INET6] = {
+ *           [IFLA_INET6_FLAGS] = ...,
+ *           [IFLA_INET6_CONF] = ...,
+ *       }
+ *   }
+ */
+
 enum {
 	IFLA_UNSPEC,
 	IFLA_ADDRESS,
@@ -116,6 +134,7 @@ enum {
 	IFLA_STATS64,
 	IFLA_VF_PORTS,
 	IFLA_PORT_SELF,
+	IFLA_AF_SPEC,
 	__IFLA_MAX
 };
 
@@ -128,6 +147,14 @@ enum {
 #define IFLA_PAYLOAD(n) NLMSG_PAYLOAD(n,sizeof(struct ifinfomsg))
 #endif
 
+enum {
+	IFLA_INET_UNSPEC,
+	IFLA_INET_CONF,
+	__IFLA_INET_MAX,
+};
+
+#define IFLA_INET_MAX (__IFLA_INET_MAX - 1)
+
 /* ifi_flags.
 
    IFF_* flags.
@@ -232,6 +259,7 @@ enum macvlan_mode {
 	MACVLAN_MODE_PRIVATE = 1, /* don't talk to other macvlans */
 	MACVLAN_MODE_VEPA    = 2, /* talk to other ports through ext bridge */
 	MACVLAN_MODE_BRIDGE  = 4, /* talk to bridge ports directly */
+	MACVLAN_MODE_PASSTHRU = 8,/* take over the underlying device */
 };
 
 /* SR-IOV virtual function management section */
diff --git a/include/linux/if_macvlan.h b/include/linux/if_macvlan.h
index 8a2fd66a8b5..e28b2e4959d 100644
--- a/include/linux/if_macvlan.h
+++ b/include/linux/if_macvlan.h
@@ -25,19 +25,25 @@ struct macvlan_port;
 struct macvtap_queue;
 
 /**
- *	struct macvlan_rx_stats - MACVLAN percpu rx stats
+ *	struct macvlan_pcpu_stats - MACVLAN percpu stats
  *	@rx_packets: number of received packets
  *	@rx_bytes: number of received bytes
  *	@rx_multicast: number of received multicast packets
+ *	@tx_packets: number of transmitted packets
+ *	@tx_bytes: number of transmitted bytes
  *	@syncp: synchronization point for 64bit counters
- *	@rx_errors: number of errors
+ *	@rx_errors: number of rx errors
+ *	@tx_dropped: number of tx dropped packets
  */
-struct macvlan_rx_stats {
+struct macvlan_pcpu_stats {
 	u64			rx_packets;
 	u64			rx_bytes;
 	u64			rx_multicast;
+	u64			tx_packets;
+	u64			tx_bytes;
 	struct u64_stats_sync	syncp;
-	unsigned long		rx_errors;
+	u32			rx_errors;
+	u32			tx_dropped;
 };
 
 /*
@@ -52,7 +58,7 @@ struct macvlan_dev {
 	struct hlist_node	hlist;
 	struct macvlan_port	*port;
 	struct net_device	*lowerdev;
-	struct macvlan_rx_stats __percpu *rx_stats;
+	struct macvlan_pcpu_stats __percpu *pcpu_stats;
 	enum macvlan_mode	mode;
 	int (*receive)(struct sk_buff *skb);
 	int (*forward)(struct net_device *dev, struct sk_buff *skb);
@@ -64,18 +70,18 @@ static inline void macvlan_count_rx(const struct macvlan_dev *vlan,
 				    unsigned int len, bool success,
 				    bool multicast)
 {
-	struct macvlan_rx_stats *rx_stats;
-
-	rx_stats = this_cpu_ptr(vlan->rx_stats);
 	if (likely(success)) {
-		u64_stats_update_begin(&rx_stats->syncp);
-		rx_stats->rx_packets++;;
-		rx_stats->rx_bytes += len;
+		struct macvlan_pcpu_stats *pcpu_stats;
+
+		pcpu_stats = this_cpu_ptr(vlan->pcpu_stats);
+		u64_stats_update_begin(&pcpu_stats->syncp);
+		pcpu_stats->rx_packets++;
+		pcpu_stats->rx_bytes += len;
 		if (multicast)
-			rx_stats->rx_multicast++;
-		u64_stats_update_end(&rx_stats->syncp);
+			pcpu_stats->rx_multicast++;
+		u64_stats_update_end(&pcpu_stats->syncp);
 	} else {
-		rx_stats->rx_errors++;
+		this_cpu_inc(vlan->pcpu_stats->rx_errors);
 	}
 }
 
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index c2f3a72712c..635e1faec41 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -339,6 +339,31 @@ static inline int vlan_get_tag(const struct sk_buff *skb, u16 *vlan_tci)
 	}
 }
 
+/**
+ * vlan_get_protocol - get protocol EtherType.
+ * @skb: skbuff to query
+ *
+ * Returns the EtherType of the packet, regardless of whether it is
+ * vlan encapsulated (normal or hardware accelerated) or not.
+ */
+static inline __be16 vlan_get_protocol(const struct sk_buff *skb)
+{
+	__be16 protocol = 0;
+
+	if (vlan_tx_tag_present(skb) ||
+	     skb->protocol != cpu_to_be16(ETH_P_8021Q))
+		protocol = skb->protocol;
+	else {
+		__be16 proto, *protop;
+		protop = skb_header_pointer(skb, offsetof(struct vlan_ethhdr,
+						h_vlan_encapsulated_proto),
+						sizeof(proto), &proto);
+		if (likely(protop))
+			protocol = *protop;
+	}
+
+	return protocol;
+}
 #endif /* __KERNEL__ */
 
 /* VLAN IOCTLs are found in sockios.h */
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index 93fc2449af1..74cfcff0148 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -85,9 +85,9 @@ struct igmpv3_query {
 #define IGMP_DVMRP			0x13	/* DVMRP routing */
 #define IGMP_PIM			0x14	/* PIM routing */
 #define IGMP_TRACE			0x15
-#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x11 */
+#define IGMPV2_HOST_MEMBERSHIP_REPORT	0x16	/* V2 version of 0x12 */
 #define IGMP_HOST_LEAVE_MESSAGE 	0x17
-#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x11 */
+#define IGMPV3_HOST_MEMBERSHIP_REPORT	0x22	/* V3 version of 0x12 */
 
 #define IGMP_MTRACE_RESP		0x1e
 #define IGMP_MTRACE			0x1f
@@ -167,10 +167,10 @@ struct ip_sf_socklist {
  */
 
 struct ip_mc_socklist {
-	struct ip_mc_socklist	*next;
+	struct ip_mc_socklist __rcu *next_rcu;
 	struct ip_mreqn		multi;
 	unsigned int		sfmode;		/* MCAST_{INCLUDE,EXCLUDE} */
-	struct ip_sf_socklist	*sflist;
+	struct ip_sf_socklist __rcu	*sflist;
 	struct rcu_head		rcu;
 };
 
@@ -186,11 +186,14 @@ struct ip_sf_list {
 struct ip_mc_list {
 	struct in_device	*interface;
 	__be32			multiaddr;
+	unsigned int		sfmode;
 	struct ip_sf_list	*sources;
 	struct ip_sf_list	*tomb;
-	unsigned int		sfmode;
 	unsigned long		sfcount[2];
-	struct ip_mc_list	*next;
+	union {
+		struct ip_mc_list *next;
+		struct ip_mc_list __rcu *next_rcu;
+	};
 	struct timer_list	timer;
 	int			users;
 	atomic_t		refcnt;
@@ -201,6 +204,7 @@ struct ip_mc_list {
 	char			loaded;
 	unsigned char		gsquery;	/* check source marks? */
 	unsigned char		crcount;
+	struct rcu_head		rcu;
 };
 
 /* V3 exponential field decoding */
@@ -234,7 +238,7 @@ extern void ip_mc_unmap(struct in_device *);
 extern void ip_mc_remap(struct in_device *);
 extern void ip_mc_dec_group(struct in_device *in_dev, __be32 addr);
 extern void ip_mc_inc_group(struct in_device *in_dev, __be32 addr);
-extern void ip_mc_rejoin_group(struct ip_mc_list *im);
+extern void ip_mc_rejoin_groups(struct in_device *in_dev);
 
 #endif
 #endif
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index ccd5b07d678..ae8fdc54e0c 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -41,10 +41,12 @@ enum
 	__IPV4_DEVCONF_MAX
 };
 
+#define IPV4_DEVCONF_MAX (__IPV4_DEVCONF_MAX - 1)
+
 struct ipv4_devconf {
 	void	*sysctl;
-	int	data[__IPV4_DEVCONF_MAX - 1];
-	DECLARE_BITMAP(state, __IPV4_DEVCONF_MAX - 1);
+	int	data[IPV4_DEVCONF_MAX];
+	DECLARE_BITMAP(state, IPV4_DEVCONF_MAX);
 };
 
 struct in_device {
@@ -52,9 +54,8 @@ struct in_device {
 	atomic_t		refcnt;
 	int			dead;
 	struct in_ifaddr	*ifa_list;	/* IP ifaddr chain		*/
-	rwlock_t		mc_list_lock;
-	struct ip_mc_list	*mc_list;	/* IP multicast filter chain    */
-	int			mc_count;	          /* Number of installed mcasts	*/
+	struct ip_mc_list __rcu	*mc_list;	/* IP multicast filter chain    */
+	int			mc_count;	/* Number of installed mcasts	*/
 	spinlock_t		mc_tomb_lock;
 	struct ip_mc_list	*mc_tomb;
 	unsigned long		mr_v1_seen;
@@ -91,7 +92,7 @@ static inline void ipv4_devconf_set(struct in_device *in_dev, int index,
 
 static inline void ipv4_devconf_setall(struct in_device *in_dev)
 {
-	bitmap_fill(in_dev->cnf.state, __IPV4_DEVCONF_MAX - 1);
+	bitmap_fill(in_dev->cnf.state, IPV4_DEVCONF_MAX);
 }
 
 #define IN_DEV_CONF_GET(in_dev, attr) \
@@ -221,7 +222,7 @@ static inline struct in_device *in_dev_get(const struct net_device *dev)
 
 static inline struct in_device *__in_dev_get_rtnl(const struct net_device *dev)
 {
-	return rcu_dereference_check(dev->ip_ptr, lockdep_rtnl_is_held());
+	return rtnl_dereference(dev->ip_ptr);
 }
 
 extern void in_dev_finish_destroy(struct in_device *idev);
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index 1f8c06ce0fa..caa151fbebb 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -12,6 +12,13 @@
 #include <linux/securebits.h>
 #include <net/net_namespace.h>
 
+#ifdef CONFIG_SMP
+# define INIT_PUSHABLE_TASKS(tsk)					\
+	.pushable_tasks = PLIST_NODE_INIT(tsk.pushable_tasks, MAX_PRIO),
+#else
+# define INIT_PUSHABLE_TASKS(tsk)
+#endif
+
 extern struct files_struct init_files;
 extern struct fs_struct init_fs;
 
@@ -83,6 +90,12 @@ extern struct group_info init_groups;
  */
 # define CAP_INIT_BSET  CAP_FULL_SET
 
+#ifdef CONFIG_RCU_BOOST
+#define INIT_TASK_RCU_BOOST()						\
+	.rcu_boost_mutex = NULL,
+#else
+#define INIT_TASK_RCU_BOOST()
+#endif
 #ifdef CONFIG_TREE_PREEMPT_RCU
 #define INIT_TASK_RCU_TREE_PREEMPT()					\
 	.rcu_blocked_node = NULL,
@@ -94,7 +107,8 @@ extern struct group_info init_groups;
 	.rcu_read_lock_nesting = 0,					\
 	.rcu_read_unlock_special = 0,					\
 	.rcu_node_entry = LIST_HEAD_INIT(tsk.rcu_node_entry),		\
-	INIT_TASK_RCU_TREE_PREEMPT()
+	INIT_TASK_RCU_TREE_PREEMPT()					\
+	INIT_TASK_RCU_BOOST()
 #else
 #define INIT_TASK_RCU_PREEMPT(tsk)
 #endif
@@ -137,7 +151,7 @@ extern struct cred init_cred;
 		.nr_cpus_allowed = NR_CPUS,				\
 	},								\
 	.tasks		= LIST_HEAD_INIT(tsk.tasks),			\
-	.pushable_tasks = PLIST_NODE_INIT(tsk.pushable_tasks, MAX_PRIO), \
+	INIT_PUSHABLE_TASKS(tsk)					\
 	.ptraced	= LIST_HEAD_INIT(tsk.ptraced),			\
 	.ptrace_entry	= LIST_HEAD_INIT(tsk.ptrace_entry),		\
 	.real_parent	= &tsk,						\
diff --git a/include/linux/input.h b/include/linux/input.h
index 51af441f3a2..c4e9d91ec97 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -47,6 +47,25 @@ struct input_id {
 	__u16 version;
 };
 
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ *	the event stream.
+ * @flat: values that are within this value will be discarded by
+ *	joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ *	the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
 struct input_absinfo {
 	__s32 value;
 	__s32 minimum;
@@ -85,12 +104,15 @@ struct input_keymap_entry {
 #define EVIOCGREP		_IOR('E', 0x03, unsigned int[2])	/* get repeat settings */
 #define EVIOCSREP		_IOW('E', 0x03, unsigned int[2])	/* set repeat settings */
 
-#define EVIOCGKEYCODE		_IOR('E', 0x04, struct input_keymap_entry)	/* get keycode */
-#define EVIOCSKEYCODE		_IOW('E', 0x04, struct input_keymap_entry)	/* set keycode */
+#define EVIOCGKEYCODE		_IOR('E', 0x04, unsigned int[2])        /* get keycode */
+#define EVIOCGKEYCODE_V2	_IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE		_IOW('E', 0x04, unsigned int[2])        /* set keycode */
+#define EVIOCSKEYCODE_V2	_IOW('E', 0x04, struct input_keymap_entry)
 
 #define EVIOCGNAME(len)		_IOC(_IOC_READ, 'E', 0x06, len)		/* get device name */
 #define EVIOCGPHYS(len)		_IOC(_IOC_READ, 'E', 0x07, len)		/* get physical location */
 #define EVIOCGUNIQ(len)		_IOC(_IOC_READ, 'E', 0x08, len)		/* get unique identifier */
+#define EVIOCGPROP(len)		_IOC(_IOC_READ, 'E', 0x09, len)		/* get device properties */
 
 #define EVIOCGKEY(len)		_IOC(_IOC_READ, 'E', 0x18, len)		/* get global key state */
 #define EVIOCGLED(len)		_IOC(_IOC_READ, 'E', 0x19, len)		/* get all LEDs */
@@ -108,6 +130,18 @@ struct input_keymap_entry {
 #define EVIOCGRAB		_IOW('E', 0x90, int)			/* Grab/Release device */
 
 /*
+ * Device properties and quirks
+ */
+
+#define INPUT_PROP_POINTER		0x00	/* needs a pointer */
+#define INPUT_PROP_DIRECT		0x01	/* direct input devices */
+#define INPUT_PROP_BUTTONPAD		0x02	/* has button(s) under pad */
+#define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
+
+#define INPUT_PROP_MAX			0x1f
+#define INPUT_PROP_CNT			(INPUT_PROP_MAX + 1)
+
+/*
  * Event types
  */
 
@@ -569,6 +603,8 @@ struct input_keymap_entry {
 #define KEY_FRAMEFORWARD	0x1b5
 #define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
 #define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
+#define KEY_10CHANNELSUP        0x1b8   /* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN      0x1b9   /* 10 channels down (10-) */
 
 #define KEY_DEL_EOL		0x1c0
 #define KEY_DEL_EOS		0x1c1
@@ -624,6 +660,10 @@ struct input_keymap_entry {
 #define KEY_CAMERA_FOCUS	0x210
 #define KEY_WPS_BUTTON		0x211	/* WiFi Protected Setup key */
 
+#define KEY_TOUCHPAD_TOGGLE	0x212	/* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON		0x213
+#define KEY_TOUCHPAD_OFF	0x214
+
 #define BTN_TRIGGER_HAPPY		0x2c0
 #define BTN_TRIGGER_HAPPY1		0x2c0
 #define BTN_TRIGGER_HAPPY2		0x2c1
@@ -733,11 +773,12 @@ struct input_keymap_entry {
 #define ABS_MT_BLOB_ID		0x38	/* Group a set of packets as a blob */
 #define ABS_MT_TRACKING_ID	0x39	/* Unique ID of initiated contact */
 #define ABS_MT_PRESSURE		0x3a	/* Pressure on contact area */
+#define ABS_MT_DISTANCE		0x3b	/* Contact hover distance */
 
 #ifdef __KERNEL__
 /* Implementation details, userspace should not care about these */
 #define ABS_MT_FIRST		ABS_MT_TOUCH_MAJOR
-#define ABS_MT_LAST		ABS_MT_PRESSURE
+#define ABS_MT_LAST		ABS_MT_DISTANCE
 #endif
 
 #define ABS_MAX			0x3f
@@ -848,6 +889,7 @@ struct input_keymap_entry {
  */
 #define MT_TOOL_FINGER		0
 #define MT_TOOL_PEN		1
+#define MT_TOOL_MAX		1
 
 /*
  * Values describing the status of a force-feedback effect
@@ -1083,19 +1125,12 @@ struct ff_effect {
 #include <linux/mod_devicetable.h>
 
 /**
- * struct input_mt_slot - represents the state of an input MT slot
- * @abs: holds current values of ABS_MT axes for this slot
- */
-struct input_mt_slot {
-	int abs[ABS_MT_LAST - ABS_MT_FIRST + 1];
-};
-
-/**
  * struct input_dev - represents an input device
  * @name: name of the device
  * @phys: physical path to the device in the system hierarchy
  * @uniq: unique identification code for the device (if device has it)
  * @id: id of the device (struct input_id)
+ * @propbit: bitmap of device properties and quirks
  * @evbit: bitmap of types of events supported by the device (EV_KEY,
  *	EV_REL, etc.)
  * @keybit: bitmap of keys/buttons this device has
@@ -1130,7 +1165,8 @@ struct input_mt_slot {
  *	of tracked contacts
  * @mtsize: number of MT slots the device uses
  * @slot: MT slot currently being transmitted
- * @absinfo: array of &struct absinfo elements holding information
+ * @trkid: stores MT tracking ID for the current contact
+ * @absinfo: array of &struct input_absinfo elements holding information
  *	about absolute axes (current value, min, max, flat, fuzz,
  *	resolution)
  * @key: reflects current state of device's keys/buttons
@@ -1178,6 +1214,8 @@ struct input_dev {
 	const char *uniq;
 	struct input_id id;
 
+	unsigned long propbit[BITS_TO_LONGS(INPUT_PROP_CNT)];
+
 	unsigned long evbit[BITS_TO_LONGS(EV_CNT)];
 	unsigned long keybit[BITS_TO_LONGS(KEY_CNT)];
 	unsigned long relbit[BITS_TO_LONGS(REL_CNT)];
@@ -1214,6 +1252,7 @@ struct input_dev {
 	struct input_mt_slot *mt;
 	int mtsize;
 	int slot;
+	int trkid;
 
 	struct input_absinfo *absinfo;
 
@@ -1406,6 +1445,8 @@ static inline void input_set_drvdata(struct input_dev *dev, void *data)
 int __must_check input_register_device(struct input_dev *);
 void input_unregister_device(struct input_dev *);
 
+void input_reset_device(struct input_dev *);
+
 int __must_check input_register_handler(struct input_handler *);
 void input_unregister_handler(struct input_handler *);
 
@@ -1421,7 +1462,7 @@ void input_release_device(struct input_handle *);
 int input_open_device(struct input_handle *);
 void input_close_device(struct input_handle *);
 
-int input_flush_device(struct input_handle* handle, struct file* file);
+int input_flush_device(struct input_handle *handle, struct file *file);
 
 void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value);
 void input_inject_event(struct input_handle *handle, unsigned int type, unsigned int code, int value);
@@ -1461,11 +1502,6 @@ static inline void input_mt_sync(struct input_dev *dev)
 	input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
 }
 
-static inline void input_mt_slot(struct input_dev *dev, int slot)
-{
-	input_event(dev, EV_ABS, ABS_MT_SLOT, slot);
-}
-
 void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
 
 /**
@@ -1578,8 +1614,5 @@ int input_ff_erase(struct input_dev *dev, int effect_id, struct file *file);
 int input_ff_create_memless(struct input_dev *dev, void *data,
 		int (*play_effect)(struct input_dev *, void *, struct ff_effect *));
 
-int input_mt_create_slots(struct input_dev *dev, unsigned int num_slots);
-void input_mt_destroy_slots(struct input_dev *dev);
-
 #endif
 #endif
diff --git a/include/linux/input/cma3000.h b/include/linux/input/cma3000.h
new file mode 100644
index 00000000000..cbbaac27d31
--- /dev/null
+++ b/include/linux/input/cma3000.h
@@ -0,0 +1,59 @@
+/*
+ * VTI CMA3000_Dxx Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _LINUX_CMA3000_H
+#define _LINUX_CMA3000_H
+
+#define CMAMODE_DEFAULT    0
+#define CMAMODE_MEAS100    1
+#define CMAMODE_MEAS400    2
+#define CMAMODE_MEAS40     3
+#define CMAMODE_MOTDET     4
+#define CMAMODE_FF100      5
+#define CMAMODE_FF400      6
+#define CMAMODE_POFF       7
+
+#define CMARANGE_2G   2000
+#define CMARANGE_8G   8000
+
+/**
+ * struct cma3000_i2c_platform_data - CMA3000 Platform data
+ * @fuzz_x: Noise on X Axis
+ * @fuzz_y: Noise on Y Axis
+ * @fuzz_z: Noise on Z Axis
+ * @g_range: G range in milli g i.e 2000 or 8000
+ * @mode: Operating mode
+ * @mdthr: Motion detect threshold value
+ * @mdfftmr: Motion detect and free fall time value
+ * @ffthr: Free fall threshold value
+ */
+
+struct cma3000_platform_data {
+	int fuzz_x;
+	int fuzz_y;
+	int fuzz_z;
+	int g_range;
+	uint8_t mode;
+	uint8_t mdthr;
+	uint8_t mdfftmr;
+	uint8_t ffthr;
+	unsigned long irqflags;
+};
+
+#endif
diff --git a/include/linux/input/matrix_keypad.h b/include/linux/input/matrix_keypad.h
index 80352ad6581..69747469174 100644
--- a/include/linux/input/matrix_keypad.h
+++ b/include/linux/input/matrix_keypad.h
@@ -9,7 +9,7 @@
 
 #define KEY(row, col, val)	((((row) & (MATRIX_MAX_ROWS - 1)) << 24) |\
 				 (((col) & (MATRIX_MAX_COLS - 1)) << 16) |\
-				 (val & 0xffff))
+				 ((val) & 0xffff))
 
 #define KEY_ROW(k)		(((k) >> 24) & 0xff)
 #define KEY_COL(k)		(((k) >> 16) & 0xff)
diff --git a/include/linux/input/mt.h b/include/linux/input/mt.h
new file mode 100644
index 00000000000..b3ac06a4435
--- /dev/null
+++ b/include/linux/input/mt.h
@@ -0,0 +1,57 @@
+#ifndef _INPUT_MT_H
+#define _INPUT_MT_H
+
+/*
+ * Input Multitouch Library
+ *
+ * Copyright (c) 2010 Henrik Rydberg
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+
+#define TRKID_MAX	0xffff
+
+/**
+ * struct input_mt_slot - represents the state of an input MT slot
+ * @abs: holds current values of ABS_MT axes for this slot
+ */
+struct input_mt_slot {
+	int abs[ABS_MT_LAST - ABS_MT_FIRST + 1];
+};
+
+static inline void input_mt_set_value(struct input_mt_slot *slot,
+				      unsigned code, int value)
+{
+	slot->abs[code - ABS_MT_FIRST] = value;
+}
+
+static inline int input_mt_get_value(const struct input_mt_slot *slot,
+				     unsigned code)
+{
+	return slot->abs[code - ABS_MT_FIRST];
+}
+
+int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots);
+void input_mt_destroy_slots(struct input_dev *dev);
+
+static inline int input_mt_new_trkid(struct input_dev *dev)
+{
+	return dev->trkid++ & TRKID_MAX;
+}
+
+static inline void input_mt_slot(struct input_dev *dev, int slot)
+{
+	input_event(dev, EV_ABS, ABS_MT_SLOT, slot);
+}
+
+void input_mt_report_slot_state(struct input_dev *dev,
+				unsigned int tool_type, bool active);
+
+void input_mt_report_finger_count(struct input_dev *dev, int count);
+void input_mt_report_pointer_emulation(struct input_dev *dev, bool use_count);
+
+#endif
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 79d0c4f6d07..55e0d4253e4 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -114,15 +114,15 @@ typedef irqreturn_t (*irq_handler_t)(int, void *);
 struct irqaction {
 	irq_handler_t handler;
 	unsigned long flags;
-	const char *name;
 	void *dev_id;
 	struct irqaction *next;
 	int irq;
-	struct proc_dir_entry *dir;
 	irq_handler_t thread_fn;
 	struct task_struct *thread;
 	unsigned long thread_flags;
-};
+	const char *name;
+	struct proc_dir_entry *dir;
+} ____cacheline_internodealigned_in_smp;
 
 extern irqreturn_t no_action(int cpl, void *dev_id);
 
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index 3e70b21884a..b2eee896dcb 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -76,7 +76,6 @@ int put_io_context(struct io_context *ioc);
 void exit_io_context(struct task_struct *task);
 struct io_context *get_io_context(gfp_t gfp_flags, int node);
 struct io_context *alloc_io_context(gfp_t gfp_flags, int node);
-void copy_io_context(struct io_context **pdst, struct io_context **psrc);
 #else
 static inline void exit_io_context(struct task_struct *task)
 {
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index d377ea815d4..e9bb22cba76 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -112,7 +112,6 @@ struct resource_list {
 /* PC/ISA/whatever - the normal PC address spaces: IO and memory */
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern int resource_alloc_from_bottom;
 
 extern struct resource *request_resource_conflict(struct resource *root, struct resource *new);
 extern int request_resource(struct resource *root, struct resource *new);
@@ -124,6 +123,7 @@ extern void reserve_region_with_split(struct resource *root,
 extern struct resource *insert_resource_conflict(struct resource *parent, struct resource *new);
 extern int insert_resource(struct resource *parent, struct resource *new);
 extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
+extern void arch_remove_reservations(struct resource *avail);
 extern int allocate_resource(struct resource *root, struct resource *new,
 			     resource_size_t size, resource_size_t min,
 			     resource_size_t max, resource_size_t align,
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 8e429d0e040..0c997767429 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -364,7 +364,7 @@ struct ipv6_pinfo {
 
 	__u32			dst_cookie;
 
-	struct ipv6_mc_socklist	*ipv6_mc_list;
+	struct ipv6_mc_socklist	__rcu *ipv6_mc_list;
 	struct ipv6_ac_socklist	*ipv6_ac_list;
 	struct ipv6_fl_socklist *ipv6_fl_list;
 
diff --git a/include/linux/jhash.h b/include/linux/jhash.h
index ced1159fa4f..47cb09edec1 100644
--- a/include/linux/jhash.h
+++ b/include/linux/jhash.h
@@ -3,129 +3,156 @@
 
 /* jhash.h: Jenkins hash support.
  *
- * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
+ * Copyright (C) 2006. Bob Jenkins (bob_jenkins@burtleburtle.net)
  *
  * http://burtleburtle.net/bob/hash/
  *
  * These are the credits from Bob's sources:
  *
- * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
- * hash(), hash2(), hash3, and mix() are externally useful functions.
- * Routines to test the hash are included if SELF_TEST is defined.
- * You can use this free for any purpose.  It has no warranty.
+ * lookup3.c, by Bob Jenkins, May 2006, Public Domain.
  *
- * Copyright (C) 2003 David S. Miller (davem@redhat.com)
+ * These are functions for producing 32-bit hashes for hash table lookup.
+ * hashword(), hashlittle(), hashlittle2(), hashbig(), mix(), and final()
+ * are externally useful functions.  Routines to test the hash are included
+ * if SELF_TEST is defined.  You can use this free for any purpose.  It's in
+ * the public domain.  It has no warranty.
+ *
+ * Copyright (C) 2009-2010 Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
  *
  * I've modified Bob's hash to be useful in the Linux kernel, and
- * any bugs present are surely my fault.  -DaveM
+ * any bugs present are my fault.
+ * Jozsef
  */
+#include <linux/bitops.h>
+#include <linux/unaligned/packed_struct.h>
+
+/* Best hash sizes are of power of two */
+#define jhash_size(n)   ((u32)1<<(n))
+/* Mask the hash value, i.e (value & jhash_mask(n)) instead of (value % n) */
+#define jhash_mask(n)   (jhash_size(n)-1)
+
+/* __jhash_mix -- mix 3 32-bit values reversibly. */
+#define __jhash_mix(a, b, c)			\
+{						\
+	a -= c;  a ^= rol32(c, 4);  c += b;	\
+	b -= a;  b ^= rol32(a, 6);  a += c;	\
+	c -= b;  c ^= rol32(b, 8);  b += a;	\
+	a -= c;  a ^= rol32(c, 16); c += b;	\
+	b -= a;  b ^= rol32(a, 19); a += c;	\
+	c -= b;  c ^= rol32(b, 4);  b += a;	\
+}
 
-/* NOTE: Arguments are modified. */
-#define __jhash_mix(a, b, c) \
-{ \
-  a -= b; a -= c; a ^= (c>>13); \
-  b -= c; b -= a; b ^= (a<<8); \
-  c -= a; c -= b; c ^= (b>>13); \
-  a -= b; a -= c; a ^= (c>>12);  \
-  b -= c; b -= a; b ^= (a<<16); \
-  c -= a; c -= b; c ^= (b>>5); \
-  a -= b; a -= c; a ^= (c>>3);  \
-  b -= c; b -= a; b ^= (a<<10); \
-  c -= a; c -= b; c ^= (b>>15); \
+/* __jhash_final - final mixing of 3 32-bit values (a,b,c) into c */
+#define __jhash_final(a, b, c)			\
+{						\
+	c ^= b; c -= rol32(b, 14);		\
+	a ^= c; a -= rol32(c, 11);		\
+	b ^= a; b -= rol32(a, 25);		\
+	c ^= b; c -= rol32(b, 16);		\
+	a ^= c; a -= rol32(c, 4);		\
+	b ^= a; b -= rol32(a, 14);		\
+	c ^= b; c -= rol32(b, 24);		\
 }
 
-/* The golden ration: an arbitrary value */
-#define JHASH_GOLDEN_RATIO	0x9e3779b9
+/* An arbitrary initial parameter */
+#define JHASH_INITVAL		0xdeadbeef
 
-/* The most generic version, hashes an arbitrary sequence
- * of bytes.  No alignment or length assumptions are made about
- * the input key.
+/* jhash - hash an arbitrary key
+ * @k: sequence of bytes as key
+ * @length: the length of the key
+ * @initval: the previous hash, or an arbitray value
+ *
+ * The generic version, hashes an arbitrary sequence of bytes.
+ * No alignment or length assumptions are made about the input key.
+ *
+ * Returns the hash value of the key. The result depends on endianness.
  */
 static inline u32 jhash(const void *key, u32 length, u32 initval)
 {
-	u32 a, b, c, len;
+	u32 a, b, c;
 	const u8 *k = key;
 
-	len = length;
-	a = b = JHASH_GOLDEN_RATIO;
-	c = initval;
-
-	while (len >= 12) {
-		a += (k[0] +((u32)k[1]<<8) +((u32)k[2]<<16) +((u32)k[3]<<24));
-		b += (k[4] +((u32)k[5]<<8) +((u32)k[6]<<16) +((u32)k[7]<<24));
-		c += (k[8] +((u32)k[9]<<8) +((u32)k[10]<<16)+((u32)k[11]<<24));
-
-		__jhash_mix(a,b,c);
+	/* Set up the internal state */
+	a = b = c = JHASH_INITVAL + length + initval;
 
+	/* All but the last block: affect some 32 bits of (a,b,c) */
+	while (length > 12) {
+		a += __get_unaligned_cpu32(k);
+		b += __get_unaligned_cpu32(k + 4);
+		c += __get_unaligned_cpu32(k + 8);
+		__jhash_mix(a, b, c);
+		length -= 12;
 		k += 12;
-		len -= 12;
 	}
-
-	c += length;
-	switch (len) {
-	case 11: c += ((u32)k[10]<<24);
-	case 10: c += ((u32)k[9]<<16);
-	case 9 : c += ((u32)k[8]<<8);
-	case 8 : b += ((u32)k[7]<<24);
-	case 7 : b += ((u32)k[6]<<16);
-	case 6 : b += ((u32)k[5]<<8);
-	case 5 : b += k[4];
-	case 4 : a += ((u32)k[3]<<24);
-	case 3 : a += ((u32)k[2]<<16);
-	case 2 : a += ((u32)k[1]<<8);
-	case 1 : a += k[0];
-	};
-
-	__jhash_mix(a,b,c);
+	/* Last block: affect all 32 bits of (c) */
+	/* All the case statements fall through */
+	switch (length) {
+	case 12: c += (u32)k[11]<<24;
+	case 11: c += (u32)k[10]<<16;
+	case 10: c += (u32)k[9]<<8;
+	case 9:  c += k[8];
+	case 8:  b += (u32)k[7]<<24;
+	case 7:  b += (u32)k[6]<<16;
+	case 6:  b += (u32)k[5]<<8;
+	case 5:  b += k[4];
+	case 4:  a += (u32)k[3]<<24;
+	case 3:  a += (u32)k[2]<<16;
+	case 2:  a += (u32)k[1]<<8;
+	case 1:  a += k[0];
+		 __jhash_final(a, b, c);
+	case 0: /* Nothing left to add */
+		break;
+	}
 
 	return c;
 }
 
-/* A special optimized version that handles 1 or more of u32s.
- * The length parameter here is the number of u32s in the key.
+/* jhash2 - hash an array of u32's
+ * @k: the key which must be an array of u32's
+ * @length: the number of u32's in the key
+ * @initval: the previous hash, or an arbitray value
+ *
+ * Returns the hash value of the key.
  */
 static inline u32 jhash2(const u32 *k, u32 length, u32 initval)
 {
-	u32 a, b, c, len;
+	u32 a, b, c;
 
-	a = b = JHASH_GOLDEN_RATIO;
-	c = initval;
-	len = length;
+	/* Set up the internal state */
+	a = b = c = JHASH_INITVAL + (length<<2) + initval;
 
-	while (len >= 3) {
+	/* Handle most of the key */
+	while (length > 3) {
 		a += k[0];
 		b += k[1];
 		c += k[2];
 		__jhash_mix(a, b, c);
-		k += 3; len -= 3;
+		length -= 3;
+		k += 3;
 	}
 
-	c += length * 4;
-
-	switch (len) {
-	case 2 : b += k[1];
-	case 1 : a += k[0];
-	};
-
-	__jhash_mix(a,b,c);
+	/* Handle the last 3 u32's: all the case statements fall through */
+	switch (length) {
+	case 3: c += k[2];
+	case 2: b += k[1];
+	case 1: a += k[0];
+		__jhash_final(a, b, c);
+	case 0:	/* Nothing left to add */
+		break;
+	}
 
 	return c;
 }
 
 
-/* A special ultra-optimized versions that knows they are hashing exactly
- * 3, 2 or 1 word(s).
- *
- * NOTE: In particular the "c += length; __jhash_mix(a,b,c);" normally
- *       done at the end is not done here.
- */
+/* jhash_3words - hash exactly 3, 2 or 1 word(s) */
 static inline u32 jhash_3words(u32 a, u32 b, u32 c, u32 initval)
 {
-	a += JHASH_GOLDEN_RATIO;
-	b += JHASH_GOLDEN_RATIO;
+	a += JHASH_INITVAL;
+	b += JHASH_INITVAL;
 	c += initval;
 
-	__jhash_mix(a, b, c);
+	__jhash_final(a, b, c);
 
 	return c;
 }
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 450092c1e35..b6de9a6f701 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -17,13 +17,11 @@
 #include <linux/bitops.h>
 #include <linux/log2.h>
 #include <linux/typecheck.h>
+#include <linux/printk.h>
 #include <linux/dynamic_debug.h>
 #include <asm/byteorder.h>
 #include <asm/bug.h>
 
-extern const char linux_banner[];
-extern const char linux_proc_banner[];
-
 #define USHRT_MAX	((u16)(~0U))
 #define SHRT_MAX	((s16)(USHRT_MAX>>1))
 #define SHRT_MIN	((s16)(-SHRT_MAX - 1))
@@ -60,7 +58,7 @@ extern const char linux_proc_banner[];
 #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
 #define roundup(x, y) (					\
 {							\
-	typeof(y) __y = y;				\
+	const typeof(y) __y = y;			\
 	(((x) + (__y - 1)) / __y) * __y;		\
 }							\
 )
@@ -110,31 +108,6 @@ extern const char linux_proc_banner[];
  */
 #define lower_32_bits(n) ((u32)(n))
 
-#define	KERN_EMERG	"<0>"	/* system is unusable			*/
-#define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
-#define	KERN_CRIT	"<2>"	/* critical conditions			*/
-#define	KERN_ERR	"<3>"	/* error conditions			*/
-#define	KERN_WARNING	"<4>"	/* warning conditions			*/
-#define	KERN_NOTICE	"<5>"	/* normal but significant condition	*/
-#define	KERN_INFO	"<6>"	/* informational			*/
-#define	KERN_DEBUG	"<7>"	/* debug-level messages			*/
-
-/* Use the default kernel loglevel */
-#define KERN_DEFAULT	"<d>"
-/*
- * Annotation for a "continued" line of log printout (only done after a
- * line that had no enclosing \n). Only to be used by core/arch code
- * during early bootup (a continued line is not SMP-safe otherwise).
- */
-#define	KERN_CONT	"<c>"
-
-extern int console_printk[];
-
-#define console_loglevel (console_printk[0])
-#define default_message_loglevel (console_printk[1])
-#define minimum_console_loglevel (console_printk[2])
-#define default_console_loglevel (console_printk[3])
-
 struct completion;
 struct pt_regs;
 struct user;
@@ -187,11 +160,6 @@ static inline void might_fault(void)
 }
 #endif
 
-struct va_format {
-	const char *fmt;
-	va_list *va;
-};
-
 extern struct atomic_notifier_head panic_notifier_list;
 extern long (*panic_blink)(int state);
 NORET_TYPE void panic(const char * fmt, ...)
@@ -245,114 +213,8 @@ extern int func_ptr_is_kernel_text(void *ptr);
 struct pid;
 extern struct pid *session_of_pgrp(struct pid *pgrp);
 
-/*
- * FW_BUG
- * Add this to a message where you are sure the firmware is buggy or behaves
- * really stupid or out of spec. Be aware that the responsible BIOS developer
- * should be able to fix this issue or at least get a concrete idea of the
- * problem by reading your message without the need of looking at the kernel
- * code.
- * 
- * Use it for definite and high priority BIOS bugs.
- *
- * FW_WARN
- * Use it for not that clear (e.g. could the kernel messed up things already?)
- * and medium priority BIOS bugs.
- *
- * FW_INFO
- * Use this one if you want to tell the user or vendor about something
- * suspicious, but generally harmless related to the firmware.
- *
- * Use it for information or very low priority BIOS bugs.
- */
-#define FW_BUG		"[Firmware Bug]: "
-#define FW_WARN		"[Firmware Warn]: "
-#define FW_INFO		"[Firmware Info]: "
-
-/*
- * HW_ERR
- * Add this to a message for hardware errors, so that user can report
- * it to hardware vendor instead of LKML or software vendor.
- */
-#define HW_ERR		"[Hardware Error]: "
-
-#ifdef CONFIG_PRINTK
-asmlinkage int vprintk(const char *fmt, va_list args)
-	__attribute__ ((format (printf, 1, 0)));
-asmlinkage int printk(const char * fmt, ...)
-	__attribute__ ((format (printf, 1, 2))) __cold;
-
-/*
- * Please don't use printk_ratelimit(), because it shares ratelimiting state
- * with all other unrelated printk_ratelimit() callsites.  Instead use
- * printk_ratelimited() or plain old __ratelimit().
- */
-extern int __printk_ratelimit(const char *func);
-#define printk_ratelimit() __printk_ratelimit(__func__)
-extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
-				   unsigned int interval_msec);
-
-extern int printk_delay_msec;
-
-/*
- * Print a one-time message (analogous to WARN_ONCE() et al):
- */
-#define printk_once(x...) ({			\
-	static bool __print_once;		\
-						\
-	if (!__print_once) {			\
-		__print_once = true;		\
-		printk(x);			\
-	}					\
-})
-
-void log_buf_kexec_setup(void);
-#else
-static inline int vprintk(const char *s, va_list args)
-	__attribute__ ((format (printf, 1, 0)));
-static inline int vprintk(const char *s, va_list args) { return 0; }
-static inline int printk(const char *s, ...)
-	__attribute__ ((format (printf, 1, 2)));
-static inline int __cold printk(const char *s, ...) { return 0; }
-static inline int printk_ratelimit(void) { return 0; }
-static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
-					  unsigned int interval_msec)	\
-		{ return false; }
-
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_once(x...) printk(x)
-
-static inline void log_buf_kexec_setup(void)
-{
-}
-#endif
-
-/*
- * Dummy printk for disabled debugging statements to use whilst maintaining
- * gcc's format and side-effect checking.
- */
-static inline __attribute__ ((format (printf, 1, 2)))
-int no_printk(const char *s, ...) { return 0; }
-
-extern int printk_needs_cpu(int cpu);
-extern void printk_tick(void);
-
-extern void asmlinkage __attribute__((format(printf, 1, 2)))
-	early_printk(const char *fmt, ...);
-
 unsigned long int_sqrt(unsigned long);
 
-static inline void console_silent(void)
-{
-	console_loglevel = 0;
-}
-
-static inline void console_verbose(void)
-{
-	if (console_loglevel)
-		console_loglevel = 15;
-}
-
 extern void bust_spinlocks(int yes);
 extern void wake_up_klogd(void);
 extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in progress */
@@ -389,22 +251,6 @@ extern enum system_states {
 #define TAINT_CRAP			10
 #define TAINT_FIRMWARE_WORKAROUND	11
 
-extern void dump_stack(void) __cold;
-
-enum {
-	DUMP_PREFIX_NONE,
-	DUMP_PREFIX_ADDRESS,
-	DUMP_PREFIX_OFFSET
-};
-extern void hex_dump_to_buffer(const void *buf, size_t len,
-				int rowsize, int groupsize,
-				char *linebuf, size_t linebuflen, bool ascii);
-extern void print_hex_dump(const char *level, const char *prefix_str,
-				int prefix_type, int rowsize, int groupsize,
-				const void *buf, size_t len, bool ascii);
-extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
-			const void *buf, size_t len);
-
 extern const char hex_asc[];
 #define hex_asc_lo(x)	hex_asc[((x) & 0x0f)]
 #define hex_asc_hi(x)	hex_asc[((x) & 0xf0) >> 4]
@@ -418,94 +264,6 @@ static inline char *pack_hex_byte(char *buf, u8 byte)
 
 extern int hex_to_bin(char ch);
 
-#ifndef pr_fmt
-#define pr_fmt(fmt) fmt
-#endif
-
-#define pr_emerg(fmt, ...) \
-        printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert(fmt, ...) \
-        printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit(fmt, ...) \
-        printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err(fmt, ...) \
-        printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning(fmt, ...) \
-        printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn pr_warning
-#define pr_notice(fmt, ...) \
-        printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info(fmt, ...) \
-        printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_cont(fmt, ...) \
-	printk(KERN_CONT fmt, ##__VA_ARGS__)
-
-/* pr_devel() should produce zero code unless DEBUG is defined */
-#ifdef DEBUG
-#define pr_devel(fmt, ...) \
-	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_devel(fmt, ...) \
-	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug(fmt, ...) \
-	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
-/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
-#define pr_debug(fmt, ...) \
-	dynamic_pr_debug(fmt, ##__VA_ARGS__)
-#else
-#define pr_debug(fmt, ...) \
-	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
-#endif
-
-/*
- * ratelimited messages with local ratelimit_state,
- * no local ratelimit_state used in the !PRINTK case
- */
-#ifdef CONFIG_PRINTK
-#define printk_ratelimited(fmt, ...)  ({				\
-	static DEFINE_RATELIMIT_STATE(_rs,				\
-				      DEFAULT_RATELIMIT_INTERVAL,	\
-				      DEFAULT_RATELIMIT_BURST);		\
-									\
-	if (__ratelimit(&_rs))						\
-		printk(fmt, ##__VA_ARGS__);				\
-})
-#else
-/* No effect, but we still get type checking even in the !PRINTK case: */
-#define printk_ratelimited printk
-#endif
-
-#define pr_emerg_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_alert_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_crit_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_err_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warning_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_warn_ratelimited pr_warning_ratelimited
-#define pr_notice_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
-#define pr_info_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
-/* no pr_cont_ratelimited, don't do that... */
-/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug_ratelimited(fmt, ...) \
-	printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#else
-#define pr_debug_ratelimited(fmt, ...) \
-	({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
-				     ##__VA_ARGS__); 0; })
-#endif
-
 /*
  * General tracing related utility functions - trace_printk(),
  * tracing_on/tracing_off and tracing_start()/tracing_stop
diff --git a/include/linux/kernel_stat.h b/include/linux/kernel_stat.h
index ad54c846911..44e83ba12b5 100644
--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -47,7 +47,7 @@ extern unsigned long long nr_context_switches(void);
 
 #ifndef CONFIG_GENERIC_HARDIRQS
 #define kstat_irqs_this_cpu(irq) \
-	(kstat_this_cpu.irqs[irq])
+	(this_cpu_read(kstat.irqs[irq])
 
 struct irq_desc;
 
diff --git a/include/linux/kprobes.h b/include/linux/kprobes.h
index e7d1b2e0070..dd7c12e875b 100644
--- a/include/linux/kprobes.h
+++ b/include/linux/kprobes.h
@@ -275,7 +275,9 @@ extern int arch_prepared_optinsn(struct arch_optimized_insn *optinsn);
 extern int arch_check_optimized_kprobe(struct optimized_kprobe *op);
 extern int arch_prepare_optimized_kprobe(struct optimized_kprobe *op);
 extern void arch_remove_optimized_kprobe(struct optimized_kprobe *op);
-extern int  arch_optimize_kprobe(struct optimized_kprobe *op);
+extern void arch_optimize_kprobes(struct list_head *oplist);
+extern void arch_unoptimize_kprobes(struct list_head *oplist,
+				    struct list_head *done_list);
 extern void arch_unoptimize_kprobe(struct optimized_kprobe *op);
 extern kprobe_opcode_t *get_optinsn_slot(void);
 extern void free_optinsn_slot(kprobe_opcode_t *slot, int dirty);
@@ -303,12 +305,12 @@ struct hlist_head * kretprobe_inst_table_head(struct task_struct *tsk);
 /* kprobe_running() will just return the current_kprobe on this CPU */
 static inline struct kprobe *kprobe_running(void)
 {
-	return (__get_cpu_var(current_kprobe));
+	return (__this_cpu_read(current_kprobe));
 }
 
 static inline void reset_current_kprobe(void)
 {
-	__get_cpu_var(current_kprobe) = NULL;
+	__this_cpu_write(current_kprobe, NULL);
 }
 
 static inline struct kprobe_ctlblk *get_kprobe_ctlblk(void)
diff --git a/include/linux/kthread.h b/include/linux/kthread.h
index 685ea65eb80..ce0775aa64c 100644
--- a/include/linux/kthread.h
+++ b/include/linux/kthread.h
@@ -81,16 +81,41 @@ struct kthread_work {
 #define DEFINE_KTHREAD_WORK(work, fn)					\
 	struct kthread_work work = KTHREAD_WORK_INIT(work, fn)
 
-static inline void init_kthread_worker(struct kthread_worker *worker)
-{
-	*worker = (struct kthread_worker)KTHREAD_WORKER_INIT(*worker);
-}
-
-static inline void init_kthread_work(struct kthread_work *work,
-				     kthread_work_func_t fn)
-{
-	*work = (struct kthread_work)KTHREAD_WORK_INIT(*work, fn);
-}
+/*
+ * kthread_worker.lock and kthread_work.done need their own lockdep class
+ * keys if they are defined on stack with lockdep enabled.  Use the
+ * following macros when defining them on stack.
+ */
+#ifdef CONFIG_LOCKDEP
+# define KTHREAD_WORKER_INIT_ONSTACK(worker)				\
+	({ init_kthread_worker(&worker); worker; })
+# define DEFINE_KTHREAD_WORKER_ONSTACK(worker)				\
+	struct kthread_worker worker = KTHREAD_WORKER_INIT_ONSTACK(worker)
+# define KTHREAD_WORK_INIT_ONSTACK(work, fn)				\
+	({ init_kthread_work((&work), fn); work; })
+# define DEFINE_KTHREAD_WORK_ONSTACK(work, fn)				\
+	struct kthread_work work = KTHREAD_WORK_INIT_ONSTACK(work, fn)
+#else
+# define DEFINE_KTHREAD_WORKER_ONSTACK(worker) DEFINE_KTHREAD_WORKER(worker)
+# define DEFINE_KTHREAD_WORK_ONSTACK(work, fn) DEFINE_KTHREAD_WORK(work, fn)
+#endif
+
+extern void __init_kthread_worker(struct kthread_worker *worker,
+			const char *name, struct lock_class_key *key);
+
+#define init_kthread_worker(worker)					\
+	do {								\
+		static struct lock_class_key __key;			\
+		__init_kthread_worker((worker), "("#worker")->lock", &__key); \
+	} while (0)
+
+#define init_kthread_work(work, fn)					\
+	do {								\
+		memset((work), 0, sizeof(struct kthread_work));		\
+		INIT_LIST_HEAD(&(work)->node);				\
+		(work)->func = (fn);					\
+		init_waitqueue_head(&(work)->done);			\
+	} while (0)
 
 int kthread_worker_fn(void *worker_ptr);
 
diff --git a/include/linux/leds-lp5521.h b/include/linux/leds-lp5521.h
new file mode 100644
index 00000000000..38368d785f0
--- /dev/null
+++ b/include/linux/leds-lp5521.h
@@ -0,0 +1,47 @@
+/*
+ * LP5521 LED chip driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5521_H
+#define __LINUX_LP5521_H
+
+/* See Documentation/leds/leds-lp5521.txt */
+
+struct lp5521_led_config {
+	u8		chan_nr;
+	u8		led_current; /* mA x10, 0 if led is not connected */
+	u8		max_current;
+};
+
+#define LP5521_CLOCK_AUTO	0
+#define LP5521_CLOCK_INT	1
+#define LP5521_CLOCK_EXT	2
+
+struct lp5521_platform_data {
+	struct lp5521_led_config *led_config;
+	u8	num_channels;
+	u8	clock_mode;
+	int	(*setup_resources)(void);
+	void	(*release_resources)(void);
+	void	(*enable)(bool state);
+};
+
+#endif /* __LINUX_LP5521_H */
diff --git a/include/linux/leds-lp5523.h b/include/linux/leds-lp5523.h
new file mode 100644
index 00000000000..796747637b8
--- /dev/null
+++ b/include/linux/leds-lp5523.h
@@ -0,0 +1,47 @@
+/*
+ * LP5523 LED Driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Contact: Samu Onkalo <samu.p.onkalo@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_LP5523_H
+#define __LINUX_LP5523_H
+
+/* See Documentation/leds/leds-lp5523.txt */
+
+struct lp5523_led_config {
+	u8		chan_nr;
+	u8		led_current; /* mA x10, 0 if led is not connected */
+	u8		max_current;
+};
+
+#define LP5523_CLOCK_AUTO	0
+#define LP5523_CLOCK_INT	1
+#define LP5523_CLOCK_EXT	2
+
+struct lp5523_platform_data {
+	struct lp5523_led_config *led_config;
+	u8	num_channels;
+	u8	clock_mode;
+	int	(*setup_resources)(void);
+	void	(*release_resources)(void);
+	void	(*enable)(bool state);
+};
+
+#endif /* __LINUX_LP5523_H */
diff --git a/include/linux/leds.h b/include/linux/leds.h
index ba6986a1166..0f19df9e37b 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/rwsem.h>
+#include <linux/timer.h>
 
 struct device;
 /*
@@ -45,10 +46,14 @@ struct led_classdev {
 	/* Get LED brightness level */
 	enum led_brightness (*brightness_get)(struct led_classdev *led_cdev);
 
-	/* Activate hardware accelerated blink, delays are in
-	 * miliseconds and if none is provided then a sensible default
-	 * should be chosen. The call can adjust the timings if it can't
-	 * match the values specified exactly. */
+	/*
+	 * Activate hardware accelerated blink, delays are in milliseconds
+	 * and if both are zero then a sensible default should be chosen.
+	 * The call should adjust the timings in that case and if it can't
+	 * match the values specified exactly.
+	 * Deactivate blinking again when the brightness is set to a fixed
+	 * value via the brightness_set() callback.
+	 */
 	int		(*blink_set)(struct led_classdev *led_cdev,
 				     unsigned long *delay_on,
 				     unsigned long *delay_off);
@@ -57,6 +62,10 @@ struct led_classdev {
 	struct list_head	 node;			/* LED Device list */
 	const char		*default_trigger;	/* Trigger to use */
 
+	unsigned long		 blink_delay_on, blink_delay_off;
+	struct timer_list	 blink_timer;
+	int			 blink_brightness;
+
 #ifdef CONFIG_LEDS_TRIGGERS
 	/* Protects the trigger data below */
 	struct rw_semaphore	 trigger_lock;
@@ -73,6 +82,36 @@ extern void led_classdev_unregister(struct led_classdev *led_cdev);
 extern void led_classdev_suspend(struct led_classdev *led_cdev);
 extern void led_classdev_resume(struct led_classdev *led_cdev);
 
+/**
+ * led_blink_set - set blinking with software fallback
+ * @led_cdev: the LED to start blinking
+ * @delay_on: the time it should be on (in ms)
+ * @delay_off: the time it should ble off (in ms)
+ *
+ * This function makes the LED blink, attempting to use the
+ * hardware acceleration if possible, but falling back to
+ * software blinking if there is no hardware blinking or if
+ * the LED refuses the passed values.
+ *
+ * Note that if software blinking is active, simply calling
+ * led_cdev->brightness_set() will not stop the blinking,
+ * use led_classdev_brightness_set() instead.
+ */
+extern void led_blink_set(struct led_classdev *led_cdev,
+			  unsigned long *delay_on,
+			  unsigned long *delay_off);
+/**
+ * led_brightness_set - set LED brightness
+ * @led_cdev: the LED to set
+ * @brightness: the brightness to set it to
+ *
+ * Set an LED's brightness, and, if necessary, cancel the
+ * software blink timer that implements blinking when the
+ * hardware doesn't.
+ */
+extern void led_brightness_set(struct led_classdev *led_cdev,
+			       enum led_brightness brightness);
+
 /*
  * LED Triggers
  */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 15b77b8dc7e..d947b123166 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -986,7 +986,7 @@ extern void ata_host_init(struct ata_host *, struct device *,
 			  unsigned long, struct ata_port_operations *);
 extern int ata_scsi_detect(struct scsi_host_template *sht);
 extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
-extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
+extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd);
 extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev,
 			    int cmd, void __user *arg);
 extern void ata_sas_port_destroy(struct ata_port *);
diff --git a/include/linux/list_bl.h b/include/linux/list_bl.h
new file mode 100644
index 00000000000..9ee97e7f2be
--- /dev/null
+++ b/include/linux/list_bl.h
@@ -0,0 +1,144 @@
+#ifndef _LINUX_LIST_BL_H
+#define _LINUX_LIST_BL_H
+
+#include <linux/list.h>
+
+/*
+ * Special version of lists, where head of the list has a lock in the lowest
+ * bit. This is useful for scalable hash tables without increasing memory
+ * footprint overhead.
+ *
+ * For modification operations, the 0 bit of hlist_bl_head->first
+ * pointer must be set.
+ *
+ * With some small modifications, this can easily be adapted to store several
+ * arbitrary bits (not just a single lock bit), if the need arises to store
+ * some fast and compact auxiliary data.
+ */
+
+#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
+#define LIST_BL_LOCKMASK	1UL
+#else
+#define LIST_BL_LOCKMASK	0UL
+#endif
+
+#ifdef CONFIG_DEBUG_LIST
+#define LIST_BL_BUG_ON(x) BUG_ON(x)
+#else
+#define LIST_BL_BUG_ON(x)
+#endif
+
+
+struct hlist_bl_head {
+	struct hlist_bl_node *first;
+};
+
+struct hlist_bl_node {
+	struct hlist_bl_node *next, **pprev;
+};
+#define INIT_HLIST_BL_HEAD(ptr) \
+	((ptr)->first = NULL)
+
+static inline void INIT_HLIST_BL_NODE(struct hlist_bl_node *h)
+{
+	h->next = NULL;
+	h->pprev = NULL;
+}
+
+#define hlist_bl_entry(ptr, type, member) container_of(ptr,type,member)
+
+static inline int hlist_bl_unhashed(const struct hlist_bl_node *h)
+{
+	return !h->pprev;
+}
+
+static inline struct hlist_bl_node *hlist_bl_first(struct hlist_bl_head *h)
+{
+	return (struct hlist_bl_node *)
+		((unsigned long)h->first & ~LIST_BL_LOCKMASK);
+}
+
+static inline void hlist_bl_set_first(struct hlist_bl_head *h,
+					struct hlist_bl_node *n)
+{
+	LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK);
+	LIST_BL_BUG_ON(!((unsigned long)h->first & LIST_BL_LOCKMASK));
+	h->first = (struct hlist_bl_node *)((unsigned long)n | LIST_BL_LOCKMASK);
+}
+
+static inline int hlist_bl_empty(const struct hlist_bl_head *h)
+{
+	return !((unsigned long)h->first & ~LIST_BL_LOCKMASK);
+}
+
+static inline void hlist_bl_add_head(struct hlist_bl_node *n,
+					struct hlist_bl_head *h)
+{
+	struct hlist_bl_node *first = hlist_bl_first(h);
+
+	n->next = first;
+	if (first)
+		first->pprev = &n->next;
+	n->pprev = &h->first;
+	hlist_bl_set_first(h, n);
+}
+
+static inline void __hlist_bl_del(struct hlist_bl_node *n)
+{
+	struct hlist_bl_node *next = n->next;
+	struct hlist_bl_node **pprev = n->pprev;
+
+	LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK);
+
+	/* pprev may be `first`, so be careful not to lose the lock bit */
+	*pprev = (struct hlist_bl_node *)
+			((unsigned long)next |
+			 ((unsigned long)*pprev & LIST_BL_LOCKMASK));
+	if (next)
+		next->pprev = pprev;
+}
+
+static inline void hlist_bl_del(struct hlist_bl_node *n)
+{
+	__hlist_bl_del(n);
+	n->next = LIST_POISON1;
+	n->pprev = LIST_POISON2;
+}
+
+static inline void hlist_bl_del_init(struct hlist_bl_node *n)
+{
+	if (!hlist_bl_unhashed(n)) {
+		__hlist_bl_del(n);
+		INIT_HLIST_BL_NODE(n);
+	}
+}
+
+/**
+ * hlist_bl_for_each_entry	- iterate over list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ *
+ */
+#define hlist_bl_for_each_entry(tpos, pos, head, member)		\
+	for (pos = hlist_bl_first(head);				\
+	     pos &&							\
+		({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = pos->next)
+
+/**
+ * hlist_bl_for_each_entry_safe - iterate over list of given type safe against removal of list entry
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_node to use as a loop cursor.
+ * @n:		another &struct hlist_node to use as temporary storage
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_node within the struct.
+ */
+#define hlist_bl_for_each_entry_safe(tpos, pos, n, head, member)	 \
+	for (pos = hlist_bl_first(head);				 \
+	     pos && ({ n = pos->next; 1; }) && 				 \
+		({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1;}); \
+	     pos = n)
+
+#endif
diff --git a/include/linux/lockd/lockd.h b/include/linux/lockd/lockd.h
index a34dea46b62..2dee05e5119 100644
--- a/include/linux/lockd/lockd.h
+++ b/include/linux/lockd/lockd.h
@@ -43,6 +43,7 @@ struct nlm_host {
 	struct sockaddr_storage	h_addr;		/* peer address */
 	size_t			h_addrlen;
 	struct sockaddr_storage	h_srcaddr;	/* our address (optional) */
+	size_t			h_srcaddrlen;
 	struct rpc_clnt		*h_rpcclnt;	/* RPC client to talk to peer */
 	char			*h_name;		/* remote hostname */
 	u32			h_version;	/* interface version */
diff --git a/include/linux/marvell_phy.h b/include/linux/marvell_phy.h
index 1ff81b51b65..dd3c34ebca9 100644
--- a/include/linux/marvell_phy.h
+++ b/include/linux/marvell_phy.h
@@ -11,6 +11,7 @@
 #define MARVELL_PHY_ID_88E1118		0x01410e10
 #define MARVELL_PHY_ID_88E1121R		0x01410cb0
 #define MARVELL_PHY_ID_88E1145		0x01410cd0
+#define MARVELL_PHY_ID_88E1149R		0x01410e50
 #define MARVELL_PHY_ID_88E1240		0x01410e30
 #define MARVELL_PHY_ID_88E1318S		0x01410e90
 
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index c779b49a1fd..b1494aced21 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -55,6 +55,7 @@
 #define MDIO_PCS_10GBRT_STAT2	33	/* 10GBASE-R/-T PCS status 2 */
 #define MDIO_AN_10GBT_CTRL	32	/* 10GBASE-T auto-negotiation control */
 #define MDIO_AN_10GBT_STAT	33	/* 10GBASE-T auto-negotiation status */
+#define MDIO_AN_EEE_ADV		60	/* EEE advertisement */
 
 /* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
 #define MDIO_PMA_LASI_RXCTRL	0x9000	/* RX_ALARM control */
@@ -235,6 +236,10 @@
 #define MDIO_AN_10GBT_STAT_MS		0x4000	/* Master/slave config */
 #define MDIO_AN_10GBT_STAT_MSFLT	0x8000	/* Master/slave config fault */
 
+/* AN EEE Advertisement register. */
+#define MDIO_AN_EEE_ADV_100TX		0x0002	/* Advertise 100TX EEE cap */
+#define MDIO_AN_EEE_ADV_1000T		0x0004	/* Advertise 1000T EEE cap */
+
 /* LASI RX_ALARM control/status registers. */
 #define MDIO_PMA_LASI_RX_PHYXSLFLT	0x0001	/* PHY XS RX local fault */
 #define MDIO_PMA_LASI_RX_PCSLFLT	0x0008	/* PCS RX local fault */
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 4307231bd22..31c237a00c4 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -161,6 +161,9 @@ extern void register_page_bootmem_info_node(struct pglist_data *pgdat);
 extern void put_page_bootmem(struct page *page);
 #endif
 
+void lock_memory_hotplug(void);
+void unlock_memory_hotplug(void);
+
 #else /* ! CONFIG_MEMORY_HOTPLUG */
 /*
  * Stub functions for when hotplug is off
@@ -192,6 +195,9 @@ static inline void register_page_bootmem_info_node(struct pglist_data *pgdat)
 {
 }
 
+static inline void lock_memory_hotplug(void) {}
+static inline void unlock_memory_hotplug(void) {}
+
 #endif /* ! CONFIG_MEMORY_HOTPLUG */
 
 #ifdef CONFIG_MEMORY_HOTREMOVE
diff --git a/include/linux/mfd/tc35892.h b/include/linux/mfd/tc35892.h
deleted file mode 100644
index eff3094ca84..00000000000
--- a/include/linux/mfd/tc35892.h
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License, version 2
- */
-
-#ifndef __LINUX_MFD_TC35892_H
-#define __LINUX_MFD_TC35892_H
-
-#include <linux/device.h>
-
-#define TC35892_RSTCTRL_IRQRST	(1 << 4)
-#define TC35892_RSTCTRL_TIMRST	(1 << 3)
-#define TC35892_RSTCTRL_ROTRST	(1 << 2)
-#define TC35892_RSTCTRL_KBDRST	(1 << 1)
-#define TC35892_RSTCTRL_GPIRST	(1 << 0)
-
-#define TC35892_IRQST		0x91
-
-#define TC35892_MANFCODE_MAGIC	0x03
-#define TC35892_MANFCODE	0x80
-#define TC35892_VERSION		0x81
-#define TC35892_IOCFG		0xA7
-
-#define TC35892_CLKMODE		0x88
-#define TC35892_CLKCFG		0x89
-#define TC35892_CLKEN		0x8A
-
-#define TC35892_RSTCTRL		0x82
-#define TC35892_EXTRSTN		0x83
-#define TC35892_RSTINTCLR	0x84
-
-#define TC35892_GPIOIS0		0xC9
-#define TC35892_GPIOIS1		0xCA
-#define TC35892_GPIOIS2		0xCB
-#define TC35892_GPIOIBE0	0xCC
-#define TC35892_GPIOIBE1	0xCD
-#define TC35892_GPIOIBE2	0xCE
-#define TC35892_GPIOIEV0	0xCF
-#define TC35892_GPIOIEV1	0xD0
-#define TC35892_GPIOIEV2	0xD1
-#define TC35892_GPIOIE0		0xD2
-#define TC35892_GPIOIE1		0xD3
-#define TC35892_GPIOIE2		0xD4
-#define TC35892_GPIORIS0	0xD6
-#define TC35892_GPIORIS1	0xD7
-#define TC35892_GPIORIS2	0xD8
-#define TC35892_GPIOMIS0	0xD9
-#define TC35892_GPIOMIS1	0xDA
-#define TC35892_GPIOMIS2	0xDB
-#define TC35892_GPIOIC0		0xDC
-#define TC35892_GPIOIC1		0xDD
-#define TC35892_GPIOIC2		0xDE
-
-#define TC35892_GPIODATA0	0xC0
-#define TC35892_GPIOMASK0	0xc1
-#define TC35892_GPIODATA1	0xC2
-#define TC35892_GPIOMASK1	0xc3
-#define TC35892_GPIODATA2	0xC4
-#define TC35892_GPIOMASK2	0xC5
-
-#define TC35892_GPIODIR0	0xC6
-#define TC35892_GPIODIR1	0xC7
-#define TC35892_GPIODIR2	0xC8
-
-#define TC35892_GPIOSYNC0	0xE6
-#define TC35892_GPIOSYNC1	0xE7
-#define TC35892_GPIOSYNC2	0xE8
-
-#define TC35892_GPIOWAKE0	0xE9
-#define TC35892_GPIOWAKE1	0xEA
-#define TC35892_GPIOWAKE2	0xEB
-
-#define TC35892_GPIOODM0	0xE0
-#define TC35892_GPIOODE0	0xE1
-#define TC35892_GPIOODM1	0xE2
-#define TC35892_GPIOODE1	0xE3
-#define TC35892_GPIOODM2	0xE4
-#define TC35892_GPIOODE2	0xE5
-
-#define TC35892_INT_GPIIRQ	0
-#define TC35892_INT_TI0IRQ	1
-#define TC35892_INT_TI1IRQ	2
-#define TC35892_INT_TI2IRQ	3
-#define TC35892_INT_ROTIRQ	5
-#define TC35892_INT_KBDIRQ	6
-#define TC35892_INT_PORIRQ	7
-
-#define TC35892_NR_INTERNAL_IRQS	8
-#define TC35892_INT_GPIO(x)	(TC35892_NR_INTERNAL_IRQS + (x))
-
-struct tc35892 {
-	struct mutex lock;
-	struct device *dev;
-	struct i2c_client *i2c;
-
-	int irq_base;
-	int num_gpio;
-	struct tc35892_platform_data *pdata;
-};
-
-extern int tc35892_reg_write(struct tc35892 *tc35892, u8 reg, u8 data);
-extern int tc35892_reg_read(struct tc35892 *tc35892, u8 reg);
-extern int tc35892_block_read(struct tc35892 *tc35892, u8 reg, u8 length,
-			      u8 *values);
-extern int tc35892_block_write(struct tc35892 *tc35892, u8 reg, u8 length,
-			       const u8 *values);
-extern int tc35892_set_bits(struct tc35892 *tc35892, u8 reg, u8 mask, u8 val);
-
-/**
- * struct tc35892_gpio_platform_data - TC35892 GPIO platform data
- * @gpio_base: first gpio number assigned to TC35892.  A maximum of
- *	       %TC35892_NR_GPIOS GPIOs will be allocated.
- * @setup: callback for board-specific initialization
- * @remove: callback for board-specific teardown
- */
-struct tc35892_gpio_platform_data {
-	int gpio_base;
-	void (*setup)(struct tc35892 *tc35892, unsigned gpio_base);
-	void (*remove)(struct tc35892 *tc35892, unsigned gpio_base);
-};
-
-/**
- * struct tc35892_platform_data - TC35892 platform data
- * @irq_base: base IRQ number.  %TC35892_NR_IRQS irqs will be used.
- * @gpio: GPIO-specific platform data
- */
-struct tc35892_platform_data {
-	int irq_base;
-	struct tc35892_gpio_platform_data *gpio;
-};
-
-#define TC35892_NR_GPIOS	24
-#define TC35892_NR_IRQS		TC35892_INT_GPIO(TC35892_NR_GPIOS)
-
-#endif
diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h
new file mode 100644
index 00000000000..16c76e124f9
--- /dev/null
+++ b/include/linux/mfd/tc3589x.h
@@ -0,0 +1,195 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ */
+
+#ifndef __LINUX_MFD_TC3589x_H
+#define __LINUX_MFD_TC3589x_H
+
+#include <linux/device.h>
+
+enum tx3589x_block {
+	TC3589x_BLOCK_GPIO        = 1 << 0,
+	TC3589x_BLOCK_KEYPAD      = 1 << 1,
+};
+
+#define TC3589x_RSTCTRL_IRQRST	(1 << 4)
+#define TC3589x_RSTCTRL_TIMRST	(1 << 3)
+#define TC3589x_RSTCTRL_ROTRST	(1 << 2)
+#define TC3589x_RSTCTRL_KBDRST	(1 << 1)
+#define TC3589x_RSTCTRL_GPIRST	(1 << 0)
+
+/* Keyboard Configuration Registers */
+#define TC3589x_KBDSETTLE_REG   0x01
+#define TC3589x_KBDBOUNCE       0x02
+#define TC3589x_KBDSIZE         0x03
+#define TC3589x_KBCFG_LSB       0x04
+#define TC3589x_KBCFG_MSB       0x05
+#define TC3589x_KBDIC           0x08
+#define TC3589x_KBDMSK          0x09
+#define TC3589x_EVTCODE_FIFO    0x10
+#define TC3589x_KBDMFS		0x8F
+
+#define TC3589x_IRQST		0x91
+
+#define TC3589x_MANFCODE_MAGIC	0x03
+#define TC3589x_MANFCODE	0x80
+#define TC3589x_VERSION		0x81
+#define TC3589x_IOCFG		0xA7
+
+#define TC3589x_CLKMODE		0x88
+#define TC3589x_CLKCFG		0x89
+#define TC3589x_CLKEN		0x8A
+
+#define TC3589x_RSTCTRL		0x82
+#define TC3589x_EXTRSTN		0x83
+#define TC3589x_RSTINTCLR	0x84
+
+/* Pull up/down configuration registers */
+#define TC3589x_IOCFG           0xA7
+#define TC3589x_IOPULLCFG0_LSB  0xAA
+#define TC3589x_IOPULLCFG0_MSB  0xAB
+#define TC3589x_IOPULLCFG1_LSB  0xAC
+#define TC3589x_IOPULLCFG1_MSB  0xAD
+#define TC3589x_IOPULLCFG2_LSB  0xAE
+
+#define TC3589x_GPIOIS0		0xC9
+#define TC3589x_GPIOIS1		0xCA
+#define TC3589x_GPIOIS2		0xCB
+#define TC3589x_GPIOIBE0	0xCC
+#define TC3589x_GPIOIBE1	0xCD
+#define TC3589x_GPIOIBE2	0xCE
+#define TC3589x_GPIOIEV0	0xCF
+#define TC3589x_GPIOIEV1	0xD0
+#define TC3589x_GPIOIEV2	0xD1
+#define TC3589x_GPIOIE0		0xD2
+#define TC3589x_GPIOIE1		0xD3
+#define TC3589x_GPIOIE2		0xD4
+#define TC3589x_GPIORIS0	0xD6
+#define TC3589x_GPIORIS1	0xD7
+#define TC3589x_GPIORIS2	0xD8
+#define TC3589x_GPIOMIS0	0xD9
+#define TC3589x_GPIOMIS1	0xDA
+#define TC3589x_GPIOMIS2	0xDB
+#define TC3589x_GPIOIC0		0xDC
+#define TC3589x_GPIOIC1		0xDD
+#define TC3589x_GPIOIC2		0xDE
+
+#define TC3589x_GPIODATA0	0xC0
+#define TC3589x_GPIOMASK0	0xc1
+#define TC3589x_GPIODATA1	0xC2
+#define TC3589x_GPIOMASK1	0xc3
+#define TC3589x_GPIODATA2	0xC4
+#define TC3589x_GPIOMASK2	0xC5
+
+#define TC3589x_GPIODIR0	0xC6
+#define TC3589x_GPIODIR1	0xC7
+#define TC3589x_GPIODIR2	0xC8
+
+#define TC3589x_GPIOSYNC0	0xE6
+#define TC3589x_GPIOSYNC1	0xE7
+#define TC3589x_GPIOSYNC2	0xE8
+
+#define TC3589x_GPIOWAKE0	0xE9
+#define TC3589x_GPIOWAKE1	0xEA
+#define TC3589x_GPIOWAKE2	0xEB
+
+#define TC3589x_GPIOODM0	0xE0
+#define TC3589x_GPIOODE0	0xE1
+#define TC3589x_GPIOODM1	0xE2
+#define TC3589x_GPIOODE1	0xE3
+#define TC3589x_GPIOODM2	0xE4
+#define TC3589x_GPIOODE2	0xE5
+
+#define TC3589x_INT_GPIIRQ	0
+#define TC3589x_INT_TI0IRQ	1
+#define TC3589x_INT_TI1IRQ	2
+#define TC3589x_INT_TI2IRQ	3
+#define TC3589x_INT_ROTIRQ	5
+#define TC3589x_INT_KBDIRQ	6
+#define TC3589x_INT_PORIRQ	7
+
+#define TC3589x_NR_INTERNAL_IRQS	8
+#define TC3589x_INT_GPIO(x)	(TC3589x_NR_INTERNAL_IRQS + (x))
+
+struct tc3589x {
+	struct mutex lock;
+	struct device *dev;
+	struct i2c_client *i2c;
+
+	int irq_base;
+	int num_gpio;
+	struct tc3589x_platform_data *pdata;
+};
+
+extern int tc3589x_reg_write(struct tc3589x *tc3589x, u8 reg, u8 data);
+extern int tc3589x_reg_read(struct tc3589x *tc3589x, u8 reg);
+extern int tc3589x_block_read(struct tc3589x *tc3589x, u8 reg, u8 length,
+			      u8 *values);
+extern int tc3589x_block_write(struct tc3589x *tc3589x, u8 reg, u8 length,
+			       const u8 *values);
+extern int tc3589x_set_bits(struct tc3589x *tc3589x, u8 reg, u8 mask, u8 val);
+
+/*
+ * Keypad related platform specific constants
+ * These values may be modified for fine tuning
+ */
+#define TC_KPD_ROWS             0x8
+#define TC_KPD_COLUMNS          0x8
+#define TC_KPD_DEBOUNCE_PERIOD  0xA3
+#define TC_KPD_SETTLE_TIME      0xA3
+
+/**
+ * struct tc35893_platform_data - data structure for platform specific data
+ * @keymap_data:        matrix scan code table for keycodes
+ * @krow:               mask for available rows, value is 0xFF
+ * @kcol:               mask for available columns, value is 0xFF
+ * @debounce_period:    platform specific debounce time
+ * @settle_time:        platform specific settle down time
+ * @irqtype:            type of interrupt, falling or rising edge
+ * @enable_wakeup:      specifies if keypad event can wake up system from sleep
+ * @no_autorepeat:      flag for auto repetition
+ */
+struct tc3589x_keypad_platform_data {
+	const struct matrix_keymap_data *keymap_data;
+	u8                      krow;
+	u8                      kcol;
+	u8                      debounce_period;
+	u8                      settle_time;
+	unsigned long           irqtype;
+	bool                    enable_wakeup;
+	bool                    no_autorepeat;
+};
+
+/**
+ * struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
+ * @gpio_base: first gpio number assigned to TC3589x.  A maximum of
+ *	       %TC3589x_NR_GPIOS GPIOs will be allocated.
+ * @setup: callback for board-specific initialization
+ * @remove: callback for board-specific teardown
+ */
+struct tc3589x_gpio_platform_data {
+	int gpio_base;
+	void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base);
+	void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base);
+};
+
+/**
+ * struct tc3589x_platform_data - TC3589x platform data
+ * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
+ * @irq_base: base IRQ number.  %TC3589x_NR_IRQS irqs will be used.
+ * @gpio: GPIO-specific platform data
+ * @keypad: keypad-specific platform data
+ */
+struct tc3589x_platform_data {
+	unsigned int block;
+	int irq_base;
+	struct tc3589x_gpio_platform_data *gpio;
+	const struct tc3589x_keypad_platform_data *keypad;
+};
+
+#define TC3589x_NR_GPIOS	24
+#define TC3589x_NR_IRQS		TC3589x_INT_GPIO(TC3589x_NR_GPIOS)
+
+#endif
diff --git a/include/linux/mfd/wl1273-core.h b/include/linux/mfd/wl1273-core.h
new file mode 100644
index 00000000000..9787293eae5
--- /dev/null
+++ b/include/linux/mfd/wl1273-core.h
@@ -0,0 +1,288 @@
+/*
+ * include/linux/mfd/wl1273-core.h
+ *
+ * Some definitions for the wl1273 radio receiver/transmitter chip.
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Author: Matti J. Aaltonen <matti.j.aaltonen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef WL1273_CORE_H
+#define WL1273_CORE_H
+
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+
+#define WL1273_FM_DRIVER_NAME	"wl1273-fm"
+#define RX71_FM_I2C_ADDR	0x22
+
+#define WL1273_STEREO_GET		0
+#define WL1273_RSSI_LVL_GET		1
+#define WL1273_IF_COUNT_GET		2
+#define WL1273_FLAG_GET			3
+#define WL1273_RDS_SYNC_GET		4
+#define WL1273_RDS_DATA_GET		5
+#define WL1273_FREQ_SET			10
+#define WL1273_AF_FREQ_SET		11
+#define WL1273_MOST_MODE_SET		12
+#define WL1273_MOST_BLEND_SET		13
+#define WL1273_DEMPH_MODE_SET		14
+#define WL1273_SEARCH_LVL_SET		15
+#define WL1273_BAND_SET			16
+#define WL1273_MUTE_STATUS_SET		17
+#define WL1273_RDS_PAUSE_LVL_SET	18
+#define WL1273_RDS_PAUSE_DUR_SET	19
+#define WL1273_RDS_MEM_SET		20
+#define WL1273_RDS_BLK_B_SET		21
+#define WL1273_RDS_MSK_B_SET		22
+#define WL1273_RDS_PI_MASK_SET		23
+#define WL1273_RDS_PI_SET		24
+#define WL1273_RDS_SYSTEM_SET		25
+#define WL1273_INT_MASK_SET		26
+#define WL1273_SEARCH_DIR_SET		27
+#define WL1273_VOLUME_SET		28
+#define WL1273_AUDIO_ENABLE		29
+#define WL1273_PCM_MODE_SET		30
+#define WL1273_I2S_MODE_CONFIG_SET	31
+#define WL1273_POWER_SET		32
+#define WL1273_INTX_CONFIG_SET		33
+#define WL1273_PULL_EN_SET		34
+#define WL1273_HILO_SET			35
+#define WL1273_SWITCH2FREF		36
+#define WL1273_FREQ_DRIFT_REPORT	37
+
+#define WL1273_PCE_GET			40
+#define WL1273_FIRM_VER_GET		41
+#define WL1273_ASIC_VER_GET		42
+#define WL1273_ASIC_ID_GET		43
+#define WL1273_MAN_ID_GET		44
+#define WL1273_TUNER_MODE_SET		45
+#define WL1273_STOP_SEARCH		46
+#define WL1273_RDS_CNTRL_SET		47
+
+#define WL1273_WRITE_HARDWARE_REG	100
+#define WL1273_CODE_DOWNLOAD		101
+#define WL1273_RESET			102
+
+#define WL1273_FM_POWER_MODE		254
+#define WL1273_FM_INTERRUPT		255
+
+/* Transmitter API */
+
+#define WL1273_CHANL_SET			55
+#define WL1273_SCAN_SPACING_SET			56
+#define WL1273_REF_SET				57
+#define WL1273_POWER_ENB_SET			90
+#define WL1273_POWER_ATT_SET			58
+#define WL1273_POWER_LEV_SET			59
+#define WL1273_AUDIO_DEV_SET			60
+#define WL1273_PILOT_DEV_SET			61
+#define WL1273_RDS_DEV_SET			62
+#define WL1273_PUPD_SET				91
+#define WL1273_AUDIO_IO_SET			63
+#define WL1273_PREMPH_SET			64
+#define WL1273_MONO_SET				66
+#define WL1273_MUTE				92
+#define WL1273_MPX_LMT_ENABLE			67
+#define WL1273_PI_SET				93
+#define WL1273_ECC_SET				69
+#define WL1273_PTY				70
+#define WL1273_AF				71
+#define WL1273_DISPLAY_MODE			74
+#define WL1273_RDS_REP_SET			77
+#define WL1273_RDS_CONFIG_DATA_SET		98
+#define WL1273_RDS_DATA_SET			99
+#define WL1273_RDS_DATA_ENB			94
+#define WL1273_TA_SET				78
+#define WL1273_TP_SET				79
+#define WL1273_DI_SET				80
+#define WL1273_MS_SET				81
+#define WL1273_PS_SCROLL_SPEED			82
+#define WL1273_TX_AUDIO_LEVEL_TEST		96
+#define WL1273_TX_AUDIO_LEVEL_TEST_THRESHOLD	73
+#define WL1273_TX_AUDIO_INPUT_LEVEL_RANGE_SET	54
+#define WL1273_RX_ANTENNA_SELECT		87
+#define WL1273_I2C_DEV_ADDR_SET			86
+#define WL1273_REF_ERR_CALIB_PARAM_SET		88
+#define WL1273_REF_ERR_CALIB_PERIODICITY_SET	89
+#define WL1273_SOC_INT_TRIGGER			52
+#define WL1273_SOC_AUDIO_PATH_SET		83
+#define WL1273_SOC_PCMI_OVERRIDE		84
+#define WL1273_SOC_I2S_OVERRIDE			85
+#define WL1273_RSSI_BLOCK_SCAN_FREQ_SET		95
+#define WL1273_RSSI_BLOCK_SCAN_START		97
+#define WL1273_RSSI_BLOCK_SCAN_DATA_GET		5
+#define WL1273_READ_FMANT_TUNE_VALUE		104
+
+#define WL1273_RDS_OFF		0
+#define WL1273_RDS_ON		1
+#define WL1273_RDS_RESET	2
+
+#define WL1273_AUDIO_DIGITAL	0
+#define WL1273_AUDIO_ANALOG	1
+
+#define WL1273_MODE_RX		BIT(0)
+#define WL1273_MODE_TX		BIT(1)
+#define WL1273_MODE_OFF		BIT(2)
+#define WL1273_MODE_SUSPENDED	BIT(3)
+
+#define WL1273_RADIO_CHILD	BIT(0)
+#define WL1273_CODEC_CHILD	BIT(1)
+
+#define WL1273_RX_MONO		1
+#define WL1273_RX_STEREO	0
+#define WL1273_TX_MONO		0
+#define WL1273_TX_STEREO	1
+
+#define WL1273_MAX_VOLUME	0xffff
+#define WL1273_DEFAULT_VOLUME	0x78b8
+
+/* I2S protocol, left channel first, data width 16 bits */
+#define WL1273_PCM_DEF_MODE		0x00
+
+/* Rx */
+#define WL1273_AUDIO_ENABLE_I2S		BIT(0)
+#define WL1273_AUDIO_ENABLE_ANALOG	BIT(1)
+
+/* Tx */
+#define WL1273_AUDIO_IO_SET_ANALOG	0
+#define WL1273_AUDIO_IO_SET_I2S		1
+
+#define WL1273_PUPD_SET_OFF		0x00
+#define WL1273_PUPD_SET_ON		0x01
+#define WL1273_PUPD_SET_RETENTION	0x10
+
+/* I2S mode */
+#define WL1273_IS2_WIDTH_32	0x0
+#define WL1273_IS2_WIDTH_40	0x1
+#define WL1273_IS2_WIDTH_22_23	0x2
+#define WL1273_IS2_WIDTH_23_22	0x3
+#define WL1273_IS2_WIDTH_48	0x4
+#define WL1273_IS2_WIDTH_50	0x5
+#define WL1273_IS2_WIDTH_60	0x6
+#define WL1273_IS2_WIDTH_64	0x7
+#define WL1273_IS2_WIDTH_80	0x8
+#define WL1273_IS2_WIDTH_96	0x9
+#define WL1273_IS2_WIDTH_128	0xa
+#define WL1273_IS2_WIDTH	0xf
+
+#define WL1273_IS2_FORMAT_STD	(0x0 << 4)
+#define WL1273_IS2_FORMAT_LEFT	(0x1 << 4)
+#define WL1273_IS2_FORMAT_RIGHT	(0x2 << 4)
+#define WL1273_IS2_FORMAT_USER	(0x3 << 4)
+
+#define WL1273_IS2_MASTER	(0x0 << 6)
+#define WL1273_IS2_SLAVEW	(0x1 << 6)
+
+#define WL1273_IS2_TRI_AFTER_SENDING	(0x0 << 7)
+#define WL1273_IS2_TRI_ALWAYS_ACTIVE	(0x1 << 7)
+
+#define WL1273_IS2_SDOWS_RR	(0x0 << 8)
+#define WL1273_IS2_SDOWS_RF	(0x1 << 8)
+#define WL1273_IS2_SDOWS_FR	(0x2 << 8)
+#define WL1273_IS2_SDOWS_FF	(0x3 << 8)
+
+#define WL1273_IS2_TRI_OPT	(0x0 << 10)
+#define WL1273_IS2_TRI_ALWAYS	(0x1 << 10)
+
+#define WL1273_IS2_RATE_48K	(0x0 << 12)
+#define WL1273_IS2_RATE_44_1K	(0x1 << 12)
+#define WL1273_IS2_RATE_32K	(0x2 << 12)
+#define WL1273_IS2_RATE_22_05K	(0x4 << 12)
+#define WL1273_IS2_RATE_16K	(0x5 << 12)
+#define WL1273_IS2_RATE_12K	(0x8 << 12)
+#define WL1273_IS2_RATE_11_025	(0x9 << 12)
+#define WL1273_IS2_RATE_8K	(0xa << 12)
+#define WL1273_IS2_RATE		(0xf << 12)
+
+#define WL1273_I2S_DEF_MODE	(WL1273_IS2_WIDTH_32 | \
+				 WL1273_IS2_FORMAT_STD | \
+				 WL1273_IS2_MASTER | \
+				 WL1273_IS2_TRI_AFTER_SENDING | \
+				 WL1273_IS2_SDOWS_RR | \
+				 WL1273_IS2_TRI_OPT | \
+				 WL1273_IS2_RATE_48K)
+
+#define SCHAR_MIN (-128)
+#define SCHAR_MAX 127
+
+#define WL1273_FR_EVENT			BIT(0)
+#define WL1273_BL_EVENT			BIT(1)
+#define WL1273_RDS_EVENT		BIT(2)
+#define WL1273_BBLK_EVENT		BIT(3)
+#define WL1273_LSYNC_EVENT		BIT(4)
+#define WL1273_LEV_EVENT		BIT(5)
+#define WL1273_IFFR_EVENT		BIT(6)
+#define WL1273_PI_EVENT			BIT(7)
+#define WL1273_PD_EVENT			BIT(8)
+#define WL1273_STIC_EVENT		BIT(9)
+#define WL1273_MAL_EVENT		BIT(10)
+#define WL1273_POW_ENB_EVENT		BIT(11)
+#define WL1273_SCAN_OVER_EVENT		BIT(12)
+#define WL1273_ERROR_EVENT		BIT(13)
+
+#define TUNER_MODE_STOP_SEARCH		0
+#define TUNER_MODE_PRESET		1
+#define TUNER_MODE_AUTO_SEEK		2
+#define TUNER_MODE_AF			3
+#define TUNER_MODE_AUTO_SEEK_PI		4
+#define TUNER_MODE_AUTO_SEEK_BULK	5
+
+#define RDS_BLOCK_SIZE	3
+
+struct wl1273_fm_platform_data {
+	int (*request_resources) (struct i2c_client *client);
+	void (*free_resources) (void);
+	void (*enable) (void);
+	void (*disable) (void);
+
+	u8 forbidden_modes;
+	unsigned int children;
+};
+
+#define WL1273_FM_CORE_CELLS	2
+
+#define WL1273_BAND_OTHER	0
+#define WL1273_BAND_JAPAN	1
+
+#define WL1273_BAND_JAPAN_LOW	76000
+#define WL1273_BAND_JAPAN_HIGH	90000
+#define WL1273_BAND_OTHER_LOW	87500
+#define WL1273_BAND_OTHER_HIGH	108000
+
+#define WL1273_BAND_TX_LOW	76000
+#define WL1273_BAND_TX_HIGH	108000
+
+struct wl1273_core {
+	struct mfd_cell cells[WL1273_FM_CORE_CELLS];
+	struct wl1273_fm_platform_data *pdata;
+
+	unsigned int mode;
+	unsigned int i2s_mode;
+	unsigned int volume;
+	unsigned int audio_mode;
+	unsigned int channel_number;
+	struct mutex lock; /* for serializing fm radio operations */
+
+	struct i2c_client *client;
+
+	int (*write)(struct wl1273_core *core, u8, u16);
+	int (*set_audio)(struct wl1273_core *core, unsigned int);
+	int (*set_volume)(struct wl1273_core *core, unsigned int);
+};
+
+#endif	/* ifndef WL1273_CORE_H */
diff --git a/include/linux/mfd/wm8350/audio.h b/include/linux/mfd/wm8350/audio.h
index a95141eafce..bd581c6fa08 100644
--- a/include/linux/mfd/wm8350/audio.h
+++ b/include/linux/mfd/wm8350/audio.h
@@ -522,9 +522,6 @@
 #define WM8350_MCLK_SEL_PLL_32K			3
 #define WM8350_MCLK_SEL_MCLK			5
 
-#define WM8350_MCLK_DIR_OUT			0
-#define WM8350_MCLK_DIR_IN			1
-
 /* clock divider id's */
 #define WM8350_ADC_CLKDIV			0
 #define WM8350_DAC_CLKDIV			1
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index 5c51f367c06..add8a1b8bcf 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -29,7 +29,7 @@ struct wm8994_ldo_pdata {
 #define WM8994_CONFIGURE_GPIO 0x8000
 
 #define WM8994_DRC_REGS 5
-#define WM8994_EQ_REGS  19
+#define WM8994_EQ_REGS  20
 
 /**
  * DRC configurations are specified with a label and a set of register
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 6d87f68ce4b..30f6fad99a5 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -168,6 +168,7 @@ struct mmc_host {
 						/* DDR mode at 1.8V */
 #define MMC_CAP_1_2V_DDR	(1 << 12)	/* can support */
 						/* DDR mode at 1.2V */
+#define MMC_CAP_POWER_OFF_CARD	(1 << 13)	/* Can power off after boot */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
diff --git a/include/linux/mmc/sh_mmcif.h b/include/linux/mmc/sh_mmcif.h
index 5c99da1078a..44fc5348fd5 100644
--- a/include/linux/mmc/sh_mmcif.h
+++ b/include/linux/mmc/sh_mmcif.h
@@ -14,8 +14,9 @@
 #ifndef __SH_MMCIF_H__
 #define __SH_MMCIF_H__
 
-#include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/sh_dma.h>
 
 /*
  * MMCIF : CE_CLK_CTRL [19:16]
@@ -31,13 +32,19 @@
  * 1111 : Peripheral clock (sup_pclk set '1')
  */
 
+struct sh_mmcif_dma {
+	struct sh_dmae_slave chan_priv_tx;
+	struct sh_dmae_slave chan_priv_rx;
+};
+
 struct sh_mmcif_plat_data {
 	void (*set_pwr)(struct platform_device *pdev, int state);
 	void (*down_pwr)(struct platform_device *pdev);
 	int (*get_cd)(struct platform_device *pdef);
-	u8	sup_pclk;	/* 1 :SH7757, 0: SH7724/SH7372 */
-	unsigned long caps;
-	u32	ocr;
+	struct sh_mmcif_dma	*dma;
+	u8			sup_pclk;	/* 1 :SH7757, 0: SH7724/SH7372 */
+	unsigned long		caps;
+	u32			ocr;
 };
 
 #define MMCIF_CE_CMD_SET	0x00000000
@@ -59,6 +66,32 @@ struct sh_mmcif_plat_data {
 #define MMCIF_CE_HOST_STS2	0x0000004C
 #define MMCIF_CE_VERSION	0x0000007C
 
+/* CE_BUF_ACC */
+#define BUF_ACC_DMAWEN		(1 << 25)
+#define BUF_ACC_DMAREN		(1 << 24)
+#define BUF_ACC_BUSW_32		(0 << 17)
+#define BUF_ACC_BUSW_16		(1 << 17)
+#define BUF_ACC_ATYP		(1 << 16)
+
+/* CE_CLK_CTRL */
+#define CLK_ENABLE		(1 << 24) /* 1: output mmc clock */
+#define CLK_CLEAR		((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
+#define CLK_SUP_PCLK		((1 << 19) | (1 << 18) | (1 << 17) | (1 << 16))
+#define CLKDIV_4		(1<<16) /* mmc clock frequency.
+					 * n: bus clock/(2^(n+1)) */
+#define CLKDIV_256		(7<<16) /* mmc clock frequency. (see above) */
+#define SRSPTO_256		((1 << 13) | (0 << 12)) /* resp timeout */
+#define SRBSYTO_29		((1 << 11) | (1 << 10) |	\
+				 (1 << 9) | (1 << 8)) /* resp busy timeout */
+#define SRWDTO_29		((1 << 7) | (1 << 6) |		\
+				 (1 << 5) | (1 << 4)) /* read/write timeout */
+#define SCCSTO_29		((1 << 3) | (1 << 2) |		\
+				 (1 << 1) | (1 << 0)) /* ccs timeout */
+
+/* CE_VERSION */
+#define SOFT_RST_ON		(1 << 31)
+#define SOFT_RST_OFF		0
+
 static inline u32 sh_mmcif_readl(void __iomem *addr, int reg)
 {
 	return readl(addr + reg);
@@ -145,21 +178,20 @@ static inline int sh_mmcif_boot_do_read(void __iomem *base,
 
 static inline void sh_mmcif_boot_init(void __iomem *base)
 {
-	unsigned long tmp;
-
 	/* reset */
-	tmp = sh_mmcif_readl(base, MMCIF_CE_VERSION);
-	sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp | 0x80000000);
-	sh_mmcif_writel(base, MMCIF_CE_VERSION, tmp & ~0x80000000);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON);
+	sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF);
 
 	/* byte swap */
-	sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, 0x00010000);
+	sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP);
 
 	/* Set block size in MMCIF hardware */
 	sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS);
 
-	/* Enable the clock, set it to Bus clock/256 (about 325Khz)*/
-	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01072fff);
+	/* Enable the clock, set it to Bus clock/256 (about 325Khz). */
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
+			CLK_ENABLE | CLKDIV_256 | SRSPTO_256 |
+			SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
 
 	/* CMD0 */
 	sh_mmcif_boot_cmd(base, 0x00000040, 0);
@@ -184,7 +216,9 @@ static inline void sh_mmcif_boot_slurp(void __iomem *base,
 	unsigned long tmp;
 
 	/* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */
-	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, 0x01012fff);
+	sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL,
+			CLK_ENABLE | CLKDIV_4 | SRSPTO_256 |
+			SRBSYTO_29 | SRWDTO_29 | SCCSTO_29);
 
 	/* CMD9 - Get CSD */
 	sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000);
diff --git a/include/linux/module.h b/include/linux/module.h
index b29e7458b96..8b17fd8c790 100644
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -308,6 +308,9 @@ struct module
 	/* The size of the executable code in each section.  */
 	unsigned int init_text_size, core_text_size;
 
+	/* Size of RO sections of the module (text+rodata) */
+	unsigned int init_ro_size, core_ro_size;
+
 	/* Arch-specific module values */
 	struct mod_arch_specific arch;
 
@@ -517,7 +520,7 @@ static inline void __module_get(struct module *module)
 #define symbol_put_addr(p) do { } while(0)
 
 #endif /* CONFIG_MODULE_UNLOAD */
-int use_module(struct module *a, struct module *b);
+int ref_module(struct module *a, struct module *b);
 
 /* This is a #define so the string doesn't get put in every .o file */
 #define module_name(mod)			\
@@ -672,7 +675,6 @@ static inline int module_get_iter_tracepoints(struct tracepoint_iter *iter)
 {
 	return 0;
 }
-
 #endif /* CONFIG_MODULES */
 
 #ifdef CONFIG_SYSFS
@@ -687,6 +689,13 @@ extern int module_sysfs_initialized;
 
 #define __MODULE_STRING(x) __stringify(x)
 
+#ifdef CONFIG_DEBUG_SET_MODULE_RONX
+extern void set_all_modules_text_rw(void);
+extern void set_all_modules_text_ro(void);
+#else
+static inline void set_all_modules_text_rw(void) { }
+static inline void set_all_modules_text_ro(void) { }
+#endif
 
 #ifdef CONFIG_GENERIC_BUG
 void module_bug_finalize(const Elf_Ehdr *, const Elf_Shdr *,
diff --git a/include/linux/mount.h b/include/linux/mount.h
index 5e7a59408dd..1869ea24a73 100644
--- a/include/linux/mount.h
+++ b/include/linux/mount.h
@@ -13,6 +13,7 @@
 #include <linux/list.h>
 #include <linux/nodemask.h>
 #include <linux/spinlock.h>
+#include <linux/seqlock.h>
 #include <asm/atomic.h>
 
 struct super_block;
@@ -46,12 +47,24 @@ struct mnt_namespace;
 
 #define MNT_INTERNAL	0x4000
 
+struct mnt_pcp {
+	int mnt_count;
+	int mnt_writers;
+};
+
 struct vfsmount {
 	struct list_head mnt_hash;
 	struct vfsmount *mnt_parent;	/* fs we are mounted on */
 	struct dentry *mnt_mountpoint;	/* dentry of mountpoint */
 	struct dentry *mnt_root;	/* root of the mounted tree */
 	struct super_block *mnt_sb;	/* pointer to superblock */
+#ifdef CONFIG_SMP
+	struct mnt_pcp __percpu *mnt_pcp;
+	atomic_t mnt_longrefs;
+#else
+	int mnt_count;
+	int mnt_writers;
+#endif
 	struct list_head mnt_mounts;	/* list of children, anchored here */
 	struct list_head mnt_child;	/* and going through their mnt_child */
 	int mnt_flags;
@@ -70,57 +83,25 @@ struct vfsmount {
 	struct mnt_namespace *mnt_ns;	/* containing namespace */
 	int mnt_id;			/* mount identifier */
 	int mnt_group_id;		/* peer group identifier */
-	/*
-	 * We put mnt_count & mnt_expiry_mark at the end of struct vfsmount
-	 * to let these frequently modified fields in a separate cache line
-	 * (so that reads of mnt_flags wont ping-pong on SMP machines)
-	 */
-	atomic_t mnt_count;
 	int mnt_expiry_mark;		/* true if marked for expiry */
 	int mnt_pinned;
 	int mnt_ghosts;
-#ifdef CONFIG_SMP
-	int __percpu *mnt_writers;
-#else
-	int mnt_writers;
-#endif
 };
 
-static inline int *get_mnt_writers_ptr(struct vfsmount *mnt)
-{
-#ifdef CONFIG_SMP
-	return mnt->mnt_writers;
-#else
-	return &mnt->mnt_writers;
-#endif
-}
-
-static inline struct vfsmount *mntget(struct vfsmount *mnt)
-{
-	if (mnt)
-		atomic_inc(&mnt->mnt_count);
-	return mnt;
-}
-
 struct file; /* forward dec */
 
 extern int mnt_want_write(struct vfsmount *mnt);
 extern int mnt_want_write_file(struct file *file);
 extern int mnt_clone_write(struct vfsmount *mnt);
 extern void mnt_drop_write(struct vfsmount *mnt);
-extern void mntput_no_expire(struct vfsmount *mnt);
+extern void mntput(struct vfsmount *mnt);
+extern struct vfsmount *mntget(struct vfsmount *mnt);
+extern void mntput_long(struct vfsmount *mnt);
+extern struct vfsmount *mntget_long(struct vfsmount *mnt);
 extern void mnt_pin(struct vfsmount *mnt);
 extern void mnt_unpin(struct vfsmount *mnt);
 extern int __mnt_is_readonly(struct vfsmount *mnt);
 
-static inline void mntput(struct vfsmount *mnt)
-{
-	if (mnt) {
-		mnt->mnt_expiry_mark = 0;
-		mntput_no_expire(mnt);
-	}
-}
-
 extern struct vfsmount *do_kern_mount(const char *fstype, int flags,
 				      const char *name, void *data);
 
diff --git a/include/linux/mutex.h b/include/linux/mutex.h
index f363bc8fdc7..94b48bd40dd 100644
--- a/include/linux/mutex.h
+++ b/include/linux/mutex.h
@@ -160,4 +160,8 @@ extern int mutex_trylock(struct mutex *lock);
 extern void mutex_unlock(struct mutex *lock);
 extern int atomic_dec_and_mutex_lock(atomic_t *cnt, struct mutex *lock);
 
+#ifndef CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX
+#define arch_mutex_cpu_relax()	cpu_relax()
+#endif
+
 #endif
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 05b441d9364..18d06add0a4 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -19,7 +19,10 @@ struct nameidata {
 	struct path	path;
 	struct qstr	last;
 	struct path	root;
+	struct file	*file;
+	struct inode	*inode; /* path.dentry.d_inode */
 	unsigned int	flags;
+	unsigned	seq;
 	int		last_type;
 	unsigned	depth;
 	char *saved_names[MAX_NESTED_LINKS + 1];
@@ -41,14 +44,15 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND};
  *  - require a directory
  *  - ending slashes ok even for nonexistent files
  *  - internal "there are more path components" flag
- *  - locked when lookup done with dcache_lock held
  *  - dentry cache is untrusted; force a real lookup
  */
-#define LOOKUP_FOLLOW		 1
-#define LOOKUP_DIRECTORY	 2
-#define LOOKUP_CONTINUE		 4
-#define LOOKUP_PARENT		16
-#define LOOKUP_REVAL		64
+#define LOOKUP_FOLLOW		0x0001
+#define LOOKUP_DIRECTORY	0x0002
+#define LOOKUP_CONTINUE		0x0004
+
+#define LOOKUP_PARENT		0x0010
+#define LOOKUP_REVAL		0x0020
+#define LOOKUP_RCU		0x0040
 /*
  * Intent data
  */
diff --git a/include/linux/ncp_fs.h b/include/linux/ncp_fs.h
index ef663061d5a..1c27f201c85 100644
--- a/include/linux/ncp_fs.h
+++ b/include/linux/ncp_fs.h
@@ -184,13 +184,13 @@ struct ncp_entry_info {
 	__u8			file_handle[6];
 };
 
-static inline struct ncp_server *NCP_SBP(struct super_block *sb)
+static inline struct ncp_server *NCP_SBP(const struct super_block *sb)
 {
 	return sb->s_fs_info;
 }
 
 #define NCP_SERVER(inode)	NCP_SBP((inode)->i_sb)
-static inline struct ncp_inode_info *NCP_FINFO(struct inode *inode)
+static inline struct ncp_inode_info *NCP_FINFO(const struct inode *inode)
 {
 	return container_of(inode, struct ncp_inode_info, vfs_inode);
 }
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 578debb801f..0f6b1c96581 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -493,6 +493,8 @@ static inline void napi_synchronize(const struct napi_struct *n)
 enum netdev_queue_state_t {
 	__QUEUE_STATE_XOFF,
 	__QUEUE_STATE_FROZEN,
+#define QUEUE_STATE_XOFF_OR_FROZEN ((1 << __QUEUE_STATE_XOFF)		| \
+				    (1 << __QUEUE_STATE_FROZEN))
 };
 
 struct netdev_queue {
@@ -503,6 +505,12 @@ struct netdev_queue {
 	struct Qdisc		*qdisc;
 	unsigned long		state;
 	struct Qdisc		*qdisc_sleeping;
+#ifdef CONFIG_RPS
+	struct kobject		kobj;
+#endif
+#if defined(CONFIG_XPS) && defined(CONFIG_NUMA)
+	int			numa_node;
+#endif
 /*
  * write mostly part
  */
@@ -517,6 +525,22 @@ struct netdev_queue {
 	u64			tx_dropped;
 } ____cacheline_aligned_in_smp;
 
+static inline int netdev_queue_numa_node_read(const struct netdev_queue *q)
+{
+#if defined(CONFIG_XPS) && defined(CONFIG_NUMA)
+	return q->numa_node;
+#else
+	return NUMA_NO_NODE;
+#endif
+}
+
+static inline void netdev_queue_numa_node_write(struct netdev_queue *q, int node)
+{
+#if defined(CONFIG_XPS) && defined(CONFIG_NUMA)
+	q->numa_node = node;
+#endif
+}
+
 #ifdef CONFIG_RPS
 /*
  * This structure holds an RPS map which can be of variable length.  The
@@ -592,11 +616,36 @@ struct netdev_rx_queue {
 	struct rps_map __rcu		*rps_map;
 	struct rps_dev_flow_table __rcu	*rps_flow_table;
 	struct kobject			kobj;
-	struct netdev_rx_queue		*first;
-	atomic_t			count;
+	struct net_device		*dev;
 } ____cacheline_aligned_in_smp;
 #endif /* CONFIG_RPS */
 
+#ifdef CONFIG_XPS
+/*
+ * This structure holds an XPS map which can be of variable length.  The
+ * map is an array of queues.
+ */
+struct xps_map {
+	unsigned int len;
+	unsigned int alloc_len;
+	struct rcu_head rcu;
+	u16 queues[0];
+};
+#define XPS_MAP_SIZE(_num) (sizeof(struct xps_map) + (_num * sizeof(u16)))
+#define XPS_MIN_MAP_ALLOC ((L1_CACHE_BYTES - sizeof(struct xps_map))	\
+    / sizeof(u16))
+
+/*
+ * This structure holds all XPS maps for device.  Maps are indexed by CPU.
+ */
+struct xps_dev_maps {
+	struct rcu_head rcu;
+	struct xps_map __rcu *cpu_map[0];
+};
+#define XPS_DEV_MAPS_SIZE (sizeof(struct xps_dev_maps) +		\
+    (nr_cpu_ids * sizeof(struct xps_map *)))
+#endif /* CONFIG_XPS */
+
 /*
  * This structure defines the management hooks for network devices.
  * The following hooks can be defined; unless noted otherwise, they are
@@ -683,7 +732,7 @@ struct netdev_rx_queue {
  *	   neither operation.
  *
  * void (*ndo_vlan_rx_register)(struct net_device *dev, struct vlan_group *grp);
- *	If device support VLAN receive accleration
+ *	If device support VLAN receive acceleration
  *	(ie. dev->features & NETIF_F_HW_VLAN_RX), then this function is called
  *	when vlan groups for the device changes.  Note: grp is NULL
  *	if no vlan's groups are being used.
@@ -995,8 +1044,8 @@ struct net_device {
 	unsigned int		real_num_rx_queues;
 #endif
 
-	rx_handler_func_t	*rx_handler;
-	void			*rx_handler_data;
+	rx_handler_func_t __rcu	*rx_handler;
+	void __rcu		*rx_handler_data;
 
 	struct netdev_queue __rcu *ingress_queue;
 
@@ -1017,6 +1066,10 @@ struct net_device {
 	unsigned long		tx_queue_len;	/* Max frames per queue allowed */
 	spinlock_t		tx_global_lock;
 
+#ifdef CONFIG_XPS
+	struct xps_dev_maps __rcu *xps_maps;
+#endif
+
 	/* These may be needed for future network-power-down code. */
 
 	/*
@@ -1307,7 +1360,8 @@ static inline struct net_device *first_net_device(struct net *net)
 
 extern int 			netdev_boot_setup_check(struct net_device *dev);
 extern unsigned long		netdev_boot_base(const char *prefix, int unit);
-extern struct net_device    *dev_getbyhwaddr(struct net *net, unsigned short type, char *hwaddr);
+extern struct net_device *dev_getbyhwaddr_rcu(struct net *net, unsigned short type,
+					      const char *hwaddr);
 extern struct net_device *dev_getfirstbyhwtype(struct net *net, unsigned short type);
 extern struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short type);
 extern void		dev_add_pack(struct packet_type *pt);
@@ -1600,9 +1654,9 @@ static inline int netif_queue_stopped(const struct net_device *dev)
 	return netif_tx_queue_stopped(netdev_get_tx_queue(dev, 0));
 }
 
-static inline int netif_tx_queue_frozen(const struct netdev_queue *dev_queue)
+static inline int netif_tx_queue_frozen_or_stopped(const struct netdev_queue *dev_queue)
 {
-	return test_bit(__QUEUE_STATE_FROZEN, &dev_queue->state);
+	return dev_queue->state & QUEUE_STATE_XOFF_OR_FROZEN;
 }
 
 /**
@@ -1693,6 +1747,16 @@ static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
 		__netif_schedule(txq->qdisc);
 }
 
+/*
+ * Returns a Tx hash for the given packet when dev->real_num_tx_queues is used
+ * as a distribution range limit for the returned value.
+ */
+static inline u16 skb_tx_hash(const struct net_device *dev,
+			      const struct sk_buff *skb)
+{
+	return __skb_tx_hash(dev, skb, dev->real_num_tx_queues);
+}
+
 /**
  *	netif_is_multiqueue - test if device has multiple transmit queues
  *	@dev: network device
@@ -2239,6 +2303,8 @@ unsigned long netdev_fix_features(unsigned long features, const char *name);
 void netif_stacked_transfer_operstate(const struct net_device *rootdev,
 					struct net_device *dev);
 
+int netif_get_vlan_features(struct sk_buff *skb, struct net_device *dev);
+
 static inline int net_gso_ok(int features, int gso_type)
 {
 	int feature = gso_type << NETIF_F_GSO_SHIFT;
@@ -2254,10 +2320,7 @@ static inline int skb_gso_ok(struct sk_buff *skb, int features)
 static inline int netif_needs_gso(struct net_device *dev, struct sk_buff *skb)
 {
 	if (skb_is_gso(skb)) {
-		int features = dev->features;
-
-		if (skb->protocol == htons(ETH_P_8021Q) || skb->vlan_tci)
-			features &= dev->vlan_features;
+		int features = netif_get_vlan_features(skb, dev);
 
 		return (!skb_gso_ok(skb, features) ||
 			unlikely(skb->ip_summed != CHECKSUM_PARTIAL));
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index 928a35ec21c..0ab7ca787b2 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -33,6 +33,8 @@
 
 #define NF_QUEUE_NR(x) ((((x) << NF_VERDICT_BITS) & NF_VERDICT_QMASK) | NF_QUEUE)
 
+#define NF_DROP_ERR(x) (((-x) << NF_VERDICT_BITS) | NF_DROP)
+
 /* only for userspace compatibility */
 #ifndef __KERNEL__
 /* Generic cache responses from hook functions.
@@ -215,7 +217,7 @@ NF_HOOK_COND(uint8_t pf, unsigned int hook, struct sk_buff *skb,
 	int ret;
 
 	if (!cond ||
-	    (ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, INT_MIN) == 1))
+	    ((ret = nf_hook_thresh(pf, hook, skb, in, out, okfn, INT_MIN)) == 1))
 		ret = okfn(skb);
 	return ret;
 }
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 742bec05144..0f04d985b41 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -611,8 +611,9 @@ struct _compat_xt_align {
 extern void xt_compat_lock(u_int8_t af);
 extern void xt_compat_unlock(u_int8_t af);
 
-extern int xt_compat_add_offset(u_int8_t af, unsigned int offset, short delta);
+extern int xt_compat_add_offset(u_int8_t af, unsigned int offset, int delta);
 extern void xt_compat_flush_offsets(u_int8_t af);
+extern void xt_compat_init_offsets(u_int8_t af, unsigned int number);
 extern int xt_compat_calc_jump(u_int8_t af, unsigned int offset);
 
 extern int xt_compat_match_offset(const struct xt_match *match);
diff --git a/include/linux/netfilter/xt_comment.h b/include/linux/netfilter/xt_comment.h
index eacfedc6b5d..0ea5e79f5bd 100644
--- a/include/linux/netfilter/xt_comment.h
+++ b/include/linux/netfilter/xt_comment.h
@@ -4,7 +4,7 @@
 #define XT_MAX_COMMENT_LEN 256
 
 struct xt_comment_info {
-	unsigned char comment[XT_MAX_COMMENT_LEN];
+	char comment[XT_MAX_COMMENT_LEN];
 };
 
 #endif /* XT_COMMENT_H */
diff --git a/include/linux/netfilter/xt_conntrack.h b/include/linux/netfilter/xt_conntrack.h
index 54f47a2f615..74b904d8f99 100644
--- a/include/linux/netfilter/xt_conntrack.h
+++ b/include/linux/netfilter/xt_conntrack.h
@@ -58,4 +58,19 @@ struct xt_conntrack_mtinfo2 {
 	__u16 state_mask, status_mask;
 };
 
+struct xt_conntrack_mtinfo3 {
+	union nf_inet_addr origsrc_addr, origsrc_mask;
+	union nf_inet_addr origdst_addr, origdst_mask;
+	union nf_inet_addr replsrc_addr, replsrc_mask;
+	union nf_inet_addr repldst_addr, repldst_mask;
+	__u32 expires_min, expires_max;
+	__u16 l4proto;
+	__u16 origsrc_port, origdst_port;
+	__u16 replsrc_port, repldst_port;
+	__u16 match_flags, invert_flags;
+	__u16 state_mask, status_mask;
+	__u16 origsrc_port_high, origdst_port_high;
+	__u16 replsrc_port_high, repldst_port_high;
+};
+
 #endif /*_XT_CONNTRACK_H*/
diff --git a/include/linux/netfilter_bridge/ebt_ip6.h b/include/linux/netfilter_bridge/ebt_ip6.h
index e5de9870151..22af18a3c16 100644
--- a/include/linux/netfilter_bridge/ebt_ip6.h
+++ b/include/linux/netfilter_bridge/ebt_ip6.h
@@ -18,8 +18,11 @@
 #define EBT_IP6_PROTO 0x08
 #define EBT_IP6_SPORT 0x10
 #define EBT_IP6_DPORT 0x20
+#define EBT_IP6_ICMP6 0x40
+
 #define EBT_IP6_MASK (EBT_IP6_SOURCE | EBT_IP6_DEST | EBT_IP6_TCLASS |\
-		      EBT_IP6_PROTO | EBT_IP6_SPORT | EBT_IP6_DPORT)
+		      EBT_IP6_PROTO | EBT_IP6_SPORT | EBT_IP6_DPORT | \
+		      EBT_IP6_ICMP6)
 #define EBT_IP6_MATCH "ip6"
 
 /* the same values are used for the invflags */
@@ -32,8 +35,14 @@ struct ebt_ip6_info {
 	uint8_t  protocol;
 	uint8_t  bitmask;
 	uint8_t  invflags;
-	uint16_t sport[2];
-	uint16_t dport[2];
+	union {
+		uint16_t sport[2];
+		uint8_t icmpv6_type[2];
+	};
+	union {
+		uint16_t dport[2];
+		uint8_t icmpv6_code[2];
+	};
 };
 
 #endif
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index 123566912d7..e2b9e63afa6 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -70,7 +70,7 @@ struct nlmsghdr {
    Check		NLM_F_EXCL
  */
 
-#define NLMSG_ALIGNTO	4
+#define NLMSG_ALIGNTO	4U
 #define NLMSG_ALIGN(len) ( ((len)+NLMSG_ALIGNTO-1) & ~(NLMSG_ALIGNTO-1) )
 #define NLMSG_HDRLEN	 ((int) NLMSG_ALIGN(sizeof(struct nlmsghdr)))
 #define NLMSG_LENGTH(len) ((len)+NLMSG_ALIGN(NLMSG_HDRLEN))
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index bba26684acd..0779bb8f95b 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -351,7 +351,7 @@ extern int nfs_refresh_inode(struct inode *, struct nfs_fattr *);
 extern int nfs_post_op_update_inode(struct inode *inode, struct nfs_fattr *fattr);
 extern int nfs_post_op_update_inode_force_wcc(struct inode *inode, struct nfs_fattr *fattr);
 extern int nfs_getattr(struct vfsmount *, struct dentry *, struct kstat *);
-extern int nfs_permission(struct inode *, int);
+extern int nfs_permission(struct inode *, int, unsigned int);
 extern int nfs_open(struct inode *, struct file *);
 extern int nfs_release(struct inode *, struct file *);
 extern int nfs_attribute_timeout(struct inode *inode);
@@ -401,6 +401,7 @@ extern const struct inode_operations nfs3_file_inode_operations;
 #endif /* CONFIG_NFS_V3 */
 extern const struct file_operations nfs_file_operations;
 extern const struct address_space_operations nfs_file_aops;
+extern const struct address_space_operations nfs_dir_aops;
 
 static inline struct nfs_open_context *nfs_file_open_context(struct file *filp)
 {
@@ -593,12 +594,6 @@ nfs_fileid_to_ino_t(u64 fileid)
 	return ino;
 }
 
-#define nfs_wait_event(clnt, wq, condition)				\
-({									\
-	int __retval = wait_event_killable(wq, condition);		\
-	__retval;							\
-})
-
 #define NFS_JUKEBOX_RETRY_TIME (5 * HZ)
 
 #endif /* __KERNEL__ */
diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h
index f8b60e7f4c4..d55cee73f63 100644
--- a/include/linux/nfs_page.h
+++ b/include/linux/nfs_page.h
@@ -29,6 +29,7 @@
  */
 enum {
 	PG_BUSY = 0,
+	PG_MAPPED,
 	PG_CLEAN,
 	PG_NEED_COMMIT,
 	PG_NEED_RESCHED,
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index ba6cc8f223c..80f07198a31 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -483,6 +483,7 @@ struct nfs_entry {
 	int			eof;
 	struct nfs_fh *		fh;
 	struct nfs_fattr *	fattr;
+	unsigned char		d_type;
 };
 
 /*
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 0edb2566c14..2b89b712565 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -172,10 +172,10 @@
  * 	to the specified ISO/IEC 3166-1 alpha2 country code. The core will
  * 	store this as a valid request and then query userspace for it.
  *
- * @NL80211_CMD_GET_MESH_PARAMS: Get mesh networking properties for the
+ * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the
  *	interface identified by %NL80211_ATTR_IFINDEX
  *
- * @NL80211_CMD_SET_MESH_PARAMS: Set mesh networking properties for the
+ * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the
  *      interface identified by %NL80211_ATTR_IFINDEX
  *
  * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The
@@ -358,11 +358,16 @@
  *	user space application). %NL80211_ATTR_FRAME is used to specify the
  *	frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and
  *	optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on
- *	which channel the frame is to be transmitted or was received. This
- *	channel has to be the current channel (remain-on-channel or the
- *	operational channel). When called, this operation returns a cookie
- *	(%NL80211_ATTR_COOKIE) that will be included with the TX status event
- *	pertaining to the TX request.
+ *	which channel the frame is to be transmitted or was received. If this
+ *	channel is not the current channel (remain-on-channel or the
+ *	operational channel) the device will switch to the given channel and
+ *	transmit the frame, optionally waiting for a response for the time
+ *	specified using %NL80211_ATTR_DURATION. When called, this operation
+ *	returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
+ *	TX status event pertaining to the TX request.
+ * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
+ *	command may be used with the corresponding cookie to cancel the wait
+ *	time if it is known that it is no longer necessary.
  * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility.
  * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame
  *	transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies
@@ -389,6 +394,18 @@
  *
  * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
  *
+ * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
+ *	mesh config parameters may be given.
+ * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
+ *	network is determined by the network interface.
+ *
+ * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame
+ *	notification. This event is used to indicate that an unprotected
+ *	deauthentication frame was dropped when MFP is in use.
+ * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame
+ *	notification. This event is used to indicate that an unprotected
+ *	disassociation frame was dropped when MFP is in use.
+ *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -431,8 +448,8 @@ enum nl80211_commands {
 	NL80211_CMD_SET_REG,
 	NL80211_CMD_REQ_SET_REG,
 
-	NL80211_CMD_GET_MESH_PARAMS,
-	NL80211_CMD_SET_MESH_PARAMS,
+	NL80211_CMD_GET_MESH_CONFIG,
+	NL80211_CMD_SET_MESH_CONFIG,
 
 	NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */,
 
@@ -493,6 +510,14 @@ enum nl80211_commands {
 	NL80211_CMD_SET_CHANNEL,
 	NL80211_CMD_SET_WDS_PEER,
 
+	NL80211_CMD_FRAME_WAIT_CANCEL,
+
+	NL80211_CMD_JOIN_MESH,
+	NL80211_CMD_LEAVE_MESH,
+
+	NL80211_CMD_UNPROT_DEAUTHENTICATE,
+	NL80211_CMD_UNPROT_DISASSOCIATE,
+
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -513,6 +538,10 @@ enum nl80211_commands {
 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE
 #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT
 
+/* source-level API compatibility */
+#define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG
+#define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG
+
 /**
  * enum nl80211_attrs - nl80211 netlink attributes
  *
@@ -758,6 +787,9 @@ enum nl80211_commands {
  *	cache, a wiphy attribute.
  *
  * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
+ * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that
+ *	specifies the maximum duration that can be requested with the
+ *	remain-on-channel operation, in milliseconds, u32.
  *
  * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
  *
@@ -804,6 +836,51 @@ enum nl80211_commands {
  * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
  *	means support for per-station GTKs.
  *
+ * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for transmitting. If an antenna is not selected in this
+ *	bitmap the hardware is not allowed to transmit on this antenna.
+ *
+ *	Each bit represents one antenna, starting with antenna 1 at the first
+ *	bit. Depending on which antennas are selected in the bitmap, 802.11n
+ *	drivers can derive which chainmasks to use (if all antennas belonging to
+ *	a particular chain are disabled this chain should be disabled) and if
+ *	a chain has diversity antennas wether diversity should be used or not.
+ *	HT capabilities (STBC, TX Beamforming, Antenna selection) can be
+ *	derived from the available chains after applying the antenna mask.
+ *	Non-802.11n drivers can derive wether to use diversity or not.
+ *	Drivers may reject configurations or RX/TX mask combinations they cannot
+ *	support by returning -EINVAL.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving.
+ *	This can be used to mask out antennas which are not attached or should
+ *	not be used for receiving. If an antenna is not selected in this bitmap
+ *	the hardware should not be configured to receive on this antenna.
+ *	For a more detailed descripton see @NL80211_ATTR_WIPHY_ANTENNA_TX.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available
+ *	for configuration as TX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available
+ *	for configuration as RX antennas via the above parameters.
+ *
+ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
+ *
+ * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be
+ *	transmitted on another channel when the channel given doesn't match
+ *	the current channel. If the current channel doesn't match and this
+ *	flag isn't set, the frame will be rejected. This is also used as an
+ *	nl80211 capability flag.
+ *
+ * @NL80211_ATTR_BSS_HTOPMODE: HT operation mode (u16)
+ *
+ * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ *	attributes, specifying what a key should be set as default as.
+ *	See &enum nl80211_key_default_types.
+ *
+ * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters.  These cannot be
+ * changed once the mesh is active.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -858,7 +935,7 @@ enum nl80211_attrs {
 	NL80211_ATTR_REG_ALPHA2,
 	NL80211_ATTR_REG_RULES,
 
-	NL80211_ATTR_MESH_PARAMS,
+	NL80211_ATTR_MESH_CONFIG,
 
 	NL80211_ATTR_BSS_BASIC_RATES,
 
@@ -973,6 +1050,24 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_SUPPORT_IBSS_RSN,
 
+	NL80211_ATTR_WIPHY_ANTENNA_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_RX,
+
+	NL80211_ATTR_MCAST_RATE,
+
+	NL80211_ATTR_OFFCHANNEL_TX_OK,
+
+	NL80211_ATTR_BSS_HT_OPMODE,
+
+	NL80211_ATTR_KEY_DEFAULT_TYPES,
+
+	NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
+
+	NL80211_ATTR_MESH_SETUP,
+
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
+	NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -981,6 +1076,7 @@ enum nl80211_attrs {
 
 /* source-level API compatibility */
 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
+#define	NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
 
 /*
  * Allow user space programs to use #ifdef on new attributes by defining them
@@ -1139,6 +1235,7 @@ enum nl80211_rate_info {
  *	station)
  * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
  * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+ * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
  */
 enum nl80211_sta_info {
 	__NL80211_STA_INFO_INVALID,
@@ -1154,6 +1251,7 @@ enum nl80211_sta_info {
 	NL80211_STA_INFO_TX_PACKETS,
 	NL80211_STA_INFO_TX_RETRIES,
 	NL80211_STA_INFO_TX_FAILED,
+	NL80211_STA_INFO_SIGNAL_AVG,
 
 	/* keep last */
 	__NL80211_STA_INFO_AFTER_LAST,
@@ -1307,7 +1405,11 @@ enum nl80211_bitrate_attr {
  * 	wireless core it thinks its knows the regulatory domain we should be in.
  * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an
  * 	802.11 country information element with regulatory information it
- * 	thinks we should consider.
+ * 	thinks we should consider. cfg80211 only processes the country
+ *	code from the IE, and relies on the regulatory domain information
+ *	structure pased by userspace (CRDA) from our wireless-regdb.
+ *	If a channel is enabled but the country code indicates it should
+ *	be disabled we disable the channel and re-enable it upon disassociation.
  */
 enum nl80211_reg_initiator {
 	NL80211_REGDOM_SET_BY_CORE,
@@ -1476,7 +1578,8 @@ enum nl80211_mntr_flags {
 /**
  * enum nl80211_meshconf_params - mesh configuration parameters
  *
- * Mesh configuration parameters
+ * Mesh configuration parameters. These can be changed while the mesh is
+ * active.
  *
  * @__NL80211_MESHCONF_INVALID: internal use
  *
@@ -1525,6 +1628,9 @@ enum nl80211_mntr_flags {
  *
  * @NL80211_MESHCONF_ROOTMODE: whether root mode is enabled or not
  *
+ * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a
+ * source mesh point for path selection elements.
+ *
  * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute
  *
  * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
@@ -1545,6 +1651,7 @@ enum nl80211_meshconf_params {
 	NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
 	NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
 	NL80211_MESHCONF_HWMP_ROOTMODE,
+	NL80211_MESHCONF_ELEMENT_TTL,
 
 	/* keep last */
 	__NL80211_MESHCONF_ATTR_AFTER_LAST,
@@ -1552,6 +1659,39 @@ enum nl80211_meshconf_params {
 };
 
 /**
+ * enum nl80211_mesh_setup_params - mesh setup parameters
+ *
+ * Mesh setup parameters.  These are used to start/join a mesh and cannot be
+ * changed while the mesh is active.
+ *
+ * @__NL80211_MESH_SETUP_INVALID: Internal use
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a
+ * vendor specific path selection algorithm or disable it to use the default
+ * HWMP.
+ *
+ * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a
+ * vendor specific path metric or disable it to use the default Airtime
+ * metric.
+ *
+ * @NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE: A vendor specific information
+ * element that vendors will use to identify the path selection methods and
+ * metrics in use.
+ *
+ * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use
+ */
+enum nl80211_mesh_setup_params {
+	__NL80211_MESH_SETUP_INVALID,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL,
+	NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC,
+	NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE,
+
+	/* keep last */
+	__NL80211_MESH_SETUP_ATTR_AFTER_LAST,
+	NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_txq_attr - TX queue parameter attributes
  * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved
  * @NL80211_TXQ_ATTR_QUEUE: TX queue identifier (NL80211_TXQ_Q_*)
@@ -1709,6 +1849,23 @@ enum nl80211_wpa_versions {
 };
 
 /**
+ * enum nl80211_key_default_types - key default types
+ * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid
+ * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default
+ *	unicast key
+ * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default
+ *	multicast key
+ * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types
+ */
+enum nl80211_key_default_types {
+	__NL80211_KEY_DEFAULT_TYPE_INVALID,
+	NL80211_KEY_DEFAULT_TYPE_UNICAST,
+	NL80211_KEY_DEFAULT_TYPE_MULTICAST,
+
+	NUM_NL80211_KEY_DEFAULT_TYPES
+};
+
+/**
  * enum nl80211_key_attributes - key attributes
  * @__NL80211_KEY_INVALID: invalid
  * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of
@@ -1724,6 +1881,9 @@ enum nl80211_wpa_versions {
  * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
  *	specified the default depends on whether a MAC address was
  *	given with the command using the key or not (u32)
+ * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags
+ *	attributes, specifying what a key should be set as default as.
+ *	See &enum nl80211_key_default_types.
  * @__NL80211_KEY_AFTER_LAST: internal
  * @NL80211_KEY_MAX: highest key attribute
  */
@@ -1736,6 +1896,7 @@ enum nl80211_key_attributes {
 	NL80211_KEY_DEFAULT,
 	NL80211_KEY_DEFAULT_MGMT,
 	NL80211_KEY_TYPE,
+	NL80211_KEY_DEFAULT_TYPES,
 
 	/* keep last */
 	__NL80211_KEY_AFTER_LAST,
@@ -1786,6 +1947,8 @@ enum nl80211_ps_state {
  *	the minimum amount the RSSI level must change after an event before a
  *	new event may be issued (to reduce effects of RSSI oscillation).
  * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event
+ * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many
+ *	consecutive packets were not acknowledged by the peer
  * @__NL80211_ATTR_CQM_AFTER_LAST: internal
  * @NL80211_ATTR_CQM_MAX: highest key attribute
  */
@@ -1794,6 +1957,7 @@ enum nl80211_attr_cqm {
 	NL80211_ATTR_CQM_RSSI_THOLD,
 	NL80211_ATTR_CQM_RSSI_HYST,
 	NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT,
+	NL80211_ATTR_CQM_PKT_LOSS_EVENT,
 
 	/* keep last */
 	__NL80211_ATTR_CQM_AFTER_LAST,
diff --git a/include/linux/nmi.h b/include/linux/nmi.h
index 06aab5eee13..c536f8545f7 100644
--- a/include/linux/nmi.h
+++ b/include/linux/nmi.h
@@ -14,22 +14,14 @@
  * may be used to reset the timeout - for code which intentionally
  * disables interrupts for a long time. This call is stateless.
  */
-#ifdef ARCH_HAS_NMI_WATCHDOG
+#if defined(ARCH_HAS_NMI_WATCHDOG) || defined(CONFIG_HARDLOCKUP_DETECTOR)
 #include <asm/nmi.h>
 extern void touch_nmi_watchdog(void);
-extern void acpi_nmi_disable(void);
-extern void acpi_nmi_enable(void);
 #else
-#ifndef CONFIG_HARDLOCKUP_DETECTOR
 static inline void touch_nmi_watchdog(void)
 {
 	touch_softlockup_watchdog();
 }
-#else
-extern void touch_nmi_watchdog(void);
-#endif
-static inline void acpi_nmi_disable(void) { }
-static inline void acpi_nmi_enable(void) { }
 #endif
 
 /*
diff --git a/include/linux/node.h b/include/linux/node.h
index 06292dac3ea..1466945cc9e 100644
--- a/include/linux/node.h
+++ b/include/linux/node.h
@@ -10,11 +10,6 @@
  *
  * Nodes are exported via driverfs in the class/node/devices/
  * directory. 
- *
- * Per-node interfaces can be implemented using a struct device_interface. 
- * See the following for how to do this: 
- * - drivers/base/intf.c 
- * - Documentation/driver-model/interface.txt
  */
 #ifndef _LINUX_NODE_H_
 #define _LINUX_NODE_H_
diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h
index 5bb13b3db84..b02195dfc1b 100644
--- a/include/linux/page_cgroup.h
+++ b/include/linux/page_cgroup.h
@@ -59,8 +59,6 @@ static inline void ClearPageCgroup##uname(struct page_cgroup *pc)	\
 static inline int TestClearPageCgroup##uname(struct page_cgroup *pc)	\
 	{ return test_and_clear_bit(PCG_##lname, &pc->flags);  }
 
-TESTPCGFLAG(Locked, LOCK)
-
 /* Cache flag is set only once (at allocation) */
 TESTPCGFLAG(Cache, CACHE)
 CLEARPCGFLAG(Cache, CACHE)
@@ -104,6 +102,11 @@ static inline void unlock_page_cgroup(struct page_cgroup *pc)
 	bit_spin_unlock(PCG_LOCK, &pc->flags);
 }
 
+static inline int page_is_cgroup_locked(struct page_cgroup *pc)
+{
+	return bit_spin_is_locked(PCG_LOCK, &pc->flags);
+}
+
 #else /* CONFIG_CGROUP_MEM_RES_CTLR */
 struct page_cgroup;
 
diff --git a/include/linux/path.h b/include/linux/path.h
index edc98dec626..a581e8c0653 100644
--- a/include/linux/path.h
+++ b/include/linux/path.h
@@ -10,7 +10,9 @@ struct path {
 };
 
 extern void path_get(struct path *);
+extern void path_get_long(struct path *);
 extern void path_put(struct path *);
+extern void path_put_long(struct path *);
 
 static inline int path_equal(const struct path *path1, const struct path *path2)
 {
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index c6bcfe93b9c..cb845c16ad7 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2047,6 +2047,7 @@
 #define PCI_DEVICE_ID_AFAVLAB_P030	0x2182
 #define PCI_SUBDEVICE_ID_AFAVLAB_P061		0x2150
 
+#define PCI_VENDOR_ID_BCM_GVC          0x14a4
 #define PCI_VENDOR_ID_BROADCOM		0x14e4
 #define PCI_DEVICE_ID_TIGON3_5752	0x1600
 #define PCI_DEVICE_ID_TIGON3_5752M	0x1601
@@ -2441,6 +2442,7 @@
 #define PCI_DEVICE_ID_INTEL_MFD_SDIO2	0x0822
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC0	0x0823
 #define PCI_DEVICE_ID_INTEL_MFD_EMMC1	0x0824
+#define PCI_DEVICE_ID_INTEL_MRST_SD2	0x084F
 #define PCI_DEVICE_ID_INTEL_I960	0x0960
 #define PCI_DEVICE_ID_INTEL_I960RM	0x0962
 #define PCI_DEVICE_ID_INTEL_8257X_SOL	0x1062
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 5095b834a6f..27c3c6fcfad 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -240,6 +240,21 @@ extern void __bad_size_call_parameter(void);
 	pscr_ret__;							\
 })
 
+#define __pcpu_size_call_return2(stem, variable, ...)			\
+({									\
+	typeof(variable) pscr2_ret__;					\
+	__verify_pcpu_ptr(&(variable));					\
+	switch(sizeof(variable)) {					\
+	case 1: pscr2_ret__ = stem##1(variable, __VA_ARGS__); break;	\
+	case 2: pscr2_ret__ = stem##2(variable, __VA_ARGS__); break;	\
+	case 4: pscr2_ret__ = stem##4(variable, __VA_ARGS__); break;	\
+	case 8: pscr2_ret__ = stem##8(variable, __VA_ARGS__); break;	\
+	default:							\
+		__bad_size_call_parameter(); break;			\
+	}								\
+	pscr2_ret__;							\
+})
+
 #define __pcpu_size_call(stem, variable, ...)				\
 do {									\
 	__verify_pcpu_ptr(&(variable));					\
@@ -402,6 +417,89 @@ do {									\
 # define this_cpu_xor(pcp, val)		__pcpu_size_call(this_cpu_or_, (pcp), (val))
 #endif
 
+#define _this_cpu_generic_add_return(pcp, val)				\
+({									\
+	typeof(pcp) ret__;						\
+	preempt_disable();						\
+	__this_cpu_add(pcp, val);					\
+	ret__ = __this_cpu_read(pcp);					\
+	preempt_enable();						\
+	ret__;								\
+})
+
+#ifndef this_cpu_add_return
+# ifndef this_cpu_add_return_1
+#  define this_cpu_add_return_1(pcp, val)	_this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef this_cpu_add_return_2
+#  define this_cpu_add_return_2(pcp, val)	_this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef this_cpu_add_return_4
+#  define this_cpu_add_return_4(pcp, val)	_this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef this_cpu_add_return_8
+#  define this_cpu_add_return_8(pcp, val)	_this_cpu_generic_add_return(pcp, val)
+# endif
+# define this_cpu_add_return(pcp, val)	__pcpu_size_call_return2(this_cpu_add_return_, pcp, val)
+#endif
+
+#define this_cpu_sub_return(pcp, val)	this_cpu_add_return(pcp, -(val))
+#define this_cpu_inc_return(pcp)	this_cpu_add_return(pcp, 1)
+#define this_cpu_dec_return(pcp)	this_cpu_add_return(pcp, -1)
+
+#define _this_cpu_generic_xchg(pcp, nval)				\
+({	typeof(pcp) ret__;						\
+	preempt_disable();						\
+	ret__ = __this_cpu_read(pcp);					\
+	__this_cpu_write(pcp, nval);					\
+	preempt_enable();						\
+	ret__;								\
+})
+
+#ifndef this_cpu_xchg
+# ifndef this_cpu_xchg_1
+#  define this_cpu_xchg_1(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef this_cpu_xchg_2
+#  define this_cpu_xchg_2(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef this_cpu_xchg_4
+#  define this_cpu_xchg_4(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef this_cpu_xchg_8
+#  define this_cpu_xchg_8(pcp, nval)	_this_cpu_generic_xchg(pcp, nval)
+# endif
+# define this_cpu_xchg(pcp, nval)	\
+	__pcpu_size_call_return2(this_cpu_xchg_, (pcp), nval)
+#endif
+
+#define _this_cpu_generic_cmpxchg(pcp, oval, nval)			\
+({	typeof(pcp) ret__;						\
+	preempt_disable();						\
+	ret__ = __this_cpu_read(pcp);					\
+	if (ret__ == (oval))						\
+		__this_cpu_write(pcp, nval);				\
+	preempt_enable();						\
+	ret__;								\
+})
+
+#ifndef this_cpu_cmpxchg
+# ifndef this_cpu_cmpxchg_1
+#  define this_cpu_cmpxchg_1(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef this_cpu_cmpxchg_2
+#  define this_cpu_cmpxchg_2(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef this_cpu_cmpxchg_4
+#  define this_cpu_cmpxchg_4(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef this_cpu_cmpxchg_8
+#  define this_cpu_cmpxchg_8(pcp, oval, nval)	_this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# define this_cpu_cmpxchg(pcp, oval, nval)	\
+	__pcpu_size_call_return2(this_cpu_cmpxchg_, pcp, oval, nval)
+#endif
+
 /*
  * Generic percpu operations that do not require preemption handling.
  * Either we do not care about races or the caller has the
@@ -529,11 +627,87 @@ do {									\
 # define __this_cpu_xor(pcp, val)	__pcpu_size_call(__this_cpu_xor_, (pcp), (val))
 #endif
 
+#define __this_cpu_generic_add_return(pcp, val)				\
+({									\
+	__this_cpu_add(pcp, val);					\
+	__this_cpu_read(pcp);						\
+})
+
+#ifndef __this_cpu_add_return
+# ifndef __this_cpu_add_return_1
+#  define __this_cpu_add_return_1(pcp, val)	__this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef __this_cpu_add_return_2
+#  define __this_cpu_add_return_2(pcp, val)	__this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef __this_cpu_add_return_4
+#  define __this_cpu_add_return_4(pcp, val)	__this_cpu_generic_add_return(pcp, val)
+# endif
+# ifndef __this_cpu_add_return_8
+#  define __this_cpu_add_return_8(pcp, val)	__this_cpu_generic_add_return(pcp, val)
+# endif
+# define __this_cpu_add_return(pcp, val)	__pcpu_size_call_return2(this_cpu_add_return_, pcp, val)
+#endif
+
+#define __this_cpu_sub_return(pcp, val)	this_cpu_add_return(pcp, -(val))
+#define __this_cpu_inc_return(pcp)	this_cpu_add_return(pcp, 1)
+#define __this_cpu_dec_return(pcp)	this_cpu_add_return(pcp, -1)
+
+#define __this_cpu_generic_xchg(pcp, nval)				\
+({	typeof(pcp) ret__;						\
+	ret__ = __this_cpu_read(pcp);					\
+	__this_cpu_write(pcp, nval);					\
+	ret__;								\
+})
+
+#ifndef __this_cpu_xchg
+# ifndef __this_cpu_xchg_1
+#  define __this_cpu_xchg_1(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef __this_cpu_xchg_2
+#  define __this_cpu_xchg_2(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef __this_cpu_xchg_4
+#  define __this_cpu_xchg_4(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
+# endif
+# ifndef __this_cpu_xchg_8
+#  define __this_cpu_xchg_8(pcp, nval)	__this_cpu_generic_xchg(pcp, nval)
+# endif
+# define __this_cpu_xchg(pcp, nval)	\
+	__pcpu_size_call_return2(__this_cpu_xchg_, (pcp), nval)
+#endif
+
+#define __this_cpu_generic_cmpxchg(pcp, oval, nval)			\
+({									\
+	typeof(pcp) ret__;						\
+	ret__ = __this_cpu_read(pcp);					\
+	if (ret__ == (oval))						\
+		__this_cpu_write(pcp, nval);				\
+	ret__;								\
+})
+
+#ifndef __this_cpu_cmpxchg
+# ifndef __this_cpu_cmpxchg_1
+#  define __this_cpu_cmpxchg_1(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef __this_cpu_cmpxchg_2
+#  define __this_cpu_cmpxchg_2(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef __this_cpu_cmpxchg_4
+#  define __this_cpu_cmpxchg_4(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef __this_cpu_cmpxchg_8
+#  define __this_cpu_cmpxchg_8(pcp, oval, nval)	__this_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# define __this_cpu_cmpxchg(pcp, oval, nval)	\
+	__pcpu_size_call_return2(__this_cpu_cmpxchg_, pcp, oval, nval)
+#endif
+
 /*
  * IRQ safe versions of the per cpu RMW operations. Note that these operations
  * are *not* safe against modification of the same variable from another
  * processors (which one gets when using regular atomic operations)
- . They are guaranteed to be atomic vs. local interrupts and
+ * They are guaranteed to be atomic vs. local interrupts and
  * preemption only.
  */
 #define irqsafe_cpu_generic_to_op(pcp, val, op)				\
@@ -620,4 +794,33 @@ do {									\
 # define irqsafe_cpu_xor(pcp, val) __pcpu_size_call(irqsafe_cpu_xor_, (val))
 #endif
 
+#define irqsafe_cpu_generic_cmpxchg(pcp, oval, nval)			\
+({									\
+	typeof(pcp) ret__;						\
+	unsigned long flags;						\
+	local_irq_save(flags);						\
+	ret__ = __this_cpu_read(pcp);					\
+	if (ret__ == (oval))						\
+		__this_cpu_write(pcp, nval);				\
+	local_irq_restore(flags);					\
+	ret__;								\
+})
+
+#ifndef irqsafe_cpu_cmpxchg
+# ifndef irqsafe_cpu_cmpxchg_1
+#  define irqsafe_cpu_cmpxchg_1(pcp, oval, nval)	irqsafe_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef irqsafe_cpu_cmpxchg_2
+#  define irqsafe_cpu_cmpxchg_2(pcp, oval, nval)	irqsafe_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef irqsafe_cpu_cmpxchg_4
+#  define irqsafe_cpu_cmpxchg_4(pcp, oval, nval)	irqsafe_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# ifndef irqsafe_cpu_cmpxchg_8
+#  define irqsafe_cpu_cmpxchg_8(pcp, oval, nval)	irqsafe_cpu_generic_cmpxchg(pcp, oval, nval)
+# endif
+# define irqsafe_cpu_cmpxchg(pcp, oval, nval)		\
+	__pcpu_size_call_return2(irqsafe_cpu_cmpxchg_, (pcp), oval, nval)
+#endif
+
 #endif /* __LINUX_PERCPU_H */
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index 057bf22a832..dda5b0a3ff6 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -215,8 +215,9 @@ struct perf_event_attr {
 				 */
 				precise_ip     :  2, /* skid constraint       */
 				mmap_data      :  1, /* non-exec mmap data    */
+				sample_id_all  :  1, /* sample_type all events */
 
-				__reserved_1   : 46;
+				__reserved_1   : 45;
 
 	union {
 		__u32		wakeup_events;	  /* wakeup every n events */
@@ -327,6 +328,15 @@ struct perf_event_header {
 enum perf_event_type {
 
 	/*
+	 * If perf_event_attr.sample_id_all is set then all event types will
+	 * have the sample_type selected fields related to where/when
+	 * (identity) an event took place (TID, TIME, ID, CPU, STREAM_ID)
+	 * described in PERF_RECORD_SAMPLE below, it will be stashed just after
+	 * the perf_event_header and the fields already present for the existing
+	 * fields, i.e. at the end of the payload. That way a newer perf.data
+	 * file will be supported by older perf tools, with these new optional
+	 * fields being ignored.
+	 *
 	 * The MMAP events record the PROT_EXEC mappings so that we can
 	 * correlate userspace IPs to code. They have the following structure:
 	 *
@@ -578,6 +588,10 @@ struct perf_event;
 struct pmu {
 	struct list_head		entry;
 
+	struct device			*dev;
+	char				*name;
+	int				type;
+
 	int * __percpu			pmu_disable_count;
 	struct perf_cpu_context * __percpu pmu_cpu_context;
 	int				task_ctx_nr;
@@ -747,7 +761,20 @@ struct perf_event {
 	u64				tstamp_running;
 	u64				tstamp_stopped;
 
+	/*
+	 * timestamp shadows the actual context timing but it can
+	 * be safely used in NMI interrupt context. It reflects the
+	 * context time as it was when the event was last scheduled in.
+	 *
+	 * ctx_time already accounts for ctx->timestamp. Therefore to
+	 * compute ctx_time for a sample, simply add perf_clock().
+	 */
+	u64				shadow_ctx_time;
+
 	struct perf_event_attr		attr;
+	u16				header_size;
+	u16				id_header_size;
+	u16				read_size;
 	struct hw_perf_event		hw;
 
 	struct perf_event_context	*ctx;
@@ -840,6 +867,7 @@ struct perf_event_context {
 	int				nr_active;
 	int				is_active;
 	int				nr_stat;
+	int				rotate_disable;
 	atomic_t			refcount;
 	struct task_struct		*task;
 
@@ -876,6 +904,7 @@ struct perf_cpu_context {
 	int				exclusive;
 	struct list_head		rotation_list;
 	int				jiffies_interval;
+	struct pmu			*active_pmu;
 };
 
 struct perf_output_handle {
@@ -891,27 +920,13 @@ struct perf_output_handle {
 
 #ifdef CONFIG_PERF_EVENTS
 
-extern int perf_pmu_register(struct pmu *pmu);
+extern int perf_pmu_register(struct pmu *pmu, char *name, int type);
 extern void perf_pmu_unregister(struct pmu *pmu);
 
 extern int perf_num_counters(void);
 extern const char *perf_pmu_name(void);
 extern void __perf_event_task_sched_in(struct task_struct *task);
 extern void __perf_event_task_sched_out(struct task_struct *task, struct task_struct *next);
-
-extern atomic_t perf_task_events;
-
-static inline void perf_event_task_sched_in(struct task_struct *task)
-{
-	COND_STMT(&perf_task_events, __perf_event_task_sched_in(task));
-}
-
-static inline
-void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
-{
-	COND_STMT(&perf_task_events, __perf_event_task_sched_out(task, next));
-}
-
 extern int perf_event_init_task(struct task_struct *child);
 extern void perf_event_exit_task(struct task_struct *child);
 extern void perf_event_free_task(struct task_struct *task);
@@ -972,6 +987,11 @@ extern int perf_event_overflow(struct perf_event *event, int nmi,
 				 struct perf_sample_data *data,
 				 struct pt_regs *regs);
 
+static inline bool is_sampling_event(struct perf_event *event)
+{
+	return event->attr.sample_period != 0;
+}
+
 /*
  * Return 1 for a software event, 0 for a hardware event
  */
@@ -1020,6 +1040,21 @@ have_event:
 	__perf_sw_event(event_id, nr, nmi, regs, addr);
 }
 
+extern atomic_t perf_task_events;
+
+static inline void perf_event_task_sched_in(struct task_struct *task)
+{
+	COND_STMT(&perf_task_events, __perf_event_task_sched_in(task));
+}
+
+static inline
+void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
+{
+	perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
+
+	COND_STMT(&perf_task_events, __perf_event_task_sched_out(task, next));
+}
+
 extern void perf_event_mmap(struct vm_area_struct *vma);
 extern struct perf_guest_info_callbacks *perf_guest_cbs;
 extern int perf_register_guest_info_callbacks(struct perf_guest_info_callbacks *callbacks);
diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h
index 445796945ac..bb27d7ec2fb 100644
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -160,5 +160,6 @@ void generic_pipe_buf_release(struct pipe_inode_info *, struct pipe_buffer *);
 
 /* for F_SETPIPE_SZ and F_GETPIPE_SZ */
 long pipe_fcntl(struct file *, unsigned int, unsigned long arg);
+struct pipe_inode_info *get_pipe_info(struct file *file);
 
 #endif
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 3ec2358f869..d19f1cca7f7 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -77,7 +77,8 @@ static inline void device_set_run_wake(struct device *dev, bool enable)
 
 static inline bool pm_runtime_suspended(struct device *dev)
 {
-	return dev->power.runtime_status == RPM_SUSPENDED;
+	return dev->power.runtime_status == RPM_SUSPENDED
+		&& !dev->power.disable_depth;
 }
 
 static inline void pm_runtime_mark_last_busy(struct device *dev)
diff --git a/include/linux/posix_acl.h b/include/linux/posix_acl.h
index 67608161df6..d68283a898b 100644
--- a/include/linux/posix_acl.h
+++ b/include/linux/posix_acl.h
@@ -108,6 +108,25 @@ static inline struct posix_acl *get_cached_acl(struct inode *inode, int type)
 	return acl;
 }
 
+static inline int negative_cached_acl(struct inode *inode, int type)
+{
+	struct posix_acl **p, *acl;
+	switch (type) {
+	case ACL_TYPE_ACCESS:
+		p = &inode->i_acl;
+		break;
+	case ACL_TYPE_DEFAULT:
+		p = &inode->i_default_acl;
+		break;
+	default:
+		BUG();
+	}
+	acl = ACCESS_ONCE(*p);
+	if (acl)
+		return 0;
+	return 1;
+}
+
 static inline void set_cached_acl(struct inode *inode,
 				  int type,
 				  struct posix_acl *acl)
diff --git a/include/linux/printk.h b/include/linux/printk.h
new file mode 100644
index 00000000000..b772ca5fbdf
--- /dev/null
+++ b/include/linux/printk.h
@@ -0,0 +1,248 @@
+#ifndef __KERNEL_PRINTK__
+#define __KERNEL_PRINTK__
+
+extern const char linux_banner[];
+extern const char linux_proc_banner[];
+
+#define	KERN_EMERG	"<0>"	/* system is unusable			*/
+#define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
+#define	KERN_CRIT	"<2>"	/* critical conditions			*/
+#define	KERN_ERR	"<3>"	/* error conditions			*/
+#define	KERN_WARNING	"<4>"	/* warning conditions			*/
+#define	KERN_NOTICE	"<5>"	/* normal but significant condition	*/
+#define	KERN_INFO	"<6>"	/* informational			*/
+#define	KERN_DEBUG	"<7>"	/* debug-level messages			*/
+
+/* Use the default kernel loglevel */
+#define KERN_DEFAULT	"<d>"
+/*
+ * Annotation for a "continued" line of log printout (only done after a
+ * line that had no enclosing \n). Only to be used by core/arch code
+ * during early bootup (a continued line is not SMP-safe otherwise).
+ */
+#define	KERN_CONT	"<c>"
+
+extern int console_printk[];
+
+#define console_loglevel (console_printk[0])
+#define default_message_loglevel (console_printk[1])
+#define minimum_console_loglevel (console_printk[2])
+#define default_console_loglevel (console_printk[3])
+
+struct va_format {
+	const char *fmt;
+	va_list *va;
+};
+
+/*
+ * FW_BUG
+ * Add this to a message where you are sure the firmware is buggy or behaves
+ * really stupid or out of spec. Be aware that the responsible BIOS developer
+ * should be able to fix this issue or at least get a concrete idea of the
+ * problem by reading your message without the need of looking at the kernel
+ * code.
+ *
+ * Use it for definite and high priority BIOS bugs.
+ *
+ * FW_WARN
+ * Use it for not that clear (e.g. could the kernel messed up things already?)
+ * and medium priority BIOS bugs.
+ *
+ * FW_INFO
+ * Use this one if you want to tell the user or vendor about something
+ * suspicious, but generally harmless related to the firmware.
+ *
+ * Use it for information or very low priority BIOS bugs.
+ */
+#define FW_BUG		"[Firmware Bug]: "
+#define FW_WARN		"[Firmware Warn]: "
+#define FW_INFO		"[Firmware Info]: "
+
+/*
+ * HW_ERR
+ * Add this to a message for hardware errors, so that user can report
+ * it to hardware vendor instead of LKML or software vendor.
+ */
+#define HW_ERR		"[Hardware Error]: "
+
+#ifdef CONFIG_PRINTK
+asmlinkage int vprintk(const char *fmt, va_list args)
+	__attribute__ ((format (printf, 1, 0)));
+asmlinkage int printk(const char * fmt, ...)
+	__attribute__ ((format (printf, 1, 2))) __cold;
+
+/*
+ * Please don't use printk_ratelimit(), because it shares ratelimiting state
+ * with all other unrelated printk_ratelimit() callsites.  Instead use
+ * printk_ratelimited() or plain old __ratelimit().
+ */
+extern int __printk_ratelimit(const char *func);
+#define printk_ratelimit() __printk_ratelimit(__func__)
+extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
+				   unsigned int interval_msec);
+
+extern int printk_delay_msec;
+extern int dmesg_restrict;
+
+/*
+ * Print a one-time message (analogous to WARN_ONCE() et al):
+ */
+#define printk_once(x...) ({			\
+	static bool __print_once;		\
+						\
+	if (!__print_once) {			\
+		__print_once = true;		\
+		printk(x);			\
+	}					\
+})
+
+void log_buf_kexec_setup(void);
+#else
+static inline int vprintk(const char *s, va_list args)
+	__attribute__ ((format (printf, 1, 0)));
+static inline int vprintk(const char *s, va_list args) { return 0; }
+static inline int printk(const char *s, ...)
+	__attribute__ ((format (printf, 1, 2)));
+static inline int __cold printk(const char *s, ...) { return 0; }
+static inline int printk_ratelimit(void) { return 0; }
+static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
+					  unsigned int interval_msec)	\
+		{ return false; }
+
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_once(x...) printk(x)
+
+static inline void log_buf_kexec_setup(void)
+{
+}
+#endif
+
+/*
+ * Dummy printk for disabled debugging statements to use whilst maintaining
+ * gcc's format and side-effect checking.
+ */
+static inline __attribute__ ((format (printf, 1, 2)))
+int no_printk(const char *s, ...) { return 0; }
+
+extern int printk_needs_cpu(int cpu);
+extern void printk_tick(void);
+
+extern void asmlinkage __attribute__((format(printf, 1, 2)))
+	early_printk(const char *fmt, ...);
+
+static inline void console_silent(void)
+{
+	console_loglevel = 0;
+}
+
+static inline void console_verbose(void)
+{
+	if (console_loglevel)
+		console_loglevel = 15;
+}
+
+extern void dump_stack(void) __cold;
+
+enum {
+	DUMP_PREFIX_NONE,
+	DUMP_PREFIX_ADDRESS,
+	DUMP_PREFIX_OFFSET
+};
+extern void hex_dump_to_buffer(const void *buf, size_t len,
+				int rowsize, int groupsize,
+				char *linebuf, size_t linebuflen, bool ascii);
+extern void print_hex_dump(const char *level, const char *prefix_str,
+				int prefix_type, int rowsize, int groupsize,
+				const void *buf, size_t len, bool ascii);
+extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
+			const void *buf, size_t len);
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) fmt
+#endif
+
+#define pr_emerg(fmt, ...) \
+        printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert(fmt, ...) \
+        printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit(fmt, ...) \
+        printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err(fmt, ...) \
+        printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning(fmt, ...) \
+        printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn pr_warning
+#define pr_notice(fmt, ...) \
+        printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info(fmt, ...) \
+        printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_cont(fmt, ...) \
+	printk(KERN_CONT fmt, ##__VA_ARGS__)
+
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug(fmt, ...) \
+	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#elif defined(CONFIG_DYNAMIC_DEBUG)
+/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
+#define pr_debug(fmt, ...) \
+	dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#else
+#define pr_debug(fmt, ...) \
+	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
+/*
+ * ratelimited messages with local ratelimit_state,
+ * no local ratelimit_state used in the !PRINTK case
+ */
+#ifdef CONFIG_PRINTK
+#define printk_ratelimited(fmt, ...)  ({				\
+	static DEFINE_RATELIMIT_STATE(_rs,				\
+				      DEFAULT_RATELIMIT_INTERVAL,	\
+				      DEFAULT_RATELIMIT_BURST);		\
+									\
+	if (__ratelimit(&_rs))						\
+		printk(fmt, ##__VA_ARGS__);				\
+})
+#else
+/* No effect, but we still get type checking even in the !PRINTK case: */
+#define printk_ratelimited printk
+#endif
+
+#define pr_emerg_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_alert_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_crit_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_err_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warn_ratelimited pr_warning_ratelimited
+#define pr_notice_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_info_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
+/* no pr_cont_ratelimited, don't do that... */
+/* If you are writing a driver, please use dev_dbg instead */
+#if defined(DEBUG)
+#define pr_debug_ratelimited(fmt, ...) \
+	printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_debug_ratelimited(fmt, ...) \
+	({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
+				     ##__VA_ARGS__); 0; })
+#endif
+
+#endif
diff --git a/include/linux/pwm_backlight.h b/include/linux/pwm_backlight.h
index 01b3d759f1f..e031e1a486d 100644
--- a/include/linux/pwm_backlight.h
+++ b/include/linux/pwm_backlight.h
@@ -8,6 +8,7 @@ struct platform_pwm_backlight_data {
 	int pwm_id;
 	unsigned int max_brightness;
 	unsigned int dft_brightness;
+	unsigned int lth_brightness;
 	unsigned int pwm_period_ns;
 	int (*init)(struct device *dev);
 	int (*notify)(struct device *dev, int brightness);
diff --git a/arch/arm/plat-pxa/include/plat/ssp.h b/include/linux/pxa2xx_ssp.h
index fe43150690e..2f691e4e622 100644
--- a/arch/arm/plat-pxa/include/plat/ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -1,5 +1,5 @@
 /*
- *  ssp.h
+ *  pxa2xx_ssp.h
  *
  *  Copyright (C) 2003 Russell King, All Rights Reserved.
  *
@@ -16,8 +16,8 @@
  *       PXA3xx     SSP1, SSP2, SSP3, SSP4
  */
 
-#ifndef __ASM_ARCH_SSP_H
-#define __ASM_ARCH_SSP_H
+#ifndef __LINUX_SSP_H
+#define __LINUX_SSP_H
 
 #include <linux/list.h>
 #include <linux/io.h>
@@ -71,11 +71,8 @@
 #define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
 #define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
 #define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
-#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
-#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
-#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
-#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
 
+#define SSSR_ALT_FRM_MASK	3	/* Masks the SFRM signal number */
 #define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
 #define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
 #define SSSR_BSY	(1 << 4)	/* SSP Busy */
@@ -83,6 +80,31 @@
 #define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
 #define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
 
+#ifdef CONFIG_ARCH_PXA
+#define RX_THRESH_DFLT	8
+#define TX_THRESH_DFLT	8
+
+#define SSSR_TFL_MASK	(0xf << 8)	/* Transmit FIFO Level mask */
+#define SSSR_RFL_MASK	(0xf << 12)	/* Receive FIFO Level mask */
+
+#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#else
+
+#define RX_THRESH_DFLT	2
+#define TX_THRESH_DFLT	2
+
+#define SSSR_TFL_MASK	(0x3 << 8)	/* Transmit FIFO Level mask */
+#define SSSR_RFL_MASK	(0x3 << 12)	/* Receive FIFO Level mask */
+
+#define SSCR1_TFT	(0x000000c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
+#define SSCR1_RFT	(0x00000c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
+#endif
 
 /* extra bits in PXA255, PXA26x and PXA27x SSP ports */
 #define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
@@ -139,6 +161,7 @@ enum pxa_ssp_type {
 	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
 	PXA27x_SSP,
 	PXA168_SSP,
+	CE4100_SSP,
 };
 
 struct ssp_device {
@@ -183,4 +206,4 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
 
 struct ssp_device *pxa_ssp_request(int port, const char *label);
 void pxa_ssp_free(struct ssp_device *);
-#endif /* __ASM_ARCH_SSP_H */
+#endif
diff --git a/include/linux/radix-tree.h b/include/linux/radix-tree.h
index a39cbed9ee1..ab2baa5c488 100644
--- a/include/linux/radix-tree.h
+++ b/include/linux/radix-tree.h
@@ -34,19 +34,13 @@
  * needed for RCU lookups (because root->height is unreliable). The only
  * time callers need worry about this is when doing a lookup_slot under
  * RCU.
+ *
+ * Indirect pointer in fact is also used to tag the last pointer of a node
+ * when it is shrunk, before we rcu free the node. See shrink code for
+ * details.
  */
 #define RADIX_TREE_INDIRECT_PTR	1
-#define RADIX_TREE_RETRY ((void *)-1UL)
-
-static inline void *radix_tree_ptr_to_indirect(void *ptr)
-{
-	return (void *)((unsigned long)ptr | RADIX_TREE_INDIRECT_PTR);
-}
 
-static inline void *radix_tree_indirect_to_ptr(void *ptr)
-{
-	return (void *)((unsigned long)ptr & ~RADIX_TREE_INDIRECT_PTR);
-}
 #define radix_tree_indirect_to_ptr(ptr) \
 	radix_tree_indirect_to_ptr((void __force *)(ptr))
 
@@ -140,16 +134,29 @@ do {									\
  *		removed.
  *
  * For use with radix_tree_lookup_slot().  Caller must hold tree at least read
- * locked across slot lookup and dereference.  More likely, will be used with
- * radix_tree_replace_slot(), as well, so caller will hold tree write locked.
+ * locked across slot lookup and dereference. Not required if write lock is
+ * held (ie. items cannot be concurrently inserted).
+ *
+ * radix_tree_deref_retry must be used to confirm validity of the pointer if
+ * only the read lock is held.
  */
 static inline void *radix_tree_deref_slot(void **pslot)
 {
-	void *ret = rcu_dereference(*pslot);
-	if (unlikely(radix_tree_is_indirect_ptr(ret)))
-		ret = RADIX_TREE_RETRY;
-	return ret;
+	return rcu_dereference(*pslot);
 }
+
+/**
+ * radix_tree_deref_retry	- check radix_tree_deref_slot
+ * @arg:	pointer returned by radix_tree_deref_slot
+ * Returns:	0 if retry is not required, otherwise retry is required
+ *
+ * radix_tree_deref_retry must be used with radix_tree_deref_slot.
+ */
+static inline int radix_tree_deref_retry(void *arg)
+{
+	return unlikely((unsigned long)arg & RADIX_TREE_INDIRECT_PTR);
+}
+
 /**
  * radix_tree_replace_slot	- replace item in a slot
  * @pslot:	pointer to slot, returned by radix_tree_lookup_slot
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index f31ef61f1c6..2dea94fc440 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -241,11 +241,6 @@ static inline void list_splice_init_rcu(struct list_head *list,
 #define list_first_entry_rcu(ptr, type, member) \
 	list_entry_rcu((ptr)->next, type, member)
 
-#define __list_for_each_rcu(pos, head) \
-	for (pos = rcu_dereference_raw(list_next_rcu(head)); \
-		pos != (head); \
-		pos = rcu_dereference_raw(list_next_rcu((pos)))
-
 /**
  * list_for_each_entry_rcu	-	iterate over rcu list of given type
  * @pos:	the type * to use as a loop cursor.
diff --git a/include/linux/rculist_bl.h b/include/linux/rculist_bl.h
new file mode 100644
index 00000000000..b872b493724
--- /dev/null
+++ b/include/linux/rculist_bl.h
@@ -0,0 +1,127 @@
+#ifndef _LINUX_RCULIST_BL_H
+#define _LINUX_RCULIST_BL_H
+
+/*
+ * RCU-protected bl list version. See include/linux/list_bl.h.
+ */
+#include <linux/list_bl.h>
+#include <linux/rcupdate.h>
+
+static inline void hlist_bl_set_first_rcu(struct hlist_bl_head *h,
+					struct hlist_bl_node *n)
+{
+	LIST_BL_BUG_ON((unsigned long)n & LIST_BL_LOCKMASK);
+	LIST_BL_BUG_ON(!((unsigned long)h->first & LIST_BL_LOCKMASK));
+	rcu_assign_pointer(h->first,
+		(struct hlist_bl_node *)((unsigned long)n | LIST_BL_LOCKMASK));
+}
+
+static inline struct hlist_bl_node *hlist_bl_first_rcu(struct hlist_bl_head *h)
+{
+	return (struct hlist_bl_node *)
+		((unsigned long)rcu_dereference(h->first) & ~LIST_BL_LOCKMASK);
+}
+
+/**
+ * hlist_bl_del_init_rcu - deletes entry from hash list with re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: hlist_bl_unhashed() on the node returns true after this. It is
+ * useful for RCU based read lockfree traversal if the writer side
+ * must know if the list entry is still hashed or already unhashed.
+ *
+ * In particular, it means that we can not poison the forward pointers
+ * that may still be used for walking the hash list and we can only
+ * zero the pprev pointer so list_unhashed() will return true after
+ * this.
+ *
+ * The caller must take whatever precautions are necessary (such as
+ * holding appropriate locks) to avoid racing with another
+ * list-mutation primitive, such as hlist_bl_add_head_rcu() or
+ * hlist_bl_del_rcu(), running on this same list.  However, it is
+ * perfectly legal to run concurrently with the _rcu list-traversal
+ * primitives, such as hlist_bl_for_each_entry_rcu().
+ */
+static inline void hlist_bl_del_init_rcu(struct hlist_bl_node *n)
+{
+	if (!hlist_bl_unhashed(n)) {
+		__hlist_bl_del(n);
+		n->pprev = NULL;
+	}
+}
+
+/**
+ * hlist_bl_del_rcu - deletes entry from hash list without re-initialization
+ * @n: the element to delete from the hash list.
+ *
+ * Note: hlist_bl_unhashed() on entry does not return true after this,
+ * the entry is in an undefined state. It is useful for RCU based
+ * lockfree traversal.
+ *
+ * In particular, it means that we can not poison the forward
+ * pointers that may still be used for walking the hash list.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_bl_add_head_rcu()
+ * or hlist_bl_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_bl_for_each_entry().
+ */
+static inline void hlist_bl_del_rcu(struct hlist_bl_node *n)
+{
+	__hlist_bl_del(n);
+	n->pprev = LIST_POISON2;
+}
+
+/**
+ * hlist_bl_add_head_rcu
+ * @n: the element to add to the hash list.
+ * @h: the list to add to.
+ *
+ * Description:
+ * Adds the specified element to the specified hlist_bl,
+ * while permitting racing traversals.
+ *
+ * The caller must take whatever precautions are necessary
+ * (such as holding appropriate locks) to avoid racing
+ * with another list-mutation primitive, such as hlist_bl_add_head_rcu()
+ * or hlist_bl_del_rcu(), running on this same list.
+ * However, it is perfectly legal to run concurrently with
+ * the _rcu list-traversal primitives, such as
+ * hlist_bl_for_each_entry_rcu(), used to prevent memory-consistency
+ * problems on Alpha CPUs.  Regardless of the type of CPU, the
+ * list-traversal primitive must be guarded by rcu_read_lock().
+ */
+static inline void hlist_bl_add_head_rcu(struct hlist_bl_node *n,
+					struct hlist_bl_head *h)
+{
+	struct hlist_bl_node *first;
+
+	/* don't need hlist_bl_first_rcu because we're under lock */
+	first = hlist_bl_first(h);
+
+	n->next = first;
+	if (first)
+		first->pprev = &n->next;
+	n->pprev = &h->first;
+
+	/* need _rcu because we can have concurrent lock free readers */
+	hlist_bl_set_first_rcu(h, n);
+}
+/**
+ * hlist_bl_for_each_entry_rcu - iterate over rcu list of given type
+ * @tpos:	the type * to use as a loop cursor.
+ * @pos:	the &struct hlist_bl_node to use as a loop cursor.
+ * @head:	the head for your list.
+ * @member:	the name of the hlist_bl_node within the struct.
+ *
+ */
+#define hlist_bl_for_each_entry_rcu(tpos, pos, head, member)		\
+	for (pos = hlist_bl_first_rcu(head);				\
+		pos &&							\
+		({ tpos = hlist_bl_entry(pos, typeof(*tpos), member); 1; }); \
+		pos = rcu_dereference_raw(pos->next))
+
+#endif
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 03cda7bed98..af561485628 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -47,6 +47,8 @@
 extern int rcutorture_runnable; /* for sysctl */
 #endif /* #ifdef CONFIG_RCU_TORTURE_TEST */
 
+#define UINT_CMP_GE(a, b)	(UINT_MAX / 2 >= (a) - (b))
+#define UINT_CMP_LT(a, b)	(UINT_MAX / 2 < (a) - (b))
 #define ULONG_CMP_GE(a, b)	(ULONG_MAX / 2 >= (a) - (b))
 #define ULONG_CMP_LT(a, b)	(ULONG_MAX / 2 < (a) - (b))
 
@@ -66,7 +68,6 @@ extern void call_rcu_sched(struct rcu_head *head,
 extern void synchronize_sched(void);
 extern void rcu_barrier_bh(void);
 extern void rcu_barrier_sched(void);
-extern void synchronize_sched_expedited(void);
 extern int sched_expedited_torture_stats(char *page);
 
 static inline void __rcu_read_lock_bh(void)
@@ -118,7 +119,6 @@ static inline int rcu_preempt_depth(void)
 #endif /* #else #ifdef CONFIG_PREEMPT_RCU */
 
 /* Internal to kernel */
-extern void rcu_init(void);
 extern void rcu_sched_qs(int cpu);
 extern void rcu_bh_qs(int cpu);
 extern void rcu_check_callbacks(int cpu, int user);
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
index 13877cb93a6..30ebd7c8d87 100644
--- a/include/linux/rcutiny.h
+++ b/include/linux/rcutiny.h
@@ -27,7 +27,9 @@
 
 #include <linux/cache.h>
 
-#define rcu_init_sched()	do { } while (0)
+static inline void rcu_init(void)
+{
+}
 
 #ifdef CONFIG_TINY_RCU
 
@@ -58,6 +60,11 @@ static inline void synchronize_rcu_bh_expedited(void)
 	synchronize_sched();
 }
 
+static inline void synchronize_sched_expedited(void)
+{
+	synchronize_sched();
+}
+
 #ifdef CONFIG_TINY_RCU
 
 static inline void rcu_preempt_note_context_switch(void)
@@ -125,16 +132,12 @@ static inline void rcu_cpu_stall_reset(void)
 }
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
-
 extern int rcu_scheduler_active __read_mostly;
 extern void rcu_scheduler_starting(void);
-
 #else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
-
 static inline void rcu_scheduler_starting(void)
 {
 }
-
 #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
 #endif /* __LINUX_RCUTINY_H */
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 95518e62879..3a933482734 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -30,6 +30,7 @@
 #ifndef __LINUX_RCUTREE_H
 #define __LINUX_RCUTREE_H
 
+extern void rcu_init(void);
 extern void rcu_note_context_switch(int cpu);
 extern int rcu_needs_cpu(int cpu);
 extern void rcu_cpu_stall_reset(void);
@@ -47,6 +48,7 @@ static inline void exit_rcu(void)
 #endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
 
 extern void synchronize_rcu_bh(void);
+extern void synchronize_sched_expedited(void);
 extern void synchronize_rcu_expedited(void);
 
 static inline void synchronize_rcu_bh_expedited(void)
diff --git a/include/linux/reiserfs_fs.h b/include/linux/reiserfs_fs.h
index 5ca47e59b72..c21072adbfa 100644
--- a/include/linux/reiserfs_fs.h
+++ b/include/linux/reiserfs_fs.h
@@ -22,7 +22,6 @@
 #include <asm/unaligned.h>
 #include <linux/bitops.h>
 #include <linux/proc_fs.h>
-#include <linux/smp_lock.h>
 #include <linux/buffer_head.h>
 #include <linux/reiserfs_fs_i.h>
 #include <linux/reiserfs_fs_sb.h>
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index b2cf2089769..3b94c91f20a 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -41,7 +41,7 @@ int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
 int reiserfs_lookup_privroot(struct super_block *sb);
 int reiserfs_delete_xattrs(struct inode *inode);
 int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
-int reiserfs_permission(struct inode *inode, int mask);
+int reiserfs_permission(struct inode *inode, int mask, unsigned int flags);
 
 #ifdef CONFIG_REISERFS_FS_XATTR
 #define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir)
diff --git a/include/linux/resource.h b/include/linux/resource.h
index 88d36f9145b..d01c96c1966 100644
--- a/include/linux/resource.h
+++ b/include/linux/resource.h
@@ -2,6 +2,7 @@
 #define _LINUX_RESOURCE_H
 
 #include <linux/time.h>
+#include <linux/types.h>
 
 /*
  * Resource control/accounting header file for linux
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 08c32e4f261..c6c608482cb 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -354,37 +354,6 @@ static inline bool rfkill_blocked(struct rfkill *rfkill)
 }
 #endif /* RFKILL || RFKILL_MODULE */
 
-
-#ifdef CONFIG_RFKILL_LEDS
-/**
- * rfkill_get_led_trigger_name - Get the LED trigger name for the button's LED.
- * This function might return a NULL pointer if registering of the
- * LED trigger failed. Use this as "default_trigger" for the LED.
- */
-const char *rfkill_get_led_trigger_name(struct rfkill *rfkill);
-
-/**
- * rfkill_set_led_trigger_name -- set the LED trigger name
- * @rfkill: rfkill struct
- * @name: LED trigger name
- *
- * This function sets the LED trigger name of the radio LED
- * trigger that rfkill creates. It is optional, but if called
- * must be called before rfkill_register() to be effective.
- */
-void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name);
-#else
-static inline const char *rfkill_get_led_trigger_name(struct rfkill *rfkill)
-{
-	return NULL;
-}
-
-static inline void
-rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name)
-{
-}
-#endif
-
 #endif /* __KERNEL__ */
 
 #endif /* RFKILL_H */
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index d42f274418b..bbad657a372 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -6,7 +6,6 @@
 #include <linux/if_link.h>
 #include <linux/if_addr.h>
 #include <linux/neighbour.h>
-#include <linux/netdevice.h>
 
 /* rtnetlink families. Values up to 127 are reserved for real address
  * families, values above 128 may be used arbitrarily.
@@ -606,6 +605,7 @@ struct tcamsg {
 #ifdef __KERNEL__
 
 #include <linux/mutex.h>
+#include <linux/netdevice.h>
 
 static __inline__ int rtattr_strcmp(const struct rtattr *rta, const char *str)
 {
diff --git a/include/linux/sched.h b/include/linux/sched.h
index d0036e52a24..341acbbc434 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -143,7 +143,7 @@ extern unsigned long nr_iowait_cpu(int cpu);
 extern unsigned long this_cpu_load(void);
 
 
-extern void calc_global_load(void);
+extern void calc_global_load(unsigned long ticks);
 
 extern unsigned long get_parent_ip(unsigned long addr);
 
@@ -316,6 +316,7 @@ extern int proc_dowatchdog_thresh(struct ctl_table *table, int write,
 				  size_t *lenp, loff_t *ppos);
 extern unsigned int  softlockup_panic;
 extern int softlockup_thresh;
+void lockup_detector_init(void);
 #else
 static inline void touch_softlockup_watchdog(void)
 {
@@ -326,6 +327,9 @@ static inline void touch_softlockup_watchdog_sync(void)
 static inline void touch_all_softlockup_watchdogs(void)
 {
 }
+static inline void lockup_detector_init(void)
+{
+}
 #endif
 
 #ifdef CONFIG_DETECT_HUNG_TASK
@@ -509,6 +513,8 @@ struct thread_group_cputimer {
 	spinlock_t lock;
 };
 
+struct autogroup;
+
 /*
  * NOTE! "signal_struct" does not have it's own
  * locking, because a shared signal_struct always
@@ -576,6 +582,9 @@ struct signal_struct {
 
 	struct tty_struct *tty; /* NULL if no tty */
 
+#ifdef CONFIG_SCHED_AUTOGROUP
+	struct autogroup *autogroup;
+#endif
 	/*
 	 * Cumulative resource counters for dead threads in the group,
 	 * and for reaped dead child processes forked by this group.
@@ -862,6 +871,7 @@ struct sched_group {
 	 * single CPU.
 	 */
 	unsigned int cpu_power, cpu_power_orig;
+	unsigned int group_weight;
 
 	/*
 	 * The CPUs this group covers.
@@ -1228,13 +1238,18 @@ struct task_struct {
 #ifdef CONFIG_TREE_PREEMPT_RCU
 	struct rcu_node *rcu_blocked_node;
 #endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+#ifdef CONFIG_RCU_BOOST
+	struct rt_mutex *rcu_boost_mutex;
+#endif /* #ifdef CONFIG_RCU_BOOST */
 
 #if defined(CONFIG_SCHEDSTATS) || defined(CONFIG_TASK_DELAY_ACCT)
 	struct sched_info sched_info;
 #endif
 
 	struct list_head tasks;
+#ifdef CONFIG_SMP
 	struct plist_node pushable_tasks;
+#endif
 
 	struct mm_struct *mm, *active_mm;
 #if defined(SPLIT_RSS_COUNTING)
@@ -1758,7 +1773,8 @@ extern void thread_group_times(struct task_struct *p, cputime_t *ut, cputime_t *
 #ifdef CONFIG_PREEMPT_RCU
 
 #define RCU_READ_UNLOCK_BLOCKED (1 << 0) /* blocked while in RCU read-side. */
-#define RCU_READ_UNLOCK_NEED_QS (1 << 1) /* RCU core needs CPU response. */
+#define RCU_READ_UNLOCK_BOOSTED (1 << 1) /* boosted while in RCU read-side. */
+#define RCU_READ_UNLOCK_NEED_QS (1 << 2) /* RCU core needs CPU response. */
 
 static inline void rcu_copy_process(struct task_struct *p)
 {
@@ -1766,7 +1782,10 @@ static inline void rcu_copy_process(struct task_struct *p)
 	p->rcu_read_unlock_special = 0;
 #ifdef CONFIG_TREE_PREEMPT_RCU
 	p->rcu_blocked_node = NULL;
-#endif
+#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+#ifdef CONFIG_RCU_BOOST
+	p->rcu_boost_mutex = NULL;
+#endif /* #ifdef CONFIG_RCU_BOOST */
 	INIT_LIST_HEAD(&p->rcu_node_entry);
 }
 
@@ -1871,14 +1890,11 @@ extern void sched_clock_idle_sleep_event(void);
 extern void sched_clock_idle_wakeup_event(u64 delta_ns);
 
 #ifdef CONFIG_HOTPLUG_CPU
-extern void move_task_off_dead_cpu(int dead_cpu, struct task_struct *p);
 extern void idle_task_exit(void);
 #else
 static inline void idle_task_exit(void) {}
 #endif
 
-extern void sched_idle_next(void);
-
 #if defined(CONFIG_NO_HZ) && defined(CONFIG_SMP)
 extern void wake_up_idle_cpu(int cpu);
 #else
@@ -1888,8 +1904,6 @@ static inline void wake_up_idle_cpu(int cpu) { }
 extern unsigned int sysctl_sched_latency;
 extern unsigned int sysctl_sched_min_granularity;
 extern unsigned int sysctl_sched_wakeup_granularity;
-extern unsigned int sysctl_sched_shares_ratelimit;
-extern unsigned int sysctl_sched_shares_thresh;
 extern unsigned int sysctl_sched_child_runs_first;
 
 enum sched_tunable_scaling {
@@ -1905,6 +1919,7 @@ extern unsigned int sysctl_sched_migration_cost;
 extern unsigned int sysctl_sched_nr_migrate;
 extern unsigned int sysctl_sched_time_avg;
 extern unsigned int sysctl_timer_migration;
+extern unsigned int sysctl_sched_shares_window;
 
 int sched_proc_update_handler(struct ctl_table *table, int write,
 		void __user *buffer, size_t *length,
@@ -1930,6 +1945,24 @@ int sched_rt_handler(struct ctl_table *table, int write,
 
 extern unsigned int sysctl_sched_compat_yield;
 
+#ifdef CONFIG_SCHED_AUTOGROUP
+extern unsigned int sysctl_sched_autogroup_enabled;
+
+extern void sched_autogroup_create_attach(struct task_struct *p);
+extern void sched_autogroup_detach(struct task_struct *p);
+extern void sched_autogroup_fork(struct signal_struct *sig);
+extern void sched_autogroup_exit(struct signal_struct *sig);
+#ifdef CONFIG_PROC_FS
+extern void proc_sched_autogroup_show_task(struct task_struct *p, struct seq_file *m);
+extern int proc_sched_autogroup_set_nice(struct task_struct *p, int *nice);
+#endif
+#else
+static inline void sched_autogroup_create_attach(struct task_struct *p) { }
+static inline void sched_autogroup_detach(struct task_struct *p) { }
+static inline void sched_autogroup_fork(struct signal_struct *sig) { }
+static inline void sched_autogroup_exit(struct signal_struct *sig) { }
+#endif
+
 #ifdef CONFIG_RT_MUTEXES
 extern int rt_mutex_getprio(struct task_struct *p);
 extern void rt_mutex_setprio(struct task_struct *p, int prio);
@@ -1948,9 +1981,10 @@ extern int task_nice(const struct task_struct *p);
 extern int can_nice(const struct task_struct *p, const int nice);
 extern int task_curr(const struct task_struct *p);
 extern int idle_cpu(int cpu);
-extern int sched_setscheduler(struct task_struct *, int, struct sched_param *);
+extern int sched_setscheduler(struct task_struct *, int,
+			      const struct sched_param *);
 extern int sched_setscheduler_nocheck(struct task_struct *, int,
-				      struct sched_param *);
+				      const struct sched_param *);
 extern struct task_struct *idle_task(int cpu);
 extern struct task_struct *curr_task(int cpu);
 extern void set_curr_task(int cpu, struct task_struct *p);
@@ -2477,7 +2511,7 @@ extern void normalize_rt_tasks(void);
 
 #ifdef CONFIG_CGROUP_SCHED
 
-extern struct task_group init_task_group;
+extern struct task_group root_task_group;
 
 extern struct task_group *sched_create_group(struct task_group *parent);
 extern void sched_destroy_group(struct task_group *tg);
diff --git a/include/linux/security.h b/include/linux/security.h
index b8246a8df7d..1ac42475ea0 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -77,7 +77,6 @@ extern int cap_task_prctl(int option, unsigned long arg2, unsigned long arg3,
 extern int cap_task_setscheduler(struct task_struct *p);
 extern int cap_task_setioprio(struct task_struct *p, int ioprio);
 extern int cap_task_setnice(struct task_struct *p, int nice);
-extern int cap_syslog(int type, bool from_file);
 extern int cap_vm_enough_memory(struct mm_struct *mm, long pages);
 
 struct msghdr;
@@ -458,7 +457,6 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
  *	called when the actual read/write operations are performed.
  *	@inode contains the inode structure to check.
  *	@mask contains the permission mask.
- *	@nd contains the nameidata (may be NULL).
  *	Return 0 if permission is granted.
  * @inode_setattr:
  *	Check permission before setting file attributes.  Note that the kernel
@@ -797,8 +795,9 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
  * @unix_stream_connect:
  *	Check permissions before establishing a Unix domain stream connection
  *	between @sock and @other.
- *	@sock contains the socket structure.
- *	@other contains the peer socket structure.
+ *	@sock contains the sock structure.
+ *	@other contains the peer sock structure.
+ *	@newsk contains the new sock structure.
  *	Return 0 if permission is granted.
  * @unix_may_send:
  *	Check permissions before connecting or sending datagrams from @sock to
@@ -1388,7 +1387,7 @@ struct security_operations {
 	int (*sysctl) (struct ctl_table *table, int op);
 	int (*quotactl) (int cmds, int type, int id, struct super_block *sb);
 	int (*quota_on) (struct dentry *dentry);
-	int (*syslog) (int type, bool from_file);
+	int (*syslog) (int type);
 	int (*settime) (struct timespec *ts, struct timezone *tz);
 	int (*vm_enough_memory) (struct mm_struct *mm, long pages);
 
@@ -1569,8 +1568,7 @@ struct security_operations {
 	int (*inode_getsecctx)(struct inode *inode, void **ctx, u32 *ctxlen);
 
 #ifdef CONFIG_SECURITY_NETWORK
-	int (*unix_stream_connect) (struct socket *sock,
-				    struct socket *other, struct sock *newsk);
+	int (*unix_stream_connect) (struct sock *sock, struct sock *other, struct sock *newsk);
 	int (*unix_may_send) (struct socket *sock, struct socket *other);
 
 	int (*socket_create) (int family, int type, int protocol, int kern);
@@ -1671,7 +1669,7 @@ int security_real_capable_noaudit(struct task_struct *tsk, int cap);
 int security_sysctl(struct ctl_table *table, int op);
 int security_quotactl(int cmds, int type, int id, struct super_block *sb);
 int security_quota_on(struct dentry *dentry);
-int security_syslog(int type, bool from_file);
+int security_syslog(int type);
 int security_settime(struct timespec *ts, struct timezone *tz);
 int security_vm_enough_memory(long pages);
 int security_vm_enough_memory_mm(struct mm_struct *mm, long pages);
@@ -1714,6 +1712,7 @@ int security_inode_rename(struct inode *old_dir, struct dentry *old_dentry,
 int security_inode_readlink(struct dentry *dentry);
 int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd);
 int security_inode_permission(struct inode *inode, int mask);
+int security_inode_exec_permission(struct inode *inode, unsigned int flags);
 int security_inode_setattr(struct dentry *dentry, struct iattr *attr);
 int security_inode_getattr(struct vfsmount *mnt, struct dentry *dentry);
 int security_inode_setxattr(struct dentry *dentry, const char *name,
@@ -1901,9 +1900,9 @@ static inline int security_quota_on(struct dentry *dentry)
 	return 0;
 }
 
-static inline int security_syslog(int type, bool from_file)
+static inline int security_syslog(int type)
 {
-	return cap_syslog(type, from_file);
+	return 0;
 }
 
 static inline int security_settime(struct timespec *ts, struct timezone *tz)
@@ -2103,6 +2102,12 @@ static inline int security_inode_permission(struct inode *inode, int mask)
 	return 0;
 }
 
+static inline int security_inode_exec_permission(struct inode *inode,
+						  unsigned int flags)
+{
+	return 0;
+}
+
 static inline int security_inode_setattr(struct dentry *dentry,
 					  struct iattr *attr)
 {
@@ -2526,8 +2531,7 @@ static inline int security_inode_getsecctx(struct inode *inode, void **ctx, u32
 
 #ifdef CONFIG_SECURITY_NETWORK
 
-int security_unix_stream_connect(struct socket *sock, struct socket *other,
-				 struct sock *newsk);
+int security_unix_stream_connect(struct sock *sock, struct sock *other, struct sock *newsk);
 int security_unix_may_send(struct socket *sock,  struct socket *other);
 int security_socket_create(int family, int type, int protocol, int kern);
 int security_socket_post_create(struct socket *sock, int family,
@@ -2568,8 +2572,8 @@ void security_tun_dev_post_create(struct sock *sk);
 int security_tun_dev_attach(struct sock *sk);
 
 #else	/* CONFIG_SECURITY_NETWORK */
-static inline int security_unix_stream_connect(struct socket *sock,
-					       struct socket *other,
+static inline int security_unix_stream_connect(struct sock *sock,
+					       struct sock *other,
 					       struct sock *newsk)
 {
 	return 0;
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index 632205ccc25..e98cd2e5719 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -107,7 +107,7 @@ static __always_inline int read_seqretry(const seqlock_t *sl, unsigned start)
 {
 	smp_rmb();
 
-	return (sl->sequence != start);
+	return unlikely(sl->sequence != start);
 }
 
 
@@ -125,14 +125,25 @@ typedef struct seqcount {
 #define SEQCNT_ZERO { 0 }
 #define seqcount_init(x)	do { *(x) = (seqcount_t) SEQCNT_ZERO; } while (0)
 
-/* Start of read using pointer to a sequence counter only.  */
-static inline unsigned read_seqcount_begin(const seqcount_t *s)
+/**
+ * __read_seqcount_begin - begin a seq-read critical section (without barrier)
+ * @s: pointer to seqcount_t
+ * Returns: count to be passed to read_seqcount_retry
+ *
+ * __read_seqcount_begin is like read_seqcount_begin, but has no smp_rmb()
+ * barrier. Callers should ensure that smp_rmb() or equivalent ordering is
+ * provided before actually loading any of the variables that are to be
+ * protected in this critical section.
+ *
+ * Use carefully, only in critical code, and comment how the barrier is
+ * provided.
+ */
+static inline unsigned __read_seqcount_begin(const seqcount_t *s)
 {
 	unsigned ret;
 
 repeat:
 	ret = s->sequence;
-	smp_rmb();
 	if (unlikely(ret & 1)) {
 		cpu_relax();
 		goto repeat;
@@ -140,14 +151,56 @@ repeat:
 	return ret;
 }
 
-/*
- * Test if reader processed invalid data because sequence number has changed.
+/**
+ * read_seqcount_begin - begin a seq-read critical section
+ * @s: pointer to seqcount_t
+ * Returns: count to be passed to read_seqcount_retry
+ *
+ * read_seqcount_begin opens a read critical section of the given seqcount.
+ * Validity of the critical section is tested by checking read_seqcount_retry
+ * function.
+ */
+static inline unsigned read_seqcount_begin(const seqcount_t *s)
+{
+	unsigned ret = __read_seqcount_begin(s);
+	smp_rmb();
+	return ret;
+}
+
+/**
+ * __read_seqcount_retry - end a seq-read critical section (without barrier)
+ * @s: pointer to seqcount_t
+ * @start: count, from read_seqcount_begin
+ * Returns: 1 if retry is required, else 0
+ *
+ * __read_seqcount_retry is like read_seqcount_retry, but has no smp_rmb()
+ * barrier. Callers should ensure that smp_rmb() or equivalent ordering is
+ * provided before actually loading any of the variables that are to be
+ * protected in this critical section.
+ *
+ * Use carefully, only in critical code, and comment how the barrier is
+ * provided.
+ */
+static inline int __read_seqcount_retry(const seqcount_t *s, unsigned start)
+{
+	return unlikely(s->sequence != start);
+}
+
+/**
+ * read_seqcount_retry - end a seq-read critical section
+ * @s: pointer to seqcount_t
+ * @start: count, from read_seqcount_begin
+ * Returns: 1 if retry is required, else 0
+ *
+ * read_seqcount_retry closes a read critical section of the given seqcount.
+ * If the critical section was invalid, it must be ignored (and typically
+ * retried).
  */
 static inline int read_seqcount_retry(const seqcount_t *s, unsigned start)
 {
 	smp_rmb();
 
-	return s->sequence != start;
+	return __read_seqcount_retry(s, start);
 }
 
 
@@ -167,6 +220,19 @@ static inline void write_seqcount_end(seqcount_t *s)
 	s->sequence++;
 }
 
+/**
+ * write_seqcount_barrier - invalidate in-progress read-side seq operations
+ * @s: pointer to seqcount_t
+ *
+ * After write_seqcount_barrier, no read-side seq operations will complete
+ * successfully and see data older than this.
+ */
+static inline void write_seqcount_barrier(seqcount_t *s)
+{
+	smp_wmb();
+	s->sequence+=2;
+}
+
 /*
  * Possible sw/hw IRQ protected versions of the interfaces.
  */
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 212eb4c6779..a23fa29d4eb 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -95,7 +95,7 @@
 /* PPC CPM type number */
 #define PORT_CPM        58
 
-/* MPC52xx type numbers */
+/* MPC52xx (and MPC512x) type numbers */
 #define PORT_MPC52xx	59
 
 /* IBM icom */
@@ -199,6 +199,9 @@
 /* TI OMAP-UART */
 #define PORT_OMAP	96
 
+/* VIA VT8500 SoC */
+#define PORT_VT8500	97
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
@@ -311,6 +314,7 @@ struct uart_port {
 #define UPIO_TSI		(5)			/* Tsi108/109 type IO */
 #define UPIO_DWAPB		(6)			/* DesignWare APB UART */
 #define UPIO_RM9000		(7)			/* RM9000 type IO */
+#define UPIO_DWAPB32		(8)			/* DesignWare APB UART (32 bit accesses) */
 
 	unsigned int		read_status_mask;	/* driver specific */
 	unsigned int		ignore_status_mask;	/* driver specific */
@@ -361,6 +365,7 @@ struct uart_port {
 	struct device		*dev;			/* parent device */
 	unsigned char		hub6;			/* this should be in the 8250 driver */
 	unsigned char		suspended;
+	unsigned char		irq_wake;
 	unsigned char		unused[2];
 	void			*private_data;		/* generic platform data pointer */
 };
diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h
index c7a0ce11cd4..3ecb71a9e50 100644
--- a/include/linux/serial_reg.h
+++ b/include/linux/serial_reg.h
@@ -99,6 +99,13 @@
 #define UART_LCR_WLEN7		0x02 /* Wordlength: 7 bits */
 #define UART_LCR_WLEN8		0x03 /* Wordlength: 8 bits */
 
+/*
+ * Access to some registers depends on register access / configuration
+ * mode.
+ */
+#define UART_LCR_CONF_MODE_A	UART_LCR_DLAB	/* Configutation mode A */
+#define UART_LCR_CONF_MODE_B	0xBF		/* Configutation mode B */
+
 #define UART_MCR	4	/* Out: Modem Control Register */
 #define UART_MCR_CLKSEL		0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
 #define UART_MCR_TCRTLR		0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
@@ -341,5 +348,17 @@
 #define UART_OMAP_SYSS		0x16	/* System status register */
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
+/*
+ * These are the definitions for the MDR1 register
+ */
+#define UART_OMAP_MDR1_16X_MODE		0x00	/* UART 16x mode */
+#define UART_OMAP_MDR1_SIR_MODE		0x01	/* SIR mode */
+#define UART_OMAP_MDR1_16X_ABAUD_MODE	0x02	/* UART 16x auto-baud */
+#define UART_OMAP_MDR1_13X_MODE		0x03	/* UART 13x mode */
+#define UART_OMAP_MDR1_MIR_MODE		0x04	/* MIR mode */
+#define UART_OMAP_MDR1_FIR_MODE		0x05	/* FIR mode */
+#define UART_OMAP_MDR1_CIR_MODE		0x06	/* CIR mode */
+#define UART_OMAP_MDR1_DISABLE		0x07	/* Disable (default state) */
+
 #endif /* _LINUX_SERIAL_REG_H */
 
diff --git a/include/linux/sfi.h b/include/linux/sfi.h
index 7f770c638e9..fe817918b30 100644
--- a/include/linux/sfi.h
+++ b/include/linux/sfi.h
@@ -77,6 +77,8 @@
 #define SFI_OEM_ID_SIZE		6
 #define SFI_OEM_TABLE_ID_SIZE	8
 
+#define SFI_NAME_LEN		16
+
 #define SFI_SYST_SEARCH_BEGIN		0x000E0000
 #define SFI_SYST_SEARCH_END		0x000FFFFF
 
@@ -156,13 +158,13 @@ struct sfi_device_table_entry {
 	u16	addr;
 	u8	irq;
 	u32	max_freq;
-	char	name[16];
+	char	name[SFI_NAME_LEN];
 } __packed;
 
 struct sfi_gpio_table_entry {
-	char	controller_name[16];
+	char	controller_name[SFI_NAME_LEN];
 	u16	pin_no;
-	char	pin_name[16];
+	char	pin_name[SFI_NAME_LEN];
 } __packed;
 
 typedef int (*sfi_table_handler) (struct sfi_table_header *table);
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index cea0c38e7a6..9a52f72527d 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -19,11 +19,13 @@ struct clk_mapping {
 };
 
 struct clk_ops {
+#ifdef CONFIG_SH_CLK_CPG_LEGACY
 	void (*init)(struct clk *clk);
+#endif
 	int (*enable)(struct clk *clk);
 	void (*disable)(struct clk *clk);
 	unsigned long (*recalc)(struct clk *clk);
-	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+	int (*set_rate)(struct clk *clk, unsigned long rate);
 	int (*set_parent)(struct clk *clk, struct clk *parent);
 	long (*round_rate)(struct clk *clk, unsigned long rate);
 };
@@ -67,36 +69,6 @@ int clk_register(struct clk *);
 void clk_unregister(struct clk *);
 void clk_enable_init_clocks(void);
 
-/**
- * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
- * @clk: clock source
- * @rate: desired clock rate in Hz
- * @algo_id: algorithm id to be passed down to ops->set_rate
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
-
-enum clk_sh_algo_id {
-	NO_CHANGE = 0,
-
-	IUS_N1_N1,
-	IUS_322,
-	IUS_522,
-	IUS_N11,
-
-	SB_N1,
-
-	SB3_N1,
-	SB3_32,
-	SB3_43,
-	SB3_54,
-
-	BP_N1,
-
-	IP_N1,
-};
-
 struct clk_div_mult_table {
 	unsigned int *divisors;
 	unsigned int nr_divisors;
diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index f656d1a43dc..5812fefbced 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -79,7 +79,7 @@ struct intc_hw_desc {
 	unsigned int nr_subgroups;
 };
 
-#define _INTC_ARRAY(a) a, a == NULL ? 0 : sizeof(a)/sizeof(*a)
+#define _INTC_ARRAY(a) a, __same_type(a, NULL) ? 0 : sizeof(a)/sizeof(*a)
 
 #define INTC_HW_DESC(vectors, groups, mask_regs,	\
 		     prio_regs,	sense_regs, ack_regs)	\
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 4f2db79a2ab..bf221d65d9a 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -393,9 +393,10 @@ struct sk_buff {
 #else
 	__u8			deliver_no_wcard:1;
 #endif
+	__u8			ooo_okay:1;
 	kmemcheck_bitfield_end(flags2);
 
-	/* 0/14 bit hole */
+	/* 0/13 bit hole */
 
 #ifdef CONFIG_NET_DMA
 	dma_cookie_t		dma_cookie;
@@ -1361,6 +1362,11 @@ static inline void skb_set_mac_header(struct sk_buff *skb, const int offset)
 }
 #endif /* NET_SKBUFF_DATA_USES_OFFSET */
 
+static inline int skb_checksum_start_offset(const struct sk_buff *skb)
+{
+	return skb->csum_start - skb_headroom(skb);
+}
+
 static inline int skb_transport_offset(const struct sk_buff *skb)
 {
 	return skb_transport_header(skb) - skb->data;
@@ -2179,8 +2185,9 @@ static inline bool skb_rx_queue_recorded(const struct sk_buff *skb)
 	return skb->queue_mapping != 0;
 }
 
-extern u16 skb_tx_hash(const struct net_device *dev,
-		       const struct sk_buff *skb);
+extern u16 __skb_tx_hash(const struct net_device *dev,
+			 const struct sk_buff *skb,
+			 unsigned int num_tx_queues);
 
 #ifdef CONFIG_XFRM
 static inline struct sec_path *skb_sec_path(struct sk_buff *skb)
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 59260e21bdf..fa9086647eb 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -106,8 +106,6 @@ int kmem_cache_shrink(struct kmem_cache *);
 void kmem_cache_free(struct kmem_cache *, void *);
 unsigned int kmem_cache_size(struct kmem_cache *);
 const char *kmem_cache_name(struct kmem_cache *);
-int kern_ptr_validate(const void *ptr, unsigned long size);
-int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr);
 
 /*
  * Please use this macro to create slab caches. Simply specify the
diff --git a/include/linux/smp_lock.h b/include/linux/smp_lock.h
index 291f721144c..3a198820273 100644
--- a/include/linux/smp_lock.h
+++ b/include/linux/smp_lock.h
@@ -4,8 +4,6 @@
 #ifdef CONFIG_LOCK_KERNEL
 #include <linux/sched.h>
 
-#define kernel_locked()		(current->lock_depth >= 0)
-
 extern int __lockfunc __reacquire_kernel_lock(void);
 extern void __lockfunc __release_kernel_lock(void);
 
@@ -58,7 +56,6 @@ static inline void cycle_kernel_lock(void)
 #define lock_kernel()
 #define unlock_kernel()
 #define cycle_kernel_lock()			do { } while(0)
-#define kernel_locked()				1
 #endif /* CONFIG_BKL */
 
 #define release_kernel_lock(task)		do { } while(0)
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index ebb0c80ffd6..12b2b18e50c 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -230,6 +230,7 @@ enum
 	LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
 	LINUX_MIB_TCPDEFERACCEPTDROP,
 	LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
+	LINUX_MIB_TCPTIMEWAITOVERFLOW,		/* TCPTimeWaitOverflow */
 	__LINUX_MIB_MAX
 };
 
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 86b652fabf6..5f65f14c4f4 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -30,12 +30,10 @@ struct cred;
 #define __sockaddr_check_size(size)	\
 	BUILD_BUG_ON(((size) > sizeof(struct __kernel_sockaddr_storage)))
 
-#ifdef __KERNEL__
-# ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PROC_FS
 struct seq_file;
 extern void socket_seq_show(struct seq_file *seq);
-# endif
-#endif /* __KERNEL__ */
+#endif
 
 typedef unsigned short	sa_family_t;
 
@@ -311,7 +309,6 @@ struct ucred {
 /* IPX options */
 #define IPX_TYPE	1
 
-#ifdef __KERNEL__
 extern void cred_to_ucred(struct pid *pid, const struct cred *cred, struct ucred *ucred);
 
 extern int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
@@ -333,6 +330,5 @@ struct timespec;
 
 extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
 			  unsigned int flags, struct timespec *timeout);
-#endif
 #endif /* not kernel and not glibc */
 #endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/spi/dw_spi.h b/include/linux/spi/dw_spi.h
index c91302f3a25..6cd10f6ad47 100644
--- a/include/linux/spi/dw_spi.h
+++ b/include/linux/spi/dw_spi.h
@@ -1,5 +1,6 @@
 #ifndef DW_SPI_HEADER_H
 #define DW_SPI_HEADER_H
+
 #include <linux/io.h>
 
 /* Bit fields in CTRLR0 */
@@ -82,6 +83,13 @@ struct dw_spi_reg {
 				though only low 16 bits matters */
 } __packed;
 
+struct dw_spi;
+struct dw_spi_dma_ops {
+	int (*dma_init)(struct dw_spi *dws);
+	void (*dma_exit)(struct dw_spi *dws);
+	int (*dma_transfer)(struct dw_spi *dws, int cs_change);
+};
+
 struct dw_spi {
 	struct spi_master	*master;
 	struct spi_device	*cur_dev;
@@ -136,13 +144,15 @@ struct dw_spi {
 	/* Dma info */
 	int			dma_inited;
 	struct dma_chan		*txchan;
+	struct scatterlist	tx_sgl;
 	struct dma_chan		*rxchan;
-	int			txdma_done;
-	int			rxdma_done;
-	u64			tx_param;
-	u64			rx_param;
+	struct scatterlist	rx_sgl;
+	int			dma_chan_done;
 	struct device		*dma_dev;
-	dma_addr_t		dma_addr;
+	dma_addr_t		dma_addr; /* phy address of the Data register */
+	struct dw_spi_dma_ops	*dma_ops;
+	void			*dma_priv; /* platform relate info */
+	struct pci_dev		*dmac;
 
 	/* Bus interface info */
 	void			*priv;
@@ -216,4 +226,8 @@ extern int dw_spi_add_host(struct dw_spi *dws);
 extern void dw_spi_remove_host(struct dw_spi *dws);
 extern int dw_spi_suspend_host(struct dw_spi *dws);
 extern int dw_spi_resume_host(struct dw_spi *dws);
+extern void dw_spi_xfer_done(struct dw_spi *dws);
+
+/* platform related setup */
+extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
 #endif /* DW_SPI_HEADER_H */
diff --git a/include/linux/spi/ifx_modem.h b/include/linux/spi/ifx_modem.h
new file mode 100644
index 00000000000..a68f3b19d11
--- /dev/null
+++ b/include/linux/spi/ifx_modem.h
@@ -0,0 +1,14 @@
+#ifndef LINUX_IFX_MODEM_H
+#define LINUX_IFX_MODEM_H
+
+struct ifx_modem_platform_data {
+	unsigned short rst_out; /* modem reset out */
+	unsigned short pwr_on;  /* power on */
+	unsigned short rst_pmu; /* reset modem */
+	unsigned short tx_pwr;  /* modem power threshold */
+	unsigned short srdy;    /* SRDY */
+	unsigned short mrdy;    /* MRDY */
+	unsigned short is_6160;	/* Modem type */
+};
+
+#endif
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
new file mode 100644
index 00000000000..d3e1075f7b6
--- /dev/null
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __linux_pxa2xx_spi_h
+#define __linux_pxa2xx_spi_h
+
+#include <linux/pxa2xx_ssp.h>
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+	u32 clock_enable;
+	u16 num_chipselect;
+	u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+	u8 tx_threshold;
+	u8 rx_threshold;
+	u8 dma_burst_size;
+	u32 timeout;
+	u8 enable_loopback;
+	int gpio_cs;
+	void (*cs_control)(u32 command);
+};
+
+#ifdef CONFIG_ARCH_PXA
+
+#include <linux/clk.h>
+#include <mach/dma.h>
+
+extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+
+#else
+/*
+ * This is the implemtation for CE4100 on x86. ARM defines them in mach/ or
+ * plat/ include path.
+ * The CE4100 does not provide DMA support. This bits are here to let the driver
+ * compile and will never be used. Maybe we get DMA support at a later point in
+ * time.
+ */
+
+#define DCSR(n)         (n)
+#define DSADR(n)        (n)
+#define DTADR(n)        (n)
+#define DCMD(n)         (n)
+#define DRCMR(n)        (n)
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable */
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt */
+
+#define DCSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable */
+#define DCSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)	/* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)	/* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)	/* The Descriptor Compare Status */
+#define DCSR_EORINTR	(1 << 9)	/* The end of Receive */
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number */
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor */
+#define DDADR_STOP	(1 << 0)	/* Stop */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+static inline int pxa_request_dma(char *name,
+		pxa_dma_prio prio,
+		void (*irq_handler)(int, void *),
+		void *data)
+{
+	return -ENODEV;
+}
+
+static inline void pxa_free_dma(int dma_ch)
+{
+}
+
+/*
+ * The CE4100 does not have the clk framework implemented and SPI clock can
+ * not be switched on/off or the divider changed.
+ */
+static inline void clk_disable(struct clk *clk)
+{
+}
+
+static inline int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static inline unsigned long clk_get_rate(struct clk *clk)
+{
+	return 3686400;
+}
+
+#endif
+#endif
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 623b704fdc4..9659eff52ca 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -55,6 +55,10 @@ struct ssb_sprom {
 	u8 tri5gl;		/* 5.2GHz TX isolation */
 	u8 tri5g;		/* 5.3GHz TX isolation */
 	u8 tri5gh;		/* 5.8GHz TX isolation */
+	u8 txpid2g[4];		/* 2GHz TX power index */
+	u8 txpid5gl[4];		/* 4.9 - 5.1GHz TX power index */
+	u8 txpid5g[4];		/* 5.1 - 5.5GHz TX power index */
+	u8 txpid5gh[4];		/* 5.5 - ...GHz TX power index */
 	u8 rxpo2g;		/* 2GHz RX power offset */
 	u8 rxpo5g;		/* 5GHz RX power offset */
 	u8 rssisav2g;		/* 2GHz RSSI params */
diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h
index 942e3873690..eba52a10053 100644
--- a/include/linux/ssb/ssb_driver_gige.h
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -96,16 +96,21 @@ static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
 	return 0;
 }
 
-extern char * nvram_get(const char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
 /* Get the device MAC address */
 static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
 {
-#ifdef CONFIG_BCM47XX
-	char *res = nvram_get("et0macaddr");
-	if (res)
-		memcpy(macaddr, res, 6);
-#endif
+	char buf[20];
+	if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+		return;
+	nvram_parse_macaddr(buf, macaddr);
 }
+#else
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+}
+#endif
 
 extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
 					  struct pci_dev *pdev);
diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h
index 11daf9c140e..489f7b6d61c 100644
--- a/include/linux/ssb/ssb_regs.h
+++ b/include/linux/ssb/ssb_regs.h
@@ -299,6 +299,46 @@
 #define  SSB_SPROM4_AGAIN2_SHIFT	0
 #define  SSB_SPROM4_AGAIN3		0xFF00	/* Antenna 3 */
 #define  SSB_SPROM4_AGAIN3_SHIFT	8
+#define SSB_SPROM4_TXPID2G01		0x0062 	/* TX Power Index 2GHz */
+#define  SSB_SPROM4_TXPID2G0		0x00FF
+#define  SSB_SPROM4_TXPID2G0_SHIFT	0
+#define  SSB_SPROM4_TXPID2G1		0xFF00
+#define  SSB_SPROM4_TXPID2G1_SHIFT	8
+#define SSB_SPROM4_TXPID2G23		0x0064 	/* TX Power Index 2GHz */
+#define  SSB_SPROM4_TXPID2G2		0x00FF
+#define  SSB_SPROM4_TXPID2G2_SHIFT	0
+#define  SSB_SPROM4_TXPID2G3		0xFF00
+#define  SSB_SPROM4_TXPID2G3_SHIFT	8
+#define SSB_SPROM4_TXPID5G01		0x0066 	/* TX Power Index 5GHz middle subband */
+#define  SSB_SPROM4_TXPID5G0		0x00FF
+#define  SSB_SPROM4_TXPID5G0_SHIFT	0
+#define  SSB_SPROM4_TXPID5G1		0xFF00
+#define  SSB_SPROM4_TXPID5G1_SHIFT	8
+#define SSB_SPROM4_TXPID5G23		0x0068 	/* TX Power Index 5GHz middle subband */
+#define  SSB_SPROM4_TXPID5G2		0x00FF
+#define  SSB_SPROM4_TXPID5G2_SHIFT	0
+#define  SSB_SPROM4_TXPID5G3		0xFF00
+#define  SSB_SPROM4_TXPID5G3_SHIFT	8
+#define SSB_SPROM4_TXPID5GL01		0x006A 	/* TX Power Index 5GHz low subband */
+#define  SSB_SPROM4_TXPID5GL0		0x00FF
+#define  SSB_SPROM4_TXPID5GL0_SHIFT	0
+#define  SSB_SPROM4_TXPID5GL1		0xFF00
+#define  SSB_SPROM4_TXPID5GL1_SHIFT	8
+#define SSB_SPROM4_TXPID5GL23		0x006C 	/* TX Power Index 5GHz low subband */
+#define  SSB_SPROM4_TXPID5GL2		0x00FF
+#define  SSB_SPROM4_TXPID5GL2_SHIFT	0
+#define  SSB_SPROM4_TXPID5GL3		0xFF00
+#define  SSB_SPROM4_TXPID5GL3_SHIFT	8
+#define SSB_SPROM4_TXPID5GH01		0x006E 	/* TX Power Index 5GHz high subband */
+#define  SSB_SPROM4_TXPID5GH0		0x00FF
+#define  SSB_SPROM4_TXPID5GH0_SHIFT	0
+#define  SSB_SPROM4_TXPID5GH1		0xFF00
+#define  SSB_SPROM4_TXPID5GH1_SHIFT	8
+#define SSB_SPROM4_TXPID5GH23		0x0070 	/* TX Power Index 5GHz high subband */
+#define  SSB_SPROM4_TXPID5GH2		0x00FF
+#define  SSB_SPROM4_TXPID5GH2_SHIFT	0
+#define  SSB_SPROM4_TXPID5GH3		0xFF00
+#define  SSB_SPROM4_TXPID5GH3_SHIFT	8
 #define SSB_SPROM4_MAXP_BG		0x0080  /* Max Power BG in path 1 */
 #define  SSB_SPROM4_MAXP_BG_MASK	0x00FF  /* Mask for Max Power BG */
 #define  SSB_SPROM4_ITSSI_BG		0xFF00	/* Mask for path 1 itssi_bg */
diff --git a/include/linux/stacktrace.h b/include/linux/stacktrace.h
index 51efbef38fb..25310f1d7f3 100644
--- a/include/linux/stacktrace.h
+++ b/include/linux/stacktrace.h
@@ -2,6 +2,7 @@
 #define __LINUX_STACKTRACE_H
 
 struct task_struct;
+struct pt_regs;
 
 #ifdef CONFIG_STACKTRACE
 struct task_struct;
@@ -13,7 +14,8 @@ struct stack_trace {
 };
 
 extern void save_stack_trace(struct stack_trace *trace);
-extern void save_stack_trace_bp(struct stack_trace *trace, unsigned long bp);
+extern void save_stack_trace_regs(struct stack_trace *trace,
+				  struct pt_regs *regs);
 extern void save_stack_trace_tsk(struct task_struct *tsk,
 				struct stack_trace *trace);
 
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index d66c61774d9..e1035291569 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -40,9 +40,9 @@ struct plat_stmmacenet_data {
 	int pmt;
 	void (*fix_mac_speed)(void *priv, unsigned int speed);
 	void (*bus_setup)(void __iomem *ioaddr);
-#ifdef CONFIG_STM_DRIVERS
-	struct stm_pad_config *pad_config;
-#endif
+	int (*init)(struct platform_device *pdev);
+	void (*exit)(struct platform_device *pdev);
+	void *custom_cfg;
 	void *bsp_priv;
 };
 
diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h
index bbdb680ffbe..aea0d438e3c 100644
--- a/include/linux/sunrpc/svc_xprt.h
+++ b/include/linux/sunrpc/svc_xprt.h
@@ -82,18 +82,28 @@ struct svc_xprt {
 	struct net		*xpt_net;
 };
 
-static inline void register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
+static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
 {
 	spin_lock(&xpt->xpt_lock);
-	list_add(&u->list, &xpt->xpt_users);
+	list_del_init(&u->list);
 	spin_unlock(&xpt->xpt_lock);
 }
 
-static inline void unregister_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
+static inline int register_xpt_user(struct svc_xprt *xpt, struct svc_xpt_user *u)
 {
 	spin_lock(&xpt->xpt_lock);
-	list_del_init(&u->list);
+	if (test_bit(XPT_CLOSE, &xpt->xpt_flags)) {
+		/*
+		 * The connection is about to be deleted soon (or,
+		 * worse, may already be deleted--in which case we've
+		 * already notified the xpt_users).
+		 */
+		spin_unlock(&xpt->xpt_lock);
+		return -ENOTCONN;
+	}
+	list_add(&u->list, &xpt->xpt_users);
 	spin_unlock(&xpt->xpt_lock);
+	return 0;
 }
 
 int	svc_reg_xprt_class(struct svc_xprt_class *);
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index cacc27a0e28..18cd0684fc4 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -127,8 +127,6 @@ extern struct trace_event_functions exit_syscall_print_funcs;
 #define SYSCALL_TRACE_ENTER_EVENT(sname)				\
 	static struct syscall_metadata					\
 	__attribute__((__aligned__(4))) __syscall_meta_##sname;		\
-	static struct ftrace_event_call					\
-	__attribute__((__aligned__(4))) event_enter_##sname;		\
 	static struct ftrace_event_call __used				\
 	  __attribute__((__aligned__(4)))				\
 	  __attribute__((section("_ftrace_events")))			\
@@ -137,13 +135,12 @@ extern struct trace_event_functions exit_syscall_print_funcs;
 		.class			= &event_class_syscall_enter,	\
 		.event.funcs            = &enter_syscall_print_funcs,	\
 		.data			= (void *)&__syscall_meta_##sname,\
-	}
+	};								\
+	__TRACE_EVENT_FLAGS(enter_##sname, TRACE_EVENT_FL_CAP_ANY)
 
 #define SYSCALL_TRACE_EXIT_EVENT(sname)					\
 	static struct syscall_metadata					\
 	__attribute__((__aligned__(4))) __syscall_meta_##sname;		\
-	static struct ftrace_event_call					\
-	__attribute__((__aligned__(4))) event_exit_##sname;		\
 	static struct ftrace_event_call __used				\
 	  __attribute__((__aligned__(4)))				\
 	  __attribute__((section("_ftrace_events")))			\
@@ -152,7 +149,8 @@ extern struct trace_event_functions exit_syscall_print_funcs;
 		.class			= &event_class_syscall_exit,	\
 		.event.funcs		= &exit_syscall_print_funcs,	\
 		.data			= (void *)&__syscall_meta_##sname,\
-	}
+	};								\
+	__TRACE_EVENT_FLAGS(exit_##sname, TRACE_EVENT_FL_CAP_ANY)
 
 #define SYSCALL_METADATA(sname, nb)				\
 	SYSCALL_TRACE_ENTER_EVENT(sname);			\
diff --git a/include/linux/taskstats.h b/include/linux/taskstats.h
index 341dddb5509..2466e550a41 100644
--- a/include/linux/taskstats.h
+++ b/include/linux/taskstats.h
@@ -33,7 +33,7 @@
  */
 
 
-#define TASKSTATS_VERSION	7
+#define TASKSTATS_VERSION	8
 #define TS_COMM_LEN		32	/* should be >= TASK_COMM_LEN
 					 * in linux/sched.h */
 
@@ -188,6 +188,7 @@ enum {
 	TASKSTATS_TYPE_STATS,		/* taskstats structure */
 	TASKSTATS_TYPE_AGGR_PID,	/* contains pid + stats */
 	TASKSTATS_TYPE_AGGR_TGID,	/* contains tgid + stats */
+	TASKSTATS_TYPE_NULL,		/* contains nothing */
 	__TASKSTATS_TYPE_MAX,
 };
 
diff --git a/include/linux/timer.h b/include/linux/timer.h
index 38cf093ef62..6abd9138bed 100644
--- a/include/linux/timer.h
+++ b/include/linux/timer.h
@@ -24,9 +24,9 @@ struct timer_list {
 	int slack;
 
 #ifdef CONFIG_TIMER_STATS
+	int start_pid;
 	void *start_site;
 	char start_comm[16];
-	int start_pid;
 #endif
 #ifdef CONFIG_LOCKDEP
 	struct lockdep_map lockdep_map;
@@ -48,12 +48,38 @@ extern struct tvec_base boot_tvec_bases;
 #define __TIMER_LOCKDEP_MAP_INITIALIZER(_kn)
 #endif
 
+/*
+ * Note that all tvec_bases are 2 byte aligned and lower bit of
+ * base in timer_list is guaranteed to be zero. Use the LSB to
+ * indicate whether the timer is deferrable.
+ *
+ * A deferrable timer will work normally when the system is busy, but
+ * will not cause a CPU to come out of idle just to service it; instead,
+ * the timer will be serviced when the CPU eventually wakes up with a
+ * subsequent non-deferrable timer.
+ */
+#define TBASE_DEFERRABLE_FLAG		(0x1)
+
 #define TIMER_INITIALIZER(_function, _expires, _data) {		\
 		.entry = { .prev = TIMER_ENTRY_STATIC },	\
 		.function = (_function),			\
 		.expires = (_expires),				\
 		.data = (_data),				\
 		.base = &boot_tvec_bases,			\
+		.slack = -1,					\
+		__TIMER_LOCKDEP_MAP_INITIALIZER(		\
+			__FILE__ ":" __stringify(__LINE__))	\
+	}
+
+#define TBASE_MAKE_DEFERRED(ptr) ((struct tvec_base *)		\
+		  ((unsigned char *)(ptr) + TBASE_DEFERRABLE_FLAG))
+
+#define TIMER_DEFERRED_INITIALIZER(_function, _expires, _data) {\
+		.entry = { .prev = TIMER_ENTRY_STATIC },	\
+		.function = (_function),			\
+		.expires = (_expires),				\
+		.data = (_data),				\
+		.base = TBASE_MAKE_DEFERRED(&boot_tvec_bases),	\
 		__TIMER_LOCKDEP_MAP_INITIALIZER(		\
 			__FILE__ ":" __stringify(__LINE__))	\
 	}
@@ -248,11 +274,11 @@ static inline void timer_stats_timer_clear_start_info(struct timer_list *timer)
 
 extern void add_timer(struct timer_list *timer);
 
+extern int try_to_del_timer_sync(struct timer_list *timer);
+
 #ifdef CONFIG_SMP
-  extern int try_to_del_timer_sync(struct timer_list *timer);
   extern int del_timer_sync(struct timer_list *timer);
 #else
-# define try_to_del_timer_sync(t)	del_timer(t)
 # define del_timer_sync(t)		del_timer(t)
 #endif
 
diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h
new file mode 100644
index 00000000000..d24aabaca47
--- /dev/null
+++ b/include/linux/timerqueue.h
@@ -0,0 +1,50 @@
+#ifndef _LINUX_TIMERQUEUE_H
+#define _LINUX_TIMERQUEUE_H
+
+#include <linux/rbtree.h>
+#include <linux/ktime.h>
+
+
+struct timerqueue_node {
+	struct rb_node node;
+	ktime_t expires;
+};
+
+struct timerqueue_head {
+	struct rb_root head;
+	struct timerqueue_node *next;
+};
+
+
+extern void timerqueue_add(struct timerqueue_head *head,
+				struct timerqueue_node *node);
+extern void timerqueue_del(struct timerqueue_head *head,
+				struct timerqueue_node *node);
+extern struct timerqueue_node *timerqueue_iterate_next(
+						struct timerqueue_node *node);
+
+/**
+ * timerqueue_getnext - Returns the timer with the earlies expiration time
+ *
+ * @head: head of timerqueue
+ *
+ * Returns a pointer to the timer node that has the
+ * earliest expiration time.
+ */
+static inline
+struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head)
+{
+	return head->next;
+}
+
+static inline void timerqueue_init(struct timerqueue_node *node)
+{
+	RB_CLEAR_NODE(&node->node);
+}
+
+static inline void timerqueue_init_head(struct timerqueue_head *head)
+{
+	head->head = RB_ROOT;
+	head->next = NULL;
+}
+#endif /* _LINUX_TIMERQUEUE_H */
diff --git a/include/linux/tipc.h b/include/linux/tipc.h
index d10614b29d5..1eefa3f6d1f 100644
--- a/include/linux/tipc.h
+++ b/include/linux/tipc.h
@@ -1,6 +1,6 @@
 /*
  * include/linux/tipc.h: Include file for TIPC socket interface
- * 
+ *
  * Copyright (c) 2003-2006, Ericsson AB
  * Copyright (c) 2005, Wind River Systems
  * All rights reserved.
@@ -42,7 +42,7 @@
 /*
  * TIPC addressing primitives
  */
- 
+
 struct tipc_portid {
 	__u32 ref;
 	__u32 node;
@@ -89,7 +89,7 @@ static inline unsigned int tipc_node(__u32 addr)
 #define TIPC_TOP_SRV		1	/* topology service name type */
 #define TIPC_RESERVED_TYPES	64	/* lowest user-publishable name type */
 
-/* 
+/*
  * Publication scopes when binding port names and port name sequences
  */
 
@@ -112,7 +112,7 @@ static inline unsigned int tipc_node(__u32 addr)
 #define TIPC_HIGH_IMPORTANCE		2
 #define TIPC_CRITICAL_IMPORTANCE	3
 
-/* 
+/*
  * Msg rejection/connection shutdown reasons
  */
 
@@ -127,9 +127,9 @@ static inline unsigned int tipc_node(__u32 addr)
  * TIPC topology subscription service definitions
  */
 
-#define TIPC_SUB_PORTS     	0x01  	/* filter for port availability */
-#define TIPC_SUB_SERVICE     	0x02  	/* filter for service availability */
-#define TIPC_SUB_CANCEL         0x04    /* cancel a subscription */
+#define TIPC_SUB_PORTS		0x01	/* filter for port availability */
+#define TIPC_SUB_SERVICE	0x02	/* filter for service availability */
+#define TIPC_SUB_CANCEL		0x04	/* cancel a subscription */
 #if 0
 /* The following filter options are not currently implemented */
 #define TIPC_SUB_NO_BIND_EVTS	0x04	/* filter out "publish" events */
@@ -137,12 +137,12 @@ static inline unsigned int tipc_node(__u32 addr)
 #define TIPC_SUB_SINGLE_EVT	0x10	/* expire after first event */
 #endif
 
-#define TIPC_WAIT_FOREVER	~0	/* timeout for permanent subscription */
+#define TIPC_WAIT_FOREVER	(~0)	/* timeout for permanent subscription */
 
 struct tipc_subscr {
 	struct tipc_name_seq seq;	/* name sequence of interest */
 	__u32 timeout;			/* subscription duration (in ms) */
-        __u32 filter;   		/* bitmask of filter options */
+	__u32 filter;			/* bitmask of filter options */
 	char usr_handle[8];		/* available for subscriber use */
 };
 
diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h
index 9cde86c3241..7d42460a5e3 100644
--- a/include/linux/tipc_config.h
+++ b/include/linux/tipc_config.h
@@ -1,6 +1,6 @@
 /*
  * include/linux/tipc_config.h: Include file for TIPC configuration interface
- * 
+ *
  * Copyright (c) 2003-2006, Ericsson AB
  * Copyright (c) 2005-2007, Wind River Systems
  * All rights reserved.
@@ -54,19 +54,19 @@
  * which specify parameters or results for the operation.
  *
  * For many operations, the request and reply messages have a fixed number
- * of TLVs (usually zero or one); however, some reply messages may return 
+ * of TLVs (usually zero or one); however, some reply messages may return
  * a variable number of TLVs.  A failed request is denoted by the presence
  * of an "error string" TLV in the reply message instead of the TLV(s) the
  * reply should contain if the request succeeds.
  */
- 
-/* 
+
+/*
  * Public commands:
  * May be issued by any process.
- * Accepted by own node, or by remote node only if remote management enabled.                       
+ * Accepted by own node, or by remote node only if remote management enabled.
  */
- 
-#define  TIPC_CMD_NOOP   	    0x0000    /* tx none, rx none */
+
+#define  TIPC_CMD_NOOP              0x0000    /* tx none, rx none */
 #define  TIPC_CMD_GET_NODES         0x0001    /* tx net_addr, rx node_info(s) */
 #define  TIPC_CMD_GET_MEDIA_NAMES   0x0002    /* tx none, rx media_name(s) */
 #define  TIPC_CMD_GET_BEARER_NAMES  0x0003    /* tx none, rx bearer_name(s) */
@@ -83,21 +83,21 @@
 #define  TIPC_CMD_GET_LINK_PEER     0x000D    /* tx link_name, rx ? */
 #endif
 
-/* 
+/*
  * Protected commands:
  * May only be issued by "network administration capable" process.
  * Accepted by own node, or by remote node only if remote management enabled
- * and this node is zone manager.                       
+ * and this node is zone manager.
  */
 
 #define  TIPC_CMD_GET_REMOTE_MNG    0x4003    /* tx none, rx unsigned */
 #define  TIPC_CMD_GET_MAX_PORTS     0x4004    /* tx none, rx unsigned */
 #define  TIPC_CMD_GET_MAX_PUBL      0x4005    /* tx none, rx unsigned */
 #define  TIPC_CMD_GET_MAX_SUBSCR    0x4006    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_ZONES     0x4007    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_CLUSTERS  0x4008    /* tx none, rx unsigned */
+#define  TIPC_CMD_GET_MAX_ZONES     0x4007    /* obsoleted */
+#define  TIPC_CMD_GET_MAX_CLUSTERS  0x4008    /* obsoleted */
 #define  TIPC_CMD_GET_MAX_NODES     0x4009    /* tx none, rx unsigned */
-#define  TIPC_CMD_GET_MAX_SLAVES    0x400A    /* tx none, rx unsigned */
+#define  TIPC_CMD_GET_MAX_SLAVES    0x400A    /* obsoleted */
 #define  TIPC_CMD_GET_NETID         0x400B    /* tx none, rx unsigned */
 
 #define  TIPC_CMD_ENABLE_BEARER     0x4101    /* tx bearer_config, rx none */
@@ -116,10 +116,10 @@
 #define  TIPC_CMD_UNBLOCK_LINK      0x4106    /* tx link_name, rx none */
 #endif
 
-/* 
+/*
  * Private commands:
  * May only be issued by "network administration capable" process.
- * Accepted by own node only; cannot be used on a remote node.                       
+ * Accepted by own node only; cannot be used on a remote node.
  */
 
 #define  TIPC_CMD_SET_NODE_ADDR     0x8001    /* tx net_addr, rx none */
@@ -130,10 +130,10 @@
 #define  TIPC_CMD_SET_MAX_PORTS     0x8004    /* tx unsigned, rx none */
 #define  TIPC_CMD_SET_MAX_PUBL      0x8005    /* tx unsigned, rx none */
 #define  TIPC_CMD_SET_MAX_SUBSCR    0x8006    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_ZONES     0x8007    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_CLUSTERS  0x8008    /* tx unsigned, rx none */
+#define  TIPC_CMD_SET_MAX_ZONES     0x8007    /* obsoleted */
+#define  TIPC_CMD_SET_MAX_CLUSTERS  0x8008    /* obsoleted */
 #define  TIPC_CMD_SET_MAX_NODES     0x8009    /* tx unsigned, rx none */
-#define  TIPC_CMD_SET_MAX_SLAVES    0x800A    /* tx unsigned, rx none */
+#define  TIPC_CMD_SET_MAX_SLAVES    0x800A    /* obsoleted */
 #define  TIPC_CMD_SET_NETID         0x800B    /* tx unsigned, rx none */
 
 /*
@@ -156,20 +156,20 @@
 #define TIPC_TLV_ULTRA_STRING	5	/* char[32768] (max) */
 
 #define TIPC_TLV_ERROR_STRING	16	/* char[128] containing "error code" */
-#define TIPC_TLV_NET_ADDR   	17	/* 32-bit integer denoting <Z.C.N> */
+#define TIPC_TLV_NET_ADDR	17	/* 32-bit integer denoting <Z.C.N> */
 #define TIPC_TLV_MEDIA_NAME	18	/* char[TIPC_MAX_MEDIA_NAME] */
 #define TIPC_TLV_BEARER_NAME	19	/* char[TIPC_MAX_BEARER_NAME] */
 #define TIPC_TLV_LINK_NAME	20	/* char[TIPC_MAX_LINK_NAME] */
 #define TIPC_TLV_NODE_INFO	21	/* struct tipc_node_info */
 #define TIPC_TLV_LINK_INFO	22	/* struct tipc_link_info */
-#define TIPC_TLV_BEARER_CONFIG  23	/* struct tipc_bearer_config */
-#define TIPC_TLV_LINK_CONFIG    24	/* struct tipc_link_config */
+#define TIPC_TLV_BEARER_CONFIG	23	/* struct tipc_bearer_config */
+#define TIPC_TLV_LINK_CONFIG	24	/* struct tipc_link_config */
 #define TIPC_TLV_NAME_TBL_QUERY	25	/* struct tipc_name_table_query */
-#define TIPC_TLV_PORT_REF   	26	/* 32-bit port reference */
+#define TIPC_TLV_PORT_REF	26	/* 32-bit port reference */
 
 /*
  * Maximum sizes of TIPC bearer-related names (including terminating NUL)
- */ 
+ */
 
 #define TIPC_MAX_MEDIA_NAME	16	/* format = media */
 #define TIPC_MAX_IF_NAME	16	/* format = interface */
@@ -234,7 +234,7 @@ struct tipc_name_table_query {
 };
 
 /*
- * The error string TLV is a null-terminated string describing the cause 
+ * The error string TLV is a null-terminated string describing the cause
  * of the request failure.  To simplify error processing (and to save space)
  * the first character of the string can be a special error code character
  * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason.
@@ -254,16 +254,11 @@ struct tipc_link_create {
 	struct tipc_media_addr peer_addr;
 	char bearer_name[TIPC_MAX_BEARER_NAME];
 };
-
-struct tipc_route_info {
-	__u32 dest;
-	__u32 router;
-};
 #endif
 
 /*
  * A TLV consists of a descriptor, followed by the TLV value.
- * TLV descriptor fields are stored in network byte order; 
+ * TLV descriptor fields are stored in network byte order;
  * TLV values must also be stored in network byte order (where applicable).
  * TLV descriptors must be aligned to addresses which are multiple of 4,
  * so up to 3 bytes of padding may exist at the end of the TLV value area.
@@ -299,7 +294,7 @@ static inline int TLV_OK(const void *tlv, __u16 space)
 
 static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type)
 {
-	return TLV_OK(tlv, space) && 
+	return TLV_OK(tlv, space) &&
 		(ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type);
 }
 
@@ -318,7 +313,7 @@ static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len)
 }
 
 /*
- * A TLV list descriptor simplifies processing of messages 
+ * A TLV list descriptor simplifies processing of messages
  * containing multiple TLVs.
  */
 
@@ -327,15 +322,15 @@ struct tlv_list_desc {
 	__u32 tlv_space;		/* # bytes from curr TLV to list end */
 };
 
-static inline void TLV_LIST_INIT(struct tlv_list_desc *list, 
+static inline void TLV_LIST_INIT(struct tlv_list_desc *list,
 				 void *data, __u32 space)
 {
 	list->tlv_ptr = (struct tlv_desc *)data;
 	list->tlv_space = space;
 }
-	     
+
 static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list)
-{ 
+{
 	return (list->tlv_space == 0);
 }
 
@@ -353,7 +348,7 @@ static inline void TLV_LIST_STEP(struct tlv_list_desc *list)
 {
 	__u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len));
 
-        list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
+	list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space);
 	list->tlv_space -= tlv_space;
 }
 
@@ -377,15 +372,14 @@ struct tipc_genlmsghdr {
 #define TIPC_GENL_HDRLEN	NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr))
 
 /*
- * Configuration messages exchanged via TIPC sockets use the TIPC configuration 
- * message header, which is defined below.  This structure is analogous 
- * to the Netlink message header, but fields are stored in network byte order 
- * and no padding is permitted between the header and the message data 
+ * Configuration messages exchanged via TIPC sockets use the TIPC configuration
+ * message header, which is defined below.  This structure is analogous
+ * to the Netlink message header, but fields are stored in network byte order
+ * and no padding is permitted between the header and the message data
  * that follows.
  */
 
-struct tipc_cfg_msg_hdr
-{
+struct tipc_cfg_msg_hdr {
 	__be32 tcm_len;		/* Message length (including header) */
 	__be16 tcm_type;	/* Command type */
 	__be16 tcm_flags;	/* Additional flags */
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index a4a90b6726c..d3e4f87e95c 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -106,6 +106,7 @@ static inline void tracepoint_update_probe_range(struct tracepoint *begin,
 
 #define TP_PROTO(args...)	args
 #define TP_ARGS(args...)	args
+#define TP_CONDITION(args...)	args
 
 #ifdef CONFIG_TRACEPOINTS
 
@@ -119,12 +120,14 @@ static inline void tracepoint_update_probe_range(struct tracepoint *begin,
  * as "(void *, void)". The DECLARE_TRACE_NOARGS() will pass in just
  * "void *data", where as the DECLARE_TRACE() will pass in "void *data, proto".
  */
-#define __DO_TRACE(tp, proto, args)					\
+#define __DO_TRACE(tp, proto, args, cond)				\
 	do {								\
 		struct tracepoint_func *it_func_ptr;			\
 		void *it_func;						\
 		void *__data;						\
 									\
+		if (!(cond))						\
+			return;						\
 		rcu_read_lock_sched_notrace();				\
 		it_func_ptr = rcu_dereference_sched((tp)->funcs);	\
 		if (it_func_ptr) {					\
@@ -142,7 +145,7 @@ static inline void tracepoint_update_probe_range(struct tracepoint *begin,
  * not add unwanted padding between the beginning of the section and the
  * structure. Force alignment to the same alignment as the section start.
  */
-#define __DECLARE_TRACE(name, proto, args, data_proto, data_args)	\
+#define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args)	\
 	extern struct tracepoint __tracepoint_##name;			\
 	static inline void trace_##name(proto)				\
 	{								\
@@ -151,7 +154,8 @@ static inline void tracepoint_update_probe_range(struct tracepoint *begin,
 do_trace:								\
 			__DO_TRACE(&__tracepoint_##name,		\
 				TP_PROTO(data_proto),			\
-				TP_ARGS(data_args));			\
+				TP_ARGS(data_args),			\
+				TP_CONDITION(cond));			\
 	}								\
 	static inline int						\
 	register_trace_##name(void (*probe)(data_proto), void *data)	\
@@ -186,7 +190,7 @@ do_trace:								\
 	EXPORT_SYMBOL(__tracepoint_##name)
 
 #else /* !CONFIG_TRACEPOINTS */
-#define __DECLARE_TRACE(name, proto, args, data_proto, data_args)	\
+#define __DECLARE_TRACE(name, proto, args, cond, data_proto, data_args)	\
 	static inline void trace_##name(proto)				\
 	{ }								\
 	static inline int						\
@@ -227,13 +231,20 @@ do_trace:								\
  * "void *__data, proto" as the callback prototype.
  */
 #define DECLARE_TRACE_NOARGS(name)					\
-		__DECLARE_TRACE(name, void, , void *__data, __data)
+		__DECLARE_TRACE(name, void, , 1, void *__data, __data)
 
 #define DECLARE_TRACE(name, proto, args)				\
-		__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args),	\
+		__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), 1,	\
 				PARAMS(void *__data, proto),		\
 				PARAMS(__data, args))
 
+#define DECLARE_TRACE_CONDITION(name, proto, args, cond)		\
+	__DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), PARAMS(cond), \
+			PARAMS(void *__data, proto),			\
+			PARAMS(__data, args))
+
+#define TRACE_EVENT_FLAGS(event, flag)
+
 #endif /* DECLARE_TRACE */
 
 #ifndef TRACE_EVENT
@@ -347,11 +358,21 @@ do_trace:								\
 	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
 #define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
 	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
+#define DEFINE_EVENT_CONDITION(template, name, proto,		\
+			       args, cond)			\
+	DECLARE_TRACE_CONDITION(name, PARAMS(proto),		\
+				PARAMS(args), PARAMS(cond))
 
 #define TRACE_EVENT(name, proto, args, struct, assign, print)	\
 	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
 #define TRACE_EVENT_FN(name, proto, args, struct,		\
 		assign, print, reg, unreg)			\
 	DECLARE_TRACE(name, PARAMS(proto), PARAMS(args))
+#define TRACE_EVENT_CONDITION(name, proto, args, cond,		\
+			      struct, assign, print)		\
+	DECLARE_TRACE_CONDITION(name, PARAMS(proto),		\
+				PARAMS(args), PARAMS(cond))
+
+#define TRACE_EVENT_FLAGS(event, flag)
 
 #endif /* ifdef TRACE_EVENT (see note above) */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 2a754748dd5..54e4eaaa056 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -13,7 +13,6 @@
 #include <linux/tty_driver.h>
 #include <linux/tty_ldisc.h>
 #include <linux/mutex.h>
-#include <linux/smp_lock.h>
 
 #include <asm/system.h>
 
@@ -50,7 +49,7 @@
 #define N_V253		19	/* Codec control over voice modem */
 #define N_CAIF		20      /* CAIF protocol for talking to modems */
 #define N_GSM0710	21	/* GSM 0710 Mux */
-#define N_TI_WL	22	/* for TI's WL BT, FM, GPS combo chips */
+#define N_TI_WL		22	/* for TI's WL BT, FM, GPS combo chips */
 
 /*
  * This character is the same as _POSIX_VDISABLE: it cannot be used as
@@ -367,6 +366,7 @@ struct tty_file_private {
 #define TTY_HUPPED 		18	/* Post driver->hangup() */
 #define TTY_FLUSHING		19	/* Flushing to ldisc in progress */
 #define TTY_FLUSHPENDING	20	/* Queued buffer flush pending */
+#define TTY_HUPPING 		21	/* ->hangup() in progress */
 
 #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
 
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index db2d227694d..c3d43eb4150 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -102,7 +102,7 @@
  * 	    unsigned int cmd, unsigned long arg);
  *
  * 	This routine allows the tty driver to implement
- *	device-specific ioctl's.  If the ioctl number passed in cmd
+ *	device-specific ioctls.  If the ioctl number passed in cmd
  * 	is not recognized by the driver, it should return ENOIOCTLCMD.
  *
  *	Optional
@@ -167,12 +167,12 @@
  * 
  * void (*hangup)(struct tty_struct *tty);
  *
- * 	This routine notifies the tty driver that it should hangup the
+ * 	This routine notifies the tty driver that it should hang up the
  * 	tty device.
  *
  *	Optional:
  *
- * int (*break_ctl)(struct tty_stuct *tty, int state);
+ * int (*break_ctl)(struct tty_struct *tty, int state);
  *
  * 	This optional routine requests the tty driver to turn on or
  * 	off BREAK status on the RS-232 port.  If state is -1,
@@ -235,6 +235,7 @@
 #include <linux/fs.h>
 #include <linux/list.h>
 #include <linux/cdev.h>
+#include <linux/termios.h>
 
 struct tty_struct;
 struct tty_driver;
@@ -357,7 +358,7 @@ static inline struct tty_driver *tty_driver_kref_get(struct tty_driver *d)
  * 	overruns, either.)
  *
  * TTY_DRIVER_DYNAMIC_DEV --- if set, the individual tty devices need
- *	to be registered with a call to tty_register_driver() when the
+ *	to be registered with a call to tty_register_device() when the
  *	device is found in the system and unregistered with a call to
  *	tty_unregister_device() so the devices will be show up
  *	properly in sysfs.  If not set, driver->num entries will be
diff --git a/include/linux/uinput.h b/include/linux/uinput.h
index 05f7fed2b17..d28c726ede4 100644
--- a/include/linux/uinput.h
+++ b/include/linux/uinput.h
@@ -104,6 +104,7 @@ struct uinput_ff_erase {
 #define UI_SET_FFBIT		_IOW(UINPUT_IOCTL_BASE, 107, int)
 #define UI_SET_PHYS		_IOW(UINPUT_IOCTL_BASE, 108, char*)
 #define UI_SET_SWBIT		_IOW(UINPUT_IOCTL_BASE, 109, int)
+#define UI_SET_PROPBIT		_IOW(UINPUT_IOCTL_BASE, 110, int)
 
 #define UI_BEGIN_FF_UPLOAD	_IOWR(UINPUT_IOCTL_BASE, 200, struct uinput_ff_upload)
 #define UI_END_FF_UPLOAD	_IOW(UINPUT_IOCTL_BASE, 201, struct uinput_ff_upload)
diff --git a/include/linux/uio_driver.h b/include/linux/uio_driver.h
index d6188e5a52d..665517c05ea 100644
--- a/include/linux/uio_driver.h
+++ b/include/linux/uio_driver.h
@@ -3,7 +3,7 @@
  *
  * Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
  * Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- * Copyright(C) 2006, Hans J. Koch <hjk@linutronix.de>
+ * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
  * Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
  *
  * Userspace IO driver.
diff --git a/include/linux/unaligned/packed_struct.h b/include/linux/unaligned/packed_struct.h
index 2498bb9fe00..c9a6abd972a 100644
--- a/include/linux/unaligned/packed_struct.h
+++ b/include/linux/unaligned/packed_struct.h
@@ -3,9 +3,9 @@
 
 #include <linux/kernel.h>
 
-struct __una_u16 { u16 x __attribute__((packed)); };
-struct __una_u32 { u32 x __attribute__((packed)); };
-struct __una_u64 { u64 x __attribute__((packed)); };
+struct __una_u16 { u16 x; } __attribute__((packed));
+struct __una_u32 { u32 x; } __attribute__((packed));
+struct __una_u64 { u64 x; } __attribute__((packed));
 
 static inline u16 __get_unaligned_cpu16(const void *p)
 {
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 35fe6ab222b..bd69b65f335 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -20,6 +20,7 @@
 #include <linux/completion.h>	/* for struct completion */
 #include <linux/sched.h>	/* for current && schedule_timeout */
 #include <linux/mutex.h>	/* for struct mutex */
+#include <linux/pm_runtime.h>	/* for runtime PM */
 
 struct usb_device;
 struct usb_driver;
@@ -313,6 +314,10 @@ struct usb_bus {
 	int busnum;			/* Bus number (in order of reg) */
 	const char *bus_name;		/* stable id (PCI slot_name etc) */
 	u8 uses_dma;			/* Does the host controller use DMA? */
+	u8 uses_pio_for_control;	/*
+					 * Does the host controller use PIO
+					 * for control transfers?
+					 */
 	u8 otg_port;			/* 0, or number of OTG/HNP port */
 	unsigned is_b_host:1;		/* true during some HNP roleswitches */
 	unsigned b_hnp_enable:1;	/* OTG: did A-Host enable HNP? */
@@ -407,8 +412,6 @@ struct usb_tt;
  * @quirks: quirks of the whole device
  * @urbnum: number of URBs submitted for the whole device
  * @active_duration: total time device is not suspended
- * @last_busy: time of last use
- * @autosuspend_delay: in jiffies
  * @connect_time: time device was first connected
  * @do_remote_wakeup:  remote wakeup should be enabled
  * @reset_resume: needs reset instead of resume
@@ -481,8 +484,6 @@ struct usb_device {
 	unsigned long active_duration;
 
 #ifdef CONFIG_PM
-	unsigned long last_busy;
-	int autosuspend_delay;
 	unsigned long connect_time;
 
 	unsigned do_remote_wakeup:1;
@@ -527,7 +528,7 @@ extern void usb_autopm_put_interface_no_suspend(struct usb_interface *intf);
 
 static inline void usb_mark_last_busy(struct usb_device *udev)
 {
-	udev->last_busy = jiffies;
+	pm_runtime_mark_last_busy(&udev->dev);
 }
 
 #else
@@ -797,7 +798,7 @@ struct usbdrv_wrap {
  * @disconnect: Called when the interface is no longer accessible, usually
  *	because its device has been (or is being) disconnected or the
  *	driver module is being unloaded.
- * @ioctl: Used for drivers that want to talk to userspace through
+ * @unlocked_ioctl: Used for drivers that want to talk to userspace through
  *	the "usbfs" filesystem.  This lets devices provide ways to
  *	expose information to user space regardless of where they
  *	do (or don't) show up otherwise in the filesystem.
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index 119194c85d1..10ec0699bea 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -28,6 +28,13 @@
 #define HUB_STOP_TT		11
 
 /*
+ * Hub class additional requests defined by USB 3.0 spec
+ * See USB 3.0 spec Table 10-6
+ */
+#define HUB_SET_DEPTH		12
+#define HUB_GET_PORT_ERR_COUNT	13
+
+/*
  * Hub Class feature numbers
  * See USB 2.0 spec Table 11-17
  */
@@ -56,6 +63,20 @@
 #define USB_PORT_FEAT_C_PORT_L1         23
 
 /*
+ * Port feature selectors added by USB 3.0 spec.
+ * See USB 3.0 spec Table 10-7
+ */
+#define USB_PORT_FEAT_LINK_STATE		5
+#define USB_PORT_FEAT_U1_TIMEOUT		23
+#define USB_PORT_FEAT_U2_TIMEOUT		24
+#define USB_PORT_FEAT_C_LINK_STATE		25
+#define USB_PORT_FEAT_C_CONFIG_ERR		26
+#define USB_PORT_FEAT_REMOTE_WAKE_MASK		27
+#define USB_PORT_FEAT_BH_PORT_RESET		28
+#define USB_PORT_FEAT_C_BH_PORT_RESET		29
+#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT	30
+
+/*
  * Hub Status and Hub Change results
  * See USB 2.0 spec Table 11-19 and Table 11-20
  */
@@ -84,6 +105,32 @@ struct usb_port_status {
 #define USB_PORT_STAT_SUPER_SPEED	0x8000	/* Linux-internal */
 
 /*
+ * Additions to wPortStatus bit field from USB 3.0
+ * See USB 3.0 spec Table 10-10
+ */
+#define USB_PORT_STAT_LINK_STATE	0x01e0
+#define USB_SS_PORT_STAT_POWER		0x0200
+#define USB_PORT_STAT_SPEED_5GBPS	0x0000
+/* Valid only if port is enabled */
+
+/*
+ * Definitions for PORT_LINK_STATE values
+ * (bits 5-8) in wPortStatus
+ */
+#define USB_SS_PORT_LS_U0		0x0000
+#define USB_SS_PORT_LS_U1		0x0020
+#define USB_SS_PORT_LS_U2		0x0040
+#define USB_SS_PORT_LS_U3		0x0060
+#define USB_SS_PORT_LS_SS_DISABLED	0x0080
+#define USB_SS_PORT_LS_RX_DETECT	0x00a0
+#define USB_SS_PORT_LS_SS_INACTIVE	0x00c0
+#define USB_SS_PORT_LS_POLLING		0x00e0
+#define USB_SS_PORT_LS_RECOVERY		0x0100
+#define USB_SS_PORT_LS_HOT_RESET	0x0120
+#define USB_SS_PORT_LS_COMP_MOD		0x0140
+#define USB_SS_PORT_LS_LOOPBACK		0x0160
+
+/*
  * wPortChange bit field
  * See USB 2.0 spec Table 11-22
  * Bits 0 to 4 shown, bits 5 to 15 are reserved
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index f917bbbc890..ab461948b57 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -124,6 +124,16 @@
 #define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
 
 /*
+ * Test Mode Selectors
+ * See USB 2.0 spec Table 9-7
+ */
+#define	TEST_J		1
+#define	TEST_K		2
+#define	TEST_SE0_NAK	3
+#define	TEST_PACKET	4
+#define	TEST_FORCE_EN	5
+
+/*
  * New Feature Selectors as added by USB 3.0
  * See USB 3.0 spec Table 9-6
  */
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 0b6e751ea0b..dd6ee49a084 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -471,6 +471,10 @@ extern void usb_ep0_reinit(struct usb_device *);
 
 /*-------------------------------------------------------------------------*/
 
+/* class requests from USB 3.0 hub spec, table 10-5 */
+#define SetHubDepth		(0x3000 | HUB_SET_DEPTH)
+#define GetPortErrorCount	(0x8000 | HUB_GET_PORT_ERR_COUNT)
+
 /*
  * Generic bandwidth allocation constants/support
  */
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
new file mode 100644
index 00000000000..3675e03b153
--- /dev/null
+++ b/include/linux/usb/msm_hsusb.h
@@ -0,0 +1,112 @@
+/* linux/include/asm-arm/arch-msm/hsusb.h
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HSUSB_H
+#define __ASM_ARCH_MSM_HSUSB_H
+
+#include <linux/types.h>
+#include <linux/usb/otg.h>
+
+/**
+ * Supported USB modes
+ *
+ * USB_PERIPHERAL       Only peripheral mode is supported.
+ * USB_HOST             Only host mode is supported.
+ * USB_OTG              OTG mode is supported.
+ *
+ */
+enum usb_mode_type {
+	USB_NONE = 0,
+	USB_PERIPHERAL,
+	USB_HOST,
+	USB_OTG,
+};
+
+/**
+ * OTG control
+ *
+ * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
+ *                      only configuration.
+ * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
+ * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
+ * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
+ *
+ */
+enum otg_control_type {
+	OTG_NO_CONTROL = 0,
+	OTG_PHY_CONTROL,
+	OTG_PMIC_CONTROL,
+	OTG_USER_CONTROL,
+};
+
+/**
+ * struct msm_otg_platform_data - platform device data
+ *              for msm72k_otg driver.
+ * @phy_init_seq: PHY configuration sequence. val, reg pairs
+ *              terminated by -1.
+ * @vbus_power: VBUS power on/off routine.
+ * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
+ * @mode: Supported mode (OTG/peripheral/host).
+ * @otg_control: OTG switch controlled by user/Id pin
+ * @default_mode: Default operational mode. Applicable only if
+ *              OTG switch is controller by user.
+ *
+ */
+struct msm_otg_platform_data {
+	int *phy_init_seq;
+	void (*vbus_power)(bool on);
+	unsigned power_budget;
+	enum usb_mode_type mode;
+	enum otg_control_type otg_control;
+	enum usb_mode_type default_mode;
+	void (*setup_gpio)(enum usb_otg_state state);
+};
+
+/**
+ * struct msm_otg: OTG driver data. Shared by HCD and DCD.
+ * @otg: USB OTG Transceiver structure.
+ * @pdata: otg device platform data.
+ * @irq: IRQ number assigned for HSUSB controller.
+ * @clk: clock struct of usb_hs_clk.
+ * @pclk: clock struct of usb_hs_pclk.
+ * @phy_reset_clk: clock struct of usb_phy_clk.
+ * @core_clk: clock struct of usb_hs_core_clk.
+ * @regs: ioremapped register base address.
+ * @inputs: OTG state machine inputs(Id, SessValid etc).
+ * @sm_work: OTG state machine work.
+ * @in_lpm: indicates low power mode (LPM) state.
+ * @async_int: Async interrupt arrived.
+ *
+ */
+struct msm_otg {
+	struct otg_transceiver otg;
+	struct msm_otg_platform_data *pdata;
+	int irq;
+	struct clk *clk;
+	struct clk *pclk;
+	struct clk *phy_reset_clk;
+	struct clk *core_clk;
+	void __iomem *regs;
+#define ID		0
+#define B_SESS_VLD	1
+	unsigned long inputs;
+	struct work_struct sm_work;
+	atomic_t in_lpm;
+	int async_int;
+};
+
+#endif
diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
new file mode 100644
index 00000000000..b92e17349c7
--- /dev/null
+++ b/include/linux/usb/msm_hsusb_hw.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
+#define __LINUX_USB_GADGET_MSM72K_UDC_H__
+
+#ifdef CONFIG_ARCH_MSM7X00A
+#define USB_SBUSCFG          (MSM_USB_BASE + 0x0090)
+#else
+#define USB_AHBBURST         (MSM_USB_BASE + 0x0090)
+#define USB_AHBMODE          (MSM_USB_BASE + 0x0098)
+#endif
+#define USB_CAPLENGTH        (MSM_USB_BASE + 0x0100) /* 8 bit */
+
+#define USB_USBCMD           (MSM_USB_BASE + 0x0140)
+#define USB_PORTSC           (MSM_USB_BASE + 0x0184)
+#define USB_OTGSC            (MSM_USB_BASE + 0x01A4)
+#define USB_USBMODE          (MSM_USB_BASE + 0x01A8)
+
+#define USBCMD_RESET   2
+#define USB_USBINTR          (MSM_USB_BASE + 0x0148)
+
+#define PORTSC_PHCD            (1 << 23) /* phy suspend mode */
+#define PORTSC_PTS_MASK         (3 << 30)
+#define PORTSC_PTS_ULPI         (3 << 30)
+
+#define USB_ULPI_VIEWPORT    (MSM_USB_BASE + 0x0170)
+#define ULPI_RUN              (1 << 30)
+#define ULPI_WRITE            (1 << 29)
+#define ULPI_READ             (0 << 29)
+#define ULPI_ADDR(n)          (((n) & 255) << 16)
+#define ULPI_DATA(n)          ((n) & 255)
+#define ULPI_DATA_READ(n)     (((n) >> 8) & 255)
+
+#define ASYNC_INTR_CTRL         (1 << 29) /* Enable async interrupt */
+#define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */
+
+/* OTG definitions */
+#define OTGSC_INTSTS_MASK	(0x7f << 16)
+#define OTGSC_ID		(1 << 8)
+#define OTGSC_BSV		(1 << 11)
+#define OTGSC_IDIS		(1 << 16)
+#define OTGSC_BSVIS		(1 << 19)
+#define OTGSC_IDIE		(1 << 24)
+#define OTGSC_BSVIE		(1 << 27)
+
+#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index ee2dd1d506e..eb505250940 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -3,7 +3,7 @@
  * Inventra (Multidrop) Highspeed Dual-Role Controllers:  (M)HDRC.
  *
  * Board initialization should put one of these into dev->platform_data,
- * probably on some platform_device named "musb_hdrc".  It encapsulates
+ * probably on some platform_device named "musb-hdrc".  It encapsulates
  * key configuration differences between boards.
  */
 
@@ -89,6 +89,8 @@ struct musb_hdrc_config {
 	/* A GPIO controlling VRSEL in Blackfin */
 	unsigned int	gpio_vrsel;
 	unsigned int	gpio_vrsel_active;
+	/* musb CLKIN in Blackfin in MHZ */
+	unsigned char   clkin;
 #endif
 
 };
@@ -118,14 +120,14 @@ struct musb_hdrc_platform_data {
 	/* Power the device on or off */
 	int		(*set_power)(int state);
 
-	/* Turn device clock on or off */
-	int		(*set_clock)(struct clk *clock, int is_on);
-
 	/* MUSB configuration-specific details */
 	struct musb_hdrc_config	*config;
 
 	/* Architecture specific board data	*/
 	void		*board_data;
+
+	/* Platform specific struct musb_ops pointer */
+	const void	*platform_ops;
 };
 
 
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index 0a5b3711e50..a1a1e7a73ec 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -116,7 +116,7 @@ struct otg_transceiver {
 /* for board-specific init logic */
 extern int otg_set_transceiver(struct otg_transceiver *);
 
-#if defined(CONFIG_NOP_USB_XCEIV) || defined(CONFIG_NOP_USB_XCEIV_MODULE)
+#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
 /* sometimes transceivers are accessed only through e.g. ULPI */
 extern void usb_nop_xceiv_register(void);
 extern void usb_nop_xceiv_unregister(void);
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index 7ae27a47381..44842c8d38c 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -97,6 +97,12 @@ struct driver_info {
 
 #define FLAG_LINK_INTR	0x0800		/* updates link (carrier) status */
 
+/*
+ * Indicates to usbnet, that USB driver accumulates multiple IP packets.
+ * Affects statistic (counters) and short packet handling.
+ */
+#define FLAG_MULTI_PACKET	0x1000
+
 	/* init device ... can sleep, or cause probe() failure */
 	int	(*bind)(struct usbnet *, struct usb_interface *);
 
diff --git a/include/linux/via-core.h b/include/linux/via-core.h
index 38bffd8ccca..9c21cdf3e3b 100644
--- a/include/linux/via-core.h
+++ b/include/linux/via-core.h
@@ -60,6 +60,21 @@ struct via_port_cfg {
 };
 
 /*
+ * Allow subdevs to register suspend/resume hooks.
+ */
+#ifdef CONFIG_PM
+struct viafb_pm_hooks {
+	struct list_head list;
+	int (*suspend)(void *private);
+	int (*resume)(void *private);
+	void *private;
+};
+
+void viafb_pm_register(struct viafb_pm_hooks *hooks);
+void viafb_pm_unregister(struct viafb_pm_hooks *hooks);
+#endif /* CONFIG_PM */
+
+/*
  * This is the global viafb "device" containing stuff needed by
  * all subdevs.
  */
diff --git a/include/linux/video_output.h b/include/linux/video_output.h
index 2fb46bc9340..ed5cdeb3604 100644
--- a/include/linux/video_output.h
+++ b/include/linux/video_output.h
@@ -23,6 +23,7 @@
 #ifndef _LINUX_VIDEO_OUTPUT_H
 #define _LINUX_VIDEO_OUTPUT_H
 #include <linux/device.h>
+#include <linux/err.h>
 struct output_device;
 struct output_properties {
 	int (*set_state)(struct output_device *);
@@ -34,9 +35,23 @@ struct output_device {
 	struct device dev;
 };
 #define to_output_device(obj) container_of(obj, struct output_device, dev)
+#if	defined(CONFIG_VIDEO_OUTPUT_CONTROL) || defined(CONFIG_VIDEO_OUTPUT_CONTROL_MODULE)
 struct output_device *video_output_register(const char *name,
 	struct device *dev,
 	void *devdata,
 	struct output_properties *op);
 void video_output_unregister(struct output_device *dev);
+#else
+static struct output_device *video_output_register(const char *name,
+        struct device *dev,
+        void *devdata,
+        struct output_properties *op)
+{
+	return ERR_PTR(-ENODEV);
+}
+static void video_output_unregister(struct output_device *dev)
+{
+	return;
+}
+#endif
 #endif
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index a03dcf62ca9..44b54f619ac 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -7,8 +7,6 @@
 
 struct vm_area_struct;		/* vma defining user mapping in mm_types.h */
 
-extern bool vmap_lazy_unmap;
-
 /* bits in flags of vmalloc's vm_struct below */
 #define VM_IOREMAP	0x00000001	/* ioremap() and friends */
 #define VM_ALLOC	0x00000002	/* vmalloc() */
diff --git a/include/linux/wl12xx.h b/include/linux/wl12xx.h
index 4f902e1908a..bebb8efea0a 100644
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -24,6 +24,14 @@
 #ifndef _LINUX_WL12XX_H
 #define _LINUX_WL12XX_H
 
+/* The board reference clock values */
+enum {
+	WL12XX_REFCLOCK_19 = 0,	/* 19.2 MHz */
+	WL12XX_REFCLOCK_26 = 1,	/* 26 MHz */
+	WL12XX_REFCLOCK_38 = 2,	/* 38.4 MHz */
+	WL12XX_REFCLOCK_54 = 3,	/* 54 MHz */
+};
+
 struct wl12xx_platform_data {
 	void (*set_power)(bool enable);
 	/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h
index 0c0771f06bf..1ac11586a2f 100644
--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -127,12 +127,20 @@ struct execute_work {
 	.timer = TIMER_INITIALIZER(NULL, 0, 0),			\
 	}
 
+#define __DEFERRED_WORK_INITIALIZER(n, f) {			\
+	.work = __WORK_INITIALIZER((n).work, (f)),		\
+	.timer = TIMER_DEFERRED_INITIALIZER(NULL, 0, 0),	\
+	}
+
 #define DECLARE_WORK(n, f)					\
 	struct work_struct n = __WORK_INITIALIZER(n, f)
 
 #define DECLARE_DELAYED_WORK(n, f)				\
 	struct delayed_work n = __DELAYED_WORK_INITIALIZER(n, f)
 
+#define DECLARE_DEFERRED_WORK(n, f)				\
+	struct delayed_work n = __DEFERRED_WORK_INITIALIZER(n, f)
+
 /*
  * initialize a work item's function pointer
  */
@@ -401,7 +409,7 @@ static inline bool __cancel_delayed_work(struct delayed_work *work)
 }
 
 /* Obsolete. use cancel_delayed_work_sync() */
-static inline
+static inline __deprecated
 void cancel_rearming_delayed_workqueue(struct workqueue_struct *wq,
 					struct delayed_work *work)
 {
@@ -409,7 +417,7 @@ void cancel_rearming_delayed_workqueue(struct workqueue_struct *wq,
 }
 
 /* Obsolete. use cancel_delayed_work_sync() */
-static inline
+static inline __deprecated
 void cancel_rearming_delayed_work(struct delayed_work *work)
 {
 	cancel_delayed_work_sync(work);
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
index b971e384849..930fdd2de79 100644
--- a/include/linux/xfrm.h
+++ b/include/linux/xfrm.h
@@ -283,6 +283,7 @@ enum xfrm_attr_type_t {
 	XFRMA_KMADDRESS,        /* struct xfrm_user_kmaddress */
 	XFRMA_ALG_AUTH_TRUNC,	/* struct xfrm_algo_auth */
 	XFRMA_MARK,		/* struct xfrm_mark */
+	XFRMA_TFCPAD,		/* __u32 */
 	__XFRMA_MAX
 
 #define XFRMA_MAX (__XFRMA_MAX - 1)
diff --git a/include/media/bt819.h b/include/media/bt819.h
index 38f666bde77..8025f4bc2bb 100644
--- a/include/media/bt819.h
+++ b/include/media/bt819.h
@@ -26,7 +26,10 @@
 /* v4l2_device notifications. */
 
 /* Needed to reset the FIFO buffer when changing the input
-   or the video standard. */
+   or the video standard.
+
+   Note: these ioctls that internal to the kernel and are never called
+   from userspace. */
 #define BT819_FIFO_RESET_LOW 	_IO('b', 0)
 #define BT819_FIFO_RESET_HIGH 	_IO('b', 1)
 
diff --git a/include/media/cx2341x.h b/include/media/cx2341x.h
index 8d08ebfe20b..9635eebaab0 100644
--- a/include/media/cx2341x.h
+++ b/include/media/cx2341x.h
@@ -95,7 +95,7 @@ int cx2341x_update(void *priv, cx2341x_mbox_func func,
 		const struct cx2341x_mpeg_params *new);
 int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params,
 		struct v4l2_queryctrl *qctrl);
-const char **cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id);
+const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id);
 int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy,
 		struct v4l2_ext_controls *ctrls, unsigned int cmd);
 void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p);
diff --git a/include/media/ir-common.h b/include/media/ir-common.h
deleted file mode 100644
index 528050e39ad..00000000000
--- a/include/media/ir-common.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- *
- * some common structs and functions to handle infrared remotes via
- * input layer ...
- *
- * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef _IR_COMMON
-#define _IR_COMMON
-
-#include <linux/input.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-#include <media/ir-core.h>
-
-#define RC5_START(x)	(((x)>>12)&3)
-#define RC5_TOGGLE(x)	(((x)>>11)&1)
-#define RC5_ADDR(x)	(((x)>>6)&31)
-#define RC5_INSTR(x)	((x)&63)
-
-struct ir_input_state {
-	/* configuration */
-	u64      ir_type;
-
-	/* key info */
-	u32                ir_key;      /* ir scancode */
-	u32                keycode;     /* linux key code */
-	int                keypressed;  /* current state */
-};
-
-/* this was saa7134_ir and bttv_ir, moved here for
- * rc5 decoding. */
-struct card_ir {
-	struct input_dev        *dev;
-	struct ir_input_state   ir;
-	char                    name[32];
-	char                    phys[32];
-	int			users;
-
-	u32			running:1;
-	struct ir_dev_props	props;
-
-	/* Usual gpio signalling */
-
-	u32                     mask_keycode;
-	u32                     mask_keydown;
-	u32                     mask_keyup;
-	u32                     polling;
-	u32                     last_gpio;
-	int			shift_by;
-	int			start; // What should RC5_START() be
-	int			addr; // What RC5_ADDR() should be.
-	int			rc5_key_timeout;
-	int			rc5_remote_gap;
-	struct work_struct      work;
-	struct timer_list       timer;
-
-	/* RC5 gpio */
-	u32 rc5_gpio;
-	struct timer_list timer_end;	/* timer_end for code completion */
-	struct timer_list timer_keyup;	/* timer_end for key release */
-	u32 last_rc5;			/* last good rc5 code */
-	u32 last_bit;			/* last raw bit seen */
-	u32 code;			/* raw code under construction */
-	struct timeval base_time;	/* time of last seen code */
-	int active;			/* building raw code */
-
-	/* NEC decoding */
-	u32			nec_gpio;
-	struct tasklet_struct   tlet;
-
-	/* IR core raw decoding */
-	u32			raw_decode;
-};
-
-/* Routines from ir-functions.c */
-
-int ir_input_init(struct input_dev *dev, struct ir_input_state *ir,
-		   const u64 ir_type);
-void ir_input_nokey(struct input_dev *dev, struct ir_input_state *ir);
-void ir_input_keydown(struct input_dev *dev, struct ir_input_state *ir,
-		      u32 ir_key);
-u32  ir_extract_bits(u32 data, u32 mask);
-int  ir_dump_samples(u32 *samples, int count);
-int  ir_decode_biphase(u32 *samples, int count, int low, int high);
-int  ir_decode_pulsedistance(u32 *samples, int count, int low, int high);
-u32  ir_rc5_decode(unsigned int code);
-
-void ir_rc5_timer_end(unsigned long data);
-void ir_rc5_timer_keyup(unsigned long data);
-
-#endif
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
deleted file mode 100644
index 6dc37fae660..00000000000
--- a/include/media/ir-core.h
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Remote Controller core header
- *
- * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation version 2 of the License.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- */
-
-#ifndef _IR_CORE
-#define _IR_CORE
-
-#include <linux/spinlock.h>
-#include <linux/kfifo.h>
-#include <linux/time.h>
-#include <linux/timer.h>
-#include <media/rc-map.h>
-
-extern int ir_core_debug;
-#define IR_dprintk(level, fmt, arg...)	if (ir_core_debug >= level) \
-	printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
-
-enum rc_driver_type {
-	RC_DRIVER_SCANCODE = 0,	/* Driver or hardware generates a scancode */
-	RC_DRIVER_IR_RAW,	/* Needs a Infra-Red pulse/space decoder */
-};
-
-/**
- * struct ir_dev_props - Allow caller drivers to set special properties
- * @driver_type: specifies if the driver or hardware have already a decoder,
- *	or if it needs to use the IR raw event decoders to produce a scancode
- * @allowed_protos: bitmask with the supported IR_TYPE_* protocols
- * @scanmask: some hardware decoders are not capable of providing the full
- *	scancode to the application. As this is a hardware limit, we can't do
- *	anything with it. Yet, as the same keycode table can be used with other
- *	devices, a mask is provided to allow its usage. Drivers should generally
- *	leave this field in blank
- * @timeout: optional time after which device stops sending data
- * @min_timeout: minimum timeout supported by device
- * @max_timeout: maximum timeout supported by device
- * @rx_resolution : resolution (in ns) of input sampler
- * @tx_resolution: resolution (in ns) of output sampler
- * @priv: driver-specific data, to be used on the callbacks
- * @change_protocol: allow changing the protocol used on hardware decoders
- * @open: callback to allow drivers to enable polling/irq when IR input device
- *	is opened.
- * @close: callback to allow drivers to disable polling/irq when IR input device
- *	is opened.
- * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
- * @s_tx_carrier: set transmit carrier frequency
- * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
- * @s_rx_carrier: inform driver about carrier it is expected to handle
- * @tx_ir: transmit IR
- * @s_idle: optional: enable/disable hardware idle mode, upon which,
-	device doesn't interrupt host until it sees IR pulses
- * @s_learning_mode: enable wide band receiver used for learning
- * @s_carrier_report: enable carrier reports
- */
-struct ir_dev_props {
-	enum rc_driver_type	driver_type;
-	unsigned long		allowed_protos;
-	u32			scanmask;
-
-	u32			timeout;
-	u32			min_timeout;
-	u32			max_timeout;
-
-	u32			rx_resolution;
-	u32			tx_resolution;
-
-	void			*priv;
-	int			(*change_protocol)(void *priv, u64 ir_type);
-	int			(*open)(void *priv);
-	void			(*close)(void *priv);
-	int			(*s_tx_mask)(void *priv, u32 mask);
-	int			(*s_tx_carrier)(void *priv, u32 carrier);
-	int			(*s_tx_duty_cycle)(void *priv, u32 duty_cycle);
-	int			(*s_rx_carrier_range)(void *priv, u32 min, u32 max);
-	int			(*tx_ir)(void *priv, int *txbuf, u32 n);
-	void			(*s_idle)(void *priv, bool enable);
-	int			(*s_learning_mode)(void *priv, int enable);
-	int			(*s_carrier_report) (void *priv, int enable);
-};
-
-struct ir_input_dev {
-	struct device			dev;		/* device */
-	char				*driver_name;	/* Name of the driver module */
-	struct ir_scancode_table	rc_tab;		/* scan/key table */
-	unsigned long			devno;		/* device number */
-	struct ir_dev_props		*props;		/* Device properties */
-	struct ir_raw_event_ctrl	*raw;		/* for raw pulse/space events */
-	struct input_dev		*input_dev;	/* the input device associated with this device */
-	bool				idle;
-
-	/* key info - needed by IR keycode handlers */
-	spinlock_t			keylock;	/* protects the below members */
-	bool				keypressed;	/* current state */
-	unsigned long			keyup_jiffies;	/* when should the current keypress be released? */
-	struct timer_list		timer_keyup;	/* timer for releasing a keypress */
-	u32				last_keycode;	/* keycode of last command */
-	u32				last_scancode;	/* scancode of last command */
-	u8				last_toggle;	/* toggle of last command */
-};
-
-enum raw_event_type {
-	IR_SPACE        = (1 << 0),
-	IR_PULSE        = (1 << 1),
-	IR_START_EVENT  = (1 << 2),
-	IR_STOP_EVENT   = (1 << 3),
-};
-
-#define to_ir_input_dev(_attr) container_of(_attr, struct ir_input_dev, attr)
-
-/* From ir-keytable.c */
-int __ir_input_register(struct input_dev *dev,
-		      const struct ir_scancode_table *ir_codes,
-		      struct ir_dev_props *props,
-		      const char *driver_name);
-
-static inline int ir_input_register(struct input_dev *dev,
-		      const char *map_name,
-		      struct ir_dev_props *props,
-		      const char *driver_name) {
-	struct ir_scancode_table *ir_codes;
-	struct ir_input_dev *ir_dev;
-	int rc;
-
-	if (!map_name)
-		return -EINVAL;
-
-	ir_codes = get_rc_map(map_name);
-	if (!ir_codes) {
-		ir_codes = get_rc_map(RC_MAP_EMPTY);
-
-		if (!ir_codes)
-			return -EINVAL;
-	}
-
-	rc = __ir_input_register(dev, ir_codes, props, driver_name);
-	if (rc < 0)
-		return -EINVAL;
-
-	ir_dev = input_get_drvdata(dev);
-
-	if (!rc && ir_dev->props && ir_dev->props->change_protocol)
-		rc = ir_dev->props->change_protocol(ir_dev->props->priv,
-						    ir_codes->ir_type);
-
-	return rc;
-}
-
-void ir_input_unregister(struct input_dev *input_dev);
-
-void ir_repeat(struct input_dev *dev);
-void ir_keydown(struct input_dev *dev, int scancode, u8 toggle);
-void ir_keyup(struct ir_input_dev *ir);
-u32 ir_g_keycode_from_table(struct input_dev *input_dev, u32 scancode);
-
-/* From ir-raw-event.c */
-
-struct ir_raw_event {
-	union {
-		u32             duration;
-
-		struct {
-			u32     carrier;
-			u8      duty_cycle;
-		};
-	};
-
-	unsigned                pulse:1;
-	unsigned                reset:1;
-	unsigned                timeout:1;
-	unsigned                carrier_report:1;
-};
-
-#define DEFINE_IR_RAW_EVENT(event) \
-	struct ir_raw_event event = { \
-		{ .duration = 0 } , \
-		.pulse = 0, \
-		.reset = 0, \
-		.timeout = 0, \
-		.carrier_report = 0 }
-
-static inline void init_ir_raw_event(struct ir_raw_event *ev)
-{
-	memset(ev, 0, sizeof(*ev));
-}
-
-#define IR_MAX_DURATION         0xFFFFFFFF      /* a bit more than 4 seconds */
-
-void ir_raw_event_handle(struct input_dev *input_dev);
-int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
-int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
-int ir_raw_event_store_with_filter(struct input_dev *input_dev,
-				struct ir_raw_event *ev);
-void ir_raw_event_set_idle(struct input_dev *input_dev, bool idle);
-
-static inline void ir_raw_event_reset(struct input_dev *input_dev)
-{
-	DEFINE_IR_RAW_EVENT(ev);
-	ev.reset = true;
-
-	ir_raw_event_store(input_dev, &ev);
-	ir_raw_event_handle(input_dev);
-}
-
-#endif /* _IR_CORE */
diff --git a/include/media/ir-kbd-i2c.h b/include/media/ir-kbd-i2c.h
index 557c676ab7d..768aa77925c 100644
--- a/include/media/ir-kbd-i2c.h
+++ b/include/media/ir-kbd-i2c.h
@@ -1,7 +1,7 @@
 #ifndef _IR_I2C
 #define _IR_I2C
 
-#include <media/ir-common.h>
+#include <media/rc-core.h>
 
 #define DEFAULT_POLLING_INTERVAL	100	/* ms */
 
@@ -9,11 +9,9 @@ struct IR_i2c;
 
 struct IR_i2c {
 	char		       *ir_codes;
-
 	struct i2c_client      *c;
-	struct input_dev       *input;
-	struct ir_input_state  ir;
-	u64                    ir_type;
+	struct rc_dev          *rc;
+
 	/* Used to avoid fast repeating */
 	unsigned char          old;
 
@@ -39,13 +37,16 @@ enum ir_kbd_get_key_fn {
 struct IR_i2c_init_data {
 	char			*ir_codes;
 	const char		*name;
-	u64			type; /* IR_TYPE_RC5, etc */
+	u64			type; /* RC_TYPE_RC5, etc */
 	u32			polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */
+
 	/*
 	 * Specify either a function pointer or a value indicating one of
 	 * ir_kbd_i2c's internal get_key functions
 	 */
 	int                    (*get_key)(struct IR_i2c*, u32*, u32*);
 	enum ir_kbd_get_key_fn internal_get_key_func;
+
+	struct rc_dev		*rc_dev;
 };
 #endif
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
index 54780a560d0..630e702c951 100644
--- a/include/media/lirc_dev.h
+++ b/include/media/lirc_dev.h
@@ -217,9 +217,9 @@ int lirc_dev_fop_open(struct inode *inode, struct file *file);
 int lirc_dev_fop_close(struct inode *inode, struct file *file);
 unsigned int lirc_dev_fop_poll(struct file *file, poll_table *wait);
 long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
-ssize_t lirc_dev_fop_read(struct file *file, char *buffer, size_t length,
+ssize_t lirc_dev_fop_read(struct file *file, char __user *buffer, size_t length,
 			  loff_t *ppos);
-ssize_t lirc_dev_fop_write(struct file *file, const char *buffer, size_t length,
-			   loff_t *ppos);
+ssize_t lirc_dev_fop_write(struct file *file, const char __user *buffer,
+			   size_t length, loff_t *ppos);
 
 #endif
diff --git a/include/media/ovcamchip.h b/include/media/ovcamchip.h
deleted file mode 100644
index 05b9569ef1c..00000000000
--- a/include/media/ovcamchip.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* OmniVision* camera chip driver API
- *
- * Copyright (c) 1999-2004 Mark McClelland
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
- *
- * * OmniVision is a trademark of OmniVision Technologies, Inc. This driver
- * is not sponsored or developed by them.
- */
-
-#ifndef __LINUX_OVCAMCHIP_H
-#define __LINUX_OVCAMCHIP_H
-
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-
-/* --------------------------------- */
-/*           ENUMERATIONS            */
-/* --------------------------------- */
-
-/* Controls */
-enum {
-	OVCAMCHIP_CID_CONT,		/* Contrast */
-	OVCAMCHIP_CID_BRIGHT,		/* Brightness */
-	OVCAMCHIP_CID_SAT,		/* Saturation */
-	OVCAMCHIP_CID_HUE,		/* Hue */
-	OVCAMCHIP_CID_EXP,		/* Exposure */
-	OVCAMCHIP_CID_FREQ,		/* Light frequency */
-	OVCAMCHIP_CID_BANDFILT,		/* Banding filter */
-	OVCAMCHIP_CID_AUTOBRIGHT,	/* Auto brightness */
-	OVCAMCHIP_CID_AUTOEXP,		/* Auto exposure */
-	OVCAMCHIP_CID_BACKLIGHT,	/* Back light compensation */
-	OVCAMCHIP_CID_MIRROR,		/* Mirror horizontally */
-};
-
-/* Chip types */
-#define NUM_CC_TYPES	9
-enum {
-	CC_UNKNOWN,
-	CC_OV76BE,
-	CC_OV7610,
-	CC_OV7620,
-	CC_OV7620AE,
-	CC_OV6620,
-	CC_OV6630,
-	CC_OV6630AE,
-	CC_OV6630AF,
-};
-
-/* --------------------------------- */
-/*           I2C ADDRESSES           */
-/* --------------------------------- */
-
-#define OV7xx0_SID   (0x42 >> 1)
-#define OV6xx0_SID   (0xC0 >> 1)
-
-/* --------------------------------- */
-/*                API                */
-/* --------------------------------- */
-
-struct ovcamchip_control {
-	__u32 id;
-	__s32 value;
-};
-
-struct ovcamchip_window {
-	int x;
-	int y;
-	int width;
-	int height;
-	int format;
-	int quarter;		/* Scale width and height down 2x */
-
-	/* This stuff will be removed eventually */
-	int clockdiv;		/* Clock divisor setting */
-};
-
-/* Commands */
-#define OVCAMCHIP_CMD_Q_SUBTYPE     _IOR  (0x88, 0x00, int)
-#define OVCAMCHIP_CMD_INITIALIZE    _IOW  (0x88, 0x01, int)
-/* You must call OVCAMCHIP_CMD_INITIALIZE before any of commands below! */
-#define OVCAMCHIP_CMD_S_CTRL        _IOW  (0x88, 0x02, struct ovcamchip_control)
-#define OVCAMCHIP_CMD_G_CTRL        _IOWR (0x88, 0x03, struct ovcamchip_control)
-#define OVCAMCHIP_CMD_S_MODE        _IOW  (0x88, 0x04, struct ovcamchip_window)
-#define OVCAMCHIP_MAX_CMD           _IO   (0x88, 0x3f)
-
-#endif
diff --git a/include/media/rc-core.h b/include/media/rc-core.h
new file mode 100644
index 00000000000..a23c1fc685a
--- /dev/null
+++ b/include/media/rc-core.h
@@ -0,0 +1,220 @@
+/*
+ * Remote Controller core header
+ *
+ * Copyright (C) 2009-2010 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ */
+
+#ifndef _RC_CORE
+#define _RC_CORE
+
+#include <linux/spinlock.h>
+#include <linux/kfifo.h>
+#include <linux/time.h>
+#include <linux/timer.h>
+#include <media/rc-map.h>
+
+extern int rc_core_debug;
+#define IR_dprintk(level, fmt, arg...)	if (rc_core_debug >= level) \
+	printk(KERN_DEBUG "%s: " fmt , __func__, ## arg)
+
+enum rc_driver_type {
+	RC_DRIVER_SCANCODE = 0,	/* Driver or hardware generates a scancode */
+	RC_DRIVER_IR_RAW,	/* Needs a Infra-Red pulse/space decoder */
+};
+
+/**
+ * struct rc_dev - represents a remote control device
+ * @dev: driver model's view of this device
+ * @input_name: name of the input child device
+ * @input_phys: physical path to the input child device
+ * @input_id: id of the input child device (struct input_id)
+ * @driver_name: name of the hardware driver which registered this device
+ * @map_name: name of the default keymap
+ * @rc_map: current scan/key table
+ * @devno: unique remote control device number
+ * @raw: additional data for raw pulse/space devices
+ * @input_dev: the input child device used to communicate events to userspace
+ * @driver_type: specifies if protocol decoding is done in hardware or software 
+ * @idle: used to keep track of RX state
+ * @allowed_protos: bitmask with the supported RC_TYPE_* protocols
+ * @scanmask: some hardware decoders are not capable of providing the full
+ *	scancode to the application. As this is a hardware limit, we can't do
+ *	anything with it. Yet, as the same keycode table can be used with other
+ *	devices, a mask is provided to allow its usage. Drivers should generally
+ *	leave this field in blank
+ * @priv: driver-specific data
+ * @keylock: protects the remaining members of the struct
+ * @keypressed: whether a key is currently pressed
+ * @keyup_jiffies: time (in jiffies) when the current keypress should be released
+ * @timer_keyup: timer for releasing a keypress
+ * @last_keycode: keycode of last keypress
+ * @last_scancode: scancode of last keypress
+ * @last_toggle: toggle value of last command
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
+ * @rx_resolution : resolution (in ns) of input sampler
+ * @tx_resolution: resolution (in ns) of output sampler
+ * @change_protocol: allow changing the protocol used on hardware decoders
+ * @open: callback to allow drivers to enable polling/irq when IR input device
+ *	is opened.
+ * @close: callback to allow drivers to disable polling/irq when IR input device
+ *	is opened.
+ * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
+ * @s_tx_carrier: set transmit carrier frequency
+ * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%)
+ * @s_rx_carrier: inform driver about carrier it is expected to handle
+ * @tx_ir: transmit IR
+ * @s_idle: enable/disable hardware idle mode, upon which,
+ *	device doesn't interrupt host until it sees IR pulses
+ * @s_learning_mode: enable wide band receiver used for learning
+ * @s_carrier_report: enable carrier reports
+ */
+struct rc_dev {
+	struct device			dev;
+	const char			*input_name;
+	const char			*input_phys;
+	struct input_id			input_id;
+	char				*driver_name;
+	const char			*map_name;
+	struct rc_map	rc_map;
+	unsigned long			devno;
+	struct ir_raw_event_ctrl	*raw;
+	struct input_dev		*input_dev;
+	enum rc_driver_type		driver_type;
+	bool				idle;
+	u64				allowed_protos;
+	u32				scanmask;
+	void				*priv;
+	spinlock_t			keylock;
+	bool				keypressed;
+	unsigned long			keyup_jiffies;
+	struct timer_list		timer_keyup;
+	u32				last_keycode;
+	u32				last_scancode;
+	u8				last_toggle;
+	u32				timeout;
+	u32				min_timeout;
+	u32				max_timeout;
+	u32				rx_resolution;
+	u32				tx_resolution;
+	int				(*change_protocol)(struct rc_dev *dev, u64 rc_type);
+	int				(*open)(struct rc_dev *dev);
+	void				(*close)(struct rc_dev *dev);
+	int				(*s_tx_mask)(struct rc_dev *dev, u32 mask);
+	int				(*s_tx_carrier)(struct rc_dev *dev, u32 carrier);
+	int				(*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle);
+	int				(*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max);
+	int				(*tx_ir)(struct rc_dev *dev, int *txbuf, u32 n);
+	void				(*s_idle)(struct rc_dev *dev, bool enable);
+	int				(*s_learning_mode)(struct rc_dev *dev, int enable);
+	int				(*s_carrier_report) (struct rc_dev *dev, int enable);
+};
+
+#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
+
+/*
+ * From rc-main.c
+ * Those functions can be used on any type of Remote Controller. They
+ * basically creates an input_dev and properly reports the device as a
+ * Remote Controller, at sys/class/rc.
+ */
+
+struct rc_dev *rc_allocate_device(void);
+void rc_free_device(struct rc_dev *dev);
+int rc_register_device(struct rc_dev *dev);
+void rc_unregister_device(struct rc_dev *dev);
+
+void rc_repeat(struct rc_dev *dev);
+void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keyup(struct rc_dev *dev);
+u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
+
+/*
+ * From rc-raw.c
+ * The Raw interface is specific to InfraRed. It may be a good idea to
+ * split it later into a separate header.
+ */
+
+enum raw_event_type {
+	IR_SPACE        = (1 << 0),
+	IR_PULSE        = (1 << 1),
+	IR_START_EVENT  = (1 << 2),
+	IR_STOP_EVENT   = (1 << 3),
+};
+
+struct ir_raw_event {
+	union {
+		u32             duration;
+
+		struct {
+			u32     carrier;
+			u8      duty_cycle;
+		};
+	};
+
+	unsigned                pulse:1;
+	unsigned                reset:1;
+	unsigned                timeout:1;
+	unsigned                carrier_report:1;
+};
+
+#define DEFINE_IR_RAW_EVENT(event) \
+	struct ir_raw_event event = { \
+		{ .duration = 0 } , \
+		.pulse = 0, \
+		.reset = 0, \
+		.timeout = 0, \
+		.carrier_report = 0 }
+
+static inline void init_ir_raw_event(struct ir_raw_event *ev)
+{
+	memset(ev, 0, sizeof(*ev));
+}
+
+#define IR_MAX_DURATION         0xFFFFFFFF      /* a bit more than 4 seconds */
+
+void ir_raw_event_handle(struct rc_dev *dev);
+int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev);
+int ir_raw_event_store_edge(struct rc_dev *dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct rc_dev *dev,
+				struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct rc_dev *dev, bool idle);
+
+static inline void ir_raw_event_reset(struct rc_dev *dev)
+{
+	DEFINE_IR_RAW_EVENT(ev);
+	ev.reset = true;
+
+	ir_raw_event_store(dev, &ev);
+	ir_raw_event_handle(dev);
+}
+
+/* extract mask bits out of data and pack them into the result */
+static inline u32 ir_extract_bits(u32 data, u32 mask)
+{
+	u32 vbit = 1, value = 0;
+
+	do {
+		if (mask & 1) {
+			if (data & 1)
+				value |= vbit;
+			vbit <<= 1;
+		}
+		data >>= 1;
+	} while (mask >>= 1);
+
+	return value;
+}
+
+#endif /* _RC_CORE */
diff --git a/include/media/rc-map.h b/include/media/rc-map.h
index e0f17edf38e..ee9e2f747c7 100644
--- a/include/media/rc-map.h
+++ b/include/media/rc-map.h
@@ -11,45 +11,45 @@
 
 #include <linux/input.h>
 
-#define IR_TYPE_UNKNOWN	0
-#define IR_TYPE_RC5	(1  << 0)	/* Philips RC5 protocol */
-#define IR_TYPE_NEC	(1  << 1)
-#define IR_TYPE_RC6	(1  << 2)	/* Philips RC6 protocol */
-#define IR_TYPE_JVC	(1  << 3)	/* JVC protocol */
-#define IR_TYPE_SONY	(1  << 4)	/* Sony12/15/20 protocol */
-#define IR_TYPE_RC5_SZ	(1  << 5)	/* RC5 variant used by Streamzap */
-#define IR_TYPE_LIRC	(1  << 30)	/* Pass raw IR to lirc userspace */
-#define IR_TYPE_OTHER	(1u << 31)
+#define RC_TYPE_UNKNOWN	0
+#define RC_TYPE_RC5	(1  << 0)	/* Philips RC5 protocol */
+#define RC_TYPE_NEC	(1  << 1)
+#define RC_TYPE_RC6	(1  << 2)	/* Philips RC6 protocol */
+#define RC_TYPE_JVC	(1  << 3)	/* JVC protocol */
+#define RC_TYPE_SONY	(1  << 4)	/* Sony12/15/20 protocol */
+#define RC_TYPE_RC5_SZ	(1  << 5)	/* RC5 variant used by Streamzap */
+#define RC_TYPE_LIRC	(1  << 30)	/* Pass raw IR to lirc userspace */
+#define RC_TYPE_OTHER	(1u << 31)
 
-#define IR_TYPE_ALL (IR_TYPE_RC5 | IR_TYPE_NEC  | IR_TYPE_RC6  | \
-		     IR_TYPE_JVC | IR_TYPE_SONY | IR_TYPE_LIRC | \
-		     IR_TYPE_RC5_SZ | IR_TYPE_OTHER)
+#define RC_TYPE_ALL (RC_TYPE_RC5 | RC_TYPE_NEC  | RC_TYPE_RC6  | \
+		     RC_TYPE_JVC | RC_TYPE_SONY | RC_TYPE_LIRC | \
+		     RC_TYPE_RC5_SZ | RC_TYPE_OTHER)
 
-struct ir_scancode {
+struct rc_map_table {
 	u32	scancode;
 	u32	keycode;
 };
 
-struct ir_scancode_table {
-	struct ir_scancode	*scan;
+struct rc_map {
+	struct rc_map_table	*scan;
 	unsigned int		size;	/* Max number of entries */
 	unsigned int		len;	/* Used number of entries */
 	unsigned int		alloc;	/* Size of *scan in bytes */
-	u64			ir_type;
+	u64			rc_type;
 	const char		*name;
 	spinlock_t		lock;
 };
 
-struct rc_keymap {
+struct rc_map_list {
 	struct list_head	 list;
-	struct ir_scancode_table map;
+	struct rc_map map;
 };
 
 /* Routines from rc-map.c */
 
-int ir_register_map(struct rc_keymap *map);
-void ir_unregister_map(struct rc_keymap *map);
-struct ir_scancode_table *get_rc_map(const char *name);
+int rc_map_register(struct rc_map_list *map);
+void rc_map_unregister(struct rc_map_list *map);
+struct rc_map *rc_map_get(const char *name);
 void rc_map_init(void);
 
 /* Names of the several keytables defined in-kernel */
@@ -119,6 +119,7 @@ void rc_map_init(void);
 #define RC_MAP_PINNACLE_PCTV_HD          "rc-pinnacle-pctv-hd"
 #define RC_MAP_PIXELVIEW_NEW             "rc-pixelview-new"
 #define RC_MAP_PIXELVIEW                 "rc-pixelview"
+#define RC_MAP_PIXELVIEW_002T		 "rc-pixelview-002t"
 #define RC_MAP_PIXELVIEW_MK12            "rc-pixelview-mk12"
 #define RC_MAP_POWERCOLOR_REAL_ANGEL     "rc-powercolor-real-angel"
 #define RC_MAP_PROTEUS_2309              "rc-proteus-2309"
@@ -137,6 +138,7 @@ void rc_map_init(void);
 #define RC_MAP_TREKSTOR                  "rc-trekstor"
 #define RC_MAP_TT_1500                   "rc-tt-1500"
 #define RC_MAP_TWINHAN_VP1027_DVBS       "rc-twinhan1027"
+#define RC_MAP_VIDEOMATE_M1F             "rc-videomate-m1f"
 #define RC_MAP_VIDEOMATE_S350            "rc-videomate-s350"
 #define RC_MAP_VIDEOMATE_TV_PVR          "rc-videomate-tv-pvr"
 #define RC_MAP_WINFAST                   "rc-winfast"
diff --git a/include/media/rds.h b/include/media/saa6588.h
index a8942666761..2c3c4420a4e 100644
--- a/include/media/rds.h
+++ b/include/media/saa6588.h
@@ -4,9 +4,6 @@
     saa6588.c and every driver (e.g. bttv-driver.c) that wants
     to use the saa6588 module.
 
-    Instead of having a separate rds.h, I'd prefer to include
-    this stuff in one of the already existing files like tuner.h
-
     (c) 2005 by Hans J. Koch
 
     This program is free software; you can redistribute it and/or modify
@@ -25,10 +22,10 @@
 
 */
 
-#ifndef _RDS_H
-#define _RDS_H
+#ifndef _SAA6588_H
+#define _SAA6588_H
 
-struct rds_command {
+struct saa6588_command {
 	unsigned int  block_count;
 	int           result;
 	unsigned char __user *buffer;
@@ -36,9 +33,10 @@ struct rds_command {
 	poll_table    *event_list;
 };
 
-#define RDS_CMD_OPEN	_IOW('R',1,int)
-#define RDS_CMD_CLOSE	_IOW('R',2,int)
-#define RDS_CMD_READ	_IOR('R',3,int)
-#define RDS_CMD_POLL	_IOR('R',4,int)
+/* These ioctls are internal to the kernel */
+#define SAA6588_CMD_OPEN	_IOW('R', 1, int)
+#define SAA6588_CMD_CLOSE	_IOW('R', 2, int)
+#define SAA6588_CMD_READ	_IOR('R', 3, int)
+#define SAA6588_CMD_POLL	_IOR('R', 4, int)
 
 #endif
diff --git a/include/media/saa7146.h b/include/media/saa7146.h
index 7a9f76ecbbb..ac7ce00f39c 100644
--- a/include/media/saa7146.h
+++ b/include/media/saa7146.h
@@ -161,7 +161,7 @@ extern struct list_head saa7146_devices;
 extern struct mutex saa7146_devices_lock;
 int saa7146_register_extension(struct saa7146_extension*);
 int saa7146_unregister_extension(struct saa7146_extension*);
-struct saa7146_format* format_by_fourcc(struct saa7146_dev *dev, int fourcc);
+struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
 int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
 void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
 int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
diff --git a/include/media/si4713.h b/include/media/si4713.h
index 99850a54ed0..ed7353e8a98 100644
--- a/include/media/si4713.h
+++ b/include/media/si4713.h
@@ -23,8 +23,7 @@
  * Platform dependent definition
  */
 struct si4713_platform_data {
-	/* Set power state, zero is off, non-zero is on. */
-	int (*set_power)(int power);
+	int gpio_reset; /* < 0 if not used */
 };
 
 /*
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 86e3631764e..9386db829fb 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -97,6 +97,7 @@ struct soc_camera_host_ops {
 #define SOCAM_SENSOR_INVERT_DATA	(1 << 4)
 
 struct i2c_board_info;
+struct regulator_bulk_data;
 
 struct soc_camera_link {
 	/* Camera bus id, used to match a camera and a bus */
@@ -108,6 +109,10 @@ struct soc_camera_link {
 	const char *module_name;
 	void *priv;
 
+	/* Optional regulators that have to be managed on power on/off events */
+	struct regulator_bulk_data *regulators;
+	int num_regulators;
+
 	/*
 	 * For non-I2C devices platform platform has to provide methods to
 	 * add a device to the system and to remove
diff --git a/include/media/timb_radio.h b/include/media/timb_radio.h
index fcd32a3696b..a59a84854dc 100644
--- a/include/media/timb_radio.h
+++ b/include/media/timb_radio.h
@@ -24,7 +24,6 @@
 struct timb_radio_platform_data {
 	int i2c_adapter; /* I2C adapter where the tuner and dsp are attached */
 	struct {
-		const char *module_name;
 		struct i2c_board_info *info;
 	} tuner;
 	struct {
diff --git a/drivers/spi/xilinx_spi.h b/include/media/timb_video.h
index d211accf68d..70ae43970a4 100644
--- a/drivers/spi/xilinx_spi.h
+++ b/include/media/timb_video.h
@@ -1,7 +1,6 @@
 /*
- * Xilinx SPI device driver API and platform data header file
- *
- * Copyright (c) 2009 Intel Corporation
+ * timb_video.h Platform struct for the Timberdale video driver
+ * Copyright (c) 2009-2010 Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -17,16 +16,18 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef _XILINX_SPI_H_
-#define _XILINX_SPI_H_
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
+#ifndef _TIMB_VIDEO_
+#define _TIMB_VIDEO_ 1
 
-#define XILINX_SPI_NAME "xilinx_spi"
+#include <linux/i2c.h>
 
-struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
-	u32 irq, s16 bus_num);
+struct timb_video_platform_data {
+	int dma_channel;
+	int i2c_adapter; /* The I2C adapter where the encoder is attached */
+	struct {
+		const char *module_name;
+		struct i2c_board_info *info;
+	} encoder;
+};
 
-void xilinx_spi_deinit(struct spi_master *master);
 #endif
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 51e89f2267b..44fe44ec9ea 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -74,6 +74,7 @@ enum {
 	V4L2_IDENT_SOI968 = 256,
 	V4L2_IDENT_OV9640 = 257,
 	V4L2_IDENT_OV6650 = 258,
+	V4L2_IDENT_OV2640 = 259,
 
 	/* module saa7146: reserved range 300-309 */
 	V4L2_IDENT_SAA7146 = 300,
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 41dd480e45f..2d65b35cdab 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -98,12 +98,12 @@ int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local);
 /* Control helper functions */
 
 int v4l2_ctrl_check(struct v4l2_ext_control *ctrl, struct v4l2_queryctrl *qctrl,
-		const char **menu_items);
+		const char * const *menu_items);
 const char *v4l2_ctrl_get_name(u32 id);
-const char **v4l2_ctrl_get_menu(u32 id);
+const char * const *v4l2_ctrl_get_menu(u32 id);
 int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, s32 min, s32 max, s32 step, s32 def);
 int v4l2_ctrl_query_menu(struct v4l2_querymenu *qmenu,
-		struct v4l2_queryctrl *qctrl, const char **menu_items);
+		struct v4l2_queryctrl *qctrl, const char * const *menu_items);
 #define V4L2_CTRL_MENU_IDS_END (0xffffffff)
 int v4l2_ctrl_query_menu_valid_items(struct v4l2_querymenu *qmenu, const u32 *ids);
 
@@ -137,31 +137,27 @@ struct v4l2_subdev_ops;
 
 
 /* Load an i2c module and return an initialized v4l2_subdev struct.
-   Only call request_module if module_name != NULL.
    The client_type argument is the name of the chip that's on the adapter. */
 struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter,
-		const char *module_name, const char *client_type,
+		struct i2c_adapter *adapter, const char *client_type,
 		int irq, void *platform_data,
 		u8 addr, const unsigned short *probe_addrs);
 
 /* Load an i2c module and return an initialized v4l2_subdev struct.
-   Only call request_module if module_name != NULL.
    The client_type argument is the name of the chip that's on the adapter. */
 static inline struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter,
-		const char *module_name, const char *client_type,
+		struct i2c_adapter *adapter, const char *client_type,
 		u8 addr, const unsigned short *probe_addrs)
 {
-	return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, module_name,
-				client_type, 0, NULL, addr, probe_addrs);
+	return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, client_type, 0, NULL,
+				       addr, probe_addrs);
 }
 
 struct i2c_board_info;
 
 struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
-		struct i2c_adapter *adapter, const char *module_name,
-		struct i2c_board_info *info, const unsigned short *probe_addrs);
+		struct i2c_adapter *adapter, struct i2c_board_info *info,
+		const unsigned short *probe_addrs);
 
 /* Initialize an v4l2_subdev with data from an i2c_client struct */
 void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 9b7bea928a8..d69ab4aae03 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -112,7 +112,7 @@ struct v4l2_ctrl {
 		u32 step;
 		u32 menu_skip_mask;
 	};
-	const char **qmenu;
+	const char * const *qmenu;
 	unsigned long flags;
 	union {
 		s32 val;
@@ -202,7 +202,7 @@ struct v4l2_ctrl_config {
 	s32 def;
 	u32 flags;
 	u32 menu_skip_mask;
-	const char **qmenu;
+	const char * const *qmenu;
 	unsigned int is_private:1;
 	unsigned int is_volatile:1;
 };
diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h
index 6648036b728..b16f307d471 100644
--- a/include/media/v4l2-device.h
+++ b/include/media/v4l2-device.h
@@ -51,6 +51,8 @@ struct v4l2_device {
 			unsigned int notification, void *arg);
 	/* The control handler. May be NULL. */
 	struct v4l2_ctrl_handler *ctrl_handler;
+	/* BKL replacement mutex. Temporary solution only. */
+	struct mutex ioctl_lock;
 };
 
 /* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev.
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index 06daa6e8e05..67df37542c6 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -14,12 +14,7 @@
 #include <linux/device.h>
 #include <linux/mutex.h>
 #include <linux/compiler.h> /* need __user */
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#define __MIN_V4L1
-#include <linux/videodev.h>
-#else
 #include <linux/videodev2.h>
-#endif
 
 struct v4l2_fh;
 
@@ -113,10 +108,6 @@ struct v4l2_ioctl_ops {
 
 
 	int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-			/* buffer type is struct vidio_mbuf * */
-	int (*vidiocgmbuf)  (struct file *file, void *fh, struct video_mbuf *p);
-#endif
 	int (*vidioc_g_fbuf)   (struct file *file, void *fh,
 				struct v4l2_framebuffer *a);
 	int (*vidioc_s_fbuf)   (struct file *file, void *fh,
@@ -300,22 +291,15 @@ extern void v4l_printk_ioctl(unsigned int cmd);
 extern const char *v4l2_field_names[];
 extern const char *v4l2_type_names[];
 
-/*  Compatibility layer interface  --  v4l1-compat module */
-typedef long (*v4l2_kioctl)(struct file *file,
-			   unsigned int cmd, void *arg);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-long v4l_compat_translate_ioctl(struct file *file,
-			       int cmd, void *arg, v4l2_kioctl driver_ioctl);
-#else
-#define v4l_compat_translate_ioctl(file, cmd, arg, ioctl) (-EINVAL)
-#endif
-
 #ifdef CONFIG_COMPAT
 /* 32 Bits compatibility layer for 64 bits processors */
 extern long v4l2_compat_ioctl32(struct file *file, unsigned int cmd,
 				unsigned long arg);
 #endif
 
+typedef long (*v4l2_kioctl)(struct file *file,
+		unsigned int cmd, void *arg);
+
 /* Include support for obsoleted stuff */
 extern long video_usercopy(struct file *file, unsigned int cmd,
 				unsigned long arg, v4l2_kioctl func);
diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h
index 1d3835fc26b..90ed895e217 100644
--- a/include/media/videobuf-core.h
+++ b/include/media/videobuf-core.h
@@ -17,10 +17,6 @@
 #define _VIDEOBUF_CORE_H
 
 #include <linux/poll.h>
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#define __MIN_V4L1
-#include <linux/videodev.h>
-#endif
 #include <linux/videodev2.h>
 
 #define UNSET (-1U)
@@ -212,10 +208,6 @@ int videobuf_qbuf(struct videobuf_queue *q,
 		  struct v4l2_buffer *b);
 int videobuf_dqbuf(struct videobuf_queue *q,
 		   struct v4l2_buffer *b, int nonblocking);
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-int videobuf_cgmbuf(struct videobuf_queue *q,
-		    struct video_mbuf *mbuf, int count);
-#endif
 int videobuf_streamon(struct videobuf_queue *q);
 int videobuf_streamoff(struct videobuf_queue *q);
 
diff --git a/include/media/wm8775.h b/include/media/wm8775.h
index a1c4d417dfa..60739c5a23a 100644
--- a/include/media/wm8775.h
+++ b/include/media/wm8775.h
@@ -32,7 +32,4 @@
 #define WM8775_AIN3 4
 #define WM8775_AIN4 8
 
-/* subdev group ID */
-#define WM8775_GID (1 << 0)
-
 #endif
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index a9441249306..23710aa6a18 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -1,8 +1,6 @@
 #ifndef _ADDRCONF_H
 #define _ADDRCONF_H
 
-#define RETRANS_TIMER	HZ
-
 #define MAX_RTR_SOLICITATIONS		3
 #define RTR_SOLICITATION_INTERVAL	(4*HZ)
 
diff --git a/include/net/af_unix.h b/include/net/af_unix.h
index 90c9e2872f2..18e5c3f6758 100644
--- a/include/net/af_unix.h
+++ b/include/net/af_unix.h
@@ -10,6 +10,7 @@ extern void unix_inflight(struct file *fp);
 extern void unix_notinflight(struct file *fp);
 extern void unix_gc(void);
 extern void wait_for_unix_gc(void);
+extern struct sock *unix_get_socket(struct file *filp);
 
 #define UNIX_HASH_SIZE	256
 
@@ -56,6 +57,7 @@ struct unix_sock {
 	spinlock_t		lock;
 	unsigned int		gc_candidate : 1;
 	unsigned int		gc_maybe_cycle : 1;
+	unsigned char		recursion_level;
 	struct socket_wq	peer_wq;
 };
 #define unix_sk(__sk) ((struct unix_sock *)__sk)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index d81ea799770..0c5e72503b7 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -144,6 +144,7 @@ struct bt_skb_cb {
 	__u8 tx_seq;
 	__u8 retries;
 	__u8 sar;
+	unsigned short channel;
 };
 #define bt_cb(skb) ((struct bt_skb_cb *)((skb)->cb))
 
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index e30e0083434..29a7a8ca043 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1,4 +1,4 @@
-/* 
+/*
    BlueZ - Bluetooth protocol stack for Linux
    Copyright (C) 2000-2001 Qualcomm Incorporated
 
@@ -12,13 +12,13 @@
    OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
    IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
-   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
-   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
-   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
-   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
    SOFTWARE IS DISCLAIMED.
 */
 
@@ -489,7 +489,7 @@ struct hci_rp_read_local_name {
 
 #define HCI_OP_WRITE_PG_TIMEOUT		0x0c18
 
-#define HCI_OP_WRITE_SCAN_ENABLE 	0x0c1a
+#define HCI_OP_WRITE_SCAN_ENABLE	0x0c1a
 	#define SCAN_DISABLED		0x00
 	#define SCAN_INQUIRY		0x01
 	#define SCAN_PAGE		0x02
@@ -874,7 +874,7 @@ struct hci_ev_si_security {
 
 struct hci_command_hdr {
 	__le16	opcode;		/* OCF & OGF */
-	__u8 	plen;
+	__u8	plen;
 } __packed;
 
 struct hci_event_hdr {
@@ -934,9 +934,13 @@ static inline struct hci_sco_hdr *hci_sco_hdr(const struct sk_buff *skb)
 struct sockaddr_hci {
 	sa_family_t    hci_family;
 	unsigned short hci_dev;
+	unsigned short hci_channel;
 };
 #define HCI_DEV_NONE	0xffff
 
+#define HCI_CHANNEL_RAW		0
+#define HCI_CHANNEL_CONTROL	1
+
 struct hci_filter {
 	unsigned long type_mask;
 	unsigned long event_mask[2];
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index ebec8c9a929..a29feb01854 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -44,15 +44,15 @@ struct inquiry_data {
 };
 
 struct inquiry_entry {
-	struct inquiry_entry 	*next;
+	struct inquiry_entry	*next;
 	__u32			timestamp;
 	struct inquiry_data	data;
 };
 
 struct inquiry_cache {
-	spinlock_t 		lock;
+	spinlock_t		lock;
 	__u32			timestamp;
-	struct inquiry_entry 	*list;
+	struct inquiry_entry	*list;
 };
 
 struct hci_conn_hash {
@@ -129,6 +129,7 @@ struct hci_dev {
 	wait_queue_head_t	req_wait_q;
 	__u32			req_status;
 	__u32			req_result;
+	__u16			req_last_cmd;
 
 	struct inquiry_cache	inq_cache;
 	struct hci_conn_hash	conn_hash;
@@ -141,7 +142,7 @@ struct hci_dev {
 	void			*driver_data;
 	void			*core_data;
 
-	atomic_t 		promisc;
+	atomic_t		promisc;
 
 	struct dentry		*debugfs;
 
@@ -150,7 +151,7 @@ struct hci_dev {
 
 	struct rfkill		*rfkill;
 
-	struct module 		*owner;
+	struct module		*owner;
 
 	int (*open)(struct hci_dev *hdev);
 	int (*close)(struct hci_dev *hdev);
@@ -215,8 +216,8 @@ extern rwlock_t hci_dev_list_lock;
 extern rwlock_t hci_cb_list_lock;
 
 /* ----- Inquiry cache ----- */
-#define INQUIRY_CACHE_AGE_MAX   (HZ*30)   // 30 seconds
-#define INQUIRY_ENTRY_AGE_MAX   (HZ*60)   // 60 seconds
+#define INQUIRY_CACHE_AGE_MAX   (HZ*30)   /* 30 seconds */
+#define INQUIRY_ENTRY_AGE_MAX   (HZ*60)   /* 60 seconds */
 
 #define inquiry_cache_lock(c)		spin_lock(&c->lock)
 #define inquiry_cache_unlock(c)		spin_unlock(&c->lock)
@@ -660,6 +661,11 @@ void hci_si_event(struct hci_dev *hdev, int type, int dlen, void *data);
 /* ----- HCI Sockets ----- */
 void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb);
 
+/* Management interface */
+int mgmt_control(struct sock *sk, struct msghdr *msg, size_t len);
+int mgmt_index_added(u16 index);
+int mgmt_index_removed(u16 index);
+
 /* HCI info for socket */
 #define hci_pi(sk) ((struct hci_pinfo *) sk)
 
@@ -668,6 +674,7 @@ struct hci_pinfo {
 	struct hci_dev    *hdev;
 	struct hci_filter filter;
 	__u32             cmsg_mask;
+	unsigned short   channel;
 };
 
 /* HCI security filter */
@@ -687,6 +694,6 @@ struct hci_sec_filter {
 #define hci_req_lock(d)		mutex_lock(&d->req_lock)
 #define hci_req_unlock(d)	mutex_unlock(&d->req_lock)
 
-void hci_req_complete(struct hci_dev *hdev, int result);
+void hci_req_complete(struct hci_dev *hdev, __u16 cmd, int result);
 
 #endif /* __HCI_CORE_H */
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index c819c8bf9b6..7ad25ca60ec 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -1,4 +1,4 @@
-/* 
+/*
    BlueZ - Bluetooth protocol stack for Linux
    Copyright (C) 2000-2001 Qualcomm Incorporated
    Copyright (C) 2009-2010 Gustavo F. Padovan <gustavo@padovan.org>
@@ -14,13 +14,13 @@
    OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
    IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
-   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
-   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
-   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
-   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
    SOFTWARE IS DISCLAIMED.
 */
 
@@ -417,11 +417,11 @@ static inline int l2cap_tx_window_full(struct sock *sk)
 	return sub == pi->remote_tx_win;
 }
 
-#define __get_txseq(ctrl) ((ctrl) & L2CAP_CTRL_TXSEQ) >> 1
-#define __get_reqseq(ctrl) ((ctrl) & L2CAP_CTRL_REQSEQ) >> 8
-#define __is_iframe(ctrl) !((ctrl) & L2CAP_CTRL_FRAME_TYPE)
-#define __is_sframe(ctrl) (ctrl) & L2CAP_CTRL_FRAME_TYPE
-#define __is_sar_start(ctrl) ((ctrl) & L2CAP_CTRL_SAR) == L2CAP_SDU_START
+#define __get_txseq(ctrl)	(((ctrl) & L2CAP_CTRL_TXSEQ) >> 1)
+#define __get_reqseq(ctrl)	(((ctrl) & L2CAP_CTRL_REQSEQ) >> 8)
+#define __is_iframe(ctrl)	(!((ctrl) & L2CAP_CTRL_FRAME_TYPE))
+#define __is_sframe(ctrl)	((ctrl) & L2CAP_CTRL_FRAME_TYPE)
+#define __is_sar_start(ctrl)	(((ctrl) & L2CAP_CTRL_SAR) == L2CAP_SDU_START)
 
 void l2cap_load(void);
 
diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
new file mode 100644
index 00000000000..ca29c1367ff
--- /dev/null
+++ b/include/net/bluetooth/mgmt.h
@@ -0,0 +1,87 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+
+   Copyright (C) 2010  Nokia Corporation
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+struct mgmt_hdr {
+	__le16 opcode;
+	__le16 len;
+} __packed;
+#define MGMT_HDR_SIZE			4
+
+#define MGMT_OP_READ_VERSION		0x0001
+struct mgmt_rp_read_version {
+	__u8 version;
+	__le16 revision;
+} __packed;
+
+#define MGMT_OP_READ_INDEX_LIST		0x0003
+struct mgmt_rp_read_index_list {
+	__le16 num_controllers;
+	__le16 index[0];
+} __packed;
+
+#define MGMT_OP_READ_INFO		0x0004
+struct mgmt_cp_read_info {
+	__le16 index;
+} __packed;
+struct mgmt_rp_read_info {
+	__le16 index;
+	__u8 type;
+	__u8 powered;
+	__u8 discoverable;
+	__u8 pairable;
+	__u8 sec_mode;
+	bdaddr_t bdaddr;
+	__u8 dev_class[3];
+	__u8 features[8];
+	__u16 manufacturer;
+	__u8 hci_ver;
+	__u16 hci_rev;
+} __packed;
+
+#define MGMT_EV_CMD_COMPLETE		0x0001
+struct mgmt_ev_cmd_complete {
+	__le16 opcode;
+	__u8 data[0];
+} __packed;
+
+#define MGMT_EV_CMD_STATUS		0x0002
+struct mgmt_ev_cmd_status {
+	__u8 status;
+	__le16 opcode;
+} __packed;
+
+#define MGMT_EV_CONTROLLER_ERROR	0x0003
+struct mgmt_ev_controller_error {
+	__le16 index;
+	__u8 error_code;
+} __packed;
+
+#define MGMT_EV_INDEX_ADDED		0x0004
+struct mgmt_ev_index_added {
+	__le16 index;
+} __packed;
+
+#define MGMT_EV_INDEX_REMOVED		0x0005
+struct mgmt_ev_index_removed {
+	__le16 index;
+} __packed;
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index 71047bc0af8..6eac4a760c3 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -1,5 +1,5 @@
-/* 
-   RFCOMM implementation for Linux Bluetooth stack (BlueZ).
+/*
+   RFCOMM implementation for Linux Bluetooth stack (BlueZ)
    Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com>
    Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org>
 
@@ -11,13 +11,13 @@
    OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
    IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
-   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
-   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
-   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
-   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
    SOFTWARE IS DISCLAIMED.
 */
 
@@ -105,7 +105,7 @@
 struct rfcomm_hdr {
 	u8 addr;
 	u8 ctrl;
-	u8 len;    // Actual size can be 2 bytes
+	u8 len;    /* Actual size can be 2 bytes */
 } __packed;
 
 struct rfcomm_cmd {
@@ -228,7 +228,7 @@ struct rfcomm_dlc {
 /* ---- RFCOMM SEND RPN ---- */
 int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci,
 			u8 bit_rate, u8 data_bits, u8 stop_bits,
-			u8 parity, u8 flow_ctrl_settings, 
+			u8 parity, u8 flow_ctrl_settings,
 			u8 xon_char, u8 xoff_char, u16 param_mask);
 
 /* ---- RFCOMM DLCs (channels) ---- */
diff --git a/include/net/bluetooth/sco.h b/include/net/bluetooth/sco.h
index e28a2a77147..1e35c43657c 100644
--- a/include/net/bluetooth/sco.h
+++ b/include/net/bluetooth/sco.h
@@ -1,4 +1,4 @@
-/* 
+/*
    BlueZ - Bluetooth protocol stack for Linux
    Copyright (C) 2000-2001 Qualcomm Incorporated
 
@@ -12,13 +12,13 @@
    OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
    IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
-   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES 
-   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 
-   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 
-   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS, 
-   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS 
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
    SOFTWARE IS DISCLAIMED.
 */
 
@@ -55,11 +55,11 @@ struct sco_conninfo {
 struct sco_conn {
 	struct hci_conn	*hcon;
 
-	bdaddr_t 	*dst;
-	bdaddr_t 	*src;
-	
+	bdaddr_t	*dst;
+	bdaddr_t	*src;
+
 	spinlock_t	lock;
-	struct sock 	*sk;
+	struct sock	*sk;
 
 	unsigned int    mtu;
 };
diff --git a/include/net/caif/cfctrl.h b/include/net/caif/cfctrl.h
index 9402543fc20..e54f6396fa4 100644
--- a/include/net/caif/cfctrl.h
+++ b/include/net/caif/cfctrl.h
@@ -51,7 +51,7 @@ struct cfctrl_rsp {
 	void (*restart_rsp)(void);
 	void (*radioset_rsp)(void);
 	void (*reject_rsp)(struct cflayer *layer, u8 linkid,
-				struct cflayer *client_layer);;
+				struct cflayer *client_layer);
 };
 
 /* Link Setup Parameters for CAIF-Links. */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 2a7936d7851..bcc9f448ec4 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -258,13 +258,9 @@ struct ieee80211_supported_band {
 
 /**
  * struct vif_params - describes virtual interface parameters
- * @mesh_id: mesh ID to use
- * @mesh_id_len: length of the mesh ID
  * @use_4addr: use 4-address frames
  */
 struct vif_params {
-       u8 *mesh_id;
-       int mesh_id_len;
        int use_4addr;
 };
 
@@ -424,6 +420,7 @@ struct station_parameters {
  * @STATION_INFO_TX_RETRIES: @tx_retries filled
  * @STATION_INFO_TX_FAILED: @tx_failed filled
  * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled
+ * @STATION_INFO_SIGNAL_AVG: @signal_avg filled
  */
 enum station_info_flags {
 	STATION_INFO_INACTIVE_TIME	= 1<<0,
@@ -439,6 +436,7 @@ enum station_info_flags {
 	STATION_INFO_TX_RETRIES		= 1<<10,
 	STATION_INFO_TX_FAILED		= 1<<11,
 	STATION_INFO_RX_DROP_MISC	= 1<<12,
+	STATION_INFO_SIGNAL_AVG		= 1<<13,
 };
 
 /**
@@ -485,6 +483,7 @@ struct rate_info {
  * @plid: mesh peer link id
  * @plink_state: mesh peer link state
  * @signal: signal strength of last received packet in dBm
+ * @signal_avg: signal strength average in dBm
  * @txrate: current unicast bitrate to this station
  * @rx_packets: packets received from this station
  * @tx_packets: packets transmitted to this station
@@ -505,6 +504,7 @@ struct station_info {
 	u16 plid;
 	u8 plink_state;
 	s8 signal;
+	s8 signal_avg;
 	struct rate_info txrate;
 	u32 rx_packets;
 	u32 tx_packets;
@@ -605,6 +605,8 @@ struct mpath_info {
  *	(or NULL for no change)
  * @basic_rates_len: number of basic rates
  * @ap_isolate: do not forward packets between connected stations
+ * @ht_opmode: HT Operation mode
+ * 	(u16 = opmode, -1 = do not change)
  */
 struct bss_parameters {
 	int use_cts_prot;
@@ -613,8 +615,14 @@ struct bss_parameters {
 	u8 *basic_rates;
 	u8 basic_rates_len;
 	int ap_isolate;
+	int ht_opmode;
 };
 
+/*
+ * struct mesh_config - 802.11s mesh configuration
+ *
+ * These parameters can be changed while the mesh is active.
+ */
 struct mesh_config {
 	/* Timeouts in ms */
 	/* Mesh plink management parameters */
@@ -624,6 +632,8 @@ struct mesh_config {
 	u16 dot11MeshMaxPeerLinks;
 	u8  dot11MeshMaxRetries;
 	u8  dot11MeshTTL;
+	/* ttl used in path selection information elements */
+	u8  element_ttl;
 	bool auto_open_plinks;
 	/* HWMP parameters */
 	u8  dot11MeshHWMPmaxPREQretries;
@@ -636,6 +646,26 @@ struct mesh_config {
 };
 
 /**
+ * struct mesh_setup - 802.11s mesh setup configuration
+ * @mesh_id: the mesh ID
+ * @mesh_id_len: length of the mesh ID, at least 1 and at most 32 bytes
+ * @path_sel_proto: which path selection protocol to use
+ * @path_metric: which metric to use
+ * @vendor_ie: vendor information elements (optional)
+ * @vendor_ie_len: length of vendor information elements
+ *
+ * These parameters are fixed when the mesh is created.
+ */
+struct mesh_setup {
+	const u8 *mesh_id;
+	u8 mesh_id_len;
+	u8  path_sel_proto;
+	u8  path_metric;
+	const u8 *vendor_ie;
+	u8 vendor_ie_len;
+};
+
+/**
  * struct ieee80211_txq_params - TX queue parameters
  * @queue: TX queue identifier (NL80211_TXQ_Q_*)
  * @txop: Maximum burst time in units of 32 usecs, 0 meaning disabled
@@ -923,6 +953,7 @@ struct cfg80211_disassoc_request {
  * @privacy: this is a protected network, keys will be configured
  *	after joining
  * @basic_rates: bitmap of basic rates to use when creating the IBSS
+ * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
  */
 struct cfg80211_ibss_params {
 	u8 *ssid;
@@ -934,6 +965,7 @@ struct cfg80211_ibss_params {
 	u32 basic_rates;
 	bool channel_fixed;
 	bool privacy;
+	int mcast_rate[IEEE80211_NUM_BANDS];
 };
 
 /**
@@ -1029,7 +1061,8 @@ struct cfg80211_pmksa {
  *
  * @add_virtual_intf: create a new virtual interface with the given name,
  *	must set the struct wireless_dev's iftype. Beware: You must create
- *	the new netdev in the wiphy's network namespace!
+ *	the new netdev in the wiphy's network namespace! Returns the netdev,
+ *	or an ERR_PTR.
  *
  * @del_virtual_intf: remove the virtual interface determined by ifindex.
  *
@@ -1071,9 +1104,9 @@ struct cfg80211_pmksa {
  * @get_mpath: get a mesh path for the given parameters
  * @dump_mpath: dump mesh path callback -- resume dump at index @idx
  *
- * @get_mesh_params: Put the current mesh parameters into *params
+ * @get_mesh_config: Get the current mesh configuration
  *
- * @set_mesh_params: Set mesh parameters.
+ * @update_mesh_config: Update mesh parameters on a running mesh.
  *	The mask is a bitfield which tells us which parameters to
  *	set, and which to leave alone.
  *
@@ -1132,7 +1165,9 @@ struct cfg80211_pmksa {
  * @cancel_remain_on_channel: Cancel an on-going remain-on-channel operation.
  *	This allows the operation to be terminated prior to timeout based on
  *	the duration value.
- * @mgmt_tx: Transmit a management frame
+ * @mgmt_tx: Transmit a management frame.
+ * @mgmt_tx_cancel_wait: Cancel the wait time from transmitting a management
+ *	frame on another channel
  *
  * @testmode_cmd: run a test mode command
  *
@@ -1150,14 +1185,23 @@ struct cfg80211_pmksa {
  * @mgmt_frame_register: Notify driver that a management frame type was
  *	registered. Note that this callback may not sleep, and cannot run
  *	concurrently with itself.
+ *
+ * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
+ *	Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
+ *	reject TX/RX mask combinations they cannot support by returning -EINVAL
+ *	(also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
+ *
+ * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy);
 	int	(*resume)(struct wiphy *wiphy);
 
-	int	(*add_virtual_intf)(struct wiphy *wiphy, char *name,
-				    enum nl80211_iftype type, u32 *flags,
-				    struct vif_params *params);
+	struct net_device * (*add_virtual_intf)(struct wiphy *wiphy,
+						char *name,
+						enum nl80211_iftype type,
+						u32 *flags,
+						struct vif_params *params);
 	int	(*del_virtual_intf)(struct wiphy *wiphy, struct net_device *dev);
 	int	(*change_virtual_intf)(struct wiphy *wiphy,
 				       struct net_device *dev,
@@ -1175,7 +1219,7 @@ struct cfg80211_ops {
 			   u8 key_index, bool pairwise, const u8 *mac_addr);
 	int	(*set_default_key)(struct wiphy *wiphy,
 				   struct net_device *netdev,
-				   u8 key_index);
+				   u8 key_index, bool unicast, bool multicast);
 	int	(*set_default_mgmt_key)(struct wiphy *wiphy,
 					struct net_device *netdev,
 					u8 key_index);
@@ -1210,12 +1254,17 @@ struct cfg80211_ops {
 	int	(*dump_mpath)(struct wiphy *wiphy, struct net_device *dev,
 			       int idx, u8 *dst, u8 *next_hop,
 			       struct mpath_info *pinfo);
-	int	(*get_mesh_params)(struct wiphy *wiphy,
+	int	(*get_mesh_config)(struct wiphy *wiphy,
 				struct net_device *dev,
 				struct mesh_config *conf);
-	int	(*set_mesh_params)(struct wiphy *wiphy,
-				struct net_device *dev,
-				const struct mesh_config *nconf, u32 mask);
+	int	(*update_mesh_config)(struct wiphy *wiphy,
+				      struct net_device *dev, u32 mask,
+				      const struct mesh_config *nconf);
+	int	(*join_mesh)(struct wiphy *wiphy, struct net_device *dev,
+			     const struct mesh_config *conf,
+			     const struct mesh_setup *setup);
+	int	(*leave_mesh)(struct wiphy *wiphy, struct net_device *dev);
+
 	int	(*change_bss)(struct wiphy *wiphy, struct net_device *dev,
 			      struct bss_parameters *params);
 
@@ -1289,10 +1338,13 @@ struct cfg80211_ops {
 					    u64 cookie);
 
 	int	(*mgmt_tx)(struct wiphy *wiphy, struct net_device *dev,
-			  struct ieee80211_channel *chan,
+			  struct ieee80211_channel *chan, bool offchan,
 			  enum nl80211_channel_type channel_type,
-			  bool channel_type_valid,
+			  bool channel_type_valid, unsigned int wait,
 			  const u8 *buf, size_t len, u64 *cookie);
+	int	(*mgmt_tx_cancel_wait)(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       u64 cookie);
 
 	int	(*set_power_mgmt)(struct wiphy *wiphy, struct net_device *dev,
 				  bool enabled, int timeout);
@@ -1304,6 +1356,9 @@ struct cfg80211_ops {
 	void	(*mgmt_frame_register)(struct wiphy *wiphy,
 				       struct net_device *dev,
 				       u16 frame_type, bool reg);
+
+	int	(*set_antenna)(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant);
+	int	(*get_antenna)(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant);
 };
 
 /*
@@ -1321,13 +1376,14 @@ struct cfg80211_ops {
  * 	initiator is %REGDOM_SET_BY_CORE).
  * @WIPHY_FLAG_STRICT_REGULATORY: tells us the driver for this device will
  *	ignore regulatory domain settings until it gets its own regulatory
- *	domain via its regulatory_hint(). After its gets its own regulatory
- *	domain it will only allow further regulatory domain settings to
- *	further enhance compliance. For example if channel 13 and 14 are
- *	disabled by this regulatory domain no user regulatory domain can
- *	enable these channels at a later time. This can be used for devices
- *	which do not have calibration information gauranteed for frequencies
- *	or settings outside of its regulatory domain.
+ *	domain via its regulatory_hint() unless the regulatory hint is
+ *	from a country IE. After its gets its own regulatory domain it will
+ *	only allow further regulatory domain settings to further enhance
+ *	compliance. For example if channel 13 and 14 are disabled by this
+ *	regulatory domain no user regulatory domain can enable these channels
+ *	at a later time. This can be used for devices which do not have
+ *	calibration information guaranteed for frequencies or settings
+ *	outside of its regulatory domain.
  * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure
  *	that passive scan flags and beaconing flags may not be lifted by
  *	cfg80211 due to regulatory beacon hints. For more information on beacon
@@ -1345,6 +1401,8 @@ struct cfg80211_ops {
  *	control port protocol ethertype. The device also honours the
  *	control_port_no_encrypt flag.
  * @WIPHY_FLAG_IBSS_RSN: The device supports IBSS RSN.
+ * @WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS: The device supports separate
+ *	unicast and multicast TX keys.
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
@@ -1355,7 +1413,8 @@ enum wiphy_flags {
 	WIPHY_FLAG_4ADDR_AP			= BIT(5),
 	WIPHY_FLAG_4ADDR_STATION		= BIT(6),
 	WIPHY_FLAG_CONTROL_PORT_PROTOCOL	= BIT(7),
-	WIPHY_FLAG_IBSS_RSN			= BIT(7),
+	WIPHY_FLAG_IBSS_RSN			= BIT(8),
+	WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS= BIT(9),
 };
 
 struct mac_address {
@@ -1368,7 +1427,9 @@ struct ieee80211_txrx_stypes {
 
 /**
  * struct wiphy - wireless hardware description
- * @reg_notifier: the driver's regulatory notification callback
+ * @reg_notifier: the driver's regulatory notification callback,
+ *	note that if your driver uses wiphy_apply_custom_regulatory()
+ *	the reg_notifier's request can be passed as NULL
  * @regd: the driver's regulatory domain, if one was requested via
  * 	the regulatory_hint() API. This can be used by the driver
  *	on the reg_notifier() if it chooses to ignore future
@@ -1420,6 +1481,17 @@ struct ieee80211_txrx_stypes {
  * @mgmt_stypes: bitmasks of frame subtypes that can be subscribed to or
  *	transmitted through nl80211, points to an array indexed by interface
  *	type
+ *
+ * @available_antennas_tx: bitmap of antennas which are available to be
+ *	configured as TX antennas. Antenna configuration commands will be
+ *	rejected unless this or @available_antennas_rx is set.
+ *
+ * @available_antennas_rx: bitmap of antennas which are available to be
+ *	configured as RX antennas. Antenna configuration commands will be
+ *	rejected unless this or @available_antennas_tx is set.
+ *
+ * @max_remain_on_channel_duration: Maximum time a remain-on-channel operation
+ *	may request, if implemented.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -1457,8 +1529,13 @@ struct wiphy {
 	char fw_version[ETHTOOL_BUSINFO_LEN];
 	u32 hw_version;
 
+	u16 max_remain_on_channel_duration;
+
 	u8 max_num_pmkids;
 
+	u32 available_antennas_tx;
+	u32 available_antennas_rx;
+
 	/* If multiple wiphys are registered and you're handed e.g.
 	 * a regular netdev with assigned ieee80211_ptr, you won't
 	 * know whether it points to a wiphy your driver has registered
@@ -1624,6 +1701,8 @@ struct cfg80211_cached_keys;
  * @bssid: (private) Used by the internal configuration code
  * @ssid: (private) Used by the internal configuration code
  * @ssid_len: (private) Used by the internal configuration code
+ * @mesh_id_len: (private) Used by the internal configuration code
+ * @mesh_id_up_len: (private) Used by the internal configuration code
  * @wext: (private) Used by the internal wireless extensions compat code
  * @use_4addr: indicates 4addr mode is used on this interface, must be
  *	set by driver (if supported) on add_interface BEFORE registering the
@@ -1653,7 +1732,7 @@ struct wireless_dev {
 
 	/* currently used for IBSS and SME - might be rearranged later */
 	u8 ssid[IEEE80211_MAX_SSID_LEN];
-	u8 ssid_len;
+	u8 ssid_len, mesh_id_len, mesh_id_up_len;
 	enum {
 		CFG80211_SME_IDLE,
 		CFG80211_SME_CONNECTING,
@@ -2297,6 +2376,32 @@ void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
 	size_t len);
 
 /**
+ * cfg80211_send_unprot_deauth - notification of unprotected deauthentication
+ * @dev: network device
+ * @buf: deauthentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever a received Deauthentication frame has been
+ * dropped in station mode because of MFP being used but the Deauthentication
+ * frame was not protected. This function may sleep.
+ */
+void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf,
+				 size_t len);
+
+/**
+ * cfg80211_send_unprot_disassoc - notification of unprotected disassociation
+ * @dev: network device
+ * @buf: disassociation frame (header + body)
+ * @len: length of the frame data
+ *
+ * This function is called whenever a received Disassociation frame has been
+ * dropped in station mode because of MFP being used but the Disassociation
+ * frame was not protected. This function may sleep.
+ */
+void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf,
+				   size_t len);
+
+/**
  * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
  * @dev: network device
  * @addr: The source MAC address of the frame
@@ -2595,6 +2700,18 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev,
 			      enum nl80211_cqm_rssi_threshold_event rssi_event,
 			      gfp_t gfp);
 
+/**
+ * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer
+ * @dev: network device
+ * @peer: peer's MAC address
+ * @num_packets: how many packets were lost -- should be a fixed threshold
+ *	but probably no less than maybe 50, or maybe a throughput dependent
+ *	threshold (to account for temporary interference)
+ * @gfp: context flags
+ */
+void cfg80211_cqm_pktloss_notify(struct net_device *dev,
+				 const u8 *peer, u32 num_packets, gfp_t gfp);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */
diff --git a/include/net/dcbevent.h b/include/net/dcbevent.h
new file mode 100644
index 00000000000..bc1e7ef4017
--- /dev/null
+++ b/include/net/dcbevent.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (c) 2010, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Author: John Fastabend <john.r.fastabend@intel.com>
+ */
+
+#ifndef _DCB_EVENT_H
+#define _DCB_EVENT_H
+
+enum dcbevent_notif_type {
+	DCB_APP_EVENT = 1,
+};
+
+extern int register_dcbevent_notifier(struct notifier_block *nb);
+extern int unregister_dcbevent_notifier(struct notifier_block *nb);
+extern int call_dcbevent_notifiers(unsigned long val, void *v);
+
+#endif
diff --git a/include/net/dcbnl.h b/include/net/dcbnl.h
index b36ac7e0914..a8e7852b10a 100644
--- a/include/net/dcbnl.h
+++ b/include/net/dcbnl.h
@@ -20,11 +20,31 @@
 #ifndef __NET_DCBNL_H__
 #define __NET_DCBNL_H__
 
+#include <linux/dcbnl.h>
+
+struct dcb_app_type {
+	char		  name[IFNAMSIZ];
+	struct dcb_app	  app;
+	struct list_head  list;
+};
+
+u8 dcb_setapp(struct net_device *, struct dcb_app *);
+u8 dcb_getapp(struct net_device *, struct dcb_app *);
+
 /*
  * Ops struct for the netlink callbacks.  Used by DCB-enabled drivers through
  * the netdevice struct.
  */
 struct dcbnl_rtnl_ops {
+	/* IEEE 802.1Qaz std */
+	int (*ieee_getets) (struct net_device *, struct ieee_ets *);
+	int (*ieee_setets) (struct net_device *, struct ieee_ets *);
+	int (*ieee_getpfc) (struct net_device *, struct ieee_pfc *);
+	int (*ieee_setpfc) (struct net_device *, struct ieee_pfc *);
+	int (*ieee_getapp) (struct net_device *, struct dcb_app *);
+	int (*ieee_setapp) (struct net_device *, struct dcb_app *);
+
+	/* CEE std */
 	u8   (*getstate)(struct net_device *);
 	u8   (*setstate)(struct net_device *, u8);
 	void (*getpermhwaddr)(struct net_device *, u8 *);
@@ -50,6 +70,14 @@ struct dcbnl_rtnl_ops {
 	void (*setbcnrp)(struct net_device *, int, u8);
 	u8   (*setapp)(struct net_device *, u8, u16, u8);
 	u8   (*getapp)(struct net_device *, u8, u16);
+	u8   (*getfeatcfg)(struct net_device *, int, u8 *);
+	u8   (*setfeatcfg)(struct net_device *, int, u8);
+
+	/* DCBX configuration */
+	u8   (*getdcbx)(struct net_device *);
+	u8   (*setdcbx)(struct net_device *, u8);
+
+
 };
 
 #endif /* __NET_DCBNL_H__ */
diff --git a/include/net/dn.h b/include/net/dn.h
index e5469f7b67a..a514a3cf457 100644
--- a/include/net/dn.h
+++ b/include/net/dn.h
@@ -225,7 +225,7 @@ extern int decnet_di_count;
 extern int decnet_dr_count;
 extern int decnet_no_fc_max_cwnd;
 
-extern int sysctl_decnet_mem[3];
+extern long sysctl_decnet_mem[3];
 extern int sysctl_decnet_wmem[3];
 extern int sysctl_decnet_rmem[3];
 
diff --git a/include/net/dst.h b/include/net/dst.h
index 6baba836ad8..be5a0d4c491 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -70,7 +70,7 @@ struct dst_entry {
 
 	struct  dst_ops	        *ops;
 
-	u32			metrics[RTAX_MAX];
+	u32			_metrics[RTAX_MAX];
 
 #ifdef CONFIG_IP_ROUTE_CLASSID
 	__u32			tclassid;
@@ -104,9 +104,49 @@ struct dst_entry {
 #ifdef __KERNEL__
 
 static inline u32
-dst_metric(const struct dst_entry *dst, int metric)
+dst_metric_raw(const struct dst_entry *dst, const int metric)
 {
-	return dst->metrics[metric-1];
+	return dst->_metrics[metric-1];
+}
+
+static inline u32
+dst_metric(const struct dst_entry *dst, const int metric)
+{
+	WARN_ON_ONCE(metric == RTAX_HOPLIMIT ||
+		     metric == RTAX_ADVMSS ||
+		     metric == RTAX_MTU);
+	return dst_metric_raw(dst, metric);
+}
+
+static inline u32
+dst_metric_advmss(const struct dst_entry *dst)
+{
+	u32 advmss = dst_metric_raw(dst, RTAX_ADVMSS);
+
+	if (!advmss)
+		advmss = dst->ops->default_advmss(dst);
+
+	return advmss;
+}
+
+static inline void dst_metric_set(struct dst_entry *dst, int metric, u32 val)
+{
+	dst->_metrics[metric-1] = val;
+}
+
+static inline void dst_import_metrics(struct dst_entry *dst, const u32 *src_metrics)
+{
+	memcpy(dst->_metrics, src_metrics, RTAX_MAX * sizeof(u32));
+}
+
+static inline void dst_copy_metrics(struct dst_entry *dest, const struct dst_entry *src)
+{
+	dst_import_metrics(dest, src->_metrics);
+}
+
+static inline u32 *dst_metrics_ptr(struct dst_entry *dst)
+{
+	return dst->_metrics;
 }
 
 static inline u32
@@ -117,11 +157,11 @@ dst_feature(const struct dst_entry *dst, u32 feature)
 
 static inline u32 dst_mtu(const struct dst_entry *dst)
 {
-	u32 mtu = dst_metric(dst, RTAX_MTU);
-	/*
-	 * Alexey put it here, so ask him about it :)
-	 */
-	barrier();
+	u32 mtu = dst_metric_raw(dst, RTAX_MTU);
+
+	if (!mtu)
+		mtu = dst->ops->default_mtu(dst);
+
 	return mtu;
 }
 
@@ -134,7 +174,7 @@ static inline unsigned long dst_metric_rtt(const struct dst_entry *dst, int metr
 static inline void set_dst_metric_rtt(struct dst_entry *dst, int metric,
 				      unsigned long rtt)
 {
-	dst->metrics[metric-1] = jiffies_to_msecs(rtt);
+	dst_metric_set(dst, metric, jiffies_to_msecs(rtt));
 }
 
 static inline u32
@@ -147,7 +187,7 @@ dst_allfrag(const struct dst_entry *dst)
 }
 
 static inline int
-dst_metric_locked(struct dst_entry *dst, int metric)
+dst_metric_locked(const struct dst_entry *dst, int metric)
 {
 	return dst_metric(dst, RTAX_LOCK) & (1<<metric);
 }
diff --git a/include/net/dst_ops.h b/include/net/dst_ops.h
index 51665b3461b..21a320b8708 100644
--- a/include/net/dst_ops.h
+++ b/include/net/dst_ops.h
@@ -16,6 +16,8 @@ struct dst_ops {
 
 	int			(*gc)(struct dst_ops *ops);
 	struct dst_entry *	(*check)(struct dst_entry *, __u32 cookie);
+	unsigned int		(*default_advmss)(const struct dst_entry *);
+	unsigned int		(*default_mtu)(const struct dst_entry *);
 	void			(*destroy)(struct dst_entry *);
 	void			(*ifdown)(struct dst_entry *,
 					  struct net_device *dev, int how);
diff --git a/include/net/flow.h b/include/net/flow.h
index 0ac3fb5e097..240b7f356c7 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -49,7 +49,6 @@ struct flowi {
 	__u8	proto;
 	__u8	flags;
 #define FLOWI_FLAG_ANYSRC 0x01
-#define FLOWI_FLAG_MATCH_ANY_IIF 0x02
 	union {
 		struct {
 			__be16	sport;
@@ -67,6 +66,7 @@ struct flowi {
 		} dnports;
 
 		__be32		spi;
+		__be32		gre_key;
 
 		struct {
 			__u8	type;
@@ -78,6 +78,7 @@ struct flowi {
 #define fl_icmp_code	uli_u.icmpt.code
 #define fl_ipsec_spi	uli_u.spi
 #define fl_mh_type	uli_u.mht.type
+#define fl_gre_key	uli_u.gre_key
 	__u32           secid;	/* used by xfrm; see secid.txt */
 } __attribute__((__aligned__(BITS_PER_LONG/8)));
 
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index f95ff8d9aa4..04977eefb0e 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -89,10 +89,11 @@ struct ip6_sf_socklist {
 struct ipv6_mc_socklist {
 	struct in6_addr		addr;
 	int			ifindex;
-	struct ipv6_mc_socklist *next;
+	struct ipv6_mc_socklist __rcu *next;
 	rwlock_t		sflock;
 	unsigned int		sfmode;		/* MCAST_{INCLUDE,EXCLUDE} */
 	struct ip6_sf_socklist	*sflist;
+	struct rcu_head		rcu;
 };
 
 struct ip6_sf_list {
diff --git a/include/net/inet6_connection_sock.h b/include/net/inet6_connection_sock.h
index aae08f68663..ff013505236 100644
--- a/include/net/inet6_connection_sock.h
+++ b/include/net/inet6_connection_sock.h
@@ -25,6 +25,9 @@ struct sockaddr;
 extern int inet6_csk_bind_conflict(const struct sock *sk,
 				   const struct inet_bind_bucket *tb);
 
+extern struct dst_entry* inet6_csk_route_req(struct sock *sk,
+					     const struct request_sock *req);
+
 extern struct request_sock *inet6_csk_search_req(const struct sock *sk,
 						 struct request_sock ***prevp,
 						 const __be16 rport,
diff --git a/include/net/inet_connection_sock.h b/include/net/inet_connection_sock.h
index e4f494b42e0..6ac4e3b5007 100644
--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -43,7 +43,7 @@ struct inet_connection_sock_af_ops {
 	struct sock *(*syn_recv_sock)(struct sock *sk, struct sk_buff *skb,
 				      struct request_sock *req,
 				      struct dst_entry *dst);
-	int	    (*remember_stamp)(struct sock *sk);
+	struct inet_peer *(*get_peer)(struct sock *sk, bool *release_it);
 	u16	    net_header_len;
 	u16	    sockaddr_len;
 	int	    (*setsockopt)(struct sock *sk, int level, int optname, 
@@ -132,7 +132,6 @@ struct inet_connection_sock {
 #define ICSK_TIME_RETRANS	1	/* Retransmit timer */
 #define ICSK_TIME_DACK		2	/* Delayed ack timer */
 #define ICSK_TIME_PROBE0	3	/* Zero window probe timer */
-#define ICSK_TIME_KEEPOPEN	4	/* Keepalive timer */
 
 static inline struct inet_connection_sock *inet_csk(const struct sock *sk)
 {
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index 1989cfd7405..8181498fa96 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -116,8 +116,9 @@ struct inet_sock {
 	struct ipv6_pinfo	*pinet6;
 #endif
 	/* Socket demultiplex comparisons on incoming packets. */
-	__be32			inet_daddr;
-	__be32			inet_rcv_saddr;
+#define inet_daddr		sk.__sk_common.skc_daddr
+#define inet_rcv_saddr		sk.__sk_common.skc_rcv_saddr
+
 	__be16			inet_dport;
 	__u16			inet_num;
 	__be32			inet_saddr;
@@ -141,7 +142,7 @@ struct inet_sock {
 				nodefrag:1;
 	int			mc_index;
 	__be32			mc_addr;
-	struct ip_mc_socklist	*mc_list;
+	struct ip_mc_socklist __rcu	*mc_list;
 	struct {
 		unsigned int		flags;
 		unsigned int		fragsize;
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index a066fdd50da..17404b5388a 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -88,12 +88,6 @@ extern void inet_twdr_hangman(unsigned long data);
 extern void inet_twdr_twkill_work(struct work_struct *work);
 extern void inet_twdr_twcal_tick(unsigned long data);
 
-#if (BITS_PER_LONG == 64)
-#define INET_TIMEWAIT_ADDRCMP_ALIGN_BYTES 8
-#else
-#define INET_TIMEWAIT_ADDRCMP_ALIGN_BYTES 4
-#endif
-
 struct inet_bind_bucket;
 
 /*
@@ -117,15 +111,15 @@ struct inet_timewait_sock {
 #define tw_hash			__tw_common.skc_hash
 #define tw_prot			__tw_common.skc_prot
 #define tw_net			__tw_common.skc_net
+#define tw_daddr        	__tw_common.skc_daddr
+#define tw_rcv_saddr    	__tw_common.skc_rcv_saddr
 	int			tw_timeout;
 	volatile unsigned char	tw_substate;
-	/* 3 bits hole, try to pack */
 	unsigned char		tw_rcv_wscale;
+
 	/* Socket demultiplex comparisons on incoming packets. */
-	/* these five are in inet_sock */
+	/* these three are in inet_sock */
 	__be16			tw_sport;
-	__be32			tw_daddr __attribute__((aligned(INET_TIMEWAIT_ADDRCMP_ALIGN_BYTES)));
-	__be32			tw_rcv_saddr;
 	__be16			tw_dport;
 	__u16			tw_num;
 	kmemcheck_bitfield_begin(flags);
@@ -191,10 +185,10 @@ static inline struct inet_timewait_sock *inet_twsk(const struct sock *sk)
 	return (struct inet_timewait_sock *)sk;
 }
 
-static inline __be32 inet_rcv_saddr(const struct sock *sk)
+static inline __be32 sk_rcv_saddr(const struct sock *sk)
 {
-	return likely(sk->sk_state != TCP_TIME_WAIT) ?
-		inet_sk(sk)->inet_rcv_saddr : inet_twsk(sk)->tw_rcv_saddr;
+/* both inet_sk() and inet_twsk() store rcv_saddr in skc_rcv_saddr */
+	return sk->__sk_common.skc_rcv_saddr;
 }
 
 extern void inet_twsk_put(struct inet_timewait_sock *tw);
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index fe239bfe5f7..599d96e7411 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -11,12 +11,21 @@
 #include <linux/init.h>
 #include <linux/jiffies.h>
 #include <linux/spinlock.h>
+#include <net/ipv6.h>
 #include <asm/atomic.h>
 
+struct inetpeer_addr {
+	union {
+		__be32		a4;
+		__be32		a6[4];
+	};
+	__u16	family;
+};
+
 struct inet_peer {
 	/* group together avl_left,avl_right,v4daddr to speedup lookups */
 	struct inet_peer __rcu	*avl_left, *avl_right;
-	__be32			v4daddr;	/* peer's address */
+	struct inetpeer_addr	daddr;
 	__u32			avl_height;
 	struct list_head	unused;
 	__u32			dtime;		/* the time of last use of not
@@ -26,7 +35,6 @@ struct inet_peer {
 	 * Once inet_peer is queued for deletion (refcnt == -1), following fields
 	 * are not available: rid, ip_id_count, tcp_ts, tcp_ts_stamp
 	 * We can share memory with rcu_head to keep inet_peer small
-	 * (less then 64 bytes)
 	 */
 	union {
 		struct {
@@ -42,7 +50,25 @@ struct inet_peer {
 void			inet_initpeers(void) __init;
 
 /* can be called with or without local BH being disabled */
-struct inet_peer	*inet_getpeer(__be32 daddr, int create);
+struct inet_peer	*inet_getpeer(struct inetpeer_addr *daddr, int create);
+
+static inline struct inet_peer *inet_getpeer_v4(__be32 v4daddr, int create)
+{
+	struct inetpeer_addr daddr;
+
+	daddr.a4 = v4daddr;
+	daddr.family = AF_INET;
+	return inet_getpeer(&daddr, create);
+}
+
+static inline struct inet_peer *inet_getpeer_v6(struct in6_addr *v6daddr, int create)
+{
+	struct inetpeer_addr daddr;
+
+	ipv6_addr_copy((struct in6_addr *)daddr.a6, v6daddr);
+	daddr.family = AF_INET6;
+	return inet_getpeer(&daddr, create);
+}
 
 /* can be called from BH context or outside */
 extern void inet_putpeer(struct inet_peer *p);
diff --git a/include/net/ip.h b/include/net/ip.h
index 86e2b182a0c..67fac78a186 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -201,7 +201,6 @@ static inline int inet_is_reserved_local_port(int port)
 	return test_bit(port, sysctl_local_reserved_ports);
 }
 
-extern int sysctl_ip_default_ttl;
 extern int sysctl_ip_nonlocal_bind;
 
 extern struct ctl_path net_core_path[];
@@ -428,15 +427,6 @@ extern void	ip_icmp_error(struct sock *sk, struct sk_buff *skb, int err,
 extern void	ip_local_error(struct sock *sk, int err, __be32 daddr, __be16 dport,
 			       u32 info);
 
-/* sysctl helpers - any sysctl which holds a value that ends up being
- * fed into the routing cache should use these handlers.
- */
-int ipv4_doint_and_flush(ctl_table *ctl, int write,
-			 void __user *buffer,
-			 size_t *lenp, loff_t *ppos);
-int ipv4_doint_and_flush_strategy(ctl_table *table,
-				  void __user *oldval, size_t __user *oldlenp,
-				  void __user *newval, size_t newlen);
 #ifdef CONFIG_PROC_FS
 extern int ip_misc_proc_init(void);
 #endif
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 062a823d311..708ff7cb880 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -21,6 +21,7 @@
 #include <net/dst.h>
 #include <net/flow.h>
 #include <net/netlink.h>
+#include <net/inetpeer.h>
 
 #ifdef CONFIG_IPV6_MULTIPLE_TABLES
 #define FIB6_TABLE_HASHSZ 256
@@ -109,6 +110,7 @@ struct rt6_info {
 	u32				rt6i_metric;
 
 	struct inet6_dev		*rt6i_idev;
+	struct inet_peer		*rt6i_peer;
 
 #ifdef CONFIG_XFRM
 	u32				rt6i_flow_cache_genid;
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 278312c95f9..8552f0a2e85 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -3,7 +3,6 @@
 
 #define IP6_RT_PRIO_USER	1024
 #define IP6_RT_PRIO_ADDRCONF	256
-#define IP6_RT_PRIO_KERN	512
 
 struct route_info {
 	__u8			type;
@@ -56,6 +55,18 @@ static inline unsigned int rt6_flags2srcprefs(int flags)
 	return (flags >> 3) & 7;
 }
 
+extern void			rt6_bind_peer(struct rt6_info *rt,
+					      int create);
+
+static inline struct inet_peer *rt6_get_peer(struct rt6_info *rt)
+{
+	if (rt->rt6i_peer)
+		return rt->rt6i_peer;
+
+	rt6_bind_peer(rt, 0);
+	return rt->rt6i_peer;
+}
+
 extern void			ip6_route_input(struct sk_buff *skb);
 
 extern struct dst_entry *	ip6_route_output(struct net *net,
@@ -164,5 +175,15 @@ static inline int ipv6_unicast_destination(struct sk_buff *skb)
 	return rt->rt6i_flags & RTF_LOCAL;
 }
 
+int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *));
+
+static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
+{
+	struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
+
+	return (np && np->pmtudisc == IPV6_PMTUDISC_PROBE) ?
+	       skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
+}
+
 #endif
 #endif
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index d858264217b..b23bea62f70 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -28,6 +28,80 @@
 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
 #include <net/netfilter/nf_conntrack.h>
 #endif
+#include <net/net_namespace.h>		/* Netw namespace */
+
+/*
+ * Generic access of ipvs struct
+ */
+static inline struct netns_ipvs *net_ipvs(struct net* net)
+{
+	return net->ipvs;
+}
+/*
+ * Get net ptr from skb in traffic cases
+ * use skb_sknet when call is from userland (ioctl or netlink)
+ */
+static inline struct net *skb_net(const struct sk_buff *skb)
+{
+#ifdef CONFIG_NET_NS
+#ifdef CONFIG_IP_VS_DEBUG
+	/*
+	 * This is used for debug only.
+	 * Start with the most likely hit
+	 * End with BUG
+	 */
+	if (likely(skb->dev && skb->dev->nd_net))
+		return dev_net(skb->dev);
+	if (skb_dst(skb)->dev)
+		return dev_net(skb_dst(skb)->dev);
+	WARN(skb->sk, "Maybe skb_sknet should be used in %s() at line:%d\n",
+		      __func__, __LINE__);
+	if (likely(skb->sk && skb->sk->sk_net))
+		return sock_net(skb->sk);
+	pr_err("There is no net ptr to find in the skb in %s() line:%d\n",
+		__func__, __LINE__);
+	BUG();
+#else
+	return dev_net(skb->dev ? : skb_dst(skb)->dev);
+#endif
+#else
+	return &init_net;
+#endif
+}
+
+static inline struct net *skb_sknet(const struct sk_buff *skb)
+{
+#ifdef CONFIG_NET_NS
+#ifdef CONFIG_IP_VS_DEBUG
+	/* Start with the most likely hit */
+	if (likely(skb->sk && skb->sk->sk_net))
+		return sock_net(skb->sk);
+	WARN(skb->dev, "Maybe skb_net should be used instead in %s() line:%d\n",
+		       __func__, __LINE__);
+	if (likely(skb->dev && skb->dev->nd_net))
+		return dev_net(skb->dev);
+	pr_err("There is no net ptr to find in the skb in %s() line:%d\n",
+		__func__, __LINE__);
+	BUG();
+#else
+	return sock_net(skb->sk);
+#endif
+#else
+	return &init_net;
+#endif
+}
+/*
+ * This one needed for single_open_net since net is stored directly in
+ * private not as a struct i.e. seq_file_net cant be used.
+ */
+static inline struct net *seq_file_single_net(struct seq_file *seq)
+{
+#ifdef CONFIG_NET_NS
+	return (struct net *)seq->private;
+#else
+	return &init_net;
+#endif
+}
 
 /* Connections' size value needed by ip_vs_ctl.c */
 extern int ip_vs_conn_tab_size;
@@ -258,6 +332,23 @@ struct ip_vs_seq {
 						   before last resized pkt */
 };
 
+/*
+ * counters per cpu
+ */
+struct ip_vs_counters {
+	__u32		conns;		/* connections scheduled */
+	__u32		inpkts;		/* incoming packets */
+	__u32		outpkts;	/* outgoing packets */
+	__u64		inbytes;	/* incoming bytes */
+	__u64		outbytes;	/* outgoing bytes */
+};
+/*
+ * Stats per cpu
+ */
+struct ip_vs_cpu_stats {
+	struct ip_vs_counters   ustats;
+	struct u64_stats_sync   syncp;
+};
 
 /*
  *	IPVS statistics objects
@@ -279,17 +370,34 @@ struct ip_vs_estimator {
 };
 
 struct ip_vs_stats {
-	struct ip_vs_stats_user	ustats;         /* statistics */
+	struct ip_vs_stats_user	ustats;		/* statistics */
 	struct ip_vs_estimator	est;		/* estimator */
-
-	spinlock_t              lock;           /* spin lock */
+	struct ip_vs_cpu_stats	*cpustats;	/* per cpu counters */
+	spinlock_t		lock;		/* spin lock */
 };
 
+/*
+ * Helper Macros for per cpu
+ * ipvs->tot_stats->ustats.count
+ */
+#define IPVS_STAT_INC(ipvs, count)	\
+	__this_cpu_inc((ipvs)->ustats->count)
+
+#define IPVS_STAT_ADD(ipvs, count, value) \
+	do {\
+		write_seqcount_begin(per_cpu_ptr((ipvs)->ustats_seq, \
+				     raw_smp_processor_id())); \
+		__this_cpu_add((ipvs)->ustats->count, value); \
+		write_seqcount_end(per_cpu_ptr((ipvs)->ustats_seq, \
+				   raw_smp_processor_id())); \
+	} while (0)
+
 struct dst_entry;
 struct iphdr;
 struct ip_vs_conn;
 struct ip_vs_app;
 struct sk_buff;
+struct ip_vs_proto_data;
 
 struct ip_vs_protocol {
 	struct ip_vs_protocol	*next;
@@ -297,21 +405,22 @@ struct ip_vs_protocol {
 	u16			protocol;
 	u16			num_states;
 	int			dont_defrag;
-	atomic_t		appcnt;		/* counter of proto app incs */
-	int			*timeout_table;	/* protocol timeout table */
 
 	void (*init)(struct ip_vs_protocol *pp);
 
 	void (*exit)(struct ip_vs_protocol *pp);
 
+	void (*init_netns)(struct net *net, struct ip_vs_proto_data *pd);
+
+	void (*exit_netns)(struct net *net, struct ip_vs_proto_data *pd);
+
 	int (*conn_schedule)(int af, struct sk_buff *skb,
-			     struct ip_vs_protocol *pp,
+			     struct ip_vs_proto_data *pd,
 			     int *verdict, struct ip_vs_conn **cpp);
 
 	struct ip_vs_conn *
 	(*conn_in_get)(int af,
 		       const struct sk_buff *skb,
-		       struct ip_vs_protocol *pp,
 		       const struct ip_vs_iphdr *iph,
 		       unsigned int proto_off,
 		       int inverse);
@@ -319,7 +428,6 @@ struct ip_vs_protocol {
 	struct ip_vs_conn *
 	(*conn_out_get)(int af,
 			const struct sk_buff *skb,
-			struct ip_vs_protocol *pp,
 			const struct ip_vs_iphdr *iph,
 			unsigned int proto_off,
 			int inverse);
@@ -337,11 +445,11 @@ struct ip_vs_protocol {
 
 	int (*state_transition)(struct ip_vs_conn *cp, int direction,
 				const struct sk_buff *skb,
-				struct ip_vs_protocol *pp);
+				struct ip_vs_proto_data *pd);
 
-	int (*register_app)(struct ip_vs_app *inc);
+	int (*register_app)(struct net *net, struct ip_vs_app *inc);
 
-	void (*unregister_app)(struct ip_vs_app *inc);
+	void (*unregister_app)(struct net *net, struct ip_vs_app *inc);
 
 	int (*app_conn_bind)(struct ip_vs_conn *cp);
 
@@ -350,14 +458,26 @@ struct ip_vs_protocol {
 			     int offset,
 			     const char *msg);
 
-	void (*timeout_change)(struct ip_vs_protocol *pp, int flags);
+	void (*timeout_change)(struct ip_vs_proto_data *pd, int flags);
+};
 
-	int (*set_state_timeout)(struct ip_vs_protocol *pp, char *sname, int to);
+/*
+ * protocol data per netns
+ */
+struct ip_vs_proto_data {
+	struct ip_vs_proto_data	*next;
+	struct ip_vs_protocol	*pp;
+	int			*timeout_table;	/* protocol timeout table */
+	atomic_t		appcnt;		/* counter of proto app incs. */
+	struct tcp_states_t	*tcp_state_table;
 };
 
-extern struct ip_vs_protocol * ip_vs_proto_get(unsigned short proto);
+extern struct ip_vs_protocol   *ip_vs_proto_get(unsigned short proto);
+extern struct ip_vs_proto_data *ip_vs_proto_data_get(struct net *net,
+						     unsigned short proto);
 
 struct ip_vs_conn_param {
+	struct net			*net;
 	const union nf_inet_addr	*caddr;
 	const union nf_inet_addr	*vaddr;
 	__be16				cport;
@@ -375,17 +495,19 @@ struct ip_vs_conn_param {
  */
 struct ip_vs_conn {
 	struct list_head        c_list;         /* hashed list heads */
-
+#ifdef CONFIG_NET_NS
+	struct net              *net;           /* Name space */
+#endif
 	/* Protocol, addresses and port numbers */
-	u16                      af;		/* address family */
-	union nf_inet_addr       caddr;          /* client address */
-	union nf_inet_addr       vaddr;          /* virtual address */
-	union nf_inet_addr       daddr;          /* destination address */
-	volatile __u32           flags;          /* status flags */
-	__u32                    fwmark;         /* Fire wall mark from skb */
-	__be16                   cport;
-	__be16                   vport;
-	__be16                   dport;
+	u16                     af;             /* address family */
+	__be16                  cport;
+	__be16                  vport;
+	__be16                  dport;
+	__u32                   fwmark;         /* Fire wall mark from skb */
+	union nf_inet_addr      caddr;          /* client address */
+	union nf_inet_addr      vaddr;          /* virtual address */
+	union nf_inet_addr      daddr;          /* destination address */
+	volatile __u32          flags;          /* status flags */
 	__u16                   protocol;       /* Which protocol (TCP/UDP) */
 
 	/* counter and timer */
@@ -428,6 +550,33 @@ struct ip_vs_conn {
 	__u8			pe_data_len;
 };
 
+/*
+ *  To save some memory in conn table when name space is disabled.
+ */
+static inline struct net *ip_vs_conn_net(const struct ip_vs_conn *cp)
+{
+#ifdef CONFIG_NET_NS
+	return cp->net;
+#else
+	return &init_net;
+#endif
+}
+static inline void ip_vs_conn_net_set(struct ip_vs_conn *cp, struct net *net)
+{
+#ifdef CONFIG_NET_NS
+	cp->net = net;
+#endif
+}
+
+static inline int ip_vs_conn_net_eq(const struct ip_vs_conn *cp,
+				    struct net *net)
+{
+#ifdef CONFIG_NET_NS
+	return cp->net == net;
+#else
+	return 1;
+#endif
+}
 
 /*
  *	Extended internal versions of struct ip_vs_service_user and
@@ -487,6 +636,7 @@ struct ip_vs_service {
 	unsigned		flags;	  /* service status flags */
 	unsigned		timeout;  /* persistent timeout in ticks */
 	__be32			netmask;  /* grouping granularity */
+	struct net		*net;
 
 	struct list_head	destinations;  /* real server d-linked list */
 	__u32			num_dests;     /* number of servers */
@@ -512,8 +662,8 @@ struct ip_vs_dest {
 	struct list_head	d_list;   /* for table with all the dests */
 
 	u16			af;		/* address family */
-	union nf_inet_addr	addr;		/* IP address of the server */
 	__be16			port;		/* port number of the server */
+	union nf_inet_addr	addr;		/* IP address of the server */
 	volatile unsigned	flags;		/* dest status flags */
 	atomic_t		conn_flags;	/* flags to copy to conn */
 	atomic_t		weight;		/* server weight */
@@ -540,8 +690,8 @@ struct ip_vs_dest {
 	/* for virtual service */
 	struct ip_vs_service	*svc;		/* service it belongs to */
 	__u16			protocol;	/* which protocol (TCP/UDP) */
-	union nf_inet_addr	vaddr;		/* virtual IP address */
 	__be16			vport;		/* virtual port number */
+	union nf_inet_addr	vaddr;		/* virtual IP address */
 	__u32			vfwmark;	/* firewall mark of service */
 };
 
@@ -676,13 +826,14 @@ enum {
 	IP_VS_DIR_LAST,
 };
 
-static inline void ip_vs_conn_fill_param(int af, int protocol,
+static inline void ip_vs_conn_fill_param(struct net *net, int af, int protocol,
 					 const union nf_inet_addr *caddr,
 					 __be16 cport,
 					 const union nf_inet_addr *vaddr,
 					 __be16 vport,
 					 struct ip_vs_conn_param *p)
 {
+	p->net = net;
 	p->af = af;
 	p->protocol = protocol;
 	p->caddr = caddr;
@@ -697,7 +848,6 @@ struct ip_vs_conn *ip_vs_conn_in_get(const struct ip_vs_conn_param *p);
 struct ip_vs_conn *ip_vs_ct_in_get(const struct ip_vs_conn_param *p);
 
 struct ip_vs_conn * ip_vs_conn_in_get_proto(int af, const struct sk_buff *skb,
-					    struct ip_vs_protocol *pp,
 					    const struct ip_vs_iphdr *iph,
 					    unsigned int proto_off,
 					    int inverse);
@@ -705,7 +855,6 @@ struct ip_vs_conn * ip_vs_conn_in_get_proto(int af, const struct sk_buff *skb,
 struct ip_vs_conn *ip_vs_conn_out_get(const struct ip_vs_conn_param *p);
 
 struct ip_vs_conn * ip_vs_conn_out_get_proto(int af, const struct sk_buff *skb,
-					     struct ip_vs_protocol *pp,
 					     const struct ip_vs_iphdr *iph,
 					     unsigned int proto_off,
 					     int inverse);
@@ -726,9 +875,9 @@ extern void ip_vs_conn_expire_now(struct ip_vs_conn *cp);
 
 extern const char * ip_vs_state_name(__u16 proto, int state);
 
-extern void ip_vs_tcp_conn_listen(struct ip_vs_conn *cp);
+extern void ip_vs_tcp_conn_listen(struct net *net, struct ip_vs_conn *cp);
 extern int ip_vs_check_template(struct ip_vs_conn *ct);
-extern void ip_vs_random_dropentry(void);
+extern void ip_vs_random_dropentry(struct net *net);
 extern int ip_vs_conn_init(void);
 extern void ip_vs_conn_cleanup(void);
 
@@ -798,12 +947,12 @@ ip_vs_control_add(struct ip_vs_conn *cp, struct ip_vs_conn *ctl_cp)
  *      (from ip_vs_app.c)
  */
 #define IP_VS_APP_MAX_PORTS  8
-extern int register_ip_vs_app(struct ip_vs_app *app);
-extern void unregister_ip_vs_app(struct ip_vs_app *app);
+extern int register_ip_vs_app(struct net *net, struct ip_vs_app *app);
+extern void unregister_ip_vs_app(struct net *net, struct ip_vs_app *app);
 extern int ip_vs_bind_app(struct ip_vs_conn *cp, struct ip_vs_protocol *pp);
 extern void ip_vs_unbind_app(struct ip_vs_conn *cp);
-extern int
-register_ip_vs_app_inc(struct ip_vs_app *app, __u16 proto, __u16 port);
+extern int register_ip_vs_app_inc(struct net *net, struct ip_vs_app *app,
+				  __u16 proto, __u16 port);
 extern int ip_vs_app_inc_get(struct ip_vs_app *inc);
 extern void ip_vs_app_inc_put(struct ip_vs_app *inc);
 
@@ -836,7 +985,7 @@ static inline void ip_vs_pe_put(const struct ip_vs_pe *pe)
  */
 extern int ip_vs_protocol_init(void);
 extern void ip_vs_protocol_cleanup(void);
-extern void ip_vs_protocol_timeout_change(int flags);
+extern void ip_vs_protocol_timeout_change(struct netns_ipvs *ipvs, int flags);
 extern int *ip_vs_create_timeout_table(int *table, int size);
 extern int
 ip_vs_set_state_timeout(int *table, int num, const char *const *names,
@@ -866,28 +1015,21 @@ extern struct ip_vs_scheduler *ip_vs_scheduler_get(const char *sched_name);
 extern void ip_vs_scheduler_put(struct ip_vs_scheduler *scheduler);
 extern struct ip_vs_conn *
 ip_vs_schedule(struct ip_vs_service *svc, struct sk_buff *skb,
-	       struct ip_vs_protocol *pp, int *ignored);
+	       struct ip_vs_proto_data *pd, int *ignored);
 extern int ip_vs_leave(struct ip_vs_service *svc, struct sk_buff *skb,
-			struct ip_vs_protocol *pp);
+			struct ip_vs_proto_data *pd);
 
 
 /*
  *      IPVS control data and functions (from ip_vs_ctl.c)
  */
-extern int sysctl_ip_vs_cache_bypass;
-extern int sysctl_ip_vs_expire_nodest_conn;
-extern int sysctl_ip_vs_expire_quiescent_template;
-extern int sysctl_ip_vs_sync_threshold[2];
-extern int sysctl_ip_vs_nat_icmp_send;
-extern int sysctl_ip_vs_conntrack;
-extern int sysctl_ip_vs_snat_reroute;
 extern struct ip_vs_stats ip_vs_stats;
 extern const struct ctl_path net_vs_ctl_path[];
 extern int sysctl_ip_vs_sync_ver;
 
-extern void ip_vs_sync_switch_mode(int mode);
+extern void ip_vs_sync_switch_mode(struct net *net, int mode);
 extern struct ip_vs_service *
-ip_vs_service_get(int af, __u32 fwmark, __u16 protocol,
+ip_vs_service_get(struct net *net, int af, __u32 fwmark, __u16 protocol,
 		  const union nf_inet_addr *vaddr, __be16 vport);
 
 static inline void ip_vs_service_put(struct ip_vs_service *svc)
@@ -896,7 +1038,7 @@ static inline void ip_vs_service_put(struct ip_vs_service *svc)
 }
 
 extern struct ip_vs_dest *
-ip_vs_lookup_real_service(int af, __u16 protocol,
+ip_vs_lookup_real_service(struct net *net, int af, __u16 protocol,
 			  const union nf_inet_addr *daddr, __be16 dport);
 
 extern int ip_vs_use_count_inc(void);
@@ -904,9 +1046,9 @@ extern void ip_vs_use_count_dec(void);
 extern int ip_vs_control_init(void);
 extern void ip_vs_control_cleanup(void);
 extern struct ip_vs_dest *
-ip_vs_find_dest(int af, const union nf_inet_addr *daddr, __be16 dport,
-		const union nf_inet_addr *vaddr, __be16 vport, __u16 protocol,
-		__u32 fwmark);
+ip_vs_find_dest(struct net *net, int af, const union nf_inet_addr *daddr,
+		__be16 dport, const union nf_inet_addr *vaddr, __be16 vport,
+		__u16 protocol, __u32 fwmark);
 extern struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp);
 
 
@@ -914,14 +1056,12 @@ extern struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp);
  *      IPVS sync daemon data and function prototypes
  *      (from ip_vs_sync.c)
  */
-extern volatile int ip_vs_sync_state;
-extern volatile int ip_vs_master_syncid;
-extern volatile int ip_vs_backup_syncid;
-extern char ip_vs_master_mcast_ifn[IP_VS_IFNAME_MAXLEN];
-extern char ip_vs_backup_mcast_ifn[IP_VS_IFNAME_MAXLEN];
-extern int start_sync_thread(int state, char *mcast_ifn, __u8 syncid);
-extern int stop_sync_thread(int state);
-extern void ip_vs_sync_conn(struct ip_vs_conn *cp);
+extern int start_sync_thread(struct net *net, int state, char *mcast_ifn,
+			     __u8 syncid);
+extern int stop_sync_thread(struct net *net, int state);
+extern void ip_vs_sync_conn(struct net *net, struct ip_vs_conn *cp);
+extern int ip_vs_sync_init(void);
+extern void ip_vs_sync_cleanup(void);
 
 
 /*
@@ -929,8 +1069,8 @@ extern void ip_vs_sync_conn(struct ip_vs_conn *cp);
  */
 extern int ip_vs_estimator_init(void);
 extern void ip_vs_estimator_cleanup(void);
-extern void ip_vs_new_estimator(struct ip_vs_stats *stats);
-extern void ip_vs_kill_estimator(struct ip_vs_stats *stats);
+extern void ip_vs_new_estimator(struct net *net, struct ip_vs_stats *stats);
+extern void ip_vs_kill_estimator(struct net *net, struct ip_vs_stats *stats);
 extern void ip_vs_zero_estimator(struct ip_vs_stats *stats);
 
 /*
@@ -972,11 +1112,13 @@ extern int ip_vs_icmp_xmit_v6
 extern int ip_vs_drop_rate;
 extern int ip_vs_drop_counter;
 
-static __inline__ int ip_vs_todrop(void)
+static inline int ip_vs_todrop(struct netns_ipvs *ipvs)
 {
-	if (!ip_vs_drop_rate) return 0;
-	if (--ip_vs_drop_counter > 0) return 0;
-	ip_vs_drop_counter = ip_vs_drop_rate;
+	if (!ipvs->drop_rate)
+		return 0;
+	if (--ipvs->drop_counter > 0)
+		return 0;
+	ipvs->drop_counter = ipvs->drop_rate;
 	return 1;
 }
 
@@ -1064,9 +1206,9 @@ static inline void ip_vs_notrack(struct sk_buff *skb)
  *      Netfilter connection tracking
  *      (from ip_vs_nfct.c)
  */
-static inline int ip_vs_conntrack_enabled(void)
+static inline int ip_vs_conntrack_enabled(struct netns_ipvs *ipvs)
 {
-	return sysctl_ip_vs_conntrack;
+	return ipvs->sysctl_conntrack;
 }
 
 extern void ip_vs_update_conntrack(struct sk_buff *skb, struct ip_vs_conn *cp,
@@ -1079,7 +1221,7 @@ extern void ip_vs_conn_drop_conntrack(struct ip_vs_conn *cp);
 
 #else
 
-static inline int ip_vs_conntrack_enabled(void)
+static inline int ip_vs_conntrack_enabled(struct netns_ipvs *ipvs)
 {
 	return 0;
 }
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 9fdf982d128..5b3fd5add7a 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -97,6 +97,20 @@ enum ieee80211_max_queues {
 };
 
 /**
+ * enum ieee80211_ac_numbers - AC numbers as used in mac80211
+ * @IEEE80211_AC_VO: voice
+ * @IEEE80211_AC_VI: video
+ * @IEEE80211_AC_BE: best effort
+ * @IEEE80211_AC_BK: background
+ */
+enum ieee80211_ac_numbers {
+	IEEE80211_AC_VO		= 0,
+	IEEE80211_AC_VI		= 1,
+	IEEE80211_AC_BE		= 2,
+	IEEE80211_AC_BK		= 3,
+};
+
+/**
  * struct ieee80211_tx_queue_params - transmit queue configuration
  *
  * The information provided in this structure is required for QoS
@@ -205,6 +219,7 @@ enum ieee80211_bss_change {
  * @basic_rates: bitmap of basic rates, each bit stands for an
  *	index into the rate table configured by the driver in
  *	the current band.
+ * @mcast_rate: per-band multicast rate index + 1 (0: disabled)
  * @bssid: The BSSID for this BSS
  * @enable_beacon: whether beaconing should be enabled or not
  * @channel_type: Channel type for this BSS -- the hardware might be
@@ -244,6 +259,7 @@ struct ieee80211_bss_conf {
 	u16 assoc_capability;
 	u64 timestamp;
 	u32 basic_rates;
+	int mcast_rate[IEEE80211_NUM_BANDS];
 	u16 ht_operation_mode;
 	s32 cqm_rssi_thold;
 	u32 cqm_rssi_hyst;
@@ -349,6 +365,7 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_INTFL_NL80211_FRAME_TX	= BIT(21),
 	IEEE80211_TX_CTL_LDPC			= BIT(22),
 	IEEE80211_TX_CTL_STBC			= BIT(23) | BIT(24),
+	IEEE80211_TX_CTL_TX_OFFCHAN		= BIT(25),
 };
 
 #define IEEE80211_TX_CTL_STBC_SHIFT		23
@@ -1652,6 +1669,11 @@ enum ieee80211_ampdu_mlme_action {
  *	and IV16) for the given key from hardware.
  *	The callback must be atomic.
  *
+ * @set_frag_threshold: Configuration of fragmentation threshold. Assign this
+ *	if the device does fragmentation by itself; if this callback is
+ *	implemented then the stack will not do fragmentation.
+ *	The callback can sleep.
+ *
  * @set_rts_threshold: Configuration of RTS threshold (if device needs it)
  *	The callback can sleep.
  *
@@ -1724,6 +1746,13 @@ enum ieee80211_ampdu_mlme_action {
  *	completion of the channel switch.
  *
  * @napi_poll: Poll Rx queue for incoming data frames.
+ *
+ * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device.
+ *	Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may
+ *	reject TX/RX mask combinations they cannot support by returning -EINVAL
+ *	(also see nl80211.h @NL80211_ATTR_WIPHY_ANTENNA_TX).
+ *
+ * @get_antenna: Get current antenna configuration from device (tx_ant, rx_ant).
  */
 struct ieee80211_ops {
 	int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -1765,6 +1794,7 @@ struct ieee80211_ops {
 			 struct ieee80211_low_level_stats *stats);
 	void (*get_tkip_seq)(struct ieee80211_hw *hw, u8 hw_key_idx,
 			     u32 *iv32, u16 *iv16);
+	int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value);
 	int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value);
 	int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		       struct ieee80211_sta *sta);
@@ -1793,6 +1823,14 @@ struct ieee80211_ops {
 	void (*channel_switch)(struct ieee80211_hw *hw,
 			       struct ieee80211_channel_switch *ch_switch);
 	int (*napi_poll)(struct ieee80211_hw *hw, int budget);
+	int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
+	int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
+
+	int (*remain_on_channel)(struct ieee80211_hw *hw,
+				 struct ieee80211_channel *chan,
+				 enum nl80211_channel_type channel_type,
+				 int duration);
+	int (*cancel_remain_on_channel)(struct ieee80211_hw *hw);
 };
 
 /**
@@ -1821,11 +1859,39 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
  */
 int ieee80211_register_hw(struct ieee80211_hw *hw);
 
+/**
+ * struct ieee80211_tpt_blink - throughput blink description
+ * @throughput: throughput in Kbit/sec
+ * @blink_time: blink time in milliseconds
+ *	(full cycle, ie. one off + one on period)
+ */
+struct ieee80211_tpt_blink {
+	int throughput;
+	int blink_time;
+};
+
+/**
+ * enum ieee80211_tpt_led_trigger_flags - throughput trigger flags
+ * @IEEE80211_TPT_LEDTRIG_FL_RADIO: enable blinking with radio
+ * @IEEE80211_TPT_LEDTRIG_FL_WORK: enable blinking when working
+ * @IEEE80211_TPT_LEDTRIG_FL_CONNECTED: enable blinking when at least one
+ *	interface is connected in some way, including being an AP
+ */
+enum ieee80211_tpt_led_trigger_flags {
+	IEEE80211_TPT_LEDTRIG_FL_RADIO		= BIT(0),
+	IEEE80211_TPT_LEDTRIG_FL_WORK		= BIT(1),
+	IEEE80211_TPT_LEDTRIG_FL_CONNECTED	= BIT(2),
+};
+
 #ifdef CONFIG_MAC80211_LEDS
 extern char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw);
 extern char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw);
 extern char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw);
 extern char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw);
+extern char *__ieee80211_create_tpt_led_trigger(
+				struct ieee80211_hw *hw, unsigned int flags,
+				const struct ieee80211_tpt_blink *blink_table,
+				unsigned int blink_table_len);
 #endif
 /**
  * ieee80211_get_tx_led_name - get name of TX LED
@@ -1904,6 +1970,30 @@ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
 }
 
 /**
+ * ieee80211_create_tpt_led_trigger - create throughput LED trigger
+ * @hw: the hardware to create the trigger for
+ * @flags: trigger flags, see &enum ieee80211_tpt_led_trigger_flags
+ * @blink_table: the blink table -- needs to be ordered by throughput
+ * @blink_table_len: size of the blink table
+ *
+ * This function returns %NULL (in case of error, or if no LED
+ * triggers are configured) or the name of the new trigger.
+ * This function must be called before ieee80211_register_hw().
+ */
+static inline char *
+ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags,
+				 const struct ieee80211_tpt_blink *blink_table,
+				 unsigned int blink_table_len)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	return __ieee80211_create_tpt_led_trigger(hw, flags, blink_table,
+						  blink_table_len);
+#else
+	return NULL;
+#endif
+}
+
+/**
  * ieee80211_unregister_hw - Unregister a hardware device
  *
  * This function instructs mac80211 to free allocated resources
@@ -2024,8 +2114,8 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
  *
  * This function may not be called in IRQ context. Calls to this function
  * for a single hardware must be synchronized against each other. Calls
- * to this function and ieee80211_tx_status_irqsafe() may not be mixed
- * for a single hardware.
+ * to this function, ieee80211_tx_status_ni() and ieee80211_tx_status_irqsafe()
+ * may not be mixed for a single hardware.
  *
  * @hw: the hardware the frame was transmitted by
  * @skb: the frame that was transmitted, owned by mac80211 after this call
@@ -2034,13 +2124,33 @@ void ieee80211_tx_status(struct ieee80211_hw *hw,
 			 struct sk_buff *skb);
 
 /**
+ * ieee80211_tx_status_ni - transmit status callback (in process context)
+ *
+ * Like ieee80211_tx_status() but can be called in process context.
+ *
+ * Calls to this function, ieee80211_tx_status() and
+ * ieee80211_tx_status_irqsafe() may not be mixed
+ * for a single hardware.
+ *
+ * @hw: the hardware the frame was transmitted by
+ * @skb: the frame that was transmitted, owned by mac80211 after this call
+ */
+static inline void ieee80211_tx_status_ni(struct ieee80211_hw *hw,
+					  struct sk_buff *skb)
+{
+	local_bh_disable();
+	ieee80211_tx_status(hw, skb);
+	local_bh_enable();
+}
+
+/**
  * ieee80211_tx_status_irqsafe - IRQ-safe transmit status callback
  *
  * Like ieee80211_tx_status() but can be called in IRQ context
  * (internally defers to a tasklet.)
  *
- * Calls to this function and ieee80211_tx_status() may not be mixed for a
- * single hardware.
+ * Calls to this function, ieee80211_tx_status() and
+ * ieee80211_tx_status_ni() may not be mixed for a single hardware.
  *
  * @hw: the hardware the frame was transmitted by
  * @skb: the frame that was transmitted, owned by mac80211 after this call
@@ -2384,6 +2494,7 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
  * ieee80211_start_tx_ba_session - Start a tx Block Ack session.
  * @sta: the station for which to start a BA session
  * @tid: the TID to BA on.
+ * @timeout: session timeout value (in TUs)
  *
  * Return: success if addBA request was sent, failure otherwise
  *
@@ -2391,7 +2502,8 @@ void ieee80211_queue_delayed_work(struct ieee80211_hw *hw,
  * the need to start aggregation on a certain RA/TID, the session level
  * will be managed by the mac80211.
  */
-int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid);
+int ieee80211_start_tx_ba_session(struct ieee80211_sta *sta, u16 tid,
+				  u16 timeout);
 
 /**
  * ieee80211_start_tx_ba_cb_irqsafe - low level driver ready to aggregate.
@@ -2501,6 +2613,21 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
 			       struct ieee80211_sta *pubsta, bool block);
 
 /**
+ * ieee80211_ap_probereq_get - retrieve a Probe Request template
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Creates a Probe Request template which can, for example, be uploaded to
+ * hardware. The template is filled with bssid, ssid and supported rate
+ * information. This function must only be called from within the
+ * .bss_info_changed callback function and only in managed mode. The function
+ * is only useful when the interface is associated, otherwise it will return
+ * NULL.
+ */
+struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
+					  struct ieee80211_vif *vif);
+
+/**
  * ieee80211_beacon_loss - inform hardware does not receive beacons
  *
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
@@ -2609,6 +2736,18 @@ void ieee80211_request_smps(struct ieee80211_vif *vif,
  */
 void ieee80211_key_removed(struct ieee80211_key_conf *key_conf);
 
+/**
+ * ieee80211_ready_on_channel - notification of remain-on-channel start
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ */
+void ieee80211_ready_on_channel(struct ieee80211_hw *hw);
+
+/**
+ * ieee80211_remain_on_channel_expired - remain_on_channel duration expired
+ * @hw: pointer as obtained from ieee80211_alloc_hw()
+ */
+void ieee80211_remain_on_channel_expired(struct ieee80211_hw *hw);
+
 /* Rate control API */
 
 /**
@@ -2640,7 +2779,7 @@ enum rate_control_changed {
  * @rate_idx_mask: user-requested rate mask (not MCS for now)
  * @skb: the skb that will be transmitted, the control information in it needs
  *	to be filled in
- * @ap: whether this frame is sent out in AP mode
+ * @bss: whether this frame is sent out in AP or IBSS mode
  */
 struct ieee80211_tx_rate_control {
 	struct ieee80211_hw *hw;
@@ -2651,7 +2790,7 @@ struct ieee80211_tx_rate_control {
 	bool rts, short_preamble;
 	u8 max_rate_idx;
 	u32 rate_idx_mask;
-	bool ap;
+	bool bss;
 };
 
 struct rate_control_ops {
diff --git a/include/net/ndisc.h b/include/net/ndisc.h
index 895997bc2ea..e0e594f8e9d 100644
--- a/include/net/ndisc.h
+++ b/include/net/ndisc.h
@@ -42,9 +42,6 @@ enum {
 #define ND_REACHABLE_TIME		(30*HZ)
 #define ND_RETRANS_TIMER		HZ
 
-#define ND_MIN_RANDOM_FACTOR		(1/2)
-#define ND_MAX_RANDOM_FACTOR		(3/2)
-
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index 815b2ce9f4a..4014b623880 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -303,7 +303,7 @@ static inline void neigh_confirm(struct neighbour *neigh)
 
 static inline int neigh_event_send(struct neighbour *neigh, struct sk_buff *skb)
 {
-	unsigned long now = ACCESS_ONCE(jiffies);
+	unsigned long now = jiffies;
 	
 	if (neigh->used != now)
 		neigh->used = now;
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 1bf812b21fb..b3b4a34cb2c 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -20,6 +20,7 @@
 #include <net/netns/conntrack.h>
 #endif
 #include <net/netns/xfrm.h>
+#include <net/netns/ip_vs.h>
 
 struct proc_dir_entry;
 struct net_device;
@@ -94,6 +95,7 @@ struct net {
 #ifdef CONFIG_XFRM
 	struct netns_xfrm	xfrm;
 #endif
+	struct netns_ipvs	*ipvs;
 };
 
 
diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h
index 8a58901c96d..2bc344c9821 100644
--- a/include/net/netfilter/nf_conntrack.h
+++ b/include/net/netfilter/nf_conntrack.h
@@ -311,6 +311,8 @@ static inline int nf_ct_is_untracked(const struct nf_conn *ct)
 extern int nf_conntrack_set_hashsize(const char *val, struct kernel_param *kp);
 extern unsigned int nf_conntrack_htable_size;
 extern unsigned int nf_conntrack_max;
+extern unsigned int nf_conntrack_hash_rnd;
+void init_nf_conntrack_hash_rnd(void);
 
 #define NF_CT_STAT_INC(net, count)	\
 	__this_cpu_inc((net)->ct.stat->count)
diff --git a/include/net/netlink.h b/include/net/netlink.h
index 9801c55de5d..373f1a900cf 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -225,13 +225,15 @@ extern int		nlmsg_notify(struct sock *sk, struct sk_buff *skb,
 				     u32 pid, unsigned int group, int report,
 				     gfp_t flags);
 
-extern int		nla_validate(struct nlattr *head, int len, int maxtype,
+extern int		nla_validate(const struct nlattr *head,
+				     int len, int maxtype,
 				     const struct nla_policy *policy);
-extern int		nla_parse(struct nlattr *tb[], int maxtype,
-				  struct nlattr *head, int len,
+extern int		nla_parse(struct nlattr **tb, int maxtype,
+				  const struct nlattr *head, int len,
 				  const struct nla_policy *policy);
 extern int		nla_policy_len(const struct nla_policy *, int);
-extern struct nlattr *	nla_find(struct nlattr *head, int len, int attrtype);
+extern struct nlattr *	nla_find(const struct nlattr *head,
+				 int len, int attrtype);
 extern size_t		nla_strlcpy(char *dst, const struct nlattr *nla,
 				    size_t dstsize);
 extern int		nla_memcpy(void *dest, const struct nlattr *src, int count);
@@ -346,7 +348,8 @@ static inline int nlmsg_ok(const struct nlmsghdr *nlh, int remaining)
  * Returns the next netlink message in the message stream and
  * decrements remaining by the size of the current message.
  */
-static inline struct nlmsghdr *nlmsg_next(struct nlmsghdr *nlh, int *remaining)
+static inline struct nlmsghdr *
+nlmsg_next(const struct nlmsghdr *nlh, int *remaining)
 {
 	int totlen = NLMSG_ALIGN(nlh->nlmsg_len);
 
@@ -398,7 +401,8 @@ static inline struct nlattr *nlmsg_find_attr(const struct nlmsghdr *nlh,
  * @maxtype: maximum attribute type to be expected
  * @policy: validation policy
  */
-static inline int nlmsg_validate(struct nlmsghdr *nlh, int hdrlen, int maxtype,
+static inline int nlmsg_validate(const struct nlmsghdr *nlh,
+				 int hdrlen, int maxtype,
 				 const struct nla_policy *policy)
 {
 	if (nlh->nlmsg_len < nlmsg_msg_size(hdrlen))
@@ -727,7 +731,8 @@ static inline struct nlattr *nla_next(const struct nlattr *nla, int *remaining)
  *
  * Returns the first attribute which matches the specified type.
  */
-static inline struct nlattr *nla_find_nested(struct nlattr *nla, int attrtype)
+static inline struct nlattr *
+nla_find_nested(const struct nlattr *nla, int attrtype)
 {
 	return nla_find(nla_data(nla), nla_len(nla), attrtype);
 }
@@ -1032,7 +1037,7 @@ static inline void nla_nest_cancel(struct sk_buff *skb, struct nlattr *start)
  *
  * Returns 0 on success or a negative error code.
  */
-static inline int nla_validate_nested(struct nlattr *start, int maxtype,
+static inline int nla_validate_nested(const struct nlattr *start, int maxtype,
 				      const struct nla_policy *policy)
 {
 	return nla_validate(nla_data(start), nla_len(start), maxtype, policy);
diff --git a/include/net/netns/generic.h b/include/net/netns/generic.h
index 81a31c0db3e..3419bf5cd15 100644
--- a/include/net/netns/generic.h
+++ b/include/net/netns/generic.h
@@ -30,7 +30,7 @@ struct net_generic {
 	void *ptr[0];
 };
 
-static inline void *net_generic(struct net *net, int id)
+static inline void *net_generic(const struct net *net, int id)
 {
 	struct net_generic *ng;
 	void *ptr;
diff --git a/include/net/netns/ip_vs.h b/include/net/netns/ip_vs.h
new file mode 100644
index 00000000000..259ebac904b
--- /dev/null
+++ b/include/net/netns/ip_vs.h
@@ -0,0 +1,143 @@
+/*
+ *  IP Virtual Server
+ *  Data structure for network namspace
+ *
+ */
+
+#ifndef IP_VS_H_
+#define IP_VS_H_
+
+#include <linux/list.h>
+#include <linux/mutex.h>
+#include <linux/list_nulls.h>
+#include <linux/ip_vs.h>
+#include <asm/atomic.h>
+#include <linux/in.h>
+
+struct ip_vs_stats;
+struct ip_vs_sync_buff;
+struct ctl_table_header;
+
+struct netns_ipvs {
+	int			gen;		/* Generation */
+	/*
+	 *	Hash table: for real service lookups
+	 */
+	#define IP_VS_RTAB_BITS 4
+	#define IP_VS_RTAB_SIZE (1 << IP_VS_RTAB_BITS)
+	#define IP_VS_RTAB_MASK (IP_VS_RTAB_SIZE - 1)
+
+	struct list_head	rs_table[IP_VS_RTAB_SIZE];
+	/* ip_vs_app */
+	struct list_head	app_list;
+	struct mutex		app_mutex;
+	struct lock_class_key	app_key;	/* mutex debuging */
+
+	/* ip_vs_proto */
+	#define IP_VS_PROTO_TAB_SIZE	32	/* must be power of 2 */
+	struct ip_vs_proto_data *proto_data_table[IP_VS_PROTO_TAB_SIZE];
+	/* ip_vs_proto_tcp */
+#ifdef CONFIG_IP_VS_PROTO_TCP
+	#define	TCP_APP_TAB_BITS	4
+	#define	TCP_APP_TAB_SIZE	(1 << TCP_APP_TAB_BITS)
+	#define	TCP_APP_TAB_MASK	(TCP_APP_TAB_SIZE - 1)
+	struct list_head	tcp_apps[TCP_APP_TAB_SIZE];
+	spinlock_t		tcp_app_lock;
+#endif
+	/* ip_vs_proto_udp */
+#ifdef CONFIG_IP_VS_PROTO_UDP
+	#define	UDP_APP_TAB_BITS	4
+	#define	UDP_APP_TAB_SIZE	(1 << UDP_APP_TAB_BITS)
+	#define	UDP_APP_TAB_MASK	(UDP_APP_TAB_SIZE - 1)
+	struct list_head	udp_apps[UDP_APP_TAB_SIZE];
+	spinlock_t		udp_app_lock;
+#endif
+	/* ip_vs_proto_sctp */
+#ifdef CONFIG_IP_VS_PROTO_SCTP
+	#define SCTP_APP_TAB_BITS	4
+	#define SCTP_APP_TAB_SIZE	(1 << SCTP_APP_TAB_BITS)
+	#define SCTP_APP_TAB_MASK	(SCTP_APP_TAB_SIZE - 1)
+	/* Hash table for SCTP application incarnations	 */
+	struct list_head	sctp_apps[SCTP_APP_TAB_SIZE];
+	spinlock_t		sctp_app_lock;
+#endif
+	/* ip_vs_conn */
+	atomic_t		conn_count;      /*  connection counter */
+
+	/* ip_vs_ctl */
+	struct ip_vs_stats		*tot_stats;  /* Statistics & est. */
+	struct ip_vs_cpu_stats __percpu *cpustats;   /* Stats per cpu */
+	seqcount_t			*ustats_seq; /* u64 read retry */
+
+	int			num_services;    /* no of virtual services */
+	/* 1/rate drop and drop-entry variables */
+	struct delayed_work	defense_work;   /* Work handler */
+	int			drop_rate;
+	int			drop_counter;
+	atomic_t		dropentry;
+	/* locks in ctl.c */
+	spinlock_t		dropentry_lock;  /* drop entry handling */
+	spinlock_t		droppacket_lock; /* drop packet handling */
+	spinlock_t		securetcp_lock;  /* state and timeout tables */
+	rwlock_t		rs_lock;         /* real services table */
+	/* semaphore for IPVS sockopts. And, [gs]etsockopt may sleep. */
+	struct lock_class_key	ctl_key;	/* ctl_mutex debuging */
+	/* Trash for destinations */
+	struct list_head	dest_trash;
+	/* Service counters */
+	atomic_t		ftpsvc_counter;
+	atomic_t		nullsvc_counter;
+
+	/* sys-ctl struct */
+	struct ctl_table_header	*sysctl_hdr;
+	struct ctl_table	*sysctl_tbl;
+	/* sysctl variables */
+	int			sysctl_amemthresh;
+	int			sysctl_am_droprate;
+	int			sysctl_drop_entry;
+	int			sysctl_drop_packet;
+	int			sysctl_secure_tcp;
+#ifdef CONFIG_IP_VS_NFCT
+	int			sysctl_conntrack;
+#endif
+	int			sysctl_snat_reroute;
+	int			sysctl_sync_ver;
+	int			sysctl_cache_bypass;
+	int			sysctl_expire_nodest_conn;
+	int			sysctl_expire_quiescent_template;
+	int			sysctl_sync_threshold[2];
+	int			sysctl_nat_icmp_send;
+
+	/* ip_vs_lblc */
+	int			sysctl_lblc_expiration;
+	struct ctl_table_header	*lblc_ctl_header;
+	struct ctl_table	*lblc_ctl_table;
+	/* ip_vs_lblcr */
+	int			sysctl_lblcr_expiration;
+	struct ctl_table_header	*lblcr_ctl_header;
+	struct ctl_table	*lblcr_ctl_table;
+	/* ip_vs_est */
+	struct list_head	est_list;	/* estimator list */
+	spinlock_t		est_lock;
+	struct timer_list	est_timer;	/* Estimation timer */
+	/* ip_vs_sync */
+	struct list_head	sync_queue;
+	spinlock_t		sync_lock;
+	struct ip_vs_sync_buff  *sync_buff;
+	spinlock_t		sync_buff_lock;
+	struct sockaddr_in	sync_mcast_addr;
+	struct task_struct	*master_thread;
+	struct task_struct	*backup_thread;
+	int			send_mesg_maxlen;
+	int			recv_mesg_maxlen;
+	volatile int		sync_state;
+	volatile int		master_syncid;
+	volatile int		backup_syncid;
+	/* multicast interface name */
+	char			master_mcast_ifn[IP_VS_IFNAME_MAXLEN];
+	char			backup_mcast_ifn[IP_VS_IFNAME_MAXLEN];
+	/* net name space ptr */
+	struct net		*net;            /* Needed by timer routines */
+};
+
+#endif /* IP_VS_H_ */
diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h
index dd3031aed9d..9fcc680ab6b 100644
--- a/include/net/pkt_cls.h
+++ b/include/net/pkt_cls.h
@@ -323,7 +323,9 @@ static inline unsigned char * tcf_get_base_ptr(struct sk_buff *skb, int layer)
 static inline int tcf_valid_offset(const struct sk_buff *skb,
 				   const unsigned char *ptr, const int len)
 {
-	return unlikely((ptr + len) < skb_tail_pointer(skb) && ptr > skb->head);
+	return likely((ptr + len) <= skb_tail_pointer(skb) &&
+		      ptr >= skb->head &&
+		      (ptr <= (ptr + len)));
 }
 
 #ifdef CONFIG_NET_CLS_IND
diff --git a/include/net/regulatory.h b/include/net/regulatory.h
index 9e103a4e91e..356d6e3dc20 100644
--- a/include/net/regulatory.h
+++ b/include/net/regulatory.h
@@ -43,6 +43,12 @@ enum environment_cap {
  * @intersect: indicates whether the wireless core should intersect
  * 	the requested regulatory domain with the presently set regulatory
  * 	domain.
+ * @processed: indicates whether or not this requests has already been
+ *	processed. When the last request is processed it means that the
+ *	currently regulatory domain set on cfg80211 is updated from
+ *	CRDA and can be used by other regulatory requests. When a
+ *	the last request is not yet processed we must yield until it
+ *	is processed before processing any new requests.
  * @country_ie_checksum: checksum of the last processed and accepted
  * 	country IE
  * @country_ie_env: lets us know if the AP is telling us we are outdoor,
@@ -54,6 +60,7 @@ struct regulatory_request {
 	enum nl80211_reg_initiator initiator;
 	char alpha2[2];
 	bool intersect;
+	bool processed;
 	enum environment_cap country_ie_env;
 	struct list_head list;
 };
diff --git a/include/net/route.h b/include/net/route.h
index 5cd46d1c0e1..93e10c453f6 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -114,7 +114,7 @@ extern int		ip_rt_init(void);
 extern void		ip_rt_redirect(__be32 old_gw, __be32 dst, __be32 new_gw,
 				       __be32 src, struct net_device *dev);
 extern void		rt_cache_flush(struct net *net, int how);
-extern void		rt_cache_flush_batch(void);
+extern void		rt_cache_flush_batch(struct net *net);
 extern int		__ip_route_output_key(struct net *, struct rtable **, const struct flowi *flp);
 extern int		ip_route_output_key(struct net *, struct rtable **, struct flowi *flp);
 extern int		ip_route_output_flow(struct net *, struct rtable **rp, struct flowi *flp, struct sock *sk, int flags);
@@ -169,14 +169,12 @@ static inline int ip_route_connect(struct rtable **rp, __be32 dst,
 {
 	struct flowi fl = { .oif = oif,
 			    .mark = sk->sk_mark,
-			    .nl_u = { .ip4_u = { .daddr = dst,
-						 .saddr = src,
-						 .tos   = tos } },
+			    .fl4_dst = dst,
+			    .fl4_src = src,
+			    .fl4_tos = tos,
 			    .proto = protocol,
-			    .uli_u = { .ports =
-				       { .sport = sport,
-					 .dport = dport } } };
-
+			    .fl_ip_sport = sport,
+			    .fl_ip_dport = dport };
 	int err;
 	struct net *net = sock_net(sk);
 
@@ -233,4 +231,15 @@ static inline int inet_iif(const struct sk_buff *skb)
 	return skb_rtable(skb)->rt_iif;
 }
 
+extern int sysctl_ip_default_ttl;
+
+static inline int ip4_dst_hoplimit(const struct dst_entry *dst)
+{
+	int hoplimit = dst_metric_raw(dst, RTAX_HOPLIMIT);
+
+	if (hoplimit == 0)
+		hoplimit = sysctl_ip_default_ttl;
+	return hoplimit;
+}
+
 #endif	/* _ROUTE_H */
diff --git a/include/net/rtnetlink.h b/include/net/rtnetlink.h
index e013c68bfb0..4093ca78cf6 100644
--- a/include/net/rtnetlink.h
+++ b/include/net/rtnetlink.h
@@ -83,6 +83,41 @@ extern void	__rtnl_link_unregister(struct rtnl_link_ops *ops);
 extern int	rtnl_link_register(struct rtnl_link_ops *ops);
 extern void	rtnl_link_unregister(struct rtnl_link_ops *ops);
 
+/**
+ * 	struct rtnl_af_ops - rtnetlink address family operations
+ *
+ *	@list: Used internally
+ * 	@family: Address family
+ * 	@fill_link_af: Function to fill IFLA_AF_SPEC with address family
+ * 		       specific netlink attributes.
+ * 	@get_link_af_size: Function to calculate size of address family specific
+ * 			   netlink attributes exlusive the container attribute.
+ *	@validate_link_af: Validate a IFLA_AF_SPEC attribute, must check attr
+ *			   for invalid configuration settings.
+ * 	@set_link_af: Function to parse a IFLA_AF_SPEC attribute and modify
+ *		      net_device accordingly.
+ */
+struct rtnl_af_ops {
+	struct list_head	list;
+	int			family;
+
+	int			(*fill_link_af)(struct sk_buff *skb,
+						const struct net_device *dev);
+	size_t			(*get_link_af_size)(const struct net_device *dev);
+
+	int			(*validate_link_af)(const struct net_device *dev,
+						    const struct nlattr *attr);
+	int			(*set_link_af)(struct net_device *dev,
+					       const struct nlattr *attr);
+};
+
+extern int	__rtnl_af_register(struct rtnl_af_ops *ops);
+extern void	__rtnl_af_unregister(struct rtnl_af_ops *ops);
+
+extern int	rtnl_af_register(struct rtnl_af_ops *ops);
+extern void	rtnl_af_unregister(struct rtnl_af_ops *ops);
+
+
 extern struct net *rtnl_link_get_net(struct net *src_net, struct nlattr *tb[]);
 extern struct net_device *rtnl_create_link(struct net *src_net, struct net *net,
 	char *ifname, const struct rtnl_link_ops *ops, struct nlattr *tb[]);
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index ea1f8a83160..0af57ebae76 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -321,6 +321,7 @@ extern void dev_init_scheduler(struct net_device *dev);
 extern void dev_shutdown(struct net_device *dev);
 extern void dev_activate(struct net_device *dev);
 extern void dev_deactivate(struct net_device *dev);
+extern void dev_deactivate_many(struct list_head *head);
 extern struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
 				     struct Qdisc *qdisc);
 extern void qdisc_reset(struct Qdisc *qdisc);
@@ -610,11 +611,7 @@ static inline struct sk_buff *skb_act_clone(struct sk_buff *skb, gfp_t gfp_mask,
 {
 	struct sk_buff *n;
 
-	if ((action == TC_ACT_STOLEN || action == TC_ACT_QUEUED) &&
-	    !skb_shared(skb))
-		n = skb_get(skb);
-	else
-		n = skb_clone(skb, gfp_mask);
+	n = skb_clone(skb, gfp_mask);
 
 	if (n) {
 		n->tc_verd = SET_TC_VERD(n->tc_verd, 0);
diff --git a/include/net/scm.h b/include/net/scm.h
index 31656506d96..745460fa2f0 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -10,11 +10,12 @@
 /* Well, we should have at least one descriptor open
  * to accept passed FDs 8)
  */
-#define SCM_MAX_FD	255
+#define SCM_MAX_FD	253
 
 struct scm_fp_list {
 	struct list_head	list;
-	int			count;
+	short			count;
+	short			max;
 	struct file		*fp[SCM_MAX_FD];
 };
 
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index 2c55a7ea20a..c01dc99def0 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -111,9 +111,6 @@ typedef enum {
 	SCTP_CMD_LAST
 } sctp_verb_t;
 
-#define SCTP_CMD_MAX		(SCTP_CMD_LAST - 1)
-#define SCTP_CMD_NUM_VERBS	(SCTP_CMD_MAX + 1)
-
 /* How many commands can you put in an sctp_cmd_seq_t?
  * This is a rather arbitrary number, ideally derived from a careful
  * analysis of the state functions, but in reality just taken from
diff --git a/include/net/sctp/constants.h b/include/net/sctp/constants.h
index 63908840eef..c70d8ccc55c 100644
--- a/include/net/sctp/constants.h
+++ b/include/net/sctp/constants.h
@@ -61,7 +61,6 @@ enum { SCTP_DEFAULT_INSTREAMS = SCTP_MAX_STREAM };
  * symbols.  CIDs are dense through SCTP_CID_BASE_MAX.
  */
 #define SCTP_CID_BASE_MAX		SCTP_CID_SHUTDOWN_COMPLETE
-#define SCTP_CID_MAX			SCTP_CID_ASCONF_ACK
 
 #define SCTP_NUM_BASE_CHUNK_TYPES	(SCTP_CID_BASE_MAX + 1)
 
@@ -86,9 +85,6 @@ typedef enum {
 
 } sctp_event_t;
 
-#define SCTP_EVENT_T_MAX SCTP_EVENT_T_PRIMITIVE
-#define SCTP_EVENT_T_NUM (SCTP_EVENT_T_MAX + 1)
-
 /* As a convenience for the state machine, we append SCTP_EVENT_* and
  * SCTP_ULP_* to the list of possible chunks.
  */
@@ -162,9 +158,6 @@ SCTP_SUBTYPE_CONSTRUCTOR(PRIMITIVE,	sctp_event_primitive_t,	primitive)
 		       		- (unsigned long)(c->chunk_hdr)\
 				- sizeof(sctp_data_chunk_t)))
 
-#define SCTP_MAX_ERROR_CAUSE  SCTP_ERROR_NONEXIST_IP
-#define SCTP_NUM_ERROR_CAUSE  10
-
 /* Internal error codes */
 typedef enum {
 
@@ -266,7 +259,6 @@ enum { SCTP_ARBITRARY_COOKIE_ECHO_LEN = 200 };
 #define SCTP_TSN_MAP_INITIAL BITS_PER_LONG
 #define SCTP_TSN_MAP_INCREMENT SCTP_TSN_MAP_INITIAL
 #define SCTP_TSN_MAP_SIZE 4096
-#define SCTP_TSN_MAX_GAP  65535
 
 /* We will not record more than this many duplicate TSNs between two
  * SACKs.  The minimum PMTU is 576.  Remove all the headers and there
@@ -301,9 +293,6 @@ enum { SCTP_MAX_GABS = 16 };
 
 #define SCTP_CLOCK_GRANULARITY	1	/* 1 jiffy */
 
-#define SCTP_DEF_MAX_INIT 6
-#define SCTP_DEF_MAX_SEND 10
-
 #define SCTP_DEFAULT_COOKIE_LIFE	(60 * 1000) /* 60 seconds */
 
 #define SCTP_DEFAULT_MINWINDOW	1500	/* default minimum rwnd size */
@@ -317,9 +306,6 @@ enum { SCTP_MAX_GABS = 16 };
 					 */
 #define SCTP_DEFAULT_MINSEGMENT 512	/* MTU size ... if no mtu disc */
 #define SCTP_HOW_MANY_SECRETS 2		/* How many secrets I keep */
-#define SCTP_HOW_LONG_COOKIE_LIVE 3600	/* How many seconds the current
-					 * secret will live?
-					 */
 #define SCTP_SECRET_SIZE 32		/* Number of octets in a 256 bits. */
 
 #define SCTP_SIGNATURE_SIZE 20	        /* size of a SLA-1 signature */
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 69fef4fb79c..cc9185ca8fd 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -261,8 +261,6 @@ extern struct sctp_globals {
 #define sctp_assoc_hashsize		(sctp_globals.assoc_hashsize)
 #define sctp_assoc_hashtable		(sctp_globals.assoc_hashtable)
 #define sctp_port_hashsize		(sctp_globals.port_hashsize)
-#define sctp_port_rover			(sctp_globals.port_rover)
-#define sctp_port_alloc_lock		(sctp_globals.port_alloc_lock)
 #define sctp_port_hashtable		(sctp_globals.port_hashtable)
 #define sctp_local_addr_list		(sctp_globals.local_addr_list)
 #define sctp_local_addr_lock		(sctp_globals.addr_list_lock)
diff --git a/include/net/snmp.h b/include/net/snmp.h
index a0e61806d48..762e2abce88 100644
--- a/include/net/snmp.h
+++ b/include/net/snmp.h
@@ -60,9 +60,7 @@ struct ipstats_mib {
 };
 
 /* ICMP */
-#define ICMP_MIB_DUMMY	__ICMP_MIB_MAX
-#define ICMP_MIB_MAX	(__ICMP_MIB_MAX + 1)
-
+#define ICMP_MIB_MAX	__ICMP_MIB_MAX
 struct icmp_mib {
 	unsigned long	mibs[ICMP_MIB_MAX];
 };
diff --git a/include/net/sock.h b/include/net/sock.h
index c7a736228ca..21a02f7e4f4 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -57,7 +57,7 @@
 #include <linux/rculist_nulls.h>
 #include <linux/poll.h>
 
-#include <asm/atomic.h>
+#include <linux/atomic.h>
 #include <net/dst.h>
 #include <net/checksum.h>
 
@@ -105,10 +105,8 @@ struct net;
 
 /**
  *	struct sock_common - minimal network layer representation of sockets
- *	@skc_node: main hash linkage for various protocol lookup tables
- *	@skc_nulls_node: main hash linkage for TCP/UDP/UDP-Lite protocol
- *	@skc_refcnt: reference count
- *	@skc_tx_queue_mapping: tx queue number for this connection
+ *	@skc_daddr: Foreign IPv4 addr
+ *	@skc_rcv_saddr: Bound local IPv4 addr
  *	@skc_hash: hash value used with various protocol lookup tables
  *	@skc_u16hashes: two u16 hash values used by UDP lookup tables
  *	@skc_family: network address family
@@ -119,20 +117,20 @@ struct net;
  *	@skc_portaddr_node: second hash linkage for UDP/UDP-Lite protocol
  *	@skc_prot: protocol handlers inside a network family
  *	@skc_net: reference to the network namespace of this socket
+ *	@skc_node: main hash linkage for various protocol lookup tables
+ *	@skc_nulls_node: main hash linkage for TCP/UDP/UDP-Lite protocol
+ *	@skc_tx_queue_mapping: tx queue number for this connection
+ *	@skc_refcnt: reference count
  *
  *	This is the minimal network layer representation of sockets, the header
  *	for struct sock and struct inet_timewait_sock.
  */
 struct sock_common {
-	/*
-	 * first fields are not copied in sock_copy()
+	/* skc_daddr and skc_rcv_saddr must be grouped :
+	 * cf INET_MATCH() and INET_TW_MATCH()
 	 */
-	union {
-		struct hlist_node	skc_node;
-		struct hlist_nulls_node skc_nulls_node;
-	};
-	atomic_t		skc_refcnt;
-	int			skc_tx_queue_mapping;
+	__be32			skc_daddr;
+	__be32			skc_rcv_saddr;
 
 	union  {
 		unsigned int	skc_hash;
@@ -150,6 +148,18 @@ struct sock_common {
 #ifdef CONFIG_NET_NS
 	struct net	 	*skc_net;
 #endif
+	/*
+	 * fields between dontcopy_begin/dontcopy_end
+	 * are not copied in sock_copy()
+	 */
+	int			skc_dontcopy_begin[0];
+	union {
+		struct hlist_node	skc_node;
+		struct hlist_nulls_node skc_nulls_node;
+	};
+	int			skc_tx_queue_mapping;
+	atomic_t		skc_refcnt;
+	int                     skc_dontcopy_end[0];
 };
 
 /**
@@ -232,7 +242,8 @@ struct sock {
 #define sk_refcnt		__sk_common.skc_refcnt
 #define sk_tx_queue_mapping	__sk_common.skc_tx_queue_mapping
 
-#define sk_copy_start		__sk_common.skc_hash
+#define sk_dontcopy_begin	__sk_common.skc_dontcopy_begin
+#define sk_dontcopy_end		__sk_common.skc_dontcopy_end
 #define sk_hash			__sk_common.skc_hash
 #define sk_family		__sk_common.skc_family
 #define sk_state		__sk_common.skc_state
@@ -241,59 +252,67 @@ struct sock {
 #define sk_bind_node		__sk_common.skc_bind_node
 #define sk_prot			__sk_common.skc_prot
 #define sk_net			__sk_common.skc_net
-	kmemcheck_bitfield_begin(flags);
-	unsigned int		sk_shutdown  : 2,
-				sk_no_check  : 2,
-				sk_userlocks : 4,
-				sk_protocol  : 8,
-				sk_type      : 16;
-	kmemcheck_bitfield_end(flags);
-	int			sk_rcvbuf;
 	socket_lock_t		sk_lock;
+	struct sk_buff_head	sk_receive_queue;
 	/*
 	 * The backlog queue is special, it is always used with
 	 * the per-socket spinlock held and requires low latency
 	 * access. Therefore we special case it's implementation.
+	 * Note : rmem_alloc is in this structure to fill a hole
+	 * on 64bit arches, not because its logically part of
+	 * backlog.
 	 */
 	struct {
-		struct sk_buff *head;
-		struct sk_buff *tail;
-		int len;
+		atomic_t	rmem_alloc;
+		int		len;
+		struct sk_buff	*head;
+		struct sk_buff	*tail;
 	} sk_backlog;
+#define sk_rmem_alloc sk_backlog.rmem_alloc
+	int			sk_forward_alloc;
+#ifdef CONFIG_RPS
+	__u32			sk_rxhash;
+#endif
+	atomic_t		sk_drops;
+	int			sk_rcvbuf;
+
+	struct sk_filter __rcu	*sk_filter;
 	struct socket_wq	*sk_wq;
-	struct dst_entry	*sk_dst_cache;
+
+#ifdef CONFIG_NET_DMA
+	struct sk_buff_head	sk_async_wait_queue;
+#endif
+
 #ifdef CONFIG_XFRM
 	struct xfrm_policy	*sk_policy[2];
 #endif
+	unsigned long 		sk_flags;
+	struct dst_entry	*sk_dst_cache;
 	spinlock_t		sk_dst_lock;
-	atomic_t		sk_rmem_alloc;
 	atomic_t		sk_wmem_alloc;
 	atomic_t		sk_omem_alloc;
 	int			sk_sndbuf;
-	struct sk_buff_head	sk_receive_queue;
 	struct sk_buff_head	sk_write_queue;
-#ifdef CONFIG_NET_DMA
-	struct sk_buff_head	sk_async_wait_queue;
-#endif
+	kmemcheck_bitfield_begin(flags);
+	unsigned int		sk_shutdown  : 2,
+				sk_no_check  : 2,
+				sk_userlocks : 4,
+				sk_protocol  : 8,
+				sk_type      : 16;
+	kmemcheck_bitfield_end(flags);
 	int			sk_wmem_queued;
-	int			sk_forward_alloc;
 	gfp_t			sk_allocation;
 	int			sk_route_caps;
 	int			sk_route_nocaps;
 	int			sk_gso_type;
 	unsigned int		sk_gso_max_size;
 	int			sk_rcvlowat;
-#ifdef CONFIG_RPS
-	__u32			sk_rxhash;
-#endif
-	unsigned long 		sk_flags;
 	unsigned long	        sk_lingertime;
 	struct sk_buff_head	sk_error_queue;
 	struct proto		*sk_prot_creator;
 	rwlock_t		sk_callback_lock;
 	int			sk_err,
 				sk_err_soft;
-	atomic_t		sk_drops;
 	unsigned short		sk_ack_backlog;
 	unsigned short		sk_max_ack_backlog;
 	__u32			sk_priority;
@@ -301,7 +320,6 @@ struct sock {
 	const struct cred	*sk_peer_cred;
 	long			sk_rcvtimeo;
 	long			sk_sndtimeo;
-	struct sk_filter __rcu	*sk_filter;
 	void			*sk_protinfo;
 	struct timer_list	sk_timer;
 	ktime_t			sk_stamp;
@@ -509,9 +527,6 @@ static __inline__ void sk_add_bind_node(struct sock *sk,
 #define sk_nulls_for_each_from(__sk, node) \
 	if (__sk && ({ node = &(__sk)->sk_nulls_node; 1; })) \
 		hlist_nulls_for_each_entry_from(__sk, node, sk_nulls_node)
-#define sk_for_each_continue(__sk, node) \
-	if (__sk && ({ node = &(__sk)->sk_node; 1; })) \
-		hlist_for_each_entry_continue(__sk, node, sk_node)
 #define sk_for_each_safe(__sk, node, tmp, list) \
 	hlist_for_each_entry_safe(__sk, node, tmp, list, sk_node)
 #define sk_for_each_bound(__sk, node, list) \
@@ -754,6 +769,7 @@ struct proto {
 	void			(*unhash)(struct sock *sk);
 	void			(*rehash)(struct sock *sk);
 	int			(*get_port)(struct sock *sk, unsigned short snum);
+	void			(*clear_sk)(struct sock *sk, int size);
 
 	/* Keeping track of sockets in use */
 #ifdef CONFIG_PROC_FS
@@ -762,7 +778,7 @@ struct proto {
 
 	/* Memory pressure */
 	void			(*enter_memory_pressure)(struct sock *sk);
-	atomic_t		*memory_allocated;	/* Current allocated memory. */
+	atomic_long_t		*memory_allocated;	/* Current allocated memory. */
 	struct percpu_counter	*sockets_allocated;	/* Current number of sockets. */
 	/*
 	 * Pressure flag: try to collapse.
@@ -771,7 +787,7 @@ struct proto {
 	 * is strict, actions are advisory and have some latency.
 	 */
 	int			*memory_pressure;
-	int			*sysctl_mem;
+	long			*sysctl_mem;
 	int			*sysctl_wmem;
 	int			*sysctl_rmem;
 	int			max_header;
@@ -852,6 +868,8 @@ static inline void __sk_prot_rehash(struct sock *sk)
 	sk->sk_prot->hash(sk);
 }
 
+void sk_prot_clear_portaddr_nulls(struct sock *sk, int size);
+
 /* About 10 seconds */
 #define SOCK_DESTROY_TIME (10*HZ)
 
@@ -1155,6 +1173,8 @@ extern void sk_common_release(struct sock *sk);
 /* Initialise core socket variables */
 extern void sock_init_data(struct socket *sock, struct sock *sk);
 
+extern void sk_filter_release_rcu(struct rcu_head *rcu);
+
 /**
  *	sk_filter_release - release a socket filter
  *	@fp: filter to remove
@@ -1165,7 +1185,7 @@ extern void sock_init_data(struct socket *sock, struct sock *sk);
 static inline void sk_filter_release(struct sk_filter *fp)
 {
 	if (atomic_dec_and_test(&fp->refcnt))
-		kfree(fp);
+		call_rcu_bh(&fp->rcu, sk_filter_release_rcu);
 }
 
 static inline void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 4fee0424af7..38509f04738 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -60,6 +60,9 @@ extern void tcp_time_wait(struct sock *sk, int state, int timeo);
  */
 #define MAX_TCP_WINDOW		32767U
 
+/* Offer an initial receive window of 10 mss. */
+#define TCP_DEFAULT_INIT_RCVWND	10
+
 /* Minimal accepted MSS. It is (60+60+8) - (20+20). */
 #define TCP_MIN_MSS		88U
 
@@ -100,12 +103,6 @@ extern void tcp_time_wait(struct sock *sk, int state, int timeo);
 #define TCP_SYNACK_RETRIES 5	/* number of times to retry passive opening a
 				 * connection: ~180sec is RFC minimum	*/
 
-
-#define TCP_ORPHAN_RETRIES 7	/* number of times to retry on an orphaned
-				 * socket. 7 is ~50sec-16min.
-				 */
-
-
 #define TCP_TIMEWAIT_LEN (60*HZ) /* how long to wait to destroy TIME-WAIT
 				  * state, about 60 seconds	*/
 #define TCP_FIN_TIMEOUT	TCP_TIMEWAIT_LEN
@@ -224,7 +221,7 @@ extern int sysctl_tcp_fack;
 extern int sysctl_tcp_reordering;
 extern int sysctl_tcp_ecn;
 extern int sysctl_tcp_dsack;
-extern int sysctl_tcp_mem[3];
+extern long sysctl_tcp_mem[3];
 extern int sysctl_tcp_wmem[3];
 extern int sysctl_tcp_rmem[3];
 extern int sysctl_tcp_app_win;
@@ -247,7 +244,7 @@ extern int sysctl_tcp_cookie_size;
 extern int sysctl_tcp_thin_linear_timeouts;
 extern int sysctl_tcp_thin_dupack;
 
-extern atomic_t tcp_memory_allocated;
+extern atomic_long_t tcp_memory_allocated;
 extern struct percpu_counter tcp_sockets_allocated;
 extern int tcp_memory_pressure;
 
@@ -280,7 +277,7 @@ static inline bool tcp_too_many_orphans(struct sock *sk, int shift)
 	}
 
 	if (sk->sk_wmem_queued > SOCK_MIN_SNDBUF &&
-	    atomic_read(&tcp_memory_allocated) > sysctl_tcp_mem[2])
+	    atomic_long_read(&tcp_memory_allocated) > sysctl_tcp_mem[2])
 		return true;
 	return false;
 }
@@ -312,7 +309,8 @@ extern void tcp_shutdown (struct sock *sk, int how);
 
 extern int tcp_v4_rcv(struct sk_buff *skb);
 
-extern int tcp_v4_remember_stamp(struct sock *sk);
+extern struct inet_peer *tcp_v4_get_peer(struct sock *sk, bool *release_it);
+extern void *tcp_v4_tw_get_peer(struct sock *sk);
 extern int tcp_v4_tw_remember_stamp(struct inet_timewait_sock *tw);
 extern int tcp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 		       size_t size);
@@ -1043,7 +1041,13 @@ static inline int tcp_paws_check(const struct tcp_options_received *rx_opt,
 		return 1;
 	if (unlikely(get_seconds() >= rx_opt->ts_recent_stamp + TCP_PAWS_24DAYS))
 		return 1;
-
+	/*
+	 * Some OSes send SYN and SYNACK messages with tsval=0 tsecr=0,
+	 * then following tcp messages have valid values. Ignore 0 value,
+	 * or else 'negative' tsval might forbid us to accept their packets.
+	 */
+	if (!rx_opt->ts_recent)
+		return 1;
 	return 0;
 }
 
@@ -1157,8 +1161,6 @@ struct tcp_md5sig_pool {
 	union tcp_md5sum_block	md5_blk;
 };
 
-#define TCP_MD5SIG_MAXKEYS	(~(u32)0)	/* really?! */
-
 /* - functions */
 extern int tcp_v4_md5_hash_skb(char *md5_hash, struct tcp_md5sig_key *key,
 			       struct sock *sk, struct request_sock *req,
diff --git a/include/net/timewait_sock.h b/include/net/timewait_sock.h
index 97c3b14da55..053b3cf2c66 100644
--- a/include/net/timewait_sock.h
+++ b/include/net/timewait_sock.h
@@ -21,6 +21,7 @@ struct timewait_sock_ops {
 	int		(*twsk_unique)(struct sock *sk,
 				       struct sock *sktw, void *twp);
 	void		(*twsk_destructor)(struct sock *sk);
+	void		*(*twsk_getpeer)(struct sock *sk);
 };
 
 static inline int twsk_unique(struct sock *sk, struct sock *sktw, void *twp)
@@ -39,4 +40,11 @@ static inline void twsk_destructor(struct sock *sk)
 		sk->sk_prot->twsk_prot->twsk_destructor(sk);
 }
 
+static inline void *twsk_getpeer(struct sock *sk)
+{
+	if (sk->sk_prot->twsk_prot->twsk_getpeer)
+		return sk->sk_prot->twsk_prot->twsk_getpeer(sk);
+	return NULL;
+}
+
 #endif /* _TIMEWAIT_SOCK_H */
diff --git a/include/net/tipc/tipc.h b/include/net/tipc/tipc.h
deleted file mode 100644
index 1e0645e1eed..00000000000
--- a/include/net/tipc/tipc.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * include/net/tipc/tipc.h: Main include file for TIPC users
- * 
- * Copyright (c) 2003-2006, Ericsson AB
- * Copyright (c) 2005,2010 Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _NET_TIPC_H_
-#define _NET_TIPC_H_
-
-#ifdef __KERNEL__
-
-#include <linux/tipc.h>
-#include <linux/skbuff.h>
-
-/* 
- * Native API
- */
-
-/*
- * TIPC operating mode routines
- */
-
-#define TIPC_NOT_RUNNING  0
-#define TIPC_NODE_MODE    1
-#define TIPC_NET_MODE     2
-
-typedef void (*tipc_mode_event)(void *usr_handle, int mode, u32 addr);
-
-int tipc_attach(unsigned int *userref, tipc_mode_event, void *usr_handle);
-
-void tipc_detach(unsigned int userref);
-
-/*
- * TIPC port manipulation routines
- */
-
-typedef void (*tipc_msg_err_event) (void *usr_handle,
-				    u32 portref,
-				    struct sk_buff **buf,
-				    unsigned char const *data,
-				    unsigned int size,
-				    int reason, 
-				    struct tipc_portid const *attmpt_destid);
-
-typedef void (*tipc_named_msg_err_event) (void *usr_handle,
-					  u32 portref,
-					  struct sk_buff **buf,
-					  unsigned char const *data,
-					  unsigned int size,
-					  int reason, 
-					  struct tipc_name_seq const *attmpt_dest);
-
-typedef void (*tipc_conn_shutdown_event) (void *usr_handle,
-					  u32 portref,
-					  struct sk_buff **buf,
-					  unsigned char const *data,
-					  unsigned int size,
-					  int reason);
-
-typedef void (*tipc_msg_event) (void *usr_handle,
-				u32 portref,
-				struct sk_buff **buf,
-				unsigned char const *data,
-				unsigned int size,
-				unsigned int importance, 
-				struct tipc_portid const *origin);
-
-typedef void (*tipc_named_msg_event) (void *usr_handle,
-				      u32 portref,
-				      struct sk_buff **buf,
-				      unsigned char const *data,
-				      unsigned int size,
-				      unsigned int importance, 
-				      struct tipc_portid const *orig,
-				      struct tipc_name_seq const *dest);
-
-typedef void (*tipc_conn_msg_event) (void *usr_handle,
-				     u32 portref,
-				     struct sk_buff **buf,
-				     unsigned char const *data,
-				     unsigned int size);
-
-typedef void (*tipc_continue_event) (void *usr_handle, 
-				     u32 portref);
-
-int tipc_createport(unsigned int tipc_user, 
-		    void *usr_handle, 
-		    unsigned int importance, 
-		    tipc_msg_err_event error_cb, 
-		    tipc_named_msg_err_event named_error_cb, 
-		    tipc_conn_shutdown_event conn_error_cb, 
-		    tipc_msg_event message_cb, 
-		    tipc_named_msg_event named_message_cb, 
-		    tipc_conn_msg_event conn_message_cb, 
-		    tipc_continue_event continue_event_cb,
-		    u32 *portref);
-
-int tipc_deleteport(u32 portref);
-
-int tipc_ownidentity(u32 portref, struct tipc_portid *port);
-
-int tipc_portimportance(u32 portref, unsigned int *importance);
-int tipc_set_portimportance(u32 portref, unsigned int importance);
-
-int tipc_portunreliable(u32 portref, unsigned int *isunreliable);
-int tipc_set_portunreliable(u32 portref, unsigned int isunreliable);
-
-int tipc_portunreturnable(u32 portref, unsigned int *isunreturnable);
-int tipc_set_portunreturnable(u32 portref, unsigned int isunreturnable);
-
-int tipc_publish(u32 portref, unsigned int scope, 
-		 struct tipc_name_seq const *name_seq);
-int tipc_withdraw(u32 portref, unsigned int scope,
-		  struct tipc_name_seq const *name_seq);
-
-int tipc_connect2port(u32 portref, struct tipc_portid const *port);
-
-int tipc_disconnect(u32 portref);
-
-int tipc_shutdown(u32 ref);
-
-/*
- * TIPC messaging routines
- */
-
-#define TIPC_PORT_IMPORTANCE 100	/* send using current port setting */
-
-
-int tipc_send(u32 portref,
-	      unsigned int num_sect,
-	      struct iovec const *msg_sect);
-
-int tipc_send2name(u32 portref, 
-		   struct tipc_name const *name, 
-		   u32 domain,
-		   unsigned int num_sect,
-		   struct iovec const *msg_sect);
-
-int tipc_send2port(u32 portref,
-		   struct tipc_portid const *dest,
-		   unsigned int num_sect,
-		   struct iovec const *msg_sect);
-
-int tipc_send_buf2port(u32 portref,
-		       struct tipc_portid const *dest,
-		       struct sk_buff *buf,
-		       unsigned int dsz);
-
-int tipc_multicast(u32 portref, 
-		   struct tipc_name_seq const *seq, 
-		   u32 domain,	/* currently unused */
-		   unsigned int section_count,
-		   struct iovec const *msg);
-#endif
-
-#endif
diff --git a/include/net/tipc/tipc_bearer.h b/include/net/tipc/tipc_bearer.h
deleted file mode 100644
index ee2f304e491..00000000000
--- a/include/net/tipc/tipc_bearer.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/net/tipc/tipc_bearer.h: Include file for privileged access to TIPC bearers
- * 
- * Copyright (c) 2003-2006, Ericsson AB
- * Copyright (c) 2005, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _NET_TIPC_BEARER_H_
-#define _NET_TIPC_BEARER_H_
-
-#ifdef __KERNEL__
-
-#include <linux/tipc_config.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-
-/*
- * Identifiers of supported TIPC media types
- */
-
-#define TIPC_MEDIA_TYPE_ETH	1
-
-/* 
- * Destination address structure used by TIPC bearers when sending messages
- * 
- * IMPORTANT: The fields of this structure MUST be stored using the specified
- * byte order indicated below, as the structure is exchanged between nodes
- * as part of a link setup process.
- */
-
-struct tipc_media_addr {
-	__be32  type;			/* bearer type (network byte order) */
-	union {
-		__u8   eth_addr[6];	/* 48 bit Ethernet addr (byte array) */ 
-#if 0
-		/* Prototypes for other possible bearer types */
-
-		struct {
-			__u16 sin_family;
-			__u16 sin_port;
-			struct {
-				__u32 s_addr;
-			} sin_addr;
-			char pad[4];
-		} addr_in;		/* IP-based bearer */
-		__u16  sock_descr;	/* generic socket bearer */
-#endif
-	} dev_addr;
-};
-
-/**
- * struct tipc_bearer - TIPC bearer info available to privileged users
- * @usr_handle: pointer to additional user-defined information about bearer
- * @mtu: max packet size bearer can support
- * @blocked: non-zero if bearer is blocked
- * @lock: spinlock for controlling access to bearer
- * @addr: media-specific address associated with bearer
- * @name: bearer name (format = media:interface)
- * 
- * Note: TIPC initializes "name" and "lock" fields; user is responsible for
- * initialization all other fields when a bearer is enabled.
- */
-
-struct tipc_bearer {
-	void *usr_handle;
-	u32 mtu;
-	int blocked;
-	spinlock_t lock;
-	struct tipc_media_addr addr;
-	char name[TIPC_MAX_BEARER_NAME];
-};
-
-/*
- * TIPC routines available to supported media types
- */
-
-int  tipc_register_media(u32 media_type,
-			 char *media_name, 
-			 int (*enable)(struct tipc_bearer *), 
-			 void (*disable)(struct tipc_bearer *), 
-			 int (*send_msg)(struct sk_buff *, 
-					 struct tipc_bearer *,
-					 struct tipc_media_addr *), 
-			 char *(*addr2str)(struct tipc_media_addr *a,
-					   char *str_buf,
-					   int str_size),
-			 struct tipc_media_addr *bcast_addr,
-			 const u32 bearer_priority,
-			 const u32 link_tolerance,  /* [ms] */
-			 const u32 send_window_limit); 
-
-void tipc_recv_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
-
-int  tipc_block_bearer(const char *name);
-void tipc_continue(struct tipc_bearer *tb_ptr); 
-
-int tipc_enable_bearer(const char *bearer_name, u32 bcast_scope, u32 priority);
-int tipc_disable_bearer(const char *name);
-
-/*
- * Routines made available to TIPC by supported media types
- */
-
-int  tipc_eth_media_start(void);
-void tipc_eth_media_stop(void);
-
-#endif
-
-#endif
diff --git a/include/net/tipc/tipc_msg.h b/include/net/tipc/tipc_msg.h
deleted file mode 100644
index ffe50b4e7b9..00000000000
--- a/include/net/tipc/tipc_msg.h
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * include/net/tipc/tipc_msg.h: Include file for privileged access to TIPC message headers
- * 
- * Copyright (c) 2003-2006, Ericsson AB
- * Copyright (c) 2005, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _NET_TIPC_MSG_H_
-#define _NET_TIPC_MSG_H_
-
-#ifdef __KERNEL__
-
-struct tipc_msg {
-	__be32 hdr[15];
-};
-
-
-/*
-		TIPC user data message header format, version 2:
-
-
-       1 0 9 8 7 6 5 4|3 2 1 0 9 8 7 6|5 4 3 2 1 0 9 8|7 6 5 4 3 2 1 0 
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w0:|vers | user  |hdr sz |n|d|s|-|          message size           |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w1:|mstyp| error |rer cnt|lsc|opt p|      broadcast ack no         |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w2:|        link level ack no      |   broadcast/link level seq no |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w3:|                       previous node                           |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w4:|                      originating port                         |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w5:|                      destination port                         |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+    
-   w6:|                      originating node                         |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w7:|                      destination node                         |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w8:|            name type / transport sequence number              |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-   w9:|              name instance/multicast lower bound              |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+    
-   wA:|                    multicast upper bound                      |
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+    
-      /                                                               /
-      \                           options                             \
-      /                                                               /
-      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
-
-*/
-
-#define TIPC_CONN_MSG	0
-#define TIPC_MCAST_MSG	1
-#define TIPC_NAMED_MSG	2
-#define TIPC_DIRECT_MSG	3
-
-
-static inline u32 msg_word(struct tipc_msg *m, u32 pos)
-{
-	return ntohl(m->hdr[pos]);
-}
-
-static inline u32 msg_bits(struct tipc_msg *m, u32 w, u32 pos, u32 mask)
-{
-	return (msg_word(m, w) >> pos) & mask;
-}
-
-static inline u32 msg_importance(struct tipc_msg *m)
-{
-	return msg_bits(m, 0, 25, 0xf);
-}
-
-static inline u32 msg_hdr_sz(struct tipc_msg *m)
-{
-	return msg_bits(m, 0, 21, 0xf) << 2;
-}
-
-static inline int msg_short(struct tipc_msg *m)
-{
-	return msg_hdr_sz(m) == 24;
-}
-
-static inline u32 msg_size(struct tipc_msg *m)
-{
-	return msg_bits(m, 0, 0, 0x1ffff);
-}
-
-static inline u32 msg_data_sz(struct tipc_msg *m)
-{
-	return msg_size(m) - msg_hdr_sz(m);
-}
-
-static inline unchar *msg_data(struct tipc_msg *m)
-{
-	return ((unchar *)m) + msg_hdr_sz(m);
-}
-
-static inline u32 msg_type(struct tipc_msg *m)
-{
-	return msg_bits(m, 1, 29, 0x7);
-}
-
-static inline u32 msg_named(struct tipc_msg *m)
-{
-	return msg_type(m) == TIPC_NAMED_MSG;
-}
-
-static inline u32 msg_mcast(struct tipc_msg *m)
-{
-	return msg_type(m) == TIPC_MCAST_MSG;
-}
-
-static inline u32 msg_connected(struct tipc_msg *m)
-{
-	return msg_type(m) == TIPC_CONN_MSG;
-}
-
-static inline u32 msg_errcode(struct tipc_msg *m)
-{
-	return msg_bits(m, 1, 25, 0xf);
-}
-
-static inline u32 msg_prevnode(struct tipc_msg *m)
-{
-	return msg_word(m, 3);
-}
-
-static inline u32 msg_origport(struct tipc_msg *m)
-{
-	return msg_word(m, 4);
-}
-
-static inline u32 msg_destport(struct tipc_msg *m)
-{
-	return msg_word(m, 5);
-}
-
-static inline u32 msg_mc_netid(struct tipc_msg *m)
-{
-	return msg_word(m, 5);
-}
-
-static inline u32 msg_orignode(struct tipc_msg *m)
-{
-	if (likely(msg_short(m)))
-		return msg_prevnode(m);
-	return msg_word(m, 6);
-}
-
-static inline u32 msg_destnode(struct tipc_msg *m)
-{
-	return msg_word(m, 7);
-}
-
-static inline u32 msg_nametype(struct tipc_msg *m)
-{
-	return msg_word(m, 8);
-}
-
-static inline u32 msg_nameinst(struct tipc_msg *m)
-{
-	return msg_word(m, 9);
-}
-
-static inline u32 msg_namelower(struct tipc_msg *m)
-{
-	return msg_nameinst(m);
-}
-
-static inline u32 msg_nameupper(struct tipc_msg *m)
-{
-	return msg_word(m, 10);
-}
-
-#endif
-
-#endif
diff --git a/include/net/tipc/tipc_port.h b/include/net/tipc/tipc_port.h
deleted file mode 100644
index 1893aaf4942..00000000000
--- a/include/net/tipc/tipc_port.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * include/net/tipc/tipc_port.h: Include file for privileged access to TIPC ports
- * 
- * Copyright (c) 1994-2007, Ericsson AB
- * Copyright (c) 2005-2008, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _NET_TIPC_PORT_H_
-#define _NET_TIPC_PORT_H_
-
-#ifdef __KERNEL__
-
-#include <linux/tipc.h>
-#include <linux/skbuff.h>
-#include <net/tipc/tipc_msg.h>
-
-#define TIPC_FLOW_CONTROL_WIN 512
-
-/**
- * struct tipc_port - native TIPC port info available to privileged users
- * @usr_handle: pointer to additional user-defined information about port
- * @lock: pointer to spinlock for controlling access to port
- * @connected: non-zero if port is currently connected to a peer port
- * @conn_type: TIPC type used when connection was established
- * @conn_instance: TIPC instance used when connection was established
- * @conn_unacked: number of unacknowledged messages received from peer port
- * @published: non-zero if port has one or more associated names
- * @congested: non-zero if cannot send because of link or port congestion
- * @max_pkt: maximum packet size "hint" used when building messages sent by port
- * @ref: unique reference to port in TIPC object registry
- * @phdr: preformatted message header used when sending messages
- */
-
-struct tipc_port {
-        void *usr_handle;
-        spinlock_t *lock;
-	int connected;
-        u32 conn_type;
-        u32 conn_instance;
-	u32 conn_unacked;
-	int published;
-	u32 congested;
-	u32 max_pkt;
-	u32 ref;
-	struct tipc_msg phdr;
-};
-
-
-struct tipc_port *tipc_createport_raw(void *usr_handle,
-			u32 (*dispatcher)(struct tipc_port *, struct sk_buff *),
-			void (*wakeup)(struct tipc_port *),
-			const u32 importance);
-
-int tipc_reject_msg(struct sk_buff *buf, u32 err);
-
-int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode);
-
-void tipc_acknowledge(u32 port_ref,u32 ack);
-
-struct tipc_port *tipc_get_port(const u32 ref);
-
-/*
- * The following routines require that the port be locked on entry
- */
-
-int tipc_disconnect_port(struct tipc_port *tp_ptr);
-
-
-#endif
-
-#endif
-
diff --git a/include/net/udp.h b/include/net/udp.h
index 200b82848c9..bb967dd59bf 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -105,10 +105,10 @@ static inline struct udp_hslot *udp_hashslot2(struct udp_table *table,
 
 extern struct proto udp_prot;
 
-extern atomic_t udp_memory_allocated;
+extern atomic_long_t udp_memory_allocated;
 
 /* sysctl variables for udp */
-extern int sysctl_udp_mem[3];
+extern long sysctl_udp_mem[3];
 extern int sysctl_udp_rmem_min;
 extern int sysctl_udp_wmem_min;
 
diff --git a/include/net/x25.h b/include/net/x25.h
index 1479cb4a41f..a06119a0512 100644
--- a/include/net/x25.h
+++ b/include/net/x25.h
@@ -315,6 +315,8 @@ extern struct list_head x25_route_list;
 extern rwlock_t x25_route_list_lock;
 extern struct list_head x25_forward_list;
 extern rwlock_t x25_forward_list_lock;
+extern struct list_head x25_neigh_list;
+extern rwlock_t x25_neigh_list_lock;
 
 extern int x25_proc_init(void);
 extern void x25_proc_exit(void);
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index bcfb6b24b01..b9f385da758 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -143,6 +143,7 @@ struct xfrm_state {
 	struct xfrm_id		id;
 	struct xfrm_selector	sel;
 	struct xfrm_mark	mark;
+	u32			tfcpad;
 
 	u32			genid;
 
@@ -805,6 +806,9 @@ __be16 xfrm_flowi_sport(struct flowi *fl)
 	case IPPROTO_MH:
 		port = htons(fl->fl_mh_type);
 		break;
+	case IPPROTO_GRE:
+		port = htons(ntohl(fl->fl_gre_key) >> 16);
+		break;
 	default:
 		port = 0;	/*XXX*/
 	}
@@ -826,6 +830,9 @@ __be16 xfrm_flowi_dport(struct flowi *fl)
 	case IPPROTO_ICMPV6:
 		port = htons(fl->fl_icmp_code);
 		break;
+	case IPPROTO_GRE:
+		port = htons(ntohl(fl->fl_gre_key) & 0xffff);
+		break;
 	default:
 		port = 0;	/*XXX*/
 	}
diff --git a/include/scsi/iscsi_if.h b/include/scsi/iscsi_if.h
index a8631acd37c..c3e1cbcc2ad 100644
--- a/include/scsi/iscsi_if.h
+++ b/include/scsi/iscsi_if.h
@@ -263,6 +263,7 @@ enum iscsi_err {
 	ISCSI_ERR_INVALID_HOST		= ISCSI_ERR_BASE + 18,
 	ISCSI_ERR_XMIT_FAILED		= ISCSI_ERR_BASE + 19,
 	ISCSI_ERR_TCP_CONN_CLOSE	= ISCSI_ERR_BASE + 20,
+	ISCSI_ERR_SCSI_EH_SESSION_RST	= ISCSI_ERR_BASE + 21,
 };
 
 /*
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index f986ab7ffe6..f53c8e31d5f 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -221,8 +221,8 @@ struct fc_rport_priv {
  * @InputRequests:         Number of input requests
  * @OutputRequests:        Number of output requests
  * @ControlRequests:       Number of control requests
- * @InputMegabytes:        Number of received megabytes
- * @OutputMegabytes:       Number of transmitted megabytes
+ * @InputBytes:            Number of received bytes
+ * @OutputBytes:           Number of transmitted bytes
  * @VLinkFailureCount:     Number of virtual link failures
  * @MissDiscAdvCount:      Number of missing FIP discovery advertisement
  */
@@ -241,8 +241,8 @@ struct fcoe_dev_stats {
 	u64		InputRequests;
 	u64		OutputRequests;
 	u64		ControlRequests;
-	u64		InputMegabytes;
-	u64		OutputMegabytes;
+	u64		InputBytes;
+	u64		OutputBytes;
 	u64		VLinkFailureCount;
 	u64		MissDiscAdvCount;
 };
@@ -263,7 +263,6 @@ struct fc_seq_els_data {
  * struct fc_fcp_pkt - FCP request structure (one for each scsi_cmnd request)
  * @lp:              The associated local port
  * @state:           The state of the I/O
- * @tgt_flags:       Target's flags
  * @ref_cnt:         Reference count
  * @scsi_pkt_lock:   Lock to protect the SCSI packet (must be taken before the
  *                   host_lock if both are to be held at the same time)
@@ -298,7 +297,6 @@ struct fc_fcp_pkt {
 	/* Housekeeping information */
 	struct fc_lport   *lp;
 	u16		  state;
-	u16		  tgt_flags;
 	atomic_t	  ref_cnt;
 	spinlock_t	  scsi_pkt_lock;
 
@@ -1006,8 +1004,7 @@ void fc_fcp_destroy(struct fc_lport *);
 /*
  * SCSI INTERACTION LAYER
  *****************************/
-int fc_queuecommand(struct scsi_cmnd *,
-		    void (*done)(struct scsi_cmnd *));
+int fc_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
 int fc_eh_abort(struct scsi_cmnd *);
 int fc_eh_device_reset(struct scsi_cmnd *);
 int fc_eh_host_reset(struct scsi_cmnd *);
diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h
index 06f1b5a8ed1..feb6a94c90e 100644
--- a/include/scsi/libfcoe.h
+++ b/include/scsi/libfcoe.h
@@ -92,10 +92,12 @@ enum fip_state {
  * @timer_work:	   &work_struct for doing keep-alives and resets.
  * @recv_work:	   &work_struct for receiving FIP frames.
  * @fip_recv_list: list of received FIP frames.
+ * @flogi_req:	   clone of FLOGI request sent
  * @rnd_state:	   state for pseudo-random number generator.
  * @port_id:	   proposed or selected local-port ID.
  * @user_mfs:	   configured maximum FC frame size, including FC header.
  * @flogi_oxid:    exchange ID of most recent fabric login.
+ * @flogi_req_send: send of FLOGI requested
  * @flogi_count:   number of FLOGI attempts in AUTO mode.
  * @map_dest:	   use the FC_MAP mode for destination MAC addresses.
  * @spma:	   supports SPMA server-provided MACs mode
@@ -106,6 +108,7 @@ enum fip_state {
  * @update_mac:    LLD-supplied function to handle changes to MAC addresses.
  * @get_src_addr:  LLD-supplied function to supply a source MAC address.
  * @ctlr_mutex:	   lock protecting this structure.
+ * @ctlr_lock:     spinlock covering flogi_req
  *
  * This structure is used by all FCoE drivers.  It contains information
  * needed by all FCoE low-level drivers (LLDs) as well as internal state
@@ -126,12 +129,14 @@ struct fcoe_ctlr {
 	struct work_struct timer_work;
 	struct work_struct recv_work;
 	struct sk_buff_head fip_recv_list;
+	struct sk_buff *flogi_req;
 
 	struct rnd_state rnd_state;
 	u32 port_id;
 
 	u16 user_mfs;
 	u16 flogi_oxid;
+	u8 flogi_req_send;
 	u8 flogi_count;
 	u8 map_dest;
 	u8 spma;
@@ -143,6 +148,7 @@ struct fcoe_ctlr {
 	void (*update_mac)(struct fc_lport *, u8 *addr);
 	u8 * (*get_src_addr)(struct fc_lport *);
 	struct mutex ctlr_mutex;
+	spinlock_t ctlr_lock;
 };
 
 /**
@@ -155,6 +161,7 @@ struct fcoe_ctlr {
  * @fcf_mac:	 Ethernet address of the FCF
  * @vfid:	 virtual fabric ID
  * @pri:	 selection priority, smaller values are better
+ * @flogi_sent:	 current FLOGI sent to this FCF
  * @flags:	 flags received from advertisement
  * @fka_period:	 keep-alive period, in jiffies
  *
@@ -176,6 +183,7 @@ struct fcoe_fcf {
 	u8 fcf_mac[ETH_ALEN];
 
 	u8 pri;
+	u8 flogi_sent;
 	u16 flags;
 	u32 fka_period;
 	u8 fd_flags:1;
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index ae5196aae1a..748382b32b5 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -89,6 +89,7 @@ enum {
 	ISCSI_TASK_RUNNING,
 	ISCSI_TASK_ABRT_TMF,		/* aborted due to TMF */
 	ISCSI_TASK_ABRT_SESS_RECOV,	/* aborted due to session recovery */
+	ISCSI_TASK_REQUEUE_SCSIQ,	/* qcmd requeueing to scsi-ml */
 };
 
 struct iscsi_r2t_info {
@@ -341,8 +342,7 @@ extern int iscsi_eh_abort(struct scsi_cmnd *sc);
 extern int iscsi_eh_recover_target(struct scsi_cmnd *sc);
 extern int iscsi_eh_session_reset(struct scsi_cmnd *sc);
 extern int iscsi_eh_device_reset(struct scsi_cmnd *sc);
-extern int iscsi_queuecommand(struct scsi_cmnd *sc,
-			      void (*done)(struct scsi_cmnd *));
+extern int iscsi_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *sc);
 
 /*
  * iSCSI host helpers.
@@ -420,6 +420,7 @@ extern struct iscsi_task *iscsi_itt_to_ctask(struct iscsi_conn *, itt_t);
 extern struct iscsi_task *iscsi_itt_to_task(struct iscsi_conn *, itt_t);
 extern void iscsi_requeue_task(struct iscsi_task *task);
 extern void iscsi_put_task(struct iscsi_task *task);
+extern void __iscsi_put_task(struct iscsi_task *task);
 extern void __iscsi_get_task(struct iscsi_task *task);
 extern void iscsi_complete_scsi_task(struct iscsi_task *task,
 				     uint32_t exp_cmdsn, uint32_t max_cmdsn);
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 3dec1949f69..8f6bb9c7f3e 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -361,6 +361,8 @@ struct sas_ha_struct {
 	/* The class calls this to send a task for execution. */
 	int lldd_max_execute_num;
 	int lldd_queue_size;
+	int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
+				* their siblings when forming wide ports */
 
 	/* LLDD calls these to notify the class of an event. */
 	void (*notify_ha_event)(struct sas_ha_struct *, enum ha_event);
@@ -621,8 +623,7 @@ int sas_set_phy_speed(struct sas_phy *phy,
 int sas_phy_enable(struct sas_phy *phy, int enabled);
 int sas_phy_reset(struct sas_phy *phy, int hard_reset);
 int sas_queue_up(struct sas_task *task);
-extern int sas_queuecommand(struct scsi_cmnd *,
-		     void (*scsi_done)(struct scsi_cmnd *));
+extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *);
 extern int sas_target_alloc(struct scsi_target *);
 extern int sas_slave_alloc(struct scsi_device *);
 extern int sas_slave_configure(struct scsi_device *);
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index 216af8538cc..1651fef1883 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -115,33 +115,61 @@ struct scsi_cmnd;
 #define PERSISTENT_RESERVE_OUT 0x5f
 #define VARIABLE_LENGTH_CMD   0x7f
 #define REPORT_LUNS           0xa0
+#define SECURITY_PROTOCOL_IN  0xa2
 #define MAINTENANCE_IN        0xa3
 #define MAINTENANCE_OUT       0xa4
 #define MOVE_MEDIUM           0xa5
 #define EXCHANGE_MEDIUM       0xa6
 #define READ_12               0xa8
 #define WRITE_12              0xaa
+#define READ_MEDIA_SERIAL_NUMBER 0xab
 #define WRITE_VERIFY_12       0xae
 #define VERIFY_12	      0xaf
 #define SEARCH_HIGH_12        0xb0
 #define SEARCH_EQUAL_12       0xb1
 #define SEARCH_LOW_12         0xb2
+#define SECURITY_PROTOCOL_OUT 0xb5
 #define READ_ELEMENT_STATUS   0xb8
 #define SEND_VOLUME_TAG       0xb6
 #define WRITE_LONG_2          0xea
+#define EXTENDED_COPY         0x83
+#define RECEIVE_COPY_RESULTS  0x84
+#define ACCESS_CONTROL_IN     0x86
+#define ACCESS_CONTROL_OUT    0x87
 #define READ_16               0x88
 #define WRITE_16              0x8a
+#define READ_ATTRIBUTE        0x8c
+#define WRITE_ATTRIBUTE	      0x8d
 #define VERIFY_16	      0x8f
 #define WRITE_SAME_16	      0x93
 #define SERVICE_ACTION_IN     0x9e
 /* values for service action in */
 #define	SAI_READ_CAPACITY_16  0x10
 #define SAI_GET_LBA_STATUS    0x12
+/* values for VARIABLE_LENGTH_CMD service action codes
+ * see spc4r17 Section D.3.5, table D.7 and D.8 */
+#define VLC_SA_RECEIVE_CREDENTIAL 0x1800
 /* values for maintenance in */
+#define MI_REPORT_IDENTIFYING_INFORMATION 0x05
 #define MI_REPORT_TARGET_PGS  0x0a
+#define MI_REPORT_ALIASES     0x0b
+#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
+#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
+#define MI_REPORT_PRIORITY   0x0e
+#define MI_REPORT_TIMESTAMP  0x0f
+#define MI_MANAGEMENT_PROTOCOL_IN 0x10
 /* values for maintenance out */
+#define MO_SET_IDENTIFYING_INFORMATION 0x06
 #define MO_SET_TARGET_PGS     0x0a
+#define MO_CHANGE_ALIASES     0x0b
+#define MO_SET_PRIORITY       0x0e
+#define MO_SET_TIMESTAMP      0x0f
+#define MO_MANAGEMENT_PROTOCOL_OUT 0x10
 /* values for variable length command */
+#define XDREAD_32	      0x03
+#define XDWRITE_32	      0x04
+#define XPWRITE_32	      0x06
+#define XDWRITEREAD_32	      0x07
 #define READ_32		      0x09
 #define VERIFY_32	      0x0a
 #define WRITE_32	      0x0b
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index d0a6a845f20..e7e385842a3 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -127,8 +127,7 @@ struct scsi_host_template {
 	 *
 	 * STATUS: REQUIRED
 	 */
-	int (* queuecommand)(struct scsi_cmnd *,
-			     void (*done)(struct scsi_cmnd *));
+	int (* queuecommand)(struct Scsi_Host *, struct scsi_cmnd *);
 
 	/*
 	 * The transfer functions are used to queue a scsi command to
@@ -505,6 +504,25 @@ struct scsi_host_template {
 };
 
 /*
+ * Temporary #define for host lock push down. Can be removed when all
+ * drivers have been updated to take advantage of unlocked
+ * queuecommand.
+ *
+ */
+#define DEF_SCSI_QCMD(func_name) \
+	int func_name(struct Scsi_Host *shost, struct scsi_cmnd *cmd)	\
+	{								\
+		unsigned long irq_flags;				\
+		int rc;							\
+		spin_lock_irqsave(shost->host_lock, irq_flags);		\
+		scsi_cmd_get_serial(shost, cmd);			\
+		rc = func_name##_lck (cmd, cmd->scsi_done);			\
+		spin_unlock_irqrestore(shost->host_lock, irq_flags);	\
+		return rc;						\
+	}
+
+
+/*
  * shost state: If you alter this, you also need to alter scsi_sysfs.c
  * (for the ascii descriptions) and the state model enforcer:
  * scsi_host_set_state()
@@ -752,6 +770,7 @@ extern struct Scsi_Host *scsi_host_get(struct Scsi_Host *);
 extern void scsi_host_put(struct Scsi_Host *t);
 extern struct Scsi_Host *scsi_host_lookup(unsigned short);
 extern const char *scsi_host_state_name(enum scsi_host_state);
+extern void scsi_cmd_get_serial(struct Scsi_Host *, struct scsi_cmnd *);
 
 extern u64 scsi_calculate_bounce_limit(struct Scsi_Host *);
 
diff --git a/include/sound/sh_fsi.h b/include/sound/sh_fsi.h
index fa60cbda90a..d79894192ae 100644
--- a/include/sound/sh_fsi.h
+++ b/include/sound/sh_fsi.h
@@ -85,7 +85,9 @@
  *     ACK_MD (FSI2)
  *     CKG1   (FSI)
  *
- * err:  return value < 0
+ * err		: return value <  0
+ * no change	: return value == 0
+ * change xMD	: return value >  0
  *
  * 0x-00000AB
  *
@@ -111,7 +113,7 @@
 struct sh_fsi_platform_info {
 	unsigned long porta_flags;
 	unsigned long portb_flags;
-	int (*set_rate)(int is_porta, int rate); /* for master mode */
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 };
 
 #endif /* __SOUND_FSI_H */
diff --git a/include/trace/define_trace.h b/include/trace/define_trace.h
index 1dfab540151..b0b4eb24d59 100644
--- a/include/trace/define_trace.h
+++ b/include/trace/define_trace.h
@@ -26,6 +26,15 @@
 #define TRACE_EVENT(name, proto, args, tstruct, assign, print)	\
 	DEFINE_TRACE(name)
 
+#undef TRACE_EVENT_CONDITION
+#define TRACE_EVENT_CONDITION(name, proto, args, cond, tstruct, assign, print) \
+	TRACE_EVENT(name,						\
+		PARAMS(proto),						\
+		PARAMS(args),						\
+		PARAMS(tstruct),					\
+		PARAMS(assign),						\
+		PARAMS(print))
+
 #undef TRACE_EVENT_FN
 #define TRACE_EVENT_FN(name, proto, args, tstruct,		\
 		assign, print, reg, unreg)			\
@@ -39,6 +48,10 @@
 #define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
 	DEFINE_TRACE(name)
 
+#undef DEFINE_EVENT_CONDITION
+#define DEFINE_EVENT_CONDITION(template, name, proto, args, cond) \
+	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
+
 #undef DECLARE_TRACE
 #define DECLARE_TRACE(name, proto, args)	\
 	DEFINE_TRACE(name)
@@ -75,9 +88,11 @@
 
 #undef TRACE_EVENT
 #undef TRACE_EVENT_FN
+#undef TRACE_EVENT_CONDITION
 #undef DECLARE_EVENT_CLASS
 #undef DEFINE_EVENT
 #undef DEFINE_EVENT_PRINT
+#undef DEFINE_EVENT_CONDITION
 #undef TRACE_HEADER_MULTI_READ
 #undef DECLARE_TRACE
 
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index 286784d69b8..1bcc2a8c00e 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h
@@ -7,16 +7,67 @@
 #include <linux/ktime.h>
 #include <linux/tracepoint.h>
 
-#ifndef _TRACE_POWER_ENUM_
-#define _TRACE_POWER_ENUM_
-enum {
-	POWER_NONE	= 0,
-	POWER_CSTATE	= 1,	/* C-State */
-	POWER_PSTATE	= 2,	/* Fequency change or DVFS */
-	POWER_SSTATE	= 3,	/* Suspend */
-};
+DECLARE_EVENT_CLASS(cpu,
+
+	TP_PROTO(unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(state, cpu_id),
+
+	TP_STRUCT__entry(
+		__field(	u32,		state		)
+		__field(	u32,		cpu_id		)
+	),
+
+	TP_fast_assign(
+		__entry->state = state;
+		__entry->cpu_id = cpu_id;
+	),
+
+	TP_printk("state=%lu cpu_id=%lu", (unsigned long)__entry->state,
+		  (unsigned long)__entry->cpu_id)
+);
+
+DEFINE_EVENT(cpu, cpu_idle,
+
+	TP_PROTO(unsigned int state, unsigned int cpu_id),
+
+	TP_ARGS(state, cpu_id)
+);
+
+/* This file can get included multiple times, TRACE_HEADER_MULTI_READ at top */
+#ifndef _PWR_EVENT_AVOID_DOUBLE_DEFINING
+#define _PWR_EVENT_AVOID_DOUBLE_DEFINING
+
+#define PWR_EVENT_EXIT -1
 #endif
 
+DEFINE_EVENT(cpu, cpu_frequency,
+
+	TP_PROTO(unsigned int frequency, unsigned int cpu_id),
+
+	TP_ARGS(frequency, cpu_id)
+);
+
+TRACE_EVENT(machine_suspend,
+
+	TP_PROTO(unsigned int state),
+
+	TP_ARGS(state),
+
+	TP_STRUCT__entry(
+		__field(	u32,		state		)
+	),
+
+	TP_fast_assign(
+		__entry->state = state;
+	),
+
+	TP_printk("state=%lu", (unsigned long)__entry->state)
+);
+
+/* This code will be removed after deprecation time exceeded (2.6.41) */
+#ifdef CONFIG_EVENT_POWER_TRACING_DEPRECATED
+
 /*
  * The power events are used for cpuidle & suspend (power_start, power_end)
  *  and for cpufreq (power_frequency)
@@ -75,6 +126,36 @@ TRACE_EVENT(power_end,
 
 );
 
+/* Deprecated dummy functions must be protected against multi-declartion */
+#ifndef _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
+#define _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
+
+enum {
+	POWER_NONE = 0,
+	POWER_CSTATE = 1,
+	POWER_PSTATE = 2,
+};
+#endif /* _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED */
+
+#else /* CONFIG_EVENT_POWER_TRACING_DEPRECATED */
+
+#ifndef _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
+#define _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED
+enum {
+       POWER_NONE = 0,
+       POWER_CSTATE = 1,
+       POWER_PSTATE = 2,
+};
+
+/* These dummy declaration have to be ripped out when the deprecated
+   events get removed */
+static inline void trace_power_start(u64 type, u64 state, u64 cpuid) {};
+static inline void trace_power_end(u64 cpuid) {};
+static inline void trace_power_frequency(u64 type, u64 state, u64 cpuid) {};
+#endif /* _PWR_EVENT_AVOID_DOUBLE_DEFINING_DEPRECATED */
+
+#endif /* CONFIG_EVENT_POWER_TRACING_DEPRECATED */
+
 /*
  * The clock events are used for clock enable/disable and for
  *  clock rate change
@@ -153,7 +234,6 @@ DEFINE_EVENT(power_domain, power_domain_target,
 
 	TP_ARGS(name, state, cpu_id)
 );
-
 #endif /* _TRACE_POWER_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/syscalls.h b/include/trace/events/syscalls.h
index fb726ac7cae..5a4c04a75b3 100644
--- a/include/trace/events/syscalls.h
+++ b/include/trace/events/syscalls.h
@@ -40,6 +40,8 @@ TRACE_EVENT_FN(sys_enter,
 	syscall_regfunc, syscall_unregfunc
 );
 
+TRACE_EVENT_FLAGS(sys_enter, TRACE_EVENT_FL_CAP_ANY)
+
 TRACE_EVENT_FN(sys_exit,
 
 	TP_PROTO(struct pt_regs *regs, long ret),
@@ -62,6 +64,8 @@ TRACE_EVENT_FN(sys_exit,
 	syscall_regfunc, syscall_unregfunc
 );
 
+TRACE_EVENT_FLAGS(sys_exit, TRACE_EVENT_FL_CAP_ANY)
+
 #endif /* CONFIG_HAVE_SYSCALL_TRACEPOINTS */
 
 #endif /* _TRACE_EVENTS_SYSCALLS_H */
diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h
index a9377c0083a..e16610c208c 100644
--- a/include/trace/ftrace.h
+++ b/include/trace/ftrace.h
@@ -82,6 +82,10 @@
 	TRACE_EVENT(name, PARAMS(proto), PARAMS(args),			\
 		PARAMS(tstruct), PARAMS(assign), PARAMS(print))		\
 
+#undef TRACE_EVENT_FLAGS
+#define TRACE_EVENT_FLAGS(name, value)					\
+	__TRACE_EVENT_FLAGS(name, value)
+
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
 
@@ -129,6 +133,9 @@
 #define DEFINE_EVENT_PRINT(template, name, proto, args, print)	\
 	DEFINE_EVENT(template, name, PARAMS(proto), PARAMS(args))
 
+#undef TRACE_EVENT_FLAGS
+#define TRACE_EVENT_FLAGS(event, flag)
+
 #include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
 
 /*
@@ -289,13 +296,19 @@ static struct trace_event_functions ftrace_event_type_funcs_##call = {	\
 
 #undef __array
 #define __array(type, item, len)					\
-	BUILD_BUG_ON(len > MAX_FILTER_STR_VAL);				\
-	ret = trace_define_field(event_call, #type "[" #len "]", #item,	\
+	do {								\
+		mutex_lock(&event_storage_mutex);			\
+		BUILD_BUG_ON(len > MAX_FILTER_STR_VAL);			\
+		snprintf(event_storage, sizeof(event_storage),		\
+			 "%s[%d]", #type, len);				\
+		ret = trace_define_field(event_call, event_storage, #item, \
 				 offsetof(typeof(field), item),		\
 				 sizeof(field.item),			\
 				 is_signed_type(type), FILTER_OTHER);	\
-	if (ret)							\
-		return ret;
+		mutex_unlock(&event_storage_mutex);			\
+		if (ret)						\
+			return ret;					\
+	} while (0);
 
 #undef __dynamic_array
 #define __dynamic_array(type, item, len)				       \
diff --git a/include/video/da8xx-fb.h b/include/video/da8xx-fb.h
index 6316cdabf73..89d43b3d4cb 100644
--- a/include/video/da8xx-fb.h
+++ b/include/video/da8xx-fb.h
@@ -99,7 +99,6 @@ struct lcd_sync_arg {
 #define FBIPUT_COLOR		_IOW('F', 6, int)
 #define FBIPUT_HSYNC		_IOW('F', 9, int)
 #define FBIPUT_VSYNC		_IOW('F', 10, int)
-#define FBIO_WAITFORVSYNC	_IOW('F', 0x20, u_int32_t)
 
 #endif  /* ifndef DA8XX_FB_H */
 
diff --git a/include/video/s1d13xxxfb.h b/include/video/s1d13xxxfb.h
index f0736cff2ca..55f534491a3 100644
--- a/include/video/s1d13xxxfb.h
+++ b/include/video/s1d13xxxfb.h
@@ -136,12 +136,6 @@
 #define S1DREG_DELAYOFF			0xFFFE
 #define S1DREG_DELAYON			0xFFFF
 
-#define BBLT_FIFO_EMPTY			0x00
-#define BBLT_FIFO_NOT_EMPTY		0x40
-#define BBLT_FIFO_NOT_FULL		0x30
-#define BBLT_FIFO_HALF_FULL		0x20
-#define BBLT_FIFO_FULL			0x10
-
 #define BBLT_SOLID_FILL			0x0c
 
 
diff --git a/include/video/sh_mipi_dsi.h b/include/video/sh_mipi_dsi.h
index 18bca08f9f5..6cb95c977de 100644
--- a/include/video/sh_mipi_dsi.h
+++ b/include/video/sh_mipi_dsi.h
@@ -27,9 +27,15 @@ enum sh_mipi_dsi_data_fmt {
 
 struct sh_mobile_lcdc_chan_cfg;
 
+#define SH_MIPI_DSI_HSABM	(1 << 0)
+#define SH_MIPI_DSI_HSPBM	(1 << 1)
+
 struct sh_mipi_dsi_info {
 	enum sh_mipi_dsi_data_fmt	data_format;
 	struct sh_mobile_lcdc_chan_cfg	*lcd_chan;
+	unsigned long			flags;
+	u32				clksrc;
+	unsigned int			vsynw_offset;
 };
 
 #endif
diff --git a/include/video/sh_mobile_hdmi.h b/include/video/sh_mobile_hdmi.h
index 1e1aa54ab2e..b56932927d0 100644
--- a/include/video/sh_mobile_hdmi.h
+++ b/include/video/sh_mobile_hdmi.h
@@ -13,6 +13,7 @@
 
 struct sh_mobile_lcdc_chan_cfg;
 struct device;
+struct clk;
 
 /*
  * flags format
@@ -33,6 +34,8 @@ struct sh_mobile_hdmi_info {
 	struct sh_mobile_lcdc_chan_cfg	*lcd_chan;
 	struct device			*lcd_dev;
 	unsigned int			 flags;
+	long (*clk_optimize_parent)(unsigned long target, unsigned long *best_freq,
+				    unsigned long *parent_freq);
 };
 
 #endif
diff --git a/drivers/staging/udlfb/udlfb.h b/include/video/udlfb.h
index 6f9785e9d62..69d485a4a02 100644
--- a/drivers/staging/udlfb/udlfb.h
+++ b/include/video/udlfb.h
@@ -65,9 +65,6 @@ struct dlfb_data {
 #define MAX_TRANSFER (PAGE_SIZE*16 - BULK_SIZE)
 #define WRITES_IN_FLIGHT (4)
 
-#define MIN_EDID_SIZE 128
-#define MAX_EDID_SIZE 128
-
 #define MAX_VENDOR_DESCRIPTOR_SIZE 256
 
 #define GET_URB_TIMEOUT	HZ
@@ -95,23 +92,4 @@ struct dlfb_data {
 #define DL_ALIGN_UP(x, a) ALIGN(x, a)
 #define DL_ALIGN_DOWN(x, a) ALIGN(x-(a-1), a)
 
-/* remove once this gets added to sysfs.h */
-#define __ATTR_RW(attr) __ATTR(attr, 0644, attr##_show, attr##_store)
-
-/*
- * udlfb is both a usb device, and a framebuffer device.
- * They may exist at the same time, but during various stages
- * inactivity, teardown, or "virtual" operation, only one or the
- * other will exist (one will outlive the other).  So we can't
- * call the dev_*() macros, because we don't have a stable dev object.
- */
-#define dl_err(format, arg...) \
-	pr_err("udlfb: " format, ## arg)
-#define dl_warn(format, arg...) \
-	pr_warning("udlfb: " format, ## arg)
-#define dl_notice(format, arg...) \
-	pr_notice("udlfb: " format, ## arg)
-#define dl_info(format, arg...) \
-	pr_info("udlfb: " format, ## arg)
-
 #endif
diff --git a/include/xen/events.h b/include/xen/events.h
index 646dd17d3aa..00f53ddcc06 100644
--- a/include/xen/events.h
+++ b/include/xen/events.h
@@ -76,7 +76,9 @@ int xen_map_pirq_gsi(unsigned pirq, unsigned gsi, int shareable, char *name);
 
 #ifdef CONFIG_PCI_MSI
 /* Allocate an irq and a pirq to be used with MSIs. */
-void xen_allocate_pirq_msi(char *name, int *irq, int *pirq);
+#define XEN_ALLOC_PIRQ (1 << 0)
+#define XEN_ALLOC_IRQ  (1 << 1)
+void xen_allocate_pirq_msi(char *name, int *irq, int *pirq, int alloc_mask);
 int xen_create_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int type);
 #endif
 
@@ -89,4 +91,7 @@ int xen_vector_from_irq(unsigned pirq);
 /* Return gsi allocated to pirq */
 int xen_gsi_from_irq(unsigned pirq);
 
+/* Return irq from pirq */
+int xen_irq_from_pirq(unsigned pirq);
+
 #endif	/* _XEN_EVENTS_H */
diff --git a/include/xen/interface/io/ring.h b/include/xen/interface/io/ring.h
index e8cbf431c8c..75271b9a8f6 100644
--- a/include/xen/interface/io/ring.h
+++ b/include/xen/interface/io/ring.h
@@ -24,8 +24,15 @@ typedef unsigned int RING_IDX;
  * A ring contains as many entries as will fit, rounded down to the nearest
  * power of two (so we can mask with (size-1) to loop around).
  */
-#define __RING_SIZE(_s, _sz) \
-    (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+#define __CONST_RING_SIZE(_s, _sz)				\
+	(__RD32(((_sz) - offsetof(struct _s##_sring, ring)) /	\
+		sizeof(((struct _s##_sring *)0)->ring[0])))
+
+/*
+ * The same for passing in an actual pointer instead of a name tag.
+ */
+#define __RING_SIZE(_s, _sz)						\
+	(__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
 
 /*
  * Macros to make the correct C datatypes for a new kind of ring.
diff --git a/include/xen/interface/memory.h b/include/xen/interface/memory.h
index d7a6c13bde6..eac3ce15371 100644
--- a/include/xen/interface/memory.h
+++ b/include/xen/interface/memory.h
@@ -141,6 +141,19 @@ struct xen_machphys_mfn_list {
 DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mfn_list);
 
 /*
+ * Returns the location in virtual address space of the machine_to_phys
+ * mapping table. Architectures which do not have a m2p table, or which do not
+ * map it by default into guest address space, do not implement this command.
+ * arg == addr of xen_machphys_mapping_t.
+ */
+#define XENMEM_machphys_mapping     12
+struct xen_machphys_mapping {
+    unsigned long v_start, v_end; /* Start and end virtual addresses.   */
+    unsigned long max_mfn;        /* Maximum MFN that can be looked up. */
+};
+DEFINE_GUEST_HANDLE_STRUCT(xen_machphys_mapping_t);
+
+/*
  * Sets the GPFN at which a particular page appears in the specified guest's
  * pseudophysical address space.
  * arg == addr of xen_add_to_physmap_t.
diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h
index 2b2c66c3df0..534cac89a77 100644
--- a/include/xen/interface/physdev.h
+++ b/include/xen/interface/physdev.h
@@ -188,6 +188,16 @@ struct physdev_nr_pirqs {
     uint32_t nr_pirqs;
 };
 
+/* type is MAP_PIRQ_TYPE_GSI or MAP_PIRQ_TYPE_MSI
+ * the hypercall returns a free pirq */
+#define PHYSDEVOP_get_free_pirq    23
+struct physdev_get_free_pirq {
+    /* IN */ 
+    int type;
+    /* OUT */
+    uint32_t pirq;
+};
+
 /*
  * Notify that some PIRQ-bound event channels have been unmasked.
  * ** This command is obsolete since interface version 0x00030202 and is **
diff --git a/include/xen/page.h b/include/xen/page.h
index eaf85fab126..0be36b976f4 100644
--- a/include/xen/page.h
+++ b/include/xen/page.h
@@ -1 +1,8 @@
+#ifndef _XEN_PAGE_H
+#define _XEN_PAGE_H
+
 #include <asm/xen/page.h>
+
+extern phys_addr_t xen_extra_mem_start, xen_extra_mem_size;
+
+#endif	/* _XEN_PAGE_H */
diff --git a/include/xen/privcmd.h b/include/xen/privcmd.h
index b42cdfd92fe..17857fb4d55 100644
--- a/include/xen/privcmd.h
+++ b/include/xen/privcmd.h
@@ -34,13 +34,10 @@
 #define __LINUX_PUBLIC_PRIVCMD_H__
 
 #include <linux/types.h>
+#include <linux/compiler.h>
 
 typedef unsigned long xen_pfn_t;
 
-#ifndef __user
-#define __user
-#endif
-
 struct privcmd_hypercall {
 	__u64 op;
 	__u64 arg[5];
diff --git a/init/Kconfig b/init/Kconfig
index 88c10468db4..8dfd094e687 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -393,7 +393,6 @@ config PREEMPT_RCU
 
 config RCU_TRACE
 	bool "Enable tracing for RCU"
-	depends on TREE_RCU || TREE_PREEMPT_RCU
 	help
 	  This option provides tracing in RCU which presents stats
 	  in debugfs for debugging RCU implementation.
@@ -459,6 +458,60 @@ config TREE_RCU_TRACE
 	  TREE_PREEMPT_RCU implementations, permitting Makefile to
 	  trivially select kernel/rcutree_trace.c.
 
+config RCU_BOOST
+	bool "Enable RCU priority boosting"
+	depends on RT_MUTEXES && TINY_PREEMPT_RCU
+	default n
+	help
+	  This option boosts the priority of preempted RCU readers that
+	  block the current preemptible RCU grace period for too long.
+	  This option also prevents heavy loads from blocking RCU
+	  callback invocation for all flavors of RCU.
+
+	  Say Y here if you are working with real-time apps or heavy loads
+	  Say N here if you are unsure.
+
+config RCU_BOOST_PRIO
+	int "Real-time priority to boost RCU readers to"
+	range 1 99
+	depends on RCU_BOOST
+	default 1
+	help
+	  This option specifies the real-time priority to which preempted
+	  RCU readers are to be boosted.  If you are working with CPU-bound
+	  real-time applications, you should specify a priority higher then
+	  the highest-priority CPU-bound application.
+
+	  Specify the real-time priority, or take the default if unsure.
+
+config RCU_BOOST_DELAY
+	int "Milliseconds to delay boosting after RCU grace-period start"
+	range 0 3000
+	depends on RCU_BOOST
+	default 500
+	help
+	  This option specifies the time to wait after the beginning of
+	  a given grace period before priority-boosting preempted RCU
+	  readers blocking that grace period.  Note that any RCU reader
+	  blocking an expedited RCU grace period is boosted immediately.
+
+	  Accept the default if unsure.
+
+config SRCU_SYNCHRONIZE_DELAY
+	int "Microseconds to delay before waiting for readers"
+	range 0 20
+	default 10
+	help
+	  This option controls how long SRCU delays before entering its
+	  loop waiting on SRCU readers.  The purpose of this loop is
+	  to avoid the unconditional context-switch penalty that would
+	  otherwise be incurred if there was an active SRCU reader,
+	  in a manner similar to adaptive locking schemes.  This should
+	  be set to be a bit longer than the common-case SRCU read-side
+	  critical-section overhead.
+
+	  Accept the default if unsure.
+
 endmenu # "RCU Subsystem"
 
 config IKCONFIG
@@ -613,6 +666,19 @@ config CGROUP_MEM_RES_CTLR_SWAP
 	  if boot option "noswapaccount" is set, swap will not be accounted.
 	  Now, memory usage of swap_cgroup is 2 bytes per entry. If swap page
 	  size is 4096bytes, 512k per 1Gbytes of swap.
+config CGROUP_MEM_RES_CTLR_SWAP_ENABLED
+	bool "Memory Resource Controller Swap Extension enabled by default"
+	depends on CGROUP_MEM_RES_CTLR_SWAP
+	default y
+	help
+	  Memory Resource Controller Swap Extension comes with its price in
+	  a bigger memory consumption. General purpose distribution kernels
+	  which want to enable the feautre but keep it disabled by default
+	  and let the user enable it by swapaccount boot command line
+	  parameter should have this option unselected.
+	  For those who want to have the feature enabled by default should
+	  select this option (if, for some reason, they need to disable it
+	  then noswapaccount does the trick).
 
 menuconfig CGROUP_SCHED
 	bool "Group CPU scheduler"
@@ -728,6 +794,19 @@ config NET_NS
 
 endif # NAMESPACES
 
+config SCHED_AUTOGROUP
+	bool "Automatic process group scheduling"
+	select EVENTFD
+	select CGROUPS
+	select CGROUP_SCHED
+	select FAIR_GROUP_SCHED
+	help
+	  This option optimizes the scheduler for common desktop workloads by
+	  automatically creating and populating task groups.  This separation
+	  of workloads isolates aggressive CPU burners (like build jobs) from
+	  desktop applications.  Task group autogeneration is currently based
+	  upon task session.
+
 config MM_OWNER
 	bool
 
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 830aaec9c7d..2b54bef33b5 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -93,7 +93,7 @@ no_match:
  *
  * Returns the matching dev_t on success or 0 on failure.
  */
-static dev_t __init devt_from_partuuid(char *uuid_str)
+static dev_t devt_from_partuuid(char *uuid_str)
 {
 	dev_t res = 0;
 	struct device *dev = NULL;
diff --git a/init/main.c b/init/main.c
index e59af24a0b7..00799c1d462 100644
--- a/init/main.c
+++ b/init/main.c
@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
-#include <linux/smp_lock.h>
 #include <linux/initrd.h>
 #include <linux/bootmem.h>
 #include <linux/acpi.h>
@@ -68,6 +67,7 @@
 #include <linux/sfi.h>
 #include <linux/shmem_fs.h>
 #include <linux/slab.h>
+#include <linux/perf_event.h>
 
 #include <asm/io.h>
 #include <asm/bugs.h>
@@ -604,6 +604,8 @@ asmlinkage void __init start_kernel(void)
 				"enabled *very* early, fixing it\n");
 		local_irq_disable();
 	}
+	idr_init_cache();
+	perf_event_init();
 	rcu_init();
 	radix_tree_init();
 	/* init some links before init_ISA_irqs() */
@@ -659,7 +661,6 @@ asmlinkage void __init start_kernel(void)
 	enable_debug_pagealloc();
 	kmemleak_init();
 	debug_objects_mem_init();
-	idr_init_cache();
 	setup_per_cpu_pageset();
 	numa_policy_init();
 	if (late_time_init)
@@ -776,9 +777,6 @@ static void __init do_initcalls(void)
 
 	for (fn = __early_initcall_end; fn < __initcall_end; fn++)
 		do_one_initcall(*fn);
-
-	/* Make sure there is no pending stuff from the initcall sequence */
-	flush_scheduled_work();
 }
 
 /*
@@ -883,6 +881,7 @@ static int __init kernel_init(void * unused)
 	smp_prepare_cpus(setup_max_cpus);
 
 	do_pre_smp_initcalls();
+	lockup_detector_init();
 
 	smp_init();
 	sched_init_smp();
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 035f4399edb..14fb6d67e6a 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -237,11 +237,18 @@ static struct inode *mqueue_alloc_inode(struct super_block *sb)
 	return &ei->vfs_inode;
 }
 
-static void mqueue_destroy_inode(struct inode *inode)
+static void mqueue_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(mqueue_inode_cachep, MQUEUE_I(inode));
 }
 
+static void mqueue_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, mqueue_i_callback);
+}
+
 static void mqueue_evict_inode(struct inode *inode)
 {
 	struct mqueue_inode_info *info;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 66a416b42c1..51cddc11cd8 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -763,6 +763,8 @@ EXPORT_SYMBOL_GPL(cgroup_unlock);
  * -> cgroup_mkdir.
  */
 
+static struct dentry *cgroup_lookup(struct inode *dir,
+			struct dentry *dentry, struct nameidata *nd);
 static int cgroup_mkdir(struct inode *dir, struct dentry *dentry, int mode);
 static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry);
 static int cgroup_populate_dir(struct cgroup *cgrp);
@@ -874,25 +876,29 @@ static void cgroup_clear_directory(struct dentry *dentry)
 	struct list_head *node;
 
 	BUG_ON(!mutex_is_locked(&dentry->d_inode->i_mutex));
-	spin_lock(&dcache_lock);
+	spin_lock(&dentry->d_lock);
 	node = dentry->d_subdirs.next;
 	while (node != &dentry->d_subdirs) {
 		struct dentry *d = list_entry(node, struct dentry, d_u.d_child);
+
+		spin_lock_nested(&d->d_lock, DENTRY_D_LOCK_NESTED);
 		list_del_init(node);
 		if (d->d_inode) {
 			/* This should never be called on a cgroup
 			 * directory with child cgroups */
 			BUG_ON(d->d_inode->i_mode & S_IFDIR);
-			d = dget_locked(d);
-			spin_unlock(&dcache_lock);
+			dget_dlock(d);
+			spin_unlock(&d->d_lock);
+			spin_unlock(&dentry->d_lock);
 			d_delete(d);
 			simple_unlink(dentry->d_inode, d);
 			dput(d);
-			spin_lock(&dcache_lock);
-		}
+			spin_lock(&dentry->d_lock);
+		} else
+			spin_unlock(&d->d_lock);
 		node = dentry->d_subdirs.next;
 	}
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dentry->d_lock);
 }
 
 /*
@@ -900,11 +906,16 @@ static void cgroup_clear_directory(struct dentry *dentry)
  */
 static void cgroup_d_remove_dir(struct dentry *dentry)
 {
+	struct dentry *parent;
+
 	cgroup_clear_directory(dentry);
 
-	spin_lock(&dcache_lock);
+	parent = dentry->d_parent;
+	spin_lock(&parent->d_lock);
+	spin_lock(&dentry->d_lock);
 	list_del_init(&dentry->d_u.d_child);
-	spin_unlock(&dcache_lock);
+	spin_unlock(&dentry->d_lock);
+	spin_unlock(&parent->d_lock);
 	remove_dir(dentry);
 }
 
@@ -2180,7 +2191,7 @@ static const struct file_operations cgroup_file_operations = {
 };
 
 static const struct inode_operations cgroup_dir_inode_operations = {
-	.lookup = simple_lookup,
+	.lookup = cgroup_lookup,
 	.mkdir = cgroup_mkdir,
 	.rmdir = cgroup_rmdir,
 	.rename = cgroup_rename,
@@ -2196,13 +2207,29 @@ static inline struct cftype *__file_cft(struct file *file)
 	return __d_cft(file->f_dentry);
 }
 
-static int cgroup_create_file(struct dentry *dentry, mode_t mode,
-				struct super_block *sb)
+static int cgroup_delete_dentry(const struct dentry *dentry)
+{
+	return 1;
+}
+
+static struct dentry *cgroup_lookup(struct inode *dir,
+			struct dentry *dentry, struct nameidata *nd)
 {
-	static const struct dentry_operations cgroup_dops = {
+	static const struct dentry_operations cgroup_dentry_operations = {
+		.d_delete = cgroup_delete_dentry,
 		.d_iput = cgroup_diput,
 	};
 
+	if (dentry->d_name.len > NAME_MAX)
+		return ERR_PTR(-ENAMETOOLONG);
+	d_set_d_op(dentry, &cgroup_dentry_operations);
+	d_add(dentry, NULL);
+	return NULL;
+}
+
+static int cgroup_create_file(struct dentry *dentry, mode_t mode,
+				struct super_block *sb)
+{
 	struct inode *inode;
 
 	if (!dentry)
@@ -2228,7 +2255,6 @@ static int cgroup_create_file(struct dentry *dentry, mode_t mode,
 		inode->i_size = 0;
 		inode->i_fop = &cgroup_file_operations;
 	}
-	dentry->d_op = &cgroup_dops;
 	d_instantiate(dentry, inode);
 	dget(dentry);	/* Extra count - pin the dentry in core */
 	return 0;
@@ -3638,9 +3664,7 @@ again:
 	list_del(&cgrp->sibling);
 	cgroup_unlock_hierarchy(cgrp->root);
 
-	spin_lock(&cgrp->dentry->d_lock);
 	d = dget(cgrp->dentry);
-	spin_unlock(&d->d_lock);
 
 	cgroup_d_remove_dir(d);
 	dput(d);
diff --git a/kernel/cpu.c b/kernel/cpu.c
index f6e726f1849..156cc555614 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -189,7 +189,6 @@ static inline void check_for_tasks(int cpu)
 }
 
 struct take_cpu_down_param {
-	struct task_struct *caller;
 	unsigned long mod;
 	void *hcpu;
 };
@@ -198,7 +197,6 @@ struct take_cpu_down_param {
 static int __ref take_cpu_down(void *_param)
 {
 	struct take_cpu_down_param *param = _param;
-	unsigned int cpu = (unsigned long)param->hcpu;
 	int err;
 
 	/* Ensure this CPU doesn't handle any more interrupts. */
@@ -208,11 +206,6 @@ static int __ref take_cpu_down(void *_param)
 
 	cpu_notify(CPU_DYING | param->mod, param->hcpu);
 
-	if (task_cpu(param->caller) == cpu)
-		move_task_off_dead_cpu(cpu, param->caller);
-	/* Force idle task to run as soon as we yield: it should
-	   immediately notice cpu is offline and die quickly. */
-	sched_idle_next();
 	return 0;
 }
 
@@ -223,7 +216,6 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen)
 	void *hcpu = (void *)(long)cpu;
 	unsigned long mod = tasks_frozen ? CPU_TASKS_FROZEN : 0;
 	struct take_cpu_down_param tcd_param = {
-		.caller = current,
 		.mod = mod,
 		.hcpu = hcpu,
 	};
@@ -253,9 +245,15 @@ static int __ref _cpu_down(unsigned int cpu, int tasks_frozen)
 	}
 	BUG_ON(cpu_online(cpu));
 
-	/* Wait for it to sleep (leaving idle task). */
+	/*
+	 * The migration_call() CPU_DYING callback will have removed all
+	 * runnable tasks from the cpu, there's only the idle task left now
+	 * that the migration thread is done doing the stop_machine thing.
+	 *
+	 * Wait for the stop thread to go away.
+	 */
 	while (!idle_cpu(cpu))
-		yield();
+		cpu_relax();
 
 	/* This actually kills the CPU. */
 	__cpu_die(cpu);
@@ -386,6 +384,14 @@ out:
 #ifdef CONFIG_PM_SLEEP_SMP
 static cpumask_var_t frozen_cpus;
 
+void __weak arch_disable_nonboot_cpus_begin(void)
+{
+}
+
+void __weak arch_disable_nonboot_cpus_end(void)
+{
+}
+
 int disable_nonboot_cpus(void)
 {
 	int cpu, first_cpu, error = 0;
@@ -397,6 +403,7 @@ int disable_nonboot_cpus(void)
 	 * with the userspace trying to use the CPU hotplug at the same time
 	 */
 	cpumask_clear(frozen_cpus);
+	arch_disable_nonboot_cpus_begin();
 
 	printk("Disabling non-boot CPUs ...\n");
 	for_each_online_cpu(cpu) {
@@ -412,6 +419,8 @@ int disable_nonboot_cpus(void)
 		}
 	}
 
+	arch_disable_nonboot_cpus_end();
+
 	if (!error) {
 		BUG_ON(num_online_cpus() > 1);
 		/* Make sure the CPUs won't be enabled by someone else */
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index 37755d62192..a6e72976682 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -82,7 +82,7 @@ static kdbtab_t kdb_base_commands[50];
 #define for_each_kdbcmd(cmd, num)					\
 	for ((cmd) = kdb_base_commands, (num) = 0;			\
 	     num < kdb_max_commands;					\
-	     num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++, num++)
+	     num++, num == KDB_BASE_CMD_MAX ? cmd = kdb_commands : cmd++)
 
 typedef struct _kdbmsg {
 	int	km_diag;	/* kdb diagnostic */
@@ -646,7 +646,7 @@ static int kdb_defcmd2(const char *cmdstr, const char *argv0)
 	}
 	if (!s->usable)
 		return KDB_NOTIMP;
-	s->command = kmalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB);
+	s->command = kzalloc((s->count + 1) * sizeof(*(s->command)), GFP_KDB);
 	if (!s->command) {
 		kdb_printf("Could not allocate new kdb_defcmd table for %s\n",
 			   cmdstr);
@@ -2361,7 +2361,7 @@ static int kdb_pid(int argc, const char **argv)
  */
 static int kdb_ll(int argc, const char **argv)
 {
-	int diag;
+	int diag = 0;
 	unsigned long addr;
 	long offset = 0;
 	unsigned long va;
@@ -2400,20 +2400,21 @@ static int kdb_ll(int argc, const char **argv)
 		char buf[80];
 
 		if (KDB_FLAG(CMD_INTERRUPT))
-			return 0;
+			goto out;
 
 		sprintf(buf, "%s " kdb_machreg_fmt "\n", command, va);
 		diag = kdb_parse(buf);
 		if (diag)
-			return diag;
+			goto out;
 
 		addr = va + linkoffset;
 		if (kdb_getword(&va, addr, sizeof(va)))
-			return 0;
+			goto out;
 	}
-	kfree(command);
 
-	return 0;
+out:
+	kfree(command);
+	return diag;
 }
 
 static int kdb_kgdb(int argc, const char **argv)
@@ -2739,13 +2740,13 @@ int kdb_register_repeat(char *cmd,
 		}
 		if (kdb_commands) {
 			memcpy(new, kdb_commands,
-			       kdb_max_commands * sizeof(*new));
+			  (kdb_max_commands - KDB_BASE_CMD_MAX) * sizeof(*new));
 			kfree(kdb_commands);
 		}
 		memset(new + kdb_max_commands, 0,
 		       kdb_command_extend * sizeof(*new));
 		kdb_commands = new;
-		kp = kdb_commands + kdb_max_commands;
+		kp = kdb_commands + kdb_max_commands - KDB_BASE_CMD_MAX;
 		kdb_max_commands += kdb_command_extend;
 	}
 
diff --git a/kernel/exit.c b/kernel/exit.c
index 21aa7b3001f..89c74861a3d 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -69,7 +69,7 @@ static void __unhash_process(struct task_struct *p, bool group_dead)
 
 		list_del_rcu(&p->tasks);
 		list_del_init(&p->sibling);
-		__get_cpu_var(process_counts)--;
+		__this_cpu_dec(process_counts);
 	}
 	list_del_rcu(&p->thread_group);
 }
@@ -914,6 +914,15 @@ NORET_TYPE void do_exit(long code)
 	if (unlikely(!tsk->pid))
 		panic("Attempted to kill the idle task!");
 
+	/*
+	 * If do_exit is called because this processes oopsed, it's possible
+	 * that get_fs() was left as KERNEL_DS, so reset it to USER_DS before
+	 * continuing. Amongst other possible reasons, this is to prevent
+	 * mm_release()->clear_child_tid() from writing to a user-controlled
+	 * kernel address.
+	 */
+	set_fs(USER_DS);
+
 	tracehook_report_exit(&code);
 
 	validate_creds_for_do_exit(tsk);
diff --git a/kernel/fork.c b/kernel/fork.c
index 3b159c5991b..d9b44f20b6b 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -169,6 +169,7 @@ EXPORT_SYMBOL(free_task);
 static inline void free_signal_struct(struct signal_struct *sig)
 {
 	taskstats_tgid_free(sig);
+	sched_autogroup_exit(sig);
 	kmem_cache_free(signal_cachep, sig);
 }
 
@@ -273,6 +274,7 @@ static struct task_struct *dup_task_struct(struct task_struct *orig)
 
 	setup_thread_stack(tsk, orig);
 	clear_user_return_notifier(tsk);
+	clear_tsk_need_resched(tsk);
 	stackend = end_of_stack(tsk);
 	*stackend = STACK_END_MAGIC;	/* for overflow detection */
 
@@ -904,6 +906,7 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk)
 	posix_cpu_timers_init_group(sig);
 
 	tty_audit_fork(sig);
+	sched_autogroup_fork(sig);
 
 	sig->oom_adj = current->signal->oom_adj;
 	sig->oom_score_adj = current->signal->oom_score_adj;
@@ -1282,7 +1285,7 @@ static struct task_struct *copy_process(unsigned long clone_flags,
 			attach_pid(p, PIDTYPE_SID, task_session(current));
 			list_add_tail(&p->sibling, &p->real_parent->children);
 			list_add_tail_rcu(&p->tasks, &init_task.tasks);
-			__get_cpu_var(process_counts)++;
+			__this_cpu_inc(process_counts);
 		}
 		attach_pid(p, PIDTYPE_PID, pid);
 		nr_threads++;
diff --git a/kernel/futex.c b/kernel/futex.c
index 6c683b37f2c..3019b92e691 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -69,6 +69,14 @@ int __read_mostly futex_cmpxchg_enabled;
 #define FUTEX_HASHBITS (CONFIG_BASE_SMALL ? 4 : 8)
 
 /*
+ * Futex flags used to encode options to functions and preserve them across
+ * restarts.
+ */
+#define FLAGS_SHARED		0x01
+#define FLAGS_CLOCKRT		0x02
+#define FLAGS_HAS_TIMEOUT	0x04
+
+/*
  * Priority Inheritance state:
  */
 struct futex_pi_state {
@@ -123,6 +131,12 @@ struct futex_q {
 	u32 bitset;
 };
 
+static const struct futex_q futex_q_init = {
+	/* list gets initialized in queue_me()*/
+	.key = FUTEX_KEY_INIT,
+	.bitset = FUTEX_BITSET_MATCH_ANY
+};
+
 /*
  * Hash buckets are shared by all the futex_keys that hash to the same
  * location.  Each key may have multiple futex_q structures, one for each task
@@ -283,8 +297,7 @@ again:
 	return 0;
 }
 
-static inline
-void put_futex_key(int fshared, union futex_key *key)
+static inline void put_futex_key(union futex_key *key)
 {
 	drop_futex_key_refs(key);
 }
@@ -870,7 +883,8 @@ double_unlock_hb(struct futex_hash_bucket *hb1, struct futex_hash_bucket *hb2)
 /*
  * Wake up waiters matching bitset queued on this futex (uaddr).
  */
-static int futex_wake(u32 __user *uaddr, int fshared, int nr_wake, u32 bitset)
+static int
+futex_wake(u32 __user *uaddr, unsigned int flags, int nr_wake, u32 bitset)
 {
 	struct futex_hash_bucket *hb;
 	struct futex_q *this, *next;
@@ -881,7 +895,7 @@ static int futex_wake(u32 __user *uaddr, int fshared, int nr_wake, u32 bitset)
 	if (!bitset)
 		return -EINVAL;
 
-	ret = get_futex_key(uaddr, fshared, &key);
+	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &key);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -907,7 +921,7 @@ static int futex_wake(u32 __user *uaddr, int fshared, int nr_wake, u32 bitset)
 	}
 
 	spin_unlock(&hb->lock);
-	put_futex_key(fshared, &key);
+	put_futex_key(&key);
 out:
 	return ret;
 }
@@ -917,7 +931,7 @@ out:
  * to this virtual address:
  */
 static int
-futex_wake_op(u32 __user *uaddr1, int fshared, u32 __user *uaddr2,
+futex_wake_op(u32 __user *uaddr1, unsigned int flags, u32 __user *uaddr2,
 	      int nr_wake, int nr_wake2, int op)
 {
 	union futex_key key1 = FUTEX_KEY_INIT, key2 = FUTEX_KEY_INIT;
@@ -927,10 +941,10 @@ futex_wake_op(u32 __user *uaddr1, int fshared, u32 __user *uaddr2,
 	int ret, op_ret;
 
 retry:
-	ret = get_futex_key(uaddr1, fshared, &key1);
+	ret = get_futex_key(uaddr1, flags & FLAGS_SHARED, &key1);
 	if (unlikely(ret != 0))
 		goto out;
-	ret = get_futex_key(uaddr2, fshared, &key2);
+	ret = get_futex_key(uaddr2, flags & FLAGS_SHARED, &key2);
 	if (unlikely(ret != 0))
 		goto out_put_key1;
 
@@ -962,11 +976,11 @@ retry_private:
 		if (ret)
 			goto out_put_keys;
 
-		if (!fshared)
+		if (!(flags & FLAGS_SHARED))
 			goto retry_private;
 
-		put_futex_key(fshared, &key2);
-		put_futex_key(fshared, &key1);
+		put_futex_key(&key2);
+		put_futex_key(&key1);
 		goto retry;
 	}
 
@@ -996,9 +1010,9 @@ retry_private:
 
 	double_unlock_hb(hb1, hb2);
 out_put_keys:
-	put_futex_key(fshared, &key2);
+	put_futex_key(&key2);
 out_put_key1:
-	put_futex_key(fshared, &key1);
+	put_futex_key(&key1);
 out:
 	return ret;
 }
@@ -1133,13 +1147,13 @@ static int futex_proxy_trylock_atomic(u32 __user *pifutex,
 /**
  * futex_requeue() - Requeue waiters from uaddr1 to uaddr2
  * @uaddr1:	source futex user address
- * @fshared:	0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
+ * @flags:	futex flags (FLAGS_SHARED, etc.)
  * @uaddr2:	target futex user address
  * @nr_wake:	number of waiters to wake (must be 1 for requeue_pi)
  * @nr_requeue:	number of waiters to requeue (0-INT_MAX)
  * @cmpval:	@uaddr1 expected value (or %NULL)
  * @requeue_pi:	if we are attempting to requeue from a non-pi futex to a
- * 		pi futex (pi to pi requeue is not supported)
+ *		pi futex (pi to pi requeue is not supported)
  *
  * Requeue waiters on uaddr1 to uaddr2. In the requeue_pi case, try to acquire
  * uaddr2 atomically on behalf of the top waiter.
@@ -1148,9 +1162,9 @@ static int futex_proxy_trylock_atomic(u32 __user *pifutex,
  * >=0 - on success, the number of tasks requeued or woken
  *  <0 - on error
  */
-static int futex_requeue(u32 __user *uaddr1, int fshared, u32 __user *uaddr2,
-			 int nr_wake, int nr_requeue, u32 *cmpval,
-			 int requeue_pi)
+static int futex_requeue(u32 __user *uaddr1, unsigned int flags,
+			 u32 __user *uaddr2, int nr_wake, int nr_requeue,
+			 u32 *cmpval, int requeue_pi)
 {
 	union futex_key key1 = FUTEX_KEY_INIT, key2 = FUTEX_KEY_INIT;
 	int drop_count = 0, task_count = 0, ret;
@@ -1191,10 +1205,10 @@ retry:
 		pi_state = NULL;
 	}
 
-	ret = get_futex_key(uaddr1, fshared, &key1);
+	ret = get_futex_key(uaddr1, flags & FLAGS_SHARED, &key1);
 	if (unlikely(ret != 0))
 		goto out;
-	ret = get_futex_key(uaddr2, fshared, &key2);
+	ret = get_futex_key(uaddr2, flags & FLAGS_SHARED, &key2);
 	if (unlikely(ret != 0))
 		goto out_put_key1;
 
@@ -1216,11 +1230,11 @@ retry_private:
 			if (ret)
 				goto out_put_keys;
 
-			if (!fshared)
+			if (!(flags & FLAGS_SHARED))
 				goto retry_private;
 
-			put_futex_key(fshared, &key2);
-			put_futex_key(fshared, &key1);
+			put_futex_key(&key2);
+			put_futex_key(&key1);
 			goto retry;
 		}
 		if (curval != *cmpval) {
@@ -1260,8 +1274,8 @@ retry_private:
 			break;
 		case -EFAULT:
 			double_unlock_hb(hb1, hb2);
-			put_futex_key(fshared, &key2);
-			put_futex_key(fshared, &key1);
+			put_futex_key(&key2);
+			put_futex_key(&key1);
 			ret = fault_in_user_writeable(uaddr2);
 			if (!ret)
 				goto retry;
@@ -1269,8 +1283,8 @@ retry_private:
 		case -EAGAIN:
 			/* The owner was exiting, try again. */
 			double_unlock_hb(hb1, hb2);
-			put_futex_key(fshared, &key2);
-			put_futex_key(fshared, &key1);
+			put_futex_key(&key2);
+			put_futex_key(&key1);
 			cond_resched();
 			goto retry;
 		default:
@@ -1352,9 +1366,9 @@ out_unlock:
 		drop_futex_key_refs(&key1);
 
 out_put_keys:
-	put_futex_key(fshared, &key2);
+	put_futex_key(&key2);
 out_put_key1:
-	put_futex_key(fshared, &key1);
+	put_futex_key(&key1);
 out:
 	if (pi_state != NULL)
 		free_pi_state(pi_state);
@@ -1494,7 +1508,7 @@ static void unqueue_me_pi(struct futex_q *q)
  * private futexes.
  */
 static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q,
-				struct task_struct *newowner, int fshared)
+				struct task_struct *newowner)
 {
 	u32 newtid = task_pid_vnr(newowner) | FUTEX_WAITERS;
 	struct futex_pi_state *pi_state = q->pi_state;
@@ -1587,20 +1601,11 @@ handle_fault:
 	goto retry;
 }
 
-/*
- * In case we must use restart_block to restart a futex_wait,
- * we encode in the 'flags' shared capability
- */
-#define FLAGS_SHARED		0x01
-#define FLAGS_CLOCKRT		0x02
-#define FLAGS_HAS_TIMEOUT	0x04
-
 static long futex_wait_restart(struct restart_block *restart);
 
 /**
  * fixup_owner() - Post lock pi_state and corner case management
  * @uaddr:	user address of the futex
- * @fshared:	whether the futex is shared (1) or not (0)
  * @q:		futex_q (contains pi_state and access to the rt_mutex)
  * @locked:	if the attempt to take the rt_mutex succeeded (1) or not (0)
  *
@@ -1613,8 +1618,7 @@ static long futex_wait_restart(struct restart_block *restart);
  *  0 - success, lock not taken
  * <0 - on error (-EFAULT)
  */
-static int fixup_owner(u32 __user *uaddr, int fshared, struct futex_q *q,
-		       int locked)
+static int fixup_owner(u32 __user *uaddr, struct futex_q *q, int locked)
 {
 	struct task_struct *owner;
 	int ret = 0;
@@ -1625,7 +1629,7 @@ static int fixup_owner(u32 __user *uaddr, int fshared, struct futex_q *q,
 		 * did a lock-steal - fix up the PI-state in that case:
 		 */
 		if (q->pi_state->owner != current)
-			ret = fixup_pi_state_owner(uaddr, q, current, fshared);
+			ret = fixup_pi_state_owner(uaddr, q, current);
 		goto out;
 	}
 
@@ -1652,7 +1656,7 @@ static int fixup_owner(u32 __user *uaddr, int fshared, struct futex_q *q,
 		 * lock. Fix the state up.
 		 */
 		owner = rt_mutex_owner(&q->pi_state->pi_mutex);
-		ret = fixup_pi_state_owner(uaddr, q, owner, fshared);
+		ret = fixup_pi_state_owner(uaddr, q, owner);
 		goto out;
 	}
 
@@ -1715,7 +1719,7 @@ static void futex_wait_queue_me(struct futex_hash_bucket *hb, struct futex_q *q,
  * futex_wait_setup() - Prepare to wait on a futex
  * @uaddr:	the futex userspace address
  * @val:	the expected value
- * @fshared:	whether the futex is shared (1) or not (0)
+ * @flags:	futex flags (FLAGS_SHARED, etc.)
  * @q:		the associated futex_q
  * @hb:		storage for hash_bucket pointer to be returned to caller
  *
@@ -1728,7 +1732,7 @@ static void futex_wait_queue_me(struct futex_hash_bucket *hb, struct futex_q *q,
  *  0 - uaddr contains val and hb has been locked
  * <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlcoked
  */
-static int futex_wait_setup(u32 __user *uaddr, u32 val, int fshared,
+static int futex_wait_setup(u32 __user *uaddr, u32 val, unsigned int flags,
 			   struct futex_q *q, struct futex_hash_bucket **hb)
 {
 	u32 uval;
@@ -1752,8 +1756,7 @@ static int futex_wait_setup(u32 __user *uaddr, u32 val, int fshared,
 	 * rare, but normal.
 	 */
 retry:
-	q->key = FUTEX_KEY_INIT;
-	ret = get_futex_key(uaddr, fshared, &q->key);
+	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &q->key);
 	if (unlikely(ret != 0))
 		return ret;
 
@@ -1769,10 +1772,10 @@ retry_private:
 		if (ret)
 			goto out;
 
-		if (!fshared)
+		if (!(flags & FLAGS_SHARED))
 			goto retry_private;
 
-		put_futex_key(fshared, &q->key);
+		put_futex_key(&q->key);
 		goto retry;
 	}
 
@@ -1783,32 +1786,29 @@ retry_private:
 
 out:
 	if (ret)
-		put_futex_key(fshared, &q->key);
+		put_futex_key(&q->key);
 	return ret;
 }
 
-static int futex_wait(u32 __user *uaddr, int fshared,
-		      u32 val, ktime_t *abs_time, u32 bitset, int clockrt)
+static int futex_wait(u32 __user *uaddr, unsigned int flags, u32 val,
+		      ktime_t *abs_time, u32 bitset)
 {
 	struct hrtimer_sleeper timeout, *to = NULL;
 	struct restart_block *restart;
 	struct futex_hash_bucket *hb;
-	struct futex_q q;
+	struct futex_q q = futex_q_init;
 	int ret;
 
 	if (!bitset)
 		return -EINVAL;
-
-	q.pi_state = NULL;
 	q.bitset = bitset;
-	q.rt_waiter = NULL;
-	q.requeue_pi_key = NULL;
 
 	if (abs_time) {
 		to = &timeout;
 
-		hrtimer_init_on_stack(&to->timer, clockrt ? CLOCK_REALTIME :
-				      CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+		hrtimer_init_on_stack(&to->timer, (flags & FLAGS_CLOCKRT) ?
+				      CLOCK_REALTIME : CLOCK_MONOTONIC,
+				      HRTIMER_MODE_ABS);
 		hrtimer_init_sleeper(to, current);
 		hrtimer_set_expires_range_ns(&to->timer, *abs_time,
 					     current->timer_slack_ns);
@@ -1819,7 +1819,7 @@ retry:
 	 * Prepare to wait on uaddr. On success, holds hb lock and increments
 	 * q.key refs.
 	 */
-	ret = futex_wait_setup(uaddr, val, fshared, &q, &hb);
+	ret = futex_wait_setup(uaddr, val, flags, &q, &hb);
 	if (ret)
 		goto out;
 
@@ -1852,12 +1852,7 @@ retry:
 	restart->futex.val = val;
 	restart->futex.time = abs_time->tv64;
 	restart->futex.bitset = bitset;
-	restart->futex.flags = FLAGS_HAS_TIMEOUT;
-
-	if (fshared)
-		restart->futex.flags |= FLAGS_SHARED;
-	if (clockrt)
-		restart->futex.flags |= FLAGS_CLOCKRT;
+	restart->futex.flags = flags;
 
 	ret = -ERESTART_RESTARTBLOCK;
 
@@ -1873,7 +1868,6 @@ out:
 static long futex_wait_restart(struct restart_block *restart)
 {
 	u32 __user *uaddr = restart->futex.uaddr;
-	int fshared = 0;
 	ktime_t t, *tp = NULL;
 
 	if (restart->futex.flags & FLAGS_HAS_TIMEOUT) {
@@ -1881,11 +1875,9 @@ static long futex_wait_restart(struct restart_block *restart)
 		tp = &t;
 	}
 	restart->fn = do_no_restart_syscall;
-	if (restart->futex.flags & FLAGS_SHARED)
-		fshared = 1;
-	return (long)futex_wait(uaddr, fshared, restart->futex.val, tp,
-				restart->futex.bitset,
-				restart->futex.flags & FLAGS_CLOCKRT);
+
+	return (long)futex_wait(uaddr, restart->futex.flags,
+				restart->futex.val, tp, restart->futex.bitset);
 }
 
 
@@ -1895,12 +1887,12 @@ static long futex_wait_restart(struct restart_block *restart)
  * if there are waiters then it will block, it does PI, etc. (Due to
  * races the kernel might see a 0 value of the futex too.)
  */
-static int futex_lock_pi(u32 __user *uaddr, int fshared,
-			 int detect, ktime_t *time, int trylock)
+static int futex_lock_pi(u32 __user *uaddr, unsigned int flags, int detect,
+			 ktime_t *time, int trylock)
 {
 	struct hrtimer_sleeper timeout, *to = NULL;
 	struct futex_hash_bucket *hb;
-	struct futex_q q;
+	struct futex_q q = futex_q_init;
 	int res, ret;
 
 	if (refill_pi_state_cache())
@@ -1914,12 +1906,8 @@ static int futex_lock_pi(u32 __user *uaddr, int fshared,
 		hrtimer_set_expires(&to->timer, *time);
 	}
 
-	q.pi_state = NULL;
-	q.rt_waiter = NULL;
-	q.requeue_pi_key = NULL;
 retry:
-	q.key = FUTEX_KEY_INIT;
-	ret = get_futex_key(uaddr, fshared, &q.key);
+	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &q.key);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -1941,7 +1929,7 @@ retry_private:
 			 * exit to complete.
 			 */
 			queue_unlock(&q, hb);
-			put_futex_key(fshared, &q.key);
+			put_futex_key(&q.key);
 			cond_resched();
 			goto retry;
 		default:
@@ -1971,7 +1959,7 @@ retry_private:
 	 * Fixup the pi_state owner and possibly acquire the lock if we
 	 * haven't already.
 	 */
-	res = fixup_owner(uaddr, fshared, &q, !ret);
+	res = fixup_owner(uaddr, &q, !ret);
 	/*
 	 * If fixup_owner() returned an error, proprogate that.  If it acquired
 	 * the lock, clear our -ETIMEDOUT or -EINTR.
@@ -1995,7 +1983,7 @@ out_unlock_put_key:
 	queue_unlock(&q, hb);
 
 out_put_key:
-	put_futex_key(fshared, &q.key);
+	put_futex_key(&q.key);
 out:
 	if (to)
 		destroy_hrtimer_on_stack(&to->timer);
@@ -2008,10 +1996,10 @@ uaddr_faulted:
 	if (ret)
 		goto out_put_key;
 
-	if (!fshared)
+	if (!(flags & FLAGS_SHARED))
 		goto retry_private;
 
-	put_futex_key(fshared, &q.key);
+	put_futex_key(&q.key);
 	goto retry;
 }
 
@@ -2020,7 +2008,7 @@ uaddr_faulted:
  * This is the in-kernel slowpath: we look up the PI state (if any),
  * and do the rt-mutex unlock.
  */
-static int futex_unlock_pi(u32 __user *uaddr, int fshared)
+static int futex_unlock_pi(u32 __user *uaddr, unsigned int flags)
 {
 	struct futex_hash_bucket *hb;
 	struct futex_q *this, *next;
@@ -2038,7 +2026,7 @@ retry:
 	if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current))
 		return -EPERM;
 
-	ret = get_futex_key(uaddr, fshared, &key);
+	ret = get_futex_key(uaddr, flags & FLAGS_SHARED, &key);
 	if (unlikely(ret != 0))
 		goto out;
 
@@ -2093,14 +2081,14 @@ retry:
 
 out_unlock:
 	spin_unlock(&hb->lock);
-	put_futex_key(fshared, &key);
+	put_futex_key(&key);
 
 out:
 	return ret;
 
 pi_faulted:
 	spin_unlock(&hb->lock);
-	put_futex_key(fshared, &key);
+	put_futex_key(&key);
 
 	ret = fault_in_user_writeable(uaddr);
 	if (!ret)
@@ -2160,7 +2148,7 @@ int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb,
 /**
  * futex_wait_requeue_pi() - Wait on uaddr and take uaddr2
  * @uaddr:	the futex we initially wait on (non-pi)
- * @fshared:	whether the futexes are shared (1) or not (0).  They must be
+ * @flags:	futex flags (FLAGS_SHARED, FLAGS_CLOCKRT, etc.), they must be
  * 		the same type, no requeueing from private to shared, etc.
  * @val:	the expected value of uaddr
  * @abs_time:	absolute timeout
@@ -2198,16 +2186,16 @@ int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb,
  *  0 - On success
  * <0 - On error
  */
-static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared,
+static int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags,
 				 u32 val, ktime_t *abs_time, u32 bitset,
-				 int clockrt, u32 __user *uaddr2)
+				 u32 __user *uaddr2)
 {
 	struct hrtimer_sleeper timeout, *to = NULL;
 	struct rt_mutex_waiter rt_waiter;
 	struct rt_mutex *pi_mutex = NULL;
 	struct futex_hash_bucket *hb;
-	union futex_key key2;
-	struct futex_q q;
+	union futex_key key2 = FUTEX_KEY_INIT;
+	struct futex_q q = futex_q_init;
 	int res, ret;
 
 	if (!bitset)
@@ -2215,8 +2203,9 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared,
 
 	if (abs_time) {
 		to = &timeout;
-		hrtimer_init_on_stack(&to->timer, clockrt ? CLOCK_REALTIME :
-				      CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
+		hrtimer_init_on_stack(&to->timer, (flags & FLAGS_CLOCKRT) ?
+				      CLOCK_REALTIME : CLOCK_MONOTONIC,
+				      HRTIMER_MODE_ABS);
 		hrtimer_init_sleeper(to, current);
 		hrtimer_set_expires_range_ns(&to->timer, *abs_time,
 					     current->timer_slack_ns);
@@ -2229,12 +2218,10 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared,
 	debug_rt_mutex_init_waiter(&rt_waiter);
 	rt_waiter.task = NULL;
 
-	key2 = FUTEX_KEY_INIT;
-	ret = get_futex_key(uaddr2, fshared, &key2);
+	ret = get_futex_key(uaddr2, flags & FLAGS_SHARED, &key2);
 	if (unlikely(ret != 0))
 		goto out;
 
-	q.pi_state = NULL;
 	q.bitset = bitset;
 	q.rt_waiter = &rt_waiter;
 	q.requeue_pi_key = &key2;
@@ -2243,7 +2230,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared,
 	 * Prepare to wait on uaddr. On success, increments q.key (key1) ref
 	 * count.
 	 */
-	ret = futex_wait_setup(uaddr, val, fshared, &q, &hb);
+	ret = futex_wait_setup(uaddr, val, flags, &q, &hb);
 	if (ret)
 		goto out_key2;
 
@@ -2273,8 +2260,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared,
 		 */
 		if (q.pi_state && (q.pi_state->owner != current)) {
 			spin_lock(q.lock_ptr);
-			ret = fixup_pi_state_owner(uaddr2, &q, current,
-						   fshared);
+			ret = fixup_pi_state_owner(uaddr2, &q, current);
 			spin_unlock(q.lock_ptr);
 		}
 	} else {
@@ -2293,7 +2279,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared,
 		 * Fixup the pi_state owner and possibly acquire the lock if we
 		 * haven't already.
 		 */
-		res = fixup_owner(uaddr2, fshared, &q, !ret);
+		res = fixup_owner(uaddr2, &q, !ret);
 		/*
 		 * If fixup_owner() returned an error, proprogate that.  If it
 		 * acquired the lock, clear -ETIMEDOUT or -EINTR.
@@ -2324,9 +2310,9 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared,
 	}
 
 out_put_keys:
-	put_futex_key(fshared, &q.key);
+	put_futex_key(&q.key);
 out_key2:
-	put_futex_key(fshared, &key2);
+	put_futex_key(&key2);
 
 out:
 	if (to) {
@@ -2489,7 +2475,8 @@ void exit_robust_list(struct task_struct *curr)
 {
 	struct robust_list_head __user *head = curr->robust_list;
 	struct robust_list __user *entry, *next_entry, *pending;
-	unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip;
+	unsigned int limit = ROBUST_LIST_LIMIT, pi, pip;
+	unsigned int uninitialized_var(next_pi);
 	unsigned long futex_offset;
 	int rc;
 
@@ -2550,58 +2537,57 @@ void exit_robust_list(struct task_struct *curr)
 long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
 		u32 __user *uaddr2, u32 val2, u32 val3)
 {
-	int clockrt, ret = -ENOSYS;
-	int cmd = op & FUTEX_CMD_MASK;
-	int fshared = 0;
+	int ret = -ENOSYS, cmd = op & FUTEX_CMD_MASK;
+	unsigned int flags = 0;
 
 	if (!(op & FUTEX_PRIVATE_FLAG))
-		fshared = 1;
+		flags |= FLAGS_SHARED;
 
-	clockrt = op & FUTEX_CLOCK_REALTIME;
-	if (clockrt && cmd != FUTEX_WAIT_BITSET && cmd != FUTEX_WAIT_REQUEUE_PI)
-		return -ENOSYS;
+	if (op & FUTEX_CLOCK_REALTIME) {
+		flags |= FLAGS_CLOCKRT;
+		if (cmd != FUTEX_WAIT_BITSET && cmd != FUTEX_WAIT_REQUEUE_PI)
+			return -ENOSYS;
+	}
 
 	switch (cmd) {
 	case FUTEX_WAIT:
 		val3 = FUTEX_BITSET_MATCH_ANY;
 	case FUTEX_WAIT_BITSET:
-		ret = futex_wait(uaddr, fshared, val, timeout, val3, clockrt);
+		ret = futex_wait(uaddr, flags, val, timeout, val3);
 		break;
 	case FUTEX_WAKE:
 		val3 = FUTEX_BITSET_MATCH_ANY;
 	case FUTEX_WAKE_BITSET:
-		ret = futex_wake(uaddr, fshared, val, val3);
+		ret = futex_wake(uaddr, flags, val, val3);
 		break;
 	case FUTEX_REQUEUE:
-		ret = futex_requeue(uaddr, fshared, uaddr2, val, val2, NULL, 0);
+		ret = futex_requeue(uaddr, flags, uaddr2, val, val2, NULL, 0);
 		break;
 	case FUTEX_CMP_REQUEUE:
-		ret = futex_requeue(uaddr, fshared, uaddr2, val, val2, &val3,
-				    0);
+		ret = futex_requeue(uaddr, flags, uaddr2, val, val2, &val3, 0);
 		break;
 	case FUTEX_WAKE_OP:
-		ret = futex_wake_op(uaddr, fshared, uaddr2, val, val2, val3);
+		ret = futex_wake_op(uaddr, flags, uaddr2, val, val2, val3);
 		break;
 	case FUTEX_LOCK_PI:
 		if (futex_cmpxchg_enabled)
-			ret = futex_lock_pi(uaddr, fshared, val, timeout, 0);
+			ret = futex_lock_pi(uaddr, flags, val, timeout, 0);
 		break;
 	case FUTEX_UNLOCK_PI:
 		if (futex_cmpxchg_enabled)
-			ret = futex_unlock_pi(uaddr, fshared);
+			ret = futex_unlock_pi(uaddr, flags);
 		break;
 	case FUTEX_TRYLOCK_PI:
 		if (futex_cmpxchg_enabled)
-			ret = futex_lock_pi(uaddr, fshared, 0, timeout, 1);
+			ret = futex_lock_pi(uaddr, flags, 0, timeout, 1);
 		break;
 	case FUTEX_WAIT_REQUEUE_PI:
 		val3 = FUTEX_BITSET_MATCH_ANY;
-		ret = futex_wait_requeue_pi(uaddr, fshared, val, timeout, val3,
-					    clockrt, uaddr2);
+		ret = futex_wait_requeue_pi(uaddr, flags, val, timeout, val3,
+					    uaddr2);
 		break;
 	case FUTEX_CMP_REQUEUE_PI:
-		ret = futex_requeue(uaddr, fshared, uaddr2, val, val2, &val3,
-				    1);
+		ret = futex_requeue(uaddr, flags, uaddr2, val, val2, &val3, 1);
 		break;
 	default:
 		ret = -ENOSYS;
diff --git a/kernel/futex_compat.c b/kernel/futex_compat.c
index 06da4dfc339..a7934ac75e5 100644
--- a/kernel/futex_compat.c
+++ b/kernel/futex_compat.c
@@ -49,7 +49,8 @@ void compat_exit_robust_list(struct task_struct *curr)
 {
 	struct compat_robust_list_head __user *head = curr->compat_robust_list;
 	struct robust_list __user *entry, *next_entry, *pending;
-	unsigned int limit = ROBUST_LIST_LIMIT, pi, next_pi, pip;
+	unsigned int limit = ROBUST_LIST_LIMIT, pi, pip;
+	unsigned int uninitialized_var(next_pi);
 	compat_uptr_t uentry, next_uentry, upending;
 	compat_long_t futex_offset;
 	int rc;
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 72206cf5c6c..45da2b6920a 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -497,7 +497,7 @@ static inline int hrtimer_is_hres_enabled(void)
  */
 static inline int hrtimer_hres_active(void)
 {
-	return __get_cpu_var(hrtimer_bases).hres_active;
+	return __this_cpu_read(hrtimer_bases.hres_active);
 }
 
 /*
@@ -516,10 +516,13 @@ hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
 
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
 		struct hrtimer *timer;
+		struct timerqueue_node *next;
 
-		if (!base->first)
+		next = timerqueue_getnext(&base->active);
+		if (!next)
 			continue;
-		timer = rb_entry(base->first, struct hrtimer, node);
+		timer = container_of(next, struct hrtimer, node);
+
 		expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
 		/*
 		 * clock_was_set() has changed base->offset so the
@@ -840,48 +843,17 @@ EXPORT_SYMBOL_GPL(hrtimer_forward);
 static int enqueue_hrtimer(struct hrtimer *timer,
 			   struct hrtimer_clock_base *base)
 {
-	struct rb_node **link = &base->active.rb_node;
-	struct rb_node *parent = NULL;
-	struct hrtimer *entry;
-	int leftmost = 1;
-
 	debug_activate(timer);
 
-	/*
-	 * Find the right place in the rbtree:
-	 */
-	while (*link) {
-		parent = *link;
-		entry = rb_entry(parent, struct hrtimer, node);
-		/*
-		 * We dont care about collisions. Nodes with
-		 * the same expiry time stay together.
-		 */
-		if (hrtimer_get_expires_tv64(timer) <
-				hrtimer_get_expires_tv64(entry)) {
-			link = &(*link)->rb_left;
-		} else {
-			link = &(*link)->rb_right;
-			leftmost = 0;
-		}
-	}
-
-	/*
-	 * Insert the timer to the rbtree and check whether it
-	 * replaces the first pending timer
-	 */
-	if (leftmost)
-		base->first = &timer->node;
+	timerqueue_add(&base->active, &timer->node);
 
-	rb_link_node(&timer->node, parent, link);
-	rb_insert_color(&timer->node, &base->active);
 	/*
 	 * HRTIMER_STATE_ENQUEUED is or'ed to the current state to preserve the
 	 * state of a possibly running callback.
 	 */
 	timer->state |= HRTIMER_STATE_ENQUEUED;
 
-	return leftmost;
+	return (&timer->node == base->active.next);
 }
 
 /*
@@ -901,12 +873,7 @@ static void __remove_hrtimer(struct hrtimer *timer,
 	if (!(timer->state & HRTIMER_STATE_ENQUEUED))
 		goto out;
 
-	/*
-	 * Remove the timer from the rbtree and replace the first
-	 * entry pointer if necessary.
-	 */
-	if (base->first == &timer->node) {
-		base->first = rb_next(&timer->node);
+	if (&timer->node == timerqueue_getnext(&base->active)) {
 #ifdef CONFIG_HIGH_RES_TIMERS
 		/* Reprogram the clock event device. if enabled */
 		if (reprogram && hrtimer_hres_active()) {
@@ -919,7 +886,7 @@ static void __remove_hrtimer(struct hrtimer *timer,
 		}
 #endif
 	}
-	rb_erase(&timer->node, &base->active);
+	timerqueue_del(&base->active, &timer->node);
 out:
 	timer->state = newstate;
 }
@@ -1128,11 +1095,13 @@ ktime_t hrtimer_get_next_event(void)
 	if (!hrtimer_hres_active()) {
 		for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
 			struct hrtimer *timer;
+			struct timerqueue_node *next;
 
-			if (!base->first)
+			next = timerqueue_getnext(&base->active);
+			if (!next)
 				continue;
 
-			timer = rb_entry(base->first, struct hrtimer, node);
+			timer = container_of(next, struct hrtimer, node);
 			delta.tv64 = hrtimer_get_expires_tv64(timer);
 			delta = ktime_sub(delta, base->get_time());
 			if (delta.tv64 < mindelta.tv64)
@@ -1162,6 +1131,7 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
 
 	timer->base = &cpu_base->clock_base[clock_id];
 	hrtimer_init_timer_hres(timer);
+	timerqueue_init(&timer->node);
 
 #ifdef CONFIG_TIMER_STATS
 	timer->start_site = NULL;
@@ -1278,14 +1248,14 @@ retry:
 
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
 		ktime_t basenow;
-		struct rb_node *node;
+		struct timerqueue_node *node;
 
 		basenow = ktime_add(now, base->offset);
 
-		while ((node = base->first)) {
+		while ((node = timerqueue_getnext(&base->active))) {
 			struct hrtimer *timer;
 
-			timer = rb_entry(node, struct hrtimer, node);
+			timer = container_of(node, struct hrtimer, node);
 
 			/*
 			 * The immediate goal for using the softexpires is
@@ -1441,7 +1411,7 @@ void hrtimer_run_pending(void)
  */
 void hrtimer_run_queues(void)
 {
-	struct rb_node *node;
+	struct timerqueue_node *node;
 	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
 	struct hrtimer_clock_base *base;
 	int index, gettime = 1;
@@ -1451,8 +1421,7 @@ void hrtimer_run_queues(void)
 
 	for (index = 0; index < HRTIMER_MAX_CLOCK_BASES; index++) {
 		base = &cpu_base->clock_base[index];
-
-		if (!base->first)
+		if (!timerqueue_getnext(&base->active))
 			continue;
 
 		if (gettime) {
@@ -1462,10 +1431,10 @@ void hrtimer_run_queues(void)
 
 		raw_spin_lock(&cpu_base->lock);
 
-		while ((node = base->first)) {
+		while ((node = timerqueue_getnext(&base->active))) {
 			struct hrtimer *timer;
 
-			timer = rb_entry(node, struct hrtimer, node);
+			timer = container_of(node, struct hrtimer, node);
 			if (base->softirq_time.tv64 <=
 					hrtimer_get_expires_tv64(timer))
 				break;
@@ -1630,8 +1599,10 @@ static void __cpuinit init_hrtimers_cpu(int cpu)
 
 	raw_spin_lock_init(&cpu_base->lock);
 
-	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++)
+	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
 		cpu_base->clock_base[i].cpu_base = cpu_base;
+		timerqueue_init_head(&cpu_base->clock_base[i].active);
+	}
 
 	hrtimer_init_hres(cpu_base);
 }
@@ -1642,10 +1613,10 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base,
 				struct hrtimer_clock_base *new_base)
 {
 	struct hrtimer *timer;
-	struct rb_node *node;
+	struct timerqueue_node *node;
 
-	while ((node = rb_first(&old_base->active))) {
-		timer = rb_entry(node, struct hrtimer, node);
+	while ((node = timerqueue_getnext(&old_base->active))) {
+		timer = container_of(node, struct hrtimer, node);
 		BUG_ON(hrtimer_callback_running(timer));
 		debug_deactivate(timer);
 
diff --git a/kernel/hw_breakpoint.c b/kernel/hw_breakpoint.c
index 2c9120f0afc..086adf25a55 100644
--- a/kernel/hw_breakpoint.c
+++ b/kernel/hw_breakpoint.c
@@ -620,7 +620,7 @@ static struct pmu perf_breakpoint = {
 	.read		= hw_breakpoint_pmu_read,
 };
 
-static int __init init_hw_breakpoint(void)
+int __init init_hw_breakpoint(void)
 {
 	unsigned int **task_bp_pinned;
 	int cpu, err_cpu;
@@ -641,7 +641,7 @@ static int __init init_hw_breakpoint(void)
 
 	constraints_initialized = 1;
 
-	perf_pmu_register(&perf_breakpoint);
+	perf_pmu_register(&perf_breakpoint, "breakpoint", PERF_TYPE_BREAKPOINT);
 
 	return register_die_notifier(&hw_breakpoint_exceptions_nb);
 
@@ -655,6 +655,5 @@ static int __init init_hw_breakpoint(void)
 
 	return -ENOMEM;
 }
-core_initcall(init_hw_breakpoint);
 
 
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 5f92acc5f95..0caa59f747d 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -577,7 +577,9 @@ irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
  */
 static int irq_thread(void *data)
 {
-	struct sched_param param = { .sched_priority = MAX_USER_RT_PRIO/2, };
+	static const struct sched_param param = {
+		.sched_priority = MAX_USER_RT_PRIO/2,
+	};
 	struct irqaction *action = data;
 	struct irq_desc *desc = irq_to_desc(action->irq);
 	int wake, oneshot = desc->status & IRQ_ONESHOT;
diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c
index 01b1d3a8898..6c8a2a9f8a7 100644
--- a/kernel/irq/proc.c
+++ b/kernel/irq/proc.c
@@ -214,7 +214,7 @@ static int irq_spurious_proc_show(struct seq_file *m, void *v)
 
 static int irq_spurious_proc_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, irq_spurious_proc_show, NULL);
+	return single_open(file, irq_spurious_proc_show, PDE(inode)->data);
 }
 
 static const struct file_operations irq_spurious_proc_fops = {
diff --git a/kernel/irq_work.c b/kernel/irq_work.c
index f16763ff848..c58fa7da8ae 100644
--- a/kernel/irq_work.c
+++ b/kernel/irq_work.c
@@ -77,21 +77,21 @@ void __weak arch_irq_work_raise(void)
  */
 static void __irq_work_queue(struct irq_work *entry)
 {
-	struct irq_work **head, *next;
+	struct irq_work *next;
 
-	head = &get_cpu_var(irq_work_list);
+	preempt_disable();
 
 	do {
-		next = *head;
+		next = __this_cpu_read(irq_work_list);
 		/* Can assign non-atomic because we keep the flags set. */
 		entry->next = next_flags(next, IRQ_WORK_FLAGS);
-	} while (cmpxchg(head, next, entry) != next);
+	} while (this_cpu_cmpxchg(irq_work_list, next, entry) != next);
 
 	/* The list was empty, raise self-interrupt to start processing. */
 	if (!irq_work_next(entry))
 		arch_irq_work_raise();
 
-	put_cpu_var(irq_work_list);
+	preempt_enable();
 }
 
 /*
@@ -120,16 +120,16 @@ EXPORT_SYMBOL_GPL(irq_work_queue);
  */
 void irq_work_run(void)
 {
-	struct irq_work *list, **head;
+	struct irq_work *list;
 
-	head = &__get_cpu_var(irq_work_list);
-	if (*head == NULL)
+	if (this_cpu_read(irq_work_list) == NULL)
 		return;
 
 	BUG_ON(!in_irq());
 	BUG_ON(!irqs_disabled());
 
-	list = xchg(head, NULL);
+	list = this_cpu_xchg(irq_work_list, NULL);
+
 	while (list != NULL) {
 		struct irq_work *entry = list;
 
@@ -145,7 +145,9 @@ void irq_work_run(void)
 		 * Clear the BUSY bit and return to the free state if
 		 * no-one else claimed it meanwhile.
 		 */
-		cmpxchg(&entry->next, next_flags(NULL, IRQ_WORK_BUSY), NULL);
+		(void)cmpxchg(&entry->next,
+			      next_flags(NULL, IRQ_WORK_BUSY),
+			      NULL);
 	}
 }
 EXPORT_SYMBOL_GPL(irq_work_run);
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 9737a76e106..77981813a1e 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -317,12 +317,12 @@ void __kprobes free_optinsn_slot(kprobe_opcode_t * slot, int dirty)
 /* We have preemption disabled.. so it is safe to use __ versions */
 static inline void set_kprobe_instance(struct kprobe *kp)
 {
-	__get_cpu_var(kprobe_instance) = kp;
+	__this_cpu_write(kprobe_instance, kp);
 }
 
 static inline void reset_kprobe_instance(void)
 {
-	__get_cpu_var(kprobe_instance) = NULL;
+	__this_cpu_write(kprobe_instance, NULL);
 }
 
 /*
@@ -354,13 +354,20 @@ static inline int kprobe_aggrprobe(struct kprobe *p)
 	return p->pre_handler == aggr_pre_handler;
 }
 
+/* Return true(!0) if the kprobe is unused */
+static inline int kprobe_unused(struct kprobe *p)
+{
+	return kprobe_aggrprobe(p) && kprobe_disabled(p) &&
+	       list_empty(&p->list);
+}
+
 /*
  * Keep all fields in the kprobe consistent
  */
-static inline void copy_kprobe(struct kprobe *old_p, struct kprobe *p)
+static inline void copy_kprobe(struct kprobe *ap, struct kprobe *p)
 {
-	memcpy(&p->opcode, &old_p->opcode, sizeof(kprobe_opcode_t));
-	memcpy(&p->ainsn, &old_p->ainsn, sizeof(struct arch_specific_insn));
+	memcpy(&p->opcode, &ap->opcode, sizeof(kprobe_opcode_t));
+	memcpy(&p->ainsn, &ap->ainsn, sizeof(struct arch_specific_insn));
 }
 
 #ifdef CONFIG_OPTPROBES
@@ -384,6 +391,17 @@ void __kprobes opt_pre_handler(struct kprobe *p, struct pt_regs *regs)
 	}
 }
 
+/* Free optimized instructions and optimized_kprobe */
+static __kprobes void free_aggr_kprobe(struct kprobe *p)
+{
+	struct optimized_kprobe *op;
+
+	op = container_of(p, struct optimized_kprobe, kp);
+	arch_remove_optimized_kprobe(op);
+	arch_remove_kprobe(p);
+	kfree(op);
+}
+
 /* Return true(!0) if the kprobe is ready for optimization. */
 static inline int kprobe_optready(struct kprobe *p)
 {
@@ -397,6 +415,33 @@ static inline int kprobe_optready(struct kprobe *p)
 	return 0;
 }
 
+/* Return true(!0) if the kprobe is disarmed. Note: p must be on hash list */
+static inline int kprobe_disarmed(struct kprobe *p)
+{
+	struct optimized_kprobe *op;
+
+	/* If kprobe is not aggr/opt probe, just return kprobe is disabled */
+	if (!kprobe_aggrprobe(p))
+		return kprobe_disabled(p);
+
+	op = container_of(p, struct optimized_kprobe, kp);
+
+	return kprobe_disabled(p) && list_empty(&op->list);
+}
+
+/* Return true(!0) if the probe is queued on (un)optimizing lists */
+static int __kprobes kprobe_queued(struct kprobe *p)
+{
+	struct optimized_kprobe *op;
+
+	if (kprobe_aggrprobe(p)) {
+		op = container_of(p, struct optimized_kprobe, kp);
+		if (!list_empty(&op->list))
+			return 1;
+	}
+	return 0;
+}
+
 /*
  * Return an optimized kprobe whose optimizing code replaces
  * instructions including addr (exclude breakpoint).
@@ -422,30 +467,23 @@ static struct kprobe *__kprobes get_optimized_kprobe(unsigned long addr)
 
 /* Optimization staging list, protected by kprobe_mutex */
 static LIST_HEAD(optimizing_list);
+static LIST_HEAD(unoptimizing_list);
 
 static void kprobe_optimizer(struct work_struct *work);
 static DECLARE_DELAYED_WORK(optimizing_work, kprobe_optimizer);
+static DECLARE_COMPLETION(optimizer_comp);
 #define OPTIMIZE_DELAY 5
 
-/* Kprobe jump optimizer */
-static __kprobes void kprobe_optimizer(struct work_struct *work)
+/*
+ * Optimize (replace a breakpoint with a jump) kprobes listed on
+ * optimizing_list.
+ */
+static __kprobes void do_optimize_kprobes(void)
 {
-	struct optimized_kprobe *op, *tmp;
-
-	/* Lock modules while optimizing kprobes */
-	mutex_lock(&module_mutex);
-	mutex_lock(&kprobe_mutex);
-	if (kprobes_all_disarmed || !kprobes_allow_optimization)
-		goto end;
-
-	/*
-	 * Wait for quiesence period to ensure all running interrupts
-	 * are done. Because optprobe may modify multiple instructions
-	 * there is a chance that Nth instruction is interrupted. In that
-	 * case, running interrupt can return to 2nd-Nth byte of jump
-	 * instruction. This wait is for avoiding it.
-	 */
-	synchronize_sched();
+	/* Optimization never be done when disarmed */
+	if (kprobes_all_disarmed || !kprobes_allow_optimization ||
+	    list_empty(&optimizing_list))
+		return;
 
 	/*
 	 * The optimization/unoptimization refers online_cpus via
@@ -459,17 +497,111 @@ static __kprobes void kprobe_optimizer(struct work_struct *work)
 	 */
 	get_online_cpus();
 	mutex_lock(&text_mutex);
-	list_for_each_entry_safe(op, tmp, &optimizing_list, list) {
-		WARN_ON(kprobe_disabled(&op->kp));
-		if (arch_optimize_kprobe(op) < 0)
-			op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
-		list_del_init(&op->list);
+	arch_optimize_kprobes(&optimizing_list);
+	mutex_unlock(&text_mutex);
+	put_online_cpus();
+}
+
+/*
+ * Unoptimize (replace a jump with a breakpoint and remove the breakpoint
+ * if need) kprobes listed on unoptimizing_list.
+ */
+static __kprobes void do_unoptimize_kprobes(struct list_head *free_list)
+{
+	struct optimized_kprobe *op, *tmp;
+
+	/* Unoptimization must be done anytime */
+	if (list_empty(&unoptimizing_list))
+		return;
+
+	/* Ditto to do_optimize_kprobes */
+	get_online_cpus();
+	mutex_lock(&text_mutex);
+	arch_unoptimize_kprobes(&unoptimizing_list, free_list);
+	/* Loop free_list for disarming */
+	list_for_each_entry_safe(op, tmp, free_list, list) {
+		/* Disarm probes if marked disabled */
+		if (kprobe_disabled(&op->kp))
+			arch_disarm_kprobe(&op->kp);
+		if (kprobe_unused(&op->kp)) {
+			/*
+			 * Remove unused probes from hash list. After waiting
+			 * for synchronization, these probes are reclaimed.
+			 * (reclaiming is done by do_free_cleaned_kprobes.)
+			 */
+			hlist_del_rcu(&op->kp.hlist);
+		} else
+			list_del_init(&op->list);
 	}
 	mutex_unlock(&text_mutex);
 	put_online_cpus();
-end:
+}
+
+/* Reclaim all kprobes on the free_list */
+static __kprobes void do_free_cleaned_kprobes(struct list_head *free_list)
+{
+	struct optimized_kprobe *op, *tmp;
+
+	list_for_each_entry_safe(op, tmp, free_list, list) {
+		BUG_ON(!kprobe_unused(&op->kp));
+		list_del_init(&op->list);
+		free_aggr_kprobe(&op->kp);
+	}
+}
+
+/* Start optimizer after OPTIMIZE_DELAY passed */
+static __kprobes void kick_kprobe_optimizer(void)
+{
+	if (!delayed_work_pending(&optimizing_work))
+		schedule_delayed_work(&optimizing_work, OPTIMIZE_DELAY);
+}
+
+/* Kprobe jump optimizer */
+static __kprobes void kprobe_optimizer(struct work_struct *work)
+{
+	LIST_HEAD(free_list);
+
+	/* Lock modules while optimizing kprobes */
+	mutex_lock(&module_mutex);
+	mutex_lock(&kprobe_mutex);
+
+	/*
+	 * Step 1: Unoptimize kprobes and collect cleaned (unused and disarmed)
+	 * kprobes before waiting for quiesence period.
+	 */
+	do_unoptimize_kprobes(&free_list);
+
+	/*
+	 * Step 2: Wait for quiesence period to ensure all running interrupts
+	 * are done. Because optprobe may modify multiple instructions
+	 * there is a chance that Nth instruction is interrupted. In that
+	 * case, running interrupt can return to 2nd-Nth byte of jump
+	 * instruction. This wait is for avoiding it.
+	 */
+	synchronize_sched();
+
+	/* Step 3: Optimize kprobes after quiesence period */
+	do_optimize_kprobes();
+
+	/* Step 4: Free cleaned kprobes after quiesence period */
+	do_free_cleaned_kprobes(&free_list);
+
 	mutex_unlock(&kprobe_mutex);
 	mutex_unlock(&module_mutex);
+
+	/* Step 5: Kick optimizer again if needed */
+	if (!list_empty(&optimizing_list) || !list_empty(&unoptimizing_list))
+		kick_kprobe_optimizer();
+	else
+		/* Wake up all waiters */
+		complete_all(&optimizer_comp);
+}
+
+/* Wait for completing optimization and unoptimization */
+static __kprobes void wait_for_kprobe_optimizer(void)
+{
+	if (delayed_work_pending(&optimizing_work))
+		wait_for_completion(&optimizer_comp);
 }
 
 /* Optimize kprobe if p is ready to be optimized */
@@ -495,42 +627,99 @@ static __kprobes void optimize_kprobe(struct kprobe *p)
 	/* Check if it is already optimized. */
 	if (op->kp.flags & KPROBE_FLAG_OPTIMIZED)
 		return;
-
 	op->kp.flags |= KPROBE_FLAG_OPTIMIZED;
-	list_add(&op->list, &optimizing_list);
-	if (!delayed_work_pending(&optimizing_work))
-		schedule_delayed_work(&optimizing_work, OPTIMIZE_DELAY);
+
+	if (!list_empty(&op->list))
+		/* This is under unoptimizing. Just dequeue the probe */
+		list_del_init(&op->list);
+	else {
+		list_add(&op->list, &optimizing_list);
+		kick_kprobe_optimizer();
+	}
+}
+
+/* Short cut to direct unoptimizing */
+static __kprobes void force_unoptimize_kprobe(struct optimized_kprobe *op)
+{
+	get_online_cpus();
+	arch_unoptimize_kprobe(op);
+	put_online_cpus();
+	if (kprobe_disabled(&op->kp))
+		arch_disarm_kprobe(&op->kp);
 }
 
 /* Unoptimize a kprobe if p is optimized */
-static __kprobes void unoptimize_kprobe(struct kprobe *p)
+static __kprobes void unoptimize_kprobe(struct kprobe *p, bool force)
 {
 	struct optimized_kprobe *op;
 
-	if ((p->flags & KPROBE_FLAG_OPTIMIZED) && kprobe_aggrprobe(p)) {
-		op = container_of(p, struct optimized_kprobe, kp);
-		if (!list_empty(&op->list))
-			/* Dequeue from the optimization queue */
+	if (!kprobe_aggrprobe(p) || kprobe_disarmed(p))
+		return; /* This is not an optprobe nor optimized */
+
+	op = container_of(p, struct optimized_kprobe, kp);
+	if (!kprobe_optimized(p)) {
+		/* Unoptimized or unoptimizing case */
+		if (force && !list_empty(&op->list)) {
+			/*
+			 * Only if this is unoptimizing kprobe and forced,
+			 * forcibly unoptimize it. (No need to unoptimize
+			 * unoptimized kprobe again :)
+			 */
 			list_del_init(&op->list);
-		else
-			/* Replace jump with break */
-			arch_unoptimize_kprobe(op);
-		op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
+			force_unoptimize_kprobe(op);
+		}
+		return;
+	}
+
+	op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
+	if (!list_empty(&op->list)) {
+		/* Dequeue from the optimization queue */
+		list_del_init(&op->list);
+		return;
+	}
+	/* Optimized kprobe case */
+	if (force)
+		/* Forcibly update the code: this is a special case */
+		force_unoptimize_kprobe(op);
+	else {
+		list_add(&op->list, &unoptimizing_list);
+		kick_kprobe_optimizer();
 	}
 }
 
+/* Cancel unoptimizing for reusing */
+static void reuse_unused_kprobe(struct kprobe *ap)
+{
+	struct optimized_kprobe *op;
+
+	BUG_ON(!kprobe_unused(ap));
+	/*
+	 * Unused kprobe MUST be on the way of delayed unoptimizing (means
+	 * there is still a relative jump) and disabled.
+	 */
+	op = container_of(ap, struct optimized_kprobe, kp);
+	if (unlikely(list_empty(&op->list)))
+		printk(KERN_WARNING "Warning: found a stray unused "
+			"aggrprobe@%p\n", ap->addr);
+	/* Enable the probe again */
+	ap->flags &= ~KPROBE_FLAG_DISABLED;
+	/* Optimize it again (remove from op->list) */
+	BUG_ON(!kprobe_optready(ap));
+	optimize_kprobe(ap);
+}
+
 /* Remove optimized instructions */
 static void __kprobes kill_optimized_kprobe(struct kprobe *p)
 {
 	struct optimized_kprobe *op;
 
 	op = container_of(p, struct optimized_kprobe, kp);
-	if (!list_empty(&op->list)) {
-		/* Dequeue from the optimization queue */
+	if (!list_empty(&op->list))
+		/* Dequeue from the (un)optimization queue */
 		list_del_init(&op->list);
-		op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
-	}
-	/* Don't unoptimize, because the target code will be freed. */
+
+	op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED;
+	/* Don't touch the code, because it is already freed. */
 	arch_remove_optimized_kprobe(op);
 }
 
@@ -543,16 +732,6 @@ static __kprobes void prepare_optimized_kprobe(struct kprobe *p)
 	arch_prepare_optimized_kprobe(op);
 }
 
-/* Free optimized instructions and optimized_kprobe */
-static __kprobes void free_aggr_kprobe(struct kprobe *p)
-{
-	struct optimized_kprobe *op;
-
-	op = container_of(p, struct optimized_kprobe, kp);
-	arch_remove_optimized_kprobe(op);
-	kfree(op);
-}
-
 /* Allocate new optimized_kprobe and try to prepare optimized instructions */
 static __kprobes struct kprobe *alloc_aggr_kprobe(struct kprobe *p)
 {
@@ -587,7 +766,8 @@ static __kprobes void try_to_optimize_kprobe(struct kprobe *p)
 	op = container_of(ap, struct optimized_kprobe, kp);
 	if (!arch_prepared_optinsn(&op->optinsn)) {
 		/* If failed to setup optimizing, fallback to kprobe */
-		free_aggr_kprobe(ap);
+		arch_remove_optimized_kprobe(op);
+		kfree(op);
 		return;
 	}
 
@@ -631,21 +811,16 @@ static void __kprobes unoptimize_all_kprobes(void)
 		return;
 
 	kprobes_allow_optimization = false;
-	printk(KERN_INFO "Kprobes globally unoptimized\n");
-	get_online_cpus();	/* For avoiding text_mutex deadlock */
-	mutex_lock(&text_mutex);
 	for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
 		head = &kprobe_table[i];
 		hlist_for_each_entry_rcu(p, node, head, hlist) {
 			if (!kprobe_disabled(p))
-				unoptimize_kprobe(p);
+				unoptimize_kprobe(p, false);
 		}
 	}
-
-	mutex_unlock(&text_mutex);
-	put_online_cpus();
-	/* Allow all currently running kprobes to complete */
-	synchronize_sched();
+	/* Wait for unoptimizing completion */
+	wait_for_kprobe_optimizer();
+	printk(KERN_INFO "Kprobes globally unoptimized\n");
 }
 
 int sysctl_kprobes_optimization;
@@ -669,44 +844,60 @@ int proc_kprobes_optimization_handler(struct ctl_table *table, int write,
 }
 #endif /* CONFIG_SYSCTL */
 
+/* Put a breakpoint for a probe. Must be called with text_mutex locked */
 static void __kprobes __arm_kprobe(struct kprobe *p)
 {
-	struct kprobe *old_p;
+	struct kprobe *_p;
 
 	/* Check collision with other optimized kprobes */
-	old_p = get_optimized_kprobe((unsigned long)p->addr);
-	if (unlikely(old_p))
-		unoptimize_kprobe(old_p); /* Fallback to unoptimized kprobe */
+	_p = get_optimized_kprobe((unsigned long)p->addr);
+	if (unlikely(_p))
+		/* Fallback to unoptimized kprobe */
+		unoptimize_kprobe(_p, true);
 
 	arch_arm_kprobe(p);
 	optimize_kprobe(p);	/* Try to optimize (add kprobe to a list) */
 }
 
-static void __kprobes __disarm_kprobe(struct kprobe *p)
+/* Remove the breakpoint of a probe. Must be called with text_mutex locked */
+static void __kprobes __disarm_kprobe(struct kprobe *p, bool reopt)
 {
-	struct kprobe *old_p;
+	struct kprobe *_p;
 
-	unoptimize_kprobe(p);	/* Try to unoptimize */
-	arch_disarm_kprobe(p);
+	unoptimize_kprobe(p, false);	/* Try to unoptimize */
 
-	/* If another kprobe was blocked, optimize it. */
-	old_p = get_optimized_kprobe((unsigned long)p->addr);
-	if (unlikely(old_p))
-		optimize_kprobe(old_p);
+	if (!kprobe_queued(p)) {
+		arch_disarm_kprobe(p);
+		/* If another kprobe was blocked, optimize it. */
+		_p = get_optimized_kprobe((unsigned long)p->addr);
+		if (unlikely(_p) && reopt)
+			optimize_kprobe(_p);
+	}
+	/* TODO: reoptimize others after unoptimized this probe */
 }
 
 #else /* !CONFIG_OPTPROBES */
 
 #define optimize_kprobe(p)			do {} while (0)
-#define unoptimize_kprobe(p)			do {} while (0)
+#define unoptimize_kprobe(p, f)			do {} while (0)
 #define kill_optimized_kprobe(p)		do {} while (0)
 #define prepare_optimized_kprobe(p)		do {} while (0)
 #define try_to_optimize_kprobe(p)		do {} while (0)
 #define __arm_kprobe(p)				arch_arm_kprobe(p)
-#define __disarm_kprobe(p)			arch_disarm_kprobe(p)
+#define __disarm_kprobe(p, o)			arch_disarm_kprobe(p)
+#define kprobe_disarmed(p)			kprobe_disabled(p)
+#define wait_for_kprobe_optimizer()		do {} while (0)
+
+/* There should be no unused kprobes can be reused without optimization */
+static void reuse_unused_kprobe(struct kprobe *ap)
+{
+	printk(KERN_ERR "Error: There should be no unused kprobe here.\n");
+	BUG_ON(kprobe_unused(ap));
+}
 
 static __kprobes void free_aggr_kprobe(struct kprobe *p)
 {
+	arch_remove_kprobe(p);
 	kfree(p);
 }
 
@@ -732,11 +923,10 @@ static void __kprobes arm_kprobe(struct kprobe *kp)
 /* Disarm a kprobe with text_mutex */
 static void __kprobes disarm_kprobe(struct kprobe *kp)
 {
-	get_online_cpus();	/* For avoiding text_mutex deadlock */
+	/* Ditto */
 	mutex_lock(&text_mutex);
-	__disarm_kprobe(kp);
+	__disarm_kprobe(kp, true);
 	mutex_unlock(&text_mutex);
-	put_online_cpus();
 }
 
 /*
@@ -775,7 +965,7 @@ static void __kprobes aggr_post_handler(struct kprobe *p, struct pt_regs *regs,
 static int __kprobes aggr_fault_handler(struct kprobe *p, struct pt_regs *regs,
 					int trapnr)
 {
-	struct kprobe *cur = __get_cpu_var(kprobe_instance);
+	struct kprobe *cur = __this_cpu_read(kprobe_instance);
 
 	/*
 	 * if we faulted "during" the execution of a user specified
@@ -790,7 +980,7 @@ static int __kprobes aggr_fault_handler(struct kprobe *p, struct pt_regs *regs,
 
 static int __kprobes aggr_break_handler(struct kprobe *p, struct pt_regs *regs)
 {
-	struct kprobe *cur = __get_cpu_var(kprobe_instance);
+	struct kprobe *cur = __this_cpu_read(kprobe_instance);
 	int ret = 0;
 
 	if (cur && cur->break_handler) {
@@ -942,7 +1132,7 @@ static int __kprobes add_new_kprobe(struct kprobe *ap, struct kprobe *p)
 	BUG_ON(kprobe_gone(ap) || kprobe_gone(p));
 
 	if (p->break_handler || p->post_handler)
-		unoptimize_kprobe(ap);	/* Fall back to normal kprobe */
+		unoptimize_kprobe(ap, true);	/* Fall back to normal kprobe */
 
 	if (p->break_handler) {
 		if (ap->break_handler)
@@ -993,19 +1183,21 @@ static void __kprobes init_aggr_kprobe(struct kprobe *ap, struct kprobe *p)
  * This is the second or subsequent kprobe at the address - handle
  * the intricacies
  */
-static int __kprobes register_aggr_kprobe(struct kprobe *old_p,
+static int __kprobes register_aggr_kprobe(struct kprobe *orig_p,
 					  struct kprobe *p)
 {
 	int ret = 0;
-	struct kprobe *ap = old_p;
+	struct kprobe *ap = orig_p;
 
-	if (!kprobe_aggrprobe(old_p)) {
-		/* If old_p is not an aggr_kprobe, create new aggr_kprobe. */
-		ap = alloc_aggr_kprobe(old_p);
+	if (!kprobe_aggrprobe(orig_p)) {
+		/* If orig_p is not an aggr_kprobe, create new aggr_kprobe. */
+		ap = alloc_aggr_kprobe(orig_p);
 		if (!ap)
 			return -ENOMEM;
-		init_aggr_kprobe(ap, old_p);
-	}
+		init_aggr_kprobe(ap, orig_p);
+	} else if (kprobe_unused(ap))
+		/* This probe is going to die. Rescue it */
+		reuse_unused_kprobe(ap);
 
 	if (kprobe_gone(ap)) {
 		/*
@@ -1039,23 +1231,6 @@ static int __kprobes register_aggr_kprobe(struct kprobe *old_p,
 	return add_new_kprobe(ap, p);
 }
 
-/* Try to disable aggr_kprobe, and return 1 if succeeded.*/
-static int __kprobes try_to_disable_aggr_kprobe(struct kprobe *p)
-{
-	struct kprobe *kp;
-
-	list_for_each_entry_rcu(kp, &p->list, list) {
-		if (!kprobe_disabled(kp))
-			/*
-			 * There is an active probe on the list.
-			 * We can't disable aggr_kprobe.
-			 */
-			return 0;
-	}
-	p->flags |= KPROBE_FLAG_DISABLED;
-	return 1;
-}
-
 static int __kprobes in_kprobes_functions(unsigned long addr)
 {
 	struct kprobe_blackpoint *kb;
@@ -1098,34 +1273,33 @@ static kprobe_opcode_t __kprobes *kprobe_addr(struct kprobe *p)
 /* Check passed kprobe is valid and return kprobe in kprobe_table. */
 static struct kprobe * __kprobes __get_valid_kprobe(struct kprobe *p)
 {
-	struct kprobe *old_p, *list_p;
+	struct kprobe *ap, *list_p;
 
-	old_p = get_kprobe(p->addr);
-	if (unlikely(!old_p))
+	ap = get_kprobe(p->addr);
+	if (unlikely(!ap))
 		return NULL;
 
-	if (p != old_p) {
-		list_for_each_entry_rcu(list_p, &old_p->list, list)
+	if (p != ap) {
+		list_for_each_entry_rcu(list_p, &ap->list, list)
 			if (list_p == p)
 			/* kprobe p is a valid probe */
 				goto valid;
 		return NULL;
 	}
 valid:
-	return old_p;
+	return ap;
 }
 
 /* Return error if the kprobe is being re-registered */
 static inline int check_kprobe_rereg(struct kprobe *p)
 {
 	int ret = 0;
-	struct kprobe *old_p;
 
 	mutex_lock(&kprobe_mutex);
-	old_p = __get_valid_kprobe(p);
-	if (old_p)
+	if (__get_valid_kprobe(p))
 		ret = -EINVAL;
 	mutex_unlock(&kprobe_mutex);
+
 	return ret;
 }
 
@@ -1229,67 +1403,121 @@ fail_with_jump_label:
 }
 EXPORT_SYMBOL_GPL(register_kprobe);
 
+/* Check if all probes on the aggrprobe are disabled */
+static int __kprobes aggr_kprobe_disabled(struct kprobe *ap)
+{
+	struct kprobe *kp;
+
+	list_for_each_entry_rcu(kp, &ap->list, list)
+		if (!kprobe_disabled(kp))
+			/*
+			 * There is an active probe on the list.
+			 * We can't disable this ap.
+			 */
+			return 0;
+
+	return 1;
+}
+
+/* Disable one kprobe: Make sure called under kprobe_mutex is locked */
+static struct kprobe *__kprobes __disable_kprobe(struct kprobe *p)
+{
+	struct kprobe *orig_p;
+
+	/* Get an original kprobe for return */
+	orig_p = __get_valid_kprobe(p);
+	if (unlikely(orig_p == NULL))
+		return NULL;
+
+	if (!kprobe_disabled(p)) {
+		/* Disable probe if it is a child probe */
+		if (p != orig_p)
+			p->flags |= KPROBE_FLAG_DISABLED;
+
+		/* Try to disarm and disable this/parent probe */
+		if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
+			disarm_kprobe(orig_p);
+			orig_p->flags |= KPROBE_FLAG_DISABLED;
+		}
+	}
+
+	return orig_p;
+}
+
 /*
  * Unregister a kprobe without a scheduler synchronization.
  */
 static int __kprobes __unregister_kprobe_top(struct kprobe *p)
 {
-	struct kprobe *old_p, *list_p;
+	struct kprobe *ap, *list_p;
 
-	old_p = __get_valid_kprobe(p);
-	if (old_p == NULL)
+	/* Disable kprobe. This will disarm it if needed. */
+	ap = __disable_kprobe(p);
+	if (ap == NULL)
 		return -EINVAL;
 
-	if (old_p == p ||
-	    (kprobe_aggrprobe(old_p) &&
-	     list_is_singular(&old_p->list))) {
+	if (ap == p)
 		/*
-		 * Only probe on the hash list. Disarm only if kprobes are
-		 * enabled and not gone - otherwise, the breakpoint would
-		 * already have been removed. We save on flushing icache.
+		 * This probe is an independent(and non-optimized) kprobe
+		 * (not an aggrprobe). Remove from the hash list.
 		 */
-		if (!kprobes_all_disarmed && !kprobe_disabled(old_p))
-			disarm_kprobe(old_p);
-		hlist_del_rcu(&old_p->hlist);
-	} else {
+		goto disarmed;
+
+	/* Following process expects this probe is an aggrprobe */
+	WARN_ON(!kprobe_aggrprobe(ap));
+
+	if (list_is_singular(&ap->list) && kprobe_disarmed(ap))
+		/*
+		 * !disarmed could be happen if the probe is under delayed
+		 * unoptimizing.
+		 */
+		goto disarmed;
+	else {
+		/* If disabling probe has special handlers, update aggrprobe */
 		if (p->break_handler && !kprobe_gone(p))
-			old_p->break_handler = NULL;
+			ap->break_handler = NULL;
 		if (p->post_handler && !kprobe_gone(p)) {
-			list_for_each_entry_rcu(list_p, &old_p->list, list) {
+			list_for_each_entry_rcu(list_p, &ap->list, list) {
 				if ((list_p != p) && (list_p->post_handler))
 					goto noclean;
 			}
-			old_p->post_handler = NULL;
+			ap->post_handler = NULL;
 		}
 noclean:
+		/*
+		 * Remove from the aggrprobe: this path will do nothing in
+		 * __unregister_kprobe_bottom().
+		 */
 		list_del_rcu(&p->list);
-		if (!kprobe_disabled(old_p)) {
-			try_to_disable_aggr_kprobe(old_p);
-			if (!kprobes_all_disarmed) {
-				if (kprobe_disabled(old_p))
-					disarm_kprobe(old_p);
-				else
-					/* Try to optimize this probe again */
-					optimize_kprobe(old_p);
-			}
-		}
+		if (!kprobe_disabled(ap) && !kprobes_all_disarmed)
+			/*
+			 * Try to optimize this probe again, because post
+			 * handler may have been changed.
+			 */
+			optimize_kprobe(ap);
 	}
 	return 0;
+
+disarmed:
+	BUG_ON(!kprobe_disarmed(ap));
+	hlist_del_rcu(&ap->hlist);
+	return 0;
 }
 
 static void __kprobes __unregister_kprobe_bottom(struct kprobe *p)
 {
-	struct kprobe *old_p;
+	struct kprobe *ap;
 
 	if (list_empty(&p->list))
+		/* This is an independent kprobe */
 		arch_remove_kprobe(p);
 	else if (list_is_singular(&p->list)) {
-		/* "p" is the last child of an aggr_kprobe */
-		old_p = list_entry(p->list.next, struct kprobe, list);
+		/* This is the last child of an aggrprobe */
+		ap = list_entry(p->list.next, struct kprobe, list);
 		list_del(&p->list);
-		arch_remove_kprobe(old_p);
-		free_aggr_kprobe(old_p);
+		free_aggr_kprobe(ap);
 	}
+	/* Otherwise, do nothing. */
 }
 
 int __kprobes register_kprobes(struct kprobe **kps, int num)
@@ -1607,29 +1835,13 @@ static void __kprobes kill_kprobe(struct kprobe *p)
 int __kprobes disable_kprobe(struct kprobe *kp)
 {
 	int ret = 0;
-	struct kprobe *p;
 
 	mutex_lock(&kprobe_mutex);
 
-	/* Check whether specified probe is valid. */
-	p = __get_valid_kprobe(kp);
-	if (unlikely(p == NULL)) {
+	/* Disable this kprobe */
+	if (__disable_kprobe(kp) == NULL)
 		ret = -EINVAL;
-		goto out;
-	}
 
-	/* If the probe is already disabled (or gone), just return */
-	if (kprobe_disabled(kp))
-		goto out;
-
-	kp->flags |= KPROBE_FLAG_DISABLED;
-	if (p != kp)
-		/* When kp != p, p is always enabled. */
-		try_to_disable_aggr_kprobe(p);
-
-	if (!kprobes_all_disarmed && kprobe_disabled(p))
-		disarm_kprobe(p);
-out:
 	mutex_unlock(&kprobe_mutex);
 	return ret;
 }
@@ -1927,36 +2139,27 @@ static void __kprobes disarm_all_kprobes(void)
 	mutex_lock(&kprobe_mutex);
 
 	/* If kprobes are already disarmed, just return */
-	if (kprobes_all_disarmed)
-		goto already_disabled;
+	if (kprobes_all_disarmed) {
+		mutex_unlock(&kprobe_mutex);
+		return;
+	}
 
 	kprobes_all_disarmed = true;
 	printk(KERN_INFO "Kprobes globally disabled\n");
 
-	/*
-	 * Here we call get_online_cpus() for avoiding text_mutex deadlock,
-	 * because disarming may also unoptimize kprobes.
-	 */
-	get_online_cpus();
 	mutex_lock(&text_mutex);
 	for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
 		head = &kprobe_table[i];
 		hlist_for_each_entry_rcu(p, node, head, hlist) {
 			if (!arch_trampoline_kprobe(p) && !kprobe_disabled(p))
-				__disarm_kprobe(p);
+				__disarm_kprobe(p, false);
 		}
 	}
-
 	mutex_unlock(&text_mutex);
-	put_online_cpus();
 	mutex_unlock(&kprobe_mutex);
-	/* Allow all currently running kprobes to complete */
-	synchronize_sched();
-	return;
 
-already_disabled:
-	mutex_unlock(&kprobe_mutex);
-	return;
+	/* Wait for disarming all kprobes by optimizer */
+	wait_for_kprobe_optimizer();
 }
 
 /*
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 2dc3786349d..c55afba990a 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -148,7 +148,7 @@ struct task_struct *kthread_create(int (*threadfn)(void *data),
 	wait_for_completion(&create.done);
 
 	if (!IS_ERR(create.result)) {
-		struct sched_param param = { .sched_priority = 0 };
+		static const struct sched_param param = { .sched_priority = 0 };
 		va_list args;
 
 		va_start(args, namefmt);
@@ -265,6 +265,17 @@ int kthreadd(void *unused)
 	return 0;
 }
 
+void __init_kthread_worker(struct kthread_worker *worker,
+				const char *name,
+				struct lock_class_key *key)
+{
+	spin_lock_init(&worker->lock);
+	lockdep_set_class_and_name(&worker->lock, key, name);
+	INIT_LIST_HEAD(&worker->work_list);
+	worker->task = NULL;
+}
+EXPORT_SYMBOL_GPL(__init_kthread_worker);
+
 /**
  * kthread_worker_fn - kthread function to process kthread_worker
  * @worker_ptr: pointer to initialized kthread_worker
diff --git a/kernel/latencytop.c b/kernel/latencytop.c
index 877fb306d41..17110a4a4fc 100644
--- a/kernel/latencytop.c
+++ b/kernel/latencytop.c
@@ -194,14 +194,7 @@ __account_scheduler_latency(struct task_struct *tsk, int usecs, int inter)
 
 	account_global_scheduler_latency(tsk, &lat);
 
-	/*
-	 * short term hack; if we're > 32 we stop; future we recycle:
-	 */
-	tsk->latency_record_count++;
-	if (tsk->latency_record_count >= LT_SAVECOUNT)
-		goto out_unlock;
-
-	for (i = 0; i < LT_SAVECOUNT; i++) {
+	for (i = 0; i < tsk->latency_record_count; i++) {
 		struct latency_record *mylat;
 		int same = 1;
 
@@ -227,8 +220,14 @@ __account_scheduler_latency(struct task_struct *tsk, int usecs, int inter)
 		}
 	}
 
+	/*
+	 * short term hack; if we're > 32 we stop; future we recycle:
+	 */
+	if (tsk->latency_record_count >= LT_SAVECOUNT)
+		goto out_unlock;
+
 	/* Allocated a new one: */
-	i = tsk->latency_record_count;
+	i = tsk->latency_record_count++;
 	memcpy(&tsk->latency_record[i], &lat, sizeof(struct latency_record));
 
 out_unlock:
diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c
index 59b76c8ce9d..1969d2fc4b3 100644
--- a/kernel/lockdep_proc.c
+++ b/kernel/lockdep_proc.c
@@ -494,7 +494,6 @@ static void seq_stats(struct seq_file *m, struct lock_stat_data *data)
 		namelen += 2;
 
 	for (i = 0; i < LOCKSTAT_POINTS; i++) {
-		char sym[KSYM_SYMBOL_LEN];
 		char ip[32];
 
 		if (class->contention_point[i] == 0)
@@ -503,15 +502,13 @@ static void seq_stats(struct seq_file *m, struct lock_stat_data *data)
 		if (!i)
 			seq_line(m, '-', 40-namelen, namelen);
 
-		sprint_symbol(sym, class->contention_point[i]);
 		snprintf(ip, sizeof(ip), "[<%p>]",
 				(void *)class->contention_point[i]);
-		seq_printf(m, "%40s %14lu %29s %s\n", name,
-				stats->contention_point[i],
-				ip, sym);
+		seq_printf(m, "%40s %14lu %29s %pS\n",
+			   name, stats->contention_point[i],
+			   ip, (void *)class->contention_point[i]);
 	}
 	for (i = 0; i < LOCKSTAT_POINTS; i++) {
-		char sym[KSYM_SYMBOL_LEN];
 		char ip[32];
 
 		if (class->contending_point[i] == 0)
@@ -520,12 +517,11 @@ static void seq_stats(struct seq_file *m, struct lock_stat_data *data)
 		if (!i)
 			seq_line(m, '-', 40-namelen, namelen);
 
-		sprint_symbol(sym, class->contending_point[i]);
 		snprintf(ip, sizeof(ip), "[<%p>]",
 				(void *)class->contending_point[i]);
-		seq_printf(m, "%40s %14lu %29s %s\n", name,
-				stats->contending_point[i],
-				ip, sym);
+		seq_printf(m, "%40s %14lu %29s %pS\n",
+			   name, stats->contending_point[i],
+			   ip, (void *)class->contending_point[i]);
 	}
 	if (i) {
 		seq_puts(m, "\n");
diff --git a/kernel/module.c b/kernel/module.c
index 437a74a7524..34e00b708fa 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -56,6 +56,7 @@
 #include <linux/percpu.h>
 #include <linux/kmemleak.h>
 #include <linux/jump_label.h>
+#include <linux/pfn.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/module.h>
@@ -70,6 +71,26 @@
 #define ARCH_SHF_SMALL 0
 #endif
 
+/*
+ * Modules' sections will be aligned on page boundaries
+ * to ensure complete separation of code and data, but
+ * only when CONFIG_DEBUG_SET_MODULE_RONX=y
+ */
+#ifdef CONFIG_DEBUG_SET_MODULE_RONX
+# define debug_align(X) ALIGN(X, PAGE_SIZE)
+#else
+# define debug_align(X) (X)
+#endif
+
+/*
+ * Given BASE and SIZE this macro calculates the number of pages the
+ * memory regions occupies
+ */
+#define MOD_NUMBER_OF_PAGES(BASE, SIZE) (((SIZE) > 0) ?		\
+		(PFN_DOWN((unsigned long)(BASE) + (SIZE) - 1) -	\
+			 PFN_DOWN((unsigned long)BASE) + 1)	\
+		: (0UL))
+
 /* If this is set, the section belongs in the init part of the module */
 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
 
@@ -1542,6 +1563,115 @@ static int __unlink_module(void *_mod)
 	return 0;
 }
 
+#ifdef CONFIG_DEBUG_SET_MODULE_RONX
+/*
+ * LKM RO/NX protection: protect module's text/ro-data
+ * from modification and any data from execution.
+ */
+void set_page_attributes(void *start, void *end, int (*set)(unsigned long start, int num_pages))
+{
+	unsigned long begin_pfn = PFN_DOWN((unsigned long)start);
+	unsigned long end_pfn = PFN_DOWN((unsigned long)end);
+
+	if (end_pfn > begin_pfn)
+		set(begin_pfn << PAGE_SHIFT, end_pfn - begin_pfn);
+}
+
+static void set_section_ro_nx(void *base,
+			unsigned long text_size,
+			unsigned long ro_size,
+			unsigned long total_size)
+{
+	/* begin and end PFNs of the current subsection */
+	unsigned long begin_pfn;
+	unsigned long end_pfn;
+
+	/*
+	 * Set RO for module text and RO-data:
+	 * - Always protect first page.
+	 * - Do not protect last partial page.
+	 */
+	if (ro_size > 0)
+		set_page_attributes(base, base + ro_size, set_memory_ro);
+
+	/*
+	 * Set NX permissions for module data:
+	 * - Do not protect first partial page.
+	 * - Always protect last page.
+	 */
+	if (total_size > text_size) {
+		begin_pfn = PFN_UP((unsigned long)base + text_size);
+		end_pfn = PFN_UP((unsigned long)base + total_size);
+		if (end_pfn > begin_pfn)
+			set_memory_nx(begin_pfn << PAGE_SHIFT, end_pfn - begin_pfn);
+	}
+}
+
+/* Setting memory back to RW+NX before releasing it */
+void unset_section_ro_nx(struct module *mod, void *module_region)
+{
+	unsigned long total_pages;
+
+	if (mod->module_core == module_region) {
+		/* Set core as NX+RW */
+		total_pages = MOD_NUMBER_OF_PAGES(mod->module_core, mod->core_size);
+		set_memory_nx((unsigned long)mod->module_core, total_pages);
+		set_memory_rw((unsigned long)mod->module_core, total_pages);
+
+	} else if (mod->module_init == module_region) {
+		/* Set init as NX+RW */
+		total_pages = MOD_NUMBER_OF_PAGES(mod->module_init, mod->init_size);
+		set_memory_nx((unsigned long)mod->module_init, total_pages);
+		set_memory_rw((unsigned long)mod->module_init, total_pages);
+	}
+}
+
+/* Iterate through all modules and set each module's text as RW */
+void set_all_modules_text_rw()
+{
+	struct module *mod;
+
+	mutex_lock(&module_mutex);
+	list_for_each_entry_rcu(mod, &modules, list) {
+		if ((mod->module_core) && (mod->core_text_size)) {
+			set_page_attributes(mod->module_core,
+						mod->module_core + mod->core_text_size,
+						set_memory_rw);
+		}
+		if ((mod->module_init) && (mod->init_text_size)) {
+			set_page_attributes(mod->module_init,
+						mod->module_init + mod->init_text_size,
+						set_memory_rw);
+		}
+	}
+	mutex_unlock(&module_mutex);
+}
+
+/* Iterate through all modules and set each module's text as RO */
+void set_all_modules_text_ro()
+{
+	struct module *mod;
+
+	mutex_lock(&module_mutex);
+	list_for_each_entry_rcu(mod, &modules, list) {
+		if ((mod->module_core) && (mod->core_text_size)) {
+			set_page_attributes(mod->module_core,
+						mod->module_core + mod->core_text_size,
+						set_memory_ro);
+		}
+		if ((mod->module_init) && (mod->init_text_size)) {
+			set_page_attributes(mod->module_init,
+						mod->module_init + mod->init_text_size,
+						set_memory_ro);
+		}
+	}
+	mutex_unlock(&module_mutex);
+}
+#else
+static inline void set_section_ro_nx(void *base, unsigned long text_size, unsigned long ro_size, unsigned long total_size) { }
+static inline void unset_section_ro_nx(struct module *mod, void *module_region) { }
+#endif
+
 /* Free a module, remove from lists, etc. */
 static void free_module(struct module *mod)
 {
@@ -1566,6 +1696,7 @@ static void free_module(struct module *mod)
 	destroy_params(mod->kp, mod->num_kp);
 
 	/* This may be NULL, but that's OK */
+	unset_section_ro_nx(mod, mod->module_init);
 	module_free(mod, mod->module_init);
 	kfree(mod->args);
 	percpu_modfree(mod);
@@ -1574,6 +1705,7 @@ static void free_module(struct module *mod)
 	lockdep_free_key_range(mod->module_core, mod->core_size);
 
 	/* Finally, free the core (containing the module structure) */
+	unset_section_ro_nx(mod, mod->module_core);
 	module_free(mod, mod->module_core);
 
 #ifdef CONFIG_MPU
@@ -1777,8 +1909,19 @@ static void layout_sections(struct module *mod, struct load_info *info)
 			s->sh_entsize = get_offset(mod, &mod->core_size, s, i);
 			DEBUGP("\t%s\n", name);
 		}
-		if (m == 0)
+		switch (m) {
+		case 0: /* executable */
+			mod->core_size = debug_align(mod->core_size);
 			mod->core_text_size = mod->core_size;
+			break;
+		case 1: /* RO: text and ro-data */
+			mod->core_size = debug_align(mod->core_size);
+			mod->core_ro_size = mod->core_size;
+			break;
+		case 3: /* whole core */
+			mod->core_size = debug_align(mod->core_size);
+			break;
+		}
 	}
 
 	DEBUGP("Init section allocation order:\n");
@@ -1796,8 +1939,19 @@ static void layout_sections(struct module *mod, struct load_info *info)
 					 | INIT_OFFSET_MASK);
 			DEBUGP("\t%s\n", sname);
 		}
-		if (m == 0)
+		switch (m) {
+		case 0: /* executable */
+			mod->init_size = debug_align(mod->init_size);
 			mod->init_text_size = mod->init_size;
+			break;
+		case 1: /* RO: text and ro-data */
+			mod->init_size = debug_align(mod->init_size);
+			mod->init_ro_size = mod->init_size;
+			break;
+		case 3: /* whole init */
+			mod->init_size = debug_align(mod->init_size);
+			break;
+		}
 	}
 }
 
@@ -2326,6 +2480,18 @@ static void find_module_sections(struct module *mod, struct load_info *info)
 	kmemleak_scan_area(mod->trace_events, sizeof(*mod->trace_events) *
 			   mod->num_trace_events, GFP_KERNEL);
 #endif
+#ifdef CONFIG_TRACING
+	mod->trace_bprintk_fmt_start = section_objs(info, "__trace_printk_fmt",
+					 sizeof(*mod->trace_bprintk_fmt_start),
+					 &mod->num_trace_bprintk_fmt);
+	/*
+	 * This section contains pointers to allocated objects in the trace
+	 * code and not scanning it leads to false positives.
+	 */
+	kmemleak_scan_area(mod->trace_bprintk_fmt_start,
+			   sizeof(*mod->trace_bprintk_fmt_start) *
+			   mod->num_trace_bprintk_fmt, GFP_KERNEL);
+#endif
 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
 	/* sechdrs[0].sh_size is always zero */
 	mod->ftrace_callsites = section_objs(info, "__mcount_loc",
@@ -2710,6 +2876,18 @@ SYSCALL_DEFINE3(init_module, void __user *, umod,
 	blocking_notifier_call_chain(&module_notify_list,
 			MODULE_STATE_COMING, mod);
 
+	/* Set RO and NX regions for core */
+	set_section_ro_nx(mod->module_core,
+				mod->core_text_size,
+				mod->core_ro_size,
+				mod->core_size);
+
+	/* Set RO and NX regions for init */
+	set_section_ro_nx(mod->module_init,
+				mod->init_text_size,
+				mod->init_ro_size,
+				mod->init_size);
+
 	do_mod_ctors(mod);
 	/* Start the module */
 	if (mod->init != NULL)
@@ -2753,6 +2931,7 @@ SYSCALL_DEFINE3(init_module, void __user *, umod,
 	mod->symtab = mod->core_symtab;
 	mod->strtab = mod->core_strtab;
 #endif
+	unset_section_ro_nx(mod, mod->module_init);
 	module_free(mod, mod->module_init);
 	mod->module_init = NULL;
 	mod->init_size = 0;
diff --git a/kernel/mutex.c b/kernel/mutex.c
index 200407c1502..a5889fb28ec 100644
--- a/kernel/mutex.c
+++ b/kernel/mutex.c
@@ -199,7 +199,7 @@ __mutex_lock_common(struct mutex *lock, long state, unsigned int subclass,
 		 * memory barriers as we'll eventually observe the right
 		 * values at the cost of a few extra spins.
 		 */
-		cpu_relax();
+		arch_mutex_cpu_relax();
 	}
 #endif
 	spin_lock_mutex(&lock->wait_lock, flags);
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 517d827f498..11847bf1e8c 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
+#include <linux/idr.h>
 #include <linux/file.h>
 #include <linux/poll.h>
 #include <linux/slab.h>
@@ -21,7 +22,9 @@
 #include <linux/dcache.h>
 #include <linux/percpu.h>
 #include <linux/ptrace.h>
+#include <linux/reboot.h>
 #include <linux/vmstat.h>
+#include <linux/device.h>
 #include <linux/vmalloc.h>
 #include <linux/hardirq.h>
 #include <linux/rculist.h>
@@ -31,6 +34,7 @@
 #include <linux/kernel_stat.h>
 #include <linux/perf_event.h>
 #include <linux/ftrace_event.h>
+#include <linux/hw_breakpoint.h>
 
 #include <asm/irq_regs.h>
 
@@ -132,6 +136,28 @@ static void unclone_ctx(struct perf_event_context *ctx)
 	}
 }
 
+static u32 perf_event_pid(struct perf_event *event, struct task_struct *p)
+{
+	/*
+	 * only top level events have the pid namespace they were created in
+	 */
+	if (event->parent)
+		event = event->parent;
+
+	return task_tgid_nr_ns(p, event->ns);
+}
+
+static u32 perf_event_tid(struct perf_event *event, struct task_struct *p)
+{
+	/*
+	 * only top level events have the pid namespace they were created in
+	 */
+	if (event->parent)
+		event = event->parent;
+
+	return task_pid_nr_ns(p, event->ns);
+}
+
 /*
  * If we inherit events we want to return the parent event id
  * to userspace.
@@ -311,9 +337,84 @@ list_add_event(struct perf_event *event, struct perf_event_context *ctx)
 		ctx->nr_stat++;
 }
 
+/*
+ * Called at perf_event creation and when events are attached/detached from a
+ * group.
+ */
+static void perf_event__read_size(struct perf_event *event)
+{
+	int entry = sizeof(u64); /* value */
+	int size = 0;
+	int nr = 1;
+
+	if (event->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
+		size += sizeof(u64);
+
+	if (event->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
+		size += sizeof(u64);
+
+	if (event->attr.read_format & PERF_FORMAT_ID)
+		entry += sizeof(u64);
+
+	if (event->attr.read_format & PERF_FORMAT_GROUP) {
+		nr += event->group_leader->nr_siblings;
+		size += sizeof(u64);
+	}
+
+	size += entry * nr;
+	event->read_size = size;
+}
+
+static void perf_event__header_size(struct perf_event *event)
+{
+	struct perf_sample_data *data;
+	u64 sample_type = event->attr.sample_type;
+	u16 size = 0;
+
+	perf_event__read_size(event);
+
+	if (sample_type & PERF_SAMPLE_IP)
+		size += sizeof(data->ip);
+
+	if (sample_type & PERF_SAMPLE_ADDR)
+		size += sizeof(data->addr);
+
+	if (sample_type & PERF_SAMPLE_PERIOD)
+		size += sizeof(data->period);
+
+	if (sample_type & PERF_SAMPLE_READ)
+		size += event->read_size;
+
+	event->header_size = size;
+}
+
+static void perf_event__id_header_size(struct perf_event *event)
+{
+	struct perf_sample_data *data;
+	u64 sample_type = event->attr.sample_type;
+	u16 size = 0;
+
+	if (sample_type & PERF_SAMPLE_TID)
+		size += sizeof(data->tid_entry);
+
+	if (sample_type & PERF_SAMPLE_TIME)
+		size += sizeof(data->time);
+
+	if (sample_type & PERF_SAMPLE_ID)
+		size += sizeof(data->id);
+
+	if (sample_type & PERF_SAMPLE_STREAM_ID)
+		size += sizeof(data->stream_id);
+
+	if (sample_type & PERF_SAMPLE_CPU)
+		size += sizeof(data->cpu_entry);
+
+	event->id_header_size = size;
+}
+
 static void perf_group_attach(struct perf_event *event)
 {
-	struct perf_event *group_leader = event->group_leader;
+	struct perf_event *group_leader = event->group_leader, *pos;
 
 	/*
 	 * We can have double attach due to group movement in perf_event_open.
@@ -332,6 +433,11 @@ static void perf_group_attach(struct perf_event *event)
 
 	list_add_tail(&event->group_entry, &group_leader->sibling_list);
 	group_leader->nr_siblings++;
+
+	perf_event__header_size(group_leader);
+
+	list_for_each_entry(pos, &group_leader->sibling_list, group_entry)
+		perf_event__header_size(pos);
 }
 
 /*
@@ -390,7 +496,7 @@ static void perf_group_detach(struct perf_event *event)
 	if (event->group_leader != event) {
 		list_del_init(&event->group_entry);
 		event->group_leader->nr_siblings--;
-		return;
+		goto out;
 	}
 
 	if (!list_empty(&event->group_entry))
@@ -409,6 +515,12 @@ static void perf_group_detach(struct perf_event *event)
 		/* Inherit group flags from the previous leader */
 		sibling->group_flags = event->group_flags;
 	}
+
+out:
+	perf_event__header_size(event->group_leader);
+
+	list_for_each_entry(tmp, &event->group_leader->sibling_list, group_entry)
+		perf_event__header_size(tmp);
 }
 
 static inline int
@@ -674,6 +786,8 @@ event_sched_in(struct perf_event *event,
 
 	event->tstamp_running += ctx->time - event->tstamp_stopped;
 
+	event->shadow_ctx_time = ctx->time - ctx->timestamp;
+
 	if (!is_software_event(event))
 		cpuctx->active_oncpu++;
 	ctx->nr_active++;
@@ -1070,7 +1184,7 @@ static int perf_event_refresh(struct perf_event *event, int refresh)
 	/*
 	 * not supported on inherited events
 	 */
-	if (event->attr.inherit)
+	if (event->attr.inherit || !is_sampling_event(event))
 		return -EINVAL;
 
 	atomic_add(refresh, &event->event_limit);
@@ -1284,8 +1398,6 @@ void __perf_event_task_sched_out(struct task_struct *task,
 {
 	int ctxn;
 
-	perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
-
 	for_each_task_context_nr(ctxn)
 		perf_event_context_sched_out(task, ctxn, next);
 }
@@ -1619,8 +1731,12 @@ static void rotate_ctx(struct perf_event_context *ctx)
 {
 	raw_spin_lock(&ctx->lock);
 
-	/* Rotate the first entry last of non-pinned groups */
-	list_rotate_left(&ctx->flexible_groups);
+	/*
+	 * Rotate the first entry last of non-pinned groups. Rotation might be
+	 * disabled by the inheritance code.
+	 */
+	if (!ctx->rotate_disable)
+		list_rotate_left(&ctx->flexible_groups);
 
 	raw_spin_unlock(&ctx->lock);
 }
@@ -2232,11 +2348,6 @@ int perf_event_release_kernel(struct perf_event *event)
 	raw_spin_unlock_irq(&ctx->lock);
 	mutex_unlock(&ctx->mutex);
 
-	mutex_lock(&event->owner->perf_event_mutex);
-	list_del_init(&event->owner_entry);
-	mutex_unlock(&event->owner->perf_event_mutex);
-	put_task_struct(event->owner);
-
 	free_event(event);
 
 	return 0;
@@ -2249,35 +2360,44 @@ EXPORT_SYMBOL_GPL(perf_event_release_kernel);
 static int perf_release(struct inode *inode, struct file *file)
 {
 	struct perf_event *event = file->private_data;
+	struct task_struct *owner;
 
 	file->private_data = NULL;
 
-	return perf_event_release_kernel(event);
-}
-
-static int perf_event_read_size(struct perf_event *event)
-{
-	int entry = sizeof(u64); /* value */
-	int size = 0;
-	int nr = 1;
-
-	if (event->attr.read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
-		size += sizeof(u64);
-
-	if (event->attr.read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
-		size += sizeof(u64);
-
-	if (event->attr.read_format & PERF_FORMAT_ID)
-		entry += sizeof(u64);
-
-	if (event->attr.read_format & PERF_FORMAT_GROUP) {
-		nr += event->group_leader->nr_siblings;
-		size += sizeof(u64);
+	rcu_read_lock();
+	owner = ACCESS_ONCE(event->owner);
+	/*
+	 * Matches the smp_wmb() in perf_event_exit_task(). If we observe
+	 * !owner it means the list deletion is complete and we can indeed
+	 * free this event, otherwise we need to serialize on
+	 * owner->perf_event_mutex.
+	 */
+	smp_read_barrier_depends();
+	if (owner) {
+		/*
+		 * Since delayed_put_task_struct() also drops the last
+		 * task reference we can safely take a new reference
+		 * while holding the rcu_read_lock().
+		 */
+		get_task_struct(owner);
 	}
+	rcu_read_unlock();
 
-	size += entry * nr;
+	if (owner) {
+		mutex_lock(&owner->perf_event_mutex);
+		/*
+		 * We have to re-check the event->owner field, if it is cleared
+		 * we raced with perf_event_exit_task(), acquiring the mutex
+		 * ensured they're done, and we can proceed with freeing the
+		 * event.
+		 */
+		if (event->owner)
+			list_del_init(&event->owner_entry);
+		mutex_unlock(&owner->perf_event_mutex);
+		put_task_struct(owner);
+	}
 
-	return size;
+	return perf_event_release_kernel(event);
 }
 
 u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running)
@@ -2394,7 +2514,7 @@ perf_read_hw(struct perf_event *event, char __user *buf, size_t count)
 	if (event->state == PERF_EVENT_STATE_ERROR)
 		return 0;
 
-	if (count < perf_event_read_size(event))
+	if (count < event->read_size)
 		return -ENOSPC;
 
 	WARN_ON_ONCE(event->ctx->parent_ctx);
@@ -2480,7 +2600,7 @@ static int perf_event_period(struct perf_event *event, u64 __user *arg)
 	int ret = 0;
 	u64 value;
 
-	if (!event->attr.sample_period)
+	if (!is_sampling_event(event))
 		return -EINVAL;
 
 	if (copy_from_user(&value, arg, sizeof(value)))
@@ -3271,6 +3391,73 @@ __always_inline void perf_output_copy(struct perf_output_handle *handle,
 	} while (len);
 }
 
+static void __perf_event_header__init_id(struct perf_event_header *header,
+					 struct perf_sample_data *data,
+					 struct perf_event *event)
+{
+	u64 sample_type = event->attr.sample_type;
+
+	data->type = sample_type;
+	header->size += event->id_header_size;
+
+	if (sample_type & PERF_SAMPLE_TID) {
+		/* namespace issues */
+		data->tid_entry.pid = perf_event_pid(event, current);
+		data->tid_entry.tid = perf_event_tid(event, current);
+	}
+
+	if (sample_type & PERF_SAMPLE_TIME)
+		data->time = perf_clock();
+
+	if (sample_type & PERF_SAMPLE_ID)
+		data->id = primary_event_id(event);
+
+	if (sample_type & PERF_SAMPLE_STREAM_ID)
+		data->stream_id = event->id;
+
+	if (sample_type & PERF_SAMPLE_CPU) {
+		data->cpu_entry.cpu	 = raw_smp_processor_id();
+		data->cpu_entry.reserved = 0;
+	}
+}
+
+static void perf_event_header__init_id(struct perf_event_header *header,
+				       struct perf_sample_data *data,
+				       struct perf_event *event)
+{
+	if (event->attr.sample_id_all)
+		__perf_event_header__init_id(header, data, event);
+}
+
+static void __perf_event__output_id_sample(struct perf_output_handle *handle,
+					   struct perf_sample_data *data)
+{
+	u64 sample_type = data->type;
+
+	if (sample_type & PERF_SAMPLE_TID)
+		perf_output_put(handle, data->tid_entry);
+
+	if (sample_type & PERF_SAMPLE_TIME)
+		perf_output_put(handle, data->time);
+
+	if (sample_type & PERF_SAMPLE_ID)
+		perf_output_put(handle, data->id);
+
+	if (sample_type & PERF_SAMPLE_STREAM_ID)
+		perf_output_put(handle, data->stream_id);
+
+	if (sample_type & PERF_SAMPLE_CPU)
+		perf_output_put(handle, data->cpu_entry);
+}
+
+static void perf_event__output_id_sample(struct perf_event *event,
+					 struct perf_output_handle *handle,
+					 struct perf_sample_data *sample)
+{
+	if (event->attr.sample_id_all)
+		__perf_event__output_id_sample(handle, sample);
+}
+
 int perf_output_begin(struct perf_output_handle *handle,
 		      struct perf_event *event, unsigned int size,
 		      int nmi, int sample)
@@ -3278,6 +3465,7 @@ int perf_output_begin(struct perf_output_handle *handle,
 	struct perf_buffer *buffer;
 	unsigned long tail, offset, head;
 	int have_lost;
+	struct perf_sample_data sample_data;
 	struct {
 		struct perf_event_header header;
 		u64			 id;
@@ -3304,8 +3492,12 @@ int perf_output_begin(struct perf_output_handle *handle,
 		goto out;
 
 	have_lost = local_read(&buffer->lost);
-	if (have_lost)
-		size += sizeof(lost_event);
+	if (have_lost) {
+		lost_event.header.size = sizeof(lost_event);
+		perf_event_header__init_id(&lost_event.header, &sample_data,
+					   event);
+		size += lost_event.header.size;
+	}
 
 	perf_output_get_handle(handle);
 
@@ -3336,11 +3528,11 @@ int perf_output_begin(struct perf_output_handle *handle,
 	if (have_lost) {
 		lost_event.header.type = PERF_RECORD_LOST;
 		lost_event.header.misc = 0;
-		lost_event.header.size = sizeof(lost_event);
 		lost_event.id          = event->id;
 		lost_event.lost        = local_xchg(&buffer->lost, 0);
 
 		perf_output_put(handle, lost_event);
+		perf_event__output_id_sample(event, handle, &sample_data);
 	}
 
 	return 0;
@@ -3373,30 +3565,9 @@ void perf_output_end(struct perf_output_handle *handle)
 	rcu_read_unlock();
 }
 
-static u32 perf_event_pid(struct perf_event *event, struct task_struct *p)
-{
-	/*
-	 * only top level events have the pid namespace they were created in
-	 */
-	if (event->parent)
-		event = event->parent;
-
-	return task_tgid_nr_ns(p, event->ns);
-}
-
-static u32 perf_event_tid(struct perf_event *event, struct task_struct *p)
-{
-	/*
-	 * only top level events have the pid namespace they were created in
-	 */
-	if (event->parent)
-		event = event->parent;
-
-	return task_pid_nr_ns(p, event->ns);
-}
-
 static void perf_output_read_one(struct perf_output_handle *handle,
-				 struct perf_event *event)
+				 struct perf_event *event,
+				 u64 enabled, u64 running)
 {
 	u64 read_format = event->attr.read_format;
 	u64 values[4];
@@ -3404,11 +3575,11 @@ static void perf_output_read_one(struct perf_output_handle *handle,
 
 	values[n++] = perf_event_count(event);
 	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED) {
-		values[n++] = event->total_time_enabled +
+		values[n++] = enabled +
 			atomic64_read(&event->child_total_time_enabled);
 	}
 	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING) {
-		values[n++] = event->total_time_running +
+		values[n++] = running +
 			atomic64_read(&event->child_total_time_running);
 	}
 	if (read_format & PERF_FORMAT_ID)
@@ -3421,7 +3592,8 @@ static void perf_output_read_one(struct perf_output_handle *handle,
  * XXX PERF_FORMAT_GROUP vs inherited events seems difficult.
  */
 static void perf_output_read_group(struct perf_output_handle *handle,
-			    struct perf_event *event)
+			    struct perf_event *event,
+			    u64 enabled, u64 running)
 {
 	struct perf_event *leader = event->group_leader, *sub;
 	u64 read_format = event->attr.read_format;
@@ -3431,10 +3603,10 @@ static void perf_output_read_group(struct perf_output_handle *handle,
 	values[n++] = 1 + leader->nr_siblings;
 
 	if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
-		values[n++] = leader->total_time_enabled;
+		values[n++] = enabled;
 
 	if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
-		values[n++] = leader->total_time_running;
+		values[n++] = running;
 
 	if (leader != event)
 		leader->pmu->read(leader);
@@ -3459,13 +3631,35 @@ static void perf_output_read_group(struct perf_output_handle *handle,
 	}
 }
 
+#define PERF_FORMAT_TOTAL_TIMES (PERF_FORMAT_TOTAL_TIME_ENABLED|\
+				 PERF_FORMAT_TOTAL_TIME_RUNNING)
+
 static void perf_output_read(struct perf_output_handle *handle,
 			     struct perf_event *event)
 {
+	u64 enabled = 0, running = 0, now, ctx_time;
+	u64 read_format = event->attr.read_format;
+
+	/*
+	 * compute total_time_enabled, total_time_running
+	 * based on snapshot values taken when the event
+	 * was last scheduled in.
+	 *
+	 * we cannot simply called update_context_time()
+	 * because of locking issue as we are called in
+	 * NMI context
+	 */
+	if (read_format & PERF_FORMAT_TOTAL_TIMES) {
+		now = perf_clock();
+		ctx_time = event->shadow_ctx_time + now;
+		enabled = ctx_time - event->tstamp_enabled;
+		running = ctx_time - event->tstamp_running;
+	}
+
 	if (event->attr.read_format & PERF_FORMAT_GROUP)
-		perf_output_read_group(handle, event);
+		perf_output_read_group(handle, event, enabled, running);
 	else
-		perf_output_read_one(handle, event);
+		perf_output_read_one(handle, event, enabled, running);
 }
 
 void perf_output_sample(struct perf_output_handle *handle,
@@ -3545,61 +3739,16 @@ void perf_prepare_sample(struct perf_event_header *header,
 {
 	u64 sample_type = event->attr.sample_type;
 
-	data->type = sample_type;
-
 	header->type = PERF_RECORD_SAMPLE;
-	header->size = sizeof(*header);
+	header->size = sizeof(*header) + event->header_size;
 
 	header->misc = 0;
 	header->misc |= perf_misc_flags(regs);
 
-	if (sample_type & PERF_SAMPLE_IP) {
-		data->ip = perf_instruction_pointer(regs);
-
-		header->size += sizeof(data->ip);
-	}
-
-	if (sample_type & PERF_SAMPLE_TID) {
-		/* namespace issues */
-		data->tid_entry.pid = perf_event_pid(event, current);
-		data->tid_entry.tid = perf_event_tid(event, current);
-
-		header->size += sizeof(data->tid_entry);
-	}
-
-	if (sample_type & PERF_SAMPLE_TIME) {
-		data->time = perf_clock();
-
-		header->size += sizeof(data->time);
-	}
-
-	if (sample_type & PERF_SAMPLE_ADDR)
-		header->size += sizeof(data->addr);
-
-	if (sample_type & PERF_SAMPLE_ID) {
-		data->id = primary_event_id(event);
-
-		header->size += sizeof(data->id);
-	}
-
-	if (sample_type & PERF_SAMPLE_STREAM_ID) {
-		data->stream_id = event->id;
+	__perf_event_header__init_id(header, data, event);
 
-		header->size += sizeof(data->stream_id);
-	}
-
-	if (sample_type & PERF_SAMPLE_CPU) {
-		data->cpu_entry.cpu		= raw_smp_processor_id();
-		data->cpu_entry.reserved	= 0;
-
-		header->size += sizeof(data->cpu_entry);
-	}
-
-	if (sample_type & PERF_SAMPLE_PERIOD)
-		header->size += sizeof(data->period);
-
-	if (sample_type & PERF_SAMPLE_READ)
-		header->size += perf_event_read_size(event);
+	if (sample_type & PERF_SAMPLE_IP)
+		data->ip = perf_instruction_pointer(regs);
 
 	if (sample_type & PERF_SAMPLE_CALLCHAIN) {
 		int size = 1;
@@ -3664,23 +3813,26 @@ perf_event_read_event(struct perf_event *event,
 			struct task_struct *task)
 {
 	struct perf_output_handle handle;
+	struct perf_sample_data sample;
 	struct perf_read_event read_event = {
 		.header = {
 			.type = PERF_RECORD_READ,
 			.misc = 0,
-			.size = sizeof(read_event) + perf_event_read_size(event),
+			.size = sizeof(read_event) + event->read_size,
 		},
 		.pid = perf_event_pid(event, task),
 		.tid = perf_event_tid(event, task),
 	};
 	int ret;
 
+	perf_event_header__init_id(&read_event.header, &sample, event);
 	ret = perf_output_begin(&handle, event, read_event.header.size, 0, 0);
 	if (ret)
 		return;
 
 	perf_output_put(&handle, read_event);
 	perf_output_read(&handle, event);
+	perf_event__output_id_sample(event, &handle, &sample);
 
 	perf_output_end(&handle);
 }
@@ -3710,14 +3862,16 @@ static void perf_event_task_output(struct perf_event *event,
 				     struct perf_task_event *task_event)
 {
 	struct perf_output_handle handle;
+	struct perf_sample_data	sample;
 	struct task_struct *task = task_event->task;
-	int size, ret;
+	int ret, size = task_event->event_id.header.size;
 
-	size  = task_event->event_id.header.size;
-	ret = perf_output_begin(&handle, event, size, 0, 0);
+	perf_event_header__init_id(&task_event->event_id.header, &sample, event);
 
+	ret = perf_output_begin(&handle, event,
+				task_event->event_id.header.size, 0, 0);
 	if (ret)
-		return;
+		goto out;
 
 	task_event->event_id.pid = perf_event_pid(event, task);
 	task_event->event_id.ppid = perf_event_pid(event, current);
@@ -3727,7 +3881,11 @@ static void perf_event_task_output(struct perf_event *event,
 
 	perf_output_put(&handle, task_event->event_id);
 
+	perf_event__output_id_sample(event, &handle, &sample);
+
 	perf_output_end(&handle);
+out:
+	task_event->event_id.header.size = size;
 }
 
 static int perf_event_task_match(struct perf_event *event)
@@ -3766,6 +3924,8 @@ static void perf_event_task_event(struct perf_task_event *task_event)
 	rcu_read_lock();
 	list_for_each_entry_rcu(pmu, &pmus, entry) {
 		cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+		if (cpuctx->active_pmu != pmu)
+			goto next;
 		perf_event_task_ctx(&cpuctx->ctx, task_event);
 
 		ctx = task_event->task_ctx;
@@ -3840,11 +4000,16 @@ static void perf_event_comm_output(struct perf_event *event,
 				     struct perf_comm_event *comm_event)
 {
 	struct perf_output_handle handle;
+	struct perf_sample_data sample;
 	int size = comm_event->event_id.header.size;
-	int ret = perf_output_begin(&handle, event, size, 0, 0);
+	int ret;
+
+	perf_event_header__init_id(&comm_event->event_id.header, &sample, event);
+	ret = perf_output_begin(&handle, event,
+				comm_event->event_id.header.size, 0, 0);
 
 	if (ret)
-		return;
+		goto out;
 
 	comm_event->event_id.pid = perf_event_pid(event, comm_event->task);
 	comm_event->event_id.tid = perf_event_tid(event, comm_event->task);
@@ -3852,7 +4017,12 @@ static void perf_event_comm_output(struct perf_event *event,
 	perf_output_put(&handle, comm_event->event_id);
 	perf_output_copy(&handle, comm_event->comm,
 				   comm_event->comm_size);
+
+	perf_event__output_id_sample(event, &handle, &sample);
+
 	perf_output_end(&handle);
+out:
+	comm_event->event_id.header.size = size;
 }
 
 static int perf_event_comm_match(struct perf_event *event)
@@ -3897,10 +4067,11 @@ static void perf_event_comm_event(struct perf_comm_event *comm_event)
 	comm_event->comm_size = size;
 
 	comm_event->event_id.header.size = sizeof(comm_event->event_id) + size;
-
 	rcu_read_lock();
 	list_for_each_entry_rcu(pmu, &pmus, entry) {
 		cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+		if (cpuctx->active_pmu != pmu)
+			goto next;
 		perf_event_comm_ctx(&cpuctx->ctx, comm_event);
 
 		ctxn = pmu->task_ctx_nr;
@@ -3976,11 +4147,15 @@ static void perf_event_mmap_output(struct perf_event *event,
 				     struct perf_mmap_event *mmap_event)
 {
 	struct perf_output_handle handle;
+	struct perf_sample_data sample;
 	int size = mmap_event->event_id.header.size;
-	int ret = perf_output_begin(&handle, event, size, 0, 0);
+	int ret;
 
+	perf_event_header__init_id(&mmap_event->event_id.header, &sample, event);
+	ret = perf_output_begin(&handle, event,
+				mmap_event->event_id.header.size, 0, 0);
 	if (ret)
-		return;
+		goto out;
 
 	mmap_event->event_id.pid = perf_event_pid(event, current);
 	mmap_event->event_id.tid = perf_event_tid(event, current);
@@ -3988,7 +4163,12 @@ static void perf_event_mmap_output(struct perf_event *event,
 	perf_output_put(&handle, mmap_event->event_id);
 	perf_output_copy(&handle, mmap_event->file_name,
 				   mmap_event->file_size);
+
+	perf_event__output_id_sample(event, &handle, &sample);
+
 	perf_output_end(&handle);
+out:
+	mmap_event->event_id.header.size = size;
 }
 
 static int perf_event_mmap_match(struct perf_event *event,
@@ -4086,6 +4266,8 @@ got_name:
 	rcu_read_lock();
 	list_for_each_entry_rcu(pmu, &pmus, entry) {
 		cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+		if (cpuctx->active_pmu != pmu)
+			goto next;
 		perf_event_mmap_ctx(&cpuctx->ctx, mmap_event,
 					vma->vm_flags & VM_EXEC);
 
@@ -4141,6 +4323,7 @@ void perf_event_mmap(struct vm_area_struct *vma)
 static void perf_log_throttle(struct perf_event *event, int enable)
 {
 	struct perf_output_handle handle;
+	struct perf_sample_data sample;
 	int ret;
 
 	struct {
@@ -4162,11 +4345,15 @@ static void perf_log_throttle(struct perf_event *event, int enable)
 	if (enable)
 		throttle_event.header.type = PERF_RECORD_UNTHROTTLE;
 
-	ret = perf_output_begin(&handle, event, sizeof(throttle_event), 1, 0);
+	perf_event_header__init_id(&throttle_event.header, &sample, event);
+
+	ret = perf_output_begin(&handle, event,
+				throttle_event.header.size, 1, 0);
 	if (ret)
 		return;
 
 	perf_output_put(&handle, throttle_event);
+	perf_event__output_id_sample(event, &handle, &sample);
 	perf_output_end(&handle);
 }
 
@@ -4182,6 +4369,13 @@ static int __perf_event_overflow(struct perf_event *event, int nmi,
 	struct hw_perf_event *hwc = &event->hw;
 	int ret = 0;
 
+	/*
+	 * Non-sampling counters might still use the PMI to fold short
+	 * hardware counters, ignore those.
+	 */
+	if (unlikely(!is_sampling_event(event)))
+		return 0;
+
 	if (!throttle) {
 		hwc->interrupts++;
 	} else {
@@ -4327,7 +4521,7 @@ static void perf_swevent_event(struct perf_event *event, u64 nr,
 	if (!regs)
 		return;
 
-	if (!hwc->sample_period)
+	if (!is_sampling_event(event))
 		return;
 
 	if (nr == 1 && hwc->sample_period == 1 && !event->attr.freq)
@@ -4490,7 +4684,7 @@ static int perf_swevent_add(struct perf_event *event, int flags)
 	struct hw_perf_event *hwc = &event->hw;
 	struct hlist_head *head;
 
-	if (hwc->sample_period) {
+	if (is_sampling_event(event)) {
 		hwc->last_period = hwc->sample_period;
 		perf_swevent_set_period(event);
 	}
@@ -4655,7 +4849,7 @@ static int perf_swevent_init(struct perf_event *event)
 		break;
 	}
 
-	if (event_id > PERF_COUNT_SW_MAX)
+	if (event_id >= PERF_COUNT_SW_MAX)
 		return -ENOENT;
 
 	if (!event->parent) {
@@ -4747,15 +4941,6 @@ static int perf_tp_event_init(struct perf_event *event)
 	if (event->attr.type != PERF_TYPE_TRACEPOINT)
 		return -ENOENT;
 
-	/*
-	 * Raw tracepoint data is a severe data leak, only allow root to
-	 * have these.
-	 */
-	if ((event->attr.sample_type & PERF_SAMPLE_RAW) &&
-			perf_paranoid_tracepoint_raw() &&
-			!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
 	err = perf_trace_init(event);
 	if (err)
 		return err;
@@ -4778,7 +4963,7 @@ static struct pmu perf_tracepoint = {
 
 static inline void perf_tp_register(void)
 {
-	perf_pmu_register(&perf_tracepoint);
+	perf_pmu_register(&perf_tracepoint, "tracepoint", PERF_TYPE_TRACEPOINT);
 }
 
 static int perf_event_set_filter(struct perf_event *event, void __user *arg)
@@ -4868,31 +5053,33 @@ static enum hrtimer_restart perf_swevent_hrtimer(struct hrtimer *hrtimer)
 static void perf_swevent_start_hrtimer(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
+	s64 period;
+
+	if (!is_sampling_event(event))
+		return;
 
 	hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
 	hwc->hrtimer.function = perf_swevent_hrtimer;
-	if (hwc->sample_period) {
-		s64 period = local64_read(&hwc->period_left);
 
-		if (period) {
-			if (period < 0)
-				period = 10000;
+	period = local64_read(&hwc->period_left);
+	if (period) {
+		if (period < 0)
+			period = 10000;
 
-			local64_set(&hwc->period_left, 0);
-		} else {
-			period = max_t(u64, 10000, hwc->sample_period);
-		}
-		__hrtimer_start_range_ns(&hwc->hrtimer,
+		local64_set(&hwc->period_left, 0);
+	} else {
+		period = max_t(u64, 10000, hwc->sample_period);
+	}
+	__hrtimer_start_range_ns(&hwc->hrtimer,
 				ns_to_ktime(period), 0,
 				HRTIMER_MODE_REL_PINNED, 0);
-	}
 }
 
 static void perf_swevent_cancel_hrtimer(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
 
-	if (hwc->sample_period) {
+	if (is_sampling_event(event)) {
 		ktime_t remaining = hrtimer_get_remaining(&hwc->hrtimer);
 		local64_set(&hwc->period_left, ktime_to_ns(remaining));
 
@@ -5087,25 +5274,94 @@ static void *find_pmu_context(int ctxn)
 	return NULL;
 }
 
-static void free_pmu_context(void * __percpu cpu_context)
+static void update_pmu_context(struct pmu *pmu, struct pmu *old_pmu)
 {
-	struct pmu *pmu;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct perf_cpu_context *cpuctx;
+
+		cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu);
+
+		if (cpuctx->active_pmu == old_pmu)
+			cpuctx->active_pmu = pmu;
+	}
+}
+
+static void free_pmu_context(struct pmu *pmu)
+{
+	struct pmu *i;
 
 	mutex_lock(&pmus_lock);
 	/*
 	 * Like a real lame refcount.
 	 */
-	list_for_each_entry(pmu, &pmus, entry) {
-		if (pmu->pmu_cpu_context == cpu_context)
+	list_for_each_entry(i, &pmus, entry) {
+		if (i->pmu_cpu_context == pmu->pmu_cpu_context) {
+			update_pmu_context(i, pmu);
 			goto out;
+		}
 	}
 
-	free_percpu(cpu_context);
+	free_percpu(pmu->pmu_cpu_context);
 out:
 	mutex_unlock(&pmus_lock);
 }
+static struct idr pmu_idr;
+
+static ssize_t
+type_show(struct device *dev, struct device_attribute *attr, char *page)
+{
+	struct pmu *pmu = dev_get_drvdata(dev);
+
+	return snprintf(page, PAGE_SIZE-1, "%d\n", pmu->type);
+}
+
+static struct device_attribute pmu_dev_attrs[] = {
+       __ATTR_RO(type),
+       __ATTR_NULL,
+};
 
-int perf_pmu_register(struct pmu *pmu)
+static int pmu_bus_running;
+static struct bus_type pmu_bus = {
+	.name		= "event_source",
+	.dev_attrs	= pmu_dev_attrs,
+};
+
+static void pmu_dev_release(struct device *dev)
+{
+	kfree(dev);
+}
+
+static int pmu_dev_alloc(struct pmu *pmu)
+{
+	int ret = -ENOMEM;
+
+	pmu->dev = kzalloc(sizeof(struct device), GFP_KERNEL);
+	if (!pmu->dev)
+		goto out;
+
+	device_initialize(pmu->dev);
+	ret = dev_set_name(pmu->dev, "%s", pmu->name);
+	if (ret)
+		goto free_dev;
+
+	dev_set_drvdata(pmu->dev, pmu);
+	pmu->dev->bus = &pmu_bus;
+	pmu->dev->release = pmu_dev_release;
+	ret = device_add(pmu->dev);
+	if (ret)
+		goto free_dev;
+
+out:
+	return ret;
+
+free_dev:
+	put_device(pmu->dev);
+	goto out;
+}
+
+int perf_pmu_register(struct pmu *pmu, char *name, int type)
 {
 	int cpu, ret;
 
@@ -5115,13 +5371,38 @@ int perf_pmu_register(struct pmu *pmu)
 	if (!pmu->pmu_disable_count)
 		goto unlock;
 
+	pmu->type = -1;
+	if (!name)
+		goto skip_type;
+	pmu->name = name;
+
+	if (type < 0) {
+		int err = idr_pre_get(&pmu_idr, GFP_KERNEL);
+		if (!err)
+			goto free_pdc;
+
+		err = idr_get_new_above(&pmu_idr, pmu, PERF_TYPE_MAX, &type);
+		if (err) {
+			ret = err;
+			goto free_pdc;
+		}
+	}
+	pmu->type = type;
+
+	if (pmu_bus_running) {
+		ret = pmu_dev_alloc(pmu);
+		if (ret)
+			goto free_idr;
+	}
+
+skip_type:
 	pmu->pmu_cpu_context = find_pmu_context(pmu->task_ctx_nr);
 	if (pmu->pmu_cpu_context)
 		goto got_cpu_context;
 
 	pmu->pmu_cpu_context = alloc_percpu(struct perf_cpu_context);
 	if (!pmu->pmu_cpu_context)
-		goto free_pdc;
+		goto free_dev;
 
 	for_each_possible_cpu(cpu) {
 		struct perf_cpu_context *cpuctx;
@@ -5132,6 +5413,7 @@ int perf_pmu_register(struct pmu *pmu)
 		cpuctx->ctx.pmu = pmu;
 		cpuctx->jiffies_interval = 1;
 		INIT_LIST_HEAD(&cpuctx->rotation_list);
+		cpuctx->active_pmu = pmu;
 	}
 
 got_cpu_context:
@@ -5164,6 +5446,14 @@ unlock:
 
 	return ret;
 
+free_dev:
+	device_del(pmu->dev);
+	put_device(pmu->dev);
+
+free_idr:
+	if (pmu->type >= PERF_TYPE_MAX)
+		idr_remove(&pmu_idr, pmu->type);
+
 free_pdc:
 	free_percpu(pmu->pmu_disable_count);
 	goto unlock;
@@ -5183,7 +5473,11 @@ void perf_pmu_unregister(struct pmu *pmu)
 	synchronize_rcu();
 
 	free_percpu(pmu->pmu_disable_count);
-	free_pmu_context(pmu->pmu_cpu_context);
+	if (pmu->type >= PERF_TYPE_MAX)
+		idr_remove(&pmu_idr, pmu->type);
+	device_del(pmu->dev);
+	put_device(pmu->dev);
+	free_pmu_context(pmu);
 }
 
 struct pmu *perf_init_event(struct perf_event *event)
@@ -5192,6 +5486,13 @@ struct pmu *perf_init_event(struct perf_event *event)
 	int idx;
 
 	idx = srcu_read_lock(&pmus_srcu);
+
+	rcu_read_lock();
+	pmu = idr_find(&pmu_idr, event->attr.type);
+	rcu_read_unlock();
+	if (pmu)
+		goto unlock;
+
 	list_for_each_entry_rcu(pmu, &pmus, entry) {
 		int ret = pmu->event_init(event);
 		if (!ret)
@@ -5651,12 +5952,18 @@ SYSCALL_DEFINE5(perf_event_open,
 	mutex_unlock(&ctx->mutex);
 
 	event->owner = current;
-	get_task_struct(current);
+
 	mutex_lock(&current->perf_event_mutex);
 	list_add_tail(&event->owner_entry, &current->perf_event_list);
 	mutex_unlock(&current->perf_event_mutex);
 
 	/*
+	 * Precalculate sample_data sizes
+	 */
+	perf_event__header_size(event);
+	perf_event__id_header_size(event);
+
+	/*
 	 * Drop the reference on the group_event after placing the
 	 * new event on the sibling_list. This ensures destruction
 	 * of the group leader will find the pointer to itself in
@@ -5719,12 +6026,6 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr, int cpu,
 	++ctx->generation;
 	mutex_unlock(&ctx->mutex);
 
-	event->owner = current;
-	get_task_struct(current);
-	mutex_lock(&current->perf_event_mutex);
-	list_add_tail(&event->owner_entry, &current->perf_event_list);
-	mutex_unlock(&current->perf_event_mutex);
-
 	return event;
 
 err_free:
@@ -5875,8 +6176,24 @@ again:
  */
 void perf_event_exit_task(struct task_struct *child)
 {
+	struct perf_event *event, *tmp;
 	int ctxn;
 
+	mutex_lock(&child->perf_event_mutex);
+	list_for_each_entry_safe(event, tmp, &child->perf_event_list,
+				 owner_entry) {
+		list_del_init(&event->owner_entry);
+
+		/*
+		 * Ensure the list deletion is visible before we clear
+		 * the owner, closes a race against perf_release() where
+		 * we need to serialize on the owner->perf_event_mutex.
+		 */
+		smp_wmb();
+		event->owner = NULL;
+	}
+	mutex_unlock(&child->perf_event_mutex);
+
 	for_each_task_context_nr(ctxn)
 		perf_event_exit_task_context(child, ctxn);
 }
@@ -5999,6 +6316,12 @@ inherit_event(struct perf_event *parent_event,
 	child_event->overflow_handler = parent_event->overflow_handler;
 
 	/*
+	 * Precalculate sample_data sizes
+	 */
+	perf_event__header_size(child_event);
+	perf_event__id_header_size(child_event);
+
+	/*
 	 * Link it up in the child's context:
 	 */
 	raw_spin_lock_irqsave(&child_ctx->lock, flags);
@@ -6096,6 +6419,7 @@ int perf_event_init_context(struct task_struct *child, int ctxn)
 	struct perf_event *event;
 	struct task_struct *parent = current;
 	int inherited_all = 1;
+	unsigned long flags;
 	int ret = 0;
 
 	child->perf_event_ctxp[ctxn] = NULL;
@@ -6136,6 +6460,15 @@ int perf_event_init_context(struct task_struct *child, int ctxn)
 			break;
 	}
 
+	/*
+	 * We can't hold ctx->lock when iterating the ->flexible_group list due
+	 * to allocations, but we need to prevent rotation because
+	 * rotate_ctx() will change the list from interrupt context.
+	 */
+	raw_spin_lock_irqsave(&parent_ctx->lock, flags);
+	parent_ctx->rotate_disable = 1;
+	raw_spin_unlock_irqrestore(&parent_ctx->lock, flags);
+
 	list_for_each_entry(event, &parent_ctx->flexible_groups, group_entry) {
 		ret = inherit_task_group(event, parent, parent_ctx,
 					 child, ctxn, &inherited_all);
@@ -6143,6 +6476,10 @@ int perf_event_init_context(struct task_struct *child, int ctxn)
 			break;
 	}
 
+	raw_spin_lock_irqsave(&parent_ctx->lock, flags);
+	parent_ctx->rotate_disable = 0;
+	raw_spin_unlock_irqrestore(&parent_ctx->lock, flags);
+
 	child_ctx = child->perf_event_ctxp[ctxn];
 
 	if (child_ctx && inherited_all) {
@@ -6215,7 +6552,7 @@ static void __cpuinit perf_event_init_cpu(int cpu)
 	mutex_unlock(&swhash->hlist_mutex);
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
+#if defined CONFIG_HOTPLUG_CPU || defined CONFIG_KEXEC
 static void perf_pmu_rotate_stop(struct pmu *pmu)
 {
 	struct perf_cpu_context *cpuctx = this_cpu_ptr(pmu->pmu_cpu_context);
@@ -6269,6 +6606,26 @@ static void perf_event_exit_cpu(int cpu)
 static inline void perf_event_exit_cpu(int cpu) { }
 #endif
 
+static int
+perf_reboot(struct notifier_block *notifier, unsigned long val, void *v)
+{
+	int cpu;
+
+	for_each_online_cpu(cpu)
+		perf_event_exit_cpu(cpu);
+
+	return NOTIFY_OK;
+}
+
+/*
+ * Run the perf reboot notifier at the very last possible moment so that
+ * the generic watchdog code runs as long as possible.
+ */
+static struct notifier_block perf_reboot_notifier = {
+	.notifier_call = perf_reboot,
+	.priority = INT_MIN,
+};
+
 static int __cpuinit
 perf_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu)
 {
@@ -6295,11 +6652,47 @@ perf_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu)
 
 void __init perf_event_init(void)
 {
+	int ret;
+
+	idr_init(&pmu_idr);
+
 	perf_event_init_all_cpus();
 	init_srcu_struct(&pmus_srcu);
-	perf_pmu_register(&perf_swevent);
-	perf_pmu_register(&perf_cpu_clock);
-	perf_pmu_register(&perf_task_clock);
+	perf_pmu_register(&perf_swevent, "software", PERF_TYPE_SOFTWARE);
+	perf_pmu_register(&perf_cpu_clock, NULL, -1);
+	perf_pmu_register(&perf_task_clock, NULL, -1);
 	perf_tp_register();
 	perf_cpu_notifier(perf_cpu_notify);
+	register_reboot_notifier(&perf_reboot_notifier);
+
+	ret = init_hw_breakpoint();
+	WARN(ret, "hw_breakpoint initialization failed with: %d", ret);
+}
+
+static int __init perf_event_sysfs_init(void)
+{
+	struct pmu *pmu;
+	int ret;
+
+	mutex_lock(&pmus_lock);
+
+	ret = bus_register(&pmu_bus);
+	if (ret)
+		goto unlock;
+
+	list_for_each_entry(pmu, &pmus, entry) {
+		if (!pmu->name || pmu->type < 0)
+			continue;
+
+		ret = pmu_dev_alloc(pmu);
+		WARN(ret, "Failed to register pmu: %s, reason %d\n", pmu->name, ret);
+	}
+	pmu_bus_running = 1;
+	ret = 0;
+
+unlock:
+	mutex_unlock(&pmus_lock);
+
+	return ret;
 }
+device_initcall(perf_event_sysfs_init);
diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c
index c7a8f453919..aeaa7f84682 100644
--- a/kernel/pm_qos_params.c
+++ b/kernel/pm_qos_params.c
@@ -121,10 +121,10 @@ static inline int pm_qos_get_value(struct pm_qos_object *o)
 
 	switch (o->type) {
 	case PM_QOS_MIN:
-		return plist_last(&o->requests)->prio;
+		return plist_first(&o->requests)->prio;
 
 	case PM_QOS_MAX:
-		return plist_first(&o->requests)->prio;
+		return plist_last(&o->requests)->prio;
 
 	default:
 		/* runtime check for not using enum */
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 6842eeba587..05bb7173850 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -37,13 +37,13 @@ static int check_clock(const clockid_t which_clock)
 	if (pid == 0)
 		return 0;
 
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	p = find_task_by_vpid(pid);
 	if (!p || !(CPUCLOCK_PERTHREAD(which_clock) ?
-		   same_thread_group(p, current) : thread_group_leader(p))) {
+		   same_thread_group(p, current) : has_group_leader_pid(p))) {
 		error = -EINVAL;
 	}
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 
 	return error;
 }
@@ -390,7 +390,7 @@ int posix_cpu_timer_create(struct k_itimer *new_timer)
 
 	INIT_LIST_HEAD(&new_timer->it.cpu.entry);
 
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 	if (CPUCLOCK_PERTHREAD(new_timer->it_clock)) {
 		if (pid == 0) {
 			p = current;
@@ -404,7 +404,7 @@ int posix_cpu_timer_create(struct k_itimer *new_timer)
 			p = current->group_leader;
 		} else {
 			p = find_task_by_vpid(pid);
-			if (p && !thread_group_leader(p))
+			if (p && !has_group_leader_pid(p))
 				p = NULL;
 		}
 	}
@@ -414,7 +414,7 @@ int posix_cpu_timer_create(struct k_itimer *new_timer)
 	} else {
 		ret = -EINVAL;
 	}
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 
 	return ret;
 }
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 9ca4973f736..93bd2eb2bc5 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -145,7 +145,13 @@ static int common_timer_del(struct k_itimer *timer);
 
 static enum hrtimer_restart posix_timer_fn(struct hrtimer *data);
 
-static struct k_itimer *lock_timer(timer_t timer_id, unsigned long *flags);
+static struct k_itimer *__lock_timer(timer_t timer_id, unsigned long *flags);
+
+#define lock_timer(tid, flags)						   \
+({	struct k_itimer *__timr;					   \
+	__cond_lock(&__timr->it_lock, __timr = __lock_timer(tid, flags));  \
+	__timr;								   \
+})
 
 static inline void unlock_timer(struct k_itimer *timr, unsigned long flags)
 {
@@ -619,7 +625,7 @@ out:
  * the find to the timer lock.  To avoid a dead lock, the timer id MUST
  * be release with out holding the timer lock.
  */
-static struct k_itimer *lock_timer(timer_t timer_id, unsigned long *flags)
+static struct k_itimer *__lock_timer(timer_t timer_id, unsigned long *flags)
 {
 	struct k_itimer *timr;
 	/*
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 29bff6117ab..a5aff3ebad3 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -246,9 +246,13 @@ config PM_OPS
 	depends on PM_SLEEP || PM_RUNTIME
 	default y
 
+config ARCH_HAS_OPP
+	bool
+
 config PM_OPP
 	bool "Operating Performance Point (OPP) Layer library"
 	depends on PM
+	depends on ARCH_HAS_OPP
 	---help---
 	  SOCs have a standard set of tuples consisting of frequency and
 	  voltage pairs that the device will support per voltage domain. This
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 657272e91d0..048d0b51483 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -327,7 +327,6 @@ static int create_image(int platform_mode)
 int hibernation_snapshot(int platform_mode)
 {
 	int error;
-	gfp_t saved_mask;
 
 	error = platform_begin(platform_mode);
 	if (error)
@@ -339,7 +338,7 @@ int hibernation_snapshot(int platform_mode)
 		goto Close;
 
 	suspend_console();
-	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+	pm_restrict_gfp_mask();
 	error = dpm_suspend_start(PMSG_FREEZE);
 	if (error)
 		goto Recover_platform;
@@ -348,7 +347,10 @@ int hibernation_snapshot(int platform_mode)
 		goto Recover_platform;
 
 	error = create_image(platform_mode);
-	/* Control returns here after successful restore */
+	/*
+	 * Control returns here (1) after the image has been created or the
+	 * image creation has failed and (2) after a successful restore.
+	 */
 
  Resume_devices:
 	/* We may need to release the preallocated image pages here. */
@@ -357,7 +359,10 @@ int hibernation_snapshot(int platform_mode)
 
 	dpm_resume_end(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
-	set_gfp_allowed_mask(saved_mask);
+
+	if (error || !in_suspend)
+		pm_restore_gfp_mask();
+
 	resume_console();
  Close:
 	platform_end(platform_mode);
@@ -452,17 +457,16 @@ static int resume_target_kernel(bool platform_mode)
 int hibernation_restore(int platform_mode)
 {
 	int error;
-	gfp_t saved_mask;
 
 	pm_prepare_console();
 	suspend_console();
-	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+	pm_restrict_gfp_mask();
 	error = dpm_suspend_start(PMSG_QUIESCE);
 	if (!error) {
 		error = resume_target_kernel(platform_mode);
 		dpm_resume_end(PMSG_RECOVER);
 	}
-	set_gfp_allowed_mask(saved_mask);
+	pm_restore_gfp_mask();
 	resume_console();
 	pm_restore_console();
 	return error;
@@ -476,7 +480,6 @@ int hibernation_restore(int platform_mode)
 int hibernation_platform_enter(void)
 {
 	int error;
-	gfp_t saved_mask;
 
 	if (!hibernation_ops)
 		return -ENOSYS;
@@ -492,7 +495,6 @@ int hibernation_platform_enter(void)
 
 	entering_platform_hibernation = true;
 	suspend_console();
-	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
 	error = dpm_suspend_start(PMSG_HIBERNATE);
 	if (error) {
 		if (hibernation_ops->recover)
@@ -536,7 +538,6 @@ int hibernation_platform_enter(void)
  Resume_devices:
 	entering_platform_hibernation = false;
 	dpm_resume_end(PMSG_RESTORE);
-	set_gfp_allowed_mask(saved_mask);
 	resume_console();
 
  Close:
@@ -646,6 +647,7 @@ int hibernate(void)
 		swsusp_free();
 		if (!error)
 			power_down();
+		pm_restore_gfp_mask();
 	} else {
 		pr_debug("PM: Image restored successfully.\n");
 	}
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 7335952ee47..031d5e3a619 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -22,6 +22,7 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/suspend.h>
+#include <trace/events/power.h>
 
 #include "power.h"
 
@@ -197,18 +198,18 @@ static int suspend_enter(suspend_state_t state)
 int suspend_devices_and_enter(suspend_state_t state)
 {
 	int error;
-	gfp_t saved_mask;
 
 	if (!suspend_ops)
 		return -ENOSYS;
 
+	trace_machine_suspend(state);
 	if (suspend_ops->begin) {
 		error = suspend_ops->begin(state);
 		if (error)
 			goto Close;
 	}
 	suspend_console();
-	saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+	pm_restrict_gfp_mask();
 	suspend_test_start();
 	error = dpm_suspend_start(PMSG_SUSPEND);
 	if (error) {
@@ -225,11 +226,12 @@ int suspend_devices_and_enter(suspend_state_t state)
 	suspend_test_start();
 	dpm_resume_end(PMSG_RESUME);
 	suspend_test_finish("resume devices");
-	set_gfp_allowed_mask(saved_mask);
+	pm_restore_gfp_mask();
 	resume_console();
  Close:
 	if (suspend_ops->end)
 		suspend_ops->end();
+	trace_machine_suspend(PWR_EVENT_EXIT);
 	return error;
 
  Recover_platform:
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index a0e4a86ccf9..8c7e4832b9b 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -6,6 +6,7 @@
  *
  * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
  * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
+ * Copyright (C) 2010 Bojan Smojver <bojan@rexursive.com>
  *
  * This file is released under the GPLv2.
  *
@@ -29,7 +30,7 @@
 
 #include "power.h"
 
-#define HIBERNATE_SIG	"LINHIB0001"
+#define HIBERNATE_SIG	"S1SUSPEND"
 
 /*
  *	The swap map is a data structure used for keeping track of each page
@@ -753,30 +754,43 @@ static int load_image_lzo(struct swap_map_handle *handle,
 {
 	unsigned int m;
 	int error = 0;
+	struct bio *bio;
 	struct timeval start;
 	struct timeval stop;
 	unsigned nr_pages;
-	size_t off, unc_len, cmp_len;
-	unsigned char *unc, *cmp, *page;
+	size_t i, off, unc_len, cmp_len;
+	unsigned char *unc, *cmp, *page[LZO_CMP_PAGES];
 
-	page = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH);
-	if (!page) {
-		printk(KERN_ERR "PM: Failed to allocate LZO page\n");
-		return -ENOMEM;
+	for (i = 0; i < LZO_CMP_PAGES; i++) {
+		page[i] = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH);
+		if (!page[i]) {
+			printk(KERN_ERR "PM: Failed to allocate LZO page\n");
+
+			while (i)
+				free_page((unsigned long)page[--i]);
+
+			return -ENOMEM;
+		}
 	}
 
 	unc = vmalloc(LZO_UNC_SIZE);
 	if (!unc) {
 		printk(KERN_ERR "PM: Failed to allocate LZO uncompressed\n");
-		free_page((unsigned long)page);
+
+		for (i = 0; i < LZO_CMP_PAGES; i++)
+			free_page((unsigned long)page[i]);
+
 		return -ENOMEM;
 	}
 
 	cmp = vmalloc(LZO_CMP_SIZE);
 	if (!cmp) {
 		printk(KERN_ERR "PM: Failed to allocate LZO compressed\n");
+
 		vfree(unc);
-		free_page((unsigned long)page);
+		for (i = 0; i < LZO_CMP_PAGES; i++)
+			free_page((unsigned long)page[i]);
+
 		return -ENOMEM;
 	}
 
@@ -787,6 +801,7 @@ static int load_image_lzo(struct swap_map_handle *handle,
 	if (!m)
 		m = 1;
 	nr_pages = 0;
+	bio = NULL;
 	do_gettimeofday(&start);
 
 	error = snapshot_write_next(snapshot);
@@ -794,11 +809,11 @@ static int load_image_lzo(struct swap_map_handle *handle,
 		goto out_finish;
 
 	for (;;) {
-		error = swap_read_page(handle, page, NULL); /* sync */
+		error = swap_read_page(handle, page[0], NULL); /* sync */
 		if (error)
 			break;
 
-		cmp_len = *(size_t *)page;
+		cmp_len = *(size_t *)page[0];
 		if (unlikely(!cmp_len ||
 		             cmp_len > lzo1x_worst_compress(LZO_UNC_SIZE))) {
 			printk(KERN_ERR "PM: Invalid LZO compressed length\n");
@@ -806,13 +821,20 @@ static int load_image_lzo(struct swap_map_handle *handle,
 			break;
 		}
 
-		memcpy(cmp, page, PAGE_SIZE);
-		for (off = PAGE_SIZE; off < LZO_HEADER + cmp_len; off += PAGE_SIZE) {
-			error = swap_read_page(handle, page, NULL); /* sync */
+		for (off = PAGE_SIZE, i = 1;
+		     off < LZO_HEADER + cmp_len; off += PAGE_SIZE, i++) {
+			error = swap_read_page(handle, page[i], &bio);
 			if (error)
 				goto out_finish;
+		}
 
-			memcpy(cmp + off, page, PAGE_SIZE);
+		error = hib_wait_on_bio_chain(&bio); /* need all data now */
+		if (error)
+			goto out_finish;
+
+		for (off = 0, i = 0;
+		     off < LZO_HEADER + cmp_len; off += PAGE_SIZE, i++) {
+			memcpy(cmp + off, page[i], PAGE_SIZE);
 		}
 
 		unc_len = LZO_UNC_SIZE;
@@ -857,7 +879,8 @@ out_finish:
 
 	vfree(cmp);
 	vfree(unc);
-	free_page((unsigned long)page);
+	for (i = 0; i < LZO_CMP_PAGES; i++)
+		free_page((unsigned long)page[i]);
 
 	return error;
 }
diff --git a/kernel/power/user.c b/kernel/power/user.c
index e819e17877c..c36c3b9e8a8 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -137,7 +137,7 @@ static int snapshot_release(struct inode *inode, struct file *filp)
 	free_all_swap_pages(data->swap);
 	if (data->frozen)
 		thaw_processes();
-	pm_notifier_call_chain(data->mode == O_WRONLY ?
+	pm_notifier_call_chain(data->mode == O_RDONLY ?
 			PM_POST_HIBERNATION : PM_POST_RESTORE);
 	atomic_inc(&snapshot_device_available);
 
@@ -263,6 +263,7 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd,
 	case SNAPSHOT_UNFREEZE:
 		if (!data->frozen || data->ready)
 			break;
+		pm_restore_gfp_mask();
 		thaw_processes();
 		usermodehelper_enable();
 		data->frozen = 0;
@@ -275,6 +276,7 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd,
 			error = -EPERM;
 			break;
 		}
+		pm_restore_gfp_mask();
 		error = hibernation_snapshot(data->platform_support);
 		if (!error)
 			error = put_user(in_suspend, (int __user *)arg);
diff --git a/kernel/printk.c b/kernel/printk.c
index b2ebaee8c37..4642a5c439e 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -43,12 +43,6 @@
 #include <asm/uaccess.h>
 
 /*
- * for_each_console() allows you to iterate on each console
- */
-#define for_each_console(con) \
-	for (con = console_drivers; con != NULL; con = con->next)
-
-/*
  * Architectures can override it:
  */
 void asmlinkage __attribute__((weak)) early_printk(const char *fmt, ...)
@@ -261,6 +255,12 @@ static inline void boot_delay_msec(void)
 }
 #endif
 
+#ifdef CONFIG_SECURITY_DMESG_RESTRICT
+int dmesg_restrict = 1;
+#else
+int dmesg_restrict;
+#endif
+
 int do_syslog(int type, char __user *buf, int len, bool from_file)
 {
 	unsigned i, j, limit, count;
@@ -268,7 +268,20 @@ int do_syslog(int type, char __user *buf, int len, bool from_file)
 	char c;
 	int error = 0;
 
-	error = security_syslog(type, from_file);
+	/*
+	 * If this is from /proc/kmsg we only do the capabilities checks
+	 * at open time.
+	 */
+	if (type == SYSLOG_ACTION_OPEN || !from_file) {
+		if (dmesg_restrict && !capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		if ((type != SYSLOG_ACTION_READ_ALL &&
+		     type != SYSLOG_ACTION_SIZE_BUFFER) &&
+		    !capable(CAP_SYS_ADMIN))
+			return -EPERM;
+	}
+
+	error = security_syslog(type);
 	if (error)
 		return error;
 
@@ -1055,21 +1068,23 @@ static DEFINE_PER_CPU(int, printk_pending);
 
 void printk_tick(void)
 {
-	if (__get_cpu_var(printk_pending)) {
-		__get_cpu_var(printk_pending) = 0;
+	if (__this_cpu_read(printk_pending)) {
+		__this_cpu_write(printk_pending, 0);
 		wake_up_interruptible(&log_wait);
 	}
 }
 
 int printk_needs_cpu(int cpu)
 {
-	return per_cpu(printk_pending, cpu);
+	if (cpu_is_offline(cpu))
+		printk_tick();
+	return __this_cpu_read(printk_pending);
 }
 
 void wake_up_klogd(void)
 {
 	if (waitqueue_active(&log_wait))
-		__raw_get_cpu_var(printk_pending) = 1;
+		this_cpu_write(printk_pending, 1);
 }
 
 /**
@@ -1338,6 +1353,7 @@ void register_console(struct console *newcon)
 		spin_unlock_irqrestore(&logbuf_lock, flags);
 	}
 	release_console_sem();
+	console_sysfs_notify();
 
 	/*
 	 * By unregistering the bootconsoles after we enable the real console
@@ -1396,6 +1412,7 @@ int unregister_console(struct console *console)
 		console_drivers->flags |= CON_CONSDEV;
 
 	release_console_sem();
+	console_sysfs_notify();
 	return res;
 }
 EXPORT_SYMBOL(unregister_console);
diff --git a/kernel/range.c b/kernel/range.c
index 471b66acabb..37fa9b99ad5 100644
--- a/kernel/range.c
+++ b/kernel/range.c
@@ -119,7 +119,7 @@ static int cmp_range(const void *x1, const void *x2)
 
 int clean_sort_range(struct range *range, int az)
 {
-	int i, j, k = az - 1, nr_range = 0;
+	int i, j, k = az - 1, nr_range = az;
 
 	for (i = 0; i < k; i++) {
 		if (range[i].end)
diff --git a/kernel/rcutiny.c b/kernel/rcutiny.c
index d806735342a..03449372474 100644
--- a/kernel/rcutiny.c
+++ b/kernel/rcutiny.c
@@ -36,31 +36,16 @@
 #include <linux/time.h>
 #include <linux/cpu.h>
 
-/* Global control variables for rcupdate callback mechanism. */
-struct rcu_ctrlblk {
-	struct rcu_head *rcucblist;	/* List of pending callbacks (CBs). */
-	struct rcu_head **donetail;	/* ->next pointer of last "done" CB. */
-	struct rcu_head **curtail;	/* ->next pointer of last CB. */
-};
-
-/* Definition for rcupdate control block. */
-static struct rcu_ctrlblk rcu_sched_ctrlblk = {
-	.donetail	= &rcu_sched_ctrlblk.rcucblist,
-	.curtail	= &rcu_sched_ctrlblk.rcucblist,
-};
-
-static struct rcu_ctrlblk rcu_bh_ctrlblk = {
-	.donetail	= &rcu_bh_ctrlblk.rcucblist,
-	.curtail	= &rcu_bh_ctrlblk.rcucblist,
-};
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-int rcu_scheduler_active __read_mostly;
-EXPORT_SYMBOL_GPL(rcu_scheduler_active);
-#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+/* Controls for rcu_kthread() kthread, replacing RCU_SOFTIRQ used previously. */
+static struct task_struct *rcu_kthread_task;
+static DECLARE_WAIT_QUEUE_HEAD(rcu_kthread_wq);
+static unsigned long have_rcu_kthread_work;
+static void invoke_rcu_kthread(void);
 
 /* Forward declarations for rcutiny_plugin.h. */
-static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp);
+struct rcu_ctrlblk;
+static void rcu_process_callbacks(struct rcu_ctrlblk *rcp);
+static int rcu_kthread(void *arg);
 static void __call_rcu(struct rcu_head *head,
 		       void (*func)(struct rcu_head *rcu),
 		       struct rcu_ctrlblk *rcp);
@@ -123,7 +108,7 @@ void rcu_sched_qs(int cpu)
 {
 	if (rcu_qsctr_help(&rcu_sched_ctrlblk) +
 	    rcu_qsctr_help(&rcu_bh_ctrlblk))
-		raise_softirq(RCU_SOFTIRQ);
+		invoke_rcu_kthread();
 }
 
 /*
@@ -132,7 +117,7 @@ void rcu_sched_qs(int cpu)
 void rcu_bh_qs(int cpu)
 {
 	if (rcu_qsctr_help(&rcu_bh_ctrlblk))
-		raise_softirq(RCU_SOFTIRQ);
+		invoke_rcu_kthread();
 }
 
 /*
@@ -152,13 +137,14 @@ void rcu_check_callbacks(int cpu, int user)
 }
 
 /*
- * Helper function for rcu_process_callbacks() that operates on the
- * specified rcu_ctrlkblk structure.
+ * Invoke the RCU callbacks on the specified rcu_ctrlkblk structure
+ * whose grace period has elapsed.
  */
-static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
+static void rcu_process_callbacks(struct rcu_ctrlblk *rcp)
 {
 	struct rcu_head *next, *list;
 	unsigned long flags;
+	RCU_TRACE(int cb_count = 0);
 
 	/* If no RCU callbacks ready to invoke, just return. */
 	if (&rcp->rcucblist == rcp->donetail)
@@ -180,19 +166,58 @@ static void __rcu_process_callbacks(struct rcu_ctrlblk *rcp)
 		next = list->next;
 		prefetch(next);
 		debug_rcu_head_unqueue(list);
+		local_bh_disable();
 		list->func(list);
+		local_bh_enable();
 		list = next;
+		RCU_TRACE(cb_count++);
 	}
+	RCU_TRACE(rcu_trace_sub_qlen(rcp, cb_count));
 }
 
 /*
- * Invoke any callbacks whose grace period has completed.
+ * This kthread invokes RCU callbacks whose grace periods have
+ * elapsed.  It is awakened as needed, and takes the place of the
+ * RCU_SOFTIRQ that was used previously for this purpose.
+ * This is a kthread, but it is never stopped, at least not until
+ * the system goes down.
  */
-static void rcu_process_callbacks(struct softirq_action *unused)
+static int rcu_kthread(void *arg)
 {
-	__rcu_process_callbacks(&rcu_sched_ctrlblk);
-	__rcu_process_callbacks(&rcu_bh_ctrlblk);
-	rcu_preempt_process_callbacks();
+	unsigned long work;
+	unsigned long morework;
+	unsigned long flags;
+
+	for (;;) {
+		wait_event(rcu_kthread_wq, have_rcu_kthread_work != 0);
+		morework = rcu_boost();
+		local_irq_save(flags);
+		work = have_rcu_kthread_work;
+		have_rcu_kthread_work = morework;
+		local_irq_restore(flags);
+		if (work) {
+			rcu_process_callbacks(&rcu_sched_ctrlblk);
+			rcu_process_callbacks(&rcu_bh_ctrlblk);
+			rcu_preempt_process_callbacks();
+		}
+		schedule_timeout_interruptible(1); /* Leave CPU for others. */
+	}
+
+	return 0;  /* Not reached, but needed to shut gcc up. */
+}
+
+/*
+ * Wake up rcu_kthread() to process callbacks now eligible for invocation
+ * or to boost readers.
+ */
+static void invoke_rcu_kthread(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	have_rcu_kthread_work = 1;
+	wake_up(&rcu_kthread_wq);
+	local_irq_restore(flags);
 }
 
 /*
@@ -230,6 +255,7 @@ static void __call_rcu(struct rcu_head *head,
 	local_irq_save(flags);
 	*rcp->curtail = head;
 	rcp->curtail = &head->next;
+	RCU_TRACE(rcp->qlen++);
 	local_irq_restore(flags);
 }
 
@@ -282,7 +308,16 @@ void rcu_barrier_sched(void)
 }
 EXPORT_SYMBOL_GPL(rcu_barrier_sched);
 
-void __init rcu_init(void)
+/*
+ * Spawn the kthread that invokes RCU callbacks.
+ */
+static int __init rcu_spawn_kthreads(void)
 {
-	open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
+	struct sched_param sp;
+
+	rcu_kthread_task = kthread_run(rcu_kthread, NULL, "rcu_kthread");
+	sp.sched_priority = RCU_BOOST_PRIO;
+	sched_setscheduler_nocheck(rcu_kthread_task, SCHED_FIFO, &sp);
+	return 0;
 }
+early_initcall(rcu_spawn_kthreads);
diff --git a/kernel/rcutiny_plugin.h b/kernel/rcutiny_plugin.h
index 6ceca4f745f..015abaea962 100644
--- a/kernel/rcutiny_plugin.h
+++ b/kernel/rcutiny_plugin.h
@@ -22,6 +22,40 @@
  * Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
  */
 
+#include <linux/kthread.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#ifdef CONFIG_RCU_TRACE
+#define RCU_TRACE(stmt)	stmt
+#else /* #ifdef CONFIG_RCU_TRACE */
+#define RCU_TRACE(stmt)
+#endif /* #else #ifdef CONFIG_RCU_TRACE */
+
+/* Global control variables for rcupdate callback mechanism. */
+struct rcu_ctrlblk {
+	struct rcu_head *rcucblist;	/* List of pending callbacks (CBs). */
+	struct rcu_head **donetail;	/* ->next pointer of last "done" CB. */
+	struct rcu_head **curtail;	/* ->next pointer of last CB. */
+	RCU_TRACE(long qlen);		/* Number of pending CBs. */
+};
+
+/* Definition for rcupdate control block. */
+static struct rcu_ctrlblk rcu_sched_ctrlblk = {
+	.donetail	= &rcu_sched_ctrlblk.rcucblist,
+	.curtail	= &rcu_sched_ctrlblk.rcucblist,
+};
+
+static struct rcu_ctrlblk rcu_bh_ctrlblk = {
+	.donetail	= &rcu_bh_ctrlblk.rcucblist,
+	.curtail	= &rcu_bh_ctrlblk.rcucblist,
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+int rcu_scheduler_active __read_mostly;
+EXPORT_SYMBOL_GPL(rcu_scheduler_active);
+#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
 #ifdef CONFIG_TINY_PREEMPT_RCU
 
 #include <linux/delay.h>
@@ -46,17 +80,45 @@ struct rcu_preempt_ctrlblk {
 	struct list_head *gp_tasks;
 				/* Pointer to the first task blocking the */
 				/*  current grace period, or NULL if there */
-				/*  is not such task. */
+				/*  is no such task. */
 	struct list_head *exp_tasks;
 				/* Pointer to first task blocking the */
 				/*  current expedited grace period, or NULL */
 				/*  if there is no such task.  If there */
 				/*  is no current expedited grace period, */
 				/*  then there cannot be any such task. */
+#ifdef CONFIG_RCU_BOOST
+	struct list_head *boost_tasks;
+				/* Pointer to first task that needs to be */
+				/*  priority-boosted, or NULL if no priority */
+				/*  boosting is needed.  If there is no */
+				/*  current or expedited grace period, there */
+				/*  can be no such task. */
+#endif /* #ifdef CONFIG_RCU_BOOST */
 	u8 gpnum;		/* Current grace period. */
 	u8 gpcpu;		/* Last grace period blocked by the CPU. */
 	u8 completed;		/* Last grace period completed. */
 				/*  If all three are equal, RCU is idle. */
+#ifdef CONFIG_RCU_BOOST
+	s8 boosted_this_gp;	/* Has boosting already happened? */
+	unsigned long boost_time; /* When to start boosting (jiffies) */
+#endif /* #ifdef CONFIG_RCU_BOOST */
+#ifdef CONFIG_RCU_TRACE
+	unsigned long n_grace_periods;
+#ifdef CONFIG_RCU_BOOST
+	unsigned long n_tasks_boosted;
+	unsigned long n_exp_boosts;
+	unsigned long n_normal_boosts;
+	unsigned long n_normal_balk_blkd_tasks;
+	unsigned long n_normal_balk_gp_tasks;
+	unsigned long n_normal_balk_boost_tasks;
+	unsigned long n_normal_balk_boosted;
+	unsigned long n_normal_balk_notyet;
+	unsigned long n_normal_balk_nos;
+	unsigned long n_exp_balk_blkd_tasks;
+	unsigned long n_exp_balk_nos;
+#endif /* #ifdef CONFIG_RCU_BOOST */
+#endif /* #ifdef CONFIG_RCU_TRACE */
 };
 
 static struct rcu_preempt_ctrlblk rcu_preempt_ctrlblk = {
@@ -122,6 +184,210 @@ static int rcu_preempt_gp_in_progress(void)
 }
 
 /*
+ * Advance a ->blkd_tasks-list pointer to the next entry, instead
+ * returning NULL if at the end of the list.
+ */
+static struct list_head *rcu_next_node_entry(struct task_struct *t)
+{
+	struct list_head *np;
+
+	np = t->rcu_node_entry.next;
+	if (np == &rcu_preempt_ctrlblk.blkd_tasks)
+		np = NULL;
+	return np;
+}
+
+#ifdef CONFIG_RCU_TRACE
+
+#ifdef CONFIG_RCU_BOOST
+static void rcu_initiate_boost_trace(void);
+static void rcu_initiate_exp_boost_trace(void);
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
+/*
+ * Dump additional statistice for TINY_PREEMPT_RCU.
+ */
+static void show_tiny_preempt_stats(struct seq_file *m)
+{
+	seq_printf(m, "rcu_preempt: qlen=%ld gp=%lu g%u/p%u/c%u tasks=%c%c%c\n",
+		   rcu_preempt_ctrlblk.rcb.qlen,
+		   rcu_preempt_ctrlblk.n_grace_periods,
+		   rcu_preempt_ctrlblk.gpnum,
+		   rcu_preempt_ctrlblk.gpcpu,
+		   rcu_preempt_ctrlblk.completed,
+		   "T."[list_empty(&rcu_preempt_ctrlblk.blkd_tasks)],
+		   "N."[!rcu_preempt_ctrlblk.gp_tasks],
+		   "E."[!rcu_preempt_ctrlblk.exp_tasks]);
+#ifdef CONFIG_RCU_BOOST
+	seq_printf(m, "             ttb=%c btg=",
+		   "B."[!rcu_preempt_ctrlblk.boost_tasks]);
+	switch (rcu_preempt_ctrlblk.boosted_this_gp) {
+	case -1:
+		seq_puts(m, "exp");
+		break;
+	case 0:
+		seq_puts(m, "no");
+		break;
+	case 1:
+		seq_puts(m, "begun");
+		break;
+	case 2:
+		seq_puts(m, "done");
+		break;
+	default:
+		seq_printf(m, "?%d?", rcu_preempt_ctrlblk.boosted_this_gp);
+	}
+	seq_printf(m, " ntb=%lu neb=%lu nnb=%lu j=%04x bt=%04x\n",
+		   rcu_preempt_ctrlblk.n_tasks_boosted,
+		   rcu_preempt_ctrlblk.n_exp_boosts,
+		   rcu_preempt_ctrlblk.n_normal_boosts,
+		   (int)(jiffies & 0xffff),
+		   (int)(rcu_preempt_ctrlblk.boost_time & 0xffff));
+	seq_printf(m, "             %s: nt=%lu gt=%lu bt=%lu b=%lu ny=%lu nos=%lu\n",
+		   "normal balk",
+		   rcu_preempt_ctrlblk.n_normal_balk_blkd_tasks,
+		   rcu_preempt_ctrlblk.n_normal_balk_gp_tasks,
+		   rcu_preempt_ctrlblk.n_normal_balk_boost_tasks,
+		   rcu_preempt_ctrlblk.n_normal_balk_boosted,
+		   rcu_preempt_ctrlblk.n_normal_balk_notyet,
+		   rcu_preempt_ctrlblk.n_normal_balk_nos);
+	seq_printf(m, "             exp balk: bt=%lu nos=%lu\n",
+		   rcu_preempt_ctrlblk.n_exp_balk_blkd_tasks,
+		   rcu_preempt_ctrlblk.n_exp_balk_nos);
+#endif /* #ifdef CONFIG_RCU_BOOST */
+}
+
+#endif /* #ifdef CONFIG_RCU_TRACE */
+
+#ifdef CONFIG_RCU_BOOST
+
+#include "rtmutex_common.h"
+
+/*
+ * Carry out RCU priority boosting on the task indicated by ->boost_tasks,
+ * and advance ->boost_tasks to the next task in the ->blkd_tasks list.
+ */
+static int rcu_boost(void)
+{
+	unsigned long flags;
+	struct rt_mutex mtx;
+	struct list_head *np;
+	struct task_struct *t;
+
+	if (rcu_preempt_ctrlblk.boost_tasks == NULL)
+		return 0;  /* Nothing to boost. */
+	raw_local_irq_save(flags);
+	rcu_preempt_ctrlblk.boosted_this_gp++;
+	t = container_of(rcu_preempt_ctrlblk.boost_tasks, struct task_struct,
+			 rcu_node_entry);
+	np = rcu_next_node_entry(t);
+	rt_mutex_init_proxy_locked(&mtx, t);
+	t->rcu_boost_mutex = &mtx;
+	t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BOOSTED;
+	raw_local_irq_restore(flags);
+	rt_mutex_lock(&mtx);
+	RCU_TRACE(rcu_preempt_ctrlblk.n_tasks_boosted++);
+	rcu_preempt_ctrlblk.boosted_this_gp++;
+	rt_mutex_unlock(&mtx);
+	return rcu_preempt_ctrlblk.boost_tasks != NULL;
+}
+
+/*
+ * Check to see if it is now time to start boosting RCU readers blocking
+ * the current grace period, and, if so, tell the rcu_kthread_task to
+ * start boosting them.  If there is an expedited boost in progress,
+ * we wait for it to complete.
+ *
+ * If there are no blocked readers blocking the current grace period,
+ * return 0 to let the caller know, otherwise return 1.  Note that this
+ * return value is independent of whether or not boosting was done.
+ */
+static int rcu_initiate_boost(void)
+{
+	if (!rcu_preempt_blocked_readers_cgp()) {
+		RCU_TRACE(rcu_preempt_ctrlblk.n_normal_balk_blkd_tasks++);
+		return 0;
+	}
+	if (rcu_preempt_ctrlblk.gp_tasks != NULL &&
+	    rcu_preempt_ctrlblk.boost_tasks == NULL &&
+	    rcu_preempt_ctrlblk.boosted_this_gp == 0 &&
+	    ULONG_CMP_GE(jiffies, rcu_preempt_ctrlblk.boost_time)) {
+		rcu_preempt_ctrlblk.boost_tasks = rcu_preempt_ctrlblk.gp_tasks;
+		invoke_rcu_kthread();
+		RCU_TRACE(rcu_preempt_ctrlblk.n_normal_boosts++);
+	} else
+		RCU_TRACE(rcu_initiate_boost_trace());
+	return 1;
+}
+
+/*
+ * Initiate boosting for an expedited grace period.
+ */
+static void rcu_initiate_expedited_boost(void)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	if (!list_empty(&rcu_preempt_ctrlblk.blkd_tasks)) {
+		rcu_preempt_ctrlblk.boost_tasks =
+			rcu_preempt_ctrlblk.blkd_tasks.next;
+		rcu_preempt_ctrlblk.boosted_this_gp = -1;
+		invoke_rcu_kthread();
+		RCU_TRACE(rcu_preempt_ctrlblk.n_exp_boosts++);
+	} else
+		RCU_TRACE(rcu_initiate_exp_boost_trace());
+	raw_local_irq_restore(flags);
+}
+
+#define RCU_BOOST_DELAY_JIFFIES DIV_ROUND_UP(CONFIG_RCU_BOOST_DELAY * HZ, 1000);
+
+/*
+ * Do priority-boost accounting for the start of a new grace period.
+ */
+static void rcu_preempt_boost_start_gp(void)
+{
+	rcu_preempt_ctrlblk.boost_time = jiffies + RCU_BOOST_DELAY_JIFFIES;
+	if (rcu_preempt_ctrlblk.boosted_this_gp > 0)
+		rcu_preempt_ctrlblk.boosted_this_gp = 0;
+}
+
+#else /* #ifdef CONFIG_RCU_BOOST */
+
+/*
+ * If there is no RCU priority boosting, we don't boost.
+ */
+static int rcu_boost(void)
+{
+	return 0;
+}
+
+/*
+ * If there is no RCU priority boosting, we don't initiate boosting,
+ * but we do indicate whether there are blocked readers blocking the
+ * current grace period.
+ */
+static int rcu_initiate_boost(void)
+{
+	return rcu_preempt_blocked_readers_cgp();
+}
+
+/*
+ * If there is no RCU priority boosting, we don't initiate expedited boosting.
+ */
+static void rcu_initiate_expedited_boost(void)
+{
+}
+
+/*
+ * If there is no RCU priority boosting, nothing to do at grace-period start.
+ */
+static void rcu_preempt_boost_start_gp(void)
+{
+}
+
+#endif /* else #ifdef CONFIG_RCU_BOOST */
+
+/*
  * Record a preemptible-RCU quiescent state for the specified CPU.  Note
  * that this just means that the task currently running on the CPU is
  * in a quiescent state.  There might be any number of tasks blocked
@@ -148,11 +414,14 @@ static void rcu_preempt_cpu_qs(void)
 	rcu_preempt_ctrlblk.gpcpu = rcu_preempt_ctrlblk.gpnum;
 	current->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_NEED_QS;
 
+	/* If there is no GP then there is nothing more to do.  */
+	if (!rcu_preempt_gp_in_progress())
+		return;
 	/*
-	 * If there is no GP, or if blocked readers are still blocking GP,
-	 * then there is nothing more to do.
+	 * Check up on boosting.  If there are no readers blocking the
+	 * current grace period, leave.
 	 */
-	if (!rcu_preempt_gp_in_progress() || rcu_preempt_blocked_readers_cgp())
+	if (rcu_initiate_boost())
 		return;
 
 	/* Advance callbacks. */
@@ -164,9 +433,9 @@ static void rcu_preempt_cpu_qs(void)
 	if (!rcu_preempt_blocked_readers_any())
 		rcu_preempt_ctrlblk.rcb.donetail = rcu_preempt_ctrlblk.nexttail;
 
-	/* If there are done callbacks, make RCU_SOFTIRQ process them. */
+	/* If there are done callbacks, cause them to be invoked. */
 	if (*rcu_preempt_ctrlblk.rcb.donetail != NULL)
-		raise_softirq(RCU_SOFTIRQ);
+		invoke_rcu_kthread();
 }
 
 /*
@@ -178,12 +447,16 @@ static void rcu_preempt_start_gp(void)
 
 		/* Official start of GP. */
 		rcu_preempt_ctrlblk.gpnum++;
+		RCU_TRACE(rcu_preempt_ctrlblk.n_grace_periods++);
 
 		/* Any blocked RCU readers block new GP. */
 		if (rcu_preempt_blocked_readers_any())
 			rcu_preempt_ctrlblk.gp_tasks =
 				rcu_preempt_ctrlblk.blkd_tasks.next;
 
+		/* Set up for RCU priority boosting. */
+		rcu_preempt_boost_start_gp();
+
 		/* If there is no running reader, CPU is done with GP. */
 		if (!rcu_preempt_running_reader())
 			rcu_preempt_cpu_qs();
@@ -304,14 +577,16 @@ static void rcu_read_unlock_special(struct task_struct *t)
 		 */
 		empty = !rcu_preempt_blocked_readers_cgp();
 		empty_exp = rcu_preempt_ctrlblk.exp_tasks == NULL;
-		np = t->rcu_node_entry.next;
-		if (np == &rcu_preempt_ctrlblk.blkd_tasks)
-			np = NULL;
+		np = rcu_next_node_entry(t);
 		list_del(&t->rcu_node_entry);
 		if (&t->rcu_node_entry == rcu_preempt_ctrlblk.gp_tasks)
 			rcu_preempt_ctrlblk.gp_tasks = np;
 		if (&t->rcu_node_entry == rcu_preempt_ctrlblk.exp_tasks)
 			rcu_preempt_ctrlblk.exp_tasks = np;
+#ifdef CONFIG_RCU_BOOST
+		if (&t->rcu_node_entry == rcu_preempt_ctrlblk.boost_tasks)
+			rcu_preempt_ctrlblk.boost_tasks = np;
+#endif /* #ifdef CONFIG_RCU_BOOST */
 		INIT_LIST_HEAD(&t->rcu_node_entry);
 
 		/*
@@ -331,6 +606,14 @@ static void rcu_read_unlock_special(struct task_struct *t)
 		if (!empty_exp && rcu_preempt_ctrlblk.exp_tasks == NULL)
 			rcu_report_exp_done();
 	}
+#ifdef CONFIG_RCU_BOOST
+	/* Unboost self if was boosted. */
+	if (special & RCU_READ_UNLOCK_BOOSTED) {
+		t->rcu_read_unlock_special &= ~RCU_READ_UNLOCK_BOOSTED;
+		rt_mutex_unlock(t->rcu_boost_mutex);
+		t->rcu_boost_mutex = NULL;
+	}
+#endif /* #ifdef CONFIG_RCU_BOOST */
 	local_irq_restore(flags);
 }
 
@@ -374,7 +657,7 @@ static void rcu_preempt_check_callbacks(void)
 		rcu_preempt_cpu_qs();
 	if (&rcu_preempt_ctrlblk.rcb.rcucblist !=
 	    rcu_preempt_ctrlblk.rcb.donetail)
-		raise_softirq(RCU_SOFTIRQ);
+		invoke_rcu_kthread();
 	if (rcu_preempt_gp_in_progress() &&
 	    rcu_cpu_blocking_cur_gp() &&
 	    rcu_preempt_running_reader())
@@ -383,7 +666,7 @@ static void rcu_preempt_check_callbacks(void)
 
 /*
  * TINY_PREEMPT_RCU has an extra callback-list tail pointer to
- * update, so this is invoked from __rcu_process_callbacks() to
+ * update, so this is invoked from rcu_process_callbacks() to
  * handle that case.  Of course, it is invoked for all flavors of
  * RCU, but RCU callbacks can appear only on one of the lists, and
  * neither ->nexttail nor ->donetail can possibly be NULL, so there
@@ -400,7 +683,7 @@ static void rcu_preempt_remove_callbacks(struct rcu_ctrlblk *rcp)
  */
 static void rcu_preempt_process_callbacks(void)
 {
-	__rcu_process_callbacks(&rcu_preempt_ctrlblk.rcb);
+	rcu_process_callbacks(&rcu_preempt_ctrlblk.rcb);
 }
 
 /*
@@ -417,6 +700,7 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu))
 	local_irq_save(flags);
 	*rcu_preempt_ctrlblk.nexttail = head;
 	rcu_preempt_ctrlblk.nexttail = &head->next;
+	RCU_TRACE(rcu_preempt_ctrlblk.rcb.qlen++);
 	rcu_preempt_start_gp();  /* checks to see if GP needed. */
 	local_irq_restore(flags);
 }
@@ -532,6 +816,7 @@ void synchronize_rcu_expedited(void)
 
 	/* Wait for tail of ->blkd_tasks list to drain. */
 	if (rcu_preempted_readers_exp())
+		rcu_initiate_expedited_boost();
 		wait_event(sync_rcu_preempt_exp_wq,
 			   !rcu_preempted_readers_exp());
 
@@ -572,6 +857,27 @@ void exit_rcu(void)
 
 #else /* #ifdef CONFIG_TINY_PREEMPT_RCU */
 
+#ifdef CONFIG_RCU_TRACE
+
+/*
+ * Because preemptible RCU does not exist, it is not necessary to
+ * dump out its statistics.
+ */
+static void show_tiny_preempt_stats(struct seq_file *m)
+{
+}
+
+#endif /* #ifdef CONFIG_RCU_TRACE */
+
+/*
+ * Because preemptible RCU does not exist, it is never necessary to
+ * boost preempted RCU readers.
+ */
+static int rcu_boost(void)
+{
+	return 0;
+}
+
 /*
  * Because preemptible RCU does not exist, it never has any callbacks
  * to check.
@@ -599,17 +905,116 @@ static void rcu_preempt_process_callbacks(void)
 #endif /* #else #ifdef CONFIG_TINY_PREEMPT_RCU */
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
-
 #include <linux/kernel_stat.h>
 
 /*
  * During boot, we forgive RCU lockdep issues.  After this function is
  * invoked, we start taking RCU lockdep issues seriously.
  */
-void rcu_scheduler_starting(void)
+void __init rcu_scheduler_starting(void)
 {
 	WARN_ON(nr_context_switches() > 0);
 	rcu_scheduler_active = 1;
 }
 
 #endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+
+#ifdef CONFIG_RCU_BOOST
+#define RCU_BOOST_PRIO CONFIG_RCU_BOOST_PRIO
+#else /* #ifdef CONFIG_RCU_BOOST */
+#define RCU_BOOST_PRIO 1
+#endif /* #else #ifdef CONFIG_RCU_BOOST */
+
+#ifdef CONFIG_RCU_TRACE
+
+#ifdef CONFIG_RCU_BOOST
+
+static void rcu_initiate_boost_trace(void)
+{
+	if (rcu_preempt_ctrlblk.gp_tasks == NULL)
+		rcu_preempt_ctrlblk.n_normal_balk_gp_tasks++;
+	else if (rcu_preempt_ctrlblk.boost_tasks != NULL)
+		rcu_preempt_ctrlblk.n_normal_balk_boost_tasks++;
+	else if (rcu_preempt_ctrlblk.boosted_this_gp != 0)
+		rcu_preempt_ctrlblk.n_normal_balk_boosted++;
+	else if (!ULONG_CMP_GE(jiffies, rcu_preempt_ctrlblk.boost_time))
+		rcu_preempt_ctrlblk.n_normal_balk_notyet++;
+	else
+		rcu_preempt_ctrlblk.n_normal_balk_nos++;
+}
+
+static void rcu_initiate_exp_boost_trace(void)
+{
+	if (list_empty(&rcu_preempt_ctrlblk.blkd_tasks))
+		rcu_preempt_ctrlblk.n_exp_balk_blkd_tasks++;
+	else
+		rcu_preempt_ctrlblk.n_exp_balk_nos++;
+}
+
+#endif /* #ifdef CONFIG_RCU_BOOST */
+
+static void rcu_trace_sub_qlen(struct rcu_ctrlblk *rcp, int n)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	rcp->qlen -= n;
+	raw_local_irq_restore(flags);
+}
+
+/*
+ * Dump statistics for TINY_RCU, such as they are.
+ */
+static int show_tiny_stats(struct seq_file *m, void *unused)
+{
+	show_tiny_preempt_stats(m);
+	seq_printf(m, "rcu_sched: qlen: %ld\n", rcu_sched_ctrlblk.qlen);
+	seq_printf(m, "rcu_bh: qlen: %ld\n", rcu_bh_ctrlblk.qlen);
+	return 0;
+}
+
+static int show_tiny_stats_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, show_tiny_stats, NULL);
+}
+
+static const struct file_operations show_tiny_stats_fops = {
+	.owner = THIS_MODULE,
+	.open = show_tiny_stats_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static struct dentry *rcudir;
+
+static int __init rcutiny_trace_init(void)
+{
+	struct dentry *retval;
+
+	rcudir = debugfs_create_dir("rcu", NULL);
+	if (!rcudir)
+		goto free_out;
+	retval = debugfs_create_file("rcudata", 0444, rcudir,
+				     NULL, &show_tiny_stats_fops);
+	if (!retval)
+		goto free_out;
+	return 0;
+free_out:
+	debugfs_remove_recursive(rcudir);
+	return 1;
+}
+
+static void __exit rcutiny_trace_cleanup(void)
+{
+	debugfs_remove_recursive(rcudir);
+}
+
+module_init(rcutiny_trace_init);
+module_exit(rcutiny_trace_cleanup);
+
+MODULE_AUTHOR("Paul E. McKenney");
+MODULE_DESCRIPTION("Read-Copy Update tracing for tiny implementation");
+MODULE_LICENSE("GPL");
+
+#endif /* #ifdef CONFIG_RCU_TRACE */
diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 9d8e8fb2515..89613f97ff2 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -47,6 +47,7 @@
 #include <linux/srcu.h>
 #include <linux/slab.h>
 #include <asm/byteorder.h>
+#include <linux/sched.h>
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Paul E. McKenney <paulmck@us.ibm.com> and "
@@ -64,6 +65,9 @@ static int irqreader = 1;	/* RCU readers from irq (timers). */
 static int fqs_duration = 0;	/* Duration of bursts (us), 0 to disable. */
 static int fqs_holdoff = 0;	/* Hold time within burst (us). */
 static int fqs_stutter = 3;	/* Wait time between bursts (s). */
+static int test_boost = 1;	/* Test RCU prio boost: 0=no, 1=maybe, 2=yes. */
+static int test_boost_interval = 7; /* Interval between boost tests, seconds. */
+static int test_boost_duration = 4; /* Duration of each boost test, seconds. */
 static char *torture_type = "rcu"; /* What RCU implementation to torture. */
 
 module_param(nreaders, int, 0444);
@@ -88,6 +92,12 @@ module_param(fqs_holdoff, int, 0444);
 MODULE_PARM_DESC(fqs_holdoff, "Holdoff time within fqs bursts (us)");
 module_param(fqs_stutter, int, 0444);
 MODULE_PARM_DESC(fqs_stutter, "Wait time between fqs bursts (s)");
+module_param(test_boost, int, 0444);
+MODULE_PARM_DESC(test_boost, "Test RCU prio boost: 0=no, 1=maybe, 2=yes.");
+module_param(test_boost_interval, int, 0444);
+MODULE_PARM_DESC(test_boost_interval, "Interval between boost tests, seconds.");
+module_param(test_boost_duration, int, 0444);
+MODULE_PARM_DESC(test_boost_duration, "Duration of each boost test, seconds.");
 module_param(torture_type, charp, 0444);
 MODULE_PARM_DESC(torture_type, "Type of RCU to torture (rcu, rcu_bh, srcu)");
 
@@ -109,6 +119,7 @@ static struct task_struct *stats_task;
 static struct task_struct *shuffler_task;
 static struct task_struct *stutter_task;
 static struct task_struct *fqs_task;
+static struct task_struct *boost_tasks[NR_CPUS];
 
 #define RCU_TORTURE_PIPE_LEN 10
 
@@ -134,6 +145,12 @@ static atomic_t n_rcu_torture_alloc_fail;
 static atomic_t n_rcu_torture_free;
 static atomic_t n_rcu_torture_mberror;
 static atomic_t n_rcu_torture_error;
+static long n_rcu_torture_boost_ktrerror;
+static long n_rcu_torture_boost_rterror;
+static long n_rcu_torture_boost_allocerror;
+static long n_rcu_torture_boost_afferror;
+static long n_rcu_torture_boost_failure;
+static long n_rcu_torture_boosts;
 static long n_rcu_torture_timers;
 static struct list_head rcu_torture_removed;
 static cpumask_var_t shuffle_tmp_mask;
@@ -147,6 +164,16 @@ static int stutter_pause_test;
 #endif
 int rcutorture_runnable = RCUTORTURE_RUNNABLE_INIT;
 
+#ifdef CONFIG_RCU_BOOST
+#define rcu_can_boost() 1
+#else /* #ifdef CONFIG_RCU_BOOST */
+#define rcu_can_boost() 0
+#endif /* #else #ifdef CONFIG_RCU_BOOST */
+
+static unsigned long boost_starttime;	/* jiffies of next boost test start. */
+DEFINE_MUTEX(boost_mutex);		/* protect setting boost_starttime */
+					/*  and boost task create/destroy. */
+
 /* Mediate rmmod and system shutdown.  Concurrent rmmod & shutdown illegal! */
 
 #define FULLSTOP_DONTSTOP 0	/* Normal operation. */
@@ -277,6 +304,7 @@ struct rcu_torture_ops {
 	void (*fqs)(void);
 	int (*stats)(char *page);
 	int irq_capable;
+	int can_boost;
 	char *name;
 };
 
@@ -366,6 +394,7 @@ static struct rcu_torture_ops rcu_ops = {
 	.fqs		= rcu_force_quiescent_state,
 	.stats		= NULL,
 	.irq_capable	= 1,
+	.can_boost	= rcu_can_boost(),
 	.name		= "rcu"
 };
 
@@ -408,6 +437,7 @@ static struct rcu_torture_ops rcu_sync_ops = {
 	.fqs		= rcu_force_quiescent_state,
 	.stats		= NULL,
 	.irq_capable	= 1,
+	.can_boost	= rcu_can_boost(),
 	.name		= "rcu_sync"
 };
 
@@ -424,6 +454,7 @@ static struct rcu_torture_ops rcu_expedited_ops = {
 	.fqs		= rcu_force_quiescent_state,
 	.stats		= NULL,
 	.irq_capable	= 1,
+	.can_boost	= rcu_can_boost(),
 	.name		= "rcu_expedited"
 };
 
@@ -684,6 +715,110 @@ static struct rcu_torture_ops sched_expedited_ops = {
 };
 
 /*
+ * RCU torture priority-boost testing.  Runs one real-time thread per
+ * CPU for moderate bursts, repeatedly registering RCU callbacks and
+ * spinning waiting for them to be invoked.  If a given callback takes
+ * too long to be invoked, we assume that priority inversion has occurred.
+ */
+
+struct rcu_boost_inflight {
+	struct rcu_head rcu;
+	int inflight;
+};
+
+static void rcu_torture_boost_cb(struct rcu_head *head)
+{
+	struct rcu_boost_inflight *rbip =
+		container_of(head, struct rcu_boost_inflight, rcu);
+
+	smp_mb(); /* Ensure RCU-core accesses precede clearing ->inflight */
+	rbip->inflight = 0;
+}
+
+static int rcu_torture_boost(void *arg)
+{
+	unsigned long call_rcu_time;
+	unsigned long endtime;
+	unsigned long oldstarttime;
+	struct rcu_boost_inflight rbi = { .inflight = 0 };
+	struct sched_param sp;
+
+	VERBOSE_PRINTK_STRING("rcu_torture_boost started");
+
+	/* Set real-time priority. */
+	sp.sched_priority = 1;
+	if (sched_setscheduler(current, SCHED_FIFO, &sp) < 0) {
+		VERBOSE_PRINTK_STRING("rcu_torture_boost RT prio failed!");
+		n_rcu_torture_boost_rterror++;
+	}
+
+	/* Each pass through the following loop does one boost-test cycle. */
+	do {
+		/* Wait for the next test interval. */
+		oldstarttime = boost_starttime;
+		while (jiffies - oldstarttime > ULONG_MAX / 2) {
+			schedule_timeout_uninterruptible(1);
+			rcu_stutter_wait("rcu_torture_boost");
+			if (kthread_should_stop() ||
+			    fullstop != FULLSTOP_DONTSTOP)
+				goto checkwait;
+		}
+
+		/* Do one boost-test interval. */
+		endtime = oldstarttime + test_boost_duration * HZ;
+		call_rcu_time = jiffies;
+		while (jiffies - endtime > ULONG_MAX / 2) {
+			/* If we don't have a callback in flight, post one. */
+			if (!rbi.inflight) {
+				smp_mb(); /* RCU core before ->inflight = 1. */
+				rbi.inflight = 1;
+				call_rcu(&rbi.rcu, rcu_torture_boost_cb);
+				if (jiffies - call_rcu_time >
+					 test_boost_duration * HZ - HZ / 2) {
+					VERBOSE_PRINTK_STRING("rcu_torture_boost boosting failed");
+					n_rcu_torture_boost_failure++;
+				}
+				call_rcu_time = jiffies;
+			}
+			cond_resched();
+			rcu_stutter_wait("rcu_torture_boost");
+			if (kthread_should_stop() ||
+			    fullstop != FULLSTOP_DONTSTOP)
+				goto checkwait;
+		}
+
+		/*
+		 * Set the start time of the next test interval.
+		 * Yes, this is vulnerable to long delays, but such
+		 * delays simply cause a false negative for the next
+		 * interval.  Besides, we are running at RT priority,
+		 * so delays should be relatively rare.
+		 */
+		while (oldstarttime == boost_starttime) {
+			if (mutex_trylock(&boost_mutex)) {
+				boost_starttime = jiffies +
+						  test_boost_interval * HZ;
+				n_rcu_torture_boosts++;
+				mutex_unlock(&boost_mutex);
+				break;
+			}
+			schedule_timeout_uninterruptible(1);
+		}
+
+		/* Go do the stutter. */
+checkwait:	rcu_stutter_wait("rcu_torture_boost");
+	} while (!kthread_should_stop() && fullstop  == FULLSTOP_DONTSTOP);
+
+	/* Clean up and exit. */
+	VERBOSE_PRINTK_STRING("rcu_torture_boost task stopping");
+	rcutorture_shutdown_absorb("rcu_torture_boost");
+	while (!kthread_should_stop() || rbi.inflight)
+		schedule_timeout_uninterruptible(1);
+	smp_mb(); /* order accesses to ->inflight before stack-frame death. */
+	return 0;
+}
+
+/*
  * RCU torture force-quiescent-state kthread.  Repeatedly induces
  * bursts of calls to force_quiescent_state(), increasing the probability
  * of occurrence of some important types of race conditions.
@@ -933,7 +1068,8 @@ rcu_torture_printk(char *page)
 	cnt += sprintf(&page[cnt], "%s%s ", torture_type, TORTURE_FLAG);
 	cnt += sprintf(&page[cnt],
 		       "rtc: %p ver: %ld tfle: %d rta: %d rtaf: %d rtf: %d "
-		       "rtmbe: %d nt: %ld",
+		       "rtmbe: %d rtbke: %ld rtbre: %ld rtbae: %ld rtbafe: %ld "
+		       "rtbf: %ld rtb: %ld nt: %ld",
 		       rcu_torture_current,
 		       rcu_torture_current_version,
 		       list_empty(&rcu_torture_freelist),
@@ -941,8 +1077,19 @@ rcu_torture_printk(char *page)
 		       atomic_read(&n_rcu_torture_alloc_fail),
 		       atomic_read(&n_rcu_torture_free),
 		       atomic_read(&n_rcu_torture_mberror),
+		       n_rcu_torture_boost_ktrerror,
+		       n_rcu_torture_boost_rterror,
+		       n_rcu_torture_boost_allocerror,
+		       n_rcu_torture_boost_afferror,
+		       n_rcu_torture_boost_failure,
+		       n_rcu_torture_boosts,
 		       n_rcu_torture_timers);
-	if (atomic_read(&n_rcu_torture_mberror) != 0)
+	if (atomic_read(&n_rcu_torture_mberror) != 0 ||
+	    n_rcu_torture_boost_ktrerror != 0 ||
+	    n_rcu_torture_boost_rterror != 0 ||
+	    n_rcu_torture_boost_allocerror != 0 ||
+	    n_rcu_torture_boost_afferror != 0 ||
+	    n_rcu_torture_boost_failure != 0)
 		cnt += sprintf(&page[cnt], " !!!");
 	cnt += sprintf(&page[cnt], "\n%s%s ", torture_type, TORTURE_FLAG);
 	if (i > 1) {
@@ -1094,22 +1241,91 @@ rcu_torture_stutter(void *arg)
 }
 
 static inline void
-rcu_torture_print_module_parms(char *tag)
+rcu_torture_print_module_parms(struct rcu_torture_ops *cur_ops, char *tag)
 {
 	printk(KERN_ALERT "%s" TORTURE_FLAG
 		"--- %s: nreaders=%d nfakewriters=%d "
 		"stat_interval=%d verbose=%d test_no_idle_hz=%d "
 		"shuffle_interval=%d stutter=%d irqreader=%d "
-		"fqs_duration=%d fqs_holdoff=%d fqs_stutter=%d\n",
+		"fqs_duration=%d fqs_holdoff=%d fqs_stutter=%d "
+		"test_boost=%d/%d test_boost_interval=%d "
+		"test_boost_duration=%d\n",
 		torture_type, tag, nrealreaders, nfakewriters,
 		stat_interval, verbose, test_no_idle_hz, shuffle_interval,
-		stutter, irqreader, fqs_duration, fqs_holdoff, fqs_stutter);
+		stutter, irqreader, fqs_duration, fqs_holdoff, fqs_stutter,
+		test_boost, cur_ops->can_boost,
+		test_boost_interval, test_boost_duration);
 }
 
-static struct notifier_block rcutorture_nb = {
+static struct notifier_block rcutorture_shutdown_nb = {
 	.notifier_call = rcutorture_shutdown_notify,
 };
 
+static void rcutorture_booster_cleanup(int cpu)
+{
+	struct task_struct *t;
+
+	if (boost_tasks[cpu] == NULL)
+		return;
+	mutex_lock(&boost_mutex);
+	VERBOSE_PRINTK_STRING("Stopping rcu_torture_boost task");
+	t = boost_tasks[cpu];
+	boost_tasks[cpu] = NULL;
+	mutex_unlock(&boost_mutex);
+
+	/* This must be outside of the mutex, otherwise deadlock! */
+	kthread_stop(t);
+}
+
+static int rcutorture_booster_init(int cpu)
+{
+	int retval;
+
+	if (boost_tasks[cpu] != NULL)
+		return 0;  /* Already created, nothing more to do. */
+
+	/* Don't allow time recalculation while creating a new task. */
+	mutex_lock(&boost_mutex);
+	VERBOSE_PRINTK_STRING("Creating rcu_torture_boost task");
+	boost_tasks[cpu] = kthread_create(rcu_torture_boost, NULL,
+					  "rcu_torture_boost");
+	if (IS_ERR(boost_tasks[cpu])) {
+		retval = PTR_ERR(boost_tasks[cpu]);
+		VERBOSE_PRINTK_STRING("rcu_torture_boost task create failed");
+		n_rcu_torture_boost_ktrerror++;
+		boost_tasks[cpu] = NULL;
+		mutex_unlock(&boost_mutex);
+		return retval;
+	}
+	kthread_bind(boost_tasks[cpu], cpu);
+	wake_up_process(boost_tasks[cpu]);
+	mutex_unlock(&boost_mutex);
+	return 0;
+}
+
+static int rcutorture_cpu_notify(struct notifier_block *self,
+				 unsigned long action, void *hcpu)
+{
+	long cpu = (long)hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+	case CPU_DOWN_FAILED:
+		(void)rcutorture_booster_init(cpu);
+		break;
+	case CPU_DOWN_PREPARE:
+		rcutorture_booster_cleanup(cpu);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block rcutorture_cpu_nb = {
+	.notifier_call = rcutorture_cpu_notify,
+};
+
 static void
 rcu_torture_cleanup(void)
 {
@@ -1127,7 +1343,7 @@ rcu_torture_cleanup(void)
 	}
 	fullstop = FULLSTOP_RMMOD;
 	mutex_unlock(&fullstop_mutex);
-	unregister_reboot_notifier(&rcutorture_nb);
+	unregister_reboot_notifier(&rcutorture_shutdown_nb);
 	if (stutter_task) {
 		VERBOSE_PRINTK_STRING("Stopping rcu_torture_stutter task");
 		kthread_stop(stutter_task);
@@ -1184,6 +1400,12 @@ rcu_torture_cleanup(void)
 		kthread_stop(fqs_task);
 	}
 	fqs_task = NULL;
+	if ((test_boost == 1 && cur_ops->can_boost) ||
+	    test_boost == 2) {
+		unregister_cpu_notifier(&rcutorture_cpu_nb);
+		for_each_possible_cpu(i)
+			rcutorture_booster_cleanup(i);
+	}
 
 	/* Wait for all RCU callbacks to fire.  */
 
@@ -1195,9 +1417,9 @@ rcu_torture_cleanup(void)
 	if (cur_ops->cleanup)
 		cur_ops->cleanup();
 	if (atomic_read(&n_rcu_torture_error))
-		rcu_torture_print_module_parms("End of test: FAILURE");
+		rcu_torture_print_module_parms(cur_ops, "End of test: FAILURE");
 	else
-		rcu_torture_print_module_parms("End of test: SUCCESS");
+		rcu_torture_print_module_parms(cur_ops, "End of test: SUCCESS");
 }
 
 static int __init
@@ -1242,7 +1464,7 @@ rcu_torture_init(void)
 		nrealreaders = nreaders;
 	else
 		nrealreaders = 2 * num_online_cpus();
-	rcu_torture_print_module_parms("Start of test");
+	rcu_torture_print_module_parms(cur_ops, "Start of test");
 	fullstop = FULLSTOP_DONTSTOP;
 
 	/* Set up the freelist. */
@@ -1263,6 +1485,12 @@ rcu_torture_init(void)
 	atomic_set(&n_rcu_torture_free, 0);
 	atomic_set(&n_rcu_torture_mberror, 0);
 	atomic_set(&n_rcu_torture_error, 0);
+	n_rcu_torture_boost_ktrerror = 0;
+	n_rcu_torture_boost_rterror = 0;
+	n_rcu_torture_boost_allocerror = 0;
+	n_rcu_torture_boost_afferror = 0;
+	n_rcu_torture_boost_failure = 0;
+	n_rcu_torture_boosts = 0;
 	for (i = 0; i < RCU_TORTURE_PIPE_LEN + 1; i++)
 		atomic_set(&rcu_torture_wcount[i], 0);
 	for_each_possible_cpu(cpu) {
@@ -1376,7 +1604,27 @@ rcu_torture_init(void)
 			goto unwind;
 		}
 	}
-	register_reboot_notifier(&rcutorture_nb);
+	if (test_boost_interval < 1)
+		test_boost_interval = 1;
+	if (test_boost_duration < 2)
+		test_boost_duration = 2;
+	if ((test_boost == 1 && cur_ops->can_boost) ||
+	    test_boost == 2) {
+		int retval;
+
+		boost_starttime = jiffies + test_boost_interval * HZ;
+		register_cpu_notifier(&rcutorture_cpu_nb);
+		for_each_possible_cpu(i) {
+			if (cpu_is_offline(i))
+				continue;  /* Heuristic: CPU can go offline. */
+			retval = rcutorture_booster_init(i);
+			if (retval < 0) {
+				firsterr = retval;
+				goto unwind;
+			}
+		}
+	}
+	register_reboot_notifier(&rcutorture_shutdown_nb);
 	mutex_unlock(&fullstop_mutex);
 	return 0;
 
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index ccdc04c4798..dd4aea806f8 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -67,9 +67,6 @@ static struct lock_class_key rcu_node_class[NUM_RCU_LVLS];
 	.gpnum = -300, \
 	.completed = -300, \
 	.onofflock = __RAW_SPIN_LOCK_UNLOCKED(&structname.onofflock), \
-	.orphan_cbs_list = NULL, \
-	.orphan_cbs_tail = &structname.orphan_cbs_list, \
-	.orphan_qlen = 0, \
 	.fqslock = __RAW_SPIN_LOCK_UNLOCKED(&structname.fqslock), \
 	.n_force_qs = 0, \
 	.n_force_qs_ngp = 0, \
@@ -367,8 +364,8 @@ void rcu_irq_exit(void)
 	WARN_ON_ONCE(rdtp->dynticks & 0x1);
 
 	/* If the interrupt queued a callback, get out of dyntick mode. */
-	if (__get_cpu_var(rcu_sched_data).nxtlist ||
-	    __get_cpu_var(rcu_bh_data).nxtlist)
+	if (__this_cpu_read(rcu_sched_data.nxtlist) ||
+	    __this_cpu_read(rcu_bh_data.nxtlist))
 		set_need_resched();
 }
 
@@ -620,9 +617,17 @@ static void __init check_cpu_stall_init(void)
 static void __note_new_gpnum(struct rcu_state *rsp, struct rcu_node *rnp, struct rcu_data *rdp)
 {
 	if (rdp->gpnum != rnp->gpnum) {
-		rdp->qs_pending = 1;
-		rdp->passed_quiesc = 0;
+		/*
+		 * If the current grace period is waiting for this CPU,
+		 * set up to detect a quiescent state, otherwise don't
+		 * go looking for one.
+		 */
 		rdp->gpnum = rnp->gpnum;
+		if (rnp->qsmask & rdp->grpmask) {
+			rdp->qs_pending = 1;
+			rdp->passed_quiesc = 0;
+		} else
+			rdp->qs_pending = 0;
 	}
 }
 
@@ -681,6 +686,24 @@ __rcu_process_gp_end(struct rcu_state *rsp, struct rcu_node *rnp, struct rcu_dat
 
 		/* Remember that we saw this grace-period completion. */
 		rdp->completed = rnp->completed;
+
+		/*
+		 * If we were in an extended quiescent state, we may have
+		 * missed some grace periods that others CPUs handled on
+		 * our behalf. Catch up with this state to avoid noting
+		 * spurious new grace periods.  If another grace period
+		 * has started, then rnp->gpnum will have advanced, so
+		 * we will detect this later on.
+		 */
+		if (ULONG_CMP_LT(rdp->gpnum, rdp->completed))
+			rdp->gpnum = rdp->completed;
+
+		/*
+		 * If RCU does not need a quiescent state from this CPU,
+		 * then make sure that this CPU doesn't go looking for one.
+		 */
+		if ((rnp->qsmask & rdp->grpmask) == 0)
+			rdp->qs_pending = 0;
 	}
 }
 
@@ -984,53 +1007,31 @@ rcu_check_quiescent_state(struct rcu_state *rsp, struct rcu_data *rdp)
 #ifdef CONFIG_HOTPLUG_CPU
 
 /*
- * Move a dying CPU's RCU callbacks to the ->orphan_cbs_list for the
- * specified flavor of RCU.  The callbacks will be adopted by the next
- * _rcu_barrier() invocation or by the CPU_DEAD notifier, whichever
- * comes first.  Because this is invoked from the CPU_DYING notifier,
- * irqs are already disabled.
+ * Move a dying CPU's RCU callbacks to online CPU's callback list.
+ * Synchronization is not required because this function executes
+ * in stop_machine() context.
  */
-static void rcu_send_cbs_to_orphanage(struct rcu_state *rsp)
+static void rcu_send_cbs_to_online(struct rcu_state *rsp)
 {
 	int i;
+	/* current DYING CPU is cleared in the cpu_online_mask */
+	int receive_cpu = cpumask_any(cpu_online_mask);
 	struct rcu_data *rdp = this_cpu_ptr(rsp->rda);
+	struct rcu_data *receive_rdp = per_cpu_ptr(rsp->rda, receive_cpu);
 
 	if (rdp->nxtlist == NULL)
 		return;  /* irqs disabled, so comparison is stable. */
-	raw_spin_lock(&rsp->onofflock);  /* irqs already disabled. */
-	*rsp->orphan_cbs_tail = rdp->nxtlist;
-	rsp->orphan_cbs_tail = rdp->nxttail[RCU_NEXT_TAIL];
+
+	*receive_rdp->nxttail[RCU_NEXT_TAIL] = rdp->nxtlist;
+	receive_rdp->nxttail[RCU_NEXT_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
+	receive_rdp->qlen += rdp->qlen;
+	receive_rdp->n_cbs_adopted += rdp->qlen;
+	rdp->n_cbs_orphaned += rdp->qlen;
+
 	rdp->nxtlist = NULL;
 	for (i = 0; i < RCU_NEXT_SIZE; i++)
 		rdp->nxttail[i] = &rdp->nxtlist;
-	rsp->orphan_qlen += rdp->qlen;
-	rdp->n_cbs_orphaned += rdp->qlen;
 	rdp->qlen = 0;
-	raw_spin_unlock(&rsp->onofflock);  /* irqs remain disabled. */
-}
-
-/*
- * Adopt previously orphaned RCU callbacks.
- */
-static void rcu_adopt_orphan_cbs(struct rcu_state *rsp)
-{
-	unsigned long flags;
-	struct rcu_data *rdp;
-
-	raw_spin_lock_irqsave(&rsp->onofflock, flags);
-	rdp = this_cpu_ptr(rsp->rda);
-	if (rsp->orphan_cbs_list == NULL) {
-		raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
-		return;
-	}
-	*rdp->nxttail[RCU_NEXT_TAIL] = rsp->orphan_cbs_list;
-	rdp->nxttail[RCU_NEXT_TAIL] = rsp->orphan_cbs_tail;
-	rdp->qlen += rsp->orphan_qlen;
-	rdp->n_cbs_adopted += rsp->orphan_qlen;
-	rsp->orphan_cbs_list = NULL;
-	rsp->orphan_cbs_tail = &rsp->orphan_cbs_list;
-	rsp->orphan_qlen = 0;
-	raw_spin_unlock_irqrestore(&rsp->onofflock, flags);
 }
 
 /*
@@ -1081,8 +1082,6 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp)
 		raw_spin_unlock_irqrestore(&rnp->lock, flags);
 	if (need_report & RCU_OFL_TASKS_EXP_GP)
 		rcu_report_exp_rnp(rsp, rnp);
-
-	rcu_adopt_orphan_cbs(rsp);
 }
 
 /*
@@ -1100,11 +1099,7 @@ static void rcu_offline_cpu(int cpu)
 
 #else /* #ifdef CONFIG_HOTPLUG_CPU */
 
-static void rcu_send_cbs_to_orphanage(struct rcu_state *rsp)
-{
-}
-
-static void rcu_adopt_orphan_cbs(struct rcu_state *rsp)
+static void rcu_send_cbs_to_online(struct rcu_state *rsp)
 {
 }
 
@@ -1440,22 +1435,11 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	 */
 	local_irq_save(flags);
 	rdp = this_cpu_ptr(rsp->rda);
-	rcu_process_gp_end(rsp, rdp);
-	check_for_new_grace_period(rsp, rdp);
 
 	/* Add the callback to our list. */
 	*rdp->nxttail[RCU_NEXT_TAIL] = head;
 	rdp->nxttail[RCU_NEXT_TAIL] = &head->next;
 
-	/* Start a new grace period if one not already started. */
-	if (!rcu_gp_in_progress(rsp)) {
-		unsigned long nestflag;
-		struct rcu_node *rnp_root = rcu_get_root(rsp);
-
-		raw_spin_lock_irqsave(&rnp_root->lock, nestflag);
-		rcu_start_gp(rsp, nestflag);  /* releases rnp_root->lock. */
-	}
-
 	/*
 	 * Force the grace period if too many callbacks or too long waiting.
 	 * Enforce hysteresis, and don't invoke force_quiescent_state()
@@ -1464,12 +1448,27 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu),
 	 * is the only one waiting for a grace period to complete.
 	 */
 	if (unlikely(++rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) {
-		rdp->blimit = LONG_MAX;
-		if (rsp->n_force_qs == rdp->n_force_qs_snap &&
-		    *rdp->nxttail[RCU_DONE_TAIL] != head)
-			force_quiescent_state(rsp, 0);
-		rdp->n_force_qs_snap = rsp->n_force_qs;
-		rdp->qlen_last_fqs_check = rdp->qlen;
+
+		/* Are we ignoring a completed grace period? */
+		rcu_process_gp_end(rsp, rdp);
+		check_for_new_grace_period(rsp, rdp);
+
+		/* Start a new grace period if one not already started. */
+		if (!rcu_gp_in_progress(rsp)) {
+			unsigned long nestflag;
+			struct rcu_node *rnp_root = rcu_get_root(rsp);
+
+			raw_spin_lock_irqsave(&rnp_root->lock, nestflag);
+			rcu_start_gp(rsp, nestflag);  /* rlses rnp_root->lock */
+		} else {
+			/* Give the grace period a kick. */
+			rdp->blimit = LONG_MAX;
+			if (rsp->n_force_qs == rdp->n_force_qs_snap &&
+			    *rdp->nxttail[RCU_DONE_TAIL] != head)
+				force_quiescent_state(rsp, 0);
+			rdp->n_force_qs_snap = rsp->n_force_qs;
+			rdp->qlen_last_fqs_check = rdp->qlen;
+		}
 	} else if (ULONG_CMP_LT(ACCESS_ONCE(rsp->jiffies_force_qs), jiffies))
 		force_quiescent_state(rsp, 1);
 	local_irq_restore(flags);
@@ -1699,13 +1698,12 @@ static void _rcu_barrier(struct rcu_state *rsp,
 	 * decrement rcu_barrier_cpu_count -- otherwise the first CPU
 	 * might complete its grace period before all of the other CPUs
 	 * did their increment, causing this function to return too
-	 * early.
+	 * early.  Note that on_each_cpu() disables irqs, which prevents
+	 * any CPUs from coming online or going offline until each online
+	 * CPU has queued its RCU-barrier callback.
 	 */
 	atomic_set(&rcu_barrier_cpu_count, 1);
-	preempt_disable(); /* stop CPU_DYING from filling orphan_cbs_list */
-	rcu_adopt_orphan_cbs(rsp);
 	on_each_cpu(rcu_barrier_func, (void *)call_rcu_func, 1);
-	preempt_enable(); /* CPU_DYING can again fill orphan_cbs_list */
 	if (atomic_dec_and_test(&rcu_barrier_cpu_count))
 		complete(&rcu_barrier_completion);
 	wait_for_completion(&rcu_barrier_completion);
@@ -1831,18 +1829,13 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self,
 	case CPU_DYING:
 	case CPU_DYING_FROZEN:
 		/*
-		 * preempt_disable() in _rcu_barrier() prevents stop_machine(),
-		 * so when "on_each_cpu(rcu_barrier_func, (void *)type, 1);"
-		 * returns, all online cpus have queued rcu_barrier_func().
-		 * The dying CPU clears its cpu_online_mask bit and
-		 * moves all of its RCU callbacks to ->orphan_cbs_list
-		 * in the context of stop_machine(), so subsequent calls
-		 * to _rcu_barrier() will adopt these callbacks and only
-		 * then queue rcu_barrier_func() on all remaining CPUs.
+		 * The whole machine is "stopped" except this CPU, so we can
+		 * touch any data without introducing corruption. We send the
+		 * dying CPU's callbacks to an arbitrarily chosen online CPU.
 		 */
-		rcu_send_cbs_to_orphanage(&rcu_bh_state);
-		rcu_send_cbs_to_orphanage(&rcu_sched_state);
-		rcu_preempt_send_cbs_to_orphanage();
+		rcu_send_cbs_to_online(&rcu_bh_state);
+		rcu_send_cbs_to_online(&rcu_sched_state);
+		rcu_preempt_send_cbs_to_online();
 		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
@@ -1880,8 +1873,9 @@ static void __init rcu_init_levelspread(struct rcu_state *rsp)
 {
 	int i;
 
-	for (i = NUM_RCU_LVLS - 1; i >= 0; i--)
+	for (i = NUM_RCU_LVLS - 1; i > 0; i--)
 		rsp->levelspread[i] = CONFIG_RCU_FANOUT;
+	rsp->levelspread[0] = RCU_FANOUT_LEAF;
 }
 #else /* #ifdef CONFIG_RCU_FANOUT_EXACT */
 static void __init rcu_init_levelspread(struct rcu_state *rsp)
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index 91d4170c5c1..e8f057e44e3 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -31,46 +31,51 @@
 /*
  * Define shape of hierarchy based on NR_CPUS and CONFIG_RCU_FANOUT.
  * In theory, it should be possible to add more levels straightforwardly.
- * In practice, this has not been tested, so there is probably some
- * bug somewhere.
+ * In practice, this did work well going from three levels to four.
+ * Of course, your mileage may vary.
  */
 #define MAX_RCU_LVLS 4
-#define RCU_FANOUT	      (CONFIG_RCU_FANOUT)
-#define RCU_FANOUT_SQ	      (RCU_FANOUT * RCU_FANOUT)
-#define RCU_FANOUT_CUBE	      (RCU_FANOUT_SQ * RCU_FANOUT)
-#define RCU_FANOUT_FOURTH     (RCU_FANOUT_CUBE * RCU_FANOUT)
-
-#if NR_CPUS <= RCU_FANOUT
+#if CONFIG_RCU_FANOUT > 16
+#define RCU_FANOUT_LEAF       16
+#else /* #if CONFIG_RCU_FANOUT > 16 */
+#define RCU_FANOUT_LEAF       (CONFIG_RCU_FANOUT)
+#endif /* #else #if CONFIG_RCU_FANOUT > 16 */
+#define RCU_FANOUT_1	      (RCU_FANOUT_LEAF)
+#define RCU_FANOUT_2	      (RCU_FANOUT_1 * CONFIG_RCU_FANOUT)
+#define RCU_FANOUT_3	      (RCU_FANOUT_2 * CONFIG_RCU_FANOUT)
+#define RCU_FANOUT_4	      (RCU_FANOUT_3 * CONFIG_RCU_FANOUT)
+
+#if NR_CPUS <= RCU_FANOUT_1
 #  define NUM_RCU_LVLS	      1
 #  define NUM_RCU_LVL_0	      1
 #  define NUM_RCU_LVL_1	      (NR_CPUS)
 #  define NUM_RCU_LVL_2	      0
 #  define NUM_RCU_LVL_3	      0
 #  define NUM_RCU_LVL_4	      0
-#elif NR_CPUS <= RCU_FANOUT_SQ
+#elif NR_CPUS <= RCU_FANOUT_2
 #  define NUM_RCU_LVLS	      2
 #  define NUM_RCU_LVL_0	      1
-#  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
+#  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
 #  define NUM_RCU_LVL_2	      (NR_CPUS)
 #  define NUM_RCU_LVL_3	      0
 #  define NUM_RCU_LVL_4	      0
-#elif NR_CPUS <= RCU_FANOUT_CUBE
+#elif NR_CPUS <= RCU_FANOUT_3
 #  define NUM_RCU_LVLS	      3
 #  define NUM_RCU_LVL_0	      1
-#  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
-#  define NUM_RCU_LVL_2	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
-#  define NUM_RCU_LVL_3	      NR_CPUS
+#  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
+#  define NUM_RCU_LVL_2	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
+#  define NUM_RCU_LVL_3	      (NR_CPUS)
 #  define NUM_RCU_LVL_4	      0
-#elif NR_CPUS <= RCU_FANOUT_FOURTH
+#elif NR_CPUS <= RCU_FANOUT_4
 #  define NUM_RCU_LVLS	      4
 #  define NUM_RCU_LVL_0	      1
-#  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_CUBE)
-#  define NUM_RCU_LVL_2	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
-#  define NUM_RCU_LVL_3	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
-#  define NUM_RCU_LVL_4	      NR_CPUS
+#  define NUM_RCU_LVL_1	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_3)
+#  define NUM_RCU_LVL_2	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_2)
+#  define NUM_RCU_LVL_3	      DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_1)
+#  define NUM_RCU_LVL_4	      (NR_CPUS)
 #else
 # error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
-#endif /* #if (NR_CPUS) <= RCU_FANOUT */
+#endif /* #if (NR_CPUS) <= RCU_FANOUT_1 */
 
 #define RCU_SUM (NUM_RCU_LVL_0 + NUM_RCU_LVL_1 + NUM_RCU_LVL_2 + NUM_RCU_LVL_3 + NUM_RCU_LVL_4)
 #define NUM_RCU_NODES (RCU_SUM - NR_CPUS)
@@ -203,8 +208,8 @@ struct rcu_data {
 	long		qlen_last_fqs_check;
 					/* qlen at last check for QS forcing */
 	unsigned long	n_cbs_invoked;	/* count of RCU cbs invoked. */
-	unsigned long	n_cbs_orphaned;	/* RCU cbs sent to orphanage. */
-	unsigned long	n_cbs_adopted;	/* RCU cbs adopted from orphanage. */
+	unsigned long   n_cbs_orphaned; /* RCU cbs orphaned by dying CPU */
+	unsigned long   n_cbs_adopted;  /* RCU cbs adopted from dying CPU */
 	unsigned long	n_force_qs_snap;
 					/* did other CPU force QS recently? */
 	long		blimit;		/* Upper limit on a processed batch */
@@ -309,15 +314,7 @@ struct rcu_state {
 	/* End of fields guarded by root rcu_node's lock. */
 
 	raw_spinlock_t onofflock;		/* exclude on/offline and */
-						/*  starting new GP.  Also */
-						/*  protects the following */
-						/*  orphan_cbs fields. */
-	struct rcu_head *orphan_cbs_list;	/* list of rcu_head structs */
-						/*  orphaned by all CPUs in */
-						/*  a given leaf rcu_node */
-						/*  going offline. */
-	struct rcu_head **orphan_cbs_tail;	/* And tail pointer. */
-	long orphan_qlen;			/* Number of orphaned cbs. */
+						/*  starting new GP. */
 	raw_spinlock_t fqslock;			/* Only one task forcing */
 						/*  quiescent states. */
 	unsigned long jiffies_force_qs;		/* Time at which to invoke */
@@ -390,7 +387,7 @@ static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp);
 static int rcu_preempt_pending(int cpu);
 static int rcu_preempt_needs_cpu(int cpu);
 static void __cpuinit rcu_preempt_init_percpu_data(int cpu);
-static void rcu_preempt_send_cbs_to_orphanage(void);
+static void rcu_preempt_send_cbs_to_online(void);
 static void __init __rcu_init_preempt(void);
 static void rcu_needs_cpu_flush(void);
 
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 71a4147473f..a3638710dc6 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -25,6 +25,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/stop_machine.h>
 
 /*
  * Check the RCU kernel configuration parameters and print informative
@@ -773,11 +774,11 @@ static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
 }
 
 /*
- * Move preemptable RCU's callbacks to ->orphan_cbs_list.
+ * Move preemptable RCU's callbacks from dying CPU to other online CPU.
  */
-static void rcu_preempt_send_cbs_to_orphanage(void)
+static void rcu_preempt_send_cbs_to_online(void)
 {
-	rcu_send_cbs_to_orphanage(&rcu_preempt_state);
+	rcu_send_cbs_to_online(&rcu_preempt_state);
 }
 
 /*
@@ -1001,7 +1002,7 @@ static void __cpuinit rcu_preempt_init_percpu_data(int cpu)
 /*
  * Because there is no preemptable RCU, there are no callbacks to move.
  */
-static void rcu_preempt_send_cbs_to_orphanage(void)
+static void rcu_preempt_send_cbs_to_online(void)
 {
 }
 
@@ -1014,6 +1015,132 @@ static void __init __rcu_init_preempt(void)
 
 #endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
 
+#ifndef CONFIG_SMP
+
+void synchronize_sched_expedited(void)
+{
+	cond_resched();
+}
+EXPORT_SYMBOL_GPL(synchronize_sched_expedited);
+
+#else /* #ifndef CONFIG_SMP */
+
+static atomic_t sync_sched_expedited_started = ATOMIC_INIT(0);
+static atomic_t sync_sched_expedited_done = ATOMIC_INIT(0);
+
+static int synchronize_sched_expedited_cpu_stop(void *data)
+{
+	/*
+	 * There must be a full memory barrier on each affected CPU
+	 * between the time that try_stop_cpus() is called and the
+	 * time that it returns.
+	 *
+	 * In the current initial implementation of cpu_stop, the
+	 * above condition is already met when the control reaches
+	 * this point and the following smp_mb() is not strictly
+	 * necessary.  Do smp_mb() anyway for documentation and
+	 * robustness against future implementation changes.
+	 */
+	smp_mb(); /* See above comment block. */
+	return 0;
+}
+
+/*
+ * Wait for an rcu-sched grace period to elapse, but use "big hammer"
+ * approach to force grace period to end quickly.  This consumes
+ * significant time on all CPUs, and is thus not recommended for
+ * any sort of common-case code.
+ *
+ * Note that it is illegal to call this function while holding any
+ * lock that is acquired by a CPU-hotplug notifier.  Failing to
+ * observe this restriction will result in deadlock.
+ *
+ * This implementation can be thought of as an application of ticket
+ * locking to RCU, with sync_sched_expedited_started and
+ * sync_sched_expedited_done taking on the roles of the halves
+ * of the ticket-lock word.  Each task atomically increments
+ * sync_sched_expedited_started upon entry, snapshotting the old value,
+ * then attempts to stop all the CPUs.  If this succeeds, then each
+ * CPU will have executed a context switch, resulting in an RCU-sched
+ * grace period.  We are then done, so we use atomic_cmpxchg() to
+ * update sync_sched_expedited_done to match our snapshot -- but
+ * only if someone else has not already advanced past our snapshot.
+ *
+ * On the other hand, if try_stop_cpus() fails, we check the value
+ * of sync_sched_expedited_done.  If it has advanced past our
+ * initial snapshot, then someone else must have forced a grace period
+ * some time after we took our snapshot.  In this case, our work is
+ * done for us, and we can simply return.  Otherwise, we try again,
+ * but keep our initial snapshot for purposes of checking for someone
+ * doing our work for us.
+ *
+ * If we fail too many times in a row, we fall back to synchronize_sched().
+ */
+void synchronize_sched_expedited(void)
+{
+	int firstsnap, s, snap, trycount = 0;
+
+	/* Note that atomic_inc_return() implies full memory barrier. */
+	firstsnap = snap = atomic_inc_return(&sync_sched_expedited_started);
+	get_online_cpus();
+
+	/*
+	 * Each pass through the following loop attempts to force a
+	 * context switch on each CPU.
+	 */
+	while (try_stop_cpus(cpu_online_mask,
+			     synchronize_sched_expedited_cpu_stop,
+			     NULL) == -EAGAIN) {
+		put_online_cpus();
+
+		/* No joy, try again later.  Or just synchronize_sched(). */
+		if (trycount++ < 10)
+			udelay(trycount * num_online_cpus());
+		else {
+			synchronize_sched();
+			return;
+		}
+
+		/* Check to see if someone else did our work for us. */
+		s = atomic_read(&sync_sched_expedited_done);
+		if (UINT_CMP_GE((unsigned)s, (unsigned)firstsnap)) {
+			smp_mb(); /* ensure test happens before caller kfree */
+			return;
+		}
+
+		/*
+		 * Refetching sync_sched_expedited_started allows later
+		 * callers to piggyback on our grace period.  We subtract
+		 * 1 to get the same token that the last incrementer got.
+		 * We retry after they started, so our grace period works
+		 * for them, and they started after our first try, so their
+		 * grace period works for us.
+		 */
+		get_online_cpus();
+		snap = atomic_read(&sync_sched_expedited_started) - 1;
+		smp_mb(); /* ensure read is before try_stop_cpus(). */
+	}
+
+	/*
+	 * Everyone up to our most recent fetch is covered by our grace
+	 * period.  Update the counter, but only if our work is still
+	 * relevant -- which it won't be if someone who started later
+	 * than we did beat us to the punch.
+	 */
+	do {
+		s = atomic_read(&sync_sched_expedited_done);
+		if (UINT_CMP_GE((unsigned)s, (unsigned)snap)) {
+			smp_mb(); /* ensure test happens before caller kfree */
+			break;
+		}
+	} while (atomic_cmpxchg(&sync_sched_expedited_done, s, snap) != s);
+
+	put_online_cpus();
+}
+EXPORT_SYMBOL_GPL(synchronize_sched_expedited);
+
+#endif /* #else #ifndef CONFIG_SMP */
+
 #if !defined(CONFIG_RCU_FAST_NO_HZ)
 
 /*
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index d15430b9d12..c8e97853b97 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -166,13 +166,13 @@ static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp)
 
 	gpnum = rsp->gpnum;
 	seq_printf(m, "c=%lu g=%lu s=%d jfq=%ld j=%x "
-		      "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu oqlen=%ld\n",
+		      "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu\n",
 		   rsp->completed, gpnum, rsp->signaled,
 		   (long)(rsp->jiffies_force_qs - jiffies),
 		   (int)(jiffies & 0xffff),
 		   rsp->n_force_qs, rsp->n_force_qs_ngp,
 		   rsp->n_force_qs - rsp->n_force_qs_ngp,
-		   rsp->n_force_qs_lh, rsp->orphan_qlen);
+		   rsp->n_force_qs_lh);
 	for (rnp = &rsp->node[0]; rnp - &rsp->node[0] < NUM_RCU_NODES; rnp++) {
 		if (rnp->level != level) {
 			seq_puts(m, "\n");
@@ -300,7 +300,7 @@ static const struct file_operations rcu_pending_fops = {
 
 static struct dentry *rcudir;
 
-static int __init rcuclassic_trace_init(void)
+static int __init rcutree_trace_init(void)
 {
 	struct dentry *retval;
 
@@ -337,14 +337,14 @@ free_out:
 	return 1;
 }
 
-static void __exit rcuclassic_trace_cleanup(void)
+static void __exit rcutree_trace_cleanup(void)
 {
 	debugfs_remove_recursive(rcudir);
 }
 
 
-module_init(rcuclassic_trace_init);
-module_exit(rcuclassic_trace_cleanup);
+module_init(rcutree_trace_init);
+module_exit(rcutree_trace_cleanup);
 
 MODULE_AUTHOR("Paul E. McKenney");
 MODULE_DESCRIPTION("Read-Copy Update tracing for hierarchical implementation");
diff --git a/kernel/resource.c b/kernel/resource.c
index 9fad33efd0d..798e2fae2a0 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -40,23 +40,6 @@ EXPORT_SYMBOL(iomem_resource);
 
 static DEFINE_RWLOCK(resource_lock);
 
-/*
- * By default, we allocate free space bottom-up.  The architecture can request
- * top-down by clearing this flag.  The user can override the architecture's
- * choice with the "resource_alloc_from_bottom" kernel boot option, but that
- * should only be a debugging tool.
- */
-int resource_alloc_from_bottom = 1;
-
-static __init int setup_alloc_from_bottom(char *s)
-{
-	printk(KERN_INFO
-	       "resource: allocating from bottom-up; please report a bug\n");
-	resource_alloc_from_bottom = 1;
-	return 0;
-}
-early_param("resource_alloc_from_bottom", setup_alloc_from_bottom);
-
 static void *r_next(struct seq_file *m, void *v, loff_t *pos)
 {
 	struct resource *p = v;
@@ -374,6 +357,10 @@ int __weak page_is_ram(unsigned long pfn)
 	return walk_system_ram_range(pfn, 1, NULL, __is_ram) == 1;
 }
 
+void __weak arch_remove_reservations(struct resource *avail)
+{
+}
+
 static resource_size_t simple_align_resource(void *data,
 					     const struct resource *avail,
 					     resource_size_t size,
@@ -397,74 +384,7 @@ static bool resource_contains(struct resource *res1, struct resource *res2)
 }
 
 /*
- * Find the resource before "child" in the sibling list of "root" children.
- */
-static struct resource *find_sibling_prev(struct resource *root, struct resource *child)
-{
-	struct resource *this;
-
-	for (this = root->child; this; this = this->sibling)
-		if (this->sibling == child)
-			return this;
-
-	return NULL;
-}
-
-/*
  * Find empty slot in the resource tree given range and alignment.
- * This version allocates from the end of the root resource first.
- */
-static int find_resource_from_top(struct resource *root, struct resource *new,
-				  resource_size_t size, resource_size_t min,
-				  resource_size_t max, resource_size_t align,
-				  resource_size_t (*alignf)(void *,
-						   const struct resource *,
-						   resource_size_t,
-						   resource_size_t),
-				  void *alignf_data)
-{
-	struct resource *this;
-	struct resource tmp, avail, alloc;
-
-	tmp.start = root->end;
-	tmp.end = root->end;
-
-	this = find_sibling_prev(root, NULL);
-	for (;;) {
-		if (this) {
-			if (this->end < root->end)
-				tmp.start = this->end + 1;
-		} else
-			tmp.start = root->start;
-
-		resource_clip(&tmp, min, max);
-
-		/* Check for overflow after ALIGN() */
-		avail = *new;
-		avail.start = ALIGN(tmp.start, align);
-		avail.end = tmp.end;
-		if (avail.start >= tmp.start) {
-			alloc.start = alignf(alignf_data, &avail, size, align);
-			alloc.end = alloc.start + size - 1;
-			if (resource_contains(&avail, &alloc)) {
-				new->start = alloc.start;
-				new->end = alloc.end;
-				return 0;
-			}
-		}
-
-		if (!this || this->start == root->start)
-			break;
-
-		tmp.end = this->start - 1;
-		this = find_sibling_prev(root, this);
-	}
-	return -EBUSY;
-}
-
-/*
- * Find empty slot in the resource tree given range and alignment.
- * This version allocates from the beginning of the root resource first.
  */
 static int find_resource(struct resource *root, struct resource *new,
 			 resource_size_t size, resource_size_t min,
@@ -478,23 +398,24 @@ static int find_resource(struct resource *root, struct resource *new,
 	struct resource *this = root->child;
 	struct resource tmp = *new, avail, alloc;
 
+	tmp.flags = new->flags;
 	tmp.start = root->start;
 	/*
-	 * Skip past an allocated resource that starts at 0, since the
-	 * assignment of this->start - 1 to tmp->end below would cause an
-	 * underflow.
+	 * Skip past an allocated resource that starts at 0, since the assignment
+	 * of this->start - 1 to tmp->end below would cause an underflow.
 	 */
 	if (this && this->start == 0) {
 		tmp.start = this->end + 1;
 		this = this->sibling;
 	}
-	for (;;) {
+	for(;;) {
 		if (this)
 			tmp.end = this->start - 1;
 		else
 			tmp.end = root->end;
 
 		resource_clip(&tmp, min, max);
+		arch_remove_reservations(&tmp);
 
 		/* Check for overflow after ALIGN() */
 		avail = *new;
@@ -509,10 +430,8 @@ static int find_resource(struct resource *root, struct resource *new,
 				return 0;
 			}
 		}
-
 		if (!this)
 			break;
-
 		tmp.start = this->end + 1;
 		this = this->sibling;
 	}
@@ -545,10 +464,7 @@ int allocate_resource(struct resource *root, struct resource *new,
 		alignf = simple_align_resource;
 
 	write_lock(&resource_lock);
-	if (resource_alloc_from_bottom)
-		err = find_resource(root, new, size, min, max, align, alignf, alignf_data);
-	else
-		err = find_resource_from_top(root, new, size, min, max, align, alignf, alignf_data);
+	err = find_resource(root, new, size, min, max, align, alignf, alignf_data);
 	if (err >= 0 && __request_resource(root, new))
 		err = -EBUSY;
 	write_unlock(&resource_lock);
diff --git a/kernel/sched.c b/kernel/sched.c
index aa14a56f9d0..a0eb0941fa8 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -75,9 +75,11 @@
 
 #include <asm/tlb.h>
 #include <asm/irq_regs.h>
+#include <asm/mutex.h>
 
 #include "sched_cpupri.h"
 #include "workqueue_sched.h"
+#include "sched_autogroup.h"
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/sched.h>
@@ -253,6 +255,8 @@ struct task_group {
 	/* runqueue "owned" by this group on each cpu */
 	struct cfs_rq **cfs_rq;
 	unsigned long shares;
+
+	atomic_t load_weight;
 #endif
 
 #ifdef CONFIG_RT_GROUP_SCHED
@@ -268,25 +272,18 @@ struct task_group {
 	struct task_group *parent;
 	struct list_head siblings;
 	struct list_head children;
-};
 
-#define root_task_group init_task_group
+#ifdef CONFIG_SCHED_AUTOGROUP
+	struct autogroup *autogroup;
+#endif
+};
 
-/* task_group_lock serializes add/remove of task groups and also changes to
- * a task group's cpu shares.
- */
+/* task_group_lock serializes the addition/removal of task groups */
 static DEFINE_SPINLOCK(task_group_lock);
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
 
-#ifdef CONFIG_SMP
-static int root_task_group_empty(void)
-{
-	return list_empty(&root_task_group.children);
-}
-#endif
-
-# define INIT_TASK_GROUP_LOAD	NICE_0_LOAD
+# define ROOT_TASK_GROUP_LOAD	NICE_0_LOAD
 
 /*
  * A weight of 0 or 1 can cause arithmetics problems.
@@ -299,13 +296,13 @@ static int root_task_group_empty(void)
 #define MIN_SHARES	2
 #define MAX_SHARES	(1UL << 18)
 
-static int init_task_group_load = INIT_TASK_GROUP_LOAD;
+static int root_task_group_load = ROOT_TASK_GROUP_LOAD;
 #endif
 
 /* Default task group.
  *	Every task in system belong to this group at bootup.
  */
-struct task_group init_task_group;
+struct task_group root_task_group;
 
 #endif	/* CONFIG_CGROUP_SCHED */
 
@@ -342,6 +339,7 @@ struct cfs_rq {
 	 * leaf_cfs_rq_list ties together list of leaf cfs_rq's in a cpu. This
 	 * list is used during load balance.
 	 */
+	int on_list;
 	struct list_head leaf_cfs_rq_list;
 	struct task_group *tg;	/* group that "owns" this runqueue */
 
@@ -360,14 +358,17 @@ struct cfs_rq {
 	unsigned long h_load;
 
 	/*
-	 * this cpu's part of tg->shares
+	 * Maintaining per-cpu shares distribution for group scheduling
+	 *
+	 * load_stamp is the last time we updated the load average
+	 * load_last is the last time we updated the load average and saw load
+	 * load_unacc_exec_time is currently unaccounted execution time
 	 */
-	unsigned long shares;
+	u64 load_avg;
+	u64 load_period;
+	u64 load_stamp, load_last, load_unacc_exec_time;
 
-	/*
-	 * load.weight at the time we set shares
-	 */
-	unsigned long rq_weight;
+	unsigned long load_contribution;
 #endif
 #endif
 };
@@ -560,18 +561,8 @@ struct rq {
 
 static DEFINE_PER_CPU_SHARED_ALIGNED(struct rq, runqueues);
 
-static inline
-void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags)
-{
-	rq->curr->sched_class->check_preempt_curr(rq, p, flags);
 
-	/*
-	 * A queue event has occurred, and we're going to schedule.  In
-	 * this case, we can save a useless back to back clock update.
-	 */
-	if (test_tsk_need_resched(p))
-		rq->skip_clock_update = 1;
-}
+static void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags);
 
 static inline int cpu_of(struct rq *rq)
 {
@@ -615,11 +606,14 @@ static inline int cpu_of(struct rq *rq)
  */
 static inline struct task_group *task_group(struct task_struct *p)
 {
+	struct task_group *tg;
 	struct cgroup_subsys_state *css;
 
 	css = task_subsys_state_check(p, cpu_cgroup_subsys_id,
 			lockdep_is_held(&task_rq(p)->lock));
-	return container_of(css, struct task_group, css);
+	tg = container_of(css, struct task_group, css);
+
+	return autogroup_task_group(p, tg);
 }
 
 /* Change a task's cfs_rq and parent entity if it moves across CPUs/groups */
@@ -646,22 +640,18 @@ static inline struct task_group *task_group(struct task_struct *p)
 
 #endif /* CONFIG_CGROUP_SCHED */
 
-static u64 irq_time_cpu(int cpu);
-static void sched_irq_time_avg_update(struct rq *rq, u64 irq_time);
+static void update_rq_clock_task(struct rq *rq, s64 delta);
 
-inline void update_rq_clock(struct rq *rq)
+static void update_rq_clock(struct rq *rq)
 {
-	if (!rq->skip_clock_update) {
-		int cpu = cpu_of(rq);
-		u64 irq_time;
+	s64 delta;
 
-		rq->clock = sched_clock_cpu(cpu);
-		irq_time = irq_time_cpu(cpu);
-		if (rq->clock - irq_time > rq->clock_task)
-			rq->clock_task = rq->clock - irq_time;
+	if (rq->skip_clock_update)
+		return;
 
-		sched_irq_time_avg_update(rq, irq_time);
-	}
+	delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
+	rq->clock += delta;
+	update_rq_clock_task(rq, delta);
 }
 
 /*
@@ -751,7 +741,7 @@ sched_feat_write(struct file *filp, const char __user *ubuf,
 	buf[cnt] = 0;
 	cmp = strstrip(buf);
 
-	if (strncmp(buf, "NO_", 3) == 0) {
+	if (strncmp(cmp, "NO_", 3) == 0) {
 		neg = 1;
 		cmp += 3;
 	}
@@ -807,20 +797,6 @@ late_initcall(sched_init_debug);
 const_debug unsigned int sysctl_sched_nr_migrate = 32;
 
 /*
- * ratelimit for updating the group shares.
- * default: 0.25ms
- */
-unsigned int sysctl_sched_shares_ratelimit = 250000;
-unsigned int normalized_sysctl_sched_shares_ratelimit = 250000;
-
-/*
- * Inject some fuzzyness into changing the per-cpu group shares
- * this avoids remote rq-locks at the expense of fairness.
- * default: 4
- */
-unsigned int sysctl_sched_shares_thresh = 4;
-
-/*
  * period over which we average the RT time consumption, measured
  * in ms.
  *
@@ -1369,6 +1345,12 @@ static inline void update_load_sub(struct load_weight *lw, unsigned long dec)
 	lw->inv_weight = 0;
 }
 
+static inline void update_load_set(struct load_weight *lw, unsigned long w)
+{
+	lw->weight = w;
+	lw->inv_weight = 0;
+}
+
 /*
  * To aid in avoiding the subversion of "niceness" due to uneven distribution
  * of tasks with abnormal "nice" values across CPUs the contribution that
@@ -1557,101 +1539,6 @@ static unsigned long cpu_avg_load_per_task(int cpu)
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
 
-static __read_mostly unsigned long __percpu *update_shares_data;
-
-static void __set_se_shares(struct sched_entity *se, unsigned long shares);
-
-/*
- * Calculate and set the cpu's group shares.
- */
-static void update_group_shares_cpu(struct task_group *tg, int cpu,
-				    unsigned long sd_shares,
-				    unsigned long sd_rq_weight,
-				    unsigned long *usd_rq_weight)
-{
-	unsigned long shares, rq_weight;
-	int boost = 0;
-
-	rq_weight = usd_rq_weight[cpu];
-	if (!rq_weight) {
-		boost = 1;
-		rq_weight = NICE_0_LOAD;
-	}
-
-	/*
-	 *             \Sum_j shares_j * rq_weight_i
-	 * shares_i =  -----------------------------
-	 *                  \Sum_j rq_weight_j
-	 */
-	shares = (sd_shares * rq_weight) / sd_rq_weight;
-	shares = clamp_t(unsigned long, shares, MIN_SHARES, MAX_SHARES);
-
-	if (abs(shares - tg->se[cpu]->load.weight) >
-			sysctl_sched_shares_thresh) {
-		struct rq *rq = cpu_rq(cpu);
-		unsigned long flags;
-
-		raw_spin_lock_irqsave(&rq->lock, flags);
-		tg->cfs_rq[cpu]->rq_weight = boost ? 0 : rq_weight;
-		tg->cfs_rq[cpu]->shares = boost ? 0 : shares;
-		__set_se_shares(tg->se[cpu], shares);
-		raw_spin_unlock_irqrestore(&rq->lock, flags);
-	}
-}
-
-/*
- * Re-compute the task group their per cpu shares over the given domain.
- * This needs to be done in a bottom-up fashion because the rq weight of a
- * parent group depends on the shares of its child groups.
- */
-static int tg_shares_up(struct task_group *tg, void *data)
-{
-	unsigned long weight, rq_weight = 0, sum_weight = 0, shares = 0;
-	unsigned long *usd_rq_weight;
-	struct sched_domain *sd = data;
-	unsigned long flags;
-	int i;
-
-	if (!tg->se[0])
-		return 0;
-
-	local_irq_save(flags);
-	usd_rq_weight = per_cpu_ptr(update_shares_data, smp_processor_id());
-
-	for_each_cpu(i, sched_domain_span(sd)) {
-		weight = tg->cfs_rq[i]->load.weight;
-		usd_rq_weight[i] = weight;
-
-		rq_weight += weight;
-		/*
-		 * If there are currently no tasks on the cpu pretend there
-		 * is one of average load so that when a new task gets to
-		 * run here it will not get delayed by group starvation.
-		 */
-		if (!weight)
-			weight = NICE_0_LOAD;
-
-		sum_weight += weight;
-		shares += tg->cfs_rq[i]->shares;
-	}
-
-	if (!rq_weight)
-		rq_weight = sum_weight;
-
-	if ((!shares && rq_weight) || shares > tg->shares)
-		shares = tg->shares;
-
-	if (!sd->parent || !(sd->parent->flags & SD_LOAD_BALANCE))
-		shares = tg->shares;
-
-	for_each_cpu(i, sched_domain_span(sd))
-		update_group_shares_cpu(tg, i, shares, rq_weight, usd_rq_weight);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
 /*
  * Compute the cpu's hierarchical load factor for each task group.
  * This needs to be done in a top-down fashion because the load of a child
@@ -1666,7 +1553,7 @@ static int tg_load_down(struct task_group *tg, void *data)
 		load = cpu_rq(cpu)->load.weight;
 	} else {
 		load = tg->parent->cfs_rq[cpu]->h_load;
-		load *= tg->cfs_rq[cpu]->shares;
+		load *= tg->se[cpu]->load.weight;
 		load /= tg->parent->cfs_rq[cpu]->load.weight + 1;
 	}
 
@@ -1675,34 +1562,11 @@ static int tg_load_down(struct task_group *tg, void *data)
 	return 0;
 }
 
-static void update_shares(struct sched_domain *sd)
-{
-	s64 elapsed;
-	u64 now;
-
-	if (root_task_group_empty())
-		return;
-
-	now = local_clock();
-	elapsed = now - sd->last_update;
-
-	if (elapsed >= (s64)(u64)sysctl_sched_shares_ratelimit) {
-		sd->last_update = now;
-		walk_tg_tree(tg_nop, tg_shares_up, sd);
-	}
-}
-
 static void update_h_load(long cpu)
 {
 	walk_tg_tree(tg_load_down, tg_nop, (void *)cpu);
 }
 
-#else
-
-static inline void update_shares(struct sched_domain *sd)
-{
-}
-
 #endif
 
 #ifdef CONFIG_PREEMPT
@@ -1824,15 +1688,6 @@ static void double_rq_unlock(struct rq *rq1, struct rq *rq2)
 
 #endif
 
-#ifdef CONFIG_FAIR_GROUP_SCHED
-static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares)
-{
-#ifdef CONFIG_SMP
-	cfs_rq->shares = shares;
-#endif
-}
-#endif
-
 static void calc_load_account_idle(struct rq *this_rq);
 static void update_sysctl(void);
 static int get_update_sysctl_factor(void);
@@ -1934,10 +1789,9 @@ static void deactivate_task(struct rq *rq, struct task_struct *p, int flags)
  * They are read and saved off onto struct rq in update_rq_clock().
  * This may result in other CPU reading this CPU's irq time and can
  * race with irq/account_system_vtime on this CPU. We would either get old
- * or new value (or semi updated value on 32 bit) with a side effect of
- * accounting a slice of irq time to wrong task when irq is in progress
- * while we read rq->clock. That is a worthy compromise in place of having
- * locks on each irq in account_system_time.
+ * or new value with a side effect of accounting a slice of irq time to wrong
+ * task when irq is in progress while we read rq->clock. That is a worthy
+ * compromise in place of having locks on each irq in account_system_time.
  */
 static DEFINE_PER_CPU(u64, cpu_hardirq_time);
 static DEFINE_PER_CPU(u64, cpu_softirq_time);
@@ -1955,19 +1809,58 @@ void disable_sched_clock_irqtime(void)
 	sched_clock_irqtime = 0;
 }
 
-static u64 irq_time_cpu(int cpu)
+#ifndef CONFIG_64BIT
+static DEFINE_PER_CPU(seqcount_t, irq_time_seq);
+
+static inline void irq_time_write_begin(void)
 {
-	if (!sched_clock_irqtime)
-		return 0;
+	__this_cpu_inc(irq_time_seq.sequence);
+	smp_wmb();
+}
+
+static inline void irq_time_write_end(void)
+{
+	smp_wmb();
+	__this_cpu_inc(irq_time_seq.sequence);
+}
+
+static inline u64 irq_time_read(int cpu)
+{
+	u64 irq_time;
+	unsigned seq;
+
+	do {
+		seq = read_seqcount_begin(&per_cpu(irq_time_seq, cpu));
+		irq_time = per_cpu(cpu_softirq_time, cpu) +
+			   per_cpu(cpu_hardirq_time, cpu);
+	} while (read_seqcount_retry(&per_cpu(irq_time_seq, cpu), seq));
+
+	return irq_time;
+}
+#else /* CONFIG_64BIT */
+static inline void irq_time_write_begin(void)
+{
+}
+
+static inline void irq_time_write_end(void)
+{
+}
 
+static inline u64 irq_time_read(int cpu)
+{
 	return per_cpu(cpu_softirq_time, cpu) + per_cpu(cpu_hardirq_time, cpu);
 }
+#endif /* CONFIG_64BIT */
 
+/*
+ * Called before incrementing preempt_count on {soft,}irq_enter
+ * and before decrementing preempt_count on {soft,}irq_exit.
+ */
 void account_system_vtime(struct task_struct *curr)
 {
 	unsigned long flags;
+	s64 delta;
 	int cpu;
-	u64 now, delta;
 
 	if (!sched_clock_irqtime)
 		return;
@@ -1975,9 +1868,10 @@ void account_system_vtime(struct task_struct *curr)
 	local_irq_save(flags);
 
 	cpu = smp_processor_id();
-	now = sched_clock_cpu(cpu);
-	delta = now - per_cpu(irq_start_time, cpu);
-	per_cpu(irq_start_time, cpu) = now;
+	delta = sched_clock_cpu(cpu) - __this_cpu_read(irq_start_time);
+	__this_cpu_add(irq_start_time, delta);
+
+	irq_time_write_begin();
 	/*
 	 * We do not account for softirq time from ksoftirqd here.
 	 * We want to continue accounting softirq time to ksoftirqd thread
@@ -1985,37 +1879,60 @@ void account_system_vtime(struct task_struct *curr)
 	 * that do not consume any time, but still wants to run.
 	 */
 	if (hardirq_count())
-		per_cpu(cpu_hardirq_time, cpu) += delta;
+		__this_cpu_add(cpu_hardirq_time, delta);
 	else if (in_serving_softirq() && !(curr->flags & PF_KSOFTIRQD))
-		per_cpu(cpu_softirq_time, cpu) += delta;
+		__this_cpu_add(cpu_softirq_time, delta);
 
+	irq_time_write_end();
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL_GPL(account_system_vtime);
 
-static void sched_irq_time_avg_update(struct rq *rq, u64 curr_irq_time)
+static void update_rq_clock_task(struct rq *rq, s64 delta)
 {
-	if (sched_clock_irqtime && sched_feat(NONIRQ_POWER)) {
-		u64 delta_irq = curr_irq_time - rq->prev_irq_time;
-		rq->prev_irq_time = curr_irq_time;
-		sched_rt_avg_update(rq, delta_irq);
-	}
+	s64 irq_delta;
+
+	irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
+
+	/*
+	 * Since irq_time is only updated on {soft,}irq_exit, we might run into
+	 * this case when a previous update_rq_clock() happened inside a
+	 * {soft,}irq region.
+	 *
+	 * When this happens, we stop ->clock_task and only update the
+	 * prev_irq_time stamp to account for the part that fit, so that a next
+	 * update will consume the rest. This ensures ->clock_task is
+	 * monotonic.
+	 *
+	 * It does however cause some slight miss-attribution of {soft,}irq
+	 * time, a more accurate solution would be to update the irq_time using
+	 * the current rq->clock timestamp, except that would require using
+	 * atomic ops.
+	 */
+	if (irq_delta > delta)
+		irq_delta = delta;
+
+	rq->prev_irq_time += irq_delta;
+	delta -= irq_delta;
+	rq->clock_task += delta;
+
+	if (irq_delta && sched_feat(NONIRQ_POWER))
+		sched_rt_avg_update(rq, irq_delta);
 }
 
-#else
+#else /* CONFIG_IRQ_TIME_ACCOUNTING */
 
-static u64 irq_time_cpu(int cpu)
+static void update_rq_clock_task(struct rq *rq, s64 delta)
 {
-	return 0;
+	rq->clock_task += delta;
 }
 
-static void sched_irq_time_avg_update(struct rq *rq, u64 curr_irq_time) { }
-
-#endif
+#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
 
 #include "sched_idletask.c"
 #include "sched_fair.c"
 #include "sched_rt.c"
+#include "sched_autogroup.c"
 #include "sched_stoptask.c"
 #ifdef CONFIG_SCHED_DEBUG
 # include "sched_debug.c"
@@ -2118,6 +2035,31 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p,
 		p->sched_class->prio_changed(rq, p, oldprio, running);
 }
 
+static void check_preempt_curr(struct rq *rq, struct task_struct *p, int flags)
+{
+	const struct sched_class *class;
+
+	if (p->sched_class == rq->curr->sched_class) {
+		rq->curr->sched_class->check_preempt_curr(rq, p, flags);
+	} else {
+		for_each_class(class) {
+			if (class == rq->curr->sched_class)
+				break;
+			if (class == p->sched_class) {
+				resched_task(rq->curr);
+				break;
+			}
+		}
+	}
+
+	/*
+	 * A queue event has occurred, and we're going to schedule.  In
+	 * this case, we can save a useless back to back clock update.
+	 */
+	if (rq->curr->se.on_rq && test_tsk_need_resched(rq->curr))
+		rq->skip_clock_update = 1;
+}
+
 #ifdef CONFIG_SMP
 /*
  * Is this task likely cache-hot:
@@ -2183,10 +2125,8 @@ static int migration_cpu_stop(void *data);
  * The task's runqueue lock must be held.
  * Returns true if you have to wait for migration thread.
  */
-static bool migrate_task(struct task_struct *p, int dest_cpu)
+static bool migrate_task(struct task_struct *p, struct rq *rq)
 {
-	struct rq *rq = task_rq(p);
-
 	/*
 	 * If the task is not on a runqueue (and not running), then
 	 * the next wake-up will properly place the task.
@@ -2366,18 +2306,15 @@ static int select_fallback_rq(int cpu, struct task_struct *p)
 		return dest_cpu;
 
 	/* No more Mr. Nice Guy. */
-	if (unlikely(dest_cpu >= nr_cpu_ids)) {
-		dest_cpu = cpuset_cpus_allowed_fallback(p);
-		/*
-		 * Don't tell them about moving exiting tasks or
-		 * kernel threads (both mm NULL), since they never
-		 * leave kernel.
-		 */
-		if (p->mm && printk_ratelimit()) {
-			printk(KERN_INFO "process %d (%s) no "
-			       "longer affine to cpu%d\n",
-			       task_pid_nr(p), p->comm, cpu);
-		}
+	dest_cpu = cpuset_cpus_allowed_fallback(p);
+	/*
+	 * Don't tell them about moving exiting tasks or
+	 * kernel threads (both mm NULL), since they never
+	 * leave kernel.
+	 */
+	if (p->mm && printk_ratelimit()) {
+		printk(KERN_INFO "process %d (%s) no longer affine to cpu%d\n",
+				task_pid_nr(p), p->comm, cpu);
 	}
 
 	return dest_cpu;
@@ -2713,7 +2650,9 @@ void sched_fork(struct task_struct *p, int clone_flags)
 	/* Want to start with kernel preemption disabled. */
 	task_thread_info(p)->preempt_count = 1;
 #endif
+#ifdef CONFIG_SMP
 	plist_node_init(&p->pushable_tasks, MAX_PRIO);
+#endif
 
 	put_cpu();
 }
@@ -3104,6 +3043,15 @@ static long calc_load_fold_active(struct rq *this_rq)
 	return delta;
 }
 
+static unsigned long
+calc_load(unsigned long load, unsigned long exp, unsigned long active)
+{
+	load *= exp;
+	load += active * (FIXED_1 - exp);
+	load += 1UL << (FSHIFT - 1);
+	return load >> FSHIFT;
+}
+
 #ifdef CONFIG_NO_HZ
 /*
  * For NO_HZ we delay the active fold to the next LOAD_FREQ update.
@@ -3133,6 +3081,128 @@ static long calc_load_fold_idle(void)
 
 	return delta;
 }
+
+/**
+ * fixed_power_int - compute: x^n, in O(log n) time
+ *
+ * @x:         base of the power
+ * @frac_bits: fractional bits of @x
+ * @n:         power to raise @x to.
+ *
+ * By exploiting the relation between the definition of the natural power
+ * function: x^n := x*x*...*x (x multiplied by itself for n times), and
+ * the binary encoding of numbers used by computers: n := \Sum n_i * 2^i,
+ * (where: n_i \elem {0, 1}, the binary vector representing n),
+ * we find: x^n := x^(\Sum n_i * 2^i) := \Prod x^(n_i * 2^i), which is
+ * of course trivially computable in O(log_2 n), the length of our binary
+ * vector.
+ */
+static unsigned long
+fixed_power_int(unsigned long x, unsigned int frac_bits, unsigned int n)
+{
+	unsigned long result = 1UL << frac_bits;
+
+	if (n) for (;;) {
+		if (n & 1) {
+			result *= x;
+			result += 1UL << (frac_bits - 1);
+			result >>= frac_bits;
+		}
+		n >>= 1;
+		if (!n)
+			break;
+		x *= x;
+		x += 1UL << (frac_bits - 1);
+		x >>= frac_bits;
+	}
+
+	return result;
+}
+
+/*
+ * a1 = a0 * e + a * (1 - e)
+ *
+ * a2 = a1 * e + a * (1 - e)
+ *    = (a0 * e + a * (1 - e)) * e + a * (1 - e)
+ *    = a0 * e^2 + a * (1 - e) * (1 + e)
+ *
+ * a3 = a2 * e + a * (1 - e)
+ *    = (a0 * e^2 + a * (1 - e) * (1 + e)) * e + a * (1 - e)
+ *    = a0 * e^3 + a * (1 - e) * (1 + e + e^2)
+ *
+ *  ...
+ *
+ * an = a0 * e^n + a * (1 - e) * (1 + e + ... + e^n-1) [1]
+ *    = a0 * e^n + a * (1 - e) * (1 - e^n)/(1 - e)
+ *    = a0 * e^n + a * (1 - e^n)
+ *
+ * [1] application of the geometric series:
+ *
+ *              n         1 - x^(n+1)
+ *     S_n := \Sum x^i = -------------
+ *             i=0          1 - x
+ */
+static unsigned long
+calc_load_n(unsigned long load, unsigned long exp,
+	    unsigned long active, unsigned int n)
+{
+
+	return calc_load(load, fixed_power_int(exp, FSHIFT, n), active);
+}
+
+/*
+ * NO_HZ can leave us missing all per-cpu ticks calling
+ * calc_load_account_active(), but since an idle CPU folds its delta into
+ * calc_load_tasks_idle per calc_load_account_idle(), all we need to do is fold
+ * in the pending idle delta if our idle period crossed a load cycle boundary.
+ *
+ * Once we've updated the global active value, we need to apply the exponential
+ * weights adjusted to the number of cycles missed.
+ */
+static void calc_global_nohz(unsigned long ticks)
+{
+	long delta, active, n;
+
+	if (time_before(jiffies, calc_load_update))
+		return;
+
+	/*
+	 * If we crossed a calc_load_update boundary, make sure to fold
+	 * any pending idle changes, the respective CPUs might have
+	 * missed the tick driven calc_load_account_active() update
+	 * due to NO_HZ.
+	 */
+	delta = calc_load_fold_idle();
+	if (delta)
+		atomic_long_add(delta, &calc_load_tasks);
+
+	/*
+	 * If we were idle for multiple load cycles, apply them.
+	 */
+	if (ticks >= LOAD_FREQ) {
+		n = ticks / LOAD_FREQ;
+
+		active = atomic_long_read(&calc_load_tasks);
+		active = active > 0 ? active * FIXED_1 : 0;
+
+		avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
+		avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
+		avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
+
+		calc_load_update += n * LOAD_FREQ;
+	}
+
+	/*
+	 * Its possible the remainder of the above division also crosses
+	 * a LOAD_FREQ period, the regular check in calc_global_load()
+	 * which comes after this will take care of that.
+	 *
+	 * Consider us being 11 ticks before a cycle completion, and us
+	 * sleeping for 4*LOAD_FREQ + 22 ticks, then the above code will
+	 * age us 4 cycles, and the test in calc_global_load() will
+	 * pick up the final one.
+	 */
+}
 #else
 static void calc_load_account_idle(struct rq *this_rq)
 {
@@ -3142,6 +3212,10 @@ static inline long calc_load_fold_idle(void)
 {
 	return 0;
 }
+
+static void calc_global_nohz(unsigned long ticks)
+{
+}
 #endif
 
 /**
@@ -3159,24 +3233,17 @@ void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
 	loads[2] = (avenrun[2] + offset) << shift;
 }
 
-static unsigned long
-calc_load(unsigned long load, unsigned long exp, unsigned long active)
-{
-	load *= exp;
-	load += active * (FIXED_1 - exp);
-	return load >> FSHIFT;
-}
-
 /*
  * calc_load - update the avenrun load estimates 10 ticks after the
  * CPUs have updated calc_load_tasks.
  */
-void calc_global_load(void)
+void calc_global_load(unsigned long ticks)
 {
-	unsigned long upd = calc_load_update + 10;
 	long active;
 
-	if (time_before(jiffies, upd))
+	calc_global_nohz(ticks);
+
+	if (time_before(jiffies, calc_load_update + 10))
 		return;
 
 	active = atomic_long_read(&calc_load_tasks);
@@ -3349,7 +3416,7 @@ void sched_exec(void)
 	 * select_task_rq() can race against ->cpus_allowed
 	 */
 	if (cpumask_test_cpu(dest_cpu, &p->cpus_allowed) &&
-	    likely(cpu_active(dest_cpu)) && migrate_task(p, dest_cpu)) {
+	    likely(cpu_active(dest_cpu)) && migrate_task(p, rq)) {
 		struct migration_arg arg = { p, dest_cpu };
 
 		task_rq_unlock(rq, &flags);
@@ -3830,7 +3897,6 @@ static void put_prev_task(struct rq *rq, struct task_struct *prev)
 {
 	if (prev->se.on_rq)
 		update_rq_clock(rq);
-	rq->skip_clock_update = 0;
 	prev->sched_class->put_prev_task(rq, prev);
 }
 
@@ -3888,7 +3954,6 @@ need_resched_nonpreemptible:
 		hrtick_clear(rq);
 
 	raw_spin_lock_irq(&rq->lock);
-	clear_tsk_need_resched(prev);
 
 	switch_count = &prev->nivcsw;
 	if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
@@ -3920,6 +3985,8 @@ need_resched_nonpreemptible:
 
 	put_prev_task(rq, prev);
 	next = pick_next_task(rq);
+	clear_tsk_need_resched(prev);
+	rq->skip_clock_update = 0;
 
 	if (likely(prev != next)) {
 		sched_info_switch(prev, next);
@@ -4014,7 +4081,7 @@ int mutex_spin_on_owner(struct mutex *lock, struct thread_info *owner)
 		if (task_thread_info(rq->curr) != owner || need_resched())
 			return 0;
 
-		cpu_relax();
+		arch_mutex_cpu_relax();
 	}
 
 	return 1;
@@ -4326,7 +4393,7 @@ EXPORT_SYMBOL(wait_for_completion_interruptible);
  * This waits for either a completion of a specific task to be signaled or for a
  * specified timeout to expire. It is interruptible. The timeout is in jiffies.
  */
-unsigned long __sched
+long __sched
 wait_for_completion_interruptible_timeout(struct completion *x,
 					  unsigned long timeout)
 {
@@ -4359,7 +4426,7 @@ EXPORT_SYMBOL(wait_for_completion_killable);
  * signaled or for a specified timeout to expire. It can be
  * interrupted by a kill signal. The timeout is in jiffies.
  */
-unsigned long __sched
+long __sched
 wait_for_completion_killable_timeout(struct completion *x,
 				     unsigned long timeout)
 {
@@ -4701,7 +4768,7 @@ static bool check_same_owner(struct task_struct *p)
 }
 
 static int __sched_setscheduler(struct task_struct *p, int policy,
-				struct sched_param *param, bool user)
+				const struct sched_param *param, bool user)
 {
 	int retval, oldprio, oldpolicy = -1, on_rq, running;
 	unsigned long flags;
@@ -4856,7 +4923,7 @@ recheck:
  * NOTE that the task may be already dead.
  */
 int sched_setscheduler(struct task_struct *p, int policy,
-		       struct sched_param *param)
+		       const struct sched_param *param)
 {
 	return __sched_setscheduler(p, policy, param, true);
 }
@@ -4874,7 +4941,7 @@ EXPORT_SYMBOL_GPL(sched_setscheduler);
  * but our caller might not have that capability.
  */
 int sched_setscheduler_nocheck(struct task_struct *p, int policy,
-			       struct sched_param *param)
+			       const struct sched_param *param)
 {
 	return __sched_setscheduler(p, policy, param, false);
 }
@@ -5390,7 +5457,7 @@ void sched_show_task(struct task_struct *p)
 	unsigned state;
 
 	state = p->state ? __ffs(p->state) + 1 : 0;
-	printk(KERN_INFO "%-13.13s %c", p->comm,
+	printk(KERN_INFO "%-15.15s %c", p->comm,
 		state < sizeof(stat_nam) - 1 ? stat_nam[state] : '?');
 #if BITS_PER_LONG == 32
 	if (state == TASK_RUNNING)
@@ -5554,7 +5621,6 @@ static void update_sysctl(void)
 	SET_SYSCTL(sched_min_granularity);
 	SET_SYSCTL(sched_latency);
 	SET_SYSCTL(sched_wakeup_granularity);
-	SET_SYSCTL(sched_shares_ratelimit);
 #undef SET_SYSCTL
 }
 
@@ -5630,7 +5696,7 @@ again:
 		goto out;
 
 	dest_cpu = cpumask_any_and(cpu_active_mask, new_mask);
-	if (migrate_task(p, dest_cpu)) {
+	if (migrate_task(p, rq)) {
 		struct migration_arg arg = { p, dest_cpu };
 		/* Need help from migration thread: drop lock and wait. */
 		task_rq_unlock(rq, &flags);
@@ -5712,29 +5778,20 @@ static int migration_cpu_stop(void *data)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+
 /*
- * Figure out where task on dead CPU should go, use force if necessary.
+ * Ensures that the idle task is using init_mm right before its cpu goes
+ * offline.
  */
-void move_task_off_dead_cpu(int dead_cpu, struct task_struct *p)
+void idle_task_exit(void)
 {
-	struct rq *rq = cpu_rq(dead_cpu);
-	int needs_cpu, uninitialized_var(dest_cpu);
-	unsigned long flags;
+	struct mm_struct *mm = current->active_mm;
 
-	local_irq_save(flags);
+	BUG_ON(cpu_online(smp_processor_id()));
 
-	raw_spin_lock(&rq->lock);
-	needs_cpu = (task_cpu(p) == dead_cpu) && (p->state != TASK_WAKING);
-	if (needs_cpu)
-		dest_cpu = select_fallback_rq(dead_cpu, p);
-	raw_spin_unlock(&rq->lock);
-	/*
-	 * It can only fail if we race with set_cpus_allowed(),
-	 * in the racer should migrate the task anyway.
-	 */
-	if (needs_cpu)
-		__migrate_task(p, dead_cpu, dest_cpu);
-	local_irq_restore(flags);
+	if (mm != &init_mm)
+		switch_mm(mm, &init_mm, current);
+	mmdrop(mm);
 }
 
 /*
@@ -5747,128 +5804,69 @@ void move_task_off_dead_cpu(int dead_cpu, struct task_struct *p)
 static void migrate_nr_uninterruptible(struct rq *rq_src)
 {
 	struct rq *rq_dest = cpu_rq(cpumask_any(cpu_active_mask));
-	unsigned long flags;
 
-	local_irq_save(flags);
-	double_rq_lock(rq_src, rq_dest);
 	rq_dest->nr_uninterruptible += rq_src->nr_uninterruptible;
 	rq_src->nr_uninterruptible = 0;
-	double_rq_unlock(rq_src, rq_dest);
-	local_irq_restore(flags);
-}
-
-/* Run through task list and migrate tasks from the dead cpu. */
-static void migrate_live_tasks(int src_cpu)
-{
-	struct task_struct *p, *t;
-
-	read_lock(&tasklist_lock);
-
-	do_each_thread(t, p) {
-		if (p == current)
-			continue;
-
-		if (task_cpu(p) == src_cpu)
-			move_task_off_dead_cpu(src_cpu, p);
-	} while_each_thread(t, p);
-
-	read_unlock(&tasklist_lock);
 }
 
 /*
- * Schedules idle task to be the next runnable task on current CPU.
- * It does so by boosting its priority to highest possible.
- * Used by CPU offline code.
+ * remove the tasks which were accounted by rq from calc_load_tasks.
  */
-void sched_idle_next(void)
+static void calc_global_load_remove(struct rq *rq)
 {
-	int this_cpu = smp_processor_id();
-	struct rq *rq = cpu_rq(this_cpu);
-	struct task_struct *p = rq->idle;
-	unsigned long flags;
-
-	/* cpu has to be offline */
-	BUG_ON(cpu_online(this_cpu));
-
-	/*
-	 * Strictly not necessary since rest of the CPUs are stopped by now
-	 * and interrupts disabled on the current cpu.
-	 */
-	raw_spin_lock_irqsave(&rq->lock, flags);
-
-	__setscheduler(rq, p, SCHED_FIFO, MAX_RT_PRIO-1);
-
-	activate_task(rq, p, 0);
-
-	raw_spin_unlock_irqrestore(&rq->lock, flags);
+	atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
+	rq->calc_load_active = 0;
 }
 
 /*
- * Ensures that the idle task is using init_mm right before its cpu goes
- * offline.
+ * Migrate all tasks from the rq, sleeping tasks will be migrated by
+ * try_to_wake_up()->select_task_rq().
+ *
+ * Called with rq->lock held even though we'er in stop_machine() and
+ * there's no concurrency possible, we hold the required locks anyway
+ * because of lock validation efforts.
  */
-void idle_task_exit(void)
-{
-	struct mm_struct *mm = current->active_mm;
-
-	BUG_ON(cpu_online(smp_processor_id()));
-
-	if (mm != &init_mm)
-		switch_mm(mm, &init_mm, current);
-	mmdrop(mm);
-}
-
-/* called under rq->lock with disabled interrupts */
-static void migrate_dead(unsigned int dead_cpu, struct task_struct *p)
+static void migrate_tasks(unsigned int dead_cpu)
 {
 	struct rq *rq = cpu_rq(dead_cpu);
-
-	/* Must be exiting, otherwise would be on tasklist. */
-	BUG_ON(!p->exit_state);
-
-	/* Cannot have done final schedule yet: would have vanished. */
-	BUG_ON(p->state == TASK_DEAD);
-
-	get_task_struct(p);
+	struct task_struct *next, *stop = rq->stop;
+	int dest_cpu;
 
 	/*
-	 * Drop lock around migration; if someone else moves it,
-	 * that's OK. No task can be added to this CPU, so iteration is
-	 * fine.
+	 * Fudge the rq selection such that the below task selection loop
+	 * doesn't get stuck on the currently eligible stop task.
+	 *
+	 * We're currently inside stop_machine() and the rq is either stuck
+	 * in the stop_machine_cpu_stop() loop, or we're executing this code,
+	 * either way we should never end up calling schedule() until we're
+	 * done here.
 	 */
-	raw_spin_unlock_irq(&rq->lock);
-	move_task_off_dead_cpu(dead_cpu, p);
-	raw_spin_lock_irq(&rq->lock);
-
-	put_task_struct(p);
-}
-
-/* release_task() removes task from tasklist, so we won't find dead tasks. */
-static void migrate_dead_tasks(unsigned int dead_cpu)
-{
-	struct rq *rq = cpu_rq(dead_cpu);
-	struct task_struct *next;
+	rq->stop = NULL;
 
 	for ( ; ; ) {
-		if (!rq->nr_running)
+		/*
+		 * There's this thread running, bail when that's the only
+		 * remaining thread.
+		 */
+		if (rq->nr_running == 1)
 			break;
+
 		next = pick_next_task(rq);
-		if (!next)
-			break;
+		BUG_ON(!next);
 		next->sched_class->put_prev_task(rq, next);
-		migrate_dead(dead_cpu, next);
 
+		/* Find suitable destination for @next, with force if needed. */
+		dest_cpu = select_fallback_rq(dead_cpu, next);
+		raw_spin_unlock(&rq->lock);
+
+		__migrate_task(next, dead_cpu, dest_cpu);
+
+		raw_spin_lock(&rq->lock);
 	}
-}
 
-/*
- * remove the tasks which were accounted by rq from calc_load_tasks.
- */
-static void calc_global_load_remove(struct rq *rq)
-{
-	atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
-	rq->calc_load_active = 0;
+	rq->stop = stop;
 }
+
 #endif /* CONFIG_HOTPLUG_CPU */
 
 #if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
@@ -6078,15 +6076,13 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 	unsigned long flags;
 	struct rq *rq = cpu_rq(cpu);
 
-	switch (action) {
+	switch (action & ~CPU_TASKS_FROZEN) {
 
 	case CPU_UP_PREPARE:
-	case CPU_UP_PREPARE_FROZEN:
 		rq->calc_load_update = calc_load_update;
 		break;
 
 	case CPU_ONLINE:
-	case CPU_ONLINE_FROZEN:
 		/* Update our root-domain */
 		raw_spin_lock_irqsave(&rq->lock, flags);
 		if (rq->rd) {
@@ -6098,30 +6094,19 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu)
 		break;
 
 #ifdef CONFIG_HOTPLUG_CPU
-	case CPU_DEAD:
-	case CPU_DEAD_FROZEN:
-		migrate_live_tasks(cpu);
-		/* Idle task back to normal (off runqueue, low prio) */
-		raw_spin_lock_irq(&rq->lock);
-		deactivate_task(rq, rq->idle, 0);
-		__setscheduler(rq, rq->idle, SCHED_NORMAL, 0);
-		rq->idle->sched_class = &idle_sched_class;
-		migrate_dead_tasks(cpu);
-		raw_spin_unlock_irq(&rq->lock);
-		migrate_nr_uninterruptible(rq);
-		BUG_ON(rq->nr_running != 0);
-		calc_global_load_remove(rq);
-		break;
-
 	case CPU_DYING:
-	case CPU_DYING_FROZEN:
 		/* Update our root-domain */
 		raw_spin_lock_irqsave(&rq->lock, flags);
 		if (rq->rd) {
 			BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
 			set_rq_offline(rq);
 		}
+		migrate_tasks(cpu);
+		BUG_ON(rq->nr_running != 1); /* the migration thread */
 		raw_spin_unlock_irqrestore(&rq->lock, flags);
+
+		migrate_nr_uninterruptible(rq);
+		calc_global_load_remove(rq);
 		break;
 #endif
 	}
@@ -6960,6 +6945,8 @@ static void init_sched_groups_power(int cpu, struct sched_domain *sd)
 	if (cpu != group_first_cpu(sd->groups))
 		return;
 
+	sd->groups->group_weight = cpumask_weight(sched_group_cpus(sd->groups));
+
 	child = sd->child;
 
 	sd->groups->cpu_power = 0;
@@ -7850,18 +7837,16 @@ static void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq)
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
 static void init_tg_cfs_entry(struct task_group *tg, struct cfs_rq *cfs_rq,
-				struct sched_entity *se, int cpu, int add,
+				struct sched_entity *se, int cpu,
 				struct sched_entity *parent)
 {
 	struct rq *rq = cpu_rq(cpu);
 	tg->cfs_rq[cpu] = cfs_rq;
 	init_cfs_rq(cfs_rq, rq);
 	cfs_rq->tg = tg;
-	if (add)
-		list_add(&cfs_rq->leaf_cfs_rq_list, &rq->leaf_cfs_rq_list);
 
 	tg->se[cpu] = se;
-	/* se could be NULL for init_task_group */
+	/* se could be NULL for root_task_group */
 	if (!se)
 		return;
 
@@ -7871,15 +7856,14 @@ static void init_tg_cfs_entry(struct task_group *tg, struct cfs_rq *cfs_rq,
 		se->cfs_rq = parent->my_q;
 
 	se->my_q = cfs_rq;
-	se->load.weight = tg->shares;
-	se->load.inv_weight = 0;
+	update_load_set(&se->load, 0);
 	se->parent = parent;
 }
 #endif
 
 #ifdef CONFIG_RT_GROUP_SCHED
 static void init_tg_rt_entry(struct task_group *tg, struct rt_rq *rt_rq,
-		struct sched_rt_entity *rt_se, int cpu, int add,
+		struct sched_rt_entity *rt_se, int cpu,
 		struct sched_rt_entity *parent)
 {
 	struct rq *rq = cpu_rq(cpu);
@@ -7888,8 +7872,6 @@ static void init_tg_rt_entry(struct task_group *tg, struct rt_rq *rt_rq,
 	init_rt_rq(rt_rq, rq);
 	rt_rq->tg = tg;
 	rt_rq->rt_runtime = tg->rt_bandwidth.rt_runtime;
-	if (add)
-		list_add(&rt_rq->leaf_rt_rq_list, &rq->leaf_rt_rq_list);
 
 	tg->rt_se[cpu] = rt_se;
 	if (!rt_se)
@@ -7924,18 +7906,18 @@ void __init sched_init(void)
 		ptr = (unsigned long)kzalloc(alloc_size, GFP_NOWAIT);
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
-		init_task_group.se = (struct sched_entity **)ptr;
+		root_task_group.se = (struct sched_entity **)ptr;
 		ptr += nr_cpu_ids * sizeof(void **);
 
-		init_task_group.cfs_rq = (struct cfs_rq **)ptr;
+		root_task_group.cfs_rq = (struct cfs_rq **)ptr;
 		ptr += nr_cpu_ids * sizeof(void **);
 
 #endif /* CONFIG_FAIR_GROUP_SCHED */
 #ifdef CONFIG_RT_GROUP_SCHED
-		init_task_group.rt_se = (struct sched_rt_entity **)ptr;
+		root_task_group.rt_se = (struct sched_rt_entity **)ptr;
 		ptr += nr_cpu_ids * sizeof(void **);
 
-		init_task_group.rt_rq = (struct rt_rq **)ptr;
+		root_task_group.rt_rq = (struct rt_rq **)ptr;
 		ptr += nr_cpu_ids * sizeof(void **);
 
 #endif /* CONFIG_RT_GROUP_SCHED */
@@ -7955,20 +7937,16 @@ void __init sched_init(void)
 			global_rt_period(), global_rt_runtime());
 
 #ifdef CONFIG_RT_GROUP_SCHED
-	init_rt_bandwidth(&init_task_group.rt_bandwidth,
+	init_rt_bandwidth(&root_task_group.rt_bandwidth,
 			global_rt_period(), global_rt_runtime());
 #endif /* CONFIG_RT_GROUP_SCHED */
 
 #ifdef CONFIG_CGROUP_SCHED
-	list_add(&init_task_group.list, &task_groups);
-	INIT_LIST_HEAD(&init_task_group.children);
-
+	list_add(&root_task_group.list, &task_groups);
+	INIT_LIST_HEAD(&root_task_group.children);
+	autogroup_init(&init_task);
 #endif /* CONFIG_CGROUP_SCHED */
 
-#if defined CONFIG_FAIR_GROUP_SCHED && defined CONFIG_SMP
-	update_shares_data = __alloc_percpu(nr_cpu_ids * sizeof(unsigned long),
-					    __alignof__(unsigned long));
-#endif
 	for_each_possible_cpu(i) {
 		struct rq *rq;
 
@@ -7980,38 +7958,34 @@ void __init sched_init(void)
 		init_cfs_rq(&rq->cfs, rq);
 		init_rt_rq(&rq->rt, rq);
 #ifdef CONFIG_FAIR_GROUP_SCHED
-		init_task_group.shares = init_task_group_load;
+		root_task_group.shares = root_task_group_load;
 		INIT_LIST_HEAD(&rq->leaf_cfs_rq_list);
-#ifdef CONFIG_CGROUP_SCHED
 		/*
-		 * How much cpu bandwidth does init_task_group get?
+		 * How much cpu bandwidth does root_task_group get?
 		 *
 		 * In case of task-groups formed thr' the cgroup filesystem, it
 		 * gets 100% of the cpu resources in the system. This overall
 		 * system cpu resource is divided among the tasks of
-		 * init_task_group and its child task-groups in a fair manner,
+		 * root_task_group and its child task-groups in a fair manner,
 		 * based on each entity's (task or task-group's) weight
 		 * (se->load.weight).
 		 *
-		 * In other words, if init_task_group has 10 tasks of weight
+		 * In other words, if root_task_group has 10 tasks of weight
 		 * 1024) and two child groups A0 and A1 (of weight 1024 each),
 		 * then A0's share of the cpu resource is:
 		 *
 		 *	A0's bandwidth = 1024 / (10*1024 + 1024 + 1024) = 8.33%
 		 *
-		 * We achieve this by letting init_task_group's tasks sit
-		 * directly in rq->cfs (i.e init_task_group->se[] = NULL).
+		 * We achieve this by letting root_task_group's tasks sit
+		 * directly in rq->cfs (i.e root_task_group->se[] = NULL).
 		 */
-		init_tg_cfs_entry(&init_task_group, &rq->cfs, NULL, i, 1, NULL);
-#endif
+		init_tg_cfs_entry(&root_task_group, &rq->cfs, NULL, i, NULL);
 #endif /* CONFIG_FAIR_GROUP_SCHED */
 
 		rq->rt.rt_runtime = def_rt_bandwidth.rt_runtime;
 #ifdef CONFIG_RT_GROUP_SCHED
 		INIT_LIST_HEAD(&rq->leaf_rt_rq_list);
-#ifdef CONFIG_CGROUP_SCHED
-		init_tg_rt_entry(&init_task_group, &rq->rt, NULL, i, 1, NULL);
-#endif
+		init_tg_rt_entry(&root_task_group, &rq->rt, NULL, i, NULL);
 #endif
 
 		for (j = 0; j < CPU_LOAD_IDX_MAX; j++)
@@ -8091,8 +8065,6 @@ void __init sched_init(void)
 		zalloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
 #endif /* SMP */
 
-	perf_event_init();
-
 	scheduler_running = 1;
 }
 
@@ -8286,7 +8258,7 @@ int alloc_fair_sched_group(struct task_group *tg, struct task_group *parent)
 		if (!se)
 			goto err_free_rq;
 
-		init_tg_cfs_entry(tg, cfs_rq, se, i, 0, parent->se[i]);
+		init_tg_cfs_entry(tg, cfs_rq, se, i, parent->se[i]);
 	}
 
 	return 1;
@@ -8297,15 +8269,21 @@ err:
 	return 0;
 }
 
-static inline void register_fair_sched_group(struct task_group *tg, int cpu)
-{
-	list_add_rcu(&tg->cfs_rq[cpu]->leaf_cfs_rq_list,
-			&cpu_rq(cpu)->leaf_cfs_rq_list);
-}
-
 static inline void unregister_fair_sched_group(struct task_group *tg, int cpu)
 {
-	list_del_rcu(&tg->cfs_rq[cpu]->leaf_cfs_rq_list);
+	struct rq *rq = cpu_rq(cpu);
+	unsigned long flags;
+
+	/*
+	* Only empty task groups can be destroyed; so we can speculatively
+	* check on_list without danger of it being re-added.
+	*/
+	if (!tg->cfs_rq[cpu]->on_list)
+		return;
+
+	raw_spin_lock_irqsave(&rq->lock, flags);
+	list_del_leaf_cfs_rq(tg->cfs_rq[cpu]);
+	raw_spin_unlock_irqrestore(&rq->lock, flags);
 }
 #else /* !CONFG_FAIR_GROUP_SCHED */
 static inline void free_fair_sched_group(struct task_group *tg)
@@ -8318,10 +8296,6 @@ int alloc_fair_sched_group(struct task_group *tg, struct task_group *parent)
 	return 1;
 }
 
-static inline void register_fair_sched_group(struct task_group *tg, int cpu)
-{
-}
-
 static inline void unregister_fair_sched_group(struct task_group *tg, int cpu)
 {
 }
@@ -8376,7 +8350,7 @@ int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent)
 		if (!rt_se)
 			goto err_free_rq;
 
-		init_tg_rt_entry(tg, rt_rq, rt_se, i, 0, parent->rt_se[i]);
+		init_tg_rt_entry(tg, rt_rq, rt_se, i, parent->rt_se[i]);
 	}
 
 	return 1;
@@ -8386,17 +8360,6 @@ err_free_rq:
 err:
 	return 0;
 }
-
-static inline void register_rt_sched_group(struct task_group *tg, int cpu)
-{
-	list_add_rcu(&tg->rt_rq[cpu]->leaf_rt_rq_list,
-			&cpu_rq(cpu)->leaf_rt_rq_list);
-}
-
-static inline void unregister_rt_sched_group(struct task_group *tg, int cpu)
-{
-	list_del_rcu(&tg->rt_rq[cpu]->leaf_rt_rq_list);
-}
 #else /* !CONFIG_RT_GROUP_SCHED */
 static inline void free_rt_sched_group(struct task_group *tg)
 {
@@ -8407,14 +8370,6 @@ int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent)
 {
 	return 1;
 }
-
-static inline void register_rt_sched_group(struct task_group *tg, int cpu)
-{
-}
-
-static inline void unregister_rt_sched_group(struct task_group *tg, int cpu)
-{
-}
 #endif /* CONFIG_RT_GROUP_SCHED */
 
 #ifdef CONFIG_CGROUP_SCHED
@@ -8422,6 +8377,7 @@ static void free_sched_group(struct task_group *tg)
 {
 	free_fair_sched_group(tg);
 	free_rt_sched_group(tg);
+	autogroup_free(tg);
 	kfree(tg);
 }
 
@@ -8430,7 +8386,6 @@ struct task_group *sched_create_group(struct task_group *parent)
 {
 	struct task_group *tg;
 	unsigned long flags;
-	int i;
 
 	tg = kzalloc(sizeof(*tg), GFP_KERNEL);
 	if (!tg)
@@ -8443,10 +8398,6 @@ struct task_group *sched_create_group(struct task_group *parent)
 		goto err;
 
 	spin_lock_irqsave(&task_group_lock, flags);
-	for_each_possible_cpu(i) {
-		register_fair_sched_group(tg, i);
-		register_rt_sched_group(tg, i);
-	}
 	list_add_rcu(&tg->list, &task_groups);
 
 	WARN_ON(!parent); /* root should already exist */
@@ -8476,11 +8427,11 @@ void sched_destroy_group(struct task_group *tg)
 	unsigned long flags;
 	int i;
 
-	spin_lock_irqsave(&task_group_lock, flags);
-	for_each_possible_cpu(i) {
+	/* end participation in shares distribution */
+	for_each_possible_cpu(i)
 		unregister_fair_sched_group(tg, i);
-		unregister_rt_sched_group(tg, i);
-	}
+
+	spin_lock_irqsave(&task_group_lock, flags);
 	list_del_rcu(&tg->list);
 	list_del_rcu(&tg->siblings);
 	spin_unlock_irqrestore(&task_group_lock, flags);
@@ -8527,33 +8478,6 @@ void sched_move_task(struct task_struct *tsk)
 #endif /* CONFIG_CGROUP_SCHED */
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
-static void __set_se_shares(struct sched_entity *se, unsigned long shares)
-{
-	struct cfs_rq *cfs_rq = se->cfs_rq;
-	int on_rq;
-
-	on_rq = se->on_rq;
-	if (on_rq)
-		dequeue_entity(cfs_rq, se, 0);
-
-	se->load.weight = shares;
-	se->load.inv_weight = 0;
-
-	if (on_rq)
-		enqueue_entity(cfs_rq, se, 0);
-}
-
-static void set_se_shares(struct sched_entity *se, unsigned long shares)
-{
-	struct cfs_rq *cfs_rq = se->cfs_rq;
-	struct rq *rq = cfs_rq->rq;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&rq->lock, flags);
-	__set_se_shares(se, shares);
-	raw_spin_unlock_irqrestore(&rq->lock, flags);
-}
-
 static DEFINE_MUTEX(shares_mutex);
 
 int sched_group_set_shares(struct task_group *tg, unsigned long shares)
@@ -8576,37 +8500,19 @@ int sched_group_set_shares(struct task_group *tg, unsigned long shares)
 	if (tg->shares == shares)
 		goto done;
 
-	spin_lock_irqsave(&task_group_lock, flags);
-	for_each_possible_cpu(i)
-		unregister_fair_sched_group(tg, i);
-	list_del_rcu(&tg->siblings);
-	spin_unlock_irqrestore(&task_group_lock, flags);
-
-	/* wait for any ongoing reference to this group to finish */
-	synchronize_sched();
-
-	/*
-	 * Now we are free to modify the group's share on each cpu
-	 * w/o tripping rebalance_share or load_balance_fair.
-	 */
 	tg->shares = shares;
 	for_each_possible_cpu(i) {
-		/*
-		 * force a rebalance
-		 */
-		cfs_rq_set_shares(tg->cfs_rq[i], 0);
-		set_se_shares(tg->se[i], shares);
+		struct rq *rq = cpu_rq(i);
+		struct sched_entity *se;
+
+		se = tg->se[i];
+		/* Propagate contribution to hierarchy */
+		raw_spin_lock_irqsave(&rq->lock, flags);
+		for_each_sched_entity(se)
+			update_cfs_shares(group_cfs_rq(se), 0);
+		raw_spin_unlock_irqrestore(&rq->lock, flags);
 	}
 
-	/*
-	 * Enable load balance activity on this group, by inserting it back on
-	 * each cpu's rq->leaf_cfs_rq_list.
-	 */
-	spin_lock_irqsave(&task_group_lock, flags);
-	for_each_possible_cpu(i)
-		register_fair_sched_group(tg, i);
-	list_add_rcu(&tg->siblings, &tg->parent->children);
-	spin_unlock_irqrestore(&task_group_lock, flags);
 done:
 	mutex_unlock(&shares_mutex);
 	return 0;
@@ -8905,7 +8811,7 @@ cpu_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cgrp)
 
 	if (!cgrp->parent) {
 		/* This is early initialization for the top cgroup */
-		return &init_task_group.css;
+		return &root_task_group.css;
 	}
 
 	parent = cgroup_tg(cgrp->parent);
@@ -9332,72 +9238,3 @@ struct cgroup_subsys cpuacct_subsys = {
 };
 #endif	/* CONFIG_CGROUP_CPUACCT */
 
-#ifndef CONFIG_SMP
-
-void synchronize_sched_expedited(void)
-{
-	barrier();
-}
-EXPORT_SYMBOL_GPL(synchronize_sched_expedited);
-
-#else /* #ifndef CONFIG_SMP */
-
-static atomic_t synchronize_sched_expedited_count = ATOMIC_INIT(0);
-
-static int synchronize_sched_expedited_cpu_stop(void *data)
-{
-	/*
-	 * There must be a full memory barrier on each affected CPU
-	 * between the time that try_stop_cpus() is called and the
-	 * time that it returns.
-	 *
-	 * In the current initial implementation of cpu_stop, the
-	 * above condition is already met when the control reaches
-	 * this point and the following smp_mb() is not strictly
-	 * necessary.  Do smp_mb() anyway for documentation and
-	 * robustness against future implementation changes.
-	 */
-	smp_mb(); /* See above comment block. */
-	return 0;
-}
-
-/*
- * Wait for an rcu-sched grace period to elapse, but use "big hammer"
- * approach to force grace period to end quickly.  This consumes
- * significant time on all CPUs, and is thus not recommended for
- * any sort of common-case code.
- *
- * Note that it is illegal to call this function while holding any
- * lock that is acquired by a CPU-hotplug notifier.  Failing to
- * observe this restriction will result in deadlock.
- */
-void synchronize_sched_expedited(void)
-{
-	int snap, trycount = 0;
-
-	smp_mb();  /* ensure prior mod happens before capturing snap. */
-	snap = atomic_read(&synchronize_sched_expedited_count) + 1;
-	get_online_cpus();
-	while (try_stop_cpus(cpu_online_mask,
-			     synchronize_sched_expedited_cpu_stop,
-			     NULL) == -EAGAIN) {
-		put_online_cpus();
-		if (trycount++ < 10)
-			udelay(trycount * num_online_cpus());
-		else {
-			synchronize_sched();
-			return;
-		}
-		if (atomic_read(&synchronize_sched_expedited_count) - snap > 0) {
-			smp_mb(); /* ensure test happens before caller kfree */
-			return;
-		}
-		get_online_cpus();
-	}
-	atomic_inc(&synchronize_sched_expedited_count);
-	smp_mb__after_atomic_inc(); /* ensure post-GP actions seen after GP. */
-	put_online_cpus();
-}
-EXPORT_SYMBOL_GPL(synchronize_sched_expedited);
-
-#endif /* #else #ifndef CONFIG_SMP */
diff --git a/kernel/sched_autogroup.c b/kernel/sched_autogroup.c
new file mode 100644
index 00000000000..32a723b8f84
--- /dev/null
+++ b/kernel/sched_autogroup.c
@@ -0,0 +1,238 @@
+#ifdef CONFIG_SCHED_AUTOGROUP
+
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/kallsyms.h>
+#include <linux/utsname.h>
+
+unsigned int __read_mostly sysctl_sched_autogroup_enabled = 1;
+static struct autogroup autogroup_default;
+static atomic_t autogroup_seq_nr;
+
+static void __init autogroup_init(struct task_struct *init_task)
+{
+	autogroup_default.tg = &root_task_group;
+	root_task_group.autogroup = &autogroup_default;
+	kref_init(&autogroup_default.kref);
+	init_rwsem(&autogroup_default.lock);
+	init_task->signal->autogroup = &autogroup_default;
+}
+
+static inline void autogroup_free(struct task_group *tg)
+{
+	kfree(tg->autogroup);
+}
+
+static inline void autogroup_destroy(struct kref *kref)
+{
+	struct autogroup *ag = container_of(kref, struct autogroup, kref);
+
+	sched_destroy_group(ag->tg);
+}
+
+static inline void autogroup_kref_put(struct autogroup *ag)
+{
+	kref_put(&ag->kref, autogroup_destroy);
+}
+
+static inline struct autogroup *autogroup_kref_get(struct autogroup *ag)
+{
+	kref_get(&ag->kref);
+	return ag;
+}
+
+static inline struct autogroup *autogroup_task_get(struct task_struct *p)
+{
+	struct autogroup *ag;
+	unsigned long flags;
+
+	if (!lock_task_sighand(p, &flags))
+		return autogroup_kref_get(&autogroup_default);
+
+	ag = autogroup_kref_get(p->signal->autogroup);
+	unlock_task_sighand(p, &flags);
+
+	return ag;
+}
+
+static inline struct autogroup *autogroup_create(void)
+{
+	struct autogroup *ag = kzalloc(sizeof(*ag), GFP_KERNEL);
+	struct task_group *tg;
+
+	if (!ag)
+		goto out_fail;
+
+	tg = sched_create_group(&root_task_group);
+
+	if (IS_ERR(tg))
+		goto out_free;
+
+	kref_init(&ag->kref);
+	init_rwsem(&ag->lock);
+	ag->id = atomic_inc_return(&autogroup_seq_nr);
+	ag->tg = tg;
+	tg->autogroup = ag;
+
+	return ag;
+
+out_free:
+	kfree(ag);
+out_fail:
+	if (printk_ratelimit()) {
+		printk(KERN_WARNING "autogroup_create: %s failure.\n",
+			ag ? "sched_create_group()" : "kmalloc()");
+	}
+
+	return autogroup_kref_get(&autogroup_default);
+}
+
+static inline bool
+task_wants_autogroup(struct task_struct *p, struct task_group *tg)
+{
+	if (tg != &root_task_group)
+		return false;
+
+	if (p->sched_class != &fair_sched_class)
+		return false;
+
+	/*
+	 * We can only assume the task group can't go away on us if
+	 * autogroup_move_group() can see us on ->thread_group list.
+	 */
+	if (p->flags & PF_EXITING)
+		return false;
+
+	return true;
+}
+
+static inline struct task_group *
+autogroup_task_group(struct task_struct *p, struct task_group *tg)
+{
+	int enabled = ACCESS_ONCE(sysctl_sched_autogroup_enabled);
+
+	if (enabled && task_wants_autogroup(p, tg))
+		return p->signal->autogroup->tg;
+
+	return tg;
+}
+
+static void
+autogroup_move_group(struct task_struct *p, struct autogroup *ag)
+{
+	struct autogroup *prev;
+	struct task_struct *t;
+	unsigned long flags;
+
+	BUG_ON(!lock_task_sighand(p, &flags));
+
+	prev = p->signal->autogroup;
+	if (prev == ag) {
+		unlock_task_sighand(p, &flags);
+		return;
+	}
+
+	p->signal->autogroup = autogroup_kref_get(ag);
+
+	t = p;
+	do {
+		sched_move_task(t);
+	} while_each_thread(p, t);
+
+	unlock_task_sighand(p, &flags);
+	autogroup_kref_put(prev);
+}
+
+/* Allocates GFP_KERNEL, cannot be called under any spinlock */
+void sched_autogroup_create_attach(struct task_struct *p)
+{
+	struct autogroup *ag = autogroup_create();
+
+	autogroup_move_group(p, ag);
+	/* drop extra refrence added by autogroup_create() */
+	autogroup_kref_put(ag);
+}
+EXPORT_SYMBOL(sched_autogroup_create_attach);
+
+/* Cannot be called under siglock.  Currently has no users */
+void sched_autogroup_detach(struct task_struct *p)
+{
+	autogroup_move_group(p, &autogroup_default);
+}
+EXPORT_SYMBOL(sched_autogroup_detach);
+
+void sched_autogroup_fork(struct signal_struct *sig)
+{
+	sig->autogroup = autogroup_task_get(current);
+}
+
+void sched_autogroup_exit(struct signal_struct *sig)
+{
+	autogroup_kref_put(sig->autogroup);
+}
+
+static int __init setup_autogroup(char *str)
+{
+	sysctl_sched_autogroup_enabled = 0;
+
+	return 1;
+}
+
+__setup("noautogroup", setup_autogroup);
+
+#ifdef CONFIG_PROC_FS
+
+int proc_sched_autogroup_set_nice(struct task_struct *p, int *nice)
+{
+	static unsigned long next = INITIAL_JIFFIES;
+	struct autogroup *ag;
+	int err;
+
+	if (*nice < -20 || *nice > 19)
+		return -EINVAL;
+
+	err = security_task_setnice(current, *nice);
+	if (err)
+		return err;
+
+	if (*nice < 0 && !can_nice(current, *nice))
+		return -EPERM;
+
+	/* this is a heavy operation taking global locks.. */
+	if (!capable(CAP_SYS_ADMIN) && time_before(jiffies, next))
+		return -EAGAIN;
+
+	next = HZ / 10 + jiffies;
+	ag = autogroup_task_get(p);
+
+	down_write(&ag->lock);
+	err = sched_group_set_shares(ag->tg, prio_to_weight[*nice + 20]);
+	if (!err)
+		ag->nice = *nice;
+	up_write(&ag->lock);
+
+	autogroup_kref_put(ag);
+
+	return err;
+}
+
+void proc_sched_autogroup_show_task(struct task_struct *p, struct seq_file *m)
+{
+	struct autogroup *ag = autogroup_task_get(p);
+
+	down_read(&ag->lock);
+	seq_printf(m, "/autogroup-%ld nice %d\n", ag->id, ag->nice);
+	up_read(&ag->lock);
+
+	autogroup_kref_put(ag);
+}
+#endif /* CONFIG_PROC_FS */
+
+#ifdef CONFIG_SCHED_DEBUG
+static inline int autogroup_path(struct task_group *tg, char *buf, int buflen)
+{
+	return snprintf(buf, buflen, "%s-%ld", "/autogroup", tg->autogroup->id);
+}
+#endif /* CONFIG_SCHED_DEBUG */
+
+#endif /* CONFIG_SCHED_AUTOGROUP */
diff --git a/kernel/sched_autogroup.h b/kernel/sched_autogroup.h
new file mode 100644
index 00000000000..5358e241cb2
--- /dev/null
+++ b/kernel/sched_autogroup.h
@@ -0,0 +1,32 @@
+#ifdef CONFIG_SCHED_AUTOGROUP
+
+struct autogroup {
+	struct kref		kref;
+	struct task_group	*tg;
+	struct rw_semaphore	lock;
+	unsigned long		id;
+	int			nice;
+};
+
+static inline struct task_group *
+autogroup_task_group(struct task_struct *p, struct task_group *tg);
+
+#else /* !CONFIG_SCHED_AUTOGROUP */
+
+static inline void autogroup_init(struct task_struct *init_task) {  }
+static inline void autogroup_free(struct task_group *tg) { }
+
+static inline struct task_group *
+autogroup_task_group(struct task_struct *p, struct task_group *tg)
+{
+	return tg;
+}
+
+#ifdef CONFIG_SCHED_DEBUG
+static inline int autogroup_path(struct task_group *tg, char *buf, int buflen)
+{
+	return 0;
+}
+#endif
+
+#endif /* CONFIG_SCHED_AUTOGROUP */
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 52f1a149bfb..9d8af0b3fb6 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -79,7 +79,7 @@ unsigned long long __attribute__((weak)) sched_clock(void)
 }
 EXPORT_SYMBOL_GPL(sched_clock);
 
-static __read_mostly int sched_clock_running;
+__read_mostly int sched_clock_running;
 
 #ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
 __read_mostly int sched_clock_stable;
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 2e1b0d17dd9..1dfae3d014b 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -54,8 +54,7 @@ static unsigned long nsec_low(unsigned long long nsec)
 #define SPLIT_NS(x) nsec_high(x), nsec_low(x)
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
-static void print_cfs_group_stats(struct seq_file *m, int cpu,
-		struct task_group *tg)
+static void print_cfs_group_stats(struct seq_file *m, int cpu, struct task_group *tg)
 {
 	struct sched_entity *se = tg->se[cpu];
 	if (!se)
@@ -110,16 +109,6 @@ print_task(struct seq_file *m, struct rq *rq, struct task_struct *p)
 		0LL, 0LL, 0LL, 0L, 0LL, 0L, 0LL, 0L);
 #endif
 
-#ifdef CONFIG_CGROUP_SCHED
-	{
-		char path[64];
-
-		rcu_read_lock();
-		cgroup_path(task_group(p)->css.cgroup, path, sizeof(path));
-		rcu_read_unlock();
-		SEQ_printf(m, " %s", path);
-	}
-#endif
 	SEQ_printf(m, "\n");
 }
 
@@ -147,19 +136,6 @@ static void print_rq(struct seq_file *m, struct rq *rq, int rq_cpu)
 	read_unlock_irqrestore(&tasklist_lock, flags);
 }
 
-#if defined(CONFIG_CGROUP_SCHED) && \
-	(defined(CONFIG_FAIR_GROUP_SCHED) || defined(CONFIG_RT_GROUP_SCHED))
-static void task_group_path(struct task_group *tg, char *buf, int buflen)
-{
-	/* may be NULL if the underlying cgroup isn't fully-created yet */
-	if (!tg->css.cgroup) {
-		buf[0] = '\0';
-		return;
-	}
-	cgroup_path(tg->css.cgroup, buf, buflen);
-}
-#endif
-
 void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
 {
 	s64 MIN_vruntime = -1, min_vruntime, max_vruntime = -1,
@@ -168,16 +144,7 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
 	struct sched_entity *last;
 	unsigned long flags;
 
-#if defined(CONFIG_CGROUP_SCHED) && defined(CONFIG_FAIR_GROUP_SCHED)
-	char path[128];
-	struct task_group *tg = cfs_rq->tg;
-
-	task_group_path(tg, path, sizeof(path));
-
-	SEQ_printf(m, "\ncfs_rq[%d]:%s\n", cpu, path);
-#else
 	SEQ_printf(m, "\ncfs_rq[%d]:\n", cpu);
-#endif
 	SEQ_printf(m, "  .%-30s: %Ld.%06ld\n", "exec_clock",
 			SPLIT_NS(cfs_rq->exec_clock));
 
@@ -202,32 +169,29 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
 	spread0 = min_vruntime - rq0_min_vruntime;
 	SEQ_printf(m, "  .%-30s: %Ld.%06ld\n", "spread0",
 			SPLIT_NS(spread0));
-	SEQ_printf(m, "  .%-30s: %ld\n", "nr_running", cfs_rq->nr_running);
-	SEQ_printf(m, "  .%-30s: %ld\n", "load", cfs_rq->load.weight);
-
 	SEQ_printf(m, "  .%-30s: %d\n", "nr_spread_over",
 			cfs_rq->nr_spread_over);
+	SEQ_printf(m, "  .%-30s: %ld\n", "nr_running", cfs_rq->nr_running);
+	SEQ_printf(m, "  .%-30s: %ld\n", "load", cfs_rq->load.weight);
 #ifdef CONFIG_FAIR_GROUP_SCHED
 #ifdef CONFIG_SMP
-	SEQ_printf(m, "  .%-30s: %lu\n", "shares", cfs_rq->shares);
+	SEQ_printf(m, "  .%-30s: %Ld.%06ld\n", "load_avg",
+			SPLIT_NS(cfs_rq->load_avg));
+	SEQ_printf(m, "  .%-30s: %Ld.%06ld\n", "load_period",
+			SPLIT_NS(cfs_rq->load_period));
+	SEQ_printf(m, "  .%-30s: %ld\n", "load_contrib",
+			cfs_rq->load_contribution);
+	SEQ_printf(m, "  .%-30s: %d\n", "load_tg",
+			atomic_read(&cfs_rq->tg->load_weight));
 #endif
+
 	print_cfs_group_stats(m, cpu, cfs_rq->tg);
 #endif
 }
 
 void print_rt_rq(struct seq_file *m, int cpu, struct rt_rq *rt_rq)
 {
-#if defined(CONFIG_CGROUP_SCHED) && defined(CONFIG_RT_GROUP_SCHED)
-	char path[128];
-	struct task_group *tg = rt_rq->tg;
-
-	task_group_path(tg, path, sizeof(path));
-
-	SEQ_printf(m, "\nrt_rq[%d]:%s\n", cpu, path);
-#else
 	SEQ_printf(m, "\nrt_rq[%d]:\n", cpu);
-#endif
-
 
 #define P(x) \
 	SEQ_printf(m, "  .%-30s: %Ld\n", #x, (long long)(rt_rq->x))
@@ -243,6 +207,8 @@ void print_rt_rq(struct seq_file *m, int cpu, struct rt_rq *rt_rq)
 #undef P
 }
 
+extern __read_mostly int sched_clock_running;
+
 static void print_cpu(struct seq_file *m, int cpu)
 {
 	struct rq *rq = cpu_rq(cpu);
@@ -314,21 +280,42 @@ static const char *sched_tunable_scaling_names[] = {
 
 static int sched_debug_show(struct seq_file *m, void *v)
 {
-	u64 now = ktime_to_ns(ktime_get());
+	u64 ktime, sched_clk, cpu_clk;
+	unsigned long flags;
 	int cpu;
 
-	SEQ_printf(m, "Sched Debug Version: v0.09, %s %.*s\n",
+	local_irq_save(flags);
+	ktime = ktime_to_ns(ktime_get());
+	sched_clk = sched_clock();
+	cpu_clk = local_clock();
+	local_irq_restore(flags);
+
+	SEQ_printf(m, "Sched Debug Version: v0.10, %s %.*s\n",
 		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
 
-	SEQ_printf(m, "now at %Lu.%06ld msecs\n", SPLIT_NS(now));
+#define P(x) \
+	SEQ_printf(m, "%-40s: %Ld\n", #x, (long long)(x))
+#define PN(x) \
+	SEQ_printf(m, "%-40s: %Ld.%06ld\n", #x, SPLIT_NS(x))
+	PN(ktime);
+	PN(sched_clk);
+	PN(cpu_clk);
+	P(jiffies);
+#ifdef CONFIG_HAVE_UNSTABLE_SCHED_CLOCK
+	P(sched_clock_stable);
+#endif
+#undef PN
+#undef P
+
+	SEQ_printf(m, "\n");
+	SEQ_printf(m, "sysctl_sched\n");
 
 #define P(x) \
 	SEQ_printf(m, "  .%-40s: %Ld\n", #x, (long long)(x))
 #define PN(x) \
 	SEQ_printf(m, "  .%-40s: %Ld.%06ld\n", #x, SPLIT_NS(x))
-	P(jiffies);
 	PN(sysctl_sched_latency);
 	PN(sysctl_sched_min_granularity);
 	PN(sysctl_sched_wakeup_granularity);
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index f4f6a8326dd..c62ebae65cf 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -89,6 +89,13 @@ unsigned int normalized_sysctl_sched_wakeup_granularity = 1000000UL;
 
 const_debug unsigned int sysctl_sched_migration_cost = 500000UL;
 
+/*
+ * The exponential sliding  window over which load is averaged for shares
+ * distribution.
+ * (default: 10msec)
+ */
+unsigned int __read_mostly sysctl_sched_shares_window = 10000000UL;
+
 static const struct sched_class fair_sched_class;
 
 /**************************************************************
@@ -143,6 +150,36 @@ static inline struct cfs_rq *cpu_cfs_rq(struct cfs_rq *cfs_rq, int this_cpu)
 	return cfs_rq->tg->cfs_rq[this_cpu];
 }
 
+static inline void list_add_leaf_cfs_rq(struct cfs_rq *cfs_rq)
+{
+	if (!cfs_rq->on_list) {
+		/*
+		 * Ensure we either appear before our parent (if already
+		 * enqueued) or force our parent to appear after us when it is
+		 * enqueued.  The fact that we always enqueue bottom-up
+		 * reduces this to two cases.
+		 */
+		if (cfs_rq->tg->parent &&
+		    cfs_rq->tg->parent->cfs_rq[cpu_of(rq_of(cfs_rq))]->on_list) {
+			list_add_rcu(&cfs_rq->leaf_cfs_rq_list,
+				&rq_of(cfs_rq)->leaf_cfs_rq_list);
+		} else {
+			list_add_tail_rcu(&cfs_rq->leaf_cfs_rq_list,
+				&rq_of(cfs_rq)->leaf_cfs_rq_list);
+		}
+
+		cfs_rq->on_list = 1;
+	}
+}
+
+static inline void list_del_leaf_cfs_rq(struct cfs_rq *cfs_rq)
+{
+	if (cfs_rq->on_list) {
+		list_del_rcu(&cfs_rq->leaf_cfs_rq_list);
+		cfs_rq->on_list = 0;
+	}
+}
+
 /* Iterate thr' all leaf cfs_rq's on a runqueue */
 #define for_each_leaf_cfs_rq(rq, cfs_rq) \
 	list_for_each_entry_rcu(cfs_rq, &rq->leaf_cfs_rq_list, leaf_cfs_rq_list)
@@ -246,6 +283,14 @@ static inline struct cfs_rq *cpu_cfs_rq(struct cfs_rq *cfs_rq, int this_cpu)
 	return &cpu_rq(this_cpu)->cfs;
 }
 
+static inline void list_add_leaf_cfs_rq(struct cfs_rq *cfs_rq)
+{
+}
+
+static inline void list_del_leaf_cfs_rq(struct cfs_rq *cfs_rq)
+{
+}
+
 #define for_each_leaf_cfs_rq(rq, cfs_rq) \
 		for (cfs_rq = &rq->cfs; cfs_rq; cfs_rq = NULL)
 
@@ -417,7 +462,6 @@ int sched_proc_update_handler(struct ctl_table *table, int write,
 	WRT_SYSCTL(sched_min_granularity);
 	WRT_SYSCTL(sched_latency);
 	WRT_SYSCTL(sched_wakeup_granularity);
-	WRT_SYSCTL(sched_shares_ratelimit);
 #undef WRT_SYSCTL
 
 	return 0;
@@ -495,6 +539,9 @@ static u64 sched_vslice(struct cfs_rq *cfs_rq, struct sched_entity *se)
 	return calc_delta_fair(sched_slice(cfs_rq, se), se);
 }
 
+static void update_cfs_load(struct cfs_rq *cfs_rq, int global_update);
+static void update_cfs_shares(struct cfs_rq *cfs_rq, long weight_delta);
+
 /*
  * Update the current task's runtime statistics. Skip current tasks that
  * are not in our scheduling class.
@@ -514,6 +561,10 @@ __update_curr(struct cfs_rq *cfs_rq, struct sched_entity *curr,
 
 	curr->vruntime += delta_exec_weighted;
 	update_min_vruntime(cfs_rq);
+
+#if defined CONFIG_SMP && defined CONFIG_FAIR_GROUP_SCHED
+	cfs_rq->load_unacc_exec_time += delta_exec;
+#endif
 }
 
 static void update_curr(struct cfs_rq *cfs_rq)
@@ -633,7 +684,6 @@ account_entity_enqueue(struct cfs_rq *cfs_rq, struct sched_entity *se)
 		list_add(&se->group_node, &cfs_rq->tasks);
 	}
 	cfs_rq->nr_running++;
-	se->on_rq = 1;
 }
 
 static void
@@ -647,9 +697,140 @@ account_entity_dequeue(struct cfs_rq *cfs_rq, struct sched_entity *se)
 		list_del_init(&se->group_node);
 	}
 	cfs_rq->nr_running--;
-	se->on_rq = 0;
 }
 
+#if defined CONFIG_SMP && defined CONFIG_FAIR_GROUP_SCHED
+static void update_cfs_rq_load_contribution(struct cfs_rq *cfs_rq,
+					    int global_update)
+{
+	struct task_group *tg = cfs_rq->tg;
+	long load_avg;
+
+	load_avg = div64_u64(cfs_rq->load_avg, cfs_rq->load_period+1);
+	load_avg -= cfs_rq->load_contribution;
+
+	if (global_update || abs(load_avg) > cfs_rq->load_contribution / 8) {
+		atomic_add(load_avg, &tg->load_weight);
+		cfs_rq->load_contribution += load_avg;
+	}
+}
+
+static void update_cfs_load(struct cfs_rq *cfs_rq, int global_update)
+{
+	u64 period = sysctl_sched_shares_window;
+	u64 now, delta;
+	unsigned long load = cfs_rq->load.weight;
+
+	if (!cfs_rq)
+		return;
+
+	now = rq_of(cfs_rq)->clock;
+	delta = now - cfs_rq->load_stamp;
+
+	/* truncate load history at 4 idle periods */
+	if (cfs_rq->load_stamp > cfs_rq->load_last &&
+	    now - cfs_rq->load_last > 4 * period) {
+		cfs_rq->load_period = 0;
+		cfs_rq->load_avg = 0;
+	}
+
+	cfs_rq->load_stamp = now;
+	cfs_rq->load_unacc_exec_time = 0;
+	cfs_rq->load_period += delta;
+	if (load) {
+		cfs_rq->load_last = now;
+		cfs_rq->load_avg += delta * load;
+	}
+
+	/* consider updating load contribution on each fold or truncate */
+	if (global_update || cfs_rq->load_period > period
+	    || !cfs_rq->load_period)
+		update_cfs_rq_load_contribution(cfs_rq, global_update);
+
+	while (cfs_rq->load_period > period) {
+		/*
+		 * Inline assembly required to prevent the compiler
+		 * optimising this loop into a divmod call.
+		 * See __iter_div_u64_rem() for another example of this.
+		 */
+		asm("" : "+rm" (cfs_rq->load_period));
+		cfs_rq->load_period /= 2;
+		cfs_rq->load_avg /= 2;
+	}
+
+	if (!cfs_rq->curr && !cfs_rq->nr_running && !cfs_rq->load_avg)
+		list_del_leaf_cfs_rq(cfs_rq);
+}
+
+static void reweight_entity(struct cfs_rq *cfs_rq, struct sched_entity *se,
+			    unsigned long weight)
+{
+	if (se->on_rq) {
+		/* commit outstanding execution time */
+		if (cfs_rq->curr == se)
+			update_curr(cfs_rq);
+		account_entity_dequeue(cfs_rq, se);
+	}
+
+	update_load_set(&se->load, weight);
+
+	if (se->on_rq)
+		account_entity_enqueue(cfs_rq, se);
+}
+
+static void update_cfs_shares(struct cfs_rq *cfs_rq, long weight_delta)
+{
+	struct task_group *tg;
+	struct sched_entity *se;
+	long load_weight, load, shares;
+
+	if (!cfs_rq)
+		return;
+
+	tg = cfs_rq->tg;
+	se = tg->se[cpu_of(rq_of(cfs_rq))];
+	if (!se)
+		return;
+
+	load = cfs_rq->load.weight + weight_delta;
+
+	load_weight = atomic_read(&tg->load_weight);
+	load_weight -= cfs_rq->load_contribution;
+	load_weight += load;
+
+	shares = (tg->shares * load);
+	if (load_weight)
+		shares /= load_weight;
+
+	if (shares < MIN_SHARES)
+		shares = MIN_SHARES;
+	if (shares > tg->shares)
+		shares = tg->shares;
+
+	reweight_entity(cfs_rq_of(se), se, shares);
+}
+
+static void update_entity_shares_tick(struct cfs_rq *cfs_rq)
+{
+	if (cfs_rq->load_unacc_exec_time > sysctl_sched_shares_window) {
+		update_cfs_load(cfs_rq, 0);
+		update_cfs_shares(cfs_rq, 0);
+	}
+}
+#else /* CONFIG_FAIR_GROUP_SCHED */
+static void update_cfs_load(struct cfs_rq *cfs_rq, int global_update)
+{
+}
+
+static inline void update_cfs_shares(struct cfs_rq *cfs_rq, long weight_delta)
+{
+}
+
+static inline void update_entity_shares_tick(struct cfs_rq *cfs_rq)
+{
+}
+#endif /* CONFIG_FAIR_GROUP_SCHED */
+
 static void enqueue_sleeper(struct cfs_rq *cfs_rq, struct sched_entity *se)
 {
 #ifdef CONFIG_SCHEDSTATS
@@ -771,6 +952,8 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int flags)
 	 * Update run-time statistics of the 'current'.
 	 */
 	update_curr(cfs_rq);
+	update_cfs_load(cfs_rq, 0);
+	update_cfs_shares(cfs_rq, se->load.weight);
 	account_entity_enqueue(cfs_rq, se);
 
 	if (flags & ENQUEUE_WAKEUP) {
@@ -782,6 +965,10 @@ enqueue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int flags)
 	check_spread(cfs_rq, se);
 	if (se != cfs_rq->curr)
 		__enqueue_entity(cfs_rq, se);
+	se->on_rq = 1;
+
+	if (cfs_rq->nr_running == 1)
+		list_add_leaf_cfs_rq(cfs_rq);
 }
 
 static void __clear_buddies(struct cfs_rq *cfs_rq, struct sched_entity *se)
@@ -825,8 +1012,11 @@ dequeue_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int flags)
 
 	if (se != cfs_rq->curr)
 		__dequeue_entity(cfs_rq, se);
+	se->on_rq = 0;
+	update_cfs_load(cfs_rq, 0);
 	account_entity_dequeue(cfs_rq, se);
 	update_min_vruntime(cfs_rq);
+	update_cfs_shares(cfs_rq, 0);
 
 	/*
 	 * Normalize the entity after updating the min_vruntime because the
@@ -955,6 +1145,11 @@ entity_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr, int queued)
 	 */
 	update_curr(cfs_rq);
 
+	/*
+	 * Update share accounting for long-running entities.
+	 */
+	update_entity_shares_tick(cfs_rq);
+
 #ifdef CONFIG_SCHED_HRTICK
 	/*
 	 * queued ticks are scheduled to match the slice, so don't bother
@@ -1055,6 +1250,13 @@ enqueue_task_fair(struct rq *rq, struct task_struct *p, int flags)
 		flags = ENQUEUE_WAKEUP;
 	}
 
+	for_each_sched_entity(se) {
+		struct cfs_rq *cfs_rq = cfs_rq_of(se);
+
+		update_cfs_load(cfs_rq, 0);
+		update_cfs_shares(cfs_rq, 0);
+	}
+
 	hrtick_update(rq);
 }
 
@@ -1071,12 +1273,20 @@ static void dequeue_task_fair(struct rq *rq, struct task_struct *p, int flags)
 	for_each_sched_entity(se) {
 		cfs_rq = cfs_rq_of(se);
 		dequeue_entity(cfs_rq, se, flags);
+
 		/* Don't dequeue parent if it has other entities besides us */
 		if (cfs_rq->load.weight)
 			break;
 		flags |= DEQUEUE_SLEEP;
 	}
 
+	for_each_sched_entity(se) {
+		struct cfs_rq *cfs_rq = cfs_rq_of(se);
+
+		update_cfs_load(cfs_rq, 0);
+		update_cfs_shares(cfs_rq, 0);
+	}
+
 	hrtick_update(rq);
 }
 
@@ -1143,51 +1353,20 @@ static void task_waking_fair(struct rq *rq, struct task_struct *p)
  * Adding load to a group doesn't make a group heavier, but can cause movement
  * of group shares between cpus. Assuming the shares were perfectly aligned one
  * can calculate the shift in shares.
- *
- * The problem is that perfectly aligning the shares is rather expensive, hence
- * we try to avoid doing that too often - see update_shares(), which ratelimits
- * this change.
- *
- * We compensate this by not only taking the current delta into account, but
- * also considering the delta between when the shares were last adjusted and
- * now.
- *
- * We still saw a performance dip, some tracing learned us that between
- * cgroup:/ and cgroup:/foo balancing the number of affine wakeups increased
- * significantly. Therefore try to bias the error in direction of failing
- * the affine wakeup.
- *
  */
-static long effective_load(struct task_group *tg, int cpu,
-		long wl, long wg)
+static long effective_load(struct task_group *tg, int cpu, long wl, long wg)
 {
 	struct sched_entity *se = tg->se[cpu];
 
 	if (!tg->parent)
 		return wl;
 
-	/*
-	 * By not taking the decrease of shares on the other cpu into
-	 * account our error leans towards reducing the affine wakeups.
-	 */
-	if (!wl && sched_feat(ASYM_EFF_LOAD))
-		return wl;
-
 	for_each_sched_entity(se) {
 		long S, rw, s, a, b;
-		long more_w;
-
-		/*
-		 * Instead of using this increment, also add the difference
-		 * between when the shares were last updated and now.
-		 */
-		more_w = se->my_q->load.weight - se->my_q->rq_weight;
-		wl += more_w;
-		wg += more_w;
 
 		S = se->my_q->tg->shares;
-		s = se->my_q->shares;
-		rw = se->my_q->rq_weight;
+		s = se->load.weight;
+		rw = se->my_q->load.weight;
 
 		a = S*(rw + wl);
 		b = S*rw + s*wg;
@@ -1508,23 +1687,6 @@ select_task_rq_fair(struct rq *rq, struct task_struct *p, int sd_flag, int wake_
 			sd = tmp;
 	}
 
-#ifdef CONFIG_FAIR_GROUP_SCHED
-	if (sched_feat(LB_SHARES_UPDATE)) {
-		/*
-		 * Pick the largest domain to update shares over
-		 */
-		tmp = sd;
-		if (affine_sd && (!tmp || affine_sd->span_weight > sd->span_weight))
-			tmp = affine_sd;
-
-		if (tmp) {
-			raw_spin_unlock(&rq->lock);
-			update_shares(tmp);
-			raw_spin_lock(&rq->lock);
-		}
-	}
-#endif
-
 	if (affine_sd) {
 		if (cpu == prev_cpu || wake_affine(affine_sd, p, sync))
 			return select_idle_sibling(p, cpu);
@@ -1654,12 +1816,6 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_
 	struct cfs_rq *cfs_rq = task_cfs_rq(curr);
 	int scale = cfs_rq->nr_running >= sched_nr_latency;
 
-	if (unlikely(rt_prio(p->prio)))
-		goto preempt;
-
-	if (unlikely(p->sched_class != &fair_sched_class))
-		return;
-
 	if (unlikely(se == pse))
 		return;
 
@@ -1764,10 +1920,6 @@ static void pull_task(struct rq *src_rq, struct task_struct *p,
 	set_task_cpu(p, this_cpu);
 	activate_task(this_rq, p, 0);
 	check_preempt_curr(this_rq, p, 0);
-
-	/* re-arm NEWIDLE balancing when moving tasks */
-	src_rq->avg_idle = this_rq->avg_idle = 2*sysctl_sched_migration_cost;
-	this_rq->idle_stamp = 0;
 }
 
 /*
@@ -1919,6 +2071,48 @@ out:
 }
 
 #ifdef CONFIG_FAIR_GROUP_SCHED
+/*
+ * update tg->load_weight by folding this cpu's load_avg
+ */
+static int update_shares_cpu(struct task_group *tg, int cpu)
+{
+	struct cfs_rq *cfs_rq;
+	unsigned long flags;
+	struct rq *rq;
+
+	if (!tg->se[cpu])
+		return 0;
+
+	rq = cpu_rq(cpu);
+	cfs_rq = tg->cfs_rq[cpu];
+
+	raw_spin_lock_irqsave(&rq->lock, flags);
+
+	update_rq_clock(rq);
+	update_cfs_load(cfs_rq, 1);
+
+	/*
+	 * We need to update shares after updating tg->load_weight in
+	 * order to adjust the weight of groups with long running tasks.
+	 */
+	update_cfs_shares(cfs_rq, 0);
+
+	raw_spin_unlock_irqrestore(&rq->lock, flags);
+
+	return 0;
+}
+
+static void update_shares(int cpu)
+{
+	struct cfs_rq *cfs_rq;
+	struct rq *rq = cpu_rq(cpu);
+
+	rcu_read_lock();
+	for_each_leaf_cfs_rq(rq, cfs_rq)
+		update_shares_cpu(cfs_rq->tg, cpu);
+	rcu_read_unlock();
+}
+
 static unsigned long
 load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
 		  unsigned long max_load_move,
@@ -1966,6 +2160,10 @@ load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
 	return max_load_move - rem_load_move;
 }
 #else
+static inline void update_shares(int cpu)
+{
+}
+
 static unsigned long
 load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
 		  unsigned long max_load_move,
@@ -2035,13 +2233,16 @@ struct sd_lb_stats {
 	unsigned long this_load_per_task;
 	unsigned long this_nr_running;
 	unsigned long this_has_capacity;
+	unsigned int  this_idle_cpus;
 
 	/* Statistics of the busiest group */
+	unsigned int  busiest_idle_cpus;
 	unsigned long max_load;
 	unsigned long busiest_load_per_task;
 	unsigned long busiest_nr_running;
 	unsigned long busiest_group_capacity;
 	unsigned long busiest_has_capacity;
+	unsigned int  busiest_group_weight;
 
 	int group_imb; /* Is there imbalance in this sd */
 #if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
@@ -2063,6 +2264,8 @@ struct sg_lb_stats {
 	unsigned long sum_nr_running; /* Nr tasks running in the group */
 	unsigned long sum_weighted_load; /* Weighted load of group's tasks */
 	unsigned long group_capacity;
+	unsigned long idle_cpus;
+	unsigned long group_weight;
 	int group_imb; /* Is there an imbalance in the group ? */
 	int group_has_capacity; /* Is there extra capacity in the group? */
 };
@@ -2431,7 +2634,8 @@ static inline void update_sg_lb_stats(struct sched_domain *sd,
 		sgs->group_load += load;
 		sgs->sum_nr_running += rq->nr_running;
 		sgs->sum_weighted_load += weighted_cpuload(i);
-
+		if (idle_cpu(i))
+			sgs->idle_cpus++;
 	}
 
 	/*
@@ -2469,6 +2673,7 @@ static inline void update_sg_lb_stats(struct sched_domain *sd,
 	sgs->group_capacity = DIV_ROUND_CLOSEST(group->cpu_power, SCHED_LOAD_SCALE);
 	if (!sgs->group_capacity)
 		sgs->group_capacity = fix_small_capacity(sd, group);
+	sgs->group_weight = group->group_weight;
 
 	if (sgs->group_capacity > sgs->sum_nr_running)
 		sgs->group_has_capacity = 1;
@@ -2576,13 +2781,16 @@ static inline void update_sd_lb_stats(struct sched_domain *sd, int this_cpu,
 			sds->this_nr_running = sgs.sum_nr_running;
 			sds->this_load_per_task = sgs.sum_weighted_load;
 			sds->this_has_capacity = sgs.group_has_capacity;
+			sds->this_idle_cpus = sgs.idle_cpus;
 		} else if (update_sd_pick_busiest(sd, sds, sg, &sgs, this_cpu)) {
 			sds->max_load = sgs.avg_load;
 			sds->busiest = sg;
 			sds->busiest_nr_running = sgs.sum_nr_running;
+			sds->busiest_idle_cpus = sgs.idle_cpus;
 			sds->busiest_group_capacity = sgs.group_capacity;
 			sds->busiest_load_per_task = sgs.sum_weighted_load;
 			sds->busiest_has_capacity = sgs.group_has_capacity;
+			sds->busiest_group_weight = sgs.group_weight;
 			sds->group_imb = sgs.group_imb;
 		}
 
@@ -2860,8 +3068,26 @@ find_busiest_group(struct sched_domain *sd, int this_cpu,
 	if (sds.this_load >= sds.avg_load)
 		goto out_balanced;
 
-	if (100 * sds.max_load <= sd->imbalance_pct * sds.this_load)
-		goto out_balanced;
+	/*
+	 * In the CPU_NEWLY_IDLE, use imbalance_pct to be conservative.
+	 * And to check for busy balance use !idle_cpu instead of
+	 * CPU_NOT_IDLE. This is because HT siblings will use CPU_NOT_IDLE
+	 * even when they are idle.
+	 */
+	if (idle == CPU_NEWLY_IDLE || !idle_cpu(this_cpu)) {
+		if (100 * sds.max_load <= sd->imbalance_pct * sds.this_load)
+			goto out_balanced;
+	} else {
+		/*
+		 * This cpu is idle. If the busiest group load doesn't
+		 * have more tasks than the number of available cpu's and
+		 * there is no imbalance between this and busiest group
+		 * wrt to idle cpu's, it is balanced.
+		 */
+		if ((sds.this_idle_cpus  <= sds.busiest_idle_cpus + 1) &&
+		    sds.busiest_nr_running <= sds.busiest_group_weight)
+			goto out_balanced;
+	}
 
 force_balance:
 	/* Looks like there is an imbalance. Compute it */
@@ -3014,7 +3240,6 @@ static int load_balance(int this_cpu, struct rq *this_rq,
 	schedstat_inc(sd, lb_count[idle]);
 
 redo:
-	update_shares(sd);
 	group = find_busiest_group(sd, this_cpu, &imbalance, idle, &sd_idle,
 				   cpus, balance);
 
@@ -3156,8 +3381,6 @@ out_one_pinned:
 	else
 		ld_moved = 0;
 out:
-	if (ld_moved)
-		update_shares(sd);
 	return ld_moved;
 }
 
@@ -3181,6 +3404,7 @@ static void idle_balance(int this_cpu, struct rq *this_rq)
 	 */
 	raw_spin_unlock(&this_rq->lock);
 
+	update_shares(this_cpu);
 	for_each_domain(this_cpu, sd) {
 		unsigned long interval;
 		int balance = 1;
@@ -3197,8 +3421,10 @@ static void idle_balance(int this_cpu, struct rq *this_rq)
 		interval = msecs_to_jiffies(sd->balance_interval);
 		if (time_after(next_balance, sd->last_balance + interval))
 			next_balance = sd->last_balance + interval;
-		if (pulled_task)
+		if (pulled_task) {
+			this_rq->idle_stamp = 0;
 			break;
+		}
 	}
 
 	raw_spin_lock(&this_rq->lock);
@@ -3549,6 +3775,8 @@ static void rebalance_domains(int cpu, enum cpu_idle_type idle)
 	int update_next_balance = 0;
 	int need_serialize;
 
+	update_shares(cpu);
+
 	for_each_domain(cpu, sd) {
 		if (!(sd->flags & SD_LOAD_BALANCE))
 			continue;
diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index 185f920ec1a..68e69acc29b 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -52,8 +52,6 @@ SCHED_FEAT(ARCH_POWER, 0)
 SCHED_FEAT(HRTICK, 0)
 SCHED_FEAT(DOUBLE_TICK, 0)
 SCHED_FEAT(LB_BIAS, 1)
-SCHED_FEAT(LB_SHARES_UPDATE, 1)
-SCHED_FEAT(ASYM_EFF_LOAD, 1)
 
 /*
  * Spin-wait on mutex acquisition when the mutex owner is running on
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index bea7d79f7e9..c914ec747ca 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -183,6 +183,17 @@ static inline u64 sched_rt_period(struct rt_rq *rt_rq)
 	return ktime_to_ns(rt_rq->tg->rt_bandwidth.rt_period);
 }
 
+static inline void list_add_leaf_rt_rq(struct rt_rq *rt_rq)
+{
+	list_add_rcu(&rt_rq->leaf_rt_rq_list,
+			&rq_of_rt_rq(rt_rq)->leaf_rt_rq_list);
+}
+
+static inline void list_del_leaf_rt_rq(struct rt_rq *rt_rq)
+{
+	list_del_rcu(&rt_rq->leaf_rt_rq_list);
+}
+
 #define for_each_leaf_rt_rq(rt_rq, rq) \
 	list_for_each_entry_rcu(rt_rq, &rq->leaf_rt_rq_list, leaf_rt_rq_list)
 
@@ -276,6 +287,14 @@ static inline u64 sched_rt_period(struct rt_rq *rt_rq)
 	return ktime_to_ns(def_rt_bandwidth.rt_period);
 }
 
+static inline void list_add_leaf_rt_rq(struct rt_rq *rt_rq)
+{
+}
+
+static inline void list_del_leaf_rt_rq(struct rt_rq *rt_rq)
+{
+}
+
 #define for_each_leaf_rt_rq(rt_rq, rq) \
 	for (rt_rq = &rq->rt; rt_rq; rt_rq = NULL)
 
@@ -825,6 +844,9 @@ static void __enqueue_rt_entity(struct sched_rt_entity *rt_se, bool head)
 	if (group_rq && (rt_rq_throttled(group_rq) || !group_rq->rt_nr_running))
 		return;
 
+	if (!rt_rq->rt_nr_running)
+		list_add_leaf_rt_rq(rt_rq);
+
 	if (head)
 		list_add(&rt_se->run_list, queue);
 	else
@@ -844,6 +866,8 @@ static void __dequeue_rt_entity(struct sched_rt_entity *rt_se)
 		__clear_bit(rt_se_prio(rt_se), array->bitmap);
 
 	dec_rt_tasks(rt_se, rt_rq);
+	if (!rt_rq->rt_nr_running)
+		list_del_leaf_rt_rq(rt_rq);
 }
 
 /*
diff --git a/kernel/sched_stoptask.c b/kernel/sched_stoptask.c
index 45bddc0c104..2bf6b47058c 100644
--- a/kernel/sched_stoptask.c
+++ b/kernel/sched_stoptask.c
@@ -19,14 +19,14 @@ select_task_rq_stop(struct rq *rq, struct task_struct *p,
 static void
 check_preempt_curr_stop(struct rq *rq, struct task_struct *p, int flags)
 {
-	resched_task(rq->curr); /* we preempt everything */
+	/* we're never preempted */
 }
 
 static struct task_struct *pick_next_task_stop(struct rq *rq)
 {
 	struct task_struct *stop = rq->stop;
 
-	if (stop && stop->state == TASK_RUNNING)
+	if (stop && stop->se.on_rq)
 		return stop;
 
 	return NULL;
diff --git a/kernel/softirq.c b/kernel/softirq.c
index 18f4be0d5fe..0823778f87f 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -70,7 +70,7 @@ char *softirq_to_name[NR_SOFTIRQS] = {
 static void wakeup_softirqd(void)
 {
 	/* Interrupts are disabled: no need to stop preemption */
-	struct task_struct *tsk = __get_cpu_var(ksoftirqd);
+	struct task_struct *tsk = __this_cpu_read(ksoftirqd);
 
 	if (tsk && tsk->state != TASK_RUNNING)
 		wake_up_process(tsk);
@@ -388,8 +388,8 @@ void __tasklet_schedule(struct tasklet_struct *t)
 
 	local_irq_save(flags);
 	t->next = NULL;
-	*__get_cpu_var(tasklet_vec).tail = t;
-	__get_cpu_var(tasklet_vec).tail = &(t->next);
+	*__this_cpu_read(tasklet_vec.tail) = t;
+	__this_cpu_write(tasklet_vec.tail, &(t->next));
 	raise_softirq_irqoff(TASKLET_SOFTIRQ);
 	local_irq_restore(flags);
 }
@@ -402,8 +402,8 @@ void __tasklet_hi_schedule(struct tasklet_struct *t)
 
 	local_irq_save(flags);
 	t->next = NULL;
-	*__get_cpu_var(tasklet_hi_vec).tail = t;
-	__get_cpu_var(tasklet_hi_vec).tail = &(t->next);
+	*__this_cpu_read(tasklet_hi_vec.tail) = t;
+	__this_cpu_write(tasklet_hi_vec.tail,  &(t->next));
 	raise_softirq_irqoff(HI_SOFTIRQ);
 	local_irq_restore(flags);
 }
@@ -414,8 +414,8 @@ void __tasklet_hi_schedule_first(struct tasklet_struct *t)
 {
 	BUG_ON(!irqs_disabled());
 
-	t->next = __get_cpu_var(tasklet_hi_vec).head;
-	__get_cpu_var(tasklet_hi_vec).head = t;
+	t->next = __this_cpu_read(tasklet_hi_vec.head);
+	__this_cpu_write(tasklet_hi_vec.head, t);
 	__raise_softirq_irqoff(HI_SOFTIRQ);
 }
 
@@ -426,9 +426,9 @@ static void tasklet_action(struct softirq_action *a)
 	struct tasklet_struct *list;
 
 	local_irq_disable();
-	list = __get_cpu_var(tasklet_vec).head;
-	__get_cpu_var(tasklet_vec).head = NULL;
-	__get_cpu_var(tasklet_vec).tail = &__get_cpu_var(tasklet_vec).head;
+	list = __this_cpu_read(tasklet_vec.head);
+	__this_cpu_write(tasklet_vec.head, NULL);
+	__this_cpu_write(tasklet_vec.tail, &__get_cpu_var(tasklet_vec).head);
 	local_irq_enable();
 
 	while (list) {
@@ -449,8 +449,8 @@ static void tasklet_action(struct softirq_action *a)
 
 		local_irq_disable();
 		t->next = NULL;
-		*__get_cpu_var(tasklet_vec).tail = t;
-		__get_cpu_var(tasklet_vec).tail = &(t->next);
+		*__this_cpu_read(tasklet_vec.tail) = t;
+		__this_cpu_write(tasklet_vec.tail, &(t->next));
 		__raise_softirq_irqoff(TASKLET_SOFTIRQ);
 		local_irq_enable();
 	}
@@ -461,9 +461,9 @@ static void tasklet_hi_action(struct softirq_action *a)
 	struct tasklet_struct *list;
 
 	local_irq_disable();
-	list = __get_cpu_var(tasklet_hi_vec).head;
-	__get_cpu_var(tasklet_hi_vec).head = NULL;
-	__get_cpu_var(tasklet_hi_vec).tail = &__get_cpu_var(tasklet_hi_vec).head;
+	list = __this_cpu_read(tasklet_hi_vec.head);
+	__this_cpu_write(tasklet_hi_vec.head, NULL);
+	__this_cpu_write(tasklet_hi_vec.tail, &__get_cpu_var(tasklet_hi_vec).head);
 	local_irq_enable();
 
 	while (list) {
@@ -484,8 +484,8 @@ static void tasklet_hi_action(struct softirq_action *a)
 
 		local_irq_disable();
 		t->next = NULL;
-		*__get_cpu_var(tasklet_hi_vec).tail = t;
-		__get_cpu_var(tasklet_hi_vec).tail = &(t->next);
+		*__this_cpu_read(tasklet_hi_vec.tail) = t;
+		__this_cpu_write(tasklet_hi_vec.tail, &(t->next));
 		__raise_softirq_irqoff(HI_SOFTIRQ);
 		local_irq_enable();
 	}
@@ -802,16 +802,16 @@ static void takeover_tasklets(unsigned int cpu)
 
 	/* Find end, append list for that CPU. */
 	if (&per_cpu(tasklet_vec, cpu).head != per_cpu(tasklet_vec, cpu).tail) {
-		*(__get_cpu_var(tasklet_vec).tail) = per_cpu(tasklet_vec, cpu).head;
-		__get_cpu_var(tasklet_vec).tail = per_cpu(tasklet_vec, cpu).tail;
+		*__this_cpu_read(tasklet_vec.tail) = per_cpu(tasklet_vec, cpu).head;
+		this_cpu_write(tasklet_vec.tail, per_cpu(tasklet_vec, cpu).tail);
 		per_cpu(tasklet_vec, cpu).head = NULL;
 		per_cpu(tasklet_vec, cpu).tail = &per_cpu(tasklet_vec, cpu).head;
 	}
 	raise_softirq_irqoff(TASKLET_SOFTIRQ);
 
 	if (&per_cpu(tasklet_hi_vec, cpu).head != per_cpu(tasklet_hi_vec, cpu).tail) {
-		*__get_cpu_var(tasklet_hi_vec).tail = per_cpu(tasklet_hi_vec, cpu).head;
-		__get_cpu_var(tasklet_hi_vec).tail = per_cpu(tasklet_hi_vec, cpu).tail;
+		*__this_cpu_read(tasklet_hi_vec.tail) = per_cpu(tasklet_hi_vec, cpu).head;
+		__this_cpu_write(tasklet_hi_vec.tail, per_cpu(tasklet_hi_vec, cpu).tail);
 		per_cpu(tasklet_hi_vec, cpu).head = NULL;
 		per_cpu(tasklet_hi_vec, cpu).tail = &per_cpu(tasklet_hi_vec, cpu).head;
 	}
@@ -853,7 +853,9 @@ static int __cpuinit cpu_callback(struct notifier_block *nfb,
 			     cpumask_any(cpu_online_mask));
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN: {
-		struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
+		static const struct sched_param param = {
+			.sched_priority = MAX_RT_PRIO-1
+		};
 
 		p = per_cpu(ksoftirqd, hotcpu);
 		per_cpu(ksoftirqd, hotcpu) = NULL;
diff --git a/kernel/srcu.c b/kernel/srcu.c
index c71e0750053..98d8c1e80ed 100644
--- a/kernel/srcu.c
+++ b/kernel/srcu.c
@@ -31,6 +31,7 @@
 #include <linux/rcupdate.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
+#include <linux/delay.h>
 #include <linux/srcu.h>
 
 static int init_srcu_struct_fields(struct srcu_struct *sp)
@@ -203,9 +204,14 @@ static void __synchronize_srcu(struct srcu_struct *sp, void (*sync_func)(void))
 	 * all srcu_read_lock() calls using the old counters have completed.
 	 * Their corresponding critical sections might well be still
 	 * executing, but the srcu_read_lock() primitives themselves
-	 * will have finished executing.
+	 * will have finished executing.  We initially give readers
+	 * an arbitrarily chosen 10 microseconds to get out of their
+	 * SRCU read-side critical sections, then loop waiting 1/HZ
+	 * seconds per iteration.
 	 */
 
+	if (srcu_readers_active_idx(sp, idx))
+		udelay(CONFIG_SRCU_SYNCHRONIZE_DELAY);
 	while (srcu_readers_active_idx(sp, idx))
 		schedule_timeout_interruptible(1);
 
diff --git a/kernel/sys.c b/kernel/sys.c
index 7f5a0cd296a..2745dcdb6c6 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1080,8 +1080,10 @@ SYSCALL_DEFINE0(setsid)
 	err = session;
 out:
 	write_unlock_irq(&tasklist_lock);
-	if (err > 0)
+	if (err > 0) {
 		proc_sid_connector(group_leader);
+		sched_autogroup_create_attach(group_leader);
+	}
 	return err;
 }
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index c33a1edb799..ae5cbb1e3ce 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -259,8 +259,6 @@ static int min_wakeup_granularity_ns;			/* 0 usecs */
 static int max_wakeup_granularity_ns = NSEC_PER_SEC;	/* 1 second */
 static int min_sched_tunable_scaling = SCHED_TUNABLESCALING_NONE;
 static int max_sched_tunable_scaling = SCHED_TUNABLESCALING_END-1;
-static int min_sched_shares_ratelimit = 100000; /* 100 usec */
-static int max_sched_shares_ratelimit = NSEC_PER_SEC; /* 1 second */
 #endif
 
 #ifdef CONFIG_COMPACTION
@@ -305,15 +303,6 @@ static struct ctl_table kern_table[] = {
 		.extra2		= &max_wakeup_granularity_ns,
 	},
 	{
-		.procname	= "sched_shares_ratelimit",
-		.data		= &sysctl_sched_shares_ratelimit,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= sched_proc_update_handler,
-		.extra1		= &min_sched_shares_ratelimit,
-		.extra2		= &max_sched_shares_ratelimit,
-	},
-	{
 		.procname	= "sched_tunable_scaling",
 		.data		= &sysctl_sched_tunable_scaling,
 		.maxlen		= sizeof(enum sched_tunable_scaling),
@@ -323,14 +312,6 @@ static struct ctl_table kern_table[] = {
 		.extra2		= &max_sched_tunable_scaling,
 	},
 	{
-		.procname	= "sched_shares_thresh",
-		.data		= &sysctl_sched_shares_thresh,
-		.maxlen		= sizeof(unsigned int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &zero,
-	},
-	{
 		.procname	= "sched_migration_cost",
 		.data		= &sysctl_sched_migration_cost,
 		.maxlen		= sizeof(unsigned int),
@@ -352,6 +333,13 @@ static struct ctl_table kern_table[] = {
 		.proc_handler	= proc_dointvec,
 	},
 	{
+		.procname	= "sched_shares_window",
+		.data		= &sysctl_sched_shares_window,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
 		.procname	= "timer_migration",
 		.data		= &sysctl_timer_migration,
 		.maxlen		= sizeof(unsigned int),
@@ -382,6 +370,17 @@ static struct ctl_table kern_table[] = {
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
+#ifdef CONFIG_SCHED_AUTOGROUP
+	{
+		.procname	= "sched_autogroup_enabled",
+		.data		= &sysctl_sched_autogroup_enabled,
+		.maxlen		= sizeof(unsigned int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+		.extra1		= &zero,
+		.extra2		= &one,
+	},
+#endif
 #ifdef CONFIG_PROVE_LOCKING
 	{
 		.procname	= "prove_locking",
@@ -702,6 +701,15 @@ static struct ctl_table kern_table[] = {
 		.extra1		= &zero,
 		.extra2		= &ten_thousand,
 	},
+	{
+		.procname	= "dmesg_restrict",
+		.data		= &dmesg_restrict,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &zero,
+		.extra2		= &one,
+	},
 #endif
 	{
 		.procname	= "ngroups_max",
@@ -736,21 +744,21 @@ static struct ctl_table kern_table[] = {
 		.extra1		= &zero,
 		.extra2		= &one,
 	},
-#endif
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_LOCKUP_DETECTOR)
 	{
-		.procname       = "unknown_nmi_panic",
-		.data           = &unknown_nmi_panic,
+		.procname       = "nmi_watchdog",
+		.data           = &watchdog_enabled,
 		.maxlen         = sizeof (int),
 		.mode           = 0644,
-		.proc_handler   = proc_dointvec,
+		.proc_handler   = proc_dowatchdog_enabled,
 	},
+#endif
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86)
 	{
-		.procname       = "nmi_watchdog",
-		.data           = &nmi_watchdog_enabled,
+		.procname       = "unknown_nmi_panic",
+		.data           = &unknown_nmi_panic,
 		.maxlen         = sizeof (int),
 		.mode           = 0644,
-		.proc_handler   = proc_nmi_enabled,
+		.proc_handler   = proc_dointvec,
 	},
 #endif
 #if defined(CONFIG_X86)
diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c
index 1357c578606..4b2545a136f 100644
--- a/kernel/sysctl_binary.c
+++ b/kernel/sysctl_binary.c
@@ -136,7 +136,6 @@ static const struct bin_table bin_kern_table[] = {
 	{ CTL_INT,	KERN_IA64_UNALIGNED,		"ignore-unaligned-usertrap" },
 	{ CTL_INT,	KERN_COMPAT_LOG,		"compat-log" },
 	{ CTL_INT,	KERN_MAX_LOCK_DEPTH,		"max_lock_depth" },
-	{ CTL_INT,	KERN_NMI_WATCHDOG,		"nmi_watchdog" },
 	{ CTL_INT,	KERN_PANIC_ON_NMI,		"panic_on_unrecovered_nmi" },
 	{}
 };
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index c8231fb1570..69691eb4b71 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -89,8 +89,7 @@ static int prepare_reply(struct genl_info *info, u8 cmd, struct sk_buff **skbp,
 		return -ENOMEM;
 
 	if (!info) {
-		int seq = get_cpu_var(taskstats_seqnum)++;
-		put_cpu_var(taskstats_seqnum);
+		int seq = this_cpu_inc_return(taskstats_seqnum) - 1;
 
 		reply = genlmsg_put(skb, 0, seq, &family, 0, cmd);
 	} else
@@ -349,25 +348,47 @@ static int parse(struct nlattr *na, struct cpumask *mask)
 	return ret;
 }
 
+#ifdef CONFIG_IA64
+#define TASKSTATS_NEEDS_PADDING 1
+#endif
+
 static struct taskstats *mk_reply(struct sk_buff *skb, int type, u32 pid)
 {
 	struct nlattr *na, *ret;
 	int aggr;
 
-	/* If we don't pad, we end up with alignment on a 4 byte boundary.
-	 * This causes lots of runtime warnings on systems requiring 8 byte
-	 * alignment */
-	u32 pids[2] = { pid, 0 };
-	int pid_size = ALIGN(sizeof(pid), sizeof(long));
-
 	aggr = (type == TASKSTATS_TYPE_PID)
 			? TASKSTATS_TYPE_AGGR_PID
 			: TASKSTATS_TYPE_AGGR_TGID;
 
+	/*
+	 * The taskstats structure is internally aligned on 8 byte
+	 * boundaries but the layout of the aggregrate reply, with
+	 * two NLA headers and the pid (each 4 bytes), actually
+	 * force the entire structure to be unaligned. This causes
+	 * the kernel to issue unaligned access warnings on some
+	 * architectures like ia64. Unfortunately, some software out there
+	 * doesn't properly unroll the NLA packet and assumes that the start
+	 * of the taskstats structure will always be 20 bytes from the start
+	 * of the netlink payload. Aligning the start of the taskstats
+	 * structure breaks this software, which we don't want. So, for now
+	 * the alignment only happens on architectures that require it
+	 * and those users will have to update to fixed versions of those
+	 * packages. Space is reserved in the packet only when needed.
+	 * This ifdef should be removed in several years e.g. 2012 once
+	 * we can be confident that fixed versions are installed on most
+	 * systems. We add the padding before the aggregate since the
+	 * aggregate is already a defined type.
+	 */
+#ifdef TASKSTATS_NEEDS_PADDING
+	if (nla_put(skb, TASKSTATS_TYPE_NULL, 0, NULL) < 0)
+		goto err;
+#endif
 	na = nla_nest_start(skb, aggr);
 	if (!na)
 		goto err;
-	if (nla_put(skb, type, pid_size, pids) < 0)
+
+	if (nla_put(skb, type, sizeof(pid), &pid) < 0)
 		goto err;
 	ret = nla_reserve(skb, TASKSTATS_TYPE_STATS, sizeof(struct taskstats));
 	if (!ret)
@@ -456,6 +477,18 @@ out:
 	return rc;
 }
 
+static size_t taskstats_packet_size(void)
+{
+	size_t size;
+
+	size = nla_total_size(sizeof(u32)) +
+		nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+#ifdef TASKSTATS_NEEDS_PADDING
+	size += nla_total_size(0); /* Padding for alignment */
+#endif
+	return size;
+}
+
 static int cmd_attr_pid(struct genl_info *info)
 {
 	struct taskstats *stats;
@@ -464,8 +497,7 @@ static int cmd_attr_pid(struct genl_info *info)
 	u32 pid;
 	int rc;
 
-	size = nla_total_size(sizeof(u32)) +
-		nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+	size = taskstats_packet_size();
 
 	rc = prepare_reply(info, TASKSTATS_CMD_NEW, &rep_skb, size);
 	if (rc < 0)
@@ -494,8 +526,7 @@ static int cmd_attr_tgid(struct genl_info *info)
 	u32 tgid;
 	int rc;
 
-	size = nla_total_size(sizeof(u32)) +
-		nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+	size = taskstats_packet_size();
 
 	rc = prepare_reply(info, TASKSTATS_CMD_NEW, &rep_skb, size);
 	if (rc < 0)
@@ -570,8 +601,7 @@ void taskstats_exit(struct task_struct *tsk, int group_dead)
 	/*
 	 * Size includes space for nested attributes
 	 */
-	size = nla_total_size(sizeof(u32)) +
-		nla_total_size(sizeof(struct taskstats)) + nla_total_size(0);
+	size = taskstats_packet_size();
 
 	is_thread_group = !!taskstats_tgid_alloc(tsk);
 	if (is_thread_group) {
@@ -581,7 +611,7 @@ void taskstats_exit(struct task_struct *tsk, int group_dead)
 		fill_tgid_exit(tsk);
 	}
 
-	listeners = &__raw_get_cpu_var(listener_array);
+	listeners = __this_cpu_ptr(&listener_array);
 	if (list_empty(&listeners->list))
 		return;
 
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index c18d7efa1b4..df140cd3ea4 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -152,6 +152,7 @@ clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec)
 	 */
 	for (sft = 32; sft > 0; sft--) {
 		tmp = (u64) to << sft;
+		tmp += from / 2;
 		do_div(tmp, from);
 		if ((tmp >> sftacc) == 0)
 			break;
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index b6b898d2eee..051bc80a0c4 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -49,7 +49,7 @@ struct tick_device *tick_get_device(int cpu)
  */
 int tick_is_oneshot_available(void)
 {
-	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
+	struct clock_event_device *dev = __this_cpu_read(tick_cpu_device.evtdev);
 
 	return dev && (dev->features & CLOCK_EVT_FEAT_ONESHOT);
 }
diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c
index aada0e52680..5cbc101f908 100644
--- a/kernel/time/tick-oneshot.c
+++ b/kernel/time/tick-oneshot.c
@@ -95,7 +95,7 @@ int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires,
  */
 int tick_program_event(ktime_t expires, int force)
 {
-	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
+	struct clock_event_device *dev = __this_cpu_read(tick_cpu_device.evtdev);
 
 	return tick_dev_program_event(dev, expires, force);
 }
@@ -167,7 +167,7 @@ int tick_oneshot_mode_active(void)
 	int ret;
 
 	local_irq_save(flags);
-	ret = __get_cpu_var(tick_cpu_device).mode == TICKDEV_MODE_ONESHOT;
+	ret = __this_cpu_read(tick_cpu_device.mode) == TICKDEV_MODE_ONESHOT;
 	local_irq_restore(flags);
 
 	return ret;
diff --git a/kernel/time/timecompare.c b/kernel/time/timecompare.c
index ac38fbb176c..a9ae369925c 100644
--- a/kernel/time/timecompare.c
+++ b/kernel/time/timecompare.c
@@ -21,6 +21,7 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/math64.h>
+#include <linux/kernel.h>
 
 /*
  * fixed point arithmetic scale factor for skew
@@ -57,11 +58,11 @@ int timecompare_offset(struct timecompare *sync,
 	int index;
 	int num_samples = sync->num_samples;
 
-	if (num_samples > sizeof(buffer)/sizeof(buffer[0])) {
+	if (num_samples > ARRAY_SIZE(buffer)) {
 		samples = kmalloc(sizeof(*samples) * num_samples, GFP_ATOMIC);
 		if (!samples) {
 			samples = buffer;
-			num_samples = sizeof(buffer)/sizeof(buffer[0]);
+			num_samples = ARRAY_SIZE(buffer);
 		}
 	} else {
 		samples = buffer;
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 49010d822f7..5bb86da8200 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -32,6 +32,8 @@ struct timekeeper {
 	cycle_t cycle_interval;
 	/* Number of clock shifted nano seconds in one NTP interval. */
 	u64	xtime_interval;
+	/* shifted nano seconds left over when rounding cycle_interval */
+	s64	xtime_remainder;
 	/* Raw nano seconds accumulated per NTP interval. */
 	u32	raw_interval;
 
@@ -62,7 +64,7 @@ struct timekeeper timekeeper;
 static void timekeeper_setup_internals(struct clocksource *clock)
 {
 	cycle_t interval;
-	u64 tmp;
+	u64 tmp, ntpinterval;
 
 	timekeeper.clock = clock;
 	clock->cycle_last = clock->read(clock);
@@ -70,6 +72,7 @@ static void timekeeper_setup_internals(struct clocksource *clock)
 	/* Do the ns -> cycle conversion first, using original mult */
 	tmp = NTP_INTERVAL_LENGTH;
 	tmp <<= clock->shift;
+	ntpinterval = tmp;
 	tmp += clock->mult/2;
 	do_div(tmp, clock->mult);
 	if (tmp == 0)
@@ -80,6 +83,7 @@ static void timekeeper_setup_internals(struct clocksource *clock)
 
 	/* Go back from cycles -> shifted ns */
 	timekeeper.xtime_interval = (u64) interval * clock->mult;
+	timekeeper.xtime_remainder = ntpinterval - timekeeper.xtime_interval;
 	timekeeper.raw_interval =
 		((u64) interval * clock->mult) >> clock->shift;
 
@@ -719,7 +723,8 @@ static cycle_t logarithmic_accumulation(cycle_t offset, int shift)
 
 	/* Accumulate error between NTP and clock interval */
 	timekeeper.ntp_error += tick_length << shift;
-	timekeeper.ntp_error -= timekeeper.xtime_interval <<
+	timekeeper.ntp_error -=
+	    (timekeeper.xtime_interval + timekeeper.xtime_remainder) <<
 				(timekeeper.ntp_error_shift + shift);
 
 	return offset;
diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index ab8f5e33fa9..32a19f9397f 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -79,26 +79,26 @@ print_active_timers(struct seq_file *m, struct hrtimer_clock_base *base,
 {
 	struct hrtimer *timer, tmp;
 	unsigned long next = 0, i;
-	struct rb_node *curr;
+	struct timerqueue_node *curr;
 	unsigned long flags;
 
 next_one:
 	i = 0;
 	raw_spin_lock_irqsave(&base->cpu_base->lock, flags);
 
-	curr = base->first;
+	curr = timerqueue_getnext(&base->active);
 	/*
 	 * Crude but we have to do this O(N*N) thing, because
 	 * we have to unlock the base when printing:
 	 */
 	while (curr && i < next) {
-		curr = rb_next(curr);
+		curr = timerqueue_iterate_next(curr);
 		i++;
 	}
 
 	if (curr) {
 
-		timer = rb_entry(curr, struct hrtimer, node);
+		timer = container_of(curr, struct hrtimer, node);
 		tmp = *timer;
 		raw_spin_unlock_irqrestore(&base->cpu_base->lock, flags);
 
diff --git a/kernel/timer.c b/kernel/timer.c
index 68a9ae7679b..43ca9936f2d 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -88,18 +88,6 @@ struct tvec_base boot_tvec_bases;
 EXPORT_SYMBOL(boot_tvec_bases);
 static DEFINE_PER_CPU(struct tvec_base *, tvec_bases) = &boot_tvec_bases;
 
-/*
- * Note that all tvec_bases are 2 byte aligned and lower bit of
- * base in timer_list is guaranteed to be zero. Use the LSB to
- * indicate whether the timer is deferrable.
- *
- * A deferrable timer will work normally when the system is busy, but
- * will not cause a CPU to come out of idle just to service it; instead,
- * the timer will be serviced when the CPU eventually wakes up with a
- * subsequent non-deferrable timer.
- */
-#define TBASE_DEFERRABLE_FLAG		(0x1)
-
 /* Functions below help us manage 'deferrable' flag */
 static inline unsigned int tbase_get_deferrable(struct tvec_base *base)
 {
@@ -113,8 +101,7 @@ static inline struct tvec_base *tbase_get_base(struct tvec_base *base)
 
 static inline void timer_set_deferrable(struct timer_list *timer)
 {
-	timer->base = ((struct tvec_base *)((unsigned long)(timer->base) |
-				       TBASE_DEFERRABLE_FLAG));
+	timer->base = TBASE_MAKE_DEFERRED(timer->base);
 }
 
 static inline void
@@ -343,15 +330,6 @@ void set_timer_slack(struct timer_list *timer, int slack_hz)
 }
 EXPORT_SYMBOL_GPL(set_timer_slack);
 
-
-static inline void set_running_timer(struct tvec_base *base,
-					struct timer_list *timer)
-{
-#ifdef CONFIG_SMP
-	base->running_timer = timer;
-#endif
-}
-
 static void internal_add_timer(struct tvec_base *base, struct timer_list *timer)
 {
 	unsigned long expires = timer->expires;
@@ -936,15 +914,12 @@ int del_timer(struct timer_list *timer)
 }
 EXPORT_SYMBOL(del_timer);
 
-#ifdef CONFIG_SMP
 /**
  * try_to_del_timer_sync - Try to deactivate a timer
  * @timer: timer do del
  *
  * This function tries to deactivate a timer. Upon successful (ret >= 0)
  * exit the timer is not queued and the handler is not running on any CPU.
- *
- * It must not be called from interrupt contexts.
  */
 int try_to_del_timer_sync(struct timer_list *timer)
 {
@@ -973,6 +948,7 @@ out:
 }
 EXPORT_SYMBOL(try_to_del_timer_sync);
 
+#ifdef CONFIG_SMP
 /**
  * del_timer_sync - deactivate a timer and wait for the handler to finish.
  * @timer: the timer to be deactivated
@@ -983,7 +959,7 @@ EXPORT_SYMBOL(try_to_del_timer_sync);
  *
  * Synchronization rules: Callers must prevent restarting of the timer,
  * otherwise this function is meaningless. It must not be called from
- * interrupt contexts. The caller must not hold locks which would prevent
+ * hardirq contexts. The caller must not hold locks which would prevent
  * completion of the timer's handler. The timer's handler must not call
  * add_timer_on(). Upon exit the timer is not queued and the handler is
  * not running on any CPU.
@@ -993,14 +969,16 @@ EXPORT_SYMBOL(try_to_del_timer_sync);
 int del_timer_sync(struct timer_list *timer)
 {
 #ifdef CONFIG_LOCKDEP
-	unsigned long flags;
-
-	local_irq_save(flags);
+	local_bh_disable();
 	lock_map_acquire(&timer->lockdep_map);
 	lock_map_release(&timer->lockdep_map);
-	local_irq_restore(flags);
+	local_bh_enable();
 #endif
-
+	/*
+	 * don't use it in hardirq context, because it
+	 * could lead to deadlock.
+	 */
+	WARN_ON(in_irq());
 	for (;;) {
 		int ret = try_to_del_timer_sync(timer);
 		if (ret >= 0)
@@ -1111,7 +1089,7 @@ static inline void __run_timers(struct tvec_base *base)
 
 			timer_stats_account_timer(timer);
 
-			set_running_timer(base, timer);
+			base->running_timer = timer;
 			detach_timer(timer, 1);
 
 			spin_unlock_irq(&base->lock);
@@ -1119,7 +1097,7 @@ static inline void __run_timers(struct tvec_base *base)
 			spin_lock_irq(&base->lock);
 		}
 	}
-	set_running_timer(base, NULL);
+	base->running_timer = NULL;
 	spin_unlock_irq(&base->lock);
 }
 
@@ -1249,9 +1227,15 @@ static unsigned long cmp_next_hrtimer_event(unsigned long now,
  */
 unsigned long get_next_timer_interrupt(unsigned long now)
 {
-	struct tvec_base *base = __get_cpu_var(tvec_bases);
+	struct tvec_base *base = __this_cpu_read(tvec_bases);
 	unsigned long expires;
 
+	/*
+	 * Pretend that there is no timer pending if the cpu is offline.
+	 * Possible pending timers will be migrated later to an active cpu.
+	 */
+	if (cpu_is_offline(smp_processor_id()))
+		return now + NEXT_TIMER_MAX_DELTA;
 	spin_lock(&base->lock);
 	if (time_before_eq(base->next_timer, base->timer_jiffies))
 		base->next_timer = __next_timer_interrupt(base);
@@ -1292,7 +1276,7 @@ void update_process_times(int user_tick)
  */
 static void run_timer_softirq(struct softirq_action *h)
 {
-	struct tvec_base *base = __get_cpu_var(tvec_bases);
+	struct tvec_base *base = __this_cpu_read(tvec_bases);
 
 	hrtimer_run_pending();
 
@@ -1319,7 +1303,7 @@ void do_timer(unsigned long ticks)
 {
 	jiffies_64 += ticks;
 	update_wall_time();
-	calc_global_load();
+	calc_global_load(ticks);
 }
 
 #ifdef __ARCH_WANT_SYS_ALARM
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index e04b8bcdef8..14674dce77a 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -69,6 +69,21 @@ config EVENT_TRACING
 	select CONTEXT_SWITCH_TRACER
 	bool
 
+config EVENT_POWER_TRACING_DEPRECATED
+	depends on EVENT_TRACING
+	bool "Deprecated power event trace API, to be removed"
+	default y
+	help
+	  Provides old power event types:
+	  C-state/idle accounting events:
+	  power:power_start
+	  power:power_end
+	  and old cpufreq accounting event:
+	  power:power_frequency
+	  This is for userspace compatibility
+	  and will vanish after 5 kernel iterations,
+	  namely 2.6.41.
+
 config CONTEXT_SWITCH_TRACER
 	bool
 
@@ -126,7 +141,7 @@ if FTRACE
 config FUNCTION_TRACER
 	bool "Kernel Function Tracer"
 	depends on HAVE_FUNCTION_TRACER
-	select FRAME_POINTER if (!ARM_UNWIND)
+	select FRAME_POINTER if !ARM_UNWIND && !S390
 	select KALLSYMS
 	select GENERIC_TRACER
 	select CONTEXT_SWITCH_TRACER
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index bc251ed6672..7b8ec028154 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -168,7 +168,6 @@ static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector,
 static const u32 ddir_act[2] = { BLK_TC_ACT(BLK_TC_READ),
 				 BLK_TC_ACT(BLK_TC_WRITE) };
 
-#define BLK_TC_HARDBARRIER	BLK_TC_BARRIER
 #define BLK_TC_RAHEAD		BLK_TC_AHEAD
 
 /* The ilog2() calls fall out because they're constant */
@@ -196,7 +195,6 @@ static void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes,
 		return;
 
 	what |= ddir_act[rw & WRITE];
-	what |= MASK_TC_BIT(rw, HARDBARRIER);
 	what |= MASK_TC_BIT(rw, SYNC);
 	what |= MASK_TC_BIT(rw, RAHEAD);
 	what |= MASK_TC_BIT(rw, META);
@@ -1807,8 +1805,6 @@ void blk_fill_rwbs(char *rwbs, u32 rw, int bytes)
 
 	if (rw & REQ_RAHEAD)
 		rwbs[i++] = 'A';
-	if (rw & REQ_HARDBARRIER)
-		rwbs[i++] = 'B';
 	if (rw & REQ_SYNC)
 		rwbs[i++] = 'S';
 	if (rw & REQ_META)
diff --git a/kernel/trace/power-traces.c b/kernel/trace/power-traces.c
index a22582a0616..f55fcf61b22 100644
--- a/kernel/trace/power-traces.c
+++ b/kernel/trace/power-traces.c
@@ -13,5 +13,8 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/power.h>
 
-EXPORT_TRACEPOINT_SYMBOL_GPL(power_frequency);
+#ifdef EVENT_POWER_TRACING_DEPRECATED
+EXPORT_TRACEPOINT_SYMBOL_GPL(power_start);
+#endif
+EXPORT_TRACEPOINT_SYMBOL_GPL(cpu_idle);
 
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 9ed509a015d..bd1c35a4fbc 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -3853,6 +3853,13 @@ int ring_buffer_read_page(struct ring_buffer *buffer,
 
 		/* Need to copy one event at a time */
 		do {
+			/* We need the size of one event, because
+			 * rb_advance_reader only advances by one event,
+			 * whereas rb_event_ts_length may include the size of
+			 * one or two events.
+			 * We have already ensured there's enough space if this
+			 * is a time extend. */
+			size = rb_event_length(event);
 			memcpy(bpage->data + pos, rpage->data + rpos, size);
 
 			len -= size;
@@ -3867,7 +3874,7 @@ int ring_buffer_read_page(struct ring_buffer *buffer,
 			event = rb_reader_event(cpu_buffer);
 			/* Always keep the time extend and data together */
 			size = rb_event_ts_length(event);
-		} while (len > size);
+		} while (len >= size);
 
 		/* update bpage */
 		local_set(&bpage->commit, pos);
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 82d9b8106cd..f8cf959bad4 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -17,7 +17,6 @@
 #include <linux/writeback.h>
 #include <linux/kallsyms.h>
 #include <linux/seq_file.h>
-#include <linux/smp_lock.h>
 #include <linux/notifier.h>
 #include <linux/irqflags.h>
 #include <linux/debugfs.h>
@@ -1284,6 +1283,8 @@ void trace_dump_stack(void)
 	__ftrace_trace_stack(global_trace.buffer, flags, 3, preempt_count());
 }
 
+static DEFINE_PER_CPU(int, user_stack_count);
+
 void
 ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
 {
@@ -1302,6 +1303,18 @@ ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
 	if (unlikely(in_nmi()))
 		return;
 
+	/*
+	 * prevent recursion, since the user stack tracing may
+	 * trigger other kernel events.
+	 */
+	preempt_disable();
+	if (__this_cpu_read(user_stack_count))
+		goto out;
+
+	__this_cpu_inc(user_stack_count);
+
+
+
 	event = trace_buffer_lock_reserve(buffer, TRACE_USER_STACK,
 					  sizeof(*entry), flags, pc);
 	if (!event)
@@ -1319,6 +1332,11 @@ ftrace_trace_userstack(struct ring_buffer *buffer, unsigned long flags, int pc)
 	save_stack_trace_user(&trace);
 	if (!filter_check_discard(call, entry, buffer, event))
 		ring_buffer_unlock_commit(buffer, event);
+
+	__this_cpu_dec(user_stack_count);
+
+ out:
+	preempt_enable();
 }
 
 #ifdef UNUSED
@@ -2320,11 +2338,19 @@ tracing_write_stub(struct file *filp, const char __user *ubuf,
 	return count;
 }
 
+static loff_t tracing_seek(struct file *file, loff_t offset, int origin)
+{
+	if (file->f_mode & FMODE_READ)
+		return seq_lseek(file, offset, origin);
+	else
+		return 0;
+}
+
 static const struct file_operations tracing_fops = {
 	.open		= tracing_open,
 	.read		= seq_read,
 	.write		= tracing_write_stub,
-	.llseek		= seq_lseek,
+	.llseek		= tracing_seek,
 	.release	= tracing_release,
 };
 
diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index 39c059ca670..19a359d5e6d 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -21,17 +21,46 @@ typedef typeof(unsigned long [PERF_MAX_TRACE_SIZE / sizeof(unsigned long)])
 /* Count the events in use (per event id, not per instance) */
 static int	total_ref_count;
 
+static int perf_trace_event_perm(struct ftrace_event_call *tp_event,
+				 struct perf_event *p_event)
+{
+	/* No tracing, just counting, so no obvious leak */
+	if (!(p_event->attr.sample_type & PERF_SAMPLE_RAW))
+		return 0;
+
+	/* Some events are ok to be traced by non-root users... */
+	if (p_event->attach_state == PERF_ATTACH_TASK) {
+		if (tp_event->flags & TRACE_EVENT_FL_CAP_ANY)
+			return 0;
+	}
+
+	/*
+	 * ...otherwise raw tracepoint data can be a severe data leak,
+	 * only allow root to have these.
+	 */
+	if (perf_paranoid_tracepoint_raw() && !capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	return 0;
+}
+
 static int perf_trace_event_init(struct ftrace_event_call *tp_event,
 				 struct perf_event *p_event)
 {
 	struct hlist_head __percpu *list;
-	int ret = -ENOMEM;
+	int ret;
 	int cpu;
 
+	ret = perf_trace_event_perm(tp_event, p_event);
+	if (ret)
+		return ret;
+
 	p_event->tp_event = tp_event;
 	if (tp_event->perf_refcount++ > 0)
 		return 0;
 
+	ret = -ENOMEM;
+
 	list = alloc_percpu(struct hlist_head);
 	if (!list)
 		goto fail;
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 0725eeab193..35fde09b81d 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -27,6 +27,12 @@
 
 DEFINE_MUTEX(event_mutex);
 
+DEFINE_MUTEX(event_storage_mutex);
+EXPORT_SYMBOL_GPL(event_storage_mutex);
+
+char event_storage[EVENT_STORAGE_SIZE];
+EXPORT_SYMBOL_GPL(event_storage);
+
 LIST_HEAD(ftrace_events);
 LIST_HEAD(ftrace_common_fields);
 
diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c
index 4ba44deaac2..4b74d71705c 100644
--- a/kernel/trace/trace_export.c
+++ b/kernel/trace/trace_export.c
@@ -83,13 +83,19 @@ static void __always_unused ____ftrace_check_##name(void)	\
 
 #undef __array
 #define __array(type, item, len)					\
-	BUILD_BUG_ON(len > MAX_FILTER_STR_VAL);				\
-	ret = trace_define_field(event_call, #type "[" #len "]", #item,	\
+	do {								\
+		BUILD_BUG_ON(len > MAX_FILTER_STR_VAL);			\
+		mutex_lock(&event_storage_mutex);			\
+		snprintf(event_storage, sizeof(event_storage),		\
+			 "%s[%d]", #type, len);				\
+		ret = trace_define_field(event_call, event_storage, #item, \
 				 offsetof(typeof(field), item),		\
 				 sizeof(field.item),			\
 				 is_signed_type(type), FILTER_OTHER);	\
-	if (ret)							\
-		return ret;
+		mutex_unlock(&event_storage_mutex);			\
+		if (ret)						\
+			return ret;					\
+	} while (0);
 
 #undef __array_desc
 #define __array_desc(type, container, item, len)			\
diff --git a/kernel/trace/trace_selftest.c b/kernel/trace/trace_selftest.c
index 155a415b320..659732eba07 100644
--- a/kernel/trace/trace_selftest.c
+++ b/kernel/trace/trace_selftest.c
@@ -558,7 +558,7 @@ trace_selftest_startup_nop(struct tracer *trace, struct trace_array *tr)
 static int trace_wakeup_test_thread(void *data)
 {
 	/* Make this a RT thread, doesn't need to be too high */
-	struct sched_param param = { .sched_priority = 5 };
+	static const struct sched_param param = { .sched_priority = 5 };
 	struct completion *x = data;
 
 	sched_setscheduler(current, SCHED_FIFO, &param);
diff --git a/kernel/user.c b/kernel/user.c
index 2c7d8d5914b..5c598ca781d 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -158,6 +158,7 @@ struct user_struct *alloc_uid(struct user_namespace *ns, uid_t uid)
 		spin_lock_irq(&uidhash_lock);
 		up = uid_hash_find(uid, hashent);
 		if (up) {
+			put_user_ns(ns);
 			key_put(new->uid_keyring);
 			key_put(new->session_keyring);
 			kmem_cache_free(uid_cachep, new);
diff --git a/kernel/watchdog.c b/kernel/watchdog.c
index 6e3c41a4024..d7ebdf4cea9 100644
--- a/kernel/watchdog.c
+++ b/kernel/watchdog.c
@@ -57,6 +57,8 @@ static int __init hardlockup_panic_setup(char *str)
 {
 	if (!strncmp(str, "panic", 5))
 		hardlockup_panic = 1;
+	else if (!strncmp(str, "0", 1))
+		no_watchdog = 1;
 	return 1;
 }
 __setup("nmi_watchdog=", hardlockup_panic_setup);
@@ -116,12 +118,12 @@ static void __touch_watchdog(void)
 {
 	int this_cpu = smp_processor_id();
 
-	__get_cpu_var(watchdog_touch_ts) = get_timestamp(this_cpu);
+	__this_cpu_write(watchdog_touch_ts, get_timestamp(this_cpu));
 }
 
 void touch_softlockup_watchdog(void)
 {
-	__raw_get_cpu_var(watchdog_touch_ts) = 0;
+	__this_cpu_write(watchdog_touch_ts, 0);
 }
 EXPORT_SYMBOL(touch_softlockup_watchdog);
 
@@ -165,12 +167,12 @@ void touch_softlockup_watchdog_sync(void)
 /* watchdog detector functions */
 static int is_hardlockup(void)
 {
-	unsigned long hrint = __get_cpu_var(hrtimer_interrupts);
+	unsigned long hrint = __this_cpu_read(hrtimer_interrupts);
 
-	if (__get_cpu_var(hrtimer_interrupts_saved) == hrint)
+	if (__this_cpu_read(hrtimer_interrupts_saved) == hrint)
 		return 1;
 
-	__get_cpu_var(hrtimer_interrupts_saved) = hrint;
+	__this_cpu_write(hrtimer_interrupts_saved, hrint);
 	return 0;
 }
 #endif
@@ -203,8 +205,8 @@ static void watchdog_overflow_callback(struct perf_event *event, int nmi,
 	/* Ensure the watchdog never gets throttled */
 	event->hw.interrupts = 0;
 
-	if (__get_cpu_var(watchdog_nmi_touch) == true) {
-		__get_cpu_var(watchdog_nmi_touch) = false;
+	if (__this_cpu_read(watchdog_nmi_touch) == true) {
+		__this_cpu_write(watchdog_nmi_touch, false);
 		return;
 	}
 
@@ -218,7 +220,7 @@ static void watchdog_overflow_callback(struct perf_event *event, int nmi,
 		int this_cpu = smp_processor_id();
 
 		/* only print hardlockups once */
-		if (__get_cpu_var(hard_watchdog_warn) == true)
+		if (__this_cpu_read(hard_watchdog_warn) == true)
 			return;
 
 		if (hardlockup_panic)
@@ -226,16 +228,16 @@ static void watchdog_overflow_callback(struct perf_event *event, int nmi,
 		else
 			WARN(1, "Watchdog detected hard LOCKUP on cpu %d", this_cpu);
 
-		__get_cpu_var(hard_watchdog_warn) = true;
+		__this_cpu_write(hard_watchdog_warn, true);
 		return;
 	}
 
-	__get_cpu_var(hard_watchdog_warn) = false;
+	__this_cpu_write(hard_watchdog_warn, false);
 	return;
 }
 static void watchdog_interrupt_count(void)
 {
-	__get_cpu_var(hrtimer_interrupts)++;
+	__this_cpu_inc(hrtimer_interrupts);
 }
 #else
 static inline void watchdog_interrupt_count(void) { return; }
@@ -244,7 +246,7 @@ static inline void watchdog_interrupt_count(void) { return; }
 /* watchdog kicker functions */
 static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
 {
-	unsigned long touch_ts = __get_cpu_var(watchdog_touch_ts);
+	unsigned long touch_ts = __this_cpu_read(watchdog_touch_ts);
 	struct pt_regs *regs = get_irq_regs();
 	int duration;
 
@@ -252,18 +254,18 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
 	watchdog_interrupt_count();
 
 	/* kick the softlockup detector */
-	wake_up_process(__get_cpu_var(softlockup_watchdog));
+	wake_up_process(__this_cpu_read(softlockup_watchdog));
 
 	/* .. and repeat */
 	hrtimer_forward_now(hrtimer, ns_to_ktime(get_sample_period()));
 
 	if (touch_ts == 0) {
-		if (unlikely(__get_cpu_var(softlockup_touch_sync))) {
+		if (unlikely(__this_cpu_read(softlockup_touch_sync))) {
 			/*
 			 * If the time stamp was touched atomically
 			 * make sure the scheduler tick is up to date.
 			 */
-			__get_cpu_var(softlockup_touch_sync) = false;
+			__this_cpu_write(softlockup_touch_sync, false);
 			sched_clock_tick();
 		}
 		__touch_watchdog();
@@ -279,7 +281,7 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
 	duration = is_softlockup(touch_ts);
 	if (unlikely(duration)) {
 		/* only warn once */
-		if (__get_cpu_var(soft_watchdog_warn) == true)
+		if (__this_cpu_read(soft_watchdog_warn) == true)
 			return HRTIMER_RESTART;
 
 		printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n",
@@ -294,9 +296,9 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
 
 		if (softlockup_panic)
 			panic("softlockup: hung tasks");
-		__get_cpu_var(soft_watchdog_warn) = true;
+		__this_cpu_write(soft_watchdog_warn, true);
 	} else
-		__get_cpu_var(soft_watchdog_warn) = false;
+		__this_cpu_write(soft_watchdog_warn, false);
 
 	return HRTIMER_RESTART;
 }
@@ -307,7 +309,7 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer)
  */
 static int watchdog(void *unused)
 {
-	struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
+	static struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 };
 	struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer);
 
 	sched_setscheduler(current, SCHED_FIFO, &param);
@@ -364,7 +366,8 @@ static int watchdog_nmi_enable(int cpu)
 		goto out_save;
 	}
 
-	printk(KERN_ERR "NMI watchdog failed to create perf event on cpu%i: %p\n", cpu, event);
+	printk(KERN_ERR "NMI watchdog disabled for cpu%i: unable to create perf event: %ld\n",
+	       cpu, PTR_ERR(event));
 	return PTR_ERR(event);
 
 	/* success path */
@@ -547,13 +550,13 @@ static struct notifier_block __cpuinitdata cpu_nfb = {
 	.notifier_call = cpu_callback
 };
 
-static int __init spawn_watchdog_task(void)
+void __init lockup_detector_init(void)
 {
 	void *cpu = (void *)(long)smp_processor_id();
 	int err;
 
 	if (no_watchdog)
-		return 0;
+		return;
 
 	err = cpu_callback(&cpu_nfb, CPU_UP_PREPARE, cpu);
 	WARN_ON(notifier_to_errno(err));
@@ -561,6 +564,5 @@ static int __init spawn_watchdog_task(void)
 	cpu_callback(&cpu_nfb, CPU_ONLINE, cpu);
 	register_cpu_notifier(&cpu_nfb);
 
-	return 0;
+	return;
 }
-early_initcall(spawn_watchdog_task);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 90db1bd1a97..8ee6ec82f88 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -661,7 +661,7 @@ void wq_worker_waking_up(struct task_struct *task, unsigned int cpu)
 {
 	struct worker *worker = kthread_data(task);
 
-	if (likely(!(worker->flags & WORKER_NOT_RUNNING)))
+	if (!(worker->flags & WORKER_NOT_RUNNING))
 		atomic_inc(get_gcwq_nr_running(cpu));
 }
 
@@ -687,7 +687,7 @@ struct task_struct *wq_worker_sleeping(struct task_struct *task,
 	struct global_cwq *gcwq = get_gcwq(cpu);
 	atomic_t *nr_running = get_gcwq_nr_running(cpu);
 
-	if (unlikely(worker->flags & WORKER_NOT_RUNNING))
+	if (worker->flags & WORKER_NOT_RUNNING)
 		return NULL;
 
 	/* this can only happen on the local cpu */
@@ -932,6 +932,38 @@ static void insert_work(struct cpu_workqueue_struct *cwq,
 		wake_up_worker(gcwq);
 }
 
+/*
+ * Test whether @work is being queued from another work executing on the
+ * same workqueue.  This is rather expensive and should only be used from
+ * cold paths.
+ */
+static bool is_chained_work(struct workqueue_struct *wq)
+{
+	unsigned long flags;
+	unsigned int cpu;
+
+	for_each_gcwq_cpu(cpu) {
+		struct global_cwq *gcwq = get_gcwq(cpu);
+		struct worker *worker;
+		struct hlist_node *pos;
+		int i;
+
+		spin_lock_irqsave(&gcwq->lock, flags);
+		for_each_busy_worker(worker, i, pos, gcwq) {
+			if (worker->task != current)
+				continue;
+			spin_unlock_irqrestore(&gcwq->lock, flags);
+			/*
+			 * I'm @worker, no locking necessary.  See if @work
+			 * is headed to the same workqueue.
+			 */
+			return worker->current_cwq->wq == wq;
+		}
+		spin_unlock_irqrestore(&gcwq->lock, flags);
+	}
+	return false;
+}
+
 static void __queue_work(unsigned int cpu, struct workqueue_struct *wq,
 			 struct work_struct *work)
 {
@@ -943,7 +975,9 @@ static void __queue_work(unsigned int cpu, struct workqueue_struct *wq,
 
 	debug_work_activate(work);
 
-	if (WARN_ON_ONCE(wq->flags & WQ_DYING))
+	/* if dying, only works from the same workqueue are allowed */
+	if (unlikely(wq->flags & WQ_DYING) &&
+	    WARN_ON_ONCE(!is_chained_work(wq)))
 		return;
 
 	/* determine gcwq to use */
@@ -2936,11 +2970,35 @@ EXPORT_SYMBOL_GPL(__alloc_workqueue_key);
  */
 void destroy_workqueue(struct workqueue_struct *wq)
 {
+	unsigned int flush_cnt = 0;
 	unsigned int cpu;
 
+	/*
+	 * Mark @wq dying and drain all pending works.  Once WQ_DYING is
+	 * set, only chain queueing is allowed.  IOW, only currently
+	 * pending or running work items on @wq can queue further work
+	 * items on it.  @wq is flushed repeatedly until it becomes empty.
+	 * The number of flushing is detemined by the depth of chaining and
+	 * should be relatively short.  Whine if it takes too long.
+	 */
 	wq->flags |= WQ_DYING;
+reflush:
 	flush_workqueue(wq);
 
+	for_each_cwq_cpu(cpu, wq) {
+		struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+
+		if (!cwq->nr_active && list_empty(&cwq->delayed_works))
+			continue;
+
+		if (++flush_cnt == 10 ||
+		    (flush_cnt % 100 == 0 && flush_cnt <= 1000))
+			printk(KERN_WARNING "workqueue %s: flush on "
+			       "destruction isn't complete after %u tries\n",
+			       wq->name, flush_cnt);
+		goto reflush;
+	}
+
 	/*
 	 * wq list is used to freeze wq, remove from list after
 	 * flushing is complete in case freeze races us.
@@ -3692,7 +3750,8 @@ static int __init init_workqueues(void)
 	system_nrt_wq = alloc_workqueue("events_nrt", WQ_NON_REENTRANT, 0);
 	system_unbound_wq = alloc_workqueue("events_unbound", WQ_UNBOUND,
 					    WQ_UNBOUND_MAX_ACTIVE);
-	BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq);
+	BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq ||
+	       !system_unbound_wq);
 	return 0;
 }
 early_initcall(init_workqueues);
diff --git a/lib/Kconfig b/lib/Kconfig
index fa9bf2c0619..3116aa631af 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -210,4 +210,7 @@ config GENERIC_ATOMIC64
 config LRU_CACHE
 	tristate
 
+config AVERAGE
+	bool
+
 endmenu
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 28b42b9274d..2d05adb9840 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -173,7 +173,8 @@ config LOCKUP_DETECTOR
 	  An NMI is generated every 60 seconds or so to check for hardlockups.
 
 config HARDLOCKUP_DETECTOR
-	def_bool LOCKUP_DETECTOR && PERF_EVENTS && HAVE_PERF_EVENTS_NMI
+	def_bool LOCKUP_DETECTOR && PERF_EVENTS && HAVE_PERF_EVENTS_NMI && \
+		 !ARCH_HAS_NMI_WATCHDOG
 
 config BOOTPARAM_SOFTLOCKUP_PANIC
 	bool "Panic (Reboot) On Soft Lockups"
diff --git a/lib/Makefile b/lib/Makefile
index e6a3763b821..d7b6e30a3a1 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -8,7 +8,7 @@ KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS))
 endif
 
 lib-y := ctype.o string.o vsprintf.o cmdline.o \
-	 rbtree.o radix-tree.o dump_stack.o \
+	 rbtree.o radix-tree.o dump_stack.o timerqueue.o\
 	 idr.o int_sqrt.o extable.o prio_tree.o \
 	 sha1.o irq_regs.o reciprocal_div.o argv_split.o \
 	 proportions.o prio_heap.o ratelimit.o show_mem.o \
@@ -106,6 +106,8 @@ obj-$(CONFIG_GENERIC_ATOMIC64) += atomic64.o
 
 obj-$(CONFIG_ATOMIC64_SELFTEST) += atomic64_test.o
 
+obj-$(CONFIG_AVERAGE) += average.o
+
 hostprogs-y	:= gen_crc32table
 clean-files	:= crc32table.h
 
diff --git a/lib/average.c b/lib/average.c
new file mode 100644
index 00000000000..5576c284149
--- /dev/null
+++ b/lib/average.c
@@ -0,0 +1,61 @@
+/*
+ * lib/average.c
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2.  See the file COPYING for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/average.h>
+#include <linux/bug.h>
+#include <linux/log2.h>
+
+/**
+ * DOC: Exponentially Weighted Moving Average (EWMA)
+ *
+ * These are generic functions for calculating Exponentially Weighted Moving
+ * Averages (EWMA). We keep a structure with the EWMA parameters and a scaled
+ * up internal representation of the average value to prevent rounding errors.
+ * The factor for scaling up and the exponential weight (or decay rate) have to
+ * be specified thru the init fuction. The structure should not be accessed
+ * directly but only thru the helper functions.
+ */
+
+/**
+ * ewma_init() - Initialize EWMA parameters
+ * @avg: Average structure
+ * @factor: Factor to use for the scaled up internal value. The maximum value
+ *	of averages can be ULONG_MAX/(factor*weight). For performance reasons
+ *	factor has to be a power of 2.
+ * @weight: Exponential weight, or decay rate. This defines how fast the
+ *	influence of older values decreases. For performance reasons weight has
+ *	to be a power of 2.
+ *
+ * Initialize the EWMA parameters for a given struct ewma @avg.
+ */
+void ewma_init(struct ewma *avg, unsigned long factor, unsigned long weight)
+{
+	WARN_ON(!is_power_of_2(weight) || !is_power_of_2(factor));
+
+	avg->weight = ilog2(weight);
+	avg->factor = ilog2(factor);
+	avg->internal = 0;
+}
+EXPORT_SYMBOL(ewma_init);
+
+/**
+ * ewma_add() - Exponentially weighted moving average (EWMA)
+ * @avg: Average structure
+ * @val: Current value
+ *
+ * Add a sample to the average.
+ */
+struct ewma *ewma_add(struct ewma *avg, unsigned long val)
+{
+	avg->internal = avg->internal  ?
+		(((avg->internal << avg->weight) - avg->internal) +
+			(val << avg->factor)) >> avg->weight :
+		(val << avg->factor);
+	return avg;
+}
+EXPORT_SYMBOL(ewma_add);
diff --git a/lib/debug_locks.c b/lib/debug_locks.c
index 5bf0020b924..b1c17730767 100644
--- a/lib/debug_locks.c
+++ b/lib/debug_locks.c
@@ -8,7 +8,6 @@
  *
  *  Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
  */
-#include <linux/kernel.h>
 #include <linux/rwsem.h>
 #include <linux/mutex.h>
 #include <linux/module.h>
@@ -39,7 +38,6 @@ int debug_locks_off(void)
 {
 	if (__debug_locks_off()) {
 		if (!debug_locks_silent) {
-			oops_in_progress = 1;
 			console_verbose();
 			return 1;
 		}
diff --git a/lib/nlattr.c b/lib/nlattr.c
index c4706eb98d3..00e8a02681a 100644
--- a/lib/nlattr.c
+++ b/lib/nlattr.c
@@ -15,7 +15,7 @@
 #include <linux/types.h>
 #include <net/netlink.h>
 
-static u16 nla_attr_minlen[NLA_TYPE_MAX+1] __read_mostly = {
+static const u16 nla_attr_minlen[NLA_TYPE_MAX+1] = {
 	[NLA_U8]	= sizeof(u8),
 	[NLA_U16]	= sizeof(u16),
 	[NLA_U32]	= sizeof(u32),
@@ -23,7 +23,7 @@ static u16 nla_attr_minlen[NLA_TYPE_MAX+1] __read_mostly = {
 	[NLA_NESTED]	= NLA_HDRLEN,
 };
 
-static int validate_nla(struct nlattr *nla, int maxtype,
+static int validate_nla(const struct nlattr *nla, int maxtype,
 			const struct nla_policy *policy)
 {
 	const struct nla_policy *pt;
@@ -115,10 +115,10 @@ static int validate_nla(struct nlattr *nla, int maxtype,
  *
  * Returns 0 on success or a negative error code.
  */
-int nla_validate(struct nlattr *head, int len, int maxtype,
+int nla_validate(const struct nlattr *head, int len, int maxtype,
 		 const struct nla_policy *policy)
 {
-	struct nlattr *nla;
+	const struct nlattr *nla;
 	int rem, err;
 
 	nla_for_each_attr(nla, head, len, rem) {
@@ -173,10 +173,10 @@ nla_policy_len(const struct nla_policy *p, int n)
  *
  * Returns 0 on success or a negative error code.
  */
-int nla_parse(struct nlattr *tb[], int maxtype, struct nlattr *head, int len,
-	      const struct nla_policy *policy)
+int nla_parse(struct nlattr **tb, int maxtype, const struct nlattr *head,
+	      int len, const struct nla_policy *policy)
 {
-	struct nlattr *nla;
+	const struct nlattr *nla;
 	int rem, err;
 
 	memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1));
@@ -191,7 +191,7 @@ int nla_parse(struct nlattr *tb[], int maxtype, struct nlattr *head, int len,
 					goto errout;
 			}
 
-			tb[type] = nla;
+			tb[type] = (struct nlattr *)nla;
 		}
 	}
 
@@ -212,14 +212,14 @@ errout:
  *
  * Returns the first attribute in the stream matching the specified type.
  */
-struct nlattr *nla_find(struct nlattr *head, int len, int attrtype)
+struct nlattr *nla_find(const struct nlattr *head, int len, int attrtype)
 {
-	struct nlattr *nla;
+	const struct nlattr *nla;
 	int rem;
 
 	nla_for_each_attr(nla, head, len, rem)
 		if (nla_type(nla) == attrtype)
-			return nla;
+			return (struct nlattr *)nla;
 
 	return NULL;
 }
diff --git a/lib/percpu_counter.c b/lib/percpu_counter.c
index 604678d7d06..28f2c33c6b5 100644
--- a/lib/percpu_counter.c
+++ b/lib/percpu_counter.c
@@ -72,18 +72,16 @@ EXPORT_SYMBOL(percpu_counter_set);
 void __percpu_counter_add(struct percpu_counter *fbc, s64 amount, s32 batch)
 {
 	s64 count;
-	s32 *pcount;
 
 	preempt_disable();
-	pcount = this_cpu_ptr(fbc->counters);
-	count = *pcount + amount;
+	count = __this_cpu_read(*fbc->counters) + amount;
 	if (count >= batch || count <= -batch) {
 		spin_lock(&fbc->lock);
 		fbc->count += count;
-		*pcount = 0;
+		__this_cpu_write(*fbc->counters, 0);
 		spin_unlock(&fbc->lock);
 	} else {
-		*pcount = count;
+		__this_cpu_write(*fbc->counters, count);
 	}
 	preempt_enable();
 }
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index 6f412ab4c24..5086bb962b4 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -82,6 +82,16 @@ struct radix_tree_preload {
 };
 static DEFINE_PER_CPU(struct radix_tree_preload, radix_tree_preloads) = { 0, };
 
+static inline void *ptr_to_indirect(void *ptr)
+{
+	return (void *)((unsigned long)ptr | RADIX_TREE_INDIRECT_PTR);
+}
+
+static inline void *indirect_to_ptr(void *ptr)
+{
+	return (void *)((unsigned long)ptr & ~RADIX_TREE_INDIRECT_PTR);
+}
+
 static inline gfp_t root_gfp_mask(struct radix_tree_root *root)
 {
 	return root->gfp_mask & __GFP_BITS_MASK;
@@ -265,7 +275,7 @@ static int radix_tree_extend(struct radix_tree_root *root, unsigned long index)
 			return -ENOMEM;
 
 		/* Increase the height.  */
-		node->slots[0] = radix_tree_indirect_to_ptr(root->rnode);
+		node->slots[0] = indirect_to_ptr(root->rnode);
 
 		/* Propagate the aggregated tag info into the new root */
 		for (tag = 0; tag < RADIX_TREE_MAX_TAGS; tag++) {
@@ -276,7 +286,7 @@ static int radix_tree_extend(struct radix_tree_root *root, unsigned long index)
 		newheight = root->height+1;
 		node->height = newheight;
 		node->count = 1;
-		node = radix_tree_ptr_to_indirect(node);
+		node = ptr_to_indirect(node);
 		rcu_assign_pointer(root->rnode, node);
 		root->height = newheight;
 	} while (height > root->height);
@@ -309,7 +319,7 @@ int radix_tree_insert(struct radix_tree_root *root,
 			return error;
 	}
 
-	slot = radix_tree_indirect_to_ptr(root->rnode);
+	slot = indirect_to_ptr(root->rnode);
 
 	height = root->height;
 	shift = (height-1) * RADIX_TREE_MAP_SHIFT;
@@ -325,8 +335,7 @@ int radix_tree_insert(struct radix_tree_root *root,
 				rcu_assign_pointer(node->slots[offset], slot);
 				node->count++;
 			} else
-				rcu_assign_pointer(root->rnode,
-					radix_tree_ptr_to_indirect(slot));
+				rcu_assign_pointer(root->rnode, ptr_to_indirect(slot));
 		}
 
 		/* Go a level down */
@@ -374,7 +383,7 @@ static void *radix_tree_lookup_element(struct radix_tree_root *root,
 			return NULL;
 		return is_slot ? (void *)&root->rnode : node;
 	}
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	height = node->height;
 	if (index > radix_tree_maxindex(height))
@@ -393,7 +402,7 @@ static void *radix_tree_lookup_element(struct radix_tree_root *root,
 		height--;
 	} while (height > 0);
 
-	return is_slot ? (void *)slot:node;
+	return is_slot ? (void *)slot : indirect_to_ptr(node);
 }
 
 /**
@@ -455,7 +464,7 @@ void *radix_tree_tag_set(struct radix_tree_root *root,
 	height = root->height;
 	BUG_ON(index > radix_tree_maxindex(height));
 
-	slot = radix_tree_indirect_to_ptr(root->rnode);
+	slot = indirect_to_ptr(root->rnode);
 	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
 
 	while (height > 0) {
@@ -509,7 +518,7 @@ void *radix_tree_tag_clear(struct radix_tree_root *root,
 
 	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
 	pathp->node = NULL;
-	slot = radix_tree_indirect_to_ptr(root->rnode);
+	slot = indirect_to_ptr(root->rnode);
 
 	while (height > 0) {
 		int offset;
@@ -579,7 +588,7 @@ int radix_tree_tag_get(struct radix_tree_root *root,
 
 	if (!radix_tree_is_indirect_ptr(node))
 		return (index == 0);
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	height = node->height;
 	if (index > radix_tree_maxindex(height))
@@ -666,7 +675,7 @@ unsigned long radix_tree_range_tag_if_tagged(struct radix_tree_root *root,
 	}
 
 	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
-	slot = radix_tree_indirect_to_ptr(root->rnode);
+	slot = indirect_to_ptr(root->rnode);
 
 	/*
 	 * we fill the path from (root->height - 2) to 0, leaving the index at
@@ -897,7 +906,7 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 		results[0] = node;
 		return 1;
 	}
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	max_index = radix_tree_maxindex(node->height);
 
@@ -916,7 +925,8 @@ radix_tree_gang_lookup(struct radix_tree_root *root, void **results,
 			slot = *(((void ***)results)[ret + i]);
 			if (!slot)
 				continue;
-			results[ret + nr_found] = rcu_dereference_raw(slot);
+			results[ret + nr_found] =
+				indirect_to_ptr(rcu_dereference_raw(slot));
 			nr_found++;
 		}
 		ret += nr_found;
@@ -965,7 +975,7 @@ radix_tree_gang_lookup_slot(struct radix_tree_root *root, void ***results,
 		results[0] = (void **)&root->rnode;
 		return 1;
 	}
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	max_index = radix_tree_maxindex(node->height);
 
@@ -1090,7 +1100,7 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 		results[0] = node;
 		return 1;
 	}
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	max_index = radix_tree_maxindex(node->height);
 
@@ -1109,7 +1119,8 @@ radix_tree_gang_lookup_tag(struct radix_tree_root *root, void **results,
 			slot = *(((void ***)results)[ret + i]);
 			if (!slot)
 				continue;
-			results[ret + nr_found] = rcu_dereference_raw(slot);
+			results[ret + nr_found] =
+				indirect_to_ptr(rcu_dereference_raw(slot));
 			nr_found++;
 		}
 		ret += nr_found;
@@ -1159,7 +1170,7 @@ radix_tree_gang_lookup_tag_slot(struct radix_tree_root *root, void ***results,
 		results[0] = (void **)&root->rnode;
 		return 1;
 	}
-	node = radix_tree_indirect_to_ptr(node);
+	node = indirect_to_ptr(node);
 
 	max_index = radix_tree_maxindex(node->height);
 
@@ -1195,7 +1206,7 @@ static inline void radix_tree_shrink(struct radix_tree_root *root)
 		void *newptr;
 
 		BUG_ON(!radix_tree_is_indirect_ptr(to_free));
-		to_free = radix_tree_indirect_to_ptr(to_free);
+		to_free = indirect_to_ptr(to_free);
 
 		/*
 		 * The candidate node has more than one child, or its child
@@ -1208,16 +1219,39 @@ static inline void radix_tree_shrink(struct radix_tree_root *root)
 
 		/*
 		 * We don't need rcu_assign_pointer(), since we are simply
-		 * moving the node from one part of the tree to another. If
-		 * it was safe to dereference the old pointer to it
+		 * moving the node from one part of the tree to another: if it
+		 * was safe to dereference the old pointer to it
 		 * (to_free->slots[0]), it will be safe to dereference the new
-		 * one (root->rnode).
+		 * one (root->rnode) as far as dependent read barriers go.
 		 */
 		newptr = to_free->slots[0];
 		if (root->height > 1)
-			newptr = radix_tree_ptr_to_indirect(newptr);
+			newptr = ptr_to_indirect(newptr);
 		root->rnode = newptr;
 		root->height--;
+
+		/*
+		 * We have a dilemma here. The node's slot[0] must not be
+		 * NULLed in case there are concurrent lookups expecting to
+		 * find the item. However if this was a bottom-level node,
+		 * then it may be subject to the slot pointer being visible
+		 * to callers dereferencing it. If item corresponding to
+		 * slot[0] is subsequently deleted, these callers would expect
+		 * their slot to become empty sooner or later.
+		 *
+		 * For example, lockless pagecache will look up a slot, deref
+		 * the page pointer, and if the page is 0 refcount it means it
+		 * was concurrently deleted from pagecache so try the deref
+		 * again. Fortunately there is already a requirement for logic
+		 * to retry the entire slot lookup -- the indirect pointer
+		 * problem (replacing direct root node with an indirect pointer
+		 * also results in a stale slot). So tag the slot as indirect
+		 * to force callers to retry.
+		 */
+		if (root->height == 0)
+			*((unsigned long *)&to_free->slots[0]) |=
+						RADIX_TREE_INDIRECT_PTR;
+
 		radix_tree_node_free(to_free);
 	}
 }
@@ -1254,7 +1288,7 @@ void *radix_tree_delete(struct radix_tree_root *root, unsigned long index)
 		root->rnode = NULL;
 		goto out;
 	}
-	slot = radix_tree_indirect_to_ptr(slot);
+	slot = indirect_to_ptr(slot);
 
 	shift = (height - 1) * RADIX_TREE_MAP_SHIFT;
 	pathp->node = NULL;
@@ -1296,8 +1330,7 @@ void *radix_tree_delete(struct radix_tree_root *root, unsigned long index)
 			radix_tree_node_free(to_free);
 
 		if (pathp->node->count) {
-			if (pathp->node ==
-					radix_tree_indirect_to_ptr(root->rnode))
+			if (pathp->node == indirect_to_ptr(root->rnode))
 				radix_tree_shrink(root);
 			goto out;
 		}
diff --git a/lib/timerqueue.c b/lib/timerqueue.c
new file mode 100644
index 00000000000..e3a1050e682
--- /dev/null
+++ b/lib/timerqueue.c
@@ -0,0 +1,107 @@
+/*
+ *  Generic Timer-queue
+ *
+ *  Manages a simple queue of timers, ordered by expiration time.
+ *  Uses rbtrees for quick list adds and expiration.
+ *
+ *  NOTE: All of the following functions need to be serialized
+ *  to avoid races. No locking is done by this libary code.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/timerqueue.h>
+#include <linux/rbtree.h>
+#include <linux/module.h>
+
+/**
+ * timerqueue_add - Adds timer to timerqueue.
+ *
+ * @head: head of timerqueue
+ * @node: timer node to be added
+ *
+ * Adds the timer node to the timerqueue, sorted by the
+ * node's expires value.
+ */
+void timerqueue_add(struct timerqueue_head *head, struct timerqueue_node *node)
+{
+	struct rb_node **p = &head->head.rb_node;
+	struct rb_node *parent = NULL;
+	struct timerqueue_node  *ptr;
+
+	/* Make sure we don't add nodes that are already added */
+	WARN_ON_ONCE(!RB_EMPTY_NODE(&node->node));
+
+	while (*p) {
+		parent = *p;
+		ptr = rb_entry(parent, struct timerqueue_node, node);
+		if (node->expires.tv64 < ptr->expires.tv64)
+			p = &(*p)->rb_left;
+		else
+			p = &(*p)->rb_right;
+	}
+	rb_link_node(&node->node, parent, p);
+	rb_insert_color(&node->node, &head->head);
+
+	if (!head->next || node->expires.tv64 < head->next->expires.tv64)
+		head->next = node;
+}
+EXPORT_SYMBOL_GPL(timerqueue_add);
+
+/**
+ * timerqueue_del - Removes a timer from the timerqueue.
+ *
+ * @head: head of timerqueue
+ * @node: timer node to be removed
+ *
+ * Removes the timer node from the timerqueue.
+ */
+void timerqueue_del(struct timerqueue_head *head, struct timerqueue_node *node)
+{
+	WARN_ON_ONCE(RB_EMPTY_NODE(&node->node));
+
+	/* update next pointer */
+	if (head->next == node) {
+		struct rb_node *rbn = rb_next(&node->node);
+
+		head->next = rbn ?
+			rb_entry(rbn, struct timerqueue_node, node) : NULL;
+	}
+	rb_erase(&node->node, &head->head);
+	RB_CLEAR_NODE(&node->node);
+}
+EXPORT_SYMBOL_GPL(timerqueue_del);
+
+/**
+ * timerqueue_iterate_next - Returns the timer after the provided timer
+ *
+ * @node: Pointer to a timer.
+ *
+ * Provides the timer that is after the given node. This is used, when
+ * necessary, to iterate through the list of timers in a timer list
+ * without modifying the list.
+ */
+struct timerqueue_node *timerqueue_iterate_next(struct timerqueue_node *node)
+{
+	struct rb_node *next;
+
+	if (!node)
+		return NULL;
+	next = rb_next(&node->node);
+	if (!next)
+		return NULL;
+	return container_of(next, struct timerqueue_node, node);
+}
+EXPORT_SYMBOL_GPL(timerqueue_iterate_next);
diff --git a/mm/compaction.c b/mm/compaction.c
index 4d709ee5901..1a8894eadf7 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -279,7 +279,6 @@ static unsigned long isolate_migratepages(struct zone *zone,
 		/* Successfully isolated */
 		del_page_from_lru_list(zone, page, page_lru(page));
 		list_add(&page->lru, migratelist);
-		mem_cgroup_del_lru(page);
 		cc->nr_migratepages++;
 
 		/* Avoid isolating too much */
diff --git a/mm/filemap.c b/mm/filemap.c
index 61ba5e40579..ca389394fa2 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -102,9 +102,6 @@
  *    ->inode_lock		(zap_pte_range->set_page_dirty)
  *    ->private_lock		(zap_pte_range->__set_page_dirty_buffers)
  *
- *  ->task->proc_lock
- *    ->dcache_lock		(proc_pid_lookup)
- *
  *  (code doesn't rely on that order, so you could switch it around)
  *  ->tasklist_lock             (memory_failure, collect_procs_ao)
  *    ->i_mmap_lock
@@ -143,13 +140,18 @@ void __remove_from_page_cache(struct page *page)
 void remove_from_page_cache(struct page *page)
 {
 	struct address_space *mapping = page->mapping;
+	void (*freepage)(struct page *);
 
 	BUG_ON(!PageLocked(page));
 
+	freepage = mapping->a_ops->freepage;
 	spin_lock_irq(&mapping->tree_lock);
 	__remove_from_page_cache(page);
 	spin_unlock_irq(&mapping->tree_lock);
 	mem_cgroup_uncharge_cache_page(page);
+
+	if (freepage)
+		freepage(page);
 }
 EXPORT_SYMBOL(remove_from_page_cache);
 
@@ -644,7 +646,9 @@ repeat:
 	pagep = radix_tree_lookup_slot(&mapping->page_tree, offset);
 	if (pagep) {
 		page = radix_tree_deref_slot(pagep);
-		if (unlikely(!page || page == RADIX_TREE_RETRY))
+		if (unlikely(!page))
+			goto out;
+		if (radix_tree_deref_retry(page))
 			goto repeat;
 
 		if (!page_cache_get_speculative(page))
@@ -660,6 +664,7 @@ repeat:
 			goto repeat;
 		}
 	}
+out:
 	rcu_read_unlock();
 
 	return page;
@@ -777,12 +782,11 @@ repeat:
 		page = radix_tree_deref_slot((void **)pages[i]);
 		if (unlikely(!page))
 			continue;
-		/*
-		 * this can only trigger if nr_found == 1, making livelock
-		 * a non issue.
-		 */
-		if (unlikely(page == RADIX_TREE_RETRY))
+		if (radix_tree_deref_retry(page)) {
+			if (ret)
+				start = pages[ret-1]->index;
 			goto restart;
+		}
 
 		if (!page_cache_get_speculative(page))
 			goto repeat;
@@ -830,11 +834,7 @@ repeat:
 		page = radix_tree_deref_slot((void **)pages[i]);
 		if (unlikely(!page))
 			continue;
-		/*
-		 * this can only trigger if nr_found == 1, making livelock
-		 * a non issue.
-		 */
-		if (unlikely(page == RADIX_TREE_RETRY))
+		if (radix_tree_deref_retry(page))
 			goto restart;
 
 		if (page->mapping == NULL || page->index != index)
@@ -887,11 +887,7 @@ repeat:
 		page = radix_tree_deref_slot((void **)pages[i]);
 		if (unlikely(!page))
 			continue;
-		/*
-		 * this can only trigger if nr_found == 1, making livelock
-		 * a non issue.
-		 */
-		if (unlikely(page == RADIX_TREE_RETRY))
+		if (radix_tree_deref_retry(page))
 			goto restart;
 
 		if (!page_cache_get_speculative(page))
@@ -1029,6 +1025,9 @@ find_page:
 				goto page_not_up_to_date;
 			if (!trylock_page(page))
 				goto page_not_up_to_date;
+			/* Did it get truncated before we got the lock? */
+			if (!page->mapping)
+				goto page_not_up_to_date_locked;
 			if (!mapping->a_ops->is_partially_uptodate(page,
 								desc, offset))
 				goto page_not_up_to_date_locked;
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index c4a3558589a..85855240933 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2738,7 +2738,8 @@ out_page_table_lock:
 		unlock_page(pagecache_page);
 		put_page(pagecache_page);
 	}
-	unlock_page(page);
+	if (page != pagecache_page)
+		unlock_page(page);
 
 out_mutex:
 	mutex_unlock(&hugetlb_instantiation_mutex);
diff --git a/mm/ksm.c b/mm/ksm.c
index 65ab5c7067d..43bc893470b 100644
--- a/mm/ksm.c
+++ b/mm/ksm.c
@@ -1724,8 +1724,13 @@ static int ksm_memory_callback(struct notifier_block *self,
 		/*
 		 * Keep it very simple for now: just lock out ksmd and
 		 * MADV_UNMERGEABLE while any memory is going offline.
+		 * mutex_lock_nested() is necessary because lockdep was alarmed
+		 * that here we take ksm_thread_mutex inside notifier chain
+		 * mutex, and later take notifier chain mutex inside
+		 * ksm_thread_mutex to unlock it.   But that's safe because both
+		 * are inside mem_hotplug_mutex.
 		 */
-		mutex_lock(&ksm_thread_mutex);
+		mutex_lock_nested(&ksm_thread_mutex, SINGLE_DEPTH_NESTING);
 		break;
 
 	case MEM_OFFLINE:
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 9a99cfaf0a1..00bb8a64d02 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -61,7 +61,14 @@ struct mem_cgroup *root_mem_cgroup __read_mostly;
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
 /* Turned on only when memory cgroup is enabled && really_do_swap_account = 1 */
 int do_swap_account __read_mostly;
-static int really_do_swap_account __initdata = 1; /* for remember boot option*/
+
+/* for remember boot option*/
+#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED
+static int really_do_swap_account __initdata = 1;
+#else
+static int really_do_swap_account __initdata = 0;
+#endif
+
 #else
 #define do_swap_account		(0)
 #endif
@@ -278,13 +285,14 @@ enum move_type {
 
 /* "mc" and its members are protected by cgroup_mutex */
 static struct move_charge_struct {
-	spinlock_t	  lock; /* for from, to, moving_task */
+	spinlock_t	  lock; /* for from, to */
 	struct mem_cgroup *from;
 	struct mem_cgroup *to;
 	unsigned long precharge;
 	unsigned long moved_charge;
 	unsigned long moved_swap;
 	struct task_struct *moving_task;	/* a task moving charges */
+	struct mm_struct *mm;
 	wait_queue_head_t waitq;		/* a waitq for other context */
 } mc = {
 	.lock = __SPIN_LOCK_UNLOCKED(mc.lock),
@@ -1917,19 +1925,18 @@ again:
 
 		rcu_read_lock();
 		p = rcu_dereference(mm->owner);
-		VM_BUG_ON(!p);
 		/*
-		 * because we don't have task_lock(), "p" can exit while
-		 * we're here. In that case, "mem" can point to root
-		 * cgroup but never be NULL. (and task_struct itself is freed
-		 * by RCU, cgroup itself is RCU safe.) Then, we have small
-		 * risk here to get wrong cgroup. But such kind of mis-account
-		 * by race always happens because we don't have cgroup_mutex().
-		 * It's overkill and we allow that small race, here.
+		 * Because we don't have task_lock(), "p" can exit.
+		 * In that case, "mem" can point to root or p can be NULL with
+		 * race with swapoff. Then, we have small risk of mis-accouning.
+		 * But such kind of mis-account by race always happens because
+		 * we don't have cgroup_mutex(). It's overkill and we allo that
+		 * small race, here.
+		 * (*) swapoff at el will charge against mm-struct not against
+		 * task-struct. So, mm->owner can be NULL.
 		 */
 		mem = mem_cgroup_from_task(p);
-		VM_BUG_ON(!mem);
-		if (mem_cgroup_is_root(mem)) {
+		if (!mem || mem_cgroup_is_root(mem)) {
 			rcu_read_unlock();
 			goto done;
 		}
@@ -2152,7 +2159,7 @@ static void __mem_cgroup_move_account(struct page_cgroup *pc,
 {
 	VM_BUG_ON(from == to);
 	VM_BUG_ON(PageLRU(pc->page));
-	VM_BUG_ON(!PageCgroupLocked(pc));
+	VM_BUG_ON(!page_is_cgroup_locked(pc));
 	VM_BUG_ON(!PageCgroupUsed(pc));
 	VM_BUG_ON(pc->mem_cgroup != from);
 
@@ -4208,15 +4215,17 @@ static struct mem_cgroup *mem_cgroup_alloc(void)
 
 	memset(mem, 0, size);
 	mem->stat = alloc_percpu(struct mem_cgroup_stat_cpu);
-	if (!mem->stat) {
-		if (size < PAGE_SIZE)
-			kfree(mem);
-		else
-			vfree(mem);
-		mem = NULL;
-	}
+	if (!mem->stat)
+		goto out_free;
 	spin_lock_init(&mem->pcp_counter_lock);
 	return mem;
+
+out_free:
+	if (size < PAGE_SIZE)
+		kfree(mem);
+	else
+		vfree(mem);
+	return NULL;
 }
 
 /*
@@ -4629,7 +4638,7 @@ static unsigned long mem_cgroup_count_precharge(struct mm_struct *mm)
 	unsigned long precharge;
 	struct vm_area_struct *vma;
 
-	down_read(&mm->mmap_sem);
+	/* We've already held the mmap_sem */
 	for (vma = mm->mmap; vma; vma = vma->vm_next) {
 		struct mm_walk mem_cgroup_count_precharge_walk = {
 			.pmd_entry = mem_cgroup_count_precharge_pte_range,
@@ -4641,7 +4650,6 @@ static unsigned long mem_cgroup_count_precharge(struct mm_struct *mm)
 		walk_page_range(vma->vm_start, vma->vm_end,
 					&mem_cgroup_count_precharge_walk);
 	}
-	up_read(&mm->mmap_sem);
 
 	precharge = mc.precharge;
 	mc.precharge = 0;
@@ -4692,11 +4700,16 @@ static void mem_cgroup_clear_mc(void)
 
 		mc.moved_swap = 0;
 	}
+	if (mc.mm) {
+		up_read(&mc.mm->mmap_sem);
+		mmput(mc.mm);
+	}
 	spin_lock(&mc.lock);
 	mc.from = NULL;
 	mc.to = NULL;
-	mc.moving_task = NULL;
 	spin_unlock(&mc.lock);
+	mc.moving_task = NULL;
+	mc.mm = NULL;
 	mem_cgroup_end_move(from);
 	memcg_oom_recover(from);
 	memcg_oom_recover(to);
@@ -4722,12 +4735,21 @@ static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
 			return 0;
 		/* We move charges only when we move a owner of the mm */
 		if (mm->owner == p) {
+			/*
+			 * We do all the move charge works under one mmap_sem to
+			 * avoid deadlock with down_write(&mmap_sem)
+			 * -> try_charge() -> if (mc.moving_task) -> sleep.
+			 */
+			down_read(&mm->mmap_sem);
+
 			VM_BUG_ON(mc.from);
 			VM_BUG_ON(mc.to);
 			VM_BUG_ON(mc.precharge);
 			VM_BUG_ON(mc.moved_charge);
 			VM_BUG_ON(mc.moved_swap);
 			VM_BUG_ON(mc.moving_task);
+			VM_BUG_ON(mc.mm);
+
 			mem_cgroup_start_move(from);
 			spin_lock(&mc.lock);
 			mc.from = from;
@@ -4735,14 +4757,16 @@ static int mem_cgroup_can_attach(struct cgroup_subsys *ss,
 			mc.precharge = 0;
 			mc.moved_charge = 0;
 			mc.moved_swap = 0;
-			mc.moving_task = current;
 			spin_unlock(&mc.lock);
+			mc.moving_task = current;
+			mc.mm = mm;
 
 			ret = mem_cgroup_precharge_mc(mm);
 			if (ret)
 				mem_cgroup_clear_mc();
-		}
-		mmput(mm);
+			/* We call up_read() and mmput() in clear_mc(). */
+		} else
+			mmput(mm);
 	}
 	return ret;
 }
@@ -4830,7 +4854,7 @@ static void mem_cgroup_move_charge(struct mm_struct *mm)
 	struct vm_area_struct *vma;
 
 	lru_add_drain_all();
-	down_read(&mm->mmap_sem);
+	/* We've already held the mmap_sem */
 	for (vma = mm->mmap; vma; vma = vma->vm_next) {
 		int ret;
 		struct mm_walk mem_cgroup_move_charge_walk = {
@@ -4849,7 +4873,6 @@ static void mem_cgroup_move_charge(struct mm_struct *mm)
 			 */
 			break;
 	}
-	up_read(&mm->mmap_sem);
 }
 
 static void mem_cgroup_move_task(struct cgroup_subsys *ss,
@@ -4858,17 +4881,11 @@ static void mem_cgroup_move_task(struct cgroup_subsys *ss,
 				struct task_struct *p,
 				bool threadgroup)
 {
-	struct mm_struct *mm;
-
-	if (!mc.to)
+	if (!mc.mm)
 		/* no need to move charge */
 		return;
 
-	mm = get_task_mm(p);
-	if (mm) {
-		mem_cgroup_move_charge(mm);
-		mmput(mm);
-	}
+	mem_cgroup_move_charge(mc.mm);
 	mem_cgroup_clear_mc();
 }
 #else	/* !CONFIG_MMU */
@@ -4909,10 +4926,20 @@ struct cgroup_subsys mem_cgroup_subsys = {
 };
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
+static int __init enable_swap_account(char *s)
+{
+	/* consider enabled if no parameter or 1 is given */
+	if (!s || !strcmp(s, "1"))
+		really_do_swap_account = 1;
+	else if (!strcmp(s, "0"))
+		really_do_swap_account = 0;
+	return 1;
+}
+__setup("swapaccount", enable_swap_account);
 
 static int __init disable_swap_account(char *s)
 {
-	really_do_swap_account = 0;
+	enable_swap_account("0");
 	return 1;
 }
 __setup("noswapaccount", disable_swap_account);
diff --git a/mm/memory-failure.c b/mm/memory-failure.c
index 124324134ff..46ab2c044b0 100644
--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -51,6 +51,7 @@
 #include <linux/slab.h>
 #include <linux/swapops.h>
 #include <linux/hugetlb.h>
+#include <linux/memory_hotplug.h>
 #include "internal.h"
 
 int sysctl_memory_failure_early_kill __read_mostly = 0;
@@ -1230,11 +1231,10 @@ static int get_any_page(struct page *p, unsigned long pfn, int flags)
 		return 1;
 
 	/*
-	 * The lock_system_sleep prevents a race with memory hotplug,
-	 * because the isolation assumes there's only a single user.
+	 * The lock_memory_hotplug prevents a race with memory hotplug.
 	 * This is a big hammer, a better would be nicer.
 	 */
-	lock_system_sleep();
+	lock_memory_hotplug();
 
 	/*
 	 * Isolate the page, so that it doesn't get reallocated if it
@@ -1264,7 +1264,7 @@ static int get_any_page(struct page *p, unsigned long pfn, int flags)
 		ret = 1;
 	}
 	unset_migratetype_isolate(p);
-	unlock_system_sleep();
+	unlock_memory_hotplug();
 	return ret;
 }
 
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 9260314a221..2c6523af547 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -34,6 +34,23 @@
 
 #include "internal.h"
 
+DEFINE_MUTEX(mem_hotplug_mutex);
+
+void lock_memory_hotplug(void)
+{
+	mutex_lock(&mem_hotplug_mutex);
+
+	/* for exclusive hibernation if CONFIG_HIBERNATION=y */
+	lock_system_sleep();
+}
+
+void unlock_memory_hotplug(void)
+{
+	unlock_system_sleep();
+	mutex_unlock(&mem_hotplug_mutex);
+}
+
+
 /* add this memory to iomem resource */
 static struct resource *register_memory_resource(u64 start, u64 size)
 {
@@ -493,7 +510,7 @@ int mem_online_node(int nid)
 	pg_data_t	*pgdat;
 	int	ret;
 
-	lock_system_sleep();
+	lock_memory_hotplug();
 	pgdat = hotadd_new_pgdat(nid, 0);
 	if (pgdat) {
 		ret = -ENOMEM;
@@ -504,7 +521,7 @@ int mem_online_node(int nid)
 	BUG_ON(ret);
 
 out:
-	unlock_system_sleep();
+	unlock_memory_hotplug();
 	return ret;
 }
 
@@ -516,7 +533,7 @@ int __ref add_memory(int nid, u64 start, u64 size)
 	struct resource *res;
 	int ret;
 
-	lock_system_sleep();
+	lock_memory_hotplug();
 
 	res = register_memory_resource(start, size);
 	ret = -EEXIST;
@@ -563,7 +580,7 @@ error:
 		release_memory_resource(res);
 
 out:
-	unlock_system_sleep();
+	unlock_memory_hotplug();
 	return ret;
 }
 EXPORT_SYMBOL_GPL(add_memory);
@@ -791,7 +808,7 @@ static int offline_pages(unsigned long start_pfn,
 	if (!test_pages_in_a_zone(start_pfn, end_pfn))
 		return -EINVAL;
 
-	lock_system_sleep();
+	lock_memory_hotplug();
 
 	zone = page_zone(pfn_to_page(start_pfn));
 	node = zone_to_nid(zone);
@@ -880,7 +897,7 @@ repeat:
 	writeback_set_ratelimit();
 
 	memory_notify(MEM_OFFLINE, &arg);
-	unlock_system_sleep();
+	unlock_memory_hotplug();
 	return 0;
 
 failed_removal:
@@ -891,7 +908,7 @@ failed_removal:
 	undo_isolate_page_range(start_pfn, end_pfn);
 
 out:
-	unlock_system_sleep();
+	unlock_memory_hotplug();
 	return ret;
 }
 
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 4a57f135b76..11ff260fb28 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1307,15 +1307,18 @@ SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode,
 		goto out;
 
 	/* Find the mm_struct */
+	rcu_read_lock();
 	read_lock(&tasklist_lock);
 	task = pid ? find_task_by_vpid(pid) : current;
 	if (!task) {
 		read_unlock(&tasklist_lock);
+		rcu_read_unlock();
 		err = -ESRCH;
 		goto out;
 	}
 	mm = get_task_mm(task);
 	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 
 	err = -EINVAL;
 	if (!mm)
diff --git a/mm/migrate.c b/mm/migrate.c
index fe5a3c6a542..6ae8a66a704 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -35,6 +35,8 @@
 #include <linux/hugetlb.h>
 #include <linux/gfp.h>
 
+#include <asm/tlbflush.h>
+
 #include "internal.h"
 
 #define lru_to_page(_head) (list_entry((_head)->prev, struct page, lru))
diff --git a/mm/mmap.c b/mm/mmap.c
index b179abb1474..50a4aa0255a 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2462,6 +2462,7 @@ int install_special_mapping(struct mm_struct *mm,
 			    unsigned long addr, unsigned long len,
 			    unsigned long vm_flags, struct page **pages)
 {
+	int ret;
 	struct vm_area_struct *vma;
 
 	vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
@@ -2479,16 +2480,23 @@ int install_special_mapping(struct mm_struct *mm,
 	vma->vm_ops = &special_mapping_vmops;
 	vma->vm_private_data = pages;
 
-	if (unlikely(insert_vm_struct(mm, vma))) {
-		kmem_cache_free(vm_area_cachep, vma);
-		return -ENOMEM;
-	}
+	ret = security_file_mmap(NULL, 0, 0, 0, vma->vm_start, 1);
+	if (ret)
+		goto out;
+
+	ret = insert_vm_struct(mm, vma);
+	if (ret)
+		goto out;
 
 	mm->total_vm += len >> PAGE_SHIFT;
 
 	perf_event_mmap(vma);
 
 	return 0;
+
+out:
+	kmem_cache_free(vm_area_cachep, vma);
+	return ret;
 }
 
 static DEFINE_MUTEX(mm_all_locks_mutex);
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 2d1bf7cf885..4c513387309 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -211,6 +211,7 @@ success:
 	mmu_notifier_invalidate_range_end(mm, start, end);
 	vm_stat_account(mm, oldflags, vma->vm_file, -nrpages);
 	vm_stat_account(mm, newflags, vma->vm_file, nrpages);
+	perf_event_mmap(vma);
 	return 0;
 
 fail:
@@ -299,7 +300,6 @@ SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len,
 		error = mprotect_fixup(vma, &prev, nstart, tmp, newflags);
 		if (error)
 			goto out;
-		perf_event_mmap(vma);
 		nstart = tmp;
 
 		if (nstart < prev->vm_end)
diff --git a/mm/nommu.c b/mm/nommu.c
index 3613517c759..ef4045d010d 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -10,7 +10,7 @@
  *  Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com>
  *  Copyright (c) 2000-2001 D Jeff Dionne <jeff@uClinux.org>
  *  Copyright (c) 2002      Greg Ungerer <gerg@snapgear.com>
- *  Copyright (c) 2007-2009 Paul Mundt <lethal@linux-sh.org>
+ *  Copyright (c) 2007-2010 Paul Mundt <lethal@linux-sh.org>
  */
 
 #include <linux/module.h>
@@ -328,6 +328,7 @@ void *vmalloc_node(unsigned long size, int node)
 {
 	return vmalloc(size);
 }
+EXPORT_SYMBOL(vmalloc_node);
 
 /**
  * vzalloc_node - allocate memory on a specific node with zero fill
@@ -440,6 +441,31 @@ void  __attribute__((weak)) vmalloc_sync_all(void)
 {
 }
 
+/**
+ *	alloc_vm_area - allocate a range of kernel address space
+ *	@size:		size of the area
+ *
+ *	Returns:	NULL on failure, vm_struct on success
+ *
+ *	This function reserves a range of kernel address space, and
+ *	allocates pagetables to map that range.  No actual mappings
+ *	are created.  If the kernel address space is not shared
+ *	between processes, it syncs the pagetable across all
+ *	processes.
+ */
+struct vm_struct *alloc_vm_area(size_t size)
+{
+	BUG();
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(alloc_vm_area);
+
+void free_vm_area(struct vm_struct *area)
+{
+	BUG();
+}
+EXPORT_SYMBOL_GPL(free_vm_area);
+
 int vm_insert_page(struct vm_area_struct *vma, unsigned long addr,
 		   struct page *page)
 {
@@ -1717,6 +1743,7 @@ void exit_mmap(struct mm_struct *mm)
 		mm->mmap = vma->vm_next;
 		delete_vma_from_mm(vma);
 		delete_vma(mm, vma);
+		cond_resched();
 	}
 
 	kleave("");
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index b840afa8976..b4edfe7ce06 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -563,7 +563,7 @@ static void balance_dirty_pages(struct address_space *mapping,
 				break;		/* We've done our duty */
 		}
 		trace_wbc_balance_dirty_wait(&wbc, bdi);
-		__set_current_state(TASK_INTERRUPTIBLE);
+		__set_current_state(TASK_UNINTERRUPTIBLE);
 		io_schedule_timeout(pause);
 
 		/*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 07a654486f7..ff7e1587239 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -104,19 +104,24 @@ gfp_t gfp_allowed_mask __read_mostly = GFP_BOOT_MASK;
  * only be modified with pm_mutex held, unless the suspend/hibernate code is
  * guaranteed not to run in parallel with that modification).
  */
-void set_gfp_allowed_mask(gfp_t mask)
+
+static gfp_t saved_gfp_mask;
+
+void pm_restore_gfp_mask(void)
 {
 	WARN_ON(!mutex_is_locked(&pm_mutex));
-	gfp_allowed_mask = mask;
+	if (saved_gfp_mask) {
+		gfp_allowed_mask = saved_gfp_mask;
+		saved_gfp_mask = 0;
+	}
 }
 
-gfp_t clear_gfp_allowed_mask(gfp_t mask)
+void pm_restrict_gfp_mask(void)
 {
-	gfp_t ret = gfp_allowed_mask;
-
 	WARN_ON(!mutex_is_locked(&pm_mutex));
-	gfp_allowed_mask &= ~mask;
-	return ret;
+	WARN_ON(saved_gfp_mask);
+	saved_gfp_mask = gfp_allowed_mask;
+	gfp_allowed_mask &= ~GFP_IOFS;
 }
 #endif /* CONFIG_PM_SLEEP */
 
@@ -3008,14 +3013,6 @@ static __init_refok int __build_all_zonelists(void *data)
 		build_zonelist_cache(pgdat);
 	}
 
-#ifdef CONFIG_MEMORY_HOTPLUG
-	/* Setup real pagesets for the new zone */
-	if (data) {
-		struct zone *zone = data;
-		setup_zone_pageset(zone);
-	}
-#endif
-
 	/*
 	 * Initialize the boot_pagesets that are going to be used
 	 * for bootstrapping processors. The real pagesets for
@@ -3064,7 +3061,11 @@ void build_all_zonelists(void *data)
 	} else {
 		/* we have to stop all cpus to guarantee there is no user
 		   of zonelist */
-		stop_machine(__build_all_zonelists, data, NULL);
+#ifdef CONFIG_MEMORY_HOTPLUG
+		if (data)
+			setup_zone_pageset((struct zone *)data);
+#endif
+		stop_machine(__build_all_zonelists, NULL, NULL);
 		/* cpuset refresh routine should be here */
 	}
 	vm_total_pages = nr_free_pagecache_pages();
diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index 8b1a2ce21ee..38cc58b8b2b 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -139,7 +139,6 @@ int walk_page_range(unsigned long addr, unsigned long end,
 	pgd_t *pgd;
 	unsigned long next;
 	int err = 0;
-	struct vm_area_struct *vma;
 
 	if (addr >= end)
 		return err;
@@ -149,15 +148,17 @@ int walk_page_range(unsigned long addr, unsigned long end,
 
 	pgd = pgd_offset(walk->mm, addr);
 	do {
+		struct vm_area_struct *uninitialized_var(vma);
+
 		next = pgd_addr_end(addr, end);
 
+#ifdef CONFIG_HUGETLB_PAGE
 		/*
 		 * handle hugetlb vma individually because pagetable walk for
 		 * the hugetlb page is dependent on the architecture and
 		 * we can't handled it in the same manner as non-huge pages.
 		 */
 		vma = find_vma(walk->mm, addr);
-#ifdef CONFIG_HUGETLB_PAGE
 		if (vma && is_vm_hugetlb_page(vma)) {
 			if (vma->vm_end < next)
 				next = vma->vm_end;
diff --git a/mm/percpu.c b/mm/percpu.c
index efe816856a9..3dd4984bdef 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -293,12 +293,8 @@ static void *pcpu_mem_alloc(size_t size)
 
 	if (size <= PAGE_SIZE)
 		return kzalloc(size, GFP_KERNEL);
-	else {
-		void *ptr = vmalloc(size);
-		if (ptr)
-			memset(ptr, 0, size);
-		return ptr;
-	}
+	else
+		return vzalloc(size);
 }
 
 /**
@@ -1268,7 +1264,7 @@ int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai,
 
 	/* we're done parsing the input, undefine BUG macro and dump config */
 #undef PCPU_SETUP_BUG_ON
-	pcpu_dump_alloc_info(KERN_INFO, ai);
+	pcpu_dump_alloc_info(KERN_DEBUG, ai);
 
 	pcpu_nr_groups = ai->nr_groups;
 	pcpu_group_offsets = group_offsets;
diff --git a/mm/shmem.c b/mm/shmem.c
index 47fdeeb9d63..5ee67c99060 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2415,13 +2415,20 @@ static struct inode *shmem_alloc_inode(struct super_block *sb)
 	return &p->vfs_inode;
 }
 
+static void shmem_i_callback(struct rcu_head *head)
+{
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
+	kmem_cache_free(shmem_inode_cachep, SHMEM_I(inode));
+}
+
 static void shmem_destroy_inode(struct inode *inode)
 {
 	if ((inode->i_mode & S_IFMT) == S_IFREG) {
 		/* only struct inode is valid if it's an inline symlink */
 		mpol_free_shared_policy(&SHMEM_I(inode)->policy);
 	}
-	kmem_cache_free(shmem_inode_cachep, SHMEM_I(inode));
+	call_rcu(&inode->i_rcu, shmem_i_callback);
 }
 
 static void init_once(void *foo)
diff --git a/mm/slab.c b/mm/slab.c
index b1e40dafbab..e9f92987954 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -829,12 +829,12 @@ static void init_reap_node(int cpu)
 
 static void next_reap_node(void)
 {
-	int node = __get_cpu_var(slab_reap_node);
+	int node = __this_cpu_read(slab_reap_node);
 
 	node = next_node(node, node_online_map);
 	if (unlikely(node >= MAX_NUMNODES))
 		node = first_node(node_online_map);
-	__get_cpu_var(slab_reap_node) = node;
+	__this_cpu_write(slab_reap_node, node);
 }
 
 #else
@@ -1012,7 +1012,7 @@ static void __drain_alien_cache(struct kmem_cache *cachep,
  */
 static void reap_alien(struct kmem_cache *cachep, struct kmem_list3 *l3)
 {
-	int node = __get_cpu_var(slab_reap_node);
+	int node = __this_cpu_read(slab_reap_node);
 
 	if (l3->alien) {
 		struct array_cache *ac = l3->alien[node];
@@ -1293,7 +1293,7 @@ static int __cpuinit cpuup_callback(struct notifier_block *nfb,
 		 * anything expensive but will only modify reap_work
 		 * and reschedule the timer.
 		*/
-		cancel_rearming_delayed_work(&per_cpu(slab_reap_work, cpu));
+		cancel_delayed_work_sync(&per_cpu(slab_reap_work, cpu));
 		/* Now the cache_reaper is guaranteed to be not running. */
 		per_cpu(slab_reap_work, cpu).work.func = NULL;
   		break;
@@ -2781,7 +2781,7 @@ static void slab_put_obj(struct kmem_cache *cachep, struct slab *slabp,
 /*
  * Map pages beginning at addr to the given cache and slab. This is required
  * for the slab allocator to be able to lookup the cache and slab of a
- * virtual address for kfree, ksize, kmem_ptr_validate, and slab debugging.
+ * virtual address for kfree, ksize, and slab debugging.
  */
 static void slab_map_pages(struct kmem_cache *cache, struct slab *slab,
 			   void *addr)
@@ -3660,36 +3660,6 @@ void *kmem_cache_alloc_notrace(struct kmem_cache *cachep, gfp_t flags)
 EXPORT_SYMBOL(kmem_cache_alloc_notrace);
 #endif
 
-/**
- * kmem_ptr_validate - check if an untrusted pointer might be a slab entry.
- * @cachep: the cache we're checking against
- * @ptr: pointer to validate
- *
- * This verifies that the untrusted pointer looks sane;
- * it is _not_ a guarantee that the pointer is actually
- * part of the slab cache in question, but it at least
- * validates that the pointer can be dereferenced and
- * looks half-way sane.
- *
- * Currently only used for dentry validation.
- */
-int kmem_ptr_validate(struct kmem_cache *cachep, const void *ptr)
-{
-	unsigned long size = cachep->buffer_size;
-	struct page *page;
-
-	if (unlikely(!kern_ptr_validate(ptr, size)))
-		goto out;
-	page = virt_to_page(ptr);
-	if (unlikely(!PageSlab(page)))
-		goto out;
-	if (unlikely(page_get_cache(page) != cachep))
-		goto out;
-	return 1;
-out:
-	return 0;
-}
-
 #ifdef CONFIG_NUMA
 void *kmem_cache_alloc_node(struct kmem_cache *cachep, gfp_t flags, int nodeid)
 {
diff --git a/mm/slob.c b/mm/slob.c
index 617b6d6c42c..3588eaaef72 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -678,11 +678,6 @@ int kmem_cache_shrink(struct kmem_cache *d)
 }
 EXPORT_SYMBOL(kmem_cache_shrink);
 
-int kmem_ptr_validate(struct kmem_cache *a, const void *b)
-{
-	return 0;
-}
-
 static unsigned int slob_ready __read_mostly;
 
 int slab_is_available(void)
diff --git a/mm/slub.c b/mm/slub.c
index 8fd5401bb07..a2fe1727ed8 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1917,17 +1917,6 @@ void kmem_cache_free(struct kmem_cache *s, void *x)
 }
 EXPORT_SYMBOL(kmem_cache_free);
 
-/* Figure out on which slab page the object resides */
-static struct page *get_object_page(const void *x)
-{
-	struct page *page = virt_to_head_page(x);
-
-	if (!PageSlab(page))
-		return NULL;
-
-	return page;
-}
-
 /*
  * Object placement in a slab is made very easy because we always start at
  * offset 0. If we tune the size of the object to the alignment then we can
@@ -2386,35 +2375,6 @@ error:
 }
 
 /*
- * Check if a given pointer is valid
- */
-int kmem_ptr_validate(struct kmem_cache *s, const void *object)
-{
-	struct page *page;
-
-	if (!kern_ptr_validate(object, s->size))
-		return 0;
-
-	page = get_object_page(object);
-
-	if (!page || s != page->slab)
-		/* No slab or wrong slab */
-		return 0;
-
-	if (!check_valid_pointer(s, page, object))
-		return 0;
-
-	/*
-	 * We could also check if the object is on the slabs freelist.
-	 * But this would be too expensive and it seems that the main
-	 * purpose of kmem_ptr_valid() is to check if the object belongs
-	 * to a certain slab.
-	 */
-	return 1;
-}
-EXPORT_SYMBOL(kmem_ptr_validate);
-
-/*
  * Determine the size of a slab object
  */
 unsigned int kmem_cache_size(struct kmem_cache *s)
@@ -3273,9 +3233,9 @@ struct kmem_cache *kmem_cache_create(const char *name, size_t size,
 		kfree(n);
 		kfree(s);
 	}
+err:
 	up_write(&slub_lock);
 
-err:
 	if (flags & SLAB_PANIC)
 		panic("Cannot create slabcache %s\n", name);
 	else
@@ -3401,13 +3361,13 @@ static int validate_slab(struct kmem_cache *s, struct page *page,
 
 	for_each_free_object(p, s, page->freelist) {
 		set_bit(slab_index(p, s, addr), map);
-		if (!check_object(s, page, p, 0))
+		if (!check_object(s, page, p, SLUB_RED_INACTIVE))
 			return 0;
 	}
 
 	for_each_object(p, s, addr, page->objects)
 		if (!test_bit(slab_index(p, s, addr), map))
-			if (!check_object(s, page, p, 1))
+			if (!check_object(s, page, p, SLUB_RED_ACTIVE))
 				return 0;
 	return 1;
 }
@@ -3862,6 +3822,7 @@ static ssize_t show_slab_objects(struct kmem_cache *s,
 			x += sprintf(buf + x, " N%d=%lu",
 					node, nodes[node]);
 #endif
+	up_read(&slub_lock);
 	kfree(nodes);
 	return x + sprintf(buf + x, "\n");
 }
diff --git a/mm/truncate.c b/mm/truncate.c
index ba887bff48c..3c2d5ddfa0d 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -390,6 +390,10 @@ invalidate_complete_page2(struct address_space *mapping, struct page *page)
 	__remove_from_page_cache(page);
 	spin_unlock_irq(&mapping->tree_lock);
 	mem_cgroup_uncharge_cache_page(page);
+
+	if (mapping->a_ops->freepage)
+		mapping->a_ops->freepage(page);
+
 	page_cache_release(page);	/* pagecache ref */
 	return 1;
 failed:
diff --git a/mm/util.c b/mm/util.c
index 73dac81e9f7..f126975ef23 100644
--- a/mm/util.c
+++ b/mm/util.c
@@ -186,27 +186,6 @@ void kzfree(const void *p)
 }
 EXPORT_SYMBOL(kzfree);
 
-int kern_ptr_validate(const void *ptr, unsigned long size)
-{
-	unsigned long addr = (unsigned long)ptr;
-	unsigned long min_addr = PAGE_OFFSET;
-	unsigned long align_mask = sizeof(void *) - 1;
-
-	if (unlikely(addr < min_addr))
-		goto out;
-	if (unlikely(addr > (unsigned long)high_memory - size))
-		goto out;
-	if (unlikely(addr & align_mask))
-		goto out;
-	if (unlikely(!kern_addr_valid(addr)))
-		goto out;
-	if (unlikely(!kern_addr_valid(addr + size - 1)))
-		goto out;
-	return 1;
-out:
-	return 0;
-}
-
 /*
  * strndup_user - duplicate an existing string from user space
  * @s: The string to duplicate
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index a3d66b3dc5c..eb5cc7d00c5 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -31,8 +31,6 @@
 #include <asm/tlbflush.h>
 #include <asm/shmparam.h>
 
-bool vmap_lazy_unmap __read_mostly = true;
-
 /*** Page table manipulation functions ***/
 
 static void vunmap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end)
@@ -503,9 +501,6 @@ static unsigned long lazy_max_pages(void)
 {
 	unsigned int log;
 
-	if (!vmap_lazy_unmap)
-		return 0;
-
 	log = fls(num_online_cpus());
 
 	return log * (32UL * 1024 * 1024 / PAGE_SIZE);
@@ -566,7 +561,6 @@ static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end,
 			if (va->va_end > *end)
 				*end = va->va_end;
 			nr += (va->va_end - va->va_start) >> PAGE_SHIFT;
-			unmap_vmap_area(va);
 			list_add_tail(&va->purge_list, &valist);
 			va->flags |= VM_LAZY_FREEING;
 			va->flags &= ~VM_LAZY_FREE;
@@ -611,10 +605,11 @@ static void purge_vmap_area_lazy(void)
 }
 
 /*
- * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
- * called for the correct range previously.
+ * Free a vmap area, caller ensuring that the area has been unmapped
+ * and flush_cache_vunmap had been called for the correct range
+ * previously.
  */
-static void free_unmap_vmap_area_noflush(struct vmap_area *va)
+static void free_vmap_area_noflush(struct vmap_area *va)
 {
 	va->flags |= VM_LAZY_FREE;
 	atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr);
@@ -623,6 +618,16 @@ static void free_unmap_vmap_area_noflush(struct vmap_area *va)
 }
 
 /*
+ * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
+ * called for the correct range previously.
+ */
+static void free_unmap_vmap_area_noflush(struct vmap_area *va)
+{
+	unmap_vmap_area(va);
+	free_vmap_area_noflush(va);
+}
+
+/*
  * Free and unmap a vmap area
  */
 static void free_unmap_vmap_area(struct vmap_area *va)
@@ -798,7 +803,7 @@ static void free_vmap_block(struct vmap_block *vb)
 	spin_unlock(&vmap_block_tree_lock);
 	BUG_ON(tmp != vb);
 
-	free_unmap_vmap_area_noflush(vb->va);
+	free_vmap_area_noflush(vb->va);
 	call_rcu(&vb->rcu_head, rcu_free_vb);
 }
 
@@ -936,6 +941,8 @@ static void vb_free(const void *addr, unsigned long size)
 	rcu_read_unlock();
 	BUG_ON(!vb);
 
+	vunmap_page_range((unsigned long)addr, (unsigned long)addr + size);
+
 	spin_lock(&vb->lock);
 	BUG_ON(bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order));
 
@@ -988,7 +995,6 @@ void vm_unmap_aliases(void)
 
 				s = vb->va->va_start + (i << PAGE_SHIFT);
 				e = vb->va->va_start + (j << PAGE_SHIFT);
-				vunmap_page_range(s, e);
 				flush = 1;
 
 				if (s < start)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index b8a6fdc2131..9ca587c6927 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -494,9 +494,16 @@ static int __remove_mapping(struct address_space *mapping, struct page *page)
 		spin_unlock_irq(&mapping->tree_lock);
 		swapcache_free(swap, page);
 	} else {
+		void (*freepage)(struct page *);
+
+		freepage = mapping->a_ops->freepage;
+
 		__remove_from_page_cache(page);
 		spin_unlock_irq(&mapping->tree_lock);
 		mem_cgroup_uncharge_cache_page(page);
+
+		if (freepage != NULL)
+			freepage(page);
 	}
 
 	return 1;
@@ -913,7 +920,7 @@ keep_lumpy:
 	 * back off and wait for congestion to clear because further reclaim
 	 * will encounter the same problem
 	 */
-	if (nr_dirty == nr_congested)
+	if (nr_dirty == nr_congested && nr_dirty != 0)
 		zone_set_flag(zone, ZONE_CONGESTED);
 
 	free_page_list(&free_pages);
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 42eac4d3321..312d728976f 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -167,36 +167,24 @@ static void refresh_zone_stat_thresholds(void)
 void __mod_zone_page_state(struct zone *zone, enum zone_stat_item item,
 				int delta)
 {
-	struct per_cpu_pageset *pcp = this_cpu_ptr(zone->pageset);
-
-	s8 *p = pcp->vm_stat_diff + item;
+	struct per_cpu_pageset __percpu *pcp = zone->pageset;
+	s8 __percpu *p = pcp->vm_stat_diff + item;
 	long x;
+	long t;
+
+	x = delta + __this_cpu_read(*p);
 
-	x = delta + *p;
+	t = __this_cpu_read(pcp->stat_threshold);
 
-	if (unlikely(x > pcp->stat_threshold || x < -pcp->stat_threshold)) {
+	if (unlikely(x > t || x < -t)) {
 		zone_page_state_add(x, zone, item);
 		x = 0;
 	}
-	*p = x;
+	__this_cpu_write(*p, x);
 }
 EXPORT_SYMBOL(__mod_zone_page_state);
 
 /*
- * For an unknown interrupt state
- */
-void mod_zone_page_state(struct zone *zone, enum zone_stat_item item,
-					int delta)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	__mod_zone_page_state(zone, item, delta);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(mod_zone_page_state);
-
-/*
  * Optimized increment and decrement functions.
  *
  * These are only for a single page and therefore can take a struct page *
@@ -221,16 +209,17 @@ EXPORT_SYMBOL(mod_zone_page_state);
  */
 void __inc_zone_state(struct zone *zone, enum zone_stat_item item)
 {
-	struct per_cpu_pageset *pcp = this_cpu_ptr(zone->pageset);
-	s8 *p = pcp->vm_stat_diff + item;
-
-	(*p)++;
+	struct per_cpu_pageset __percpu *pcp = zone->pageset;
+	s8 __percpu *p = pcp->vm_stat_diff + item;
+	s8 v, t;
 
-	if (unlikely(*p > pcp->stat_threshold)) {
-		int overstep = pcp->stat_threshold / 2;
+	v = __this_cpu_inc_return(*p);
+	t = __this_cpu_read(pcp->stat_threshold);
+	if (unlikely(v > t)) {
+		s8 overstep = t >> 1;
 
-		zone_page_state_add(*p + overstep, zone, item);
-		*p = -overstep;
+		zone_page_state_add(v + overstep, zone, item);
+		__this_cpu_write(*p, -overstep);
 	}
 }
 
@@ -242,16 +231,17 @@ EXPORT_SYMBOL(__inc_zone_page_state);
 
 void __dec_zone_state(struct zone *zone, enum zone_stat_item item)
 {
-	struct per_cpu_pageset *pcp = this_cpu_ptr(zone->pageset);
-	s8 *p = pcp->vm_stat_diff + item;
+	struct per_cpu_pageset __percpu *pcp = zone->pageset;
+	s8 __percpu *p = pcp->vm_stat_diff + item;
+	s8 v, t;
 
-	(*p)--;
+	v = __this_cpu_dec_return(*p);
+	t = __this_cpu_read(pcp->stat_threshold);
+	if (unlikely(v < - t)) {
+		s8 overstep = t >> 1;
 
-	if (unlikely(*p < - pcp->stat_threshold)) {
-		int overstep = pcp->stat_threshold / 2;
-
-		zone_page_state_add(*p - overstep, zone, item);
-		*p = overstep;
+		zone_page_state_add(v - overstep, zone, item);
+		__this_cpu_write(*p, overstep);
 	}
 }
 
@@ -261,6 +251,92 @@ void __dec_zone_page_state(struct page *page, enum zone_stat_item item)
 }
 EXPORT_SYMBOL(__dec_zone_page_state);
 
+#ifdef CONFIG_CMPXCHG_LOCAL
+/*
+ * If we have cmpxchg_local support then we do not need to incur the overhead
+ * that comes with local_irq_save/restore if we use this_cpu_cmpxchg.
+ *
+ * mod_state() modifies the zone counter state through atomic per cpu
+ * operations.
+ *
+ * Overstep mode specifies how overstep should handled:
+ *     0       No overstepping
+ *     1       Overstepping half of threshold
+ *     -1      Overstepping minus half of threshold
+*/
+static inline void mod_state(struct zone *zone,
+       enum zone_stat_item item, int delta, int overstep_mode)
+{
+	struct per_cpu_pageset __percpu *pcp = zone->pageset;
+	s8 __percpu *p = pcp->vm_stat_diff + item;
+	long o, n, t, z;
+
+	do {
+		z = 0;  /* overflow to zone counters */
+
+		/*
+		 * The fetching of the stat_threshold is racy. We may apply
+		 * a counter threshold to the wrong the cpu if we get
+		 * rescheduled while executing here. However, the following
+		 * will apply the threshold again and therefore bring the
+		 * counter under the threshold.
+		 */
+		t = this_cpu_read(pcp->stat_threshold);
+
+		o = this_cpu_read(*p);
+		n = delta + o;
+
+		if (n > t || n < -t) {
+			int os = overstep_mode * (t >> 1) ;
+
+			/* Overflow must be added to zone counters */
+			z = n + os;
+			n = -os;
+		}
+	} while (this_cpu_cmpxchg(*p, o, n) != o);
+
+	if (z)
+		zone_page_state_add(z, zone, item);
+}
+
+void mod_zone_page_state(struct zone *zone, enum zone_stat_item item,
+					int delta)
+{
+	mod_state(zone, item, delta, 0);
+}
+EXPORT_SYMBOL(mod_zone_page_state);
+
+void inc_zone_state(struct zone *zone, enum zone_stat_item item)
+{
+	mod_state(zone, item, 1, 1);
+}
+
+void inc_zone_page_state(struct page *page, enum zone_stat_item item)
+{
+	mod_state(page_zone(page), item, 1, 1);
+}
+EXPORT_SYMBOL(inc_zone_page_state);
+
+void dec_zone_page_state(struct page *page, enum zone_stat_item item)
+{
+	mod_state(page_zone(page), item, -1, -1);
+}
+EXPORT_SYMBOL(dec_zone_page_state);
+#else
+/*
+ * Use interrupt disable to serialize counter updates
+ */
+void mod_zone_page_state(struct zone *zone, enum zone_stat_item item,
+					int delta)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__mod_zone_page_state(zone, item, delta);
+	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(mod_zone_page_state);
+
 void inc_zone_state(struct zone *zone, enum zone_stat_item item)
 {
 	unsigned long flags;
@@ -291,6 +367,7 @@ void dec_zone_page_state(struct page *page, enum zone_stat_item item)
 	local_irq_restore(flags);
 }
 EXPORT_SYMBOL(dec_zone_page_state);
+#endif
 
 /*
  * Update the zone counters for one cpu.
@@ -750,8 +827,6 @@ static const char * const vmstat_text[] = {
 	"nr_shmem",
 	"nr_dirtied",
 	"nr_written",
-	"nr_dirty_threshold",
-	"nr_dirty_background_threshold",
 
 #ifdef CONFIG_NUMA
 	"numa_hit",
@@ -761,6 +836,8 @@ static const char * const vmstat_text[] = {
 	"numa_local",
 	"numa_other",
 #endif
+	"nr_dirty_threshold",
+	"nr_dirty_background_threshold",
 
 #ifdef CONFIG_VM_EVENT_COUNTERS
 	"pgpgin",
@@ -1033,7 +1110,7 @@ static int __cpuinit vmstat_cpuup_callback(struct notifier_block *nfb,
 		break;
 	case CPU_DOWN_PREPARE:
 	case CPU_DOWN_PREPARE_FROZEN:
-		cancel_rearming_delayed_work(&per_cpu(vmstat_work, cpu));
+		cancel_delayed_work_sync(&per_cpu(vmstat_work, cpu));
 		per_cpu(vmstat_work, cpu).work.func = NULL;
 		break;
 	case CPU_DOWN_FAILED:
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 52077ca2207..6e64f7c6a2e 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -272,13 +272,11 @@ static int register_vlan_device(struct net_device *real_dev, u16 vlan_id)
 		snprintf(name, IFNAMSIZ, "vlan%.4i", vlan_id);
 	}
 
-	new_dev = alloc_netdev_mq(sizeof(struct vlan_dev_info), name,
-				  vlan_setup, real_dev->num_tx_queues);
+	new_dev = alloc_netdev(sizeof(struct vlan_dev_info), name, vlan_setup);
 
 	if (new_dev == NULL)
 		return -ENOBUFS;
 
-	netif_copy_real_num_queues(new_dev, real_dev);
 	dev_net_set(new_dev, net);
 	/* need 4 bytes for extra VLAN header info,
 	 * hope the underlying device can handle it.
@@ -334,12 +332,15 @@ static void vlan_transfer_features(struct net_device *dev,
 	vlandev->features &= ~dev->vlan_features;
 	vlandev->features |= dev->features & dev->vlan_features;
 	vlandev->gso_max_size = dev->gso_max_size;
+
+	if (dev->features & NETIF_F_HW_VLAN_TX)
+		vlandev->hard_header_len = dev->hard_header_len;
+	else
+		vlandev->hard_header_len = dev->hard_header_len + VLAN_HLEN;
+
 #if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
 	vlandev->fcoe_ddp_xid = dev->fcoe_ddp_xid;
 #endif
-	vlandev->real_num_tx_queues = dev->real_num_tx_queues;
-	BUG_ON(vlandev->real_num_tx_queues > vlandev->num_tx_queues);
-
 	if (old_features != vlandev->features)
 		netdev_features_change(vlandev);
 }
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index db01b3181fd..5687c9b95f3 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -19,19 +19,25 @@ struct vlan_priority_tci_mapping {
 
 
 /**
- *	struct vlan_rx_stats - VLAN percpu rx stats
+ *	struct vlan_pcpu_stats - VLAN percpu rx/tx stats
  *	@rx_packets: number of received packets
  *	@rx_bytes: number of received bytes
  *	@rx_multicast: number of received multicast packets
+ *	@tx_packets: number of transmitted packets
+ *	@tx_bytes: number of transmitted bytes
  *	@syncp: synchronization point for 64bit counters
- *	@rx_errors: number of errors
+ *	@rx_errors: number of rx errors
+ *	@tx_dropped: number of tx drops
  */
-struct vlan_rx_stats {
+struct vlan_pcpu_stats {
 	u64			rx_packets;
 	u64			rx_bytes;
 	u64			rx_multicast;
+	u64			tx_packets;
+	u64			tx_bytes;
 	struct u64_stats_sync	syncp;
-	unsigned long		rx_errors;
+	u32			rx_errors;
+	u32			tx_dropped;
 };
 
 /**
@@ -45,9 +51,7 @@ struct vlan_rx_stats {
  *	@real_dev: underlying netdevice
  *	@real_dev_addr: address of underlying netdevice
  *	@dent: proc dir entry
- *	@cnt_inc_headroom_on_tx: statistic - number of skb expansions on TX
- *	@cnt_encap_on_xmit: statistic - number of skb encapsulations on TX
- *	@vlan_rx_stats: ptr to percpu rx stats
+ *	@vlan_pcpu_stats: ptr to percpu rx stats
  */
 struct vlan_dev_info {
 	unsigned int				nr_ingress_mappings;
@@ -62,9 +66,7 @@ struct vlan_dev_info {
 	unsigned char				real_dev_addr[ETH_ALEN];
 
 	struct proc_dir_entry			*dent;
-	unsigned long				cnt_inc_headroom_on_tx;
-	unsigned long				cnt_encap_on_xmit;
-	struct vlan_rx_stats __percpu		*vlan_rx_stats;
+	struct vlan_pcpu_stats __percpu		*vlan_pcpu_stats;
 };
 
 static inline struct vlan_dev_info *vlan_dev_info(const struct net_device *dev)
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 69b2f79800a..ce8e3ab3e7a 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -9,7 +9,7 @@ bool vlan_hwaccel_do_receive(struct sk_buff **skbp)
 	struct sk_buff *skb = *skbp;
 	u16 vlan_id = skb->vlan_tci & VLAN_VID_MASK;
 	struct net_device *vlan_dev;
-	struct vlan_rx_stats *rx_stats;
+	struct vlan_pcpu_stats *rx_stats;
 
 	vlan_dev = vlan_find_dev(skb->dev, vlan_id);
 	if (!vlan_dev) {
@@ -26,7 +26,7 @@ bool vlan_hwaccel_do_receive(struct sk_buff **skbp)
 	skb->priority = vlan_get_ingress_priority(vlan_dev, skb->vlan_tci);
 	skb->vlan_tci = 0;
 
-	rx_stats = this_cpu_ptr(vlan_dev_info(vlan_dev)->vlan_rx_stats);
+	rx_stats = this_cpu_ptr(vlan_dev_info(vlan_dev)->vlan_pcpu_stats);
 
 	u64_stats_update_begin(&rx_stats->syncp);
 	rx_stats->rx_packets++;
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 14e3d1fa07a..be737539f34 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -141,7 +141,7 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
 		  struct packet_type *ptype, struct net_device *orig_dev)
 {
 	struct vlan_hdr *vhdr;
-	struct vlan_rx_stats *rx_stats;
+	struct vlan_pcpu_stats *rx_stats;
 	struct net_device *vlan_dev;
 	u16 vlan_id;
 	u16 vlan_tci;
@@ -177,7 +177,7 @@ int vlan_skb_recv(struct sk_buff *skb, struct net_device *dev,
 	} else {
 		skb->dev = vlan_dev;
 
-		rx_stats = this_cpu_ptr(vlan_dev_info(skb->dev)->vlan_rx_stats);
+		rx_stats = this_cpu_ptr(vlan_dev_info(skb->dev)->vlan_pcpu_stats);
 
 		u64_stats_update_begin(&rx_stats->syncp);
 		rx_stats->rx_packets++;
@@ -274,9 +274,6 @@ static int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
 	u16 vlan_tci = 0;
 	int rc;
 
-	if (WARN_ON(skb_headroom(skb) < dev->hard_header_len))
-		return -ENOSPC;
-
 	if (!(vlan_dev_info(dev)->flags & VLAN_FLAG_REORDER_HDR)) {
 		vhdr = (struct vlan_hdr *) skb_push(skb, VLAN_HLEN);
 
@@ -313,8 +310,6 @@ static int vlan_dev_hard_header(struct sk_buff *skb, struct net_device *dev,
 static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb,
 					    struct net_device *dev)
 {
-	int i = skb_get_queue_mapping(skb);
-	struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
 	struct vlan_ethhdr *veth = (struct vlan_ethhdr *)(skb->data);
 	unsigned int len;
 	int ret;
@@ -326,71 +321,31 @@ static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb,
 	 */
 	if (veth->h_vlan_proto != htons(ETH_P_8021Q) ||
 	    vlan_dev_info(dev)->flags & VLAN_FLAG_REORDER_HDR) {
-		unsigned int orig_headroom = skb_headroom(skb);
 		u16 vlan_tci;
-
-		vlan_dev_info(dev)->cnt_encap_on_xmit++;
-
 		vlan_tci = vlan_dev_info(dev)->vlan_id;
 		vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb);
-		skb = __vlan_put_tag(skb, vlan_tci);
-		if (!skb) {
-			txq->tx_dropped++;
-			return NETDEV_TX_OK;
-		}
-
-		if (orig_headroom < VLAN_HLEN)
-			vlan_dev_info(dev)->cnt_inc_headroom_on_tx++;
+		skb = __vlan_hwaccel_put_tag(skb, vlan_tci);
 	}
 
-
 	skb_set_dev(skb, vlan_dev_info(dev)->real_dev);
 	len = skb->len;
 	ret = dev_queue_xmit(skb);
 
 	if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) {
-		txq->tx_packets++;
-		txq->tx_bytes += len;
-	} else
-		txq->tx_dropped++;
+		struct vlan_pcpu_stats *stats;
 
-	return ret;
-}
-
-static netdev_tx_t vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb,
-						    struct net_device *dev)
-{
-	int i = skb_get_queue_mapping(skb);
-	struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-	u16 vlan_tci;
-	unsigned int len;
-	int ret;
-
-	vlan_tci = vlan_dev_info(dev)->vlan_id;
-	vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb);
-	skb = __vlan_hwaccel_put_tag(skb, vlan_tci);
-
-	skb->dev = vlan_dev_info(dev)->real_dev;
-	len = skb->len;
-	ret = dev_queue_xmit(skb);
-
-	if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) {
-		txq->tx_packets++;
-		txq->tx_bytes += len;
-	} else
-		txq->tx_dropped++;
+		stats = this_cpu_ptr(vlan_dev_info(dev)->vlan_pcpu_stats);
+		u64_stats_update_begin(&stats->syncp);
+		stats->tx_packets++;
+		stats->tx_bytes += len;
+		u64_stats_update_begin(&stats->syncp);
+	} else {
+		this_cpu_inc(vlan_dev_info(dev)->vlan_pcpu_stats->tx_dropped);
+	}
 
 	return ret;
 }
 
-static u16 vlan_dev_select_queue(struct net_device *dev, struct sk_buff *skb)
-{
-	struct net_device *rdev = vlan_dev_info(dev)->real_dev;
-	const struct net_device_ops *ops = rdev->netdev_ops;
-
-	return ops->ndo_select_queue(rdev, skb);
-}
-
 static int vlan_dev_change_mtu(struct net_device *dev, int new_mtu)
 {
 	/* TODO: gotta make sure the underlying layer can handle it,
@@ -719,8 +674,7 @@ static const struct header_ops vlan_header_ops = {
 	.parse	 = eth_header_parse,
 };
 
-static const struct net_device_ops vlan_netdev_ops, vlan_netdev_accel_ops,
-		    vlan_netdev_ops_sq, vlan_netdev_accel_ops_sq;
+static const struct net_device_ops vlan_netdev_ops;
 
 static int vlan_dev_init(struct net_device *dev)
 {
@@ -738,6 +692,7 @@ static int vlan_dev_init(struct net_device *dev)
 		      (1<<__LINK_STATE_PRESENT);
 
 	dev->features |= real_dev->features & real_dev->vlan_features;
+	dev->features |= NETIF_F_LLTX;
 	dev->gso_max_size = real_dev->gso_max_size;
 
 	/* ipv6 shared card related stuff */
@@ -755,26 +710,20 @@ static int vlan_dev_init(struct net_device *dev)
 	if (real_dev->features & NETIF_F_HW_VLAN_TX) {
 		dev->header_ops      = real_dev->header_ops;
 		dev->hard_header_len = real_dev->hard_header_len;
-		if (real_dev->netdev_ops->ndo_select_queue)
-			dev->netdev_ops = &vlan_netdev_accel_ops_sq;
-		else
-			dev->netdev_ops = &vlan_netdev_accel_ops;
 	} else {
 		dev->header_ops      = &vlan_header_ops;
 		dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
-		if (real_dev->netdev_ops->ndo_select_queue)
-			dev->netdev_ops = &vlan_netdev_ops_sq;
-		else
-			dev->netdev_ops = &vlan_netdev_ops;
 	}
 
+	dev->netdev_ops = &vlan_netdev_ops;
+
 	if (is_vlan_dev(real_dev))
 		subclass = 1;
 
 	vlan_dev_set_lockdep_class(dev, subclass);
 
-	vlan_dev_info(dev)->vlan_rx_stats = alloc_percpu(struct vlan_rx_stats);
-	if (!vlan_dev_info(dev)->vlan_rx_stats)
+	vlan_dev_info(dev)->vlan_pcpu_stats = alloc_percpu(struct vlan_pcpu_stats);
+	if (!vlan_dev_info(dev)->vlan_pcpu_stats)
 		return -ENOMEM;
 
 	return 0;
@@ -786,8 +735,8 @@ static void vlan_dev_uninit(struct net_device *dev)
 	struct vlan_dev_info *vlan = vlan_dev_info(dev);
 	int i;
 
-	free_percpu(vlan->vlan_rx_stats);
-	vlan->vlan_rx_stats = NULL;
+	free_percpu(vlan->vlan_pcpu_stats);
+	vlan->vlan_pcpu_stats = NULL;
 	for (i = 0; i < ARRAY_SIZE(vlan->egress_priority_map); i++) {
 		while ((pm = vlan->egress_priority_map[i]) != NULL) {
 			vlan->egress_priority_map[i] = pm->next;
@@ -825,33 +774,37 @@ static u32 vlan_ethtool_get_flags(struct net_device *dev)
 
 static struct rtnl_link_stats64 *vlan_dev_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
 {
-	dev_txq_stats_fold(dev, stats);
 
-	if (vlan_dev_info(dev)->vlan_rx_stats) {
-		struct vlan_rx_stats *p, accum = {0};
+	if (vlan_dev_info(dev)->vlan_pcpu_stats) {
+		struct vlan_pcpu_stats *p;
+		u32 rx_errors = 0, tx_dropped = 0;
 		int i;
 
 		for_each_possible_cpu(i) {
-			u64 rxpackets, rxbytes, rxmulticast;
+			u64 rxpackets, rxbytes, rxmulticast, txpackets, txbytes;
 			unsigned int start;
 
-			p = per_cpu_ptr(vlan_dev_info(dev)->vlan_rx_stats, i);
+			p = per_cpu_ptr(vlan_dev_info(dev)->vlan_pcpu_stats, i);
 			do {
 				start = u64_stats_fetch_begin_bh(&p->syncp);
 				rxpackets	= p->rx_packets;
 				rxbytes		= p->rx_bytes;
 				rxmulticast	= p->rx_multicast;
+				txpackets	= p->tx_packets;
+				txbytes		= p->tx_bytes;
 			} while (u64_stats_fetch_retry_bh(&p->syncp, start));
-			accum.rx_packets += rxpackets;
-			accum.rx_bytes   += rxbytes;
-			accum.rx_multicast += rxmulticast;
-			/* rx_errors is ulong, not protected by syncp */
-			accum.rx_errors  += p->rx_errors;
+
+			stats->rx_packets	+= rxpackets;
+			stats->rx_bytes		+= rxbytes;
+			stats->multicast	+= rxmulticast;
+			stats->tx_packets	+= txpackets;
+			stats->tx_bytes		+= txbytes;
+			/* rx_errors & tx_dropped are u32 */
+			rx_errors	+= p->rx_errors;
+			tx_dropped	+= p->tx_dropped;
 		}
-		stats->rx_packets = accum.rx_packets;
-		stats->rx_bytes   = accum.rx_bytes;
-		stats->rx_errors  = accum.rx_errors;
-		stats->multicast  = accum.rx_multicast;
+		stats->rx_errors  = rx_errors;
+		stats->tx_dropped = tx_dropped;
 	}
 	return stats;
 }
@@ -908,80 +861,6 @@ static const struct net_device_ops vlan_netdev_ops = {
 #endif
 };
 
-static const struct net_device_ops vlan_netdev_accel_ops = {
-	.ndo_change_mtu		= vlan_dev_change_mtu,
-	.ndo_init		= vlan_dev_init,
-	.ndo_uninit		= vlan_dev_uninit,
-	.ndo_open		= vlan_dev_open,
-	.ndo_stop		= vlan_dev_stop,
-	.ndo_start_xmit =  vlan_dev_hwaccel_hard_start_xmit,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= vlan_dev_set_mac_address,
-	.ndo_set_rx_mode	= vlan_dev_set_rx_mode,
-	.ndo_set_multicast_list	= vlan_dev_set_rx_mode,
-	.ndo_change_rx_flags	= vlan_dev_change_rx_flags,
-	.ndo_do_ioctl		= vlan_dev_ioctl,
-	.ndo_neigh_setup	= vlan_dev_neigh_setup,
-	.ndo_get_stats64	= vlan_dev_get_stats64,
-#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
-	.ndo_fcoe_ddp_setup	= vlan_dev_fcoe_ddp_setup,
-	.ndo_fcoe_ddp_done	= vlan_dev_fcoe_ddp_done,
-	.ndo_fcoe_enable	= vlan_dev_fcoe_enable,
-	.ndo_fcoe_disable	= vlan_dev_fcoe_disable,
-	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
-#endif
-};
-
-static const struct net_device_ops vlan_netdev_ops_sq = {
-	.ndo_select_queue	= vlan_dev_select_queue,
-	.ndo_change_mtu		= vlan_dev_change_mtu,
-	.ndo_init		= vlan_dev_init,
-	.ndo_uninit		= vlan_dev_uninit,
-	.ndo_open		= vlan_dev_open,
-	.ndo_stop		= vlan_dev_stop,
-	.ndo_start_xmit =  vlan_dev_hard_start_xmit,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= vlan_dev_set_mac_address,
-	.ndo_set_rx_mode	= vlan_dev_set_rx_mode,
-	.ndo_set_multicast_list	= vlan_dev_set_rx_mode,
-	.ndo_change_rx_flags	= vlan_dev_change_rx_flags,
-	.ndo_do_ioctl		= vlan_dev_ioctl,
-	.ndo_neigh_setup	= vlan_dev_neigh_setup,
-	.ndo_get_stats64	= vlan_dev_get_stats64,
-#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
-	.ndo_fcoe_ddp_setup	= vlan_dev_fcoe_ddp_setup,
-	.ndo_fcoe_ddp_done	= vlan_dev_fcoe_ddp_done,
-	.ndo_fcoe_enable	= vlan_dev_fcoe_enable,
-	.ndo_fcoe_disable	= vlan_dev_fcoe_disable,
-	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
-#endif
-};
-
-static const struct net_device_ops vlan_netdev_accel_ops_sq = {
-	.ndo_select_queue	= vlan_dev_select_queue,
-	.ndo_change_mtu		= vlan_dev_change_mtu,
-	.ndo_init		= vlan_dev_init,
-	.ndo_uninit		= vlan_dev_uninit,
-	.ndo_open		= vlan_dev_open,
-	.ndo_stop		= vlan_dev_stop,
-	.ndo_start_xmit =  vlan_dev_hwaccel_hard_start_xmit,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= vlan_dev_set_mac_address,
-	.ndo_set_rx_mode	= vlan_dev_set_rx_mode,
-	.ndo_set_multicast_list	= vlan_dev_set_rx_mode,
-	.ndo_change_rx_flags	= vlan_dev_change_rx_flags,
-	.ndo_do_ioctl		= vlan_dev_ioctl,
-	.ndo_neigh_setup	= vlan_dev_neigh_setup,
-	.ndo_get_stats64	= vlan_dev_get_stats64,
-#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
-	.ndo_fcoe_ddp_setup	= vlan_dev_fcoe_ddp_setup,
-	.ndo_fcoe_ddp_done	= vlan_dev_fcoe_ddp_done,
-	.ndo_fcoe_enable	= vlan_dev_fcoe_enable,
-	.ndo_fcoe_disable	= vlan_dev_fcoe_disable,
-	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
-#endif
-};
-
 void vlan_setup(struct net_device *dev)
 {
 	ether_setup(dev);
diff --git a/net/8021q/vlan_netlink.c b/net/8021q/vlan_netlink.c
index ddc105734af..be9a5c19a77 100644
--- a/net/8021q/vlan_netlink.c
+++ b/net/8021q/vlan_netlink.c
@@ -101,25 +101,6 @@ static int vlan_changelink(struct net_device *dev,
 	return 0;
 }
 
-static int vlan_get_tx_queues(struct net *net,
-			      struct nlattr *tb[],
-			      unsigned int *num_tx_queues,
-			      unsigned int *real_num_tx_queues)
-{
-	struct net_device *real_dev;
-
-	if (!tb[IFLA_LINK])
-		return -EINVAL;
-
-	real_dev = __dev_get_by_index(net, nla_get_u32(tb[IFLA_LINK]));
-	if (!real_dev)
-		return -ENODEV;
-
-	*num_tx_queues      = real_dev->num_tx_queues;
-	*real_num_tx_queues = real_dev->real_num_tx_queues;
-	return 0;
-}
-
 static int vlan_newlink(struct net *src_net, struct net_device *dev,
 			struct nlattr *tb[], struct nlattr *data[])
 {
@@ -237,7 +218,6 @@ struct rtnl_link_ops vlan_link_ops __read_mostly = {
 	.maxtype	= IFLA_VLAN_MAX,
 	.policy		= vlan_policy,
 	.priv_size	= sizeof(struct vlan_dev_info),
-	.get_tx_queues  = vlan_get_tx_queues,
 	.setup		= vlan_setup,
 	.validate	= vlan_validate,
 	.newlink	= vlan_newlink,
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index 80e280f5668..d1314cf18ad 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -280,7 +280,6 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset)
 	const struct vlan_dev_info *dev_info = vlan_dev_info(vlandev);
 	struct rtnl_link_stats64 temp;
 	const struct rtnl_link_stats64 *stats;
-	static const char fmt[] = "%30s %12lu\n";
 	static const char fmt64[] = "%30s %12llu\n";
 	int i;
 
@@ -299,10 +298,6 @@ static int vlandev_seq_show(struct seq_file *seq, void *offset)
 	seq_puts(seq, "\n");
 	seq_printf(seq, fmt64, "total frames transmitted", stats->tx_packets);
 	seq_printf(seq, fmt64, "total bytes transmitted", stats->tx_bytes);
-	seq_printf(seq, fmt, "total headroom inc",
-		   dev_info->cnt_inc_headroom_on_tx);
-	seq_printf(seq, fmt, "total encap on xmit",
-		   dev_info->cnt_encap_on_xmit);
 	seq_printf(seq, "Device: %s", dev_info->real_dev->name);
 	/* now show all PRIORITY mappings relating to this VLAN */
 	seq_printf(seq, "\nINGRESS priority mappings: "
diff --git a/net/9p/protocol.c b/net/9p/protocol.c
index 45c15f49140..798beac7f10 100644
--- a/net/9p/protocol.c
+++ b/net/9p/protocol.c
@@ -27,31 +27,16 @@
 
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/kernel.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
+#include <linux/stddef.h>
 #include <linux/types.h>
 #include <net/9p/9p.h>
 #include <net/9p/client.h>
 #include "protocol.h"
 
-#ifndef MIN
-#define MIN(a, b) (((a) < (b)) ? (a) : (b))
-#endif
-
-#ifndef MAX
-#define MAX(a, b) (((a) > (b)) ? (a) : (b))
-#endif
-
-#ifndef offset_of
-#define offset_of(type, memb) \
-	((unsigned long)(&((type *)0)->memb))
-#endif
-#ifndef container_of
-#define container_of(obj, type, memb) \
-	((type *)(((char *)obj) - offset_of(type, memb)))
-#endif
-
 static int
 p9pdu_writef(struct p9_fcall *pdu, int proto_version, const char *fmt, ...);
 
@@ -104,7 +89,7 @@ EXPORT_SYMBOL(p9stat_free);
 
 static size_t pdu_read(struct p9_fcall *pdu, void *data, size_t size)
 {
-	size_t len = MIN(pdu->size - pdu->offset, size);
+	size_t len = min(pdu->size - pdu->offset, size);
 	memcpy(data, &pdu->sdata[pdu->offset], len);
 	pdu->offset += len;
 	return size - len;
@@ -112,7 +97,7 @@ static size_t pdu_read(struct p9_fcall *pdu, void *data, size_t size)
 
 static size_t pdu_write(struct p9_fcall *pdu, const void *data, size_t size)
 {
-	size_t len = MIN(pdu->capacity - pdu->size, size);
+	size_t len = min(pdu->capacity - pdu->size, size);
 	memcpy(&pdu->sdata[pdu->size], data, len);
 	pdu->size += len;
 	return size - len;
@@ -121,7 +106,7 @@ static size_t pdu_write(struct p9_fcall *pdu, const void *data, size_t size)
 static size_t
 pdu_write_u(struct p9_fcall *pdu, const char __user *udata, size_t size)
 {
-	size_t len = MIN(pdu->capacity - pdu->size, size);
+	size_t len = min(pdu->capacity - pdu->size, size);
 	if (copy_from_user(&pdu->sdata[pdu->size], udata, len))
 		len = 0;
 
@@ -201,7 +186,7 @@ p9pdu_vreadf(struct p9_fcall *pdu, int proto_version, const char *fmt,
 				if (errcode)
 					break;
 
-				size = MAX(len, 0);
+				size = max_t(int16_t, len, 0);
 
 				*sptr = kmalloc(size + 1, GFP_KERNEL);
 				if (*sptr == NULL) {
@@ -256,8 +241,8 @@ p9pdu_vreadf(struct p9_fcall *pdu, int proto_version, const char *fmt,
 				    p9pdu_readf(pdu, proto_version, "d", count);
 				if (!errcode) {
 					*count =
-					    MIN(*count,
-						pdu->size - pdu->offset);
+					    min_t(int32_t, *count,
+						  pdu->size - pdu->offset);
 					*data = &pdu->sdata[pdu->offset];
 				}
 			}
@@ -421,7 +406,7 @@ p9pdu_vwritef(struct p9_fcall *pdu, int proto_version, const char *fmt,
 				const char *sptr = va_arg(ap, const char *);
 				int16_t len = 0;
 				if (sptr)
-					len = MIN(strlen(sptr), USHRT_MAX);
+					len = min_t(int16_t, strlen(sptr), USHRT_MAX);
 
 				errcode = p9pdu_writef(pdu, proto_version,
 								"w", len);
diff --git a/net/Kconfig b/net/Kconfig
index 55fd82e9ffd..ad0aafe903f 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -214,12 +214,18 @@ source "net/ieee802154/Kconfig"
 source "net/sched/Kconfig"
 source "net/dcb/Kconfig"
 source "net/dns_resolver/Kconfig"
+source "net/batman-adv/Kconfig"
 
 config RPS
 	boolean
 	depends on SMP && SYSFS && USE_GENERIC_SMP_HELPERS
 	default y
 
+config XPS
+	boolean
+	depends on SMP && SYSFS && USE_GENERIC_SMP_HELPERS
+	default y
+
 menu "Network testing"
 
 config NET_PKTGEN
diff --git a/net/Makefile b/net/Makefile
index 6b7bfd7f141..a3330ebe2c5 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -69,3 +69,4 @@ endif
 obj-$(CONFIG_WIMAX)		+= wimax/
 obj-$(CONFIG_DNS_RESOLVER)	+= dns_resolver/
 obj-$(CONFIG_CEPH_LIB)		+= ceph/
+obj-$(CONFIG_BATMAN_ADV)	+= batman-adv/
diff --git a/net/atm/atm_sysfs.c b/net/atm/atm_sysfs.c
index 799c631f0fe..f7fa67c7876 100644
--- a/net/atm/atm_sysfs.c
+++ b/net/atm/atm_sysfs.c
@@ -143,12 +143,13 @@ static struct class atm_class = {
 	.dev_uevent		= atm_uevent,
 };
 
-int atm_register_sysfs(struct atm_dev *adev)
+int atm_register_sysfs(struct atm_dev *adev, struct device *parent)
 {
 	struct device *cdev = &adev->class_dev;
 	int i, j, err;
 
 	cdev->class = &atm_class;
+	cdev->parent = parent;
 	dev_set_drvdata(cdev, adev);
 
 	dev_set_name(cdev, "%s%d", adev->type, adev->number);
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index ad2b232a205..fce2eae8d47 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -97,7 +97,7 @@ static LIST_HEAD(br2684_devs);
 
 static inline struct br2684_dev *BRPRIV(const struct net_device *net_dev)
 {
-	return (struct br2684_dev *)netdev_priv(net_dev);
+	return netdev_priv(net_dev);
 }
 
 static inline struct net_device *list_entry_brdev(const struct list_head *le)
diff --git a/net/atm/clip.c b/net/atm/clip.c
index ff956d1115b..d257da50fcf 100644
--- a/net/atm/clip.c
+++ b/net/atm/clip.c
@@ -502,7 +502,8 @@ static int clip_setentry(struct atm_vcc *vcc, __be32 ip)
 	struct atmarp_entry *entry;
 	int error;
 	struct clip_vcc *clip_vcc;
-	struct flowi fl = { .nl_u = { .ip4_u = { .daddr = ip, .tos = 1}} };
+	struct flowi fl = { .fl4_dst = ip,
+			    .fl4_tos = 1 };
 	struct rtable *rt;
 
 	if (vcc->push != clip_push) {
diff --git a/net/atm/lec.c b/net/atm/lec.c
index 181d70c73d7..38754fdb88b 100644
--- a/net/atm/lec.c
+++ b/net/atm/lec.c
@@ -816,8 +816,7 @@ static int lec_mcast_attach(struct atm_vcc *vcc, int arg)
 	if (arg < 0 || arg >= MAX_LEC_ITF || !dev_lec[arg])
 		return -EINVAL;
 	vcc->proto_data = dev_lec[arg];
-	return lec_mcast_make((struct lec_priv *)netdev_priv(dev_lec[arg]),
-				vcc);
+	return lec_mcast_make(netdev_priv(dev_lec[arg]), vcc);
 }
 
 /* Initialize device. */
@@ -1608,7 +1607,7 @@ static void lec_arp_destroy(struct lec_priv *priv)
 	struct lec_arp_table *entry;
 	int i;
 
-	cancel_rearming_delayed_work(&priv->lec_arp_work);
+	cancel_delayed_work_sync(&priv->lec_arp_work);
 
 	/*
 	 * Remove all entries
diff --git a/net/atm/mpc.c b/net/atm/mpc.c
index 74bcc662c3d..644cdf07164 100644
--- a/net/atm/mpc.c
+++ b/net/atm/mpc.c
@@ -64,8 +64,6 @@
 	do { if (0) printk(KERN_CONT format, ##args); } while (0)
 #endif
 
-#define MPOA_TAG_LEN 4
-
 /* mpc_daemon -> kernel */
 static void MPOA_trigger_rcvd(struct k_message *msg, struct mpoa_client *mpc);
 static void MPOA_res_reply_rcvd(struct k_message *msg, struct mpoa_client *mpc);
diff --git a/net/atm/resources.c b/net/atm/resources.c
index d29e5826151..23f45ce6f35 100644
--- a/net/atm/resources.c
+++ b/net/atm/resources.c
@@ -74,8 +74,9 @@ struct atm_dev *atm_dev_lookup(int number)
 }
 EXPORT_SYMBOL(atm_dev_lookup);
 
-struct atm_dev *atm_dev_register(const char *type, const struct atmdev_ops *ops,
-				 int number, unsigned long *flags)
+struct atm_dev *atm_dev_register(const char *type, struct device *parent,
+				 const struct atmdev_ops *ops, int number,
+				 unsigned long *flags)
 {
 	struct atm_dev *dev, *inuse;
 
@@ -115,7 +116,7 @@ struct atm_dev *atm_dev_register(const char *type, const struct atmdev_ops *ops,
 		goto out_fail;
 	}
 
-	if (atm_register_sysfs(dev) < 0) {
+	if (atm_register_sysfs(dev, parent) < 0) {
 		pr_err("atm_register_sysfs failed for dev %s\n", type);
 		atm_proc_dev_deregister(dev);
 		goto out_fail;
diff --git a/net/atm/resources.h b/net/atm/resources.h
index 126fb1840df..521431e3050 100644
--- a/net/atm/resources.h
+++ b/net/atm/resources.h
@@ -42,6 +42,6 @@ static inline void atm_proc_dev_deregister(struct atm_dev *dev)
 
 #endif /* CONFIG_PROC_FS */
 
-int atm_register_sysfs(struct atm_dev *adev);
+int atm_register_sysfs(struct atm_dev *adev, struct device *parent);
 void atm_unregister_sysfs(struct atm_dev *adev);
 #endif
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index 26eaebf4aaa..bb86d293239 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -1392,6 +1392,7 @@ static int ax25_getname(struct socket *sock, struct sockaddr *uaddr,
 	ax25_cb *ax25;
 	int err = 0;
 
+	memset(fsa, 0, sizeof(fsa));
 	lock_sock(sk);
 	ax25 = ax25_sk(sk);
 
@@ -1403,7 +1404,6 @@ static int ax25_getname(struct socket *sock, struct sockaddr *uaddr,
 
 		fsa->fsa_ax25.sax25_family = AF_AX25;
 		fsa->fsa_ax25.sax25_call   = ax25->dest_addr;
-		fsa->fsa_ax25.sax25_ndigis = 0;
 
 		if (ax25->digipeat != NULL) {
 			ndigi = ax25->digipeat->ndigi;
diff --git a/net/batman-adv/Kconfig b/net/batman-adv/Kconfig
new file mode 100644
index 00000000000..6c051ad833e
--- /dev/null
+++ b/net/batman-adv/Kconfig
@@ -0,0 +1,25 @@
+#
+# B.A.T.M.A.N meshing protocol
+#
+
+config BATMAN_ADV
+	tristate "B.A.T.M.A.N. Advanced Meshing Protocol"
+	depends on NET
+        default n
+	---help---
+
+        B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
+        a routing protocol for multi-hop ad-hoc mesh networks. The
+        networks may be wired or wireless. See
+        http://www.open-mesh.org/ for more information and user space
+        tools.
+
+config BATMAN_ADV_DEBUG
+	bool "B.A.T.M.A.N. debugging"
+	depends on BATMAN_ADV != n
+	---help---
+
+	  This is an option for use by developers; most people should
+	  say N here. This enables compilation of support for
+	  outputting debugging information to the kernel log. The
+	  output is controlled via the module parameter debug.
diff --git a/net/batman-adv/Makefile b/net/batman-adv/Makefile
new file mode 100644
index 00000000000..d936aeccd19
--- /dev/null
+++ b/net/batman-adv/Makefile
@@ -0,0 +1,39 @@
+#
+# Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+#
+# Marek Lindner, Simon Wunderlich
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of version 2 of the GNU General Public
+# License as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA
+#
+
+obj-$(CONFIG_BATMAN_ADV) += batman-adv.o
+batman-adv-y += aggregation.o
+batman-adv-y += bat_debugfs.o
+batman-adv-y += bat_sysfs.o
+batman-adv-y += bitarray.o
+batman-adv-y += gateway_client.o
+batman-adv-y += gateway_common.o
+batman-adv-y += hard-interface.o
+batman-adv-y += hash.o
+batman-adv-y += icmp_socket.o
+batman-adv-y += main.o
+batman-adv-y += originator.o
+batman-adv-y += ring_buffer.o
+batman-adv-y += routing.o
+batman-adv-y += send.o
+batman-adv-y += soft-interface.o
+batman-adv-y += translation-table.o
+batman-adv-y += unicast.o
+batman-adv-y += vis.o
diff --git a/net/batman-adv/aggregation.c b/net/batman-adv/aggregation.c
new file mode 100644
index 00000000000..3850a3ecf94
--- /dev/null
+++ b/net/batman-adv/aggregation.c
@@ -0,0 +1,273 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "aggregation.h"
+#include "send.h"
+#include "routing.h"
+
+/* calculate the size of the hna information for a given packet */
+static int hna_len(struct batman_packet *batman_packet)
+{
+	return batman_packet->num_hna * ETH_ALEN;
+}
+
+/* return true if new_packet can be aggregated with forw_packet */
+static bool can_aggregate_with(struct batman_packet *new_batman_packet,
+			       int packet_len,
+			       unsigned long send_time,
+			       bool directlink,
+			       struct batman_if *if_incoming,
+			       struct forw_packet *forw_packet)
+{
+	struct batman_packet *batman_packet =
+		(struct batman_packet *)forw_packet->skb->data;
+	int aggregated_bytes = forw_packet->packet_len + packet_len;
+
+	/**
+	 * we can aggregate the current packet to this aggregated packet
+	 * if:
+	 *
+	 * - the send time is within our MAX_AGGREGATION_MS time
+	 * - the resulting packet wont be bigger than
+	 *   MAX_AGGREGATION_BYTES
+	 */
+
+	if (time_before(send_time, forw_packet->send_time) &&
+	    time_after_eq(send_time + msecs_to_jiffies(MAX_AGGREGATION_MS),
+					forw_packet->send_time) &&
+	    (aggregated_bytes <= MAX_AGGREGATION_BYTES)) {
+
+		/**
+		 * check aggregation compatibility
+		 * -> direct link packets are broadcasted on
+		 *    their interface only
+		 * -> aggregate packet if the current packet is
+		 *    a "global" packet as well as the base
+		 *    packet
+		 */
+
+		/* packets without direct link flag and high TTL
+		 * are flooded through the net  */
+		if ((!directlink) &&
+		    (!(batman_packet->flags & DIRECTLINK)) &&
+		    (batman_packet->ttl != 1) &&
+
+		    /* own packets originating non-primary
+		     * interfaces leave only that interface */
+		    ((!forw_packet->own) ||
+		     (forw_packet->if_incoming->if_num == 0)))
+			return true;
+
+		/* if the incoming packet is sent via this one
+		 * interface only - we still can aggregate */
+		if ((directlink) &&
+		    (new_batman_packet->ttl == 1) &&
+		    (forw_packet->if_incoming == if_incoming) &&
+
+		    /* packets from direct neighbors or
+		     * own secondary interface packets
+		     * (= secondary interface packets in general) */
+		    (batman_packet->flags & DIRECTLINK ||
+		     (forw_packet->own &&
+		      forw_packet->if_incoming->if_num != 0)))
+			return true;
+	}
+
+	return false;
+}
+
+#define atomic_dec_not_zero(v)          atomic_add_unless((v), -1, 0)
+/* create a new aggregated packet and add this packet to it */
+static void new_aggregated_packet(unsigned char *packet_buff, int packet_len,
+				  unsigned long send_time, bool direct_link,
+				  struct batman_if *if_incoming,
+				  int own_packet)
+{
+	struct bat_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
+	struct forw_packet *forw_packet_aggr;
+	unsigned char *skb_buff;
+
+	/* own packet should always be scheduled */
+	if (!own_packet) {
+		if (!atomic_dec_not_zero(&bat_priv->batman_queue_left)) {
+			bat_dbg(DBG_BATMAN, bat_priv,
+				"batman packet queue full\n");
+			return;
+		}
+	}
+
+	forw_packet_aggr = kmalloc(sizeof(struct forw_packet), GFP_ATOMIC);
+	if (!forw_packet_aggr) {
+		if (!own_packet)
+			atomic_inc(&bat_priv->batman_queue_left);
+		return;
+	}
+
+	if ((atomic_read(&bat_priv->aggregated_ogms)) &&
+	    (packet_len < MAX_AGGREGATION_BYTES))
+		forw_packet_aggr->skb = dev_alloc_skb(MAX_AGGREGATION_BYTES +
+						      sizeof(struct ethhdr));
+	else
+		forw_packet_aggr->skb = dev_alloc_skb(packet_len +
+						      sizeof(struct ethhdr));
+
+	if (!forw_packet_aggr->skb) {
+		if (!own_packet)
+			atomic_inc(&bat_priv->batman_queue_left);
+		kfree(forw_packet_aggr);
+		return;
+	}
+	skb_reserve(forw_packet_aggr->skb, sizeof(struct ethhdr));
+
+	INIT_HLIST_NODE(&forw_packet_aggr->list);
+
+	skb_buff = skb_put(forw_packet_aggr->skb, packet_len);
+	forw_packet_aggr->packet_len = packet_len;
+	memcpy(skb_buff, packet_buff, packet_len);
+
+	forw_packet_aggr->own = own_packet;
+	forw_packet_aggr->if_incoming = if_incoming;
+	forw_packet_aggr->num_packets = 0;
+	forw_packet_aggr->direct_link_flags = 0;
+	forw_packet_aggr->send_time = send_time;
+
+	/* save packet direct link flag status */
+	if (direct_link)
+		forw_packet_aggr->direct_link_flags |= 1;
+
+	/* add new packet to packet list */
+	spin_lock_bh(&bat_priv->forw_bat_list_lock);
+	hlist_add_head(&forw_packet_aggr->list, &bat_priv->forw_bat_list);
+	spin_unlock_bh(&bat_priv->forw_bat_list_lock);
+
+	/* start timer for this packet */
+	INIT_DELAYED_WORK(&forw_packet_aggr->delayed_work,
+			  send_outstanding_bat_packet);
+	queue_delayed_work(bat_event_workqueue,
+			   &forw_packet_aggr->delayed_work,
+			   send_time - jiffies);
+}
+
+/* aggregate a new packet into the existing aggregation */
+static void aggregate(struct forw_packet *forw_packet_aggr,
+		      unsigned char *packet_buff,
+		      int packet_len,
+		      bool direct_link)
+{
+	unsigned char *skb_buff;
+
+	skb_buff = skb_put(forw_packet_aggr->skb, packet_len);
+	memcpy(skb_buff, packet_buff, packet_len);
+	forw_packet_aggr->packet_len += packet_len;
+	forw_packet_aggr->num_packets++;
+
+	/* save packet direct link flag status */
+	if (direct_link)
+		forw_packet_aggr->direct_link_flags |=
+			(1 << forw_packet_aggr->num_packets);
+}
+
+void add_bat_packet_to_list(struct bat_priv *bat_priv,
+			    unsigned char *packet_buff, int packet_len,
+			    struct batman_if *if_incoming, char own_packet,
+			    unsigned long send_time)
+{
+	/**
+	 * _aggr -> pointer to the packet we want to aggregate with
+	 * _pos -> pointer to the position in the queue
+	 */
+	struct forw_packet *forw_packet_aggr = NULL, *forw_packet_pos = NULL;
+	struct hlist_node *tmp_node;
+	struct batman_packet *batman_packet =
+		(struct batman_packet *)packet_buff;
+	bool direct_link = batman_packet->flags & DIRECTLINK ? 1 : 0;
+
+	/* find position for the packet in the forward queue */
+	spin_lock_bh(&bat_priv->forw_bat_list_lock);
+	/* own packets are not to be aggregated */
+	if ((atomic_read(&bat_priv->aggregated_ogms)) && (!own_packet)) {
+		hlist_for_each_entry(forw_packet_pos, tmp_node,
+				     &bat_priv->forw_bat_list, list) {
+			if (can_aggregate_with(batman_packet,
+					       packet_len,
+					       send_time,
+					       direct_link,
+					       if_incoming,
+					       forw_packet_pos)) {
+				forw_packet_aggr = forw_packet_pos;
+				break;
+			}
+		}
+	}
+
+	/* nothing to aggregate with - either aggregation disabled or no
+	 * suitable aggregation packet found */
+	if (!forw_packet_aggr) {
+		/* the following section can run without the lock */
+		spin_unlock_bh(&bat_priv->forw_bat_list_lock);
+
+		/**
+		 * if we could not aggregate this packet with one of the others
+		 * we hold it back for a while, so that it might be aggregated
+		 * later on
+		 */
+		if ((!own_packet) &&
+		    (atomic_read(&bat_priv->aggregated_ogms)))
+			send_time += msecs_to_jiffies(MAX_AGGREGATION_MS);
+
+		new_aggregated_packet(packet_buff, packet_len,
+				      send_time, direct_link,
+				      if_incoming, own_packet);
+	} else {
+		aggregate(forw_packet_aggr,
+			  packet_buff, packet_len,
+			  direct_link);
+		spin_unlock_bh(&bat_priv->forw_bat_list_lock);
+	}
+}
+
+/* unpack the aggregated packets and process them one by one */
+void receive_aggr_bat_packet(struct ethhdr *ethhdr, unsigned char *packet_buff,
+			     int packet_len, struct batman_if *if_incoming)
+{
+	struct batman_packet *batman_packet;
+	int buff_pos = 0;
+	unsigned char *hna_buff;
+
+	batman_packet = (struct batman_packet *)packet_buff;
+
+	do {
+		/* network to host order for our 32bit seqno, and the
+		   orig_interval. */
+		batman_packet->seqno = ntohl(batman_packet->seqno);
+
+		hna_buff = packet_buff + buff_pos + BAT_PACKET_LEN;
+		receive_bat_packet(ethhdr, batman_packet,
+				   hna_buff, hna_len(batman_packet),
+				   if_incoming);
+
+		buff_pos += BAT_PACKET_LEN + hna_len(batman_packet);
+		batman_packet = (struct batman_packet *)
+			(packet_buff + buff_pos);
+	} while (aggregated_packet(buff_pos, packet_len,
+				   batman_packet->num_hna));
+}
diff --git a/net/batman-adv/aggregation.h b/net/batman-adv/aggregation.h
new file mode 100644
index 00000000000..71a91b3da91
--- /dev/null
+++ b/net/batman-adv/aggregation.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_AGGREGATION_H_
+#define _NET_BATMAN_ADV_AGGREGATION_H_
+
+#include "main.h"
+
+/* is there another aggregated packet here? */
+static inline int aggregated_packet(int buff_pos, int packet_len, int num_hna)
+{
+	int next_buff_pos = buff_pos + BAT_PACKET_LEN + (num_hna * ETH_ALEN);
+
+	return (next_buff_pos <= packet_len) &&
+		(next_buff_pos <= MAX_AGGREGATION_BYTES);
+}
+
+void add_bat_packet_to_list(struct bat_priv *bat_priv,
+			    unsigned char *packet_buff, int packet_len,
+			    struct batman_if *if_incoming, char own_packet,
+			    unsigned long send_time);
+void receive_aggr_bat_packet(struct ethhdr *ethhdr, unsigned char *packet_buff,
+			     int packet_len, struct batman_if *if_incoming);
+
+#endif /* _NET_BATMAN_ADV_AGGREGATION_H_ */
diff --git a/net/batman-adv/bat_debugfs.c b/net/batman-adv/bat_debugfs.c
new file mode 100644
index 00000000000..0ae81d07f10
--- /dev/null
+++ b/net/batman-adv/bat_debugfs.c
@@ -0,0 +1,360 @@
+/*
+ * Copyright (C) 2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+
+#include <linux/debugfs.h>
+
+#include "bat_debugfs.h"
+#include "translation-table.h"
+#include "originator.h"
+#include "hard-interface.h"
+#include "gateway_common.h"
+#include "gateway_client.h"
+#include "soft-interface.h"
+#include "vis.h"
+#include "icmp_socket.h"
+
+static struct dentry *bat_debugfs;
+
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+#define LOG_BUFF_MASK (log_buff_len-1)
+#define LOG_BUFF(idx) (debug_log->log_buff[(idx) & LOG_BUFF_MASK])
+
+static int log_buff_len = LOG_BUF_LEN;
+
+static void emit_log_char(struct debug_log *debug_log, char c)
+{
+	LOG_BUFF(debug_log->log_end) = c;
+	debug_log->log_end++;
+
+	if (debug_log->log_end - debug_log->log_start > log_buff_len)
+		debug_log->log_start = debug_log->log_end - log_buff_len;
+}
+
+static int fdebug_log(struct debug_log *debug_log, char *fmt, ...)
+{
+	int printed_len;
+	va_list args;
+	static char debug_log_buf[256];
+	char *p;
+
+	if (!debug_log)
+		return 0;
+
+	spin_lock_bh(&debug_log->lock);
+	va_start(args, fmt);
+	printed_len = vscnprintf(debug_log_buf, sizeof(debug_log_buf),
+				 fmt, args);
+	va_end(args);
+
+	for (p = debug_log_buf; *p != 0; p++)
+		emit_log_char(debug_log, *p);
+
+	spin_unlock_bh(&debug_log->lock);
+
+	wake_up(&debug_log->queue_wait);
+
+	return 0;
+}
+
+int debug_log(struct bat_priv *bat_priv, char *fmt, ...)
+{
+	va_list args;
+	char tmp_log_buf[256];
+
+	va_start(args, fmt);
+	vscnprintf(tmp_log_buf, sizeof(tmp_log_buf), fmt, args);
+	fdebug_log(bat_priv->debug_log, "[%10u] %s",
+		   (jiffies / HZ), tmp_log_buf);
+	va_end(args);
+
+	return 0;
+}
+
+static int log_open(struct inode *inode, struct file *file)
+{
+	nonseekable_open(inode, file);
+	file->private_data = inode->i_private;
+	inc_module_count();
+	return 0;
+}
+
+static int log_release(struct inode *inode, struct file *file)
+{
+	dec_module_count();
+	return 0;
+}
+
+static ssize_t log_read(struct file *file, char __user *buf,
+			size_t count, loff_t *ppos)
+{
+	struct bat_priv *bat_priv = file->private_data;
+	struct debug_log *debug_log = bat_priv->debug_log;
+	int error, i = 0;
+	char c;
+
+	if ((file->f_flags & O_NONBLOCK) &&
+	    !(debug_log->log_end - debug_log->log_start))
+		return -EAGAIN;
+
+	if ((!buf) || (count < 0))
+		return -EINVAL;
+
+	if (count == 0)
+		return 0;
+
+	if (!access_ok(VERIFY_WRITE, buf, count))
+		return -EFAULT;
+
+	error = wait_event_interruptible(debug_log->queue_wait,
+				(debug_log->log_start - debug_log->log_end));
+
+	if (error)
+		return error;
+
+	spin_lock_bh(&debug_log->lock);
+
+	while ((!error) && (i < count) &&
+	       (debug_log->log_start != debug_log->log_end)) {
+		c = LOG_BUFF(debug_log->log_start);
+
+		debug_log->log_start++;
+
+		spin_unlock_bh(&debug_log->lock);
+
+		error = __put_user(c, buf);
+
+		spin_lock_bh(&debug_log->lock);
+
+		buf++;
+		i++;
+
+	}
+
+	spin_unlock_bh(&debug_log->lock);
+
+	if (!error)
+		return i;
+
+	return error;
+}
+
+static unsigned int log_poll(struct file *file, poll_table *wait)
+{
+	struct bat_priv *bat_priv = file->private_data;
+	struct debug_log *debug_log = bat_priv->debug_log;
+
+	poll_wait(file, &debug_log->queue_wait, wait);
+
+	if (debug_log->log_end - debug_log->log_start)
+		return POLLIN | POLLRDNORM;
+
+	return 0;
+}
+
+static const struct file_operations log_fops = {
+	.open           = log_open,
+	.release        = log_release,
+	.read           = log_read,
+	.poll           = log_poll,
+	.llseek         = no_llseek,
+};
+
+static int debug_log_setup(struct bat_priv *bat_priv)
+{
+	struct dentry *d;
+
+	if (!bat_priv->debug_dir)
+		goto err;
+
+	bat_priv->debug_log = kzalloc(sizeof(struct debug_log), GFP_ATOMIC);
+	if (!bat_priv->debug_log)
+		goto err;
+
+	spin_lock_init(&bat_priv->debug_log->lock);
+	init_waitqueue_head(&bat_priv->debug_log->queue_wait);
+
+	d = debugfs_create_file("log", S_IFREG | S_IRUSR,
+				bat_priv->debug_dir, bat_priv, &log_fops);
+	if (d)
+		goto err;
+
+	return 0;
+
+err:
+	return 1;
+}
+
+static void debug_log_cleanup(struct bat_priv *bat_priv)
+{
+	kfree(bat_priv->debug_log);
+	bat_priv->debug_log = NULL;
+}
+#else /* CONFIG_BATMAN_ADV_DEBUG */
+static int debug_log_setup(struct bat_priv *bat_priv)
+{
+	bat_priv->debug_log = NULL;
+	return 0;
+}
+
+static void debug_log_cleanup(struct bat_priv *bat_priv)
+{
+	return;
+}
+#endif
+
+static int originators_open(struct inode *inode, struct file *file)
+{
+	struct net_device *net_dev = (struct net_device *)inode->i_private;
+	return single_open(file, orig_seq_print_text, net_dev);
+}
+
+static int gateways_open(struct inode *inode, struct file *file)
+{
+	struct net_device *net_dev = (struct net_device *)inode->i_private;
+	return single_open(file, gw_client_seq_print_text, net_dev);
+}
+
+static int softif_neigh_open(struct inode *inode, struct file *file)
+{
+	struct net_device *net_dev = (struct net_device *)inode->i_private;
+	return single_open(file, softif_neigh_seq_print_text, net_dev);
+}
+
+static int transtable_global_open(struct inode *inode, struct file *file)
+{
+	struct net_device *net_dev = (struct net_device *)inode->i_private;
+	return single_open(file, hna_global_seq_print_text, net_dev);
+}
+
+static int transtable_local_open(struct inode *inode, struct file *file)
+{
+	struct net_device *net_dev = (struct net_device *)inode->i_private;
+	return single_open(file, hna_local_seq_print_text, net_dev);
+}
+
+static int vis_data_open(struct inode *inode, struct file *file)
+{
+	struct net_device *net_dev = (struct net_device *)inode->i_private;
+	return single_open(file, vis_seq_print_text, net_dev);
+}
+
+struct bat_debuginfo {
+	struct attribute attr;
+	const struct file_operations fops;
+};
+
+#define BAT_DEBUGINFO(_name, _mode, _open)	\
+struct bat_debuginfo bat_debuginfo_##_name = {	\
+	.attr = { .name = __stringify(_name),	\
+		  .mode = _mode, },		\
+	.fops = { .owner = THIS_MODULE,		\
+		  .open = _open,		\
+		  .read	= seq_read,		\
+		  .llseek = seq_lseek,		\
+		  .release = single_release,	\
+		}				\
+};
+
+static BAT_DEBUGINFO(originators, S_IRUGO, originators_open);
+static BAT_DEBUGINFO(gateways, S_IRUGO, gateways_open);
+static BAT_DEBUGINFO(softif_neigh, S_IRUGO, softif_neigh_open);
+static BAT_DEBUGINFO(transtable_global, S_IRUGO, transtable_global_open);
+static BAT_DEBUGINFO(transtable_local, S_IRUGO, transtable_local_open);
+static BAT_DEBUGINFO(vis_data, S_IRUGO, vis_data_open);
+
+static struct bat_debuginfo *mesh_debuginfos[] = {
+	&bat_debuginfo_originators,
+	&bat_debuginfo_gateways,
+	&bat_debuginfo_softif_neigh,
+	&bat_debuginfo_transtable_global,
+	&bat_debuginfo_transtable_local,
+	&bat_debuginfo_vis_data,
+	NULL,
+};
+
+void debugfs_init(void)
+{
+	bat_debugfs = debugfs_create_dir(DEBUGFS_BAT_SUBDIR, NULL);
+	if (bat_debugfs == ERR_PTR(-ENODEV))
+		bat_debugfs = NULL;
+}
+
+void debugfs_destroy(void)
+{
+	if (bat_debugfs) {
+		debugfs_remove_recursive(bat_debugfs);
+		bat_debugfs = NULL;
+	}
+}
+
+int debugfs_add_meshif(struct net_device *dev)
+{
+	struct bat_priv *bat_priv = netdev_priv(dev);
+	struct bat_debuginfo **bat_debug;
+	struct dentry *file;
+
+	if (!bat_debugfs)
+		goto out;
+
+	bat_priv->debug_dir = debugfs_create_dir(dev->name, bat_debugfs);
+	if (!bat_priv->debug_dir)
+		goto out;
+
+	bat_socket_setup(bat_priv);
+	debug_log_setup(bat_priv);
+
+	for (bat_debug = mesh_debuginfos; *bat_debug; ++bat_debug) {
+		file = debugfs_create_file(((*bat_debug)->attr).name,
+					  S_IFREG | ((*bat_debug)->attr).mode,
+					  bat_priv->debug_dir,
+					  dev, &(*bat_debug)->fops);
+		if (!file) {
+			bat_err(dev, "Can't add debugfs file: %s/%s\n",
+				dev->name, ((*bat_debug)->attr).name);
+			goto rem_attr;
+		}
+	}
+
+	return 0;
+rem_attr:
+	debugfs_remove_recursive(bat_priv->debug_dir);
+	bat_priv->debug_dir = NULL;
+out:
+#ifdef CONFIG_DEBUG_FS
+	return -ENOMEM;
+#else
+	return 0;
+#endif /* CONFIG_DEBUG_FS */
+}
+
+void debugfs_del_meshif(struct net_device *dev)
+{
+	struct bat_priv *bat_priv = netdev_priv(dev);
+
+	debug_log_cleanup(bat_priv);
+
+	if (bat_debugfs) {
+		debugfs_remove_recursive(bat_priv->debug_dir);
+		bat_priv->debug_dir = NULL;
+	}
+}
diff --git a/net/batman-adv/bat_debugfs.h b/net/batman-adv/bat_debugfs.h
new file mode 100644
index 00000000000..72df532b7d5
--- /dev/null
+++ b/net/batman-adv/bat_debugfs.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) 2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+
+#ifndef _NET_BATMAN_ADV_DEBUGFS_H_
+#define _NET_BATMAN_ADV_DEBUGFS_H_
+
+#define DEBUGFS_BAT_SUBDIR "batman_adv"
+
+void debugfs_init(void);
+void debugfs_destroy(void);
+int debugfs_add_meshif(struct net_device *dev);
+void debugfs_del_meshif(struct net_device *dev);
+
+#endif /* _NET_BATMAN_ADV_DEBUGFS_H_ */
diff --git a/net/batman-adv/bat_sysfs.c b/net/batman-adv/bat_sysfs.c
new file mode 100644
index 00000000000..cd7bb51825f
--- /dev/null
+++ b/net/batman-adv/bat_sysfs.c
@@ -0,0 +1,593 @@
+/*
+ * Copyright (C) 2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "bat_sysfs.h"
+#include "translation-table.h"
+#include "originator.h"
+#include "hard-interface.h"
+#include "gateway_common.h"
+#include "gateway_client.h"
+#include "vis.h"
+
+#define to_dev(obj)		container_of(obj, struct device, kobj)
+#define kobj_to_netdev(obj)	to_net_dev(to_dev(obj->parent))
+#define kobj_to_batpriv(obj)	netdev_priv(kobj_to_netdev(obj))
+
+/* Use this, if you have customized show and store functions */
+#define BAT_ATTR(_name, _mode, _show, _store)	\
+struct bat_attribute bat_attr_##_name = {	\
+	.attr = {.name = __stringify(_name),	\
+		 .mode = _mode },		\
+	.show   = _show,			\
+	.store  = _store,			\
+};
+
+#define BAT_ATTR_STORE_BOOL(_name, _post_func)				\
+ssize_t store_##_name(struct kobject *kobj, struct attribute *attr,	\
+		      char *buff, size_t count)				\
+{									\
+	struct net_device *net_dev = kobj_to_netdev(kobj);		\
+	struct bat_priv *bat_priv = netdev_priv(net_dev);		\
+	return __store_bool_attr(buff, count, _post_func, attr,		\
+				 &bat_priv->_name, net_dev);		\
+}
+
+#define BAT_ATTR_SHOW_BOOL(_name)					\
+ssize_t show_##_name(struct kobject *kobj, struct attribute *attr,	\
+			    char *buff)					\
+{									\
+	struct bat_priv *bat_priv = kobj_to_batpriv(kobj);		\
+	return sprintf(buff, "%s\n",					\
+		       atomic_read(&bat_priv->_name) == 0 ?		\
+		       "disabled" : "enabled");				\
+}									\
+
+/* Use this, if you are going to turn a [name] in bat_priv on or off */
+#define BAT_ATTR_BOOL(_name, _mode, _post_func)				\
+	static BAT_ATTR_STORE_BOOL(_name, _post_func)			\
+	static BAT_ATTR_SHOW_BOOL(_name)				\
+	static BAT_ATTR(_name, _mode, show_##_name, store_##_name)
+
+
+#define BAT_ATTR_STORE_UINT(_name, _min, _max, _post_func)		\
+ssize_t store_##_name(struct kobject *kobj, struct attribute *attr,	\
+			     char *buff, size_t count)			\
+{									\
+	struct net_device *net_dev = kobj_to_netdev(kobj);		\
+	struct bat_priv *bat_priv = netdev_priv(net_dev);		\
+	return __store_uint_attr(buff, count, _min, _max, _post_func,	\
+				 attr, &bat_priv->_name, net_dev);	\
+}
+
+#define BAT_ATTR_SHOW_UINT(_name)					\
+ssize_t show_##_name(struct kobject *kobj, struct attribute *attr,	\
+			    char *buff)					\
+{									\
+	struct bat_priv *bat_priv = kobj_to_batpriv(kobj);		\
+	return sprintf(buff, "%i\n", atomic_read(&bat_priv->_name));	\
+}									\
+
+/* Use this, if you are going to set [name] in bat_priv to unsigned integer
+ * values only */
+#define BAT_ATTR_UINT(_name, _mode, _min, _max, _post_func)		\
+	static BAT_ATTR_STORE_UINT(_name, _min, _max, _post_func)	\
+	static BAT_ATTR_SHOW_UINT(_name)				\
+	static BAT_ATTR(_name, _mode, show_##_name, store_##_name)
+
+
+static int store_bool_attr(char *buff, size_t count,
+			   struct net_device *net_dev,
+			   char *attr_name, atomic_t *attr)
+{
+	int enabled = -1;
+
+	if (buff[count - 1] == '\n')
+		buff[count - 1] = '\0';
+
+	if ((strncmp(buff, "1", 2) == 0) ||
+	    (strncmp(buff, "enable", 7) == 0) ||
+	    (strncmp(buff, "enabled", 8) == 0))
+		enabled = 1;
+
+	if ((strncmp(buff, "0", 2) == 0) ||
+	    (strncmp(buff, "disable", 8) == 0) ||
+	    (strncmp(buff, "disabled", 9) == 0))
+		enabled = 0;
+
+	if (enabled < 0) {
+		bat_info(net_dev,
+			 "%s: Invalid parameter received: %s\n",
+			 attr_name, buff);
+		return -EINVAL;
+	}
+
+	if (atomic_read(attr) == enabled)
+		return count;
+
+	bat_info(net_dev, "%s: Changing from: %s to: %s\n", attr_name,
+		 atomic_read(attr) == 1 ? "enabled" : "disabled",
+		 enabled == 1 ? "enabled" : "disabled");
+
+	atomic_set(attr, (unsigned)enabled);
+	return count;
+}
+
+static inline ssize_t __store_bool_attr(char *buff, size_t count,
+			void (*post_func)(struct net_device *),
+			struct attribute *attr,
+			atomic_t *attr_store, struct net_device *net_dev)
+{
+	int ret;
+
+	ret = store_bool_attr(buff, count, net_dev, (char *)attr->name,
+			      attr_store);
+	if (post_func && ret)
+		post_func(net_dev);
+
+	return ret;
+}
+
+static int store_uint_attr(char *buff, size_t count,
+			   struct net_device *net_dev, char *attr_name,
+			   unsigned int min, unsigned int max, atomic_t *attr)
+{
+	unsigned long uint_val;
+	int ret;
+
+	ret = strict_strtoul(buff, 10, &uint_val);
+	if (ret) {
+		bat_info(net_dev,
+			 "%s: Invalid parameter received: %s\n",
+			 attr_name, buff);
+		return -EINVAL;
+	}
+
+	if (uint_val < min) {
+		bat_info(net_dev, "%s: Value is too small: %lu min: %u\n",
+			 attr_name, uint_val, min);
+		return -EINVAL;
+	}
+
+	if (uint_val > max) {
+		bat_info(net_dev, "%s: Value is too big: %lu max: %u\n",
+			 attr_name, uint_val, max);
+		return -EINVAL;
+	}
+
+	if (atomic_read(attr) == uint_val)
+		return count;
+
+	bat_info(net_dev, "%s: Changing from: %i to: %lu\n",
+		 attr_name, atomic_read(attr), uint_val);
+
+	atomic_set(attr, uint_val);
+	return count;
+}
+
+static inline ssize_t __store_uint_attr(char *buff, size_t count,
+			int min, int max,
+			void (*post_func)(struct net_device *),
+			struct attribute *attr,
+			atomic_t *attr_store, struct net_device *net_dev)
+{
+	int ret;
+
+	ret = store_uint_attr(buff, count, net_dev, (char *)attr->name,
+			      min, max, attr_store);
+	if (post_func && ret)
+		post_func(net_dev);
+
+	return ret;
+}
+
+static ssize_t show_vis_mode(struct kobject *kobj, struct attribute *attr,
+			     char *buff)
+{
+	struct bat_priv *bat_priv = kobj_to_batpriv(kobj);
+	int vis_mode = atomic_read(&bat_priv->vis_mode);
+
+	return sprintf(buff, "%s\n",
+		       vis_mode == VIS_TYPE_CLIENT_UPDATE ?
+							"client" : "server");
+}
+
+static ssize_t store_vis_mode(struct kobject *kobj, struct attribute *attr,
+			      char *buff, size_t count)
+{
+	struct net_device *net_dev = kobj_to_netdev(kobj);
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	unsigned long val;
+	int ret, vis_mode_tmp = -1;
+
+	ret = strict_strtoul(buff, 10, &val);
+
+	if (((count == 2) && (!ret) && (val == VIS_TYPE_CLIENT_UPDATE)) ||
+	    (strncmp(buff, "client", 6) == 0) ||
+	    (strncmp(buff, "off", 3) == 0))
+		vis_mode_tmp = VIS_TYPE_CLIENT_UPDATE;
+
+	if (((count == 2) && (!ret) && (val == VIS_TYPE_SERVER_SYNC)) ||
+	    (strncmp(buff, "server", 6) == 0))
+		vis_mode_tmp = VIS_TYPE_SERVER_SYNC;
+
+	if (vis_mode_tmp < 0) {
+		if (buff[count - 1] == '\n')
+			buff[count - 1] = '\0';
+
+		bat_info(net_dev,
+			 "Invalid parameter for 'vis mode' setting received: "
+			 "%s\n", buff);
+		return -EINVAL;
+	}
+
+	if (atomic_read(&bat_priv->vis_mode) == vis_mode_tmp)
+		return count;
+
+	bat_info(net_dev, "Changing vis mode from: %s to: %s\n",
+		 atomic_read(&bat_priv->vis_mode) == VIS_TYPE_CLIENT_UPDATE ?
+		 "client" : "server", vis_mode_tmp == VIS_TYPE_CLIENT_UPDATE ?
+		 "client" : "server");
+
+	atomic_set(&bat_priv->vis_mode, (unsigned)vis_mode_tmp);
+	return count;
+}
+
+static void post_gw_deselect(struct net_device *net_dev)
+{
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	gw_deselect(bat_priv);
+}
+
+static ssize_t show_gw_mode(struct kobject *kobj, struct attribute *attr,
+			    char *buff)
+{
+	struct bat_priv *bat_priv = kobj_to_batpriv(kobj);
+	int bytes_written;
+
+	switch (atomic_read(&bat_priv->gw_mode)) {
+	case GW_MODE_CLIENT:
+		bytes_written = sprintf(buff, "%s\n", GW_MODE_CLIENT_NAME);
+		break;
+	case GW_MODE_SERVER:
+		bytes_written = sprintf(buff, "%s\n", GW_MODE_SERVER_NAME);
+		break;
+	default:
+		bytes_written = sprintf(buff, "%s\n", GW_MODE_OFF_NAME);
+		break;
+	}
+
+	return bytes_written;
+}
+
+static ssize_t store_gw_mode(struct kobject *kobj, struct attribute *attr,
+			     char *buff, size_t count)
+{
+	struct net_device *net_dev = kobj_to_netdev(kobj);
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	char *curr_gw_mode_str;
+	int gw_mode_tmp = -1;
+
+	if (buff[count - 1] == '\n')
+		buff[count - 1] = '\0';
+
+	if (strncmp(buff, GW_MODE_OFF_NAME, strlen(GW_MODE_OFF_NAME)) == 0)
+		gw_mode_tmp = GW_MODE_OFF;
+
+	if (strncmp(buff, GW_MODE_CLIENT_NAME,
+		   strlen(GW_MODE_CLIENT_NAME)) == 0)
+		gw_mode_tmp = GW_MODE_CLIENT;
+
+	if (strncmp(buff, GW_MODE_SERVER_NAME,
+		   strlen(GW_MODE_SERVER_NAME)) == 0)
+		gw_mode_tmp = GW_MODE_SERVER;
+
+	if (gw_mode_tmp < 0) {
+		bat_info(net_dev,
+			 "Invalid parameter for 'gw mode' setting received: "
+			 "%s\n", buff);
+		return -EINVAL;
+	}
+
+	if (atomic_read(&bat_priv->gw_mode) == gw_mode_tmp)
+		return count;
+
+	switch (atomic_read(&bat_priv->gw_mode)) {
+	case GW_MODE_CLIENT:
+		curr_gw_mode_str = GW_MODE_CLIENT_NAME;
+		break;
+	case GW_MODE_SERVER:
+		curr_gw_mode_str = GW_MODE_SERVER_NAME;
+		break;
+	default:
+		curr_gw_mode_str = GW_MODE_OFF_NAME;
+		break;
+	}
+
+	bat_info(net_dev, "Changing gw mode from: %s to: %s\n",
+		 curr_gw_mode_str, buff);
+
+	gw_deselect(bat_priv);
+	atomic_set(&bat_priv->gw_mode, (unsigned)gw_mode_tmp);
+	return count;
+}
+
+static ssize_t show_gw_bwidth(struct kobject *kobj, struct attribute *attr,
+			      char *buff)
+{
+	struct bat_priv *bat_priv = kobj_to_batpriv(kobj);
+	int down, up;
+	int gw_bandwidth = atomic_read(&bat_priv->gw_bandwidth);
+
+	gw_bandwidth_to_kbit(gw_bandwidth, &down, &up);
+	return sprintf(buff, "%i%s/%i%s\n",
+		       (down > 2048 ? down / 1024 : down),
+		       (down > 2048 ? "MBit" : "KBit"),
+		       (up > 2048 ? up / 1024 : up),
+		       (up > 2048 ? "MBit" : "KBit"));
+}
+
+static ssize_t store_gw_bwidth(struct kobject *kobj, struct attribute *attr,
+			       char *buff, size_t count)
+{
+	struct net_device *net_dev = kobj_to_netdev(kobj);
+
+	if (buff[count - 1] == '\n')
+		buff[count - 1] = '\0';
+
+	return gw_bandwidth_set(net_dev, buff, count);
+}
+
+BAT_ATTR_BOOL(aggregated_ogms, S_IRUGO | S_IWUSR, NULL);
+BAT_ATTR_BOOL(bonding, S_IRUGO | S_IWUSR, NULL);
+BAT_ATTR_BOOL(fragmentation, S_IRUGO | S_IWUSR, update_min_mtu);
+static BAT_ATTR(vis_mode, S_IRUGO | S_IWUSR, show_vis_mode, store_vis_mode);
+static BAT_ATTR(gw_mode, S_IRUGO | S_IWUSR, show_gw_mode, store_gw_mode);
+BAT_ATTR_UINT(orig_interval, S_IRUGO | S_IWUSR, 2 * JITTER, INT_MAX, NULL);
+BAT_ATTR_UINT(hop_penalty, S_IRUGO | S_IWUSR, 0, TQ_MAX_VALUE, NULL);
+BAT_ATTR_UINT(gw_sel_class, S_IRUGO | S_IWUSR, 1, TQ_MAX_VALUE,
+	      post_gw_deselect);
+static BAT_ATTR(gw_bandwidth, S_IRUGO | S_IWUSR, show_gw_bwidth,
+		store_gw_bwidth);
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+BAT_ATTR_UINT(log_level, S_IRUGO | S_IWUSR, 0, 3, NULL);
+#endif
+
+static struct bat_attribute *mesh_attrs[] = {
+	&bat_attr_aggregated_ogms,
+	&bat_attr_bonding,
+	&bat_attr_fragmentation,
+	&bat_attr_vis_mode,
+	&bat_attr_gw_mode,
+	&bat_attr_orig_interval,
+	&bat_attr_hop_penalty,
+	&bat_attr_gw_sel_class,
+	&bat_attr_gw_bandwidth,
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	&bat_attr_log_level,
+#endif
+	NULL,
+};
+
+int sysfs_add_meshif(struct net_device *dev)
+{
+	struct kobject *batif_kobject = &dev->dev.kobj;
+	struct bat_priv *bat_priv = netdev_priv(dev);
+	struct bat_attribute **bat_attr;
+	int err;
+
+	bat_priv->mesh_obj = kobject_create_and_add(SYSFS_IF_MESH_SUBDIR,
+						    batif_kobject);
+	if (!bat_priv->mesh_obj) {
+		bat_err(dev, "Can't add sysfs directory: %s/%s\n", dev->name,
+			SYSFS_IF_MESH_SUBDIR);
+		goto out;
+	}
+
+	for (bat_attr = mesh_attrs; *bat_attr; ++bat_attr) {
+		err = sysfs_create_file(bat_priv->mesh_obj,
+					&((*bat_attr)->attr));
+		if (err) {
+			bat_err(dev, "Can't add sysfs file: %s/%s/%s\n",
+				dev->name, SYSFS_IF_MESH_SUBDIR,
+				((*bat_attr)->attr).name);
+			goto rem_attr;
+		}
+	}
+
+	return 0;
+
+rem_attr:
+	for (bat_attr = mesh_attrs; *bat_attr; ++bat_attr)
+		sysfs_remove_file(bat_priv->mesh_obj, &((*bat_attr)->attr));
+
+	kobject_put(bat_priv->mesh_obj);
+	bat_priv->mesh_obj = NULL;
+out:
+	return -ENOMEM;
+}
+
+void sysfs_del_meshif(struct net_device *dev)
+{
+	struct bat_priv *bat_priv = netdev_priv(dev);
+	struct bat_attribute **bat_attr;
+
+	for (bat_attr = mesh_attrs; *bat_attr; ++bat_attr)
+		sysfs_remove_file(bat_priv->mesh_obj, &((*bat_attr)->attr));
+
+	kobject_put(bat_priv->mesh_obj);
+	bat_priv->mesh_obj = NULL;
+}
+
+static ssize_t show_mesh_iface(struct kobject *kobj, struct attribute *attr,
+			       char *buff)
+{
+	struct net_device *net_dev = kobj_to_netdev(kobj);
+	struct batman_if *batman_if = get_batman_if_by_netdev(net_dev);
+	ssize_t length;
+
+	if (!batman_if)
+		return 0;
+
+	length = sprintf(buff, "%s\n", batman_if->if_status == IF_NOT_IN_USE ?
+			 "none" : batman_if->soft_iface->name);
+
+	kref_put(&batman_if->refcount, hardif_free_ref);
+
+	return length;
+}
+
+static ssize_t store_mesh_iface(struct kobject *kobj, struct attribute *attr,
+				char *buff, size_t count)
+{
+	struct net_device *net_dev = kobj_to_netdev(kobj);
+	struct batman_if *batman_if = get_batman_if_by_netdev(net_dev);
+	int status_tmp = -1;
+	int ret;
+
+	if (!batman_if)
+		return count;
+
+	if (buff[count - 1] == '\n')
+		buff[count - 1] = '\0';
+
+	if (strlen(buff) >= IFNAMSIZ) {
+		pr_err("Invalid parameter for 'mesh_iface' setting received: "
+		       "interface name too long '%s'\n", buff);
+		kref_put(&batman_if->refcount, hardif_free_ref);
+		return -EINVAL;
+	}
+
+	if (strncmp(buff, "none", 4) == 0)
+		status_tmp = IF_NOT_IN_USE;
+	else
+		status_tmp = IF_I_WANT_YOU;
+
+	if ((batman_if->if_status == status_tmp) || ((batman_if->soft_iface) &&
+	    (strncmp(batman_if->soft_iface->name, buff, IFNAMSIZ) == 0))) {
+		kref_put(&batman_if->refcount, hardif_free_ref);
+		return count;
+	}
+
+	if (status_tmp == IF_NOT_IN_USE) {
+		rtnl_lock();
+		hardif_disable_interface(batman_if);
+		rtnl_unlock();
+		kref_put(&batman_if->refcount, hardif_free_ref);
+		return count;
+	}
+
+	/* if the interface already is in use */
+	if (batman_if->if_status != IF_NOT_IN_USE) {
+		rtnl_lock();
+		hardif_disable_interface(batman_if);
+		rtnl_unlock();
+	}
+
+	ret = hardif_enable_interface(batman_if, buff);
+	kref_put(&batman_if->refcount, hardif_free_ref);
+
+	return ret;
+}
+
+static ssize_t show_iface_status(struct kobject *kobj, struct attribute *attr,
+				 char *buff)
+{
+	struct net_device *net_dev = kobj_to_netdev(kobj);
+	struct batman_if *batman_if = get_batman_if_by_netdev(net_dev);
+	ssize_t length;
+
+	if (!batman_if)
+		return 0;
+
+	switch (batman_if->if_status) {
+	case IF_TO_BE_REMOVED:
+		length = sprintf(buff, "disabling\n");
+		break;
+	case IF_INACTIVE:
+		length = sprintf(buff, "inactive\n");
+		break;
+	case IF_ACTIVE:
+		length = sprintf(buff, "active\n");
+		break;
+	case IF_TO_BE_ACTIVATED:
+		length = sprintf(buff, "enabling\n");
+		break;
+	case IF_NOT_IN_USE:
+	default:
+		length = sprintf(buff, "not in use\n");
+		break;
+	}
+
+	kref_put(&batman_if->refcount, hardif_free_ref);
+
+	return length;
+}
+
+static BAT_ATTR(mesh_iface, S_IRUGO | S_IWUSR,
+		show_mesh_iface, store_mesh_iface);
+static BAT_ATTR(iface_status, S_IRUGO, show_iface_status, NULL);
+
+static struct bat_attribute *batman_attrs[] = {
+	&bat_attr_mesh_iface,
+	&bat_attr_iface_status,
+	NULL,
+};
+
+int sysfs_add_hardif(struct kobject **hardif_obj, struct net_device *dev)
+{
+	struct kobject *hardif_kobject = &dev->dev.kobj;
+	struct bat_attribute **bat_attr;
+	int err;
+
+	*hardif_obj = kobject_create_and_add(SYSFS_IF_BAT_SUBDIR,
+						    hardif_kobject);
+
+	if (!*hardif_obj) {
+		bat_err(dev, "Can't add sysfs directory: %s/%s\n", dev->name,
+			SYSFS_IF_BAT_SUBDIR);
+		goto out;
+	}
+
+	for (bat_attr = batman_attrs; *bat_attr; ++bat_attr) {
+		err = sysfs_create_file(*hardif_obj, &((*bat_attr)->attr));
+		if (err) {
+			bat_err(dev, "Can't add sysfs file: %s/%s/%s\n",
+				dev->name, SYSFS_IF_BAT_SUBDIR,
+				((*bat_attr)->attr).name);
+			goto rem_attr;
+		}
+	}
+
+	return 0;
+
+rem_attr:
+	for (bat_attr = batman_attrs; *bat_attr; ++bat_attr)
+		sysfs_remove_file(*hardif_obj, &((*bat_attr)->attr));
+out:
+	return -ENOMEM;
+}
+
+void sysfs_del_hardif(struct kobject **hardif_obj)
+{
+	kobject_put(*hardif_obj);
+	*hardif_obj = NULL;
+}
diff --git a/net/batman-adv/bat_sysfs.h b/net/batman-adv/bat_sysfs.h
new file mode 100644
index 00000000000..7f186c007b4
--- /dev/null
+++ b/net/batman-adv/bat_sysfs.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+
+#ifndef _NET_BATMAN_ADV_SYSFS_H_
+#define _NET_BATMAN_ADV_SYSFS_H_
+
+#define SYSFS_IF_MESH_SUBDIR "mesh"
+#define SYSFS_IF_BAT_SUBDIR "batman_adv"
+
+struct bat_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct kobject *kobj, struct attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct kobject *kobj, struct attribute *attr,
+			 char *buf, size_t count);
+};
+
+int sysfs_add_meshif(struct net_device *dev);
+void sysfs_del_meshif(struct net_device *dev);
+int sysfs_add_hardif(struct kobject **hardif_obj, struct net_device *dev);
+void sysfs_del_hardif(struct kobject **hardif_obj);
+
+#endif /* _NET_BATMAN_ADV_SYSFS_H_ */
diff --git a/net/batman-adv/bitarray.c b/net/batman-adv/bitarray.c
new file mode 100644
index 00000000000..bbcd8f744cd
--- /dev/null
+++ b/net/batman-adv/bitarray.c
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2006-2010 B.A.T.M.A.N. contributors:
+ *
+ * Simon Wunderlich, Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "bitarray.h"
+
+#include <linux/bitops.h>
+
+/* returns true if the corresponding bit in the given seq_bits indicates true
+ * and curr_seqno is within range of last_seqno */
+uint8_t get_bit_status(unsigned long *seq_bits, uint32_t last_seqno,
+		       uint32_t curr_seqno)
+{
+	int32_t diff, word_offset, word_num;
+
+	diff = last_seqno - curr_seqno;
+	if (diff < 0 || diff >= TQ_LOCAL_WINDOW_SIZE) {
+		return 0;
+	} else {
+		/* which word */
+		word_num = (last_seqno - curr_seqno) / WORD_BIT_SIZE;
+		/* which position in the selected word */
+		word_offset = (last_seqno - curr_seqno) % WORD_BIT_SIZE;
+
+		if (test_bit(word_offset, &seq_bits[word_num]))
+			return 1;
+		else
+			return 0;
+	}
+}
+
+/* turn corresponding bit on, so we can remember that we got the packet */
+void bit_mark(unsigned long *seq_bits, int32_t n)
+{
+	int32_t word_offset, word_num;
+
+	/* if too old, just drop it */
+	if (n < 0 || n >= TQ_LOCAL_WINDOW_SIZE)
+		return;
+
+	/* which word */
+	word_num = n / WORD_BIT_SIZE;
+	/* which position in the selected word */
+	word_offset = n % WORD_BIT_SIZE;
+
+	set_bit(word_offset, &seq_bits[word_num]); /* turn the position on */
+}
+
+/* shift the packet array by n places. */
+static void bit_shift(unsigned long *seq_bits, int32_t n)
+{
+	int32_t word_offset, word_num;
+	int32_t i;
+
+	if (n <= 0 || n >= TQ_LOCAL_WINDOW_SIZE)
+		return;
+
+	word_offset = n % WORD_BIT_SIZE;/* shift how much inside each word */
+	word_num = n / WORD_BIT_SIZE;	/* shift over how much (full) words */
+
+	for (i = NUM_WORDS - 1; i > word_num; i--) {
+		/* going from old to new, so we don't overwrite the data we copy
+		 * from.
+		 *
+		 * left is high, right is low: FEDC BA98 7654 3210
+		 *					  ^^ ^^
+		 *			       vvvv
+		 * ^^^^ = from, vvvvv =to, we'd have word_num==1 and
+		 * word_offset==WORD_BIT_SIZE/2 ????? in this example.
+		 * (=24 bits)
+		 *
+		 * our desired output would be: 9876 5432 1000 0000
+		 * */
+
+		seq_bits[i] =
+			(seq_bits[i - word_num] << word_offset) +
+			/* take the lower port from the left half, shift it left
+			 * to its final position */
+			(seq_bits[i - word_num - 1] >>
+			 (WORD_BIT_SIZE-word_offset));
+		/* and the upper part of the right half and shift it left to
+		 * it's position */
+		/* for our example that would be: word[0] = 9800 + 0076 =
+		 * 9876 */
+	}
+	/* now for our last word, i==word_num, we only have the it's "left"
+	 * half. that's the 1000 word in our example.*/
+
+	seq_bits[i] = (seq_bits[i - word_num] << word_offset);
+
+	/* pad the rest with 0, if there is anything */
+	i--;
+
+	for (; i >= 0; i--)
+		seq_bits[i] = 0;
+}
+
+static void bit_reset_window(unsigned long *seq_bits)
+{
+	int i;
+	for (i = 0; i < NUM_WORDS; i++)
+		seq_bits[i] = 0;
+}
+
+
+/* receive and process one packet within the sequence number window.
+ *
+ * returns:
+ *  1 if the window was moved (either new or very old)
+ *  0 if the window was not moved/shifted.
+ */
+char bit_get_packet(void *priv, unsigned long *seq_bits,
+		    int32_t seq_num_diff, int8_t set_mark)
+{
+	struct bat_priv *bat_priv = (struct bat_priv *)priv;
+
+	/* sequence number is slightly older. We already got a sequence number
+	 * higher than this one, so we just mark it. */
+
+	if ((seq_num_diff <= 0) && (seq_num_diff > -TQ_LOCAL_WINDOW_SIZE)) {
+		if (set_mark)
+			bit_mark(seq_bits, -seq_num_diff);
+		return 0;
+	}
+
+	/* sequence number is slightly newer, so we shift the window and
+	 * set the mark if required */
+
+	if ((seq_num_diff > 0) && (seq_num_diff < TQ_LOCAL_WINDOW_SIZE)) {
+		bit_shift(seq_bits, seq_num_diff);
+
+		if (set_mark)
+			bit_mark(seq_bits, 0);
+		return 1;
+	}
+
+	/* sequence number is much newer, probably missed a lot of packets */
+
+	if ((seq_num_diff >= TQ_LOCAL_WINDOW_SIZE)
+		|| (seq_num_diff < EXPECTED_SEQNO_RANGE)) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"We missed a lot of packets (%i) !\n",
+			seq_num_diff - 1);
+		bit_reset_window(seq_bits);
+		if (set_mark)
+			bit_mark(seq_bits, 0);
+		return 1;
+	}
+
+	/* received a much older packet. The other host either restarted
+	 * or the old packet got delayed somewhere in the network. The
+	 * packet should be dropped without calling this function if the
+	 * seqno window is protected. */
+
+	if ((seq_num_diff <= -TQ_LOCAL_WINDOW_SIZE)
+		|| (seq_num_diff >= EXPECTED_SEQNO_RANGE)) {
+
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Other host probably restarted!\n");
+
+		bit_reset_window(seq_bits);
+		if (set_mark)
+			bit_mark(seq_bits, 0);
+
+		return 1;
+	}
+
+	/* never reached */
+	return 0;
+}
+
+/* count the hamming weight, how many good packets did we receive? just count
+ * the 1's.
+ */
+int bit_packet_count(unsigned long *seq_bits)
+{
+	int i, hamming = 0;
+
+	for (i = 0; i < NUM_WORDS; i++)
+		hamming += hweight_long(seq_bits[i]);
+
+	return hamming;
+}
diff --git a/net/batman-adv/bitarray.h b/net/batman-adv/bitarray.h
new file mode 100644
index 00000000000..ac54017601b
--- /dev/null
+++ b/net/batman-adv/bitarray.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2006-2010 B.A.T.M.A.N. contributors:
+ *
+ * Simon Wunderlich, Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_BITARRAY_H_
+#define _NET_BATMAN_ADV_BITARRAY_H_
+
+#define WORD_BIT_SIZE (sizeof(unsigned long) * 8)
+
+/* returns true if the corresponding bit in the given seq_bits indicates true
+ * and curr_seqno is within range of last_seqno */
+uint8_t get_bit_status(unsigned long *seq_bits, uint32_t last_seqno,
+					   uint32_t curr_seqno);
+
+/* turn corresponding bit on, so we can remember that we got the packet */
+void bit_mark(unsigned long *seq_bits, int32_t n);
+
+
+/* receive and process one packet, returns 1 if received seq_num is considered
+ * new, 0 if old  */
+char bit_get_packet(void *priv, unsigned long *seq_bits,
+		    int32_t seq_num_diff, int8_t set_mark);
+
+/* count the hamming weight, how many good packets did we receive? */
+int  bit_packet_count(unsigned long *seq_bits);
+
+#endif /* _NET_BATMAN_ADV_BITARRAY_H_ */
diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c
new file mode 100644
index 00000000000..0065ffb8d96
--- /dev/null
+++ b/net/batman-adv/gateway_client.c
@@ -0,0 +1,477 @@
+/*
+ * Copyright (C) 2009-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "gateway_client.h"
+#include "gateway_common.h"
+#include "hard-interface.h"
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/udp.h>
+#include <linux/if_vlan.h>
+
+static void gw_node_free_ref(struct kref *refcount)
+{
+	struct gw_node *gw_node;
+
+	gw_node = container_of(refcount, struct gw_node, refcount);
+	kfree(gw_node);
+}
+
+static void gw_node_free_rcu(struct rcu_head *rcu)
+{
+	struct gw_node *gw_node;
+
+	gw_node = container_of(rcu, struct gw_node, rcu);
+	kref_put(&gw_node->refcount, gw_node_free_ref);
+}
+
+void *gw_get_selected(struct bat_priv *bat_priv)
+{
+	struct gw_node *curr_gateway_tmp = bat_priv->curr_gw;
+
+	if (!curr_gateway_tmp)
+		return NULL;
+
+	return curr_gateway_tmp->orig_node;
+}
+
+void gw_deselect(struct bat_priv *bat_priv)
+{
+	struct gw_node *gw_node = bat_priv->curr_gw;
+
+	bat_priv->curr_gw = NULL;
+
+	if (gw_node)
+		kref_put(&gw_node->refcount, gw_node_free_ref);
+}
+
+static struct gw_node *gw_select(struct bat_priv *bat_priv,
+			  struct gw_node *new_gw_node)
+{
+	struct gw_node *curr_gw_node = bat_priv->curr_gw;
+
+	if (new_gw_node)
+		kref_get(&new_gw_node->refcount);
+
+	bat_priv->curr_gw = new_gw_node;
+	return curr_gw_node;
+}
+
+void gw_election(struct bat_priv *bat_priv)
+{
+	struct hlist_node *node;
+	struct gw_node *gw_node, *curr_gw_tmp = NULL, *old_gw_node = NULL;
+	uint8_t max_tq = 0;
+	uint32_t max_gw_factor = 0, tmp_gw_factor = 0;
+	int down, up;
+
+	/**
+	 * The batman daemon checks here if we already passed a full originator
+	 * cycle in order to make sure we don't choose the first gateway we
+	 * hear about. This check is based on the daemon's uptime which we
+	 * don't have.
+	 **/
+	if (atomic_read(&bat_priv->gw_mode) != GW_MODE_CLIENT)
+		return;
+
+	if (bat_priv->curr_gw)
+		return;
+
+	rcu_read_lock();
+	if (hlist_empty(&bat_priv->gw_list)) {
+		rcu_read_unlock();
+
+		if (bat_priv->curr_gw) {
+			bat_dbg(DBG_BATMAN, bat_priv,
+				"Removing selected gateway - "
+				"no gateway in range\n");
+			gw_deselect(bat_priv);
+		}
+
+		return;
+	}
+
+	hlist_for_each_entry_rcu(gw_node, node, &bat_priv->gw_list, list) {
+		if (!gw_node->orig_node->router)
+			continue;
+
+		if (gw_node->deleted)
+			continue;
+
+		switch (atomic_read(&bat_priv->gw_sel_class)) {
+		case 1: /* fast connection */
+			gw_bandwidth_to_kbit(gw_node->orig_node->gw_flags,
+					     &down, &up);
+
+			tmp_gw_factor = (gw_node->orig_node->router->tq_avg *
+					 gw_node->orig_node->router->tq_avg *
+					 down * 100 * 100) /
+					 (TQ_LOCAL_WINDOW_SIZE *
+					 TQ_LOCAL_WINDOW_SIZE * 64);
+
+			if ((tmp_gw_factor > max_gw_factor) ||
+			    ((tmp_gw_factor == max_gw_factor) &&
+			     (gw_node->orig_node->router->tq_avg > max_tq)))
+				curr_gw_tmp = gw_node;
+			break;
+
+		default: /**
+			  * 2:  stable connection (use best statistic)
+			  * 3:  fast-switch (use best statistic but change as
+			  *     soon as a better gateway appears)
+			  * XX: late-switch (use best statistic but change as
+			  *     soon as a better gateway appears which has
+			  *     $routing_class more tq points)
+			  **/
+			if (gw_node->orig_node->router->tq_avg > max_tq)
+				curr_gw_tmp = gw_node;
+			break;
+		}
+
+		if (gw_node->orig_node->router->tq_avg > max_tq)
+			max_tq = gw_node->orig_node->router->tq_avg;
+
+		if (tmp_gw_factor > max_gw_factor)
+			max_gw_factor = tmp_gw_factor;
+	}
+
+	if (bat_priv->curr_gw != curr_gw_tmp) {
+		if ((bat_priv->curr_gw) && (!curr_gw_tmp))
+			bat_dbg(DBG_BATMAN, bat_priv,
+				"Removing selected gateway - "
+				"no gateway in range\n");
+		else if ((!bat_priv->curr_gw) && (curr_gw_tmp))
+			bat_dbg(DBG_BATMAN, bat_priv,
+				"Adding route to gateway %pM "
+				"(gw_flags: %i, tq: %i)\n",
+				curr_gw_tmp->orig_node->orig,
+				curr_gw_tmp->orig_node->gw_flags,
+				curr_gw_tmp->orig_node->router->tq_avg);
+		else
+			bat_dbg(DBG_BATMAN, bat_priv,
+				"Changing route to gateway %pM "
+				"(gw_flags: %i, tq: %i)\n",
+				curr_gw_tmp->orig_node->orig,
+				curr_gw_tmp->orig_node->gw_flags,
+				curr_gw_tmp->orig_node->router->tq_avg);
+
+		old_gw_node = gw_select(bat_priv, curr_gw_tmp);
+	}
+
+	rcu_read_unlock();
+
+	/* the kfree() has to be outside of the rcu lock */
+	if (old_gw_node)
+		kref_put(&old_gw_node->refcount, gw_node_free_ref);
+}
+
+void gw_check_election(struct bat_priv *bat_priv, struct orig_node *orig_node)
+{
+	struct gw_node *curr_gateway_tmp = bat_priv->curr_gw;
+	uint8_t gw_tq_avg, orig_tq_avg;
+
+	if (!curr_gateway_tmp)
+		return;
+
+	if (!curr_gateway_tmp->orig_node)
+		goto deselect;
+
+	if (!curr_gateway_tmp->orig_node->router)
+		goto deselect;
+
+	/* this node already is the gateway */
+	if (curr_gateway_tmp->orig_node == orig_node)
+		return;
+
+	if (!orig_node->router)
+		return;
+
+	gw_tq_avg = curr_gateway_tmp->orig_node->router->tq_avg;
+	orig_tq_avg = orig_node->router->tq_avg;
+
+	/* the TQ value has to be better */
+	if (orig_tq_avg < gw_tq_avg)
+		return;
+
+	/**
+	 * if the routing class is greater than 3 the value tells us how much
+	 * greater the TQ value of the new gateway must be
+	 **/
+	if ((atomic_read(&bat_priv->gw_sel_class) > 3) &&
+	    (orig_tq_avg - gw_tq_avg < atomic_read(&bat_priv->gw_sel_class)))
+		return;
+
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Restarting gateway selection: better gateway found (tq curr: "
+		"%i, tq new: %i)\n",
+		gw_tq_avg, orig_tq_avg);
+
+deselect:
+	gw_deselect(bat_priv);
+}
+
+static void gw_node_add(struct bat_priv *bat_priv,
+			struct orig_node *orig_node, uint8_t new_gwflags)
+{
+	struct gw_node *gw_node;
+	int down, up;
+
+	gw_node = kmalloc(sizeof(struct gw_node), GFP_ATOMIC);
+	if (!gw_node)
+		return;
+
+	memset(gw_node, 0, sizeof(struct gw_node));
+	INIT_HLIST_NODE(&gw_node->list);
+	gw_node->orig_node = orig_node;
+	kref_init(&gw_node->refcount);
+
+	spin_lock_bh(&bat_priv->gw_list_lock);
+	hlist_add_head_rcu(&gw_node->list, &bat_priv->gw_list);
+	spin_unlock_bh(&bat_priv->gw_list_lock);
+
+	gw_bandwidth_to_kbit(new_gwflags, &down, &up);
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Found new gateway %pM -> gw_class: %i - %i%s/%i%s\n",
+		orig_node->orig, new_gwflags,
+		(down > 2048 ? down / 1024 : down),
+		(down > 2048 ? "MBit" : "KBit"),
+		(up > 2048 ? up / 1024 : up),
+		(up > 2048 ? "MBit" : "KBit"));
+}
+
+void gw_node_update(struct bat_priv *bat_priv,
+		    struct orig_node *orig_node, uint8_t new_gwflags)
+{
+	struct hlist_node *node;
+	struct gw_node *gw_node;
+
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(gw_node, node, &bat_priv->gw_list, list) {
+		if (gw_node->orig_node != orig_node)
+			continue;
+
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Gateway class of originator %pM changed from "
+			"%i to %i\n",
+			orig_node->orig, gw_node->orig_node->gw_flags,
+			new_gwflags);
+
+		gw_node->deleted = 0;
+
+		if (new_gwflags == 0) {
+			gw_node->deleted = jiffies;
+			bat_dbg(DBG_BATMAN, bat_priv,
+				"Gateway %pM removed from gateway list\n",
+				orig_node->orig);
+
+			if (gw_node == bat_priv->curr_gw) {
+				rcu_read_unlock();
+				gw_deselect(bat_priv);
+				return;
+			}
+		}
+
+		rcu_read_unlock();
+		return;
+	}
+	rcu_read_unlock();
+
+	if (new_gwflags == 0)
+		return;
+
+	gw_node_add(bat_priv, orig_node, new_gwflags);
+}
+
+void gw_node_delete(struct bat_priv *bat_priv, struct orig_node *orig_node)
+{
+	return gw_node_update(bat_priv, orig_node, 0);
+}
+
+void gw_node_purge(struct bat_priv *bat_priv)
+{
+	struct gw_node *gw_node;
+	struct hlist_node *node, *node_tmp;
+	unsigned long timeout = 2 * PURGE_TIMEOUT * HZ;
+
+	spin_lock_bh(&bat_priv->gw_list_lock);
+
+	hlist_for_each_entry_safe(gw_node, node, node_tmp,
+				  &bat_priv->gw_list, list) {
+		if (((!gw_node->deleted) ||
+		     (time_before(jiffies, gw_node->deleted + timeout))) &&
+		    atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE)
+			continue;
+
+		if (bat_priv->curr_gw == gw_node)
+			gw_deselect(bat_priv);
+
+		hlist_del_rcu(&gw_node->list);
+		call_rcu(&gw_node->rcu, gw_node_free_rcu);
+	}
+
+
+	spin_unlock_bh(&bat_priv->gw_list_lock);
+}
+
+static int _write_buffer_text(struct bat_priv *bat_priv,
+			      struct seq_file *seq, struct gw_node *gw_node)
+{
+	int down, up;
+
+	gw_bandwidth_to_kbit(gw_node->orig_node->gw_flags, &down, &up);
+
+	return seq_printf(seq, "%s %pM (%3i) %pM [%10s]: %3i - %i%s/%i%s\n",
+		       (bat_priv->curr_gw == gw_node ? "=>" : "  "),
+		       gw_node->orig_node->orig,
+		       gw_node->orig_node->router->tq_avg,
+		       gw_node->orig_node->router->addr,
+		       gw_node->orig_node->router->if_incoming->net_dev->name,
+		       gw_node->orig_node->gw_flags,
+		       (down > 2048 ? down / 1024 : down),
+		       (down > 2048 ? "MBit" : "KBit"),
+		       (up > 2048 ? up / 1024 : up),
+		       (up > 2048 ? "MBit" : "KBit"));
+}
+
+int gw_client_seq_print_text(struct seq_file *seq, void *offset)
+{
+	struct net_device *net_dev = (struct net_device *)seq->private;
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	struct gw_node *gw_node;
+	struct hlist_node *node;
+	int gw_count = 0;
+
+	if (!bat_priv->primary_if) {
+
+		return seq_printf(seq, "BATMAN mesh %s disabled - please "
+				  "specify interfaces to enable it\n",
+				  net_dev->name);
+	}
+
+	if (bat_priv->primary_if->if_status != IF_ACTIVE) {
+
+		return seq_printf(seq, "BATMAN mesh %s disabled - "
+				       "primary interface not active\n",
+				       net_dev->name);
+	}
+
+	seq_printf(seq, "      %-12s (%s/%i) %17s [%10s]: gw_class ... "
+		   "[B.A.T.M.A.N. adv %s%s, MainIF/MAC: %s/%pM (%s)]\n",
+		   "Gateway", "#", TQ_MAX_VALUE, "Nexthop",
+		   "outgoingIF", SOURCE_VERSION, REVISION_VERSION_STR,
+		   bat_priv->primary_if->net_dev->name,
+		   bat_priv->primary_if->net_dev->dev_addr, net_dev->name);
+
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(gw_node, node, &bat_priv->gw_list, list) {
+		if (gw_node->deleted)
+			continue;
+
+		if (!gw_node->orig_node->router)
+			continue;
+
+		_write_buffer_text(bat_priv, seq, gw_node);
+		gw_count++;
+	}
+	rcu_read_unlock();
+
+	if (gw_count == 0)
+		seq_printf(seq, "No gateways in range ...\n");
+
+	return 0;
+}
+
+int gw_is_target(struct bat_priv *bat_priv, struct sk_buff *skb)
+{
+	struct ethhdr *ethhdr;
+	struct iphdr *iphdr;
+	struct ipv6hdr *ipv6hdr;
+	struct udphdr *udphdr;
+	unsigned int header_len = 0;
+
+	if (atomic_read(&bat_priv->gw_mode) == GW_MODE_OFF)
+		return 0;
+
+	/* check for ethernet header */
+	if (!pskb_may_pull(skb, header_len + ETH_HLEN))
+		return 0;
+	ethhdr = (struct ethhdr *)skb->data;
+	header_len += ETH_HLEN;
+
+	/* check for initial vlan header */
+	if (ntohs(ethhdr->h_proto) == ETH_P_8021Q) {
+		if (!pskb_may_pull(skb, header_len + VLAN_HLEN))
+			return 0;
+		ethhdr = (struct ethhdr *)(skb->data + VLAN_HLEN);
+		header_len += VLAN_HLEN;
+	}
+
+	/* check for ip header */
+	switch (ntohs(ethhdr->h_proto)) {
+	case ETH_P_IP:
+		if (!pskb_may_pull(skb, header_len + sizeof(struct iphdr)))
+			return 0;
+		iphdr = (struct iphdr *)(skb->data + header_len);
+		header_len += iphdr->ihl * 4;
+
+		/* check for udp header */
+		if (iphdr->protocol != IPPROTO_UDP)
+			return 0;
+
+		break;
+	case ETH_P_IPV6:
+		if (!pskb_may_pull(skb, header_len + sizeof(struct ipv6hdr)))
+			return 0;
+		ipv6hdr = (struct ipv6hdr *)(skb->data + header_len);
+		header_len += sizeof(struct ipv6hdr);
+
+		/* check for udp header */
+		if (ipv6hdr->nexthdr != IPPROTO_UDP)
+			return 0;
+
+		break;
+	default:
+		return 0;
+	}
+
+	if (!pskb_may_pull(skb, header_len + sizeof(struct udphdr)))
+		return 0;
+	udphdr = (struct udphdr *)(skb->data + header_len);
+	header_len += sizeof(struct udphdr);
+
+	/* check for bootp port */
+	if ((ntohs(ethhdr->h_proto) == ETH_P_IP) &&
+	     (ntohs(udphdr->dest) != 67))
+		return 0;
+
+	if ((ntohs(ethhdr->h_proto) == ETH_P_IPV6) &&
+	    (ntohs(udphdr->dest) != 547))
+		return 0;
+
+	if (atomic_read(&bat_priv->gw_mode) == GW_MODE_SERVER)
+		return -1;
+
+	if (!bat_priv->curr_gw)
+		return 0;
+
+	return 1;
+}
diff --git a/net/batman-adv/gateway_client.h b/net/batman-adv/gateway_client.h
new file mode 100644
index 00000000000..4585e654984
--- /dev/null
+++ b/net/batman-adv/gateway_client.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (C) 2009-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_GATEWAY_CLIENT_H_
+#define _NET_BATMAN_ADV_GATEWAY_CLIENT_H_
+
+void gw_deselect(struct bat_priv *bat_priv);
+void gw_election(struct bat_priv *bat_priv);
+void *gw_get_selected(struct bat_priv *bat_priv);
+void gw_check_election(struct bat_priv *bat_priv, struct orig_node *orig_node);
+void gw_node_update(struct bat_priv *bat_priv,
+		    struct orig_node *orig_node, uint8_t new_gwflags);
+void gw_node_delete(struct bat_priv *bat_priv, struct orig_node *orig_node);
+void gw_node_purge(struct bat_priv *bat_priv);
+int gw_client_seq_print_text(struct seq_file *seq, void *offset);
+int gw_is_target(struct bat_priv *bat_priv, struct sk_buff *skb);
+
+#endif /* _NET_BATMAN_ADV_GATEWAY_CLIENT_H_ */
diff --git a/net/batman-adv/gateway_common.c b/net/batman-adv/gateway_common.c
new file mode 100644
index 00000000000..b962982f017
--- /dev/null
+++ b/net/batman-adv/gateway_common.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2009-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "gateway_common.h"
+#include "gateway_client.h"
+
+/* calculates the gateway class from kbit */
+static void kbit_to_gw_bandwidth(int down, int up, long *gw_srv_class)
+{
+	int mdown = 0, tdown, tup, difference;
+	uint8_t sbit, part;
+
+	*gw_srv_class = 0;
+	difference = 0x0FFFFFFF;
+
+	/* test all downspeeds */
+	for (sbit = 0; sbit < 2; sbit++) {
+		for (part = 0; part < 16; part++) {
+			tdown = 32 * (sbit + 2) * (1 << part);
+
+			if (abs(tdown - down) < difference) {
+				*gw_srv_class = (sbit << 7) + (part << 3);
+				difference = abs(tdown - down);
+				mdown = tdown;
+			}
+		}
+	}
+
+	/* test all upspeeds */
+	difference = 0x0FFFFFFF;
+
+	for (part = 0; part < 8; part++) {
+		tup = ((part + 1) * (mdown)) / 8;
+
+		if (abs(tup - up) < difference) {
+			*gw_srv_class = (*gw_srv_class & 0xF8) | part;
+			difference = abs(tup - up);
+		}
+	}
+}
+
+/* returns the up and downspeeds in kbit, calculated from the class */
+void gw_bandwidth_to_kbit(uint8_t gw_srv_class, int *down, int *up)
+{
+	char sbit = (gw_srv_class & 0x80) >> 7;
+	char dpart = (gw_srv_class & 0x78) >> 3;
+	char upart = (gw_srv_class & 0x07);
+
+	if (!gw_srv_class) {
+		*down = 0;
+		*up = 0;
+		return;
+	}
+
+	*down = 32 * (sbit + 2) * (1 << dpart);
+	*up = ((upart + 1) * (*down)) / 8;
+}
+
+static bool parse_gw_bandwidth(struct net_device *net_dev, char *buff,
+			       long *up, long *down)
+{
+	int ret, multi = 1;
+	char *slash_ptr, *tmp_ptr;
+
+	slash_ptr = strchr(buff, '/');
+	if (slash_ptr)
+		*slash_ptr = 0;
+
+	if (strlen(buff) > 4) {
+		tmp_ptr = buff + strlen(buff) - 4;
+
+		if (strnicmp(tmp_ptr, "mbit", 4) == 0)
+			multi = 1024;
+
+		if ((strnicmp(tmp_ptr, "kbit", 4) == 0) ||
+			(multi > 1))
+			*tmp_ptr = '\0';
+	}
+
+	ret = strict_strtoul(buff, 10, down);
+	if (ret) {
+		bat_err(net_dev,
+			"Download speed of gateway mode invalid: %s\n",
+			buff);
+		return false;
+	}
+
+	*down *= multi;
+
+	/* we also got some upload info */
+	if (slash_ptr) {
+		multi = 1;
+
+		if (strlen(slash_ptr + 1) > 4) {
+			tmp_ptr = slash_ptr + 1 - 4 + strlen(slash_ptr + 1);
+
+			if (strnicmp(tmp_ptr, "mbit", 4) == 0)
+				multi = 1024;
+
+			if ((strnicmp(tmp_ptr, "kbit", 4) == 0) ||
+				(multi > 1))
+				*tmp_ptr = '\0';
+		}
+
+		ret = strict_strtoul(slash_ptr + 1, 10, up);
+		if (ret) {
+			bat_err(net_dev,
+				"Upload speed of gateway mode invalid: "
+				"%s\n", slash_ptr + 1);
+			return false;
+		}
+
+		*up *= multi;
+	}
+
+	return true;
+}
+
+ssize_t gw_bandwidth_set(struct net_device *net_dev, char *buff, size_t count)
+{
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	long gw_bandwidth_tmp = 0, up = 0, down = 0;
+	bool ret;
+
+	ret = parse_gw_bandwidth(net_dev, buff, &up, &down);
+	if (!ret)
+		goto end;
+
+	if ((!down) || (down < 256))
+		down = 2000;
+
+	if (!up)
+		up = down / 5;
+
+	kbit_to_gw_bandwidth(down, up, &gw_bandwidth_tmp);
+
+	/**
+	 * the gw bandwidth we guessed above might not match the given
+	 * speeds, hence we need to calculate it back to show the number
+	 * that is going to be propagated
+	 **/
+	gw_bandwidth_to_kbit((uint8_t)gw_bandwidth_tmp,
+			     (int *)&down, (int *)&up);
+
+	gw_deselect(bat_priv);
+	bat_info(net_dev, "Changing gateway bandwidth from: '%i' to: '%ld' "
+		 "(propagating: %ld%s/%ld%s)\n",
+		 atomic_read(&bat_priv->gw_bandwidth), gw_bandwidth_tmp,
+		 (down > 2048 ? down / 1024 : down),
+		 (down > 2048 ? "MBit" : "KBit"),
+		 (up > 2048 ? up / 1024 : up),
+		 (up > 2048 ? "MBit" : "KBit"));
+
+	atomic_set(&bat_priv->gw_bandwidth, gw_bandwidth_tmp);
+
+end:
+	return count;
+}
diff --git a/net/batman-adv/gateway_common.h b/net/batman-adv/gateway_common.h
new file mode 100644
index 00000000000..5e728d0b795
--- /dev/null
+++ b/net/batman-adv/gateway_common.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2009-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_GATEWAY_COMMON_H_
+#define _NET_BATMAN_ADV_GATEWAY_COMMON_H_
+
+enum gw_modes {
+	GW_MODE_OFF,
+	GW_MODE_CLIENT,
+	GW_MODE_SERVER,
+};
+
+#define GW_MODE_OFF_NAME	"off"
+#define GW_MODE_CLIENT_NAME	"client"
+#define GW_MODE_SERVER_NAME	"server"
+
+void gw_bandwidth_to_kbit(uint8_t gw_class, int *down, int *up);
+ssize_t gw_bandwidth_set(struct net_device *net_dev, char *buff, size_t count);
+
+#endif /* _NET_BATMAN_ADV_GATEWAY_COMMON_H_ */
diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c
new file mode 100644
index 00000000000..4f95777ce08
--- /dev/null
+++ b/net/batman-adv/hard-interface.c
@@ -0,0 +1,651 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "hard-interface.h"
+#include "soft-interface.h"
+#include "send.h"
+#include "translation-table.h"
+#include "routing.h"
+#include "bat_sysfs.h"
+#include "originator.h"
+#include "hash.h"
+
+#include <linux/if_arp.h>
+
+/* protect update critical side of if_list - but not the content */
+static DEFINE_SPINLOCK(if_list_lock);
+
+static void hardif_free_rcu(struct rcu_head *rcu)
+{
+	struct batman_if *batman_if;
+
+	batman_if = container_of(rcu, struct batman_if, rcu);
+	dev_put(batman_if->net_dev);
+	kref_put(&batman_if->refcount, hardif_free_ref);
+}
+
+struct batman_if *get_batman_if_by_netdev(struct net_device *net_dev)
+{
+	struct batman_if *batman_if;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(batman_if, &if_list, list) {
+		if (batman_if->net_dev == net_dev)
+			goto out;
+	}
+
+	batman_if = NULL;
+
+out:
+	if (batman_if)
+		kref_get(&batman_if->refcount);
+
+	rcu_read_unlock();
+	return batman_if;
+}
+
+static int is_valid_iface(struct net_device *net_dev)
+{
+	if (net_dev->flags & IFF_LOOPBACK)
+		return 0;
+
+	if (net_dev->type != ARPHRD_ETHER)
+		return 0;
+
+	if (net_dev->addr_len != ETH_ALEN)
+		return 0;
+
+	/* no batman over batman */
+#ifdef HAVE_NET_DEVICE_OPS
+	if (net_dev->netdev_ops->ndo_start_xmit == interface_tx)
+		return 0;
+#else
+	if (net_dev->hard_start_xmit == interface_tx)
+		return 0;
+#endif
+
+	/* Device is being bridged */
+	/* if (net_dev->priv_flags & IFF_BRIDGE_PORT)
+		return 0; */
+
+	return 1;
+}
+
+static struct batman_if *get_active_batman_if(struct net_device *soft_iface)
+{
+	struct batman_if *batman_if;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(batman_if, &if_list, list) {
+		if (batman_if->soft_iface != soft_iface)
+			continue;
+
+		if (batman_if->if_status == IF_ACTIVE)
+			goto out;
+	}
+
+	batman_if = NULL;
+
+out:
+	if (batman_if)
+		kref_get(&batman_if->refcount);
+
+	rcu_read_unlock();
+	return batman_if;
+}
+
+static void update_primary_addr(struct bat_priv *bat_priv)
+{
+	struct vis_packet *vis_packet;
+
+	vis_packet = (struct vis_packet *)
+				bat_priv->my_vis_info->skb_packet->data;
+	memcpy(vis_packet->vis_orig,
+	       bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+	memcpy(vis_packet->sender_orig,
+	       bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+}
+
+static void set_primary_if(struct bat_priv *bat_priv,
+			   struct batman_if *batman_if)
+{
+	struct batman_packet *batman_packet;
+	struct batman_if *old_if;
+
+	if (batman_if)
+		kref_get(&batman_if->refcount);
+
+	old_if = bat_priv->primary_if;
+	bat_priv->primary_if = batman_if;
+
+	if (old_if)
+		kref_put(&old_if->refcount, hardif_free_ref);
+
+	if (!bat_priv->primary_if)
+		return;
+
+	batman_packet = (struct batman_packet *)(batman_if->packet_buff);
+	batman_packet->flags = PRIMARIES_FIRST_HOP;
+	batman_packet->ttl = TTL;
+
+	update_primary_addr(bat_priv);
+
+	/***
+	 * hacky trick to make sure that we send the HNA information via
+	 * our new primary interface
+	 */
+	atomic_set(&bat_priv->hna_local_changed, 1);
+}
+
+static bool hardif_is_iface_up(struct batman_if *batman_if)
+{
+	if (batman_if->net_dev->flags & IFF_UP)
+		return true;
+
+	return false;
+}
+
+static void update_mac_addresses(struct batman_if *batman_if)
+{
+	memcpy(((struct batman_packet *)(batman_if->packet_buff))->orig,
+	       batman_if->net_dev->dev_addr, ETH_ALEN);
+	memcpy(((struct batman_packet *)(batman_if->packet_buff))->prev_sender,
+	       batman_if->net_dev->dev_addr, ETH_ALEN);
+}
+
+static void check_known_mac_addr(struct net_device *net_dev)
+{
+	struct batman_if *batman_if;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(batman_if, &if_list, list) {
+		if ((batman_if->if_status != IF_ACTIVE) &&
+		    (batman_if->if_status != IF_TO_BE_ACTIVATED))
+			continue;
+
+		if (batman_if->net_dev == net_dev)
+			continue;
+
+		if (!compare_orig(batman_if->net_dev->dev_addr,
+				  net_dev->dev_addr))
+			continue;
+
+		pr_warning("The newly added mac address (%pM) already exists "
+			   "on: %s\n", net_dev->dev_addr,
+			   batman_if->net_dev->name);
+		pr_warning("It is strongly recommended to keep mac addresses "
+			   "unique to avoid problems!\n");
+	}
+	rcu_read_unlock();
+}
+
+int hardif_min_mtu(struct net_device *soft_iface)
+{
+	struct bat_priv *bat_priv = netdev_priv(soft_iface);
+	struct batman_if *batman_if;
+	/* allow big frames if all devices are capable to do so
+	 * (have MTU > 1500 + BAT_HEADER_LEN) */
+	int min_mtu = ETH_DATA_LEN;
+
+	if (atomic_read(&bat_priv->fragmentation))
+		goto out;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(batman_if, &if_list, list) {
+		if ((batman_if->if_status != IF_ACTIVE) &&
+		    (batman_if->if_status != IF_TO_BE_ACTIVATED))
+			continue;
+
+		if (batman_if->soft_iface != soft_iface)
+			continue;
+
+		min_mtu = min_t(int, batman_if->net_dev->mtu - BAT_HEADER_LEN,
+				min_mtu);
+	}
+	rcu_read_unlock();
+out:
+	return min_mtu;
+}
+
+/* adjusts the MTU if a new interface with a smaller MTU appeared. */
+void update_min_mtu(struct net_device *soft_iface)
+{
+	int min_mtu;
+
+	min_mtu = hardif_min_mtu(soft_iface);
+	if (soft_iface->mtu != min_mtu)
+		soft_iface->mtu = min_mtu;
+}
+
+static void hardif_activate_interface(struct batman_if *batman_if)
+{
+	struct bat_priv *bat_priv;
+
+	if (batman_if->if_status != IF_INACTIVE)
+		return;
+
+	bat_priv = netdev_priv(batman_if->soft_iface);
+
+	update_mac_addresses(batman_if);
+	batman_if->if_status = IF_TO_BE_ACTIVATED;
+
+	/**
+	 * the first active interface becomes our primary interface or
+	 * the next active interface after the old primay interface was removed
+	 */
+	if (!bat_priv->primary_if)
+		set_primary_if(bat_priv, batman_if);
+
+	bat_info(batman_if->soft_iface, "Interface activated: %s\n",
+		 batman_if->net_dev->name);
+
+	update_min_mtu(batman_if->soft_iface);
+	return;
+}
+
+static void hardif_deactivate_interface(struct batman_if *batman_if)
+{
+	if ((batman_if->if_status != IF_ACTIVE) &&
+	   (batman_if->if_status != IF_TO_BE_ACTIVATED))
+		return;
+
+	batman_if->if_status = IF_INACTIVE;
+
+	bat_info(batman_if->soft_iface, "Interface deactivated: %s\n",
+		 batman_if->net_dev->name);
+
+	update_min_mtu(batman_if->soft_iface);
+}
+
+int hardif_enable_interface(struct batman_if *batman_if, char *iface_name)
+{
+	struct bat_priv *bat_priv;
+	struct batman_packet *batman_packet;
+
+	if (batman_if->if_status != IF_NOT_IN_USE)
+		goto out;
+
+	batman_if->soft_iface = dev_get_by_name(&init_net, iface_name);
+
+	if (!batman_if->soft_iface) {
+		batman_if->soft_iface = softif_create(iface_name);
+
+		if (!batman_if->soft_iface)
+			goto err;
+
+		/* dev_get_by_name() increases the reference counter for us */
+		dev_hold(batman_if->soft_iface);
+	}
+
+	bat_priv = netdev_priv(batman_if->soft_iface);
+	batman_if->packet_len = BAT_PACKET_LEN;
+	batman_if->packet_buff = kmalloc(batman_if->packet_len, GFP_ATOMIC);
+
+	if (!batman_if->packet_buff) {
+		bat_err(batman_if->soft_iface, "Can't add interface packet "
+			"(%s): out of memory\n", batman_if->net_dev->name);
+		goto err;
+	}
+
+	batman_packet = (struct batman_packet *)(batman_if->packet_buff);
+	batman_packet->packet_type = BAT_PACKET;
+	batman_packet->version = COMPAT_VERSION;
+	batman_packet->flags = 0;
+	batman_packet->ttl = 2;
+	batman_packet->tq = TQ_MAX_VALUE;
+	batman_packet->num_hna = 0;
+
+	batman_if->if_num = bat_priv->num_ifaces;
+	bat_priv->num_ifaces++;
+	batman_if->if_status = IF_INACTIVE;
+	orig_hash_add_if(batman_if, bat_priv->num_ifaces);
+
+	batman_if->batman_adv_ptype.type = __constant_htons(ETH_P_BATMAN);
+	batman_if->batman_adv_ptype.func = batman_skb_recv;
+	batman_if->batman_adv_ptype.dev = batman_if->net_dev;
+	kref_get(&batman_if->refcount);
+	dev_add_pack(&batman_if->batman_adv_ptype);
+
+	atomic_set(&batman_if->seqno, 1);
+	atomic_set(&batman_if->frag_seqno, 1);
+	bat_info(batman_if->soft_iface, "Adding interface: %s\n",
+		 batman_if->net_dev->name);
+
+	if (atomic_read(&bat_priv->fragmentation) && batman_if->net_dev->mtu <
+		ETH_DATA_LEN + BAT_HEADER_LEN)
+		bat_info(batman_if->soft_iface,
+			"The MTU of interface %s is too small (%i) to handle "
+			"the transport of batman-adv packets. Packets going "
+			"over this interface will be fragmented on layer2 "
+			"which could impact the performance. Setting the MTU "
+			"to %zi would solve the problem.\n",
+			batman_if->net_dev->name, batman_if->net_dev->mtu,
+			ETH_DATA_LEN + BAT_HEADER_LEN);
+
+	if (!atomic_read(&bat_priv->fragmentation) && batman_if->net_dev->mtu <
+		ETH_DATA_LEN + BAT_HEADER_LEN)
+		bat_info(batman_if->soft_iface,
+			"The MTU of interface %s is too small (%i) to handle "
+			"the transport of batman-adv packets. If you experience"
+			" problems getting traffic through try increasing the "
+			"MTU to %zi.\n",
+			batman_if->net_dev->name, batman_if->net_dev->mtu,
+			ETH_DATA_LEN + BAT_HEADER_LEN);
+
+	if (hardif_is_iface_up(batman_if))
+		hardif_activate_interface(batman_if);
+	else
+		bat_err(batman_if->soft_iface, "Not using interface %s "
+			"(retrying later): interface not active\n",
+			batman_if->net_dev->name);
+
+	/* begin scheduling originator messages on that interface */
+	schedule_own_packet(batman_if);
+
+out:
+	return 0;
+
+err:
+	return -ENOMEM;
+}
+
+void hardif_disable_interface(struct batman_if *batman_if)
+{
+	struct bat_priv *bat_priv = netdev_priv(batman_if->soft_iface);
+
+	if (batman_if->if_status == IF_ACTIVE)
+		hardif_deactivate_interface(batman_if);
+
+	if (batman_if->if_status != IF_INACTIVE)
+		return;
+
+	bat_info(batman_if->soft_iface, "Removing interface: %s\n",
+		 batman_if->net_dev->name);
+	dev_remove_pack(&batman_if->batman_adv_ptype);
+	kref_put(&batman_if->refcount, hardif_free_ref);
+
+	bat_priv->num_ifaces--;
+	orig_hash_del_if(batman_if, bat_priv->num_ifaces);
+
+	if (batman_if == bat_priv->primary_if) {
+		struct batman_if *new_if;
+
+		new_if = get_active_batman_if(batman_if->soft_iface);
+		set_primary_if(bat_priv, new_if);
+
+		if (new_if)
+			kref_put(&new_if->refcount, hardif_free_ref);
+	}
+
+	kfree(batman_if->packet_buff);
+	batman_if->packet_buff = NULL;
+	batman_if->if_status = IF_NOT_IN_USE;
+
+	/* delete all references to this batman_if */
+	purge_orig_ref(bat_priv);
+	purge_outstanding_packets(bat_priv, batman_if);
+	dev_put(batman_if->soft_iface);
+
+	/* nobody uses this interface anymore */
+	if (!bat_priv->num_ifaces)
+		softif_destroy(batman_if->soft_iface);
+
+	batman_if->soft_iface = NULL;
+}
+
+static struct batman_if *hardif_add_interface(struct net_device *net_dev)
+{
+	struct batman_if *batman_if;
+	int ret;
+
+	ret = is_valid_iface(net_dev);
+	if (ret != 1)
+		goto out;
+
+	dev_hold(net_dev);
+
+	batman_if = kmalloc(sizeof(struct batman_if), GFP_ATOMIC);
+	if (!batman_if) {
+		pr_err("Can't add interface (%s): out of memory\n",
+		       net_dev->name);
+		goto release_dev;
+	}
+
+	ret = sysfs_add_hardif(&batman_if->hardif_obj, net_dev);
+	if (ret)
+		goto free_if;
+
+	batman_if->if_num = -1;
+	batman_if->net_dev = net_dev;
+	batman_if->soft_iface = NULL;
+	batman_if->if_status = IF_NOT_IN_USE;
+	INIT_LIST_HEAD(&batman_if->list);
+	kref_init(&batman_if->refcount);
+
+	check_known_mac_addr(batman_if->net_dev);
+
+	spin_lock(&if_list_lock);
+	list_add_tail_rcu(&batman_if->list, &if_list);
+	spin_unlock(&if_list_lock);
+
+	/* extra reference for return */
+	kref_get(&batman_if->refcount);
+	return batman_if;
+
+free_if:
+	kfree(batman_if);
+release_dev:
+	dev_put(net_dev);
+out:
+	return NULL;
+}
+
+static void hardif_remove_interface(struct batman_if *batman_if)
+{
+	/* first deactivate interface */
+	if (batman_if->if_status != IF_NOT_IN_USE)
+		hardif_disable_interface(batman_if);
+
+	if (batman_if->if_status != IF_NOT_IN_USE)
+		return;
+
+	batman_if->if_status = IF_TO_BE_REMOVED;
+	sysfs_del_hardif(&batman_if->hardif_obj);
+	call_rcu(&batman_if->rcu, hardif_free_rcu);
+}
+
+void hardif_remove_interfaces(void)
+{
+	struct batman_if *batman_if, *batman_if_tmp;
+	struct list_head if_queue;
+
+	INIT_LIST_HEAD(&if_queue);
+
+	spin_lock(&if_list_lock);
+	list_for_each_entry_safe(batman_if, batman_if_tmp, &if_list, list) {
+		list_del_rcu(&batman_if->list);
+		list_add_tail(&batman_if->list, &if_queue);
+	}
+	spin_unlock(&if_list_lock);
+
+	rtnl_lock();
+	list_for_each_entry_safe(batman_if, batman_if_tmp, &if_queue, list) {
+		hardif_remove_interface(batman_if);
+	}
+	rtnl_unlock();
+}
+
+static int hard_if_event(struct notifier_block *this,
+			 unsigned long event, void *ptr)
+{
+	struct net_device *net_dev = (struct net_device *)ptr;
+	struct batman_if *batman_if = get_batman_if_by_netdev(net_dev);
+	struct bat_priv *bat_priv;
+
+	if (!batman_if && event == NETDEV_REGISTER)
+		batman_if = hardif_add_interface(net_dev);
+
+	if (!batman_if)
+		goto out;
+
+	switch (event) {
+	case NETDEV_UP:
+		hardif_activate_interface(batman_if);
+		break;
+	case NETDEV_GOING_DOWN:
+	case NETDEV_DOWN:
+		hardif_deactivate_interface(batman_if);
+		break;
+	case NETDEV_UNREGISTER:
+		spin_lock(&if_list_lock);
+		list_del_rcu(&batman_if->list);
+		spin_unlock(&if_list_lock);
+
+		hardif_remove_interface(batman_if);
+		break;
+	case NETDEV_CHANGEMTU:
+		if (batman_if->soft_iface)
+			update_min_mtu(batman_if->soft_iface);
+		break;
+	case NETDEV_CHANGEADDR:
+		if (batman_if->if_status == IF_NOT_IN_USE)
+			goto hardif_put;
+
+		check_known_mac_addr(batman_if->net_dev);
+		update_mac_addresses(batman_if);
+
+		bat_priv = netdev_priv(batman_if->soft_iface);
+		if (batman_if == bat_priv->primary_if)
+			update_primary_addr(bat_priv);
+		break;
+	default:
+		break;
+	};
+
+hardif_put:
+	kref_put(&batman_if->refcount, hardif_free_ref);
+out:
+	return NOTIFY_DONE;
+}
+
+/* receive a packet with the batman ethertype coming on a hard
+ * interface */
+int batman_skb_recv(struct sk_buff *skb, struct net_device *dev,
+	struct packet_type *ptype, struct net_device *orig_dev)
+{
+	struct bat_priv *bat_priv;
+	struct batman_packet *batman_packet;
+	struct batman_if *batman_if;
+	int ret;
+
+	batman_if = container_of(ptype, struct batman_if, batman_adv_ptype);
+	skb = skb_share_check(skb, GFP_ATOMIC);
+
+	/* skb was released by skb_share_check() */
+	if (!skb)
+		goto err_out;
+
+	/* packet should hold at least type and version */
+	if (unlikely(!pskb_may_pull(skb, 2)))
+		goto err_free;
+
+	/* expect a valid ethernet header here. */
+	if (unlikely(skb->mac_len != sizeof(struct ethhdr)
+				|| !skb_mac_header(skb)))
+		goto err_free;
+
+	if (!batman_if->soft_iface)
+		goto err_free;
+
+	bat_priv = netdev_priv(batman_if->soft_iface);
+
+	if (atomic_read(&bat_priv->mesh_state) != MESH_ACTIVE)
+		goto err_free;
+
+	/* discard frames on not active interfaces */
+	if (batman_if->if_status != IF_ACTIVE)
+		goto err_free;
+
+	batman_packet = (struct batman_packet *)skb->data;
+
+	if (batman_packet->version != COMPAT_VERSION) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: incompatible batman version (%i)\n",
+			batman_packet->version);
+		goto err_free;
+	}
+
+	/* all receive handlers return whether they received or reused
+	 * the supplied skb. if not, we have to free the skb. */
+
+	switch (batman_packet->packet_type) {
+		/* batman originator packet */
+	case BAT_PACKET:
+		ret = recv_bat_packet(skb, batman_if);
+		break;
+
+		/* batman icmp packet */
+	case BAT_ICMP:
+		ret = recv_icmp_packet(skb, batman_if);
+		break;
+
+		/* unicast packet */
+	case BAT_UNICAST:
+		ret = recv_unicast_packet(skb, batman_if);
+		break;
+
+		/* fragmented unicast packet */
+	case BAT_UNICAST_FRAG:
+		ret = recv_ucast_frag_packet(skb, batman_if);
+		break;
+
+		/* broadcast packet */
+	case BAT_BCAST:
+		ret = recv_bcast_packet(skb, batman_if);
+		break;
+
+		/* vis packet */
+	case BAT_VIS:
+		ret = recv_vis_packet(skb, batman_if);
+		break;
+	default:
+		ret = NET_RX_DROP;
+	}
+
+	if (ret == NET_RX_DROP)
+		kfree_skb(skb);
+
+	/* return NET_RX_SUCCESS in any case as we
+	 * most probably dropped the packet for
+	 * routing-logical reasons. */
+
+	return NET_RX_SUCCESS;
+
+err_free:
+	kfree_skb(skb);
+err_out:
+	return NET_RX_DROP;
+}
+
+struct notifier_block hard_if_notifier = {
+	.notifier_call = hard_if_event,
+};
diff --git a/net/batman-adv/hard-interface.h b/net/batman-adv/hard-interface.h
new file mode 100644
index 00000000000..30ec3b8db45
--- /dev/null
+++ b/net/batman-adv/hard-interface.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_HARD_INTERFACE_H_
+#define _NET_BATMAN_ADV_HARD_INTERFACE_H_
+
+#define IF_NOT_IN_USE 0
+#define IF_TO_BE_REMOVED 1
+#define IF_INACTIVE 2
+#define IF_ACTIVE 3
+#define IF_TO_BE_ACTIVATED 4
+#define IF_I_WANT_YOU 5
+
+extern struct notifier_block hard_if_notifier;
+
+struct batman_if *get_batman_if_by_netdev(struct net_device *net_dev);
+int hardif_enable_interface(struct batman_if *batman_if, char *iface_name);
+void hardif_disable_interface(struct batman_if *batman_if);
+void hardif_remove_interfaces(void);
+int batman_skb_recv(struct sk_buff *skb,
+				struct net_device *dev,
+				struct packet_type *ptype,
+				struct net_device *orig_dev);
+int hardif_min_mtu(struct net_device *soft_iface);
+void update_min_mtu(struct net_device *soft_iface);
+
+static inline void hardif_free_ref(struct kref *refcount)
+{
+	struct batman_if *batman_if;
+
+	batman_if = container_of(refcount, struct batman_if, refcount);
+	kfree(batman_if);
+}
+
+#endif /* _NET_BATMAN_ADV_HARD_INTERFACE_H_ */
diff --git a/net/batman-adv/hash.c b/net/batman-adv/hash.c
new file mode 100644
index 00000000000..26e623eb9de
--- /dev/null
+++ b/net/batman-adv/hash.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2006-2010 B.A.T.M.A.N. contributors:
+ *
+ * Simon Wunderlich, Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "hash.h"
+
+/* clears the hash */
+static void hash_init(struct hashtable_t *hash)
+{
+	int i;
+
+	for (i = 0 ; i < hash->size; i++)
+		INIT_HLIST_HEAD(&hash->table[i]);
+}
+
+/* free only the hashtable and the hash itself. */
+void hash_destroy(struct hashtable_t *hash)
+{
+	kfree(hash->table);
+	kfree(hash);
+}
+
+/* allocates and clears the hash */
+struct hashtable_t *hash_new(int size)
+{
+	struct hashtable_t *hash;
+
+	hash = kmalloc(sizeof(struct hashtable_t) , GFP_ATOMIC);
+
+	if (!hash)
+		return NULL;
+
+	hash->size = size;
+	hash->table = kmalloc(sizeof(struct element_t *) * size, GFP_ATOMIC);
+
+	if (!hash->table) {
+		kfree(hash);
+		return NULL;
+	}
+
+	hash_init(hash);
+
+	return hash;
+}
diff --git a/net/batman-adv/hash.h b/net/batman-adv/hash.h
new file mode 100644
index 00000000000..09216ade16f
--- /dev/null
+++ b/net/batman-adv/hash.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2006-2010 B.A.T.M.A.N. contributors:
+ *
+ * Simon Wunderlich, Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_HASH_H_
+#define _NET_BATMAN_ADV_HASH_H_
+
+#include <linux/list.h>
+
+/* callback to a compare function.  should
+ * compare 2 element datas for their keys,
+ * return 0 if same and not 0 if not
+ * same */
+typedef int (*hashdata_compare_cb)(void *, void *);
+
+/* the hashfunction, should return an index
+ * based on the key in the data of the first
+ * argument and the size the second */
+typedef int (*hashdata_choose_cb)(void *, int);
+typedef void (*hashdata_free_cb)(void *, void *);
+
+struct element_t {
+	void *data;		/* pointer to the data */
+	struct hlist_node hlist;	/* bucket list pointer */
+};
+
+struct hashtable_t {
+	struct hlist_head *table;   /* the hashtable itself, with the buckets */
+	int size;		    /* size of hashtable */
+};
+
+/* allocates and clears the hash */
+struct hashtable_t *hash_new(int size);
+
+/* remove element if you already found the element you want to delete and don't
+ * need the overhead to find it again with hash_remove().  But usually, you
+ * don't want to use this function, as it fiddles with hash-internals. */
+void *hash_remove_element(struct hashtable_t *hash, struct element_t *elem);
+
+/* free only the hashtable and the hash itself. */
+void hash_destroy(struct hashtable_t *hash);
+
+/* remove the hash structure. if hashdata_free_cb != NULL, this function will be
+ * called to remove the elements inside of the hash.  if you don't remove the
+ * elements, memory might be leaked. */
+static inline void hash_delete(struct hashtable_t *hash,
+			       hashdata_free_cb free_cb, void *arg)
+{
+	struct hlist_head *head;
+	struct hlist_node *walk, *safe;
+	struct element_t *bucket;
+	int i;
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_safe(walk, safe, head) {
+			bucket = hlist_entry(walk, struct element_t, hlist);
+			if (free_cb)
+				free_cb(bucket->data, arg);
+
+			hlist_del(walk);
+			kfree(bucket);
+		}
+	}
+
+	hash_destroy(hash);
+}
+
+/* adds data to the hashtable. returns 0 on success, -1 on error */
+static inline int hash_add(struct hashtable_t *hash,
+			   hashdata_compare_cb compare,
+			   hashdata_choose_cb choose, void *data)
+{
+	int index;
+	struct hlist_head *head;
+	struct hlist_node *walk, *safe;
+	struct element_t *bucket;
+
+	if (!hash)
+		return -1;
+
+	index = choose(data, hash->size);
+	head = &hash->table[index];
+
+	hlist_for_each_safe(walk, safe, head) {
+		bucket = hlist_entry(walk, struct element_t, hlist);
+		if (compare(bucket->data, data))
+			return -1;
+	}
+
+	/* no duplicate found in list, add new element */
+	bucket = kmalloc(sizeof(struct element_t), GFP_ATOMIC);
+
+	if (!bucket)
+		return -1;
+
+	bucket->data = data;
+	hlist_add_head(&bucket->hlist, head);
+
+	return 0;
+}
+
+/* removes data from hash, if found. returns pointer do data on success, so you
+ * can remove the used structure yourself, or NULL on error .  data could be the
+ * structure you use with just the key filled, we just need the key for
+ * comparing. */
+static inline void *hash_remove(struct hashtable_t *hash,
+				hashdata_compare_cb compare,
+				hashdata_choose_cb choose, void *data)
+{
+	size_t index;
+	struct hlist_node *walk;
+	struct element_t *bucket;
+	struct hlist_head *head;
+	void *data_save;
+
+	index = choose(data, hash->size);
+	head = &hash->table[index];
+
+	hlist_for_each_entry(bucket, walk, head, hlist) {
+		if (compare(bucket->data, data)) {
+			data_save = bucket->data;
+			hlist_del(walk);
+			kfree(bucket);
+			return data_save;
+		}
+	}
+
+	return NULL;
+}
+
+/* finds data, based on the key in keydata. returns the found data on success,
+ * or NULL on error */
+static inline void *hash_find(struct hashtable_t *hash,
+			      hashdata_compare_cb compare,
+			      hashdata_choose_cb choose, void *keydata)
+{
+	int index;
+	struct hlist_head *head;
+	struct hlist_node *walk;
+	struct element_t *bucket;
+
+	if (!hash)
+		return NULL;
+
+	index = choose(keydata , hash->size);
+	head = &hash->table[index];
+
+	hlist_for_each(walk, head) {
+		bucket = hlist_entry(walk, struct element_t, hlist);
+		if (compare(bucket->data, keydata))
+			return bucket->data;
+	}
+
+	return NULL;
+}
+
+#endif /* _NET_BATMAN_ADV_HASH_H_ */
diff --git a/net/batman-adv/icmp_socket.c b/net/batman-adv/icmp_socket.c
new file mode 100644
index 00000000000..ecf6d7ffab2
--- /dev/null
+++ b/net/batman-adv/icmp_socket.c
@@ -0,0 +1,356 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include "icmp_socket.h"
+#include "send.h"
+#include "types.h"
+#include "hash.h"
+#include "originator.h"
+#include "hard-interface.h"
+
+static struct socket_client *socket_client_hash[256];
+
+static void bat_socket_add_packet(struct socket_client *socket_client,
+				  struct icmp_packet_rr *icmp_packet,
+				  size_t icmp_len);
+
+void bat_socket_init(void)
+{
+	memset(socket_client_hash, 0, sizeof(socket_client_hash));
+}
+
+static int bat_socket_open(struct inode *inode, struct file *file)
+{
+	unsigned int i;
+	struct socket_client *socket_client;
+
+	nonseekable_open(inode, file);
+
+	socket_client = kmalloc(sizeof(struct socket_client), GFP_KERNEL);
+
+	if (!socket_client)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(socket_client_hash); i++) {
+		if (!socket_client_hash[i]) {
+			socket_client_hash[i] = socket_client;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(socket_client_hash)) {
+		pr_err("Error - can't add another packet client: "
+		       "maximum number of clients reached\n");
+		kfree(socket_client);
+		return -EXFULL;
+	}
+
+	INIT_LIST_HEAD(&socket_client->queue_list);
+	socket_client->queue_len = 0;
+	socket_client->index = i;
+	socket_client->bat_priv = inode->i_private;
+	spin_lock_init(&socket_client->lock);
+	init_waitqueue_head(&socket_client->queue_wait);
+
+	file->private_data = socket_client;
+
+	inc_module_count();
+	return 0;
+}
+
+static int bat_socket_release(struct inode *inode, struct file *file)
+{
+	struct socket_client *socket_client = file->private_data;
+	struct socket_packet *socket_packet;
+	struct list_head *list_pos, *list_pos_tmp;
+
+	spin_lock_bh(&socket_client->lock);
+
+	/* for all packets in the queue ... */
+	list_for_each_safe(list_pos, list_pos_tmp, &socket_client->queue_list) {
+		socket_packet = list_entry(list_pos,
+					   struct socket_packet, list);
+
+		list_del(list_pos);
+		kfree(socket_packet);
+	}
+
+	socket_client_hash[socket_client->index] = NULL;
+	spin_unlock_bh(&socket_client->lock);
+
+	kfree(socket_client);
+	dec_module_count();
+
+	return 0;
+}
+
+static ssize_t bat_socket_read(struct file *file, char __user *buf,
+			       size_t count, loff_t *ppos)
+{
+	struct socket_client *socket_client = file->private_data;
+	struct socket_packet *socket_packet;
+	size_t packet_len;
+	int error;
+
+	if ((file->f_flags & O_NONBLOCK) && (socket_client->queue_len == 0))
+		return -EAGAIN;
+
+	if ((!buf) || (count < sizeof(struct icmp_packet)))
+		return -EINVAL;
+
+	if (!access_ok(VERIFY_WRITE, buf, count))
+		return -EFAULT;
+
+	error = wait_event_interruptible(socket_client->queue_wait,
+					 socket_client->queue_len);
+
+	if (error)
+		return error;
+
+	spin_lock_bh(&socket_client->lock);
+
+	socket_packet = list_first_entry(&socket_client->queue_list,
+					 struct socket_packet, list);
+	list_del(&socket_packet->list);
+	socket_client->queue_len--;
+
+	spin_unlock_bh(&socket_client->lock);
+
+	error = __copy_to_user(buf, &socket_packet->icmp_packet,
+			       socket_packet->icmp_len);
+
+	packet_len = socket_packet->icmp_len;
+	kfree(socket_packet);
+
+	if (error)
+		return -EFAULT;
+
+	return packet_len;
+}
+
+static ssize_t bat_socket_write(struct file *file, const char __user *buff,
+				size_t len, loff_t *off)
+{
+	struct socket_client *socket_client = file->private_data;
+	struct bat_priv *bat_priv = socket_client->bat_priv;
+	struct sk_buff *skb;
+	struct icmp_packet_rr *icmp_packet;
+
+	struct orig_node *orig_node;
+	struct batman_if *batman_if;
+	size_t packet_len = sizeof(struct icmp_packet);
+	uint8_t dstaddr[ETH_ALEN];
+
+	if (len < sizeof(struct icmp_packet)) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Error - can't send packet from char device: "
+			"invalid packet size\n");
+		return -EINVAL;
+	}
+
+	if (!bat_priv->primary_if)
+		return -EFAULT;
+
+	if (len >= sizeof(struct icmp_packet_rr))
+		packet_len = sizeof(struct icmp_packet_rr);
+
+	skb = dev_alloc_skb(packet_len + sizeof(struct ethhdr));
+	if (!skb)
+		return -ENOMEM;
+
+	skb_reserve(skb, sizeof(struct ethhdr));
+	icmp_packet = (struct icmp_packet_rr *)skb_put(skb, packet_len);
+
+	if (!access_ok(VERIFY_READ, buff, packet_len)) {
+		len = -EFAULT;
+		goto free_skb;
+	}
+
+	if (__copy_from_user(icmp_packet, buff, packet_len)) {
+		len = -EFAULT;
+		goto free_skb;
+	}
+
+	if (icmp_packet->packet_type != BAT_ICMP) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Error - can't send packet from char device: "
+			"got bogus packet type (expected: BAT_ICMP)\n");
+		len = -EINVAL;
+		goto free_skb;
+	}
+
+	if (icmp_packet->msg_type != ECHO_REQUEST) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Error - can't send packet from char device: "
+			"got bogus message type (expected: ECHO_REQUEST)\n");
+		len = -EINVAL;
+		goto free_skb;
+	}
+
+	icmp_packet->uid = socket_client->index;
+
+	if (icmp_packet->version != COMPAT_VERSION) {
+		icmp_packet->msg_type = PARAMETER_PROBLEM;
+		icmp_packet->ttl = COMPAT_VERSION;
+		bat_socket_add_packet(socket_client, icmp_packet, packet_len);
+		goto free_skb;
+	}
+
+	if (atomic_read(&bat_priv->mesh_state) != MESH_ACTIVE)
+		goto dst_unreach;
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	orig_node = ((struct orig_node *)hash_find(bat_priv->orig_hash,
+						   compare_orig, choose_orig,
+						   icmp_packet->dst));
+
+	if (!orig_node)
+		goto unlock;
+
+	if (!orig_node->router)
+		goto unlock;
+
+	batman_if = orig_node->router->if_incoming;
+	memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	if (!batman_if)
+		goto dst_unreach;
+
+	if (batman_if->if_status != IF_ACTIVE)
+		goto dst_unreach;
+
+	memcpy(icmp_packet->orig,
+	       bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+
+	if (packet_len == sizeof(struct icmp_packet_rr))
+		memcpy(icmp_packet->rr, batman_if->net_dev->dev_addr, ETH_ALEN);
+
+
+	send_skb_packet(skb, batman_if, dstaddr);
+
+	goto out;
+
+unlock:
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+dst_unreach:
+	icmp_packet->msg_type = DESTINATION_UNREACHABLE;
+	bat_socket_add_packet(socket_client, icmp_packet, packet_len);
+free_skb:
+	kfree_skb(skb);
+out:
+	return len;
+}
+
+static unsigned int bat_socket_poll(struct file *file, poll_table *wait)
+{
+	struct socket_client *socket_client = file->private_data;
+
+	poll_wait(file, &socket_client->queue_wait, wait);
+
+	if (socket_client->queue_len > 0)
+		return POLLIN | POLLRDNORM;
+
+	return 0;
+}
+
+static const struct file_operations fops = {
+	.owner = THIS_MODULE,
+	.open = bat_socket_open,
+	.release = bat_socket_release,
+	.read = bat_socket_read,
+	.write = bat_socket_write,
+	.poll = bat_socket_poll,
+	.llseek = no_llseek,
+};
+
+int bat_socket_setup(struct bat_priv *bat_priv)
+{
+	struct dentry *d;
+
+	if (!bat_priv->debug_dir)
+		goto err;
+
+	d = debugfs_create_file(ICMP_SOCKET, S_IFREG | S_IWUSR | S_IRUSR,
+				bat_priv->debug_dir, bat_priv, &fops);
+	if (d)
+		goto err;
+
+	return 0;
+
+err:
+	return 1;
+}
+
+static void bat_socket_add_packet(struct socket_client *socket_client,
+				  struct icmp_packet_rr *icmp_packet,
+				  size_t icmp_len)
+{
+	struct socket_packet *socket_packet;
+
+	socket_packet = kmalloc(sizeof(struct socket_packet), GFP_ATOMIC);
+
+	if (!socket_packet)
+		return;
+
+	INIT_LIST_HEAD(&socket_packet->list);
+	memcpy(&socket_packet->icmp_packet, icmp_packet, icmp_len);
+	socket_packet->icmp_len = icmp_len;
+
+	spin_lock_bh(&socket_client->lock);
+
+	/* while waiting for the lock the socket_client could have been
+	 * deleted */
+	if (!socket_client_hash[icmp_packet->uid]) {
+		spin_unlock_bh(&socket_client->lock);
+		kfree(socket_packet);
+		return;
+	}
+
+	list_add_tail(&socket_packet->list, &socket_client->queue_list);
+	socket_client->queue_len++;
+
+	if (socket_client->queue_len > 100) {
+		socket_packet = list_first_entry(&socket_client->queue_list,
+						 struct socket_packet, list);
+
+		list_del(&socket_packet->list);
+		kfree(socket_packet);
+		socket_client->queue_len--;
+	}
+
+	spin_unlock_bh(&socket_client->lock);
+
+	wake_up(&socket_client->queue_wait);
+}
+
+void bat_socket_receive_packet(struct icmp_packet_rr *icmp_packet,
+			       size_t icmp_len)
+{
+	struct socket_client *hash = socket_client_hash[icmp_packet->uid];
+
+	if (hash)
+		bat_socket_add_packet(hash, icmp_packet, icmp_len);
+}
diff --git a/net/batman-adv/icmp_socket.h b/net/batman-adv/icmp_socket.h
new file mode 100644
index 00000000000..bf9b348cde2
--- /dev/null
+++ b/net/batman-adv/icmp_socket.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_ICMP_SOCKET_H_
+#define _NET_BATMAN_ADV_ICMP_SOCKET_H_
+
+#include "types.h"
+
+#define ICMP_SOCKET "socket"
+
+void bat_socket_init(void);
+int bat_socket_setup(struct bat_priv *bat_priv);
+void bat_socket_receive_packet(struct icmp_packet_rr *icmp_packet,
+			       size_t icmp_len);
+
+#endif /* _NET_BATMAN_ADV_ICMP_SOCKET_H_ */
diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c
new file mode 100644
index 00000000000..b827f6a158c
--- /dev/null
+++ b/net/batman-adv/main.c
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "bat_sysfs.h"
+#include "bat_debugfs.h"
+#include "routing.h"
+#include "send.h"
+#include "originator.h"
+#include "soft-interface.h"
+#include "icmp_socket.h"
+#include "translation-table.h"
+#include "hard-interface.h"
+#include "gateway_client.h"
+#include "types.h"
+#include "vis.h"
+#include "hash.h"
+
+struct list_head if_list;
+
+unsigned char broadcast_addr[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+struct workqueue_struct *bat_event_workqueue;
+
+static int __init batman_init(void)
+{
+	INIT_LIST_HEAD(&if_list);
+
+	/* the name should not be longer than 10 chars - see
+	 * http://lwn.net/Articles/23634/ */
+	bat_event_workqueue = create_singlethread_workqueue("bat_events");
+
+	if (!bat_event_workqueue)
+		return -ENOMEM;
+
+	bat_socket_init();
+	debugfs_init();
+
+	register_netdevice_notifier(&hard_if_notifier);
+
+	pr_info("B.A.T.M.A.N. advanced %s%s (compatibility version %i) "
+		"loaded\n", SOURCE_VERSION, REVISION_VERSION_STR,
+		COMPAT_VERSION);
+
+	return 0;
+}
+
+static void __exit batman_exit(void)
+{
+	debugfs_destroy();
+	unregister_netdevice_notifier(&hard_if_notifier);
+	hardif_remove_interfaces();
+
+	flush_workqueue(bat_event_workqueue);
+	destroy_workqueue(bat_event_workqueue);
+	bat_event_workqueue = NULL;
+
+	rcu_barrier();
+}
+
+int mesh_init(struct net_device *soft_iface)
+{
+	struct bat_priv *bat_priv = netdev_priv(soft_iface);
+
+	spin_lock_init(&bat_priv->orig_hash_lock);
+	spin_lock_init(&bat_priv->forw_bat_list_lock);
+	spin_lock_init(&bat_priv->forw_bcast_list_lock);
+	spin_lock_init(&bat_priv->hna_lhash_lock);
+	spin_lock_init(&bat_priv->hna_ghash_lock);
+	spin_lock_init(&bat_priv->gw_list_lock);
+	spin_lock_init(&bat_priv->vis_hash_lock);
+	spin_lock_init(&bat_priv->vis_list_lock);
+	spin_lock_init(&bat_priv->softif_neigh_lock);
+
+	INIT_HLIST_HEAD(&bat_priv->forw_bat_list);
+	INIT_HLIST_HEAD(&bat_priv->forw_bcast_list);
+	INIT_HLIST_HEAD(&bat_priv->gw_list);
+	INIT_HLIST_HEAD(&bat_priv->softif_neigh_list);
+
+	if (originator_init(bat_priv) < 1)
+		goto err;
+
+	if (hna_local_init(bat_priv) < 1)
+		goto err;
+
+	if (hna_global_init(bat_priv) < 1)
+		goto err;
+
+	hna_local_add(soft_iface, soft_iface->dev_addr);
+
+	if (vis_init(bat_priv) < 1)
+		goto err;
+
+	atomic_set(&bat_priv->mesh_state, MESH_ACTIVE);
+	goto end;
+
+err:
+	pr_err("Unable to allocate memory for mesh information structures: "
+	       "out of mem ?\n");
+	mesh_free(soft_iface);
+	return -1;
+
+end:
+	return 0;
+}
+
+void mesh_free(struct net_device *soft_iface)
+{
+	struct bat_priv *bat_priv = netdev_priv(soft_iface);
+
+	atomic_set(&bat_priv->mesh_state, MESH_DEACTIVATING);
+
+	purge_outstanding_packets(bat_priv, NULL);
+
+	vis_quit(bat_priv);
+
+	gw_node_purge(bat_priv);
+	originator_free(bat_priv);
+
+	hna_local_free(bat_priv);
+	hna_global_free(bat_priv);
+
+	softif_neigh_purge(bat_priv);
+
+	atomic_set(&bat_priv->mesh_state, MESH_INACTIVE);
+}
+
+void inc_module_count(void)
+{
+	try_module_get(THIS_MODULE);
+}
+
+void dec_module_count(void)
+{
+	module_put(THIS_MODULE);
+}
+
+int is_my_mac(uint8_t *addr)
+{
+	struct batman_if *batman_if;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(batman_if, &if_list, list) {
+		if (batman_if->if_status != IF_ACTIVE)
+			continue;
+
+		if (compare_orig(batman_if->net_dev->dev_addr, addr)) {
+			rcu_read_unlock();
+			return 1;
+		}
+	}
+	rcu_read_unlock();
+	return 0;
+
+}
+
+module_init(batman_init);
+module_exit(batman_exit);
+
+MODULE_LICENSE("GPL");
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_SUPPORTED_DEVICE(DRIVER_DEVICE);
+#ifdef REVISION_VERSION
+MODULE_VERSION(SOURCE_VERSION "-" REVISION_VERSION);
+#else
+MODULE_VERSION(SOURCE_VERSION);
+#endif
diff --git a/net/batman-adv/main.h b/net/batman-adv/main.h
new file mode 100644
index 00000000000..d4d9926c220
--- /dev/null
+++ b/net/batman-adv/main.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_MAIN_H_
+#define _NET_BATMAN_ADV_MAIN_H_
+
+/* Kernel Programming */
+#define LINUX
+
+#define DRIVER_AUTHOR "Marek Lindner <lindner_marek@yahoo.de>, " \
+		      "Simon Wunderlich <siwu@hrz.tu-chemnitz.de>"
+#define DRIVER_DESC   "B.A.T.M.A.N. advanced"
+#define DRIVER_DEVICE "batman-adv"
+
+#define SOURCE_VERSION "next"
+
+
+/* B.A.T.M.A.N. parameters */
+
+#define TQ_MAX_VALUE 255
+#define JITTER 20
+#define TTL 50			  /* Time To Live of broadcast messages */
+
+#define PURGE_TIMEOUT 200	/* purge originators after time in seconds if no
+				   * valid packet comes in -> TODO: check
+				   * influence on TQ_LOCAL_WINDOW_SIZE */
+#define LOCAL_HNA_TIMEOUT 3600 /* in seconds */
+
+#define TQ_LOCAL_WINDOW_SIZE 64	  /* sliding packet range of received originator
+				   * messages in squence numbers (should be a
+				   * multiple of our word size) */
+#define TQ_GLOBAL_WINDOW_SIZE 5
+#define TQ_LOCAL_BIDRECT_SEND_MINIMUM 1
+#define TQ_LOCAL_BIDRECT_RECV_MINIMUM 1
+#define TQ_TOTAL_BIDRECT_LIMIT 1
+
+#define NUM_WORDS (TQ_LOCAL_WINDOW_SIZE / WORD_BIT_SIZE)
+
+#define PACKBUFF_SIZE 2000
+#define LOG_BUF_LEN 8192	  /* has to be a power of 2 */
+
+#define VIS_INTERVAL 5000	/* 5 seconds */
+
+/* how much worse secondary interfaces may be to
+ * to be considered as bonding candidates */
+
+#define BONDING_TQ_THRESHOLD	50
+
+#define MAX_AGGREGATION_BYTES 512 /* should not be bigger than 512 bytes or
+				   * change the size of
+				   * forw_packet->direct_link_flags */
+#define MAX_AGGREGATION_MS 100
+
+#define SOFTIF_NEIGH_TIMEOUT 180000 /* 3 minutes */
+
+#define RESET_PROTECTION_MS 30000
+#define EXPECTED_SEQNO_RANGE	65536
+/* don't reset again within 30 seconds */
+
+#define MESH_INACTIVE 0
+#define MESH_ACTIVE 1
+#define MESH_DEACTIVATING 2
+
+#define BCAST_QUEUE_LEN		256
+#define BATMAN_QUEUE_LEN	256
+
+/*
+ * Debug Messages
+ */
+#ifdef pr_fmt
+#undef pr_fmt
+#endif
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt /* Append 'batman-adv: ' before
+					     * kernel messages */
+
+#define DBG_BATMAN 1	/* all messages related to routing / flooding /
+			 * broadcasting / etc */
+#define DBG_ROUTES 2	/* route or hna added / changed / deleted */
+#define DBG_ALL 3
+
+#define LOG_BUF_LEN 8192          /* has to be a power of 2 */
+
+
+/*
+ *  Vis
+ */
+
+/* #define VIS_SUBCLUSTERS_DISABLED */
+
+/*
+ * Kernel headers
+ */
+
+#include <linux/mutex.h>	/* mutex */
+#include <linux/module.h>	/* needed by all modules */
+#include <linux/netdevice.h>	/* netdevice */
+#include <linux/etherdevice.h>  /* ethernet address classifaction */
+#include <linux/if_ether.h>	/* ethernet header */
+#include <linux/poll.h>		/* poll_table */
+#include <linux/kthread.h>	/* kernel threads */
+#include <linux/pkt_sched.h>	/* schedule types */
+#include <linux/workqueue.h>	/* workqueue */
+#include <linux/slab.h>
+#include <net/sock.h>		/* struct sock */
+#include <linux/jiffies.h>
+#include <linux/seq_file.h>
+#include "types.h"
+
+#ifndef REVISION_VERSION
+#define REVISION_VERSION_STR ""
+#else
+#define REVISION_VERSION_STR " "REVISION_VERSION
+#endif
+
+extern struct list_head if_list;
+
+extern unsigned char broadcast_addr[];
+extern struct workqueue_struct *bat_event_workqueue;
+
+int mesh_init(struct net_device *soft_iface);
+void mesh_free(struct net_device *soft_iface);
+void inc_module_count(void);
+void dec_module_count(void);
+int is_my_mac(uint8_t *addr);
+
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+int debug_log(struct bat_priv *bat_priv, char *fmt, ...);
+
+#define bat_dbg(type, bat_priv, fmt, arg...)			\
+	do {							\
+		if (atomic_read(&bat_priv->log_level) & type)	\
+			debug_log(bat_priv, fmt, ## arg);	\
+	}							\
+	while (0)
+#else /* !CONFIG_BATMAN_ADV_DEBUG */
+static inline void bat_dbg(char type __attribute__((unused)),
+			   struct bat_priv *bat_priv __attribute__((unused)),
+			   char *fmt __attribute__((unused)), ...)
+{
+}
+#endif
+
+#define bat_warning(net_dev, fmt, arg...)				\
+	do {								\
+		struct net_device *_netdev = (net_dev);                 \
+		struct bat_priv *_batpriv = netdev_priv(_netdev);       \
+		bat_dbg(DBG_ALL, _batpriv, fmt, ## arg);		\
+		pr_warning("%s: " fmt, _netdev->name, ## arg);		\
+	} while (0)
+#define bat_info(net_dev, fmt, arg...)					\
+	do {								\
+		struct net_device *_netdev = (net_dev);                 \
+		struct bat_priv *_batpriv = netdev_priv(_netdev);       \
+		bat_dbg(DBG_ALL, _batpriv, fmt, ## arg);		\
+		pr_info("%s: " fmt, _netdev->name, ## arg);		\
+	} while (0)
+#define bat_err(net_dev, fmt, arg...)					\
+	do {								\
+		struct net_device *_netdev = (net_dev);                 \
+		struct bat_priv *_batpriv = netdev_priv(_netdev);       \
+		bat_dbg(DBG_ALL, _batpriv, fmt, ## arg);		\
+		pr_err("%s: " fmt, _netdev->name, ## arg);		\
+	} while (0)
+
+#endif /* _NET_BATMAN_ADV_MAIN_H_ */
diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c
new file mode 100644
index 00000000000..6b7fb6b7e6f
--- /dev/null
+++ b/net/batman-adv/originator.c
@@ -0,0 +1,564 @@
+/*
+ * Copyright (C) 2009-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+/* increase the reference counter for this originator */
+
+#include "main.h"
+#include "originator.h"
+#include "hash.h"
+#include "translation-table.h"
+#include "routing.h"
+#include "gateway_client.h"
+#include "hard-interface.h"
+#include "unicast.h"
+#include "soft-interface.h"
+
+static void purge_orig(struct work_struct *work);
+
+static void start_purge_timer(struct bat_priv *bat_priv)
+{
+	INIT_DELAYED_WORK(&bat_priv->orig_work, purge_orig);
+	queue_delayed_work(bat_event_workqueue, &bat_priv->orig_work, 1 * HZ);
+}
+
+int originator_init(struct bat_priv *bat_priv)
+{
+	if (bat_priv->orig_hash)
+		return 1;
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	bat_priv->orig_hash = hash_new(1024);
+
+	if (!bat_priv->orig_hash)
+		goto err;
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+	start_purge_timer(bat_priv);
+	return 1;
+
+err:
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+	return 0;
+}
+
+struct neigh_node *
+create_neighbor(struct orig_node *orig_node, struct orig_node *orig_neigh_node,
+		uint8_t *neigh, struct batman_if *if_incoming)
+{
+	struct bat_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
+	struct neigh_node *neigh_node;
+
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Creating new last-hop neighbor of originator\n");
+
+	neigh_node = kzalloc(sizeof(struct neigh_node), GFP_ATOMIC);
+	if (!neigh_node)
+		return NULL;
+
+	INIT_LIST_HEAD(&neigh_node->list);
+
+	memcpy(neigh_node->addr, neigh, ETH_ALEN);
+	neigh_node->orig_node = orig_neigh_node;
+	neigh_node->if_incoming = if_incoming;
+
+	list_add_tail(&neigh_node->list, &orig_node->neigh_list);
+	return neigh_node;
+}
+
+static void free_orig_node(void *data, void *arg)
+{
+	struct list_head *list_pos, *list_pos_tmp;
+	struct neigh_node *neigh_node;
+	struct orig_node *orig_node = (struct orig_node *)data;
+	struct bat_priv *bat_priv = (struct bat_priv *)arg;
+
+	/* for all neighbors towards this originator ... */
+	list_for_each_safe(list_pos, list_pos_tmp, &orig_node->neigh_list) {
+		neigh_node = list_entry(list_pos, struct neigh_node, list);
+
+		list_del(list_pos);
+		kfree(neigh_node);
+	}
+
+	frag_list_free(&orig_node->frag_list);
+	hna_global_del_orig(bat_priv, orig_node, "originator timed out");
+
+	kfree(orig_node->bcast_own);
+	kfree(orig_node->bcast_own_sum);
+	kfree(orig_node);
+}
+
+void originator_free(struct bat_priv *bat_priv)
+{
+	if (!bat_priv->orig_hash)
+		return;
+
+	cancel_delayed_work_sync(&bat_priv->orig_work);
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	hash_delete(bat_priv->orig_hash, free_orig_node, bat_priv);
+	bat_priv->orig_hash = NULL;
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+}
+
+/* this function finds or creates an originator entry for the given
+ * address if it does not exits */
+struct orig_node *get_orig_node(struct bat_priv *bat_priv, uint8_t *addr)
+{
+	struct orig_node *orig_node;
+	int size;
+	int hash_added;
+
+	orig_node = ((struct orig_node *)hash_find(bat_priv->orig_hash,
+						   compare_orig, choose_orig,
+						   addr));
+
+	if (orig_node)
+		return orig_node;
+
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Creating new originator: %pM\n", addr);
+
+	orig_node = kzalloc(sizeof(struct orig_node), GFP_ATOMIC);
+	if (!orig_node)
+		return NULL;
+
+	INIT_LIST_HEAD(&orig_node->neigh_list);
+
+	memcpy(orig_node->orig, addr, ETH_ALEN);
+	orig_node->router = NULL;
+	orig_node->hna_buff = NULL;
+	orig_node->bcast_seqno_reset = jiffies - 1
+					- msecs_to_jiffies(RESET_PROTECTION_MS);
+	orig_node->batman_seqno_reset = jiffies - 1
+					- msecs_to_jiffies(RESET_PROTECTION_MS);
+
+	size = bat_priv->num_ifaces * sizeof(unsigned long) * NUM_WORDS;
+
+	orig_node->bcast_own = kzalloc(size, GFP_ATOMIC);
+	if (!orig_node->bcast_own)
+		goto free_orig_node;
+
+	size = bat_priv->num_ifaces * sizeof(uint8_t);
+	orig_node->bcast_own_sum = kzalloc(size, GFP_ATOMIC);
+
+	INIT_LIST_HEAD(&orig_node->frag_list);
+	orig_node->last_frag_packet = 0;
+
+	if (!orig_node->bcast_own_sum)
+		goto free_bcast_own;
+
+	hash_added = hash_add(bat_priv->orig_hash, compare_orig, choose_orig,
+			      orig_node);
+	if (hash_added < 0)
+		goto free_bcast_own_sum;
+
+	return orig_node;
+free_bcast_own_sum:
+	kfree(orig_node->bcast_own_sum);
+free_bcast_own:
+	kfree(orig_node->bcast_own);
+free_orig_node:
+	kfree(orig_node);
+	return NULL;
+}
+
+static bool purge_orig_neighbors(struct bat_priv *bat_priv,
+				 struct orig_node *orig_node,
+				 struct neigh_node **best_neigh_node)
+{
+	struct list_head *list_pos, *list_pos_tmp;
+	struct neigh_node *neigh_node;
+	bool neigh_purged = false;
+
+	*best_neigh_node = NULL;
+
+	/* for all neighbors towards this originator ... */
+	list_for_each_safe(list_pos, list_pos_tmp, &orig_node->neigh_list) {
+		neigh_node = list_entry(list_pos, struct neigh_node, list);
+
+		if ((time_after(jiffies,
+			neigh_node->last_valid + PURGE_TIMEOUT * HZ)) ||
+		    (neigh_node->if_incoming->if_status == IF_INACTIVE) ||
+		    (neigh_node->if_incoming->if_status == IF_TO_BE_REMOVED)) {
+
+			if (neigh_node->if_incoming->if_status ==
+							IF_TO_BE_REMOVED)
+				bat_dbg(DBG_BATMAN, bat_priv,
+					"neighbor purge: originator %pM, "
+					"neighbor: %pM, iface: %s\n",
+					orig_node->orig, neigh_node->addr,
+					neigh_node->if_incoming->net_dev->name);
+			else
+				bat_dbg(DBG_BATMAN, bat_priv,
+					"neighbor timeout: originator %pM, "
+					"neighbor: %pM, last_valid: %lu\n",
+					orig_node->orig, neigh_node->addr,
+					(neigh_node->last_valid / HZ));
+
+			neigh_purged = true;
+			list_del(list_pos);
+			kfree(neigh_node);
+		} else {
+			if ((!*best_neigh_node) ||
+			    (neigh_node->tq_avg > (*best_neigh_node)->tq_avg))
+				*best_neigh_node = neigh_node;
+		}
+	}
+	return neigh_purged;
+}
+
+static bool purge_orig_node(struct bat_priv *bat_priv,
+			    struct orig_node *orig_node)
+{
+	struct neigh_node *best_neigh_node;
+
+	if (time_after(jiffies,
+		orig_node->last_valid + 2 * PURGE_TIMEOUT * HZ)) {
+
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Originator timeout: originator %pM, last_valid %lu\n",
+			orig_node->orig, (orig_node->last_valid / HZ));
+		return true;
+	} else {
+		if (purge_orig_neighbors(bat_priv, orig_node,
+							&best_neigh_node)) {
+			update_routes(bat_priv, orig_node,
+				      best_neigh_node,
+				      orig_node->hna_buff,
+				      orig_node->hna_buff_len);
+			/* update bonding candidates, we could have lost
+			 * some candidates. */
+			update_bonding_candidates(bat_priv, orig_node);
+		}
+	}
+
+	return false;
+}
+
+static void _purge_orig(struct bat_priv *bat_priv)
+{
+	struct hashtable_t *hash = bat_priv->orig_hash;
+	struct hlist_node *walk, *safe;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	struct orig_node *orig_node;
+	int i;
+
+	if (!hash)
+		return;
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+
+	/* for all origins... */
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry_safe(bucket, walk, safe, head, hlist) {
+			orig_node = bucket->data;
+
+			if (purge_orig_node(bat_priv, orig_node)) {
+				if (orig_node->gw_flags)
+					gw_node_delete(bat_priv, orig_node);
+				hlist_del(walk);
+				kfree(bucket);
+				free_orig_node(orig_node, bat_priv);
+			}
+
+			if (time_after(jiffies, orig_node->last_frag_packet +
+						msecs_to_jiffies(FRAG_TIMEOUT)))
+				frag_list_free(&orig_node->frag_list);
+		}
+	}
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	gw_node_purge(bat_priv);
+	gw_election(bat_priv);
+
+	softif_neigh_purge(bat_priv);
+}
+
+static void purge_orig(struct work_struct *work)
+{
+	struct delayed_work *delayed_work =
+		container_of(work, struct delayed_work, work);
+	struct bat_priv *bat_priv =
+		container_of(delayed_work, struct bat_priv, orig_work);
+
+	_purge_orig(bat_priv);
+	start_purge_timer(bat_priv);
+}
+
+void purge_orig_ref(struct bat_priv *bat_priv)
+{
+	_purge_orig(bat_priv);
+}
+
+int orig_seq_print_text(struct seq_file *seq, void *offset)
+{
+	struct net_device *net_dev = (struct net_device *)seq->private;
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	struct hashtable_t *hash = bat_priv->orig_hash;
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	struct orig_node *orig_node;
+	struct neigh_node *neigh_node;
+	int batman_count = 0;
+	int last_seen_secs;
+	int last_seen_msecs;
+	int i;
+
+	if ((!bat_priv->primary_if) ||
+	    (bat_priv->primary_if->if_status != IF_ACTIVE)) {
+		if (!bat_priv->primary_if)
+			return seq_printf(seq, "BATMAN mesh %s disabled - "
+				     "please specify interfaces to enable it\n",
+				     net_dev->name);
+
+		return seq_printf(seq, "BATMAN mesh %s "
+				  "disabled - primary interface not active\n",
+				  net_dev->name);
+	}
+
+	seq_printf(seq, "[B.A.T.M.A.N. adv %s%s, MainIF/MAC: %s/%pM (%s)]\n",
+		   SOURCE_VERSION, REVISION_VERSION_STR,
+		   bat_priv->primary_if->net_dev->name,
+		   bat_priv->primary_if->net_dev->dev_addr, net_dev->name);
+	seq_printf(seq, "  %-15s %s (%s/%i) %17s [%10s]: %20s ...\n",
+		   "Originator", "last-seen", "#", TQ_MAX_VALUE, "Nexthop",
+		   "outgoingIF", "Potential nexthops");
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			orig_node = bucket->data;
+
+			if (!orig_node->router)
+				continue;
+
+			if (orig_node->router->tq_avg == 0)
+				continue;
+
+			last_seen_secs = jiffies_to_msecs(jiffies -
+						orig_node->last_valid) / 1000;
+			last_seen_msecs = jiffies_to_msecs(jiffies -
+						orig_node->last_valid) % 1000;
+
+			neigh_node = orig_node->router;
+			seq_printf(seq, "%pM %4i.%03is   (%3i) %pM [%10s]:",
+				   orig_node->orig, last_seen_secs,
+				   last_seen_msecs, neigh_node->tq_avg,
+				   neigh_node->addr,
+				   neigh_node->if_incoming->net_dev->name);
+
+			list_for_each_entry(neigh_node, &orig_node->neigh_list,
+					    list) {
+				seq_printf(seq, " %pM (%3i)", neigh_node->addr,
+						neigh_node->tq_avg);
+			}
+
+			seq_printf(seq, "\n");
+			batman_count++;
+		}
+	}
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	if ((batman_count == 0))
+		seq_printf(seq, "No batman nodes in range ...\n");
+
+	return 0;
+}
+
+static int orig_node_add_if(struct orig_node *orig_node, int max_if_num)
+{
+	void *data_ptr;
+
+	data_ptr = kmalloc(max_if_num * sizeof(unsigned long) * NUM_WORDS,
+			   GFP_ATOMIC);
+	if (!data_ptr) {
+		pr_err("Can't resize orig: out of memory\n");
+		return -1;
+	}
+
+	memcpy(data_ptr, orig_node->bcast_own,
+	       (max_if_num - 1) * sizeof(unsigned long) * NUM_WORDS);
+	kfree(orig_node->bcast_own);
+	orig_node->bcast_own = data_ptr;
+
+	data_ptr = kmalloc(max_if_num * sizeof(uint8_t), GFP_ATOMIC);
+	if (!data_ptr) {
+		pr_err("Can't resize orig: out of memory\n");
+		return -1;
+	}
+
+	memcpy(data_ptr, orig_node->bcast_own_sum,
+	       (max_if_num - 1) * sizeof(uint8_t));
+	kfree(orig_node->bcast_own_sum);
+	orig_node->bcast_own_sum = data_ptr;
+
+	return 0;
+}
+
+int orig_hash_add_if(struct batman_if *batman_if, int max_if_num)
+{
+	struct bat_priv *bat_priv = netdev_priv(batman_if->soft_iface);
+	struct hashtable_t *hash = bat_priv->orig_hash;
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	struct orig_node *orig_node;
+	int i;
+
+	/* resize all orig nodes because orig_node->bcast_own(_sum) depend on
+	 * if_num */
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			orig_node = bucket->data;
+
+			if (orig_node_add_if(orig_node, max_if_num) == -1)
+				goto err;
+		}
+	}
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+	return 0;
+
+err:
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+	return -ENOMEM;
+}
+
+static int orig_node_del_if(struct orig_node *orig_node,
+		     int max_if_num, int del_if_num)
+{
+	void *data_ptr = NULL;
+	int chunk_size;
+
+	/* last interface was removed */
+	if (max_if_num == 0)
+		goto free_bcast_own;
+
+	chunk_size = sizeof(unsigned long) * NUM_WORDS;
+	data_ptr = kmalloc(max_if_num * chunk_size, GFP_ATOMIC);
+	if (!data_ptr) {
+		pr_err("Can't resize orig: out of memory\n");
+		return -1;
+	}
+
+	/* copy first part */
+	memcpy(data_ptr, orig_node->bcast_own, del_if_num * chunk_size);
+
+	/* copy second part */
+	memcpy(data_ptr + del_if_num * chunk_size,
+	       orig_node->bcast_own + ((del_if_num + 1) * chunk_size),
+	       (max_if_num - del_if_num) * chunk_size);
+
+free_bcast_own:
+	kfree(orig_node->bcast_own);
+	orig_node->bcast_own = data_ptr;
+
+	if (max_if_num == 0)
+		goto free_own_sum;
+
+	data_ptr = kmalloc(max_if_num * sizeof(uint8_t), GFP_ATOMIC);
+	if (!data_ptr) {
+		pr_err("Can't resize orig: out of memory\n");
+		return -1;
+	}
+
+	memcpy(data_ptr, orig_node->bcast_own_sum,
+	       del_if_num * sizeof(uint8_t));
+
+	memcpy(data_ptr + del_if_num * sizeof(uint8_t),
+	       orig_node->bcast_own_sum + ((del_if_num + 1) * sizeof(uint8_t)),
+	       (max_if_num - del_if_num) * sizeof(uint8_t));
+
+free_own_sum:
+	kfree(orig_node->bcast_own_sum);
+	orig_node->bcast_own_sum = data_ptr;
+
+	return 0;
+}
+
+int orig_hash_del_if(struct batman_if *batman_if, int max_if_num)
+{
+	struct bat_priv *bat_priv = netdev_priv(batman_if->soft_iface);
+	struct hashtable_t *hash = bat_priv->orig_hash;
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	struct batman_if *batman_if_tmp;
+	struct orig_node *orig_node;
+	int i, ret;
+
+	/* resize all orig nodes because orig_node->bcast_own(_sum) depend on
+	 * if_num */
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			orig_node = bucket->data;
+
+			ret = orig_node_del_if(orig_node, max_if_num,
+					batman_if->if_num);
+
+			if (ret == -1)
+				goto err;
+		}
+	}
+
+	/* renumber remaining batman interfaces _inside_ of orig_hash_lock */
+	rcu_read_lock();
+	list_for_each_entry_rcu(batman_if_tmp, &if_list, list) {
+		if (batman_if_tmp->if_status == IF_NOT_IN_USE)
+			continue;
+
+		if (batman_if == batman_if_tmp)
+			continue;
+
+		if (batman_if->soft_iface != batman_if_tmp->soft_iface)
+			continue;
+
+		if (batman_if_tmp->if_num > batman_if->if_num)
+			batman_if_tmp->if_num--;
+	}
+	rcu_read_unlock();
+
+	batman_if->if_num = -1;
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+	return 0;
+
+err:
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+	return -ENOMEM;
+}
diff --git a/net/batman-adv/originator.h b/net/batman-adv/originator.h
new file mode 100644
index 00000000000..d474ceb2a4e
--- /dev/null
+++ b/net/batman-adv/originator.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_ORIGINATOR_H_
+#define _NET_BATMAN_ADV_ORIGINATOR_H_
+
+int originator_init(struct bat_priv *bat_priv);
+void originator_free(struct bat_priv *bat_priv);
+void purge_orig_ref(struct bat_priv *bat_priv);
+struct orig_node *get_orig_node(struct bat_priv *bat_priv, uint8_t *addr);
+struct neigh_node *
+create_neighbor(struct orig_node *orig_node, struct orig_node *orig_neigh_node,
+		uint8_t *neigh, struct batman_if *if_incoming);
+int orig_seq_print_text(struct seq_file *seq, void *offset);
+int orig_hash_add_if(struct batman_if *batman_if, int max_if_num);
+int orig_hash_del_if(struct batman_if *batman_if, int max_if_num);
+
+
+/* returns 1 if they are the same originator */
+static inline int compare_orig(void *data1, void *data2)
+{
+	return (memcmp(data1, data2, ETH_ALEN) == 0 ? 1 : 0);
+}
+
+/* hashfunction to choose an entry in a hash table of given size */
+/* hash algorithm from http://en.wikipedia.org/wiki/Hash_table */
+static inline int choose_orig(void *data, int32_t size)
+{
+	unsigned char *key = data;
+	uint32_t hash = 0;
+	size_t i;
+
+	for (i = 0; i < 6; i++) {
+		hash += key[i];
+		hash += (hash << 10);
+		hash ^= (hash >> 6);
+	}
+
+	hash += (hash << 3);
+	hash ^= (hash >> 11);
+	hash += (hash << 15);
+
+	return hash % size;
+}
+
+#endif /* _NET_BATMAN_ADV_ORIGINATOR_H_ */
diff --git a/net/batman-adv/packet.h b/net/batman-adv/packet.h
new file mode 100644
index 00000000000..b49fdf70a6d
--- /dev/null
+++ b/net/batman-adv/packet.h
@@ -0,0 +1,136 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_PACKET_H_
+#define _NET_BATMAN_ADV_PACKET_H_
+
+#define ETH_P_BATMAN  0x4305	/* unofficial/not registered Ethertype */
+
+#define BAT_PACKET       0x01
+#define BAT_ICMP         0x02
+#define BAT_UNICAST      0x03
+#define BAT_BCAST        0x04
+#define BAT_VIS          0x05
+#define BAT_UNICAST_FRAG 0x06
+
+/* this file is included by batctl which needs these defines */
+#define COMPAT_VERSION 12
+#define DIRECTLINK 0x40
+#define VIS_SERVER 0x20
+#define PRIMARIES_FIRST_HOP 0x10
+
+/* ICMP message types */
+#define ECHO_REPLY 0
+#define DESTINATION_UNREACHABLE 3
+#define ECHO_REQUEST 8
+#define TTL_EXCEEDED 11
+#define PARAMETER_PROBLEM 12
+
+/* vis defines */
+#define VIS_TYPE_SERVER_SYNC		0
+#define VIS_TYPE_CLIENT_UPDATE		1
+
+/* fragmentation defines */
+#define UNI_FRAG_HEAD 0x01
+
+struct batman_packet {
+	uint8_t  packet_type;
+	uint8_t  version;  /* batman version field */
+	uint8_t  flags;    /* 0x40: DIRECTLINK flag, 0x20 VIS_SERVER flag... */
+	uint8_t  tq;
+	uint32_t seqno;
+	uint8_t  orig[6];
+	uint8_t  prev_sender[6];
+	uint8_t  ttl;
+	uint8_t  num_hna;
+	uint8_t  gw_flags;  /* flags related to gateway class */
+	uint8_t  align;
+} __attribute__((packed));
+
+#define BAT_PACKET_LEN sizeof(struct batman_packet)
+
+struct icmp_packet {
+	uint8_t  packet_type;
+	uint8_t  version;  /* batman version field */
+	uint8_t  msg_type; /* see ICMP message types above */
+	uint8_t  ttl;
+	uint8_t  dst[6];
+	uint8_t  orig[6];
+	uint16_t seqno;
+	uint8_t  uid;
+} __attribute__((packed));
+
+#define BAT_RR_LEN 16
+
+/* icmp_packet_rr must start with all fields from imcp_packet
+ * as this is assumed by code that handles ICMP packets */
+struct icmp_packet_rr {
+	uint8_t  packet_type;
+	uint8_t  version;  /* batman version field */
+	uint8_t  msg_type; /* see ICMP message types above */
+	uint8_t  ttl;
+	uint8_t  dst[6];
+	uint8_t  orig[6];
+	uint16_t seqno;
+	uint8_t  uid;
+	uint8_t  rr_cur;
+	uint8_t  rr[BAT_RR_LEN][ETH_ALEN];
+} __attribute__((packed));
+
+struct unicast_packet {
+	uint8_t  packet_type;
+	uint8_t  version;  /* batman version field */
+	uint8_t  dest[6];
+	uint8_t  ttl;
+} __attribute__((packed));
+
+struct unicast_frag_packet {
+	uint8_t  packet_type;
+	uint8_t  version;  /* batman version field */
+	uint8_t  dest[6];
+	uint8_t  ttl;
+	uint8_t  flags;
+	uint8_t  orig[6];
+	uint16_t seqno;
+} __attribute__((packed));
+
+struct bcast_packet {
+	uint8_t  packet_type;
+	uint8_t  version;  /* batman version field */
+	uint8_t  orig[6];
+	uint8_t  ttl;
+	uint32_t seqno;
+} __attribute__((packed));
+
+struct vis_packet {
+	uint8_t  packet_type;
+	uint8_t  version;        /* batman version field */
+	uint8_t  vis_type;	 /* which type of vis-participant sent this? */
+	uint8_t  entries;	 /* number of entries behind this struct */
+	uint32_t seqno;		 /* sequence number */
+	uint8_t  ttl;		 /* TTL */
+	uint8_t  vis_orig[6];	 /* originator that informs about its
+				  * neighbors */
+	uint8_t  target_orig[6]; /* who should receive this packet */
+	uint8_t  sender_orig[6]; /* who sent or rebroadcasted this packet */
+} __attribute__((packed));
+
+#endif /* _NET_BATMAN_ADV_PACKET_H_ */
diff --git a/net/batman-adv/ring_buffer.c b/net/batman-adv/ring_buffer.c
new file mode 100644
index 00000000000..defd37c9be1
--- /dev/null
+++ b/net/batman-adv/ring_buffer.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "ring_buffer.h"
+
+void ring_buffer_set(uint8_t lq_recv[], uint8_t *lq_index, uint8_t value)
+{
+	lq_recv[*lq_index] = value;
+	*lq_index = (*lq_index + 1) % TQ_GLOBAL_WINDOW_SIZE;
+}
+
+uint8_t ring_buffer_avg(uint8_t lq_recv[])
+{
+	uint8_t *ptr;
+	uint16_t count = 0, i = 0, sum = 0;
+
+	ptr = lq_recv;
+
+	while (i < TQ_GLOBAL_WINDOW_SIZE) {
+		if (*ptr != 0) {
+			count++;
+			sum += *ptr;
+		}
+
+		i++;
+		ptr++;
+	}
+
+	if (count == 0)
+		return 0;
+
+	return (uint8_t)(sum / count);
+}
diff --git a/net/batman-adv/ring_buffer.h b/net/batman-adv/ring_buffer.h
new file mode 100644
index 00000000000..6b0cb9aaeba
--- /dev/null
+++ b/net/batman-adv/ring_buffer.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_RING_BUFFER_H_
+#define _NET_BATMAN_ADV_RING_BUFFER_H_
+
+void ring_buffer_set(uint8_t lq_recv[], uint8_t *lq_index, uint8_t value);
+uint8_t ring_buffer_avg(uint8_t lq_recv[]);
+
+#endif /* _NET_BATMAN_ADV_RING_BUFFER_H_ */
diff --git a/net/batman-adv/routing.c b/net/batman-adv/routing.c
new file mode 100644
index 00000000000..8828eddd3f7
--- /dev/null
+++ b/net/batman-adv/routing.c
@@ -0,0 +1,1397 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "routing.h"
+#include "send.h"
+#include "hash.h"
+#include "soft-interface.h"
+#include "hard-interface.h"
+#include "icmp_socket.h"
+#include "translation-table.h"
+#include "originator.h"
+#include "types.h"
+#include "ring_buffer.h"
+#include "vis.h"
+#include "aggregation.h"
+#include "gateway_common.h"
+#include "gateway_client.h"
+#include "unicast.h"
+
+void slide_own_bcast_window(struct batman_if *batman_if)
+{
+	struct bat_priv *bat_priv = netdev_priv(batman_if->soft_iface);
+	struct hashtable_t *hash = bat_priv->orig_hash;
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	struct orig_node *orig_node;
+	unsigned long *word;
+	int i;
+	size_t word_index;
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			orig_node = bucket->data;
+			word_index = batman_if->if_num * NUM_WORDS;
+			word = &(orig_node->bcast_own[word_index]);
+
+			bit_get_packet(bat_priv, word, 1, 0);
+			orig_node->bcast_own_sum[batman_if->if_num] =
+				bit_packet_count(word);
+		}
+	}
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+}
+
+static void update_HNA(struct bat_priv *bat_priv, struct orig_node *orig_node,
+		       unsigned char *hna_buff, int hna_buff_len)
+{
+	if ((hna_buff_len != orig_node->hna_buff_len) ||
+	    ((hna_buff_len > 0) &&
+	     (orig_node->hna_buff_len > 0) &&
+	     (memcmp(orig_node->hna_buff, hna_buff, hna_buff_len) != 0))) {
+
+		if (orig_node->hna_buff_len > 0)
+			hna_global_del_orig(bat_priv, orig_node,
+					    "originator changed hna");
+
+		if ((hna_buff_len > 0) && (hna_buff))
+			hna_global_add_orig(bat_priv, orig_node,
+					    hna_buff, hna_buff_len);
+	}
+}
+
+static void update_route(struct bat_priv *bat_priv,
+			 struct orig_node *orig_node,
+			 struct neigh_node *neigh_node,
+			 unsigned char *hna_buff, int hna_buff_len)
+{
+	/* route deleted */
+	if ((orig_node->router) && (!neigh_node)) {
+
+		bat_dbg(DBG_ROUTES, bat_priv, "Deleting route towards: %pM\n",
+			orig_node->orig);
+		hna_global_del_orig(bat_priv, orig_node,
+				    "originator timed out");
+
+		/* route added */
+	} else if ((!orig_node->router) && (neigh_node)) {
+
+		bat_dbg(DBG_ROUTES, bat_priv,
+			"Adding route towards: %pM (via %pM)\n",
+			orig_node->orig, neigh_node->addr);
+		hna_global_add_orig(bat_priv, orig_node,
+				    hna_buff, hna_buff_len);
+
+		/* route changed */
+	} else {
+		bat_dbg(DBG_ROUTES, bat_priv,
+			"Changing route towards: %pM "
+			"(now via %pM - was via %pM)\n",
+			orig_node->orig, neigh_node->addr,
+			orig_node->router->addr);
+	}
+
+	orig_node->router = neigh_node;
+}
+
+
+void update_routes(struct bat_priv *bat_priv, struct orig_node *orig_node,
+		   struct neigh_node *neigh_node, unsigned char *hna_buff,
+		   int hna_buff_len)
+{
+
+	if (!orig_node)
+		return;
+
+	if (orig_node->router != neigh_node)
+		update_route(bat_priv, orig_node, neigh_node,
+			     hna_buff, hna_buff_len);
+	/* may be just HNA changed */
+	else
+		update_HNA(bat_priv, orig_node, hna_buff, hna_buff_len);
+}
+
+static int is_bidirectional_neigh(struct orig_node *orig_node,
+				struct orig_node *orig_neigh_node,
+				struct batman_packet *batman_packet,
+				struct batman_if *if_incoming)
+{
+	struct bat_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
+	struct neigh_node *neigh_node = NULL, *tmp_neigh_node = NULL;
+	unsigned char total_count;
+
+	if (orig_node == orig_neigh_node) {
+		list_for_each_entry(tmp_neigh_node,
+				    &orig_node->neigh_list,
+				    list) {
+
+			if (compare_orig(tmp_neigh_node->addr,
+					 orig_neigh_node->orig) &&
+			    (tmp_neigh_node->if_incoming == if_incoming))
+				neigh_node = tmp_neigh_node;
+		}
+
+		if (!neigh_node)
+			neigh_node = create_neighbor(orig_node,
+						     orig_neigh_node,
+						     orig_neigh_node->orig,
+						     if_incoming);
+		/* create_neighbor failed, return 0 */
+		if (!neigh_node)
+			return 0;
+
+		neigh_node->last_valid = jiffies;
+	} else {
+		/* find packet count of corresponding one hop neighbor */
+		list_for_each_entry(tmp_neigh_node,
+				    &orig_neigh_node->neigh_list, list) {
+
+			if (compare_orig(tmp_neigh_node->addr,
+					 orig_neigh_node->orig) &&
+			    (tmp_neigh_node->if_incoming == if_incoming))
+				neigh_node = tmp_neigh_node;
+		}
+
+		if (!neigh_node)
+			neigh_node = create_neighbor(orig_neigh_node,
+						     orig_neigh_node,
+						     orig_neigh_node->orig,
+						     if_incoming);
+		/* create_neighbor failed, return 0 */
+		if (!neigh_node)
+			return 0;
+	}
+
+	orig_node->last_valid = jiffies;
+
+	/* pay attention to not get a value bigger than 100 % */
+	total_count = (orig_neigh_node->bcast_own_sum[if_incoming->if_num] >
+		       neigh_node->real_packet_count ?
+		       neigh_node->real_packet_count :
+		       orig_neigh_node->bcast_own_sum[if_incoming->if_num]);
+
+	/* if we have too few packets (too less data) we set tq_own to zero */
+	/* if we receive too few packets it is not considered bidirectional */
+	if ((total_count < TQ_LOCAL_BIDRECT_SEND_MINIMUM) ||
+	    (neigh_node->real_packet_count < TQ_LOCAL_BIDRECT_RECV_MINIMUM))
+		orig_neigh_node->tq_own = 0;
+	else
+		/* neigh_node->real_packet_count is never zero as we
+		 * only purge old information when getting new
+		 * information */
+		orig_neigh_node->tq_own = (TQ_MAX_VALUE * total_count) /
+			neigh_node->real_packet_count;
+
+	/*
+	 * 1 - ((1-x) ** 3), normalized to TQ_MAX_VALUE this does
+	 * affect the nearly-symmetric links only a little, but
+	 * punishes asymmetric links more.  This will give a value
+	 * between 0 and TQ_MAX_VALUE
+	 */
+	orig_neigh_node->tq_asym_penalty =
+		TQ_MAX_VALUE -
+		(TQ_MAX_VALUE *
+		 (TQ_LOCAL_WINDOW_SIZE - neigh_node->real_packet_count) *
+		 (TQ_LOCAL_WINDOW_SIZE - neigh_node->real_packet_count) *
+		 (TQ_LOCAL_WINDOW_SIZE - neigh_node->real_packet_count)) /
+		(TQ_LOCAL_WINDOW_SIZE *
+		 TQ_LOCAL_WINDOW_SIZE *
+		 TQ_LOCAL_WINDOW_SIZE);
+
+	batman_packet->tq = ((batman_packet->tq *
+			      orig_neigh_node->tq_own *
+			      orig_neigh_node->tq_asym_penalty) /
+			     (TQ_MAX_VALUE * TQ_MAX_VALUE));
+
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"bidirectional: "
+		"orig = %-15pM neigh = %-15pM => own_bcast = %2i, "
+		"real recv = %2i, local tq: %3i, asym_penalty: %3i, "
+		"total tq: %3i\n",
+		orig_node->orig, orig_neigh_node->orig, total_count,
+		neigh_node->real_packet_count, orig_neigh_node->tq_own,
+		orig_neigh_node->tq_asym_penalty, batman_packet->tq);
+
+	/* if link has the minimum required transmission quality
+	 * consider it bidirectional */
+	if (batman_packet->tq >= TQ_TOTAL_BIDRECT_LIMIT)
+		return 1;
+
+	return 0;
+}
+
+static void update_orig(struct bat_priv *bat_priv,
+			struct orig_node *orig_node,
+			struct ethhdr *ethhdr,
+			struct batman_packet *batman_packet,
+			struct batman_if *if_incoming,
+			unsigned char *hna_buff, int hna_buff_len,
+			char is_duplicate)
+{
+	struct neigh_node *neigh_node = NULL, *tmp_neigh_node = NULL;
+	int tmp_hna_buff_len;
+
+	bat_dbg(DBG_BATMAN, bat_priv, "update_originator(): "
+		"Searching and updating originator entry of received packet\n");
+
+	list_for_each_entry(tmp_neigh_node, &orig_node->neigh_list, list) {
+		if (compare_orig(tmp_neigh_node->addr, ethhdr->h_source) &&
+		    (tmp_neigh_node->if_incoming == if_incoming)) {
+			neigh_node = tmp_neigh_node;
+			continue;
+		}
+
+		if (is_duplicate)
+			continue;
+
+		ring_buffer_set(tmp_neigh_node->tq_recv,
+				&tmp_neigh_node->tq_index, 0);
+		tmp_neigh_node->tq_avg =
+			ring_buffer_avg(tmp_neigh_node->tq_recv);
+	}
+
+	if (!neigh_node) {
+		struct orig_node *orig_tmp;
+
+		orig_tmp = get_orig_node(bat_priv, ethhdr->h_source);
+		if (!orig_tmp)
+			return;
+
+		neigh_node = create_neighbor(orig_node, orig_tmp,
+					     ethhdr->h_source, if_incoming);
+		if (!neigh_node)
+			return;
+	} else
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Updating existing last-hop neighbor of originator\n");
+
+	orig_node->flags = batman_packet->flags;
+	neigh_node->last_valid = jiffies;
+
+	ring_buffer_set(neigh_node->tq_recv,
+			&neigh_node->tq_index,
+			batman_packet->tq);
+	neigh_node->tq_avg = ring_buffer_avg(neigh_node->tq_recv);
+
+	if (!is_duplicate) {
+		orig_node->last_ttl = batman_packet->ttl;
+		neigh_node->last_ttl = batman_packet->ttl;
+	}
+
+	tmp_hna_buff_len = (hna_buff_len > batman_packet->num_hna * ETH_ALEN ?
+			    batman_packet->num_hna * ETH_ALEN : hna_buff_len);
+
+	/* if this neighbor already is our next hop there is nothing
+	 * to change */
+	if (orig_node->router == neigh_node)
+		goto update_hna;
+
+	/* if this neighbor does not offer a better TQ we won't consider it */
+	if ((orig_node->router) &&
+	    (orig_node->router->tq_avg > neigh_node->tq_avg))
+		goto update_hna;
+
+	/* if the TQ is the same and the link not more symetric we
+	 * won't consider it either */
+	if ((orig_node->router) &&
+	     ((neigh_node->tq_avg == orig_node->router->tq_avg) &&
+	     (orig_node->router->orig_node->bcast_own_sum[if_incoming->if_num]
+	      >= neigh_node->orig_node->bcast_own_sum[if_incoming->if_num])))
+		goto update_hna;
+
+	update_routes(bat_priv, orig_node, neigh_node,
+		      hna_buff, tmp_hna_buff_len);
+	goto update_gw;
+
+update_hna:
+	update_routes(bat_priv, orig_node, orig_node->router,
+		      hna_buff, tmp_hna_buff_len);
+
+update_gw:
+	if (orig_node->gw_flags != batman_packet->gw_flags)
+		gw_node_update(bat_priv, orig_node, batman_packet->gw_flags);
+
+	orig_node->gw_flags = batman_packet->gw_flags;
+
+	/* restart gateway selection if fast or late switching was enabled */
+	if ((orig_node->gw_flags) &&
+	    (atomic_read(&bat_priv->gw_mode) == GW_MODE_CLIENT) &&
+	    (atomic_read(&bat_priv->gw_sel_class) > 2))
+		gw_check_election(bat_priv, orig_node);
+}
+
+/* checks whether the host restarted and is in the protection time.
+ * returns:
+ *  0 if the packet is to be accepted
+ *  1 if the packet is to be ignored.
+ */
+static int window_protected(struct bat_priv *bat_priv,
+			    int32_t seq_num_diff,
+			    unsigned long *last_reset)
+{
+	if ((seq_num_diff <= -TQ_LOCAL_WINDOW_SIZE)
+		|| (seq_num_diff >= EXPECTED_SEQNO_RANGE)) {
+		if (time_after(jiffies, *last_reset +
+			msecs_to_jiffies(RESET_PROTECTION_MS))) {
+
+			*last_reset = jiffies;
+			bat_dbg(DBG_BATMAN, bat_priv,
+				"old packet received, start protection\n");
+
+			return 0;
+		} else
+			return 1;
+	}
+	return 0;
+}
+
+/* processes a batman packet for all interfaces, adjusts the sequence number and
+ * finds out whether it is a duplicate.
+ * returns:
+ *   1 the packet is a duplicate
+ *   0 the packet has not yet been received
+ *  -1 the packet is old and has been received while the seqno window
+ *     was protected. Caller should drop it.
+ */
+static char count_real_packets(struct ethhdr *ethhdr,
+			       struct batman_packet *batman_packet,
+			       struct batman_if *if_incoming)
+{
+	struct bat_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
+	struct orig_node *orig_node;
+	struct neigh_node *tmp_neigh_node;
+	char is_duplicate = 0;
+	int32_t seq_diff;
+	int need_update = 0;
+	int set_mark;
+
+	orig_node = get_orig_node(bat_priv, batman_packet->orig);
+	if (!orig_node)
+		return 0;
+
+	seq_diff = batman_packet->seqno - orig_node->last_real_seqno;
+
+	/* signalize caller that the packet is to be dropped. */
+	if (window_protected(bat_priv, seq_diff,
+			     &orig_node->batman_seqno_reset))
+		return -1;
+
+	list_for_each_entry(tmp_neigh_node, &orig_node->neigh_list, list) {
+
+		is_duplicate |= get_bit_status(tmp_neigh_node->real_bits,
+					       orig_node->last_real_seqno,
+					       batman_packet->seqno);
+
+		if (compare_orig(tmp_neigh_node->addr, ethhdr->h_source) &&
+		    (tmp_neigh_node->if_incoming == if_incoming))
+			set_mark = 1;
+		else
+			set_mark = 0;
+
+		/* if the window moved, set the update flag. */
+		need_update |= bit_get_packet(bat_priv,
+					      tmp_neigh_node->real_bits,
+					      seq_diff, set_mark);
+
+		tmp_neigh_node->real_packet_count =
+			bit_packet_count(tmp_neigh_node->real_bits);
+	}
+
+	if (need_update) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"updating last_seqno: old %d, new %d\n",
+			orig_node->last_real_seqno, batman_packet->seqno);
+		orig_node->last_real_seqno = batman_packet->seqno;
+	}
+
+	return is_duplicate;
+}
+
+/* copy primary address for bonding */
+static void mark_bonding_address(struct bat_priv *bat_priv,
+				 struct orig_node *orig_node,
+				 struct orig_node *orig_neigh_node,
+				 struct batman_packet *batman_packet)
+
+{
+	if (batman_packet->flags & PRIMARIES_FIRST_HOP)
+		memcpy(orig_neigh_node->primary_addr,
+		       orig_node->orig, ETH_ALEN);
+
+	return;
+}
+
+/* mark possible bond.candidates in the neighbor list */
+void update_bonding_candidates(struct bat_priv *bat_priv,
+			       struct orig_node *orig_node)
+{
+	int candidates;
+	int interference_candidate;
+	int best_tq;
+	struct neigh_node *tmp_neigh_node, *tmp_neigh_node2;
+	struct neigh_node *first_candidate, *last_candidate;
+
+	/* update the candidates for this originator */
+	if (!orig_node->router) {
+		orig_node->bond.candidates = 0;
+		return;
+	}
+
+	best_tq = orig_node->router->tq_avg;
+
+	/* update bond.candidates */
+
+	candidates = 0;
+
+	/* mark other nodes which also received "PRIMARIES FIRST HOP" packets
+	 * as "bonding partner" */
+
+	/* first, zero the list */
+	list_for_each_entry(tmp_neigh_node, &orig_node->neigh_list, list) {
+		tmp_neigh_node->next_bond_candidate = NULL;
+	}
+
+	first_candidate = NULL;
+	last_candidate = NULL;
+	list_for_each_entry(tmp_neigh_node, &orig_node->neigh_list, list) {
+
+		/* only consider if it has the same primary address ...  */
+		if (memcmp(orig_node->orig,
+				tmp_neigh_node->orig_node->primary_addr,
+				ETH_ALEN) != 0)
+			continue;
+
+		/* ... and is good enough to be considered */
+		if (tmp_neigh_node->tq_avg < best_tq - BONDING_TQ_THRESHOLD)
+			continue;
+
+		/* check if we have another candidate with the same
+		 * mac address or interface. If we do, we won't
+		 * select this candidate because of possible interference. */
+
+		interference_candidate = 0;
+		list_for_each_entry(tmp_neigh_node2,
+				&orig_node->neigh_list, list) {
+
+			if (tmp_neigh_node2 == tmp_neigh_node)
+				continue;
+
+			/* we only care if the other candidate is even
+			 * considered as candidate. */
+			if (!tmp_neigh_node2->next_bond_candidate)
+				continue;
+
+
+			if ((tmp_neigh_node->if_incoming ==
+				tmp_neigh_node2->if_incoming)
+				|| (memcmp(tmp_neigh_node->addr,
+				tmp_neigh_node2->addr, ETH_ALEN) == 0)) {
+
+				interference_candidate = 1;
+				break;
+			}
+		}
+		/* don't care further if it is an interference candidate */
+		if (interference_candidate)
+			continue;
+
+		if (!first_candidate) {
+			first_candidate = tmp_neigh_node;
+			tmp_neigh_node->next_bond_candidate = first_candidate;
+		} else
+			tmp_neigh_node->next_bond_candidate = last_candidate;
+
+		last_candidate = tmp_neigh_node;
+
+		candidates++;
+	}
+
+	if (candidates > 0) {
+		first_candidate->next_bond_candidate = last_candidate;
+		orig_node->bond.selected = first_candidate;
+	}
+
+	orig_node->bond.candidates = candidates;
+}
+
+void receive_bat_packet(struct ethhdr *ethhdr,
+				struct batman_packet *batman_packet,
+				unsigned char *hna_buff, int hna_buff_len,
+				struct batman_if *if_incoming)
+{
+	struct bat_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
+	struct batman_if *batman_if;
+	struct orig_node *orig_neigh_node, *orig_node;
+	char has_directlink_flag;
+	char is_my_addr = 0, is_my_orig = 0, is_my_oldorig = 0;
+	char is_broadcast = 0, is_bidirectional, is_single_hop_neigh;
+	char is_duplicate;
+	uint32_t if_incoming_seqno;
+
+	/* Silently drop when the batman packet is actually not a
+	 * correct packet.
+	 *
+	 * This might happen if a packet is padded (e.g. Ethernet has a
+	 * minimum frame length of 64 byte) and the aggregation interprets
+	 * it as an additional length.
+	 *
+	 * TODO: A more sane solution would be to have a bit in the
+	 * batman_packet to detect whether the packet is the last
+	 * packet in an aggregation.  Here we expect that the padding
+	 * is always zero (or not 0x01)
+	 */
+	if (batman_packet->packet_type != BAT_PACKET)
+		return;
+
+	/* could be changed by schedule_own_packet() */
+	if_incoming_seqno = atomic_read(&if_incoming->seqno);
+
+	has_directlink_flag = (batman_packet->flags & DIRECTLINK ? 1 : 0);
+
+	is_single_hop_neigh = (compare_orig(ethhdr->h_source,
+					    batman_packet->orig) ? 1 : 0);
+
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Received BATMAN packet via NB: %pM, IF: %s [%pM] "
+		"(from OG: %pM, via prev OG: %pM, seqno %d, tq %d, "
+		"TTL %d, V %d, IDF %d)\n",
+		ethhdr->h_source, if_incoming->net_dev->name,
+		if_incoming->net_dev->dev_addr, batman_packet->orig,
+		batman_packet->prev_sender, batman_packet->seqno,
+		batman_packet->tq, batman_packet->ttl, batman_packet->version,
+		has_directlink_flag);
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(batman_if, &if_list, list) {
+		if (batman_if->if_status != IF_ACTIVE)
+			continue;
+
+		if (batman_if->soft_iface != if_incoming->soft_iface)
+			continue;
+
+		if (compare_orig(ethhdr->h_source,
+				 batman_if->net_dev->dev_addr))
+			is_my_addr = 1;
+
+		if (compare_orig(batman_packet->orig,
+				 batman_if->net_dev->dev_addr))
+			is_my_orig = 1;
+
+		if (compare_orig(batman_packet->prev_sender,
+				 batman_if->net_dev->dev_addr))
+			is_my_oldorig = 1;
+
+		if (compare_orig(ethhdr->h_source, broadcast_addr))
+			is_broadcast = 1;
+	}
+	rcu_read_unlock();
+
+	if (batman_packet->version != COMPAT_VERSION) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: incompatible batman version (%i)\n",
+			batman_packet->version);
+		return;
+	}
+
+	if (is_my_addr) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: received my own broadcast (sender: %pM"
+			")\n",
+			ethhdr->h_source);
+		return;
+	}
+
+	if (is_broadcast) {
+		bat_dbg(DBG_BATMAN, bat_priv, "Drop packet: "
+		"ignoring all packets with broadcast source addr (sender: %pM"
+		")\n", ethhdr->h_source);
+		return;
+	}
+
+	if (is_my_orig) {
+		unsigned long *word;
+		int offset;
+
+		orig_neigh_node = get_orig_node(bat_priv, ethhdr->h_source);
+
+		if (!orig_neigh_node)
+			return;
+
+		/* neighbor has to indicate direct link and it has to
+		 * come via the corresponding interface */
+		/* if received seqno equals last send seqno save new
+		 * seqno for bidirectional check */
+		if (has_directlink_flag &&
+		    compare_orig(if_incoming->net_dev->dev_addr,
+				 batman_packet->orig) &&
+		    (batman_packet->seqno - if_incoming_seqno + 2 == 0)) {
+			offset = if_incoming->if_num * NUM_WORDS;
+			word = &(orig_neigh_node->bcast_own[offset]);
+			bit_mark(word, 0);
+			orig_neigh_node->bcast_own_sum[if_incoming->if_num] =
+				bit_packet_count(word);
+		}
+
+		bat_dbg(DBG_BATMAN, bat_priv, "Drop packet: "
+			"originator packet from myself (via neighbor)\n");
+		return;
+	}
+
+	if (is_my_oldorig) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: ignoring all rebroadcast echos (sender: "
+			"%pM)\n", ethhdr->h_source);
+		return;
+	}
+
+	orig_node = get_orig_node(bat_priv, batman_packet->orig);
+	if (!orig_node)
+		return;
+
+	is_duplicate = count_real_packets(ethhdr, batman_packet, if_incoming);
+
+	if (is_duplicate == -1) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: packet within seqno protection time "
+			"(sender: %pM)\n", ethhdr->h_source);
+		return;
+	}
+
+	if (batman_packet->tq == 0) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: originator packet with tq equal 0\n");
+		return;
+	}
+
+	/* avoid temporary routing loops */
+	if ((orig_node->router) &&
+	    (orig_node->router->orig_node->router) &&
+	    (compare_orig(orig_node->router->addr,
+			  batman_packet->prev_sender)) &&
+	    !(compare_orig(batman_packet->orig, batman_packet->prev_sender)) &&
+	    (compare_orig(orig_node->router->addr,
+			  orig_node->router->orig_node->router->addr))) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: ignoring all rebroadcast packets that "
+			"may make me loop (sender: %pM)\n", ethhdr->h_source);
+		return;
+	}
+
+	/* if sender is a direct neighbor the sender mac equals
+	 * originator mac */
+	orig_neigh_node = (is_single_hop_neigh ?
+			   orig_node :
+			   get_orig_node(bat_priv, ethhdr->h_source));
+	if (!orig_neigh_node)
+		return;
+
+	/* drop packet if sender is not a direct neighbor and if we
+	 * don't route towards it */
+	if (!is_single_hop_neigh && (!orig_neigh_node->router)) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: OGM via unknown neighbor!\n");
+		return;
+	}
+
+	is_bidirectional = is_bidirectional_neigh(orig_node, orig_neigh_node,
+						batman_packet, if_incoming);
+
+	/* update ranking if it is not a duplicate or has the same
+	 * seqno and similar ttl as the non-duplicate */
+	if (is_bidirectional &&
+	    (!is_duplicate ||
+	     ((orig_node->last_real_seqno == batman_packet->seqno) &&
+	      (orig_node->last_ttl - 3 <= batman_packet->ttl))))
+		update_orig(bat_priv, orig_node, ethhdr, batman_packet,
+			    if_incoming, hna_buff, hna_buff_len, is_duplicate);
+
+	mark_bonding_address(bat_priv, orig_node,
+			     orig_neigh_node, batman_packet);
+	update_bonding_candidates(bat_priv, orig_node);
+
+	/* is single hop (direct) neighbor */
+	if (is_single_hop_neigh) {
+
+		/* mark direct link on incoming interface */
+		schedule_forward_packet(orig_node, ethhdr, batman_packet,
+					1, hna_buff_len, if_incoming);
+
+		bat_dbg(DBG_BATMAN, bat_priv, "Forwarding packet: "
+			"rebroadcast neighbor packet with direct link flag\n");
+		return;
+	}
+
+	/* multihop originator */
+	if (!is_bidirectional) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: not received via bidirectional link\n");
+		return;
+	}
+
+	if (is_duplicate) {
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"Drop packet: duplicate packet received\n");
+		return;
+	}
+
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Forwarding packet: rebroadcast originator packet\n");
+	schedule_forward_packet(orig_node, ethhdr, batman_packet,
+				0, hna_buff_len, if_incoming);
+}
+
+int recv_bat_packet(struct sk_buff *skb, struct batman_if *batman_if)
+{
+	struct bat_priv *bat_priv = netdev_priv(batman_if->soft_iface);
+	struct ethhdr *ethhdr;
+
+	/* drop packet if it has not necessary minimum size */
+	if (unlikely(!pskb_may_pull(skb, sizeof(struct batman_packet))))
+		return NET_RX_DROP;
+
+	ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+	/* packet with broadcast indication but unicast recipient */
+	if (!is_broadcast_ether_addr(ethhdr->h_dest))
+		return NET_RX_DROP;
+
+	/* packet with broadcast sender address */
+	if (is_broadcast_ether_addr(ethhdr->h_source))
+		return NET_RX_DROP;
+
+	/* create a copy of the skb, if needed, to modify it. */
+	if (skb_cow(skb, 0) < 0)
+		return NET_RX_DROP;
+
+	/* keep skb linear */
+	if (skb_linearize(skb) < 0)
+		return NET_RX_DROP;
+
+	ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	receive_aggr_bat_packet(ethhdr,
+				skb->data,
+				skb_headlen(skb),
+				batman_if);
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	kfree_skb(skb);
+	return NET_RX_SUCCESS;
+}
+
+static int recv_my_icmp_packet(struct bat_priv *bat_priv,
+			       struct sk_buff *skb, size_t icmp_len)
+{
+	struct orig_node *orig_node;
+	struct icmp_packet_rr *icmp_packet;
+	struct ethhdr *ethhdr;
+	struct batman_if *batman_if;
+	int ret;
+	uint8_t dstaddr[ETH_ALEN];
+
+	icmp_packet = (struct icmp_packet_rr *)skb->data;
+	ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+	/* add data to device queue */
+	if (icmp_packet->msg_type != ECHO_REQUEST) {
+		bat_socket_receive_packet(icmp_packet, icmp_len);
+		return NET_RX_DROP;
+	}
+
+	if (!bat_priv->primary_if)
+		return NET_RX_DROP;
+
+	/* answer echo request (ping) */
+	/* get routing information */
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	orig_node = ((struct orig_node *)hash_find(bat_priv->orig_hash,
+						   compare_orig, choose_orig,
+						   icmp_packet->orig));
+	ret = NET_RX_DROP;
+
+	if ((orig_node) && (orig_node->router)) {
+
+		/* don't lock while sending the packets ... we therefore
+		 * copy the required data before sending */
+		batman_if = orig_node->router->if_incoming;
+		memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
+		spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+		/* create a copy of the skb, if needed, to modify it. */
+		if (skb_cow(skb, sizeof(struct ethhdr)) < 0)
+			return NET_RX_DROP;
+
+		icmp_packet = (struct icmp_packet_rr *)skb->data;
+		ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+		memcpy(icmp_packet->dst, icmp_packet->orig, ETH_ALEN);
+		memcpy(icmp_packet->orig,
+		       bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+		icmp_packet->msg_type = ECHO_REPLY;
+		icmp_packet->ttl = TTL;
+
+		send_skb_packet(skb, batman_if, dstaddr);
+		ret = NET_RX_SUCCESS;
+
+	} else
+		spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	return ret;
+}
+
+static int recv_icmp_ttl_exceeded(struct bat_priv *bat_priv,
+				  struct sk_buff *skb, size_t icmp_len)
+{
+	struct orig_node *orig_node;
+	struct icmp_packet *icmp_packet;
+	struct ethhdr *ethhdr;
+	struct batman_if *batman_if;
+	int ret;
+	uint8_t dstaddr[ETH_ALEN];
+
+	icmp_packet = (struct icmp_packet *)skb->data;
+	ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+	/* send TTL exceeded if packet is an echo request (traceroute) */
+	if (icmp_packet->msg_type != ECHO_REQUEST) {
+		pr_debug("Warning - can't forward icmp packet from %pM to "
+			 "%pM: ttl exceeded\n", icmp_packet->orig,
+			 icmp_packet->dst);
+		return NET_RX_DROP;
+	}
+
+	if (!bat_priv->primary_if)
+		return NET_RX_DROP;
+
+	/* get routing information */
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	orig_node = ((struct orig_node *)
+		     hash_find(bat_priv->orig_hash, compare_orig, choose_orig,
+			       icmp_packet->orig));
+	ret = NET_RX_DROP;
+
+	if ((orig_node) && (orig_node->router)) {
+
+		/* don't lock while sending the packets ... we therefore
+		 * copy the required data before sending */
+		batman_if = orig_node->router->if_incoming;
+		memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
+		spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+		/* create a copy of the skb, if needed, to modify it. */
+		if (skb_cow(skb, sizeof(struct ethhdr)) < 0)
+			return NET_RX_DROP;
+
+		icmp_packet = (struct icmp_packet *) skb->data;
+		ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+		memcpy(icmp_packet->dst, icmp_packet->orig, ETH_ALEN);
+		memcpy(icmp_packet->orig,
+		       bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+		icmp_packet->msg_type = TTL_EXCEEDED;
+		icmp_packet->ttl = TTL;
+
+		send_skb_packet(skb, batman_if, dstaddr);
+		ret = NET_RX_SUCCESS;
+
+	} else
+		spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	return ret;
+}
+
+
+int recv_icmp_packet(struct sk_buff *skb, struct batman_if *recv_if)
+{
+	struct bat_priv *bat_priv = netdev_priv(recv_if->soft_iface);
+	struct icmp_packet_rr *icmp_packet;
+	struct ethhdr *ethhdr;
+	struct orig_node *orig_node;
+	struct batman_if *batman_if;
+	int hdr_size = sizeof(struct icmp_packet);
+	int ret;
+	uint8_t dstaddr[ETH_ALEN];
+
+	/**
+	 * we truncate all incoming icmp packets if they don't match our size
+	 */
+	if (skb->len >= sizeof(struct icmp_packet_rr))
+		hdr_size = sizeof(struct icmp_packet_rr);
+
+	/* drop packet if it has not necessary minimum size */
+	if (unlikely(!pskb_may_pull(skb, hdr_size)))
+		return NET_RX_DROP;
+
+	ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+	/* packet with unicast indication but broadcast recipient */
+	if (is_broadcast_ether_addr(ethhdr->h_dest))
+		return NET_RX_DROP;
+
+	/* packet with broadcast sender address */
+	if (is_broadcast_ether_addr(ethhdr->h_source))
+		return NET_RX_DROP;
+
+	/* not for me */
+	if (!is_my_mac(ethhdr->h_dest))
+		return NET_RX_DROP;
+
+	icmp_packet = (struct icmp_packet_rr *)skb->data;
+
+	/* add record route information if not full */
+	if ((hdr_size == sizeof(struct icmp_packet_rr)) &&
+	    (icmp_packet->rr_cur < BAT_RR_LEN)) {
+		memcpy(&(icmp_packet->rr[icmp_packet->rr_cur]),
+			ethhdr->h_dest, ETH_ALEN);
+		icmp_packet->rr_cur++;
+	}
+
+	/* packet for me */
+	if (is_my_mac(icmp_packet->dst))
+		return recv_my_icmp_packet(bat_priv, skb, hdr_size);
+
+	/* TTL exceeded */
+	if (icmp_packet->ttl < 2)
+		return recv_icmp_ttl_exceeded(bat_priv, skb, hdr_size);
+
+	ret = NET_RX_DROP;
+
+	/* get routing information */
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	orig_node = ((struct orig_node *)
+		     hash_find(bat_priv->orig_hash, compare_orig, choose_orig,
+			       icmp_packet->dst));
+
+	if ((orig_node) && (orig_node->router)) {
+
+		/* don't lock while sending the packets ... we therefore
+		 * copy the required data before sending */
+		batman_if = orig_node->router->if_incoming;
+		memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
+		spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+		/* create a copy of the skb, if needed, to modify it. */
+		if (skb_cow(skb, sizeof(struct ethhdr)) < 0)
+			return NET_RX_DROP;
+
+		icmp_packet = (struct icmp_packet_rr *)skb->data;
+		ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+		/* decrement ttl */
+		icmp_packet->ttl--;
+
+		/* route it */
+		send_skb_packet(skb, batman_if, dstaddr);
+		ret = NET_RX_SUCCESS;
+
+	} else
+		spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	return ret;
+}
+
+/* find a suitable router for this originator, and use
+ * bonding if possible. */
+struct neigh_node *find_router(struct bat_priv *bat_priv,
+			       struct orig_node *orig_node,
+			       struct batman_if *recv_if)
+{
+	struct orig_node *primary_orig_node;
+	struct orig_node *router_orig;
+	struct neigh_node *router, *first_candidate, *best_router;
+	static uint8_t zero_mac[ETH_ALEN] = {0, 0, 0, 0, 0, 0};
+	int bonding_enabled;
+
+	if (!orig_node)
+		return NULL;
+
+	if (!orig_node->router)
+		return NULL;
+
+	/* without bonding, the first node should
+	 * always choose the default router. */
+
+	bonding_enabled = atomic_read(&bat_priv->bonding);
+
+	if ((!recv_if) && (!bonding_enabled))
+		return orig_node->router;
+
+	router_orig = orig_node->router->orig_node;
+
+	/* if we have something in the primary_addr, we can search
+	 * for a potential bonding candidate. */
+	if (memcmp(router_orig->primary_addr, zero_mac, ETH_ALEN) == 0)
+		return orig_node->router;
+
+	/* find the orig_node which has the primary interface. might
+	 * even be the same as our router_orig in many cases */
+
+	if (memcmp(router_orig->primary_addr,
+				router_orig->orig, ETH_ALEN) == 0) {
+		primary_orig_node = router_orig;
+	} else {
+		primary_orig_node = hash_find(bat_priv->orig_hash, compare_orig,
+					       choose_orig,
+					       router_orig->primary_addr);
+
+		if (!primary_orig_node)
+			return orig_node->router;
+	}
+
+	/* with less than 2 candidates, we can't do any
+	 * bonding and prefer the original router. */
+
+	if (primary_orig_node->bond.candidates < 2)
+		return orig_node->router;
+
+
+	/* all nodes between should choose a candidate which
+	 * is is not on the interface where the packet came
+	 * in. */
+	first_candidate = primary_orig_node->bond.selected;
+	router = first_candidate;
+
+	if (bonding_enabled) {
+		/* in the bonding case, send the packets in a round
+		 * robin fashion over the remaining interfaces. */
+		do {
+			/* recv_if == NULL on the first node. */
+			if (router->if_incoming != recv_if)
+				break;
+
+			router = router->next_bond_candidate;
+		} while (router != first_candidate);
+
+		primary_orig_node->bond.selected = router->next_bond_candidate;
+
+	} else {
+		/* if bonding is disabled, use the best of the
+		 * remaining candidates which are not using
+		 * this interface. */
+		best_router = first_candidate;
+
+		do {
+			/* recv_if == NULL on the first node. */
+			if ((router->if_incoming != recv_if) &&
+				(router->tq_avg > best_router->tq_avg))
+					best_router = router;
+
+			router = router->next_bond_candidate;
+		} while (router != first_candidate);
+
+		router = best_router;
+	}
+
+	return router;
+}
+
+static int check_unicast_packet(struct sk_buff *skb, int hdr_size)
+{
+	struct ethhdr *ethhdr;
+
+	/* drop packet if it has not necessary minimum size */
+	if (unlikely(!pskb_may_pull(skb, hdr_size)))
+		return -1;
+
+	ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+	/* packet with unicast indication but broadcast recipient */
+	if (is_broadcast_ether_addr(ethhdr->h_dest))
+		return -1;
+
+	/* packet with broadcast sender address */
+	if (is_broadcast_ether_addr(ethhdr->h_source))
+		return -1;
+
+	/* not for me */
+	if (!is_my_mac(ethhdr->h_dest))
+		return -1;
+
+	return 0;
+}
+
+int route_unicast_packet(struct sk_buff *skb, struct batman_if *recv_if,
+			 int hdr_size)
+{
+	struct bat_priv *bat_priv = netdev_priv(recv_if->soft_iface);
+	struct orig_node *orig_node;
+	struct neigh_node *router;
+	struct batman_if *batman_if;
+	uint8_t dstaddr[ETH_ALEN];
+	struct unicast_packet *unicast_packet;
+	struct ethhdr *ethhdr = (struct ethhdr *)skb_mac_header(skb);
+	int ret;
+	struct sk_buff *new_skb;
+
+	unicast_packet = (struct unicast_packet *)skb->data;
+
+	/* TTL exceeded */
+	if (unicast_packet->ttl < 2) {
+		pr_debug("Warning - can't forward unicast packet from %pM to "
+			 "%pM: ttl exceeded\n", ethhdr->h_source,
+			 unicast_packet->dest);
+		return NET_RX_DROP;
+	}
+
+	/* get routing information */
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	orig_node = ((struct orig_node *)
+		     hash_find(bat_priv->orig_hash, compare_orig, choose_orig,
+			       unicast_packet->dest));
+
+	router = find_router(bat_priv, orig_node, recv_if);
+
+	if (!router) {
+		spin_unlock_bh(&bat_priv->orig_hash_lock);
+		return NET_RX_DROP;
+	}
+
+	/* don't lock while sending the packets ... we therefore
+	 * copy the required data before sending */
+
+	batman_if = router->if_incoming;
+	memcpy(dstaddr, router->addr, ETH_ALEN);
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	/* create a copy of the skb, if needed, to modify it. */
+	if (skb_cow(skb, sizeof(struct ethhdr)) < 0)
+		return NET_RX_DROP;
+
+	unicast_packet = (struct unicast_packet *)skb->data;
+
+	if (unicast_packet->packet_type == BAT_UNICAST &&
+	    atomic_read(&bat_priv->fragmentation) &&
+	    skb->len > batman_if->net_dev->mtu)
+		return frag_send_skb(skb, bat_priv, batman_if,
+				     dstaddr);
+
+	if (unicast_packet->packet_type == BAT_UNICAST_FRAG &&
+	    2 * skb->len - hdr_size <= batman_if->net_dev->mtu) {
+
+		ret = frag_reassemble_skb(skb, bat_priv, &new_skb);
+
+		if (ret == NET_RX_DROP)
+			return NET_RX_DROP;
+
+		/* packet was buffered for late merge */
+		if (!new_skb)
+			return NET_RX_SUCCESS;
+
+		skb = new_skb;
+		unicast_packet = (struct unicast_packet *)skb->data;
+	}
+
+	/* decrement ttl */
+	unicast_packet->ttl--;
+
+	/* route it */
+	send_skb_packet(skb, batman_if, dstaddr);
+
+	return NET_RX_SUCCESS;
+}
+
+int recv_unicast_packet(struct sk_buff *skb, struct batman_if *recv_if)
+{
+	struct unicast_packet *unicast_packet;
+	int hdr_size = sizeof(struct unicast_packet);
+
+	if (check_unicast_packet(skb, hdr_size) < 0)
+		return NET_RX_DROP;
+
+	unicast_packet = (struct unicast_packet *)skb->data;
+
+	/* packet for me */
+	if (is_my_mac(unicast_packet->dest)) {
+		interface_rx(recv_if->soft_iface, skb, recv_if, hdr_size);
+		return NET_RX_SUCCESS;
+	}
+
+	return route_unicast_packet(skb, recv_if, hdr_size);
+}
+
+int recv_ucast_frag_packet(struct sk_buff *skb, struct batman_if *recv_if)
+{
+	struct bat_priv *bat_priv = netdev_priv(recv_if->soft_iface);
+	struct unicast_frag_packet *unicast_packet;
+	int hdr_size = sizeof(struct unicast_frag_packet);
+	struct sk_buff *new_skb = NULL;
+	int ret;
+
+	if (check_unicast_packet(skb, hdr_size) < 0)
+		return NET_RX_DROP;
+
+	unicast_packet = (struct unicast_frag_packet *)skb->data;
+
+	/* packet for me */
+	if (is_my_mac(unicast_packet->dest)) {
+
+		ret = frag_reassemble_skb(skb, bat_priv, &new_skb);
+
+		if (ret == NET_RX_DROP)
+			return NET_RX_DROP;
+
+		/* packet was buffered for late merge */
+		if (!new_skb)
+			return NET_RX_SUCCESS;
+
+		interface_rx(recv_if->soft_iface, new_skb, recv_if,
+			     sizeof(struct unicast_packet));
+		return NET_RX_SUCCESS;
+	}
+
+	return route_unicast_packet(skb, recv_if, hdr_size);
+}
+
+
+int recv_bcast_packet(struct sk_buff *skb, struct batman_if *recv_if)
+{
+	struct bat_priv *bat_priv = netdev_priv(recv_if->soft_iface);
+	struct orig_node *orig_node;
+	struct bcast_packet *bcast_packet;
+	struct ethhdr *ethhdr;
+	int hdr_size = sizeof(struct bcast_packet);
+	int32_t seq_diff;
+
+	/* drop packet if it has not necessary minimum size */
+	if (unlikely(!pskb_may_pull(skb, hdr_size)))
+		return NET_RX_DROP;
+
+	ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+	/* packet with broadcast indication but unicast recipient */
+	if (!is_broadcast_ether_addr(ethhdr->h_dest))
+		return NET_RX_DROP;
+
+	/* packet with broadcast sender address */
+	if (is_broadcast_ether_addr(ethhdr->h_source))
+		return NET_RX_DROP;
+
+	/* ignore broadcasts sent by myself */
+	if (is_my_mac(ethhdr->h_source))
+		return NET_RX_DROP;
+
+	bcast_packet = (struct bcast_packet *)skb->data;
+
+	/* ignore broadcasts originated by myself */
+	if (is_my_mac(bcast_packet->orig))
+		return NET_RX_DROP;
+
+	if (bcast_packet->ttl < 2)
+		return NET_RX_DROP;
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	orig_node = ((struct orig_node *)
+		     hash_find(bat_priv->orig_hash, compare_orig, choose_orig,
+			       bcast_packet->orig));
+
+	if (!orig_node) {
+		spin_unlock_bh(&bat_priv->orig_hash_lock);
+		return NET_RX_DROP;
+	}
+
+	/* check whether the packet is a duplicate */
+	if (get_bit_status(orig_node->bcast_bits,
+			   orig_node->last_bcast_seqno,
+			   ntohl(bcast_packet->seqno))) {
+		spin_unlock_bh(&bat_priv->orig_hash_lock);
+		return NET_RX_DROP;
+	}
+
+	seq_diff = ntohl(bcast_packet->seqno) - orig_node->last_bcast_seqno;
+
+	/* check whether the packet is old and the host just restarted. */
+	if (window_protected(bat_priv, seq_diff,
+			     &orig_node->bcast_seqno_reset)) {
+		spin_unlock_bh(&bat_priv->orig_hash_lock);
+		return NET_RX_DROP;
+	}
+
+	/* mark broadcast in flood history, update window position
+	 * if required. */
+	if (bit_get_packet(bat_priv, orig_node->bcast_bits, seq_diff, 1))
+		orig_node->last_bcast_seqno = ntohl(bcast_packet->seqno);
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+	/* rebroadcast packet */
+	add_bcast_packet_to_list(bat_priv, skb);
+
+	/* broadcast for me */
+	interface_rx(recv_if->soft_iface, skb, recv_if, hdr_size);
+
+	return NET_RX_SUCCESS;
+}
+
+int recv_vis_packet(struct sk_buff *skb, struct batman_if *recv_if)
+{
+	struct vis_packet *vis_packet;
+	struct ethhdr *ethhdr;
+	struct bat_priv *bat_priv = netdev_priv(recv_if->soft_iface);
+	int hdr_size = sizeof(struct vis_packet);
+
+	/* keep skb linear */
+	if (skb_linearize(skb) < 0)
+		return NET_RX_DROP;
+
+	if (unlikely(!pskb_may_pull(skb, hdr_size)))
+		return NET_RX_DROP;
+
+	vis_packet = (struct vis_packet *)skb->data;
+	ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+	/* not for me */
+	if (!is_my_mac(ethhdr->h_dest))
+		return NET_RX_DROP;
+
+	/* ignore own packets */
+	if (is_my_mac(vis_packet->vis_orig))
+		return NET_RX_DROP;
+
+	if (is_my_mac(vis_packet->sender_orig))
+		return NET_RX_DROP;
+
+	switch (vis_packet->vis_type) {
+	case VIS_TYPE_SERVER_SYNC:
+		receive_server_sync_packet(bat_priv, vis_packet,
+					   skb_headlen(skb));
+		break;
+
+	case VIS_TYPE_CLIENT_UPDATE:
+		receive_client_update_packet(bat_priv, vis_packet,
+					     skb_headlen(skb));
+		break;
+
+	default:	/* ignore unknown packet */
+		break;
+	}
+
+	/* We take a copy of the data in the packet, so we should
+	   always free the skbuf. */
+	return NET_RX_DROP;
+}
diff --git a/net/batman-adv/routing.h b/net/batman-adv/routing.h
new file mode 100644
index 00000000000..f108f230bfd
--- /dev/null
+++ b/net/batman-adv/routing.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_ROUTING_H_
+#define _NET_BATMAN_ADV_ROUTING_H_
+
+#include "types.h"
+
+void slide_own_bcast_window(struct batman_if *batman_if);
+void receive_bat_packet(struct ethhdr *ethhdr,
+				struct batman_packet *batman_packet,
+				unsigned char *hna_buff, int hna_buff_len,
+				struct batman_if *if_incoming);
+void update_routes(struct bat_priv *bat_priv, struct orig_node *orig_node,
+		   struct neigh_node *neigh_node, unsigned char *hna_buff,
+		   int hna_buff_len);
+int route_unicast_packet(struct sk_buff *skb, struct batman_if *recv_if,
+			 int hdr_size);
+int recv_icmp_packet(struct sk_buff *skb, struct batman_if *recv_if);
+int recv_unicast_packet(struct sk_buff *skb, struct batman_if *recv_if);
+int recv_ucast_frag_packet(struct sk_buff *skb, struct batman_if *recv_if);
+int recv_bcast_packet(struct sk_buff *skb, struct batman_if *recv_if);
+int recv_vis_packet(struct sk_buff *skb, struct batman_if *recv_if);
+int recv_bat_packet(struct sk_buff *skb, struct batman_if *recv_if);
+struct neigh_node *find_router(struct bat_priv *bat_priv,
+		struct orig_node *orig_node, struct batman_if *recv_if);
+void update_bonding_candidates(struct bat_priv *bat_priv,
+			       struct orig_node *orig_node);
+
+#endif /* _NET_BATMAN_ADV_ROUTING_H_ */
diff --git a/net/batman-adv/send.c b/net/batman-adv/send.c
new file mode 100644
index 00000000000..b89b9f7709a
--- /dev/null
+++ b/net/batman-adv/send.c
@@ -0,0 +1,585 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "send.h"
+#include "routing.h"
+#include "translation-table.h"
+#include "soft-interface.h"
+#include "hard-interface.h"
+#include "types.h"
+#include "vis.h"
+#include "aggregation.h"
+#include "gateway_common.h"
+#include "originator.h"
+
+static void send_outstanding_bcast_packet(struct work_struct *work);
+
+/* apply hop penalty for a normal link */
+static uint8_t hop_penalty(const uint8_t tq, struct bat_priv *bat_priv)
+{
+	int hop_penalty = atomic_read(&bat_priv->hop_penalty);
+	return (tq * (TQ_MAX_VALUE - hop_penalty)) / (TQ_MAX_VALUE);
+}
+
+/* when do we schedule our own packet to be sent */
+static unsigned long own_send_time(struct bat_priv *bat_priv)
+{
+	return jiffies + msecs_to_jiffies(
+		   atomic_read(&bat_priv->orig_interval) -
+		   JITTER + (random32() % 2*JITTER));
+}
+
+/* when do we schedule a forwarded packet to be sent */
+static unsigned long forward_send_time(struct bat_priv *bat_priv)
+{
+	return jiffies + msecs_to_jiffies(random32() % (JITTER/2));
+}
+
+/* send out an already prepared packet to the given address via the
+ * specified batman interface */
+int send_skb_packet(struct sk_buff *skb,
+				struct batman_if *batman_if,
+				uint8_t *dst_addr)
+{
+	struct ethhdr *ethhdr;
+
+	if (batman_if->if_status != IF_ACTIVE)
+		goto send_skb_err;
+
+	if (unlikely(!batman_if->net_dev))
+		goto send_skb_err;
+
+	if (!(batman_if->net_dev->flags & IFF_UP)) {
+		pr_warning("Interface %s is not up - can't send packet via "
+			   "that interface!\n", batman_if->net_dev->name);
+		goto send_skb_err;
+	}
+
+	/* push to the ethernet header. */
+	if (my_skb_head_push(skb, sizeof(struct ethhdr)) < 0)
+		goto send_skb_err;
+
+	skb_reset_mac_header(skb);
+
+	ethhdr = (struct ethhdr *) skb_mac_header(skb);
+	memcpy(ethhdr->h_source, batman_if->net_dev->dev_addr, ETH_ALEN);
+	memcpy(ethhdr->h_dest, dst_addr, ETH_ALEN);
+	ethhdr->h_proto = __constant_htons(ETH_P_BATMAN);
+
+	skb_set_network_header(skb, ETH_HLEN);
+	skb->priority = TC_PRIO_CONTROL;
+	skb->protocol = __constant_htons(ETH_P_BATMAN);
+
+	skb->dev = batman_if->net_dev;
+
+	/* dev_queue_xmit() returns a negative result on error.	 However on
+	 * congestion and traffic shaping, it drops and returns NET_XMIT_DROP
+	 * (which is > 0). This will not be treated as an error. */
+
+	return dev_queue_xmit(skb);
+send_skb_err:
+	kfree_skb(skb);
+	return NET_XMIT_DROP;
+}
+
+/* Send a packet to a given interface */
+static void send_packet_to_if(struct forw_packet *forw_packet,
+			      struct batman_if *batman_if)
+{
+	struct bat_priv *bat_priv = netdev_priv(batman_if->soft_iface);
+	char *fwd_str;
+	uint8_t packet_num;
+	int16_t buff_pos;
+	struct batman_packet *batman_packet;
+	struct sk_buff *skb;
+
+	if (batman_if->if_status != IF_ACTIVE)
+		return;
+
+	packet_num = 0;
+	buff_pos = 0;
+	batman_packet = (struct batman_packet *)forw_packet->skb->data;
+
+	/* adjust all flags and log packets */
+	while (aggregated_packet(buff_pos,
+				 forw_packet->packet_len,
+				 batman_packet->num_hna)) {
+
+		/* we might have aggregated direct link packets with an
+		 * ordinary base packet */
+		if ((forw_packet->direct_link_flags & (1 << packet_num)) &&
+		    (forw_packet->if_incoming == batman_if))
+			batman_packet->flags |= DIRECTLINK;
+		else
+			batman_packet->flags &= ~DIRECTLINK;
+
+		fwd_str = (packet_num > 0 ? "Forwarding" : (forw_packet->own ?
+							    "Sending own" :
+							    "Forwarding"));
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"%s %spacket (originator %pM, seqno %d, TQ %d, TTL %d,"
+			" IDF %s) on interface %s [%pM]\n",
+			fwd_str, (packet_num > 0 ? "aggregated " : ""),
+			batman_packet->orig, ntohl(batman_packet->seqno),
+			batman_packet->tq, batman_packet->ttl,
+			(batman_packet->flags & DIRECTLINK ?
+			 "on" : "off"),
+			batman_if->net_dev->name, batman_if->net_dev->dev_addr);
+
+		buff_pos += sizeof(struct batman_packet) +
+			(batman_packet->num_hna * ETH_ALEN);
+		packet_num++;
+		batman_packet = (struct batman_packet *)
+			(forw_packet->skb->data + buff_pos);
+	}
+
+	/* create clone because function is called more than once */
+	skb = skb_clone(forw_packet->skb, GFP_ATOMIC);
+	if (skb)
+		send_skb_packet(skb, batman_if, broadcast_addr);
+}
+
+/* send a batman packet */
+static void send_packet(struct forw_packet *forw_packet)
+{
+	struct batman_if *batman_if;
+	struct net_device *soft_iface;
+	struct bat_priv *bat_priv;
+	struct batman_packet *batman_packet =
+		(struct batman_packet *)(forw_packet->skb->data);
+	unsigned char directlink = (batman_packet->flags & DIRECTLINK ? 1 : 0);
+
+	if (!forw_packet->if_incoming) {
+		pr_err("Error - can't forward packet: incoming iface not "
+		       "specified\n");
+		return;
+	}
+
+	soft_iface = forw_packet->if_incoming->soft_iface;
+	bat_priv = netdev_priv(soft_iface);
+
+	if (forw_packet->if_incoming->if_status != IF_ACTIVE)
+		return;
+
+	/* multihomed peer assumed */
+	/* non-primary OGMs are only broadcasted on their interface */
+	if ((directlink && (batman_packet->ttl == 1)) ||
+	    (forw_packet->own && (forw_packet->if_incoming->if_num > 0))) {
+
+		/* FIXME: what about aggregated packets ? */
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"%s packet (originator %pM, seqno %d, TTL %d) "
+			"on interface %s [%pM]\n",
+			(forw_packet->own ? "Sending own" : "Forwarding"),
+			batman_packet->orig, ntohl(batman_packet->seqno),
+			batman_packet->ttl,
+			forw_packet->if_incoming->net_dev->name,
+			forw_packet->if_incoming->net_dev->dev_addr);
+
+		/* skb is only used once and than forw_packet is free'd */
+		send_skb_packet(forw_packet->skb, forw_packet->if_incoming,
+				broadcast_addr);
+		forw_packet->skb = NULL;
+
+		return;
+	}
+
+	/* broadcast on every interface */
+	rcu_read_lock();
+	list_for_each_entry_rcu(batman_if, &if_list, list) {
+		if (batman_if->soft_iface != soft_iface)
+			continue;
+
+		send_packet_to_if(forw_packet, batman_if);
+	}
+	rcu_read_unlock();
+}
+
+static void rebuild_batman_packet(struct bat_priv *bat_priv,
+				  struct batman_if *batman_if)
+{
+	int new_len;
+	unsigned char *new_buff;
+	struct batman_packet *batman_packet;
+
+	new_len = sizeof(struct batman_packet) +
+			(bat_priv->num_local_hna * ETH_ALEN);
+	new_buff = kmalloc(new_len, GFP_ATOMIC);
+
+	/* keep old buffer if kmalloc should fail */
+	if (new_buff) {
+		memcpy(new_buff, batman_if->packet_buff,
+		       sizeof(struct batman_packet));
+		batman_packet = (struct batman_packet *)new_buff;
+
+		batman_packet->num_hna = hna_local_fill_buffer(bat_priv,
+				new_buff + sizeof(struct batman_packet),
+				new_len - sizeof(struct batman_packet));
+
+		kfree(batman_if->packet_buff);
+		batman_if->packet_buff = new_buff;
+		batman_if->packet_len = new_len;
+	}
+}
+
+void schedule_own_packet(struct batman_if *batman_if)
+{
+	struct bat_priv *bat_priv = netdev_priv(batman_if->soft_iface);
+	unsigned long send_time;
+	struct batman_packet *batman_packet;
+	int vis_server;
+
+	if ((batman_if->if_status == IF_NOT_IN_USE) ||
+	    (batman_if->if_status == IF_TO_BE_REMOVED))
+		return;
+
+	vis_server = atomic_read(&bat_priv->vis_mode);
+
+	/**
+	 * the interface gets activated here to avoid race conditions between
+	 * the moment of activating the interface in
+	 * hardif_activate_interface() where the originator mac is set and
+	 * outdated packets (especially uninitialized mac addresses) in the
+	 * packet queue
+	 */
+	if (batman_if->if_status == IF_TO_BE_ACTIVATED)
+		batman_if->if_status = IF_ACTIVE;
+
+	/* if local hna has changed and interface is a primary interface */
+	if ((atomic_read(&bat_priv->hna_local_changed)) &&
+	    (batman_if == bat_priv->primary_if))
+		rebuild_batman_packet(bat_priv, batman_if);
+
+	/**
+	 * NOTE: packet_buff might just have been re-allocated in
+	 * rebuild_batman_packet()
+	 */
+	batman_packet = (struct batman_packet *)batman_if->packet_buff;
+
+	/* change sequence number to network order */
+	batman_packet->seqno =
+		htonl((uint32_t)atomic_read(&batman_if->seqno));
+
+	if (vis_server == VIS_TYPE_SERVER_SYNC)
+		batman_packet->flags |= VIS_SERVER;
+	else
+		batman_packet->flags &= ~VIS_SERVER;
+
+	if ((batman_if == bat_priv->primary_if) &&
+	    (atomic_read(&bat_priv->gw_mode) == GW_MODE_SERVER))
+		batman_packet->gw_flags =
+				(uint8_t)atomic_read(&bat_priv->gw_bandwidth);
+	else
+		batman_packet->gw_flags = 0;
+
+	atomic_inc(&batman_if->seqno);
+
+	slide_own_bcast_window(batman_if);
+	send_time = own_send_time(bat_priv);
+	add_bat_packet_to_list(bat_priv,
+			       batman_if->packet_buff,
+			       batman_if->packet_len,
+			       batman_if, 1, send_time);
+}
+
+void schedule_forward_packet(struct orig_node *orig_node,
+			     struct ethhdr *ethhdr,
+			     struct batman_packet *batman_packet,
+			     uint8_t directlink, int hna_buff_len,
+			     struct batman_if *if_incoming)
+{
+	struct bat_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
+	unsigned char in_tq, in_ttl, tq_avg = 0;
+	unsigned long send_time;
+
+	if (batman_packet->ttl <= 1) {
+		bat_dbg(DBG_BATMAN, bat_priv, "ttl exceeded\n");
+		return;
+	}
+
+	in_tq = batman_packet->tq;
+	in_ttl = batman_packet->ttl;
+
+	batman_packet->ttl--;
+	memcpy(batman_packet->prev_sender, ethhdr->h_source, ETH_ALEN);
+
+	/* rebroadcast tq of our best ranking neighbor to ensure the rebroadcast
+	 * of our best tq value */
+	if ((orig_node->router) && (orig_node->router->tq_avg != 0)) {
+
+		/* rebroadcast ogm of best ranking neighbor as is */
+		if (!compare_orig(orig_node->router->addr, ethhdr->h_source)) {
+			batman_packet->tq = orig_node->router->tq_avg;
+
+			if (orig_node->router->last_ttl)
+				batman_packet->ttl = orig_node->router->last_ttl
+							- 1;
+		}
+
+		tq_avg = orig_node->router->tq_avg;
+	}
+
+	/* apply hop penalty */
+	batman_packet->tq = hop_penalty(batman_packet->tq, bat_priv);
+
+	bat_dbg(DBG_BATMAN, bat_priv,
+		"Forwarding packet: tq_orig: %i, tq_avg: %i, "
+		"tq_forw: %i, ttl_orig: %i, ttl_forw: %i\n",
+		in_tq, tq_avg, batman_packet->tq, in_ttl - 1,
+		batman_packet->ttl);
+
+	batman_packet->seqno = htonl(batman_packet->seqno);
+
+	/* switch of primaries first hop flag when forwarding */
+	batman_packet->flags &= ~PRIMARIES_FIRST_HOP;
+	if (directlink)
+		batman_packet->flags |= DIRECTLINK;
+	else
+		batman_packet->flags &= ~DIRECTLINK;
+
+	send_time = forward_send_time(bat_priv);
+	add_bat_packet_to_list(bat_priv,
+			       (unsigned char *)batman_packet,
+			       sizeof(struct batman_packet) + hna_buff_len,
+			       if_incoming, 0, send_time);
+}
+
+static void forw_packet_free(struct forw_packet *forw_packet)
+{
+	if (forw_packet->skb)
+		kfree_skb(forw_packet->skb);
+	kfree(forw_packet);
+}
+
+static void _add_bcast_packet_to_list(struct bat_priv *bat_priv,
+				      struct forw_packet *forw_packet,
+				      unsigned long send_time)
+{
+	INIT_HLIST_NODE(&forw_packet->list);
+
+	/* add new packet to packet list */
+	spin_lock_bh(&bat_priv->forw_bcast_list_lock);
+	hlist_add_head(&forw_packet->list, &bat_priv->forw_bcast_list);
+	spin_unlock_bh(&bat_priv->forw_bcast_list_lock);
+
+	/* start timer for this packet */
+	INIT_DELAYED_WORK(&forw_packet->delayed_work,
+			  send_outstanding_bcast_packet);
+	queue_delayed_work(bat_event_workqueue, &forw_packet->delayed_work,
+			   send_time);
+}
+
+#define atomic_dec_not_zero(v)          atomic_add_unless((v), -1, 0)
+/* add a broadcast packet to the queue and setup timers. broadcast packets
+ * are sent multiple times to increase probability for beeing received.
+ *
+ * This function returns NETDEV_TX_OK on success and NETDEV_TX_BUSY on
+ * errors.
+ *
+ * The skb is not consumed, so the caller should make sure that the
+ * skb is freed. */
+int add_bcast_packet_to_list(struct bat_priv *bat_priv, struct sk_buff *skb)
+{
+	struct forw_packet *forw_packet;
+	struct bcast_packet *bcast_packet;
+
+	if (!atomic_dec_not_zero(&bat_priv->bcast_queue_left)) {
+		bat_dbg(DBG_BATMAN, bat_priv, "bcast packet queue full\n");
+		goto out;
+	}
+
+	if (!bat_priv->primary_if)
+		goto out;
+
+	forw_packet = kmalloc(sizeof(struct forw_packet), GFP_ATOMIC);
+
+	if (!forw_packet)
+		goto out_and_inc;
+
+	skb = skb_copy(skb, GFP_ATOMIC);
+	if (!skb)
+		goto packet_free;
+
+	/* as we have a copy now, it is safe to decrease the TTL */
+	bcast_packet = (struct bcast_packet *)skb->data;
+	bcast_packet->ttl--;
+
+	skb_reset_mac_header(skb);
+
+	forw_packet->skb = skb;
+	forw_packet->if_incoming = bat_priv->primary_if;
+
+	/* how often did we send the bcast packet ? */
+	forw_packet->num_packets = 0;
+
+	_add_bcast_packet_to_list(bat_priv, forw_packet, 1);
+	return NETDEV_TX_OK;
+
+packet_free:
+	kfree(forw_packet);
+out_and_inc:
+	atomic_inc(&bat_priv->bcast_queue_left);
+out:
+	return NETDEV_TX_BUSY;
+}
+
+static void send_outstanding_bcast_packet(struct work_struct *work)
+{
+	struct batman_if *batman_if;
+	struct delayed_work *delayed_work =
+		container_of(work, struct delayed_work, work);
+	struct forw_packet *forw_packet =
+		container_of(delayed_work, struct forw_packet, delayed_work);
+	struct sk_buff *skb1;
+	struct net_device *soft_iface = forw_packet->if_incoming->soft_iface;
+	struct bat_priv *bat_priv = netdev_priv(soft_iface);
+
+	spin_lock_bh(&bat_priv->forw_bcast_list_lock);
+	hlist_del(&forw_packet->list);
+	spin_unlock_bh(&bat_priv->forw_bcast_list_lock);
+
+	if (atomic_read(&bat_priv->mesh_state) == MESH_DEACTIVATING)
+		goto out;
+
+	/* rebroadcast packet */
+	rcu_read_lock();
+	list_for_each_entry_rcu(batman_if, &if_list, list) {
+		if (batman_if->soft_iface != soft_iface)
+			continue;
+
+		/* send a copy of the saved skb */
+		skb1 = skb_clone(forw_packet->skb, GFP_ATOMIC);
+		if (skb1)
+			send_skb_packet(skb1, batman_if, broadcast_addr);
+	}
+	rcu_read_unlock();
+
+	forw_packet->num_packets++;
+
+	/* if we still have some more bcasts to send */
+	if (forw_packet->num_packets < 3) {
+		_add_bcast_packet_to_list(bat_priv, forw_packet,
+					  ((5 * HZ) / 1000));
+		return;
+	}
+
+out:
+	forw_packet_free(forw_packet);
+	atomic_inc(&bat_priv->bcast_queue_left);
+}
+
+void send_outstanding_bat_packet(struct work_struct *work)
+{
+	struct delayed_work *delayed_work =
+		container_of(work, struct delayed_work, work);
+	struct forw_packet *forw_packet =
+		container_of(delayed_work, struct forw_packet, delayed_work);
+	struct bat_priv *bat_priv;
+
+	bat_priv = netdev_priv(forw_packet->if_incoming->soft_iface);
+	spin_lock_bh(&bat_priv->forw_bat_list_lock);
+	hlist_del(&forw_packet->list);
+	spin_unlock_bh(&bat_priv->forw_bat_list_lock);
+
+	if (atomic_read(&bat_priv->mesh_state) == MESH_DEACTIVATING)
+		goto out;
+
+	send_packet(forw_packet);
+
+	/**
+	 * we have to have at least one packet in the queue
+	 * to determine the queues wake up time unless we are
+	 * shutting down
+	 */
+	if (forw_packet->own)
+		schedule_own_packet(forw_packet->if_incoming);
+
+out:
+	/* don't count own packet */
+	if (!forw_packet->own)
+		atomic_inc(&bat_priv->batman_queue_left);
+
+	forw_packet_free(forw_packet);
+}
+
+void purge_outstanding_packets(struct bat_priv *bat_priv,
+			       struct batman_if *batman_if)
+{
+	struct forw_packet *forw_packet;
+	struct hlist_node *tmp_node, *safe_tmp_node;
+
+	if (batman_if)
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"purge_outstanding_packets(): %s\n",
+			batman_if->net_dev->name);
+	else
+		bat_dbg(DBG_BATMAN, bat_priv,
+			"purge_outstanding_packets()\n");
+
+	/* free bcast list */
+	spin_lock_bh(&bat_priv->forw_bcast_list_lock);
+	hlist_for_each_entry_safe(forw_packet, tmp_node, safe_tmp_node,
+				  &bat_priv->forw_bcast_list, list) {
+
+		/**
+		 * if purge_outstanding_packets() was called with an argmument
+		 * we delete only packets belonging to the given interface
+		 */
+		if ((batman_if) &&
+		    (forw_packet->if_incoming != batman_if))
+			continue;
+
+		spin_unlock_bh(&bat_priv->forw_bcast_list_lock);
+
+		/**
+		 * send_outstanding_bcast_packet() will lock the list to
+		 * delete the item from the list
+		 */
+		cancel_delayed_work_sync(&forw_packet->delayed_work);
+		spin_lock_bh(&bat_priv->forw_bcast_list_lock);
+	}
+	spin_unlock_bh(&bat_priv->forw_bcast_list_lock);
+
+	/* free batman packet list */
+	spin_lock_bh(&bat_priv->forw_bat_list_lock);
+	hlist_for_each_entry_safe(forw_packet, tmp_node, safe_tmp_node,
+				  &bat_priv->forw_bat_list, list) {
+
+		/**
+		 * if purge_outstanding_packets() was called with an argmument
+		 * we delete only packets belonging to the given interface
+		 */
+		if ((batman_if) &&
+		    (forw_packet->if_incoming != batman_if))
+			continue;
+
+		spin_unlock_bh(&bat_priv->forw_bat_list_lock);
+
+		/**
+		 * send_outstanding_bat_packet() will lock the list to
+		 * delete the item from the list
+		 */
+		cancel_delayed_work_sync(&forw_packet->delayed_work);
+		spin_lock_bh(&bat_priv->forw_bat_list_lock);
+	}
+	spin_unlock_bh(&bat_priv->forw_bat_list_lock);
+}
diff --git a/net/batman-adv/send.h b/net/batman-adv/send.h
new file mode 100644
index 00000000000..c4cefa8e4f8
--- /dev/null
+++ b/net/batman-adv/send.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_SEND_H_
+#define _NET_BATMAN_ADV_SEND_H_
+
+#include "types.h"
+
+int send_skb_packet(struct sk_buff *skb,
+				struct batman_if *batman_if,
+				uint8_t *dst_addr);
+void schedule_own_packet(struct batman_if *batman_if);
+void schedule_forward_packet(struct orig_node *orig_node,
+			     struct ethhdr *ethhdr,
+			     struct batman_packet *batman_packet,
+			     uint8_t directlink, int hna_buff_len,
+			     struct batman_if *if_outgoing);
+int add_bcast_packet_to_list(struct bat_priv *bat_priv, struct sk_buff *skb);
+void send_outstanding_bat_packet(struct work_struct *work);
+void purge_outstanding_packets(struct bat_priv *bat_priv,
+			       struct batman_if *batman_if);
+
+#endif /* _NET_BATMAN_ADV_SEND_H_ */
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
new file mode 100644
index 00000000000..e89ede192ed
--- /dev/null
+++ b/net/batman-adv/soft-interface.c
@@ -0,0 +1,697 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "soft-interface.h"
+#include "hard-interface.h"
+#include "routing.h"
+#include "send.h"
+#include "bat_debugfs.h"
+#include "translation-table.h"
+#include "types.h"
+#include "hash.h"
+#include "gateway_common.h"
+#include "gateway_client.h"
+#include "send.h"
+#include "bat_sysfs.h"
+#include <linux/slab.h>
+#include <linux/ethtool.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include "unicast.h"
+#include "routing.h"
+
+
+static int bat_get_settings(struct net_device *dev, struct ethtool_cmd *cmd);
+static void bat_get_drvinfo(struct net_device *dev,
+			    struct ethtool_drvinfo *info);
+static u32 bat_get_msglevel(struct net_device *dev);
+static void bat_set_msglevel(struct net_device *dev, u32 value);
+static u32 bat_get_link(struct net_device *dev);
+static u32 bat_get_rx_csum(struct net_device *dev);
+static int bat_set_rx_csum(struct net_device *dev, u32 data);
+
+static const struct ethtool_ops bat_ethtool_ops = {
+	.get_settings = bat_get_settings,
+	.get_drvinfo = bat_get_drvinfo,
+	.get_msglevel = bat_get_msglevel,
+	.set_msglevel = bat_set_msglevel,
+	.get_link = bat_get_link,
+	.get_rx_csum = bat_get_rx_csum,
+	.set_rx_csum = bat_set_rx_csum
+};
+
+int my_skb_head_push(struct sk_buff *skb, unsigned int len)
+{
+	int result;
+
+	/**
+	 * TODO: We must check if we can release all references to non-payload
+	 * data using skb_header_release in our skbs to allow skb_cow_header to
+	 * work optimally. This means that those skbs are not allowed to read
+	 * or write any data which is before the current position of skb->data
+	 * after that call and thus allow other skbs with the same data buffer
+	 * to write freely in that area.
+	 */
+	result = skb_cow_head(skb, len);
+	if (result < 0)
+		return result;
+
+	skb_push(skb, len);
+	return 0;
+}
+
+static void softif_neigh_free_ref(struct kref *refcount)
+{
+	struct softif_neigh *softif_neigh;
+
+	softif_neigh = container_of(refcount, struct softif_neigh, refcount);
+	kfree(softif_neigh);
+}
+
+static void softif_neigh_free_rcu(struct rcu_head *rcu)
+{
+	struct softif_neigh *softif_neigh;
+
+	softif_neigh = container_of(rcu, struct softif_neigh, rcu);
+	kref_put(&softif_neigh->refcount, softif_neigh_free_ref);
+}
+
+void softif_neigh_purge(struct bat_priv *bat_priv)
+{
+	struct softif_neigh *softif_neigh, *softif_neigh_tmp;
+	struct hlist_node *node, *node_tmp;
+
+	spin_lock_bh(&bat_priv->softif_neigh_lock);
+
+	hlist_for_each_entry_safe(softif_neigh, node, node_tmp,
+				  &bat_priv->softif_neigh_list, list) {
+
+		if ((!time_after(jiffies, softif_neigh->last_seen +
+				msecs_to_jiffies(SOFTIF_NEIGH_TIMEOUT))) &&
+		    (atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE))
+			continue;
+
+		hlist_del_rcu(&softif_neigh->list);
+
+		if (bat_priv->softif_neigh == softif_neigh) {
+			bat_dbg(DBG_ROUTES, bat_priv,
+				 "Current mesh exit point '%pM' vanished "
+				 "(vid: %d).\n",
+				 softif_neigh->addr, softif_neigh->vid);
+			softif_neigh_tmp = bat_priv->softif_neigh;
+			bat_priv->softif_neigh = NULL;
+			kref_put(&softif_neigh_tmp->refcount,
+				 softif_neigh_free_ref);
+		}
+
+		call_rcu(&softif_neigh->rcu, softif_neigh_free_rcu);
+	}
+
+	spin_unlock_bh(&bat_priv->softif_neigh_lock);
+}
+
+static struct softif_neigh *softif_neigh_get(struct bat_priv *bat_priv,
+					     uint8_t *addr, short vid)
+{
+	struct softif_neigh *softif_neigh;
+	struct hlist_node *node;
+
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(softif_neigh, node,
+				 &bat_priv->softif_neigh_list, list) {
+		if (memcmp(softif_neigh->addr, addr, ETH_ALEN) != 0)
+			continue;
+
+		if (softif_neigh->vid != vid)
+			continue;
+
+		softif_neigh->last_seen = jiffies;
+		goto found;
+	}
+
+	softif_neigh = kzalloc(sizeof(struct softif_neigh), GFP_ATOMIC);
+	if (!softif_neigh)
+		goto out;
+
+	memcpy(softif_neigh->addr, addr, ETH_ALEN);
+	softif_neigh->vid = vid;
+	softif_neigh->last_seen = jiffies;
+	kref_init(&softif_neigh->refcount);
+
+	INIT_HLIST_NODE(&softif_neigh->list);
+	spin_lock_bh(&bat_priv->softif_neigh_lock);
+	hlist_add_head_rcu(&softif_neigh->list, &bat_priv->softif_neigh_list);
+	spin_unlock_bh(&bat_priv->softif_neigh_lock);
+
+found:
+	kref_get(&softif_neigh->refcount);
+out:
+	rcu_read_unlock();
+	return softif_neigh;
+}
+
+int softif_neigh_seq_print_text(struct seq_file *seq, void *offset)
+{
+	struct net_device *net_dev = (struct net_device *)seq->private;
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	struct softif_neigh *softif_neigh;
+	struct hlist_node *node;
+	size_t buf_size, pos;
+	char *buff;
+
+	if (!bat_priv->primary_if) {
+		return seq_printf(seq, "BATMAN mesh %s disabled - "
+			       "please specify interfaces to enable it\n",
+			       net_dev->name);
+	}
+
+	seq_printf(seq, "Softif neighbor list (%s)\n", net_dev->name);
+
+	buf_size = 1;
+	/* Estimate length for: "   xx:xx:xx:xx:xx:xx\n" */
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(softif_neigh, node,
+				 &bat_priv->softif_neigh_list, list)
+		buf_size += 30;
+	rcu_read_unlock();
+
+	buff = kmalloc(buf_size, GFP_ATOMIC);
+	if (!buff)
+		return -ENOMEM;
+
+	buff[0] = '\0';
+	pos = 0;
+
+	rcu_read_lock();
+	hlist_for_each_entry_rcu(softif_neigh, node,
+				 &bat_priv->softif_neigh_list, list) {
+		pos += snprintf(buff + pos, 31, "%s %pM (vid: %d)\n",
+				bat_priv->softif_neigh == softif_neigh
+				? "=>" : "  ", softif_neigh->addr,
+				softif_neigh->vid);
+	}
+	rcu_read_unlock();
+
+	seq_printf(seq, "%s", buff);
+	kfree(buff);
+	return 0;
+}
+
+static void softif_batman_recv(struct sk_buff *skb, struct net_device *dev,
+			       short vid)
+{
+	struct bat_priv *bat_priv = netdev_priv(dev);
+	struct ethhdr *ethhdr = (struct ethhdr *)skb->data;
+	struct batman_packet *batman_packet;
+	struct softif_neigh *softif_neigh, *softif_neigh_tmp;
+
+	if (ntohs(ethhdr->h_proto) == ETH_P_8021Q)
+		batman_packet = (struct batman_packet *)
+					(skb->data + ETH_HLEN + VLAN_HLEN);
+	else
+		batman_packet = (struct batman_packet *)(skb->data + ETH_HLEN);
+
+	if (batman_packet->version != COMPAT_VERSION)
+		goto err;
+
+	if (batman_packet->packet_type != BAT_PACKET)
+		goto err;
+
+	if (!(batman_packet->flags & PRIMARIES_FIRST_HOP))
+		goto err;
+
+	if (is_my_mac(batman_packet->orig))
+		goto err;
+
+	softif_neigh = softif_neigh_get(bat_priv, batman_packet->orig, vid);
+
+	if (!softif_neigh)
+		goto err;
+
+	if (bat_priv->softif_neigh == softif_neigh)
+		goto out;
+
+	/* we got a neighbor but its mac is 'bigger' than ours  */
+	if (memcmp(bat_priv->primary_if->net_dev->dev_addr,
+		   softif_neigh->addr, ETH_ALEN) < 0)
+		goto out;
+
+	/* switch to new 'smallest neighbor' */
+	if ((bat_priv->softif_neigh) &&
+	    (memcmp(softif_neigh->addr, bat_priv->softif_neigh->addr,
+							ETH_ALEN) < 0)) {
+		bat_dbg(DBG_ROUTES, bat_priv,
+			"Changing mesh exit point from %pM (vid: %d) "
+			"to %pM (vid: %d).\n",
+			 bat_priv->softif_neigh->addr,
+			 bat_priv->softif_neigh->vid,
+			 softif_neigh->addr, softif_neigh->vid);
+		softif_neigh_tmp = bat_priv->softif_neigh;
+		bat_priv->softif_neigh = softif_neigh;
+		kref_put(&softif_neigh_tmp->refcount, softif_neigh_free_ref);
+		/* we need to hold the additional reference */
+		goto err;
+	}
+
+	/* close own batX device and use softif_neigh as exit node */
+	if ((!bat_priv->softif_neigh) &&
+	    (memcmp(softif_neigh->addr,
+		    bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN) < 0)) {
+		bat_dbg(DBG_ROUTES, bat_priv,
+			"Setting mesh exit point to %pM (vid: %d).\n",
+			softif_neigh->addr, softif_neigh->vid);
+		bat_priv->softif_neigh = softif_neigh;
+		/* we need to hold the additional reference */
+		goto err;
+	}
+
+out:
+	kref_put(&softif_neigh->refcount, softif_neigh_free_ref);
+err:
+	kfree_skb(skb);
+	return;
+}
+
+static int interface_open(struct net_device *dev)
+{
+	netif_start_queue(dev);
+	return 0;
+}
+
+static int interface_release(struct net_device *dev)
+{
+	netif_stop_queue(dev);
+	return 0;
+}
+
+static struct net_device_stats *interface_stats(struct net_device *dev)
+{
+	struct bat_priv *bat_priv = netdev_priv(dev);
+	return &bat_priv->stats;
+}
+
+static int interface_set_mac_addr(struct net_device *dev, void *p)
+{
+	struct bat_priv *bat_priv = netdev_priv(dev);
+	struct sockaddr *addr = p;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	/* only modify hna-table if it has been initialised before */
+	if (atomic_read(&bat_priv->mesh_state) == MESH_ACTIVE) {
+		hna_local_remove(bat_priv, dev->dev_addr,
+				 "mac address changed");
+		hna_local_add(dev, addr->sa_data);
+	}
+
+	memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
+	return 0;
+}
+
+static int interface_change_mtu(struct net_device *dev, int new_mtu)
+{
+	/* check ranges */
+	if ((new_mtu < 68) || (new_mtu > hardif_min_mtu(dev)))
+		return -EINVAL;
+
+	dev->mtu = new_mtu;
+
+	return 0;
+}
+
+int interface_tx(struct sk_buff *skb, struct net_device *soft_iface)
+{
+	struct ethhdr *ethhdr = (struct ethhdr *)skb->data;
+	struct bat_priv *bat_priv = netdev_priv(soft_iface);
+	struct bcast_packet *bcast_packet;
+	struct vlan_ethhdr *vhdr;
+	int data_len = skb->len, ret;
+	short vid = -1;
+	bool do_bcast = false;
+
+	if (atomic_read(&bat_priv->mesh_state) != MESH_ACTIVE)
+		goto dropped;
+
+	soft_iface->trans_start = jiffies;
+
+	switch (ntohs(ethhdr->h_proto)) {
+	case ETH_P_8021Q:
+		vhdr = (struct vlan_ethhdr *)skb->data;
+		vid = ntohs(vhdr->h_vlan_TCI) & VLAN_VID_MASK;
+
+		if (ntohs(vhdr->h_vlan_encapsulated_proto) != ETH_P_BATMAN)
+			break;
+
+		/* fall through */
+	case ETH_P_BATMAN:
+		softif_batman_recv(skb, soft_iface, vid);
+		goto end;
+	}
+
+	/**
+	 * if we have a another chosen mesh exit node in range
+	 * it will transport the packets to the mesh
+	 */
+	if ((bat_priv->softif_neigh) && (bat_priv->softif_neigh->vid == vid))
+		goto dropped;
+
+	/* TODO: check this for locks */
+	hna_local_add(soft_iface, ethhdr->h_source);
+
+	if (is_multicast_ether_addr(ethhdr->h_dest)) {
+		ret = gw_is_target(bat_priv, skb);
+
+		if (ret < 0)
+			goto dropped;
+
+		if (ret == 0)
+			do_bcast = true;
+	}
+
+	/* ethernet packet should be broadcasted */
+	if (do_bcast) {
+		if (!bat_priv->primary_if)
+			goto dropped;
+
+		if (my_skb_head_push(skb, sizeof(struct bcast_packet)) < 0)
+			goto dropped;
+
+		bcast_packet = (struct bcast_packet *)skb->data;
+		bcast_packet->version = COMPAT_VERSION;
+		bcast_packet->ttl = TTL;
+
+		/* batman packet type: broadcast */
+		bcast_packet->packet_type = BAT_BCAST;
+
+		/* hw address of first interface is the orig mac because only
+		 * this mac is known throughout the mesh */
+		memcpy(bcast_packet->orig,
+		       bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+
+		/* set broadcast sequence number */
+		bcast_packet->seqno =
+			htonl(atomic_inc_return(&bat_priv->bcast_seqno));
+
+		add_bcast_packet_to_list(bat_priv, skb);
+
+		/* a copy is stored in the bcast list, therefore removing
+		 * the original skb. */
+		kfree_skb(skb);
+
+	/* unicast packet */
+	} else {
+		ret = unicast_send_skb(skb, bat_priv);
+		if (ret != 0)
+			goto dropped_freed;
+	}
+
+	bat_priv->stats.tx_packets++;
+	bat_priv->stats.tx_bytes += data_len;
+	goto end;
+
+dropped:
+	kfree_skb(skb);
+dropped_freed:
+	bat_priv->stats.tx_dropped++;
+end:
+	return NETDEV_TX_OK;
+}
+
+void interface_rx(struct net_device *soft_iface,
+		  struct sk_buff *skb, struct batman_if *recv_if,
+		  int hdr_size)
+{
+	struct bat_priv *bat_priv = netdev_priv(soft_iface);
+	struct unicast_packet *unicast_packet;
+	struct ethhdr *ethhdr;
+	struct vlan_ethhdr *vhdr;
+	short vid = -1;
+	int ret;
+
+	/* check if enough space is available for pulling, and pull */
+	if (!pskb_may_pull(skb, hdr_size))
+		goto dropped;
+
+	skb_pull_rcsum(skb, hdr_size);
+	skb_reset_mac_header(skb);
+
+	ethhdr = (struct ethhdr *)skb_mac_header(skb);
+
+	switch (ntohs(ethhdr->h_proto)) {
+	case ETH_P_8021Q:
+		vhdr = (struct vlan_ethhdr *)skb->data;
+		vid = ntohs(vhdr->h_vlan_TCI) & VLAN_VID_MASK;
+
+		if (ntohs(vhdr->h_vlan_encapsulated_proto) != ETH_P_BATMAN)
+			break;
+
+		/* fall through */
+	case ETH_P_BATMAN:
+		goto dropped;
+	}
+
+	/**
+	 * if we have a another chosen mesh exit node in range
+	 * it will transport the packets to the non-mesh network
+	 */
+	if ((bat_priv->softif_neigh) && (bat_priv->softif_neigh->vid == vid)) {
+		skb_push(skb, hdr_size);
+		unicast_packet = (struct unicast_packet *)skb->data;
+
+		if ((unicast_packet->packet_type != BAT_UNICAST) &&
+		    (unicast_packet->packet_type != BAT_UNICAST_FRAG))
+			goto dropped;
+
+		skb_reset_mac_header(skb);
+
+		memcpy(unicast_packet->dest,
+		       bat_priv->softif_neigh->addr, ETH_ALEN);
+		ret = route_unicast_packet(skb, recv_if, hdr_size);
+		if (ret == NET_RX_DROP)
+			goto dropped;
+
+		goto out;
+	}
+
+	/* skb->dev & skb->pkt_type are set here */
+	if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
+		goto dropped;
+	skb->protocol = eth_type_trans(skb, soft_iface);
+
+	/* should not be neccesary anymore as we use skb_pull_rcsum()
+	 * TODO: please verify this and remove this TODO
+	 * -- Dec 21st 2009, Simon Wunderlich */
+
+/*	skb->ip_summed = CHECKSUM_UNNECESSARY;*/
+
+	bat_priv->stats.rx_packets++;
+	bat_priv->stats.rx_bytes += skb->len + sizeof(struct ethhdr);
+
+	soft_iface->last_rx = jiffies;
+
+	netif_rx(skb);
+	return;
+
+dropped:
+	kfree_skb(skb);
+out:
+	return;
+}
+
+#ifdef HAVE_NET_DEVICE_OPS
+static const struct net_device_ops bat_netdev_ops = {
+	.ndo_open = interface_open,
+	.ndo_stop = interface_release,
+	.ndo_get_stats = interface_stats,
+	.ndo_set_mac_address = interface_set_mac_addr,
+	.ndo_change_mtu = interface_change_mtu,
+	.ndo_start_xmit = interface_tx,
+	.ndo_validate_addr = eth_validate_addr
+};
+#endif
+
+static void interface_setup(struct net_device *dev)
+{
+	struct bat_priv *priv = netdev_priv(dev);
+	char dev_addr[ETH_ALEN];
+
+	ether_setup(dev);
+
+#ifdef HAVE_NET_DEVICE_OPS
+	dev->netdev_ops = &bat_netdev_ops;
+#else
+	dev->open = interface_open;
+	dev->stop = interface_release;
+	dev->get_stats = interface_stats;
+	dev->set_mac_address = interface_set_mac_addr;
+	dev->change_mtu = interface_change_mtu;
+	dev->hard_start_xmit = interface_tx;
+#endif
+	dev->destructor = free_netdev;
+
+	/**
+	 * can't call min_mtu, because the needed variables
+	 * have not been initialized yet
+	 */
+	dev->mtu = ETH_DATA_LEN;
+	dev->hard_header_len = BAT_HEADER_LEN; /* reserve more space in the
+						* skbuff for our header */
+
+	/* generate random address */
+	random_ether_addr(dev_addr);
+	memcpy(dev->dev_addr, dev_addr, ETH_ALEN);
+
+	SET_ETHTOOL_OPS(dev, &bat_ethtool_ops);
+
+	memset(priv, 0, sizeof(struct bat_priv));
+}
+
+struct net_device *softif_create(char *name)
+{
+	struct net_device *soft_iface;
+	struct bat_priv *bat_priv;
+	int ret;
+
+	soft_iface = alloc_netdev(sizeof(struct bat_priv) , name,
+				   interface_setup);
+
+	if (!soft_iface) {
+		pr_err("Unable to allocate the batman interface: %s\n", name);
+		goto out;
+	}
+
+	ret = register_netdev(soft_iface);
+	if (ret < 0) {
+		pr_err("Unable to register the batman interface '%s': %i\n",
+		       name, ret);
+		goto free_soft_iface;
+	}
+
+	bat_priv = netdev_priv(soft_iface);
+
+	atomic_set(&bat_priv->aggregated_ogms, 1);
+	atomic_set(&bat_priv->bonding, 0);
+	atomic_set(&bat_priv->vis_mode, VIS_TYPE_CLIENT_UPDATE);
+	atomic_set(&bat_priv->gw_mode, GW_MODE_OFF);
+	atomic_set(&bat_priv->gw_sel_class, 20);
+	atomic_set(&bat_priv->gw_bandwidth, 41);
+	atomic_set(&bat_priv->orig_interval, 1000);
+	atomic_set(&bat_priv->hop_penalty, 10);
+	atomic_set(&bat_priv->log_level, 0);
+	atomic_set(&bat_priv->fragmentation, 1);
+	atomic_set(&bat_priv->bcast_queue_left, BCAST_QUEUE_LEN);
+	atomic_set(&bat_priv->batman_queue_left, BATMAN_QUEUE_LEN);
+
+	atomic_set(&bat_priv->mesh_state, MESH_INACTIVE);
+	atomic_set(&bat_priv->bcast_seqno, 1);
+	atomic_set(&bat_priv->hna_local_changed, 0);
+
+	bat_priv->primary_if = NULL;
+	bat_priv->num_ifaces = 0;
+	bat_priv->softif_neigh = NULL;
+
+	ret = sysfs_add_meshif(soft_iface);
+	if (ret < 0)
+		goto unreg_soft_iface;
+
+	ret = debugfs_add_meshif(soft_iface);
+	if (ret < 0)
+		goto unreg_sysfs;
+
+	ret = mesh_init(soft_iface);
+	if (ret < 0)
+		goto unreg_debugfs;
+
+	return soft_iface;
+
+unreg_debugfs:
+	debugfs_del_meshif(soft_iface);
+unreg_sysfs:
+	sysfs_del_meshif(soft_iface);
+unreg_soft_iface:
+	unregister_netdev(soft_iface);
+	return NULL;
+
+free_soft_iface:
+	free_netdev(soft_iface);
+out:
+	return NULL;
+}
+
+void softif_destroy(struct net_device *soft_iface)
+{
+	debugfs_del_meshif(soft_iface);
+	sysfs_del_meshif(soft_iface);
+	mesh_free(soft_iface);
+	unregister_netdevice(soft_iface);
+}
+
+/* ethtool */
+static int bat_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	cmd->supported = 0;
+	cmd->advertising = 0;
+	cmd->speed = SPEED_10;
+	cmd->duplex = DUPLEX_FULL;
+	cmd->port = PORT_TP;
+	cmd->phy_address = 0;
+	cmd->transceiver = XCVR_INTERNAL;
+	cmd->autoneg = AUTONEG_DISABLE;
+	cmd->maxtxpkt = 0;
+	cmd->maxrxpkt = 0;
+
+	return 0;
+}
+
+static void bat_get_drvinfo(struct net_device *dev,
+			    struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, "B.A.T.M.A.N. advanced");
+	strcpy(info->version, SOURCE_VERSION);
+	strcpy(info->fw_version, "N/A");
+	strcpy(info->bus_info, "batman");
+}
+
+static u32 bat_get_msglevel(struct net_device *dev)
+{
+	return -EOPNOTSUPP;
+}
+
+static void bat_set_msglevel(struct net_device *dev, u32 value)
+{
+}
+
+static u32 bat_get_link(struct net_device *dev)
+{
+	return 1;
+}
+
+static u32 bat_get_rx_csum(struct net_device *dev)
+{
+	return 0;
+}
+
+static int bat_set_rx_csum(struct net_device *dev, u32 data)
+{
+	return -EOPNOTSUPP;
+}
diff --git a/net/batman-adv/soft-interface.h b/net/batman-adv/soft-interface.h
new file mode 100644
index 00000000000..02b77334d10
--- /dev/null
+++ b/net/batman-adv/soft-interface.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_SOFT_INTERFACE_H_
+#define _NET_BATMAN_ADV_SOFT_INTERFACE_H_
+
+int my_skb_head_push(struct sk_buff *skb, unsigned int len);
+int softif_neigh_seq_print_text(struct seq_file *seq, void *offset);
+void softif_neigh_purge(struct bat_priv *bat_priv);
+int interface_tx(struct sk_buff *skb, struct net_device *soft_iface);
+void interface_rx(struct net_device *soft_iface,
+		  struct sk_buff *skb, struct batman_if *recv_if,
+		  int hdr_size);
+struct net_device *softif_create(char *name);
+void softif_destroy(struct net_device *soft_iface);
+
+#endif /* _NET_BATMAN_ADV_SOFT_INTERFACE_H_ */
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
new file mode 100644
index 00000000000..a633b5a435e
--- /dev/null
+++ b/net/batman-adv/translation-table.c
@@ -0,0 +1,534 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "translation-table.h"
+#include "soft-interface.h"
+#include "types.h"
+#include "hash.h"
+#include "originator.h"
+
+static void hna_local_purge(struct work_struct *work);
+static void _hna_global_del_orig(struct bat_priv *bat_priv,
+				 struct hna_global_entry *hna_global_entry,
+				 char *message);
+
+static void hna_local_start_timer(struct bat_priv *bat_priv)
+{
+	INIT_DELAYED_WORK(&bat_priv->hna_work, hna_local_purge);
+	queue_delayed_work(bat_event_workqueue, &bat_priv->hna_work, 10 * HZ);
+}
+
+int hna_local_init(struct bat_priv *bat_priv)
+{
+	if (bat_priv->hna_local_hash)
+		return 1;
+
+	bat_priv->hna_local_hash = hash_new(1024);
+
+	if (!bat_priv->hna_local_hash)
+		return 0;
+
+	atomic_set(&bat_priv->hna_local_changed, 0);
+	hna_local_start_timer(bat_priv);
+
+	return 1;
+}
+
+void hna_local_add(struct net_device *soft_iface, uint8_t *addr)
+{
+	struct bat_priv *bat_priv = netdev_priv(soft_iface);
+	struct hna_local_entry *hna_local_entry;
+	struct hna_global_entry *hna_global_entry;
+	int required_bytes;
+
+	spin_lock_bh(&bat_priv->hna_lhash_lock);
+	hna_local_entry =
+		((struct hna_local_entry *)hash_find(bat_priv->hna_local_hash,
+						     compare_orig, choose_orig,
+						     addr));
+	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+
+	if (hna_local_entry) {
+		hna_local_entry->last_seen = jiffies;
+		return;
+	}
+
+	/* only announce as many hosts as possible in the batman-packet and
+	   space in batman_packet->num_hna That also should give a limit to
+	   MAC-flooding. */
+	required_bytes = (bat_priv->num_local_hna + 1) * ETH_ALEN;
+	required_bytes += BAT_PACKET_LEN;
+
+	if ((required_bytes > ETH_DATA_LEN) ||
+	    (atomic_read(&bat_priv->aggregated_ogms) &&
+	     required_bytes > MAX_AGGREGATION_BYTES) ||
+	    (bat_priv->num_local_hna + 1 > 255)) {
+		bat_dbg(DBG_ROUTES, bat_priv,
+			"Can't add new local hna entry (%pM): "
+			"number of local hna entries exceeds packet size\n",
+			addr);
+		return;
+	}
+
+	bat_dbg(DBG_ROUTES, bat_priv,
+		"Creating new local hna entry: %pM\n", addr);
+
+	hna_local_entry = kmalloc(sizeof(struct hna_local_entry), GFP_ATOMIC);
+	if (!hna_local_entry)
+		return;
+
+	memcpy(hna_local_entry->addr, addr, ETH_ALEN);
+	hna_local_entry->last_seen = jiffies;
+
+	/* the batman interface mac address should never be purged */
+	if (compare_orig(addr, soft_iface->dev_addr))
+		hna_local_entry->never_purge = 1;
+	else
+		hna_local_entry->never_purge = 0;
+
+	spin_lock_bh(&bat_priv->hna_lhash_lock);
+
+	hash_add(bat_priv->hna_local_hash, compare_orig, choose_orig,
+		 hna_local_entry);
+	bat_priv->num_local_hna++;
+	atomic_set(&bat_priv->hna_local_changed, 1);
+
+	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+
+	/* remove address from global hash if present */
+	spin_lock_bh(&bat_priv->hna_ghash_lock);
+
+	hna_global_entry = ((struct hna_global_entry *)
+				hash_find(bat_priv->hna_global_hash,
+					  compare_orig, choose_orig, addr));
+
+	if (hna_global_entry)
+		_hna_global_del_orig(bat_priv, hna_global_entry,
+				     "local hna received");
+
+	spin_unlock_bh(&bat_priv->hna_ghash_lock);
+}
+
+int hna_local_fill_buffer(struct bat_priv *bat_priv,
+			  unsigned char *buff, int buff_len)
+{
+	struct hashtable_t *hash = bat_priv->hna_local_hash;
+	struct hna_local_entry *hna_local_entry;
+	struct element_t *bucket;
+	int i;
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	int count = 0;
+
+	spin_lock_bh(&bat_priv->hna_lhash_lock);
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+
+			if (buff_len < (count + 1) * ETH_ALEN)
+				break;
+
+			hna_local_entry = bucket->data;
+			memcpy(buff + (count * ETH_ALEN), hna_local_entry->addr,
+			       ETH_ALEN);
+
+			count++;
+		}
+	}
+
+	/* if we did not get all new local hnas see you next time  ;-) */
+	if (count == bat_priv->num_local_hna)
+		atomic_set(&bat_priv->hna_local_changed, 0);
+
+	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+	return count;
+}
+
+int hna_local_seq_print_text(struct seq_file *seq, void *offset)
+{
+	struct net_device *net_dev = (struct net_device *)seq->private;
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	struct hashtable_t *hash = bat_priv->hna_local_hash;
+	struct hna_local_entry *hna_local_entry;
+	int i;
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	size_t buf_size, pos;
+	char *buff;
+
+	if (!bat_priv->primary_if) {
+		return seq_printf(seq, "BATMAN mesh %s disabled - "
+			       "please specify interfaces to enable it\n",
+			       net_dev->name);
+	}
+
+	seq_printf(seq, "Locally retrieved addresses (from %s) "
+		   "announced via HNA:\n",
+		   net_dev->name);
+
+	spin_lock_bh(&bat_priv->hna_lhash_lock);
+
+	buf_size = 1;
+	/* Estimate length for: " * xx:xx:xx:xx:xx:xx\n" */
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each(walk, head)
+			buf_size += 21;
+	}
+
+	buff = kmalloc(buf_size, GFP_ATOMIC);
+	if (!buff) {
+		spin_unlock_bh(&bat_priv->hna_lhash_lock);
+		return -ENOMEM;
+	}
+	buff[0] = '\0';
+	pos = 0;
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			hna_local_entry = bucket->data;
+
+			pos += snprintf(buff + pos, 22, " * %pM\n",
+					hna_local_entry->addr);
+		}
+	}
+
+	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+
+	seq_printf(seq, "%s", buff);
+	kfree(buff);
+	return 0;
+}
+
+static void _hna_local_del(void *data, void *arg)
+{
+	struct bat_priv *bat_priv = (struct bat_priv *)arg;
+
+	kfree(data);
+	bat_priv->num_local_hna--;
+	atomic_set(&bat_priv->hna_local_changed, 1);
+}
+
+static void hna_local_del(struct bat_priv *bat_priv,
+			  struct hna_local_entry *hna_local_entry,
+			  char *message)
+{
+	bat_dbg(DBG_ROUTES, bat_priv, "Deleting local hna entry (%pM): %s\n",
+		hna_local_entry->addr, message);
+
+	hash_remove(bat_priv->hna_local_hash, compare_orig, choose_orig,
+		    hna_local_entry->addr);
+	_hna_local_del(hna_local_entry, bat_priv);
+}
+
+void hna_local_remove(struct bat_priv *bat_priv,
+		      uint8_t *addr, char *message)
+{
+	struct hna_local_entry *hna_local_entry;
+
+	spin_lock_bh(&bat_priv->hna_lhash_lock);
+
+	hna_local_entry = (struct hna_local_entry *)
+		hash_find(bat_priv->hna_local_hash, compare_orig, choose_orig,
+			  addr);
+
+	if (hna_local_entry)
+		hna_local_del(bat_priv, hna_local_entry, message);
+
+	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+}
+
+static void hna_local_purge(struct work_struct *work)
+{
+	struct delayed_work *delayed_work =
+		container_of(work, struct delayed_work, work);
+	struct bat_priv *bat_priv =
+		container_of(delayed_work, struct bat_priv, hna_work);
+	struct hashtable_t *hash = bat_priv->hna_local_hash;
+	struct hna_local_entry *hna_local_entry;
+	int i;
+	struct hlist_node *walk, *safe;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	unsigned long timeout;
+
+	spin_lock_bh(&bat_priv->hna_lhash_lock);
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry_safe(bucket, walk, safe, head, hlist) {
+			hna_local_entry = bucket->data;
+
+			timeout = hna_local_entry->last_seen;
+			timeout += LOCAL_HNA_TIMEOUT * HZ;
+
+			if ((!hna_local_entry->never_purge) &&
+			    time_after(jiffies, timeout))
+				hna_local_del(bat_priv, hna_local_entry,
+					"address timed out");
+		}
+	}
+
+	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+	hna_local_start_timer(bat_priv);
+}
+
+void hna_local_free(struct bat_priv *bat_priv)
+{
+	if (!bat_priv->hna_local_hash)
+		return;
+
+	cancel_delayed_work_sync(&bat_priv->hna_work);
+	hash_delete(bat_priv->hna_local_hash, _hna_local_del, bat_priv);
+	bat_priv->hna_local_hash = NULL;
+}
+
+int hna_global_init(struct bat_priv *bat_priv)
+{
+	if (bat_priv->hna_global_hash)
+		return 1;
+
+	bat_priv->hna_global_hash = hash_new(1024);
+
+	if (!bat_priv->hna_global_hash)
+		return 0;
+
+	return 1;
+}
+
+void hna_global_add_orig(struct bat_priv *bat_priv,
+			 struct orig_node *orig_node,
+			 unsigned char *hna_buff, int hna_buff_len)
+{
+	struct hna_global_entry *hna_global_entry;
+	struct hna_local_entry *hna_local_entry;
+	int hna_buff_count = 0;
+	unsigned char *hna_ptr;
+
+	while ((hna_buff_count + 1) * ETH_ALEN <= hna_buff_len) {
+		spin_lock_bh(&bat_priv->hna_ghash_lock);
+
+		hna_ptr = hna_buff + (hna_buff_count * ETH_ALEN);
+		hna_global_entry = (struct hna_global_entry *)
+			hash_find(bat_priv->hna_global_hash, compare_orig,
+				  choose_orig, hna_ptr);
+
+		if (!hna_global_entry) {
+			spin_unlock_bh(&bat_priv->hna_ghash_lock);
+
+			hna_global_entry =
+				kmalloc(sizeof(struct hna_global_entry),
+					GFP_ATOMIC);
+
+			if (!hna_global_entry)
+				break;
+
+			memcpy(hna_global_entry->addr, hna_ptr, ETH_ALEN);
+
+			bat_dbg(DBG_ROUTES, bat_priv,
+				"Creating new global hna entry: "
+				"%pM (via %pM)\n",
+				hna_global_entry->addr, orig_node->orig);
+
+			spin_lock_bh(&bat_priv->hna_ghash_lock);
+			hash_add(bat_priv->hna_global_hash, compare_orig,
+				 choose_orig, hna_global_entry);
+
+		}
+
+		hna_global_entry->orig_node = orig_node;
+		spin_unlock_bh(&bat_priv->hna_ghash_lock);
+
+		/* remove address from local hash if present */
+		spin_lock_bh(&bat_priv->hna_lhash_lock);
+
+		hna_ptr = hna_buff + (hna_buff_count * ETH_ALEN);
+		hna_local_entry = (struct hna_local_entry *)
+			hash_find(bat_priv->hna_local_hash, compare_orig,
+				  choose_orig, hna_ptr);
+
+		if (hna_local_entry)
+			hna_local_del(bat_priv, hna_local_entry,
+				      "global hna received");
+
+		spin_unlock_bh(&bat_priv->hna_lhash_lock);
+
+		hna_buff_count++;
+	}
+
+	/* initialize, and overwrite if malloc succeeds */
+	orig_node->hna_buff = NULL;
+	orig_node->hna_buff_len = 0;
+
+	if (hna_buff_len > 0) {
+		orig_node->hna_buff = kmalloc(hna_buff_len, GFP_ATOMIC);
+		if (orig_node->hna_buff) {
+			memcpy(orig_node->hna_buff, hna_buff, hna_buff_len);
+			orig_node->hna_buff_len = hna_buff_len;
+		}
+	}
+}
+
+int hna_global_seq_print_text(struct seq_file *seq, void *offset)
+{
+	struct net_device *net_dev = (struct net_device *)seq->private;
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	struct hashtable_t *hash = bat_priv->hna_global_hash;
+	struct hna_global_entry *hna_global_entry;
+	int i;
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	size_t buf_size, pos;
+	char *buff;
+
+	if (!bat_priv->primary_if) {
+		return seq_printf(seq, "BATMAN mesh %s disabled - "
+				  "please specify interfaces to enable it\n",
+				  net_dev->name);
+	}
+
+	seq_printf(seq, "Globally announced HNAs received via the mesh %s\n",
+		   net_dev->name);
+
+	spin_lock_bh(&bat_priv->hna_ghash_lock);
+
+	buf_size = 1;
+	/* Estimate length for: " * xx:xx:xx:xx:xx:xx via xx:xx:xx:xx:xx:xx\n"*/
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each(walk, head)
+			buf_size += 43;
+	}
+
+	buff = kmalloc(buf_size, GFP_ATOMIC);
+	if (!buff) {
+		spin_unlock_bh(&bat_priv->hna_ghash_lock);
+		return -ENOMEM;
+	}
+	buff[0] = '\0';
+	pos = 0;
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			hna_global_entry = bucket->data;
+
+			pos += snprintf(buff + pos, 44,
+					" * %pM via %pM\n",
+					hna_global_entry->addr,
+					hna_global_entry->orig_node->orig);
+		}
+	}
+
+	spin_unlock_bh(&bat_priv->hna_ghash_lock);
+
+	seq_printf(seq, "%s", buff);
+	kfree(buff);
+	return 0;
+}
+
+static void _hna_global_del_orig(struct bat_priv *bat_priv,
+				 struct hna_global_entry *hna_global_entry,
+				 char *message)
+{
+	bat_dbg(DBG_ROUTES, bat_priv,
+		"Deleting global hna entry %pM (via %pM): %s\n",
+		hna_global_entry->addr, hna_global_entry->orig_node->orig,
+		message);
+
+	hash_remove(bat_priv->hna_global_hash, compare_orig, choose_orig,
+		    hna_global_entry->addr);
+	kfree(hna_global_entry);
+}
+
+void hna_global_del_orig(struct bat_priv *bat_priv,
+			 struct orig_node *orig_node, char *message)
+{
+	struct hna_global_entry *hna_global_entry;
+	int hna_buff_count = 0;
+	unsigned char *hna_ptr;
+
+	if (orig_node->hna_buff_len == 0)
+		return;
+
+	spin_lock_bh(&bat_priv->hna_ghash_lock);
+
+	while ((hna_buff_count + 1) * ETH_ALEN <= orig_node->hna_buff_len) {
+		hna_ptr = orig_node->hna_buff + (hna_buff_count * ETH_ALEN);
+		hna_global_entry = (struct hna_global_entry *)
+			hash_find(bat_priv->hna_global_hash, compare_orig,
+				  choose_orig, hna_ptr);
+
+		if ((hna_global_entry) &&
+		    (hna_global_entry->orig_node == orig_node))
+			_hna_global_del_orig(bat_priv, hna_global_entry,
+					     message);
+
+		hna_buff_count++;
+	}
+
+	spin_unlock_bh(&bat_priv->hna_ghash_lock);
+
+	orig_node->hna_buff_len = 0;
+	kfree(orig_node->hna_buff);
+	orig_node->hna_buff = NULL;
+}
+
+static void hna_global_del(void *data, void *arg)
+{
+	kfree(data);
+}
+
+void hna_global_free(struct bat_priv *bat_priv)
+{
+	if (!bat_priv->hna_global_hash)
+		return;
+
+	hash_delete(bat_priv->hna_global_hash, hna_global_del, NULL);
+	bat_priv->hna_global_hash = NULL;
+}
+
+struct orig_node *transtable_search(struct bat_priv *bat_priv, uint8_t *addr)
+{
+	struct hna_global_entry *hna_global_entry;
+
+	spin_lock_bh(&bat_priv->hna_ghash_lock);
+	hna_global_entry = (struct hna_global_entry *)
+				hash_find(bat_priv->hna_global_hash,
+					  compare_orig, choose_orig, addr);
+	spin_unlock_bh(&bat_priv->hna_ghash_lock);
+
+	if (!hna_global_entry)
+		return NULL;
+
+	return hna_global_entry->orig_node;
+}
diff --git a/net/batman-adv/translation-table.h b/net/batman-adv/translation-table.h
new file mode 100644
index 00000000000..10c4c5c319b
--- /dev/null
+++ b/net/batman-adv/translation-table.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_TRANSLATION_TABLE_H_
+#define _NET_BATMAN_ADV_TRANSLATION_TABLE_H_
+
+#include "types.h"
+
+int hna_local_init(struct bat_priv *bat_priv);
+void hna_local_add(struct net_device *soft_iface, uint8_t *addr);
+void hna_local_remove(struct bat_priv *bat_priv,
+		      uint8_t *addr, char *message);
+int hna_local_fill_buffer(struct bat_priv *bat_priv,
+			  unsigned char *buff, int buff_len);
+int hna_local_seq_print_text(struct seq_file *seq, void *offset);
+void hna_local_free(struct bat_priv *bat_priv);
+int hna_global_init(struct bat_priv *bat_priv);
+void hna_global_add_orig(struct bat_priv *bat_priv,
+			 struct orig_node *orig_node,
+			 unsigned char *hna_buff, int hna_buff_len);
+int hna_global_seq_print_text(struct seq_file *seq, void *offset);
+void hna_global_del_orig(struct bat_priv *bat_priv,
+			 struct orig_node *orig_node, char *message);
+void hna_global_free(struct bat_priv *bat_priv);
+struct orig_node *transtable_search(struct bat_priv *bat_priv, uint8_t *addr);
+
+#endif /* _NET_BATMAN_ADV_TRANSLATION_TABLE_H_ */
diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h
new file mode 100644
index 00000000000..97cb23dd3e6
--- /dev/null
+++ b/net/batman-adv/types.h
@@ -0,0 +1,271 @@
+/*
+ * Copyright (C) 2007-2010 B.A.T.M.A.N. contributors:
+ *
+ * Marek Lindner, Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+
+
+#ifndef _NET_BATMAN_ADV_TYPES_H_
+#define _NET_BATMAN_ADV_TYPES_H_
+
+#include "packet.h"
+#include "bitarray.h"
+
+#define BAT_HEADER_LEN (sizeof(struct ethhdr) + \
+	((sizeof(struct unicast_packet) > sizeof(struct bcast_packet) ? \
+	 sizeof(struct unicast_packet) : \
+	 sizeof(struct bcast_packet))))
+
+
+struct batman_if {
+	struct list_head list;
+	int16_t if_num;
+	char if_status;
+	struct net_device *net_dev;
+	atomic_t seqno;
+	atomic_t frag_seqno;
+	unsigned char *packet_buff;
+	int packet_len;
+	struct kobject *hardif_obj;
+	struct kref refcount;
+	struct packet_type batman_adv_ptype;
+	struct net_device *soft_iface;
+	struct rcu_head rcu;
+};
+
+/**
+ *	orig_node - structure for orig_list maintaining nodes of mesh
+ *	@primary_addr: hosts primary interface address
+ *	@last_valid: when last packet from this node was received
+ *	@bcast_seqno_reset: time when the broadcast seqno window was reset
+ *	@batman_seqno_reset: time when the batman seqno window was reset
+ *	@gw_flags: flags related to gateway class
+ *	@flags: for now only VIS_SERVER flag
+ *	@last_real_seqno: last and best known squence number
+ *	@last_ttl: ttl of last received packet
+ *	@last_bcast_seqno: last broadcast sequence number received by this host
+ *
+ *	@candidates: how many candidates are available
+ *	@selected: next bonding candidate
+ */
+struct orig_node {
+	uint8_t orig[ETH_ALEN];
+	uint8_t primary_addr[ETH_ALEN];
+	struct neigh_node *router;
+	unsigned long *bcast_own;
+	uint8_t *bcast_own_sum;
+	uint8_t tq_own;
+	int tq_asym_penalty;
+	unsigned long last_valid;
+	unsigned long bcast_seqno_reset;
+	unsigned long batman_seqno_reset;
+	uint8_t gw_flags;
+	uint8_t flags;
+	unsigned char *hna_buff;
+	int16_t hna_buff_len;
+	uint32_t last_real_seqno;
+	uint8_t last_ttl;
+	unsigned long bcast_bits[NUM_WORDS];
+	uint32_t last_bcast_seqno;
+	struct list_head neigh_list;
+	struct list_head frag_list;
+	unsigned long last_frag_packet;
+	struct {
+		uint8_t candidates;
+		struct neigh_node *selected;
+	} bond;
+};
+
+struct gw_node {
+	struct hlist_node list;
+	struct orig_node *orig_node;
+	unsigned long deleted;
+	struct kref refcount;
+	struct rcu_head rcu;
+};
+
+/**
+ *	neigh_node
+ *	@last_valid: when last packet via this neighbor was received
+ */
+struct neigh_node {
+	struct list_head list;
+	uint8_t addr[ETH_ALEN];
+	uint8_t real_packet_count;
+	uint8_t tq_recv[TQ_GLOBAL_WINDOW_SIZE];
+	uint8_t tq_index;
+	uint8_t tq_avg;
+	uint8_t last_ttl;
+	struct neigh_node *next_bond_candidate;
+	unsigned long last_valid;
+	unsigned long real_bits[NUM_WORDS];
+	struct orig_node *orig_node;
+	struct batman_if *if_incoming;
+};
+
+
+struct bat_priv {
+	atomic_t mesh_state;
+	struct net_device_stats stats;
+	atomic_t aggregated_ogms;	/* boolean */
+	atomic_t bonding;		/* boolean */
+	atomic_t fragmentation;		/* boolean */
+	atomic_t vis_mode;		/* VIS_TYPE_* */
+	atomic_t gw_mode;		/* GW_MODE_* */
+	atomic_t gw_sel_class;		/* uint */
+	atomic_t gw_bandwidth;		/* gw bandwidth */
+	atomic_t orig_interval;		/* uint */
+	atomic_t hop_penalty;		/* uint */
+	atomic_t log_level;		/* uint */
+	atomic_t bcast_seqno;
+	atomic_t bcast_queue_left;
+	atomic_t batman_queue_left;
+	char num_ifaces;
+	struct hlist_head softif_neigh_list;
+	struct softif_neigh *softif_neigh;
+	struct debug_log *debug_log;
+	struct batman_if *primary_if;
+	struct kobject *mesh_obj;
+	struct dentry *debug_dir;
+	struct hlist_head forw_bat_list;
+	struct hlist_head forw_bcast_list;
+	struct hlist_head gw_list;
+	struct list_head vis_send_list;
+	struct hashtable_t *orig_hash;
+	struct hashtable_t *hna_local_hash;
+	struct hashtable_t *hna_global_hash;
+	struct hashtable_t *vis_hash;
+	spinlock_t orig_hash_lock; /* protects orig_hash */
+	spinlock_t forw_bat_list_lock; /* protects forw_bat_list */
+	spinlock_t forw_bcast_list_lock; /* protects  */
+	spinlock_t hna_lhash_lock; /* protects hna_local_hash */
+	spinlock_t hna_ghash_lock; /* protects hna_global_hash */
+	spinlock_t gw_list_lock; /* protects gw_list */
+	spinlock_t vis_hash_lock; /* protects vis_hash */
+	spinlock_t vis_list_lock; /* protects vis_info::recv_list */
+	spinlock_t softif_neigh_lock; /* protects soft-interface neigh list */
+	int16_t num_local_hna;
+	atomic_t hna_local_changed;
+	struct delayed_work hna_work;
+	struct delayed_work orig_work;
+	struct delayed_work vis_work;
+	struct gw_node *curr_gw;
+	struct vis_info *my_vis_info;
+};
+
+struct socket_client {
+	struct list_head queue_list;
+	unsigned int queue_len;
+	unsigned char index;
+	spinlock_t lock; /* protects queue_list, queue_len, index */
+	wait_queue_head_t queue_wait;
+	struct bat_priv *bat_priv;
+};
+
+struct socket_packet {
+	struct list_head list;
+	size_t icmp_len;
+	struct icmp_packet_rr icmp_packet;
+};
+
+struct hna_local_entry {
+	uint8_t addr[ETH_ALEN];
+	unsigned long last_seen;
+	char never_purge;
+};
+
+struct hna_global_entry {
+	uint8_t addr[ETH_ALEN];
+	struct orig_node *orig_node;
+};
+
+/**
+ *	forw_packet - structure for forw_list maintaining packets to be
+ *	              send/forwarded
+ */
+struct forw_packet {
+	struct hlist_node list;
+	unsigned long send_time;
+	uint8_t own;
+	struct sk_buff *skb;
+	uint16_t packet_len;
+	uint32_t direct_link_flags;
+	uint8_t num_packets;
+	struct delayed_work delayed_work;
+	struct batman_if *if_incoming;
+};
+
+/* While scanning for vis-entries of a particular vis-originator
+ * this list collects its interfaces to create a subgraph/cluster
+ * out of them later
+ */
+struct if_list_entry {
+	uint8_t addr[ETH_ALEN];
+	bool primary;
+	struct hlist_node list;
+};
+
+struct debug_log {
+	char log_buff[LOG_BUF_LEN];
+	unsigned long log_start;
+	unsigned long log_end;
+	spinlock_t lock; /* protects log_buff, log_start and log_end */
+	wait_queue_head_t queue_wait;
+};
+
+struct frag_packet_list_entry {
+	struct list_head list;
+	uint16_t seqno;
+	struct sk_buff *skb;
+};
+
+struct vis_info {
+	unsigned long       first_seen;
+	struct list_head    recv_list;
+			    /* list of server-neighbors we received a vis-packet
+			     * from.  we should not reply to them. */
+	struct list_head send_list;
+	struct kref refcount;
+	struct bat_priv *bat_priv;
+	/* this packet might be part of the vis send queue. */
+	struct sk_buff *skb_packet;
+	/* vis_info may follow here*/
+} __attribute__((packed));
+
+struct vis_info_entry {
+	uint8_t  src[ETH_ALEN];
+	uint8_t  dest[ETH_ALEN];
+	uint8_t  quality;	/* quality = 0 means HNA */
+} __attribute__((packed));
+
+struct recvlist_node {
+	struct list_head list;
+	uint8_t mac[ETH_ALEN];
+};
+
+struct softif_neigh {
+	struct hlist_node list;
+	uint8_t addr[ETH_ALEN];
+	unsigned long last_seen;
+	short vid;
+	struct kref refcount;
+	struct rcu_head rcu;
+};
+
+#endif /* _NET_BATMAN_ADV_TYPES_H_ */
diff --git a/net/batman-adv/unicast.c b/net/batman-adv/unicast.c
new file mode 100644
index 00000000000..dc2e28bed84
--- /dev/null
+++ b/net/batman-adv/unicast.c
@@ -0,0 +1,343 @@
+/*
+ * Copyright (C) 2010 B.A.T.M.A.N. contributors:
+ *
+ * Andreas Langer
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "unicast.h"
+#include "send.h"
+#include "soft-interface.h"
+#include "gateway_client.h"
+#include "originator.h"
+#include "hash.h"
+#include "translation-table.h"
+#include "routing.h"
+#include "hard-interface.h"
+
+
+static struct sk_buff *frag_merge_packet(struct list_head *head,
+					 struct frag_packet_list_entry *tfp,
+					 struct sk_buff *skb)
+{
+	struct unicast_frag_packet *up =
+		(struct unicast_frag_packet *)skb->data;
+	struct sk_buff *tmp_skb;
+	struct unicast_packet *unicast_packet;
+	int hdr_len = sizeof(struct unicast_packet),
+	    uni_diff = sizeof(struct unicast_frag_packet) - hdr_len;
+
+	/* set skb to the first part and tmp_skb to the second part */
+	if (up->flags & UNI_FRAG_HEAD) {
+		tmp_skb = tfp->skb;
+	} else {
+		tmp_skb = skb;
+		skb = tfp->skb;
+	}
+
+	skb_pull(tmp_skb, sizeof(struct unicast_frag_packet));
+	if (pskb_expand_head(skb, 0, tmp_skb->len, GFP_ATOMIC) < 0) {
+		/* free buffered skb, skb will be freed later */
+		kfree_skb(tfp->skb);
+		return NULL;
+	}
+
+	/* move free entry to end */
+	tfp->skb = NULL;
+	tfp->seqno = 0;
+	list_move_tail(&tfp->list, head);
+
+	memcpy(skb_put(skb, tmp_skb->len), tmp_skb->data, tmp_skb->len);
+	kfree_skb(tmp_skb);
+
+	memmove(skb->data + uni_diff, skb->data, hdr_len);
+	unicast_packet = (struct unicast_packet *) skb_pull(skb, uni_diff);
+	unicast_packet->packet_type = BAT_UNICAST;
+
+	return skb;
+}
+
+static void frag_create_entry(struct list_head *head, struct sk_buff *skb)
+{
+	struct frag_packet_list_entry *tfp;
+	struct unicast_frag_packet *up =
+		(struct unicast_frag_packet *)skb->data;
+
+	/* free and oldest packets stand at the end */
+	tfp = list_entry((head)->prev, typeof(*tfp), list);
+	kfree_skb(tfp->skb);
+
+	tfp->seqno = ntohs(up->seqno);
+	tfp->skb = skb;
+	list_move(&tfp->list, head);
+	return;
+}
+
+static int frag_create_buffer(struct list_head *head)
+{
+	int i;
+	struct frag_packet_list_entry *tfp;
+
+	for (i = 0; i < FRAG_BUFFER_SIZE; i++) {
+		tfp = kmalloc(sizeof(struct frag_packet_list_entry),
+			GFP_ATOMIC);
+		if (!tfp) {
+			frag_list_free(head);
+			return -ENOMEM;
+		}
+		tfp->skb = NULL;
+		tfp->seqno = 0;
+		INIT_LIST_HEAD(&tfp->list);
+		list_add(&tfp->list, head);
+	}
+
+	return 0;
+}
+
+static struct frag_packet_list_entry *frag_search_packet(struct list_head *head,
+						 struct unicast_frag_packet *up)
+{
+	struct frag_packet_list_entry *tfp;
+	struct unicast_frag_packet *tmp_up = NULL;
+	uint16_t search_seqno;
+
+	if (up->flags & UNI_FRAG_HEAD)
+		search_seqno = ntohs(up->seqno)+1;
+	else
+		search_seqno = ntohs(up->seqno)-1;
+
+	list_for_each_entry(tfp, head, list) {
+
+		if (!tfp->skb)
+			continue;
+
+		if (tfp->seqno == ntohs(up->seqno))
+			goto mov_tail;
+
+		tmp_up = (struct unicast_frag_packet *)tfp->skb->data;
+
+		if (tfp->seqno == search_seqno) {
+
+			if ((tmp_up->flags & UNI_FRAG_HEAD) !=
+			    (up->flags & UNI_FRAG_HEAD))
+				return tfp;
+			else
+				goto mov_tail;
+		}
+	}
+	return NULL;
+
+mov_tail:
+	list_move_tail(&tfp->list, head);
+	return NULL;
+}
+
+void frag_list_free(struct list_head *head)
+{
+	struct frag_packet_list_entry *pf, *tmp_pf;
+
+	if (!list_empty(head)) {
+
+		list_for_each_entry_safe(pf, tmp_pf, head, list) {
+			kfree_skb(pf->skb);
+			list_del(&pf->list);
+			kfree(pf);
+		}
+	}
+	return;
+}
+
+/* frag_reassemble_skb():
+ * returns NET_RX_DROP if the operation failed - skb is left intact
+ * returns NET_RX_SUCCESS if the fragment was buffered (skb_new will be NULL)
+ * or the skb could be reassembled (skb_new will point to the new packet and
+ * skb was freed)
+ */
+int frag_reassemble_skb(struct sk_buff *skb, struct bat_priv *bat_priv,
+			struct sk_buff **new_skb)
+{
+	struct orig_node *orig_node;
+	struct frag_packet_list_entry *tmp_frag_entry;
+	int ret = NET_RX_DROP;
+	struct unicast_frag_packet *unicast_packet =
+		(struct unicast_frag_packet *)skb->data;
+
+	*new_skb = NULL;
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	orig_node = ((struct orig_node *)
+		    hash_find(bat_priv->orig_hash, compare_orig, choose_orig,
+			      unicast_packet->orig));
+
+	if (!orig_node) {
+		pr_debug("couldn't find originator in orig_hash\n");
+		goto out;
+	}
+
+	orig_node->last_frag_packet = jiffies;
+
+	if (list_empty(&orig_node->frag_list) &&
+	    frag_create_buffer(&orig_node->frag_list)) {
+		pr_debug("couldn't create frag buffer\n");
+		goto out;
+	}
+
+	tmp_frag_entry = frag_search_packet(&orig_node->frag_list,
+					    unicast_packet);
+
+	if (!tmp_frag_entry) {
+		frag_create_entry(&orig_node->frag_list, skb);
+		ret = NET_RX_SUCCESS;
+		goto out;
+	}
+
+	*new_skb = frag_merge_packet(&orig_node->frag_list, tmp_frag_entry,
+				     skb);
+	/* if not, merge failed */
+	if (*new_skb)
+		ret = NET_RX_SUCCESS;
+out:
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	return ret;
+}
+
+int frag_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv,
+		  struct batman_if *batman_if, uint8_t dstaddr[])
+{
+	struct unicast_packet tmp_uc, *unicast_packet;
+	struct sk_buff *frag_skb;
+	struct unicast_frag_packet *frag1, *frag2;
+	int uc_hdr_len = sizeof(struct unicast_packet);
+	int ucf_hdr_len = sizeof(struct unicast_frag_packet);
+	int data_len = skb->len;
+
+	if (!bat_priv->primary_if)
+		goto dropped;
+
+	unicast_packet = (struct unicast_packet *) skb->data;
+
+	memcpy(&tmp_uc, unicast_packet, uc_hdr_len);
+	frag_skb = dev_alloc_skb(data_len - (data_len / 2) + ucf_hdr_len);
+	skb_split(skb, frag_skb, data_len / 2);
+
+	if (my_skb_head_push(skb, ucf_hdr_len - uc_hdr_len) < 0 ||
+	    my_skb_head_push(frag_skb, ucf_hdr_len) < 0)
+		goto drop_frag;
+
+	frag1 = (struct unicast_frag_packet *)skb->data;
+	frag2 = (struct unicast_frag_packet *)frag_skb->data;
+
+	memcpy(frag1, &tmp_uc, sizeof(struct unicast_packet));
+
+	frag1->ttl--;
+	frag1->version = COMPAT_VERSION;
+	frag1->packet_type = BAT_UNICAST_FRAG;
+
+	memcpy(frag1->orig, bat_priv->primary_if->net_dev->dev_addr, ETH_ALEN);
+	memcpy(frag2, frag1, sizeof(struct unicast_frag_packet));
+
+	frag1->flags |= UNI_FRAG_HEAD;
+	frag2->flags &= ~UNI_FRAG_HEAD;
+
+	frag1->seqno = htons((uint16_t)atomic_inc_return(
+			     &batman_if->frag_seqno));
+	frag2->seqno = htons((uint16_t)atomic_inc_return(
+			     &batman_if->frag_seqno));
+
+	send_skb_packet(skb, batman_if, dstaddr);
+	send_skb_packet(frag_skb, batman_if, dstaddr);
+	return NET_RX_SUCCESS;
+
+drop_frag:
+	kfree_skb(frag_skb);
+dropped:
+	kfree_skb(skb);
+	return NET_RX_DROP;
+}
+
+int unicast_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv)
+{
+	struct ethhdr *ethhdr = (struct ethhdr *)skb->data;
+	struct unicast_packet *unicast_packet;
+	struct orig_node *orig_node;
+	struct batman_if *batman_if;
+	struct neigh_node *router;
+	int data_len = skb->len;
+	uint8_t dstaddr[6];
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+
+	/* get routing information */
+	if (is_multicast_ether_addr(ethhdr->h_dest))
+		orig_node = (struct orig_node *)gw_get_selected(bat_priv);
+	else
+		orig_node = ((struct orig_node *)hash_find(bat_priv->orig_hash,
+							   compare_orig,
+							   choose_orig,
+							   ethhdr->h_dest));
+
+	/* check for hna host */
+	if (!orig_node)
+		orig_node = transtable_search(bat_priv, ethhdr->h_dest);
+
+	router = find_router(bat_priv, orig_node, NULL);
+
+	if (!router)
+		goto unlock;
+
+	/* don't lock while sending the packets ... we therefore
+		* copy the required data before sending */
+
+	batman_if = router->if_incoming;
+	memcpy(dstaddr, router->addr, ETH_ALEN);
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	if (batman_if->if_status != IF_ACTIVE)
+		goto dropped;
+
+	if (my_skb_head_push(skb, sizeof(struct unicast_packet)) < 0)
+		goto dropped;
+
+	unicast_packet = (struct unicast_packet *)skb->data;
+
+	unicast_packet->version = COMPAT_VERSION;
+	/* batman packet type: unicast */
+	unicast_packet->packet_type = BAT_UNICAST;
+	/* set unicast ttl */
+	unicast_packet->ttl = TTL;
+	/* copy the destination for faster routing */
+	memcpy(unicast_packet->dest, orig_node->orig, ETH_ALEN);
+
+	if (atomic_read(&bat_priv->fragmentation) &&
+	    data_len + sizeof(struct unicast_packet) >
+	    batman_if->net_dev->mtu) {
+		/* send frag skb decreases ttl */
+		unicast_packet->ttl++;
+		return frag_send_skb(skb, bat_priv, batman_if,
+				     dstaddr);
+	}
+	send_skb_packet(skb, batman_if, dstaddr);
+	return 0;
+
+unlock:
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+dropped:
+	kfree_skb(skb);
+	return 1;
+}
diff --git a/net/batman-adv/unicast.h b/net/batman-adv/unicast.h
new file mode 100644
index 00000000000..e32b7867a9a
--- /dev/null
+++ b/net/batman-adv/unicast.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2010 B.A.T.M.A.N. contributors:
+ *
+ * Andreas Langer
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_UNICAST_H_
+#define _NET_BATMAN_ADV_UNICAST_H_
+
+#define FRAG_TIMEOUT 10000	/* purge frag list entrys after time in ms */
+#define FRAG_BUFFER_SIZE 6	/* number of list elements in buffer */
+
+int frag_reassemble_skb(struct sk_buff *skb, struct bat_priv *bat_priv,
+			struct sk_buff **new_skb);
+void frag_list_free(struct list_head *head);
+int unicast_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv);
+int frag_send_skb(struct sk_buff *skb, struct bat_priv *bat_priv,
+		  struct batman_if *batman_if, uint8_t dstaddr[]);
+
+#endif /* _NET_BATMAN_ADV_UNICAST_H_ */
diff --git a/net/batman-adv/vis.c b/net/batman-adv/vis.c
new file mode 100644
index 00000000000..cd4c4231fa4
--- /dev/null
+++ b/net/batman-adv/vis.c
@@ -0,0 +1,949 @@
+/*
+ * Copyright (C) 2008-2010 B.A.T.M.A.N. contributors:
+ *
+ * Simon Wunderlich
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#include "main.h"
+#include "send.h"
+#include "translation-table.h"
+#include "vis.h"
+#include "soft-interface.h"
+#include "hard-interface.h"
+#include "hash.h"
+#include "originator.h"
+
+#define MAX_VIS_PACKET_SIZE 1000
+
+/* Returns the smallest signed integer in two's complement with the sizeof x */
+#define smallest_signed_int(x) (1u << (7u + 8u * (sizeof(x) - 1u)))
+
+/* Checks if a sequence number x is a predecessor/successor of y.
+ * they handle overflows/underflows and can correctly check for a
+ * predecessor/successor unless the variable sequence number has grown by
+ * more then 2**(bitwidth(x)-1)-1.
+ * This means that for a uint8_t with the maximum value 255, it would think:
+ *  - when adding nothing - it is neither a predecessor nor a successor
+ *  - before adding more than 127 to the starting value - it is a predecessor,
+ *  - when adding 128 - it is neither a predecessor nor a successor,
+ *  - after adding more than 127 to the starting value - it is a successor */
+#define seq_before(x, y) ({typeof(x) _dummy = (x - y); \
+			_dummy > smallest_signed_int(_dummy); })
+#define seq_after(x, y) seq_before(y, x)
+
+static void start_vis_timer(struct bat_priv *bat_priv);
+
+/* free the info */
+static void free_info(struct kref *ref)
+{
+	struct vis_info *info = container_of(ref, struct vis_info, refcount);
+	struct bat_priv *bat_priv = info->bat_priv;
+	struct recvlist_node *entry, *tmp;
+
+	list_del_init(&info->send_list);
+	spin_lock_bh(&bat_priv->vis_list_lock);
+	list_for_each_entry_safe(entry, tmp, &info->recv_list, list) {
+		list_del(&entry->list);
+		kfree(entry);
+	}
+
+	spin_unlock_bh(&bat_priv->vis_list_lock);
+	kfree_skb(info->skb_packet);
+}
+
+/* Compare two vis packets, used by the hashing algorithm */
+static int vis_info_cmp(void *data1, void *data2)
+{
+	struct vis_info *d1, *d2;
+	struct vis_packet *p1, *p2;
+	d1 = data1;
+	d2 = data2;
+	p1 = (struct vis_packet *)d1->skb_packet->data;
+	p2 = (struct vis_packet *)d2->skb_packet->data;
+	return compare_orig(p1->vis_orig, p2->vis_orig);
+}
+
+/* hash function to choose an entry in a hash table of given size */
+/* hash algorithm from http://en.wikipedia.org/wiki/Hash_table */
+static int vis_info_choose(void *data, int size)
+{
+	struct vis_info *vis_info = data;
+	struct vis_packet *packet;
+	unsigned char *key;
+	uint32_t hash = 0;
+	size_t i;
+
+	packet = (struct vis_packet *)vis_info->skb_packet->data;
+	key = packet->vis_orig;
+	for (i = 0; i < ETH_ALEN; i++) {
+		hash += key[i];
+		hash += (hash << 10);
+		hash ^= (hash >> 6);
+	}
+
+	hash += (hash << 3);
+	hash ^= (hash >> 11);
+	hash += (hash << 15);
+
+	return hash % size;
+}
+
+/* insert interface to the list of interfaces of one originator, if it
+ * does not already exist in the list */
+static void vis_data_insert_interface(const uint8_t *interface,
+				      struct hlist_head *if_list,
+				      bool primary)
+{
+	struct if_list_entry *entry;
+	struct hlist_node *pos;
+
+	hlist_for_each_entry(entry, pos, if_list, list) {
+		if (compare_orig(entry->addr, (void *)interface))
+			return;
+	}
+
+	/* its a new address, add it to the list */
+	entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
+	if (!entry)
+		return;
+	memcpy(entry->addr, interface, ETH_ALEN);
+	entry->primary = primary;
+	hlist_add_head(&entry->list, if_list);
+}
+
+static ssize_t vis_data_read_prim_sec(char *buff, struct hlist_head *if_list)
+{
+	struct if_list_entry *entry;
+	struct hlist_node *pos;
+	size_t len = 0;
+
+	hlist_for_each_entry(entry, pos, if_list, list) {
+		if (entry->primary)
+			len += sprintf(buff + len, "PRIMARY, ");
+		else
+			len += sprintf(buff + len,  "SEC %pM, ", entry->addr);
+	}
+
+	return len;
+}
+
+static size_t vis_data_count_prim_sec(struct hlist_head *if_list)
+{
+	struct if_list_entry *entry;
+	struct hlist_node *pos;
+	size_t count = 0;
+
+	hlist_for_each_entry(entry, pos, if_list, list) {
+		if (entry->primary)
+			count += 9;
+		else
+			count += 23;
+	}
+
+	return count;
+}
+
+/* read an entry  */
+static ssize_t vis_data_read_entry(char *buff, struct vis_info_entry *entry,
+				   uint8_t *src, bool primary)
+{
+	/* maximal length: max(4+17+2, 3+17+1+3+2) == 26 */
+	if (primary && entry->quality == 0)
+		return sprintf(buff, "HNA %pM, ", entry->dest);
+	else if (compare_orig(entry->src, src))
+		return sprintf(buff, "TQ %pM %d, ", entry->dest,
+			       entry->quality);
+
+	return 0;
+}
+
+int vis_seq_print_text(struct seq_file *seq, void *offset)
+{
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	struct vis_info *info;
+	struct vis_packet *packet;
+	struct vis_info_entry *entries;
+	struct net_device *net_dev = (struct net_device *)seq->private;
+	struct bat_priv *bat_priv = netdev_priv(net_dev);
+	struct hashtable_t *hash = bat_priv->vis_hash;
+	HLIST_HEAD(vis_if_list);
+	struct if_list_entry *entry;
+	struct hlist_node *pos, *n;
+	int i, j;
+	int vis_server = atomic_read(&bat_priv->vis_mode);
+	size_t buff_pos, buf_size;
+	char *buff;
+	int compare;
+
+	if ((!bat_priv->primary_if) ||
+	    (vis_server == VIS_TYPE_CLIENT_UPDATE))
+		return 0;
+
+	buf_size = 1;
+	/* Estimate length */
+	spin_lock_bh(&bat_priv->vis_hash_lock);
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			info = bucket->data;
+			packet = (struct vis_packet *)info->skb_packet->data;
+			entries = (struct vis_info_entry *)
+				((char *)packet + sizeof(struct vis_packet));
+
+			for (j = 0; j < packet->entries; j++) {
+				if (entries[j].quality == 0)
+					continue;
+				compare =
+				 compare_orig(entries[j].src, packet->vis_orig);
+				vis_data_insert_interface(entries[j].src,
+							  &vis_if_list,
+							  compare);
+			}
+
+			hlist_for_each_entry(entry, pos, &vis_if_list, list) {
+				buf_size += 18 + 26 * packet->entries;
+
+				/* add primary/secondary records */
+				if (compare_orig(entry->addr, packet->vis_orig))
+					buf_size +=
+					  vis_data_count_prim_sec(&vis_if_list);
+
+				buf_size += 1;
+			}
+
+			hlist_for_each_entry_safe(entry, pos, n, &vis_if_list,
+						  list) {
+				hlist_del(&entry->list);
+				kfree(entry);
+			}
+		}
+	}
+
+	buff = kmalloc(buf_size, GFP_ATOMIC);
+	if (!buff) {
+		spin_unlock_bh(&bat_priv->vis_hash_lock);
+		return -ENOMEM;
+	}
+	buff[0] = '\0';
+	buff_pos = 0;
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			info = bucket->data;
+			packet = (struct vis_packet *)info->skb_packet->data;
+			entries = (struct vis_info_entry *)
+				((char *)packet + sizeof(struct vis_packet));
+
+			for (j = 0; j < packet->entries; j++) {
+				if (entries[j].quality == 0)
+					continue;
+				compare =
+				 compare_orig(entries[j].src, packet->vis_orig);
+				vis_data_insert_interface(entries[j].src,
+							  &vis_if_list,
+							  compare);
+			}
+
+			hlist_for_each_entry(entry, pos, &vis_if_list, list) {
+				buff_pos += sprintf(buff + buff_pos, "%pM,",
+						entry->addr);
+
+				for (i = 0; i < packet->entries; i++)
+					buff_pos += vis_data_read_entry(
+							buff + buff_pos,
+							&entries[i],
+							entry->addr,
+							entry->primary);
+
+				/* add primary/secondary records */
+				if (compare_orig(entry->addr, packet->vis_orig))
+					buff_pos +=
+					 vis_data_read_prim_sec(buff + buff_pos,
+								&vis_if_list);
+
+				buff_pos += sprintf(buff + buff_pos, "\n");
+			}
+
+			hlist_for_each_entry_safe(entry, pos, n, &vis_if_list,
+						  list) {
+				hlist_del(&entry->list);
+				kfree(entry);
+			}
+		}
+	}
+
+	spin_unlock_bh(&bat_priv->vis_hash_lock);
+
+	seq_printf(seq, "%s", buff);
+	kfree(buff);
+
+	return 0;
+}
+
+/* add the info packet to the send list, if it was not
+ * already linked in. */
+static void send_list_add(struct bat_priv *bat_priv, struct vis_info *info)
+{
+	if (list_empty(&info->send_list)) {
+		kref_get(&info->refcount);
+		list_add_tail(&info->send_list, &bat_priv->vis_send_list);
+	}
+}
+
+/* delete the info packet from the send list, if it was
+ * linked in. */
+static void send_list_del(struct vis_info *info)
+{
+	if (!list_empty(&info->send_list)) {
+		list_del_init(&info->send_list);
+		kref_put(&info->refcount, free_info);
+	}
+}
+
+/* tries to add one entry to the receive list. */
+static void recv_list_add(struct bat_priv *bat_priv,
+			  struct list_head *recv_list, char *mac)
+{
+	struct recvlist_node *entry;
+
+	entry = kmalloc(sizeof(struct recvlist_node), GFP_ATOMIC);
+	if (!entry)
+		return;
+
+	memcpy(entry->mac, mac, ETH_ALEN);
+	spin_lock_bh(&bat_priv->vis_list_lock);
+	list_add_tail(&entry->list, recv_list);
+	spin_unlock_bh(&bat_priv->vis_list_lock);
+}
+
+/* returns 1 if this mac is in the recv_list */
+static int recv_list_is_in(struct bat_priv *bat_priv,
+			   struct list_head *recv_list, char *mac)
+{
+	struct recvlist_node *entry;
+
+	spin_lock_bh(&bat_priv->vis_list_lock);
+	list_for_each_entry(entry, recv_list, list) {
+		if (memcmp(entry->mac, mac, ETH_ALEN) == 0) {
+			spin_unlock_bh(&bat_priv->vis_list_lock);
+			return 1;
+		}
+	}
+	spin_unlock_bh(&bat_priv->vis_list_lock);
+	return 0;
+}
+
+/* try to add the packet to the vis_hash. return NULL if invalid (e.g. too old,
+ * broken.. ).	vis hash must be locked outside.  is_new is set when the packet
+ * is newer than old entries in the hash. */
+static struct vis_info *add_packet(struct bat_priv *bat_priv,
+				   struct vis_packet *vis_packet,
+				   int vis_info_len, int *is_new,
+				   int make_broadcast)
+{
+	struct vis_info *info, *old_info;
+	struct vis_packet *search_packet, *old_packet;
+	struct vis_info search_elem;
+	struct vis_packet *packet;
+	int hash_added;
+
+	*is_new = 0;
+	/* sanity check */
+	if (!bat_priv->vis_hash)
+		return NULL;
+
+	/* see if the packet is already in vis_hash */
+	search_elem.skb_packet = dev_alloc_skb(sizeof(struct vis_packet));
+	if (!search_elem.skb_packet)
+		return NULL;
+	search_packet = (struct vis_packet *)skb_put(search_elem.skb_packet,
+						     sizeof(struct vis_packet));
+
+	memcpy(search_packet->vis_orig, vis_packet->vis_orig, ETH_ALEN);
+	old_info = hash_find(bat_priv->vis_hash, vis_info_cmp, vis_info_choose,
+			     &search_elem);
+	kfree_skb(search_elem.skb_packet);
+
+	if (old_info) {
+		old_packet = (struct vis_packet *)old_info->skb_packet->data;
+		if (!seq_after(ntohl(vis_packet->seqno),
+			       ntohl(old_packet->seqno))) {
+			if (old_packet->seqno == vis_packet->seqno) {
+				recv_list_add(bat_priv, &old_info->recv_list,
+					      vis_packet->sender_orig);
+				return old_info;
+			} else {
+				/* newer packet is already in hash. */
+				return NULL;
+			}
+		}
+		/* remove old entry */
+		hash_remove(bat_priv->vis_hash, vis_info_cmp, vis_info_choose,
+			    old_info);
+		send_list_del(old_info);
+		kref_put(&old_info->refcount, free_info);
+	}
+
+	info = kmalloc(sizeof(struct vis_info), GFP_ATOMIC);
+	if (!info)
+		return NULL;
+
+	info->skb_packet = dev_alloc_skb(sizeof(struct vis_packet) +
+					 vis_info_len + sizeof(struct ethhdr));
+	if (!info->skb_packet) {
+		kfree(info);
+		return NULL;
+	}
+	skb_reserve(info->skb_packet, sizeof(struct ethhdr));
+	packet = (struct vis_packet *)skb_put(info->skb_packet,
+					      sizeof(struct vis_packet) +
+					      vis_info_len);
+
+	kref_init(&info->refcount);
+	INIT_LIST_HEAD(&info->send_list);
+	INIT_LIST_HEAD(&info->recv_list);
+	info->first_seen = jiffies;
+	info->bat_priv = bat_priv;
+	memcpy(packet, vis_packet, sizeof(struct vis_packet) + vis_info_len);
+
+	/* initialize and add new packet. */
+	*is_new = 1;
+
+	/* Make it a broadcast packet, if required */
+	if (make_broadcast)
+		memcpy(packet->target_orig, broadcast_addr, ETH_ALEN);
+
+	/* repair if entries is longer than packet. */
+	if (packet->entries * sizeof(struct vis_info_entry) > vis_info_len)
+		packet->entries = vis_info_len / sizeof(struct vis_info_entry);
+
+	recv_list_add(bat_priv, &info->recv_list, packet->sender_orig);
+
+	/* try to add it */
+	hash_added = hash_add(bat_priv->vis_hash, vis_info_cmp, vis_info_choose,
+			      info);
+	if (hash_added < 0) {
+		/* did not work (for some reason) */
+		kref_put(&old_info->refcount, free_info);
+		info = NULL;
+	}
+
+	return info;
+}
+
+/* handle the server sync packet, forward if needed. */
+void receive_server_sync_packet(struct bat_priv *bat_priv,
+				struct vis_packet *vis_packet,
+				int vis_info_len)
+{
+	struct vis_info *info;
+	int is_new, make_broadcast;
+	int vis_server = atomic_read(&bat_priv->vis_mode);
+
+	make_broadcast = (vis_server == VIS_TYPE_SERVER_SYNC);
+
+	spin_lock_bh(&bat_priv->vis_hash_lock);
+	info = add_packet(bat_priv, vis_packet, vis_info_len,
+			  &is_new, make_broadcast);
+	if (!info)
+		goto end;
+
+	/* only if we are server ourselves and packet is newer than the one in
+	 * hash.*/
+	if (vis_server == VIS_TYPE_SERVER_SYNC && is_new)
+		send_list_add(bat_priv, info);
+end:
+	spin_unlock_bh(&bat_priv->vis_hash_lock);
+}
+
+/* handle an incoming client update packet and schedule forward if needed. */
+void receive_client_update_packet(struct bat_priv *bat_priv,
+				  struct vis_packet *vis_packet,
+				  int vis_info_len)
+{
+	struct vis_info *info;
+	struct vis_packet *packet;
+	int is_new;
+	int vis_server = atomic_read(&bat_priv->vis_mode);
+	int are_target = 0;
+
+	/* clients shall not broadcast. */
+	if (is_broadcast_ether_addr(vis_packet->target_orig))
+		return;
+
+	/* Are we the target for this VIS packet? */
+	if (vis_server == VIS_TYPE_SERVER_SYNC	&&
+	    is_my_mac(vis_packet->target_orig))
+		are_target = 1;
+
+	spin_lock_bh(&bat_priv->vis_hash_lock);
+	info = add_packet(bat_priv, vis_packet, vis_info_len,
+			  &is_new, are_target);
+
+	if (!info)
+		goto end;
+	/* note that outdated packets will be dropped at this point. */
+
+	packet = (struct vis_packet *)info->skb_packet->data;
+
+	/* send only if we're the target server or ... */
+	if (are_target && is_new) {
+		packet->vis_type = VIS_TYPE_SERVER_SYNC;	/* upgrade! */
+		send_list_add(bat_priv, info);
+
+		/* ... we're not the recipient (and thus need to forward). */
+	} else if (!is_my_mac(packet->target_orig)) {
+		send_list_add(bat_priv, info);
+	}
+
+end:
+	spin_unlock_bh(&bat_priv->vis_hash_lock);
+}
+
+/* Walk the originators and find the VIS server with the best tq. Set the packet
+ * address to its address and return the best_tq.
+ *
+ * Must be called with the originator hash locked */
+static int find_best_vis_server(struct bat_priv *bat_priv,
+				struct vis_info *info)
+{
+	struct hashtable_t *hash = bat_priv->orig_hash;
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	struct orig_node *orig_node;
+	struct vis_packet *packet;
+	int best_tq = -1, i;
+
+	packet = (struct vis_packet *)info->skb_packet->data;
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			orig_node = bucket->data;
+			if ((orig_node) && (orig_node->router) &&
+			(orig_node->flags & VIS_SERVER) &&
+			(orig_node->router->tq_avg > best_tq)) {
+				best_tq = orig_node->router->tq_avg;
+				memcpy(packet->target_orig, orig_node->orig,
+				       ETH_ALEN);
+			}
+		}
+	}
+
+	return best_tq;
+}
+
+/* Return true if the vis packet is full. */
+static bool vis_packet_full(struct vis_info *info)
+{
+	struct vis_packet *packet;
+	packet = (struct vis_packet *)info->skb_packet->data;
+
+	if (MAX_VIS_PACKET_SIZE / sizeof(struct vis_info_entry)
+		< packet->entries + 1)
+		return true;
+	return false;
+}
+
+/* generates a packet of own vis data,
+ * returns 0 on success, -1 if no packet could be generated */
+static int generate_vis_packet(struct bat_priv *bat_priv)
+{
+	struct hashtable_t *hash = bat_priv->orig_hash;
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	struct orig_node *orig_node;
+	struct neigh_node *neigh_node;
+	struct vis_info *info = (struct vis_info *)bat_priv->my_vis_info;
+	struct vis_packet *packet = (struct vis_packet *)info->skb_packet->data;
+	struct vis_info_entry *entry;
+	struct hna_local_entry *hna_local_entry;
+	int best_tq = -1, i;
+
+	info->first_seen = jiffies;
+	packet->vis_type = atomic_read(&bat_priv->vis_mode);
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	memcpy(packet->target_orig, broadcast_addr, ETH_ALEN);
+	packet->ttl = TTL;
+	packet->seqno = htonl(ntohl(packet->seqno) + 1);
+	packet->entries = 0;
+	skb_trim(info->skb_packet, sizeof(struct vis_packet));
+
+	if (packet->vis_type == VIS_TYPE_CLIENT_UPDATE) {
+		best_tq = find_best_vis_server(bat_priv, info);
+
+		if (best_tq < 0) {
+			spin_unlock_bh(&bat_priv->orig_hash_lock);
+			return -1;
+		}
+	}
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			orig_node = bucket->data;
+			neigh_node = orig_node->router;
+
+			if (!neigh_node)
+				continue;
+
+			if (!compare_orig(neigh_node->addr, orig_node->orig))
+				continue;
+
+			if (neigh_node->if_incoming->if_status != IF_ACTIVE)
+				continue;
+
+			if (neigh_node->tq_avg < 1)
+				continue;
+
+			/* fill one entry into buffer. */
+			entry = (struct vis_info_entry *)
+				      skb_put(info->skb_packet, sizeof(*entry));
+			memcpy(entry->src,
+			       neigh_node->if_incoming->net_dev->dev_addr,
+			       ETH_ALEN);
+			memcpy(entry->dest, orig_node->orig, ETH_ALEN);
+			entry->quality = neigh_node->tq_avg;
+			packet->entries++;
+
+			if (vis_packet_full(info)) {
+				spin_unlock_bh(&bat_priv->orig_hash_lock);
+				return 0;
+			}
+		}
+	}
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	hash = bat_priv->hna_local_hash;
+
+	spin_lock_bh(&bat_priv->hna_lhash_lock);
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			hna_local_entry = bucket->data;
+			entry = (struct vis_info_entry *)
+					skb_put(info->skb_packet,
+						sizeof(*entry));
+			memset(entry->src, 0, ETH_ALEN);
+			memcpy(entry->dest, hna_local_entry->addr, ETH_ALEN);
+			entry->quality = 0; /* 0 means HNA */
+			packet->entries++;
+
+			if (vis_packet_full(info)) {
+				spin_unlock_bh(&bat_priv->hna_lhash_lock);
+				return 0;
+			}
+		}
+	}
+
+	spin_unlock_bh(&bat_priv->hna_lhash_lock);
+	return 0;
+}
+
+/* free old vis packets. Must be called with this vis_hash_lock
+ * held */
+static void purge_vis_packets(struct bat_priv *bat_priv)
+{
+	int i;
+	struct hashtable_t *hash = bat_priv->vis_hash;
+	struct hlist_node *walk, *safe;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	struct vis_info *info;
+
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry_safe(bucket, walk, safe, head, hlist) {
+			info = bucket->data;
+
+			/* never purge own data. */
+			if (info == bat_priv->my_vis_info)
+				continue;
+
+			if (time_after(jiffies,
+				       info->first_seen + VIS_TIMEOUT * HZ)) {
+				hlist_del(walk);
+				kfree(bucket);
+				send_list_del(info);
+				kref_put(&info->refcount, free_info);
+			}
+		}
+	}
+}
+
+static void broadcast_vis_packet(struct bat_priv *bat_priv,
+				 struct vis_info *info)
+{
+	struct hashtable_t *hash = bat_priv->orig_hash;
+	struct hlist_node *walk;
+	struct hlist_head *head;
+	struct element_t *bucket;
+	struct orig_node *orig_node;
+	struct vis_packet *packet;
+	struct sk_buff *skb;
+	struct batman_if *batman_if;
+	uint8_t dstaddr[ETH_ALEN];
+	int i;
+
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	packet = (struct vis_packet *)info->skb_packet->data;
+
+	/* send to all routers in range. */
+	for (i = 0; i < hash->size; i++) {
+		head = &hash->table[i];
+
+		hlist_for_each_entry(bucket, walk, head, hlist) {
+			orig_node = bucket->data;
+
+			/* if it's a vis server and reachable, send it. */
+			if ((!orig_node) || (!orig_node->router))
+				continue;
+			if (!(orig_node->flags & VIS_SERVER))
+				continue;
+			/* don't send it if we already received the packet from
+			* this node. */
+			if (recv_list_is_in(bat_priv, &info->recv_list,
+					    orig_node->orig))
+				continue;
+
+			memcpy(packet->target_orig, orig_node->orig, ETH_ALEN);
+			batman_if = orig_node->router->if_incoming;
+			memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
+			spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+			skb = skb_clone(info->skb_packet, GFP_ATOMIC);
+			if (skb)
+				send_skb_packet(skb, batman_if, dstaddr);
+
+			spin_lock_bh(&bat_priv->orig_hash_lock);
+		}
+
+	}
+
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+}
+
+static void unicast_vis_packet(struct bat_priv *bat_priv,
+			       struct vis_info *info)
+{
+	struct orig_node *orig_node;
+	struct sk_buff *skb;
+	struct vis_packet *packet;
+	struct batman_if *batman_if;
+	uint8_t dstaddr[ETH_ALEN];
+
+	spin_lock_bh(&bat_priv->orig_hash_lock);
+	packet = (struct vis_packet *)info->skb_packet->data;
+	orig_node = ((struct orig_node *)hash_find(bat_priv->orig_hash,
+						   compare_orig, choose_orig,
+						   packet->target_orig));
+
+	if ((!orig_node) || (!orig_node->router))
+		goto out;
+
+	/* don't lock while sending the packets ... we therefore
+	 * copy the required data before sending */
+	batman_if = orig_node->router->if_incoming;
+	memcpy(dstaddr, orig_node->router->addr, ETH_ALEN);
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+
+	skb = skb_clone(info->skb_packet, GFP_ATOMIC);
+	if (skb)
+		send_skb_packet(skb, batman_if, dstaddr);
+
+	return;
+
+out:
+	spin_unlock_bh(&bat_priv->orig_hash_lock);
+}
+
+/* only send one vis packet. called from send_vis_packets() */
+static void send_vis_packet(struct bat_priv *bat_priv, struct vis_info *info)
+{
+	struct vis_packet *packet;
+
+	packet = (struct vis_packet *)info->skb_packet->data;
+	if (packet->ttl < 2) {
+		pr_debug("Error - can't send vis packet: ttl exceeded\n");
+		return;
+	}
+
+	memcpy(packet->sender_orig, bat_priv->primary_if->net_dev->dev_addr,
+	       ETH_ALEN);
+	packet->ttl--;
+
+	if (is_broadcast_ether_addr(packet->target_orig))
+		broadcast_vis_packet(bat_priv, info);
+	else
+		unicast_vis_packet(bat_priv, info);
+	packet->ttl++; /* restore TTL */
+}
+
+/* called from timer; send (and maybe generate) vis packet. */
+static void send_vis_packets(struct work_struct *work)
+{
+	struct delayed_work *delayed_work =
+		container_of(work, struct delayed_work, work);
+	struct bat_priv *bat_priv =
+		container_of(delayed_work, struct bat_priv, vis_work);
+	struct vis_info *info, *temp;
+
+	spin_lock_bh(&bat_priv->vis_hash_lock);
+	purge_vis_packets(bat_priv);
+
+	if (generate_vis_packet(bat_priv) == 0) {
+		/* schedule if generation was successful */
+		send_list_add(bat_priv, bat_priv->my_vis_info);
+	}
+
+	list_for_each_entry_safe(info, temp, &bat_priv->vis_send_list,
+				 send_list) {
+
+		kref_get(&info->refcount);
+		spin_unlock_bh(&bat_priv->vis_hash_lock);
+
+		if (bat_priv->primary_if)
+			send_vis_packet(bat_priv, info);
+
+		spin_lock_bh(&bat_priv->vis_hash_lock);
+		send_list_del(info);
+		kref_put(&info->refcount, free_info);
+	}
+	spin_unlock_bh(&bat_priv->vis_hash_lock);
+	start_vis_timer(bat_priv);
+}
+
+/* init the vis server. this may only be called when if_list is already
+ * initialized (e.g. bat0 is initialized, interfaces have been added) */
+int vis_init(struct bat_priv *bat_priv)
+{
+	struct vis_packet *packet;
+	int hash_added;
+
+	if (bat_priv->vis_hash)
+		return 1;
+
+	spin_lock_bh(&bat_priv->vis_hash_lock);
+
+	bat_priv->vis_hash = hash_new(256);
+	if (!bat_priv->vis_hash) {
+		pr_err("Can't initialize vis_hash\n");
+		goto err;
+	}
+
+	bat_priv->my_vis_info = kmalloc(MAX_VIS_PACKET_SIZE, GFP_ATOMIC);
+	if (!bat_priv->my_vis_info) {
+		pr_err("Can't initialize vis packet\n");
+		goto err;
+	}
+
+	bat_priv->my_vis_info->skb_packet = dev_alloc_skb(
+						sizeof(struct vis_packet) +
+						MAX_VIS_PACKET_SIZE +
+						sizeof(struct ethhdr));
+	if (!bat_priv->my_vis_info->skb_packet)
+		goto free_info;
+
+	skb_reserve(bat_priv->my_vis_info->skb_packet, sizeof(struct ethhdr));
+	packet = (struct vis_packet *)skb_put(
+					bat_priv->my_vis_info->skb_packet,
+					sizeof(struct vis_packet));
+
+	/* prefill the vis info */
+	bat_priv->my_vis_info->first_seen = jiffies -
+						msecs_to_jiffies(VIS_INTERVAL);
+	INIT_LIST_HEAD(&bat_priv->my_vis_info->recv_list);
+	INIT_LIST_HEAD(&bat_priv->my_vis_info->send_list);
+	kref_init(&bat_priv->my_vis_info->refcount);
+	bat_priv->my_vis_info->bat_priv = bat_priv;
+	packet->version = COMPAT_VERSION;
+	packet->packet_type = BAT_VIS;
+	packet->ttl = TTL;
+	packet->seqno = 0;
+	packet->entries = 0;
+
+	INIT_LIST_HEAD(&bat_priv->vis_send_list);
+
+	hash_added = hash_add(bat_priv->vis_hash, vis_info_cmp, vis_info_choose,
+			      bat_priv->my_vis_info);
+	if (hash_added < 0) {
+		pr_err("Can't add own vis packet into hash\n");
+		/* not in hash, need to remove it manually. */
+		kref_put(&bat_priv->my_vis_info->refcount, free_info);
+		goto err;
+	}
+
+	spin_unlock_bh(&bat_priv->vis_hash_lock);
+	start_vis_timer(bat_priv);
+	return 1;
+
+free_info:
+	kfree(bat_priv->my_vis_info);
+	bat_priv->my_vis_info = NULL;
+err:
+	spin_unlock_bh(&bat_priv->vis_hash_lock);
+	vis_quit(bat_priv);
+	return 0;
+}
+
+/* Decrease the reference count on a hash item info */
+static void free_info_ref(void *data, void *arg)
+{
+	struct vis_info *info = data;
+
+	send_list_del(info);
+	kref_put(&info->refcount, free_info);
+}
+
+/* shutdown vis-server */
+void vis_quit(struct bat_priv *bat_priv)
+{
+	if (!bat_priv->vis_hash)
+		return;
+
+	cancel_delayed_work_sync(&bat_priv->vis_work);
+
+	spin_lock_bh(&bat_priv->vis_hash_lock);
+	/* properly remove, kill timers ... */
+	hash_delete(bat_priv->vis_hash, free_info_ref, NULL);
+	bat_priv->vis_hash = NULL;
+	bat_priv->my_vis_info = NULL;
+	spin_unlock_bh(&bat_priv->vis_hash_lock);
+}
+
+/* schedule packets for (re)transmission */
+static void start_vis_timer(struct bat_priv *bat_priv)
+{
+	INIT_DELAYED_WORK(&bat_priv->vis_work, send_vis_packets);
+	queue_delayed_work(bat_event_workqueue, &bat_priv->vis_work,
+			   msecs_to_jiffies(VIS_INTERVAL));
+}
diff --git a/net/batman-adv/vis.h b/net/batman-adv/vis.h
new file mode 100644
index 00000000000..2c3b33089a9
--- /dev/null
+++ b/net/batman-adv/vis.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2008-2010 B.A.T.M.A.N. contributors:
+ *
+ * Simon Wunderlich, Marek Lindner
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA
+ *
+ */
+
+#ifndef _NET_BATMAN_ADV_VIS_H_
+#define _NET_BATMAN_ADV_VIS_H_
+
+#define VIS_TIMEOUT		200	/* timeout of vis packets in seconds */
+
+int vis_seq_print_text(struct seq_file *seq, void *offset);
+void receive_server_sync_packet(struct bat_priv *bat_priv,
+				struct vis_packet *vis_packet,
+				int vis_info_len);
+void receive_client_update_packet(struct bat_priv *bat_priv,
+				  struct vis_packet *vis_packet,
+				  int vis_info_len);
+int vis_init(struct bat_priv *bat_priv);
+void vis_quit(struct bat_priv *bat_priv);
+
+#endif /* _NET_BATMAN_ADV_VIS_H_ */
diff --git a/net/bluetooth/Makefile b/net/bluetooth/Makefile
index d1e433f7d67..250f954f021 100644
--- a/net/bluetooth/Makefile
+++ b/net/bluetooth/Makefile
@@ -10,4 +10,4 @@ obj-$(CONFIG_BT_BNEP)	+= bnep/
 obj-$(CONFIG_BT_CMTP)	+= cmtp/
 obj-$(CONFIG_BT_HIDP)	+= hidp/
 
-bluetooth-objs := af_bluetooth.o hci_core.o hci_conn.o hci_event.o hci_sock.o hci_sysfs.o lib.o
+bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o hci_sock.o hci_sysfs.o lib.o
diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c
index f10b41fb05a..5868597534e 100644
--- a/net/bluetooth/bnep/core.c
+++ b/net/bluetooth/bnep/core.c
@@ -648,6 +648,7 @@ int bnep_del_connection(struct bnep_conndel_req *req)
 
 static void __bnep_copy_ci(struct bnep_conninfo *ci, struct bnep_session *s)
 {
+	memset(ci, 0, sizeof(*ci));
 	memcpy(ci->dst, s->eh.h_source, ETH_ALEN);
 	strcpy(ci->device, s->dev->name);
 	ci->flags = s->flags;
diff --git a/net/bluetooth/cmtp/core.c b/net/bluetooth/cmtp/core.c
index ec0a1347f93..8e5f292529a 100644
--- a/net/bluetooth/cmtp/core.c
+++ b/net/bluetooth/cmtp/core.c
@@ -78,6 +78,7 @@ static void __cmtp_unlink_session(struct cmtp_session *session)
 
 static void __cmtp_copy_session(struct cmtp_session *session, struct cmtp_conninfo *ci)
 {
+	memset(ci, 0, sizeof(*ci));
 	bacpy(&ci->bdaddr, &session->bdaddr);
 
 	ci->flags = session->flags;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 0b1e460fe44..6b90a419173 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -39,7 +39,7 @@
 #include <net/sock.h>
 
 #include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -66,7 +66,8 @@ void hci_acl_connect(struct hci_conn *conn)
 	bacpy(&cp.bdaddr, &conn->dst);
 	cp.pscan_rep_mode = 0x02;
 
-	if ((ie = hci_inquiry_cache_lookup(hdev, &conn->dst))) {
+	ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
+	if (ie) {
 		if (inquiry_entry_age(ie) <= INQUIRY_ENTRY_AGE_MAX) {
 			cp.pscan_rep_mode = ie->data.pscan_rep_mode;
 			cp.pscan_mode     = ie->data.pscan_mode;
@@ -368,8 +369,10 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
 
 	BT_DBG("%s dst %s", hdev->name, batostr(dst));
 
-	if (!(acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst))) {
-		if (!(acl = hci_conn_add(hdev, ACL_LINK, dst)))
+	acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst);
+	if (!acl) {
+		acl = hci_conn_add(hdev, ACL_LINK, dst);
+		if (!acl)
 			return NULL;
 	}
 
@@ -389,8 +392,10 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
 	if (type == ACL_LINK)
 		return acl;
 
-	if (!(sco = hci_conn_hash_lookup_ba(hdev, type, dst))) {
-		if (!(sco = hci_conn_add(hdev, type, dst))) {
+	sco = hci_conn_hash_lookup_ba(hdev, type, dst);
+	if (!sco) {
+		sco = hci_conn_add(hdev, type, dst);
+		if (!sco) {
 			hci_conn_put(acl);
 			return NULL;
 		}
@@ -647,10 +652,12 @@ int hci_get_conn_list(void __user *arg)
 
 	size = sizeof(req) + req.conn_num * sizeof(*ci);
 
-	if (!(cl = kmalloc(size, GFP_KERNEL)))
+	cl = kmalloc(size, GFP_KERNEL);
+	if (!cl)
 		return -ENOMEM;
 
-	if (!(hdev = hci_dev_get(req.dev_id))) {
+	hdev = hci_dev_get(req.dev_id);
+	if (!hdev) {
 		kfree(cl);
 		return -ENODEV;
 	}
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index bc2a052e518..8b602d881fd 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -44,7 +44,7 @@
 #include <net/sock.h>
 
 #include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -91,9 +91,16 @@ static void hci_notify(struct hci_dev *hdev, int event)
 
 /* ---- HCI requests ---- */
 
-void hci_req_complete(struct hci_dev *hdev, int result)
+void hci_req_complete(struct hci_dev *hdev, __u16 cmd, int result)
 {
-	BT_DBG("%s result 0x%2.2x", hdev->name, result);
+	BT_DBG("%s command 0x%04x result 0x%2.2x", hdev->name, cmd, result);
+
+	/* If the request has set req_last_cmd (typical for multi-HCI
+	 * command requests) check if the completed command matches
+	 * this, and if not just return. Single HCI command requests
+	 * typically leave req_last_cmd as 0 */
+	if (hdev->req_last_cmd && cmd != hdev->req_last_cmd)
+		return;
 
 	if (hdev->req_status == HCI_REQ_PEND) {
 		hdev->req_result = result;
@@ -149,7 +156,7 @@ static int __hci_request(struct hci_dev *hdev, void (*req)(struct hci_dev *hdev,
 		break;
 	}
 
-	hdev->req_status = hdev->req_result = 0;
+	hdev->req_last_cmd = hdev->req_status = hdev->req_result = 0;
 
 	BT_DBG("%s end: err %d", hdev->name, err);
 
@@ -252,6 +259,8 @@ static void hci_init_req(struct hci_dev *hdev, unsigned long opt)
 	/* Connection accept timeout ~20 secs */
 	param = cpu_to_le16(0x7d00);
 	hci_send_cmd(hdev, HCI_OP_WRITE_CA_TIMEOUT, 2, &param);
+
+	hdev->req_last_cmd = HCI_OP_WRITE_CA_TIMEOUT;
 }
 
 static void hci_scan_req(struct hci_dev *hdev, unsigned long opt)
@@ -349,20 +358,23 @@ struct inquiry_entry *hci_inquiry_cache_lookup(struct hci_dev *hdev, bdaddr_t *b
 void hci_inquiry_cache_update(struct hci_dev *hdev, struct inquiry_data *data)
 {
 	struct inquiry_cache *cache = &hdev->inq_cache;
-	struct inquiry_entry *e;
+	struct inquiry_entry *ie;
 
 	BT_DBG("cache %p, %s", cache, batostr(&data->bdaddr));
 
-	if (!(e = hci_inquiry_cache_lookup(hdev, &data->bdaddr))) {
+	ie = hci_inquiry_cache_lookup(hdev, &data->bdaddr);
+	if (!ie) {
 		/* Entry not in the cache. Add new one. */
-		if (!(e = kzalloc(sizeof(struct inquiry_entry), GFP_ATOMIC)))
+		ie = kzalloc(sizeof(struct inquiry_entry), GFP_ATOMIC);
+		if (!ie)
 			return;
-		e->next     = cache->list;
-		cache->list = e;
+
+		ie->next = cache->list;
+		cache->list = ie;
 	}
 
-	memcpy(&e->data, data, sizeof(*data));
-	e->timestamp = jiffies;
+	memcpy(&ie->data, data, sizeof(*data));
+	ie->timestamp = jiffies;
 	cache->timestamp = jiffies;
 }
 
@@ -422,16 +434,20 @@ int hci_inquiry(void __user *arg)
 
 	hci_dev_lock_bh(hdev);
 	if (inquiry_cache_age(hdev) > INQUIRY_CACHE_AGE_MAX ||
-					inquiry_cache_empty(hdev) ||
-					ir.flags & IREQ_CACHE_FLUSH) {
+				inquiry_cache_empty(hdev) ||
+				ir.flags & IREQ_CACHE_FLUSH) {
 		inquiry_cache_flush(hdev);
 		do_inquiry = 1;
 	}
 	hci_dev_unlock_bh(hdev);
 
 	timeo = ir.length * msecs_to_jiffies(2000);
-	if (do_inquiry && (err = hci_request(hdev, hci_inq_req, (unsigned long)&ir, timeo)) < 0)
-		goto done;
+
+	if (do_inquiry) {
+		err = hci_request(hdev, hci_inq_req, (unsigned long)&ir, timeo);
+		if (err < 0)
+			goto done;
+	}
 
 	/* for unlimited number of responses we will use buffer with 255 entries */
 	max_rsp = (ir.num_rsp == 0) ? 255 : ir.num_rsp;
@@ -439,7 +455,8 @@ int hci_inquiry(void __user *arg)
 	/* cache_dump can't sleep. Therefore we allocate temp buffer and then
 	 * copy it to the user space.
 	 */
-	if (!(buf = kmalloc(sizeof(struct inquiry_info) * max_rsp, GFP_KERNEL))) {
+	buf = kmalloc(sizeof(struct inquiry_info) *max_rsp, GFP_KERNEL);
+	if (!buf) {
 		err = -ENOMEM;
 		goto done;
 	}
@@ -611,7 +628,8 @@ int hci_dev_close(__u16 dev)
 	struct hci_dev *hdev;
 	int err;
 
-	if (!(hdev = hci_dev_get(dev)))
+	hdev = hci_dev_get(dev);
+	if (!hdev)
 		return -ENODEV;
 	err = hci_dev_do_close(hdev);
 	hci_dev_put(hdev);
@@ -623,7 +641,8 @@ int hci_dev_reset(__u16 dev)
 	struct hci_dev *hdev;
 	int ret = 0;
 
-	if (!(hdev = hci_dev_get(dev)))
+	hdev = hci_dev_get(dev);
+	if (!hdev)
 		return -ENODEV;
 
 	hci_req_lock(hdev);
@@ -663,7 +682,8 @@ int hci_dev_reset_stat(__u16 dev)
 	struct hci_dev *hdev;
 	int ret = 0;
 
-	if (!(hdev = hci_dev_get(dev)))
+	hdev = hci_dev_get(dev);
+	if (!hdev)
 		return -ENODEV;
 
 	memset(&hdev->stat, 0, sizeof(struct hci_dev_stats));
@@ -682,7 +702,8 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg)
 	if (copy_from_user(&dr, arg, sizeof(dr)))
 		return -EFAULT;
 
-	if (!(hdev = hci_dev_get(dr.dev_id)))
+	hdev = hci_dev_get(dr.dev_id);
+	if (!hdev)
 		return -ENODEV;
 
 	switch (cmd) {
@@ -763,7 +784,8 @@ int hci_get_dev_list(void __user *arg)
 
 	size = sizeof(*dl) + dev_num * sizeof(*dr);
 
-	if (!(dl = kzalloc(size, GFP_KERNEL)))
+	dl = kzalloc(size, GFP_KERNEL);
+	if (!dl)
 		return -ENOMEM;
 
 	dr = dl->dev_req;
@@ -797,7 +819,8 @@ int hci_get_dev_info(void __user *arg)
 	if (copy_from_user(&di, arg, sizeof(di)))
 		return -EFAULT;
 
-	if (!(hdev = hci_dev_get(di.dev_id)))
+	hdev = hci_dev_get(di.dev_id);
+	if (!hdev)
 		return -ENODEV;
 
 	strcpy(di.name, hdev->name);
@@ -905,7 +928,7 @@ int hci_register_dev(struct hci_dev *hdev)
 	hdev->sniff_max_interval = 800;
 	hdev->sniff_min_interval = 80;
 
-	tasklet_init(&hdev->cmd_task, hci_cmd_task,(unsigned long) hdev);
+	tasklet_init(&hdev->cmd_task, hci_cmd_task, (unsigned long) hdev);
 	tasklet_init(&hdev->rx_task, hci_rx_task, (unsigned long) hdev);
 	tasklet_init(&hdev->tx_task, hci_tx_task, (unsigned long) hdev);
 
@@ -946,6 +969,7 @@ int hci_register_dev(struct hci_dev *hdev)
 		}
 	}
 
+	mgmt_index_added(hdev->id);
 	hci_notify(hdev, HCI_DEV_REG);
 
 	return id;
@@ -975,6 +999,7 @@ int hci_unregister_dev(struct hci_dev *hdev)
 	for (i = 0; i < NUM_REASSEMBLY; i++)
 		kfree_skb(hdev->reassembly[i]);
 
+	mgmt_index_removed(hdev->id);
 	hci_notify(hdev, HCI_DEV_UNREG);
 
 	if (hdev->rfkill) {
@@ -1368,7 +1393,8 @@ void hci_send_acl(struct hci_conn *conn, struct sk_buff *skb, __u16 flags)
 	bt_cb(skb)->pkt_type = HCI_ACLDATA_PKT;
 	hci_add_acl_hdr(skb, conn->handle, flags | ACL_START);
 
-	if (!(list = skb_shinfo(skb)->frag_list)) {
+	list = skb_shinfo(skb)->frag_list;
+	if (!list) {
 		/* Non fragmented */
 		BT_DBG("%s nonfrag skb %p len %d", hdev->name, skb, skb->len);
 
@@ -1609,7 +1635,8 @@ static inline void hci_acldata_packet(struct hci_dev *hdev, struct sk_buff *skb)
 		hci_conn_enter_active_mode(conn);
 
 		/* Send to upper protocol */
-		if ((hp = hci_proto[HCI_PROTO_L2CAP]) && hp->recv_acldata) {
+		hp = hci_proto[HCI_PROTO_L2CAP];
+		if (hp && hp->recv_acldata) {
 			hp->recv_acldata(conn, skb, flags);
 			return;
 		}
@@ -1644,7 +1671,8 @@ static inline void hci_scodata_packet(struct hci_dev *hdev, struct sk_buff *skb)
 		register struct hci_proto *hp;
 
 		/* Send to upper protocol */
-		if ((hp = hci_proto[HCI_PROTO_SCO]) && hp->recv_scodata) {
+		hp = hci_proto[HCI_PROTO_SCO];
+		if (hp && hp->recv_scodata) {
 			hp->recv_scodata(conn, skb);
 			return;
 		}
@@ -1727,7 +1755,8 @@ static void hci_cmd_task(unsigned long arg)
 	if (atomic_read(&hdev->cmd_cnt) && (skb = skb_dequeue(&hdev->cmd_q))) {
 		kfree_skb(hdev->sent_cmd);
 
-		if ((hdev->sent_cmd = skb_clone(skb, GFP_ATOMIC))) {
+		hdev->sent_cmd = skb_clone(skb, GFP_ATOMIC);
+		if (hdev->sent_cmd) {
 			atomic_dec(&hdev->cmd_cnt);
 			hci_send_frame(skb);
 			hdev->cmd_last_tx = jiffies;
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index bfef5bae0b3..38100170d38 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -39,7 +39,7 @@
 #include <net/sock.h>
 
 #include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -58,7 +58,7 @@ static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb)
 
 	clear_bit(HCI_INQUIRY, &hdev->flags);
 
-	hci_req_complete(hdev, status);
+	hci_req_complete(hdev, HCI_OP_INQUIRY_CANCEL, status);
 
 	hci_conn_check_pending(hdev);
 }
@@ -174,7 +174,7 @@ static void hci_cc_write_def_link_policy(struct hci_dev *hdev, struct sk_buff *s
 	if (!status)
 		hdev->link_policy = get_unaligned_le16(sent);
 
-	hci_req_complete(hdev, status);
+	hci_req_complete(hdev, HCI_OP_WRITE_DEF_LINK_POLICY, status);
 }
 
 static void hci_cc_reset(struct hci_dev *hdev, struct sk_buff *skb)
@@ -183,7 +183,7 @@ static void hci_cc_reset(struct hci_dev *hdev, struct sk_buff *skb)
 
 	BT_DBG("%s status 0x%x", hdev->name, status);
 
-	hci_req_complete(hdev, status);
+	hci_req_complete(hdev, HCI_OP_RESET, status);
 }
 
 static void hci_cc_write_local_name(struct hci_dev *hdev, struct sk_buff *skb)
@@ -235,7 +235,7 @@ static void hci_cc_write_auth_enable(struct hci_dev *hdev, struct sk_buff *skb)
 			clear_bit(HCI_AUTH, &hdev->flags);
 	}
 
-	hci_req_complete(hdev, status);
+	hci_req_complete(hdev, HCI_OP_WRITE_AUTH_ENABLE, status);
 }
 
 static void hci_cc_write_encrypt_mode(struct hci_dev *hdev, struct sk_buff *skb)
@@ -258,7 +258,7 @@ static void hci_cc_write_encrypt_mode(struct hci_dev *hdev, struct sk_buff *skb)
 			clear_bit(HCI_ENCRYPT, &hdev->flags);
 	}
 
-	hci_req_complete(hdev, status);
+	hci_req_complete(hdev, HCI_OP_WRITE_ENCRYPT_MODE, status);
 }
 
 static void hci_cc_write_scan_enable(struct hci_dev *hdev, struct sk_buff *skb)
@@ -285,7 +285,7 @@ static void hci_cc_write_scan_enable(struct hci_dev *hdev, struct sk_buff *skb)
 			set_bit(HCI_PSCAN, &hdev->flags);
 	}
 
-	hci_req_complete(hdev, status);
+	hci_req_complete(hdev, HCI_OP_WRITE_SCAN_ENABLE, status);
 }
 
 static void hci_cc_read_class_of_dev(struct hci_dev *hdev, struct sk_buff *skb)
@@ -383,7 +383,7 @@ static void hci_cc_host_buffer_size(struct hci_dev *hdev, struct sk_buff *skb)
 
 	BT_DBG("%s status 0x%x", hdev->name, status);
 
-	hci_req_complete(hdev, status);
+	hci_req_complete(hdev, HCI_OP_HOST_BUFFER_SIZE, status);
 }
 
 static void hci_cc_read_ssp_mode(struct hci_dev *hdev, struct sk_buff *skb)
@@ -536,7 +536,16 @@ static void hci_cc_read_bd_addr(struct hci_dev *hdev, struct sk_buff *skb)
 	if (!rp->status)
 		bacpy(&hdev->bdaddr, &rp->bdaddr);
 
-	hci_req_complete(hdev, rp->status);
+	hci_req_complete(hdev, HCI_OP_READ_BD_ADDR, rp->status);
+}
+
+static void hci_cc_write_ca_timeout(struct hci_dev *hdev, struct sk_buff *skb)
+{
+	__u8 status = *((__u8 *) skb->data);
+
+	BT_DBG("%s status 0x%x", hdev->name, status);
+
+	hci_req_complete(hdev, HCI_OP_WRITE_CA_TIMEOUT, status);
 }
 
 static inline void hci_cs_inquiry(struct hci_dev *hdev, __u8 status)
@@ -544,7 +553,7 @@ static inline void hci_cs_inquiry(struct hci_dev *hdev, __u8 status)
 	BT_DBG("%s status 0x%x", hdev->name, status);
 
 	if (status) {
-		hci_req_complete(hdev, status);
+		hci_req_complete(hdev, HCI_OP_INQUIRY, status);
 
 		hci_conn_check_pending(hdev);
 	} else
@@ -677,9 +686,50 @@ static void hci_cs_set_conn_encrypt(struct hci_dev *hdev, __u8 status)
 	hci_dev_unlock(hdev);
 }
 
+static int hci_outgoing_auth_needed(struct hci_dev *hdev,
+						struct hci_conn *conn)
+{
+	if (conn->state != BT_CONFIG || !conn->out)
+		return 0;
+
+	if (conn->sec_level == BT_SECURITY_SDP)
+		return 0;
+
+	/* Only request authentication for SSP connections or non-SSP
+	 * devices with sec_level HIGH */
+	if (!(hdev->ssp_mode > 0 && conn->ssp_mode > 0) &&
+					conn->sec_level != BT_SECURITY_HIGH)
+		return 0;
+
+	return 1;
+}
+
 static void hci_cs_remote_name_req(struct hci_dev *hdev, __u8 status)
 {
+	struct hci_cp_remote_name_req *cp;
+	struct hci_conn *conn;
+
 	BT_DBG("%s status 0x%x", hdev->name, status);
+
+	/* If successful wait for the name req complete event before
+	 * checking for the need to do authentication */
+	if (!status)
+		return;
+
+	cp = hci_sent_cmd_data(hdev, HCI_OP_REMOTE_NAME_REQ);
+	if (!cp)
+		return;
+
+	hci_dev_lock(hdev);
+
+	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->bdaddr);
+	if (conn && hci_outgoing_auth_needed(hdev, conn)) {
+		struct hci_cp_auth_requested cp;
+		cp.handle = __cpu_to_le16(conn->handle);
+		hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED, sizeof(cp), &cp);
+	}
+
+	hci_dev_unlock(hdev);
 }
 
 static void hci_cs_read_remote_features(struct hci_dev *hdev, __u8 status)
@@ -830,7 +880,7 @@ static inline void hci_inquiry_complete_evt(struct hci_dev *hdev, struct sk_buff
 
 	clear_bit(HCI_INQUIRY, &hdev->flags);
 
-	hci_req_complete(hdev, status);
+	hci_req_complete(hdev, HCI_OP_INQUIRY, status);
 
 	hci_conn_check_pending(hdev);
 }
@@ -955,12 +1005,14 @@ static inline void hci_conn_request_evt(struct hci_dev *hdev, struct sk_buff *sk
 
 		hci_dev_lock(hdev);
 
-		if ((ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr)))
+		ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr);
+		if (ie)
 			memcpy(ie->data.dev_class, ev->dev_class, 3);
 
 		conn = hci_conn_hash_lookup_ba(hdev, ev->link_type, &ev->bdaddr);
 		if (!conn) {
-			if (!(conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr))) {
+			conn = hci_conn_add(hdev, ev->link_type, &ev->bdaddr);
+			if (!conn) {
 				BT_ERR("No memory for new connection");
 				hci_dev_unlock(hdev);
 				return;
@@ -1090,9 +1142,23 @@ static inline void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *s
 
 static inline void hci_remote_name_evt(struct hci_dev *hdev, struct sk_buff *skb)
 {
+	struct hci_ev_remote_name *ev = (void *) skb->data;
+	struct hci_conn *conn;
+
 	BT_DBG("%s", hdev->name);
 
 	hci_conn_check_pending(hdev);
+
+	hci_dev_lock(hdev);
+
+	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
+	if (conn && hci_outgoing_auth_needed(hdev, conn)) {
+		struct hci_cp_auth_requested cp;
+		cp.handle = __cpu_to_le16(conn->handle);
+		hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED, sizeof(cp), &cp);
+	}
+
+	hci_dev_unlock(hdev);
 }
 
 static inline void hci_encrypt_change_evt(struct hci_dev *hdev, struct sk_buff *skb)
@@ -1162,27 +1228,39 @@ static inline void hci_remote_features_evt(struct hci_dev *hdev, struct sk_buff
 	hci_dev_lock(hdev);
 
 	conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
-	if (conn) {
-		if (!ev->status)
-			memcpy(conn->features, ev->features, 8);
+	if (!conn)
+		goto unlock;
 
-		if (conn->state == BT_CONFIG) {
-			if (!ev->status && lmp_ssp_capable(hdev) &&
-						lmp_ssp_capable(conn)) {
-				struct hci_cp_read_remote_ext_features cp;
-				cp.handle = ev->handle;
-				cp.page = 0x01;
-				hci_send_cmd(hdev,
-					HCI_OP_READ_REMOTE_EXT_FEATURES,
+	if (!ev->status)
+		memcpy(conn->features, ev->features, 8);
+
+	if (conn->state != BT_CONFIG)
+		goto unlock;
+
+	if (!ev->status && lmp_ssp_capable(hdev) && lmp_ssp_capable(conn)) {
+		struct hci_cp_read_remote_ext_features cp;
+		cp.handle = ev->handle;
+		cp.page = 0x01;
+		hci_send_cmd(hdev, HCI_OP_READ_REMOTE_EXT_FEATURES,
 							sizeof(cp), &cp);
-			} else {
-				conn->state = BT_CONNECTED;
-				hci_proto_connect_cfm(conn, ev->status);
-				hci_conn_put(conn);
-			}
-		}
+		goto unlock;
+	}
+
+	if (!ev->status) {
+		struct hci_cp_remote_name_req cp;
+		memset(&cp, 0, sizeof(cp));
+		bacpy(&cp.bdaddr, &conn->dst);
+		cp.pscan_rep_mode = 0x02;
+		hci_send_cmd(hdev, HCI_OP_REMOTE_NAME_REQ, sizeof(cp), &cp);
+	}
+
+	if (!hci_outgoing_auth_needed(hdev, conn)) {
+		conn->state = BT_CONNECTED;
+		hci_proto_connect_cfm(conn, ev->status);
+		hci_conn_put(conn);
 	}
 
+unlock:
 	hci_dev_unlock(hdev);
 }
 
@@ -1310,6 +1388,10 @@ static inline void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *sk
 		hci_cc_read_bd_addr(hdev, skb);
 		break;
 
+	case HCI_OP_WRITE_CA_TIMEOUT:
+		hci_cc_write_ca_timeout(hdev, skb);
+		break;
+
 	default:
 		BT_DBG("%s opcode 0x%x", hdev->name, opcode);
 		break;
@@ -1443,10 +1525,12 @@ static inline void hci_num_comp_pkts_evt(struct hci_dev *hdev, struct sk_buff *s
 			conn->sent -= count;
 
 			if (conn->type == ACL_LINK) {
-				if ((hdev->acl_cnt += count) > hdev->acl_pkts)
+				hdev->acl_cnt += count;
+				if (hdev->acl_cnt > hdev->acl_pkts)
 					hdev->acl_cnt = hdev->acl_pkts;
 			} else {
-				if ((hdev->sco_cnt += count) > hdev->sco_pkts)
+				hdev->sco_cnt += count;
+				if (hdev->sco_cnt > hdev->sco_pkts)
 					hdev->sco_cnt = hdev->sco_pkts;
 			}
 		}
@@ -1541,7 +1625,8 @@ static inline void hci_clock_offset_evt(struct hci_dev *hdev, struct sk_buff *sk
 	if (conn && !ev->status) {
 		struct inquiry_entry *ie;
 
-		if ((ie = hci_inquiry_cache_lookup(hdev, &conn->dst))) {
+		ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
+		if (ie) {
 			ie->data.clock_offset = ev->clock_offset;
 			ie->timestamp = jiffies;
 		}
@@ -1575,7 +1660,8 @@ static inline void hci_pscan_rep_mode_evt(struct hci_dev *hdev, struct sk_buff *
 
 	hci_dev_lock(hdev);
 
-	if ((ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr))) {
+	ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr);
+	if (ie) {
 		ie->data.pscan_rep_mode = ev->pscan_rep_mode;
 		ie->timestamp = jiffies;
 	}
@@ -1640,32 +1726,37 @@ static inline void hci_remote_ext_features_evt(struct hci_dev *hdev, struct sk_b
 	hci_dev_lock(hdev);
 
 	conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
-	if (conn) {
-		if (!ev->status && ev->page == 0x01) {
-			struct inquiry_entry *ie;
+	if (!conn)
+		goto unlock;
 
-			if ((ie = hci_inquiry_cache_lookup(hdev, &conn->dst)))
-				ie->data.ssp_mode = (ev->features[0] & 0x01);
+	if (!ev->status && ev->page == 0x01) {
+		struct inquiry_entry *ie;
 
-			conn->ssp_mode = (ev->features[0] & 0x01);
-		}
+		ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
+		if (ie)
+			ie->data.ssp_mode = (ev->features[0] & 0x01);
 
-		if (conn->state == BT_CONFIG) {
-			if (!ev->status && hdev->ssp_mode > 0 &&
-					conn->ssp_mode > 0 && conn->out &&
-					conn->sec_level != BT_SECURITY_SDP) {
-				struct hci_cp_auth_requested cp;
-				cp.handle = ev->handle;
-				hci_send_cmd(hdev, HCI_OP_AUTH_REQUESTED,
-							sizeof(cp), &cp);
-			} else {
-				conn->state = BT_CONNECTED;
-				hci_proto_connect_cfm(conn, ev->status);
-				hci_conn_put(conn);
-			}
-		}
+		conn->ssp_mode = (ev->features[0] & 0x01);
 	}
 
+	if (conn->state != BT_CONFIG)
+		goto unlock;
+
+	if (!ev->status) {
+		struct hci_cp_remote_name_req cp;
+		memset(&cp, 0, sizeof(cp));
+		bacpy(&cp.bdaddr, &conn->dst);
+		cp.pscan_rep_mode = 0x02;
+		hci_send_cmd(hdev, HCI_OP_REMOTE_NAME_REQ, sizeof(cp), &cp);
+	}
+
+	if (!hci_outgoing_auth_needed(hdev, conn)) {
+		conn->state = BT_CONNECTED;
+		hci_proto_connect_cfm(conn, ev->status);
+		hci_conn_put(conn);
+	}
+
+unlock:
 	hci_dev_unlock(hdev);
 }
 
@@ -1815,7 +1906,8 @@ static inline void hci_remote_host_features_evt(struct hci_dev *hdev, struct sk_
 
 	hci_dev_lock(hdev);
 
-	if ((ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr)))
+	ie = hci_inquiry_cache_lookup(hdev, &ev->bdaddr);
+	if (ie)
 		ie->data.ssp_mode = (ev->features[0] & 0x01);
 
 	hci_dev_unlock(hdev);
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 83acd164d39..29827c77f6c 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -43,12 +43,14 @@
 #include <net/sock.h>
 
 #include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
+static int enable_mgmt;
+
 /* ----- HCI socket interface ----- */
 
 static inline int hci_test_bit(int nr, void *addr)
@@ -102,6 +104,12 @@ void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb)
 		if (skb->sk == sk)
 			continue;
 
+		if (bt_cb(skb)->channel != hci_pi(sk)->channel)
+			continue;
+
+		if (bt_cb(skb)->channel == HCI_CHANNEL_CONTROL)
+			goto clone;
+
 		/* Apply filter */
 		flt = &hci_pi(sk)->filter;
 
@@ -125,11 +133,14 @@ void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb)
 				continue;
 		}
 
-		if (!(nskb = skb_clone(skb, GFP_ATOMIC)))
+clone:
+		nskb = skb_clone(skb, GFP_ATOMIC);
+		if (!nskb)
 			continue;
 
 		/* Put type byte before the data */
-		memcpy(skb_push(nskb, 1), &bt_cb(nskb)->pkt_type, 1);
+		if (bt_cb(skb)->channel == HCI_CHANNEL_RAW)
+			memcpy(skb_push(nskb, 1), &bt_cb(nskb)->pkt_type, 1);
 
 		if (sock_queue_rcv_skb(sk, nskb))
 			kfree_skb(nskb);
@@ -352,25 +363,39 @@ static int hci_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long a
 
 static int hci_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
 {
-	struct sockaddr_hci *haddr = (struct sockaddr_hci *) addr;
+	struct sockaddr_hci haddr;
 	struct sock *sk = sock->sk;
 	struct hci_dev *hdev = NULL;
-	int err = 0;
+	int len, err = 0;
 
 	BT_DBG("sock %p sk %p", sock, sk);
 
-	if (!haddr || haddr->hci_family != AF_BLUETOOTH)
+	if (!addr)
+		return -EINVAL;
+
+	memset(&haddr, 0, sizeof(haddr));
+	len = min_t(unsigned int, sizeof(haddr), addr_len);
+	memcpy(&haddr, addr, len);
+
+	if (haddr.hci_family != AF_BLUETOOTH)
+		return -EINVAL;
+
+	if (haddr.hci_channel > HCI_CHANNEL_CONTROL)
+		return -EINVAL;
+
+	if (haddr.hci_channel == HCI_CHANNEL_CONTROL && !enable_mgmt)
 		return -EINVAL;
 
 	lock_sock(sk);
 
-	if (hci_pi(sk)->hdev) {
+	if (sk->sk_state == BT_BOUND || hci_pi(sk)->hdev) {
 		err = -EALREADY;
 		goto done;
 	}
 
-	if (haddr->hci_dev != HCI_DEV_NONE) {
-		if (!(hdev = hci_dev_get(haddr->hci_dev))) {
+	if (haddr.hci_dev != HCI_DEV_NONE) {
+		hdev = hci_dev_get(haddr.hci_dev);
+		if (!hdev) {
 			err = -ENODEV;
 			goto done;
 		}
@@ -378,6 +403,7 @@ static int hci_sock_bind(struct socket *sock, struct sockaddr *addr, int addr_le
 		atomic_inc(&hdev->promisc);
 	}
 
+	hci_pi(sk)->channel = haddr.hci_channel;
 	hci_pi(sk)->hdev = hdev;
 	sk->sk_state = BT_BOUND;
 
@@ -457,7 +483,8 @@ static int hci_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 	if (sk->sk_state == BT_CLOSED)
 		return 0;
 
-	if (!(skb = skb_recv_datagram(sk, flags, noblock, &err)))
+	skb = skb_recv_datagram(sk, flags, noblock, &err);
+	if (!skb)
 		return err;
 
 	msg->msg_namelen = 0;
@@ -499,7 +526,19 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 	lock_sock(sk);
 
-	if (!(hdev = hci_pi(sk)->hdev)) {
+	switch (hci_pi(sk)->channel) {
+	case HCI_CHANNEL_RAW:
+		break;
+	case HCI_CHANNEL_CONTROL:
+		err = mgmt_control(sk, msg, len);
+		goto done;
+	default:
+		err = -EINVAL;
+		goto done;
+	}
+
+	hdev = hci_pi(sk)->hdev;
+	if (!hdev) {
 		err = -EBADFD;
 		goto done;
 	}
@@ -509,7 +548,8 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 		goto done;
 	}
 
-	if (!(skb = bt_skb_send_alloc(sk, len, msg->msg_flags & MSG_DONTWAIT, &err)))
+	skb = bt_skb_send_alloc(sk, len, msg->msg_flags & MSG_DONTWAIT, &err);
+	if (!skb)
 		goto done;
 
 	if (memcpy_fromiovec(skb_put(skb, len), msg->msg_iov, len)) {
@@ -826,3 +866,6 @@ void __exit hci_sock_cleanup(void)
 
 	proto_unregister(&hci_sk_proto);
 }
+
+module_param(enable_mgmt, bool, 0644);
+MODULE_PARM_DESC(enable_mgmt, "Enable Management interface");
diff --git a/net/bluetooth/hidp/Kconfig b/net/bluetooth/hidp/Kconfig
index 98fdfa1fbdd..86a91543172 100644
--- a/net/bluetooth/hidp/Kconfig
+++ b/net/bluetooth/hidp/Kconfig
@@ -1,6 +1,6 @@
 config BT_HIDP
 	tristate "HIDP protocol support"
-	depends on BT && BT_L2CAP && INPUT
+	depends on BT && BT_L2CAP && INPUT && HID_SUPPORT
 	select HID
 	help
 	  HIDP (Human Interface Device Protocol) is a transport layer
diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c
index c0ee8b3928e..29544c21f4b 100644
--- a/net/bluetooth/hidp/core.c
+++ b/net/bluetooth/hidp/core.c
@@ -107,6 +107,7 @@ static void __hidp_unlink_session(struct hidp_session *session)
 
 static void __hidp_copy_session(struct hidp_session *session, struct hidp_conninfo *ci)
 {
+	memset(ci, 0, sizeof(*ci));
 	bacpy(&ci->bdaddr, &session->bdaddr);
 
 	ci->flags = session->flags;
@@ -115,7 +116,6 @@ static void __hidp_copy_session(struct hidp_session *session, struct hidp_connin
 	ci->vendor  = 0x0000;
 	ci->product = 0x0000;
 	ci->version = 0x0000;
-	memset(ci->name, 0, 128);
 
 	if (session->input) {
 		ci->vendor  = session->input->id.vendor;
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index daa7a988d9a..c791fcda7b2 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -57,7 +57,7 @@
 
 #define VERSION "2.15"
 
-static int disable_ertm = 0;
+static int disable_ertm;
 
 static u32 l2cap_feat_mask = L2CAP_FEAT_FIXED_CHAN;
 static u8 l2cap_fixed_chan[8] = { 0x02, };
@@ -83,6 +83,18 @@ static struct sk_buff *l2cap_build_cmd(struct l2cap_conn *conn,
 static int l2cap_ertm_data_rcv(struct sock *sk, struct sk_buff *skb);
 
 /* ---- L2CAP timers ---- */
+static void l2cap_sock_set_timer(struct sock *sk, long timeout)
+{
+	BT_DBG("sk %p state %d timeout %ld", sk, sk->sk_state, timeout);
+	sk_reset_timer(sk, &sk->sk_timer, jiffies + timeout);
+}
+
+static void l2cap_sock_clear_timer(struct sock *sk)
+{
+	BT_DBG("sock %p state %d", sk, sk->sk_state);
+	sk_stop_timer(sk, &sk->sk_timer);
+}
+
 static void l2cap_sock_timeout(unsigned long arg)
 {
 	struct sock *sk = (struct sock *) arg;
@@ -92,6 +104,14 @@ static void l2cap_sock_timeout(unsigned long arg)
 
 	bh_lock_sock(sk);
 
+	if (sock_owned_by_user(sk)) {
+		/* sk is owned by user. Try again later */
+		l2cap_sock_set_timer(sk, HZ / 5);
+		bh_unlock_sock(sk);
+		sock_put(sk);
+		return;
+	}
+
 	if (sk->sk_state == BT_CONNECTED || sk->sk_state == BT_CONFIG)
 		reason = ECONNREFUSED;
 	else if (sk->sk_state == BT_CONNECT &&
@@ -108,18 +128,6 @@ static void l2cap_sock_timeout(unsigned long arg)
 	sock_put(sk);
 }
 
-static void l2cap_sock_set_timer(struct sock *sk, long timeout)
-{
-	BT_DBG("sk %p state %d timeout %ld", sk, sk->sk_state, timeout);
-	sk_reset_timer(sk, &sk->sk_timer, jiffies + timeout);
-}
-
-static void l2cap_sock_clear_timer(struct sock *sk)
-{
-	BT_DBG("sock %p state %d", sk, sk->sk_state);
-	sk_stop_timer(sk, &sk->sk_timer);
-}
-
 /* ---- L2CAP channels ---- */
 static struct sock *__l2cap_get_chan_by_dcid(struct l2cap_chan_list *l, u16 cid)
 {
@@ -743,11 +751,13 @@ found:
 /* Find socket with psm and source bdaddr.
  * Returns closest match.
  */
-static struct sock *__l2cap_get_sock_by_psm(int state, __le16 psm, bdaddr_t *src)
+static struct sock *l2cap_get_sock_by_psm(int state, __le16 psm, bdaddr_t *src)
 {
 	struct sock *sk = NULL, *sk1 = NULL;
 	struct hlist_node *node;
 
+	read_lock(&l2cap_sk_list.lock);
+
 	sk_for_each(sk, node, &l2cap_sk_list.head) {
 		if (state && sk->sk_state != state)
 			continue;
@@ -762,20 +772,10 @@ static struct sock *__l2cap_get_sock_by_psm(int state, __le16 psm, bdaddr_t *src
 				sk1 = sk;
 		}
 	}
-	return node ? sk : sk1;
-}
 
-/* Find socket with given address (psm, src).
- * Returns locked socket */
-static inline struct sock *l2cap_get_sock_by_psm(int state, __le16 psm, bdaddr_t *src)
-{
-	struct sock *s;
-	read_lock(&l2cap_sk_list.lock);
-	s = __l2cap_get_sock_by_psm(state, psm, src);
-	if (s)
-		bh_lock_sock(s);
 	read_unlock(&l2cap_sk_list.lock);
-	return s;
+
+	return node ? sk : sk1;
 }
 
 static void l2cap_sock_destruct(struct sock *sk)
@@ -2421,11 +2421,11 @@ static inline int l2cap_get_conf_opt(void **ptr, int *type, int *olen, unsigned
 		break;
 
 	case 2:
-		*val = __le16_to_cpu(*((__le16 *) opt->val));
+		*val = get_unaligned_le16(opt->val);
 		break;
 
 	case 4:
-		*val = __le32_to_cpu(*((__le32 *) opt->val));
+		*val = get_unaligned_le32(opt->val);
 		break;
 
 	default:
@@ -2452,11 +2452,11 @@ static void l2cap_add_conf_opt(void **ptr, u8 type, u8 len, unsigned long val)
 		break;
 
 	case 2:
-		*((__le16 *) opt->val) = cpu_to_le16(val);
+		put_unaligned_le16(val, opt->val);
 		break;
 
 	case 4:
-		*((__le32 *) opt->val) = cpu_to_le32(val);
+		put_unaligned_le32(val, opt->val);
 		break;
 
 	default:
@@ -2926,6 +2926,8 @@ static inline int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hd
 		goto sendresp;
 	}
 
+	bh_lock_sock(parent);
+
 	/* Check if the ACL is secure enough (if not SDP) */
 	if (psm != cpu_to_le16(0x0001) &&
 				!hci_conn_check_link_mode(conn->hcon)) {
@@ -3078,6 +3080,14 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd
 		break;
 
 	default:
+		/* don't delete l2cap channel if sk is owned by user */
+		if (sock_owned_by_user(sk)) {
+			sk->sk_state = BT_DISCONN;
+			l2cap_sock_clear_timer(sk);
+			l2cap_sock_set_timer(sk, HZ / 5);
+			break;
+		}
+
 		l2cap_chan_del(sk, ECONNREFUSED);
 		break;
 	}
@@ -3114,8 +3124,14 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr
 	if (!sk)
 		return -ENOENT;
 
-	if (sk->sk_state == BT_DISCONN)
+	if (sk->sk_state != BT_CONFIG) {
+		struct l2cap_cmd_rej rej;
+
+		rej.reason = cpu_to_le16(0x0002);
+		l2cap_send_cmd(conn, cmd->ident, L2CAP_COMMAND_REJ,
+				sizeof(rej), &rej);
 		goto unlock;
+	}
 
 	/* Reject if config buffer is too small. */
 	len = cmd_len - sizeof(*req);
@@ -3283,6 +3299,15 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_cmd
 
 	sk->sk_shutdown = SHUTDOWN_MASK;
 
+	/* don't delete l2cap channel if sk is owned by user */
+	if (sock_owned_by_user(sk)) {
+		sk->sk_state = BT_DISCONN;
+		l2cap_sock_clear_timer(sk);
+		l2cap_sock_set_timer(sk, HZ / 5);
+		bh_unlock_sock(sk);
+		return 0;
+	}
+
 	l2cap_chan_del(sk, ECONNRESET);
 	bh_unlock_sock(sk);
 
@@ -3305,6 +3330,15 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, struct l2cap_cmd
 	if (!sk)
 		return 0;
 
+	/* don't delete l2cap channel if sk is owned by user */
+	if (sock_owned_by_user(sk)) {
+		sk->sk_state = BT_DISCONN;
+		l2cap_sock_clear_timer(sk);
+		l2cap_sock_set_timer(sk, HZ / 5);
+		bh_unlock_sock(sk);
+		return 0;
+	}
+
 	l2cap_chan_del(sk, 0);
 	bh_unlock_sock(sk);
 
@@ -4134,11 +4168,10 @@ static inline void l2cap_data_channel_rrframe(struct sock *sk, u16 rx_control)
 			__mod_retrans_timer();
 
 		pi->conn_state &= ~L2CAP_CONN_REMOTE_BUSY;
-		if (pi->conn_state & L2CAP_CONN_SREJ_SENT) {
+		if (pi->conn_state & L2CAP_CONN_SREJ_SENT)
 			l2cap_send_ack(pi);
-		} else {
+		else
 			l2cap_ertm_send(sk);
-		}
 	}
 }
 
@@ -4430,6 +4463,8 @@ static inline int l2cap_conless_channel(struct l2cap_conn *conn, __le16 psm, str
 	if (!sk)
 		goto drop;
 
+	bh_lock_sock(sk);
+
 	BT_DBG("sk %p, len %d", sk, skb->len);
 
 	if (sk->sk_state != BT_BOUND && sk->sk_state != BT_CONNECTED)
@@ -4841,8 +4876,10 @@ static int __init l2cap_init(void)
 		return err;
 
 	_busy_wq = create_singlethread_workqueue("l2cap");
-	if (!_busy_wq)
-		goto error;
+	if (!_busy_wq) {
+		proto_unregister(&l2cap_proto);
+		return -ENOMEM;
+	}
 
 	err = bt_sock_register(BTPROTO_L2CAP, &l2cap_sock_family_ops);
 	if (err < 0) {
@@ -4870,6 +4907,7 @@ static int __init l2cap_init(void)
 	return 0;
 
 error:
+	destroy_workqueue(_busy_wq);
 	proto_unregister(&l2cap_proto);
 	return err;
 }
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
new file mode 100644
index 00000000000..f827fd90838
--- /dev/null
+++ b/net/bluetooth/mgmt.c
@@ -0,0 +1,308 @@
+/*
+   BlueZ - Bluetooth protocol stack for Linux
+   Copyright (C) 2010  Nokia Corporation
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License version 2 as
+   published by the Free Software Foundation;
+
+   THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+   FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
+   IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
+   CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
+   WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+   ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+   OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+   ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
+   COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
+   SOFTWARE IS DISCLAIMED.
+*/
+
+/* Bluetooth HCI Management interface */
+
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <net/bluetooth/mgmt.h>
+
+#define MGMT_VERSION	0
+#define MGMT_REVISION	1
+
+static int cmd_status(struct sock *sk, u16 cmd, u8 status)
+{
+	struct sk_buff *skb;
+	struct mgmt_hdr *hdr;
+	struct mgmt_ev_cmd_status *ev;
+
+	BT_DBG("sock %p", sk);
+
+	skb = alloc_skb(sizeof(*hdr) + sizeof(*ev), GFP_ATOMIC);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = (void *) skb_put(skb, sizeof(*hdr));
+
+	hdr->opcode = cpu_to_le16(MGMT_EV_CMD_STATUS);
+	hdr->len = cpu_to_le16(sizeof(*ev));
+
+	ev = (void *) skb_put(skb, sizeof(*ev));
+	ev->status = status;
+	put_unaligned_le16(cmd, &ev->opcode);
+
+	if (sock_queue_rcv_skb(sk, skb) < 0)
+		kfree_skb(skb);
+
+	return 0;
+}
+
+static int read_version(struct sock *sk)
+{
+	struct sk_buff *skb;
+	struct mgmt_hdr *hdr;
+	struct mgmt_ev_cmd_complete *ev;
+	struct mgmt_rp_read_version *rp;
+
+	BT_DBG("sock %p", sk);
+
+	skb = alloc_skb(sizeof(*hdr) + sizeof(*ev) + sizeof(*rp), GFP_ATOMIC);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = (void *) skb_put(skb, sizeof(*hdr));
+	hdr->opcode = cpu_to_le16(MGMT_EV_CMD_COMPLETE);
+	hdr->len = cpu_to_le16(sizeof(*ev) + sizeof(*rp));
+
+	ev = (void *) skb_put(skb, sizeof(*ev));
+	put_unaligned_le16(MGMT_OP_READ_VERSION, &ev->opcode);
+
+	rp = (void *) skb_put(skb, sizeof(*rp));
+	rp->version = MGMT_VERSION;
+	put_unaligned_le16(MGMT_REVISION, &rp->revision);
+
+	if (sock_queue_rcv_skb(sk, skb) < 0)
+		kfree_skb(skb);
+
+	return 0;
+}
+
+static int read_index_list(struct sock *sk)
+{
+	struct sk_buff *skb;
+	struct mgmt_hdr *hdr;
+	struct mgmt_ev_cmd_complete *ev;
+	struct mgmt_rp_read_index_list *rp;
+	struct list_head *p;
+	size_t body_len;
+	u16 count;
+	int i;
+
+	BT_DBG("sock %p", sk);
+
+	read_lock(&hci_dev_list_lock);
+
+	count = 0;
+	list_for_each(p, &hci_dev_list) {
+		count++;
+	}
+
+	body_len = sizeof(*ev) + sizeof(*rp) + (2 * count);
+	skb = alloc_skb(sizeof(*hdr) + body_len, GFP_ATOMIC);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = (void *) skb_put(skb, sizeof(*hdr));
+	hdr->opcode = cpu_to_le16(MGMT_EV_CMD_COMPLETE);
+	hdr->len = cpu_to_le16(body_len);
+
+	ev = (void *) skb_put(skb, sizeof(*ev));
+	put_unaligned_le16(MGMT_OP_READ_INDEX_LIST, &ev->opcode);
+
+	rp = (void *) skb_put(skb, sizeof(*rp) + (2 * count));
+	put_unaligned_le16(count, &rp->num_controllers);
+
+	i = 0;
+	list_for_each(p, &hci_dev_list) {
+		struct hci_dev *d = list_entry(p, struct hci_dev, list);
+		put_unaligned_le16(d->id, &rp->index[i++]);
+		BT_DBG("Added hci%u", d->id);
+	}
+
+	read_unlock(&hci_dev_list_lock);
+
+	if (sock_queue_rcv_skb(sk, skb) < 0)
+		kfree_skb(skb);
+
+	return 0;
+}
+
+static int read_controller_info(struct sock *sk, unsigned char *data, u16 len)
+{
+	struct sk_buff *skb;
+	struct mgmt_hdr *hdr;
+	struct mgmt_ev_cmd_complete *ev;
+	struct mgmt_rp_read_info *rp;
+	struct mgmt_cp_read_info *cp;
+	struct hci_dev *hdev;
+	u16 dev_id;
+
+	BT_DBG("sock %p", sk);
+
+	if (len != 2)
+		return cmd_status(sk, MGMT_OP_READ_INFO, EINVAL);
+
+	skb = alloc_skb(sizeof(*hdr) + sizeof(*ev) + sizeof(*rp), GFP_ATOMIC);
+	if (!skb)
+		return -ENOMEM;
+
+	hdr = (void *) skb_put(skb, sizeof(*hdr));
+	hdr->opcode = cpu_to_le16(MGMT_EV_CMD_COMPLETE);
+	hdr->len = cpu_to_le16(sizeof(*ev) + sizeof(*rp));
+
+	ev = (void *) skb_put(skb, sizeof(*ev));
+	put_unaligned_le16(MGMT_OP_READ_INFO, &ev->opcode);
+
+	rp = (void *) skb_put(skb, sizeof(*rp));
+
+	cp = (void *) data;
+	dev_id = get_unaligned_le16(&cp->index);
+
+	BT_DBG("request for hci%u", dev_id);
+
+	hdev = hci_dev_get(dev_id);
+	if (!hdev) {
+		kfree_skb(skb);
+		return cmd_status(sk, MGMT_OP_READ_INFO, ENODEV);
+	}
+
+	hci_dev_lock_bh(hdev);
+
+	put_unaligned_le16(hdev->id, &rp->index);
+	rp->type = hdev->dev_type;
+
+	rp->powered = test_bit(HCI_UP, &hdev->flags);
+	rp->discoverable = test_bit(HCI_ISCAN, &hdev->flags);
+	rp->pairable = test_bit(HCI_PSCAN, &hdev->flags);
+
+	if (test_bit(HCI_AUTH, &hdev->flags))
+		rp->sec_mode = 3;
+	else if (hdev->ssp_mode > 0)
+		rp->sec_mode = 4;
+	else
+		rp->sec_mode = 2;
+
+	bacpy(&rp->bdaddr, &hdev->bdaddr);
+	memcpy(rp->features, hdev->features, 8);
+	memcpy(rp->dev_class, hdev->dev_class, 3);
+	put_unaligned_le16(hdev->manufacturer, &rp->manufacturer);
+	rp->hci_ver = hdev->hci_ver;
+	put_unaligned_le16(hdev->hci_rev, &rp->hci_rev);
+
+	hci_dev_unlock_bh(hdev);
+	hci_dev_put(hdev);
+
+	if (sock_queue_rcv_skb(sk, skb) < 0)
+		kfree_skb(skb);
+
+	return 0;
+}
+
+int mgmt_control(struct sock *sk, struct msghdr *msg, size_t msglen)
+{
+	unsigned char *buf;
+	struct mgmt_hdr *hdr;
+	u16 opcode, len;
+	int err;
+
+	BT_DBG("got %zu bytes", msglen);
+
+	if (msglen < sizeof(*hdr))
+		return -EINVAL;
+
+	buf = kmalloc(msglen, GFP_ATOMIC);
+	if (!buf)
+		return -ENOMEM;
+
+	if (memcpy_fromiovec(buf, msg->msg_iov, msglen)) {
+		err = -EFAULT;
+		goto done;
+	}
+
+	hdr = (struct mgmt_hdr *) buf;
+	opcode = get_unaligned_le16(&hdr->opcode);
+	len = get_unaligned_le16(&hdr->len);
+
+	if (len != msglen - sizeof(*hdr)) {
+		err = -EINVAL;
+		goto done;
+	}
+
+	switch (opcode) {
+	case MGMT_OP_READ_VERSION:
+		err = read_version(sk);
+		break;
+	case MGMT_OP_READ_INDEX_LIST:
+		err = read_index_list(sk);
+		break;
+	case MGMT_OP_READ_INFO:
+		err = read_controller_info(sk, buf + sizeof(*hdr), len);
+		break;
+	default:
+		BT_DBG("Unknown op %u", opcode);
+		err = cmd_status(sk, opcode, 0x01);
+		break;
+	}
+
+	if (err < 0)
+		goto done;
+
+	err = msglen;
+
+done:
+	kfree(buf);
+	return err;
+}
+
+static int mgmt_event(u16 event, void *data, u16 data_len)
+{
+	struct sk_buff *skb;
+	struct mgmt_hdr *hdr;
+
+	skb = alloc_skb(sizeof(*hdr) + data_len, GFP_ATOMIC);
+	if (!skb)
+		return -ENOMEM;
+
+	bt_cb(skb)->channel = HCI_CHANNEL_CONTROL;
+
+	hdr = (void *) skb_put(skb, sizeof(*hdr));
+	hdr->opcode = cpu_to_le16(event);
+	hdr->len = cpu_to_le16(data_len);
+
+	memcpy(skb_put(skb, data_len), data, data_len);
+
+	hci_send_to_sock(NULL, skb);
+	kfree_skb(skb);
+
+	return 0;
+}
+
+int mgmt_index_added(u16 index)
+{
+	struct mgmt_ev_index_added ev;
+
+	put_unaligned_le16(index, &ev.index);
+
+	return mgmt_event(MGMT_EV_INDEX_ADDED, &ev, sizeof(ev));
+}
+
+int mgmt_index_removed(u16 index)
+{
+	struct mgmt_ev_index_added ev;
+
+	put_unaligned_le16(index, &ev.index);
+
+	return mgmt_event(MGMT_EV_INDEX_REMOVED, &ev, sizeof(ev));
+}
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 39a5d87e33b..ff8aaa73665 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -41,7 +41,7 @@
 #include <linux/slab.h>
 
 #include <net/sock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 #include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
@@ -51,10 +51,10 @@
 
 #define VERSION "1.11"
 
-static int disable_cfc = 0;
+static int disable_cfc;
+static int l2cap_ertm;
 static int channel_mtu = -1;
 static unsigned int l2cap_mtu = RFCOMM_MAX_L2CAP_MTU;
-static int l2cap_ertm = 0;
 
 static struct task_struct *rfcomm_thread;
 
@@ -79,7 +79,10 @@ static void rfcomm_make_uih(struct sk_buff *skb, u8 addr);
 
 static void rfcomm_process_connect(struct rfcomm_session *s);
 
-static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err);
+static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src,
+							bdaddr_t *dst,
+							u8 sec_level,
+							int *err);
 static struct rfcomm_session *rfcomm_session_get(bdaddr_t *src, bdaddr_t *dst);
 static void rfcomm_session_del(struct rfcomm_session *s);
 
@@ -308,6 +311,7 @@ static void rfcomm_dlc_clear_state(struct rfcomm_dlc *d)
 	d->state      = BT_OPEN;
 	d->flags      = 0;
 	d->mscex      = 0;
+	d->sec_level  = BT_SECURITY_LOW;
 	d->mtu        = RFCOMM_DEFAULT_MTU;
 	d->v24_sig    = RFCOMM_V24_RTC | RFCOMM_V24_RTR | RFCOMM_V24_DV;
 
@@ -401,7 +405,7 @@ static int __rfcomm_dlc_open(struct rfcomm_dlc *d, bdaddr_t *src, bdaddr_t *dst,
 
 	s = rfcomm_session_get(src, dst);
 	if (!s) {
-		s = rfcomm_session_create(src, dst, &err);
+		s = rfcomm_session_create(src, dst, d->sec_level, &err);
 		if (!s)
 			return err;
 	}
@@ -679,7 +683,10 @@ static void rfcomm_session_close(struct rfcomm_session *s, int err)
 	rfcomm_session_put(s);
 }
 
-static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst, int *err)
+static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src,
+							bdaddr_t *dst,
+							u8 sec_level,
+							int *err)
 {
 	struct rfcomm_session *s = NULL;
 	struct sockaddr_l2 addr;
@@ -704,6 +711,7 @@ static struct rfcomm_session *rfcomm_session_create(bdaddr_t *src, bdaddr_t *dst
 	sk = sock->sk;
 	lock_sock(sk);
 	l2cap_pi(sk)->imtu = l2cap_mtu;
+	l2cap_pi(sk)->sec_level = sec_level;
 	if (l2cap_ertm)
 		l2cap_pi(sk)->mode = L2CAP_MODE_ERTM;
 	release_sock(sk);
@@ -1894,7 +1902,7 @@ static inline void rfcomm_check_connection(struct rfcomm_session *s)
 
 	BT_DBG("%p state %ld", s, s->state);
 
-	switch(sk->sk_state) {
+	switch (sk->sk_state) {
 	case BT_CONNECTED:
 		s->state = BT_CONNECT;
 
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index aec505f934d..66cc1f0c3df 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -45,7 +45,7 @@
 #include <net/sock.h>
 
 #include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -140,11 +140,13 @@ static struct sock *__rfcomm_get_sock_by_addr(u8 channel, bdaddr_t *src)
 /* Find socket with channel and source bdaddr.
  * Returns closest match.
  */
-static struct sock *__rfcomm_get_sock_by_channel(int state, u8 channel, bdaddr_t *src)
+static struct sock *rfcomm_get_sock_by_channel(int state, u8 channel, bdaddr_t *src)
 {
 	struct sock *sk = NULL, *sk1 = NULL;
 	struct hlist_node *node;
 
+	read_lock(&rfcomm_sk_list.lock);
+
 	sk_for_each(sk, node, &rfcomm_sk_list.head) {
 		if (state && sk->sk_state != state)
 			continue;
@@ -159,19 +161,10 @@ static struct sock *__rfcomm_get_sock_by_channel(int state, u8 channel, bdaddr_t
 				sk1 = sk;
 		}
 	}
-	return node ? sk : sk1;
-}
 
-/* Find socket with given address (channel, src).
- * Returns locked socket */
-static inline struct sock *rfcomm_get_sock_by_channel(int state, u8 channel, bdaddr_t *src)
-{
-	struct sock *s;
-	read_lock(&rfcomm_sk_list.lock);
-	s = __rfcomm_get_sock_by_channel(state, channel, src);
-	if (s) bh_lock_sock(s);
 	read_unlock(&rfcomm_sk_list.lock);
-	return s;
+
+	return node ? sk : sk1;
 }
 
 static void rfcomm_sock_destruct(struct sock *sk)
@@ -895,7 +888,8 @@ static int rfcomm_sock_shutdown(struct socket *sock, int how)
 
 	BT_DBG("sock %p, sk %p", sock, sk);
 
-	if (!sk) return 0;
+	if (!sk)
+		return 0;
 
 	lock_sock(sk);
 	if (!sk->sk_shutdown) {
@@ -945,6 +939,8 @@ int rfcomm_connect_ind(struct rfcomm_session *s, u8 channel, struct rfcomm_dlc *
 	if (!parent)
 		return 0;
 
+	bh_lock_sock(parent);
+
 	/* Check for backlog size */
 	if (sk_acceptq_is_full(parent)) {
 		BT_DBG("backlog full %d", parent->sk_ack_backlog);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index a9b81f5dacd..2575c2db640 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -58,9 +58,9 @@ struct rfcomm_dev {
 
 	bdaddr_t		src;
 	bdaddr_t		dst;
-	u8 			channel;
+	u8			channel;
 
-	uint 			modem_status;
+	uint			modem_status;
 
 	struct rfcomm_dlc	*dlc;
 	struct tty_struct	*tty;
@@ -69,7 +69,7 @@ struct rfcomm_dev {
 
 	struct device		*tty_dev;
 
-	atomic_t 		wmem_alloc;
+	atomic_t		wmem_alloc;
 
 	struct sk_buff_head	pending;
 };
@@ -431,7 +431,8 @@ static int rfcomm_release_dev(void __user *arg)
 
 	BT_DBG("dev_id %d flags 0x%x", req.dev_id, req.flags);
 
-	if (!(dev = rfcomm_dev_get(req.dev_id)))
+	dev = rfcomm_dev_get(req.dev_id);
+	if (!dev)
 		return -ENODEV;
 
 	if (dev->flags != NOCAP_FLAGS && !capable(CAP_NET_ADMIN)) {
@@ -470,7 +471,8 @@ static int rfcomm_get_dev_list(void __user *arg)
 
 	size = sizeof(*dl) + dev_num * sizeof(*di);
 
-	if (!(dl = kmalloc(size, GFP_KERNEL)))
+	dl = kmalloc(size, GFP_KERNEL);
+	if (!dl)
 		return -ENOMEM;
 
 	di = dl->dev_info;
@@ -513,7 +515,8 @@ static int rfcomm_get_dev_info(void __user *arg)
 	if (copy_from_user(&di, arg, sizeof(di)))
 		return -EFAULT;
 
-	if (!(dev = rfcomm_dev_get(di.id)))
+	dev = rfcomm_dev_get(di.id);
+	if (!dev)
 		return -ENODEV;
 
 	di.flags   = dev->flags;
@@ -561,7 +564,8 @@ static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb)
 		return;
 	}
 
-	if (!(tty = dev->tty) || !skb_queue_empty(&dev->pending)) {
+	tty = dev->tty;
+	if (!tty || !skb_queue_empty(&dev->pending)) {
 		skb_queue_tail(&dev->pending, skb);
 		return;
 	}
@@ -796,7 +800,8 @@ static int rfcomm_tty_write(struct tty_struct *tty, const unsigned char *buf, in
 
 		memcpy(skb_put(skb, size), buf + sent, size);
 
-		if ((err = rfcomm_dlc_send(dlc, skb)) < 0) {
+		err = rfcomm_dlc_send(dlc, skb);
+		if (err < 0) {
 			kfree_skb(skb);
 			break;
 		}
@@ -892,7 +897,7 @@ static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 
 	/* Parity on/off and when on, odd/even */
 	if (((old->c_cflag & PARENB) != (new->c_cflag & PARENB)) ||
-			((old->c_cflag & PARODD) != (new->c_cflag & PARODD)) ) {
+			((old->c_cflag & PARODD) != (new->c_cflag & PARODD))) {
 		changes |= RFCOMM_RPN_PM_PARITY;
 		BT_DBG("Parity change detected.");
 	}
@@ -937,11 +942,10 @@ static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
 	/* POSIX does not support 1.5 stop bits and RFCOMM does not
 	 * support 2 stop bits. So a request for 2 stop bits gets
 	 * translated to 1.5 stop bits */
-	if (new->c_cflag & CSTOPB) {
+	if (new->c_cflag & CSTOPB)
 		stop_bits = RFCOMM_RPN_STOP_15;
-	} else {
+	else
 		stop_bits = RFCOMM_RPN_STOP_1;
-	}
 
 	/* Handle number of data bits [5-8] */
 	if ((old->c_cflag & CSIZE) != (new->c_cflag & CSIZE))
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index d0927d1fdad..960c6d1637d 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -44,7 +44,7 @@
 #include <net/sock.h>
 
 #include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -52,7 +52,7 @@
 
 #define VERSION "0.6"
 
-static int disable_esco = 0;
+static int disable_esco;
 
 static const struct proto_ops sco_sock_ops;
 
@@ -138,16 +138,17 @@ static inline struct sock *sco_chan_get(struct sco_conn *conn)
 
 static int sco_conn_del(struct hci_conn *hcon, int err)
 {
-	struct sco_conn *conn;
+	struct sco_conn *conn = hcon->sco_data;
 	struct sock *sk;
 
-	if (!(conn = hcon->sco_data))
+	if (!conn)
 		return 0;
 
 	BT_DBG("hcon %p conn %p, err %d", hcon, conn, err);
 
 	/* Kill socket */
-	if ((sk = sco_chan_get(conn))) {
+	sk = sco_chan_get(conn);
+	if (sk) {
 		bh_lock_sock(sk);
 		sco_sock_clear_timer(sk);
 		sco_chan_del(sk, err);
@@ -185,7 +186,8 @@ static int sco_connect(struct sock *sk)
 
 	BT_DBG("%s -> %s", batostr(src), batostr(dst));
 
-	if (!(hdev = hci_get_route(dst, src)))
+	hdev = hci_get_route(dst, src);
+	if (!hdev)
 		return -EHOSTUNREACH;
 
 	hci_dev_lock_bh(hdev);
@@ -510,7 +512,8 @@ static int sco_sock_connect(struct socket *sock, struct sockaddr *addr, int alen
 	/* Set destination address and psm */
 	bacpy(&bt_sk(sk)->dst, &sa->sco_bdaddr);
 
-	if ((err = sco_connect(sk)))
+	err = sco_connect(sk);
+	if (err)
 		goto done;
 
 	err = bt_sock_wait_state(sk, BT_CONNECTED,
@@ -828,13 +831,14 @@ static void sco_chan_del(struct sock *sk, int err)
 
 static void sco_conn_ready(struct sco_conn *conn)
 {
-	struct sock *parent, *sk;
+	struct sock *parent;
+	struct sock *sk = conn->sk;
 
 	BT_DBG("conn %p", conn);
 
 	sco_conn_lock(conn);
 
-	if ((sk = conn->sk)) {
+	if (sk) {
 		sco_sock_clear_timer(sk);
 		bh_lock_sock(sk);
 		sk->sk_state = BT_CONNECTED;
@@ -882,7 +886,7 @@ static int sco_connect_ind(struct hci_dev *hdev, bdaddr_t *bdaddr, __u8 type)
 	int lm = 0;
 
 	if (type != SCO_LINK && type != ESCO_LINK)
-		return 0;
+		return -EINVAL;
 
 	BT_DBG("hdev %s, bdaddr %s", hdev->name, batostr(bdaddr));
 
@@ -908,7 +912,7 @@ static int sco_connect_cfm(struct hci_conn *hcon, __u8 status)
 	BT_DBG("hcon %p bdaddr %s status %d", hcon, batostr(&hcon->dst), status);
 
 	if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
-		return 0;
+		return -EINVAL;
 
 	if (!status) {
 		struct sco_conn *conn;
@@ -927,7 +931,7 @@ static int sco_disconn_cfm(struct hci_conn *hcon, __u8 reason)
 	BT_DBG("hcon %p reason %d", hcon, reason);
 
 	if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
-		return 0;
+		return -EINVAL;
 
 	sco_conn_del(hcon, bt_err(reason));
 
diff --git a/net/bridge/br.c b/net/bridge/br.c
index c8436fa3134..84bbb82599b 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -22,8 +22,6 @@
 
 #include "br_private.h"
 
-int (*br_should_route_hook)(struct sk_buff *skb);
-
 static const struct stp_proto br_stp_proto = {
 	.rcv	= br_stp_rcv,
 };
@@ -102,8 +100,6 @@ static void __exit br_deinit(void)
 	br_fdb_fini();
 }
 
-EXPORT_SYMBOL(br_should_route_hook);
-
 module_init(br_init)
 module_exit(br_deinit)
 MODULE_LICENSE("GPL");
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 17cb0b63357..556443566e9 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -141,7 +141,7 @@ static int br_change_mtu(struct net_device *dev, int new_mtu)
 
 #ifdef CONFIG_BRIDGE_NETFILTER
 	/* remember the MTU in the rtable for PMTU */
-	br->fake_rtable.dst.metrics[RTAX_MTU - 1] = new_mtu;
+	dst_metric_set(&br->fake_rtable.dst, RTAX_MTU, new_mtu);
 #endif
 
 	return 0;
diff --git a/net/bridge/br_fdb.c b/net/bridge/br_fdb.c
index 90512ccfd3e..2872393b293 100644
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -238,15 +238,18 @@ struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br,
 int br_fdb_test_addr(struct net_device *dev, unsigned char *addr)
 {
 	struct net_bridge_fdb_entry *fdb;
+	struct net_bridge_port *port;
 	int ret;
 
-	if (!br_port_exists(dev))
-		return 0;
-
 	rcu_read_lock();
-	fdb = __br_fdb_get(br_port_get_rcu(dev)->br, addr);
-	ret = fdb && fdb->dst->dev != dev &&
-		fdb->dst->state == BR_STATE_FORWARDING;
+	port = br_port_get_rcu(dev);
+	if (!port)
+		ret = 0;
+	else {
+		fdb = __br_fdb_get(port->br, addr);
+		ret = fdb && fdb->dst->dev != dev &&
+			fdb->dst->state == BR_STATE_FORWARDING;
+	}
 	rcu_read_unlock();
 
 	return ret;
diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c
index cbfe87f0f34..ee64287f129 100644
--- a/net/bridge/br_forward.c
+++ b/net/bridge/br_forward.c
@@ -41,17 +41,13 @@ static inline unsigned packet_length(const struct sk_buff *skb)
 
 int br_dev_queue_push_xmit(struct sk_buff *skb)
 {
-	/* drop mtu oversized packets except gso */
-	if (packet_length(skb) > skb->dev->mtu && !skb_is_gso(skb))
+	/* ip_fragment doesn't copy the MAC header */
+	if (nf_bridge_maybe_copy_header(skb) ||
+	    (packet_length(skb) > skb->dev->mtu && !skb_is_gso(skb))) {
 		kfree_skb(skb);
-	else {
-		/* ip_fragment doesn't copy the MAC header */
-		if (nf_bridge_maybe_copy_header(skb))
-			kfree_skb(skb);
-		else {
-			skb_push(skb, ETH_HLEN);
-			dev_queue_xmit(skb);
-		}
+	} else {
+		skb_push(skb, ETH_HLEN);
+		dev_queue_xmit(skb);
 	}
 
 	return 0;
@@ -223,7 +219,7 @@ static void br_multicast_flood(struct net_bridge_mdb_entry *mdst,
 	struct net_bridge_port_group *p;
 	struct hlist_node *rp;
 
-	rp = rcu_dereference(br->router_list.first);
+	rp = rcu_dereference(hlist_first_rcu(&br->router_list));
 	p = mdst ? rcu_dereference(mdst->ports) : NULL;
 	while (p || rp) {
 		struct net_bridge_port *port, *lport, *rport;
@@ -242,7 +238,7 @@ static void br_multicast_flood(struct net_bridge_mdb_entry *mdst,
 		if ((unsigned long)lport >= (unsigned long)port)
 			p = rcu_dereference(p->next);
 		if ((unsigned long)rport >= (unsigned long)port)
-			rp = rcu_dereference(rp->next);
+			rp = rcu_dereference(hlist_next_rcu(rp));
 	}
 
 	if (!prev)
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 89ad25a7620..d9d1e2bac1d 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -475,11 +475,8 @@ int br_del_if(struct net_bridge *br, struct net_device *dev)
 {
 	struct net_bridge_port *p;
 
-	if (!br_port_exists(dev))
-		return -EINVAL;
-
-	p = br_port_get(dev);
-	if (p->br != br)
+	p = br_port_get_rtnl(dev);
+	if (!p || p->br != br)
 		return -EINVAL;
 
 	del_nbp(p);
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 25207a1f182..6f6d8e1b776 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -21,6 +21,10 @@
 /* Bridge group multicast address 802.1d (pg 51). */
 const u8 br_group_address[ETH_ALEN] = { 0x01, 0x80, 0xc2, 0x00, 0x00, 0x00 };
 
+/* Hook for brouter */
+br_should_route_hook_t __rcu *br_should_route_hook __read_mostly;
+EXPORT_SYMBOL(br_should_route_hook);
+
 static int br_pass_frame_up(struct sk_buff *skb)
 {
 	struct net_device *indev, *brdev = BR_INPUT_SKB_CB(skb)->brdev;
@@ -139,7 +143,7 @@ struct sk_buff *br_handle_frame(struct sk_buff *skb)
 {
 	struct net_bridge_port *p;
 	const unsigned char *dest = eth_hdr(skb)->h_dest;
-	int (*rhook)(struct sk_buff *skb);
+	br_should_route_hook_t *rhook;
 
 	if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
 		return skb;
@@ -173,8 +177,8 @@ forward:
 	switch (p->state) {
 	case BR_STATE_FORWARDING:
 		rhook = rcu_dereference(br_should_route_hook);
-		if (rhook != NULL) {
-			if (rhook(skb))
+		if (rhook) {
+			if ((*rhook)(skb))
 				return skb;
 			dest = eth_hdr(skb)->h_dest;
 		}
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index eb5b256ffc8..f701a21acb3 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -33,6 +33,9 @@
 
 #include "br_private.h"
 
+#define mlock_dereference(X, br) \
+	rcu_dereference_protected(X, lockdep_is_held(&br->multicast_lock))
+
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 static inline int ipv6_is_local_multicast(const struct in6_addr *addr)
 {
@@ -135,7 +138,7 @@ static struct net_bridge_mdb_entry *br_mdb_ip6_get(
 struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
 					struct sk_buff *skb)
 {
-	struct net_bridge_mdb_htable *mdb = br->mdb;
+	struct net_bridge_mdb_htable *mdb = rcu_dereference(br->mdb);
 	struct br_ip ip;
 
 	if (br->multicast_disabled)
@@ -235,7 +238,8 @@ static void br_multicast_group_expired(unsigned long data)
 	if (mp->ports)
 		goto out;
 
-	mdb = br->mdb;
+	mdb = mlock_dereference(br->mdb, br);
+
 	hlist_del_rcu(&mp->hlist[mdb->ver]);
 	mdb->size--;
 
@@ -249,16 +253,20 @@ out:
 static void br_multicast_del_pg(struct net_bridge *br,
 				struct net_bridge_port_group *pg)
 {
-	struct net_bridge_mdb_htable *mdb = br->mdb;
+	struct net_bridge_mdb_htable *mdb;
 	struct net_bridge_mdb_entry *mp;
 	struct net_bridge_port_group *p;
-	struct net_bridge_port_group **pp;
+	struct net_bridge_port_group __rcu **pp;
+
+	mdb = mlock_dereference(br->mdb, br);
 
 	mp = br_mdb_ip_get(mdb, &pg->addr);
 	if (WARN_ON(!mp))
 		return;
 
-	for (pp = &mp->ports; (p = *pp); pp = &p->next) {
+	for (pp = &mp->ports;
+	     (p = mlock_dereference(*pp, br)) != NULL;
+	     pp = &p->next) {
 		if (p != pg)
 			continue;
 
@@ -294,10 +302,10 @@ out:
 	spin_unlock(&br->multicast_lock);
 }
 
-static int br_mdb_rehash(struct net_bridge_mdb_htable **mdbp, int max,
+static int br_mdb_rehash(struct net_bridge_mdb_htable __rcu **mdbp, int max,
 			 int elasticity)
 {
-	struct net_bridge_mdb_htable *old = *mdbp;
+	struct net_bridge_mdb_htable *old = rcu_dereference_protected(*mdbp, 1);
 	struct net_bridge_mdb_htable *mdb;
 	int err;
 
@@ -437,7 +445,7 @@ static struct sk_buff *br_ip6_multicast_alloc_query(struct net_bridge *br,
 	ip6h = ipv6_hdr(skb);
 
 	*(__force __be32 *)ip6h = htonl(0x60000000);
-	ip6h->payload_len = 8 + sizeof(*mldq);
+	ip6h->payload_len = htons(8 + sizeof(*mldq));
 	ip6h->nexthdr = IPPROTO_HOPOPTS;
 	ip6h->hop_limit = 1;
 	ipv6_addr_set(&ip6h->saddr, 0, 0, 0, 0);
@@ -569,7 +577,7 @@ static struct net_bridge_mdb_entry *br_multicast_get_group(
 	struct net_bridge *br, struct net_bridge_port *port,
 	struct br_ip *group, int hash)
 {
-	struct net_bridge_mdb_htable *mdb = br->mdb;
+	struct net_bridge_mdb_htable *mdb;
 	struct net_bridge_mdb_entry *mp;
 	struct hlist_node *p;
 	unsigned count = 0;
@@ -577,6 +585,7 @@ static struct net_bridge_mdb_entry *br_multicast_get_group(
 	int elasticity;
 	int err;
 
+	mdb = rcu_dereference_protected(br->mdb, 1);
 	hlist_for_each_entry(mp, p, &mdb->mhash[hash], hlist[mdb->ver]) {
 		count++;
 		if (unlikely(br_ip_equal(group, &mp->addr)))
@@ -642,13 +651,16 @@ static struct net_bridge_mdb_entry *br_multicast_new_group(
 	struct net_bridge *br, struct net_bridge_port *port,
 	struct br_ip *group)
 {
-	struct net_bridge_mdb_htable *mdb = br->mdb;
+	struct net_bridge_mdb_htable *mdb;
 	struct net_bridge_mdb_entry *mp;
 	int hash;
+	int err;
 
+	mdb = rcu_dereference_protected(br->mdb, 1);
 	if (!mdb) {
-		if (br_mdb_rehash(&br->mdb, BR_HASH_SIZE, 0))
-			return NULL;
+		err = br_mdb_rehash(&br->mdb, BR_HASH_SIZE, 0);
+		if (err)
+			return ERR_PTR(err);
 		goto rehash;
 	}
 
@@ -660,7 +672,7 @@ static struct net_bridge_mdb_entry *br_multicast_new_group(
 
 	case -EAGAIN:
 rehash:
-		mdb = br->mdb;
+		mdb = rcu_dereference_protected(br->mdb, 1);
 		hash = br_ip_hash(mdb, group);
 		break;
 
@@ -670,7 +682,7 @@ rehash:
 
 	mp = kzalloc(sizeof(*mp), GFP_ATOMIC);
 	if (unlikely(!mp))
-		goto out;
+		return ERR_PTR(-ENOMEM);
 
 	mp->br = br;
 	mp->addr = *group;
@@ -692,7 +704,7 @@ static int br_multicast_add_group(struct net_bridge *br,
 {
 	struct net_bridge_mdb_entry *mp;
 	struct net_bridge_port_group *p;
-	struct net_bridge_port_group **pp;
+	struct net_bridge_port_group __rcu **pp;
 	unsigned long now = jiffies;
 	int err;
 
@@ -703,7 +715,7 @@ static int br_multicast_add_group(struct net_bridge *br,
 
 	mp = br_multicast_new_group(br, port, group);
 	err = PTR_ERR(mp);
-	if (unlikely(IS_ERR(mp) || !mp))
+	if (IS_ERR(mp))
 		goto err;
 
 	if (!port) {
@@ -712,7 +724,9 @@ static int br_multicast_add_group(struct net_bridge *br,
 		goto out;
 	}
 
-	for (pp = &mp->ports; (p = *pp); pp = &p->next) {
+	for (pp = &mp->ports;
+	     (p = mlock_dereference(*pp, br)) != NULL;
+	     pp = &p->next) {
 		if (p->port == port)
 			goto found;
 		if ((unsigned long)p->port < (unsigned long)port)
@@ -1106,7 +1120,7 @@ static int br_ip4_multicast_query(struct net_bridge *br,
 	struct net_bridge_mdb_entry *mp;
 	struct igmpv3_query *ih3;
 	struct net_bridge_port_group *p;
-	struct net_bridge_port_group **pp;
+	struct net_bridge_port_group __rcu **pp;
 	unsigned long max_delay;
 	unsigned long now = jiffies;
 	__be32 group;
@@ -1145,7 +1159,7 @@ static int br_ip4_multicast_query(struct net_bridge *br,
 	if (!group)
 		goto out;
 
-	mp = br_mdb_ip4_get(br->mdb, group);
+	mp = br_mdb_ip4_get(mlock_dereference(br->mdb, br), group);
 	if (!mp)
 		goto out;
 
@@ -1157,7 +1171,9 @@ static int br_ip4_multicast_query(struct net_bridge *br,
 	     try_to_del_timer_sync(&mp->timer) >= 0))
 		mod_timer(&mp->timer, now + max_delay);
 
-	for (pp = &mp->ports; (p = *pp); pp = &p->next) {
+	for (pp = &mp->ports;
+	     (p = mlock_dereference(*pp, br)) != NULL;
+	     pp = &p->next) {
 		if (timer_pending(&p->timer) ?
 		    time_after(p->timer.expires, now + max_delay) :
 		    try_to_del_timer_sync(&p->timer) >= 0)
@@ -1178,7 +1194,8 @@ static int br_ip6_multicast_query(struct net_bridge *br,
 	struct mld_msg *mld = (struct mld_msg *) icmp6_hdr(skb);
 	struct net_bridge_mdb_entry *mp;
 	struct mld2_query *mld2q;
-	struct net_bridge_port_group *p, **pp;
+	struct net_bridge_port_group *p;
+	struct net_bridge_port_group __rcu **pp;
 	unsigned long max_delay;
 	unsigned long now = jiffies;
 	struct in6_addr *group = NULL;
@@ -1214,7 +1231,7 @@ static int br_ip6_multicast_query(struct net_bridge *br,
 	if (!group)
 		goto out;
 
-	mp = br_mdb_ip6_get(br->mdb, group);
+	mp = br_mdb_ip6_get(mlock_dereference(br->mdb, br), group);
 	if (!mp)
 		goto out;
 
@@ -1225,7 +1242,9 @@ static int br_ip6_multicast_query(struct net_bridge *br,
 	     try_to_del_timer_sync(&mp->timer) >= 0))
 		mod_timer(&mp->timer, now + max_delay);
 
-	for (pp = &mp->ports; (p = *pp); pp = &p->next) {
+	for (pp = &mp->ports;
+	     (p = mlock_dereference(*pp, br)) != NULL;
+	     pp = &p->next) {
 		if (timer_pending(&p->timer) ?
 		    time_after(p->timer.expires, now + max_delay) :
 		    try_to_del_timer_sync(&p->timer) >= 0)
@@ -1254,7 +1273,7 @@ static void br_multicast_leave_group(struct net_bridge *br,
 	    timer_pending(&br->multicast_querier_timer))
 		goto out;
 
-	mdb = br->mdb;
+	mdb = mlock_dereference(br->mdb, br);
 	mp = br_mdb_ip_get(mdb, group);
 	if (!mp)
 		goto out;
@@ -1277,7 +1296,9 @@ static void br_multicast_leave_group(struct net_bridge *br,
 		goto out;
 	}
 
-	for (p = mp->ports; p; p = p->next) {
+	for (p = mlock_dereference(mp->ports, br);
+	     p != NULL;
+	     p = mlock_dereference(p->next, br)) {
 		if (p->port != port)
 			continue;
 
@@ -1430,7 +1451,7 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 				 struct net_bridge_port *port,
 				 struct sk_buff *skb)
 {
-	struct sk_buff *skb2 = skb;
+	struct sk_buff *skb2;
 	struct ipv6hdr *ip6h;
 	struct icmp6hdr *icmp6h;
 	u8 nexthdr;
@@ -1469,15 +1490,15 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 	if (!skb2)
 		return -ENOMEM;
 
+	err = -EINVAL;
+	if (!pskb_may_pull(skb2, offset + sizeof(struct icmp6hdr)))
+		goto out;
+
 	len -= offset - skb_network_offset(skb2);
 
 	__skb_pull(skb2, offset);
 	skb_reset_transport_header(skb2);
 
-	err = -EINVAL;
-	if (!pskb_may_pull(skb2, sizeof(*icmp6h)))
-		goto out;
-
 	icmp6h = icmp6_hdr(skb2);
 
 	switch (icmp6h->icmp6_type) {
@@ -1516,7 +1537,12 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 	switch (icmp6h->icmp6_type) {
 	case ICMPV6_MGM_REPORT:
 	    {
-		struct mld_msg *mld = (struct mld_msg *)icmp6h;
+		struct mld_msg *mld;
+		if (!pskb_may_pull(skb2, sizeof(*mld))) {
+			err = -EINVAL;
+			goto out;
+		}
+		mld = (struct mld_msg *)skb_transport_header(skb2);
 		BR_INPUT_SKB_CB(skb2)->mrouters_only = 1;
 		err = br_ip6_multicast_add_group(br, port, &mld->mld_mca);
 		break;
@@ -1529,15 +1555,18 @@ static int br_multicast_ipv6_rcv(struct net_bridge *br,
 		break;
 	case ICMPV6_MGM_REDUCTION:
 	    {
-		struct mld_msg *mld = (struct mld_msg *)icmp6h;
+		struct mld_msg *mld;
+		if (!pskb_may_pull(skb2, sizeof(*mld))) {
+			err = -EINVAL;
+			goto out;
+		}
+		mld = (struct mld_msg *)skb_transport_header(skb2);
 		br_ip6_multicast_leave_group(br, port, &mld->mld_mca);
 	    }
 	}
 
 out:
-	__skb_push(skb2, offset);
-	if (skb2 != skb)
-		kfree_skb(skb2);
+	kfree_skb(skb2);
 	return err;
 }
 #endif
@@ -1625,7 +1654,7 @@ void br_multicast_stop(struct net_bridge *br)
 	del_timer_sync(&br->multicast_query_timer);
 
 	spin_lock_bh(&br->multicast_lock);
-	mdb = br->mdb;
+	mdb = mlock_dereference(br->mdb, br);
 	if (!mdb)
 		goto out;
 
@@ -1729,6 +1758,7 @@ int br_multicast_toggle(struct net_bridge *br, unsigned long val)
 {
 	struct net_bridge_port *port;
 	int err = 0;
+	struct net_bridge_mdb_htable *mdb;
 
 	spin_lock(&br->multicast_lock);
 	if (br->multicast_disabled == !val)
@@ -1741,15 +1771,16 @@ int br_multicast_toggle(struct net_bridge *br, unsigned long val)
 	if (!netif_running(br->dev))
 		goto unlock;
 
-	if (br->mdb) {
-		if (br->mdb->old) {
+	mdb = mlock_dereference(br->mdb, br);
+	if (mdb) {
+		if (mdb->old) {
 			err = -EEXIST;
 rollback:
 			br->multicast_disabled = !!val;
 			goto unlock;
 		}
 
-		err = br_mdb_rehash(&br->mdb, br->mdb->max,
+		err = br_mdb_rehash(&br->mdb, mdb->max,
 				    br->hash_elasticity);
 		if (err)
 			goto rollback;
@@ -1774,6 +1805,7 @@ int br_multicast_set_hash_max(struct net_bridge *br, unsigned long val)
 {
 	int err = -ENOENT;
 	u32 old;
+	struct net_bridge_mdb_htable *mdb;
 
 	spin_lock(&br->multicast_lock);
 	if (!netif_running(br->dev))
@@ -1782,7 +1814,9 @@ int br_multicast_set_hash_max(struct net_bridge *br, unsigned long val)
 	err = -EINVAL;
 	if (!is_power_of_2(val))
 		goto unlock;
-	if (br->mdb && val < br->mdb->size)
+
+	mdb = mlock_dereference(br->mdb, br);
+	if (mdb && val < mdb->size)
 		goto unlock;
 
 	err = 0;
@@ -1790,8 +1824,8 @@ int br_multicast_set_hash_max(struct net_bridge *br, unsigned long val)
 	old = br->hash_max;
 	br->hash_max = val;
 
-	if (br->mdb) {
-		if (br->mdb->old) {
+	if (mdb) {
+		if (mdb->old) {
 			err = -EEXIST;
 rollback:
 			br->hash_max = old;
diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 865fd7634b6..4b5b66d07bb 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -124,24 +124,25 @@ void br_netfilter_rtable_init(struct net_bridge *br)
 	atomic_set(&rt->dst.__refcnt, 1);
 	rt->dst.dev = br->dev;
 	rt->dst.path = &rt->dst;
-	rt->dst.metrics[RTAX_MTU - 1] = 1500;
+	dst_metric_set(&rt->dst, RTAX_MTU, 1500);
 	rt->dst.flags	= DST_NOXFRM;
 	rt->dst.ops = &fake_dst_ops;
 }
 
 static inline struct rtable *bridge_parent_rtable(const struct net_device *dev)
 {
-	if (!br_port_exists(dev))
-		return NULL;
-	return &br_port_get_rcu(dev)->br->fake_rtable;
+	struct net_bridge_port *port;
+
+	port = br_port_get_rcu(dev);
+	return port ? &port->br->fake_rtable : NULL;
 }
 
 static inline struct net_device *bridge_parent(const struct net_device *dev)
 {
-	if (!br_port_exists(dev))
-		return NULL;
+	struct net_bridge_port *port;
 
-	return br_port_get_rcu(dev)->br->dev;
+	port = br_port_get_rcu(dev);
+	return port ? port->br->dev : NULL;
 }
 
 static inline struct nf_bridge_info *nf_bridge_alloc(struct sk_buff *skb)
@@ -412,13 +413,8 @@ static int br_nf_pre_routing_finish(struct sk_buff *skb)
 	if (dnat_took_place(skb)) {
 		if ((err = ip_route_input(skb, iph->daddr, iph->saddr, iph->tos, dev))) {
 			struct flowi fl = {
-				.nl_u = {
-					.ip4_u = {
-						 .daddr = iph->daddr,
-						 .saddr = 0,
-						 .tos = RT_TOS(iph->tos) },
-				},
-				.proto = 0,
+				.fl4_dst = iph->daddr,
+				.fl4_tos = RT_TOS(iph->tos),
 			};
 			struct in_device *in_dev = __in_dev_get_rcu(dev);
 
@@ -566,26 +562,26 @@ static unsigned int br_nf_pre_routing_ipv6(unsigned int hook,
 	u32 pkt_len;
 
 	if (skb->len < sizeof(struct ipv6hdr))
-		goto inhdr_error;
+		return NF_DROP;
 
 	if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
-		goto inhdr_error;
+		return NF_DROP;
 
 	hdr = ipv6_hdr(skb);
 
 	if (hdr->version != 6)
-		goto inhdr_error;
+		return NF_DROP;
 
 	pkt_len = ntohs(hdr->payload_len);
 
 	if (pkt_len || hdr->nexthdr != NEXTHDR_HOP) {
 		if (pkt_len + sizeof(struct ipv6hdr) > skb->len)
-			goto inhdr_error;
+			return NF_DROP;
 		if (pskb_trim_rcsum(skb, pkt_len + sizeof(struct ipv6hdr)))
-			goto inhdr_error;
+			return NF_DROP;
 	}
 	if (hdr->nexthdr == NEXTHDR_HOP && check_hbh_len(skb))
-		goto inhdr_error;
+		return NF_DROP;
 
 	nf_bridge_put(skb->nf_bridge);
 	if (!nf_bridge_alloc(skb))
@@ -598,9 +594,6 @@ static unsigned int br_nf_pre_routing_ipv6(unsigned int hook,
 		br_nf_pre_routing_finish_ipv6);
 
 	return NF_STOLEN;
-
-inhdr_error:
-	return NF_DROP;
 }
 
 /* Direct IPv6 traffic to br_nf_pre_routing_ipv6.
@@ -619,11 +612,11 @@ static unsigned int br_nf_pre_routing(unsigned int hook, struct sk_buff *skb,
 	__u32 len = nf_bridge_encap_header_len(skb);
 
 	if (unlikely(!pskb_may_pull(skb, len)))
-		goto out;
+		return NF_DROP;
 
 	p = br_port_get_rcu(in);
 	if (p == NULL)
-		goto out;
+		return NF_DROP;
 	br = p->br;
 
 	if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
@@ -645,8 +638,7 @@ static unsigned int br_nf_pre_routing(unsigned int hook, struct sk_buff *skb,
 	nf_bridge_pull_encap_header_rcsum(skb);
 
 	if (br_parse_ip_options(skb))
-		/* Drop invalid packet */
-		goto out;
+		return NF_DROP;
 
 	nf_bridge_put(skb->nf_bridge);
 	if (!nf_bridge_alloc(skb))
@@ -660,9 +652,6 @@ static unsigned int br_nf_pre_routing(unsigned int hook, struct sk_buff *skb,
 		br_nf_pre_routing_finish);
 
 	return NF_STOLEN;
-
-out:
-	return NF_DROP;
 }
 
 
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index 4a6a378c84e..f8bf4c7f842 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -119,11 +119,13 @@ static int br_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
 
 	idx = 0;
 	for_each_netdev(net, dev) {
+		struct net_bridge_port *port = br_port_get_rtnl(dev);
+
 		/* not a bridge port */
-		if (!br_port_exists(dev) || idx < cb->args[0])
+		if (!port || idx < cb->args[0])
 			goto skip;
 
-		if (br_fill_ifinfo(skb, br_port_get(dev),
+		if (br_fill_ifinfo(skb, port,
 				   NETLINK_CB(cb->skb).pid,
 				   cb->nlh->nlmsg_seq, RTM_NEWLINK,
 				   NLM_F_MULTI) < 0)
@@ -169,9 +171,9 @@ static int br_rtm_setlink(struct sk_buff *skb,  struct nlmsghdr *nlh, void *arg)
 	if (!dev)
 		return -ENODEV;
 
-	if (!br_port_exists(dev))
+	p = br_port_get_rtnl(dev);
+	if (!p)
 		return -EINVAL;
-	p = br_port_get(dev);
 
 	/* if kernel STP is running, don't allow changes */
 	if (p->br->stp_enabled == BR_KERNEL_STP)
diff --git a/net/bridge/br_notify.c b/net/bridge/br_notify.c
index 404d4e14c6a..7d337c9b608 100644
--- a/net/bridge/br_notify.c
+++ b/net/bridge/br_notify.c
@@ -32,15 +32,15 @@ struct notifier_block br_device_notifier = {
 static int br_device_event(struct notifier_block *unused, unsigned long event, void *ptr)
 {
 	struct net_device *dev = ptr;
-	struct net_bridge_port *p = br_port_get(dev);
+	struct net_bridge_port *p;
 	struct net_bridge *br;
 	int err;
 
 	/* not a port of a bridge */
-	if (!br_port_exists(dev))
+	p = br_port_get_rtnl(dev);
+	if (!p)
 		return NOTIFY_DONE;
 
-	p = br_port_get(dev);
 	br = p->br;
 
 	switch (event) {
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 75c90edaf7d..84aac7734bf 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -72,7 +72,7 @@ struct net_bridge_fdb_entry
 
 struct net_bridge_port_group {
 	struct net_bridge_port		*port;
-	struct net_bridge_port_group	*next;
+	struct net_bridge_port_group __rcu *next;
 	struct hlist_node		mglist;
 	struct rcu_head			rcu;
 	struct timer_list		timer;
@@ -86,7 +86,7 @@ struct net_bridge_mdb_entry
 	struct hlist_node		hlist[2];
 	struct hlist_node		mglist;
 	struct net_bridge		*br;
-	struct net_bridge_port_group	*ports;
+	struct net_bridge_port_group __rcu *ports;
 	struct rcu_head			rcu;
 	struct timer_list		timer;
 	struct timer_list		query_timer;
@@ -151,11 +151,20 @@ struct net_bridge_port
 #endif
 };
 
-#define br_port_get_rcu(dev) \
-	((struct net_bridge_port *) rcu_dereference(dev->rx_handler_data))
-#define br_port_get(dev) ((struct net_bridge_port *) dev->rx_handler_data)
 #define br_port_exists(dev) (dev->priv_flags & IFF_BRIDGE_PORT)
 
+static inline struct net_bridge_port *br_port_get_rcu(const struct net_device *dev)
+{
+	struct net_bridge_port *port = rcu_dereference(dev->rx_handler_data);
+	return br_port_exists(dev) ? port : NULL;
+}
+
+static inline struct net_bridge_port *br_port_get_rtnl(struct net_device *dev)
+{
+	return br_port_exists(dev) ?
+		rtnl_dereference(dev->rx_handler_data) : NULL;
+}
+
 struct br_cpu_netstats {
 	u64			rx_packets;
 	u64			rx_bytes;
@@ -227,7 +236,7 @@ struct net_bridge
 	unsigned long			multicast_startup_query_interval;
 
 	spinlock_t			multicast_lock;
-	struct net_bridge_mdb_htable	*mdb;
+	struct net_bridge_mdb_htable __rcu *mdb;
 	struct hlist_head		router_list;
 	struct hlist_head		mglist;
 
diff --git a/net/bridge/br_stp_bpdu.c b/net/bridge/br_stp_bpdu.c
index 35cf27087b5..289646ec9b7 100644
--- a/net/bridge/br_stp_bpdu.c
+++ b/net/bridge/br_stp_bpdu.c
@@ -50,6 +50,8 @@ static void br_send_bpdu(struct net_bridge_port *p,
 
 	llc_mac_hdr_init(skb, p->dev->dev_addr, p->br->group_addr);
 
+	skb_reset_mac_header(skb);
+
 	NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
 		dev_queue_xmit);
 }
@@ -141,10 +143,6 @@ void br_stp_rcv(const struct stp_proto *proto, struct sk_buff *skb,
 	struct net_bridge *br;
 	const unsigned char *buf;
 
-	if (!br_port_exists(dev))
-		goto err;
-	p = br_port_get_rcu(dev);
-
 	if (!pskb_may_pull(skb, 4))
 		goto err;
 
@@ -153,6 +151,10 @@ void br_stp_rcv(const struct stp_proto *proto, struct sk_buff *skb,
 	if (buf[0] != 0 || buf[1] != 0 || buf[2] != 0)
 		goto err;
 
+	p = br_port_get_rcu(dev);
+	if (!p)
+		goto err;
+
 	br = p->br;
 	spin_lock(&br->lock);
 
diff --git a/net/bridge/br_stp_if.c b/net/bridge/br_stp_if.c
index 1d8826914cb..79372d4a405 100644
--- a/net/bridge/br_stp_if.c
+++ b/net/bridge/br_stp_if.c
@@ -145,7 +145,7 @@ static void br_stp_stop(struct net_bridge *br)
 	char *envp[] = { NULL };
 
 	if (br->stp_enabled == BR_USER_STP) {
-		r = call_usermodehelper(BR_STP_PROG, argv, envp, 1);
+		r = call_usermodehelper(BR_STP_PROG, argv, envp, UMH_WAIT_PROC);
 		br_info(br, "userspace STP stopped, return code %d\n", r);
 
 		/* To start timers on any ports left in blocking */
diff --git a/net/bridge/netfilter/ebt_ip6.c b/net/bridge/netfilter/ebt_ip6.c
index 50a46afc2bc..2ed0056a39a 100644
--- a/net/bridge/netfilter/ebt_ip6.c
+++ b/net/bridge/netfilter/ebt_ip6.c
@@ -22,9 +22,15 @@
 #include <linux/netfilter_bridge/ebtables.h>
 #include <linux/netfilter_bridge/ebt_ip6.h>
 
-struct tcpudphdr {
-	__be16 src;
-	__be16 dst;
+union pkthdr {
+	struct {
+		__be16 src;
+		__be16 dst;
+	} tcpudphdr;
+	struct {
+		u8 type;
+		u8 code;
+	} icmphdr;
 };
 
 static bool
@@ -33,8 +39,8 @@ ebt_ip6_mt(const struct sk_buff *skb, struct xt_action_param *par)
 	const struct ebt_ip6_info *info = par->matchinfo;
 	const struct ipv6hdr *ih6;
 	struct ipv6hdr _ip6h;
-	const struct tcpudphdr *pptr;
-	struct tcpudphdr _ports;
+	const union pkthdr *pptr;
+	union pkthdr _pkthdr;
 
 	ih6 = skb_header_pointer(skb, 0, sizeof(_ip6h), &_ip6h);
 	if (ih6 == NULL)
@@ -56,26 +62,34 @@ ebt_ip6_mt(const struct sk_buff *skb, struct xt_action_param *par)
 			return false;
 		if (FWINV(info->protocol != nexthdr, EBT_IP6_PROTO))
 			return false;
-		if (!(info->bitmask & EBT_IP6_DPORT) &&
-		    !(info->bitmask & EBT_IP6_SPORT))
+		if (!(info->bitmask & ( EBT_IP6_DPORT |
+					EBT_IP6_SPORT | EBT_IP6_ICMP6)))
 			return true;
-		pptr = skb_header_pointer(skb, offset_ph, sizeof(_ports),
-					  &_ports);
+
+		/* min icmpv6 headersize is 4, so sizeof(_pkthdr) is ok. */
+		pptr = skb_header_pointer(skb, offset_ph, sizeof(_pkthdr),
+					  &_pkthdr);
 		if (pptr == NULL)
 			return false;
 		if (info->bitmask & EBT_IP6_DPORT) {
-			u32 dst = ntohs(pptr->dst);
+			u16 dst = ntohs(pptr->tcpudphdr.dst);
 			if (FWINV(dst < info->dport[0] ||
 				  dst > info->dport[1], EBT_IP6_DPORT))
 				return false;
 		}
 		if (info->bitmask & EBT_IP6_SPORT) {
-			u32 src = ntohs(pptr->src);
+			u16 src = ntohs(pptr->tcpudphdr.src);
 			if (FWINV(src < info->sport[0] ||
 				  src > info->sport[1], EBT_IP6_SPORT))
 			return false;
 		}
-		return true;
+		if ((info->bitmask & EBT_IP6_ICMP6) &&
+		     FWINV(pptr->icmphdr.type < info->icmpv6_type[0] ||
+			   pptr->icmphdr.type > info->icmpv6_type[1] ||
+			   pptr->icmphdr.code < info->icmpv6_code[0] ||
+			   pptr->icmphdr.code > info->icmpv6_code[1],
+							EBT_IP6_ICMP6))
+			return false;
 	}
 	return true;
 }
@@ -103,6 +117,14 @@ static int ebt_ip6_mt_check(const struct xt_mtchk_param *par)
 		return -EINVAL;
 	if (info->bitmask & EBT_IP6_SPORT && info->sport[0] > info->sport[1])
 		return -EINVAL;
+	if (info->bitmask & EBT_IP6_ICMP6) {
+		if ((info->invflags & EBT_IP6_PROTO) ||
+		     info->protocol != IPPROTO_ICMPV6)
+			return -EINVAL;
+		if (info->icmpv6_type[0] > info->icmpv6_type[1] ||
+		    info->icmpv6_code[0] > info->icmpv6_code[1])
+			return -EINVAL;
+	}
 	return 0;
 }
 
diff --git a/net/bridge/netfilter/ebtable_broute.c b/net/bridge/netfilter/ebtable_broute.c
index ae3f106c390..1bcaf36ad61 100644
--- a/net/bridge/netfilter/ebtable_broute.c
+++ b/net/bridge/netfilter/ebtable_broute.c
@@ -87,7 +87,8 @@ static int __init ebtable_broute_init(void)
 	if (ret < 0)
 		return ret;
 	/* see br_input.c */
-	rcu_assign_pointer(br_should_route_hook, ebt_broute);
+	rcu_assign_pointer(br_should_route_hook,
+			   (br_should_route_hook_t *)ebt_broute);
 	return 0;
 }
 
diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index a1dcf83f0d5..5f1825df9dc 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -128,6 +128,7 @@ ebt_basic_match(const struct ebt_entry *e, const struct sk_buff *skb,
                 const struct net_device *in, const struct net_device *out)
 {
 	const struct ethhdr *h = eth_hdr(skb);
+	const struct net_bridge_port *p;
 	__be16 ethproto;
 	int verdict, i;
 
@@ -148,13 +149,11 @@ ebt_basic_match(const struct ebt_entry *e, const struct sk_buff *skb,
 	if (FWINV2(ebt_dev_check(e->out, out), EBT_IOUT))
 		return 1;
 	/* rcu_read_lock()ed by nf_hook_slow */
-	if (in && br_port_exists(in) &&
-	    FWINV2(ebt_dev_check(e->logical_in, br_port_get_rcu(in)->br->dev),
-		   EBT_ILOGICALIN))
+	if (in && (p = br_port_get_rcu(in)) != NULL &&
+	    FWINV2(ebt_dev_check(e->logical_in, p->br->dev), EBT_ILOGICALIN))
 		return 1;
-	if (out && br_port_exists(out) &&
-	    FWINV2(ebt_dev_check(e->logical_out, br_port_get_rcu(out)->br->dev),
-		   EBT_ILOGICALOUT))
+	if (out && (p = br_port_get_rcu(out)) != NULL &&
+	    FWINV2(ebt_dev_check(e->logical_out, p->br->dev), EBT_ILOGICALOUT))
 		return 1;
 
 	if (e->bitmask & EBT_SOURCEMAC) {
@@ -1148,7 +1147,7 @@ ebt_register_table(struct net *net, const struct ebt_table *input_table)
 	void *p;
 
 	if (input_table == NULL || (repl = input_table->table) == NULL ||
-	    repl->entries == 0 || repl->entries_size == 0 ||
+	    repl->entries == NULL || repl->entries_size == 0 ||
 	    repl->counters != NULL || input_table->private != NULL) {
 		BUGPRINT("Bad table data for ebt_register_table!!!\n");
 		return ERR_PTR(-EINVAL);
@@ -1765,6 +1764,7 @@ static int compat_table_info(const struct ebt_table_info *info,
 
 	newinfo->entries_size = size;
 
+	xt_compat_init_offsets(AF_INET, info->nentries);
 	return EBT_ENTRY_ITERATE(entries, size, compat_calc_entry, info,
 							entries, newinfo);
 }
diff --git a/net/caif/Makefile b/net/caif/Makefile
index f87481fb0e6..9d38e406e4a 100644
--- a/net/caif/Makefile
+++ b/net/caif/Makefile
@@ -1,8 +1,6 @@
-ifeq ($(CONFIG_CAIF_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_CAIF_DEBUG)     :=      -DDEBUG
 
-caif-objs := caif_dev.o \
+caif-y := caif_dev.o \
 	cfcnfg.o cfmuxl.o cfctrl.o  \
 	cffrml.o cfveil.o cfdbgl.o\
 	cfserl.o cfdgml.o  \
@@ -13,4 +11,4 @@ obj-$(CONFIG_CAIF) += caif.o
 obj-$(CONFIG_CAIF_NETDEV) += chnl_net.o
 obj-$(CONFIG_CAIF) += caif_socket.o
 
-export-objs := caif.o
+export-y := caif.o
diff --git a/net/can/Makefile b/net/can/Makefile
index 9cd3c4b3abd..2d3894b3274 100644
--- a/net/can/Makefile
+++ b/net/can/Makefile
@@ -3,10 +3,10 @@
 #
 
 obj-$(CONFIG_CAN)	+= can.o
-can-objs		:= af_can.o proc.o
+can-y			:= af_can.o proc.o
 
 obj-$(CONFIG_CAN_RAW)	+= can-raw.o
-can-raw-objs		:= raw.o
+can-raw-y		:= raw.o
 
 obj-$(CONFIG_CAN_BCM)	+= can-bcm.o
-can-bcm-objs		:= bcm.o
+can-bcm-y		:= bcm.o
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 08ffe9e4be2..9d5e8accfab 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -125,7 +125,7 @@ struct bcm_sock {
 	struct list_head tx_ops;
 	unsigned long dropped_usr_msgs;
 	struct proc_dir_entry *bcm_proc_read;
-	char procname [9]; /* pointer printed in ASCII with \0 */
+	char procname [32]; /* inode number in decimal with \0 */
 };
 
 static inline struct bcm_sock *bcm_sk(const struct sock *sk)
@@ -1521,7 +1521,7 @@ static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len,
 
 	if (proc_dir) {
 		/* unique socket address as filename */
-		sprintf(bo->procname, "%p", sock);
+		sprintf(bo->procname, "%lu", sock_i_ino(sk));
 		bo->bcm_proc_read = proc_create_data(bo->procname, 0644,
 						     proc_dir,
 						     &bcm_proc_fops, sk);
diff --git a/net/ceph/Makefile b/net/ceph/Makefile
index aab1cabb803..e87ef435e11 100644
--- a/net/ceph/Makefile
+++ b/net/ceph/Makefile
@@ -1,12 +1,9 @@
 #
 # Makefile for CEPH filesystem.
 #
-
-ifneq ($(KERNELRELEASE),)
-
 obj-$(CONFIG_CEPH_LIB) += libceph.o
 
-libceph-objs := ceph_common.o messenger.o msgpool.o buffer.o pagelist.o \
+libceph-y := ceph_common.o messenger.o msgpool.o buffer.o pagelist.o \
 	mon_client.o \
 	osd_client.o osdmap.o crush/crush.o crush/mapper.o crush/hash.o \
 	debugfs.o \
@@ -16,22 +13,3 @@ libceph-objs := ceph_common.o messenger.o msgpool.o buffer.o pagelist.o \
 	ceph_fs.o ceph_strings.o ceph_hash.o \
 	pagevec.o
 
-else
-#Otherwise we were called directly from the command
-# line; invoke the kernel build system.
-
-KERNELDIR ?= /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-
-default: all
-
-all:
-	$(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_LIB=m modules
-
-modules_install:
-	$(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_LIB=m modules_install
-
-clean:
-	$(MAKE) -C $(KERNELDIR) M=$(PWD) clean
-
-endif
diff --git a/net/ceph/buffer.c b/net/ceph/buffer.c
index 53d8abfa25d..bf3e6a13c21 100644
--- a/net/ceph/buffer.c
+++ b/net/ceph/buffer.c
@@ -19,7 +19,7 @@ struct ceph_buffer *ceph_buffer_new(size_t len, gfp_t gfp)
 	if (b->vec.iov_base) {
 		b->is_vmalloc = false;
 	} else {
-		b->vec.iov_base = __vmalloc(len, gfp, PAGE_KERNEL);
+		b->vec.iov_base = __vmalloc(len, gfp | __GFP_HIGHMEM, PAGE_KERNEL);
 		if (!b->vec.iov_base) {
 			kfree(b);
 			return NULL;
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 0e8157ee5d4..b6ff4a1519a 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -97,11 +97,9 @@ struct workqueue_struct *ceph_msgr_wq;
 int ceph_msgr_init(void)
 {
 	ceph_msgr_wq = create_workqueue("ceph-msgr");
-	if (IS_ERR(ceph_msgr_wq)) {
-		int ret = PTR_ERR(ceph_msgr_wq);
-		pr_err("msgr_init failed to create workqueue: %d\n", ret);
-		ceph_msgr_wq = NULL;
-		return ret;
+	if (!ceph_msgr_wq) {
+		pr_err("msgr_init failed to create workqueue\n");
+		return -ENOMEM;
 	}
 	return 0;
 }
@@ -540,8 +538,7 @@ static void prepare_write_message(struct ceph_connection *con)
 		/* initialize page iterator */
 		con->out_msg_pos.page = 0;
 		if (m->pages)
-			con->out_msg_pos.page_pos =
-				le16_to_cpu(m->hdr.data_off) & ~PAGE_MASK;
+			con->out_msg_pos.page_pos = m->page_alignment;
 		else
 			con->out_msg_pos.page_pos = 0;
 		con->out_msg_pos.data_pos = 0;
@@ -1491,7 +1488,7 @@ static int read_partial_message(struct ceph_connection *con)
 	struct ceph_msg *m = con->in_msg;
 	int ret;
 	int to, left;
-	unsigned front_len, middle_len, data_len, data_off;
+	unsigned front_len, middle_len, data_len;
 	int datacrc = con->msgr->nocrc;
 	int skip;
 	u64 seq;
@@ -1527,19 +1524,17 @@ static int read_partial_message(struct ceph_connection *con)
 	data_len = le32_to_cpu(con->in_hdr.data_len);
 	if (data_len > CEPH_MSG_MAX_DATA_LEN)
 		return -EIO;
-	data_off = le16_to_cpu(con->in_hdr.data_off);
 
 	/* verify seq# */
 	seq = le64_to_cpu(con->in_hdr.seq);
 	if ((s64)seq - (s64)con->in_seq < 1) {
-		pr_info("skipping %s%lld %s seq %lld, expected %lld\n",
+		pr_info("skipping %s%lld %s seq %lld expected %lld\n",
 			ENTITY_NAME(con->peer_name),
 			ceph_pr_addr(&con->peer_addr.in_addr),
 			seq, con->in_seq + 1);
 		con->in_base_pos = -front_len - middle_len - data_len -
 			sizeof(m->footer);
 		con->in_tag = CEPH_MSGR_TAG_READY;
-		con->in_seq++;
 		return 0;
 	} else if ((s64)seq - (s64)con->in_seq > 1) {
 		pr_err("read_partial_message bad seq %lld expected %lld\n",
@@ -1576,7 +1571,7 @@ static int read_partial_message(struct ceph_connection *con)
 
 		con->in_msg_pos.page = 0;
 		if (m->pages)
-			con->in_msg_pos.page_pos = data_off & ~PAGE_MASK;
+			con->in_msg_pos.page_pos = m->page_alignment;
 		else
 			con->in_msg_pos.page_pos = 0;
 		con->in_msg_pos.data_pos = 0;
@@ -2301,6 +2296,7 @@ struct ceph_msg *ceph_msg_new(int type, int front_len, gfp_t flags)
 
 	/* data */
 	m->nr_pages = 0;
+	m->page_alignment = 0;
 	m->pages = NULL;
 	m->pagelist = NULL;
 	m->bio = NULL;
@@ -2370,6 +2366,7 @@ static struct ceph_msg *ceph_alloc_msg(struct ceph_connection *con,
 			       type, front_len);
 			return NULL;
 		}
+		msg->page_alignment = le16_to_cpu(hdr->data_off);
 	}
 	memcpy(&msg->hdr, &con->in_hdr, sizeof(con->in_hdr));
 
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 79391994b3e..3e20a122ffa 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -71,6 +71,7 @@ void ceph_calc_raw_layout(struct ceph_osd_client *osdc,
 		op->extent.length = objlen;
 	}
 	req->r_num_pages = calc_pages_for(off, *plen);
+	req->r_page_alignment = off & ~PAGE_MASK;
 	if (op->op == CEPH_OSD_OP_WRITE)
 		op->payload_len = *plen;
 
@@ -390,6 +391,8 @@ void ceph_osdc_build_request(struct ceph_osd_request *req,
 		req->r_request->hdr.data_len = cpu_to_le32(data_len);
 	}
 
+	req->r_request->page_alignment = req->r_page_alignment;
+
 	BUG_ON(p > msg->front.iov_base + msg->front.iov_len);
 	msg_size = p - msg->front.iov_base;
 	msg->front.iov_len = msg_size;
@@ -419,7 +422,8 @@ struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *osdc,
 					       u32 truncate_seq,
 					       u64 truncate_size,
 					       struct timespec *mtime,
-					       bool use_mempool, int num_reply)
+					       bool use_mempool, int num_reply,
+					       int page_align)
 {
 	struct ceph_osd_req_op ops[3];
 	struct ceph_osd_request *req;
@@ -447,6 +451,10 @@ struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *osdc,
 	calc_layout(osdc, vino, layout, off, plen, req, ops);
 	req->r_file_layout = *layout;  /* keep a copy */
 
+	/* in case it differs from natural alignment that calc_layout
+	   filled in for us */
+	req->r_page_alignment = page_align;
+
 	ceph_osdc_build_request(req, off, plen, ops,
 				snapc,
 				mtime,
@@ -1489,7 +1497,7 @@ int ceph_osdc_readpages(struct ceph_osd_client *osdc,
 			struct ceph_vino vino, struct ceph_file_layout *layout,
 			u64 off, u64 *plen,
 			u32 truncate_seq, u64 truncate_size,
-			struct page **pages, int num_pages)
+			struct page **pages, int num_pages, int page_align)
 {
 	struct ceph_osd_request *req;
 	int rc = 0;
@@ -1499,15 +1507,15 @@ int ceph_osdc_readpages(struct ceph_osd_client *osdc,
 	req = ceph_osdc_new_request(osdc, layout, vino, off, plen,
 				    CEPH_OSD_OP_READ, CEPH_OSD_FLAG_READ,
 				    NULL, 0, truncate_seq, truncate_size, NULL,
-				    false, 1);
+				    false, 1, page_align);
 	if (!req)
 		return -ENOMEM;
 
 	/* it may be a short read due to an object boundary */
 	req->r_pages = pages;
 
-	dout("readpages  final extent is %llu~%llu (%d pages)\n",
-	     off, *plen, req->r_num_pages);
+	dout("readpages  final extent is %llu~%llu (%d pages align %d)\n",
+	     off, *plen, req->r_num_pages, page_align);
 
 	rc = ceph_osdc_start_request(osdc, req, false);
 	if (!rc)
@@ -1533,6 +1541,7 @@ int ceph_osdc_writepages(struct ceph_osd_client *osdc, struct ceph_vino vino,
 {
 	struct ceph_osd_request *req;
 	int rc = 0;
+	int page_align = off & ~PAGE_MASK;
 
 	BUG_ON(vino.snap != CEPH_NOSNAP);
 	req = ceph_osdc_new_request(osdc, layout, vino, off, &len,
@@ -1541,7 +1550,7 @@ int ceph_osdc_writepages(struct ceph_osd_client *osdc, struct ceph_vino vino,
 					    CEPH_OSD_FLAG_WRITE,
 				    snapc, do_sync,
 				    truncate_seq, truncate_size, mtime,
-				    nofail, 1);
+				    nofail, 1, page_align);
 	if (!req)
 		return -ENOMEM;
 
@@ -1638,8 +1647,7 @@ static struct ceph_msg *get_reply(struct ceph_connection *con,
 	m = ceph_msg_get(req->r_reply);
 
 	if (data_len > 0) {
-		unsigned data_off = le16_to_cpu(hdr->data_off);
-		int want = calc_pages_for(data_off & ~PAGE_MASK, data_len);
+		int want = calc_pages_for(req->r_page_alignment, data_len);
 
 		if (unlikely(req->r_num_pages < want)) {
 			pr_warning("tid %lld reply %d > expected %d pages\n",
@@ -1651,6 +1659,7 @@ static struct ceph_msg *get_reply(struct ceph_connection *con,
 		}
 		m->pages = req->r_pages;
 		m->nr_pages = req->r_num_pages;
+		m->page_alignment = req->r_page_alignment;
 #ifdef CONFIG_BLOCK
 		m->bio = req->r_bio;
 #endif
diff --git a/net/ceph/pagevec.c b/net/ceph/pagevec.c
index 54caf068715..1a040e64c69 100644
--- a/net/ceph/pagevec.c
+++ b/net/ceph/pagevec.c
@@ -13,8 +13,7 @@
  * build a vector of user pages
  */
 struct page **ceph_get_direct_page_vector(const char __user *data,
-						 int num_pages,
-						 loff_t off, size_t len)
+					  int num_pages, bool write_page)
 {
 	struct page **pages;
 	int rc;
@@ -25,24 +24,27 @@ struct page **ceph_get_direct_page_vector(const char __user *data,
 
 	down_read(&current->mm->mmap_sem);
 	rc = get_user_pages(current, current->mm, (unsigned long)data,
-			    num_pages, 0, 0, pages, NULL);
+			    num_pages, write_page, 0, pages, NULL);
 	up_read(&current->mm->mmap_sem);
-	if (rc < 0)
+	if (rc < num_pages)
 		goto fail;
 	return pages;
 
 fail:
-	kfree(pages);
+	ceph_put_page_vector(pages, rc > 0 ? rc : 0, false);
 	return ERR_PTR(rc);
 }
 EXPORT_SYMBOL(ceph_get_direct_page_vector);
 
-void ceph_put_page_vector(struct page **pages, int num_pages)
+void ceph_put_page_vector(struct page **pages, int num_pages, bool dirty)
 {
 	int i;
 
-	for (i = 0; i < num_pages; i++)
+	for (i = 0; i < num_pages; i++) {
+		if (dirty)
+			set_page_dirty_lock(pages[i]);
 		put_page(pages[i]);
+	}
 	kfree(pages);
 }
 EXPORT_SYMBOL(ceph_put_page_vector);
diff --git a/net/core/datagram.c b/net/core/datagram.c
index cd1e039c875..18ac112ea7a 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -177,7 +177,7 @@ struct sk_buff *__skb_recv_datagram(struct sock *sk, unsigned flags,
 		 * interrupt level will suddenly eat the receive_queue.
 		 *
 		 * Look at current nfs client by the way...
-		 * However, this function was corrent in any case. 8)
+		 * However, this function was correct in any case. 8)
 		 */
 		unsigned long cpu_flags;
 
diff --git a/net/core/dev.c b/net/core/dev.c
index 5968c822c99..a215269d2e3 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -743,34 +743,31 @@ struct net_device *dev_get_by_index(struct net *net, int ifindex)
 EXPORT_SYMBOL(dev_get_by_index);
 
 /**
- *	dev_getbyhwaddr - find a device by its hardware address
+ *	dev_getbyhwaddr_rcu - find a device by its hardware address
  *	@net: the applicable net namespace
  *	@type: media type of device
  *	@ha: hardware address
  *
  *	Search for an interface by MAC address. Returns NULL if the device
- *	is not found or a pointer to the device. The caller must hold the
- *	rtnl semaphore. The returned device has not had its ref count increased
+ *	is not found or a pointer to the device. The caller must hold RCU
+ *	The returned device has not had its ref count increased
  *	and the caller must therefore be careful about locking
  *
- *	BUGS:
- *	If the API was consistent this would be __dev_get_by_hwaddr
  */
 
-struct net_device *dev_getbyhwaddr(struct net *net, unsigned short type, char *ha)
+struct net_device *dev_getbyhwaddr_rcu(struct net *net, unsigned short type,
+				       const char *ha)
 {
 	struct net_device *dev;
 
-	ASSERT_RTNL();
-
-	for_each_netdev(net, dev)
+	for_each_netdev_rcu(net, dev)
 		if (dev->type == type &&
 		    !memcmp(dev->dev_addr, ha, dev->addr_len))
 			return dev;
 
 	return NULL;
 }
-EXPORT_SYMBOL(dev_getbyhwaddr);
+EXPORT_SYMBOL(dev_getbyhwaddr_rcu);
 
 struct net_device *__dev_getfirstbyhwtype(struct net *net, unsigned short type)
 {
@@ -1225,52 +1222,90 @@ int dev_open(struct net_device *dev)
 }
 EXPORT_SYMBOL(dev_open);
 
-static int __dev_close(struct net_device *dev)
+static int __dev_close_many(struct list_head *head)
 {
-	const struct net_device_ops *ops = dev->netdev_ops;
+	struct net_device *dev;
 
 	ASSERT_RTNL();
 	might_sleep();
 
-	/*
-	 *	Tell people we are going down, so that they can
-	 *	prepare to death, when device is still operating.
-	 */
-	call_netdevice_notifiers(NETDEV_GOING_DOWN, dev);
+	list_for_each_entry(dev, head, unreg_list) {
+		/*
+		 *	Tell people we are going down, so that they can
+		 *	prepare to death, when device is still operating.
+		 */
+		call_netdevice_notifiers(NETDEV_GOING_DOWN, dev);
 
-	clear_bit(__LINK_STATE_START, &dev->state);
+		clear_bit(__LINK_STATE_START, &dev->state);
 
-	/* Synchronize to scheduled poll. We cannot touch poll list,
-	 * it can be even on different cpu. So just clear netif_running().
-	 *
-	 * dev->stop() will invoke napi_disable() on all of it's
-	 * napi_struct instances on this device.
-	 */
-	smp_mb__after_clear_bit(); /* Commit netif_running(). */
+		/* Synchronize to scheduled poll. We cannot touch poll list, it
+		 * can be even on different cpu. So just clear netif_running().
+		 *
+		 * dev->stop() will invoke napi_disable() on all of it's
+		 * napi_struct instances on this device.
+		 */
+		smp_mb__after_clear_bit(); /* Commit netif_running(). */
+	}
 
-	dev_deactivate(dev);
+	dev_deactivate_many(head);
 
-	/*
-	 *	Call the device specific close. This cannot fail.
-	 *	Only if device is UP
-	 *
-	 *	We allow it to be called even after a DETACH hot-plug
-	 *	event.
-	 */
-	if (ops->ndo_stop)
-		ops->ndo_stop(dev);
+	list_for_each_entry(dev, head, unreg_list) {
+		const struct net_device_ops *ops = dev->netdev_ops;
 
-	/*
-	 *	Device is now down.
-	 */
+		/*
+		 *	Call the device specific close. This cannot fail.
+		 *	Only if device is UP
+		 *
+		 *	We allow it to be called even after a DETACH hot-plug
+		 *	event.
+		 */
+		if (ops->ndo_stop)
+			ops->ndo_stop(dev);
+
+		/*
+		 *	Device is now down.
+		 */
+
+		dev->flags &= ~IFF_UP;
+
+		/*
+		 *	Shutdown NET_DMA
+		 */
+		net_dmaengine_put();
+	}
+
+	return 0;
+}
+
+static int __dev_close(struct net_device *dev)
+{
+	LIST_HEAD(single);
+
+	list_add(&dev->unreg_list, &single);
+	return __dev_close_many(&single);
+}
+
+int dev_close_many(struct list_head *head)
+{
+	struct net_device *dev, *tmp;
+	LIST_HEAD(tmp_list);
+
+	list_for_each_entry_safe(dev, tmp, head, unreg_list)
+		if (!(dev->flags & IFF_UP))
+			list_move(&dev->unreg_list, &tmp_list);
 
-	dev->flags &= ~IFF_UP;
+	__dev_close_many(head);
 
 	/*
-	 *	Shutdown NET_DMA
+	 * Tell people we are down
 	 */
-	net_dmaengine_put();
+	list_for_each_entry(dev, head, unreg_list) {
+		rtmsg_ifinfo(RTM_NEWLINK, dev, IFF_UP|IFF_RUNNING);
+		call_netdevice_notifiers(NETDEV_DOWN, dev);
+	}
 
+	/* rollback_registered_many needs the complete original list */
+	list_splice(&tmp_list, head);
 	return 0;
 }
 
@@ -1285,16 +1320,10 @@ static int __dev_close(struct net_device *dev)
  */
 int dev_close(struct net_device *dev)
 {
-	if (!(dev->flags & IFF_UP))
-		return 0;
-
-	__dev_close(dev);
+	LIST_HEAD(single);
 
-	/*
-	 * Tell people we are down
-	 */
-	rtmsg_ifinfo(RTM_NEWLINK, dev, IFF_UP|IFF_RUNNING);
-	call_netdevice_notifiers(NETDEV_DOWN, dev);
+	list_add(&dev->unreg_list, &single);
+	dev_close_many(&single);
 
 	return 0;
 }
@@ -1499,6 +1528,14 @@ int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
 }
 EXPORT_SYMBOL_GPL(dev_forward_skb);
 
+static inline int deliver_skb(struct sk_buff *skb,
+			      struct packet_type *pt_prev,
+			      struct net_device *orig_dev)
+{
+	atomic_inc(&skb->users);
+	return pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
+}
+
 /*
  *	Support routine. Sends outgoing frames to any network
  *	taps currently in use.
@@ -1507,13 +1544,8 @@ EXPORT_SYMBOL_GPL(dev_forward_skb);
 static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct packet_type *ptype;
-
-#ifdef CONFIG_NET_CLS_ACT
-	if (!(skb->tstamp.tv64 && (G_TC_FROM(skb->tc_verd) & AT_INGRESS)))
-		net_timestamp_set(skb);
-#else
-	net_timestamp_set(skb);
-#endif
+	struct sk_buff *skb2 = NULL;
+	struct packet_type *pt_prev = NULL;
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(ptype, &ptype_all, list) {
@@ -1523,10 +1555,18 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 		if ((ptype->dev == dev || !ptype->dev) &&
 		    (ptype->af_packet_priv == NULL ||
 		     (struct sock *)ptype->af_packet_priv != skb->sk)) {
-			struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
+			if (pt_prev) {
+				deliver_skb(skb2, pt_prev, skb->dev);
+				pt_prev = ptype;
+				continue;
+			}
+
+			skb2 = skb_clone(skb, GFP_ATOMIC);
 			if (!skb2)
 				break;
 
+			net_timestamp_set(skb2);
+
 			/* skb->nh should be correctly
 			   set by sender, so that the second statement is
 			   just protection against buggy protocols.
@@ -1545,9 +1585,11 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 
 			skb2->transport_header = skb2->network_header;
 			skb2->pkt_type = PACKET_OUTGOING;
-			ptype->func(skb2, skb->dev, ptype, skb->dev);
+			pt_prev = ptype;
 		}
 	}
+	if (pt_prev)
+		pt_prev->func(skb2, skb->dev, pt_prev, skb->dev);
 	rcu_read_unlock();
 }
 
@@ -1557,12 +1599,19 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
  */
 int netif_set_real_num_tx_queues(struct net_device *dev, unsigned int txq)
 {
+	int rc;
+
 	if (txq < 1 || txq > dev->num_tx_queues)
 		return -EINVAL;
 
 	if (dev->reg_state == NETREG_REGISTERED) {
 		ASSERT_RTNL();
 
+		rc = netdev_queue_update_kobjects(dev, dev->real_num_tx_queues,
+						  txq);
+		if (rc)
+			return rc;
+
 		if (txq < dev->real_num_tx_queues)
 			qdisc_reset_all_tx_gt(dev, txq);
 	}
@@ -1757,7 +1806,7 @@ int skb_checksum_help(struct sk_buff *skb)
 		goto out_set_summed;
 	}
 
-	offset = skb->csum_start - skb_headroom(skb);
+	offset = skb_checksum_start_offset(skb);
 	BUG_ON(offset >= skb_headlen(skb));
 	csum = skb_checksum(skb, offset, skb->len - offset, 0);
 
@@ -1794,16 +1843,18 @@ struct sk_buff *skb_gso_segment(struct sk_buff *skb, int features)
 	struct sk_buff *segs = ERR_PTR(-EPROTONOSUPPORT);
 	struct packet_type *ptype;
 	__be16 type = skb->protocol;
+	int vlan_depth = ETH_HLEN;
 	int err;
 
-	if (type == htons(ETH_P_8021Q)) {
-		struct vlan_ethhdr *veh;
+	while (type == htons(ETH_P_8021Q)) {
+		struct vlan_hdr *vh;
 
-		if (unlikely(!pskb_may_pull(skb, VLAN_ETH_HLEN)))
+		if (unlikely(!pskb_may_pull(skb, vlan_depth + VLAN_HLEN)))
 			return ERR_PTR(-EINVAL);
 
-		veh = (struct vlan_ethhdr *)skb->data;
-		type = veh->h_vlan_encapsulated_proto;
+		vh = (struct vlan_hdr *)(skb->data + vlan_depth);
+		type = vh->h_vlan_encapsulated_proto;
+		vlan_depth += VLAN_HLEN;
 	}
 
 	skb_reset_mac_header(skb);
@@ -1966,6 +2017,23 @@ static inline void skb_orphan_try(struct sk_buff *skb)
 	}
 }
 
+int netif_get_vlan_features(struct sk_buff *skb, struct net_device *dev)
+{
+	__be16 protocol = skb->protocol;
+
+	if (protocol == htons(ETH_P_8021Q)) {
+		struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data;
+		protocol = veh->h_vlan_encapsulated_proto;
+	} else if (!skb->vlan_tci)
+		return dev->features;
+
+	if (protocol != htons(ETH_P_8021Q))
+		return dev->features & dev->vlan_features;
+	else
+		return 0;
+}
+EXPORT_SYMBOL(netif_get_vlan_features);
+
 /*
  * Returns true if either:
  *	1. skb has frag_list and the device doesn't support FRAGLIST, or
@@ -1976,15 +2044,20 @@ static inline void skb_orphan_try(struct sk_buff *skb)
 static inline int skb_needs_linearize(struct sk_buff *skb,
 				      struct net_device *dev)
 {
-	int features = dev->features;
+	if (skb_is_nonlinear(skb)) {
+		int features = dev->features;
 
-	if (skb->protocol == htons(ETH_P_8021Q) || vlan_tx_tag_present(skb))
-		features &= dev->vlan_features;
+		if (vlan_tx_tag_present(skb))
+			features &= dev->vlan_features;
 
-	return skb_is_nonlinear(skb) &&
-	       ((skb_has_frag_list(skb) && !(features & NETIF_F_FRAGLIST)) ||
-		(skb_shinfo(skb)->nr_frags && (!(features & NETIF_F_SG) ||
-					      illegal_highdma(dev, skb))));
+		return (skb_has_frag_list(skb) &&
+			!(features & NETIF_F_FRAGLIST)) ||
+			(skb_shinfo(skb)->nr_frags &&
+			(!(features & NETIF_F_SG) ||
+			illegal_highdma(dev, skb)));
+	}
+
+	return 0;
 }
 
 int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
@@ -1994,9 +2067,6 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
 	int rc = NETDEV_TX_OK;
 
 	if (likely(!skb->next)) {
-		if (!list_empty(&ptype_all))
-			dev_queue_xmit_nit(skb, dev);
-
 		/*
 		 * If device doesnt need skb->dst, release it right now while
 		 * its hot in this cpu cache
@@ -2004,6 +2074,9 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
 		if (dev->priv_flags & IFF_XMIT_DST_RELEASE)
 			skb_dst_drop(skb);
 
+		if (!list_empty(&ptype_all))
+			dev_queue_xmit_nit(skb, dev);
+
 		skb_orphan_try(skb);
 
 		if (vlan_tx_tag_present(skb) &&
@@ -2030,8 +2103,8 @@ int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev,
 			 * checksumming here.
 			 */
 			if (skb->ip_summed == CHECKSUM_PARTIAL) {
-				skb_set_transport_header(skb, skb->csum_start -
-					      skb_headroom(skb));
+				skb_set_transport_header(skb,
+					skb_checksum_start_offset(skb));
 				if (!dev_can_checksum(dev, skb) &&
 				     skb_checksum_help(skb))
 					goto out_kfree_skb;
@@ -2084,14 +2157,19 @@ out:
 
 static u32 hashrnd __read_mostly;
 
-u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb)
+/*
+ * Returns a Tx hash based on the given packet descriptor a Tx queues' number
+ * to be used as a distribution range.
+ */
+u16 __skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb,
+		  unsigned int num_tx_queues)
 {
 	u32 hash;
 
 	if (skb_rx_queue_recorded(skb)) {
 		hash = skb_get_rx_queue(skb);
-		while (unlikely(hash >= dev->real_num_tx_queues))
-			hash -= dev->real_num_tx_queues;
+		while (unlikely(hash >= num_tx_queues))
+			hash -= num_tx_queues;
 		return hash;
 	}
 
@@ -2101,9 +2179,9 @@ u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb)
 		hash = (__force u16) skb->protocol ^ skb->rxhash;
 	hash = jhash_1word(hash, hashrnd);
 
-	return (u16) (((u64) hash * dev->real_num_tx_queues) >> 32);
+	return (u16) (((u64) hash * num_tx_queues) >> 32);
 }
-EXPORT_SYMBOL(skb_tx_hash);
+EXPORT_SYMBOL(__skb_tx_hash);
 
 static inline u16 dev_cap_txqueue(struct net_device *dev, u16 queue_index)
 {
@@ -2118,26 +2196,70 @@ static inline u16 dev_cap_txqueue(struct net_device *dev, u16 queue_index)
 	return queue_index;
 }
 
+static inline int get_xps_queue(struct net_device *dev, struct sk_buff *skb)
+{
+#ifdef CONFIG_XPS
+	struct xps_dev_maps *dev_maps;
+	struct xps_map *map;
+	int queue_index = -1;
+
+	rcu_read_lock();
+	dev_maps = rcu_dereference(dev->xps_maps);
+	if (dev_maps) {
+		map = rcu_dereference(
+		    dev_maps->cpu_map[raw_smp_processor_id()]);
+		if (map) {
+			if (map->len == 1)
+				queue_index = map->queues[0];
+			else {
+				u32 hash;
+				if (skb->sk && skb->sk->sk_hash)
+					hash = skb->sk->sk_hash;
+				else
+					hash = (__force u16) skb->protocol ^
+					    skb->rxhash;
+				hash = jhash_1word(hash, hashrnd);
+				queue_index = map->queues[
+				    ((u64)hash * map->len) >> 32];
+			}
+			if (unlikely(queue_index >= dev->real_num_tx_queues))
+				queue_index = -1;
+		}
+	}
+	rcu_read_unlock();
+
+	return queue_index;
+#else
+	return -1;
+#endif
+}
+
 static struct netdev_queue *dev_pick_tx(struct net_device *dev,
 					struct sk_buff *skb)
 {
 	int queue_index;
 	const struct net_device_ops *ops = dev->netdev_ops;
 
-	if (ops->ndo_select_queue) {
+	if (dev->real_num_tx_queues == 1)
+		queue_index = 0;
+	else if (ops->ndo_select_queue) {
 		queue_index = ops->ndo_select_queue(dev, skb);
 		queue_index = dev_cap_txqueue(dev, queue_index);
 	} else {
 		struct sock *sk = skb->sk;
 		queue_index = sk_tx_queue_get(sk);
-		if (queue_index < 0 || queue_index >= dev->real_num_tx_queues) {
 
-			queue_index = 0;
-			if (dev->real_num_tx_queues > 1)
+		if (queue_index < 0 || skb->ooo_okay ||
+		    queue_index >= dev->real_num_tx_queues) {
+			int old_index = queue_index;
+
+			queue_index = get_xps_queue(dev, skb);
+			if (queue_index < 0)
 				queue_index = skb_tx_hash(dev, skb);
 
-			if (sk) {
-				struct dst_entry *dst = rcu_dereference_check(sk->sk_dst_cache, 1);
+			if (queue_index != old_index && sk) {
+				struct dst_entry *dst =
+				    rcu_dereference_check(sk->sk_dst_cache, 1);
 
 				if (dst && skb_dst(skb) == dst)
 					sk_tx_queue_set(sk, queue_index);
@@ -2711,14 +2833,6 @@ static void net_tx_action(struct softirq_action *h)
 	}
 }
 
-static inline int deliver_skb(struct sk_buff *skb,
-			      struct packet_type *pt_prev,
-			      struct net_device *orig_dev)
-{
-	atomic_inc(&skb->users);
-	return pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
-}
-
 #if (defined(CONFIG_BRIDGE) || defined(CONFIG_BRIDGE_MODULE)) && \
     (defined(CONFIG_ATM_LANE) || defined(CONFIG_ATM_LANE_MODULE))
 /* This hook is defined here for ATM LANE */
@@ -4886,10 +5000,12 @@ static void rollback_registered_many(struct list_head *head)
 		}
 
 		BUG_ON(dev->reg_state != NETREG_REGISTERED);
+	}
 
-		/* If device is running, close it first. */
-		dev_close(dev);
+	/* If device is running, close it first. */
+	dev_close_many(head);
 
+	list_for_each_entry(dev, head, unreg_list) {
 		/* And unlink it from device chain. */
 		unlist_netdevice(dev);
 
@@ -4966,10 +5082,13 @@ unsigned long netdev_fix_features(unsigned long features, const char *name)
 	}
 
 	if (features & NETIF_F_UFO) {
-		if (!(features & NETIF_F_GEN_CSUM)) {
+		/* maybe split UFO into V4 and V6? */
+		if (!((features & NETIF_F_GEN_CSUM) ||
+		    (features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))
+			    == (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
 			if (name)
 				printk(KERN_ERR "%s: Dropping NETIF_F_UFO "
-				       "since no NETIF_F_HW_CSUM feature.\n",
+				       "since no checksum offload features.\n",
 				       name);
 			features &= ~NETIF_F_UFO;
 		}
@@ -5013,9 +5132,9 @@ void netif_stacked_transfer_operstate(const struct net_device *rootdev,
 }
 EXPORT_SYMBOL(netif_stacked_transfer_operstate);
 
+#ifdef CONFIG_RPS
 static int netif_alloc_rx_queues(struct net_device *dev)
 {
-#ifdef CONFIG_RPS
 	unsigned int i, count = dev->num_rx_queues;
 	struct netdev_rx_queue *rx;
 
@@ -5028,15 +5147,22 @@ static int netif_alloc_rx_queues(struct net_device *dev)
 	}
 	dev->_rx = rx;
 
-	/*
-	 * Set a pointer to first element in the array which holds the
-	 * reference count.
-	 */
 	for (i = 0; i < count; i++)
-		rx[i].first = rx;
-#endif
+		rx[i].dev = dev;
 	return 0;
 }
+#endif
+
+static void netdev_init_one_queue(struct net_device *dev,
+				  struct netdev_queue *queue, void *_unused)
+{
+	/* Initialize queue lock */
+	spin_lock_init(&queue->_xmit_lock);
+	netdev_set_xmit_lockdep_class(&queue->_xmit_lock, dev->type);
+	queue->xmit_lock_owner = -1;
+	netdev_queue_numa_node_write(queue, NUMA_NO_NODE);
+	queue->dev = dev;
+}
 
 static int netif_alloc_netdev_queues(struct net_device *dev)
 {
@@ -5052,25 +5178,11 @@ static int netif_alloc_netdev_queues(struct net_device *dev)
 		return -ENOMEM;
 	}
 	dev->_tx = tx;
-	return 0;
-}
 
-static void netdev_init_one_queue(struct net_device *dev,
-				  struct netdev_queue *queue,
-				  void *_unused)
-{
-	queue->dev = dev;
-
-	/* Initialize queue lock */
-	spin_lock_init(&queue->_xmit_lock);
-	netdev_set_xmit_lockdep_class(&queue->_xmit_lock, dev->type);
-	queue->xmit_lock_owner = -1;
-}
-
-static void netdev_init_queues(struct net_device *dev)
-{
 	netdev_for_each_tx_queue(dev, netdev_init_one_queue, NULL);
 	spin_lock_init(&dev->tx_global_lock);
+
+	return 0;
 }
 
 /**
@@ -5109,16 +5221,6 @@ int register_netdevice(struct net_device *dev)
 
 	dev->iflink = -1;
 
-	ret = netif_alloc_rx_queues(dev);
-	if (ret)
-		goto out;
-
-	ret = netif_alloc_netdev_queues(dev);
-	if (ret)
-		goto out;
-
-	netdev_init_queues(dev);
-
 	/* Init, if this function is available */
 	if (dev->netdev_ops->ndo_init) {
 		ret = dev->netdev_ops->ndo_init(dev);
@@ -5576,10 +5678,14 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 
 	dev->num_tx_queues = queue_count;
 	dev->real_num_tx_queues = queue_count;
+	if (netif_alloc_netdev_queues(dev))
+		goto free_pcpu;
 
 #ifdef CONFIG_RPS
 	dev->num_rx_queues = queue_count;
 	dev->real_num_rx_queues = queue_count;
+	if (netif_alloc_rx_queues(dev))
+		goto free_pcpu;
 #endif
 
 	dev->gso_max_size = GSO_MAX_SIZE;
@@ -5596,6 +5702,11 @@ struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
 
 free_pcpu:
 	free_percpu(dev->pcpu_refcnt);
+	kfree(dev->_tx);
+#ifdef CONFIG_RPS
+	kfree(dev->_rx);
+#endif
+
 free_p:
 	kfree(p);
 	return NULL;
@@ -5617,6 +5728,9 @@ void free_netdev(struct net_device *dev)
 	release_net(dev_net(dev));
 
 	kfree(dev->_tx);
+#ifdef CONFIG_RPS
+	kfree(dev->_rx);
+#endif
 
 	kfree(rcu_dereference_raw(dev->ingress_queue));
 
diff --git a/net/core/dst.c b/net/core/dst.c
index 8abe628b79f..b99c7c7ffce 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -370,6 +370,7 @@ static int dst_dev_event(struct notifier_block *this, unsigned long event,
 
 static struct notifier_block dst_dev_notifier = {
 	.notifier_call	= dst_dev_event,
+	.priority = -10, /* must be called after other network notifiers */
 };
 
 void __init dst_init(void)
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 956a9f4971c..17741782a34 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -891,6 +891,20 @@ static int ethtool_nway_reset(struct net_device *dev)
 	return dev->ethtool_ops->nway_reset(dev);
 }
 
+static int ethtool_get_link(struct net_device *dev, char __user *useraddr)
+{
+	struct ethtool_value edata = { .cmd = ETHTOOL_GLINK };
+
+	if (!dev->ethtool_ops->get_link)
+		return -EOPNOTSUPP;
+
+	edata.data = netif_running(dev) && dev->ethtool_ops->get_link(dev);
+
+	if (copy_to_user(useraddr, &edata, sizeof(edata)))
+		return -EFAULT;
+	return 0;
+}
+
 static int ethtool_get_eeprom(struct net_device *dev, void __user *useraddr)
 {
 	struct ethtool_eeprom eeprom;
@@ -1171,7 +1185,9 @@ static int ethtool_set_ufo(struct net_device *dev, char __user *useraddr)
 		return -EFAULT;
 	if (edata.data && !(dev->features & NETIF_F_SG))
 		return -EINVAL;
-	if (edata.data && !(dev->features & NETIF_F_HW_CSUM))
+	if (edata.data && !((dev->features & NETIF_F_GEN_CSUM) ||
+		(dev->features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))
+			== (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM)))
 		return -EINVAL;
 	return dev->ethtool_ops->set_ufo(dev, edata.data);
 }
@@ -1528,8 +1544,7 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
 		rc = ethtool_nway_reset(dev);
 		break;
 	case ETHTOOL_GLINK:
-		rc = ethtool_get_value(dev, useraddr, ethcmd,
-				       dev->ethtool_ops->get_link);
+		rc = ethtool_get_link(dev, useraddr);
 		break;
 	case ETHTOOL_GEEPROM:
 		rc = ethtool_get_eeprom(dev, useraddr);
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index 82a4369ae15..a20e5d3bbfa 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -181,8 +181,7 @@ static int fib_rule_match(struct fib_rule *rule, struct fib_rules_ops *ops,
 {
 	int ret = 0;
 
-	if (rule->iifindex && (rule->iifindex != fl->iif) &&
-	    !(fl->flags & FLOWI_FLAG_MATCH_ANY_IIF))
+	if (rule->iifindex && (rule->iifindex != fl->iif))
 		goto out;
 
 	if (rule->oifindex && (rule->oifindex != fl->oif))
diff --git a/net/core/filter.c b/net/core/filter.c
index 7beaec36b54..2b27d4efdd4 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -37,9 +37,69 @@
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
 #include <linux/filter.h>
+#include <linux/reciprocal_div.h>
+
+enum {
+	BPF_S_RET_K = 1,
+	BPF_S_RET_A,
+	BPF_S_ALU_ADD_K,
+	BPF_S_ALU_ADD_X,
+	BPF_S_ALU_SUB_K,
+	BPF_S_ALU_SUB_X,
+	BPF_S_ALU_MUL_K,
+	BPF_S_ALU_MUL_X,
+	BPF_S_ALU_DIV_X,
+	BPF_S_ALU_AND_K,
+	BPF_S_ALU_AND_X,
+	BPF_S_ALU_OR_K,
+	BPF_S_ALU_OR_X,
+	BPF_S_ALU_LSH_K,
+	BPF_S_ALU_LSH_X,
+	BPF_S_ALU_RSH_K,
+	BPF_S_ALU_RSH_X,
+	BPF_S_ALU_NEG,
+	BPF_S_LD_W_ABS,
+	BPF_S_LD_H_ABS,
+	BPF_S_LD_B_ABS,
+	BPF_S_LD_W_LEN,
+	BPF_S_LD_W_IND,
+	BPF_S_LD_H_IND,
+	BPF_S_LD_B_IND,
+	BPF_S_LD_IMM,
+	BPF_S_LDX_W_LEN,
+	BPF_S_LDX_B_MSH,
+	BPF_S_LDX_IMM,
+	BPF_S_MISC_TAX,
+	BPF_S_MISC_TXA,
+	BPF_S_ALU_DIV_K,
+	BPF_S_LD_MEM,
+	BPF_S_LDX_MEM,
+	BPF_S_ST,
+	BPF_S_STX,
+	BPF_S_JMP_JA,
+	BPF_S_JMP_JEQ_K,
+	BPF_S_JMP_JEQ_X,
+	BPF_S_JMP_JGE_K,
+	BPF_S_JMP_JGE_X,
+	BPF_S_JMP_JGT_K,
+	BPF_S_JMP_JGT_X,
+	BPF_S_JMP_JSET_K,
+	BPF_S_JMP_JSET_X,
+	/* Ancillary data */
+	BPF_S_ANC_PROTOCOL,
+	BPF_S_ANC_PKTTYPE,
+	BPF_S_ANC_IFINDEX,
+	BPF_S_ANC_NLATTR,
+	BPF_S_ANC_NLATTR_NEST,
+	BPF_S_ANC_MARK,
+	BPF_S_ANC_QUEUE,
+	BPF_S_ANC_HATYPE,
+	BPF_S_ANC_RXHASH,
+	BPF_S_ANC_CPU,
+};
 
 /* No hurry in this branch */
-static void *__load_pointer(struct sk_buff *skb, int k)
+static void *__load_pointer(const struct sk_buff *skb, int k, unsigned int size)
 {
 	u8 *ptr = NULL;
 
@@ -48,21 +108,17 @@ static void *__load_pointer(struct sk_buff *skb, int k)
 	else if (k >= SKF_LL_OFF)
 		ptr = skb_mac_header(skb) + k - SKF_LL_OFF;
 
-	if (ptr >= skb->head && ptr < skb_tail_pointer(skb))
+	if (ptr >= skb->head && ptr + size <= skb_tail_pointer(skb))
 		return ptr;
 	return NULL;
 }
 
-static inline void *load_pointer(struct sk_buff *skb, int k,
+static inline void *load_pointer(const struct sk_buff *skb, int k,
 				 unsigned int size, void *buffer)
 {
 	if (k >= 0)
 		return skb_header_pointer(skb, k, size, buffer);
-	else {
-		if (k >= SKF_AD_OFF)
-			return NULL;
-		return __load_pointer(skb, k);
-	}
+	return __load_pointer(skb, k, size);
 }
 
 /**
@@ -89,7 +145,7 @@ int sk_filter(struct sock *sk, struct sk_buff *skb)
 	rcu_read_lock_bh();
 	filter = rcu_dereference_bh(sk->sk_filter);
 	if (filter) {
-		unsigned int pkt_len = sk_run_filter(skb, filter->insns, filter->len);
+		unsigned int pkt_len = sk_run_filter(skb, filter->insns);
 
 		err = pkt_len ? pskb_trim(skb, pkt_len) : -EPERM;
 	}
@@ -103,48 +159,52 @@ EXPORT_SYMBOL(sk_filter);
  *	sk_run_filter - run a filter on a socket
  *	@skb: buffer to run the filter on
  *	@filter: filter to apply
- *	@flen: length of filter
  *
  * Decode and apply filter instructions to the skb->data.
- * Return length to keep, 0 for none. skb is the data we are
- * filtering, filter is the array of filter instructions, and
- * len is the number of filter blocks in the array.
+ * Return length to keep, 0 for none. @skb is the data we are
+ * filtering, @filter is the array of filter instructions.
+ * Because all jumps are guaranteed to be before last instruction,
+ * and last instruction guaranteed to be a RET, we dont need to check
+ * flen. (We used to pass to this function the length of filter)
  */
-unsigned int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int flen)
+unsigned int sk_run_filter(const struct sk_buff *skb,
+			   const struct sock_filter *fentry)
 {
-	struct sock_filter *fentry;	/* We walk down these */
 	void *ptr;
 	u32 A = 0;			/* Accumulator */
 	u32 X = 0;			/* Index Register */
 	u32 mem[BPF_MEMWORDS];		/* Scratch Memory Store */
 	u32 tmp;
 	int k;
-	int pc;
 
 	/*
 	 * Process array of filter instructions.
 	 */
-	for (pc = 0; pc < flen; pc++) {
-		fentry = &filter[pc];
+	for (;; fentry++) {
+#if defined(CONFIG_X86_32)
+#define	K (fentry->k)
+#else
+		const u32 K = fentry->k;
+#endif
 
 		switch (fentry->code) {
 		case BPF_S_ALU_ADD_X:
 			A += X;
 			continue;
 		case BPF_S_ALU_ADD_K:
-			A += fentry->k;
+			A += K;
 			continue;
 		case BPF_S_ALU_SUB_X:
 			A -= X;
 			continue;
 		case BPF_S_ALU_SUB_K:
-			A -= fentry->k;
+			A -= K;
 			continue;
 		case BPF_S_ALU_MUL_X:
 			A *= X;
 			continue;
 		case BPF_S_ALU_MUL_K:
-			A *= fentry->k;
+			A *= K;
 			continue;
 		case BPF_S_ALU_DIV_X:
 			if (X == 0)
@@ -152,89 +212,89 @@ unsigned int sk_run_filter(struct sk_buff *skb, struct sock_filter *filter, int
 			A /= X;
 			continue;
 		case BPF_S_ALU_DIV_K:
-			A /= fentry->k;
+			A = reciprocal_divide(A, K);
 			continue;
 		case BPF_S_ALU_AND_X:
 			A &= X;
 			continue;
 		case BPF_S_ALU_AND_K:
-			A &= fentry->k;
+			A &= K;
 			continue;
 		case BPF_S_ALU_OR_X:
 			A |= X;
 			continue;
 		case BPF_S_ALU_OR_K:
-			A |= fentry->k;
+			A |= K;
 			continue;
 		case BPF_S_ALU_LSH_X:
 			A <<= X;
 			continue;
 		case BPF_S_ALU_LSH_K:
-			A <<= fentry->k;
+			A <<= K;
 			continue;
 		case BPF_S_ALU_RSH_X:
 			A >>= X;
 			continue;
 		case BPF_S_ALU_RSH_K:
-			A >>= fentry->k;
+			A >>= K;
 			continue;
 		case BPF_S_ALU_NEG:
 			A = -A;
 			continue;
 		case BPF_S_JMP_JA:
-			pc += fentry->k;
+			fentry += K;
 			continue;
 		case BPF_S_JMP_JGT_K:
-			pc += (A > fentry->k) ? fentry->jt : fentry->jf;
+			fentry += (A > K) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JGE_K:
-			pc += (A >= fentry->k) ? fentry->jt : fentry->jf;
+			fentry += (A >= K) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JEQ_K:
-			pc += (A == fentry->k) ? fentry->jt : fentry->jf;
+			fentry += (A == K) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JSET_K:
-			pc += (A & fentry->k) ? fentry->jt : fentry->jf;
+			fentry += (A & K) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JGT_X:
-			pc += (A > X) ? fentry->jt : fentry->jf;
+			fentry += (A > X) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JGE_X:
-			pc += (A >= X) ? fentry->jt : fentry->jf;
+			fentry += (A >= X) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JEQ_X:
-			pc += (A == X) ? fentry->jt : fentry->jf;
+			fentry += (A == X) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_JMP_JSET_X:
-			pc += (A & X) ? fentry->jt : fentry->jf;
+			fentry += (A & X) ? fentry->jt : fentry->jf;
 			continue;
 		case BPF_S_LD_W_ABS:
-			k = fentry->k;
+			k = K;
 load_w:
 			ptr = load_pointer(skb, k, 4, &tmp);
 			if (ptr != NULL) {
 				A = get_unaligned_be32(ptr);
 				continue;
 			}
-			break;
+			return 0;
 		case BPF_S_LD_H_ABS:
-			k = fentry->k;
+			k = K;
 load_h:
 			ptr = load_pointer(skb, k, 2, &tmp);
 			if (ptr != NULL) {
 				A = get_unaligned_be16(ptr);
 				continue;
 			}
-			break;
+			return 0;
 		case BPF_S_LD_B_ABS:
-			k = fentry->k;
+			k = K;
 load_b:
 			ptr = load_pointer(skb, k, 1, &tmp);
 			if (ptr != NULL) {
 				A = *(u8 *)ptr;
 				continue;
 			}
-			break;
+			return 0;
 		case BPF_S_LD_W_LEN:
 			A = skb->len;
 			continue;
@@ -242,32 +302,32 @@ load_b:
 			X = skb->len;
 			continue;
 		case BPF_S_LD_W_IND:
-			k = X + fentry->k;
+			k = X + K;
 			goto load_w;
 		case BPF_S_LD_H_IND:
-			k = X + fentry->k;
+			k = X + K;
 			goto load_h;
 		case BPF_S_LD_B_IND:
-			k = X + fentry->k;
+			k = X + K;
 			goto load_b;
 		case BPF_S_LDX_B_MSH:
-			ptr = load_pointer(skb, fentry->k, 1, &tmp);
+			ptr = load_pointer(skb, K, 1, &tmp);
 			if (ptr != NULL) {
 				X = (*(u8 *)ptr & 0xf) << 2;
 				continue;
 			}
 			return 0;
 		case BPF_S_LD_IMM:
-			A = fentry->k;
+			A = K;
 			continue;
 		case BPF_S_LDX_IMM:
-			X = fentry->k;
+			X = K;
 			continue;
 		case BPF_S_LD_MEM:
-			A = mem[fentry->k];
+			A = mem[K];
 			continue;
 		case BPF_S_LDX_MEM:
-			X = mem[fentry->k];
+			X = mem[K];
 			continue;
 		case BPF_S_MISC_TAX:
 			X = A;
@@ -276,48 +336,44 @@ load_b:
 			A = X;
 			continue;
 		case BPF_S_RET_K:
-			return fentry->k;
+			return K;
 		case BPF_S_RET_A:
 			return A;
 		case BPF_S_ST:
-			mem[fentry->k] = A;
+			mem[K] = A;
 			continue;
 		case BPF_S_STX:
-			mem[fentry->k] = X;
+			mem[K] = X;
 			continue;
-		default:
-			WARN_ON(1);
-			return 0;
-		}
-
-		/*
-		 * Handle ancillary data, which are impossible
-		 * (or very difficult) to get parsing packet contents.
-		 */
-		switch (k-SKF_AD_OFF) {
-		case SKF_AD_PROTOCOL:
+		case BPF_S_ANC_PROTOCOL:
 			A = ntohs(skb->protocol);
 			continue;
-		case SKF_AD_PKTTYPE:
+		case BPF_S_ANC_PKTTYPE:
 			A = skb->pkt_type;
 			continue;
-		case SKF_AD_IFINDEX:
+		case BPF_S_ANC_IFINDEX:
 			if (!skb->dev)
 				return 0;
 			A = skb->dev->ifindex;
 			continue;
-		case SKF_AD_MARK:
+		case BPF_S_ANC_MARK:
 			A = skb->mark;
 			continue;
-		case SKF_AD_QUEUE:
+		case BPF_S_ANC_QUEUE:
 			A = skb->queue_mapping;
 			continue;
-		case SKF_AD_HATYPE:
+		case BPF_S_ANC_HATYPE:
 			if (!skb->dev)
 				return 0;
 			A = skb->dev->type;
 			continue;
-		case SKF_AD_NLATTR: {
+		case BPF_S_ANC_RXHASH:
+			A = skb->rxhash;
+			continue;
+		case BPF_S_ANC_CPU:
+			A = raw_smp_processor_id();
+			continue;
+		case BPF_S_ANC_NLATTR: {
 			struct nlattr *nla;
 
 			if (skb_is_nonlinear(skb))
@@ -333,7 +389,7 @@ load_b:
 				A = 0;
 			continue;
 		}
-		case SKF_AD_NLATTR_NEST: {
+		case BPF_S_ANC_NLATTR_NEST: {
 			struct nlattr *nla;
 
 			if (skb_is_nonlinear(skb))
@@ -353,6 +409,7 @@ load_b:
 			continue;
 		}
 		default:
+			WARN_ON(1);
 			return 0;
 		}
 	}
@@ -361,6 +418,66 @@ load_b:
 }
 EXPORT_SYMBOL(sk_run_filter);
 
+/*
+ * Security :
+ * A BPF program is able to use 16 cells of memory to store intermediate
+ * values (check u32 mem[BPF_MEMWORDS] in sk_run_filter())
+ * As we dont want to clear mem[] array for each packet going through
+ * sk_run_filter(), we check that filter loaded by user never try to read
+ * a cell if not previously written, and we check all branches to be sure
+ * a malicious user doesnt try to abuse us.
+ */
+static int check_load_and_stores(struct sock_filter *filter, int flen)
+{
+	u16 *masks, memvalid = 0; /* one bit per cell, 16 cells */
+	int pc, ret = 0;
+
+	BUILD_BUG_ON(BPF_MEMWORDS > 16);
+	masks = kmalloc(flen * sizeof(*masks), GFP_KERNEL);
+	if (!masks)
+		return -ENOMEM;
+	memset(masks, 0xff, flen * sizeof(*masks));
+
+	for (pc = 0; pc < flen; pc++) {
+		memvalid &= masks[pc];
+
+		switch (filter[pc].code) {
+		case BPF_S_ST:
+		case BPF_S_STX:
+			memvalid |= (1 << filter[pc].k);
+			break;
+		case BPF_S_LD_MEM:
+		case BPF_S_LDX_MEM:
+			if (!(memvalid & (1 << filter[pc].k))) {
+				ret = -EINVAL;
+				goto error;
+			}
+			break;
+		case BPF_S_JMP_JA:
+			/* a jump must set masks on target */
+			masks[pc + 1 + filter[pc].k] &= memvalid;
+			memvalid = ~0;
+			break;
+		case BPF_S_JMP_JEQ_K:
+		case BPF_S_JMP_JEQ_X:
+		case BPF_S_JMP_JGE_K:
+		case BPF_S_JMP_JGE_X:
+		case BPF_S_JMP_JGT_K:
+		case BPF_S_JMP_JGT_X:
+		case BPF_S_JMP_JSET_X:
+		case BPF_S_JMP_JSET_K:
+			/* a jump must set masks on targets */
+			masks[pc + 1 + filter[pc].jt] &= memvalid;
+			masks[pc + 1 + filter[pc].jf] &= memvalid;
+			memvalid = ~0;
+			break;
+		}
+	}
+error:
+	kfree(masks);
+	return ret;
+}
+
 /**
  *	sk_chk_filter - verify socket filter code
  *	@filter: filter to verify
@@ -377,7 +494,57 @@ EXPORT_SYMBOL(sk_run_filter);
  */
 int sk_chk_filter(struct sock_filter *filter, int flen)
 {
-	struct sock_filter *ftest;
+	/*
+	 * Valid instructions are initialized to non-0.
+	 * Invalid instructions are initialized to 0.
+	 */
+	static const u8 codes[] = {
+		[BPF_ALU|BPF_ADD|BPF_K]  = BPF_S_ALU_ADD_K,
+		[BPF_ALU|BPF_ADD|BPF_X]  = BPF_S_ALU_ADD_X,
+		[BPF_ALU|BPF_SUB|BPF_K]  = BPF_S_ALU_SUB_K,
+		[BPF_ALU|BPF_SUB|BPF_X]  = BPF_S_ALU_SUB_X,
+		[BPF_ALU|BPF_MUL|BPF_K]  = BPF_S_ALU_MUL_K,
+		[BPF_ALU|BPF_MUL|BPF_X]  = BPF_S_ALU_MUL_X,
+		[BPF_ALU|BPF_DIV|BPF_X]  = BPF_S_ALU_DIV_X,
+		[BPF_ALU|BPF_AND|BPF_K]  = BPF_S_ALU_AND_K,
+		[BPF_ALU|BPF_AND|BPF_X]  = BPF_S_ALU_AND_X,
+		[BPF_ALU|BPF_OR|BPF_K]   = BPF_S_ALU_OR_K,
+		[BPF_ALU|BPF_OR|BPF_X]   = BPF_S_ALU_OR_X,
+		[BPF_ALU|BPF_LSH|BPF_K]  = BPF_S_ALU_LSH_K,
+		[BPF_ALU|BPF_LSH|BPF_X]  = BPF_S_ALU_LSH_X,
+		[BPF_ALU|BPF_RSH|BPF_K]  = BPF_S_ALU_RSH_K,
+		[BPF_ALU|BPF_RSH|BPF_X]  = BPF_S_ALU_RSH_X,
+		[BPF_ALU|BPF_NEG]        = BPF_S_ALU_NEG,
+		[BPF_LD|BPF_W|BPF_ABS]   = BPF_S_LD_W_ABS,
+		[BPF_LD|BPF_H|BPF_ABS]   = BPF_S_LD_H_ABS,
+		[BPF_LD|BPF_B|BPF_ABS]   = BPF_S_LD_B_ABS,
+		[BPF_LD|BPF_W|BPF_LEN]   = BPF_S_LD_W_LEN,
+		[BPF_LD|BPF_W|BPF_IND]   = BPF_S_LD_W_IND,
+		[BPF_LD|BPF_H|BPF_IND]   = BPF_S_LD_H_IND,
+		[BPF_LD|BPF_B|BPF_IND]   = BPF_S_LD_B_IND,
+		[BPF_LD|BPF_IMM]         = BPF_S_LD_IMM,
+		[BPF_LDX|BPF_W|BPF_LEN]  = BPF_S_LDX_W_LEN,
+		[BPF_LDX|BPF_B|BPF_MSH]  = BPF_S_LDX_B_MSH,
+		[BPF_LDX|BPF_IMM]        = BPF_S_LDX_IMM,
+		[BPF_MISC|BPF_TAX]       = BPF_S_MISC_TAX,
+		[BPF_MISC|BPF_TXA]       = BPF_S_MISC_TXA,
+		[BPF_RET|BPF_K]          = BPF_S_RET_K,
+		[BPF_RET|BPF_A]          = BPF_S_RET_A,
+		[BPF_ALU|BPF_DIV|BPF_K]  = BPF_S_ALU_DIV_K,
+		[BPF_LD|BPF_MEM]         = BPF_S_LD_MEM,
+		[BPF_LDX|BPF_MEM]        = BPF_S_LDX_MEM,
+		[BPF_ST]                 = BPF_S_ST,
+		[BPF_STX]                = BPF_S_STX,
+		[BPF_JMP|BPF_JA]         = BPF_S_JMP_JA,
+		[BPF_JMP|BPF_JEQ|BPF_K]  = BPF_S_JMP_JEQ_K,
+		[BPF_JMP|BPF_JEQ|BPF_X]  = BPF_S_JMP_JEQ_X,
+		[BPF_JMP|BPF_JGE|BPF_K]  = BPF_S_JMP_JGE_K,
+		[BPF_JMP|BPF_JGE|BPF_X]  = BPF_S_JMP_JGE_X,
+		[BPF_JMP|BPF_JGT|BPF_K]  = BPF_S_JMP_JGT_K,
+		[BPF_JMP|BPF_JGT|BPF_X]  = BPF_S_JMP_JGT_X,
+		[BPF_JMP|BPF_JSET|BPF_K] = BPF_S_JMP_JSET_K,
+		[BPF_JMP|BPF_JSET|BPF_X] = BPF_S_JMP_JSET_X,
+	};
 	int pc;
 
 	if (flen == 0 || flen > BPF_MAXINSNS)
@@ -385,136 +552,31 @@ int sk_chk_filter(struct sock_filter *filter, int flen)
 
 	/* check the filter code now */
 	for (pc = 0; pc < flen; pc++) {
-		ftest = &filter[pc];
-
-		/* Only allow valid instructions */
-		switch (ftest->code) {
-		case BPF_ALU|BPF_ADD|BPF_K:
-			ftest->code = BPF_S_ALU_ADD_K;
-			break;
-		case BPF_ALU|BPF_ADD|BPF_X:
-			ftest->code = BPF_S_ALU_ADD_X;
-			break;
-		case BPF_ALU|BPF_SUB|BPF_K:
-			ftest->code = BPF_S_ALU_SUB_K;
-			break;
-		case BPF_ALU|BPF_SUB|BPF_X:
-			ftest->code = BPF_S_ALU_SUB_X;
-			break;
-		case BPF_ALU|BPF_MUL|BPF_K:
-			ftest->code = BPF_S_ALU_MUL_K;
-			break;
-		case BPF_ALU|BPF_MUL|BPF_X:
-			ftest->code = BPF_S_ALU_MUL_X;
-			break;
-		case BPF_ALU|BPF_DIV|BPF_X:
-			ftest->code = BPF_S_ALU_DIV_X;
-			break;
-		case BPF_ALU|BPF_AND|BPF_K:
-			ftest->code = BPF_S_ALU_AND_K;
-			break;
-		case BPF_ALU|BPF_AND|BPF_X:
-			ftest->code = BPF_S_ALU_AND_X;
-			break;
-		case BPF_ALU|BPF_OR|BPF_K:
-			ftest->code = BPF_S_ALU_OR_K;
-			break;
-		case BPF_ALU|BPF_OR|BPF_X:
-			ftest->code = BPF_S_ALU_OR_X;
-			break;
-		case BPF_ALU|BPF_LSH|BPF_K:
-			ftest->code = BPF_S_ALU_LSH_K;
-			break;
-		case BPF_ALU|BPF_LSH|BPF_X:
-			ftest->code = BPF_S_ALU_LSH_X;
-			break;
-		case BPF_ALU|BPF_RSH|BPF_K:
-			ftest->code = BPF_S_ALU_RSH_K;
-			break;
-		case BPF_ALU|BPF_RSH|BPF_X:
-			ftest->code = BPF_S_ALU_RSH_X;
-			break;
-		case BPF_ALU|BPF_NEG:
-			ftest->code = BPF_S_ALU_NEG;
-			break;
-		case BPF_LD|BPF_W|BPF_ABS:
-			ftest->code = BPF_S_LD_W_ABS;
-			break;
-		case BPF_LD|BPF_H|BPF_ABS:
-			ftest->code = BPF_S_LD_H_ABS;
-			break;
-		case BPF_LD|BPF_B|BPF_ABS:
-			ftest->code = BPF_S_LD_B_ABS;
-			break;
-		case BPF_LD|BPF_W|BPF_LEN:
-			ftest->code = BPF_S_LD_W_LEN;
-			break;
-		case BPF_LD|BPF_W|BPF_IND:
-			ftest->code = BPF_S_LD_W_IND;
-			break;
-		case BPF_LD|BPF_H|BPF_IND:
-			ftest->code = BPF_S_LD_H_IND;
-			break;
-		case BPF_LD|BPF_B|BPF_IND:
-			ftest->code = BPF_S_LD_B_IND;
-			break;
-		case BPF_LD|BPF_IMM:
-			ftest->code = BPF_S_LD_IMM;
-			break;
-		case BPF_LDX|BPF_W|BPF_LEN:
-			ftest->code = BPF_S_LDX_W_LEN;
-			break;
-		case BPF_LDX|BPF_B|BPF_MSH:
-			ftest->code = BPF_S_LDX_B_MSH;
-			break;
-		case BPF_LDX|BPF_IMM:
-			ftest->code = BPF_S_LDX_IMM;
-			break;
-		case BPF_MISC|BPF_TAX:
-			ftest->code = BPF_S_MISC_TAX;
-			break;
-		case BPF_MISC|BPF_TXA:
-			ftest->code = BPF_S_MISC_TXA;
-			break;
-		case BPF_RET|BPF_K:
-			ftest->code = BPF_S_RET_K;
-			break;
-		case BPF_RET|BPF_A:
-			ftest->code = BPF_S_RET_A;
-			break;
+		struct sock_filter *ftest = &filter[pc];
+		u16 code = ftest->code;
 
+		if (code >= ARRAY_SIZE(codes))
+			return -EINVAL;
+		code = codes[code];
+		if (!code)
+			return -EINVAL;
 		/* Some instructions need special checks */
-
+		switch (code) {
+		case BPF_S_ALU_DIV_K:
 			/* check for division by zero */
-		case BPF_ALU|BPF_DIV|BPF_K:
 			if (ftest->k == 0)
 				return -EINVAL;
-			ftest->code = BPF_S_ALU_DIV_K;
-			break;
-
-		/* check for invalid memory addresses */
-		case BPF_LD|BPF_MEM:
-			if (ftest->k >= BPF_MEMWORDS)
-				return -EINVAL;
-			ftest->code = BPF_S_LD_MEM;
+			ftest->k = reciprocal_value(ftest->k);
 			break;
-		case BPF_LDX|BPF_MEM:
-			if (ftest->k >= BPF_MEMWORDS)
-				return -EINVAL;
-			ftest->code = BPF_S_LDX_MEM;
-			break;
-		case BPF_ST:
-			if (ftest->k >= BPF_MEMWORDS)
-				return -EINVAL;
-			ftest->code = BPF_S_ST;
-			break;
-		case BPF_STX:
+		case BPF_S_LD_MEM:
+		case BPF_S_LDX_MEM:
+		case BPF_S_ST:
+		case BPF_S_STX:
+			/* check for invalid memory addresses */
 			if (ftest->k >= BPF_MEMWORDS)
 				return -EINVAL;
-			ftest->code = BPF_S_STX;
 			break;
-
-		case BPF_JMP|BPF_JA:
+		case BPF_S_JMP_JA:
 			/*
 			 * Note, the large ftest->k might cause loops.
 			 * Compare this with conditional jumps below,
@@ -522,40 +584,7 @@ int sk_chk_filter(struct sock_filter *filter, int flen)
 			 */
 			if (ftest->k >= (unsigned)(flen-pc-1))
 				return -EINVAL;
-			ftest->code = BPF_S_JMP_JA;
-			break;
-
-		case BPF_JMP|BPF_JEQ|BPF_K:
-			ftest->code = BPF_S_JMP_JEQ_K;
-			break;
-		case BPF_JMP|BPF_JEQ|BPF_X:
-			ftest->code = BPF_S_JMP_JEQ_X;
-			break;
-		case BPF_JMP|BPF_JGE|BPF_K:
-			ftest->code = BPF_S_JMP_JGE_K;
-			break;
-		case BPF_JMP|BPF_JGE|BPF_X:
-			ftest->code = BPF_S_JMP_JGE_X;
 			break;
-		case BPF_JMP|BPF_JGT|BPF_K:
-			ftest->code = BPF_S_JMP_JGT_K;
-			break;
-		case BPF_JMP|BPF_JGT|BPF_X:
-			ftest->code = BPF_S_JMP_JGT_X;
-			break;
-		case BPF_JMP|BPF_JSET|BPF_K:
-			ftest->code = BPF_S_JMP_JSET_K;
-			break;
-		case BPF_JMP|BPF_JSET|BPF_X:
-			ftest->code = BPF_S_JMP_JSET_X;
-			break;
-
-		default:
-			return -EINVAL;
-		}
-
-			/* for conditionals both must be safe */
-		switch (ftest->code) {
 		case BPF_S_JMP_JEQ_K:
 		case BPF_S_JMP_JEQ_X:
 		case BPF_S_JMP_JGE_K:
@@ -564,42 +593,54 @@ int sk_chk_filter(struct sock_filter *filter, int flen)
 		case BPF_S_JMP_JGT_X:
 		case BPF_S_JMP_JSET_X:
 		case BPF_S_JMP_JSET_K:
+			/* for conditionals both must be safe */
 			if (pc + ftest->jt + 1 >= flen ||
 			    pc + ftest->jf + 1 >= flen)
 				return -EINVAL;
+			break;
+		case BPF_S_LD_W_ABS:
+		case BPF_S_LD_H_ABS:
+		case BPF_S_LD_B_ABS:
+#define ANCILLARY(CODE) case SKF_AD_OFF + SKF_AD_##CODE:	\
+				code = BPF_S_ANC_##CODE;	\
+				break
+			switch (ftest->k) {
+			ANCILLARY(PROTOCOL);
+			ANCILLARY(PKTTYPE);
+			ANCILLARY(IFINDEX);
+			ANCILLARY(NLATTR);
+			ANCILLARY(NLATTR_NEST);
+			ANCILLARY(MARK);
+			ANCILLARY(QUEUE);
+			ANCILLARY(HATYPE);
+			ANCILLARY(RXHASH);
+			ANCILLARY(CPU);
+			}
 		}
+		ftest->code = code;
 	}
 
 	/* last instruction must be a RET code */
 	switch (filter[flen - 1].code) {
 	case BPF_S_RET_K:
 	case BPF_S_RET_A:
-		return 0;
-		break;
-		default:
-			return -EINVAL;
-		}
+		return check_load_and_stores(filter, flen);
+	}
+	return -EINVAL;
 }
 EXPORT_SYMBOL(sk_chk_filter);
 
 /**
- * 	sk_filter_rcu_release: Release a socket filter by rcu_head
+ * 	sk_filter_release_rcu - Release a socket filter by rcu_head
  *	@rcu: rcu_head that contains the sk_filter to free
  */
-static void sk_filter_rcu_release(struct rcu_head *rcu)
+void sk_filter_release_rcu(struct rcu_head *rcu)
 {
 	struct sk_filter *fp = container_of(rcu, struct sk_filter, rcu);
 
-	sk_filter_release(fp);
-}
-
-static void sk_filter_delayed_uncharge(struct sock *sk, struct sk_filter *fp)
-{
-	unsigned int size = sk_filter_len(fp);
-
-	atomic_sub(size, &sk->sk_omem_alloc);
-	call_rcu_bh(&fp->rcu, sk_filter_rcu_release);
+	kfree(fp);
 }
+EXPORT_SYMBOL(sk_filter_release_rcu);
 
 /**
  *	sk_attach_filter - attach a socket filter
@@ -643,7 +684,7 @@ int sk_attach_filter(struct sock_fprog *fprog, struct sock *sk)
 	rcu_assign_pointer(sk->sk_filter, fp);
 
 	if (old_fp)
-		sk_filter_delayed_uncharge(sk, old_fp);
+		sk_filter_uncharge(sk, old_fp);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(sk_attach_filter);
@@ -657,7 +698,7 @@ int sk_detach_filter(struct sock *sk)
 					   sock_owned_by_user(sk));
 	if (filter) {
 		rcu_assign_pointer(sk->sk_filter, NULL);
-		sk_filter_delayed_uncharge(sk, filter);
+		sk_filter_uncharge(sk, filter);
 		ret = 0;
 	}
 	return ret;
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 8cc8f9a79db..60a90291342 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -41,7 +41,6 @@
 
 #define NEIGH_PRINTK(x...) printk(x)
 #define NEIGH_NOPRINTK(x...) do { ; } while(0)
-#define NEIGH_PRINTK0 NEIGH_PRINTK
 #define NEIGH_PRINTK1 NEIGH_NOPRINTK
 #define NEIGH_PRINTK2 NEIGH_NOPRINTK
 
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index a5ff5a89f37..e23c01be5a5 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -706,21 +706,24 @@ static struct attribute *rx_queue_default_attrs[] = {
 static void rx_queue_release(struct kobject *kobj)
 {
 	struct netdev_rx_queue *queue = to_rx_queue(kobj);
-	struct netdev_rx_queue *first = queue->first;
 	struct rps_map *map;
 	struct rps_dev_flow_table *flow_table;
 
 
 	map = rcu_dereference_raw(queue->rps_map);
-	if (map)
+	if (map) {
+		RCU_INIT_POINTER(queue->rps_map, NULL);
 		call_rcu(&map->rcu, rps_map_release);
+	}
 
 	flow_table = rcu_dereference_raw(queue->rps_flow_table);
-	if (flow_table)
+	if (flow_table) {
+		RCU_INIT_POINTER(queue->rps_flow_table, NULL);
 		call_rcu(&flow_table->rcu, rps_dev_flow_table_release);
+	}
 
-	if (atomic_dec_and_test(&first->count))
-		kfree(first);
+	memset(kobj, 0, sizeof(*kobj));
+	dev_put(queue->dev);
 }
 
 static struct kobj_type rx_queue_ktype = {
@@ -732,7 +735,6 @@ static struct kobj_type rx_queue_ktype = {
 static int rx_queue_add_kobject(struct net_device *net, int index)
 {
 	struct netdev_rx_queue *queue = net->_rx + index;
-	struct netdev_rx_queue *first = queue->first;
 	struct kobject *kobj = &queue->kobj;
 	int error = 0;
 
@@ -745,14 +747,16 @@ static int rx_queue_add_kobject(struct net_device *net, int index)
 	}
 
 	kobject_uevent(kobj, KOBJ_ADD);
-	atomic_inc(&first->count);
+	dev_hold(queue->dev);
 
 	return error;
 }
+#endif /* CONFIG_RPS */
 
 int
 net_rx_queue_update_kobjects(struct net_device *net, int old_num, int new_num)
 {
+#ifdef CONFIG_RPS
 	int i;
 	int error = 0;
 
@@ -768,23 +772,423 @@ net_rx_queue_update_kobjects(struct net_device *net, int old_num, int new_num)
 		kobject_put(&net->_rx[i].kobj);
 
 	return error;
+#else
+	return 0;
+#endif
+}
+
+#ifdef CONFIG_XPS
+/*
+ * netdev_queue sysfs structures and functions.
+ */
+struct netdev_queue_attribute {
+	struct attribute attr;
+	ssize_t (*show)(struct netdev_queue *queue,
+	    struct netdev_queue_attribute *attr, char *buf);
+	ssize_t (*store)(struct netdev_queue *queue,
+	    struct netdev_queue_attribute *attr, const char *buf, size_t len);
+};
+#define to_netdev_queue_attr(_attr) container_of(_attr,		\
+    struct netdev_queue_attribute, attr)
+
+#define to_netdev_queue(obj) container_of(obj, struct netdev_queue, kobj)
+
+static ssize_t netdev_queue_attr_show(struct kobject *kobj,
+				      struct attribute *attr, char *buf)
+{
+	struct netdev_queue_attribute *attribute = to_netdev_queue_attr(attr);
+	struct netdev_queue *queue = to_netdev_queue(kobj);
+
+	if (!attribute->show)
+		return -EIO;
+
+	return attribute->show(queue, attribute, buf);
+}
+
+static ssize_t netdev_queue_attr_store(struct kobject *kobj,
+				       struct attribute *attr,
+				       const char *buf, size_t count)
+{
+	struct netdev_queue_attribute *attribute = to_netdev_queue_attr(attr);
+	struct netdev_queue *queue = to_netdev_queue(kobj);
+
+	if (!attribute->store)
+		return -EIO;
+
+	return attribute->store(queue, attribute, buf, count);
+}
+
+static const struct sysfs_ops netdev_queue_sysfs_ops = {
+	.show = netdev_queue_attr_show,
+	.store = netdev_queue_attr_store,
+};
+
+static inline unsigned int get_netdev_queue_index(struct netdev_queue *queue)
+{
+	struct net_device *dev = queue->dev;
+	int i;
+
+	for (i = 0; i < dev->num_tx_queues; i++)
+		if (queue == &dev->_tx[i])
+			break;
+
+	BUG_ON(i >= dev->num_tx_queues);
+
+	return i;
 }
 
-static int rx_queue_register_kobjects(struct net_device *net)
+
+static ssize_t show_xps_map(struct netdev_queue *queue,
+			    struct netdev_queue_attribute *attribute, char *buf)
 {
+	struct net_device *dev = queue->dev;
+	struct xps_dev_maps *dev_maps;
+	cpumask_var_t mask;
+	unsigned long index;
+	size_t len = 0;
+	int i;
+
+	if (!zalloc_cpumask_var(&mask, GFP_KERNEL))
+		return -ENOMEM;
+
+	index = get_netdev_queue_index(queue);
+
+	rcu_read_lock();
+	dev_maps = rcu_dereference(dev->xps_maps);
+	if (dev_maps) {
+		for_each_possible_cpu(i) {
+			struct xps_map *map =
+			    rcu_dereference(dev_maps->cpu_map[i]);
+			if (map) {
+				int j;
+				for (j = 0; j < map->len; j++) {
+					if (map->queues[j] == index) {
+						cpumask_set_cpu(i, mask);
+						break;
+					}
+				}
+			}
+		}
+	}
+	rcu_read_unlock();
+
+	len += cpumask_scnprintf(buf + len, PAGE_SIZE, mask);
+	if (PAGE_SIZE - len < 3) {
+		free_cpumask_var(mask);
+		return -EINVAL;
+	}
+
+	free_cpumask_var(mask);
+	len += sprintf(buf + len, "\n");
+	return len;
+}
+
+static void xps_map_release(struct rcu_head *rcu)
+{
+	struct xps_map *map = container_of(rcu, struct xps_map, rcu);
+
+	kfree(map);
+}
+
+static void xps_dev_maps_release(struct rcu_head *rcu)
+{
+	struct xps_dev_maps *dev_maps =
+	    container_of(rcu, struct xps_dev_maps, rcu);
+
+	kfree(dev_maps);
+}
+
+static DEFINE_MUTEX(xps_map_mutex);
+#define xmap_dereference(P)		\
+	rcu_dereference_protected((P), lockdep_is_held(&xps_map_mutex))
+
+static ssize_t store_xps_map(struct netdev_queue *queue,
+		      struct netdev_queue_attribute *attribute,
+		      const char *buf, size_t len)
+{
+	struct net_device *dev = queue->dev;
+	cpumask_var_t mask;
+	int err, i, cpu, pos, map_len, alloc_len, need_set;
+	unsigned long index;
+	struct xps_map *map, *new_map;
+	struct xps_dev_maps *dev_maps, *new_dev_maps;
+	int nonempty = 0;
+	int numa_node = -2;
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (!alloc_cpumask_var(&mask, GFP_KERNEL))
+		return -ENOMEM;
+
+	index = get_netdev_queue_index(queue);
+
+	err = bitmap_parse(buf, len, cpumask_bits(mask), nr_cpumask_bits);
+	if (err) {
+		free_cpumask_var(mask);
+		return err;
+	}
+
+	new_dev_maps = kzalloc(max_t(unsigned,
+	    XPS_DEV_MAPS_SIZE, L1_CACHE_BYTES), GFP_KERNEL);
+	if (!new_dev_maps) {
+		free_cpumask_var(mask);
+		return -ENOMEM;
+	}
+
+	mutex_lock(&xps_map_mutex);
+
+	dev_maps = xmap_dereference(dev->xps_maps);
+
+	for_each_possible_cpu(cpu) {
+		map = dev_maps ?
+			xmap_dereference(dev_maps->cpu_map[cpu]) : NULL;
+		new_map = map;
+		if (map) {
+			for (pos = 0; pos < map->len; pos++)
+				if (map->queues[pos] == index)
+					break;
+			map_len = map->len;
+			alloc_len = map->alloc_len;
+		} else
+			pos = map_len = alloc_len = 0;
+
+		need_set = cpu_isset(cpu, *mask) && cpu_online(cpu);
+#ifdef CONFIG_NUMA
+		if (need_set) {
+			if (numa_node == -2)
+				numa_node = cpu_to_node(cpu);
+			else if (numa_node != cpu_to_node(cpu))
+				numa_node = -1;
+		}
+#endif
+		if (need_set && pos >= map_len) {
+			/* Need to add queue to this CPU's map */
+			if (map_len >= alloc_len) {
+				alloc_len = alloc_len ?
+				    2 * alloc_len : XPS_MIN_MAP_ALLOC;
+				new_map = kzalloc_node(XPS_MAP_SIZE(alloc_len),
+						       GFP_KERNEL,
+						       cpu_to_node(cpu));
+				if (!new_map)
+					goto error;
+				new_map->alloc_len = alloc_len;
+				for (i = 0; i < map_len; i++)
+					new_map->queues[i] = map->queues[i];
+				new_map->len = map_len;
+			}
+			new_map->queues[new_map->len++] = index;
+		} else if (!need_set && pos < map_len) {
+			/* Need to remove queue from this CPU's map */
+			if (map_len > 1)
+				new_map->queues[pos] =
+				    new_map->queues[--new_map->len];
+			else
+				new_map = NULL;
+		}
+		RCU_INIT_POINTER(new_dev_maps->cpu_map[cpu], new_map);
+	}
+
+	/* Cleanup old maps */
+	for_each_possible_cpu(cpu) {
+		map = dev_maps ?
+			xmap_dereference(dev_maps->cpu_map[cpu]) : NULL;
+		if (map && xmap_dereference(new_dev_maps->cpu_map[cpu]) != map)
+			call_rcu(&map->rcu, xps_map_release);
+		if (new_dev_maps->cpu_map[cpu])
+			nonempty = 1;
+	}
+
+	if (nonempty)
+		rcu_assign_pointer(dev->xps_maps, new_dev_maps);
+	else {
+		kfree(new_dev_maps);
+		rcu_assign_pointer(dev->xps_maps, NULL);
+	}
+
+	if (dev_maps)
+		call_rcu(&dev_maps->rcu, xps_dev_maps_release);
+
+	netdev_queue_numa_node_write(queue, (numa_node >= 0) ? numa_node :
+					    NUMA_NO_NODE);
+
+	mutex_unlock(&xps_map_mutex);
+
+	free_cpumask_var(mask);
+	return len;
+
+error:
+	mutex_unlock(&xps_map_mutex);
+
+	if (new_dev_maps)
+		for_each_possible_cpu(i)
+			kfree(rcu_dereference_protected(
+				new_dev_maps->cpu_map[i],
+				1));
+	kfree(new_dev_maps);
+	free_cpumask_var(mask);
+	return -ENOMEM;
+}
+
+static struct netdev_queue_attribute xps_cpus_attribute =
+    __ATTR(xps_cpus, S_IRUGO | S_IWUSR, show_xps_map, store_xps_map);
+
+static struct attribute *netdev_queue_default_attrs[] = {
+	&xps_cpus_attribute.attr,
+	NULL
+};
+
+static void netdev_queue_release(struct kobject *kobj)
+{
+	struct netdev_queue *queue = to_netdev_queue(kobj);
+	struct net_device *dev = queue->dev;
+	struct xps_dev_maps *dev_maps;
+	struct xps_map *map;
+	unsigned long index;
+	int i, pos, nonempty = 0;
+
+	index = get_netdev_queue_index(queue);
+
+	mutex_lock(&xps_map_mutex);
+	dev_maps = xmap_dereference(dev->xps_maps);
+
+	if (dev_maps) {
+		for_each_possible_cpu(i) {
+			map = xmap_dereference(dev_maps->cpu_map[i]);
+			if (!map)
+				continue;
+
+			for (pos = 0; pos < map->len; pos++)
+				if (map->queues[pos] == index)
+					break;
+
+			if (pos < map->len) {
+				if (map->len > 1)
+					map->queues[pos] =
+					    map->queues[--map->len];
+				else {
+					RCU_INIT_POINTER(dev_maps->cpu_map[i],
+					    NULL);
+					call_rcu(&map->rcu, xps_map_release);
+					map = NULL;
+				}
+			}
+			if (map)
+				nonempty = 1;
+		}
+
+		if (!nonempty) {
+			RCU_INIT_POINTER(dev->xps_maps, NULL);
+			call_rcu(&dev_maps->rcu, xps_dev_maps_release);
+		}
+	}
+
+	mutex_unlock(&xps_map_mutex);
+
+	memset(kobj, 0, sizeof(*kobj));
+	dev_put(queue->dev);
+}
+
+static struct kobj_type netdev_queue_ktype = {
+	.sysfs_ops = &netdev_queue_sysfs_ops,
+	.release = netdev_queue_release,
+	.default_attrs = netdev_queue_default_attrs,
+};
+
+static int netdev_queue_add_kobject(struct net_device *net, int index)
+{
+	struct netdev_queue *queue = net->_tx + index;
+	struct kobject *kobj = &queue->kobj;
+	int error = 0;
+
+	kobj->kset = net->queues_kset;
+	error = kobject_init_and_add(kobj, &netdev_queue_ktype, NULL,
+	    "tx-%u", index);
+	if (error) {
+		kobject_put(kobj);
+		return error;
+	}
+
+	kobject_uevent(kobj, KOBJ_ADD);
+	dev_hold(queue->dev);
+
+	return error;
+}
+#endif /* CONFIG_XPS */
+
+int
+netdev_queue_update_kobjects(struct net_device *net, int old_num, int new_num)
+{
+#ifdef CONFIG_XPS
+	int i;
+	int error = 0;
+
+	for (i = old_num; i < new_num; i++) {
+		error = netdev_queue_add_kobject(net, i);
+		if (error) {
+			new_num = old_num;
+			break;
+		}
+	}
+
+	while (--i >= new_num)
+		kobject_put(&net->_tx[i].kobj);
+
+	return error;
+#else
+	return 0;
+#endif
+}
+
+static int register_queue_kobjects(struct net_device *net)
+{
+	int error = 0, txq = 0, rxq = 0, real_rx = 0, real_tx = 0;
+
+#if defined(CONFIG_RPS) || defined(CONFIG_XPS)
 	net->queues_kset = kset_create_and_add("queues",
 	    NULL, &net->dev.kobj);
 	if (!net->queues_kset)
 		return -ENOMEM;
-	return net_rx_queue_update_kobjects(net, 0, net->real_num_rx_queues);
+#endif
+
+#ifdef CONFIG_RPS
+	real_rx = net->real_num_rx_queues;
+#endif
+	real_tx = net->real_num_tx_queues;
+
+	error = net_rx_queue_update_kobjects(net, 0, real_rx);
+	if (error)
+		goto error;
+	rxq = real_rx;
+
+	error = netdev_queue_update_kobjects(net, 0, real_tx);
+	if (error)
+		goto error;
+	txq = real_tx;
+
+	return 0;
+
+error:
+	netdev_queue_update_kobjects(net, txq, 0);
+	net_rx_queue_update_kobjects(net, rxq, 0);
+	return error;
 }
 
-static void rx_queue_remove_kobjects(struct net_device *net)
+static void remove_queue_kobjects(struct net_device *net)
 {
-	net_rx_queue_update_kobjects(net, net->real_num_rx_queues, 0);
+	int real_rx = 0, real_tx = 0;
+
+#ifdef CONFIG_RPS
+	real_rx = net->real_num_rx_queues;
+#endif
+	real_tx = net->real_num_tx_queues;
+
+	net_rx_queue_update_kobjects(net, real_rx, 0);
+	netdev_queue_update_kobjects(net, real_tx, 0);
+#if defined(CONFIG_RPS) || defined(CONFIG_XPS)
 	kset_unregister(net->queues_kset);
+#endif
 }
-#endif /* CONFIG_RPS */
 
 static const void *net_current_ns(void)
 {
@@ -883,9 +1287,7 @@ void netdev_unregister_kobject(struct net_device * net)
 
 	kobject_get(&dev->kobj);
 
-#ifdef CONFIG_RPS
-	rx_queue_remove_kobjects(net);
-#endif
+	remove_queue_kobjects(net);
 
 	device_del(dev);
 }
@@ -924,13 +1326,11 @@ int netdev_register_kobject(struct net_device *net)
 	if (error)
 		return error;
 
-#ifdef CONFIG_RPS
-	error = rx_queue_register_kobjects(net);
+	error = register_queue_kobjects(net);
 	if (error) {
 		device_del(dev);
 		return error;
 	}
-#endif
 
 	return error;
 }
diff --git a/net/core/net-sysfs.h b/net/core/net-sysfs.h
index 778e1571548..bd7751ec1c4 100644
--- a/net/core/net-sysfs.h
+++ b/net/core/net-sysfs.h
@@ -4,8 +4,8 @@
 int netdev_kobject_init(void);
 int netdev_register_kobject(struct net_device *);
 void netdev_unregister_kobject(struct net_device *);
-#ifdef CONFIG_RPS
 int net_rx_queue_update_kobjects(struct net_device *, int old_num, int new_num);
-#endif
+int netdev_queue_update_kobjects(struct net_device *net,
+				 int old_num, int new_num);
 
 #endif
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 4e98ffac3af..02dc2cbcbe8 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -35,7 +35,6 @@
 
 #define MAX_UDP_CHUNK 1460
 #define MAX_SKBS 32
-#define MAX_QUEUE_DEPTH (MAX_SKBS / 2)
 
 static struct sk_buff_head skb_pool;
 
@@ -76,8 +75,7 @@ static void queue_process(struct work_struct *work)
 
 		local_irq_save(flags);
 		__netif_tx_lock(txq, smp_processor_id());
-		if (netif_tx_queue_stopped(txq) ||
-		    netif_tx_queue_frozen(txq) ||
+		if (netif_tx_queue_frozen_or_stopped(txq) ||
 		    ops->ndo_start_xmit(skb, dev) != NETDEV_TX_OK) {
 			skb_queue_head(&npinfo->txq, skb);
 			__netif_tx_unlock(txq);
@@ -925,7 +923,7 @@ void __netpoll_cleanup(struct netpoll *np)
 
 		skb_queue_purge(&npinfo->arp_tx);
 		skb_queue_purge(&npinfo->txq);
-		cancel_rearming_delayed_work(&npinfo->tx_work);
+		cancel_delayed_work_sync(&npinfo->tx_work);
 
 		/* clean after last, unfinished work */
 		__skb_queue_purge(&npinfo->txq);
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 33bc3823ac6..a9e7fc4c461 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -378,6 +378,7 @@ struct pktgen_dev {
 
 	u16 queue_map_min;
 	u16 queue_map_max;
+	__u32 skb_priority;	/* skb priority field */
 	int node;               /* Memory node */
 
 #ifdef CONFIG_XFRM
@@ -394,6 +395,8 @@ struct pktgen_hdr {
 	__be32 tv_usec;
 };
 
+static bool pktgen_exiting __read_mostly;
+
 struct pktgen_thread {
 	spinlock_t if_lock;		/* for list of devices */
 	struct list_head if_list;	/* All device here */
@@ -547,6 +550,10 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
 		   pkt_dev->queue_map_min,
 		   pkt_dev->queue_map_max);
 
+	if (pkt_dev->skb_priority)
+		seq_printf(seq, "     skb_priority: %u\n",
+			   pkt_dev->skb_priority);
+
 	if (pkt_dev->flags & F_IPV6) {
 		char b1[128], b2[128], b3[128];
 		fmt_ip6(b1, pkt_dev->in6_saddr.s6_addr);
@@ -1711,6 +1718,18 @@ static ssize_t pktgen_if_write(struct file *file,
 		return count;
 	}
 
+	if (!strcmp(name, "skb_priority")) {
+		len = num_arg(&user_buffer[i], 9, &value);
+		if (len < 0)
+			return len;
+
+		i += len;
+		pkt_dev->skb_priority = value;
+		sprintf(pg_result, "OK: skb_priority=%i",
+			pkt_dev->skb_priority);
+		return count;
+	}
+
 	sprintf(pkt_dev->result, "No such parameter \"%s\"", name);
 	return -EINVAL;
 }
@@ -2641,6 +2660,7 @@ static struct sk_buff *fill_packet_ipv4(struct net_device *odev,
 		sprintf(pkt_dev->result, "No memory");
 		return NULL;
 	}
+	prefetchw(skb->data);
 
 	skb_reserve(skb, datalen);
 
@@ -2671,6 +2691,8 @@ static struct sk_buff *fill_packet_ipv4(struct net_device *odev,
 	skb->transport_header = skb->network_header + sizeof(struct iphdr);
 	skb_put(skb, sizeof(struct iphdr) + sizeof(struct udphdr));
 	skb_set_queue_mapping(skb, queue_map);
+	skb->priority = pkt_dev->skb_priority;
+
 	iph = ip_hdr(skb);
 	udph = udp_hdr(skb);
 
@@ -2986,6 +3008,7 @@ static struct sk_buff *fill_packet_ipv6(struct net_device *odev,
 		sprintf(pkt_dev->result, "No memory");
 		return NULL;
 	}
+	prefetchw(skb->data);
 
 	skb_reserve(skb, 16);
 
@@ -3016,6 +3039,7 @@ static struct sk_buff *fill_packet_ipv6(struct net_device *odev,
 	skb->transport_header = skb->network_header + sizeof(struct ipv6hdr);
 	skb_put(skb, sizeof(struct ipv6hdr) + sizeof(struct udphdr));
 	skb_set_queue_mapping(skb, queue_map);
+	skb->priority = pkt_dev->skb_priority;
 	iph = ipv6_hdr(skb);
 	udph = udp_hdr(skb);
 
@@ -3431,11 +3455,6 @@ static void pktgen_rem_thread(struct pktgen_thread *t)
 
 	remove_proc_entry(t->tsk->comm, pg_proc_dir);
 
-	mutex_lock(&pktgen_thread_lock);
-
-	list_del(&t->th_list);
-
-	mutex_unlock(&pktgen_thread_lock);
 }
 
 static void pktgen_resched(struct pktgen_dev *pkt_dev)
@@ -3510,7 +3529,7 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev)
 
 	__netif_tx_lock_bh(txq);
 
-	if (unlikely(netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq))) {
+	if (unlikely(netif_tx_queue_frozen_or_stopped(txq))) {
 		ret = NETDEV_TX_BUSY;
 		pkt_dev->last_ok = 0;
 		goto unlock;
@@ -3534,8 +3553,7 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev)
 		break;
 	default: /* Drivers are not supposed to return other values! */
 		if (net_ratelimit())
-			pr_info("pktgen: %s xmit error: %d\n",
-				pkt_dev->odevname, ret);
+			pr_info("%s xmit error: %d\n", pkt_dev->odevname, ret);
 		pkt_dev->errors++;
 		/* fallthru */
 	case NETDEV_TX_LOCKED:
@@ -3582,6 +3600,8 @@ static int pktgen_thread_worker(void *arg)
 		pkt_dev = next_to_run(t);
 
 		if (unlikely(!pkt_dev && t->control == 0)) {
+			if (pktgen_exiting)
+				break;
 			wait_event_interruptible_timeout(t->queue,
 							 t->control != 0,
 							 HZ/10);
@@ -3634,6 +3654,13 @@ static int pktgen_thread_worker(void *arg)
 	pr_debug("%s removing thread\n", t->tsk->comm);
 	pktgen_rem_thread(t);
 
+	/* Wait for kthread_stop */
+	while (!kthread_should_stop()) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule();
+	}
+	__set_current_state(TASK_RUNNING);
+
 	return 0;
 }
 
@@ -3908,6 +3935,7 @@ static void __exit pg_cleanup(void)
 	struct list_head *q, *n;
 
 	/* Stop all interfaces & threads */
+	pktgen_exiting = true;
 
 	list_for_each_safe(q, n, &pktgen_threads) {
 		t = list_entry(q, struct pktgen_thread, th_list);
diff --git a/net/core/request_sock.c b/net/core/request_sock.c
index 7552495aff7..182236b2510 100644
--- a/net/core/request_sock.c
+++ b/net/core/request_sock.c
@@ -33,6 +33,7 @@
  * Note : Dont forget somaxconn that may limit backlog too.
  */
 int sysctl_max_syn_backlog = 256;
+EXPORT_SYMBOL(sysctl_max_syn_backlog);
 
 int reqsk_queue_alloc(struct request_sock_queue *queue,
 		      unsigned int nr_table_entries)
@@ -45,9 +46,7 @@ int reqsk_queue_alloc(struct request_sock_queue *queue,
 	nr_table_entries = roundup_pow_of_two(nr_table_entries + 1);
 	lopt_size += nr_table_entries * sizeof(struct request_sock *);
 	if (lopt_size > PAGE_SIZE)
-		lopt = __vmalloc(lopt_size,
-			GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
-			PAGE_KERNEL);
+		lopt = vzalloc(lopt_size);
 	else
 		lopt = kzalloc(lopt_size, GFP_KERNEL);
 	if (lopt == NULL)
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 8121268ddbd..750db57f3bb 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -347,16 +347,106 @@ static size_t rtnl_link_get_size(const struct net_device *dev)
 	if (!ops)
 		return 0;
 
-	size = nlmsg_total_size(sizeof(struct nlattr)) + /* IFLA_LINKINFO */
-	       nlmsg_total_size(strlen(ops->kind) + 1);	 /* IFLA_INFO_KIND */
+	size = nla_total_size(sizeof(struct nlattr)) + /* IFLA_LINKINFO */
+	       nla_total_size(strlen(ops->kind) + 1);  /* IFLA_INFO_KIND */
 
 	if (ops->get_size)
 		/* IFLA_INFO_DATA + nested data */
-		size += nlmsg_total_size(sizeof(struct nlattr)) +
+		size += nla_total_size(sizeof(struct nlattr)) +
 			ops->get_size(dev);
 
 	if (ops->get_xstats_size)
-		size += ops->get_xstats_size(dev);	/* IFLA_INFO_XSTATS */
+		/* IFLA_INFO_XSTATS */
+		size += nla_total_size(ops->get_xstats_size(dev));
+
+	return size;
+}
+
+static LIST_HEAD(rtnl_af_ops);
+
+static const struct rtnl_af_ops *rtnl_af_lookup(const int family)
+{
+	const struct rtnl_af_ops *ops;
+
+	list_for_each_entry(ops, &rtnl_af_ops, list) {
+		if (ops->family == family)
+			return ops;
+	}
+
+	return NULL;
+}
+
+/**
+ * __rtnl_af_register - Register rtnl_af_ops with rtnetlink.
+ * @ops: struct rtnl_af_ops * to register
+ *
+ * The caller must hold the rtnl_mutex.
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int __rtnl_af_register(struct rtnl_af_ops *ops)
+{
+	list_add_tail(&ops->list, &rtnl_af_ops);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__rtnl_af_register);
+
+/**
+ * rtnl_af_register - Register rtnl_af_ops with rtnetlink.
+ * @ops: struct rtnl_af_ops * to register
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int rtnl_af_register(struct rtnl_af_ops *ops)
+{
+	int err;
+
+	rtnl_lock();
+	err = __rtnl_af_register(ops);
+	rtnl_unlock();
+	return err;
+}
+EXPORT_SYMBOL_GPL(rtnl_af_register);
+
+/**
+ * __rtnl_af_unregister - Unregister rtnl_af_ops from rtnetlink.
+ * @ops: struct rtnl_af_ops * to unregister
+ *
+ * The caller must hold the rtnl_mutex.
+ */
+void __rtnl_af_unregister(struct rtnl_af_ops *ops)
+{
+	list_del(&ops->list);
+}
+EXPORT_SYMBOL_GPL(__rtnl_af_unregister);
+
+/**
+ * rtnl_af_unregister - Unregister rtnl_af_ops from rtnetlink.
+ * @ops: struct rtnl_af_ops * to unregister
+ */
+void rtnl_af_unregister(struct rtnl_af_ops *ops)
+{
+	rtnl_lock();
+	__rtnl_af_unregister(ops);
+	rtnl_unlock();
+}
+EXPORT_SYMBOL_GPL(rtnl_af_unregister);
+
+static size_t rtnl_link_get_af_size(const struct net_device *dev)
+{
+	struct rtnl_af_ops *af_ops;
+	size_t size;
+
+	/* IFLA_AF_SPEC */
+	size = nla_total_size(sizeof(struct nlattr));
+
+	list_for_each_entry(af_ops, &rtnl_af_ops, list) {
+		if (af_ops->get_link_af_size) {
+			/* AF_* + nested data */
+			size += nla_total_size(sizeof(struct nlattr)) +
+				af_ops->get_link_af_size(dev);
+		}
+	}
 
 	return size;
 }
@@ -670,7 +760,8 @@ static noinline size_t if_nlmsg_size(const struct net_device *dev)
 	       + nla_total_size(4) /* IFLA_NUM_VF */
 	       + rtnl_vfinfo_size(dev) /* IFLA_VFINFO_LIST */
 	       + rtnl_port_size(dev) /* IFLA_VF_PORTS + IFLA_PORT_SELF */
-	       + rtnl_link_get_size(dev); /* IFLA_LINKINFO */
+	       + rtnl_link_get_size(dev) /* IFLA_LINKINFO */
+	       + rtnl_link_get_af_size(dev); /* IFLA_AF_SPEC */
 }
 
 static int rtnl_vf_ports_fill(struct sk_buff *skb, struct net_device *dev)
@@ -756,7 +847,8 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
 	struct nlmsghdr *nlh;
 	struct rtnl_link_stats64 temp;
 	const struct rtnl_link_stats64 *stats;
-	struct nlattr *attr;
+	struct nlattr *attr, *af_spec;
+	struct rtnl_af_ops *af_ops;
 
 	nlh = nlmsg_put(skb, pid, seq, type, sizeof(*ifm), flags);
 	if (nlh == NULL)
@@ -865,6 +957,36 @@ static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
 			goto nla_put_failure;
 	}
 
+	if (!(af_spec = nla_nest_start(skb, IFLA_AF_SPEC)))
+		goto nla_put_failure;
+
+	list_for_each_entry(af_ops, &rtnl_af_ops, list) {
+		if (af_ops->fill_link_af) {
+			struct nlattr *af;
+			int err;
+
+			if (!(af = nla_nest_start(skb, af_ops->family)))
+				goto nla_put_failure;
+
+			err = af_ops->fill_link_af(skb, dev);
+
+			/*
+			 * Caller may return ENODATA to indicate that there
+			 * was no data to be dumped. This is not an error, it
+			 * means we should trim the attribute header and
+			 * continue.
+			 */
+			if (err == -ENODATA)
+				nla_nest_cancel(skb, af);
+			else if (err < 0)
+				goto nla_put_failure;
+
+			nla_nest_end(skb, af);
+		}
+	}
+
+	nla_nest_end(skb, af_spec);
+
 	return nlmsg_end(skb, nlh);
 
 nla_put_failure:
@@ -923,6 +1045,7 @@ const struct nla_policy ifla_policy[IFLA_MAX+1] = {
 	[IFLA_VFINFO_LIST]	= {. type = NLA_NESTED },
 	[IFLA_VF_PORTS]		= { .type = NLA_NESTED },
 	[IFLA_PORT_SELF]	= { .type = NLA_NESTED },
+	[IFLA_AF_SPEC]		= { .type = NLA_NESTED },
 };
 EXPORT_SYMBOL(ifla_policy);
 
@@ -984,6 +1107,28 @@ static int validate_linkmsg(struct net_device *dev, struct nlattr *tb[])
 			return -EINVAL;
 	}
 
+	if (tb[IFLA_AF_SPEC]) {
+		struct nlattr *af;
+		int rem, err;
+
+		nla_for_each_nested(af, tb[IFLA_AF_SPEC], rem) {
+			const struct rtnl_af_ops *af_ops;
+
+			if (!(af_ops = rtnl_af_lookup(nla_type(af))))
+				return -EAFNOSUPPORT;
+
+			if (!af_ops->set_link_af)
+				return -EOPNOTSUPP;
+
+			if (af_ops->validate_link_af) {
+				err = af_ops->validate_link_af(dev,
+							tb[IFLA_AF_SPEC]);
+				if (err < 0)
+					return err;
+			}
+		}
+	}
+
 	return 0;
 }
 
@@ -1224,6 +1369,24 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm,
 			goto errout;
 		modified = 1;
 	}
+
+	if (tb[IFLA_AF_SPEC]) {
+		struct nlattr *af;
+		int rem;
+
+		nla_for_each_nested(af, tb[IFLA_AF_SPEC], rem) {
+			const struct rtnl_af_ops *af_ops;
+
+			if (!(af_ops = rtnl_af_lookup(nla_type(af))))
+				BUG();
+
+			err = af_ops->set_link_af(dev, af);
+			if (err < 0)
+				goto errout;
+
+			modified = 1;
+		}
+	}
 	err = 0;
 
 errout:
diff --git a/net/core/scm.c b/net/core/scm.c
index 413cab89017..bbe45445080 100644
--- a/net/core/scm.c
+++ b/net/core/scm.c
@@ -79,10 +79,11 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp)
 			return -ENOMEM;
 		*fplp = fpl;
 		fpl->count = 0;
+		fpl->max = SCM_MAX_FD;
 	}
 	fpp = &fpl->fp[fpl->count];
 
-	if (fpl->count + num > SCM_MAX_FD)
+	if (fpl->count + num > fpl->max)
 		return -EINVAL;
 
 	/*
@@ -331,11 +332,12 @@ struct scm_fp_list *scm_fp_dup(struct scm_fp_list *fpl)
 	if (!fpl)
 		return NULL;
 
-	new_fpl = kmalloc(sizeof(*fpl), GFP_KERNEL);
+	new_fpl = kmemdup(fpl, offsetof(struct scm_fp_list, fp[fpl->count]),
+			  GFP_KERNEL);
 	if (new_fpl) {
-		for (i=fpl->count-1; i>=0; i--)
+		for (i = 0; i < fpl->count; i++)
 			get_file(fpl->fp[i]);
-		memcpy(new_fpl, fpl, sizeof(*fpl));
+		new_fpl->max = new_fpl->count;
 	}
 	return new_fpl;
 }
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 74ebf4b5258..d31bb36ae0d 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -780,6 +780,28 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
 
 	size = SKB_DATA_ALIGN(size);
 
+	/* Check if we can avoid taking references on fragments if we own
+	 * the last reference on skb->head. (see skb_release_data())
+	 */
+	if (!skb->cloned)
+		fastpath = true;
+	else {
+		int delta = skb->nohdr ? (1 << SKB_DATAREF_SHIFT) + 1 : 1;
+
+		fastpath = atomic_read(&skb_shinfo(skb)->dataref) == delta;
+	}
+
+	if (fastpath &&
+	    size + sizeof(struct skb_shared_info) <= ksize(skb->head)) {
+		memmove(skb->head + size, skb_shinfo(skb),
+			offsetof(struct skb_shared_info,
+				 frags[skb_shinfo(skb)->nr_frags]));
+		memmove(skb->head + nhead, skb->head,
+			skb_tail_pointer(skb) - skb->head);
+		off = nhead;
+		goto adjust_others;
+	}
+
 	data = kmalloc(size + sizeof(struct skb_shared_info), gfp_mask);
 	if (!data)
 		goto nodata;
@@ -793,17 +815,6 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
 	       skb_shinfo(skb),
 	       offsetof(struct skb_shared_info, frags[skb_shinfo(skb)->nr_frags]));
 
-	/* Check if we can avoid taking references on fragments if we own
-	 * the last reference on skb->head. (see skb_release_data())
-	 */
-	if (!skb->cloned)
-		fastpath = true;
-	else {
-		int delta = skb->nohdr ? (1 << SKB_DATAREF_SHIFT) + 1 : 1;
-
-		fastpath = atomic_read(&skb_shinfo(skb)->dataref) == delta;
-	}
-
 	if (fastpath) {
 		kfree(skb->head);
 	} else {
@@ -818,6 +829,7 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
 	off = (data + nhead) - skb->head;
 
 	skb->head     = data;
+adjust_others:
 	skb->data    += off;
 #ifdef NET_SKBUFF_DATA_USES_OFFSET
 	skb->end      = size;
@@ -1814,7 +1826,7 @@ void skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to)
 	long csstart;
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL)
-		csstart = skb->csum_start - skb_headroom(skb);
+		csstart = skb_checksum_start_offset(skb);
 	else
 		csstart = skb_headlen(skb);
 
diff --git a/net/core/sock.c b/net/core/sock.c
index 3eed5424e65..a658aeb6d55 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -992,23 +992,54 @@ static inline void sock_lock_init(struct sock *sk)
 /*
  * Copy all fields from osk to nsk but nsk->sk_refcnt must not change yet,
  * even temporarly, because of RCU lookups. sk_node should also be left as is.
+ * We must not copy fields between sk_dontcopy_begin and sk_dontcopy_end
  */
 static void sock_copy(struct sock *nsk, const struct sock *osk)
 {
 #ifdef CONFIG_SECURITY_NETWORK
 	void *sptr = nsk->sk_security;
 #endif
-	BUILD_BUG_ON(offsetof(struct sock, sk_copy_start) !=
-		     sizeof(osk->sk_node) + sizeof(osk->sk_refcnt) +
-		     sizeof(osk->sk_tx_queue_mapping));
-	memcpy(&nsk->sk_copy_start, &osk->sk_copy_start,
-	       osk->sk_prot->obj_size - offsetof(struct sock, sk_copy_start));
+	memcpy(nsk, osk, offsetof(struct sock, sk_dontcopy_begin));
+
+	memcpy(&nsk->sk_dontcopy_end, &osk->sk_dontcopy_end,
+	       osk->sk_prot->obj_size - offsetof(struct sock, sk_dontcopy_end));
+
 #ifdef CONFIG_SECURITY_NETWORK
 	nsk->sk_security = sptr;
 	security_sk_clone(osk, nsk);
 #endif
 }
 
+/*
+ * caches using SLAB_DESTROY_BY_RCU should let .next pointer from nulls nodes
+ * un-modified. Special care is taken when initializing object to zero.
+ */
+static inline void sk_prot_clear_nulls(struct sock *sk, int size)
+{
+	if (offsetof(struct sock, sk_node.next) != 0)
+		memset(sk, 0, offsetof(struct sock, sk_node.next));
+	memset(&sk->sk_node.pprev, 0,
+	       size - offsetof(struct sock, sk_node.pprev));
+}
+
+void sk_prot_clear_portaddr_nulls(struct sock *sk, int size)
+{
+	unsigned long nulls1, nulls2;
+
+	nulls1 = offsetof(struct sock, __sk_common.skc_node.next);
+	nulls2 = offsetof(struct sock, __sk_common.skc_portaddr_node.next);
+	if (nulls1 > nulls2)
+		swap(nulls1, nulls2);
+
+	if (nulls1 != 0)
+		memset((char *)sk, 0, nulls1);
+	memset((char *)sk + nulls1 + sizeof(void *), 0,
+	       nulls2 - nulls1 - sizeof(void *));
+	memset((char *)sk + nulls2 + sizeof(void *), 0,
+	       size - nulls2 - sizeof(void *));
+}
+EXPORT_SYMBOL(sk_prot_clear_portaddr_nulls);
+
 static struct sock *sk_prot_alloc(struct proto *prot, gfp_t priority,
 		int family)
 {
@@ -1021,19 +1052,12 @@ static struct sock *sk_prot_alloc(struct proto *prot, gfp_t priority,
 		if (!sk)
 			return sk;
 		if (priority & __GFP_ZERO) {
-			/*
-			 * caches using SLAB_DESTROY_BY_RCU should let
-			 * sk_node.next un-modified. Special care is taken
-			 * when initializing object to zero.
-			 */
-			if (offsetof(struct sock, sk_node.next) != 0)
-				memset(sk, 0, offsetof(struct sock, sk_node.next));
-			memset(&sk->sk_node.pprev, 0,
-			       prot->obj_size - offsetof(struct sock,
-							 sk_node.pprev));
+			if (prot->clear_sk)
+				prot->clear_sk(sk, prot->obj_size);
+			else
+				sk_prot_clear_nulls(sk, prot->obj_size);
 		}
-	}
-	else
+	} else
 		sk = kmalloc(prot->obj_size, priority);
 
 	if (sk != NULL) {
@@ -1653,10 +1677,10 @@ int __sk_mem_schedule(struct sock *sk, int size, int kind)
 {
 	struct proto *prot = sk->sk_prot;
 	int amt = sk_mem_pages(size);
-	int allocated;
+	long allocated;
 
 	sk->sk_forward_alloc += amt * SK_MEM_QUANTUM;
-	allocated = atomic_add_return(amt, prot->memory_allocated);
+	allocated = atomic_long_add_return(amt, prot->memory_allocated);
 
 	/* Under limit. */
 	if (allocated <= prot->sysctl_mem[0]) {
@@ -1714,7 +1738,7 @@ suppress_allocation:
 
 	/* Alas. Undo changes. */
 	sk->sk_forward_alloc -= amt * SK_MEM_QUANTUM;
-	atomic_sub(amt, prot->memory_allocated);
+	atomic_long_sub(amt, prot->memory_allocated);
 	return 0;
 }
 EXPORT_SYMBOL(__sk_mem_schedule);
@@ -1727,12 +1751,12 @@ void __sk_mem_reclaim(struct sock *sk)
 {
 	struct proto *prot = sk->sk_prot;
 
-	atomic_sub(sk->sk_forward_alloc >> SK_MEM_QUANTUM_SHIFT,
+	atomic_long_sub(sk->sk_forward_alloc >> SK_MEM_QUANTUM_SHIFT,
 		   prot->memory_allocated);
 	sk->sk_forward_alloc &= SK_MEM_QUANTUM - 1;
 
 	if (prot->memory_pressure && *prot->memory_pressure &&
-	    (atomic_read(prot->memory_allocated) < prot->sysctl_mem[0]))
+	    (atomic_long_read(prot->memory_allocated) < prot->sysctl_mem[0]))
 		*prot->memory_pressure = 0;
 }
 EXPORT_SYMBOL(__sk_mem_reclaim);
@@ -1884,7 +1908,7 @@ static void sock_def_readable(struct sock *sk, int len)
 	rcu_read_lock();
 	wq = rcu_dereference(sk->sk_wq);
 	if (wq_has_sleeper(wq))
-		wake_up_interruptible_sync_poll(&wq->wait, POLLIN |
+		wake_up_interruptible_sync_poll(&wq->wait, POLLIN | POLLPRI |
 						POLLRDNORM | POLLRDBAND);
 	sk_wake_async(sk, SOCK_WAKE_WAITD, POLL_IN);
 	rcu_read_unlock();
@@ -2452,12 +2476,12 @@ static char proto_method_implemented(const void *method)
 
 static void proto_seq_printf(struct seq_file *seq, struct proto *proto)
 {
-	seq_printf(seq, "%-9s %4u %6d  %6d   %-3s %6u   %-3s  %-10s "
+	seq_printf(seq, "%-9s %4u %6d  %6ld   %-3s %6u   %-3s  %-10s "
 			"%2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c %2c\n",
 		   proto->name,
 		   proto->obj_size,
 		   sock_prot_inuse_get(seq_file_net(seq), proto),
-		   proto->memory_allocated != NULL ? atomic_read(proto->memory_allocated) : -1,
+		   proto->memory_allocated != NULL ? atomic_long_read(proto->memory_allocated) : -1L,
 		   proto->memory_pressure != NULL ? *proto->memory_pressure ? "yes" : "no" : "NI",
 		   proto->max_header,
 		   proto->slab == NULL ? "no" : "yes",
diff --git a/net/core/timestamping.c b/net/core/timestamping.c
index 0ae6c22da85..7e7ca375d43 100644
--- a/net/core/timestamping.c
+++ b/net/core/timestamping.c
@@ -26,12 +26,12 @@ static struct sock_filter ptp_filter[] = {
 	PTP_FILTER
 };
 
-static unsigned int classify(struct sk_buff *skb)
+static unsigned int classify(const struct sk_buff *skb)
 {
 	if (likely(skb->dev &&
 		   skb->dev->phydev &&
 		   skb->dev->phydev->drv))
-		return sk_run_filter(skb, ptp_filter, ARRAY_SIZE(ptp_filter));
+		return sk_run_filter(skb, ptp_filter);
 	else
 		return PTP_CLASS_NONE;
 }
@@ -96,11 +96,13 @@ bool skb_defer_rx_timestamp(struct sk_buff *skb)
 	struct phy_device *phydev;
 	unsigned int type;
 
-	skb_push(skb, ETH_HLEN);
+	if (skb_headroom(skb) < ETH_HLEN)
+		return false;
+	__skb_push(skb, ETH_HLEN);
 
 	type = classify(skb);
 
-	skb_pull(skb, ETH_HLEN);
+	__skb_pull(skb, ETH_HLEN);
 
 	switch (type) {
 	case PTP_CLASS_V1_IPV4:
diff --git a/net/dcb/Makefile b/net/dcb/Makefile
index 9930f4cde81..c1282c9e64f 100644
--- a/net/dcb/Makefile
+++ b/net/dcb/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_DCB) += dcbnl.o
+obj-$(CONFIG_DCB) += dcbnl.o dcbevent.o
diff --git a/net/dcb/dcbevent.c b/net/dcb/dcbevent.c
new file mode 100644
index 00000000000..665a8802105
--- /dev/null
+++ b/net/dcb/dcbevent.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2010, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Author: John Fastabend <john.r.fastabend@intel.com>
+ */
+
+#include <linux/rtnetlink.h>
+#include <linux/notifier.h>
+
+static ATOMIC_NOTIFIER_HEAD(dcbevent_notif_chain);
+
+int register_dcbevent_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_register(&dcbevent_notif_chain, nb);
+}
+EXPORT_SYMBOL(register_dcbevent_notifier);
+
+int unregister_dcbevent_notifier(struct notifier_block *nb)
+{
+	return atomic_notifier_chain_unregister(&dcbevent_notif_chain, nb);
+}
+EXPORT_SYMBOL(unregister_dcbevent_notifier);
+
+int call_dcbevent_notifiers(unsigned long val, void *v)
+{
+	return atomic_notifier_call_chain(&dcbevent_notif_chain, val, v);
+}
diff --git a/net/dcb/dcbnl.c b/net/dcb/dcbnl.c
index 19ac2b98548..d900ab99814 100644
--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -23,6 +23,7 @@
 #include <net/netlink.h>
 #include <net/rtnetlink.h>
 #include <linux/dcbnl.h>
+#include <net/dcbevent.h>
 #include <linux/rtnetlink.h>
 #include <net/sock.h>
 
@@ -66,6 +67,9 @@ static const struct nla_policy dcbnl_rtnl_policy[DCB_ATTR_MAX + 1] = {
 	[DCB_ATTR_PFC_STATE]   = {.type = NLA_U8},
 	[DCB_ATTR_BCN]         = {.type = NLA_NESTED},
 	[DCB_ATTR_APP]         = {.type = NLA_NESTED},
+	[DCB_ATTR_IEEE]	       = {.type = NLA_NESTED},
+	[DCB_ATTR_DCBX]        = {.type = NLA_U8},
+	[DCB_ATTR_FEATCFG]     = {.type = NLA_NESTED},
 };
 
 /* DCB priority flow control to User Priority nested attributes */
@@ -122,6 +126,7 @@ static const struct nla_policy dcbnl_cap_nest[DCB_CAP_ATTR_MAX + 1] = {
 	[DCB_CAP_ATTR_PFC_TCS] = {.type = NLA_U8},
 	[DCB_CAP_ATTR_GSP]     = {.type = NLA_U8},
 	[DCB_CAP_ATTR_BCN]     = {.type = NLA_U8},
+	[DCB_CAP_ATTR_DCBX]    = {.type = NLA_U8},
 };
 
 /* DCB capabilities nested attributes. */
@@ -167,6 +172,28 @@ static const struct nla_policy dcbnl_app_nest[DCB_APP_ATTR_MAX + 1] = {
 	[DCB_APP_ATTR_PRIORITY]     = {.type = NLA_U8},
 };
 
+/* IEEE 802.1Qaz nested attributes. */
+static const struct nla_policy dcbnl_ieee_policy[DCB_ATTR_IEEE_MAX + 1] = {
+	[DCB_ATTR_IEEE_ETS]	    = {.len = sizeof(struct ieee_ets)},
+	[DCB_ATTR_IEEE_PFC]	    = {.len = sizeof(struct ieee_pfc)},
+	[DCB_ATTR_IEEE_APP_TABLE]   = {.type = NLA_NESTED},
+};
+
+static const struct nla_policy dcbnl_ieee_app[DCB_ATTR_IEEE_APP_MAX + 1] = {
+	[DCB_ATTR_IEEE_APP]	    = {.len = sizeof(struct dcb_app)},
+};
+
+/* DCB number of traffic classes nested attributes. */
+static const struct nla_policy dcbnl_featcfg_nest[DCB_FEATCFG_ATTR_MAX + 1] = {
+	[DCB_FEATCFG_ATTR_ALL]      = {.type = NLA_FLAG},
+	[DCB_FEATCFG_ATTR_PG]       = {.type = NLA_U8},
+	[DCB_FEATCFG_ATTR_PFC]      = {.type = NLA_U8},
+	[DCB_FEATCFG_ATTR_APP]      = {.type = NLA_U8},
+};
+
+static LIST_HEAD(dcb_app_list);
+static DEFINE_SPINLOCK(dcb_lock);
+
 /* standard netlink reply call */
 static int dcbnl_reply(u8 value, u8 event, u8 cmd, u8 attr, u32 pid,
                        u32 seq, u16 flags)
@@ -622,12 +649,12 @@ out:
 static int dcbnl_setapp(struct net_device *netdev, struct nlattr **tb,
                         u32 pid, u32 seq, u16 flags)
 {
-	int ret = -EINVAL;
+	int err, ret = -EINVAL;
 	u16 id;
 	u8 up, idtype;
 	struct nlattr *app_tb[DCB_APP_ATTR_MAX + 1];
 
-	if (!tb[DCB_ATTR_APP] || !netdev->dcbnl_ops->setapp)
+	if (!tb[DCB_ATTR_APP])
 		goto out;
 
 	ret = nla_parse_nested(app_tb, DCB_APP_ATTR_MAX, tb[DCB_ATTR_APP],
@@ -651,9 +678,18 @@ static int dcbnl_setapp(struct net_device *netdev, struct nlattr **tb,
 	id = nla_get_u16(app_tb[DCB_APP_ATTR_ID]);
 	up = nla_get_u8(app_tb[DCB_APP_ATTR_PRIORITY]);
 
-	ret = dcbnl_reply(netdev->dcbnl_ops->setapp(netdev, idtype, id, up),
-	                  RTM_SETDCB, DCB_CMD_SAPP, DCB_ATTR_APP,
-	                  pid, seq, flags);
+	if (netdev->dcbnl_ops->setapp) {
+		err = netdev->dcbnl_ops->setapp(netdev, idtype, id, up);
+	} else {
+		struct dcb_app app;
+		app.selector = idtype;
+		app.protocol = id;
+		app.priority = up;
+		err = dcb_setapp(netdev, &app);
+	}
+
+	ret = dcbnl_reply(err, RTM_SETDCB, DCB_CMD_SAPP, DCB_ATTR_APP,
+			  pid, seq, flags);
 out:
 	return ret;
 }
@@ -1118,6 +1154,281 @@ err:
 	return ret;
 }
 
+/* Handle IEEE 802.1Qaz SET commands. If any requested operation can not
+ * be completed the entire msg is aborted and error value is returned.
+ * No attempt is made to reconcile the case where only part of the
+ * cmd can be completed.
+ */
+static int dcbnl_ieee_set(struct net_device *netdev, struct nlattr **tb,
+			  u32 pid, u32 seq, u16 flags)
+{
+	const struct dcbnl_rtnl_ops *ops = netdev->dcbnl_ops;
+	struct nlattr *ieee[DCB_ATTR_IEEE_MAX + 1];
+	int err = -EOPNOTSUPP;
+
+	if (!ops)
+		goto err;
+
+	err = nla_parse_nested(ieee, DCB_ATTR_IEEE_MAX,
+			       tb[DCB_ATTR_IEEE], dcbnl_ieee_policy);
+	if (err)
+		goto err;
+
+	if (ieee[DCB_ATTR_IEEE_ETS] && ops->ieee_setets) {
+		struct ieee_ets *ets = nla_data(ieee[DCB_ATTR_IEEE_ETS]);
+		err = ops->ieee_setets(netdev, ets);
+		if (err)
+			goto err;
+	}
+
+	if (ieee[DCB_ATTR_IEEE_PFC] && ops->ieee_setets) {
+		struct ieee_pfc *pfc = nla_data(ieee[DCB_ATTR_IEEE_PFC]);
+		err = ops->ieee_setpfc(netdev, pfc);
+		if (err)
+			goto err;
+	}
+
+	if (ieee[DCB_ATTR_IEEE_APP_TABLE]) {
+		struct nlattr *attr;
+		int rem;
+
+		nla_for_each_nested(attr, ieee[DCB_ATTR_IEEE_APP_TABLE], rem) {
+			struct dcb_app *app_data;
+			if (nla_type(attr) != DCB_ATTR_IEEE_APP)
+				continue;
+			app_data = nla_data(attr);
+			if (ops->ieee_setapp)
+				err = ops->ieee_setapp(netdev, app_data);
+			else
+				err = dcb_setapp(netdev, app_data);
+			if (err)
+				goto err;
+		}
+	}
+
+err:
+	dcbnl_reply(err, RTM_SETDCB, DCB_CMD_IEEE_SET, DCB_ATTR_IEEE,
+		    pid, seq, flags);
+	return err;
+}
+
+
+/* Handle IEEE 802.1Qaz GET commands. */
+static int dcbnl_ieee_get(struct net_device *netdev, struct nlattr **tb,
+			  u32 pid, u32 seq, u16 flags)
+{
+	struct sk_buff *skb;
+	struct nlmsghdr *nlh;
+	struct dcbmsg *dcb;
+	struct nlattr *ieee, *app;
+	struct dcb_app_type *itr;
+	const struct dcbnl_rtnl_ops *ops = netdev->dcbnl_ops;
+	int err;
+
+	if (!ops)
+		return -EOPNOTSUPP;
+
+	skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!skb)
+		return -ENOBUFS;
+
+	nlh = NLMSG_NEW(skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
+
+	dcb = NLMSG_DATA(nlh);
+	dcb->dcb_family = AF_UNSPEC;
+	dcb->cmd = DCB_CMD_IEEE_GET;
+
+	NLA_PUT_STRING(skb, DCB_ATTR_IFNAME, netdev->name);
+
+	ieee = nla_nest_start(skb, DCB_ATTR_IEEE);
+	if (!ieee)
+		goto nla_put_failure;
+
+	if (ops->ieee_getets) {
+		struct ieee_ets ets;
+		err = ops->ieee_getets(netdev, &ets);
+		if (!err)
+			NLA_PUT(skb, DCB_ATTR_IEEE_ETS, sizeof(ets), &ets);
+	}
+
+	if (ops->ieee_getpfc) {
+		struct ieee_pfc pfc;
+		err = ops->ieee_getpfc(netdev, &pfc);
+		if (!err)
+			NLA_PUT(skb, DCB_ATTR_IEEE_PFC, sizeof(pfc), &pfc);
+	}
+
+	app = nla_nest_start(skb, DCB_ATTR_IEEE_APP_TABLE);
+	if (!app)
+		goto nla_put_failure;
+
+	spin_lock(&dcb_lock);
+	list_for_each_entry(itr, &dcb_app_list, list) {
+		if (strncmp(itr->name, netdev->name, IFNAMSIZ) == 0) {
+			err = nla_put(skb, DCB_ATTR_IEEE_APP, sizeof(itr->app),
+					 &itr->app);
+			if (err) {
+				spin_unlock(&dcb_lock);
+				goto nla_put_failure;
+			}
+		}
+	}
+	spin_unlock(&dcb_lock);
+	nla_nest_end(skb, app);
+
+	nla_nest_end(skb, ieee);
+	nlmsg_end(skb, nlh);
+
+	return rtnl_unicast(skb, &init_net, pid);
+nla_put_failure:
+	nlmsg_cancel(skb, nlh);
+nlmsg_failure:
+	kfree_skb(skb);
+	return -1;
+}
+
+/* DCBX configuration */
+static int dcbnl_getdcbx(struct net_device *netdev, struct nlattr **tb,
+			 u32 pid, u32 seq, u16 flags)
+{
+	int ret;
+
+	if (!netdev->dcbnl_ops->getdcbx)
+		return -EOPNOTSUPP;
+
+	ret = dcbnl_reply(netdev->dcbnl_ops->getdcbx(netdev), RTM_GETDCB,
+			  DCB_CMD_GDCBX, DCB_ATTR_DCBX, pid, seq, flags);
+
+	return ret;
+}
+
+static int dcbnl_setdcbx(struct net_device *netdev, struct nlattr **tb,
+			 u32 pid, u32 seq, u16 flags)
+{
+	int ret;
+	u8 value;
+
+	if (!netdev->dcbnl_ops->setdcbx)
+		return -EOPNOTSUPP;
+
+	if (!tb[DCB_ATTR_DCBX])
+		return -EINVAL;
+
+	value = nla_get_u8(tb[DCB_ATTR_DCBX]);
+
+	ret = dcbnl_reply(netdev->dcbnl_ops->setdcbx(netdev, value),
+			  RTM_SETDCB, DCB_CMD_SDCBX, DCB_ATTR_DCBX,
+			  pid, seq, flags);
+
+	return ret;
+}
+
+static int dcbnl_getfeatcfg(struct net_device *netdev, struct nlattr **tb,
+			    u32 pid, u32 seq, u16 flags)
+{
+	struct sk_buff *dcbnl_skb;
+	struct nlmsghdr *nlh;
+	struct dcbmsg *dcb;
+	struct nlattr *data[DCB_FEATCFG_ATTR_MAX + 1], *nest;
+	u8 value;
+	int ret, i;
+	int getall = 0;
+
+	if (!netdev->dcbnl_ops->getfeatcfg)
+		return -EOPNOTSUPP;
+
+	if (!tb[DCB_ATTR_FEATCFG])
+		return -EINVAL;
+
+	ret = nla_parse_nested(data, DCB_FEATCFG_ATTR_MAX, tb[DCB_ATTR_FEATCFG],
+			       dcbnl_featcfg_nest);
+	if (ret)
+		goto err_out;
+
+	dcbnl_skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
+	if (!dcbnl_skb) {
+		ret = -ENOBUFS;
+		goto err_out;
+	}
+
+	nlh = NLMSG_NEW(dcbnl_skb, pid, seq, RTM_GETDCB, sizeof(*dcb), flags);
+
+	dcb = NLMSG_DATA(nlh);
+	dcb->dcb_family = AF_UNSPEC;
+	dcb->cmd = DCB_CMD_GFEATCFG;
+
+	nest = nla_nest_start(dcbnl_skb, DCB_ATTR_FEATCFG);
+	if (!nest) {
+		ret = -EMSGSIZE;
+		goto nla_put_failure;
+	}
+
+	if (data[DCB_FEATCFG_ATTR_ALL])
+		getall = 1;
+
+	for (i = DCB_FEATCFG_ATTR_ALL+1; i <= DCB_FEATCFG_ATTR_MAX; i++) {
+		if (!getall && !data[i])
+			continue;
+
+		ret = netdev->dcbnl_ops->getfeatcfg(netdev, i, &value);
+		if (!ret)
+			ret = nla_put_u8(dcbnl_skb, i, value);
+
+		if (ret) {
+			nla_nest_cancel(dcbnl_skb, nest);
+			goto nla_put_failure;
+		}
+	}
+	nla_nest_end(dcbnl_skb, nest);
+
+	nlmsg_end(dcbnl_skb, nlh);
+
+	return rtnl_unicast(dcbnl_skb, &init_net, pid);
+nla_put_failure:
+	nlmsg_cancel(dcbnl_skb, nlh);
+nlmsg_failure:
+	kfree_skb(dcbnl_skb);
+err_out:
+	return ret;
+}
+
+static int dcbnl_setfeatcfg(struct net_device *netdev, struct nlattr **tb,
+			    u32 pid, u32 seq, u16 flags)
+{
+	struct nlattr *data[DCB_FEATCFG_ATTR_MAX + 1];
+	int ret, i;
+	u8 value;
+
+	if (!netdev->dcbnl_ops->setfeatcfg)
+		return -ENOTSUPP;
+
+	if (!tb[DCB_ATTR_FEATCFG])
+		return -EINVAL;
+
+	ret = nla_parse_nested(data, DCB_FEATCFG_ATTR_MAX, tb[DCB_ATTR_FEATCFG],
+			       dcbnl_featcfg_nest);
+
+	if (ret)
+		goto err;
+
+	for (i = DCB_FEATCFG_ATTR_ALL+1; i <= DCB_FEATCFG_ATTR_MAX; i++) {
+		if (data[i] == NULL)
+			continue;
+
+		value = nla_get_u8(data[i]);
+
+		ret = netdev->dcbnl_ops->setfeatcfg(netdev, i, value);
+
+		if (ret)
+			goto err;
+	}
+err:
+	dcbnl_reply(ret, RTM_SETDCB, DCB_CMD_SFEATCFG, DCB_ATTR_FEATCFG,
+		    pid, seq, flags);
+
+	return ret;
+}
+
 static int dcb_doit(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 {
 	struct net *net = sock_net(skb->sk);
@@ -1223,6 +1534,30 @@ static int dcb_doit(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
 		ret = dcbnl_setapp(netdev, tb, pid, nlh->nlmsg_seq,
 		                   nlh->nlmsg_flags);
 		goto out;
+	case DCB_CMD_IEEE_SET:
+		ret = dcbnl_ieee_set(netdev, tb, pid, nlh->nlmsg_seq,
+				 nlh->nlmsg_flags);
+		goto out;
+	case DCB_CMD_IEEE_GET:
+		ret = dcbnl_ieee_get(netdev, tb, pid, nlh->nlmsg_seq,
+				 nlh->nlmsg_flags);
+		goto out;
+	case DCB_CMD_GDCBX:
+		ret = dcbnl_getdcbx(netdev, tb, pid, nlh->nlmsg_seq,
+				    nlh->nlmsg_flags);
+		goto out;
+	case DCB_CMD_SDCBX:
+		ret = dcbnl_setdcbx(netdev, tb, pid, nlh->nlmsg_seq,
+				    nlh->nlmsg_flags);
+		goto out;
+	case DCB_CMD_GFEATCFG:
+		ret = dcbnl_getfeatcfg(netdev, tb, pid, nlh->nlmsg_seq,
+				       nlh->nlmsg_flags);
+		goto out;
+	case DCB_CMD_SFEATCFG:
+		ret = dcbnl_setfeatcfg(netdev, tb, pid, nlh->nlmsg_seq,
+				       nlh->nlmsg_flags);
+		goto out;
 	default:
 		goto errout;
 	}
@@ -1233,8 +1568,95 @@ out:
 	return ret;
 }
 
+/**
+ * dcb_getapp - retrieve the DCBX application user priority
+ *
+ * On success returns a non-zero 802.1p user priority bitmap
+ * otherwise returns 0 as the invalid user priority bitmap to
+ * indicate an error.
+ */
+u8 dcb_getapp(struct net_device *dev, struct dcb_app *app)
+{
+	struct dcb_app_type *itr;
+	u8 prio = 0;
+
+	spin_lock(&dcb_lock);
+	list_for_each_entry(itr, &dcb_app_list, list) {
+		if (itr->app.selector == app->selector &&
+		    itr->app.protocol == app->protocol &&
+		    (strncmp(itr->name, dev->name, IFNAMSIZ) == 0)) {
+			prio = itr->app.priority;
+			break;
+		}
+	}
+	spin_unlock(&dcb_lock);
+
+	return prio;
+}
+EXPORT_SYMBOL(dcb_getapp);
+
+/**
+ * ixgbe_dcbnl_setapp - add dcb application data to app list
+ *
+ * Priority 0 is the default priority this removes applications
+ * from the app list if the priority is set to zero.
+ */
+u8 dcb_setapp(struct net_device *dev, struct dcb_app *new)
+{
+	struct dcb_app_type *itr;
+
+	spin_lock(&dcb_lock);
+	/* Search for existing match and replace */
+	list_for_each_entry(itr, &dcb_app_list, list) {
+		if (itr->app.selector == new->selector &&
+		    itr->app.protocol == new->protocol &&
+		    (strncmp(itr->name, dev->name, IFNAMSIZ) == 0)) {
+			if (new->priority)
+				itr->app.priority = new->priority;
+			else {
+				list_del(&itr->list);
+				kfree(itr);
+			}
+			goto out;
+		}
+	}
+	/* App type does not exist add new application type */
+	if (new->priority) {
+		struct dcb_app_type *entry;
+		entry = kmalloc(sizeof(struct dcb_app_type), GFP_ATOMIC);
+		if (!entry) {
+			spin_unlock(&dcb_lock);
+			return -ENOMEM;
+		}
+
+		memcpy(&entry->app, new, sizeof(*new));
+		strncpy(entry->name, dev->name, IFNAMSIZ);
+		list_add(&entry->list, &dcb_app_list);
+	}
+out:
+	spin_unlock(&dcb_lock);
+	call_dcbevent_notifiers(DCB_APP_EVENT, new);
+	return 0;
+}
+EXPORT_SYMBOL(dcb_setapp);
+
+static void dcb_flushapp(void)
+{
+	struct dcb_app_type *app;
+	struct dcb_app_type *tmp;
+
+	spin_lock(&dcb_lock);
+	list_for_each_entry_safe(app, tmp, &dcb_app_list, list) {
+		list_del(&app->list);
+		kfree(app);
+	}
+	spin_unlock(&dcb_lock);
+}
+
 static int __init dcbnl_init(void)
 {
+	INIT_LIST_HEAD(&dcb_app_list);
+
 	rtnl_register(PF_UNSPEC, RTM_GETDCB, dcb_doit, NULL);
 	rtnl_register(PF_UNSPEC, RTM_SETDCB, dcb_doit, NULL);
 
@@ -1246,7 +1668,6 @@ static void __exit dcbnl_exit(void)
 {
 	rtnl_unregister(PF_UNSPEC, RTM_GETDCB);
 	rtnl_unregister(PF_UNSPEC, RTM_SETDCB);
+	dcb_flushapp();
 }
 module_exit(dcbnl_exit);
-
-
diff --git a/net/dccp/Makefile b/net/dccp/Makefile
index 2991efcc8de..5c8362b037e 100644
--- a/net/dccp/Makefile
+++ b/net/dccp/Makefile
@@ -1,7 +1,7 @@
 obj-$(CONFIG_IP_DCCP) += dccp.o dccp_ipv4.o
 
-dccp-y := ccid.o feat.o input.o minisocks.o options.o output.o proto.o timer.o
-
+dccp-y := ccid.o feat.o input.o minisocks.o options.o output.o proto.o timer.o \
+	  qpolicy.o
 #
 # CCID algorithms to be used by dccp.ko
 #
diff --git a/net/dccp/ackvec.c b/net/dccp/ackvec.c
index abaf241c735..25b7a8d1ad5 100644
--- a/net/dccp/ackvec.c
+++ b/net/dccp/ackvec.c
@@ -9,18 +9,10 @@
  *      under the terms of the GNU General Public License as published by the
  *      Free Software Foundation; version 2 of the License;
  */
-
-#include "ackvec.h"
 #include "dccp.h"
-
-#include <linux/init.h>
-#include <linux/errno.h>
 #include <linux/kernel.h>
-#include <linux/skbuff.h>
 #include <linux/slab.h>
 
-#include <net/sock.h>
-
 static struct kmem_cache *dccp_ackvec_slab;
 static struct kmem_cache *dccp_ackvec_record_slab;
 
@@ -92,6 +84,24 @@ int dccp_ackvec_update_records(struct dccp_ackvec *av, u64 seqno, u8 nonce_sum)
 	return 0;
 }
 
+static struct dccp_ackvec_record *dccp_ackvec_lookup(struct list_head *av_list,
+						     const u64 ackno)
+{
+	struct dccp_ackvec_record *avr;
+	/*
+	 * Exploit that records are inserted in descending order of sequence
+	 * number, start with the oldest record first. If @ackno is `before'
+	 * the earliest ack_ackno, the packet is too old to be considered.
+	 */
+	list_for_each_entry_reverse(avr, av_list, avr_node) {
+		if (avr->avr_ack_seqno == ackno)
+			return avr;
+		if (before48(ackno, avr->avr_ack_seqno))
+			break;
+	}
+	return NULL;
+}
+
 /*
  * Buffer index and length computation using modulo-buffersize arithmetic.
  * Note that, as pointers move from right to left, head is `before' tail.
@@ -113,248 +123,253 @@ u16 dccp_ackvec_buflen(const struct dccp_ackvec *av)
 	return __ackvec_idx_sub(av->av_buf_tail, av->av_buf_head);
 }
 
-/*
- * If several packets are missing, the HC-Receiver may prefer to enter multiple
- * bytes with run length 0, rather than a single byte with a larger run length;
- * this simplifies table updates if one of the missing packets arrives.
+/**
+ * dccp_ackvec_update_old  -  Update previous state as per RFC 4340, 11.4.1
+ * @av:		non-empty buffer to update
+ * @distance:   negative or zero distance of @seqno from buf_ackno downward
+ * @seqno:	the (old) sequence number whose record is to be updated
+ * @state:	state in which packet carrying @seqno was received
  */
-static inline int dccp_ackvec_set_buf_head_state(struct dccp_ackvec *av,
-						 const unsigned int packets,
-						 const unsigned char state)
+static void dccp_ackvec_update_old(struct dccp_ackvec *av, s64 distance,
+				   u64 seqno, enum dccp_ackvec_states state)
 {
-	long gap;
-	long new_head;
+	u16 ptr = av->av_buf_head;
 
-	if (av->av_vec_len + packets > DCCPAV_MAX_ACKVEC_LEN)
-		return -ENOBUFS;
+	BUG_ON(distance > 0);
+	if (unlikely(dccp_ackvec_is_empty(av)))
+		return;
 
-	gap	 = packets - 1;
-	new_head = av->av_buf_head - packets;
+	do {
+		u8 runlen = dccp_ackvec_runlen(av->av_buf + ptr);
 
-	if (new_head < 0) {
-		if (gap > 0) {
-			memset(av->av_buf, DCCPAV_NOT_RECEIVED,
-			       gap + new_head + 1);
-			gap = -new_head;
+		if (distance + runlen >= 0) {
+			/*
+			 * Only update the state if packet has not been received
+			 * yet. This is OK as per the second table in RFC 4340,
+			 * 11.4.1; i.e. here we are using the following table:
+			 *                     RECEIVED
+			 *                      0   1   3
+			 *              S     +---+---+---+
+			 *              T   0 | 0 | 0 | 0 |
+			 *              O     +---+---+---+
+			 *              R   1 | 1 | 1 | 1 |
+			 *              E     +---+---+---+
+			 *              D   3 | 0 | 1 | 3 |
+			 *                    +---+---+---+
+			 * The "Not Received" state was set by reserve_seats().
+			 */
+			if (av->av_buf[ptr] == DCCPAV_NOT_RECEIVED)
+				av->av_buf[ptr] = state;
+			else
+				dccp_pr_debug("Not changing %llu state to %u\n",
+					      (unsigned long long)seqno, state);
+			break;
 		}
-		new_head += DCCPAV_MAX_ACKVEC_LEN;
-	}
 
-	av->av_buf_head = new_head;
+		distance += runlen + 1;
+		ptr	  = __ackvec_idx_add(ptr, 1);
 
-	if (gap > 0)
-		memset(av->av_buf + av->av_buf_head + 1,
-		       DCCPAV_NOT_RECEIVED, gap);
+	} while (ptr != av->av_buf_tail);
+}
 
-	av->av_buf[av->av_buf_head] = state;
-	av->av_vec_len += packets;
-	return 0;
+/* Mark @num entries after buf_head as "Not yet received". */
+static void dccp_ackvec_reserve_seats(struct dccp_ackvec *av, u16 num)
+{
+	u16 start = __ackvec_idx_add(av->av_buf_head, 1),
+	    len	  = DCCPAV_MAX_ACKVEC_LEN - start;
+
+	/* check for buffer wrap-around */
+	if (num > len) {
+		memset(av->av_buf + start, DCCPAV_NOT_RECEIVED, len);
+		start = 0;
+		num  -= len;
+	}
+	if (num)
+		memset(av->av_buf + start, DCCPAV_NOT_RECEIVED, num);
 }
 
-/*
- * Implements the RFC 4340, Appendix A
+/**
+ * dccp_ackvec_add_new  -  Record one or more new entries in Ack Vector buffer
+ * @av:		 container of buffer to update (can be empty or non-empty)
+ * @num_packets: number of packets to register (must be >= 1)
+ * @seqno:	 sequence number of the first packet in @num_packets
+ * @state:	 state in which packet carrying @seqno was received
  */
-int dccp_ackvec_add(struct dccp_ackvec *av, const struct sock *sk,
-		    const u64 ackno, const u8 state)
+static void dccp_ackvec_add_new(struct dccp_ackvec *av, u32 num_packets,
+				u64 seqno, enum dccp_ackvec_states state)
 {
-	u8 *cur_head = av->av_buf + av->av_buf_head,
-	   *buf_end  = av->av_buf + DCCPAV_MAX_ACKVEC_LEN;
-	/*
-	 * Check at the right places if the buffer is full, if it is, tell the
-	 * caller to start dropping packets till the HC-Sender acks our ACK
-	 * vectors, when we will free up space in av_buf.
-	 *
-	 * We may well decide to do buffer compression, etc, but for now lets
-	 * just drop.
-	 *
-	 * From Appendix A.1.1 (`New Packets'):
-	 *
-	 *	Of course, the circular buffer may overflow, either when the
-	 *	HC-Sender is sending data at a very high rate, when the
-	 *	HC-Receiver's acknowledgements are not reaching the HC-Sender,
-	 *	or when the HC-Sender is forgetting to acknowledge those acks
-	 *	(so the HC-Receiver is unable to clean up old state). In this
-	 *	case, the HC-Receiver should either compress the buffer (by
-	 *	increasing run lengths when possible), transfer its state to
-	 *	a larger buffer, or, as a last resort, drop all received
-	 *	packets, without processing them whatsoever, until its buffer
-	 *	shrinks again.
-	 */
+	u32 num_cells = num_packets;
 
-	/* See if this is the first ackno being inserted */
-	if (av->av_vec_len == 0) {
-		*cur_head = state;
-		av->av_vec_len = 1;
-	} else if (after48(ackno, av->av_buf_ackno)) {
-		const u64 delta = dccp_delta_seqno(av->av_buf_ackno, ackno);
+	if (num_packets > DCCPAV_BURST_THRESH) {
+		u32 lost_packets = num_packets - 1;
 
+		DCCP_WARN("Warning: large burst loss (%u)\n", lost_packets);
 		/*
-		 * Look if the state of this packet is the same as the
-		 * previous ackno and if so if we can bump the head len.
+		 * We received 1 packet and have a loss of size "num_packets-1"
+		 * which we squeeze into num_cells-1 rather than reserving an
+		 * entire byte for each lost packet.
+		 * The reason is that the vector grows in O(burst_length); when
+		 * it grows too large there will no room left for the payload.
+		 * This is a trade-off: if a few packets out of the burst show
+		 * up later, their state will not be changed; it is simply too
+		 * costly to reshuffle/reallocate/copy the buffer each time.
+		 * Should such problems persist, we will need to switch to a
+		 * different underlying data structure.
 		 */
-		if (delta == 1 && dccp_ackvec_state(cur_head) == state &&
-		    dccp_ackvec_runlen(cur_head) < DCCPAV_MAX_RUNLEN)
-			*cur_head += 1;
-		else if (dccp_ackvec_set_buf_head_state(av, delta, state))
-			return -ENOBUFS;
-	} else {
-		/*
-		 * A.1.2.  Old Packets
-		 *
-		 *	When a packet with Sequence Number S <= buf_ackno
-		 *	arrives, the HC-Receiver will scan the table for
-		 *	the byte corresponding to S. (Indexing structures
-		 *	could reduce the complexity of this scan.)
-		 */
-		u64 delta = dccp_delta_seqno(ackno, av->av_buf_ackno);
+		for (num_packets = num_cells = 1; lost_packets; ++num_cells) {
+			u8 len = min(lost_packets, (u32)DCCPAV_MAX_RUNLEN);
 
-		while (1) {
-			const u8 len = dccp_ackvec_runlen(cur_head);
-			/*
-			 * valid packets not yet in av_buf have a reserved
-			 * entry, with a len equal to 0.
-			 */
-			if (*cur_head == DCCPAV_NOT_RECEIVED && delta == 0) {
-				dccp_pr_debug("Found %llu reserved seat!\n",
-					      (unsigned long long)ackno);
-				*cur_head = state;
-				goto out;
-			}
-			/* len == 0 means one packet */
-			if (delta < len + 1)
-				goto out_duplicate;
-
-			delta -= len + 1;
-			if (++cur_head == buf_end)
-				cur_head = av->av_buf;
+			av->av_buf_head = __ackvec_idx_sub(av->av_buf_head, 1);
+			av->av_buf[av->av_buf_head] = DCCPAV_NOT_RECEIVED | len;
+
+			lost_packets -= len;
 		}
 	}
 
-	av->av_buf_ackno = ackno;
-out:
-	return 0;
+	if (num_cells + dccp_ackvec_buflen(av) >= DCCPAV_MAX_ACKVEC_LEN) {
+		DCCP_CRIT("Ack Vector buffer overflow: dropping old entries\n");
+		av->av_overflow = true;
+	}
+
+	av->av_buf_head = __ackvec_idx_sub(av->av_buf_head, num_packets);
+	if (av->av_overflow)
+		av->av_buf_tail = av->av_buf_head;
+
+	av->av_buf[av->av_buf_head] = state;
+	av->av_buf_ackno	    = seqno;
 
-out_duplicate:
-	/* Duplicate packet */
-	dccp_pr_debug("Received a dup or already considered lost "
-		      "packet: %llu\n", (unsigned long long)ackno);
-	return -EILSEQ;
+	if (num_packets > 1)
+		dccp_ackvec_reserve_seats(av, num_packets - 1);
 }
 
-static void dccp_ackvec_throw_record(struct dccp_ackvec *av,
-				     struct dccp_ackvec_record *avr)
+/**
+ * dccp_ackvec_input  -  Register incoming packet in the buffer
+ */
+void dccp_ackvec_input(struct dccp_ackvec *av, struct sk_buff *skb)
 {
-	struct dccp_ackvec_record *next;
+	u64 seqno = DCCP_SKB_CB(skb)->dccpd_seq;
+	enum dccp_ackvec_states state = DCCPAV_RECEIVED;
 
-	/* sort out vector length */
-	if (av->av_buf_head <= avr->avr_ack_ptr)
-		av->av_vec_len = avr->avr_ack_ptr - av->av_buf_head;
-	else
-		av->av_vec_len = DCCPAV_MAX_ACKVEC_LEN - 1 -
-				 av->av_buf_head + avr->avr_ack_ptr;
+	if (dccp_ackvec_is_empty(av)) {
+		dccp_ackvec_add_new(av, 1, seqno, state);
+		av->av_tail_ackno = seqno;
 
-	/* free records */
-	list_for_each_entry_safe_from(avr, next, &av->av_records, avr_node) {
-		list_del(&avr->avr_node);
-		kmem_cache_free(dccp_ackvec_record_slab, avr);
-	}
-}
+	} else {
+		s64 num_packets = dccp_delta_seqno(av->av_buf_ackno, seqno);
+		u8 *current_head = av->av_buf + av->av_buf_head;
 
-void dccp_ackvec_check_rcv_ackno(struct dccp_ackvec *av, struct sock *sk,
-				 const u64 ackno)
-{
-	struct dccp_ackvec_record *avr;
+		if (num_packets == 1 &&
+		    dccp_ackvec_state(current_head) == state &&
+		    dccp_ackvec_runlen(current_head) < DCCPAV_MAX_RUNLEN) {
 
-	/*
-	 * If we traverse backwards, it should be faster when we have large
-	 * windows. We will be receiving ACKs for stuff we sent a while back
-	 * -sorbo.
-	 */
-	list_for_each_entry_reverse(avr, &av->av_records, avr_node) {
-		if (ackno == avr->avr_ack_seqno) {
-			dccp_pr_debug("%s ACK packet 0, len=%d, ack_seqno=%llu, "
-				      "ack_ackno=%llu, ACKED!\n",
-				      dccp_role(sk), avr->avr_ack_runlen,
-				      (unsigned long long)avr->avr_ack_seqno,
-				      (unsigned long long)avr->avr_ack_ackno);
-			dccp_ackvec_throw_record(av, avr);
-			break;
-		} else if (avr->avr_ack_seqno > ackno)
-			break; /* old news */
+			*current_head   += 1;
+			av->av_buf_ackno = seqno;
+
+		} else if (num_packets > 0) {
+			dccp_ackvec_add_new(av, num_packets, seqno, state);
+		} else {
+			dccp_ackvec_update_old(av, num_packets, seqno, state);
+		}
 	}
 }
 
-static void dccp_ackvec_check_rcv_ackvector(struct dccp_ackvec *av,
-					    struct sock *sk, u64 *ackno,
-					    const unsigned char len,
-					    const unsigned char *vector)
+/**
+ * dccp_ackvec_clear_state  -  Perform house-keeping / garbage-collection
+ * This routine is called when the peer acknowledges the receipt of Ack Vectors
+ * up to and including @ackno. While based on on section A.3 of RFC 4340, here
+ * are additional precautions to prevent corrupted buffer state. In particular,
+ * we use tail_ackno to identify outdated records; it always marks the earliest
+ * packet of group (2) in 11.4.2.
+ */
+void dccp_ackvec_clear_state(struct dccp_ackvec *av, const u64 ackno)
 {
-	unsigned char i;
-	struct dccp_ackvec_record *avr;
+	struct dccp_ackvec_record *avr, *next;
+	u8 runlen_now, eff_runlen;
+	s64 delta;
 
-	/* Check if we actually sent an ACK vector */
-	if (list_empty(&av->av_records))
+	avr = dccp_ackvec_lookup(&av->av_records, ackno);
+	if (avr == NULL)
 		return;
+	/*
+	 * Deal with outdated acknowledgments: this arises when e.g. there are
+	 * several old records and the acks from the peer come in slowly. In
+	 * that case we may still have records that pre-date tail_ackno.
+	 */
+	delta = dccp_delta_seqno(av->av_tail_ackno, avr->avr_ack_ackno);
+	if (delta < 0)
+		goto free_records;
+	/*
+	 * Deal with overlapping Ack Vectors: don't subtract more than the
+	 * number of packets between tail_ackno and ack_ackno.
+	 */
+	eff_runlen = delta < avr->avr_ack_runlen ? delta : avr->avr_ack_runlen;
 
-	i = len;
+	runlen_now = dccp_ackvec_runlen(av->av_buf + avr->avr_ack_ptr);
 	/*
-	 * XXX
-	 * I think it might be more efficient to work backwards. See comment on
-	 * rcv_ackno. -sorbo.
+	 * The run length of Ack Vector cells does not decrease over time. If
+	 * the run length is the same as at the time the Ack Vector was sent, we
+	 * free the ack_ptr cell. That cell can however not be freed if the run
+	 * length has increased: in this case we need to move the tail pointer
+	 * backwards (towards higher indices), to its next-oldest neighbour.
 	 */
-	avr = list_entry(av->av_records.next, struct dccp_ackvec_record, avr_node);
-	while (i--) {
-		const u8 rl = dccp_ackvec_runlen(vector);
-		u64 ackno_end_rl;
+	if (runlen_now > eff_runlen) {
 
-		dccp_set_seqno(&ackno_end_rl, *ackno - rl);
+		av->av_buf[avr->avr_ack_ptr] -= eff_runlen + 1;
+		av->av_buf_tail = __ackvec_idx_add(avr->avr_ack_ptr, 1);
 
+		/* This move may not have cleared the overflow flag. */
+		if (av->av_overflow)
+			av->av_overflow = (av->av_buf_head == av->av_buf_tail);
+	} else {
+		av->av_buf_tail	= avr->avr_ack_ptr;
 		/*
-		 * If our AVR sequence number is greater than the ack, go
-		 * forward in the AVR list until it is not so.
+		 * We have made sure that avr points to a valid cell within the
+		 * buffer. This cell is either older than head, or equals head
+		 * (empty buffer): in both cases we no longer have any overflow.
 		 */
-		list_for_each_entry_from(avr, &av->av_records, avr_node) {
-			if (!after48(avr->avr_ack_seqno, *ackno))
-				goto found;
-		}
-		/* End of the av_records list, not found, exit */
-		break;
-found:
-		if (between48(avr->avr_ack_seqno, ackno_end_rl, *ackno)) {
-			if (dccp_ackvec_state(vector) != DCCPAV_NOT_RECEIVED) {
-				dccp_pr_debug("%s ACK vector 0, len=%d, "
-					      "ack_seqno=%llu, ack_ackno=%llu, "
-					      "ACKED!\n",
-					      dccp_role(sk), len,
-					      (unsigned long long)
-					      avr->avr_ack_seqno,
-					      (unsigned long long)
-					      avr->avr_ack_ackno);
-				dccp_ackvec_throw_record(av, avr);
-				break;
-			}
-			/*
-			 * If it wasn't received, continue scanning... we might
-			 * find another one.
-			 */
-		}
+		av->av_overflow	= 0;
+	}
 
-		dccp_set_seqno(ackno, ackno_end_rl - 1);
-		++vector;
+	/*
+	 * The peer has acknowledged up to and including ack_ackno. Hence the
+	 * first packet in group (2) of 11.4.2 is the successor of ack_ackno.
+	 */
+	av->av_tail_ackno = ADD48(avr->avr_ack_ackno, 1);
+
+free_records:
+	list_for_each_entry_safe_from(avr, next, &av->av_records, avr_node) {
+		list_del(&avr->avr_node);
+		kmem_cache_free(dccp_ackvec_record_slab, avr);
 	}
 }
 
-int dccp_ackvec_parse(struct sock *sk, const struct sk_buff *skb,
-		      u64 *ackno, const u8 opt, const u8 *value, const u8 len)
+/*
+ *	Routines to keep track of Ack Vectors received in an skb
+ */
+int dccp_ackvec_parsed_add(struct list_head *head, u8 *vec, u8 len, u8 nonce)
 {
-	if (len > DCCP_SINGLE_OPT_MAXLEN)
-		return -1;
+	struct dccp_ackvec_parsed *new = kmalloc(sizeof(*new), GFP_ATOMIC);
+
+	if (new == NULL)
+		return -ENOBUFS;
+	new->vec   = vec;
+	new->len   = len;
+	new->nonce = nonce;
 
-	/* dccp_ackvector_print(DCCP_SKB_CB(skb)->dccpd_ack_seq, value, len); */
-	dccp_ackvec_check_rcv_ackvector(dccp_sk(sk)->dccps_hc_rx_ackvec, sk,
-					ackno, len, value);
+	list_add_tail(&new->node, head);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(dccp_ackvec_parsed_add);
+
+void dccp_ackvec_parsed_cleanup(struct list_head *parsed_chunks)
+{
+	struct dccp_ackvec_parsed *cur, *next;
+
+	list_for_each_entry_safe(cur, next, parsed_chunks, node)
+		kfree(cur);
+	INIT_LIST_HEAD(parsed_chunks);
+}
+EXPORT_SYMBOL_GPL(dccp_ackvec_parsed_cleanup);
 
 int __init dccp_ackvec_init(void)
 {
diff --git a/net/dccp/ackvec.h b/net/dccp/ackvec.h
index 23880be8fc2..e2ab0627a5f 100644
--- a/net/dccp/ackvec.h
+++ b/net/dccp/ackvec.h
@@ -29,6 +29,9 @@
 /* Estimated minimum average Ack Vector length - used for updating MPS */
 #define DCCPAV_MIN_OPTLEN	16
 
+/* Threshold for coping with large bursts of losses */
+#define DCCPAV_BURST_THRESH	(DCCPAV_MAX_ACKVEC_LEN / 8)
+
 enum dccp_ackvec_states {
 	DCCPAV_RECEIVED =	0x00,
 	DCCPAV_ECN_MARKED =	0x40,
@@ -61,7 +64,6 @@ static inline u8 dccp_ackvec_state(const u8 *cell)
  *		   %DCCP_SINGLE_OPT_MAXLEN cells in the live portion of @av_buf
  * @av_overflow:   if 1 then buf_head == buf_tail indicates buffer wraparound
  * @av_records:	   list of %dccp_ackvec_record (Ack Vectors sent previously)
- * @av_veclen:	   length of the live portion of @av_buf
  */
 struct dccp_ackvec {
 	u8			av_buf[DCCPAV_MAX_ACKVEC_LEN];
@@ -72,7 +74,6 @@ struct dccp_ackvec {
 	bool			av_buf_nonce[DCCPAV_NUM_ACKVECS];
 	u8			av_overflow:1;
 	struct list_head	av_records;
-	u16			av_vec_len;
 };
 
 /** struct dccp_ackvec_record - Records information about sent Ack Vectors
@@ -98,29 +99,38 @@ struct dccp_ackvec_record {
 	u8		 avr_ack_nonce:1;
 };
 
-struct sock;
-struct sk_buff;
-
 extern int dccp_ackvec_init(void);
 extern void dccp_ackvec_exit(void);
 
 extern struct dccp_ackvec *dccp_ackvec_alloc(const gfp_t priority);
 extern void dccp_ackvec_free(struct dccp_ackvec *av);
 
-extern int dccp_ackvec_add(struct dccp_ackvec *av, const struct sock *sk,
-			   const u64 ackno, const u8 state);
-
-extern void dccp_ackvec_check_rcv_ackno(struct dccp_ackvec *av,
-					struct sock *sk, const u64 ackno);
-extern int dccp_ackvec_parse(struct sock *sk, const struct sk_buff *skb,
-			     u64 *ackno, const u8 opt,
-			     const u8 *value, const u8 len);
-
+extern void dccp_ackvec_input(struct dccp_ackvec *av, struct sk_buff *skb);
 extern int  dccp_ackvec_update_records(struct dccp_ackvec *av, u64 seq, u8 sum);
+extern void dccp_ackvec_clear_state(struct dccp_ackvec *av, const u64 ackno);
 extern u16  dccp_ackvec_buflen(const struct dccp_ackvec *av);
 
 static inline bool dccp_ackvec_is_empty(const struct dccp_ackvec *av)
 {
 	return av->av_overflow == 0 && av->av_buf_head == av->av_buf_tail;
 }
+
+/**
+ * struct dccp_ackvec_parsed  -  Record offsets of Ack Vectors in skb
+ * @vec:	start of vector (offset into skb)
+ * @len:	length of @vec
+ * @nonce:	whether @vec had an ECN nonce of 0 or 1
+ * @node:	FIFO - arranged in descending order of ack_ackno
+ * This structure is used by CCIDs to access Ack Vectors in a received skb.
+ */
+struct dccp_ackvec_parsed {
+	u8		 *vec,
+			 len,
+			 nonce:1;
+	struct list_head node;
+};
+
+extern int dccp_ackvec_parsed_add(struct list_head *head,
+				  u8 *vec, u8 len, u8 nonce);
+extern void dccp_ackvec_parsed_cleanup(struct list_head *parsed_chunks);
 #endif /* _ACKVEC_H */
diff --git a/net/dccp/ccids/ccid2.c b/net/dccp/ccids/ccid2.c
index cb1b4a0d187..e96d5e81003 100644
--- a/net/dccp/ccids/ccid2.c
+++ b/net/dccp/ccids/ccid2.c
@@ -246,68 +246,6 @@ static void ccid2_hc_tx_packet_sent(struct sock *sk, unsigned int len)
 #endif
 }
 
-/* XXX Lame code duplication!
- * returns -1 if none was found.
- * else returns the next offset to use in the function call.
- */
-static int ccid2_ackvector(struct sock *sk, struct sk_buff *skb, int offset,
-			   unsigned char **vec, unsigned char *veclen)
-{
-	const struct dccp_hdr *dh = dccp_hdr(skb);
-	unsigned char *options = (unsigned char *)dh + dccp_hdr_len(skb);
-	unsigned char *opt_ptr;
-	const unsigned char *opt_end = (unsigned char *)dh +
-					(dh->dccph_doff * 4);
-	unsigned char opt, len;
-	unsigned char *value;
-
-	BUG_ON(offset < 0);
-	options += offset;
-	opt_ptr = options;
-	if (opt_ptr >= opt_end)
-		return -1;
-
-	while (opt_ptr != opt_end) {
-		opt   = *opt_ptr++;
-		len   = 0;
-		value = NULL;
-
-		/* Check if this isn't a single byte option */
-		if (opt > DCCPO_MAX_RESERVED) {
-			if (opt_ptr == opt_end)
-				goto out_invalid_option;
-
-			len = *opt_ptr++;
-			if (len < 3)
-				goto out_invalid_option;
-			/*
-			 * Remove the type and len fields, leaving
-			 * just the value size
-			 */
-			len     -= 2;
-			value   = opt_ptr;
-			opt_ptr += len;
-
-			if (opt_ptr > opt_end)
-				goto out_invalid_option;
-		}
-
-		switch (opt) {
-		case DCCPO_ACK_VECTOR_0:
-		case DCCPO_ACK_VECTOR_1:
-			*vec	= value;
-			*veclen = len;
-			return offset + (opt_ptr - options);
-		}
-	}
-
-	return -1;
-
-out_invalid_option:
-	DCCP_BUG("Invalid option - this should not happen (previous parsing)!");
-	return -1;
-}
-
 /**
  * ccid2_rtt_estimator - Sample RTT and compute RTO using RFC2988 algorithm
  * This code is almost identical with TCP's tcp_rtt_estimator(), since
@@ -432,16 +370,28 @@ static void ccid2_congestion_event(struct sock *sk, struct ccid2_seq *seqp)
 		ccid2_change_l_ack_ratio(sk, hc->tx_cwnd);
 }
 
+static int ccid2_hc_tx_parse_options(struct sock *sk, u8 packet_type,
+				     u8 option, u8 *optval, u8 optlen)
+{
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
+
+	switch (option) {
+	case DCCPO_ACK_VECTOR_0:
+	case DCCPO_ACK_VECTOR_1:
+		return dccp_ackvec_parsed_add(&hc->tx_av_chunks, optval, optlen,
+					      option - DCCPO_ACK_VECTOR_0);
+	}
+	return 0;
+}
+
 static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
 	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 	const bool sender_was_blocked = ccid2_cwnd_network_limited(hc);
+	struct dccp_ackvec_parsed *avp;
 	u64 ackno, seqno;
 	struct ccid2_seq *seqp;
-	unsigned char *vector;
-	unsigned char veclen;
-	int offset = 0;
 	int done = 0;
 	unsigned int maxincr = 0;
 
@@ -475,17 +425,12 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
 	}
 
 	/* check forward path congestion */
-	/* still didn't send out new data packets */
-	if (hc->tx_seqh == hc->tx_seqt)
+	if (dccp_packet_without_ack(skb))
 		return;
 
-	switch (DCCP_SKB_CB(skb)->dccpd_type) {
-	case DCCP_PKT_ACK:
-	case DCCP_PKT_DATAACK:
-		break;
-	default:
-		return;
-	}
+	/* still didn't send out new data packets */
+	if (hc->tx_seqh == hc->tx_seqt)
+		goto done;
 
 	ackno = DCCP_SKB_CB(skb)->dccpd_ack_seq;
 	if (after48(ackno, hc->tx_high_ack))
@@ -509,15 +454,16 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
 		maxincr = DIV_ROUND_UP(dp->dccps_l_ack_ratio, 2);
 
 	/* go through all ack vectors */
-	while ((offset = ccid2_ackvector(sk, skb, offset,
-					 &vector, &veclen)) != -1) {
+	list_for_each_entry(avp, &hc->tx_av_chunks, node) {
 		/* go through this ack vector */
-		while (veclen--) {
-			u64 ackno_end_rl = SUB48(ackno, dccp_ackvec_runlen(vector));
+		for (; avp->len--; avp->vec++) {
+			u64 ackno_end_rl = SUB48(ackno,
+						 dccp_ackvec_runlen(avp->vec));
 
-			ccid2_pr_debug("ackvec start:%llu end:%llu\n",
+			ccid2_pr_debug("ackvec %llu |%u,%u|\n",
 				       (unsigned long long)ackno,
-				       (unsigned long long)ackno_end_rl);
+				       dccp_ackvec_state(avp->vec) >> 6,
+				       dccp_ackvec_runlen(avp->vec));
 			/* if the seqno we are analyzing is larger than the
 			 * current ackno, then move towards the tail of our
 			 * seqnos.
@@ -536,7 +482,7 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
 			 * run length
 			 */
 			while (between48(seqp->ccid2s_seq,ackno_end_rl,ackno)) {
-				const u8 state = dccp_ackvec_state(vector);
+				const u8 state = dccp_ackvec_state(avp->vec);
 
 				/* new packet received or marked */
 				if (state != DCCPAV_NOT_RECEIVED &&
@@ -563,7 +509,6 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
 				break;
 
 			ackno = SUB48(ackno_end_rl, 1);
-			vector++;
 		}
 		if (done)
 			break;
@@ -631,10 +576,11 @@ static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
 		sk_stop_timer(sk, &hc->tx_rtotimer);
 	else
 		sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + hc->tx_rto);
-
+done:
 	/* check if incoming Acks allow pending packets to be sent */
 	if (sender_was_blocked && !ccid2_cwnd_network_limited(hc))
 		tasklet_schedule(&dccp_sk(sk)->dccps_xmitlet);
+	dccp_ackvec_parsed_cleanup(&hc->tx_av_chunks);
 }
 
 static int ccid2_hc_tx_init(struct ccid *ccid, struct sock *sk)
@@ -663,6 +609,7 @@ static int ccid2_hc_tx_init(struct ccid *ccid, struct sock *sk)
 	hc->tx_last_cong = ccid2_time_stamp;
 	setup_timer(&hc->tx_rtotimer, ccid2_hc_tx_rto_expire,
 			(unsigned long)sk);
+	INIT_LIST_HEAD(&hc->tx_av_chunks);
 	return 0;
 }
 
@@ -696,16 +643,17 @@ static void ccid2_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
 }
 
 struct ccid_operations ccid2_ops = {
-	.ccid_id		= DCCPC_CCID2,
-	.ccid_name		= "TCP-like",
-	.ccid_hc_tx_obj_size	= sizeof(struct ccid2_hc_tx_sock),
-	.ccid_hc_tx_init	= ccid2_hc_tx_init,
-	.ccid_hc_tx_exit	= ccid2_hc_tx_exit,
-	.ccid_hc_tx_send_packet	= ccid2_hc_tx_send_packet,
-	.ccid_hc_tx_packet_sent	= ccid2_hc_tx_packet_sent,
-	.ccid_hc_tx_packet_recv	= ccid2_hc_tx_packet_recv,
-	.ccid_hc_rx_obj_size	= sizeof(struct ccid2_hc_rx_sock),
-	.ccid_hc_rx_packet_recv	= ccid2_hc_rx_packet_recv,
+	.ccid_id		  = DCCPC_CCID2,
+	.ccid_name		  = "TCP-like",
+	.ccid_hc_tx_obj_size	  = sizeof(struct ccid2_hc_tx_sock),
+	.ccid_hc_tx_init	  = ccid2_hc_tx_init,
+	.ccid_hc_tx_exit	  = ccid2_hc_tx_exit,
+	.ccid_hc_tx_send_packet	  = ccid2_hc_tx_send_packet,
+	.ccid_hc_tx_packet_sent	  = ccid2_hc_tx_packet_sent,
+	.ccid_hc_tx_parse_options = ccid2_hc_tx_parse_options,
+	.ccid_hc_tx_packet_recv	  = ccid2_hc_tx_packet_recv,
+	.ccid_hc_rx_obj_size	  = sizeof(struct ccid2_hc_rx_sock),
+	.ccid_hc_rx_packet_recv	  = ccid2_hc_rx_packet_recv,
 };
 
 #ifdef CONFIG_IP_DCCP_CCID2_DEBUG
diff --git a/net/dccp/ccids/ccid2.h b/net/dccp/ccids/ccid2.h
index 25cb6b216ed..e9985dafc2c 100644
--- a/net/dccp/ccids/ccid2.h
+++ b/net/dccp/ccids/ccid2.h
@@ -55,6 +55,7 @@ struct ccid2_seq {
  * @tx_rtt_seq:		     to decay RTTVAR at most once per flight
  * @tx_rpseq:		     last consecutive seqno
  * @tx_rpdupack:	     dupacks since rpseq
+ * @tx_av_chunks:	     list of Ack Vectors received on current skb
  */
 struct ccid2_hc_tx_sock {
 	u32			tx_cwnd;
@@ -79,6 +80,7 @@ struct ccid2_hc_tx_sock {
 	int			tx_rpdupack;
 	u32			tx_last_cong;
 	u64			tx_high_ack;
+	struct list_head	tx_av_chunks;
 };
 
 static inline bool ccid2_cwnd_network_limited(struct ccid2_hc_tx_sock *hc)
diff --git a/net/dccp/dccp.h b/net/dccp/dccp.h
index 19fafd59746..45087052d89 100644
--- a/net/dccp/dccp.h
+++ b/net/dccp/dccp.h
@@ -93,9 +93,6 @@ extern void dccp_time_wait(struct sock *sk, int state, int timeo);
 #define DCCP_FALLBACK_RTT	(USEC_PER_SEC / 5)
 #define DCCP_SANE_RTT_MAX	(3 * USEC_PER_SEC)
 
-/* Maximal interval between probes for local resources.  */
-#define DCCP_RESOURCE_PROBE_INTERVAL ((unsigned)(HZ / 2U))
-
 /* sysctl variables for DCCP */
 extern int  sysctl_dccp_request_retries;
 extern int  sysctl_dccp_retries1;
@@ -203,12 +200,7 @@ struct dccp_mib {
 DECLARE_SNMP_STAT(struct dccp_mib, dccp_statistics);
 #define DCCP_INC_STATS(field)	    SNMP_INC_STATS(dccp_statistics, field)
 #define DCCP_INC_STATS_BH(field)    SNMP_INC_STATS_BH(dccp_statistics, field)
-#define DCCP_INC_STATS_USER(field)  SNMP_INC_STATS_USER(dccp_statistics, field)
 #define DCCP_DEC_STATS(field)	    SNMP_DEC_STATS(dccp_statistics, field)
-#define DCCP_ADD_STATS_BH(field, val) \
-			SNMP_ADD_STATS_BH(dccp_statistics, field, val)
-#define DCCP_ADD_STATS_USER(field, val)	\
-			SNMP_ADD_STATS_USER(dccp_statistics, field, val)
 
 /*
  * 	Checksumming routines
@@ -243,6 +235,19 @@ extern void dccp_reqsk_send_ack(struct sock *sk, struct sk_buff *skb,
 extern void dccp_send_sync(struct sock *sk, const u64 seq,
 			   const enum dccp_pkt_type pkt_type);
 
+/*
+ * TX Packet Dequeueing Interface
+ */
+extern void		dccp_qpolicy_push(struct sock *sk, struct sk_buff *skb);
+extern bool		dccp_qpolicy_full(struct sock *sk);
+extern void		dccp_qpolicy_drop(struct sock *sk, struct sk_buff *skb);
+extern struct sk_buff	*dccp_qpolicy_top(struct sock *sk);
+extern struct sk_buff	*dccp_qpolicy_pop(struct sock *sk);
+extern bool		dccp_qpolicy_param_ok(struct sock *sk, __be32 param);
+
+/*
+ * TX Packet Output and TX Timers
+ */
 extern void   dccp_write_xmit(struct sock *sk);
 extern void   dccp_write_space(struct sock *sk);
 extern void   dccp_flush_write_queue(struct sock *sk, long *time_budget);
diff --git a/net/dccp/input.c b/net/dccp/input.c
index c7aeeba859d..15af247ea00 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -160,13 +160,15 @@ static void dccp_rcv_reset(struct sock *sk, struct sk_buff *skb)
 	dccp_time_wait(sk, DCCP_TIME_WAIT, 0);
 }
 
-static void dccp_event_ack_recv(struct sock *sk, struct sk_buff *skb)
+static void dccp_handle_ackvec_processing(struct sock *sk, struct sk_buff *skb)
 {
-	struct dccp_sock *dp = dccp_sk(sk);
+	struct dccp_ackvec *av = dccp_sk(sk)->dccps_hc_rx_ackvec;
 
-	if (dp->dccps_hc_rx_ackvec != NULL)
-		dccp_ackvec_check_rcv_ackno(dp->dccps_hc_rx_ackvec, sk,
-					    DCCP_SKB_CB(skb)->dccpd_ack_seq);
+	if (av == NULL)
+		return;
+	if (DCCP_SKB_CB(skb)->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ)
+		dccp_ackvec_clear_state(av, DCCP_SKB_CB(skb)->dccpd_ack_seq);
+	dccp_ackvec_input(av, skb);
 }
 
 static void dccp_deliver_input_to_ccids(struct sock *sk, struct sk_buff *skb)
@@ -239,7 +241,8 @@ static int dccp_check_seqno(struct sock *sk, struct sk_buff *skb)
 		dccp_update_gsr(sk, seqno);
 
 		if (dh->dccph_type != DCCP_PKT_SYNC &&
-		    (ackno != DCCP_PKT_WITHOUT_ACK_SEQ))
+		    ackno != DCCP_PKT_WITHOUT_ACK_SEQ &&
+		    after48(ackno, dp->dccps_gar))
 			dp->dccps_gar = ackno;
 	} else {
 		unsigned long now = jiffies;
@@ -365,21 +368,13 @@ discard:
 int dccp_rcv_established(struct sock *sk, struct sk_buff *skb,
 			 const struct dccp_hdr *dh, const unsigned len)
 {
-	struct dccp_sock *dp = dccp_sk(sk);
-
 	if (dccp_check_seqno(sk, skb))
 		goto discard;
 
 	if (dccp_parse_options(sk, NULL, skb))
 		return 1;
 
-	if (DCCP_SKB_CB(skb)->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ)
-		dccp_event_ack_recv(sk, skb);
-
-	if (dp->dccps_hc_rx_ackvec != NULL &&
-	    dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk,
-			    DCCP_SKB_CB(skb)->dccpd_seq, DCCPAV_RECEIVED))
-		goto discard;
+	dccp_handle_ackvec_processing(sk, skb);
 	dccp_deliver_input_to_ccids(sk, skb);
 
 	return __dccp_rcv_established(sk, skb, dh, len);
@@ -631,14 +626,7 @@ int dccp_rcv_state_process(struct sock *sk, struct sk_buff *skb,
 		if (dccp_parse_options(sk, NULL, skb))
 			return 1;
 
-		if (dcb->dccpd_ack_seq != DCCP_PKT_WITHOUT_ACK_SEQ)
-			dccp_event_ack_recv(sk, skb);
-
-		if (dp->dccps_hc_rx_ackvec != NULL &&
-		    dccp_ackvec_add(dp->dccps_hc_rx_ackvec, sk,
-				    DCCP_SKB_CB(skb)->dccpd_seq, DCCPAV_RECEIVED))
-			goto discard;
-
+		dccp_handle_ackvec_processing(sk, skb);
 		dccp_deliver_input_to_ccids(sk, skb);
 	}
 
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 3f69ea11482..45a434f9416 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -462,15 +462,12 @@ static struct dst_entry* dccp_v4_route_skb(struct net *net, struct sock *sk,
 {
 	struct rtable *rt;
 	struct flowi fl = { .oif = skb_rtable(skb)->rt_iif,
-			    .nl_u = { .ip4_u =
-				      { .daddr = ip_hdr(skb)->saddr,
-					.saddr = ip_hdr(skb)->daddr,
-					.tos = RT_CONN_FLAGS(sk) } },
+			    .fl4_dst = ip_hdr(skb)->saddr,
+			    .fl4_src = ip_hdr(skb)->daddr,
+			    .fl4_tos = RT_CONN_FLAGS(sk),
 			    .proto = sk->sk_protocol,
-			    .uli_u = { .ports =
-				       { .sport = dccp_hdr(skb)->dccph_dport,
-					 .dport = dccp_hdr(skb)->dccph_sport }
-				     }
+			    .fl_ip_sport = dccp_hdr(skb)->dccph_dport,
+			    .fl_ip_dport = dccp_hdr(skb)->dccph_sport
 			  };
 
 	security_skb_classify_flow(skb, &fl);
diff --git a/net/dccp/options.c b/net/dccp/options.c
index 5adeeed5e0d..f06ffcfc8d7 100644
--- a/net/dccp/options.c
+++ b/net/dccp/options.c
@@ -54,7 +54,6 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq,
 	struct dccp_sock *dp = dccp_sk(sk);
 	const struct dccp_hdr *dh = dccp_hdr(skb);
 	const u8 pkt_type = DCCP_SKB_CB(skb)->dccpd_type;
-	u64 ackno = DCCP_SKB_CB(skb)->dccpd_ack_seq;
 	unsigned char *options = (unsigned char *)dh + dccp_hdr_len(skb);
 	unsigned char *opt_ptr = options;
 	const unsigned char *opt_end = (unsigned char *)dh +
@@ -129,14 +128,6 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq,
 			if (rc)
 				goto out_featneg_failed;
 			break;
-		case DCCPO_ACK_VECTOR_0:
-		case DCCPO_ACK_VECTOR_1:
-			if (dccp_packet_without_ack(skb))   /* RFC 4340, 11.4 */
-				break;
-			if (dp->dccps_hc_rx_ackvec != NULL &&
-			    dccp_ackvec_parse(sk, skb, &ackno, opt, value, len))
-				goto out_invalid_option;
-			break;
 		case DCCPO_TIMESTAMP:
 			if (len != 4)
 				goto out_invalid_option;
@@ -226,6 +217,16 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq,
 						     pkt_type, opt, value, len))
 				goto out_invalid_option;
 			break;
+		case DCCPO_ACK_VECTOR_0:
+		case DCCPO_ACK_VECTOR_1:
+			if (dccp_packet_without_ack(skb))   /* RFC 4340, 11.4 */
+				break;
+			/*
+			 * Ack vectors are processed by the TX CCID if it is
+			 * interested. The RX CCID need not parse Ack Vectors,
+			 * since it is only interested in clearing old state.
+			 * Fall through.
+			 */
 		case DCCPO_MIN_TX_CCID_SPECIFIC ... DCCPO_MAX_TX_CCID_SPECIFIC:
 			if (ccid_hc_tx_parse_options(dp->dccps_hc_tx_ccid, sk,
 						     pkt_type, opt, value, len))
@@ -429,6 +430,7 @@ static int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
 	struct dccp_ackvec *av = dp->dccps_hc_rx_ackvec;
+	struct dccp_skb_cb *dcb = DCCP_SKB_CB(skb);
 	const u16 buflen = dccp_ackvec_buflen(av);
 	/* Figure out how many options do we need to represent the ackvec */
 	const u8 nr_opts = DIV_ROUND_UP(buflen, DCCP_SINGLE_OPT_MAXLEN);
@@ -437,10 +439,25 @@ static int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb)
 	const unsigned char *tail, *from;
 	unsigned char *to;
 
-	if (DCCP_SKB_CB(skb)->dccpd_opt_len + len > DCCP_MAX_OPT_LEN)
+	if (dcb->dccpd_opt_len + len > DCCP_MAX_OPT_LEN) {
+		DCCP_WARN("Lacking space for %u bytes on %s packet\n", len,
+			  dccp_packet_name(dcb->dccpd_type));
 		return -1;
-
-	DCCP_SKB_CB(skb)->dccpd_opt_len += len;
+	}
+	/*
+	 * Since Ack Vectors are variable-length, we can not always predict
+	 * their size. To catch exception cases where the space is running out
+	 * on the skb, a separate Sync is scheduled to carry the Ack Vector.
+	 */
+	if (len > DCCPAV_MIN_OPTLEN &&
+	    len + dcb->dccpd_opt_len + skb->len > dp->dccps_mss_cache) {
+		DCCP_WARN("No space left for Ack Vector (%u) on skb (%u+%u), "
+			  "MPS=%u ==> reduce payload size?\n", len, skb->len,
+			  dcb->dccpd_opt_len, dp->dccps_mss_cache);
+		dp->dccps_sync_scheduled = 1;
+		return 0;
+	}
+	dcb->dccpd_opt_len += len;
 
 	to   = skb_push(skb, len);
 	len  = buflen;
@@ -481,7 +498,7 @@ static int dccp_insert_option_ackvec(struct sock *sk, struct sk_buff *skb)
 	/*
 	 * Each sent Ack Vector is recorded in the list, as per A.2 of RFC 4340.
 	 */
-	if (dccp_ackvec_update_records(av, DCCP_SKB_CB(skb)->dccpd_seq, nonce))
+	if (dccp_ackvec_update_records(av, dcb->dccpd_seq, nonce))
 		return -ENOBUFS;
 	return 0;
 }
diff --git a/net/dccp/output.c b/net/dccp/output.c
index 45b91853f5a..784d3021054 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -242,7 +242,7 @@ static void dccp_xmit_packet(struct sock *sk)
 {
 	int err, len;
 	struct dccp_sock *dp = dccp_sk(sk);
-	struct sk_buff *skb = skb_dequeue(&sk->sk_write_queue);
+	struct sk_buff *skb = dccp_qpolicy_pop(sk);
 
 	if (unlikely(skb == NULL))
 		return;
@@ -283,6 +283,15 @@ static void dccp_xmit_packet(struct sock *sk)
 	 * any local drop will eventually be reported via receiver feedback.
 	 */
 	ccid_hc_tx_packet_sent(dp->dccps_hc_tx_ccid, sk, len);
+
+	/*
+	 * If the CCID needs to transfer additional header options out-of-band
+	 * (e.g. Ack Vectors or feature-negotiation options), it activates this
+	 * flag to schedule a Sync. The Sync will automatically incorporate all
+	 * currently pending header options, thus clearing the backlog.
+	 */
+	if (dp->dccps_sync_scheduled)
+		dccp_send_sync(sk, dp->dccps_gsr, DCCP_PKT_SYNC);
 }
 
 /**
@@ -336,7 +345,7 @@ void dccp_write_xmit(struct sock *sk)
 	struct dccp_sock *dp = dccp_sk(sk);
 	struct sk_buff *skb;
 
-	while ((skb = skb_peek(&sk->sk_write_queue))) {
+	while ((skb = dccp_qpolicy_top(sk))) {
 		int rc = ccid_hc_tx_send_packet(dp->dccps_hc_tx_ccid, sk, skb);
 
 		switch (ccid_packet_dequeue_eval(rc)) {
@@ -350,8 +359,7 @@ void dccp_write_xmit(struct sock *sk)
 			dccp_xmit_packet(sk);
 			break;
 		case CCID_PACKET_ERR:
-			skb_dequeue(&sk->sk_write_queue);
-			kfree_skb(skb);
+			dccp_qpolicy_drop(sk, skb);
 			dccp_pr_debug("packet discarded due to err=%d\n", rc);
 		}
 	}
@@ -636,6 +644,12 @@ void dccp_send_sync(struct sock *sk, const u64 ackno,
 	DCCP_SKB_CB(skb)->dccpd_type = pkt_type;
 	DCCP_SKB_CB(skb)->dccpd_ack_seq = ackno;
 
+	/*
+	 * Clear the flag in case the Sync was scheduled for out-of-band data,
+	 * such as carrying a long Ack Vector.
+	 */
+	dccp_sk(sk)->dccps_sync_scheduled = 0;
+
 	dccp_transmit_skb(sk, skb);
 }
 
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index ef343d53fce..152975d942d 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -185,6 +185,7 @@ int dccp_init_sock(struct sock *sk, const __u8 ctl_sock_initialized)
 	dp->dccps_role		= DCCP_ROLE_UNDEFINED;
 	dp->dccps_service	= DCCP_SERVICE_CODE_IS_ABSENT;
 	dp->dccps_l_ack_ratio	= dp->dccps_r_ack_ratio = 1;
+	dp->dccps_tx_qlen	= sysctl_dccp_tx_qlen;
 
 	dccp_init_xmit_timers(sk);
 
@@ -532,6 +533,20 @@ static int do_dccp_setsockopt(struct sock *sk, int level, int optname,
 	case DCCP_SOCKOPT_RECV_CSCOV:
 		err = dccp_setsockopt_cscov(sk, val, true);
 		break;
+	case DCCP_SOCKOPT_QPOLICY_ID:
+		if (sk->sk_state != DCCP_CLOSED)
+			err = -EISCONN;
+		else if (val < 0 || val >= DCCPQ_POLICY_MAX)
+			err = -EINVAL;
+		else
+			dp->dccps_qpolicy = val;
+		break;
+	case DCCP_SOCKOPT_QPOLICY_TXQLEN:
+		if (val < 0)
+			err = -EINVAL;
+		else
+			dp->dccps_tx_qlen = val;
+		break;
 	default:
 		err = -ENOPROTOOPT;
 		break;
@@ -639,6 +654,12 @@ static int do_dccp_getsockopt(struct sock *sk, int level, int optname,
 	case DCCP_SOCKOPT_RECV_CSCOV:
 		val = dp->dccps_pcrlen;
 		break;
+	case DCCP_SOCKOPT_QPOLICY_ID:
+		val = dp->dccps_qpolicy;
+		break;
+	case DCCP_SOCKOPT_QPOLICY_TXQLEN:
+		val = dp->dccps_tx_qlen;
+		break;
 	case 128 ... 191:
 		return ccid_hc_rx_getsockopt(dp->dccps_hc_rx_ccid, sk, optname,
 					     len, (u32 __user *)optval, optlen);
@@ -681,6 +702,47 @@ int compat_dccp_getsockopt(struct sock *sk, int level, int optname,
 EXPORT_SYMBOL_GPL(compat_dccp_getsockopt);
 #endif
 
+static int dccp_msghdr_parse(struct msghdr *msg, struct sk_buff *skb)
+{
+	struct cmsghdr *cmsg = CMSG_FIRSTHDR(msg);
+
+	/*
+	 * Assign an (opaque) qpolicy priority value to skb->priority.
+	 *
+	 * We are overloading this skb field for use with the qpolicy subystem.
+	 * The skb->priority is normally used for the SO_PRIORITY option, which
+	 * is initialised from sk_priority. Since the assignment of sk_priority
+	 * to skb->priority happens later (on layer 3), we overload this field
+	 * for use with queueing priorities as long as the skb is on layer 4.
+	 * The default priority value (if nothing is set) is 0.
+	 */
+	skb->priority = 0;
+
+	for (; cmsg != NULL; cmsg = CMSG_NXTHDR(msg, cmsg)) {
+
+		if (!CMSG_OK(msg, cmsg))
+			return -EINVAL;
+
+		if (cmsg->cmsg_level != SOL_DCCP)
+			continue;
+
+		if (cmsg->cmsg_type <= DCCP_SCM_QPOLICY_MAX &&
+		    !dccp_qpolicy_param_ok(skb->sk, cmsg->cmsg_type))
+			return -EINVAL;
+
+		switch (cmsg->cmsg_type) {
+		case DCCP_SCM_PRIORITY:
+			if (cmsg->cmsg_len != CMSG_LEN(sizeof(__u32)))
+				return -EINVAL;
+			skb->priority = *(__u32 *)CMSG_DATA(cmsg);
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+	return 0;
+}
+
 int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 		 size_t len)
 {
@@ -696,8 +758,7 @@ int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 
 	lock_sock(sk);
 
-	if (sysctl_dccp_tx_qlen &&
-	    (sk->sk_write_queue.qlen >= sysctl_dccp_tx_qlen)) {
+	if (dccp_qpolicy_full(sk)) {
 		rc = -EAGAIN;
 		goto out_release;
 	}
@@ -725,7 +786,11 @@ int dccp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 	if (rc != 0)
 		goto out_discard;
 
-	skb_queue_tail(&sk->sk_write_queue, skb);
+	rc = dccp_msghdr_parse(msg, skb);
+	if (rc != 0)
+		goto out_discard;
+
+	dccp_qpolicy_push(sk, skb);
 	/*
 	 * The xmit_timer is set if the TX CCID is rate-based and will expire
 	 * when congestion control permits to release further packets into the
diff --git a/net/dccp/qpolicy.c b/net/dccp/qpolicy.c
new file mode 100644
index 00000000000..63c30bfa470
--- /dev/null
+++ b/net/dccp/qpolicy.c
@@ -0,0 +1,137 @@
+/*
+ *  net/dccp/qpolicy.c
+ *
+ *  Policy-based packet dequeueing interface for DCCP.
+ *
+ *  Copyright (c) 2008 Tomasz Grobelny <tomasz@grobelny.oswiecenia.net>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License v2
+ *  as published by the Free Software Foundation.
+ */
+#include "dccp.h"
+
+/*
+ *	Simple Dequeueing Policy:
+ *	If tx_qlen is different from 0, enqueue up to tx_qlen elements.
+ */
+static void qpolicy_simple_push(struct sock *sk, struct sk_buff *skb)
+{
+	skb_queue_tail(&sk->sk_write_queue, skb);
+}
+
+static bool qpolicy_simple_full(struct sock *sk)
+{
+	return dccp_sk(sk)->dccps_tx_qlen &&
+	       sk->sk_write_queue.qlen >= dccp_sk(sk)->dccps_tx_qlen;
+}
+
+static struct sk_buff *qpolicy_simple_top(struct sock *sk)
+{
+	return skb_peek(&sk->sk_write_queue);
+}
+
+/*
+ *	Priority-based Dequeueing Policy:
+ *	If tx_qlen is different from 0 and the queue has reached its upper bound
+ *	of tx_qlen elements, replace older packets lowest-priority-first.
+ */
+static struct sk_buff *qpolicy_prio_best_skb(struct sock *sk)
+{
+	struct sk_buff *skb, *best = NULL;
+
+	skb_queue_walk(&sk->sk_write_queue, skb)
+		if (best == NULL || skb->priority > best->priority)
+			best = skb;
+	return best;
+}
+
+static struct sk_buff *qpolicy_prio_worst_skb(struct sock *sk)
+{
+	struct sk_buff *skb, *worst = NULL;
+
+	skb_queue_walk(&sk->sk_write_queue, skb)
+		if (worst == NULL || skb->priority < worst->priority)
+			worst = skb;
+	return worst;
+}
+
+static bool qpolicy_prio_full(struct sock *sk)
+{
+	if (qpolicy_simple_full(sk))
+		dccp_qpolicy_drop(sk, qpolicy_prio_worst_skb(sk));
+	return false;
+}
+
+/**
+ * struct dccp_qpolicy_operations  -  TX Packet Dequeueing Interface
+ * @push: add a new @skb to the write queue
+ * @full: indicates that no more packets will be admitted
+ * @top:  peeks at whatever the queueing policy defines as its `top'
+ */
+static struct dccp_qpolicy_operations {
+	void		(*push)	(struct sock *sk, struct sk_buff *skb);
+	bool		(*full) (struct sock *sk);
+	struct sk_buff*	(*top)  (struct sock *sk);
+	__be32		params;
+
+} qpol_table[DCCPQ_POLICY_MAX] = {
+	[DCCPQ_POLICY_SIMPLE] = {
+		.push   = qpolicy_simple_push,
+		.full   = qpolicy_simple_full,
+		.top    = qpolicy_simple_top,
+		.params = 0,
+	},
+	[DCCPQ_POLICY_PRIO] = {
+		.push   = qpolicy_simple_push,
+		.full   = qpolicy_prio_full,
+		.top    = qpolicy_prio_best_skb,
+		.params = DCCP_SCM_PRIORITY,
+	},
+};
+
+/*
+ *	Externally visible interface
+ */
+void dccp_qpolicy_push(struct sock *sk, struct sk_buff *skb)
+{
+	qpol_table[dccp_sk(sk)->dccps_qpolicy].push(sk, skb);
+}
+
+bool dccp_qpolicy_full(struct sock *sk)
+{
+	return qpol_table[dccp_sk(sk)->dccps_qpolicy].full(sk);
+}
+
+void dccp_qpolicy_drop(struct sock *sk, struct sk_buff *skb)
+{
+	if (skb != NULL) {
+		skb_unlink(skb, &sk->sk_write_queue);
+		kfree_skb(skb);
+	}
+}
+
+struct sk_buff *dccp_qpolicy_top(struct sock *sk)
+{
+	return qpol_table[dccp_sk(sk)->dccps_qpolicy].top(sk);
+}
+
+struct sk_buff *dccp_qpolicy_pop(struct sock *sk)
+{
+	struct sk_buff *skb = dccp_qpolicy_top(sk);
+
+	if (skb != NULL) {
+		/* Clear any skb fields that we used internally */
+		skb->priority = 0;
+		skb_unlink(skb, &sk->sk_write_queue);
+	}
+	return skb;
+}
+
+bool dccp_qpolicy_param_ok(struct sock *sk, __be32 param)
+{
+	/* check if exactly one bit is set */
+	if (!param || (param & (param - 1)))
+		return false;
+	return (qpol_table[dccp_sk(sk)->dccps_qpolicy].params & param) == param;
+}
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 18b8a2cbdf7..2af15b15d1f 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -155,7 +155,7 @@ static const struct proto_ops dn_proto_ops;
 static DEFINE_RWLOCK(dn_hash_lock);
 static struct hlist_head dn_sk_hash[DN_SK_HASH_SIZE];
 static struct hlist_head dn_wild_sk;
-static atomic_t decnet_memory_allocated;
+static atomic_long_t decnet_memory_allocated;
 
 static int __dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen, int flags);
 static int __dn_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen, int flags);
@@ -829,7 +829,7 @@ static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation)
 		return -EINVAL;
 
 	scp->state = DN_CC;
-	scp->segsize_loc = dst_metric(__sk_dst_get(sk), RTAX_ADVMSS);
+	scp->segsize_loc = dst_metric_advmss(__sk_dst_get(sk));
 	dn_send_conn_conf(sk, allocation);
 
 	prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE);
@@ -958,7 +958,7 @@ static int __dn_connect(struct sock *sk, struct sockaddr_dn *addr, int addrlen,
 	sk->sk_route_caps = sk->sk_dst_cache->dev->features;
 	sock->state = SS_CONNECTING;
 	scp->state = DN_CI;
-	scp->segsize_loc = dst_metric(sk->sk_dst_cache, RTAX_ADVMSS);
+	scp->segsize_loc = dst_metric_advmss(sk->sk_dst_cache);
 
 	dn_nsp_send_conninit(sk, NSP_CI);
 	err = -EINPROGRESS;
@@ -1556,6 +1556,8 @@ static int __dn_getsockopt(struct socket *sock, int level,int optname, char __us
 			if (r_len > sizeof(struct linkinfo_dn))
 				r_len = sizeof(struct linkinfo_dn);
 
+			memset(&link, 0, sizeof(link));
+
 			switch(sock->state) {
 				case SS_CONNECTING:
 					link.idn_linkstate = LL_CONNECTING;
diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index 474d54dd08c..5e636365d33 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -110,6 +110,8 @@ static unsigned long dn_rt_deadline;
 
 static int dn_dst_gc(struct dst_ops *ops);
 static struct dst_entry *dn_dst_check(struct dst_entry *, __u32);
+static unsigned int dn_dst_default_advmss(const struct dst_entry *dst);
+static unsigned int dn_dst_default_mtu(const struct dst_entry *dst);
 static struct dst_entry *dn_dst_negative_advice(struct dst_entry *);
 static void dn_dst_link_failure(struct sk_buff *);
 static void dn_dst_update_pmtu(struct dst_entry *dst, u32 mtu);
@@ -129,6 +131,8 @@ static struct dst_ops dn_dst_ops = {
 	.gc_thresh =		128,
 	.gc =			dn_dst_gc,
 	.check =		dn_dst_check,
+	.default_advmss =	dn_dst_default_advmss,
+	.default_mtu =		dn_dst_default_mtu,
 	.negative_advice =	dn_dst_negative_advice,
 	.link_failure =		dn_dst_link_failure,
 	.update_pmtu =		dn_dst_update_pmtu,
@@ -240,13 +244,14 @@ static void dn_dst_update_pmtu(struct dst_entry *dst, u32 mtu)
 
 	if (dst_metric(dst, RTAX_MTU) > mtu && mtu >= min_mtu) {
 		if (!(dst_metric_locked(dst, RTAX_MTU))) {
-			dst->metrics[RTAX_MTU-1] = mtu;
+			dst_metric_set(dst, RTAX_MTU, mtu);
 			dst_set_expires(dst, dn_rt_mtu_expires);
 		}
 		if (!(dst_metric_locked(dst, RTAX_ADVMSS))) {
 			u32 mss = mtu - DN_MAX_NSP_DATA_HEADER;
-			if (dst_metric(dst, RTAX_ADVMSS) > mss)
-				dst->metrics[RTAX_ADVMSS-1] = mss;
+			u32 existing_mss = dst_metric_raw(dst, RTAX_ADVMSS);
+			if (!existing_mss || existing_mss > mss)
+				dst_metric_set(dst, RTAX_ADVMSS, mss);
 		}
 	}
 }
@@ -271,10 +276,10 @@ static void dn_dst_link_failure(struct sk_buff *skb)
 
 static inline int compare_keys(struct flowi *fl1, struct flowi *fl2)
 {
-	return ((fl1->nl_u.dn_u.daddr ^ fl2->nl_u.dn_u.daddr) |
-		(fl1->nl_u.dn_u.saddr ^ fl2->nl_u.dn_u.saddr) |
+	return ((fl1->fld_dst ^ fl2->fld_dst) |
+		(fl1->fld_src ^ fl2->fld_src) |
 		(fl1->mark ^ fl2->mark) |
-		(fl1->nl_u.dn_u.scope ^ fl2->nl_u.dn_u.scope) |
+		(fl1->fld_scope ^ fl2->fld_scope) |
 		(fl1->oif ^ fl2->oif) |
 		(fl1->iif ^ fl2->iif)) == 0;
 }
@@ -795,19 +800,28 @@ static int dn_rt_bug(struct sk_buff *skb)
 	return NET_RX_DROP;
 }
 
+static unsigned int dn_dst_default_advmss(const struct dst_entry *dst)
+{
+	return dn_mss_from_pmtu(dst->dev, dst_mtu(dst));
+}
+
+static unsigned int dn_dst_default_mtu(const struct dst_entry *dst)
+{
+	return dst->dev->mtu;
+}
+
 static int dn_rt_set_next_hop(struct dn_route *rt, struct dn_fib_res *res)
 {
 	struct dn_fib_info *fi = res->fi;
 	struct net_device *dev = rt->dst.dev;
 	struct neighbour *n;
-	unsigned mss;
+	unsigned int metric;
 
 	if (fi) {
 		if (DN_FIB_RES_GW(*res) &&
 		    DN_FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK)
 			rt->rt_gateway = DN_FIB_RES_GW(*res);
-		memcpy(rt->dst.metrics, fi->fib_metrics,
-		       sizeof(rt->dst.metrics));
+		dst_import_metrics(&rt->dst, fi->fib_metrics);
 	}
 	rt->rt_type = res->type;
 
@@ -818,13 +832,14 @@ static int dn_rt_set_next_hop(struct dn_route *rt, struct dn_fib_res *res)
 		rt->dst.neighbour = n;
 	}
 
-	if (dst_metric(&rt->dst, RTAX_MTU) == 0 ||
-	    dst_metric(&rt->dst, RTAX_MTU) > rt->dst.dev->mtu)
-		rt->dst.metrics[RTAX_MTU-1] = rt->dst.dev->mtu;
-	mss = dn_mss_from_pmtu(dev, dst_mtu(&rt->dst));
-	if (dst_metric(&rt->dst, RTAX_ADVMSS) == 0 ||
-	    dst_metric(&rt->dst, RTAX_ADVMSS) > mss)
-		rt->dst.metrics[RTAX_ADVMSS-1] = mss;
+	if (dst_metric(&rt->dst, RTAX_MTU) > rt->dst.dev->mtu)
+		dst_metric_set(&rt->dst, RTAX_MTU, rt->dst.dev->mtu);
+	metric = dst_metric_raw(&rt->dst, RTAX_ADVMSS);
+	if (metric) {
+		unsigned int mss = dn_mss_from_pmtu(dev, dst_mtu(&rt->dst));
+		if (metric > mss)
+			dst_metric_set(&rt->dst, RTAX_ADVMSS, mss);
+	}
 	return 0;
 }
 
@@ -882,11 +897,9 @@ static inline __le16 dn_fib_rules_map_destination(__le16 daddr, struct dn_fib_re
 
 static int dn_route_output_slow(struct dst_entry **pprt, const struct flowi *oldflp, int try_hard)
 {
-	struct flowi fl = { .nl_u = { .dn_u =
-				      { .daddr = oldflp->fld_dst,
-					.saddr = oldflp->fld_src,
-					.scope = RT_SCOPE_UNIVERSE,
-				     } },
+	struct flowi fl = { .fld_dst = oldflp->fld_dst,
+			    .fld_src = oldflp->fld_src,
+			    .fld_scope = RT_SCOPE_UNIVERSE,
 			    .mark = oldflp->mark,
 			    .iif = init_net.loopback_dev->ifindex,
 			    .oif = oldflp->oif };
@@ -1230,11 +1243,9 @@ static int dn_route_input_slow(struct sk_buff *skb)
 	int flags = 0;
 	__le16 gateway = 0;
 	__le16 local_src = 0;
-	struct flowi fl = { .nl_u = { .dn_u =
-				     { .daddr = cb->dst,
-				       .saddr = cb->src,
-				       .scope = RT_SCOPE_UNIVERSE,
-				    } },
+	struct flowi fl = { .fld_dst = cb->dst,
+			    .fld_src = cb->src,
+			    .fld_scope = RT_SCOPE_UNIVERSE,
 			    .mark = skb->mark,
 			    .iif = skb->dev->ifindex };
 	struct dn_fib_res res = { .fi = NULL, .type = RTN_UNREACHABLE };
@@ -1506,7 +1517,7 @@ static int dn_rt_fill_info(struct sk_buff *skb, u32 pid, u32 seq,
 	RTA_PUT(skb, RTA_PREFSRC, 2, &rt->rt_local_src);
 	if (rt->rt_daddr != rt->rt_gateway)
 		RTA_PUT(skb, RTA_GATEWAY, 2, &rt->rt_gateway);
-	if (rtnetlink_put_metrics(skb, rt->dst.metrics) < 0)
+	if (rtnetlink_put_metrics(skb, dst_metrics_ptr(&rt->dst)) < 0)
 		goto rtattr_failure;
 	expires = rt->dst.expires ? rt->dst.expires - jiffies : 0;
 	if (rtnl_put_cacheinfo(skb, &rt->dst, 0, 0, 0, expires,
diff --git a/net/decnet/dn_rules.c b/net/decnet/dn_rules.c
index 48fdf10be7a..6eb91df3c55 100644
--- a/net/decnet/dn_rules.c
+++ b/net/decnet/dn_rules.c
@@ -175,7 +175,7 @@ static int dn_fib_rule_compare(struct fib_rule *rule, struct fib_rule_hdr *frh,
 
 unsigned dnet_addr_type(__le16 addr)
 {
-	struct flowi fl = { .nl_u = { .dn_u = { .daddr = addr } } };
+	struct flowi fl = { .fld_dst = addr };
 	struct dn_fib_res res;
 	unsigned ret = RTN_UNICAST;
 	struct dn_fib_table *tb = dn_fib_get_table(RT_TABLE_LOCAL, 0);
diff --git a/net/decnet/sysctl_net_decnet.c b/net/decnet/sysctl_net_decnet.c
index be3eb8e2328..28f8b5e5f73 100644
--- a/net/decnet/sysctl_net_decnet.c
+++ b/net/decnet/sysctl_net_decnet.c
@@ -38,7 +38,7 @@ int decnet_log_martians = 1;
 int decnet_no_fc_max_cwnd = NSP_MIN_WINDOW;
 
 /* Reasonable defaults, I hope, based on tcp's defaults */
-int sysctl_decnet_mem[3] = { 768 << 3, 1024 << 3, 1536 << 3 };
+long sysctl_decnet_mem[3] = { 768 << 3, 1024 << 3, 1536 << 3 };
 int sysctl_decnet_wmem[3] = { 4 * 1024, 16 * 1024, 128 * 1024 };
 int sysctl_decnet_rmem[3] = { 4 * 1024, 87380, 87380 * 2 };
 
@@ -324,7 +324,7 @@ static ctl_table dn_table[] = {
 		.data = &sysctl_decnet_mem,
 		.maxlen = sizeof(sysctl_decnet_mem),
 		.mode = 0644,
-		.proc_handler = proc_dointvec,
+		.proc_handler = proc_doulongvec_minmax
 	},
 	{
 		.procname = "decnet_rmem",
diff --git a/net/dns_resolver/Makefile b/net/dns_resolver/Makefile
index c0ef4e71dc4..d5c13c2eb36 100644
--- a/net/dns_resolver/Makefile
+++ b/net/dns_resolver/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_DNS_RESOLVER) += dns_resolver.o
 
-dns_resolver-objs :=  dns_key.o dns_query.o
+dns_resolver-y :=  dns_key.o dns_query.o
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 6112a12578b..0c877a74e1f 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -390,7 +390,7 @@ static int dsa_remove(struct platform_device *pdev)
 	if (dst->link_poll_needed)
 		del_timer_sync(&dst->link_poll_timer);
 
-	flush_scheduled_work();
+	flush_work_sync(&dst->link_poll_work);
 
 	for (i = 0; i < dst->pd->nr_chips; i++) {
 		struct dsa_switch *ds = dst->ds[i];
diff --git a/net/econet/Makefile b/net/econet/Makefile
index 39f0a77abdb..05fae8be2fe 100644
--- a/net/econet/Makefile
+++ b/net/econet/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_ECONET) += econet.o
 
-econet-objs := af_econet.o
+econet-y := af_econet.o
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index f8c1ae4b41f..15dcc1a586b 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -31,6 +31,7 @@
 #include <linux/skbuff.h>
 #include <linux/udp.h>
 #include <linux/slab.h>
+#include <linux/vmalloc.h>
 #include <net/sock.h>
 #include <net/inet_common.h>
 #include <linux/stat.h>
@@ -276,12 +277,12 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 #endif
 #ifdef CONFIG_ECONET_AUNUDP
 	struct msghdr udpmsg;
-	struct iovec iov[msg->msg_iovlen+1];
+	struct iovec iov[2];
 	struct aunhdr ah;
 	struct sockaddr_in udpdest;
 	__kernel_size_t size;
-	int i;
 	mm_segment_t oldfs;
+	char *userbuf;
 #endif
 
 	/*
@@ -297,23 +298,14 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 	mutex_lock(&econet_mutex);
 
-	if (saddr == NULL) {
-		struct econet_sock *eo = ec_sk(sk);
-
-		addr.station = eo->station;
-		addr.net     = eo->net;
-		port	     = eo->port;
-		cb	     = eo->cb;
-	} else {
-		if (msg->msg_namelen < sizeof(struct sockaddr_ec)) {
-			mutex_unlock(&econet_mutex);
-			return -EINVAL;
-		}
-		addr.station = saddr->addr.station;
-		addr.net = saddr->addr.net;
-		port = saddr->port;
-		cb = saddr->cb;
-	}
+        if (saddr == NULL || msg->msg_namelen < sizeof(struct sockaddr_ec)) {
+                mutex_unlock(&econet_mutex);
+                return -EINVAL;
+        }
+        addr.station = saddr->addr.station;
+        addr.net = saddr->addr.net;
+        port = saddr->port;
+        cb = saddr->cb;
 
 	/* Look for a device with the right network number. */
 	dev = net2dev_map[addr.net];
@@ -328,17 +320,17 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 		}
 	}
 
-	if (len + 15 > dev->mtu) {
-		mutex_unlock(&econet_mutex);
-		return -EMSGSIZE;
-	}
-
 	if (dev->type == ARPHRD_ECONET) {
 		/* Real hardware Econet.  We're not worthy etc. */
 #ifdef CONFIG_ECONET_NATIVE
 		unsigned short proto = 0;
 		int res;
 
+		if (len + 15 > dev->mtu) {
+			mutex_unlock(&econet_mutex);
+			return -EMSGSIZE;
+		}
+
 		dev_hold(dev);
 
 		skb = sock_alloc_send_skb(sk, len+LL_ALLOCATED_SPACE(dev),
@@ -351,7 +343,6 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 		eb = (struct ec_cb *)&skb->cb;
 
-		/* BUG: saddr may be NULL */
 		eb->cookie = saddr->cookie;
 		eb->sec = *saddr;
 		eb->sent = ec_tx_done;
@@ -415,6 +406,11 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 		return -ENETDOWN;		/* No socket - can't send */
 	}
 
+	if (len > 32768) {
+		err = -E2BIG;
+		goto error;
+	}
+
 	/* Make up a UDP datagram and hand it off to some higher intellect. */
 
 	memset(&udpdest, 0, sizeof(udpdest));
@@ -446,36 +442,26 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 
 	/* tack our header on the front of the iovec */
 	size = sizeof(struct aunhdr);
-	/*
-	 * XXX: that is b0rken.  We can't mix userland and kernel pointers
-	 * in iovec, since on a lot of platforms copy_from_user() will
-	 * *not* work with the kernel and userland ones at the same time,
-	 * regardless of what we do with set_fs().  And we are talking about
-	 * econet-over-ethernet here, so "it's only ARM anyway" doesn't
-	 * apply.  Any suggestions on fixing that code?		-- AV
-	 */
 	iov[0].iov_base = (void *)&ah;
 	iov[0].iov_len = size;
-	for (i = 0; i < msg->msg_iovlen; i++) {
-		void __user *base = msg->msg_iov[i].iov_base;
-		size_t iov_len = msg->msg_iov[i].iov_len;
-		/* Check it now since we switch to KERNEL_DS later. */
-		if (!access_ok(VERIFY_READ, base, iov_len)) {
-			mutex_unlock(&econet_mutex);
-			return -EFAULT;
-		}
-		iov[i+1].iov_base = base;
-		iov[i+1].iov_len = iov_len;
-		size += iov_len;
+
+	userbuf = vmalloc(len);
+	if (userbuf == NULL) {
+		err = -ENOMEM;
+		goto error;
 	}
 
+	iov[1].iov_base = userbuf;
+	iov[1].iov_len = len;
+	err = memcpy_fromiovec(userbuf, msg->msg_iov, len);
+	if (err)
+		goto error_free_buf;
+
 	/* Get a skbuff (no data, just holds our cb information) */
 	if ((skb = sock_alloc_send_skb(sk, 0,
 				       msg->msg_flags & MSG_DONTWAIT,
-				       &err)) == NULL) {
-		mutex_unlock(&econet_mutex);
-		return err;
-	}
+				       &err)) == NULL)
+		goto error_free_buf;
 
 	eb = (struct ec_cb *)&skb->cb;
 
@@ -491,7 +477,7 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 	udpmsg.msg_name = (void *)&udpdest;
 	udpmsg.msg_namelen = sizeof(udpdest);
 	udpmsg.msg_iov = &iov[0];
-	udpmsg.msg_iovlen = msg->msg_iovlen + 1;
+	udpmsg.msg_iovlen = 2;
 	udpmsg.msg_control = NULL;
 	udpmsg.msg_controllen = 0;
 	udpmsg.msg_flags=0;
@@ -499,9 +485,13 @@ static int econet_sendmsg(struct kiocb *iocb, struct socket *sock,
 	oldfs = get_fs(); set_fs(KERNEL_DS);	/* More privs :-) */
 	err = sock_sendmsg(udpsock, &udpmsg, size);
 	set_fs(oldfs);
+
+error_free_buf:
+	vfree(userbuf);
 #else
 	err = -EPROTOTYPE;
 #endif
+	error:
 	mutex_unlock(&econet_mutex);
 
 	return err;
@@ -671,6 +661,11 @@ static int ec_dev_ioctl(struct socket *sock, unsigned int cmd, void __user *arg)
 	err = 0;
 	switch (cmd) {
 	case SIOCSIFADDR:
+		if (!capable(CAP_NET_ADMIN)) {
+			err = -EPERM;
+			break;
+		}
+
 		edev = dev->ec_ptr;
 		if (edev == NULL) {
 			/* Magic up a new one. */
@@ -856,9 +851,13 @@ static void aun_incoming(struct sk_buff *skb, struct aunhdr *ah, size_t len)
 {
 	struct iphdr *ip = ip_hdr(skb);
 	unsigned char stn = ntohl(ip->saddr) & 0xff;
+	struct dst_entry *dst = skb_dst(skb);
+	struct ec_device *edev = NULL;
 	struct sock *sk = NULL;
 	struct sk_buff *newskb;
-	struct ec_device *edev = skb->dev->ec_ptr;
+
+	if (dst)
+		edev = dst->dev->ec_ptr;
 
 	if (! edev)
 		goto bad;
diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c
index 93c91b633a5..6df6ecf4970 100644
--- a/net/ieee802154/af_ieee802154.c
+++ b/net/ieee802154/af_ieee802154.c
@@ -52,11 +52,11 @@ struct net_device *ieee802154_get_dev(struct net *net,
 
 	switch (addr->addr_type) {
 	case IEEE802154_ADDR_LONG:
-		rtnl_lock();
-		dev = dev_getbyhwaddr(net, ARPHRD_IEEE802154, addr->hwaddr);
+		rcu_read_lock();
+		dev = dev_getbyhwaddr_rcu(net, ARPHRD_IEEE802154, addr->hwaddr);
 		if (dev)
 			dev_hold(dev);
-		rtnl_unlock();
+		rcu_read_unlock();
 		break;
 	case IEEE802154_ADDR_SHORT:
 		if (addr->pan_id == 0xffff ||
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index f581f77d109..f2b61107df6 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1148,21 +1148,13 @@ int inet_sk_rebuild_header(struct sock *sk)
 	struct flowi fl = {
 		.oif = sk->sk_bound_dev_if,
 		.mark = sk->sk_mark,
-		.nl_u = {
-			.ip4_u = {
-				.daddr	= daddr,
-				.saddr	= inet->inet_saddr,
-				.tos	= RT_CONN_FLAGS(sk),
-			},
-		},
+		.fl4_dst = daddr,
+		.fl4_src = inet->inet_saddr,
+		.fl4_tos = RT_CONN_FLAGS(sk),
 		.proto = sk->sk_protocol,
 		.flags = inet_sk_flowi_flags(sk),
-		.uli_u = {
-			.ports = {
-				.sport = inet->inet_sport,
-				.dport = inet->inet_dport,
-			},
-		},
+		.fl_ip_sport = inet->inet_sport,
+		.fl_ip_dport = inet->inet_dport,
 	};
 
 	security_sk_classify_flow(sk, &fl);
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index d8e540c5b07..a2fc7b961db 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -433,8 +433,8 @@ static int arp_ignore(struct in_device *in_dev, __be32 sip, __be32 tip)
 
 static int arp_filter(__be32 sip, __be32 tip, struct net_device *dev)
 {
-	struct flowi fl = { .nl_u = { .ip4_u = { .daddr = sip,
-						 .saddr = tip } } };
+	struct flowi fl = { .fl4_dst = sip,
+			    .fl4_src = tip };
 	struct rtable *rt;
 	int flag = 0;
 	/*unsigned long now; */
@@ -883,7 +883,7 @@ static int arp_process(struct sk_buff *skb)
 
 			dont_send = arp_ignore(in_dev, sip, tip);
 			if (!dont_send && IN_DEV_ARPFILTER(in_dev))
-				dont_send |= arp_filter(sip, tip, dev);
+				dont_send = arp_filter(sip, tip, dev);
 			if (!dont_send) {
 				n = neigh_event_ns(&arp_tbl, sha, &sip, dev);
 				if (n) {
@@ -1017,13 +1017,14 @@ static int arp_req_set_proxy(struct net *net, struct net_device *dev, int on)
 		IPV4_DEVCONF_ALL(net, PROXY_ARP) = on;
 		return 0;
 	}
-	if (__in_dev_get_rtnl(dev)) {
-		IN_DEV_CONF_SET(__in_dev_get_rtnl(dev), PROXY_ARP, on);
+	if (__in_dev_get_rcu(dev)) {
+		IN_DEV_CONF_SET(__in_dev_get_rcu(dev), PROXY_ARP, on);
 		return 0;
 	}
 	return -ENXIO;
 }
 
+/* must be called with rcu_read_lock() */
 static int arp_req_set_public(struct net *net, struct arpreq *r,
 		struct net_device *dev)
 {
@@ -1033,7 +1034,7 @@ static int arp_req_set_public(struct net *net, struct arpreq *r,
 	if (mask && mask != htonl(0xFFFFFFFF))
 		return -EINVAL;
 	if (!dev && (r->arp_flags & ATF_COM)) {
-		dev = dev_getbyhwaddr(net, r->arp_ha.sa_family,
+		dev = dev_getbyhwaddr_rcu(net, r->arp_ha.sa_family,
 				      r->arp_ha.sa_data);
 		if (!dev)
 			return -ENODEV;
@@ -1061,8 +1062,8 @@ static int arp_req_set(struct net *net, struct arpreq *r,
 	if (r->arp_flags & ATF_PERM)
 		r->arp_flags |= ATF_COM;
 	if (dev == NULL) {
-		struct flowi fl = { .nl_u.ip4_u = { .daddr = ip,
-						    .tos = RTO_ONLINK } };
+		struct flowi fl = { .fl4_dst = ip,
+				    .fl4_tos = RTO_ONLINK };
 		struct rtable *rt;
 		err = ip_route_output_key(net, &rt, &fl);
 		if (err != 0)
@@ -1169,8 +1170,8 @@ static int arp_req_delete(struct net *net, struct arpreq *r,
 
 	ip = ((struct sockaddr_in *)&r->arp_pa)->sin_addr.s_addr;
 	if (dev == NULL) {
-		struct flowi fl = { .nl_u.ip4_u = { .daddr = ip,
-						    .tos = RTO_ONLINK } };
+		struct flowi fl = { .fl4_dst = ip,
+				    .fl4_tos = RTO_ONLINK };
 		struct rtable *rt;
 		err = ip_route_output_key(net, &rt, &fl);
 		if (err != 0)
@@ -1225,10 +1226,10 @@ int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg)
 	if (!(r.arp_flags & ATF_NETMASK))
 		((struct sockaddr_in *)&r.arp_netmask)->sin_addr.s_addr =
 							   htonl(0xFFFFFFFFUL);
-	rtnl_lock();
+	rcu_read_lock();
 	if (r.arp_dev[0]) {
 		err = -ENODEV;
-		dev = __dev_get_by_name(net, r.arp_dev);
+		dev = dev_get_by_name_rcu(net, r.arp_dev);
 		if (dev == NULL)
 			goto out;
 
@@ -1252,12 +1253,12 @@ int arp_ioctl(struct net *net, unsigned int cmd, void __user *arg)
 		break;
 	case SIOCGARP:
 		err = arp_req_get(&r, dev);
-		if (!err && copy_to_user(arg, &r, sizeof(r)))
-			err = -EFAULT;
 		break;
 	}
 out:
-	rtnl_unlock();
+	rcu_read_unlock();
+	if (cmd == SIOCGARP && !err && copy_to_user(arg, &r, sizeof(r)))
+		err = -EFAULT;
 	return err;
 }
 
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index dc94b0316b7..748cb5b337b 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1256,6 +1256,87 @@ errout:
 		rtnl_set_sk_err(net, RTNLGRP_IPV4_IFADDR, err);
 }
 
+static size_t inet_get_link_af_size(const struct net_device *dev)
+{
+	struct in_device *in_dev = __in_dev_get_rtnl(dev);
+
+	if (!in_dev)
+		return 0;
+
+	return nla_total_size(IPV4_DEVCONF_MAX * 4); /* IFLA_INET_CONF */
+}
+
+static int inet_fill_link_af(struct sk_buff *skb, const struct net_device *dev)
+{
+	struct in_device *in_dev = __in_dev_get_rtnl(dev);
+	struct nlattr *nla;
+	int i;
+
+	if (!in_dev)
+		return -ENODATA;
+
+	nla = nla_reserve(skb, IFLA_INET_CONF, IPV4_DEVCONF_MAX * 4);
+	if (nla == NULL)
+		return -EMSGSIZE;
+
+	for (i = 0; i < IPV4_DEVCONF_MAX; i++)
+		((u32 *) nla_data(nla))[i] = in_dev->cnf.data[i];
+
+	return 0;
+}
+
+static const struct nla_policy inet_af_policy[IFLA_INET_MAX+1] = {
+	[IFLA_INET_CONF]	= { .type = NLA_NESTED },
+};
+
+static int inet_validate_link_af(const struct net_device *dev,
+				 const struct nlattr *nla)
+{
+	struct nlattr *a, *tb[IFLA_INET_MAX+1];
+	int err, rem;
+
+	if (dev && !__in_dev_get_rtnl(dev))
+		return -EAFNOSUPPORT;
+
+	err = nla_parse_nested(tb, IFLA_INET_MAX, nla, inet_af_policy);
+	if (err < 0)
+		return err;
+
+	if (tb[IFLA_INET_CONF]) {
+		nla_for_each_nested(a, tb[IFLA_INET_CONF], rem) {
+			int cfgid = nla_type(a);
+
+			if (nla_len(a) < 4)
+				return -EINVAL;
+
+			if (cfgid <= 0 || cfgid > IPV4_DEVCONF_MAX)
+				return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int inet_set_link_af(struct net_device *dev, const struct nlattr *nla)
+{
+	struct in_device *in_dev = __in_dev_get_rtnl(dev);
+	struct nlattr *a, *tb[IFLA_INET_MAX+1];
+	int rem;
+
+	if (!in_dev)
+		return -EAFNOSUPPORT;
+
+	if (nla_parse_nested(tb, IFLA_INET_MAX, nla, NULL) < 0)
+		BUG();
+
+	if (tb[IFLA_INET_CONF]) {
+		nla_for_each_nested(a, tb[IFLA_INET_CONF], rem)
+			ipv4_devconf_set(in_dev, nla_type(a), nla_get_u32(a));
+	}
+
+	return 0;
+}
+
 #ifdef CONFIG_SYSCTL
 
 static void devinet_copy_dflt_conf(struct net *net, int i)
@@ -1349,9 +1430,9 @@ static int devinet_sysctl_forward(ctl_table *ctl, int write,
 	return ret;
 }
 
-int ipv4_doint_and_flush(ctl_table *ctl, int write,
-			 void __user *buffer,
-			 size_t *lenp, loff_t *ppos)
+static int ipv4_doint_and_flush(ctl_table *ctl, int write,
+				void __user *buffer,
+				size_t *lenp, loff_t *ppos)
 {
 	int *valp = ctl->data;
 	int val = *valp;
@@ -1619,6 +1700,14 @@ static __net_initdata struct pernet_operations devinet_ops = {
 	.exit = devinet_exit_net,
 };
 
+static struct rtnl_af_ops inet_af_ops = {
+	.family		  = AF_INET,
+	.fill_link_af	  = inet_fill_link_af,
+	.get_link_af_size = inet_get_link_af_size,
+	.validate_link_af = inet_validate_link_af,
+	.set_link_af	  = inet_set_link_af,
+};
+
 void __init devinet_init(void)
 {
 	register_pernet_subsys(&devinet_ops);
@@ -1626,6 +1715,8 @@ void __init devinet_init(void)
 	register_gifconf(PF_INET, inet_gifconf);
 	register_netdevice_notifier(&ip_netdev_notifier);
 
+	rtnl_af_register(&inet_af_ops);
+
 	rtnl_register(PF_INET, RTM_NEWADDR, inet_rtm_newaddr, NULL);
 	rtnl_register(PF_INET, RTM_DELADDR, inet_rtm_deladdr, NULL);
 	rtnl_register(PF_INET, RTM_GETADDR, NULL, inet_dump_ifaddr);
diff --git a/net/ipv4/esp4.c b/net/ipv4/esp4.c
index 14ca1f1c3fb..e42a905180f 100644
--- a/net/ipv4/esp4.c
+++ b/net/ipv4/esp4.c
@@ -23,6 +23,8 @@ struct esp_skb_cb {
 
 #define ESP_SKB_CB(__skb) ((struct esp_skb_cb *)&((__skb)->cb[0]))
 
+static u32 esp4_get_mtu(struct xfrm_state *x, int mtu);
+
 /*
  * Allocate an AEAD request structure with extra space for SG and IV.
  *
@@ -117,25 +119,35 @@ static int esp_output(struct xfrm_state *x, struct sk_buff *skb)
 	int blksize;
 	int clen;
 	int alen;
+	int plen;
+	int tfclen;
 	int nfrags;
 
 	/* skb is pure payload to encrypt */
 
 	err = -ENOMEM;
 
-	/* Round to block size */
-	clen = skb->len;
-
 	esp = x->data;
 	aead = esp->aead;
 	alen = crypto_aead_authsize(aead);
 
+	tfclen = 0;
+	if (x->tfcpad) {
+		struct xfrm_dst *dst = (struct xfrm_dst *)skb_dst(skb);
+		u32 padto;
+
+		padto = min(x->tfcpad, esp4_get_mtu(x, dst->child_mtu_cached));
+		if (skb->len < padto)
+			tfclen = padto - skb->len;
+	}
 	blksize = ALIGN(crypto_aead_blocksize(aead), 4);
-	clen = ALIGN(clen + 2, blksize);
+	clen = ALIGN(skb->len + 2 + tfclen, blksize);
 	if (esp->padlen)
 		clen = ALIGN(clen, esp->padlen);
+	plen = clen - skb->len - tfclen;
 
-	if ((err = skb_cow_data(skb, clen - skb->len + alen, &trailer)) < 0)
+	err = skb_cow_data(skb, tfclen + plen + alen, &trailer);
+	if (err < 0)
 		goto error;
 	nfrags = err;
 
@@ -150,13 +162,17 @@ static int esp_output(struct xfrm_state *x, struct sk_buff *skb)
 
 	/* Fill padding... */
 	tail = skb_tail_pointer(trailer);
+	if (tfclen) {
+		memset(tail, 0, tfclen);
+		tail += tfclen;
+	}
 	do {
 		int i;
-		for (i=0; i<clen-skb->len - 2; i++)
+		for (i = 0; i < plen - 2; i++)
 			tail[i] = i + 1;
 	} while (0);
-	tail[clen - skb->len - 2] = (clen - skb->len) - 2;
-	tail[clen - skb->len - 1] = *skb_mac_header(skb);
+	tail[plen - 2] = plen - 2;
+	tail[plen - 1] = *skb_mac_header(skb);
 	pskb_put(skb, trailer, clen - skb->len + alen);
 
 	skb_push(skb, -skb_network_offset(skb));
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index eb6f69a8f27..1d2cdd43a87 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -158,18 +158,20 @@ static void fib_flush(struct net *net)
 struct net_device *__ip_dev_find(struct net *net, __be32 addr, bool devref)
 {
 	struct flowi fl = {
-		.nl_u = {
-			.ip4_u = {
-				.daddr = addr
-			}
-		},
-		.flags = FLOWI_FLAG_MATCH_ANY_IIF
+		.fl4_dst = addr,
 	};
 	struct fib_result res = { 0 };
 	struct net_device *dev = NULL;
+	struct fib_table *local_table;
+
+#ifdef CONFIG_IP_MULTIPLE_TABLES
+	res.r = NULL;
+#endif
 
 	rcu_read_lock();
-	if (fib_lookup(net, &fl, &res)) {
+	local_table = fib_get_table(net, RT_TABLE_LOCAL);
+	if (!local_table ||
+	    fib_table_lookup(local_table, &fl, &res, FIB_LOOKUP_NOREF)) {
 		rcu_read_unlock();
 		return NULL;
 	}
@@ -193,7 +195,7 @@ static inline unsigned __inet_dev_addr_type(struct net *net,
 					    const struct net_device *dev,
 					    __be32 addr)
 {
-	struct flowi		fl = { .nl_u = { .ip4_u = { .daddr = addr } } };
+	struct flowi		fl = { .fl4_dst = addr };
 	struct fib_result	res;
 	unsigned ret = RTN_BROADCAST;
 	struct fib_table *local_table;
@@ -247,13 +249,9 @@ int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
 {
 	struct in_device *in_dev;
 	struct flowi fl = {
-		.nl_u = {
-			.ip4_u = {
-				.daddr = src,
-				.saddr = dst,
-				.tos = tos
-			}
-		},
+		.fl4_dst = src,
+		.fl4_src = dst,
+		.fl4_tos = tos,
 		.mark = mark,
 		.iif = oif
 	};
@@ -853,13 +851,9 @@ static void nl_fib_lookup(struct fib_result_nl *frn, struct fib_table *tb)
 	struct fib_result       res;
 	struct flowi            fl = {
 		.mark = frn->fl_mark,
-		.nl_u = {
-			.ip4_u = {
-				.daddr = frn->fl_addr,
-				.tos = frn->fl_tos,
-				.scope = frn->fl_scope
-			}
-		}
+		.fl4_dst = frn->fl_addr,
+		.fl4_tos = frn->fl_tos,
+		.fl4_scope = frn->fl_scope,
 	};
 
 #ifdef CONFIG_IP_MULTIPLE_TABLES
@@ -999,7 +993,11 @@ static int fib_netdev_event(struct notifier_block *this, unsigned long event, vo
 		rt_cache_flush(dev_net(dev), 0);
 		break;
 	case NETDEV_UNREGISTER_BATCH:
-		rt_cache_flush_batch();
+		/* The batch unregister is only called on the first
+		 * device in the list of devices being unregistered.
+		 * Therefore we should not pass dev_net(dev) in here.
+		 */
+		rt_cache_flush_batch(NULL);
 		break;
 	}
 	return NOTIFY_DONE;
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index a72c62d0310..9aff11d7278 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -563,12 +563,8 @@ static int fib_check_nh(struct fib_config *cfg, struct fib_info *fi,
 		rcu_read_lock();
 		{
 			struct flowi fl = {
-				.nl_u = {
-					.ip4_u = {
-						.daddr = nh->nh_gw,
-						.scope = cfg->fc_scope + 1,
-					},
-				},
+				.fl4_dst = nh->nh_gw,
+				.fl4_scope = cfg->fc_scope + 1,
 				.oif = nh->nh_oif,
 			};
 
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 200eb538fbb..0f280348e0f 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -365,7 +365,7 @@ static struct tnode *tnode_alloc(size_t size)
 	if (size <= PAGE_SIZE)
 		return kzalloc(size, GFP_KERNEL);
 	else
-		return __vmalloc(size, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+		return vzalloc(size);
 }
 
 static void __tnode_vfree(struct work_struct *arg)
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index c6e2affafbd..4aa1b7f01ea 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -386,10 +386,9 @@ static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
 			daddr = icmp_param->replyopts.faddr;
 	}
 	{
-		struct flowi fl = { .nl_u = { .ip4_u =
-					      { .daddr = daddr,
-						.saddr = rt->rt_spec_dst,
-						.tos = RT_TOS(ip_hdr(skb)->tos) } },
+		struct flowi fl = { .fl4_dst= daddr,
+				    .fl4_src = rt->rt_spec_dst,
+				    .fl4_tos = RT_TOS(ip_hdr(skb)->tos),
 				    .proto = IPPROTO_ICMP };
 		security_skb_classify_flow(skb, &fl);
 		if (ip_route_output_key(net, &rt, &fl))
@@ -542,22 +541,13 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 
 	{
 		struct flowi fl = {
-			.nl_u = {
-				.ip4_u = {
-					.daddr = icmp_param.replyopts.srr ?
-						icmp_param.replyopts.faddr :
-						iph->saddr,
-					.saddr = saddr,
-					.tos = RT_TOS(tos)
-				}
-			},
+			.fl4_dst = icmp_param.replyopts.srr ?
+				   icmp_param.replyopts.faddr : iph->saddr,
+			.fl4_src = saddr,
+			.fl4_tos = RT_TOS(tos),
 			.proto = IPPROTO_ICMP,
-			.uli_u = {
-				.icmpt = {
-					.type = type,
-					.code = code
-				}
-			}
+			.fl_icmp_type = type,
+			.fl_icmp_code = code,
 		};
 		int err;
 		struct rtable *rt2;
@@ -569,6 +559,9 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 		/* No need to clone since we're just using its address. */
 		rt2 = rt;
 
+		if (!fl.nl_u.ip4_u.saddr)
+			fl.nl_u.ip4_u.saddr = rt->rt_src;
+
 		err = xfrm_lookup(net, (struct dst_entry **)&rt, &fl, NULL, 0);
 		switch (err) {
 		case 0:
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 08d0d81ffc1..e0e77e297de 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -149,21 +149,37 @@ static void ip_mc_clear_src(struct ip_mc_list *pmc);
 static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
 			 int sfcount, __be32 *psfsrc, int delta);
 
+
+static void ip_mc_list_reclaim(struct rcu_head *head)
+{
+	kfree(container_of(head, struct ip_mc_list, rcu));
+}
+
 static void ip_ma_put(struct ip_mc_list *im)
 {
 	if (atomic_dec_and_test(&im->refcnt)) {
 		in_dev_put(im->interface);
-		kfree(im);
+		call_rcu(&im->rcu, ip_mc_list_reclaim);
 	}
 }
 
+#define for_each_pmc_rcu(in_dev, pmc)				\
+	for (pmc = rcu_dereference(in_dev->mc_list);		\
+	     pmc != NULL;					\
+	     pmc = rcu_dereference(pmc->next_rcu))
+
+#define for_each_pmc_rtnl(in_dev, pmc)				\
+	for (pmc = rtnl_dereference(in_dev->mc_list);		\
+	     pmc != NULL;					\
+	     pmc = rtnl_dereference(pmc->next_rcu))
+
 #ifdef CONFIG_IP_MULTICAST
 
 /*
  *	Timer management
  */
 
-static __inline__ void igmp_stop_timer(struct ip_mc_list *im)
+static void igmp_stop_timer(struct ip_mc_list *im)
 {
 	spin_lock_bh(&im->lock);
 	if (del_timer(&im->timer))
@@ -284,6 +300,8 @@ igmp_scount(struct ip_mc_list *pmc, int type, int gdeleted, int sdeleted)
 	return scount;
 }
 
+#define igmp_skb_size(skb) (*(unsigned int *)((skb)->cb))
+
 static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 {
 	struct sk_buff *skb;
@@ -292,14 +310,20 @@ static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
 	struct igmpv3_report *pig;
 	struct net *net = dev_net(dev);
 
-	skb = alloc_skb(size + LL_ALLOCATED_SPACE(dev), GFP_ATOMIC);
-	if (skb == NULL)
-		return NULL;
+	while (1) {
+		skb = alloc_skb(size + LL_ALLOCATED_SPACE(dev),
+				GFP_ATOMIC | __GFP_NOWARN);
+		if (skb)
+			break;
+		size >>= 1;
+		if (size < 256)
+			return NULL;
+	}
+	igmp_skb_size(skb) = size;
 
 	{
 		struct flowi fl = { .oif = dev->ifindex,
-				    .nl_u = { .ip4_u = {
-				    .daddr = IGMPV3_ALL_MCR } },
+				    .fl4_dst = IGMPV3_ALL_MCR,
 				    .proto = IPPROTO_IGMP };
 		if (ip_route_output_key(net, &rt, &fl)) {
 			kfree_skb(skb);
@@ -384,7 +408,7 @@ static struct sk_buff *add_grhead(struct sk_buff *skb, struct ip_mc_list *pmc,
 	return skb;
 }
 
-#define AVAILABLE(skb) ((skb) ? ((skb)->dev ? (skb)->dev->mtu - (skb)->len : \
+#define AVAILABLE(skb) ((skb) ? ((skb)->dev ? igmp_skb_size(skb) - (skb)->len : \
 	skb_tailroom(skb)) : 0)
 
 static struct sk_buff *add_grec(struct sk_buff *skb, struct ip_mc_list *pmc,
@@ -502,8 +526,8 @@ static int igmpv3_send_report(struct in_device *in_dev, struct ip_mc_list *pmc)
 	int type;
 
 	if (!pmc) {
-		read_lock(&in_dev->mc_list_lock);
-		for (pmc=in_dev->mc_list; pmc; pmc=pmc->next) {
+		rcu_read_lock();
+		for_each_pmc_rcu(in_dev, pmc) {
 			if (pmc->multiaddr == IGMP_ALL_HOSTS)
 				continue;
 			spin_lock_bh(&pmc->lock);
@@ -514,7 +538,7 @@ static int igmpv3_send_report(struct in_device *in_dev, struct ip_mc_list *pmc)
 			skb = add_grec(skb, pmc, type, 0, 0);
 			spin_unlock_bh(&pmc->lock);
 		}
-		read_unlock(&in_dev->mc_list_lock);
+		rcu_read_unlock();
 	} else {
 		spin_lock_bh(&pmc->lock);
 		if (pmc->sfcount[MCAST_EXCLUDE])
@@ -556,7 +580,7 @@ static void igmpv3_send_cr(struct in_device *in_dev)
 	struct sk_buff *skb = NULL;
 	int type, dtype;
 
-	read_lock(&in_dev->mc_list_lock);
+	rcu_read_lock();
 	spin_lock_bh(&in_dev->mc_tomb_lock);
 
 	/* deleted MCA's */
@@ -593,7 +617,7 @@ static void igmpv3_send_cr(struct in_device *in_dev)
 	spin_unlock_bh(&in_dev->mc_tomb_lock);
 
 	/* change recs */
-	for (pmc=in_dev->mc_list; pmc; pmc=pmc->next) {
+	for_each_pmc_rcu(in_dev, pmc) {
 		spin_lock_bh(&pmc->lock);
 		if (pmc->sfcount[MCAST_EXCLUDE]) {
 			type = IGMPV3_BLOCK_OLD_SOURCES;
@@ -616,7 +640,7 @@ static void igmpv3_send_cr(struct in_device *in_dev)
 		}
 		spin_unlock_bh(&pmc->lock);
 	}
-	read_unlock(&in_dev->mc_list_lock);
+	rcu_read_unlock();
 
 	if (!skb)
 		return;
@@ -644,7 +668,7 @@ static int igmp_send_report(struct in_device *in_dev, struct ip_mc_list *pmc,
 
 	{
 		struct flowi fl = { .oif = dev->ifindex,
-				    .nl_u = { .ip4_u = { .daddr = dst } },
+				    .fl4_dst = dst,
 				    .proto = IPPROTO_IGMP };
 		if (ip_route_output_key(net, &rt, &fl))
 			return -1;
@@ -813,14 +837,14 @@ static void igmp_heard_report(struct in_device *in_dev, __be32 group)
 	if (group == IGMP_ALL_HOSTS)
 		return;
 
-	read_lock(&in_dev->mc_list_lock);
-	for (im=in_dev->mc_list; im!=NULL; im=im->next) {
+	rcu_read_lock();
+	for_each_pmc_rcu(in_dev, im) {
 		if (im->multiaddr == group) {
 			igmp_stop_timer(im);
 			break;
 		}
 	}
-	read_unlock(&in_dev->mc_list_lock);
+	rcu_read_unlock();
 }
 
 static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
@@ -906,8 +930,8 @@ static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
 	 * - Use the igmp->igmp_code field as the maximum
 	 *   delay possible
 	 */
-	read_lock(&in_dev->mc_list_lock);
-	for (im=in_dev->mc_list; im!=NULL; im=im->next) {
+	rcu_read_lock();
+	for_each_pmc_rcu(in_dev, im) {
 		int changed;
 
 		if (group && group != im->multiaddr)
@@ -925,7 +949,7 @@ static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb,
 		if (changed)
 			igmp_mod_timer(im, max_delay);
 	}
-	read_unlock(&in_dev->mc_list_lock);
+	rcu_read_unlock();
 }
 
 /* called in rcu_read_lock() section */
@@ -1110,8 +1134,8 @@ static void igmpv3_clear_delrec(struct in_device *in_dev)
 		kfree(pmc);
 	}
 	/* clear dead sources, too */
-	read_lock(&in_dev->mc_list_lock);
-	for (pmc=in_dev->mc_list; pmc; pmc=pmc->next) {
+	rcu_read_lock();
+	for_each_pmc_rcu(in_dev, pmc) {
 		struct ip_sf_list *psf, *psf_next;
 
 		spin_lock_bh(&pmc->lock);
@@ -1123,7 +1147,7 @@ static void igmpv3_clear_delrec(struct in_device *in_dev)
 			kfree(psf);
 		}
 	}
-	read_unlock(&in_dev->mc_list_lock);
+	rcu_read_unlock();
 }
 #endif
 
@@ -1209,7 +1233,7 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr)
 
 	ASSERT_RTNL();
 
-	for (im=in_dev->mc_list; im; im=im->next) {
+	for_each_pmc_rtnl(in_dev, im) {
 		if (im->multiaddr == addr) {
 			im->users++;
 			ip_mc_add_src(in_dev, &addr, MCAST_EXCLUDE, 0, NULL, 0);
@@ -1217,7 +1241,7 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr)
 		}
 	}
 
-	im = kmalloc(sizeof(*im), GFP_KERNEL);
+	im = kzalloc(sizeof(*im), GFP_KERNEL);
 	if (!im)
 		goto out;
 
@@ -1227,26 +1251,18 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr)
 	im->multiaddr = addr;
 	/* initial mode is (EX, empty) */
 	im->sfmode = MCAST_EXCLUDE;
-	im->sfcount[MCAST_INCLUDE] = 0;
 	im->sfcount[MCAST_EXCLUDE] = 1;
-	im->sources = NULL;
-	im->tomb = NULL;
-	im->crcount = 0;
 	atomic_set(&im->refcnt, 1);
 	spin_lock_init(&im->lock);
 #ifdef CONFIG_IP_MULTICAST
-	im->tm_running = 0;
 	setup_timer(&im->timer, &igmp_timer_expire, (unsigned long)im);
 	im->unsolicit_count = IGMP_Unsolicited_Report_Count;
-	im->reporter = 0;
-	im->gsquery = 0;
 #endif
-	im->loaded = 0;
-	write_lock_bh(&in_dev->mc_list_lock);
-	im->next = in_dev->mc_list;
-	in_dev->mc_list = im;
+
+	im->next_rcu = in_dev->mc_list;
 	in_dev->mc_count++;
-	write_unlock_bh(&in_dev->mc_list_lock);
+	rcu_assign_pointer(in_dev->mc_list, im);
+
 #ifdef CONFIG_IP_MULTICAST
 	igmpv3_del_delrec(in_dev, im->multiaddr);
 #endif
@@ -1260,26 +1276,32 @@ EXPORT_SYMBOL(ip_mc_inc_group);
 
 /*
  *	Resend IGMP JOIN report; used for bonding.
+ *	Called with rcu_read_lock()
  */
-void ip_mc_rejoin_group(struct ip_mc_list *im)
+void ip_mc_rejoin_groups(struct in_device *in_dev)
 {
 #ifdef CONFIG_IP_MULTICAST
-	struct in_device *in_dev = im->interface;
+	struct ip_mc_list *im;
+	int type;
 
-	if (im->multiaddr == IGMP_ALL_HOSTS)
-		return;
+	for_each_pmc_rcu(in_dev, im) {
+		if (im->multiaddr == IGMP_ALL_HOSTS)
+			continue;
 
-	/* a failover is happening and switches
-	 * must be notified immediately */
-	if (IGMP_V1_SEEN(in_dev))
-		igmp_send_report(in_dev, im, IGMP_HOST_MEMBERSHIP_REPORT);
-	else if (IGMP_V2_SEEN(in_dev))
-		igmp_send_report(in_dev, im, IGMPV2_HOST_MEMBERSHIP_REPORT);
-	else
-		igmp_send_report(in_dev, im, IGMPV3_HOST_MEMBERSHIP_REPORT);
+		/* a failover is happening and switches
+		 * must be notified immediately
+		 */
+		if (IGMP_V1_SEEN(in_dev))
+			type = IGMP_HOST_MEMBERSHIP_REPORT;
+		else if (IGMP_V2_SEEN(in_dev))
+			type = IGMPV2_HOST_MEMBERSHIP_REPORT;
+		else
+			type = IGMPV3_HOST_MEMBERSHIP_REPORT;
+		igmp_send_report(in_dev, im, type);
+	}
 #endif
 }
-EXPORT_SYMBOL(ip_mc_rejoin_group);
+EXPORT_SYMBOL(ip_mc_rejoin_groups);
 
 /*
  *	A socket has left a multicast group on device dev
@@ -1287,17 +1309,18 @@ EXPORT_SYMBOL(ip_mc_rejoin_group);
 
 void ip_mc_dec_group(struct in_device *in_dev, __be32 addr)
 {
-	struct ip_mc_list *i, **ip;
+	struct ip_mc_list *i;
+	struct ip_mc_list __rcu **ip;
 
 	ASSERT_RTNL();
 
-	for (ip=&in_dev->mc_list; (i=*ip)!=NULL; ip=&i->next) {
+	for (ip = &in_dev->mc_list;
+	     (i = rtnl_dereference(*ip)) != NULL;
+	     ip = &i->next_rcu) {
 		if (i->multiaddr == addr) {
 			if (--i->users == 0) {
-				write_lock_bh(&in_dev->mc_list_lock);
-				*ip = i->next;
+				*ip = i->next_rcu;
 				in_dev->mc_count--;
-				write_unlock_bh(&in_dev->mc_list_lock);
 				igmp_group_dropped(i);
 
 				if (!in_dev->dead)
@@ -1316,34 +1339,34 @@ EXPORT_SYMBOL(ip_mc_dec_group);
 
 void ip_mc_unmap(struct in_device *in_dev)
 {
-	struct ip_mc_list *i;
+	struct ip_mc_list *pmc;
 
 	ASSERT_RTNL();
 
-	for (i = in_dev->mc_list; i; i = i->next)
-		igmp_group_dropped(i);
+	for_each_pmc_rtnl(in_dev, pmc)
+		igmp_group_dropped(pmc);
 }
 
 void ip_mc_remap(struct in_device *in_dev)
 {
-	struct ip_mc_list *i;
+	struct ip_mc_list *pmc;
 
 	ASSERT_RTNL();
 
-	for (i = in_dev->mc_list; i; i = i->next)
-		igmp_group_added(i);
+	for_each_pmc_rtnl(in_dev, pmc)
+		igmp_group_added(pmc);
 }
 
 /* Device going down */
 
 void ip_mc_down(struct in_device *in_dev)
 {
-	struct ip_mc_list *i;
+	struct ip_mc_list *pmc;
 
 	ASSERT_RTNL();
 
-	for (i=in_dev->mc_list; i; i=i->next)
-		igmp_group_dropped(i);
+	for_each_pmc_rtnl(in_dev, pmc)
+		igmp_group_dropped(pmc);
 
 #ifdef CONFIG_IP_MULTICAST
 	in_dev->mr_ifc_count = 0;
@@ -1374,7 +1397,6 @@ void ip_mc_init_dev(struct in_device *in_dev)
 	in_dev->mr_qrv = IGMP_Unsolicited_Report_Count;
 #endif
 
-	rwlock_init(&in_dev->mc_list_lock);
 	spin_lock_init(&in_dev->mc_tomb_lock);
 }
 
@@ -1382,14 +1404,14 @@ void ip_mc_init_dev(struct in_device *in_dev)
 
 void ip_mc_up(struct in_device *in_dev)
 {
-	struct ip_mc_list *i;
+	struct ip_mc_list *pmc;
 
 	ASSERT_RTNL();
 
 	ip_mc_inc_group(in_dev, IGMP_ALL_HOSTS);
 
-	for (i=in_dev->mc_list; i; i=i->next)
-		igmp_group_added(i);
+	for_each_pmc_rtnl(in_dev, pmc)
+		igmp_group_added(pmc);
 }
 
 /*
@@ -1405,24 +1427,19 @@ void ip_mc_destroy_dev(struct in_device *in_dev)
 	/* Deactivate timers */
 	ip_mc_down(in_dev);
 
-	write_lock_bh(&in_dev->mc_list_lock);
-	while ((i = in_dev->mc_list) != NULL) {
-		in_dev->mc_list = i->next;
+	while ((i = rtnl_dereference(in_dev->mc_list)) != NULL) {
+		in_dev->mc_list = i->next_rcu;
 		in_dev->mc_count--;
-		write_unlock_bh(&in_dev->mc_list_lock);
+
 		igmp_group_dropped(i);
 		ip_ma_put(i);
-
-		write_lock_bh(&in_dev->mc_list_lock);
 	}
-	write_unlock_bh(&in_dev->mc_list_lock);
 }
 
 /* RTNL is locked */
 static struct in_device *ip_mc_find_dev(struct net *net, struct ip_mreqn *imr)
 {
-	struct flowi fl = { .nl_u = { .ip4_u =
-				      { .daddr = imr->imr_multiaddr.s_addr } } };
+	struct flowi fl = { .fl4_dst = imr->imr_multiaddr.s_addr };
 	struct rtable *rt;
 	struct net_device *dev = NULL;
 	struct in_device *idev = NULL;
@@ -1513,18 +1530,18 @@ static int ip_mc_del_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
 
 	if (!in_dev)
 		return -ENODEV;
-	read_lock(&in_dev->mc_list_lock);
-	for (pmc=in_dev->mc_list; pmc; pmc=pmc->next) {
+	rcu_read_lock();
+	for_each_pmc_rcu(in_dev, pmc) {
 		if (*pmca == pmc->multiaddr)
 			break;
 	}
 	if (!pmc) {
 		/* MCA not found?? bug */
-		read_unlock(&in_dev->mc_list_lock);
+		rcu_read_unlock();
 		return -ESRCH;
 	}
 	spin_lock_bh(&pmc->lock);
-	read_unlock(&in_dev->mc_list_lock);
+	rcu_read_unlock();
 #ifdef CONFIG_IP_MULTICAST
 	sf_markstate(pmc);
 #endif
@@ -1685,18 +1702,18 @@ static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
 
 	if (!in_dev)
 		return -ENODEV;
-	read_lock(&in_dev->mc_list_lock);
-	for (pmc=in_dev->mc_list; pmc; pmc=pmc->next) {
+	rcu_read_lock();
+	for_each_pmc_rcu(in_dev, pmc) {
 		if (*pmca == pmc->multiaddr)
 			break;
 	}
 	if (!pmc) {
 		/* MCA not found?? bug */
-		read_unlock(&in_dev->mc_list_lock);
+		rcu_read_unlock();
 		return -ESRCH;
 	}
 	spin_lock_bh(&pmc->lock);
-	read_unlock(&in_dev->mc_list_lock);
+	rcu_read_unlock();
 
 #ifdef CONFIG_IP_MULTICAST
 	sf_markstate(pmc);
@@ -1793,7 +1810,7 @@ int ip_mc_join_group(struct sock *sk , struct ip_mreqn *imr)
 
 	err = -EADDRINUSE;
 	ifindex = imr->imr_ifindex;
-	for (i = inet->mc_list; i; i = i->next) {
+	for_each_pmc_rtnl(inet, i) {
 		if (i->multi.imr_multiaddr.s_addr == addr &&
 		    i->multi.imr_ifindex == ifindex)
 			goto done;
@@ -1807,7 +1824,7 @@ int ip_mc_join_group(struct sock *sk , struct ip_mreqn *imr)
 		goto done;
 
 	memcpy(&iml->multi, imr, sizeof(*imr));
-	iml->next = inet->mc_list;
+	iml->next_rcu = inet->mc_list;
 	iml->sflist = NULL;
 	iml->sfmode = MCAST_EXCLUDE;
 	rcu_assign_pointer(inet->mc_list, iml);
@@ -1821,17 +1838,14 @@ EXPORT_SYMBOL(ip_mc_join_group);
 
 static void ip_sf_socklist_reclaim(struct rcu_head *rp)
 {
-	struct ip_sf_socklist *psf;
-
-	psf = container_of(rp, struct ip_sf_socklist, rcu);
+	kfree(container_of(rp, struct ip_sf_socklist, rcu));
 	/* sk_omem_alloc should have been decreased by the caller*/
-	kfree(psf);
 }
 
 static int ip_mc_leave_src(struct sock *sk, struct ip_mc_socklist *iml,
 			   struct in_device *in_dev)
 {
-	struct ip_sf_socklist *psf = iml->sflist;
+	struct ip_sf_socklist *psf = rtnl_dereference(iml->sflist);
 	int err;
 
 	if (psf == NULL) {
@@ -1851,11 +1865,8 @@ static int ip_mc_leave_src(struct sock *sk, struct ip_mc_socklist *iml,
 
 static void ip_mc_socklist_reclaim(struct rcu_head *rp)
 {
-	struct ip_mc_socklist *iml;
-
-	iml = container_of(rp, struct ip_mc_socklist, rcu);
+	kfree(container_of(rp, struct ip_mc_socklist, rcu));
 	/* sk_omem_alloc should have been decreased by the caller*/
-	kfree(iml);
 }
 
 
@@ -1866,7 +1877,8 @@ static void ip_mc_socklist_reclaim(struct rcu_head *rp)
 int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr)
 {
 	struct inet_sock *inet = inet_sk(sk);
-	struct ip_mc_socklist *iml, **imlp;
+	struct ip_mc_socklist *iml;
+	struct ip_mc_socklist __rcu **imlp;
 	struct in_device *in_dev;
 	struct net *net = sock_net(sk);
 	__be32 group = imr->imr_multiaddr.s_addr;
@@ -1876,7 +1888,9 @@ int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr)
 	rtnl_lock();
 	in_dev = ip_mc_find_dev(net, imr);
 	ifindex = imr->imr_ifindex;
-	for (imlp = &inet->mc_list; (iml = *imlp) != NULL; imlp = &iml->next) {
+	for (imlp = &inet->mc_list;
+	     (iml = rtnl_dereference(*imlp)) != NULL;
+	     imlp = &iml->next_rcu) {
 		if (iml->multi.imr_multiaddr.s_addr != group)
 			continue;
 		if (ifindex) {
@@ -1888,7 +1902,7 @@ int ip_mc_leave_group(struct sock *sk, struct ip_mreqn *imr)
 
 		(void) ip_mc_leave_src(sk, iml, in_dev);
 
-		rcu_assign_pointer(*imlp, iml->next);
+		*imlp = iml->next_rcu;
 
 		if (in_dev)
 			ip_mc_dec_group(in_dev, group);
@@ -1934,7 +1948,7 @@ int ip_mc_source(int add, int omode, struct sock *sk, struct
 	}
 	err = -EADDRNOTAVAIL;
 
-	for (pmc=inet->mc_list; pmc; pmc=pmc->next) {
+	for_each_pmc_rtnl(inet, pmc) {
 		if ((pmc->multi.imr_multiaddr.s_addr ==
 		     imr.imr_multiaddr.s_addr) &&
 		    (pmc->multi.imr_ifindex == imr.imr_ifindex))
@@ -1958,7 +1972,7 @@ int ip_mc_source(int add, int omode, struct sock *sk, struct
 		pmc->sfmode = omode;
 	}
 
-	psl = pmc->sflist;
+	psl = rtnl_dereference(pmc->sflist);
 	if (!add) {
 		if (!psl)
 			goto done;	/* err = -EADDRNOTAVAIL */
@@ -2077,7 +2091,7 @@ int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf, int ifindex)
 		goto done;
 	}
 
-	for (pmc=inet->mc_list; pmc; pmc=pmc->next) {
+	for_each_pmc_rtnl(inet, pmc) {
 		if (pmc->multi.imr_multiaddr.s_addr == msf->imsf_multiaddr &&
 		    pmc->multi.imr_ifindex == imr.imr_ifindex)
 			break;
@@ -2107,7 +2121,7 @@ int ip_mc_msfilter(struct sock *sk, struct ip_msfilter *msf, int ifindex)
 		(void) ip_mc_add_src(in_dev, &msf->imsf_multiaddr,
 				     msf->imsf_fmode, 0, NULL, 0);
 	}
-	psl = pmc->sflist;
+	psl = rtnl_dereference(pmc->sflist);
 	if (psl) {
 		(void) ip_mc_del_src(in_dev, &msf->imsf_multiaddr, pmc->sfmode,
 			psl->sl_count, psl->sl_addr, 0);
@@ -2155,7 +2169,7 @@ int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
 	}
 	err = -EADDRNOTAVAIL;
 
-	for (pmc=inet->mc_list; pmc; pmc=pmc->next) {
+	for_each_pmc_rtnl(inet, pmc) {
 		if (pmc->multi.imr_multiaddr.s_addr == msf->imsf_multiaddr &&
 		    pmc->multi.imr_ifindex == imr.imr_ifindex)
 			break;
@@ -2163,7 +2177,7 @@ int ip_mc_msfget(struct sock *sk, struct ip_msfilter *msf,
 	if (!pmc)		/* must have a prior join */
 		goto done;
 	msf->imsf_fmode = pmc->sfmode;
-	psl = pmc->sflist;
+	psl = rtnl_dereference(pmc->sflist);
 	rtnl_unlock();
 	if (!psl) {
 		len = 0;
@@ -2208,7 +2222,7 @@ int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
 
 	err = -EADDRNOTAVAIL;
 
-	for (pmc=inet->mc_list; pmc; pmc=pmc->next) {
+	for_each_pmc_rtnl(inet, pmc) {
 		if (pmc->multi.imr_multiaddr.s_addr == addr &&
 		    pmc->multi.imr_ifindex == gsf->gf_interface)
 			break;
@@ -2216,7 +2230,7 @@ int ip_mc_gsfget(struct sock *sk, struct group_filter *gsf,
 	if (!pmc)		/* must have a prior join */
 		goto done;
 	gsf->gf_fmode = pmc->sfmode;
-	psl = pmc->sflist;
+	psl = rtnl_dereference(pmc->sflist);
 	rtnl_unlock();
 	count = psl ? psl->sl_count : 0;
 	copycount = count < gsf->gf_numsrc ? count : gsf->gf_numsrc;
@@ -2257,7 +2271,7 @@ int ip_mc_sf_allow(struct sock *sk, __be32 loc_addr, __be32 rmt_addr, int dif)
 		goto out;
 
 	rcu_read_lock();
-	for (pmc=rcu_dereference(inet->mc_list); pmc; pmc=rcu_dereference(pmc->next)) {
+	for_each_pmc_rcu(inet, pmc) {
 		if (pmc->multi.imr_multiaddr.s_addr == loc_addr &&
 		    pmc->multi.imr_ifindex == dif)
 			break;
@@ -2265,7 +2279,7 @@ int ip_mc_sf_allow(struct sock *sk, __be32 loc_addr, __be32 rmt_addr, int dif)
 	ret = inet->mc_all;
 	if (!pmc)
 		goto unlock;
-	psl = pmc->sflist;
+	psl = rcu_dereference(pmc->sflist);
 	ret = (pmc->sfmode == MCAST_EXCLUDE);
 	if (!psl)
 		goto unlock;
@@ -2300,16 +2314,14 @@ void ip_mc_drop_socket(struct sock *sk)
 		return;
 
 	rtnl_lock();
-	while ((iml = inet->mc_list) != NULL) {
+	while ((iml = rtnl_dereference(inet->mc_list)) != NULL) {
 		struct in_device *in_dev;
-		rcu_assign_pointer(inet->mc_list, iml->next);
 
+		inet->mc_list = iml->next_rcu;
 		in_dev = inetdev_by_index(net, iml->multi.imr_ifindex);
 		(void) ip_mc_leave_src(sk, iml, in_dev);
-		if (in_dev != NULL) {
+		if (in_dev != NULL)
 			ip_mc_dec_group(in_dev, iml->multi.imr_multiaddr.s_addr);
-			in_dev_put(in_dev);
-		}
 		/* decrease mem now to avoid the memleak warning */
 		atomic_sub(sizeof(*iml), &sk->sk_omem_alloc);
 		call_rcu(&iml->rcu, ip_mc_socklist_reclaim);
@@ -2323,8 +2335,8 @@ int ip_check_mc(struct in_device *in_dev, __be32 mc_addr, __be32 src_addr, u16 p
 	struct ip_sf_list *psf;
 	int rv = 0;
 
-	read_lock(&in_dev->mc_list_lock);
-	for (im=in_dev->mc_list; im; im=im->next) {
+	rcu_read_lock();
+	for_each_pmc_rcu(in_dev, im) {
 		if (im->multiaddr == mc_addr)
 			break;
 	}
@@ -2345,7 +2357,7 @@ int ip_check_mc(struct in_device *in_dev, __be32 mc_addr, __be32 src_addr, u16 p
 		} else
 			rv = 1; /* unspecified source; tentatively allow */
 	}
-	read_unlock(&in_dev->mc_list_lock);
+	rcu_read_unlock();
 	return rv;
 }
 
@@ -2371,13 +2383,11 @@ static inline struct ip_mc_list *igmp_mc_get_first(struct seq_file *seq)
 		in_dev = __in_dev_get_rcu(state->dev);
 		if (!in_dev)
 			continue;
-		read_lock(&in_dev->mc_list_lock);
-		im = in_dev->mc_list;
+		im = rcu_dereference(in_dev->mc_list);
 		if (im) {
 			state->in_dev = in_dev;
 			break;
 		}
-		read_unlock(&in_dev->mc_list_lock);
 	}
 	return im;
 }
@@ -2385,11 +2395,9 @@ static inline struct ip_mc_list *igmp_mc_get_first(struct seq_file *seq)
 static struct ip_mc_list *igmp_mc_get_next(struct seq_file *seq, struct ip_mc_list *im)
 {
 	struct igmp_mc_iter_state *state = igmp_mc_seq_private(seq);
-	im = im->next;
-	while (!im) {
-		if (likely(state->in_dev != NULL))
-			read_unlock(&state->in_dev->mc_list_lock);
 
+	im = rcu_dereference(im->next_rcu);
+	while (!im) {
 		state->dev = next_net_device_rcu(state->dev);
 		if (!state->dev) {
 			state->in_dev = NULL;
@@ -2398,8 +2406,7 @@ static struct ip_mc_list *igmp_mc_get_next(struct seq_file *seq, struct ip_mc_li
 		state->in_dev = __in_dev_get_rcu(state->dev);
 		if (!state->in_dev)
 			continue;
-		read_lock(&state->in_dev->mc_list_lock);
-		im = state->in_dev->mc_list;
+		im = rcu_dereference(state->in_dev->mc_list);
 	}
 	return im;
 }
@@ -2435,10 +2442,8 @@ static void igmp_mc_seq_stop(struct seq_file *seq, void *v)
 	__releases(rcu)
 {
 	struct igmp_mc_iter_state *state = igmp_mc_seq_private(seq);
-	if (likely(state->in_dev != NULL)) {
-		read_unlock(&state->in_dev->mc_list_lock);
-		state->in_dev = NULL;
-	}
+
+	state->in_dev = NULL;
 	state->dev = NULL;
 	rcu_read_unlock();
 }
@@ -2460,7 +2465,7 @@ static int igmp_mc_seq_show(struct seq_file *seq, void *v)
 		querier = "NONE";
 #endif
 
-		if (state->in_dev->mc_list == im) {
+		if (rcu_dereference(state->in_dev->mc_list) == im) {
 			seq_printf(seq, "%d\t%-10s: %5d %7s\n",
 				   state->dev->ifindex, state->dev->name, state->in_dev->mc_count, querier);
 		}
@@ -2519,8 +2524,7 @@ static inline struct ip_sf_list *igmp_mcf_get_first(struct seq_file *seq)
 		idev = __in_dev_get_rcu(state->dev);
 		if (unlikely(idev == NULL))
 			continue;
-		read_lock(&idev->mc_list_lock);
-		im = idev->mc_list;
+		im = rcu_dereference(idev->mc_list);
 		if (likely(im != NULL)) {
 			spin_lock_bh(&im->lock);
 			psf = im->sources;
@@ -2531,7 +2535,6 @@ static inline struct ip_sf_list *igmp_mcf_get_first(struct seq_file *seq)
 			}
 			spin_unlock_bh(&im->lock);
 		}
-		read_unlock(&idev->mc_list_lock);
 	}
 	return psf;
 }
@@ -2545,9 +2548,6 @@ static struct ip_sf_list *igmp_mcf_get_next(struct seq_file *seq, struct ip_sf_l
 		spin_unlock_bh(&state->im->lock);
 		state->im = state->im->next;
 		while (!state->im) {
-			if (likely(state->idev != NULL))
-				read_unlock(&state->idev->mc_list_lock);
-
 			state->dev = next_net_device_rcu(state->dev);
 			if (!state->dev) {
 				state->idev = NULL;
@@ -2556,8 +2556,7 @@ static struct ip_sf_list *igmp_mcf_get_next(struct seq_file *seq, struct ip_sf_l
 			state->idev = __in_dev_get_rcu(state->dev);
 			if (!state->idev)
 				continue;
-			read_lock(&state->idev->mc_list_lock);
-			state->im = state->idev->mc_list;
+			state->im = rcu_dereference(state->idev->mc_list);
 		}
 		if (!state->im)
 			break;
@@ -2603,10 +2602,7 @@ static void igmp_mcf_seq_stop(struct seq_file *seq, void *v)
 		spin_unlock_bh(&state->im->lock);
 		state->im = NULL;
 	}
-	if (likely(state->idev != NULL)) {
-		read_unlock(&state->idev->mc_list_lock);
-		state->idev = NULL;
-	}
+	state->idev = NULL;
 	state->dev = NULL;
 	rcu_read_unlock();
 }
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 7174370b119..25e318153f1 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -55,7 +55,6 @@ EXPORT_SYMBOL(inet_get_local_port_range);
 int inet_csk_bind_conflict(const struct sock *sk,
 			   const struct inet_bind_bucket *tb)
 {
-	const __be32 sk_rcv_saddr = inet_rcv_saddr(sk);
 	struct sock *sk2;
 	struct hlist_node *node;
 	int reuse = sk->sk_reuse;
@@ -75,9 +74,9 @@ int inet_csk_bind_conflict(const struct sock *sk,
 		     sk->sk_bound_dev_if == sk2->sk_bound_dev_if)) {
 			if (!reuse || !sk2->sk_reuse ||
 			    sk2->sk_state == TCP_LISTEN) {
-				const __be32 sk2_rcv_saddr = inet_rcv_saddr(sk2);
-				if (!sk2_rcv_saddr || !sk_rcv_saddr ||
-				    sk2_rcv_saddr == sk_rcv_saddr)
+				const __be32 sk2_rcv_saddr = sk_rcv_saddr(sk2);
+				if (!sk2_rcv_saddr || !sk_rcv_saddr(sk) ||
+				    sk2_rcv_saddr == sk_rcv_saddr(sk))
 					break;
 			}
 		}
@@ -358,17 +357,14 @@ struct dst_entry *inet_csk_route_req(struct sock *sk,
 	struct ip_options *opt = inet_rsk(req)->opt;
 	struct flowi fl = { .oif = sk->sk_bound_dev_if,
 			    .mark = sk->sk_mark,
-			    .nl_u = { .ip4_u =
-				      { .daddr = ((opt && opt->srr) ?
-						  opt->faddr :
-						  ireq->rmt_addr),
-					.saddr = ireq->loc_addr,
-					.tos = RT_CONN_FLAGS(sk) } },
+			    .fl4_dst = ((opt && opt->srr) ?
+					  opt->faddr : ireq->rmt_addr),
+			    .fl4_src = ireq->loc_addr,
+			    .fl4_tos = RT_CONN_FLAGS(sk),
 			    .proto = sk->sk_protocol,
 			    .flags = inet_sk_flowi_flags(sk),
-			    .uli_u = { .ports =
-				       { .sport = inet_sk(sk)->inet_sport,
-					 .dport = ireq->rmt_port } } };
+			    .fl_ip_sport = inet_sk(sk)->inet_sport,
+			    .fl_ip_dport = ireq->rmt_port };
 	struct net *net = sock_net(sk);
 
 	security_req_classify_flow(req, &fl);
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 1b344f30b46..3c0369a3a66 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -133,8 +133,7 @@ int __inet_inherit_port(struct sock *sk, struct sock *child)
 			}
 		}
 	}
-	sk_add_bind_node(child, &tb->owners);
-	inet_csk(child)->icsk_bind_hash = tb;
+	inet_bind_hash(child, tb, port);
 	spin_unlock(&head->lock);
 
 	return 0;
diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c
index 9e94d7cf4f8..d9bc85751c7 100644
--- a/net/ipv4/inetpeer.c
+++ b/net/ipv4/inetpeer.c
@@ -63,7 +63,7 @@
  *		refcnt: atomically against modifications on other CPU;
  *		   usually under some other lock to prevent node disappearing
  *		dtime: unused node list lock
- *		v4daddr: unchangeable
+ *		daddr: unchangeable
  *		ip_id_count: atomic value (no lock needed)
  */
 
@@ -79,15 +79,24 @@ static const struct inet_peer peer_fake_node = {
 	.avl_height	= 0
 };
 
-static struct {
+struct inet_peer_base {
 	struct inet_peer __rcu *root;
 	spinlock_t	lock;
 	int		total;
-} peers = {
+};
+
+static struct inet_peer_base v4_peers = {
+	.root		= peer_avl_empty_rcu,
+	.lock		= __SPIN_LOCK_UNLOCKED(v4_peers.lock),
+	.total		= 0,
+};
+
+static struct inet_peer_base v6_peers = {
 	.root		= peer_avl_empty_rcu,
-	.lock		= __SPIN_LOCK_UNLOCKED(peers.lock),
+	.lock		= __SPIN_LOCK_UNLOCKED(v6_peers.lock),
 	.total		= 0,
 };
+
 #define PEER_MAXDEPTH 40 /* sufficient for about 2^27 nodes */
 
 /* Exported for sysctl_net_ipv4.  */
@@ -152,28 +161,45 @@ static void unlink_from_unused(struct inet_peer *p)
 	}
 }
 
+static int addr_compare(const struct inetpeer_addr *a,
+			const struct inetpeer_addr *b)
+{
+	int i, n = (a->family == AF_INET ? 1 : 4);
+
+	for (i = 0; i < n; i++) {
+		if (a->a6[i] == b->a6[i])
+			continue;
+		if (a->a6[i] < b->a6[i])
+			return -1;
+		return 1;
+	}
+
+	return 0;
+}
+
 /*
  * Called with local BH disabled and the pool lock held.
  */
-#define lookup(_daddr, _stack) 					\
+#define lookup(_daddr, _stack, _base)				\
 ({								\
 	struct inet_peer *u;					\
 	struct inet_peer __rcu **v;				\
 								\
 	stackptr = _stack;					\
-	*stackptr++ = &peers.root;				\
-	for (u = rcu_dereference_protected(peers.root,		\
-			lockdep_is_held(&peers.lock));		\
+	*stackptr++ = &_base->root;				\
+	for (u = rcu_dereference_protected(_base->root,		\
+			lockdep_is_held(&_base->lock));		\
 	     u != peer_avl_empty; ) {				\
-		if (_daddr == u->v4daddr)			\
+		int cmp = addr_compare(_daddr, &u->daddr);	\
+		if (cmp == 0)					\
 			break;					\
-		if ((__force __u32)_daddr < (__force __u32)u->v4daddr)	\
+		if (cmp == -1)					\
 			v = &u->avl_left;			\
 		else						\
 			v = &u->avl_right;			\
 		*stackptr++ = v;				\
 		u = rcu_dereference_protected(*v,		\
-			lockdep_is_held(&peers.lock));		\
+			lockdep_is_held(&_base->lock));		\
 	}							\
 	u;							\
 })
@@ -185,13 +211,15 @@ static void unlink_from_unused(struct inet_peer *p)
  * But every pointer we follow is guaranteed to be valid thanks to RCU.
  * We exit from this function if number of links exceeds PEER_MAXDEPTH
  */
-static struct inet_peer *lookup_rcu_bh(__be32 daddr)
+static struct inet_peer *lookup_rcu_bh(const struct inetpeer_addr *daddr,
+				       struct inet_peer_base *base)
 {
-	struct inet_peer *u = rcu_dereference_bh(peers.root);
+	struct inet_peer *u = rcu_dereference_bh(base->root);
 	int count = 0;
 
 	while (u != peer_avl_empty) {
-		if (daddr == u->v4daddr) {
+		int cmp = addr_compare(daddr, &u->daddr);
+		if (cmp == 0) {
 			/* Before taking a reference, check if this entry was
 			 * deleted, unlink_from_pool() sets refcnt=-1 to make
 			 * distinction between an unused entry (refcnt=0) and
@@ -201,7 +229,7 @@ static struct inet_peer *lookup_rcu_bh(__be32 daddr)
 				u = NULL;
 			return u;
 		}
-		if ((__force __u32)daddr < (__force __u32)u->v4daddr)
+		if (cmp == -1)
 			u = rcu_dereference_bh(u->avl_left);
 		else
 			u = rcu_dereference_bh(u->avl_right);
@@ -212,19 +240,19 @@ static struct inet_peer *lookup_rcu_bh(__be32 daddr)
 }
 
 /* Called with local BH disabled and the pool lock held. */
-#define lookup_rightempty(start)				\
+#define lookup_rightempty(start, base)				\
 ({								\
 	struct inet_peer *u;					\
 	struct inet_peer __rcu **v;				\
 	*stackptr++ = &start->avl_left;				\
 	v = &start->avl_left;					\
 	for (u = rcu_dereference_protected(*v,			\
-			lockdep_is_held(&peers.lock));		\
+			lockdep_is_held(&base->lock));		\
 	     u->avl_right != peer_avl_empty_rcu; ) {		\
 		v = &u->avl_right;				\
 		*stackptr++ = v;				\
 		u = rcu_dereference_protected(*v,		\
-			lockdep_is_held(&peers.lock));		\
+			lockdep_is_held(&base->lock));		\
 	}							\
 	u;							\
 })
@@ -234,7 +262,8 @@ static struct inet_peer *lookup_rcu_bh(__be32 daddr)
  * Look into mm/map_avl.c for more detail description of the ideas.
  */
 static void peer_avl_rebalance(struct inet_peer __rcu **stack[],
-		struct inet_peer __rcu ***stackend)
+			       struct inet_peer __rcu ***stackend,
+			       struct inet_peer_base *base)
 {
 	struct inet_peer __rcu **nodep;
 	struct inet_peer *node, *l, *r;
@@ -243,20 +272,20 @@ static void peer_avl_rebalance(struct inet_peer __rcu **stack[],
 	while (stackend > stack) {
 		nodep = *--stackend;
 		node = rcu_dereference_protected(*nodep,
-				lockdep_is_held(&peers.lock));
+				lockdep_is_held(&base->lock));
 		l = rcu_dereference_protected(node->avl_left,
-				lockdep_is_held(&peers.lock));
+				lockdep_is_held(&base->lock));
 		r = rcu_dereference_protected(node->avl_right,
-				lockdep_is_held(&peers.lock));
+				lockdep_is_held(&base->lock));
 		lh = node_height(l);
 		rh = node_height(r);
 		if (lh > rh + 1) { /* l: RH+2 */
 			struct inet_peer *ll, *lr, *lrl, *lrr;
 			int lrh;
 			ll = rcu_dereference_protected(l->avl_left,
-				lockdep_is_held(&peers.lock));
+				lockdep_is_held(&base->lock));
 			lr = rcu_dereference_protected(l->avl_right,
-				lockdep_is_held(&peers.lock));
+				lockdep_is_held(&base->lock));
 			lrh = node_height(lr);
 			if (lrh <= node_height(ll)) {	/* ll: RH+1 */
 				RCU_INIT_POINTER(node->avl_left, lr);	/* lr: RH or RH+1 */
@@ -268,9 +297,9 @@ static void peer_avl_rebalance(struct inet_peer __rcu **stack[],
 				RCU_INIT_POINTER(*nodep, l);
 			} else { /* ll: RH, lr: RH+1 */
 				lrl = rcu_dereference_protected(lr->avl_left,
-					lockdep_is_held(&peers.lock));	/* lrl: RH or RH-1 */
+					lockdep_is_held(&base->lock));	/* lrl: RH or RH-1 */
 				lrr = rcu_dereference_protected(lr->avl_right,
-					lockdep_is_held(&peers.lock));	/* lrr: RH or RH-1 */
+					lockdep_is_held(&base->lock));	/* lrr: RH or RH-1 */
 				RCU_INIT_POINTER(node->avl_left, lrr);	/* lrr: RH or RH-1 */
 				RCU_INIT_POINTER(node->avl_right, r);	/* r: RH */
 				node->avl_height = rh + 1; /* node: RH+1 */
@@ -286,9 +315,9 @@ static void peer_avl_rebalance(struct inet_peer __rcu **stack[],
 			struct inet_peer *rr, *rl, *rlr, *rll;
 			int rlh;
 			rr = rcu_dereference_protected(r->avl_right,
-				lockdep_is_held(&peers.lock));
+				lockdep_is_held(&base->lock));
 			rl = rcu_dereference_protected(r->avl_left,
-				lockdep_is_held(&peers.lock));
+				lockdep_is_held(&base->lock));
 			rlh = node_height(rl);
 			if (rlh <= node_height(rr)) {	/* rr: LH+1 */
 				RCU_INIT_POINTER(node->avl_right, rl);	/* rl: LH or LH+1 */
@@ -300,9 +329,9 @@ static void peer_avl_rebalance(struct inet_peer __rcu **stack[],
 				RCU_INIT_POINTER(*nodep, r);
 			} else { /* rr: RH, rl: RH+1 */
 				rlr = rcu_dereference_protected(rl->avl_right,
-					lockdep_is_held(&peers.lock));	/* rlr: LH or LH-1 */
+					lockdep_is_held(&base->lock));	/* rlr: LH or LH-1 */
 				rll = rcu_dereference_protected(rl->avl_left,
-					lockdep_is_held(&peers.lock));	/* rll: LH or LH-1 */
+					lockdep_is_held(&base->lock));	/* rll: LH or LH-1 */
 				RCU_INIT_POINTER(node->avl_right, rll);	/* rll: LH or LH-1 */
 				RCU_INIT_POINTER(node->avl_left, l);	/* l: LH */
 				node->avl_height = lh + 1; /* node: LH+1 */
@@ -321,14 +350,14 @@ static void peer_avl_rebalance(struct inet_peer __rcu **stack[],
 }
 
 /* Called with local BH disabled and the pool lock held. */
-#define link_to_pool(n)						\
+#define link_to_pool(n, base)					\
 do {								\
 	n->avl_height = 1;					\
 	n->avl_left = peer_avl_empty_rcu;			\
 	n->avl_right = peer_avl_empty_rcu;			\
 	/* lockless readers can catch us now */			\
 	rcu_assign_pointer(**--stackptr, n);			\
-	peer_avl_rebalance(stack, stackptr);			\
+	peer_avl_rebalance(stack, stackptr, base);		\
 } while (0)
 
 static void inetpeer_free_rcu(struct rcu_head *head)
@@ -337,13 +366,13 @@ static void inetpeer_free_rcu(struct rcu_head *head)
 }
 
 /* May be called with local BH enabled. */
-static void unlink_from_pool(struct inet_peer *p)
+static void unlink_from_pool(struct inet_peer *p, struct inet_peer_base *base)
 {
 	int do_free;
 
 	do_free = 0;
 
-	spin_lock_bh(&peers.lock);
+	spin_lock_bh(&base->lock);
 	/* Check the reference counter.  It was artificially incremented by 1
 	 * in cleanup() function to prevent sudden disappearing.  If we can
 	 * atomically (because of lockless readers) take this last reference,
@@ -353,7 +382,7 @@ static void unlink_from_pool(struct inet_peer *p)
 	if (atomic_cmpxchg(&p->refcnt, 1, -1) == 1) {
 		struct inet_peer __rcu **stack[PEER_MAXDEPTH];
 		struct inet_peer __rcu ***stackptr, ***delp;
-		if (lookup(p->v4daddr, stack) != p)
+		if (lookup(&p->daddr, stack, base) != p)
 			BUG();
 		delp = stackptr - 1; /* *delp[0] == p */
 		if (p->avl_left == peer_avl_empty_rcu) {
@@ -362,11 +391,11 @@ static void unlink_from_pool(struct inet_peer *p)
 		} else {
 			/* look for a node to insert instead of p */
 			struct inet_peer *t;
-			t = lookup_rightempty(p);
+			t = lookup_rightempty(p, base);
 			BUG_ON(rcu_dereference_protected(*stackptr[-1],
-					lockdep_is_held(&peers.lock)) != t);
+					lockdep_is_held(&base->lock)) != t);
 			**--stackptr = t->avl_left;
-			/* t is removed, t->v4daddr > x->v4daddr for any
+			/* t is removed, t->daddr > x->daddr for any
 			 * x in p->avl_left subtree.
 			 * Put t in the old place of p. */
 			RCU_INIT_POINTER(*delp[0], t);
@@ -376,11 +405,11 @@ static void unlink_from_pool(struct inet_peer *p)
 			BUG_ON(delp[1] != &p->avl_left);
 			delp[1] = &t->avl_left; /* was &p->avl_left */
 		}
-		peer_avl_rebalance(stack, stackptr);
-		peers.total--;
+		peer_avl_rebalance(stack, stackptr, base);
+		base->total--;
 		do_free = 1;
 	}
-	spin_unlock_bh(&peers.lock);
+	spin_unlock_bh(&base->lock);
 
 	if (do_free)
 		call_rcu_bh(&p->rcu, inetpeer_free_rcu);
@@ -395,6 +424,16 @@ static void unlink_from_pool(struct inet_peer *p)
 		inet_putpeer(p);
 }
 
+static struct inet_peer_base *family_to_base(int family)
+{
+	return (family == AF_INET ? &v4_peers : &v6_peers);
+}
+
+static struct inet_peer_base *peer_to_base(struct inet_peer *p)
+{
+	return family_to_base(p->daddr.family);
+}
+
 /* May be called with local BH enabled. */
 static int cleanup_once(unsigned long ttl)
 {
@@ -428,21 +467,22 @@ static int cleanup_once(unsigned long ttl)
 		 * happen because of entry limits in route cache. */
 		return -1;
 
-	unlink_from_pool(p);
+	unlink_from_pool(p, peer_to_base(p));
 	return 0;
 }
 
 /* Called with or without local BH being disabled. */
-struct inet_peer *inet_getpeer(__be32 daddr, int create)
+struct inet_peer *inet_getpeer(struct inetpeer_addr *daddr, int create)
 {
-	struct inet_peer *p;
 	struct inet_peer __rcu **stack[PEER_MAXDEPTH], ***stackptr;
+	struct inet_peer_base *base = family_to_base(AF_INET);
+	struct inet_peer *p;
 
 	/* Look up for the address quickly, lockless.
 	 * Because of a concurrent writer, we might not find an existing entry.
 	 */
 	rcu_read_lock_bh();
-	p = lookup_rcu_bh(daddr);
+	p = lookup_rcu_bh(daddr, base);
 	rcu_read_unlock_bh();
 
 	if (p) {
@@ -456,50 +496,57 @@ struct inet_peer *inet_getpeer(__be32 daddr, int create)
 	/* retry an exact lookup, taking the lock before.
 	 * At least, nodes should be hot in our cache.
 	 */
-	spin_lock_bh(&peers.lock);
-	p = lookup(daddr, stack);
+	spin_lock_bh(&base->lock);
+	p = lookup(daddr, stack, base);
 	if (p != peer_avl_empty) {
 		atomic_inc(&p->refcnt);
-		spin_unlock_bh(&peers.lock);
+		spin_unlock_bh(&base->lock);
 		/* Remove the entry from unused list if it was there. */
 		unlink_from_unused(p);
 		return p;
 	}
 	p = create ? kmem_cache_alloc(peer_cachep, GFP_ATOMIC) : NULL;
 	if (p) {
-		p->v4daddr = daddr;
+		p->daddr = *daddr;
 		atomic_set(&p->refcnt, 1);
 		atomic_set(&p->rid, 0);
-		atomic_set(&p->ip_id_count, secure_ip_id(daddr));
+		atomic_set(&p->ip_id_count, secure_ip_id(daddr->a4));
 		p->tcp_ts_stamp = 0;
 		INIT_LIST_HEAD(&p->unused);
 
 
 		/* Link the node. */
-		link_to_pool(p);
-		peers.total++;
+		link_to_pool(p, base);
+		base->total++;
 	}
-	spin_unlock_bh(&peers.lock);
+	spin_unlock_bh(&base->lock);
 
-	if (peers.total >= inet_peer_threshold)
+	if (base->total >= inet_peer_threshold)
 		/* Remove one less-recently-used entry. */
 		cleanup_once(0);
 
 	return p;
 }
 
+static int compute_total(void)
+{
+	return v4_peers.total + v6_peers.total;
+}
+EXPORT_SYMBOL_GPL(inet_getpeer);
+
 /* Called with local BH disabled. */
 static void peer_check_expire(unsigned long dummy)
 {
 	unsigned long now = jiffies;
-	int ttl;
+	int ttl, total;
 
-	if (peers.total >= inet_peer_threshold)
+	total = compute_total();
+	if (total >= inet_peer_threshold)
 		ttl = inet_peer_minttl;
 	else
 		ttl = inet_peer_maxttl
 				- (inet_peer_maxttl - inet_peer_minttl) / HZ *
-					peers.total / inet_peer_threshold * HZ;
+					total / inet_peer_threshold * HZ;
 	while (!cleanup_once(ttl)) {
 		if (jiffies != now)
 			break;
@@ -508,13 +555,14 @@ static void peer_check_expire(unsigned long dummy)
 	/* Trigger the timer after inet_peer_gc_mintime .. inet_peer_gc_maxtime
 	 * interval depending on the total number of entries (more entries,
 	 * less interval). */
-	if (peers.total >= inet_peer_threshold)
+	total = compute_total();
+	if (total >= inet_peer_threshold)
 		peer_periodic_timer.expires = jiffies + inet_peer_gc_mintime;
 	else
 		peer_periodic_timer.expires = jiffies
 			+ inet_peer_gc_maxtime
 			- (inet_peer_gc_maxtime - inet_peer_gc_mintime) / HZ *
-				peers.total / inet_peer_threshold * HZ;
+				total / inet_peer_threshold * HZ;
 	add_timer(&peer_periodic_timer);
 }
 
@@ -530,3 +578,4 @@ void inet_putpeer(struct inet_peer *p)
 
 	local_bh_enable();
 }
+EXPORT_SYMBOL_GPL(inet_putpeer);
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 168440834ad..a1151b8adf3 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -45,6 +45,7 @@
 #include <linux/udp.h>
 #include <linux/inet.h>
 #include <linux/netfilter_ipv4.h>
+#include <net/inet_ecn.h>
 
 /* NOTE. Logic of IP defragmentation is parallel to corresponding IPv6
  * code now. If you change something here, _PLEASE_ update ipv6/reassembly.c
@@ -70,11 +71,28 @@ struct ipq {
 	__be32		daddr;
 	__be16		id;
 	u8		protocol;
+	u8		ecn; /* RFC3168 support */
 	int             iif;
 	unsigned int    rid;
 	struct inet_peer *peer;
 };
 
+#define IPFRAG_ECN_CLEAR  0x01 /* one frag had INET_ECN_NOT_ECT */
+#define IPFRAG_ECN_SET_CE 0x04 /* one frag had INET_ECN_CE */
+
+static inline u8 ip4_frag_ecn(u8 tos)
+{
+	tos = (tos & INET_ECN_MASK) + 1;
+	/*
+	 * After the last operation we have (in binary):
+	 * INET_ECN_NOT_ECT => 001
+	 * INET_ECN_ECT_1   => 010
+	 * INET_ECN_ECT_0   => 011
+	 * INET_ECN_CE      => 100
+	 */
+	return (tos & 2) ? 0 : tos;
+}
+
 static struct inet_frags ip4_frags;
 
 int ip_frag_nqueues(struct net *net)
@@ -137,11 +155,12 @@ static void ip4_frag_init(struct inet_frag_queue *q, void *a)
 
 	qp->protocol = arg->iph->protocol;
 	qp->id = arg->iph->id;
+	qp->ecn = ip4_frag_ecn(arg->iph->tos);
 	qp->saddr = arg->iph->saddr;
 	qp->daddr = arg->iph->daddr;
 	qp->user = arg->user;
 	qp->peer = sysctl_ipfrag_max_dist ?
-		inet_getpeer(arg->iph->saddr, 1) : NULL;
+		inet_getpeer_v4(arg->iph->saddr, 1) : NULL;
 }
 
 static __inline__ void ip4_frag_free(struct inet_frag_queue *q)
@@ -316,6 +335,7 @@ static int ip_frag_reinit(struct ipq *qp)
 	qp->q.fragments = NULL;
 	qp->q.fragments_tail = NULL;
 	qp->iif = 0;
+	qp->ecn = 0;
 
 	return 0;
 }
@@ -328,6 +348,7 @@ static int ip_frag_queue(struct ipq *qp, struct sk_buff *skb)
 	int flags, offset;
 	int ihl, end;
 	int err = -ENOENT;
+	u8 ecn;
 
 	if (qp->q.last_in & INET_FRAG_COMPLETE)
 		goto err;
@@ -339,6 +360,7 @@ static int ip_frag_queue(struct ipq *qp, struct sk_buff *skb)
 		goto err;
 	}
 
+	ecn = ip4_frag_ecn(ip_hdr(skb)->tos);
 	offset = ntohs(ip_hdr(skb)->frag_off);
 	flags = offset & ~IP_OFFSET;
 	offset &= IP_OFFSET;
@@ -472,6 +494,7 @@ found:
 	}
 	qp->q.stamp = skb->tstamp;
 	qp->q.meat += skb->len;
+	qp->ecn |= ecn;
 	atomic_add(skb->truesize, &qp->q.net->mem);
 	if (offset == 0)
 		qp->q.last_in |= INET_FRAG_FIRST_IN;
@@ -583,6 +606,17 @@ static int ip_frag_reasm(struct ipq *qp, struct sk_buff *prev,
 	iph = ip_hdr(head);
 	iph->frag_off = 0;
 	iph->tot_len = htons(len);
+	/* RFC3168 5.3 Fragmentation support
+	 * If one fragment had INET_ECN_NOT_ECT,
+	 *	reassembled frame also has INET_ECN_NOT_ECT
+	 * Elif one fragment had INET_ECN_CE
+	 *	reassembled frame also has INET_ECN_CE
+	 */
+	if (qp->ecn & IPFRAG_ECN_CLEAR)
+		iph->tos &= ~INET_ECN_MASK;
+	else if (qp->ecn & IPFRAG_ECN_SET_CE)
+		iph->tos |= INET_ECN_CE;
+
 	IP_INC_STATS_BH(net, IPSTATS_MIB_REASMOKS);
 	qp->q.fragments = NULL;
 	qp->q.fragments_tail = NULL;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index cab2057d543..eb68a0e34e4 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -405,11 +405,11 @@ static struct ip_tunnel *ipgre_tunnel_locate(struct net *net,
 	if (parms->name[0])
 		strlcpy(name, parms->name, IFNAMSIZ);
 	else
-		sprintf(name, "gre%%d");
+		strcpy(name, "gre%d");
 
 	dev = alloc_netdev(sizeof(*t), name, ipgre_tunnel_setup);
 	if (!dev)
-	  return NULL;
+		return NULL;
 
 	dev_net_set(dev, net);
 
@@ -772,16 +772,11 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev
 	{
 		struct flowi fl = {
 			.oif = tunnel->parms.link,
-			.nl_u = {
-				.ip4_u = {
-					.daddr = dst,
-					.saddr = tiph->saddr,
-					.tos = RT_TOS(tos)
-				}
-			},
-			.proto = IPPROTO_GRE
-		}
-;
+			.fl4_dst = dst,
+			.fl4_src = tiph->saddr,
+			.fl4_tos = RT_TOS(tos),
+			.fl_gre_key = tunnel->parms.o_key
+		};
 		if (ip_route_output_key(dev_net(dev), &rt, &fl)) {
 			dev->stats.tx_carrier_errors++;
 			goto tx_error;
@@ -823,7 +818,7 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev
 			     !ipv4_is_multicast(tunnel->parms.iph.daddr)) ||
 			    rt6->rt6i_dst.plen == 128) {
 				rt6->rt6i_flags |= RTF_MODIFIED;
-				skb_dst(skb)->metrics[RTAX_MTU-1] = mtu;
+				dst_metric_set(skb_dst(skb), RTAX_MTU, mtu);
 			}
 		}
 
@@ -895,7 +890,7 @@ static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev
 			iph->ttl = ((struct ipv6hdr *)old_iph)->hop_limit;
 #endif
 		else
-			iph->ttl = dst_metric(&rt->dst, RTAX_HOPLIMIT);
+			iph->ttl = ip4_dst_hoplimit(&rt->dst);
 	}
 
 	((__be16 *)(iph + 1))[0] = tunnel->parms.o_flags;
@@ -951,14 +946,11 @@ static int ipgre_tunnel_bind_dev(struct net_device *dev)
 	if (iph->daddr) {
 		struct flowi fl = {
 			.oif = tunnel->parms.link,
-			.nl_u = {
-				.ip4_u = {
-					.daddr = iph->daddr,
-					.saddr = iph->saddr,
-					.tos = RT_TOS(iph->tos)
-				}
-			},
-			.proto = IPPROTO_GRE
+			.fl4_dst = iph->daddr,
+			.fl4_src = iph->saddr,
+			.fl4_tos = RT_TOS(iph->tos),
+			.proto = IPPROTO_GRE,
+			.fl_gre_key = tunnel->parms.o_key
 		};
 		struct rtable *rt;
 
@@ -1216,14 +1208,11 @@ static int ipgre_open(struct net_device *dev)
 	if (ipv4_is_multicast(t->parms.iph.daddr)) {
 		struct flowi fl = {
 			.oif = t->parms.link,
-			.nl_u = {
-				.ip4_u = {
-					.daddr = t->parms.iph.daddr,
-					.saddr = t->parms.iph.saddr,
-					.tos = RT_TOS(t->parms.iph.tos)
-				}
-			},
-			.proto = IPPROTO_GRE
+			.fl4_dst = t->parms.iph.daddr,
+			.fl4_src = t->parms.iph.saddr,
+			.fl4_tos = RT_TOS(t->parms.iph.tos),
+			.proto = IPPROTO_GRE,
+			.fl_gre_key = t->parms.o_key
 		};
 		struct rtable *rt;
 
@@ -1775,3 +1764,4 @@ module_exit(ipgre_fini);
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_RTNL_LINK("gre");
 MODULE_ALIAS_RTNL_LINK("gretap");
+MODULE_ALIAS("gre0");
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index 439d2a34ee4..04c7b3ba6b3 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -82,6 +82,7 @@
 #include <linux/tcp.h>
 
 int sysctl_ip_default_ttl __read_mostly = IPDEFTTL;
+EXPORT_SYMBOL(sysctl_ip_default_ttl);
 
 /* Generate a checksum for an outgoing IP datagram. */
 __inline__ void ip_send_check(struct iphdr *iph)
@@ -130,7 +131,7 @@ static inline int ip_select_ttl(struct inet_sock *inet, struct dst_entry *dst)
 	int ttl = inet->uc_ttl;
 
 	if (ttl < 0)
-		ttl = dst_metric(dst, RTAX_HOPLIMIT);
+		ttl = ip4_dst_hoplimit(dst);
 	return ttl;
 }
 
@@ -341,15 +342,13 @@ int ip_queue_xmit(struct sk_buff *skb)
 		{
 			struct flowi fl = { .oif = sk->sk_bound_dev_if,
 					    .mark = sk->sk_mark,
-					    .nl_u = { .ip4_u =
-						      { .daddr = daddr,
-							.saddr = inet->inet_saddr,
-							.tos = RT_CONN_FLAGS(sk) } },
+					    .fl4_dst = daddr,
+					    .fl4_src = inet->inet_saddr,
+					    .fl4_tos = RT_CONN_FLAGS(sk),
 					    .proto = sk->sk_protocol,
 					    .flags = inet_sk_flowi_flags(sk),
-					    .uli_u = { .ports =
-						       { .sport = inet->inet_sport,
-							 .dport = inet->inet_dport } } };
+					    .fl_ip_sport = inet->inet_sport,
+					    .fl_ip_dport = inet->inet_dport };
 
 			/* If this fails, retransmit mechanism of transport layer will
 			 * keep trying until route appears or the connection times
@@ -1404,14 +1403,11 @@ void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *ar
 
 	{
 		struct flowi fl = { .oif = arg->bound_dev_if,
-				    .nl_u = { .ip4_u =
-					      { .daddr = daddr,
-						.saddr = rt->rt_spec_dst,
-						.tos = RT_TOS(ip_hdr(skb)->tos) } },
-				    /* Not quite clean, but right. */
-				    .uli_u = { .ports =
-					       { .sport = tcp_hdr(skb)->dest,
-						 .dport = tcp_hdr(skb)->source } },
+				    .fl4_dst = daddr,
+				    .fl4_src = rt->rt_spec_dst,
+				    .fl4_tos = RT_TOS(ip_hdr(skb)->tos),
+				    .fl_ip_sport = tcp_hdr(skb)->dest,
+				    .fl_ip_dport = tcp_hdr(skb)->source,
 				    .proto = sk->sk_protocol,
 				    .flags = ip_reply_arg_flowi_flags(arg) };
 		security_skb_classify_flow(skb, &fl);
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 3a6e1ec5e9a..2b097752426 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -1191,13 +1191,13 @@ static int __init ic_dynamic(void)
 		    (ic_proto_enabled & IC_USE_DHCP) &&
 		    ic_dhcp_msgtype != DHCPACK) {
 			ic_got_reply = 0;
-			printk(",");
+			printk(KERN_CONT ",");
 			continue;
 		}
 #endif /* IPCONFIG_DHCP */
 
 		if (ic_got_reply) {
-			printk(" OK\n");
+			printk(KERN_CONT " OK\n");
 			break;
 		}
 
@@ -1205,7 +1205,7 @@ static int __init ic_dynamic(void)
 			continue;
 
 		if (! --retries) {
-			printk(" timed out!\n");
+			printk(KERN_CONT " timed out!\n");
 			break;
 		}
 
@@ -1215,7 +1215,7 @@ static int __init ic_dynamic(void)
 		if (timeout > CONF_TIMEOUT_MAX)
 			timeout = CONF_TIMEOUT_MAX;
 
-		printk(".");
+		printk(KERN_CONT ".");
 	}
 
 #ifdef IPCONFIG_BOOTP
@@ -1236,7 +1236,7 @@ static int __init ic_dynamic(void)
 		((ic_got_reply & IC_RARP) ? "RARP"
 		 : (ic_proto_enabled & IC_USE_DHCP) ? "DHCP" : "BOOTP"),
 		&ic_servaddr);
-	printk("my address is %pI4\n", &ic_myaddr);
+	printk(KERN_CONT "my address is %pI4\n", &ic_myaddr);
 
 	return 0;
 }
@@ -1468,19 +1468,19 @@ static int __init ip_auto_config(void)
 	/*
 	 * Clue in the operator.
 	 */
-	printk("IP-Config: Complete:");
-	printk("\n     device=%s", ic_dev->name);
-	printk(", addr=%pI4", &ic_myaddr);
-	printk(", mask=%pI4", &ic_netmask);
-	printk(", gw=%pI4", &ic_gateway);
-	printk(",\n     host=%s, domain=%s, nis-domain=%s",
+	printk("IP-Config: Complete:\n");
+	printk("     device=%s", ic_dev->name);
+	printk(KERN_CONT ", addr=%pI4", &ic_myaddr);
+	printk(KERN_CONT ", mask=%pI4", &ic_netmask);
+	printk(KERN_CONT ", gw=%pI4", &ic_gateway);
+	printk(KERN_CONT ",\n     host=%s, domain=%s, nis-domain=%s",
 	       utsname()->nodename, ic_domain, utsname()->domainname);
-	printk(",\n     bootserver=%pI4", &ic_servaddr);
-	printk(", rootserver=%pI4", &root_server_addr);
-	printk(", rootpath=%s", root_server_path);
+	printk(KERN_CONT ",\n     bootserver=%pI4", &ic_servaddr);
+	printk(KERN_CONT ", rootserver=%pI4", &root_server_addr);
+	printk(KERN_CONT ", rootpath=%s", root_server_path);
 	if (ic_dev_mtu)
-		printk(", mtu=%d", ic_dev_mtu);
-	printk("\n");
+		printk(KERN_CONT ", mtu=%d", ic_dev_mtu);
+	printk(KERN_CONT "\n");
 #endif /* !SILENT */
 
 	return 0;
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index cd300aaee78..988f52fba54 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -463,13 +463,9 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 	{
 		struct flowi fl = {
 			.oif = tunnel->parms.link,
-			.nl_u = {
-				.ip4_u = {
-					.daddr = dst,
-					.saddr = tiph->saddr,
-					.tos = RT_TOS(tos)
-				}
-			},
+			.fl4_dst = dst,
+			.fl4_src= tiph->saddr,
+			.fl4_tos = RT_TOS(tos),
 			.proto = IPPROTO_IPIP
 		};
 
@@ -589,13 +585,9 @@ static void ipip_tunnel_bind_dev(struct net_device *dev)
 	if (iph->daddr) {
 		struct flowi fl = {
 			.oif = tunnel->parms.link,
-			.nl_u = {
-				.ip4_u = {
-					.daddr = iph->daddr,
-					.saddr = iph->saddr,
-					.tos = RT_TOS(iph->tos)
-				}
-			},
+			.fl4_dst = iph->daddr,
+			.fl4_src = iph->saddr,
+			.fl4_tos = RT_TOS(iph->tos),
 			.proto = IPPROTO_IPIP
 		};
 		struct rtable *rt;
@@ -921,3 +913,4 @@ static void __exit ipip_fini(void)
 module_init(ipip_init);
 module_exit(ipip_fini);
 MODULE_LICENSE("GPL");
+MODULE_ALIAS("tunl0");
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index ef2b0089e0e..3f3a9afd73e 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -1537,13 +1537,9 @@ static void ipmr_queue_xmit(struct net *net, struct mr_table *mrt,
 	if (vif->flags & VIFF_TUNNEL) {
 		struct flowi fl = {
 			.oif = vif->link,
-			.nl_u = {
-				.ip4_u = {
-					.daddr = vif->remote,
-					.saddr = vif->local,
-					.tos = RT_TOS(iph->tos)
-				}
-			},
+			.fl4_dst = vif->remote,
+			.fl4_src = vif->local,
+			.fl4_tos = RT_TOS(iph->tos),
 			.proto = IPPROTO_IPIP
 		};
 
@@ -1553,12 +1549,8 @@ static void ipmr_queue_xmit(struct net *net, struct mr_table *mrt,
 	} else {
 		struct flowi fl = {
 			.oif = vif->link,
-			.nl_u = {
-				.ip4_u = {
-					.daddr = iph->daddr,
-					.tos = RT_TOS(iph->tos)
-				}
-			},
+			.fl4_dst = iph->daddr,
+			.fl4_tos = RT_TOS(iph->tos),
 			.proto = IPPROTO_IPIP
 		};
 
diff --git a/net/ipv4/netfilter.c b/net/ipv4/netfilter.c
index d88a46c54fd..994a1f29ebb 100644
--- a/net/ipv4/netfilter.c
+++ b/net/ipv4/netfilter.c
@@ -31,10 +31,10 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
 	 * packets with foreign saddr to appear on the NF_INET_LOCAL_OUT hook.
 	 */
 	if (addr_type == RTN_LOCAL) {
-		fl.nl_u.ip4_u.daddr = iph->daddr;
+		fl.fl4_dst = iph->daddr;
 		if (type == RTN_LOCAL)
-			fl.nl_u.ip4_u.saddr = iph->saddr;
-		fl.nl_u.ip4_u.tos = RT_TOS(iph->tos);
+			fl.fl4_src = iph->saddr;
+		fl.fl4_tos = RT_TOS(iph->tos);
 		fl.oif = skb->sk ? skb->sk->sk_bound_dev_if : 0;
 		fl.mark = skb->mark;
 		fl.flags = skb->sk ? inet_sk_flowi_flags(skb->sk) : 0;
@@ -47,7 +47,7 @@ int ip_route_me_harder(struct sk_buff *skb, unsigned addr_type)
 	} else {
 		/* non-local src, find valid iif to satisfy
 		 * rp-filter when calling ip_route_input. */
-		fl.nl_u.ip4_u.daddr = iph->saddr;
+		fl.fl4_dst = iph->saddr;
 		if (ip_route_output_key(net, &rt, &fl) != 0)
 			return -1;
 
diff --git a/net/ipv4/netfilter/Makefile b/net/ipv4/netfilter/Makefile
index 48111594ee9..19eb59d0103 100644
--- a/net/ipv4/netfilter/Makefile
+++ b/net/ipv4/netfilter/Makefile
@@ -3,15 +3,15 @@
 #
 
 # objects for l3 independent conntrack
-nf_conntrack_ipv4-objs  :=  nf_conntrack_l3proto_ipv4.o nf_conntrack_proto_icmp.o
+nf_conntrack_ipv4-y	:=  nf_conntrack_l3proto_ipv4.o nf_conntrack_proto_icmp.o
 ifeq ($(CONFIG_NF_CONNTRACK_PROC_COMPAT),y)
 ifeq ($(CONFIG_PROC_FS),y)
 nf_conntrack_ipv4-objs	+= nf_conntrack_l3proto_ipv4_compat.o
 endif
 endif
 
-nf_nat-objs		:= nf_nat_core.o nf_nat_helper.o nf_nat_proto_unknown.o nf_nat_proto_common.o nf_nat_proto_tcp.o nf_nat_proto_udp.o nf_nat_proto_icmp.o
-iptable_nat-objs	:= nf_nat_rule.o nf_nat_standalone.o
+nf_nat-y		:= nf_nat_core.o nf_nat_helper.o nf_nat_proto_unknown.o nf_nat_proto_common.o nf_nat_proto_tcp.o nf_nat_proto_udp.o nf_nat_proto_icmp.o
+iptable_nat-y	:= nf_nat_rule.o nf_nat_standalone.o
 
 # connection tracking
 obj-$(CONFIG_NF_CONNTRACK_IPV4) += nf_conntrack_ipv4.o
diff --git a/net/ipv4/netfilter/arp_tables.c b/net/ipv4/netfilter/arp_tables.c
index 3fac340a28d..47e5178b998 100644
--- a/net/ipv4/netfilter/arp_tables.c
+++ b/net/ipv4/netfilter/arp_tables.c
@@ -883,6 +883,7 @@ static int compat_table_info(const struct xt_table_info *info,
 	memcpy(newinfo, info, offsetof(struct xt_table_info, entries));
 	newinfo->initial_entries = 0;
 	loc_cpu_entry = info->entries[raw_smp_processor_id()];
+	xt_compat_init_offsets(NFPROTO_ARP, info->number);
 	xt_entry_foreach(iter, loc_cpu_entry, info->size) {
 		ret = compat_calc_entry(iter, info, loc_cpu_entry, newinfo);
 		if (ret != 0)
@@ -1350,6 +1351,7 @@ static int translate_compat_table(const char *name,
 	duprintf("translate_compat_table: size %u\n", info->size);
 	j = 0;
 	xt_compat_lock(NFPROTO_ARP);
+	xt_compat_init_offsets(NFPROTO_ARP, number);
 	/* Walk through entries, checking offsets. */
 	xt_entry_foreach(iter0, entry0, total_size) {
 		ret = check_compat_entry_size_and_hooks(iter0, info, &size,
diff --git a/net/ipv4/netfilter/ip_tables.c b/net/ipv4/netfilter/ip_tables.c
index a846d633b3b..c5a75d70970 100644
--- a/net/ipv4/netfilter/ip_tables.c
+++ b/net/ipv4/netfilter/ip_tables.c
@@ -1080,6 +1080,7 @@ static int compat_table_info(const struct xt_table_info *info,
 	memcpy(newinfo, info, offsetof(struct xt_table_info, entries));
 	newinfo->initial_entries = 0;
 	loc_cpu_entry = info->entries[raw_smp_processor_id()];
+	xt_compat_init_offsets(AF_INET, info->number);
 	xt_entry_foreach(iter, loc_cpu_entry, info->size) {
 		ret = compat_calc_entry(iter, info, loc_cpu_entry, newinfo);
 		if (ret != 0)
@@ -1681,6 +1682,7 @@ translate_compat_table(struct net *net,
 	duprintf("translate_compat_table: size %u\n", info->size);
 	j = 0;
 	xt_compat_lock(AF_INET);
+	xt_compat_init_offsets(AF_INET, number);
 	/* Walk through entries, checking offsets. */
 	xt_entry_foreach(iter0, entry0, total_size) {
 		ret = check_compat_entry_size_and_hooks(iter0, info, &size,
diff --git a/net/ipv4/netfilter/ipt_REJECT.c b/net/ipv4/netfilter/ipt_REJECT.c
index 43eec80c0e7..1ff79e557f9 100644
--- a/net/ipv4/netfilter/ipt_REJECT.c
+++ b/net/ipv4/netfilter/ipt_REJECT.c
@@ -116,7 +116,7 @@ static void send_reset(struct sk_buff *oldskb, int hook)
 	if (ip_route_me_harder(nskb, addr_type))
 		goto free_nskb;
 
-	niph->ttl	= dst_metric(skb_dst(nskb), RTAX_HOPLIMIT);
+	niph->ttl	= ip4_dst_hoplimit(skb_dst(nskb));
 
 	/* "Never happens" */
 	if (nskb->len > dst_mtu(skb_dst(nskb)))
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
index ab9c05c9734..5585980fce2 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
@@ -100,7 +100,7 @@ static int ct_show_secctx(struct seq_file *s, const struct nf_conn *ct)
 
 	ret = security_secid_to_secctx(ct->secmark, &secctx, &len);
 	if (ret)
-		return ret;
+		return 0;
 
 	ret = seq_printf(s, "secctx=%s ", secctx);
 
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index 4ae1f203f7c..b14ec7d03b6 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -59,13 +59,13 @@ static int sockstat_seq_show(struct seq_file *seq, void *v)
 	local_bh_enable();
 
 	socket_seq_show(seq);
-	seq_printf(seq, "TCP: inuse %d orphan %d tw %d alloc %d mem %d\n",
+	seq_printf(seq, "TCP: inuse %d orphan %d tw %d alloc %d mem %ld\n",
 		   sock_prot_inuse_get(net, &tcp_prot), orphans,
 		   tcp_death_row.tw_count, sockets,
-		   atomic_read(&tcp_memory_allocated));
-	seq_printf(seq, "UDP: inuse %d mem %d\n",
+		   atomic_long_read(&tcp_memory_allocated));
+	seq_printf(seq, "UDP: inuse %d mem %ld\n",
 		   sock_prot_inuse_get(net, &udp_prot),
-		   atomic_read(&udp_memory_allocated));
+		   atomic_long_read(&udp_memory_allocated));
 	seq_printf(seq, "UDPLITE: inuse %d\n",
 		   sock_prot_inuse_get(net, &udplite_prot));
 	seq_printf(seq, "RAW: inuse %d\n",
@@ -253,6 +253,7 @@ static const struct snmp_mib snmp4_net_list[] = {
 	SNMP_MIB_ITEM("TCPMinTTLDrop", LINUX_MIB_TCPMINTTLDROP),
 	SNMP_MIB_ITEM("TCPDeferAcceptDrop", LINUX_MIB_TCPDEFERACCEPTDROP),
 	SNMP_MIB_ITEM("IPReversePathFilter", LINUX_MIB_IPRPFILTER),
+	SNMP_MIB_ITEM("TCPTimeWaitOverflow", LINUX_MIB_TCPTIMEWAITOVERFLOW),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 1f85ef28989..a3d5ab786e8 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -549,10 +549,9 @@ static int raw_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 	{
 		struct flowi fl = { .oif = ipc.oif,
 				    .mark = sk->sk_mark,
-				    .nl_u = { .ip4_u =
-					      { .daddr = daddr,
-						.saddr = saddr,
-						.tos = tos } },
+				    .fl4_dst = daddr,
+				    .fl4_src = saddr,
+				    .fl4_tos = tos,
 				    .proto = inet->hdrincl ? IPPROTO_RAW :
 							     sk->sk_protocol,
 				  };
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index f70ae1bccb8..3e5b7cc2db4 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -139,6 +139,8 @@ static unsigned long expires_ljiffies;
  */
 
 static struct dst_entry *ipv4_dst_check(struct dst_entry *dst, u32 cookie);
+static unsigned int	 ipv4_default_advmss(const struct dst_entry *dst);
+static unsigned int	 ipv4_default_mtu(const struct dst_entry *dst);
 static void		 ipv4_dst_destroy(struct dst_entry *dst);
 static struct dst_entry *ipv4_negative_advice(struct dst_entry *dst);
 static void		 ipv4_link_failure(struct sk_buff *skb);
@@ -155,6 +157,8 @@ static struct dst_ops ipv4_dst_ops = {
 	.protocol =		cpu_to_be16(ETH_P_IP),
 	.gc =			rt_garbage_collect,
 	.check =		ipv4_dst_check,
+	.default_advmss =	ipv4_default_advmss,
+	.default_mtu =		ipv4_default_mtu,
 	.destroy =		ipv4_dst_destroy,
 	.ifdown =		ipv4_dst_ifdown,
 	.negative_advice =	ipv4_negative_advice,
@@ -383,8 +387,7 @@ static int rt_cache_seq_show(struct seq_file *seq, void *v)
 			(__force u32)r->rt_gateway,
 			r->rt_flags, atomic_read(&r->dst.__refcnt),
 			r->dst.__use, 0, (__force u32)r->rt_src,
-			(dst_metric(&r->dst, RTAX_ADVMSS) ?
-			     (int)dst_metric(&r->dst, RTAX_ADVMSS) + 40 : 0),
+			dst_metric_advmss(&r->dst) + 40,
 			dst_metric(&r->dst, RTAX_WINDOW),
 			(int)((dst_metric(&r->dst, RTAX_RTT) >> 3) +
 			      dst_metric(&r->dst, RTAX_RTTVAR)),
@@ -684,17 +687,17 @@ static inline bool rt_caching(const struct net *net)
 static inline bool compare_hash_inputs(const struct flowi *fl1,
 					const struct flowi *fl2)
 {
-	return ((((__force u32)fl1->nl_u.ip4_u.daddr ^ (__force u32)fl2->nl_u.ip4_u.daddr) |
-		((__force u32)fl1->nl_u.ip4_u.saddr ^ (__force u32)fl2->nl_u.ip4_u.saddr) |
+	return ((((__force u32)fl1->fl4_dst ^ (__force u32)fl2->fl4_dst) |
+		((__force u32)fl1->fl4_src ^ (__force u32)fl2->fl4_src) |
 		(fl1->iif ^ fl2->iif)) == 0);
 }
 
 static inline int compare_keys(struct flowi *fl1, struct flowi *fl2)
 {
-	return (((__force u32)fl1->nl_u.ip4_u.daddr ^ (__force u32)fl2->nl_u.ip4_u.daddr) |
-		((__force u32)fl1->nl_u.ip4_u.saddr ^ (__force u32)fl2->nl_u.ip4_u.saddr) |
+	return (((__force u32)fl1->fl4_dst ^ (__force u32)fl2->fl4_dst) |
+		((__force u32)fl1->fl4_src ^ (__force u32)fl2->fl4_src) |
 		(fl1->mark ^ fl2->mark) |
-		(*(u16 *)&fl1->nl_u.ip4_u.tos ^ *(u16 *)&fl2->nl_u.ip4_u.tos) |
+		(*(u16 *)&fl1->fl4_tos ^ *(u16 *)&fl2->fl4_tos) |
 		(fl1->oif ^ fl2->oif) |
 		(fl1->iif ^ fl2->iif)) == 0;
 }
@@ -714,13 +717,15 @@ static inline int rt_is_expired(struct rtable *rth)
  * Can be called by a softirq or a process.
  * In the later case, we want to be reschedule if necessary
  */
-static void rt_do_flush(int process_context)
+static void rt_do_flush(struct net *net, int process_context)
 {
 	unsigned int i;
 	struct rtable *rth, *next;
-	struct rtable * tail;
 
 	for (i = 0; i <= rt_hash_mask; i++) {
+		struct rtable __rcu **pprev;
+		struct rtable *list;
+
 		if (process_context && need_resched())
 			cond_resched();
 		rth = rcu_dereference_raw(rt_hash_table[i].chain);
@@ -728,50 +733,32 @@ static void rt_do_flush(int process_context)
 			continue;
 
 		spin_lock_bh(rt_hash_lock_addr(i));
-#ifdef CONFIG_NET_NS
-		{
-		struct rtable __rcu **prev;
-		struct rtable *p;
 
-		rth = rcu_dereference_protected(rt_hash_table[i].chain,
+		list = NULL;
+		pprev = &rt_hash_table[i].chain;
+		rth = rcu_dereference_protected(*pprev,
 			lockdep_is_held(rt_hash_lock_addr(i)));
 
-		/* defer releasing the head of the list after spin_unlock */
-		for (tail = rth; tail;
-		     tail = rcu_dereference_protected(tail->dst.rt_next,
-				lockdep_is_held(rt_hash_lock_addr(i))))
-			if (!rt_is_expired(tail))
-				break;
-		if (rth != tail)
-			rt_hash_table[i].chain = tail;
-
-		/* call rt_free on entries after the tail requiring flush */
-		prev = &rt_hash_table[i].chain;
-		for (p = rcu_dereference_protected(*prev,
+		while (rth) {
+			next = rcu_dereference_protected(rth->dst.rt_next,
 				lockdep_is_held(rt_hash_lock_addr(i)));
-		     p != NULL;
-		     p = next) {
-			next = rcu_dereference_protected(p->dst.rt_next,
-				lockdep_is_held(rt_hash_lock_addr(i)));
-			if (!rt_is_expired(p)) {
-				prev = &p->dst.rt_next;
+
+			if (!net ||
+			    net_eq(dev_net(rth->dst.dev), net)) {
+				rcu_assign_pointer(*pprev, next);
+				rcu_assign_pointer(rth->dst.rt_next, list);
+				list = rth;
 			} else {
-				*prev = next;
-				rt_free(p);
+				pprev = &rth->dst.rt_next;
 			}
+			rth = next;
 		}
-		}
-#else
-		rth = rcu_dereference_protected(rt_hash_table[i].chain,
-			lockdep_is_held(rt_hash_lock_addr(i)));
-		rcu_assign_pointer(rt_hash_table[i].chain, NULL);
-		tail = NULL;
-#endif
+
 		spin_unlock_bh(rt_hash_lock_addr(i));
 
-		for (; rth != tail; rth = next) {
-			next = rcu_dereference_protected(rth->dst.rt_next, 1);
-			rt_free(rth);
+		for (; list; list = next) {
+			next = rcu_dereference_protected(list->dst.rt_next, 1);
+			rt_free(list);
 		}
 	}
 }
@@ -919,13 +906,13 @@ void rt_cache_flush(struct net *net, int delay)
 {
 	rt_cache_invalidate(net);
 	if (delay >= 0)
-		rt_do_flush(!in_softirq());
+		rt_do_flush(net, !in_softirq());
 }
 
 /* Flush previous cache invalidated entries from the cache */
-void rt_cache_flush_batch(void)
+void rt_cache_flush_batch(struct net *net)
 {
-	rt_do_flush(!in_softirq());
+	rt_do_flush(net, !in_softirq());
 }
 
 static void rt_emergency_hash_rebuild(struct net *net)
@@ -1289,7 +1276,7 @@ void rt_bind_peer(struct rtable *rt, int create)
 {
 	struct inet_peer *peer;
 
-	peer = inet_getpeer(rt->rt_dst, create);
+	peer = inet_getpeer_v4(rt->rt_dst, create);
 
 	if (peer && cmpxchg(&rt->peer, NULL, peer) != NULL)
 		inet_putpeer(peer);
@@ -1686,11 +1673,14 @@ unsigned short ip_rt_frag_needed(struct net *net, struct iphdr *iph,
 					if (mtu < dst_mtu(&rth->dst)) {
 						dst_confirm(&rth->dst);
 						if (mtu < ip_rt_min_pmtu) {
+							u32 lock = dst_metric(&rth->dst,
+									      RTAX_LOCK);
 							mtu = ip_rt_min_pmtu;
-							rth->dst.metrics[RTAX_LOCK-1] |=
-								(1 << RTAX_MTU);
+							lock |= (1 << RTAX_MTU);
+							dst_metric_set(&rth->dst, RTAX_LOCK,
+								       lock);
 						}
-						rth->dst.metrics[RTAX_MTU-1] = mtu;
+						dst_metric_set(&rth->dst, RTAX_MTU, mtu);
 						dst_set_expires(&rth->dst,
 							ip_rt_mtu_expires);
 					}
@@ -1708,10 +1698,11 @@ static void ip_rt_update_pmtu(struct dst_entry *dst, u32 mtu)
 	if (dst_mtu(dst) > mtu && mtu >= 68 &&
 	    !(dst_metric_locked(dst, RTAX_MTU))) {
 		if (mtu < ip_rt_min_pmtu) {
+			u32 lock = dst_metric(dst, RTAX_LOCK);
 			mtu = ip_rt_min_pmtu;
-			dst->metrics[RTAX_LOCK-1] |= (1 << RTAX_MTU);
+			dst_metric_set(dst, RTAX_LOCK, lock | (1 << RTAX_MTU));
 		}
-		dst->metrics[RTAX_MTU-1] = mtu;
+		dst_metric_set(dst, RTAX_MTU, mtu);
 		dst_set_expires(dst, ip_rt_mtu_expires);
 		call_netevent_notifiers(NETEVENT_PMTU_UPDATE, dst);
 	}
@@ -1794,38 +1785,55 @@ static void set_class_tag(struct rtable *rt, u32 tag)
 }
 #endif
 
+static unsigned int ipv4_default_advmss(const struct dst_entry *dst)
+{
+	unsigned int advmss = dst_metric_raw(dst, RTAX_ADVMSS);
+
+	if (advmss == 0) {
+		advmss = max_t(unsigned int, dst->dev->mtu - 40,
+			       ip_rt_min_advmss);
+		if (advmss > 65535 - 40)
+			advmss = 65535 - 40;
+	}
+	return advmss;
+}
+
+static unsigned int ipv4_default_mtu(const struct dst_entry *dst)
+{
+	unsigned int mtu = dst->dev->mtu;
+
+	if (unlikely(dst_metric_locked(dst, RTAX_MTU))) {
+		const struct rtable *rt = (const struct rtable *) dst;
+
+		if (rt->rt_gateway != rt->rt_dst && mtu > 576)
+			mtu = 576;
+	}
+
+	if (mtu > IP_MAX_MTU)
+		mtu = IP_MAX_MTU;
+
+	return mtu;
+}
+
 static void rt_set_nexthop(struct rtable *rt, struct fib_result *res, u32 itag)
 {
+	struct dst_entry *dst = &rt->dst;
 	struct fib_info *fi = res->fi;
 
 	if (fi) {
 		if (FIB_RES_GW(*res) &&
 		    FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK)
 			rt->rt_gateway = FIB_RES_GW(*res);
-		memcpy(rt->dst.metrics, fi->fib_metrics,
-		       sizeof(rt->dst.metrics));
-		if (fi->fib_mtu == 0) {
-			rt->dst.metrics[RTAX_MTU-1] = rt->dst.dev->mtu;
-			if (dst_metric_locked(&rt->dst, RTAX_MTU) &&
-			    rt->rt_gateway != rt->rt_dst &&
-			    rt->dst.dev->mtu > 576)
-				rt->dst.metrics[RTAX_MTU-1] = 576;
-		}
+		dst_import_metrics(dst, fi->fib_metrics);
 #ifdef CONFIG_IP_ROUTE_CLASSID
-		rt->dst.tclassid = FIB_RES_NH(*res).nh_tclassid;
+		dst->tclassid = FIB_RES_NH(*res).nh_tclassid;
 #endif
-	} else
-		rt->dst.metrics[RTAX_MTU-1]= rt->dst.dev->mtu;
-
-	if (dst_metric(&rt->dst, RTAX_HOPLIMIT) == 0)
-		rt->dst.metrics[RTAX_HOPLIMIT-1] = sysctl_ip_default_ttl;
-	if (dst_mtu(&rt->dst) > IP_MAX_MTU)
-		rt->dst.metrics[RTAX_MTU-1] = IP_MAX_MTU;
-	if (dst_metric(&rt->dst, RTAX_ADVMSS) == 0)
-		rt->dst.metrics[RTAX_ADVMSS-1] = max_t(unsigned int, rt->dst.dev->mtu - 40,
-				       ip_rt_min_advmss);
-	if (dst_metric(&rt->dst, RTAX_ADVMSS) > 65535 - 40)
-		rt->dst.metrics[RTAX_ADVMSS-1] = 65535 - 40;
+	}
+
+	if (dst_mtu(dst) > IP_MAX_MTU)
+		dst_metric_set(dst, RTAX_MTU, IP_MAX_MTU);
+	if (dst_metric_raw(dst, RTAX_ADVMSS) > 65535 - 40)
+		dst_metric_set(dst, RTAX_ADVMSS, 65535 - 40);
 
 #ifdef CONFIG_IP_ROUTE_CLASSID
 #ifdef CONFIG_IP_MULTIPLE_TABLES
@@ -2089,12 +2097,10 @@ static int ip_route_input_slow(struct sk_buff *skb, __be32 daddr, __be32 saddr,
 {
 	struct fib_result res;
 	struct in_device *in_dev = __in_dev_get_rcu(dev);
-	struct flowi fl = { .nl_u = { .ip4_u =
-				      { .daddr = daddr,
-					.saddr = saddr,
-					.tos = tos,
-					.scope = RT_SCOPE_UNIVERSE,
-				      } },
+	struct flowi fl = { .fl4_dst	= daddr,
+			    .fl4_src	= saddr,
+			    .fl4_tos	= tos,
+			    .fl4_scope	= RT_SCOPE_UNIVERSE,
 			    .mark = skb->mark,
 			    .iif = dev->ifindex };
 	unsigned	flags = 0;
@@ -2480,14 +2486,11 @@ static int ip_route_output_slow(struct net *net, struct rtable **rp,
 				const struct flowi *oldflp)
 {
 	u32 tos	= RT_FL_TOS(oldflp);
-	struct flowi fl = { .nl_u = { .ip4_u =
-				      { .daddr = oldflp->fl4_dst,
-					.saddr = oldflp->fl4_src,
-					.tos = tos & IPTOS_RT_MASK,
-					.scope = ((tos & RTO_ONLINK) ?
-						  RT_SCOPE_LINK :
-						  RT_SCOPE_UNIVERSE),
-				      } },
+	struct flowi fl = { .fl4_dst = oldflp->fl4_dst,
+			    .fl4_src = oldflp->fl4_src,
+			    .fl4_tos = tos & IPTOS_RT_MASK,
+			    .fl4_scope = ((tos & RTO_ONLINK) ?
+					  RT_SCOPE_LINK : RT_SCOPE_UNIVERSE),
 			    .mark = oldflp->mark,
 			    .iif = net->loopback_dev->ifindex,
 			    .oif = oldflp->oif };
@@ -2559,9 +2562,10 @@ static int ip_route_output_slow(struct net *net, struct rtable **rp,
 			goto out;
 
 		/* RACE: Check return value of inet_select_addr instead. */
-		if (rcu_dereference(dev_out->ip_ptr) == NULL)
-			goto out;	/* Wrong error code */
-
+		if (!(dev_out->flags & IFF_UP) || !__in_dev_get_rcu(dev_out)) {
+			err = -ENETUNREACH;
+			goto out;
+		}
 		if (ipv4_is_local_multicast(oldflp->fl4_dst) ||
 		    ipv4_is_lbcast(oldflp->fl4_dst)) {
 			if (!fl.fl4_src)
@@ -2622,8 +2626,12 @@ static int ip_route_output_slow(struct net *net, struct rtable **rp,
 	}
 
 	if (res.type == RTN_LOCAL) {
-		if (!fl.fl4_src)
-			fl.fl4_src = fl.fl4_dst;
+		if (!fl.fl4_src) {
+			if (res.fi->fib_prefsrc)
+				fl.fl4_src = res.fi->fib_prefsrc;
+			else
+				fl.fl4_src = fl.fl4_dst;
+		}
 		dev_out = net->loopback_dev;
 		fl.oif = dev_out->ifindex;
 		res.fi = NULL;
@@ -2725,7 +2733,7 @@ static int ipv4_dst_blackhole(struct net *net, struct rtable **rp, struct flowi
 		new->__use = 1;
 		new->input = dst_discard;
 		new->output = dst_discard;
-		memcpy(new->metrics, ort->dst.metrics, RTAX_MAX*sizeof(u32));
+		dst_copy_metrics(new, &ort->dst);
 
 		new->dev = ort->dst.dev;
 		if (new->dev)
@@ -2832,7 +2840,7 @@ static int rt_fill_info(struct net *net,
 	if (rt->rt_dst != rt->rt_gateway)
 		NLA_PUT_BE32(skb, RTA_GATEWAY, rt->rt_gateway);
 
-	if (rtnetlink_put_metrics(skb, rt->dst.metrics) < 0)
+	if (rtnetlink_put_metrics(skb, dst_metrics_ptr(&rt->dst)) < 0)
 		goto nla_put_failure;
 
 	if (rt->fl.mark)
@@ -2944,13 +2952,9 @@ static int inet_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void
 			err = -rt->dst.error;
 	} else {
 		struct flowi fl = {
-			.nl_u = {
-				.ip4_u = {
-					.daddr = dst,
-					.saddr = src,
-					.tos = rtm->rtm_tos,
-				},
-			},
+			.fl4_dst = dst,
+			.fl4_src = src,
+			.fl4_tos = rtm->rtm_tos,
 			.oif = tb[RTA_OIF] ? nla_get_u32(tb[RTA_OIF]) : 0,
 			.mark = mark,
 		};
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 650cace2180..47519205a01 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -346,17 +346,14 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb,
 	 */
 	{
 		struct flowi fl = { .mark = sk->sk_mark,
-				    .nl_u = { .ip4_u =
-					      { .daddr = ((opt && opt->srr) ?
-							  opt->faddr :
-							  ireq->rmt_addr),
-						.saddr = ireq->loc_addr,
-						.tos = RT_CONN_FLAGS(sk) } },
+				    .fl4_dst = ((opt && opt->srr) ?
+						opt->faddr : ireq->rmt_addr),
+				    .fl4_src = ireq->loc_addr,
+				    .fl4_tos = RT_CONN_FLAGS(sk),
 				    .proto = IPPROTO_TCP,
 				    .flags = inet_sk_flowi_flags(sk),
-				    .uli_u = { .ports =
-					       { .sport = th->dest,
-						 .dport = th->source } } };
+				    .fl_ip_sport = th->dest,
+				    .fl_ip_dport = th->source };
 		security_req_classify_flow(req, &fl);
 		if (ip_route_output_key(sock_net(sk), &rt, &fl)) {
 			reqsk_free(req);
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index d96c1da4b17..1a456652086 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -26,6 +26,10 @@ static int zero;
 static int tcp_retr1_max = 255;
 static int ip_local_port_range_min[] = { 1, 1 };
 static int ip_local_port_range_max[] = { 65535, 65535 };
+static int tcp_adv_win_scale_min = -31;
+static int tcp_adv_win_scale_max = 31;
+static int ip_ttl_min = 1;
+static int ip_ttl_max = 255;
 
 /* Update system visible IP port range */
 static void set_local_port_range(int range[2])
@@ -153,8 +157,9 @@ static struct ctl_table ipv4_table[] = {
 		.data		= &sysctl_ip_default_ttl,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= ipv4_doint_and_flush,
-		.extra2		= &init_net,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &ip_ttl_min,
+		.extra2		= &ip_ttl_max,
 	},
 	{
 		.procname	= "ip_no_pmtu_disc",
@@ -398,7 +403,7 @@ static struct ctl_table ipv4_table[] = {
 		.data		= &sysctl_tcp_mem,
 		.maxlen		= sizeof(sysctl_tcp_mem),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec
+		.proc_handler	= proc_doulongvec_minmax
 	},
 	{
 		.procname	= "tcp_wmem",
@@ -426,7 +431,9 @@ static struct ctl_table ipv4_table[] = {
 		.data		= &sysctl_tcp_adv_win_scale,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &tcp_adv_win_scale_min,
+		.extra2		= &tcp_adv_win_scale_max,
 	},
 	{
 		.procname	= "tcp_tw_reuse",
@@ -602,8 +609,7 @@ static struct ctl_table ipv4_table[] = {
 		.data		= &sysctl_udp_mem,
 		.maxlen		= sizeof(sysctl_udp_mem),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &zero
+		.proc_handler	= proc_doulongvec_minmax,
 	},
 	{
 		.procname	= "udp_rmem_min",
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 5f738c5c0dc..6c11eece262 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -282,7 +282,7 @@ int sysctl_tcp_fin_timeout __read_mostly = TCP_FIN_TIMEOUT;
 struct percpu_counter tcp_orphan_count;
 EXPORT_SYMBOL_GPL(tcp_orphan_count);
 
-int sysctl_tcp_mem[3] __read_mostly;
+long sysctl_tcp_mem[3] __read_mostly;
 int sysctl_tcp_wmem[3] __read_mostly;
 int sysctl_tcp_rmem[3] __read_mostly;
 
@@ -290,7 +290,7 @@ EXPORT_SYMBOL(sysctl_tcp_mem);
 EXPORT_SYMBOL(sysctl_tcp_rmem);
 EXPORT_SYMBOL(sysctl_tcp_wmem);
 
-atomic_t tcp_memory_allocated;	/* Current allocated memory. */
+atomic_long_t tcp_memory_allocated;	/* Current allocated memory. */
 EXPORT_SYMBOL(tcp_memory_allocated);
 
 /*
@@ -2244,7 +2244,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level,
 		/* Values greater than interface MTU won't take effect. However
 		 * at the point when this call is done we typically don't yet
 		 * know which interface is going to be used */
-		if (val < 8 || val > MAX_TCP_WINDOW) {
+		if (val < TCP_MIN_MSS || val > MAX_TCP_WINDOW) {
 			err = -EINVAL;
 			break;
 		}
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 3357f69e353..2549b29b062 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -259,8 +259,11 @@ static void tcp_fixup_sndbuf(struct sock *sk)
 	int sndmem = tcp_sk(sk)->rx_opt.mss_clamp + MAX_TCP_HEADER + 16 +
 		     sizeof(struct sk_buff);
 
-	if (sk->sk_sndbuf < 3 * sndmem)
-		sk->sk_sndbuf = min(3 * sndmem, sysctl_tcp_wmem[2]);
+	if (sk->sk_sndbuf < 3 * sndmem) {
+		sk->sk_sndbuf = 3 * sndmem;
+		if (sk->sk_sndbuf > sysctl_tcp_wmem[2])
+			sk->sk_sndbuf = sysctl_tcp_wmem[2];
+	}
 }
 
 /* 2. Tuning advertised window (window_clamp, rcv_ssthresh)
@@ -396,7 +399,7 @@ static void tcp_clamp_window(struct sock *sk)
 	if (sk->sk_rcvbuf < sysctl_tcp_rmem[2] &&
 	    !(sk->sk_userlocks & SOCK_RCVBUF_LOCK) &&
 	    !tcp_memory_pressure &&
-	    atomic_read(&tcp_memory_allocated) < sysctl_tcp_mem[0]) {
+	    atomic_long_read(&tcp_memory_allocated) < sysctl_tcp_mem[0]) {
 		sk->sk_rcvbuf = min(atomic_read(&sk->sk_rmem_alloc),
 				    sysctl_tcp_rmem[2]);
 	}
@@ -731,7 +734,7 @@ void tcp_update_metrics(struct sock *sk)
 			 * Reset our results.
 			 */
 			if (!(dst_metric_locked(dst, RTAX_RTT)))
-				dst->metrics[RTAX_RTT - 1] = 0;
+				dst_metric_set(dst, RTAX_RTT, 0);
 			return;
 		}
 
@@ -773,34 +776,38 @@ void tcp_update_metrics(struct sock *sk)
 			if (dst_metric(dst, RTAX_SSTHRESH) &&
 			    !dst_metric_locked(dst, RTAX_SSTHRESH) &&
 			    (tp->snd_cwnd >> 1) > dst_metric(dst, RTAX_SSTHRESH))
-				dst->metrics[RTAX_SSTHRESH-1] = tp->snd_cwnd >> 1;
+				dst_metric_set(dst, RTAX_SSTHRESH, tp->snd_cwnd >> 1);
 			if (!dst_metric_locked(dst, RTAX_CWND) &&
 			    tp->snd_cwnd > dst_metric(dst, RTAX_CWND))
-				dst->metrics[RTAX_CWND - 1] = tp->snd_cwnd;
+				dst_metric_set(dst, RTAX_CWND, tp->snd_cwnd);
 		} else if (tp->snd_cwnd > tp->snd_ssthresh &&
 			   icsk->icsk_ca_state == TCP_CA_Open) {
 			/* Cong. avoidance phase, cwnd is reliable. */
 			if (!dst_metric_locked(dst, RTAX_SSTHRESH))
-				dst->metrics[RTAX_SSTHRESH-1] =
-					max(tp->snd_cwnd >> 1, tp->snd_ssthresh);
+				dst_metric_set(dst, RTAX_SSTHRESH,
+					       max(tp->snd_cwnd >> 1, tp->snd_ssthresh));
 			if (!dst_metric_locked(dst, RTAX_CWND))
-				dst->metrics[RTAX_CWND-1] = (dst_metric(dst, RTAX_CWND) + tp->snd_cwnd) >> 1;
+				dst_metric_set(dst, RTAX_CWND,
+					       (dst_metric(dst, RTAX_CWND) +
+						tp->snd_cwnd) >> 1);
 		} else {
 			/* Else slow start did not finish, cwnd is non-sense,
 			   ssthresh may be also invalid.
 			 */
 			if (!dst_metric_locked(dst, RTAX_CWND))
-				dst->metrics[RTAX_CWND-1] = (dst_metric(dst, RTAX_CWND) + tp->snd_ssthresh) >> 1;
+				dst_metric_set(dst, RTAX_CWND,
+					       (dst_metric(dst, RTAX_CWND) +
+						tp->snd_ssthresh) >> 1);
 			if (dst_metric(dst, RTAX_SSTHRESH) &&
 			    !dst_metric_locked(dst, RTAX_SSTHRESH) &&
 			    tp->snd_ssthresh > dst_metric(dst, RTAX_SSTHRESH))
-				dst->metrics[RTAX_SSTHRESH-1] = tp->snd_ssthresh;
+				dst_metric_set(dst, RTAX_SSTHRESH, tp->snd_ssthresh);
 		}
 
 		if (!dst_metric_locked(dst, RTAX_REORDERING)) {
 			if (dst_metric(dst, RTAX_REORDERING) < tp->reordering &&
 			    tp->reordering != sysctl_tcp_reordering)
-				dst->metrics[RTAX_REORDERING-1] = tp->reordering;
+				dst_metric_set(dst, RTAX_REORDERING, tp->reordering);
 		}
 	}
 }
@@ -909,25 +916,20 @@ static void tcp_init_metrics(struct sock *sk)
 		tp->mdev_max = tp->rttvar = max(tp->mdev, tcp_rto_min(sk));
 	}
 	tcp_set_rto(sk);
-	if (inet_csk(sk)->icsk_rto < TCP_TIMEOUT_INIT && !tp->rx_opt.saw_tstamp)
-		goto reset;
-
-cwnd:
-	tp->snd_cwnd = tcp_init_cwnd(tp, dst);
-	tp->snd_cwnd_stamp = tcp_time_stamp;
-	return;
-
+	if (inet_csk(sk)->icsk_rto < TCP_TIMEOUT_INIT && !tp->rx_opt.saw_tstamp) {
 reset:
-	/* Play conservative. If timestamps are not
-	 * supported, TCP will fail to recalculate correct
-	 * rtt, if initial rto is too small. FORGET ALL AND RESET!
-	 */
-	if (!tp->rx_opt.saw_tstamp && tp->srtt) {
-		tp->srtt = 0;
-		tp->mdev = tp->mdev_max = tp->rttvar = TCP_TIMEOUT_INIT;
-		inet_csk(sk)->icsk_rto = TCP_TIMEOUT_INIT;
+		/* Play conservative. If timestamps are not
+		 * supported, TCP will fail to recalculate correct
+		 * rtt, if initial rto is too small. FORGET ALL AND RESET!
+		 */
+		if (!tp->rx_opt.saw_tstamp && tp->srtt) {
+			tp->srtt = 0;
+			tp->mdev = tp->mdev_max = tp->rttvar = TCP_TIMEOUT_INIT;
+			inet_csk(sk)->icsk_rto = TCP_TIMEOUT_INIT;
+		}
 	}
-	goto cwnd;
+	tp->snd_cwnd = tcp_init_cwnd(tp, dst);
+	tp->snd_cwnd_stamp = tcp_time_stamp;
 }
 
 static void tcp_update_reordering(struct sock *sk, const int metric,
@@ -4861,7 +4863,7 @@ static int tcp_should_expand_sndbuf(struct sock *sk)
 		return 0;
 
 	/* If we are under soft global TCP memory pressure, do not expand.  */
-	if (atomic_read(&tcp_memory_allocated) >= sysctl_tcp_mem[0])
+	if (atomic_long_read(&tcp_memory_allocated) >= sysctl_tcp_mem[0])
 		return 0;
 
 	/* If we filled the congestion window, do not expand.  */
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 8f8527d4168..856f68466d4 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -415,6 +415,9 @@ void tcp_v4_err(struct sk_buff *icmp_skb, u32 info)
 		    !icsk->icsk_backoff)
 			break;
 
+		if (sock_owned_by_user(sk))
+			break;
+
 		icsk->icsk_backoff--;
 		inet_csk(sk)->icsk_rto = __tcp_set_rto(tp) <<
 					 icsk->icsk_backoff;
@@ -429,11 +432,6 @@ void tcp_v4_err(struct sk_buff *icmp_skb, u32 info)
 		if (remaining) {
 			inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
 						  remaining, TCP_RTO_MAX);
-		} else if (sock_owned_by_user(sk)) {
-			/* RTO revert clocked out retransmission,
-			 * but socket is locked. Will defer. */
-			inet_csk_reset_xmit_timer(sk, ICSK_TIME_RETRANS,
-						  HZ/20, TCP_RTO_MAX);
 		} else {
 			/* RTO revert clocked out retransmission.
 			 * Will retransmit now */
@@ -1212,12 +1210,6 @@ static const struct tcp_request_sock_ops tcp_request_sock_ipv4_ops = {
 };
 #endif
 
-static struct timewait_sock_ops tcp_timewait_sock_ops = {
-	.twsk_obj_size	= sizeof(struct tcp_timewait_sock),
-	.twsk_unique	= tcp_twsk_unique,
-	.twsk_destructor= tcp_twsk_destructor,
-};
-
 int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
 {
 	struct tcp_extend_values tmp_ext;
@@ -1349,7 +1341,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb)
 		    tcp_death_row.sysctl_tw_recycle &&
 		    (dst = inet_csk_route_req(sk, req)) != NULL &&
 		    (peer = rt_get_peer((struct rtable *)dst)) != NULL &&
-		    peer->v4daddr == saddr) {
+		    peer->daddr.a4 == saddr) {
 			inet_peer_refcheck(peer);
 			if ((u32)get_seconds() - peer->tcp_ts_stamp < TCP_PAWS_MSL &&
 			    (s32)(peer->tcp_ts - req->ts_recent) >
@@ -1444,7 +1436,7 @@ struct sock *tcp_v4_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
 
 	tcp_mtup_init(newsk);
 	tcp_sync_mss(newsk, dst_mtu(dst));
-	newtp->advmss = dst_metric(dst, RTAX_ADVMSS);
+	newtp->advmss = dst_metric_advmss(dst);
 	if (tcp_sk(sk)->rx_opt.user_mss &&
 	    tcp_sk(sk)->rx_opt.user_mss < newtp->advmss)
 		newtp->advmss = tcp_sk(sk)->rx_opt.user_mss;
@@ -1765,64 +1757,40 @@ do_time_wait:
 	goto discard_it;
 }
 
-/* VJ's idea. Save last timestamp seen from this destination
- * and hold it at least for normal timewait interval to use for duplicate
- * segment detection in subsequent connections, before they enter synchronized
- * state.
- */
-
-int tcp_v4_remember_stamp(struct sock *sk)
+struct inet_peer *tcp_v4_get_peer(struct sock *sk, bool *release_it)
 {
+	struct rtable *rt = (struct rtable *) __sk_dst_get(sk);
 	struct inet_sock *inet = inet_sk(sk);
-	struct tcp_sock *tp = tcp_sk(sk);
-	struct rtable *rt = (struct rtable *)__sk_dst_get(sk);
-	struct inet_peer *peer = NULL;
-	int release_it = 0;
+	struct inet_peer *peer;
 
 	if (!rt || rt->rt_dst != inet->inet_daddr) {
-		peer = inet_getpeer(inet->inet_daddr, 1);
-		release_it = 1;
+		peer = inet_getpeer_v4(inet->inet_daddr, 1);
+		*release_it = true;
 	} else {
 		if (!rt->peer)
 			rt_bind_peer(rt, 1);
 		peer = rt->peer;
+		*release_it = false;
 	}
 
-	if (peer) {
-		if ((s32)(peer->tcp_ts - tp->rx_opt.ts_recent) <= 0 ||
-		    ((u32)get_seconds() - peer->tcp_ts_stamp > TCP_PAWS_MSL &&
-		     peer->tcp_ts_stamp <= (u32)tp->rx_opt.ts_recent_stamp)) {
-			peer->tcp_ts_stamp = (u32)tp->rx_opt.ts_recent_stamp;
-			peer->tcp_ts = tp->rx_opt.ts_recent;
-		}
-		if (release_it)
-			inet_putpeer(peer);
-		return 1;
-	}
-
-	return 0;
+	return peer;
 }
-EXPORT_SYMBOL(tcp_v4_remember_stamp);
+EXPORT_SYMBOL(tcp_v4_get_peer);
 
-int tcp_v4_tw_remember_stamp(struct inet_timewait_sock *tw)
+void *tcp_v4_tw_get_peer(struct sock *sk)
 {
-	struct inet_peer *peer = inet_getpeer(tw->tw_daddr, 1);
-
-	if (peer) {
-		const struct tcp_timewait_sock *tcptw = tcp_twsk((struct sock *)tw);
-
-		if ((s32)(peer->tcp_ts - tcptw->tw_ts_recent) <= 0 ||
-		    ((u32)get_seconds() - peer->tcp_ts_stamp > TCP_PAWS_MSL &&
-		     peer->tcp_ts_stamp <= (u32)tcptw->tw_ts_recent_stamp)) {
-			peer->tcp_ts_stamp = (u32)tcptw->tw_ts_recent_stamp;
-			peer->tcp_ts	   = tcptw->tw_ts_recent;
-		}
-		inet_putpeer(peer);
-		return 1;
-	}
+	struct inet_timewait_sock *tw = inet_twsk(sk);
 
-	return 0;
+	return inet_getpeer_v4(tw->tw_daddr, 1);
 }
+EXPORT_SYMBOL(tcp_v4_tw_get_peer);
+
+static struct timewait_sock_ops tcp_timewait_sock_ops = {
+	.twsk_obj_size	= sizeof(struct tcp_timewait_sock),
+	.twsk_unique	= tcp_twsk_unique,
+	.twsk_destructor= tcp_twsk_destructor,
+	.twsk_getpeer	= tcp_v4_tw_get_peer,
+};
 
 const struct inet_connection_sock_af_ops ipv4_specific = {
 	.queue_xmit	   = ip_queue_xmit,
@@ -1830,7 +1798,7 @@ const struct inet_connection_sock_af_ops ipv4_specific = {
 	.rebuild_header	   = inet_sk_rebuild_header,
 	.conn_request	   = tcp_v4_conn_request,
 	.syn_recv_sock	   = tcp_v4_syn_recv_sock,
-	.remember_stamp	   = tcp_v4_remember_stamp,
+	.get_peer	   = tcp_v4_get_peer,
 	.net_header_len	   = sizeof(struct iphdr),
 	.setsockopt	   = ip_setsockopt,
 	.getsockopt	   = ip_getsockopt,
@@ -2032,7 +2000,7 @@ static void *listening_get_next(struct seq_file *seq, void *cur)
 get_req:
 			req = icsk->icsk_accept_queue.listen_opt->syn_table[st->sbucket];
 		}
-		sk	  = sk_next(st->syn_wait_sk);
+		sk	  = sk_nulls_next(st->syn_wait_sk);
 		st->state = TCP_SEQ_STATE_LISTENING;
 		read_unlock_bh(&icsk->icsk_accept_queue.syn_wait_lock);
 	} else {
@@ -2041,11 +2009,13 @@ get_req:
 		if (reqsk_queue_len(&icsk->icsk_accept_queue))
 			goto start_req;
 		read_unlock_bh(&icsk->icsk_accept_queue.syn_wait_lock);
-		sk = sk_next(sk);
+		sk = sk_nulls_next(sk);
 	}
 get_sk:
 	sk_nulls_for_each_from(sk, node) {
-		if (sk->sk_family == st->family && net_eq(sock_net(sk), net)) {
+		if (!net_eq(sock_net(sk), net))
+			continue;
+		if (sk->sk_family == st->family) {
 			cur = sk;
 			goto out;
 		}
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 43cf901d765..80b1f80759a 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -49,6 +49,56 @@ struct inet_timewait_death_row tcp_death_row = {
 };
 EXPORT_SYMBOL_GPL(tcp_death_row);
 
+/* VJ's idea. Save last timestamp seen from this destination
+ * and hold it at least for normal timewait interval to use for duplicate
+ * segment detection in subsequent connections, before they enter synchronized
+ * state.
+ */
+
+static int tcp_remember_stamp(struct sock *sk)
+{
+	const struct inet_connection_sock *icsk = inet_csk(sk);
+	struct tcp_sock *tp = tcp_sk(sk);
+	struct inet_peer *peer;
+	bool release_it;
+
+	peer = icsk->icsk_af_ops->get_peer(sk, &release_it);
+	if (peer) {
+		if ((s32)(peer->tcp_ts - tp->rx_opt.ts_recent) <= 0 ||
+		    ((u32)get_seconds() - peer->tcp_ts_stamp > TCP_PAWS_MSL &&
+		     peer->tcp_ts_stamp <= (u32)tp->rx_opt.ts_recent_stamp)) {
+			peer->tcp_ts_stamp = (u32)tp->rx_opt.ts_recent_stamp;
+			peer->tcp_ts = tp->rx_opt.ts_recent;
+		}
+		if (release_it)
+			inet_putpeer(peer);
+		return 1;
+	}
+
+	return 0;
+}
+
+static int tcp_tw_remember_stamp(struct inet_timewait_sock *tw)
+{
+	struct sock *sk = (struct sock *) tw;
+	struct inet_peer *peer;
+
+	peer = twsk_getpeer(sk);
+	if (peer) {
+		const struct tcp_timewait_sock *tcptw = tcp_twsk(sk);
+
+		if ((s32)(peer->tcp_ts - tcptw->tw_ts_recent) <= 0 ||
+		    ((u32)get_seconds() - peer->tcp_ts_stamp > TCP_PAWS_MSL &&
+		     peer->tcp_ts_stamp <= (u32)tcptw->tw_ts_recent_stamp)) {
+			peer->tcp_ts_stamp = (u32)tcptw->tw_ts_recent_stamp;
+			peer->tcp_ts	   = tcptw->tw_ts_recent;
+		}
+		inet_putpeer(peer);
+		return 1;
+	}
+	return 0;
+}
+
 static __inline__ int tcp_in_window(u32 seq, u32 end_seq, u32 s_win, u32 e_win)
 {
 	if (seq == s_win)
@@ -149,14 +199,9 @@ kill_with_rst:
 			tcptw->tw_ts_recent	  = tmp_opt.rcv_tsval;
 		}
 
-		/* I am shamed, but failed to make it more elegant.
-		 * Yes, it is direct reference to IP, which is impossible
-		 * to generalize to IPv6. Taking into account that IPv6
-		 * do not understand recycling in any case, it not
-		 * a big problem in practice. --ANK */
-		if (tw->tw_family == AF_INET &&
-		    tcp_death_row.sysctl_tw_recycle && tcptw->tw_ts_recent_stamp &&
-		    tcp_v4_tw_remember_stamp(tw))
+		if (tcp_death_row.sysctl_tw_recycle &&
+		    tcptw->tw_ts_recent_stamp &&
+		    tcp_tw_remember_stamp(tw))
 			inet_twsk_schedule(tw, &tcp_death_row, tw->tw_timeout,
 					   TCP_TIMEWAIT_LEN);
 		else
@@ -274,7 +319,7 @@ void tcp_time_wait(struct sock *sk, int state, int timeo)
 	int recycle_ok = 0;
 
 	if (tcp_death_row.sysctl_tw_recycle && tp->rx_opt.ts_recent_stamp)
-		recycle_ok = icsk->icsk_af_ops->remember_stamp(sk);
+		recycle_ok = tcp_remember_stamp(sk);
 
 	if (tcp_death_row.tw_count < tcp_death_row.sysctl_max_tw_buckets)
 		tw = inet_twsk_alloc(sk, state);
@@ -347,7 +392,7 @@ void tcp_time_wait(struct sock *sk, int state, int timeo)
 		 * socket up.  We've got bigger problems than
 		 * non-graceful socket closings.
 		 */
-		LIMIT_NETDEBUG(KERN_INFO "TCP: time wait bucket table overflow\n");
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPTIMEWAITOVERFLOW);
 	}
 
 	tcp_update_metrics(sk);
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 05b1ecf3676..dc7c096ddfe 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -55,7 +55,7 @@ int sysctl_tcp_workaround_signed_windows __read_mostly = 0;
 int sysctl_tcp_tso_win_divisor __read_mostly = 3;
 
 int sysctl_tcp_mtu_probing __read_mostly = 0;
-int sysctl_tcp_base_mss __read_mostly = 512;
+int sysctl_tcp_base_mss __read_mostly = TCP_BASE_MSS;
 
 /* By default, RFC2861 behavior.  */
 int sysctl_tcp_slow_start_after_idle __read_mostly = 1;
@@ -119,9 +119,13 @@ static __u16 tcp_advertise_mss(struct sock *sk)
 	struct dst_entry *dst = __sk_dst_get(sk);
 	int mss = tp->advmss;
 
-	if (dst && dst_metric(dst, RTAX_ADVMSS) < mss) {
-		mss = dst_metric(dst, RTAX_ADVMSS);
-		tp->advmss = mss;
+	if (dst) {
+		unsigned int metric = dst_metric_advmss(dst);
+
+		if (metric < mss) {
+			mss = metric;
+			tp->advmss = mss;
+		}
 	}
 
 	return (__u16)mss;
@@ -224,18 +228,22 @@ void tcp_select_initial_window(int __space, __u32 mss,
 		}
 	}
 
-	/* Set initial window to value enough for senders, following RFC5681. */
+	/* Set initial window to a value enough for senders starting with
+	 * initial congestion window of TCP_DEFAULT_INIT_RCVWND. Place
+	 * a limit on the initial window when mss is larger than 1460.
+	 */
 	if (mss > (1 << *rcv_wscale)) {
-		int init_cwnd = rfc3390_bytes_to_packets(mss);
-
+		int init_cwnd = TCP_DEFAULT_INIT_RCVWND;
+		if (mss > 1460)
+			init_cwnd =
+			max_t(u32, (1460 * TCP_DEFAULT_INIT_RCVWND) / mss, 2);
 		/* when initializing use the value from init_rcv_wnd
 		 * rather than the default from above
 		 */
-		if (init_rcv_wnd &&
-		    (*rcv_wnd > init_rcv_wnd * mss))
-			*rcv_wnd = init_rcv_wnd * mss;
-		else if (*rcv_wnd > init_cwnd * mss)
-			*rcv_wnd = init_cwnd * mss;
+		if (init_rcv_wnd)
+			*rcv_wnd = min(*rcv_wnd, init_rcv_wnd * mss);
+		else
+			*rcv_wnd = min(*rcv_wnd, init_cwnd * mss);
 	}
 
 	/* Set the clamp no higher than max representable value */
@@ -386,27 +394,30 @@ struct tcp_out_options {
  */
 static u8 tcp_cookie_size_check(u8 desired)
 {
-	if (desired > 0) {
+	int cookie_size;
+
+	if (desired > 0)
 		/* previously specified */
 		return desired;
-	}
-	if (sysctl_tcp_cookie_size <= 0) {
+
+	cookie_size = ACCESS_ONCE(sysctl_tcp_cookie_size);
+	if (cookie_size <= 0)
 		/* no default specified */
 		return 0;
-	}
-	if (sysctl_tcp_cookie_size <= TCP_COOKIE_MIN) {
+
+	if (cookie_size <= TCP_COOKIE_MIN)
 		/* value too small, specify minimum */
 		return TCP_COOKIE_MIN;
-	}
-	if (sysctl_tcp_cookie_size >= TCP_COOKIE_MAX) {
+
+	if (cookie_size >= TCP_COOKIE_MAX)
 		/* value too large, specify maximum */
 		return TCP_COOKIE_MAX;
-	}
-	if (0x1 & sysctl_tcp_cookie_size) {
+
+	if (cookie_size & 1)
 		/* 8-bit multiple, illegal, fix it */
-		return (u8)(sysctl_tcp_cookie_size + 0x1);
-	}
-	return (u8)sysctl_tcp_cookie_size;
+		cookie_size++;
+
+	return (u8)cookie_size;
 }
 
 /* Write previously computed TCP options to the packet.
@@ -822,8 +833,11 @@ static int tcp_transmit_skb(struct sock *sk, struct sk_buff *skb, int clone_it,
 							   &md5);
 	tcp_header_size = tcp_options_size + sizeof(struct tcphdr);
 
-	if (tcp_packets_in_flight(tp) == 0)
+	if (tcp_packets_in_flight(tp) == 0) {
 		tcp_ca_event(sk, CA_EVENT_TX_START);
+		skb->ooo_okay = 1;
+	} else
+		skb->ooo_okay = 0;
 
 	skb_push(skb, tcp_header_size);
 	skb_reset_transport_header(skb);
@@ -1513,6 +1527,7 @@ static int tcp_tso_should_defer(struct sock *sk, struct sk_buff *skb)
 	struct tcp_sock *tp = tcp_sk(sk);
 	const struct inet_connection_sock *icsk = inet_csk(sk);
 	u32 send_win, cong_win, limit, in_flight;
+	int win_divisor;
 
 	if (TCP_SKB_CB(skb)->flags & TCPHDR_FIN)
 		goto send_now;
@@ -1544,13 +1559,14 @@ static int tcp_tso_should_defer(struct sock *sk, struct sk_buff *skb)
 	if ((skb != tcp_write_queue_tail(sk)) && (limit >= skb->len))
 		goto send_now;
 
-	if (sysctl_tcp_tso_win_divisor) {
+	win_divisor = ACCESS_ONCE(sysctl_tcp_tso_win_divisor);
+	if (win_divisor) {
 		u32 chunk = min(tp->snd_wnd, tp->snd_cwnd * tp->mss_cache);
 
 		/* If at least some fraction of a window is available,
 		 * just use it.
 		 */
-		chunk /= sysctl_tcp_tso_win_divisor;
+		chunk /= win_divisor;
 		if (limit >= chunk)
 			goto send_now;
 	} else {
@@ -2415,7 +2431,7 @@ struct sk_buff *tcp_make_synack(struct sock *sk, struct dst_entry *dst,
 
 	skb_dst_set(skb, dst_clone(dst));
 
-	mss = dst_metric(dst, RTAX_ADVMSS);
+	mss = dst_metric_advmss(dst);
 	if (tp->rx_opt.user_mss && tp->rx_opt.user_mss < mss)
 		mss = tp->rx_opt.user_mss;
 
@@ -2549,7 +2565,7 @@ static void tcp_connect_init(struct sock *sk)
 
 	if (!tp->window_clamp)
 		tp->window_clamp = dst_metric(dst, RTAX_WINDOW);
-	tp->advmss = dst_metric(dst, RTAX_ADVMSS);
+	tp->advmss = dst_metric_advmss(dst);
 	if (tp->rx_opt.user_mss && tp->rx_opt.user_mss < tp->advmss)
 		tp->advmss = tp->rx_opt.user_mss;
 
@@ -2592,6 +2608,7 @@ int tcp_connect(struct sock *sk)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct sk_buff *buff;
+	int err;
 
 	tcp_connect_init(sk);
 
@@ -2614,7 +2631,9 @@ int tcp_connect(struct sock *sk)
 	sk->sk_wmem_queued += buff->truesize;
 	sk_mem_charge(sk, buff->truesize);
 	tp->packets_out += tcp_skb_pcount(buff);
-	tcp_transmit_skb(sk, buff, 1, sk->sk_allocation);
+	err = tcp_transmit_skb(sk, buff, 1, sk->sk_allocation);
+	if (err == -ECONNREFUSED)
+		return err;
 
 	/* We change tp->snd_nxt after the tcp_transmit_skb() call
 	 * in order to make this packet get counted in tcpOutSegs.
diff --git a/net/ipv4/tcp_probe.c b/net/ipv4/tcp_probe.c
index 6211e211417..85ee7eb7e38 100644
--- a/net/ipv4/tcp_probe.c
+++ b/net/ipv4/tcp_probe.c
@@ -154,7 +154,7 @@ static int tcpprobe_sprint(char *tbuf, int n)
 	struct timespec tv
 		= ktime_to_timespec(ktime_sub(p->tstamp, tcp_probe.start));
 
-	return snprintf(tbuf, n,
+	return scnprintf(tbuf, n,
 			"%lu.%09lu %pI4:%u %pI4:%u %d %#x %#x %u %u %u %u\n",
 			(unsigned long) tv.tv_sec,
 			(unsigned long) tv.tv_nsec,
@@ -174,7 +174,7 @@ static ssize_t tcpprobe_read(struct file *file, char __user *buf,
 		return -EINVAL;
 
 	while (cnt < len) {
-		char tbuf[128];
+		char tbuf[164];
 		int width;
 
 		/* Wait for data in buffer */
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 28cb2d733a3..8157b17959e 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -110,7 +110,7 @@
 struct udp_table udp_table __read_mostly;
 EXPORT_SYMBOL(udp_table);
 
-int sysctl_udp_mem[3] __read_mostly;
+long sysctl_udp_mem[3] __read_mostly;
 EXPORT_SYMBOL(sysctl_udp_mem);
 
 int sysctl_udp_rmem_min __read_mostly;
@@ -119,7 +119,7 @@ EXPORT_SYMBOL(sysctl_udp_rmem_min);
 int sysctl_udp_wmem_min __read_mostly;
 EXPORT_SYMBOL(sysctl_udp_wmem_min);
 
-atomic_t udp_memory_allocated;
+atomic_long_t udp_memory_allocated;
 EXPORT_SYMBOL(udp_memory_allocated);
 
 #define MAX_UDP_PORTS 65536
@@ -430,7 +430,7 @@ begin:
 
 	if (result) {
 exact_match:
-		if (unlikely(!atomic_inc_not_zero(&result->sk_refcnt)))
+		if (unlikely(!atomic_inc_not_zero_hint(&result->sk_refcnt, 2)))
 			result = NULL;
 		else if (unlikely(compute_score2(result, net, saddr, sport,
 				  daddr, hnum, dif) < badness)) {
@@ -500,7 +500,7 @@ begin:
 		goto begin;
 
 	if (result) {
-		if (unlikely(!atomic_inc_not_zero(&result->sk_refcnt)))
+		if (unlikely(!atomic_inc_not_zero_hint(&result->sk_refcnt, 2)))
 			result = NULL;
 		else if (unlikely(compute_score(result, net, saddr, hnum, sport,
 				  daddr, dport, dif) < badness)) {
@@ -890,15 +890,13 @@ int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
 	if (rt == NULL) {
 		struct flowi fl = { .oif = ipc.oif,
 				    .mark = sk->sk_mark,
-				    .nl_u = { .ip4_u =
-					      { .daddr = faddr,
-						.saddr = saddr,
-						.tos = tos } },
+				    .fl4_dst = faddr,
+				    .fl4_src = saddr,
+				    .fl4_tos = tos,
 				    .proto = sk->sk_protocol,
 				    .flags = inet_sk_flowi_flags(sk),
-				    .uli_u = { .ports =
-					       { .sport = inet->inet_sport,
-						 .dport = dport } } };
+				    .fl_ip_sport = inet->inet_sport,
+				    .fl_ip_dport = dport };
 		struct net *net = sock_net(sk);
 
 		security_sk_classify_flow(sk, &fl);
@@ -1899,6 +1897,7 @@ struct proto udp_prot = {
 	.compat_setsockopt = compat_udp_setsockopt,
 	.compat_getsockopt = compat_udp_getsockopt,
 #endif
+	.clear_sk	   = sk_prot_clear_portaddr_nulls,
 };
 EXPORT_SYMBOL(udp_prot);
 
@@ -2228,7 +2227,7 @@ struct sk_buff *udp4_ufo_fragment(struct sk_buff *skb, int features)
 	/* Do software UFO. Complete and fill in the UDP checksum as HW cannot
 	 * do checksum of UDP packets sent as multiple IP fragments.
 	 */
-	offset = skb->csum_start - skb_headroom(skb);
+	offset = skb_checksum_start_offset(skb);
 	csum = skb_checksum(skb, offset, skb->len - offset, 0);
 	offset += skb->csum_offset;
 	*(__sum16 *)(skb->data + offset) = csum_fold(csum);
diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c
index ab76aa928fa..aee9963f7f5 100644
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -57,6 +57,7 @@ struct proto 	udplite_prot = {
 	.compat_setsockopt = compat_udp_setsockopt,
 	.compat_getsockopt = compat_udp_getsockopt,
 #endif
+	.clear_sk	   = sk_prot_clear_portaddr_nulls,
 };
 EXPORT_SYMBOL(udplite_prot);
 
diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c
index 6f368413eb0..534972e114a 100644
--- a/net/ipv4/xfrm4_mode_tunnel.c
+++ b/net/ipv4/xfrm4_mode_tunnel.c
@@ -56,7 +56,7 @@ static int xfrm4_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 		0 : (XFRM_MODE_SKB_CB(skb)->frag_off & htons(IP_DF));
 	ip_select_ident(top_iph, dst->child, NULL);
 
-	top_iph->ttl = dst_metric(dst->child, RTAX_HOPLIMIT);
+	top_iph->ttl = ip4_dst_hoplimit(dst->child);
 
 	top_iph->saddr = x->props.saddr.a4;
 	top_iph->daddr = x->id.daddr.a4;
diff --git a/net/ipv4/xfrm4_policy.c b/net/ipv4/xfrm4_policy.c
index dd1fd8c473f..b057d40adde 100644
--- a/net/ipv4/xfrm4_policy.c
+++ b/net/ipv4/xfrm4_policy.c
@@ -11,6 +11,7 @@
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/inetdevice.h>
+#include <linux/if_tunnel.h>
 #include <net/dst.h>
 #include <net/xfrm.h>
 #include <net/ip.h>
@@ -22,12 +23,8 @@ static struct dst_entry *xfrm4_dst_lookup(struct net *net, int tos,
 					  xfrm_address_t *daddr)
 {
 	struct flowi fl = {
-		.nl_u = {
-			.ip4_u = {
-				.tos = tos,
-				.daddr = daddr->a4,
-			},
-		},
+		.fl4_dst = daddr->a4,
+		.fl4_tos = tos,
 	};
 	struct dst_entry *dst;
 	struct rtable *rt;
@@ -154,6 +151,20 @@ _decode_session4(struct sk_buff *skb, struct flowi *fl, int reverse)
 				fl->fl_ipsec_spi = htonl(ntohs(ipcomp_hdr[1]));
 			}
 			break;
+
+		case IPPROTO_GRE:
+			if (pskb_may_pull(skb, xprth + 12 - skb->data)) {
+				__be16 *greflags = (__be16 *)xprth;
+				__be32 *gre_hdr = (__be32 *)xprth;
+
+				if (greflags[0] & GRE_KEY) {
+					if (greflags[0] & GRE_CSUM)
+						gre_hdr++;
+					fl->fl_gre_key = gre_hdr[1];
+				}
+			}
+			break;
+
 		default:
 			fl->fl_ipsec_spi = 0;
 			break;
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e048ec62d10..5b189c97c2f 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -98,7 +98,11 @@
 #endif
 
 #define	INFINITY_LIFE_TIME	0xFFFFFFFF
-#define TIME_DELTA(a, b) ((unsigned long)((long)(a) - (long)(b)))
+
+static inline u32 cstamp_delta(unsigned long cstamp)
+{
+	return (cstamp - INITIAL_JIFFIES) * 100UL / HZ;
+}
 
 #define ADDRCONF_TIMER_FUZZ_MINUS	(HZ > 50 ? HZ/50 : 1)
 #define ADDRCONF_TIMER_FUZZ		(HZ / 4)
@@ -2665,8 +2669,9 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 
 	ASSERT_RTNL();
 
-	rt6_ifdown(net, dev);
-	neigh_ifdown(&nd_tbl, dev);
+	/* Flush routes if device is being removed or it is not loopback */
+	if (how || !(dev->flags & IFF_LOOPBACK))
+		rt6_ifdown(net, dev);
 
 	idev = __in6_dev_get(dev);
 	if (idev == NULL)
@@ -2740,10 +2745,6 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 			/* Flag it for later restoration when link comes up */
 			ifa->flags |= IFA_F_TENTATIVE;
 			ifa->state = INET6_IFADDR_STATE_DAD;
-
-			write_unlock_bh(&idev->lock);
-
-			in6_ifa_hold(ifa);
 		} else {
 			list_del(&ifa->if_list);
 
@@ -2758,19 +2759,15 @@ static int addrconf_ifdown(struct net_device *dev, int how)
 			ifa->state = INET6_IFADDR_STATE_DEAD;
 			spin_unlock_bh(&ifa->state_lock);
 
-			if (state == INET6_IFADDR_STATE_DEAD)
-				goto put_ifa;
-		}
-
-		__ipv6_ifa_notify(RTM_DELADDR, ifa);
-		if (ifa->state == INET6_IFADDR_STATE_DEAD)
-			atomic_notifier_call_chain(&inet6addr_chain,
-						   NETDEV_DOWN, ifa);
-
-put_ifa:
-		in6_ifa_put(ifa);
+			if (state != INET6_IFADDR_STATE_DEAD) {
+				__ipv6_ifa_notify(RTM_DELADDR, ifa);
+				atomic_notifier_call_chain(&inet6addr_chain,
+							   NETDEV_DOWN, ifa);
+			}
 
-		write_lock_bh(&idev->lock);
+			in6_ifa_put(ifa);
+			write_lock_bh(&idev->lock);
+		}
 	}
 
 	list_splice(&keep_list, &idev->addr_list);
@@ -3452,10 +3449,8 @@ static int put_cacheinfo(struct sk_buff *skb, unsigned long cstamp,
 {
 	struct ifa_cacheinfo ci;
 
-	ci.cstamp = (u32)(TIME_DELTA(cstamp, INITIAL_JIFFIES) / HZ * 100
-			+ TIME_DELTA(cstamp, INITIAL_JIFFIES) % HZ * 100 / HZ);
-	ci.tstamp = (u32)(TIME_DELTA(tstamp, INITIAL_JIFFIES) / HZ * 100
-			+ TIME_DELTA(tstamp, INITIAL_JIFFIES) % HZ * 100 / HZ);
+	ci.cstamp = cstamp_delta(cstamp);
+	ci.tstamp = cstamp_delta(tstamp);
 	ci.ifa_prefered = preferred;
 	ci.ifa_valid = valid;
 
@@ -3806,8 +3801,10 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
 	array[DEVCONF_AUTOCONF] = cnf->autoconf;
 	array[DEVCONF_DAD_TRANSMITS] = cnf->dad_transmits;
 	array[DEVCONF_RTR_SOLICITS] = cnf->rtr_solicits;
-	array[DEVCONF_RTR_SOLICIT_INTERVAL] = cnf->rtr_solicit_interval;
-	array[DEVCONF_RTR_SOLICIT_DELAY] = cnf->rtr_solicit_delay;
+	array[DEVCONF_RTR_SOLICIT_INTERVAL] =
+		jiffies_to_msecs(cnf->rtr_solicit_interval);
+	array[DEVCONF_RTR_SOLICIT_DELAY] =
+		jiffies_to_msecs(cnf->rtr_solicit_delay);
 	array[DEVCONF_FORCE_MLD_VERSION] = cnf->force_mld_version;
 #ifdef CONFIG_IPV6_PRIVACY
 	array[DEVCONF_USE_TEMPADDR] = cnf->use_tempaddr;
@@ -3821,7 +3818,8 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
 	array[DEVCONF_ACCEPT_RA_PINFO] = cnf->accept_ra_pinfo;
 #ifdef CONFIG_IPV6_ROUTER_PREF
 	array[DEVCONF_ACCEPT_RA_RTR_PREF] = cnf->accept_ra_rtr_pref;
-	array[DEVCONF_RTR_PROBE_INTERVAL] = cnf->rtr_probe_interval;
+	array[DEVCONF_RTR_PROBE_INTERVAL] =
+		jiffies_to_msecs(cnf->rtr_probe_interval);
 #ifdef CONFIG_IPV6_ROUTE_INFO
 	array[DEVCONF_ACCEPT_RA_RT_INFO_MAX_PLEN] = cnf->accept_ra_rt_info_max_plen;
 #endif
@@ -3839,6 +3837,15 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
 	array[DEVCONF_FORCE_TLLAO] = cnf->force_tllao;
 }
 
+static inline size_t inet6_ifla6_size(void)
+{
+	return nla_total_size(4) /* IFLA_INET6_FLAGS */
+	     + nla_total_size(sizeof(struct ifla_cacheinfo))
+	     + nla_total_size(DEVCONF_MAX * 4) /* IFLA_INET6_CONF */
+	     + nla_total_size(IPSTATS_MIB_MAX * 8) /* IFLA_INET6_STATS */
+	     + nla_total_size(ICMP6_MIB_MAX * 8); /* IFLA_INET6_ICMP6STATS */
+}
+
 static inline size_t inet6_if_nlmsg_size(void)
 {
 	return NLMSG_ALIGN(sizeof(struct ifinfomsg))
@@ -3846,13 +3853,7 @@ static inline size_t inet6_if_nlmsg_size(void)
 	       + nla_total_size(MAX_ADDR_LEN) /* IFLA_ADDRESS */
 	       + nla_total_size(4) /* IFLA_MTU */
 	       + nla_total_size(4) /* IFLA_LINK */
-	       + nla_total_size( /* IFLA_PROTINFO */
-			nla_total_size(4) /* IFLA_INET6_FLAGS */
-			+ nla_total_size(sizeof(struct ifla_cacheinfo))
-			+ nla_total_size(DEVCONF_MAX * 4) /* IFLA_INET6_CONF */
-			+ nla_total_size(IPSTATS_MIB_MAX * 8) /* IFLA_INET6_STATS */
-			+ nla_total_size(ICMP6_MIB_MAX * 8) /* IFLA_INET6_ICMP6STATS */
-		 );
+	       + nla_total_size(inet6_ifla6_size()); /* IFLA_PROTINFO */
 }
 
 static inline void __snmp6_fill_stats(u64 *stats, void __percpu **mib,
@@ -3899,15 +3900,70 @@ static void snmp6_fill_stats(u64 *stats, struct inet6_dev *idev, int attrtype,
 	}
 }
 
+static int inet6_fill_ifla6_attrs(struct sk_buff *skb, struct inet6_dev *idev)
+{
+	struct nlattr *nla;
+	struct ifla_cacheinfo ci;
+
+	NLA_PUT_U32(skb, IFLA_INET6_FLAGS, idev->if_flags);
+
+	ci.max_reasm_len = IPV6_MAXPLEN;
+	ci.tstamp = cstamp_delta(idev->tstamp);
+	ci.reachable_time = jiffies_to_msecs(idev->nd_parms->reachable_time);
+	ci.retrans_time = jiffies_to_msecs(idev->nd_parms->retrans_time);
+	NLA_PUT(skb, IFLA_INET6_CACHEINFO, sizeof(ci), &ci);
+
+	nla = nla_reserve(skb, IFLA_INET6_CONF, DEVCONF_MAX * sizeof(s32));
+	if (nla == NULL)
+		goto nla_put_failure;
+	ipv6_store_devconf(&idev->cnf, nla_data(nla), nla_len(nla));
+
+	/* XXX - MC not implemented */
+
+	nla = nla_reserve(skb, IFLA_INET6_STATS, IPSTATS_MIB_MAX * sizeof(u64));
+	if (nla == NULL)
+		goto nla_put_failure;
+	snmp6_fill_stats(nla_data(nla), idev, IFLA_INET6_STATS, nla_len(nla));
+
+	nla = nla_reserve(skb, IFLA_INET6_ICMP6STATS, ICMP6_MIB_MAX * sizeof(u64));
+	if (nla == NULL)
+		goto nla_put_failure;
+	snmp6_fill_stats(nla_data(nla), idev, IFLA_INET6_ICMP6STATS, nla_len(nla));
+
+	return 0;
+
+nla_put_failure:
+	return -EMSGSIZE;
+}
+
+static size_t inet6_get_link_af_size(const struct net_device *dev)
+{
+	if (!__in6_dev_get(dev))
+		return 0;
+
+	return inet6_ifla6_size();
+}
+
+static int inet6_fill_link_af(struct sk_buff *skb, const struct net_device *dev)
+{
+	struct inet6_dev *idev = __in6_dev_get(dev);
+
+	if (!idev)
+		return -ENODATA;
+
+	if (inet6_fill_ifla6_attrs(skb, idev) < 0)
+		return -EMSGSIZE;
+
+	return 0;
+}
+
 static int inet6_fill_ifinfo(struct sk_buff *skb, struct inet6_dev *idev,
 			     u32 pid, u32 seq, int event, unsigned int flags)
 {
 	struct net_device *dev = idev->dev;
-	struct nlattr *nla;
 	struct ifinfomsg *hdr;
 	struct nlmsghdr *nlh;
 	void *protoinfo;
-	struct ifla_cacheinfo ci;
 
 	nlh = nlmsg_put(skb, pid, seq, event, sizeof(*hdr), flags);
 	if (nlh == NULL)
@@ -3934,31 +3990,8 @@ static int inet6_fill_ifinfo(struct sk_buff *skb, struct inet6_dev *idev,
 	if (protoinfo == NULL)
 		goto nla_put_failure;
 
-	NLA_PUT_U32(skb, IFLA_INET6_FLAGS, idev->if_flags);
-
-	ci.max_reasm_len = IPV6_MAXPLEN;
-	ci.tstamp = (__u32)(TIME_DELTA(idev->tstamp, INITIAL_JIFFIES) / HZ * 100
-		    + TIME_DELTA(idev->tstamp, INITIAL_JIFFIES) % HZ * 100 / HZ);
-	ci.reachable_time = idev->nd_parms->reachable_time;
-	ci.retrans_time = idev->nd_parms->retrans_time;
-	NLA_PUT(skb, IFLA_INET6_CACHEINFO, sizeof(ci), &ci);
-
-	nla = nla_reserve(skb, IFLA_INET6_CONF, DEVCONF_MAX * sizeof(s32));
-	if (nla == NULL)
-		goto nla_put_failure;
-	ipv6_store_devconf(&idev->cnf, nla_data(nla), nla_len(nla));
-
-	/* XXX - MC not implemented */
-
-	nla = nla_reserve(skb, IFLA_INET6_STATS, IPSTATS_MIB_MAX * sizeof(u64));
-	if (nla == NULL)
+	if (inet6_fill_ifla6_attrs(skb, idev) < 0)
 		goto nla_put_failure;
-	snmp6_fill_stats(nla_data(nla), idev, IFLA_INET6_STATS, nla_len(nla));
-
-	nla = nla_reserve(skb, IFLA_INET6_ICMP6STATS, ICMP6_MIB_MAX * sizeof(u64));
-	if (nla == NULL)
-		goto nla_put_failure;
-	snmp6_fill_stats(nla_data(nla), idev, IFLA_INET6_ICMP6STATS, nla_len(nla));
 
 	nla_nest_end(skb, protoinfo);
 	return nlmsg_end(skb, nlh);
@@ -4025,11 +4058,11 @@ void inet6_ifinfo_notify(int event, struct inet6_dev *idev)
 		kfree_skb(skb);
 		goto errout;
 	}
-	rtnl_notify(skb, net, 0, RTNLGRP_IPV6_IFADDR, NULL, GFP_ATOMIC);
+	rtnl_notify(skb, net, 0, RTNLGRP_IPV6_IFINFO, NULL, GFP_ATOMIC);
 	return;
 errout:
 	if (err < 0)
-		rtnl_set_sk_err(net, RTNLGRP_IPV6_IFADDR, err);
+		rtnl_set_sk_err(net, RTNLGRP_IPV6_IFINFO, err);
 }
 
 static inline size_t inet6_prefix_nlmsg_size(void)
@@ -4629,6 +4662,12 @@ int unregister_inet6addr_notifier(struct notifier_block *nb)
 }
 EXPORT_SYMBOL(unregister_inet6addr_notifier);
 
+static struct rtnl_af_ops inet6_ops = {
+	.family		  = AF_INET6,
+	.fill_link_af	  = inet6_fill_link_af,
+	.get_link_af_size = inet6_get_link_af_size,
+};
+
 /*
  *	Init / cleanup code
  */
@@ -4680,6 +4719,10 @@ int __init addrconf_init(void)
 
 	addrconf_verify(0);
 
+	err = rtnl_af_register(&inet6_ops);
+	if (err < 0)
+		goto errout_af;
+
 	err = __rtnl_register(PF_INET6, RTM_GETLINK, NULL, inet6_dump_ifinfo);
 	if (err < 0)
 		goto errout;
@@ -4695,6 +4738,8 @@ int __init addrconf_init(void)
 
 	return 0;
 errout:
+	rtnl_af_unregister(&inet6_ops);
+errout_af:
 	unregister_netdevice_notifier(&ipv6_dev_notf);
 errlo:
 	unregister_pernet_subsys(&addrconf_ops);
@@ -4715,6 +4760,8 @@ void addrconf_cleanup(void)
 
 	rtnl_lock();
 
+	__rtnl_af_unregister(&inet6_ops);
+
 	/* clean dev list */
 	for_each_netdev(&init_net, dev) {
 		if (__in6_dev_get(dev) == NULL)
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 54e8e42f7a8..059a3de647d 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -810,7 +810,7 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb, int features)
 	}
 	rcu_read_unlock();
 
-	if (unlikely(IS_ERR(segs)))
+	if (IS_ERR(segs))
 		goto out;
 
 	for (skb = segs; skb; skb = skb->next) {
diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index ee9b93bdd6a..1b5c9825743 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -49,6 +49,8 @@ struct esp_skb_cb {
 
 #define ESP_SKB_CB(__skb) ((struct esp_skb_cb *)&((__skb)->cb[0]))
 
+static u32 esp6_get_mtu(struct xfrm_state *x, int mtu);
+
 /*
  * Allocate an AEAD request structure with extra space for SG and IV.
  *
@@ -140,6 +142,8 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb)
 	int blksize;
 	int clen;
 	int alen;
+	int plen;
+	int tfclen;
 	int nfrags;
 	u8 *iv;
 	u8 *tail;
@@ -148,18 +152,26 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb)
 	/* skb is pure payload to encrypt */
 	err = -ENOMEM;
 
-	/* Round to block size */
-	clen = skb->len;
-
 	aead = esp->aead;
 	alen = crypto_aead_authsize(aead);
 
+	tfclen = 0;
+	if (x->tfcpad) {
+		struct xfrm_dst *dst = (struct xfrm_dst *)skb_dst(skb);
+		u32 padto;
+
+		padto = min(x->tfcpad, esp6_get_mtu(x, dst->child_mtu_cached));
+		if (skb->len < padto)
+			tfclen = padto - skb->len;
+	}
 	blksize = ALIGN(crypto_aead_blocksize(aead), 4);
-	clen = ALIGN(clen + 2, blksize);
+	clen = ALIGN(skb->len + 2 + tfclen, blksize);
 	if (esp->padlen)
 		clen = ALIGN(clen, esp->padlen);
+	plen = clen - skb->len - tfclen;
 
-	if ((err = skb_cow_data(skb, clen - skb->len + alen, &trailer)) < 0)
+	err = skb_cow_data(skb, tfclen + plen + alen, &trailer);
+	if (err < 0)
 		goto error;
 	nfrags = err;
 
@@ -174,13 +186,17 @@ static int esp6_output(struct xfrm_state *x, struct sk_buff *skb)
 
 	/* Fill padding... */
 	tail = skb_tail_pointer(trailer);
+	if (tfclen) {
+		memset(tail, 0, tfclen);
+		tail += tfclen;
+	}
 	do {
 		int i;
-		for (i=0; i<clen-skb->len - 2; i++)
+		for (i = 0; i < plen - 2; i++)
 			tail[i] = i + 1;
 	} while (0);
-	tail[clen-skb->len - 2] = (clen - skb->len) - 2;
-	tail[clen - skb->len - 1] = *skb_mac_header(skb);
+	tail[plen - 2] = plen - 2;
+	tail[plen - 1] = *skb_mac_header(skb);
 	pskb_put(skb, trailer, clen - skb->len + alen);
 
 	skb_push(skb, -skb_network_offset(skb));
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index 8a1628023bd..e46305d1815 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -54,24 +54,54 @@ int inet6_csk_bind_conflict(const struct sock *sk,
 
 EXPORT_SYMBOL_GPL(inet6_csk_bind_conflict);
 
+struct dst_entry *inet6_csk_route_req(struct sock *sk,
+				      const struct request_sock *req)
+{
+	struct inet6_request_sock *treq = inet6_rsk(req);
+	struct ipv6_pinfo *np = inet6_sk(sk);
+	struct in6_addr *final_p, final;
+	struct dst_entry *dst;
+	struct flowi fl;
+
+	memset(&fl, 0, sizeof(fl));
+	fl.proto = IPPROTO_TCP;
+	ipv6_addr_copy(&fl.fl6_dst, &treq->rmt_addr);
+	final_p = fl6_update_dst(&fl, np->opt, &final);
+	ipv6_addr_copy(&fl.fl6_src, &treq->loc_addr);
+	fl.oif = sk->sk_bound_dev_if;
+	fl.mark = sk->sk_mark;
+	fl.fl_ip_dport = inet_rsk(req)->rmt_port;
+	fl.fl_ip_sport = inet_rsk(req)->loc_port;
+	security_req_classify_flow(req, &fl);
+
+	if (ip6_dst_lookup(sk, &dst, &fl))
+		return NULL;
+
+	if (final_p)
+		ipv6_addr_copy(&fl.fl6_dst, final_p);
+
+	if ((xfrm_lookup(sock_net(sk), &dst, &fl, sk, 0)) < 0)
+		return NULL;
+
+	return dst;
+}
+
 /*
  * request_sock (formerly open request) hash tables.
  */
 static u32 inet6_synq_hash(const struct in6_addr *raddr, const __be16 rport,
 			   const u32 rnd, const u16 synq_hsize)
 {
-	u32 a = (__force u32)raddr->s6_addr32[0];
-	u32 b = (__force u32)raddr->s6_addr32[1];
-	u32 c = (__force u32)raddr->s6_addr32[2];
-
-	a += JHASH_GOLDEN_RATIO;
-	b += JHASH_GOLDEN_RATIO;
-	c += rnd;
-	__jhash_mix(a, b, c);
-
-	a += (__force u32)raddr->s6_addr32[3];
-	b += (__force u32)rport;
-	__jhash_mix(a, b, c);
+	u32 c;
+
+	c = jhash_3words((__force u32)raddr->s6_addr32[0],
+			 (__force u32)raddr->s6_addr32[1],
+			 (__force u32)raddr->s6_addr32[2],
+			 rnd);
+
+	c = jhash_2words((__force u32)raddr->s6_addr32[3],
+			 (__force u32)rport,
+			 c);
 
 	return c & (synq_hsize - 1);
 }
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 99157b4cd56..94b5bf132b2 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -56,7 +56,7 @@
 #include <net/checksum.h>
 #include <linux/mroute6.h>
 
-static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *));
+int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *));
 
 int __ip6_local_out(struct sk_buff *skb)
 {
@@ -145,14 +145,6 @@ static int ip6_finish_output2(struct sk_buff *skb)
 	return -EINVAL;
 }
 
-static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
-{
-	struct ipv6_pinfo *np = skb->sk ? inet6_sk(skb->sk) : NULL;
-
-	return (np && np->pmtudisc == IPV6_PMTUDISC_PROBE) ?
-	       skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
-}
-
 static int ip6_finish_output(struct sk_buff *skb)
 {
 	if ((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
@@ -601,7 +593,7 @@ int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
 	return offset;
 }
 
-static int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
+int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *))
 {
 	struct sk_buff *frag;
 	struct rt6_info *rt = (struct rt6_info*)skb_dst(skb);
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 2a59610c2a5..4f4483e697b 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -58,8 +58,6 @@ MODULE_AUTHOR("Ville Nuorvala");
 MODULE_DESCRIPTION("IPv6 tunneling device");
 MODULE_LICENSE("GPL");
 
-#define IPV6_TLV_TEL_DST_SIZE 8
-
 #ifdef IP6_TNL_DEBUG
 #define IP6_TNL_TRACE(x...) printk(KERN_DEBUG "%s:" x "\n", __func__)
 #else
@@ -1175,6 +1173,8 @@ static void ip6_tnl_link_config(struct ip6_tnl *t)
 				sizeof (struct ipv6hdr);
 
 			dev->mtu = rt->rt6i_dev->mtu - sizeof (struct ipv6hdr);
+			if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
+				dev->mtu-=8;
 
 			if (dev->mtu < IPV6_MIN_MTU)
 				dev->mtu = IPV6_MIN_MTU;
@@ -1363,12 +1363,17 @@ static const struct net_device_ops ip6_tnl_netdev_ops = {
 
 static void ip6_tnl_dev_setup(struct net_device *dev)
 {
+	struct ip6_tnl *t;
+
 	dev->netdev_ops = &ip6_tnl_netdev_ops;
 	dev->destructor = ip6_dev_free;
 
 	dev->type = ARPHRD_TUNNEL6;
 	dev->hard_header_len = LL_MAX_HEADER + sizeof (struct ipv6hdr);
 	dev->mtu = ETH_DATA_LEN - sizeof (struct ipv6hdr);
+	t = netdev_priv(dev);
+	if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
+		dev->mtu-=8;
 	dev->flags |= IFF_NOARP;
 	dev->addr_len = sizeof(struct in6_addr);
 	dev->features |= NETIF_F_NETNS_LOCAL;
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 6f32ffce702..9fab274019c 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -1843,9 +1843,7 @@ static int ip6mr_forward2(struct net *net, struct mr6_table *mrt,
 
 	fl = (struct flowi) {
 		.oif = vif->link,
-		.nl_u = { .ip6_u =
-				{ .daddr = ipv6h->daddr, }
-		}
+		.fl6_dst = ipv6h->daddr,
 	};
 
 	dst = ip6_route_output(net, NULL, &fl);
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index d1444b95ad7..49f986d626a 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -82,7 +82,7 @@ static void *__mld2_query_bugs[] __attribute__((__unused__)) = {
 static struct in6_addr mld2_all_mcr = MLD2_ALL_MCR_INIT;
 
 /* Big mc list lock for all the sockets */
-static DEFINE_RWLOCK(ipv6_sk_mc_lock);
+static DEFINE_SPINLOCK(ipv6_sk_mc_lock);
 
 static void igmp6_join_group(struct ifmcaddr6 *ma);
 static void igmp6_leave_group(struct ifmcaddr6 *ma);
@@ -123,6 +123,11 @@ int sysctl_mld_max_msf __read_mostly = IPV6_MLD_MAX_MSF;
  *	socket join on multicast group
  */
 
+#define for_each_pmc_rcu(np, pmc)				\
+	for (pmc = rcu_dereference(np->ipv6_mc_list);		\
+	     pmc != NULL;					\
+	     pmc = rcu_dereference(pmc->next))
+
 int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr)
 {
 	struct net_device *dev = NULL;
@@ -134,15 +139,15 @@ int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr)
 	if (!ipv6_addr_is_multicast(addr))
 		return -EINVAL;
 
-	read_lock_bh(&ipv6_sk_mc_lock);
-	for (mc_lst=np->ipv6_mc_list; mc_lst; mc_lst=mc_lst->next) {
+	rcu_read_lock();
+	for_each_pmc_rcu(np, mc_lst) {
 		if ((ifindex == 0 || mc_lst->ifindex == ifindex) &&
 		    ipv6_addr_equal(&mc_lst->addr, addr)) {
-			read_unlock_bh(&ipv6_sk_mc_lock);
+			rcu_read_unlock();
 			return -EADDRINUSE;
 		}
 	}
-	read_unlock_bh(&ipv6_sk_mc_lock);
+	rcu_read_unlock();
 
 	mc_lst = sock_kmalloc(sk, sizeof(struct ipv6_mc_socklist), GFP_KERNEL);
 
@@ -186,33 +191,41 @@ int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr)
 		return err;
 	}
 
-	write_lock_bh(&ipv6_sk_mc_lock);
+	spin_lock(&ipv6_sk_mc_lock);
 	mc_lst->next = np->ipv6_mc_list;
-	np->ipv6_mc_list = mc_lst;
-	write_unlock_bh(&ipv6_sk_mc_lock);
+	rcu_assign_pointer(np->ipv6_mc_list, mc_lst);
+	spin_unlock(&ipv6_sk_mc_lock);
 
 	rcu_read_unlock();
 
 	return 0;
 }
 
+static void ipv6_mc_socklist_reclaim(struct rcu_head *head)
+{
+	kfree(container_of(head, struct ipv6_mc_socklist, rcu));
+}
 /*
  *	socket leave on multicast group
  */
 int ipv6_sock_mc_drop(struct sock *sk, int ifindex, const struct in6_addr *addr)
 {
 	struct ipv6_pinfo *np = inet6_sk(sk);
-	struct ipv6_mc_socklist *mc_lst, **lnk;
+	struct ipv6_mc_socklist *mc_lst;
+	struct ipv6_mc_socklist __rcu **lnk;
 	struct net *net = sock_net(sk);
 
-	write_lock_bh(&ipv6_sk_mc_lock);
-	for (lnk = &np->ipv6_mc_list; (mc_lst = *lnk) !=NULL ; lnk = &mc_lst->next) {
+	spin_lock(&ipv6_sk_mc_lock);
+	for (lnk = &np->ipv6_mc_list;
+	     (mc_lst = rcu_dereference_protected(*lnk,
+			lockdep_is_held(&ipv6_sk_mc_lock))) !=NULL ;
+	      lnk = &mc_lst->next) {
 		if ((ifindex == 0 || mc_lst->ifindex == ifindex) &&
 		    ipv6_addr_equal(&mc_lst->addr, addr)) {
 			struct net_device *dev;
 
 			*lnk = mc_lst->next;
-			write_unlock_bh(&ipv6_sk_mc_lock);
+			spin_unlock(&ipv6_sk_mc_lock);
 
 			rcu_read_lock();
 			dev = dev_get_by_index_rcu(net, mc_lst->ifindex);
@@ -225,11 +238,12 @@ int ipv6_sock_mc_drop(struct sock *sk, int ifindex, const struct in6_addr *addr)
 			} else
 				(void) ip6_mc_leave_src(sk, mc_lst, NULL);
 			rcu_read_unlock();
-			sock_kfree_s(sk, mc_lst, sizeof(*mc_lst));
+			atomic_sub(sizeof(*mc_lst), &sk->sk_omem_alloc);
+			call_rcu(&mc_lst->rcu, ipv6_mc_socklist_reclaim);
 			return 0;
 		}
 	}
-	write_unlock_bh(&ipv6_sk_mc_lock);
+	spin_unlock(&ipv6_sk_mc_lock);
 
 	return -EADDRNOTAVAIL;
 }
@@ -257,7 +271,7 @@ static struct inet6_dev *ip6_mc_find_dev_rcu(struct net *net,
 		return NULL;
 	idev = __in6_dev_get(dev);
 	if (!idev)
-		return NULL;;
+		return NULL;
 	read_lock_bh(&idev->lock);
 	if (idev->dead) {
 		read_unlock_bh(&idev->lock);
@@ -272,12 +286,13 @@ void ipv6_sock_mc_close(struct sock *sk)
 	struct ipv6_mc_socklist *mc_lst;
 	struct net *net = sock_net(sk);
 
-	write_lock_bh(&ipv6_sk_mc_lock);
-	while ((mc_lst = np->ipv6_mc_list) != NULL) {
+	spin_lock(&ipv6_sk_mc_lock);
+	while ((mc_lst = rcu_dereference_protected(np->ipv6_mc_list,
+				lockdep_is_held(&ipv6_sk_mc_lock))) != NULL) {
 		struct net_device *dev;
 
 		np->ipv6_mc_list = mc_lst->next;
-		write_unlock_bh(&ipv6_sk_mc_lock);
+		spin_unlock(&ipv6_sk_mc_lock);
 
 		rcu_read_lock();
 		dev = dev_get_by_index_rcu(net, mc_lst->ifindex);
@@ -290,11 +305,13 @@ void ipv6_sock_mc_close(struct sock *sk)
 		} else
 			(void) ip6_mc_leave_src(sk, mc_lst, NULL);
 		rcu_read_unlock();
-		sock_kfree_s(sk, mc_lst, sizeof(*mc_lst));
 
-		write_lock_bh(&ipv6_sk_mc_lock);
+		atomic_sub(sizeof(*mc_lst), &sk->sk_omem_alloc);
+		call_rcu(&mc_lst->rcu, ipv6_mc_socklist_reclaim);
+
+		spin_lock(&ipv6_sk_mc_lock);
 	}
-	write_unlock_bh(&ipv6_sk_mc_lock);
+	spin_unlock(&ipv6_sk_mc_lock);
 }
 
 int ip6_mc_source(int add, int omode, struct sock *sk,
@@ -328,8 +345,7 @@ int ip6_mc_source(int add, int omode, struct sock *sk,
 
 	err = -EADDRNOTAVAIL;
 
-	read_lock(&ipv6_sk_mc_lock);
-	for (pmc=inet6->ipv6_mc_list; pmc; pmc=pmc->next) {
+	for_each_pmc_rcu(inet6, pmc) {
 		if (pgsr->gsr_interface && pmc->ifindex != pgsr->gsr_interface)
 			continue;
 		if (ipv6_addr_equal(&pmc->addr, group))
@@ -428,7 +444,6 @@ int ip6_mc_source(int add, int omode, struct sock *sk,
 done:
 	if (pmclocked)
 		write_unlock(&pmc->sflock);
-	read_unlock(&ipv6_sk_mc_lock);
 	read_unlock_bh(&idev->lock);
 	rcu_read_unlock();
 	if (leavegroup)
@@ -466,14 +481,13 @@ int ip6_mc_msfilter(struct sock *sk, struct group_filter *gsf)
 	dev = idev->dev;
 
 	err = 0;
-	read_lock(&ipv6_sk_mc_lock);
 
 	if (gsf->gf_fmode == MCAST_INCLUDE && gsf->gf_numsrc == 0) {
 		leavegroup = 1;
 		goto done;
 	}
 
-	for (pmc=inet6->ipv6_mc_list; pmc; pmc=pmc->next) {
+	for_each_pmc_rcu(inet6, pmc) {
 		if (pmc->ifindex != gsf->gf_interface)
 			continue;
 		if (ipv6_addr_equal(&pmc->addr, group))
@@ -521,7 +535,6 @@ int ip6_mc_msfilter(struct sock *sk, struct group_filter *gsf)
 	write_unlock(&pmc->sflock);
 	err = 0;
 done:
-	read_unlock(&ipv6_sk_mc_lock);
 	read_unlock_bh(&idev->lock);
 	rcu_read_unlock();
 	if (leavegroup)
@@ -562,7 +575,7 @@ int ip6_mc_msfget(struct sock *sk, struct group_filter *gsf,
 	 * so reading the list is safe.
 	 */
 
-	for (pmc=inet6->ipv6_mc_list; pmc; pmc=pmc->next) {
+	for_each_pmc_rcu(inet6, pmc) {
 		if (pmc->ifindex != gsf->gf_interface)
 			continue;
 		if (ipv6_addr_equal(group, &pmc->addr))
@@ -612,13 +625,13 @@ int inet6_mc_check(struct sock *sk, const struct in6_addr *mc_addr,
 	struct ip6_sf_socklist *psl;
 	int rv = 1;
 
-	read_lock(&ipv6_sk_mc_lock);
-	for (mc = np->ipv6_mc_list; mc; mc = mc->next) {
+	rcu_read_lock();
+	for_each_pmc_rcu(np, mc) {
 		if (ipv6_addr_equal(&mc->addr, mc_addr))
 			break;
 	}
 	if (!mc) {
-		read_unlock(&ipv6_sk_mc_lock);
+		rcu_read_unlock();
 		return 1;
 	}
 	read_lock(&mc->sflock);
@@ -638,7 +651,7 @@ int inet6_mc_check(struct sock *sk, const struct in6_addr *mc_addr,
 			rv = 0;
 	}
 	read_unlock(&mc->sflock);
-	read_unlock(&ipv6_sk_mc_lock);
+	rcu_read_unlock();
 
 	return rv;
 }
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 998d6d27e7c..2342545a5ee 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -141,18 +141,18 @@ struct neigh_table nd_tbl = {
 	.proxy_redo =	pndisc_redo,
 	.id =		"ndisc_cache",
 	.parms = {
-		.tbl =			&nd_tbl,
-		.base_reachable_time =	30 * HZ,
-		.retrans_time =	 1 * HZ,
-		.gc_staletime =	60 * HZ,
-		.reachable_time =		30 * HZ,
-		.delay_probe_time =	 5 * HZ,
-		.queue_len =		 3,
-		.ucast_probes =	 3,
-		.mcast_probes =	 3,
-		.anycast_delay =	 1 * HZ,
-		.proxy_delay =		(8 * HZ) / 10,
-		.proxy_qlen =		64,
+		.tbl			= &nd_tbl,
+		.base_reachable_time	= ND_REACHABLE_TIME,
+		.retrans_time		= ND_RETRANS_TIMER,
+		.gc_staletime		= 60 * HZ,
+		.reachable_time		= ND_REACHABLE_TIME,
+		.delay_probe_time	= 5 * HZ,
+		.queue_len		= 3,
+		.ucast_probes		= 3,
+		.mcast_probes		= 3,
+		.anycast_delay		= 1 * HZ,
+		.proxy_delay		= (8 * HZ) / 10,
+		.proxy_qlen		= 64,
 	},
 	.gc_interval =	  30 * HZ,
 	.gc_thresh1 =	 128,
@@ -1259,7 +1259,8 @@ static void ndisc_router_discovery(struct sk_buff *skb)
 	if (ra_msg->icmph.icmp6_hop_limit) {
 		in6_dev->cnf.hop_limit = ra_msg->icmph.icmp6_hop_limit;
 		if (rt)
-			rt->dst.metrics[RTAX_HOPLIMIT-1] = ra_msg->icmph.icmp6_hop_limit;
+			dst_metric_set(&rt->dst, RTAX_HOPLIMIT,
+				       ra_msg->icmph.icmp6_hop_limit);
 	}
 
 skip_defrtr:
@@ -1377,7 +1378,7 @@ skip_linkparms:
 			in6_dev->cnf.mtu6 = mtu;
 
 			if (rt)
-				rt->dst.metrics[RTAX_MTU-1] = mtu;
+				dst_metric_set(&rt->dst, RTAX_MTU, mtu);
 
 			rt6_mtu_change(skb->dev, mtu);
 		}
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c
index 7155b2451d7..35915e8617f 100644
--- a/net/ipv6/netfilter.c
+++ b/net/ipv6/netfilter.c
@@ -18,10 +18,8 @@ int ip6_route_me_harder(struct sk_buff *skb)
 	struct flowi fl = {
 		.oif = skb->sk ? skb->sk->sk_bound_dev_if : 0,
 		.mark = skb->mark,
-		.nl_u =
-		{ .ip6_u =
-		  { .daddr = iph->daddr,
-		    .saddr = iph->saddr, } },
+		.fl6_dst = iph->daddr,
+		.fl6_src = iph->saddr,
 	};
 
 	dst = ip6_route_output(net, skb->sk, &fl);
diff --git a/net/ipv6/netfilter/Makefile b/net/ipv6/netfilter/Makefile
index 0a432c9b079..abfee91ce81 100644
--- a/net/ipv6/netfilter/Makefile
+++ b/net/ipv6/netfilter/Makefile
@@ -11,13 +11,13 @@ obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o
 obj-$(CONFIG_IP6_NF_SECURITY) += ip6table_security.o
 
 # objects for l3 independent conntrack
-nf_conntrack_ipv6-objs  :=  nf_conntrack_l3proto_ipv6.o nf_conntrack_proto_icmpv6.o
+nf_conntrack_ipv6-y  :=  nf_conntrack_l3proto_ipv6.o nf_conntrack_proto_icmpv6.o
 
 # l3 independent conntrack
 obj-$(CONFIG_NF_CONNTRACK_IPV6) += nf_conntrack_ipv6.o nf_defrag_ipv6.o
 
 # defrag
-nf_defrag_ipv6-objs := nf_defrag_ipv6_hooks.o nf_conntrack_reasm.o
+nf_defrag_ipv6-y := nf_defrag_ipv6_hooks.o nf_conntrack_reasm.o
 obj-$(CONFIG_NF_DEFRAG_IPV6) += nf_defrag_ipv6.o
 
 # matches
diff --git a/net/ipv6/netfilter/ip6_tables.c b/net/ipv6/netfilter/ip6_tables.c
index 455582384ec..0c9973a657f 100644
--- a/net/ipv6/netfilter/ip6_tables.c
+++ b/net/ipv6/netfilter/ip6_tables.c
@@ -1093,6 +1093,7 @@ static int compat_table_info(const struct xt_table_info *info,
 	memcpy(newinfo, info, offsetof(struct xt_table_info, entries));
 	newinfo->initial_entries = 0;
 	loc_cpu_entry = info->entries[raw_smp_processor_id()];
+	xt_compat_init_offsets(AF_INET6, info->number);
 	xt_entry_foreach(iter, loc_cpu_entry, info->size) {
 		ret = compat_calc_entry(iter, info, loc_cpu_entry, newinfo);
 		if (ret != 0)
@@ -1696,6 +1697,7 @@ translate_compat_table(struct net *net,
 	duprintf("translate_compat_table: size %u\n", info->size);
 	j = 0;
 	xt_compat_lock(AF_INET6);
+	xt_compat_init_offsets(AF_INET6, number);
 	/* Walk through entries, checking offsets. */
 	xt_entry_foreach(iter0, entry0, total_size) {
 		ret = check_compat_entry_size_and_hooks(iter0, info, &size,
diff --git a/net/ipv6/netfilter/ip6t_REJECT.c b/net/ipv6/netfilter/ip6t_REJECT.c
index 2933396e028..bf998feac14 100644
--- a/net/ipv6/netfilter/ip6t_REJECT.c
+++ b/net/ipv6/netfilter/ip6t_REJECT.c
@@ -124,7 +124,7 @@ static void send_reset(struct net *net, struct sk_buff *oldskb)
 	skb_reset_network_header(nskb);
 	ip6h = ipv6_hdr(nskb);
 	ip6h->version = 6;
-	ip6h->hop_limit = dst_metric(dst, RTAX_HOPLIMIT);
+	ip6h->hop_limit = ip6_dst_hoplimit(dst);
 	ip6h->nexthdr = IPPROTO_TCP;
 	ipv6_addr_copy(&ip6h->saddr, &oip6h->daddr);
 	ipv6_addr_copy(&ip6h->daddr, &oip6h->saddr);
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index eb9f1c03de3..66e003e1fcd 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -286,7 +286,7 @@ found:
 
 	/* Check for overlap with preceding fragment. */
 	if (prev &&
-	    (NFCT_FRAG6_CB(prev)->offset + prev->len) - offset > 0)
+	    (NFCT_FRAG6_CB(prev)->offset + prev->len) > offset)
 		goto discard_fq;
 
 	/* Look for overlap with succeeding segment. */
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index 0f276645375..07beeb06f75 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -104,26 +104,22 @@ static int ip6_frag_reasm(struct frag_queue *fq, struct sk_buff *prev,
 unsigned int inet6_hash_frag(__be32 id, const struct in6_addr *saddr,
 			     const struct in6_addr *daddr, u32 rnd)
 {
-	u32 a, b, c;
-
-	a = (__force u32)saddr->s6_addr32[0];
-	b = (__force u32)saddr->s6_addr32[1];
-	c = (__force u32)saddr->s6_addr32[2];
-
-	a += JHASH_GOLDEN_RATIO;
-	b += JHASH_GOLDEN_RATIO;
-	c += rnd;
-	__jhash_mix(a, b, c);
-
-	a += (__force u32)saddr->s6_addr32[3];
-	b += (__force u32)daddr->s6_addr32[0];
-	c += (__force u32)daddr->s6_addr32[1];
-	__jhash_mix(a, b, c);
-
-	a += (__force u32)daddr->s6_addr32[2];
-	b += (__force u32)daddr->s6_addr32[3];
-	c += (__force u32)id;
-	__jhash_mix(a, b, c);
+	u32 c;
+
+	c = jhash_3words((__force u32)saddr->s6_addr32[0],
+			 (__force u32)saddr->s6_addr32[1],
+			 (__force u32)saddr->s6_addr32[2],
+			 rnd);
+
+	c = jhash_3words((__force u32)saddr->s6_addr32[3],
+			 (__force u32)daddr->s6_addr32[0],
+			 (__force u32)daddr->s6_addr32[1],
+			 c);
+
+	c =  jhash_3words((__force u32)daddr->s6_addr32[2],
+			  (__force u32)daddr->s6_addr32[3],
+			  (__force u32)id,
+			  c);
 
 	return c & (INETFRAGS_HASHSZ - 1);
 }
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index fc328339be9..373bd0416f6 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -76,6 +76,8 @@
 
 static struct rt6_info * ip6_rt_copy(struct rt6_info *ort);
 static struct dst_entry	*ip6_dst_check(struct dst_entry *dst, u32 cookie);
+static unsigned int	 ip6_default_advmss(const struct dst_entry *dst);
+static unsigned int	 ip6_default_mtu(const struct dst_entry *dst);
 static struct dst_entry *ip6_negative_advice(struct dst_entry *);
 static void		ip6_dst_destroy(struct dst_entry *);
 static void		ip6_dst_ifdown(struct dst_entry *,
@@ -103,6 +105,8 @@ static struct dst_ops ip6_dst_ops_template = {
 	.gc			=	ip6_dst_gc,
 	.gc_thresh		=	1024,
 	.check			=	ip6_dst_check,
+	.default_advmss		=	ip6_default_advmss,
+	.default_mtu		=	ip6_default_mtu,
 	.destroy		=	ip6_dst_destroy,
 	.ifdown			=	ip6_dst_ifdown,
 	.negative_advice	=	ip6_negative_advice,
@@ -129,7 +133,6 @@ static struct rt6_info ip6_null_entry_template = {
 		.__use		= 1,
 		.obsolete	= -1,
 		.error		= -ENETUNREACH,
-		.metrics	= { [RTAX_HOPLIMIT - 1] = 255, },
 		.input		= ip6_pkt_discard,
 		.output		= ip6_pkt_discard_out,
 	},
@@ -150,7 +153,6 @@ static struct rt6_info ip6_prohibit_entry_template = {
 		.__use		= 1,
 		.obsolete	= -1,
 		.error		= -EACCES,
-		.metrics	= { [RTAX_HOPLIMIT - 1] = 255, },
 		.input		= ip6_pkt_prohibit,
 		.output		= ip6_pkt_prohibit_out,
 	},
@@ -166,7 +168,6 @@ static struct rt6_info ip6_blk_hole_entry_template = {
 		.__use		= 1,
 		.obsolete	= -1,
 		.error		= -EINVAL,
-		.metrics	= { [RTAX_HOPLIMIT - 1] = 255, },
 		.input		= dst_discard,
 		.output		= dst_discard,
 	},
@@ -188,11 +189,29 @@ static void ip6_dst_destroy(struct dst_entry *dst)
 {
 	struct rt6_info *rt = (struct rt6_info *)dst;
 	struct inet6_dev *idev = rt->rt6i_idev;
+	struct inet_peer *peer = rt->rt6i_peer;
 
 	if (idev != NULL) {
 		rt->rt6i_idev = NULL;
 		in6_dev_put(idev);
 	}
+	if (peer) {
+		BUG_ON(!(rt->rt6i_flags & RTF_CACHE));
+		rt->rt6i_peer = NULL;
+		inet_putpeer(peer);
+	}
+}
+
+void rt6_bind_peer(struct rt6_info *rt, int create)
+{
+	struct inet_peer *peer;
+
+	if (WARN_ON(!(rt->rt6i_flags & RTF_CACHE)))
+		return;
+
+	peer = inet_getpeer_v6(&rt->rt6i_dst.addr, create);
+	if (peer && cmpxchg(&rt->rt6i_peer, NULL, peer) != NULL)
+		inet_putpeer(peer);
 }
 
 static void ip6_dst_ifdown(struct dst_entry *dst, struct net_device *dev,
@@ -558,11 +577,7 @@ struct rt6_info *rt6_lookup(struct net *net, const struct in6_addr *daddr,
 {
 	struct flowi fl = {
 		.oif = oif,
-		.nl_u = {
-			.ip6_u = {
-				.daddr = *daddr,
-			},
-		},
+		.fl6_dst = *daddr,
 	};
 	struct dst_entry *dst;
 	int flags = strict ? RT6_LOOKUP_F_IFACE : 0;
@@ -778,13 +793,9 @@ void ip6_route_input(struct sk_buff *skb)
 	int flags = RT6_LOOKUP_F_HAS_SADDR;
 	struct flowi fl = {
 		.iif = skb->dev->ifindex,
-		.nl_u = {
-			.ip6_u = {
-				.daddr = iph->daddr,
-				.saddr = iph->saddr,
-				.flowlabel = (* (__be32 *) iph)&IPV6_FLOWINFO_MASK,
-			},
-		},
+		.fl6_dst = iph->daddr,
+		.fl6_src = iph->saddr,
+		.fl6_flowlabel = (* (__be32 *) iph)&IPV6_FLOWINFO_MASK,
 		.mark = skb->mark,
 		.proto = iph->nexthdr,
 	};
@@ -834,7 +845,7 @@ int ip6_dst_blackhole(struct sock *sk, struct dst_entry **dstp, struct flowi *fl
 		new->input = dst_discard;
 		new->output = dst_discard;
 
-		memcpy(new->metrics, ort->dst.metrics, RTAX_MAX*sizeof(u32));
+		dst_copy_metrics(new, &ort->dst);
 		new->dev = ort->dst.dev;
 		if (new->dev)
 			dev_hold(new->dev);
@@ -918,18 +929,22 @@ static void ip6_rt_update_pmtu(struct dst_entry *dst, u32 mtu)
 	if (mtu < dst_mtu(dst) && rt6->rt6i_dst.plen == 128) {
 		rt6->rt6i_flags |= RTF_MODIFIED;
 		if (mtu < IPV6_MIN_MTU) {
+			u32 features = dst_metric(dst, RTAX_FEATURES);
 			mtu = IPV6_MIN_MTU;
-			dst->metrics[RTAX_FEATURES-1] |= RTAX_FEATURE_ALLFRAG;
+			features |= RTAX_FEATURE_ALLFRAG;
+			dst_metric_set(dst, RTAX_FEATURES, features);
 		}
-		dst->metrics[RTAX_MTU-1] = mtu;
+		dst_metric_set(dst, RTAX_MTU, mtu);
 		call_netevent_notifiers(NETEVENT_PMTU_UPDATE, dst);
 	}
 }
 
-static int ipv6_get_mtu(struct net_device *dev);
-
-static inline unsigned int ipv6_advmss(struct net *net, unsigned int mtu)
+static unsigned int ip6_default_advmss(const struct dst_entry *dst)
 {
+	struct net_device *dev = dst->dev;
+	unsigned int mtu = dst_mtu(dst);
+	struct net *net = dev_net(dev);
+
 	mtu -= sizeof(struct ipv6hdr) + sizeof(struct tcphdr);
 
 	if (mtu < net->ipv6.sysctl.ip6_rt_min_advmss)
@@ -946,6 +961,20 @@ static inline unsigned int ipv6_advmss(struct net *net, unsigned int mtu)
 	return mtu;
 }
 
+static unsigned int ip6_default_mtu(const struct dst_entry *dst)
+{
+	unsigned int mtu = IPV6_MIN_MTU;
+	struct inet6_dev *idev;
+
+	rcu_read_lock();
+	idev = __in6_dev_get(dst->dev);
+	if (idev)
+		mtu = idev->cnf.mtu6;
+	rcu_read_unlock();
+
+	return mtu;
+}
+
 static struct dst_entry *icmp6_dst_gc_list;
 static DEFINE_SPINLOCK(icmp6_dst_lock);
 
@@ -979,9 +1008,7 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev,
 	rt->rt6i_idev     = idev;
 	rt->rt6i_nexthop  = neigh;
 	atomic_set(&rt->dst.__refcnt, 1);
-	rt->dst.metrics[RTAX_HOPLIMIT-1] = 255;
-	rt->dst.metrics[RTAX_MTU-1] = ipv6_get_mtu(rt->rt6i_dev);
-	rt->dst.metrics[RTAX_ADVMSS-1] = ipv6_advmss(net, dst_mtu(&rt->dst));
+	dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);
 	rt->dst.output  = ip6_output;
 
 #if 0	/* there's no chance to use these for ndisc */
@@ -1080,23 +1107,10 @@ out:
    Remove it only when all the things will work!
  */
 
-static int ipv6_get_mtu(struct net_device *dev)
-{
-	int mtu = IPV6_MIN_MTU;
-	struct inet6_dev *idev;
-
-	rcu_read_lock();
-	idev = __in6_dev_get(dev);
-	if (idev)
-		mtu = idev->cnf.mtu6;
-	rcu_read_unlock();
-	return mtu;
-}
-
 int ip6_dst_hoplimit(struct dst_entry *dst)
 {
-	int hoplimit = dst_metric(dst, RTAX_HOPLIMIT);
-	if (hoplimit < 0) {
+	int hoplimit = dst_metric_raw(dst, RTAX_HOPLIMIT);
+	if (hoplimit == 0) {
 		struct net_device *dev = dst->dev;
 		struct inet6_dev *idev;
 
@@ -1110,6 +1124,7 @@ int ip6_dst_hoplimit(struct dst_entry *dst)
 	}
 	return hoplimit;
 }
+EXPORT_SYMBOL(ip6_dst_hoplimit);
 
 /*
  *
@@ -1295,17 +1310,11 @@ install_route:
 					goto out;
 				}
 
-				rt->dst.metrics[type - 1] = nla_get_u32(nla);
+				dst_metric_set(&rt->dst, type, nla_get_u32(nla));
 			}
 		}
 	}
 
-	if (dst_metric(&rt->dst, RTAX_HOPLIMIT) == 0)
-		rt->dst.metrics[RTAX_HOPLIMIT-1] = -1;
-	if (!dst_mtu(&rt->dst))
-		rt->dst.metrics[RTAX_MTU-1] = ipv6_get_mtu(dev);
-	if (!dst_metric(&rt->dst, RTAX_ADVMSS))
-		rt->dst.metrics[RTAX_ADVMSS-1] = ipv6_advmss(net, dst_mtu(&rt->dst));
 	rt->dst.dev = dev;
 	rt->rt6i_idev = idev;
 	rt->rt6i_table = table;
@@ -1463,12 +1472,8 @@ static struct rt6_info *ip6_route_redirect(struct in6_addr *dest,
 	struct ip6rd_flowi rdfl = {
 		.fl = {
 			.oif = dev->ifindex,
-			.nl_u = {
-				.ip6_u = {
-					.daddr = *dest,
-					.saddr = *src,
-				},
-			},
+			.fl6_dst = *dest,
+			.fl6_src = *src,
 		},
 	};
 
@@ -1534,10 +1539,6 @@ void rt6_redirect(struct in6_addr *dest, struct in6_addr *src,
 
 	ipv6_addr_copy(&nrt->rt6i_gateway, (struct in6_addr*)neigh->primary_key);
 	nrt->rt6i_nexthop = neigh_clone(neigh);
-	/* Reset pmtu, it may be better */
-	nrt->dst.metrics[RTAX_MTU-1] = ipv6_get_mtu(neigh->dev);
-	nrt->dst.metrics[RTAX_ADVMSS-1] = ipv6_advmss(dev_net(neigh->dev),
-							dst_mtu(&nrt->dst));
 
 	if (ip6_ins_rt(nrt))
 		goto out;
@@ -1565,11 +1566,16 @@ static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr,
 {
 	struct rt6_info *rt, *nrt;
 	int allfrag = 0;
-
+again:
 	rt = rt6_lookup(net, daddr, saddr, ifindex, 0);
 	if (rt == NULL)
 		return;
 
+	if (rt6_check_expired(rt)) {
+		ip6_del_rt(rt);
+		goto again;
+	}
+
 	if (pmtu >= dst_mtu(&rt->dst))
 		goto out;
 
@@ -1596,9 +1602,12 @@ static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr,
 	   would return automatically.
 	 */
 	if (rt->rt6i_flags & RTF_CACHE) {
-		rt->dst.metrics[RTAX_MTU-1] = pmtu;
-		if (allfrag)
-			rt->dst.metrics[RTAX_FEATURES-1] |= RTAX_FEATURE_ALLFRAG;
+		dst_metric_set(&rt->dst, RTAX_MTU, pmtu);
+		if (allfrag) {
+			u32 features = dst_metric(&rt->dst, RTAX_FEATURES);
+			features |= RTAX_FEATURE_ALLFRAG;
+			dst_metric_set(&rt->dst, RTAX_FEATURES, features);
+		}
 		dst_set_expires(&rt->dst, net->ipv6.sysctl.ip6_rt_mtu_expires);
 		rt->rt6i_flags |= RTF_MODIFIED|RTF_EXPIRES;
 		goto out;
@@ -1615,9 +1624,12 @@ static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr,
 		nrt = rt6_alloc_clone(rt, daddr);
 
 	if (nrt) {
-		nrt->dst.metrics[RTAX_MTU-1] = pmtu;
-		if (allfrag)
-			nrt->dst.metrics[RTAX_FEATURES-1] |= RTAX_FEATURE_ALLFRAG;
+		dst_metric_set(&nrt->dst, RTAX_MTU, pmtu);
+		if (allfrag) {
+			u32 features = dst_metric(&nrt->dst, RTAX_FEATURES);
+			features |= RTAX_FEATURE_ALLFRAG;
+			dst_metric_set(&nrt->dst, RTAX_FEATURES, features);
+		}
 
 		/* According to RFC 1981, detecting PMTU increase shouldn't be
 		 * happened within 5 mins, the recommended timer is 10 mins.
@@ -1668,7 +1680,7 @@ static struct rt6_info * ip6_rt_copy(struct rt6_info *ort)
 		rt->dst.input = ort->dst.input;
 		rt->dst.output = ort->dst.output;
 
-		memcpy(rt->dst.metrics, ort->dst.metrics, RTAX_MAX*sizeof(u32));
+		dst_copy_metrics(&rt->dst, &ort->dst);
 		rt->dst.error = ort->dst.error;
 		rt->dst.dev = ort->dst.dev;
 		if (rt->dst.dev)
@@ -1945,8 +1957,12 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
 	struct rt6_info *rt = ip6_dst_alloc(&net->ipv6.ip6_dst_ops);
 	struct neighbour *neigh;
 
-	if (rt == NULL)
+	if (rt == NULL) {
+		if (net_ratelimit())
+			pr_warning("IPv6:  Maximum number of routes reached,"
+				   " consider increasing route/max_size.\n");
 		return ERR_PTR(-ENOMEM);
+	}
 
 	dev_hold(net->loopback_dev);
 	in6_dev_hold(idev);
@@ -1956,9 +1972,7 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
 	rt->dst.output = ip6_output;
 	rt->rt6i_dev = net->loopback_dev;
 	rt->rt6i_idev = idev;
-	rt->dst.metrics[RTAX_MTU-1] = ipv6_get_mtu(rt->rt6i_dev);
-	rt->dst.metrics[RTAX_ADVMSS-1] = ipv6_advmss(net, dst_mtu(&rt->dst));
-	rt->dst.metrics[RTAX_HOPLIMIT-1] = -1;
+	dst_metric_set(&rt->dst, RTAX_HOPLIMIT, -1);
 	rt->dst.obsolete = -1;
 
 	rt->rt6i_flags = RTF_UP | RTF_NONEXTHOP;
@@ -1995,11 +2009,11 @@ struct arg_dev_net {
 
 static int fib6_ifdown(struct rt6_info *rt, void *arg)
 {
-	struct net_device *dev = ((struct arg_dev_net *)arg)->dev;
-	struct net *net = ((struct arg_dev_net *)arg)->net;
+	const struct arg_dev_net *adn = arg;
+	const struct net_device *dev = adn->dev;
 
-	if (((void *)rt->rt6i_dev == dev || dev == NULL) &&
-	    rt != net->ipv6.ip6_null_entry) {
+	if ((rt->rt6i_dev == dev || dev == NULL) &&
+	    rt != adn->net->ipv6.ip6_null_entry) {
 		RT6_TRACE("deleted by ifdown %p\n", rt);
 		return -1;
 	}
@@ -2027,7 +2041,6 @@ static int rt6_mtu_change_route(struct rt6_info *rt, void *p_arg)
 {
 	struct rt6_mtu_change_arg *arg = (struct rt6_mtu_change_arg *) p_arg;
 	struct inet6_dev *idev;
-	struct net *net = dev_net(arg->dev);
 
 	/* In IPv6 pmtu discovery is not optional,
 	   so that RTAX_MTU lock cannot disable it.
@@ -2058,8 +2071,7 @@ static int rt6_mtu_change_route(struct rt6_info *rt, void *p_arg)
 	    (dst_mtu(&rt->dst) >= arg->mtu ||
 	     (dst_mtu(&rt->dst) < arg->mtu &&
 	      dst_mtu(&rt->dst) == idev->cnf.mtu6))) {
-		rt->dst.metrics[RTAX_MTU-1] = arg->mtu;
-		rt->dst.metrics[RTAX_ADVMSS-1] = ipv6_advmss(net, arg->mtu);
+		dst_metric_set(&rt->dst, RTAX_MTU, arg->mtu);
 	}
 	return 0;
 }
@@ -2285,7 +2297,7 @@ static int rt6_fill_node(struct net *net,
 			NLA_PUT(skb, RTA_PREFSRC, 16, &saddr_buf);
 	}
 
-	if (rtnetlink_put_metrics(skb, rt->dst.metrics) < 0)
+	if (rtnetlink_put_metrics(skb, dst_metrics_ptr(&rt->dst)) < 0)
 		goto nla_put_failure;
 
 	if (rt->dst.neighbour)
@@ -2461,8 +2473,6 @@ static int ip6_route_dev_notify(struct notifier_block *this,
 
 #ifdef CONFIG_PROC_FS
 
-#define RT6_INFO_LEN (32 + 4 + 32 + 4 + 32 + 40 + 5 + 1)
-
 struct rt6_proc_arg
 {
 	char *buffer;
@@ -2678,6 +2688,7 @@ static int __net_init ip6_route_net_init(struct net *net)
 	net->ipv6.ip6_null_entry->dst.path =
 		(struct dst_entry *)net->ipv6.ip6_null_entry;
 	net->ipv6.ip6_null_entry->dst.ops = &net->ipv6.ip6_dst_ops;
+	dst_metric_set(&net->ipv6.ip6_null_entry->dst, RTAX_HOPLIMIT, 255);
 
 #ifdef CONFIG_IPV6_MULTIPLE_TABLES
 	net->ipv6.ip6_prohibit_entry = kmemdup(&ip6_prohibit_entry_template,
@@ -2688,6 +2699,7 @@ static int __net_init ip6_route_net_init(struct net *net)
 	net->ipv6.ip6_prohibit_entry->dst.path =
 		(struct dst_entry *)net->ipv6.ip6_prohibit_entry;
 	net->ipv6.ip6_prohibit_entry->dst.ops = &net->ipv6.ip6_dst_ops;
+	dst_metric_set(&net->ipv6.ip6_prohibit_entry->dst, RTAX_HOPLIMIT, 255);
 
 	net->ipv6.ip6_blk_hole_entry = kmemdup(&ip6_blk_hole_entry_template,
 					       sizeof(*net->ipv6.ip6_blk_hole_entry),
@@ -2697,6 +2709,7 @@ static int __net_init ip6_route_net_init(struct net *net)
 	net->ipv6.ip6_blk_hole_entry->dst.path =
 		(struct dst_entry *)net->ipv6.ip6_blk_hole_entry;
 	net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
+	dst_metric_set(&net->ipv6.ip6_blk_hole_entry->dst, RTAX_HOPLIMIT, 255);
 #endif
 
 	net->ipv6.sysctl.flush_delay = 0;
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index d6bfaec3bbb..8ce38f10a54 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -606,8 +606,9 @@ static int ipip6_rcv(struct sk_buff *skb)
 		return 0;
 	}
 
-	icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0);
+	/* no tunnel matched,  let upstream know, ipsec may handle it */
 	rcu_read_unlock();
+	return 1;
 out:
 	kfree_skb(skb);
 	return 0;
@@ -730,10 +731,9 @@ static netdev_tx_t ipip6_tunnel_xmit(struct sk_buff *skb,
 	}
 
 	{
-		struct flowi fl = { .nl_u = { .ip4_u =
-					      { .daddr = dst,
-						.saddr = tiph->saddr,
-						.tos = RT_TOS(tos) } },
+		struct flowi fl = { .fl4_dst = dst,
+				    .fl4_src = tiph->saddr,
+				    .fl4_tos = RT_TOS(tos),
 				    .oif = tunnel->parms.link,
 				    .proto = IPPROTO_IPV6 };
 		if (ip_route_output_key(dev_net(dev), &rt, &fl)) {
@@ -855,10 +855,9 @@ static void ipip6_tunnel_bind_dev(struct net_device *dev)
 	iph = &tunnel->parms.iph;
 
 	if (iph->daddr) {
-		struct flowi fl = { .nl_u = { .ip4_u =
-					      { .daddr = iph->daddr,
-						.saddr = iph->saddr,
-						.tos = RT_TOS(iph->tos) } },
+		struct flowi fl = { .fl4_dst = iph->daddr,
+				    .fl4_src = iph->saddr,
+				    .fl4_tos = RT_TOS(iph->tos),
 				    .oif = tunnel->parms.link,
 				    .proto = IPPROTO_IPV6 };
 		struct rtable *rt;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 7e41e2cbb85..20aa95e3735 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -130,6 +130,7 @@ static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct in6_addr *saddr = NULL, *final_p, final;
+	struct rt6_info *rt;
 	struct flowi fl;
 	struct dst_entry *dst;
 	int addr_type;
@@ -280,6 +281,26 @@ static int tcp_v6_connect(struct sock *sk, struct sockaddr *uaddr,
 	sk->sk_gso_type = SKB_GSO_TCPV6;
 	__ip6_dst_store(sk, dst, NULL, NULL);
 
+	rt = (struct rt6_info *) dst;
+	if (tcp_death_row.sysctl_tw_recycle &&
+	    !tp->rx_opt.ts_recent_stamp &&
+	    ipv6_addr_equal(&rt->rt6i_dst.addr, &np->daddr)) {
+		struct inet_peer *peer = rt6_get_peer(rt);
+		/*
+		 * VJ's idea. We save last timestamp seen from
+		 * the destination in peer table, when entering state
+		 * TIME-WAIT * and initialize rx_opt.ts_recent from it,
+		 * when trying new connection.
+		 */
+		if (peer) {
+			inet_peer_refcheck(peer);
+			if ((u32)get_seconds() - peer->tcp_ts_stamp <= TCP_PAWS_MSL) {
+				tp->rx_opt.ts_recent_stamp = peer->tcp_ts_stamp;
+				tp->rx_opt.ts_recent = peer->tcp_ts;
+			}
+		}
+	}
+
 	icsk->icsk_ext_hdr_len = 0;
 	if (np->opt)
 		icsk->icsk_ext_hdr_len = (np->opt->opt_flen +
@@ -906,12 +927,6 @@ static const struct tcp_request_sock_ops tcp_request_sock_ipv6_ops = {
 };
 #endif
 
-static struct timewait_sock_ops tcp6_timewait_sock_ops = {
-	.twsk_obj_size	= sizeof(struct tcp6_timewait_sock),
-	.twsk_unique	= tcp_twsk_unique,
-	.twsk_destructor= tcp_twsk_destructor,
-};
-
 static void __tcp_v6_send_check(struct sk_buff *skb,
 				struct in6_addr *saddr, struct in6_addr *daddr)
 {
@@ -1176,6 +1191,7 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
 	struct ipv6_pinfo *np = inet6_sk(sk);
 	struct tcp_sock *tp = tcp_sk(sk);
 	__u32 isn = TCP_SKB_CB(skb)->when;
+	struct dst_entry *dst = NULL;
 #ifdef CONFIG_SYN_COOKIES
 	int want_cookie = 0;
 #else
@@ -1273,6 +1289,8 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
 		TCP_ECN_create_request(req, tcp_hdr(skb));
 
 	if (!isn) {
+		struct inet_peer *peer = NULL;
+
 		if (ipv6_opt_accepted(sk, skb) ||
 		    np->rxopt.bits.rxinfo || np->rxopt.bits.rxoinfo ||
 		    np->rxopt.bits.rxhlim || np->rxopt.bits.rxohlim) {
@@ -1285,13 +1303,57 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
 		if (!sk->sk_bound_dev_if &&
 		    ipv6_addr_type(&treq->rmt_addr) & IPV6_ADDR_LINKLOCAL)
 			treq->iif = inet6_iif(skb);
-		if (!want_cookie) {
-			isn = tcp_v6_init_sequence(skb);
-		} else {
+
+		if (want_cookie) {
 			isn = cookie_v6_init_sequence(sk, skb, &req->mss);
 			req->cookie_ts = tmp_opt.tstamp_ok;
+			goto have_isn;
 		}
+
+		/* VJ's idea. We save last timestamp seen
+		 * from the destination in peer table, when entering
+		 * state TIME-WAIT, and check against it before
+		 * accepting new connection request.
+		 *
+		 * If "isn" is not zero, this request hit alive
+		 * timewait bucket, so that all the necessary checks
+		 * are made in the function processing timewait state.
+		 */
+		if (tmp_opt.saw_tstamp &&
+		    tcp_death_row.sysctl_tw_recycle &&
+		    (dst = inet6_csk_route_req(sk, req)) != NULL &&
+		    (peer = rt6_get_peer((struct rt6_info *)dst)) != NULL &&
+		    ipv6_addr_equal((struct in6_addr *)peer->daddr.a6,
+				    &treq->rmt_addr)) {
+			inet_peer_refcheck(peer);
+			if ((u32)get_seconds() - peer->tcp_ts_stamp < TCP_PAWS_MSL &&
+			    (s32)(peer->tcp_ts - req->ts_recent) >
+							TCP_PAWS_WINDOW) {
+				NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_PAWSPASSIVEREJECTED);
+				goto drop_and_release;
+			}
+		}
+		/* Kill the following clause, if you dislike this way. */
+		else if (!sysctl_tcp_syncookies &&
+			 (sysctl_max_syn_backlog - inet_csk_reqsk_queue_len(sk) <
+			  (sysctl_max_syn_backlog >> 2)) &&
+			 (!peer || !peer->tcp_ts_stamp) &&
+			 (!dst || !dst_metric(dst, RTAX_RTT))) {
+			/* Without syncookies last quarter of
+			 * backlog is filled with destinations,
+			 * proven to be alive.
+			 * It means that we continue to communicate
+			 * to destinations, already remembered
+			 * to the moment of synflood.
+			 */
+			LIMIT_NETDEBUG(KERN_DEBUG "TCP: drop open request from %pI6/%u\n",
+				       &treq->rmt_addr, ntohs(tcp_hdr(skb)->source));
+			goto drop_and_release;
+		}
+
+		isn = tcp_v6_init_sequence(skb);
 	}
+have_isn:
 	tcp_rsk(req)->snt_isn = isn;
 
 	security_inet_conn_request(sk, skb, req);
@@ -1304,6 +1366,8 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb)
 	inet6_csk_reqsk_queue_hash_add(sk, req, TCP_TIMEOUT_INIT);
 	return 0;
 
+drop_and_release:
+	dst_release(dst);
 drop_and_free:
 	reqsk_free(req);
 drop:
@@ -1382,28 +1446,9 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
 	if (sk_acceptq_is_full(sk))
 		goto out_overflow;
 
-	if (dst == NULL) {
-		struct in6_addr *final_p, final;
-		struct flowi fl;
-
-		memset(&fl, 0, sizeof(fl));
-		fl.proto = IPPROTO_TCP;
-		ipv6_addr_copy(&fl.fl6_dst, &treq->rmt_addr);
-		final_p = fl6_update_dst(&fl, opt, &final);
-		ipv6_addr_copy(&fl.fl6_src, &treq->loc_addr);
-		fl.oif = sk->sk_bound_dev_if;
-		fl.mark = sk->sk_mark;
-		fl.fl_ip_dport = inet_rsk(req)->rmt_port;
-		fl.fl_ip_sport = inet_rsk(req)->loc_port;
-		security_req_classify_flow(req, &fl);
-
-		if (ip6_dst_lookup(sk, &dst, &fl))
-			goto out;
-
-		if (final_p)
-			ipv6_addr_copy(&fl.fl6_dst, final_p);
-
-		if ((xfrm_lookup(sock_net(sk), &dst, &fl, sk, 0)) < 0)
+	if (!dst) {
+		dst = inet6_csk_route_req(sk, req);
+		if (!dst)
 			goto out;
 	}
 
@@ -1476,7 +1521,7 @@ static struct sock * tcp_v6_syn_recv_sock(struct sock *sk, struct sk_buff *skb,
 
 	tcp_mtup_init(newsk);
 	tcp_sync_mss(newsk, dst_mtu(dst));
-	newtp->advmss = dst_metric(dst, RTAX_ADVMSS);
+	newtp->advmss = dst_metric_advmss(dst);
 	tcp_initialize_rcv_mss(newsk);
 
 	newinet->inet_daddr = newinet->inet_saddr = LOOPBACK4_IPV6;
@@ -1818,19 +1863,51 @@ do_time_wait:
 	goto discard_it;
 }
 
-static int tcp_v6_remember_stamp(struct sock *sk)
+static struct inet_peer *tcp_v6_get_peer(struct sock *sk, bool *release_it)
 {
-	/* Alas, not yet... */
-	return 0;
+	struct rt6_info *rt = (struct rt6_info *) __sk_dst_get(sk);
+	struct ipv6_pinfo *np = inet6_sk(sk);
+	struct inet_peer *peer;
+
+	if (!rt ||
+	    !ipv6_addr_equal(&np->daddr, &rt->rt6i_dst.addr)) {
+		peer = inet_getpeer_v6(&np->daddr, 1);
+		*release_it = true;
+	} else {
+		if (!rt->rt6i_peer)
+			rt6_bind_peer(rt, 1);
+		peer = rt->rt6i_peer;
+		*release_it = false;
+	}
+
+	return peer;
 }
 
+static void *tcp_v6_tw_get_peer(struct sock *sk)
+{
+	struct inet6_timewait_sock *tw6 = inet6_twsk(sk);
+	struct inet_timewait_sock *tw = inet_twsk(sk);
+
+	if (tw->tw_family == AF_INET)
+		return tcp_v4_tw_get_peer(sk);
+
+	return inet_getpeer_v6(&tw6->tw_v6_daddr, 1);
+}
+
+static struct timewait_sock_ops tcp6_timewait_sock_ops = {
+	.twsk_obj_size	= sizeof(struct tcp6_timewait_sock),
+	.twsk_unique	= tcp_twsk_unique,
+	.twsk_destructor= tcp_twsk_destructor,
+	.twsk_getpeer	= tcp_v6_tw_get_peer,
+};
+
 static const struct inet_connection_sock_af_ops ipv6_specific = {
 	.queue_xmit	   = inet6_csk_xmit,
 	.send_check	   = tcp_v6_send_check,
 	.rebuild_header	   = inet6_sk_rebuild_header,
 	.conn_request	   = tcp_v6_conn_request,
 	.syn_recv_sock	   = tcp_v6_syn_recv_sock,
-	.remember_stamp	   = tcp_v6_remember_stamp,
+	.get_peer	   = tcp_v6_get_peer,
 	.net_header_len	   = sizeof(struct ipv6hdr),
 	.setsockopt	   = ipv6_setsockopt,
 	.getsockopt	   = ipv6_getsockopt,
@@ -1862,7 +1939,7 @@ static const struct inet_connection_sock_af_ops ipv6_mapped = {
 	.rebuild_header	   = inet_sk_rebuild_header,
 	.conn_request	   = tcp_v6_conn_request,
 	.syn_recv_sock	   = tcp_v6_syn_recv_sock,
-	.remember_stamp	   = tcp_v4_remember_stamp,
+	.get_peer	   = tcp_v4_get_peer,
 	.net_header_len	   = sizeof(struct iphdr),
 	.setsockopt	   = ipv6_setsockopt,
 	.getsockopt	   = ipv6_getsockopt,
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 91def93bec8..9a009c66c8a 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -54,8 +54,8 @@ int ipv6_rcv_saddr_equal(const struct sock *sk, const struct sock *sk2)
 {
 	const struct in6_addr *sk_rcv_saddr6 = &inet6_sk(sk)->rcv_saddr;
 	const struct in6_addr *sk2_rcv_saddr6 = inet6_rcv_saddr(sk2);
-	__be32 sk1_rcv_saddr = inet_sk(sk)->inet_rcv_saddr;
-	__be32 sk2_rcv_saddr = inet_rcv_saddr(sk2);
+	__be32 sk1_rcv_saddr = sk_rcv_saddr(sk);
+	__be32 sk2_rcv_saddr = sk_rcv_saddr(sk2);
 	int sk_ipv6only = ipv6_only_sock(sk);
 	int sk2_ipv6only = inet_v6_ipv6only(sk2);
 	int addr_type = ipv6_addr_type(sk_rcv_saddr6);
@@ -227,7 +227,7 @@ begin:
 
 	if (result) {
 exact_match:
-		if (unlikely(!atomic_inc_not_zero(&result->sk_refcnt)))
+		if (unlikely(!atomic_inc_not_zero_hint(&result->sk_refcnt, 2)))
 			result = NULL;
 		else if (unlikely(compute_score2(result, net, saddr, sport,
 				  daddr, hnum, dif) < badness)) {
@@ -294,7 +294,7 @@ begin:
 		goto begin;
 
 	if (result) {
-		if (unlikely(!atomic_inc_not_zero(&result->sk_refcnt)))
+		if (unlikely(!atomic_inc_not_zero_hint(&result->sk_refcnt, 2)))
 			result = NULL;
 		else if (unlikely(compute_score(result, net, hnum, saddr, sport,
 					daddr, dport, dif) < badness)) {
@@ -602,7 +602,7 @@ static void flush_stack(struct sock **stack, unsigned int count,
 
 		sk = stack[i];
 		if (skb1) {
-			if (sk_rcvqueues_full(sk, skb)) {
+			if (sk_rcvqueues_full(sk, skb1)) {
 				kfree_skb(skb1);
 				goto drop;
 			}
@@ -1477,6 +1477,7 @@ struct proto udpv6_prot = {
 	.compat_setsockopt = compat_udpv6_setsockopt,
 	.compat_getsockopt = compat_udpv6_getsockopt,
 #endif
+	.clear_sk	   = sk_prot_clear_portaddr_nulls,
 };
 
 static struct inet_protosw udpv6_protosw = {
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index 5f48fadc27f..986c4de5292 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -55,6 +55,7 @@ struct proto udplitev6_prot = {
 	.compat_setsockopt = compat_udpv6_setsockopt,
 	.compat_getsockopt = compat_udpv6_getsockopt,
 #endif
+	.clear_sk	   = sk_prot_clear_portaddr_nulls,
 };
 
 static struct inet_protosw udplite6_protosw = {
diff --git a/net/ipv6/xfrm6_mode_tunnel.c b/net/ipv6/xfrm6_mode_tunnel.c
index b809812c8d3..645cb968d45 100644
--- a/net/ipv6/xfrm6_mode_tunnel.c
+++ b/net/ipv6/xfrm6_mode_tunnel.c
@@ -14,6 +14,7 @@
 #include <net/dsfield.h>
 #include <net/dst.h>
 #include <net/inet_ecn.h>
+#include <net/ip6_route.h>
 #include <net/ipv6.h>
 #include <net/xfrm.h>
 
@@ -53,7 +54,7 @@ static int xfrm6_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb)
 	if (x->props.flags & XFRM_STATE_NOECN)
 		dsfield &= ~INET_ECN_MASK;
 	ipv6_change_dsfield(top_iph, 0, dsfield);
-	top_iph->hop_limit = dst_metric(dst->child, RTAX_HOPLIMIT);
+	top_iph->hop_limit = ip6_dst_hoplimit(dst->child);
 	ipv6_addr_copy(&top_iph->saddr, (struct in6_addr *)&x->props.saddr);
 	ipv6_addr_copy(&top_iph->daddr, (struct in6_addr *)&x->id.daddr);
 	return 0;
diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c
index 6434bd5ce08..8e688b3de9a 100644
--- a/net/ipv6/xfrm6_output.c
+++ b/net/ipv6/xfrm6_output.c
@@ -17,6 +17,7 @@
 #include <linux/netfilter_ipv6.h>
 #include <net/dst.h>
 #include <net/ipv6.h>
+#include <net/ip6_route.h>
 #include <net/xfrm.h>
 
 int xfrm6_find_1stfragopt(struct xfrm_state *x, struct sk_buff *skb,
@@ -88,8 +89,21 @@ static int xfrm6_output_finish(struct sk_buff *skb)
 	return xfrm_output(skb);
 }
 
+static int __xfrm6_output(struct sk_buff *skb)
+{
+	struct dst_entry *dst = skb_dst(skb);
+	struct xfrm_state *x = dst->xfrm;
+
+	if ((x && x->props.mode == XFRM_MODE_TUNNEL) &&
+	    ((skb->len > ip6_skb_dst_mtu(skb) && !skb_is_gso(skb)) ||
+		dst_allfrag(skb_dst(skb)))) {
+			return ip6_fragment(skb, xfrm6_output_finish);
+	}
+	return xfrm6_output_finish(skb);
+}
+
 int xfrm6_output(struct sk_buff *skb)
 {
 	return NF_HOOK(NFPROTO_IPV6, NF_INET_POST_ROUTING, skb, NULL,
-		       skb_dst(skb)->dev, xfrm6_output_finish);
+		       skb_dst(skb)->dev, __xfrm6_output);
 }
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index 7f097989cde..c9890e25cd4 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -45,7 +45,6 @@
 #include <linux/capability.h>
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/smp_lock.h>
 #include <linux/socket.h>
 #include <linux/sockios.h>
 #include <linux/slab.h>
@@ -2281,6 +2280,16 @@ static int irda_getsockopt(struct socket *sock, int level, int optname,
 
 	switch (optname) {
 	case IRLMP_ENUMDEVICES:
+
+		/* Offset to first device entry */
+		offset = sizeof(struct irda_device_list) -
+			sizeof(struct irda_device_info);
+
+		if (len < offset) {
+			err = -EINVAL;
+			goto out;
+		}
+
 		/* Ask lmp for the current discovery log */
 		discoveries = irlmp_get_discoveries(&list.len, self->mask.word,
 						    self->nslots);
@@ -2291,15 +2300,9 @@ static int irda_getsockopt(struct socket *sock, int level, int optname,
 		}
 
 		/* Write total list length back to client */
-		if (copy_to_user(optval, &list,
-				 sizeof(struct irda_device_list) -
-				 sizeof(struct irda_device_info)))
+		if (copy_to_user(optval, &list, offset))
 			err = -EFAULT;
 
-		/* Offset to first device entry */
-		offset = sizeof(struct irda_device_list) -
-			sizeof(struct irda_device_info);
-
 		/* Copy the list itself - watch for overflow */
 		if (list.len > 2048) {
 			err = -EINVAL;
diff --git a/net/irda/ircomm/Makefile b/net/irda/ircomm/Makefile
index 48689458c08..ab23b5ba7e3 100644
--- a/net/irda/ircomm/Makefile
+++ b/net/irda/ircomm/Makefile
@@ -4,5 +4,5 @@
 
 obj-$(CONFIG_IRCOMM) += ircomm.o ircomm-tty.o
 
-ircomm-objs := ircomm_core.o ircomm_event.o ircomm_lmp.o ircomm_ttp.o
-ircomm-tty-objs := ircomm_tty.o ircomm_tty_attach.o ircomm_tty_ioctl.o ircomm_param.o
+ircomm-y := ircomm_core.o ircomm_event.o ircomm_lmp.o ircomm_ttp.o
+ircomm-tty-y := ircomm_tty.o ircomm_tty_attach.o ircomm_tty_ioctl.o ircomm_param.o
diff --git a/net/irda/irlan/Makefile b/net/irda/irlan/Makefile
index 77549bc8641..94eefbc8e6b 100644
--- a/net/irda/irlan/Makefile
+++ b/net/irda/irlan/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_IRLAN) += irlan.o
 
-irlan-objs := irlan_common.o irlan_eth.o irlan_event.o irlan_client.o irlan_provider.o irlan_filter.o irlan_provider_event.o irlan_client_event.o
+irlan-y := irlan_common.o irlan_eth.o irlan_event.o irlan_client.o irlan_provider.o irlan_filter.o irlan_provider_event.o irlan_client_event.o
diff --git a/net/irda/irnet/Makefile b/net/irda/irnet/Makefile
index b3ee01e0def..61c365c8a2a 100644
--- a/net/irda/irnet/Makefile
+++ b/net/irda/irnet/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_IRNET) += irnet.o
 
-irnet-objs := irnet_ppp.o irnet_irda.o
+irnet-y := irnet_ppp.o irnet_irda.o
diff --git a/net/irda/irnet/irnet_ppp.c b/net/irda/irnet/irnet_ppp.c
index 7fa86373de4..7c567b8aa89 100644
--- a/net/irda/irnet/irnet_ppp.c
+++ b/net/irda/irnet/irnet_ppp.c
@@ -15,7 +15,6 @@
 
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include "irnet_ppp.h"		/* Private header */
 /* Please put other headers in irnet.h - Thanks */
 
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index 285761e77d9..f6054f9ccbe 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -550,22 +550,30 @@ EXPORT_SYMBOL(irttp_close_tsap);
  */
 int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb)
 {
+	int ret;
+
 	IRDA_ASSERT(self != NULL, return -1;);
 	IRDA_ASSERT(self->magic == TTP_TSAP_MAGIC, return -1;);
 	IRDA_ASSERT(skb != NULL, return -1;);
 
 	IRDA_DEBUG(4, "%s()\n", __func__);
 
+	/* Take shortcut on zero byte packets */
+	if (skb->len == 0) {
+		ret = 0;
+		goto err;
+	}
+
 	/* Check that nothing bad happens */
-	if ((skb->len == 0) || (!self->connected)) {
-		IRDA_DEBUG(1, "%s(), No data, or not connected\n",
-			   __func__);
+	if (!self->connected) {
+		IRDA_WARNING("%s(), Not connected\n", __func__);
+		ret = -ENOTCONN;
 		goto err;
 	}
 
 	if (skb->len > self->max_seg_size) {
-		IRDA_DEBUG(1, "%s(), UData is too large for IrLAP!\n",
-			   __func__);
+		IRDA_ERROR("%s(), UData is too large for IrLAP!\n", __func__);
+		ret = -EMSGSIZE;
 		goto err;
 	}
 
@@ -576,7 +584,7 @@ int irttp_udata_request(struct tsap_cb *self, struct sk_buff *skb)
 
 err:
 	dev_kfree_skb(skb);
-	return -1;
+	return ret;
 }
 EXPORT_SYMBOL(irttp_udata_request);
 
@@ -599,9 +607,15 @@ int irttp_data_request(struct tsap_cb *self, struct sk_buff *skb)
 	IRDA_DEBUG(2, "%s() : queue len = %d\n", __func__,
 		   skb_queue_len(&self->tx_queue));
 
+	/* Take shortcut on zero byte packets */
+	if (skb->len == 0) {
+		ret = 0;
+		goto err;
+	}
+
 	/* Check that nothing bad happens */
-	if ((skb->len == 0) || (!self->connected)) {
-		IRDA_WARNING("%s: No data, or not connected\n", __func__);
+	if (!self->connected) {
+		IRDA_WARNING("%s: Not connected\n", __func__);
 		ret = -ENOTCONN;
 		goto err;
 	}
diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c
index f7db676de77..1ee5dab3cfa 100644
--- a/net/iucv/iucv.c
+++ b/net/iucv/iucv.c
@@ -36,6 +36,7 @@
 #define KMSG_COMPONENT "iucv"
 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
 
+#include <linux/kernel_stat.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/spinlock.h>
@@ -1804,6 +1805,7 @@ static void iucv_external_interrupt(unsigned int ext_int_code,
 	struct iucv_irq_data *p;
 	struct iucv_irq_list *work;
 
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_IUC]++;
 	p = iucv_irq_data[smp_processor_id()];
 	if (p->ippathid >= iucv_max_pathid) {
 		WARN_ON(p->ippathid >= iucv_max_pathid);
diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c
index 0bf6a59545a..110efb704c9 100644
--- a/net/l2tp/l2tp_ip.c
+++ b/net/l2tp/l2tp_ip.c
@@ -476,15 +476,13 @@ static int l2tp_ip_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *m
 
 		{
 			struct flowi fl = { .oif = sk->sk_bound_dev_if,
-					    .nl_u = { .ip4_u = {
-							.daddr = daddr,
-							.saddr = inet->inet_saddr,
-							.tos = RT_CONN_FLAGS(sk) } },
+					    .fl4_dst = daddr,
+					    .fl4_src = inet->inet_saddr,
+					    .fl4_tos = RT_CONN_FLAGS(sk),
 					    .proto = sk->sk_protocol,
 					    .flags = inet_sk_flowi_flags(sk),
-					    .uli_u = { .ports = {
-							 .sport = inet->inet_sport,
-							 .dport = inet->inet_dport } } };
+					    .fl_ip_sport = inet->inet_sport,
+					    .fl_ip_dport = inet->inet_dport };
 
 			/* If this fails, retransmit mechanism of transport layer will
 			 * keep trying until route appears or the connection times
@@ -674,4 +672,8 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
 MODULE_DESCRIPTION("L2TP over IP");
 MODULE_VERSION("1.0");
-MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, SOCK_DGRAM, IPPROTO_L2TP);
+
+/* Use the value of SOCK_DGRAM (2) directory, because __stringify does't like
+ * enums
+ */
+MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, 2, IPPROTO_L2TP);
diff --git a/net/lapb/Makefile b/net/lapb/Makefile
index 53f7c90db16..fff797dfc88 100644
--- a/net/lapb/Makefile
+++ b/net/lapb/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_LAPB) += lapb.o
 
-lapb-objs := lapb_in.o lapb_out.o lapb_subr.o lapb_timer.o lapb_iface.o
+lapb-y := lapb_in.o lapb_out.o lapb_subr.o lapb_timer.o lapb_iface.o
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 58261299821..dfd3a648a55 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -316,9 +316,9 @@ static int llc_ui_bind(struct socket *sock, struct sockaddr *uaddr, int addrlen)
 	if (unlikely(addr->sllc_family != AF_LLC))
 		goto out;
 	rc = -ENODEV;
-	rtnl_lock();
+	rcu_read_lock();
 	if (sk->sk_bound_dev_if) {
-		llc->dev = dev_get_by_index(&init_net, sk->sk_bound_dev_if);
+		llc->dev = dev_get_by_index_rcu(&init_net, sk->sk_bound_dev_if);
 		if (llc->dev) {
 			if (!addr->sllc_arphrd)
 				addr->sllc_arphrd = llc->dev->type;
@@ -329,14 +329,15 @@ static int llc_ui_bind(struct socket *sock, struct sockaddr *uaddr, int addrlen)
 			    !llc_mac_match(addr->sllc_mac,
 					   llc->dev->dev_addr)) {
 				rc = -EINVAL;
-				dev_put(llc->dev);
 				llc->dev = NULL;
 			}
 		}
 	} else
-		llc->dev = dev_getbyhwaddr(&init_net, addr->sllc_arphrd,
+		llc->dev = dev_getbyhwaddr_rcu(&init_net, addr->sllc_arphrd,
 					   addr->sllc_mac);
-	rtnl_unlock();
+	if (llc->dev)
+		dev_hold(llc->dev);
+	rcu_read_unlock();
 	if (!llc->dev)
 		goto out;
 	if (!addr->sllc_sap) {
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index 4d6f8653ec8..9109262abd2 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -6,6 +6,7 @@ config MAC80211
 	select CRYPTO_ARC4
 	select CRYPTO_AES
 	select CRC32
+	select AVERAGE
 	---help---
 	  This option enables the hardware independent IEEE 802.11
 	  networking stack.
@@ -92,7 +93,7 @@ config MAC80211_MESH
 config MAC80211_LEDS
 	bool "Enable LED triggers"
 	depends on MAC80211
-	select NEW_LEDS
+	depends on LEDS_CLASS
 	select LEDS_TRIGGERS
 	---help---
 	  This option enables a few LED triggers for different
diff --git a/net/mac80211/aes_ccm.c b/net/mac80211/aes_ccm.c
index d2b03e0851e..4bd6ef0be38 100644
--- a/net/mac80211/aes_ccm.c
+++ b/net/mac80211/aes_ccm.c
@@ -147,6 +147,5 @@ struct crypto_cipher *ieee80211_aes_key_setup_encrypt(const u8 key[])
 
 void ieee80211_aes_key_free(struct crypto_cipher *tfm)
 {
-	if (tfm)
-		crypto_free_cipher(tfm);
+	crypto_free_cipher(tfm);
 }
diff --git a/net/mac80211/aes_cmac.c b/net/mac80211/aes_cmac.c
index b4d66cca76d..d502b2684a6 100644
--- a/net/mac80211/aes_cmac.c
+++ b/net/mac80211/aes_cmac.c
@@ -128,6 +128,5 @@ struct crypto_cipher * ieee80211_aes_cmac_key_setup(const u8 key[])
 
 void ieee80211_aes_cmac_key_free(struct crypto_cipher *tfm)
 {
-	if (tfm)
-		crypto_free_cipher(tfm);
+	crypto_free_cipher(tfm);
 }
diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c
index 720b7a84af5..f138b195d65 100644
--- a/net/mac80211/agg-rx.c
+++ b/net/mac80211/agg-rx.c
@@ -129,9 +129,7 @@ static void sta_rx_agg_reorder_timer_expired(unsigned long data)
 			timer_to_tid[0]);
 
 	rcu_read_lock();
-	spin_lock(&sta->lock);
 	ieee80211_release_reorder_timeout(sta, *ptid);
-	spin_unlock(&sta->lock);
 	rcu_read_unlock();
 }
 
@@ -256,7 +254,7 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 	}
 
 	/* prepare A-MPDU MLME for Rx aggregation */
-	tid_agg_rx = kmalloc(sizeof(struct tid_ampdu_rx), GFP_ATOMIC);
+	tid_agg_rx = kmalloc(sizeof(struct tid_ampdu_rx), GFP_KERNEL);
 	if (!tid_agg_rx) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		if (net_ratelimit())
@@ -280,9 +278,9 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 
 	/* prepare reordering buffer */
 	tid_agg_rx->reorder_buf =
-		kcalloc(buf_size, sizeof(struct sk_buff *), GFP_ATOMIC);
+		kcalloc(buf_size, sizeof(struct sk_buff *), GFP_KERNEL);
 	tid_agg_rx->reorder_time =
-		kcalloc(buf_size, sizeof(unsigned long), GFP_ATOMIC);
+		kcalloc(buf_size, sizeof(unsigned long), GFP_KERNEL);
 	if (!tid_agg_rx->reorder_buf || !tid_agg_rx->reorder_time) {
 #ifdef CONFIG_MAC80211_HT_DEBUG
 		if (net_ratelimit())
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index d4679b265ba..9cc472c6a6a 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -342,10 +342,11 @@ void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
 	/* send AddBA request */
 	ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
 				     tid_tx->dialog_token, start_seq_num,
-				     0x40, 5000);
+				     0x40, tid_tx->timeout);
 }
 
-int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
+int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid,
+				  u16 timeout)
 {
 	struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
@@ -420,6 +421,8 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
 	skb_queue_head_init(&tid_tx->pending);
 	__set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
 
+	tid_tx->timeout = timeout;
+
 	/* Tx timer */
 	tid_tx->addba_resp_timer.function = sta_addba_resp_timer_expired;
 	tid_tx->addba_resp_timer.data = (unsigned long)&sta->timer_to_tid[tid];
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 18bd0e55060..4bc8a9250cf 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -19,9 +19,10 @@
 #include "rate.h"
 #include "mesh.h"
 
-static int ieee80211_add_iface(struct wiphy *wiphy, char *name,
-			       enum nl80211_iftype type, u32 *flags,
-			       struct vif_params *params)
+static struct net_device *ieee80211_add_iface(struct wiphy *wiphy, char *name,
+					      enum nl80211_iftype type,
+					      u32 *flags,
+					      struct vif_params *params)
 {
 	struct ieee80211_local *local = wiphy_priv(wiphy);
 	struct net_device *dev;
@@ -29,12 +30,15 @@ static int ieee80211_add_iface(struct wiphy *wiphy, char *name,
 	int err;
 
 	err = ieee80211_if_add(local, name, &dev, type, params);
-	if (err || type != NL80211_IFTYPE_MONITOR || !flags)
-		return err;
+	if (err)
+		return ERR_PTR(err);
 
-	sdata = IEEE80211_DEV_TO_SUB_IF(dev);
-	sdata->u.mntr_flags = *flags;
-	return 0;
+	if (type == NL80211_IFTYPE_MONITOR && flags) {
+		sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+		sdata->u.mntr_flags = *flags;
+	}
+
+	return dev;
 }
 
 static int ieee80211_del_iface(struct wiphy *wiphy, struct net_device *dev)
@@ -56,11 +60,6 @@ static int ieee80211_change_iface(struct wiphy *wiphy,
 	if (ret)
 		return ret;
 
-	if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
-		ieee80211_sdata_set_mesh_id(sdata,
-					    params->mesh_id_len,
-					    params->mesh_id);
-
 	if (type == NL80211_IFTYPE_AP_VLAN &&
 	    params && params->use_4addr == 0)
 		rcu_assign_pointer(sdata->u.vlan.sta, NULL);
@@ -296,11 +295,12 @@ static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
 
 static int ieee80211_config_default_key(struct wiphy *wiphy,
 					struct net_device *dev,
-					u8 key_idx)
+					u8 key_idx, bool uni,
+					bool multi)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 
-	ieee80211_set_default_key(sdata, key_idx);
+	ieee80211_set_default_key(sdata, key_idx, uni, multi);
 
 	return 0;
 }
@@ -343,8 +343,9 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
 
 	if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) ||
 	    (sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) {
-		sinfo->filled |= STATION_INFO_SIGNAL;
+		sinfo->filled |= STATION_INFO_SIGNAL | STATION_INFO_SIGNAL_AVG;
 		sinfo->signal = (s8)sta->last_signal;
+		sinfo->signal_avg = (s8) -ewma_read(&sta->avg_signal);
 	}
 
 	sinfo->txrate.flags = 0;
@@ -983,7 +984,7 @@ static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
 	return 0;
 }
 
-static int ieee80211_get_mesh_params(struct wiphy *wiphy,
+static int ieee80211_get_mesh_config(struct wiphy *wiphy,
 				struct net_device *dev,
 				struct mesh_config *conf)
 {
@@ -999,9 +1000,39 @@ static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask)
 	return (mask >> (parm-1)) & 0x1;
 }
 
-static int ieee80211_set_mesh_params(struct wiphy *wiphy,
-				struct net_device *dev,
-				const struct mesh_config *nconf, u32 mask)
+static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
+		const struct mesh_setup *setup)
+{
+	u8 *new_ie;
+	const u8 *old_ie;
+
+	/* first allocate the new vendor information element */
+	new_ie = NULL;
+	old_ie = ifmsh->vendor_ie;
+
+	ifmsh->vendor_ie_len = setup->vendor_ie_len;
+	if (setup->vendor_ie_len) {
+		new_ie = kmemdup(setup->vendor_ie, setup->vendor_ie_len,
+				GFP_KERNEL);
+		if (!new_ie)
+			return -ENOMEM;
+	}
+
+	/* now copy the rest of the setup parameters */
+	ifmsh->mesh_id_len = setup->mesh_id_len;
+	memcpy(ifmsh->mesh_id, setup->mesh_id, ifmsh->mesh_id_len);
+	ifmsh->mesh_pp_id = setup->path_sel_proto;
+	ifmsh->mesh_pm_id = setup->path_metric;
+	ifmsh->vendor_ie = new_ie;
+
+	kfree(old_ie);
+
+	return 0;
+}
+
+static int ieee80211_update_mesh_config(struct wiphy *wiphy,
+					struct net_device *dev, u32 mask,
+					const struct mesh_config *nconf)
 {
 	struct mesh_config *conf;
 	struct ieee80211_sub_if_data *sdata;
@@ -1024,6 +1055,8 @@ static int ieee80211_set_mesh_params(struct wiphy *wiphy,
 		conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries;
 	if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask))
 		conf->dot11MeshTTL = nconf->dot11MeshTTL;
+	if (_chg_mesh_attr(NL80211_MESHCONF_ELEMENT_TTL, mask))
+		conf->dot11MeshTTL = nconf->element_ttl;
 	if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask))
 		conf->auto_open_plinks = nconf->auto_open_plinks;
 	if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask))
@@ -1050,6 +1083,31 @@ static int ieee80211_set_mesh_params(struct wiphy *wiphy,
 	return 0;
 }
 
+static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev,
+			       const struct mesh_config *conf,
+			       const struct mesh_setup *setup)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+	int err;
+
+	memcpy(&ifmsh->mshcfg, conf, sizeof(struct mesh_config));
+	err = copy_mesh_setup(ifmsh, setup);
+	if (err)
+		return err;
+	ieee80211_start_mesh(sdata);
+
+	return 0;
+}
+
+static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+
+	ieee80211_stop_mesh(sdata);
+
+	return 0;
+}
 #endif
 
 static int ieee80211_change_bss(struct wiphy *wiphy,
@@ -1108,6 +1166,12 @@ static int ieee80211_change_bss(struct wiphy *wiphy,
 			sdata->flags &= ~IEEE80211_SDATA_DONT_BRIDGE_PACKETS;
 	}
 
+	if (params->ht_opmode >= 0) {
+		sdata->vif.bss_conf.ht_operation_mode =
+			(u16) params->ht_opmode;
+		changed |= BSS_CHANGED_HT;
+	}
+
 	ieee80211_bss_info_change_notify(sdata, changed);
 
 	return 0;
@@ -1299,6 +1363,13 @@ static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
 	struct ieee80211_local *local = wiphy_priv(wiphy);
 	int err;
 
+	if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
+		err = drv_set_frag_threshold(local, wiphy->frag_threshold);
+
+		if (err)
+			return err;
+	}
+
 	if (changed & WIPHY_PARAM_COVERAGE_CLASS) {
 		err = drv_set_coverage_class(local, wiphy->coverage_class);
 
@@ -1522,6 +1593,37 @@ static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
 	return 0;
 }
 
+static int ieee80211_remain_on_channel_hw(struct ieee80211_local *local,
+					  struct net_device *dev,
+					  struct ieee80211_channel *chan,
+					  enum nl80211_channel_type chantype,
+					  unsigned int duration, u64 *cookie)
+{
+	int ret;
+	u32 random_cookie;
+
+	lockdep_assert_held(&local->mtx);
+
+	if (local->hw_roc_cookie)
+		return -EBUSY;
+	/* must be nonzero */
+	random_cookie = random32() | 1;
+
+	*cookie = random_cookie;
+	local->hw_roc_dev = dev;
+	local->hw_roc_cookie = random_cookie;
+	local->hw_roc_channel = chan;
+	local->hw_roc_channel_type = chantype;
+	local->hw_roc_duration = duration;
+	ret = drv_remain_on_channel(local, chan, chantype, duration);
+	if (ret) {
+		local->hw_roc_channel = NULL;
+		local->hw_roc_cookie = 0;
+	}
+
+	return ret;
+}
+
 static int ieee80211_remain_on_channel(struct wiphy *wiphy,
 				       struct net_device *dev,
 				       struct ieee80211_channel *chan,
@@ -1530,41 +1632,121 @@ static int ieee80211_remain_on_channel(struct wiphy *wiphy,
 				       u64 *cookie)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+
+	if (local->ops->remain_on_channel) {
+		int ret;
+
+		mutex_lock(&local->mtx);
+		ret = ieee80211_remain_on_channel_hw(local, dev,
+						     chan, channel_type,
+						     duration, cookie);
+		local->hw_roc_for_tx = false;
+		mutex_unlock(&local->mtx);
+
+		return ret;
+	}
 
 	return ieee80211_wk_remain_on_channel(sdata, chan, channel_type,
 					      duration, cookie);
 }
 
+static int ieee80211_cancel_remain_on_channel_hw(struct ieee80211_local *local,
+						 u64 cookie)
+{
+	int ret;
+
+	lockdep_assert_held(&local->mtx);
+
+	if (local->hw_roc_cookie != cookie)
+		return -ENOENT;
+
+	ret = drv_cancel_remain_on_channel(local);
+	if (ret)
+		return ret;
+
+	local->hw_roc_cookie = 0;
+	local->hw_roc_channel = NULL;
+
+	ieee80211_recalc_idle(local);
+
+	return 0;
+}
+
 static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy,
 					      struct net_device *dev,
 					      u64 cookie)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+
+	if (local->ops->cancel_remain_on_channel) {
+		int ret;
+
+		mutex_lock(&local->mtx);
+		ret = ieee80211_cancel_remain_on_channel_hw(local, cookie);
+		mutex_unlock(&local->mtx);
+
+		return ret;
+	}
 
 	return ieee80211_wk_cancel_remain_on_channel(sdata, cookie);
 }
 
+static enum work_done_result
+ieee80211_offchan_tx_done(struct ieee80211_work *wk, struct sk_buff *skb)
+{
+	/*
+	 * Use the data embedded in the work struct for reporting
+	 * here so if the driver mangled the SKB before dropping
+	 * it (which is the only way we really should get here)
+	 * then we don't report mangled data.
+	 *
+	 * If there was no wait time, then by the time we get here
+	 * the driver will likely not have reported the status yet,
+	 * so in that case userspace will have to deal with it.
+	 */
+
+	if (wk->offchan_tx.wait && wk->offchan_tx.frame)
+		cfg80211_mgmt_tx_status(wk->sdata->dev,
+					(unsigned long) wk->offchan_tx.frame,
+					wk->ie, wk->ie_len, false, GFP_KERNEL);
+
+	return WORK_DONE_DESTROY;
+}
+
 static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
-			     struct ieee80211_channel *chan,
+			     struct ieee80211_channel *chan, bool offchan,
 			     enum nl80211_channel_type channel_type,
-			     bool channel_type_valid,
+			     bool channel_type_valid, unsigned int wait,
 			     const u8 *buf, size_t len, u64 *cookie)
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff *skb;
 	struct sta_info *sta;
+	struct ieee80211_work *wk;
 	const struct ieee80211_mgmt *mgmt = (void *)buf;
 	u32 flags = IEEE80211_TX_INTFL_NL80211_FRAME_TX |
 		    IEEE80211_TX_CTL_REQ_TX_STATUS;
+	bool is_offchan = false;
 
 	/* Check that we are on the requested channel for transmission */
 	if (chan != local->tmp_channel &&
 	    chan != local->oper_channel)
-		return -EBUSY;
+		is_offchan = true;
 	if (channel_type_valid &&
 	    (channel_type != local->tmp_channel_type &&
 	     channel_type != local->_oper_channel_type))
+		is_offchan = true;
+
+	if (chan == local->hw_roc_channel) {
+		/* TODO: check channel type? */
+		is_offchan = false;
+		flags |= IEEE80211_TX_CTL_TX_OFFCHAN;
+	}
+
+	if (is_offchan && !offchan)
 		return -EBUSY;
 
 	switch (sdata->vif.type) {
@@ -1572,6 +1754,7 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
 	case NL80211_IFTYPE_AP:
 	case NL80211_IFTYPE_AP_VLAN:
 	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_MESH_POINT:
 		if (!ieee80211_is_action(mgmt->frame_control) ||
 		    mgmt->u.action.category == WLAN_CATEGORY_PUBLIC)
 			break;
@@ -1598,12 +1781,128 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
 	IEEE80211_SKB_CB(skb)->flags = flags;
 
 	skb->dev = sdata->dev;
-	ieee80211_tx_skb(sdata, skb);
 
 	*cookie = (unsigned long) skb;
+
+	if (is_offchan && local->ops->remain_on_channel) {
+		unsigned int duration;
+		int ret;
+
+		mutex_lock(&local->mtx);
+		/*
+		 * If the duration is zero, then the driver
+		 * wouldn't actually do anything. Set it to
+		 * 100 for now.
+		 *
+		 * TODO: cancel the off-channel operation
+		 *       when we get the SKB's TX status and
+		 *       the wait time was zero before.
+		 */
+		duration = 100;
+		if (wait)
+			duration = wait;
+		ret = ieee80211_remain_on_channel_hw(local, dev, chan,
+						     channel_type,
+						     duration, cookie);
+		if (ret) {
+			kfree_skb(skb);
+			mutex_unlock(&local->mtx);
+			return ret;
+		}
+
+		local->hw_roc_for_tx = true;
+		local->hw_roc_duration = wait;
+
+		/*
+		 * queue up frame for transmission after
+		 * ieee80211_ready_on_channel call
+		 */
+
+		/* modify cookie to prevent API mismatches */
+		*cookie ^= 2;
+		IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN;
+		local->hw_roc_skb = skb;
+		mutex_unlock(&local->mtx);
+
+		return 0;
+	}
+
+	/*
+	 * Can transmit right away if the channel was the
+	 * right one and there's no wait involved... If a
+	 * wait is involved, we might otherwise not be on
+	 * the right channel for long enough!
+	 */
+	if (!is_offchan && !wait && !sdata->vif.bss_conf.idle) {
+		ieee80211_tx_skb(sdata, skb);
+		return 0;
+	}
+
+	wk = kzalloc(sizeof(*wk) + len, GFP_KERNEL);
+	if (!wk) {
+		kfree_skb(skb);
+		return -ENOMEM;
+	}
+
+	wk->type = IEEE80211_WORK_OFFCHANNEL_TX;
+	wk->chan = chan;
+	wk->sdata = sdata;
+	wk->done = ieee80211_offchan_tx_done;
+	wk->offchan_tx.frame = skb;
+	wk->offchan_tx.wait = wait;
+	wk->ie_len = len;
+	memcpy(wk->ie, buf, len);
+
+	ieee80211_add_work(wk);
 	return 0;
 }
 
+static int ieee80211_mgmt_tx_cancel_wait(struct wiphy *wiphy,
+					 struct net_device *dev,
+					 u64 cookie)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_work *wk;
+	int ret = -ENOENT;
+
+	mutex_lock(&local->mtx);
+
+	if (local->ops->cancel_remain_on_channel) {
+		cookie ^= 2;
+		ret = ieee80211_cancel_remain_on_channel_hw(local, cookie);
+
+		if (ret == 0) {
+			kfree_skb(local->hw_roc_skb);
+			local->hw_roc_skb = NULL;
+		}
+
+		mutex_unlock(&local->mtx);
+
+		return ret;
+	}
+
+	list_for_each_entry(wk, &local->work_list, list) {
+		if (wk->sdata != sdata)
+			continue;
+
+		if (wk->type != IEEE80211_WORK_OFFCHANNEL_TX)
+			continue;
+
+		if (cookie != (unsigned long) wk->offchan_tx.frame)
+			continue;
+
+		wk->timeout = jiffies;
+
+		ieee80211_queue_work(&local->hw, &local->work_work);
+		ret = 0;
+		break;
+	}
+	mutex_unlock(&local->mtx);
+
+	return ret;
+}
+
 static void ieee80211_mgmt_frame_register(struct wiphy *wiphy,
 					  struct net_device *dev,
 					  u16 frame_type, bool reg)
@@ -1621,6 +1920,23 @@ static void ieee80211_mgmt_frame_register(struct wiphy *wiphy,
 	ieee80211_queue_work(&local->hw, &local->reconfig_filter);
 }
 
+static int ieee80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+
+	if (local->started)
+		return -EOPNOTSUPP;
+
+	return drv_set_antenna(local, tx_ant, rx_ant);
+}
+
+static int ieee80211_get_antenna(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant)
+{
+	struct ieee80211_local *local = wiphy_priv(wiphy);
+
+	return drv_get_antenna(local, tx_ant, rx_ant);
+}
+
 struct cfg80211_ops mac80211_config_ops = {
 	.add_virtual_intf = ieee80211_add_iface,
 	.del_virtual_intf = ieee80211_del_iface,
@@ -1645,8 +1961,10 @@ struct cfg80211_ops mac80211_config_ops = {
 	.change_mpath = ieee80211_change_mpath,
 	.get_mpath = ieee80211_get_mpath,
 	.dump_mpath = ieee80211_dump_mpath,
-	.set_mesh_params = ieee80211_set_mesh_params,
-	.get_mesh_params = ieee80211_get_mesh_params,
+	.update_mesh_config = ieee80211_update_mesh_config,
+	.get_mesh_config = ieee80211_get_mesh_config,
+	.join_mesh = ieee80211_join_mesh,
+	.leave_mesh = ieee80211_leave_mesh,
 #endif
 	.change_bss = ieee80211_change_bss,
 	.set_txq_params = ieee80211_set_txq_params,
@@ -1671,6 +1989,9 @@ struct cfg80211_ops mac80211_config_ops = {
 	.remain_on_channel = ieee80211_remain_on_channel,
 	.cancel_remain_on_channel = ieee80211_cancel_remain_on_channel,
 	.mgmt_tx = ieee80211_mgmt_tx,
+	.mgmt_tx_cancel_wait = ieee80211_mgmt_tx_cancel_wait,
 	.set_cqm_rssi_config = ieee80211_set_cqm_rssi_config,
 	.mgmt_frame_register = ieee80211_mgmt_frame_register,
+	.set_antenna = ieee80211_set_antenna,
+	.get_antenna = ieee80211_get_antenna,
 };
diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c
index 18260aa99c5..1f02e599a31 100644
--- a/net/mac80211/debugfs.c
+++ b/net/mac80211/debugfs.c
@@ -21,16 +21,30 @@ int mac80211_open_file_generic(struct inode *inode, struct file *file)
 	return 0;
 }
 
-#define DEBUGFS_READONLY_FILE(name, buflen, fmt, value...)		\
+#define DEBUGFS_FORMAT_BUFFER_SIZE 100
+
+int mac80211_format_buffer(char __user *userbuf, size_t count,
+				  loff_t *ppos, char *fmt, ...)
+{
+	va_list args;
+	char buf[DEBUGFS_FORMAT_BUFFER_SIZE];
+	int res;
+
+	va_start(args, fmt);
+	res = vscnprintf(buf, sizeof(buf), fmt, args);
+	va_end(args);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+}
+
+#define DEBUGFS_READONLY_FILE(name, fmt, value...)			\
 static ssize_t name## _read(struct file *file, char __user *userbuf,	\
 			    size_t count, loff_t *ppos)			\
 {									\
 	struct ieee80211_local *local = file->private_data;		\
-	char buf[buflen];						\
-	int res;							\
 									\
-	res = scnprintf(buf, buflen, fmt "\n", ##value);		\
-	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+	return mac80211_format_buffer(userbuf, count, ppos, 		\
+				      fmt "\n", ##value);		\
 }									\
 									\
 static const struct file_operations name## _ops = {			\
@@ -46,13 +60,13 @@ static const struct file_operations name## _ops = {			\
 	debugfs_create_file(#name, mode, phyd, local, &name## _ops);
 
 
-DEBUGFS_READONLY_FILE(frequency, 20, "%d",
+DEBUGFS_READONLY_FILE(frequency, "%d",
 		      local->hw.conf.channel->center_freq);
-DEBUGFS_READONLY_FILE(total_ps_buffered, 20, "%d",
+DEBUGFS_READONLY_FILE(total_ps_buffered, "%d",
 		      local->total_ps_buffered);
-DEBUGFS_READONLY_FILE(wep_iv, 20, "%#08x",
+DEBUGFS_READONLY_FILE(wep_iv, "%#08x",
 		      local->wep_iv & 0xffffff);
-DEBUGFS_READONLY_FILE(rate_ctrl_alg, 100, "%s",
+DEBUGFS_READONLY_FILE(rate_ctrl_alg, "%s",
 	local->rate_ctrl ? local->rate_ctrl->ops->name : "hw/driver");
 
 static ssize_t tsf_read(struct file *file, char __user *user_buf,
@@ -60,13 +74,11 @@ static ssize_t tsf_read(struct file *file, char __user *user_buf,
 {
 	struct ieee80211_local *local = file->private_data;
 	u64 tsf;
-	char buf[100];
 
 	tsf = drv_get_tsf(local);
 
-	snprintf(buf, sizeof(buf), "0x%016llx\n", (unsigned long long) tsf);
-
-	return simple_read_from_buffer(user_buf, count, ppos, buf, 19);
+	return mac80211_format_buffer(user_buf, count, ppos, "0x%016llx\n",
+				      (unsigned long long) tsf);
 }
 
 static ssize_t tsf_write(struct file *file,
@@ -131,12 +143,9 @@ static ssize_t noack_read(struct file *file, char __user *user_buf,
 			  size_t count, loff_t *ppos)
 {
 	struct ieee80211_local *local = file->private_data;
-	int res;
-	char buf[10];
 
-	res = scnprintf(buf, sizeof(buf), "%d\n", local->wifi_wme_noack_test);
-
-	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+	return mac80211_format_buffer(user_buf, count, ppos, "%d\n",
+				      local->wifi_wme_noack_test);
 }
 
 static ssize_t noack_write(struct file *file,
@@ -168,12 +177,8 @@ static ssize_t uapsd_queues_read(struct file *file, char __user *user_buf,
 				 size_t count, loff_t *ppos)
 {
 	struct ieee80211_local *local = file->private_data;
-	int res;
-	char buf[10];
-
-	res = scnprintf(buf, sizeof(buf), "0x%x\n", local->uapsd_queues);
-
-	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+	return mac80211_format_buffer(user_buf, count, ppos, "0x%x\n",
+				      local->uapsd_queues);
 }
 
 static ssize_t uapsd_queues_write(struct file *file,
@@ -215,12 +220,9 @@ static ssize_t uapsd_max_sp_len_read(struct file *file, char __user *user_buf,
 				     size_t count, loff_t *ppos)
 {
 	struct ieee80211_local *local = file->private_data;
-	int res;
-	char buf[10];
 
-	res = scnprintf(buf, sizeof(buf), "0x%x\n", local->uapsd_max_sp_len);
-
-	return simple_read_from_buffer(user_buf, count, ppos, buf, res);
+	return mac80211_format_buffer(user_buf, count, ppos, "0x%x\n",
+				      local->uapsd_max_sp_len);
 }
 
 static ssize_t uapsd_max_sp_len_write(struct file *file,
diff --git a/net/mac80211/debugfs.h b/net/mac80211/debugfs.h
index 09cc9be3479..7c87529630f 100644
--- a/net/mac80211/debugfs.h
+++ b/net/mac80211/debugfs.h
@@ -4,6 +4,8 @@
 #ifdef CONFIG_MAC80211_DEBUGFS
 extern void debugfs_hw_add(struct ieee80211_local *local);
 extern int mac80211_open_file_generic(struct inode *inode, struct file *file);
+extern int mac80211_format_buffer(char __user *userbuf, size_t count,
+				  loff_t *ppos, char *fmt, ...);
 #else
 static inline void debugfs_hw_add(struct ieee80211_local *local)
 {
diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index 1243d1db5c5..f7ef3477c24 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -15,18 +15,17 @@
 #include "debugfs.h"
 #include "debugfs_key.h"
 
-#define KEY_READ(name, prop, buflen, format_string)			\
+#define KEY_READ(name, prop, format_string)				\
 static ssize_t key_##name##_read(struct file *file,			\
 				 char __user *userbuf,			\
 				 size_t count, loff_t *ppos)		\
 {									\
-	char buf[buflen];						\
 	struct ieee80211_key *key = file->private_data;			\
-	int res = scnprintf(buf, buflen, format_string, key->prop);	\
-	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+	return mac80211_format_buffer(userbuf, count, ppos, 		\
+				      format_string, key->prop);	\
 }
-#define KEY_READ_D(name) KEY_READ(name, name, 20, "%d\n")
-#define KEY_READ_X(name) KEY_READ(name, name, 20, "0x%x\n")
+#define KEY_READ_D(name) KEY_READ(name, name, "%d\n")
+#define KEY_READ_X(name) KEY_READ(name, name, "0x%x\n")
 
 #define KEY_OPS(name)							\
 static const struct file_operations key_ ##name## _ops = {		\
@@ -39,9 +38,9 @@ static const struct file_operations key_ ##name## _ops = {		\
 		 KEY_READ_##format(name)				\
 		 KEY_OPS(name)
 
-#define KEY_CONF_READ(name, buflen, format_string)			\
-	KEY_READ(conf_##name, conf.name, buflen, format_string)
-#define KEY_CONF_READ_D(name) KEY_CONF_READ(name, 20, "%d\n")
+#define KEY_CONF_READ(name, format_string)				\
+	KEY_READ(conf_##name, conf.name, format_string)
+#define KEY_CONF_READ_D(name) KEY_CONF_READ(name, "%d\n")
 
 #define KEY_CONF_OPS(name)						\
 static const struct file_operations key_ ##name## _ops = {		\
@@ -59,7 +58,7 @@ KEY_CONF_FILE(keyidx, D);
 KEY_CONF_FILE(hw_key_idx, D);
 KEY_FILE(flags, X);
 KEY_FILE(tx_rx_count, D);
-KEY_READ(ifindex, sdata->name, IFNAMSIZ + 2, "%s\n");
+KEY_READ(ifindex, sdata->name, "%s\n");
 KEY_OPS(ifindex);
 
 static ssize_t key_algorithm_read(struct file *file,
@@ -275,7 +274,8 @@ void ieee80211_debugfs_key_remove(struct ieee80211_key *key)
 	debugfs_remove_recursive(key->debugfs.dir);
 	key->debugfs.dir = NULL;
 }
-void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata)
+
+void ieee80211_debugfs_key_update_default(struct ieee80211_sub_if_data *sdata)
 {
 	char buf[50];
 	struct ieee80211_key *key;
@@ -283,25 +283,29 @@ void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata)
 	if (!sdata->debugfs.dir)
 		return;
 
-	/* this is running under the key lock */
+	lockdep_assert_held(&sdata->local->key_mtx);
 
-	key = sdata->default_key;
-	if (key) {
+	if (sdata->default_unicast_key) {
+		key = sdata->default_unicast_key;
 		sprintf(buf, "../keys/%d", key->debugfs.cnt);
-		sdata->debugfs.default_key =
-			debugfs_create_symlink("default_key",
+		sdata->debugfs.default_unicast_key =
+			debugfs_create_symlink("default_unicast_key",
 					       sdata->debugfs.dir, buf);
-	} else
-		ieee80211_debugfs_key_remove_default(sdata);
-}
-
-void ieee80211_debugfs_key_remove_default(struct ieee80211_sub_if_data *sdata)
-{
-	if (!sdata)
-		return;
+	} else {
+		debugfs_remove(sdata->debugfs.default_unicast_key);
+		sdata->debugfs.default_unicast_key = NULL;
+	}
 
-	debugfs_remove(sdata->debugfs.default_key);
-	sdata->debugfs.default_key = NULL;
+	if (sdata->default_multicast_key) {
+		key = sdata->default_multicast_key;
+		sprintf(buf, "../keys/%d", key->debugfs.cnt);
+		sdata->debugfs.default_multicast_key =
+			debugfs_create_symlink("default_multicast_key",
+					       sdata->debugfs.dir, buf);
+	} else {
+		debugfs_remove(sdata->debugfs.default_multicast_key);
+		sdata->debugfs.default_multicast_key = NULL;
+	}
 }
 
 void ieee80211_debugfs_key_add_mgmt_default(struct ieee80211_sub_if_data *sdata)
diff --git a/net/mac80211/debugfs_key.h b/net/mac80211/debugfs_key.h
index 54717b4e137..32adc77e9c7 100644
--- a/net/mac80211/debugfs_key.h
+++ b/net/mac80211/debugfs_key.h
@@ -4,8 +4,7 @@
 #ifdef CONFIG_MAC80211_DEBUGFS
 void ieee80211_debugfs_key_add(struct ieee80211_key *key);
 void ieee80211_debugfs_key_remove(struct ieee80211_key *key);
-void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata);
-void ieee80211_debugfs_key_remove_default(struct ieee80211_sub_if_data *sdata);
+void ieee80211_debugfs_key_update_default(struct ieee80211_sub_if_data *sdata);
 void ieee80211_debugfs_key_add_mgmt_default(
 	struct ieee80211_sub_if_data *sdata);
 void ieee80211_debugfs_key_remove_mgmt_default(
@@ -17,10 +16,7 @@ static inline void ieee80211_debugfs_key_add(struct ieee80211_key *key)
 {}
 static inline void ieee80211_debugfs_key_remove(struct ieee80211_key *key)
 {}
-static inline void ieee80211_debugfs_key_add_default(
-	struct ieee80211_sub_if_data *sdata)
-{}
-static inline void ieee80211_debugfs_key_remove_default(
+static inline void ieee80211_debugfs_key_update_default(
 	struct ieee80211_sub_if_data *sdata)
 {}
 static inline void ieee80211_debugfs_key_add_mgmt_default(
diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index cbdf36d7841..2dabdf7680d 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -251,6 +251,7 @@ IEEE80211_IF_FILE(dot11MeshConfirmTimeout,
 IEEE80211_IF_FILE(dot11MeshHoldingTimeout,
 		u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC);
 IEEE80211_IF_FILE(dot11MeshTTL, u.mesh.mshcfg.dot11MeshTTL, DEC);
+IEEE80211_IF_FILE(element_ttl, u.mesh.mshcfg.element_ttl, DEC);
 IEEE80211_IF_FILE(auto_open_plinks, u.mesh.mshcfg.auto_open_plinks, DEC);
 IEEE80211_IF_FILE(dot11MeshMaxPeerLinks,
 		u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC);
@@ -355,6 +356,7 @@ static void add_mesh_config(struct ieee80211_sub_if_data *sdata)
 	MESHPARAMS_ADD(dot11MeshConfirmTimeout);
 	MESHPARAMS_ADD(dot11MeshHoldingTimeout);
 	MESHPARAMS_ADD(dot11MeshTTL);
+	MESHPARAMS_ADD(element_ttl);
 	MESHPARAMS_ADD(auto_open_plinks);
 	MESHPARAMS_ADD(dot11MeshMaxPeerLinks);
 	MESHPARAMS_ADD(dot11MeshHWMPactivePathTimeout);
diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c
index 4601fea1784..c04a1396cf8 100644
--- a/net/mac80211/debugfs_sta.c
+++ b/net/mac80211/debugfs_sta.c
@@ -17,20 +17,18 @@
 
 /* sta attributtes */
 
-#define STA_READ(name, buflen, field, format_string)			\
+#define STA_READ(name, field, format_string)				\
 static ssize_t sta_ ##name## _read(struct file *file,			\
 				   char __user *userbuf,		\
 				   size_t count, loff_t *ppos)		\
 {									\
-	int res;							\
 	struct sta_info *sta = file->private_data;			\
-	char buf[buflen];						\
-	res = scnprintf(buf, buflen, format_string, sta->field);	\
-	return simple_read_from_buffer(userbuf, count, ppos, buf, res);	\
+	return mac80211_format_buffer(userbuf, count, ppos, 		\
+				      format_string, sta->field);	\
 }
-#define STA_READ_D(name, field) STA_READ(name, 20, field, "%d\n")
-#define STA_READ_U(name, field) STA_READ(name, 20, field, "%u\n")
-#define STA_READ_S(name, field) STA_READ(name, 20, field, "%s\n")
+#define STA_READ_D(name, field) STA_READ(name, field, "%d\n")
+#define STA_READ_U(name, field) STA_READ(name, field, "%u\n")
+#define STA_READ_S(name, field) STA_READ(name, field, "%s\n")
 
 #define STA_OPS(name)							\
 static const struct file_operations sta_ ##name## _ops = {		\
@@ -79,22 +77,18 @@ static ssize_t sta_num_ps_buf_frames_read(struct file *file,
 					  char __user *userbuf,
 					  size_t count, loff_t *ppos)
 {
-	char buf[20];
 	struct sta_info *sta = file->private_data;
-	int res = scnprintf(buf, sizeof(buf), "%u\n",
-			    skb_queue_len(&sta->ps_tx_buf));
-	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+	return mac80211_format_buffer(userbuf, count, ppos, "%u\n",
+				      skb_queue_len(&sta->ps_tx_buf));
 }
 STA_OPS(num_ps_buf_frames);
 
 static ssize_t sta_inactive_ms_read(struct file *file, char __user *userbuf,
 				    size_t count, loff_t *ppos)
 {
-	char buf[20];
 	struct sta_info *sta = file->private_data;
-	int res = scnprintf(buf, sizeof(buf), "%d\n",
-			    jiffies_to_msecs(jiffies - sta->last_rx));
-	return simple_read_from_buffer(userbuf, count, ppos, buf, res);
+	return mac80211_format_buffer(userbuf, count, ppos, "%d\n",
+				      jiffies_to_msecs(jiffies - sta->last_rx));
 }
 STA_OPS(inactive_ms);
 
@@ -118,34 +112,35 @@ static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf,
 	char buf[71 + STA_TID_NUM * 40], *p = buf;
 	int i;
 	struct sta_info *sta = file->private_data;
+	struct tid_ampdu_rx *tid_rx;
+	struct tid_ampdu_tx *tid_tx;
+
+	rcu_read_lock();
 
-	spin_lock_bh(&sta->lock);
 	p += scnprintf(p, sizeof(buf) + buf - p, "next dialog_token: %#02x\n",
 			sta->ampdu_mlme.dialog_token_allocator + 1);
 	p += scnprintf(p, sizeof(buf) + buf - p,
 		       "TID\t\tRX active\tDTKN\tSSN\t\tTX\tDTKN\tpending\n");
+
 	for (i = 0; i < STA_TID_NUM; i++) {
+		tid_rx = rcu_dereference(sta->ampdu_mlme.tid_rx[i]);
+		tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[i]);
+
 		p += scnprintf(p, sizeof(buf) + buf - p, "%02d", i);
-		p += scnprintf(p, sizeof(buf) + buf - p, "\t\t%x",
-				!!sta->ampdu_mlme.tid_rx[i]);
+		p += scnprintf(p, sizeof(buf) + buf - p, "\t\t%x", !!tid_rx);
 		p += scnprintf(p, sizeof(buf) + buf - p, "\t%#.2x",
-				sta->ampdu_mlme.tid_rx[i] ?
-				sta->ampdu_mlme.tid_rx[i]->dialog_token : 0);
+				tid_rx ? tid_rx->dialog_token : 0);
 		p += scnprintf(p, sizeof(buf) + buf - p, "\t%#.3x",
-				sta->ampdu_mlme.tid_rx[i] ?
-				sta->ampdu_mlme.tid_rx[i]->ssn : 0);
+				tid_rx ? tid_rx->ssn : 0);
 
-		p += scnprintf(p, sizeof(buf) + buf - p, "\t\t%x",
-				!!sta->ampdu_mlme.tid_tx[i]);
+		p += scnprintf(p, sizeof(buf) + buf - p, "\t\t%x", !!tid_tx);
 		p += scnprintf(p, sizeof(buf) + buf - p, "\t%#.2x",
-				sta->ampdu_mlme.tid_tx[i] ?
-				sta->ampdu_mlme.tid_tx[i]->dialog_token : 0);
+				tid_tx ? tid_tx->dialog_token : 0);
 		p += scnprintf(p, sizeof(buf) + buf - p, "\t%03d",
-				sta->ampdu_mlme.tid_tx[i] ?
-				skb_queue_len(&sta->ampdu_mlme.tid_tx[i]->pending) : 0);
+				tid_tx ? skb_queue_len(&tid_tx->pending) : 0);
 		p += scnprintf(p, sizeof(buf) + buf - p, "\n");
 	}
-	spin_unlock_bh(&sta->lock);
+	rcu_read_unlock();
 
 	return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf);
 }
@@ -194,7 +189,7 @@ static ssize_t sta_agg_status_write(struct file *file, const char __user *userbu
 
 	if (tx) {
 		if (start)
-			ret = ieee80211_start_tx_ba_session(&sta->sta, tid);
+			ret = ieee80211_start_tx_ba_session(&sta->sta, tid, 5000);
 		else
 			ret = ieee80211_stop_tx_ba_session(&sta->sta, tid);
 	} else {
diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h
index 16983825f8e..98d589960a4 100644
--- a/net/mac80211/driver-ops.h
+++ b/net/mac80211/driver-ops.h
@@ -233,6 +233,20 @@ static inline void drv_get_tkip_seq(struct ieee80211_local *local,
 	trace_drv_get_tkip_seq(local, hw_key_idx, iv32, iv16);
 }
 
+static inline int drv_set_frag_threshold(struct ieee80211_local *local,
+					u32 value)
+{
+	int ret = 0;
+
+	might_sleep();
+
+	trace_drv_set_frag_threshold(local, value);
+	if (local->ops->set_frag_threshold)
+		ret = local->ops->set_frag_threshold(&local->hw, value);
+	trace_drv_return_int(local, ret);
+	return ret;
+}
+
 static inline int drv_set_rts_threshold(struct ieee80211_local *local,
 					u32 value)
 {
@@ -353,7 +367,7 @@ static inline void drv_reset_tsf(struct ieee80211_local *local)
 
 static inline int drv_tx_last_beacon(struct ieee80211_local *local)
 {
-	int ret = 1;
+	int ret = 0; /* default unsuported op for less congestion */
 
 	might_sleep();
 
@@ -428,4 +442,57 @@ static inline void drv_channel_switch(struct ieee80211_local *local,
 	trace_drv_return_void(local);
 }
 
+
+static inline int drv_set_antenna(struct ieee80211_local *local,
+				  u32 tx_ant, u32 rx_ant)
+{
+	int ret = -EOPNOTSUPP;
+	might_sleep();
+	if (local->ops->set_antenna)
+		ret = local->ops->set_antenna(&local->hw, tx_ant, rx_ant);
+	trace_drv_set_antenna(local, tx_ant, rx_ant, ret);
+	return ret;
+}
+
+static inline int drv_get_antenna(struct ieee80211_local *local,
+				  u32 *tx_ant, u32 *rx_ant)
+{
+	int ret = -EOPNOTSUPP;
+	might_sleep();
+	if (local->ops->get_antenna)
+		ret = local->ops->get_antenna(&local->hw, tx_ant, rx_ant);
+	trace_drv_get_antenna(local, *tx_ant, *rx_ant, ret);
+	return ret;
+}
+
+static inline int drv_remain_on_channel(struct ieee80211_local *local,
+					struct ieee80211_channel *chan,
+					enum nl80211_channel_type chantype,
+					unsigned int duration)
+{
+	int ret;
+
+	might_sleep();
+
+	trace_drv_remain_on_channel(local, chan, chantype, duration);
+	ret = local->ops->remain_on_channel(&local->hw, chan, chantype,
+					    duration);
+	trace_drv_return_int(local, ret);
+
+	return ret;
+}
+
+static inline int drv_cancel_remain_on_channel(struct ieee80211_local *local)
+{
+	int ret;
+
+	might_sleep();
+
+	trace_drv_cancel_remain_on_channel(local);
+	ret = local->ops->cancel_remain_on_channel(&local->hw);
+	trace_drv_return_int(local, ret);
+
+	return ret;
+}
+
 #endif /* __MAC80211_DRIVER_OPS */
diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h
index 6831fb1641c..49c84218b2f 100644
--- a/net/mac80211/driver-trace.h
+++ b/net/mac80211/driver-trace.h
@@ -531,6 +531,27 @@ TRACE_EVENT(drv_get_tkip_seq,
 	)
 );
 
+TRACE_EVENT(drv_set_frag_threshold,
+	TP_PROTO(struct ieee80211_local *local, u32 value),
+
+	TP_ARGS(local, value),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, value)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->value = value;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " value:%d",
+		LOCAL_PR_ARG, __entry->value
+	)
+);
+
 TRACE_EVENT(drv_set_rts_threshold,
 	TP_PROTO(struct ieee80211_local *local, u32 value),
 
@@ -862,6 +883,100 @@ TRACE_EVENT(drv_channel_switch,
 	)
 );
 
+TRACE_EVENT(drv_set_antenna,
+	TP_PROTO(struct ieee80211_local *local, u32 tx_ant, u32 rx_ant, int ret),
+
+	TP_ARGS(local, tx_ant, rx_ant, ret),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, tx_ant)
+		__field(u32, rx_ant)
+		__field(int, ret)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->tx_ant = tx_ant;
+		__entry->rx_ant = rx_ant;
+		__entry->ret = ret;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " tx_ant:%d rx_ant:%d ret:%d",
+		LOCAL_PR_ARG, __entry->tx_ant, __entry->rx_ant, __entry->ret
+	)
+);
+
+TRACE_EVENT(drv_get_antenna,
+	TP_PROTO(struct ieee80211_local *local, u32 tx_ant, u32 rx_ant, int ret),
+
+	TP_ARGS(local, tx_ant, rx_ant, ret),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(u32, tx_ant)
+		__field(u32, rx_ant)
+		__field(int, ret)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->tx_ant = tx_ant;
+		__entry->rx_ant = rx_ant;
+		__entry->ret = ret;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " tx_ant:%d rx_ant:%d ret:%d",
+		LOCAL_PR_ARG, __entry->tx_ant, __entry->rx_ant, __entry->ret
+	)
+);
+
+TRACE_EVENT(drv_remain_on_channel,
+	TP_PROTO(struct ieee80211_local *local, struct ieee80211_channel *chan,
+		 enum nl80211_channel_type chantype, unsigned int duration),
+
+	TP_ARGS(local, chan, chantype, duration),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+		__field(int, center_freq)
+		__field(int, channel_type)
+		__field(unsigned int, duration)
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+		__entry->center_freq = chan->center_freq;
+		__entry->channel_type = chantype;
+		__entry->duration = duration;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT " freq:%dMHz duration:%dms",
+		LOCAL_PR_ARG, __entry->center_freq, __entry->duration
+	)
+);
+
+TRACE_EVENT(drv_cancel_remain_on_channel,
+	TP_PROTO(struct ieee80211_local *local),
+
+	TP_ARGS(local),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT, LOCAL_PR_ARG
+	)
+);
+
 /*
  * Tracing for API calls that drivers call.
  */
@@ -1099,6 +1214,42 @@ TRACE_EVENT(api_chswitch_done,
 	)
 );
 
+TRACE_EVENT(api_ready_on_channel,
+	TP_PROTO(struct ieee80211_local *local),
+
+	TP_ARGS(local),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT, LOCAL_PR_ARG
+	)
+);
+
+TRACE_EVENT(api_remain_on_channel_expired,
+	TP_PROTO(struct ieee80211_local *local),
+
+	TP_ARGS(local),
+
+	TP_STRUCT__entry(
+		LOCAL_ENTRY
+	),
+
+	TP_fast_assign(
+		LOCAL_ASSIGN;
+	),
+
+	TP_printk(
+		LOCAL_PR_FMT, LOCAL_PR_ARG
+	)
+);
+
 /*
  * Tracing for internal functions
  * (which may also be called in response to driver calls)
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 239c4836a94..53c7077ffd4 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -780,6 +780,9 @@ void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 
 	mutex_lock(&sdata->u.ibss.mtx);
 
+	if (!sdata->u.ibss.ssid_len)
+		goto mgmt_out; /* not ready to merge yet */
+
 	switch (fc & IEEE80211_FCTL_STYPE) {
 	case IEEE80211_STYPE_PROBE_REQ:
 		ieee80211_rx_mgmt_probe_req(sdata, mgmt, skb->len);
@@ -797,6 +800,7 @@ void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 		break;
 	}
 
+ mgmt_out:
 	mutex_unlock(&sdata->u.ibss.mtx);
 }
 
@@ -915,6 +919,8 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata,
 
 	sdata->u.ibss.privacy = params->privacy;
 	sdata->u.ibss.basic_rates = params->basic_rates;
+	memcpy(sdata->vif.bss_conf.mcast_rate, params->mcast_rate,
+	       sizeof(params->mcast_rate));
 
 	sdata->vif.bss_conf.beacon_int = params->beacon_interval;
 
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index b80c3868992..c47d7c0e48a 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -23,6 +23,7 @@
 #include <linux/types.h>
 #include <linux/spinlock.h>
 #include <linux/etherdevice.h>
+#include <linux/leds.h>
 #include <net/ieee80211_radiotap.h>
 #include <net/cfg80211.h>
 #include <net/mac80211.h>
@@ -167,6 +168,7 @@ typedef unsigned __bitwise__ ieee80211_rx_result;
  * @IEEE80211_RX_FRAGMENTED: fragmented frame
  * @IEEE80211_RX_AMSDU: a-MSDU packet
  * @IEEE80211_RX_MALFORMED_ACTION_FRM: action frame is malformed
+ * @IEEE80211_RX_DEFERRED_RELEASE: frame was subjected to receive reordering
  *
  * These are per-frame flags that are attached to a frame in the
  * @rx_flags field of &struct ieee80211_rx_status.
@@ -177,6 +179,7 @@ enum ieee80211_packet_rx_flags {
 	IEEE80211_RX_FRAGMENTED			= BIT(2),
 	IEEE80211_RX_AMSDU			= BIT(3),
 	IEEE80211_RX_MALFORMED_ACTION_FRM	= BIT(4),
+	IEEE80211_RX_DEFERRED_RELEASE		= BIT(5),
 };
 
 /**
@@ -260,6 +263,7 @@ enum ieee80211_work_type {
 	IEEE80211_WORK_ASSOC_BEACON_WAIT,
 	IEEE80211_WORK_ASSOC,
 	IEEE80211_WORK_REMAIN_ON_CHANNEL,
+	IEEE80211_WORK_OFFCHANNEL_TX,
 };
 
 /**
@@ -320,6 +324,10 @@ struct ieee80211_work {
 		struct {
 			u32 duration;
 		} remain;
+		struct {
+			struct sk_buff *frame;
+			u32 wait;
+		} offchan_tx;
 	};
 
 	int ie_len;
@@ -349,8 +357,10 @@ struct ieee80211_if_managed {
 	struct work_struct chswitch_work;
 	struct work_struct beacon_connection_loss_work;
 
+	unsigned long beacon_timeout;
 	unsigned long probe_timeout;
 	int probe_send_count;
+	bool nullfunc_failed;
 
 	struct mutex mtx;
 	struct cfg80211_bss *associated;
@@ -477,6 +487,8 @@ struct ieee80211_if_mesh {
 	struct mesh_config mshcfg;
 	u32 mesh_seqnum;
 	bool accepting_plinks;
+	const u8 *vendor_ie;
+	u8 vendor_ie_len;
 };
 
 #ifdef CONFIG_MAC80211_MESH
@@ -550,7 +562,7 @@ struct ieee80211_sub_if_data {
 	unsigned int fragment_next;
 
 	struct ieee80211_key *keys[NUM_DEFAULT_KEYS + NUM_DEFAULT_MGMT_KEYS];
-	struct ieee80211_key *default_key;
+	struct ieee80211_key *default_unicast_key, *default_multicast_key;
 	struct ieee80211_key *default_mgmt_key;
 
 	u16 sequence_number;
@@ -578,9 +590,7 @@ struct ieee80211_sub_if_data {
 		struct ieee80211_if_vlan vlan;
 		struct ieee80211_if_managed mgd;
 		struct ieee80211_if_ibss ibss;
-#ifdef CONFIG_MAC80211_MESH
 		struct ieee80211_if_mesh mesh;
-#endif
 		u32 mntr_flags;
 	} u;
 
@@ -588,7 +598,8 @@ struct ieee80211_sub_if_data {
 	struct {
 		struct dentry *dir;
 		struct dentry *subdir_stations;
-		struct dentry *default_key;
+		struct dentry *default_unicast_key;
+		struct dentry *default_multicast_key;
 		struct dentry *default_mgmt_key;
 	} debugfs;
 #endif
@@ -602,19 +613,6 @@ struct ieee80211_sub_if_data *vif_to_sdata(struct ieee80211_vif *p)
 	return container_of(p, struct ieee80211_sub_if_data, vif);
 }
 
-static inline void
-ieee80211_sdata_set_mesh_id(struct ieee80211_sub_if_data *sdata,
-			    u8 mesh_id_len, u8 *mesh_id)
-{
-#ifdef CONFIG_MAC80211_MESH
-	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
-	ifmsh->mesh_id_len = mesh_id_len;
-	memcpy(ifmsh->mesh_id, mesh_id, mesh_id_len);
-#else
-	WARN_ON(1);
-#endif
-}
-
 enum sdata_queue_type {
 	IEEE80211_SDATA_QUEUE_TYPE_FRAME	= 0,
 	IEEE80211_SDATA_QUEUE_AGG_START		= 1,
@@ -635,6 +633,20 @@ enum queue_stop_reason {
 	IEEE80211_QUEUE_STOP_REASON_SKB_ADD,
 };
 
+#ifdef CONFIG_MAC80211_LEDS
+struct tpt_led_trigger {
+	struct led_trigger trig;
+	char name[32];
+	const struct ieee80211_tpt_blink *blink_table;
+	unsigned int blink_table_len;
+	struct timer_list timer;
+	unsigned long prev_traffic;
+	unsigned long tx_bytes, rx_bytes;
+	unsigned int active, want;
+	bool running;
+};
+#endif
+
 /**
  * mac80211 scan flags - currently active scan mode
  *
@@ -764,6 +776,15 @@ struct ieee80211_local {
 	struct sk_buff_head skb_queue;
 	struct sk_buff_head skb_queue_unreliable;
 
+	/*
+	 * Internal FIFO queue which is shared between multiple rx path
+	 * stages. Its main task is to provide a serialization mechanism,
+	 * so all rx handlers can enjoy having exclusive access to their
+	 * private data structures.
+	 */
+	struct sk_buff_head rx_skb_queue;
+	bool running_rx_handler;	/* protected by rx_skb_queue.lock */
+
 	/* Station data */
 	/*
 	 * The mutex only protects the list and counter,
@@ -843,6 +864,7 @@ struct ieee80211_local {
 #ifdef CONFIG_MAC80211_LEDS
 	int tx_led_counter, rx_led_counter;
 	struct led_trigger *tx_led, *rx_led, *assoc_led, *radio_led;
+	struct tpt_led_trigger *tpt_led_trigger;
 	char tx_led_name[32], rx_led_name[32],
 	     assoc_led_name[32], radio_led_name[32];
 #endif
@@ -929,6 +951,15 @@ struct ieee80211_local {
 	} debugfs;
 #endif
 
+	struct ieee80211_channel *hw_roc_channel;
+	struct net_device *hw_roc_dev;
+	struct sk_buff *hw_roc_skb;
+	struct work_struct hw_roc_start, hw_roc_done;
+	enum nl80211_channel_type hw_roc_channel_type;
+	unsigned int hw_roc_duration;
+	u32 hw_roc_cookie;
+	bool hw_roc_for_tx;
+
 	/* dummy netdev for use w/ NAPI */
 	struct net_device napi_dev;
 
@@ -1120,6 +1151,7 @@ void ieee80211_offchannel_stop_beaconing(struct ieee80211_local *local);
 void ieee80211_offchannel_stop_station(struct ieee80211_local *local);
 void ieee80211_offchannel_return(struct ieee80211_local *local,
 				 bool enable_beaconing);
+void ieee80211_hw_roc_setup(struct ieee80211_local *local);
 
 /* interface handling */
 int ieee80211_iface_init(void);
@@ -1264,6 +1296,8 @@ void ieee80211_send_nullfunc(struct ieee80211_local *local,
 			     int powersave);
 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
 			     struct ieee80211_hdr *hdr);
+void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
+			     struct ieee80211_hdr *hdr, bool ack);
 void ieee80211_beacon_connection_loss_work(struct work_struct *work);
 
 void ieee80211_wake_queues_by_reason(struct ieee80211_hw *hw,
@@ -1278,6 +1312,9 @@ void ieee80211_add_pending_skb(struct ieee80211_local *local,
 			       struct sk_buff *skb);
 int ieee80211_add_pending_skbs(struct ieee80211_local *local,
 			       struct sk_buff_head *skbs);
+int ieee80211_add_pending_skbs_fn(struct ieee80211_local *local,
+				  struct sk_buff_head *skbs,
+				  void (*fn)(void *data), void *data);
 
 void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata,
 			 u16 transaction, u16 auth_alg,
@@ -1287,6 +1324,10 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
 			     const u8 *ie, size_t ie_len,
 			     enum ieee80211_band band, u32 rate_mask,
 			     u8 channel);
+struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata,
+					  u8 *dst,
+					  const u8 *ssid, size_t ssid_len,
+					  const u8 *ie, size_t ie_len);
 void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
 			      const u8 *ssid, size_t ssid_len,
 			      const u8 *ie, size_t ie_len);
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index f9163b12c7f..8acba456744 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -197,11 +197,6 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 		sdata->bss = &sdata->u.ap;
 		break;
 	case NL80211_IFTYPE_MESH_POINT:
-		if (!ieee80211_vif_is_mesh(&sdata->vif))
-			break;
-		/* mesh ifaces must set allmulti to forward mcast traffic */
-		atomic_inc(&local->iff_allmultis);
-		break;
 	case NL80211_IFTYPE_STATION:
 	case NL80211_IFTYPE_MONITOR:
 	case NL80211_IFTYPE_ADHOC:
@@ -225,6 +220,8 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 		/* we're brought up, everything changes */
 		hw_reconf_flags = ~0;
 		ieee80211_led_radio(local, true);
+		ieee80211_mod_tpt_led_trig(local,
+					   IEEE80211_TPT_LEDTRIG_FL_RADIO, 0);
 	}
 
 	/*
@@ -273,12 +270,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up)
 				goto err_stop;
 		}
 
-		if (ieee80211_vif_is_mesh(&sdata->vif)) {
-			local->fif_other_bss++;
-			ieee80211_configure_filter(local);
-
-			ieee80211_start_mesh(sdata);
-		} else if (sdata->vif.type == NL80211_IFTYPE_AP) {
+		if (sdata->vif.type == NL80211_IFTYPE_AP) {
 			local->fif_pspoll++;
 			local->fif_probe_req++;
 
@@ -391,6 +383,9 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 	u32 hw_reconf_flags = 0;
 	int i;
 
+	if (local->scan_sdata == sdata)
+		ieee80211_scan_cancel(local);
+
 	clear_bit(SDATA_STATE_RUNNING, &sdata->state);
 
 	/*
@@ -500,18 +495,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		ieee80211_adjust_monitor_flags(sdata, -1);
 		ieee80211_configure_filter(local);
 		break;
-	case NL80211_IFTYPE_MESH_POINT:
-		if (ieee80211_vif_is_mesh(&sdata->vif)) {
-			/* other_bss and allmulti are always set on mesh
-			 * ifaces */
-			local->fif_other_bss--;
-			atomic_dec(&local->iff_allmultis);
-
-			ieee80211_configure_filter(local);
-
-			ieee80211_stop_mesh(sdata);
-		}
-		/* fall through */
 	default:
 		flush_work(&sdata->work);
 		/*
@@ -523,9 +506,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
 		synchronize_rcu();
 		skb_queue_purge(&sdata->skb_queue);
 
-		if (local->scan_sdata == sdata)
-			ieee80211_scan_cancel(local);
-
 		/*
 		 * Disable beaconing here for mesh only, AP and IBSS
 		 * are already taken care of.
@@ -1204,12 +1184,6 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 	if (ret)
 		goto fail;
 
-	if (ieee80211_vif_is_mesh(&sdata->vif) &&
-	    params && params->mesh_id_len)
-		ieee80211_sdata_set_mesh_id(sdata,
-					    params->mesh_id_len,
-					    params->mesh_id);
-
 	mutex_lock(&local->iflist_mtx);
 	list_add_tail_rcu(&sdata->list, &local->interfaces);
 	mutex_unlock(&local->iflist_mtx);
@@ -1290,8 +1264,9 @@ u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
 {
 	struct ieee80211_sub_if_data *sdata;
 	int count = 0;
-	bool working = false, scanning = false;
+	bool working = false, scanning = false, hw_roc = false;
 	struct ieee80211_work *wk;
+	unsigned int led_trig_start = 0, led_trig_stop = 0;
 
 #ifdef CONFIG_PROVE_LOCKING
 	WARN_ON(debug_locks && !lockdep_rtnl_is_held() &&
@@ -1333,6 +1308,9 @@ u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
 		local->scan_sdata->vif.bss_conf.idle = false;
 	}
 
+	if (local->hw_roc_channel)
+		hw_roc = true;
+
 	list_for_each_entry(sdata, &local->interfaces, list) {
 		if (sdata->old_idle == sdata->vif.bss_conf.idle)
 			continue;
@@ -1341,6 +1319,20 @@ u32 __ieee80211_recalc_idle(struct ieee80211_local *local)
 		ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE);
 	}
 
+	if (working || scanning || hw_roc)
+		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
+	else
+		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
+
+	if (count)
+		led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
+	else
+		led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
+
+	ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
+
+	if (hw_roc)
+		return ieee80211_idle_off(local, "hw remain-on-channel");
 	if (working)
 		return ieee80211_idle_off(local, "working");
 	if (scanning)
diff --git a/net/mac80211/key.c b/net/mac80211/key.c
index ccd676b2f59..8c02469b717 100644
--- a/net/mac80211/key.c
+++ b/net/mac80211/key.c
@@ -30,19 +30,20 @@
  * keys and per-station keys. Since each station belongs to an interface,
  * each station key also belongs to that interface.
  *
- * Hardware acceleration is done on a best-effort basis, for each key
- * that is eligible the hardware is asked to enable that key but if
- * it cannot do that they key is simply kept for software encryption.
- * There is currently no way of knowing this except by looking into
- * debugfs.
+ * Hardware acceleration is done on a best-effort basis for algorithms
+ * that are implemented in software,  for each key the hardware is asked
+ * to enable that key for offloading but if it cannot do that the key is
+ * simply kept for software encryption (unless it is for an algorithm
+ * that isn't implemented in software).
+ * There is currently no way of knowing whether a key is handled in SW
+ * or HW except by looking into debugfs.
  *
- * All key operations are protected internally.
- *
- * Within mac80211, key references are, just as STA structure references,
- * protected by RCU. Note, however, that some things are unprotected,
- * namely the key->sta dereferences within the hardware acceleration
- * functions. This means that sta_info_destroy() must remove the key
- * which waits for an RCU grace period.
+ * All key management is internally protected by a mutex. Within all
+ * other parts of mac80211, key references are, just as STA structure
+ * references, protected by RCU. Note, however, that some things are
+ * unprotected, namely the key->sta dereferences within the hardware
+ * acceleration functions. This means that sta_info_destroy() must
+ * remove the key which waits for an RCU grace period.
  */
 
 static const u8 bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
@@ -84,10 +85,17 @@ static int ieee80211_key_enable_hw_accel(struct ieee80211_key *key)
 		goto out_unsupported;
 
 	sdata = key->sdata;
-	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+	if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
+		/*
+		 * The driver doesn't know anything about VLAN interfaces.
+		 * Hence, don't send GTKs for VLAN interfaces to the driver.
+		 */
+		if (!(key->conf.flags & IEEE80211_KEY_FLAG_PAIRWISE))
+			goto out_unsupported;
 		sdata = container_of(sdata->bss,
 				     struct ieee80211_sub_if_data,
 				     u.ap);
+	}
 
 	ret = drv_set_key(key->local, SET_KEY, sdata, sta, &key->conf);
 
@@ -171,7 +179,7 @@ void ieee80211_key_removed(struct ieee80211_key_conf *key_conf)
 EXPORT_SYMBOL_GPL(ieee80211_key_removed);
 
 static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata,
-					int idx)
+					int idx, bool uni, bool multi)
 {
 	struct ieee80211_key *key = NULL;
 
@@ -180,18 +188,19 @@ static void __ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata,
 	if (idx >= 0 && idx < NUM_DEFAULT_KEYS)
 		key = sdata->keys[idx];
 
-	rcu_assign_pointer(sdata->default_key, key);
+	if (uni)
+		rcu_assign_pointer(sdata->default_unicast_key, key);
+	if (multi)
+		rcu_assign_pointer(sdata->default_multicast_key, key);
 
-	if (key) {
-		ieee80211_debugfs_key_remove_default(key->sdata);
-		ieee80211_debugfs_key_add_default(key->sdata);
-	}
+	ieee80211_debugfs_key_update_default(sdata);
 }
 
-void ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, int idx)
+void ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, int idx,
+			       bool uni, bool multi)
 {
 	mutex_lock(&sdata->local->key_mtx);
-	__ieee80211_set_default_key(sdata, idx);
+	__ieee80211_set_default_key(sdata, idx, uni, multi);
 	mutex_unlock(&sdata->local->key_mtx);
 }
 
@@ -208,10 +217,7 @@ __ieee80211_set_default_mgmt_key(struct ieee80211_sub_if_data *sdata, int idx)
 
 	rcu_assign_pointer(sdata->default_mgmt_key, key);
 
-	if (key) {
-		ieee80211_debugfs_key_remove_mgmt_default(key->sdata);
-		ieee80211_debugfs_key_add_mgmt_default(key->sdata);
-	}
+	ieee80211_debugfs_key_update_default(sdata);
 }
 
 void ieee80211_set_default_mgmt_key(struct ieee80211_sub_if_data *sdata,
@@ -229,7 +235,8 @@ static void __ieee80211_key_replace(struct ieee80211_sub_if_data *sdata,
 				    struct ieee80211_key *old,
 				    struct ieee80211_key *new)
 {
-	int idx, defkey, defmgmtkey;
+	int idx;
+	bool defunikey, defmultikey, defmgmtkey;
 
 	if (new)
 		list_add(&new->list, &sdata->key_list);
@@ -250,29 +257,31 @@ static void __ieee80211_key_replace(struct ieee80211_sub_if_data *sdata,
 		else
 			idx = new->conf.keyidx;
 
-		defkey = old && sdata->default_key == old;
+		defunikey = old && sdata->default_unicast_key == old;
+		defmultikey = old && sdata->default_multicast_key == old;
 		defmgmtkey = old && sdata->default_mgmt_key == old;
 
-		if (defkey && !new)
-			__ieee80211_set_default_key(sdata, -1);
+		if (defunikey && !new)
+			__ieee80211_set_default_key(sdata, -1, true, false);
+		if (defmultikey && !new)
+			__ieee80211_set_default_key(sdata, -1, false, true);
 		if (defmgmtkey && !new)
 			__ieee80211_set_default_mgmt_key(sdata, -1);
 
 		rcu_assign_pointer(sdata->keys[idx], new);
-		if (defkey && new)
-			__ieee80211_set_default_key(sdata, new->conf.keyidx);
+		if (defunikey && new)
+			__ieee80211_set_default_key(sdata, new->conf.keyidx,
+						    true, false);
+		if (defmultikey && new)
+			__ieee80211_set_default_key(sdata, new->conf.keyidx,
+						    false, true);
 		if (defmgmtkey && new)
 			__ieee80211_set_default_mgmt_key(sdata,
 							 new->conf.keyidx);
 	}
 
-	if (old) {
-		/*
-		 * We'll use an empty list to indicate that the key
-		 * has already been removed.
-		 */
-		list_del_init(&old->list);
-	}
+	if (old)
+		list_del(&old->list);
 }
 
 struct ieee80211_key *ieee80211_key_alloc(u32 cipher, int idx, size_t key_len,
@@ -366,6 +375,12 @@ static void __ieee80211_key_destroy(struct ieee80211_key *key)
 	if (!key)
 		return;
 
+	/*
+	 * Synchronize so the TX path can no longer be using
+	 * this key before we free/remove it.
+	 */
+	synchronize_rcu();
+
 	if (key->local)
 		ieee80211_key_disable_hw_accel(key);
 
@@ -407,8 +422,8 @@ int ieee80211_key_link(struct ieee80211_key *key,
 			struct sta_info *ap;
 
 			/*
-			 * We're getting a sta pointer in,
-			 * so must be under RCU read lock.
+			 * We're getting a sta pointer in, so must be under
+			 * appropriate locking for sta_info_get().
 			 */
 
 			/* same here, the AP could be using QoS */
@@ -502,11 +517,12 @@ void ieee80211_free_keys(struct ieee80211_sub_if_data *sdata)
 
 	mutex_lock(&sdata->local->key_mtx);
 
-	ieee80211_debugfs_key_remove_default(sdata);
 	ieee80211_debugfs_key_remove_mgmt_default(sdata);
 
 	list_for_each_entry_safe(key, tmp, &sdata->key_list, list)
 		__ieee80211_key_free(key);
 
+	ieee80211_debugfs_key_update_default(sdata);
+
 	mutex_unlock(&sdata->local->key_mtx);
 }
diff --git a/net/mac80211/key.h b/net/mac80211/key.h
index 0db1c0f5f69..8106aa1b746 100644
--- a/net/mac80211/key.h
+++ b/net/mac80211/key.h
@@ -138,7 +138,8 @@ int __must_check ieee80211_key_link(struct ieee80211_key *key,
 				    struct sta_info *sta);
 void ieee80211_key_free(struct ieee80211_local *local,
 			struct ieee80211_key *key);
-void ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, int idx);
+void ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, int idx,
+			       bool uni, bool multi);
 void ieee80211_set_default_mgmt_key(struct ieee80211_sub_if_data *sdata,
 				    int idx);
 void ieee80211_free_keys(struct ieee80211_sub_if_data *sdata);
diff --git a/net/mac80211/led.c b/net/mac80211/led.c
index 063aad94424..14590332c81 100644
--- a/net/mac80211/led.c
+++ b/net/mac80211/led.c
@@ -54,12 +54,22 @@ void ieee80211_led_radio(struct ieee80211_local *local, bool enabled)
 		led_trigger_event(local->radio_led, LED_OFF);
 }
 
+void ieee80211_led_names(struct ieee80211_local *local)
+{
+	snprintf(local->rx_led_name, sizeof(local->rx_led_name),
+		 "%srx", wiphy_name(local->hw.wiphy));
+	snprintf(local->tx_led_name, sizeof(local->tx_led_name),
+		 "%stx", wiphy_name(local->hw.wiphy));
+	snprintf(local->assoc_led_name, sizeof(local->assoc_led_name),
+		 "%sassoc", wiphy_name(local->hw.wiphy));
+	snprintf(local->radio_led_name, sizeof(local->radio_led_name),
+		 "%sradio", wiphy_name(local->hw.wiphy));
+}
+
 void ieee80211_led_init(struct ieee80211_local *local)
 {
 	local->rx_led = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
 	if (local->rx_led) {
-		snprintf(local->rx_led_name, sizeof(local->rx_led_name),
-			 "%srx", wiphy_name(local->hw.wiphy));
 		local->rx_led->name = local->rx_led_name;
 		if (led_trigger_register(local->rx_led)) {
 			kfree(local->rx_led);
@@ -69,8 +79,6 @@ void ieee80211_led_init(struct ieee80211_local *local)
 
 	local->tx_led = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
 	if (local->tx_led) {
-		snprintf(local->tx_led_name, sizeof(local->tx_led_name),
-			 "%stx", wiphy_name(local->hw.wiphy));
 		local->tx_led->name = local->tx_led_name;
 		if (led_trigger_register(local->tx_led)) {
 			kfree(local->tx_led);
@@ -80,8 +88,6 @@ void ieee80211_led_init(struct ieee80211_local *local)
 
 	local->assoc_led = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
 	if (local->assoc_led) {
-		snprintf(local->assoc_led_name, sizeof(local->assoc_led_name),
-			 "%sassoc", wiphy_name(local->hw.wiphy));
 		local->assoc_led->name = local->assoc_led_name;
 		if (led_trigger_register(local->assoc_led)) {
 			kfree(local->assoc_led);
@@ -91,14 +97,19 @@ void ieee80211_led_init(struct ieee80211_local *local)
 
 	local->radio_led = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
 	if (local->radio_led) {
-		snprintf(local->radio_led_name, sizeof(local->radio_led_name),
-			 "%sradio", wiphy_name(local->hw.wiphy));
 		local->radio_led->name = local->radio_led_name;
 		if (led_trigger_register(local->radio_led)) {
 			kfree(local->radio_led);
 			local->radio_led = NULL;
 		}
 	}
+
+	if (local->tpt_led_trigger) {
+		if (led_trigger_register(&local->tpt_led_trigger->trig)) {
+			kfree(local->tpt_led_trigger);
+			local->tpt_led_trigger = NULL;
+		}
+	}
 }
 
 void ieee80211_led_exit(struct ieee80211_local *local)
@@ -119,15 +130,18 @@ void ieee80211_led_exit(struct ieee80211_local *local)
 		led_trigger_unregister(local->rx_led);
 		kfree(local->rx_led);
 	}
+
+	if (local->tpt_led_trigger) {
+		led_trigger_unregister(&local->tpt_led_trigger->trig);
+		kfree(local->tpt_led_trigger);
+	}
 }
 
 char *__ieee80211_get_radio_led_name(struct ieee80211_hw *hw)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 
-	if (local->radio_led)
-		return local->radio_led_name;
-	return NULL;
+	return local->radio_led_name;
 }
 EXPORT_SYMBOL(__ieee80211_get_radio_led_name);
 
@@ -135,9 +149,7 @@ char *__ieee80211_get_assoc_led_name(struct ieee80211_hw *hw)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 
-	if (local->assoc_led)
-		return local->assoc_led_name;
-	return NULL;
+	return local->assoc_led_name;
 }
 EXPORT_SYMBOL(__ieee80211_get_assoc_led_name);
 
@@ -145,9 +157,7 @@ char *__ieee80211_get_tx_led_name(struct ieee80211_hw *hw)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 
-	if (local->tx_led)
-		return local->tx_led_name;
-	return NULL;
+	return local->tx_led_name;
 }
 EXPORT_SYMBOL(__ieee80211_get_tx_led_name);
 
@@ -155,8 +165,144 @@ char *__ieee80211_get_rx_led_name(struct ieee80211_hw *hw)
 {
 	struct ieee80211_local *local = hw_to_local(hw);
 
-	if (local->rx_led)
-		return local->rx_led_name;
-	return NULL;
+	return local->rx_led_name;
 }
 EXPORT_SYMBOL(__ieee80211_get_rx_led_name);
+
+static unsigned long tpt_trig_traffic(struct ieee80211_local *local,
+				      struct tpt_led_trigger *tpt_trig)
+{
+	unsigned long traffic, delta;
+
+	traffic = tpt_trig->tx_bytes + tpt_trig->rx_bytes;
+
+	delta = traffic - tpt_trig->prev_traffic;
+	tpt_trig->prev_traffic = traffic;
+	return DIV_ROUND_UP(delta, 1024 / 8);
+}
+
+static void tpt_trig_timer(unsigned long data)
+{
+	struct ieee80211_local *local = (void *)data;
+	struct tpt_led_trigger *tpt_trig = local->tpt_led_trigger;
+	struct led_classdev *led_cdev;
+	unsigned long on, off, tpt;
+	int i;
+
+	if (!tpt_trig->running)
+		return;
+
+	mod_timer(&tpt_trig->timer, round_jiffies(jiffies + HZ));
+
+	tpt = tpt_trig_traffic(local, tpt_trig);
+
+	/* default to just solid on */
+	on = 1;
+	off = 0;
+
+	for (i = tpt_trig->blink_table_len - 1; i >= 0; i--) {
+		if (tpt_trig->blink_table[i].throughput < 0 ||
+		    tpt > tpt_trig->blink_table[i].throughput) {
+			off = tpt_trig->blink_table[i].blink_time / 2;
+			on = tpt_trig->blink_table[i].blink_time - off;
+			break;
+		}
+	}
+
+	read_lock(&tpt_trig->trig.leddev_list_lock);
+	list_for_each_entry(led_cdev, &tpt_trig->trig.led_cdevs, trig_list)
+		led_blink_set(led_cdev, &on, &off);
+	read_unlock(&tpt_trig->trig.leddev_list_lock);
+}
+
+char *__ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw,
+				unsigned int flags,
+				const struct ieee80211_tpt_blink *blink_table,
+				unsigned int blink_table_len)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+	struct tpt_led_trigger *tpt_trig;
+
+	if (WARN_ON(local->tpt_led_trigger))
+		return NULL;
+
+	tpt_trig = kzalloc(sizeof(struct tpt_led_trigger), GFP_KERNEL);
+	if (!tpt_trig)
+		return NULL;
+
+	snprintf(tpt_trig->name, sizeof(tpt_trig->name),
+		 "%stpt", wiphy_name(local->hw.wiphy));
+
+	tpt_trig->trig.name = tpt_trig->name;
+
+	tpt_trig->blink_table = blink_table;
+	tpt_trig->blink_table_len = blink_table_len;
+	tpt_trig->want = flags;
+
+	setup_timer(&tpt_trig->timer, tpt_trig_timer, (unsigned long)local);
+
+	local->tpt_led_trigger = tpt_trig;
+
+	return tpt_trig->name;
+}
+EXPORT_SYMBOL(__ieee80211_create_tpt_led_trigger);
+
+static void ieee80211_start_tpt_led_trig(struct ieee80211_local *local)
+{
+	struct tpt_led_trigger *tpt_trig = local->tpt_led_trigger;
+
+	if (tpt_trig->running)
+		return;
+
+	/* reset traffic */
+	tpt_trig_traffic(local, tpt_trig);
+	tpt_trig->running = true;
+
+	tpt_trig_timer((unsigned long)local);
+	mod_timer(&tpt_trig->timer, round_jiffies(jiffies + HZ));
+}
+
+static void ieee80211_stop_tpt_led_trig(struct ieee80211_local *local)
+{
+	struct tpt_led_trigger *tpt_trig = local->tpt_led_trigger;
+	struct led_classdev *led_cdev;
+
+	if (!tpt_trig->running)
+		return;
+
+	tpt_trig->running = false;
+	del_timer_sync(&tpt_trig->timer);
+
+	read_lock(&tpt_trig->trig.leddev_list_lock);
+	list_for_each_entry(led_cdev, &tpt_trig->trig.led_cdevs, trig_list)
+		led_brightness_set(led_cdev, LED_OFF);
+	read_unlock(&tpt_trig->trig.leddev_list_lock);
+}
+
+void ieee80211_mod_tpt_led_trig(struct ieee80211_local *local,
+				unsigned int types_on, unsigned int types_off)
+{
+	struct tpt_led_trigger *tpt_trig = local->tpt_led_trigger;
+	bool allowed;
+
+	WARN_ON(types_on & types_off);
+
+	if (!tpt_trig)
+		return;
+
+	tpt_trig->active &= ~types_off;
+	tpt_trig->active |= types_on;
+
+	/*
+	 * Regardless of wanted state, we shouldn't blink when
+	 * the radio is disabled -- this can happen due to some
+	 * code ordering issues with __ieee80211_recalc_idle()
+	 * being called before the radio is started.
+	 */
+	allowed = tpt_trig->active & IEEE80211_TPT_LEDTRIG_FL_RADIO;
+
+	if (!allowed || !(tpt_trig->active & tpt_trig->want))
+		ieee80211_stop_tpt_led_trig(local);
+	else
+		ieee80211_start_tpt_led_trig(local);
+}
diff --git a/net/mac80211/led.h b/net/mac80211/led.h
index 77b1e1ba603..e0275d9befa 100644
--- a/net/mac80211/led.h
+++ b/net/mac80211/led.h
@@ -12,14 +12,17 @@
 #include "ieee80211_i.h"
 
 #ifdef CONFIG_MAC80211_LEDS
-extern void ieee80211_led_rx(struct ieee80211_local *local);
-extern void ieee80211_led_tx(struct ieee80211_local *local, int q);
-extern void ieee80211_led_assoc(struct ieee80211_local *local,
-				bool associated);
-extern void ieee80211_led_radio(struct ieee80211_local *local,
-				bool enabled);
-extern void ieee80211_led_init(struct ieee80211_local *local);
-extern void ieee80211_led_exit(struct ieee80211_local *local);
+void ieee80211_led_rx(struct ieee80211_local *local);
+void ieee80211_led_tx(struct ieee80211_local *local, int q);
+void ieee80211_led_assoc(struct ieee80211_local *local,
+			 bool associated);
+void ieee80211_led_radio(struct ieee80211_local *local,
+			 bool enabled);
+void ieee80211_led_names(struct ieee80211_local *local);
+void ieee80211_led_init(struct ieee80211_local *local);
+void ieee80211_led_exit(struct ieee80211_local *local);
+void ieee80211_mod_tpt_led_trig(struct ieee80211_local *local,
+				unsigned int types_on, unsigned int types_off);
 #else
 static inline void ieee80211_led_rx(struct ieee80211_local *local)
 {
@@ -35,10 +38,36 @@ static inline void ieee80211_led_radio(struct ieee80211_local *local,
 				       bool enabled)
 {
 }
+static inline void ieee80211_led_names(struct ieee80211_local *local)
+{
+}
 static inline void ieee80211_led_init(struct ieee80211_local *local)
 {
 }
 static inline void ieee80211_led_exit(struct ieee80211_local *local)
 {
 }
+static inline void ieee80211_mod_tpt_led_trig(struct ieee80211_local *local,
+					      unsigned int types_on,
+					      unsigned int types_off)
+{
+}
+#endif
+
+static inline void
+ieee80211_tpt_led_trig_tx(struct ieee80211_local *local, __le16 fc, int bytes)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	if (local->tpt_led_trigger && ieee80211_is_data(fc))
+		local->tpt_led_trigger->tx_bytes += bytes;
+#endif
+}
+
+static inline void
+ieee80211_tpt_led_trig_rx(struct ieee80211_local *local, __le16 fc, int bytes)
+{
+#ifdef CONFIG_MAC80211_LEDS
+	if (local->tpt_led_trigger && ieee80211_is_data(fc))
+		local->tpt_led_trigger->rx_bytes += bytes;
 #endif
+}
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 107a0cbe52a..485d36bc9a4 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -245,9 +245,12 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
 				sdata->vif.bss_conf.enable_beacon =
 					!!sdata->u.ibss.presp;
 				break;
+#ifdef CONFIG_MAC80211_MESH
 			case NL80211_IFTYPE_MESH_POINT:
-				sdata->vif.bss_conf.enable_beacon = true;
+				sdata->vif.bss_conf.enable_beacon =
+					!!sdata->u.mesh.mesh_id_len;
 				break;
+#endif
 			default:
 				/* not reached */
 				WARN_ON(1);
@@ -481,6 +484,10 @@ ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
 			BIT(IEEE80211_STYPE_DEAUTH >> 4) |
 			BIT(IEEE80211_STYPE_ACTION >> 4),
 	},
+	[NL80211_IFTYPE_MESH_POINT] = {
+		.tx = 0xffff,
+		.rx = BIT(IEEE80211_STYPE_ACTION >> 4),
+	},
 };
 
 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
@@ -514,10 +521,15 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 
 	wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes;
 
+	wiphy->privid = mac80211_wiphy_privid;
+
 	wiphy->flags |= WIPHY_FLAG_NETNS_OK |
 			WIPHY_FLAG_4ADDR_AP |
-			WIPHY_FLAG_4ADDR_STATION;
-	wiphy->privid = mac80211_wiphy_privid;
+			WIPHY_FLAG_4ADDR_STATION |
+			WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS;
+
+	if (!ops->set_key)
+		wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
 
 	wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
 
@@ -557,6 +569,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 	spin_lock_init(&local->filter_lock);
 	spin_lock_init(&local->queue_stop_reason_lock);
 
+	skb_queue_head_init(&local->rx_skb_queue);
+
 	INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
 
 	ieee80211_work_init(local);
@@ -593,6 +607,10 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 	/* init dummy netdev for use w/ NAPI */
 	init_dummy_netdev(&local->napi_dev);
 
+	ieee80211_led_names(local);
+
+	ieee80211_hw_roc_setup(local);
+
 	return local_to_hw(local);
 }
 EXPORT_SYMBOL(ieee80211_alloc_hw);
@@ -737,6 +755,9 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		}
 	}
 
+	if (!local->ops->remain_on_channel)
+		local->hw.wiphy->max_remain_on_channel_duration = 5000;
+
 	result = wiphy_register(local->hw.wiphy);
 	if (result < 0)
 		goto fail_wiphy_register;
@@ -898,6 +919,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
 		wiphy_warn(local->hw.wiphy, "skb_queue not empty\n");
 	skb_queue_purge(&local->skb_queue);
 	skb_queue_purge(&local->skb_queue_unreliable);
+	skb_queue_purge(&local->rx_skb_queue);
 
 	destroy_workqueue(local->workqueue);
 	wiphy_unregister(local->hw.wiphy);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index c8a4f19ed13..ca3af4685b0 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -124,15 +124,6 @@ void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
 		ieee80211_mesh_housekeeping_timer((unsigned long) sdata);
 }
 
-void mesh_ids_set_default(struct ieee80211_if_mesh *sta)
-{
-	sta->mesh_pp_id = 0;	/* HWMP */
-	sta->mesh_pm_id = 0;	/* Airtime */
-	sta->mesh_cc_id = 0;	/* Disabled */
-	sta->mesh_sp_id = 0;	/* Neighbor Offset */
-	sta->mesh_auth_id = 0;	/* Disabled */
-}
-
 int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
 {
 	int i;
@@ -287,6 +278,13 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
 	*pos++ |= sdata->u.mesh.accepting_plinks ?
 	    MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
 	*pos++ = 0x00;
+
+	if (sdata->u.mesh.vendor_ie) {
+		int len = sdata->u.mesh.vendor_ie_len;
+		const u8 *data = sdata->u.mesh.vendor_ie;
+		if (skb_tailroom(skb) > len)
+			memcpy(skb_put(skb, len), data, len);
+	}
 }
 
 u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl)
@@ -412,39 +410,33 @@ int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
  * ieee80211_new_mesh_header - create a new mesh header
  * @meshhdr:    uninitialized mesh header
  * @sdata:	mesh interface to be used
- * @addr4:	addr4 of the mesh frame (1st in ae header)
- *              may be NULL
- * @addr5:	addr5 of the mesh frame (1st or 2nd in ae header)
- *              may be NULL unless addr6 is present
- * @addr6:	addr6 of the mesh frame (2nd or 3rd in ae header)
- * 		may be NULL unless addr5 is present
+ * @addr4or5:   1st address in the ae header, which may correspond to address 4
+ *              (if addr6 is NULL) or address 5 (if addr6 is present). It may
+ *              be NULL.
+ * @addr6:	2nd address in the ae header, which corresponds to addr6 of the
+ *              mesh frame
  *
  * Return the header length.
  */
 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
-		struct ieee80211_sub_if_data *sdata, char *addr4,
-		char *addr5, char *addr6)
+		struct ieee80211_sub_if_data *sdata, char *addr4or5,
+		char *addr6)
 {
 	int aelen = 0;
+	BUG_ON(!addr4or5 && addr6);
 	memset(meshhdr, 0, sizeof(*meshhdr));
 	meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
 	put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
 	sdata->u.mesh.mesh_seqnum++;
-	if (addr4) {
+	if (addr4or5 && !addr6) {
 		meshhdr->flags |= MESH_FLAGS_AE_A4;
 		aelen += ETH_ALEN;
-		memcpy(meshhdr->eaddr1, addr4, ETH_ALEN);
-	}
-	if (addr5 && addr6) {
+		memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
+	} else if (addr4or5 && addr6) {
 		meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
 		aelen += 2 * ETH_ALEN;
-		if (!addr4) {
-			memcpy(meshhdr->eaddr1, addr5, ETH_ALEN);
-			memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
-		} else {
-			memcpy(meshhdr->eaddr2, addr5, ETH_ALEN);
-			memcpy(meshhdr->eaddr3, addr6, ETH_ALEN);
-		}
+		memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
+		memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
 	}
 	return 6 + aelen;
 }
@@ -513,6 +505,14 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct ieee80211_local *local = sdata->local;
 
+	local->fif_other_bss++;
+	/* mesh ifaces must set allmulti to forward mcast traffic */
+	atomic_inc(&local->iff_allmultis);
+	ieee80211_configure_filter(local);
+
+	ifmsh->mesh_cc_id = 0;	/* Disabled */
+	ifmsh->mesh_sp_id = 0;	/* Neighbor Offset */
+	ifmsh->mesh_auth_id = 0;	/* Disabled */
 	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
 	ieee80211_mesh_root_setup(ifmsh);
 	ieee80211_queue_work(&local->hw, &sdata->work);
@@ -524,6 +524,13 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
 
 void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 {
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+
+	ifmsh->mesh_id_len = 0;
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
+	sta_info_flush(local, NULL);
+
 	del_timer_sync(&sdata->u.mesh.housekeeping_timer);
 	del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
 	/*
@@ -534,6 +541,10 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
 	 * it no longer is.
 	 */
 	cancel_work_sync(&sdata->work);
+
+	local->fif_other_bss--;
+	atomic_dec(&local->iff_allmultis);
+	ieee80211_configure_filter(local);
 }
 
 static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
@@ -663,26 +674,6 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
 		    ieee80211_mesh_housekeeping_timer,
 		    (unsigned long) sdata);
 
-	ifmsh->mshcfg.dot11MeshRetryTimeout = MESH_RET_T;
-	ifmsh->mshcfg.dot11MeshConfirmTimeout = MESH_CONF_T;
-	ifmsh->mshcfg.dot11MeshHoldingTimeout = MESH_HOLD_T;
-	ifmsh->mshcfg.dot11MeshMaxRetries = MESH_MAX_RETR;
-	ifmsh->mshcfg.dot11MeshTTL = MESH_TTL;
-	ifmsh->mshcfg.auto_open_plinks = true;
-	ifmsh->mshcfg.dot11MeshMaxPeerLinks =
-		MESH_MAX_ESTAB_PLINKS;
-	ifmsh->mshcfg.dot11MeshHWMPactivePathTimeout =
-		MESH_PATH_TIMEOUT;
-	ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval =
-		MESH_PREQ_MIN_INT;
-	ifmsh->mshcfg.dot11MeshHWMPnetDiameterTraversalTime =
-		MESH_DIAM_TRAVERSAL_TIME;
-	ifmsh->mshcfg.dot11MeshHWMPmaxPREQretries =
-		MESH_MAX_PREQ_RETRIES;
-	ifmsh->mshcfg.path_refresh_time =
-		MESH_PATH_REFRESH_TIME;
-	ifmsh->mshcfg.min_discovery_timeout =
-		MESH_MIN_DISCOVERY_TIMEOUT;
 	ifmsh->accepting_plinks = true;
 	ifmsh->preq_id = 0;
 	ifmsh->sn = 0;
@@ -692,7 +683,6 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
 	/* Allocate all mesh structures when creating the first mesh interface. */
 	if (!mesh_allocated)
 		ieee80211s_init();
-	mesh_ids_set_default(ifmsh);
 	setup_timer(&ifmsh->mesh_path_timer,
 		    ieee80211_mesh_path_timer,
 		    (unsigned long) sdata);
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 58e74112896..b99e230fe31 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -164,44 +164,10 @@ struct mesh_rmc {
 };
 
 
-/*
- * MESH_CFG_COMP_LEN Includes:
- * 	- Active path selection protocol ID.
- * 	- Active path selection metric ID.
- * 	- Congestion control mode identifier.
- * 	- Channel precedence.
- * Does not include mesh capabilities, which may vary across nodes in the same
- * mesh
- */
-#define MESH_CFG_CMP_LEN 	(IEEE80211_MESH_CONFIG_LEN - 2)
-
-/* Default values, timeouts in ms */
-#define MESH_TTL 		31
-#define MESH_MAX_RETR	 	3
-#define MESH_RET_T 		100
-#define MESH_CONF_T 		100
-#define MESH_HOLD_T 		100
-
-#define MESH_PATH_TIMEOUT	5000
-/* Minimum interval between two consecutive PREQs originated by the same
- * interface
- */
-#define MESH_PREQ_MIN_INT	10
-#define MESH_DIAM_TRAVERSAL_TIME 50
-/* A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds before
- * timing out.  This way it will remain ACTIVE and no data frames will be
- * unnecesarily held in the pending queue.
- */
-#define MESH_PATH_REFRESH_TIME			1000
-#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
 #define MESH_DEFAULT_BEACON_INTERVAL		1000 	/* in 1024 us units */
 
-#define MESH_MAX_PREQ_RETRIES 4
 #define MESH_PATH_EXPIRE (600 * HZ)
 
-/* Default maximum number of established plinks per interface */
-#define MESH_MAX_ESTAB_PLINKS	32
-
 /* Default maximum number of plinks per interface */
 #define MESH_MAX_PLINKS		256
 
@@ -221,8 +187,8 @@ struct mesh_rmc {
 int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
 				  const u8 *da, const u8 *sa);
 int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
-		struct ieee80211_sub_if_data *sdata, char *addr4,
-		char *addr5, char *addr6);
+		struct ieee80211_sub_if_data *sdata, char *addr4or5,
+		char *addr6);
 int mesh_rmc_check(u8 *addr, struct ieee80211s_hdr *mesh_hdr,
 		struct ieee80211_sub_if_data *sdata);
 bool mesh_matches_local(struct ieee802_11_elems *ie,
@@ -318,6 +284,11 @@ static inline void mesh_path_activate(struct mesh_path *mpath)
 	mpath->flags |= MESH_PATH_ACTIVE | MESH_PATH_RESOLVED;
 }
 
+static inline bool mesh_path_sel_is_hwmp(struct ieee80211_sub_if_data *sdata)
+{
+	return sdata->u.mesh.mesh_pp_id == IEEE80211_PATH_PROTOCOL_HWMP;
+}
+
 #define for_each_mesh_entry(x, p, node, i) \
 	for (i = 0; i <= x->hash_mask; i++) \
 		hlist_for_each_entry_rcu(node, p, &x->hash_buckets[i], list)
@@ -338,6 +309,8 @@ static inline void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata)
 {}
 static inline void mesh_plink_quiesce(struct sta_info *sta) {}
 static inline void mesh_plink_restart(struct sta_info *sta) {}
+static inline bool mesh_path_sel_is_hwmp(struct ieee80211_sub_if_data *sdata)
+{ return false; }
 #endif
 
 #endif /* IEEE80211S_H */
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 829e08a657d..5bf64d7112b 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -232,7 +232,7 @@ int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn,
 	*pos++ = WLAN_EID_PERR;
 	*pos++ = ie_len;
 	/* ttl */
-	*pos++ = MESH_TTL;
+	*pos++ = ttl;
 	/* number of destinations */
 	*pos++ = 1;
 	/*
@@ -522,7 +522,7 @@ static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata,
 
 	if (reply) {
 		lifetime = PREQ_IE_LIFETIME(preq_elem);
-		ttl = ifmsh->mshcfg.dot11MeshTTL;
+		ttl = ifmsh->mshcfg.element_ttl;
 		if (ttl != 0) {
 			mhwmp_dbg("replying to the PREQ\n");
 			mesh_path_sel_frame_tx(MPATH_PREP, 0, target_addr,
@@ -877,7 +877,7 @@ void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata)
 		sdata->u.mesh.last_sn_update = jiffies;
 	}
 	lifetime = default_lifetime(sdata);
-	ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
+	ttl = sdata->u.mesh.mshcfg.element_ttl;
 	if (ttl == 0) {
 		sdata->u.mesh.mshstats.dropped_frames_ttl++;
 		spin_unlock_bh(&mpath->state_lock);
@@ -1013,5 +1013,6 @@ mesh_path_tx_root_frame(struct ieee80211_sub_if_data *sdata)
 	mesh_path_sel_frame_tx(MPATH_RANN, 0, sdata->vif.addr,
 			       cpu_to_le32(++ifmsh->sn),
 			       0, NULL, 0, broadcast_addr,
-			       0, MESH_TTL, 0, 0, 0, sdata);
+			       0, sdata->u.mesh.mshcfg.element_ttl,
+			       0, 0, 0, sdata);
 }
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 349e466cf08..8d65b47d983 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -467,8 +467,8 @@ void mesh_plink_broken(struct sta_info *sta)
 			mpath->flags &= ~MESH_PATH_ACTIVE;
 			++mpath->sn;
 			spin_unlock_bh(&mpath->state_lock);
-			mesh_path_error_tx(MESH_TTL, mpath->dst,
-					cpu_to_le32(mpath->sn),
+			mesh_path_error_tx(sdata->u.mesh.mshcfg.element_ttl,
+					mpath->dst, cpu_to_le32(mpath->sn),
 					cpu_to_le16(PERR_RCODE_DEST_UNREACH),
 					bcast, sdata);
 		} else
@@ -614,7 +614,8 @@ void mesh_path_discard_frame(struct sk_buff *skb,
 		mpath = mesh_path_lookup(da, sdata);
 		if (mpath)
 			sn = ++mpath->sn;
-		mesh_path_error_tx(MESH_TTL, skb->data, cpu_to_le32(sn),
+		mesh_path_error_tx(sdata->u.mesh.mshcfg.element_ttl, skb->data,
+				   cpu_to_le32(sn),
 				   cpu_to_le16(PERR_RCODE_NO_ROUTE), ra, sdata);
 	}
 
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 1c91f0f3c30..44b53931ba5 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -160,7 +160,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 		enum plink_frame_type action, u8 *da, __le16 llid, __le16 plid,
 		__le16 reason) {
 	struct ieee80211_local *local = sdata->local;
-	struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
+	struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400 +
+			sdata->u.mesh.vendor_ie_len);
 	struct ieee80211_mgmt *mgmt;
 	bool include_plid = false;
 	static const u8 meshpeeringproto[] = { 0x00, 0x0F, 0xAC, 0x2A };
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index a3a9421555a..45fbb9e3374 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -28,13 +28,19 @@
 #include "rate.h"
 #include "led.h"
 
+#define IEEE80211_MAX_NULLFUNC_TRIES 2
 #define IEEE80211_MAX_PROBE_TRIES 5
 
 /*
- * beacon loss detection timeout
- * XXX: should depend on beacon interval
+ * Beacon loss timeout is calculated as N frames times the
+ * advertised beacon interval.  This may need to be somewhat
+ * higher than what hardware might detect to account for
+ * delays in the host processing frames. But since we also
+ * probe on beacon miss before declaring the connection lost
+ * default to what we want.
  */
-#define IEEE80211_BEACON_LOSS_TIME	(2 * HZ)
+#define IEEE80211_BEACON_LOSS_COUNT	7
+
 /*
  * Time the connection can be idle before we probe
  * it to see if we can still talk to the AP.
@@ -121,7 +127,7 @@ void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
 		return;
 
 	mod_timer(&sdata->u.mgd.bcn_mon_timer,
-		  round_jiffies_up(jiffies + IEEE80211_BEACON_LOSS_TIME));
+		  round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
 }
 
 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
@@ -619,11 +625,12 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
 			/*
 			 * Go to full PSM if the user configures a very low
 			 * latency requirement.
-			 * The 2 second value is there for compatibility until
-			 * the PM_QOS_NETWORK_LATENCY is configured with real
-			 * values.
+			 * The 2000 second value is there for compatibility
+			 * until the PM_QOS_NETWORK_LATENCY is configured
+			 * with real values.
 			 */
-			if (latency > 1900000000 && latency != 2000000000)
+			if (latency > (1900 * USEC_PER_MSEC) &&
+			    latency != (2000 * USEC_PER_SEC))
 				timeout = 0;
 			else
 				timeout = 100;
@@ -871,6 +878,9 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 	bss_info_changed |= ieee80211_handle_bss_capability(sdata,
 		cbss->capability, bss->has_erp_value, bss->erp_value);
 
+	sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
+		IEEE80211_BEACON_LOSS_COUNT * bss_conf->beacon_int));
+
 	sdata->u.mgd.associated = cbss;
 	memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
 
@@ -1026,6 +1036,54 @@ void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
 	ieee80211_sta_reset_conn_monitor(sdata);
 }
 
+static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	if (!(ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
+			      IEEE80211_STA_CONNECTION_POLL)))
+	    return;
+
+	ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+			  IEEE80211_STA_BEACON_POLL);
+	mutex_lock(&sdata->local->iflist_mtx);
+	ieee80211_recalc_ps(sdata->local, -1);
+	mutex_unlock(&sdata->local->iflist_mtx);
+
+	if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
+		return;
+
+	/*
+	 * We've received a probe response, but are not sure whether
+	 * we have or will be receiving any beacons or data, so let's
+	 * schedule the timers again, just in case.
+	 */
+	ieee80211_sta_reset_beacon_monitor(sdata);
+
+	mod_timer(&ifmgd->conn_mon_timer,
+		  round_jiffies_up(jiffies +
+				   IEEE80211_CONNECTION_IDLE_TIME));
+}
+
+void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
+			     struct ieee80211_hdr *hdr, bool ack)
+{
+	if (!ieee80211_is_data(hdr->frame_control))
+	    return;
+
+	if (ack)
+		ieee80211_sta_reset_conn_monitor(sdata);
+
+	if (ieee80211_is_nullfunc(hdr->frame_control) &&
+	    sdata->u.mgd.probe_send_count > 0) {
+		if (ack)
+			sdata->u.mgd.probe_send_count = 0;
+		else
+			sdata->u.mgd.nullfunc_failed = true;
+		ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+	}
+}
+
 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -1041,8 +1099,20 @@ static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
 	if (ifmgd->probe_send_count >= unicast_limit)
 		dst = NULL;
 
-	ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
-	ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid[1], NULL, 0);
+	/*
+	 * When the hardware reports an accurate Tx ACK status, it's
+	 * better to send a nullfunc frame instead of a probe request,
+	 * as it will kick us off the AP quickly if we aren't associated
+	 * anymore. The timeout will be reset if the frame is ACKed by
+	 * the AP.
+	 */
+	if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
+		ifmgd->nullfunc_failed = false;
+		ieee80211_send_nullfunc(sdata->local, sdata, 0);
+	} else {
+		ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
+		ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid[1], NULL, 0);
+	}
 
 	ifmgd->probe_send_count++;
 	ifmgd->probe_timeout = jiffies + IEEE80211_PROBE_WAIT;
@@ -1108,6 +1178,30 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
 	mutex_unlock(&ifmgd->mtx);
 }
 
+struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
+					  struct ieee80211_vif *vif)
+{
+	struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	struct sk_buff *skb;
+	const u8 *ssid;
+
+	if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+		return NULL;
+
+	ASSERT_MGD_MTX(ifmgd);
+
+	if (!ifmgd->associated)
+		return NULL;
+
+	ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
+	skb = ieee80211_build_probe_req(sdata, ifmgd->associated->bssid,
+					ssid + 2, ssid[1], NULL, 0);
+
+	return skb;
+}
+EXPORT_SYMBOL(ieee80211_ap_probereq_get);
+
 static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -1485,29 +1579,8 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
 	ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
 
 	if (ifmgd->associated &&
-	    memcmp(mgmt->bssid, ifmgd->associated->bssid, ETH_ALEN) == 0 &&
-	    ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
-			    IEEE80211_STA_CONNECTION_POLL)) {
-		ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
-				  IEEE80211_STA_BEACON_POLL);
-		mutex_lock(&sdata->local->iflist_mtx);
-		ieee80211_recalc_ps(sdata->local, -1);
-		mutex_unlock(&sdata->local->iflist_mtx);
-
-		if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
-			return;
-
-		/*
-		 * We've received a probe response, but are not sure whether
-		 * we have or will be receiving any beacons or data, so let's
-		 * schedule the timers again, just in case.
-		 */
-		ieee80211_sta_reset_beacon_monitor(sdata);
-
-		mod_timer(&ifmgd->conn_mon_timer,
-			  round_jiffies_up(jiffies +
-					   IEEE80211_CONNECTION_IDLE_TIME));
-	}
+	    memcmp(mgmt->bssid, ifmgd->associated->bssid, ETH_ALEN) == 0)
+		ieee80211_reset_ap_probe(sdata);
 }
 
 /*
@@ -1845,6 +1918,31 @@ static void ieee80211_sta_timer(unsigned long data)
 	ieee80211_queue_work(&local->hw, &sdata->work);
 }
 
+static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
+					  u8 *bssid)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+	ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+			  IEEE80211_STA_BEACON_POLL);
+
+	ieee80211_set_disassoc(sdata, true, true);
+	mutex_unlock(&ifmgd->mtx);
+	mutex_lock(&local->mtx);
+	ieee80211_recalc_idle(local);
+	mutex_unlock(&local->mtx);
+	/*
+	 * must be outside lock due to cfg80211,
+	 * but that's not a problem.
+	 */
+	ieee80211_send_deauth_disassoc(sdata, bssid,
+			IEEE80211_STYPE_DEAUTH,
+			WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
+			NULL, true);
+	mutex_lock(&ifmgd->mtx);
+}
+
 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
@@ -1857,12 +1955,49 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
 			    IEEE80211_STA_CONNECTION_POLL) &&
 	    ifmgd->associated) {
 		u8 bssid[ETH_ALEN];
+		int max_tries;
 
 		memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
-		if (time_is_after_jiffies(ifmgd->probe_timeout))
-			run_again(ifmgd, ifmgd->probe_timeout);
 
-		else if (ifmgd->probe_send_count < IEEE80211_MAX_PROBE_TRIES) {
+		if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
+			max_tries = IEEE80211_MAX_NULLFUNC_TRIES;
+		else
+			max_tries = IEEE80211_MAX_PROBE_TRIES;
+
+		/* ACK received for nullfunc probing frame */
+		if (!ifmgd->probe_send_count)
+			ieee80211_reset_ap_probe(sdata);
+		else if (ifmgd->nullfunc_failed) {
+			if (ifmgd->probe_send_count < max_tries) {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+				wiphy_debug(local->hw.wiphy,
+					    "%s: No ack for nullfunc frame to"
+					    " AP %pM, try %d\n",
+					    sdata->name, bssid,
+					    ifmgd->probe_send_count);
+#endif
+				ieee80211_mgd_probe_ap_send(sdata);
+			} else {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+				wiphy_debug(local->hw.wiphy,
+					    "%s: No ack for nullfunc frame to"
+					    " AP %pM, disconnecting.\n",
+					    sdata->name, bssid);
+#endif
+				ieee80211_sta_connection_lost(sdata, bssid);
+			}
+		} else if (time_is_after_jiffies(ifmgd->probe_timeout))
+			run_again(ifmgd, ifmgd->probe_timeout);
+		else if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+			wiphy_debug(local->hw.wiphy,
+				    "%s: Failed to send nullfunc to AP %pM"
+				    " after %dms, disconnecting.\n",
+				    sdata->name,
+				    bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
+#endif
+			ieee80211_sta_connection_lost(sdata, bssid);
+		} else if (ifmgd->probe_send_count < max_tries) {
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
 			wiphy_debug(local->hw.wiphy,
 				    "%s: No probe response from AP %pM"
@@ -1877,27 +2012,13 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
 			 * We actually lost the connection ... or did we?
 			 * Let's make sure!
 			 */
-			ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
-					  IEEE80211_STA_BEACON_POLL);
 			wiphy_debug(local->hw.wiphy,
 				    "%s: No probe response from AP %pM"
 				    " after %dms, disconnecting.\n",
 				    sdata->name,
 				    bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
-			ieee80211_set_disassoc(sdata, true, true);
-			mutex_unlock(&ifmgd->mtx);
-			mutex_lock(&local->mtx);
-			ieee80211_recalc_idle(local);
-			mutex_unlock(&local->mtx);
-			/*
-			 * must be outside lock due to cfg80211,
-			 * but that's not a problem.
-			 */
-			ieee80211_send_deauth_disassoc(sdata, bssid,
-					IEEE80211_STYPE_DEAUTH,
-					WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
-					NULL, true);
-			mutex_lock(&ifmgd->mtx);
+
+			ieee80211_sta_connection_lost(sdata, bssid);
 		}
 	}
 
@@ -1988,6 +2109,8 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
 		add_timer(&ifmgd->timer);
 	if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
 		add_timer(&ifmgd->chswitch_timer);
+	ieee80211_sta_reset_beacon_monitor(sdata);
+	ieee80211_restart_sta_timer(sdata);
 }
 #endif
 
diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c
index 4b564091e51..b4e52676f3f 100644
--- a/net/mac80211/offchannel.c
+++ b/net/mac80211/offchannel.c
@@ -14,6 +14,7 @@
  */
 #include <net/mac80211.h>
 #include "ieee80211_i.h"
+#include "driver-trace.h"
 
 /*
  * inform AP that we will go to sleep so that it will buffer the frames
@@ -190,3 +191,87 @@ void ieee80211_offchannel_return(struct ieee80211_local *local,
 	}
 	mutex_unlock(&local->iflist_mtx);
 }
+
+static void ieee80211_hw_roc_start(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local, hw_roc_start);
+	struct ieee80211_sub_if_data *sdata;
+
+	mutex_lock(&local->mtx);
+
+	if (!local->hw_roc_channel) {
+		mutex_unlock(&local->mtx);
+		return;
+	}
+
+	ieee80211_recalc_idle(local);
+
+	if (local->hw_roc_skb) {
+		sdata = IEEE80211_DEV_TO_SUB_IF(local->hw_roc_dev);
+		ieee80211_tx_skb(sdata, local->hw_roc_skb);
+		local->hw_roc_skb = NULL;
+	} else {
+		cfg80211_ready_on_channel(local->hw_roc_dev,
+					  local->hw_roc_cookie,
+					  local->hw_roc_channel,
+					  local->hw_roc_channel_type,
+					  local->hw_roc_duration,
+					  GFP_KERNEL);
+	}
+
+	mutex_unlock(&local->mtx);
+}
+
+void ieee80211_ready_on_channel(struct ieee80211_hw *hw)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+
+	trace_api_ready_on_channel(local);
+
+	ieee80211_queue_work(hw, &local->hw_roc_start);
+}
+EXPORT_SYMBOL_GPL(ieee80211_ready_on_channel);
+
+static void ieee80211_hw_roc_done(struct work_struct *work)
+{
+	struct ieee80211_local *local =
+		container_of(work, struct ieee80211_local, hw_roc_done);
+
+	mutex_lock(&local->mtx);
+
+	if (!local->hw_roc_channel) {
+		mutex_unlock(&local->mtx);
+		return;
+	}
+
+	if (!local->hw_roc_for_tx)
+		cfg80211_remain_on_channel_expired(local->hw_roc_dev,
+						   local->hw_roc_cookie,
+						   local->hw_roc_channel,
+						   local->hw_roc_channel_type,
+						   GFP_KERNEL);
+
+	local->hw_roc_channel = NULL;
+	local->hw_roc_cookie = 0;
+
+	ieee80211_recalc_idle(local);
+
+	mutex_unlock(&local->mtx);
+}
+
+void ieee80211_remain_on_channel_expired(struct ieee80211_hw *hw)
+{
+	struct ieee80211_local *local = hw_to_local(hw);
+
+	trace_api_remain_on_channel_expired(local);
+
+	ieee80211_queue_work(hw, &local->hw_roc_done);
+}
+EXPORT_SYMBOL_GPL(ieee80211_remain_on_channel_expired);
+
+void ieee80211_hw_roc_setup(struct ieee80211_local *local)
+{
+	INIT_WORK(&local->hw_roc_start, ieee80211_hw_roc_start);
+	INIT_WORK(&local->hw_roc_done, ieee80211_hw_roc_done);
+}
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 33f76993da0..3d5a2cb835c 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -211,7 +211,8 @@ static bool rc_no_data_or_no_ack(struct ieee80211_tx_rate_control *txrc)
 	return (info->flags & IEEE80211_TX_CTL_NO_ACK) || !ieee80211_is_data(fc);
 }
 
-static void rc_send_low_broadcast(s8 *idx, u32 basic_rates, u8 max_rate_idx)
+static void rc_send_low_broadcast(s8 *idx, u32 basic_rates,
+				  struct ieee80211_supported_band *sband)
 {
 	u8 i;
 
@@ -222,7 +223,7 @@ static void rc_send_low_broadcast(s8 *idx, u32 basic_rates, u8 max_rate_idx)
 	if (basic_rates & (1 << *idx))
 		return; /* selected rate is a basic rate */
 
-	for (i = *idx + 1; i <= max_rate_idx; i++) {
+	for (i = *idx + 1; i <= sband->n_bitrates; i++) {
 		if (basic_rates & (1 << i)) {
 			*idx = i;
 			return;
@@ -237,16 +238,25 @@ bool rate_control_send_low(struct ieee80211_sta *sta,
 			   struct ieee80211_tx_rate_control *txrc)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(txrc->skb);
+	struct ieee80211_supported_band *sband = txrc->sband;
+	int mcast_rate;
 
 	if (!sta || !priv_sta || rc_no_data_or_no_ack(txrc)) {
 		info->control.rates[0].idx = rate_lowest_index(txrc->sband, sta);
 		info->control.rates[0].count =
 			(info->flags & IEEE80211_TX_CTL_NO_ACK) ?
 			1 : txrc->hw->max_rate_tries;
-		if (!sta && txrc->ap)
+		if (!sta && txrc->bss) {
+			mcast_rate = txrc->bss_conf->mcast_rate[sband->band];
+			if (mcast_rate > 0) {
+				info->control.rates[0].idx = mcast_rate - 1;
+				return true;
+			}
+
 			rc_send_low_broadcast(&info->control.rates[0].idx,
 					      txrc->bss_conf->basic_rates,
-					      txrc->sband->n_bitrates);
+					      sband);
+		}
 		return true;
 	}
 	return false;
diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c
index 2a18d6602d4..165a4518bb4 100644
--- a/net/mac80211/rc80211_minstrel_ht.c
+++ b/net/mac80211/rc80211_minstrel_ht.c
@@ -371,7 +371,10 @@ minstrel_aggr_check(struct minstrel_priv *mp, struct ieee80211_sta *pubsta, stru
 	if (likely(sta->ampdu_mlme.tid_tx[tid]))
 		return;
 
-	ieee80211_start_tx_ba_session(pubsta, tid);
+	if (skb_get_queue_mapping(skb) == IEEE80211_AC_VO)
+		return;
+
+	ieee80211_start_tx_ba_session(pubsta, tid, 5000);
 }
 
 static void
@@ -407,8 +410,8 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband,
 	mi->ampdu_len += info->status.ampdu_len;
 
 	if (!mi->sample_wait && !mi->sample_tries && mi->sample_count > 0) {
-		mi->sample_wait = 4 + 2 * MINSTREL_TRUNC(mi->avg_ampdu_len);
-		mi->sample_tries = 3;
+		mi->sample_wait = 16 + 2 * MINSTREL_TRUNC(mi->avg_ampdu_len);
+		mi->sample_tries = 2;
 		mi->sample_count--;
 	}
 
@@ -506,7 +509,9 @@ minstrel_ht_set_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi,
 	if (!mr->retry_updated)
 		minstrel_calc_retransmit(mp, mi, index);
 
-	if (mr->probability < MINSTREL_FRAC(20, 100))
+	if (sample)
+		rate->count = 1;
+	else if (mr->probability < MINSTREL_FRAC(20, 100))
 		rate->count = 2;
 	else if (rtscts)
 		rate->count = mr->retry_count_rtscts;
@@ -562,7 +567,7 @@ minstrel_get_sample_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi)
 	 */
 	if (minstrel_get_duration(sample_idx) >
 	    minstrel_get_duration(mi->max_tp_rate)) {
-		if (mr->sample_skipped < 10)
+		if (mr->sample_skipped < 20)
 			goto next;
 
 		if (mi->sample_slow++ > 2)
@@ -586,6 +591,7 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 	struct minstrel_ht_sta *mi = &msp->ht;
 	struct minstrel_priv *mp = priv;
 	int sample_idx;
+	bool sample = false;
 
 	if (rate_control_send_low(sta, priv_sta, txrc))
 		return;
@@ -596,10 +602,11 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 	info->flags |= mi->tx_flags;
 	sample_idx = minstrel_get_sample_rate(mp, mi);
 	if (sample_idx >= 0) {
+		sample = true;
 		minstrel_ht_set_rate(mp, mi, &ar[0], sample_idx,
 			txrc, true, false);
 		minstrel_ht_set_rate(mp, mi, &ar[1], mi->max_tp_rate,
-			txrc, false, true);
+			txrc, false, false);
 		info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
 	} else {
 		minstrel_ht_set_rate(mp, mi, &ar[0], mi->max_tp_rate,
@@ -607,7 +614,7 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 		minstrel_ht_set_rate(mp, mi, &ar[1], mi->max_tp_rate2,
 			txrc, false, true);
 	}
-	minstrel_ht_set_rate(mp, mi, &ar[2], mi->max_prob_rate, txrc, false, true);
+	minstrel_ht_set_rate(mp, mi, &ar[2], mi->max_prob_rate, txrc, false, !sample);
 
 	ar[3].count = 0;
 	ar[3].idx = -1;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 902b03ee8f6..a6701ed87f0 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -533,10 +533,13 @@ static inline u16 seq_sub(u16 sq1, u16 sq2)
 
 static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
 					    struct tid_ampdu_rx *tid_agg_rx,
-					    int index,
-					    struct sk_buff_head *frames)
+					    int index)
 {
+	struct ieee80211_local *local = hw_to_local(hw);
 	struct sk_buff *skb = tid_agg_rx->reorder_buf[index];
+	struct ieee80211_rx_status *status;
+
+	lockdep_assert_held(&tid_agg_rx->reorder_lock);
 
 	if (!skb)
 		goto no_frame;
@@ -544,7 +547,9 @@ static void ieee80211_release_reorder_frame(struct ieee80211_hw *hw,
 	/* release the frame from the reorder ring buffer */
 	tid_agg_rx->stored_mpdu_num--;
 	tid_agg_rx->reorder_buf[index] = NULL;
-	__skb_queue_tail(frames, skb);
+	status = IEEE80211_SKB_RXCB(skb);
+	status->rx_flags |= IEEE80211_RX_DEFERRED_RELEASE;
+	skb_queue_tail(&local->rx_skb_queue, skb);
 
 no_frame:
 	tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num);
@@ -552,15 +557,16 @@ no_frame:
 
 static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
 					     struct tid_ampdu_rx *tid_agg_rx,
-					     u16 head_seq_num,
-					     struct sk_buff_head *frames)
+					     u16 head_seq_num)
 {
 	int index;
 
+	lockdep_assert_held(&tid_agg_rx->reorder_lock);
+
 	while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) {
 		index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
 							tid_agg_rx->buf_size;
-		ieee80211_release_reorder_frame(hw, tid_agg_rx, index, frames);
+		ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
 	}
 }
 
@@ -576,11 +582,12 @@ static void ieee80211_release_reorder_frames(struct ieee80211_hw *hw,
 #define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10)
 
 static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
-					  struct tid_ampdu_rx *tid_agg_rx,
-					  struct sk_buff_head *frames)
+					  struct tid_ampdu_rx *tid_agg_rx)
 {
 	int index, j;
 
+	lockdep_assert_held(&tid_agg_rx->reorder_lock);
+
 	/* release the buffer until next missing frame */
 	index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
 						tid_agg_rx->buf_size;
@@ -606,8 +613,7 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
 				wiphy_debug(hw->wiphy,
 					    "release an RX reorder frame due to timeout on earlier frames\n");
 #endif
-			ieee80211_release_reorder_frame(hw, tid_agg_rx,
-							j, frames);
+			ieee80211_release_reorder_frame(hw, tid_agg_rx, j);
 
 			/*
 			 * Increment the head seq# also for the skipped slots.
@@ -617,31 +623,11 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
 			skipped = 0;
 		}
 	} else while (tid_agg_rx->reorder_buf[index]) {
-		ieee80211_release_reorder_frame(hw, tid_agg_rx, index, frames);
+		ieee80211_release_reorder_frame(hw, tid_agg_rx, index);
 		index =	seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) %
 							tid_agg_rx->buf_size;
 	}
 
-	/*
-	 * Disable the reorder release timer for now.
-	 *
-	 * The current implementation lacks a proper locking scheme
-	 * which would protect vital statistic and debug counters
-	 * from being updated by two different but concurrent BHs.
-	 *
-	 * More information about the topic is available from:
-	 * - thread: http://marc.info/?t=128635927000001
-	 *
-	 * What was wrong:
-	 * =>  http://marc.info/?l=linux-wireless&m=128636170811964
-	 * "Basically the thing is that until your patch, the data
-	 *  in the struct didn't actually need locking because it
-	 *  was accessed by the RX path only which is not concurrent."
-	 *
-	 * List of what needs to be fixed:
-	 * => http://marc.info/?l=linux-wireless&m=128656352920957
-	 *
-
 	if (tid_agg_rx->stored_mpdu_num) {
 		j = index = seq_sub(tid_agg_rx->head_seq_num,
 				    tid_agg_rx->ssn) % tid_agg_rx->buf_size;
@@ -660,10 +646,6 @@ static void ieee80211_sta_reorder_release(struct ieee80211_hw *hw,
 	} else {
 		del_timer(&tid_agg_rx->reorder_timer);
 	}
-	*/
-
-set_release_timer:
-	return;
 }
 
 /*
@@ -673,8 +655,7 @@ set_release_timer:
  */
 static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 					     struct tid_ampdu_rx *tid_agg_rx,
-					     struct sk_buff *skb,
-					     struct sk_buff_head *frames)
+					     struct sk_buff *skb)
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
 	u16 sc = le16_to_cpu(hdr->seq_ctrl);
@@ -683,10 +664,11 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 	int index;
 	bool ret = true;
 
+	spin_lock(&tid_agg_rx->reorder_lock);
+
 	buf_size = tid_agg_rx->buf_size;
 	head_seq_num = tid_agg_rx->head_seq_num;
 
-	spin_lock(&tid_agg_rx->reorder_lock);
 	/* frame with out of date sequence number */
 	if (seq_less(mpdu_seq_num, head_seq_num)) {
 		dev_kfree_skb(skb);
@@ -700,8 +682,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 	if (!seq_less(mpdu_seq_num, head_seq_num + buf_size)) {
 		head_seq_num = seq_inc(seq_sub(mpdu_seq_num, buf_size));
 		/* release stored frames up to new head to stack */
-		ieee80211_release_reorder_frames(hw, tid_agg_rx, head_seq_num,
-						 frames);
+		ieee80211_release_reorder_frames(hw, tid_agg_rx, head_seq_num);
 	}
 
 	/* Now the new frame is always in the range of the reordering buffer */
@@ -729,7 +710,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
 	tid_agg_rx->reorder_buf[index] = skb;
 	tid_agg_rx->reorder_time[index] = jiffies;
 	tid_agg_rx->stored_mpdu_num++;
-	ieee80211_sta_reorder_release(hw, tid_agg_rx, frames);
+	ieee80211_sta_reorder_release(hw, tid_agg_rx);
 
  out:
 	spin_unlock(&tid_agg_rx->reorder_lock);
@@ -740,8 +721,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw,
  * Reorder MPDUs from A-MPDUs, keeping them on a buffer. Returns
  * true if the MPDU was buffered, false if it should be processed.
  */
-static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx,
-				       struct sk_buff_head *frames)
+static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx)
 {
 	struct sk_buff *skb = rx->skb;
 	struct ieee80211_local *local = rx->local;
@@ -796,11 +776,11 @@ static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx,
 	 * sure that we cannot get to it any more before doing
 	 * anything with it.
 	 */
-	if (ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb, frames))
+	if (ieee80211_sta_manage_reorder_buf(hw, tid_agg_rx, skb))
 		return;
 
  dont_reorder:
-	__skb_queue_tail(frames, skb);
+	skb_queue_tail(&local->rx_skb_queue, skb);
 }
 
 static ieee80211_rx_result debug_noinline
@@ -948,12 +928,31 @@ ieee80211_rx_h_decrypt(struct ieee80211_rx_data *rx)
 		 * have been expected.
 		 */
 		struct ieee80211_key *key = NULL;
+		struct ieee80211_sub_if_data *sdata = rx->sdata;
+		int i;
+
 		if (ieee80211_is_mgmt(fc) &&
 		    is_multicast_ether_addr(hdr->addr1) &&
 		    (key = rcu_dereference(rx->sdata->default_mgmt_key)))
 			rx->key = key;
-		else if ((key = rcu_dereference(rx->sdata->default_key)))
-			rx->key = key;
+		else {
+			if (rx->sta) {
+				for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
+					key = rcu_dereference(rx->sta->gtk[i]);
+					if (key)
+						break;
+				}
+			}
+			if (!key) {
+				for (i = 0; i < NUM_DEFAULT_KEYS; i++) {
+					key = rcu_dereference(sdata->keys[i]);
+					if (key)
+						break;
+				}
+			}
+			if (key)
+				rx->key = key;
+		}
 		return RX_CONTINUE;
 	} else {
 		u8 keyid;
@@ -1102,8 +1101,6 @@ static void ap_sta_ps_end(struct sta_info *sta)
 
 	atomic_dec(&sdata->bss->num_sta_ps);
 
-	clear_sta_flags(sta, WLAN_STA_PS_STA);
-
 #ifdef CONFIG_MAC80211_VERBOSE_PS_DEBUG
 	printk(KERN_DEBUG "%s: STA %pM aid %d exits power save mode\n",
 	       sdata->name, sta->sta.addr, sta->sta.aid);
@@ -1158,12 +1155,14 @@ ieee80211_rx_h_sta_process(struct ieee80211_rx_data *rx)
 	sta->rx_fragments++;
 	sta->rx_bytes += rx->skb->len;
 	sta->last_signal = status->signal;
+	ewma_add(&sta->avg_signal, -status->signal);
 
 	/*
 	 * Change STA power saving mode only at the end of a frame
 	 * exchange sequence.
 	 */
 	if (!ieee80211_has_morefrags(hdr->frame_control) &&
+	    !(status->rx_flags & IEEE80211_RX_DEFERRED_RELEASE) &&
 	    (rx->sdata->vif.type == NL80211_IFTYPE_AP ||
 	     rx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN)) {
 		if (test_sta_flags(sta, WLAN_STA_PS_STA)) {
@@ -1515,12 +1514,30 @@ ieee80211_drop_unencrypted_mgmt(struct ieee80211_rx_data *rx)
 	if (rx->sta && test_sta_flags(rx->sta, WLAN_STA_MFP)) {
 		if (unlikely(!ieee80211_has_protected(fc) &&
 			     ieee80211_is_unicast_robust_mgmt_frame(rx->skb) &&
-			     rx->key))
+			     rx->key)) {
+			if (ieee80211_is_deauth(fc))
+				cfg80211_send_unprot_deauth(rx->sdata->dev,
+							    rx->skb->data,
+							    rx->skb->len);
+			else if (ieee80211_is_disassoc(fc))
+				cfg80211_send_unprot_disassoc(rx->sdata->dev,
+							      rx->skb->data,
+							      rx->skb->len);
 			return -EACCES;
+		}
 		/* BIP does not use Protected field, so need to check MMIE */
 		if (unlikely(ieee80211_is_multicast_robust_mgmt_frame(rx->skb) &&
-			     ieee80211_get_mmie_keyidx(rx->skb) < 0))
+			     ieee80211_get_mmie_keyidx(rx->skb) < 0)) {
+			if (ieee80211_is_deauth(fc))
+				cfg80211_send_unprot_deauth(rx->sdata->dev,
+							    rx->skb->data,
+							    rx->skb->len);
+			else if (ieee80211_is_disassoc(fc))
+				cfg80211_send_unprot_disassoc(rx->sdata->dev,
+							      rx->skb->data,
+							      rx->skb->len);
 			return -EACCES;
+		}
 		/*
 		 * When using MFP, Action frames are not allowed prior to
 		 * having configured keys.
@@ -1791,6 +1808,8 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 			if (!fwd_skb && net_ratelimit())
 				printk(KERN_DEBUG "%s: failed to clone mesh frame\n",
 						   sdata->name);
+			if (!fwd_skb)
+				goto out;
 
 			fwd_hdr =  (struct ieee80211_hdr *) fwd_skb->data;
 			memcpy(fwd_hdr->addr2, sdata->vif.addr, ETH_ALEN);
@@ -1828,6 +1847,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80211_rx_data *rx)
 		}
 	}
 
+ out:
 	if (is_multicast_ether_addr(hdr->addr1) ||
 	    sdata->dev->flags & IFF_PROMISC)
 		return RX_CONTINUE;
@@ -1872,9 +1892,8 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
 	dev->stats.rx_packets++;
 	dev->stats.rx_bytes += rx->skb->len;
 
-	if (ieee80211_is_data(hdr->frame_control) &&
-	    !is_multicast_ether_addr(hdr->addr1) &&
-	    local->hw.conf.dynamic_ps_timeout > 0 && local->ps_sdata) {
+	if (local->ps_sdata && local->hw.conf.dynamic_ps_timeout > 0 &&
+	    !is_multicast_ether_addr(((struct ethhdr *)rx->skb->data)->h_dest)) {
 			mod_timer(&local->dynamic_ps_timer, jiffies +
 			 msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout));
 	}
@@ -1885,7 +1904,7 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx)
 }
 
 static ieee80211_rx_result debug_noinline
-ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx, struct sk_buff_head *frames)
+ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx)
 {
 	struct ieee80211_local *local = rx->local;
 	struct ieee80211_hw *hw = &local->hw;
@@ -1923,9 +1942,11 @@ ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx, struct sk_buff_head *frames)
 			mod_timer(&tid_agg_rx->session_timer,
 				  TU_TO_EXP_TIME(tid_agg_rx->timeout));
 
+		spin_lock(&tid_agg_rx->reorder_lock);
 		/* release stored frames up to start of BAR */
-		ieee80211_release_reorder_frames(hw, tid_agg_rx, start_seq_num,
-						 frames);
+		ieee80211_release_reorder_frames(hw, tid_agg_rx, start_seq_num);
+		spin_unlock(&tid_agg_rx->reorder_lock);
+
 		kfree_skb(skb);
 		return RX_QUEUED;
 	}
@@ -2116,10 +2137,13 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx)
 		}
 		break;
 	case WLAN_CATEGORY_MESH_PLINK:
-	case WLAN_CATEGORY_MESH_PATH_SEL:
 		if (!ieee80211_vif_is_mesh(&sdata->vif))
 			break;
 		goto queue;
+	case WLAN_CATEGORY_MESH_PATH_SEL:
+		if (!mesh_path_sel_is_hwmp(sdata))
+			break;
+		goto queue;
 	}
 
 	return RX_CONTINUE;
@@ -2247,6 +2271,10 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx)
 		break;
 	case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
 	case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
+		if (is_multicast_ether_addr(mgmt->da) &&
+		    !is_broadcast_ether_addr(mgmt->da))
+			return RX_DROP_MONITOR;
+
 		/* process only for station */
 		if (sdata->vif.type != NL80211_IFTYPE_STATION)
 			return RX_DROP_MONITOR;
@@ -2433,8 +2461,7 @@ static void ieee80211_rx_handlers_result(struct ieee80211_rx_data *rx,
 	}
 }
 
-static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx,
-				  struct sk_buff_head *frames)
+static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx)
 {
 	ieee80211_rx_result res = RX_DROP_MONITOR;
 	struct sk_buff *skb;
@@ -2446,7 +2473,15 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx,
 			goto rxh_next;  \
 	} while (0);
 
-	while ((skb = __skb_dequeue(frames))) {
+	spin_lock(&rx->local->rx_skb_queue.lock);
+	if (rx->local->running_rx_handler)
+		goto unlock;
+
+	rx->local->running_rx_handler = true;
+
+	while ((skb = __skb_dequeue(&rx->local->rx_skb_queue))) {
+		spin_unlock(&rx->local->rx_skb_queue.lock);
+
 		/*
 		 * all the other fields are valid across frames
 		 * that belong to an aMPDU since they are on the
@@ -2469,12 +2504,7 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx,
 			CALL_RXH(ieee80211_rx_h_mesh_fwding);
 #endif
 		CALL_RXH(ieee80211_rx_h_data)
-
-		/* special treatment -- needs the queue */
-		res = ieee80211_rx_h_ctrl(rx, frames);
-		if (res != RX_CONTINUE)
-			goto rxh_next;
-
+		CALL_RXH(ieee80211_rx_h_ctrl);
 		CALL_RXH(ieee80211_rx_h_mgmt_check)
 		CALL_RXH(ieee80211_rx_h_action)
 		CALL_RXH(ieee80211_rx_h_userspace_mgmt)
@@ -2483,18 +2513,20 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx,
 
  rxh_next:
 		ieee80211_rx_handlers_result(rx, res);
-
+		spin_lock(&rx->local->rx_skb_queue.lock);
 #undef CALL_RXH
 	}
+
+	rx->local->running_rx_handler = false;
+
+ unlock:
+	spin_unlock(&rx->local->rx_skb_queue.lock);
 }
 
 static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx)
 {
-	struct sk_buff_head reorder_release;
 	ieee80211_rx_result res = RX_DROP_MONITOR;
 
-	__skb_queue_head_init(&reorder_release);
-
 #define CALL_RXH(rxh)			\
 	do {				\
 		res = rxh(rx);		\
@@ -2505,9 +2537,9 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx)
 	CALL_RXH(ieee80211_rx_h_passive_scan)
 	CALL_RXH(ieee80211_rx_h_check)
 
-	ieee80211_rx_reorder_ampdu(rx, &reorder_release);
+	ieee80211_rx_reorder_ampdu(rx);
 
-	ieee80211_rx_handlers(rx, &reorder_release);
+	ieee80211_rx_handlers(rx);
 	return;
 
  rxh_next:
@@ -2517,13 +2549,11 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx)
 }
 
 /*
- * This function makes calls into the RX path. Therefore the
- * caller must hold the sta_info->lock and everything has to
- * be under rcu_read_lock protection as well.
+ * This function makes calls into the RX path, therefore
+ * it has to be invoked under RCU read lock.
  */
 void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid)
 {
-	struct sk_buff_head frames;
 	struct ieee80211_rx_data rx = {
 		.sta = sta,
 		.sdata = sta->sdata,
@@ -2536,13 +2566,11 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid)
 	if (!tid_agg_rx)
 		return;
 
-	__skb_queue_head_init(&frames);
-
 	spin_lock(&tid_agg_rx->reorder_lock);
-	ieee80211_sta_reorder_release(&sta->local->hw, tid_agg_rx, &frames);
+	ieee80211_sta_reorder_release(&sta->local->hw, tid_agg_rx);
 	spin_unlock(&tid_agg_rx->reorder_lock);
 
-	ieee80211_rx_handlers(&rx, &frames);
+	ieee80211_rx_handlers(&rx);
 }
 
 /* main receive path */
@@ -2741,6 +2769,7 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 
 			if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
 				return;
+			goto out;
 		}
 	}
 
@@ -2780,6 +2809,7 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 			return;
 	}
 
+ out:
 	dev_kfree_skb(skb);
 }
 
@@ -2875,6 +2905,9 @@ void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		return;
 	}
 
+	ieee80211_tpt_led_trig_rx(local,
+			((struct ieee80211_hdr *)skb->data)->frame_control,
+			skb->len);
 	__ieee80211_rx_handle_packet(hw, skb);
 
 	rcu_read_unlock();
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 6d8f897d876..c426504ed1c 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -199,8 +199,11 @@ static void sta_unblock(struct work_struct *wk)
 
 	if (!test_sta_flags(sta, WLAN_STA_PS_STA))
 		ieee80211_sta_ps_deliver_wakeup(sta);
-	else if (test_and_clear_sta_flags(sta, WLAN_STA_PSPOLL))
+	else if (test_and_clear_sta_flags(sta, WLAN_STA_PSPOLL)) {
+		clear_sta_flags(sta, WLAN_STA_PS_DRIVER);
 		ieee80211_sta_ps_deliver_poll_response(sta);
+	} else
+		clear_sta_flags(sta, WLAN_STA_PS_DRIVER);
 }
 
 static int sta_prepare_rate_control(struct ieee80211_local *local,
@@ -241,6 +244,8 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata,
 	sta->local = local;
 	sta->sdata = sdata;
 
+	ewma_init(&sta->avg_signal, 1024, 8);
+
 	if (sta_prepare_rate_control(local, sta, gfp)) {
 		kfree(sta);
 		return NULL;
@@ -880,6 +885,13 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif,
 }
 EXPORT_SYMBOL(ieee80211_find_sta);
 
+static void clear_sta_ps_flags(void *_sta)
+{
+	struct sta_info *sta = _sta;
+
+	clear_sta_flags(sta, WLAN_STA_PS_DRIVER | WLAN_STA_PS_STA);
+}
+
 /* powersave support code */
 void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
 {
@@ -894,7 +906,8 @@ void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta)
 
 	/* Send all buffered frames to the station */
 	sent = ieee80211_add_pending_skbs(local, &sta->tx_filtered);
-	buffered = ieee80211_add_pending_skbs(local, &sta->ps_tx_buf);
+	buffered = ieee80211_add_pending_skbs_fn(local, &sta->ps_tx_buf,
+						 clear_sta_ps_flags, sta);
 	sent += buffered;
 	local->total_ps_buffered -= buffered;
 
@@ -973,7 +986,7 @@ void ieee80211_sta_block_awake(struct ieee80211_hw *hw,
 
 	if (block)
 		set_sta_flags(sta, WLAN_STA_PS_DRIVER);
-	else
+	else if (test_sta_flags(sta, WLAN_STA_PS_DRIVER))
 		ieee80211_queue_work(hw, &sta->drv_unblock_wk);
 }
 EXPORT_SYMBOL(ieee80211_sta_block_awake);
diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h
index 9265acadef3..bbdd2a86a94 100644
--- a/net/mac80211/sta_info.h
+++ b/net/mac80211/sta_info.h
@@ -13,6 +13,7 @@
 #include <linux/types.h>
 #include <linux/if_ether.h>
 #include <linux/workqueue.h>
+#include <linux/average.h>
 #include "key.h"
 
 /**
@@ -77,23 +78,26 @@ enum ieee80211_sta_info_flags {
  * @addba_resp_timer: timer for peer's response to addba request
  * @pending: pending frames queue -- use sta's spinlock to protect
  * @dialog_token: dialog token for aggregation session
+ * @timeout: session timeout value to be filled in ADDBA requests
  * @state: session state (see above)
  * @stop_initiator: initiator of a session stop
  * @tx_stop: TX DelBA frame when stopping
  *
- * This structure is protected by RCU and the per-station
- * spinlock. Assignments to the array holding it must hold
- * the spinlock, only the TX path can access it under RCU
- * lock-free if, and only if, the state has  the flag
- * %HT_AGG_STATE_OPERATIONAL set. Otherwise, the TX path
- * must also acquire the spinlock and re-check the state,
- * see comments in the tx code touching it.
+ * This structure's lifetime is managed by RCU, assignments to
+ * the array holding it must hold the aggregation mutex.
+ *
+ * The TX path can access it under RCU lock-free if, and
+ * only if, the state has the flag %HT_AGG_STATE_OPERATIONAL
+ * set. Otherwise, the TX path must also acquire the spinlock
+ * and re-check the state, see comments in the tx code
+ * touching it.
  */
 struct tid_ampdu_tx {
 	struct rcu_head rcu_head;
 	struct timer_list addba_resp_timer;
 	struct sk_buff_head pending;
 	unsigned long state;
+	u16 timeout;
 	u8 dialog_token;
 	u8 stop_initiator;
 	bool tx_stop;
@@ -115,15 +119,13 @@ struct tid_ampdu_tx {
  * @rcu_head: RCU head used for freeing this struct
  * @reorder_lock: serializes access to reorder buffer, see below.
  *
- * This structure is protected by RCU and the per-station
- * spinlock. Assignments to the array holding it must hold
- * the spinlock.
+ * This structure's lifetime is managed by RCU, assignments to
+ * the array holding it must hold the aggregation mutex.
  *
- * The @reorder_lock is used to protect the variables and
- * arrays such as @reorder_buf, @reorder_time, @head_seq_num,
- * @stored_mpdu_num and @reorder_time from being corrupted by
- * concurrent access of the RX path and the expired frame
- * release timer.
+ * The @reorder_lock is used to protect the members of this
+ * struct, except for @timeout, @buf_size and @dialog_token,
+ * which are constant across the lifetime of the struct (the
+ * dialog token being used only for debugging).
  */
 struct tid_ampdu_rx {
 	struct rcu_head rcu_head;
@@ -224,6 +226,7 @@ enum plink_state {
  * @rx_fragments: number of received MPDUs
  * @rx_dropped: number of dropped MPDUs from this STA
  * @last_signal: signal of last received frame from this STA
+ * @avg_signal: moving average of signal of received frames from this STA
  * @last_seq_ctrl: last received seq/frag number from this STA (per RX queue)
  * @tx_filtered_count: number of frames the hardware filtered for this STA
  * @tx_retry_failed: number of frames that failed retry
@@ -248,6 +251,7 @@ enum plink_state {
  * @sta: station information we share with the driver
  * @dead: set to true when sta is unlinked
  * @uploaded: set to true when sta is uploaded to the driver
+ * @lost_packets: number of consecutive lost packets
  */
 struct sta_info {
 	/* General information, mostly static */
@@ -291,6 +295,7 @@ struct sta_info {
 	unsigned long rx_fragments;
 	unsigned long rx_dropped;
 	int last_signal;
+	struct ewma avg_signal;
 	__le16 last_seq_ctrl[NUM_RX_DATA_QUEUES];
 
 	/* Updated from TX status path only, no locking requirements */
@@ -335,6 +340,8 @@ struct sta_info {
 	} debugfs;
 #endif
 
+	unsigned int lost_packets;
+
 	/* keep last! */
 	struct ieee80211_sta sta;
 };
diff --git a/net/mac80211/status.c b/net/mac80211/status.c
index 3153c19893b..38a797217a9 100644
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -157,6 +157,15 @@ static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb)
 	}
 }
 
+/*
+ * Use a static threshold for now, best value to be determined
+ * by testing ...
+ * Should it depend on:
+ *  - on # of retransmissions
+ *  - current throughput (higher value for higher tpt)?
+ */
+#define STA_LOST_PKT_THRESHOLD	50
+
 void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct sk_buff *skb2;
@@ -173,6 +182,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 	int retry_count = -1, i;
 	int rates_idx = -1;
 	bool send_to_cooked;
+	bool acked;
 
 	for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) {
 		/* the HW cannot have attempted that rate */
@@ -198,8 +208,8 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 		if (memcmp(hdr->addr2, sta->sdata->vif.addr, ETH_ALEN))
 			continue;
 
-		if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
-		    test_sta_flags(sta, WLAN_STA_PS_STA)) {
+		acked = !!(info->flags & IEEE80211_TX_STAT_ACK);
+		if (!acked && test_sta_flags(sta, WLAN_STA_PS_STA)) {
 			/*
 			 * The STA is in power save mode, so assume
 			 * that this TX packet failed because of that.
@@ -231,7 +241,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 			rcu_read_unlock();
 			return;
 		} else {
-			if (!(info->flags & IEEE80211_TX_STAT_ACK))
+			if (!acked)
 				sta->tx_retry_failed++;
 			sta->tx_retry_count += retry_count;
 		}
@@ -240,9 +250,25 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 		if (ieee80211_vif_is_mesh(&sta->sdata->vif))
 			ieee80211s_update_metric(local, sta, skb);
 
-		if (!(info->flags & IEEE80211_TX_CTL_INJECTED) &&
-		    (info->flags & IEEE80211_TX_STAT_ACK))
+		if (!(info->flags & IEEE80211_TX_CTL_INJECTED) && acked)
 			ieee80211_frame_acked(sta, skb);
+
+		if ((sta->sdata->vif.type == NL80211_IFTYPE_STATION) &&
+		    (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS))
+			ieee80211_sta_tx_notify(sta->sdata, (void *) skb->data, acked);
+
+		if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
+			if (info->flags & IEEE80211_TX_STAT_ACK) {
+				if (sta->lost_packets)
+					sta->lost_packets = 0;
+			} else if (++sta->lost_packets >= STA_LOST_PKT_THRESHOLD) {
+				cfg80211_cqm_pktloss_notify(sta->sdata->dev,
+							    sta->sta.addr,
+							    sta->lost_packets,
+							    GFP_ATOMIC);
+				sta->lost_packets = 0;
+			}
+		}
 	}
 
 	rcu_read_unlock();
@@ -295,10 +321,23 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
 					msecs_to_jiffies(10));
 	}
 
-	if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX)
+	if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX) {
+		struct ieee80211_work *wk;
+
+		rcu_read_lock();
+		list_for_each_entry_rcu(wk, &local->work_list, list) {
+			if (wk->type != IEEE80211_WORK_OFFCHANNEL_TX)
+				continue;
+			if (wk->offchan_tx.frame != skb)
+				continue;
+			wk->offchan_tx.frame = NULL;
+			break;
+		}
+		rcu_read_unlock();
 		cfg80211_mgmt_tx_status(
 			skb->dev, (unsigned long) skb, skb->data, skb->len,
 			!!(info->flags & IEEE80211_TX_STAT_ACK), GFP_ATOMIC);
+	}
 
 	/* this was a transmitted frame, but now we want to reuse it */
 	skb_orphan(skb);
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 96c59430950..5950e3abead 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -539,7 +539,11 @@ ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx)
 		 ieee80211_is_robust_mgmt_frame(hdr) &&
 		 (key = rcu_dereference(tx->sdata->default_mgmt_key)))
 		tx->key = key;
-	else if ((key = rcu_dereference(tx->sdata->default_key)))
+	else if (is_multicast_ether_addr(hdr->addr1) &&
+		 (key = rcu_dereference(tx->sdata->default_multicast_key)))
+		tx->key = key;
+	else if (!is_multicast_ether_addr(hdr->addr1) &&
+		 (key = rcu_dereference(tx->sdata->default_unicast_key)))
 		tx->key = key;
 	else if (tx->sdata->drop_unencrypted &&
 		 (tx->skb->protocol != tx->sdata->control_port_protocol) &&
@@ -622,7 +626,8 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
 		txrc.max_rate_idx = -1;
 	else
 		txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1;
-	txrc.ap = tx->sdata->vif.type == NL80211_IFTYPE_AP;
+	txrc.bss = (tx->sdata->vif.type == NL80211_IFTYPE_AP ||
+		    tx->sdata->vif.type == NL80211_IFTYPE_ADHOC);
 
 	/* set up RTS protection if desired */
 	if (len > tx->local->hw.wiphy->rts_threshold) {
@@ -665,10 +670,11 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
 	if (unlikely(info->control.rates[0].idx < 0))
 		return TX_DROP;
 
-	if (txrc.reported_rate.idx < 0)
+	if (txrc.reported_rate.idx < 0) {
 		txrc.reported_rate = info->control.rates[0];
-
-	if (tx->sta)
+		if (tx->sta && ieee80211_is_data(hdr->frame_control))
+			tx->sta->last_tx_rate = txrc.reported_rate;
+	} else if (tx->sta)
 		tx->sta->last_tx_rate = txrc.reported_rate;
 
 	if (unlikely(!info->control.rates[0].count))
@@ -1033,6 +1039,7 @@ static bool __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 	struct ieee80211_radiotap_header *rthdr =
 		(struct ieee80211_radiotap_header *) skb->data;
 	struct ieee80211_supported_band *sband;
+	bool hw_frag;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len,
 						   NULL);
@@ -1042,6 +1049,9 @@ static bool __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 	info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
 	tx->flags &= ~IEEE80211_TX_FRAGMENTED;
 
+	/* packet is fragmented in HW if we have a non-NULL driver callback */
+	hw_frag = (tx->local->ops->set_frag_threshold != NULL);
+
 	/*
 	 * for every radiotap entry that is present
 	 * (ieee80211_radiotap_iterator_next returns -ENOENT when no more
@@ -1078,7 +1088,8 @@ static bool __ieee80211_parse_tx_radiotap(struct ieee80211_tx_data *tx,
 			}
 			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP)
 				info->flags &= ~IEEE80211_TX_INTFL_DONT_ENCRYPT;
-			if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG)
+			if ((*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) &&
+								!hw_frag)
 				tx->flags |= IEEE80211_TX_FRAGMENTED;
 			break;
 
@@ -1181,8 +1192,10 @@ ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata,
 	/*
 	 * Set this flag (used below to indicate "automatic fragmentation"),
 	 * it will be cleared/left by radiotap as desired.
+	 * Only valid when fragmentation is done by the stack.
 	 */
-	tx->flags |= IEEE80211_TX_FRAGMENTED;
+	if (!local->ops->set_frag_threshold)
+		tx->flags |= IEEE80211_TX_FRAGMENTED;
 
 	/* process and remove the injection radiotap header */
 	if (unlikely(info->flags & IEEE80211_TX_INTFL_HAS_RADIOTAP)) {
@@ -1284,6 +1297,7 @@ static int __ieee80211_tx(struct ieee80211_local *local,
 
 	while (skb) {
 		int q = skb_get_queue_mapping(skb);
+		__le16 fc;
 
 		spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
 		ret = IEEE80211_TX_OK;
@@ -1326,6 +1340,7 @@ static int __ieee80211_tx(struct ieee80211_local *local,
 		else
 			info->control.sta = NULL;
 
+		fc = ((struct ieee80211_hdr *)skb->data)->frame_control;
 		ret = drv_tx(local, skb);
 		if (WARN_ON(ret != NETDEV_TX_OK && skb->len != len)) {
 			dev_kfree_skb(skb);
@@ -1336,6 +1351,7 @@ static int __ieee80211_tx(struct ieee80211_local *local,
 			return IEEE80211_TX_AGAIN;
 		}
 
+		ieee80211_tpt_led_trig_tx(local, fc, len);
 		*skbp = skb = next;
 		ieee80211_led_tx(local, 1);
 		fragm = true;
@@ -1533,8 +1549,10 @@ static int ieee80211_skb_resize(struct ieee80211_local *local,
 
 	if (skb_header_cloned(skb))
 		I802_DEBUG_INC(local->tx_expand_skb_head_cloned);
-	else
+	else if (head_need || tail_need)
 		I802_DEBUG_INC(local->tx_expand_skb_head);
+	else
+		return 0;
 
 	if (pskb_expand_head(skb, head_need, tail_need, GFP_ATOMIC)) {
 		wiphy_debug(local->hw.wiphy,
@@ -1587,7 +1605,12 @@ static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata,
 						list) {
 				if (!ieee80211_sdata_running(tmp_sdata))
 					continue;
-				if (tmp_sdata->vif.type != NL80211_IFTYPE_AP)
+				if (tmp_sdata->vif.type ==
+				    NL80211_IFTYPE_MONITOR ||
+				    tmp_sdata->vif.type ==
+				    NL80211_IFTYPE_AP_VLAN ||
+					tmp_sdata->vif.type ==
+				    NL80211_IFTYPE_WDS)
 					continue;
 				if (compare_ether_addr(tmp_sdata->vif.addr,
 						       hdr->addr2) == 0) {
@@ -1721,26 +1744,25 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 {
 	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
 	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct ieee80211_tx_info *info;
 	int ret = NETDEV_TX_BUSY, head_need;
 	u16 ethertype, hdrlen,  meshhdrlen = 0;
 	__le16 fc;
 	struct ieee80211_hdr hdr;
 	struct ieee80211s_hdr mesh_hdr __maybe_unused;
+	struct mesh_path *mppath = NULL;
 	const u8 *encaps_data;
 	int encaps_len, skip_header_bytes;
 	int nh_pos, h_pos;
 	struct sta_info *sta = NULL;
 	u32 sta_flags = 0;
+	struct sk_buff *tmp_skb;
 
 	if (unlikely(skb->len < ETH_HLEN)) {
 		ret = NETDEV_TX_OK;
 		goto fail;
 	}
 
-	nh_pos = skb_network_header(skb) - skb->data;
-	h_pos = skb_transport_header(skb) - skb->data;
-
 	/* convert Ethernet header to proper 802.11 header (based on
 	 * operation mode) */
 	ethertype = (skb->data[12] << 8) | skb->data[13];
@@ -1789,16 +1811,23 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 			ret = NETDEV_TX_OK;
 			goto fail;
 		}
+		if (!is_multicast_ether_addr(skb->data))
+			mppath = mpp_path_lookup(skb->data, sdata);
 
+		/*
+		 * Do not use address extension, if it is a packet from
+		 * the same interface and the destination is not being
+		 * proxied by any other mest point.
+		 */
 		if (compare_ether_addr(sdata->vif.addr,
-				       skb->data + ETH_ALEN) == 0) {
+				       skb->data + ETH_ALEN) == 0 &&
+		    (!mppath || !compare_ether_addr(mppath->mpp, skb->data))) {
 			hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc,
 					skb->data, skb->data + ETH_ALEN);
 			meshhdrlen = ieee80211_new_mesh_header(&mesh_hdr,
-					sdata, NULL, NULL, NULL);
+					sdata, NULL, NULL);
 		} else {
 			/* packet from other interface */
-			struct mesh_path *mppath;
 			int is_mesh_mcast = 1;
 			const u8 *mesh_da;
 
@@ -1809,8 +1838,6 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 			else {
 				static const u8 bcast[ETH_ALEN] =
 					{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
-
-				mppath = mpp_path_lookup(skb->data, sdata);
 				if (mppath) {
 					/* RA TA mDA mSA AE:DA SA */
 					mesh_da = mppath->mpp;
@@ -1828,13 +1855,11 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 					ieee80211_new_mesh_header(&mesh_hdr,
 							sdata,
 							skb->data + ETH_ALEN,
-							NULL,
 							NULL);
 			else
 				meshhdrlen =
 					ieee80211_new_mesh_header(&mesh_hdr,
 							sdata,
-							NULL,
 							skb->data,
 							skb->data + ETH_ALEN);
 
@@ -1913,6 +1938,20 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 		goto fail;
 	}
 
+	/*
+	 * If the skb is shared we need to obtain our own copy.
+	 */
+	if (skb_shared(skb)) {
+		tmp_skb = skb;
+		skb = skb_clone(skb, GFP_ATOMIC);
+		kfree_skb(tmp_skb);
+
+		if (!skb) {
+			ret = NETDEV_TX_OK;
+			goto fail;
+		}
+	}
+
 	hdr.frame_control = fc;
 	hdr.duration_id = 0;
 	hdr.seq_ctrl = 0;
@@ -1931,6 +1970,9 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 		encaps_len = 0;
 	}
 
+	nh_pos = skb_network_header(skb) - skb->data;
+	h_pos = skb_transport_header(skb) - skb->data;
+
 	skb_pull(skb, skip_header_bytes);
 	nh_pos -= skip_header_bytes;
 	h_pos -= skip_header_bytes;
@@ -1997,6 +2039,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 	skb_set_network_header(skb, nh_pos);
 	skb_set_transport_header(skb, h_pos);
 
+	info = IEEE80211_SKB_CB(skb);
 	memset(info, 0, sizeof(*info));
 
 	dev->trans_start = jiffies;
@@ -2257,7 +2300,8 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 		u8 *pos;
 
 		/* headroom, head length, tail length and maximum TIM length */
-		skb = dev_alloc_skb(local->tx_headroom + 400);
+		skb = dev_alloc_skb(local->tx_headroom + 400 +
+				sdata->u.mesh.vendor_ie_len);
 		if (!skb)
 			goto out;
 
@@ -2301,7 +2345,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
 		txrc.max_rate_idx = -1;
 	else
 		txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1;
-	txrc.ap = true;
+	txrc.bss = true;
 	rate_control_get_rate(sdata, NULL, &txrc);
 
 	info->control.vif = vif;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 0b6fc92bc0d..cf68700abff 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -368,8 +368,9 @@ void ieee80211_add_pending_skb(struct ieee80211_local *local,
 	spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
 }
 
-int ieee80211_add_pending_skbs(struct ieee80211_local *local,
-			       struct sk_buff_head *skbs)
+int ieee80211_add_pending_skbs_fn(struct ieee80211_local *local,
+				  struct sk_buff_head *skbs,
+				  void (*fn)(void *data), void *data)
 {
 	struct ieee80211_hw *hw = &local->hw;
 	struct sk_buff *skb;
@@ -394,6 +395,9 @@ int ieee80211_add_pending_skbs(struct ieee80211_local *local,
 		__skb_queue_tail(&local->pending[queue], skb);
 	}
 
+	if (fn)
+		fn(data);
+
 	for (i = 0; i < hw->queues; i++)
 		__ieee80211_wake_queue(hw, i,
 			IEEE80211_QUEUE_STOP_REASON_SKB_ADD);
@@ -402,6 +406,12 @@ int ieee80211_add_pending_skbs(struct ieee80211_local *local,
 	return ret;
 }
 
+int ieee80211_add_pending_skbs(struct ieee80211_local *local,
+			       struct sk_buff_head *skbs)
+{
+	return ieee80211_add_pending_skbs_fn(local, skbs, NULL, NULL);
+}
+
 void ieee80211_stop_queues_by_reason(struct ieee80211_hw *hw,
 				    enum queue_stop_reason reason)
 {
@@ -1011,9 +1021,10 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
 	return pos - buffer;
 }
 
-void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
-			      const u8 *ssid, size_t ssid_len,
-			      const u8 *ie, size_t ie_len)
+struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata,
+					  u8 *dst,
+					  const u8 *ssid, size_t ssid_len,
+					  const u8 *ie, size_t ie_len)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct sk_buff *skb;
@@ -1027,7 +1038,7 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
 	if (!buf) {
 		printk(KERN_DEBUG "%s: failed to allocate temporary IE "
 		       "buffer\n", sdata->name);
-		return;
+		return NULL;
 	}
 
 	chan = ieee80211_frequency_to_channel(
@@ -1050,8 +1061,20 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
 	}
 
 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
-	ieee80211_tx_skb(sdata, skb);
 	kfree(buf);
+
+	return skb;
+}
+
+void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst,
+			      const u8 *ssid, size_t ssid_len,
+			      const u8 *ie, size_t ie_len)
+{
+	struct sk_buff *skb;
+
+	skb = ieee80211_build_probe_req(sdata, dst, ssid, ssid_len, ie, ie_len);
+	if (skb)
+		ieee80211_tx_skb(sdata, skb);
 }
 
 u32 ieee80211_sta_get_rates(struct ieee80211_local *local,
@@ -1093,6 +1116,7 @@ u32 ieee80211_sta_get_rates(struct ieee80211_local *local,
 void ieee80211_stop_device(struct ieee80211_local *local)
 {
 	ieee80211_led_radio(local, false);
+	ieee80211_mod_tpt_led_trig(local, 0, IEEE80211_TPT_LEDTRIG_FL_RADIO);
 
 	cancel_work_sync(&local->reconfig_filter);
 
@@ -1127,6 +1151,8 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		}
 
 		ieee80211_led_radio(local, true);
+		ieee80211_mod_tpt_led_trig(local,
+					   IEEE80211_TPT_LEDTRIG_FL_RADIO, 0);
 	}
 
 	/* add interfaces */
@@ -1152,6 +1178,9 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	}
 	mutex_unlock(&local->sta_mtx);
 
+	/* setup fragmentation threshold */
+	drv_set_frag_threshold(local, hw->wiphy->frag_threshold);
+
 	/* setup RTS threshold */
 	drv_set_rts_threshold(local, hw->wiphy->rts_threshold);
 
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 34e6d02da77..28bc084dbfb 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -21,7 +21,16 @@
 /* Default mapping in classifier to work with default
  * queue setup.
  */
-const int ieee802_1d_to_ac[8] = { 2, 3, 3, 2, 1, 1, 0, 0 };
+const int ieee802_1d_to_ac[8] = {
+	IEEE80211_AC_BE,
+	IEEE80211_AC_BK,
+	IEEE80211_AC_BK,
+	IEEE80211_AC_BE,
+	IEEE80211_AC_VI,
+	IEEE80211_AC_VI,
+	IEEE80211_AC_VO,
+	IEEE80211_AC_VO
+};
 
 static int wme_downgrade_ac(struct sk_buff *skb)
 {
@@ -50,26 +59,22 @@ u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
 {
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta = NULL;
-	u32 sta_flags = 0;
 	const u8 *ra = NULL;
 	bool qos = false;
 
 	if (local->hw.queues < 4 || skb->len < 6) {
 		skb->priority = 0; /* required for correct WPA/11i MIC */
-		return min_t(u16, local->hw.queues - 1,
-			     ieee802_1d_to_ac[skb->priority]);
+		return min_t(u16, local->hw.queues - 1, IEEE80211_AC_BE);
 	}
 
 	rcu_read_lock();
 	switch (sdata->vif.type) {
 	case NL80211_IFTYPE_AP_VLAN:
-		rcu_read_lock();
 		sta = rcu_dereference(sdata->u.vlan.sta);
-		if (sta)
-			sta_flags = get_sta_flags(sta);
-		rcu_read_unlock();
-		if (sta)
+		if (sta) {
+			qos = get_sta_flags(sta) & WLAN_STA_WME;
 			break;
+		}
 	case NL80211_IFTYPE_AP:
 		ra = skb->data;
 		break;
@@ -98,17 +103,13 @@ u16 ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
 	if (!sta && ra && !is_multicast_ether_addr(ra)) {
 		sta = sta_info_get(sdata, ra);
 		if (sta)
-			sta_flags = get_sta_flags(sta);
+			qos = get_sta_flags(sta) & WLAN_STA_WME;
 	}
-
-	if (sta_flags & WLAN_STA_WME)
-		qos = true;
-
 	rcu_read_unlock();
 
 	if (!qos) {
 		skb->priority = 0; /* required for correct WPA/11i MIC */
-		return ieee802_1d_to_ac[skb->priority];
+		return IEEE80211_AC_BE;
 	}
 
 	/* use the data classifier to determine what 802.1d tag the
diff --git a/net/mac80211/work.c b/net/mac80211/work.c
index ae344d1ba05..36305e0d06e 100644
--- a/net/mac80211/work.c
+++ b/net/mac80211/work.c
@@ -458,8 +458,9 @@ ieee80211_direct_probe(struct ieee80211_work *wk)
 		return WORK_ACT_TIMEOUT;
 	}
 
-	printk(KERN_DEBUG "%s: direct probe to %pM (try %d)\n",
-			sdata->name, wk->filter_ta, wk->probe_auth.tries);
+	printk(KERN_DEBUG "%s: direct probe to %pM (try %d/%i)\n",
+	       sdata->name, wk->filter_ta, wk->probe_auth.tries,
+	       IEEE80211_AUTH_MAX_TRIES);
 
 	/*
 	 * Direct probe is sent to broadcast address as some APs
@@ -561,6 +562,25 @@ ieee80211_remain_on_channel_timeout(struct ieee80211_work *wk)
 }
 
 static enum work_action __must_check
+ieee80211_offchannel_tx(struct ieee80211_work *wk)
+{
+	if (!wk->started) {
+		wk->timeout = jiffies + msecs_to_jiffies(wk->offchan_tx.wait);
+
+		/*
+		 * After this, offchan_tx.frame remains but now is no
+		 * longer a valid pointer -- we still need it as the
+		 * cookie for canceling this work.
+		 */
+		ieee80211_tx_skb(wk->sdata, wk->offchan_tx.frame);
+
+		return WORK_ACT_NONE;
+	}
+
+	return WORK_ACT_TIMEOUT;
+}
+
+static enum work_action __must_check
 ieee80211_assoc_beacon_wait(struct ieee80211_work *wk)
 {
 	if (wk->started)
@@ -955,6 +975,9 @@ static void ieee80211_work_work(struct work_struct *work)
 		case IEEE80211_WORK_REMAIN_ON_CHANNEL:
 			rma = ieee80211_remain_on_channel_timeout(wk);
 			break;
+		case IEEE80211_WORK_OFFCHANNEL_TX:
+			rma = ieee80211_offchannel_tx(wk);
+			break;
 		case IEEE80211_WORK_ASSOC_BEACON_WAIT:
 			rma = ieee80211_assoc_beacon_wait(wk);
 			break;
@@ -1051,11 +1074,13 @@ void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_work *wk;
+	bool cleanup = false;
 
 	mutex_lock(&local->mtx);
 	list_for_each_entry(wk, &local->work_list, list) {
 		if (wk->sdata != sdata)
 			continue;
+		cleanup = true;
 		wk->type = IEEE80211_WORK_ABORT;
 		wk->started = true;
 		wk->timeout = jiffies;
@@ -1063,7 +1088,8 @@ void ieee80211_work_purge(struct ieee80211_sub_if_data *sdata)
 	mutex_unlock(&local->mtx);
 
 	/* run cleanups etc. */
-	ieee80211_work_work(&local->work_work);
+	if (cleanup)
+		ieee80211_work_work(&local->work_work);
 
 	mutex_lock(&local->mtx);
 	list_for_each_entry(wk, &local->work_list, list) {
diff --git a/net/netfilter/core.c b/net/netfilter/core.c
index 5faec4fd819..e69d537362c 100644
--- a/net/netfilter/core.c
+++ b/net/netfilter/core.c
@@ -173,9 +173,11 @@ next_hook:
 			     outdev, &elem, okfn, hook_thresh);
 	if (verdict == NF_ACCEPT || verdict == NF_STOP) {
 		ret = 1;
-	} else if (verdict == NF_DROP) {
+	} else if ((verdict & NF_VERDICT_MASK) == NF_DROP) {
 		kfree_skb(skb);
-		ret = -EPERM;
+		ret = -(verdict >> NF_VERDICT_BITS);
+		if (ret == 0)
+			ret = -EPERM;
 	} else if ((verdict & NF_VERDICT_MASK) == NF_QUEUE) {
 		if (!nf_queue(skb, elem, pf, hook, indev, outdev, okfn,
 			      verdict >> NF_VERDICT_BITS))
diff --git a/net/netfilter/ipvs/Kconfig b/net/netfilter/ipvs/Kconfig
index a22dac22705..70bd1d0774c 100644
--- a/net/netfilter/ipvs/Kconfig
+++ b/net/netfilter/ipvs/Kconfig
@@ -4,6 +4,7 @@
 menuconfig IP_VS
 	tristate "IP virtual server support"
 	depends on NET && INET && NETFILTER
+	depends on (NF_CONNTRACK || NF_CONNTRACK=n)
 	---help---
 	  IP Virtual Server support will let you build a high-performance
 	  virtual server based on cluster of two or more real servers. This
diff --git a/net/netfilter/ipvs/ip_vs_app.c b/net/netfilter/ipvs/ip_vs_app.c
index a475edee091..5c48ffb60c2 100644
--- a/net/netfilter/ipvs/ip_vs_app.c
+++ b/net/netfilter/ipvs/ip_vs_app.c
@@ -43,11 +43,6 @@ EXPORT_SYMBOL(register_ip_vs_app);
 EXPORT_SYMBOL(unregister_ip_vs_app);
 EXPORT_SYMBOL(register_ip_vs_app_inc);
 
-/* ipvs application list head */
-static LIST_HEAD(ip_vs_app_list);
-static DEFINE_MUTEX(__ip_vs_app_mutex);
-
-
 /*
  *	Get an ip_vs_app object
  */
@@ -67,7 +62,8 @@ static inline void ip_vs_app_put(struct ip_vs_app *app)
  *	Allocate/initialize app incarnation and register it in proto apps.
  */
 static int
-ip_vs_app_inc_new(struct ip_vs_app *app, __u16 proto, __u16 port)
+ip_vs_app_inc_new(struct net *net, struct ip_vs_app *app, __u16 proto,
+		  __u16 port)
 {
 	struct ip_vs_protocol *pp;
 	struct ip_vs_app *inc;
@@ -98,7 +94,7 @@ ip_vs_app_inc_new(struct ip_vs_app *app, __u16 proto, __u16 port)
 		}
 	}
 
-	ret = pp->register_app(inc);
+	ret = pp->register_app(net, inc);
 	if (ret)
 		goto out;
 
@@ -119,7 +115,7 @@ ip_vs_app_inc_new(struct ip_vs_app *app, __u16 proto, __u16 port)
  *	Release app incarnation
  */
 static void
-ip_vs_app_inc_release(struct ip_vs_app *inc)
+ip_vs_app_inc_release(struct net *net, struct ip_vs_app *inc)
 {
 	struct ip_vs_protocol *pp;
 
@@ -127,7 +123,7 @@ ip_vs_app_inc_release(struct ip_vs_app *inc)
 		return;
 
 	if (pp->unregister_app)
-		pp->unregister_app(inc);
+		pp->unregister_app(net, inc);
 
 	IP_VS_DBG(9, "%s App %s:%u unregistered\n",
 		  pp->name, inc->name, ntohs(inc->port));
@@ -168,15 +164,17 @@ void ip_vs_app_inc_put(struct ip_vs_app *inc)
  *	Register an application incarnation in protocol applications
  */
 int
-register_ip_vs_app_inc(struct ip_vs_app *app, __u16 proto, __u16 port)
+register_ip_vs_app_inc(struct net *net, struct ip_vs_app *app, __u16 proto,
+		       __u16 port)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	int result;
 
-	mutex_lock(&__ip_vs_app_mutex);
+	mutex_lock(&ipvs->app_mutex);
 
-	result = ip_vs_app_inc_new(app, proto, port);
+	result = ip_vs_app_inc_new(net, app, proto, port);
 
-	mutex_unlock(&__ip_vs_app_mutex);
+	mutex_unlock(&ipvs->app_mutex);
 
 	return result;
 }
@@ -185,16 +183,17 @@ register_ip_vs_app_inc(struct ip_vs_app *app, __u16 proto, __u16 port)
 /*
  *	ip_vs_app registration routine
  */
-int register_ip_vs_app(struct ip_vs_app *app)
+int register_ip_vs_app(struct net *net, struct ip_vs_app *app)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	/* increase the module use count */
 	ip_vs_use_count_inc();
 
-	mutex_lock(&__ip_vs_app_mutex);
+	mutex_lock(&ipvs->app_mutex);
 
-	list_add(&app->a_list, &ip_vs_app_list);
+	list_add(&app->a_list, &ipvs->app_list);
 
-	mutex_unlock(&__ip_vs_app_mutex);
+	mutex_unlock(&ipvs->app_mutex);
 
 	return 0;
 }
@@ -204,19 +203,20 @@ int register_ip_vs_app(struct ip_vs_app *app)
  *	ip_vs_app unregistration routine
  *	We are sure there are no app incarnations attached to services
  */
-void unregister_ip_vs_app(struct ip_vs_app *app)
+void unregister_ip_vs_app(struct net *net, struct ip_vs_app *app)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct ip_vs_app *inc, *nxt;
 
-	mutex_lock(&__ip_vs_app_mutex);
+	mutex_lock(&ipvs->app_mutex);
 
 	list_for_each_entry_safe(inc, nxt, &app->incs_list, a_list) {
-		ip_vs_app_inc_release(inc);
+		ip_vs_app_inc_release(net, inc);
 	}
 
 	list_del(&app->a_list);
 
-	mutex_unlock(&__ip_vs_app_mutex);
+	mutex_unlock(&ipvs->app_mutex);
 
 	/* decrease the module use count */
 	ip_vs_use_count_dec();
@@ -226,7 +226,8 @@ void unregister_ip_vs_app(struct ip_vs_app *app)
 /*
  *	Bind ip_vs_conn to its ip_vs_app (called by cp constructor)
  */
-int ip_vs_bind_app(struct ip_vs_conn *cp, struct ip_vs_protocol *pp)
+int ip_vs_bind_app(struct ip_vs_conn *cp,
+		   struct ip_vs_protocol *pp)
 {
 	return pp->app_conn_bind(cp);
 }
@@ -481,11 +482,11 @@ int ip_vs_app_pkt_in(struct ip_vs_conn *cp, struct sk_buff *skb)
  *	/proc/net/ip_vs_app entry function
  */
 
-static struct ip_vs_app *ip_vs_app_idx(loff_t pos)
+static struct ip_vs_app *ip_vs_app_idx(struct netns_ipvs *ipvs, loff_t pos)
 {
 	struct ip_vs_app *app, *inc;
 
-	list_for_each_entry(app, &ip_vs_app_list, a_list) {
+	list_for_each_entry(app, &ipvs->app_list, a_list) {
 		list_for_each_entry(inc, &app->incs_list, a_list) {
 			if (pos-- == 0)
 				return inc;
@@ -497,19 +498,24 @@ static struct ip_vs_app *ip_vs_app_idx(loff_t pos)
 
 static void *ip_vs_app_seq_start(struct seq_file *seq, loff_t *pos)
 {
-	mutex_lock(&__ip_vs_app_mutex);
+	struct net *net = seq_file_net(seq);
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
-	return *pos ? ip_vs_app_idx(*pos - 1) : SEQ_START_TOKEN;
+	mutex_lock(&ipvs->app_mutex);
+
+	return *pos ? ip_vs_app_idx(ipvs, *pos - 1) : SEQ_START_TOKEN;
 }
 
 static void *ip_vs_app_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	struct ip_vs_app *inc, *app;
 	struct list_head *e;
+	struct net *net = seq_file_net(seq);
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
 	++*pos;
 	if (v == SEQ_START_TOKEN)
-		return ip_vs_app_idx(0);
+		return ip_vs_app_idx(ipvs, 0);
 
 	inc = v;
 	app = inc->app;
@@ -518,7 +524,7 @@ static void *ip_vs_app_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 		return list_entry(e, struct ip_vs_app, a_list);
 
 	/* go on to next application */
-	for (e = app->a_list.next; e != &ip_vs_app_list; e = e->next) {
+	for (e = app->a_list.next; e != &ipvs->app_list; e = e->next) {
 		app = list_entry(e, struct ip_vs_app, a_list);
 		list_for_each_entry(inc, &app->incs_list, a_list) {
 			return inc;
@@ -529,7 +535,9 @@ static void *ip_vs_app_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 
 static void ip_vs_app_seq_stop(struct seq_file *seq, void *v)
 {
-	mutex_unlock(&__ip_vs_app_mutex);
+	struct netns_ipvs *ipvs = net_ipvs(seq_file_net(seq));
+
+	mutex_unlock(&ipvs->app_mutex);
 }
 
 static int ip_vs_app_seq_show(struct seq_file *seq, void *v)
@@ -557,7 +565,8 @@ static const struct seq_operations ip_vs_app_seq_ops = {
 
 static int ip_vs_app_open(struct inode *inode, struct file *file)
 {
-	return seq_open(file, &ip_vs_app_seq_ops);
+	return seq_open_net(inode, file, &ip_vs_app_seq_ops,
+			    sizeof(struct seq_net_private));
 }
 
 static const struct file_operations ip_vs_app_fops = {
@@ -569,15 +578,36 @@ static const struct file_operations ip_vs_app_fops = {
 };
 #endif
 
-int __init ip_vs_app_init(void)
+static int __net_init __ip_vs_app_init(struct net *net)
 {
-	/* we will replace it with proc_net_ipvs_create() soon */
-	proc_net_fops_create(&init_net, "ip_vs_app", 0, &ip_vs_app_fops);
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	INIT_LIST_HEAD(&ipvs->app_list);
+	__mutex_init(&ipvs->app_mutex, "ipvs->app_mutex", &ipvs->app_key);
+	proc_net_fops_create(net, "ip_vs_app", 0, &ip_vs_app_fops);
 	return 0;
 }
 
+static void __net_exit __ip_vs_app_cleanup(struct net *net)
+{
+	proc_net_remove(net, "ip_vs_app");
+}
+
+static struct pernet_operations ip_vs_app_ops = {
+	.init = __ip_vs_app_init,
+	.exit = __ip_vs_app_cleanup,
+};
+
+int __init ip_vs_app_init(void)
+{
+	int rv;
+
+	rv = register_pernet_subsys(&ip_vs_app_ops);
+	return rv;
+}
+
 
 void ip_vs_app_cleanup(void)
 {
-	proc_net_remove(&init_net, "ip_vs_app");
+	unregister_pernet_subsys(&ip_vs_app_ops);
 }
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index 66e4662925d..83233fe24a0 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -64,9 +64,6 @@ static struct list_head *ip_vs_conn_tab __read_mostly;
 /*  SLAB cache for IPVS connections */
 static struct kmem_cache *ip_vs_conn_cachep __read_mostly;
 
-/*  counter for current IPVS connections */
-static atomic_t ip_vs_conn_count = ATOMIC_INIT(0);
-
 /*  counter for no client port connections */
 static atomic_t ip_vs_conn_no_cport_cnt = ATOMIC_INIT(0);
 
@@ -76,7 +73,7 @@ static unsigned int ip_vs_conn_rnd __read_mostly;
 /*
  *  Fine locking granularity for big connection hash table
  */
-#define CT_LOCKARRAY_BITS  4
+#define CT_LOCKARRAY_BITS  5
 #define CT_LOCKARRAY_SIZE  (1<<CT_LOCKARRAY_BITS)
 #define CT_LOCKARRAY_MASK  (CT_LOCKARRAY_SIZE-1)
 
@@ -133,19 +130,19 @@ static inline void ct_write_unlock_bh(unsigned key)
 /*
  *	Returns hash value for IPVS connection entry
  */
-static unsigned int ip_vs_conn_hashkey(int af, unsigned proto,
+static unsigned int ip_vs_conn_hashkey(struct net *net, int af, unsigned proto,
 				       const union nf_inet_addr *addr,
 				       __be16 port)
 {
 #ifdef CONFIG_IP_VS_IPV6
 	if (af == AF_INET6)
-		return jhash_3words(jhash(addr, 16, ip_vs_conn_rnd),
-				    (__force u32)port, proto, ip_vs_conn_rnd)
-			& ip_vs_conn_tab_mask;
+		return (jhash_3words(jhash(addr, 16, ip_vs_conn_rnd),
+				    (__force u32)port, proto, ip_vs_conn_rnd) ^
+			((size_t)net>>8)) & ip_vs_conn_tab_mask;
 #endif
-	return jhash_3words((__force u32)addr->ip, (__force u32)port, proto,
-			    ip_vs_conn_rnd)
-		& ip_vs_conn_tab_mask;
+	return (jhash_3words((__force u32)addr->ip, (__force u32)port, proto,
+			    ip_vs_conn_rnd) ^
+		((size_t)net>>8)) & ip_vs_conn_tab_mask;
 }
 
 static unsigned int ip_vs_conn_hashkey_param(const struct ip_vs_conn_param *p,
@@ -166,15 +163,15 @@ static unsigned int ip_vs_conn_hashkey_param(const struct ip_vs_conn_param *p,
 		port = p->vport;
 	}
 
-	return ip_vs_conn_hashkey(p->af, p->protocol, addr, port);
+	return ip_vs_conn_hashkey(p->net, p->af, p->protocol, addr, port);
 }
 
 static unsigned int ip_vs_conn_hashkey_conn(const struct ip_vs_conn *cp)
 {
 	struct ip_vs_conn_param p;
 
-	ip_vs_conn_fill_param(cp->af, cp->protocol, &cp->caddr, cp->cport,
-			      NULL, 0, &p);
+	ip_vs_conn_fill_param(ip_vs_conn_net(cp), cp->af, cp->protocol,
+			      &cp->caddr, cp->cport, NULL, 0, &p);
 
 	if (cp->pe) {
 		p.pe = cp->pe;
@@ -186,7 +183,7 @@ static unsigned int ip_vs_conn_hashkey_conn(const struct ip_vs_conn *cp)
 }
 
 /*
- *	Hashes ip_vs_conn in ip_vs_conn_tab by proto,addr,port.
+ *	Hashes ip_vs_conn in ip_vs_conn_tab by netns,proto,addr,port.
  *	returns bool success.
  */
 static inline int ip_vs_conn_hash(struct ip_vs_conn *cp)
@@ -269,11 +266,12 @@ __ip_vs_conn_in_get(const struct ip_vs_conn_param *p)
 
 	list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) {
 		if (cp->af == p->af &&
+		    p->cport == cp->cport && p->vport == cp->vport &&
 		    ip_vs_addr_equal(p->af, p->caddr, &cp->caddr) &&
 		    ip_vs_addr_equal(p->af, p->vaddr, &cp->vaddr) &&
-		    p->cport == cp->cport && p->vport == cp->vport &&
 		    ((!p->cport) ^ (!(cp->flags & IP_VS_CONN_F_NO_CPORT))) &&
-		    p->protocol == cp->protocol) {
+		    p->protocol == cp->protocol &&
+		    ip_vs_conn_net_eq(cp, p->net)) {
 			/* HIT */
 			atomic_inc(&cp->refcnt);
 			ct_read_unlock(hash);
@@ -313,23 +311,23 @@ ip_vs_conn_fill_param_proto(int af, const struct sk_buff *skb,
 			    struct ip_vs_conn_param *p)
 {
 	__be16 _ports[2], *pptr;
+	struct net *net = skb_net(skb);
 
 	pptr = skb_header_pointer(skb, proto_off, sizeof(_ports), _ports);
 	if (pptr == NULL)
 		return 1;
 
 	if (likely(!inverse))
-		ip_vs_conn_fill_param(af, iph->protocol, &iph->saddr, pptr[0],
-				      &iph->daddr, pptr[1], p);
+		ip_vs_conn_fill_param(net, af, iph->protocol, &iph->saddr,
+				      pptr[0], &iph->daddr, pptr[1], p);
 	else
-		ip_vs_conn_fill_param(af, iph->protocol, &iph->daddr, pptr[1],
-				      &iph->saddr, pptr[0], p);
+		ip_vs_conn_fill_param(net, af, iph->protocol, &iph->daddr,
+				      pptr[1], &iph->saddr, pptr[0], p);
 	return 0;
 }
 
 struct ip_vs_conn *
 ip_vs_conn_in_get_proto(int af, const struct sk_buff *skb,
-			struct ip_vs_protocol *pp,
 			const struct ip_vs_iphdr *iph,
 			unsigned int proto_off, int inverse)
 {
@@ -353,6 +351,8 @@ struct ip_vs_conn *ip_vs_ct_in_get(const struct ip_vs_conn_param *p)
 	ct_read_lock(hash);
 
 	list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) {
+		if (!ip_vs_conn_net_eq(cp, p->net))
+			continue;
 		if (p->pe_data && p->pe->ct_match) {
 			if (p->pe == cp->pe && p->pe->ct_match(p, cp))
 				goto out;
@@ -404,10 +404,11 @@ struct ip_vs_conn *ip_vs_conn_out_get(const struct ip_vs_conn_param *p)
 
 	list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) {
 		if (cp->af == p->af &&
+		    p->vport == cp->cport && p->cport == cp->dport &&
 		    ip_vs_addr_equal(p->af, p->vaddr, &cp->caddr) &&
 		    ip_vs_addr_equal(p->af, p->caddr, &cp->daddr) &&
-		    p->vport == cp->cport && p->cport == cp->dport &&
-		    p->protocol == cp->protocol) {
+		    p->protocol == cp->protocol &&
+		    ip_vs_conn_net_eq(cp, p->net)) {
 			/* HIT */
 			atomic_inc(&cp->refcnt);
 			ret = cp;
@@ -428,7 +429,6 @@ struct ip_vs_conn *ip_vs_conn_out_get(const struct ip_vs_conn_param *p)
 
 struct ip_vs_conn *
 ip_vs_conn_out_get_proto(int af, const struct sk_buff *skb,
-			 struct ip_vs_protocol *pp,
 			 const struct ip_vs_iphdr *iph,
 			 unsigned int proto_off, int inverse)
 {
@@ -611,8 +611,8 @@ struct ip_vs_dest *ip_vs_try_bind_dest(struct ip_vs_conn *cp)
 	struct ip_vs_dest *dest;
 
 	if ((cp) && (!cp->dest)) {
-		dest = ip_vs_find_dest(cp->af, &cp->daddr, cp->dport,
-				       &cp->vaddr, cp->vport,
+		dest = ip_vs_find_dest(ip_vs_conn_net(cp), cp->af, &cp->daddr,
+				       cp->dport, &cp->vaddr, cp->vport,
 				       cp->protocol, cp->fwmark);
 		ip_vs_bind_dest(cp, dest);
 		return dest;
@@ -686,13 +686,14 @@ static inline void ip_vs_unbind_dest(struct ip_vs_conn *cp)
 int ip_vs_check_template(struct ip_vs_conn *ct)
 {
 	struct ip_vs_dest *dest = ct->dest;
+	struct netns_ipvs *ipvs = net_ipvs(ip_vs_conn_net(ct));
 
 	/*
 	 * Checking the dest server status.
 	 */
 	if ((dest == NULL) ||
 	    !(dest->flags & IP_VS_DEST_F_AVAILABLE) ||
-	    (sysctl_ip_vs_expire_quiescent_template &&
+	    (ipvs->sysctl_expire_quiescent_template &&
 	     (atomic_read(&dest->weight) == 0))) {
 		IP_VS_DBG_BUF(9, "check_template: dest not available for "
 			      "protocol %s s:%s:%d v:%s:%d "
@@ -730,6 +731,7 @@ int ip_vs_check_template(struct ip_vs_conn *ct)
 static void ip_vs_conn_expire(unsigned long data)
 {
 	struct ip_vs_conn *cp = (struct ip_vs_conn *)data;
+	struct netns_ipvs *ipvs = net_ipvs(ip_vs_conn_net(cp));
 
 	cp->timeout = 60*HZ;
 
@@ -772,7 +774,7 @@ static void ip_vs_conn_expire(unsigned long data)
 		ip_vs_unbind_dest(cp);
 		if (cp->flags & IP_VS_CONN_F_NO_CPORT)
 			atomic_dec(&ip_vs_conn_no_cport_cnt);
-		atomic_dec(&ip_vs_conn_count);
+		atomic_dec(&ipvs->conn_count);
 
 		kmem_cache_free(ip_vs_conn_cachep, cp);
 		return;
@@ -806,7 +808,9 @@ ip_vs_conn_new(const struct ip_vs_conn_param *p,
 	       struct ip_vs_dest *dest, __u32 fwmark)
 {
 	struct ip_vs_conn *cp;
-	struct ip_vs_protocol *pp = ip_vs_proto_get(p->protocol);
+	struct netns_ipvs *ipvs = net_ipvs(p->net);
+	struct ip_vs_proto_data *pd = ip_vs_proto_data_get(p->net,
+							   p->protocol);
 
 	cp = kmem_cache_zalloc(ip_vs_conn_cachep, GFP_ATOMIC);
 	if (cp == NULL) {
@@ -816,6 +820,7 @@ ip_vs_conn_new(const struct ip_vs_conn_param *p,
 
 	INIT_LIST_HEAD(&cp->c_list);
 	setup_timer(&cp->timer, ip_vs_conn_expire, (unsigned long)cp);
+	ip_vs_conn_net_set(cp, p->net);
 	cp->af		   = p->af;
 	cp->protocol	   = p->protocol;
 	ip_vs_addr_copy(p->af, &cp->caddr, p->caddr);
@@ -846,7 +851,7 @@ ip_vs_conn_new(const struct ip_vs_conn_param *p,
 	atomic_set(&cp->n_control, 0);
 	atomic_set(&cp->in_pkts, 0);
 
-	atomic_inc(&ip_vs_conn_count);
+	atomic_inc(&ipvs->conn_count);
 	if (flags & IP_VS_CONN_F_NO_CPORT)
 		atomic_inc(&ip_vs_conn_no_cport_cnt);
 
@@ -865,8 +870,8 @@ ip_vs_conn_new(const struct ip_vs_conn_param *p,
 #endif
 		ip_vs_bind_xmit(cp);
 
-	if (unlikely(pp && atomic_read(&pp->appcnt)))
-		ip_vs_bind_app(cp, pp);
+	if (unlikely(pd && atomic_read(&pd->appcnt)))
+		ip_vs_bind_app(cp, pd->pp);
 
 	/*
 	 * Allow conntrack to be preserved. By default, conntrack
@@ -875,7 +880,7 @@ ip_vs_conn_new(const struct ip_vs_conn_param *p,
 	 * IP_VS_CONN_F_ONE_PACKET too.
 	 */
 
-	if (ip_vs_conntrack_enabled())
+	if (ip_vs_conntrack_enabled(ipvs))
 		cp->flags |= IP_VS_CONN_F_NFCT;
 
 	/* Hash it in the ip_vs_conn_tab finally */
@@ -888,17 +893,22 @@ ip_vs_conn_new(const struct ip_vs_conn_param *p,
  *	/proc/net/ip_vs_conn entries
  */
 #ifdef CONFIG_PROC_FS
+struct ip_vs_iter_state {
+	struct seq_net_private p;
+	struct list_head *l;
+};
 
 static void *ip_vs_conn_array(struct seq_file *seq, loff_t pos)
 {
 	int idx;
 	struct ip_vs_conn *cp;
+	struct ip_vs_iter_state *iter = seq->private;
 
 	for (idx = 0; idx < ip_vs_conn_tab_size; idx++) {
 		ct_read_lock_bh(idx);
 		list_for_each_entry(cp, &ip_vs_conn_tab[idx], c_list) {
 			if (pos-- == 0) {
-				seq->private = &ip_vs_conn_tab[idx];
+				iter->l = &ip_vs_conn_tab[idx];
 			return cp;
 			}
 		}
@@ -910,14 +920,17 @@ static void *ip_vs_conn_array(struct seq_file *seq, loff_t pos)
 
 static void *ip_vs_conn_seq_start(struct seq_file *seq, loff_t *pos)
 {
-	seq->private = NULL;
+	struct ip_vs_iter_state *iter = seq->private;
+
+	iter->l = NULL;
 	return *pos ? ip_vs_conn_array(seq, *pos - 1) :SEQ_START_TOKEN;
 }
 
 static void *ip_vs_conn_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
 	struct ip_vs_conn *cp = v;
-	struct list_head *e, *l = seq->private;
+	struct ip_vs_iter_state *iter = seq->private;
+	struct list_head *e, *l = iter->l;
 	int idx;
 
 	++*pos;
@@ -934,18 +947,19 @@ static void *ip_vs_conn_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	while (++idx < ip_vs_conn_tab_size) {
 		ct_read_lock_bh(idx);
 		list_for_each_entry(cp, &ip_vs_conn_tab[idx], c_list) {
-			seq->private = &ip_vs_conn_tab[idx];
+			iter->l = &ip_vs_conn_tab[idx];
 			return cp;
 		}
 		ct_read_unlock_bh(idx);
 	}
-	seq->private = NULL;
+	iter->l = NULL;
 	return NULL;
 }
 
 static void ip_vs_conn_seq_stop(struct seq_file *seq, void *v)
 {
-	struct list_head *l = seq->private;
+	struct ip_vs_iter_state *iter = seq->private;
+	struct list_head *l = iter->l;
 
 	if (l)
 		ct_read_unlock_bh(l - ip_vs_conn_tab);
@@ -959,9 +973,12 @@ static int ip_vs_conn_seq_show(struct seq_file *seq, void *v)
    "Pro FromIP   FPrt ToIP     TPrt DestIP   DPrt State       Expires PEName PEData\n");
 	else {
 		const struct ip_vs_conn *cp = v;
+		struct net *net = seq_file_net(seq);
 		char pe_data[IP_VS_PENAME_MAXLEN + IP_VS_PEDATA_MAXLEN + 3];
 		size_t len = 0;
 
+		if (!ip_vs_conn_net_eq(cp, net))
+			return 0;
 		if (cp->pe_data) {
 			pe_data[0] = ' ';
 			len = strlen(cp->pe->name);
@@ -1006,7 +1023,8 @@ static const struct seq_operations ip_vs_conn_seq_ops = {
 
 static int ip_vs_conn_open(struct inode *inode, struct file *file)
 {
-	return seq_open(file, &ip_vs_conn_seq_ops);
+	return seq_open_net(inode, file, &ip_vs_conn_seq_ops,
+			    sizeof(struct ip_vs_iter_state));
 }
 
 static const struct file_operations ip_vs_conn_fops = {
@@ -1033,6 +1051,10 @@ static int ip_vs_conn_sync_seq_show(struct seq_file *seq, void *v)
    "Pro FromIP   FPrt ToIP     TPrt DestIP   DPrt State       Origin Expires\n");
 	else {
 		const struct ip_vs_conn *cp = v;
+		struct net *net = seq_file_net(seq);
+
+		if (!ip_vs_conn_net_eq(cp, net))
+			return 0;
 
 #ifdef CONFIG_IP_VS_IPV6
 		if (cp->af == AF_INET6)
@@ -1069,7 +1091,8 @@ static const struct seq_operations ip_vs_conn_sync_seq_ops = {
 
 static int ip_vs_conn_sync_open(struct inode *inode, struct file *file)
 {
-	return seq_open(file, &ip_vs_conn_sync_seq_ops);
+	return seq_open_net(inode, file, &ip_vs_conn_sync_seq_ops,
+			    sizeof(struct ip_vs_iter_state));
 }
 
 static const struct file_operations ip_vs_conn_sync_fops = {
@@ -1115,7 +1138,7 @@ static inline int todrop_entry(struct ip_vs_conn *cp)
 }
 
 /* Called from keventd and must protect itself from softirqs */
-void ip_vs_random_dropentry(void)
+void ip_vs_random_dropentry(struct net *net)
 {
 	int idx;
 	struct ip_vs_conn *cp;
@@ -1135,7 +1158,8 @@ void ip_vs_random_dropentry(void)
 			if (cp->flags & IP_VS_CONN_F_TEMPLATE)
 				/* connection template */
 				continue;
-
+			if (!ip_vs_conn_net_eq(cp, net))
+				continue;
 			if (cp->protocol == IPPROTO_TCP) {
 				switch(cp->state) {
 				case IP_VS_TCP_S_SYN_RECV:
@@ -1170,12 +1194,13 @@ void ip_vs_random_dropentry(void)
 /*
  *      Flush all the connection entries in the ip_vs_conn_tab
  */
-static void ip_vs_conn_flush(void)
+static void ip_vs_conn_flush(struct net *net)
 {
 	int idx;
 	struct ip_vs_conn *cp;
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
-  flush_again:
+flush_again:
 	for (idx = 0; idx < ip_vs_conn_tab_size; idx++) {
 		/*
 		 *  Lock is actually needed in this loop.
@@ -1183,7 +1208,8 @@ static void ip_vs_conn_flush(void)
 		ct_write_lock_bh(idx);
 
 		list_for_each_entry(cp, &ip_vs_conn_tab[idx], c_list) {
-
+			if (!ip_vs_conn_net_eq(cp, net))
+				continue;
 			IP_VS_DBG(4, "del connection\n");
 			ip_vs_conn_expire_now(cp);
 			if (cp->control) {
@@ -1196,16 +1222,41 @@ static void ip_vs_conn_flush(void)
 
 	/* the counter may be not NULL, because maybe some conn entries
 	   are run by slow timer handler or unhashed but still referred */
-	if (atomic_read(&ip_vs_conn_count) != 0) {
+	if (atomic_read(&ipvs->conn_count) != 0) {
 		schedule();
 		goto flush_again;
 	}
 }
+/*
+ * per netns init and exit
+ */
+int __net_init __ip_vs_conn_init(struct net *net)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	atomic_set(&ipvs->conn_count, 0);
+
+	proc_net_fops_create(net, "ip_vs_conn", 0, &ip_vs_conn_fops);
+	proc_net_fops_create(net, "ip_vs_conn_sync", 0, &ip_vs_conn_sync_fops);
+	return 0;
+}
 
+static void __net_exit __ip_vs_conn_cleanup(struct net *net)
+{
+	/* flush all the connection entries first */
+	ip_vs_conn_flush(net);
+	proc_net_remove(net, "ip_vs_conn");
+	proc_net_remove(net, "ip_vs_conn_sync");
+}
+static struct pernet_operations ipvs_conn_ops = {
+	.init = __ip_vs_conn_init,
+	.exit = __ip_vs_conn_cleanup,
+};
 
 int __init ip_vs_conn_init(void)
 {
 	int idx;
+	int retc;
 
 	/* Compute size and mask */
 	ip_vs_conn_tab_size = 1 << ip_vs_conn_tab_bits;
@@ -1243,24 +1294,18 @@ int __init ip_vs_conn_init(void)
 		rwlock_init(&__ip_vs_conntbl_lock_array[idx].l);
 	}
 
-	proc_net_fops_create(&init_net, "ip_vs_conn", 0, &ip_vs_conn_fops);
-	proc_net_fops_create(&init_net, "ip_vs_conn_sync", 0, &ip_vs_conn_sync_fops);
+	retc = register_pernet_subsys(&ipvs_conn_ops);
 
 	/* calculate the random value for connection hash */
 	get_random_bytes(&ip_vs_conn_rnd, sizeof(ip_vs_conn_rnd));
 
-	return 0;
+	return retc;
 }
 
-
 void ip_vs_conn_cleanup(void)
 {
-	/* flush all the connection entries first */
-	ip_vs_conn_flush();
-
+	unregister_pernet_subsys(&ipvs_conn_ops);
 	/* Release the empty cache */
 	kmem_cache_destroy(ip_vs_conn_cachep);
-	proc_net_remove(&init_net, "ip_vs_conn");
-	proc_net_remove(&init_net, "ip_vs_conn_sync");
 	vfree(ip_vs_conn_tab);
 }
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index 5287771d064..f36a84f33ef 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -41,6 +41,7 @@
 #include <net/icmp.h>                   /* for icmp_send */
 #include <net/route.h>
 #include <net/ip6_checksum.h>
+#include <net/netns/generic.h>		/* net_generic() */
 
 #include <linux/netfilter.h>
 #include <linux/netfilter_ipv4.h>
@@ -68,6 +69,12 @@ EXPORT_SYMBOL(ip_vs_conn_put);
 EXPORT_SYMBOL(ip_vs_get_debug_level);
 #endif
 
+int ip_vs_net_id __read_mostly;
+#ifdef IP_VS_GENERIC_NETNS
+EXPORT_SYMBOL(ip_vs_net_id);
+#endif
+/* netns cnt used for uniqueness */
+static atomic_t ipvs_netns_cnt = ATOMIC_INIT(0);
 
 /* ID used in ICMP lookups */
 #define icmp_id(icmph)          (((icmph)->un).echo.id)
@@ -108,21 +115,28 @@ static inline void
 ip_vs_in_stats(struct ip_vs_conn *cp, struct sk_buff *skb)
 {
 	struct ip_vs_dest *dest = cp->dest;
+	struct netns_ipvs *ipvs = net_ipvs(skb_net(skb));
+
 	if (dest && (dest->flags & IP_VS_DEST_F_AVAILABLE)) {
-		spin_lock(&dest->stats.lock);
-		dest->stats.ustats.inpkts++;
-		dest->stats.ustats.inbytes += skb->len;
-		spin_unlock(&dest->stats.lock);
-
-		spin_lock(&dest->svc->stats.lock);
-		dest->svc->stats.ustats.inpkts++;
-		dest->svc->stats.ustats.inbytes += skb->len;
-		spin_unlock(&dest->svc->stats.lock);
-
-		spin_lock(&ip_vs_stats.lock);
-		ip_vs_stats.ustats.inpkts++;
-		ip_vs_stats.ustats.inbytes += skb->len;
-		spin_unlock(&ip_vs_stats.lock);
+		struct ip_vs_cpu_stats *s;
+
+		s = this_cpu_ptr(dest->stats.cpustats);
+		s->ustats.inpkts++;
+		u64_stats_update_begin(&s->syncp);
+		s->ustats.inbytes += skb->len;
+		u64_stats_update_end(&s->syncp);
+
+		s = this_cpu_ptr(dest->svc->stats.cpustats);
+		s->ustats.inpkts++;
+		u64_stats_update_begin(&s->syncp);
+		s->ustats.inbytes += skb->len;
+		u64_stats_update_end(&s->syncp);
+
+		s = this_cpu_ptr(ipvs->cpustats);
+		s->ustats.inpkts++;
+		u64_stats_update_begin(&s->syncp);
+		s->ustats.inbytes += skb->len;
+		u64_stats_update_end(&s->syncp);
 	}
 }
 
@@ -131,21 +145,28 @@ static inline void
 ip_vs_out_stats(struct ip_vs_conn *cp, struct sk_buff *skb)
 {
 	struct ip_vs_dest *dest = cp->dest;
+	struct netns_ipvs *ipvs = net_ipvs(skb_net(skb));
+
 	if (dest && (dest->flags & IP_VS_DEST_F_AVAILABLE)) {
-		spin_lock(&dest->stats.lock);
-		dest->stats.ustats.outpkts++;
-		dest->stats.ustats.outbytes += skb->len;
-		spin_unlock(&dest->stats.lock);
-
-		spin_lock(&dest->svc->stats.lock);
-		dest->svc->stats.ustats.outpkts++;
-		dest->svc->stats.ustats.outbytes += skb->len;
-		spin_unlock(&dest->svc->stats.lock);
-
-		spin_lock(&ip_vs_stats.lock);
-		ip_vs_stats.ustats.outpkts++;
-		ip_vs_stats.ustats.outbytes += skb->len;
-		spin_unlock(&ip_vs_stats.lock);
+		struct ip_vs_cpu_stats *s;
+
+		s = this_cpu_ptr(dest->stats.cpustats);
+		s->ustats.outpkts++;
+		u64_stats_update_begin(&s->syncp);
+		s->ustats.outbytes += skb->len;
+		u64_stats_update_end(&s->syncp);
+
+		s = this_cpu_ptr(dest->svc->stats.cpustats);
+		s->ustats.outpkts++;
+		u64_stats_update_begin(&s->syncp);
+		s->ustats.outbytes += skb->len;
+		u64_stats_update_end(&s->syncp);
+
+		s = this_cpu_ptr(ipvs->cpustats);
+		s->ustats.outpkts++;
+		u64_stats_update_begin(&s->syncp);
+		s->ustats.outbytes += skb->len;
+		u64_stats_update_end(&s->syncp);
 	}
 }
 
@@ -153,28 +174,28 @@ ip_vs_out_stats(struct ip_vs_conn *cp, struct sk_buff *skb)
 static inline void
 ip_vs_conn_stats(struct ip_vs_conn *cp, struct ip_vs_service *svc)
 {
-	spin_lock(&cp->dest->stats.lock);
-	cp->dest->stats.ustats.conns++;
-	spin_unlock(&cp->dest->stats.lock);
+	struct netns_ipvs *ipvs = net_ipvs(svc->net);
+	struct ip_vs_cpu_stats *s;
 
-	spin_lock(&svc->stats.lock);
-	svc->stats.ustats.conns++;
-	spin_unlock(&svc->stats.lock);
+	s = this_cpu_ptr(cp->dest->stats.cpustats);
+	s->ustats.conns++;
 
-	spin_lock(&ip_vs_stats.lock);
-	ip_vs_stats.ustats.conns++;
-	spin_unlock(&ip_vs_stats.lock);
+	s = this_cpu_ptr(svc->stats.cpustats);
+	s->ustats.conns++;
+
+	s = this_cpu_ptr(ipvs->cpustats);
+	s->ustats.conns++;
 }
 
 
 static inline int
 ip_vs_set_state(struct ip_vs_conn *cp, int direction,
 		const struct sk_buff *skb,
-		struct ip_vs_protocol *pp)
+		struct ip_vs_proto_data *pd)
 {
-	if (unlikely(!pp->state_transition))
+	if (unlikely(!pd->pp->state_transition))
 		return 0;
-	return pp->state_transition(cp, direction, skb, pp);
+	return pd->pp->state_transition(cp, direction, skb, pd);
 }
 
 static inline int
@@ -184,7 +205,8 @@ ip_vs_conn_fill_param_persist(const struct ip_vs_service *svc,
 			      const union nf_inet_addr *vaddr, __be16 vport,
 			      struct ip_vs_conn_param *p)
 {
-	ip_vs_conn_fill_param(svc->af, protocol, caddr, cport, vaddr, vport, p);
+	ip_vs_conn_fill_param(svc->net, svc->af, protocol, caddr, cport, vaddr,
+			      vport, p);
 	p->pe = svc->pe;
 	if (p->pe && p->pe->fill_param)
 		return p->pe->fill_param(p, skb);
@@ -327,8 +349,8 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
 	/*
 	 *    Create a new connection according to the template
 	 */
-	ip_vs_conn_fill_param(svc->af, iph.protocol, &iph.saddr, src_port,
-			      &iph.daddr, dst_port, &param);
+	ip_vs_conn_fill_param(svc->net, svc->af, iph.protocol, &iph.saddr,
+			      src_port, &iph.daddr, dst_port, &param);
 
 	cp = ip_vs_conn_new(&param, &dest->addr, dport, flags, dest, skb->mark);
 	if (cp == NULL) {
@@ -371,8 +393,9 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
  */
 struct ip_vs_conn *
 ip_vs_schedule(struct ip_vs_service *svc, struct sk_buff *skb,
-	       struct ip_vs_protocol *pp, int *ignored)
+	       struct ip_vs_proto_data *pd, int *ignored)
 {
+	struct ip_vs_protocol *pp = pd->pp;
 	struct ip_vs_conn *cp = NULL;
 	struct ip_vs_iphdr iph;
 	struct ip_vs_dest *dest;
@@ -401,7 +424,7 @@ ip_vs_schedule(struct ip_vs_service *svc, struct sk_buff *skb,
 	 *    Do not schedule replies from local real server.
 	 */
 	if ((!skb->dev || skb->dev->flags & IFF_LOOPBACK) &&
-	    (cp = pp->conn_in_get(svc->af, skb, pp, &iph, iph.len, 1))) {
+	    (cp = pp->conn_in_get(svc->af, skb, &iph, iph.len, 1))) {
 		IP_VS_DBG_PKT(12, svc->af, pp, skb, 0,
 			      "Not scheduling reply for existing connection");
 		__ip_vs_conn_put(cp);
@@ -442,8 +465,10 @@ ip_vs_schedule(struct ip_vs_service *svc, struct sk_buff *skb,
 	 */
 	{
 		struct ip_vs_conn_param p;
-		ip_vs_conn_fill_param(svc->af, iph.protocol, &iph.saddr,
-				      pptr[0], &iph.daddr, pptr[1], &p);
+
+		ip_vs_conn_fill_param(svc->net, svc->af, iph.protocol,
+				      &iph.saddr, pptr[0], &iph.daddr, pptr[1],
+				      &p);
 		cp = ip_vs_conn_new(&p, &dest->addr,
 				    dest->port ? dest->port : pptr[1],
 				    flags, dest, skb->mark);
@@ -472,11 +497,14 @@ ip_vs_schedule(struct ip_vs_service *svc, struct sk_buff *skb,
  *  no destination is available for a new connection.
  */
 int ip_vs_leave(struct ip_vs_service *svc, struct sk_buff *skb,
-		struct ip_vs_protocol *pp)
+		struct ip_vs_proto_data *pd)
 {
+	struct net *net;
+	struct netns_ipvs *ipvs;
 	__be16 _ports[2], *pptr;
 	struct ip_vs_iphdr iph;
 	int unicast;
+
 	ip_vs_fill_iphdr(svc->af, skb_network_header(skb), &iph);
 
 	pptr = skb_header_pointer(skb, iph.len, sizeof(_ports), _ports);
@@ -484,18 +512,20 @@ int ip_vs_leave(struct ip_vs_service *svc, struct sk_buff *skb,
 		ip_vs_service_put(svc);
 		return NF_DROP;
 	}
+	net = skb_net(skb);
 
 #ifdef CONFIG_IP_VS_IPV6
 	if (svc->af == AF_INET6)
 		unicast = ipv6_addr_type(&iph.daddr.in6) & IPV6_ADDR_UNICAST;
 	else
 #endif
-		unicast = (inet_addr_type(&init_net, iph.daddr.ip) == RTN_UNICAST);
+		unicast = (inet_addr_type(net, iph.daddr.ip) == RTN_UNICAST);
 
 	/* if it is fwmark-based service, the cache_bypass sysctl is up
 	   and the destination is a non-local unicast, then create
 	   a cache_bypass connection entry */
-	if (sysctl_ip_vs_cache_bypass && svc->fwmark && unicast) {
+	ipvs = net_ipvs(net);
+	if (ipvs->sysctl_cache_bypass && svc->fwmark && unicast) {
 		int ret, cs;
 		struct ip_vs_conn *cp;
 		unsigned int flags = (svc->flags & IP_VS_SVC_F_ONEPACKET &&
@@ -509,7 +539,7 @@ int ip_vs_leave(struct ip_vs_service *svc, struct sk_buff *skb,
 		IP_VS_DBG(6, "%s(): create a cache_bypass entry\n", __func__);
 		{
 			struct ip_vs_conn_param p;
-			ip_vs_conn_fill_param(svc->af, iph.protocol,
+			ip_vs_conn_fill_param(svc->net, svc->af, iph.protocol,
 					      &iph.saddr, pptr[0],
 					      &iph.daddr, pptr[1], &p);
 			cp = ip_vs_conn_new(&p, &daddr, 0,
@@ -523,10 +553,10 @@ int ip_vs_leave(struct ip_vs_service *svc, struct sk_buff *skb,
 		ip_vs_in_stats(cp, skb);
 
 		/* set state */
-		cs = ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pp);
+		cs = ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pd);
 
 		/* transmit the first SYN packet */
-		ret = cp->packet_xmit(skb, cp, pp);
+		ret = cp->packet_xmit(skb, cp, pd->pp);
 		/* do not touch skb anymore */
 
 		atomic_inc(&cp->in_pkts);
@@ -707,6 +737,7 @@ static int handle_response_icmp(int af, struct sk_buff *skb,
 				struct ip_vs_protocol *pp,
 				unsigned int offset, unsigned int ihl)
 {
+	struct netns_ipvs *ipvs;
 	unsigned int verdict = NF_DROP;
 
 	if (IP_VS_FWD_METHOD(cp) != 0) {
@@ -728,6 +759,8 @@ static int handle_response_icmp(int af, struct sk_buff *skb,
 	if (!skb_make_writable(skb, offset))
 		goto out;
 
+	ipvs = net_ipvs(skb_net(skb));
+
 #ifdef CONFIG_IP_VS_IPV6
 	if (af == AF_INET6)
 		ip_vs_nat_icmp_v6(skb, pp, cp, 1);
@@ -737,11 +770,11 @@ static int handle_response_icmp(int af, struct sk_buff *skb,
 
 #ifdef CONFIG_IP_VS_IPV6
 	if (af == AF_INET6) {
-		if (sysctl_ip_vs_snat_reroute && ip6_route_me_harder(skb) != 0)
+		if (ipvs->sysctl_snat_reroute && ip6_route_me_harder(skb) != 0)
 			goto out;
 	} else
 #endif
-		if ((sysctl_ip_vs_snat_reroute ||
+		if ((ipvs->sysctl_snat_reroute ||
 		     skb_rtable(skb)->rt_flags & RTCF_LOCAL) &&
 		    ip_route_me_harder(skb, RTN_LOCAL) != 0)
 			goto out;
@@ -833,7 +866,7 @@ static int ip_vs_out_icmp(struct sk_buff *skb, int *related,
 
 	ip_vs_fill_iphdr(AF_INET, cih, &ciph);
 	/* The embedded headers contain source and dest in reverse order */
-	cp = pp->conn_out_get(AF_INET, skb, pp, &ciph, offset, 1);
+	cp = pp->conn_out_get(AF_INET, skb, &ciph, offset, 1);
 	if (!cp)
 		return NF_ACCEPT;
 
@@ -910,7 +943,7 @@ static int ip_vs_out_icmp_v6(struct sk_buff *skb, int *related,
 
 	ip_vs_fill_iphdr(AF_INET6, cih, &ciph);
 	/* The embedded headers contain source and dest in reverse order */
-	cp = pp->conn_out_get(AF_INET6, skb, pp, &ciph, offset, 1);
+	cp = pp->conn_out_get(AF_INET6, skb, &ciph, offset, 1);
 	if (!cp)
 		return NF_ACCEPT;
 
@@ -949,9 +982,12 @@ static inline int is_tcp_reset(const struct sk_buff *skb, int nh_len)
  * Used for NAT and local client.
  */
 static unsigned int
-handle_response(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
+handle_response(int af, struct sk_buff *skb, struct ip_vs_proto_data *pd,
 		struct ip_vs_conn *cp, int ihl)
 {
+	struct ip_vs_protocol *pp = pd->pp;
+	struct netns_ipvs *ipvs;
+
 	IP_VS_DBG_PKT(11, af, pp, skb, 0, "Outgoing packet");
 
 	if (!skb_make_writable(skb, ihl))
@@ -986,13 +1022,15 @@ handle_response(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
 	 * if it came from this machine itself.  So re-compute
 	 * the routing information.
 	 */
+	ipvs = net_ipvs(skb_net(skb));
+
 #ifdef CONFIG_IP_VS_IPV6
 	if (af == AF_INET6) {
-		if (sysctl_ip_vs_snat_reroute && ip6_route_me_harder(skb) != 0)
+		if (ipvs->sysctl_snat_reroute && ip6_route_me_harder(skb) != 0)
 			goto drop;
 	} else
 #endif
-		if ((sysctl_ip_vs_snat_reroute ||
+		if ((ipvs->sysctl_snat_reroute ||
 		     skb_rtable(skb)->rt_flags & RTCF_LOCAL) &&
 		    ip_route_me_harder(skb, RTN_LOCAL) != 0)
 			goto drop;
@@ -1000,7 +1038,7 @@ handle_response(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
 	IP_VS_DBG_PKT(10, af, pp, skb, 0, "After SNAT");
 
 	ip_vs_out_stats(cp, skb);
-	ip_vs_set_state(cp, IP_VS_DIR_OUTPUT, skb, pp);
+	ip_vs_set_state(cp, IP_VS_DIR_OUTPUT, skb, pd);
 	skb->ipvs_property = 1;
 	if (!(cp->flags & IP_VS_CONN_F_NFCT))
 		ip_vs_notrack(skb);
@@ -1024,9 +1062,12 @@ drop:
 static unsigned int
 ip_vs_out(unsigned int hooknum, struct sk_buff *skb, int af)
 {
+	struct net *net = NULL;
 	struct ip_vs_iphdr iph;
 	struct ip_vs_protocol *pp;
+	struct ip_vs_proto_data *pd;
 	struct ip_vs_conn *cp;
+	struct netns_ipvs *ipvs;
 
 	EnterFunction(11);
 
@@ -1047,6 +1088,7 @@ ip_vs_out(unsigned int hooknum, struct sk_buff *skb, int af)
 	if (unlikely(!skb_dst(skb)))
 		return NF_ACCEPT;
 
+	net = skb_net(skb);
 	ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
 #ifdef CONFIG_IP_VS_IPV6
 	if (af == AF_INET6) {
@@ -1070,9 +1112,10 @@ ip_vs_out(unsigned int hooknum, struct sk_buff *skb, int af)
 			ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
 		}
 
-	pp = ip_vs_proto_get(iph.protocol);
-	if (unlikely(!pp))
+	pd = ip_vs_proto_data_get(net, iph.protocol);
+	if (unlikely(!pd))
 		return NF_ACCEPT;
+	pp = pd->pp;
 
 	/* reassemble IP fragments */
 #ifdef CONFIG_IP_VS_IPV6
@@ -1098,11 +1141,12 @@ ip_vs_out(unsigned int hooknum, struct sk_buff *skb, int af)
 	/*
 	 * Check if the packet belongs to an existing entry
 	 */
-	cp = pp->conn_out_get(af, skb, pp, &iph, iph.len, 0);
+	cp = pp->conn_out_get(af, skb, &iph, iph.len, 0);
+	ipvs = net_ipvs(net);
 
 	if (likely(cp))
-		return handle_response(af, skb, pp, cp, iph.len);
-	if (sysctl_ip_vs_nat_icmp_send &&
+		return handle_response(af, skb, pd, cp, iph.len);
+	if (ipvs->sysctl_nat_icmp_send &&
 	    (pp->protocol == IPPROTO_TCP ||
 	     pp->protocol == IPPROTO_UDP ||
 	     pp->protocol == IPPROTO_SCTP)) {
@@ -1112,7 +1156,7 @@ ip_vs_out(unsigned int hooknum, struct sk_buff *skb, int af)
 					  sizeof(_ports), _ports);
 		if (pptr == NULL)
 			return NF_ACCEPT;	/* Not for me */
-		if (ip_vs_lookup_real_service(af, iph.protocol,
+		if (ip_vs_lookup_real_service(net, af, iph.protocol,
 					      &iph.saddr,
 					      pptr[0])) {
 			/*
@@ -1227,12 +1271,14 @@ ip_vs_local_reply6(unsigned int hooknum, struct sk_buff *skb,
 static int
 ip_vs_in_icmp(struct sk_buff *skb, int *related, unsigned int hooknum)
 {
+	struct net *net = NULL;
 	struct iphdr *iph;
 	struct icmphdr	_icmph, *ic;
 	struct iphdr	_ciph, *cih;	/* The ip header contained within the ICMP */
 	struct ip_vs_iphdr ciph;
 	struct ip_vs_conn *cp;
 	struct ip_vs_protocol *pp;
+	struct ip_vs_proto_data *pd;
 	unsigned int offset, ihl, verdict;
 	union nf_inet_addr snet;
 
@@ -1274,9 +1320,11 @@ ip_vs_in_icmp(struct sk_buff *skb, int *related, unsigned int hooknum)
 	if (cih == NULL)
 		return NF_ACCEPT; /* The packet looks wrong, ignore */
 
-	pp = ip_vs_proto_get(cih->protocol);
-	if (!pp)
+	net = skb_net(skb);
+	pd = ip_vs_proto_data_get(net, cih->protocol);
+	if (!pd)
 		return NF_ACCEPT;
+	pp = pd->pp;
 
 	/* Is the embedded protocol header present? */
 	if (unlikely(cih->frag_off & htons(IP_OFFSET) &&
@@ -1290,10 +1338,10 @@ ip_vs_in_icmp(struct sk_buff *skb, int *related, unsigned int hooknum)
 
 	ip_vs_fill_iphdr(AF_INET, cih, &ciph);
 	/* The embedded headers contain source and dest in reverse order */
-	cp = pp->conn_in_get(AF_INET, skb, pp, &ciph, offset, 1);
+	cp = pp->conn_in_get(AF_INET, skb, &ciph, offset, 1);
 	if (!cp) {
 		/* The packet could also belong to a local client */
-		cp = pp->conn_out_get(AF_INET, skb, pp, &ciph, offset, 1);
+		cp = pp->conn_out_get(AF_INET, skb, &ciph, offset, 1);
 		if (cp) {
 			snet.ip = iph->saddr;
 			return handle_response_icmp(AF_INET, skb, &snet,
@@ -1337,6 +1385,7 @@ ip_vs_in_icmp(struct sk_buff *skb, int *related, unsigned int hooknum)
 static int
 ip_vs_in_icmp_v6(struct sk_buff *skb, int *related, unsigned int hooknum)
 {
+	struct net *net = NULL;
 	struct ipv6hdr *iph;
 	struct icmp6hdr	_icmph, *ic;
 	struct ipv6hdr	_ciph, *cih;	/* The ip header contained
@@ -1344,6 +1393,7 @@ ip_vs_in_icmp_v6(struct sk_buff *skb, int *related, unsigned int hooknum)
 	struct ip_vs_iphdr ciph;
 	struct ip_vs_conn *cp;
 	struct ip_vs_protocol *pp;
+	struct ip_vs_proto_data *pd;
 	unsigned int offset, verdict;
 	union nf_inet_addr snet;
 	struct rt6_info *rt;
@@ -1386,9 +1436,11 @@ ip_vs_in_icmp_v6(struct sk_buff *skb, int *related, unsigned int hooknum)
 	if (cih == NULL)
 		return NF_ACCEPT; /* The packet looks wrong, ignore */
 
-	pp = ip_vs_proto_get(cih->nexthdr);
-	if (!pp)
+	net = skb_net(skb);
+	pd = ip_vs_proto_data_get(net, cih->nexthdr);
+	if (!pd)
 		return NF_ACCEPT;
+	pp = pd->pp;
 
 	/* Is the embedded protocol header present? */
 	/* TODO: we don't support fragmentation at the moment anyways */
@@ -1402,10 +1454,10 @@ ip_vs_in_icmp_v6(struct sk_buff *skb, int *related, unsigned int hooknum)
 
 	ip_vs_fill_iphdr(AF_INET6, cih, &ciph);
 	/* The embedded headers contain source and dest in reverse order */
-	cp = pp->conn_in_get(AF_INET6, skb, pp, &ciph, offset, 1);
+	cp = pp->conn_in_get(AF_INET6, skb, &ciph, offset, 1);
 	if (!cp) {
 		/* The packet could also belong to a local client */
-		cp = pp->conn_out_get(AF_INET6, skb, pp, &ciph, offset, 1);
+		cp = pp->conn_out_get(AF_INET6, skb, &ciph, offset, 1);
 		if (cp) {
 			ipv6_addr_copy(&snet.in6, &iph->saddr);
 			return handle_response_icmp(AF_INET6, skb, &snet,
@@ -1448,10 +1500,13 @@ ip_vs_in_icmp_v6(struct sk_buff *skb, int *related, unsigned int hooknum)
 static unsigned int
 ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
 {
+	struct net *net;
 	struct ip_vs_iphdr iph;
 	struct ip_vs_protocol *pp;
+	struct ip_vs_proto_data *pd;
 	struct ip_vs_conn *cp;
 	int ret, restart, pkts;
+	struct netns_ipvs *ipvs;
 
 	/* Already marked as IPVS request or reply? */
 	if (skb->ipvs_property)
@@ -1505,20 +1560,21 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
 			ip_vs_fill_iphdr(af, skb_network_header(skb), &iph);
 		}
 
+	net = skb_net(skb);
 	/* Protocol supported? */
-	pp = ip_vs_proto_get(iph.protocol);
-	if (unlikely(!pp))
+	pd = ip_vs_proto_data_get(net, iph.protocol);
+	if (unlikely(!pd))
 		return NF_ACCEPT;
-
+	pp = pd->pp;
 	/*
 	 * Check if the packet belongs to an existing connection entry
 	 */
-	cp = pp->conn_in_get(af, skb, pp, &iph, iph.len, 0);
+	cp = pp->conn_in_get(af, skb, &iph, iph.len, 0);
 
 	if (unlikely(!cp)) {
 		int v;
 
-		if (!pp->conn_schedule(af, skb, pp, &v, &cp))
+		if (!pp->conn_schedule(af, skb, pd, &v, &cp))
 			return v;
 	}
 
@@ -1530,12 +1586,13 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
 	}
 
 	IP_VS_DBG_PKT(11, af, pp, skb, 0, "Incoming packet");
-
+	net = skb_net(skb);
+	ipvs = net_ipvs(net);
 	/* Check the server status */
 	if (cp->dest && !(cp->dest->flags & IP_VS_DEST_F_AVAILABLE)) {
 		/* the destination server is not available */
 
-		if (sysctl_ip_vs_expire_nodest_conn) {
+		if (ipvs->sysctl_expire_nodest_conn) {
 			/* try to expire the connection immediately */
 			ip_vs_conn_expire_now(cp);
 		}
@@ -1546,7 +1603,7 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
 	}
 
 	ip_vs_in_stats(cp, skb);
-	restart = ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pp);
+	restart = ip_vs_set_state(cp, IP_VS_DIR_INPUT, skb, pd);
 	if (cp->packet_xmit)
 		ret = cp->packet_xmit(skb, cp, pp);
 		/* do not touch skb anymore */
@@ -1563,37 +1620,38 @@ ip_vs_in(unsigned int hooknum, struct sk_buff *skb, int af)
 	 *
 	 * For ONE_PKT let ip_vs_sync_conn() do the filter work.
 	 */
+
 	if (cp->flags & IP_VS_CONN_F_ONE_PACKET)
-		pkts = sysctl_ip_vs_sync_threshold[0];
+		pkts = ipvs->sysctl_sync_threshold[0];
 	else
 		pkts = atomic_add_return(1, &cp->in_pkts);
 
-	if ((ip_vs_sync_state & IP_VS_STATE_MASTER) &&
+	if ((ipvs->sync_state & IP_VS_STATE_MASTER) &&
 	    cp->protocol == IPPROTO_SCTP) {
 		if ((cp->state == IP_VS_SCTP_S_ESTABLISHED &&
-			(pkts % sysctl_ip_vs_sync_threshold[1]
-			 == sysctl_ip_vs_sync_threshold[0])) ||
+			(pkts % ipvs->sysctl_sync_threshold[1]
+			 == ipvs->sysctl_sync_threshold[0])) ||
 				(cp->old_state != cp->state &&
 				 ((cp->state == IP_VS_SCTP_S_CLOSED) ||
 				  (cp->state == IP_VS_SCTP_S_SHUT_ACK_CLI) ||
 				  (cp->state == IP_VS_SCTP_S_SHUT_ACK_SER)))) {
-			ip_vs_sync_conn(cp);
+			ip_vs_sync_conn(net, cp);
 			goto out;
 		}
 	}
 
 	/* Keep this block last: TCP and others with pp->num_states <= 1 */
-	else if ((ip_vs_sync_state & IP_VS_STATE_MASTER) &&
+	else if ((ipvs->sync_state & IP_VS_STATE_MASTER) &&
 	    (((cp->protocol != IPPROTO_TCP ||
 	       cp->state == IP_VS_TCP_S_ESTABLISHED) &&
-	      (pkts % sysctl_ip_vs_sync_threshold[1]
-	       == sysctl_ip_vs_sync_threshold[0])) ||
+	      (pkts % ipvs->sysctl_sync_threshold[1]
+	       == ipvs->sysctl_sync_threshold[0])) ||
 	     ((cp->protocol == IPPROTO_TCP) && (cp->old_state != cp->state) &&
 	      ((cp->state == IP_VS_TCP_S_FIN_WAIT) ||
 	       (cp->state == IP_VS_TCP_S_CLOSE) ||
 	       (cp->state == IP_VS_TCP_S_CLOSE_WAIT) ||
 	       (cp->state == IP_VS_TCP_S_TIME_WAIT)))))
-		ip_vs_sync_conn(cp);
+		ip_vs_sync_conn(net, cp);
 out:
 	cp->old_state = cp->state;
 
@@ -1812,7 +1870,41 @@ static struct nf_hook_ops ip_vs_ops[] __read_mostly = {
 	},
 #endif
 };
+/*
+ *	Initialize IP Virtual Server netns mem.
+ */
+static int __net_init __ip_vs_init(struct net *net)
+{
+	struct netns_ipvs *ipvs;
+
+	ipvs = net_generic(net, ip_vs_net_id);
+	if (ipvs == NULL) {
+		pr_err("%s(): no memory.\n", __func__);
+		return -ENOMEM;
+	}
+	ipvs->net = net;
+	/* Counters used for creating unique names */
+	ipvs->gen = atomic_read(&ipvs_netns_cnt);
+	atomic_inc(&ipvs_netns_cnt);
+	net->ipvs = ipvs;
+	printk(KERN_INFO "IPVS: Creating netns size=%lu id=%d\n",
+			 sizeof(struct netns_ipvs), ipvs->gen);
+	return 0;
+}
+
+static void __net_exit __ip_vs_cleanup(struct net *net)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	IP_VS_DBG(10, "ipvs netns %d released\n", ipvs->gen);
+}
 
+static struct pernet_operations ipvs_core_ops = {
+	.init = __ip_vs_init,
+	.exit = __ip_vs_cleanup,
+	.id   = &ip_vs_net_id,
+	.size = sizeof(struct netns_ipvs),
+};
 
 /*
  *	Initialize IP Virtual Server
@@ -1821,8 +1913,11 @@ static int __init ip_vs_init(void)
 {
 	int ret;
 
-	ip_vs_estimator_init();
+	ret = register_pernet_subsys(&ipvs_core_ops);	/* Alloc ip_vs struct */
+	if (ret < 0)
+		return ret;
 
+	ip_vs_estimator_init();
 	ret = ip_vs_control_init();
 	if (ret < 0) {
 		pr_err("can't setup control.\n");
@@ -1843,15 +1938,23 @@ static int __init ip_vs_init(void)
 		goto cleanup_app;
 	}
 
+	ret = ip_vs_sync_init();
+	if (ret < 0) {
+		pr_err("can't setup sync data.\n");
+		goto cleanup_conn;
+	}
+
 	ret = nf_register_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
 	if (ret < 0) {
 		pr_err("can't register hooks.\n");
-		goto cleanup_conn;
+		goto cleanup_sync;
 	}
 
 	pr_info("ipvs loaded.\n");
 	return ret;
 
+cleanup_sync:
+	ip_vs_sync_cleanup();
   cleanup_conn:
 	ip_vs_conn_cleanup();
   cleanup_app:
@@ -1861,17 +1964,20 @@ static int __init ip_vs_init(void)
 	ip_vs_control_cleanup();
   cleanup_estimator:
 	ip_vs_estimator_cleanup();
+	unregister_pernet_subsys(&ipvs_core_ops);	/* free ip_vs struct */
 	return ret;
 }
 
 static void __exit ip_vs_cleanup(void)
 {
 	nf_unregister_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops));
+	ip_vs_sync_cleanup();
 	ip_vs_conn_cleanup();
 	ip_vs_app_cleanup();
 	ip_vs_protocol_cleanup();
 	ip_vs_control_cleanup();
 	ip_vs_estimator_cleanup();
+	unregister_pernet_subsys(&ipvs_core_ops);	/* free ip_vs struct */
 	pr_info("ipvs unloaded.\n");
 }
 
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index d12a13c497b..09ca2ce2f2b 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -38,6 +38,7 @@
 #include <linux/mutex.h>
 
 #include <net/net_namespace.h>
+#include <linux/nsproxy.h>
 #include <net/ip.h>
 #ifdef CONFIG_IP_VS_IPV6
 #include <net/ipv6.h>
@@ -57,42 +58,7 @@ static DEFINE_MUTEX(__ip_vs_mutex);
 /* lock for service table */
 static DEFINE_RWLOCK(__ip_vs_svc_lock);
 
-/* lock for table with the real services */
-static DEFINE_RWLOCK(__ip_vs_rs_lock);
-
-/* lock for state and timeout tables */
-static DEFINE_SPINLOCK(ip_vs_securetcp_lock);
-
-/* lock for drop entry handling */
-static DEFINE_SPINLOCK(__ip_vs_dropentry_lock);
-
-/* lock for drop packet handling */
-static DEFINE_SPINLOCK(__ip_vs_droppacket_lock);
-
-/* 1/rate drop and drop-entry variables */
-int ip_vs_drop_rate = 0;
-int ip_vs_drop_counter = 0;
-static atomic_t ip_vs_dropentry = ATOMIC_INIT(0);
-
-/* number of virtual services */
-static int ip_vs_num_services = 0;
-
 /* sysctl variables */
-static int sysctl_ip_vs_drop_entry = 0;
-static int sysctl_ip_vs_drop_packet = 0;
-static int sysctl_ip_vs_secure_tcp = 0;
-static int sysctl_ip_vs_amemthresh = 1024;
-static int sysctl_ip_vs_am_droprate = 10;
-int sysctl_ip_vs_cache_bypass = 0;
-int sysctl_ip_vs_expire_nodest_conn = 0;
-int sysctl_ip_vs_expire_quiescent_template = 0;
-int sysctl_ip_vs_sync_threshold[2] = { 3, 50 };
-int sysctl_ip_vs_nat_icmp_send = 0;
-#ifdef CONFIG_IP_VS_NFCT
-int sysctl_ip_vs_conntrack;
-#endif
-int sysctl_ip_vs_snat_reroute = 1;
-int sysctl_ip_vs_sync_ver = 1;		/* Default version of sync proto */
 
 #ifdef CONFIG_IP_VS_DEBUG
 static int sysctl_ip_vs_debug_level = 0;
@@ -105,18 +71,17 @@ int ip_vs_get_debug_level(void)
 
 #ifdef CONFIG_IP_VS_IPV6
 /* Taken from rt6_fill_node() in net/ipv6/route.c, is there a better way? */
-static int __ip_vs_addr_is_local_v6(const struct in6_addr *addr)
+static int __ip_vs_addr_is_local_v6(struct net *net,
+				    const struct in6_addr *addr)
 {
 	struct rt6_info *rt;
 	struct flowi fl = {
 		.oif = 0,
-		.nl_u = {
-			.ip6_u = {
-				.daddr = *addr,
-				.saddr = { .s6_addr32 = {0, 0, 0, 0} }, } },
+		.fl6_dst = *addr,
+		.fl6_src = { .s6_addr32 = {0, 0, 0, 0} },
 	};
 
-	rt = (struct rt6_info *)ip6_route_output(&init_net, NULL, &fl);
+	rt = (struct rt6_info *)ip6_route_output(net, NULL, &fl);
 	if (rt && rt->rt6i_dev && (rt->rt6i_dev->flags & IFF_LOOPBACK))
 			return 1;
 
@@ -127,7 +92,7 @@ static int __ip_vs_addr_is_local_v6(const struct in6_addr *addr)
  *	update_defense_level is called from keventd and from sysctl,
  *	so it needs to protect itself from softirqs
  */
-static void update_defense_level(void)
+static void update_defense_level(struct netns_ipvs *ipvs)
 {
 	struct sysinfo i;
 	static int old_secure_tcp = 0;
@@ -143,73 +108,73 @@ static void update_defense_level(void)
 	/* si_swapinfo(&i); */
 	/* availmem = availmem - (i.totalswap - i.freeswap); */
 
-	nomem = (availmem < sysctl_ip_vs_amemthresh);
+	nomem = (availmem < ipvs->sysctl_amemthresh);
 
 	local_bh_disable();
 
 	/* drop_entry */
-	spin_lock(&__ip_vs_dropentry_lock);
-	switch (sysctl_ip_vs_drop_entry) {
+	spin_lock(&ipvs->dropentry_lock);
+	switch (ipvs->sysctl_drop_entry) {
 	case 0:
-		atomic_set(&ip_vs_dropentry, 0);
+		atomic_set(&ipvs->dropentry, 0);
 		break;
 	case 1:
 		if (nomem) {
-			atomic_set(&ip_vs_dropentry, 1);
-			sysctl_ip_vs_drop_entry = 2;
+			atomic_set(&ipvs->dropentry, 1);
+			ipvs->sysctl_drop_entry = 2;
 		} else {
-			atomic_set(&ip_vs_dropentry, 0);
+			atomic_set(&ipvs->dropentry, 0);
 		}
 		break;
 	case 2:
 		if (nomem) {
-			atomic_set(&ip_vs_dropentry, 1);
+			atomic_set(&ipvs->dropentry, 1);
 		} else {
-			atomic_set(&ip_vs_dropentry, 0);
-			sysctl_ip_vs_drop_entry = 1;
+			atomic_set(&ipvs->dropentry, 0);
+			ipvs->sysctl_drop_entry = 1;
 		};
 		break;
 	case 3:
-		atomic_set(&ip_vs_dropentry, 1);
+		atomic_set(&ipvs->dropentry, 1);
 		break;
 	}
-	spin_unlock(&__ip_vs_dropentry_lock);
+	spin_unlock(&ipvs->dropentry_lock);
 
 	/* drop_packet */
-	spin_lock(&__ip_vs_droppacket_lock);
-	switch (sysctl_ip_vs_drop_packet) {
+	spin_lock(&ipvs->droppacket_lock);
+	switch (ipvs->sysctl_drop_packet) {
 	case 0:
-		ip_vs_drop_rate = 0;
+		ipvs->drop_rate = 0;
 		break;
 	case 1:
 		if (nomem) {
-			ip_vs_drop_rate = ip_vs_drop_counter
-				= sysctl_ip_vs_amemthresh /
-				(sysctl_ip_vs_amemthresh-availmem);
-			sysctl_ip_vs_drop_packet = 2;
+			ipvs->drop_rate = ipvs->drop_counter
+				= ipvs->sysctl_amemthresh /
+				(ipvs->sysctl_amemthresh-availmem);
+			ipvs->sysctl_drop_packet = 2;
 		} else {
-			ip_vs_drop_rate = 0;
+			ipvs->drop_rate = 0;
 		}
 		break;
 	case 2:
 		if (nomem) {
-			ip_vs_drop_rate = ip_vs_drop_counter
-				= sysctl_ip_vs_amemthresh /
-				(sysctl_ip_vs_amemthresh-availmem);
+			ipvs->drop_rate = ipvs->drop_counter
+				= ipvs->sysctl_amemthresh /
+				(ipvs->sysctl_amemthresh-availmem);
 		} else {
-			ip_vs_drop_rate = 0;
-			sysctl_ip_vs_drop_packet = 1;
+			ipvs->drop_rate = 0;
+			ipvs->sysctl_drop_packet = 1;
 		}
 		break;
 	case 3:
-		ip_vs_drop_rate = sysctl_ip_vs_am_droprate;
+		ipvs->drop_rate = ipvs->sysctl_am_droprate;
 		break;
 	}
-	spin_unlock(&__ip_vs_droppacket_lock);
+	spin_unlock(&ipvs->droppacket_lock);
 
 	/* secure_tcp */
-	spin_lock(&ip_vs_securetcp_lock);
-	switch (sysctl_ip_vs_secure_tcp) {
+	spin_lock(&ipvs->securetcp_lock);
+	switch (ipvs->sysctl_secure_tcp) {
 	case 0:
 		if (old_secure_tcp >= 2)
 			to_change = 0;
@@ -218,7 +183,7 @@ static void update_defense_level(void)
 		if (nomem) {
 			if (old_secure_tcp < 2)
 				to_change = 1;
-			sysctl_ip_vs_secure_tcp = 2;
+			ipvs->sysctl_secure_tcp = 2;
 		} else {
 			if (old_secure_tcp >= 2)
 				to_change = 0;
@@ -231,7 +196,7 @@ static void update_defense_level(void)
 		} else {
 			if (old_secure_tcp >= 2)
 				to_change = 0;
-			sysctl_ip_vs_secure_tcp = 1;
+			ipvs->sysctl_secure_tcp = 1;
 		}
 		break;
 	case 3:
@@ -239,10 +204,11 @@ static void update_defense_level(void)
 			to_change = 1;
 		break;
 	}
-	old_secure_tcp = sysctl_ip_vs_secure_tcp;
+	old_secure_tcp = ipvs->sysctl_secure_tcp;
 	if (to_change >= 0)
-		ip_vs_protocol_timeout_change(sysctl_ip_vs_secure_tcp>1);
-	spin_unlock(&ip_vs_securetcp_lock);
+		ip_vs_protocol_timeout_change(ipvs,
+					      ipvs->sysctl_secure_tcp > 1);
+	spin_unlock(&ipvs->securetcp_lock);
 
 	local_bh_enable();
 }
@@ -252,16 +218,16 @@ static void update_defense_level(void)
  *	Timer for checking the defense
  */
 #define DEFENSE_TIMER_PERIOD	1*HZ
-static void defense_work_handler(struct work_struct *work);
-static DECLARE_DELAYED_WORK(defense_work, defense_work_handler);
 
 static void defense_work_handler(struct work_struct *work)
 {
-	update_defense_level();
-	if (atomic_read(&ip_vs_dropentry))
-		ip_vs_random_dropentry();
+	struct netns_ipvs *ipvs =
+		container_of(work, struct netns_ipvs, defense_work.work);
 
-	schedule_delayed_work(&defense_work, DEFENSE_TIMER_PERIOD);
+	update_defense_level(ipvs);
+	if (atomic_read(&ipvs->dropentry))
+		ip_vs_random_dropentry(ipvs->net);
+	schedule_delayed_work(&ipvs->defense_work, DEFENSE_TIMER_PERIOD);
 }
 
 int
@@ -289,33 +255,13 @@ static struct list_head ip_vs_svc_table[IP_VS_SVC_TAB_SIZE];
 /* the service table hashed by fwmark */
 static struct list_head ip_vs_svc_fwm_table[IP_VS_SVC_TAB_SIZE];
 
-/*
- *	Hash table: for real service lookups
- */
-#define IP_VS_RTAB_BITS 4
-#define IP_VS_RTAB_SIZE (1 << IP_VS_RTAB_BITS)
-#define IP_VS_RTAB_MASK (IP_VS_RTAB_SIZE - 1)
-
-static struct list_head ip_vs_rtable[IP_VS_RTAB_SIZE];
-
-/*
- *	Trash for destinations
- */
-static LIST_HEAD(ip_vs_dest_trash);
-
-/*
- *	FTP & NULL virtual service counters
- */
-static atomic_t ip_vs_ftpsvc_counter = ATOMIC_INIT(0);
-static atomic_t ip_vs_nullsvc_counter = ATOMIC_INIT(0);
-
 
 /*
  *	Returns hash value for virtual service
  */
-static __inline__ unsigned
-ip_vs_svc_hashkey(int af, unsigned proto, const union nf_inet_addr *addr,
-		  __be16 port)
+static inline unsigned
+ip_vs_svc_hashkey(struct net *net, int af, unsigned proto,
+		  const union nf_inet_addr *addr, __be16 port)
 {
 	register unsigned porth = ntohs(port);
 	__be32 addr_fold = addr->ip;
@@ -325,6 +271,7 @@ ip_vs_svc_hashkey(int af, unsigned proto, const union nf_inet_addr *addr,
 		addr_fold = addr->ip6[0]^addr->ip6[1]^
 			    addr->ip6[2]^addr->ip6[3];
 #endif
+	addr_fold ^= ((size_t)net>>8);
 
 	return (proto^ntohl(addr_fold)^(porth>>IP_VS_SVC_TAB_BITS)^porth)
 		& IP_VS_SVC_TAB_MASK;
@@ -333,13 +280,13 @@ ip_vs_svc_hashkey(int af, unsigned proto, const union nf_inet_addr *addr,
 /*
  *	Returns hash value of fwmark for virtual service lookup
  */
-static __inline__ unsigned ip_vs_svc_fwm_hashkey(__u32 fwmark)
+static inline unsigned ip_vs_svc_fwm_hashkey(struct net *net, __u32 fwmark)
 {
-	return fwmark & IP_VS_SVC_TAB_MASK;
+	return (((size_t)net>>8) ^ fwmark) & IP_VS_SVC_TAB_MASK;
 }
 
 /*
- *	Hashes a service in the ip_vs_svc_table by <proto,addr,port>
+ *	Hashes a service in the ip_vs_svc_table by <netns,proto,addr,port>
  *	or in the ip_vs_svc_fwm_table by fwmark.
  *	Should be called with locked tables.
  */
@@ -355,16 +302,16 @@ static int ip_vs_svc_hash(struct ip_vs_service *svc)
 
 	if (svc->fwmark == 0) {
 		/*
-		 *  Hash it by <protocol,addr,port> in ip_vs_svc_table
+		 *  Hash it by <netns,protocol,addr,port> in ip_vs_svc_table
 		 */
-		hash = ip_vs_svc_hashkey(svc->af, svc->protocol, &svc->addr,
-					 svc->port);
+		hash = ip_vs_svc_hashkey(svc->net, svc->af, svc->protocol,
+					 &svc->addr, svc->port);
 		list_add(&svc->s_list, &ip_vs_svc_table[hash]);
 	} else {
 		/*
-		 *  Hash it by fwmark in ip_vs_svc_fwm_table
+		 *  Hash it by fwmark in svc_fwm_table
 		 */
-		hash = ip_vs_svc_fwm_hashkey(svc->fwmark);
+		hash = ip_vs_svc_fwm_hashkey(svc->net, svc->fwmark);
 		list_add(&svc->f_list, &ip_vs_svc_fwm_table[hash]);
 	}
 
@@ -376,7 +323,7 @@ static int ip_vs_svc_hash(struct ip_vs_service *svc)
 
 
 /*
- *	Unhashes a service from ip_vs_svc_table/ip_vs_svc_fwm_table.
+ *	Unhashes a service from svc_table / svc_fwm_table.
  *	Should be called with locked tables.
  */
 static int ip_vs_svc_unhash(struct ip_vs_service *svc)
@@ -388,10 +335,10 @@ static int ip_vs_svc_unhash(struct ip_vs_service *svc)
 	}
 
 	if (svc->fwmark == 0) {
-		/* Remove it from the ip_vs_svc_table table */
+		/* Remove it from the svc_table table */
 		list_del(&svc->s_list);
 	} else {
-		/* Remove it from the ip_vs_svc_fwm_table table */
+		/* Remove it from the svc_fwm_table table */
 		list_del(&svc->f_list);
 	}
 
@@ -402,23 +349,24 @@ static int ip_vs_svc_unhash(struct ip_vs_service *svc)
 
 
 /*
- *	Get service by {proto,addr,port} in the service table.
+ *	Get service by {netns, proto,addr,port} in the service table.
  */
 static inline struct ip_vs_service *
-__ip_vs_service_find(int af, __u16 protocol, const union nf_inet_addr *vaddr,
-		    __be16 vport)
+__ip_vs_service_find(struct net *net, int af, __u16 protocol,
+		     const union nf_inet_addr *vaddr, __be16 vport)
 {
 	unsigned hash;
 	struct ip_vs_service *svc;
 
 	/* Check for "full" addressed entries */
-	hash = ip_vs_svc_hashkey(af, protocol, vaddr, vport);
+	hash = ip_vs_svc_hashkey(net, af, protocol, vaddr, vport);
 
 	list_for_each_entry(svc, &ip_vs_svc_table[hash], s_list){
 		if ((svc->af == af)
 		    && ip_vs_addr_equal(af, &svc->addr, vaddr)
 		    && (svc->port == vport)
-		    && (svc->protocol == protocol)) {
+		    && (svc->protocol == protocol)
+		    && net_eq(svc->net, net)) {
 			/* HIT */
 			return svc;
 		}
@@ -432,16 +380,17 @@ __ip_vs_service_find(int af, __u16 protocol, const union nf_inet_addr *vaddr,
  *	Get service by {fwmark} in the service table.
  */
 static inline struct ip_vs_service *
-__ip_vs_svc_fwm_find(int af, __u32 fwmark)
+__ip_vs_svc_fwm_find(struct net *net, int af, __u32 fwmark)
 {
 	unsigned hash;
 	struct ip_vs_service *svc;
 
 	/* Check for fwmark addressed entries */
-	hash = ip_vs_svc_fwm_hashkey(fwmark);
+	hash = ip_vs_svc_fwm_hashkey(net, fwmark);
 
 	list_for_each_entry(svc, &ip_vs_svc_fwm_table[hash], f_list) {
-		if (svc->fwmark == fwmark && svc->af == af) {
+		if (svc->fwmark == fwmark && svc->af == af
+		    && net_eq(svc->net, net)) {
 			/* HIT */
 			return svc;
 		}
@@ -451,42 +400,44 @@ __ip_vs_svc_fwm_find(int af, __u32 fwmark)
 }
 
 struct ip_vs_service *
-ip_vs_service_get(int af, __u32 fwmark, __u16 protocol,
+ip_vs_service_get(struct net *net, int af, __u32 fwmark, __u16 protocol,
 		  const union nf_inet_addr *vaddr, __be16 vport)
 {
 	struct ip_vs_service *svc;
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
 	read_lock(&__ip_vs_svc_lock);
 
 	/*
 	 *	Check the table hashed by fwmark first
 	 */
-	if (fwmark && (svc = __ip_vs_svc_fwm_find(af, fwmark)))
+	svc = __ip_vs_svc_fwm_find(net, af, fwmark);
+	if (fwmark && svc)
 		goto out;
 
 	/*
 	 *	Check the table hashed by <protocol,addr,port>
 	 *	for "full" addressed entries
 	 */
-	svc = __ip_vs_service_find(af, protocol, vaddr, vport);
+	svc = __ip_vs_service_find(net, af, protocol, vaddr, vport);
 
 	if (svc == NULL
 	    && protocol == IPPROTO_TCP
-	    && atomic_read(&ip_vs_ftpsvc_counter)
+	    && atomic_read(&ipvs->ftpsvc_counter)
 	    && (vport == FTPDATA || ntohs(vport) >= PROT_SOCK)) {
 		/*
 		 * Check if ftp service entry exists, the packet
 		 * might belong to FTP data connections.
 		 */
-		svc = __ip_vs_service_find(af, protocol, vaddr, FTPPORT);
+		svc = __ip_vs_service_find(net, af, protocol, vaddr, FTPPORT);
 	}
 
 	if (svc == NULL
-	    && atomic_read(&ip_vs_nullsvc_counter)) {
+	    && atomic_read(&ipvs->nullsvc_counter)) {
 		/*
 		 * Check if the catch-all port (port zero) exists
 		 */
-		svc = __ip_vs_service_find(af, protocol, vaddr, 0);
+		svc = __ip_vs_service_find(net, af, protocol, vaddr, 0);
 	}
 
   out:
@@ -521,6 +472,7 @@ __ip_vs_unbind_svc(struct ip_vs_dest *dest)
 			      svc->fwmark,
 			      IP_VS_DBG_ADDR(svc->af, &svc->addr),
 			      ntohs(svc->port), atomic_read(&svc->usecnt));
+		free_percpu(svc->stats.cpustats);
 		kfree(svc);
 	}
 }
@@ -547,10 +499,10 @@ static inline unsigned ip_vs_rs_hashkey(int af,
 }
 
 /*
- *	Hashes ip_vs_dest in ip_vs_rtable by <proto,addr,port>.
+ *	Hashes ip_vs_dest in rs_table by <proto,addr,port>.
  *	should be called with locked tables.
  */
-static int ip_vs_rs_hash(struct ip_vs_dest *dest)
+static int ip_vs_rs_hash(struct netns_ipvs *ipvs, struct ip_vs_dest *dest)
 {
 	unsigned hash;
 
@@ -564,19 +516,19 @@ static int ip_vs_rs_hash(struct ip_vs_dest *dest)
 	 */
 	hash = ip_vs_rs_hashkey(dest->af, &dest->addr, dest->port);
 
-	list_add(&dest->d_list, &ip_vs_rtable[hash]);
+	list_add(&dest->d_list, &ipvs->rs_table[hash]);
 
 	return 1;
 }
 
 /*
- *	UNhashes ip_vs_dest from ip_vs_rtable.
+ *	UNhashes ip_vs_dest from rs_table.
  *	should be called with locked tables.
  */
 static int ip_vs_rs_unhash(struct ip_vs_dest *dest)
 {
 	/*
-	 * Remove it from the ip_vs_rtable table.
+	 * Remove it from the rs_table table.
 	 */
 	if (!list_empty(&dest->d_list)) {
 		list_del(&dest->d_list);
@@ -590,10 +542,11 @@ static int ip_vs_rs_unhash(struct ip_vs_dest *dest)
  *	Lookup real service by <proto,addr,port> in the real service table.
  */
 struct ip_vs_dest *
-ip_vs_lookup_real_service(int af, __u16 protocol,
+ip_vs_lookup_real_service(struct net *net, int af, __u16 protocol,
 			  const union nf_inet_addr *daddr,
 			  __be16 dport)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	unsigned hash;
 	struct ip_vs_dest *dest;
 
@@ -603,19 +556,19 @@ ip_vs_lookup_real_service(int af, __u16 protocol,
 	 */
 	hash = ip_vs_rs_hashkey(af, daddr, dport);
 
-	read_lock(&__ip_vs_rs_lock);
-	list_for_each_entry(dest, &ip_vs_rtable[hash], d_list) {
+	read_lock(&ipvs->rs_lock);
+	list_for_each_entry(dest, &ipvs->rs_table[hash], d_list) {
 		if ((dest->af == af)
 		    && ip_vs_addr_equal(af, &dest->addr, daddr)
 		    && (dest->port == dport)
 		    && ((dest->protocol == protocol) ||
 			dest->vfwmark)) {
 			/* HIT */
-			read_unlock(&__ip_vs_rs_lock);
+			read_unlock(&ipvs->rs_lock);
 			return dest;
 		}
 	}
-	read_unlock(&__ip_vs_rs_lock);
+	read_unlock(&ipvs->rs_lock);
 
 	return NULL;
 }
@@ -654,7 +607,8 @@ ip_vs_lookup_dest(struct ip_vs_service *svc, const union nf_inet_addr *daddr,
  * ip_vs_lookup_real_service() looked promissing, but
  * seems not working as expected.
  */
-struct ip_vs_dest *ip_vs_find_dest(int af, const union nf_inet_addr *daddr,
+struct ip_vs_dest *ip_vs_find_dest(struct net  *net, int af,
+				   const union nf_inet_addr *daddr,
 				   __be16 dport,
 				   const union nf_inet_addr *vaddr,
 				   __be16 vport, __u16 protocol, __u32 fwmark)
@@ -662,7 +616,7 @@ struct ip_vs_dest *ip_vs_find_dest(int af, const union nf_inet_addr *daddr,
 	struct ip_vs_dest *dest;
 	struct ip_vs_service *svc;
 
-	svc = ip_vs_service_get(af, fwmark, protocol, vaddr, vport);
+	svc = ip_vs_service_get(net, af, fwmark, protocol, vaddr, vport);
 	if (!svc)
 		return NULL;
 	dest = ip_vs_lookup_dest(svc, daddr, dport);
@@ -687,11 +641,12 @@ ip_vs_trash_get_dest(struct ip_vs_service *svc, const union nf_inet_addr *daddr,
 		     __be16 dport)
 {
 	struct ip_vs_dest *dest, *nxt;
+	struct netns_ipvs *ipvs = net_ipvs(svc->net);
 
 	/*
 	 * Find the destination in trash
 	 */
-	list_for_each_entry_safe(dest, nxt, &ip_vs_dest_trash, n_list) {
+	list_for_each_entry_safe(dest, nxt, &ipvs->dest_trash, n_list) {
 		IP_VS_DBG_BUF(3, "Destination %u/%s:%u still in trash, "
 			      "dest->refcnt=%d\n",
 			      dest->vfwmark,
@@ -722,6 +677,7 @@ ip_vs_trash_get_dest(struct ip_vs_service *svc, const union nf_inet_addr *daddr,
 			list_del(&dest->n_list);
 			ip_vs_dst_reset(dest);
 			__ip_vs_unbind_svc(dest);
+			free_percpu(dest->stats.cpustats);
 			kfree(dest);
 		}
 	}
@@ -739,14 +695,16 @@ ip_vs_trash_get_dest(struct ip_vs_service *svc, const union nf_inet_addr *daddr,
  *  are expired, and the refcnt of each destination in the trash must
  *  be 1, so we simply release them here.
  */
-static void ip_vs_trash_cleanup(void)
+static void ip_vs_trash_cleanup(struct net *net)
 {
 	struct ip_vs_dest *dest, *nxt;
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
-	list_for_each_entry_safe(dest, nxt, &ip_vs_dest_trash, n_list) {
+	list_for_each_entry_safe(dest, nxt, &ipvs->dest_trash, n_list) {
 		list_del(&dest->n_list);
 		ip_vs_dst_reset(dest);
 		__ip_vs_unbind_svc(dest);
+		free_percpu(dest->stats.cpustats);
 		kfree(dest);
 	}
 }
@@ -770,6 +728,7 @@ static void
 __ip_vs_update_dest(struct ip_vs_service *svc, struct ip_vs_dest *dest,
 		    struct ip_vs_dest_user_kern *udest, int add)
 {
+	struct netns_ipvs *ipvs = net_ipvs(svc->net);
 	int conn_flags;
 
 	/* set the weight and the flags */
@@ -782,12 +741,12 @@ __ip_vs_update_dest(struct ip_vs_service *svc, struct ip_vs_dest *dest,
 		conn_flags |= IP_VS_CONN_F_NOOUTPUT;
 	} else {
 		/*
-		 *    Put the real service in ip_vs_rtable if not present.
+		 *    Put the real service in rs_table if not present.
 		 *    For now only for NAT!
 		 */
-		write_lock_bh(&__ip_vs_rs_lock);
-		ip_vs_rs_hash(dest);
-		write_unlock_bh(&__ip_vs_rs_lock);
+		write_lock_bh(&ipvs->rs_lock);
+		ip_vs_rs_hash(ipvs, dest);
+		write_unlock_bh(&ipvs->rs_lock);
 	}
 	atomic_set(&dest->conn_flags, conn_flags);
 
@@ -815,7 +774,7 @@ __ip_vs_update_dest(struct ip_vs_service *svc, struct ip_vs_dest *dest,
 	spin_unlock(&dest->dst_lock);
 
 	if (add)
-		ip_vs_new_estimator(&dest->stats);
+		ip_vs_new_estimator(svc->net, &dest->stats);
 
 	write_lock_bh(&__ip_vs_svc_lock);
 
@@ -852,12 +811,12 @@ ip_vs_new_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest,
 		atype = ipv6_addr_type(&udest->addr.in6);
 		if ((!(atype & IPV6_ADDR_UNICAST) ||
 			atype & IPV6_ADDR_LINKLOCAL) &&
-			!__ip_vs_addr_is_local_v6(&udest->addr.in6))
+			!__ip_vs_addr_is_local_v6(svc->net, &udest->addr.in6))
 			return -EINVAL;
 	} else
 #endif
 	{
-		atype = inet_addr_type(&init_net, udest->addr.ip);
+		atype = inet_addr_type(svc->net, udest->addr.ip);
 		if (atype != RTN_LOCAL && atype != RTN_UNICAST)
 			return -EINVAL;
 	}
@@ -867,6 +826,11 @@ ip_vs_new_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest,
 		pr_err("%s(): no memory.\n", __func__);
 		return -ENOMEM;
 	}
+	dest->stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats);
+	if (!dest->stats.cpustats) {
+		pr_err("%s() alloc_percpu failed\n", __func__);
+		goto err_alloc;
+	}
 
 	dest->af = svc->af;
 	dest->protocol = svc->protocol;
@@ -890,6 +854,10 @@ ip_vs_new_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest,
 
 	LeaveFunction(2);
 	return 0;
+
+err_alloc:
+	kfree(dest);
+	return -ENOMEM;
 }
 
 
@@ -1008,16 +976,18 @@ ip_vs_edit_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest)
 /*
  *	Delete a destination (must be already unlinked from the service)
  */
-static void __ip_vs_del_dest(struct ip_vs_dest *dest)
+static void __ip_vs_del_dest(struct net *net, struct ip_vs_dest *dest)
 {
-	ip_vs_kill_estimator(&dest->stats);
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	ip_vs_kill_estimator(net, &dest->stats);
 
 	/*
 	 *  Remove it from the d-linked list with the real services.
 	 */
-	write_lock_bh(&__ip_vs_rs_lock);
+	write_lock_bh(&ipvs->rs_lock);
 	ip_vs_rs_unhash(dest);
-	write_unlock_bh(&__ip_vs_rs_lock);
+	write_unlock_bh(&ipvs->rs_lock);
 
 	/*
 	 *  Decrease the refcnt of the dest, and free the dest
@@ -1036,6 +1006,7 @@ static void __ip_vs_del_dest(struct ip_vs_dest *dest)
 		   and only one user context can update virtual service at a
 		   time, so the operation here is OK */
 		atomic_dec(&dest->svc->refcnt);
+		free_percpu(dest->stats.cpustats);
 		kfree(dest);
 	} else {
 		IP_VS_DBG_BUF(3, "Moving dest %s:%u into trash, "
@@ -1043,7 +1014,7 @@ static void __ip_vs_del_dest(struct ip_vs_dest *dest)
 			      IP_VS_DBG_ADDR(dest->af, &dest->addr),
 			      ntohs(dest->port),
 			      atomic_read(&dest->refcnt));
-		list_add(&dest->n_list, &ip_vs_dest_trash);
+		list_add(&dest->n_list, &ipvs->dest_trash);
 		atomic_inc(&dest->refcnt);
 	}
 }
@@ -1107,7 +1078,7 @@ ip_vs_del_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest)
 	/*
 	 *	Delete the destination
 	 */
-	__ip_vs_del_dest(dest);
+	__ip_vs_del_dest(svc->net, dest);
 
 	LeaveFunction(2);
 
@@ -1119,13 +1090,14 @@ ip_vs_del_dest(struct ip_vs_service *svc, struct ip_vs_dest_user_kern *udest)
  *	Add a service into the service hash table
  */
 static int
-ip_vs_add_service(struct ip_vs_service_user_kern *u,
+ip_vs_add_service(struct net *net, struct ip_vs_service_user_kern *u,
 		  struct ip_vs_service **svc_p)
 {
 	int ret = 0;
 	struct ip_vs_scheduler *sched = NULL;
 	struct ip_vs_pe *pe = NULL;
 	struct ip_vs_service *svc = NULL;
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
 	/* increase the module use count */
 	ip_vs_use_count_inc();
@@ -1161,6 +1133,11 @@ ip_vs_add_service(struct ip_vs_service_user_kern *u,
 		ret = -ENOMEM;
 		goto out_err;
 	}
+	svc->stats.cpustats = alloc_percpu(struct ip_vs_cpu_stats);
+	if (!svc->stats.cpustats) {
+		pr_err("%s() alloc_percpu failed\n", __func__);
+		goto out_err;
+	}
 
 	/* I'm the first user of the service */
 	atomic_set(&svc->usecnt, 0);
@@ -1174,6 +1151,7 @@ ip_vs_add_service(struct ip_vs_service_user_kern *u,
 	svc->flags = u->flags;
 	svc->timeout = u->timeout * HZ;
 	svc->netmask = u->netmask;
+	svc->net = net;
 
 	INIT_LIST_HEAD(&svc->destinations);
 	rwlock_init(&svc->sched_lock);
@@ -1191,15 +1169,15 @@ ip_vs_add_service(struct ip_vs_service_user_kern *u,
 
 	/* Update the virtual service counters */
 	if (svc->port == FTPPORT)
-		atomic_inc(&ip_vs_ftpsvc_counter);
+		atomic_inc(&ipvs->ftpsvc_counter);
 	else if (svc->port == 0)
-		atomic_inc(&ip_vs_nullsvc_counter);
+		atomic_inc(&ipvs->nullsvc_counter);
 
-	ip_vs_new_estimator(&svc->stats);
+	ip_vs_new_estimator(net, &svc->stats);
 
 	/* Count only IPv4 services for old get/setsockopt interface */
 	if (svc->af == AF_INET)
-		ip_vs_num_services++;
+		ipvs->num_services++;
 
 	/* Hash the service into the service table */
 	write_lock_bh(&__ip_vs_svc_lock);
@@ -1209,6 +1187,7 @@ ip_vs_add_service(struct ip_vs_service_user_kern *u,
 	*svc_p = svc;
 	return 0;
 
+
  out_err:
 	if (svc != NULL) {
 		ip_vs_unbind_scheduler(svc);
@@ -1217,6 +1196,8 @@ ip_vs_add_service(struct ip_vs_service_user_kern *u,
 			ip_vs_app_inc_put(svc->inc);
 			local_bh_enable();
 		}
+		if (svc->stats.cpustats)
+			free_percpu(svc->stats.cpustats);
 		kfree(svc);
 	}
 	ip_vs_scheduler_put(sched);
@@ -1336,14 +1317,15 @@ static void __ip_vs_del_service(struct ip_vs_service *svc)
 	struct ip_vs_dest *dest, *nxt;
 	struct ip_vs_scheduler *old_sched;
 	struct ip_vs_pe *old_pe;
+	struct netns_ipvs *ipvs = net_ipvs(svc->net);
 
 	pr_info("%s: enter\n", __func__);
 
 	/* Count only IPv4 services for old get/setsockopt interface */
 	if (svc->af == AF_INET)
-		ip_vs_num_services--;
+		ipvs->num_services--;
 
-	ip_vs_kill_estimator(&svc->stats);
+	ip_vs_kill_estimator(svc->net, &svc->stats);
 
 	/* Unbind scheduler */
 	old_sched = svc->scheduler;
@@ -1366,16 +1348,16 @@ static void __ip_vs_del_service(struct ip_vs_service *svc)
 	 */
 	list_for_each_entry_safe(dest, nxt, &svc->destinations, n_list) {
 		__ip_vs_unlink_dest(svc, dest, 0);
-		__ip_vs_del_dest(dest);
+		__ip_vs_del_dest(svc->net, dest);
 	}
 
 	/*
 	 *    Update the virtual service counters
 	 */
 	if (svc->port == FTPPORT)
-		atomic_dec(&ip_vs_ftpsvc_counter);
+		atomic_dec(&ipvs->ftpsvc_counter);
 	else if (svc->port == 0)
-		atomic_dec(&ip_vs_nullsvc_counter);
+		atomic_dec(&ipvs->nullsvc_counter);
 
 	/*
 	 *    Free the service if nobody refers to it
@@ -1385,6 +1367,7 @@ static void __ip_vs_del_service(struct ip_vs_service *svc)
 			      svc->fwmark,
 			      IP_VS_DBG_ADDR(svc->af, &svc->addr),
 			      ntohs(svc->port), atomic_read(&svc->usecnt));
+		free_percpu(svc->stats.cpustats);
 		kfree(svc);
 	}
 
@@ -1430,17 +1413,19 @@ static int ip_vs_del_service(struct ip_vs_service *svc)
 /*
  *	Flush all the virtual services
  */
-static int ip_vs_flush(void)
+static int ip_vs_flush(struct net *net)
 {
 	int idx;
 	struct ip_vs_service *svc, *nxt;
 
 	/*
-	 * Flush the service table hashed by <protocol,addr,port>
+	 * Flush the service table hashed by <netns,protocol,addr,port>
 	 */
 	for(idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) {
-		list_for_each_entry_safe(svc, nxt, &ip_vs_svc_table[idx], s_list) {
-			ip_vs_unlink_service(svc);
+		list_for_each_entry_safe(svc, nxt, &ip_vs_svc_table[idx],
+					 s_list) {
+			if (net_eq(svc->net, net))
+				ip_vs_unlink_service(svc);
 		}
 	}
 
@@ -1450,7 +1435,8 @@ static int ip_vs_flush(void)
 	for(idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) {
 		list_for_each_entry_safe(svc, nxt,
 					 &ip_vs_svc_fwm_table[idx], f_list) {
-			ip_vs_unlink_service(svc);
+			if (net_eq(svc->net, net))
+				ip_vs_unlink_service(svc);
 		}
 	}
 
@@ -1474,24 +1460,26 @@ static int ip_vs_zero_service(struct ip_vs_service *svc)
 	return 0;
 }
 
-static int ip_vs_zero_all(void)
+static int ip_vs_zero_all(struct net *net)
 {
 	int idx;
 	struct ip_vs_service *svc;
 
 	for(idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) {
 		list_for_each_entry(svc, &ip_vs_svc_table[idx], s_list) {
-			ip_vs_zero_service(svc);
+			if (net_eq(svc->net, net))
+				ip_vs_zero_service(svc);
 		}
 	}
 
 	for(idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) {
 		list_for_each_entry(svc, &ip_vs_svc_fwm_table[idx], f_list) {
-			ip_vs_zero_service(svc);
+			if (net_eq(svc->net, net))
+				ip_vs_zero_service(svc);
 		}
 	}
 
-	ip_vs_zero_stats(&ip_vs_stats);
+	ip_vs_zero_stats(net_ipvs(net)->tot_stats);
 	return 0;
 }
 
@@ -1500,6 +1488,7 @@ static int
 proc_do_defense_mode(ctl_table *table, int write,
 		     void __user *buffer, size_t *lenp, loff_t *ppos)
 {
+	struct net *net = current->nsproxy->net_ns;
 	int *valp = table->data;
 	int val = *valp;
 	int rc;
@@ -1510,7 +1499,7 @@ proc_do_defense_mode(ctl_table *table, int write,
 			/* Restore the correct value */
 			*valp = val;
 		} else {
-			update_defense_level();
+			update_defense_level(net_ipvs(net));
 		}
 	}
 	return rc;
@@ -1550,7 +1539,8 @@ proc_do_sync_mode(ctl_table *table, int write,
 			/* Restore the correct value */
 			*valp = val;
 		} else {
-			ip_vs_sync_switch_mode(val);
+			struct net *net = current->nsproxy->net_ns;
+			ip_vs_sync_switch_mode(net, val);
 		}
 	}
 	return rc;
@@ -1558,42 +1548,31 @@ proc_do_sync_mode(ctl_table *table, int write,
 
 /*
  *	IPVS sysctl table (under the /proc/sys/net/ipv4/vs/)
+ *	Do not change order or insert new entries without
+ *	align with netns init in __ip_vs_control_init()
  */
 
 static struct ctl_table vs_vars[] = {
 	{
 		.procname	= "amemthresh",
-		.data		= &sysctl_ip_vs_amemthresh,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-#ifdef CONFIG_IP_VS_DEBUG
-	{
-		.procname	= "debug_level",
-		.data		= &sysctl_ip_vs_debug_level,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
-#endif
 	{
 		.procname	= "am_droprate",
-		.data		= &sysctl_ip_vs_am_droprate,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec,
 	},
 	{
 		.procname	= "drop_entry",
-		.data		= &sysctl_ip_vs_drop_entry,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_do_defense_mode,
 	},
 	{
 		.procname	= "drop_packet",
-		.data		= &sysctl_ip_vs_drop_packet,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_do_defense_mode,
@@ -1601,7 +1580,6 @@ static struct ctl_table vs_vars[] = {
 #ifdef CONFIG_IP_VS_NFCT
 	{
 		.procname	= "conntrack",
-		.data		= &sysctl_ip_vs_conntrack,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
@@ -1609,25 +1587,62 @@ static struct ctl_table vs_vars[] = {
 #endif
 	{
 		.procname	= "secure_tcp",
-		.data		= &sysctl_ip_vs_secure_tcp,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_do_defense_mode,
 	},
 	{
 		.procname	= "snat_reroute",
-		.data		= &sysctl_ip_vs_snat_reroute,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
 	},
 	{
 		.procname	= "sync_version",
-		.data		= &sysctl_ip_vs_sync_ver,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= &proc_do_sync_mode,
 	},
+	{
+		.procname	= "cache_bypass",
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "expire_nodest_conn",
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "expire_quiescent_template",
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+	{
+		.procname	= "sync_threshold",
+		.maxlen		=
+			sizeof(((struct netns_ipvs *)0)->sysctl_sync_threshold),
+		.mode		= 0644,
+		.proc_handler	= proc_do_sync_threshold,
+	},
+	{
+		.procname	= "nat_icmp_send",
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#ifdef CONFIG_IP_VS_DEBUG
+	{
+		.procname	= "debug_level",
+		.data		= &sysctl_ip_vs_debug_level,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec,
+	},
+#endif
 #if 0
 	{
 		.procname	= "timeout_established",
@@ -1714,41 +1729,6 @@ static struct ctl_table vs_vars[] = {
 		.proc_handler	= proc_dointvec_jiffies,
 	},
 #endif
-	{
-		.procname	= "cache_bypass",
-		.data		= &sysctl_ip_vs_cache_bypass,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "expire_nodest_conn",
-		.data		= &sysctl_ip_vs_expire_nodest_conn,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "expire_quiescent_template",
-		.data		= &sysctl_ip_vs_expire_quiescent_template,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
-	{
-		.procname	= "sync_threshold",
-		.data		= &sysctl_ip_vs_sync_threshold,
-		.maxlen		= sizeof(sysctl_ip_vs_sync_threshold),
-		.mode		= 0644,
-		.proc_handler	= proc_do_sync_threshold,
-	},
-	{
-		.procname	= "nat_icmp_send",
-		.data		= &sysctl_ip_vs_nat_icmp_send,
-		.maxlen		= sizeof(int),
-		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
-	},
 	{ }
 };
 
@@ -1760,11 +1740,10 @@ const struct ctl_path net_vs_ctl_path[] = {
 };
 EXPORT_SYMBOL_GPL(net_vs_ctl_path);
 
-static struct ctl_table_header * sysctl_header;
-
 #ifdef CONFIG_PROC_FS
 
 struct ip_vs_iter {
+	struct seq_net_private p;  /* Do not move this, netns depends upon it*/
 	struct list_head *table;
 	int bucket;
 };
@@ -1791,6 +1770,7 @@ static inline const char *ip_vs_fwd_name(unsigned flags)
 /* Get the Nth entry in the two lists */
 static struct ip_vs_service *ip_vs_info_array(struct seq_file *seq, loff_t pos)
 {
+	struct net *net = seq_file_net(seq);
 	struct ip_vs_iter *iter = seq->private;
 	int idx;
 	struct ip_vs_service *svc;
@@ -1798,7 +1778,7 @@ static struct ip_vs_service *ip_vs_info_array(struct seq_file *seq, loff_t pos)
 	/* look in hash by protocol */
 	for (idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) {
 		list_for_each_entry(svc, &ip_vs_svc_table[idx], s_list) {
-			if (pos-- == 0){
+			if (net_eq(svc->net, net) && pos-- == 0) {
 				iter->table = ip_vs_svc_table;
 				iter->bucket = idx;
 				return svc;
@@ -1809,7 +1789,7 @@ static struct ip_vs_service *ip_vs_info_array(struct seq_file *seq, loff_t pos)
 	/* keep looking in fwmark */
 	for (idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) {
 		list_for_each_entry(svc, &ip_vs_svc_fwm_table[idx], f_list) {
-			if (pos-- == 0) {
+			if (net_eq(svc->net, net) && pos-- == 0) {
 				iter->table = ip_vs_svc_fwm_table;
 				iter->bucket = idx;
 				return svc;
@@ -1963,7 +1943,7 @@ static const struct seq_operations ip_vs_info_seq_ops = {
 
 static int ip_vs_info_open(struct inode *inode, struct file *file)
 {
-	return seq_open_private(file, &ip_vs_info_seq_ops,
+	return seq_open_net(inode, file, &ip_vs_info_seq_ops,
 			sizeof(struct ip_vs_iter));
 }
 
@@ -1977,13 +1957,11 @@ static const struct file_operations ip_vs_info_fops = {
 
 #endif
 
-struct ip_vs_stats ip_vs_stats = {
-	.lock = __SPIN_LOCK_UNLOCKED(ip_vs_stats.lock),
-};
-
 #ifdef CONFIG_PROC_FS
 static int ip_vs_stats_show(struct seq_file *seq, void *v)
 {
+	struct net *net = seq_file_single_net(seq);
+	struct ip_vs_stats *tot_stats = net_ipvs(net)->tot_stats;
 
 /*               01234567 01234567 01234567 0123456701234567 0123456701234567 */
 	seq_puts(seq,
@@ -1991,29 +1969,29 @@ static int ip_vs_stats_show(struct seq_file *seq, void *v)
 	seq_printf(seq,
 		   "   Conns  Packets  Packets            Bytes            Bytes\n");
 
-	spin_lock_bh(&ip_vs_stats.lock);
-	seq_printf(seq, "%8X %8X %8X %16LX %16LX\n\n", ip_vs_stats.ustats.conns,
-		   ip_vs_stats.ustats.inpkts, ip_vs_stats.ustats.outpkts,
-		   (unsigned long long) ip_vs_stats.ustats.inbytes,
-		   (unsigned long long) ip_vs_stats.ustats.outbytes);
+	spin_lock_bh(&tot_stats->lock);
+	seq_printf(seq, "%8X %8X %8X %16LX %16LX\n\n", tot_stats->ustats.conns,
+		   tot_stats->ustats.inpkts, tot_stats->ustats.outpkts,
+		   (unsigned long long) tot_stats->ustats.inbytes,
+		   (unsigned long long) tot_stats->ustats.outbytes);
 
 /*                 01234567 01234567 01234567 0123456701234567 0123456701234567 */
 	seq_puts(seq,
 		   " Conns/s   Pkts/s   Pkts/s          Bytes/s          Bytes/s\n");
 	seq_printf(seq,"%8X %8X %8X %16X %16X\n",
-			ip_vs_stats.ustats.cps,
-			ip_vs_stats.ustats.inpps,
-			ip_vs_stats.ustats.outpps,
-			ip_vs_stats.ustats.inbps,
-			ip_vs_stats.ustats.outbps);
-	spin_unlock_bh(&ip_vs_stats.lock);
+			tot_stats->ustats.cps,
+			tot_stats->ustats.inpps,
+			tot_stats->ustats.outpps,
+			tot_stats->ustats.inbps,
+			tot_stats->ustats.outbps);
+	spin_unlock_bh(&tot_stats->lock);
 
 	return 0;
 }
 
 static int ip_vs_stats_seq_open(struct inode *inode, struct file *file)
 {
-	return single_open(file, ip_vs_stats_show, NULL);
+	return single_open_net(inode, file, ip_vs_stats_show);
 }
 
 static const struct file_operations ip_vs_stats_fops = {
@@ -2024,13 +2002,68 @@ static const struct file_operations ip_vs_stats_fops = {
 	.release = single_release,
 };
 
+static int ip_vs_stats_percpu_show(struct seq_file *seq, void *v)
+{
+	struct net *net = seq_file_single_net(seq);
+	struct ip_vs_stats *tot_stats = net_ipvs(net)->tot_stats;
+	int i;
+
+/*               01234567 01234567 01234567 0123456701234567 0123456701234567 */
+	seq_puts(seq,
+		 "       Total Incoming Outgoing         Incoming         Outgoing\n");
+	seq_printf(seq,
+		   "CPU    Conns  Packets  Packets            Bytes            Bytes\n");
+
+	for_each_possible_cpu(i) {
+		struct ip_vs_cpu_stats *u = per_cpu_ptr(net->ipvs->cpustats, i);
+		seq_printf(seq, "%3X %8X %8X %8X %16LX %16LX\n",
+			    i, u->ustats.conns, u->ustats.inpkts,
+			    u->ustats.outpkts, (__u64)u->ustats.inbytes,
+			    (__u64)u->ustats.outbytes);
+	}
+
+	spin_lock_bh(&tot_stats->lock);
+	seq_printf(seq, "  ~ %8X %8X %8X %16LX %16LX\n\n",
+		   tot_stats->ustats.conns, tot_stats->ustats.inpkts,
+		   tot_stats->ustats.outpkts,
+		   (unsigned long long) tot_stats->ustats.inbytes,
+		   (unsigned long long) tot_stats->ustats.outbytes);
+
+/*                 01234567 01234567 01234567 0123456701234567 0123456701234567 */
+	seq_puts(seq,
+		   "     Conns/s   Pkts/s   Pkts/s          Bytes/s          Bytes/s\n");
+	seq_printf(seq, "    %8X %8X %8X %16X %16X\n",
+			tot_stats->ustats.cps,
+			tot_stats->ustats.inpps,
+			tot_stats->ustats.outpps,
+			tot_stats->ustats.inbps,
+			tot_stats->ustats.outbps);
+	spin_unlock_bh(&tot_stats->lock);
+
+	return 0;
+}
+
+static int ip_vs_stats_percpu_seq_open(struct inode *inode, struct file *file)
+{
+	return single_open_net(inode, file, ip_vs_stats_percpu_show);
+}
+
+static const struct file_operations ip_vs_stats_percpu_fops = {
+	.owner = THIS_MODULE,
+	.open = ip_vs_stats_percpu_seq_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
 #endif
 
 /*
  *	Set timeout values for tcp tcpfin udp in the timeout_table.
  */
-static int ip_vs_set_timeout(struct ip_vs_timeout_user *u)
+static int ip_vs_set_timeout(struct net *net, struct ip_vs_timeout_user *u)
 {
+	struct ip_vs_proto_data *pd;
+
 	IP_VS_DBG(2, "Setting timeout tcp:%d tcpfin:%d udp:%d\n",
 		  u->tcp_timeout,
 		  u->tcp_fin_timeout,
@@ -2038,19 +2071,22 @@ static int ip_vs_set_timeout(struct ip_vs_timeout_user *u)
 
 #ifdef CONFIG_IP_VS_PROTO_TCP
 	if (u->tcp_timeout) {
-		ip_vs_protocol_tcp.timeout_table[IP_VS_TCP_S_ESTABLISHED]
+		pd = ip_vs_proto_data_get(net, IPPROTO_TCP);
+		pd->timeout_table[IP_VS_TCP_S_ESTABLISHED]
 			= u->tcp_timeout * HZ;
 	}
 
 	if (u->tcp_fin_timeout) {
-		ip_vs_protocol_tcp.timeout_table[IP_VS_TCP_S_FIN_WAIT]
+		pd = ip_vs_proto_data_get(net, IPPROTO_TCP);
+		pd->timeout_table[IP_VS_TCP_S_FIN_WAIT]
 			= u->tcp_fin_timeout * HZ;
 	}
 #endif
 
 #ifdef CONFIG_IP_VS_PROTO_UDP
 	if (u->udp_timeout) {
-		ip_vs_protocol_udp.timeout_table[IP_VS_UDP_S_NORMAL]
+		pd = ip_vs_proto_data_get(net, IPPROTO_UDP);
+		pd->timeout_table[IP_VS_UDP_S_NORMAL]
 			= u->udp_timeout * HZ;
 	}
 #endif
@@ -2115,6 +2151,7 @@ static void ip_vs_copy_udest_compat(struct ip_vs_dest_user_kern *udest,
 static int
 do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 {
+	struct net *net = sock_net(sk);
 	int ret;
 	unsigned char arg[MAX_ARG_LEN];
 	struct ip_vs_service_user *usvc_compat;
@@ -2149,19 +2186,20 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 
 	if (cmd == IP_VS_SO_SET_FLUSH) {
 		/* Flush the virtual service */
-		ret = ip_vs_flush();
+		ret = ip_vs_flush(net);
 		goto out_unlock;
 	} else if (cmd == IP_VS_SO_SET_TIMEOUT) {
 		/* Set timeout values for (tcp tcpfin udp) */
-		ret = ip_vs_set_timeout((struct ip_vs_timeout_user *)arg);
+		ret = ip_vs_set_timeout(net, (struct ip_vs_timeout_user *)arg);
 		goto out_unlock;
 	} else if (cmd == IP_VS_SO_SET_STARTDAEMON) {
 		struct ip_vs_daemon_user *dm = (struct ip_vs_daemon_user *)arg;
-		ret = start_sync_thread(dm->state, dm->mcast_ifn, dm->syncid);
+		ret = start_sync_thread(net, dm->state, dm->mcast_ifn,
+					dm->syncid);
 		goto out_unlock;
 	} else if (cmd == IP_VS_SO_SET_STOPDAEMON) {
 		struct ip_vs_daemon_user *dm = (struct ip_vs_daemon_user *)arg;
-		ret = stop_sync_thread(dm->state);
+		ret = stop_sync_thread(net, dm->state);
 		goto out_unlock;
 	}
 
@@ -2176,7 +2214,7 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 	if (cmd == IP_VS_SO_SET_ZERO) {
 		/* if no service address is set, zero counters in all */
 		if (!usvc.fwmark && !usvc.addr.ip && !usvc.port) {
-			ret = ip_vs_zero_all();
+			ret = ip_vs_zero_all(net);
 			goto out_unlock;
 		}
 	}
@@ -2193,10 +2231,10 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 
 	/* Lookup the exact service by <protocol, addr, port> or fwmark */
 	if (usvc.fwmark == 0)
-		svc = __ip_vs_service_find(usvc.af, usvc.protocol,
+		svc = __ip_vs_service_find(net, usvc.af, usvc.protocol,
 					   &usvc.addr, usvc.port);
 	else
-		svc = __ip_vs_svc_fwm_find(usvc.af, usvc.fwmark);
+		svc = __ip_vs_svc_fwm_find(net, usvc.af, usvc.fwmark);
 
 	if (cmd != IP_VS_SO_SET_ADD
 	    && (svc == NULL || svc->protocol != usvc.protocol)) {
@@ -2209,7 +2247,7 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
 		if (svc != NULL)
 			ret = -EEXIST;
 		else
-			ret = ip_vs_add_service(&usvc, &svc);
+			ret = ip_vs_add_service(net, &usvc, &svc);
 		break;
 	case IP_VS_SO_SET_EDIT:
 		ret = ip_vs_edit_service(svc, &usvc);
@@ -2269,7 +2307,8 @@ ip_vs_copy_service(struct ip_vs_service_entry *dst, struct ip_vs_service *src)
 }
 
 static inline int
-__ip_vs_get_service_entries(const struct ip_vs_get_services *get,
+__ip_vs_get_service_entries(struct net *net,
+			    const struct ip_vs_get_services *get,
 			    struct ip_vs_get_services __user *uptr)
 {
 	int idx, count=0;
@@ -2280,7 +2319,7 @@ __ip_vs_get_service_entries(const struct ip_vs_get_services *get,
 	for (idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) {
 		list_for_each_entry(svc, &ip_vs_svc_table[idx], s_list) {
 			/* Only expose IPv4 entries to old interface */
-			if (svc->af != AF_INET)
+			if (svc->af != AF_INET || !net_eq(svc->net, net))
 				continue;
 
 			if (count >= get->num_services)
@@ -2299,7 +2338,7 @@ __ip_vs_get_service_entries(const struct ip_vs_get_services *get,
 	for (idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) {
 		list_for_each_entry(svc, &ip_vs_svc_fwm_table[idx], f_list) {
 			/* Only expose IPv4 entries to old interface */
-			if (svc->af != AF_INET)
+			if (svc->af != AF_INET || !net_eq(svc->net, net))
 				continue;
 
 			if (count >= get->num_services)
@@ -2319,7 +2358,7 @@ __ip_vs_get_service_entries(const struct ip_vs_get_services *get,
 }
 
 static inline int
-__ip_vs_get_dest_entries(const struct ip_vs_get_dests *get,
+__ip_vs_get_dest_entries(struct net *net, const struct ip_vs_get_dests *get,
 			 struct ip_vs_get_dests __user *uptr)
 {
 	struct ip_vs_service *svc;
@@ -2327,9 +2366,9 @@ __ip_vs_get_dest_entries(const struct ip_vs_get_dests *get,
 	int ret = 0;
 
 	if (get->fwmark)
-		svc = __ip_vs_svc_fwm_find(AF_INET, get->fwmark);
+		svc = __ip_vs_svc_fwm_find(net, AF_INET, get->fwmark);
 	else
-		svc = __ip_vs_service_find(AF_INET, get->protocol, &addr,
+		svc = __ip_vs_service_find(net, AF_INET, get->protocol, &addr,
 					   get->port);
 
 	if (svc) {
@@ -2364,17 +2403,19 @@ __ip_vs_get_dest_entries(const struct ip_vs_get_dests *get,
 }
 
 static inline void
-__ip_vs_get_timeouts(struct ip_vs_timeout_user *u)
+__ip_vs_get_timeouts(struct net *net, struct ip_vs_timeout_user *u)
 {
+	struct ip_vs_proto_data *pd;
+
 #ifdef CONFIG_IP_VS_PROTO_TCP
-	u->tcp_timeout =
-		ip_vs_protocol_tcp.timeout_table[IP_VS_TCP_S_ESTABLISHED] / HZ;
-	u->tcp_fin_timeout =
-		ip_vs_protocol_tcp.timeout_table[IP_VS_TCP_S_FIN_WAIT] / HZ;
+	pd = ip_vs_proto_data_get(net, IPPROTO_TCP);
+	u->tcp_timeout = pd->timeout_table[IP_VS_TCP_S_ESTABLISHED] / HZ;
+	u->tcp_fin_timeout = pd->timeout_table[IP_VS_TCP_S_FIN_WAIT] / HZ;
 #endif
 #ifdef CONFIG_IP_VS_PROTO_UDP
+	pd = ip_vs_proto_data_get(net, IPPROTO_UDP);
 	u->udp_timeout =
-		ip_vs_protocol_udp.timeout_table[IP_VS_UDP_S_NORMAL] / HZ;
+			pd->timeout_table[IP_VS_UDP_S_NORMAL] / HZ;
 #endif
 }
 
@@ -2403,7 +2444,10 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 	unsigned char arg[128];
 	int ret = 0;
 	unsigned int copylen;
+	struct net *net = sock_net(sk);
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
+	BUG_ON(!net);
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
@@ -2446,7 +2490,7 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 		struct ip_vs_getinfo info;
 		info.version = IP_VS_VERSION_CODE;
 		info.size = ip_vs_conn_tab_size;
-		info.num_services = ip_vs_num_services;
+		info.num_services = ipvs->num_services;
 		if (copy_to_user(user, &info, sizeof(info)) != 0)
 			ret = -EFAULT;
 	}
@@ -2465,7 +2509,7 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 			ret = -EINVAL;
 			goto out;
 		}
-		ret = __ip_vs_get_service_entries(get, user);
+		ret = __ip_vs_get_service_entries(net, get, user);
 	}
 	break;
 
@@ -2478,10 +2522,11 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 		entry = (struct ip_vs_service_entry *)arg;
 		addr.ip = entry->addr;
 		if (entry->fwmark)
-			svc = __ip_vs_svc_fwm_find(AF_INET, entry->fwmark);
+			svc = __ip_vs_svc_fwm_find(net, AF_INET, entry->fwmark);
 		else
-			svc = __ip_vs_service_find(AF_INET, entry->protocol,
-						   &addr, entry->port);
+			svc = __ip_vs_service_find(net, AF_INET,
+						   entry->protocol, &addr,
+						   entry->port);
 		if (svc) {
 			ip_vs_copy_service(entry, svc);
 			if (copy_to_user(user, entry, sizeof(*entry)) != 0)
@@ -2504,7 +2549,7 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 			ret = -EINVAL;
 			goto out;
 		}
-		ret = __ip_vs_get_dest_entries(get, user);
+		ret = __ip_vs_get_dest_entries(net, get, user);
 	}
 	break;
 
@@ -2512,7 +2557,7 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 	{
 		struct ip_vs_timeout_user t;
 
-		__ip_vs_get_timeouts(&t);
+		__ip_vs_get_timeouts(net, &t);
 		if (copy_to_user(user, &t, sizeof(t)) != 0)
 			ret = -EFAULT;
 	}
@@ -2523,15 +2568,17 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len)
 		struct ip_vs_daemon_user d[2];
 
 		memset(&d, 0, sizeof(d));
-		if (ip_vs_sync_state & IP_VS_STATE_MASTER) {
+		if (ipvs->sync_state & IP_VS_STATE_MASTER) {
 			d[0].state = IP_VS_STATE_MASTER;
-			strlcpy(d[0].mcast_ifn, ip_vs_master_mcast_ifn, sizeof(d[0].mcast_ifn));
-			d[0].syncid = ip_vs_master_syncid;
+			strlcpy(d[0].mcast_ifn, ipvs->master_mcast_ifn,
+				sizeof(d[0].mcast_ifn));
+			d[0].syncid = ipvs->master_syncid;
 		}
-		if (ip_vs_sync_state & IP_VS_STATE_BACKUP) {
+		if (ipvs->sync_state & IP_VS_STATE_BACKUP) {
 			d[1].state = IP_VS_STATE_BACKUP;
-			strlcpy(d[1].mcast_ifn, ip_vs_backup_mcast_ifn, sizeof(d[1].mcast_ifn));
-			d[1].syncid = ip_vs_backup_syncid;
+			strlcpy(d[1].mcast_ifn, ipvs->backup_mcast_ifn,
+				sizeof(d[1].mcast_ifn));
+			d[1].syncid = ipvs->backup_syncid;
 		}
 		if (copy_to_user(user, &d, sizeof(d)) != 0)
 			ret = -EFAULT;
@@ -2570,6 +2617,7 @@ static struct genl_family ip_vs_genl_family = {
 	.name		= IPVS_GENL_NAME,
 	.version	= IPVS_GENL_VERSION,
 	.maxattr	= IPVS_CMD_MAX,
+	.netnsok        = true,         /* Make ipvsadm to work on netns */
 };
 
 /* Policy used for first-level command attributes */
@@ -2724,11 +2772,12 @@ static int ip_vs_genl_dump_services(struct sk_buff *skb,
 	int idx = 0, i;
 	int start = cb->args[0];
 	struct ip_vs_service *svc;
+	struct net *net = skb_sknet(skb);
 
 	mutex_lock(&__ip_vs_mutex);
 	for (i = 0; i < IP_VS_SVC_TAB_SIZE; i++) {
 		list_for_each_entry(svc, &ip_vs_svc_table[i], s_list) {
-			if (++idx <= start)
+			if (++idx <= start || !net_eq(svc->net, net))
 				continue;
 			if (ip_vs_genl_dump_service(skb, svc, cb) < 0) {
 				idx--;
@@ -2739,7 +2788,7 @@ static int ip_vs_genl_dump_services(struct sk_buff *skb,
 
 	for (i = 0; i < IP_VS_SVC_TAB_SIZE; i++) {
 		list_for_each_entry(svc, &ip_vs_svc_fwm_table[i], f_list) {
-			if (++idx <= start)
+			if (++idx <= start || !net_eq(svc->net, net))
 				continue;
 			if (ip_vs_genl_dump_service(skb, svc, cb) < 0) {
 				idx--;
@@ -2755,7 +2804,8 @@ nla_put_failure:
 	return skb->len;
 }
 
-static int ip_vs_genl_parse_service(struct ip_vs_service_user_kern *usvc,
+static int ip_vs_genl_parse_service(struct net *net,
+				    struct ip_vs_service_user_kern *usvc,
 				    struct nlattr *nla, int full_entry,
 				    struct ip_vs_service **ret_svc)
 {
@@ -2798,9 +2848,9 @@ static int ip_vs_genl_parse_service(struct ip_vs_service_user_kern *usvc,
 	}
 
 	if (usvc->fwmark)
-		svc = __ip_vs_svc_fwm_find(usvc->af, usvc->fwmark);
+		svc = __ip_vs_svc_fwm_find(net, usvc->af, usvc->fwmark);
 	else
-		svc = __ip_vs_service_find(usvc->af, usvc->protocol,
+		svc = __ip_vs_service_find(net, usvc->af, usvc->protocol,
 					   &usvc->addr, usvc->port);
 	*ret_svc = svc;
 
@@ -2837,13 +2887,14 @@ static int ip_vs_genl_parse_service(struct ip_vs_service_user_kern *usvc,
 	return 0;
 }
 
-static struct ip_vs_service *ip_vs_genl_find_service(struct nlattr *nla)
+static struct ip_vs_service *ip_vs_genl_find_service(struct net *net,
+						     struct nlattr *nla)
 {
 	struct ip_vs_service_user_kern usvc;
 	struct ip_vs_service *svc;
 	int ret;
 
-	ret = ip_vs_genl_parse_service(&usvc, nla, 0, &svc);
+	ret = ip_vs_genl_parse_service(net, &usvc, nla, 0, &svc);
 	return ret ? ERR_PTR(ret) : svc;
 }
 
@@ -2911,6 +2962,7 @@ static int ip_vs_genl_dump_dests(struct sk_buff *skb,
 	struct ip_vs_service *svc;
 	struct ip_vs_dest *dest;
 	struct nlattr *attrs[IPVS_CMD_ATTR_MAX + 1];
+	struct net *net = skb_sknet(skb);
 
 	mutex_lock(&__ip_vs_mutex);
 
@@ -2919,7 +2971,8 @@ static int ip_vs_genl_dump_dests(struct sk_buff *skb,
 			IPVS_CMD_ATTR_MAX, ip_vs_cmd_policy))
 		goto out_err;
 
-	svc = ip_vs_genl_find_service(attrs[IPVS_CMD_ATTR_SERVICE]);
+
+	svc = ip_vs_genl_find_service(net, attrs[IPVS_CMD_ATTR_SERVICE]);
 	if (IS_ERR(svc) || svc == NULL)
 		goto out_err;
 
@@ -3033,20 +3086,23 @@ nla_put_failure:
 static int ip_vs_genl_dump_daemons(struct sk_buff *skb,
 				   struct netlink_callback *cb)
 {
+	struct net *net = skb_net(skb);
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
 	mutex_lock(&__ip_vs_mutex);
-	if ((ip_vs_sync_state & IP_VS_STATE_MASTER) && !cb->args[0]) {
+	if ((ipvs->sync_state & IP_VS_STATE_MASTER) && !cb->args[0]) {
 		if (ip_vs_genl_dump_daemon(skb, IP_VS_STATE_MASTER,
-					   ip_vs_master_mcast_ifn,
-					   ip_vs_master_syncid, cb) < 0)
+					   ipvs->master_mcast_ifn,
+					   ipvs->master_syncid, cb) < 0)
 			goto nla_put_failure;
 
 		cb->args[0] = 1;
 	}
 
-	if ((ip_vs_sync_state & IP_VS_STATE_BACKUP) && !cb->args[1]) {
+	if ((ipvs->sync_state & IP_VS_STATE_BACKUP) && !cb->args[1]) {
 		if (ip_vs_genl_dump_daemon(skb, IP_VS_STATE_BACKUP,
-					   ip_vs_backup_mcast_ifn,
-					   ip_vs_backup_syncid, cb) < 0)
+					   ipvs->backup_mcast_ifn,
+					   ipvs->backup_syncid, cb) < 0)
 			goto nla_put_failure;
 
 		cb->args[1] = 1;
@@ -3058,31 +3114,33 @@ nla_put_failure:
 	return skb->len;
 }
 
-static int ip_vs_genl_new_daemon(struct nlattr **attrs)
+static int ip_vs_genl_new_daemon(struct net *net, struct nlattr **attrs)
 {
 	if (!(attrs[IPVS_DAEMON_ATTR_STATE] &&
 	      attrs[IPVS_DAEMON_ATTR_MCAST_IFN] &&
 	      attrs[IPVS_DAEMON_ATTR_SYNC_ID]))
 		return -EINVAL;
 
-	return start_sync_thread(nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]),
+	return start_sync_thread(net,
+				 nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]),
 				 nla_data(attrs[IPVS_DAEMON_ATTR_MCAST_IFN]),
 				 nla_get_u32(attrs[IPVS_DAEMON_ATTR_SYNC_ID]));
 }
 
-static int ip_vs_genl_del_daemon(struct nlattr **attrs)
+static int ip_vs_genl_del_daemon(struct net *net, struct nlattr **attrs)
 {
 	if (!attrs[IPVS_DAEMON_ATTR_STATE])
 		return -EINVAL;
 
-	return stop_sync_thread(nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]));
+	return stop_sync_thread(net,
+				nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]));
 }
 
-static int ip_vs_genl_set_config(struct nlattr **attrs)
+static int ip_vs_genl_set_config(struct net *net, struct nlattr **attrs)
 {
 	struct ip_vs_timeout_user t;
 
-	__ip_vs_get_timeouts(&t);
+	__ip_vs_get_timeouts(net, &t);
 
 	if (attrs[IPVS_CMD_ATTR_TIMEOUT_TCP])
 		t.tcp_timeout = nla_get_u32(attrs[IPVS_CMD_ATTR_TIMEOUT_TCP]);
@@ -3094,7 +3152,7 @@ static int ip_vs_genl_set_config(struct nlattr **attrs)
 	if (attrs[IPVS_CMD_ATTR_TIMEOUT_UDP])
 		t.udp_timeout = nla_get_u32(attrs[IPVS_CMD_ATTR_TIMEOUT_UDP]);
 
-	return ip_vs_set_timeout(&t);
+	return ip_vs_set_timeout(net, &t);
 }
 
 static int ip_vs_genl_set_cmd(struct sk_buff *skb, struct genl_info *info)
@@ -3104,16 +3162,20 @@ static int ip_vs_genl_set_cmd(struct sk_buff *skb, struct genl_info *info)
 	struct ip_vs_dest_user_kern udest;
 	int ret = 0, cmd;
 	int need_full_svc = 0, need_full_dest = 0;
+	struct net *net;
+	struct netns_ipvs *ipvs;
 
+	net = skb_sknet(skb);
+	ipvs = net_ipvs(net);
 	cmd = info->genlhdr->cmd;
 
 	mutex_lock(&__ip_vs_mutex);
 
 	if (cmd == IPVS_CMD_FLUSH) {
-		ret = ip_vs_flush();
+		ret = ip_vs_flush(net);
 		goto out;
 	} else if (cmd == IPVS_CMD_SET_CONFIG) {
-		ret = ip_vs_genl_set_config(info->attrs);
+		ret = ip_vs_genl_set_config(net, info->attrs);
 		goto out;
 	} else if (cmd == IPVS_CMD_NEW_DAEMON ||
 		   cmd == IPVS_CMD_DEL_DAEMON) {
@@ -3129,13 +3191,13 @@ static int ip_vs_genl_set_cmd(struct sk_buff *skb, struct genl_info *info)
 		}
 
 		if (cmd == IPVS_CMD_NEW_DAEMON)
-			ret = ip_vs_genl_new_daemon(daemon_attrs);
+			ret = ip_vs_genl_new_daemon(net, daemon_attrs);
 		else
-			ret = ip_vs_genl_del_daemon(daemon_attrs);
+			ret = ip_vs_genl_del_daemon(net, daemon_attrs);
 		goto out;
 	} else if (cmd == IPVS_CMD_ZERO &&
 		   !info->attrs[IPVS_CMD_ATTR_SERVICE]) {
-		ret = ip_vs_zero_all();
+		ret = ip_vs_zero_all(net);
 		goto out;
 	}
 
@@ -3145,7 +3207,7 @@ static int ip_vs_genl_set_cmd(struct sk_buff *skb, struct genl_info *info)
 	if (cmd == IPVS_CMD_NEW_SERVICE || cmd == IPVS_CMD_SET_SERVICE)
 		need_full_svc = 1;
 
-	ret = ip_vs_genl_parse_service(&usvc,
+	ret = ip_vs_genl_parse_service(net, &usvc,
 				       info->attrs[IPVS_CMD_ATTR_SERVICE],
 				       need_full_svc, &svc);
 	if (ret)
@@ -3175,7 +3237,7 @@ static int ip_vs_genl_set_cmd(struct sk_buff *skb, struct genl_info *info)
 	switch (cmd) {
 	case IPVS_CMD_NEW_SERVICE:
 		if (svc == NULL)
-			ret = ip_vs_add_service(&usvc, &svc);
+			ret = ip_vs_add_service(net, &usvc, &svc);
 		else
 			ret = -EEXIST;
 		break;
@@ -3213,7 +3275,11 @@ static int ip_vs_genl_get_cmd(struct sk_buff *skb, struct genl_info *info)
 	struct sk_buff *msg;
 	void *reply;
 	int ret, cmd, reply_cmd;
+	struct net *net;
+	struct netns_ipvs *ipvs;
 
+	net = skb_sknet(skb);
+	ipvs = net_ipvs(net);
 	cmd = info->genlhdr->cmd;
 
 	if (cmd == IPVS_CMD_GET_SERVICE)
@@ -3242,7 +3308,8 @@ static int ip_vs_genl_get_cmd(struct sk_buff *skb, struct genl_info *info)
 	{
 		struct ip_vs_service *svc;
 
-		svc = ip_vs_genl_find_service(info->attrs[IPVS_CMD_ATTR_SERVICE]);
+		svc = ip_vs_genl_find_service(net,
+					      info->attrs[IPVS_CMD_ATTR_SERVICE]);
 		if (IS_ERR(svc)) {
 			ret = PTR_ERR(svc);
 			goto out_err;
@@ -3262,7 +3329,7 @@ static int ip_vs_genl_get_cmd(struct sk_buff *skb, struct genl_info *info)
 	{
 		struct ip_vs_timeout_user t;
 
-		__ip_vs_get_timeouts(&t);
+		__ip_vs_get_timeouts(net, &t);
 #ifdef CONFIG_IP_VS_PROTO_TCP
 		NLA_PUT_U32(msg, IPVS_CMD_ATTR_TIMEOUT_TCP, t.tcp_timeout);
 		NLA_PUT_U32(msg, IPVS_CMD_ATTR_TIMEOUT_TCP_FIN,
@@ -3408,62 +3475,172 @@ static void ip_vs_genl_unregister(void)
 
 /* End of Generic Netlink interface definitions */
 
+/*
+ * per netns intit/exit func.
+ */
+int __net_init __ip_vs_control_init(struct net *net)
+{
+	int idx;
+	struct netns_ipvs *ipvs = net_ipvs(net);
+	struct ctl_table *tbl;
+
+	atomic_set(&ipvs->dropentry, 0);
+	spin_lock_init(&ipvs->dropentry_lock);
+	spin_lock_init(&ipvs->droppacket_lock);
+	spin_lock_init(&ipvs->securetcp_lock);
+	ipvs->rs_lock = __RW_LOCK_UNLOCKED(ipvs->rs_lock);
+
+	/* Initialize rs_table */
+	for (idx = 0; idx < IP_VS_RTAB_SIZE; idx++)
+		INIT_LIST_HEAD(&ipvs->rs_table[idx]);
+
+	INIT_LIST_HEAD(&ipvs->dest_trash);
+	atomic_set(&ipvs->ftpsvc_counter, 0);
+	atomic_set(&ipvs->nullsvc_counter, 0);
+
+	/* procfs stats */
+	ipvs->tot_stats = kzalloc(sizeof(struct ip_vs_stats), GFP_KERNEL);
+	if (ipvs->tot_stats == NULL) {
+		pr_err("%s(): no memory.\n", __func__);
+		return -ENOMEM;
+	}
+	ipvs->cpustats = alloc_percpu(struct ip_vs_cpu_stats);
+	if (!ipvs->cpustats) {
+		pr_err("%s() alloc_percpu failed\n", __func__);
+		goto err_alloc;
+	}
+	spin_lock_init(&ipvs->tot_stats->lock);
+
+	for (idx = 0; idx < IP_VS_RTAB_SIZE; idx++)
+		INIT_LIST_HEAD(&ipvs->rs_table[idx]);
+
+	proc_net_fops_create(net, "ip_vs", 0, &ip_vs_info_fops);
+	proc_net_fops_create(net, "ip_vs_stats", 0, &ip_vs_stats_fops);
+	proc_net_fops_create(net, "ip_vs_stats_percpu", 0,
+			     &ip_vs_stats_percpu_fops);
+
+	if (!net_eq(net, &init_net)) {
+		tbl = kmemdup(vs_vars, sizeof(vs_vars), GFP_KERNEL);
+		if (tbl == NULL)
+			goto err_dup;
+	} else
+		tbl = vs_vars;
+	/* Initialize sysctl defaults */
+	idx = 0;
+	ipvs->sysctl_amemthresh = 1024;
+	tbl[idx++].data = &ipvs->sysctl_amemthresh;
+	ipvs->sysctl_am_droprate = 10;
+	tbl[idx++].data = &ipvs->sysctl_am_droprate;
+	tbl[idx++].data = &ipvs->sysctl_drop_entry;
+	tbl[idx++].data = &ipvs->sysctl_drop_packet;
+#ifdef CONFIG_IP_VS_NFCT
+	tbl[idx++].data = &ipvs->sysctl_conntrack;
+#endif
+	tbl[idx++].data = &ipvs->sysctl_secure_tcp;
+	ipvs->sysctl_snat_reroute = 1;
+	tbl[idx++].data = &ipvs->sysctl_snat_reroute;
+	ipvs->sysctl_sync_ver = 1;
+	tbl[idx++].data = &ipvs->sysctl_sync_ver;
+	tbl[idx++].data = &ipvs->sysctl_cache_bypass;
+	tbl[idx++].data = &ipvs->sysctl_expire_nodest_conn;
+	tbl[idx++].data = &ipvs->sysctl_expire_quiescent_template;
+	ipvs->sysctl_sync_threshold[0] = 3;
+	ipvs->sysctl_sync_threshold[1] = 50;
+	tbl[idx].data = &ipvs->sysctl_sync_threshold;
+	tbl[idx++].maxlen = sizeof(ipvs->sysctl_sync_threshold);
+	tbl[idx++].data = &ipvs->sysctl_nat_icmp_send;
+
+
+	ipvs->sysctl_hdr = register_net_sysctl_table(net, net_vs_ctl_path,
+						  vs_vars);
+	if (ipvs->sysctl_hdr == NULL)
+		goto err_reg;
+	ip_vs_new_estimator(net, ipvs->tot_stats);
+	ipvs->sysctl_tbl = tbl;
+	/* Schedule defense work */
+	INIT_DELAYED_WORK(&ipvs->defense_work, defense_work_handler);
+	schedule_delayed_work(&ipvs->defense_work, DEFENSE_TIMER_PERIOD);
+	return 0;
+
+err_reg:
+	if (!net_eq(net, &init_net))
+		kfree(tbl);
+err_dup:
+	free_percpu(ipvs->cpustats);
+err_alloc:
+	kfree(ipvs->tot_stats);
+	return -ENOMEM;
+}
+
+static void __net_exit __ip_vs_control_cleanup(struct net *net)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	ip_vs_trash_cleanup(net);
+	ip_vs_kill_estimator(net, ipvs->tot_stats);
+	cancel_delayed_work_sync(&ipvs->defense_work);
+	cancel_work_sync(&ipvs->defense_work.work);
+	unregister_net_sysctl_table(ipvs->sysctl_hdr);
+	proc_net_remove(net, "ip_vs_stats_percpu");
+	proc_net_remove(net, "ip_vs_stats");
+	proc_net_remove(net, "ip_vs");
+	free_percpu(ipvs->cpustats);
+	kfree(ipvs->tot_stats);
+}
+
+static struct pernet_operations ipvs_control_ops = {
+	.init = __ip_vs_control_init,
+	.exit = __ip_vs_control_cleanup,
+};
 
 int __init ip_vs_control_init(void)
 {
-	int ret;
 	int idx;
+	int ret;
 
 	EnterFunction(2);
 
-	/* Initialize ip_vs_svc_table, ip_vs_svc_fwm_table, ip_vs_rtable */
+	/* Initialize svc_table, ip_vs_svc_fwm_table, rs_table */
 	for(idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++)  {
 		INIT_LIST_HEAD(&ip_vs_svc_table[idx]);
 		INIT_LIST_HEAD(&ip_vs_svc_fwm_table[idx]);
 	}
-	for(idx = 0; idx < IP_VS_RTAB_SIZE; idx++)  {
-		INIT_LIST_HEAD(&ip_vs_rtable[idx]);
+
+	ret = register_pernet_subsys(&ipvs_control_ops);
+	if (ret) {
+		pr_err("cannot register namespace.\n");
+		goto err;
 	}
-	smp_wmb();
+
+	smp_wmb();	/* Do we really need it now ? */
 
 	ret = nf_register_sockopt(&ip_vs_sockopts);
 	if (ret) {
 		pr_err("cannot register sockopt.\n");
-		return ret;
+		goto err_net;
 	}
 
 	ret = ip_vs_genl_register();
 	if (ret) {
 		pr_err("cannot register Generic Netlink interface.\n");
 		nf_unregister_sockopt(&ip_vs_sockopts);
-		return ret;
+		goto err_net;
 	}
 
-	proc_net_fops_create(&init_net, "ip_vs", 0, &ip_vs_info_fops);
-	proc_net_fops_create(&init_net, "ip_vs_stats",0, &ip_vs_stats_fops);
-
-	sysctl_header = register_sysctl_paths(net_vs_ctl_path, vs_vars);
-
-	ip_vs_new_estimator(&ip_vs_stats);
-
-	/* Hook the defense timer */
-	schedule_delayed_work(&defense_work, DEFENSE_TIMER_PERIOD);
-
 	LeaveFunction(2);
 	return 0;
+
+err_net:
+	unregister_pernet_subsys(&ipvs_control_ops);
+err:
+	return ret;
 }
 
 
 void ip_vs_control_cleanup(void)
 {
 	EnterFunction(2);
-	ip_vs_trash_cleanup();
-	cancel_rearming_delayed_work(&defense_work);
-	cancel_work_sync(&defense_work.work);
-	ip_vs_kill_estimator(&ip_vs_stats);
-	unregister_sysctl_table(sysctl_header);
-	proc_net_remove(&init_net, "ip_vs_stats");
-	proc_net_remove(&init_net, "ip_vs");
+	unregister_pernet_subsys(&ipvs_control_ops);
 	ip_vs_genl_unregister();
 	nf_unregister_sockopt(&ip_vs_sockopts);
 	LeaveFunction(2);
diff --git a/net/netfilter/ipvs/ip_vs_est.c b/net/netfilter/ipvs/ip_vs_est.c
index ff28801962e..f560a05c965 100644
--- a/net/netfilter/ipvs/ip_vs_est.c
+++ b/net/netfilter/ipvs/ip_vs_est.c
@@ -8,8 +8,12 @@
  *              as published by the Free Software Foundation; either version
  *              2 of the License, or (at your option) any later version.
  *
- * Changes:
- *
+ * Changes:     Hans Schillstrom <hans.schillstrom@ericsson.com>
+ *              Network name space (netns) aware.
+ *              Global data moved to netns i.e struct netns_ipvs
+ *              Affected data: est_list and est_lock.
+ *              estimation_timer() runs with timer per netns.
+ *              get_stats()) do the per cpu summing.
  */
 
 #define KMSG_COMPONENT "IPVS"
@@ -48,11 +52,42 @@
  */
 
 
-static void estimation_timer(unsigned long arg);
+/*
+ * Make a summary from each cpu
+ */
+static void ip_vs_read_cpu_stats(struct ip_vs_stats_user *sum,
+				 struct ip_vs_cpu_stats *stats)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		struct ip_vs_cpu_stats *s = per_cpu_ptr(stats, i);
+		unsigned int start;
+		__u64 inbytes, outbytes;
+		if (i) {
+			sum->conns += s->ustats.conns;
+			sum->inpkts += s->ustats.inpkts;
+			sum->outpkts += s->ustats.outpkts;
+			do {
+				start = u64_stats_fetch_begin_bh(&s->syncp);
+				inbytes = s->ustats.inbytes;
+				outbytes = s->ustats.outbytes;
+			} while (u64_stats_fetch_retry_bh(&s->syncp, start));
+			sum->inbytes += inbytes;
+			sum->outbytes += outbytes;
+		} else {
+			sum->conns = s->ustats.conns;
+			sum->inpkts = s->ustats.inpkts;
+			sum->outpkts = s->ustats.outpkts;
+			do {
+				start = u64_stats_fetch_begin_bh(&s->syncp);
+				sum->inbytes = s->ustats.inbytes;
+				sum->outbytes = s->ustats.outbytes;
+			} while (u64_stats_fetch_retry_bh(&s->syncp, start));
+		}
+	}
+}
 
-static LIST_HEAD(est_list);
-static DEFINE_SPINLOCK(est_lock);
-static DEFINE_TIMER(est_timer, estimation_timer, 0, 0);
 
 static void estimation_timer(unsigned long arg)
 {
@@ -62,11 +97,16 @@ static void estimation_timer(unsigned long arg)
 	u32 n_inpkts, n_outpkts;
 	u64 n_inbytes, n_outbytes;
 	u32 rate;
+	struct net *net = (struct net *)arg;
+	struct netns_ipvs *ipvs;
 
-	spin_lock(&est_lock);
-	list_for_each_entry(e, &est_list, list) {
+	ipvs = net_ipvs(net);
+	ip_vs_read_cpu_stats(&ipvs->tot_stats->ustats, ipvs->cpustats);
+	spin_lock(&ipvs->est_lock);
+	list_for_each_entry(e, &ipvs->est_list, list) {
 		s = container_of(e, struct ip_vs_stats, est);
 
+		ip_vs_read_cpu_stats(&s->ustats, s->cpustats);
 		spin_lock(&s->lock);
 		n_conns = s->ustats.conns;
 		n_inpkts = s->ustats.inpkts;
@@ -75,38 +115,39 @@ static void estimation_timer(unsigned long arg)
 		n_outbytes = s->ustats.outbytes;
 
 		/* scaled by 2^10, but divided 2 seconds */
-		rate = (n_conns - e->last_conns)<<9;
+		rate = (n_conns - e->last_conns) << 9;
 		e->last_conns = n_conns;
-		e->cps += ((long)rate - (long)e->cps)>>2;
-		s->ustats.cps = (e->cps+0x1FF)>>10;
+		e->cps += ((long)rate - (long)e->cps) >> 2;
+		s->ustats.cps = (e->cps + 0x1FF) >> 10;
 
-		rate = (n_inpkts - e->last_inpkts)<<9;
+		rate = (n_inpkts - e->last_inpkts) << 9;
 		e->last_inpkts = n_inpkts;
-		e->inpps += ((long)rate - (long)e->inpps)>>2;
-		s->ustats.inpps = (e->inpps+0x1FF)>>10;
+		e->inpps += ((long)rate - (long)e->inpps) >> 2;
+		s->ustats.inpps = (e->inpps + 0x1FF) >> 10;
 
-		rate = (n_outpkts - e->last_outpkts)<<9;
+		rate = (n_outpkts - e->last_outpkts) << 9;
 		e->last_outpkts = n_outpkts;
-		e->outpps += ((long)rate - (long)e->outpps)>>2;
-		s->ustats.outpps = (e->outpps+0x1FF)>>10;
+		e->outpps += ((long)rate - (long)e->outpps) >> 2;
+		s->ustats.outpps = (e->outpps + 0x1FF) >> 10;
 
-		rate = (n_inbytes - e->last_inbytes)<<4;
+		rate = (n_inbytes - e->last_inbytes) << 4;
 		e->last_inbytes = n_inbytes;
-		e->inbps += ((long)rate - (long)e->inbps)>>2;
-		s->ustats.inbps = (e->inbps+0xF)>>5;
+		e->inbps += ((long)rate - (long)e->inbps) >> 2;
+		s->ustats.inbps = (e->inbps + 0xF) >> 5;
 
-		rate = (n_outbytes - e->last_outbytes)<<4;
+		rate = (n_outbytes - e->last_outbytes) << 4;
 		e->last_outbytes = n_outbytes;
-		e->outbps += ((long)rate - (long)e->outbps)>>2;
-		s->ustats.outbps = (e->outbps+0xF)>>5;
+		e->outbps += ((long)rate - (long)e->outbps) >> 2;
+		s->ustats.outbps = (e->outbps + 0xF) >> 5;
 		spin_unlock(&s->lock);
 	}
-	spin_unlock(&est_lock);
-	mod_timer(&est_timer, jiffies + 2*HZ);
+	spin_unlock(&ipvs->est_lock);
+	mod_timer(&ipvs->est_timer, jiffies + 2*HZ);
 }
 
-void ip_vs_new_estimator(struct ip_vs_stats *stats)
+void ip_vs_new_estimator(struct net *net, struct ip_vs_stats *stats)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct ip_vs_estimator *est = &stats->est;
 
 	INIT_LIST_HEAD(&est->list);
@@ -126,18 +167,19 @@ void ip_vs_new_estimator(struct ip_vs_stats *stats)
 	est->last_outbytes = stats->ustats.outbytes;
 	est->outbps = stats->ustats.outbps<<5;
 
-	spin_lock_bh(&est_lock);
-	list_add(&est->list, &est_list);
-	spin_unlock_bh(&est_lock);
+	spin_lock_bh(&ipvs->est_lock);
+	list_add(&est->list, &ipvs->est_list);
+	spin_unlock_bh(&ipvs->est_lock);
 }
 
-void ip_vs_kill_estimator(struct ip_vs_stats *stats)
+void ip_vs_kill_estimator(struct net *net, struct ip_vs_stats *stats)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct ip_vs_estimator *est = &stats->est;
 
-	spin_lock_bh(&est_lock);
+	spin_lock_bh(&ipvs->est_lock);
 	list_del(&est->list);
-	spin_unlock_bh(&est_lock);
+	spin_unlock_bh(&ipvs->est_lock);
 }
 
 void ip_vs_zero_estimator(struct ip_vs_stats *stats)
@@ -157,13 +199,35 @@ void ip_vs_zero_estimator(struct ip_vs_stats *stats)
 	est->outbps = 0;
 }
 
-int __init ip_vs_estimator_init(void)
+static int __net_init __ip_vs_estimator_init(struct net *net)
 {
-	mod_timer(&est_timer, jiffies + 2 * HZ);
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	INIT_LIST_HEAD(&ipvs->est_list);
+	spin_lock_init(&ipvs->est_lock);
+	setup_timer(&ipvs->est_timer, estimation_timer, (unsigned long)net);
+	mod_timer(&ipvs->est_timer, jiffies + 2 * HZ);
 	return 0;
 }
 
+static void __net_exit __ip_vs_estimator_exit(struct net *net)
+{
+	del_timer_sync(&net_ipvs(net)->est_timer);
+}
+static struct pernet_operations ip_vs_app_ops = {
+	.init = __ip_vs_estimator_init,
+	.exit = __ip_vs_estimator_exit,
+};
+
+int __init ip_vs_estimator_init(void)
+{
+	int rv;
+
+	rv = register_pernet_subsys(&ip_vs_app_ops);
+	return rv;
+}
+
 void ip_vs_estimator_cleanup(void)
 {
-	del_timer_sync(&est_timer);
+	unregister_pernet_subsys(&ip_vs_app_ops);
 }
diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c
index 84aef65b37d..6b5dd6ddaae 100644
--- a/net/netfilter/ipvs/ip_vs_ftp.c
+++ b/net/netfilter/ipvs/ip_vs_ftp.c
@@ -157,6 +157,7 @@ static int ip_vs_ftp_out(struct ip_vs_app *app, struct ip_vs_conn *cp,
 	int ret = 0;
 	enum ip_conntrack_info ctinfo;
 	struct nf_conn *ct;
+	struct net *net;
 
 #ifdef CONFIG_IP_VS_IPV6
 	/* This application helper doesn't work with IPv6 yet,
@@ -197,13 +198,15 @@ static int ip_vs_ftp_out(struct ip_vs_app *app, struct ip_vs_conn *cp,
 		 */
 		{
 			struct ip_vs_conn_param p;
-			ip_vs_conn_fill_param(AF_INET, iph->protocol,
-					      &from, port, &cp->caddr, 0, &p);
+			ip_vs_conn_fill_param(ip_vs_conn_net(cp), AF_INET,
+					      iph->protocol, &from, port,
+					      &cp->caddr, 0, &p);
 			n_cp = ip_vs_conn_out_get(&p);
 		}
 		if (!n_cp) {
 			struct ip_vs_conn_param p;
-			ip_vs_conn_fill_param(AF_INET, IPPROTO_TCP, &cp->caddr,
+			ip_vs_conn_fill_param(ip_vs_conn_net(cp),
+					      AF_INET, IPPROTO_TCP, &cp->caddr,
 					      0, &cp->vaddr, port, &p);
 			n_cp = ip_vs_conn_new(&p, &from, port,
 					      IP_VS_CONN_F_NO_CPORT |
@@ -257,8 +260,9 @@ static int ip_vs_ftp_out(struct ip_vs_app *app, struct ip_vs_conn *cp,
 		 * would be adjusted twice.
 		 */
 
+		net = skb_net(skb);
 		cp->app_data = NULL;
-		ip_vs_tcp_conn_listen(n_cp);
+		ip_vs_tcp_conn_listen(net, n_cp);
 		ip_vs_conn_put(n_cp);
 		return ret;
 	}
@@ -287,6 +291,7 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
 	union nf_inet_addr to;
 	__be16 port;
 	struct ip_vs_conn *n_cp;
+	struct net *net;
 
 #ifdef CONFIG_IP_VS_IPV6
 	/* This application helper doesn't work with IPv6 yet,
@@ -358,9 +363,9 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
 
 	{
 		struct ip_vs_conn_param p;
-		ip_vs_conn_fill_param(AF_INET, iph->protocol, &to, port,
-				      &cp->vaddr, htons(ntohs(cp->vport)-1),
-				      &p);
+		ip_vs_conn_fill_param(ip_vs_conn_net(cp), AF_INET,
+				      iph->protocol, &to, port, &cp->vaddr,
+				      htons(ntohs(cp->vport)-1), &p);
 		n_cp = ip_vs_conn_in_get(&p);
 		if (!n_cp) {
 			n_cp = ip_vs_conn_new(&p, &cp->daddr,
@@ -378,7 +383,8 @@ static int ip_vs_ftp_in(struct ip_vs_app *app, struct ip_vs_conn *cp,
 	/*
 	 *	Move tunnel to listen state
 	 */
-	ip_vs_tcp_conn_listen(n_cp);
+	net = skb_net(skb);
+	ip_vs_tcp_conn_listen(net, n_cp);
 	ip_vs_conn_put(n_cp);
 
 	return 1;
@@ -399,23 +405,22 @@ static struct ip_vs_app ip_vs_ftp = {
 	.pkt_in =	ip_vs_ftp_in,
 };
 
-
 /*
- *	ip_vs_ftp initialization
+ *	per netns ip_vs_ftp initialization
  */
-static int __init ip_vs_ftp_init(void)
+static int __net_init __ip_vs_ftp_init(struct net *net)
 {
 	int i, ret;
 	struct ip_vs_app *app = &ip_vs_ftp;
 
-	ret = register_ip_vs_app(app);
+	ret = register_ip_vs_app(net, app);
 	if (ret)
 		return ret;
 
 	for (i=0; i<IP_VS_APP_MAX_PORTS; i++) {
 		if (!ports[i])
 			continue;
-		ret = register_ip_vs_app_inc(app, app->protocol, ports[i]);
+		ret = register_ip_vs_app_inc(net, app, app->protocol, ports[i]);
 		if (ret)
 			break;
 		pr_info("%s: loaded support on port[%d] = %d\n",
@@ -423,18 +428,39 @@ static int __init ip_vs_ftp_init(void)
 	}
 
 	if (ret)
-		unregister_ip_vs_app(app);
+		unregister_ip_vs_app(net, app);
 
 	return ret;
 }
+/*
+ *	netns exit
+ */
+static void __ip_vs_ftp_exit(struct net *net)
+{
+	struct ip_vs_app *app = &ip_vs_ftp;
+
+	unregister_ip_vs_app(net, app);
+}
+
+static struct pernet_operations ip_vs_ftp_ops = {
+	.init = __ip_vs_ftp_init,
+	.exit = __ip_vs_ftp_exit,
+};
 
+int __init ip_vs_ftp_init(void)
+{
+	int rv;
+
+	rv = register_pernet_subsys(&ip_vs_ftp_ops);
+	return rv;
+}
 
 /*
  *	ip_vs_ftp finish.
  */
 static void __exit ip_vs_ftp_exit(void)
 {
-	unregister_ip_vs_app(&ip_vs_ftp);
+	unregister_pernet_subsys(&ip_vs_ftp_ops);
 }
 
 
diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c
index 9323f894419..d5bec337187 100644
--- a/net/netfilter/ipvs/ip_vs_lblc.c
+++ b/net/netfilter/ipvs/ip_vs_lblc.c
@@ -70,7 +70,6 @@
  *    entries that haven't been touched for a day.
  */
 #define COUNT_FOR_FULL_EXPIRATION   30
-static int sysctl_ip_vs_lblc_expiration = 24*60*60*HZ;
 
 
 /*
@@ -117,7 +116,7 @@ struct ip_vs_lblc_table {
 static ctl_table vs_vars_table[] = {
 	{
 		.procname	= "lblc_expiration",
-		.data		= &sysctl_ip_vs_lblc_expiration,
+		.data		= NULL,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
@@ -125,8 +124,6 @@ static ctl_table vs_vars_table[] = {
 	{ }
 };
 
-static struct ctl_table_header * sysctl_header;
-
 static inline void ip_vs_lblc_free(struct ip_vs_lblc_entry *en)
 {
 	list_del(&en->list);
@@ -248,6 +245,7 @@ static inline void ip_vs_lblc_full_check(struct ip_vs_service *svc)
 	struct ip_vs_lblc_entry *en, *nxt;
 	unsigned long now = jiffies;
 	int i, j;
+	struct netns_ipvs *ipvs = net_ipvs(svc->net);
 
 	for (i=0, j=tbl->rover; i<IP_VS_LBLC_TAB_SIZE; i++) {
 		j = (j + 1) & IP_VS_LBLC_TAB_MASK;
@@ -255,7 +253,8 @@ static inline void ip_vs_lblc_full_check(struct ip_vs_service *svc)
 		write_lock(&svc->sched_lock);
 		list_for_each_entry_safe(en, nxt, &tbl->bucket[j], list) {
 			if (time_before(now,
-					en->lastuse + sysctl_ip_vs_lblc_expiration))
+					en->lastuse +
+					ipvs->sysctl_lblc_expiration))
 				continue;
 
 			ip_vs_lblc_free(en);
@@ -543,23 +542,73 @@ static struct ip_vs_scheduler ip_vs_lblc_scheduler =
 	.schedule =		ip_vs_lblc_schedule,
 };
 
+/*
+ *  per netns init.
+ */
+static int __net_init __ip_vs_lblc_init(struct net *net)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	if (!net_eq(net, &init_net)) {
+		ipvs->lblc_ctl_table = kmemdup(vs_vars_table,
+						sizeof(vs_vars_table),
+						GFP_KERNEL);
+		if (ipvs->lblc_ctl_table == NULL)
+			goto err_dup;
+	} else
+		ipvs->lblc_ctl_table = vs_vars_table;
+	ipvs->sysctl_lblc_expiration = 24*60*60*HZ;
+	ipvs->lblc_ctl_table[0].data = &ipvs->sysctl_lblc_expiration;
+
+	ipvs->lblc_ctl_header =
+		register_net_sysctl_table(net, net_vs_ctl_path,
+					  ipvs->lblc_ctl_table);
+	if (!ipvs->lblc_ctl_header)
+		goto err_reg;
+
+	return 0;
+
+err_reg:
+	if (!net_eq(net, &init_net))
+		kfree(ipvs->lblc_ctl_table);
+
+err_dup:
+	return -ENOMEM;
+}
+
+static void __net_exit __ip_vs_lblc_exit(struct net *net)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	unregister_net_sysctl_table(ipvs->lblc_ctl_header);
+
+	if (!net_eq(net, &init_net))
+		kfree(ipvs->lblc_ctl_table);
+}
+
+static struct pernet_operations ip_vs_lblc_ops = {
+	.init = __ip_vs_lblc_init,
+	.exit = __ip_vs_lblc_exit,
+};
 
 static int __init ip_vs_lblc_init(void)
 {
 	int ret;
 
-	sysctl_header = register_sysctl_paths(net_vs_ctl_path, vs_vars_table);
+	ret = register_pernet_subsys(&ip_vs_lblc_ops);
+	if (ret)
+		return ret;
+
 	ret = register_ip_vs_scheduler(&ip_vs_lblc_scheduler);
 	if (ret)
-		unregister_sysctl_table(sysctl_header);
+		unregister_pernet_subsys(&ip_vs_lblc_ops);
 	return ret;
 }
 
-
 static void __exit ip_vs_lblc_cleanup(void)
 {
-	unregister_sysctl_table(sysctl_header);
 	unregister_ip_vs_scheduler(&ip_vs_lblc_scheduler);
+	unregister_pernet_subsys(&ip_vs_lblc_ops);
 }
 
 
diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c
index dbeed8ea421..61ae8cfcf0b 100644
--- a/net/netfilter/ipvs/ip_vs_lblcr.c
+++ b/net/netfilter/ipvs/ip_vs_lblcr.c
@@ -70,8 +70,6 @@
  *    entries that haven't been touched for a day.
  */
 #define COUNT_FOR_FULL_EXPIRATION   30
-static int sysctl_ip_vs_lblcr_expiration = 24*60*60*HZ;
-
 
 /*
  *     for IPVS lblcr entry hash table
@@ -296,7 +294,7 @@ struct ip_vs_lblcr_table {
 static ctl_table vs_vars_table[] = {
 	{
 		.procname	= "lblcr_expiration",
-		.data		= &sysctl_ip_vs_lblcr_expiration,
+		.data		= NULL,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_jiffies,
@@ -304,8 +302,6 @@ static ctl_table vs_vars_table[] = {
 	{ }
 };
 
-static struct ctl_table_header * sysctl_header;
-
 static inline void ip_vs_lblcr_free(struct ip_vs_lblcr_entry *en)
 {
 	list_del(&en->list);
@@ -425,14 +421,15 @@ static inline void ip_vs_lblcr_full_check(struct ip_vs_service *svc)
 	unsigned long now = jiffies;
 	int i, j;
 	struct ip_vs_lblcr_entry *en, *nxt;
+	struct netns_ipvs *ipvs = net_ipvs(svc->net);
 
 	for (i=0, j=tbl->rover; i<IP_VS_LBLCR_TAB_SIZE; i++) {
 		j = (j + 1) & IP_VS_LBLCR_TAB_MASK;
 
 		write_lock(&svc->sched_lock);
 		list_for_each_entry_safe(en, nxt, &tbl->bucket[j], list) {
-			if (time_after(en->lastuse+sysctl_ip_vs_lblcr_expiration,
-				       now))
+			if (time_after(en->lastuse
+					+ ipvs->sysctl_lblcr_expiration, now))
 				continue;
 
 			ip_vs_lblcr_free(en);
@@ -664,6 +661,7 @@ ip_vs_lblcr_schedule(struct ip_vs_service *svc, const struct sk_buff *skb)
 	read_lock(&svc->sched_lock);
 	en = ip_vs_lblcr_get(svc->af, tbl, &iph.daddr);
 	if (en) {
+		struct netns_ipvs *ipvs = net_ipvs(svc->net);
 		/* We only hold a read lock, but this is atomic */
 		en->lastuse = jiffies;
 
@@ -675,7 +673,7 @@ ip_vs_lblcr_schedule(struct ip_vs_service *svc, const struct sk_buff *skb)
 		/* More than one destination + enough time passed by, cleanup */
 		if (atomic_read(&en->set.size) > 1 &&
 				time_after(jiffies, en->set.lastmod +
-				sysctl_ip_vs_lblcr_expiration)) {
+				ipvs->sysctl_lblcr_expiration)) {
 			struct ip_vs_dest *m;
 
 			write_lock(&en->set.lock);
@@ -744,23 +742,73 @@ static struct ip_vs_scheduler ip_vs_lblcr_scheduler =
 	.schedule =		ip_vs_lblcr_schedule,
 };
 
+/*
+ *  per netns init.
+ */
+static int __net_init __ip_vs_lblcr_init(struct net *net)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	if (!net_eq(net, &init_net)) {
+		ipvs->lblcr_ctl_table = kmemdup(vs_vars_table,
+						sizeof(vs_vars_table),
+						GFP_KERNEL);
+		if (ipvs->lblcr_ctl_table == NULL)
+			goto err_dup;
+	} else
+		ipvs->lblcr_ctl_table = vs_vars_table;
+	ipvs->sysctl_lblcr_expiration = 24*60*60*HZ;
+	ipvs->lblcr_ctl_table[0].data = &ipvs->sysctl_lblcr_expiration;
+
+	ipvs->lblcr_ctl_header =
+		register_net_sysctl_table(net, net_vs_ctl_path,
+					  ipvs->lblcr_ctl_table);
+	if (!ipvs->lblcr_ctl_header)
+		goto err_reg;
+
+	return 0;
+
+err_reg:
+	if (!net_eq(net, &init_net))
+		kfree(ipvs->lblcr_ctl_table);
+
+err_dup:
+	return -ENOMEM;
+}
+
+static void __net_exit __ip_vs_lblcr_exit(struct net *net)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	unregister_net_sysctl_table(ipvs->lblcr_ctl_header);
+
+	if (!net_eq(net, &init_net))
+		kfree(ipvs->lblcr_ctl_table);
+}
+
+static struct pernet_operations ip_vs_lblcr_ops = {
+	.init = __ip_vs_lblcr_init,
+	.exit = __ip_vs_lblcr_exit,
+};
 
 static int __init ip_vs_lblcr_init(void)
 {
 	int ret;
 
-	sysctl_header = register_sysctl_paths(net_vs_ctl_path, vs_vars_table);
+	ret = register_pernet_subsys(&ip_vs_lblcr_ops);
+	if (ret)
+		return ret;
+
 	ret = register_ip_vs_scheduler(&ip_vs_lblcr_scheduler);
 	if (ret)
-		unregister_sysctl_table(sysctl_header);
+		unregister_pernet_subsys(&ip_vs_lblcr_ops);
 	return ret;
 }
 
-
 static void __exit ip_vs_lblcr_cleanup(void)
 {
-	unregister_sysctl_table(sysctl_header);
 	unregister_ip_vs_scheduler(&ip_vs_lblcr_scheduler);
+	unregister_pernet_subsys(&ip_vs_lblcr_ops);
 }
 
 
diff --git a/net/netfilter/ipvs/ip_vs_nfct.c b/net/netfilter/ipvs/ip_vs_nfct.c
index 4680647cd45..f454c80df0a 100644
--- a/net/netfilter/ipvs/ip_vs_nfct.c
+++ b/net/netfilter/ipvs/ip_vs_nfct.c
@@ -141,6 +141,7 @@ static void ip_vs_nfct_expect_callback(struct nf_conn *ct,
 	struct nf_conntrack_tuple *orig, new_reply;
 	struct ip_vs_conn *cp;
 	struct ip_vs_conn_param p;
+	struct net *net = nf_ct_net(ct);
 
 	if (exp->tuple.src.l3num != PF_INET)
 		return;
@@ -155,7 +156,7 @@ static void ip_vs_nfct_expect_callback(struct nf_conn *ct,
 
 	/* RS->CLIENT */
 	orig = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-	ip_vs_conn_fill_param(exp->tuple.src.l3num, orig->dst.protonum,
+	ip_vs_conn_fill_param(net, exp->tuple.src.l3num, orig->dst.protonum,
 			      &orig->src.u3, orig->src.u.tcp.port,
 			      &orig->dst.u3, orig->dst.u.tcp.port, &p);
 	cp = ip_vs_conn_out_get(&p);
@@ -268,7 +269,8 @@ void ip_vs_conn_drop_conntrack(struct ip_vs_conn *cp)
 		" for conn " FMT_CONN "\n",
 		__func__, ARG_TUPLE(&tuple), ARG_CONN(cp));
 
-	h = nf_conntrack_find_get(&init_net, NF_CT_DEFAULT_ZONE, &tuple);
+	h = nf_conntrack_find_get(ip_vs_conn_net(cp), NF_CT_DEFAULT_ZONE,
+				  &tuple);
 	if (h) {
 		ct = nf_ct_tuplehash_to_ctrack(h);
 		/* Show what happens instead of calling nf_ct_kill() */
diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c
index c5399839087..6ac986cdcff 100644
--- a/net/netfilter/ipvs/ip_vs_proto.c
+++ b/net/netfilter/ipvs/ip_vs_proto.c
@@ -60,6 +60,31 @@ static int __used __init register_ip_vs_protocol(struct ip_vs_protocol *pp)
 	return 0;
 }
 
+/*
+ *	register an ipvs protocols netns related data
+ */
+static int
+register_ip_vs_proto_netns(struct net *net, struct ip_vs_protocol *pp)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+	unsigned hash = IP_VS_PROTO_HASH(pp->protocol);
+	struct ip_vs_proto_data *pd =
+			kzalloc(sizeof(struct ip_vs_proto_data), GFP_ATOMIC);
+
+	if (!pd) {
+		pr_err("%s(): no memory.\n", __func__);
+		return -ENOMEM;
+	}
+	pd->pp = pp;	/* For speed issues */
+	pd->next = ipvs->proto_data_table[hash];
+	ipvs->proto_data_table[hash] = pd;
+	atomic_set(&pd->appcnt, 0);	/* Init app counter */
+
+	if (pp->init_netns != NULL)
+		pp->init_netns(net, pd);
+
+	return 0;
+}
 
 /*
  *	unregister an ipvs protocol
@@ -82,6 +107,29 @@ static int unregister_ip_vs_protocol(struct ip_vs_protocol *pp)
 	return -ESRCH;
 }
 
+/*
+ *	unregister an ipvs protocols netns data
+ */
+static int
+unregister_ip_vs_proto_netns(struct net *net, struct ip_vs_proto_data *pd)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+	struct ip_vs_proto_data **pd_p;
+	unsigned hash = IP_VS_PROTO_HASH(pd->pp->protocol);
+
+	pd_p = &ipvs->proto_data_table[hash];
+	for (; *pd_p; pd_p = &(*pd_p)->next) {
+		if (*pd_p == pd) {
+			*pd_p = pd->next;
+			if (pd->pp->exit_netns != NULL)
+				pd->pp->exit_netns(net, pd);
+			kfree(pd);
+			return 0;
+		}
+	}
+
+	return -ESRCH;
+}
 
 /*
  *	get ip_vs_protocol object by its proto.
@@ -100,19 +148,44 @@ struct ip_vs_protocol * ip_vs_proto_get(unsigned short proto)
 }
 EXPORT_SYMBOL(ip_vs_proto_get);
 
+/*
+ *	get ip_vs_protocol object data by netns and proto
+ */
+struct ip_vs_proto_data *
+__ipvs_proto_data_get(struct netns_ipvs *ipvs, unsigned short proto)
+{
+	struct ip_vs_proto_data *pd;
+	unsigned hash = IP_VS_PROTO_HASH(proto);
+
+	for (pd = ipvs->proto_data_table[hash]; pd; pd = pd->next) {
+		if (pd->pp->protocol == proto)
+			return pd;
+	}
+
+	return NULL;
+}
+
+struct ip_vs_proto_data *
+ip_vs_proto_data_get(struct net *net, unsigned short proto)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	return __ipvs_proto_data_get(ipvs, proto);
+}
+EXPORT_SYMBOL(ip_vs_proto_data_get);
 
 /*
  *	Propagate event for state change to all protocols
  */
-void ip_vs_protocol_timeout_change(int flags)
+void ip_vs_protocol_timeout_change(struct netns_ipvs *ipvs, int flags)
 {
-	struct ip_vs_protocol *pp;
+	struct ip_vs_proto_data *pd;
 	int i;
 
 	for (i = 0; i < IP_VS_PROTO_TAB_SIZE; i++) {
-		for (pp = ip_vs_proto_table[i]; pp; pp = pp->next) {
-			if (pp->timeout_change)
-				pp->timeout_change(pp, flags);
+		for (pd = ipvs->proto_data_table[i]; pd; pd = pd->next) {
+			if (pd->pp->timeout_change)
+				pd->pp->timeout_change(pd, flags);
 		}
 	}
 }
@@ -236,6 +309,46 @@ ip_vs_tcpudp_debug_packet(int af, struct ip_vs_protocol *pp,
 		ip_vs_tcpudp_debug_packet_v4(pp, skb, offset, msg);
 }
 
+/*
+ * per network name-space init
+ */
+static int __net_init __ip_vs_protocol_init(struct net *net)
+{
+#ifdef CONFIG_IP_VS_PROTO_TCP
+	register_ip_vs_proto_netns(net, &ip_vs_protocol_tcp);
+#endif
+#ifdef CONFIG_IP_VS_PROTO_UDP
+	register_ip_vs_proto_netns(net, &ip_vs_protocol_udp);
+#endif
+#ifdef CONFIG_IP_VS_PROTO_SCTP
+	register_ip_vs_proto_netns(net, &ip_vs_protocol_sctp);
+#endif
+#ifdef CONFIG_IP_VS_PROTO_AH
+	register_ip_vs_proto_netns(net, &ip_vs_protocol_ah);
+#endif
+#ifdef CONFIG_IP_VS_PROTO_ESP
+	register_ip_vs_proto_netns(net, &ip_vs_protocol_esp);
+#endif
+	return 0;
+}
+
+static void __net_exit __ip_vs_protocol_cleanup(struct net *net)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+	struct ip_vs_proto_data *pd;
+	int i;
+
+	/* unregister all the ipvs proto data for this netns */
+	for (i = 0; i < IP_VS_PROTO_TAB_SIZE; i++) {
+		while ((pd = ipvs->proto_data_table[i]) != NULL)
+			unregister_ip_vs_proto_netns(net, pd);
+	}
+}
+
+static struct pernet_operations ipvs_proto_ops = {
+	.init = __ip_vs_protocol_init,
+	.exit = __ip_vs_protocol_cleanup,
+};
 
 int __init ip_vs_protocol_init(void)
 {
@@ -265,6 +378,7 @@ int __init ip_vs_protocol_init(void)
 	REGISTER_PROTOCOL(&ip_vs_protocol_esp);
 #endif
 	pr_info("Registered protocols (%s)\n", &protocols[2]);
+	return register_pernet_subsys(&ipvs_proto_ops);
 
 	return 0;
 }
@@ -275,6 +389,7 @@ void ip_vs_protocol_cleanup(void)
 	struct ip_vs_protocol *pp;
 	int i;
 
+	unregister_pernet_subsys(&ipvs_proto_ops);
 	/* unregister all the ipvs protocols */
 	for (i = 0; i < IP_VS_PROTO_TAB_SIZE; i++) {
 		while ((pp = ip_vs_proto_table[i]) != NULL)
diff --git a/net/netfilter/ipvs/ip_vs_proto_ah_esp.c b/net/netfilter/ipvs/ip_vs_proto_ah_esp.c
index 3a0461117d3..5b8eb8b12c3 100644
--- a/net/netfilter/ipvs/ip_vs_proto_ah_esp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_ah_esp.c
@@ -41,28 +41,30 @@ struct isakmp_hdr {
 #define PORT_ISAKMP	500
 
 static void
-ah_esp_conn_fill_param_proto(int af, const struct ip_vs_iphdr *iph,
-			     int inverse, struct ip_vs_conn_param *p)
+ah_esp_conn_fill_param_proto(struct net *net, int af,
+			     const struct ip_vs_iphdr *iph, int inverse,
+			     struct ip_vs_conn_param *p)
 {
 	if (likely(!inverse))
-		ip_vs_conn_fill_param(af, IPPROTO_UDP,
+		ip_vs_conn_fill_param(net, af, IPPROTO_UDP,
 				      &iph->saddr, htons(PORT_ISAKMP),
 				      &iph->daddr, htons(PORT_ISAKMP), p);
 	else
-		ip_vs_conn_fill_param(af, IPPROTO_UDP,
+		ip_vs_conn_fill_param(net, af, IPPROTO_UDP,
 				      &iph->daddr, htons(PORT_ISAKMP),
 				      &iph->saddr, htons(PORT_ISAKMP), p);
 }
 
 static struct ip_vs_conn *
-ah_esp_conn_in_get(int af, const struct sk_buff *skb, struct ip_vs_protocol *pp,
+ah_esp_conn_in_get(int af, const struct sk_buff *skb,
 		   const struct ip_vs_iphdr *iph, unsigned int proto_off,
 		   int inverse)
 {
 	struct ip_vs_conn *cp;
 	struct ip_vs_conn_param p;
+	struct net *net = skb_net(skb);
 
-	ah_esp_conn_fill_param_proto(af, iph, inverse, &p);
+	ah_esp_conn_fill_param_proto(net, af, iph, inverse, &p);
 	cp = ip_vs_conn_in_get(&p);
 	if (!cp) {
 		/*
@@ -72,7 +74,7 @@ ah_esp_conn_in_get(int af, const struct sk_buff *skb, struct ip_vs_protocol *pp,
 		IP_VS_DBG_BUF(12, "Unknown ISAKMP entry for outin packet "
 			      "%s%s %s->%s\n",
 			      inverse ? "ICMP+" : "",
-			      pp->name,
+			      ip_vs_proto_get(iph->protocol)->name,
 			      IP_VS_DBG_ADDR(af, &iph->saddr),
 			      IP_VS_DBG_ADDR(af, &iph->daddr));
 	}
@@ -83,21 +85,21 @@ ah_esp_conn_in_get(int af, const struct sk_buff *skb, struct ip_vs_protocol *pp,
 
 static struct ip_vs_conn *
 ah_esp_conn_out_get(int af, const struct sk_buff *skb,
-		    struct ip_vs_protocol *pp,
 		    const struct ip_vs_iphdr *iph,
 		    unsigned int proto_off,
 		    int inverse)
 {
 	struct ip_vs_conn *cp;
 	struct ip_vs_conn_param p;
+	struct net *net = skb_net(skb);
 
-	ah_esp_conn_fill_param_proto(af, iph, inverse, &p);
+	ah_esp_conn_fill_param_proto(net, af, iph, inverse, &p);
 	cp = ip_vs_conn_out_get(&p);
 	if (!cp) {
 		IP_VS_DBG_BUF(12, "Unknown ISAKMP entry for inout packet "
 			      "%s%s %s->%s\n",
 			      inverse ? "ICMP+" : "",
-			      pp->name,
+			      ip_vs_proto_get(iph->protocol)->name,
 			      IP_VS_DBG_ADDR(af, &iph->saddr),
 			      IP_VS_DBG_ADDR(af, &iph->daddr));
 	}
@@ -107,7 +109,7 @@ ah_esp_conn_out_get(int af, const struct sk_buff *skb,
 
 
 static int
-ah_esp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
+ah_esp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_proto_data *pd,
 		     int *verdict, struct ip_vs_conn **cpp)
 {
 	/*
@@ -117,26 +119,14 @@ ah_esp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
 	return 0;
 }
 
-static void ah_esp_init(struct ip_vs_protocol *pp)
-{
-	/* nothing to do now */
-}
-
-
-static void ah_esp_exit(struct ip_vs_protocol *pp)
-{
-	/* nothing to do now */
-}
-
-
 #ifdef CONFIG_IP_VS_PROTO_AH
 struct ip_vs_protocol ip_vs_protocol_ah = {
 	.name =			"AH",
 	.protocol =		IPPROTO_AH,
 	.num_states =		1,
 	.dont_defrag =		1,
-	.init =			ah_esp_init,
-	.exit =			ah_esp_exit,
+	.init =			NULL,
+	.exit =			NULL,
 	.conn_schedule =	ah_esp_conn_schedule,
 	.conn_in_get =		ah_esp_conn_in_get,
 	.conn_out_get =		ah_esp_conn_out_get,
@@ -149,7 +139,6 @@ struct ip_vs_protocol ip_vs_protocol_ah = {
 	.app_conn_bind =	NULL,
 	.debug_packet =		ip_vs_tcpudp_debug_packet,
 	.timeout_change =	NULL,		/* ISAKMP */
-	.set_state_timeout =	NULL,
 };
 #endif
 
@@ -159,8 +148,8 @@ struct ip_vs_protocol ip_vs_protocol_esp = {
 	.protocol =		IPPROTO_ESP,
 	.num_states =		1,
 	.dont_defrag =		1,
-	.init =			ah_esp_init,
-	.exit =			ah_esp_exit,
+	.init =			NULL,
+	.exit =			NULL,
 	.conn_schedule =	ah_esp_conn_schedule,
 	.conn_in_get =		ah_esp_conn_in_get,
 	.conn_out_get =		ah_esp_conn_out_get,
diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c
index a315159983a..fb2d04ac5d4 100644
--- a/net/netfilter/ipvs/ip_vs_proto_sctp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c
@@ -9,9 +9,10 @@
 #include <net/ip_vs.h>
 
 static int
-sctp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
+sctp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_proto_data *pd,
 		   int *verdict, struct ip_vs_conn **cpp)
 {
+	struct net *net;
 	struct ip_vs_service *svc;
 	sctp_chunkhdr_t _schunkh, *sch;
 	sctp_sctphdr_t *sh, _sctph;
@@ -27,13 +28,13 @@ sctp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
 				 sizeof(_schunkh), &_schunkh);
 	if (sch == NULL)
 		return 0;
-
+	net = skb_net(skb);
 	if ((sch->type == SCTP_CID_INIT) &&
-	    (svc = ip_vs_service_get(af, skb->mark, iph.protocol,
+	    (svc = ip_vs_service_get(net, af, skb->mark, iph.protocol,
 				     &iph.daddr, sh->dest))) {
 		int ignored;
 
-		if (ip_vs_todrop()) {
+		if (ip_vs_todrop(net_ipvs(net))) {
 			/*
 			 * It seems that we are very loaded.
 			 * We have to drop this packet :(
@@ -46,10 +47,10 @@ sctp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
 		 * Let the virtual server select a real server for the
 		 * incoming connection, and create a connection entry.
 		 */
-		*cpp = ip_vs_schedule(svc, skb, pp, &ignored);
+		*cpp = ip_vs_schedule(svc, skb, pd, &ignored);
 		if (!*cpp && ignored <= 0) {
 			if (!ignored)
-				*verdict = ip_vs_leave(svc, skb, pp);
+				*verdict = ip_vs_leave(svc, skb, pd);
 			else {
 				ip_vs_service_put(svc);
 				*verdict = NF_DROP;
@@ -861,7 +862,7 @@ static struct ipvs_sctp_nextstate
 /*
  *      Timeout table[state]
  */
-static int sctp_timeouts[IP_VS_SCTP_S_LAST + 1] = {
+static const int sctp_timeouts[IP_VS_SCTP_S_LAST + 1] = {
 	[IP_VS_SCTP_S_NONE]         =     2 * HZ,
 	[IP_VS_SCTP_S_INIT_CLI]     =     1 * 60 * HZ,
 	[IP_VS_SCTP_S_INIT_SER]     =     1 * 60 * HZ,
@@ -905,20 +906,8 @@ static const char *sctp_state_name(int state)
 	return "?";
 }
 
-static void sctp_timeout_change(struct ip_vs_protocol *pp, int flags)
-{
-}
-
-static int
-sctp_set_state_timeout(struct ip_vs_protocol *pp, char *sname, int to)
-{
-
-return ip_vs_set_state_timeout(pp->timeout_table, IP_VS_SCTP_S_LAST,
-				sctp_state_name_table, sname, to);
-}
-
 static inline int
-set_sctp_state(struct ip_vs_protocol *pp, struct ip_vs_conn *cp,
+set_sctp_state(struct ip_vs_proto_data *pd, struct ip_vs_conn *cp,
 		int direction, const struct sk_buff *skb)
 {
 	sctp_chunkhdr_t _sctpch, *sch;
@@ -976,7 +965,7 @@ set_sctp_state(struct ip_vs_protocol *pp, struct ip_vs_conn *cp,
 
 		IP_VS_DBG_BUF(8, "%s %s  %s:%d->"
 				"%s:%d state: %s->%s conn->refcnt:%d\n",
-				pp->name,
+				pd->pp->name,
 				((direction == IP_VS_DIR_OUTPUT) ?
 				 "output " : "input "),
 				IP_VS_DBG_ADDR(cp->af, &cp->daddr),
@@ -1000,75 +989,73 @@ set_sctp_state(struct ip_vs_protocol *pp, struct ip_vs_conn *cp,
 			}
 		}
 	}
+	if (likely(pd))
+		cp->timeout = pd->timeout_table[cp->state = next_state];
+	else	/* What to do ? */
+		cp->timeout = sctp_timeouts[cp->state = next_state];
 
-	 cp->timeout = pp->timeout_table[cp->state = next_state];
-
-	 return 1;
+	return 1;
 }
 
 static int
 sctp_state_transition(struct ip_vs_conn *cp, int direction,
-		const struct sk_buff *skb, struct ip_vs_protocol *pp)
+		const struct sk_buff *skb, struct ip_vs_proto_data *pd)
 {
 	int ret = 0;
 
 	spin_lock(&cp->lock);
-	ret = set_sctp_state(pp, cp, direction, skb);
+	ret = set_sctp_state(pd, cp, direction, skb);
 	spin_unlock(&cp->lock);
 
 	return ret;
 }
 
-/*
- *      Hash table for SCTP application incarnations
- */
-#define SCTP_APP_TAB_BITS        4
-#define SCTP_APP_TAB_SIZE        (1 << SCTP_APP_TAB_BITS)
-#define SCTP_APP_TAB_MASK        (SCTP_APP_TAB_SIZE - 1)
-
-static struct list_head sctp_apps[SCTP_APP_TAB_SIZE];
-static DEFINE_SPINLOCK(sctp_app_lock);
-
 static inline __u16 sctp_app_hashkey(__be16 port)
 {
 	return (((__force u16)port >> SCTP_APP_TAB_BITS) ^ (__force u16)port)
 		& SCTP_APP_TAB_MASK;
 }
 
-static int sctp_register_app(struct ip_vs_app *inc)
+static int sctp_register_app(struct net *net, struct ip_vs_app *inc)
 {
 	struct ip_vs_app *i;
 	__u16 hash;
 	__be16 port = inc->port;
 	int ret = 0;
+	struct netns_ipvs *ipvs = net_ipvs(net);
+	struct ip_vs_proto_data *pd = ip_vs_proto_data_get(net, IPPROTO_SCTP);
 
 	hash = sctp_app_hashkey(port);
 
-	spin_lock_bh(&sctp_app_lock);
-	list_for_each_entry(i, &sctp_apps[hash], p_list) {
+	spin_lock_bh(&ipvs->sctp_app_lock);
+	list_for_each_entry(i, &ipvs->sctp_apps[hash], p_list) {
 		if (i->port == port) {
 			ret = -EEXIST;
 			goto out;
 		}
 	}
-	list_add(&inc->p_list, &sctp_apps[hash]);
-	atomic_inc(&ip_vs_protocol_sctp.appcnt);
+	list_add(&inc->p_list, &ipvs->sctp_apps[hash]);
+	atomic_inc(&pd->appcnt);
 out:
-	spin_unlock_bh(&sctp_app_lock);
+	spin_unlock_bh(&ipvs->sctp_app_lock);
 
 	return ret;
 }
 
-static void sctp_unregister_app(struct ip_vs_app *inc)
+static void sctp_unregister_app(struct net *net, struct ip_vs_app *inc)
 {
-	spin_lock_bh(&sctp_app_lock);
-	atomic_dec(&ip_vs_protocol_sctp.appcnt);
+	struct netns_ipvs *ipvs = net_ipvs(net);
+	struct ip_vs_proto_data *pd = ip_vs_proto_data_get(net, IPPROTO_SCTP);
+
+	spin_lock_bh(&ipvs->sctp_app_lock);
+	atomic_dec(&pd->appcnt);
 	list_del(&inc->p_list);
-	spin_unlock_bh(&sctp_app_lock);
+	spin_unlock_bh(&ipvs->sctp_app_lock);
 }
 
 static int sctp_app_conn_bind(struct ip_vs_conn *cp)
 {
+	struct netns_ipvs *ipvs = net_ipvs(ip_vs_conn_net(cp));
 	int hash;
 	struct ip_vs_app *inc;
 	int result = 0;
@@ -1079,12 +1066,12 @@ static int sctp_app_conn_bind(struct ip_vs_conn *cp)
 	/* Lookup application incarnations and bind the right one */
 	hash = sctp_app_hashkey(cp->vport);
 
-	spin_lock(&sctp_app_lock);
-	list_for_each_entry(inc, &sctp_apps[hash], p_list) {
+	spin_lock(&ipvs->sctp_app_lock);
+	list_for_each_entry(inc, &ipvs->sctp_apps[hash], p_list) {
 		if (inc->port == cp->vport) {
 			if (unlikely(!ip_vs_app_inc_get(inc)))
 				break;
-			spin_unlock(&sctp_app_lock);
+			spin_unlock(&ipvs->sctp_app_lock);
 
 			IP_VS_DBG_BUF(9, "%s: Binding conn %s:%u->"
 					"%s:%u to app %s on port %u\n",
@@ -1100,43 +1087,50 @@ static int sctp_app_conn_bind(struct ip_vs_conn *cp)
 			goto out;
 		}
 	}
-	spin_unlock(&sctp_app_lock);
+	spin_unlock(&ipvs->sctp_app_lock);
 out:
 	return result;
 }
 
-static void ip_vs_sctp_init(struct ip_vs_protocol *pp)
+/* ---------------------------------------------
+ *   timeouts is netns related now.
+ * ---------------------------------------------
+ */
+static void __ip_vs_sctp_init(struct net *net, struct ip_vs_proto_data *pd)
 {
-	IP_VS_INIT_HASH_TABLE(sctp_apps);
-	pp->timeout_table = sctp_timeouts;
-}
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
+	ip_vs_init_hash_table(ipvs->sctp_apps, SCTP_APP_TAB_SIZE);
+	spin_lock_init(&ipvs->tcp_app_lock);
+	pd->timeout_table = ip_vs_create_timeout_table((int *)sctp_timeouts,
+							sizeof(sctp_timeouts));
+}
 
-static void ip_vs_sctp_exit(struct ip_vs_protocol *pp)
+static void __ip_vs_sctp_exit(struct net *net, struct ip_vs_proto_data *pd)
 {
-
+	kfree(pd->timeout_table);
 }
 
 struct ip_vs_protocol ip_vs_protocol_sctp = {
-	.name = "SCTP",
-	.protocol = IPPROTO_SCTP,
-	.num_states = IP_VS_SCTP_S_LAST,
-	.dont_defrag = 0,
-	.appcnt = ATOMIC_INIT(0),
-	.init = ip_vs_sctp_init,
-	.exit = ip_vs_sctp_exit,
-	.register_app = sctp_register_app,
+	.name		= "SCTP",
+	.protocol	= IPPROTO_SCTP,
+	.num_states	= IP_VS_SCTP_S_LAST,
+	.dont_defrag	= 0,
+	.init		= NULL,
+	.exit		= NULL,
+	.init_netns	= __ip_vs_sctp_init,
+	.exit_netns	= __ip_vs_sctp_exit,
+	.register_app	= sctp_register_app,
 	.unregister_app = sctp_unregister_app,
-	.conn_schedule = sctp_conn_schedule,
-	.conn_in_get = ip_vs_conn_in_get_proto,
-	.conn_out_get = ip_vs_conn_out_get_proto,
-	.snat_handler = sctp_snat_handler,
-	.dnat_handler = sctp_dnat_handler,
-	.csum_check = sctp_csum_check,
-	.state_name = sctp_state_name,
+	.conn_schedule	= sctp_conn_schedule,
+	.conn_in_get	= ip_vs_conn_in_get_proto,
+	.conn_out_get	= ip_vs_conn_out_get_proto,
+	.snat_handler	= sctp_snat_handler,
+	.dnat_handler	= sctp_dnat_handler,
+	.csum_check	= sctp_csum_check,
+	.state_name	= sctp_state_name,
 	.state_transition = sctp_state_transition,
-	.app_conn_bind = sctp_app_conn_bind,
-	.debug_packet = ip_vs_tcpudp_debug_packet,
-	.timeout_change = sctp_timeout_change,
-	.set_state_timeout = sctp_set_state_timeout,
+	.app_conn_bind	= sctp_app_conn_bind,
+	.debug_packet	= ip_vs_tcpudp_debug_packet,
+	.timeout_change	= NULL,
 };
diff --git a/net/netfilter/ipvs/ip_vs_proto_tcp.c b/net/netfilter/ipvs/ip_vs_proto_tcp.c
index 1cdab12abfe..c0cc341b840 100644
--- a/net/netfilter/ipvs/ip_vs_proto_tcp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_tcp.c
@@ -9,8 +9,12 @@
  *              as published by the Free Software Foundation; either version
  *              2 of the License, or (at your option) any later version.
  *
- * Changes:
+ * Changes:     Hans Schillstrom <hans.schillstrom@ericsson.com>
  *
+ *              Network name space (netns) aware.
+ *              Global data moved to netns i.e struct netns_ipvs
+ *              tcp_timeouts table has copy per netns in a hash table per
+ *              protocol ip_vs_proto_data and is handled by netns
  */
 
 #define KMSG_COMPONENT "IPVS"
@@ -28,9 +32,10 @@
 #include <net/ip_vs.h>
 
 static int
-tcp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
+tcp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_proto_data *pd,
 		  int *verdict, struct ip_vs_conn **cpp)
 {
+	struct net *net;
 	struct ip_vs_service *svc;
 	struct tcphdr _tcph, *th;
 	struct ip_vs_iphdr iph;
@@ -42,14 +47,14 @@ tcp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
 		*verdict = NF_DROP;
 		return 0;
 	}
-
+	net = skb_net(skb);
 	/* No !th->ack check to allow scheduling on SYN+ACK for Active FTP */
 	if (th->syn &&
-	    (svc = ip_vs_service_get(af, skb->mark, iph.protocol, &iph.daddr,
-				     th->dest))) {
+	    (svc = ip_vs_service_get(net, af, skb->mark, iph.protocol,
+				     &iph.daddr, th->dest))) {
 		int ignored;
 
-		if (ip_vs_todrop()) {
+		if (ip_vs_todrop(net_ipvs(net))) {
 			/*
 			 * It seems that we are very loaded.
 			 * We have to drop this packet :(
@@ -63,10 +68,10 @@ tcp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
 		 * Let the virtual server select a real server for the
 		 * incoming connection, and create a connection entry.
 		 */
-		*cpp = ip_vs_schedule(svc, skb, pp, &ignored);
+		*cpp = ip_vs_schedule(svc, skb, pd, &ignored);
 		if (!*cpp && ignored <= 0) {
 			if (!ignored)
-				*verdict = ip_vs_leave(svc, skb, pp);
+				*verdict = ip_vs_leave(svc, skb, pd);
 			else {
 				ip_vs_service_put(svc);
 				*verdict = NF_DROP;
@@ -344,7 +349,7 @@ static const int tcp_state_off[IP_VS_DIR_LAST] = {
 /*
  *	Timeout table[state]
  */
-static int tcp_timeouts[IP_VS_TCP_S_LAST+1] = {
+static const int tcp_timeouts[IP_VS_TCP_S_LAST+1] = {
 	[IP_VS_TCP_S_NONE]		=	2*HZ,
 	[IP_VS_TCP_S_ESTABLISHED]	=	15*60*HZ,
 	[IP_VS_TCP_S_SYN_SENT]		=	2*60*HZ,
@@ -443,10 +448,7 @@ static struct tcp_states_t tcp_states_dos [] = {
 /*rst*/ {{sCL, sCL, sCL, sSR, sCL, sCL, sCL, sCL, sLA, sLI, sCL }},
 };
 
-static struct tcp_states_t *tcp_state_table = tcp_states;
-
-
-static void tcp_timeout_change(struct ip_vs_protocol *pp, int flags)
+static void tcp_timeout_change(struct ip_vs_proto_data *pd, int flags)
 {
 	int on = (flags & 1);		/* secure_tcp */
 
@@ -456,14 +458,7 @@ static void tcp_timeout_change(struct ip_vs_protocol *pp, int flags)
 	** for most if not for all of the applications. Something
 	** like "capabilities" (flags) for each object.
 	*/
-	tcp_state_table = (on? tcp_states_dos : tcp_states);
-}
-
-static int
-tcp_set_state_timeout(struct ip_vs_protocol *pp, char *sname, int to)
-{
-	return ip_vs_set_state_timeout(pp->timeout_table, IP_VS_TCP_S_LAST,
-				       tcp_state_name_table, sname, to);
+	pd->tcp_state_table = (on ? tcp_states_dos : tcp_states);
 }
 
 static inline int tcp_state_idx(struct tcphdr *th)
@@ -480,7 +475,7 @@ static inline int tcp_state_idx(struct tcphdr *th)
 }
 
 static inline void
-set_tcp_state(struct ip_vs_protocol *pp, struct ip_vs_conn *cp,
+set_tcp_state(struct ip_vs_proto_data *pd, struct ip_vs_conn *cp,
 	      int direction, struct tcphdr *th)
 {
 	int state_idx;
@@ -503,7 +498,8 @@ set_tcp_state(struct ip_vs_protocol *pp, struct ip_vs_conn *cp,
 		goto tcp_state_out;
 	}
 
-	new_state = tcp_state_table[state_off+state_idx].next_state[cp->state];
+	new_state =
+		pd->tcp_state_table[state_off+state_idx].next_state[cp->state];
 
   tcp_state_out:
 	if (new_state != cp->state) {
@@ -511,7 +507,7 @@ set_tcp_state(struct ip_vs_protocol *pp, struct ip_vs_conn *cp,
 
 		IP_VS_DBG_BUF(8, "%s %s [%c%c%c%c] %s:%d->"
 			      "%s:%d state: %s->%s conn->refcnt:%d\n",
-			      pp->name,
+			      pd->pp->name,
 			      ((state_off == TCP_DIR_OUTPUT) ?
 			       "output " : "input "),
 			      th->syn ? 'S' : '.',
@@ -541,17 +537,19 @@ set_tcp_state(struct ip_vs_protocol *pp, struct ip_vs_conn *cp,
 		}
 	}
 
-	cp->timeout = pp->timeout_table[cp->state = new_state];
+	if (likely(pd))
+		cp->timeout = pd->timeout_table[cp->state = new_state];
+	else	/* What to do ? */
+		cp->timeout = tcp_timeouts[cp->state = new_state];
 }
 
-
 /*
  *	Handle state transitions
  */
 static int
 tcp_state_transition(struct ip_vs_conn *cp, int direction,
 		     const struct sk_buff *skb,
-		     struct ip_vs_protocol *pp)
+		     struct ip_vs_proto_data *pd)
 {
 	struct tcphdr _tcph, *th;
 
@@ -566,23 +564,12 @@ tcp_state_transition(struct ip_vs_conn *cp, int direction,
 		return 0;
 
 	spin_lock(&cp->lock);
-	set_tcp_state(pp, cp, direction, th);
+	set_tcp_state(pd, cp, direction, th);
 	spin_unlock(&cp->lock);
 
 	return 1;
 }
 
-
-/*
- *	Hash table for TCP application incarnations
- */
-#define	TCP_APP_TAB_BITS	4
-#define	TCP_APP_TAB_SIZE	(1 << TCP_APP_TAB_BITS)
-#define	TCP_APP_TAB_MASK	(TCP_APP_TAB_SIZE - 1)
-
-static struct list_head tcp_apps[TCP_APP_TAB_SIZE];
-static DEFINE_SPINLOCK(tcp_app_lock);
-
 static inline __u16 tcp_app_hashkey(__be16 port)
 {
 	return (((__force u16)port >> TCP_APP_TAB_BITS) ^ (__force u16)port)
@@ -590,44 +577,50 @@ static inline __u16 tcp_app_hashkey(__be16 port)
 }
 
 
-static int tcp_register_app(struct ip_vs_app *inc)
+static int tcp_register_app(struct net *net, struct ip_vs_app *inc)
 {
 	struct ip_vs_app *i;
 	__u16 hash;
 	__be16 port = inc->port;
 	int ret = 0;
+	struct netns_ipvs *ipvs = net_ipvs(net);
+	struct ip_vs_proto_data *pd = ip_vs_proto_data_get(net, IPPROTO_TCP);
 
 	hash = tcp_app_hashkey(port);
 
-	spin_lock_bh(&tcp_app_lock);
-	list_for_each_entry(i, &tcp_apps[hash], p_list) {
+	spin_lock_bh(&ipvs->tcp_app_lock);
+	list_for_each_entry(i, &ipvs->tcp_apps[hash], p_list) {
 		if (i->port == port) {
 			ret = -EEXIST;
 			goto out;
 		}
 	}
-	list_add(&inc->p_list, &tcp_apps[hash]);
-	atomic_inc(&ip_vs_protocol_tcp.appcnt);
+	list_add(&inc->p_list, &ipvs->tcp_apps[hash]);
+	atomic_inc(&pd->appcnt);
 
   out:
-	spin_unlock_bh(&tcp_app_lock);
+	spin_unlock_bh(&ipvs->tcp_app_lock);
 	return ret;
 }
 
 
 static void
-tcp_unregister_app(struct ip_vs_app *inc)
+tcp_unregister_app(struct net *net, struct ip_vs_app *inc)
 {
-	spin_lock_bh(&tcp_app_lock);
-	atomic_dec(&ip_vs_protocol_tcp.appcnt);
+	struct netns_ipvs *ipvs = net_ipvs(net);
+	struct ip_vs_proto_data *pd = ip_vs_proto_data_get(net, IPPROTO_TCP);
+
+	spin_lock_bh(&ipvs->tcp_app_lock);
+	atomic_dec(&pd->appcnt);
 	list_del(&inc->p_list);
-	spin_unlock_bh(&tcp_app_lock);
+	spin_unlock_bh(&ipvs->tcp_app_lock);
 }
 
 
 static int
 tcp_app_conn_bind(struct ip_vs_conn *cp)
 {
+	struct netns_ipvs *ipvs = net_ipvs(ip_vs_conn_net(cp));
 	int hash;
 	struct ip_vs_app *inc;
 	int result = 0;
@@ -639,12 +632,12 @@ tcp_app_conn_bind(struct ip_vs_conn *cp)
 	/* Lookup application incarnations and bind the right one */
 	hash = tcp_app_hashkey(cp->vport);
 
-	spin_lock(&tcp_app_lock);
-	list_for_each_entry(inc, &tcp_apps[hash], p_list) {
+	spin_lock(&ipvs->tcp_app_lock);
+	list_for_each_entry(inc, &ipvs->tcp_apps[hash], p_list) {
 		if (inc->port == cp->vport) {
 			if (unlikely(!ip_vs_app_inc_get(inc)))
 				break;
-			spin_unlock(&tcp_app_lock);
+			spin_unlock(&ipvs->tcp_app_lock);
 
 			IP_VS_DBG_BUF(9, "%s(): Binding conn %s:%u->"
 				      "%s:%u to app %s on port %u\n",
@@ -661,7 +654,7 @@ tcp_app_conn_bind(struct ip_vs_conn *cp)
 			goto out;
 		}
 	}
-	spin_unlock(&tcp_app_lock);
+	spin_unlock(&ipvs->tcp_app_lock);
 
   out:
 	return result;
@@ -671,24 +664,35 @@ tcp_app_conn_bind(struct ip_vs_conn *cp)
 /*
  *	Set LISTEN timeout. (ip_vs_conn_put will setup timer)
  */
-void ip_vs_tcp_conn_listen(struct ip_vs_conn *cp)
+void ip_vs_tcp_conn_listen(struct net *net, struct ip_vs_conn *cp)
 {
+	struct ip_vs_proto_data *pd = ip_vs_proto_data_get(net, IPPROTO_TCP);
+
 	spin_lock(&cp->lock);
 	cp->state = IP_VS_TCP_S_LISTEN;
-	cp->timeout = ip_vs_protocol_tcp.timeout_table[IP_VS_TCP_S_LISTEN];
+	cp->timeout = (pd ? pd->timeout_table[IP_VS_TCP_S_LISTEN]
+			   : tcp_timeouts[IP_VS_TCP_S_LISTEN]);
 	spin_unlock(&cp->lock);
 }
 
-
-static void ip_vs_tcp_init(struct ip_vs_protocol *pp)
+/* ---------------------------------------------
+ *   timeouts is netns related now.
+ * ---------------------------------------------
+ */
+static void __ip_vs_tcp_init(struct net *net, struct ip_vs_proto_data *pd)
 {
-	IP_VS_INIT_HASH_TABLE(tcp_apps);
-	pp->timeout_table = tcp_timeouts;
-}
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
+	ip_vs_init_hash_table(ipvs->tcp_apps, TCP_APP_TAB_SIZE);
+	spin_lock_init(&ipvs->tcp_app_lock);
+	pd->timeout_table = ip_vs_create_timeout_table((int *)tcp_timeouts,
+							sizeof(tcp_timeouts));
+	pd->tcp_state_table =  tcp_states;
+}
 
-static void ip_vs_tcp_exit(struct ip_vs_protocol *pp)
+static void __ip_vs_tcp_exit(struct net *net, struct ip_vs_proto_data *pd)
 {
+	kfree(pd->timeout_table);
 }
 
 
@@ -697,9 +701,10 @@ struct ip_vs_protocol ip_vs_protocol_tcp = {
 	.protocol =		IPPROTO_TCP,
 	.num_states =		IP_VS_TCP_S_LAST,
 	.dont_defrag =		0,
-	.appcnt =		ATOMIC_INIT(0),
-	.init =			ip_vs_tcp_init,
-	.exit =			ip_vs_tcp_exit,
+	.init =			NULL,
+	.exit =			NULL,
+	.init_netns =		__ip_vs_tcp_init,
+	.exit_netns =		__ip_vs_tcp_exit,
 	.register_app =		tcp_register_app,
 	.unregister_app =	tcp_unregister_app,
 	.conn_schedule =	tcp_conn_schedule,
@@ -713,5 +718,4 @@ struct ip_vs_protocol ip_vs_protocol_tcp = {
 	.app_conn_bind =	tcp_app_conn_bind,
 	.debug_packet =		ip_vs_tcpudp_debug_packet,
 	.timeout_change =	tcp_timeout_change,
-	.set_state_timeout =	tcp_set_state_timeout,
 };
diff --git a/net/netfilter/ipvs/ip_vs_proto_udp.c b/net/netfilter/ipvs/ip_vs_proto_udp.c
index cd398de010c..f1282cbe6fe 100644
--- a/net/netfilter/ipvs/ip_vs_proto_udp.c
+++ b/net/netfilter/ipvs/ip_vs_proto_udp.c
@@ -9,7 +9,8 @@
  *              as published by the Free Software Foundation; either version
  *              2 of the License, or (at your option) any later version.
  *
- * Changes:
+ * Changes:     Hans Schillstrom <hans.schillstrom@ericsson.com>
+ *              Network name space (netns) aware.
  *
  */
 
@@ -28,9 +29,10 @@
 #include <net/ip6_checksum.h>
 
 static int
-udp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
+udp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_proto_data *pd,
 		  int *verdict, struct ip_vs_conn **cpp)
 {
+	struct net *net;
 	struct ip_vs_service *svc;
 	struct udphdr _udph, *uh;
 	struct ip_vs_iphdr iph;
@@ -42,13 +44,13 @@ udp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
 		*verdict = NF_DROP;
 		return 0;
 	}
-
-	svc = ip_vs_service_get(af, skb->mark, iph.protocol,
+	net = skb_net(skb);
+	svc = ip_vs_service_get(net, af, skb->mark, iph.protocol,
 				&iph.daddr, uh->dest);
 	if (svc) {
 		int ignored;
 
-		if (ip_vs_todrop()) {
+		if (ip_vs_todrop(net_ipvs(net))) {
 			/*
 			 * It seems that we are very loaded.
 			 * We have to drop this packet :(
@@ -62,10 +64,10 @@ udp_conn_schedule(int af, struct sk_buff *skb, struct ip_vs_protocol *pp,
 		 * Let the virtual server select a real server for the
 		 * incoming connection, and create a connection entry.
 		 */
-		*cpp = ip_vs_schedule(svc, skb, pp, &ignored);
+		*cpp = ip_vs_schedule(svc, skb, pd, &ignored);
 		if (!*cpp && ignored <= 0) {
 			if (!ignored)
-				*verdict = ip_vs_leave(svc, skb, pp);
+				*verdict = ip_vs_leave(svc, skb, pd);
 			else {
 				ip_vs_service_put(svc);
 				*verdict = NF_DROP;
@@ -344,19 +346,6 @@ udp_csum_check(int af, struct sk_buff *skb, struct ip_vs_protocol *pp)
 	return 1;
 }
 
-
-/*
- *	Note: the caller guarantees that only one of register_app,
- *	unregister_app or app_conn_bind is called each time.
- */
-
-#define	UDP_APP_TAB_BITS	4
-#define	UDP_APP_TAB_SIZE	(1 << UDP_APP_TAB_BITS)
-#define	UDP_APP_TAB_MASK	(UDP_APP_TAB_SIZE - 1)
-
-static struct list_head udp_apps[UDP_APP_TAB_SIZE];
-static DEFINE_SPINLOCK(udp_app_lock);
-
 static inline __u16 udp_app_hashkey(__be16 port)
 {
 	return (((__force u16)port >> UDP_APP_TAB_BITS) ^ (__force u16)port)
@@ -364,44 +353,50 @@ static inline __u16 udp_app_hashkey(__be16 port)
 }
 
 
-static int udp_register_app(struct ip_vs_app *inc)
+static int udp_register_app(struct net *net, struct ip_vs_app *inc)
 {
 	struct ip_vs_app *i;
 	__u16 hash;
 	__be16 port = inc->port;
 	int ret = 0;
+	struct netns_ipvs *ipvs = net_ipvs(net);
+	struct ip_vs_proto_data *pd = ip_vs_proto_data_get(net, IPPROTO_UDP);
 
 	hash = udp_app_hashkey(port);
 
 
-	spin_lock_bh(&udp_app_lock);
-	list_for_each_entry(i, &udp_apps[hash], p_list) {
+	spin_lock_bh(&ipvs->udp_app_lock);
+	list_for_each_entry(i, &ipvs->udp_apps[hash], p_list) {
 		if (i->port == port) {
 			ret = -EEXIST;
 			goto out;
 		}
 	}
-	list_add(&inc->p_list, &udp_apps[hash]);
-	atomic_inc(&ip_vs_protocol_udp.appcnt);
+	list_add(&inc->p_list, &ipvs->udp_apps[hash]);
+	atomic_inc(&pd->appcnt);
 
   out:
-	spin_unlock_bh(&udp_app_lock);
+	spin_unlock_bh(&ipvs->udp_app_lock);
 	return ret;
 }
 
 
 static void
-udp_unregister_app(struct ip_vs_app *inc)
+udp_unregister_app(struct net *net, struct ip_vs_app *inc)
 {
-	spin_lock_bh(&udp_app_lock);
-	atomic_dec(&ip_vs_protocol_udp.appcnt);
+	struct ip_vs_proto_data *pd = ip_vs_proto_data_get(net, IPPROTO_UDP);
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	spin_lock_bh(&ipvs->udp_app_lock);
+	atomic_dec(&pd->appcnt);
 	list_del(&inc->p_list);
-	spin_unlock_bh(&udp_app_lock);
+	spin_unlock_bh(&ipvs->udp_app_lock);
 }
 
 
 static int udp_app_conn_bind(struct ip_vs_conn *cp)
 {
+	struct netns_ipvs *ipvs = net_ipvs(ip_vs_conn_net(cp));
 	int hash;
 	struct ip_vs_app *inc;
 	int result = 0;
@@ -413,12 +408,12 @@ static int udp_app_conn_bind(struct ip_vs_conn *cp)
 	/* Lookup application incarnations and bind the right one */
 	hash = udp_app_hashkey(cp->vport);
 
-	spin_lock(&udp_app_lock);
-	list_for_each_entry(inc, &udp_apps[hash], p_list) {
+	spin_lock(&ipvs->udp_app_lock);
+	list_for_each_entry(inc, &ipvs->udp_apps[hash], p_list) {
 		if (inc->port == cp->vport) {
 			if (unlikely(!ip_vs_app_inc_get(inc)))
 				break;
-			spin_unlock(&udp_app_lock);
+			spin_unlock(&ipvs->udp_app_lock);
 
 			IP_VS_DBG_BUF(9, "%s(): Binding conn %s:%u->"
 				      "%s:%u to app %s on port %u\n",
@@ -435,14 +430,14 @@ static int udp_app_conn_bind(struct ip_vs_conn *cp)
 			goto out;
 		}
 	}
-	spin_unlock(&udp_app_lock);
+	spin_unlock(&ipvs->udp_app_lock);
 
   out:
 	return result;
 }
 
 
-static int udp_timeouts[IP_VS_UDP_S_LAST+1] = {
+static const int udp_timeouts[IP_VS_UDP_S_LAST+1] = {
 	[IP_VS_UDP_S_NORMAL]		=	5*60*HZ,
 	[IP_VS_UDP_S_LAST]		=	2*HZ,
 };
@@ -452,14 +447,6 @@ static const char *const udp_state_name_table[IP_VS_UDP_S_LAST+1] = {
 	[IP_VS_UDP_S_LAST]		=	"BUG!",
 };
 
-
-static int
-udp_set_state_timeout(struct ip_vs_protocol *pp, char *sname, int to)
-{
-	return ip_vs_set_state_timeout(pp->timeout_table, IP_VS_UDP_S_LAST,
-				       udp_state_name_table, sname, to);
-}
-
 static const char * udp_state_name(int state)
 {
 	if (state >= IP_VS_UDP_S_LAST)
@@ -470,20 +457,30 @@ static const char * udp_state_name(int state)
 static int
 udp_state_transition(struct ip_vs_conn *cp, int direction,
 		     const struct sk_buff *skb,
-		     struct ip_vs_protocol *pp)
+		     struct ip_vs_proto_data *pd)
 {
-	cp->timeout = pp->timeout_table[IP_VS_UDP_S_NORMAL];
+	if (unlikely(!pd)) {
+		pr_err("UDP no ns data\n");
+		return 0;
+	}
+
+	cp->timeout = pd->timeout_table[IP_VS_UDP_S_NORMAL];
 	return 1;
 }
 
-static void udp_init(struct ip_vs_protocol *pp)
+static void __udp_init(struct net *net, struct ip_vs_proto_data *pd)
 {
-	IP_VS_INIT_HASH_TABLE(udp_apps);
-	pp->timeout_table = udp_timeouts;
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	ip_vs_init_hash_table(ipvs->udp_apps, UDP_APP_TAB_SIZE);
+	spin_lock_init(&ipvs->udp_app_lock);
+	pd->timeout_table = ip_vs_create_timeout_table((int *)udp_timeouts,
+							sizeof(udp_timeouts));
 }
 
-static void udp_exit(struct ip_vs_protocol *pp)
+static void __udp_exit(struct net *net, struct ip_vs_proto_data *pd)
 {
+	kfree(pd->timeout_table);
 }
 
 
@@ -492,8 +489,10 @@ struct ip_vs_protocol ip_vs_protocol_udp = {
 	.protocol =		IPPROTO_UDP,
 	.num_states =		IP_VS_UDP_S_LAST,
 	.dont_defrag =		0,
-	.init =			udp_init,
-	.exit =			udp_exit,
+	.init =			NULL,
+	.exit =			NULL,
+	.init_netns =		__udp_init,
+	.exit_netns =		__udp_exit,
 	.conn_schedule =	udp_conn_schedule,
 	.conn_in_get =		ip_vs_conn_in_get_proto,
 	.conn_out_get =		ip_vs_conn_out_get_proto,
@@ -507,5 +506,4 @@ struct ip_vs_protocol ip_vs_protocol_udp = {
 	.app_conn_bind =	udp_app_conn_bind,
 	.debug_packet =		ip_vs_tcpudp_debug_packet,
 	.timeout_change =	NULL,
-	.set_state_timeout =	udp_set_state_timeout,
 };
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index c1c167ab73e..d1adf988eb0 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -192,6 +192,7 @@ union ip_vs_sync_conn {
 #define IPVS_OPT_F_PARAM	(1 << (IPVS_OPT_PARAM-1))
 
 struct ip_vs_sync_thread_data {
+	struct net *net;
 	struct socket *sock;
 	char *buf;
 };
@@ -259,10 +260,6 @@ struct ip_vs_sync_mesg {
 	/* ip_vs_sync_conn entries start here */
 };
 
-/* the maximum length of sync (sending/receiving) message */
-static int sync_send_mesg_maxlen;
-static int sync_recv_mesg_maxlen;
-
 struct ip_vs_sync_buff {
 	struct list_head        list;
 	unsigned long           firstuse;
@@ -273,28 +270,6 @@ struct ip_vs_sync_buff {
 	unsigned char           *end;
 };
 
-
-/* the sync_buff list head and the lock */
-static LIST_HEAD(ip_vs_sync_queue);
-static DEFINE_SPINLOCK(ip_vs_sync_lock);
-
-/* current sync_buff for accepting new conn entries */
-static struct ip_vs_sync_buff   *curr_sb = NULL;
-static DEFINE_SPINLOCK(curr_sb_lock);
-
-/* ipvs sync daemon state */
-volatile int ip_vs_sync_state = IP_VS_STATE_NONE;
-volatile int ip_vs_master_syncid = 0;
-volatile int ip_vs_backup_syncid = 0;
-
-/* multicast interface name */
-char ip_vs_master_mcast_ifn[IP_VS_IFNAME_MAXLEN];
-char ip_vs_backup_mcast_ifn[IP_VS_IFNAME_MAXLEN];
-
-/* sync daemon tasks */
-static struct task_struct *sync_master_thread;
-static struct task_struct *sync_backup_thread;
-
 /* multicast addr */
 static struct sockaddr_in mcast_addr = {
 	.sin_family		= AF_INET,
@@ -324,20 +299,20 @@ static void hton_seq(struct ip_vs_seq *ho, struct ip_vs_seq *no)
 	put_unaligned_be32(ho->previous_delta, &no->previous_delta);
 }
 
-static inline struct ip_vs_sync_buff *sb_dequeue(void)
+static inline struct ip_vs_sync_buff *sb_dequeue(struct netns_ipvs *ipvs)
 {
 	struct ip_vs_sync_buff *sb;
 
-	spin_lock_bh(&ip_vs_sync_lock);
-	if (list_empty(&ip_vs_sync_queue)) {
+	spin_lock_bh(&ipvs->sync_lock);
+	if (list_empty(&ipvs->sync_queue)) {
 		sb = NULL;
 	} else {
-		sb = list_entry(ip_vs_sync_queue.next,
+		sb = list_entry(ipvs->sync_queue.next,
 				struct ip_vs_sync_buff,
 				list);
 		list_del(&sb->list);
 	}
-	spin_unlock_bh(&ip_vs_sync_lock);
+	spin_unlock_bh(&ipvs->sync_lock);
 
 	return sb;
 }
@@ -345,25 +320,27 @@ static inline struct ip_vs_sync_buff *sb_dequeue(void)
 /*
  * Create a new sync buffer for Version 1 proto.
  */
-static inline struct ip_vs_sync_buff * ip_vs_sync_buff_create(void)
+static inline struct ip_vs_sync_buff *
+ip_vs_sync_buff_create(struct netns_ipvs *ipvs)
 {
 	struct ip_vs_sync_buff *sb;
 
 	if (!(sb=kmalloc(sizeof(struct ip_vs_sync_buff), GFP_ATOMIC)))
 		return NULL;
 
-	if (!(sb->mesg=kmalloc(sync_send_mesg_maxlen, GFP_ATOMIC))) {
+	sb->mesg = kmalloc(ipvs->send_mesg_maxlen, GFP_ATOMIC);
+	if (!sb->mesg) {
 		kfree(sb);
 		return NULL;
 	}
 	sb->mesg->reserved = 0;  /* old nr_conns i.e. must be zeo now */
 	sb->mesg->version = SYNC_PROTO_VER;
-	sb->mesg->syncid = ip_vs_master_syncid;
+	sb->mesg->syncid = ipvs->master_syncid;
 	sb->mesg->size = sizeof(struct ip_vs_sync_mesg);
 	sb->mesg->nr_conns = 0;
 	sb->mesg->spare = 0;
 	sb->head = (unsigned char *)sb->mesg + sizeof(struct ip_vs_sync_mesg);
-	sb->end = (unsigned char *)sb->mesg + sync_send_mesg_maxlen;
+	sb->end = (unsigned char *)sb->mesg + ipvs->send_mesg_maxlen;
 
 	sb->firstuse = jiffies;
 	return sb;
@@ -375,14 +352,16 @@ static inline void ip_vs_sync_buff_release(struct ip_vs_sync_buff *sb)
 	kfree(sb);
 }
 
-static inline void sb_queue_tail(struct ip_vs_sync_buff *sb)
+static inline void sb_queue_tail(struct netns_ipvs *ipvs)
 {
-	spin_lock(&ip_vs_sync_lock);
-	if (ip_vs_sync_state & IP_VS_STATE_MASTER)
-		list_add_tail(&sb->list, &ip_vs_sync_queue);
+	struct ip_vs_sync_buff *sb = ipvs->sync_buff;
+
+	spin_lock(&ipvs->sync_lock);
+	if (ipvs->sync_state & IP_VS_STATE_MASTER)
+		list_add_tail(&sb->list, &ipvs->sync_queue);
 	else
 		ip_vs_sync_buff_release(sb);
-	spin_unlock(&ip_vs_sync_lock);
+	spin_unlock(&ipvs->sync_lock);
 }
 
 /*
@@ -390,18 +369,18 @@ static inline void sb_queue_tail(struct ip_vs_sync_buff *sb)
  *	than the specified time or the specified time is zero.
  */
 static inline struct ip_vs_sync_buff *
-get_curr_sync_buff(unsigned long time)
+get_curr_sync_buff(struct netns_ipvs *ipvs, unsigned long time)
 {
 	struct ip_vs_sync_buff *sb;
 
-	spin_lock_bh(&curr_sb_lock);
-	if (curr_sb && (time == 0 ||
-			time_before(jiffies - curr_sb->firstuse, time))) {
-		sb = curr_sb;
-		curr_sb = NULL;
+	spin_lock_bh(&ipvs->sync_buff_lock);
+	if (ipvs->sync_buff && (time == 0 ||
+	    time_before(jiffies - ipvs->sync_buff->firstuse, time))) {
+		sb = ipvs->sync_buff;
+		ipvs->sync_buff = NULL;
 	} else
 		sb = NULL;
-	spin_unlock_bh(&curr_sb_lock);
+	spin_unlock_bh(&ipvs->sync_buff_lock);
 	return sb;
 }
 
@@ -409,33 +388,37 @@ get_curr_sync_buff(unsigned long time)
  * Switch mode from sending version 0 or 1
  *  - must handle sync_buf
  */
-void ip_vs_sync_switch_mode(int mode) {
+void ip_vs_sync_switch_mode(struct net *net, int mode)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
-	if (!ip_vs_sync_state & IP_VS_STATE_MASTER)
+	if (!ipvs->sync_state & IP_VS_STATE_MASTER)
 		return;
-	if (mode == sysctl_ip_vs_sync_ver || !curr_sb)
+	if (mode == ipvs->sysctl_sync_ver || !ipvs->sync_buff)
 		return;
 
-	spin_lock_bh(&curr_sb_lock);
+	spin_lock_bh(&ipvs->sync_buff_lock);
 	/* Buffer empty ? then let buf_create do the job  */
-	if ( curr_sb->mesg->size <=  sizeof(struct ip_vs_sync_mesg)) {
-		kfree(curr_sb);
-		curr_sb = NULL;
+	if (ipvs->sync_buff->mesg->size <=  sizeof(struct ip_vs_sync_mesg)) {
+		kfree(ipvs->sync_buff);
+		ipvs->sync_buff = NULL;
 	} else {
-		spin_lock_bh(&ip_vs_sync_lock);
-		if (ip_vs_sync_state & IP_VS_STATE_MASTER)
-			list_add_tail(&curr_sb->list, &ip_vs_sync_queue);
+		spin_lock_bh(&ipvs->sync_lock);
+		if (ipvs->sync_state & IP_VS_STATE_MASTER)
+			list_add_tail(&ipvs->sync_buff->list,
+				      &ipvs->sync_queue);
 		else
-			ip_vs_sync_buff_release(curr_sb);
-		spin_unlock_bh(&ip_vs_sync_lock);
+			ip_vs_sync_buff_release(ipvs->sync_buff);
+		spin_unlock_bh(&ipvs->sync_lock);
 	}
-	spin_unlock_bh(&curr_sb_lock);
+	spin_unlock_bh(&ipvs->sync_buff_lock);
 }
 
 /*
  * Create a new sync buffer for Version 0 proto.
  */
-static inline struct ip_vs_sync_buff * ip_vs_sync_buff_create_v0(void)
+static inline struct ip_vs_sync_buff *
+ip_vs_sync_buff_create_v0(struct netns_ipvs *ipvs)
 {
 	struct ip_vs_sync_buff *sb;
 	struct ip_vs_sync_mesg_v0 *mesg;
@@ -443,16 +426,17 @@ static inline struct ip_vs_sync_buff * ip_vs_sync_buff_create_v0(void)
 	if (!(sb=kmalloc(sizeof(struct ip_vs_sync_buff), GFP_ATOMIC)))
 		return NULL;
 
-	if (!(sb->mesg=kmalloc(sync_send_mesg_maxlen, GFP_ATOMIC))) {
+	sb->mesg = kmalloc(ipvs->send_mesg_maxlen, GFP_ATOMIC);
+	if (!sb->mesg) {
 		kfree(sb);
 		return NULL;
 	}
 	mesg = (struct ip_vs_sync_mesg_v0 *)sb->mesg;
 	mesg->nr_conns = 0;
-	mesg->syncid = ip_vs_master_syncid;
-	mesg->size = 4;
-	sb->head = (unsigned char *)mesg + 4;
-	sb->end = (unsigned char *)mesg + sync_send_mesg_maxlen;
+	mesg->syncid = ipvs->master_syncid;
+	mesg->size = sizeof(struct ip_vs_sync_mesg_v0);
+	sb->head = (unsigned char *)mesg + sizeof(struct ip_vs_sync_mesg_v0);
+	sb->end = (unsigned char *)mesg + ipvs->send_mesg_maxlen;
 	sb->firstuse = jiffies;
 	return sb;
 }
@@ -461,8 +445,9 @@ static inline struct ip_vs_sync_buff * ip_vs_sync_buff_create_v0(void)
  *      Version 0 , could be switched in by sys_ctl.
  *      Add an ip_vs_conn information into the current sync_buff.
  */
-void ip_vs_sync_conn_v0(struct ip_vs_conn *cp)
+void ip_vs_sync_conn_v0(struct net *net, struct ip_vs_conn *cp)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct ip_vs_sync_mesg_v0 *m;
 	struct ip_vs_sync_conn_v0 *s;
 	int len;
@@ -473,10 +458,12 @@ void ip_vs_sync_conn_v0(struct ip_vs_conn *cp)
 	if (cp->flags & IP_VS_CONN_F_ONE_PACKET)
 		return;
 
-	spin_lock(&curr_sb_lock);
-	if (!curr_sb) {
-		if (!(curr_sb=ip_vs_sync_buff_create_v0())) {
-			spin_unlock(&curr_sb_lock);
+	spin_lock(&ipvs->sync_buff_lock);
+	if (!ipvs->sync_buff) {
+		ipvs->sync_buff =
+			ip_vs_sync_buff_create_v0(ipvs);
+		if (!ipvs->sync_buff) {
+			spin_unlock(&ipvs->sync_buff_lock);
 			pr_err("ip_vs_sync_buff_create failed.\n");
 			return;
 		}
@@ -484,8 +471,8 @@ void ip_vs_sync_conn_v0(struct ip_vs_conn *cp)
 
 	len = (cp->flags & IP_VS_CONN_F_SEQ_MASK) ? FULL_CONN_SIZE :
 		SIMPLE_CONN_SIZE;
-	m = (struct ip_vs_sync_mesg_v0 *)curr_sb->mesg;
-	s = (struct ip_vs_sync_conn_v0 *)curr_sb->head;
+	m = (struct ip_vs_sync_mesg_v0 *)ipvs->sync_buff->mesg;
+	s = (struct ip_vs_sync_conn_v0 *)ipvs->sync_buff->head;
 
 	/* copy members */
 	s->reserved = 0;
@@ -506,18 +493,18 @@ void ip_vs_sync_conn_v0(struct ip_vs_conn *cp)
 
 	m->nr_conns++;
 	m->size += len;
-	curr_sb->head += len;
+	ipvs->sync_buff->head += len;
 
 	/* check if there is a space for next one */
-	if (curr_sb->head + FULL_CONN_SIZE > curr_sb->end) {
-		sb_queue_tail(curr_sb);
-		curr_sb = NULL;
+	if (ipvs->sync_buff->head + FULL_CONN_SIZE > ipvs->sync_buff->end) {
+		sb_queue_tail(ipvs);
+		ipvs->sync_buff = NULL;
 	}
-	spin_unlock(&curr_sb_lock);
+	spin_unlock(&ipvs->sync_buff_lock);
 
 	/* synchronize its controller if it has */
 	if (cp->control)
-		ip_vs_sync_conn(cp->control);
+		ip_vs_sync_conn(net, cp->control);
 }
 
 /*
@@ -525,16 +512,17 @@ void ip_vs_sync_conn_v0(struct ip_vs_conn *cp)
  *      Called by ip_vs_in.
  *      Sending Version 1 messages
  */
-void ip_vs_sync_conn(struct ip_vs_conn *cp)
+void ip_vs_sync_conn(struct net *net, struct ip_vs_conn *cp)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct ip_vs_sync_mesg *m;
 	union ip_vs_sync_conn *s;
 	__u8 *p;
 	unsigned int len, pe_name_len, pad;
 
 	/* Handle old version of the protocol */
-	if (sysctl_ip_vs_sync_ver == 0) {
-		ip_vs_sync_conn_v0(cp);
+	if (ipvs->sysctl_sync_ver == 0) {
+		ip_vs_sync_conn_v0(net, cp);
 		return;
 	}
 	/* Do not sync ONE PACKET */
@@ -551,7 +539,7 @@ sloop:
 		pe_name_len = strnlen(cp->pe->name, IP_VS_PENAME_MAXLEN);
 	}
 
-	spin_lock(&curr_sb_lock);
+	spin_lock(&ipvs->sync_buff_lock);
 
 #ifdef CONFIG_IP_VS_IPV6
 	if (cp->af == AF_INET6)
@@ -570,26 +558,27 @@ sloop:
 
 	/* check if there is a space for this one  */
 	pad = 0;
-	if (curr_sb) {
-		pad = (4 - (size_t)curr_sb->head) & 3;
-		if (curr_sb->head + len + pad > curr_sb->end) {
-			sb_queue_tail(curr_sb);
-			curr_sb = NULL;
+	if (ipvs->sync_buff) {
+		pad = (4 - (size_t)ipvs->sync_buff->head) & 3;
+		if (ipvs->sync_buff->head + len + pad > ipvs->sync_buff->end) {
+			sb_queue_tail(ipvs);
+			ipvs->sync_buff = NULL;
 			pad = 0;
 		}
 	}
 
-	if (!curr_sb) {
-		if (!(curr_sb=ip_vs_sync_buff_create())) {
-			spin_unlock(&curr_sb_lock);
+	if (!ipvs->sync_buff) {
+		ipvs->sync_buff = ip_vs_sync_buff_create(ipvs);
+		if (!ipvs->sync_buff) {
+			spin_unlock(&ipvs->sync_buff_lock);
 			pr_err("ip_vs_sync_buff_create failed.\n");
 			return;
 		}
 	}
 
-	m = curr_sb->mesg;
-	p = curr_sb->head;
-	curr_sb->head += pad + len;
+	m = ipvs->sync_buff->mesg;
+	p = ipvs->sync_buff->head;
+	ipvs->sync_buff->head += pad + len;
 	m->size += pad + len;
 	/* Add ev. padding from prev. sync_conn */
 	while (pad--)
@@ -647,7 +636,7 @@ sloop:
 		}
 	}
 
-	spin_unlock(&curr_sb_lock);
+	spin_unlock(&ipvs->sync_buff_lock);
 
 control:
 	/* synchronize its controller if it has */
@@ -661,7 +650,7 @@ control:
 	if (cp->flags & IP_VS_CONN_F_TEMPLATE) {
 		int pkts = atomic_add_return(1, &cp->in_pkts);
 
-		if (pkts % sysctl_ip_vs_sync_threshold[1] != 1)
+		if (pkts % ipvs->sysctl_sync_threshold[1] != 1)
 			return;
 	}
 	goto sloop;
@@ -671,21 +660,21 @@ control:
  *  fill_param used by version 1
  */
 static inline int
-ip_vs_conn_fill_param_sync(int af, union ip_vs_sync_conn *sc,
+ip_vs_conn_fill_param_sync(struct net *net, int af, union ip_vs_sync_conn *sc,
 			   struct ip_vs_conn_param *p,
 			   __u8 *pe_data, unsigned int pe_data_len,
 			   __u8 *pe_name, unsigned int pe_name_len)
 {
 #ifdef CONFIG_IP_VS_IPV6
 	if (af == AF_INET6)
-		ip_vs_conn_fill_param(af, sc->v6.protocol,
+		ip_vs_conn_fill_param(net, af, sc->v6.protocol,
 				      (const union nf_inet_addr *)&sc->v6.caddr,
 				      sc->v6.cport,
 				      (const union nf_inet_addr *)&sc->v6.vaddr,
 				      sc->v6.vport, p);
 	else
 #endif
-		ip_vs_conn_fill_param(af, sc->v4.protocol,
+		ip_vs_conn_fill_param(net, af, sc->v4.protocol,
 				      (const union nf_inet_addr *)&sc->v4.caddr,
 				      sc->v4.cport,
 				      (const union nf_inet_addr *)&sc->v4.vaddr,
@@ -699,7 +688,8 @@ ip_vs_conn_fill_param_sync(int af, union ip_vs_sync_conn *sc,
 			buff[pe_name_len]=0;
 			p->pe = __ip_vs_pe_getbyname(buff);
 			if (!p->pe) {
-				IP_VS_DBG(3, "BACKUP, no %s engine found/loaded\n", buff);
+				IP_VS_DBG(3, "BACKUP, no %s engine found/loaded\n",
+					     buff);
 				return 1;
 			}
 		} else {
@@ -725,16 +715,16 @@ ip_vs_conn_fill_param_sync(int af, union ip_vs_sync_conn *sc,
  *  Param: ...
  *         timeout is in sec.
  */
-static void ip_vs_proc_conn(struct ip_vs_conn_param *param,  unsigned flags,
-			    unsigned state, unsigned protocol, unsigned type,
+static void ip_vs_proc_conn(struct net *net, struct ip_vs_conn_param *param,
+			    unsigned int flags, unsigned int state,
+			    unsigned int protocol, unsigned int type,
 			    const union nf_inet_addr *daddr, __be16 dport,
 			    unsigned long timeout, __u32 fwmark,
-			    struct ip_vs_sync_conn_options *opt,
-			    struct ip_vs_protocol *pp)
+			    struct ip_vs_sync_conn_options *opt)
 {
 	struct ip_vs_dest *dest;
 	struct ip_vs_conn *cp;
-
+	struct netns_ipvs *ipvs = net_ipvs(net);
 
 	if (!(flags & IP_VS_CONN_F_TEMPLATE))
 		cp = ip_vs_conn_in_get(param);
@@ -749,7 +739,7 @@ static void ip_vs_proc_conn(struct ip_vs_conn_param *param,  unsigned flags,
 		 * If it is not found the connection will remain unbound
 		 * but still handled.
 		 */
-		dest = ip_vs_find_dest(type, daddr, dport, param->vaddr,
+		dest = ip_vs_find_dest(net, type, daddr, dport, param->vaddr,
 				       param->vport, protocol, fwmark);
 
 		/*  Set the approprite ativity flag */
@@ -805,7 +795,7 @@ static void ip_vs_proc_conn(struct ip_vs_conn_param *param,  unsigned flags,
 
 	if (opt)
 		memcpy(&cp->in_seq, opt, sizeof(*opt));
-	atomic_set(&cp->in_pkts, sysctl_ip_vs_sync_threshold[0]);
+	atomic_set(&cp->in_pkts, ipvs->sysctl_sync_threshold[0]);
 	cp->state = state;
 	cp->old_state = cp->state;
 	/*
@@ -821,17 +811,23 @@ static void ip_vs_proc_conn(struct ip_vs_conn_param *param,  unsigned flags,
 		if (timeout > MAX_SCHEDULE_TIMEOUT / HZ)
 			timeout = MAX_SCHEDULE_TIMEOUT / HZ;
 		cp->timeout = timeout*HZ;
-	} else if (!(flags & IP_VS_CONN_F_TEMPLATE) && pp->timeout_table)
-		cp->timeout = pp->timeout_table[state];
-	else
-		cp->timeout = (3*60*HZ);
+	} else {
+		struct ip_vs_proto_data *pd;
+
+		pd = ip_vs_proto_data_get(net, protocol);
+		if (!(flags & IP_VS_CONN_F_TEMPLATE) && pd && pd->timeout_table)
+			cp->timeout = pd->timeout_table[state];
+		else
+			cp->timeout = (3*60*HZ);
+	}
 	ip_vs_conn_put(cp);
 }
 
 /*
  *  Process received multicast message for Version 0
  */
-static void ip_vs_process_message_v0(const char *buffer, const size_t buflen)
+static void ip_vs_process_message_v0(struct net *net, const char *buffer,
+				     const size_t buflen)
 {
 	struct ip_vs_sync_mesg_v0 *m = (struct ip_vs_sync_mesg_v0 *)buffer;
 	struct ip_vs_sync_conn_v0 *s;
@@ -879,7 +875,6 @@ static void ip_vs_process_message_v0(const char *buffer, const size_t buflen)
 			}
 		} else {
 			/* protocol in templates is not used for state/timeout */
-			pp = NULL;
 			if (state > 0) {
 				IP_VS_DBG(2, "BACKUP v0, Invalid template state %u\n",
 					state);
@@ -887,16 +882,16 @@ static void ip_vs_process_message_v0(const char *buffer, const size_t buflen)
 			}
 		}
 
-		ip_vs_conn_fill_param(AF_INET, s->protocol,
+		ip_vs_conn_fill_param(net, AF_INET, s->protocol,
 				      (const union nf_inet_addr *)&s->caddr,
 				      s->cport,
 				      (const union nf_inet_addr *)&s->vaddr,
 				      s->vport, &param);
 
 		/* Send timeout as Zero */
-		ip_vs_proc_conn(&param, flags, state, s->protocol, AF_INET,
+		ip_vs_proc_conn(net, &param, flags, state, s->protocol, AF_INET,
 				(union nf_inet_addr *)&s->daddr, s->dport,
-				0, 0, opt, pp);
+				0, 0, opt);
 	}
 }
 
@@ -945,7 +940,7 @@ static int ip_vs_proc_str(__u8 *p, unsigned int plen, unsigned int *data_len,
 /*
  *   Process a Version 1 sync. connection
  */
-static inline int ip_vs_proc_sync_conn(__u8 *p, __u8 *msg_end)
+static inline int ip_vs_proc_sync_conn(struct net *net, __u8 *p, __u8 *msg_end)
 {
 	struct ip_vs_sync_conn_options opt;
 	union  ip_vs_sync_conn *s;
@@ -1043,33 +1038,31 @@ static inline int ip_vs_proc_sync_conn(__u8 *p, __u8 *msg_end)
 		}
 	} else {
 		/* protocol in templates is not used for state/timeout */
-		pp = NULL;
 		if (state > 0) {
 			IP_VS_DBG(3, "BACKUP, Invalid template state %u\n",
 				state);
 			state = 0;
 		}
 	}
-	if (ip_vs_conn_fill_param_sync(af, s, &param,
-					pe_data, pe_data_len,
-					pe_name, pe_name_len)) {
+	if (ip_vs_conn_fill_param_sync(net, af, s, &param, pe_data,
+				       pe_data_len, pe_name, pe_name_len)) {
 		retc = 50;
 		goto out;
 	}
 	/* If only IPv4, just silent skip IPv6 */
 	if (af == AF_INET)
-		ip_vs_proc_conn(&param, flags, state, s->v4.protocol, af,
+		ip_vs_proc_conn(net, &param, flags, state, s->v4.protocol, af,
 				(union nf_inet_addr *)&s->v4.daddr, s->v4.dport,
 				ntohl(s->v4.timeout), ntohl(s->v4.fwmark),
-				(opt_flags & IPVS_OPT_F_SEQ_DATA ? &opt : NULL),
-				pp);
+				(opt_flags & IPVS_OPT_F_SEQ_DATA ? &opt : NULL)
+				);
 #ifdef CONFIG_IP_VS_IPV6
 	else
-		ip_vs_proc_conn(&param, flags, state, s->v6.protocol, af,
+		ip_vs_proc_conn(net, &param, flags, state, s->v6.protocol, af,
 				(union nf_inet_addr *)&s->v6.daddr, s->v6.dport,
 				ntohl(s->v6.timeout), ntohl(s->v6.fwmark),
-				(opt_flags & IPVS_OPT_F_SEQ_DATA ? &opt : NULL),
-				pp);
+				(opt_flags & IPVS_OPT_F_SEQ_DATA ? &opt : NULL)
+				);
 #endif
 	return 0;
 	/* Error exit */
@@ -1083,8 +1076,10 @@ out:
  *      ip_vs_conn entries.
  *      Handles Version 0 & 1
  */
-static void ip_vs_process_message(__u8 *buffer, const size_t buflen)
+static void ip_vs_process_message(struct net *net, __u8 *buffer,
+				  const size_t buflen)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct ip_vs_sync_mesg *m2 = (struct ip_vs_sync_mesg *)buffer;
 	__u8 *p, *msg_end;
 	int i, nr_conns;
@@ -1101,7 +1096,7 @@ static void ip_vs_process_message(__u8 *buffer, const size_t buflen)
 		return;
 	}
 	/* SyncID sanity check */
-	if (ip_vs_backup_syncid != 0 && m2->syncid != ip_vs_backup_syncid) {
+	if (ipvs->backup_syncid != 0 && m2->syncid != ipvs->backup_syncid) {
 		IP_VS_DBG(7, "BACKUP, Ignoring syncid = %d\n", m2->syncid);
 		return;
 	}
@@ -1136,7 +1131,8 @@ static void ip_vs_process_message(__u8 *buffer, const size_t buflen)
 				return;
 			}
 			/* Process a single sync_conn */
-			if ((retc=ip_vs_proc_sync_conn(p, msg_end)) < 0) {
+			retc = ip_vs_proc_sync_conn(net, p, msg_end);
+			if (retc < 0) {
 				IP_VS_ERR_RL("BACKUP, Dropping buffer, Err: %d in decoding\n",
 					     retc);
 				return;
@@ -1146,7 +1142,7 @@ static void ip_vs_process_message(__u8 *buffer, const size_t buflen)
 		}
 	} else {
 		/* Old type of message */
-		ip_vs_process_message_v0(buffer, buflen);
+		ip_vs_process_message_v0(net, buffer, buflen);
 		return;
 	}
 }
@@ -1185,8 +1181,10 @@ static int set_mcast_if(struct sock *sk, char *ifname)
 {
 	struct net_device *dev;
 	struct inet_sock *inet = inet_sk(sk);
+	struct net *net = sock_net(sk);
 
-	if ((dev = __dev_get_by_name(&init_net, ifname)) == NULL)
+	dev = __dev_get_by_name(net, ifname);
+	if (!dev)
 		return -ENODEV;
 
 	if (sk->sk_bound_dev_if && dev->ifindex != sk->sk_bound_dev_if)
@@ -1205,30 +1203,33 @@ static int set_mcast_if(struct sock *sk, char *ifname)
  *	Set the maximum length of sync message according to the
  *	specified interface's MTU.
  */
-static int set_sync_mesg_maxlen(int sync_state)
+static int set_sync_mesg_maxlen(struct net *net, int sync_state)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct net_device *dev;
 	int num;
 
 	if (sync_state == IP_VS_STATE_MASTER) {
-		if ((dev = __dev_get_by_name(&init_net, ip_vs_master_mcast_ifn)) == NULL)
+		dev = __dev_get_by_name(net, ipvs->master_mcast_ifn);
+		if (!dev)
 			return -ENODEV;
 
 		num = (dev->mtu - sizeof(struct iphdr) -
 		       sizeof(struct udphdr) -
 		       SYNC_MESG_HEADER_LEN - 20) / SIMPLE_CONN_SIZE;
-		sync_send_mesg_maxlen = SYNC_MESG_HEADER_LEN +
+		ipvs->send_mesg_maxlen = SYNC_MESG_HEADER_LEN +
 			SIMPLE_CONN_SIZE * min(num, MAX_CONNS_PER_SYNCBUFF);
 		IP_VS_DBG(7, "setting the maximum length of sync sending "
-			  "message %d.\n", sync_send_mesg_maxlen);
+			  "message %d.\n", ipvs->send_mesg_maxlen);
 	} else if (sync_state == IP_VS_STATE_BACKUP) {
-		if ((dev = __dev_get_by_name(&init_net, ip_vs_backup_mcast_ifn)) == NULL)
+		dev = __dev_get_by_name(net, ipvs->backup_mcast_ifn);
+		if (!dev)
 			return -ENODEV;
 
-		sync_recv_mesg_maxlen = dev->mtu -
+		ipvs->recv_mesg_maxlen = dev->mtu -
 			sizeof(struct iphdr) - sizeof(struct udphdr);
 		IP_VS_DBG(7, "setting the maximum length of sync receiving "
-			  "message %d.\n", sync_recv_mesg_maxlen);
+			  "message %d.\n", ipvs->recv_mesg_maxlen);
 	}
 
 	return 0;
@@ -1243,6 +1244,7 @@ static int set_sync_mesg_maxlen(int sync_state)
 static int
 join_mcast_group(struct sock *sk, struct in_addr *addr, char *ifname)
 {
+	struct net *net = sock_net(sk);
 	struct ip_mreqn mreq;
 	struct net_device *dev;
 	int ret;
@@ -1250,7 +1252,8 @@ join_mcast_group(struct sock *sk, struct in_addr *addr, char *ifname)
 	memset(&mreq, 0, sizeof(mreq));
 	memcpy(&mreq.imr_multiaddr, addr, sizeof(struct in_addr));
 
-	if ((dev = __dev_get_by_name(&init_net, ifname)) == NULL)
+	dev = __dev_get_by_name(net, ifname);
+	if (!dev)
 		return -ENODEV;
 	if (sk->sk_bound_dev_if && dev->ifindex != sk->sk_bound_dev_if)
 		return -EINVAL;
@@ -1267,11 +1270,13 @@ join_mcast_group(struct sock *sk, struct in_addr *addr, char *ifname)
 
 static int bind_mcastif_addr(struct socket *sock, char *ifname)
 {
+	struct net *net = sock_net(sock->sk);
 	struct net_device *dev;
 	__be32 addr;
 	struct sockaddr_in sin;
 
-	if ((dev = __dev_get_by_name(&init_net, ifname)) == NULL)
+	dev = __dev_get_by_name(net, ifname);
+	if (!dev)
 		return -ENODEV;
 
 	addr = inet_select_addr(dev, 0, RT_SCOPE_UNIVERSE);
@@ -1293,8 +1298,9 @@ static int bind_mcastif_addr(struct socket *sock, char *ifname)
 /*
  *      Set up sending multicast socket over UDP
  */
-static struct socket * make_send_sock(void)
+static struct socket *make_send_sock(struct net *net)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct socket *sock;
 	int result;
 
@@ -1305,7 +1311,7 @@ static struct socket * make_send_sock(void)
 		return ERR_PTR(result);
 	}
 
-	result = set_mcast_if(sock->sk, ip_vs_master_mcast_ifn);
+	result = set_mcast_if(sock->sk, ipvs->master_mcast_ifn);
 	if (result < 0) {
 		pr_err("Error setting outbound mcast interface\n");
 		goto error;
@@ -1314,7 +1320,7 @@ static struct socket * make_send_sock(void)
 	set_mcast_loop(sock->sk, 0);
 	set_mcast_ttl(sock->sk, 1);
 
-	result = bind_mcastif_addr(sock, ip_vs_master_mcast_ifn);
+	result = bind_mcastif_addr(sock, ipvs->master_mcast_ifn);
 	if (result < 0) {
 		pr_err("Error binding address of the mcast interface\n");
 		goto error;
@@ -1338,8 +1344,9 @@ static struct socket * make_send_sock(void)
 /*
  *      Set up receiving multicast socket over UDP
  */
-static struct socket * make_receive_sock(void)
+static struct socket *make_receive_sock(struct net *net)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct socket *sock;
 	int result;
 
@@ -1363,7 +1370,7 @@ static struct socket * make_receive_sock(void)
 	/* join the multicast group */
 	result = join_mcast_group(sock->sk,
 			(struct in_addr *) &mcast_addr.sin_addr,
-			ip_vs_backup_mcast_ifn);
+			ipvs->backup_mcast_ifn);
 	if (result < 0) {
 		pr_err("Error joining to the multicast group\n");
 		goto error;
@@ -1434,20 +1441,21 @@ ip_vs_receive(struct socket *sock, char *buffer, const size_t buflen)
 static int sync_thread_master(void *data)
 {
 	struct ip_vs_sync_thread_data *tinfo = data;
+	struct netns_ipvs *ipvs = net_ipvs(tinfo->net);
 	struct ip_vs_sync_buff *sb;
 
 	pr_info("sync thread started: state = MASTER, mcast_ifn = %s, "
 		"syncid = %d\n",
-		ip_vs_master_mcast_ifn, ip_vs_master_syncid);
+		ipvs->master_mcast_ifn, ipvs->master_syncid);
 
 	while (!kthread_should_stop()) {
-		while ((sb = sb_dequeue())) {
+		while ((sb = sb_dequeue(ipvs))) {
 			ip_vs_send_sync_msg(tinfo->sock, sb->mesg);
 			ip_vs_sync_buff_release(sb);
 		}
 
-		/* check if entries stay in curr_sb for 2 seconds */
-		sb = get_curr_sync_buff(2 * HZ);
+		/* check if entries stay in ipvs->sync_buff for 2 seconds */
+		sb = get_curr_sync_buff(ipvs, 2 * HZ);
 		if (sb) {
 			ip_vs_send_sync_msg(tinfo->sock, sb->mesg);
 			ip_vs_sync_buff_release(sb);
@@ -1457,14 +1465,13 @@ static int sync_thread_master(void *data)
 	}
 
 	/* clean up the sync_buff queue */
-	while ((sb=sb_dequeue())) {
+	while ((sb = sb_dequeue(ipvs)))
 		ip_vs_sync_buff_release(sb);
-	}
 
 	/* clean up the current sync_buff */
-	if ((sb = get_curr_sync_buff(0))) {
+	sb = get_curr_sync_buff(ipvs, 0);
+	if (sb)
 		ip_vs_sync_buff_release(sb);
-	}
 
 	/* release the sending multicast socket */
 	sock_release(tinfo->sock);
@@ -1477,11 +1484,12 @@ static int sync_thread_master(void *data)
 static int sync_thread_backup(void *data)
 {
 	struct ip_vs_sync_thread_data *tinfo = data;
+	struct netns_ipvs *ipvs = net_ipvs(tinfo->net);
 	int len;
 
 	pr_info("sync thread started: state = BACKUP, mcast_ifn = %s, "
 		"syncid = %d\n",
-		ip_vs_backup_mcast_ifn, ip_vs_backup_syncid);
+		ipvs->backup_mcast_ifn, ipvs->backup_syncid);
 
 	while (!kthread_should_stop()) {
 		wait_event_interruptible(*sk_sleep(tinfo->sock->sk),
@@ -1491,7 +1499,7 @@ static int sync_thread_backup(void *data)
 		/* do we have data now? */
 		while (!skb_queue_empty(&(tinfo->sock->sk->sk_receive_queue))) {
 			len = ip_vs_receive(tinfo->sock, tinfo->buf,
-					sync_recv_mesg_maxlen);
+					ipvs->recv_mesg_maxlen);
 			if (len <= 0) {
 				pr_err("receiving message error\n");
 				break;
@@ -1500,7 +1508,7 @@ static int sync_thread_backup(void *data)
 			/* disable bottom half, because it accesses the data
 			   shared by softirq while getting/creating conns */
 			local_bh_disable();
-			ip_vs_process_message(tinfo->buf, len);
+			ip_vs_process_message(tinfo->net, tinfo->buf, len);
 			local_bh_enable();
 		}
 	}
@@ -1514,11 +1522,12 @@ static int sync_thread_backup(void *data)
 }
 
 
-int start_sync_thread(int state, char *mcast_ifn, __u8 syncid)
+int start_sync_thread(struct net *net, int state, char *mcast_ifn, __u8 syncid)
 {
 	struct ip_vs_sync_thread_data *tinfo;
 	struct task_struct **realtask, *task;
 	struct socket *sock;
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	char *name, *buf = NULL;
 	int (*threadfn)(void *data);
 	int result = -ENOMEM;
@@ -1528,27 +1537,27 @@ int start_sync_thread(int state, char *mcast_ifn, __u8 syncid)
 		  sizeof(struct ip_vs_sync_conn_v0));
 
 	if (state == IP_VS_STATE_MASTER) {
-		if (sync_master_thread)
+		if (ipvs->master_thread)
 			return -EEXIST;
 
-		strlcpy(ip_vs_master_mcast_ifn, mcast_ifn,
-			sizeof(ip_vs_master_mcast_ifn));
-		ip_vs_master_syncid = syncid;
-		realtask = &sync_master_thread;
-		name = "ipvs_syncmaster";
+		strlcpy(ipvs->master_mcast_ifn, mcast_ifn,
+			sizeof(ipvs->master_mcast_ifn));
+		ipvs->master_syncid = syncid;
+		realtask = &ipvs->master_thread;
+		name = "ipvs_master:%d";
 		threadfn = sync_thread_master;
-		sock = make_send_sock();
+		sock = make_send_sock(net);
 	} else if (state == IP_VS_STATE_BACKUP) {
-		if (sync_backup_thread)
+		if (ipvs->backup_thread)
 			return -EEXIST;
 
-		strlcpy(ip_vs_backup_mcast_ifn, mcast_ifn,
-			sizeof(ip_vs_backup_mcast_ifn));
-		ip_vs_backup_syncid = syncid;
-		realtask = &sync_backup_thread;
-		name = "ipvs_syncbackup";
+		strlcpy(ipvs->backup_mcast_ifn, mcast_ifn,
+			sizeof(ipvs->backup_mcast_ifn));
+		ipvs->backup_syncid = syncid;
+		realtask = &ipvs->backup_thread;
+		name = "ipvs_backup:%d";
 		threadfn = sync_thread_backup;
-		sock = make_receive_sock();
+		sock = make_receive_sock(net);
 	} else {
 		return -EINVAL;
 	}
@@ -1558,9 +1567,9 @@ int start_sync_thread(int state, char *mcast_ifn, __u8 syncid)
 		goto out;
 	}
 
-	set_sync_mesg_maxlen(state);
+	set_sync_mesg_maxlen(net, state);
 	if (state == IP_VS_STATE_BACKUP) {
-		buf = kmalloc(sync_recv_mesg_maxlen, GFP_KERNEL);
+		buf = kmalloc(ipvs->recv_mesg_maxlen, GFP_KERNEL);
 		if (!buf)
 			goto outsocket;
 	}
@@ -1569,10 +1578,11 @@ int start_sync_thread(int state, char *mcast_ifn, __u8 syncid)
 	if (!tinfo)
 		goto outbuf;
 
+	tinfo->net = net;
 	tinfo->sock = sock;
 	tinfo->buf = buf;
 
-	task = kthread_run(threadfn, tinfo, name);
+	task = kthread_run(threadfn, tinfo, name, ipvs->gen);
 	if (IS_ERR(task)) {
 		result = PTR_ERR(task);
 		goto outtinfo;
@@ -1580,7 +1590,7 @@ int start_sync_thread(int state, char *mcast_ifn, __u8 syncid)
 
 	/* mark as active */
 	*realtask = task;
-	ip_vs_sync_state |= state;
+	ipvs->sync_state |= state;
 
 	/* increase the module use count */
 	ip_vs_use_count_inc();
@@ -1598,16 +1608,18 @@ out:
 }
 
 
-int stop_sync_thread(int state)
+int stop_sync_thread(struct net *net, int state)
 {
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
 	IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
 
 	if (state == IP_VS_STATE_MASTER) {
-		if (!sync_master_thread)
+		if (!ipvs->master_thread)
 			return -ESRCH;
 
 		pr_info("stopping master sync thread %d ...\n",
-			task_pid_nr(sync_master_thread));
+			task_pid_nr(ipvs->master_thread));
 
 		/*
 		 * The lock synchronizes with sb_queue_tail(), so that we don't
@@ -1615,21 +1627,21 @@ int stop_sync_thread(int state)
 		 * progress of stopping the master sync daemon.
 		 */
 
-		spin_lock_bh(&ip_vs_sync_lock);
-		ip_vs_sync_state &= ~IP_VS_STATE_MASTER;
-		spin_unlock_bh(&ip_vs_sync_lock);
-		kthread_stop(sync_master_thread);
-		sync_master_thread = NULL;
+		spin_lock_bh(&ipvs->sync_lock);
+		ipvs->sync_state &= ~IP_VS_STATE_MASTER;
+		spin_unlock_bh(&ipvs->sync_lock);
+		kthread_stop(ipvs->master_thread);
+		ipvs->master_thread = NULL;
 	} else if (state == IP_VS_STATE_BACKUP) {
-		if (!sync_backup_thread)
+		if (!ipvs->backup_thread)
 			return -ESRCH;
 
 		pr_info("stopping backup sync thread %d ...\n",
-			task_pid_nr(sync_backup_thread));
+			task_pid_nr(ipvs->backup_thread));
 
-		ip_vs_sync_state &= ~IP_VS_STATE_BACKUP;
-		kthread_stop(sync_backup_thread);
-		sync_backup_thread = NULL;
+		ipvs->sync_state &= ~IP_VS_STATE_BACKUP;
+		kthread_stop(ipvs->backup_thread);
+		ipvs->backup_thread = NULL;
 	} else {
 		return -EINVAL;
 	}
@@ -1639,3 +1651,42 @@ int stop_sync_thread(int state)
 
 	return 0;
 }
+
+/*
+ * Initialize data struct for each netns
+ */
+static int __net_init __ip_vs_sync_init(struct net *net)
+{
+	struct netns_ipvs *ipvs = net_ipvs(net);
+
+	INIT_LIST_HEAD(&ipvs->sync_queue);
+	spin_lock_init(&ipvs->sync_lock);
+	spin_lock_init(&ipvs->sync_buff_lock);
+
+	ipvs->sync_mcast_addr.sin_family = AF_INET;
+	ipvs->sync_mcast_addr.sin_port = cpu_to_be16(IP_VS_SYNC_PORT);
+	ipvs->sync_mcast_addr.sin_addr.s_addr = cpu_to_be32(IP_VS_SYNC_GROUP);
+	return 0;
+}
+
+static void __ip_vs_sync_cleanup(struct net *net)
+{
+	stop_sync_thread(net, IP_VS_STATE_MASTER);
+	stop_sync_thread(net, IP_VS_STATE_BACKUP);
+}
+
+static struct pernet_operations ipvs_sync_ops = {
+	.init = __ip_vs_sync_init,
+	.exit = __ip_vs_sync_cleanup,
+};
+
+
+int __init ip_vs_sync_init(void)
+{
+	return register_pernet_subsys(&ipvs_sync_ops);
+}
+
+void __exit ip_vs_sync_cleanup(void)
+{
+	unregister_pernet_subsys(&ipvs_sync_ops);
+}
diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c
index fb2a445ddc5..1f2a4e35fb1 100644
--- a/net/netfilter/ipvs/ip_vs_xmit.c
+++ b/net/netfilter/ipvs/ip_vs_xmit.c
@@ -96,12 +96,8 @@ __ip_vs_get_out_rt(struct sk_buff *skb, struct ip_vs_dest *dest,
 		if (!(rt = (struct rtable *)
 		      __ip_vs_dst_check(dest, rtos))) {
 			struct flowi fl = {
-				.oif = 0,
-				.nl_u = {
-					.ip4_u = {
-						.daddr = dest->addr.ip,
-						.saddr = 0,
-						.tos = rtos, } },
+				.fl4_dst = dest->addr.ip,
+				.fl4_tos = rtos,
 			};
 
 			if (ip_route_output_key(net, &rt, &fl)) {
@@ -118,12 +114,8 @@ __ip_vs_get_out_rt(struct sk_buff *skb, struct ip_vs_dest *dest,
 		spin_unlock(&dest->dst_lock);
 	} else {
 		struct flowi fl = {
-			.oif = 0,
-			.nl_u = {
-				.ip4_u = {
-					.daddr = daddr,
-					.saddr = 0,
-					.tos = rtos, } },
+			.fl4_dst = daddr,
+			.fl4_tos = rtos,
 		};
 
 		if (ip_route_output_key(net, &rt, &fl)) {
@@ -178,14 +170,9 @@ __ip_vs_reroute_locally(struct sk_buff *skb)
 		refdst_drop(orefdst);
 	} else {
 		struct flowi fl = {
-			.oif = 0,
-			.nl_u = {
-				.ip4_u = {
-					.daddr = iph->daddr,
-					.saddr = iph->saddr,
-					.tos = RT_TOS(iph->tos),
-				}
-			},
+			.fl4_dst = iph->daddr,
+			.fl4_src = iph->saddr,
+			.fl4_tos = RT_TOS(iph->tos),
 			.mark = skb->mark,
 		};
 
@@ -215,12 +202,7 @@ __ip_vs_route_output_v6(struct net *net, struct in6_addr *daddr,
 {
 	struct dst_entry *dst;
 	struct flowi fl = {
-		.oif = 0,
-		.nl_u = {
-			.ip6_u = {
-				.daddr = *daddr,
-			},
-		},
+		.fl6_dst = *daddr,
 	};
 
 	dst = ip6_route_output(net, NULL, &fl);
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 0ba7d4801da..e95ac42ef67 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -65,7 +65,7 @@ EXPORT_SYMBOL_GPL(nf_conntrack_max);
 DEFINE_PER_CPU(struct nf_conn, nf_conntrack_untracked);
 EXPORT_PER_CPU_SYMBOL(nf_conntrack_untracked);
 
-static unsigned int nf_conntrack_hash_rnd __read_mostly;
+unsigned int nf_conntrack_hash_rnd __read_mostly;
 
 static u32 hash_conntrack_raw(const struct nf_conntrack_tuple *tuple, u16 zone)
 {
@@ -596,6 +596,21 @@ static noinline int early_drop(struct net *net, unsigned int hash)
 	return dropped;
 }
 
+void init_nf_conntrack_hash_rnd(void)
+{
+	unsigned int rand;
+
+	/*
+	 * Why not initialize nf_conntrack_rnd in a "init()" function ?
+	 * Because there isn't enough entropy when system initializing,
+	 * and we initialize it as late as possible.
+	 */
+	do {
+		get_random_bytes(&rand, sizeof(rand));
+	} while (!rand);
+	cmpxchg(&nf_conntrack_hash_rnd, 0, rand);
+}
+
 static struct nf_conn *
 __nf_conntrack_alloc(struct net *net, u16 zone,
 		     const struct nf_conntrack_tuple *orig,
@@ -605,18 +620,7 @@ __nf_conntrack_alloc(struct net *net, u16 zone,
 	struct nf_conn *ct;
 
 	if (unlikely(!nf_conntrack_hash_rnd)) {
-		unsigned int rand;
-
-		/*
-		 * Why not initialize nf_conntrack_rnd in a "init()" function ?
-		 * Because there isn't enough entropy when system initializing,
-		 * and we initialize it as late as possible.
-		 */
-		do {
-			get_random_bytes(&rand, sizeof(rand));
-		} while (!rand);
-		cmpxchg(&nf_conntrack_hash_rnd, 0, rand);
-
+		init_nf_conntrack_hash_rnd();
 		/* recompute the hash as nf_conntrack_hash_rnd is initialized */
 		hash = hash_conntrack_raw(orig, zone);
 	}
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index 774f32ba2ac..4a9ed23180d 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -32,9 +32,7 @@
 unsigned int nf_ct_expect_hsize __read_mostly;
 EXPORT_SYMBOL_GPL(nf_ct_expect_hsize);
 
-static unsigned int nf_ct_expect_hash_rnd __read_mostly;
 unsigned int nf_ct_expect_max __read_mostly;
-static int nf_ct_expect_hash_rnd_initted __read_mostly;
 
 static struct kmem_cache *nf_ct_expect_cachep __read_mostly;
 
@@ -77,15 +75,13 @@ static unsigned int nf_ct_expect_dst_hash(const struct nf_conntrack_tuple *tuple
 {
 	unsigned int hash;
 
-	if (unlikely(!nf_ct_expect_hash_rnd_initted)) {
-		get_random_bytes(&nf_ct_expect_hash_rnd,
-				 sizeof(nf_ct_expect_hash_rnd));
-		nf_ct_expect_hash_rnd_initted = 1;
+	if (unlikely(!nf_conntrack_hash_rnd)) {
+		init_nf_conntrack_hash_rnd();
 	}
 
 	hash = jhash2(tuple->dst.u3.all, ARRAY_SIZE(tuple->dst.u3.all),
 		      (((tuple->dst.protonum ^ tuple->src.l3num) << 16) |
-		       (__force __u16)tuple->dst.u.all) ^ nf_ct_expect_hash_rnd);
+		       (__force __u16)tuple->dst.u.all) ^ nf_conntrack_hash_rnd);
 	return ((u64)hash * nf_ct_expect_hsize) >> 32;
 }
 
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 7f59be82449..9eabaa6f28a 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -254,7 +254,7 @@ ctnetlink_dump_secctx(struct sk_buff *skb, const struct nf_conn *ct)
 
 	ret = security_secid_to_secctx(ct->secmark, &secctx, &len);
 	if (ret)
-		return ret;
+		return 0;
 
 	ret = -1;
 	nest_secctx = nla_nest_start(skb, CTA_SECCTX | NLA_F_NESTED);
@@ -453,16 +453,22 @@ ctnetlink_counters_size(const struct nf_conn *ct)
 	       ;
 }
 
-#ifdef CONFIG_NF_CONNTRACK_SECMARK
-static int ctnetlink_nlmsg_secctx_size(const struct nf_conn *ct)
+static inline int
+ctnetlink_secctx_size(const struct nf_conn *ct)
 {
-	int len;
+#ifdef CONFIG_NF_CONNTRACK_SECMARK
+	int len, ret;
 
-	security_secid_to_secctx(ct->secmark, NULL, &len);
+	ret = security_secid_to_secctx(ct->secmark, NULL, &len);
+	if (ret)
+		return 0;
 
-	return sizeof(char) * len;
-}
+	return nla_total_size(0) /* CTA_SECCTX */
+	       + nla_total_size(sizeof(char) * len); /* CTA_SECCTX_NAME */
+#else
+	return 0;
 #endif
+}
 
 static inline size_t
 ctnetlink_nlmsg_size(const struct nf_conn *ct)
@@ -479,10 +485,7 @@ ctnetlink_nlmsg_size(const struct nf_conn *ct)
 	       + nla_total_size(0) /* CTA_PROTOINFO */
 	       + nla_total_size(0) /* CTA_HELP */
 	       + nla_total_size(NF_CT_HELPER_NAME_LEN) /* CTA_HELP_NAME */
-#ifdef CONFIG_NF_CONNTRACK_SECMARK
-	       + nla_total_size(0) /* CTA_SECCTX */
-	       + nla_total_size(ctnetlink_nlmsg_secctx_size(ct)) /* CTA_SECCTX_NAME */
-#endif
+	       + ctnetlink_secctx_size(ct)
 #ifdef CONFIG_NF_NAT_NEEDED
 	       + 2 * nla_total_size(0) /* CTA_NAT_SEQ_ADJ_ORIG|REPL */
 	       + 6 * nla_total_size(sizeof(u_int32_t)) /* CTA_NAT_SEQ_OFFSET */
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 328f1d2a51f..8257bf64359 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -121,7 +121,7 @@ static int ct_show_secctx(struct seq_file *s, const struct nf_conn *ct)
 
 	ret = security_secid_to_secctx(ct->secmark, &secctx, &len);
 	if (ret)
-		return ret;
+		return 0;
 
 	ret = seq_printf(s, "secctx=%s ", secctx);
 
diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 80463507420..ee5de3af510 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -38,9 +38,8 @@ MODULE_DESCRIPTION("{ip,ip6,arp,eb}_tables backend module");
 #define SMP_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
 
 struct compat_delta {
-	struct compat_delta *next;
-	unsigned int offset;
-	int delta;
+	unsigned int offset; /* offset in kernel */
+	int delta; /* delta in 32bit user land */
 };
 
 struct xt_af {
@@ -49,7 +48,9 @@ struct xt_af {
 	struct list_head target;
 #ifdef CONFIG_COMPAT
 	struct mutex compat_mutex;
-	struct compat_delta *compat_offsets;
+	struct compat_delta *compat_tab;
+	unsigned int number; /* number of slots in compat_tab[] */
+	unsigned int cur; /* number of used slots in compat_tab[] */
 #endif
 };
 
@@ -414,54 +415,67 @@ int xt_check_match(struct xt_mtchk_param *par,
 EXPORT_SYMBOL_GPL(xt_check_match);
 
 #ifdef CONFIG_COMPAT
-int xt_compat_add_offset(u_int8_t af, unsigned int offset, short delta)
+int xt_compat_add_offset(u_int8_t af, unsigned int offset, int delta)
 {
-	struct compat_delta *tmp;
+	struct xt_af *xp = &xt[af];
 
-	tmp = kmalloc(sizeof(struct compat_delta), GFP_KERNEL);
-	if (!tmp)
-		return -ENOMEM;
+	if (!xp->compat_tab) {
+		if (!xp->number)
+			return -EINVAL;
+		xp->compat_tab = vmalloc(sizeof(struct compat_delta) * xp->number);
+		if (!xp->compat_tab)
+			return -ENOMEM;
+		xp->cur = 0;
+	}
 
-	tmp->offset = offset;
-	tmp->delta = delta;
+	if (xp->cur >= xp->number)
+		return -EINVAL;
 
-	if (xt[af].compat_offsets) {
-		tmp->next = xt[af].compat_offsets->next;
-		xt[af].compat_offsets->next = tmp;
-	} else {
-		xt[af].compat_offsets = tmp;
-		tmp->next = NULL;
-	}
+	if (xp->cur)
+		delta += xp->compat_tab[xp->cur - 1].delta;
+	xp->compat_tab[xp->cur].offset = offset;
+	xp->compat_tab[xp->cur].delta = delta;
+	xp->cur++;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(xt_compat_add_offset);
 
 void xt_compat_flush_offsets(u_int8_t af)
 {
-	struct compat_delta *tmp, *next;
-
-	if (xt[af].compat_offsets) {
-		for (tmp = xt[af].compat_offsets; tmp; tmp = next) {
-			next = tmp->next;
-			kfree(tmp);
-		}
-		xt[af].compat_offsets = NULL;
+	if (xt[af].compat_tab) {
+		vfree(xt[af].compat_tab);
+		xt[af].compat_tab = NULL;
+		xt[af].number = 0;
 	}
 }
 EXPORT_SYMBOL_GPL(xt_compat_flush_offsets);
 
 int xt_compat_calc_jump(u_int8_t af, unsigned int offset)
 {
-	struct compat_delta *tmp;
-	int delta;
-
-	for (tmp = xt[af].compat_offsets, delta = 0; tmp; tmp = tmp->next)
-		if (tmp->offset < offset)
-			delta += tmp->delta;
-	return delta;
+	struct compat_delta *tmp = xt[af].compat_tab;
+	int mid, left = 0, right = xt[af].cur - 1;
+
+	while (left <= right) {
+		mid = (left + right) >> 1;
+		if (offset > tmp[mid].offset)
+			left = mid + 1;
+		else if (offset < tmp[mid].offset)
+			right = mid - 1;
+		else
+			return mid ? tmp[mid - 1].delta : 0;
+	}
+	WARN_ON_ONCE(1);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(xt_compat_calc_jump);
 
+void xt_compat_init_offsets(u_int8_t af, unsigned int number)
+{
+	xt[af].number = number;
+	xt[af].cur = 0;
+}
+EXPORT_SYMBOL(xt_compat_init_offsets);
+
 int xt_compat_match_offset(const struct xt_match *match)
 {
 	u_int16_t csize = match->compatsize ? : match->matchsize;
@@ -1337,7 +1351,7 @@ static int __init xt_init(void)
 		mutex_init(&xt[i].mutex);
 #ifdef CONFIG_COMPAT
 		mutex_init(&xt[i].compat_mutex);
-		xt[i].compat_offsets = NULL;
+		xt[i].compat_tab = NULL;
 #endif
 		INIT_LIST_HEAD(&xt[i].target);
 		INIT_LIST_HEAD(&xt[i].match);
diff --git a/net/netfilter/xt_TEE.c b/net/netfilter/xt_TEE.c
index 22a2d421e7e..5128a6c4cb2 100644
--- a/net/netfilter/xt_TEE.c
+++ b/net/netfilter/xt_TEE.c
@@ -70,9 +70,9 @@ tee_tg_route4(struct sk_buff *skb, const struct xt_tee_tginfo *info)
 			return false;
 		fl.oif = info->priv->oif;
 	}
-	fl.nl_u.ip4_u.daddr = info->gw.ip;
-	fl.nl_u.ip4_u.tos   = RT_TOS(iph->tos);
-	fl.nl_u.ip4_u.scope = RT_SCOPE_UNIVERSE;
+	fl.fl4_dst = info->gw.ip;
+	fl.fl4_tos = RT_TOS(iph->tos);
+	fl.fl4_scope = RT_SCOPE_UNIVERSE;
 	if (ip_route_output_key(net, &rt, &fl) != 0)
 		return false;
 
@@ -150,9 +150,9 @@ tee_tg_route6(struct sk_buff *skb, const struct xt_tee_tginfo *info)
 			return false;
 		fl.oif = info->priv->oif;
 	}
-	fl.nl_u.ip6_u.daddr = info->gw.in6;
-	fl.nl_u.ip6_u.flowlabel = ((iph->flow_lbl[0] & 0xF) << 16) |
-				  (iph->flow_lbl[1] << 8) | iph->flow_lbl[2];
+	fl.fl6_dst = info->gw.in6;
+	fl.fl6_flowlabel = ((iph->flow_lbl[0] & 0xF) << 16) |
+			   (iph->flow_lbl[1] << 8) | iph->flow_lbl[2];
 	dst = ip6_route_output(net, NULL, &fl);
 	if (dst == NULL)
 		return false;
diff --git a/net/netfilter/xt_conntrack.c b/net/netfilter/xt_conntrack.c
index e536710ad91..4ef1b63ad73 100644
--- a/net/netfilter/xt_conntrack.c
+++ b/net/netfilter/xt_conntrack.c
@@ -112,6 +112,54 @@ ct_proto_port_check(const struct xt_conntrack_mtinfo2 *info,
 	return true;
 }
 
+static inline bool
+port_match(u16 min, u16 max, u16 port, bool invert)
+{
+	return (port >= min && port <= max) ^ invert;
+}
+
+static inline bool
+ct_proto_port_check_v3(const struct xt_conntrack_mtinfo3 *info,
+		       const struct nf_conn *ct)
+{
+	const struct nf_conntrack_tuple *tuple;
+
+	tuple = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
+	if ((info->match_flags & XT_CONNTRACK_PROTO) &&
+	    (nf_ct_protonum(ct) == info->l4proto) ^
+	    !(info->invert_flags & XT_CONNTRACK_PROTO))
+		return false;
+
+	/* Shortcut to match all recognized protocols by using ->src.all. */
+	if ((info->match_flags & XT_CONNTRACK_ORIGSRC_PORT) &&
+	    !port_match(info->origsrc_port, info->origsrc_port_high,
+			ntohs(tuple->src.u.all),
+			info->invert_flags & XT_CONNTRACK_ORIGSRC_PORT))
+		return false;
+
+	if ((info->match_flags & XT_CONNTRACK_ORIGDST_PORT) &&
+	    !port_match(info->origdst_port, info->origdst_port_high,
+			ntohs(tuple->dst.u.all),
+			info->invert_flags & XT_CONNTRACK_ORIGDST_PORT))
+		return false;
+
+	tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
+
+	if ((info->match_flags & XT_CONNTRACK_REPLSRC_PORT) &&
+	    !port_match(info->replsrc_port, info->replsrc_port_high,
+			ntohs(tuple->src.u.all),
+			info->invert_flags & XT_CONNTRACK_REPLSRC_PORT))
+		return false;
+
+	if ((info->match_flags & XT_CONNTRACK_REPLDST_PORT) &&
+	    !port_match(info->repldst_port, info->repldst_port_high,
+			ntohs(tuple->dst.u.all),
+			info->invert_flags & XT_CONNTRACK_REPLDST_PORT))
+		return false;
+
+	return true;
+}
+
 static bool
 conntrack_mt(const struct sk_buff *skb, struct xt_action_param *par,
              u16 state_mask, u16 status_mask)
@@ -170,8 +218,13 @@ conntrack_mt(const struct sk_buff *skb, struct xt_action_param *par,
 		    !(info->invert_flags & XT_CONNTRACK_REPLDST))
 			return false;
 
-	if (!ct_proto_port_check(info, ct))
-		return false;
+	if (par->match->revision != 3) {
+		if (!ct_proto_port_check(info, ct))
+			return false;
+	} else {
+		if (!ct_proto_port_check_v3(par->matchinfo, ct))
+			return false;
+	}
 
 	if ((info->match_flags & XT_CONNTRACK_STATUS) &&
 	    (!!(status_mask & ct->status) ^
@@ -207,6 +260,14 @@ conntrack_mt_v2(const struct sk_buff *skb, struct xt_action_param *par)
 	return conntrack_mt(skb, par, info->state_mask, info->status_mask);
 }
 
+static bool
+conntrack_mt_v3(const struct sk_buff *skb, struct xt_action_param *par)
+{
+	const struct xt_conntrack_mtinfo3 *info = par->matchinfo;
+
+	return conntrack_mt(skb, par, info->state_mask, info->status_mask);
+}
+
 static int conntrack_mt_check(const struct xt_mtchk_param *par)
 {
 	int ret;
@@ -244,6 +305,16 @@ static struct xt_match conntrack_mt_reg[] __read_mostly = {
 		.destroy    = conntrack_mt_destroy,
 		.me         = THIS_MODULE,
 	},
+	{
+		.name       = "conntrack",
+		.revision   = 3,
+		.family     = NFPROTO_UNSPEC,
+		.matchsize  = sizeof(struct xt_conntrack_mtinfo3),
+		.match      = conntrack_mt_v3,
+		.checkentry = conntrack_mt_check,
+		.destroy    = conntrack_mt_destroy,
+		.me         = THIS_MODULE,
+	},
 };
 
 static int __init conntrack_mt_init(void)
diff --git a/net/netfilter/xt_ipvs.c b/net/netfilter/xt_ipvs.c
index 9127a3d8aa3..bb10b0717f1 100644
--- a/net/netfilter/xt_ipvs.c
+++ b/net/netfilter/xt_ipvs.c
@@ -85,7 +85,7 @@ ipvs_mt(const struct sk_buff *skb, struct xt_action_param *par)
 	/*
 	 * Check if the packet belongs to an existing entry
 	 */
-	cp = pp->conn_out_get(family, skb, pp, &iph, iph.len, 1 /* inverse */);
+	cp = pp->conn_out_get(family, skb, &iph, iph.len, 1 /* inverse */);
 	if (unlikely(cp == NULL)) {
 		match = false;
 		goto out;
diff --git a/net/netlabel/netlabel_cipso_v4.h b/net/netlabel/netlabel_cipso_v4.h
index c8a4079261f..af7f3355103 100644
--- a/net/netlabel/netlabel_cipso_v4.h
+++ b/net/netlabel/netlabel_cipso_v4.h
@@ -107,7 +107,6 @@ enum {
 	NLBL_CIPSOV4_C_LISTALL,
 	__NLBL_CIPSOV4_C_MAX,
 };
-#define NLBL_CIPSOV4_C_MAX (__NLBL_CIPSOV4_C_MAX - 1)
 
 /* NetLabel CIPSOv4 attributes */
 enum {
diff --git a/net/netlabel/netlabel_mgmt.h b/net/netlabel/netlabel_mgmt.h
index 05d96431f81..0a25838bcf4 100644
--- a/net/netlabel/netlabel_mgmt.h
+++ b/net/netlabel/netlabel_mgmt.h
@@ -173,7 +173,6 @@ enum {
 	NLBL_MGMT_C_VERSION,
 	__NLBL_MGMT_C_MAX,
 };
-#define NLBL_MGMT_C_MAX (__NLBL_MGMT_C_MAX - 1)
 
 /* NetLabel Management attributes */
 enum {
diff --git a/net/netlabel/netlabel_unlabeled.h b/net/netlabel/netlabel_unlabeled.h
index 7aba6359513..0bc8dc3f9e3 100644
--- a/net/netlabel/netlabel_unlabeled.h
+++ b/net/netlabel/netlabel_unlabeled.h
@@ -180,7 +180,6 @@ enum {
 	NLBL_UNLABEL_C_STATICLISTDEF,
 	__NLBL_UNLABEL_C_MAX,
 };
-#define NLBL_UNLABEL_C_MAX (__NLBL_UNLABEL_C_MAX - 1)
 
 /* NetLabel Unlabeled attributes */
 enum {
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 3616f27b9d4..91cb1d71f01 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -61,6 +61,7 @@
 #include <linux/kernel.h>
 #include <linux/kmod.h>
 #include <linux/slab.h>
+#include <linux/vmalloc.h>
 #include <net/net_namespace.h>
 #include <net/ip.h>
 #include <net/protocol.h>
@@ -163,8 +164,13 @@ struct packet_mreq_max {
 static int packet_set_ring(struct sock *sk, struct tpacket_req *req,
 		int closing, int tx_ring);
 
+#define PGV_FROM_VMALLOC 1
+struct pgv {
+	char *buffer;
+};
+
 struct packet_ring_buffer {
-	char			**pg_vec;
+	struct pgv		*pg_vec;
 	unsigned int		head;
 	unsigned int		frames_per_block;
 	unsigned int		frame_size;
@@ -217,6 +223,13 @@ struct packet_skb_cb {
 
 #define PACKET_SKB_CB(__skb)	((struct packet_skb_cb *)((__skb)->cb))
 
+static inline __pure struct page *pgv_to_page(void *addr)
+{
+	if (is_vmalloc_addr(addr))
+		return vmalloc_to_page(addr);
+	return virt_to_page(addr);
+}
+
 static void __packet_set_status(struct packet_sock *po, void *frame, int status)
 {
 	union {
@@ -229,11 +242,11 @@ static void __packet_set_status(struct packet_sock *po, void *frame, int status)
 	switch (po->tp_version) {
 	case TPACKET_V1:
 		h.h1->tp_status = status;
-		flush_dcache_page(virt_to_page(&h.h1->tp_status));
+		flush_dcache_page(pgv_to_page(&h.h1->tp_status));
 		break;
 	case TPACKET_V2:
 		h.h2->tp_status = status;
-		flush_dcache_page(virt_to_page(&h.h2->tp_status));
+		flush_dcache_page(pgv_to_page(&h.h2->tp_status));
 		break;
 	default:
 		pr_err("TPACKET version not supported\n");
@@ -256,10 +269,10 @@ static int __packet_get_status(struct packet_sock *po, void *frame)
 	h.raw = frame;
 	switch (po->tp_version) {
 	case TPACKET_V1:
-		flush_dcache_page(virt_to_page(&h.h1->tp_status));
+		flush_dcache_page(pgv_to_page(&h.h1->tp_status));
 		return h.h1->tp_status;
 	case TPACKET_V2:
-		flush_dcache_page(virt_to_page(&h.h2->tp_status));
+		flush_dcache_page(pgv_to_page(&h.h2->tp_status));
 		return h.h2->tp_status;
 	default:
 		pr_err("TPACKET version not supported\n");
@@ -283,7 +296,8 @@ static void *packet_lookup_frame(struct packet_sock *po,
 	pg_vec_pos = position / rb->frames_per_block;
 	frame_offset = position % rb->frames_per_block;
 
-	h.raw = rb->pg_vec[pg_vec_pos] + (frame_offset * rb->frame_size);
+	h.raw = rb->pg_vec[pg_vec_pos].buffer +
+		(frame_offset * rb->frame_size);
 
 	if (status != __packet_get_status(po, h.raw))
 		return NULL;
@@ -503,7 +517,8 @@ out_free:
 	return err;
 }
 
-static inline unsigned int run_filter(struct sk_buff *skb, struct sock *sk,
+static inline unsigned int run_filter(const struct sk_buff *skb,
+				      const struct sock *sk,
 				      unsigned int res)
 {
 	struct sk_filter *filter;
@@ -511,22 +526,22 @@ static inline unsigned int run_filter(struct sk_buff *skb, struct sock *sk,
 	rcu_read_lock_bh();
 	filter = rcu_dereference_bh(sk->sk_filter);
 	if (filter != NULL)
-		res = sk_run_filter(skb, filter->insns, filter->len);
+		res = sk_run_filter(skb, filter->insns);
 	rcu_read_unlock_bh();
 
 	return res;
 }
 
 /*
-   This function makes lazy skb cloning in hope that most of packets
-   are discarded by BPF.
-
-   Note tricky part: we DO mangle shared skb! skb->data, skb->len
-   and skb->cb are mangled. It works because (and until) packets
-   falling here are owned by current CPU. Output packets are cloned
-   by dev_queue_xmit_nit(), input packets are processed by net_bh
-   sequencially, so that if we return skb to original state on exit,
-   we will not harm anyone.
+ * This function makes lazy skb cloning in hope that most of packets
+ * are discarded by BPF.
+ *
+ * Note tricky part: we DO mangle shared skb! skb->data, skb->len
+ * and skb->cb are mangled. It works because (and until) packets
+ * falling here are owned by current CPU. Output packets are cloned
+ * by dev_queue_xmit_nit(), input packets are processed by net_bh
+ * sequencially, so that if we return skb to original state on exit,
+ * we will not harm anyone.
  */
 
 static int packet_rcv(struct sk_buff *skb, struct net_device *dev,
@@ -552,11 +567,11 @@ static int packet_rcv(struct sk_buff *skb, struct net_device *dev,
 
 	if (dev->header_ops) {
 		/* The device has an explicit notion of ll header,
-		   exported to higher levels.
-
-		   Otherwise, the device hides datails of it frame
-		   structure, so that corresponding packet head
-		   never delivered to user.
+		 * exported to higher levels.
+		 *
+		 * Otherwise, the device hides details of its frame
+		 * structure, so that corresponding packet head is
+		 * never delivered to user.
 		 */
 		if (sk->sk_type != SOCK_DGRAM)
 			skb_push(skb, skb->data - skb_mac_header(skb));
@@ -791,17 +806,15 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
 
 	__packet_set_status(po, h.raw, status);
 	smp_mb();
+#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE == 1
 	{
-		struct page *p_start, *p_end;
-		u8 *h_end = h.raw + macoff + snaplen - 1;
-
-		p_start = virt_to_page(h.raw);
-		p_end = virt_to_page(h_end);
-		while (p_start <= p_end) {
-			flush_dcache_page(p_start);
-			p_start++;
-		}
+		u8 *start, *end;
+
+		end = (u8 *)PAGE_ALIGN((unsigned long)h.raw + macoff + snaplen);
+		for (start = h.raw; start < end; start += PAGE_SIZE)
+			flush_dcache_page(pgv_to_page(start));
 	}
+#endif
 
 	sk->sk_data_ready(sk, 0);
 
@@ -907,7 +920,6 @@ static int tpacket_fill_skb(struct packet_sock *po, struct sk_buff *skb,
 	}
 
 	err = -EFAULT;
-	page = virt_to_page(data);
 	offset = offset_in_page(data);
 	len_max = PAGE_SIZE - offset;
 	len = ((to_write > len_max) ? len_max : to_write);
@@ -926,11 +938,11 @@ static int tpacket_fill_skb(struct packet_sock *po, struct sk_buff *skb,
 			return -EFAULT;
 		}
 
+		page = pgv_to_page(data);
+		data += len;
 		flush_dcache_page(page);
 		get_page(page);
-		skb_fill_page_desc(skb,
-				nr_frags,
-				page++, offset, len);
+		skb_fill_page_desc(skb, nr_frags, page, offset, len);
 		to_write -= len;
 		offset = 0;
 		len_max = PAGE_SIZE;
@@ -1610,9 +1622,11 @@ static int packet_recvmsg(struct kiocb *iocb, struct socket *sock,
 
 		err = -EINVAL;
 		vnet_hdr_len = sizeof(vnet_hdr);
-		if ((len -= vnet_hdr_len) < 0)
+		if (len < vnet_hdr_len)
 			goto out_free;
 
+		len -= vnet_hdr_len;
+
 		if (skb_is_gso(skb)) {
 			struct skb_shared_info *sinfo = skb_shinfo(skb);
 
@@ -1636,8 +1650,7 @@ static int packet_recvmsg(struct kiocb *iocb, struct socket *sock,
 
 		if (skb->ip_summed == CHECKSUM_PARTIAL) {
 			vnet_hdr.flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
-			vnet_hdr.csum_start = skb->csum_start -
-							skb_headroom(skb);
+			vnet_hdr.csum_start = skb_checksum_start_offset(skb);
 			vnet_hdr.csum_offset = skb->csum_offset;
 		} /* else everything is zero */
 
@@ -1719,7 +1732,7 @@ static int packet_getname_spkt(struct socket *sock, struct sockaddr *uaddr,
 	rcu_read_lock();
 	dev = dev_get_by_index_rcu(sock_net(sk), pkt_sk(sk)->ifindex);
 	if (dev)
-		strlcpy(uaddr->sa_data, dev->name, 15);
+		strncpy(uaddr->sa_data, dev->name, 14);
 	else
 		memset(uaddr->sa_data, 0, 14);
 	rcu_read_unlock();
@@ -1742,6 +1755,7 @@ static int packet_getname(struct socket *sock, struct sockaddr *uaddr,
 	sll->sll_family = AF_PACKET;
 	sll->sll_ifindex = po->ifindex;
 	sll->sll_protocol = po->num;
+	sll->sll_pkttype = 0;
 	rcu_read_lock();
 	dev = dev_get_by_index_rcu(sock_net(sk), po->ifindex);
 	if (dev) {
@@ -2322,37 +2336,70 @@ static const struct vm_operations_struct packet_mmap_ops = {
 	.close	=	packet_mm_close,
 };
 
-static void free_pg_vec(char **pg_vec, unsigned int order, unsigned int len)
+static void free_pg_vec(struct pgv *pg_vec, unsigned int order,
+			unsigned int len)
 {
 	int i;
 
 	for (i = 0; i < len; i++) {
-		if (likely(pg_vec[i]))
-			free_pages((unsigned long) pg_vec[i], order);
+		if (likely(pg_vec[i].buffer)) {
+			if (is_vmalloc_addr(pg_vec[i].buffer))
+				vfree(pg_vec[i].buffer);
+			else
+				free_pages((unsigned long)pg_vec[i].buffer,
+					   order);
+			pg_vec[i].buffer = NULL;
+		}
 	}
 	kfree(pg_vec);
 }
 
 static inline char *alloc_one_pg_vec_page(unsigned long order)
 {
-	gfp_t gfp_flags = GFP_KERNEL | __GFP_COMP | __GFP_ZERO | __GFP_NOWARN;
+	char *buffer = NULL;
+	gfp_t gfp_flags = GFP_KERNEL | __GFP_COMP |
+			  __GFP_ZERO | __GFP_NOWARN | __GFP_NORETRY;
+
+	buffer = (char *) __get_free_pages(gfp_flags, order);
+
+	if (buffer)
+		return buffer;
+
+	/*
+	 * __get_free_pages failed, fall back to vmalloc
+	 */
+	buffer = vzalloc((1 << order) * PAGE_SIZE);
 
-	return (char *) __get_free_pages(gfp_flags, order);
+	if (buffer)
+		return buffer;
+
+	/*
+	 * vmalloc failed, lets dig into swap here
+	 */
+	gfp_flags &= ~__GFP_NORETRY;
+	buffer = (char *)__get_free_pages(gfp_flags, order);
+	if (buffer)
+		return buffer;
+
+	/*
+	 * complete and utter failure
+	 */
+	return NULL;
 }
 
-static char **alloc_pg_vec(struct tpacket_req *req, int order)
+static struct pgv *alloc_pg_vec(struct tpacket_req *req, int order)
 {
 	unsigned int block_nr = req->tp_block_nr;
-	char **pg_vec;
+	struct pgv *pg_vec;
 	int i;
 
-	pg_vec = kzalloc(block_nr * sizeof(char *), GFP_KERNEL);
+	pg_vec = kcalloc(block_nr, sizeof(struct pgv), GFP_KERNEL);
 	if (unlikely(!pg_vec))
 		goto out;
 
 	for (i = 0; i < block_nr; i++) {
-		pg_vec[i] = alloc_one_pg_vec_page(order);
-		if (unlikely(!pg_vec[i]))
+		pg_vec[i].buffer = alloc_one_pg_vec_page(order);
+		if (unlikely(!pg_vec[i].buffer))
 			goto out_free_pgvec;
 	}
 
@@ -2368,7 +2415,7 @@ out_free_pgvec:
 static int packet_set_ring(struct sock *sk, struct tpacket_req *req,
 		int closing, int tx_ring)
 {
-	char **pg_vec = NULL;
+	struct pgv *pg_vec = NULL;
 	struct packet_sock *po = pkt_sk(sk);
 	int was_running, order = 0;
 	struct packet_ring_buffer *rb;
@@ -2453,22 +2500,20 @@ static int packet_set_ring(struct sock *sk, struct tpacket_req *req,
 	mutex_lock(&po->pg_vec_lock);
 	if (closing || atomic_read(&po->mapped) == 0) {
 		err = 0;
-#define XC(a, b) ({ __typeof__ ((a)) __t; __t = (a); (a) = (b); __t; })
 		spin_lock_bh(&rb_queue->lock);
-		pg_vec = XC(rb->pg_vec, pg_vec);
+		swap(rb->pg_vec, pg_vec);
 		rb->frame_max = (req->tp_frame_nr - 1);
 		rb->head = 0;
 		rb->frame_size = req->tp_frame_size;
 		spin_unlock_bh(&rb_queue->lock);
 
-		order = XC(rb->pg_vec_order, order);
-		req->tp_block_nr = XC(rb->pg_vec_len, req->tp_block_nr);
+		swap(rb->pg_vec_order, order);
+		swap(rb->pg_vec_len, req->tp_block_nr);
 
 		rb->pg_vec_pages = req->tp_block_size/PAGE_SIZE;
 		po->prot_hook.func = (po->rx_ring.pg_vec) ?
 						tpacket_rcv : packet_rcv;
 		skb_queue_purge(rb_queue);
-#undef XC
 		if (atomic_read(&po->mapped))
 			pr_err("packet_mmap: vma is busy: %d\n",
 			       atomic_read(&po->mapped));
@@ -2530,15 +2575,17 @@ static int packet_mmap(struct file *file, struct socket *sock,
 			continue;
 
 		for (i = 0; i < rb->pg_vec_len; i++) {
-			struct page *page = virt_to_page(rb->pg_vec[i]);
+			struct page *page;
+			void *kaddr = rb->pg_vec[i].buffer;
 			int pg_num;
 
-			for (pg_num = 0; pg_num < rb->pg_vec_pages;
-					pg_num++, page++) {
+			for (pg_num = 0; pg_num < rb->pg_vec_pages; pg_num++) {
+				page = pgv_to_page(kaddr);
 				err = vm_insert_page(vma, start, page);
 				if (unlikely(err))
 					goto out;
 				start += PAGE_SIZE;
+				kaddr += PAGE_SIZE;
 			}
 		}
 	}
diff --git a/net/phonet/Makefile b/net/phonet/Makefile
index d62bbba649b..e10b1b182ce 100644
--- a/net/phonet/Makefile
+++ b/net/phonet/Makefile
@@ -1,6 +1,6 @@
 obj-$(CONFIG_PHONET) += phonet.o pn_pep.o
 
-phonet-objs := \
+phonet-y := \
 	pn_dev.o \
 	pn_netlink.o \
 	socket.o \
@@ -8,4 +8,4 @@ phonet-objs := \
 	sysctl.o \
 	af_phonet.o
 
-pn_pep-objs := pep.o pep-gprs.o
+pn_pep-y := pep.o pep-gprs.o
diff --git a/net/rds/Makefile b/net/rds/Makefile
index b46eca10968..56d3f6023ce 100644
--- a/net/rds/Makefile
+++ b/net/rds/Makefile
@@ -4,7 +4,7 @@ rds-y :=	af_rds.o bind.o cong.o connection.o info.o message.o   \
 			loop.o page.o rdma.o
 
 obj-$(CONFIG_RDS_RDMA) += rds_rdma.o
-rds_rdma-objs :=	rdma_transport.o \
+rds_rdma-y :=	rdma_transport.o \
 			ib.o ib_cm.o ib_recv.o ib_ring.o ib_send.o ib_stats.o \
 			ib_sysctl.o ib_rdma.o \
 			iw.o iw_cm.o iw_recv.o iw_ring.o iw_send.o iw_stats.o \
@@ -12,10 +12,8 @@ rds_rdma-objs :=	rdma_transport.o \
 
 
 obj-$(CONFIG_RDS_TCP) += rds_tcp.o
-rds_tcp-objs :=		tcp.o tcp_connect.o tcp_listen.o tcp_recv.o \
+rds_tcp-y :=		tcp.o tcp_connect.o tcp_listen.o tcp_recv.o \
 			tcp_send.o tcp_stats.o
 
-ifeq ($(CONFIG_RDS_DEBUG), y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+ccflags-$(CONFIG_RDS_DEBUG)	:=	-DDEBUG
 
diff --git a/net/rds/rdma.c b/net/rds/rdma.c
index 8920f2a8332..4e37c1cbe8b 100644
--- a/net/rds/rdma.c
+++ b/net/rds/rdma.c
@@ -567,7 +567,7 @@ int rds_cmsg_rdma_args(struct rds_sock *rs, struct rds_message *rm,
 		goto out;
 	}
 
-	if (args->nr_local > (u64)UINT_MAX) {
+	if (args->nr_local > UIO_MAXIOV) {
 		ret = -EMSGSIZE;
 		goto out;
 	}
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 04f599089e6..0198191b756 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -149,20 +149,6 @@ static void rfkill_led_trigger_activate(struct led_classdev *led)
 	rfkill_led_trigger_event(rfkill);
 }
 
-const char *rfkill_get_led_trigger_name(struct rfkill *rfkill)
-{
-	return rfkill->led_trigger.name;
-}
-EXPORT_SYMBOL(rfkill_get_led_trigger_name);
-
-void rfkill_set_led_trigger_name(struct rfkill *rfkill, const char *name)
-{
-	BUG_ON(!rfkill);
-
-	rfkill->ledtrigname = name;
-}
-EXPORT_SYMBOL(rfkill_set_led_trigger_name);
-
 static int rfkill_led_trigger_register(struct rfkill *rfkill)
 {
 	rfkill->led_trigger.name = rfkill->ledtrigname
diff --git a/net/rxrpc/Makefile b/net/rxrpc/Makefile
index c46867c61c9..d1c3429b69e 100644
--- a/net/rxrpc/Makefile
+++ b/net/rxrpc/Makefile
@@ -2,7 +2,7 @@
 # Makefile for Linux kernel RxRPC
 #
 
-af-rxrpc-objs := \
+af-rxrpc-y := \
 	af_rxrpc.o \
 	ar-accept.o \
 	ar-ack.o \
@@ -21,7 +21,7 @@ af-rxrpc-objs := \
 	ar-transport.o
 
 ifeq ($(CONFIG_PROC_FS),y)
-af-rxrpc-objs += ar-proc.o
+af-rxrpc-y += ar-proc.o
 endif
 
 obj-$(CONFIG_AF_RXRPC) += af-rxrpc.o
diff --git a/net/rxrpc/ar-peer.c b/net/rxrpc/ar-peer.c
index 9f1729bd60d..a53fb25a64e 100644
--- a/net/rxrpc/ar-peer.c
+++ b/net/rxrpc/ar-peer.c
@@ -47,12 +47,12 @@ static void rxrpc_assess_MTU_size(struct rxrpc_peer *peer)
 	case AF_INET:
 		fl.oif = 0;
 		fl.proto = IPPROTO_UDP,
-		fl.nl_u.ip4_u.saddr = 0;
-		fl.nl_u.ip4_u.daddr = peer->srx.transport.sin.sin_addr.s_addr;
-		fl.nl_u.ip4_u.tos = 0;
+		fl.fl4_dst = peer->srx.transport.sin.sin_addr.s_addr;
+		fl.fl4_src = 0;
+		fl.fl4_tos = 0;
 		/* assume AFS.CM talking to AFS.FS */
-		fl.uli_u.ports.sport = htons(7001);
-		fl.uli_u.ports.dport = htons(7000);
+		fl.fl_ip_sport = htons(7001);
+		fl.fl_ip_dport = htons(7000);
 		break;
 	default:
 		BUG();
diff --git a/net/sched/sch_fifo.c b/net/sched/sch_fifo.c
index 4dfecb0cba3..aa4d6337e43 100644
--- a/net/sched/sch_fifo.c
+++ b/net/sched/sch_fifo.c
@@ -54,8 +54,6 @@ static int pfifo_tail_enqueue(struct sk_buff *skb, struct Qdisc* sch)
 
 	/* queue full, remove one skb to fulfill the limit */
 	skb_head = qdisc_dequeue_head(sch);
-	sch->bstats.bytes -= qdisc_pkt_len(skb_head);
-	sch->bstats.packets--;
 	sch->qstats.drops++;
 	kfree_skb(skb_head);
 
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 5dbb3cd96e5..34dc598440a 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -60,8 +60,7 @@ static inline struct sk_buff *dequeue_skb(struct Qdisc *q)
 
 		/* check the reason of requeuing without tx lock first */
 		txq = netdev_get_tx_queue(dev, skb_get_queue_mapping(skb));
-		if (!netif_tx_queue_stopped(txq) &&
-		    !netif_tx_queue_frozen(txq)) {
+		if (!netif_tx_queue_frozen_or_stopped(txq)) {
 			q->gso_skb = NULL;
 			q->q.qlen--;
 		} else
@@ -122,7 +121,7 @@ int sch_direct_xmit(struct sk_buff *skb, struct Qdisc *q,
 	spin_unlock(root_lock);
 
 	HARD_TX_LOCK(dev, txq, smp_processor_id());
-	if (!netif_tx_queue_stopped(txq) && !netif_tx_queue_frozen(txq))
+	if (!netif_tx_queue_frozen_or_stopped(txq))
 		ret = dev_hard_start_xmit(skb, dev, txq);
 
 	HARD_TX_UNLOCK(dev, txq);
@@ -144,8 +143,7 @@ int sch_direct_xmit(struct sk_buff *skb, struct Qdisc *q,
 		ret = dev_requeue_skb(skb, q);
 	}
 
-	if (ret && (netif_tx_queue_stopped(txq) ||
-		    netif_tx_queue_frozen(txq)))
+	if (ret && netif_tx_queue_frozen_or_stopped(txq))
 		ret = 0;
 
 	return ret;
@@ -555,7 +553,9 @@ struct Qdisc *qdisc_alloc(struct netdev_queue *dev_queue,
 	size = QDISC_ALIGN(sizeof(*sch));
 	size += ops->priv_size + (QDISC_ALIGNTO - 1);
 
-	p = kzalloc(size, GFP_KERNEL);
+	p = kzalloc_node(size, GFP_KERNEL,
+			 netdev_queue_numa_node_read(dev_queue));
+
 	if (!p)
 		goto errout;
 	sch = (struct Qdisc *) QDISC_ALIGN((unsigned long) p);
@@ -810,20 +810,35 @@ static bool some_qdisc_is_busy(struct net_device *dev)
 	return false;
 }
 
-void dev_deactivate(struct net_device *dev)
+void dev_deactivate_many(struct list_head *head)
 {
-	netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc);
-	if (dev_ingress_queue(dev))
-		dev_deactivate_queue(dev, dev_ingress_queue(dev), &noop_qdisc);
+	struct net_device *dev;
+
+	list_for_each_entry(dev, head, unreg_list) {
+		netdev_for_each_tx_queue(dev, dev_deactivate_queue,
+					 &noop_qdisc);
+		if (dev_ingress_queue(dev))
+			dev_deactivate_queue(dev, dev_ingress_queue(dev),
+					     &noop_qdisc);
 
-	dev_watchdog_down(dev);
+		dev_watchdog_down(dev);
+	}
 
 	/* Wait for outstanding qdisc-less dev_queue_xmit calls. */
 	synchronize_rcu();
 
 	/* Wait for outstanding qdisc_run calls. */
-	while (some_qdisc_is_busy(dev))
-		yield();
+	list_for_each_entry(dev, head, unreg_list)
+		while (some_qdisc_is_busy(dev))
+			yield();
+}
+
+void dev_deactivate(struct net_device *dev)
+{
+	LIST_HEAD(single);
+
+	list_add(&dev->unreg_list, &single);
+	dev_deactivate_many(&single);
 }
 
 static void dev_init_scheduler_queue(struct net_device *dev,
diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index 8d42bb3ba54..a67ba3c5a0c 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -239,6 +239,7 @@ static int red_dump(struct Qdisc *sch, struct sk_buff *skb)
 		.Scell_log	= q->parms.Scell_log,
 	};
 
+	sch->qstats.backlog = q->qdisc->qstats.backlog;
 	opts = nla_nest_start(skb, TCA_OPTIONS);
 	if (opts == NULL)
 		goto nla_put_failure;
diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c
index 3cf478d012d..d54ac94066c 100644
--- a/net/sched/sch_sfq.c
+++ b/net/sched/sch_sfq.c
@@ -67,27 +67,47 @@
 
 	IMPLEMENTATION:
 	This implementation limits maximal queue length to 128;
-	maximal mtu to 2^15-1; number of hash buckets to 1024.
+	max mtu to 2^18-1; max 128 flows, number of hash buckets to 1024.
 	The only goal of this restrictions was that all data
-	fit into one 4K page :-). Struct sfq_sched_data is
-	organized in anti-cache manner: all the data for a bucket
-	are scattered over different locations. This is not good,
-	but it allowed me to put it into 4K.
+	fit into one 4K page on 32bit arches.
 
 	It is easy to increase these values, but not in flight.  */
 
-#define SFQ_DEPTH		128
+#define SFQ_DEPTH		128 /* max number of packets per flow */
+#define SFQ_SLOTS		128 /* max number of flows */
+#define SFQ_EMPTY_SLOT		255
 #define SFQ_HASH_DIVISOR	1024
+/* We use 16 bits to store allot, and want to handle packets up to 64K
+ * Scale allot by 8 (1<<3) so that no overflow occurs.
+ */
+#define SFQ_ALLOT_SHIFT		3
+#define SFQ_ALLOT_SIZE(X)	DIV_ROUND_UP(X, 1 << SFQ_ALLOT_SHIFT)
 
-/* This type should contain at least SFQ_DEPTH*2 values */
+/* This type should contain at least SFQ_DEPTH + SFQ_SLOTS values */
 typedef unsigned char sfq_index;
 
+/*
+ * We dont use pointers to save space.
+ * Small indexes [0 ... SFQ_SLOTS - 1] are 'pointers' to slots[] array
+ * while following values [SFQ_SLOTS ... SFQ_SLOTS + SFQ_DEPTH - 1]
+ * are 'pointers' to dep[] array
+ */
 struct sfq_head
 {
 	sfq_index	next;
 	sfq_index	prev;
 };
 
+struct sfq_slot {
+	struct sk_buff	*skblist_next;
+	struct sk_buff	*skblist_prev;
+	sfq_index	qlen; /* number of skbs in skblist */
+	sfq_index	next; /* next slot in sfq chain */
+	struct sfq_head dep; /* anchor in dep[] chains */
+	unsigned short	hash; /* hash value (index in ht[]) */
+	short		allot; /* credit for this slot */
+};
+
 struct sfq_sched_data
 {
 /* Parameters */
@@ -99,17 +119,24 @@ struct sfq_sched_data
 	struct tcf_proto *filter_list;
 	struct timer_list perturb_timer;
 	u32		perturbation;
-	sfq_index	tail;		/* Index of current slot in round */
-	sfq_index	max_depth;	/* Maximal depth */
-
+	sfq_index	cur_depth;	/* depth of longest slot */
+	unsigned short  scaled_quantum; /* SFQ_ALLOT_SIZE(quantum) */
+	struct sfq_slot *tail;		/* current slot in round */
 	sfq_index	ht[SFQ_HASH_DIVISOR];	/* Hash table */
-	sfq_index	next[SFQ_DEPTH];	/* Active slots link */
-	short		allot[SFQ_DEPTH];	/* Current allotment per slot */
-	unsigned short	hash[SFQ_DEPTH];	/* Hash value indexed by slots */
-	struct sk_buff_head	qs[SFQ_DEPTH];		/* Slot queue */
-	struct sfq_head	dep[SFQ_DEPTH*2];	/* Linked list of slots, indexed by depth */
+	struct sfq_slot	slots[SFQ_SLOTS];
+	struct sfq_head	dep[SFQ_DEPTH];	/* Linked list of slots, indexed by depth */
 };
 
+/*
+ * sfq_head are either in a sfq_slot or in dep[] array
+ */
+static inline struct sfq_head *sfq_dep_head(struct sfq_sched_data *q, sfq_index val)
+{
+	if (val < SFQ_SLOTS)
+		return &q->slots[val].dep;
+	return &q->dep[val - SFQ_SLOTS];
+}
+
 static __inline__ unsigned sfq_fold_hash(struct sfq_sched_data *q, u32 h, u32 h1)
 {
 	return jhash_2words(h, h1, q->perturbation) & (SFQ_HASH_DIVISOR - 1);
@@ -200,30 +227,41 @@ static unsigned int sfq_classify(struct sk_buff *skb, struct Qdisc *sch,
 	return 0;
 }
 
+/*
+ * x : slot number [0 .. SFQ_SLOTS - 1]
+ */
 static inline void sfq_link(struct sfq_sched_data *q, sfq_index x)
 {
 	sfq_index p, n;
-	int d = q->qs[x].qlen + SFQ_DEPTH;
+	int qlen = q->slots[x].qlen;
+
+	p = qlen + SFQ_SLOTS;
+	n = q->dep[qlen].next;
 
-	p = d;
-	n = q->dep[d].next;
-	q->dep[x].next = n;
-	q->dep[x].prev = p;
-	q->dep[p].next = q->dep[n].prev = x;
+	q->slots[x].dep.next = n;
+	q->slots[x].dep.prev = p;
+
+	q->dep[qlen].next = x;		/* sfq_dep_head(q, p)->next = x */
+	sfq_dep_head(q, n)->prev = x;
 }
 
+#define sfq_unlink(q, x, n, p)			\
+	n = q->slots[x].dep.next;		\
+	p = q->slots[x].dep.prev;		\
+	sfq_dep_head(q, p)->next = n;		\
+	sfq_dep_head(q, n)->prev = p
+
+
 static inline void sfq_dec(struct sfq_sched_data *q, sfq_index x)
 {
 	sfq_index p, n;
+	int d;
 
-	n = q->dep[x].next;
-	p = q->dep[x].prev;
-	q->dep[p].next = n;
-	q->dep[n].prev = p;
-
-	if (n == p && q->max_depth == q->qs[x].qlen + 1)
-		q->max_depth--;
+	sfq_unlink(q, x, n, p);
 
+	d = q->slots[x].qlen--;
+	if (n == p && q->cur_depth == d)
+		q->cur_depth--;
 	sfq_link(q, x);
 }
 
@@ -232,34 +270,74 @@ static inline void sfq_inc(struct sfq_sched_data *q, sfq_index x)
 	sfq_index p, n;
 	int d;
 
-	n = q->dep[x].next;
-	p = q->dep[x].prev;
-	q->dep[p].next = n;
-	q->dep[n].prev = p;
-	d = q->qs[x].qlen;
-	if (q->max_depth < d)
-		q->max_depth = d;
+	sfq_unlink(q, x, n, p);
 
+	d = ++q->slots[x].qlen;
+	if (q->cur_depth < d)
+		q->cur_depth = d;
 	sfq_link(q, x);
 }
 
+/* helper functions : might be changed when/if skb use a standard list_head */
+
+/* remove one skb from tail of slot queue */
+static inline struct sk_buff *slot_dequeue_tail(struct sfq_slot *slot)
+{
+	struct sk_buff *skb = slot->skblist_prev;
+
+	slot->skblist_prev = skb->prev;
+	skb->prev->next = (struct sk_buff *)slot;
+	skb->next = skb->prev = NULL;
+	return skb;
+}
+
+/* remove one skb from head of slot queue */
+static inline struct sk_buff *slot_dequeue_head(struct sfq_slot *slot)
+{
+	struct sk_buff *skb = slot->skblist_next;
+
+	slot->skblist_next = skb->next;
+	skb->next->prev = (struct sk_buff *)slot;
+	skb->next = skb->prev = NULL;
+	return skb;
+}
+
+static inline void slot_queue_init(struct sfq_slot *slot)
+{
+	slot->skblist_prev = slot->skblist_next = (struct sk_buff *)slot;
+}
+
+/* add skb to slot queue (tail add) */
+static inline void slot_queue_add(struct sfq_slot *slot, struct sk_buff *skb)
+{
+	skb->prev = slot->skblist_prev;
+	skb->next = (struct sk_buff *)slot;
+	slot->skblist_prev->next = skb;
+	slot->skblist_prev = skb;
+}
+
+#define	slot_queue_walk(slot, skb)		\
+	for (skb = slot->skblist_next;		\
+	     skb != (struct sk_buff *)slot;	\
+	     skb = skb->next)
+
 static unsigned int sfq_drop(struct Qdisc *sch)
 {
 	struct sfq_sched_data *q = qdisc_priv(sch);
-	sfq_index d = q->max_depth;
+	sfq_index x, d = q->cur_depth;
 	struct sk_buff *skb;
 	unsigned int len;
+	struct sfq_slot *slot;
 
-	/* Queue is full! Find the longest slot and
-	   drop a packet from it */
-
+	/* Queue is full! Find the longest slot and drop tail packet from it */
 	if (d > 1) {
-		sfq_index x = q->dep[d + SFQ_DEPTH].next;
-		skb = q->qs[x].prev;
+		x = q->dep[d].next;
+		slot = &q->slots[x];
+drop:
+		skb = slot_dequeue_tail(slot);
 		len = qdisc_pkt_len(skb);
-		__skb_unlink(skb, &q->qs[x]);
-		kfree_skb(skb);
 		sfq_dec(q, x);
+		kfree_skb(skb);
 		sch->q.qlen--;
 		sch->qstats.drops++;
 		sch->qstats.backlog -= len;
@@ -268,19 +346,11 @@ static unsigned int sfq_drop(struct Qdisc *sch)
 
 	if (d == 1) {
 		/* It is difficult to believe, but ALL THE SLOTS HAVE LENGTH 1. */
-		d = q->next[q->tail];
-		q->next[q->tail] = q->next[d];
-		q->allot[q->next[d]] += q->quantum;
-		skb = q->qs[d].prev;
-		len = qdisc_pkt_len(skb);
-		__skb_unlink(skb, &q->qs[d]);
-		kfree_skb(skb);
-		sfq_dec(q, d);
-		sch->q.qlen--;
-		q->ht[q->hash[d]] = SFQ_DEPTH;
-		sch->qstats.drops++;
-		sch->qstats.backlog -= len;
-		return len;
+		x = q->tail->next;
+		slot = &q->slots[x];
+		q->tail->next = slot->next;
+		q->ht[slot->hash] = SFQ_EMPTY_SLOT;
+		goto drop;
 	}
 
 	return 0;
@@ -292,6 +362,7 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	struct sfq_sched_data *q = qdisc_priv(sch);
 	unsigned int hash;
 	sfq_index x;
+	struct sfq_slot *slot;
 	int uninitialized_var(ret);
 
 	hash = sfq_classify(skb, sch, &ret);
@@ -304,31 +375,32 @@ sfq_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	hash--;
 
 	x = q->ht[hash];
-	if (x == SFQ_DEPTH) {
-		q->ht[hash] = x = q->dep[SFQ_DEPTH].next;
-		q->hash[x] = hash;
+	slot = &q->slots[x];
+	if (x == SFQ_EMPTY_SLOT) {
+		x = q->dep[0].next; /* get a free slot */
+		q->ht[hash] = x;
+		slot = &q->slots[x];
+		slot->hash = hash;
 	}
 
-	/* If selected queue has length q->limit, this means that
-	 * all another queues are empty and that we do simple tail drop,
+	/* If selected queue has length q->limit, do simple tail drop,
 	 * i.e. drop _this_ packet.
 	 */
-	if (q->qs[x].qlen >= q->limit)
+	if (slot->qlen >= q->limit)
 		return qdisc_drop(skb, sch);
 
 	sch->qstats.backlog += qdisc_pkt_len(skb);
-	__skb_queue_tail(&q->qs[x], skb);
+	slot_queue_add(slot, skb);
 	sfq_inc(q, x);
-	if (q->qs[x].qlen == 1) {		/* The flow is new */
-		if (q->tail == SFQ_DEPTH) {	/* It is the first flow */
-			q->tail = x;
-			q->next[x] = x;
-			q->allot[x] = q->quantum;
+	if (slot->qlen == 1) {		/* The flow is new */
+		if (q->tail == NULL) {	/* It is the first flow */
+			slot->next = x;
 		} else {
-			q->next[x] = q->next[q->tail];
-			q->next[q->tail] = x;
-			q->tail = x;
+			slot->next = q->tail->next;
+			q->tail->next = x;
 		}
+		q->tail = slot;
+		slot->allot = q->scaled_quantum;
 	}
 	if (++sch->q.qlen <= q->limit) {
 		sch->bstats.bytes += qdisc_pkt_len(skb);
@@ -344,14 +416,12 @@ static struct sk_buff *
 sfq_peek(struct Qdisc *sch)
 {
 	struct sfq_sched_data *q = qdisc_priv(sch);
-	sfq_index a;
 
 	/* No active slots */
-	if (q->tail == SFQ_DEPTH)
+	if (q->tail == NULL)
 		return NULL;
 
-	a = q->next[q->tail];
-	return skb_peek(&q->qs[a]);
+	return q->slots[q->tail->next].skblist_next;
 }
 
 static struct sk_buff *
@@ -359,34 +429,37 @@ sfq_dequeue(struct Qdisc *sch)
 {
 	struct sfq_sched_data *q = qdisc_priv(sch);
 	struct sk_buff *skb;
-	sfq_index a, old_a;
+	sfq_index a, next_a;
+	struct sfq_slot *slot;
 
 	/* No active slots */
-	if (q->tail == SFQ_DEPTH)
+	if (q->tail == NULL)
 		return NULL;
 
-	a = old_a = q->next[q->tail];
-
-	/* Grab packet */
-	skb = __skb_dequeue(&q->qs[a]);
+next_slot:
+	a = q->tail->next;
+	slot = &q->slots[a];
+	if (slot->allot <= 0) {
+		q->tail = slot;
+		slot->allot += q->scaled_quantum;
+		goto next_slot;
+	}
+	skb = slot_dequeue_head(slot);
 	sfq_dec(q, a);
 	sch->q.qlen--;
 	sch->qstats.backlog -= qdisc_pkt_len(skb);
 
 	/* Is the slot empty? */
-	if (q->qs[a].qlen == 0) {
-		q->ht[q->hash[a]] = SFQ_DEPTH;
-		a = q->next[a];
-		if (a == old_a) {
-			q->tail = SFQ_DEPTH;
+	if (slot->qlen == 0) {
+		q->ht[slot->hash] = SFQ_EMPTY_SLOT;
+		next_a = slot->next;
+		if (a == next_a) {
+			q->tail = NULL; /* no more active slots */
 			return skb;
 		}
-		q->next[q->tail] = a;
-		q->allot[a] += q->quantum;
-	} else if ((q->allot[a] -= qdisc_pkt_len(skb)) <= 0) {
-		q->tail = a;
-		a = q->next[a];
-		q->allot[a] += q->quantum;
+		q->tail->next = next_a;
+	} else {
+		slot->allot -= SFQ_ALLOT_SIZE(qdisc_pkt_len(skb));
 	}
 	return skb;
 }
@@ -422,6 +495,7 @@ static int sfq_change(struct Qdisc *sch, struct nlattr *opt)
 
 	sch_tree_lock(sch);
 	q->quantum = ctl->quantum ? : psched_mtu(qdisc_dev(sch));
+	q->scaled_quantum = SFQ_ALLOT_SIZE(q->quantum);
 	q->perturb_period = ctl->perturb_period * HZ;
 	if (ctl->limit)
 		q->limit = min_t(u32, ctl->limit, SFQ_DEPTH - 1);
@@ -450,19 +524,19 @@ static int sfq_init(struct Qdisc *sch, struct nlattr *opt)
 	init_timer_deferrable(&q->perturb_timer);
 
 	for (i = 0; i < SFQ_HASH_DIVISOR; i++)
-		q->ht[i] = SFQ_DEPTH;
+		q->ht[i] = SFQ_EMPTY_SLOT;
 
 	for (i = 0; i < SFQ_DEPTH; i++) {
-		skb_queue_head_init(&q->qs[i]);
-		q->dep[i + SFQ_DEPTH].next = i + SFQ_DEPTH;
-		q->dep[i + SFQ_DEPTH].prev = i + SFQ_DEPTH;
+		q->dep[i].next = i + SFQ_SLOTS;
+		q->dep[i].prev = i + SFQ_SLOTS;
 	}
 
 	q->limit = SFQ_DEPTH - 1;
-	q->max_depth = 0;
-	q->tail = SFQ_DEPTH;
+	q->cur_depth = 0;
+	q->tail = NULL;
 	if (opt == NULL) {
 		q->quantum = psched_mtu(qdisc_dev(sch));
+		q->scaled_quantum = SFQ_ALLOT_SIZE(q->quantum);
 		q->perturb_period = 0;
 		q->perturbation = net_random();
 	} else {
@@ -471,8 +545,10 @@ static int sfq_init(struct Qdisc *sch, struct nlattr *opt)
 			return err;
 	}
 
-	for (i = 0; i < SFQ_DEPTH; i++)
+	for (i = 0; i < SFQ_SLOTS; i++) {
+		slot_queue_init(&q->slots[i]);
 		sfq_link(q, i);
+	}
 	return 0;
 }
 
@@ -547,10 +623,19 @@ static int sfq_dump_class_stats(struct Qdisc *sch, unsigned long cl,
 				struct gnet_dump *d)
 {
 	struct sfq_sched_data *q = qdisc_priv(sch);
-	sfq_index idx = q->ht[cl-1];
-	struct gnet_stats_queue qs = { .qlen = q->qs[idx].qlen };
-	struct tc_sfq_xstats xstats = { .allot = q->allot[idx] };
+	sfq_index idx = q->ht[cl - 1];
+	struct gnet_stats_queue qs = { 0 };
+	struct tc_sfq_xstats xstats = { 0 };
+	struct sk_buff *skb;
+
+	if (idx != SFQ_EMPTY_SLOT) {
+		const struct sfq_slot *slot = &q->slots[idx];
 
+		xstats.allot = slot->allot << SFQ_ALLOT_SHIFT;
+		qs.qlen = slot->qlen;
+		slot_queue_walk(slot, skb)
+			qs.backlog += qdisc_pkt_len(skb);
+	}
 	if (gnet_stats_copy_queue(d, &qs) < 0)
 		return -1;
 	return gnet_stats_copy_app(d, &xstats, sizeof(xstats));
@@ -565,7 +650,7 @@ static void sfq_walk(struct Qdisc *sch, struct qdisc_walker *arg)
 		return;
 
 	for (i = 0; i < SFQ_HASH_DIVISOR; i++) {
-		if (q->ht[i] == SFQ_DEPTH ||
+		if (q->ht[i] == SFQ_EMPTY_SLOT ||
 		    arg->count < arg->skip) {
 			arg->count++;
 			continue;
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 401af959670..106479a7c94 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -309,8 +309,7 @@ restart:
 			if (__netif_tx_trylock(slave_txq)) {
 				unsigned int length = qdisc_pkt_len(skb);
 
-				if (!netif_tx_queue_stopped(slave_txq) &&
-				    !netif_tx_queue_frozen(slave_txq) &&
+				if (!netif_tx_queue_frozen_or_stopped(slave_txq) &&
 				    slave_ops->ndo_start_xmit(skb, slave) == NETDEV_TX_OK) {
 					txq_trans_update(slave_txq);
 					__netif_tx_unlock(slave_txq);
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 1ef29c74d85..e58f9476f29 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -92,7 +92,7 @@ static struct sctp_af *sctp_af_v6_specific;
 struct kmem_cache *sctp_chunk_cachep __read_mostly;
 struct kmem_cache *sctp_bucket_cachep __read_mostly;
 
-int sysctl_sctp_mem[3];
+long sysctl_sctp_mem[3];
 int sysctl_sctp_rmem[3];
 int sysctl_sctp_wmem[3];
 
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index e34ca9cc116..a09b0dd25f5 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -111,12 +111,12 @@ static void sctp_sock_migrate(struct sock *, struct sock *,
 static char *sctp_hmac_alg = SCTP_COOKIE_HMAC_ALG;
 
 extern struct kmem_cache *sctp_bucket_cachep;
-extern int sysctl_sctp_mem[3];
+extern long sysctl_sctp_mem[3];
 extern int sysctl_sctp_rmem[3];
 extern int sysctl_sctp_wmem[3];
 
 static int sctp_memory_pressure;
-static atomic_t sctp_memory_allocated;
+static atomic_long_t sctp_memory_allocated;
 struct percpu_counter sctp_sockets_allocated;
 
 static void sctp_enter_memory_pressure(struct sock *sk)
@@ -2932,6 +2932,7 @@ static int sctp_setsockopt_peer_primary_addr(struct sock *sk, char __user *optva
 	struct sctp_association	*asoc = NULL;
 	struct sctp_setpeerprim	prim;
 	struct sctp_chunk	*chunk;
+	struct sctp_af		*af;
 	int 			err;
 
 	sp = sctp_sk(sk);
@@ -2959,6 +2960,13 @@ static int sctp_setsockopt_peer_primary_addr(struct sock *sk, char __user *optva
 	if (!sctp_state(asoc, ESTABLISHED))
 		return -ENOTCONN;
 
+	af = sctp_get_af_specific(prim.sspp_addr.ss_family);
+	if (!af)
+		return -EINVAL;
+
+	if (!af->addr_valid((union sctp_addr *)&prim.sspp_addr, sp, NULL))
+		return -EADDRNOTAVAIL;
+
 	if (!sctp_assoc_lookup_laddr(asoc, (union sctp_addr *)&prim.sspp_addr))
 		return -EADDRNOTAVAIL;
 
@@ -5045,7 +5053,7 @@ static int sctp_getsockopt_partial_delivery_point(struct sock *sk, int len,
 	if (copy_to_user(optval, &val, len))
 		return -EFAULT;
 
-	return -ENOTSUPP;
+	return 0;
 }
 
 /*
@@ -6047,7 +6055,7 @@ static struct sk_buff *sctp_skb_recv_datagram(struct sock *sk, int flags,
 		 * will suddenly eat the receive_queue.
 		 *
 		 *  Look at current nfs client by the way...
-		 *  However, this function was corrent in any case. 8)
+		 *  However, this function was correct in any case. 8)
 		 */
 		if (flags & MSG_PEEK) {
 			spin_lock_bh(&sk->sk_receive_queue.lock);
diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c
index 832590bbe0c..50cb57f0919 100644
--- a/net/sctp/sysctl.c
+++ b/net/sctp/sysctl.c
@@ -54,7 +54,7 @@ static int sack_timer_max = 500;
 static int addr_scope_max = 3; /* check sctp_scope_policy_t in include/net/sctp/constants.h for max entries */
 static int rwnd_scale_max = 16;
 
-extern int sysctl_sctp_mem[3];
+extern long sysctl_sctp_mem[3];
 extern int sysctl_sctp_rmem[3];
 extern int sysctl_sctp_wmem[3];
 
@@ -203,7 +203,7 @@ static ctl_table sctp_table[] = {
 		.data		= &sysctl_sctp_mem,
 		.maxlen		= sizeof(sysctl_sctp_mem),
 		.mode		= 0644,
-		.proc_handler	= proc_dointvec,
+		.proc_handler	= proc_doulongvec_minmax
 	},
 	{
 		.procname	= "sctp_rmem",
diff --git a/net/socket.c b/net/socket.c
index 3ca2fd9e372..ccc576a6a50 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -156,7 +156,7 @@ static const struct file_operations socket_file_ops = {
  */
 
 static DEFINE_SPINLOCK(net_family_lock);
-static const struct net_proto_family *net_families[NPROTO] __read_mostly;
+static const struct net_proto_family __rcu *net_families[NPROTO] __read_mostly;
 
 /*
  *	Statistics counters of the socket lists
@@ -262,6 +262,7 @@ static struct inode *sock_alloc_inode(struct super_block *sb)
 }
 
 
+
 static void wq_free_rcu(struct rcu_head *head)
 {
 	struct socket_wq *wq = container_of(head, struct socket_wq, rcu);
@@ -360,14 +361,14 @@ static int sock_alloc_file(struct socket *sock, struct file **f, int flags)
 	if (unlikely(fd < 0))
 		return fd;
 
-	path.dentry = d_alloc(sock_mnt->mnt_sb->s_root, &name);
+	path.dentry = d_alloc_pseudo(sock_mnt->mnt_sb, &name);
 	if (unlikely(!path.dentry)) {
 		put_unused_fd(fd);
 		return -ENOMEM;
 	}
 	path.mnt = mntget(sock_mnt);
 
-	path.dentry->d_op = &sockfs_dentry_operations;
+	d_set_d_op(path.dentry, &sockfs_dentry_operations);
 	d_instantiate(path.dentry, SOCK_INODE(sock));
 	SOCK_INODE(sock)->i_fop = &socket_file_ops;
 
@@ -732,6 +733,21 @@ static int sock_recvmsg_nosec(struct socket *sock, struct msghdr *msg,
 	return ret;
 }
 
+/**
+ * kernel_recvmsg - Receive a message from a socket (kernel space)
+ * @sock:       The socket to receive the message from
+ * @msg:        Received message
+ * @vec:        Input s/g array for message data
+ * @num:        Size of input s/g array
+ * @size:       Number of bytes to read
+ * @flags:      Message flags (MSG_DONTWAIT, etc...)
+ *
+ * On return the msg structure contains the scatter/gather array passed in the
+ * vec argument. The array is modified so that it consists of the unfilled
+ * portion of the original array.
+ *
+ * The returned value is the total number of bytes received, or an error.
+ */
 int kernel_recvmsg(struct socket *sock, struct msghdr *msg,
 		   struct kvec *vec, size_t num, size_t size, int flags)
 {
@@ -1200,7 +1216,7 @@ int __sock_create(struct net *net, int family, int type, int protocol,
 	 * requested real, full-featured networking support upon configuration.
 	 * Otherwise module support will break!
 	 */
-	if (net_families[family] == NULL)
+	if (rcu_access_pointer(net_families[family]) == NULL)
 		request_module("net-pf-%d", family);
 #endif
 
@@ -2332,10 +2348,11 @@ int sock_register(const struct net_proto_family *ops)
 	}
 
 	spin_lock(&net_family_lock);
-	if (net_families[ops->family])
+	if (rcu_dereference_protected(net_families[ops->family],
+				      lockdep_is_held(&net_family_lock)))
 		err = -EEXIST;
 	else {
-		net_families[ops->family] = ops;
+		rcu_assign_pointer(net_families[ops->family], ops);
 		err = 0;
 	}
 	spin_unlock(&net_family_lock);
@@ -2363,7 +2380,7 @@ void sock_unregister(int family)
 	BUG_ON(family < 0 || family >= NPROTO);
 
 	spin_lock(&net_family_lock);
-	net_families[family] = NULL;
+	rcu_assign_pointer(net_families[family], NULL);
 	spin_unlock(&net_family_lock);
 
 	synchronize_rcu();
@@ -2374,6 +2391,8 @@ EXPORT_SYMBOL(sock_unregister);
 
 static int __init sock_init(void)
 {
+	int err;
+
 	/*
 	 *      Initialize sock SLAB cache.
 	 */
@@ -2390,8 +2409,15 @@ static int __init sock_init(void)
 	 */
 
 	init_inodecache();
-	register_filesystem(&sock_fs_type);
+
+	err = register_filesystem(&sock_fs_type);
+	if (err)
+		goto out_fs;
 	sock_mnt = kern_mount(&sock_fs_type);
+	if (IS_ERR(sock_mnt)) {
+		err = PTR_ERR(sock_mnt);
+		goto out_mount;
+	}
 
 	/* The real protocol initialization is performed in later initcalls.
 	 */
@@ -2404,7 +2430,13 @@ static int __init sock_init(void)
 	skb_timestamping_init();
 #endif
 
-	return 0;
+out:
+	return err;
+
+out_mount:
+	unregister_filesystem(&sock_fs_type);
+out_fs:
+	goto out;
 }
 
 core_initcall(sock_init);	/* early initcall */
diff --git a/net/sunrpc/auth_gss/Makefile b/net/sunrpc/auth_gss/Makefile
index 7350d86a32e..9e4cb59ef9f 100644
--- a/net/sunrpc/auth_gss/Makefile
+++ b/net/sunrpc/auth_gss/Makefile
@@ -4,10 +4,10 @@
 
 obj-$(CONFIG_SUNRPC_GSS) += auth_rpcgss.o
 
-auth_rpcgss-objs := auth_gss.o gss_generic_token.o \
+auth_rpcgss-y := auth_gss.o gss_generic_token.o \
 	gss_mech_switch.o svcauth_gss.o
 
 obj-$(CONFIG_RPCSEC_GSS_KRB5) += rpcsec_gss_krb5.o
 
-rpcsec_gss_krb5-objs := gss_krb5_mech.o gss_krb5_seal.o gss_krb5_unseal.o \
+rpcsec_gss_krb5-y := gss_krb5_mech.o gss_krb5_seal.o gss_krb5_unseal.o \
 	gss_krb5_seqnum.o gss_krb5_wrap.o gss_krb5_crypto.o gss_krb5_keys.o
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 9dab9573be4..92ce94f5146 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -989,20 +989,26 @@ call_refreshresult(struct rpc_task *task)
 	dprint_status(task);
 
 	task->tk_status = 0;
-	task->tk_action = call_allocate;
-	if (status >= 0 && rpcauth_uptodatecred(task))
-		return;
+	task->tk_action = call_refresh;
 	switch (status) {
-	case -EACCES:
-		rpc_exit(task, -EACCES);
-		return;
-	case -ENOMEM:
-		rpc_exit(task, -ENOMEM);
+	case 0:
+		if (rpcauth_uptodatecred(task))
+			task->tk_action = call_allocate;
 		return;
 	case -ETIMEDOUT:
 		rpc_delay(task, 3*HZ);
+	case -EAGAIN:
+		status = -EACCES;
+		if (!task->tk_cred_retry)
+			break;
+		task->tk_cred_retry--;
+		dprintk("RPC: %5u %s: retry refresh creds\n",
+				task->tk_pid, __func__);
+		return;
 	}
-	task->tk_action = call_refresh;
+	dprintk("RPC: %5u %s: refresh creds failed with error %d\n",
+				task->tk_pid, __func__, status);
+	rpc_exit(task, status);
 }
 
 /*
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index 10a17a37ec4..09f01f41e55 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -162,11 +162,19 @@ rpc_alloc_inode(struct super_block *sb)
 }
 
 static void
-rpc_destroy_inode(struct inode *inode)
+rpc_i_callback(struct rcu_head *head)
 {
+	struct inode *inode = container_of(head, struct inode, i_rcu);
+	INIT_LIST_HEAD(&inode->i_dentry);
 	kmem_cache_free(rpc_inode_cachep, RPC_I(inode));
 }
 
+static void
+rpc_destroy_inode(struct inode *inode)
+{
+	call_rcu(&inode->i_rcu, rpc_i_callback);
+}
+
 static int
 rpc_pipe_open(struct inode *inode, struct file *filp)
 {
@@ -430,7 +438,7 @@ void rpc_put_mount(void)
 }
 EXPORT_SYMBOL_GPL(rpc_put_mount);
 
-static int rpc_delete_dentry(struct dentry *dentry)
+static int rpc_delete_dentry(const struct dentry *dentry)
 {
 	return 1;
 }
@@ -583,7 +591,7 @@ static struct dentry *__rpc_lookup_create(struct dentry *parent,
 		}
 	}
 	if (!dentry->d_inode)
-		dentry->d_op = &rpc_dentry_operations;
+		d_set_d_op(dentry, &rpc_dentry_operations);
 out_err:
 	return dentry;
 }
diff --git a/net/sunrpc/stats.c b/net/sunrpc/stats.c
index f71a73107ae..80df89d957b 100644
--- a/net/sunrpc/stats.c
+++ b/net/sunrpc/stats.c
@@ -115,9 +115,7 @@ EXPORT_SYMBOL_GPL(svc_seq_show);
  */
 struct rpc_iostats *rpc_alloc_iostats(struct rpc_clnt *clnt)
 {
-	struct rpc_iostats *new;
-	new = kcalloc(clnt->cl_maxproc, sizeof(struct rpc_iostats), GFP_KERNEL);
-	return new;
+	return kcalloc(clnt->cl_maxproc, sizeof(struct rpc_iostats), GFP_KERNEL);
 }
 EXPORT_SYMBOL_GPL(rpc_alloc_iostats);
 
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index c82fe739fbd..3f2c5559ca1 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -5,7 +5,6 @@
  */
 
 #include <linux/sched.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/freezer.h>
 #include <linux/kthread.h>
@@ -213,6 +212,7 @@ int svc_create_xprt(struct svc_serv *serv, const char *xprt_name,
 	spin_lock(&svc_xprt_class_lock);
 	list_for_each_entry(xcl, &svc_xprt_class_list, xcl_list) {
 		struct svc_xprt *newxprt;
+		unsigned short newport;
 
 		if (strcmp(xprt_name, xcl->xcl_name))
 			continue;
@@ -231,8 +231,9 @@ int svc_create_xprt(struct svc_serv *serv, const char *xprt_name,
 		spin_lock_bh(&serv->sv_lock);
 		list_add(&newxprt->xpt_list, &serv->sv_permsocks);
 		spin_unlock_bh(&serv->sv_lock);
+		newport = svc_xprt_local_port(newxprt);
 		clear_bit(XPT_BUSY, &newxprt->xpt_flags);
-		return svc_xprt_local_port(newxprt);
+		return newport;
 	}
  err:
 	spin_unlock(&svc_xprt_class_lock);
@@ -426,8 +427,13 @@ void svc_xprt_received(struct svc_xprt *xprt)
 {
 	BUG_ON(!test_bit(XPT_BUSY, &xprt->xpt_flags));
 	xprt->xpt_pool = NULL;
+	/* As soon as we clear busy, the xprt could be closed and
+	 * 'put', so we need a reference to call svc_xprt_enqueue with:
+	 */
+	svc_xprt_get(xprt);
 	clear_bit(XPT_BUSY, &xprt->xpt_flags);
 	svc_xprt_enqueue(xprt);
+	svc_xprt_put(xprt);
 }
 EXPORT_SYMBOL_GPL(svc_xprt_received);
 
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index dfcab5ac65a..96549df836e 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -770,7 +770,7 @@ static void xs_destroy(struct rpc_xprt *xprt)
 
 	dprintk("RPC:       xs_destroy xprt %p\n", xprt);
 
-	cancel_rearming_delayed_work(&transport->connect_worker);
+	cancel_delayed_work_sync(&transport->connect_worker);
 
 	xs_close(xprt);
 	xs_free_peer_addresses(xprt);
diff --git a/net/tipc/Kconfig b/net/tipc/Kconfig
index b74f78d0c03..0436927369f 100644
--- a/net/tipc/Kconfig
+++ b/net/tipc/Kconfig
@@ -29,28 +29,6 @@ config TIPC_ADVANCED
 	  Saying Y here will open some advanced configuration for TIPC.
 	  Most users do not need to bother; if unsure, just say N.
 
-config TIPC_ZONES
-	int "Maximum number of zones in a network"
-	depends on TIPC_ADVANCED
-	range 1 255
-	default "3"
-	help
-	  Specifies how many zones can be supported in a TIPC network.
-	  Can range from 1 to 255 zones; default is 3.
-
-	  Setting this to a smaller value saves some memory;
-	  setting it to a higher value allows for more zones.
-
-config TIPC_CLUSTERS
-	int "Maximum number of clusters in a zone"
-	depends on TIPC_ADVANCED
-	range 1 1
-	default "1"
-	help
-	  Specifies how many clusters can be supported in a TIPC zone.
-
-	  *** Currently TIPC only supports a single cluster per zone. ***
-
 config TIPC_NODES
 	int "Maximum number of nodes in a cluster"
 	depends on TIPC_ADVANCED
@@ -72,7 +50,7 @@ config TIPC_PORTS
 	  Specifies how many ports can be supported by a node.
 	  Can range from 127 to 65535 ports; default is 8191.
 
-	  Setting this to a smaller value saves some memory, 
+	  Setting this to a smaller value saves some memory,
 	  setting it to higher allows for more ports.
 
 config TIPC_LOG
@@ -89,12 +67,15 @@ config TIPC_LOG
 	  managed remotely via TIPC.
 
 config TIPC_DEBUG
-	bool "Enable debug messages"
+	bool "Enable debugging support"
 	default n
 	help
-	  This enables debugging of TIPC.
+	  Saying Y here enables TIPC debugging capabilities used by developers.
+	  Most users do not need to bother; if unsure, just say N.
 
-	  Only say Y here if you are having trouble with TIPC.  It will
-	  enable the display of detailed information about what is going on.
+	  Enabling debugging support causes TIPC to display data about its
+	  internal state when certain abnormal conditions occur. It also
+	  makes it easy for developers to capture additional information of
+	  interest using the dbg() or msg_dbg() macros.
 
 endif # TIPC
diff --git a/net/tipc/Makefile b/net/tipc/Makefile
index dceb7027946..521d24d04ab 100644
--- a/net/tipc/Makefile
+++ b/net/tipc/Makefile
@@ -4,10 +4,10 @@
 
 obj-$(CONFIG_TIPC) := tipc.o
 
-tipc-y	+= addr.o bcast.o bearer.o config.o cluster.o \
+tipc-y	+= addr.o bcast.o bearer.o config.o \
 	   core.o handler.o link.o discover.o msg.o  \
 	   name_distr.o  subscr.o name_table.o net.o  \
 	   netlink.o node.o node_subscr.o port.o ref.o  \
-	   socket.o user_reg.o zone.o dbg.o eth_media.o
+	   socket.o log.o eth_media.o
 
 # End of file
diff --git a/net/tipc/addr.c b/net/tipc/addr.c
index 8a2e89bffde..88463d9a6f1 100644
--- a/net/tipc/addr.c
+++ b/net/tipc/addr.c
@@ -35,11 +35,7 @@
  */
 
 #include "core.h"
-#include "dbg.h"
 #include "addr.h"
-#include "zone.h"
-#include "cluster.h"
-#include "net.h"
 
 /**
  * tipc_addr_domain_valid - validates a network domain address
@@ -57,14 +53,8 @@ int tipc_addr_domain_valid(u32 addr)
 	u32 z = tipc_zone(addr);
 	u32 max_nodes = tipc_max_nodes;
 
-	if (is_slave(addr))
-		max_nodes = LOWEST_SLAVE + tipc_max_slaves;
 	if (n > max_nodes)
 		return 0;
-	if (c > tipc_max_clusters)
-		return 0;
-	if (z > tipc_max_zones)
-		return 0;
 
 	if (n && (!z || !c))
 		return 0;
diff --git a/net/tipc/addr.h b/net/tipc/addr.h
index c1cc5724d8c..2490fadd0ca 100644
--- a/net/tipc/addr.h
+++ b/net/tipc/addr.h
@@ -37,36 +37,11 @@
 #ifndef _TIPC_ADDR_H
 #define _TIPC_ADDR_H
 
-static inline u32 own_node(void)
-{
-	return tipc_node(tipc_own_addr);
-}
-
-static inline u32 own_cluster(void)
-{
-	return tipc_cluster(tipc_own_addr);
-}
-
-static inline u32 own_zone(void)
-{
-	return tipc_zone(tipc_own_addr);
-}
-
 static inline int in_own_cluster(u32 addr)
 {
 	return !((addr ^ tipc_own_addr) >> 12);
 }
 
-static inline int is_slave(u32 addr)
-{
-	return addr & 0x800;
-}
-
-static inline int may_route(u32 addr)
-{
-	return(addr ^ tipc_own_addr) >> 11;
-}
-
 /**
  * addr_domain - convert 2-bit scope value to equivalent message lookup domain
  *
diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c
index 22a60fc9839..70ab5ef4876 100644
--- a/net/tipc/bcast.c
+++ b/net/tipc/bcast.c
@@ -36,25 +36,14 @@
  */
 
 #include "core.h"
-#include "msg.h"
-#include "dbg.h"
 #include "link.h"
-#include "net.h"
-#include "node.h"
 #include "port.h"
-#include "addr.h"
-#include "node_subscr.h"
-#include "name_distr.h"
-#include "bearer.h"
-#include "name_table.h"
 #include "bcast.h"
 
 #define MAX_PKT_DEFAULT_MCAST 1500	/* bcast link max packet size (fixed) */
 
 #define BCLINK_WIN_DEFAULT 20		/* bcast link window size (default) */
 
-#define BCLINK_LOG_BUF_SIZE 0
-
 /*
  * Loss rate for incoming broadcast frames; used to test retransmission code.
  * Set to N to cause every N'th frame to be discarded; 0 => don't discard any.
@@ -114,11 +103,14 @@ struct bclink {
 };
 
 
-static struct bcbearer *bcbearer = NULL;
-static struct bclink *bclink = NULL;
-static struct link *bcl = NULL;
+static struct bcbearer *bcbearer;
+static struct bclink *bclink;
+static struct link *bcl;
 static DEFINE_SPINLOCK(bc_lock);
 
+/* broadcast-capable node map */
+struct tipc_node_map tipc_bcast_nmap;
+
 const char tipc_bclink_name[] = "broadcast-link";
 
 static void tipc_nmap_diff(struct tipc_node_map *nm_a,
@@ -204,9 +196,8 @@ static void bclink_retransmit_pkt(u32 after, u32 to)
 	struct sk_buff *buf;
 
 	buf = bcl->first_out;
-	while (buf && less_eq(buf_seqno(buf), after)) {
+	while (buf && less_eq(buf_seqno(buf), after))
 		buf = buf->next;
-	}
 	tipc_link_retransmit(bcl, buf, mod(to - after));
 }
 
@@ -232,9 +223,8 @@ void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked)
 	/* Skip over packets that node has previously acknowledged */
 
 	crs = bcl->first_out;
-	while (crs && less_eq(buf_seqno(crs), n_ptr->bclink.acked)) {
+	while (crs && less_eq(buf_seqno(crs), n_ptr->bclink.acked))
 		crs = crs->next;
-	}
 
 	/* Update packets that node is now acknowledging */
 
@@ -433,16 +423,14 @@ int tipc_bclink_send_msg(struct sk_buff *buf)
 void tipc_bclink_recv_pkt(struct sk_buff *buf)
 {
 #if (TIPC_BCAST_LOSS_RATE)
-	static int rx_count = 0;
+	static int rx_count;
 #endif
 	struct tipc_msg *msg = buf_msg(buf);
-	struct tipc_node* node = tipc_node_find(msg_prevnode(msg));
+	struct tipc_node *node = tipc_node_find(msg_prevnode(msg));
 	u32 next_in;
 	u32 seqno;
 	struct sk_buff *deferred;
 
-	msg_dbg(msg, "<BC<<<");
-
 	if (unlikely(!node || !tipc_node_is_up(node) || !node->bclink.supported ||
 		     (msg_mc_netid(msg) != tipc_net_id))) {
 		buf_discard(buf);
@@ -450,7 +438,6 @@ void tipc_bclink_recv_pkt(struct sk_buff *buf)
 	}
 
 	if (unlikely(msg_user(msg) == BCAST_PROTOCOL)) {
-		msg_dbg(msg, "<BCNACK<<<");
 		if (msg_destnode(msg) == tipc_own_addr) {
 			tipc_node_lock(node);
 			tipc_bclink_acknowledge(node, msg_bcast_ack(msg));
@@ -574,8 +561,8 @@ static int tipc_bcbearer_send(struct sk_buff *buf,
 	if (likely(!msg_non_seq(buf_msg(buf)))) {
 		struct tipc_msg *msg;
 
-		assert(tipc_cltr_bcast_nodes.count != 0);
-		bcbuf_set_acks(buf, tipc_cltr_bcast_nodes.count);
+		assert(tipc_bcast_nmap.count != 0);
+		bcbuf_set_acks(buf, tipc_bcast_nmap.count);
 		msg = buf_msg(buf);
 		msg_set_non_seq(msg, 1);
 		msg_set_mc_netid(msg, tipc_net_id);
@@ -584,7 +571,7 @@ static int tipc_bcbearer_send(struct sk_buff *buf,
 
 	/* Send buffer over bearers until all targets reached */
 
-	bcbearer->remains = tipc_cltr_bcast_nodes;
+	bcbearer->remains = tipc_bcast_nmap;
 
 	for (bp_index = 0; bp_index < MAX_BEARERS; bp_index++) {
 		struct bearer *p = bcbearer->bpairs[bp_index].primary;
@@ -782,7 +769,6 @@ int tipc_bclink_init(void)
 	bcbearer = kzalloc(sizeof(*bcbearer), GFP_ATOMIC);
 	bclink = kzalloc(sizeof(*bclink), GFP_ATOMIC);
 	if (!bcbearer || !bclink) {
- nomem:
 		warn("Multicast link creation failed, no memory\n");
 		kfree(bcbearer);
 		bcbearer = NULL;
@@ -807,14 +793,6 @@ int tipc_bclink_init(void)
 	bcl->state = WORKING_WORKING;
 	strlcpy(bcl->name, tipc_bclink_name, TIPC_MAX_LINK_NAME);
 
-	if (BCLINK_LOG_BUF_SIZE) {
-		char *pb = kmalloc(BCLINK_LOG_BUF_SIZE, GFP_ATOMIC);
-
-		if (!pb)
-			goto nomem;
-		tipc_printbuf_init(&bcl->print_buf, pb, BCLINK_LOG_BUF_SIZE);
-	}
-
 	return 0;
 }
 
@@ -823,8 +801,6 @@ void tipc_bclink_stop(void)
 	spin_lock_bh(&bc_lock);
 	if (bcbearer) {
 		tipc_link_stop(bcl);
-		if (BCLINK_LOG_BUF_SIZE)
-			kfree(bcl->print_buf.buf);
 		bcl = NULL;
 		kfree(bclink);
 		bclink = NULL;
diff --git a/net/tipc/bcast.h b/net/tipc/bcast.h
index 011c03f0a4a..51f8c5326ce 100644
--- a/net/tipc/bcast.h
+++ b/net/tipc/bcast.h
@@ -51,6 +51,7 @@ struct tipc_node_map {
 	u32 map[MAX_NODES / WSIZE];
 };
 
+extern struct tipc_node_map tipc_bcast_nmap;
 
 #define PLSIZE 32
 
diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 9927d1d56c4..837b7a46788 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -36,17 +36,13 @@
 
 #include "core.h"
 #include "config.h"
-#include "dbg.h"
 #include "bearer.h"
-#include "link.h"
-#include "port.h"
 #include "discover.h"
-#include "bcast.h"
 
 #define MAX_ADDR_STR 32
 
 static struct media media_list[MAX_MEDIA];
-static u32 media_count = 0;
+static u32 media_count;
 
 struct bearer tipc_bearers[MAX_BEARERS];
 
@@ -167,7 +163,6 @@ int  tipc_register_media(u32 media_type,
 	m_ptr->priority = bearer_priority;
 	m_ptr->tolerance = link_tolerance;
 	m_ptr->window = send_window_limit;
-	dbg("Media <%s> registered\n", name);
 	res = 0;
 exit:
 	write_unlock_bh(&tipc_net_lock);
@@ -199,9 +194,8 @@ void tipc_media_addr_printf(struct print_buf *pb, struct tipc_media_addr *a)
 		unchar *addr = (unchar *)&a->dev_addr;
 
 		tipc_printf(pb, "UNKNOWN(%u)", media_type);
-		for (i = 0; i < (sizeof(*a) - sizeof(a->type)); i++) {
+		for (i = 0; i < (sizeof(*a) - sizeof(a->type)); i++)
 			tipc_printf(pb, "-%02x", addr[i]);
-		}
 	}
 }
 
@@ -256,7 +250,8 @@ static int bearer_name_validate(const char *name,
 	/* ensure all component parts of bearer name are present */
 
 	media_name = name_copy;
-	if ((if_name = strchr(media_name, ':')) == NULL)
+	if_name = strchr(media_name, ':');
+	if (if_name == NULL)
 		return 0;
 	*(if_name++) = 0;
 	media_len = if_name - media_name;
@@ -625,7 +620,7 @@ int tipc_block_bearer(const char *name)
  * Note: This routine assumes caller holds tipc_net_lock.
  */
 
-static int bearer_disable(struct bearer *b_ptr)
+static void bearer_disable(struct bearer *b_ptr)
 {
 	struct link *l_ptr;
 	struct link *temp_l_ptr;
@@ -641,7 +636,6 @@ static int bearer_disable(struct bearer *b_ptr)
 	}
 	spin_unlock_bh(&b_ptr->publ.lock);
 	memset(b_ptr, 0, sizeof(struct bearer));
-	return 0;
 }
 
 int tipc_disable_bearer(const char *name)
@@ -654,8 +648,10 @@ int tipc_disable_bearer(const char *name)
 	if (b_ptr == NULL) {
 		warn("Attempt to disable unknown bearer <%s>\n", name);
 		res = -EINVAL;
-	} else
-		res = bearer_disable(b_ptr);
+	} else {
+		bearer_disable(b_ptr);
+		res = 0;
+	}
 	write_unlock_bh(&tipc_net_lock);
 	return res;
 }
diff --git a/net/tipc/bearer.h b/net/tipc/bearer.h
index a850b389663..85f451d5aac 100644
--- a/net/tipc/bearer.h
+++ b/net/tipc/bearer.h
@@ -37,12 +37,50 @@
 #ifndef _TIPC_BEARER_H
 #define _TIPC_BEARER_H
 
-#include "core.h"
 #include "bcast.h"
 
 #define MAX_BEARERS 8
 #define MAX_MEDIA 4
 
+/*
+ * Identifiers of supported TIPC media types
+ */
+#define TIPC_MEDIA_TYPE_ETH	1
+
+/*
+ * Destination address structure used by TIPC bearers when sending messages
+ *
+ * IMPORTANT: The fields of this structure MUST be stored using the specified
+ * byte order indicated below, as the structure is exchanged between nodes
+ * as part of a link setup process.
+ */
+struct tipc_media_addr {
+	__be32  type;			/* bearer type (network byte order) */
+	union {
+		__u8   eth_addr[6];	/* 48 bit Ethernet addr (byte array) */
+	} dev_addr;
+};
+
+/**
+ * struct tipc_bearer - TIPC bearer info available to media code
+ * @usr_handle: pointer to additional media-specific information about bearer
+ * @mtu: max packet size bearer can support
+ * @blocked: non-zero if bearer is blocked
+ * @lock: spinlock for controlling access to bearer
+ * @addr: media-specific address associated with bearer
+ * @name: bearer name (format = media:interface)
+ *
+ * Note: TIPC initializes "name" and "lock" fields; media code is responsible
+ * for initialization all other fields when a bearer is enabled.
+ */
+struct tipc_bearer {
+	void *usr_handle;
+	u32 mtu;
+	int blocked;
+	spinlock_t lock;
+	struct tipc_media_addr addr;
+	char name[TIPC_MAX_BEARER_NAME];
+};
 
 /**
  * struct media - TIPC media information available to internal users
@@ -55,7 +93,7 @@
  * @priority: default link (and bearer) priority
  * @tolerance: default time (in ms) before declaring link failure
  * @window: default window (in packets) before declaring link congestion
- * @type_id: TIPC media identifier [defined in tipc_bearer.h]
+ * @type_id: TIPC media identifier
  * @name: media name
  */
 
@@ -116,6 +154,34 @@ struct link;
 
 extern struct bearer tipc_bearers[];
 
+/*
+ * TIPC routines available to supported media types
+ */
+int tipc_register_media(u32 media_type,
+		 char *media_name, int (*enable)(struct tipc_bearer *),
+		 void (*disable)(struct tipc_bearer *),
+		 int (*send_msg)(struct sk_buff *,
+			struct tipc_bearer *, struct tipc_media_addr *),
+		 char *(*addr2str)(struct tipc_media_addr *a,
+			char *str_buf, int str_size),
+		 struct tipc_media_addr *bcast_addr, const u32 bearer_priority,
+		 const u32 link_tolerance,  /* [ms] */
+		 const u32 send_window_limit);
+
+void tipc_recv_msg(struct sk_buff *buf, struct tipc_bearer *tb_ptr);
+
+int  tipc_block_bearer(const char *name);
+void tipc_continue(struct tipc_bearer *tb_ptr);
+
+int tipc_enable_bearer(const char *bearer_name, u32 bcast_scope, u32 priority);
+int tipc_disable_bearer(const char *name);
+
+/*
+ * Routines made available to TIPC by supported media types
+ */
+int  tipc_eth_media_start(void);
+void tipc_eth_media_stop(void);
+
 void tipc_media_addr_printf(struct print_buf *pb, struct tipc_media_addr *a);
 struct sk_buff *tipc_media_get_names(void);
 
@@ -126,7 +192,6 @@ void tipc_bearer_schedule(struct bearer *b_ptr, struct link *l_ptr);
 struct bearer *tipc_bearer_find_interface(const char *if_name);
 int tipc_bearer_resolve_congestion(struct bearer *b_ptr, struct link *l_ptr);
 int tipc_bearer_congested(struct bearer *b_ptr, struct link *l_ptr);
-int tipc_bearer_init(void);
 void tipc_bearer_stop(void);
 void tipc_bearer_lock_push(struct bearer *b_ptr);
 
diff --git a/net/tipc/cluster.c b/net/tipc/cluster.c
deleted file mode 100644
index 7fea14b98b9..00000000000
--- a/net/tipc/cluster.c
+++ /dev/null
@@ -1,557 +0,0 @@
-/*
- * net/tipc/cluster.c: TIPC cluster management routines
- *
- * Copyright (c) 2000-2006, Ericsson AB
- * Copyright (c) 2005, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "core.h"
-#include "cluster.h"
-#include "addr.h"
-#include "node_subscr.h"
-#include "link.h"
-#include "node.h"
-#include "net.h"
-#include "msg.h"
-#include "bearer.h"
-
-static void tipc_cltr_multicast(struct cluster *c_ptr, struct sk_buff *buf,
-				u32 lower, u32 upper);
-static struct sk_buff *tipc_cltr_prepare_routing_msg(u32 data_size, u32 dest);
-
-struct tipc_node **tipc_local_nodes = NULL;
-struct tipc_node_map tipc_cltr_bcast_nodes = {0,{0,}};
-u32 tipc_highest_allowed_slave = 0;
-
-struct cluster *tipc_cltr_create(u32 addr)
-{
-	struct _zone *z_ptr;
-	struct cluster *c_ptr;
-	int max_nodes;
-
-	c_ptr = kzalloc(sizeof(*c_ptr), GFP_ATOMIC);
-	if (c_ptr == NULL) {
-		warn("Cluster creation failure, no memory\n");
-		return NULL;
-	}
-
-	c_ptr->addr = tipc_addr(tipc_zone(addr), tipc_cluster(addr), 0);
-	if (in_own_cluster(addr))
-		max_nodes = LOWEST_SLAVE + tipc_max_slaves;
-	else
-		max_nodes = tipc_max_nodes + 1;
-
-	c_ptr->nodes = kcalloc(max_nodes + 1, sizeof(void*), GFP_ATOMIC);
-	if (c_ptr->nodes == NULL) {
-		warn("Cluster creation failure, no memory for node area\n");
-		kfree(c_ptr);
-		return NULL;
-	}
-
-	if (in_own_cluster(addr))
-		tipc_local_nodes = c_ptr->nodes;
-	c_ptr->highest_slave = LOWEST_SLAVE - 1;
-	c_ptr->highest_node = 0;
-
-	z_ptr = tipc_zone_find(tipc_zone(addr));
-	if (!z_ptr) {
-		z_ptr = tipc_zone_create(addr);
-	}
-	if (!z_ptr) {
-		kfree(c_ptr->nodes);
-		kfree(c_ptr);
-		return NULL;
-	}
-
-	tipc_zone_attach_cluster(z_ptr, c_ptr);
-	c_ptr->owner = z_ptr;
-	return c_ptr;
-}
-
-void tipc_cltr_delete(struct cluster *c_ptr)
-{
-	u32 n_num;
-
-	if (!c_ptr)
-		return;
-	for (n_num = 1; n_num <= c_ptr->highest_node; n_num++) {
-		tipc_node_delete(c_ptr->nodes[n_num]);
-	}
-	for (n_num = LOWEST_SLAVE; n_num <= c_ptr->highest_slave; n_num++) {
-		tipc_node_delete(c_ptr->nodes[n_num]);
-	}
-	kfree(c_ptr->nodes);
-	kfree(c_ptr);
-}
-
-
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr)
-{
-	u32 n_num = tipc_node(n_ptr->addr);
-	u32 max_n_num = tipc_max_nodes;
-
-	if (in_own_cluster(n_ptr->addr))
-		max_n_num = tipc_highest_allowed_slave;
-	assert(n_num > 0);
-	assert(n_num <= max_n_num);
-	assert(c_ptr->nodes[n_num] == NULL);
-	c_ptr->nodes[n_num] = n_ptr;
-	if (n_num > c_ptr->highest_node)
-		c_ptr->highest_node = n_num;
-}
-
-/**
- * tipc_cltr_select_router - select router to a cluster
- *
- * Uses deterministic and fair algorithm.
- */
-
-u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref)
-{
-	u32 n_num;
-	u32 ulim = c_ptr->highest_node;
-	u32 mask;
-	u32 tstart;
-
-	assert(!in_own_cluster(c_ptr->addr));
-	if (!ulim)
-		return 0;
-
-	/* Start entry must be random */
-	mask = tipc_max_nodes;
-	while (mask > ulim)
-		mask >>= 1;
-	tstart = ref & mask;
-	n_num = tstart;
-
-	/* Lookup upwards with wrap-around */
-	do {
-		if (tipc_node_is_up(c_ptr->nodes[n_num]))
-			break;
-	} while (++n_num <= ulim);
-	if (n_num > ulim) {
-		n_num = 1;
-		do {
-			if (tipc_node_is_up(c_ptr->nodes[n_num]))
-				break;
-		} while (++n_num < tstart);
-		if (n_num == tstart)
-			return 0;
-	}
-	assert(n_num <= ulim);
-	return tipc_node_select_router(c_ptr->nodes[n_num], ref);
-}
-
-/**
- * tipc_cltr_select_node - select destination node within a remote cluster
- *
- * Uses deterministic and fair algorithm.
- */
-
-struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
-{
-	u32 n_num;
-	u32 mask = tipc_max_nodes;
-	u32 start_entry;
-
-	assert(!in_own_cluster(c_ptr->addr));
-	if (!c_ptr->highest_node)
-		return NULL;
-
-	/* Start entry must be random */
-	while (mask > c_ptr->highest_node) {
-		mask >>= 1;
-	}
-	start_entry = (selector & mask) ? selector & mask : 1u;
-	assert(start_entry <= c_ptr->highest_node);
-
-	/* Lookup upwards with wrap-around */
-	for (n_num = start_entry; n_num <= c_ptr->highest_node; n_num++) {
-		if (tipc_node_has_active_links(c_ptr->nodes[n_num]))
-			return c_ptr->nodes[n_num];
-	}
-	for (n_num = 1; n_num < start_entry; n_num++) {
-		if (tipc_node_has_active_links(c_ptr->nodes[n_num]))
-			return c_ptr->nodes[n_num];
-	}
-	return NULL;
-}
-
-/*
- *    Routing table management: See description in node.c
- */
-
-static struct sk_buff *tipc_cltr_prepare_routing_msg(u32 data_size, u32 dest)
-{
-	u32 size = INT_H_SIZE + data_size;
-	struct sk_buff *buf = tipc_buf_acquire(size);
-	struct tipc_msg *msg;
-
-	if (buf) {
-		msg = buf_msg(buf);
-		memset((char *)msg, 0, size);
-		tipc_msg_init(msg, ROUTE_DISTRIBUTOR, 0, INT_H_SIZE, dest);
-	}
-	return buf;
-}
-
-void tipc_cltr_bcast_new_route(struct cluster *c_ptr, u32 dest,
-			     u32 lower, u32 upper)
-{
-	struct sk_buff *buf = tipc_cltr_prepare_routing_msg(0, c_ptr->addr);
-	struct tipc_msg *msg;
-
-	if (buf) {
-		msg = buf_msg(buf);
-		msg_set_remote_node(msg, dest);
-		msg_set_type(msg, ROUTE_ADDITION);
-		tipc_cltr_multicast(c_ptr, buf, lower, upper);
-	} else {
-		warn("Memory squeeze: broadcast of new route failed\n");
-	}
-}
-
-void tipc_cltr_bcast_lost_route(struct cluster *c_ptr, u32 dest,
-				u32 lower, u32 upper)
-{
-	struct sk_buff *buf = tipc_cltr_prepare_routing_msg(0, c_ptr->addr);
-	struct tipc_msg *msg;
-
-	if (buf) {
-		msg = buf_msg(buf);
-		msg_set_remote_node(msg, dest);
-		msg_set_type(msg, ROUTE_REMOVAL);
-		tipc_cltr_multicast(c_ptr, buf, lower, upper);
-	} else {
-		warn("Memory squeeze: broadcast of lost route failed\n");
-	}
-}
-
-void tipc_cltr_send_slave_routes(struct cluster *c_ptr, u32 dest)
-{
-	struct sk_buff *buf;
-	struct tipc_msg *msg;
-	u32 highest = c_ptr->highest_slave;
-	u32 n_num;
-	int send = 0;
-
-	assert(!is_slave(dest));
-	assert(in_own_cluster(dest));
-	assert(in_own_cluster(c_ptr->addr));
-	if (highest <= LOWEST_SLAVE)
-		return;
-	buf = tipc_cltr_prepare_routing_msg(highest - LOWEST_SLAVE + 1,
-					    c_ptr->addr);
-	if (buf) {
-		msg = buf_msg(buf);
-		msg_set_remote_node(msg, c_ptr->addr);
-		msg_set_type(msg, SLAVE_ROUTING_TABLE);
-		for (n_num = LOWEST_SLAVE; n_num <= highest; n_num++) {
-			if (c_ptr->nodes[n_num] &&
-			    tipc_node_has_active_links(c_ptr->nodes[n_num])) {
-				send = 1;
-				msg_set_dataoctet(msg, n_num);
-			}
-		}
-		if (send)
-			tipc_link_send(buf, dest, dest);
-		else
-			buf_discard(buf);
-	} else {
-		warn("Memory squeeze: broadcast of lost route failed\n");
-	}
-}
-
-void tipc_cltr_send_ext_routes(struct cluster *c_ptr, u32 dest)
-{
-	struct sk_buff *buf;
-	struct tipc_msg *msg;
-	u32 highest = c_ptr->highest_node;
-	u32 n_num;
-	int send = 0;
-
-	if (in_own_cluster(c_ptr->addr))
-		return;
-	assert(!is_slave(dest));
-	assert(in_own_cluster(dest));
-	highest = c_ptr->highest_node;
-	buf = tipc_cltr_prepare_routing_msg(highest + 1, c_ptr->addr);
-	if (buf) {
-		msg = buf_msg(buf);
-		msg_set_remote_node(msg, c_ptr->addr);
-		msg_set_type(msg, EXT_ROUTING_TABLE);
-		for (n_num = 1; n_num <= highest; n_num++) {
-			if (c_ptr->nodes[n_num] &&
-			    tipc_node_has_active_links(c_ptr->nodes[n_num])) {
-				send = 1;
-				msg_set_dataoctet(msg, n_num);
-			}
-		}
-		if (send)
-			tipc_link_send(buf, dest, dest);
-		else
-			buf_discard(buf);
-	} else {
-		warn("Memory squeeze: broadcast of external route failed\n");
-	}
-}
-
-void tipc_cltr_send_local_routes(struct cluster *c_ptr, u32 dest)
-{
-	struct sk_buff *buf;
-	struct tipc_msg *msg;
-	u32 highest = c_ptr->highest_node;
-	u32 n_num;
-	int send = 0;
-
-	assert(is_slave(dest));
-	assert(in_own_cluster(c_ptr->addr));
-	buf = tipc_cltr_prepare_routing_msg(highest, c_ptr->addr);
-	if (buf) {
-		msg = buf_msg(buf);
-		msg_set_remote_node(msg, c_ptr->addr);
-		msg_set_type(msg, LOCAL_ROUTING_TABLE);
-		for (n_num = 1; n_num <= highest; n_num++) {
-			if (c_ptr->nodes[n_num] &&
-			    tipc_node_has_active_links(c_ptr->nodes[n_num])) {
-				send = 1;
-				msg_set_dataoctet(msg, n_num);
-			}
-		}
-		if (send)
-			tipc_link_send(buf, dest, dest);
-		else
-			buf_discard(buf);
-	} else {
-		warn("Memory squeeze: broadcast of local route failed\n");
-	}
-}
-
-void tipc_cltr_recv_routing_table(struct sk_buff *buf)
-{
-	struct tipc_msg *msg = buf_msg(buf);
-	struct cluster *c_ptr;
-	struct tipc_node *n_ptr;
-	unchar *node_table;
-	u32 table_size;
-	u32 router;
-	u32 rem_node = msg_remote_node(msg);
-	u32 z_num;
-	u32 c_num;
-	u32 n_num;
-
-	c_ptr = tipc_cltr_find(rem_node);
-	if (!c_ptr) {
-		c_ptr = tipc_cltr_create(rem_node);
-		if (!c_ptr) {
-			buf_discard(buf);
-			return;
-		}
-	}
-
-	node_table = buf->data + msg_hdr_sz(msg);
-	table_size = msg_size(msg) - msg_hdr_sz(msg);
-	router = msg_prevnode(msg);
-	z_num = tipc_zone(rem_node);
-	c_num = tipc_cluster(rem_node);
-
-	switch (msg_type(msg)) {
-	case LOCAL_ROUTING_TABLE:
-		assert(is_slave(tipc_own_addr));
-	case EXT_ROUTING_TABLE:
-		for (n_num = 1; n_num < table_size; n_num++) {
-			if (node_table[n_num]) {
-				u32 addr = tipc_addr(z_num, c_num, n_num);
-				n_ptr = c_ptr->nodes[n_num];
-				if (!n_ptr) {
-					n_ptr = tipc_node_create(addr);
-				}
-				if (n_ptr)
-					tipc_node_add_router(n_ptr, router);
-			}
-		}
-		break;
-	case SLAVE_ROUTING_TABLE:
-		assert(!is_slave(tipc_own_addr));
-		assert(in_own_cluster(c_ptr->addr));
-		for (n_num = 1; n_num < table_size; n_num++) {
-			if (node_table[n_num]) {
-				u32 slave_num = n_num + LOWEST_SLAVE;
-				u32 addr = tipc_addr(z_num, c_num, slave_num);
-				n_ptr = c_ptr->nodes[slave_num];
-				if (!n_ptr) {
-					n_ptr = tipc_node_create(addr);
-				}
-				if (n_ptr)
-					tipc_node_add_router(n_ptr, router);
-			}
-		}
-		break;
-	case ROUTE_ADDITION:
-		if (!is_slave(tipc_own_addr)) {
-			assert(!in_own_cluster(c_ptr->addr) ||
-			       is_slave(rem_node));
-		} else {
-			assert(in_own_cluster(c_ptr->addr) &&
-			       !is_slave(rem_node));
-		}
-		n_ptr = c_ptr->nodes[tipc_node(rem_node)];
-		if (!n_ptr)
-			n_ptr = tipc_node_create(rem_node);
-		if (n_ptr)
-			tipc_node_add_router(n_ptr, router);
-		break;
-	case ROUTE_REMOVAL:
-		if (!is_slave(tipc_own_addr)) {
-			assert(!in_own_cluster(c_ptr->addr) ||
-			       is_slave(rem_node));
-		} else {
-			assert(in_own_cluster(c_ptr->addr) &&
-			       !is_slave(rem_node));
-		}
-		n_ptr = c_ptr->nodes[tipc_node(rem_node)];
-		if (n_ptr)
-			tipc_node_remove_router(n_ptr, router);
-		break;
-	default:
-		assert(!"Illegal routing manager message received\n");
-	}
-	buf_discard(buf);
-}
-
-void tipc_cltr_remove_as_router(struct cluster *c_ptr, u32 router)
-{
-	u32 start_entry;
-	u32 tstop;
-	u32 n_num;
-
-	if (is_slave(router))
-		return;	/* Slave nodes can not be routers */
-
-	if (in_own_cluster(c_ptr->addr)) {
-		start_entry = LOWEST_SLAVE;
-		tstop = c_ptr->highest_slave;
-	} else {
-		start_entry = 1;
-		tstop = c_ptr->highest_node;
-	}
-
-	for (n_num = start_entry; n_num <= tstop; n_num++) {
-		if (c_ptr->nodes[n_num]) {
-			tipc_node_remove_router(c_ptr->nodes[n_num], router);
-		}
-	}
-}
-
-/**
- * tipc_cltr_multicast - multicast message to local nodes
- */
-
-static void tipc_cltr_multicast(struct cluster *c_ptr, struct sk_buff *buf,
-			 u32 lower, u32 upper)
-{
-	struct sk_buff *buf_copy;
-	struct tipc_node *n_ptr;
-	u32 n_num;
-	u32 tstop;
-
-	assert(lower <= upper);
-	assert(((lower >= 1) && (lower <= tipc_max_nodes)) ||
-	       ((lower >= LOWEST_SLAVE) && (lower <= tipc_highest_allowed_slave)));
-	assert(((upper >= 1) && (upper <= tipc_max_nodes)) ||
-	       ((upper >= LOWEST_SLAVE) && (upper <= tipc_highest_allowed_slave)));
-	assert(in_own_cluster(c_ptr->addr));
-
-	tstop = is_slave(upper) ? c_ptr->highest_slave : c_ptr->highest_node;
-	if (tstop > upper)
-		tstop = upper;
-	for (n_num = lower; n_num <= tstop; n_num++) {
-		n_ptr = c_ptr->nodes[n_num];
-		if (n_ptr && tipc_node_has_active_links(n_ptr)) {
-			buf_copy = skb_copy(buf, GFP_ATOMIC);
-			if (buf_copy == NULL)
-				break;
-			msg_set_destnode(buf_msg(buf_copy), n_ptr->addr);
-			tipc_link_send(buf_copy, n_ptr->addr, n_ptr->addr);
-		}
-	}
-	buf_discard(buf);
-}
-
-/**
- * tipc_cltr_broadcast - broadcast message to all nodes within cluster
- */
-
-void tipc_cltr_broadcast(struct sk_buff *buf)
-{
-	struct sk_buff *buf_copy;
-	struct cluster *c_ptr;
-	struct tipc_node *n_ptr;
-	u32 n_num;
-	u32 tstart;
-	u32 tstop;
-	u32 node_type;
-
-	if (tipc_mode == TIPC_NET_MODE) {
-		c_ptr = tipc_cltr_find(tipc_own_addr);
-		assert(in_own_cluster(c_ptr->addr));	/* For now */
-
-		/* Send to standard nodes, then repeat loop sending to slaves */
-		tstart = 1;
-		tstop = c_ptr->highest_node;
-		for (node_type = 1; node_type <= 2; node_type++) {
-			for (n_num = tstart; n_num <= tstop; n_num++) {
-				n_ptr = c_ptr->nodes[n_num];
-				if (n_ptr && tipc_node_has_active_links(n_ptr)) {
-					buf_copy = skb_copy(buf, GFP_ATOMIC);
-					if (buf_copy == NULL)
-						goto exit;
-					msg_set_destnode(buf_msg(buf_copy),
-							 n_ptr->addr);
-					tipc_link_send(buf_copy, n_ptr->addr,
-						       n_ptr->addr);
-				}
-			}
-			tstart = LOWEST_SLAVE;
-			tstop = c_ptr->highest_slave;
-		}
-	}
-exit:
-	buf_discard(buf);
-}
-
-int tipc_cltr_init(void)
-{
-	tipc_highest_allowed_slave = LOWEST_SLAVE + tipc_max_slaves;
-	return tipc_cltr_create(tipc_own_addr) ? 0 : -ENOMEM;
-}
-
diff --git a/net/tipc/cluster.h b/net/tipc/cluster.h
deleted file mode 100644
index 32636d98c9c..00000000000
--- a/net/tipc/cluster.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * net/tipc/cluster.h: Include file for TIPC cluster management routines
- *
- * Copyright (c) 2000-2006, Ericsson AB
- * Copyright (c) 2005, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _TIPC_CLUSTER_H
-#define _TIPC_CLUSTER_H
-
-#include "addr.h"
-#include "zone.h"
-
-#define LOWEST_SLAVE  2048u
-
-/**
- * struct cluster - TIPC cluster structure
- * @addr: network address of cluster
- * @owner: pointer to zone that cluster belongs to
- * @nodes: array of pointers to all nodes within cluster
- * @highest_node: id of highest numbered node within cluster
- * @highest_slave: (used for secondary node support)
- */
-
-struct cluster {
-	u32 addr;
-	struct _zone *owner;
-	struct tipc_node **nodes;
-	u32 highest_node;
-	u32 highest_slave;
-};
-
-
-extern struct tipc_node **tipc_local_nodes;
-extern u32 tipc_highest_allowed_slave;
-extern struct tipc_node_map tipc_cltr_bcast_nodes;
-
-void tipc_cltr_remove_as_router(struct cluster *c_ptr, u32 router);
-void tipc_cltr_send_ext_routes(struct cluster *c_ptr, u32 dest);
-struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
-u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref);
-void tipc_cltr_recv_routing_table(struct sk_buff *buf);
-struct cluster *tipc_cltr_create(u32 addr);
-void tipc_cltr_delete(struct cluster *c_ptr);
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr);
-void tipc_cltr_send_slave_routes(struct cluster *c_ptr, u32 dest);
-void tipc_cltr_broadcast(struct sk_buff *buf);
-int tipc_cltr_init(void);
-
-void tipc_cltr_bcast_new_route(struct cluster *c_ptr, u32 dest, u32 lo, u32 hi);
-void tipc_cltr_send_local_routes(struct cluster *c_ptr, u32 dest);
-void tipc_cltr_bcast_lost_route(struct cluster *c_ptr, u32 dest, u32 lo, u32 hi);
-
-static inline struct cluster *tipc_cltr_find(u32 addr)
-{
-	struct _zone *z_ptr = tipc_zone_find(addr);
-
-	if (z_ptr)
-		return z_ptr->clusters[1];
-	return NULL;
-}
-
-#endif
diff --git a/net/tipc/config.c b/net/tipc/config.c
index 50a6133a366..e16750dcf3c 100644
--- a/net/tipc/config.c
+++ b/net/tipc/config.c
@@ -35,30 +35,11 @@
  */
 
 #include "core.h"
-#include "dbg.h"
-#include "bearer.h"
 #include "port.h"
-#include "link.h"
-#include "zone.h"
-#include "addr.h"
 #include "name_table.h"
-#include "node.h"
 #include "config.h"
-#include "discover.h"
 
-struct subscr_data {
-	char usr_handle[8];
-	u32 domain;
-	u32 port_ref;
-	struct list_head subd_list;
-};
-
-struct manager {
-	u32 user_ref;
-	u32 port_ref;
-};
-
-static struct manager mng = { 0};
+static u32 config_port_ref;
 
 static DEFINE_SPINLOCK(config_lock);
 
@@ -83,10 +64,8 @@ int tipc_cfg_append_tlv(struct sk_buff *buf, int tlv_type,
 	struct tlv_desc *tlv = (struct tlv_desc *)skb_tail_pointer(buf);
 	int new_tlv_space = TLV_SPACE(tlv_data_size);
 
-	if (skb_tailroom(buf) < new_tlv_space) {
-		dbg("tipc_cfg_append_tlv unable to append TLV\n");
+	if (skb_tailroom(buf) < new_tlv_space)
 		return 0;
-	}
 	skb_put(buf, new_tlv_space);
 	tlv->tlv_type = htons(tlv_type);
 	tlv->tlv_len  = htons(TLV_LENGTH(tlv_data_size));
@@ -281,38 +260,6 @@ static struct sk_buff *cfg_set_max_ports(void)
 	return tipc_cfg_reply_none();
 }
 
-static struct sk_buff *cfg_set_max_zones(void)
-{
-	u32 value;
-
-	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
-		return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
-	value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
-	if (value == tipc_max_zones)
-		return tipc_cfg_reply_none();
-	if (value != delimit(value, 1, 255))
-		return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
-						   " (max zones must be 1-255)");
-	if (tipc_mode == TIPC_NET_MODE)
-		return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
-			" (cannot change max zones once TIPC has joined a network)");
-	tipc_max_zones = value;
-	return tipc_cfg_reply_none();
-}
-
-static struct sk_buff *cfg_set_max_clusters(void)
-{
-	u32 value;
-
-	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
-		return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
-	value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
-	if (value != delimit(value, 1, 1))
-		return tipc_cfg_reply_error_string(TIPC_CFG_INVALID_VALUE
-						   " (max clusters fixed at 1)");
-	return tipc_cfg_reply_none();
-}
-
 static struct sk_buff *cfg_set_max_nodes(void)
 {
 	u32 value;
@@ -332,19 +279,6 @@ static struct sk_buff *cfg_set_max_nodes(void)
 	return tipc_cfg_reply_none();
 }
 
-static struct sk_buff *cfg_set_max_slaves(void)
-{
-	u32 value;
-
-	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_UNSIGNED))
-		return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
-	value = ntohl(*(__be32 *)TLV_DATA(req_tlv_area));
-	if (value != 0)
-		return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
-						   " (max secondary nodes fixed at 0)");
-	return tipc_cfg_reply_none();
-}
-
 static struct sk_buff *cfg_set_netid(void)
 {
 	u32 value;
@@ -388,8 +322,7 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area
 	} else if (!tipc_remote_management) {
 		rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NO_REMOTE);
 		goto exit;
-	}
-	else if (cmd >= 0x4000) {
+	} else if (cmd >= 0x4000) {
 		u32 domain = 0;
 
 		if ((tipc_nametbl_translate(TIPC_ZM_SRV, 0, &domain) == 0) ||
@@ -464,18 +397,9 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area
 	case TIPC_CMD_SET_MAX_SUBSCR:
 		rep_tlv_buf = cfg_set_max_subscriptions();
 		break;
-	case TIPC_CMD_SET_MAX_ZONES:
-		rep_tlv_buf = cfg_set_max_zones();
-		break;
-	case TIPC_CMD_SET_MAX_CLUSTERS:
-		rep_tlv_buf = cfg_set_max_clusters();
-		break;
 	case TIPC_CMD_SET_MAX_NODES:
 		rep_tlv_buf = cfg_set_max_nodes();
 		break;
-	case TIPC_CMD_SET_MAX_SLAVES:
-		rep_tlv_buf = cfg_set_max_slaves();
-		break;
 	case TIPC_CMD_SET_NETID:
 		rep_tlv_buf = cfg_set_netid();
 		break;
@@ -491,18 +415,9 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area
 	case TIPC_CMD_GET_MAX_SUBSCR:
 		rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_subscriptions);
 		break;
-	case TIPC_CMD_GET_MAX_ZONES:
-		rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_zones);
-		break;
-	case TIPC_CMD_GET_MAX_CLUSTERS:
-		rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_clusters);
-		break;
 	case TIPC_CMD_GET_MAX_NODES:
 		rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_nodes);
 		break;
-	case TIPC_CMD_GET_MAX_SLAVES:
-		rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_max_slaves);
-		break;
 	case TIPC_CMD_GET_NETID:
 		rep_tlv_buf = tipc_cfg_reply_unsigned(tipc_net_id);
 		break;
@@ -510,6 +425,15 @@ struct sk_buff *tipc_cfg_do_cmd(u32 orig_node, u16 cmd, const void *request_area
 		rep_tlv_buf =
 			tipc_cfg_reply_error_string(TIPC_CFG_NOT_NET_ADMIN);
 		break;
+	case TIPC_CMD_SET_MAX_ZONES:
+	case TIPC_CMD_GET_MAX_ZONES:
+	case TIPC_CMD_SET_MAX_SLAVES:
+	case TIPC_CMD_GET_MAX_SLAVES:
+	case TIPC_CMD_SET_MAX_CLUSTERS:
+	case TIPC_CMD_GET_MAX_CLUSTERS:
+		rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
+							  " (obsolete command)");
+		break;
 	default:
 		rep_tlv_buf = tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
 							  " (unknown command)");
@@ -572,20 +496,16 @@ int tipc_cfg_init(void)
 	struct tipc_name_seq seq;
 	int res;
 
-	res = tipc_attach(&mng.user_ref, NULL, NULL);
-	if (res)
-		goto failed;
-
-	res = tipc_createport(mng.user_ref, NULL, TIPC_CRITICAL_IMPORTANCE,
+	res = tipc_createport(NULL, TIPC_CRITICAL_IMPORTANCE,
 			      NULL, NULL, NULL,
 			      NULL, cfg_named_msg_event, NULL,
-			      NULL, &mng.port_ref);
+			      NULL, &config_port_ref);
 	if (res)
 		goto failed;
 
 	seq.type = TIPC_CFG_SRV;
 	seq.lower = seq.upper = tipc_own_addr;
-	res = tipc_nametbl_publish_rsv(mng.port_ref, TIPC_ZONE_SCOPE, &seq);
+	res = tipc_nametbl_publish_rsv(config_port_ref, TIPC_ZONE_SCOPE, &seq);
 	if (res)
 		goto failed;
 
@@ -593,15 +513,13 @@ int tipc_cfg_init(void)
 
 failed:
 	err("Unable to create configuration service\n");
-	tipc_detach(mng.user_ref);
-	mng.user_ref = 0;
 	return res;
 }
 
 void tipc_cfg_stop(void)
 {
-	if (mng.user_ref) {
-		tipc_detach(mng.user_ref);
-		mng.user_ref = 0;
+	if (config_port_ref) {
+		tipc_deleteport(config_port_ref);
+		config_port_ref = 0;
 	}
 }
diff --git a/net/tipc/config.h b/net/tipc/config.h
index 481e12ece71..443159a166f 100644
--- a/net/tipc/config.h
+++ b/net/tipc/config.h
@@ -39,7 +39,6 @@
 
 /* ---------------------------------------------------------------------- */
 
-#include "core.h"
 #include "link.h"
 
 struct sk_buff *tipc_cfg_reply_alloc(int payload_size);
diff --git a/net/tipc/core.c b/net/tipc/core.c
index e2a09eb8efd..e071579e085 100644
--- a/net/tipc/core.c
+++ b/net/tipc/core.c
@@ -34,37 +34,17 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/random.h>
-
 #include "core.h"
-#include "dbg.h"
 #include "ref.h"
-#include "net.h"
-#include "user_reg.h"
 #include "name_table.h"
 #include "subscr.h"
 #include "config.h"
 
 
-#ifndef CONFIG_TIPC_ZONES
-#define CONFIG_TIPC_ZONES 3
-#endif
-
-#ifndef CONFIG_TIPC_CLUSTERS
-#define CONFIG_TIPC_CLUSTERS 1
-#endif
-
 #ifndef CONFIG_TIPC_NODES
 #define CONFIG_TIPC_NODES 255
 #endif
 
-#ifndef CONFIG_TIPC_SLAVE_NODES
-#define CONFIG_TIPC_SLAVE_NODES 0
-#endif
-
 #ifndef CONFIG_TIPC_PORTS
 #define CONFIG_TIPC_PORTS 8191
 #endif
@@ -85,10 +65,7 @@ const char tipc_alphabet[] =
 /* configurable TIPC parameters */
 
 u32 tipc_own_addr;
-int tipc_max_zones;
-int tipc_max_clusters;
 int tipc_max_nodes;
-int tipc_max_slaves;
 int tipc_max_ports;
 int tipc_max_subscriptions;
 int tipc_max_publications;
@@ -138,10 +115,11 @@ int tipc_core_start_net(unsigned long addr)
 {
 	int res;
 
-	if ((res = tipc_net_start(addr)) ||
-	    (res = tipc_eth_media_start())) {
+	res = tipc_net_start(addr);
+	if (!res)
+		res = tipc_eth_media_start();
+	if (res)
 		tipc_core_stop_net();
-	}
 	return res;
 }
 
@@ -160,7 +138,6 @@ static void tipc_core_stop(void)
 	tipc_handler_stop();
 	tipc_cfg_stop();
 	tipc_subscr_stop();
-	tipc_reg_stop();
 	tipc_nametbl_stop();
 	tipc_ref_table_stop();
 	tipc_socket_stop();
@@ -181,16 +158,22 @@ static int tipc_core_start(void)
 	get_random_bytes(&tipc_random, sizeof(tipc_random));
 	tipc_mode = TIPC_NODE_MODE;
 
-	if ((res = tipc_handler_start()) ||
-	    (res = tipc_ref_table_init(tipc_max_ports, tipc_random)) ||
-	    (res = tipc_reg_start()) ||
-	    (res = tipc_nametbl_init()) ||
-	    (res = tipc_k_signal((Handler)tipc_subscr_start, 0)) ||
-	    (res = tipc_k_signal((Handler)tipc_cfg_init, 0)) ||
-	    (res = tipc_netlink_start()) ||
-	    (res = tipc_socket_init())) {
+	res = tipc_handler_start();
+	if (!res)
+		res = tipc_ref_table_init(tipc_max_ports, tipc_random);
+	if (!res)
+		res = tipc_nametbl_init();
+	if (!res)
+		res = tipc_k_signal((Handler)tipc_subscr_start, 0);
+	if (!res)
+		res = tipc_k_signal((Handler)tipc_cfg_init, 0);
+	if (!res)
+		res = tipc_netlink_start();
+	if (!res)
+		res = tipc_socket_init();
+	if (res)
 		tipc_core_stop();
-	}
+
 	return res;
 }
 
@@ -210,13 +193,11 @@ static int __init tipc_init(void)
 	tipc_max_publications = 10000;
 	tipc_max_subscriptions = 2000;
 	tipc_max_ports = CONFIG_TIPC_PORTS;
-	tipc_max_zones = CONFIG_TIPC_ZONES;
-	tipc_max_clusters = CONFIG_TIPC_CLUSTERS;
 	tipc_max_nodes = CONFIG_TIPC_NODES;
-	tipc_max_slaves = CONFIG_TIPC_SLAVE_NODES;
 	tipc_net_id = 4711;
 
-	if ((res = tipc_core_start()))
+	res = tipc_core_start();
+	if (res)
 		err("Unable to start in single node mode\n");
 	else
 		info("Started in single node mode\n");
@@ -236,43 +217,3 @@ module_exit(tipc_exit);
 MODULE_DESCRIPTION("TIPC: Transparent Inter Process Communication");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_VERSION(TIPC_MOD_VER);
-
-/* Native TIPC API for kernel-space applications (see tipc.h) */
-
-EXPORT_SYMBOL(tipc_attach);
-EXPORT_SYMBOL(tipc_detach);
-EXPORT_SYMBOL(tipc_createport);
-EXPORT_SYMBOL(tipc_deleteport);
-EXPORT_SYMBOL(tipc_ownidentity);
-EXPORT_SYMBOL(tipc_portimportance);
-EXPORT_SYMBOL(tipc_set_portimportance);
-EXPORT_SYMBOL(tipc_portunreliable);
-EXPORT_SYMBOL(tipc_set_portunreliable);
-EXPORT_SYMBOL(tipc_portunreturnable);
-EXPORT_SYMBOL(tipc_set_portunreturnable);
-EXPORT_SYMBOL(tipc_publish);
-EXPORT_SYMBOL(tipc_withdraw);
-EXPORT_SYMBOL(tipc_connect2port);
-EXPORT_SYMBOL(tipc_disconnect);
-EXPORT_SYMBOL(tipc_shutdown);
-EXPORT_SYMBOL(tipc_send);
-EXPORT_SYMBOL(tipc_send2name);
-EXPORT_SYMBOL(tipc_send2port);
-EXPORT_SYMBOL(tipc_multicast);
-
-/* TIPC API for external bearers (see tipc_bearer.h) */
-
-EXPORT_SYMBOL(tipc_block_bearer);
-EXPORT_SYMBOL(tipc_continue);
-EXPORT_SYMBOL(tipc_disable_bearer);
-EXPORT_SYMBOL(tipc_enable_bearer);
-EXPORT_SYMBOL(tipc_recv_msg);
-EXPORT_SYMBOL(tipc_register_media);
-
-/* TIPC API for external APIs (see tipc_port.h) */
-
-EXPORT_SYMBOL(tipc_createport_raw);
-EXPORT_SYMBOL(tipc_reject_msg);
-EXPORT_SYMBOL(tipc_send_buf_fast);
-EXPORT_SYMBOL(tipc_acknowledge);
-
diff --git a/net/tipc/core.h b/net/tipc/core.h
index e19389e5722..997158546e2 100644
--- a/net/tipc/core.h
+++ b/net/tipc/core.h
@@ -39,10 +39,6 @@
 
 #include <linux/tipc.h>
 #include <linux/tipc_config.h>
-#include <net/tipc/tipc_msg.h>
-#include <net/tipc/tipc_port.h>
-#include <net/tipc/tipc_bearer.h>
-#include <net/tipc/tipc.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -62,6 +58,9 @@
 
 #define TIPC_MOD_VER "2.0.0"
 
+struct tipc_msg;	/* msg.h */
+struct print_buf;	/* log.h */
+
 /*
  * TIPC sanity test macros
  */
@@ -84,6 +83,7 @@
  *       user-defined buffers can be configured to do the same thing.
  */
 extern struct print_buf *const TIPC_NULL;
+extern struct print_buf *const TIPC_CONS;
 extern struct print_buf *const TIPC_LOG;
 
 void tipc_printf(struct print_buf *, const char *fmt, ...);
@@ -96,73 +96,35 @@ void tipc_printf(struct print_buf *, const char *fmt, ...);
 #define TIPC_OUTPUT TIPC_LOG
 #endif
 
-/*
- * TIPC can be configured to send system messages to TIPC_OUTPUT
- * or to the system console only.
- */
-
-#ifdef CONFIG_TIPC_DEBUG
-
 #define err(fmt, arg...)  tipc_printf(TIPC_OUTPUT, \
-					KERN_ERR "TIPC: " fmt, ## arg)
+				      KERN_ERR "TIPC: " fmt, ## arg)
 #define warn(fmt, arg...) tipc_printf(TIPC_OUTPUT, \
-					KERN_WARNING "TIPC: " fmt, ## arg)
+				      KERN_WARNING "TIPC: " fmt, ## arg)
 #define info(fmt, arg...) tipc_printf(TIPC_OUTPUT, \
-					KERN_NOTICE "TIPC: " fmt, ## arg)
-
-#else
-
-#define err(fmt, arg...)  printk(KERN_ERR "TIPC: " fmt , ## arg)
-#define info(fmt, arg...) printk(KERN_INFO "TIPC: " fmt , ## arg)
-#define warn(fmt, arg...) printk(KERN_WARNING "TIPC: " fmt , ## arg)
+				      KERN_NOTICE "TIPC: " fmt, ## arg)
 
-#endif
+#ifdef CONFIG_TIPC_DEBUG
 
 /*
  * DBG_OUTPUT is the destination print buffer for debug messages.
- * It defaults to the the null print buffer, but can be redefined
- * (typically in the individual .c files being debugged) to allow
- * selected debug messages to be generated where needed.
  */
 
 #ifndef DBG_OUTPUT
-#define DBG_OUTPUT TIPC_NULL
+#define DBG_OUTPUT TIPC_LOG
 #endif
 
-/*
- * TIPC can be configured to send debug messages to the specified print buffer
- * (typically DBG_OUTPUT) or to suppress them entirely.
- */
+#define dbg(fmt, arg...)  tipc_printf(DBG_OUTPUT, KERN_DEBUG fmt, ## arg);
 
-#ifdef CONFIG_TIPC_DEBUG
-
-#define dbg(fmt, arg...)  \
-	do { \
-		if (DBG_OUTPUT != TIPC_NULL) \
-			tipc_printf(DBG_OUTPUT, fmt, ## arg); \
-	} while (0)
-#define msg_dbg(msg, txt) \
-	do { \
-		if (DBG_OUTPUT != TIPC_NULL) \
-			tipc_msg_dbg(DBG_OUTPUT, msg, txt); \
-	} while (0)
-#define dump(fmt, arg...) \
-	do { \
-		if (DBG_OUTPUT != TIPC_NULL) \
-			tipc_dump_dbg(DBG_OUTPUT, fmt, ##arg); \
-	} while (0)
+#define msg_dbg(msg, txt) tipc_msg_dbg(DBG_OUTPUT, msg, txt);
 
 void tipc_msg_dbg(struct print_buf *, struct tipc_msg *, const char *);
-void tipc_dump_dbg(struct print_buf *, const char *fmt, ...);
 
 #else
 
 #define dbg(fmt, arg...)	do {} while (0)
 #define msg_dbg(msg, txt)	do {} while (0)
-#define dump(fmt, arg...)	do {} while (0)
 
-#define tipc_msg_dbg(...)	do {} while (0)
-#define tipc_dump_dbg(...)	do {} while (0)
+#define tipc_msg_dbg(buf, msg, txt) do {} while (0)
 
 #endif
 
@@ -174,14 +136,18 @@ void tipc_dump_dbg(struct print_buf *, const char *fmt, ...);
 #define ELINKCONG EAGAIN	/* link congestion <=> resource unavailable */
 
 /*
+ * TIPC operating mode routines
+ */
+#define TIPC_NOT_RUNNING  0
+#define TIPC_NODE_MODE    1
+#define TIPC_NET_MODE     2
+
+/*
  * Global configuration variables
  */
 
 extern u32 tipc_own_addr;
-extern int tipc_max_zones;
-extern int tipc_max_clusters;
 extern int tipc_max_nodes;
-extern int tipc_max_slaves;
 extern int tipc_max_ports;
 extern int tipc_max_subscriptions;
 extern int tipc_max_publications;
@@ -240,7 +206,6 @@ u32 tipc_k_signal(Handler routine, unsigned long argument);
 static inline void k_init_timer(struct timer_list *timer, Handler routine,
 				unsigned long argument)
 {
-	dbg("initializing timer %p\n", timer);
 	setup_timer(timer, routine, argument);
 }
 
@@ -260,7 +225,6 @@ static inline void k_init_timer(struct timer_list *timer, Handler routine,
 
 static inline void k_start_timer(struct timer_list *timer, unsigned long msec)
 {
-	dbg("starting timer %p for %u\n", timer, msec);
 	mod_timer(timer, jiffies + msecs_to_jiffies(msec) + 1);
 }
 
@@ -277,7 +241,6 @@ static inline void k_start_timer(struct timer_list *timer, unsigned long msec)
 
 static inline void k_cancel_timer(struct timer_list *timer)
 {
-	dbg("cancelling timer %p\n", timer);
 	del_timer_sync(timer);
 }
 
@@ -295,7 +258,6 @@ static inline void k_cancel_timer(struct timer_list *timer)
 
 static inline void k_term_timer(struct timer_list *timer)
 {
-	dbg("terminating timer %p\n", timer);
 }
 
 
diff --git a/net/tipc/discover.c b/net/tipc/discover.c
index 4a7cd3719b7..fa026bd91a6 100644
--- a/net/tipc/discover.c
+++ b/net/tipc/discover.c
@@ -35,12 +35,8 @@
  */
 
 #include "core.h"
-#include "dbg.h"
 #include "link.h"
-#include "zone.h"
 #include "discover.h"
-#include "port.h"
-#include "name_table.h"
 
 #define TIPC_LINK_REQ_INIT	125	/* min delay during bearer start up */
 #define TIPC_LINK_REQ_FAST	2000	/* normal delay if bearer has no links */
@@ -134,8 +130,7 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct bearer *b_ptr)
 	u32 net_id = msg_bc_netid(msg);
 	u32 type = msg_type(msg);
 
-	msg_get_media_addr(msg,&media_addr);
-	msg_dbg(msg, "RECV:");
+	msg_get_media_addr(msg, &media_addr);
 	buf_discard(buf);
 
 	if (net_id != tipc_net_id)
@@ -151,10 +146,6 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct bearer *b_ptr)
 	}
 	if (!tipc_in_scope(dest, tipc_own_addr))
 		return;
-	if (is_slave(tipc_own_addr) && is_slave(orig))
-		return;
-	if (is_slave(orig) && !in_own_cluster(orig))
-		return;
 	if (in_own_cluster(orig)) {
 		/* Always accept link here */
 		struct sk_buff *rbuf;
@@ -162,7 +153,6 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct bearer *b_ptr)
 		struct tipc_node *n_ptr = tipc_node_find(orig);
 		int link_fully_up;
 
-		dbg(" in own cluster\n");
 		if (n_ptr == NULL) {
 			n_ptr = tipc_node_create(orig);
 			if (!n_ptr)
@@ -179,7 +169,6 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct bearer *b_ptr)
 
 		link = n_ptr->links[b_ptr->identity];
 		if (!link) {
-			dbg("creating link\n");
 			link = tipc_link_create(b_ptr, orig, &media_addr);
 			if (!link) {
 				spin_unlock_bh(&n_ptr->lock);
@@ -204,7 +193,6 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct bearer *b_ptr)
 			return;
 		rbuf = tipc_disc_init_msg(DSC_RESP_MSG, 1, orig, b_ptr);
 		if (rbuf != NULL) {
-			msg_dbg(buf_msg(rbuf),"SEND:");
 			b_ptr->media->send_msg(rbuf, &b_ptr->publ, &media_addr);
 			buf_discard(rbuf);
 		}
diff --git a/net/tipc/discover.h b/net/tipc/discover.h
index f8e75063612..d2c3cffb79f 100644
--- a/net/tipc/discover.h
+++ b/net/tipc/discover.h
@@ -37,8 +37,6 @@
 #ifndef _TIPC_DISCOVER_H
 #define _TIPC_DISCOVER_H
 
-#include "core.h"
-
 struct link_req;
 
 struct link_req *tipc_disc_init_link_req(struct bearer *b_ptr,
diff --git a/net/tipc/eth_media.c b/net/tipc/eth_media.c
index 6e988ba485f..b69092eb95d 100644
--- a/net/tipc/eth_media.c
+++ b/net/tipc/eth_media.c
@@ -34,12 +34,8 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <net/tipc/tipc.h>
-#include <net/tipc/tipc_bearer.h>
-#include <net/tipc/tipc_msg.h>
-#include <linux/netdevice.h>
-#include <linux/slab.h>
-#include <net/net_namespace.h>
+#include "core.h"
+#include "bearer.h"
 
 #define MAX_ETH_BEARERS		2
 #define ETH_LINK_PRIORITY	TIPC_DEF_LINK_PRI
@@ -60,7 +56,7 @@ struct eth_bearer {
 };
 
 static struct eth_bearer eth_bearers[MAX_ETH_BEARERS];
-static int eth_started = 0;
+static int eth_started;
 static struct notifier_block notifier;
 
 /**
@@ -148,7 +144,7 @@ static int enable_bearer(struct tipc_bearer *tb_ptr)
 
 	/* Find device with specified name */
 
-	for_each_netdev(&init_net, pdev){
+	for_each_netdev(&init_net, pdev) {
 		if (!strncmp(pdev->name, driver_name, IFNAMSIZ)) {
 			dev = pdev;
 			break;
@@ -159,7 +155,8 @@ static int enable_bearer(struct tipc_bearer *tb_ptr)
 
 	/* Find Ethernet bearer for device (or create one) */
 
-	for (;(eb_ptr != stop) && eb_ptr->dev && (eb_ptr->dev != dev); eb_ptr++);
+	while ((eb_ptr != stop) && eb_ptr->dev && (eb_ptr->dev != dev))
+		eb_ptr++;
 	if (eb_ptr == stop)
 		return -EDQUOT;
 	if (!eb_ptr->dev) {
diff --git a/net/tipc/handler.c b/net/tipc/handler.c
index 0c70010a7df..274c98e164b 100644
--- a/net/tipc/handler.c
+++ b/net/tipc/handler.c
@@ -45,7 +45,7 @@ struct queue_item {
 static struct kmem_cache *tipc_queue_item_cache;
 static struct list_head signal_queue_head;
 static DEFINE_SPINLOCK(qitem_lock);
-static int handler_enabled = 0;
+static int handler_enabled;
 
 static void process_signal_queue(unsigned long dummy);
 
diff --git a/net/tipc/link.c b/net/tipc/link.c
index b31992ccd5d..18702f58d11 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -35,19 +35,11 @@
  */
 
 #include "core.h"
-#include "dbg.h"
 #include "link.h"
-#include "net.h"
-#include "node.h"
 #include "port.h"
-#include "addr.h"
-#include "node_subscr.h"
 #include "name_distr.h"
-#include "bearer.h"
-#include "name_table.h"
 #include "discover.h"
 #include "config.h"
-#include "bcast.h"
 
 
 /*
@@ -57,12 +49,6 @@
 #define INVALID_SESSION 0x10000
 
 /*
- * Limit for deferred reception queue:
- */
-
-#define DEF_QUEUE_LIMIT 256u
-
-/*
  * Link state events:
  */
 
@@ -110,75 +96,10 @@ static int  link_send_sections_long(struct port *sender,
 static void link_check_defragm_bufs(struct link *l_ptr);
 static void link_state_event(struct link *l_ptr, u32 event);
 static void link_reset_statistics(struct link *l_ptr);
-static void link_print(struct link *l_ptr, struct print_buf *buf,
-		       const char *str);
+static void link_print(struct link *l_ptr, const char *str);
 static void link_start(struct link *l_ptr);
 static int link_send_long_buf(struct link *l_ptr, struct sk_buff *buf);
 
-
-/*
- * Debugging code used by link routines only
- *
- * When debugging link problems on a system that has multiple links,
- * the standard TIPC debugging routines may not be useful since they
- * allow the output from multiple links to be intermixed.  For this reason
- * routines of the form "dbg_link_XXX()" have been created that will capture
- * debug info into a link's personal print buffer, which can then be dumped
- * into the TIPC system log (TIPC_LOG) upon request.
- *
- * To enable per-link debugging, use LINK_LOG_BUF_SIZE to specify the size
- * of the print buffer used by each link.  If LINK_LOG_BUF_SIZE is set to 0,
- * the dbg_link_XXX() routines simply send their output to the standard
- * debug print buffer (DBG_OUTPUT), if it has been defined; this can be useful
- * when there is only a single link in the system being debugged.
- *
- * Notes:
- * - When enabled, LINK_LOG_BUF_SIZE should be set to at least TIPC_PB_MIN_SIZE
- * - "l_ptr" must be valid when using dbg_link_XXX() macros
- */
-
-#define LINK_LOG_BUF_SIZE 0
-
-#define dbg_link(fmt, arg...) \
-	do { \
-		if (LINK_LOG_BUF_SIZE) \
-			tipc_printf(&l_ptr->print_buf, fmt, ## arg); \
-	} while (0)
-#define dbg_link_msg(msg, txt) \
-	do { \
-		if (LINK_LOG_BUF_SIZE) \
-			tipc_msg_dbg(&l_ptr->print_buf, msg, txt); \
-	} while (0)
-#define dbg_link_state(txt) \
-	do { \
-		if (LINK_LOG_BUF_SIZE) \
-			link_print(l_ptr, &l_ptr->print_buf, txt); \
-	} while (0)
-#define dbg_link_dump() do { \
-	if (LINK_LOG_BUF_SIZE) { \
-		tipc_printf(LOG, "\n\nDumping link <%s>:\n", l_ptr->name); \
-		tipc_printbuf_move(LOG, &l_ptr->print_buf); \
-	} \
-} while (0)
-
-static void dbg_print_link(struct link *l_ptr, const char *str)
-{
-	if (DBG_OUTPUT != TIPC_NULL)
-		link_print(l_ptr, DBG_OUTPUT, str);
-}
-
-static void dbg_print_buf_chain(struct sk_buff *root_buf)
-{
-	if (DBG_OUTPUT != TIPC_NULL) {
-		struct sk_buff *buf = root_buf;
-
-		while (buf) {
-			msg_dbg(buf_msg(buf), "In chain: ");
-			buf = buf->next;
-		}
-	}
-}
-
 /*
  *  Simple link routines
  */
@@ -266,14 +187,17 @@ static int link_name_validate(const char *name, struct link_name *name_parts)
 	/* ensure all component parts of link name are present */
 
 	addr_local = name_copy;
-	if ((if_local = strchr(addr_local, ':')) == NULL)
+	if_local = strchr(addr_local, ':');
+	if (if_local == NULL)
 		return 0;
 	*(if_local++) = 0;
-	if ((addr_peer = strchr(if_local, '-')) == NULL)
+	addr_peer = strchr(if_local, '-');
+	if (addr_peer == NULL)
 		return 0;
 	*(addr_peer++) = 0;
 	if_local_len = addr_peer - if_local;
-	if ((if_peer = strchr(addr_peer, ':')) == NULL)
+	if_peer = strchr(addr_peer, ':');
+	if (if_peer == NULL)
 		return 0;
 	*(if_peer++) = 0;
 	if_peer_len = strlen(if_peer) + 1;
@@ -392,17 +316,6 @@ struct link *tipc_link_create(struct bearer *b_ptr, const u32 peer,
 		return NULL;
 	}
 
-	if (LINK_LOG_BUF_SIZE) {
-		char *pb = kmalloc(LINK_LOG_BUF_SIZE, GFP_ATOMIC);
-
-		if (!pb) {
-			kfree(l_ptr);
-			warn("Link creation failed, no memory for print buffer\n");
-			return NULL;
-		}
-		tipc_printbuf_init(&l_ptr->print_buf, pb, LINK_LOG_BUF_SIZE);
-	}
-
 	l_ptr->addr = peer;
 	if_name = strchr(b_ptr->publ.name, ':') + 1;
 	sprintf(l_ptr->name, "%u.%u.%u:%s-%u.%u.%u:",
@@ -437,8 +350,6 @@ struct link *tipc_link_create(struct bearer *b_ptr, const u32 peer,
 
 	l_ptr->owner = tipc_node_attach_link(l_ptr);
 	if (!l_ptr->owner) {
-		if (LINK_LOG_BUF_SIZE)
-			kfree(l_ptr->print_buf.buf);
 		kfree(l_ptr);
 		return NULL;
 	}
@@ -447,9 +358,6 @@ struct link *tipc_link_create(struct bearer *b_ptr, const u32 peer,
 	list_add_tail(&l_ptr->link_list, &b_ptr->links);
 	tipc_k_signal((Handler)link_start, (unsigned long)l_ptr);
 
-	dbg("tipc_link_create(): tolerance = %u,cont intv = %u, abort_limit = %u\n",
-	    l_ptr->tolerance, l_ptr->continuity_interval, l_ptr->abort_limit);
-
 	return l_ptr;
 }
 
@@ -469,8 +377,6 @@ void tipc_link_delete(struct link *l_ptr)
 		return;
 	}
 
-	dbg("tipc_link_delete()\n");
-
 	k_cancel_timer(&l_ptr->timer);
 
 	tipc_node_lock(l_ptr->owner);
@@ -478,8 +384,6 @@ void tipc_link_delete(struct link *l_ptr)
 	tipc_node_detach_link(l_ptr->owner, l_ptr);
 	tipc_link_stop(l_ptr);
 	list_del_init(&l_ptr->link_list);
-	if (LINK_LOG_BUF_SIZE)
-		kfree(l_ptr->print_buf.buf);
 	tipc_node_unlock(l_ptr->owner);
 	k_term_timer(&l_ptr->timer);
 	kfree(l_ptr);
@@ -487,7 +391,6 @@ void tipc_link_delete(struct link *l_ptr)
 
 static void link_start(struct link *l_ptr)
 {
-	dbg("link_start %x\n", l_ptr);
 	link_state_event(l_ptr, STARTING_EVT);
 }
 
@@ -639,7 +542,6 @@ void tipc_link_reset(struct link *l_ptr)
 	link_init_max_pkt(l_ptr);
 
 	l_ptr->state = RESET_UNKNOWN;
-	dbg_link_state("Resetting Link\n");
 
 	if ((prev_state == RESET_UNKNOWN) || (prev_state == RESET_RESET))
 		return;
@@ -713,25 +615,18 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 		return;		/* Not yet. */
 
 	if (link_blocked(l_ptr)) {
-		if (event == TIMEOUT_EVT) {
+		if (event == TIMEOUT_EVT)
 			link_set_timer(l_ptr, cont_intv);
-		}
 		return;	  /* Changeover going on */
 	}
-	dbg_link("STATE_EV: <%s> ", l_ptr->name);
 
 	switch (l_ptr->state) {
 	case WORKING_WORKING:
-		dbg_link("WW/");
 		switch (event) {
 		case TRAFFIC_MSG_EVT:
-			dbg_link("TRF-");
-			/* fall through */
 		case ACTIVATE_MSG:
-			dbg_link("ACT\n");
 			break;
 		case TIMEOUT_EVT:
-			dbg_link("TIM ");
 			if (l_ptr->next_in_no != l_ptr->checkpoint) {
 				l_ptr->checkpoint = l_ptr->next_in_no;
 				if (tipc_bclink_acks_missing(l_ptr->owner)) {
@@ -746,7 +641,6 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 				link_set_timer(l_ptr, cont_intv);
 				break;
 			}
-			dbg_link(" -> WU\n");
 			l_ptr->state = WORKING_UNKNOWN;
 			l_ptr->fsm_msg_cnt = 0;
 			tipc_link_send_proto_msg(l_ptr, STATE_MSG, 1, 0, 0, 0, 0);
@@ -754,7 +648,6 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 			link_set_timer(l_ptr, cont_intv / 4);
 			break;
 		case RESET_MSG:
-			dbg_link("RES -> RR\n");
 			info("Resetting link <%s>, requested by peer\n",
 			     l_ptr->name);
 			tipc_link_reset(l_ptr);
@@ -769,18 +662,14 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 		}
 		break;
 	case WORKING_UNKNOWN:
-		dbg_link("WU/");
 		switch (event) {
 		case TRAFFIC_MSG_EVT:
-			dbg_link("TRF-");
 		case ACTIVATE_MSG:
-			dbg_link("ACT -> WW\n");
 			l_ptr->state = WORKING_WORKING;
 			l_ptr->fsm_msg_cnt = 0;
 			link_set_timer(l_ptr, cont_intv);
 			break;
 		case RESET_MSG:
-			dbg_link("RES -> RR\n");
 			info("Resetting link <%s>, requested by peer "
 			     "while probing\n", l_ptr->name);
 			tipc_link_reset(l_ptr);
@@ -791,9 +680,7 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 			link_set_timer(l_ptr, cont_intv);
 			break;
 		case TIMEOUT_EVT:
-			dbg_link("TIM ");
 			if (l_ptr->next_in_no != l_ptr->checkpoint) {
-				dbg_link("-> WW\n");
 				l_ptr->state = WORKING_WORKING;
 				l_ptr->fsm_msg_cnt = 0;
 				l_ptr->checkpoint = l_ptr->next_in_no;
@@ -804,16 +691,11 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 				}
 				link_set_timer(l_ptr, cont_intv);
 			} else if (l_ptr->fsm_msg_cnt < l_ptr->abort_limit) {
-				dbg_link("Probing %u/%u,timer = %u ms)\n",
-					 l_ptr->fsm_msg_cnt, l_ptr->abort_limit,
-					 cont_intv / 4);
 				tipc_link_send_proto_msg(l_ptr, STATE_MSG,
 							 1, 0, 0, 0, 0);
 				l_ptr->fsm_msg_cnt++;
 				link_set_timer(l_ptr, cont_intv / 4);
 			} else {	/* Link has failed */
-				dbg_link("-> RU (%u probes unanswered)\n",
-					 l_ptr->fsm_msg_cnt);
 				warn("Resetting link <%s>, peer not responding\n",
 				     l_ptr->name);
 				tipc_link_reset(l_ptr);
@@ -830,18 +712,13 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 		}
 		break;
 	case RESET_UNKNOWN:
-		dbg_link("RU/");
 		switch (event) {
 		case TRAFFIC_MSG_EVT:
-			dbg_link("TRF-\n");
 			break;
 		case ACTIVATE_MSG:
 			other = l_ptr->owner->active_links[0];
-			if (other && link_working_unknown(other)) {
-				dbg_link("ACT\n");
+			if (other && link_working_unknown(other))
 				break;
-			}
-			dbg_link("ACT -> WW\n");
 			l_ptr->state = WORKING_WORKING;
 			l_ptr->fsm_msg_cnt = 0;
 			link_activate(l_ptr);
@@ -850,8 +727,6 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 			link_set_timer(l_ptr, cont_intv);
 			break;
 		case RESET_MSG:
-			dbg_link("RES\n");
-			dbg_link(" -> RR\n");
 			l_ptr->state = RESET_RESET;
 			l_ptr->fsm_msg_cnt = 0;
 			tipc_link_send_proto_msg(l_ptr, ACTIVATE_MSG, 1, 0, 0, 0, 0);
@@ -859,11 +734,9 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 			link_set_timer(l_ptr, cont_intv);
 			break;
 		case STARTING_EVT:
-			dbg_link("START-");
 			l_ptr->started = 1;
 			/* fall through */
 		case TIMEOUT_EVT:
-			dbg_link("TIM\n");
 			tipc_link_send_proto_msg(l_ptr, RESET_MSG, 0, 0, 0, 0, 0);
 			l_ptr->fsm_msg_cnt++;
 			link_set_timer(l_ptr, cont_intv);
@@ -873,18 +746,12 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 		}
 		break;
 	case RESET_RESET:
-		dbg_link("RR/ ");
 		switch (event) {
 		case TRAFFIC_MSG_EVT:
-			dbg_link("TRF-");
-			/* fall through */
 		case ACTIVATE_MSG:
 			other = l_ptr->owner->active_links[0];
-			if (other && link_working_unknown(other)) {
-				dbg_link("ACT\n");
+			if (other && link_working_unknown(other))
 				break;
-			}
-			dbg_link("ACT -> WW\n");
 			l_ptr->state = WORKING_WORKING;
 			l_ptr->fsm_msg_cnt = 0;
 			link_activate(l_ptr);
@@ -893,14 +760,11 @@ static void link_state_event(struct link *l_ptr, unsigned event)
 			link_set_timer(l_ptr, cont_intv);
 			break;
 		case RESET_MSG:
-			dbg_link("RES\n");
 			break;
 		case TIMEOUT_EVT:
-			dbg_link("TIM\n");
 			tipc_link_send_proto_msg(l_ptr, ACTIVATE_MSG, 0, 0, 0, 0, 0);
 			l_ptr->fsm_msg_cnt++;
 			link_set_timer(l_ptr, cont_intv);
-			dbg_link("fsm_msg_cnt %u\n", l_ptr->fsm_msg_cnt);
 			break;
 		default:
 			err("Unknown link event %u in RR state\n", event);
@@ -940,9 +804,6 @@ static int link_bundle_buf(struct link *l_ptr,
 	skb_copy_to_linear_data_offset(bundler, to_pos, buf->data, size);
 	msg_set_size(bundler_msg, to_pos + size);
 	msg_set_msgcnt(bundler_msg, msg_msgcnt(bundler_msg) + 1);
-	dbg("Packed msg # %u(%u octets) into pos %u in buf(#%u)\n",
-	    msg_msgcnt(bundler_msg), size, to_pos, msg_seqno(bundler_msg));
-	msg_dbg(msg, "PACKD:");
 	buf_discard(buf);
 	l_ptr->stats.sent_bundled++;
 	return 1;
@@ -991,7 +852,6 @@ int tipc_link_send_buf(struct link *l_ptr, struct sk_buff *buf)
 			return link_schedule_port(l_ptr, msg_origport(msg),
 						  size);
 		}
-		msg_dbg(msg, "TIPC: Congestion, throwing away\n");
 		buf_discard(buf);
 		if (imp > CONN_MANAGER) {
 			warn("Resetting link <%s>, send queue full", l_ptr->name);
@@ -1075,22 +935,16 @@ int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector)
 	int res = -ELINKCONG;
 
 	read_lock_bh(&tipc_net_lock);
-	n_ptr = tipc_node_select(dest, selector);
+	n_ptr = tipc_node_find(dest);
 	if (n_ptr) {
 		tipc_node_lock(n_ptr);
 		l_ptr = n_ptr->active_links[selector & 1];
-		if (l_ptr) {
-			dbg("tipc_link_send: found link %x for dest %x\n", l_ptr, dest);
+		if (l_ptr)
 			res = tipc_link_send_buf(l_ptr, buf);
-		} else {
-			dbg("Attempt to send msg to unreachable node:\n");
-			msg_dbg(buf_msg(buf),">>>");
+		else
 			buf_discard(buf);
-		}
 		tipc_node_unlock(n_ptr);
 	} else {
-		dbg("Attempt to send msg to unknown node:\n");
-		msg_dbg(buf_msg(buf),">>>");
 		buf_discard(buf);
 	}
 	read_unlock_bh(&tipc_net_lock);
@@ -1117,17 +971,14 @@ static int link_send_buf_fast(struct link *l_ptr, struct sk_buff *buf,
 				if (likely(tipc_bearer_send(l_ptr->b_ptr, buf,
 							    &l_ptr->media_addr))) {
 					l_ptr->unacked_window = 0;
-					msg_dbg(msg,"SENT_FAST:");
 					return res;
 				}
-				dbg("failed sent fast...\n");
 				tipc_bearer_schedule(l_ptr->b_ptr, l_ptr);
 				l_ptr->stats.bearer_congs++;
 				l_ptr->next_out = buf;
 				return res;
 			}
-		}
-		else
+		} else
 			*used_max_pkt = l_ptr->max_pkt;
 	}
 	return tipc_link_send_buf(l_ptr, buf);  /* All other cases */
@@ -1151,12 +1002,10 @@ int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode)
 		return tipc_port_recv_msg(buf);
 
 	read_lock_bh(&tipc_net_lock);
-	n_ptr = tipc_node_select(destnode, selector);
+	n_ptr = tipc_node_find(destnode);
 	if (likely(n_ptr)) {
 		tipc_node_lock(n_ptr);
 		l_ptr = n_ptr->active_links[selector];
-		dbg("send_fast: buf %x selected %x, destnode = %x\n",
-		    buf, l_ptr, destnode);
 		if (likely(l_ptr)) {
 			res = link_send_buf_fast(l_ptr, buf, &dummy);
 			tipc_node_unlock(n_ptr);
@@ -1200,7 +1049,7 @@ again:
 			!sender->user_port, &buf);
 
 	read_lock_bh(&tipc_net_lock);
-	node = tipc_node_select(destaddr, selector);
+	node = tipc_node_find(destaddr);
 	if (likely(node)) {
 		tipc_node_lock(node);
 		l_ptr = node->active_links[selector];
@@ -1283,10 +1132,10 @@ static int link_send_sections_long(struct port *sender,
 	struct tipc_node *node;
 	struct tipc_msg *hdr = &sender->publ.phdr;
 	u32 dsz = msg_data_sz(hdr);
-	u32 max_pkt,fragm_sz,rest;
+	u32 max_pkt, fragm_sz, rest;
 	struct tipc_msg fragm_hdr;
-	struct sk_buff *buf,*buf_chain,*prev;
-	u32 fragm_crs,fragm_rest,hsz,sect_rest;
+	struct sk_buff *buf, *buf_chain, *prev;
+	u32 fragm_crs, fragm_rest, hsz, sect_rest;
 	const unchar *sect_crs;
 	int curr_sect;
 	u32 fragm_no;
@@ -1306,7 +1155,6 @@ again:
 
 	/* Prepare reusable fragment header: */
 
-	msg_dbg(hdr, ">FRAGMENTING>");
 	tipc_msg_init(&fragm_hdr, MSG_FRAGMENTER, FIRST_FRAGMENT,
 		 INT_H_SIZE, msg_destnode(hdr));
 	msg_set_link_selector(&fragm_hdr, sender->publ.ref);
@@ -1322,7 +1170,6 @@ again:
 	skb_copy_to_linear_data(buf, &fragm_hdr, INT_H_SIZE);
 	hsz = msg_hdr_sz(hdr);
 	skb_copy_to_linear_data_offset(buf, INT_H_SIZE, hdr, hsz);
-	msg_dbg(buf_msg(buf), ">BUILD>");
 
 	/* Chop up message: */
 
@@ -1365,7 +1212,7 @@ error:
 			/* Initiate new fragment: */
 			if (rest <= fragm_sz) {
 				fragm_sz = rest;
-				msg_set_type(&fragm_hdr,LAST_FRAGMENT);
+				msg_set_type(&fragm_hdr, LAST_FRAGMENT);
 			} else {
 				msg_set_type(&fragm_hdr, FRAGMENT);
 			}
@@ -1381,16 +1228,14 @@ error:
 			skb_copy_to_linear_data(buf, &fragm_hdr, INT_H_SIZE);
 			fragm_crs = INT_H_SIZE;
 			fragm_rest = fragm_sz;
-			msg_dbg(buf_msg(buf),"  >BUILD>");
 		}
-	}
-	while (rest > 0);
+	} while (rest > 0);
 
 	/*
 	 * Now we have a buffer chain. Select a link and check
 	 * that packet size is still OK
 	 */
-	node = tipc_node_select(destaddr, sender->publ.ref & 1);
+	node = tipc_node_find(destaddr);
 	if (likely(node)) {
 		tipc_node_lock(node);
 		l_ptr = node->active_links[sender->publ.ref & 1];
@@ -1431,7 +1276,6 @@ reject:
 		l_ptr->stats.sent_fragments++;
 		msg_set_long_msgno(msg, l_ptr->long_msg_seq_no);
 		link_add_to_outqueue(l_ptr, buf, msg);
-		msg_dbg(msg, ">ADD>");
 		buf = next;
 	}
 
@@ -1473,14 +1317,12 @@ u32 tipc_link_push_packet(struct link *l_ptr)
 		msg_set_ack(buf_msg(buf), mod(l_ptr->next_in_no - 1));
 		msg_set_bcast_ack(buf_msg(buf), l_ptr->owner->bclink.last_in);
 		if (tipc_bearer_send(l_ptr->b_ptr, buf, &l_ptr->media_addr)) {
-			msg_dbg(buf_msg(buf), ">DEF-RETR>");
 			l_ptr->retransm_queue_head = mod(++r_q_head);
 			l_ptr->retransm_queue_size = --r_q_size;
 			l_ptr->stats.retransmitted++;
 			return 0;
 		} else {
 			l_ptr->stats.bearer_congs++;
-			msg_dbg(buf_msg(buf), "|>DEF-RETR>");
 			return PUSH_FAILED;
 		}
 	}
@@ -1490,15 +1332,13 @@ u32 tipc_link_push_packet(struct link *l_ptr)
 	buf = l_ptr->proto_msg_queue;
 	if (buf) {
 		msg_set_ack(buf_msg(buf), mod(l_ptr->next_in_no - 1));
-		msg_set_bcast_ack(buf_msg(buf),l_ptr->owner->bclink.last_in);
+		msg_set_bcast_ack(buf_msg(buf), l_ptr->owner->bclink.last_in);
 		if (tipc_bearer_send(l_ptr->b_ptr, buf, &l_ptr->media_addr)) {
-			msg_dbg(buf_msg(buf), ">DEF-PROT>");
 			l_ptr->unacked_window = 0;
 			buf_discard(buf);
 			l_ptr->proto_msg_queue = NULL;
 			return 0;
 		} else {
-			msg_dbg(buf_msg(buf), "|>DEF-PROT>");
 			l_ptr->stats.bearer_congs++;
 			return PUSH_FAILED;
 		}
@@ -1518,11 +1358,9 @@ u32 tipc_link_push_packet(struct link *l_ptr)
 			if (tipc_bearer_send(l_ptr->b_ptr, buf, &l_ptr->media_addr)) {
 				if (msg_user(msg) == MSG_BUNDLER)
 					msg_set_type(msg, CLOSED_MSG);
-				msg_dbg(msg, ">PUSH-DATA>");
 				l_ptr->next_out = buf->next;
 				return 0;
 			} else {
-				msg_dbg(msg, "|PUSH-DATA|");
 				l_ptr->stats.bearer_congs++;
 				return PUSH_FAILED;
 			}
@@ -1570,8 +1408,7 @@ static void link_reset_all(unsigned long addr)
 
 	for (i = 0; i < MAX_BEARERS; i++) {
 		if (n_ptr->links[i]) {
-			link_print(n_ptr->links[i], TIPC_OUTPUT,
-				   "Resetting link\n");
+			link_print(n_ptr->links[i], "Resetting link\n");
 			tipc_link_reset(n_ptr->links[i]);
 		}
 	}
@@ -1585,13 +1422,12 @@ static void link_retransmit_failure(struct link *l_ptr, struct sk_buff *buf)
 	struct tipc_msg *msg = buf_msg(buf);
 
 	warn("Retransmission failure on link <%s>\n", l_ptr->name);
-	tipc_msg_dbg(TIPC_OUTPUT, msg, ">RETR-FAIL>");
 
 	if (l_ptr->addr) {
 
 		/* Handle failure on standard link */
 
-		link_print(l_ptr, TIPC_OUTPUT, "Resetting link\n");
+		link_print(l_ptr, "Resetting link\n");
 		tipc_link_reset(l_ptr);
 
 	} else {
@@ -1601,21 +1437,21 @@ static void link_retransmit_failure(struct link *l_ptr, struct sk_buff *buf)
 		struct tipc_node *n_ptr;
 		char addr_string[16];
 
-		tipc_printf(TIPC_OUTPUT, "Msg seq number: %u,  ", msg_seqno(msg));
-		tipc_printf(TIPC_OUTPUT, "Outstanding acks: %lu\n",
-				     (unsigned long) TIPC_SKB_CB(buf)->handle);
+		info("Msg seq number: %u,  ", msg_seqno(msg));
+		info("Outstanding acks: %lu\n",
+		     (unsigned long) TIPC_SKB_CB(buf)->handle);
 
 		n_ptr = l_ptr->owner->next;
 		tipc_node_lock(n_ptr);
 
 		tipc_addr_string_fill(addr_string, n_ptr->addr);
-		tipc_printf(TIPC_OUTPUT, "Multicast link info for %s\n", addr_string);
-		tipc_printf(TIPC_OUTPUT, "Supported: %d,  ", n_ptr->bclink.supported);
-		tipc_printf(TIPC_OUTPUT, "Acked: %u\n", n_ptr->bclink.acked);
-		tipc_printf(TIPC_OUTPUT, "Last in: %u,  ", n_ptr->bclink.last_in);
-		tipc_printf(TIPC_OUTPUT, "Gap after: %u,  ", n_ptr->bclink.gap_after);
-		tipc_printf(TIPC_OUTPUT, "Gap to: %u\n", n_ptr->bclink.gap_to);
-		tipc_printf(TIPC_OUTPUT, "Nack sync: %u\n\n", n_ptr->bclink.nack_sync);
+		info("Multicast link info for %s\n", addr_string);
+		info("Supported: %d,  ", n_ptr->bclink.supported);
+		info("Acked: %u\n", n_ptr->bclink.acked);
+		info("Last in: %u,  ", n_ptr->bclink.last_in);
+		info("Gap after: %u,  ", n_ptr->bclink.gap_after);
+		info("Gap to: %u\n", n_ptr->bclink.gap_to);
+		info("Nack sync: %u\n\n", n_ptr->bclink.nack_sync);
 
 		tipc_k_signal((Handler)link_reset_all, (unsigned long)n_ptr->addr);
 
@@ -1635,12 +1471,8 @@ void tipc_link_retransmit(struct link *l_ptr, struct sk_buff *buf,
 
 	msg = buf_msg(buf);
 
-	dbg("Retransmitting %u in link %x\n", retransmits, l_ptr);
-
 	if (tipc_bearer_congested(l_ptr->b_ptr, l_ptr)) {
 		if (l_ptr->retransm_queue_size == 0) {
-			msg_dbg(msg, ">NO_RETR->BCONG>");
-			dbg_print_link(l_ptr, "   ");
 			l_ptr->retransm_queue_head = msg_seqno(msg);
 			l_ptr->retransm_queue_size = retransmits;
 		} else {
@@ -1667,7 +1499,6 @@ void tipc_link_retransmit(struct link *l_ptr, struct sk_buff *buf,
 		msg_set_ack(msg, mod(l_ptr->next_in_no - 1));
 		msg_set_bcast_ack(msg, l_ptr->owner->bclink.last_in);
 		if (tipc_bearer_send(l_ptr->b_ptr, buf, &l_ptr->media_addr)) {
-			msg_dbg(buf_msg(buf), ">RETR>");
 			buf = buf->next;
 			retransmits--;
 			l_ptr->stats.retransmitted++;
@@ -1793,9 +1624,8 @@ void tipc_recv_msg(struct sk_buff *head, struct tipc_bearer *tb_ptr)
 
 		/* Ensure message data is a single contiguous unit */
 
-		if (unlikely(buf_linearize(buf))) {
+		if (unlikely(buf_linearize(buf)))
 			goto cont;
-		}
 
 		/* Handle arrival of a non-unicast link message */
 
@@ -1907,7 +1737,7 @@ deliver:
 						continue;
 					case ROUTE_DISTRIBUTOR:
 						tipc_node_unlock(n_ptr);
-						tipc_cltr_recv_routing_table(buf);
+						buf_discard(buf);
 						continue;
 					case NAME_DISTRIBUTOR:
 						tipc_node_unlock(n_ptr);
@@ -1953,12 +1783,10 @@ deliver:
 			tipc_node_unlock(n_ptr);
 			continue;
 		}
-		msg_dbg(msg,"NSEQ<REC<");
 		link_state_event(l_ptr, TRAFFIC_MSG_EVT);
 
 		if (link_working_working(l_ptr)) {
 			/* Re-insert in front of queue */
-			msg_dbg(msg,"RECV-REINS:");
 			buf->next = head;
 			head = buf;
 			tipc_node_unlock(n_ptr);
@@ -2012,13 +1840,11 @@ u32 tipc_link_defer_pkt(struct sk_buff **head,
 				*head = buf;
 			return 1;
 		}
-		if (seq_no == msg_seqno(msg)) {
+		if (seq_no == msg_seqno(msg))
 			break;
-		}
 		prev = crs;
 		crs = crs->next;
-	}
-	while (crs);
+	} while (crs);
 
 	/* Message is a duplicate of an existing message */
 
@@ -2040,9 +1866,6 @@ static void link_handle_out_of_seq_msg(struct link *l_ptr,
 		return;
 	}
 
-	dbg("rx OOS msg: seq_no %u, expecting %u (%u)\n",
-	    seq_no, mod(l_ptr->next_in_no), l_ptr->next_in_no);
-
 	/* Record OOS packet arrival (force mismatch on next timeout) */
 
 	l_ptr->checkpoint--;
@@ -2132,11 +1955,10 @@ void tipc_link_send_proto_msg(struct link *l_ptr, u32 msg_typ, int probe_msg,
 		msg_set_max_pkt(msg, l_ptr->max_pkt_target);
 	}
 
-	if (tipc_node_has_redundant_links(l_ptr->owner)) {
+	if (tipc_node_has_redundant_links(l_ptr->owner))
 		msg_set_redundant_link(msg);
-	} else {
+	else
 		msg_clear_redundant_link(msg);
-	}
 	msg_set_linkprio(msg, l_ptr->priority);
 
 	/* Ensure sequence number will not fit : */
@@ -2160,8 +1982,6 @@ void tipc_link_send_proto_msg(struct link *l_ptr, u32 msg_typ, int probe_msg,
 
 	/* Message can be sent */
 
-	msg_dbg(msg, ">>");
-
 	buf = tipc_buf_acquire(msg_size);
 	if (!buf)
 		return;
@@ -2195,8 +2015,6 @@ static void link_recv_proto_msg(struct link *l_ptr, struct sk_buff *buf)
 	u32 msg_tol;
 	struct tipc_msg *msg = buf_msg(buf);
 
-	dbg("AT(%u):", jiffies_to_msecs(jiffies));
-	msg_dbg(msg, "<<");
 	if (link_blocked(l_ptr))
 		goto exit;
 
@@ -2215,11 +2033,8 @@ static void link_recv_proto_msg(struct link *l_ptr, struct sk_buff *buf)
 	case RESET_MSG:
 		if (!link_working_unknown(l_ptr) &&
 		    (l_ptr->peer_session != INVALID_SESSION)) {
-			if (msg_session(msg) == l_ptr->peer_session) {
-				dbg("Duplicate RESET: %u<->%u\n",
-				    msg_session(msg), l_ptr->peer_session);
+			if (msg_session(msg) == l_ptr->peer_session)
 				break; /* duplicate: ignore */
-			}
 		}
 		/* fall thru' */
 	case ACTIVATE_MSG:
@@ -2227,8 +2042,8 @@ static void link_recv_proto_msg(struct link *l_ptr, struct sk_buff *buf)
 
 		strcpy((strrchr(l_ptr->name, ':') + 1), (char *)msg_data(msg));
 
-		if ((msg_tol = msg_link_tolerance(msg)) &&
-		    (msg_tol > l_ptr->tolerance))
+		msg_tol = msg_link_tolerance(msg);
+		if (msg_tol > l_ptr->tolerance)
 			link_set_supervision_props(l_ptr, msg_tol);
 
 		if (msg_linkprio(msg) > l_ptr->priority)
@@ -2251,13 +2066,13 @@ static void link_recv_proto_msg(struct link *l_ptr, struct sk_buff *buf)
 		l_ptr->peer_bearer_id = msg_bearer_id(msg);
 
 		/* Synchronize broadcast sequence numbers */
-		if (!tipc_node_has_redundant_links(l_ptr->owner)) {
+		if (!tipc_node_has_redundant_links(l_ptr->owner))
 			l_ptr->owner->bclink.last_in = mod(msg_last_bcast(msg));
-		}
 		break;
 	case STATE_MSG:
 
-		if ((msg_tol = msg_link_tolerance(msg)))
+		msg_tol = msg_link_tolerance(msg);
+		if (msg_tol)
 			link_set_supervision_props(l_ptr, msg_tol);
 
 		if (msg_linkprio(msg) &&
@@ -2280,8 +2095,6 @@ static void link_recv_proto_msg(struct link *l_ptr, struct sk_buff *buf)
 
 		max_pkt_ack = msg_max_pkt(msg);
 		if (max_pkt_ack > l_ptr->max_pkt) {
-			dbg("Link <%s> updated MTU %u -> %u\n",
-			    l_ptr->name, l_ptr->max_pkt, max_pkt_ack);
 			l_ptr->max_pkt = max_pkt_ack;
 			l_ptr->max_pkt_probes = 0;
 		}
@@ -2289,9 +2102,8 @@ static void link_recv_proto_msg(struct link *l_ptr, struct sk_buff *buf)
 		max_pkt_ack = 0;
 		if (msg_probe(msg)) {
 			l_ptr->stats.recv_probes++;
-			if (msg_size(msg) > sizeof(l_ptr->proto_msg)) {
+			if (msg_size(msg) > sizeof(l_ptr->proto_msg))
 				max_pkt_ack = msg_size(msg);
-			}
 		}
 
 		/* Protocol message before retransmits, reduce loss risk */
@@ -2303,14 +2115,11 @@ static void link_recv_proto_msg(struct link *l_ptr, struct sk_buff *buf)
 						 0, rec_gap, 0, 0, max_pkt_ack);
 		}
 		if (msg_seq_gap(msg)) {
-			msg_dbg(msg, "With Gap:");
 			l_ptr->stats.recv_nacks++;
 			tipc_link_retransmit(l_ptr, l_ptr->first_out,
 					     msg_seq_gap(msg));
 		}
 		break;
-	default:
-		msg_dbg(buf_msg(buf), "<DISCARDING UNKNOWN<");
 	}
 exit:
 	buf_discard(buf);
@@ -2345,8 +2154,6 @@ static void tipc_link_tunnel(struct link *l_ptr,
 	}
 	skb_copy_to_linear_data(buf, tunnel_hdr, INT_H_SIZE);
 	skb_copy_to_linear_data_offset(buf, INT_H_SIZE, msg, length);
-	dbg("%c->%c:", l_ptr->b_ptr->net_plane, tunnel->b_ptr->net_plane);
-	msg_dbg(buf_msg(buf), ">SEND>");
 	tipc_link_send_buf(tunnel, buf);
 }
 
@@ -2378,7 +2185,6 @@ void tipc_link_changeover(struct link *l_ptr)
 		 ORIGINAL_MSG, INT_H_SIZE, l_ptr->addr);
 	msg_set_bearer_id(&tunnel_hdr, l_ptr->peer_bearer_id);
 	msg_set_msgcnt(&tunnel_hdr, msgcount);
-	dbg("Link changeover requires %u tunnel messages\n", msgcount);
 
 	if (!l_ptr->first_out) {
 		struct sk_buff *buf;
@@ -2387,9 +2193,6 @@ void tipc_link_changeover(struct link *l_ptr)
 		if (buf) {
 			skb_copy_to_linear_data(buf, &tunnel_hdr, INT_H_SIZE);
 			msg_set_size(&tunnel_hdr, INT_H_SIZE);
-			dbg("%c->%c:", l_ptr->b_ptr->net_plane,
-			    tunnel->b_ptr->net_plane);
-			msg_dbg(&tunnel_hdr, "EMPTY>SEND>");
 			tipc_link_send_buf(tunnel, buf);
 		} else {
 			warn("Link changeover error, "
@@ -2406,11 +2209,11 @@ void tipc_link_changeover(struct link *l_ptr)
 
 		if ((msg_user(msg) == MSG_BUNDLER) && split_bundles) {
 			struct tipc_msg *m = msg_get_wrapped(msg);
-			unchar* pos = (unchar*)m;
+			unchar *pos = (unchar *)m;
 
 			msgcount = msg_msgcnt(msg);
 			while (msgcount--) {
-				msg_set_seqno(m,msg_seqno(msg));
+				msg_set_seqno(m, msg_seqno(msg));
 				tipc_link_tunnel(l_ptr, &tunnel_hdr, m,
 						 msg_link_selector(m));
 				pos += align(msg_size(m));
@@ -2453,9 +2256,6 @@ void tipc_link_send_duplicate(struct link *l_ptr, struct link *tunnel)
 		skb_copy_to_linear_data(outbuf, &tunnel_hdr, INT_H_SIZE);
 		skb_copy_to_linear_data_offset(outbuf, INT_H_SIZE, iter->data,
 					       length);
-		dbg("%c->%c:", l_ptr->b_ptr->net_plane,
-		    tunnel->b_ptr->net_plane);
-		msg_dbg(buf_msg(outbuf), ">SEND>");
 		tipc_link_send_buf(tunnel, outbuf);
 		if (!tipc_link_is_up(l_ptr))
 			return;
@@ -2502,31 +2302,24 @@ static int link_recv_changeover_msg(struct link **l_ptr,
 	u32 msg_count = msg_msgcnt(tunnel_msg);
 
 	dest_link = (*l_ptr)->owner->links[msg_bearer_id(tunnel_msg)];
-	if (!dest_link) {
-		msg_dbg(tunnel_msg, "NOLINK/<REC<");
+	if (!dest_link)
 		goto exit;
-	}
 	if (dest_link == *l_ptr) {
 		err("Unexpected changeover message on link <%s>\n",
 		    (*l_ptr)->name);
 		goto exit;
 	}
-	dbg("%c<-%c:", dest_link->b_ptr->net_plane,
-	    (*l_ptr)->b_ptr->net_plane);
 	*l_ptr = dest_link;
 	msg = msg_get_wrapped(tunnel_msg);
 
 	if (msg_typ == DUPLICATE_MSG) {
-		if (less(msg_seqno(msg), mod(dest_link->next_in_no))) {
-			msg_dbg(tunnel_msg, "DROP/<REC<");
+		if (less(msg_seqno(msg), mod(dest_link->next_in_no)))
 			goto exit;
-		}
-		*buf = buf_extract(tunnel_buf,INT_H_SIZE);
+		*buf = buf_extract(tunnel_buf, INT_H_SIZE);
 		if (*buf == NULL) {
 			warn("Link changeover error, duplicate msg dropped\n");
 			goto exit;
 		}
-		msg_dbg(tunnel_msg, "TNL<REC<");
 		buf_discard(tunnel_buf);
 		return 1;
 	}
@@ -2534,18 +2327,14 @@ static int link_recv_changeover_msg(struct link **l_ptr,
 	/* First original message ?: */
 
 	if (tipc_link_is_up(dest_link)) {
-		msg_dbg(tunnel_msg, "UP/FIRST/<REC<");
 		info("Resetting link <%s>, changeover initiated by peer\n",
 		     dest_link->name);
 		tipc_link_reset(dest_link);
 		dest_link->exp_msg_count = msg_count;
-		dbg("Expecting %u tunnelled messages\n", msg_count);
 		if (!msg_count)
 			goto exit;
 	} else if (dest_link->exp_msg_count == START_CHANGEOVER) {
-		msg_dbg(tunnel_msg, "BLK/FIRST/<REC<");
 		dest_link->exp_msg_count = msg_count;
-		dbg("Expecting %u tunnelled messages\n", msg_count);
 		if (!msg_count)
 			goto exit;
 	}
@@ -2555,18 +2344,14 @@ static int link_recv_changeover_msg(struct link **l_ptr,
 	if (dest_link->exp_msg_count == 0) {
 		warn("Link switchover error, "
 		     "got too many tunnelled messages\n");
-		msg_dbg(tunnel_msg, "OVERDUE/DROP/<REC<");
-		dbg_print_link(dest_link, "LINK:");
 		goto exit;
 	}
 	dest_link->exp_msg_count--;
 	if (less(msg_seqno(msg), dest_link->reset_checkpoint)) {
-		msg_dbg(tunnel_msg, "DROP/DUPL/<REC<");
 		goto exit;
 	} else {
 		*buf = buf_extract(tunnel_buf, INT_H_SIZE);
 		if (*buf != NULL) {
-			msg_dbg(tunnel_msg, "TNL<REC<");
 			buf_discard(tunnel_buf);
 			return 1;
 		} else {
@@ -2588,7 +2373,6 @@ void tipc_link_recv_bundle(struct sk_buff *buf)
 	u32 pos = INT_H_SIZE;
 	struct sk_buff *obuf;
 
-	msg_dbg(buf_msg(buf), "<BNDL<: ");
 	while (msgcount--) {
 		obuf = buf_extract(buf, pos);
 		if (obuf == NULL) {
@@ -2596,7 +2380,6 @@ void tipc_link_recv_bundle(struct sk_buff *buf)
 			break;
 		}
 		pos += align(msg_size(buf_msg(obuf)));
-		msg_dbg(buf_msg(obuf), "     /");
 		tipc_net_route_msg(obuf);
 	}
 	buf_discard(buf);
@@ -2733,7 +2516,6 @@ int tipc_link_recv_fragment(struct sk_buff **pending, struct sk_buff **fb,
 	u32 long_msg_seq_no = msg_long_msgno(fragm);
 
 	*fb = NULL;
-	msg_dbg(fragm,"FRG<REC<");
 
 	/* Is there an incomplete message waiting for this fragment? */
 
@@ -2752,7 +2534,6 @@ int tipc_link_recv_fragment(struct sk_buff **pending, struct sk_buff **fb,
 		if (msg_type(imsg) == TIPC_MCAST_MSG)
 			max = TIPC_MAX_USER_MSG_SIZE + MCAST_H_SIZE;
 		if (msg_size(imsg) > max) {
-			msg_dbg(fragm,"<REC<Oversized: ");
 			buf_discard(fbuf);
 			return 0;
 		}
@@ -2765,8 +2546,8 @@ int tipc_link_recv_fragment(struct sk_buff **pending, struct sk_buff **fb,
 			/*  Prepare buffer for subsequent fragments. */
 
 			set_long_msg_seqno(pbuf, long_msg_seq_no);
-			set_fragm_size(pbuf,fragm_sz);
-			set_expected_frags(pbuf,exp_fragm_cnt - 1);
+			set_fragm_size(pbuf, fragm_sz);
+			set_expected_frags(pbuf, exp_fragm_cnt - 1);
 		} else {
 			warn("Link unable to reassemble fragmented message\n");
 		}
@@ -2793,13 +2574,9 @@ int tipc_link_recv_fragment(struct sk_buff **pending, struct sk_buff **fb,
 			*m = buf_msg(pbuf);
 			return 1;
 		}
-		set_expected_frags(pbuf,exp_frags);
+		set_expected_frags(pbuf, exp_frags);
 		return 0;
 	}
-	dbg(" Discarding orphan fragment %x\n",fbuf);
-	msg_dbg(fragm,"ORPHAN:");
-	dbg("Pending long buffers:\n");
-	dbg_print_buf_chain(*pending);
 	buf_discard(fbuf);
 	return 0;
 }
@@ -2827,11 +2604,6 @@ static void link_check_defragm_bufs(struct link *l_ptr)
 			incr_timer_cnt(buf);
 			prev = buf;
 		} else {
-			dbg(" Discarding incomplete long buffer\n");
-			msg_dbg(buf_msg(buf), "LONG:");
-			dbg_print_link(l_ptr, "curr:");
-			dbg("Pending long buffers:\n");
-			dbg_print_buf_chain(l_ptr->defragm_buf);
 			if (prev)
 				prev->next = buf->next;
 			else
@@ -2866,7 +2638,6 @@ void tipc_link_set_queue_limits(struct link *l_ptr, u32 window)
 	l_ptr->queue_limit[TIPC_HIGH_IMPORTANCE + 4] = 900;
 	l_ptr->queue_limit[TIPC_CRITICAL_IMPORTANCE + 4] = 1200;
 	l_ptr->queue_limit[CONN_MANAGER] = 1200;
-	l_ptr->queue_limit[ROUTE_DISTRIBUTOR] = 1200;
 	l_ptr->queue_limit[CHANGEOVER_PROTOCOL] = 2500;
 	l_ptr->queue_limit[NAME_DISTRIBUTOR] = 3000;
 	/* FRAGMENT and LAST_FRAGMENT packets */
@@ -3168,7 +2939,7 @@ u32 tipc_link_get_max_pkt(u32 dest, u32 selector)
 		return MAX_MSG_SIZE;
 
 	read_lock_bh(&tipc_net_lock);
-	n_ptr = tipc_node_select(dest, selector);
+	n_ptr = tipc_node_find(dest);
 	if (n_ptr) {
 		tipc_node_lock(n_ptr);
 		l_ptr = n_ptr->active_links[selector & 1];
@@ -3180,27 +2951,22 @@ u32 tipc_link_get_max_pkt(u32 dest, u32 selector)
 	return res;
 }
 
-static void link_dump_send_queue(struct link *l_ptr)
+static void link_print(struct link *l_ptr, const char *str)
 {
-	if (l_ptr->next_out) {
-		info("\nContents of unsent queue:\n");
-		dbg_print_buf_chain(l_ptr->next_out);
-	}
-	info("\nContents of send queue:\n");
-	if (l_ptr->first_out) {
-		dbg_print_buf_chain(l_ptr->first_out);
-	}
-	info("Empty send queue\n");
-}
+	char print_area[256];
+	struct print_buf pb;
+	struct print_buf *buf = &pb;
+
+	tipc_printbuf_init(buf, print_area, sizeof(print_area));
 
-static void link_print(struct link *l_ptr, struct print_buf *buf,
-		       const char *str)
-{
 	tipc_printf(buf, str);
-	if (link_reset_reset(l_ptr) || link_reset_unknown(l_ptr))
-		return;
 	tipc_printf(buf, "Link %x<%s>:",
 		    l_ptr->addr, l_ptr->b_ptr->publ.name);
+
+#ifdef CONFIG_TIPC_DEBUG
+	if (link_reset_reset(l_ptr) || link_reset_unknown(l_ptr))
+		goto print_state;
+
 	tipc_printf(buf, ": NXO(%u):", mod(l_ptr->next_out_no));
 	tipc_printf(buf, "NXI(%u):", mod(l_ptr->next_in_no));
 	tipc_printf(buf, "SQUE");
@@ -3218,7 +2984,6 @@ static void link_print(struct link *l_ptr, struct print_buf *buf,
 			tipc_printf(buf, "first_out= %x ", l_ptr->first_out);
 			tipc_printf(buf, "next_out= %x ", l_ptr->next_out);
 			tipc_printf(buf, "last_out= %x ", l_ptr->last_out);
-			link_dump_send_queue(l_ptr);
 		}
 	} else
 		tipc_printf(buf, "[]");
@@ -3232,14 +2997,20 @@ static void link_print(struct link *l_ptr, struct print_buf *buf,
 				    l_ptr->deferred_inqueue_sz);
 		}
 	}
+print_state:
+#endif
+
 	if (link_working_unknown(l_ptr))
 		tipc_printf(buf, ":WU");
-	if (link_reset_reset(l_ptr))
+	else if (link_reset_reset(l_ptr))
 		tipc_printf(buf, ":RR");
-	if (link_reset_unknown(l_ptr))
+	else if (link_reset_unknown(l_ptr))
 		tipc_printf(buf, ":RU");
-	if (link_working_working(l_ptr))
+	else if (link_working_working(l_ptr))
 		tipc_printf(buf, ":WW");
 	tipc_printf(buf, "\n");
+
+	tipc_printbuf_validate(buf);
+	info("%s", print_area);
 }
 
diff --git a/net/tipc/link.h b/net/tipc/link.h
index f98bc613de6..70967e63702 100644
--- a/net/tipc/link.h
+++ b/net/tipc/link.h
@@ -37,9 +37,8 @@
 #ifndef _TIPC_LINK_H
 #define _TIPC_LINK_H
 
-#include "dbg.h"
+#include "log.h"
 #include "msg.h"
-#include "bearer.h"
 #include "node.h"
 
 #define PUSH_FAILED   1
@@ -108,7 +107,6 @@
  * @long_msg_seq_no: next identifier to use for outbound fragmented messages
  * @defragm_buf: list of partially reassembled inbound message fragments
  * @stats: collects statistics regarding link activity
- * @print_buf: print buffer used to log link activity
  */
 
 struct link {
@@ -211,8 +209,6 @@ struct link {
 		u32 msg_lengths_total;
 		u32 msg_length_profile[7];
 	} stats;
-
-	struct print_buf print_buf;
 };
 
 struct port;
@@ -233,8 +229,8 @@ struct sk_buff *tipc_link_cmd_reset_stats(const void *req_tlv_area, int req_tlv_
 void tipc_link_reset(struct link *l_ptr);
 int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector);
 int tipc_link_send_buf(struct link *l_ptr, struct sk_buff *buf);
-u32 tipc_link_get_max_pkt(u32 dest,u32 selector);
-int tipc_link_send_sections_fast(struct port* sender,
+u32 tipc_link_get_max_pkt(u32 dest, u32 selector);
+int tipc_link_send_sections_fast(struct port *sender,
 				 struct iovec const *msg_sect,
 				 const u32 num_sect,
 				 u32 destnode);
diff --git a/net/tipc/dbg.c b/net/tipc/log.c
index 46f51d208e5..952c39f643e 100644
--- a/net/tipc/dbg.c
+++ b/net/tipc/log.c
@@ -1,5 +1,5 @@
 /*
- * net/tipc/dbg.c: TIPC print buffer routines for debugging
+ * net/tipc/log.c: TIPC print buffer routines for debugging
  *
  * Copyright (c) 1996-2006, Ericsson AB
  * Copyright (c) 2005-2007, Wind River Systems
@@ -36,7 +36,7 @@
 
 #include "core.h"
 #include "config.h"
-#include "dbg.h"
+#include "log.h"
 
 /*
  * TIPC pre-defines the following print buffers:
@@ -52,7 +52,7 @@ static struct print_buf null_buf = { NULL, 0, NULL, 0 };
 struct print_buf *const TIPC_NULL = &null_buf;
 
 static struct print_buf cons_buf = { NULL, 0, NULL, 1 };
-static struct print_buf *const TIPC_CONS = &cons_buf;
+struct print_buf *const TIPC_CONS = &cons_buf;
 
 static struct print_buf log_buf = { NULL, 0, NULL, 1 };
 struct print_buf *const TIPC_LOG = &log_buf;
@@ -64,9 +64,9 @@ struct print_buf *const TIPC_LOG = &log_buf;
  * 'print_string' when writing to a print buffer. This also protects against
  * concurrent writes to the print buffer being written to.
  *
- * 2) tipc_dump() and tipc_log_XXX() leverage the aforementioned
- * use of 'print_lock' to protect against all types of concurrent operations
- * on their associated print buffer (not just write operations).
+ * 2) tipc_log_XXX() leverages the aforementioned use of 'print_lock' to
+ * protect against all types of concurrent operations on their associated
+ * print buffer (not just write operations).
  *
  * Note: All routines of the form tipc_printbuf_XXX() are lock-free, and rely
  * on the caller to prevent simultaneous use of the print buffer(s) being
@@ -76,18 +76,16 @@ struct print_buf *const TIPC_LOG = &log_buf;
 static char print_string[TIPC_PB_MAX_STR];
 static DEFINE_SPINLOCK(print_lock);
 
-static void tipc_printbuf_reset(struct print_buf *pb);
-static int  tipc_printbuf_empty(struct print_buf *pb);
 static void tipc_printbuf_move(struct print_buf *pb_to,
 			       struct print_buf *pb_from);
 
-#define FORMAT(PTR,LEN,FMT) \
+#define FORMAT(PTR, LEN, FMT) \
 {\
-       va_list args;\
-       va_start(args, FMT);\
-       LEN = vsprintf(PTR, FMT, args);\
-       va_end(args);\
-       *(PTR + LEN) = '\0';\
+	va_list args;\
+	va_start(args, FMT);\
+	LEN = vsprintf(PTR, FMT, args);\
+	va_end(args);\
+	*(PTR + LEN) = '\0';\
 }
 
 /**
@@ -268,81 +266,6 @@ void tipc_printf(struct print_buf *pb, const char *fmt, ...)
 	spin_unlock_bh(&print_lock);
 }
 
-#ifdef CONFIG_TIPC_DEBUG
-
-/**
- * print_to_console - write string of bytes to console in multiple chunks
- */
-
-static void print_to_console(char *crs, int len)
-{
-	int rest = len;
-
-	while (rest > 0) {
-		int sz = rest < TIPC_PB_MAX_STR ? rest : TIPC_PB_MAX_STR;
-		char c = crs[sz];
-
-		crs[sz] = 0;
-		printk((const char *)crs);
-		crs[sz] = c;
-		rest -= sz;
-		crs += sz;
-	}
-}
-
-/**
- * printbuf_dump - write print buffer contents to console
- */
-
-static void printbuf_dump(struct print_buf *pb)
-{
-	int len;
-
-	if (!pb->buf) {
-		printk("*** PRINT BUFFER NOT ALLOCATED ***");
-		return;
-	}
-
-	/* Dump print buffer from char after cursor to end (if used) */
-
-	len = pb->buf + pb->size - pb->crs - 2;
-	if ((pb->buf[pb->size - 1] == 0) && (len > 0))
-		print_to_console(pb->crs + 1, len);
-
-	/* Dump print buffer from start to cursor (always) */
-
-	len = pb->crs - pb->buf;
-	print_to_console(pb->buf, len);
-}
-
-/**
- * tipc_dump_dbg - dump (non-console) print buffer to console
- * @pb: pointer to print buffer
- */
-
-void tipc_dump_dbg(struct print_buf *pb, const char *fmt, ...)
-{
-	int len;
-
-	if (pb == TIPC_CONS)
-		return;
-
-	spin_lock_bh(&print_lock);
-
-	FORMAT(print_string, len, fmt);
-	printk(print_string);
-
-	printk("\n---- Start of %s log dump ----\n\n",
-	       (pb == TIPC_LOG) ? "global" : "local");
-	printbuf_dump(pb);
-	tipc_printbuf_reset(pb);
-	printk("\n---- End of dump ----\n");
-
-	spin_unlock_bh(&print_lock);
-}
-
-#endif
-
 /**
  * tipc_log_resize - change the size of the TIPC log buffer
  * @log_size: print buffer size to use
@@ -353,10 +276,8 @@ int tipc_log_resize(int log_size)
 	int res = 0;
 
 	spin_lock_bh(&print_lock);
-	if (TIPC_LOG->buf) {
-		kfree(TIPC_LOG->buf);
-		TIPC_LOG->buf = NULL;
-	}
+	kfree(TIPC_LOG->buf);
+	TIPC_LOG->buf = NULL;
 	if (log_size) {
 		if (log_size < TIPC_PB_MIN_SIZE)
 			log_size = TIPC_PB_MIN_SIZE;
@@ -407,8 +328,7 @@ struct sk_buff *tipc_log_dump(void)
 	} else if (tipc_printbuf_empty(TIPC_LOG)) {
 		spin_unlock_bh(&print_lock);
 		reply = tipc_cfg_reply_ultra_string("log is empty\n");
-	}
-	else {
+	} else {
 		struct tlv_desc *rep_tlv;
 		struct print_buf pb;
 		int str_len;
@@ -429,4 +349,3 @@ struct sk_buff *tipc_log_dump(void)
 	}
 	return reply;
 }
-
diff --git a/net/tipc/dbg.h b/net/tipc/log.h
index 3ba6ba8b434..2248d96238e 100644
--- a/net/tipc/dbg.h
+++ b/net/tipc/log.h
@@ -1,5 +1,5 @@
 /*
- * net/tipc/dbg.h: Include file for TIPC print buffer routines
+ * net/tipc/log.h: Include file for TIPC print buffer routines
  *
  * Copyright (c) 1997-2006, Ericsson AB
  * Copyright (c) 2005-2007, Wind River Systems
@@ -34,8 +34,8 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#ifndef _TIPC_DBG_H
-#define _TIPC_DBG_H
+#ifndef _TIPC_LOG_H
+#define _TIPC_LOG_H
 
 /**
  * struct print_buf - TIPC print buffer structure
diff --git a/net/tipc/msg.c b/net/tipc/msg.c
index ecb532fb035..bb6180c4fcb 100644
--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -35,10 +35,7 @@
  */
 
 #include "core.h"
-#include "addr.h"
-#include "dbg.h"
 #include "msg.h"
-#include "bearer.h"
 
 u32 tipc_msg_tot_importance(struct tipc_msg *m)
 {
@@ -94,7 +91,7 @@ int tipc_msg_calc_data_size(struct iovec const *msg_sect, u32 num_sect)
 
 int tipc_msg_build(struct tipc_msg *hdr,
 			    struct iovec const *msg_sect, u32 num_sect,
-			    int max_size, int usrmem, struct sk_buff** buf)
+			    int max_size, int usrmem, struct sk_buff **buf)
 {
 	int dsz, sz, hsz, pos, res, cnt;
 
@@ -140,6 +137,7 @@ int tipc_msg_build(struct tipc_msg *hdr,
 void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 {
 	u32 usr = msg_user(msg);
+	tipc_printf(buf, KERN_DEBUG);
 	tipc_printf(buf, str);
 
 	switch (usr) {
@@ -163,10 +161,10 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 			tipc_printf(buf, "LAST:");
 			break;
 		default:
-			tipc_printf(buf, "UNKNOWN:%x",msg_type(msg));
+			tipc_printf(buf, "UNKNOWN:%x", msg_type(msg));
 
 		}
-		tipc_printf(buf, "NO(%u/%u):",msg_long_msgno(msg),
+		tipc_printf(buf, "NO(%u/%u):", msg_long_msgno(msg),
 			    msg_fragm_no(msg));
 		break;
 	case TIPC_LOW_IMPORTANCE:
@@ -192,7 +190,7 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 			tipc_printf(buf, "DIR:");
 			break;
 		default:
-			tipc_printf(buf, "UNKNOWN TYPE %u",msg_type(msg));
+			tipc_printf(buf, "UNKNOWN TYPE %u", msg_type(msg));
 		}
 		if (msg_routed(msg) && !msg_non_seq(msg))
 			tipc_printf(buf, "ROUT:");
@@ -210,7 +208,7 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 			tipc_printf(buf, "WDRW:");
 			break;
 		default:
-			tipc_printf(buf, "UNKNOWN:%x",msg_type(msg));
+			tipc_printf(buf, "UNKNOWN:%x", msg_type(msg));
 		}
 		if (msg_routed(msg))
 			tipc_printf(buf, "ROUT:");
@@ -229,39 +227,39 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 			break;
 		case CONN_ACK:
 			tipc_printf(buf, "CONN_ACK:");
-			tipc_printf(buf, "ACK(%u):",msg_msgcnt(msg));
+			tipc_printf(buf, "ACK(%u):", msg_msgcnt(msg));
 			break;
 		default:
-			tipc_printf(buf, "UNKNOWN TYPE:%x",msg_type(msg));
+			tipc_printf(buf, "UNKNOWN TYPE:%x", msg_type(msg));
 		}
 		if (msg_routed(msg))
 			tipc_printf(buf, "ROUT:");
 		if (msg_reroute_cnt(msg))
-			tipc_printf(buf, "REROUTED(%u):",msg_reroute_cnt(msg));
+			tipc_printf(buf, "REROUTED(%u):", msg_reroute_cnt(msg));
 		break;
 	case LINK_PROTOCOL:
-		tipc_printf(buf, "PROT:TIM(%u):",msg_timestamp(msg));
+		tipc_printf(buf, "PROT:TIM(%u):", msg_timestamp(msg));
 		switch (msg_type(msg)) {
 		case STATE_MSG:
 			tipc_printf(buf, "STATE:");
-			tipc_printf(buf, "%s:",msg_probe(msg) ? "PRB" :"");
-			tipc_printf(buf, "NXS(%u):",msg_next_sent(msg));
-			tipc_printf(buf, "GAP(%u):",msg_seq_gap(msg));
-			tipc_printf(buf, "LSTBC(%u):",msg_last_bcast(msg));
+			tipc_printf(buf, "%s:", msg_probe(msg) ? "PRB" : "");
+			tipc_printf(buf, "NXS(%u):", msg_next_sent(msg));
+			tipc_printf(buf, "GAP(%u):", msg_seq_gap(msg));
+			tipc_printf(buf, "LSTBC(%u):", msg_last_bcast(msg));
 			break;
 		case RESET_MSG:
 			tipc_printf(buf, "RESET:");
 			if (msg_size(msg) != msg_hdr_sz(msg))
-				tipc_printf(buf, "BEAR:%s:",msg_data(msg));
+				tipc_printf(buf, "BEAR:%s:", msg_data(msg));
 			break;
 		case ACTIVATE_MSG:
 			tipc_printf(buf, "ACTIVATE:");
 			break;
 		default:
-			tipc_printf(buf, "UNKNOWN TYPE:%x",msg_type(msg));
+			tipc_printf(buf, "UNKNOWN TYPE:%x", msg_type(msg));
 		}
-		tipc_printf(buf, "PLANE(%c):",msg_net_plane(msg));
-		tipc_printf(buf, "SESS(%u):",msg_session(msg));
+		tipc_printf(buf, "PLANE(%c):", msg_net_plane(msg));
+		tipc_printf(buf, "SESS(%u):", msg_session(msg));
 		break;
 	case CHANGEOVER_PROTOCOL:
 		tipc_printf(buf, "TUNL:");
@@ -271,10 +269,10 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 			break;
 		case ORIGINAL_MSG:
 			tipc_printf(buf, "ORIG:");
-			tipc_printf(buf, "EXP(%u)",msg_msgcnt(msg));
+			tipc_printf(buf, "EXP(%u)", msg_msgcnt(msg));
 			break;
 		default:
-			tipc_printf(buf, "UNKNOWN TYPE:%x",msg_type(msg));
+			tipc_printf(buf, "UNKNOWN TYPE:%x", msg_type(msg));
 		}
 		break;
 	case ROUTE_DISTRIBUTOR:
@@ -282,26 +280,26 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 		switch (msg_type(msg)) {
 		case EXT_ROUTING_TABLE:
 			tipc_printf(buf, "EXT_TBL:");
-			tipc_printf(buf, "TO:%x:",msg_remote_node(msg));
+			tipc_printf(buf, "TO:%x:", msg_remote_node(msg));
 			break;
 		case LOCAL_ROUTING_TABLE:
 			tipc_printf(buf, "LOCAL_TBL:");
-			tipc_printf(buf, "TO:%x:",msg_remote_node(msg));
+			tipc_printf(buf, "TO:%x:", msg_remote_node(msg));
 			break;
 		case SLAVE_ROUTING_TABLE:
 			tipc_printf(buf, "DP_TBL:");
-			tipc_printf(buf, "TO:%x:",msg_remote_node(msg));
+			tipc_printf(buf, "TO:%x:", msg_remote_node(msg));
 			break;
 		case ROUTE_ADDITION:
 			tipc_printf(buf, "ADD:");
-			tipc_printf(buf, "TO:%x:",msg_remote_node(msg));
+			tipc_printf(buf, "TO:%x:", msg_remote_node(msg));
 			break;
 		case ROUTE_REMOVAL:
 			tipc_printf(buf, "REMOVE:");
-			tipc_printf(buf, "TO:%x:",msg_remote_node(msg));
+			tipc_printf(buf, "TO:%x:", msg_remote_node(msg));
 			break;
 		default:
-			tipc_printf(buf, "UNKNOWN TYPE:%x",msg_type(msg));
+			tipc_printf(buf, "UNKNOWN TYPE:%x", msg_type(msg));
 		}
 		break;
 	case LINK_CONFIG:
@@ -314,7 +312,7 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 			tipc_printf(buf, "DSC_RESP:");
 			break;
 		default:
-			tipc_printf(buf, "UNKNOWN TYPE:%x:",msg_type(msg));
+			tipc_printf(buf, "UNKNOWN TYPE:%x:", msg_type(msg));
 			break;
 		}
 		break;
@@ -350,7 +348,8 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 			tipc_printf(buf, "UNKNOWN ERROR(%x):",
 				    msg_errcode(msg));
 		}
-	default:{}
+	default:
+		break;
 	}
 
 	tipc_printf(buf, "HZ(%u):", msg_hdr_sz(msg));
@@ -359,9 +358,8 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 
 	if (msg_non_seq(msg))
 		tipc_printf(buf, "NOSEQ:");
-	else {
+	else
 		tipc_printf(buf, "ACK(%u):", msg_ack(msg));
-	}
 	tipc_printf(buf, "BACK(%u):", msg_bcast_ack(msg));
 	tipc_printf(buf, "PRND(%x)", msg_prevnode(msg));
 
@@ -389,14 +387,13 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 	if (msg_user(msg) == NAME_DISTRIBUTOR) {
 		tipc_printf(buf, ":ONOD(%x):", msg_orignode(msg));
 		tipc_printf(buf, ":DNOD(%x):", msg_destnode(msg));
-		if (msg_routed(msg)) {
+		if (msg_routed(msg))
 			tipc_printf(buf, ":CSEQN(%u)", msg_transp_seqno(msg));
-		}
 	}
 
 	if (msg_user(msg) ==  LINK_CONFIG) {
-		u32* raw = (u32*)msg;
-		struct tipc_media_addr* orig = (struct tipc_media_addr*)&raw[5];
+		u32 *raw = (u32 *)msg;
+		struct tipc_media_addr *orig = (struct tipc_media_addr *)&raw[5];
 		tipc_printf(buf, ":REQL(%u):", msg_req_links(msg));
 		tipc_printf(buf, ":DDOM(%x):", msg_dest_domain(msg));
 		tipc_printf(buf, ":NETID(%u):", msg_bc_netid(msg));
@@ -407,12 +404,10 @@ void tipc_msg_dbg(struct print_buf *buf, struct tipc_msg *msg, const char *str)
 		tipc_printf(buf, "TO(%u):", msg_bcgap_to(msg));
 	}
 	tipc_printf(buf, "\n");
-	if ((usr == CHANGEOVER_PROTOCOL) && (msg_msgcnt(msg))) {
+	if ((usr == CHANGEOVER_PROTOCOL) && (msg_msgcnt(msg)))
 		tipc_msg_dbg(buf, msg_get_wrapped(msg), "      /");
-	}
-	if ((usr == MSG_FRAGMENTER) && (msg_type(msg) == FIRST_FRAGMENT)) {
+	if ((usr == MSG_FRAGMENTER) && (msg_type(msg) == FIRST_FRAGMENT))
 		tipc_msg_dbg(buf, msg_get_wrapped(msg), "      /");
-	}
 }
 
 #endif
diff --git a/net/tipc/msg.h b/net/tipc/msg.h
index 031aad18efc..92c4c4fd7b3 100644
--- a/net/tipc/msg.h
+++ b/net/tipc/msg.h
@@ -37,10 +37,51 @@
 #ifndef _TIPC_MSG_H
 #define _TIPC_MSG_H
 
-#include "core.h"
+#include "bearer.h"
 
 #define TIPC_VERSION              2
 
+/*
+ *		TIPC user data message header format, version 2:
+ *
+ *
+ *     1 0 9 8 7 6 5 4|3 2 1 0 9 8 7 6|5 4 3 2 1 0 9 8|7 6 5 4 3 2 1 0
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * w0:|vers | user  |hdr sz |n|d|s|-|          message size           |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * w1:|mstyp| error |rer cnt|lsc|opt p|      broadcast ack no         |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * w2:|        link level ack no      |   broadcast/link level seq no |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * w3:|                       previous node                           |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * w4:|                      originating port                         |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * w5:|                      destination port                         |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * w6:|                      originating node                         |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * w7:|                      destination node                         |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * w8:|            name type / transport sequence number              |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * w9:|              name instance/multicast lower bound              |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * wA:|                    multicast upper bound                      |
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *    /                                                               /
+ *    \                           options                             \
+ *    /                                                               /
+ *    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ */
+
+#define TIPC_CONN_MSG		0
+#define TIPC_MCAST_MSG		1
+#define TIPC_NAMED_MSG		2
+#define TIPC_DIRECT_MSG		3
+
+
 #define SHORT_H_SIZE              24	/* Connected, in-cluster messages */
 #define DIR_MSG_H_SIZE            32	/* Directly addressed messages */
 #define LONG_H_SIZE               40	/* Named messages */
@@ -52,20 +93,26 @@
 #define MAX_MSG_SIZE (MAX_H_SIZE + TIPC_MAX_USER_MSG_SIZE)
 
 
-/*
-		TIPC user data message header format, version 2
+struct tipc_msg {
+	__be32 hdr[15];
+};
 
-	- Fundamental definitions available to privileged TIPC users
-	  are located in tipc_msg.h.
-	- Remaining definitions available to TIPC internal users appear below.
-*/
 
+static inline u32 msg_word(struct tipc_msg *m, u32 pos)
+{
+	return ntohl(m->hdr[pos]);
+}
 
 static inline void msg_set_word(struct tipc_msg *m, u32 w, u32 val)
 {
 	m->hdr[w] = htonl(val);
 }
 
+static inline u32 msg_bits(struct tipc_msg *m, u32 w, u32 pos, u32 mask)
+{
+	return (msg_word(m, w) >> pos) & mask;
+}
+
 static inline void msg_set_bits(struct tipc_msg *m, u32 w,
 				u32 pos, u32 mask, u32 val)
 {
@@ -112,16 +159,36 @@ static inline void msg_set_user(struct tipc_msg *m, u32 n)
 	msg_set_bits(m, 0, 25, 0xf, n);
 }
 
+static inline u32 msg_importance(struct tipc_msg *m)
+{
+	return msg_bits(m, 0, 25, 0xf);
+}
+
 static inline void msg_set_importance(struct tipc_msg *m, u32 i)
 {
 	msg_set_user(m, i);
 }
 
-static inline void msg_set_hdr_sz(struct tipc_msg *m,u32 n)
+static inline u32 msg_hdr_sz(struct tipc_msg *m)
+{
+	return msg_bits(m, 0, 21, 0xf) << 2;
+}
+
+static inline void msg_set_hdr_sz(struct tipc_msg *m, u32 n)
 {
 	msg_set_bits(m, 0, 21, 0xf, n>>2);
 }
 
+static inline u32 msg_size(struct tipc_msg *m)
+{
+	return msg_bits(m, 0, 0, 0x1ffff);
+}
+
+static inline u32 msg_data_sz(struct tipc_msg *m)
+{
+	return msg_size(m) - msg_hdr_sz(m);
+}
+
 static inline int msg_non_seq(struct tipc_msg *m)
 {
 	return msg_bits(m, 0, 20, 1);
@@ -162,11 +229,36 @@ static inline void msg_set_size(struct tipc_msg *m, u32 sz)
  * Word 1
  */
 
+static inline u32 msg_type(struct tipc_msg *m)
+{
+	return msg_bits(m, 1, 29, 0x7);
+}
+
 static inline void msg_set_type(struct tipc_msg *m, u32 n)
 {
 	msg_set_bits(m, 1, 29, 0x7, n);
 }
 
+static inline u32 msg_named(struct tipc_msg *m)
+{
+	return msg_type(m) == TIPC_NAMED_MSG;
+}
+
+static inline u32 msg_mcast(struct tipc_msg *m)
+{
+	return msg_type(m) == TIPC_MCAST_MSG;
+}
+
+static inline u32 msg_connected(struct tipc_msg *m)
+{
+	return msg_type(m) == TIPC_CONN_MSG;
+}
+
+static inline u32 msg_errcode(struct tipc_msg *m)
+{
+	return msg_bits(m, 1, 25, 0xf);
+}
+
 static inline void msg_set_errcode(struct tipc_msg *m, u32 err)
 {
 	msg_set_bits(m, 1, 25, 0xf, err);
@@ -257,31 +349,68 @@ static inline void msg_set_destnode_cache(struct tipc_msg *m, u32 dnode)
  */
 
 
+static inline u32 msg_prevnode(struct tipc_msg *m)
+{
+	return msg_word(m, 3);
+}
+
 static inline void msg_set_prevnode(struct tipc_msg *m, u32 a)
 {
 	msg_set_word(m, 3, a);
 }
 
+static inline u32 msg_origport(struct tipc_msg *m)
+{
+	return msg_word(m, 4);
+}
+
 static inline void msg_set_origport(struct tipc_msg *m, u32 p)
 {
 	msg_set_word(m, 4, p);
 }
 
+static inline u32 msg_destport(struct tipc_msg *m)
+{
+	return msg_word(m, 5);
+}
+
 static inline void msg_set_destport(struct tipc_msg *m, u32 p)
 {
 	msg_set_word(m, 5, p);
 }
 
+static inline u32 msg_mc_netid(struct tipc_msg *m)
+{
+	return msg_word(m, 5);
+}
+
 static inline void msg_set_mc_netid(struct tipc_msg *m, u32 p)
 {
 	msg_set_word(m, 5, p);
 }
 
+static inline int msg_short(struct tipc_msg *m)
+{
+	return msg_hdr_sz(m) == 24;
+}
+
+static inline u32 msg_orignode(struct tipc_msg *m)
+{
+	if (likely(msg_short(m)))
+		return msg_prevnode(m);
+	return msg_word(m, 6);
+}
+
 static inline void msg_set_orignode(struct tipc_msg *m, u32 a)
 {
 	msg_set_word(m, 6, a);
 }
 
+static inline u32 msg_destnode(struct tipc_msg *m)
+{
+	return msg_word(m, 7);
+}
+
 static inline void msg_set_destnode(struct tipc_msg *m, u32 a)
 {
 	msg_set_word(m, 7, a);
@@ -296,7 +425,12 @@ static inline u32 msg_routed(struct tipc_msg *m)
 {
 	if (likely(msg_short(m)))
 		return 0;
-	return(msg_destnode(m) ^ msg_orignode(m)) >> 11;
+	return (msg_destnode(m) ^ msg_orignode(m)) >> 11;
+}
+
+static inline u32 msg_nametype(struct tipc_msg *m)
+{
+	return msg_word(m, 8);
 }
 
 static inline void msg_set_nametype(struct tipc_msg *m, u32 n)
@@ -324,6 +458,16 @@ static inline void msg_set_transp_seqno(struct tipc_msg *m, u32 n)
 	msg_set_word(m, 8, n);
 }
 
+static inline u32 msg_nameinst(struct tipc_msg *m)
+{
+	return msg_word(m, 9);
+}
+
+static inline u32 msg_namelower(struct tipc_msg *m)
+{
+	return msg_nameinst(m);
+}
+
 static inline void msg_set_namelower(struct tipc_msg *m, u32 n)
 {
 	msg_set_word(m, 9, n);
@@ -334,11 +478,21 @@ static inline void msg_set_nameinst(struct tipc_msg *m, u32 n)
 	msg_set_namelower(m, n);
 }
 
+static inline u32 msg_nameupper(struct tipc_msg *m)
+{
+	return msg_word(m, 10);
+}
+
 static inline void msg_set_nameupper(struct tipc_msg *m, u32 n)
 {
 	msg_set_word(m, 10, n);
 }
 
+static inline unchar *msg_data(struct tipc_msg *m)
+{
+	return ((unchar *)m) + msg_hdr_sz(m);
+}
+
 static inline struct tipc_msg *msg_get_wrapped(struct tipc_msg *m)
 {
 	return (struct tipc_msg *)msg_data(m);
@@ -386,7 +540,7 @@ static inline struct tipc_msg *msg_get_wrapped(struct tipc_msg *m)
 #define  MSG_BUNDLER          6
 #define  LINK_PROTOCOL        7
 #define  CONN_MANAGER         8
-#define  ROUTE_DISTRIBUTOR    9
+#define  ROUTE_DISTRIBUTOR    9		/* obsoleted */
 #define  CHANGEOVER_PROTOCOL  10
 #define  NAME_DISTRIBUTOR     11
 #define  MSG_FRAGMENTER       12
@@ -665,11 +819,6 @@ static inline void msg_set_remote_node(struct tipc_msg *m, u32 a)
 	msg_set_word(m, msg_hdr_sz(m)/4, a);
 }
 
-static inline void msg_set_dataoctet(struct tipc_msg *m, u32 pos)
-{
-	msg_data(m)[pos + 4] = 1;
-}
-
 /*
  * Segmentation message types
  */
@@ -696,7 +845,7 @@ static inline void msg_set_dataoctet(struct tipc_msg *m, u32 pos)
  * Routing table message types
  */
 #define EXT_ROUTING_TABLE    0
-#define LOCAL_ROUTING_TABLE  1
+#define LOCAL_ROUTING_TABLE  1		/* obsoleted */
 #define SLAVE_ROUTING_TABLE  2
 #define ROUTE_ADDITION       3
 #define ROUTE_REMOVAL        4
@@ -714,7 +863,7 @@ void tipc_msg_init(struct tipc_msg *m, u32 user, u32 type,
 int tipc_msg_calc_data_size(struct iovec const *msg_sect, u32 num_sect);
 int tipc_msg_build(struct tipc_msg *hdr,
 			    struct iovec const *msg_sect, u32 num_sect,
-			    int max_size, int usrmem, struct sk_buff** buf);
+			    int max_size, int usrmem, struct sk_buff **buf);
 
 static inline void msg_set_media_addr(struct tipc_msg *m, struct tipc_media_addr *a)
 {
@@ -723,7 +872,7 @@ static inline void msg_set_media_addr(struct tipc_msg *m, struct tipc_media_addr
 
 static inline void msg_get_media_addr(struct tipc_msg *m, struct tipc_media_addr *a)
 {
-	memcpy(a, &((int*)m)[5], sizeof(*a));
+	memcpy(a, &((int *)m)[5], sizeof(*a));
 }
 
 #endif
diff --git a/net/tipc/name_distr.c b/net/tipc/name_distr.c
index 7b907171f87..483c226c958 100644
--- a/net/tipc/name_distr.c
+++ b/net/tipc/name_distr.c
@@ -35,10 +35,7 @@
  */
 
 #include "core.h"
-#include "cluster.h"
-#include "dbg.h"
 #include "link.h"
-#include "msg.h"
 #include "name_distr.h"
 
 #define ITEM_SIZE sizeof(struct distr_item)
@@ -76,7 +73,7 @@ struct distr_item {
  */
 
 static LIST_HEAD(publ_root);
-static u32 publ_cnt = 0;
+static u32 publ_cnt;
 
 /**
  * publ_to_item - add publication info to a publication message
@@ -89,7 +86,6 @@ static void publ_to_item(struct distr_item *i, struct publication *p)
 	i->upper = htonl(p->upper);
 	i->ref = htonl(p->ref);
 	i->key = htonl(p->key);
-	dbg("publ_to_item: %u, %u, %u\n", p->type, p->lower, p->upper);
 }
 
 /**
@@ -109,6 +105,26 @@ static struct sk_buff *named_prepare_buf(u32 type, u32 size, u32 dest)
 	return buf;
 }
 
+static void named_cluster_distribute(struct sk_buff *buf)
+{
+	struct sk_buff *buf_copy;
+	struct tipc_node *n_ptr;
+	u32 n_num;
+
+	for (n_num = 1; n_num <= tipc_net.highest_node; n_num++) {
+		n_ptr = tipc_net.nodes[n_num];
+		if (n_ptr && tipc_node_has_active_links(n_ptr)) {
+			buf_copy = skb_copy(buf, GFP_ATOMIC);
+			if (!buf_copy)
+				break;
+			msg_set_destnode(buf_msg(buf_copy), n_ptr->addr);
+			tipc_link_send(buf_copy, n_ptr->addr, n_ptr->addr);
+		}
+	}
+
+	buf_discard(buf);
+}
+
 /**
  * tipc_named_publish - tell other nodes about a new publication by this node
  */
@@ -129,8 +145,7 @@ void tipc_named_publish(struct publication *publ)
 
 	item = (struct distr_item *)msg_data(buf_msg(buf));
 	publ_to_item(item, publ);
-	dbg("tipc_named_withdraw: broadcasting publish msg\n");
-	tipc_cltr_broadcast(buf);
+	named_cluster_distribute(buf);
 }
 
 /**
@@ -153,8 +168,7 @@ void tipc_named_withdraw(struct publication *publ)
 
 	item = (struct distr_item *)msg_data(buf_msg(buf));
 	publ_to_item(item, publ);
-	dbg("tipc_named_withdraw: broadcasting withdraw msg\n");
-	tipc_cltr_broadcast(buf);
+	named_cluster_distribute(buf);
 }
 
 /**
@@ -191,9 +205,6 @@ void tipc_named_node_up(unsigned long node)
 		left -= ITEM_SIZE;
 		if (!left) {
 			msg_set_link_selector(buf_msg(buf), node);
-			dbg("tipc_named_node_up: sending publish msg to "
-			    "<%u.%u.%u>\n", tipc_zone(node),
-			    tipc_cluster(node), tipc_node(node));
 			tipc_link_send(buf, node, node);
 			buf = NULL;
 		}
@@ -218,8 +229,6 @@ static void node_is_down(struct publication *publ)
 	struct publication *p;
 
 	write_lock_bh(&tipc_nametbl_lock);
-	dbg("node_is_down: withdrawing %u, %u, %u\n",
-	    publ->type, publ->lower, publ->upper);
 	publ->key += 1222345;
 	p = tipc_nametbl_remove_publ(publ->type, publ->lower,
 				     publ->node, publ->ref, publ->key);
@@ -231,9 +240,7 @@ static void node_is_down(struct publication *publ)
 		    publ->type, publ->lower, publ->node, publ->ref, publ->key);
 	}
 
-	if (p) {
-		kfree(p);
-	}
+	kfree(p);
 }
 
 /**
@@ -250,9 +257,6 @@ void tipc_named_recv(struct sk_buff *buf)
 	write_lock_bh(&tipc_nametbl_lock);
 	while (count--) {
 		if (msg_type(msg) == PUBLICATION) {
-			dbg("tipc_named_recv: got publication for %u, %u, %u\n",
-			    ntohl(item->type), ntohl(item->lower),
-			    ntohl(item->upper));
 			publ = tipc_nametbl_insert_publ(ntohl(item->type),
 							ntohl(item->lower),
 							ntohl(item->upper),
@@ -267,9 +271,6 @@ void tipc_named_recv(struct sk_buff *buf)
 						       (net_ev_handler)node_is_down);
 			}
 		} else if (msg_type(msg) == WITHDRAWAL) {
-			dbg("tipc_named_recv: got withdrawl for %u, %u, %u\n",
-			    ntohl(item->type), ntohl(item->lower),
-			    ntohl(item->upper));
 			publ = tipc_nametbl_remove_publ(ntohl(item->type),
 							ntohl(item->lower),
 							msg_orignode(msg),
diff --git a/net/tipc/name_table.c b/net/tipc/name_table.c
index 3a8de4334da..205ed4a4e18 100644
--- a/net/tipc/name_table.c
+++ b/net/tipc/name_table.c
@@ -36,15 +36,10 @@
 
 #include "core.h"
 #include "config.h"
-#include "dbg.h"
 #include "name_table.h"
 #include "name_distr.h"
-#include "addr.h"
-#include "node_subscr.h"
 #include "subscr.h"
 #include "port.h"
-#include "cluster.h"
-#include "bcast.h"
 
 static int tipc_nametbl_size = 1024;		/* must be a power of 2 */
 
@@ -109,7 +104,7 @@ struct name_table {
 	u32 local_publ_count;
 };
 
-static struct name_table table = { NULL } ;
+static struct name_table table;
 static atomic_t rsv_publ_ok = ATOMIC_INIT(0);
 DEFINE_RWLOCK(tipc_nametbl_lock);
 
@@ -177,8 +172,6 @@ static struct name_seq *tipc_nameseq_create(u32 type, struct hlist_head *seq_hea
 	spin_lock_init(&nseq->lock);
 	nseq->type = type;
 	nseq->sseqs = sseq;
-	dbg("tipc_nameseq_create(): nseq = %p, type %u, ssseqs %p, ff: %u\n",
-	    nseq, type, nseq->sseqs, nseq->first_free);
 	nseq->alloc = 1;
 	INIT_HLIST_NODE(&nseq->ns_list);
 	INIT_LIST_HEAD(&nseq->subscriptions);
@@ -256,8 +249,6 @@ static struct publication *tipc_nameseq_insert_publ(struct name_seq *nseq,
 	int created_subseq = 0;
 
 	sseq = nameseq_find_subseq(nseq, lower);
-	dbg("nameseq_ins: for seq %p, {%u,%u}, found sseq %p\n",
-	    nseq, type, lower, sseq);
 	if (sseq) {
 
 		/* Lower end overlaps existing entry => need an exact match */
@@ -294,38 +285,30 @@ static struct publication *tipc_nameseq_insert_publ(struct name_seq *nseq,
 				     type, lower, upper);
 				return NULL;
 			}
-			dbg("Allocated %u more sseqs\n", nseq->alloc);
 			memcpy(sseqs, nseq->sseqs,
 			       nseq->alloc * sizeof(struct sub_seq));
 			kfree(nseq->sseqs);
 			nseq->sseqs = sseqs;
 			nseq->alloc *= 2;
 		}
-		dbg("Have %u sseqs for type %u\n", nseq->alloc, type);
 
 		/* Insert new sub-sequence */
 
-		dbg("ins in pos %u, ff = %u\n", inspos, nseq->first_free);
 		sseq = &nseq->sseqs[inspos];
 		freesseq = &nseq->sseqs[nseq->first_free];
-		memmove(sseq + 1, sseq, (freesseq - sseq) * sizeof (*sseq));
-		memset(sseq, 0, sizeof (*sseq));
+		memmove(sseq + 1, sseq, (freesseq - sseq) * sizeof(*sseq));
+		memset(sseq, 0, sizeof(*sseq));
 		nseq->first_free++;
 		sseq->lower = lower;
 		sseq->upper = upper;
 		created_subseq = 1;
 	}
-	dbg("inserting {%u,%u,%u} from <0x%x:%u> into sseq %p(%u,%u) of seq %p\n",
-	    type, lower, upper, node, port, sseq,
-	    sseq->lower, sseq->upper, nseq);
 
 	/* Insert a publication: */
 
 	publ = publ_create(type, lower, upper, scope, node, port, key);
 	if (!publ)
 		return NULL;
-	dbg("inserting publ %p, node=0x%x publ->node=0x%x, subscr->node=%p\n",
-	    publ, node, publ->node, publ->subscr.node);
 
 	sseq->zone_list_size++;
 	if (!sseq->zone_list)
@@ -360,7 +343,6 @@ static struct publication *tipc_nameseq_insert_publ(struct name_seq *nseq,
 	 * Any subscriptions waiting for notification?
 	 */
 	list_for_each_entry_safe(s, st, &nseq->subscriptions, nameseq_list) {
-		dbg("calling report_overlap()\n");
 		tipc_subscr_report_overlap(s,
 					   publ->lower,
 					   publ->upper,
@@ -398,9 +380,6 @@ static struct publication *tipc_nameseq_remove_publ(struct name_seq *nseq, u32 i
 	if (!sseq)
 		return NULL;
 
-	dbg("tipc_nameseq_remove_publ: seq: %p, sseq %p, {%u,%u}, key %u\n",
-	    nseq, sseq, nseq->type, inst, key);
-
 	/* Remove publication from zone scope list */
 
 	prev = sseq->zone_list;
@@ -492,7 +471,7 @@ end_node:
 
 	if (!sseq->zone_list) {
 		free = &nseq->sseqs[nseq->first_free--];
-		memmove(sseq, sseq + 1, (free - (sseq + 1)) * sizeof (*sseq));
+		memmove(sseq, sseq + 1, (free - (sseq + 1)) * sizeof(*sseq));
 		removed_subseq = 1;
 	}
 
@@ -528,7 +507,7 @@ static void tipc_nameseq_subscribe(struct name_seq *nseq, struct subscription *s
 
 	while (sseq != &nseq->sseqs[nseq->first_free]) {
 		struct publication *zl = sseq->zone_list;
-		if (zl && tipc_subscr_overlap(s,sseq->lower,sseq->upper)) {
+		if (zl && tipc_subscr_overlap(s, sseq->lower, sseq->upper)) {
 			struct publication *crs = zl;
 			int must_report = 1;
 
@@ -554,15 +533,10 @@ static struct name_seq *nametbl_find_seq(u32 type)
 	struct hlist_node *seq_node;
 	struct name_seq *ns;
 
-	dbg("find_seq %u,(%u,0x%x) table = %p, hash[type] = %u\n",
-	    type, htonl(type), type, table.types, hash(type));
-
 	seq_head = &table.types[hash(type)];
 	hlist_for_each_entry(ns, seq_node, seq_head, ns_list) {
-		if (ns->type == type) {
-			dbg("found %p\n", ns);
+		if (ns->type == type)
 			return ns;
-		}
 	}
 
 	return NULL;
@@ -573,18 +547,14 @@ struct publication *tipc_nametbl_insert_publ(u32 type, u32 lower, u32 upper,
 {
 	struct name_seq *seq = nametbl_find_seq(type);
 
-	dbg("tipc_nametbl_insert_publ: {%u,%u,%u} found %p\n", type, lower, upper, seq);
 	if (lower > upper) {
 		warn("Failed to publish illegal {%u,%u,%u}\n",
 		     type, lower, upper);
 		return NULL;
 	}
 
-	dbg("Publishing {%u,%u,%u} from 0x%x\n", type, lower, upper, node);
-	if (!seq) {
+	if (!seq)
 		seq = tipc_nameseq_create(type, &table.types[hash(type)]);
-		dbg("tipc_nametbl_insert_publ: created %p\n", seq);
-	}
 	if (!seq)
 		return NULL;
 
@@ -601,7 +571,6 @@ struct publication *tipc_nametbl_remove_publ(u32 type, u32 lower,
 	if (!seq)
 		return NULL;
 
-	dbg("Withdrawing {%u,%u} from 0x%x\n", type, lower, node);
 	publ = tipc_nameseq_remove_publ(seq, lower, node, ref, key);
 
 	if (!seq->first_free && list_empty(&seq->subscriptions)) {
@@ -782,9 +751,8 @@ struct publication *tipc_nametbl_publish(u32 type, u32 lower, u32 upper,
 	table.local_publ_count++;
 	publ = tipc_nametbl_insert_publ(type, lower, upper, scope,
 				   tipc_own_addr, port_ref, key);
-	if (publ && (scope != TIPC_NODE_SCOPE)) {
+	if (publ && (scope != TIPC_NODE_SCOPE))
 		tipc_named_publish(publ);
-	}
 	write_unlock_bh(&tipc_nametbl_lock);
 	return publ;
 }
@@ -797,7 +765,6 @@ int tipc_nametbl_withdraw(u32 type, u32 lower, u32 ref, u32 key)
 {
 	struct publication *publ;
 
-	dbg("tipc_nametbl_withdraw: {%u,%u}, key=%u\n", type, lower, key);
 	write_lock_bh(&tipc_nametbl_lock);
 	publ = tipc_nametbl_remove_publ(type, lower, tipc_own_addr, ref, key);
 	if (likely(publ)) {
@@ -827,13 +794,10 @@ void tipc_nametbl_subscribe(struct subscription *s)
 
 	write_lock_bh(&tipc_nametbl_lock);
 	seq = nametbl_find_seq(type);
-	if (!seq) {
+	if (!seq)
 		seq = tipc_nameseq_create(type, &table.types[hash(type)]);
-	}
-	if (seq){
+	if (seq) {
 		spin_lock_bh(&seq->lock);
-		dbg("tipc_nametbl_subscribe:found %p for {%u,%u,%u}\n",
-		    seq, type, s->seq.lower, s->seq.upper);
 		tipc_nameseq_subscribe(seq, s);
 		spin_unlock_bh(&seq->lock);
 	} else {
@@ -853,7 +817,7 @@ void tipc_nametbl_unsubscribe(struct subscription *s)
 
 	write_lock_bh(&tipc_nametbl_lock);
 	seq = nametbl_find_seq(s->seq.type);
-	if (seq != NULL){
+	if (seq != NULL) {
 		spin_lock_bh(&seq->lock);
 		list_del_init(&s->nameseq_list);
 		spin_unlock_bh(&seq->lock);
@@ -886,7 +850,7 @@ static void subseq_list(struct sub_seq *sseq, struct print_buf *buf, u32 depth,
 	}
 
 	do {
-		sprintf (portIdStr, "<%u.%u.%u:%u>",
+		sprintf(portIdStr, "<%u.%u.%u:%u>",
 			 tipc_zone(publ->node), tipc_cluster(publ->node),
 			 tipc_node(publ->node), publ->ref);
 		tipc_printf(buf, "%-26s ", portIdStr);
diff --git a/net/tipc/name_table.h b/net/tipc/name_table.h
index 139882d4ed0..d228bd68265 100644
--- a/net/tipc/name_table.h
+++ b/net/tipc/name_table.h
@@ -46,7 +46,7 @@ struct port_list;
  * TIPC name types reserved for internal TIPC use (both current and planned)
  */
 
-#define TIPC_ZM_SRV 3  		/* zone master service name type */
+#define TIPC_ZM_SRV 3		/* zone master service name type */
 
 
 /**
diff --git a/net/tipc/net.c b/net/tipc/net.c
index 1a621cfd660..9bacfd00b91 100644
--- a/net/tipc/net.c
+++ b/net/tipc/net.c
@@ -35,18 +35,10 @@
  */
 
 #include "core.h"
-#include "bearer.h"
 #include "net.h"
-#include "zone.h"
-#include "addr.h"
-#include "name_table.h"
 #include "name_distr.h"
 #include "subscr.h"
-#include "link.h"
-#include "msg.h"
 #include "port.h"
-#include "bcast.h"
-#include "discover.h"
 #include "config.h"
 
 /*
@@ -116,46 +108,25 @@
 */
 
 DEFINE_RWLOCK(tipc_net_lock);
-static struct _zone *tipc_zones[256] = { NULL, };
-struct network tipc_net = { tipc_zones };
+struct network tipc_net;
 
-struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref)
+static int net_start(void)
 {
-	return tipc_zone_select_remote_node(tipc_net.zones[tipc_zone(addr)], addr, ref);
-}
-
-u32 tipc_net_select_router(u32 addr, u32 ref)
-{
-	return tipc_zone_select_router(tipc_net.zones[tipc_zone(addr)], addr, ref);
-}
-
-void tipc_net_remove_as_router(u32 router)
-{
-	u32 z_num;
-
-	for (z_num = 1; z_num <= tipc_max_zones; z_num++) {
-		if (!tipc_net.zones[z_num])
-			continue;
-		tipc_zone_remove_as_router(tipc_net.zones[z_num], router);
-	}
-}
-
-void tipc_net_send_external_routes(u32 dest)
-{
-	u32 z_num;
+	tipc_net.nodes = kcalloc(tipc_max_nodes + 1,
+				 sizeof(*tipc_net.nodes), GFP_ATOMIC);
+	tipc_net.highest_node = 0;
 
-	for (z_num = 1; z_num <= tipc_max_zones; z_num++) {
-		if (tipc_net.zones[z_num])
-			tipc_zone_send_external_routes(tipc_net.zones[z_num], dest);
-	}
+	return tipc_net.nodes ? 0 : -ENOMEM;
 }
 
 static void net_stop(void)
 {
-	u32 z_num;
+	u32 n_num;
 
-	for (z_num = 1; z_num <= tipc_max_zones; z_num++)
-		tipc_zone_delete(tipc_net.zones[z_num]);
+	for (n_num = 1; n_num <= tipc_net.highest_node; n_num++)
+		tipc_node_delete(tipc_net.nodes[n_num]);
+	kfree(tipc_net.nodes);
+	tipc_net.nodes = NULL;
 }
 
 static void net_route_named_msg(struct sk_buff *buf)
@@ -165,22 +136,18 @@ static void net_route_named_msg(struct sk_buff *buf)
 	u32 dport;
 
 	if (!msg_named(msg)) {
-		msg_dbg(msg, "tipc_net->drop_nam:");
 		buf_discard(buf);
 		return;
 	}
 
 	dnode = addr_domain(msg_lookup_scope(msg));
 	dport = tipc_nametbl_translate(msg_nametype(msg), msg_nameinst(msg), &dnode);
-	dbg("tipc_net->lookup<%u,%u>-><%u,%x>\n",
-	    msg_nametype(msg), msg_nameinst(msg), dport, dnode);
 	if (dport) {
 		msg_set_destnode(msg, dnode);
 		msg_set_destport(msg, dport);
 		tipc_net_route_msg(buf);
 		return;
 	}
-	msg_dbg(msg, "tipc_net->rej:NO NAME: ");
 	tipc_reject_msg(buf, TIPC_ERR_NO_NAME);
 }
 
@@ -196,18 +163,14 @@ void tipc_net_route_msg(struct sk_buff *buf)
 	msg_incr_reroute_cnt(msg);
 	if (msg_reroute_cnt(msg) > 6) {
 		if (msg_errcode(msg)) {
-			msg_dbg(msg, "NET>DISC>:");
 			buf_discard(buf);
 		} else {
-			msg_dbg(msg, "NET>REJ>:");
 			tipc_reject_msg(buf, msg_destport(msg) ?
 					TIPC_ERR_NO_PORT : TIPC_ERR_NO_NAME);
 		}
 		return;
 	}
 
-	msg_dbg(msg, "tipc_net->rout: ");
-
 	/* Handle message for this node */
 	dnode = msg_short(msg) ? tipc_own_addr : msg_destnode(msg);
 	if (tipc_in_scope(dnode, tipc_own_addr)) {
@@ -221,9 +184,6 @@ void tipc_net_route_msg(struct sk_buff *buf)
 			return;
 		}
 		switch (msg_user(msg)) {
-		case ROUTE_DISTRIBUTOR:
-			tipc_cltr_recv_routing_table(buf);
-			break;
 		case NAME_DISTRIBUTOR:
 			tipc_named_recv(buf);
 			break;
@@ -231,14 +191,12 @@ void tipc_net_route_msg(struct sk_buff *buf)
 			tipc_port_recv_proto_msg(buf);
 			break;
 		default:
-			msg_dbg(msg,"DROP/NET/<REC<");
 			buf_discard(buf);
 		}
 		return;
 	}
 
 	/* Handle message for another node */
-	msg_dbg(msg, "NET>SEND>: ");
 	skb_trim(buf, msg_size(msg));
 	tipc_link_send(buf, dnode, msg_link_selector(msg));
 }
@@ -259,10 +217,12 @@ int tipc_net_start(u32 addr)
 	tipc_named_reinit();
 	tipc_port_reinit();
 
-	if ((res = tipc_cltr_init()) ||
-	    (res = tipc_bclink_init())) {
+	res = net_start();
+	if (res)
+		return res;
+	res = tipc_bclink_init();
+	if (res)
 		return res;
-	}
 
 	tipc_k_signal((Handler)tipc_subscr_start, 0);
 	tipc_k_signal((Handler)tipc_cfg_init, 0);
diff --git a/net/tipc/net.h b/net/tipc/net.h
index de2b9ad8f64..4ae59ad0489 100644
--- a/net/tipc/net.h
+++ b/net/tipc/net.h
@@ -37,26 +37,26 @@
 #ifndef _TIPC_NET_H
 #define _TIPC_NET_H
 
-struct _zone;
+struct tipc_node;
 
 /**
  * struct network - TIPC network structure
- * @zones: array of pointers to all zones within network
+ * @nodes: array of pointers to all nodes within cluster
+ * @highest_node: id of highest numbered node within cluster
+ * @links: number of (unicast) links to cluster
  */
 
 struct network {
-	struct _zone **zones;
+	struct tipc_node **nodes;
+	u32 highest_node;
+	u32 links;
 };
 
 
 extern struct network tipc_net;
 extern rwlock_t tipc_net_lock;
 
-void tipc_net_remove_as_router(u32 router);
-void tipc_net_send_external_routes(u32 dest);
 void tipc_net_route_msg(struct sk_buff *buf);
-struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref);
-u32 tipc_net_select_router(u32 addr, u32 ref);
 
 int tipc_net_start(u32 addr);
 void tipc_net_stop(void);
diff --git a/net/tipc/node.c b/net/tipc/node.c
index b4d87eb2dc5..3af53e327f4 100644
--- a/net/tipc/node.c
+++ b/net/tipc/node.c
@@ -37,25 +37,14 @@
 #include "core.h"
 #include "config.h"
 #include "node.h"
-#include "cluster.h"
-#include "net.h"
-#include "addr.h"
-#include "node_subscr.h"
-#include "link.h"
-#include "port.h"
-#include "bearer.h"
 #include "name_distr.h"
 
-void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str);
 static void node_lost_contact(struct tipc_node *n_ptr);
 static void node_established_contact(struct tipc_node *n_ptr);
 
-/* sorted list of nodes within cluster */
-static struct tipc_node *tipc_nodes = NULL;
-
 static DEFINE_SPINLOCK(node_create_lock);
 
-u32 tipc_own_tag = 0;
+u32 tipc_own_tag;
 
 /**
  * tipc_node_create - create neighboring node
@@ -69,65 +58,51 @@ u32 tipc_own_tag = 0;
 
 struct tipc_node *tipc_node_create(u32 addr)
 {
-	struct cluster *c_ptr;
 	struct tipc_node *n_ptr;
-	struct tipc_node **curr_node;
+	u32 n_num;
 
 	spin_lock_bh(&node_create_lock);
 
-	for (n_ptr = tipc_nodes; n_ptr; n_ptr = n_ptr->next) {
-		if (addr < n_ptr->addr)
-			break;
-		if (addr == n_ptr->addr) {
-			spin_unlock_bh(&node_create_lock);
-			return n_ptr;
-		}
+	n_ptr = tipc_node_find(addr);
+	if (n_ptr) {
+		spin_unlock_bh(&node_create_lock);
+		return n_ptr;
 	}
 
-	n_ptr = kzalloc(sizeof(*n_ptr),GFP_ATOMIC);
+	n_ptr = kzalloc(sizeof(*n_ptr), GFP_ATOMIC);
 	if (!n_ptr) {
 		spin_unlock_bh(&node_create_lock);
 		warn("Node creation failed, no memory\n");
 		return NULL;
 	}
 
-	c_ptr = tipc_cltr_find(addr);
-	if (!c_ptr) {
-		c_ptr = tipc_cltr_create(addr);
-	}
-	if (!c_ptr) {
-		spin_unlock_bh(&node_create_lock);
-		kfree(n_ptr);
-		return NULL;
-	}
-
 	n_ptr->addr = addr;
-		spin_lock_init(&n_ptr->lock);
+	spin_lock_init(&n_ptr->lock);
 	INIT_LIST_HEAD(&n_ptr->nsub);
-	n_ptr->owner = c_ptr;
-	tipc_cltr_attach_node(c_ptr, n_ptr);
-	n_ptr->last_router = -1;
-
-	/* Insert node into ordered list */
-	for (curr_node = &tipc_nodes; *curr_node;
-	     curr_node = &(*curr_node)->next) {
-		if (addr < (*curr_node)->addr) {
-			n_ptr->next = *curr_node;
-			break;
-		}
-	}
-	(*curr_node) = n_ptr;
+
+	n_num = tipc_node(addr);
+	tipc_net.nodes[n_num] = n_ptr;
+	if (n_num > tipc_net.highest_node)
+		tipc_net.highest_node = n_num;
+
 	spin_unlock_bh(&node_create_lock);
 	return n_ptr;
 }
 
 void tipc_node_delete(struct tipc_node *n_ptr)
 {
+	u32 n_num;
+
 	if (!n_ptr)
 		return;
 
-	dbg("node %x deleted\n", n_ptr->addr);
+	n_num = tipc_node(n_ptr->addr);
+	tipc_net.nodes[n_num] = NULL;
 	kfree(n_ptr);
+
+	while (!tipc_net.nodes[tipc_net.highest_node])
+		if (--tipc_net.highest_node == 0)
+			break;
 }
 
 
@@ -147,7 +122,6 @@ void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr)
 	     l_ptr->name, l_ptr->b_ptr->net_plane);
 
 	if (!active[0]) {
-		dbg(" link %x into %x/%x\n", l_ptr, &active[0], &active[1]);
 		active[0] = active[1] = l_ptr;
 		node_established_contact(n_ptr);
 		return;
@@ -236,14 +210,9 @@ int tipc_node_has_redundant_links(struct tipc_node *n_ptr)
 	return n_ptr->working_links > 1;
 }
 
-static int tipc_node_has_active_routes(struct tipc_node *n_ptr)
-{
-	return n_ptr && (n_ptr->last_router >= 0);
-}
-
 int tipc_node_is_up(struct tipc_node *n_ptr)
 {
-	return tipc_node_has_active_links(n_ptr) || tipc_node_has_active_routes(n_ptr);
+	return tipc_node_has_active_links(n_ptr);
 }
 
 struct tipc_node *tipc_node_attach_link(struct link *l_ptr)
@@ -264,7 +233,7 @@ struct tipc_node *tipc_node_attach_link(struct link *l_ptr)
 
 		if (!n_ptr->links[bearer_id]) {
 			n_ptr->links[bearer_id] = l_ptr;
-			tipc_net.zones[tipc_zone(l_ptr->addr)]->links++;
+			tipc_net.links++;
 			n_ptr->link_cnt++;
 			return n_ptr;
 		}
@@ -278,7 +247,7 @@ struct tipc_node *tipc_node_attach_link(struct link *l_ptr)
 void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr)
 {
 	n_ptr->links[l_ptr->b_ptr->identity] = NULL;
-	tipc_net.zones[tipc_zone(l_ptr->addr)]->links--;
+	tipc_net.links--;
 	n_ptr->link_cnt--;
 }
 
@@ -330,48 +299,16 @@ void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr)
 
 static void node_established_contact(struct tipc_node *n_ptr)
 {
-	struct cluster *c_ptr;
-
-	dbg("node_established_contact:-> %x\n", n_ptr->addr);
-	if (!tipc_node_has_active_routes(n_ptr) && in_own_cluster(n_ptr->addr)) {
-		tipc_k_signal((Handler)tipc_named_node_up, n_ptr->addr);
-	}
+	tipc_k_signal((Handler)tipc_named_node_up, n_ptr->addr);
 
 	/* Syncronize broadcast acks */
 	n_ptr->bclink.acked = tipc_bclink_get_last_sent();
 
-	if (is_slave(tipc_own_addr))
-		return;
-	if (!in_own_cluster(n_ptr->addr)) {
-		/* Usage case 1 (see above) */
-		c_ptr = tipc_cltr_find(tipc_own_addr);
-		if (!c_ptr)
-			c_ptr = tipc_cltr_create(tipc_own_addr);
-		if (c_ptr)
-			tipc_cltr_bcast_new_route(c_ptr, n_ptr->addr, 1,
-						  tipc_max_nodes);
-		return;
-	}
-
-	c_ptr = n_ptr->owner;
-	if (is_slave(n_ptr->addr)) {
-		/* Usage case 2 (see above) */
-		tipc_cltr_bcast_new_route(c_ptr, n_ptr->addr, 1, tipc_max_nodes);
-		tipc_cltr_send_local_routes(c_ptr, n_ptr->addr);
-		return;
-	}
-
 	if (n_ptr->bclink.supported) {
-		tipc_nmap_add(&tipc_cltr_bcast_nodes, n_ptr->addr);
+		tipc_nmap_add(&tipc_bcast_nmap, n_ptr->addr);
 		if (n_ptr->addr < tipc_own_addr)
 			tipc_own_tag++;
 	}
-
-	/* Case 3 (see above) */
-	tipc_net_send_external_routes(n_ptr->addr);
-	tipc_cltr_send_slave_routes(c_ptr, n_ptr->addr);
-	tipc_cltr_bcast_new_route(c_ptr, n_ptr->addr, LOWEST_SLAVE,
-				  tipc_highest_allowed_slave);
 }
 
 static void node_cleanup_finished(unsigned long node_addr)
@@ -390,7 +327,6 @@ static void node_cleanup_finished(unsigned long node_addr)
 
 static void node_lost_contact(struct tipc_node *n_ptr)
 {
-	struct cluster *c_ptr;
 	struct tipc_node_subscr *ns, *tns;
 	char addr_string[16];
 	u32 i;
@@ -398,7 +334,7 @@ static void node_lost_contact(struct tipc_node *n_ptr)
 	/* Clean up broadcast reception remains */
 	n_ptr->bclink.gap_after = n_ptr->bclink.gap_to = 0;
 	while (n_ptr->bclink.deferred_head) {
-		struct sk_buff* buf = n_ptr->bclink.deferred_head;
+		struct sk_buff *buf = n_ptr->bclink.deferred_head;
 		n_ptr->bclink.deferred_head = buf->next;
 		buf_discard(buf);
 	}
@@ -406,41 +342,14 @@ static void node_lost_contact(struct tipc_node *n_ptr)
 		buf_discard(n_ptr->bclink.defragm);
 		n_ptr->bclink.defragm = NULL;
 	}
-	if (in_own_cluster(n_ptr->addr) && n_ptr->bclink.supported) {
-		tipc_bclink_acknowledge(n_ptr, mod(n_ptr->bclink.acked + 10000));
-	}
 
-	/* Update routing tables */
-	if (is_slave(tipc_own_addr)) {
-		tipc_net_remove_as_router(n_ptr->addr);
-	} else {
-		if (!in_own_cluster(n_ptr->addr)) {
-			/* Case 4 (see above) */
-			c_ptr = tipc_cltr_find(tipc_own_addr);
-			tipc_cltr_bcast_lost_route(c_ptr, n_ptr->addr, 1,
-						   tipc_max_nodes);
-		} else {
-			/* Case 5 (see above) */
-			c_ptr = tipc_cltr_find(n_ptr->addr);
-			if (is_slave(n_ptr->addr)) {
-				tipc_cltr_bcast_lost_route(c_ptr, n_ptr->addr, 1,
-							   tipc_max_nodes);
-			} else {
-				if (n_ptr->bclink.supported) {
-					tipc_nmap_remove(&tipc_cltr_bcast_nodes,
-							 n_ptr->addr);
-					if (n_ptr->addr < tipc_own_addr)
-						tipc_own_tag--;
-				}
-				tipc_net_remove_as_router(n_ptr->addr);
-				tipc_cltr_bcast_lost_route(c_ptr, n_ptr->addr,
-							   LOWEST_SLAVE,
-							   tipc_highest_allowed_slave);
-			}
-		}
+	if (n_ptr->bclink.supported) {
+		tipc_bclink_acknowledge(n_ptr,
+					mod(n_ptr->bclink.acked + 10000));
+		tipc_nmap_remove(&tipc_bcast_nmap, n_ptr->addr);
+		if (n_ptr->addr < tipc_own_addr)
+			tipc_own_tag--;
 	}
-	if (tipc_node_has_active_routes(n_ptr))
-		return;
 
 	info("Lost contact with %s\n",
 	     tipc_addr_string_fill(addr_string, n_ptr->addr));
@@ -469,125 +378,6 @@ static void node_lost_contact(struct tipc_node *n_ptr)
 	tipc_k_signal((Handler)node_cleanup_finished, n_ptr->addr);
 }
 
-/**
- * tipc_node_select_next_hop - find the next-hop node for a message
- *
- * Called by when cluster local lookup has failed.
- */
-
-struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector)
-{
-	struct tipc_node *n_ptr;
-	u32 router_addr;
-
-	if (!tipc_addr_domain_valid(addr))
-		return NULL;
-
-	/* Look for direct link to destination processsor */
-	n_ptr = tipc_node_find(addr);
-	if (n_ptr && tipc_node_has_active_links(n_ptr))
-		return n_ptr;
-
-	/* Cluster local system nodes *must* have direct links */
-	if (!is_slave(addr) && in_own_cluster(addr))
-		return NULL;
-
-	/* Look for cluster local router with direct link to node */
-	router_addr = tipc_node_select_router(n_ptr, selector);
-	if (router_addr)
-		return tipc_node_select(router_addr, selector);
-
-	/* Slave nodes can only be accessed within own cluster via a
-	   known router with direct link -- if no router was found,give up */
-	if (is_slave(addr))
-		return NULL;
-
-	/* Inter zone/cluster -- find any direct link to remote cluster */
-	addr = tipc_addr(tipc_zone(addr), tipc_cluster(addr), 0);
-	n_ptr = tipc_net_select_remote_node(addr, selector);
-	if (n_ptr && tipc_node_has_active_links(n_ptr))
-		return n_ptr;
-
-	/* Last resort -- look for any router to anywhere in remote zone */
-	router_addr =  tipc_net_select_router(addr, selector);
-	if (router_addr)
-		return tipc_node_select(router_addr, selector);
-
-	return NULL;
-}
-
-/**
- * tipc_node_select_router - select router to reach specified node
- *
- * Uses a deterministic and fair algorithm for selecting router node.
- */
-
-u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref)
-{
-	u32 ulim;
-	u32 mask;
-	u32 start;
-	u32 r;
-
-	if (!n_ptr)
-		return 0;
-
-	if (n_ptr->last_router < 0)
-		return 0;
-	ulim = ((n_ptr->last_router + 1) * 32) - 1;
-
-	/* Start entry must be random */
-	mask = tipc_max_nodes;
-	while (mask > ulim)
-		mask >>= 1;
-	start = ref & mask;
-	r = start;
-
-	/* Lookup upwards with wrap-around */
-	do {
-		if (((n_ptr->routers[r / 32]) >> (r % 32)) & 1)
-			break;
-	} while (++r <= ulim);
-	if (r > ulim) {
-		r = 1;
-		do {
-			if (((n_ptr->routers[r / 32]) >> (r % 32)) & 1)
-				break;
-		} while (++r < start);
-		assert(r != start);
-	}
-	assert(r && (r <= ulim));
-	return tipc_addr(own_zone(), own_cluster(), r);
-}
-
-void tipc_node_add_router(struct tipc_node *n_ptr, u32 router)
-{
-	u32 r_num = tipc_node(router);
-
-	n_ptr->routers[r_num / 32] =
-		((1 << (r_num % 32)) | n_ptr->routers[r_num / 32]);
-	n_ptr->last_router = tipc_max_nodes / 32;
-	while ((--n_ptr->last_router >= 0) &&
-	       !n_ptr->routers[n_ptr->last_router]);
-}
-
-void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router)
-{
-	u32 r_num = tipc_node(router);
-
-	if (n_ptr->last_router < 0)
-		return;		/* No routes */
-
-	n_ptr->routers[r_num / 32] =
-		((~(1 << (r_num % 32))) & (n_ptr->routers[r_num / 32]));
-	n_ptr->last_router = tipc_max_nodes / 32;
-	while ((--n_ptr->last_router >= 0) &&
-	       !n_ptr->routers[n_ptr->last_router]);
-
-	if (!tipc_node_is_up(n_ptr))
-		node_lost_contact(n_ptr);
-}
-
 struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space)
 {
 	u32 domain;
@@ -595,6 +385,7 @@ struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space)
 	struct tipc_node *n_ptr;
 	struct tipc_node_info node_info;
 	u32 payload_size;
+	u32 n_num;
 
 	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_NET_ADDR))
 		return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
@@ -605,15 +396,15 @@ struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space)
 						   " (network address)");
 
 	read_lock_bh(&tipc_net_lock);
-	if (!tipc_nodes) {
+	if (!tipc_net.nodes) {
 		read_unlock_bh(&tipc_net_lock);
 		return tipc_cfg_reply_none();
 	}
 
-	/* For now, get space for all other nodes
-	   (will need to modify this when slave nodes are supported */
+	/* For now, get space for all other nodes */
 
-	payload_size = TLV_SPACE(sizeof(node_info)) * (tipc_max_nodes - 1);
+	payload_size = TLV_SPACE(sizeof(node_info)) *
+		(tipc_net.highest_node - 1);
 	if (payload_size > 32768u) {
 		read_unlock_bh(&tipc_net_lock);
 		return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
@@ -627,8 +418,9 @@ struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space)
 
 	/* Add TLVs for all nodes in scope */
 
-	for (n_ptr = tipc_nodes; n_ptr; n_ptr = n_ptr->next) {
-		if (!tipc_in_scope(domain, n_ptr->addr))
+	for (n_num = 1; n_num <= tipc_net.highest_node; n_num++) {
+		n_ptr = tipc_net.nodes[n_num];
+		if (!n_ptr || !tipc_in_scope(domain, n_ptr->addr))
 			continue;
 		node_info.addr = htonl(n_ptr->addr);
 		node_info.up = htonl(tipc_node_is_up(n_ptr));
@@ -647,6 +439,7 @@ struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space)
 	struct tipc_node *n_ptr;
 	struct tipc_link_info link_info;
 	u32 payload_size;
+	u32 n_num;
 
 	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_NET_ADDR))
 		return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
@@ -663,8 +456,7 @@ struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space)
 
 	/* Get space for all unicast links + multicast link */
 
-	payload_size = TLV_SPACE(sizeof(link_info)) *
-		(tipc_net.zones[tipc_zone(tipc_own_addr)]->links + 1);
+	payload_size = TLV_SPACE(sizeof(link_info)) * (tipc_net.links + 1);
 	if (payload_size > 32768u) {
 		read_unlock_bh(&tipc_net_lock);
 		return tipc_cfg_reply_error_string(TIPC_CFG_NOT_SUPPORTED
@@ -685,10 +477,11 @@ struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space)
 
 	/* Add TLVs for any other links in scope */
 
-	for (n_ptr = tipc_nodes; n_ptr; n_ptr = n_ptr->next) {
+	for (n_num = 1; n_num <= tipc_net.highest_node; n_num++) {
 		u32 i;
 
-		if (!tipc_in_scope(domain, n_ptr->addr))
+		n_ptr = tipc_net.nodes[n_num];
+		if (!n_ptr || !tipc_in_scope(domain, n_ptr->addr))
 			continue;
 		tipc_node_lock(n_ptr);
 		for (i = 0; i < MAX_BEARERS; i++) {
diff --git a/net/tipc/node.h b/net/tipc/node.h
index fff331b2d26..206a8efa410 100644
--- a/net/tipc/node.h
+++ b/net/tipc/node.h
@@ -39,14 +39,13 @@
 
 #include "node_subscr.h"
 #include "addr.h"
-#include "cluster.h"
+#include "net.h"
 #include "bearer.h"
 
 /**
  * struct tipc_node - TIPC node structure
  * @addr: network address of node
  * @lock: spinlock governing access to structure
- * @owner: pointer to cluster that node belongs to
  * @next: pointer to next node in sorted list of cluster's nodes
  * @nsub: list of "node down" subscriptions monitoring node
  * @active_links: pointers to active links to node
@@ -55,8 +54,6 @@
  * @cleanup_required: non-zero if cleaning up after a prior loss of contact
  * @link_cnt: number of links to node
  * @permit_changeover: non-zero if node has redundant links to this system
- * @routers: bitmap (used for multicluster communication)
- * @last_router: (used for multicluster communication)
  * @bclink: broadcast-related info
  *    @supported: non-zero if node supports TIPC b'cast capability
  *    @acked: sequence # of last outbound b'cast message acknowledged by node
@@ -72,7 +69,6 @@
 struct tipc_node {
 	u32 addr;
 	spinlock_t lock;
-	struct cluster *owner;
 	struct tipc_node *next;
 	struct list_head nsub;
 	struct link *active_links[2];
@@ -81,8 +77,6 @@ struct tipc_node {
 	int working_links;
 	int cleanup_required;
 	int permit_changeover;
-	u32 routers[512/32];
-	int last_router;
 	struct {
 		int supported;
 		u32 acked;
@@ -106,34 +100,17 @@ void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr);
 void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr);
 int tipc_node_has_active_links(struct tipc_node *n_ptr);
 int tipc_node_has_redundant_links(struct tipc_node *n_ptr);
-u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref);
-struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector);
 int tipc_node_is_up(struct tipc_node *n_ptr);
-void tipc_node_add_router(struct tipc_node *n_ptr, u32 router);
-void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router);
 struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space);
 struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space);
 
 static inline struct tipc_node *tipc_node_find(u32 addr)
 {
 	if (likely(in_own_cluster(addr)))
-		return tipc_local_nodes[tipc_node(addr)];
-	else if (tipc_addr_domain_valid(addr)) {
-		struct cluster *c_ptr = tipc_cltr_find(addr);
-
-		if (c_ptr)
-			return c_ptr->nodes[tipc_node(addr)];
-	}
+		return tipc_net.nodes[tipc_node(addr)];
 	return NULL;
 }
 
-static inline struct tipc_node *tipc_node_select(u32 addr, u32 selector)
-{
-	if (likely(in_own_cluster(addr)))
-		return tipc_local_nodes[tipc_node(addr)];
-	return tipc_node_select_next_hop(addr, selector);
-}
-
 static inline void tipc_node_lock(struct tipc_node *n_ptr)
 {
 	spin_lock_bh(&n_ptr->lock);
diff --git a/net/tipc/node_subscr.c b/net/tipc/node_subscr.c
index 19194d476a9..018a55332d9 100644
--- a/net/tipc/node_subscr.c
+++ b/net/tipc/node_subscr.c
@@ -35,10 +35,8 @@
  */
 
 #include "core.h"
-#include "dbg.h"
 #include "node_subscr.h"
 #include "node.h"
-#include "addr.h"
 
 /**
  * tipc_nodesub_subscribe - create "node down" subscription for specified node
diff --git a/net/tipc/port.c b/net/tipc/port.c
index 82092eaa153..067bab2a0b9 100644
--- a/net/tipc/port.c
+++ b/net/tipc/port.c
@@ -36,15 +36,8 @@
 
 #include "core.h"
 #include "config.h"
-#include "dbg.h"
 #include "port.h"
-#include "addr.h"
-#include "link.h"
-#include "node.h"
 #include "name_table.h"
-#include "user_reg.h"
-#include "msg.h"
-#include "bcast.h"
 
 /* Connection management: */
 #define PROBING_INTERVAL 3600000	/* [ms] => 1 h */
@@ -53,16 +46,16 @@
 
 #define MAX_REJECT_SIZE 1024
 
-static struct sk_buff *msg_queue_head = NULL;
-static struct sk_buff *msg_queue_tail = NULL;
+static struct sk_buff *msg_queue_head;
+static struct sk_buff *msg_queue_tail;
 
 DEFINE_SPINLOCK(tipc_port_list_lock);
 static DEFINE_SPINLOCK(queue_lock);
 
 static LIST_HEAD(ports);
 static void port_handle_node_down(unsigned long ref);
-static struct sk_buff* port_build_self_abort_msg(struct port *,u32 err);
-static struct sk_buff* port_build_peer_abort_msg(struct port *,u32 err);
+static struct sk_buff *port_build_self_abort_msg(struct port *, u32 err);
+static struct sk_buff *port_build_peer_abort_msg(struct port *, u32 err);
 static void port_timeout(unsigned long ref);
 
 
@@ -94,7 +87,7 @@ static void port_incr_out_seqno(struct port *p_ptr)
  * tipc_multicast - send a multicast message to local and remote destinations
  */
 
-int tipc_multicast(u32 ref, struct tipc_name_seq const *seq, u32 domain,
+int tipc_multicast(u32 ref, struct tipc_name_seq const *seq,
 		   u32 num_sect, struct iovec const *msg_sect)
 {
 	struct tipc_msg *hdr;
@@ -138,9 +131,8 @@ int tipc_multicast(u32 ref, struct tipc_name_seq const *seq, u32 domain,
 			}
 		}
 		res = tipc_bclink_send_msg(buf);
-		if ((res < 0) && (dports.count != 0)) {
+		if ((res < 0) && (dports.count != 0))
 			buf_discard(ibuf);
-		}
 	} else {
 		ibuf = buf;
 	}
@@ -162,7 +154,7 @@ int tipc_multicast(u32 ref, struct tipc_name_seq const *seq, u32 domain,
 
 void tipc_port_recv_mcast(struct sk_buff *buf, struct port_list *dp)
 {
-	struct tipc_msg* msg;
+	struct tipc_msg *msg;
 	struct port_list dports = {0, NULL, };
 	struct port_list *item = dp;
 	int cnt = 0;
@@ -195,13 +187,11 @@ void tipc_port_recv_mcast(struct sk_buff *buf, struct port_list *dp)
 
 			if (b == NULL) {
 				warn("Unable to deliver multicast message(s)\n");
-				msg_dbg(msg, "LOST:");
 				goto exit;
 			}
-			if ((index == 0) && (cnt != 0)) {
+			if ((index == 0) && (cnt != 0))
 				item = item->next;
-			}
-			msg_set_destport(buf_msg(b),item->ports[index]);
+			msg_set_destport(buf_msg(b), item->ports[index]);
 			tipc_port_recv_msg(b);
 		}
 	}
@@ -277,10 +267,7 @@ int tipc_deleteport(u32 ref)
 		buf = port_build_peer_abort_msg(p_ptr, TIPC_ERR_NO_PORT);
 		tipc_nodesub_unsubscribe(&p_ptr->subscription);
 	}
-	if (p_ptr->user_port) {
-		tipc_reg_remove_port(p_ptr->user_port);
-		kfree(p_ptr->user_port);
-	}
+	kfree(p_ptr->user_port);
 
 	spin_lock_bh(&tipc_port_list_lock);
 	list_del(&p_ptr->port_list);
@@ -288,7 +275,6 @@ int tipc_deleteport(u32 ref)
 	spin_unlock_bh(&tipc_port_list_lock);
 	k_term_timer(&p_ptr->timer);
 	kfree(p_ptr);
-	dbg("Deleted port %u\n", ref);
 	tipc_net_route_msg(buf);
 	return 0;
 }
@@ -374,7 +360,6 @@ static struct sk_buff *port_build_proto_msg(u32 destport, u32 destnode,
 		msg_set_orignode(msg, orignode);
 		msg_set_transp_seqno(msg, seqno);
 		msg_set_msgcnt(msg, ack);
-		msg_dbg(msg, "PORT>SEND>:");
 	}
 	return buf;
 }
@@ -392,7 +377,6 @@ int tipc_reject_msg(struct sk_buff *buf, u32 err)
 		data_sz = MAX_REJECT_SIZE;
 	if (msg_connected(msg) && (imp < TIPC_CRITICAL_IMPORTANCE))
 		imp++;
-	msg_dbg(msg, "port->rej: ");
 
 	/* discard rejected message if it shouldn't be returned to sender */
 	if (msg_errcode(msg) || msg_dest_droppable(msg)) {
@@ -498,7 +482,7 @@ static void port_timeout(unsigned long ref)
 static void port_handle_node_down(unsigned long ref)
 {
 	struct port *p_ptr = tipc_port_lock(ref);
-	struct sk_buff* buf = NULL;
+	struct sk_buff *buf = NULL;
 
 	if (!p_ptr)
 		return;
@@ -555,8 +539,6 @@ void tipc_port_recv_proto_msg(struct sk_buff *buf)
 	struct sk_buff *r_buf = NULL;
 	struct sk_buff *abort_buf = NULL;
 
-	msg_dbg(msg, "PORT<RECV<:");
-
 	if (!p_ptr) {
 		err = TIPC_ERR_NO_PORT;
 	} else if (p_ptr->publ.connected) {
@@ -636,8 +618,7 @@ static void port_print(struct port *p_ptr, struct print_buf *buf, int full_id)
 			tipc_printf(buf, " via {%u,%u}",
 				    p_ptr->publ.conn_type,
 				    p_ptr->publ.conn_instance);
-	}
-	else if (p_ptr->publ.published) {
+	} else if (p_ptr->publ.published) {
 		tipc_printf(buf, " bound to");
 		list_for_each_entry(publ, &p_ptr->publications, pport_list) {
 			if (publ->lower == publ->upper)
@@ -940,12 +921,10 @@ void tipc_acknowledge(u32 ref, u32 ack)
 }
 
 /*
- * tipc_createport(): user level call. Will add port to
- *                    registry if non-zero user_ref.
+ * tipc_createport(): user level call.
  */
 
-int tipc_createport(u32 user_ref,
-		    void *usr_handle,
+int tipc_createport(void *usr_handle,
 		    unsigned int importance,
 		    tipc_msg_err_event error_cb,
 		    tipc_named_msg_err_event named_error_cb,
@@ -972,7 +951,6 @@ int tipc_createport(u32 user_ref,
 	}
 
 	p_ptr->user_port = up_ptr;
-	up_ptr->user_ref = user_ref;
 	up_ptr->usr_handle = usr_handle;
 	up_ptr->ref = p_ptr->publ.ref;
 	up_ptr->err_cb = error_cb;
@@ -982,20 +960,11 @@ int tipc_createport(u32 user_ref,
 	up_ptr->named_msg_cb = named_msg_cb;
 	up_ptr->conn_msg_cb = conn_msg_cb;
 	up_ptr->continue_event_cb = continue_event_cb;
-	INIT_LIST_HEAD(&up_ptr->uport_list);
-	tipc_reg_add_port(up_ptr);
 	*portref = p_ptr->publ.ref;
 	tipc_port_unlock(p_ptr);
 	return 0;
 }
 
-int tipc_ownidentity(u32 ref, struct tipc_portid *id)
-{
-	id->ref = ref;
-	id->node = tipc_own_addr;
-	return 0;
-}
-
 int tipc_portimportance(u32 ref, unsigned int *importance)
 {
 	struct port *p_ptr;
@@ -1035,9 +1004,6 @@ int tipc_publish(u32 ref, unsigned int scope, struct tipc_name_seq const *seq)
 	if (!p_ptr)
 		return -EINVAL;
 
-	dbg("tipc_publ %u, p_ptr = %x, conn = %x, scope = %x, "
-	    "lower = %u, upper = %u\n",
-	    ref, p_ptr, p_ptr->publ.connected, scope, seq->lower, seq->upper);
 	if (p_ptr->publ.connected)
 		goto exit;
 	if (seq->lower > seq->upper)
@@ -1123,17 +1089,14 @@ int tipc_connect2port(u32 ref, struct tipc_portid const *peer)
 	msg_set_origport(msg, p_ptr->publ.ref);
 	msg_set_transp_seqno(msg, 42);
 	msg_set_type(msg, TIPC_CONN_MSG);
-	if (!may_route(peer->node))
-		msg_set_hdr_sz(msg, SHORT_H_SIZE);
-	else
-		msg_set_hdr_sz(msg, LONG_H_SIZE);
+	msg_set_hdr_sz(msg, SHORT_H_SIZE);
 
 	p_ptr->probing_interval = PROBING_INTERVAL;
 	p_ptr->probing_state = CONFIRMED;
 	p_ptr->publ.connected = 1;
 	k_start_timer(&p_ptr->timer, p_ptr->probing_interval);
 
-	tipc_nodesub_subscribe(&p_ptr->subscription,peer->node,
+	tipc_nodesub_subscribe(&p_ptr->subscription, peer->node,
 			  (void *)(unsigned long)ref,
 			  (net_ev_handler)port_handle_node_down);
 	res = 0;
@@ -1271,16 +1234,11 @@ int tipc_send(u32 ref, unsigned int num_sect, struct iovec const *msg_sect)
 }
 
 /**
- * tipc_forward2name - forward message sections to port name
+ * tipc_send2name - send message sections to port name
  */
 
-static int tipc_forward2name(u32 ref,
-			     struct tipc_name const *name,
-			     u32 domain,
-			     u32 num_sect,
-			     struct iovec const *msg_sect,
-			     struct tipc_portid const *orig,
-			     unsigned int importance)
+int tipc_send2name(u32 ref, struct tipc_name const *name, unsigned int domain,
+	   unsigned int num_sect, struct iovec const *msg_sect)
 {
 	struct port *p_ptr;
 	struct tipc_msg *msg;
@@ -1294,14 +1252,12 @@ static int tipc_forward2name(u32 ref,
 
 	msg = &p_ptr->publ.phdr;
 	msg_set_type(msg, TIPC_NAMED_MSG);
-	msg_set_orignode(msg, orig->node);
-	msg_set_origport(msg, orig->ref);
+	msg_set_orignode(msg, tipc_own_addr);
+	msg_set_origport(msg, ref);
 	msg_set_hdr_sz(msg, LONG_H_SIZE);
 	msg_set_nametype(msg, name->type);
 	msg_set_nameinst(msg, name->instance);
 	msg_set_lookup_scope(msg, tipc_addr_scope(domain));
-	if (importance <= TIPC_CRITICAL_IMPORTANCE)
-		msg_set_importance(msg,importance);
 	destport = tipc_nametbl_translate(name->type, name->instance, &destnode);
 	msg_set_destnode(msg, destnode);
 	msg_set_destport(msg, destport);
@@ -1325,33 +1281,11 @@ static int tipc_forward2name(u32 ref,
 }
 
 /**
- * tipc_send2name - send message sections to port name
- */
-
-int tipc_send2name(u32 ref,
-		   struct tipc_name const *name,
-		   unsigned int domain,
-		   unsigned int num_sect,
-		   struct iovec const *msg_sect)
-{
-	struct tipc_portid orig;
-
-	orig.ref = ref;
-	orig.node = tipc_own_addr;
-	return tipc_forward2name(ref, name, domain, num_sect, msg_sect, &orig,
-				 TIPC_PORT_IMPORTANCE);
-}
-
-/**
- * tipc_forward2port - forward message sections to port identity
+ * tipc_send2port - send message sections to port identity
  */
 
-static int tipc_forward2port(u32 ref,
-			     struct tipc_portid const *dest,
-			     unsigned int num_sect,
-			     struct iovec const *msg_sect,
-			     struct tipc_portid const *orig,
-			     unsigned int importance)
+int tipc_send2port(u32 ref, struct tipc_portid const *dest,
+	   unsigned int num_sect, struct iovec const *msg_sect)
 {
 	struct port *p_ptr;
 	struct tipc_msg *msg;
@@ -1363,13 +1297,11 @@ static int tipc_forward2port(u32 ref,
 
 	msg = &p_ptr->publ.phdr;
 	msg_set_type(msg, TIPC_DIRECT_MSG);
-	msg_set_orignode(msg, orig->node);
-	msg_set_origport(msg, orig->ref);
+	msg_set_orignode(msg, tipc_own_addr);
+	msg_set_origport(msg, ref);
 	msg_set_destnode(msg, dest->node);
 	msg_set_destport(msg, dest->ref);
 	msg_set_hdr_sz(msg, DIR_MSG_H_SIZE);
-	if (importance <= TIPC_CRITICAL_IMPORTANCE)
-		msg_set_importance(msg, importance);
 	p_ptr->sent++;
 	if (dest->node == tipc_own_addr)
 		return tipc_port_recv_sections(p_ptr, num_sect, msg_sect);
@@ -1384,31 +1316,11 @@ static int tipc_forward2port(u32 ref,
 }
 
 /**
- * tipc_send2port - send message sections to port identity
+ * tipc_send_buf2port - send message buffer to port identity
  */
 
-int tipc_send2port(u32 ref,
-		   struct tipc_portid const *dest,
-		   unsigned int num_sect,
-		   struct iovec const *msg_sect)
-{
-	struct tipc_portid orig;
-
-	orig.ref = ref;
-	orig.node = tipc_own_addr;
-	return tipc_forward2port(ref, dest, num_sect, msg_sect, &orig,
-				 TIPC_PORT_IMPORTANCE);
-}
-
-/**
- * tipc_forward_buf2port - forward message buffer to port identity
- */
-static int tipc_forward_buf2port(u32 ref,
-				 struct tipc_portid const *dest,
-				 struct sk_buff *buf,
-				 unsigned int dsz,
-				 struct tipc_portid const *orig,
-				 unsigned int importance)
+int tipc_send_buf2port(u32 ref, struct tipc_portid const *dest,
+	       struct sk_buff *buf, unsigned int dsz)
 {
 	struct port *p_ptr;
 	struct tipc_msg *msg;
@@ -1420,20 +1332,17 @@ static int tipc_forward_buf2port(u32 ref,
 
 	msg = &p_ptr->publ.phdr;
 	msg_set_type(msg, TIPC_DIRECT_MSG);
-	msg_set_orignode(msg, orig->node);
-	msg_set_origport(msg, orig->ref);
+	msg_set_orignode(msg, tipc_own_addr);
+	msg_set_origport(msg, ref);
 	msg_set_destnode(msg, dest->node);
 	msg_set_destport(msg, dest->ref);
 	msg_set_hdr_sz(msg, DIR_MSG_H_SIZE);
-	if (importance <= TIPC_CRITICAL_IMPORTANCE)
-		msg_set_importance(msg, importance);
 	msg_set_size(msg, DIR_MSG_H_SIZE + dsz);
 	if (skb_cow(buf, DIR_MSG_H_SIZE))
 		return -ENOMEM;
 
 	skb_push(buf, DIR_MSG_H_SIZE);
 	skb_copy_to_linear_data(buf, msg, DIR_MSG_H_SIZE);
-	msg_dbg(msg, "buf2port: ");
 	p_ptr->sent++;
 	if (dest->node == tipc_own_addr)
 		return tipc_port_recv_msg(buf);
@@ -1445,20 +1354,3 @@ static int tipc_forward_buf2port(u32 ref,
 	return -ELINKCONG;
 }
 
-/**
- * tipc_send_buf2port - send message buffer to port identity
- */
-
-int tipc_send_buf2port(u32 ref,
-		       struct tipc_portid const *dest,
-		       struct sk_buff *buf,
-		       unsigned int dsz)
-{
-	struct tipc_portid orig;
-
-	orig.ref = ref;
-	orig.node = tipc_own_addr;
-	return tipc_forward_buf2port(ref, dest, buf, dsz, &orig,
-				     TIPC_PORT_IMPORTANCE);
-}
-
diff --git a/net/tipc/port.h b/net/tipc/port.h
index 73bbf442b34..8e84b989949 100644
--- a/net/tipc/port.h
+++ b/net/tipc/port.h
@@ -37,24 +37,52 @@
 #ifndef _TIPC_PORT_H
 #define _TIPC_PORT_H
 
-#include "core.h"
 #include "ref.h"
 #include "net.h"
 #include "msg.h"
-#include "dbg.h"
 #include "node_subscr.h"
 
+#define TIPC_FLOW_CONTROL_WIN 512
+
+typedef void (*tipc_msg_err_event) (void *usr_handle, u32 portref,
+		struct sk_buff **buf, unsigned char const *data,
+		unsigned int size, int reason,
+		struct tipc_portid const *attmpt_destid);
+
+typedef void (*tipc_named_msg_err_event) (void *usr_handle, u32 portref,
+		struct sk_buff **buf, unsigned char const *data,
+		unsigned int size, int reason,
+		struct tipc_name_seq const *attmpt_dest);
+
+typedef void (*tipc_conn_shutdown_event) (void *usr_handle, u32 portref,
+		struct sk_buff **buf, unsigned char const *data,
+		unsigned int size, int reason);
+
+typedef void (*tipc_msg_event) (void *usr_handle, u32 portref,
+		struct sk_buff **buf, unsigned char const *data,
+		unsigned int size, unsigned int importance,
+		struct tipc_portid const *origin);
+
+typedef void (*tipc_named_msg_event) (void *usr_handle, u32 portref,
+		struct sk_buff **buf, unsigned char const *data,
+		unsigned int size, unsigned int importance,
+		struct tipc_portid const *orig,
+		struct tipc_name_seq const *dest);
+
+typedef void (*tipc_conn_msg_event) (void *usr_handle, u32 portref,
+		struct sk_buff **buf, unsigned char const *data,
+		unsigned int size);
+
+typedef void (*tipc_continue_event) (void *usr_handle, u32 portref);
+
 /**
  * struct user_port - TIPC user port (used with native API)
- * @user_ref: id of user who created user port
  * @usr_handle: user-specified field
  * @ref: object reference to associated TIPC port
  * <various callback routines>
- * @uport_list: adjacent user ports in list of ports held by user
  */
 
 struct user_port {
-	u32 user_ref;
 	void *usr_handle;
 	u32 ref;
 	tipc_msg_err_event err_cb;
@@ -64,7 +92,34 @@ struct user_port {
 	tipc_named_msg_event named_msg_cb;
 	tipc_conn_msg_event conn_msg_cb;
 	tipc_continue_event continue_event_cb;
-	struct list_head uport_list;
+};
+
+/**
+ * struct tipc_port - TIPC port info available to socket API
+ * @usr_handle: pointer to additional user-defined information about port
+ * @lock: pointer to spinlock for controlling access to port
+ * @connected: non-zero if port is currently connected to a peer port
+ * @conn_type: TIPC type used when connection was established
+ * @conn_instance: TIPC instance used when connection was established
+ * @conn_unacked: number of unacknowledged messages received from peer port
+ * @published: non-zero if port has one or more associated names
+ * @congested: non-zero if cannot send because of link or port congestion
+ * @max_pkt: maximum packet size "hint" used when building messages sent by port
+ * @ref: unique reference to port in TIPC object registry
+ * @phdr: preformatted message header used when sending messages
+ */
+struct tipc_port {
+	void *usr_handle;
+	spinlock_t *lock;
+	int connected;
+	u32 conn_type;
+	u32 conn_instance;
+	u32 conn_unacked;
+	int published;
+	u32 congested;
+	u32 max_pkt;
+	u32 ref;
+	struct tipc_msg phdr;
 };
 
 /**
@@ -109,11 +164,76 @@ struct port {
 extern spinlock_t tipc_port_list_lock;
 struct port_list;
 
+/*
+ * TIPC port manipulation routines
+ */
+struct tipc_port *tipc_createport_raw(void *usr_handle,
+		u32 (*dispatcher)(struct tipc_port *, struct sk_buff *),
+		void (*wakeup)(struct tipc_port *), const u32 importance);
+
+int tipc_reject_msg(struct sk_buff *buf, u32 err);
+
+int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode);
+
+void tipc_acknowledge(u32 port_ref, u32 ack);
+
+int tipc_createport(void *usr_handle,
+		unsigned int importance, tipc_msg_err_event error_cb,
+		tipc_named_msg_err_event named_error_cb,
+		tipc_conn_shutdown_event conn_error_cb, tipc_msg_event msg_cb,
+		tipc_named_msg_event named_msg_cb,
+		tipc_conn_msg_event conn_msg_cb,
+		tipc_continue_event continue_event_cb, u32 *portref);
+
+int tipc_deleteport(u32 portref);
+
+int tipc_portimportance(u32 portref, unsigned int *importance);
+int tipc_set_portimportance(u32 portref, unsigned int importance);
+
+int tipc_portunreliable(u32 portref, unsigned int *isunreliable);
+int tipc_set_portunreliable(u32 portref, unsigned int isunreliable);
+
+int tipc_portunreturnable(u32 portref, unsigned int *isunreturnable);
+int tipc_set_portunreturnable(u32 portref, unsigned int isunreturnable);
+
+int tipc_publish(u32 portref, unsigned int scope,
+		struct tipc_name_seq const *name_seq);
+int tipc_withdraw(u32 portref, unsigned int scope,
+		struct tipc_name_seq const *name_seq);
+
+int tipc_connect2port(u32 portref, struct tipc_portid const *port);
+
+int tipc_disconnect(u32 portref);
+
+int tipc_shutdown(u32 ref);
+
+
+/*
+ * The following routines require that the port be locked on entry
+ */
+int tipc_disconnect_port(struct tipc_port *tp_ptr);
+
+/*
+ * TIPC messaging routines
+ */
+int tipc_send(u32 portref, unsigned int num_sect, struct iovec const *msg_sect);
+
+int tipc_send2name(u32 portref, struct tipc_name const *name, u32 domain,
+		unsigned int num_sect, struct iovec const *msg_sect);
+
+int tipc_send2port(u32 portref, struct tipc_portid const *dest,
+		unsigned int num_sect, struct iovec const *msg_sect);
+
+int tipc_send_buf2port(u32 portref, struct tipc_portid const *dest,
+		struct sk_buff *buf, unsigned int dsz);
+
+int tipc_multicast(u32 portref, struct tipc_name_seq const *seq,
+		unsigned int section_count, struct iovec const *msg);
+
 int tipc_port_reject_sections(struct port *p_ptr, struct tipc_msg *hdr,
 			      struct iovec const *msg_sect, u32 num_sect,
 			      int err);
 struct sk_buff *tipc_port_get_ports(void);
-struct sk_buff *port_show_stats(const void *req_tlv_area, int req_tlv_space);
 void tipc_port_recv_proto_msg(struct sk_buff *buf);
 void tipc_port_recv_mcast(struct sk_buff *buf, struct port_list *dp);
 void tipc_port_reinit(void);
@@ -138,7 +258,7 @@ static inline void tipc_port_unlock(struct port *p_ptr)
 	spin_unlock_bh(p_ptr->publ.lock);
 }
 
-static inline struct port* tipc_port_deref(u32 ref)
+static inline struct port *tipc_port_deref(u32 ref)
 {
 	return (struct port *)tipc_ref_deref(ref);
 }
@@ -196,7 +316,6 @@ static inline int tipc_port_recv_msg(struct sk_buff *buf)
 		err = TIPC_ERR_NO_PORT;
 	}
 reject:
-	dbg("port->rejecting, err = %x..\n",err);
 	return tipc_reject_msg(buf, err);
 }
 
diff --git a/net/tipc/ref.c b/net/tipc/ref.c
index ab8ad32d8c2..83116892528 100644
--- a/net/tipc/ref.c
+++ b/net/tipc/ref.c
@@ -89,7 +89,7 @@ struct ref_table {
  * have a reference value of 0 (although this is unlikely).
  */
 
-static struct ref_table tipc_ref_table = { NULL };
+static struct ref_table tipc_ref_table;
 
 static DEFINE_RWLOCK(ref_table_lock);
 
@@ -178,14 +178,12 @@ u32 tipc_ref_acquire(void *object, spinlock_t **lock)
 		next_plus_upper = entry->ref;
 		tipc_ref_table.first_free = next_plus_upper & index_mask;
 		ref = (next_plus_upper & ~index_mask) + index;
-	}
-	else if (tipc_ref_table.init_point < tipc_ref_table.capacity) {
+	} else if (tipc_ref_table.init_point < tipc_ref_table.capacity) {
 		index = tipc_ref_table.init_point++;
 		entry = &(tipc_ref_table.entries[index]);
 		spin_lock_init(&entry->lock);
 		ref = tipc_ref_table.start_mask + index;
-	}
-	else {
+	} else {
 		ref = 0;
 	}
 	write_unlock_bh(&ref_table_lock);
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index 33217fc3d69..2b02a3a8031 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -34,25 +34,13 @@
  * POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/net.h>
-#include <linux/socket.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/poll.h>
-#include <linux/fcntl.h>
-#include <linux/gfp.h>
-#include <asm/string.h>
-#include <asm/atomic.h>
 #include <net/sock.h>
 
 #include <linux/tipc.h>
 #include <linux/tipc_config.h>
-#include <net/tipc/tipc_msg.h>
-#include <net/tipc/tipc_port.h>
 
 #include "core.h"
+#include "port.h"
 
 #define SS_LISTENING	-1	/* socket is listening */
 #define SS_READY	-2	/* socket is connectionless */
@@ -80,7 +68,7 @@ static const struct proto_ops msg_ops;
 
 static struct proto tipc_proto;
 
-static int sockets_enabled = 0;
+static int sockets_enabled;
 
 static atomic_t tipc_queue_size = ATOMIC_INIT(0);
 
@@ -387,7 +375,7 @@ static int bind(struct socket *sock, struct sockaddr *uaddr, int uaddr_len)
  *
  * NOTE: This routine doesn't need to take the socket lock since it only
  *       accesses socket information that is unchanging (or which changes in
- * 	 a completely predictable manner).
+ *       a completely predictable manner).
  */
 
 static int get_name(struct socket *sock, struct sockaddr *uaddr,
@@ -396,6 +384,7 @@ static int get_name(struct socket *sock, struct sockaddr *uaddr,
 	struct sockaddr_tipc *addr = (struct sockaddr_tipc *)uaddr;
 	struct tipc_sock *tsock = tipc_sk(sock->sk);
 
+	memset(addr, 0, sizeof(*addr));
 	if (peer) {
 		if ((sock->state != SS_CONNECTED) &&
 			((peer != 2) || (sock->state != SS_DISCONNECTING)))
@@ -403,7 +392,8 @@ static int get_name(struct socket *sock, struct sockaddr *uaddr,
 		addr->addr.id.ref = tsock->peer_name.ref;
 		addr->addr.id.node = tsock->peer_name.node;
 	} else {
-		tipc_ownidentity(tsock->p->ref, &addr->addr.id);
+		addr->addr.id.ref = tsock->p->ref;
+		addr->addr.id.node = tipc_own_addr;
 	}
 
 	*uaddr_len = sizeof(*addr);
@@ -573,37 +563,35 @@ static int send_msg(struct kiocb *iocb, struct socket *sock,
 
 	do {
 		if (dest->addrtype == TIPC_ADDR_NAME) {
-			if ((res = dest_name_check(dest, m)))
+			res = dest_name_check(dest, m);
+			if (res)
 				break;
 			res = tipc_send2name(tport->ref,
 					     &dest->addr.name.name,
 					     dest->addr.name.domain,
 					     m->msg_iovlen,
 					     m->msg_iov);
-		}
-		else if (dest->addrtype == TIPC_ADDR_ID) {
+		} else if (dest->addrtype == TIPC_ADDR_ID) {
 			res = tipc_send2port(tport->ref,
 					     &dest->addr.id,
 					     m->msg_iovlen,
 					     m->msg_iov);
-		}
-		else if (dest->addrtype == TIPC_ADDR_MCAST) {
+		} else if (dest->addrtype == TIPC_ADDR_MCAST) {
 			if (needs_conn) {
 				res = -EOPNOTSUPP;
 				break;
 			}
-			if ((res = dest_name_check(dest, m)))
+			res = dest_name_check(dest, m);
+			if (res)
 				break;
 			res = tipc_multicast(tport->ref,
 					     &dest->addr.nameseq,
-					     0,
 					     m->msg_iovlen,
 					     m->msg_iov);
 		}
 		if (likely(res != -ELINKCONG)) {
-			if (needs_conn && (res >= 0)) {
+			if (needs_conn && (res >= 0))
 				sock->state = SS_CONNECTING;
-			}
 			break;
 		}
 		if (m->msg_flags & MSG_DONTWAIT) {
@@ -662,9 +650,8 @@ static int send_packet(struct kiocb *iocb, struct socket *sock,
 		}
 
 		res = tipc_send(tport->ref, m->msg_iovlen, m->msg_iov);
-		if (likely(res != -ELINKCONG)) {
+		if (likely(res != -ELINKCONG))
 			break;
-		}
 		if (m->msg_flags & MSG_DONTWAIT) {
 			res = -EWOULDBLOCK;
 			break;
@@ -763,7 +750,8 @@ static int send_stream(struct kiocb *iocb, struct socket *sock,
 				bytes_to_send = curr_left;
 			my_iov.iov_base = curr_start;
 			my_iov.iov_len = bytes_to_send;
-			if ((res = send_packet(NULL, sock, &my_msg, 0)) < 0) {
+			res = send_packet(NULL, sock, &my_msg, 0);
+			if (res < 0) {
 				if (bytes_sent)
 					res = bytes_sent;
 				goto exit;
@@ -823,8 +811,8 @@ static void set_orig_addr(struct msghdr *m, struct tipc_msg *msg)
 		addr->addrtype = TIPC_ADDR_ID;
 		addr->addr.id.ref = msg_origport(msg);
 		addr->addr.id.node = msg_orignode(msg);
-		addr->addr.name.domain = 0;   	/* could leave uninitialized */
-		addr->scope = 0;   		/* could leave uninitialized */
+		addr->addr.name.domain = 0;	/* could leave uninitialized */
+		addr->scope = 0;		/* could leave uninitialized */
 		m->msg_namelen = sizeof(struct sockaddr_tipc);
 	}
 }
@@ -858,12 +846,15 @@ static int anc_data_recv(struct msghdr *m, struct tipc_msg *msg,
 	if (unlikely(err)) {
 		anc_data[0] = err;
 		anc_data[1] = msg_data_sz(msg);
-		if ((res = put_cmsg(m, SOL_TIPC, TIPC_ERRINFO, 8, anc_data)))
-			return res;
-		if (anc_data[1] &&
-		    (res = put_cmsg(m, SOL_TIPC, TIPC_RETDATA, anc_data[1],
-				    msg_data(msg))))
+		res = put_cmsg(m, SOL_TIPC, TIPC_ERRINFO, 8, anc_data);
+		if (res)
 			return res;
+		if (anc_data[1]) {
+			res = put_cmsg(m, SOL_TIPC, TIPC_RETDATA, anc_data[1],
+				       msg_data(msg));
+			if (res)
+				return res;
+		}
 	}
 
 	/* Optionally capture message destination object */
@@ -891,9 +882,11 @@ static int anc_data_recv(struct msghdr *m, struct tipc_msg *msg,
 	default:
 		has_name = 0;
 	}
-	if (has_name &&
-	    (res = put_cmsg(m, SOL_TIPC, TIPC_DESTNAME, 12, anc_data)))
-		return res;
+	if (has_name) {
+		res = put_cmsg(m, SOL_TIPC, TIPC_DESTNAME, 12, anc_data);
+		if (res)
+			return res;
+	}
 
 	return 0;
 }
@@ -1226,42 +1219,25 @@ static u32 filter_rcv(struct sock *sk, struct sk_buff *buf)
 	 */
 
 	if (sock->state == SS_READY) {
-		if (msg_connected(msg)) {
-			msg_dbg(msg, "dispatch filter 1\n");
+		if (msg_connected(msg))
 			return TIPC_ERR_NO_PORT;
-		}
 	} else {
-		if (msg_mcast(msg)) {
-			msg_dbg(msg, "dispatch filter 2\n");
+		if (msg_mcast(msg))
 			return TIPC_ERR_NO_PORT;
-		}
 		if (sock->state == SS_CONNECTED) {
-			if (!msg_connected(msg)) {
-				msg_dbg(msg, "dispatch filter 3\n");
+			if (!msg_connected(msg))
 				return TIPC_ERR_NO_PORT;
-			}
-		}
-		else if (sock->state == SS_CONNECTING) {
-			if (!msg_connected(msg) && (msg_errcode(msg) == 0)) {
-				msg_dbg(msg, "dispatch filter 4\n");
+		} else if (sock->state == SS_CONNECTING) {
+			if (!msg_connected(msg) && (msg_errcode(msg) == 0))
 				return TIPC_ERR_NO_PORT;
-			}
-		}
-		else if (sock->state == SS_LISTENING) {
-			if (msg_connected(msg) || msg_errcode(msg)) {
-				msg_dbg(msg, "dispatch filter 5\n");
+		} else if (sock->state == SS_LISTENING) {
+			if (msg_connected(msg) || msg_errcode(msg))
 				return TIPC_ERR_NO_PORT;
-			}
-		}
-		else if (sock->state == SS_DISCONNECTING) {
-			msg_dbg(msg, "dispatch filter 6\n");
+		} else if (sock->state == SS_DISCONNECTING) {
 			return TIPC_ERR_NO_PORT;
-		}
-		else /* (sock->state == SS_UNCONNECTED) */ {
-			if (msg_connected(msg) || msg_errcode(msg)) {
-				msg_dbg(msg, "dispatch filter 7\n");
+		} else /* (sock->state == SS_UNCONNECTED) */ {
+			if (msg_connected(msg) || msg_errcode(msg))
 				return TIPC_ERR_NO_PORT;
-			}
 		}
 	}
 
@@ -1280,7 +1256,6 @@ static u32 filter_rcv(struct sock *sk, struct sk_buff *buf)
 
 	/* Enqueue message (finally!) */
 
-	msg_dbg(msg, "<DISP<: ");
 	TIPC_SKB_CB(buf)->handle = msg_data(msg);
 	atomic_inc(&tipc_queue_size);
 	__skb_queue_tail(&sk->sk_receive_queue, buf);
@@ -1441,9 +1416,8 @@ static int connect(struct socket *sock, struct sockaddr *dest, int destlen,
 	m.msg_name = dest;
 	m.msg_namelen = destlen;
 	res = send_msg(NULL, sock, &m, 0);
-	if (res < 0) {
+	if (res < 0)
 		goto exit;
-	}
 
 	/* Wait until an 'ACK' or 'RST' arrives, or a timeout occurs */
 
@@ -1465,11 +1439,10 @@ static int connect(struct socket *sock, struct sockaddr *dest, int destlen,
 					advance_rx_queue(sk);
 			}
 		} else {
-			if (sock->state == SS_CONNECTED) {
+			if (sock->state == SS_CONNECTED)
 				res = -EISCONN;
-			} else {
+			else
 				res = -ECONNREFUSED;
-			}
 		}
 	} else {
 		if (res == 0)
@@ -1588,7 +1561,6 @@ static int accept(struct socket *sock, struct socket *new_sock, int flags)
 		 * Respond to 'SYN+' by queuing it on new socket.
 		 */
 
-		msg_dbg(msg,"<ACC<: ");
 		if (!msg_data_sz(msg)) {
 			struct msghdr m = {NULL,};
 
@@ -1696,7 +1668,8 @@ static int setsockopt(struct socket *sock,
 		return -ENOPROTOOPT;
 	if (ol < sizeof(value))
 		return -EINVAL;
-	if ((res = get_user(value, (u32 __user *)ov)))
+	res = get_user(value, (u32 __user *)ov);
+	if (res)
 		return res;
 
 	lock_sock(sk);
@@ -1754,7 +1727,8 @@ static int getsockopt(struct socket *sock,
 		return put_user(0, ol);
 	if (lvl != SOL_TIPC)
 		return -ENOPROTOOPT;
-	if ((res = get_user(len, ol)))
+	res = get_user(len, ol);
+	if (res)
 		return res;
 
 	lock_sock(sk);
@@ -1773,10 +1747,10 @@ static int getsockopt(struct socket *sock,
 		value = jiffies_to_msecs(tipc_sk(sk)->conn_timeout);
 		/* no need to set "res", since already 0 at this point */
 		break;
-	 case TIPC_NODE_RECVQ_DEPTH:
+	case TIPC_NODE_RECVQ_DEPTH:
 		value = (u32)atomic_read(&tipc_queue_size);
 		break;
-	 case TIPC_SOCK_RECVQ_DEPTH:
+	case TIPC_SOCK_RECVQ_DEPTH:
 		value = skb_queue_len(&sk->sk_receive_queue);
 		break;
 	default:
@@ -1785,20 +1759,16 @@ static int getsockopt(struct socket *sock,
 
 	release_sock(sk);
 
-	if (res) {
-		/* "get" failed */
-	}
-	else if (len < sizeof(value)) {
-		res = -EINVAL;
-	}
-	else if (copy_to_user(ov, &value, sizeof(value))) {
-		res = -EFAULT;
-	}
-	else {
-		res = put_user(sizeof(value), ol);
-	}
+	if (res)
+		return res;	/* "get" failed */
 
-	return res;
+	if (len < sizeof(value))
+		return -EINVAL;
+
+	if (copy_to_user(ov, &value, sizeof(value)))
+		return -EFAULT;
+
+	return put_user(sizeof(value), ol);
 }
 
 /**
@@ -1806,7 +1776,7 @@ static int getsockopt(struct socket *sock,
  */
 
 static const struct proto_ops msg_ops = {
-	.owner 		= THIS_MODULE,
+	.owner		= THIS_MODULE,
 	.family		= AF_TIPC,
 	.release	= release,
 	.bind		= bind,
@@ -1827,7 +1797,7 @@ static const struct proto_ops msg_ops = {
 };
 
 static const struct proto_ops packet_ops = {
-	.owner 		= THIS_MODULE,
+	.owner		= THIS_MODULE,
 	.family		= AF_TIPC,
 	.release	= release,
 	.bind		= bind,
@@ -1848,7 +1818,7 @@ static const struct proto_ops packet_ops = {
 };
 
 static const struct proto_ops stream_ops = {
-	.owner 		= THIS_MODULE,
+	.owner		= THIS_MODULE,
 	.family		= AF_TIPC,
 	.release	= release,
 	.bind		= bind,
@@ -1869,7 +1839,7 @@ static const struct proto_ops stream_ops = {
 };
 
 static const struct net_proto_family tipc_family_ops = {
-	.owner 		= THIS_MODULE,
+	.owner		= THIS_MODULE,
 	.family		= AF_TIPC,
 	.create		= tipc_create
 };
diff --git a/net/tipc/subscr.c b/net/tipc/subscr.c
index 33313961d01..ca04479c3d4 100644
--- a/net/tipc/subscr.c
+++ b/net/tipc/subscr.c
@@ -35,10 +35,8 @@
  */
 
 #include "core.h"
-#include "dbg.h"
 #include "name_table.h"
 #include "port.h"
-#include "ref.h"
 #include "subscr.h"
 
 /**
@@ -66,14 +64,13 @@ struct subscriber {
  */
 
 struct top_srv {
-	u32 user_ref;
 	u32 setup_port;
 	atomic_t subscription_count;
 	struct list_head subscriber_list;
 	spinlock_t lock;
 };
 
-static struct top_srv topsrv = { 0 };
+static struct top_srv topsrv;
 
 /**
  * htohl - convert value to endianness used by destination
@@ -252,8 +249,6 @@ static void subscr_terminate(struct subscriber *subscriber)
 			k_cancel_timer(&sub->timer);
 			k_term_timer(&sub->timer);
 		}
-		dbg("Term: Removing sub %u,%u,%u from subscriber %x list\n",
-		    sub->seq.type, sub->seq.lower, sub->seq.upper, subscriber);
 		subscr_del(sub);
 	}
 
@@ -310,8 +305,6 @@ static void subscr_cancel(struct tipc_subscr *s,
 		k_term_timer(&sub->timer);
 		spin_lock_bh(subscriber->lock);
 	}
-	dbg("Cancel: removing sub %u,%u,%u from subscriber %x list\n",
-	    sub->seq.type, sub->seq.lower, sub->seq.upper, subscriber);
 	subscr_del(sub);
 }
 
@@ -496,8 +489,7 @@ static void subscr_named_msg_event(void *usr_handle,
 
 	/* Create server port & establish connection to subscriber */
 
-	tipc_createport(topsrv.user_ref,
-			subscriber,
+	tipc_createport(subscriber,
 			importance,
 			NULL,
 			NULL,
@@ -544,21 +536,14 @@ static void subscr_named_msg_event(void *usr_handle,
 int tipc_subscr_start(void)
 {
 	struct tipc_name_seq seq = {TIPC_TOP_SRV, TIPC_TOP_SRV, TIPC_TOP_SRV};
-	int res = -1;
+	int res;
 
-	memset(&topsrv, 0, sizeof (topsrv));
+	memset(&topsrv, 0, sizeof(topsrv));
 	spin_lock_init(&topsrv.lock);
 	INIT_LIST_HEAD(&topsrv.subscriber_list);
 
 	spin_lock_bh(&topsrv.lock);
-	res = tipc_attach(&topsrv.user_ref, NULL, NULL);
-	if (res) {
-		spin_unlock_bh(&topsrv.lock);
-		return res;
-	}
-
-	res = tipc_createport(topsrv.user_ref,
-			      NULL,
+	res = tipc_createport(NULL,
 			      TIPC_CRITICAL_IMPORTANCE,
 			      NULL,
 			      NULL,
@@ -572,16 +557,17 @@ int tipc_subscr_start(void)
 		goto failed;
 
 	res = tipc_nametbl_publish_rsv(topsrv.setup_port, TIPC_NODE_SCOPE, &seq);
-	if (res)
+	if (res) {
+		tipc_deleteport(topsrv.setup_port);
+		topsrv.setup_port = 0;
 		goto failed;
+	}
 
 	spin_unlock_bh(&topsrv.lock);
 	return 0;
 
 failed:
 	err("Failed to create subscription service\n");
-	tipc_detach(topsrv.user_ref);
-	topsrv.user_ref = 0;
 	spin_unlock_bh(&topsrv.lock);
 	return res;
 }
@@ -592,8 +578,10 @@ void tipc_subscr_stop(void)
 	struct subscriber *subscriber_temp;
 	spinlock_t *subscriber_lock;
 
-	if (topsrv.user_ref) {
+	if (topsrv.setup_port) {
 		tipc_deleteport(topsrv.setup_port);
+		topsrv.setup_port = 0;
+
 		list_for_each_entry_safe(subscriber, subscriber_temp,
 					 &topsrv.subscriber_list,
 					 subscriber_list) {
@@ -602,7 +590,5 @@ void tipc_subscr_stop(void)
 			subscr_terminate(subscriber);
 			spin_unlock_bh(subscriber_lock);
 		}
-		tipc_detach(topsrv.user_ref);
-		topsrv.user_ref = 0;
 	}
 }
diff --git a/net/tipc/user_reg.c b/net/tipc/user_reg.c
deleted file mode 100644
index 50692880316..00000000000
--- a/net/tipc/user_reg.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * net/tipc/user_reg.c: TIPC user registry code
- *
- * Copyright (c) 2000-2006, Ericsson AB
- * Copyright (c) 2004-2005, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "core.h"
-#include "user_reg.h"
-
-/*
- * TIPC user registry keeps track of users of the tipc_port interface.
- *
- * The registry utilizes an array of "TIPC user" entries;
- * a user's ID is the index of their associated array entry.
- * Array entry 0 is not used, so userid 0 is not valid;
- * TIPC sometimes uses this value to denote an anonymous user.
- * The list of free entries is initially chained from last entry to entry 1.
- */
-
-/**
- * struct tipc_user - registered TIPC user info
- * @next: index of next free registry entry (or -1 for an allocated entry)
- * @callback: ptr to routine to call when TIPC mode changes (NULL if none)
- * @usr_handle: user-defined value passed to callback routine
- * @ports: list of user ports owned by the user
- */
-
-struct tipc_user {
-	int next;
-	tipc_mode_event callback;
-	void *usr_handle;
-	struct list_head ports;
-};
-
-#define MAX_USERID 64
-#define USER_LIST_SIZE ((MAX_USERID + 1) * sizeof(struct tipc_user))
-
-static struct tipc_user *users = NULL;
-static u32 next_free_user = MAX_USERID + 1;
-static DEFINE_SPINLOCK(reg_lock);
-
-/**
- * reg_init - create TIPC user registry (but don't activate it)
- *
- * If registry has been pre-initialized it is left "as is".
- * NOTE: This routine may be called when TIPC is inactive.
- */
-
-static int reg_init(void)
-{
-	u32 i;
-
-	spin_lock_bh(&reg_lock);
-	if (!users) {
-		users = kzalloc(USER_LIST_SIZE, GFP_ATOMIC);
-		if (users) {
-			for (i = 1; i <= MAX_USERID; i++) {
-				users[i].next = i - 1;
-			}
-			next_free_user = MAX_USERID;
-		}
-	}
-	spin_unlock_bh(&reg_lock);
-	return users ? 0 : -ENOMEM;
-}
-
-/**
- * reg_callback - inform TIPC user about current operating mode
- */
-
-static void reg_callback(struct tipc_user *user_ptr)
-{
-	tipc_mode_event cb;
-	void *arg;
-
-	spin_lock_bh(&reg_lock);
-	cb = user_ptr->callback;
-	arg = user_ptr->usr_handle;
-	spin_unlock_bh(&reg_lock);
-
-	if (cb)
-		cb(arg, tipc_mode, tipc_own_addr);
-}
-
-/**
- * tipc_reg_start - activate TIPC user registry
- */
-
-int tipc_reg_start(void)
-{
-	u32 u;
-	int res;
-
-	if ((res = reg_init()))
-		return res;
-
-	for (u = 1; u <= MAX_USERID; u++) {
-		if (users[u].callback)
-			tipc_k_signal((Handler)reg_callback,
-				      (unsigned long)&users[u]);
-	}
-	return 0;
-}
-
-/**
- * tipc_reg_stop - shut down & delete TIPC user registry
- */
-
-void tipc_reg_stop(void)
-{
-	int id;
-
-	if (!users)
-		return;
-
-	for (id = 1; id <= MAX_USERID; id++) {
-		if (users[id].callback)
-			reg_callback(&users[id]);
-	}
-	kfree(users);
-	users = NULL;
-}
-
-/**
- * tipc_attach - register a TIPC user
- *
- * NOTE: This routine may be called when TIPC is inactive.
- */
-
-int tipc_attach(u32 *userid, tipc_mode_event cb, void *usr_handle)
-{
-	struct tipc_user *user_ptr;
-
-	if ((tipc_mode == TIPC_NOT_RUNNING) && !cb)
-		return -ENOPROTOOPT;
-	if (!users)
-		reg_init();
-
-	spin_lock_bh(&reg_lock);
-	if (!next_free_user) {
-		spin_unlock_bh(&reg_lock);
-		return -EBUSY;
-	}
-	user_ptr = &users[next_free_user];
-	*userid = next_free_user;
-	next_free_user = user_ptr->next;
-	user_ptr->next = -1;
-	spin_unlock_bh(&reg_lock);
-
-	user_ptr->callback = cb;
-	user_ptr->usr_handle = usr_handle;
-	INIT_LIST_HEAD(&user_ptr->ports);
-	atomic_inc(&tipc_user_count);
-
-	if (cb && (tipc_mode != TIPC_NOT_RUNNING))
-		tipc_k_signal((Handler)reg_callback, (unsigned long)user_ptr);
-	return 0;
-}
-
-/**
- * tipc_detach - deregister a TIPC user
- */
-
-void tipc_detach(u32 userid)
-{
-	struct tipc_user *user_ptr;
-	struct list_head ports_temp;
-	struct user_port *up_ptr, *temp_up_ptr;
-
-	if ((userid == 0) || (userid > MAX_USERID))
-		return;
-
-	spin_lock_bh(&reg_lock);
-	if ((!users) || (users[userid].next >= 0)) {
-		spin_unlock_bh(&reg_lock);
-		return;
-	}
-
-	user_ptr = &users[userid];
-	user_ptr->callback = NULL;
-	INIT_LIST_HEAD(&ports_temp);
-	list_splice(&user_ptr->ports, &ports_temp);
-	user_ptr->next = next_free_user;
-	next_free_user = userid;
-	spin_unlock_bh(&reg_lock);
-
-	atomic_dec(&tipc_user_count);
-
-	list_for_each_entry_safe(up_ptr, temp_up_ptr, &ports_temp, uport_list) {
-		tipc_deleteport(up_ptr->ref);
-	}
-}
-
-/**
- * tipc_reg_add_port - register a user's driver port
- */
-
-int tipc_reg_add_port(struct user_port *up_ptr)
-{
-	struct tipc_user *user_ptr;
-
-	if (up_ptr->user_ref == 0)
-		return 0;
-	if (up_ptr->user_ref > MAX_USERID)
-		return -EINVAL;
-	if ((tipc_mode == TIPC_NOT_RUNNING) || !users )
-		return -ENOPROTOOPT;
-
-	spin_lock_bh(&reg_lock);
-	user_ptr = &users[up_ptr->user_ref];
-	list_add(&up_ptr->uport_list, &user_ptr->ports);
-	spin_unlock_bh(&reg_lock);
-	return 0;
-}
-
-/**
- * tipc_reg_remove_port - deregister a user's driver port
- */
-
-int tipc_reg_remove_port(struct user_port *up_ptr)
-{
-	if (up_ptr->user_ref == 0)
-		return 0;
-	if (up_ptr->user_ref > MAX_USERID)
-		return -EINVAL;
-	if (!users )
-		return -ENOPROTOOPT;
-
-	spin_lock_bh(&reg_lock);
-	list_del_init(&up_ptr->uport_list);
-	spin_unlock_bh(&reg_lock);
-	return 0;
-}
-
diff --git a/net/tipc/user_reg.h b/net/tipc/user_reg.h
deleted file mode 100644
index 81dc12e2882..00000000000
--- a/net/tipc/user_reg.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * net/tipc/user_reg.h: Include file for TIPC user registry code
- *
- * Copyright (c) 2000-2006, Ericsson AB
- * Copyright (c) 2005, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _TIPC_USER_REG_H
-#define _TIPC_USER_REG_H
-
-#include "port.h"
-
-int tipc_reg_start(void);
-void tipc_reg_stop(void);
-
-int tipc_reg_add_port(struct user_port *up_ptr);
-int tipc_reg_remove_port(struct user_port *up_ptr);
-
-#endif
diff --git a/net/tipc/zone.c b/net/tipc/zone.c
deleted file mode 100644
index 83f8b5e91fc..00000000000
--- a/net/tipc/zone.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * net/tipc/zone.c: TIPC zone management routines
- *
- * Copyright (c) 2000-2006, Ericsson AB
- * Copyright (c) 2005, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "core.h"
-#include "zone.h"
-#include "net.h"
-#include "addr.h"
-#include "node_subscr.h"
-#include "cluster.h"
-#include "node.h"
-
-struct _zone *tipc_zone_create(u32 addr)
-{
-	struct _zone *z_ptr;
-	u32 z_num;
-
-	if (!tipc_addr_domain_valid(addr)) {
-		err("Zone creation failed, invalid domain 0x%x\n", addr);
-		return NULL;
-	}
-
-	z_ptr = kzalloc(sizeof(*z_ptr), GFP_ATOMIC);
-	if (!z_ptr) {
-		warn("Zone creation failed, insufficient memory\n");
-		return NULL;
-	}
-
-	z_num = tipc_zone(addr);
-	z_ptr->addr = tipc_addr(z_num, 0, 0);
-	tipc_net.zones[z_num] = z_ptr;
-	return z_ptr;
-}
-
-void tipc_zone_delete(struct _zone *z_ptr)
-{
-	u32 c_num;
-
-	if (!z_ptr)
-		return;
-	for (c_num = 1; c_num <= tipc_max_clusters; c_num++) {
-		tipc_cltr_delete(z_ptr->clusters[c_num]);
-	}
-	kfree(z_ptr);
-}
-
-void tipc_zone_attach_cluster(struct _zone *z_ptr, struct cluster *c_ptr)
-{
-	u32 c_num = tipc_cluster(c_ptr->addr);
-
-	assert(c_ptr->addr);
-	assert(c_num <= tipc_max_clusters);
-	assert(z_ptr->clusters[c_num] == NULL);
-	z_ptr->clusters[c_num] = c_ptr;
-}
-
-void tipc_zone_remove_as_router(struct _zone *z_ptr, u32 router)
-{
-	u32 c_num;
-
-	for (c_num = 1; c_num <= tipc_max_clusters; c_num++) {
-		if (z_ptr->clusters[c_num]) {
-			tipc_cltr_remove_as_router(z_ptr->clusters[c_num],
-						   router);
-		}
-	}
-}
-
-void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest)
-{
-	u32 c_num;
-
-	for (c_num = 1; c_num <= tipc_max_clusters; c_num++) {
-		if (z_ptr->clusters[c_num]) {
-			if (in_own_cluster(z_ptr->addr))
-				continue;
-			tipc_cltr_send_ext_routes(z_ptr->clusters[c_num], dest);
-		}
-	}
-}
-
-struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
-{
-	struct cluster *c_ptr;
-	struct tipc_node *n_ptr;
-	u32 c_num;
-
-	if (!z_ptr)
-		return NULL;
-	c_ptr = z_ptr->clusters[tipc_cluster(addr)];
-	if (!c_ptr)
-		return NULL;
-	n_ptr = tipc_cltr_select_node(c_ptr, ref);
-	if (n_ptr)
-		return n_ptr;
-
-	/* Links to any other clusters within this zone ? */
-	for (c_num = 1; c_num <= tipc_max_clusters; c_num++) {
-		c_ptr = z_ptr->clusters[c_num];
-		if (!c_ptr)
-			return NULL;
-		n_ptr = tipc_cltr_select_node(c_ptr, ref);
-		if (n_ptr)
-			return n_ptr;
-	}
-	return NULL;
-}
-
-u32 tipc_zone_select_router(struct _zone *z_ptr, u32 addr, u32 ref)
-{
-	struct cluster *c_ptr;
-	u32 c_num;
-	u32 router;
-
-	if (!z_ptr)
-		return 0;
-	c_ptr = z_ptr->clusters[tipc_cluster(addr)];
-	router = c_ptr ? tipc_cltr_select_router(c_ptr, ref) : 0;
-	if (router)
-		return router;
-
-	/* Links to any other clusters within the zone? */
-	for (c_num = 1; c_num <= tipc_max_clusters; c_num++) {
-		c_ptr = z_ptr->clusters[c_num];
-		router = c_ptr ? tipc_cltr_select_router(c_ptr, ref) : 0;
-		if (router)
-			return router;
-	}
-	return 0;
-}
diff --git a/net/tipc/zone.h b/net/tipc/zone.h
deleted file mode 100644
index bd1c20ce9d0..00000000000
--- a/net/tipc/zone.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * net/tipc/zone.h: Include file for TIPC zone management routines
- *
- * Copyright (c) 2000-2006, Ericsson AB
- * Copyright (c) 2005-2006, Wind River Systems
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _TIPC_ZONE_H
-#define _TIPC_ZONE_H
-
-#include "node_subscr.h"
-#include "net.h"
-
-
-/**
- * struct _zone - TIPC zone structure
- * @addr: network address of zone
- * @clusters: array of pointers to all clusters within zone
- * @links: number of (unicast) links to zone
- */
-
-struct _zone {
-	u32 addr;
-	struct cluster *clusters[2]; /* currently limited to just 1 cluster */
-	u32 links;
-};
-
-struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
-u32 tipc_zone_select_router(struct _zone *z_ptr, u32 addr, u32 ref);
-void tipc_zone_remove_as_router(struct _zone *z_ptr, u32 router);
-void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest);
-struct _zone *tipc_zone_create(u32 addr);
-void tipc_zone_delete(struct _zone *z_ptr);
-void tipc_zone_attach_cluster(struct _zone *z_ptr, struct cluster *c_ptr);
-
-static inline struct _zone *tipc_zone_find(u32 addr)
-{
-	return tipc_net.zones[tipc_zone(addr)];
-}
-
-#endif
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index 7ff31c60186..dd419d28620 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1157,7 +1157,7 @@ restart:
 		goto restart;
 	}
 
-	err = security_unix_stream_connect(sock, other->sk_socket, newsk);
+	err = security_unix_stream_connect(sk, other, newsk);
 	if (err) {
 		unix_state_unlock(sk);
 		goto out_unlock;
@@ -1344,9 +1344,25 @@ static void unix_destruct_scm(struct sk_buff *skb)
 	sock_wfree(skb);
 }
 
+#define MAX_RECURSION_LEVEL 4
+
 static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
 {
 	int i;
+	unsigned char max_level = 0;
+	int unix_sock_count = 0;
+
+	for (i = scm->fp->count - 1; i >= 0; i--) {
+		struct sock *sk = unix_get_socket(scm->fp->fp[i]);
+
+		if (sk) {
+			unix_sock_count++;
+			max_level = max(max_level,
+					unix_sk(sk)->recursion_level);
+		}
+	}
+	if (unlikely(max_level > MAX_RECURSION_LEVEL))
+		return -ETOOMANYREFS;
 
 	/*
 	 * Need to duplicate file references for the sake of garbage
@@ -1357,9 +1373,11 @@ static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
 	if (!UNIXCB(skb).fp)
 		return -ENOMEM;
 
-	for (i = scm->fp->count-1; i >= 0; i--)
-		unix_inflight(scm->fp->fp[i]);
-	return 0;
+	if (unix_sock_count) {
+		for (i = scm->fp->count - 1; i >= 0; i--)
+			unix_inflight(scm->fp->fp[i]);
+	}
+	return max_level;
 }
 
 static int unix_scm_to_skb(struct scm_cookie *scm, struct sk_buff *skb, bool send_fds)
@@ -1394,6 +1412,7 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	struct sk_buff *skb;
 	long timeo;
 	struct scm_cookie tmp_scm;
+	int max_level;
 
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
@@ -1432,8 +1451,9 @@ static int unix_dgram_sendmsg(struct kiocb *kiocb, struct socket *sock,
 		goto out;
 
 	err = unix_scm_to_skb(siocb->scm, skb, true);
-	if (err)
+	if (err < 0)
 		goto out_free;
+	max_level = err + 1;
 	unix_get_secdata(siocb->scm, skb);
 
 	skb_reset_transport_header(skb);
@@ -1515,6 +1535,8 @@ restart:
 	if (sock_flag(other, SOCK_RCVTSTAMP))
 		__net_timestamp(skb);
 	skb_queue_tail(&other->sk_receive_queue, skb);
+	if (max_level > unix_sk(other)->recursion_level)
+		unix_sk(other)->recursion_level = max_level;
 	unix_state_unlock(other);
 	other->sk_data_ready(other, len);
 	sock_put(other);
@@ -1545,6 +1567,7 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock,
 	int sent = 0;
 	struct scm_cookie tmp_scm;
 	bool fds_sent = false;
+	int max_level;
 
 	if (NULL == siocb->scm)
 		siocb->scm = &tmp_scm;
@@ -1608,10 +1631,11 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock,
 
 		/* Only send the fds in the first buffer */
 		err = unix_scm_to_skb(siocb->scm, skb, !fds_sent);
-		if (err) {
+		if (err < 0) {
 			kfree_skb(skb);
 			goto out_err;
 		}
+		max_level = err + 1;
 		fds_sent = true;
 
 		err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
@@ -1627,6 +1651,8 @@ static int unix_stream_sendmsg(struct kiocb *kiocb, struct socket *sock,
 			goto pipe_err_free;
 
 		skb_queue_tail(&other->sk_receive_queue, skb);
+		if (max_level > unix_sk(other)->recursion_level)
+			unix_sk(other)->recursion_level = max_level;
 		unix_state_unlock(other);
 		other->sk_data_ready(other, size);
 		sent += size;
@@ -1847,6 +1873,7 @@ static int unix_stream_recvmsg(struct kiocb *iocb, struct socket *sock,
 		unix_state_lock(sk);
 		skb = skb_dequeue(&sk->sk_receive_queue);
 		if (skb == NULL) {
+			unix_sk(sk)->recursion_level = 0;
 			if (copied >= target)
 				goto unlock;
 
diff --git a/net/unix/garbage.c b/net/unix/garbage.c
index c8df6fda0b1..f89f83bf828 100644
--- a/net/unix/garbage.c
+++ b/net/unix/garbage.c
@@ -96,7 +96,7 @@ static DECLARE_WAIT_QUEUE_HEAD(unix_gc_wait);
 unsigned int unix_tot_inflight;
 
 
-static struct sock *unix_get_socket(struct file *filp)
+struct sock *unix_get_socket(struct file *filp)
 {
 	struct sock *u_sock = NULL;
 	struct inode *inode = filp->f_path.dentry->d_inode;
@@ -259,9 +259,16 @@ static void inc_inflight_move_tail(struct unix_sock *u)
 }
 
 static bool gc_in_progress = false;
+#define UNIX_INFLIGHT_TRIGGER_GC 16000
 
 void wait_for_unix_gc(void)
 {
+	/*
+	 * If number of inflight sockets is insane,
+	 * force a garbage collect right now.
+	 */
+	if (unix_tot_inflight > UNIX_INFLIGHT_TRIGGER_GC && !gc_in_progress)
+		unix_gc();
 	wait_event(unix_gc_wait, gc_in_progress == false);
 }
 
diff --git a/net/wanrouter/Makefile b/net/wanrouter/Makefile
index 9f188ab3dcd..4da14bc4807 100644
--- a/net/wanrouter/Makefile
+++ b/net/wanrouter/Makefile
@@ -4,4 +4,4 @@
 
 obj-$(CONFIG_WAN_ROUTER) += wanrouter.o
 
-wanrouter-objs :=  wanproc.o wanmain.o
+wanrouter-y :=  wanproc.o wanmain.o
diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index e77e508126f..55a28ab21db 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_WEXT_SPY) += wext-spy.o
 obj-$(CONFIG_WEXT_PRIV) += wext-priv.o
 
 cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o
-cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o
+cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o mesh.o
 cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
 cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o
 cfg80211-$(CONFIG_CFG80211_INTERNAL_REGDB) += regdb.o
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index d0c92dddb26..17cd0c04d13 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -44,6 +44,38 @@ rdev_freq_to_chan(struct cfg80211_registered_device *rdev,
 	return chan;
 }
 
+static bool can_beacon_sec_chan(struct wiphy *wiphy,
+				struct ieee80211_channel *chan,
+				enum nl80211_channel_type channel_type)
+{
+	struct ieee80211_channel *sec_chan;
+	int diff;
+
+	switch (channel_type) {
+	case NL80211_CHAN_HT40PLUS:
+		diff = 20;
+		break;
+	case NL80211_CHAN_HT40MINUS:
+		diff = -20;
+		break;
+	default:
+		return false;
+	}
+
+	sec_chan = ieee80211_get_channel(wiphy, chan->center_freq + diff);
+	if (!sec_chan)
+		return false;
+
+	/* we'll need a DFS capability later */
+	if (sec_chan->flags & (IEEE80211_CHAN_DISABLED |
+			       IEEE80211_CHAN_PASSIVE_SCAN |
+			       IEEE80211_CHAN_NO_IBSS |
+			       IEEE80211_CHAN_RADAR))
+		return false;
+
+	return true;
+}
+
 int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
 		      struct wireless_dev *wdev, int freq,
 		      enum nl80211_channel_type channel_type)
@@ -68,6 +100,28 @@ int cfg80211_set_freq(struct cfg80211_registered_device *rdev,
 	if (!chan)
 		return -EINVAL;
 
+	/* Both channels should be able to initiate communication */
+	if (wdev && (wdev->iftype == NL80211_IFTYPE_ADHOC ||
+		     wdev->iftype == NL80211_IFTYPE_AP ||
+		     wdev->iftype == NL80211_IFTYPE_AP_VLAN ||
+		     wdev->iftype == NL80211_IFTYPE_MESH_POINT ||
+		     wdev->iftype == NL80211_IFTYPE_P2P_GO)) {
+		switch (channel_type) {
+		case NL80211_CHAN_HT40PLUS:
+		case NL80211_CHAN_HT40MINUS:
+			if (!can_beacon_sec_chan(&rdev->wiphy, chan,
+						 channel_type)) {
+				printk(KERN_DEBUG
+				       "cfg80211: Secondary channel not "
+				       "allowed to initiate communication\n");
+				return -EINVAL;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+
 	result = rdev->ops->set_channel(&rdev->wiphy,
 					wdev ? wdev->netdev : NULL,
 					chan, channel_type);
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 9c21ebf9780..e9a5f8ca4c2 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -4,6 +4,8 @@
  * Copyright 2006-2010		Johannes Berg <johannes@sipsolutions.net>
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/if.h>
 #include <linux/module.h>
 #include <linux/err.h>
@@ -216,8 +218,7 @@ int cfg80211_dev_rename(struct cfg80211_registered_device *rdev,
 			    rdev->wiphy.debugfsdir,
 			    rdev->wiphy.debugfsdir->d_parent,
 			    newname))
-		printk(KERN_ERR "cfg80211: failed to rename debugfs dir to %s!\n",
-		       newname);
+		pr_err("failed to rename debugfs dir to %s!\n", newname);
 
 	nl80211_notify_dev_rename(rdev);
 
@@ -331,6 +332,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv)
 	WARN_ON(ops->add_virtual_intf && !ops->del_virtual_intf);
 	WARN_ON(ops->add_station && !ops->del_station);
 	WARN_ON(ops->add_mpath && !ops->del_mpath);
+	WARN_ON(ops->join_mesh && !ops->leave_mesh);
 
 	alloc_size = sizeof(*rdev) + sizeof_priv;
 
@@ -699,8 +701,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 
 		if (sysfs_create_link(&dev->dev.kobj, &rdev->wiphy.dev.kobj,
 				      "phy80211")) {
-			printk(KERN_ERR "wireless: failed to add phy80211 "
-				"symlink to netdev!\n");
+			pr_err("failed to add phy80211 symlink to netdev!\n");
 		}
 		wdev->netdev = dev;
 		wdev->sme_state = CFG80211_SME_IDLE;
@@ -752,6 +753,9 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 			cfg80211_mlme_down(rdev, dev);
 			wdev_unlock(wdev);
 			break;
+		case NL80211_IFTYPE_MESH_POINT:
+			cfg80211_leave_mesh(rdev, dev);
+			break;
 		default:
 			break;
 		}
@@ -775,20 +779,37 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 		}
 		cfg80211_lock_rdev(rdev);
 		mutex_lock(&rdev->devlist_mtx);
-#ifdef CONFIG_CFG80211_WEXT
 		wdev_lock(wdev);
 		switch (wdev->iftype) {
+#ifdef CONFIG_CFG80211_WEXT
 		case NL80211_IFTYPE_ADHOC:
 			cfg80211_ibss_wext_join(rdev, wdev);
 			break;
 		case NL80211_IFTYPE_STATION:
 			cfg80211_mgd_wext_connect(rdev, wdev);
 			break;
+#endif
+#ifdef CONFIG_MAC80211_MESH
+		case NL80211_IFTYPE_MESH_POINT:
+			{
+				/* backward compat code... */
+				struct mesh_setup setup;
+				memcpy(&setup, &default_mesh_setup,
+						sizeof(setup));
+				 /* back compat only needed for mesh_id */
+				setup.mesh_id = wdev->ssid;
+				setup.mesh_id_len = wdev->mesh_id_up_len;
+				if (wdev->mesh_id_up_len)
+					__cfg80211_join_mesh(rdev, dev,
+							&setup,
+							&default_mesh_config);
+				break;
+			}
+#endif
 		default:
 			break;
 		}
 		wdev_unlock(wdev);
-#endif
 		rdev->opencount++;
 		mutex_unlock(&rdev->devlist_mtx);
 		cfg80211_unlock_rdev(rdev);
diff --git a/net/wireless/core.h b/net/wireless/core.h
index 6583cca0e2e..26a0a084e16 100644
--- a/net/wireless/core.h
+++ b/net/wireless/core.h
@@ -285,6 +285,20 @@ void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid);
 int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
 			    struct wireless_dev *wdev);
 
+/* mesh */
+extern const struct mesh_config default_mesh_config;
+extern const struct mesh_setup default_mesh_setup;
+int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+			 struct net_device *dev,
+			 const struct mesh_setup *setup,
+			 const struct mesh_config *conf);
+int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+		       struct net_device *dev,
+		       const struct mesh_setup *setup,
+		       const struct mesh_config *conf);
+int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+			struct net_device *dev);
+
 /* MLME */
 int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev,
 			 struct net_device *dev,
@@ -341,9 +355,9 @@ void cfg80211_mlme_unregister_socket(struct wireless_dev *wdev, u32 nlpid);
 void cfg80211_mlme_purge_registrations(struct wireless_dev *wdev);
 int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
 			  struct net_device *dev,
-			  struct ieee80211_channel *chan,
+			  struct ieee80211_channel *chan, bool offchan,
 			  enum nl80211_channel_type channel_type,
-			  bool channel_type_valid,
+			  bool channel_type_valid, unsigned int wait,
 			  const u8 *buf, size_t len, u64 *cookie);
 
 /* SME */
diff --git a/net/wireless/lib80211.c b/net/wireless/lib80211.c
index 97d411f7450..3268fac5ab2 100644
--- a/net/wireless/lib80211.c
+++ b/net/wireless/lib80211.c
@@ -13,6 +13,8 @@
  *
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/ctype.h>
 #include <linux/ieee80211.h>
@@ -224,8 +226,8 @@ int lib80211_unregister_crypto_ops(struct lib80211_crypto_ops *ops)
 	return -EINVAL;
 
       found:
-	printk(KERN_DEBUG "lib80211_crypt: unregistered algorithm "
-	       "'%s'\n", ops->name);
+	printk(KERN_DEBUG "lib80211_crypt: unregistered algorithm '%s'\n",
+	       ops->name);
 	list_del(&alg->list);
 	spin_unlock_irqrestore(&lib80211_crypto_lock, flags);
 	kfree(alg);
@@ -270,7 +272,7 @@ static struct lib80211_crypto_ops lib80211_crypt_null = {
 
 static int __init lib80211_init(void)
 {
-	printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION "\n");
+	pr_info(DRV_DESCRIPTION "\n");
 	return lib80211_register_crypto_ops(&lib80211_crypt_null);
 }
 
diff --git a/net/wireless/lib80211_crypt_tkip.c b/net/wireless/lib80211_crypt_tkip.c
index 0fe40510e2c..7ea4f2b0770 100644
--- a/net/wireless/lib80211_crypt_tkip.c
+++ b/net/wireless/lib80211_crypt_tkip.c
@@ -10,6 +10,8 @@
  * more details.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -99,8 +101,7 @@ static void *lib80211_tkip_init(int key_idx)
 	priv->tx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
 						CRYPTO_ALG_ASYNC);
 	if (IS_ERR(priv->tx_tfm_arc4)) {
-		printk(KERN_DEBUG "lib80211_crypt_tkip: could not allocate "
-		       "crypto API arc4\n");
+		printk(KERN_DEBUG pr_fmt("could not allocate crypto API arc4\n"));
 		priv->tx_tfm_arc4 = NULL;
 		goto fail;
 	}
@@ -108,8 +109,7 @@ static void *lib80211_tkip_init(int key_idx)
 	priv->tx_tfm_michael = crypto_alloc_hash("michael_mic", 0,
 						 CRYPTO_ALG_ASYNC);
 	if (IS_ERR(priv->tx_tfm_michael)) {
-		printk(KERN_DEBUG "lib80211_crypt_tkip: could not allocate "
-		       "crypto API michael_mic\n");
+		printk(KERN_DEBUG pr_fmt("could not allocate crypto API michael_mic\n"));
 		priv->tx_tfm_michael = NULL;
 		goto fail;
 	}
@@ -117,8 +117,7 @@ static void *lib80211_tkip_init(int key_idx)
 	priv->rx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
 						CRYPTO_ALG_ASYNC);
 	if (IS_ERR(priv->rx_tfm_arc4)) {
-		printk(KERN_DEBUG "lib80211_crypt_tkip: could not allocate "
-		       "crypto API arc4\n");
+		printk(KERN_DEBUG pr_fmt("could not allocate crypto API arc4\n"));
 		priv->rx_tfm_arc4 = NULL;
 		goto fail;
 	}
@@ -126,8 +125,7 @@ static void *lib80211_tkip_init(int key_idx)
 	priv->rx_tfm_michael = crypto_alloc_hash("michael_mic", 0,
 						 CRYPTO_ALG_ASYNC);
 	if (IS_ERR(priv->rx_tfm_michael)) {
-		printk(KERN_DEBUG "lib80211_crypt_tkip: could not allocate "
-		       "crypto API michael_mic\n");
+		printk(KERN_DEBUG pr_fmt("could not allocate crypto API michael_mic\n"));
 		priv->rx_tfm_michael = NULL;
 		goto fail;
 	}
@@ -536,7 +534,7 @@ static int michael_mic(struct crypto_hash *tfm_michael, u8 * key, u8 * hdr,
 	struct scatterlist sg[2];
 
 	if (tfm_michael == NULL) {
-		printk(KERN_WARNING "michael_mic: tfm_michael == NULL\n");
+		pr_warn("%s(): tfm_michael == NULL\n", __func__);
 		return -1;
 	}
 	sg_init_table(sg, 2);
diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c
new file mode 100644
index 00000000000..73e39c171ff
--- /dev/null
+++ b/net/wireless/mesh.c
@@ -0,0 +1,142 @@
+#include <linux/ieee80211.h>
+#include <net/cfg80211.h>
+#include "core.h"
+
+/* Default values, timeouts in ms */
+#define MESH_TTL 		31
+#define MESH_DEFAULT_ELEMENT_TTL 31
+#define MESH_MAX_RETR	 	3
+#define MESH_RET_T 		100
+#define MESH_CONF_T 		100
+#define MESH_HOLD_T 		100
+
+#define MESH_PATH_TIMEOUT	5000
+
+/*
+ * Minimum interval between two consecutive PREQs originated by the same
+ * interface
+ */
+#define MESH_PREQ_MIN_INT	10
+#define MESH_DIAM_TRAVERSAL_TIME 50
+
+/*
+ * A path will be refreshed if it is used PATH_REFRESH_TIME milliseconds
+ * before timing out.  This way it will remain ACTIVE and no data frames
+ * will be unnecessarily held in the pending queue.
+ */
+#define MESH_PATH_REFRESH_TIME			1000
+#define MESH_MIN_DISCOVERY_TIMEOUT (2 * MESH_DIAM_TRAVERSAL_TIME)
+
+/* Default maximum number of established plinks per interface */
+#define MESH_MAX_ESTAB_PLINKS	32
+
+#define MESH_MAX_PREQ_RETRIES	4
+
+
+const struct mesh_config default_mesh_config = {
+	.dot11MeshRetryTimeout = MESH_RET_T,
+	.dot11MeshConfirmTimeout = MESH_CONF_T,
+	.dot11MeshHoldingTimeout = MESH_HOLD_T,
+	.dot11MeshMaxRetries = MESH_MAX_RETR,
+	.dot11MeshTTL = MESH_TTL,
+	.element_ttl = MESH_DEFAULT_ELEMENT_TTL,
+	.auto_open_plinks = true,
+	.dot11MeshMaxPeerLinks = MESH_MAX_ESTAB_PLINKS,
+	.dot11MeshHWMPactivePathTimeout = MESH_PATH_TIMEOUT,
+	.dot11MeshHWMPpreqMinInterval = MESH_PREQ_MIN_INT,
+	.dot11MeshHWMPnetDiameterTraversalTime = MESH_DIAM_TRAVERSAL_TIME,
+	.dot11MeshHWMPmaxPREQretries = MESH_MAX_PREQ_RETRIES,
+	.path_refresh_time = MESH_PATH_REFRESH_TIME,
+	.min_discovery_timeout = MESH_MIN_DISCOVERY_TIMEOUT,
+};
+
+const struct mesh_setup default_mesh_setup = {
+	.path_sel_proto = IEEE80211_PATH_PROTOCOL_HWMP,
+	.path_metric = IEEE80211_PATH_METRIC_AIRTIME,
+	.vendor_ie = NULL,
+	.vendor_ie_len = 0,
+};
+
+int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+			 struct net_device *dev,
+			 const struct mesh_setup *setup,
+			 const struct mesh_config *conf)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN);
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+		return -EOPNOTSUPP;
+
+	if (wdev->mesh_id_len)
+		return -EALREADY;
+
+	if (!setup->mesh_id_len)
+		return -EINVAL;
+
+	if (!rdev->ops->join_mesh)
+		return -EOPNOTSUPP;
+
+	err = rdev->ops->join_mesh(&rdev->wiphy, dev, conf, setup);
+	if (!err) {
+		memcpy(wdev->ssid, setup->mesh_id, setup->mesh_id_len);
+		wdev->mesh_id_len = setup->mesh_id_len;
+	}
+
+	return err;
+}
+
+int cfg80211_join_mesh(struct cfg80211_registered_device *rdev,
+		       struct net_device *dev,
+		       const struct mesh_setup *setup,
+		       const struct mesh_config *conf)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	wdev_lock(wdev);
+	err = __cfg80211_join_mesh(rdev, dev, setup, conf);
+	wdev_unlock(wdev);
+
+	return err;
+}
+
+static int __cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+				 struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT)
+		return -EOPNOTSUPP;
+
+	if (!rdev->ops->leave_mesh)
+		return -EOPNOTSUPP;
+
+	if (!wdev->mesh_id_len)
+		return -ENOTCONN;
+
+	err = rdev->ops->leave_mesh(&rdev->wiphy, dev);
+	if (!err)
+		wdev->mesh_id_len = 0;
+	return err;
+}
+
+int cfg80211_leave_mesh(struct cfg80211_registered_device *rdev,
+			struct net_device *dev)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	int err;
+
+	wdev_lock(wdev);
+	err = __cfg80211_leave_mesh(rdev, dev);
+	wdev_unlock(wdev);
+
+	return err;
+}
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 26838d903b9..aa5df8865ff 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -263,6 +263,28 @@ void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len)
 }
 EXPORT_SYMBOL(cfg80211_send_disassoc);
 
+void cfg80211_send_unprot_deauth(struct net_device *dev, const u8 *buf,
+				 size_t len)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct wiphy *wiphy = wdev->wiphy;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+	nl80211_send_unprot_deauth(rdev, dev, buf, len, GFP_ATOMIC);
+}
+EXPORT_SYMBOL(cfg80211_send_unprot_deauth);
+
+void cfg80211_send_unprot_disassoc(struct net_device *dev, const u8 *buf,
+				   size_t len)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct wiphy *wiphy = wdev->wiphy;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+	nl80211_send_unprot_disassoc(rdev, dev, buf, len, GFP_ATOMIC);
+}
+EXPORT_SYMBOL(cfg80211_send_unprot_disassoc);
+
 static void __cfg80211_auth_remove(struct wireless_dev *wdev, const u8 *addr)
 {
 	int i;
@@ -864,9 +886,9 @@ void cfg80211_mlme_purge_registrations(struct wireless_dev *wdev)
 
 int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
 			  struct net_device *dev,
-			  struct ieee80211_channel *chan,
+			  struct ieee80211_channel *chan, bool offchan,
 			  enum nl80211_channel_type channel_type,
-			  bool channel_type_valid,
+			  bool channel_type_valid, unsigned int wait,
 			  const u8 *buf, size_t len, u64 *cookie)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -946,8 +968,9 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev,
 		return -EINVAL;
 
 	/* Transmit the Action frame as requested by user space */
-	return rdev->ops->mgmt_tx(&rdev->wiphy, dev, chan, channel_type,
-				  channel_type_valid, buf, len, cookie);
+	return rdev->ops->mgmt_tx(&rdev->wiphy, dev, chan, offchan,
+				  channel_type, channel_type_valid,
+				  wait, buf, len, cookie);
 }
 
 bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf,
@@ -1028,3 +1051,15 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev,
 	nl80211_send_cqm_rssi_notify(rdev, dev, rssi_event, gfp);
 }
 EXPORT_SYMBOL(cfg80211_cqm_rssi_notify);
+
+void cfg80211_cqm_pktloss_notify(struct net_device *dev,
+				 const u8 *peer, u32 num_packets, gfp_t gfp)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct wiphy *wiphy = wdev->wiphy;
+	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+	/* Indicate roaming trigger event to user space */
+	nl80211_send_cqm_pktloss_notify(rdev, dev, peer, num_packets, gfp);
+}
+EXPORT_SYMBOL(cfg80211_cqm_pktloss_notify);
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index c506241f863..9b62710891a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -121,8 +121,9 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 },
 	[NL80211_ATTR_BSS_BASIC_RATES] = { .type = NLA_BINARY,
 					   .len = NL80211_MAX_SUPP_RATES },
+	[NL80211_ATTR_BSS_HT_OPMODE] = { .type = NLA_U16 },
 
-	[NL80211_ATTR_MESH_PARAMS] = { .type = NLA_NESTED },
+	[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
 
 	[NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
 					 .len = NL80211_HT_CAPABILITY_LEN },
@@ -163,10 +164,14 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_CQM] = { .type = NLA_NESTED, },
 	[NL80211_ATTR_LOCAL_STATE_CHANGE] = { .type = NLA_FLAG },
 	[NL80211_ATTR_AP_ISOLATE] = { .type = NLA_U8 },
-
 	[NL80211_ATTR_WIPHY_TX_POWER_SETTING] = { .type = NLA_U32 },
 	[NL80211_ATTR_WIPHY_TX_POWER_LEVEL] = { .type = NLA_U32 },
 	[NL80211_ATTR_FRAME_TYPE] = { .type = NLA_U16 },
+	[NL80211_ATTR_WIPHY_ANTENNA_TX] = { .type = NLA_U32 },
+	[NL80211_ATTR_WIPHY_ANTENNA_RX] = { .type = NLA_U32 },
+	[NL80211_ATTR_MCAST_RATE] = { .type = NLA_U32 },
+	[NL80211_ATTR_OFFCHANNEL_TX_OK] = { .type = NLA_FLAG },
+	[NL80211_ATTR_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
 };
 
 /* policy for the key attributes */
@@ -178,6 +183,14 @@ static const struct nla_policy nl80211_key_policy[NL80211_KEY_MAX + 1] = {
 	[NL80211_KEY_DEFAULT] = { .type = NLA_FLAG },
 	[NL80211_KEY_DEFAULT_MGMT] = { .type = NLA_FLAG },
 	[NL80211_KEY_TYPE] = { .type = NLA_U32 },
+	[NL80211_KEY_DEFAULT_TYPES] = { .type = NLA_NESTED },
+};
+
+/* policy for the key default flags */
+static const struct nla_policy
+nl80211_key_default_policy[NUM_NL80211_KEY_DEFAULT_TYPES] = {
+	[NL80211_KEY_DEFAULT_TYPE_UNICAST] = { .type = NLA_FLAG },
+	[NL80211_KEY_DEFAULT_TYPE_MULTICAST] = { .type = NLA_FLAG },
 };
 
 /* ifidx get helper */
@@ -224,8 +237,8 @@ static int nl80211_prepare_netdev_dump(struct sk_buff *skb,
 	}
 
 	*rdev = cfg80211_get_dev_from_ifindex(sock_net(skb->sk), ifidx);
-	if (IS_ERR(dev)) {
-		err = PTR_ERR(dev);
+	if (IS_ERR(*rdev)) {
+		err = PTR_ERR(*rdev);
 		goto out_rtnl;
 	}
 
@@ -310,6 +323,7 @@ struct key_parse {
 	int idx;
 	int type;
 	bool def, defmgmt;
+	bool def_uni, def_multi;
 };
 
 static int nl80211_parse_key_new(struct nlattr *key, struct key_parse *k)
@@ -323,6 +337,13 @@ static int nl80211_parse_key_new(struct nlattr *key, struct key_parse *k)
 	k->def = !!tb[NL80211_KEY_DEFAULT];
 	k->defmgmt = !!tb[NL80211_KEY_DEFAULT_MGMT];
 
+	if (k->def) {
+		k->def_uni = true;
+		k->def_multi = true;
+	}
+	if (k->defmgmt)
+		k->def_multi = true;
+
 	if (tb[NL80211_KEY_IDX])
 		k->idx = nla_get_u8(tb[NL80211_KEY_IDX]);
 
@@ -345,6 +366,19 @@ static int nl80211_parse_key_new(struct nlattr *key, struct key_parse *k)
 			return -EINVAL;
 	}
 
+	if (tb[NL80211_KEY_DEFAULT_TYPES]) {
+		struct nlattr *kdt[NUM_NL80211_KEY_DEFAULT_TYPES];
+		int err = nla_parse_nested(kdt,
+					   NUM_NL80211_KEY_DEFAULT_TYPES - 1,
+					   tb[NL80211_KEY_DEFAULT_TYPES],
+					   nl80211_key_default_policy);
+		if (err)
+			return err;
+
+		k->def_uni = kdt[NL80211_KEY_DEFAULT_TYPE_UNICAST];
+		k->def_multi = kdt[NL80211_KEY_DEFAULT_TYPE_MULTICAST];
+	}
+
 	return 0;
 }
 
@@ -369,12 +403,32 @@ static int nl80211_parse_key_old(struct genl_info *info, struct key_parse *k)
 	k->def = !!info->attrs[NL80211_ATTR_KEY_DEFAULT];
 	k->defmgmt = !!info->attrs[NL80211_ATTR_KEY_DEFAULT_MGMT];
 
+	if (k->def) {
+		k->def_uni = true;
+		k->def_multi = true;
+	}
+	if (k->defmgmt)
+		k->def_multi = true;
+
 	if (info->attrs[NL80211_ATTR_KEY_TYPE]) {
 		k->type = nla_get_u32(info->attrs[NL80211_ATTR_KEY_TYPE]);
 		if (k->type < 0 || k->type >= NUM_NL80211_KEYTYPES)
 			return -EINVAL;
 	}
 
+	if (info->attrs[NL80211_ATTR_KEY_DEFAULT_TYPES]) {
+		struct nlattr *kdt[NUM_NL80211_KEY_DEFAULT_TYPES];
+		int err = nla_parse_nested(
+				kdt, NUM_NL80211_KEY_DEFAULT_TYPES - 1,
+				info->attrs[NL80211_ATTR_KEY_DEFAULT_TYPES],
+				nl80211_key_default_policy);
+		if (err)
+			return err;
+
+		k->def_uni = kdt[NL80211_KEY_DEFAULT_TYPE_UNICAST];
+		k->def_multi = kdt[NL80211_KEY_DEFAULT_TYPE_MULTICAST];
+	}
+
 	return 0;
 }
 
@@ -397,6 +451,11 @@ static int nl80211_parse_key(struct genl_info *info, struct key_parse *k)
 	if (k->def && k->defmgmt)
 		return -EINVAL;
 
+	if (k->defmgmt) {
+		if (k->def_uni || !k->def_multi)
+			return -EINVAL;
+	}
+
 	if (k->idx != -1) {
 		if (k->defmgmt) {
 			if (k->idx < 4 || k->idx > 5)
@@ -446,6 +505,8 @@ nl80211_parse_connkeys(struct cfg80211_registered_device *rdev,
 				goto error;
 			def = 1;
 			result->def = parse.idx;
+			if (!parse.def_uni || !parse.def_multi)
+				goto error;
 		} else if (parse.defmgmt)
 			goto error;
 		err = cfg80211_validate_key_settings(rdev, &parse.p,
@@ -526,7 +587,6 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 		    dev->wiphy.rts_threshold);
 	NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS,
 		    dev->wiphy.coverage_class);
-
 	NLA_PUT_U8(msg, NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
 		   dev->wiphy.max_scan_ssids);
 	NLA_PUT_U16(msg, NL80211_ATTR_MAX_SCAN_IE_LEN,
@@ -545,6 +605,22 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	if (dev->wiphy.flags & WIPHY_FLAG_CONTROL_PORT_PROTOCOL)
 		NLA_PUT_FLAG(msg, NL80211_ATTR_CONTROL_PORT_ETHERTYPE);
 
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX,
+		    dev->wiphy.available_antennas_tx);
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
+		    dev->wiphy.available_antennas_rx);
+
+	if ((dev->wiphy.available_antennas_tx ||
+	     dev->wiphy.available_antennas_rx) && dev->ops->get_antenna) {
+		u32 tx_ant = 0, rx_ant = 0;
+		int res;
+		res = dev->ops->get_antenna(&dev->wiphy, &tx_ant, &rx_ant);
+		if (!res) {
+			NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_TX, tx_ant);
+			NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_RX, rx_ant);
+		}
+	}
+
 	nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
 	if (!nl_modes)
 		goto nla_put_failure;
@@ -649,19 +725,21 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	CMD(add_beacon, NEW_BEACON);
 	CMD(add_station, NEW_STATION);
 	CMD(add_mpath, NEW_MPATH);
-	CMD(set_mesh_params, SET_MESH_PARAMS);
+	CMD(update_mesh_config, SET_MESH_CONFIG);
 	CMD(change_bss, SET_BSS);
 	CMD(auth, AUTHENTICATE);
 	CMD(assoc, ASSOCIATE);
 	CMD(deauth, DEAUTHENTICATE);
 	CMD(disassoc, DISASSOCIATE);
 	CMD(join_ibss, JOIN_IBSS);
+	CMD(join_mesh, JOIN_MESH);
 	CMD(set_pmksa, SET_PMKSA);
 	CMD(del_pmksa, DEL_PMKSA);
 	CMD(flush_pmksa, FLUSH_PMKSA);
 	CMD(remain_on_channel, REMAIN_ON_CHANNEL);
 	CMD(set_bitrate_mask, SET_TX_BITRATE_MASK);
 	CMD(mgmt_tx, FRAME);
+	CMD(mgmt_tx_cancel_wait, FRAME_WAIT_CANCEL);
 	if (dev->wiphy.flags & WIPHY_FLAG_NETNS_OK) {
 		i++;
 		NLA_PUT_U32(msg, i, NL80211_CMD_SET_WIPHY_NETNS);
@@ -683,6 +761,14 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 
 	nla_nest_end(msg, nl_cmds);
 
+	if (dev->ops->remain_on_channel)
+		NLA_PUT_U32(msg, NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
+			    dev->wiphy.max_remain_on_channel_duration);
+
+	/* for now at least assume all drivers have it */
+	if (dev->ops->mgmt_tx)
+		NLA_PUT_FLAG(msg, NL80211_ATTR_OFFCHANNEL_TX_OK);
+
 	if (mgmt_stypes) {
 		u16 stypes;
 		struct nlattr *nl_ftypes, *nl_ifs;
@@ -1024,6 +1110,35 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
 			goto bad_res;
 	}
 
+	if (info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX] &&
+	    info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]) {
+		u32 tx_ant, rx_ant;
+		if ((!rdev->wiphy.available_antennas_tx &&
+		     !rdev->wiphy.available_antennas_rx) ||
+		    !rdev->ops->set_antenna) {
+			result = -EOPNOTSUPP;
+			goto bad_res;
+		}
+
+		tx_ant = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_ANTENNA_TX]);
+		rx_ant = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_ANTENNA_RX]);
+
+		/* reject antenna configurations which don't match the
+		 * available antenna masks, except for the "all" mask */
+		if ((~tx_ant && (tx_ant & ~rdev->wiphy.available_antennas_tx)) ||
+		    (~rx_ant && (rx_ant & ~rdev->wiphy.available_antennas_rx))) {
+			result = -EINVAL;
+			goto bad_res;
+		}
+
+		tx_ant = tx_ant & rdev->wiphy.available_antennas_tx;
+		rx_ant = rx_ant & rdev->wiphy.available_antennas_rx;
+
+		result = rdev->ops->set_antenna(&rdev->wiphy, tx_ant, rx_ant);
+		if (result)
+			goto bad_res;
+	}
+
 	changed = 0;
 
 	if (info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]) {
@@ -1291,11 +1406,21 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 	}
 
 	if (info->attrs[NL80211_ATTR_MESH_ID]) {
+		struct wireless_dev *wdev = dev->ieee80211_ptr;
+
 		if (ntype != NL80211_IFTYPE_MESH_POINT)
 			return -EINVAL;
-		params.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]);
-		params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
-		change = true;
+		if (netif_running(dev))
+			return -EBUSY;
+
+		wdev_lock(wdev);
+		BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN !=
+			     IEEE80211_MAX_MESH_ID_LEN);
+		wdev->mesh_id_up_len =
+			nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
+		memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
+		       wdev->mesh_id_up_len);
+		wdev_unlock(wdev);
 	}
 
 	if (info->attrs[NL80211_ATTR_4ADDR]) {
@@ -1335,6 +1460,7 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
 	struct vif_params params;
+	struct net_device *dev;
 	int err;
 	enum nl80211_iftype type = NL80211_IFTYPE_UNSPECIFIED;
 	u32 flags;
@@ -1354,12 +1480,6 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
 	    !(rdev->wiphy.interface_modes & (1 << type)))
 		return -EOPNOTSUPP;
 
-	if (type == NL80211_IFTYPE_MESH_POINT &&
-	    info->attrs[NL80211_ATTR_MESH_ID]) {
-		params.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]);
-		params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
-	}
-
 	if (info->attrs[NL80211_ATTR_4ADDR]) {
 		params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]);
 		err = nl80211_valid_4addr(rdev, NULL, params.use_4addr, type);
@@ -1370,11 +1490,27 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
 	err = parse_monitor_flags(type == NL80211_IFTYPE_MONITOR ?
 				  info->attrs[NL80211_ATTR_MNTR_FLAGS] : NULL,
 				  &flags);
-	err = rdev->ops->add_virtual_intf(&rdev->wiphy,
+	dev = rdev->ops->add_virtual_intf(&rdev->wiphy,
 		nla_data(info->attrs[NL80211_ATTR_IFNAME]),
 		type, err ? NULL : &flags, &params);
+	if (IS_ERR(dev))
+		return PTR_ERR(dev);
 
-	return err;
+	if (type == NL80211_IFTYPE_MESH_POINT &&
+	    info->attrs[NL80211_ATTR_MESH_ID]) {
+		struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+		wdev_lock(wdev);
+		BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN !=
+			     IEEE80211_MAX_MESH_ID_LEN);
+		wdev->mesh_id_up_len =
+			nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
+		memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]),
+		       wdev->mesh_id_up_len);
+		wdev_unlock(wdev);
+	}
+
+	return 0;
 }
 
 static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
@@ -1519,8 +1655,6 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 	struct key_parse key;
 	int err;
 	struct net_device *dev = info->user_ptr[1];
-	int (*func)(struct wiphy *wiphy, struct net_device *netdev,
-		    u8 key_index);
 
 	err = nl80211_parse_key(info, &key);
 	if (err)
@@ -1533,27 +1667,61 @@ static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
 	if (!key.def && !key.defmgmt)
 		return -EINVAL;
 
-	if (key.def)
-		func = rdev->ops->set_default_key;
-	else
-		func = rdev->ops->set_default_mgmt_key;
+	wdev_lock(dev->ieee80211_ptr);
 
-	if (!func)
-		return -EOPNOTSUPP;
+	if (key.def) {
+		if (!rdev->ops->set_default_key) {
+			err = -EOPNOTSUPP;
+			goto out;
+		}
 
-	wdev_lock(dev->ieee80211_ptr);
-	err = nl80211_key_allowed(dev->ieee80211_ptr);
-	if (!err)
-		err = func(&rdev->wiphy, dev, key.idx);
+		err = nl80211_key_allowed(dev->ieee80211_ptr);
+		if (err)
+			goto out;
+
+		if (!(rdev->wiphy.flags &
+				WIPHY_FLAG_SUPPORTS_SEPARATE_DEFAULT_KEYS)) {
+			if (!key.def_uni || !key.def_multi) {
+				err = -EOPNOTSUPP;
+				goto out;
+			}
+		}
+
+		err = rdev->ops->set_default_key(&rdev->wiphy, dev, key.idx,
+						 key.def_uni, key.def_multi);
+
+		if (err)
+			goto out;
 
 #ifdef CONFIG_CFG80211_WEXT
-	if (!err) {
-		if (func == rdev->ops->set_default_key)
-			dev->ieee80211_ptr->wext.default_key = key.idx;
-		else
-			dev->ieee80211_ptr->wext.default_mgmt_key = key.idx;
-	}
+		dev->ieee80211_ptr->wext.default_key = key.idx;
 #endif
+	} else {
+		if (key.def_uni || !key.def_multi) {
+			err = -EINVAL;
+			goto out;
+		}
+
+		if (!rdev->ops->set_default_mgmt_key) {
+			err = -EOPNOTSUPP;
+			goto out;
+		}
+
+		err = nl80211_key_allowed(dev->ieee80211_ptr);
+		if (err)
+			goto out;
+
+		err = rdev->ops->set_default_mgmt_key(&rdev->wiphy,
+						      dev, key.idx);
+		if (err)
+			goto out;
+
+#ifdef CONFIG_CFG80211_WEXT
+		dev->ieee80211_ptr->wext.default_mgmt_key = key.idx;
+#endif
+	}
+
+ out:
 	wdev_unlock(dev->ieee80211_ptr);
 
 	return err;
@@ -1841,6 +2009,9 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
 	if (sinfo->filled & STATION_INFO_SIGNAL)
 		NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL,
 			   sinfo->signal);
+	if (sinfo->filled & STATION_INFO_SIGNAL_AVG)
+		NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL_AVG,
+			   sinfo->signal_avg);
 	if (sinfo->filled & STATION_INFO_TX_BITRATE) {
 		txrate = nla_nest_start(msg, NL80211_STA_INFO_TX_BITRATE);
 		if (!txrate)
@@ -2404,6 +2575,7 @@ static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info)
 	params.use_short_preamble = -1;
 	params.use_short_slot_time = -1;
 	params.ap_isolate = -1;
+	params.ht_opmode = -1;
 
 	if (info->attrs[NL80211_ATTR_BSS_CTS_PROT])
 		params.use_cts_prot =
@@ -2422,6 +2594,9 @@ static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info)
 	}
 	if (info->attrs[NL80211_ATTR_AP_ISOLATE])
 		params.ap_isolate = !!nla_get_u8(info->attrs[NL80211_ATTR_AP_ISOLATE]);
+	if (info->attrs[NL80211_ATTR_BSS_HT_OPMODE])
+		params.ht_opmode =
+			nla_get_u16(info->attrs[NL80211_ATTR_BSS_HT_OPMODE]);
 
 	if (!rdev->ops->change_bss)
 		return -EOPNOTSUPP;
@@ -2506,22 +2681,33 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
 	return r;
 }
 
-static int nl80211_get_mesh_params(struct sk_buff *skb,
-	struct genl_info *info)
+static int nl80211_get_mesh_config(struct sk_buff *skb,
+				   struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
-	struct mesh_config cur_params;
-	int err;
 	struct net_device *dev = info->user_ptr[1];
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct mesh_config cur_params;
+	int err = 0;
 	void *hdr;
 	struct nlattr *pinfoattr;
 	struct sk_buff *msg;
 
-	if (!rdev->ops->get_mesh_params)
+	if (wdev->iftype != NL80211_IFTYPE_MESH_POINT)
+		return -EOPNOTSUPP;
+
+	if (!rdev->ops->get_mesh_config)
 		return -EOPNOTSUPP;
 
-	/* Get the mesh params */
-	err = rdev->ops->get_mesh_params(&rdev->wiphy, dev, &cur_params);
+	wdev_lock(wdev);
+	/* If not connected, get default parameters */
+	if (!wdev->mesh_id_len)
+		memcpy(&cur_params, &default_mesh_config, sizeof(cur_params));
+	else
+		err = rdev->ops->get_mesh_config(&rdev->wiphy, dev,
+						 &cur_params);
+	wdev_unlock(wdev);
+
 	if (err)
 		return err;
 
@@ -2530,10 +2716,10 @@ static int nl80211_get_mesh_params(struct sk_buff *skb,
 	if (!msg)
 		return -ENOMEM;
 	hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
-			     NL80211_CMD_GET_MESH_PARAMS);
+			     NL80211_CMD_GET_MESH_CONFIG);
 	if (!hdr)
 		goto nla_put_failure;
-	pinfoattr = nla_nest_start(msg, NL80211_ATTR_MESH_PARAMS);
+	pinfoattr = nla_nest_start(msg, NL80211_ATTR_MESH_CONFIG);
 	if (!pinfoattr)
 		goto nla_put_failure;
 	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
@@ -2549,6 +2735,8 @@ static int nl80211_get_mesh_params(struct sk_buff *skb,
 			cur_params.dot11MeshMaxRetries);
 	NLA_PUT_U8(msg, NL80211_MESHCONF_TTL,
 			cur_params.dot11MeshTTL);
+	NLA_PUT_U8(msg, NL80211_MESHCONF_ELEMENT_TTL,
+			cur_params.element_ttl);
 	NLA_PUT_U8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
 			cur_params.auto_open_plinks);
 	NLA_PUT_U8(msg, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
@@ -2575,14 +2763,6 @@ static int nl80211_get_mesh_params(struct sk_buff *skb,
 	return -ENOBUFS;
 }
 
-#define FILL_IN_MESH_PARAM_IF_SET(table, cfg, param, mask, attr_num, nla_fn) \
-do {\
-	if (table[attr_num]) {\
-		cfg.param = nla_fn(table[attr_num]); \
-		mask |= (1 << (attr_num - 1)); \
-	} \
-} while (0);\
-
 static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX+1] = {
 	[NL80211_MESHCONF_RETRY_TIMEOUT] = { .type = NLA_U16 },
 	[NL80211_MESHCONF_CONFIRM_TIMEOUT] = { .type = NLA_U16 },
@@ -2590,6 +2770,7 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 	[NL80211_MESHCONF_MAX_PEER_LINKS] = { .type = NLA_U16 },
 	[NL80211_MESHCONF_MAX_RETRIES] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_TTL] = { .type = NLA_U8 },
+	[NL80211_MESHCONF_ELEMENT_TTL] = { .type = NLA_U8 },
 	[NL80211_MESHCONF_AUTO_OPEN_PLINKS] = { .type = NLA_U8 },
 
 	[NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES] = { .type = NLA_U8 },
@@ -2600,31 +2781,42 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A
 	[NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME] = { .type = NLA_U16 },
 };
 
-static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
+static const struct nla_policy
+	nl80211_mesh_setup_params_policy[NL80211_MESH_SETUP_ATTR_MAX+1] = {
+	[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL] = { .type = NLA_U8 },
+	[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 },
+	[NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE] = { .type = NLA_BINARY,
+		.len = IEEE80211_MAX_DATA_LEN },
+};
+
+static int nl80211_parse_mesh_config(struct genl_info *info,
+				     struct mesh_config *cfg,
+				     u32 *mask_out)
 {
-	u32 mask;
-	struct cfg80211_registered_device *rdev = info->user_ptr[0];
-	struct net_device *dev = info->user_ptr[1];
-	struct mesh_config cfg;
 	struct nlattr *tb[NL80211_MESHCONF_ATTR_MAX + 1];
-	struct nlattr *parent_attr;
+	u32 mask = 0;
+
+#define FILL_IN_MESH_PARAM_IF_SET(table, cfg, param, mask, attr_num, nla_fn) \
+do {\
+	if (table[attr_num]) {\
+		cfg->param = nla_fn(table[attr_num]); \
+		mask |= (1 << (attr_num - 1)); \
+	} \
+} while (0);\
+
 
-	parent_attr = info->attrs[NL80211_ATTR_MESH_PARAMS];
-	if (!parent_attr)
+	if (!info->attrs[NL80211_ATTR_MESH_CONFIG])
 		return -EINVAL;
 	if (nla_parse_nested(tb, NL80211_MESHCONF_ATTR_MAX,
-			parent_attr, nl80211_meshconf_params_policy))
+			     info->attrs[NL80211_ATTR_MESH_CONFIG],
+			     nl80211_meshconf_params_policy))
 		return -EINVAL;
 
-	if (!rdev->ops->set_mesh_params)
-		return -EOPNOTSUPP;
-
 	/* This makes sure that there aren't more than 32 mesh config
 	 * parameters (otherwise our bitfield scheme would not work.) */
 	BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);
 
 	/* Fill in the params struct */
-	mask = 0;
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout,
 			mask, NL80211_MESHCONF_RETRY_TIMEOUT, nla_get_u16);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout,
@@ -2637,6 +2829,8 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
 			mask, NL80211_MESHCONF_MAX_RETRIES, nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL,
 			mask, NL80211_MESHCONF_TTL, nla_get_u8);
+	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, element_ttl,
+			mask, NL80211_MESHCONF_ELEMENT_TTL, nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks,
 			mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, nla_get_u8);
 	FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries,
@@ -2661,12 +2855,82 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
 			dot11MeshHWMPRootMode, mask,
 			NL80211_MESHCONF_HWMP_ROOTMODE,
 			nla_get_u8);
+	if (mask_out)
+		*mask_out = mask;
 
-	/* Apply changes */
-	return rdev->ops->set_mesh_params(&rdev->wiphy, dev, &cfg, mask);
-}
+	return 0;
 
 #undef FILL_IN_MESH_PARAM_IF_SET
+}
+
+static int nl80211_parse_mesh_setup(struct genl_info *info,
+				     struct mesh_setup *setup)
+{
+	struct nlattr *tb[NL80211_MESH_SETUP_ATTR_MAX + 1];
+
+	if (!info->attrs[NL80211_ATTR_MESH_SETUP])
+		return -EINVAL;
+	if (nla_parse_nested(tb, NL80211_MESH_SETUP_ATTR_MAX,
+			     info->attrs[NL80211_ATTR_MESH_SETUP],
+			     nl80211_mesh_setup_params_policy))
+		return -EINVAL;
+
+	if (tb[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL])
+		setup->path_sel_proto =
+		(nla_get_u8(tb[NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL])) ?
+		 IEEE80211_PATH_PROTOCOL_VENDOR :
+		 IEEE80211_PATH_PROTOCOL_HWMP;
+
+	if (tb[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC])
+		setup->path_metric =
+		(nla_get_u8(tb[NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC])) ?
+		 IEEE80211_PATH_METRIC_VENDOR :
+		 IEEE80211_PATH_METRIC_AIRTIME;
+
+	if (tb[NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE]) {
+		struct nlattr *ieattr =
+			tb[NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE];
+		if (!is_valid_ie_attr(ieattr))
+			return -EINVAL;
+		setup->vendor_ie = nla_data(ieattr);
+		setup->vendor_ie_len = nla_len(ieattr);
+	}
+
+	return 0;
+}
+
+static int nl80211_update_mesh_config(struct sk_buff *skb,
+				      struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+	struct mesh_config cfg;
+	u32 mask;
+	int err;
+
+	if (wdev->iftype != NL80211_IFTYPE_MESH_POINT)
+		return -EOPNOTSUPP;
+
+	if (!rdev->ops->update_mesh_config)
+		return -EOPNOTSUPP;
+
+	err = nl80211_parse_mesh_config(info, &cfg, &mask);
+	if (err)
+		return err;
+
+	wdev_lock(wdev);
+	if (!wdev->mesh_id_len)
+		err = -ENOLINK;
+
+	if (!err)
+		err = rdev->ops->update_mesh_config(&rdev->wiphy, dev,
+						    mask, &cfg);
+
+	wdev_unlock(wdev);
+
+	return err;
+}
 
 static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info)
 {
@@ -3569,6 +3833,34 @@ static int nl80211_disassociate(struct sk_buff *skb, struct genl_info *info)
 				      local_state_change);
 }
 
+static bool
+nl80211_parse_mcast_rate(struct cfg80211_registered_device *rdev,
+			 int mcast_rate[IEEE80211_NUM_BANDS],
+			 int rateval)
+{
+	struct wiphy *wiphy = &rdev->wiphy;
+	bool found = false;
+	int band, i;
+
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		struct ieee80211_supported_band *sband;
+
+		sband = wiphy->bands[band];
+		if (!sband)
+			continue;
+
+		for (i = 0; i < sband->n_bitrates; i++) {
+			if (sband->bitrates[i].bitrate == rateval) {
+				mcast_rate[band] = i + 1;
+				found = true;
+				break;
+			}
+		}
+	}
+
+	return found;
+}
+
 static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -3653,6 +3945,11 @@ static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
 		}
 	}
 
+	if (info->attrs[NL80211_ATTR_MCAST_RATE] &&
+	    !nl80211_parse_mcast_rate(rdev, ibss.mcast_rate,
+			nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE])))
+		return -EINVAL;
+
 	if (ibss.privacy && info->attrs[NL80211_ATTR_KEYS]) {
 		connkeys = nl80211_parse_connkeys(rdev,
 					info->attrs[NL80211_ATTR_KEYS]);
@@ -3987,7 +4284,8 @@ static int nl80211_remain_on_channel(struct sk_buff *skb,
 	 * We should be on that channel for at least one jiffie,
 	 * and more than 5 seconds seems excessive.
 	 */
-	if (!duration || !msecs_to_jiffies(duration) || duration > 5000)
+	if (!duration || !msecs_to_jiffies(duration) ||
+	    duration > rdev->wiphy.max_remain_on_channel_duration)
 		return -EINVAL;
 
 	if (!rdev->ops->remain_on_channel)
@@ -4155,6 +4453,7 @@ static int nl80211_register_mgmt(struct sk_buff *skb, struct genl_info *info)
 	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT &&
 	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
 	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT &&
 	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
 		return -EOPNOTSUPP;
 
@@ -4180,6 +4479,8 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
 	void *hdr;
 	u64 cookie;
 	struct sk_buff *msg;
+	unsigned int wait = 0;
+	bool offchan;
 
 	if (!info->attrs[NL80211_ATTR_FRAME] ||
 	    !info->attrs[NL80211_ATTR_WIPHY_FREQ])
@@ -4193,9 +4494,16 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
 	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT &&
 	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
 	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT &&
 	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
 		return -EOPNOTSUPP;
 
+	if (info->attrs[NL80211_ATTR_DURATION]) {
+		if (!rdev->ops->mgmt_tx_cancel_wait)
+			return -EINVAL;
+		wait = nla_get_u32(info->attrs[NL80211_ATTR_DURATION]);
+	}
+
 	if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
 		channel_type = nla_get_u32(
 			info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
@@ -4207,6 +4515,8 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
 		channel_type_valid = true;
 	}
 
+	offchan = info->attrs[NL80211_ATTR_OFFCHANNEL_TX_OK];
+
 	freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
 	chan = rdev_freq_to_chan(rdev, freq, channel_type);
 	if (chan == NULL)
@@ -4223,8 +4533,8 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
 		err = PTR_ERR(hdr);
 		goto free_msg;
 	}
-	err = cfg80211_mlme_mgmt_tx(rdev, dev, chan, channel_type,
-				    channel_type_valid,
+	err = cfg80211_mlme_mgmt_tx(rdev, dev, chan, offchan, channel_type,
+				    channel_type_valid, wait,
 				    nla_data(info->attrs[NL80211_ATTR_FRAME]),
 				    nla_len(info->attrs[NL80211_ATTR_FRAME]),
 				    &cookie);
@@ -4243,6 +4553,31 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
 	return err;
 }
 
+static int nl80211_tx_mgmt_cancel_wait(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+	u64 cookie;
+
+	if (!info->attrs[NL80211_ATTR_COOKIE])
+		return -EINVAL;
+
+	if (!rdev->ops->mgmt_tx_cancel_wait)
+		return -EOPNOTSUPP;
+
+	if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_CLIENT &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
+	    dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO)
+		return -EOPNOTSUPP;
+
+	cookie = nla_get_u64(info->attrs[NL80211_ATTR_COOKIE]);
+
+	return rdev->ops->mgmt_tx_cancel_wait(&rdev->wiphy, dev, cookie);
+}
+
 static int nl80211_set_power_save(struct sk_buff *skb, struct genl_info *info)
 {
 	struct cfg80211_registered_device *rdev = info->user_ptr[0];
@@ -4381,6 +4716,50 @@ out:
 	return err;
 }
 
+static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+	struct mesh_config cfg;
+	struct mesh_setup setup;
+	int err;
+
+	/* start with default */
+	memcpy(&cfg, &default_mesh_config, sizeof(cfg));
+	memcpy(&setup, &default_mesh_setup, sizeof(setup));
+
+	if (info->attrs[NL80211_ATTR_MESH_CONFIG]) {
+		/* and parse parameters if given */
+		err = nl80211_parse_mesh_config(info, &cfg, NULL);
+		if (err)
+			return err;
+	}
+
+	if (!info->attrs[NL80211_ATTR_MESH_ID] ||
+	    !nla_len(info->attrs[NL80211_ATTR_MESH_ID]))
+		return -EINVAL;
+
+	setup.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]);
+	setup.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
+
+	if (info->attrs[NL80211_ATTR_MESH_SETUP]) {
+		/* parse additional setup parameters if given */
+		err = nl80211_parse_mesh_setup(info, &setup);
+		if (err)
+			return err;
+	}
+
+	return cfg80211_join_mesh(rdev, dev, &setup, &cfg);
+}
+
+static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info)
+{
+	struct cfg80211_registered_device *rdev = info->user_ptr[0];
+	struct net_device *dev = info->user_ptr[1];
+
+	return cfg80211_leave_mesh(rdev, dev);
+}
+
 #define NL80211_FLAG_NEED_WIPHY		0x01
 #define NL80211_FLAG_NEED_NETDEV	0x02
 #define NL80211_FLAG_NEED_RTNL		0x04
@@ -4636,19 +5015,19 @@ static struct genl_ops nl80211_ops[] = {
 		.flags = GENL_ADMIN_PERM,
 	},
 	{
-		.cmd = NL80211_CMD_GET_MESH_PARAMS,
-		.doit = nl80211_get_mesh_params,
+		.cmd = NL80211_CMD_GET_MESH_CONFIG,
+		.doit = nl80211_get_mesh_config,
 		.policy = nl80211_policy,
 		/* can be retrieved by unprivileged users */
 		.internal_flags = NL80211_FLAG_NEED_NETDEV |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
-		.cmd = NL80211_CMD_SET_MESH_PARAMS,
-		.doit = nl80211_set_mesh_params,
+		.cmd = NL80211_CMD_SET_MESH_CONFIG,
+		.doit = nl80211_update_mesh_config,
 		.policy = nl80211_policy,
 		.flags = GENL_ADMIN_PERM,
-		.internal_flags = NL80211_FLAG_NEED_NETDEV |
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
@@ -4816,6 +5195,14 @@ static struct genl_ops nl80211_ops[] = {
 				  NL80211_FLAG_NEED_RTNL,
 	},
 	{
+		.cmd = NL80211_CMD_FRAME_WAIT_CANCEL,
+		.doit = nl80211_tx_mgmt_cancel_wait,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
+	{
 		.cmd = NL80211_CMD_SET_POWER_SAVE,
 		.doit = nl80211_set_power_save,
 		.policy = nl80211_policy,
@@ -4855,6 +5242,22 @@ static struct genl_ops nl80211_ops[] = {
 		.internal_flags = NL80211_FLAG_NEED_NETDEV |
 				  NL80211_FLAG_NEED_RTNL,
 	},
+	{
+		.cmd = NL80211_CMD_JOIN_MESH,
+		.doit = nl80211_join_mesh,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
+	{
+		.cmd = NL80211_CMD_LEAVE_MESH,
+		.doit = nl80211_leave_mesh,
+		.policy = nl80211_policy,
+		.flags = GENL_ADMIN_PERM,
+		.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
+				  NL80211_FLAG_NEED_RTNL,
+	},
 };
 
 static struct genl_multicast_group nl80211_mlme_mcgrp = {
@@ -5133,6 +5536,22 @@ void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
 				NL80211_CMD_DISASSOCIATE, gfp);
 }
 
+void nl80211_send_unprot_deauth(struct cfg80211_registered_device *rdev,
+				struct net_device *netdev, const u8 *buf,
+				size_t len, gfp_t gfp)
+{
+	nl80211_send_mlme_event(rdev, netdev, buf, len,
+				NL80211_CMD_UNPROT_DEAUTHENTICATE, gfp);
+}
+
+void nl80211_send_unprot_disassoc(struct cfg80211_registered_device *rdev,
+				  struct net_device *netdev, const u8 *buf,
+				  size_t len, gfp_t gfp)
+{
+	nl80211_send_mlme_event(rdev, netdev, buf, len,
+				NL80211_CMD_UNPROT_DISASSOCIATE, gfp);
+}
+
 static void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev,
 				      struct net_device *netdev, int cmd,
 				      const u8 *addr, gfp_t gfp)
@@ -5651,6 +6070,51 @@ nl80211_send_cqm_rssi_notify(struct cfg80211_registered_device *rdev,
 	nlmsg_free(msg);
 }
 
+void
+nl80211_send_cqm_pktloss_notify(struct cfg80211_registered_device *rdev,
+				struct net_device *netdev, const u8 *peer,
+				u32 num_packets, gfp_t gfp)
+{
+	struct sk_buff *msg;
+	struct nlattr *pinfoattr;
+	void *hdr;
+
+	msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
+	if (!msg)
+		return;
+
+	hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_NOTIFY_CQM);
+	if (!hdr) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
+	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
+	NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, peer);
+
+	pinfoattr = nla_nest_start(msg, NL80211_ATTR_CQM);
+	if (!pinfoattr)
+		goto nla_put_failure;
+
+	NLA_PUT_U32(msg, NL80211_ATTR_CQM_PKT_LOSS_EVENT, num_packets);
+
+	nla_nest_end(msg, pinfoattr);
+
+	if (genlmsg_end(msg, hdr) < 0) {
+		nlmsg_free(msg);
+		return;
+	}
+
+	genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0,
+				nl80211_mlme_mcgrp.id, gfp);
+	return;
+
+ nla_put_failure:
+	genlmsg_cancel(msg, hdr);
+	nlmsg_free(msg);
+}
+
 static int nl80211_netlink_notify(struct notifier_block * nb,
 				  unsigned long state,
 				  void *_notify)
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index 30d2f939150..e3f7fa88696 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -25,6 +25,12 @@ void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
 void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
 			   struct net_device *netdev,
 			   const u8 *buf, size_t len, gfp_t gfp);
+void nl80211_send_unprot_deauth(struct cfg80211_registered_device *rdev,
+				struct net_device *netdev,
+				const u8 *buf, size_t len, gfp_t gfp);
+void nl80211_send_unprot_disassoc(struct cfg80211_registered_device *rdev,
+				  struct net_device *netdev,
+				  const u8 *buf, size_t len, gfp_t gfp);
 void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
 			       struct net_device *netdev,
 			       const u8 *addr, gfp_t gfp);
@@ -87,5 +93,9 @@ nl80211_send_cqm_rssi_notify(struct cfg80211_registered_device *rdev,
 			     struct net_device *netdev,
 			     enum nl80211_cqm_rssi_threshold_event rssi_event,
 			     gfp_t gfp);
+void
+nl80211_send_cqm_pktloss_notify(struct cfg80211_registered_device *rdev,
+				struct net_device *netdev, const u8 *peer,
+				u32 num_packets, gfp_t gfp);
 
 #endif /* __NET_WIRELESS_NL80211_H */
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 4b9f8912526..37693b6ef23 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -32,6 +32,9 @@
  * rely on some SHA1 checksum of the regdomain for example.
  *
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/list.h>
@@ -48,7 +51,7 @@
 #ifdef CONFIG_CFG80211_REG_DEBUG
 #define REG_DBG_PRINT(format, args...) \
 	do { \
-		printk(KERN_DEBUG format , ## args); \
+		printk(KERN_DEBUG pr_fmt(format), ##args);	\
 	} while (0)
 #else
 #define REG_DBG_PRINT(args...)
@@ -96,6 +99,9 @@ struct reg_beacon {
 	struct ieee80211_channel chan;
 };
 
+static void reg_todo(struct work_struct *work);
+static DECLARE_WORK(reg_work, reg_todo);
+
 /* We keep a static world regulatory domain in case of the absence of CRDA */
 static const struct ieee80211_regdomain world_regdom = {
 	.n_reg_rules = 5,
@@ -367,11 +373,10 @@ static int call_crda(const char *alpha2)
 	};
 
 	if (!is_world_regdom((char *) alpha2))
-		printk(KERN_INFO "cfg80211: Calling CRDA for country: %c%c\n",
+		pr_info("Calling CRDA for country: %c%c\n",
 			alpha2[0], alpha2[1]);
 	else
-		printk(KERN_INFO "cfg80211: Calling CRDA to update world "
-			"regulatory domain\n");
+		pr_info("Calling CRDA to update world regulatory domain\n");
 
 	/* query internal regulatory database (if it exists) */
 	reg_regdb_query(alpha2);
@@ -656,7 +661,8 @@ static int freq_reg_info_regd(struct wiphy *wiphy,
 	 * Follow the driver's regulatory domain, if present, unless a country
 	 * IE has been processed or a user wants to help complaince further
 	 */
-	if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
+	if (!custom_regd &&
+	    last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
 	    last_request->initiator != NL80211_REGDOM_SET_BY_USER &&
 	    wiphy->regd)
 		regd = wiphy->regd;
@@ -711,6 +717,60 @@ int freq_reg_info(struct wiphy *wiphy,
 }
 EXPORT_SYMBOL(freq_reg_info);
 
+#ifdef CONFIG_CFG80211_REG_DEBUG
+static const char *reg_initiator_name(enum nl80211_reg_initiator initiator)
+{
+	switch (initiator) {
+	case NL80211_REGDOM_SET_BY_CORE:
+		return "Set by core";
+	case NL80211_REGDOM_SET_BY_USER:
+		return "Set by user";
+	case NL80211_REGDOM_SET_BY_DRIVER:
+		return "Set by driver";
+	case NL80211_REGDOM_SET_BY_COUNTRY_IE:
+		return "Set by country IE";
+	default:
+		WARN_ON(1);
+		return "Set by bug";
+	}
+}
+
+static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan,
+				    u32 desired_bw_khz,
+				    const struct ieee80211_reg_rule *reg_rule)
+{
+	const struct ieee80211_power_rule *power_rule;
+	const struct ieee80211_freq_range *freq_range;
+	char max_antenna_gain[32];
+
+	power_rule = &reg_rule->power_rule;
+	freq_range = &reg_rule->freq_range;
+
+	if (!power_rule->max_antenna_gain)
+		snprintf(max_antenna_gain, 32, "N/A");
+	else
+		snprintf(max_antenna_gain, 32, "%d", power_rule->max_antenna_gain);
+
+	REG_DBG_PRINT("Updating information on frequency %d MHz "
+		      "for a %d MHz width channel with regulatory rule:\n",
+		      chan->center_freq,
+		      KHZ_TO_MHZ(desired_bw_khz));
+
+	REG_DBG_PRINT("%d KHz - %d KHz @  KHz), (%s mBi, %d mBm)\n",
+		      freq_range->start_freq_khz,
+		      freq_range->end_freq_khz,
+		      max_antenna_gain,
+		      power_rule->max_eirp);
+}
+#else
+static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan,
+				    u32 desired_bw_khz,
+				    const struct ieee80211_reg_rule *reg_rule)
+{
+	return;
+}
+#endif
+
 /*
  * Note that right now we assume the desired channel bandwidth
  * is always 20 MHz for each individual channel (HT40 uses 20 MHz
@@ -720,7 +780,9 @@ EXPORT_SYMBOL(freq_reg_info);
  * on the wiphy with the target_bw specified. Then we can simply use
  * that below for the desired_bw_khz below.
  */
-static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
+static void handle_channel(struct wiphy *wiphy,
+			   enum nl80211_reg_initiator initiator,
+			   enum ieee80211_band band,
 			   unsigned int chan_idx)
 {
 	int r;
@@ -748,8 +810,27 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 			  desired_bw_khz,
 			  &reg_rule);
 
-	if (r)
+	if (r) {
+		/*
+		 * We will disable all channels that do not match our
+		 * recieved regulatory rule unless the hint is coming
+		 * from a Country IE and the Country IE had no information
+		 * about a band. The IEEE 802.11 spec allows for an AP
+		 * to send only a subset of the regulatory rules allowed,
+		 * so an AP in the US that only supports 2.4 GHz may only send
+		 * a country IE with information for the 2.4 GHz band
+		 * while 5 GHz is still supported.
+		 */
+		if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE &&
+		    r == -ERANGE)
+			return;
+
+		REG_DBG_PRINT("Disabling freq %d MHz\n", chan->center_freq);
+		chan->flags = IEEE80211_CHAN_DISABLED;
 		return;
+	}
+
+	chan_reg_rule_print_dbg(chan, desired_bw_khz, reg_rule);
 
 	power_rule = &reg_rule->power_rule;
 	freq_range = &reg_rule->freq_range;
@@ -784,7 +865,9 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
 		chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
 }
 
-static void handle_band(struct wiphy *wiphy, enum ieee80211_band band)
+static void handle_band(struct wiphy *wiphy,
+			enum ieee80211_band band,
+			enum nl80211_reg_initiator initiator)
 {
 	unsigned int i;
 	struct ieee80211_supported_band *sband;
@@ -793,24 +876,42 @@ static void handle_band(struct wiphy *wiphy, enum ieee80211_band band)
 	sband = wiphy->bands[band];
 
 	for (i = 0; i < sband->n_channels; i++)
-		handle_channel(wiphy, band, i);
+		handle_channel(wiphy, initiator, band, i);
 }
 
 static bool ignore_reg_update(struct wiphy *wiphy,
 			      enum nl80211_reg_initiator initiator)
 {
-	if (!last_request)
+	if (!last_request) {
+		REG_DBG_PRINT("Ignoring regulatory request %s since "
+			      "last_request is not set\n",
+			      reg_initiator_name(initiator));
 		return true;
+	}
+
 	if (initiator == NL80211_REGDOM_SET_BY_CORE &&
-	    wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY)
+	    wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) {
+		REG_DBG_PRINT("Ignoring regulatory request %s "
+			      "since the driver uses its own custom "
+			      "regulatory domain ",
+			      reg_initiator_name(initiator));
 		return true;
+	}
+
 	/*
 	 * wiphy->regd will be set once the device has its own
 	 * desired regulatory domain set
 	 */
 	if (wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY && !wiphy->regd &&
-	    !is_world_regdom(last_request->alpha2))
+	    initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
+	    !is_world_regdom(last_request->alpha2)) {
+		REG_DBG_PRINT("Ignoring regulatory request %s "
+			      "since the driver requires its own regulaotry "
+			      "domain to be set first",
+			      reg_initiator_name(initiator));
 		return true;
+	}
+
 	return false;
 }
 
@@ -1030,7 +1131,7 @@ void wiphy_update_regulatory(struct wiphy *wiphy,
 		goto out;
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
 		if (wiphy->bands[band])
-			handle_band(wiphy, band);
+			handle_band(wiphy, band, initiator);
 	}
 out:
 	reg_process_beacons(wiphy);
@@ -1066,10 +1167,17 @@ static void handle_channel_custom(struct wiphy *wiphy,
 			       regd);
 
 	if (r) {
+		REG_DBG_PRINT("Disabling freq %d MHz as custom "
+			      "regd has no rule that fits a %d MHz "
+			      "wide channel\n",
+			      chan->center_freq,
+			      KHZ_TO_MHZ(desired_bw_khz));
 		chan->flags = IEEE80211_CHAN_DISABLED;
 		return;
 	}
 
+	chan_reg_rule_print_dbg(chan, desired_bw_khz, reg_rule);
+
 	power_rule = &reg_rule->power_rule;
 	freq_range = &reg_rule->freq_range;
 
@@ -1215,6 +1323,21 @@ static int ignore_request(struct wiphy *wiphy,
 	return -EINVAL;
 }
 
+static void reg_set_request_processed(void)
+{
+	bool need_more_processing = false;
+
+	last_request->processed = true;
+
+	spin_lock(&reg_requests_lock);
+	if (!list_empty(&reg_requests_list))
+		need_more_processing = true;
+	spin_unlock(&reg_requests_lock);
+
+	if (need_more_processing)
+		schedule_work(&reg_work);
+}
+
 /**
  * __regulatory_hint - hint to the wireless core a regulatory domain
  * @wiphy: if the hint comes from country information from an AP, this
@@ -1290,8 +1413,10 @@ new_request:
 		 * have applied the requested regulatory domain before we just
 		 * inform userspace we have processed the request
 		 */
-		if (r == -EALREADY)
+		if (r == -EALREADY) {
 			nl80211_send_reg_change_event(last_request);
+			reg_set_request_processed();
+		}
 		return r;
 	}
 
@@ -1307,16 +1432,13 @@ static void reg_process_hint(struct regulatory_request *reg_request)
 
 	BUG_ON(!reg_request->alpha2);
 
-	mutex_lock(&cfg80211_mutex);
-	mutex_lock(&reg_mutex);
-
 	if (wiphy_idx_valid(reg_request->wiphy_idx))
 		wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx);
 
 	if (reg_request->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
 	    !wiphy) {
 		kfree(reg_request);
-		goto out;
+		return;
 	}
 
 	r = __regulatory_hint(wiphy, reg_request);
@@ -1324,28 +1446,46 @@ static void reg_process_hint(struct regulatory_request *reg_request)
 	if (r == -EALREADY && wiphy &&
 	    wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY)
 		wiphy_update_regulatory(wiphy, initiator);
-out:
-	mutex_unlock(&reg_mutex);
-	mutex_unlock(&cfg80211_mutex);
 }
 
-/* Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_* */
+/*
+ * Processes regulatory hints, this is all the NL80211_REGDOM_SET_BY_*
+ * Regulatory hints come on a first come first serve basis and we
+ * must process each one atomically.
+ */
 static void reg_process_pending_hints(void)
-	{
+{
 	struct regulatory_request *reg_request;
 
+	mutex_lock(&cfg80211_mutex);
+	mutex_lock(&reg_mutex);
+
+	/* When last_request->processed becomes true this will be rescheduled */
+	if (last_request && !last_request->processed) {
+		REG_DBG_PRINT("Pending regulatory request, waiting "
+			      "for it to be processed...");
+		goto out;
+	}
+
 	spin_lock(&reg_requests_lock);
-	while (!list_empty(&reg_requests_list)) {
-		reg_request = list_first_entry(&reg_requests_list,
-					       struct regulatory_request,
-					       list);
-		list_del_init(&reg_request->list);
 
+	if (list_empty(&reg_requests_list)) {
 		spin_unlock(&reg_requests_lock);
-		reg_process_hint(reg_request);
-		spin_lock(&reg_requests_lock);
+		goto out;
 	}
+
+	reg_request = list_first_entry(&reg_requests_list,
+				       struct regulatory_request,
+				       list);
+	list_del_init(&reg_request->list);
+
 	spin_unlock(&reg_requests_lock);
+
+	reg_process_hint(reg_request);
+
+out:
+	mutex_unlock(&reg_mutex);
+	mutex_unlock(&cfg80211_mutex);
 }
 
 /* Processes beacon hints -- this has nothing to do with country IEs */
@@ -1392,8 +1532,6 @@ static void reg_todo(struct work_struct *work)
 	reg_process_pending_beacon_hints();
 }
 
-static DECLARE_WORK(reg_work, reg_todo);
-
 static void queue_regulatory_request(struct regulatory_request *request)
 {
 	if (isalpha(request->alpha2[0]))
@@ -1428,12 +1566,7 @@ static int regulatory_hint_core(const char *alpha2)
 	request->alpha2[1] = alpha2[1];
 	request->initiator = NL80211_REGDOM_SET_BY_CORE;
 
-	/*
-	 * This ensures last_request is populated once modules
-	 * come swinging in and calling regulatory hints and
-	 * wiphy_apply_custom_regulatory().
-	 */
-	reg_process_hint(request);
+	queue_regulatory_request(request);
 
 	return 0;
 }
@@ -1559,7 +1692,7 @@ static void restore_alpha2(char *alpha2, bool reset_user)
 	if (is_user_regdom_saved()) {
 		/* Unless we're asked to ignore it and reset it */
 		if (reset_user) {
-			REG_DBG_PRINT("cfg80211: Restoring regulatory settings "
+			REG_DBG_PRINT("Restoring regulatory settings "
 			       "including user preference\n");
 			user_alpha2[0] = '9';
 			user_alpha2[1] = '7';
@@ -1570,7 +1703,7 @@ static void restore_alpha2(char *alpha2, bool reset_user)
 			 * back as they were for a full restore.
 			 */
 			if (!is_world_regdom(ieee80211_regdom)) {
-				REG_DBG_PRINT("cfg80211: Keeping preference on "
+				REG_DBG_PRINT("Keeping preference on "
 				       "module parameter ieee80211_regdom: %c%c\n",
 				       ieee80211_regdom[0],
 				       ieee80211_regdom[1]);
@@ -1578,7 +1711,7 @@ static void restore_alpha2(char *alpha2, bool reset_user)
 				alpha2[1] = ieee80211_regdom[1];
 			}
 		} else {
-			REG_DBG_PRINT("cfg80211: Restoring regulatory settings "
+			REG_DBG_PRINT("Restoring regulatory settings "
 			       "while preserving user preference for: %c%c\n",
 			       user_alpha2[0],
 			       user_alpha2[1]);
@@ -1586,14 +1719,14 @@ static void restore_alpha2(char *alpha2, bool reset_user)
 			alpha2[1] = user_alpha2[1];
 		}
 	} else if (!is_world_regdom(ieee80211_regdom)) {
-		REG_DBG_PRINT("cfg80211: Keeping preference on "
+		REG_DBG_PRINT("Keeping preference on "
 		       "module parameter ieee80211_regdom: %c%c\n",
 		       ieee80211_regdom[0],
 		       ieee80211_regdom[1]);
 		alpha2[0] = ieee80211_regdom[0];
 		alpha2[1] = ieee80211_regdom[1];
 	} else
-		REG_DBG_PRINT("cfg80211: Restoring regulatory settings\n");
+		REG_DBG_PRINT("Restoring regulatory settings\n");
 }
 
 /*
@@ -1661,7 +1794,7 @@ static void restore_regulatory_settings(bool reset_user)
 
 void regulatory_hint_disconnect(void)
 {
-	REG_DBG_PRINT("cfg80211: All devices are disconnected, going to "
+	REG_DBG_PRINT("All devices are disconnected, going to "
 		      "restore regulatory settings\n");
 	restore_regulatory_settings(false);
 }
@@ -1691,7 +1824,7 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy,
 	if (!reg_beacon)
 		return -ENOMEM;
 
-	REG_DBG_PRINT("cfg80211: Found new beacon on "
+	REG_DBG_PRINT("Found new beacon on "
 		      "frequency: %d MHz (Ch %d) on %s\n",
 		      beacon_chan->center_freq,
 		      ieee80211_frequency_to_channel(beacon_chan->center_freq),
@@ -1721,8 +1854,7 @@ static void print_rd_rules(const struct ieee80211_regdomain *rd)
 	const struct ieee80211_freq_range *freq_range = NULL;
 	const struct ieee80211_power_rule *power_rule = NULL;
 
-	printk(KERN_INFO "    (start_freq - end_freq @ bandwidth), "
-		"(max_antenna_gain, max_eirp)\n");
+	pr_info("    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)\n");
 
 	for (i = 0; i < rd->n_reg_rules; i++) {
 		reg_rule = &rd->reg_rules[i];
@@ -1734,16 +1866,14 @@ static void print_rd_rules(const struct ieee80211_regdomain *rd)
 		 * in certain regions
 		 */
 		if (power_rule->max_antenna_gain)
-			printk(KERN_INFO "    (%d KHz - %d KHz @ %d KHz), "
-				"(%d mBi, %d mBm)\n",
+			pr_info("    (%d KHz - %d KHz @ %d KHz), (%d mBi, %d mBm)\n",
 				freq_range->start_freq_khz,
 				freq_range->end_freq_khz,
 				freq_range->max_bandwidth_khz,
 				power_rule->max_antenna_gain,
 				power_rule->max_eirp);
 		else
-			printk(KERN_INFO "    (%d KHz - %d KHz @ %d KHz), "
-				"(N/A, %d mBm)\n",
+			pr_info("    (%d KHz - %d KHz @ %d KHz), (N/A, %d mBm)\n",
 				freq_range->start_freq_khz,
 				freq_range->end_freq_khz,
 				freq_range->max_bandwidth_khz,
@@ -1762,27 +1892,20 @@ static void print_regdomain(const struct ieee80211_regdomain *rd)
 			rdev = cfg80211_rdev_by_wiphy_idx(
 				last_request->wiphy_idx);
 			if (rdev) {
-				printk(KERN_INFO "cfg80211: Current regulatory "
-					"domain updated by AP to: %c%c\n",
+				pr_info("Current regulatory domain updated by AP to: %c%c\n",
 					rdev->country_ie_alpha2[0],
 					rdev->country_ie_alpha2[1]);
 			} else
-				printk(KERN_INFO "cfg80211: Current regulatory "
-					"domain intersected:\n");
+				pr_info("Current regulatory domain intersected:\n");
 		} else
-			printk(KERN_INFO "cfg80211: Current regulatory "
-				"domain intersected:\n");
+			pr_info("Current regulatory domain intersected:\n");
 	} else if (is_world_regdom(rd->alpha2))
-		printk(KERN_INFO "cfg80211: World regulatory "
-			"domain updated:\n");
+		pr_info("World regulatory domain updated:\n");
 	else {
 		if (is_unknown_alpha2(rd->alpha2))
-			printk(KERN_INFO "cfg80211: Regulatory domain "
-				"changed to driver built-in settings "
-				"(unknown country)\n");
+			pr_info("Regulatory domain changed to driver built-in settings (unknown country)\n");
 		else
-			printk(KERN_INFO "cfg80211: Regulatory domain "
-				"changed to country: %c%c\n",
+			pr_info("Regulatory domain changed to country: %c%c\n",
 				rd->alpha2[0], rd->alpha2[1]);
 	}
 	print_rd_rules(rd);
@@ -1790,8 +1913,7 @@ static void print_regdomain(const struct ieee80211_regdomain *rd)
 
 static void print_regdomain_info(const struct ieee80211_regdomain *rd)
 {
-	printk(KERN_INFO "cfg80211: Regulatory domain: %c%c\n",
-		rd->alpha2[0], rd->alpha2[1]);
+	pr_info("Regulatory domain: %c%c\n", rd->alpha2[0], rd->alpha2[1]);
 	print_rd_rules(rd);
 }
 
@@ -1842,8 +1964,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd)
 		return -EINVAL;
 
 	if (!is_valid_rd(rd)) {
-		printk(KERN_ERR "cfg80211: Invalid "
-			"regulatory domain detected:\n");
+		pr_err("Invalid regulatory domain detected:\n");
 		print_regdomain_info(rd);
 		return -EINVAL;
 	}
@@ -1959,6 +2080,8 @@ int set_regdom(const struct ieee80211_regdomain *rd)
 
 	nl80211_send_reg_change_event(last_request);
 
+	reg_set_request_processed();
+
 	mutex_unlock(&reg_mutex);
 
 	return r;
@@ -2015,8 +2138,7 @@ int __init regulatory_init(void)
 		 * early boot for call_usermodehelper(). For now treat these
 		 * errors as non-fatal.
 		 */
-		printk(KERN_ERR "cfg80211: kobject_uevent_env() was unable "
-			"to call CRDA during init");
+		pr_err("kobject_uevent_env() was unable to call CRDA during init\n");
 #ifdef CONFIG_CFG80211_REG_DEBUG
 		/* We want to find out exactly why when debugging */
 		WARN_ON(err);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 503ebb86ba1..ea427f418f6 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -464,6 +464,9 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 		if (res->pub.beacon_ies) {
 			size_t used = dev->wiphy.bss_priv_size + sizeof(*res);
 			size_t ielen = res->pub.len_beacon_ies;
+			bool information_elements_is_beacon_ies =
+				(found->pub.information_elements ==
+				 found->pub.beacon_ies);
 
 			if (found->pub.beacon_ies &&
 			    !found->beacon_ies_allocated &&
@@ -487,6 +490,14 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
 					found->pub.len_beacon_ies = ielen;
 				}
 			}
+
+			/* Override IEs if they were from a beacon before */
+			if (information_elements_is_beacon_ies) {
+				found->pub.information_elements =
+					found->pub.beacon_ies;
+				found->pub.len_information_elements =
+					found->pub.len_beacon_ies;
+			}
 		}
 
 		kref_put(&res->ref, bss_release);
diff --git a/net/wireless/util.c b/net/wireless/util.c
index 76120aeda57..7620ae2fcf1 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -502,7 +502,7 @@ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr,
 			skb_orphan(skb);
 
 		if (pskb_expand_head(skb, head_need, 0, GFP_ATOMIC)) {
-			printk(KERN_ERR "failed to reallocate Tx buffer\n");
+			pr_err("failed to reallocate Tx buffer\n");
 			return -ENOMEM;
 		}
 		skb->truesize += head_need;
@@ -685,20 +685,18 @@ void cfg80211_upload_connect_keys(struct wireless_dev *wdev)
 			continue;
 		if (rdev->ops->add_key(wdev->wiphy, dev, i, false, NULL,
 					&wdev->connect_keys->params[i])) {
-			printk(KERN_ERR "%s: failed to set key %d\n",
-				dev->name, i);
+			netdev_err(dev, "failed to set key %d\n", i);
 			continue;
 		}
 		if (wdev->connect_keys->def == i)
-			if (rdev->ops->set_default_key(wdev->wiphy, dev, i)) {
-				printk(KERN_ERR "%s: failed to set defkey %d\n",
-					dev->name, i);
+			if (rdev->ops->set_default_key(wdev->wiphy, dev,
+						       i, true, true)) {
+				netdev_err(dev, "failed to set defkey %d\n", i);
 				continue;
 			}
 		if (wdev->connect_keys->defmgmt == i)
 			if (rdev->ops->set_default_mgmt_key(wdev->wiphy, dev, i))
-				printk(KERN_ERR "%s: failed to set mgtdef %d\n",
-					dev->name, i);
+				netdev_err(dev, "failed to set mgtdef %d\n", i);
 	}
 
 	kfree(wdev->connect_keys);
@@ -795,6 +793,7 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev,
 
 	if (ntype != otype) {
 		dev->ieee80211_ptr->use_4addr = false;
+		dev->ieee80211_ptr->mesh_id_up_len = 0;
 
 		switch (otype) {
 		case NL80211_IFTYPE_ADHOC:
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 12222ee6ebf..3e5dbd4e4cd 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -548,8 +548,8 @@ static int __cfg80211_set_encryption(struct cfg80211_registered_device *rdev,
 				__cfg80211_leave_ibss(rdev, wdev->netdev, true);
 				rejoin = true;
 			}
-			err = rdev->ops->set_default_key(&rdev->wiphy,
-							 dev, idx);
+			err = rdev->ops->set_default_key(&rdev->wiphy, dev,
+							 idx, true, true);
 		}
 		if (!err) {
 			wdev->wext.default_key = idx;
@@ -627,8 +627,8 @@ int cfg80211_wext_siwencode(struct net_device *dev,
 		err = 0;
 		wdev_lock(wdev);
 		if (wdev->current_bss)
-			err = rdev->ops->set_default_key(&rdev->wiphy,
-							 dev, idx);
+			err = rdev->ops->set_default_key(&rdev->wiphy, dev,
+							 idx, true, true);
 		if (!err)
 			wdev->wext.default_key = idx;
 		wdev_unlock(wdev);
diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c
index dc675a3daa3..fdbc23c10d8 100644
--- a/net/wireless/wext-core.c
+++ b/net/wireless/wext-core.c
@@ -467,8 +467,8 @@ void wireless_send_event(struct net_device *	dev,
 		 * The best the driver could do is to log an error message.
 		 * We will do it ourselves instead...
 		 */
-		printk(KERN_ERR "%s (WE) : Invalid/Unknown Wireless Event (0x%04X)\n",
-		       dev->name, cmd);
+		netdev_err(dev, "(WE) : Invalid/Unknown Wireless Event (0x%04X)\n",
+			   cmd);
 		return;
 	}
 
@@ -476,11 +476,13 @@ void wireless_send_event(struct net_device *	dev,
 	if (descr->header_type == IW_HEADER_TYPE_POINT) {
 		/* Check if number of token fits within bounds */
 		if (wrqu->data.length > descr->max_tokens) {
-			printk(KERN_ERR "%s (WE) : Wireless Event too big (%d)\n", dev->name, wrqu->data.length);
+			netdev_err(dev, "(WE) : Wireless Event too big (%d)\n",
+				   wrqu->data.length);
 			return;
 		}
 		if (wrqu->data.length < descr->min_tokens) {
-			printk(KERN_ERR "%s (WE) : Wireless Event too small (%d)\n", dev->name, wrqu->data.length);
+			netdev_err(dev, "(WE) : Wireless Event too small (%d)\n",
+				   wrqu->data.length);
 			return;
 		}
 		/* Calculate extra_len - extra is NULL for restricted events */
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index f7af98dff40..ad96ee90fe2 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -1357,11 +1357,11 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 	void __user *argp = (void __user *)arg;
 	int rc;
 
-	lock_kernel();
 	switch (cmd) {
 		case TIOCOUTQ: {
-			int amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
+			int amount;
 
+			amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk);
 			if (amount < 0)
 				amount = 0;
 			rc = put_user(amount, (unsigned int __user *)argp);
@@ -1375,8 +1375,10 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			 * These two are safe on a single CPU system as
 			 * only user tasks fiddle here
 			 */
+			lock_sock(sk);
 			if ((skb = skb_peek(&sk->sk_receive_queue)) != NULL)
 				amount = skb->len;
+			release_sock(sk);
 			rc = put_user(amount, (unsigned int __user *)argp);
 			break;
 		}
@@ -1422,9 +1424,11 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			rc = x25_subscr_ioctl(cmd, argp);
 			break;
 		case SIOCX25GFACILITIES: {
-			struct x25_facilities fac = x25->facilities;
-			rc = copy_to_user(argp, &fac,
-					  sizeof(fac)) ? -EFAULT : 0;
+			lock_sock(sk);
+			rc = copy_to_user(argp, &x25->facilities,
+						sizeof(x25->facilities))
+						? -EFAULT : 0;
+			release_sock(sk);
 			break;
 		}
 
@@ -1435,18 +1439,19 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 					   sizeof(facilities)))
 				break;
 			rc = -EINVAL;
+			lock_sock(sk);
 			if (sk->sk_state != TCP_LISTEN &&
 			    sk->sk_state != TCP_CLOSE)
-				break;
+				goto out_fac_release;
 			if (facilities.pacsize_in < X25_PS16 ||
 			    facilities.pacsize_in > X25_PS4096)
-				break;
+				goto out_fac_release;
 			if (facilities.pacsize_out < X25_PS16 ||
 			    facilities.pacsize_out > X25_PS4096)
-				break;
+				goto out_fac_release;
 			if (facilities.winsize_in < 1 ||
 			    facilities.winsize_in > 127)
-				break;
+				goto out_fac_release;
 			if (facilities.throughput) {
 				int out = facilities.throughput & 0xf0;
 				int in  = facilities.throughput & 0x0f;
@@ -1454,24 +1459,28 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 					facilities.throughput |=
 						X25_DEFAULT_THROUGHPUT << 4;
 				else if (out < 0x30 || out > 0xD0)
-					break;
+					goto out_fac_release;
 				if (!in)
 					facilities.throughput |=
 						X25_DEFAULT_THROUGHPUT;
 				else if (in < 0x03 || in > 0x0D)
-					break;
+					goto out_fac_release;
 			}
 			if (facilities.reverse &&
 				(facilities.reverse & 0x81) != 0x81)
-				break;
+				goto out_fac_release;
 			x25->facilities = facilities;
 			rc = 0;
+out_fac_release:
+			release_sock(sk);
 			break;
 		}
 
 		case SIOCX25GDTEFACILITIES: {
+			lock_sock(sk);
 			rc = copy_to_user(argp, &x25->dte_facilities,
 						sizeof(x25->dte_facilities));
+			release_sock(sk);
 			if (rc)
 				rc = -EFAULT;
 			break;
@@ -1483,26 +1492,31 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			if (copy_from_user(&dtefacs, argp, sizeof(dtefacs)))
 				break;
 			rc = -EINVAL;
+			lock_sock(sk);
 			if (sk->sk_state != TCP_LISTEN &&
 					sk->sk_state != TCP_CLOSE)
-				break;
+				goto out_dtefac_release;
 			if (dtefacs.calling_len > X25_MAX_AE_LEN)
-				break;
+				goto out_dtefac_release;
 			if (dtefacs.calling_ae == NULL)
-				break;
+				goto out_dtefac_release;
 			if (dtefacs.called_len > X25_MAX_AE_LEN)
-				break;
+				goto out_dtefac_release;
 			if (dtefacs.called_ae == NULL)
-				break;
+				goto out_dtefac_release;
 			x25->dte_facilities = dtefacs;
 			rc = 0;
+out_dtefac_release:
+			release_sock(sk);
 			break;
 		}
 
 		case SIOCX25GCALLUSERDATA: {
-			struct x25_calluserdata cud = x25->calluserdata;
-			rc = copy_to_user(argp, &cud,
-					  sizeof(cud)) ? -EFAULT : 0;
+			lock_sock(sk);
+			rc = copy_to_user(argp, &x25->calluserdata,
+					sizeof(x25->calluserdata))
+					? -EFAULT : 0;
+			release_sock(sk);
 			break;
 		}
 
@@ -1516,16 +1530,19 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			rc = -EINVAL;
 			if (calluserdata.cudlength > X25_MAX_CUD_LEN)
 				break;
+			lock_sock(sk);
 			x25->calluserdata = calluserdata;
+			release_sock(sk);
 			rc = 0;
 			break;
 		}
 
 		case SIOCX25GCAUSEDIAG: {
-			struct x25_causediag causediag;
-			causediag = x25->causediag;
-			rc = copy_to_user(argp, &causediag,
-					  sizeof(causediag)) ? -EFAULT : 0;
+			lock_sock(sk);
+			rc = copy_to_user(argp, &x25->causediag,
+					sizeof(x25->causediag))
+					? -EFAULT : 0;
+			release_sock(sk);
 			break;
 		}
 
@@ -1534,7 +1551,9 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			rc = -EFAULT;
 			if (copy_from_user(&causediag, argp, sizeof(causediag)))
 				break;
+			lock_sock(sk);
 			x25->causediag = causediag;
+			release_sock(sk);
 			rc = 0;
 			break;
 
@@ -1543,31 +1562,37 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 		case SIOCX25SCUDMATCHLEN: {
 			struct x25_subaddr sub_addr;
 			rc = -EINVAL;
+			lock_sock(sk);
 			if(sk->sk_state != TCP_CLOSE)
-				break;
+				goto out_cud_release;
 			rc = -EFAULT;
 			if (copy_from_user(&sub_addr, argp,
 					sizeof(sub_addr)))
-				break;
+				goto out_cud_release;
 			rc = -EINVAL;
 			if(sub_addr.cudmatchlength > X25_MAX_CUD_LEN)
-				break;
+				goto out_cud_release;
 			x25->cudmatchlength = sub_addr.cudmatchlength;
 			rc = 0;
+out_cud_release:
+			release_sock(sk);
 			break;
 		}
 
 		case SIOCX25CALLACCPTAPPRV: {
 			rc = -EINVAL;
+			lock_kernel();
 			if (sk->sk_state != TCP_CLOSE)
 				break;
 			clear_bit(X25_ACCPT_APPRV_FLAG, &x25->flags);
+			unlock_kernel();
 			rc = 0;
 			break;
 		}
 
 		case SIOCX25SENDCALLACCPT:  {
 			rc = -EINVAL;
+			lock_kernel();
 			if (sk->sk_state != TCP_ESTABLISHED)
 				break;
 			/* must call accptapprv above */
@@ -1575,6 +1600,7 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 				break;
 			x25_write_internal(sk, X25_CALL_ACCEPTED);
 			x25->state = X25_STATE_3;
+			unlock_kernel();
 			rc = 0;
 			break;
 		}
@@ -1583,7 +1609,6 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
 			rc = -ENOIOCTLCMD;
 			break;
 	}
-	unlock_kernel();
 
 	return rc;
 }
@@ -1619,16 +1644,20 @@ static int compat_x25_subscr_ioctl(unsigned int cmd,
 	dev_put(dev);
 
 	if (cmd == SIOCX25GSUBSCRIP) {
+		read_lock_bh(&x25_neigh_list_lock);
 		x25_subscr.extended = nb->extended;
 		x25_subscr.global_facil_mask = nb->global_facil_mask;
+		read_unlock_bh(&x25_neigh_list_lock);
 		rc = copy_to_user(x25_subscr32, &x25_subscr,
 				sizeof(*x25_subscr32)) ? -EFAULT : 0;
 	} else {
 		rc = -EINVAL;
 		if (x25_subscr.extended == 0 || x25_subscr.extended == 1) {
 			rc = 0;
+			write_lock_bh(&x25_neigh_list_lock);
 			nb->extended = x25_subscr.extended;
 			nb->global_facil_mask = x25_subscr.global_facil_mask;
+			write_unlock_bh(&x25_neigh_list_lock);
 		}
 	}
 	x25_neigh_put(nb);
@@ -1654,19 +1683,15 @@ static int compat_x25_ioctl(struct socket *sock, unsigned int cmd,
 		break;
 	case SIOCGSTAMP:
 		rc = -EINVAL;
-		lock_kernel();
 		if (sk)
 			rc = compat_sock_get_timestamp(sk,
 					(struct timeval __user*)argp);
-		unlock_kernel();
 		break;
 	case SIOCGSTAMPNS:
 		rc = -EINVAL;
-		lock_kernel();
 		if (sk)
 			rc = compat_sock_get_timestampns(sk,
 					(struct timespec __user*)argp);
-		unlock_kernel();
 		break;
 	case SIOCGIFADDR:
 	case SIOCSIFADDR:
@@ -1685,22 +1710,16 @@ static int compat_x25_ioctl(struct socket *sock, unsigned int cmd,
 		rc = -EPERM;
 		if (!capable(CAP_NET_ADMIN))
 			break;
-		lock_kernel();
 		rc = x25_route_ioctl(cmd, argp);
-		unlock_kernel();
 		break;
 	case SIOCX25GSUBSCRIP:
-		lock_kernel();
 		rc = compat_x25_subscr_ioctl(cmd, argp);
-		unlock_kernel();
 		break;
 	case SIOCX25SSUBSCRIP:
 		rc = -EPERM;
 		if (!capable(CAP_NET_ADMIN))
 			break;
-		lock_kernel();
 		rc = compat_x25_subscr_ioctl(cmd, argp);
-		unlock_kernel();
 		break;
 	case SIOCX25GFACILITIES:
 	case SIOCX25SFACILITIES:
diff --git a/net/x25/x25_facilities.c b/net/x25/x25_facilities.c
index 3a8c4c419cd..55187c8f642 100644
--- a/net/x25/x25_facilities.c
+++ b/net/x25/x25_facilities.c
@@ -61,6 +61,8 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 	while (len > 0) {
 		switch (*p & X25_FAC_CLASS_MASK) {
 		case X25_FAC_CLASS_A:
+			if (len < 2)
+				return 0;
 			switch (*p) {
 			case X25_FAC_REVERSE:
 				if((p[1] & 0x81) == 0x81) {
@@ -104,6 +106,8 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 			len -= 2;
 			break;
 		case X25_FAC_CLASS_B:
+			if (len < 3)
+				return 0;
 			switch (*p) {
 			case X25_FAC_PACKET_SIZE:
 				facilities->pacsize_in  = p[1];
@@ -125,6 +129,8 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 			len -= 3;
 			break;
 		case X25_FAC_CLASS_C:
+			if (len < 4)
+				return 0;
 			printk(KERN_DEBUG "X.25: unknown facility %02X, "
 			       "values %02X, %02X, %02X\n",
 			       p[0], p[1], p[2], p[3]);
@@ -132,6 +138,8 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 			len -= 4;
 			break;
 		case X25_FAC_CLASS_D:
+			if (len < p[1] + 2)
+				return 0;
 			switch (*p) {
 			case X25_FAC_CALLING_AE:
 				if (p[1] > X25_MAX_DTE_FACIL_LEN || p[1] <= 1)
@@ -149,9 +157,7 @@ int x25_parse_facilities(struct sk_buff *skb, struct x25_facilities *facilities,
 				break;
 			default:
 				printk(KERN_DEBUG "X.25: unknown facility %02X,"
-					"length %d, values %02X, %02X, "
-					"%02X, %02X\n",
-					p[0], p[1], p[2], p[3], p[4], p[5]);
+					"length %d\n", p[0], p[1]);
 				break;
 			}
 			len -= p[1] + 2;
diff --git a/net/x25/x25_link.c b/net/x25/x25_link.c
index 73e7b954ad2..4cbc942f762 100644
--- a/net/x25/x25_link.c
+++ b/net/x25/x25_link.c
@@ -31,8 +31,8 @@
 #include <linux/init.h>
 #include <net/x25.h>
 
-static LIST_HEAD(x25_neigh_list);
-static DEFINE_RWLOCK(x25_neigh_list_lock);
+LIST_HEAD(x25_neigh_list);
+DEFINE_RWLOCK(x25_neigh_list_lock);
 
 static void x25_t20timer_expiry(unsigned long);
 
@@ -360,16 +360,20 @@ int x25_subscr_ioctl(unsigned int cmd, void __user *arg)
 	dev_put(dev);
 
 	if (cmd == SIOCX25GSUBSCRIP) {
+		read_lock_bh(&x25_neigh_list_lock);
 		x25_subscr.extended	     = nb->extended;
 		x25_subscr.global_facil_mask = nb->global_facil_mask;
+		read_unlock_bh(&x25_neigh_list_lock);
 		rc = copy_to_user(arg, &x25_subscr,
 				  sizeof(x25_subscr)) ? -EFAULT : 0;
 	} else {
 		rc = -EINVAL;
 		if (!(x25_subscr.extended && x25_subscr.extended != 1)) {
 			rc = 0;
+			write_lock_bh(&x25_neigh_list_lock);
 			nb->extended	     = x25_subscr.extended;
 			nb->global_facil_mask = x25_subscr.global_facil_mask;
+			write_unlock_bh(&x25_neigh_list_lock);
 		}
 	}
 	x25_neigh_put(nb);
@@ -394,6 +398,7 @@ void __exit x25_link_free(void)
 	list_for_each_safe(entry, tmp, &x25_neigh_list) {
 		nb = list_entry(entry, struct x25_neigh, node);
 		__x25_remove_neigh(nb);
+		dev_put(nb->dev);
 	}
 	write_unlock_bh(&x25_neigh_list_lock);
 }
diff --git a/net/xfrm/xfrm_hash.c b/net/xfrm/xfrm_hash.c
index a2023ec5232..1e98bc0fe0a 100644
--- a/net/xfrm/xfrm_hash.c
+++ b/net/xfrm/xfrm_hash.c
@@ -19,7 +19,7 @@ struct hlist_head *xfrm_hash_alloc(unsigned int sz)
 	if (sz <= PAGE_SIZE)
 		n = kzalloc(sz, GFP_KERNEL);
 	else if (hashdist)
-		n = __vmalloc(sz, GFP_KERNEL | __GFP_ZERO, PAGE_KERNEL);
+		n = vzalloc(sz);
 	else
 		n = (struct hlist_head *)
 			__get_free_pages(GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO,
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 044e7789851..8b3ef404c79 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1433,7 +1433,7 @@ static struct dst_entry *xfrm_bundle_create(struct xfrm_policy *policy,
 		}
 
 		xdst->route = dst;
-		memcpy(&dst1->metrics, &dst->metrics, sizeof(dst->metrics));
+		dst_copy_metrics(dst1, dst);
 
 		if (xfrm[i]->props.mode != XFRM_MODE_TRANSPORT) {
 			family = xfrm[i]->props.family;
@@ -2271,7 +2271,7 @@ static void xfrm_init_pmtu(struct dst_entry *dst)
 		if (pmtu > route_mtu_cached)
 			pmtu = route_mtu_cached;
 
-		dst->metrics[RTAX_MTU-1] = pmtu;
+		dst_metric_set(dst, RTAX_MTU, pmtu);
 	} while ((dst = dst->next));
 }
 
@@ -2349,7 +2349,7 @@ static int xfrm_bundle_ok(struct xfrm_policy *pol, struct xfrm_dst *first,
 		mtu = xfrm_state_mtu(dst->xfrm, mtu);
 		if (mtu > last->route_mtu_cached)
 			mtu = last->route_mtu_cached;
-		dst->metrics[RTAX_MTU-1] = mtu;
+		dst_metric_set(dst, RTAX_MTU, mtu);
 
 		if (last == first)
 			break;
@@ -2361,6 +2361,16 @@ static int xfrm_bundle_ok(struct xfrm_policy *pol, struct xfrm_dst *first,
 	return 1;
 }
 
+static unsigned int xfrm_default_advmss(const struct dst_entry *dst)
+{
+	return dst_metric_advmss(dst->path);
+}
+
+static unsigned int xfrm_default_mtu(const struct dst_entry *dst)
+{
+	return dst_mtu(dst->path);
+}
+
 int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo)
 {
 	struct net *net;
@@ -2378,6 +2388,10 @@ int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo)
 			dst_ops->kmem_cachep = xfrm_dst_cache;
 		if (likely(dst_ops->check == NULL))
 			dst_ops->check = xfrm_dst_check;
+		if (likely(dst_ops->default_advmss == NULL))
+			dst_ops->default_advmss = xfrm_default_advmss;
+		if (likely(dst_ops->default_mtu == NULL))
+			dst_ops->default_mtu = xfrm_default_mtu;
 		if (likely(dst_ops->negative_advice == NULL))
 			dst_ops->negative_advice = xfrm_negative_advice;
 		if (likely(dst_ops->link_failure == NULL))
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index eb96ce52f17..220ebc05c7a 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -1268,7 +1268,7 @@ struct xfrm_state * xfrm_state_migrate(struct xfrm_state *x,
 
 	return xc;
 error:
-	kfree(xc);
+	xfrm_state_put(xc);
 	return NULL;
 }
 EXPORT_SYMBOL(xfrm_state_migrate);
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index 8bae6b22c84..8eb88951091 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -148,7 +148,8 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 		     !attrs[XFRMA_ALG_AUTH_TRUNC]) ||
 		    attrs[XFRMA_ALG_AEAD]	||
 		    attrs[XFRMA_ALG_CRYPT]	||
-		    attrs[XFRMA_ALG_COMP])
+		    attrs[XFRMA_ALG_COMP]	||
+		    attrs[XFRMA_TFCPAD])
 			goto out;
 		break;
 
@@ -165,6 +166,9 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 		     attrs[XFRMA_ALG_CRYPT]) &&
 		    attrs[XFRMA_ALG_AEAD])
 			goto out;
+		if (attrs[XFRMA_TFCPAD] &&
+		    p->mode != XFRM_MODE_TUNNEL)
+			goto out;
 		break;
 
 	case IPPROTO_COMP:
@@ -172,7 +176,8 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 		    attrs[XFRMA_ALG_AEAD]	||
 		    attrs[XFRMA_ALG_AUTH]	||
 		    attrs[XFRMA_ALG_AUTH_TRUNC]	||
-		    attrs[XFRMA_ALG_CRYPT])
+		    attrs[XFRMA_ALG_CRYPT]	||
+		    attrs[XFRMA_TFCPAD])
 			goto out;
 		break;
 
@@ -186,6 +191,7 @@ static int verify_newsa_info(struct xfrm_usersa_info *p,
 		    attrs[XFRMA_ALG_CRYPT]	||
 		    attrs[XFRMA_ENCAP]		||
 		    attrs[XFRMA_SEC_CTX]	||
+		    attrs[XFRMA_TFCPAD]		||
 		    !attrs[XFRMA_COADDR])
 			goto out;
 		break;
@@ -439,6 +445,9 @@ static struct xfrm_state *xfrm_state_construct(struct net *net,
 			goto error;
 	}
 
+	if (attrs[XFRMA_TFCPAD])
+		x->tfcpad = nla_get_u32(attrs[XFRMA_TFCPAD]);
+
 	if (attrs[XFRMA_COADDR]) {
 		x->coaddr = kmemdup(nla_data(attrs[XFRMA_COADDR]),
 				    sizeof(*x->coaddr), GFP_KERNEL);
@@ -688,6 +697,9 @@ static int copy_to_user_state_extra(struct xfrm_state *x,
 	if (x->encap)
 		NLA_PUT(skb, XFRMA_ENCAP, sizeof(*x->encap), x->encap);
 
+	if (x->tfcpad)
+		NLA_PUT_U32(skb, XFRMA_TFCPAD, x->tfcpad);
+
 	if (xfrm_mark_put(skb, &x->mark))
 		goto nla_put_failure;
 
@@ -2122,6 +2134,7 @@ static const struct nla_policy xfrma_policy[XFRMA_MAX+1] = {
 	[XFRMA_MIGRATE]		= { .len = sizeof(struct xfrm_user_migrate) },
 	[XFRMA_KMADDRESS]	= { .len = sizeof(struct xfrm_user_kmaddress) },
 	[XFRMA_MARK]		= { .len = sizeof(struct xfrm_mark) },
+	[XFRMA_TFCPAD]		= { .type = NLA_U32 },
 };
 
 static struct xfrm_link {
@@ -2301,6 +2314,8 @@ static inline size_t xfrm_sa_len(struct xfrm_state *x)
 		l += nla_total_size(sizeof(*x->calg));
 	if (x->encap)
 		l += nla_total_size(sizeof(*x->encap));
+	if (x->tfcpad)
+		l += nla_total_size(sizeof(x->tfcpad));
 	if (x->security)
 		l += nla_total_size(sizeof(struct xfrm_user_sec_ctx) +
 				    x->security->ctx_len);
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 5ad25e17b6c..4eb99ab3405 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -214,17 +214,22 @@ ifdef BUILD_C_RECORDMCOUNT
 # The empty.o file is created in the make process in order to determine
 #  the target endianness and word size. It is made before all other C
 #  files, including recordmcount.
-cmd_record_mcount = if [ $(@) != "scripts/mod/empty.o" ]; then			\
-			$(objtree)/scripts/recordmcount "$(@)";			\
-		    fi;
+sub_cmd_record_mcount =					\
+	if [ $(@) != "scripts/mod/empty.o" ]; then	\
+		$(objtree)/scripts/recordmcount "$(@)";	\
+	fi;
 else
-cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
+sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
 	"$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
 	"$(if $(CONFIG_64BIT),64,32)" \
 	"$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
 	"$(LD)" "$(NM)" "$(RM)" "$(MV)" \
 	"$(if $(part-of-module),1,0)" "$(@)";
 endif
+cmd_record_mcount = 						\
+	if [ "$(findstring -pg,$(_c_flags))" = "-pg" ]; then	\
+		$(sub_cmd_record_mcount)			\
+	fi;
 endif
 
 define rule_cc_o_c
diff --git a/scripts/gfp-translate b/scripts/gfp-translate
index d81b968d864..c9230e158a8 100644
--- a/scripts/gfp-translate
+++ b/scripts/gfp-translate
@@ -63,7 +63,12 @@ fi
 
 # Extract GFP flags from the kernel source
 TMPFILE=`mktemp -t gfptranslate-XXXXXX` || exit 1
-grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE
+grep -q ___GFP $SOURCE/include/linux/gfp.h
+if [ $? -eq 0 ]; then
+	grep "^#define ___GFP" $SOURCE/include/linux/gfp.h | sed -e 's/u$//' | grep -v GFP_BITS > $TMPFILE
+else
+	grep "^#define __GFP" $SOURCE/include/linux/gfp.h | sed -e 's/(__force gfp_t)//' | sed -e 's/u)/)/' | grep -v GFP_BITS | sed -e 's/)\//) \//' > $TMPFILE
+fi
 
 # Parse the flags
 IFS="
diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h
index 184eb6a0b50..e57826ced38 100644
--- a/scripts/kconfig/expr.h
+++ b/scripts/kconfig/expr.h
@@ -164,6 +164,7 @@ struct menu {
 	struct menu *list;
 	struct symbol *sym;
 	struct property *prompt;
+	struct expr *visibility;
 	struct expr *dep;
 	unsigned int flags;
 	char *help;
diff --git a/scripts/kconfig/lkc.h b/scripts/kconfig/lkc.h
index 753cdbd7b80..3f7240df0f3 100644
--- a/scripts/kconfig/lkc.h
+++ b/scripts/kconfig/lkc.h
@@ -107,6 +107,7 @@ void menu_end_menu(void);
 void menu_add_entry(struct symbol *sym);
 void menu_end_entry(void);
 void menu_add_dep(struct expr *dep);
+void menu_add_visibility(struct expr *dep);
 struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep);
 struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
 void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep);
diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c
index 7e83aef42c6..5f77dcb8977 100644
--- a/scripts/kconfig/menu.c
+++ b/scripts/kconfig/menu.c
@@ -140,6 +140,20 @@ struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *e
 		}
 		if (current_entry->prompt && current_entry != &rootmenu)
 			prop_warn(prop, "prompt redefined");
+
+		/* Apply all upper menus' visibilities to actual prompts. */
+		if(type == P_PROMPT) {
+			struct menu *menu = current_entry;
+
+			while ((menu = menu->parent) != NULL) {
+				if (!menu->visibility)
+					continue;
+				prop->visible.expr
+					= expr_alloc_and(prop->visible.expr,
+							 menu->visibility);
+			}
+		}
+
 		current_entry->prompt = prop;
 	}
 	prop->text = prompt;
@@ -152,6 +166,12 @@ struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr
 	return menu_add_prop(type, prompt, NULL, dep);
 }
 
+void menu_add_visibility(struct expr *expr)
+{
+	current_entry->visibility = expr_alloc_and(current_entry->visibility,
+	    expr);
+}
+
 void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep)
 {
 	menu_add_prop(type, NULL, expr, dep);
@@ -410,6 +430,11 @@ bool menu_is_visible(struct menu *menu)
 	if (!menu->prompt)
 		return false;
 
+	if (menu->visibility) {
+		if (expr_calc_value(menu->visibility) == no)
+			return no;
+	}
+
 	sym = menu->sym;
 	if (sym) {
 		sym_calc_value(sym);
diff --git a/scripts/kconfig/zconf.gperf b/scripts/kconfig/zconf.gperf
index d8bc7424962..c9e690eb754 100644
--- a/scripts/kconfig/zconf.gperf
+++ b/scripts/kconfig/zconf.gperf
@@ -38,6 +38,7 @@ hex,		T_TYPE,		TF_COMMAND, S_HEX
 string,		T_TYPE,		TF_COMMAND, S_STRING
 select,		T_SELECT,	TF_COMMAND
 range,		T_RANGE,	TF_COMMAND
+visible,	T_VISIBLE,	TF_COMMAND
 option,		T_OPTION,	TF_COMMAND
 on,		T_ON,		TF_PARAM
 modules,	T_OPT_MODULES,	TF_OPTION
diff --git a/scripts/kconfig/zconf.hash.c_shipped b/scripts/kconfig/zconf.hash.c_shipped
index c1748faf463..4055d5de175 100644
--- a/scripts/kconfig/zconf.hash.c_shipped
+++ b/scripts/kconfig/zconf.hash.c_shipped
@@ -32,7 +32,7 @@
 struct kconf_id;
 
 static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len);
-/* maximum key range = 47, duplicates = 0 */
+/* maximum key range = 50, duplicates = 0 */
 
 #ifdef __GNUC__
 __inline
@@ -46,32 +46,32 @@ kconf_id_hash (register const char *str, register unsigned int len)
 {
   static unsigned char asso_values[] =
     {
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 11,  5,
-       0,  0,  5, 49,  5, 20, 49, 49,  5, 20,
-       5,  0, 30, 49,  0, 15,  0, 10,  0, 49,
-      25, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
-      49, 49, 49, 49, 49, 49
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 40,  5,
+       0,  0,  5, 52,  0, 20, 52, 52, 10, 20,
+       5,  0, 35, 52,  0, 30,  0, 15,  0, 52,
+      15, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+      52, 52, 52, 52, 52, 52
     };
   register int hval = len;
 
@@ -102,25 +102,26 @@ struct kconf_id_strings_t
     char kconf_id_strings_str12[sizeof("default")];
     char kconf_id_strings_str13[sizeof("def_bool")];
     char kconf_id_strings_str14[sizeof("help")];
-    char kconf_id_strings_str15[sizeof("bool")];
     char kconf_id_strings_str16[sizeof("config")];
     char kconf_id_strings_str17[sizeof("def_tristate")];
-    char kconf_id_strings_str18[sizeof("boolean")];
+    char kconf_id_strings_str18[sizeof("hex")];
     char kconf_id_strings_str19[sizeof("defconfig_list")];
-    char kconf_id_strings_str21[sizeof("string")];
     char kconf_id_strings_str22[sizeof("if")];
     char kconf_id_strings_str23[sizeof("int")];
-    char kconf_id_strings_str26[sizeof("select")];
     char kconf_id_strings_str27[sizeof("modules")];
     char kconf_id_strings_str28[sizeof("tristate")];
     char kconf_id_strings_str29[sizeof("menu")];
-    char kconf_id_strings_str31[sizeof("source")];
     char kconf_id_strings_str32[sizeof("comment")];
-    char kconf_id_strings_str33[sizeof("hex")];
     char kconf_id_strings_str35[sizeof("menuconfig")];
-    char kconf_id_strings_str36[sizeof("prompt")];
-    char kconf_id_strings_str37[sizeof("depends")];
+    char kconf_id_strings_str36[sizeof("string")];
+    char kconf_id_strings_str37[sizeof("visible")];
+    char kconf_id_strings_str41[sizeof("prompt")];
+    char kconf_id_strings_str42[sizeof("depends")];
+    char kconf_id_strings_str44[sizeof("bool")];
+    char kconf_id_strings_str46[sizeof("select")];
+    char kconf_id_strings_str47[sizeof("boolean")];
     char kconf_id_strings_str48[sizeof("mainmenu")];
+    char kconf_id_strings_str51[sizeof("source")];
   };
 static struct kconf_id_strings_t kconf_id_strings_contents =
   {
@@ -136,25 +137,26 @@ static struct kconf_id_strings_t kconf_id_strings_contents =
     "default",
     "def_bool",
     "help",
-    "bool",
     "config",
     "def_tristate",
-    "boolean",
+    "hex",
     "defconfig_list",
-    "string",
     "if",
     "int",
-    "select",
     "modules",
     "tristate",
     "menu",
-    "source",
     "comment",
-    "hex",
     "menuconfig",
+    "string",
+    "visible",
     "prompt",
     "depends",
-    "mainmenu"
+    "bool",
+    "select",
+    "boolean",
+    "mainmenu",
+    "source"
   };
 #define kconf_id_strings ((const char *) &kconf_id_strings_contents)
 #ifdef __GNUC__
@@ -168,11 +170,11 @@ kconf_id_lookup (register const char *str, register unsigned int len)
 {
   enum
     {
-      TOTAL_KEYWORDS = 31,
+      TOTAL_KEYWORDS = 32,
       MIN_WORD_LENGTH = 2,
       MAX_WORD_LENGTH = 14,
       MIN_HASH_VALUE = 2,
-      MAX_HASH_VALUE = 48
+      MAX_HASH_VALUE = 51
     };
 
   static struct kconf_id wordlist[] =
@@ -191,31 +193,35 @@ kconf_id_lookup (register const char *str, register unsigned int len)
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str12,	T_DEFAULT,	TF_COMMAND, S_UNKNOWN},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str13,	T_DEFAULT,	TF_COMMAND, S_BOOLEAN},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str14,		T_HELP,		TF_COMMAND},
-      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str15,		T_TYPE,		TF_COMMAND, S_BOOLEAN},
+      {-1},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str16,		T_CONFIG,	TF_COMMAND},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str17,	T_DEFAULT,	TF_COMMAND, S_TRISTATE},
-      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18,	T_TYPE,		TF_COMMAND, S_BOOLEAN},
+      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18,		T_TYPE,		TF_COMMAND, S_HEX},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str19,	T_OPT_DEFCONFIG_LIST,TF_OPTION},
-      {-1},
-      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str21,		T_TYPE,		TF_COMMAND, S_STRING},
+      {-1}, {-1},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str22,		T_IF,		TF_COMMAND|TF_PARAM},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str23,		T_TYPE,		TF_COMMAND, S_INT},
-      {-1}, {-1},
-      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str26,		T_SELECT,	TF_COMMAND},
+      {-1}, {-1}, {-1},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str27,	T_OPT_MODULES,	TF_OPTION},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str28,	T_TYPE,		TF_COMMAND, S_TRISTATE},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str29,		T_MENU,		TF_COMMAND},
-      {-1},
-      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str31,		T_SOURCE,	TF_COMMAND},
+      {-1}, {-1},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str32,	T_COMMENT,	TF_COMMAND},
-      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str33,		T_TYPE,		TF_COMMAND, S_HEX},
-      {-1},
+      {-1}, {-1},
       {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str35,	T_MENUCONFIG,	TF_COMMAND},
-      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36,		T_PROMPT,	TF_COMMAND},
-      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37,	T_DEPENDS,	TF_COMMAND},
-      {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1},
+      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36,		T_TYPE,		TF_COMMAND, S_STRING},
+      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37,	T_VISIBLE,	TF_COMMAND},
+      {-1}, {-1}, {-1},
+      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str41,		T_PROMPT,	TF_COMMAND},
+      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str42,	T_DEPENDS,	TF_COMMAND},
       {-1},
-      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48,	T_MAINMENU,	TF_COMMAND}
+      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str44,		T_TYPE,		TF_COMMAND, S_BOOLEAN},
+      {-1},
+      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str46,		T_SELECT,	TF_COMMAND},
+      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str47,	T_TYPE,		TF_COMMAND, S_BOOLEAN},
+      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48,	T_MAINMENU,	TF_COMMAND},
+      {-1}, {-1},
+      {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str51,		T_SOURCE,	TF_COMMAND}
     };
 
   if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped
index 699d4b26518..4c5495ea205 100644
--- a/scripts/kconfig/zconf.tab.c_shipped
+++ b/scripts/kconfig/zconf.tab.c_shipped
@@ -160,18 +160,19 @@ static struct menu *current_menu, *current_entry;
      T_DEFAULT = 275,
      T_SELECT = 276,
      T_RANGE = 277,
-     T_OPTION = 278,
-     T_ON = 279,
-     T_WORD = 280,
-     T_WORD_QUOTE = 281,
-     T_UNEQUAL = 282,
-     T_CLOSE_PAREN = 283,
-     T_OPEN_PAREN = 284,
-     T_EOL = 285,
-     T_OR = 286,
-     T_AND = 287,
-     T_EQUAL = 288,
-     T_NOT = 289
+     T_VISIBLE = 278,
+     T_OPTION = 279,
+     T_ON = 280,
+     T_WORD = 281,
+     T_WORD_QUOTE = 282,
+     T_UNEQUAL = 283,
+     T_CLOSE_PAREN = 284,
+     T_OPEN_PAREN = 285,
+     T_EOL = 286,
+     T_OR = 287,
+     T_AND = 288,
+     T_EQUAL = 289,
+     T_NOT = 290
    };
 #endif
 
@@ -419,20 +420,20 @@ union yyalloc
 /* YYFINAL -- State number of the termination state.  */
 #define YYFINAL  11
 /* YYLAST -- Last index in YYTABLE.  */
-#define YYLAST   277
+#define YYLAST   290
 
 /* YYNTOKENS -- Number of terminals.  */
-#define YYNTOKENS  35
+#define YYNTOKENS  36
 /* YYNNTS -- Number of nonterminals.  */
-#define YYNNTS  48
+#define YYNNTS  50
 /* YYNRULES -- Number of rules.  */
-#define YYNRULES  113
+#define YYNRULES  118
 /* YYNRULES -- Number of states.  */
-#define YYNSTATES  185
+#define YYNSTATES  191
 
 /* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX.  */
 #define YYUNDEFTOK  2
-#define YYMAXUTOK   289
+#define YYMAXUTOK   290
 
 #define YYTRANSLATE(YYX)						\
   ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
@@ -468,7 +469,8 @@ static const yytype_uint8 yytranslate[] =
        2,     2,     2,     2,     2,     2,     1,     2,     3,     4,
        5,     6,     7,     8,     9,    10,    11,    12,    13,    14,
       15,    16,    17,    18,    19,    20,    21,    22,    23,    24,
-      25,    26,    27,    28,    29,    30,    31,    32,    33,    34
+      25,    26,    27,    28,    29,    30,    31,    32,    33,    34,
+      35
 };
 
 #if YYDEBUG
@@ -478,72 +480,73 @@ static const yytype_uint16 yyprhs[] =
 {
        0,     0,     3,     6,     8,    11,    13,    14,    17,    20,
       23,    26,    31,    36,    40,    42,    44,    46,    48,    50,
-      52,    54,    56,    58,    60,    62,    64,    66,    70,    73,
-      77,    80,    84,    87,    88,    91,    94,    97,   100,   103,
-     106,   110,   115,   120,   125,   131,   135,   136,   140,   141,
-     144,   148,   151,   153,   157,   158,   161,   164,   167,   170,
-     173,   178,   182,   185,   190,   191,   194,   198,   200,   204,
-     205,   208,   211,   214,   218,   222,   225,   227,   231,   232,
-     235,   238,   241,   245,   249,   252,   255,   258,   259,   262,
-     265,   268,   273,   274,   277,   279,   281,   284,   287,   290,
-     292,   295,   296,   299,   301,   305,   309,   313,   316,   320,
-     324,   326,   328,   329
+      52,    54,    56,    58,    60,    62,    64,    66,    68,    72,
+      75,    79,    82,    86,    89,    90,    93,    96,    99,   102,
+     105,   108,   112,   117,   122,   127,   133,   137,   138,   142,
+     143,   146,   150,   153,   155,   159,   160,   163,   166,   169,
+     172,   175,   180,   184,   187,   192,   193,   196,   200,   202,
+     206,   207,   210,   213,   216,   220,   224,   228,   230,   234,
+     235,   238,   241,   244,   248,   252,   255,   258,   261,   262,
+     265,   268,   271,   276,   277,   280,   283,   286,   287,   290,
+     292,   294,   297,   300,   303,   305,   308,   309,   312,   314,
+     318,   322,   326,   329,   333,   337,   339,   341,   342
 };
 
 /* YYRHS -- A `-1'-separated list of the rules' RHS.  */
 static const yytype_int8 yyrhs[] =
 {
-      36,     0,    -1,    78,    37,    -1,    37,    -1,    62,    38,
-      -1,    38,    -1,    -1,    38,    40,    -1,    38,    54,    -1,
-      38,    66,    -1,    38,    77,    -1,    38,    25,     1,    30,
-      -1,    38,    39,     1,    30,    -1,    38,     1,    30,    -1,
+      37,     0,    -1,    81,    38,    -1,    38,    -1,    63,    39,
+      -1,    39,    -1,    -1,    39,    41,    -1,    39,    55,    -1,
+      39,    67,    -1,    39,    80,    -1,    39,    26,     1,    31,
+      -1,    39,    40,     1,    31,    -1,    39,     1,    31,    -1,
       16,    -1,    18,    -1,    19,    -1,    21,    -1,    17,    -1,
-      22,    -1,    20,    -1,    30,    -1,    60,    -1,    70,    -1,
-      43,    -1,    45,    -1,    68,    -1,    25,     1,    30,    -1,
-       1,    30,    -1,    10,    25,    30,    -1,    42,    46,    -1,
-      11,    25,    30,    -1,    44,    46,    -1,    -1,    46,    47,
-      -1,    46,    48,    -1,    46,    74,    -1,    46,    72,    -1,
-      46,    41,    -1,    46,    30,    -1,    19,    75,    30,    -1,
-      18,    76,    79,    30,    -1,    20,    80,    79,    30,    -1,
-      21,    25,    79,    30,    -1,    22,    81,    81,    79,    30,
-      -1,    23,    49,    30,    -1,    -1,    49,    25,    50,    -1,
-      -1,    33,    76,    -1,     7,    82,    30,    -1,    51,    55,
-      -1,    77,    -1,    52,    57,    53,    -1,    -1,    55,    56,
-      -1,    55,    74,    -1,    55,    72,    -1,    55,    30,    -1,
-      55,    41,    -1,    18,    76,    79,    30,    -1,    19,    75,
-      30,    -1,    17,    30,    -1,    20,    25,    79,    30,    -1,
-      -1,    57,    40,    -1,    14,    80,    78,    -1,    77,    -1,
-      58,    61,    59,    -1,    -1,    61,    40,    -1,    61,    66,
-      -1,    61,    54,    -1,     3,    76,    78,    -1,     4,    76,
-      30,    -1,    63,    73,    -1,    77,    -1,    64,    67,    65,
-      -1,    -1,    67,    40,    -1,    67,    66,    -1,    67,    54,
-      -1,     6,    76,    30,    -1,     9,    76,    30,    -1,    69,
-      73,    -1,    12,    30,    -1,    71,    13,    -1,    -1,    73,
-      74,    -1,    73,    30,    -1,    73,    41,    -1,    16,    24,
-      80,    30,    -1,    -1,    76,    79,    -1,    25,    -1,    26,
-      -1,     5,    30,    -1,     8,    30,    -1,    15,    30,    -1,
-      30,    -1,    78,    30,    -1,    -1,    14,    80,    -1,    81,
-      -1,    81,    33,    81,    -1,    81,    27,    81,    -1,    29,
-      80,    28,    -1,    34,    80,    -1,    80,    31,    80,    -1,
-      80,    32,    80,    -1,    25,    -1,    26,    -1,    -1,    25,
-      -1
+      22,    -1,    20,    -1,    23,    -1,    31,    -1,    61,    -1,
+      71,    -1,    44,    -1,    46,    -1,    69,    -1,    26,     1,
+      31,    -1,     1,    31,    -1,    10,    26,    31,    -1,    43,
+      47,    -1,    11,    26,    31,    -1,    45,    47,    -1,    -1,
+      47,    48,    -1,    47,    49,    -1,    47,    75,    -1,    47,
+      73,    -1,    47,    42,    -1,    47,    31,    -1,    19,    78,
+      31,    -1,    18,    79,    82,    31,    -1,    20,    83,    82,
+      31,    -1,    21,    26,    82,    31,    -1,    22,    84,    84,
+      82,    31,    -1,    24,    50,    31,    -1,    -1,    50,    26,
+      51,    -1,    -1,    34,    79,    -1,     7,    85,    31,    -1,
+      52,    56,    -1,    80,    -1,    53,    58,    54,    -1,    -1,
+      56,    57,    -1,    56,    75,    -1,    56,    73,    -1,    56,
+      31,    -1,    56,    42,    -1,    18,    79,    82,    31,    -1,
+      19,    78,    31,    -1,    17,    31,    -1,    20,    26,    82,
+      31,    -1,    -1,    58,    41,    -1,    14,    83,    81,    -1,
+      80,    -1,    59,    62,    60,    -1,    -1,    62,    41,    -1,
+      62,    67,    -1,    62,    55,    -1,     3,    79,    81,    -1,
+       4,    79,    31,    -1,    64,    76,    74,    -1,    80,    -1,
+      65,    68,    66,    -1,    -1,    68,    41,    -1,    68,    67,
+      -1,    68,    55,    -1,     6,    79,    31,    -1,     9,    79,
+      31,    -1,    70,    74,    -1,    12,    31,    -1,    72,    13,
+      -1,    -1,    74,    75,    -1,    74,    31,    -1,    74,    42,
+      -1,    16,    25,    83,    31,    -1,    -1,    76,    77,    -1,
+      76,    31,    -1,    23,    82,    -1,    -1,    79,    82,    -1,
+      26,    -1,    27,    -1,     5,    31,    -1,     8,    31,    -1,
+      15,    31,    -1,    31,    -1,    81,    31,    -1,    -1,    14,
+      83,    -1,    84,    -1,    84,    34,    84,    -1,    84,    28,
+      84,    -1,    30,    83,    29,    -1,    35,    83,    -1,    83,
+      32,    83,    -1,    83,    33,    83,    -1,    26,    -1,    27,
+      -1,    -1,    26,    -1
 };
 
 /* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
 static const yytype_uint16 yyrline[] =
 {
-       0,   107,   107,   107,   109,   109,   111,   113,   114,   115,
-     116,   117,   118,   122,   126,   126,   126,   126,   126,   126,
-     126,   130,   131,   132,   133,   134,   135,   139,   140,   146,
-     154,   160,   168,   178,   180,   181,   182,   183,   184,   185,
-     188,   196,   202,   212,   218,   224,   227,   229,   240,   241,
-     246,   255,   260,   268,   271,   273,   274,   275,   276,   277,
-     280,   286,   297,   303,   313,   315,   320,   328,   336,   339,
-     341,   342,   343,   348,   355,   362,   367,   375,   378,   380,
-     381,   382,   385,   393,   400,   407,   413,   420,   422,   423,
-     424,   427,   435,   437,   442,   443,   446,   447,   448,   452,
-     453,   456,   457,   460,   461,   462,   463,   464,   465,   466,
-     469,   470,   473,   474
+       0,   108,   108,   108,   110,   110,   112,   114,   115,   116,
+     117,   118,   119,   123,   127,   127,   127,   127,   127,   127,
+     127,   127,   131,   132,   133,   134,   135,   136,   140,   141,
+     147,   155,   161,   169,   179,   181,   182,   183,   184,   185,
+     186,   189,   197,   203,   213,   219,   225,   228,   230,   241,
+     242,   247,   256,   261,   269,   272,   274,   275,   276,   277,
+     278,   281,   287,   298,   304,   314,   316,   321,   329,   337,
+     340,   342,   343,   344,   349,   356,   363,   368,   376,   379,
+     381,   382,   383,   386,   394,   401,   408,   414,   421,   423,
+     424,   425,   428,   436,   438,   439,   442,   449,   451,   456,
+     457,   460,   461,   462,   466,   467,   470,   471,   474,   475,
+     476,   477,   478,   479,   480,   483,   484,   487,   488
 };
 #endif
 
@@ -556,7 +559,7 @@ static const char *const yytname[] =
   "T_SOURCE", "T_CHOICE", "T_ENDCHOICE", "T_COMMENT", "T_CONFIG",
   "T_MENUCONFIG", "T_HELP", "T_HELPTEXT", "T_IF", "T_ENDIF", "T_DEPENDS",
   "T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", "T_SELECT", "T_RANGE",
-  "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL",
+  "T_VISIBLE", "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL",
   "T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL",
   "T_NOT", "$accept", "input", "start", "stmt_list", "option_name",
   "common_stmt", "option_error", "config_entry_start", "config_stmt",
@@ -567,8 +570,8 @@ static const char *const yytname[] =
   "if_entry", "if_end", "if_stmt", "if_block", "mainmenu_stmt", "menu",
   "menu_entry", "menu_end", "menu_stmt", "menu_block", "source_stmt",
   "comment", "comment_stmt", "help_start", "help", "depends_list",
-  "depends", "prompt_stmt_opt", "prompt", "end", "nl", "if_expr", "expr",
-  "symbol", "word_opt", 0
+  "depends", "visibility_list", "visible", "prompt_stmt_opt", "prompt",
+  "end", "nl", "if_expr", "expr", "symbol", "word_opt", 0
 };
 #endif
 
@@ -580,25 +583,25 @@ static const yytype_uint16 yytoknum[] =
        0,   256,   257,   258,   259,   260,   261,   262,   263,   264,
      265,   266,   267,   268,   269,   270,   271,   272,   273,   274,
      275,   276,   277,   278,   279,   280,   281,   282,   283,   284,
-     285,   286,   287,   288,   289
+     285,   286,   287,   288,   289,   290
 };
 # endif
 
 /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives.  */
 static const yytype_uint8 yyr1[] =
 {
-       0,    35,    36,    36,    37,    37,    38,    38,    38,    38,
-      38,    38,    38,    38,    39,    39,    39,    39,    39,    39,
-      39,    40,    40,    40,    40,    40,    40,    41,    41,    42,
-      43,    44,    45,    46,    46,    46,    46,    46,    46,    46,
-      47,    47,    47,    47,    47,    48,    49,    49,    50,    50,
-      51,    52,    53,    54,    55,    55,    55,    55,    55,    55,
-      56,    56,    56,    56,    57,    57,    58,    59,    60,    61,
-      61,    61,    61,    62,    63,    64,    65,    66,    67,    67,
-      67,    67,    68,    69,    70,    71,    72,    73,    73,    73,
-      73,    74,    75,    75,    76,    76,    77,    77,    77,    78,
-      78,    79,    79,    80,    80,    80,    80,    80,    80,    80,
-      81,    81,    82,    82
+       0,    36,    37,    37,    38,    38,    39,    39,    39,    39,
+      39,    39,    39,    39,    40,    40,    40,    40,    40,    40,
+      40,    40,    41,    41,    41,    41,    41,    41,    42,    42,
+      43,    44,    45,    46,    47,    47,    47,    47,    47,    47,
+      47,    48,    48,    48,    48,    48,    49,    50,    50,    51,
+      51,    52,    53,    54,    55,    56,    56,    56,    56,    56,
+      56,    57,    57,    57,    57,    58,    58,    59,    60,    61,
+      62,    62,    62,    62,    63,    64,    65,    66,    67,    68,
+      68,    68,    68,    69,    70,    71,    72,    73,    74,    74,
+      74,    74,    75,    76,    76,    76,    77,    78,    78,    79,
+      79,    80,    80,    80,    81,    81,    82,    82,    83,    83,
+      83,    83,    83,    83,    83,    84,    84,    85,    85
 };
 
 /* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN.  */
@@ -606,16 +609,16 @@ static const yytype_uint8 yyr2[] =
 {
        0,     2,     2,     1,     2,     1,     0,     2,     2,     2,
        2,     4,     4,     3,     1,     1,     1,     1,     1,     1,
-       1,     1,     1,     1,     1,     1,     1,     3,     2,     3,
-       2,     3,     2,     0,     2,     2,     2,     2,     2,     2,
-       3,     4,     4,     4,     5,     3,     0,     3,     0,     2,
-       3,     2,     1,     3,     0,     2,     2,     2,     2,     2,
-       4,     3,     2,     4,     0,     2,     3,     1,     3,     0,
-       2,     2,     2,     3,     3,     2,     1,     3,     0,     2,
-       2,     2,     3,     3,     2,     2,     2,     0,     2,     2,
-       2,     4,     0,     2,     1,     1,     2,     2,     2,     1,
-       2,     0,     2,     1,     3,     3,     3,     2,     3,     3,
-       1,     1,     0,     1
+       1,     1,     1,     1,     1,     1,     1,     1,     3,     2,
+       3,     2,     3,     2,     0,     2,     2,     2,     2,     2,
+       2,     3,     4,     4,     4,     5,     3,     0,     3,     0,
+       2,     3,     2,     1,     3,     0,     2,     2,     2,     2,
+       2,     4,     3,     2,     4,     0,     2,     3,     1,     3,
+       0,     2,     2,     2,     3,     3,     3,     1,     3,     0,
+       2,     2,     2,     3,     3,     2,     2,     2,     0,     2,
+       2,     2,     4,     0,     2,     2,     2,     0,     2,     1,
+       1,     2,     2,     2,     1,     2,     0,     2,     1,     3,
+       3,     3,     2,     3,     3,     1,     1,     0,     1
 };
 
 /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
@@ -623,165 +626,172 @@ static const yytype_uint8 yyr2[] =
    means the default is an error.  */
 static const yytype_uint8 yydefact[] =
 {
-       6,     0,    99,     0,     3,     0,     6,     6,    94,    95,
-       0,     1,     0,     0,     0,     0,   112,     0,     0,     0,
+       6,     0,   104,     0,     3,     0,     6,     6,    99,   100,
+       0,     1,     0,     0,     0,     0,   117,     0,     0,     0,
        0,     0,     0,    14,    18,    15,    16,    20,    17,    19,
-       0,    21,     0,     7,    33,    24,    33,    25,    54,    64,
-       8,    69,    22,    87,    78,     9,    26,    87,    23,    10,
-       0,   100,     2,    73,    13,     0,    96,     0,   113,     0,
-      97,     0,     0,     0,   110,   111,     0,     0,     0,   103,
-      98,     0,     0,     0,     0,     0,     0,     0,     0,     0,
-       0,    74,    82,    50,    83,    29,    31,     0,   107,     0,
-       0,    66,     0,     0,    11,    12,     0,     0,     0,     0,
-      92,     0,     0,     0,    46,     0,    39,    38,    34,    35,
-       0,    37,    36,     0,     0,    92,     0,    58,    59,    55,
-      57,    56,    65,    53,    52,    70,    72,    68,    71,    67,
-      89,    90,    88,    79,    81,    77,    80,    76,   106,   108,
-     109,   105,   104,    28,    85,     0,   101,     0,   101,   101,
-     101,     0,     0,     0,    86,    62,   101,     0,   101,     0,
-       0,     0,    40,    93,     0,     0,   101,    48,    45,    27,
-       0,    61,     0,    91,   102,    41,    42,    43,     0,     0,
-      47,    60,    63,    44,    49
+      21,     0,    22,     0,     7,    34,    25,    34,    26,    55,
+      65,     8,    70,    23,    93,    79,     9,    27,    88,    24,
+      10,     0,   105,     2,    74,    13,     0,   101,     0,   118,
+       0,   102,     0,     0,     0,   115,   116,     0,     0,     0,
+     108,   103,     0,     0,     0,     0,     0,     0,     0,    88,
+       0,     0,    75,    83,    51,    84,    30,    32,     0,   112,
+       0,     0,    67,     0,     0,    11,    12,     0,     0,     0,
+       0,    97,     0,     0,     0,    47,     0,    40,    39,    35,
+      36,     0,    38,    37,     0,     0,    97,     0,    59,    60,
+      56,    58,    57,    66,    54,    53,    71,    73,    69,    72,
+      68,   106,    95,     0,    94,    80,    82,    78,    81,    77,
+      90,    91,    89,   111,   113,   114,   110,   109,    29,    86,
+       0,   106,     0,   106,   106,   106,     0,     0,     0,    87,
+      63,   106,     0,   106,     0,    96,     0,     0,    41,    98,
+       0,     0,   106,    49,    46,    28,     0,    62,     0,   107,
+      92,    42,    43,    44,     0,     0,    48,    61,    64,    45,
+      50
 };
 
 /* YYDEFGOTO[NTERM-NUM].  */
 static const yytype_int16 yydefgoto[] =
 {
-      -1,     3,     4,     5,    32,    33,   107,    34,    35,    36,
-      37,    73,   108,   109,   152,   180,    38,    39,   123,    40,
-      75,   119,    76,    41,   127,    42,    77,     6,    43,    44,
-     135,    45,    79,    46,    47,    48,   110,   111,    78,   112,
-     147,   148,    49,     7,   161,    68,    69,    59
+      -1,     3,     4,     5,    33,    34,   108,    35,    36,    37,
+      38,    74,   109,   110,   157,   186,    39,    40,   124,    41,
+      76,   120,    77,    42,   128,    43,    78,     6,    44,    45,
+     137,    46,    80,    47,    48,    49,   111,   112,    81,   113,
+      79,   134,   152,   153,    50,     7,   165,    69,    70,    60
 };
 
 /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
    STATE-NUM.  */
-#define YYPACT_NINF -89
+#define YYPACT_NINF -90
 static const yytype_int16 yypact[] =
 {
-       3,     4,   -89,    20,   -89,   100,   -89,     7,   -89,   -89,
-      -8,   -89,    17,     4,    28,     4,    37,    36,     4,    68,
-      87,   -18,    69,   -89,   -89,   -89,   -89,   -89,   -89,   -89,
-     128,   -89,   138,   -89,   -89,   -89,   -89,   -89,   -89,   -89,
-     -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,
-     127,   -89,   -89,   110,   -89,   126,   -89,   136,   -89,   137,
-     -89,   147,   150,   152,   -89,   -89,   -18,   -18,   171,   -14,
-     -89,   153,   157,    34,    67,   180,   233,   220,   207,   220,
-     154,   -89,   -89,   -89,   -89,   -89,   -89,     0,   -89,   -18,
-     -18,   110,    44,    44,   -89,   -89,   163,   174,   182,     4,
-       4,   -18,   194,    44,   -89,   219,   -89,   -89,   -89,   -89,
-     223,   -89,   -89,   203,     4,     4,   215,   -89,   -89,   -89,
-     -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,
-     -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,   213,
-     -89,   -89,   -89,   -89,   -89,   -18,   232,   227,   232,    -5,
-     232,    44,    35,   234,   -89,   -89,   232,   235,   232,   224,
-     -18,   236,   -89,   -89,   237,   238,   232,   216,   -89,   -89,
-     240,   -89,   241,   -89,    71,   -89,   -89,   -89,   242,     4,
-     -89,   -89,   -89,   -89,   -89
+       4,    42,   -90,    96,   -90,   111,   -90,    15,   -90,   -90,
+      75,   -90,    82,    42,   104,    42,   110,   107,    42,   115,
+     125,    -4,   121,   -90,   -90,   -90,   -90,   -90,   -90,   -90,
+     -90,   162,   -90,   163,   -90,   -90,   -90,   -90,   -90,   -90,
+     -90,   -90,   -90,   -90,   -90,   -90,   -90,   -90,   -90,   -90,
+     -90,   139,   -90,   -90,   138,   -90,   142,   -90,   143,   -90,
+     152,   -90,   164,   167,   168,   -90,   -90,    -4,    -4,    77,
+     -18,   -90,   177,   185,    33,    71,   195,   247,   236,    -2,
+     236,   171,   -90,   -90,   -90,   -90,   -90,   -90,    41,   -90,
+      -4,    -4,   138,    97,    97,   -90,   -90,   186,   187,   194,
+      42,    42,    -4,   196,    97,   -90,   219,   -90,   -90,   -90,
+     -90,   210,   -90,   -90,   204,    42,    42,   199,   -90,   -90,
+     -90,   -90,   -90,   -90,   -90,   -90,   -90,   -90,   -90,   -90,
+     -90,   222,   -90,   223,   -90,   -90,   -90,   -90,   -90,   -90,
+     -90,   -90,   -90,   -90,   215,   -90,   -90,   -90,   -90,   -90,
+      -4,   222,   228,   222,    -5,   222,    97,    35,   229,   -90,
+     -90,   222,   232,   222,    -4,   -90,   135,   233,   -90,   -90,
+     234,   235,   222,   240,   -90,   -90,   237,   -90,   239,   -13,
+     -90,   -90,   -90,   -90,   244,    42,   -90,   -90,   -90,   -90,
+     -90
 };
 
 /* YYPGOTO[NTERM-NUM].  */
 static const yytype_int16 yypgoto[] =
 {
-     -89,   -89,   255,   267,   -89,    47,   -57,   -89,   -89,   -89,
-     -89,   239,   -89,   -89,   -89,   -89,   -89,   -89,   -89,   130,
-     -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,   -89,
-     -89,   181,   -89,   -89,   -89,   -89,   -89,   199,   229,    16,
-     162,    -1,    74,    -7,   103,   -65,   -88,   -89
+     -90,   -90,   269,   271,   -90,    23,   -70,   -90,   -90,   -90,
+     -90,   243,   -90,   -90,   -90,   -90,   -90,   -90,   -90,   -48,
+     -90,   -90,   -90,   -90,   -90,   -90,   -90,   -90,   -90,   -90,
+     -90,   -20,   -90,   -90,   -90,   -90,   -90,   206,   205,   -68,
+     -90,   -90,   169,    -1,    27,    -7,   118,   -66,   -89,   -90
 };
 
 /* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
    positive, shift that token.  If negative, reduce the rule which
    number is the opposite.  If zero, do what YYDEFACT says.
    If YYTABLE_NINF, syntax error.  */
-#define YYTABLE_NINF -85
+#define YYTABLE_NINF -86
 static const yytype_int16 yytable[] =
 {
-      10,    87,    88,    53,   141,   142,     1,    64,    65,   160,
-       1,    66,    55,    92,    57,   151,    67,    61,   118,    93,
-      11,   131,     2,   131,   139,   140,    89,    90,   138,     8,
-       9,    89,    90,     2,   -30,    96,   149,    51,   -30,   -30,
-     -30,   -30,   -30,   -30,   -30,   -30,    97,    54,   -30,   -30,
-      98,   -30,    99,   100,   101,   102,   103,   104,    56,   105,
-     167,    91,    58,   166,   106,   168,    60,   -32,    96,    64,
-      65,   -32,   -32,   -32,   -32,   -32,   -32,   -32,   -32,    97,
-     159,   -32,   -32,    98,   -32,    99,   100,   101,   102,   103,
-     104,   121,   105,    62,   132,   174,   132,   106,   146,    70,
-      -5,    12,    89,    90,    13,    14,    15,    16,    17,    18,
-      19,    20,    63,   156,    21,    22,    23,    24,    25,    26,
-      27,    28,    29,   122,   125,    30,   133,    -4,    12,    71,
-      31,    13,    14,    15,    16,    17,    18,    19,    20,    72,
-      51,    21,    22,    23,    24,    25,    26,    27,    28,    29,
-     124,   129,    30,   137,   -84,    96,    81,    31,   -84,   -84,
-     -84,   -84,   -84,   -84,   -84,   -84,    82,    83,   -84,   -84,
-      98,   -84,   -84,   -84,   -84,   -84,   -84,    84,   184,   105,
-      85,    96,    86,    94,   130,   -51,   -51,    95,   -51,   -51,
-     -51,   -51,    97,   143,   -51,   -51,    98,   113,   114,   115,
-     116,     2,    89,    90,   144,   105,   145,   126,    96,   134,
-     117,   -75,   -75,   -75,   -75,   -75,   -75,   -75,   -75,   150,
-     153,   -75,   -75,    98,    13,    14,    15,    16,    17,    18,
-      19,    20,   105,   155,    21,    22,   154,   130,    14,    15,
-     158,    17,    18,    19,    20,    90,   160,    21,    22,   179,
-      31,   163,   164,   165,   173,    89,    90,   162,   128,   170,
-     136,   172,    52,    31,   169,   171,   175,   176,   177,   178,
-     181,   182,   183,    50,   120,    74,    80,   157
+      10,    88,    89,    54,   146,   147,   119,     1,   122,   164,
+      93,   141,    56,   142,    58,   156,    94,    62,     1,    90,
+      91,   131,    65,    66,   144,   145,    67,    90,    91,   132,
+     127,    68,   136,   -31,    97,     2,   154,   -31,   -31,   -31,
+     -31,   -31,   -31,   -31,   -31,    98,    52,   -31,   -31,    99,
+     -31,   100,   101,   102,   103,   104,   -31,   105,   129,   106,
+     138,   173,    92,   141,   107,   142,   174,   172,     8,     9,
+     143,   -33,    97,    90,    91,   -33,   -33,   -33,   -33,   -33,
+     -33,   -33,   -33,    98,   166,   -33,   -33,    99,   -33,   100,
+     101,   102,   103,   104,   -33,   105,    11,   106,   179,   151,
+     123,   126,   107,   135,   125,   130,     2,   139,     2,    90,
+      91,    -5,    12,    55,   161,    13,    14,    15,    16,    17,
+      18,    19,    20,    65,    66,    21,    22,    23,    24,    25,
+      26,    27,    28,    29,    30,    57,    59,    31,    61,    -4,
+      12,    63,    32,    13,    14,    15,    16,    17,    18,    19,
+      20,    64,    71,    21,    22,    23,    24,    25,    26,    27,
+      28,    29,    30,    72,    73,    31,   180,    90,    91,    52,
+      32,   -85,    97,    82,    83,   -85,   -85,   -85,   -85,   -85,
+     -85,   -85,   -85,    84,   190,   -85,   -85,    99,   -85,   -85,
+     -85,   -85,   -85,   -85,   -85,    85,    97,   106,    86,    87,
+     -52,   -52,   140,   -52,   -52,   -52,   -52,    98,    95,   -52,
+     -52,    99,   114,   115,   116,   117,    96,   148,   149,   150,
+     158,   106,   155,   159,    97,   163,   118,   -76,   -76,   -76,
+     -76,   -76,   -76,   -76,   -76,   160,   164,   -76,   -76,    99,
+      13,    14,    15,    16,    17,    18,    19,    20,    91,   106,
+      21,    22,    14,    15,   140,    17,    18,    19,    20,   168,
+     175,    21,    22,   177,   181,   182,   183,    32,   187,   167,
+     188,   169,   170,   171,   185,   189,    53,    51,    32,   176,
+      75,   178,   121,     0,   133,   162,     0,     0,     0,     0,
+     184
 };
 
-static const yytype_uint8 yycheck[] =
+static const yytype_int16 yycheck[] =
 {
-       1,    66,    67,    10,    92,    93,     3,    25,    26,    14,
-       3,    29,    13,    27,    15,   103,    34,    18,    75,    33,
-       0,    78,    30,    80,    89,    90,    31,    32,    28,    25,
-      26,    31,    32,    30,     0,     1,   101,    30,     4,     5,
-       6,     7,     8,     9,    10,    11,    12,    30,    14,    15,
-      16,    17,    18,    19,    20,    21,    22,    23,    30,    25,
-      25,    68,    25,   151,    30,    30,    30,     0,     1,    25,
-      26,     4,     5,     6,     7,     8,     9,    10,    11,    12,
-     145,    14,    15,    16,    17,    18,    19,    20,    21,    22,
-      23,    75,    25,    25,    78,   160,    80,    30,    99,    30,
-       0,     1,    31,    32,     4,     5,     6,     7,     8,     9,
-      10,    11,    25,   114,    14,    15,    16,    17,    18,    19,
-      20,    21,    22,    76,    77,    25,    79,     0,     1,     1,
-      30,     4,     5,     6,     7,     8,     9,    10,    11,     1,
-      30,    14,    15,    16,    17,    18,    19,    20,    21,    22,
-      76,    77,    25,    79,     0,     1,    30,    30,     4,     5,
-       6,     7,     8,     9,    10,    11,    30,    30,    14,    15,
-      16,    17,    18,    19,    20,    21,    22,    30,   179,    25,
-      30,     1,    30,    30,    30,     5,     6,    30,     8,     9,
-      10,    11,    12,    30,    14,    15,    16,    17,    18,    19,
-      20,    30,    31,    32,    30,    25,    24,    77,     1,    79,
-      30,     4,     5,     6,     7,     8,     9,    10,    11,    25,
-       1,    14,    15,    16,     4,     5,     6,     7,     8,     9,
-      10,    11,    25,    30,    14,    15,    13,    30,     5,     6,
-      25,     8,     9,    10,    11,    32,    14,    14,    15,    33,
-      30,   148,   149,   150,    30,    31,    32,    30,    77,   156,
-      79,   158,     7,    30,    30,    30,    30,    30,    30,   166,
-      30,    30,    30,     6,    75,    36,    47,   115
+       1,    67,    68,    10,    93,    94,    76,     3,    76,    14,
+      28,    81,    13,    81,    15,   104,    34,    18,     3,    32,
+      33,    23,    26,    27,    90,    91,    30,    32,    33,    31,
+      78,    35,    80,     0,     1,    31,   102,     4,     5,     6,
+       7,     8,     9,    10,    11,    12,    31,    14,    15,    16,
+      17,    18,    19,    20,    21,    22,    23,    24,    78,    26,
+      80,    26,    69,   133,    31,   133,    31,   156,    26,    27,
+      29,     0,     1,    32,    33,     4,     5,     6,     7,     8,
+       9,    10,    11,    12,   150,    14,    15,    16,    17,    18,
+      19,    20,    21,    22,    23,    24,     0,    26,   164,   100,
+      77,    78,    31,    80,    77,    78,    31,    80,    31,    32,
+      33,     0,     1,    31,   115,     4,     5,     6,     7,     8,
+       9,    10,    11,    26,    27,    14,    15,    16,    17,    18,
+      19,    20,    21,    22,    23,    31,    26,    26,    31,     0,
+       1,    26,    31,     4,     5,     6,     7,     8,     9,    10,
+      11,    26,    31,    14,    15,    16,    17,    18,    19,    20,
+      21,    22,    23,     1,     1,    26,    31,    32,    33,    31,
+      31,     0,     1,    31,    31,     4,     5,     6,     7,     8,
+       9,    10,    11,    31,   185,    14,    15,    16,    17,    18,
+      19,    20,    21,    22,    23,    31,     1,    26,    31,    31,
+       5,     6,    31,     8,     9,    10,    11,    12,    31,    14,
+      15,    16,    17,    18,    19,    20,    31,    31,    31,    25,
+       1,    26,    26,    13,     1,    26,    31,     4,     5,     6,
+       7,     8,     9,    10,    11,    31,    14,    14,    15,    16,
+       4,     5,     6,     7,     8,     9,    10,    11,    33,    26,
+      14,    15,     5,     6,    31,     8,     9,    10,    11,    31,
+      31,    14,    15,    31,    31,    31,    31,    31,    31,   151,
+      31,   153,   154,   155,    34,    31,     7,     6,    31,   161,
+      37,   163,    76,    -1,    79,   116,    -1,    -1,    -1,    -1,
+     172
 };
 
 /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
    symbol of state STATE-NUM.  */
 static const yytype_uint8 yystos[] =
 {
-       0,     3,    30,    36,    37,    38,    62,    78,    25,    26,
-      76,     0,     1,     4,     5,     6,     7,     8,     9,    10,
+       0,     3,    31,    37,    38,    39,    63,    81,    26,    27,
+      79,     0,     1,     4,     5,     6,     7,     8,     9,    10,
       11,    14,    15,    16,    17,    18,    19,    20,    21,    22,
-      25,    30,    39,    40,    42,    43,    44,    45,    51,    52,
-      54,    58,    60,    63,    64,    66,    68,    69,    70,    77,
-      38,    30,    37,    78,    30,    76,    30,    76,    25,    82,
-      30,    76,    25,    25,    25,    26,    29,    34,    80,    81,
-      30,     1,     1,    46,    46,    55,    57,    61,    73,    67,
-      73,    30,    30,    30,    30,    30,    30,    80,    80,    31,
-      32,    78,    27,    33,    30,    30,     1,    12,    16,    18,
-      19,    20,    21,    22,    23,    25,    30,    41,    47,    48,
-      71,    72,    74,    17,    18,    19,    20,    30,    41,    56,
-      72,    74,    40,    53,    77,    40,    54,    59,    66,    77,
-      30,    41,    74,    40,    54,    65,    66,    77,    28,    80,
-      80,    81,    81,    30,    30,    24,    76,    75,    76,    80,
-      25,    81,    49,     1,    13,    30,    76,    75,    25,    80,
-      14,    79,    30,    79,    79,    79,    81,    25,    30,    30,
-      79,    30,    79,    30,    80,    30,    30,    30,    79,    33,
-      50,    30,    30,    30,    76
+      23,    26,    31,    40,    41,    43,    44,    45,    46,    52,
+      53,    55,    59,    61,    64,    65,    67,    69,    70,    71,
+      80,    39,    31,    38,    81,    31,    79,    31,    79,    26,
+      85,    31,    79,    26,    26,    26,    27,    30,    35,    83,
+      84,    31,     1,     1,    47,    47,    56,    58,    62,    76,
+      68,    74,    31,    31,    31,    31,    31,    31,    83,    83,
+      32,    33,    81,    28,    34,    31,    31,     1,    12,    16,
+      18,    19,    20,    21,    22,    24,    26,    31,    42,    48,
+      49,    72,    73,    75,    17,    18,    19,    20,    31,    42,
+      57,    73,    75,    41,    54,    80,    41,    55,    60,    67,
+      80,    23,    31,    74,    77,    41,    55,    66,    67,    80,
+      31,    42,    75,    29,    83,    83,    84,    84,    31,    31,
+      25,    79,    78,    79,    83,    26,    84,    50,     1,    13,
+      31,    79,    78,    26,    14,    82,    83,    82,    31,    82,
+      82,    82,    84,    26,    31,    31,    82,    31,    82,    83,
+      31,    31,    31,    31,    82,    34,    51,    31,    31,    31,
+      79
 };
 
 #define yyerrok		(yyerrstatus = 0)
@@ -1292,7 +1302,7 @@ yydestruct (yymsg, yytype, yyvaluep)
 
   switch (yytype)
     {
-      case 52: /* "choice_entry" */
+      case 53: /* "choice_entry" */
 
 	{
 	fprintf(stderr, "%s:%d: missing end statement for this entry\n",
@@ -1302,7 +1312,7 @@ yydestruct (yymsg, yytype, yyvaluep)
 };
 
 	break;
-      case 58: /* "if_entry" */
+      case 59: /* "if_entry" */
 
 	{
 	fprintf(stderr, "%s:%d: missing end statement for this entry\n",
@@ -1312,7 +1322,7 @@ yydestruct (yymsg, yytype, yyvaluep)
 };
 
 	break;
-      case 64: /* "menu_entry" */
+      case 65: /* "menu_entry" */
 
 	{
 	fprintf(stderr, "%s:%d: missing end statement for this entry\n",
@@ -1644,17 +1654,17 @@ yyreduce:
     { zconf_error("invalid statement"); ;}
     break;
 
-  case 27:
+  case 28:
 
     { zconf_error("unknown option \"%s\"", (yyvsp[(1) - (3)].string)); ;}
     break;
 
-  case 28:
+  case 29:
 
     { zconf_error("invalid option"); ;}
     break;
 
-  case 29:
+  case 30:
 
     {
 	struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
@@ -1664,7 +1674,7 @@ yyreduce:
 ;}
     break;
 
-  case 30:
+  case 31:
 
     {
 	menu_end_entry();
@@ -1672,7 +1682,7 @@ yyreduce:
 ;}
     break;
 
-  case 31:
+  case 32:
 
     {
 	struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
@@ -1682,7 +1692,7 @@ yyreduce:
 ;}
     break;
 
-  case 32:
+  case 33:
 
     {
 	if (current_entry->prompt)
@@ -1694,7 +1704,7 @@ yyreduce:
 ;}
     break;
 
-  case 40:
+  case 41:
 
     {
 	menu_set_type((yyvsp[(1) - (3)].id)->stype);
@@ -1704,7 +1714,7 @@ yyreduce:
 ;}
     break;
 
-  case 41:
+  case 42:
 
     {
 	menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
@@ -1712,7 +1722,7 @@ yyreduce:
 ;}
     break;
 
-  case 42:
+  case 43:
 
     {
 	menu_add_expr(P_DEFAULT, (yyvsp[(2) - (4)].expr), (yyvsp[(3) - (4)].expr));
@@ -1724,7 +1734,7 @@ yyreduce:
 ;}
     break;
 
-  case 43:
+  case 44:
 
     {
 	menu_add_symbol(P_SELECT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr));
@@ -1732,7 +1742,7 @@ yyreduce:
 ;}
     break;
 
-  case 44:
+  case 45:
 
     {
 	menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[(2) - (5)].symbol), (yyvsp[(3) - (5)].symbol)), (yyvsp[(4) - (5)].expr));
@@ -1740,7 +1750,7 @@ yyreduce:
 ;}
     break;
 
-  case 47:
+  case 48:
 
     {
 	struct kconf_id *id = kconf_id_lookup((yyvsp[(2) - (3)].string), strlen((yyvsp[(2) - (3)].string)));
@@ -1752,17 +1762,17 @@ yyreduce:
 ;}
     break;
 
-  case 48:
+  case 49:
 
     { (yyval.string) = NULL; ;}
     break;
 
-  case 49:
+  case 50:
 
     { (yyval.string) = (yyvsp[(2) - (2)].string); ;}
     break;
 
-  case 50:
+  case 51:
 
     {
 	struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), SYMBOL_CHOICE);
@@ -1773,14 +1783,14 @@ yyreduce:
 ;}
     break;
 
-  case 51:
+  case 52:
 
     {
 	(yyval.menu) = menu_add_menu();
 ;}
     break;
 
-  case 52:
+  case 53:
 
     {
 	if (zconf_endtoken((yyvsp[(1) - (1)].id), T_CHOICE, T_ENDCHOICE)) {
@@ -1790,7 +1800,7 @@ yyreduce:
 ;}
     break;
 
-  case 60:
+  case 61:
 
     {
 	menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
@@ -1798,7 +1808,7 @@ yyreduce:
 ;}
     break;
 
-  case 61:
+  case 62:
 
     {
 	if ((yyvsp[(1) - (3)].id)->stype == S_BOOLEAN || (yyvsp[(1) - (3)].id)->stype == S_TRISTATE) {
@@ -1811,7 +1821,7 @@ yyreduce:
 ;}
     break;
 
-  case 62:
+  case 63:
 
     {
 	current_entry->sym->flags |= SYMBOL_OPTIONAL;
@@ -1819,7 +1829,7 @@ yyreduce:
 ;}
     break;
 
-  case 63:
+  case 64:
 
     {
 	if ((yyvsp[(1) - (4)].id)->stype == S_UNKNOWN) {
@@ -1831,7 +1841,7 @@ yyreduce:
 ;}
     break;
 
-  case 66:
+  case 67:
 
     {
 	printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno());
@@ -1841,7 +1851,7 @@ yyreduce:
 ;}
     break;
 
-  case 67:
+  case 68:
 
     {
 	if (zconf_endtoken((yyvsp[(1) - (1)].id), T_IF, T_ENDIF)) {
@@ -1851,14 +1861,14 @@ yyreduce:
 ;}
     break;
 
-  case 73:
+  case 74:
 
     {
 	menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL);
 ;}
     break;
 
-  case 74:
+  case 75:
 
     {
 	menu_add_entry(NULL);
@@ -1867,14 +1877,14 @@ yyreduce:
 ;}
     break;
 
-  case 75:
+  case 76:
 
     {
 	(yyval.menu) = menu_add_menu();
 ;}
     break;
 
-  case 76:
+  case 77:
 
     {
 	if (zconf_endtoken((yyvsp[(1) - (1)].id), T_MENU, T_ENDMENU)) {
@@ -1884,7 +1894,7 @@ yyreduce:
 ;}
     break;
 
-  case 82:
+  case 83:
 
     {
 	printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string));
@@ -1892,7 +1902,7 @@ yyreduce:
 ;}
     break;
 
-  case 83:
+  case 84:
 
     {
 	menu_add_entry(NULL);
@@ -1901,14 +1911,14 @@ yyreduce:
 ;}
     break;
 
-  case 84:
+  case 85:
 
     {
 	menu_end_entry();
 ;}
     break;
 
-  case 85:
+  case 86:
 
     {
 	printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno());
@@ -1916,14 +1926,14 @@ yyreduce:
 ;}
     break;
 
-  case 86:
+  case 87:
 
     {
 	current_entry->help = (yyvsp[(2) - (2)].string);
 ;}
     break;
 
-  case 91:
+  case 92:
 
     {
 	menu_add_dep((yyvsp[(3) - (4)].expr));
@@ -1931,84 +1941,91 @@ yyreduce:
 ;}
     break;
 
-  case 93:
+  case 96:
+
+    {
+	menu_add_visibility((yyvsp[(2) - (2)].expr));
+;}
+    break;
+
+  case 98:
 
     {
 	menu_add_prompt(P_PROMPT, (yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].expr));
 ;}
     break;
 
-  case 96:
+  case 101:
 
     { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
     break;
 
-  case 97:
+  case 102:
 
     { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
     break;
 
-  case 98:
+  case 103:
 
     { (yyval.id) = (yyvsp[(1) - (2)].id); ;}
     break;
 
-  case 101:
+  case 106:
 
     { (yyval.expr) = NULL; ;}
     break;
 
-  case 102:
+  case 107:
 
     { (yyval.expr) = (yyvsp[(2) - (2)].expr); ;}
     break;
 
-  case 103:
+  case 108:
 
     { (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); ;}
     break;
 
-  case 104:
+  case 109:
 
     { (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
     break;
 
-  case 105:
+  case 110:
 
     { (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
     break;
 
-  case 106:
+  case 111:
 
     { (yyval.expr) = (yyvsp[(2) - (3)].expr); ;}
     break;
 
-  case 107:
+  case 112:
 
     { (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); ;}
     break;
 
-  case 108:
+  case 113:
 
     { (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
     break;
 
-  case 109:
+  case 114:
 
     { (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
     break;
 
-  case 110:
+  case 115:
 
     { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); ;}
     break;
 
-  case 111:
+  case 116:
 
     { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), SYMBOL_CONST); free((yyvsp[(1) - (1)].string)); ;}
     break;
 
-  case 112:
+  case 117:
 
     { (yyval.string) = NULL; ;}
     break;
@@ -2278,6 +2295,7 @@ static const char *zconf_tokenname(int token)
 	case T_IF:		return "if";
 	case T_ENDIF:		return "endif";
 	case T_DEPENDS:		return "depends";
+	case T_VISIBLE:		return "visible";
 	}
 	return "<token>";
 }
diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y
index 2abd3c7ff15..49fb4ab664c 100644
--- a/scripts/kconfig/zconf.y
+++ b/scripts/kconfig/zconf.y
@@ -36,7 +36,7 @@ static struct menu *current_menu, *current_entry;
 #define YYERROR_VERBOSE
 #endif
 %}
-%expect 28
+%expect 30
 
 %union
 {
@@ -68,6 +68,7 @@ static struct menu *current_menu, *current_entry;
 %token <id>T_DEFAULT
 %token <id>T_SELECT
 %token <id>T_RANGE
+%token <id>T_VISIBLE
 %token <id>T_OPTION
 %token <id>T_ON
 %token <string> T_WORD
@@ -123,7 +124,7 @@ stmt_list:
 ;
 
 option_name:
-	T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT
+	T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT | T_VISIBLE
 ;
 
 common_stmt:
@@ -359,7 +360,7 @@ menu: T_MENU prompt T_EOL
 	printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
 };
 
-menu_entry: menu depends_list
+menu_entry: menu visibility_list depends_list
 {
 	$$ = menu_add_menu();
 };
@@ -430,6 +431,19 @@ depends: T_DEPENDS T_ON expr T_EOL
 	printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno());
 };
 
+/* visibility option */
+
+visibility_list:
+	  /* empty */
+	| visibility_list visible
+	| visibility_list T_EOL
+;
+
+visible: T_VISIBLE if_expr
+{
+	menu_add_visibility($2);
+};
+
 /* prompt statement */
 
 prompt_stmt_opt:
@@ -526,6 +540,7 @@ static const char *zconf_tokenname(int token)
 	case T_IF:		return "if";
 	case T_ENDIF:		return "endif";
 	case T_DEPENDS:		return "depends";
+	case T_VISIBLE:		return "visible";
 	}
 	return "<token>";
 }
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index cdb6dc1f645..9f85012acf0 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -5,7 +5,7 @@ use strict;
 ## Copyright (c) 1998 Michael Zucchi, All Rights Reserved        ##
 ## Copyright (C) 2000, 1  Tim Waugh <twaugh@redhat.com>          ##
 ## Copyright (C) 2001  Simon Huggins                             ##
-## Copyright (C) 2005-2009  Randy Dunlap                         ##
+## Copyright (C) 2005-2010  Randy Dunlap                         ##
 ## 								 ##
 ## #define enhancements by Armin Kuster <akuster@mvista.com>	 ##
 ## Copyright (c) 2000 MontaVista Software, Inc.			 ##
@@ -155,6 +155,8 @@ use strict;
 # '@parameter' - name of a parameter
 # '%CONST' - name of a constant.
 
+## init lots of data
+
 my $errors = 0;
 my $warnings = 0;
 my $anon_struct_union = 0;
@@ -218,21 +220,14 @@ my %highlights_list = ( $type_constant, "\$1",
 			$type_param, "\$1" );
 my $blankline_list = "";
 
-sub usage {
-    print "Usage: $0 [ -v ] [ -docbook | -html | -text | -man | -list ]\n";
-    print "         [ -no-doc-sections ]\n";
-    print "         [ -function funcname [ -function funcname ...] ]\n";
-    print "         [ -nofunction funcname [ -nofunction funcname ...] ]\n";
-    print "         c source file(s) > outputfile\n";
-    print "         -v : verbose output, more warnings & other info listed\n";
-    exit 1;
-}
-
 # read arguments
 if ($#ARGV == -1) {
     usage();
 }
 
+my $kernelversion;
+my $dohighlight = "";
+
 my $verbose = 0;
 my $output_mode = "man";
 my $no_doc_sections = 0;
@@ -245,7 +240,7 @@ my $man_date = ('January', 'February', 'March', 'April', 'May', 'June',
 		'November', 'December')[(localtime)[4]] .
   " " . ((localtime)[5]+1900);
 
-# Essentially these are globals
+# Essentially these are globals.
 # They probably want to be tidied up, made more localised or something.
 # CAVEAT EMPTOR!  Some of the others I localised may not want to be, which
 # could cause "use of undefined value" or other bugs.
@@ -353,6 +348,18 @@ while ($ARGV[0] =~ m/^-(.*)/) {
     }
 }
 
+# continue execution near EOF;
+
+sub usage {
+    print "Usage: $0 [ -v ] [ -docbook | -html | -text | -man | -list ]\n";
+    print "         [ -no-doc-sections ]\n";
+    print "         [ -function funcname [ -function funcname ...] ]\n";
+    print "         [ -nofunction funcname [ -nofunction funcname ...] ]\n";
+    print "         c source file(s) > outputfile\n";
+    print "         -v : verbose output, more warnings & other info listed\n";
+    exit 1;
+}
+
 # get kernel version from env
 sub get_kernel_version() {
     my $version = 'unknown kernel version';
@@ -362,15 +369,6 @@ sub get_kernel_version() {
     }
     return $version;
 }
-my $kernelversion = get_kernel_version();
-
-# generate a sequence of code that will splice in highlighting information
-# using the s// operator.
-my $dohighlight = "";
-foreach my $pattern (keys %highlights) {
-#   print STDERR "scanning pattern:$pattern, highlight:($highlights{$pattern})\n";
-    $dohighlight .=  "\$contents =~ s:$pattern:$highlights{$pattern}:gs;\n";
-}
 
 ##
 # dumps section contents to arrays/hashes intended for that purpose.
@@ -453,7 +451,7 @@ sub output_highlight {
     if ($output_mode eq "html" || $output_mode eq "xml") {
 	$contents = local_unescape($contents);
 	# convert data read & converted thru xml_escape() into &xyz; format:
-	$contents =~ s/\\\\\\/&/g;
+	$contents =~ s/\\\\\\/\&/g;
     }
 #   print STDERR "contents b4:$contents\n";
     eval $dohighlight;
@@ -770,7 +768,11 @@ sub output_struct_xml(%) {
     print $args{'type'} . " " . $args{'struct'} . " {\n";
     foreach $parameter (@{$args{'parameterlist'}}) {
 	if ($parameter =~ /^#/) {
-	    print "$parameter\n";
+	    my $prm = $parameter;
+	    # convert data read & converted thru xml_escape() into &xyz; format:
+	    # This allows us to have #define macros interspersed in a struct.
+	    $prm =~ s/\\\\\\/\&/g;
+	    print "$prm\n";
 	    next;
 	}
 
@@ -1701,6 +1703,8 @@ sub push_parameter($$$) {
 	}
 	}
 
+	$param = xml_escape($param);
+
 	# strip spaces from $param so that it is one continous string
 	# on @parameterlist;
 	# this fixes a problem where check_sections() cannot find
@@ -1845,34 +1849,6 @@ sub dump_function($$) {
 		       });
 }
 
-sub process_file($);
-
-# Read the file that maps relative names to absolute names for
-# separate source and object directories and for shadow trees.
-if (open(SOURCE_MAP, "<.tmp_filelist.txt")) {
-	my ($relname, $absname);
-	while(<SOURCE_MAP>) {
-		chop();
-		($relname, $absname) = (split())[0..1];
-		$relname =~ s:^/+::;
-		$source_map{$relname} = $absname;
-	}
-	close(SOURCE_MAP);
-}
-
-foreach (@ARGV) {
-    chomp;
-    process_file($_);
-}
-if ($verbose && $errors) {
-  print STDERR "$errors errors\n";
-}
-if ($verbose && $warnings) {
-  print STDERR "$warnings warnings\n";
-}
-
-exit($errors);
-
 sub reset_state {
     $function = "";
     %constants = ();
@@ -2279,3 +2255,39 @@ sub process_file($) {
 	}
     }
 }
+
+
+$kernelversion = get_kernel_version();
+
+# generate a sequence of code that will splice in highlighting information
+# using the s// operator.
+foreach my $pattern (keys %highlights) {
+#   print STDERR "scanning pattern:$pattern, highlight:($highlights{$pattern})\n";
+    $dohighlight .=  "\$contents =~ s:$pattern:$highlights{$pattern}:gs;\n";
+}
+
+# Read the file that maps relative names to absolute names for
+# separate source and object directories and for shadow trees.
+if (open(SOURCE_MAP, "<.tmp_filelist.txt")) {
+	my ($relname, $absname);
+	while(<SOURCE_MAP>) {
+		chop();
+		($relname, $absname) = (split())[0..1];
+		$relname =~ s:^/+::;
+		$source_map{$relname} = $absname;
+	}
+	close(SOURCE_MAP);
+}
+
+foreach (@ARGV) {
+    chomp;
+    process_file($_);
+}
+if ($verbose && $errors) {
+  print STDERR "$errors errors\n";
+}
+if ($verbose && $warnings) {
+  print STDERR "$warnings warnings\n";
+}
+
+exit($errors);
diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c
index f2f32eee2c5..038b3d1e298 100644
--- a/scripts/recordmcount.c
+++ b/scripts/recordmcount.c
@@ -38,6 +38,7 @@ static void *ehdr_curr; /* current ElfXX_Ehdr *  for resource cleanup */
 static char gpfx;	/* prefix for global symbol name (sometimes '_') */
 static struct stat sb;	/* Remember .st_size, etc. */
 static jmp_buf jmpenv;	/* setjmp/longjmp per-file error escape */
+static const char *altmcount;	/* alternate mcount symbol name */
 
 /* setjmp() return values */
 enum {
@@ -299,7 +300,9 @@ do_file(char const *const fname)
 		fail_file();
 	} break;
 	case EM_386:	 reltype = R_386_32;                   break;
-	case EM_ARM:	 reltype = R_ARM_ABS32;                break;
+	case EM_ARM:	 reltype = R_ARM_ABS32;
+			 altmcount = "__gnu_mcount_nc";
+			 break;
 	case EM_IA_64:	 reltype = R_IA64_IMM64;   gpfx = '_'; break;
 	case EM_MIPS:	 /* reltype: e_class    */ gpfx = '_'; break;
 	case EM_PPC:	 reltype = R_PPC_ADDR32;   gpfx = '_'; break;
@@ -357,7 +360,7 @@ do_file(char const *const fname)
 int
 main(int argc, char const *argv[])
 {
-	const char ftrace[] = "kernel/trace/ftrace.o";
+	const char ftrace[] = "/ftrace.o";
 	int ftrace_size = sizeof(ftrace) - 1;
 	int n_error = 0;  /* gcc-4.3.0 false positive complaint */
 
diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h
index 58e933a2054..baf187bee98 100644
--- a/scripts/recordmcount.h
+++ b/scripts/recordmcount.h
@@ -119,7 +119,7 @@ static uint_t (*Elf_r_sym)(Elf_Rel const *rp) = fn_ELF_R_SYM;
 
 static void fn_ELF_R_INFO(Elf_Rel *const rp, unsigned sym, unsigned type)
 {
-	rp->r_info = ELF_R_INFO(sym, type);
+	rp->r_info = _w(ELF_R_INFO(sym, type));
 }
 static void (*Elf_r_info)(Elf_Rel *const rp, unsigned sym, unsigned type) = fn_ELF_R_INFO;
 
@@ -275,11 +275,12 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
 			Elf_Sym const *const symp =
 				&sym0[Elf_r_sym(relp)];
 			char const *symname = &str0[w(symp->st_name)];
+			char const *mcount = '_' == gpfx ? "_mcount" : "mcount";
 
 			if ('.' == symname[0])
 				++symname;  /* ppc64 hack */
-			if (0 == strcmp((('_' == gpfx) ? "_mcount" : "mcount"),
-					symname))
+			if (0 == strcmp(mcount, symname) ||
+			    (altmcount && 0 == strcmp(altmcount, symname)))
 				mcountsym = Elf_r_sym(relp);
 		}
 
diff --git a/scripts/tags.sh b/scripts/tags.sh
index 8509bb51293..bbbe584d449 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -125,7 +125,9 @@ exuberant()
 	-I DEFINE_TRACE,EXPORT_TRACEPOINT_SYMBOL,EXPORT_TRACEPOINT_SYMBOL_GPL \
 	--extra=+f --c-kinds=-px                                \
 	--regex-asm='/^ENTRY\(([^)]*)\).*/\1/'                  \
-	--regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/'
+	--regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/' \
+	--regex-c++='/^TRACE_EVENT\(([^,)]*).*/trace_\1/'		\
+	--regex-c++='/^DEFINE_EVENT\(([^,)]*).*/trace_\1/'
 
 	all_kconfigs | xargs $1 -a                              \
 	--langdef=kconfig --language-force=kconfig              \
diff --git a/security/Kconfig b/security/Kconfig
index bd72ae62349..e80da955e68 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -39,6 +39,18 @@ config KEYS_DEBUG_PROC_KEYS
 
 	  If you are unsure as to whether this is required, answer N.
 
+config SECURITY_DMESG_RESTRICT
+	bool "Restrict unprivileged access to the kernel syslog"
+	default n
+	help
+	  This enforces restrictions on unprivileged users reading the kernel
+	  syslog via dmesg(8).
+
+	  If this option is not selected, no restrictions will be enforced
+	  unless the dmesg_restrict sysctl is explicitly set to (1).
+
+	  If you are unsure how to answer this question, answer N.
+
 config SECURITY
 	bool "Enable different security models"
 	depends on SYSFS
diff --git a/security/apparmor/lsm.c b/security/apparmor/lsm.c
index cf1de4462cc..b7106f192b7 100644
--- a/security/apparmor/lsm.c
+++ b/security/apparmor/lsm.c
@@ -922,7 +922,7 @@ static int __init apparmor_init(void)
 	error = register_security(&apparmor_ops);
 	if (error) {
 		AA_ERROR("Unable to register AppArmor\n");
-		goto register_security_out;
+		goto set_init_cxt_out;
 	}
 
 	/* Report that AppArmor successfully initialized */
@@ -936,6 +936,9 @@ static int __init apparmor_init(void)
 
 	return error;
 
+set_init_cxt_out:
+	aa_free_task_context(current->real_cred->security);
+
 register_security_out:
 	aa_free_root_ns();
 
@@ -944,7 +947,6 @@ alloc_out:
 
 	apparmor_enabled = 0;
 	return error;
-
 }
 
 security_initcall(apparmor_init);
diff --git a/security/apparmor/policy.c b/security/apparmor/policy.c
index 52cc865f146..4f0eadee78b 100644
--- a/security/apparmor/policy.c
+++ b/security/apparmor/policy.c
@@ -306,7 +306,7 @@ static struct aa_namespace *alloc_namespace(const char *prefix,
 	return ns;
 
 fail_unconfined:
-	kzfree(ns->base.name);
+	kzfree(ns->base.hname);
 fail_ns:
 	kzfree(ns);
 	return NULL;
diff --git a/security/capability.c b/security/capability.c
index 30ae00fbecd..2a5df2b7da8 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -17,6 +17,11 @@ static int cap_sysctl(ctl_table *table, int op)
 	return 0;
 }
 
+static int cap_syslog(int type)
+{
+	return 0;
+}
+
 static int cap_quotactl(int cmds, int type, int id, struct super_block *sb)
 {
 	return 0;
@@ -543,7 +548,7 @@ static int cap_sem_semop(struct sem_array *sma, struct sembuf *sops,
 }
 
 #ifdef CONFIG_SECURITY_NETWORK
-static int cap_unix_stream_connect(struct socket *sock, struct socket *other,
+static int cap_unix_stream_connect(struct sock *sock, struct sock *other,
 				   struct sock *newsk)
 {
 	return 0;
diff --git a/security/commoncap.c b/security/commoncap.c
index 5e632b4857e..64c2ed9c901 100644
--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -27,7 +27,6 @@
 #include <linux/sched.h>
 #include <linux/prctl.h>
 #include <linux/securebits.h>
-#include <linux/syslog.h>
 
 /*
  * If a non-root user executes a setuid-root binary in
@@ -884,24 +883,6 @@ error:
 }
 
 /**
- * cap_syslog - Determine whether syslog function is permitted
- * @type: Function requested
- * @from_file: Whether this request came from an open file (i.e. /proc)
- *
- * Determine whether the current process is permitted to use a particular
- * syslog function, returning 0 if permission is granted, -ve if not.
- */
-int cap_syslog(int type, bool from_file)
-{
-	if (type != SYSLOG_ACTION_OPEN && from_file)
-		return 0;
-	if ((type != SYSLOG_ACTION_READ_ALL &&
-	     type != SYSLOG_ACTION_SIZE_BUFFER) && !capable(CAP_SYS_ADMIN))
-		return -EPERM;
-	return 0;
-}
-
-/**
  * cap_vm_enough_memory - Determine whether a new virtual mapping is permitted
  * @mm: The VM space in which the new mapping is to be made
  * @pages: The size of the mapping
diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c
index aef8c0a923a..d661afbe474 100644
--- a/security/integrity/ima/ima_policy.c
+++ b/security/integrity/ima/ima_policy.c
@@ -253,6 +253,8 @@ static int ima_lsm_rule_init(struct ima_measure_rule_entry *entry,
 	result = security_filter_rule_init(entry->lsm[lsm_rule].type,
 					   Audit_equal, args,
 					   &entry->lsm[lsm_rule].rule);
+	if (!entry->lsm[lsm_rule].rule)
+		return -EINVAL;
 	return result;
 }
 
diff --git a/security/keys/request_key.c b/security/keys/request_key.c
index 0088dd8bf68..0ea52d25a6b 100644
--- a/security/keys/request_key.c
+++ b/security/keys/request_key.c
@@ -403,7 +403,6 @@ link_check_failed:
 	return ret;
 
 link_prealloc_failed:
-	up_write(&dest_keyring->sem);
 	mutex_unlock(&user->cons_lock);
 	kleave(" = %d [prelink]", ret);
 	return ret;
diff --git a/security/security.c b/security/security.c
index 3ef5e2a7a74..739e40362f4 100644
--- a/security/security.c
+++ b/security/security.c
@@ -197,9 +197,9 @@ int security_quota_on(struct dentry *dentry)
 	return security_ops->quota_on(dentry);
 }
 
-int security_syslog(int type, bool from_file)
+int security_syslog(int type)
 {
-	return security_ops->syslog(type, from_file);
+	return security_ops->syslog(type);
 }
 
 int security_settime(struct timespec *ts, struct timezone *tz)
@@ -513,6 +513,15 @@ int security_inode_permission(struct inode *inode, int mask)
 	return security_ops->inode_permission(inode, mask);
 }
 
+int security_inode_exec_permission(struct inode *inode, unsigned int flags)
+{
+	if (unlikely(IS_PRIVATE(inode)))
+		return 0;
+	if (flags)
+		return -ECHILD;
+	return security_ops->inode_permission(inode, MAY_EXEC);
+}
+
 int security_inode_setattr(struct dentry *dentry, struct iattr *attr)
 {
 	if (unlikely(IS_PRIVATE(dentry->d_inode)))
@@ -977,8 +986,7 @@ EXPORT_SYMBOL(security_inode_getsecctx);
 
 #ifdef CONFIG_SECURITY_NETWORK
 
-int security_unix_stream_connect(struct socket *sock, struct socket *other,
-				 struct sock *newsk)
+int security_unix_stream_connect(struct sock *sock, struct sock *other, struct sock *newsk)
 {
 	return security_ops->unix_stream_connect(sock, other, newsk);
 }
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index d9154cf90ae..6f637d2678a 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -1973,14 +1973,10 @@ static int selinux_quota_on(struct dentry *dentry)
 	return dentry_has_perm(cred, NULL, dentry, FILE__QUOTAON);
 }
 
-static int selinux_syslog(int type, bool from_file)
+static int selinux_syslog(int type)
 {
 	int rc;
 
-	rc = cap_syslog(type, from_file);
-	if (rc)
-		return rc;
-
 	switch (type) {
 	case SYSLOG_ACTION_READ_ALL:	/* Read last kernel messages */
 	case SYSLOG_ACTION_SIZE_BUFFER:	/* Return size of the log buffer */
@@ -3925,18 +3921,18 @@ static int selinux_socket_shutdown(struct socket *sock, int how)
 	return sock_has_perm(current, sock->sk, SOCKET__SHUTDOWN);
 }
 
-static int selinux_socket_unix_stream_connect(struct socket *sock,
-					      struct socket *other,
+static int selinux_socket_unix_stream_connect(struct sock *sock,
+					      struct sock *other,
 					      struct sock *newsk)
 {
-	struct sk_security_struct *sksec_sock = sock->sk->sk_security;
-	struct sk_security_struct *sksec_other = other->sk->sk_security;
+	struct sk_security_struct *sksec_sock = sock->sk_security;
+	struct sk_security_struct *sksec_other = other->sk_security;
 	struct sk_security_struct *sksec_new = newsk->sk_security;
 	struct common_audit_data ad;
 	int err;
 
 	COMMON_AUDIT_DATA_INIT(&ad, NET);
-	ad.u.net.sk = other->sk;
+	ad.u.net.sk = other;
 
 	err = avc_has_perm(sksec_sock->sid, sksec_other->sid,
 			   sksec_other->sclass,
@@ -4524,11 +4520,11 @@ static unsigned int selinux_ip_postroute_compat(struct sk_buff *skb,
 	if (selinux_secmark_enabled())
 		if (avc_has_perm(sksec->sid, skb->secmark,
 				 SECCLASS_PACKET, PACKET__SEND, &ad))
-			return NF_DROP;
+			return NF_DROP_ERR(-ECONNREFUSED);
 
 	if (selinux_policycap_netpeer)
 		if (selinux_xfrm_postroute_last(sksec->sid, skb, &ad, proto))
-			return NF_DROP;
+			return NF_DROP_ERR(-ECONNREFUSED);
 
 	return NF_ACCEPT;
 }
@@ -4585,7 +4581,7 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex,
 				secmark_perm = PACKET__SEND;
 			break;
 		default:
-			return NF_DROP;
+			return NF_DROP_ERR(-ECONNREFUSED);
 		}
 		if (secmark_perm == PACKET__FORWARD_OUT) {
 			if (selinux_skb_peerlbl_sid(skb, family, &peer_sid))
@@ -4607,7 +4603,7 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex,
 	if (secmark_active)
 		if (avc_has_perm(peer_sid, skb->secmark,
 				 SECCLASS_PACKET, secmark_perm, &ad))
-			return NF_DROP;
+			return NF_DROP_ERR(-ECONNREFUSED);
 
 	if (peerlbl_active) {
 		u32 if_sid;
@@ -4617,13 +4613,13 @@ static unsigned int selinux_ip_postroute(struct sk_buff *skb, int ifindex,
 			return NF_DROP;
 		if (avc_has_perm(peer_sid, if_sid,
 				 SECCLASS_NETIF, NETIF__EGRESS, &ad))
-			return NF_DROP;
+			return NF_DROP_ERR(-ECONNREFUSED);
 
 		if (sel_netnode_sid(addrp, family, &node_sid))
 			return NF_DROP;
 		if (avc_has_perm(peer_sid, node_sid,
 				 SECCLASS_NODE, NODE__SENDTO, &ad))
-			return NF_DROP;
+			return NF_DROP_ERR(-ECONNREFUSED);
 	}
 
 	return NF_ACCEPT;
diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c
index 073fd5b0a53..43deac21949 100644
--- a/security/selinux/selinuxfs.c
+++ b/security/selinux/selinuxfs.c
@@ -1145,24 +1145,28 @@ static void sel_remove_entries(struct dentry *de)
 {
 	struct list_head *node;
 
-	spin_lock(&dcache_lock);
+	spin_lock(&de->d_lock);
 	node = de->d_subdirs.next;
 	while (node != &de->d_subdirs) {
 		struct dentry *d = list_entry(node, struct dentry, d_u.d_child);
+
+		spin_lock_nested(&d->d_lock, DENTRY_D_LOCK_NESTED);
 		list_del_init(node);
 
 		if (d->d_inode) {
-			d = dget_locked(d);
-			spin_unlock(&dcache_lock);
+			dget_dlock(d);
+			spin_unlock(&de->d_lock);
+			spin_unlock(&d->d_lock);
 			d_delete(d);
 			simple_unlink(de->d_inode, d);
 			dput(d);
-			spin_lock(&dcache_lock);
-		}
+			spin_lock(&de->d_lock);
+		} else
+			spin_unlock(&d->d_lock);
 		node = de->d_subdirs.next;
 	}
 
-	spin_unlock(&dcache_lock);
+	spin_unlock(&de->d_lock);
 }
 
 #define BOOL_DIR_NAME "booleans"
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index bc39f4067af..ccb71a044a1 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -157,15 +157,11 @@ static int smack_ptrace_traceme(struct task_struct *ptp)
  *
  * Returns 0 on success, error code otherwise.
  */
-static int smack_syslog(int type, bool from_file)
+static int smack_syslog(int typefrom_file)
 {
-	int rc;
+	int rc = 0;
 	char *sp = current_security();
 
-	rc = cap_syslog(type, from_file);
-	if (rc != 0)
-		return rc;
-
 	if (capable(CAP_MAC_OVERRIDE))
 		return 0;
 
@@ -2412,22 +2408,22 @@ static int smack_setprocattr(struct task_struct *p, char *name,
 
 /**
  * smack_unix_stream_connect - Smack access on UDS
- * @sock: one socket
- * @other: the other socket
+ * @sock: one sock
+ * @other: the other sock
  * @newsk: unused
  *
  * Return 0 if a subject with the smack of sock could access
  * an object with the smack of other, otherwise an error code
  */
-static int smack_unix_stream_connect(struct socket *sock,
-				     struct socket *other, struct sock *newsk)
+static int smack_unix_stream_connect(struct sock *sock,
+				     struct sock *other, struct sock *newsk)
 {
-	struct inode *sp = SOCK_INODE(sock);
-	struct inode *op = SOCK_INODE(other);
+	struct inode *sp = SOCK_INODE(sock->sk_socket);
+	struct inode *op = SOCK_INODE(other->sk_socket);
 	struct smk_audit_info ad;
 
 	smk_ad_init(&ad, __func__, LSM_AUDIT_DATA_NET);
-	smk_ad_setfield_u_net_sk(&ad, other->sk);
+	smk_ad_setfield_u_net_sk(&ad, other);
 	return smk_access(smk_of_inode(sp), smk_of_inode(op),
 				 MAY_READWRITE, &ad);
 }
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index 1d0bf8fa192..d1e05b04771 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -14,6 +14,7 @@
 #include <linux/slab.h>
 #include <net/sock.h>
 #include "common.h"
+#include "../../fs/internal.h"
 
 /**
  * tomoyo_encode: Convert binary string to ascii string.
diff --git a/sound/atmel/abdac.c b/sound/atmel/abdac.c
index f2f41c85422..6e240918189 100644
--- a/sound/atmel/abdac.c
+++ b/sound/atmel/abdac.c
@@ -420,9 +420,9 @@ static int __devinit atmel_abdac_probe(struct platform_device *pdev)
 		return PTR_ERR(pclk);
 	}
 	sample_clk = clk_get(&pdev->dev, "sample_clk");
-	if (IS_ERR(pclk)) {
+	if (IS_ERR(sample_clk)) {
 		dev_dbg(&pdev->dev, "no sample clock\n");
-		retval = PTR_ERR(pclk);
+		retval = PTR_ERR(sample_clk);
 		goto out_put_pclk;
 	}
 	clk_enable(pclk);
diff --git a/sound/core/info.c b/sound/core/info.c
index b70564ed8b3..7077f601da5 100644
--- a/sound/core/info.c
+++ b/sound/core/info.c
@@ -23,7 +23,6 @@
 #include <linux/time.h>
 #include <linux/mm.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <sound/core.h>
 #include <sound/minors.h>
diff --git a/sound/core/oss/pcm_oss.c b/sound/core/oss/pcm_oss.c
index 5c8c7dff8ed..b753ec661fc 100644
--- a/sound/core/oss/pcm_oss.c
+++ b/sound/core/oss/pcm_oss.c
@@ -1510,16 +1510,19 @@ static ssize_t snd_pcm_oss_read1(struct snd_pcm_substream *substream, char __use
 static int snd_pcm_oss_reset(struct snd_pcm_oss_file *pcm_oss_file)
 {
 	struct snd_pcm_substream *substream;
+	struct snd_pcm_runtime *runtime;
+	int i;
 
-	substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK];
-	if (substream != NULL) {
-		snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
-		substream->runtime->oss.prepare = 1;
-	}
-	substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_CAPTURE];
-	if (substream != NULL) {
+	for (i = 0; i < 2; i++) { 
+		substream = pcm_oss_file->streams[i];
+		if (!substream)
+			continue;
+		runtime = substream->runtime;
 		snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
-		substream->runtime->oss.prepare = 1;
+		runtime->oss.prepare = 1;
+		runtime->oss.buffer_used = 0;
+		runtime->oss.prev_hw_ptr_period = 0;
+		runtime->oss.period_ptr = 0;
 	}
 	return 0;
 }
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index a1707cca9c6..11446a1506d 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -223,7 +223,7 @@ static void xrun_log(struct snd_pcm_substream *substream,
 	entry->jiffies = jiffies;
 	entry->pos = pos;
 	entry->period_size = runtime->period_size;
-	entry->buffer_size = runtime->buffer_size;;
+	entry->buffer_size = runtime->buffer_size;
 	entry->old_hw_ptr = runtime->status->hw_ptr;
 	entry->hw_ptr_base = runtime->hw_ptr_base;
 	log->idx = (log->idx + 1) % XRUN_LOG_CNT;
@@ -1070,8 +1070,10 @@ int snd_pcm_hw_rule_add(struct snd_pcm_runtime *runtime, unsigned int cond,
 		struct snd_pcm_hw_rule *new;
 		unsigned int new_rules = constrs->rules_all + 16;
 		new = kcalloc(new_rules, sizeof(*c), GFP_KERNEL);
-		if (!new)
+		if (!new) {
+			va_end(args);
 			return -ENOMEM;
+		}
 		if (constrs->rules) {
 			memcpy(new, constrs->rules,
 			       constrs->rules_num * sizeof(*c));
@@ -1087,8 +1089,10 @@ int snd_pcm_hw_rule_add(struct snd_pcm_runtime *runtime, unsigned int cond,
 	c->private = private;
 	k = 0;
 	while (1) {
-		if (snd_BUG_ON(k >= ARRAY_SIZE(c->deps)))
+		if (snd_BUG_ON(k >= ARRAY_SIZE(c->deps))) {
+			va_end(args);
 			return -EINVAL;
+		}
 		c->deps[k++] = dep;
 		if (dep < 0)
 			break;
@@ -1097,7 +1101,7 @@ int snd_pcm_hw_rule_add(struct snd_pcm_runtime *runtime, unsigned int cond,
 	constrs->rules_num++;
 	va_end(args);
 	return 0;
-}				    
+}
 
 EXPORT_SYMBOL(snd_pcm_hw_rule_add);
 
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 8bc7cb3db33..e82c1f97d99 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -22,7 +22,6 @@
 #include <linux/mm.h>
 #include <linux/file.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/time.h>
 #include <linux/pm_qos_params.h>
 #include <linux/uio.h>
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 62a093efb45..66691fe437e 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -21,7 +21,6 @@
 
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/time.h>
 #include <linux/device.h>
 #include <linux/moduleparam.h>
diff --git a/sound/oss/dev_table.c b/sound/oss/dev_table.c
index 727bdb9ba2d..d8cf3e58dc7 100644
--- a/sound/oss/dev_table.c
+++ b/sound/oss/dev_table.c
@@ -71,7 +71,7 @@ int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver,
 	if (sound_nblocks >= MAX_MEM_BLOCKS)
 		sound_nblocks = MAX_MEM_BLOCKS - 1;
 
-	op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct audio_operations)));
+	op = (struct audio_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct audio_operations)));
 	sound_nblocks++;
 	if (sound_nblocks >= MAX_MEM_BLOCKS)
 		sound_nblocks = MAX_MEM_BLOCKS - 1;
@@ -81,7 +81,6 @@ int sound_install_audiodrv(int vers, char *name, struct audio_driver *driver,
 		sound_unload_audiodev(num);
 		return -(ENOMEM);
 	}
-	memset((char *) op, 0, sizeof(struct audio_operations));
 	init_waitqueue_head(&op->in_sleeper);
 	init_waitqueue_head(&op->out_sleeper);	
 	init_waitqueue_head(&op->poll_sleeper);
@@ -128,7 +127,7 @@ int sound_install_mixer(int vers, char *name, struct mixer_operations *driver,
 	/* FIXME: This leaks a mixer_operations struct every time its called
 	   until you unload sound! */
 	   
-	op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vmalloc(sizeof(struct mixer_operations)));
+	op = (struct mixer_operations *) (sound_mem_blocks[sound_nblocks] = vzalloc(sizeof(struct mixer_operations)));
 	sound_nblocks++;
 	if (sound_nblocks >= MAX_MEM_BLOCKS)
 		sound_nblocks = MAX_MEM_BLOCKS - 1;
@@ -137,7 +136,6 @@ int sound_install_mixer(int vers, char *name, struct mixer_operations *driver,
 		printk(KERN_ERR "Sound: Can't allocate mixer driver for (%s)\n", name);
 		return -ENOMEM;
 	}
-	memset((char *) op, 0, sizeof(struct mixer_operations));
 	memcpy((char *) op, (char *) driver, driver_size);
 
 	strlcpy(op->name, name, sizeof(op->name));
diff --git a/sound/oss/midibuf.c b/sound/oss/midibuf.c
index 782b3b84dac..ceedb1eff20 100644
--- a/sound/oss/midibuf.c
+++ b/sound/oss/midibuf.c
@@ -178,7 +178,7 @@ int MIDIbuf_open(int dev, struct file *file)
 		return err;
 
 	parms[dev].prech_timeout = MAX_SCHEDULE_TIMEOUT;
-	midi_in_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf));
+	midi_in_buf[dev] = vmalloc(sizeof(struct midi_buf));
 
 	if (midi_in_buf[dev] == NULL)
 	{
@@ -188,7 +188,7 @@ int MIDIbuf_open(int dev, struct file *file)
 	}
 	midi_in_buf[dev]->len = midi_in_buf[dev]->head = midi_in_buf[dev]->tail = 0;
 
-	midi_out_buf[dev] = (struct midi_buf *) vmalloc(sizeof(struct midi_buf));
+	midi_out_buf[dev] = vmalloc(sizeof(struct midi_buf));
 
 	if (midi_out_buf[dev] == NULL)
 	{
diff --git a/sound/oss/pss.c b/sound/oss/pss.c
index e19dd5dcc2d..9b800ce5100 100644
--- a/sound/oss/pss.c
+++ b/sound/oss/pss.c
@@ -859,7 +859,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg,
 			return 0;
 
 		case SNDCTL_COPR_LOAD:
-			buf = (copr_buffer *) vmalloc(sizeof(copr_buffer));
+			buf = vmalloc(sizeof(copr_buffer));
 			if (buf == NULL)
 				return -ENOSPC;
 			if (copy_from_user(buf, arg, sizeof(copr_buffer))) {
@@ -871,7 +871,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg,
 			return err;
 		
 		case SNDCTL_COPR_SENDMSG:
-			mbuf = (copr_msg *)vmalloc(sizeof(copr_msg));
+			mbuf = vmalloc(sizeof(copr_msg));
 			if (mbuf == NULL)
 				return -ENOSPC;
 			if (copy_from_user(mbuf, arg, sizeof(copr_msg))) {
@@ -895,7 +895,7 @@ static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg,
 
 		case SNDCTL_COPR_RCVMSG:
 			err = 0;
-			mbuf = (copr_msg *)vmalloc(sizeof(copr_msg));
+			mbuf = vmalloc(sizeof(copr_msg));
 			if (mbuf == NULL)
 				return -ENOSPC;
 			data = (unsigned short *)mbuf->data;
diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c
index e85789e5381..5ea1098ac42 100644
--- a/sound/oss/sequencer.c
+++ b/sound/oss/sequencer.c
@@ -1646,13 +1646,13 @@ void sequencer_init(void)
 {
 	if (sequencer_ok)
 		return;
-	queue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * EV_SZ);
+	queue = vmalloc(SEQ_MAX_QUEUE * EV_SZ);
 	if (queue == NULL)
 	{
 		printk(KERN_ERR "sequencer: Can't allocate memory for sequencer output queue\n");
 		return;
 	}
-	iqueue = (unsigned char *)vmalloc(SEQ_MAX_QUEUE * IEV_SZ);
+	iqueue = vmalloc(SEQ_MAX_QUEUE * IEV_SZ);
 	if (iqueue == NULL)
 	{
 		printk(KERN_ERR "sequencer: Can't allocate memory for sequencer input queue\n");
diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c
index 46c0d03dbec..fcb14a09982 100644
--- a/sound/oss/soundcard.c
+++ b/sound/oss/soundcard.c
@@ -87,7 +87,7 @@ int *load_mixer_volumes(char *name, int *levels, int present)
 	int             i, n;
 
 	for (i = 0; i < num_mixer_volumes; i++) {
-		if (strcmp(name, mixer_vols[i].name) == 0) {
+		if (strncmp(name, mixer_vols[i].name, 32) == 0) {
 			if (present)
 				mixer_vols[i].num = i;
 			return mixer_vols[i].levels;
@@ -99,7 +99,7 @@ int *load_mixer_volumes(char *name, int *levels, int present)
 	}
 	n = num_mixer_volumes++;
 
-	strcpy(mixer_vols[n].name, name);
+	strncpy(mixer_vols[n].name, name, 32);
 
 	if (present)
 		mixer_vols[n].num = n;
diff --git a/sound/pci/asihpi/hpioctl.c b/sound/pci/asihpi/hpioctl.c
index 62895a719fc..22dbd91811a 100644
--- a/sound/pci/asihpi/hpioctl.c
+++ b/sound/pci/asihpi/hpioctl.c
@@ -435,7 +435,7 @@ void __devexit asihpi_adapter_remove(struct pci_dev *pci_dev)
 	struct hpi_message hm;
 	struct hpi_response hr;
 	struct hpi_adapter *pa;
-	pa = (struct hpi_adapter *)pci_get_drvdata(pci_dev);
+	pa = pci_get_drvdata(pci_dev);
 
 	hpi_init_message_response(&hm, &hr, HPI_OBJ_SUBSYSTEM,
 		HPI_SUBSYS_DELETE_ADAPTER);
diff --git a/sound/pci/azt3328.c b/sound/pci/azt3328.c
index 4679ed83a43..2f3cacbd552 100644
--- a/sound/pci/azt3328.c
+++ b/sound/pci/azt3328.c
@@ -1129,10 +1129,11 @@ snd_azf3328_codec_setdmaa(struct snd_azf3328 *chip,
 
 		count_areas = size/2;
 		addr_area2 = addr+count_areas;
-		count_areas--; /* max. index */
 		snd_azf3328_dbgcodec("setdma: buffers %08lx[%u] / %08lx[%u]\n",
 				addr, count_areas, addr_area2, count_areas);
 
+		count_areas--; /* max. index */
+
 		/* build combined I/O buffer length word */
 		lengths = (count_areas << 16) | (count_areas);
 		spin_lock_irqsave(&chip->reg_lock, flags);
@@ -1740,11 +1741,15 @@ static const struct snd_pcm_hardware snd_azf3328_hardware =
 	.rate_max =		AZF_FREQ_66200,
 	.channels_min =		1,
 	.channels_max =		2,
-	.buffer_bytes_max =	65536,
-	.period_bytes_min =	64,
-	.period_bytes_max =	65536,
-	.periods_min =		1,
-	.periods_max =		1024,
+	.buffer_bytes_max =	(64*1024),
+	.period_bytes_min =	1024,
+	.period_bytes_max =	(32*1024),
+	/* We simply have two DMA areas (instead of a list of descriptors
+	   such as other cards); I believe that this is a fixed hardware
+	   attribute and there isn't much driver magic to be done to expand it.
+	   Thus indicate that we have at least and at most 2 periods. */
+	.periods_min =		2,
+	.periods_max =		2,
 	/* FIXME: maybe that card actually has a FIFO?
 	 * Hmm, it seems newer revisions do have one, but we still don't know
 	 * its size... */
@@ -1980,8 +1985,13 @@ snd_azf3328_timer_stop(struct snd_timer *timer)
 	chip = snd_timer_chip(timer);
 	spin_lock_irqsave(&chip->reg_lock, flags);
 	/* disable timer countdown and interrupt */
-	/* FIXME: should we write TIMER_IRQ_ACK here? */
-	snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0);
+	/* Hmm, should we write TIMER_IRQ_ACK here?
+	   YES indeed, otherwise a rogue timer operation - which prompts
+	   ALSA(?) to call repeated stop() in vain, but NOT start() -
+	   will never end (value 0x03 is kept shown in control byte).
+	   Simply manually poking 0x04 _once_ immediately successfully stops
+	   the hardware/ALSA interrupt activity. */
+	snd_azf3328_ctrl_outb(chip, IDX_IO_TIMER_VALUE + 3, 0x04);
 	spin_unlock_irqrestore(&chip->reg_lock, flags);
 	snd_azf3328_dbgcallleave();
 	return 0;
diff --git a/sound/pci/ctxfi/ctpcm.c b/sound/pci/ctxfi/ctpcm.c
index 85ab43e8921..457d21189b0 100644
--- a/sound/pci/ctxfi/ctpcm.c
+++ b/sound/pci/ctxfi/ctpcm.c
@@ -129,8 +129,6 @@ static int ct_pcm_playback_open(struct snd_pcm_substream *substream)
 
 	apcm->substream = substream;
 	apcm->interrupt = ct_atc_pcm_interrupt;
-	runtime->private_data = apcm;
-	runtime->private_free = ct_atc_pcm_free_substream;
 	if (IEC958 == substream->pcm->device) {
 		runtime->hw = ct_spdif_passthru_playback_hw;
 		atc->spdif_out_passthru(atc, 1);
@@ -155,8 +153,12 @@ static int ct_pcm_playback_open(struct snd_pcm_substream *substream)
 	}
 
 	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
-	if (!apcm->timer)
+	if (!apcm->timer) {
+		kfree(apcm);
 		return -ENOMEM;
+	}
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
 
 	return 0;
 }
@@ -278,8 +280,6 @@ static int ct_pcm_capture_open(struct snd_pcm_substream *substream)
 	apcm->started = 0;
 	apcm->substream = substream;
 	apcm->interrupt = ct_atc_pcm_interrupt;
-	runtime->private_data = apcm;
-	runtime->private_free = ct_atc_pcm_free_substream;
 	runtime->hw = ct_pcm_capture_hw;
 	runtime->hw.rate_max = atc->rsr * atc->msr;
 
@@ -298,8 +298,12 @@ static int ct_pcm_capture_open(struct snd_pcm_substream *substream)
 	}
 
 	apcm->timer = ct_timer_instance_new(atc->timer, apcm);
-	if (!apcm->timer)
+	if (!apcm->timer) {
+		kfree(apcm);
 		return -ENOMEM;
+	}
+	runtime->private_data = apcm;
+	runtime->private_free = ct_atc_pcm_free_substream;
 
 	return 0;
 }
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 644e3f14f8c..98b6d02a36c 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -1919,6 +1919,16 @@ struct snd_kcontrol *snd_hda_find_mixer_ctl(struct hda_codec *codec,
 }
 EXPORT_SYMBOL_HDA(snd_hda_find_mixer_ctl);
 
+static int find_empty_mixer_ctl_idx(struct hda_codec *codec, const char *name)
+{
+	int idx;
+	for (idx = 0; idx < 16; idx++) { /* 16 ctlrs should be large enough */
+		if (!_snd_hda_find_mixer_ctl(codec, name, idx))
+			return idx;
+	}
+	return -EBUSY;
+}
+
 /**
  * snd_hda_ctl_add - Add a control element and assign to the codec
  * @codec: HD-audio codec
@@ -2654,8 +2664,6 @@ static struct snd_kcontrol_new dig_mixes[] = {
 	{ } /* end */
 };
 
-#define SPDIF_MAX_IDX	4	/* 4 instances should be enough to probe */
-
 /**
  * snd_hda_create_spdif_out_ctls - create Output SPDIF-related controls
  * @codec: the HDA codec
@@ -2673,12 +2681,8 @@ int snd_hda_create_spdif_out_ctls(struct hda_codec *codec, hda_nid_t nid)
 	struct snd_kcontrol_new *dig_mix;
 	int idx;
 
-	for (idx = 0; idx < SPDIF_MAX_IDX; idx++) {
-		if (!_snd_hda_find_mixer_ctl(codec, "IEC958 Playback Switch",
-					     idx))
-			break;
-	}
-	if (idx >= SPDIF_MAX_IDX) {
+	idx = find_empty_mixer_ctl_idx(codec, "IEC958 Playback Switch");
+	if (idx < 0) {
 		printk(KERN_ERR "hda_codec: too many IEC958 outputs\n");
 		return -EBUSY;
 	}
@@ -2829,12 +2833,8 @@ int snd_hda_create_spdif_in_ctls(struct hda_codec *codec, hda_nid_t nid)
 	struct snd_kcontrol_new *dig_mix;
 	int idx;
 
-	for (idx = 0; idx < SPDIF_MAX_IDX; idx++) {
-		if (!_snd_hda_find_mixer_ctl(codec, "IEC958 Capture Switch",
-					     idx))
-			break;
-	}
-	if (idx >= SPDIF_MAX_IDX) {
+	idx = find_empty_mixer_ctl_idx(codec, "IEC958 Capture Switch");
+	if (idx < 0) {
 		printk(KERN_ERR "hda_codec: too many IEC958 inputs\n");
 		return -EBUSY;
 	}
@@ -3808,21 +3808,32 @@ int snd_hda_add_new_ctls(struct hda_codec *codec, struct snd_kcontrol_new *knew)
 
 	for (; knew->name; knew++) {
 		struct snd_kcontrol *kctl;
+		int addr = 0, idx = 0;
 		if (knew->iface == -1)	/* skip this codec private value */
 			continue;
-		kctl = snd_ctl_new1(knew, codec);
-		if (!kctl)
-			return -ENOMEM;
-		err = snd_hda_ctl_add(codec, 0, kctl);
-		if (err < 0) {
-			if (!codec->addr)
-				return err;
+		for (;;) {
 			kctl = snd_ctl_new1(knew, codec);
 			if (!kctl)
 				return -ENOMEM;
-			kctl->id.device = codec->addr;
+			if (addr > 0)
+				kctl->id.device = addr;
+			if (idx > 0)
+				kctl->id.index = idx;
 			err = snd_hda_ctl_add(codec, 0, kctl);
-			if (err < 0)
+			if (!err)
+				break;
+			/* try first with another device index corresponding to
+			 * the codec addr; if it still fails (or it's the
+			 * primary codec), then try another control index
+			 */
+			if (!addr && codec->addr)
+				addr = codec->addr;
+			else if (!idx && !knew->index) {
+				idx = find_empty_mixer_ctl_idx(codec,
+							       knew->name);
+				if (idx <= 0)
+					return err;
+			} else
 				return err;
 		}
 	}
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index cb0c23a6b47..4a663471dad 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -189,6 +189,9 @@ static void hdmi_update_short_audio_desc(struct cea_sad *a,
 	a->channels = GRAB_BITS(buf, 0, 0, 3);
 	a->channels++;
 
+	a->sample_bits = 0;
+	a->max_bitrate = 0;
+
 	a->format = GRAB_BITS(buf, 0, 3, 4);
 	switch (a->format) {
 	case AUDIO_CODING_TYPE_REF_STREAM_HEADER:
@@ -198,7 +201,6 @@ static void hdmi_update_short_audio_desc(struct cea_sad *a,
 
 	case AUDIO_CODING_TYPE_LPCM:
 		val = GRAB_BITS(buf, 2, 0, 3);
-		a->sample_bits = 0;
 		for (i = 0; i < 3; i++)
 			if (val & (1 << i))
 				a->sample_bits |= cea_sample_sizes[i + 1];
@@ -598,24 +600,19 @@ void hdmi_eld_update_pcm_info(struct hdmi_eld *eld, struct hda_pcm_stream *pcm,
 {
 	int i;
 
-	pcm->rates = 0;
-	pcm->formats = 0;
-	pcm->maxbps = 0;
-	pcm->channels_min = -1;
-	pcm->channels_max = 0;
+	/* assume basic audio support (the basic audio flag is not in ELD;
+	 * however, all audio capable sinks are required to support basic
+	 * audio) */
+	pcm->rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
+	pcm->formats = SNDRV_PCM_FMTBIT_S16_LE;
+	pcm->maxbps = 16;
+	pcm->channels_max = 2;
 	for (i = 0; i < eld->sad_count; i++) {
 		struct cea_sad *a = &eld->sad[i];
 		pcm->rates |= a->rates;
-		if (a->channels < pcm->channels_min)
-			pcm->channels_min = a->channels;
 		if (a->channels > pcm->channels_max)
 			pcm->channels_max = a->channels;
 		if (a->format == AUDIO_CODING_TYPE_LPCM) {
-			if (a->sample_bits & AC_SUPPCM_BITS_16) {
-				pcm->formats |= SNDRV_PCM_FMTBIT_S16_LE;
-				if (pcm->maxbps < 16)
-					pcm->maxbps = 16;
-			}
 			if (a->sample_bits & AC_SUPPCM_BITS_20) {
 				pcm->formats |= SNDRV_PCM_FMTBIT_S32_LE;
 				if (pcm->maxbps < 20)
@@ -635,7 +632,6 @@ void hdmi_eld_update_pcm_info(struct hdmi_eld *eld, struct hda_pcm_stream *pcm,
 	/* restrict the parameters by the values the codec provides */
 	pcm->rates &= codec_pars->rates;
 	pcm->formats &= codec_pars->formats;
-	pcm->channels_min = max(pcm->channels_min, codec_pars->channels_min);
 	pcm->channels_max = min(pcm->channels_max, codec_pars->channels_max);
 	pcm->maxbps = min(pcm->maxbps, codec_pars->maxbps);
 }
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 21aa9b0e28f..a1c4008af89 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2296,9 +2296,11 @@ static int azx_dev_free(struct snd_device *device)
  */
 static struct snd_pci_quirk position_fix_list[] __devinitdata = {
 	SND_PCI_QUIRK(0x1025, 0x009f, "Acer Aspire 5110", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1025, 0x026f, "Acer Aspire 5538", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
+	SND_PCI_QUIRK(0x1028, 0x0470, "Dell Inspiron 1120", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
 	SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 6361f752b5f..76bd58a0e2b 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -2116,8 +2116,8 @@ static void cxt5066_update_speaker(struct hda_codec *codec)
 	struct conexant_spec *spec = codec->spec;
 	unsigned int pinctl;
 
-	snd_printdd("CXT5066: update speaker, hp_present=%d\n",
-		spec->hp_present);
+	snd_printdd("CXT5066: update speaker, hp_present=%d, cur_eapd=%d\n",
+		    spec->hp_present, spec->cur_eapd);
 
 	/* Port A (HP) */
 	pinctl = ((spec->hp_present & 1) && spec->cur_eapd) ? PIN_HP : 0;
@@ -2125,11 +2125,20 @@ static void cxt5066_update_speaker(struct hda_codec *codec)
 			pinctl);
 
 	/* Port D (HP/LO) */
-	pinctl = ((spec->hp_present & 2) && spec->cur_eapd)
-		? spec->port_d_mode : 0;
-	/* Mute if Port A is connected on Thinkpad */
-	if (spec->thinkpad && (spec->hp_present & 1))
-		pinctl = 0;
+	if (spec->dell_automute) {
+		/* DELL AIO Port Rule: PortA>  PortD>  IntSpk */
+		pinctl = (!(spec->hp_present & 1) && spec->cur_eapd)
+			? PIN_OUT : 0;
+	} else if (spec->thinkpad) {
+		if (spec->cur_eapd)
+			pinctl = spec->port_d_mode;
+		/* Mute dock line-out if Port A (laptop HP) is present */
+		if (spec->hp_present&  1)
+			pinctl = 0;
+	} else {
+		pinctl = ((spec->hp_present & 2) && spec->cur_eapd)
+			? spec->port_d_mode : 0;
+	}
 	snd_hda_codec_write(codec, 0x1c, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
 			pinctl);
 
@@ -2137,14 +2146,6 @@ static void cxt5066_update_speaker(struct hda_codec *codec)
 	pinctl = (!spec->hp_present && spec->cur_eapd) ? PIN_OUT : 0;
 	snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
 			pinctl);
-
-	if (spec->dell_automute) {
-		/* DELL AIO Port Rule: PortA > PortD > IntSpk */
-		pinctl = (!(spec->hp_present & 1) && spec->cur_eapd)
-			? PIN_OUT : 0;
-		snd_hda_codec_write(codec, 0x1c, 0,
-			AC_VERB_SET_PIN_WIDGET_CONTROL, pinctl);
-	}
 }
 
 /* turn on/off EAPD (+ mute HP) as a master switch */
@@ -3095,11 +3096,11 @@ static const char *cxt5066_models[CXT5066_MODELS] = {
 static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK_MASK(0x1025, 0xff00, 0x0400, "Acer", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTRO),
-	SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
-		      CXT5066_DELL_LAPTOP),
+	SND_PCI_QUIRK(0x1028, 0x02f5, "Dell Vostro 320", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO),
 	SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP),
+	SND_PCI_QUIRK(0x1043, 0x13f3, "Asus A52J", CXT5066_HP_LAPTOP),
 	SND_PCI_QUIRK(0x1179, 0xff1e, "Toshiba Satellite C650D", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x1179, 0xff50, "Toshiba Satellite P500-PSPGSC-01800T", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x1179, 0xffe0, "Toshiba Satellite Pro T130-15F", CXT5066_OLPC_XO_1_5),
@@ -3108,8 +3109,10 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD),
+	SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD),
+	SND_PCI_QUIRK(0x17aa, 0x21c8, "Thinkpad Edge 11", CXT5066_IDEAPAD),
  	SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD),
  	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G series", CXT5066_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x390a, "Lenovo S10-3t", CXT5066_IDEAPAD),
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index d3e49aa5b9e..31df7747990 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -834,7 +834,6 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo,
 			return -ENODEV;
 	} else {
 		/* fallback to the codec default */
-		hinfo->channels_min = codec_pars->channels_min;
 		hinfo->channels_max = codec_pars->channels_max;
 		hinfo->rates = codec_pars->rates;
 		hinfo->formats = codec_pars->formats;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 5f00589cb79..552a09e9211 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1614,6 +1614,7 @@ do_sku:
 		spec->init_amp = ALC_INIT_GPIO3;
 		break;
 	case 5:
+	default:
 		spec->init_amp = ALC_INIT_DEFAULT;
 		break;
 	}
@@ -2014,6 +2015,36 @@ static struct hda_verb alc888_acer_aspire_6530g_verbs[] = {
 };
 
 /*
+ *ALC888 Acer Aspire 7730G model
+ */
+
+static struct hda_verb alc888_acer_aspire_7730G_verbs[] = {
+/* Bias voltage on for external mic port */
+	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN | PIN_VREF80},
+/* Front Mic: set to PIN_IN (empty by default) */
+	{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+	{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
+/* Enable unsolicited event for HP jack */
+	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+/* Enable speaker output */
+	{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
+/* Enable headphone output */
+	{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | PIN_HP},
+	{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+	{0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
+/*Enable internal subwoofer */
+	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+	{0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x17, AC_VERB_SET_CONNECT_SEL, 0x02},
+	{0x17, AC_VERB_SET_EAPD_BTLENABLE, 2},
+	{ }
+};
+
+/*
  * ALC889 Acer Aspire 8930G model
  */
 
@@ -2200,6 +2231,16 @@ static void alc888_acer_aspire_6530g_setup(struct hda_codec *codec)
 	spec->autocfg.speaker_pins[2] = 0x17;
 }
 
+static void alc888_acer_aspire_7730g_setup(struct hda_codec *codec)
+{
+	struct alc_spec *spec = codec->spec;
+
+	spec->autocfg.hp_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x14;
+	spec->autocfg.speaker_pins[1] = 0x16;
+	spec->autocfg.speaker_pins[2] = 0x17;
+}
+
 static void alc889_acer_aspire_8930g_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -4554,6 +4595,7 @@ static struct snd_pci_quirk alc880_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1734, 0x10b0, "Fujitsu", ALC880_FUJITSU),
 	SND_PCI_QUIRK(0x1854, 0x0018, "LG LW20", ALC880_LG_LW),
 	SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_LG),
+	SND_PCI_QUIRK(0x1854, 0x005f, "LG P1 Express", ALC880_LG),
 	SND_PCI_QUIRK(0x1854, 0x0068, "LG w1", ALC880_LG),
 	SND_PCI_QUIRK(0x1854, 0x0077, "LG LW25", ALC880_LG_LW),
 	SND_PCI_QUIRK(0x19db, 0x4188, "TCL S700", ALC880_TCL_S700),
@@ -9524,13 +9566,6 @@ static struct hda_verb alc883_acer_eapd_verbs[] = {
 	{ }
 };
 
-static struct hda_verb alc888_acer_aspire_7730G_verbs[] = {
-	{0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
-	{0x17, AC_VERB_SET_CONNECT_SEL, 0x02},
-	{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
-	{ } /* end */
-};
-
 static void alc888_6st_dell_setup(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
@@ -9831,7 +9866,6 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763),
 	SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763),
 	SND_PCI_QUIRK(0x17aa, 0x101d, "Lenovo Sky", ALC888_LENOVO_SKY),
-	SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
 	SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG),
 	SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG),
 	SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
@@ -10328,7 +10362,7 @@ static struct alc_config_preset alc882_presets[] = {
 		.const_channel_count = 6,
 		.input_mux = &alc883_capture_source,
 		.unsol_event = alc_automute_amp_unsol_event,
-		.setup = alc888_acer_aspire_6530g_setup,
+		.setup = alc888_acer_aspire_7730g_setup,
 		.init_hook = alc_automute_amp,
 	},
 	[ALC883_MEDION] = {
@@ -10796,7 +10830,8 @@ static int alc_auto_add_mic_boost(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
 	struct auto_pin_cfg *cfg = &spec->autocfg;
-	int i, err;
+	int i, err, type;
+	int type_idx = 0;
 	hda_nid_t nid;
 
 	for (i = 0; i < cfg->num_inputs; i++) {
@@ -10805,9 +10840,15 @@ static int alc_auto_add_mic_boost(struct hda_codec *codec)
 		nid = cfg->inputs[i].pin;
 		if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP) {
 			char label[32];
+			type = cfg->inputs[i].type;
+			if (i > 0 && type == cfg->inputs[i - 1].type)
+				type_idx++;
+			else
+				type_idx = 0;
 			snprintf(label, sizeof(label), "%s Boost",
 				 hda_get_autocfg_input_label(codec, cfg, i));
-			err = add_control(spec, ALC_CTL_WIDGET_VOL, label, 0,
+			err = add_control(spec, ALC_CTL_WIDGET_VOL, label,
+					  type_idx,
 				  HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
 			if (err < 0)
 				return err;
@@ -14623,7 +14664,10 @@ static int alc275_setup_dual_adc(struct hda_codec *codec)
 /* different alc269-variants */
 enum {
 	ALC269_TYPE_NORMAL,
+	ALC269_TYPE_ALC258,
 	ALC269_TYPE_ALC259,
+	ALC269_TYPE_ALC269VB,
+	ALC269_TYPE_ALC270,
 	ALC269_TYPE_ALC271X,
 };
 
@@ -14762,7 +14806,10 @@ static int alc269_resume(struct hda_codec *codec)
 
 enum {
 	ALC269_FIXUP_SONY_VAIO,
+	ALC275_FIX_SONY_VAIO_GPIO2,
 	ALC269_FIXUP_DELL_M101Z,
+	ALC269_FIXUP_SKU_IGNORE,
+	ALC269_FIXUP_ASUS_G73JW,
 };
 
 static const struct alc_fixup alc269_fixups[] = {
@@ -14772,6 +14819,14 @@ static const struct alc_fixup alc269_fixups[] = {
 			{}
 		}
 	},
+	[ALC275_FIX_SONY_VAIO_GPIO2] = {
+		.verbs = (const struct hda_verb[]) {
+			{0x01, AC_VERB_SET_GPIO_MASK, 0x04},
+			{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x04},
+			{0x01, AC_VERB_SET_GPIO_DATA, 0x00},
+			{ }
+		}
+	},
 	[ALC269_FIXUP_DELL_M101Z] = {
 		.verbs = (const struct hda_verb[]) {
 			/* Enables internal speaker */
@@ -14780,11 +14835,26 @@ static const struct alc_fixup alc269_fixups[] = {
 			{}
 		}
 	},
+	[ALC269_FIXUP_SKU_IGNORE] = {
+		.sku = ALC_FIXUP_SKU_IGNORE,
+	},
+	[ALC269_FIXUP_ASUS_G73JW] = {
+		.pins = (const struct alc_pincfg[]) {
+			{ 0x17, 0x99130111 }, /* subwoofer */
+			{ }
+		}
+	},
 };
 
 static struct snd_pci_quirk alc269_fixup_tbl[] = {
+	SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIX_SONY_VAIO_GPIO2),
+	SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIX_SONY_VAIO_GPIO2),
+	SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIX_SONY_VAIO_GPIO2),
 	SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
 	SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+	SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_SKU_IGNORE),
+	SND_PCI_QUIRK(0x17aa, 0x20f2, "Thinkpad SL410/510", ALC269_FIXUP_SKU_IGNORE),
+	SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
 	{}
 };
 
@@ -15023,7 +15093,7 @@ static int alc269_fill_coef(struct hda_codec *codec)
 static int patch_alc269(struct hda_codec *codec)
 {
 	struct alc_spec *spec;
-	int board_config;
+	int board_config, coef;
 	int err;
 
 	spec = kzalloc(sizeof(*spec), GFP_KERNEL);
@@ -15034,19 +15104,29 @@ static int patch_alc269(struct hda_codec *codec)
 
 	alc_auto_parse_customize_define(codec);
 
-	if ((alc_read_coef_idx(codec, 0) & 0x00f0) == 0x0010){
-		if (codec->bus->pci->subsystem_vendor == 0x1025 &&
-		    spec->cdefine.platform_type == 1) {
-			alc_codec_rename(codec, "ALC271X");
-			spec->codec_variant = ALC269_TYPE_ALC271X;
-		} else {
-			alc_codec_rename(codec, "ALC259");
-			spec->codec_variant = ALC269_TYPE_ALC259;
-		}
-	} else
-		alc_fix_pll_init(codec, 0x20, 0x04, 15);
-
-	alc269_fill_coef(codec);
+	if (codec->vendor_id == 0x10ec0269) {
+		coef = alc_read_coef_idx(codec, 0);
+		if ((coef & 0x00f0) == 0x0010) {
+			if (codec->bus->pci->subsystem_vendor == 0x1025 &&
+			    spec->cdefine.platform_type == 1) {
+				alc_codec_rename(codec, "ALC271X");
+				spec->codec_variant = ALC269_TYPE_ALC271X;
+			} else if ((coef & 0xf000) == 0x1000) {
+				spec->codec_variant = ALC269_TYPE_ALC270;
+			} else if ((coef & 0xf000) == 0x2000) {
+				alc_codec_rename(codec, "ALC259");
+				spec->codec_variant = ALC269_TYPE_ALC259;
+			} else if ((coef & 0xf000) == 0x3000) {
+				alc_codec_rename(codec, "ALC258");
+				spec->codec_variant = ALC269_TYPE_ALC258;
+			} else {
+				alc_codec_rename(codec, "ALC269VB");
+				spec->codec_variant = ALC269_TYPE_ALC269VB;
+			}
+		} else
+			alc_fix_pll_init(codec, 0x20, 0x04, 15);
+		alc269_fill_coef(codec);
+	}
 
 	board_config = snd_hda_check_board_config(codec, ALC269_MODEL_LAST,
 						  alc269_models,
@@ -15104,7 +15184,7 @@ static int patch_alc269(struct hda_codec *codec)
 	spec->stream_digital_capture = &alc269_pcm_digital_capture;
 
 	if (!spec->adc_nids) { /* wasn't filled automatically? use default */
-		if (spec->codec_variant != ALC269_TYPE_NORMAL) {
+		if (spec->codec_variant == ALC269_TYPE_NORMAL) {
 			spec->adc_nids = alc269_adc_nids;
 			spec->num_adc_nids = ARRAY_SIZE(alc269_adc_nids);
 			spec->capsrc_nids = alc269_capsrc_nids;
@@ -16898,7 +16978,7 @@ static struct alc_config_preset alc861vd_presets[] = {
 static int alc861vd_auto_create_input_ctls(struct hda_codec *codec,
 						const struct auto_pin_cfg *cfg)
 {
-	return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0);
+	return alc_auto_create_input_ctls(codec, cfg, 0x0b, 0x22, 0);
 }
 
 
@@ -18952,6 +19032,8 @@ static inline hda_nid_t alc662_mix_to_dac(hda_nid_t nid)
 		return 0x02;
 	else if (nid >= 0x0c && nid <= 0x0e)
 		return nid - 0x0c + 0x02;
+	else if (nid == 0x26) /* ALC887-VD has this DAC too */
+		return 0x25;
 	else
 		return 0;
 }
@@ -18960,7 +19042,7 @@ static inline hda_nid_t alc662_mix_to_dac(hda_nid_t nid)
 static hda_nid_t alc662_dac_to_mix(struct hda_codec *codec, hda_nid_t pin,
 				   hda_nid_t dac)
 {
-	hda_nid_t mix[4];
+	hda_nid_t mix[5];
 	int i, num;
 
 	num = snd_hda_get_connections(codec, pin, mix, ARRAY_SIZE(mix));
@@ -19298,6 +19380,7 @@ static const struct alc_fixup alc662_fixups[] = {
 
 static struct snd_pci_quirk alc662_fixup_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
+	SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD),
 	{}
@@ -19419,7 +19502,10 @@ static int patch_alc888(struct hda_codec *codec)
 {
 	if ((alc_read_coef_idx(codec, 0) & 0x00f0)==0x0030){
 		kfree(codec->chip_name);
-		codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL);
+		if (codec->vendor_id == 0x10ec0887)
+			codec->chip_name = kstrdup("ALC887-VD", GFP_KERNEL);
+		else
+			codec->chip_name = kstrdup("ALC888-VD", GFP_KERNEL);
 		if (!codec->chip_name) {
 			alc_free(codec);
 			return -ENOMEM;
@@ -19909,7 +19995,7 @@ static struct hda_codec_preset snd_hda_preset_realtek[] = {
 	{ .id = 0x10ec0885, .rev = 0x100103, .name = "ALC889A",
 	  .patch = patch_alc882 },
 	{ .id = 0x10ec0885, .name = "ALC885", .patch = patch_alc882 },
-	{ .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc882 },
+	{ .id = 0x10ec0887, .name = "ALC887", .patch = patch_alc888 },
 	{ .id = 0x10ec0888, .rev = 0x100101, .name = "ALC1200",
 	  .patch = patch_alc882 },
 	{ .id = 0x10ec0888, .name = "ALC888", .patch = patch_alc888 },
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 93fa59cc60e..f03b2ff9049 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -389,6 +389,11 @@ static hda_nid_t stac92hd83xxx_dmic_nids[STAC92HD83XXX_NUM_DMICS + 1] = {
 	0x11, 0x20, 0
 };
 
+#define STAC92HD87B_NUM_DMICS	 1
+static hda_nid_t stac92hd87b_dmic_nids[STAC92HD87B_NUM_DMICS + 1] = {
+	0x11, 0
+};
+
 #define STAC92HD83XXX_NUM_CAPS	2
 static unsigned long stac92hd83xxx_capvols[] = {
 	HDA_COMPOSE_AMP_VAL(0x17, 3, 0, HDA_OUTPUT),
@@ -1622,6 +1627,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
 static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = {
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1,
 		      "Alienware M17x", STAC_ALIENWARE_M17X),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x043a,
+		      "Alienware M17x", STAC_ALIENWARE_M17X),
 	{} /* terminator */
 };
 
@@ -3474,6 +3481,8 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec,
 
 		label = hda_get_input_pin_label(codec, nid, 1);
 		snd_hda_add_imux_item(dimux, label, index, &type_idx);
+		if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1)
+			snd_hda_add_imux_item(imux, label, index, &type_idx);
 
 		err = create_elem_capture_vol(codec, nid, label, type_idx,
 					      HDA_INPUT);
@@ -3485,11 +3494,6 @@ static int stac92xx_auto_create_dmic_input_ctls(struct hda_codec *codec,
 			if (err < 0)
 				return err;
 		}
-
-		if (snd_hda_get_bool_hint(codec, "separate_dmux") != 1) {
-			snd_hda_add_imux_item(imux, label, index, NULL);
-			spec->num_analog_muxes++;
-		}
 	}
 
 	return 0;
@@ -5452,12 +5456,17 @@ again:
 				stac92hd83xxx_brd_tbl[spec->board_config]);
 
 	switch (codec->vendor_id) {
+	case 0x111d76d1:
+	case 0x111d76d9:
+		spec->dmic_nids = stac92hd87b_dmic_nids;
+		spec->num_dmics = stac92xx_connected_ports(codec,
+				stac92hd87b_dmic_nids,
+				STAC92HD87B_NUM_DMICS);
+		/* Fall through */
 	case 0x111d7666:
 	case 0x111d7667:
 	case 0x111d7668:
 	case 0x111d7669:
-	case 0x111d76d1:
-	case 0x111d76d9:
 		spec->num_pins = ARRAY_SIZE(stac92hd88xxx_pin_nids);
 		spec->pin_nids = stac92hd88xxx_pin_nids;
 		spec->mono_nid = 0;
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 400f9ebd243..629a5494347 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1866,6 +1866,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = {
 	},
 	{
 		.subvendor = 0x1028,
+		.subdevice = 0x0182,
+		.name = "Dell Latitude D610",	/* STAC9750/51 */
+		.type = AC97_TUNE_HP_ONLY
+	},
+	{
+		.subvendor = 0x1028,
 		.subdevice = 0x0186,
 		.name = "Dell Latitude D810", /* cf. Malone #41015 */
 		.type = AC97_TUNE_HP_MUTE_LED
diff --git a/sound/pci/mixart/mixart_hwdep.h b/sound/pci/mixart/mixart_hwdep.h
index a46f5083db9..812e288ef2e 100644
--- a/sound/pci/mixart/mixart_hwdep.h
+++ b/sound/pci/mixart/mixart_hwdep.h
@@ -25,11 +25,21 @@
 
 #include <sound/hwdep.h>
 
+#ifndef readl_be
 #define readl_be(x) be32_to_cpu(__raw_readl(x))
+#endif
+
+#ifndef writel_be
 #define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr)
+#endif
 
+#ifndef readl_le
 #define readl_le(x) le32_to_cpu(__raw_readl(x))
+#endif
+
+#ifndef writel_le
 #define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr)
+#endif
 
 #define MIXART_MEM(mgr,x)	((mgr)->mem[0].virt + (x))
 #define MIXART_REG(mgr,x)	((mgr)->mem[1].virt + (x))
diff --git a/sound/ppc/pmac.c b/sound/ppc/pmac.c
index 85081172403..b47cfd45b3b 100644
--- a/sound/ppc/pmac.c
+++ b/sound/ppc/pmac.c
@@ -1228,10 +1228,8 @@ int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
 					       chip->rsrc[i].start + 1,
 					       rnames[i]) == NULL) {
 				printk(KERN_ERR "snd: can't request rsrc "
-				       " %d (%s: 0x%016llx:%016llx)\n",
-				       i, rnames[i],
-				       (unsigned long long)chip->rsrc[i].start,
-				       (unsigned long long)chip->rsrc[i].end);
+				       " %d (%s: %pR)\n",
+				       i, rnames[i], &chip->rsrc[i]);
 				err = -ENODEV;
 				goto __error;
 			}
@@ -1256,10 +1254,8 @@ int __devinit snd_pmac_new(struct snd_card *card, struct snd_pmac **chip_return)
 					       chip->rsrc[i].start + 1,
 					       rnames[i]) == NULL) {
 				printk(KERN_ERR "snd: can't request rsrc "
-				       " %d (%s: 0x%016llx:%016llx)\n",
-				       i, rnames[i],
-				       (unsigned long long)chip->rsrc[i].start,
-				       (unsigned long long)chip->rsrc[i].end);
+				       " %d (%s: %pR)\n",
+				       i, rnames[i], &chip->rsrc[i]);
 				err = -ENODEV;
 				goto __error;
 			}
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index e720d5e6f04..bee3c94f58b 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -16,7 +16,8 @@ config SND_ATMEL_SOC_SSC
 
 config SND_AT91_SOC_SAM9G20_WM8731
 	tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
-	depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC
+	depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC && \
+                   AT91_PROGRAMMABLE_CLOCKS
 	select SND_ATMEL_SOC_SSC
 	select SND_SOC_WM8731
 	help
@@ -25,7 +26,7 @@ config SND_AT91_SOC_SAM9G20_WM8731
 
 config SND_AT32_SOC_PLAYPAQ
         tristate "SoC Audio support for PlayPaq with WM8510"
-        depends on SND_ATMEL_SOC && BOARD_PLAYPAQ
+        depends on SND_ATMEL_SOC && BOARD_PLAYPAQ && AT91_PROGRAMMABLE_CLOCKS
         select SND_ATMEL_SOC_SSC
         select SND_SOC_WM8510
         help
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index 293569dfd0e..e521ada8054 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -222,9 +222,9 @@ static int __init at91sam9g20ek_init(void)
 	}
 
 	pllb = clk_get(NULL, "pllb");
-	if (IS_ERR(mclk)) {
+	if (IS_ERR(pllb)) {
 		printk(KERN_ERR "ASoC: Failed to get PLLB\n");
-		ret = PTR_ERR(mclk);
+		ret = PTR_ERR(pllb);
 		goto err_mclk;
 	}
 	ret = clk_set_parent(mclk, pllb);
@@ -240,6 +240,7 @@ static int __init at91sam9g20ek_init(void)
 	if (!at91sam9g20ek_snd_device) {
 		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
 		ret = -ENOMEM;
+		goto err_mclk;
 	}
 
 	platform_set_drvdata(at91sam9g20ek_snd_device,
@@ -248,11 +249,13 @@ static int __init at91sam9g20ek_init(void)
 	ret = platform_device_add(at91sam9g20ek_snd_device);
 	if (ret) {
 		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
-		platform_device_put(at91sam9g20ek_snd_device);
+		goto err_device_add;
 	}
 
 	return ret;
 
+err_device_add:
+	platform_device_put(at91sam9g20ek_snd_device);
 err_mclk:
 	clk_put(mclk);
 	mclk = NULL;
diff --git a/sound/soc/atmel/snd-soc-afeb9260.c b/sound/soc/atmel/snd-soc-afeb9260.c
index e3d283561c1..86e0f8586dc 100644
--- a/sound/soc/atmel/snd-soc-afeb9260.c
+++ b/sound/soc/atmel/snd-soc-afeb9260.c
@@ -167,7 +167,6 @@ static int __init afeb9260_soc_init(void)
 
 	return 0;
 err1:
-	platform_device_del(afeb9260_snd_device);
 	platform_device_put(afeb9260_snd_device);
 	return err;
 }
diff --git a/sound/soc/codecs/max98088.c b/sound/soc/codecs/max98088.c
index bc22ee93a75..6447dbb2f12 100644
--- a/sound/soc/codecs/max98088.c
+++ b/sound/soc/codecs/max98088.c
@@ -28,6 +28,11 @@
 #include <sound/max98088.h>
 #include "max98088.h"
 
+enum max98088_type {
+       MAX98088,
+       MAX98089,
+};
+
 struct max98088_cdata {
        unsigned int rate;
        unsigned int fmt;
@@ -35,7 +40,7 @@ struct max98088_cdata {
 };
 
 struct max98088_priv {
-       u8 reg_cache[M98088_REG_CNT];
+       enum max98088_type devtype;
        void *control_data;
        struct max98088_pdata *pdata;
        unsigned int sysclk;
@@ -1582,7 +1587,7 @@ static int max98088_dai2_set_fmt(struct snd_soc_dai *codec_dai,
 
 static void max98088_sync_cache(struct snd_soc_codec *codec)
 {
-       struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
+       u16 *reg_cache = codec->reg_cache;
        int i;
 
        if (!codec->cache_sync)
@@ -1593,14 +1598,14 @@ static void max98088_sync_cache(struct snd_soc_codec *codec)
        /* write back cached values if they're writeable and
         * different from the hardware default.
         */
-       for (i = 1; i < ARRAY_SIZE(max98088->reg_cache); i++) {
+       for (i = 1; i < codec->driver->reg_cache_size; i++) {
                if (!max98088_access[i].writable)
                        continue;
 
-               if (max98088->reg_cache[i] == max98088_reg[i])
+               if (reg_cache[i] == max98088_reg[i])
                        continue;
 
-               snd_soc_write(codec, i, max98088->reg_cache[i]);
+               snd_soc_write(codec, i, reg_cache[i]);
        }
 
        codec->cache_sync = 0;
@@ -1945,7 +1950,6 @@ static int max98088_probe(struct snd_soc_codec *codec)
        int ret = 0;
 
        codec->cache_sync = 1;
-       memcpy(codec->reg_cache, max98088_reg, sizeof(max98088_reg));
 
        ret = snd_soc_codec_set_cache_io(codec, 8, 8, SND_SOC_I2C);
        if (ret != 0) {
@@ -2013,7 +2017,10 @@ err_access:
 
 static int max98088_remove(struct snd_soc_codec *codec)
 {
+       struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
+
        max98088_set_bias_level(codec, SND_SOC_BIAS_OFF);
+       kfree(max98088->eq_texts);
 
        return 0;
 }
@@ -2040,6 +2047,8 @@ static int max98088_i2c_probe(struct i2c_client *i2c,
        if (max98088 == NULL)
                return -ENOMEM;
 
+       max98088->devtype = id->driver_data;
+
        i2c_set_clientdata(i2c, max98088);
        max98088->control_data = i2c;
        max98088->pdata = i2c->dev.platform_data;
@@ -2059,7 +2068,8 @@ static int __devexit max98088_i2c_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id max98088_i2c_id[] = {
-       { "max98088", 0 },
+       { "max98088", MAX98088 },
+       { "max98089", MAX98089 },
        { }
 };
 MODULE_DEVICE_TABLE(i2c, max98088_i2c_id);
diff --git a/sound/soc/codecs/stac9766.c b/sound/soc/codecs/stac9766.c
index 00d67cc8e20..061f9e5a497 100644
--- a/sound/soc/codecs/stac9766.c
+++ b/sound/soc/codecs/stac9766.c
@@ -383,6 +383,7 @@ static struct snd_soc_codec_driver soc_codec_dev_stac9766 = {
 	.reg_cache_size = sizeof(stac9766_reg),
 	.reg_word_size = sizeof(u16),
 	.reg_cache_step = 2,
+	.reg_cache_default = stac9766_reg,
 };
 
 static __devinit int stac9766_probe(struct platform_device *pdev)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index fc687790188..77b8f9ae29b 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1176,7 +1176,7 @@ EXPORT_SYMBOL_GPL(aic3x_set_gpio);
 int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio)
 {
 	u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
-	u8 val, bit = gpio ? 2: 1;
+	u8 val = 0, bit = gpio ? 2 : 1;
 
 	aic3x_read(codec, reg, &val);
 	return (val >> bit) & 1;
@@ -1204,7 +1204,7 @@ EXPORT_SYMBOL_GPL(aic3x_set_headset_detection);
 
 int aic3x_headset_detected(struct snd_soc_codec *codec)
 {
-	u8 val;
+	u8 val = 0;
 	aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
 	return (val >> 4) & 1;
 }
@@ -1212,7 +1212,7 @@ EXPORT_SYMBOL_GPL(aic3x_headset_detected);
 
 int aic3x_button_pressed(struct snd_soc_codec *codec)
 {
-	u8 val;
+	u8 val = 0;
 	aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
 	return (val >> 5) & 1;
 }
diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c
index ee4fb201de6..d2c24309567 100644
--- a/sound/soc/codecs/tpa6130a2.c
+++ b/sound/soc/codecs/tpa6130a2.c
@@ -78,8 +78,10 @@ static int tpa6130a2_i2c_write(int reg, u8 value)
 
 	if (data->power_state) {
 		val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value);
-		if (val < 0)
+		if (val < 0) {
 			dev_err(&tpa6130a2_client->dev, "Write failed\n");
+			return val;
+		}
 	}
 
 	/* Either powered on or off, we save the context */
diff --git a/sound/soc/codecs/uda134x.c b/sound/soc/codecs/uda134x.c
index 7540a509a6f..464f0cfa4c7 100644
--- a/sound/soc/codecs/uda134x.c
+++ b/sound/soc/codecs/uda134x.c
@@ -597,6 +597,7 @@ static struct snd_soc_codec_driver soc_codec_dev_uda134x = {
 	.resume =       uda134x_soc_resume,
 	.reg_cache_size = sizeof(uda134x_reg),
 	.reg_word_size = sizeof(u8),
+	.reg_cache_default = uda134x_reg,
 	.reg_cache_step = 1,
 	.read = uda134x_read_reg_cache,
 	.write = uda134x_write,
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index f4f1fba38eb..7611add7f8c 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -831,7 +831,7 @@ static int wm8350_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 	}
 
 	/* MCLK direction */
-	if (dir == WM8350_MCLK_DIR_OUT)
+	if (dir == SND_SOC_CLOCK_OUT)
 		wm8350_set_bits(wm8350, WM8350_CLOCK_CONTROL_2,
 				WM8350_MCLK_DIR);
 	else
@@ -1586,6 +1586,13 @@ static  int wm8350_codec_probe(struct snd_soc_codec *codec)
 	wm8350_set_bits(wm8350, WM8350_ROUT2_VOLUME,
 			WM8350_OUT2_VU | WM8350_OUT2R_MUTE);
 
+	/* Make sure AIF tristating is disabled by default */
+	wm8350_clear_bits(wm8350, WM8350_AI_FORMATING, WM8350_AIF_TRI);
+
+	/* Make sure we've got a sane companding setup too */
+	wm8350_clear_bits(wm8350, WM8350_ADC_DAC_COMP,
+			  WM8350_DAC_COMP | WM8350_LOOPBACK);
+
 	/* Make sure jack detect is disabled to start off with */
 	wm8350_clear_bits(wm8350, WM8350_JACK_DETECT,
 			  WM8350_JDL_ENA | WM8350_JDR_ENA);
diff --git a/sound/soc/codecs/wm8523.c b/sound/soc/codecs/wm8523.c
index 712ef7c76f9..deca79ea2b4 100644
--- a/sound/soc/codecs/wm8523.c
+++ b/sound/soc/codecs/wm8523.c
@@ -41,7 +41,6 @@ static const char *wm8523_supply_names[WM8523_NUM_SUPPLIES] = {
 /* codec private data */
 struct wm8523_priv {
 	enum snd_soc_control_type control_type;
-	u16 reg_cache[WM8523_REGISTER_COUNT];
 	struct regulator_bulk_data supplies[WM8523_NUM_SUPPLIES];
 	unsigned int sysclk;
 	unsigned int rate_constraint_list[WM8523_NUM_RATES];
@@ -146,7 +145,6 @@ static int wm8523_startup(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	return 0;
 	snd_pcm_hw_constraint_list(substream->runtime, 0,
 				   SNDRV_PCM_HW_PARAM_RATE,
 				   &wm8523->rate_constraint);
@@ -315,6 +313,7 @@ static int wm8523_set_bias_level(struct snd_soc_codec *codec,
 				 enum snd_soc_bias_level level)
 {
 	struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
+	u16 *reg_cache = codec->reg_cache;
 	int ret, i;
 
 	switch (level) {
@@ -345,7 +344,7 @@ static int wm8523_set_bias_level(struct snd_soc_codec *codec,
 			/* Sync back default/cached values */
 			for (i = WM8523_AIF_CTRL1;
 			     i < WM8523_MAX_REGISTER; i++)
-				snd_soc_write(codec, i, wm8523->reg_cache[i]);
+				snd_soc_write(codec, i, reg_cache[i]);
 
 
 			msleep(100);
@@ -415,6 +414,7 @@ static int wm8523_resume(struct snd_soc_codec *codec)
 static int wm8523_probe(struct snd_soc_codec *codec)
 {
 	struct wm8523_priv *wm8523 = snd_soc_codec_get_drvdata(codec);
+	u16 *reg_cache = codec->reg_cache;
 	int ret, i;
 
 	codec->hw_write = (hw_write_t)i2c_master_send;
@@ -471,8 +471,8 @@ static int wm8523_probe(struct snd_soc_codec *codec)
 	}
 
 	/* Change some default settings - latch VU and enable ZC */
-	wm8523->reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
-	wm8523->reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
+	reg_cache[WM8523_DAC_GAINR] |= WM8523_DACR_VU;
+	reg_cache[WM8523_DAC_CTRL3] |= WM8523_ZC;
 
 	wm8523_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c
index a2e0ed59b37..8725d4e7543 100644
--- a/sound/soc/codecs/wm8580.c
+++ b/sound/soc/codecs/wm8580.c
@@ -161,7 +161,7 @@
 static const u16 wm8580_reg[] = {
 	0x0121, 0x017e, 0x007d, 0x0014, /*R3*/
 	0x0121, 0x017e, 0x007d, 0x0194, /*R7*/
-	0x001c, 0x0002, 0x0002, 0x00c2, /*R11*/
+	0x0010, 0x0002, 0x0002, 0x00c2, /*R11*/
 	0x0182, 0x0082, 0x000a, 0x0024, /*R15*/
 	0x0009, 0x0000, 0x00ff, 0x0000, /*R19*/
 	0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R23*/
@@ -491,16 +491,16 @@ static int wm8580_paif_hw_params(struct snd_pcm_substream *substream,
 		paifa |= 0x8;
 		break;
 	case SNDRV_PCM_FORMAT_S20_3LE:
-		paifa |= 0x10;
+		paifa |= 0x0;
 		paifb |= WM8580_AIF_LENGTH_20;
 		break;
 	case SNDRV_PCM_FORMAT_S24_LE:
-		paifa |= 0x10;
+		paifa |= 0x0;
 		paifb |= WM8580_AIF_LENGTH_24;
 		break;
 	case SNDRV_PCM_FORMAT_S32_LE:
-		paifa |= 0x10;
-		paifb |= WM8580_AIF_LENGTH_24;
+		paifa |= 0x0;
+		paifb |= WM8580_AIF_LENGTH_32;
 		break;
 	default:
 		return -EINVAL;
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 631385802eb..e725c09a3e7 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -526,7 +526,7 @@ static int wm8731_probe(struct snd_soc_codec *codec)
 	snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
 
 	/* Disable bypass path by default */
-	snd_soc_update_bits(codec, WM8731_APANA, 0x4, 0);
+	snd_soc_update_bits(codec, WM8731_APANA, 0x8, 0);
 
 	snd_soc_add_controls(codec, wm8731_snd_controls,
 			     ARRAY_SIZE(wm8731_snd_controls));
diff --git a/sound/soc/codecs/wm8741.c b/sound/soc/codecs/wm8741.c
index 90e31e9aa6f..aea60ef8aba 100644
--- a/sound/soc/codecs/wm8741.c
+++ b/sound/soc/codecs/wm8741.c
@@ -41,7 +41,6 @@ static const char *wm8741_supply_names[WM8741_NUM_SUPPLIES] = {
 /* codec private data */
 struct wm8741_priv {
 	enum snd_soc_control_type control_type;
-	u16 reg_cache[WM8741_REGISTER_COUNT];
 	struct regulator_bulk_data supplies[WM8741_NUM_SUPPLIES];
 	unsigned int sysclk;
 	struct snd_pcm_hw_constraint_list *sysclk_constraints;
@@ -422,6 +421,7 @@ static int wm8741_resume(struct snd_soc_codec *codec)
 static int wm8741_probe(struct snd_soc_codec *codec)
 {
 	struct wm8741_priv *wm8741 = snd_soc_codec_get_drvdata(codec);
+	u16 *reg_cache = codec->reg_cache;
 	int ret = 0;
 
 	ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8741->control_type);
@@ -437,10 +437,10 @@ static int wm8741_probe(struct snd_soc_codec *codec)
 	}
 
 	/* Change some default settings - latch VU */
-	wm8741->reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL;
-	wm8741->reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM;
-	wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL;
-	wm8741->reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM;
+	reg_cache[WM8741_DACLLSB_ATTENUATION] |= WM8741_UPDATELL;
+	reg_cache[WM8741_DACLMSB_ATTENUATION] |= WM8741_UPDATELM;
+	reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERL;
+	reg_cache[WM8741_DACRLSB_ATTENUATION] |= WM8741_UPDATERM;
 
 	snd_soc_add_controls(codec, wm8741_snd_controls,
 			     ARRAY_SIZE(wm8741_snd_controls));
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 8f679a13f2b..87caae59e93 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -65,22 +65,22 @@ static void wm8753_set_dai_mode(struct snd_soc_codec *codec,
  * are using 2 wire for device control, so we cache them instead.
  */
 static const u16 wm8753_reg[] = {
-	0x0008, 0x0000, 0x000a, 0x000a,
-	0x0033, 0x0000, 0x0007, 0x00ff,
-	0x00ff, 0x000f, 0x000f, 0x007b,
-	0x0000, 0x0032, 0x0000, 0x00c3,
-	0x00c3, 0x00c0, 0x0000, 0x0000,
+	0x0000, 0x0008, 0x0000, 0x000a,
+	0x000a, 0x0033, 0x0000, 0x0007,
+	0x00ff, 0x00ff, 0x000f, 0x000f,
+	0x007b, 0x0000, 0x0032, 0x0000,
+	0x00c3, 0x00c3, 0x00c0, 0x0000,
 	0x0000, 0x0000, 0x0000, 0x0000,
 	0x0000, 0x0000, 0x0000, 0x0000,
-	0x0000, 0x0000, 0x0000, 0x0055,
-	0x0005, 0x0050, 0x0055, 0x0050,
-	0x0055, 0x0050, 0x0055, 0x0079,
-	0x0079, 0x0079, 0x0079, 0x0079,
 	0x0000, 0x0000, 0x0000, 0x0000,
-	0x0097, 0x0097, 0x0000, 0x0004,
-	0x0000, 0x0083, 0x0024, 0x01ba,
-	0x0000, 0x0083, 0x0024, 0x01ba,
-	0x0000, 0x0000, 0x0000
+	0x0055, 0x0005, 0x0050, 0x0055,
+	0x0050, 0x0055, 0x0050, 0x0055,
+	0x0079, 0x0079, 0x0079, 0x0079,
+	0x0079, 0x0000, 0x0000, 0x0000,
+	0x0000, 0x0097, 0x0097, 0x0000,
+	0x0004, 0x0000, 0x0083, 0x0024,
+	0x01ba, 0x0000, 0x0083, 0x0024,
+	0x01ba, 0x0000, 0x0000, 0x0000
 };
 
 /* codec private data */
@@ -88,57 +88,10 @@ struct wm8753_priv {
 	enum snd_soc_control_type control_type;
 	unsigned int sysclk;
 	unsigned int pcmclk;
-	u16 reg_cache[ARRAY_SIZE(wm8753_reg)];
 	int dai_func;
 };
 
-/*
- * read wm8753 register cache
- */
-static inline unsigned int wm8753_read_reg_cache(struct snd_soc_codec *codec,
-	unsigned int reg)
-{
-	u16 *cache = codec->reg_cache;
-	if (reg < 1 || reg >= (ARRAY_SIZE(wm8753_reg) + 1))
-		return -1;
-	return cache[reg - 1];
-}
-
-/*
- * write wm8753 register cache
- */
-static inline void wm8753_write_reg_cache(struct snd_soc_codec *codec,
-	unsigned int reg, unsigned int value)
-{
-	u16 *cache = codec->reg_cache;
-	if (reg < 1 || reg >= (ARRAY_SIZE(wm8753_reg) + 1))
-		return;
-	cache[reg - 1] = value;
-}
-
-/*
- * write to the WM8753 register space
- */
-static int wm8753_write(struct snd_soc_codec *codec, unsigned int reg,
-	unsigned int value)
-{
-	u8 data[2];
-
-	/* data is
-	 *   D15..D9 WM8753 register offset
-	 *   D8...D0 register data
-	 */
-	data[0] = (reg << 1) | ((value >> 8) & 0x0001);
-	data[1] = value & 0x00ff;
-
-	wm8753_write_reg_cache(codec, reg, value);
-	if (codec->hw_write(codec->control_data, data, 2) == 2)
-		return 0;
-	else
-		return -EIO;
-}
-
-#define wm8753_reset(c) wm8753_write(c, WM8753_RESET, 0)
+#define wm8753_reset(c) snd_soc_write(c, WM8753_RESET, 0)
 
 /*
  * WM8753 Controls
@@ -218,7 +171,7 @@ static int wm8753_get_dai(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec =  snd_kcontrol_chip(kcontrol);
-	int mode = wm8753_read_reg_cache(codec, WM8753_IOCTL);
+	int mode = snd_soc_read(codec, WM8753_IOCTL);
 
 	ucontrol->value.integer.value[0] = (mode & 0xc) >> 2;
 	return 0;
@@ -228,7 +181,7 @@ static int wm8753_set_dai(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec =  snd_kcontrol_chip(kcontrol);
-	int mode = wm8753_read_reg_cache(codec, WM8753_IOCTL);
+	int mode = snd_soc_read(codec, WM8753_IOCTL);
 	struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
 
 	if (((mode & 0xc) >> 2) == ucontrol->value.integer.value[0])
@@ -738,17 +691,17 @@ static int wm8753_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
 	if (pll_id == WM8753_PLL1) {
 		offset = 0;
 		enable = 0x10;
-		reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xffef;
+		reg = snd_soc_read(codec, WM8753_CLOCK) & 0xffef;
 	} else {
 		offset = 4;
 		enable = 0x8;
-		reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfff7;
+		reg = snd_soc_read(codec, WM8753_CLOCK) & 0xfff7;
 	}
 
 	if (!freq_in || !freq_out) {
 		/* disable PLL  */
-		wm8753_write(codec, WM8753_PLL1CTL1 + offset, 0x0026);
-		wm8753_write(codec, WM8753_CLOCK, reg);
+		snd_soc_write(codec, WM8753_PLL1CTL1 + offset, 0x0026);
+		snd_soc_write(codec, WM8753_CLOCK, reg);
 		return 0;
 	} else {
 		u16 value = 0;
@@ -759,20 +712,20 @@ static int wm8753_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
 		/* set up N and K PLL divisor ratios */
 		/* bits 8:5 = PLL_N, bits 3:0 = PLL_K[21:18] */
 		value = (pll_div.n << 5) + ((pll_div.k & 0x3c0000) >> 18);
-		wm8753_write(codec, WM8753_PLL1CTL2 + offset, value);
+		snd_soc_write(codec, WM8753_PLL1CTL2 + offset, value);
 
 		/* bits 8:0 = PLL_K[17:9] */
 		value = (pll_div.k & 0x03fe00) >> 9;
-		wm8753_write(codec, WM8753_PLL1CTL3 + offset, value);
+		snd_soc_write(codec, WM8753_PLL1CTL3 + offset, value);
 
 		/* bits 8:0 = PLL_K[8:0] */
 		value = pll_div.k & 0x0001ff;
-		wm8753_write(codec, WM8753_PLL1CTL4 + offset, value);
+		snd_soc_write(codec, WM8753_PLL1CTL4 + offset, value);
 
 		/* set PLL as input and enable */
-		wm8753_write(codec, WM8753_PLL1CTL1 + offset, 0x0027 |
+		snd_soc_write(codec, WM8753_PLL1CTL1 + offset, 0x0027 |
 			(pll_div.div2 << 3));
-		wm8753_write(codec, WM8753_CLOCK, reg | enable);
+		snd_soc_write(codec, WM8753_CLOCK, reg | enable);
 	}
 	return 0;
 }
@@ -879,7 +832,7 @@ static int wm8753_vdac_adc_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		unsigned int fmt)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
-	u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01ec;
+	u16 voice = snd_soc_read(codec, WM8753_PCM) & 0x01ec;
 
 	/* interface format */
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
@@ -901,7 +854,7 @@ static int wm8753_vdac_adc_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		return -EINVAL;
 	}
 
-	wm8753_write(codec, WM8753_PCM, voice);
+	snd_soc_write(codec, WM8753_PCM, voice);
 	return 0;
 }
 
@@ -922,8 +875,8 @@ static int wm8753_pcm_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 	struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
-	u16 voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x01f3;
-	u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x017f;
+	u16 voice = snd_soc_read(codec, WM8753_PCM) & 0x01f3;
+	u16 srate = snd_soc_read(codec, WM8753_SRATE1) & 0x017f;
 
 	/* bit size */
 	switch (params_format(params)) {
@@ -943,9 +896,9 @@ static int wm8753_pcm_hw_params(struct snd_pcm_substream *substream,
 	/* sample rate */
 	if (params_rate(params) * 384 == wm8753->pcmclk)
 		srate |= 0x80;
-	wm8753_write(codec, WM8753_SRATE1, srate);
+	snd_soc_write(codec, WM8753_SRATE1, srate);
 
-	wm8753_write(codec, WM8753_PCM, voice);
+	snd_soc_write(codec, WM8753_PCM, voice);
 	return 0;
 }
 
@@ -958,8 +911,8 @@ static int wm8753_pcm_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	struct snd_soc_codec *codec = codec_dai->codec;
 	u16 voice, ioctl;
 
-	voice = wm8753_read_reg_cache(codec, WM8753_PCM) & 0x011f;
-	ioctl = wm8753_read_reg_cache(codec, WM8753_IOCTL) & 0x015d;
+	voice = snd_soc_read(codec, WM8753_PCM) & 0x011f;
+	ioctl = snd_soc_read(codec, WM8753_IOCTL) & 0x015d;
 
 	/* set master/slave audio interface */
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -1013,8 +966,8 @@ static int wm8753_pcm_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		return -EINVAL;
 	}
 
-	wm8753_write(codec, WM8753_PCM, voice);
-	wm8753_write(codec, WM8753_IOCTL, ioctl);
+	snd_soc_write(codec, WM8753_PCM, voice);
+	snd_soc_write(codec, WM8753_IOCTL, ioctl);
 	return 0;
 }
 
@@ -1026,16 +979,16 @@ static int wm8753_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
 
 	switch (div_id) {
 	case WM8753_PCMDIV:
-		reg = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0x003f;
-		wm8753_write(codec, WM8753_CLOCK, reg | div);
+		reg = snd_soc_read(codec, WM8753_CLOCK) & 0x003f;
+		snd_soc_write(codec, WM8753_CLOCK, reg | div);
 		break;
 	case WM8753_BCLKDIV:
-		reg = wm8753_read_reg_cache(codec, WM8753_SRATE2) & 0x01c7;
-		wm8753_write(codec, WM8753_SRATE2, reg | div);
+		reg = snd_soc_read(codec, WM8753_SRATE2) & 0x01c7;
+		snd_soc_write(codec, WM8753_SRATE2, reg | div);
 		break;
 	case WM8753_VXCLKDIV:
-		reg = wm8753_read_reg_cache(codec, WM8753_SRATE2) & 0x003f;
-		wm8753_write(codec, WM8753_SRATE2, reg | div);
+		reg = snd_soc_read(codec, WM8753_SRATE2) & 0x003f;
+		snd_soc_write(codec, WM8753_SRATE2, reg | div);
 		break;
 	default:
 		return -EINVAL;
@@ -1050,7 +1003,7 @@ static int wm8753_hdac_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		unsigned int fmt)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
-	u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01e0;
+	u16 hifi = snd_soc_read(codec, WM8753_HIFI) & 0x01e0;
 
 	/* interface format */
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
@@ -1072,7 +1025,7 @@ static int wm8753_hdac_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		return -EINVAL;
 	}
 
-	wm8753_write(codec, WM8753_HIFI, hifi);
+	snd_soc_write(codec, WM8753_HIFI, hifi);
 	return 0;
 }
 
@@ -1085,8 +1038,8 @@ static int wm8753_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	struct snd_soc_codec *codec = codec_dai->codec;
 	u16 ioctl, hifi;
 
-	hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x011f;
-	ioctl = wm8753_read_reg_cache(codec, WM8753_IOCTL) & 0x00ae;
+	hifi = snd_soc_read(codec, WM8753_HIFI) & 0x011f;
+	ioctl = snd_soc_read(codec, WM8753_IOCTL) & 0x00ae;
 
 	/* set master/slave audio interface */
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -1140,8 +1093,8 @@ static int wm8753_i2s_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		return -EINVAL;
 	}
 
-	wm8753_write(codec, WM8753_HIFI, hifi);
-	wm8753_write(codec, WM8753_IOCTL, ioctl);
+	snd_soc_write(codec, WM8753_HIFI, hifi);
+	snd_soc_write(codec, WM8753_IOCTL, ioctl);
 	return 0;
 }
 
@@ -1162,8 +1115,8 @@ static int wm8753_i2s_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 	struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
-	u16 srate = wm8753_read_reg_cache(codec, WM8753_SRATE1) & 0x01c0;
-	u16 hifi = wm8753_read_reg_cache(codec, WM8753_HIFI) & 0x01f3;
+	u16 srate = snd_soc_read(codec, WM8753_SRATE1) & 0x01c0;
+	u16 hifi = snd_soc_read(codec, WM8753_HIFI) & 0x01f3;
 	int coeff;
 
 	/* is digital filter coefficient valid ? */
@@ -1172,7 +1125,7 @@ static int wm8753_i2s_hw_params(struct snd_pcm_substream *substream,
 		printk(KERN_ERR "wm8753 invalid MCLK or rate\n");
 		return coeff;
 	}
-	wm8753_write(codec, WM8753_SRATE1, srate | (coeff_div[coeff].sr << 1) |
+	snd_soc_write(codec, WM8753_SRATE1, srate | (coeff_div[coeff].sr << 1) |
 		coeff_div[coeff].usb);
 
 	/* bit size */
@@ -1190,7 +1143,7 @@ static int wm8753_i2s_hw_params(struct snd_pcm_substream *substream,
 		break;
 	}
 
-	wm8753_write(codec, WM8753_HIFI, hifi);
+	snd_soc_write(codec, WM8753_HIFI, hifi);
 	return 0;
 }
 
@@ -1201,8 +1154,8 @@ static int wm8753_mode1v_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	u16 clock;
 
 	/* set clk source as pcmclk */
-	clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
-	wm8753_write(codec, WM8753_CLOCK, clock);
+	clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb;
+	snd_soc_write(codec, WM8753_CLOCK, clock);
 
 	if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0)
 		return -EINVAL;
@@ -1224,8 +1177,8 @@ static int wm8753_mode2_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	u16 clock;
 
 	/* set clk source as pcmclk */
-	clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
-	wm8753_write(codec, WM8753_CLOCK, clock);
+	clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb;
+	snd_soc_write(codec, WM8753_CLOCK, clock);
 
 	if (wm8753_vdac_adc_set_dai_fmt(codec_dai, fmt) < 0)
 		return -EINVAL;
@@ -1239,8 +1192,8 @@ static int wm8753_mode3_4_set_dai_fmt(struct snd_soc_dai *codec_dai,
 	u16 clock;
 
 	/* set clk source as mclk */
-	clock = wm8753_read_reg_cache(codec, WM8753_CLOCK) & 0xfffb;
-	wm8753_write(codec, WM8753_CLOCK, clock | 0x4);
+	clock = snd_soc_read(codec, WM8753_CLOCK) & 0xfffb;
+	snd_soc_write(codec, WM8753_CLOCK, clock | 0x4);
 
 	if (wm8753_hdac_set_dai_fmt(codec_dai, fmt) < 0)
 		return -EINVAL;
@@ -1252,19 +1205,19 @@ static int wm8753_mode3_4_set_dai_fmt(struct snd_soc_dai *codec_dai,
 static int wm8753_mute(struct snd_soc_dai *dai, int mute)
 {
 	struct snd_soc_codec *codec = dai->codec;
-	u16 mute_reg = wm8753_read_reg_cache(codec, WM8753_DAC) & 0xfff7;
+	u16 mute_reg = snd_soc_read(codec, WM8753_DAC) & 0xfff7;
 	struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
 
 	/* the digital mute covers the HiFi and Voice DAC's on the WM8753.
 	 * make sure we check if they are not both active when we mute */
 	if (mute && wm8753->dai_func == 1) {
 		if (!codec->active)
-			wm8753_write(codec, WM8753_DAC, mute_reg | 0x8);
+			snd_soc_write(codec, WM8753_DAC, mute_reg | 0x8);
 	} else {
 		if (mute)
-			wm8753_write(codec, WM8753_DAC, mute_reg | 0x8);
+			snd_soc_write(codec, WM8753_DAC, mute_reg | 0x8);
 		else
-			wm8753_write(codec, WM8753_DAC, mute_reg);
+			snd_soc_write(codec, WM8753_DAC, mute_reg);
 	}
 
 	return 0;
@@ -1273,23 +1226,23 @@ static int wm8753_mute(struct snd_soc_dai *dai, int mute)
 static int wm8753_set_bias_level(struct snd_soc_codec *codec,
 				 enum snd_soc_bias_level level)
 {
-	u16 pwr_reg = wm8753_read_reg_cache(codec, WM8753_PWR1) & 0xfe3e;
+	u16 pwr_reg = snd_soc_read(codec, WM8753_PWR1) & 0xfe3e;
 
 	switch (level) {
 	case SND_SOC_BIAS_ON:
 		/* set vmid to 50k and unmute dac */
-		wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x00c0);
+		snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x00c0);
 		break;
 	case SND_SOC_BIAS_PREPARE:
 		/* set vmid to 5k for quick power up */
-		wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x01c1);
+		snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x01c1);
 		break;
 	case SND_SOC_BIAS_STANDBY:
 		/* mute dac and set vmid to 500k, enable VREF */
-		wm8753_write(codec, WM8753_PWR1, pwr_reg | 0x0141);
+		snd_soc_write(codec, WM8753_PWR1, pwr_reg | 0x0141);
 		break;
 	case SND_SOC_BIAS_OFF:
-		wm8753_write(codec, WM8753_PWR1, 0x0001);
+		snd_soc_write(codec, WM8753_PWR1, 0x0001);
 		break;
 	}
 	codec->bias_level = level;
@@ -1477,7 +1430,7 @@ static void wm8753_set_dai_mode(struct snd_soc_codec *codec,
 		else
 			dai->driver = &wm8753_all_dai[(wm8753->dai_func << 1) + 1];
 	}
-	wm8753_write(codec, WM8753_IOCTL, wm8753->dai_func);
+	snd_soc_write(codec, WM8753_IOCTL, wm8753->dai_func);
 }
 
 static void wm8753_work(struct work_struct *work)
@@ -1495,22 +1448,19 @@ static int wm8753_suspend(struct snd_soc_codec *codec, pm_message_t state)
 
 static int wm8753_resume(struct snd_soc_codec *codec)
 {
+	u16 *reg_cache = codec->reg_cache;
 	int i;
-	u8 data[2];
-	u16 *cache = codec->reg_cache;
 
 	/* Sync reg_cache with the hardware */
-	for (i = 0; i < ARRAY_SIZE(wm8753_reg); i++) {
-		if (i + 1 == WM8753_RESET)
+	for (i = 1; i < ARRAY_SIZE(wm8753_reg); i++) {
+		if (i == WM8753_RESET)
 			continue;
 
 		/* No point in writing hardware default values back */
-		if (cache[i] == wm8753_reg[i])
+		if (reg_cache[i] == wm8753_reg[i])
 			continue;
 
-		data[0] = ((i + 1) << 1) | ((cache[i] >> 8) & 0x0001);
-		data[1] = cache[i] & 0x00ff;
-		codec->hw_write(codec->control_data, data, 2);
+		snd_soc_write(codec, i, reg_cache[i]);
 	}
 
 	wm8753_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
@@ -1548,7 +1498,7 @@ static int run_delayed_work(struct delayed_work *dwork)
 static int wm8753_probe(struct snd_soc_codec *codec)
 {
 	struct wm8753_priv *wm8753 = snd_soc_codec_get_drvdata(codec);
-	int ret = 0, reg;
+	int ret;
 
 	INIT_DELAYED_WORK(&codec->delayed_work, wm8753_work);
 
@@ -1573,26 +1523,16 @@ static int wm8753_probe(struct snd_soc_codec *codec)
 			      msecs_to_jiffies(caps_charge));
 
 	/* set the update bits */
-	reg = wm8753_read_reg_cache(codec, WM8753_LDAC);
-	wm8753_write(codec, WM8753_LDAC, reg | 0x0100);
-	reg = wm8753_read_reg_cache(codec, WM8753_RDAC);
-	wm8753_write(codec, WM8753_RDAC, reg | 0x0100);
-	reg = wm8753_read_reg_cache(codec, WM8753_LADC);
-	wm8753_write(codec, WM8753_LADC, reg | 0x0100);
-	reg = wm8753_read_reg_cache(codec, WM8753_RADC);
-	wm8753_write(codec, WM8753_RADC, reg | 0x0100);
-	reg = wm8753_read_reg_cache(codec, WM8753_LOUT1V);
-	wm8753_write(codec, WM8753_LOUT1V, reg | 0x0100);
-	reg = wm8753_read_reg_cache(codec, WM8753_ROUT1V);
-	wm8753_write(codec, WM8753_ROUT1V, reg | 0x0100);
-	reg = wm8753_read_reg_cache(codec, WM8753_LOUT2V);
-	wm8753_write(codec, WM8753_LOUT2V, reg | 0x0100);
-	reg = wm8753_read_reg_cache(codec, WM8753_ROUT2V);
-	wm8753_write(codec, WM8753_ROUT2V, reg | 0x0100);
-	reg = wm8753_read_reg_cache(codec, WM8753_LINVOL);
-	wm8753_write(codec, WM8753_LINVOL, reg | 0x0100);
-	reg = wm8753_read_reg_cache(codec, WM8753_RINVOL);
-	wm8753_write(codec, WM8753_RINVOL, reg | 0x0100);
+	snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_LOUT1V, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_ROUT1V, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_LOUT2V, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_ROUT2V, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_LINVOL, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_RINVOL, 0x0100, 0x0100);
 
 	snd_soc_add_controls(codec, wm8753_snd_controls,
 			     ARRAY_SIZE(wm8753_snd_controls));
diff --git a/sound/soc/codecs/wm8776.c b/sound/soc/codecs/wm8776.c
index 04182c464e3..0132a27140a 100644
--- a/sound/soc/codecs/wm8776.c
+++ b/sound/soc/codecs/wm8776.c
@@ -34,7 +34,6 @@
 /* codec private data */
 struct wm8776_priv {
 	enum snd_soc_control_type control_type;
-	u16 reg_cache[WM8776_CACHEREGNUM];
 	int sysclk[2];
 };
 
diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c
index 33be84e506e..1ec12eff062 100644
--- a/sound/soc/codecs/wm8904.c
+++ b/sound/soc/codecs/wm8904.c
@@ -50,8 +50,6 @@ static const char *wm8904_supply_names[WM8904_NUM_SUPPLIES] = {
 /* codec private data */
 struct wm8904_priv {
 
-	u16 reg_cache[WM8904_MAX_REGISTER + 1];
-
 	enum wm8904_type devtype;
 	void *control_data;
 
@@ -818,7 +816,8 @@ static int wm8904_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
 
-	return wm8904->deemph;
+	ucontrol->value.enumerated.item[0] = wm8904->deemph;
+	return 0;
 }
 
 static int wm8904_put_deemph(struct snd_kcontrol *kcontrol,
@@ -2093,7 +2092,7 @@ static int wm8904_digital_mute(struct snd_soc_dai *codec_dai, int mute)
 
 static void wm8904_sync_cache(struct snd_soc_codec *codec)
 {
-	struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
+	u16 *reg_cache = codec->reg_cache;
 	int i;
 
 	if (!codec->cache_sync)
@@ -2104,14 +2103,14 @@ static void wm8904_sync_cache(struct snd_soc_codec *codec)
 	/* Sync back cached values if they're different from the
 	 * hardware default.
 	 */
-	for (i = 1; i < ARRAY_SIZE(wm8904->reg_cache); i++) {
+	for (i = 1; i < codec->driver->reg_cache_size; i++) {
 		if (!wm8904_access[i].writable)
 			continue;
 
-		if (wm8904->reg_cache[i] == wm8904_reg[i])
+		if (reg_cache[i] == wm8904_reg[i])
 			continue;
 
-		snd_soc_write(codec, i, wm8904->reg_cache[i]);
+		snd_soc_write(codec, i, reg_cache[i]);
 	}
 
 	codec->cache_sync = 0;
@@ -2370,6 +2369,7 @@ static int wm8904_probe(struct snd_soc_codec *codec)
 {
 	struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
 	struct wm8904_pdata *pdata = wm8904->pdata;
+	u16 *reg_cache = codec->reg_cache;
 	int ret, i;
 
 	codec->cache_sync = 1;
@@ -2436,19 +2436,19 @@ static int wm8904_probe(struct snd_soc_codec *codec)
 	}
 
 	/* Change some default settings - latch VU and enable ZC */
-	wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
-	wm8904->reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
-	wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
-	wm8904->reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
-	wm8904->reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
+	reg_cache[WM8904_ADC_DIGITAL_VOLUME_LEFT] |= WM8904_ADC_VU;
+	reg_cache[WM8904_ADC_DIGITAL_VOLUME_RIGHT] |= WM8904_ADC_VU;
+	reg_cache[WM8904_DAC_DIGITAL_VOLUME_LEFT] |= WM8904_DAC_VU;
+	reg_cache[WM8904_DAC_DIGITAL_VOLUME_RIGHT] |= WM8904_DAC_VU;
+	reg_cache[WM8904_ANALOGUE_OUT1_LEFT] |= WM8904_HPOUT_VU |
 		WM8904_HPOUTLZC;
-	wm8904->reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
+	reg_cache[WM8904_ANALOGUE_OUT1_RIGHT] |= WM8904_HPOUT_VU |
 		WM8904_HPOUTRZC;
-	wm8904->reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
+	reg_cache[WM8904_ANALOGUE_OUT2_LEFT] |= WM8904_LINEOUT_VU |
 		WM8904_LINEOUTLZC;
-	wm8904->reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
+	reg_cache[WM8904_ANALOGUE_OUT2_RIGHT] |= WM8904_LINEOUT_VU |
 		WM8904_LINEOUTRZC;
-	wm8904->reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
+	reg_cache[WM8904_CLOCK_RATES_0] &= ~WM8904_SR_MODE;
 
 	/* Apply configuration from the platform data. */
 	if (wm8904->pdata) {
@@ -2456,23 +2456,23 @@ static int wm8904_probe(struct snd_soc_codec *codec)
 			if (!pdata->gpio_cfg[i])
 				continue;
 
-			wm8904->reg_cache[WM8904_GPIO_CONTROL_1 + i]
+			reg_cache[WM8904_GPIO_CONTROL_1 + i]
 				= pdata->gpio_cfg[i] & 0xffff;
 		}
 
 		/* Zero is the default value for these anyway */
 		for (i = 0; i < WM8904_MIC_REGS; i++)
-			wm8904->reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
+			reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
 				= pdata->mic_cfg[i];
 	}
 
 	/* Set Class W by default - this will be managed by the Class
 	 * G widget at runtime where bypass paths are available.
 	 */
-	wm8904->reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
+	reg_cache[WM8904_CLASS_W_0] |= WM8904_CP_DYN_PWR;
 
 	/* Use normal bias source */
-	wm8904->reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
+	reg_cache[WM8904_BIAS_CONTROL_0] &= ~WM8904_POBCTRL;
 
 	wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
@@ -2498,6 +2498,8 @@ static int wm8904_remove(struct snd_soc_codec *codec)
 
 	wm8904_set_bias_level(codec, SND_SOC_BIAS_OFF);
 	regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+	kfree(wm8904->retune_mobile_texts);
+	kfree(wm8904->drc_texts);
 
 	return 0;
 }
diff --git a/sound/soc/codecs/wm8940.c b/sound/soc/codecs/wm8940.c
index 2cb16f895c4..23086e2c976 100644
--- a/sound/soc/codecs/wm8940.c
+++ b/sound/soc/codecs/wm8940.c
@@ -768,6 +768,7 @@ static __devinit int wm8940_i2c_probe(struct i2c_client *i2c,
 
 	i2c_set_clientdata(i2c, wm8940);
 	wm8940->control_data = i2c;
+	wm8940->control_type = SND_SOC_I2C;
 
 	ret = snd_soc_register_codec(&i2c->dev,
 			&soc_codec_dev_wm8940, &wm8940_dai, 1);
diff --git a/sound/soc/codecs/wm8955.c b/sound/soc/codecs/wm8955.c
index f89ad6c9a80..2ac35b0be86 100644
--- a/sound/soc/codecs/wm8955.c
+++ b/sound/soc/codecs/wm8955.c
@@ -42,8 +42,6 @@ static const char *wm8955_supply_names[WM8955_NUM_SUPPLIES] = {
 struct wm8955_priv {
 	enum snd_soc_control_type control_type;
 
-	u16 reg_cache[WM8955_MAX_REGISTER + 1];
-
 	unsigned int mclk_rate;
 
 	int deemph;
@@ -380,7 +378,8 @@ static int wm8955_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 
-	return wm8955->deemph;
+	ucontrol->value.enumerated.item[0] = wm8955->deemph;
+	return 0;
 }
 
 static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
@@ -767,6 +766,7 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
 				 enum snd_soc_bias_level level)
 {
 	struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+	u16 *reg_cache = codec->reg_cache;
 	int ret, i;
 
 	switch (level) {
@@ -799,14 +799,14 @@ static int wm8955_set_bias_level(struct snd_soc_codec *codec,
 			/* Sync back cached values if they're
 			 * different from the hardware default.
 			 */
-			for (i = 0; i < ARRAY_SIZE(wm8955->reg_cache); i++) {
+			for (i = 0; i < codec->driver->reg_cache_size; i++) {
 				if (i == WM8955_RESET)
 					continue;
 
-				if (wm8955->reg_cache[i] == wm8955_reg[i])
+				if (reg_cache[i] == wm8955_reg[i])
 					continue;
 
-				snd_soc_write(codec, i, wm8955->reg_cache[i]);
+				snd_soc_write(codec, i, reg_cache[i]);
 			}
 
 			/* Enable VREF and VMID */
@@ -901,6 +901,7 @@ static int wm8955_probe(struct snd_soc_codec *codec)
 {
 	struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
 	struct wm8955_pdata *pdata = dev_get_platdata(codec->dev);
+	u16 *reg_cache = codec->reg_cache;
 	int ret, i;
 
 	ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8955->control_type);
@@ -933,25 +934,25 @@ static int wm8955_probe(struct snd_soc_codec *codec)
 	}
 
 	/* Change some default settings - latch VU and enable ZC */
-	wm8955->reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
-	wm8955->reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
-	wm8955->reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
-	wm8955->reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
-	wm8955->reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
-	wm8955->reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
-	wm8955->reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
+	reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
+	reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
+	reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
+	reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
+	reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
+	reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
+	reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
 
 	/* Also enable adaptive bass boost by default */
-	wm8955->reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
+	reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
 
 	/* Set platform data values */
 	if (pdata) {
 		if (pdata->out2_speaker)
-			wm8955->reg_cache[WM8955_ADDITIONAL_CONTROL_2]
+			reg_cache[WM8955_ADDITIONAL_CONTROL_2]
 				|= WM8955_ROUT2INV;
 
 		if (pdata->monoin_diff)
-			wm8955->reg_cache[WM8955_MONO_OUT_MIX_1]
+			reg_cache[WM8955_MONO_OUT_MIX_1]
 				|= WM8955_DMEN;
 	}
 
@@ -1002,6 +1003,7 @@ static __devinit int wm8955_i2c_probe(struct i2c_client *i2c,
 		return -ENOMEM;
 
 	i2c_set_clientdata(i2c, wm8955);
+	wm8955->control_type = SND_SOC_I2C;
 
 	ret = snd_soc_register_codec(&i2c->dev,
 			&soc_codec_dev_wm8955, &wm8955_dai, 1);
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 8d5efb333c3..ff6ff2f529d 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -138,7 +138,8 @@ static int wm8960_get_deemph(struct snd_kcontrol *kcontrol,
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
 	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
 
-	return wm8960->deemph;
+	ucontrol->value.enumerated.item[0] = wm8960->deemph;
+	return 0;
 }
 
 static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
@@ -1012,6 +1013,7 @@ static __devinit int wm8960_i2c_probe(struct i2c_client *i2c,
 		return -ENOMEM;
 
 	i2c_set_clientdata(i2c, wm8960);
+	wm8960->control_type = SND_SOC_I2C;
 	wm8960->control_data = i2c;
 
 	ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/codecs/wm8961.c b/sound/soc/codecs/wm8961.c
index 4f326f60410..8340485c985 100644
--- a/sound/soc/codecs/wm8961.c
+++ b/sound/soc/codecs/wm8961.c
@@ -711,7 +711,7 @@ static int wm8961_hw_params(struct snd_pcm_substream *substream,
 	if (fs <= 24000)
 		reg |= WM8961_DACSLOPE;
 	else
-		reg &= WM8961_DACSLOPE;
+		reg &= ~WM8961_DACSLOPE;
 	snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
 
 	return 0;
@@ -736,7 +736,7 @@ static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id,
 		freq /= 2;
 	} else {
 		dev_dbg(codec->dev, "Using MCLK/1 for %dHz MCLK\n", freq);
-		reg &= WM8961_MCLKDIV;
+		reg &= ~WM8961_MCLKDIV;
 	}
 
 	snd_soc_write(codec, WM8961_CLOCKING1, reg);
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 894d0cd3aa9..7c421cc837b 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -52,8 +52,6 @@ static const char *wm8962_supply_names[WM8962_NUM_SUPPLIES] = {
 struct wm8962_priv {
 	struct snd_soc_codec *codec;
 
-	u16 reg_cache[WM8962_MAX_REGISTER + 1];
-
 	int sysclk;
 	int sysclk_rate;
 
@@ -1991,8 +1989,7 @@ static int wm8962_put_hp_sw(struct snd_kcontrol *kcontrol,
 			    struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
-	u16 *reg_cache = wm8962->reg_cache;
+	u16 *reg_cache = codec->reg_cache;
 	int ret;
 
 	/* Apply the update (if any) */
@@ -2020,8 +2017,7 @@ static int wm8962_put_spk_sw(struct snd_kcontrol *kcontrol,
 			    struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
-	u16 *reg_cache = wm8962->reg_cache;
+	u16 *reg_cache = codec->reg_cache;
 	int ret;
 
 	/* Apply the update (if any) */
@@ -2329,8 +2325,7 @@ static int out_pga_event(struct snd_soc_dapm_widget *w,
 			 struct snd_kcontrol *kcontrol, int event)
 {
 	struct snd_soc_codec *codec = w->codec;
-	struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
-	u16 *reg_cache = wm8962->reg_cache;
+	u16 *reg_cache = codec->reg_cache;
 	int reg;
 
 	switch (w->shift) {
@@ -2719,7 +2714,7 @@ static int wm8962_add_widgets(struct snd_soc_codec *codec)
 
 static void wm8962_sync_cache(struct snd_soc_codec *codec)
 {
-	struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+	u16 *reg_cache = codec->reg_cache;
 	int i;
 
 	if (!codec->cache_sync)
@@ -2732,13 +2727,13 @@ static void wm8962_sync_cache(struct snd_soc_codec *codec)
 	/* Sync back cached values if they're different from the
 	 * hardware default.
 	 */
-	for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) {
+	for (i = 1; i < codec->driver->reg_cache_size; i++) {
 		if (i == WM8962_SOFTWARE_RESET)
 			continue;
-		if (wm8962->reg_cache[i] == wm8962_reg[i])
+		if (reg_cache[i] == wm8962_reg[i])
 			continue;
 
-		snd_soc_write(codec, i, wm8962->reg_cache[i]);
+		snd_soc_write(codec, i, reg_cache[i]);
 	}
 
 	codec->cache_sync = 0;
@@ -3339,7 +3334,7 @@ static irqreturn_t wm8962_irq(int irq, void *data)
 	int mask;
 	int active;
 
-	mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
+	mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2_MASK);
 
 	active = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
 	active &= ~mask;
@@ -3406,12 +3401,11 @@ EXPORT_SYMBOL_GPL(wm8962_mic_detect);
 #ifdef CONFIG_PM
 static int wm8962_resume(struct snd_soc_codec *codec)
 {
-	struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
 	u16 *reg_cache = codec->reg_cache;
 	int i;
 
 	/* Restore the registers */
-	for (i = 1; i < ARRAY_SIZE(wm8962->reg_cache); i++) {
+	for (i = 1; i < codec->driver->reg_cache_size; i++) {
 		switch (i) {
 		case WM8962_SOFTWARE_RESET:
 			continue;
@@ -3500,8 +3494,11 @@ static ssize_t wm8962_beep_set(struct device *dev,
 {
 	struct wm8962_priv *wm8962 = dev_get_drvdata(dev);
 	long int time;
+	int ret;
 
-	strict_strtol(buf, 10, &time);
+	ret = strict_strtol(buf, 10, &time);
+	if (ret != 0)
+		return ret;
 
 	input_event(wm8962->beep, EV_SND, SND_TONE, time);
 
@@ -3702,6 +3699,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
 	struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
 	struct i2c_client *i2c = container_of(codec->dev, struct i2c_client,
 					      dev);
+	u16 *reg_cache = codec->reg_cache;
 	int i, trigger, irq_pol;
 
 	wm8962->codec = codec;
@@ -3801,7 +3799,7 @@ static int wm8962_probe(struct snd_soc_codec *codec)
 
 		/* Put the speakers into mono mode? */
 		if (pdata->spk_mono)
-			wm8962->reg_cache[WM8962_CLASS_D_CONTROL_2]
+			reg_cache[WM8962_CLASS_D_CONTROL_2]
 				|= WM8962_SPK_MONO;
 
 		/* Micbias setup, detection enable and detection
@@ -3816,16 +3814,16 @@ static int wm8962_probe(struct snd_soc_codec *codec)
 	}
 
 	/* Latch volume update bits */
-	wm8962->reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
-	wm8962->reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
-	wm8962->reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
-	wm8962->reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;	
-	wm8962->reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
-	wm8962->reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
-	wm8962->reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
-	wm8962->reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
-	wm8962->reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
-	wm8962->reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
+	reg_cache[WM8962_LEFT_INPUT_VOLUME] |= WM8962_IN_VU;
+	reg_cache[WM8962_RIGHT_INPUT_VOLUME] |= WM8962_IN_VU;
+	reg_cache[WM8962_LEFT_ADC_VOLUME] |= WM8962_ADC_VU;
+	reg_cache[WM8962_RIGHT_ADC_VOLUME] |= WM8962_ADC_VU;
+	reg_cache[WM8962_LEFT_DAC_VOLUME] |= WM8962_DAC_VU;
+	reg_cache[WM8962_RIGHT_DAC_VOLUME] |= WM8962_DAC_VU;
+	reg_cache[WM8962_SPKOUTL_VOLUME] |= WM8962_SPKOUT_VU;
+	reg_cache[WM8962_SPKOUTR_VOLUME] |= WM8962_SPKOUT_VU;
+	reg_cache[WM8962_HPOUTL_VOLUME] |= WM8962_HPOUT_VU;
+	reg_cache[WM8962_HPOUTR_VOLUME] |= WM8962_HPOUT_VU;
 
 	wm8962_add_widgets(codec);
 
diff --git a/sound/soc/codecs/wm8971.c b/sound/soc/codecs/wm8971.c
index 63f6dbf5d07..9f18db6e167 100644
--- a/sound/soc/codecs/wm8971.c
+++ b/sound/soc/codecs/wm8971.c
@@ -718,6 +718,7 @@ static __devinit int wm8971_i2c_probe(struct i2c_client *i2c,
 	if (wm8971 == NULL)
 		return -ENOMEM;
 
+	wm8971->control_type = SND_SOC_I2C;
 	i2c_set_clientdata(i2c, wm8971);
 
 	ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 0db59c3aa5d..4d3e6f1ac58 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -3903,6 +3903,8 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
 		return -ENOMEM;
 	snd_soc_codec_set_drvdata(codec, wm8994);
 
+	codec->reg_cache = &wm8994->reg_cache;
+
 	wm8994->pdata = dev_get_platdata(codec->dev->parent);
 	wm8994->codec = codec;
 
@@ -4059,6 +4061,8 @@ static int  wm8994_codec_remove(struct snd_soc_codec *codec)
 	wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC2_DET, wm8994);
 	wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_SHRT, wm8994);
 	wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_DET, wm8994);
+	kfree(wm8994->retune_mobile_texts);
+	kfree(wm8994->drc_texts);
 	kfree(wm8994);
 
 	return 0;
@@ -4071,6 +4075,8 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8994 = {
 	.resume =	wm8994_resume,
 	.read = wm8994_read,
 	.write = wm8994_write,
+	.readable_register = wm8994_readable,
+	.volatile_register = wm8994_volatile,
 	.set_bias_level = wm8994_set_bias_level,
 };
 
diff --git a/sound/soc/codecs/wm9081.c b/sound/soc/codecs/wm9081.c
index ecc7c37180c..a486670966b 100644
--- a/sound/soc/codecs/wm9081.c
+++ b/sound/soc/codecs/wm9081.c
@@ -1335,6 +1335,7 @@ static __devinit int wm9081_i2c_probe(struct i2c_client *i2c,
 		return -ENOMEM;
 
 	i2c_set_clientdata(i2c, wm9081);
+	wm9081->control_type = SND_SOC_I2C;
 	wm9081->control_data = i2c;
 
 	ret = snd_soc_register_codec(&i2c->dev,
diff --git a/sound/soc/codecs/wm9090.c b/sound/soc/codecs/wm9090.c
index 99c046ba46b..6e5f64f627c 100644
--- a/sound/soc/codecs/wm9090.c
+++ b/sound/soc/codecs/wm9090.c
@@ -141,7 +141,6 @@ static const u16 wm9090_reg_defaults[] = {
 /* This struct is used to save the context */
 struct wm9090_priv {
 	struct mutex mutex;
-	u16 reg_cache[WM9090_MAX_REGISTER + 1];
 	struct wm9090_platform_data pdata;
 	void *control_data;
 };
@@ -552,6 +551,7 @@ static int wm9090_set_bias_level(struct snd_soc_codec *codec,
 static int wm9090_probe(struct snd_soc_codec *codec)
 {
 	struct wm9090_priv *wm9090 = snd_soc_codec_get_drvdata(codec);
+	u16 *reg_cache = codec->reg_cache;
 	int ret;
 
 	codec->control_data = wm9090->control_data;
@@ -576,22 +576,22 @@ static int wm9090_probe(struct snd_soc_codec *codec)
 	/* Configure some defaults; they will be written out when we
 	 * bring the bias up.
 	 */
-	wm9090->reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU
+	reg_cache[WM9090_IN1_LINE_INPUT_A_VOLUME] |= WM9090_IN1_VU
 		| WM9090_IN1A_ZC;
-	wm9090->reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU
+	reg_cache[WM9090_IN1_LINE_INPUT_B_VOLUME] |= WM9090_IN1_VU
 		| WM9090_IN1B_ZC;
-	wm9090->reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU
+	reg_cache[WM9090_IN2_LINE_INPUT_A_VOLUME] |= WM9090_IN2_VU
 		| WM9090_IN2A_ZC;
-	wm9090->reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU
+	reg_cache[WM9090_IN2_LINE_INPUT_B_VOLUME] |= WM9090_IN2_VU
 		| WM9090_IN2B_ZC;
-	wm9090->reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |=
+	reg_cache[WM9090_SPEAKER_VOLUME_LEFT] |=
 		WM9090_SPKOUT_VU | WM9090_SPKOUTL_ZC;
-	wm9090->reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |=
+	reg_cache[WM9090_LEFT_OUTPUT_VOLUME] |=
 		WM9090_HPOUT1_VU | WM9090_HPOUT1L_ZC;
-	wm9090->reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |=
+	reg_cache[WM9090_RIGHT_OUTPUT_VOLUME] |=
 		WM9090_HPOUT1_VU | WM9090_HPOUT1R_ZC;
 
-	wm9090->reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA;
+	reg_cache[WM9090_CLOCKING_1] |= WM9090_TOCLK_ENA;
 
 	wm9090_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
 
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c
index 19ca782ac97..0e24092722c 100644
--- a/sound/soc/codecs/wm_hubs.c
+++ b/sound/soc/codecs/wm_hubs.c
@@ -293,7 +293,7 @@ SOC_DOUBLE_R("Speaker Switch",
 SOC_DOUBLE_R("Speaker ZC Switch",
 	     WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
 	     7, 1, 0),
-SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 0, 3, 7, 0,
+SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 3, 0, 7, 0,
 	       spkboost_tlv),
 SOC_ENUM("Speaker Reference", speaker_ref),
 SOC_ENUM("Speaker Mode", speaker_mode),
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 2b07b17a6b2..bc9e6b0b3f6 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -157,12 +157,23 @@ static int evm_aic3x_init(struct snd_soc_pcm_runtime *rtd)
 }
 
 /* davinci-evm digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link evm_dai = {
+static struct snd_soc_dai_link dm6446_evm_dai = {
 	.name = "TLV320AIC3X",
 	.stream_name = "AIC3X",
-	.cpu_dai_name = "davinci-mcasp.0",
+	.cpu_dai_name = "davinci-mcbsp",
 	.codec_dai_name = "tlv320aic3x-hifi",
-	.codec_name = "tlv320aic3x-codec.0-001a",
+	.codec_name = "tlv320aic3x-codec.1-001b",
+	.platform_name = "davinci-pcm-audio",
+	.init = evm_aic3x_init,
+	.ops = &evm_ops,
+};
+
+static struct snd_soc_dai_link dm355_evm_dai = {
+	.name = "TLV320AIC3X",
+	.stream_name = "AIC3X",
+	.cpu_dai_name = "davinci-mcbsp.1",
+	.codec_dai_name = "tlv320aic3x-hifi",
+	.codec_name = "tlv320aic3x-codec.1-001b",
 	.platform_name = "davinci-pcm-audio",
 	.init = evm_aic3x_init,
 	.ops = &evm_ops,
@@ -172,10 +183,10 @@ static struct snd_soc_dai_link dm365_evm_dai = {
 #ifdef CONFIG_SND_DM365_AIC3X_CODEC
 	.name = "TLV320AIC3X",
 	.stream_name = "AIC3X",
-	.cpu_dai_name = "davinci-i2s",
+	.cpu_dai_name = "davinci-mcbsp",
 	.codec_dai_name = "tlv320aic3x-hifi",
 	.init = evm_aic3x_init,
-	.codec_name = "tlv320aic3x-codec.0-001a",
+	.codec_name = "tlv320aic3x-codec.1-0018",
 	.ops = &evm_ops,
 #elif defined(CONFIG_SND_DM365_VOICE_CODEC)
 	.name = "Voice Codec - CQ93VC",
@@ -219,10 +230,17 @@ static struct snd_soc_dai_link da8xx_evm_dai = {
 	.ops = &evm_ops,
 };
 
-/* davinci dm6446, dm355 evm audio machine driver */
-static struct snd_soc_card snd_soc_card_evm = {
-	.name = "DaVinci EVM",
-	.dai_link = &evm_dai,
+/* davinci dm6446 evm audio machine driver */
+static struct snd_soc_card dm6446_snd_soc_card_evm = {
+	.name = "DaVinci DM6446 EVM",
+	.dai_link = &dm6446_evm_dai,
+	.num_links = 1,
+};
+
+/* davinci dm355 evm audio machine driver */
+static struct snd_soc_card dm355_snd_soc_card_evm = {
+	.name = "DaVinci DM355 EVM",
+	.dai_link = &dm355_evm_dai,
 	.num_links = 1,
 };
 
@@ -261,10 +279,10 @@ static int __init evm_init(void)
 	int ret;
 
 	if (machine_is_davinci_evm()) {
-		evm_snd_dev_data = &snd_soc_card_evm;
+		evm_snd_dev_data = &dm6446_snd_soc_card_evm;
 		index = 0;
 	} else if (machine_is_davinci_dm355_evm()) {
-		evm_snd_dev_data = &snd_soc_card_evm;
+		evm_snd_dev_data = &dm355_snd_soc_card_evm;
 		index = 1;
 	} else if (machine_is_davinci_dm365_evm()) {
 		evm_snd_dev_data = &dm365_snd_soc_card_evm;
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index d46b545d41f..9e0e565e6ed 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -426,9 +426,6 @@ static int davinci_i2s_hw_params(struct snd_pcm_substream *substream,
 	snd_pcm_format_t fmt;
 	unsigned element_cnt = 1;
 
-	dai->capture_dma_data = dev->dma_params;
-	dai->playback_dma_data = dev->dma_params;
-
 	/* general line settings */
 	spcr = davinci_mcbsp_read_reg(dev, DAVINCI_MCBSP_SPCR_REG);
 	if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
@@ -601,6 +598,15 @@ static int davinci_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
 	return ret;
 }
 
+static int davinci_i2s_startup(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct davinci_mcbsp_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+	return 0;
+}
+
 static void davinci_i2s_shutdown(struct snd_pcm_substream *substream,
 		struct snd_soc_dai *dai)
 {
@@ -612,6 +618,7 @@ static void davinci_i2s_shutdown(struct snd_pcm_substream *substream,
 #define DAVINCI_I2S_RATES	SNDRV_PCM_RATE_8000_96000
 
 static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
+	.startup	= davinci_i2s_startup,
 	.shutdown	= davinci_i2s_shutdown,
 	.prepare	= davinci_i2s_prepare,
 	.trigger	= davinci_i2s_trigger,
@@ -749,7 +756,7 @@ static struct platform_driver davinci_mcbsp_driver = {
 	.probe		= davinci_i2s_probe,
 	.remove		= davinci_i2s_remove,
 	.driver		= {
-		.name	= "davinci-i2s",
+		.name	= "davinci-mcbsp",
 		.owner	= THIS_MODULE,
 	},
 };
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 86918ee1241..fb55d2c5d70 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -715,9 +715,6 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
 	int word_length;
 	u8 fifo_level;
 
-	cpu_dai->capture_dma_data = dev->dma_params;
-	cpu_dai->playback_dma_data = dev->dma_params;
-
 	davinci_hw_common_param(dev, substream->stream);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		fifo_level = dev->txnumevt;
@@ -799,7 +796,17 @@ static int davinci_mcasp_trigger(struct snd_pcm_substream *substream,
 	return ret;
 }
 
+static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
+				 struct snd_soc_dai *dai)
+{
+	struct davinci_audio_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+	return 0;
+}
+
 static struct snd_soc_dai_ops davinci_mcasp_dai_ops = {
+	.startup	= davinci_mcasp_startup,
 	.trigger	= davinci_mcasp_trigger,
 	.hw_params	= davinci_mcasp_hw_params,
 	.set_fmt	= davinci_mcasp_set_dai_fmt,
diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c
index 009b6521a1b..6c6666a1f94 100644
--- a/sound/soc/davinci/davinci-sffsdr.c
+++ b/sound/soc/davinci/davinci-sffsdr.c
@@ -84,7 +84,7 @@ static struct snd_soc_ops sffsdr_ops = {
 static struct snd_soc_dai_link sffsdr_dai = {
 	.name = "PCM3008", /* Codec name */
 	.stream_name = "PCM3008 HiFi",
-	.cpu_dai_name = "davinci-asp.0",
+	.cpu_dai_name = "davinci-mcbsp",
 	.codec_dai_name = "pcm3008-hifi",
 	.codec_name = "pcm3008-codec",
 	.platform_name = "davinci-pcm-audio",
diff --git a/sound/soc/davinci/davinci-vcif.c b/sound/soc/davinci/davinci-vcif.c
index ea232f6a2c2..9d2afccc3a2 100644
--- a/sound/soc/davinci/davinci-vcif.c
+++ b/sound/soc/davinci/davinci-vcif.c
@@ -97,9 +97,6 @@ static int davinci_vcif_hw_params(struct snd_pcm_substream *substream,
 			&davinci_vcif_dev->dma_params[substream->stream];
 	u32 w;
 
-	dai->capture_dma_data = davinci_vcif_dev->dma_params;
-	dai->playback_dma_data = davinci_vcif_dev->dma_params;
-
 	/* Restart the codec before setup */
 	davinci_vcif_stop(substream);
 	davinci_vcif_start(substream);
@@ -174,9 +171,19 @@ static int davinci_vcif_trigger(struct snd_pcm_substream *substream, int cmd,
 	return ret;
 }
 
+static int davinci_vcif_startup(struct snd_pcm_substream *substream,
+				struct snd_soc_dai *dai)
+{
+	struct davinci_vcif_dev *dev = snd_soc_dai_get_drvdata(dai);
+
+	snd_soc_dai_set_dma_data(dai, substream, dev->dma_params);
+	return 0;
+}
+
 #define DAVINCI_VCIF_RATES	SNDRV_PCM_RATE_8000_48000
 
 static struct snd_soc_dai_ops davinci_vcif_dai_ops = {
+	.startup	= davinci_vcif_startup,
 	.trigger	= davinci_vcif_trigger,
 	.hw_params	= davinci_vcif_hw_params,
 };
@@ -240,7 +247,10 @@ fail:
 
 static int davinci_vcif_remove(struct platform_device *pdev)
 {
+	struct davinci_vcif_dev *davinci_vcif_dev = dev_get_drvdata(&pdev->dev);
+
 	snd_soc_unregister_dai(&pdev->dev);
+	kfree(davinci_vcif_dev);
 
 	return 0;
 }
diff --git a/sound/soc/ep93xx/simone.c b/sound/soc/ep93xx/simone.c
index 4b0d1991372..286817946c5 100644
--- a/sound/soc/ep93xx/simone.c
+++ b/sound/soc/ep93xx/simone.c
@@ -54,24 +54,26 @@ static int __init simone_init(void)
 
 	ret = platform_device_add(simone_snd_ac97_device);
 	if (ret)
-		goto fail;
+		goto fail1;
 
 	simone_snd_device = platform_device_alloc("soc-audio", -1);
 	if (!simone_snd_device) {
 		ret = -ENOMEM;
-		goto fail;
+		goto fail2;
 	}
 
 	platform_set_drvdata(simone_snd_device, &snd_soc_simone);
 	ret = platform_device_add(simone_snd_device);
-	if (ret) {
-		platform_device_put(simone_snd_device);
-		goto fail;
-	}
+	if (ret)
+		goto fail3;
 
-	return ret;
+	return 0;
 
-fail:
+fail3:
+	platform_device_put(simone_snd_device);
+fail2:
+	platform_device_del(simone_snd_ac97_device);
+fail1:
 	platform_device_put(simone_snd_ac97_device);
 	return ret;
 }
diff --git a/sound/soc/fsl/efika-audio-fabric.c b/sound/soc/fsl/efika-audio-fabric.c
index 53251e6b5bd..108b5d8bd0e 100644
--- a/sound/soc/fsl/efika-audio-fabric.c
+++ b/sound/soc/fsl/efika-audio-fabric.c
@@ -76,6 +76,7 @@ static __init int efika_fabric_init(void)
 	rc = platform_device_add(pdev);
 	if (rc) {
 		pr_err("efika_fabric_init: platform_device_add() failed\n");
+		platform_device_put(pdev);
 		return -ENODEV;
 	}
 	return 0;
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index dce6b551cd7..f92dca07cd3 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -9,7 +9,6 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
-#include <linux/of_device.h>
 #include <linux/of_platform.h>
 
 #include <sound/soc.h>
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index 74ffed41340..9018fa5bf0d 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -160,7 +160,7 @@ static int __devinit psc_i2s_of_probe(struct platform_device *op,
 	rc = snd_soc_register_dais(&op->dev, psc_i2s_dai, ARRAY_SIZE(psc_i2s_dai));
 	if (rc != 0) {
 		pr_err("Failed to register DAI\n");
-		return 0;
+		return rc;
 	}
 
 	psc_dma = dev_get_drvdata(&op->dev);
diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c
index 0d7dcf1e486..7d7847a1e66 100644
--- a/sound/soc/fsl/mpc8610_hpcd.c
+++ b/sound/soc/fsl/mpc8610_hpcd.c
@@ -498,6 +498,7 @@ static int mpc8610_hpcd_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "platform device add failed\n");
 		goto error;
 	}
+	dev_set_drvdata(&pdev->dev, sound_device);
 
 	of_node_put(codec_np);
 
diff --git a/sound/soc/fsl/p1022_ds.c b/sound/soc/fsl/p1022_ds.c
index 63b9eaa1ebc..026b756961e 100644
--- a/sound/soc/fsl/p1022_ds.c
+++ b/sound/soc/fsl/p1022_ds.c
@@ -498,6 +498,7 @@ static int p1022_ds_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "platform device add failed\n");
 		goto error;
 	}
+	dev_set_drvdata(&pdev->dev, sound_device);
 
 	of_node_put(codec_np);
 
diff --git a/sound/soc/fsl/pcm030-audio-fabric.c b/sound/soc/fsl/pcm030-audio-fabric.c
index 25f27ec1dd6..ba4d85e317e 100644
--- a/sound/soc/fsl/pcm030-audio-fabric.c
+++ b/sound/soc/fsl/pcm030-audio-fabric.c
@@ -76,6 +76,7 @@ static __init int pcm030_fabric_init(void)
 	rc = platform_device_add(pdev);
 	if (rc) {
 		pr_err("pcm030_fabric_init: platform_device_add() failed\n");
+		platform_device_put(pdev);
 		return -ENODEV;
 	}
 	return 0;
diff --git a/sound/soc/imx/eukrea-tlv320.c b/sound/soc/imx/eukrea-tlv320.c
index b59675257ce..dd4fffdbd17 100644
--- a/sound/soc/imx/eukrea-tlv320.c
+++ b/sound/soc/imx/eukrea-tlv320.c
@@ -34,8 +34,8 @@ static int eukrea_tlv320_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
-	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	int ret;
 
 	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
@@ -79,10 +79,10 @@ static struct snd_soc_ops eukrea_tlv320_snd_ops = {
 static struct snd_soc_dai_link eukrea_tlv320_dai = {
 	.name		= "tlv320aic23",
 	.stream_name	= "TLV320AIC23",
-	.codec_dai	= "tlv320aic23-hifi",
+	.codec_dai_name	= "tlv320aic23-hifi",
 	.platform_name	= "imx-pcm-audio.0",
 	.codec_name	= "tlv320aic23-codec.0-001a",
-	.cpu_dai = "imx-ssi.0",
+	.cpu_dai_name	= "imx-ssi.0",
 	.ops		= &eukrea_tlv320_snd_ops,
 };
 
diff --git a/sound/soc/imx/imx-pcm-dma-mx2.c b/sound/soc/imx/imx-pcm-dma-mx2.c
index fd493ee1428..671ef8dd524 100644
--- a/sound/soc/imx/imx-pcm-dma-mx2.c
+++ b/sound/soc/imx/imx-pcm-dma-mx2.c
@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/dmaengine.h>
 
 #include <sound/core.h>
 #include <sound/initval.h>
@@ -27,165 +28,146 @@
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
 
-#include <mach/dma-mx1-mx2.h>
+#include <mach/dma.h>
 
 #include "imx-ssi.h"
 
 struct imx_pcm_runtime_data {
-	int sg_count;
-	struct scatterlist *sg_list;
-	int period;
+	int period_bytes;
 	int periods;
-	unsigned long dma_addr;
 	int dma;
-	struct snd_pcm_substream *substream;
 	unsigned long offset;
 	unsigned long size;
-	unsigned long period_cnt;
 	void *buf;
 	int period_time;
+	struct dma_async_tx_descriptor *desc;
+	struct dma_chan *dma_chan;
+	struct imx_dma_data dma_data;
 };
 
-/* Called by the DMA framework when a period has elapsed */
-static void imx_ssi_dma_progression(int channel, void *data,
-					struct scatterlist *sg)
+static void audio_dma_irq(void *data)
 {
-	struct snd_pcm_substream *substream = data;
+	struct snd_pcm_substream *substream = (struct snd_pcm_substream *)data;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
 
-	if (!sg)
-		return;
-
-	runtime = iprtd->substream->runtime;
+	iprtd->offset += iprtd->period_bytes;
+	iprtd->offset %= iprtd->period_bytes * iprtd->periods;
 
-	iprtd->offset = sg->dma_address - runtime->dma_addr;
-
-	snd_pcm_period_elapsed(iprtd->substream);
+	snd_pcm_period_elapsed(substream);
 }
 
-static void imx_ssi_dma_callback(int channel, void *data)
+static bool filter(struct dma_chan *chan, void *param)
 {
-	pr_err("%s shouldn't be called\n", __func__);
-}
+	struct imx_pcm_runtime_data *iprtd = param;
 
-static void snd_imx_dma_err_callback(int channel, void *data, int err)
-{
-	struct snd_pcm_substream *substream = data;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct imx_pcm_dma_params *dma_params = 
-		snd_soc_dai_get_dma_data(rtd->dai->cpu_dai, substream);
-	struct snd_pcm_runtime *runtime = substream->runtime;
-	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
-	int ret;
+	if (!imx_dma_is_general_purpose(chan))
+		return false;
 
-	pr_err("DMA timeout on channel %d -%s%s%s%s\n",
-		 channel,
-		 err & IMX_DMA_ERR_BURST ?    " burst" : "",
-		 err & IMX_DMA_ERR_REQUEST ?  " request" : "",
-		 err & IMX_DMA_ERR_TRANSFER ? " transfer" : "",
-		 err & IMX_DMA_ERR_BUFFER ?   " buffer" : "");
+        chan->private = &iprtd->dma_data;
 
-	imx_dma_disable(iprtd->dma);
-	ret = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count,
-			IMX_DMA_LENGTH_LOOP, dma_params->dma_addr,
-			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
-			DMA_MODE_WRITE : DMA_MODE_READ);
-	if (!ret)
-		imx_dma_enable(iprtd->dma);
+        return true;
 }
 
-static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream)
+static int imx_ssi_dma_alloc(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct imx_pcm_dma_params *dma_params;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+	struct dma_slave_config slave_config;
+	dma_cap_mask_t mask;
+	enum dma_slave_buswidth buswidth;
 	int ret;
 
 	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
 
-	iprtd->dma = imx_dma_request_by_prio(DRV_NAME, DMA_PRIO_HIGH);
-	if (iprtd->dma < 0) {
-		pr_err("Failed to claim the audio DMA\n");
-		return -ENODEV;
-	}
+	iprtd->dma_data.peripheral_type = IMX_DMATYPE_SSI;
+	iprtd->dma_data.priority = DMA_PRIO_HIGH;
+	iprtd->dma_data.dma_request = dma_params->dma;
 
-	ret = imx_dma_setup_handlers(iprtd->dma,
-				imx_ssi_dma_callback,
-				snd_imx_dma_err_callback, substream);
-	if (ret)
-		goto out;
+	/* Try to grab a DMA channel */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+	iprtd->dma_chan = dma_request_channel(mask, filter, iprtd);
+	if (!iprtd->dma_chan)
+		return -EINVAL;
 
-	ret = imx_dma_setup_progression_handler(iprtd->dma,
-			imx_ssi_dma_progression);
-	if (ret) {
-		pr_err("Failed to setup the DMA handler\n");
-		goto out;
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		buswidth = DMA_SLAVE_BUSWIDTH_2_BYTES;
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+	case SNDRV_PCM_FORMAT_S24_LE:
+		buswidth = DMA_SLAVE_BUSWIDTH_4_BYTES;
+		break;
+	default:
+		return 0;
 	}
 
-	ret = imx_dma_config_channel(iprtd->dma,
-			IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
-			IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
-			dma_params->dma, 1);
-	if (ret < 0) {
-		pr_err("Cannot configure DMA channel: %d\n", ret);
-		goto out;
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		slave_config.direction = DMA_TO_DEVICE;
+		slave_config.dst_addr = dma_params->dma_addr;
+		slave_config.dst_addr_width = buswidth;
+		slave_config.dst_maxburst = dma_params->burstsize;
+	} else {
+		slave_config.direction = DMA_FROM_DEVICE;
+		slave_config.src_addr = dma_params->dma_addr;
+		slave_config.src_addr_width = buswidth;
+		slave_config.src_maxburst = dma_params->burstsize;
 	}
 
-	imx_dma_config_burstlen(iprtd->dma, dma_params->burstsize * 2);
+	ret = dmaengine_slave_config(iprtd->dma_chan, &slave_config);
+	if (ret)
+		return ret;
 
 	return 0;
-out:
-	imx_dma_free(iprtd->dma);
-	return ret;
 }
 
 static int snd_imx_pcm_hw_params(struct snd_pcm_substream *substream,
 				struct snd_pcm_hw_params *params)
 {
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
-	int i;
 	unsigned long dma_addr;
+	struct dma_chan *chan;
+	struct imx_pcm_dma_params *dma_params;
+	int ret;
 
-	imx_ssi_dma_alloc(substream);
+	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+	ret = imx_ssi_dma_alloc(substream, params);
+	if (ret)
+		return ret;
+	chan = iprtd->dma_chan;
 
 	iprtd->size = params_buffer_bytes(params);
 	iprtd->periods = params_periods(params);
-	iprtd->period = params_period_bytes(params);
+	iprtd->period_bytes = params_period_bytes(params);
 	iprtd->offset = 0;
 	iprtd->period_time = HZ / (params_rate(params) /
 			params_period_size(params));
 
 	snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
 
-	if (iprtd->sg_count != iprtd->periods) {
-		kfree(iprtd->sg_list);
-
-		iprtd->sg_list = kcalloc(iprtd->periods + 1,
-				sizeof(struct scatterlist), GFP_KERNEL);
-		if (!iprtd->sg_list)
-			return -ENOMEM;
-		iprtd->sg_count = iprtd->periods + 1;
-	}
-
-	sg_init_table(iprtd->sg_list, iprtd->sg_count);
 	dma_addr = runtime->dma_addr;
 
-	for (i = 0; i < iprtd->periods; i++) {
-		iprtd->sg_list[i].page_link = 0;
-		iprtd->sg_list[i].offset = 0;
-		iprtd->sg_list[i].dma_address = dma_addr;
-		iprtd->sg_list[i].length = iprtd->period;
-		dma_addr += iprtd->period;
+	iprtd->buf = (unsigned int *)substream->dma_buffer.area;
+
+	iprtd->desc = chan->device->device_prep_dma_cyclic(chan, dma_addr,
+			iprtd->period_bytes * iprtd->periods,
+			iprtd->period_bytes,
+			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
+			DMA_TO_DEVICE : DMA_FROM_DEVICE);
+	if (!iprtd->desc) {
+		dev_err(&chan->dev->device, "cannot prepare slave dma\n");
+		return -EINVAL;
 	}
 
-	/* close the loop */
-	iprtd->sg_list[iprtd->sg_count - 1].offset = 0;
-	iprtd->sg_list[iprtd->sg_count - 1].length = 0;
-	iprtd->sg_list[iprtd->sg_count - 1].page_link =
-			((unsigned long) iprtd->sg_list | 0x01) & ~0x02;
+	iprtd->desc->callback = audio_dma_irq;
+	iprtd->desc->callback_param = substream;
+
 	return 0;
 }
 
@@ -194,41 +176,21 @@ static int snd_imx_pcm_hw_free(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
 
-	if (iprtd->dma >= 0) {
-		imx_dma_free(iprtd->dma);
-		iprtd->dma = -EINVAL;
+	if (iprtd->dma_chan) {
+		dma_release_channel(iprtd->dma_chan);
+		iprtd->dma_chan = NULL;
 	}
 
-	kfree(iprtd->sg_list);
-	iprtd->sg_list = NULL;
-
 	return 0;
 }
 
 static int snd_imx_pcm_prepare(struct snd_pcm_substream *substream)
 {
-	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct imx_pcm_dma_params *dma_params;
-	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
-	int err;
 
 	dma_params = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
 
-	iprtd->substream = substream;
-	iprtd->buf = (unsigned int *)substream->dma_buffer.area;
-	iprtd->period_cnt = 0;
-
-	pr_debug("%s: buf: %p period: %d periods: %d\n",
-			__func__, iprtd->buf, iprtd->period, iprtd->periods);
-
-	err = imx_dma_setup_sg(iprtd->dma, iprtd->sg_list, iprtd->sg_count,
-			IMX_DMA_LENGTH_LOOP, dma_params->dma_addr,
-			substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
-			DMA_MODE_WRITE : DMA_MODE_READ);
-	if (err)
-		return err;
-
 	return 0;
 }
 
@@ -241,14 +203,14 @@ static int snd_imx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_START:
 	case SNDRV_PCM_TRIGGER_RESUME:
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-		imx_dma_enable(iprtd->dma);
+		dmaengine_submit(iprtd->desc);
 
 		break;
 
 	case SNDRV_PCM_TRIGGER_STOP:
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-		imx_dma_disable(iprtd->dma);
+		dmaengine_terminate_all(iprtd->dma_chan);
 
 		break;
 	default:
@@ -263,6 +225,9 @@ static snd_pcm_uframes_t snd_imx_pcm_pointer(struct snd_pcm_substream *substream
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
 
+	pr_debug("%s: %ld %ld\n", __func__, iprtd->offset,
+			bytes_to_frames(substream->runtime, iprtd->offset));
+
 	return bytes_to_frames(substream->runtime, iprtd->offset);
 }
 
@@ -279,7 +244,7 @@ static struct snd_pcm_hardware snd_imx_hardware = {
 	.channels_max = 2,
 	.buffer_bytes_max = IMX_SSI_DMABUF_SIZE,
 	.period_bytes_min = 128,
-	.period_bytes_max = 16 * 1024,
+	.period_bytes_max = 65535, /* Limited by SDMA engine */
 	.periods_min = 2,
 	.periods_max = 255,
 	.fifo_size = 0,
@@ -304,11 +269,23 @@ static int snd_imx_open(struct snd_pcm_substream *substream)
 	}
 
 	snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
+
+	return 0;
+}
+
+static int snd_imx_close(struct snd_pcm_substream *substream)
+{
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	struct imx_pcm_runtime_data *iprtd = runtime->private_data;
+
+	kfree(iprtd);
+
 	return 0;
 }
 
 static struct snd_pcm_ops imx_pcm_ops = {
 	.open		= snd_imx_open,
+	.close		= snd_imx_close,
 	.ioctl		= snd_pcm_lib_ioctl,
 	.hw_params	= snd_imx_pcm_hw_params,
 	.hw_free	= snd_imx_pcm_hw_free,
@@ -340,7 +317,6 @@ static struct platform_driver imx_pcm_driver = {
 			.name = "imx-pcm-audio",
 			.owner = THIS_MODULE,
 	},
-
 	.probe = imx_soc_platform_probe,
 	.remove = __devexit_p(imx_soc_platform_remove),
 };
@@ -356,4 +332,3 @@ static void __exit snd_imx_pcm_exit(void)
 	platform_driver_unregister(&imx_pcm_driver);
 }
 module_exit(snd_imx_pcm_exit);
-
diff --git a/sound/soc/imx/imx-ssi.c b/sound/soc/imx/imx-ssi.c
index d4bd345b0a8..390b6ffc265 100644
--- a/sound/soc/imx/imx-ssi.c
+++ b/sound/soc/imx/imx-ssi.c
@@ -439,7 +439,22 @@ void imx_pcm_free(struct snd_pcm *pcm)
 }
 EXPORT_SYMBOL_GPL(imx_pcm_free);
 
+static int imx_ssi_dai_probe(struct snd_soc_dai *dai)
+{
+	struct imx_ssi *ssi = dev_get_drvdata(dai->dev);
+	uint32_t val;
+
+	snd_soc_dai_set_drvdata(dai, ssi);
+
+	val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) |
+		SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize);
+	writel(val, ssi->base + SSI_SFCSR);
+
+	return 0;
+}
+
 static struct snd_soc_dai_driver imx_ssi_dai = {
+	.probe = imx_ssi_dai_probe,
 	.playback = {
 		.channels_min = 2,
 		.channels_max = 2,
@@ -455,20 +470,6 @@ static struct snd_soc_dai_driver imx_ssi_dai = {
 	.ops = &imx_ssi_pcm_dai_ops,
 };
 
-static int imx_ssi_dai_probe(struct snd_soc_dai *dai)
-{
-	struct imx_ssi *ssi = dev_get_drvdata(dai->dev);
-	uint32_t val;
-
-	snd_soc_dai_set_drvdata(dai, ssi);
-
-	val = SSI_SFCSR_TFWM0(ssi->dma_params_tx.burstsize) |
-		SSI_SFCSR_RFWM0(ssi->dma_params_rx.burstsize);
-	writel(val, ssi->base + SSI_SFCSR);
-
-	return 0;
-}
-
 static struct snd_soc_dai_driver imx_ac97_dai = {
 	.probe = imx_ssi_dai_probe,
 	.ac97_control = 1,
@@ -677,9 +678,25 @@ static int imx_ssi_probe(struct platform_device *pdev)
 		goto failed_register;
 	}
 
-	ssi->soc_platform_pdev = platform_device_alloc("imx-fiq-pcm-audio", pdev->id);
-	if (!ssi->soc_platform_pdev)
+	ssi->soc_platform_pdev_fiq = platform_device_alloc("imx-fiq-pcm-audio", pdev->id);
+	if (!ssi->soc_platform_pdev_fiq) {
+		ret = -ENOMEM;
+		goto failed_pdev_fiq_alloc;
+	}
+
+	platform_set_drvdata(ssi->soc_platform_pdev_fiq, ssi);
+	ret = platform_device_add(ssi->soc_platform_pdev_fiq);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform device\n");
+		goto failed_pdev_fiq_add;
+	}
+
+	ssi->soc_platform_pdev = platform_device_alloc("imx-pcm-audio", pdev->id);
+	if (!ssi->soc_platform_pdev) {
+		ret = -ENOMEM;
 		goto failed_pdev_alloc;
+	}
+
 	platform_set_drvdata(ssi->soc_platform_pdev, ssi);
 	ret = platform_device_add(ssi->soc_platform_pdev);
 	if (ret) {
@@ -692,6 +709,10 @@ static int imx_ssi_probe(struct platform_device *pdev)
 failed_pdev_add:
 	platform_device_put(ssi->soc_platform_pdev);
 failed_pdev_alloc:
+	platform_device_del(ssi->soc_platform_pdev_fiq);
+failed_pdev_fiq_add:
+	platform_device_put(ssi->soc_platform_pdev_fiq);
+failed_pdev_fiq_alloc:
 	snd_soc_unregister_dai(&pdev->dev);
 failed_register:
 failed_ac97:
@@ -712,8 +733,8 @@ static int __devexit imx_ssi_remove(struct platform_device *pdev)
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	struct imx_ssi *ssi = platform_get_drvdata(pdev);
 
-	platform_device_del(ssi->soc_platform_pdev);
-	platform_device_put(ssi->soc_platform_pdev);
+	platform_device_unregister(ssi->soc_platform_pdev);
+	platform_device_unregister(ssi->soc_platform_pdev_fiq);
 
 	snd_soc_unregister_dai(&pdev->dev);
 
diff --git a/sound/soc/imx/imx-ssi.h b/sound/soc/imx/imx-ssi.h
index 53b780d9b2b..a4406a13489 100644
--- a/sound/soc/imx/imx-ssi.h
+++ b/sound/soc/imx/imx-ssi.h
@@ -185,6 +185,9 @@
 
 #define DRV_NAME "imx-ssi"
 
+#include <linux/dmaengine.h>
+#include <mach/dma.h>
+
 struct imx_pcm_dma_params {
 	int dma;
 	unsigned long dma_addr;
@@ -212,6 +215,7 @@ struct imx_ssi {
 	int enabled;
 
 	struct platform_device *soc_platform_pdev;
+	struct platform_device *soc_platform_pdev_fiq;
 };
 
 struct snd_soc_platform *imx_ssi_fiq_init(struct platform_device *pdev,
diff --git a/sound/soc/imx/phycore-ac97.c b/sound/soc/imx/phycore-ac97.c
index 6a65dd70551..9eabc28667e 100644
--- a/sound/soc/imx/phycore-ac97.c
+++ b/sound/soc/imx/phycore-ac97.c
@@ -20,9 +20,6 @@
 #include <sound/soc-dapm.h>
 #include <asm/mach-types.h>
 
-#include "../codecs/wm9712.h"
-#include "imx-ssi.h"
-
 static struct snd_soc_card imx_phycore;
 
 static struct snd_soc_ops imx_phycore_hifi_ops = {
@@ -41,11 +38,12 @@ static struct snd_soc_dai_link imx_phycore_dai_ac97[] = {
 };
 
 static struct snd_soc_card imx_phycore = {
-	.name		= "PhyCORE-audio",
+	.name		= "PhyCORE-ac97-audio",
 	.dai_link	= imx_phycore_dai_ac97,
 	.num_links	= ARRAY_SIZE(imx_phycore_dai_ac97),
 };
 
+static struct platform_device *imx_phycore_snd_ac97_device;
 static struct platform_device *imx_phycore_snd_device;
 
 static int __init imx_phycore_init(void)
@@ -56,29 +54,42 @@ static int __init imx_phycore_init(void)
 		/* return happy. We might run on a totally different machine */
 		return 0;
 
-	imx_phycore_snd_device = platform_device_alloc("soc-audio", -1);
-	if (!imx_phycore_snd_device)
+	imx_phycore_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+	if (!imx_phycore_snd_ac97_device)
 		return -ENOMEM;
 
-	platform_set_drvdata(imx_phycore_snd_device, &imx_phycore);
-	ret = platform_device_add(imx_phycore_snd_device);
+	platform_set_drvdata(imx_phycore_snd_ac97_device, &imx_phycore);
+	ret = platform_device_add(imx_phycore_snd_ac97_device);
+	if (ret)
+		goto fail1;
 
 	imx_phycore_snd_device = platform_device_alloc("wm9712-codec", -1);
-	if (!imx_phycore_snd_device)
-		return -ENOMEM;
+	if (!imx_phycore_snd_device) {
+		ret = -ENOMEM;
+		goto fail2;
+	}
 	ret = platform_device_add(imx_phycore_snd_device);
 
 	if (ret) {
 		printk(KERN_ERR "ASoC: Platform device allocation failed\n");
-		platform_device_put(imx_phycore_snd_device);
+		goto fail3;
 	}
 
+	return 0;
+
+fail3:
+	platform_device_put(imx_phycore_snd_device);
+fail2:
+	platform_device_del(imx_phycore_snd_ac97_device);
+fail1:
+	platform_device_put(imx_phycore_snd_ac97_device);
 	return ret;
 }
 
 static void __exit imx_phycore_exit(void)
 {
 	platform_device_unregister(imx_phycore_snd_device);
+	platform_device_unregister(imx_phycore_snd_ac97_device);
 }
 
 late_initcall(imx_phycore_init);
diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c
index 293dc748797..dac6732da96 100644
--- a/sound/soc/nuc900/nuc900-ac97.c
+++ b/sound/soc/nuc900/nuc900-ac97.c
@@ -49,7 +49,7 @@ static unsigned short nuc900_ac97_read(struct snd_ac97 *ac97,
 	mutex_lock(&ac97_mutex);
 
 	val = nuc900_checkready();
-	if (!!val) {
+	if (val) {
 		dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
 		goto out;
 	}
@@ -102,7 +102,7 @@ static void nuc900_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
 	mutex_lock(&ac97_mutex);
 
 	tmp = nuc900_checkready();
-	if (!!tmp)
+	if (tmp)
 		dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
 
 	/* clear the R_WB bit and write register index */
@@ -149,7 +149,7 @@ static void nuc900_ac97_warm_reset(struct snd_ac97 *ac97)
 	udelay(100);
 
 	val = nuc900_checkready();
-	if (!!val)
+	if (val)
 		dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
 
 	mutex_unlock(&ac97_mutex);
@@ -263,8 +263,7 @@ static int nuc900_ac97_trigger(struct snd_pcm_substream *substream,
 	return ret;
 }
 
-static int nuc900_ac97_probe(struct platform_device *pdev,
-					struct snd_soc_dai *dai)
+static int nuc900_ac97_probe(struct snd_soc_dai *dai)
 {
 	struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
 	unsigned long val;
@@ -284,12 +283,12 @@ static int nuc900_ac97_probe(struct platform_device *pdev,
 	return 0;
 }
 
-static void nuc900_ac97_remove(struct platform_device *pdev,
-						struct snd_soc_dai *dai)
+static int nuc900_ac97_remove(struct snd_soc_dai *dai)
 {
 	struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
 
 	clk_disable(nuc900_audio->clk);
+	return 0;
 }
 
 static struct snd_soc_dai_ops nuc900_ac97_dai_ops = {
@@ -313,7 +312,7 @@ static struct snd_soc_dai_driver nuc900_ac97_dai = {
 		.channels_max	= 2,
 	},
 	.ops = &nuc900_ac97_dai_ops,
-}
+};
 
 static int __devinit nuc900_ac97_drvprobe(struct platform_device *pdev)
 {
@@ -384,7 +383,6 @@ out0:
 
 static int __devexit nuc900_ac97_drvremove(struct platform_device *pdev)
 {
-
 	snd_soc_unregister_dai(&pdev->dev);
 
 	clk_put(nuc900_ac97_data->clk);
@@ -392,6 +390,7 @@ static int __devexit nuc900_ac97_drvremove(struct platform_device *pdev)
 	release_mem_region(nuc900_ac97_data->res->start,
 				resource_size(nuc900_ac97_data->res));
 
+	kfree(nuc900_ac97_data);
 	nuc900_ac97_data = NULL;
 
 	return 0;
diff --git a/sound/soc/nuc900/nuc900-audio.h b/sound/soc/nuc900/nuc900-audio.h
index aeed8ead2b2..59f7e8ed1a6 100644
--- a/sound/soc/nuc900/nuc900-audio.h
+++ b/sound/soc/nuc900/nuc900-audio.h
@@ -110,4 +110,6 @@ struct nuc900_audio {
 
 };
 
+extern struct nuc900_audio *nuc900_ac97_data;
+
 #endif /*end _NUC900_AUDIO_H */
diff --git a/sound/soc/nuc900/nuc900-pcm.c b/sound/soc/nuc900/nuc900-pcm.c
index 195d1ac9477..8263f56dc66 100644
--- a/sound/soc/nuc900/nuc900-pcm.c
+++ b/sound/soc/nuc900/nuc900-pcm.c
@@ -50,12 +50,12 @@ static int nuc900_dma_hw_params(struct snd_pcm_substream *substream,
 	unsigned long flags;
 	int ret = 0;
 
-	spin_lock_irqsave(&nuc900_audio->lock, flags);
-
 	ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
 	if (ret < 0)
 		return ret;
 
+	spin_lock_irqsave(&nuc900_audio->lock, flags);
+
 	nuc900_audio->substream = substream;
 	nuc900_audio->dma_addr[substream->stream] = runtime->dma_addr;
 	nuc900_audio->buffersize[substream->stream] =
@@ -169,6 +169,7 @@ static int nuc900_dma_prepare(struct snd_pcm_substream *substream)
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct nuc900_audio *nuc900_audio = runtime->private_data;
 	unsigned long flags, val;
+	int ret = 0;
 
 	spin_lock_irqsave(&nuc900_audio->lock, flags);
 
@@ -197,10 +198,10 @@ static int nuc900_dma_prepare(struct snd_pcm_substream *substream)
 		AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
 		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
 	}
 	spin_unlock_irqrestore(&nuc900_audio->lock, flags);
-	return 0;
+	return ret;
 }
 
 static int nuc900_dma_trigger(struct snd_pcm_substream *substream, int cmd)
@@ -332,7 +333,7 @@ static struct snd_soc_platform_driver nuc900_soc_platform = {
 	.ops		= &nuc900_dma_ops,
 	.pcm_new	= nuc900_dma_new,
 	.pcm_free	= nuc900_dma_free_dma_buffers,
-}
+};
 
 static int __devinit nuc900_soc_platform_probe(struct platform_device *pdev)
 {
diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig
index d542ea2ff6b..a088db6d509 100644
--- a/sound/soc/omap/Kconfig
+++ b/sound/soc/omap/Kconfig
@@ -12,8 +12,8 @@ config SND_OMAP_SOC_MCPDM
 config SND_OMAP_SOC_N810
 	tristate "SoC Audio support for Nokia N810"
 	depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
+	depends on OMAP_MUX
 	select SND_OMAP_SOC_MCBSP
-	select OMAP_MUX
 	select SND_SOC_TLV320AIC3X
 	help
 	  Say Y if you want to add support for SoC audio on Nokia N810.
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index d211c9fa5a9..7e84f24b9a8 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -644,15 +644,23 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 
 
 	case OMAP_MCBSP_CLKR_SRC_CLKR:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKR);
 		break;
 	case OMAP_MCBSP_CLKR_SRC_CLKX:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKX);
 		break;
 	case OMAP_MCBSP_FSR_SRC_FSR:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSR);
 		break;
 	case OMAP_MCBSP_FSR_SRC_FSX:
+		if (cpu_class_is_omap1())
+			break;
 		omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSX);
 		break;
 	default:
diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c
index dbd9d96b5f9..4ee33ce2cb9 100644
--- a/sound/soc/omap/omap3pandora.c
+++ b/sound/soc/omap/omap3pandora.c
@@ -306,6 +306,7 @@ static int __init omap3pandora_soc_init(void)
 		pr_err(PREFIX "Failed to get DAC regulator from %s: %ld\n",
 			dev_name(&omap3pandora_snd_device->dev),
 			PTR_ERR(omap3pandora_dac_reg));
+		ret = PTR_ERR(omap3pandora_dac_reg);
 		goto fail3;
 	}
 
diff --git a/sound/soc/omap/osk5912.c b/sound/soc/omap/osk5912.c
index f0e66255642..65ae00e976e 100644
--- a/sound/soc/omap/osk5912.c
+++ b/sound/soc/omap/osk5912.c
@@ -177,7 +177,8 @@ static int __init osk_soc_init(void)
 	tlv320aic23_mclk = clk_get(dev, "mclk");
 	if (IS_ERR(tlv320aic23_mclk)) {
 		printk(KERN_ERR "Could not get mclk clock\n");
-		return -ENODEV;
+		err = PTR_ERR(tlv320aic23_mclk);
+		goto err2;
 	}
 
 	/*
@@ -188,7 +189,7 @@ static int __init osk_soc_init(void)
 		if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) {
 			printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n");
 			err = -ECANCELED;
-			goto err1;
+			goto err3;
 		}
 	}
 
@@ -196,9 +197,12 @@ static int __init osk_soc_init(void)
 	       (uint) clk_get_rate(tlv320aic23_mclk), CODEC_CLOCK);
 
 	return 0;
-err1:
+
+err3:
 	clk_put(tlv320aic23_mclk);
+err2:
 	platform_device_del(osk_snd_device);
+err1:
 	platform_device_put(osk_snd_device);
 
 	return err;
@@ -207,6 +211,7 @@ err1:
 
 static void __exit osk_soc_exit(void)
 {
+	clk_put(tlv320aic23_mclk);
 	platform_device_unregister(osk_snd_device);
 }
 
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 37f191bbfdd..580f4857130 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -1,6 +1,7 @@
 config SND_PXA2XX_SOC
 	tristate "SoC Audio for the Intel PXA2xx chip"
 	depends on ARCH_PXA
+	select SND_ARM
 	select SND_PXA2XX_LIB
 	help
 	  Say Y or M if you want to add support for codecs attached to
diff --git a/sound/soc/pxa/corgi.c b/sound/soc/pxa/corgi.c
index 97e9423615c..f451acd4935 100644
--- a/sound/soc/pxa/corgi.c
+++ b/sound/soc/pxa/corgi.c
@@ -100,8 +100,13 @@ static int corgi_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	corgi_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/magician.c b/sound/soc/pxa/magician.c
index b8207ced407..5ef0526924b 100644
--- a/sound/soc/pxa/magician.c
+++ b/sound/soc/pxa/magician.c
@@ -72,9 +72,13 @@ static int magician_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	magician_ext_control(codec);
 
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/poodle.c b/sound/soc/pxa/poodle.c
index af84ee9c5e1..84edd0385a2 100644
--- a/sound/soc/pxa/poodle.c
+++ b/sound/soc/pxa/poodle.c
@@ -77,8 +77,13 @@ static int poodle_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	poodle_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c
index b439eee462c..8ad93ee2e92 100644
--- a/sound/soc/pxa/pxa-ssp.c
+++ b/sound/soc/pxa/pxa-ssp.c
@@ -20,6 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/pxa2xx_ssp.h>
 
 #include <asm/irq.h>
 
@@ -33,7 +34,6 @@
 #include <mach/hardware.h>
 #include <mach/dma.h>
 #include <mach/audio.h>
-#include <plat/ssp.h>
 
 #include "../../arm/pxa2xx-pcm.h"
 #include "pxa-ssp.h"
diff --git a/sound/soc/pxa/spitz.c b/sound/soc/pxa/spitz.c
index f470f360f4d..0b30d7de24e 100644
--- a/sound/soc/pxa/spitz.c
+++ b/sound/soc/pxa/spitz.c
@@ -108,8 +108,13 @@ static int spitz_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	spitz_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c
index 73d0edd8ded..7b983f93545 100644
--- a/sound/soc/pxa/tosa.c
+++ b/sound/soc/pxa/tosa.c
@@ -81,8 +81,13 @@ static int tosa_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_codec *codec = rtd->codec;
 
+	mutex_lock(&codec->mutex);
+
 	/* check the jack status at stream startup */
 	tosa_ext_control(codec);
+
+	mutex_unlock(&codec->mutex);
+
 	return 0;
 }
 
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 8a6b53ccd20..d85bf8a0abb 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -2,6 +2,7 @@ config SND_S3C24XX_SOC
 	tristate "SoC Audio for the Samsung S3CXXXX chips"
 	depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
 	select S3C64XX_DMA if ARCH_S3C64XX
+	select S3C2410_DMA if ARCH_S3C2410
 	help
 	  Say Y or M if you want to add support for codecs attached to
 	  the S3C24XX AC97 or I2S interfaces. You will also need to
diff --git a/sound/soc/s3c24xx/rx1950_uda1380.c b/sound/soc/s3c24xx/rx1950_uda1380.c
index ffd5cf2fb0a..468cc11fdf4 100644
--- a/sound/soc/s3c24xx/rx1950_uda1380.c
+++ b/sound/soc/s3c24xx/rx1950_uda1380.c
@@ -50,7 +50,6 @@ static unsigned int rates[] = {
 	16000,
 	44100,
 	48000,
-	88200,
 };
 
 static struct snd_pcm_hw_constraint_list hw_rates = {
@@ -130,7 +129,6 @@ static const struct snd_soc_dapm_route audio_map[] = {
 };
 
 static struct platform_device *s3c24xx_snd_device;
-static struct clk *xtal;
 
 static int rx1950_startup(struct snd_pcm_substream *substream)
 {
@@ -179,10 +177,8 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream,
 	case 44100:
 	case 88200:
 		clk_source = S3C24XX_CLKSRC_MPLL;
-		fs_mode = S3C2410_IISMOD_256FS;
-		div = clk_get_rate(xtal) / (256 * rate);
-		if (clk_get_rate(xtal) % (256 * rate) > (128 * rate))
-			div++;
+		fs_mode = S3C2410_IISMOD_384FS;
+		div = 1;
 		break;
 	default:
 		printk(KERN_ERR "%s: rate %d is not supported\n",
@@ -210,7 +206,7 @@ static int rx1950_hw_params(struct snd_pcm_substream *substream,
 
 	/* set MCLK division for sample rate */
 	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
-		S3C2410_IISMOD_384FS);
+		fs_mode);
 	if (ret < 0)
 		return ret;
 
@@ -295,17 +291,8 @@ static int __init rx1950_init(void)
 		goto err_plat_add;
 	}
 
-	xtal = clk_get(&s3c24xx_snd_device->dev, "xtal");
-
-	if (IS_ERR(xtal)) {
-		ret = PTR_ERR(xtal);
-		platform_device_unregister(s3c24xx_snd_device);
-		goto err_clk;
-	}
-
 	return 0;
 
-err_clk:
 err_plat_add:
 err_plat_alloc:
 err_gpio_conf:
@@ -320,7 +307,6 @@ static void __exit rx1950_exit(void)
 	platform_device_unregister(s3c24xx_snd_device);
 	snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
 		hp_jack_gpios);
-	clk_put(xtal);
 	gpio_free(S3C2410_GPA(1));
 }
 
diff --git a/sound/soc/s3c24xx/smdk_spdif.c b/sound/soc/s3c24xx/smdk_spdif.c
index f31d22ad7c8..c8bd90488a8 100644
--- a/sound/soc/s3c24xx/smdk_spdif.c
+++ b/sound/soc/s3c24xx/smdk_spdif.c
@@ -38,7 +38,7 @@ static int set_audio_clock_heirachy(struct platform_device *pdev)
 	}
 
 	mout_epll = clk_get(NULL, "mout_epll");
-	if (IS_ERR(fout_epll)) {
+	if (IS_ERR(mout_epll)) {
 		printk(KERN_WARNING "%s: Cannot find mout_epll.\n",
 				__func__);
 		ret = -EINVAL;
@@ -54,7 +54,7 @@ static int set_audio_clock_heirachy(struct platform_device *pdev)
 	}
 
 	sclk_spdif = clk_get(NULL, "sclk_spdif");
-	if (IS_ERR(fout_epll)) {
+	if (IS_ERR(sclk_spdif)) {
 		printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n",
 				__func__);
 		ret = -EINVAL;
diff --git a/sound/soc/s6000/s6000-i2s.c b/sound/soc/s6000/s6000-i2s.c
index 8778faa174a..3052f64b240 100644
--- a/sound/soc/s6000/s6000-i2s.c
+++ b/sound/soc/s6000/s6000-i2s.c
@@ -434,7 +434,7 @@ static struct snd_soc_dai_driver s6000_i2s_dai = {
 		.rate_max = 1562500,
 	},
 	.ops = &s6000_i2s_dai_ops,
-}
+};
 
 static int __devinit s6000_i2s_probe(struct platform_device *pdev)
 {
diff --git a/sound/soc/s6000/s6000-pcm.c b/sound/soc/s6000/s6000-pcm.c
index 271fd222bf1..ab3ccaec72d 100644
--- a/sound/soc/s6000/s6000-pcm.c
+++ b/sound/soc/s6000/s6000-pcm.c
@@ -473,7 +473,7 @@ static int s6000_pcm_new(struct snd_card *card,
 	}
 
 	res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED,
-			  s6000_soc_platform.name, pcm);
+			  "s6000-audio", pcm);
 	if (res) {
 		printk(KERN_ERR "s6000-pcm couldn't get IRQ\n");
 		return res;
diff --git a/sound/soc/s6000/s6105-ipcam.c b/sound/soc/s6000/s6105-ipcam.c
index 96c05e13753..c1244c5bc73 100644
--- a/sound/soc/s6000/s6105-ipcam.c
+++ b/sound/soc/s6000/s6105-ipcam.c
@@ -167,7 +167,7 @@ static int s6105_aic3x_init(struct snd_soc_pcm_runtime *rtd)
 
 	snd_soc_dapm_sync(codec);
 
-	snd_ctl_add(codec->snd_card, snd_ctl_new1(&audio_out_mux, codec));
+	snd_ctl_add(codec->card->snd_card, snd_ctl_new1(&audio_out_mux, codec));
 
 	return 0;
 }
diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c
index 507e709f280..4c2404b1b86 100644
--- a/sound/soc/sh/fsi.c
+++ b/sound/soc/sh/fsi.c
@@ -132,6 +132,8 @@ struct fsi_priv {
 	struct fsi_stream playback;
 	struct fsi_stream capture;
 
+	long rate;
+
 	u32 mst_ctrl;
 };
 
@@ -854,10 +856,17 @@ static void fsi_dai_shutdown(struct snd_pcm_substream *substream,
 {
 	struct fsi_priv *fsi = fsi_get_priv(substream);
 	int is_play = fsi_is_play(substream);
+	struct fsi_master *master = fsi_get_master(fsi);
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 
 	fsi_irq_disable(fsi, is_play);
 	fsi_clk_ctrl(fsi, 0);
 
+	set_rate = master->info->set_rate;
+	if (set_rate && fsi->rate)
+		set_rate(dai->dev, fsi_is_port_a(fsi), fsi->rate, 0);
+	fsi->rate = 0;
+
 	pm_runtime_put_sync(dai->dev);
 }
 
@@ -891,20 +900,20 @@ static int fsi_dai_hw_params(struct snd_pcm_substream *substream,
 {
 	struct fsi_priv *fsi = fsi_get_priv(substream);
 	struct fsi_master *master = fsi_get_master(fsi);
-	int (*set_rate)(int is_porta, int rate) = master->info->set_rate;
+	int (*set_rate)(struct device *dev, int is_porta, int rate, int enable);
 	int fsi_ver = master->core->ver;
-	int is_play = fsi_is_play(substream);
+	long rate = params_rate(params);
 	int ret;
 
-	/* if slave mode, set_rate is not needed */
-	if (!fsi_is_master_mode(fsi, is_play))
+	set_rate = master->info->set_rate;
+	if (!set_rate)
 		return 0;
 
-	/* it is error if no set_rate */
-	if (!set_rate)
-		return -EIO;
+	ret = set_rate(dai->dev, fsi_is_port_a(fsi), rate, 1);
+	if (ret < 0) /* error */
+		return ret;
 
-	ret = set_rate(fsi_is_port_a(fsi), params_rate(params));
+	fsi->rate = rate;
 	if (ret > 0) {
 		u32 data = 0;
 
diff --git a/sound/soc/sh/ssi.c b/sound/soc/sh/ssi.c
index 40bbdf1591d..05192d97b37 100644
--- a/sound/soc/sh/ssi.c
+++ b/sound/soc/sh/ssi.c
@@ -387,7 +387,7 @@ static int __devinit sh4_soc_dai_probe(struct platform_device *pdev)
 
 static int __devexit sh4_soc_dai_remove(struct platform_device *pdev)
 {
-	snd_soc_unregister_dai(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai));
+	snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai));
 	return 0;
 }
 
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 614a8b30d87..85b7d548f16 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1619,12 +1619,14 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card)
 #ifdef CONFIG_SND_SOC_AC97_BUS
 	/* register any AC97 codecs */
 	for (i = 0; i < card->num_rtd; i++) {
-			ret = soc_register_ac97_dai_link(&card->rtd[i]);
-			if (ret < 0) {
-				printk(KERN_ERR "asoc: failed to register AC97 %s\n", card->name);
-				goto probe_dai_err;
-			}
+		ret = soc_register_ac97_dai_link(&card->rtd[i]);
+		if (ret < 0) {
+			printk(KERN_ERR "asoc: failed to register AC97 %s\n", card->name);
+			while (--i >= 0)
+				soc_unregister_ac97_dai_link(&card->rtd[i]);
+			goto probe_dai_err;
 		}
+	}
 #endif
 
 	card->instantiated = 1;
@@ -3043,8 +3045,10 @@ int snd_soc_register_dais(struct device *dev,
 	for (i = 0; i < count; i++) {
 
 		dai = kzalloc(sizeof(struct snd_soc_dai), GFP_KERNEL);
-		if (dai == NULL)
-			return -ENOMEM;
+		if (dai == NULL) {
+			ret = -ENOMEM;
+			goto err;
+		}
 
 		/* create DAI component name */
 		dai->name = fmt_multiple_name(dev, &dai_drv[i]);
@@ -3070,7 +3074,9 @@ int snd_soc_register_dais(struct device *dev,
 		pr_debug("Registered DAI '%s'\n", dai->name);
 	}
 
+	mutex_lock(&client_mutex);
 	snd_soc_instantiate_cards();
+	mutex_unlock(&client_mutex);
 	return 0;
 
 err:
@@ -3263,9 +3269,6 @@ int snd_soc_register_codec(struct device *dev,
 	return 0;
 
 error:
-	for (i--; i >= 0; i--)
-		snd_soc_unregister_dai(dev);
-
 	if (codec->reg_cache)
 		kfree(codec->reg_cache);
 	kfree(codec->name);
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 7d85c6496af..c721502833b 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -683,12 +683,12 @@ static int dapm_seq_compare(struct snd_soc_dapm_widget *a,
 			    struct snd_soc_dapm_widget *b,
 			    int sort[])
 {
-	if (a->codec != b->codec)
-		return (unsigned long)a - (unsigned long)b;
 	if (sort[a->id] != sort[b->id])
 		return sort[a->id] - sort[b->id];
 	if (a->reg != b->reg)
 		return a->reg - b->reg;
+	if (a->codec != b->codec)
+		return (unsigned long)a->codec - (unsigned long)b->codec;
 
 	return 0;
 }
@@ -944,6 +944,9 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event)
 		case SND_SOC_DAPM_STREAM_RESUME:
 			sys_power = 1;
 			break;
+		case SND_SOC_DAPM_STREAM_STOP:
+			sys_power = !!codec->active;
+			break;
 		case SND_SOC_DAPM_STREAM_SUSPEND:
 			sys_power = 0;
 			break;
diff --git a/sound/sound_core.c b/sound/sound_core.c
index c03bbaefdbc..5580aced873 100644
--- a/sound/sound_core.c
+++ b/sound/sound_core.c
@@ -104,7 +104,6 @@ module_exit(cleanup_soundcore);
 
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sound.h>
diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c
index 1bc56b2b94e..337a00241a1 100644
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -155,7 +155,7 @@ static int snd_at73c213_set_bitrate(struct snd_at73c213 *chip)
 	if (max_tries < 1)
 		max_tries = 1;
 
-	/* ssc_div must be a power of 2. */
+	/* ssc_div must be even. */
 	ssc_div = (ssc_div + 1) & ~1UL;
 
 	if ((ssc_rate / (ssc_div * 2 * 16)) < BITRATE_MIN) {
diff --git a/tools/perf/Documentation/perf-annotate.txt b/tools/perf/Documentation/perf-annotate.txt
index b2c63309a65..6f5a498608b 100644
--- a/tools/perf/Documentation/perf-annotate.txt
+++ b/tools/perf/Documentation/perf-annotate.txt
@@ -24,12 +24,47 @@ OPTIONS
 --input=::
         Input file name. (default: perf.data)
 
+-d::
+--dsos=<dso[,dso...]>::
+        Only consider symbols in these dsos.
+-s::
+--symbol=<symbol>::
+        Symbol to annotate.
+
+-f::
+--force::
+        Don't complain, do it.
+
+-v::
+--verbose::
+        Be more verbose. (Show symbol address, etc)
+
+-D::
+--dump-raw-trace::
+        Dump raw trace in ASCII.
+
+-k::
+--vmlinux=<file>::
+        vmlinux pathname.
+
+-m::
+--modules::
+        Load module symbols. WARNING: use only with -k and LIVE kernel.
+
+-l::
+--print-line::
+        Print matching source lines (may be slow).
+
+-P::
+--full-paths::
+        Don't shorten the displayed pathnames.
+
 --stdio:: Use the stdio interface.
 
 --tui:: Use the TUI interface Use of --tui requires a tty, if one is not
 	present, as when piping to other commands, the stdio interface is
 	used. This interfaces starts by centering on the line with more
-	samples, TAB/UNTAB cycles thru the lines with more samples.
+	samples, TAB/UNTAB cycles through the lines with more samples.
 
 SEE ALSO
 --------
diff --git a/tools/perf/Documentation/perf-buildid-list.txt b/tools/perf/Documentation/perf-buildid-list.txt
index 01b642c0bf8..5eaac6f26d5 100644
--- a/tools/perf/Documentation/perf-buildid-list.txt
+++ b/tools/perf/Documentation/perf-buildid-list.txt
@@ -18,6 +18,9 @@ perf report.
 
 OPTIONS
 -------
+-H::
+--with-hits::
+        Show only DSOs with hits.
 -i::
 --input=::
         Input file name. (default: perf.data)
diff --git a/tools/perf/Documentation/perf-diff.txt b/tools/perf/Documentation/perf-diff.txt
index 20d97d84ea1..74d7481ed7a 100644
--- a/tools/perf/Documentation/perf-diff.txt
+++ b/tools/perf/Documentation/perf-diff.txt
@@ -19,6 +19,18 @@ If no parameters are passed it will assume perf.data.old and perf.data.
 
 OPTIONS
 -------
+-M::
+--displacement::
+        Show position displacement relative to baseline.
+
+-D::
+--dump-raw-trace::
+        Dump raw trace in ASCII.
+
+-m::
+--modules::
+        Load module symbols. WARNING: use only with -k and LIVE kernel
+
 -d::
 --dsos=::
 	Only consider symbols in these dsos. CSV that understands
@@ -42,7 +54,7 @@ OPTIONS
 --field-separator=::
 
 	Use a special separator character and don't pad with spaces, replacing
-	all occurances of this separator in symbol names (and other output)
+	all occurrences of this separator in symbol names (and other output)
 	with a '.' character, that thus it's the only non valid separator.
 
 -v::
@@ -50,6 +62,13 @@ OPTIONS
 	Be verbose, for instance, show the raw counts in addition to the
 	diff.
 
+-f::
+--force::
+       Don't complain, do it.
+
+--symfs=<directory>::
+        Look for files with symbols relative to this directory.
+
 SEE ALSO
 --------
 linkperf:perf-record[1]
diff --git a/tools/perf/Documentation/perf-kvm.txt b/tools/perf/Documentation/perf-kvm.txt
index d004e19fe6d..dd84cb2f0a8 100644
--- a/tools/perf/Documentation/perf-kvm.txt
+++ b/tools/perf/Documentation/perf-kvm.txt
@@ -22,7 +22,7 @@ There are a couple of variants of perf kvm:
   a performance counter profile of guest os in realtime
   of an arbitrary workload.
 
-  'perf kvm record <command>' to record the performance couinter profile
+  'perf kvm record <command>' to record the performance counter profile
   of an arbitrary workload and save it into a perf data file. If both
   --host and --guest are input, the perf data file name is perf.data.kvm.
   If there is  no --host but --guest, the file name is perf.data.guest.
@@ -40,6 +40,12 @@ There are a couple of variants of perf kvm:
 
 OPTIONS
 -------
+-i::
+--input=::
+        Input file name.
+-o::
+--output::
+        Output file name.
 --host=::
         Collect host side performance profile.
 --guest=::
diff --git a/tools/perf/Documentation/perf-lock.txt b/tools/perf/Documentation/perf-lock.txt
index b317102138c..921de259ea1 100644
--- a/tools/perf/Documentation/perf-lock.txt
+++ b/tools/perf/Documentation/perf-lock.txt
@@ -24,6 +24,21 @@ and statistics with this 'perf lock' command.
 
   'perf lock report' reports statistical data.
 
+OPTIONS
+-------
+
+-i::
+--input=<file>::
+        Input file name.
+
+-v::
+--verbose::
+        Be more verbose (show symbol address, etc).
+
+-D::
+--dump-raw-trace::
+        Dump raw trace in ASCII.
+
 SEE ALSO
 --------
 linkperf:perf[1]
diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt
index 62de1b7f4e7..86b797a35aa 100644
--- a/tools/perf/Documentation/perf-probe.txt
+++ b/tools/perf/Documentation/perf-probe.txt
@@ -115,9 +115,9 @@ Each probe argument follows below syntax.
 
 LINE SYNTAX
 -----------
-Line range is descripted by following syntax.
+Line range is described by following syntax.
 
- "FUNC[:RLN[+NUM|-RLN2]]|SRC:ALN[+NUM|-ALN2]"
+ "FUNC[:RLN[+NUM|-RLN2]]|SRC[:ALN[+NUM|-ALN2]]"
 
 FUNC specifies the function name of showing lines. 'RLN' is the start line
 number from function entry line, and 'RLN2' is the end line number. As same as
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index a91f9f9e6e5..52462ae2645 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -39,15 +39,24 @@ OPTIONS
           be passed as follows: '\mem:addr[:[r][w][x]]'.
           If you want to profile read-write accesses in 0x1000, just set
           'mem:0x1000:rw'.
+
+--filter=<filter>::
+        Event filter.
+
 -a::
-        System-wide collection.
+--all-cpus::
+        System-wide collection from all CPUs.
 
 -l::
         Scale counter values.
 
 -p::
 --pid=::
-	Record events on existing pid.
+	Record events on existing process ID.
+
+-t::
+--tid=::
+        Record events on existing thread ID.
 
 -r::
 --realtime=::
@@ -99,6 +108,11 @@ OPTIONS
 --data::
 	Sample addresses.
 
+-T::
+--timestamp::
+	Sample timestamps. Use it with 'perf report -D' to see the timestamps,
+	for instance.
+
 -n::
 --no-samples::
 	Don't sample.
@@ -109,8 +123,8 @@ Collect raw sample records from all opened counters (default for tracepoint coun
 
 -C::
 --cpu::
-Collect samples only on the list of cpus provided. Multiple CPUs can be provided as a
-comma-sperated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+Collect samples only on the list of CPUs provided. Multiple CPUs can be provided as a
+comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
 In per-thread mode with inheritance mode on (default), samples are captured only when
 the thread executes on the designated CPUs. Default is to monitor all CPUs.
 
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 12052c9ed0b..8ba03d6e539 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -20,6 +20,11 @@ OPTIONS
 -i::
 --input=::
         Input file name. (default: perf.data)
+
+-v::
+--verbose::
+        Be more verbose. (show symbol address, etc)
+
 -d::
 --dsos=::
 	Only consider symbols in these dsos. CSV that understands
@@ -27,6 +32,10 @@ OPTIONS
 -n::
 --show-nr-samples::
 	Show the number of samples for each symbol
+
+--showcpuutilization::
+        Show sample percentage for different cpu modes.
+
 -T::
 --threads::
 	Show per-thread event counters
@@ -39,12 +48,24 @@ OPTIONS
 	Only consider these symbols. CSV that understands
 	file://filename entries.
 
+-U::
+--hide-unresolved::
+        Only display entries resolved to a symbol.
+
 -s::
 --sort=::
 	Sort by key(s): pid, comm, dso, symbol, parent.
 
+-p::
+--parent=<regex>::
+        regex filter to identify parent, see: '--sort parent'
+
+-x::
+--exclude-other::
+        Only display entries with parent-match.
+
 -w::
---field-width=::
+--column-widths=<width[,width...]>::
 	Force each column width to the provided list, for large terminal
 	readability.
 
@@ -52,19 +73,26 @@ OPTIONS
 --field-separator=::
 
 	Use a special separator character and don't pad with spaces, replacing
-	all occurances of this separator in symbol names (and other output)
+	all occurrences of this separator in symbol names (and other output)
 	with a '.' character, that thus it's the only non valid separator.
 
+-D::
+--dump-raw-trace::
+        Dump raw trace in ASCII.
+
 -g [type,min]::
 --call-graph::
-        Display callchains using type and min percent threshold.
+        Display call chains using type and min percent threshold.
 	type can be either:
-	- flat: single column, linear exposure of callchains.
+	- flat: single column, linear exposure of call chains.
 	- graph: use a graph tree, displaying absolute overhead rates.
 	- fractal: like graph, but displays relative rates. Each branch of
 		 the tree is considered as a new profiled object. +
 	Default: fractal,0.5.
 
+--pretty=<key>::
+        Pretty printing style.  key: normal, raw
+
 --stdio:: Use the stdio interface.
 
 --tui:: Use the TUI interface, that is integrated with annotate and allows
@@ -72,6 +100,25 @@ OPTIONS
 	requires a tty, if one is not present, as when piping to other
 	commands, the stdio interface is used.
 
+-k::
+--vmlinux=<file>::
+        vmlinux pathname
+
+--kallsyms=<file>::
+        kallsyms pathname
+
+-m::
+--modules::
+        Load module symbols. WARNING: This should only be used with -k and
+        a LIVE kernel.
+
+-f::
+--force::
+        Don't complain, do it.
+
+--symfs=<directory>::
+        Look for files with symbols relative to this directory.
+
 SEE ALSO
 --------
 linkperf:perf-stat[1]
diff --git a/tools/perf/Documentation/perf-sched.txt b/tools/perf/Documentation/perf-sched.txt
index 8417644a616..46822d5fde1 100644
--- a/tools/perf/Documentation/perf-sched.txt
+++ b/tools/perf/Documentation/perf-sched.txt
@@ -8,11 +8,11 @@ perf-sched - Tool to trace/measure scheduler properties (latencies)
 SYNOPSIS
 --------
 [verse]
-'perf sched' {record|latency|replay|trace}
+'perf sched' {record|latency|map|replay|trace}
 
 DESCRIPTION
 -----------
-There are four variants of perf sched:
+There are five variants of perf sched:
 
   'perf sched record <command>' to record the scheduling events
   of an arbitrary workload.
@@ -30,8 +30,22 @@ There are four variants of perf sched:
   of the workload as it occurred when it was recorded - and can repeat
   it a number of times, measuring its performance.)
 
+  'perf sched map' to print a textual context-switching outline of
+  workload captured via perf sched record.  Columns stand for
+  individual CPUs, and the two-letter shortcuts stand for tasks that
+  are running on a CPU. A '*' denotes the CPU that had the event, and
+  a dot signals an idle CPU.
+
 OPTIONS
 -------
+-i::
+--input=<file>::
+        Input file name. (default: perf.data)
+
+-v::
+--verbose::
+        Be more verbose. (show symbol address, etc)
+
 -D::
 --dump-raw-trace=::
         Display verbose dump of the sched data.
diff --git a/tools/perf/Documentation/perf-trace-perl.txt b/tools/perf/Documentation/perf-script-perl.txt
index ee6525ee6d6..5bb41e55a3a 100644
--- a/tools/perf/Documentation/perf-trace-perl.txt
+++ b/tools/perf/Documentation/perf-script-perl.txt
@@ -1,19 +1,19 @@
-perf-trace-perl(1)
+perf-script-perl(1)
 ==================
 
 NAME
 ----
-perf-trace-perl - Process trace data with a Perl script
+perf-script-perl - Process trace data with a Perl script
 
 SYNOPSIS
 --------
 [verse]
-'perf trace' [-s [Perl]:script[.pl] ]
+'perf script' [-s [Perl]:script[.pl] ]
 
 DESCRIPTION
 -----------
 
-This perf trace option is used to process perf trace data using perf's
+This perf script option is used to process perf script data using perf's
 built-in Perl interpreter.  It reads and processes the input file and
 displays the results of the trace analysis implemented in the given
 Perl script, if any.
@@ -21,7 +21,7 @@ Perl script, if any.
 STARTER SCRIPTS
 ---------------
 
-You can avoid reading the rest of this document by running 'perf trace
+You can avoid reading the rest of this document by running 'perf script
 -g perl' in the same directory as an existing perf.data trace file.
 That will generate a starter script containing a handler for each of
 the event types in the trace file; it simply prints every available
@@ -30,13 +30,13 @@ field for each event in the trace file.
 You can also look at the existing scripts in
 ~/libexec/perf-core/scripts/perl for typical examples showing how to
 do basic things like aggregate event data, print results, etc.  Also,
-the check-perf-trace.pl script, while not interesting for its results,
+the check-perf-script.pl script, while not interesting for its results,
 attempts to exercise all of the main scripting features.
 
 EVENT HANDLERS
 --------------
 
-When perf trace is invoked using a trace script, a user-defined
+When perf script is invoked using a trace script, a user-defined
 'handler function' is called for each event in the trace.  If there's
 no handler function defined for a given event type, the event is
 ignored (or passed to a 'trace_handled' function, see below) and the
@@ -112,13 +112,13 @@ write a useful trace script.  The sections below cover the rest.
 SCRIPT LAYOUT
 -------------
 
-Every perf trace Perl script should start by setting up a Perl module
+Every perf script Perl script should start by setting up a Perl module
 search path and 'use'ing a few support modules (see module
 descriptions below):
 
 ----
- use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/Perf-Trace-Util/lib";
- use lib "./Perf-Trace-Util/lib";
+ use lib "$ENV{'PERF_EXEC_PATH'}/scripts/perl/perf-script-Util/lib";
+ use lib "./perf-script-Util/lib";
  use Perf::Trace::Core;
  use Perf::Trace::Context;
  use Perf::Trace::Util;
@@ -162,7 +162,7 @@ sub trace_unhandled
 ----
 
 The remaining sections provide descriptions of each of the available
-built-in perf trace Perl modules and their associated functions.
+built-in perf script Perl modules and their associated functions.
 
 AVAILABLE MODULES AND FUNCTIONS
 -------------------------------
@@ -170,7 +170,7 @@ AVAILABLE MODULES AND FUNCTIONS
 The following sections describe the functions and variables available
 via the various Perf::Trace::* Perl modules.  To use the functions and
 variables from the given module, add the corresponding 'use
-Perf::Trace::XXX' line to your perf trace script.
+Perf::Trace::XXX' line to your perf script script.
 
 Perf::Trace::Core Module
 ~~~~~~~~~~~~~~~~~~~~~~~~
@@ -204,7 +204,7 @@ argument.
 Perf::Trace::Util Module
 ~~~~~~~~~~~~~~~~~~~~~~~~
 
-Various utility functions for use with perf trace:
+Various utility functions for use with perf script:
 
   nsecs($secs, $nsecs) - returns total nsecs given secs/nsecs pair
   nsecs_secs($nsecs) - returns whole secs portion given nsecs
@@ -214,4 +214,4 @@ Various utility functions for use with perf trace:
 
 SEE ALSO
 --------
-linkperf:perf-trace[1]
+linkperf:perf-script[1]
diff --git a/tools/perf/Documentation/perf-trace-python.txt b/tools/perf/Documentation/perf-script-python.txt
index 693be804dd3..36b38277422 100644
--- a/tools/perf/Documentation/perf-trace-python.txt
+++ b/tools/perf/Documentation/perf-script-python.txt
@@ -1,19 +1,19 @@
-perf-trace-python(1)
+perf-script-python(1)
 ====================
 
 NAME
 ----
-perf-trace-python - Process trace data with a Python script
+perf-script-python - Process trace data with a Python script
 
 SYNOPSIS
 --------
 [verse]
-'perf trace' [-s [Python]:script[.py] ]
+'perf script' [-s [Python]:script[.py] ]
 
 DESCRIPTION
 -----------
 
-This perf trace option is used to process perf trace data using perf's
+This perf script option is used to process perf script data using perf's
 built-in Python interpreter.  It reads and processes the input file and
 displays the results of the trace analysis implemented in the given
 Python script, if any.
@@ -23,15 +23,15 @@ A QUICK EXAMPLE
 
 This section shows the process, start to finish, of creating a working
 Python script that aggregates and extracts useful information from a
-raw perf trace stream.  You can avoid reading the rest of this
+raw perf script stream.  You can avoid reading the rest of this
 document if an example is enough for you; the rest of the document
 provides more details on each step and lists the library functions
 available to script writers.
 
 This example actually details the steps that were used to create the
-'syscall-counts' script you see when you list the available perf trace
-scripts via 'perf trace -l'.  As such, this script also shows how to
-integrate your script into the list of general-purpose 'perf trace'
+'syscall-counts' script you see when you list the available perf script
+scripts via 'perf script -l'.  As such, this script also shows how to
+integrate your script into the list of general-purpose 'perf script'
 scripts listed by that command.
 
 The syscall-counts script is a simple script, but demonstrates all the
@@ -105,31 +105,31 @@ That single stream will be recorded in a file in the current directory
 called perf.data.
 
 Once we have a perf.data file containing our data, we can use the -g
-'perf trace' option to generate a Python script that will contain a
+'perf script' option to generate a Python script that will contain a
 callback handler for each event type found in the perf.data trace
 stream (for more details, see the STARTER SCRIPTS section).
 
 ----
-# perf trace -g python
-generated Python script: perf-trace.py
+# perf script -g python
+generated Python script: perf-script.py
 
 The output file created also in the current directory is named
-perf-trace.py.  Here's the file in its entirety:
+perf-script.py.  Here's the file in its entirety:
 
-# perf trace event handlers, generated by perf trace -g python
+# perf script event handlers, generated by perf script -g python
 # Licensed under the terms of the GNU GPL License version 2
 
 # The common_* event handler fields are the most useful fields common to
 # all events.  They don't necessarily correspond to the 'common_*' fields
 # in the format files.  Those fields not available as handler params can
 # be retrieved using Python functions of the form common_*(context).
-# See the perf-trace-python Documentation for the list of available functions.
+# See the perf-script-python Documentation for the list of available functions.
 
 import os
 import sys
 
 sys.path.append(os.environ['PERF_EXEC_PATH'] + \
-	'/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+	'/scripts/python/perf-script-Util/lib/Perf/Trace')
 
 from perf_trace_context import *
 from Core import *
@@ -160,7 +160,7 @@ def print_header(event_name, cpu, secs, nsecs, pid, comm):
 ----
 
 At the top is a comment block followed by some import statements and a
-path append which every perf trace script should include.
+path append which every perf script script should include.
 
 Following that are a couple generated functions, trace_begin() and
 trace_end(), which are called at the beginning and the end of the
@@ -189,8 +189,8 @@ simply a utility function used for that purpose.  Let's rename the
 script and run it to see the default output:
 
 ----
-# mv perf-trace.py syscall-counts.py
-# perf trace -s syscall-counts.py
+# mv perf-script.py syscall-counts.py
+# perf script -s syscall-counts.py
 
 raw_syscalls__sys_enter     1 00840.847582083     7506 perf                  id=1, args=
 raw_syscalls__sys_enter     1 00840.847595764     7506 perf                  id=1, args=
@@ -216,7 +216,7 @@ import os
 import sys
 
 sys.path.append(os.environ['PERF_EXEC_PATH'] + \
-	'/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+	'/scripts/python/perf-script-Util/lib/Perf/Trace')
 
 from perf_trace_context import *
 from Core import *
@@ -279,7 +279,7 @@ import os
 import sys
 
 sys.path.append(os.environ['PERF_EXEC_PATH'] + \
-	'/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+	'/scripts/python/perf-script-Util/lib/Perf/Trace')
 
 from perf_trace_context import *
 from Core import *
@@ -315,7 +315,7 @@ def print_syscall_totals():
 
 The script can be run just as before:
 
-  # perf trace -s syscall-counts.py
+  # perf script -s syscall-counts.py
 
 So those are the essential steps in writing and running a script.  The
 process can be generalized to any tracepoint or set of tracepoints
@@ -324,17 +324,17 @@ interested in by looking at the list of available events shown by
 'perf list' and/or look in /sys/kernel/debug/tracing events for
 detailed event and field info, record the corresponding trace data
 using 'perf record', passing it the list of interesting events,
-generate a skeleton script using 'perf trace -g python' and modify the
+generate a skeleton script using 'perf script -g python' and modify the
 code to aggregate and display it for your particular needs.
 
 After you've done that you may end up with a general-purpose script
 that you want to keep around and have available for future use.  By
 writing a couple of very simple shell scripts and putting them in the
 right place, you can have your script listed alongside the other
-scripts listed by the 'perf trace -l' command e.g.:
+scripts listed by the 'perf script -l' command e.g.:
 
 ----
-root@tropicana:~# perf trace -l
+root@tropicana:~# perf script -l
 List of available trace scripts:
   workqueue-stats                      workqueue stats (ins/exe/create/destroy)
   wakeup-latency                       system-wide min/max/avg wakeup latency
@@ -365,14 +365,14 @@ perf record -a -e raw_syscalls:sys_enter
 The 'report' script is also a shell script with the same base name as
 your script, but with -report appended.  It should also be located in
 the perf/scripts/python/bin directory.  In that script, you write the
-'perf trace -s' command-line needed for running your script:
+'perf script -s' command-line needed for running your script:
 
 ----
 # cat kernel-source/tools/perf/scripts/python/bin/syscall-counts-report
 
 #!/bin/bash
 # description: system-wide syscall counts
-perf trace -s ~/libexec/perf-core/scripts/python/syscall-counts.py
+perf script -s ~/libexec/perf-core/scripts/python/syscall-counts.py
 ----
 
 Note that the location of the Python script given in the shell script
@@ -390,17 +390,17 @@ total 32
 drwxr-xr-x 4 trz trz 4096 2010-01-26 22:30 .
 drwxr-xr-x 4 trz trz 4096 2010-01-26 22:29 ..
 drwxr-xr-x 2 trz trz 4096 2010-01-26 22:29 bin
--rw-r--r-- 1 trz trz 2548 2010-01-26 22:29 check-perf-trace.py
-drwxr-xr-x 3 trz trz 4096 2010-01-26 22:49 Perf-Trace-Util
+-rw-r--r-- 1 trz trz 2548 2010-01-26 22:29 check-perf-script.py
+drwxr-xr-x 3 trz trz 4096 2010-01-26 22:49 perf-script-Util
 -rw-r--r-- 1 trz trz 1462 2010-01-26 22:30 syscall-counts.py
 ----
 
 Once you've done that (don't forget to do a new 'make install',
-otherwise your script won't show up at run-time), 'perf trace -l'
+otherwise your script won't show up at run-time), 'perf script -l'
 should show a new entry for your script:
 
 ----
-root@tropicana:~# perf trace -l
+root@tropicana:~# perf script -l
 List of available trace scripts:
   workqueue-stats                      workqueue stats (ins/exe/create/destroy)
   wakeup-latency                       system-wide min/max/avg wakeup latency
@@ -409,19 +409,19 @@ List of available trace scripts:
   syscall-counts                       system-wide syscall counts
 ----
 
-You can now perform the record step via 'perf trace record':
+You can now perform the record step via 'perf script record':
 
-  # perf trace record syscall-counts
+  # perf script record syscall-counts
 
-and display the output using 'perf trace report':
+and display the output using 'perf script report':
 
-  # perf trace report syscall-counts
+  # perf script report syscall-counts
 
 STARTER SCRIPTS
 ---------------
 
 You can quickly get started writing a script for a particular set of
-trace data by generating a skeleton script using 'perf trace -g
+trace data by generating a skeleton script using 'perf script -g
 python' in the same directory as an existing perf.data trace file.
 That will generate a starter script containing a handler for each of
 the event types in the trace file; it simply prints every available
@@ -430,13 +430,13 @@ field for each event in the trace file.
 You can also look at the existing scripts in
 ~/libexec/perf-core/scripts/python for typical examples showing how to
 do basic things like aggregate event data, print results, etc.  Also,
-the check-perf-trace.py script, while not interesting for its results,
+the check-perf-script.py script, while not interesting for its results,
 attempts to exercise all of the main scripting features.
 
 EVENT HANDLERS
 --------------
 
-When perf trace is invoked using a trace script, a user-defined
+When perf script is invoked using a trace script, a user-defined
 'handler function' is called for each event in the trace.  If there's
 no handler function defined for a given event type, the event is
 ignored (or passed to a 'trace_handled' function, see below) and the
@@ -510,7 +510,7 @@ write a useful trace script.  The sections below cover the rest.
 SCRIPT LAYOUT
 -------------
 
-Every perf trace Python script should start by setting up a Python
+Every perf script Python script should start by setting up a Python
 module search path and 'import'ing a few support modules (see module
 descriptions below):
 
@@ -519,7 +519,7 @@ descriptions below):
  import sys
 
  sys.path.append(os.environ['PERF_EXEC_PATH'] + \
-	      '/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+	      '/scripts/python/perf-script-Util/lib/Perf/Trace')
 
  from perf_trace_context import *
  from Core import *
@@ -559,15 +559,15 @@ def trace_unhandled(event_name, context, common_cpu, common_secs,
 ----
 
 The remaining sections provide descriptions of each of the available
-built-in perf trace Python modules and their associated functions.
+built-in perf script Python modules and their associated functions.
 
 AVAILABLE MODULES AND FUNCTIONS
 -------------------------------
 
 The following sections describe the functions and variables available
-via the various perf trace Python modules.  To use the functions and
+via the various perf script Python modules.  To use the functions and
 variables from the given module, add the corresponding 'from XXXX
-import' line to your perf trace script.
+import' line to your perf script script.
 
 Core.py Module
 ~~~~~~~~~~~~~~
@@ -610,7 +610,7 @@ argument.
 Util.py Module
 ~~~~~~~~~~~~~~
 
-Various utility functions for use with perf trace:
+Various utility functions for use with perf script:
 
   nsecs(secs, nsecs) - returns total nsecs given secs/nsecs pair
   nsecs_secs(nsecs) - returns whole secs portion given nsecs
@@ -620,4 +620,4 @@ Various utility functions for use with perf trace:
 
 SEE ALSO
 --------
-linkperf:perf-trace[1]
+linkperf:perf-script[1]
diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt
new file mode 100644
index 00000000000..29ad94293cd
--- /dev/null
+++ b/tools/perf/Documentation/perf-script.txt
@@ -0,0 +1,118 @@
+perf-script(1)
+=============
+
+NAME
+----
+perf-script - Read perf.data (created by perf record) and display trace output
+
+SYNOPSIS
+--------
+[verse]
+'perf script' [<options>]
+'perf script' [<options>] record <script> [<record-options>] <command>
+'perf script' [<options>] report <script> [script-args]
+'perf script' [<options>] <script> <required-script-args> [<record-options>] <command>
+'perf script' [<options>] <top-script> [script-args]
+
+DESCRIPTION
+-----------
+This command reads the input file and displays the trace recorded.
+
+There are several variants of perf script:
+
+  'perf script' to see a detailed trace of the workload that was
+  recorded.
+
+  You can also run a set of pre-canned scripts that aggregate and
+  summarize the raw trace data in various ways (the list of scripts is
+  available via 'perf script -l').  The following variants allow you to
+  record and run those scripts:
+
+  'perf script record <script> <command>' to record the events required
+  for 'perf script report'.  <script> is the name displayed in the
+  output of 'perf script --list' i.e. the actual script name minus any
+  language extension.  If <command> is not specified, the events are
+  recorded using the -a (system-wide) 'perf record' option.
+
+  'perf script report <script> [args]' to run and display the results
+  of <script>.  <script> is the name displayed in the output of 'perf
+  trace --list' i.e. the actual script name minus any language
+  extension.  The perf.data output from a previous run of 'perf script
+  record <script>' is used and should be present for this command to
+  succeed.  [args] refers to the (mainly optional) args expected by
+  the script.
+
+  'perf script <script> <required-script-args> <command>' to both
+  record the events required for <script> and to run the <script>
+  using 'live-mode' i.e. without writing anything to disk.  <script>
+  is the name displayed in the output of 'perf script --list' i.e. the
+  actual script name minus any language extension.  If <command> is
+  not specified, the events are recorded using the -a (system-wide)
+  'perf record' option.  If <script> has any required args, they
+  should be specified before <command>.  This mode doesn't allow for
+  optional script args to be specified; if optional script args are
+  desired, they can be specified using separate 'perf script record'
+  and 'perf script report' commands, with the stdout of the record step
+  piped to the stdin of the report script, using the '-o -' and '-i -'
+  options of the corresponding commands.
+
+  'perf script <top-script>' to both record the events required for
+  <top-script> and to run the <top-script> using 'live-mode'
+  i.e. without writing anything to disk.  <top-script> is the name
+  displayed in the output of 'perf script --list' i.e. the actual
+  script name minus any language extension; a <top-script> is defined
+  as any script name ending with the string 'top'.
+
+  [<record-options>] can be passed to the record steps of 'perf script
+  record' and 'live-mode' variants; this isn't possible however for
+  <top-script> 'live-mode' or 'perf script report' variants.
+
+  See the 'SEE ALSO' section for links to language-specific
+  information on how to write and run your own trace scripts.
+
+OPTIONS
+-------
+<command>...::
+	Any command you can specify in a shell.
+
+-D::
+--dump-raw-script=::
+        Display verbose dump of the trace data.
+
+-L::
+--Latency=::
+        Show latency attributes (irqs/preemption disabled, etc).
+
+-l::
+--list=::
+        Display a list of available trace scripts.
+
+-s ['lang']::
+--script=::
+        Process trace data with the given script ([lang]:script[.ext]).
+	If the string 'lang' is specified in place of a script name, a
+        list of supported languages will be displayed instead.
+
+-g::
+--gen-script=::
+        Generate perf-script.[ext] starter script for given language,
+        using current perf.data.
+
+-a::
+        Force system-wide collection.  Scripts run without a <command>
+        normally use -a by default, while scripts run with a <command>
+        normally don't - this option allows the latter to be run in
+        system-wide mode.
+
+-i::
+--input=::
+        Input file name.
+
+-d::
+--debug-mode::
+        Do various checks like samples ordering and lost events.
+
+SEE ALSO
+--------
+linkperf:perf-record[1], linkperf:perf-script-perl[1],
+linkperf:perf-script-python[1]
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index 4b3a2d46b43..b6da7affbbe 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -8,8 +8,8 @@ perf-stat - Run a command and gather performance counter statistics
 SYNOPSIS
 --------
 [verse]
-'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] <command>
-'perf stat' [-e <EVENT> | --event=EVENT] [-S] [-a] -- <command> [<options>]
+'perf stat' [-e <EVENT> | --event=EVENT] [-a] <command>
+'perf stat' [-e <EVENT> | --event=EVENT] [-a] -- <command> [<options>]
 
 DESCRIPTION
 -----------
@@ -35,24 +35,54 @@ OPTIONS
         child tasks do not inherit counters
 -p::
 --pid=<pid>::
-        stat events on existing pid
+        stat events on existing process id
+
+-t::
+--tid=<tid>::
+        stat events on existing thread id
+
 
 -a::
-        system-wide collection
+--all-cpus::
+        system-wide collection from all CPUs
 
 -c::
-        scale counter values
+--scale::
+	scale/normalize counter values
+
+-r::
+--repeat=<n>::
+	repeat command and print average + stddev (max: 100)
 
 -B::
+--big-num::
         print large numbers with thousands' separators according to locale
 
 -C::
 --cpu=::
-Count only on the list of cpus provided. Multiple CPUs can be provided as a
-comma-sperated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+Count only on the list of CPUs provided. Multiple CPUs can be provided as a
+comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
 In per-thread mode, this option is ignored. The -a option is still necessary
 to activate system-wide monitoring. Default is to count on all CPUs.
 
+-A::
+--no-aggr::
+Do not aggregate counts across all monitored CPUs in system-wide mode (-a).
+This option is only valid in system-wide mode.
+
+-n::
+--null::
+        null run - don't start any counters
+
+-v::
+--verbose::
+        be more verbose (show counter open errors, etc)
+
+-x SEP::
+--field-separator SEP::
+print counts using a CSV-style output to make it easy to import directly into
+spreadsheets. Columns are separated by the string specified in SEP.
+
 EXAMPLES
 --------
 
diff --git a/tools/perf/Documentation/perf-test.txt b/tools/perf/Documentation/perf-test.txt
index 1c4b5f5b7f7..2c3b462f64b 100644
--- a/tools/perf/Documentation/perf-test.txt
+++ b/tools/perf/Documentation/perf-test.txt
@@ -12,7 +12,7 @@ SYNOPSIS
 
 DESCRIPTION
 -----------
-This command does assorted sanity tests, initially thru linked routines but
+This command does assorted sanity tests, initially through linked routines but
 also will look for a directory with more tests in the form of scripts.
 
 OPTIONS
diff --git a/tools/perf/Documentation/perf-timechart.txt b/tools/perf/Documentation/perf-timechart.txt
index 4b1788355ec..d7b79e2ba2a 100644
--- a/tools/perf/Documentation/perf-timechart.txt
+++ b/tools/perf/Documentation/perf-timechart.txt
@@ -38,6 +38,8 @@ OPTIONS
 --process::
         Select the processes to display, by name or PID
 
+--symfs=<directory>::
+        Look for files with symbols relative to this directory.
 
 SEE ALSO
 --------
diff --git a/tools/perf/Documentation/perf-top.txt b/tools/perf/Documentation/perf-top.txt
index 1f9687663f2..f6eb1cdafb7 100644
--- a/tools/perf/Documentation/perf-top.txt
+++ b/tools/perf/Documentation/perf-top.txt
@@ -12,7 +12,7 @@ SYNOPSIS
 
 DESCRIPTION
 -----------
-This command generates and displays a performance counter profile in realtime.
+This command generates and displays a performance counter profile in real time.
 
 
 OPTIONS
@@ -27,8 +27,8 @@ OPTIONS
 
 -C <cpu-list>::
 --cpu=<cpu>::
-Monitor only on the list of cpus provided. Multiple CPUs can be provided as a
-comma-sperated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
+Monitor only on the list of CPUs provided. Multiple CPUs can be provided as a
+comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
 Default is to monitor all CPUS.
 
 -d <seconds>::
@@ -50,6 +50,10 @@ Default is to monitor all CPUS.
 --count-filter=<count>::
 	Only display functions with more events than this.
 
+-g::
+--group::
+        Put the counters into a counter group.
+
 -F <freq>::
 --freq=<freq>::
 	Profile at this frequency.
@@ -68,7 +72,11 @@ Default is to monitor all CPUS.
 
 -p <pid>::
 --pid=<pid>::
-	Profile events on existing pid.
+	Profile events on existing Process ID.
+
+-t <tid>::
+--tid=<tid>::
+        Profile events on existing thread ID.
 
 -r <priority>::
 --realtime=<priority>::
@@ -78,6 +86,18 @@ Default is to monitor all CPUS.
 --sym-annotate=<symbol>::
         Annotate this symbol.
 
+-K::
+--hide_kernel_symbols::
+        Hide kernel symbols.
+
+-U::
+--hide_user_symbols::
+        Hide user symbols.
+
+-D::
+--dump-symtab::
+        Dump the symbol table used for profiling.
+
 -v::
 --verbose::
 	Be more verbose (show counter open errors, etc).
diff --git a/tools/perf/Documentation/perf-trace.txt b/tools/perf/Documentation/perf-trace.txt
deleted file mode 100644
index 122ec9dc485..00000000000
--- a/tools/perf/Documentation/perf-trace.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-perf-trace(1)
-=============
-
-NAME
-----
-perf-trace - Read perf.data (created by perf record) and display trace output
-
-SYNOPSIS
---------
-[verse]
-'perf trace' {record <script> | report <script> [args] }
-
-DESCRIPTION
------------
-This command reads the input file and displays the trace recorded.
-
-There are several variants of perf trace:
-
-  'perf trace' to see a detailed trace of the workload that was
-  recorded.
-
-  You can also run a set of pre-canned scripts that aggregate and
-  summarize the raw trace data in various ways (the list of scripts is
-  available via 'perf trace -l').  The following variants allow you to
-  record and run those scripts:
-
-  'perf trace record <script>' to record the events required for 'perf
-  trace report'.  <script> is the name displayed in the output of
-  'perf trace --list' i.e. the actual script name minus any language
-  extension.
-
-  'perf trace report <script>' to run and display the results of
-  <script>.  <script> is the name displayed in the output of 'perf
-  trace --list' i.e. the actual script name minus any language
-  extension.  The perf.data output from a previous run of 'perf trace
-  record <script>' is used and should be present for this command to
-  succeed.
-
-  See the 'SEE ALSO' section for links to language-specific
-  information on how to write and run your own trace scripts.
-
-OPTIONS
--------
--D::
---dump-raw-trace=::
-        Display verbose dump of the trace data.
-
--L::
---Latency=::
-        Show latency attributes (irqs/preemption disabled, etc).
-
--l::
---list=::
-        Display a list of available trace scripts.
-
--s ['lang']::
---script=::
-        Process trace data with the given script ([lang]:script[.ext]).
-	If the string 'lang' is specified in place of a script name, a
-        list of supported languages will be displayed instead.
-
--g::
---gen-script=::
-        Generate perf-trace.[ext] starter script for given language,
-        using current perf.data.
-
-SEE ALSO
---------
-linkperf:perf-record[1], linkperf:perf-trace-perl[1],
-linkperf:perf-trace-python[1]
diff --git a/tools/perf/MANIFEST b/tools/perf/MANIFEST
index 8c7fc0c8f0b..c12659d8cb2 100644
--- a/tools/perf/MANIFEST
+++ b/tools/perf/MANIFEST
@@ -7,6 +7,7 @@ include/linux/stringify.h
 lib/rbtree.c
 include/linux/swab.h
 arch/*/include/asm/unistd*.h
+arch/*/lib/memcpy*.S
 include/linux/poison.h
 include/linux/magic.h
 include/linux/hw_breakpoint.h
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index d1db0f676a4..1b9b13ee2a7 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -185,7 +185,10 @@ ifeq ($(ARCH),i386)
         ARCH := x86
 endif
 ifeq ($(ARCH),x86_64)
+	RAW_ARCH := x86_64
         ARCH := x86
+	ARCH_CFLAGS := -DARCH_X86_64
+	ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S
 endif
 
 # CFLAGS and LDFLAGS are for the users to override from the command line.
@@ -375,6 +378,7 @@ LIB_H += util/include/linux/prefetch.h
 LIB_H += util/include/linux/rbtree.h
 LIB_H += util/include/linux/string.h
 LIB_H += util/include/linux/types.h
+LIB_H += util/include/linux/linkage.h
 LIB_H += util/include/asm/asm-offsets.h
 LIB_H += util/include/asm/bug.h
 LIB_H += util/include/asm/byteorder.h
@@ -383,6 +387,8 @@ LIB_H += util/include/asm/swab.h
 LIB_H += util/include/asm/system.h
 LIB_H += util/include/asm/uaccess.h
 LIB_H += util/include/dwarf-regs.h
+LIB_H += util/include/asm/dwarf2.h
+LIB_H += util/include/asm/cpufeature.h
 LIB_H += perf.h
 LIB_H += util/cache.h
 LIB_H += util/callchain.h
@@ -390,6 +396,7 @@ LIB_H += util/build-id.h
 LIB_H += util/debug.h
 LIB_H += util/debugfs.h
 LIB_H += util/event.h
+LIB_H += util/evsel.h
 LIB_H += util/exec_cmd.h
 LIB_H += util/types.h
 LIB_H += util/levenshtein.h
@@ -398,6 +405,7 @@ LIB_H += util/parse-options.h
 LIB_H += util/parse-events.h
 LIB_H += util/quote.h
 LIB_H += util/util.h
+LIB_H += util/xyarray.h
 LIB_H += util/header.h
 LIB_H += util/help.h
 LIB_H += util/session.h
@@ -417,6 +425,7 @@ LIB_H += util/probe-finder.h
 LIB_H += util/probe-event.h
 LIB_H += util/pstack.h
 LIB_H += util/cpumap.h
+LIB_H += $(ARCH_INCLUDE)
 
 LIB_OBJS += $(OUTPUT)util/abspath.o
 LIB_OBJS += $(OUTPUT)util/alias.o
@@ -426,6 +435,7 @@ LIB_OBJS += $(OUTPUT)util/ctype.o
 LIB_OBJS += $(OUTPUT)util/debugfs.o
 LIB_OBJS += $(OUTPUT)util/environment.o
 LIB_OBJS += $(OUTPUT)util/event.o
+LIB_OBJS += $(OUTPUT)util/evsel.o
 LIB_OBJS += $(OUTPUT)util/exec_cmd.o
 LIB_OBJS += $(OUTPUT)util/help.o
 LIB_OBJS += $(OUTPUT)util/levenshtein.o
@@ -463,6 +473,7 @@ LIB_OBJS += $(OUTPUT)util/sort.o
 LIB_OBJS += $(OUTPUT)util/hist.o
 LIB_OBJS += $(OUTPUT)util/probe-event.o
 LIB_OBJS += $(OUTPUT)util/util.o
+LIB_OBJS += $(OUTPUT)util/xyarray.o
 LIB_OBJS += $(OUTPUT)util/cpumap.o
 
 BUILTIN_OBJS += $(OUTPUT)builtin-annotate.o
@@ -472,6 +483,9 @@ BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
 # Benchmark modules
 BUILTIN_OBJS += $(OUTPUT)bench/sched-messaging.o
 BUILTIN_OBJS += $(OUTPUT)bench/sched-pipe.o
+ifeq ($(RAW_ARCH),x86_64)
+BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy-x86-64-asm.o
+endif
 BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy.o
 
 BUILTIN_OBJS += $(OUTPUT)builtin-diff.o
@@ -485,7 +499,7 @@ BUILTIN_OBJS += $(OUTPUT)builtin-report.o
 BUILTIN_OBJS += $(OUTPUT)builtin-stat.o
 BUILTIN_OBJS += $(OUTPUT)builtin-timechart.o
 BUILTIN_OBJS += $(OUTPUT)builtin-top.o
-BUILTIN_OBJS += $(OUTPUT)builtin-trace.o
+BUILTIN_OBJS += $(OUTPUT)builtin-script.o
 BUILTIN_OBJS += $(OUTPUT)builtin-probe.o
 BUILTIN_OBJS += $(OUTPUT)builtin-kmem.o
 BUILTIN_OBJS += $(OUTPUT)builtin-lock.o
@@ -507,7 +521,7 @@ PERFLIBS = $(LIB_FILE)
 -include config.mak
 
 ifndef NO_DWARF
-FLAGS_DWARF=$(ALL_CFLAGS) -I/usr/include/elfutils -ldw -lelf $(ALL_LDFLAGS) $(EXTLIBS)
+FLAGS_DWARF=$(ALL_CFLAGS) -ldw -lelf $(ALL_LDFLAGS) $(EXTLIBS)
 ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF)),y)
 	msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
 	NO_DWARF := 1
@@ -554,7 +568,7 @@ ifndef NO_DWARF
 ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
 	msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
 else
-	BASIC_CFLAGS += -I/usr/include/elfutils -DDWARF_SUPPORT
+	BASIC_CFLAGS += -DDWARF_SUPPORT
 	EXTLIBS += -lelf -ldw
 	LIB_OBJS += $(OUTPUT)util/probe-finder.o
 endif # PERF_HAVE_DWARF_REGS
@@ -891,13 +905,14 @@ prefix_SQ = $(subst ','\'',$(prefix))
 SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
 PERL_PATH_SQ = $(subst ','\'',$(PERL_PATH))
 
-LIBS = $(PERFLIBS) $(EXTLIBS)
+LIBS = -Wl,--whole-archive $(PERFLIBS) -Wl,--no-whole-archive $(EXTLIBS)
 
 BASIC_CFLAGS += -DSHA1_HEADER='$(SHA1_HEADER_SQ)' \
 	$(COMPAT_CFLAGS)
 LIB_OBJS += $(COMPAT_OBJS)
 
 ALL_CFLAGS += $(BASIC_CFLAGS)
+ALL_CFLAGS += $(ARCH_CFLAGS)
 ALL_LDFLAGS += $(BASIC_LDFLAGS)
 
 export TAR INSTALL DESTDIR SHELL_PATH
diff --git a/tools/perf/arch/s390/Makefile b/tools/perf/arch/s390/Makefile
new file mode 100644
index 00000000000..15130b50dfe
--- /dev/null
+++ b/tools/perf/arch/s390/Makefile
@@ -0,0 +1,4 @@
+ifndef NO_DWARF
+PERF_HAVE_DWARF_REGS := 1
+LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+endif
diff --git a/tools/perf/arch/s390/util/dwarf-regs.c b/tools/perf/arch/s390/util/dwarf-regs.c
new file mode 100644
index 00000000000..e19653e025f
--- /dev/null
+++ b/tools/perf/arch/s390/util/dwarf-regs.c
@@ -0,0 +1,22 @@
+/*
+ * Mapping of DWARF debug register numbers into register names.
+ *
+ *    Copyright IBM Corp. 2010
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>,
+ *
+ */
+
+#include <libio.h>
+#include <dwarf-regs.h>
+
+#define NUM_GPRS 16
+
+static const char *gpr_names[NUM_GPRS] = {
+	"%r0", "%r1",  "%r2",  "%r3",  "%r4",  "%r5",  "%r6",  "%r7",
+	"%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15",
+};
+
+const char *get_arch_regstr(unsigned int n)
+{
+	return (n >= NUM_GPRS) ? NULL : gpr_names[n];
+}
diff --git a/tools/perf/bench/mem-memcpy-arch.h b/tools/perf/bench/mem-memcpy-arch.h
new file mode 100644
index 00000000000..a72e36cb539
--- /dev/null
+++ b/tools/perf/bench/mem-memcpy-arch.h
@@ -0,0 +1,12 @@
+
+#ifdef ARCH_X86_64
+
+#define MEMCPY_FN(fn, name, desc)		\
+	extern void *fn(void *, const void *, size_t);
+
+#include "mem-memcpy-x86-64-asm-def.h"
+
+#undef MEMCPY_FN
+
+#endif
+
diff --git a/tools/perf/bench/mem-memcpy-x86-64-asm-def.h b/tools/perf/bench/mem-memcpy-x86-64-asm-def.h
new file mode 100644
index 00000000000..d588b87696f
--- /dev/null
+++ b/tools/perf/bench/mem-memcpy-x86-64-asm-def.h
@@ -0,0 +1,4 @@
+
+MEMCPY_FN(__memcpy,
+	"x86-64-unrolled",
+	"unrolled memcpy() in arch/x86/lib/memcpy_64.S")
diff --git a/tools/perf/bench/mem-memcpy-x86-64-asm.S b/tools/perf/bench/mem-memcpy-x86-64-asm.S
new file mode 100644
index 00000000000..a57b66e853c
--- /dev/null
+++ b/tools/perf/bench/mem-memcpy-x86-64-asm.S
@@ -0,0 +1,2 @@
+
+#include "../../../arch/x86/lib/memcpy_64.S"
diff --git a/tools/perf/bench/mem-memcpy.c b/tools/perf/bench/mem-memcpy.c
index 38dae746514..db82021f4b9 100644
--- a/tools/perf/bench/mem-memcpy.c
+++ b/tools/perf/bench/mem-memcpy.c
@@ -12,6 +12,7 @@
 #include "../util/parse-options.h"
 #include "../util/header.h"
 #include "bench.h"
+#include "mem-memcpy-arch.h"
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -23,8 +24,10 @@
 
 static const char	*length_str	= "1MB";
 static const char	*routine	= "default";
-static bool		use_clock	= false;
+static bool		use_clock;
 static int		clock_fd;
+static bool		only_prefault;
+static bool		no_prefault;
 
 static const struct option options[] = {
 	OPT_STRING('l', "length", &length_str, "1MB",
@@ -34,19 +37,33 @@ static const struct option options[] = {
 		    "Specify routine to copy"),
 	OPT_BOOLEAN('c', "clock", &use_clock,
 		    "Use CPU clock for measuring"),
+	OPT_BOOLEAN('o', "only-prefault", &only_prefault,
+		    "Show only the result with page faults before memcpy()"),
+	OPT_BOOLEAN('n', "no-prefault", &no_prefault,
+		    "Show only the result without page faults before memcpy()"),
 	OPT_END()
 };
 
+typedef void *(*memcpy_t)(void *, const void *, size_t);
+
 struct routine {
 	const char *name;
 	const char *desc;
-	void * (*fn)(void *dst, const void *src, size_t len);
+	memcpy_t fn;
 };
 
 struct routine routines[] = {
 	{ "default",
 	  "Default memcpy() provided by glibc",
 	  memcpy },
+#ifdef ARCH_X86_64
+
+#define MEMCPY_FN(fn, name, desc) { name, desc, fn },
+#include "mem-memcpy-x86-64-asm-def.h"
+#undef MEMCPY_FN
+
+#endif
+
 	{ NULL,
 	  NULL,
 	  NULL   }
@@ -89,29 +106,98 @@ static double timeval2double(struct timeval *ts)
 		(double)ts->tv_usec / (double)1000000;
 }
 
+static void alloc_mem(void **dst, void **src, size_t length)
+{
+	*dst = zalloc(length);
+	if (!dst)
+		die("memory allocation failed - maybe length is too large?\n");
+
+	*src = zalloc(length);
+	if (!src)
+		die("memory allocation failed - maybe length is too large?\n");
+}
+
+static u64 do_memcpy_clock(memcpy_t fn, size_t len, bool prefault)
+{
+	u64 clock_start = 0ULL, clock_end = 0ULL;
+	void *src = NULL, *dst = NULL;
+
+	alloc_mem(&src, &dst, len);
+
+	if (prefault)
+		fn(dst, src, len);
+
+	clock_start = get_clock();
+	fn(dst, src, len);
+	clock_end = get_clock();
+
+	free(src);
+	free(dst);
+	return clock_end - clock_start;
+}
+
+static double do_memcpy_gettimeofday(memcpy_t fn, size_t len, bool prefault)
+{
+	struct timeval tv_start, tv_end, tv_diff;
+	void *src = NULL, *dst = NULL;
+
+	alloc_mem(&src, &dst, len);
+
+	if (prefault)
+		fn(dst, src, len);
+
+	BUG_ON(gettimeofday(&tv_start, NULL));
+	fn(dst, src, len);
+	BUG_ON(gettimeofday(&tv_end, NULL));
+
+	timersub(&tv_end, &tv_start, &tv_diff);
+
+	free(src);
+	free(dst);
+	return (double)((double)len / timeval2double(&tv_diff));
+}
+
+#define pf (no_prefault ? 0 : 1)
+
+#define print_bps(x) do {					\
+		if (x < K)					\
+			printf(" %14lf B/Sec", x);		\
+		else if (x < K * K)				\
+			printf(" %14lfd KB/Sec", x / K);	\
+		else if (x < K * K * K)				\
+			printf(" %14lf MB/Sec", x / K / K);	\
+		else						\
+			printf(" %14lf GB/Sec", x / K / K / K); \
+	} while (0)
+
 int bench_mem_memcpy(int argc, const char **argv,
 		     const char *prefix __used)
 {
 	int i;
-	void *dst, *src;
-	size_t length;
-	double bps = 0.0;
-	struct timeval tv_start, tv_end, tv_diff;
-	u64 clock_start, clock_end, clock_diff;
+	size_t len;
+	double result_bps[2];
+	u64 result_clock[2];
 
-	clock_start = clock_end = clock_diff = 0ULL;
 	argc = parse_options(argc, argv, options,
 			     bench_mem_memcpy_usage, 0);
 
-	tv_diff.tv_sec = 0;
-	tv_diff.tv_usec = 0;
-	length = (size_t)perf_atoll((char *)length_str);
+	if (use_clock)
+		init_clock();
+
+	len = (size_t)perf_atoll((char *)length_str);
 
-	if ((s64)length <= 0) {
+	result_clock[0] = result_clock[1] = 0ULL;
+	result_bps[0] = result_bps[1] = 0.0;
+
+	if ((s64)len <= 0) {
 		fprintf(stderr, "Invalid length:%s\n", length_str);
 		return 1;
 	}
 
+	/* same to without specifying either of prefault and no-prefault */
+	if (only_prefault && no_prefault)
+		only_prefault = no_prefault = false;
+
 	for (i = 0; routines[i].name; i++) {
 		if (!strcmp(routines[i].name, routine))
 			break;
@@ -126,61 +212,80 @@ int bench_mem_memcpy(int argc, const char **argv,
 		return 1;
 	}
 
-	dst = zalloc(length);
-	if (!dst)
-		die("memory allocation failed - maybe length is too large?\n");
-
-	src = zalloc(length);
-	if (!src)
-		die("memory allocation failed - maybe length is too large?\n");
-
-	if (bench_format == BENCH_FORMAT_DEFAULT) {
-		printf("# Copying %s Bytes from %p to %p ...\n\n",
-		       length_str, src, dst);
-	}
-
-	if (use_clock) {
-		init_clock();
-		clock_start = get_clock();
-	} else {
-		BUG_ON(gettimeofday(&tv_start, NULL));
-	}
-
-	routines[i].fn(dst, src, length);
+	if (bench_format == BENCH_FORMAT_DEFAULT)
+		printf("# Copying %s Bytes ...\n\n", length_str);
 
-	if (use_clock) {
-		clock_end = get_clock();
-		clock_diff = clock_end - clock_start;
+	if (!only_prefault && !no_prefault) {
+		/* show both of results */
+		if (use_clock) {
+			result_clock[0] =
+				do_memcpy_clock(routines[i].fn, len, false);
+			result_clock[1] =
+				do_memcpy_clock(routines[i].fn, len, true);
+		} else {
+			result_bps[0] =
+				do_memcpy_gettimeofday(routines[i].fn,
+						len, false);
+			result_bps[1] =
+				do_memcpy_gettimeofday(routines[i].fn,
+						len, true);
+		}
 	} else {
-		BUG_ON(gettimeofday(&tv_end, NULL));
-		timersub(&tv_end, &tv_start, &tv_diff);
-		bps = (double)((double)length / timeval2double(&tv_diff));
+		if (use_clock) {
+			result_clock[pf] =
+				do_memcpy_clock(routines[i].fn,
+						len, only_prefault);
+		} else {
+			result_bps[pf] =
+				do_memcpy_gettimeofday(routines[i].fn,
+						len, only_prefault);
+		}
 	}
 
 	switch (bench_format) {
 	case BENCH_FORMAT_DEFAULT:
-		if (use_clock) {
-			printf(" %14lf Clock/Byte\n",
-			       (double)clock_diff / (double)length);
-		} else {
-			if (bps < K)
-				printf(" %14lf B/Sec\n", bps);
-			else if (bps < K * K)
-				printf(" %14lfd KB/Sec\n", bps / 1024);
-			else if (bps < K * K * K)
-				printf(" %14lf MB/Sec\n", bps / 1024 / 1024);
-			else {
-				printf(" %14lf GB/Sec\n",
-				       bps / 1024 / 1024 / 1024);
+		if (!only_prefault && !no_prefault) {
+			if (use_clock) {
+				printf(" %14lf Clock/Byte\n",
+					(double)result_clock[0]
+					/ (double)len);
+				printf(" %14lf Clock/Byte (with prefault)\n",
+					(double)result_clock[1]
+					/ (double)len);
+			} else {
+				print_bps(result_bps[0]);
+				printf("\n");
+				print_bps(result_bps[1]);
+				printf(" (with prefault)\n");
 			}
+		} else {
+			if (use_clock) {
+				printf(" %14lf Clock/Byte",
+					(double)result_clock[pf]
+					/ (double)len);
+			} else
+				print_bps(result_bps[pf]);
+
+			printf("%s\n", only_prefault ? " (with prefault)" : "");
 		}
 		break;
 	case BENCH_FORMAT_SIMPLE:
-		if (use_clock) {
-			printf("%14lf\n",
-			       (double)clock_diff / (double)length);
-		} else
-			printf("%lf\n", bps);
+		if (!only_prefault && !no_prefault) {
+			if (use_clock) {
+				printf("%lf %lf\n",
+					(double)result_clock[0] / (double)len,
+					(double)result_clock[1] / (double)len);
+			} else {
+				printf("%lf %lf\n",
+					result_bps[0], result_bps[1]);
+			}
+		} else {
+			if (use_clock) {
+				printf("%lf\n", (double)result_clock[pf]
+					/ (double)len);
+			} else
+				printf("%lf\n", result_bps[pf]);
+		}
 		break;
 	default:
 		/* reaching this means there's some disaster: */
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 6d5604d8df9..c056cdc0691 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -58,12 +58,12 @@ static int hists__add_entry(struct hists *self, struct addr_location *al)
 	return hist_entry__inc_addr_samples(he, al->addr);
 }
 
-static int process_sample_event(event_t *event, struct perf_session *session)
+static int process_sample_event(event_t *event, struct sample_data *sample,
+				struct perf_session *session)
 {
 	struct addr_location al;
-	struct sample_data data;
 
-	if (event__preprocess_sample(event, session, &al, &data, NULL) < 0) {
+	if (event__preprocess_sample(event, session, &al, sample, NULL) < 0) {
 		pr_warning("problem processing %d event, skipping it.\n",
 			   event->header.type);
 		return -1;
@@ -375,6 +375,8 @@ static struct perf_event_ops event_ops = {
 	.mmap	= event__process_mmap,
 	.comm	= event__process_comm,
 	.fork	= event__process_task,
+	.ordered_samples = true,
+	.ordering_requires_timestamps = true,
 };
 
 static int __cmd_annotate(void)
@@ -382,7 +384,7 @@ static int __cmd_annotate(void)
 	int ret;
 	struct perf_session *session;
 
-	session = perf_session__new(input_name, O_RDONLY, force, false);
+	session = perf_session__new(input_name, O_RDONLY, force, false, &event_ops);
 	if (session == NULL)
 		return -ENOMEM;
 
diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c
index 44a47e13bd6..5af32ae9031 100644
--- a/tools/perf/builtin-buildid-list.c
+++ b/tools/perf/builtin-buildid-list.c
@@ -36,10 +36,10 @@ static const struct option options[] = {
 
 static int __cmd_buildid_list(void)
 {
-	int err = -1;
 	struct perf_session *session;
 
-	session = perf_session__new(input_name, O_RDONLY, force, false);
+	session = perf_session__new(input_name, O_RDONLY, force, false,
+				    &build_id__mark_dso_hit_ops);
 	if (session == NULL)
 		return -1;
 
@@ -49,7 +49,7 @@ static int __cmd_buildid_list(void)
 	perf_session__fprintf_dsos_buildid(session, stdout, with_hits);
 
 	perf_session__delete(session);
-	return err;
+	return 0;
 }
 
 int cmd_buildid_list(int argc, const char **argv, const char *prefix __used)
diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c
index fca1d440291..3153e492dbc 100644
--- a/tools/perf/builtin-diff.c
+++ b/tools/perf/builtin-diff.c
@@ -30,12 +30,13 @@ static int hists__add_entry(struct hists *self,
 	return -ENOMEM;
 }
 
-static int diff__process_sample_event(event_t *event, struct perf_session *session)
+static int diff__process_sample_event(event_t *event,
+				      struct sample_data *sample,
+				      struct perf_session *session)
 {
 	struct addr_location al;
-	struct sample_data data = { .period = 1, };
 
-	if (event__preprocess_sample(event, session, &al, &data, NULL) < 0) {
+	if (event__preprocess_sample(event, session, &al, sample, NULL) < 0) {
 		pr_warning("problem processing %d event, skipping it.\n",
 			   event->header.type);
 		return -1;
@@ -44,12 +45,12 @@ static int diff__process_sample_event(event_t *event, struct perf_session *sessi
 	if (al.filtered || al.sym == NULL)
 		return 0;
 
-	if (hists__add_entry(&session->hists, &al, data.period)) {
+	if (hists__add_entry(&session->hists, &al, sample->period)) {
 		pr_warning("problem incrementing symbol period, skipping event\n");
 		return -1;
 	}
 
-	session->hists.stats.total_period += data.period;
+	session->hists.stats.total_period += sample->period;
 	return 0;
 }
 
@@ -60,6 +61,8 @@ static struct perf_event_ops event_ops = {
 	.exit	= event__process_task,
 	.fork	= event__process_task,
 	.lost	= event__process_lost,
+	.ordered_samples = true,
+	.ordering_requires_timestamps = true,
 };
 
 static void perf_session__insert_hist_entry_by_name(struct rb_root *root,
@@ -141,8 +144,8 @@ static int __cmd_diff(void)
 	int ret, i;
 	struct perf_session *session[2];
 
-	session[0] = perf_session__new(input_old, O_RDONLY, force, false);
-	session[1] = perf_session__new(input_new, O_RDONLY, force, false);
+	session[0] = perf_session__new(input_old, O_RDONLY, force, false, &event_ops);
+	session[1] = perf_session__new(input_new, O_RDONLY, force, false, &event_ops);
 	if (session[0] == NULL || session[1] == NULL)
 		return -ENOMEM;
 
@@ -173,7 +176,7 @@ static const char * const diff_usage[] = {
 static const struct option options[] = {
 	OPT_INCR('v', "verbose", &verbose,
 		    "be more verbose (show symbol address, etc)"),
-	OPT_BOOLEAN('m', "displacement", &show_displacement,
+	OPT_BOOLEAN('M', "displacement", &show_displacement,
 		    "Show position displacement relative to baseline"),
 	OPT_BOOLEAN('D', "dump-raw-trace", &dump_trace,
 		    "dump raw trace in ASCII"),
@@ -191,6 +194,8 @@ static const struct option options[] = {
 	OPT_STRING('t', "field-separator", &symbol_conf.field_sep, "separator",
 		   "separator for columns, no spaces will be added between "
 		   "columns '.' is reserved."),
+	OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
+		    "Look for files with symbols relative to this directory"),
 	OPT_END()
 };
 
diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
index 8e3e47b064c..0c78ffa7bf6 100644
--- a/tools/perf/builtin-inject.c
+++ b/tools/perf/builtin-inject.c
@@ -16,8 +16,8 @@
 static char		const *input_name = "-";
 static bool		inject_build_ids;
 
-static int event__repipe(event_t *event __used,
-			 struct perf_session *session __used)
+static int event__repipe_synth(event_t *event,
+			       struct perf_session *session __used)
 {
 	uint32_t size;
 	void *buf = event;
@@ -36,22 +36,30 @@ static int event__repipe(event_t *event __used,
 	return 0;
 }
 
-static int event__repipe_mmap(event_t *self, struct perf_session *session)
+static int event__repipe(event_t *event, struct sample_data *sample __used,
+			 struct perf_session *session)
+{
+	return event__repipe_synth(event, session);
+}
+
+static int event__repipe_mmap(event_t *self, struct sample_data *sample,
+			      struct perf_session *session)
 {
 	int err;
 
-	err = event__process_mmap(self, session);
-	event__repipe(self, session);
+	err = event__process_mmap(self, sample, session);
+	event__repipe(self, sample, session);
 
 	return err;
 }
 
-static int event__repipe_task(event_t *self, struct perf_session *session)
+static int event__repipe_task(event_t *self, struct sample_data *sample,
+			      struct perf_session *session)
 {
 	int err;
 
-	err = event__process_task(self, session);
-	event__repipe(self, session);
+	err = event__process_task(self, sample, session);
+	event__repipe(self, sample, session);
 
 	return err;
 }
@@ -61,7 +69,7 @@ static int event__repipe_tracing_data(event_t *self,
 {
 	int err;
 
-	event__repipe(self, session);
+	event__repipe_synth(self, session);
 	err = event__process_tracing_data(self, session);
 
 	return err;
@@ -111,7 +119,8 @@ static int dso__inject_build_id(struct dso *self, struct perf_session *session)
 	return 0;
 }
 
-static int event__inject_buildid(event_t *event, struct perf_session *session)
+static int event__inject_buildid(event_t *event, struct sample_data *sample,
+				 struct perf_session *session)
 {
 	struct addr_location al;
 	struct thread *thread;
@@ -146,7 +155,7 @@ static int event__inject_buildid(event_t *event, struct perf_session *session)
 	}
 
 repipe:
-	event__repipe(event, session);
+	event__repipe(event, sample, session);
 	return 0;
 }
 
@@ -160,10 +169,10 @@ struct perf_event_ops inject_ops = {
 	.read		= event__repipe,
 	.throttle	= event__repipe,
 	.unthrottle	= event__repipe,
-	.attr		= event__repipe,
-	.event_type 	= event__repipe,
-	.tracing_data 	= event__repipe,
-	.build_id 	= event__repipe,
+	.attr		= event__repipe_synth,
+	.event_type 	= event__repipe_synth,
+	.tracing_data 	= event__repipe_synth,
+	.build_id 	= event__repipe_synth,
 };
 
 extern volatile int session_done;
@@ -187,7 +196,7 @@ static int __cmd_inject(void)
 		inject_ops.tracing_data	= event__repipe_tracing_data;
 	}
 
-	session = perf_session__new(input_name, O_RDONLY, false, true);
+	session = perf_session__new(input_name, O_RDONLY, false, true, &inject_ops);
 	if (session == NULL)
 		return -ENOMEM;
 
diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
index 31f60a2535e..def7ddc2fd4 100644
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -304,22 +304,11 @@ process_raw_event(event_t *raw_event __used, void *data,
 	}
 }
 
-static int process_sample_event(event_t *event, struct perf_session *session)
+static int process_sample_event(event_t *event, struct sample_data *sample,
+				struct perf_session *session)
 {
-	struct sample_data data;
-	struct thread *thread;
+	struct thread *thread = perf_session__findnew(session, event->ip.pid);
 
-	memset(&data, 0, sizeof(data));
-	data.time = -1;
-	data.cpu = -1;
-	data.period = 1;
-
-	event__parse_sample(event, session->sample_type, &data);
-
-	dump_printf("(IP, %d): %d/%d: %#Lx period: %Ld\n", event->header.misc,
-		    data.pid, data.tid, data.ip, data.period);
-
-	thread = perf_session__findnew(session, event->ip.pid);
 	if (thread == NULL) {
 		pr_debug("problem processing %d event, skipping it.\n",
 			 event->header.type);
@@ -328,8 +317,8 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 
 	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
 
-	process_raw_event(event, data.raw_data, data.cpu,
-			  data.time, thread);
+	process_raw_event(event, sample->raw_data, sample->cpu,
+			  sample->time, thread);
 
 	return 0;
 }
@@ -492,7 +481,8 @@ static void sort_result(void)
 static int __cmd_kmem(void)
 {
 	int err = -EINVAL;
-	struct perf_session *session = perf_session__new(input_name, O_RDONLY, 0, false);
+	struct perf_session *session = perf_session__new(input_name, O_RDONLY,
+							 0, false, &event_ops);
 	if (session == NULL)
 		return -ENOMEM;
 
@@ -747,6 +737,9 @@ static int __cmd_record(int argc, const char **argv)
 	rec_argc = ARRAY_SIZE(record_args) + argc - 1;
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 
+	if (rec_argv == NULL)
+		return -ENOMEM;
+
 	for (i = 0; i < ARRAY_SIZE(record_args); i++)
 		rec_argv[i] = strdup(record_args[i]);
 
diff --git a/tools/perf/builtin-lock.c b/tools/perf/builtin-lock.c
index 821c1586a22..b9c6e543297 100644
--- a/tools/perf/builtin-lock.c
+++ b/tools/perf/builtin-lock.c
@@ -834,22 +834,18 @@ static void dump_info(void)
 		die("Unknown type of information\n");
 }
 
-static int process_sample_event(event_t *self, struct perf_session *s)
+static int process_sample_event(event_t *self, struct sample_data *sample,
+				struct perf_session *s)
 {
-	struct sample_data data;
-	struct thread *thread;
+	struct thread *thread = perf_session__findnew(s, sample->tid);
 
-	bzero(&data, sizeof(data));
-	event__parse_sample(self, s->sample_type, &data);
-
-	thread = perf_session__findnew(s, data.tid);
 	if (thread == NULL) {
 		pr_debug("problem processing %d event, skipping it.\n",
 			self->header.type);
 		return -1;
 	}
 
-	process_raw_event(data.raw_data, data.cpu, data.time, thread);
+	process_raw_event(sample->raw_data, sample->cpu, sample->time, thread);
 
 	return 0;
 }
@@ -862,7 +858,7 @@ static struct perf_event_ops eops = {
 
 static int read_events(void)
 {
-	session = perf_session__new(input_name, O_RDONLY, 0, false);
+	session = perf_session__new(input_name, O_RDONLY, 0, false, &eops);
 	if (!session)
 		die("Initializing perf session failed\n");
 
@@ -947,6 +943,9 @@ static int __cmd_record(int argc, const char **argv)
 	rec_argc = ARRAY_SIZE(record_args) + argc - 1;
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 
+	if (rec_argv == NULL)
+		return -ENOMEM;
+
 	for (i = 0; i < ARRAY_SIZE(record_args); i++)
 		rec_argv[i] = strdup(record_args[i]);
 
@@ -982,9 +981,9 @@ int cmd_lock(int argc, const char **argv, const char *prefix __used)
 				usage_with_options(report_usage, report_options);
 		}
 		__cmd_report();
-	} else if (!strcmp(argv[0], "trace")) {
-		/* Aliased to 'perf trace' */
-		return cmd_trace(argc, argv, prefix);
+	} else if (!strcmp(argv[0], "script")) {
+		/* Aliased to 'perf script' */
+		return cmd_script(argc, argv, prefix);
 	} else if (!strcmp(argv[0], "info")) {
 		if (argc) {
 			argc = parse_options(argc, argv,
diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
index 2e000c068cc..add163c9f0e 100644
--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -249,6 +249,11 @@ int cmd_probe(int argc, const char **argv, const char *prefix __used)
 	     !params.show_lines))
 		usage_with_options(probe_usage, options);
 
+	/*
+	 * Only consider the user's kernel image path if given.
+	 */
+	symbol_conf.try_vmlinux_path = (symbol_conf.vmlinux_name == NULL);
+
 	if (params.list_events) {
 		if (params.mod_events) {
 			pr_err("  Error: Don't use --list with --add/--del.\n");
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 4e75583ddd6..7bc04903548 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -18,6 +18,7 @@
 
 #include "util/header.h"
 #include "util/event.h"
+#include "util/evsel.h"
 #include "util/debug.h"
 #include "util/session.h"
 #include "util/symbol.h"
@@ -27,17 +28,18 @@
 #include <sched.h>
 #include <sys/mman.h>
 
+#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
+
 enum write_mode_t {
 	WRITE_FORCE,
 	WRITE_APPEND
 };
 
-static int			*fd[MAX_NR_CPUS][MAX_COUNTERS];
-
 static u64			user_interval			= ULLONG_MAX;
 static u64			default_interval		=      0;
+static u64			sample_type;
 
-static int			nr_cpus				=      0;
+static struct cpu_map		*cpus;
 static unsigned int		page_size;
 static unsigned int		mmap_pages			=    128;
 static unsigned int		user_freq 			= UINT_MAX;
@@ -48,11 +50,11 @@ static const char		*output_name			= "perf.data";
 static int			group				=      0;
 static int			realtime_prio			=      0;
 static bool			raw_samples			=  false;
+static bool			sample_id_all_avail		=   true;
 static bool			system_wide			=  false;
 static pid_t			target_pid			=     -1;
 static pid_t			target_tid			=     -1;
-static pid_t			*all_tids			=      NULL;
-static int			thread_num			=      0;
+static struct thread_map	*threads;
 static pid_t			child_pid			=     -1;
 static bool			no_inherit			=  false;
 static enum write_mode_t	write_mode			= WRITE_FORCE;
@@ -60,7 +62,9 @@ static bool			call_graph			=  false;
 static bool			inherit_stat			=  false;
 static bool			no_samples			=  false;
 static bool			sample_address			=  false;
+static bool			sample_time			=  false;
 static bool			no_buildid			=  false;
+static bool			no_buildid_cache		=  false;
 
 static long			samples				=      0;
 static u64			bytes_written			=      0;
@@ -77,7 +81,6 @@ static struct perf_session	*session;
 static const char		*cpu_list;
 
 struct mmap_data {
-	int			counter;
 	void			*base;
 	unsigned int		mask;
 	unsigned int		prev;
@@ -128,6 +131,7 @@ static void write_output(void *buf, size_t size)
 }
 
 static int process_synthesized_event(event_t *event,
+				     struct sample_data *sample __used,
 				     struct perf_session *self __used)
 {
 	write_output(event, event->header.size);
@@ -197,7 +201,7 @@ static void sig_atexit(void)
 	if (child_pid > 0)
 		kill(child_pid, SIGTERM);
 
-	if (signr == -1)
+	if (signr == -1 || signr == SIGUSR1)
 		return;
 
 	signal(signr, SIG_DFL);
@@ -224,12 +228,12 @@ static struct perf_header_attr *get_header_attr(struct perf_event_attr *a, int n
 	return h_attr;
 }
 
-static void create_counter(int counter, int cpu)
+static void create_counter(struct perf_evsel *evsel, int cpu)
 {
-	char *filter = filters[counter];
-	struct perf_event_attr *attr = attrs + counter;
+	char *filter = evsel->filter;
+	struct perf_event_attr *attr = &evsel->attr;
 	struct perf_header_attr *h_attr;
-	int track = !counter; /* only the first counter needs these */
+	int track = !evsel->idx; /* only the first counter needs these */
 	int thread_index;
 	int ret;
 	struct {
@@ -238,6 +242,19 @@ static void create_counter(int counter, int cpu)
 		u64 time_running;
 		u64 id;
 	} read_data;
+	/*
+ 	 * Check if parse_single_tracepoint_event has already asked for
+ 	 * PERF_SAMPLE_TIME.
+ 	 *
+	 * XXX this is kludgy but short term fix for problems introduced by
+	 * eac23d1c that broke 'perf script' by having different sample_types
+	 * when using multiple tracepoint events when we use a perf binary
+	 * that tries to use sample_id_all on an older kernel.
+ 	 *
+ 	 * We need to move counter creation to perf_session, support
+ 	 * different sample_types, etc.
+ 	 */
+	bool time_needed = attr->sample_type & PERF_SAMPLE_TIME;
 
 	attr->read_format	= PERF_FORMAT_TOTAL_TIME_ENABLED |
 				  PERF_FORMAT_TOTAL_TIME_RUNNING |
@@ -280,6 +297,10 @@ static void create_counter(int counter, int cpu)
 	if (system_wide)
 		attr->sample_type	|= PERF_SAMPLE_CPU;
 
+	if (sample_id_all_avail &&
+	    (sample_time || system_wide || !no_inherit || cpu_list))
+		attr->sample_type	|= PERF_SAMPLE_TIME;
+
 	if (raw_samples) {
 		attr->sample_type	|= PERF_SAMPLE_TIME;
 		attr->sample_type	|= PERF_SAMPLE_RAW;
@@ -293,13 +314,14 @@ static void create_counter(int counter, int cpu)
 		attr->disabled = 1;
 		attr->enable_on_exec = 1;
 	}
+retry_sample_id:
+	attr->sample_id_all = sample_id_all_avail ? 1 : 0;
 
-	for (thread_index = 0; thread_index < thread_num; thread_index++) {
+	for (thread_index = 0; thread_index < threads->nr; thread_index++) {
 try_again:
-		fd[nr_cpu][counter][thread_index] = sys_perf_event_open(attr,
-				all_tids[thread_index], cpu, group_fd, 0);
+		FD(evsel, nr_cpu, thread_index) = sys_perf_event_open(attr, threads->map[thread_index], cpu, group_fd, 0);
 
-		if (fd[nr_cpu][counter][thread_index] < 0) {
+		if (FD(evsel, nr_cpu, thread_index) < 0) {
 			int err = errno;
 
 			if (err == EPERM || err == EACCES)
@@ -309,6 +331,15 @@ try_again:
 			else if (err ==  ENODEV && cpu_list) {
 				die("No such device - did you specify"
 					" an out-of-range profile CPU?\n");
+			} else if (err == EINVAL && sample_id_all_avail) {
+				/*
+				 * Old kernel, no attr->sample_id_type_all field
+				 */
+				sample_id_all_avail = false;
+				if (!sample_time && !raw_samples && !time_needed)
+					attr->sample_type &= ~PERF_SAMPLE_TIME;
+
+				goto retry_sample_id;
 			}
 
 			/*
@@ -326,8 +357,8 @@ try_again:
 				goto try_again;
 			}
 			printf("\n");
-			error("perfcounter syscall returned with %d (%s)\n",
-					fd[nr_cpu][counter][thread_index], strerror(err));
+			error("sys_perf_event_open() syscall returned with %d (%s).  /bin/dmesg may provide additional information.\n",
+			      FD(evsel, nr_cpu, thread_index), strerror(err));
 
 #if defined(__i386__) || defined(__x86_64__)
 			if (attr->type == PERF_TYPE_HARDWARE && err == EOPNOTSUPP)
@@ -341,7 +372,7 @@ try_again:
 			exit(-1);
 		}
 
-		h_attr = get_header_attr(attr, counter);
+		h_attr = get_header_attr(attr, evsel->idx);
 		if (h_attr == NULL)
 			die("nomem\n");
 
@@ -352,7 +383,7 @@ try_again:
 			}
 		}
 
-		if (read(fd[nr_cpu][counter][thread_index], &read_data, sizeof(read_data)) == -1) {
+		if (read(FD(evsel, nr_cpu, thread_index), &read_data, sizeof(read_data)) == -1) {
 			perror("Unable to read perf file descriptor");
 			exit(-1);
 		}
@@ -362,43 +393,44 @@ try_again:
 			exit(-1);
 		}
 
-		assert(fd[nr_cpu][counter][thread_index] >= 0);
-		fcntl(fd[nr_cpu][counter][thread_index], F_SETFL, O_NONBLOCK);
+		assert(FD(evsel, nr_cpu, thread_index) >= 0);
+		fcntl(FD(evsel, nr_cpu, thread_index), F_SETFL, O_NONBLOCK);
 
 		/*
 		 * First counter acts as the group leader:
 		 */
 		if (group && group_fd == -1)
-			group_fd = fd[nr_cpu][counter][thread_index];
-
-		if (counter || thread_index) {
-			ret = ioctl(fd[nr_cpu][counter][thread_index],
-					PERF_EVENT_IOC_SET_OUTPUT,
-					fd[nr_cpu][0][0]);
+			group_fd = FD(evsel, nr_cpu, thread_index);
+
+		if (evsel->idx || thread_index) {
+			struct perf_evsel *first;
+			first = list_entry(evsel_list.next, struct perf_evsel, node);
+			ret = ioctl(FD(evsel, nr_cpu, thread_index),
+				    PERF_EVENT_IOC_SET_OUTPUT,
+				    FD(first, nr_cpu, 0));
 			if (ret) {
 				error("failed to set output: %d (%s)\n", errno,
 						strerror(errno));
 				exit(-1);
 			}
 		} else {
-			mmap_array[nr_cpu].counter = counter;
 			mmap_array[nr_cpu].prev = 0;
 			mmap_array[nr_cpu].mask = mmap_pages*page_size - 1;
 			mmap_array[nr_cpu].base = mmap(NULL, (mmap_pages+1)*page_size,
-				PROT_READ|PROT_WRITE, MAP_SHARED, fd[nr_cpu][counter][thread_index], 0);
+				PROT_READ | PROT_WRITE, MAP_SHARED, FD(evsel, nr_cpu, thread_index), 0);
 			if (mmap_array[nr_cpu].base == MAP_FAILED) {
 				error("failed to mmap with %d (%s)\n", errno, strerror(errno));
 				exit(-1);
 			}
 
-			event_array[nr_poll].fd = fd[nr_cpu][counter][thread_index];
+			event_array[nr_poll].fd = FD(evsel, nr_cpu, thread_index);
 			event_array[nr_poll].events = POLLIN;
 			nr_poll++;
 		}
 
 		if (filter != NULL) {
-			ret = ioctl(fd[nr_cpu][counter][thread_index],
-					PERF_EVENT_IOC_SET_FILTER, filter);
+			ret = ioctl(FD(evsel, nr_cpu, thread_index),
+				    PERF_EVENT_IOC_SET_FILTER, filter);
 			if (ret) {
 				error("failed to set filter with %d (%s)\n", errno,
 						strerror(errno));
@@ -406,15 +438,19 @@ try_again:
 			}
 		}
 	}
+
+	if (!sample_type)
+		sample_type = attr->sample_type;
 }
 
 static void open_counters(int cpu)
 {
-	int counter;
+	struct perf_evsel *pos;
 
 	group_fd = -1;
-	for (counter = 0; counter < nr_counters; counter++)
-		create_counter(counter, cpu);
+
+	list_for_each_entry(pos, &evsel_list, node)
+		create_counter(pos, cpu);
 
 	nr_cpu++;
 }
@@ -437,7 +473,8 @@ static void atexit_header(void)
 	if (!pipe_output) {
 		session->header.data_size += bytes_written;
 
-		process_buildids();
+		if (!no_buildid)
+			process_buildids();
 		perf_header__write(&session->header, output, true);
 		perf_session__delete(session);
 		symbol__exit();
@@ -500,7 +537,7 @@ static void mmap_read_all(void)
 
 static int __cmd_record(int argc, const char **argv)
 {
-	int i, counter;
+	int i;
 	struct stat st;
 	int flags;
 	int err;
@@ -515,6 +552,7 @@ static int __cmd_record(int argc, const char **argv)
 	atexit(sig_atexit);
 	signal(SIGCHLD, sig_handler);
 	signal(SIGINT, sig_handler);
+	signal(SIGUSR1, sig_handler);
 
 	if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) {
 		perror("failed to create pipes");
@@ -551,19 +589,22 @@ static int __cmd_record(int argc, const char **argv)
 	}
 
 	session = perf_session__new(output_name, O_WRONLY,
-				    write_mode == WRITE_FORCE, false);
+				    write_mode == WRITE_FORCE, false, NULL);
 	if (session == NULL) {
 		pr_err("Not enough memory for reading perf file header\n");
 		return -1;
 	}
 
+	if (!no_buildid)
+		perf_header__set_feat(&session->header, HEADER_BUILD_ID);
+
 	if (!file_new) {
 		err = perf_header__read(session, output);
 		if (err < 0)
 			goto out_delete_session;
 	}
 
-	if (have_tracepoints(attrs, nr_counters))
+	if (have_tracepoints(&evsel_list))
 		perf_header__set_feat(&session->header, HEADER_TRACE_INFO);
 
 	/*
@@ -606,11 +647,12 @@ static int __cmd_record(int argc, const char **argv)
 			execvp(argv[0], (char **)argv);
 
 			perror(argv[0]);
+			kill(getppid(), SIGUSR1);
 			exit(-1);
 		}
 
 		if (!system_wide && target_tid == -1 && target_pid == -1)
-			all_tids[0] = child_pid;
+			threads->map[0] = child_pid;
 
 		close(child_ready_pipe[1]);
 		close(go_pipe[0]);
@@ -624,19 +666,15 @@ static int __cmd_record(int argc, const char **argv)
 		close(child_ready_pipe[0]);
 	}
 
-	nr_cpus = read_cpu_map(cpu_list);
-	if (nr_cpus < 1) {
-		perror("failed to collect number of CPUs");
-		return -1;
-	}
-
 	if (!system_wide && no_inherit && !cpu_list) {
 		open_counters(-1);
 	} else {
-		for (i = 0; i < nr_cpus; i++)
-			open_counters(cpumap[i]);
+		for (i = 0; i < cpus->nr; i++)
+			open_counters(cpus->map[i]);
 	}
 
+	perf_session__set_sample_type(session, sample_type);
+
 	if (pipe_output) {
 		err = perf_header__write_pipe(output);
 		if (err < 0)
@@ -649,6 +687,8 @@ static int __cmd_record(int argc, const char **argv)
 
 	post_processing_offset = lseek(output, 0, SEEK_CUR);
 
+	perf_session__set_sample_id_all(session, sample_id_all_avail);
+
 	if (pipe_output) {
 		err = event__synthesize_attrs(&session->header,
 					      process_synthesized_event,
@@ -665,7 +705,7 @@ static int __cmd_record(int argc, const char **argv)
 			return err;
 		}
 
-		if (have_tracepoints(attrs, nr_counters)) {
+		if (have_tracepoints(&evsel_list)) {
 			/*
 			 * FIXME err <= 0 here actually means that
 			 * there were no tracepoints so its not really
@@ -674,8 +714,7 @@ static int __cmd_record(int argc, const char **argv)
 			 * return this more properly and also
 			 * propagate errors that now are calling die()
 			 */
-			err = event__synthesize_tracing_data(output, attrs,
-							     nr_counters,
+			err = event__synthesize_tracing_data(output, &evsel_list,
 							     process_synthesized_event,
 							     session);
 			if (err <= 0) {
@@ -697,17 +736,18 @@ static int __cmd_record(int argc, const char **argv)
 	if (err < 0)
 		err = event__synthesize_kernel_mmap(process_synthesized_event,
 						    session, machine, "_stext");
-	if (err < 0) {
-		pr_err("Couldn't record kernel reference relocation symbol.\n");
-		return err;
-	}
+	if (err < 0)
+		pr_err("Couldn't record kernel reference relocation symbol\n"
+		       "Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
+		       "Check /proc/kallsyms permission or run as root.\n");
 
 	err = event__synthesize_modules(process_synthesized_event,
 					session, machine);
-	if (err < 0) {
-		pr_err("Couldn't record kernel reference relocation symbol.\n");
-		return err;
-	}
+	if (err < 0)
+		pr_err("Couldn't record kernel module information.\n"
+		       "Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
+		       "Check /proc/modules permission or run as root.\n");
+
 	if (perf_guest)
 		perf_session__process_machines(session, event__synthesize_guest_os);
 
@@ -748,20 +788,20 @@ static int __cmd_record(int argc, const char **argv)
 
 		if (done) {
 			for (i = 0; i < nr_cpu; i++) {
-				for (counter = 0;
-					counter < nr_counters;
-					counter++) {
+				struct perf_evsel *pos;
+
+				list_for_each_entry(pos, &evsel_list, node) {
 					for (thread = 0;
-						thread < thread_num;
+						thread < threads->nr;
 						thread++)
-						ioctl(fd[i][counter][thread],
+						ioctl(FD(pos, i, thread),
 							PERF_EVENT_IOC_DISABLE);
 				}
 			}
 		}
 	}
 
-	if (quiet)
+	if (quiet || signr == SIGUSR1)
 		return 0;
 
 	fprintf(stderr, "[ perf record: Woken up %ld times to write data ]\n", waking);
@@ -790,7 +830,7 @@ static const char * const record_usage[] = {
 
 static bool force, append_file;
 
-static const struct option options[] = {
+const struct option record_options[] = {
 	OPT_CALLBACK('e', "event", NULL, "event",
 		     "event selector. use 'perf list' to list available events",
 		     parse_events),
@@ -828,27 +868,31 @@ static const struct option options[] = {
 		    "per thread counts"),
 	OPT_BOOLEAN('d', "data", &sample_address,
 		    "Sample addresses"),
+	OPT_BOOLEAN('T', "timestamp", &sample_time, "Sample timestamps"),
 	OPT_BOOLEAN('n', "no-samples", &no_samples,
 		    "don't sample"),
-	OPT_BOOLEAN('N', "no-buildid-cache", &no_buildid,
+	OPT_BOOLEAN('N', "no-buildid-cache", &no_buildid_cache,
 		    "do not update the buildid cache"),
+	OPT_BOOLEAN('B', "no-buildid", &no_buildid,
+		    "do not collect buildids in perf.data"),
 	OPT_END()
 };
 
 int cmd_record(int argc, const char **argv, const char *prefix __used)
 {
-	int i, j, err = -ENOMEM;
+	int err = -ENOMEM;
+	struct perf_evsel *pos;
 
-	argc = parse_options(argc, argv, options, record_usage,
+	argc = parse_options(argc, argv, record_options, record_usage,
 			    PARSE_OPT_STOP_AT_NON_OPTION);
 	if (!argc && target_pid == -1 && target_tid == -1 &&
 		!system_wide && !cpu_list)
-		usage_with_options(record_usage, options);
+		usage_with_options(record_usage, record_options);
 
 	if (force && append_file) {
 		fprintf(stderr, "Can't overwrite and append at the same time."
 				" You need to choose between -f and -A");
-		usage_with_options(record_usage, options);
+		usage_with_options(record_usage, record_options);
 	} else if (append_file) {
 		write_mode = WRITE_APPEND;
 	} else {
@@ -856,41 +900,36 @@ int cmd_record(int argc, const char **argv, const char *prefix __used)
 	}
 
 	symbol__init();
-	if (no_buildid)
+
+	if (no_buildid_cache || no_buildid)
 		disable_buildid_cache();
 
-	if (!nr_counters) {
-		nr_counters	= 1;
-		attrs[0].type	= PERF_TYPE_HARDWARE;
-		attrs[0].config = PERF_COUNT_HW_CPU_CYCLES;
+	if (list_empty(&evsel_list) && perf_evsel_list__create_default() < 0) {
+		pr_err("Not enough memory for event selector list\n");
+		goto out_symbol_exit;
 	}
 
-	if (target_pid != -1) {
+	if (target_pid != -1)
 		target_tid = target_pid;
-		thread_num = find_all_tid(target_pid, &all_tids);
-		if (thread_num <= 0) {
-			fprintf(stderr, "Can't find all threads of pid %d\n",
-					target_pid);
-			usage_with_options(record_usage, options);
-		}
-	} else {
-		all_tids=malloc(sizeof(pid_t));
-		if (!all_tids)
-			goto out_symbol_exit;
 
-		all_tids[0] = target_tid;
-		thread_num = 1;
+	threads = thread_map__new(target_pid, target_tid);
+	if (threads == NULL) {
+		pr_err("Problems finding threads of monitor\n");
+		usage_with_options(record_usage, record_options);
 	}
 
-	for (i = 0; i < MAX_NR_CPUS; i++) {
-		for (j = 0; j < MAX_COUNTERS; j++) {
-			fd[i][j] = malloc(sizeof(int)*thread_num);
-			if (!fd[i][j])
-				goto out_free_fd;
-		}
+	cpus = cpu_map__new(cpu_list);
+	if (cpus == NULL) {
+		perror("failed to parse CPUs map");
+		return -1;
 	}
-	event_array = malloc(
-		sizeof(struct pollfd)*MAX_NR_CPUS*MAX_COUNTERS*thread_num);
+
+	list_for_each_entry(pos, &evsel_list, node) {
+		if (perf_evsel__alloc_fd(pos, cpus->nr, threads->nr) < 0)
+			goto out_free_fd;
+	}
+	event_array = malloc((sizeof(struct pollfd) * MAX_NR_CPUS *
+			      MAX_COUNTERS * threads->nr));
 	if (!event_array)
 		goto out_free_fd;
 
@@ -917,12 +956,8 @@ int cmd_record(int argc, const char **argv, const char *prefix __used)
 out_free_event_array:
 	free(event_array);
 out_free_fd:
-	for (i = 0; i < MAX_NR_CPUS; i++) {
-		for (j = 0; j < MAX_COUNTERS; j++)
-			free(fd[i][j]);
-	}
-	free(all_tids);
-	all_tids = NULL;
+	thread_map__delete(threads);
+	threads = NULL;
 out_symbol_exit:
 	symbol__exit();
 	return err;
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 5de405d4523..75183a4518e 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -150,13 +150,13 @@ static int add_event_total(struct perf_session *session,
 	return 0;
 }
 
-static int process_sample_event(event_t *event, struct perf_session *session)
+static int process_sample_event(event_t *event, struct sample_data *sample,
+				struct perf_session *session)
 {
-	struct sample_data data = { .period = 1, };
 	struct addr_location al;
 	struct perf_event_attr *attr;
 
-	if (event__preprocess_sample(event, session, &al, &data, NULL) < 0) {
+	if (event__preprocess_sample(event, session, &al, sample, NULL) < 0) {
 		fprintf(stderr, "problem processing %d event, skipping it.\n",
 			event->header.type);
 		return -1;
@@ -165,14 +165,14 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 	if (al.filtered || (hide_unresolved && al.sym == NULL))
 		return 0;
 
-	if (perf_session__add_hist_entry(session, &al, &data)) {
+	if (perf_session__add_hist_entry(session, &al, sample)) {
 		pr_debug("problem incrementing symbol period, skipping event\n");
 		return -1;
 	}
 
-	attr = perf_header__find_attr(data.id, &session->header);
+	attr = perf_header__find_attr(sample->id, &session->header);
 
-	if (add_event_total(session, &data, attr)) {
+	if (add_event_total(session, sample, attr)) {
 		pr_debug("problem adding event period\n");
 		return -1;
 	}
@@ -180,7 +180,8 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 	return 0;
 }
 
-static int process_read_event(event_t *event, struct perf_session *session __used)
+static int process_read_event(event_t *event, struct sample_data *sample __used,
+			      struct perf_session *session __used)
 {
 	struct perf_event_attr *attr;
 
@@ -243,6 +244,8 @@ static struct perf_event_ops event_ops = {
 	.event_type = event__process_event_type,
 	.tracing_data = event__process_tracing_data,
 	.build_id = event__process_build_id,
+	.ordered_samples = true,
+	.ordering_requires_timestamps = true,
 };
 
 extern volatile int session_done;
@@ -307,7 +310,7 @@ static int __cmd_report(void)
 
 	signal(SIGINT, sig_handler);
 
-	session = perf_session__new(input_name, O_RDONLY, force, false);
+	session = perf_session__new(input_name, O_RDONLY, force, false, &event_ops);
 	if (session == NULL)
 		return -ENOMEM;
 
@@ -442,6 +445,8 @@ static const struct option options[] = {
 		    "dump raw trace in ASCII"),
 	OPT_STRING('k', "vmlinux", &symbol_conf.vmlinux_name,
 		   "file", "vmlinux pathname"),
+	OPT_STRING(0, "kallsyms", &symbol_conf.kallsyms_name,
+		   "file", "kallsyms pathname"),
 	OPT_BOOLEAN('f', "force", &force, "don't complain, do it"),
 	OPT_BOOLEAN('m', "modules", &symbol_conf.use_modules,
 		    "load module symbols - WARNING: use only with -k and LIVE kernel"),
@@ -478,6 +483,8 @@ static const struct option options[] = {
 		   "columns '.' is reserved."),
 	OPT_BOOLEAN('U', "hide-unresolved", &hide_unresolved,
 		    "Only display entries resolved to a symbol"),
+	OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
+		    "Look for files with symbols relative to this directory"),
 	OPT_END()
 };
 
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index 55f3b5dcc73..7a4ebeb8b01 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -1606,25 +1606,15 @@ process_raw_event(event_t *raw_event __used, struct perf_session *session,
 		process_sched_migrate_task_event(data, session, event, cpu, timestamp, thread);
 }
 
-static int process_sample_event(event_t *event, struct perf_session *session)
+static int process_sample_event(event_t *event, struct sample_data *sample,
+				struct perf_session *session)
 {
-	struct sample_data data;
 	struct thread *thread;
 
 	if (!(session->sample_type & PERF_SAMPLE_RAW))
 		return 0;
 
-	memset(&data, 0, sizeof(data));
-	data.time = -1;
-	data.cpu = -1;
-	data.period = -1;
-
-	event__parse_sample(event, session->sample_type, &data);
-
-	dump_printf("(IP, %d): %d/%d: %#Lx period: %Ld\n", event->header.misc,
-		    data.pid, data.tid, data.ip, data.period);
-
-	thread = perf_session__findnew(session, data.pid);
+	thread = perf_session__findnew(session, sample->pid);
 	if (thread == NULL) {
 		pr_debug("problem processing %d event, skipping it.\n",
 			 event->header.type);
@@ -1633,10 +1623,11 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 
 	dump_printf(" ... thread: %s:%d\n", thread->comm, thread->pid);
 
-	if (profile_cpu != -1 && profile_cpu != (int)data.cpu)
+	if (profile_cpu != -1 && profile_cpu != (int)sample->cpu)
 		return 0;
 
-	process_raw_event(event, session, data.raw_data, data.cpu, data.time, thread);
+	process_raw_event(event, session, sample->raw_data, sample->cpu,
+			  sample->time, thread);
 
 	return 0;
 }
@@ -1652,7 +1643,8 @@ static struct perf_event_ops event_ops = {
 static int read_events(void)
 {
 	int err = -EINVAL;
-	struct perf_session *session = perf_session__new(input_name, O_RDONLY, 0, false);
+	struct perf_session *session = perf_session__new(input_name, O_RDONLY,
+							 0, false, &event_ops);
 	if (session == NULL)
 		return -ENOMEM;
 
@@ -1869,6 +1861,9 @@ static int __cmd_record(int argc, const char **argv)
 	rec_argc = ARRAY_SIZE(record_args) + argc - 1;
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 
+	if (rec_argv)
+		return -ENOMEM;
+
 	for (i = 0; i < ARRAY_SIZE(record_args); i++)
 		rec_argv[i] = strdup(record_args[i]);
 
@@ -1888,10 +1883,10 @@ int cmd_sched(int argc, const char **argv, const char *prefix __used)
 		usage_with_options(sched_usage, sched_options);
 
 	/*
-	 * Aliased to 'perf trace' for now:
+	 * Aliased to 'perf script' for now:
 	 */
-	if (!strcmp(argv[0], "trace"))
-		return cmd_trace(argc, argv, prefix);
+	if (!strcmp(argv[0], "script"))
+		return cmd_script(argc, argv, prefix);
 
 	symbol__init();
 	if (!strncmp(argv[0], "rec", 3)) {
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-script.c
index 2f8df45c4dc..150a606002e 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-script.c
@@ -10,6 +10,7 @@
 #include "util/symbol.h"
 #include "util/thread.h"
 #include "util/trace-event.h"
+#include "util/parse-options.h"
 #include "util/util.h"
 
 static char const		*script_name;
@@ -17,6 +18,7 @@ static char const		*generate_script_lang;
 static bool			debug_mode;
 static u64			last_timestamp;
 static u64			nr_unordered;
+extern const struct option	record_options[];
 
 static int default_start_script(const char *script __unused,
 				int argc __unused,
@@ -54,29 +56,18 @@ static void setup_scripting(void)
 
 static int cleanup_scripting(void)
 {
-	pr_debug("\nperf trace script stopped\n");
+	pr_debug("\nperf script stopped\n");
 
 	return scripting_ops->stop_script();
 }
 
 static char const		*input_name = "perf.data";
 
-static int process_sample_event(event_t *event, struct perf_session *session)
+static int process_sample_event(event_t *event, struct sample_data *sample,
+				struct perf_session *session)
 {
-	struct sample_data data;
-	struct thread *thread;
-
-	memset(&data, 0, sizeof(data));
-	data.time = -1;
-	data.cpu = -1;
-	data.period = 1;
-
-	event__parse_sample(event, session->sample_type, &data);
-
-	dump_printf("(IP, %d): %d/%d: %#Lx period: %Ld\n", event->header.misc,
-		    data.pid, data.tid, data.ip, data.period);
+	struct thread *thread = perf_session__findnew(session, event->ip.pid);
 
-	thread = perf_session__findnew(session, event->ip.pid);
 	if (thread == NULL) {
 		pr_debug("problem processing %d event, skipping it.\n",
 			 event->header.type);
@@ -85,13 +76,13 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 
 	if (session->sample_type & PERF_SAMPLE_RAW) {
 		if (debug_mode) {
-			if (data.time < last_timestamp) {
+			if (sample->time < last_timestamp) {
 				pr_err("Samples misordered, previous: %llu "
 					"this: %llu\n", last_timestamp,
-					data.time);
+					sample->time);
 				nr_unordered++;
 			}
-			last_timestamp = data.time;
+			last_timestamp = sample->time;
 			return 0;
 		}
 		/*
@@ -99,21 +90,12 @@ static int process_sample_event(event_t *event, struct perf_session *session)
 		 * field, although it should be the same than this perf
 		 * event pid
 		 */
-		scripting_ops->process_event(data.cpu, data.raw_data,
-					     data.raw_size,
-					     data.time, thread->comm);
+		scripting_ops->process_event(sample->cpu, sample->raw_data,
+					     sample->raw_size,
+					     sample->time, thread->comm);
 	}
 
-	session->hists.stats.total_period += data.period;
-	return 0;
-}
-
-static u64 nr_lost;
-
-static int process_lost_event(event_t *event, struct perf_session *session __used)
-{
-	nr_lost += event->lost.lost;
-
+	session->hists.stats.total_period += sample->period;
 	return 0;
 }
 
@@ -124,7 +106,7 @@ static struct perf_event_ops event_ops = {
 	.event_type = event__process_event_type,
 	.tracing_data = event__process_tracing_data,
 	.build_id = event__process_build_id,
-	.lost = process_lost_event,
+	.ordering_requires_timestamps = true,
 	.ordered_samples = true,
 };
 
@@ -135,7 +117,7 @@ static void sig_handler(int sig __unused)
 	session_done = 1;
 }
 
-static int __cmd_trace(struct perf_session *session)
+static int __cmd_script(struct perf_session *session)
 {
 	int ret;
 
@@ -143,10 +125,8 @@ static int __cmd_trace(struct perf_session *session)
 
 	ret = perf_session__process_events(session, &event_ops);
 
-	if (debug_mode) {
+	if (debug_mode)
 		pr_err("Misordered timestamps: %llu\n", nr_unordered);
-		pr_err("Lost events: %llu\n", nr_lost);
-	}
 
 	return ret;
 }
@@ -157,7 +137,7 @@ struct script_spec {
 	char			spec[0];
 };
 
-LIST_HEAD(script_specs);
+static LIST_HEAD(script_specs);
 
 static struct script_spec *script_spec__new(const char *spec,
 					    struct scripting_ops *ops)
@@ -245,7 +225,7 @@ static void list_available_languages(void)
 
 	fprintf(stderr, "\n");
 	fprintf(stderr, "Scripting language extensions (used in "
-		"perf trace -s [spec:]script.[spec]):\n\n");
+		"perf script -s [spec:]script.[spec]):\n\n");
 
 	list_for_each_entry(s, &script_specs, node)
 		fprintf(stderr, "  %-42s [%s]\n", s->spec, s->ops->name);
@@ -299,17 +279,34 @@ static int parse_scriptname(const struct option *opt __used,
 	return 0;
 }
 
-#define for_each_lang(scripts_dir, lang_dirent, lang_next)		\
+/* Helper function for filesystems that return a dent->d_type DT_UNKNOWN */
+static int is_directory(const char *base_path, const struct dirent *dent)
+{
+	char path[PATH_MAX];
+	struct stat st;
+
+	sprintf(path, "%s/%s", base_path, dent->d_name);
+	if (stat(path, &st))
+		return 0;
+
+	return S_ISDIR(st.st_mode);
+}
+
+#define for_each_lang(scripts_path, scripts_dir, lang_dirent, lang_next)\
 	while (!readdir_r(scripts_dir, &lang_dirent, &lang_next) &&	\
 	       lang_next)						\
-		if (lang_dirent.d_type == DT_DIR &&			\
+		if ((lang_dirent.d_type == DT_DIR ||			\
+		     (lang_dirent.d_type == DT_UNKNOWN &&		\
+		      is_directory(scripts_path, &lang_dirent))) &&	\
 		    (strcmp(lang_dirent.d_name, ".")) &&		\
 		    (strcmp(lang_dirent.d_name, "..")))
 
-#define for_each_script(lang_dir, script_dirent, script_next)		\
+#define for_each_script(lang_path, lang_dir, script_dirent, script_next)\
 	while (!readdir_r(lang_dir, &script_dirent, &script_next) &&	\
 	       script_next)						\
-		if (script_dirent.d_type != DT_DIR)
+		if (script_dirent.d_type != DT_DIR &&			\
+		    (script_dirent.d_type != DT_UNKNOWN ||		\
+		     !is_directory(lang_path, &script_dirent)))
 
 
 #define RECORD_SUFFIX			"-record"
@@ -322,13 +319,13 @@ struct script_desc {
 	char			*args;
 };
 
-LIST_HEAD(script_descs);
+static LIST_HEAD(script_descs);
 
 static struct script_desc *script_desc__new(const char *name)
 {
 	struct script_desc *s = zalloc(sizeof(*s));
 
-	if (s != NULL)
+	if (s != NULL && name)
 		s->name = strdup(name);
 
 	return s;
@@ -337,6 +334,8 @@ static struct script_desc *script_desc__new(const char *name)
 static void script_desc__delete(struct script_desc *s)
 {
 	free(s->name);
+	free(s->half_liner);
+	free(s->args);
 	free(s);
 }
 
@@ -376,10 +375,10 @@ out_delete_desc:
 	return NULL;
 }
 
-static char *ends_with(char *str, const char *suffix)
+static const char *ends_with(const char *str, const char *suffix)
 {
 	size_t suffix_len = strlen(suffix);
-	char *p = str;
+	const char *p = str;
 
 	if (strlen(str) > suffix_len) {
 		p = str + strlen(str) - suffix_len;
@@ -462,16 +461,16 @@ static int list_available_scripts(const struct option *opt __used,
 	if (!scripts_dir)
 		return -1;
 
-	for_each_lang(scripts_dir, lang_dirent, lang_next) {
+	for_each_lang(scripts_path, scripts_dir, lang_dirent, lang_next) {
 		snprintf(lang_path, MAXPATHLEN, "%s/%s/bin", scripts_path,
 			 lang_dirent.d_name);
 		lang_dir = opendir(lang_path);
 		if (!lang_dir)
 			continue;
 
-		for_each_script(lang_dir, script_dirent, script_next) {
+		for_each_script(lang_path, lang_dir, script_dirent, script_next) {
 			script_root = strdup(script_dirent.d_name);
-			str = ends_with(script_root, REPORT_SUFFIX);
+			str = (char *)ends_with(script_root, REPORT_SUFFIX);
 			if (str) {
 				*str = '\0';
 				desc = script_desc__findnew(script_root);
@@ -510,16 +509,16 @@ static char *get_script_path(const char *script_root, const char *suffix)
 	if (!scripts_dir)
 		return NULL;
 
-	for_each_lang(scripts_dir, lang_dirent, lang_next) {
+	for_each_lang(scripts_path, scripts_dir, lang_dirent, lang_next) {
 		snprintf(lang_path, MAXPATHLEN, "%s/%s/bin", scripts_path,
 			 lang_dirent.d_name);
 		lang_dir = opendir(lang_path);
 		if (!lang_dir)
 			continue;
 
-		for_each_script(lang_dir, script_dirent, script_next) {
+		for_each_script(lang_path, lang_dir, script_dirent, script_next) {
 			__script_root = strdup(script_dirent.d_name);
-			str = ends_with(__script_root, suffix);
+			str = (char *)ends_with(__script_root, suffix);
 			if (str) {
 				*str = '\0';
 				if (strcmp(__script_root, script_root))
@@ -537,8 +536,40 @@ static char *get_script_path(const char *script_root, const char *suffix)
 	return path;
 }
 
-static const char * const trace_usage[] = {
-	"perf trace [<options>] <command>",
+static bool is_top_script(const char *script_path)
+{
+	return ends_with(script_path, "top") == NULL ? false : true;
+}
+
+static int has_required_arg(char *script_path)
+{
+	struct script_desc *desc;
+	int n_args = 0;
+	char *p;
+
+	desc = script_desc__new(NULL);
+
+	if (read_script_info(desc, script_path))
+		goto out;
+
+	if (!desc->args)
+		goto out;
+
+	for (p = desc->args; *p; p++)
+		if (*p == '<')
+			n_args++;
+out:
+	script_desc__delete(desc);
+
+	return n_args;
+}
+
+static const char * const script_usage[] = {
+	"perf script [<options>]",
+	"perf script [<options>] record <script> [<record-options>] <command>",
+	"perf script [<options>] report <script> [script-args]",
+	"perf script [<options>] <script> [<record-options>] <command>",
+	"perf script [<options>] <top-script> [script-args]",
 	NULL
 };
 
@@ -555,7 +586,7 @@ static const struct option options[] = {
 		     "script file name (lang:script name, script name, or *)",
 		     parse_scriptname),
 	OPT_STRING('g', "gen-script", &generate_script_lang, "lang",
-		   "generate perf-trace.xx script in specified language"),
+		   "generate perf-script.xx script in specified language"),
 	OPT_STRING('i', "input", &input_name, "file",
 		    "input file name"),
 	OPT_BOOLEAN('d', "debug-mode", &debug_mode,
@@ -564,50 +595,81 @@ static const struct option options[] = {
 	OPT_END()
 };
 
-int cmd_trace(int argc, const char **argv, const char *prefix __used)
+static bool have_cmd(int argc, const char **argv)
+{
+	char **__argv = malloc(sizeof(const char *) * argc);
+
+	if (!__argv)
+		die("malloc");
+	memcpy(__argv, argv, sizeof(const char *) * argc);
+	argc = parse_options(argc, (const char **)__argv, record_options,
+			     NULL, PARSE_OPT_STOP_AT_NON_OPTION);
+	free(__argv);
+
+	return argc != 0;
+}
+
+int cmd_script(int argc, const char **argv, const char *prefix __used)
 {
+	char *rec_script_path = NULL;
+	char *rep_script_path = NULL;
 	struct perf_session *session;
-	const char *suffix = NULL;
+	char *script_path = NULL;
 	const char **__argv;
-	char *script_path;
-	int i, err;
+	bool system_wide;
+	int i, j, err;
 
-	if (argc >= 2 && strncmp(argv[1], "rec", strlen("rec")) == 0) {
-		if (argc < 3) {
-			fprintf(stderr,
-				"Please specify a record script\n");
-			return -1;
-		}
-		suffix = RECORD_SUFFIX;
+	setup_scripting();
+
+	argc = parse_options(argc, argv, options, script_usage,
+			     PARSE_OPT_STOP_AT_NON_OPTION);
+
+	if (argc > 1 && !strncmp(argv[0], "rec", strlen("rec"))) {
+		rec_script_path = get_script_path(argv[1], RECORD_SUFFIX);
+		if (!rec_script_path)
+			return cmd_record(argc, argv, NULL);
 	}
 
-	if (argc >= 2 && strncmp(argv[1], "rep", strlen("rep")) == 0) {
-		if (argc < 3) {
+	if (argc > 1 && !strncmp(argv[0], "rep", strlen("rep"))) {
+		rep_script_path = get_script_path(argv[1], REPORT_SUFFIX);
+		if (!rep_script_path) {
 			fprintf(stderr,
-				"Please specify a report script\n");
+				"Please specify a valid report script"
+				"(see 'perf script -l' for listing)\n");
 			return -1;
 		}
-		suffix = REPORT_SUFFIX;
 	}
 
 	/* make sure PERF_EXEC_PATH is set for scripts */
 	perf_set_argv_exec_path(perf_exec_path());
 
-	if (!suffix && argc >= 2 && strncmp(argv[1], "-", strlen("-")) != 0) {
-		char *record_script_path, *report_script_path;
+	if (argc && !script_name && !rec_script_path && !rep_script_path) {
 		int live_pipe[2];
+		int rep_args;
 		pid_t pid;
 
-		record_script_path = get_script_path(argv[1], RECORD_SUFFIX);
-		if (!record_script_path) {
-			fprintf(stderr, "record script not found\n");
-			return -1;
+		rec_script_path = get_script_path(argv[0], RECORD_SUFFIX);
+		rep_script_path = get_script_path(argv[0], REPORT_SUFFIX);
+
+		if (!rec_script_path && !rep_script_path) {
+			fprintf(stderr, " Couldn't find script %s\n\n See perf"
+				" script -l for available scripts.\n", argv[0]);
+			usage_with_options(script_usage, options);
 		}
 
-		report_script_path = get_script_path(argv[1], REPORT_SUFFIX);
-		if (!report_script_path) {
-			fprintf(stderr, "report script not found\n");
-			return -1;
+		if (is_top_script(argv[0])) {
+			rep_args = argc - 1;
+		} else {
+			int rec_args;
+
+			rep_args = has_required_arg(rep_script_path);
+			rec_args = (argc - 1) - rep_args;
+			if (rec_args < 0) {
+				fprintf(stderr, " %s script requires options."
+					"\n\n See perf script -l for available "
+					"scripts and options.\n", argv[0]);
+				usage_with_options(script_usage, options);
+			}
 		}
 
 		if (pipe(live_pipe) < 0) {
@@ -622,66 +684,90 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 		}
 
 		if (!pid) {
+			system_wide = true;
+			j = 0;
+
 			dup2(live_pipe[1], 1);
 			close(live_pipe[0]);
 
-			__argv = malloc(6 * sizeof(const char *));
-			__argv[0] = "/bin/sh";
-			__argv[1] = record_script_path;
-			__argv[2] = "-q";
-			__argv[3] = "-o";
-			__argv[4] = "-";
-			__argv[5] = NULL;
+			if (!is_top_script(argv[0]))
+				system_wide = !have_cmd(argc - rep_args,
+							&argv[rep_args]);
+
+			__argv = malloc((argc + 6) * sizeof(const char *));
+			if (!__argv)
+				die("malloc");
+
+			__argv[j++] = "/bin/sh";
+			__argv[j++] = rec_script_path;
+			if (system_wide)
+				__argv[j++] = "-a";
+			__argv[j++] = "-q";
+			__argv[j++] = "-o";
+			__argv[j++] = "-";
+			for (i = rep_args + 1; i < argc; i++)
+				__argv[j++] = argv[i];
+			__argv[j++] = NULL;
 
 			execvp("/bin/sh", (char **)__argv);
+			free(__argv);
 			exit(-1);
 		}
 
 		dup2(live_pipe[0], 0);
 		close(live_pipe[1]);
 
-		__argv = malloc((argc + 3) * sizeof(const char *));
-		__argv[0] = "/bin/sh";
-		__argv[1] = report_script_path;
-		for (i = 2; i < argc; i++)
-			__argv[i] = argv[i];
-		__argv[i++] = "-i";
-		__argv[i++] = "-";
-		__argv[i++] = NULL;
+		__argv = malloc((argc + 4) * sizeof(const char *));
+		if (!__argv)
+			die("malloc");
+		j = 0;
+		__argv[j++] = "/bin/sh";
+		__argv[j++] = rep_script_path;
+		for (i = 1; i < rep_args + 1; i++)
+			__argv[j++] = argv[i];
+		__argv[j++] = "-i";
+		__argv[j++] = "-";
+		__argv[j++] = NULL;
 
 		execvp("/bin/sh", (char **)__argv);
+		free(__argv);
 		exit(-1);
 	}
 
-	if (suffix) {
-		script_path = get_script_path(argv[2], suffix);
-		if (!script_path) {
-			fprintf(stderr, "script not found\n");
-			return -1;
-		}
-
-		__argv = malloc((argc + 1) * sizeof(const char *));
-		__argv[0] = "/bin/sh";
-		__argv[1] = script_path;
-		for (i = 3; i < argc; i++)
-			__argv[i - 1] = argv[i];
-		__argv[argc - 1] = NULL;
+	if (rec_script_path)
+		script_path = rec_script_path;
+	if (rep_script_path)
+		script_path = rep_script_path;
+
+	if (script_path) {
+		system_wide = false;
+		j = 0;
+
+		if (rec_script_path)
+			system_wide = !have_cmd(argc - 1, &argv[1]);
+
+		__argv = malloc((argc + 2) * sizeof(const char *));
+		if (!__argv)
+			die("malloc");
+		__argv[j++] = "/bin/sh";
+		__argv[j++] = script_path;
+		if (system_wide)
+			__argv[j++] = "-a";
+		for (i = 2; i < argc; i++)
+			__argv[j++] = argv[i];
+		__argv[j++] = NULL;
 
 		execvp("/bin/sh", (char **)__argv);
+		free(__argv);
 		exit(-1);
 	}
 
-	setup_scripting();
-
-	argc = parse_options(argc, argv, options, trace_usage,
-			     PARSE_OPT_STOP_AT_NON_OPTION);
-
 	if (symbol__init() < 0)
 		return -1;
 	if (!script_name)
 		setup_pager();
 
-	session = perf_session__new(input_name, O_RDONLY, 0, false);
+	session = perf_session__new(input_name, O_RDONLY, 0, false, &event_ops);
 	if (session == NULL)
 		return -ENOMEM;
 
@@ -715,7 +801,7 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 			return -1;
 		}
 
-		err = scripting_ops->generate_script("perf-trace");
+		err = scripting_ops->generate_script("perf-script");
 		goto out;
 	}
 
@@ -723,10 +809,10 @@ int cmd_trace(int argc, const char **argv, const char *prefix __used)
 		err = scripting_ops->start_script(script_name, argc, argv);
 		if (err)
 			goto out;
-		pr_debug("perf trace started with script %s\n\n", script_name);
+		pr_debug("perf script started with script %s\n\n", script_name);
 	}
 
-	err = __cmd_trace(session);
+	err = __cmd_script(session);
 
 	perf_session__delete(session);
 	cleanup_scripting();
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index a6b4d44f950..02b2d8013a6 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -43,6 +43,7 @@
 #include "util/parse-options.h"
 #include "util/parse-events.h"
 #include "util/event.h"
+#include "util/evsel.h"
 #include "util/debug.h"
 #include "util/header.h"
 #include "util/cpumap.h"
@@ -52,6 +53,8 @@
 #include <math.h>
 #include <locale.h>
 
+#define DEFAULT_SEPARATOR	" "
+
 static struct perf_event_attr default_attrs[] = {
 
   { .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK		},
@@ -69,25 +72,23 @@ static struct perf_event_attr default_attrs[] = {
 };
 
 static bool			system_wide			=  false;
-static int			nr_cpus				=  0;
+static struct cpu_map		*cpus;
 static int			run_idx				=  0;
 
 static int			run_count			=  1;
 static bool			no_inherit			= false;
 static bool			scale				=  true;
+static bool			no_aggr				= false;
 static pid_t			target_pid			= -1;
 static pid_t			target_tid			= -1;
-static pid_t			*all_tids			=  NULL;
-static int			thread_num			=  0;
+static struct thread_map	*threads;
 static pid_t			child_pid			= -1;
 static bool			null_run			=  false;
-static bool			big_num				=  false;
+static bool			big_num				=  true;
+static int			big_num_opt			=  -1;
 static const char		*cpu_list;
-
-
-static int			*fd[MAX_NR_CPUS][MAX_COUNTERS];
-
-static int			event_scaled[MAX_COUNTERS];
+static const char		*csv_sep			= NULL;
+static bool			csv_output			= false;
 
 static volatile int done = 0;
 
@@ -96,6 +97,22 @@ struct stats
 	double n, mean, M2;
 };
 
+struct perf_stat {
+	struct stats	  res_stats[3];
+};
+
+static int perf_evsel__alloc_stat_priv(struct perf_evsel *evsel)
+{
+	evsel->priv = zalloc(sizeof(struct perf_stat));
+	return evsel->priv == NULL ? -ENOMEM : 0;
+}
+
+static void perf_evsel__free_stat_priv(struct perf_evsel *evsel)
+{
+	free(evsel->priv);
+	evsel->priv = NULL;
+}
+
 static void update_stats(struct stats *stats, u64 val)
 {
 	double delta;
@@ -135,69 +152,38 @@ static double stddev_stats(struct stats *stats)
 	return sqrt(variance_mean);
 }
 
-struct stats			event_res_stats[MAX_COUNTERS][3];
-struct stats			runtime_nsecs_stats;
+struct stats			runtime_nsecs_stats[MAX_NR_CPUS];
+struct stats			runtime_cycles_stats[MAX_NR_CPUS];
+struct stats			runtime_branches_stats[MAX_NR_CPUS];
 struct stats			walltime_nsecs_stats;
-struct stats			runtime_cycles_stats;
-struct stats			runtime_branches_stats;
 
-#define MATCH_EVENT(t, c, counter)			\
-	(attrs[counter].type == PERF_TYPE_##t &&	\
-	 attrs[counter].config == PERF_COUNT_##c)
-
-#define ERR_PERF_OPEN \
-"Error: counter %d, sys_perf_event_open() syscall returned with %d (%s)\n"
-
-static int create_perf_stat_counter(int counter)
+static int create_perf_stat_counter(struct perf_evsel *evsel)
 {
-	struct perf_event_attr *attr = attrs + counter;
-	int thread;
-	int ncreated = 0;
+	struct perf_event_attr *attr = &evsel->attr;
 
 	if (scale)
 		attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
 				    PERF_FORMAT_TOTAL_TIME_RUNNING;
 
-	if (system_wide) {
-		int cpu;
-
-		for (cpu = 0; cpu < nr_cpus; cpu++) {
-			fd[cpu][counter][0] = sys_perf_event_open(attr,
-					-1, cpumap[cpu], -1, 0);
-			if (fd[cpu][counter][0] < 0)
-				pr_debug(ERR_PERF_OPEN, counter,
-					 fd[cpu][counter][0], strerror(errno));
-			else
-				++ncreated;
-		}
-	} else {
-		attr->inherit = !no_inherit;
-		if (target_pid == -1 && target_tid == -1) {
-			attr->disabled = 1;
-			attr->enable_on_exec = 1;
-		}
-		for (thread = 0; thread < thread_num; thread++) {
-			fd[0][counter][thread] = sys_perf_event_open(attr,
-				all_tids[thread], -1, -1, 0);
-			if (fd[0][counter][thread] < 0)
-				pr_debug(ERR_PERF_OPEN, counter,
-					 fd[0][counter][thread],
-					 strerror(errno));
-			else
-				++ncreated;
-		}
+	if (system_wide)
+		return perf_evsel__open_per_cpu(evsel, cpus);
+
+	attr->inherit = !no_inherit;
+	if (target_pid == -1 && target_tid == -1) {
+		attr->disabled = 1;
+		attr->enable_on_exec = 1;
 	}
 
-	return ncreated;
+	return perf_evsel__open_per_thread(evsel, threads);
 }
 
 /*
  * Does the counter have nsecs as a unit?
  */
-static inline int nsec_counter(int counter)
+static inline int nsec_counter(struct perf_evsel *evsel)
 {
-	if (MATCH_EVENT(SOFTWARE, SW_CPU_CLOCK, counter) ||
-	    MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
+	if (perf_evsel__match(evsel, SOFTWARE, SW_CPU_CLOCK) ||
+	    perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK))
 		return 1;
 
 	return 0;
@@ -205,55 +191,19 @@ static inline int nsec_counter(int counter)
 
 /*
  * Read out the results of a single counter:
+ * aggregate counts across CPUs in system-wide mode
  */
-static void read_counter(int counter)
+static int read_counter_aggr(struct perf_evsel *counter)
 {
-	u64 count[3], single_count[3];
-	int cpu;
-	size_t res, nv;
-	int scaled;
-	int i, thread;
-
-	count[0] = count[1] = count[2] = 0;
-
-	nv = scale ? 3 : 1;
-	for (cpu = 0; cpu < nr_cpus; cpu++) {
-		for (thread = 0; thread < thread_num; thread++) {
-			if (fd[cpu][counter][thread] < 0)
-				continue;
-
-			res = read(fd[cpu][counter][thread],
-					single_count, nv * sizeof(u64));
-			assert(res == nv * sizeof(u64));
-
-			close(fd[cpu][counter][thread]);
-			fd[cpu][counter][thread] = -1;
-
-			count[0] += single_count[0];
-			if (scale) {
-				count[1] += single_count[1];
-				count[2] += single_count[2];
-			}
-		}
-	}
-
-	scaled = 0;
-	if (scale) {
-		if (count[2] == 0) {
-			event_scaled[counter] = -1;
-			count[0] = 0;
-			return;
-		}
+	struct perf_stat *ps = counter->priv;
+	u64 *count = counter->counts->aggr.values;
+	int i;
 
-		if (count[2] < count[1]) {
-			event_scaled[counter] = 1;
-			count[0] = (unsigned long long)
-				((double)count[0] * count[1] / count[2] + 0.5);
-		}
-	}
+	if (__perf_evsel__read(counter, cpus->nr, threads->nr, scale) < 0)
+		return -1;
 
 	for (i = 0; i < 3; i++)
-		update_stats(&event_res_stats[counter][i], count[i]);
+		update_stats(&ps->res_stats[i], count[i]);
 
 	if (verbose) {
 		fprintf(stderr, "%s: %Ld %Ld %Ld\n", event_name(counter),
@@ -263,26 +213,51 @@ static void read_counter(int counter)
 	/*
 	 * Save the full runtime - to allow normalization during printout:
 	 */
-	if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter))
-		update_stats(&runtime_nsecs_stats, count[0]);
-	if (MATCH_EVENT(HARDWARE, HW_CPU_CYCLES, counter))
-		update_stats(&runtime_cycles_stats, count[0]);
-	if (MATCH_EVENT(HARDWARE, HW_BRANCH_INSTRUCTIONS, counter))
-		update_stats(&runtime_branches_stats, count[0]);
+	if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK))
+		update_stats(&runtime_nsecs_stats[0], count[0]);
+	if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
+		update_stats(&runtime_cycles_stats[0], count[0]);
+	if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
+		update_stats(&runtime_branches_stats[0], count[0]);
+
+	return 0;
+}
+
+/*
+ * Read out the results of a single counter:
+ * do not aggregate counts across CPUs in system-wide mode
+ */
+static int read_counter(struct perf_evsel *counter)
+{
+	u64 *count;
+	int cpu;
+
+	for (cpu = 0; cpu < cpus->nr; cpu++) {
+		if (__perf_evsel__read_on_cpu(counter, cpu, 0, scale) < 0)
+			return -1;
+
+		count = counter->counts->cpu[cpu].values;
+
+		if (perf_evsel__match(counter, SOFTWARE, SW_TASK_CLOCK))
+			update_stats(&runtime_nsecs_stats[cpu], count[0]);
+		if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
+			update_stats(&runtime_cycles_stats[cpu], count[0]);
+		if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
+			update_stats(&runtime_branches_stats[cpu], count[0]);
+	}
+
+	return 0;
 }
 
 static int run_perf_stat(int argc __used, const char **argv)
 {
 	unsigned long long t0, t1;
+	struct perf_evsel *counter;
 	int status = 0;
-	int counter, ncreated = 0;
 	int child_ready_pipe[2], go_pipe[2];
 	const bool forks = (argc > 0);
 	char buf;
 
-	if (!system_wide)
-		nr_cpus = 1;
-
 	if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) {
 		perror("failed to create pipes");
 		exit(1);
@@ -322,7 +297,7 @@ static int run_perf_stat(int argc __used, const char **argv)
 		}
 
 		if (target_tid == -1 && target_pid == -1 && !system_wide)
-			all_tids[0] = child_pid;
+			threads->map[0] = child_pid;
 
 		/*
 		 * Wait for the child to be ready to exec.
@@ -334,16 +309,23 @@ static int run_perf_stat(int argc __used, const char **argv)
 		close(child_ready_pipe[0]);
 	}
 
-	for (counter = 0; counter < nr_counters; counter++)
-		ncreated += create_perf_stat_counter(counter);
-
-	if (ncreated == 0) {
-		pr_err("No permission to collect %sstats.\n"
-		       "Consider tweaking /proc/sys/kernel/perf_event_paranoid.\n",
-		       system_wide ? "system-wide " : "");
-		if (child_pid != -1)
-			kill(child_pid, SIGTERM);
-		return -1;
+	list_for_each_entry(counter, &evsel_list, node) {
+		if (create_perf_stat_counter(counter) < 0) {
+			if (errno == -EPERM || errno == -EACCES) {
+				error("You may not have permission to collect %sstats.\n"
+				      "\t Consider tweaking"
+				      " /proc/sys/kernel/perf_event_paranoid or running as root.",
+				      system_wide ? "system-wide " : "");
+			} else {
+				error("open_counter returned with %d (%s). "
+				      "/bin/dmesg may provide additional information.\n",
+				       errno, strerror(errno));
+			}
+			if (child_pid != -1)
+				kill(child_pid, SIGTERM);
+			die("Not all events could be opened.\n");
+			return -1;
+		}
 	}
 
 	/*
@@ -362,60 +344,97 @@ static int run_perf_stat(int argc __used, const char **argv)
 
 	update_stats(&walltime_nsecs_stats, t1 - t0);
 
-	for (counter = 0; counter < nr_counters; counter++)
-		read_counter(counter);
+	if (no_aggr) {
+		list_for_each_entry(counter, &evsel_list, node) {
+			read_counter(counter);
+			perf_evsel__close_fd(counter, cpus->nr, 1);
+		}
+	} else {
+		list_for_each_entry(counter, &evsel_list, node) {
+			read_counter_aggr(counter);
+			perf_evsel__close_fd(counter, cpus->nr, threads->nr);
+		}
+	}
 
 	return WEXITSTATUS(status);
 }
 
-static void print_noise(int counter, double avg)
+static void print_noise(struct perf_evsel *evsel, double avg)
 {
+	struct perf_stat *ps;
+
 	if (run_count == 1)
 		return;
 
+	ps = evsel->priv;
 	fprintf(stderr, "   ( +- %7.3f%% )",
-			100 * stddev_stats(&event_res_stats[counter][0]) / avg);
+			100 * stddev_stats(&ps->res_stats[0]) / avg);
 }
 
-static void nsec_printout(int counter, double avg)
+static void nsec_printout(int cpu, struct perf_evsel *evsel, double avg)
 {
 	double msecs = avg / 1e6;
+	char cpustr[16] = { '\0', };
+	const char *fmt = csv_output ? "%s%.6f%s%s" : "%s%18.6f%s%-24s";
 
-	fprintf(stderr, " %18.6f  %-24s", msecs, event_name(counter));
+	if (no_aggr)
+		sprintf(cpustr, "CPU%*d%s",
+			csv_output ? 0 : -4,
+			cpus->map[cpu], csv_sep);
+
+	fprintf(stderr, fmt, cpustr, msecs, csv_sep, event_name(evsel));
+
+	if (csv_output)
+		return;
 
-	if (MATCH_EVENT(SOFTWARE, SW_TASK_CLOCK, counter)) {
+	if (perf_evsel__match(evsel, SOFTWARE, SW_TASK_CLOCK))
 		fprintf(stderr, " # %10.3f CPUs ",
 				avg / avg_stats(&walltime_nsecs_stats));
-	}
 }
 
-static void abs_printout(int counter, double avg)
+static void abs_printout(int cpu, struct perf_evsel *evsel, double avg)
 {
 	double total, ratio = 0.0;
+	char cpustr[16] = { '\0', };
+	const char *fmt;
+
+	if (csv_output)
+		fmt = "%s%.0f%s%s";
+	else if (big_num)
+		fmt = "%s%'18.0f%s%-24s";
+	else
+		fmt = "%s%18.0f%s%-24s";
 
-	if (big_num)
-		fprintf(stderr, " %'18.0f  %-24s", avg, event_name(counter));
+	if (no_aggr)
+		sprintf(cpustr, "CPU%*d%s",
+			csv_output ? 0 : -4,
+			cpus->map[cpu], csv_sep);
 	else
-		fprintf(stderr, " %18.0f  %-24s", avg, event_name(counter));
+		cpu = 0;
+
+	fprintf(stderr, fmt, cpustr, avg, csv_sep, event_name(evsel));
 
-	if (MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
-		total = avg_stats(&runtime_cycles_stats);
+	if (csv_output)
+		return;
+
+	if (perf_evsel__match(evsel, HARDWARE, HW_INSTRUCTIONS)) {
+		total = avg_stats(&runtime_cycles_stats[cpu]);
 
 		if (total)
 			ratio = avg / total;
 
 		fprintf(stderr, " # %10.3f IPC  ", ratio);
-	} else if (MATCH_EVENT(HARDWARE, HW_BRANCH_MISSES, counter) &&
-			runtime_branches_stats.n != 0) {
-		total = avg_stats(&runtime_branches_stats);
+	} else if (perf_evsel__match(evsel, HARDWARE, HW_BRANCH_MISSES) &&
+			runtime_branches_stats[cpu].n != 0) {
+		total = avg_stats(&runtime_branches_stats[cpu]);
 
 		if (total)
 			ratio = avg * 100 / total;
 
 		fprintf(stderr, " # %10.3f %%    ", ratio);
 
-	} else if (runtime_nsecs_stats.n != 0) {
-		total = avg_stats(&runtime_nsecs_stats);
+	} else if (runtime_nsecs_stats[cpu].n != 0) {
+		total = avg_stats(&runtime_nsecs_stats[cpu]);
 
 		if (total)
 			ratio = 1000.0 * avg / total;
@@ -426,30 +445,38 @@ static void abs_printout(int counter, double avg)
 
 /*
  * Print out the results of a single counter:
+ * aggregated counts in system-wide mode
  */
-static void print_counter(int counter)
+static void print_counter_aggr(struct perf_evsel *counter)
 {
-	double avg = avg_stats(&event_res_stats[counter][0]);
-	int scaled = event_scaled[counter];
+	struct perf_stat *ps = counter->priv;
+	double avg = avg_stats(&ps->res_stats[0]);
+	int scaled = counter->counts->scaled;
 
 	if (scaled == -1) {
-		fprintf(stderr, " %18s  %-24s\n",
-			"<not counted>", event_name(counter));
+		fprintf(stderr, "%*s%s%-24s\n",
+			csv_output ? 0 : 18,
+			"<not counted>", csv_sep, event_name(counter));
 		return;
 	}
 
 	if (nsec_counter(counter))
-		nsec_printout(counter, avg);
+		nsec_printout(-1, counter, avg);
 	else
-		abs_printout(counter, avg);
+		abs_printout(-1, counter, avg);
+
+	if (csv_output) {
+		fputc('\n', stderr);
+		return;
+	}
 
 	print_noise(counter, avg);
 
 	if (scaled) {
 		double avg_enabled, avg_running;
 
-		avg_enabled = avg_stats(&event_res_stats[counter][1]);
-		avg_running = avg_stats(&event_res_stats[counter][2]);
+		avg_enabled = avg_stats(&ps->res_stats[1]);
+		avg_running = avg_stats(&ps->res_stats[2]);
 
 		fprintf(stderr, "  (scaled from %.2f%%)",
 				100 * avg_running / avg_enabled);
@@ -458,40 +485,92 @@ static void print_counter(int counter)
 	fprintf(stderr, "\n");
 }
 
+/*
+ * Print out the results of a single counter:
+ * does not use aggregated count in system-wide
+ */
+static void print_counter(struct perf_evsel *counter)
+{
+	u64 ena, run, val;
+	int cpu;
+
+	for (cpu = 0; cpu < cpus->nr; cpu++) {
+		val = counter->counts->cpu[cpu].val;
+		ena = counter->counts->cpu[cpu].ena;
+		run = counter->counts->cpu[cpu].run;
+		if (run == 0 || ena == 0) {
+			fprintf(stderr, "CPU%*d%s%*s%s%-24s",
+				csv_output ? 0 : -4,
+				cpus->map[cpu], csv_sep,
+				csv_output ? 0 : 18,
+				"<not counted>", csv_sep,
+				event_name(counter));
+
+			fprintf(stderr, "\n");
+			continue;
+		}
+
+		if (nsec_counter(counter))
+			nsec_printout(cpu, counter, val);
+		else
+			abs_printout(cpu, counter, val);
+
+		if (!csv_output) {
+			print_noise(counter, 1.0);
+
+			if (run != ena) {
+				fprintf(stderr, "  (scaled from %.2f%%)",
+					100.0 * run / ena);
+			}
+		}
+		fprintf(stderr, "\n");
+	}
+}
+
 static void print_stat(int argc, const char **argv)
 {
-	int i, counter;
+	struct perf_evsel *counter;
+	int i;
 
 	fflush(stdout);
 
-	fprintf(stderr, "\n");
-	fprintf(stderr, " Performance counter stats for ");
-	if(target_pid == -1 && target_tid == -1) {
-		fprintf(stderr, "\'%s", argv[0]);
-		for (i = 1; i < argc; i++)
-			fprintf(stderr, " %s", argv[i]);
-	} else if (target_pid != -1)
-		fprintf(stderr, "process id \'%d", target_pid);
-	else
-		fprintf(stderr, "thread id \'%d", target_tid);
-
-	fprintf(stderr, "\'");
-	if (run_count > 1)
-		fprintf(stderr, " (%d runs)", run_count);
-	fprintf(stderr, ":\n\n");
+	if (!csv_output) {
+		fprintf(stderr, "\n");
+		fprintf(stderr, " Performance counter stats for ");
+		if(target_pid == -1 && target_tid == -1) {
+			fprintf(stderr, "\'%s", argv[0]);
+			for (i = 1; i < argc; i++)
+				fprintf(stderr, " %s", argv[i]);
+		} else if (target_pid != -1)
+			fprintf(stderr, "process id \'%d", target_pid);
+		else
+			fprintf(stderr, "thread id \'%d", target_tid);
+
+		fprintf(stderr, "\'");
+		if (run_count > 1)
+			fprintf(stderr, " (%d runs)", run_count);
+		fprintf(stderr, ":\n\n");
+	}
 
-	for (counter = 0; counter < nr_counters; counter++)
-		print_counter(counter);
+	if (no_aggr) {
+		list_for_each_entry(counter, &evsel_list, node)
+			print_counter(counter);
+	} else {
+		list_for_each_entry(counter, &evsel_list, node)
+			print_counter_aggr(counter);
+	}
 
-	fprintf(stderr, "\n");
-	fprintf(stderr, " %18.9f  seconds time elapsed",
-			avg_stats(&walltime_nsecs_stats)/1e9);
-	if (run_count > 1) {
-		fprintf(stderr, "   ( +- %7.3f%% )",
+	if (!csv_output) {
+		fprintf(stderr, "\n");
+		fprintf(stderr, " %18.9f  seconds time elapsed",
+				avg_stats(&walltime_nsecs_stats)/1e9);
+		if (run_count > 1) {
+			fprintf(stderr, "   ( +- %7.3f%% )",
 				100*stddev_stats(&walltime_nsecs_stats) /
 				avg_stats(&walltime_nsecs_stats));
+		}
+		fprintf(stderr, "\n\n");
 	}
-	fprintf(stderr, "\n\n");
 }
 
 static volatile int signr = -1;
@@ -521,6 +600,13 @@ static const char * const stat_usage[] = {
 	NULL
 };
 
+static int stat__set_big_num(const struct option *opt __used,
+			     const char *s __used, int unset)
+{
+	big_num_opt = unset ? 0 : 1;
+	return 0;
+}
+
 static const struct option options[] = {
 	OPT_CALLBACK('e', "event", NULL, "event",
 		     "event selector. use 'perf list' to list available events",
@@ -541,64 +627,96 @@ static const struct option options[] = {
 		    "repeat command and print average + stddev (max: 100)"),
 	OPT_BOOLEAN('n', "null", &null_run,
 		    "null run - dont start any counters"),
-	OPT_BOOLEAN('B', "big-num", &big_num,
-		    "print large numbers with thousands\' separators"),
+	OPT_CALLBACK_NOOPT('B', "big-num", NULL, NULL, 
+			   "print large numbers with thousands\' separators",
+			   stat__set_big_num),
 	OPT_STRING('C', "cpu", &cpu_list, "cpu",
 		    "list of cpus to monitor in system-wide"),
+	OPT_BOOLEAN('A', "no-aggr", &no_aggr,
+		    "disable CPU count aggregation"),
+	OPT_STRING('x', "field-separator", &csv_sep, "separator",
+		   "print counts with custom separator"),
 	OPT_END()
 };
 
 int cmd_stat(int argc, const char **argv, const char *prefix __used)
 {
-	int status;
-	int i,j;
+	struct perf_evsel *pos;
+	int status = -ENOMEM;
 
 	setlocale(LC_ALL, "");
 
 	argc = parse_options(argc, argv, options, stat_usage,
 		PARSE_OPT_STOP_AT_NON_OPTION);
+
+	if (csv_sep)
+		csv_output = true;
+	else
+		csv_sep = DEFAULT_SEPARATOR;
+
+	/*
+	 * let the spreadsheet do the pretty-printing
+	 */
+	if (csv_output) {
+		/* User explicitely passed -B? */
+		if (big_num_opt == 1) {
+			fprintf(stderr, "-B option not supported with -x\n");
+			usage_with_options(stat_usage, options);
+		} else /* Nope, so disable big number formatting */
+			big_num = false;
+	} else if (big_num_opt == 0) /* User passed --no-big-num */
+		big_num = false;
+
 	if (!argc && target_pid == -1 && target_tid == -1)
 		usage_with_options(stat_usage, options);
 	if (run_count <= 0)
 		usage_with_options(stat_usage, options);
 
+	/* no_aggr is for system-wide only */
+	if (no_aggr && !system_wide)
+		usage_with_options(stat_usage, options);
+
 	/* Set attrs and nr_counters if no event is selected and !null_run */
 	if (!null_run && !nr_counters) {
-		memcpy(attrs, default_attrs, sizeof(default_attrs));
+		size_t c;
+
 		nr_counters = ARRAY_SIZE(default_attrs);
+
+		for (c = 0; c < ARRAY_SIZE(default_attrs); ++c) {
+			pos = perf_evsel__new(default_attrs[c].type,
+					      default_attrs[c].config,
+					      nr_counters);
+			if (pos == NULL)
+				goto out;
+			list_add(&pos->node, &evsel_list);
+		}
 	}
 
-	if (system_wide)
-		nr_cpus = read_cpu_map(cpu_list);
-	else
-		nr_cpus = 1;
+	if (target_pid != -1)
+		target_tid = target_pid;
 
-	if (nr_cpus < 1)
+	threads = thread_map__new(target_pid, target_tid);
+	if (threads == NULL) {
+		pr_err("Problems finding threads of monitor\n");
 		usage_with_options(stat_usage, options);
+	}
 
-	if (target_pid != -1) {
-		target_tid = target_pid;
-		thread_num = find_all_tid(target_pid, &all_tids);
-		if (thread_num <= 0) {
-			fprintf(stderr, "Can't find all threads of pid %d\n",
-					target_pid);
-			usage_with_options(stat_usage, options);
-		}
-	} else {
-		all_tids=malloc(sizeof(pid_t));
-		if (!all_tids)
-			return -ENOMEM;
+	if (system_wide)
+		cpus = cpu_map__new(cpu_list);
+	else
+		cpus = cpu_map__dummy_new();
 
-		all_tids[0] = target_tid;
-		thread_num = 1;
+	if (cpus == NULL) {
+		perror("failed to parse CPUs map");
+		usage_with_options(stat_usage, options);
+		return -1;
 	}
 
-	for (i = 0; i < MAX_NR_CPUS; i++) {
-		for (j = 0; j < MAX_COUNTERS; j++) {
-			fd[i][j] = malloc(sizeof(int)*thread_num);
-			if (!fd[i][j])
-				return -ENOMEM;
-		}
+	list_for_each_entry(pos, &evsel_list, node) {
+		if (perf_evsel__alloc_stat_priv(pos) < 0 ||
+		    perf_evsel__alloc_counts(pos, cpus->nr) < 0 ||
+		    perf_evsel__alloc_fd(pos, cpus->nr, threads->nr) < 0)
+			goto out_free_fd;
 	}
 
 	/*
@@ -621,6 +739,11 @@ int cmd_stat(int argc, const char **argv, const char *prefix __used)
 
 	if (status != -1)
 		print_stat(argc, argv);
-
+out_free_fd:
+	list_for_each_entry(pos, &evsel_list, node)
+		perf_evsel__free_stat_priv(pos);
+out:
+	thread_map__delete(threads);
+	threads = NULL;
 	return status;
 }
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index 035b9fa063a..1c984342a57 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -119,10 +119,16 @@ static int test__vmlinux_matches_kallsyms(void)
 	 * end addresses too.
 	 */
 	for (nd = rb_first(&vmlinux_map->dso->symbols[type]); nd; nd = rb_next(nd)) {
-		struct symbol *pair;
+		struct symbol *pair, *first_pair;
+		bool backwards = true;
 
 		sym  = rb_entry(nd, struct symbol, rb_node);
-		pair = machine__find_kernel_symbol(&kallsyms, type, sym->start, NULL, NULL);
+
+		if (sym->start == sym->end)
+			continue;
+
+		first_pair = machine__find_kernel_symbol(&kallsyms, type, sym->start, NULL, NULL);
+		pair = first_pair;
 
 		if (pair && pair->start == sym->start) {
 next_pair:
@@ -143,8 +149,10 @@ next_pair:
 				pr_debug("%#Lx: diff end addr for %s v: %#Lx k: %#Lx\n",
 					 sym->start, sym->name, sym->end, pair->end);
 			} else {
-				struct rb_node *nnd = rb_prev(&pair->rb_node);
-
+				struct rb_node *nnd;
+detour:
+				nnd = backwards ? rb_prev(&pair->rb_node) :
+						  rb_next(&pair->rb_node);
 				if (nnd) {
 					struct symbol *next = rb_entry(nnd, struct symbol, rb_node);
 
@@ -153,6 +161,13 @@ next_pair:
 						goto next_pair;
 					}
 				}
+
+				if (backwards) {
+					backwards = false;
+					pair = first_pair;
+					goto detour;
+				}
+
 				pr_debug("%#Lx: diff name v: %s k: %s\n",
 					 sym->start, sym->name, pair->name);
 			}
@@ -219,6 +234,89 @@ out:
 	return err;
 }
 
+#include "util/evsel.h"
+#include <sys/types.h>
+
+static int trace_event__id(const char *event_name)
+{
+	char *filename;
+	int err = -1, fd;
+
+	if (asprintf(&filename,
+		     "/sys/kernel/debug/tracing/events/syscalls/%s/id",
+		     event_name) < 0)
+		return -1;
+
+	fd = open(filename, O_RDONLY);
+	if (fd >= 0) {
+		char id[16];
+		if (read(fd, id, sizeof(id)) > 0)
+			err = atoi(id);
+		close(fd);
+	}
+
+	free(filename);
+	return err;
+}
+
+static int test__open_syscall_event(void)
+{
+	int err = -1, fd;
+	struct thread_map *threads;
+	struct perf_evsel *evsel;
+	unsigned int nr_open_calls = 111, i;
+	int id = trace_event__id("sys_enter_open");
+
+	if (id < 0) {
+		pr_debug("is debugfs mounted on /sys/kernel/debug?\n");
+		return -1;
+	}
+
+	threads = thread_map__new(-1, getpid());
+	if (threads == NULL) {
+		pr_debug("thread_map__new\n");
+		return -1;
+	}
+
+	evsel = perf_evsel__new(PERF_TYPE_TRACEPOINT, id, 0);
+	if (evsel == NULL) {
+		pr_debug("perf_evsel__new\n");
+		goto out_thread_map_delete;
+	}
+
+	if (perf_evsel__open_per_thread(evsel, threads) < 0) {
+		pr_debug("failed to open counter: %s, "
+			 "tweak /proc/sys/kernel/perf_event_paranoid?\n",
+			 strerror(errno));
+		goto out_evsel_delete;
+	}
+
+	for (i = 0; i < nr_open_calls; ++i) {
+		fd = open("/etc/passwd", O_RDONLY);
+		close(fd);
+	}
+
+	if (perf_evsel__read_on_cpu(evsel, 0, 0) < 0) {
+		pr_debug("perf_evsel__open_read_on_cpu\n");
+		goto out_close_fd;
+	}
+
+	if (evsel->counts->cpu[0].val != nr_open_calls) {
+		pr_debug("perf_evsel__read_on_cpu: expected to intercept %d calls, got %Ld\n",
+			 nr_open_calls, evsel->counts->cpu[0].val);
+		goto out_close_fd;
+	}
+	
+	err = 0;
+out_close_fd:
+	perf_evsel__close_fd(evsel, 1, threads->nr);
+out_evsel_delete:
+	perf_evsel__delete(evsel);
+out_thread_map_delete:
+	thread_map__delete(threads);
+	return err;
+}
+
 static struct test {
 	const char *desc;
 	int (*func)(void);
@@ -228,6 +326,10 @@ static struct test {
 		.func = test__vmlinux_matches_kallsyms,
 	},
 	{
+		.desc = "detect open syscall event",
+		.func = test__open_syscall_event,
+	},
+	{
 		.func = NULL,
 	},
 };
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index 9bcc38f0b70..746cf03cb05 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -32,6 +32,10 @@
 #include "util/session.h"
 #include "util/svghelper.h"
 
+#define SUPPORT_OLD_POWER_EVENTS 1
+#define PWR_EVENT_EXIT -1
+
+
 static char		const *input_name = "perf.data";
 static char		const *output_name = "output.svg";
 
@@ -272,19 +276,22 @@ static int cpus_cstate_state[MAX_CPUS];
 static u64 cpus_pstate_start_times[MAX_CPUS];
 static u64 cpus_pstate_state[MAX_CPUS];
 
-static int process_comm_event(event_t *event, struct perf_session *session __used)
+static int process_comm_event(event_t *event, struct sample_data *sample __used,
+			      struct perf_session *session __used)
 {
 	pid_set_comm(event->comm.tid, event->comm.comm);
 	return 0;
 }
 
-static int process_fork_event(event_t *event, struct perf_session *session __used)
+static int process_fork_event(event_t *event, struct sample_data *sample __used,
+			      struct perf_session *session __used)
 {
 	pid_fork(event->fork.pid, event->fork.ppid, event->fork.time);
 	return 0;
 }
 
-static int process_exit_event(event_t *event, struct perf_session *session __used)
+static int process_exit_event(event_t *event, struct sample_data *sample __used,
+			      struct perf_session *session __used)
 {
 	pid_exit(event->fork.pid, event->fork.time);
 	return 0;
@@ -298,12 +305,21 @@ struct trace_entry {
 	int			lock_depth;
 };
 
-struct power_entry {
+#ifdef SUPPORT_OLD_POWER_EVENTS
+static int use_old_power_events;
+struct power_entry_old {
 	struct trace_entry te;
 	u64	type;
 	u64	value;
 	u64	cpu_id;
 };
+#endif
+
+struct power_processor_entry {
+	struct trace_entry te;
+	u32	state;
+	u32	cpu_id;
+};
 
 #define TASK_COMM_LEN 16
 struct wakeup_entry {
@@ -470,48 +486,65 @@ static void sched_switch(int cpu, u64 timestamp, struct trace_entry *te)
 }
 
 
-static int process_sample_event(event_t *event, struct perf_session *session)
+static int process_sample_event(event_t *event __used,
+				struct sample_data *sample,
+				struct perf_session *session)
 {
-	struct sample_data data;
 	struct trace_entry *te;
 
-	memset(&data, 0, sizeof(data));
-
-	event__parse_sample(event, session->sample_type, &data);
-
 	if (session->sample_type & PERF_SAMPLE_TIME) {
-		if (!first_time || first_time > data.time)
-			first_time = data.time;
-		if (last_time < data.time)
-			last_time = data.time;
+		if (!first_time || first_time > sample->time)
+			first_time = sample->time;
+		if (last_time < sample->time)
+			last_time = sample->time;
 	}
 
-	te = (void *)data.raw_data;
-	if (session->sample_type & PERF_SAMPLE_RAW && data.raw_size > 0) {
+	te = (void *)sample->raw_data;
+	if (session->sample_type & PERF_SAMPLE_RAW && sample->raw_size > 0) {
 		char *event_str;
-		struct power_entry *pe;
-
-		pe = (void *)te;
-
+#ifdef SUPPORT_OLD_POWER_EVENTS
+		struct power_entry_old *peo;
+		peo = (void *)te;
+#endif
 		event_str = perf_header__find_event(te->type);
 
 		if (!event_str)
 			return 0;
 
-		if (strcmp(event_str, "power:power_start") == 0)
-			c_state_start(pe->cpu_id, data.time, pe->value);
+		if (strcmp(event_str, "power:cpu_idle") == 0) {
+			struct power_processor_entry *ppe = (void *)te;
+			if (ppe->state == (u32)PWR_EVENT_EXIT)
+				c_state_end(ppe->cpu_id, sample->time);
+			else
+				c_state_start(ppe->cpu_id, sample->time,
+					      ppe->state);
+		}
+		else if (strcmp(event_str, "power:cpu_frequency") == 0) {
+			struct power_processor_entry *ppe = (void *)te;
+			p_state_change(ppe->cpu_id, sample->time, ppe->state);
+		}
+
+		else if (strcmp(event_str, "sched:sched_wakeup") == 0)
+			sched_wakeup(sample->cpu, sample->time, sample->pid, te);
 
-		if (strcmp(event_str, "power:power_end") == 0)
-			c_state_end(pe->cpu_id, data.time);
+		else if (strcmp(event_str, "sched:sched_switch") == 0)
+			sched_switch(sample->cpu, sample->time, te);
 
-		if (strcmp(event_str, "power:power_frequency") == 0)
-			p_state_change(pe->cpu_id, data.time, pe->value);
+#ifdef SUPPORT_OLD_POWER_EVENTS
+		if (use_old_power_events) {
+			if (strcmp(event_str, "power:power_start") == 0)
+				c_state_start(peo->cpu_id, sample->time,
+					      peo->value);
 
-		if (strcmp(event_str, "sched:sched_wakeup") == 0)
-			sched_wakeup(data.cpu, data.time, data.pid, te);
+			else if (strcmp(event_str, "power:power_end") == 0)
+				c_state_end(sample->cpu, sample->time);
 
-		if (strcmp(event_str, "sched:sched_switch") == 0)
-			sched_switch(data.cpu, data.time, te);
+			else if (strcmp(event_str,
+					"power:power_frequency") == 0)
+				p_state_change(peo->cpu_id, sample->time,
+					       peo->value);
+		}
+#endif
 	}
 	return 0;
 }
@@ -937,7 +970,8 @@ static struct perf_event_ops event_ops = {
 
 static int __cmd_timechart(void)
 {
-	struct perf_session *session = perf_session__new(input_name, O_RDONLY, 0, false);
+	struct perf_session *session = perf_session__new(input_name, O_RDONLY,
+							 0, false, &event_ops);
 	int ret = -EINVAL;
 
 	if (session == NULL)
@@ -968,7 +1002,8 @@ static const char * const timechart_usage[] = {
 	NULL
 };
 
-static const char *record_args[] = {
+#ifdef SUPPORT_OLD_POWER_EVENTS
+static const char * const record_old_args[] = {
 	"record",
 	"-a",
 	"-R",
@@ -980,16 +1015,43 @@ static const char *record_args[] = {
 	"-e", "sched:sched_wakeup",
 	"-e", "sched:sched_switch",
 };
+#endif
+
+static const char * const record_new_args[] = {
+	"record",
+	"-a",
+	"-R",
+	"-f",
+	"-c", "1",
+	"-e", "power:cpu_frequency",
+	"-e", "power:cpu_idle",
+	"-e", "sched:sched_wakeup",
+	"-e", "sched:sched_switch",
+};
 
 static int __cmd_record(int argc, const char **argv)
 {
 	unsigned int rec_argc, i, j;
 	const char **rec_argv;
+	const char * const *record_args = record_new_args;
+	unsigned int record_elems = ARRAY_SIZE(record_new_args);
+
+#ifdef SUPPORT_OLD_POWER_EVENTS
+	if (!is_valid_tracepoint("power:cpu_idle") &&
+	    is_valid_tracepoint("power:power_start")) {
+		use_old_power_events = 1;
+		record_args = record_old_args;
+		record_elems = ARRAY_SIZE(record_old_args);
+	}
+#endif
 
-	rec_argc = ARRAY_SIZE(record_args) + argc - 1;
+	rec_argc = record_elems + argc - 1;
 	rec_argv = calloc(rec_argc + 1, sizeof(char *));
 
-	for (i = 0; i < ARRAY_SIZE(record_args); i++)
+	if (rec_argv == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < record_elems; i++)
 		rec_argv[i] = strdup(record_args[i]);
 
 	for (j = 1; j < (unsigned int)argc; j++, i++)
@@ -1018,6 +1080,8 @@ static const struct option options[] = {
 	OPT_CALLBACK('p', "process", NULL, "process",
 		      "process selector. Pass a pid or process name.",
 		       parse_process),
+	OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
+		    "Look for files with symbols relative to this directory"),
 	OPT_END()
 };
 
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index b513e40974f..1e67ab9c7eb 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -21,6 +21,7 @@
 #include "perf.h"
 
 #include "util/color.h"
+#include "util/evsel.h"
 #include "util/session.h"
 #include "util/symbol.h"
 #include "util/thread.h"
@@ -29,6 +30,7 @@
 #include "util/parse-options.h"
 #include "util/parse-events.h"
 #include "util/cpumap.h"
+#include "util/xyarray.h"
 
 #include "util/debug.h"
 
@@ -55,7 +57,7 @@
 #include <linux/unistd.h>
 #include <linux/types.h>
 
-static int			*fd[MAX_NR_CPUS][MAX_COUNTERS];
+#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
 
 static bool			system_wide			=  false;
 
@@ -66,11 +68,9 @@ static int			print_entries;
 
 static int			target_pid			=     -1;
 static int			target_tid			=     -1;
-static pid_t			*all_tids			=      NULL;
-static int			thread_num			=      0;
+static struct thread_map	*threads;
 static bool			inherit				=  false;
-static int			profile_cpu			=     -1;
-static int			nr_cpus				=      0;
+static struct cpu_map		*cpus;
 static int			realtime_prio			=      0;
 static bool			group				=  false;
 static unsigned int		page_size;
@@ -101,6 +101,7 @@ struct sym_entry		*sym_filter_entry		=   NULL;
 struct sym_entry		*sym_filter_entry_sched		=   NULL;
 static int			sym_pcnt_filter			=      5;
 static int			sym_counter			=      0;
+static struct perf_evsel	*sym_evsel			=   NULL;
 static int			display_weighted		=     -1;
 static const char		*cpu_list;
 
@@ -354,7 +355,7 @@ static void show_details(struct sym_entry *syme)
 		return;
 
 	symbol = sym_entry__symbol(syme);
-	printf("Showing %s for %s\n", event_name(sym_counter), symbol->name);
+	printf("Showing %s for %s\n", event_name(sym_evsel), symbol->name);
 	printf("  Events  Pcnt (>=%d%%)\n", sym_pcnt_filter);
 
 	pthread_mutex_lock(&syme->src->lock);
@@ -461,7 +462,8 @@ static void rb_insert_active_sym(struct rb_root *tree, struct sym_entry *se)
 static void print_sym_table(void)
 {
 	int printed = 0, j;
-	int counter, snap = !display_weighted ? sym_counter : 0;
+	struct perf_evsel *counter;
+	int snap = !display_weighted ? sym_counter : 0;
 	float samples_per_sec = samples/delay_secs;
 	float ksamples_per_sec = kernel_samples/delay_secs;
 	float us_samples_per_sec = (us_samples)/delay_secs;
@@ -533,7 +535,9 @@ static void print_sym_table(void)
 	}
 
 	if (nr_counters == 1 || !display_weighted) {
-		printf("%Ld", (u64)attrs[0].sample_period);
+		struct perf_evsel *first;
+		first = list_entry(evsel_list.next, struct perf_evsel, node);
+		printf("%Ld", first->attr.sample_period);
 		if (freq)
 			printf("Hz ");
 		else
@@ -541,9 +545,9 @@ static void print_sym_table(void)
 	}
 
 	if (!display_weighted)
-		printf("%s", event_name(sym_counter));
-	else for (counter = 0; counter < nr_counters; counter++) {
-		if (counter)
+		printf("%s", event_name(sym_evsel));
+	else list_for_each_entry(counter, &evsel_list, node) {
+		if (counter->idx)
 			printf("/");
 
 		printf("%s", event_name(counter));
@@ -558,13 +562,13 @@ static void print_sym_table(void)
 	else
 		printf(" (all");
 
-	if (profile_cpu != -1)
-		printf(", cpu: %d)\n", profile_cpu);
+	if (cpu_list)
+		printf(", CPU%s: %s)\n", cpus->nr > 1 ? "s" : "", cpu_list);
 	else {
 		if (target_tid != -1)
 			printf(")\n");
 		else
-			printf(", %d CPUs)\n", nr_cpus);
+			printf(", %d CPU%s)\n", cpus->nr, cpus->nr > 1 ? "s" : "");
 	}
 
 	printf("%-*.*s\n", win_width, win_width, graph_dotted_line);
@@ -740,7 +744,7 @@ static void print_mapped_keys(void)
 	fprintf(stdout, "\t[e]     display entries (lines).           \t(%d)\n", print_entries);
 
 	if (nr_counters > 1)
-		fprintf(stdout, "\t[E]     active event counter.              \t(%s)\n", event_name(sym_counter));
+		fprintf(stdout, "\t[E]     active event counter.              \t(%s)\n", event_name(sym_evsel));
 
 	fprintf(stdout, "\t[f]     profile display filter (count).    \t(%d)\n", count_filter);
 
@@ -827,19 +831,23 @@ static void handle_keypress(struct perf_session *session, int c)
 			break;
 		case 'E':
 			if (nr_counters > 1) {
-				int i;
-
 				fprintf(stderr, "\nAvailable events:");
-				for (i = 0; i < nr_counters; i++)
-					fprintf(stderr, "\n\t%d %s", i, event_name(i));
+
+				list_for_each_entry(sym_evsel, &evsel_list, node)
+					fprintf(stderr, "\n\t%d %s", sym_evsel->idx, event_name(sym_evsel));
 
 				prompt_integer(&sym_counter, "Enter details event counter");
 
 				if (sym_counter >= nr_counters) {
-					fprintf(stderr, "Sorry, no such event, using %s.\n", event_name(0));
+					sym_evsel = list_entry(evsel_list.next, struct perf_evsel, node);
 					sym_counter = 0;
+					fprintf(stderr, "Sorry, no such event, using %s.\n", event_name(sym_evsel));
 					sleep(1);
+					break;
 				}
+				list_for_each_entry(sym_evsel, &evsel_list, node)
+					if (sym_evsel->idx == sym_counter)
+						break;
 			} else sym_counter = 0;
 			break;
 		case 'f':
@@ -978,12 +986,13 @@ static int symbol_filter(struct map *map, struct symbol *sym)
 }
 
 static void event__process_sample(const event_t *self,
-				 struct perf_session *session, int counter)
+				  struct sample_data *sample,
+				  struct perf_session *session,
+				  struct perf_evsel *evsel)
 {
 	u64 ip = self->ip.ip;
 	struct sym_entry *syme;
 	struct addr_location al;
-	struct sample_data data;
 	struct machine *machine;
 	u8 origin = self->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
 
@@ -1026,7 +1035,7 @@ static void event__process_sample(const event_t *self,
 	if (self->header.misc & PERF_RECORD_MISC_EXACT_IP)
 		exact_samples++;
 
-	if (event__preprocess_sample(self, session, &al, &data,
+	if (event__preprocess_sample(self, session, &al, sample,
 				     symbol_filter) < 0 ||
 	    al.filtered)
 		return;
@@ -1072,9 +1081,9 @@ static void event__process_sample(const event_t *self,
 
 	syme = symbol__priv(al.sym);
 	if (!syme->skip) {
-		syme->count[counter]++;
+		syme->count[evsel->idx]++;
 		syme->origin = origin;
-		record_precise_ip(syme, counter, ip);
+		record_precise_ip(syme, evsel->idx, ip);
 		pthread_mutex_lock(&active_symbols_lock);
 		if (list_empty(&syme->node) || !syme->node.next)
 			__list_insert_active_sym(syme);
@@ -1083,12 +1092,24 @@ static void event__process_sample(const event_t *self,
 }
 
 struct mmap_data {
-	int			counter;
 	void			*base;
 	int			mask;
 	unsigned int		prev;
 };
 
+static int perf_evsel__alloc_mmap_per_thread(struct perf_evsel *evsel,
+					     int ncpus, int nthreads)
+{
+	evsel->priv = xyarray__new(ncpus, nthreads, sizeof(struct mmap_data));
+	return evsel->priv != NULL ? 0 : -ENOMEM;
+}
+
+static void perf_evsel__free_mmap(struct perf_evsel *evsel)
+{
+	xyarray__delete(evsel->priv);
+	evsel->priv = NULL;
+}
+
 static unsigned int mmap_read_head(struct mmap_data *md)
 {
 	struct perf_event_mmap_page *pc = md->base;
@@ -1101,11 +1122,15 @@ static unsigned int mmap_read_head(struct mmap_data *md)
 }
 
 static void perf_session__mmap_read_counter(struct perf_session *self,
-					    struct mmap_data *md)
+					    struct perf_evsel *evsel,
+					    int cpu, int thread_idx)
 {
+	struct xyarray *mmap_array = evsel->priv;
+	struct mmap_data *md = xyarray__entry(mmap_array, cpu, thread_idx);
 	unsigned int head = mmap_read_head(md);
 	unsigned int old = md->prev;
 	unsigned char *data = md->base + page_size;
+	struct sample_data sample;
 	int diff;
 
 	/*
@@ -1153,10 +1178,11 @@ static void perf_session__mmap_read_counter(struct perf_session *self,
 			event = &event_copy;
 		}
 
+		event__parse_sample(event, self, &sample);
 		if (event->header.type == PERF_RECORD_SAMPLE)
-			event__process_sample(event, self, md->counter);
+			event__process_sample(event, &sample, self, evsel);
 		else
-			event__process(event, self);
+			event__process(event, &sample, self);
 		old += size;
 	}
 
@@ -1164,37 +1190,39 @@ static void perf_session__mmap_read_counter(struct perf_session *self,
 }
 
 static struct pollfd *event_array;
-static struct mmap_data *mmap_array[MAX_NR_CPUS][MAX_COUNTERS];
 
 static void perf_session__mmap_read(struct perf_session *self)
 {
-	int i, counter, thread_index;
+	struct perf_evsel *counter;
+	int i, thread_index;
 
-	for (i = 0; i < nr_cpus; i++) {
-		for (counter = 0; counter < nr_counters; counter++)
+	for (i = 0; i < cpus->nr; i++) {
+		list_for_each_entry(counter, &evsel_list, node) {
 			for (thread_index = 0;
-				thread_index < thread_num;
+				thread_index < threads->nr;
 				thread_index++) {
 				perf_session__mmap_read_counter(self,
-					&mmap_array[i][counter][thread_index]);
+					counter, i, thread_index);
 			}
+		}
 	}
 }
 
 int nr_poll;
 int group_fd;
 
-static void start_counter(int i, int counter)
+static void start_counter(int i, struct perf_evsel *evsel)
 {
+	struct xyarray *mmap_array = evsel->priv;
+	struct mmap_data *mm;
 	struct perf_event_attr *attr;
-	int cpu;
+	int cpu = -1;
 	int thread_index;
 
-	cpu = profile_cpu;
-	if (target_tid == -1 && profile_cpu == -1)
-		cpu = cpumap[i];
+	if (target_tid == -1)
+		cpu = cpus->map[i];
 
-	attr = attrs + counter;
+	attr = &evsel->attr;
 
 	attr->sample_type	= PERF_SAMPLE_IP | PERF_SAMPLE_TID;
 
@@ -1207,16 +1235,18 @@ static void start_counter(int i, int counter)
 	attr->inherit		= (cpu < 0) && inherit;
 	attr->mmap		= 1;
 
-	for (thread_index = 0; thread_index < thread_num; thread_index++) {
+	for (thread_index = 0; thread_index < threads->nr; thread_index++) {
 try_again:
-		fd[i][counter][thread_index] = sys_perf_event_open(attr,
-				all_tids[thread_index], cpu, group_fd, 0);
+		FD(evsel, i, thread_index) = sys_perf_event_open(attr,
+				threads->map[thread_index], cpu, group_fd, 0);
 
-		if (fd[i][counter][thread_index] < 0) {
+		if (FD(evsel, i, thread_index) < 0) {
 			int err = errno;
 
 			if (err == EPERM || err == EACCES)
-				die("No permission - are you root?\n");
+				die("Permission error - are you root?\n"
+					"\t Consider tweaking"
+					" /proc/sys/kernel/perf_event_paranoid.\n");
 			/*
 			 * If it's cycles then fall back to hrtimer
 			 * based cpu-clock-tick sw counter, which
@@ -1233,30 +1263,30 @@ try_again:
 				goto try_again;
 			}
 			printf("\n");
-			error("perfcounter syscall returned with %d (%s)\n",
-					fd[i][counter][thread_index], strerror(err));
+			error("sys_perf_event_open() syscall returned with %d (%s).  /bin/dmesg may provide additional information.\n",
+					FD(evsel, i, thread_index), strerror(err));
 			die("No CONFIG_PERF_EVENTS=y kernel support configured?\n");
 			exit(-1);
 		}
-		assert(fd[i][counter][thread_index] >= 0);
-		fcntl(fd[i][counter][thread_index], F_SETFL, O_NONBLOCK);
+		assert(FD(evsel, i, thread_index) >= 0);
+		fcntl(FD(evsel, i, thread_index), F_SETFL, O_NONBLOCK);
 
 		/*
 		 * First counter acts as the group leader:
 		 */
 		if (group && group_fd == -1)
-			group_fd = fd[i][counter][thread_index];
+			group_fd = FD(evsel, i, thread_index);
 
-		event_array[nr_poll].fd = fd[i][counter][thread_index];
+		event_array[nr_poll].fd = FD(evsel, i, thread_index);
 		event_array[nr_poll].events = POLLIN;
 		nr_poll++;
 
-		mmap_array[i][counter][thread_index].counter = counter;
-		mmap_array[i][counter][thread_index].prev = 0;
-		mmap_array[i][counter][thread_index].mask = mmap_pages*page_size - 1;
-		mmap_array[i][counter][thread_index].base = mmap(NULL, (mmap_pages+1)*page_size,
-				PROT_READ, MAP_SHARED, fd[i][counter][thread_index], 0);
-		if (mmap_array[i][counter][thread_index].base == MAP_FAILED)
+		mm = xyarray__entry(mmap_array, i, thread_index);
+		mm->prev = 0;
+		mm->mask = mmap_pages*page_size - 1;
+		mm->base = mmap(NULL, (mmap_pages+1)*page_size,
+				PROT_READ, MAP_SHARED, FD(evsel, i, thread_index), 0);
+		if (mm->base == MAP_FAILED)
 			die("failed to mmap with %d (%s)\n", errno, strerror(errno));
 	}
 }
@@ -1264,13 +1294,13 @@ try_again:
 static int __cmd_top(void)
 {
 	pthread_t thread;
-	int i, counter;
-	int ret;
+	struct perf_evsel *counter;
+	int i, ret;
 	/*
 	 * FIXME: perf_session__new should allow passing a O_MMAP, so that all this
 	 * mmap reading, etc is encapsulated in it. Use O_WRONLY for now.
 	 */
-	struct perf_session *session = perf_session__new(NULL, O_WRONLY, false, false);
+	struct perf_session *session = perf_session__new(NULL, O_WRONLY, false, false, NULL);
 	if (session == NULL)
 		return -ENOMEM;
 
@@ -1279,9 +1309,9 @@ static int __cmd_top(void)
 	else
 		event__synthesize_threads(event__process, session);
 
-	for (i = 0; i < nr_cpus; i++) {
+	for (i = 0; i < cpus->nr; i++) {
 		group_fd = -1;
-		for (counter = 0; counter < nr_counters; counter++)
+		list_for_each_entry(counter, &evsel_list, node)
 			start_counter(i, counter);
 	}
 
@@ -1370,8 +1400,8 @@ static const struct option options[] = {
 
 int cmd_top(int argc, const char **argv, const char *prefix __used)
 {
-	int counter;
-	int i,j;
+	struct perf_evsel *pos;
+	int status = -ENOMEM;
 
 	page_size = sysconf(_SC_PAGE_SIZE);
 
@@ -1379,34 +1409,17 @@ int cmd_top(int argc, const char **argv, const char *prefix __used)
 	if (argc)
 		usage_with_options(top_usage, options);
 
-	if (target_pid != -1) {
+	if (target_pid != -1)
 		target_tid = target_pid;
-		thread_num = find_all_tid(target_pid, &all_tids);
-		if (thread_num <= 0) {
-			fprintf(stderr, "Can't find all threads of pid %d\n",
-				target_pid);
-			usage_with_options(top_usage, options);
-		}
-	} else {
-		all_tids=malloc(sizeof(pid_t));
-		if (!all_tids)
-			return -ENOMEM;
 
-		all_tids[0] = target_tid;
-		thread_num = 1;
+	threads = thread_map__new(target_pid, target_tid);
+	if (threads == NULL) {
+		pr_err("Problems finding threads of monitor\n");
+		usage_with_options(top_usage, options);
 	}
 
-	for (i = 0; i < MAX_NR_CPUS; i++) {
-		for (j = 0; j < MAX_COUNTERS; j++) {
-			fd[i][j] = malloc(sizeof(int)*thread_num);
-			mmap_array[i][j] = zalloc(
-				sizeof(struct mmap_data)*thread_num);
-			if (!fd[i][j] || !mmap_array[i][j])
-				return -ENOMEM;
-		}
-	}
-	event_array = malloc(
-		sizeof(struct pollfd)*MAX_NR_CPUS*MAX_COUNTERS*thread_num);
+	event_array = malloc((sizeof(struct pollfd) *
+			      MAX_NR_CPUS * MAX_COUNTERS * threads->nr));
 	if (!event_array)
 		return -ENOMEM;
 
@@ -1417,15 +1430,10 @@ int cmd_top(int argc, const char **argv, const char *prefix __used)
 		cpu_list = NULL;
 	}
 
-	if (!nr_counters)
-		nr_counters = 1;
-
-	symbol_conf.priv_size = (sizeof(struct sym_entry) +
-				 (nr_counters + 1) * sizeof(unsigned long));
-
-	symbol_conf.try_vmlinux_path = (symbol_conf.vmlinux_name == NULL);
-	if (symbol__init() < 0)
-		return -1;
+	if (!nr_counters && perf_evsel_list__create_default() < 0) {
+		pr_err("Not enough memory for event selector list\n");
+		return -ENOMEM;
+	}
 
 	if (delay_secs < 1)
 		delay_secs = 1;
@@ -1442,23 +1450,33 @@ int cmd_top(int argc, const char **argv, const char *prefix __used)
 		exit(EXIT_FAILURE);
 	}
 
-	/*
-	 * Fill in the ones not specifically initialized via -c:
-	 */
-	for (counter = 0; counter < nr_counters; counter++) {
-		if (attrs[counter].sample_period)
+	if (target_tid != -1)
+		cpus = cpu_map__dummy_new();
+	else
+		cpus = cpu_map__new(cpu_list);
+
+	if (cpus == NULL)
+		usage_with_options(top_usage, options);
+
+	list_for_each_entry(pos, &evsel_list, node) {
+		if (perf_evsel__alloc_mmap_per_thread(pos, cpus->nr, threads->nr) < 0 ||
+		    perf_evsel__alloc_fd(pos, cpus->nr, threads->nr) < 0)
+			goto out_free_fd;
+		/*
+		 * Fill in the ones not specifically initialized via -c:
+		 */
+		if (pos->attr.sample_period)
 			continue;
 
-		attrs[counter].sample_period = default_interval;
+		pos->attr.sample_period = default_interval;
 	}
 
-	if (target_tid != -1)
-		nr_cpus = 1;
-	else
-		nr_cpus = read_cpu_map(cpu_list);
+	symbol_conf.priv_size = (sizeof(struct sym_entry) +
+				 (nr_counters + 1) * sizeof(unsigned long));
 
-	if (nr_cpus < 1)
-		usage_with_options(top_usage, options);
+	symbol_conf.try_vmlinux_path = (symbol_conf.vmlinux_name == NULL);
+	if (symbol__init() < 0)
+		return -1;
 
 	get_term_dimensions(&winsize);
 	if (print_entries == 0) {
@@ -1466,5 +1484,10 @@ int cmd_top(int argc, const char **argv, const char *prefix __used)
 		signal(SIGWINCH, sig_winch_handler);
 	}
 
-	return __cmd_top();
+	status = __cmd_top();
+out_free_fd:
+	list_for_each_entry(pos, &evsel_list, node)
+		perf_evsel__free_mmap(pos);
+
+	return status;
 }
diff --git a/tools/perf/builtin.h b/tools/perf/builtin.h
index 921245b2858..c7798c7f24e 100644
--- a/tools/perf/builtin.h
+++ b/tools/perf/builtin.h
@@ -27,7 +27,7 @@ extern int cmd_report(int argc, const char **argv, const char *prefix);
 extern int cmd_stat(int argc, const char **argv, const char *prefix);
 extern int cmd_timechart(int argc, const char **argv, const char *prefix);
 extern int cmd_top(int argc, const char **argv, const char *prefix);
-extern int cmd_trace(int argc, const char **argv, const char *prefix);
+extern int cmd_script(int argc, const char **argv, const char *prefix);
 extern int cmd_version(int argc, const char **argv, const char *prefix);
 extern int cmd_probe(int argc, const char **argv, const char *prefix);
 extern int cmd_kmem(int argc, const char **argv, const char *prefix);
diff --git a/tools/perf/command-list.txt b/tools/perf/command-list.txt
index 949d77fc0b9..16b5088cf8f 100644
--- a/tools/perf/command-list.txt
+++ b/tools/perf/command-list.txt
@@ -16,7 +16,7 @@ perf-report			mainporcelain common
 perf-stat			mainporcelain common
 perf-timechart			mainporcelain common
 perf-top			mainporcelain common
-perf-trace			mainporcelain common
+perf-script			mainporcelain common
 perf-probe			mainporcelain common
 perf-kmem			mainporcelain common
 perf-lock			mainporcelain common
diff --git a/tools/perf/feature-tests.mak b/tools/perf/feature-tests.mak
index b253db634f0..b041ca67a2c 100644
--- a/tools/perf/feature-tests.mak
+++ b/tools/perf/feature-tests.mak
@@ -9,8 +9,8 @@ endef
 ifndef NO_DWARF
 define SOURCE_DWARF
 #include <dwarf.h>
-#include <libdw.h>
-#include <version.h>
+#include <elfutils/libdw.h>
+#include <elfutils/version.h>
 #ifndef _ELFUTILS_PREREQ
 #error
 #endif
diff --git a/tools/perf/perf.c b/tools/perf/perf.c
index cdd6c03f1e1..5b1ecd66bb3 100644
--- a/tools/perf/perf.c
+++ b/tools/perf/perf.c
@@ -286,6 +286,8 @@ static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
 	status = p->fn(argc, argv, prefix);
 	exit_browser(status);
 
+	perf_evsel_list__delete();
+
 	if (status)
 		return status & 0xff;
 
@@ -323,7 +325,7 @@ static void handle_internal_command(int argc, const char **argv)
 		{ "top",	cmd_top,	0 },
 		{ "annotate",	cmd_annotate,	0 },
 		{ "version",	cmd_version,	0 },
-		{ "trace",	cmd_trace,	0 },
+		{ "script",	cmd_script,	0 },
 		{ "sched",	cmd_sched,	0 },
 		{ "probe",	cmd_probe,	0 },
 		{ "kmem",	cmd_kmem,	0 },
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/Context.c b/tools/perf/scripts/perl/Perf-Trace-Util/Context.c
index 01a64ad693f..790ceba6ad3 100644
--- a/tools/perf/scripts/perl/Perf-Trace-Util/Context.c
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/Context.c
@@ -8,7 +8,7 @@
 
 #line 1 "Context.xs"
 /*
- * Context.xs.  XS interfaces for perf trace.
+ * Context.xs.  XS interfaces for perf script.
  *
  * Copyright (C) 2009 Tom Zanussi <tzanussi@gmail.com>
  *
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/Context.xs b/tools/perf/scripts/perl/Perf-Trace-Util/Context.xs
index 549cf0467d3..c1e2ed1ed34 100644
--- a/tools/perf/scripts/perl/Perf-Trace-Util/Context.xs
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/Context.xs
@@ -1,5 +1,5 @@
 /*
- * Context.xs.  XS interfaces for perf trace.
+ * Context.xs.  XS interfaces for perf script.
  *
  * Copyright (C) 2009 Tom Zanussi <tzanussi@gmail.com>
  *
@@ -23,7 +23,7 @@
 #include "perl.h"
 #include "XSUB.h"
 #include "../../../perf.h"
-#include "../../../util/trace-event.h"
+#include "../../../util/script-event.h"
 
 MODULE = Perf::Trace::Context		PACKAGE = Perf::Trace::Context
 PROTOTYPES: ENABLE
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/README b/tools/perf/scripts/perl/Perf-Trace-Util/README
index 9a970763079..2f0c7f3043e 100644
--- a/tools/perf/scripts/perl/Perf-Trace-Util/README
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/README
@@ -1,7 +1,7 @@
 Perf-Trace-Util version 0.01
 ============================
 
-This module contains utility functions for use with perf trace.
+This module contains utility functions for use with perf script.
 
 Core.pm and Util.pm are pure Perl modules; Core.pm contains routines
 that the core perf support for Perl calls on and should always be
@@ -33,7 +33,7 @@ After you do that:
 
 INSTALLATION
 
-Building perf with perf trace Perl scripting should install this
+Building perf with perf script Perl scripting should install this
 module in the right place.
 
 You should make sure libperl and ExtUtils/Embed.pm are installed first
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Context.pm b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Context.pm
index 6c7f3659cb1..4e2f6039ac9 100644
--- a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Context.pm
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Context.pm
@@ -34,7 +34,7 @@ Perf::Trace::Context - Perl extension for accessing functions in perf.
 
 =head1 SEE ALSO
 
-Perf (trace) documentation
+Perf (script) documentation
 
 =head1 AUTHOR
 
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Core.pm b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Core.pm
index 9df376a9f62..9158458d3ee 100644
--- a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Core.pm
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Core.pm
@@ -163,7 +163,7 @@ sub dump_symbolic_fields
 __END__
 =head1 NAME
 
-Perf::Trace::Core - Perl extension for perf trace
+Perf::Trace::Core - Perl extension for perf script
 
 =head1 SYNOPSIS
 
@@ -171,7 +171,7 @@ Perf::Trace::Core - Perl extension for perf trace
 
 =head1 SEE ALSO
 
-Perf (trace) documentation
+Perf (script) documentation
 
 =head1 AUTHOR
 
diff --git a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm
index d94b40c8ac8..05350011462 100644
--- a/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm
+++ b/tools/perf/scripts/perl/Perf-Trace-Util/lib/Perf/Trace/Util.pm
@@ -65,7 +65,7 @@ sub clear_term
 __END__
 =head1 NAME
 
-Perf::Trace::Util - Perl extension for perf trace
+Perf::Trace::Util - Perl extension for perf script
 
 =head1 SYNOPSIS
 
@@ -73,7 +73,7 @@ Perf::Trace::Util - Perl extension for perf trace
 
 =head1 SEE ALSO
 
-Perf (trace) documentation
+Perf (script) documentation
 
 =head1 AUTHOR
 
diff --git a/tools/perf/scripts/perl/bin/failed-syscalls-record b/tools/perf/scripts/perl/bin/failed-syscalls-record
index eb5846bcb56..8104895a7b6 100644
--- a/tools/perf/scripts/perl/bin/failed-syscalls-record
+++ b/tools/perf/scripts/perl/bin/failed-syscalls-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e raw_syscalls:sys_exit $@
+perf record -e raw_syscalls:sys_exit $@
diff --git a/tools/perf/scripts/perl/bin/failed-syscalls-report b/tools/perf/scripts/perl/bin/failed-syscalls-report
index 4028d92dc4a..9f83cc1ad8b 100644
--- a/tools/perf/scripts/perl/bin/failed-syscalls-report
+++ b/tools/perf/scripts/perl/bin/failed-syscalls-report
@@ -7,4 +7,4 @@ if [ $# -gt 0 ] ; then
 	shift
     fi
 fi
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/perl/failed-syscalls.pl $comm
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/perl/failed-syscalls.pl $comm
diff --git a/tools/perf/scripts/perl/bin/rw-by-file-record b/tools/perf/scripts/perl/bin/rw-by-file-record
index 5bfaae5a6cb..33efc8673aa 100644
--- a/tools/perf/scripts/perl/bin/rw-by-file-record
+++ b/tools/perf/scripts/perl/bin/rw-by-file-record
@@ -1,3 +1,3 @@
 #!/bin/bash
-perf record -a -e syscalls:sys_enter_read -e syscalls:sys_enter_write $@
+perf record -e syscalls:sys_enter_read -e syscalls:sys_enter_write $@
 
diff --git a/tools/perf/scripts/perl/bin/rw-by-file-report b/tools/perf/scripts/perl/bin/rw-by-file-report
index ba25f4d41fb..77200b3f310 100644
--- a/tools/perf/scripts/perl/bin/rw-by-file-report
+++ b/tools/perf/scripts/perl/bin/rw-by-file-report
@@ -7,7 +7,4 @@ if [ $# -lt 1 ] ; then
 fi
 comm=$1
 shift
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/perl/rw-by-file.pl $comm
-
-
-
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/perl/rw-by-file.pl $comm
diff --git a/tools/perf/scripts/perl/bin/rw-by-pid-record b/tools/perf/scripts/perl/bin/rw-by-pid-record
index 6e0b2f7755a..7cb9db23044 100644
--- a/tools/perf/scripts/perl/bin/rw-by-pid-record
+++ b/tools/perf/scripts/perl/bin/rw-by-pid-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
+perf record -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
diff --git a/tools/perf/scripts/perl/bin/rw-by-pid-report b/tools/perf/scripts/perl/bin/rw-by-pid-report
index 641a3f5d085..a27b9f311f9 100644
--- a/tools/perf/scripts/perl/bin/rw-by-pid-report
+++ b/tools/perf/scripts/perl/bin/rw-by-pid-report
@@ -1,6 +1,3 @@
 #!/bin/bash
 # description: system-wide r/w activity
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/perl/rw-by-pid.pl
-
-
-
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/perl/rw-by-pid.pl
diff --git a/tools/perf/scripts/perl/bin/rwtop-record b/tools/perf/scripts/perl/bin/rwtop-record
index 6e0b2f7755a..7cb9db23044 100644
--- a/tools/perf/scripts/perl/bin/rwtop-record
+++ b/tools/perf/scripts/perl/bin/rwtop-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
+perf record -e syscalls:sys_enter_read -e syscalls:sys_exit_read -e syscalls:sys_enter_write -e syscalls:sys_exit_write $@
diff --git a/tools/perf/scripts/perl/bin/rwtop-report b/tools/perf/scripts/perl/bin/rwtop-report
index 4918dba7702..83e11ec2e19 100644
--- a/tools/perf/scripts/perl/bin/rwtop-report
+++ b/tools/perf/scripts/perl/bin/rwtop-report
@@ -17,7 +17,4 @@ if [ "$n_args" -gt 0 ] ; then
     interval=$1
     shift
 fi
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/perl/rwtop.pl $interval
-
-
-
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/perl/rwtop.pl $interval
diff --git a/tools/perf/scripts/perl/bin/wakeup-latency-record b/tools/perf/scripts/perl/bin/wakeup-latency-record
index 9f2acaaae9f..464251a1bd7 100644
--- a/tools/perf/scripts/perl/bin/wakeup-latency-record
+++ b/tools/perf/scripts/perl/bin/wakeup-latency-record
@@ -1,5 +1,5 @@
 #!/bin/bash
-perf record -a -e sched:sched_switch -e sched:sched_wakeup $@
+perf record -e sched:sched_switch -e sched:sched_wakeup $@
 
 
 
diff --git a/tools/perf/scripts/perl/bin/wakeup-latency-report b/tools/perf/scripts/perl/bin/wakeup-latency-report
index 49052ebcb63..889e8130cca 100644
--- a/tools/perf/scripts/perl/bin/wakeup-latency-report
+++ b/tools/perf/scripts/perl/bin/wakeup-latency-report
@@ -1,6 +1,3 @@
 #!/bin/bash
 # description: system-wide min/max/avg wakeup latency
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/perl/wakeup-latency.pl
-
-
-
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/perl/wakeup-latency.pl
diff --git a/tools/perf/scripts/perl/bin/workqueue-stats-record b/tools/perf/scripts/perl/bin/workqueue-stats-record
index 85301f2471f..8edda9078d5 100644
--- a/tools/perf/scripts/perl/bin/workqueue-stats-record
+++ b/tools/perf/scripts/perl/bin/workqueue-stats-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e workqueue:workqueue_creation -e workqueue:workqueue_destruction -e workqueue:workqueue_execution -e workqueue:workqueue_insertion $@
+perf record -e workqueue:workqueue_creation -e workqueue:workqueue_destruction -e workqueue:workqueue_execution -e workqueue:workqueue_insertion $@
diff --git a/tools/perf/scripts/perl/bin/workqueue-stats-report b/tools/perf/scripts/perl/bin/workqueue-stats-report
index df0c65f4ca9..6d91411d248 100644
--- a/tools/perf/scripts/perl/bin/workqueue-stats-report
+++ b/tools/perf/scripts/perl/bin/workqueue-stats-report
@@ -1,7 +1,3 @@
 #!/bin/bash
 # description: workqueue stats (ins/exe/create/destroy)
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/perl/workqueue-stats.pl
-
-
-
-
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/perl/workqueue-stats.pl
diff --git a/tools/perf/scripts/perl/check-perf-trace.pl b/tools/perf/scripts/perl/check-perf-trace.pl
index 4e7dc0a407a..4e7076c2061 100644
--- a/tools/perf/scripts/perl/check-perf-trace.pl
+++ b/tools/perf/scripts/perl/check-perf-trace.pl
@@ -1,4 +1,4 @@
-# perf trace event handlers, generated by perf trace -g perl
+# perf script event handlers, generated by perf script -g perl
 # (c) 2009, Tom Zanussi <tzanussi@gmail.com>
 # Licensed under the terms of the GNU GPL License version 2
 
diff --git a/tools/perf/scripts/perl/rw-by-file.pl b/tools/perf/scripts/perl/rw-by-file.pl
index 2a39097687b..74844ee2be3 100644
--- a/tools/perf/scripts/perl/rw-by-file.pl
+++ b/tools/perf/scripts/perl/rw-by-file.pl
@@ -18,7 +18,7 @@ use lib "./Perf-Trace-Util/lib";
 use Perf::Trace::Core;
 use Perf::Trace::Util;
 
-my $usage = "perf trace -s rw-by-file.pl <comm>\n";
+my $usage = "perf script -s rw-by-file.pl <comm>\n";
 
 my $for_comm = shift or die $usage;
 
diff --git a/tools/perf/scripts/perl/workqueue-stats.pl b/tools/perf/scripts/perl/workqueue-stats.pl
index b84b12699b7..a8eaff5119e 100644
--- a/tools/perf/scripts/perl/workqueue-stats.pl
+++ b/tools/perf/scripts/perl/workqueue-stats.pl
@@ -10,7 +10,7 @@
 #     workqueue:workqueue_destruction -e workqueue:workqueue_execution
 #     -e workqueue:workqueue_insertion
 #
-#   perf trace -p -s tools/perf/scripts/perl/workqueue-stats.pl
+#   perf script -p -s tools/perf/scripts/perl/workqueue-stats.pl
 
 use 5.010000;
 use strict;
diff --git a/tools/perf/scripts/python/Perf-Trace-Util/Context.c b/tools/perf/scripts/python/Perf-Trace-Util/Context.c
index 957085dd5d8..315067b8f55 100644
--- a/tools/perf/scripts/python/Perf-Trace-Util/Context.c
+++ b/tools/perf/scripts/python/Perf-Trace-Util/Context.c
@@ -1,5 +1,5 @@
 /*
- * Context.c.  Python interfaces for perf trace.
+ * Context.c.  Python interfaces for perf script.
  *
  * Copyright (C) 2010 Tom Zanussi <tzanussi@gmail.com>
  *
diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py
index aad7525bca1..de7211e4fa4 100644
--- a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py
+++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Core.py
@@ -1,4 +1,4 @@
-# Core.py - Python extension for perf trace, core functions
+# Core.py - Python extension for perf script, core functions
 #
 # Copyright (C) 2010 by Tom Zanussi <tzanussi@gmail.com>
 #
diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py
index ae9a56e43e0..fdd92f69905 100644
--- a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py
+++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/SchedGui.py
@@ -1,4 +1,4 @@
-# SchedGui.py - Python extension for perf trace, basic GUI code for
+# SchedGui.py - Python extension for perf script, basic GUI code for
 #		traces drawing and overview.
 #
 # Copyright (C) 2010 by Frederic Weisbecker <fweisbec@gmail.com>
diff --git a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py
index 13cc02b5893..15c8400240f 100644
--- a/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py
+++ b/tools/perf/scripts/python/Perf-Trace-Util/lib/Perf/Trace/Util.py
@@ -1,4 +1,4 @@
-# Util.py - Python extension for perf trace, miscellaneous utility code
+# Util.py - Python extension for perf script, miscellaneous utility code
 #
 # Copyright (C) 2010 by Tom Zanussi <tzanussi@gmail.com>
 #
diff --git a/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record b/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record
index eb5846bcb56..8104895a7b6 100644
--- a/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record
+++ b/tools/perf/scripts/python/bin/failed-syscalls-by-pid-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e raw_syscalls:sys_exit $@
+perf record -e raw_syscalls:sys_exit $@
diff --git a/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report b/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report
index 03587021463..fda5096d0cb 100644
--- a/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report
+++ b/tools/perf/scripts/python/bin/failed-syscalls-by-pid-report
@@ -7,4 +7,4 @@ if [ $# -gt 0 ] ; then
 	shift
     fi
 fi
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/python/failed-syscalls-by-pid.py $comm
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/python/failed-syscalls-by-pid.py $comm
diff --git a/tools/perf/scripts/python/bin/futex-contention-record b/tools/perf/scripts/python/bin/futex-contention-record
index 5ecbb433caf..b1495c9a9b2 100644
--- a/tools/perf/scripts/python/bin/futex-contention-record
+++ b/tools/perf/scripts/python/bin/futex-contention-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e syscalls:sys_enter_futex -e syscalls:sys_exit_futex $@
+perf record -e syscalls:sys_enter_futex -e syscalls:sys_exit_futex $@
diff --git a/tools/perf/scripts/python/bin/futex-contention-report b/tools/perf/scripts/python/bin/futex-contention-report
index c8268138fb7..6c44271091a 100644
--- a/tools/perf/scripts/python/bin/futex-contention-report
+++ b/tools/perf/scripts/python/bin/futex-contention-report
@@ -1,4 +1,4 @@
 #!/bin/bash
 # description: futext contention measurement
 
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/python/futex-contention.py
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/python/futex-contention.py
diff --git a/tools/perf/scripts/python/bin/netdev-times-record b/tools/perf/scripts/python/bin/netdev-times-record
index d931a828126..558754b840a 100644
--- a/tools/perf/scripts/python/bin/netdev-times-record
+++ b/tools/perf/scripts/python/bin/netdev-times-record
@@ -1,5 +1,5 @@
 #!/bin/bash
-perf record -a -e net:net_dev_xmit -e net:net_dev_queue		\
+perf record -e net:net_dev_xmit -e net:net_dev_queue		\
 		-e net:netif_receive_skb -e net:netif_rx		\
 		-e skb:consume_skb -e skb:kfree_skb			\
 		-e skb:skb_copy_datagram_iovec -e napi:napi_poll	\
diff --git a/tools/perf/scripts/python/bin/netdev-times-report b/tools/perf/scripts/python/bin/netdev-times-report
index 4ad361b3124..8f759291da8 100644
--- a/tools/perf/scripts/python/bin/netdev-times-report
+++ b/tools/perf/scripts/python/bin/netdev-times-report
@@ -2,4 +2,4 @@
 # description: display a process of packet and processing time
 # args: [tx] [rx] [dev=] [debug]
 
-perf trace -s "$PERF_EXEC_PATH"/scripts/python/netdev-times.py $@
+perf script -s "$PERF_EXEC_PATH"/scripts/python/netdev-times.py $@
diff --git a/tools/perf/scripts/python/bin/sched-migration-record b/tools/perf/scripts/python/bin/sched-migration-record
index 17a3e9bd9e8..7493fddbe99 100644
--- a/tools/perf/scripts/python/bin/sched-migration-record
+++ b/tools/perf/scripts/python/bin/sched-migration-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -m 16384 -a -e sched:sched_wakeup -e sched:sched_wakeup_new -e sched:sched_switch -e sched:sched_migrate_task $@
+perf record -m 16384 -e sched:sched_wakeup -e sched:sched_wakeup_new -e sched:sched_switch -e sched:sched_migrate_task $@
diff --git a/tools/perf/scripts/python/bin/sched-migration-report b/tools/perf/scripts/python/bin/sched-migration-report
index df1791f07c2..68b037a1849 100644
--- a/tools/perf/scripts/python/bin/sched-migration-report
+++ b/tools/perf/scripts/python/bin/sched-migration-report
@@ -1,3 +1,3 @@
 #!/bin/bash
 # description: sched migration overview
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/python/sched-migration.py
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/python/sched-migration.py
diff --git a/tools/perf/scripts/python/bin/sctop-record b/tools/perf/scripts/python/bin/sctop-record
index 1fc5998b721..4efbfaa7f6a 100644
--- a/tools/perf/scripts/python/bin/sctop-record
+++ b/tools/perf/scripts/python/bin/sctop-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e raw_syscalls:sys_enter $@
+perf record -e raw_syscalls:sys_enter $@
diff --git a/tools/perf/scripts/python/bin/sctop-report b/tools/perf/scripts/python/bin/sctop-report
index 36b409c05e5..c32db294124 100644
--- a/tools/perf/scripts/python/bin/sctop-report
+++ b/tools/perf/scripts/python/bin/sctop-report
@@ -21,4 +21,4 @@ elif [ "$n_args" -gt 0 ] ; then
     interval=$1
     shift
 fi
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/python/sctop.py $comm $interval
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/python/sctop.py $comm $interval
diff --git a/tools/perf/scripts/python/bin/syscall-counts-by-pid-record b/tools/perf/scripts/python/bin/syscall-counts-by-pid-record
index 1fc5998b721..4efbfaa7f6a 100644
--- a/tools/perf/scripts/python/bin/syscall-counts-by-pid-record
+++ b/tools/perf/scripts/python/bin/syscall-counts-by-pid-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e raw_syscalls:sys_enter $@
+perf record -e raw_syscalls:sys_enter $@
diff --git a/tools/perf/scripts/python/bin/syscall-counts-by-pid-report b/tools/perf/scripts/python/bin/syscall-counts-by-pid-report
index 4eb88c9fc83..16eb8d65c54 100644
--- a/tools/perf/scripts/python/bin/syscall-counts-by-pid-report
+++ b/tools/perf/scripts/python/bin/syscall-counts-by-pid-report
@@ -7,4 +7,4 @@ if [ $# -gt 0 ] ; then
 	shift
     fi
 fi
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/python/syscall-counts-by-pid.py $comm
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/python/syscall-counts-by-pid.py $comm
diff --git a/tools/perf/scripts/python/bin/syscall-counts-record b/tools/perf/scripts/python/bin/syscall-counts-record
index 1fc5998b721..4efbfaa7f6a 100644
--- a/tools/perf/scripts/python/bin/syscall-counts-record
+++ b/tools/perf/scripts/python/bin/syscall-counts-record
@@ -1,2 +1,2 @@
 #!/bin/bash
-perf record -a -e raw_syscalls:sys_enter $@
+perf record -e raw_syscalls:sys_enter $@
diff --git a/tools/perf/scripts/python/bin/syscall-counts-report b/tools/perf/scripts/python/bin/syscall-counts-report
index cb2f9c5cf17..0f0e9d453bb 100644
--- a/tools/perf/scripts/python/bin/syscall-counts-report
+++ b/tools/perf/scripts/python/bin/syscall-counts-report
@@ -7,4 +7,4 @@ if [ $# -gt 0 ] ; then
 	shift
     fi
 fi
-perf trace $@ -s "$PERF_EXEC_PATH"/scripts/python/syscall-counts.py $comm
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/python/syscall-counts.py $comm
diff --git a/tools/perf/scripts/python/check-perf-trace.py b/tools/perf/scripts/python/check-perf-trace.py
index d9f7893e315..4647a7694cf 100644
--- a/tools/perf/scripts/python/check-perf-trace.py
+++ b/tools/perf/scripts/python/check-perf-trace.py
@@ -1,4 +1,4 @@
-# perf trace event handlers, generated by perf trace -g python
+# perf script event handlers, generated by perf script -g python
 # (c) 2010, Tom Zanussi <tzanussi@gmail.com>
 # Licensed under the terms of the GNU GPL License version 2
 #
diff --git a/tools/perf/scripts/python/failed-syscalls-by-pid.py b/tools/perf/scripts/python/failed-syscalls-by-pid.py
index acd7848717b..85805fac411 100644
--- a/tools/perf/scripts/python/failed-syscalls-by-pid.py
+++ b/tools/perf/scripts/python/failed-syscalls-by-pid.py
@@ -15,7 +15,7 @@ from perf_trace_context import *
 from Core import *
 from Util import *
 
-usage = "perf trace -s syscall-counts-by-pid.py [comm|pid]\n";
+usage = "perf script -s syscall-counts-by-pid.py [comm|pid]\n";
 
 for_comm = None
 for_pid = None
diff --git a/tools/perf/scripts/python/sched-migration.py b/tools/perf/scripts/python/sched-migration.py
index b934383c336..74d55ec08ae 100644
--- a/tools/perf/scripts/python/sched-migration.py
+++ b/tools/perf/scripts/python/sched-migration.py
@@ -4,7 +4,7 @@
 #
 # Copyright (C) 2010 Frederic Weisbecker <fweisbec@gmail.com>
 #
-# perf trace event handlers have been generated by perf trace -g python
+# perf script event handlers have been generated by perf script -g python
 #
 # This software is distributed under the terms of the GNU General
 # Public License ("GPL") version 2 as published by the Free Software
diff --git a/tools/perf/scripts/python/sctop.py b/tools/perf/scripts/python/sctop.py
index 7a6ec2c7d8a..42c267e292f 100644
--- a/tools/perf/scripts/python/sctop.py
+++ b/tools/perf/scripts/python/sctop.py
@@ -17,7 +17,7 @@ from perf_trace_context import *
 from Core import *
 from Util import *
 
-usage = "perf trace -s sctop.py [comm] [interval]\n";
+usage = "perf script -s sctop.py [comm] [interval]\n";
 
 for_comm = None
 default_interval = 3
diff --git a/tools/perf/scripts/python/syscall-counts-by-pid.py b/tools/perf/scripts/python/syscall-counts-by-pid.py
index d1ee3ec10cf..c64d1c55d74 100644
--- a/tools/perf/scripts/python/syscall-counts-by-pid.py
+++ b/tools/perf/scripts/python/syscall-counts-by-pid.py
@@ -14,7 +14,7 @@ from perf_trace_context import *
 from Core import *
 from Util import syscall_name
 
-usage = "perf trace -s syscall-counts-by-pid.py [comm]\n";
+usage = "perf script -s syscall-counts-by-pid.py [comm]\n";
 
 for_comm = None
 for_pid = None
diff --git a/tools/perf/scripts/python/syscall-counts.py b/tools/perf/scripts/python/syscall-counts.py
index ea183dc82d2..b435d3f188e 100644
--- a/tools/perf/scripts/python/syscall-counts.py
+++ b/tools/perf/scripts/python/syscall-counts.py
@@ -15,7 +15,7 @@ from perf_trace_context import *
 from Core import *
 from Util import syscall_name
 
-usage = "perf trace -s syscall-counts.py [comm]\n";
+usage = "perf script -s syscall-counts.py [comm]\n";
 
 for_comm = None
 
diff --git a/tools/perf/util/build-id.c b/tools/perf/util/build-id.c
index e437edb7241..deffb8c9607 100644
--- a/tools/perf/util/build-id.c
+++ b/tools/perf/util/build-id.c
@@ -14,7 +14,9 @@
 #include <linux/kernel.h>
 #include "debug.h"
 
-static int build_id__mark_dso_hit(event_t *event, struct perf_session *session)
+static int build_id__mark_dso_hit(event_t *event,
+				  struct sample_data *sample __used,
+				  struct perf_session *session)
 {
 	struct addr_location al;
 	u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
@@ -35,7 +37,8 @@ static int build_id__mark_dso_hit(event_t *event, struct perf_session *session)
 	return 0;
 }
 
-static int event__exit_del_thread(event_t *self, struct perf_session *session)
+static int event__exit_del_thread(event_t *self, struct sample_data *sample __used,
+				  struct perf_session *session)
 {
 	struct thread *thread = perf_session__findnew(session, self->fork.tid);
 
diff --git a/tools/perf/util/cpumap.c b/tools/perf/util/cpumap.c
index 0f9b8d7a7d7..3ccaa104338 100644
--- a/tools/perf/util/cpumap.c
+++ b/tools/perf/util/cpumap.c
@@ -4,32 +4,53 @@
 #include <assert.h>
 #include <stdio.h>
 
-int cpumap[MAX_NR_CPUS];
-
-static int default_cpu_map(void)
+static struct cpu_map *cpu_map__default_new(void)
 {
-	int nr_cpus, i;
+	struct cpu_map *cpus;
+	int nr_cpus;
 
 	nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
-	assert(nr_cpus <= MAX_NR_CPUS);
-	assert((int)nr_cpus >= 0);
+	if (nr_cpus < 0)
+		return NULL;
+
+	cpus = malloc(sizeof(*cpus) + nr_cpus * sizeof(int));
+	if (cpus != NULL) {
+		int i;
+		for (i = 0; i < nr_cpus; ++i)
+			cpus->map[i] = i;
 
-	for (i = 0; i < nr_cpus; ++i)
-		cpumap[i] = i;
+		cpus->nr = nr_cpus;
+	}
 
-	return nr_cpus;
+	return cpus;
 }
 
-static int read_all_cpu_map(void)
+static struct cpu_map *cpu_map__trim_new(int nr_cpus, int *tmp_cpus)
 {
+	size_t payload_size = nr_cpus * sizeof(int);
+	struct cpu_map *cpus = malloc(sizeof(*cpus) + payload_size);
+
+	if (cpus != NULL) {
+		cpus->nr = nr_cpus;
+		memcpy(cpus->map, tmp_cpus, payload_size);
+	}
+
+	return cpus;
+}
+
+static struct cpu_map *cpu_map__read_all_cpu_map(void)
+{
+	struct cpu_map *cpus = NULL;
 	FILE *onlnf;
 	int nr_cpus = 0;
+	int *tmp_cpus = NULL, *tmp;
+	int max_entries = 0;
 	int n, cpu, prev;
 	char sep;
 
 	onlnf = fopen("/sys/devices/system/cpu/online", "r");
 	if (!onlnf)
-		return default_cpu_map();
+		return cpu_map__default_new();
 
 	sep = 0;
 	prev = -1;
@@ -38,12 +59,28 @@ static int read_all_cpu_map(void)
 		if (n <= 0)
 			break;
 		if (prev >= 0) {
-			assert(nr_cpus + cpu - prev - 1 < MAX_NR_CPUS);
+			int new_max = nr_cpus + cpu - prev - 1;
+
+			if (new_max >= max_entries) {
+				max_entries = new_max + MAX_NR_CPUS / 2;
+				tmp = realloc(tmp_cpus, max_entries * sizeof(int));
+				if (tmp == NULL)
+					goto out_free_tmp;
+				tmp_cpus = tmp;
+			}
+
 			while (++prev < cpu)
-				cpumap[nr_cpus++] = prev;
+				tmp_cpus[nr_cpus++] = prev;
+		}
+		if (nr_cpus == max_entries) {
+			max_entries += MAX_NR_CPUS;
+			tmp = realloc(tmp_cpus, max_entries * sizeof(int));
+			if (tmp == NULL)
+				goto out_free_tmp;
+			tmp_cpus = tmp;
 		}
-		assert (nr_cpus < MAX_NR_CPUS);
-		cpumap[nr_cpus++] = cpu;
+
+		tmp_cpus[nr_cpus++] = cpu;
 		if (n == 2 && sep == '-')
 			prev = cpu;
 		else
@@ -51,24 +88,31 @@ static int read_all_cpu_map(void)
 		if (n == 1 || sep == '\n')
 			break;
 	}
-	fclose(onlnf);
-	if (nr_cpus > 0)
-		return nr_cpus;
 
-	return default_cpu_map();
+	if (nr_cpus > 0)
+		cpus = cpu_map__trim_new(nr_cpus, tmp_cpus);
+	else
+		cpus = cpu_map__default_new();
+out_free_tmp:
+	free(tmp_cpus);
+	fclose(onlnf);
+	return cpus;
 }
 
-int read_cpu_map(const char *cpu_list)
+struct cpu_map *cpu_map__new(const char *cpu_list)
 {
+	struct cpu_map *cpus = NULL;
 	unsigned long start_cpu, end_cpu = 0;
 	char *p = NULL;
 	int i, nr_cpus = 0;
+	int *tmp_cpus = NULL, *tmp;
+	int max_entries = 0;
 
 	if (!cpu_list)
-		return read_all_cpu_map();
+		return cpu_map__read_all_cpu_map();
 
 	if (!isdigit(*cpu_list))
-		goto invalid;
+		goto out;
 
 	while (isdigit(*cpu_list)) {
 		p = NULL;
@@ -94,21 +138,42 @@ int read_cpu_map(const char *cpu_list)
 		for (; start_cpu <= end_cpu; start_cpu++) {
 			/* check for duplicates */
 			for (i = 0; i < nr_cpus; i++)
-				if (cpumap[i] == (int)start_cpu)
+				if (tmp_cpus[i] == (int)start_cpu)
 					goto invalid;
 
-			assert(nr_cpus < MAX_NR_CPUS);
-			cpumap[nr_cpus++] = (int)start_cpu;
+			if (nr_cpus == max_entries) {
+				max_entries += MAX_NR_CPUS;
+				tmp = realloc(tmp_cpus, max_entries * sizeof(int));
+				if (tmp == NULL)
+					goto invalid;
+				tmp_cpus = tmp;
+			}
+			tmp_cpus[nr_cpus++] = (int)start_cpu;
 		}
 		if (*p)
 			++p;
 
 		cpu_list = p;
 	}
-	if (nr_cpus > 0)
-		return nr_cpus;
 
-	return default_cpu_map();
+	if (nr_cpus > 0)
+		cpus = cpu_map__trim_new(nr_cpus, tmp_cpus);
+	else
+		cpus = cpu_map__default_new();
 invalid:
-	return -1;
+	free(tmp_cpus);
+out:
+	return cpus;
+}
+
+struct cpu_map *cpu_map__dummy_new(void)
+{
+	struct cpu_map *cpus = malloc(sizeof(*cpus) + sizeof(int));
+
+	if (cpus != NULL) {
+		cpus->nr = 1;
+		cpus->map[0] = -1;
+	}
+
+	return cpus;
 }
diff --git a/tools/perf/util/cpumap.h b/tools/perf/util/cpumap.h
index 3e60f56e490..f7a4f42f630 100644
--- a/tools/perf/util/cpumap.h
+++ b/tools/perf/util/cpumap.h
@@ -1,7 +1,13 @@
 #ifndef __PERF_CPUMAP_H
 #define __PERF_CPUMAP_H
 
-extern int read_cpu_map(const char *cpu_list);
-extern int cpumap[];
+struct cpu_map {
+	int nr;
+	int map[];
+};
+
+struct cpu_map *cpu_map__new(const char *cpu_list);
+struct cpu_map *cpu_map__dummy_new(void);
+void *cpu_map__delete(struct cpu_map *map);
 
 #endif /* __PERF_CPUMAP_H */
diff --git a/tools/perf/util/debug.c b/tools/perf/util/debug.c
index c8d81b00089..01bbe8ecec3 100644
--- a/tools/perf/util/debug.c
+++ b/tools/perf/util/debug.c
@@ -46,20 +46,16 @@ int dump_printf(const char *fmt, ...)
 	return ret;
 }
 
-static int dump_printf_color(const char *fmt, const char *color, ...)
+#ifdef NO_NEWT_SUPPORT
+void ui__warning(const char *format, ...)
 {
 	va_list args;
-	int ret = 0;
 
-	if (dump_trace) {
-		va_start(args, color);
-		ret = color_vfprintf(stdout, color, fmt, args);
-		va_end(args);
-	}
-
-	return ret;
+	va_start(args, format);
+	vfprintf(stderr, format, args);
+	va_end(args);
 }
-
+#endif
 
 void trace_event(event_t *event)
 {
@@ -70,29 +66,29 @@ void trace_event(event_t *event)
 	if (!dump_trace)
 		return;
 
-	dump_printf(".");
-	dump_printf_color("\n. ... raw event: size %d bytes\n", color,
-			  event->header.size);
+	printf(".");
+	color_fprintf(stdout, color, "\n. ... raw event: size %d bytes\n",
+		      event->header.size);
 
 	for (i = 0; i < event->header.size; i++) {
 		if ((i & 15) == 0) {
-			dump_printf(".");
-			dump_printf_color("  %04x: ", color, i);
+			printf(".");
+			color_fprintf(stdout, color, "  %04x: ", i);
 		}
 
-		dump_printf_color(" %02x", color, raw_event[i]);
+		color_fprintf(stdout, color, " %02x", raw_event[i]);
 
 		if (((i & 15) == 15) || i == event->header.size-1) {
-			dump_printf_color("  ", color);
+			color_fprintf(stdout, color, "  ");
 			for (j = 0; j < 15-(i & 15); j++)
-				dump_printf_color("   ", color);
+				color_fprintf(stdout, color, "   ");
 			for (j = i & ~15; j <= i; j++) {
-				dump_printf_color("%c", color,
-						isprint(raw_event[j]) ?
-						raw_event[j] : '.');
+				color_fprintf(stdout, color, "%c",
+					      isprint(raw_event[j]) ?
+					      raw_event[j] : '.');
 			}
-			dump_printf_color("\n", color);
+			color_fprintf(stdout, color, "\n");
 		}
 	}
-	dump_printf(".\n");
+	printf(".\n");
 }
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
index 7b514082bba..ca35fd66b5d 100644
--- a/tools/perf/util/debug.h
+++ b/tools/perf/util/debug.h
@@ -35,4 +35,6 @@ int ui_helpline__show_help(const char *format, va_list ap);
 #include "ui/progress.h"
 #endif
 
+void ui__warning(const char *format, ...) __attribute__((format(printf, 1, 2)));
+
 #endif	/* __PERF_DEBUG_H */
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index dab9e754a28..2302ec051bb 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -7,7 +7,7 @@
 #include "strlist.h"
 #include "thread.h"
 
-const char *event__name[] = {
+static const char *event__name[] = {
 	[0]			 = "TOTAL",
 	[PERF_RECORD_MMAP]	 = "MMAP",
 	[PERF_RECORD_LOST]	 = "LOST",
@@ -22,13 +22,31 @@ const char *event__name[] = {
 	[PERF_RECORD_HEADER_EVENT_TYPE]	 = "EVENT_TYPE",
 	[PERF_RECORD_HEADER_TRACING_DATA]	 = "TRACING_DATA",
 	[PERF_RECORD_HEADER_BUILD_ID]	 = "BUILD_ID",
+	[PERF_RECORD_FINISHED_ROUND]	 = "FINISHED_ROUND",
 };
 
-static pid_t event__synthesize_comm(pid_t pid, int full,
+const char *event__get_event_name(unsigned int id)
+{
+	if (id >= ARRAY_SIZE(event__name))
+		return "INVALID";
+	if (!event__name[id])
+		return "UNKNOWN";
+	return event__name[id];
+}
+
+static struct sample_data synth_sample = {
+	.pid	   = -1,
+	.tid	   = -1,
+	.time	   = -1,
+	.stream_id = -1,
+	.cpu	   = -1,
+	.period	   = 1,
+};
+
+static pid_t event__synthesize_comm(event_t *event, pid_t pid, int full,
 				    event__handler_t process,
 				    struct perf_session *session)
 {
-	event_t ev;
 	char filename[PATH_MAX];
 	char bf[BUFSIZ];
 	FILE *fp;
@@ -49,34 +67,39 @@ out_race:
 		return 0;
 	}
 
-	memset(&ev.comm, 0, sizeof(ev.comm));
-	while (!ev.comm.comm[0] || !ev.comm.pid) {
-		if (fgets(bf, sizeof(bf), fp) == NULL)
-			goto out_failure;
+	memset(&event->comm, 0, sizeof(event->comm));
+
+	while (!event->comm.comm[0] || !event->comm.pid) {
+		if (fgets(bf, sizeof(bf), fp) == NULL) {
+			pr_warning("couldn't get COMM and pgid, malformed %s\n", filename);
+			goto out;
+		}
 
 		if (memcmp(bf, "Name:", 5) == 0) {
 			char *name = bf + 5;
 			while (*name && isspace(*name))
 				++name;
 			size = strlen(name) - 1;
-			memcpy(ev.comm.comm, name, size++);
+			memcpy(event->comm.comm, name, size++);
 		} else if (memcmp(bf, "Tgid:", 5) == 0) {
 			char *tgids = bf + 5;
 			while (*tgids && isspace(*tgids))
 				++tgids;
-			tgid = ev.comm.pid = atoi(tgids);
+			tgid = event->comm.pid = atoi(tgids);
 		}
 	}
 
-	ev.comm.header.type = PERF_RECORD_COMM;
+	event->comm.header.type = PERF_RECORD_COMM;
 	size = ALIGN(size, sizeof(u64));
-	ev.comm.header.size = sizeof(ev.comm) - (sizeof(ev.comm.comm) - size);
-
+	memset(event->comm.comm + size, 0, session->id_hdr_size);
+	event->comm.header.size = (sizeof(event->comm) -
+				(sizeof(event->comm.comm) - size) +
+				session->id_hdr_size);
 	if (!full) {
-		ev.comm.tid = pid;
+		event->comm.tid = pid;
 
-		process(&ev, session);
-		goto out_fclose;
+		process(event, &synth_sample, session);
+		goto out;
 	}
 
 	snprintf(filename, sizeof(filename), "/proc/%d/task", pid);
@@ -91,22 +114,19 @@ out_race:
 		if (*end)
 			continue;
 
-		ev.comm.tid = pid;
+		event->comm.tid = pid;
 
-		process(&ev, session);
+		process(event, &synth_sample, session);
 	}
-	closedir(tasks);
 
-out_fclose:
+	closedir(tasks);
+out:
 	fclose(fp);
-	return tgid;
 
-out_failure:
-	pr_warning("couldn't get COMM and pgid, malformed %s\n", filename);
-	return -1;
+	return tgid;
 }
 
-static int event__synthesize_mmap_events(pid_t pid, pid_t tgid,
+static int event__synthesize_mmap_events(event_t *event, pid_t pid, pid_t tgid,
 					 event__handler_t process,
 					 struct perf_session *session)
 {
@@ -124,29 +144,25 @@ static int event__synthesize_mmap_events(pid_t pid, pid_t tgid,
 		return -1;
 	}
 
+	event->header.type = PERF_RECORD_MMAP;
+	/*
+	 * Just like the kernel, see __perf_event_mmap in kernel/perf_event.c
+	 */
+	event->header.misc = PERF_RECORD_MISC_USER;
+
 	while (1) {
 		char bf[BUFSIZ], *pbf = bf;
-		event_t ev = {
-			.header = {
-				.type = PERF_RECORD_MMAP,
-				/*
-				 * Just like the kernel, see __perf_event_mmap
-				 * in kernel/perf_event.c
-				 */
-				.misc = PERF_RECORD_MISC_USER,
-			 },
-		};
 		int n;
 		size_t size;
 		if (fgets(bf, sizeof(bf), fp) == NULL)
 			break;
 
 		/* 00400000-0040c000 r-xp 00000000 fd:01 41038  /bin/cat */
-		n = hex2u64(pbf, &ev.mmap.start);
+		n = hex2u64(pbf, &event->mmap.start);
 		if (n < 0)
 			continue;
 		pbf += n + 1;
-		n = hex2u64(pbf, &ev.mmap.len);
+		n = hex2u64(pbf, &event->mmap.len);
 		if (n < 0)
 			continue;
 		pbf += n + 3;
@@ -161,19 +177,21 @@ static int event__synthesize_mmap_events(pid_t pid, pid_t tgid,
 				continue;
 
 			pbf += 3;
-			n = hex2u64(pbf, &ev.mmap.pgoff);
+			n = hex2u64(pbf, &event->mmap.pgoff);
 
 			size = strlen(execname);
 			execname[size - 1] = '\0'; /* Remove \n */
-			memcpy(ev.mmap.filename, execname, size);
+			memcpy(event->mmap.filename, execname, size);
 			size = ALIGN(size, sizeof(u64));
-			ev.mmap.len -= ev.mmap.start;
-			ev.mmap.header.size = (sizeof(ev.mmap) -
-					       (sizeof(ev.mmap.filename) - size));
-			ev.mmap.pid = tgid;
-			ev.mmap.tid = pid;
-
-			process(&ev, session);
+			event->mmap.len -= event->mmap.start;
+			event->mmap.header.size = (sizeof(event->mmap) -
+					        (sizeof(event->mmap.filename) - size));
+			memset(event->mmap.filename + size, 0, session->id_hdr_size);
+			event->mmap.header.size += session->id_hdr_size;
+			event->mmap.pid = tgid;
+			event->mmap.tid = pid;
+
+			process(event, &synth_sample, session);
 		}
 	}
 
@@ -187,20 +205,27 @@ int event__synthesize_modules(event__handler_t process,
 {
 	struct rb_node *nd;
 	struct map_groups *kmaps = &machine->kmaps;
-	u16 misc;
+	event_t *event = zalloc(sizeof(event->mmap) + session->id_hdr_size);
+
+	if (event == NULL) {
+		pr_debug("Not enough memory synthesizing mmap event "
+			 "for kernel modules\n");
+		return -1;
+	}
+
+	event->header.type = PERF_RECORD_MMAP;
 
 	/*
 	 * kernel uses 0 for user space maps, see kernel/perf_event.c
 	 * __perf_event_mmap
 	 */
 	if (machine__is_host(machine))
-		misc = PERF_RECORD_MISC_KERNEL;
+		event->header.misc = PERF_RECORD_MISC_KERNEL;
 	else
-		misc = PERF_RECORD_MISC_GUEST_KERNEL;
+		event->header.misc = PERF_RECORD_MISC_GUEST_KERNEL;
 
 	for (nd = rb_first(&kmaps->maps[MAP__FUNCTION]);
 	     nd; nd = rb_next(nd)) {
-		event_t ev;
 		size_t size;
 		struct map *pos = rb_entry(nd, struct map, rb_node);
 
@@ -208,39 +233,78 @@ int event__synthesize_modules(event__handler_t process,
 			continue;
 
 		size = ALIGN(pos->dso->long_name_len + 1, sizeof(u64));
-		memset(&ev, 0, sizeof(ev));
-		ev.mmap.header.misc = misc;
-		ev.mmap.header.type = PERF_RECORD_MMAP;
-		ev.mmap.header.size = (sizeof(ev.mmap) -
-				        (sizeof(ev.mmap.filename) - size));
-		ev.mmap.start = pos->start;
-		ev.mmap.len   = pos->end - pos->start;
-		ev.mmap.pid   = machine->pid;
-
-		memcpy(ev.mmap.filename, pos->dso->long_name,
+		event->mmap.header.type = PERF_RECORD_MMAP;
+		event->mmap.header.size = (sizeof(event->mmap) -
+				        (sizeof(event->mmap.filename) - size));
+		memset(event->mmap.filename + size, 0, session->id_hdr_size);
+		event->mmap.header.size += session->id_hdr_size;
+		event->mmap.start = pos->start;
+		event->mmap.len   = pos->end - pos->start;
+		event->mmap.pid   = machine->pid;
+
+		memcpy(event->mmap.filename, pos->dso->long_name,
 		       pos->dso->long_name_len + 1);
-		process(&ev, session);
+		process(event, &synth_sample, session);
 	}
 
+	free(event);
 	return 0;
 }
 
-int event__synthesize_thread(pid_t pid, event__handler_t process,
-			     struct perf_session *session)
+static int __event__synthesize_thread(event_t *comm_event, event_t *mmap_event,
+				      pid_t pid, event__handler_t process,
+				      struct perf_session *session)
 {
-	pid_t tgid = event__synthesize_comm(pid, 1, process, session);
+	pid_t tgid = event__synthesize_comm(comm_event, pid, 1, process,
+					    session);
 	if (tgid == -1)
 		return -1;
-	return event__synthesize_mmap_events(pid, tgid, process, session);
+	return event__synthesize_mmap_events(mmap_event, pid, tgid,
+					     process, session);
+}
+
+int event__synthesize_thread(pid_t pid, event__handler_t process,
+			     struct perf_session *session)
+{
+	event_t *comm_event, *mmap_event;
+	int err = -1;
+
+	comm_event = malloc(sizeof(comm_event->comm) + session->id_hdr_size);
+	if (comm_event == NULL)
+		goto out;
+
+	mmap_event = malloc(sizeof(mmap_event->mmap) + session->id_hdr_size);
+	if (mmap_event == NULL)
+		goto out_free_comm;
+
+	err = __event__synthesize_thread(comm_event, mmap_event, pid,
+					 process, session);
+	free(mmap_event);
+out_free_comm:
+	free(comm_event);
+out:
+	return err;
 }
 
-void event__synthesize_threads(event__handler_t process,
-			       struct perf_session *session)
+int event__synthesize_threads(event__handler_t process,
+			      struct perf_session *session)
 {
 	DIR *proc;
 	struct dirent dirent, *next;
+	event_t *comm_event, *mmap_event;
+	int err = -1;
+
+	comm_event = malloc(sizeof(comm_event->comm) + session->id_hdr_size);
+	if (comm_event == NULL)
+		goto out;
+
+	mmap_event = malloc(sizeof(mmap_event->mmap) + session->id_hdr_size);
+	if (mmap_event == NULL)
+		goto out_free_comm;
 
 	proc = opendir("/proc");
+	if (proc == NULL)
+		goto out_free_mmap;
 
 	while (!readdir_r(proc, &dirent, &next) && next) {
 		char *end;
@@ -249,10 +313,18 @@ void event__synthesize_threads(event__handler_t process,
 		if (*end) /* only interested in proper numerical dirents */
 			continue;
 
-		event__synthesize_thread(pid, process, session);
+		__event__synthesize_thread(comm_event, mmap_event, pid,
+					   process, session);
 	}
 
 	closedir(proc);
+	err = 0;
+out_free_mmap:
+	free(mmap_event);
+out_free_comm:
+	free(comm_event);
+out:
+	return err;
 }
 
 struct process_symbol_args {
@@ -260,7 +332,8 @@ struct process_symbol_args {
 	u64	   start;
 };
 
-static int find_symbol_cb(void *arg, const char *name, char type, u64 start)
+static int find_symbol_cb(void *arg, const char *name, char type,
+			  u64 start, u64 end __used)
 {
 	struct process_symbol_args *args = arg;
 
@@ -286,18 +359,20 @@ int event__synthesize_kernel_mmap(event__handler_t process,
 	char path[PATH_MAX];
 	char name_buff[PATH_MAX];
 	struct map *map;
-
-	event_t ev = {
-		.header = {
-			.type = PERF_RECORD_MMAP,
-		},
-	};
+	int err;
 	/*
 	 * We should get this from /sys/kernel/sections/.text, but till that is
 	 * available use this, and after it is use this as a fallback for older
 	 * kernels.
 	 */
 	struct process_symbol_args args = { .name = symbol_name, };
+	event_t *event = zalloc(sizeof(event->mmap) + session->id_hdr_size);
+
+	if (event == NULL) {
+		pr_debug("Not enough memory synthesizing mmap event "
+			 "for kernel modules\n");
+		return -1;
+	}
 
 	mmap_name = machine__mmap_name(machine, name_buff, sizeof(name_buff));
 	if (machine__is_host(machine)) {
@@ -305,10 +380,10 @@ int event__synthesize_kernel_mmap(event__handler_t process,
 		 * kernel uses PERF_RECORD_MISC_USER for user space maps,
 		 * see kernel/perf_event.c __perf_event_mmap
 		 */
-		ev.header.misc = PERF_RECORD_MISC_KERNEL;
+		event->header.misc = PERF_RECORD_MISC_KERNEL;
 		filename = "/proc/kallsyms";
 	} else {
-		ev.header.misc = PERF_RECORD_MISC_GUEST_KERNEL;
+		event->header.misc = PERF_RECORD_MISC_GUEST_KERNEL;
 		if (machine__is_default_guest(machine))
 			filename = (char *) symbol_conf.default_guest_kallsyms;
 		else {
@@ -321,17 +396,21 @@ int event__synthesize_kernel_mmap(event__handler_t process,
 		return -ENOENT;
 
 	map = machine->vmlinux_maps[MAP__FUNCTION];
-	size = snprintf(ev.mmap.filename, sizeof(ev.mmap.filename),
+	size = snprintf(event->mmap.filename, sizeof(event->mmap.filename),
 			"%s%s", mmap_name, symbol_name) + 1;
 	size = ALIGN(size, sizeof(u64));
-	ev.mmap.header.size = (sizeof(ev.mmap) -
-			(sizeof(ev.mmap.filename) - size));
-	ev.mmap.pgoff = args.start;
-	ev.mmap.start = map->start;
-	ev.mmap.len   = map->end - ev.mmap.start;
-	ev.mmap.pid   = machine->pid;
-
-	return process(&ev, session);
+	event->mmap.header.type = PERF_RECORD_MMAP;
+	event->mmap.header.size = (sizeof(event->mmap) -
+			(sizeof(event->mmap.filename) - size) + session->id_hdr_size);
+	event->mmap.pgoff = args.start;
+	event->mmap.start = map->start;
+	event->mmap.len   = map->end - event->mmap.start;
+	event->mmap.pid   = machine->pid;
+
+	err = process(event, &synth_sample, session);
+	free(event);
+
+	return err;
 }
 
 static void thread__comm_adjust(struct thread *self, struct hists *hists)
@@ -361,7 +440,8 @@ static int thread__set_comm_adjust(struct thread *self, const char *comm,
 	return 0;
 }
 
-int event__process_comm(event_t *self, struct perf_session *session)
+int event__process_comm(event_t *self, struct sample_data *sample __used,
+			struct perf_session *session)
 {
 	struct thread *thread = perf_session__findnew(session, self->comm.tid);
 
@@ -376,7 +456,8 @@ int event__process_comm(event_t *self, struct perf_session *session)
 	return 0;
 }
 
-int event__process_lost(event_t *self, struct perf_session *session)
+int event__process_lost(event_t *self, struct sample_data *sample __used,
+			struct perf_session *session)
 {
 	dump_printf(": id:%Ld: lost:%Ld\n", self->lost.id, self->lost.lost);
 	session->hists.stats.total_lost += self->lost.lost;
@@ -392,7 +473,7 @@ static void event_set_kernel_mmap_len(struct map **maps, event_t *self)
 	 * a zero sized synthesized MMAP event for the kernel.
 	 */
 	if (maps[MAP__FUNCTION]->end == 0)
-		maps[MAP__FUNCTION]->end = ~0UL;
+		maps[MAP__FUNCTION]->end = ~0ULL;
 }
 
 static int event__process_kernel_mmap(event_t *self,
@@ -485,7 +566,8 @@ out_problem:
 	return -1;
 }
 
-int event__process_mmap(event_t *self, struct perf_session *session)
+int event__process_mmap(event_t *self, struct sample_data *sample __used,
+			struct perf_session *session)
 {
 	struct machine *machine;
 	struct thread *thread;
@@ -526,7 +608,8 @@ out_problem:
 	return 0;
 }
 
-int event__process_task(event_t *self, struct perf_session *session)
+int event__process_task(event_t *self, struct sample_data *sample __used,
+			struct perf_session *session)
 {
 	struct thread *thread = perf_session__findnew(session, self->fork.tid);
 	struct thread *parent = perf_session__findnew(session, self->fork.ptid);
@@ -548,18 +631,19 @@ int event__process_task(event_t *self, struct perf_session *session)
 	return 0;
 }
 
-int event__process(event_t *event, struct perf_session *session)
+int event__process(event_t *event, struct sample_data *sample,
+		   struct perf_session *session)
 {
 	switch (event->header.type) {
 	case PERF_RECORD_COMM:
-		event__process_comm(event, session);
+		event__process_comm(event, sample, session);
 		break;
 	case PERF_RECORD_MMAP:
-		event__process_mmap(event, session);
+		event__process_mmap(event, sample, session);
 		break;
 	case PERF_RECORD_FORK:
 	case PERF_RECORD_EXIT:
-		event__process_task(event, session);
+		event__process_task(event, sample, session);
 		break;
 	default:
 		break;
@@ -674,32 +758,8 @@ int event__preprocess_sample(const event_t *self, struct perf_session *session,
 			     symbol_filter_t filter)
 {
 	u8 cpumode = self->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
-	struct thread *thread;
-
-	event__parse_sample(self, session->sample_type, data);
-
-	dump_printf("(IP, %d): %d/%d: %#Lx period: %Ld cpu:%d\n",
-		    self->header.misc, data->pid, data->tid, data->ip,
-		    data->period, data->cpu);
-
-	if (session->sample_type & PERF_SAMPLE_CALLCHAIN) {
-		unsigned int i;
-
-		dump_printf("... chain: nr:%Lu\n", data->callchain->nr);
+	struct thread *thread = perf_session__findnew(session, self->ip.pid);
 
-		if (!ip_callchain__valid(data->callchain, self)) {
-			pr_debug("call-chain problem with event, "
-				 "skipping it.\n");
-			goto out_filtered;
-		}
-
-		if (dump_trace) {
-			for (i = 0; i < data->callchain->nr; i++)
-				dump_printf("..... %2d: %016Lx\n",
-					    i, data->callchain->ips[i]);
-		}
-	}
-	thread = perf_session__findnew(session, self->ip.pid);
 	if (thread == NULL)
 		return -1;
 
@@ -766,9 +826,65 @@ out_filtered:
 	return 0;
 }
 
-int event__parse_sample(const event_t *event, u64 type, struct sample_data *data)
+static int event__parse_id_sample(const event_t *event,
+				  struct perf_session *session,
+				  struct sample_data *sample)
 {
-	const u64 *array = event->sample.array;
+	const u64 *array;
+	u64 type;
+
+	sample->cpu = sample->pid = sample->tid = -1;
+	sample->stream_id = sample->id = sample->time = -1ULL;
+
+	if (!session->sample_id_all)
+		return 0;
+
+	array = event->sample.array;
+	array += ((event->header.size -
+		   sizeof(event->header)) / sizeof(u64)) - 1;
+	type = session->sample_type;
+
+	if (type & PERF_SAMPLE_CPU) {
+		u32 *p = (u32 *)array;
+		sample->cpu = *p;
+		array--;
+	}
+
+	if (type & PERF_SAMPLE_STREAM_ID) {
+		sample->stream_id = *array;
+		array--;
+	}
+
+	if (type & PERF_SAMPLE_ID) {
+		sample->id = *array;
+		array--;
+	}
+
+	if (type & PERF_SAMPLE_TIME) {
+		sample->time = *array;
+		array--;
+	}
+
+	if (type & PERF_SAMPLE_TID) {
+		u32 *p = (u32 *)array;
+		sample->pid = p[0];
+		sample->tid = p[1];
+	}
+
+	return 0;
+}
+
+int event__parse_sample(const event_t *event, struct perf_session *session,
+			struct sample_data *data)
+{
+	const u64 *array;
+	u64 type;
+
+	if (event->header.type != PERF_RECORD_SAMPLE)
+		return event__parse_id_sample(event, session, data);
+
+	array = event->sample.array;
+	type = session->sample_type;
 
 	if (type & PERF_SAMPLE_IP) {
 		data->ip = event->ip.ip;
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index 8e790dae702..2b7e91902f1 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -85,6 +85,7 @@ struct build_id_event {
 };
 
 enum perf_user_event_type { /* above any possible kernel type */
+	PERF_RECORD_USER_TYPE_START		= 64,
 	PERF_RECORD_HEADER_ATTR			= 64,
 	PERF_RECORD_HEADER_EVENT_TYPE		= 65,
 	PERF_RECORD_HEADER_TRACING_DATA		= 66,
@@ -135,12 +136,15 @@ void event__print_totals(void);
 
 struct perf_session;
 
-typedef int (*event__handler_t)(event_t *event, struct perf_session *session);
+typedef int (*event__handler_synth_t)(event_t *event, 
+				      struct perf_session *session);
+typedef int (*event__handler_t)(event_t *event, struct sample_data *sample,
+				struct perf_session *session);
 
 int event__synthesize_thread(pid_t pid, event__handler_t process,
 			     struct perf_session *session);
-void event__synthesize_threads(event__handler_t process,
-			       struct perf_session *session);
+int event__synthesize_threads(event__handler_t process,
+			      struct perf_session *session);
 int event__synthesize_kernel_mmap(event__handler_t process,
 				struct perf_session *session,
 				struct machine *machine,
@@ -150,18 +154,24 @@ int event__synthesize_modules(event__handler_t process,
 			      struct perf_session *session,
 			      struct machine *machine);
 
-int event__process_comm(event_t *self, struct perf_session *session);
-int event__process_lost(event_t *self, struct perf_session *session);
-int event__process_mmap(event_t *self, struct perf_session *session);
-int event__process_task(event_t *self, struct perf_session *session);
-int event__process(event_t *event, struct perf_session *session);
+int event__process_comm(event_t *self, struct sample_data *sample,
+			struct perf_session *session);
+int event__process_lost(event_t *self, struct sample_data *sample,
+			struct perf_session *session);
+int event__process_mmap(event_t *self, struct sample_data *sample,
+			struct perf_session *session);
+int event__process_task(event_t *self, struct sample_data *sample,
+			struct perf_session *session);
+int event__process(event_t *event, struct sample_data *sample,
+		   struct perf_session *session);
 
 struct addr_location;
 int event__preprocess_sample(const event_t *self, struct perf_session *session,
 			     struct addr_location *al, struct sample_data *data,
 			     symbol_filter_t filter);
-int event__parse_sample(const event_t *event, u64 type, struct sample_data *data);
+int event__parse_sample(const event_t *event, struct perf_session *session,
+			struct sample_data *sample);
 
-extern const char *event__name[];
+const char *event__get_event_name(unsigned int id);
 
 #endif /* __PERF_RECORD_H */
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
new file mode 100644
index 00000000000..c95267e63c5
--- /dev/null
+++ b/tools/perf/util/evsel.c
@@ -0,0 +1,186 @@
+#include "evsel.h"
+#include "../perf.h"
+#include "util.h"
+#include "cpumap.h"
+#include "thread.h"
+
+#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y))
+
+struct perf_evsel *perf_evsel__new(u32 type, u64 config, int idx)
+{
+	struct perf_evsel *evsel = zalloc(sizeof(*evsel));
+
+	if (evsel != NULL) {
+		evsel->idx	   = idx;
+		evsel->attr.type   = type;
+		evsel->attr.config = config;
+		INIT_LIST_HEAD(&evsel->node);
+	}
+
+	return evsel;
+}
+
+int perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads)
+{
+	evsel->fd = xyarray__new(ncpus, nthreads, sizeof(int));
+	return evsel->fd != NULL ? 0 : -ENOMEM;
+}
+
+int perf_evsel__alloc_counts(struct perf_evsel *evsel, int ncpus)
+{
+	evsel->counts = zalloc((sizeof(*evsel->counts) +
+				(ncpus * sizeof(struct perf_counts_values))));
+	return evsel->counts != NULL ? 0 : -ENOMEM;
+}
+
+void perf_evsel__free_fd(struct perf_evsel *evsel)
+{
+	xyarray__delete(evsel->fd);
+	evsel->fd = NULL;
+}
+
+void perf_evsel__close_fd(struct perf_evsel *evsel, int ncpus, int nthreads)
+{
+	int cpu, thread;
+
+	for (cpu = 0; cpu < ncpus; cpu++)
+		for (thread = 0; thread < nthreads; ++thread) {
+			close(FD(evsel, cpu, thread));
+			FD(evsel, cpu, thread) = -1;
+		}
+}
+
+void perf_evsel__delete(struct perf_evsel *evsel)
+{
+	assert(list_empty(&evsel->node));
+	xyarray__delete(evsel->fd);
+	free(evsel);
+}
+
+int __perf_evsel__read_on_cpu(struct perf_evsel *evsel,
+			      int cpu, int thread, bool scale)
+{
+	struct perf_counts_values count;
+	size_t nv = scale ? 3 : 1;
+
+	if (FD(evsel, cpu, thread) < 0)
+		return -EINVAL;
+
+	if (evsel->counts == NULL && perf_evsel__alloc_counts(evsel, cpu + 1) < 0)
+		return -ENOMEM;
+
+	if (readn(FD(evsel, cpu, thread), &count, nv * sizeof(u64)) < 0)
+		return -errno;
+
+	if (scale) {
+		if (count.run == 0)
+			count.val = 0;
+		else if (count.run < count.ena)
+			count.val = (u64)((double)count.val * count.ena / count.run + 0.5);
+	} else
+		count.ena = count.run = 0;
+
+	evsel->counts->cpu[cpu] = count;
+	return 0;
+}
+
+int __perf_evsel__read(struct perf_evsel *evsel,
+		       int ncpus, int nthreads, bool scale)
+{
+	size_t nv = scale ? 3 : 1;
+	int cpu, thread;
+	struct perf_counts_values *aggr = &evsel->counts->aggr, count;
+
+	aggr->val = 0;
+
+	for (cpu = 0; cpu < ncpus; cpu++) {
+		for (thread = 0; thread < nthreads; thread++) {
+			if (FD(evsel, cpu, thread) < 0)
+				continue;
+
+			if (readn(FD(evsel, cpu, thread),
+				  &count, nv * sizeof(u64)) < 0)
+				return -errno;
+
+			aggr->val += count.val;
+			if (scale) {
+				aggr->ena += count.ena;
+				aggr->run += count.run;
+			}
+		}
+	}
+
+	evsel->counts->scaled = 0;
+	if (scale) {
+		if (aggr->run == 0) {
+			evsel->counts->scaled = -1;
+			aggr->val = 0;
+			return 0;
+		}
+
+		if (aggr->run < aggr->ena) {
+			evsel->counts->scaled = 1;
+			aggr->val = (u64)((double)aggr->val * aggr->ena / aggr->run + 0.5);
+		}
+	} else
+		aggr->ena = aggr->run = 0;
+
+	return 0;
+}
+
+int perf_evsel__open_per_cpu(struct perf_evsel *evsel, struct cpu_map *cpus)
+{
+	int cpu;
+
+	if (evsel->fd == NULL && perf_evsel__alloc_fd(evsel, cpus->nr, 1) < 0)
+		return -1;
+
+	for (cpu = 0; cpu < cpus->nr; cpu++) {
+		FD(evsel, cpu, 0) = sys_perf_event_open(&evsel->attr, -1,
+							cpus->map[cpu], -1, 0);
+		if (FD(evsel, cpu, 0) < 0)
+			goto out_close;
+	}
+
+	return 0;
+
+out_close:
+	while (--cpu >= 0) {
+		close(FD(evsel, cpu, 0));
+		FD(evsel, cpu, 0) = -1;
+	}
+	return -1;
+}
+
+int perf_evsel__open_per_thread(struct perf_evsel *evsel, struct thread_map *threads)
+{
+	int thread;
+
+	if (evsel->fd == NULL && perf_evsel__alloc_fd(evsel, 1, threads->nr))
+		return -1;
+
+	for (thread = 0; thread < threads->nr; thread++) {
+		FD(evsel, 0, thread) = sys_perf_event_open(&evsel->attr,
+							   threads->map[thread], -1, -1, 0);
+		if (FD(evsel, 0, thread) < 0)
+			goto out_close;
+	}
+
+	return 0;
+
+out_close:
+	while (--thread >= 0) {
+		close(FD(evsel, 0, thread));
+		FD(evsel, 0, thread) = -1;
+	}
+	return -1;
+}
+
+int perf_evsel__open(struct perf_evsel *evsel, 
+		     struct cpu_map *cpus, struct thread_map *threads)
+{
+	if (threads == NULL)
+		return perf_evsel__open_per_cpu(evsel, cpus);
+
+	return perf_evsel__open_per_thread(evsel, threads);
+}
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
new file mode 100644
index 00000000000..a0ccd69c3fc
--- /dev/null
+++ b/tools/perf/util/evsel.h
@@ -0,0 +1,115 @@
+#ifndef __PERF_EVSEL_H
+#define __PERF_EVSEL_H 1
+
+#include <linux/list.h>
+#include <stdbool.h>
+#include "../../../include/linux/perf_event.h"
+#include "types.h"
+#include "xyarray.h"
+ 
+struct perf_counts_values {
+	union {
+		struct {
+			u64 val;
+			u64 ena;
+			u64 run;
+		};
+		u64 values[3];
+	};
+};
+
+struct perf_counts {
+	s8		   	  scaled;
+	struct perf_counts_values aggr;
+	struct perf_counts_values cpu[];
+};
+
+struct perf_evsel {
+	struct list_head	node;
+	struct perf_event_attr	attr;
+	char			*filter;
+	struct xyarray		*fd;
+	struct perf_counts	*counts;
+	int			idx;
+	void			*priv;
+};
+
+struct cpu_map;
+struct thread_map;
+
+struct perf_evsel *perf_evsel__new(u32 type, u64 config, int idx);
+void perf_evsel__delete(struct perf_evsel *evsel);
+
+int perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads);
+int perf_evsel__alloc_counts(struct perf_evsel *evsel, int ncpus);
+void perf_evsel__free_fd(struct perf_evsel *evsel);
+void perf_evsel__close_fd(struct perf_evsel *evsel, int ncpus, int nthreads);
+
+int perf_evsel__open_per_cpu(struct perf_evsel *evsel, struct cpu_map *cpus);
+int perf_evsel__open_per_thread(struct perf_evsel *evsel, struct thread_map *threads);
+int perf_evsel__open(struct perf_evsel *evsel, 
+		     struct cpu_map *cpus, struct thread_map *threads);
+
+#define perf_evsel__match(evsel, t, c)		\
+	(evsel->attr.type == PERF_TYPE_##t &&	\
+	 evsel->attr.config == PERF_COUNT_##c)
+
+int __perf_evsel__read_on_cpu(struct perf_evsel *evsel,
+			      int cpu, int thread, bool scale);
+
+/**
+ * perf_evsel__read_on_cpu - Read out the results on a CPU and thread
+ *
+ * @evsel - event selector to read value
+ * @cpu - CPU of interest
+ * @thread - thread of interest
+ */
+static inline int perf_evsel__read_on_cpu(struct perf_evsel *evsel,
+					  int cpu, int thread)
+{
+	return __perf_evsel__read_on_cpu(evsel, cpu, thread, false);
+}
+
+/**
+ * perf_evsel__read_on_cpu_scaled - Read out the results on a CPU and thread, scaled
+ *
+ * @evsel - event selector to read value
+ * @cpu - CPU of interest
+ * @thread - thread of interest
+ */
+static inline int perf_evsel__read_on_cpu_scaled(struct perf_evsel *evsel,
+						 int cpu, int thread)
+{
+	return __perf_evsel__read_on_cpu(evsel, cpu, thread, true);
+}
+
+int __perf_evsel__read(struct perf_evsel *evsel, int ncpus, int nthreads,
+		       bool scale);
+
+/**
+ * perf_evsel__read - Read the aggregate results on all CPUs
+ *
+ * @evsel - event selector to read value
+ * @ncpus - Number of cpus affected, from zero
+ * @nthreads - Number of threads affected, from zero
+ */
+static inline int perf_evsel__read(struct perf_evsel *evsel,
+				    int ncpus, int nthreads)
+{
+	return __perf_evsel__read(evsel, ncpus, nthreads, false);
+}
+
+/**
+ * perf_evsel__read_scaled - Read the aggregate results on all CPUs, scaled
+ *
+ * @evsel - event selector to read value
+ * @ncpus - Number of cpus affected, from zero
+ * @nthreads - Number of threads affected, from zero
+ */
+static inline int perf_evsel__read_scaled(struct perf_evsel *evsel,
+					  int ncpus, int nthreads)
+{
+	return __perf_evsel__read(evsel, ncpus, nthreads, true);
+}
+
+#endif /* __PERF_EVSEL_H */
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index d7e67b167ea..989fa2dee2f 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -152,6 +152,11 @@ void perf_header__set_feat(struct perf_header *self, int feat)
 	set_bit(feat, self->adds_features);
 }
 
+void perf_header__clear_feat(struct perf_header *self, int feat)
+{
+	clear_bit(feat, self->adds_features);
+}
+
 bool perf_header__has_feat(const struct perf_header *self, int feat)
 {
 	return test_bit(feat, self->adds_features);
@@ -265,15 +270,16 @@ int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
 			  const char *name, bool is_kallsyms)
 {
 	const size_t size = PATH_MAX;
-	char *filename = malloc(size),
+	char *realname = realpath(name, NULL),
+	     *filename = malloc(size),
 	     *linkname = malloc(size), *targetname;
 	int len, err = -1;
 
-	if (filename == NULL || linkname == NULL)
+	if (realname == NULL || filename == NULL || linkname == NULL)
 		goto out_free;
 
 	len = snprintf(filename, size, "%s%s%s",
-		       debugdir, is_kallsyms ? "/" : "", name);
+		       debugdir, is_kallsyms ? "/" : "", realname);
 	if (mkdir_p(filename, 0755))
 		goto out_free;
 
@@ -283,7 +289,7 @@ int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
 		if (is_kallsyms) {
 			 if (copyfile("/proc/kallsyms", filename))
 				goto out_free;
-		} else if (link(name, filename) && copyfile(name, filename))
+		} else if (link(realname, filename) && copyfile(name, filename))
 			goto out_free;
 	}
 
@@ -300,6 +306,7 @@ int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
 	if (symlink(targetname, linkname) == 0)
 		err = 0;
 out_free:
+	free(realname);
 	free(filename);
 	free(linkname);
 	return err;
@@ -431,8 +438,10 @@ static int perf_header__adds_write(struct perf_header *self, int fd)
 	int idx = 0, err;
 
 	session = container_of(self, struct perf_session, header);
-	if (perf_session__read_build_ids(session, true))
-		perf_header__set_feat(self, HEADER_BUILD_ID);
+
+	if (perf_header__has_feat(self, HEADER_BUILD_ID &&
+	    !perf_session__read_build_ids(session, true)))
+		perf_header__clear_feat(self, HEADER_BUILD_ID);
 
 	nr_sections = bitmap_weight(self->adds_features, HEADER_FEAT_BITS);
 	if (!nr_sections)
@@ -454,7 +463,7 @@ static int perf_header__adds_write(struct perf_header *self, int fd)
 
 		/* Write trace info */
 		trace_sec->offset = lseek(fd, 0, SEEK_CUR);
-		read_tracing_data(fd, attrs, nr_counters);
+		read_tracing_data(fd, &evsel_list);
 		trace_sec->size = lseek(fd, 0, SEEK_CUR) - trace_sec->offset;
 	}
 
@@ -597,7 +606,7 @@ int perf_header__write(struct perf_header *self, int fd, bool at_exit)
 static int perf_header__getbuffer64(struct perf_header *self,
 				    int fd, void *buf, size_t size)
 {
-	if (do_read(fd, buf, size) <= 0)
+	if (readn(fd, buf, size) <= 0)
 		return -1;
 
 	if (self->needs_swap)
@@ -653,7 +662,7 @@ int perf_file_header__read(struct perf_file_header *self,
 {
 	lseek(fd, 0, SEEK_SET);
 
-	if (do_read(fd, self, sizeof(*self)) <= 0 ||
+	if (readn(fd, self, sizeof(*self)) <= 0 ||
 	    memcmp(&self->magic, __perf_magic, sizeof(self->magic)))
 		return -1;
 
@@ -814,7 +823,7 @@ static int perf_file_header__read_pipe(struct perf_pipe_file_header *self,
 				       struct perf_header *ph, int fd,
 				       bool repipe)
 {
-	if (do_read(fd, self, sizeof(*self)) <= 0 ||
+	if (readn(fd, self, sizeof(*self)) <= 0 ||
 	    memcmp(&self->magic, __perf_magic, sizeof(self->magic)))
 		return -1;
 
@@ -939,6 +948,24 @@ u64 perf_header__sample_type(struct perf_header *header)
 	return type;
 }
 
+bool perf_header__sample_id_all(const struct perf_header *header)
+{
+	bool value = false, first = true;
+	int i;
+
+	for (i = 0; i < header->attrs; i++) {
+		struct perf_header_attr *attr = header->attr[i];
+
+		if (first) {
+			value = attr->attr.sample_id_all;
+			first = false;
+		} else if (value != attr->attr.sample_id_all)
+			die("non matching sample_id_all");
+	}
+
+	return value;
+}
+
 struct perf_event_attr *
 perf_header__find_attr(u64 id, struct perf_header *header)
 {
@@ -946,11 +973,16 @@ perf_header__find_attr(u64 id, struct perf_header *header)
 
 	/*
 	 * We set id to -1 if the data file doesn't contain sample
-	 * ids. Check for this and avoid walking through the entire
-	 * list of ids which may be large.
+	 * ids. This can happen when the data file contains one type
+	 * of event and in that case, the header can still store the
+	 * event attribute information. Check for this and avoid
+	 * walking through the entire list of ids which may be large.
 	 */
-	if (id == -1ULL)
+	if (id == -1ULL) {
+		if (header->attrs > 0)
+			return &header->attr[0]->attr;
 		return NULL;
+	}
 
 	for (i = 0; i < header->attrs; i++) {
 		struct perf_header_attr *attr = header->attr[i];
@@ -980,21 +1012,23 @@ int event__synthesize_attr(struct perf_event_attr *attr, u16 ids, u64 *id,
 
 	ev = malloc(size);
 
+	if (ev == NULL)
+		return -ENOMEM;
+
 	ev->attr.attr = *attr;
 	memcpy(ev->attr.id, id, ids * sizeof(u64));
 
 	ev->attr.header.type = PERF_RECORD_HEADER_ATTR;
 	ev->attr.header.size = size;
 
-	err = process(ev, session);
+	err = process(ev, NULL, session);
 
 	free(ev);
 
 	return err;
 }
 
-int event__synthesize_attrs(struct perf_header *self,
-			    event__handler_t process,
+int event__synthesize_attrs(struct perf_header *self, event__handler_t process,
 			    struct perf_session *session)
 {
 	struct perf_header_attr	*attr;
@@ -1064,7 +1098,7 @@ int event__synthesize_event_type(u64 event_id, char *name,
 	ev.event_type.header.size = sizeof(ev.event_type) -
 		(sizeof(ev.event_type.event_type.name) - size);
 
-	err = process(&ev, session);
+	err = process(&ev, NULL, session);
 
 	return err;
 }
@@ -1099,8 +1133,7 @@ int event__process_event_type(event_t *self,
 	return 0;
 }
 
-int event__synthesize_tracing_data(int fd, struct perf_event_attr *pattrs,
-				   int nb_events,
+int event__synthesize_tracing_data(int fd, struct list_head *pattrs,
 				   event__handler_t process,
 				   struct perf_session *session __unused)
 {
@@ -1111,7 +1144,7 @@ int event__synthesize_tracing_data(int fd, struct perf_event_attr *pattrs,
 	memset(&ev, 0, sizeof(ev));
 
 	ev.tracing_data.header.type = PERF_RECORD_HEADER_TRACING_DATA;
-	size = read_tracing_data_size(fd, pattrs, nb_events);
+	size = read_tracing_data_size(fd, pattrs);
 	if (size <= 0)
 		return size;
 	aligned_size = ALIGN(size, sizeof(u64));
@@ -1119,9 +1152,9 @@ int event__synthesize_tracing_data(int fd, struct perf_event_attr *pattrs,
 	ev.tracing_data.header.size = sizeof(ev.tracing_data);
 	ev.tracing_data.size = aligned_size;
 
-	process(&ev, session);
+	process(&ev, NULL, session);
 
-	err = read_tracing_data(fd, pattrs, nb_events);
+	err = read_tracing_data(fd, pattrs);
 	write_padded(fd, NULL, 0, padding);
 
 	return aligned_size;
@@ -1179,7 +1212,7 @@ int event__synthesize_build_id(struct dso *pos, u16 misc,
 	ev.build_id.header.size = sizeof(ev.build_id) + len;
 	memcpy(&ev.build_id.filename, pos->long_name, pos->long_name_len);
 
-	err = process(&ev, session);
+	err = process(&ev, NULL, session);
 
 	return err;
 }
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
index 402ac2454cf..33f16be7b72 100644
--- a/tools/perf/util/header.h
+++ b/tools/perf/util/header.h
@@ -81,9 +81,11 @@ void perf_header_attr__delete(struct perf_header_attr *self);
 int perf_header_attr__add_id(struct perf_header_attr *self, u64 id);
 
 u64 perf_header__sample_type(struct perf_header *header);
+bool perf_header__sample_id_all(const struct perf_header *header);
 struct perf_event_attr *
 perf_header__find_attr(u64 id, struct perf_header *header);
 void perf_header__set_feat(struct perf_header *self, int feat);
+void perf_header__clear_feat(struct perf_header *self, int feat);
 bool perf_header__has_feat(const struct perf_header *self, int feat);
 
 int perf_header__process_sections(struct perf_header *self, int fd,
@@ -111,8 +113,7 @@ int event__synthesize_event_types(event__handler_t process,
 int event__process_event_type(event_t *self,
 			      struct perf_session *session);
 
-int event__synthesize_tracing_data(int fd, struct perf_event_attr *pattrs,
-				   int nb_events,
+int event__synthesize_tracing_data(int fd, struct list_head *pattrs,
 				   event__handler_t process,
 				   struct perf_session *session);
 int event__process_tracing_data(event_t *self,
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 2022e874099..c749ba6136a 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -356,7 +356,7 @@ static size_t ipchain__fprintf_graph_line(FILE *fp, int depth, int depth_mask,
 
 static size_t ipchain__fprintf_graph(FILE *fp, struct callchain_list *chain,
 				     int depth, int depth_mask, int period,
-				     u64 total_samples, int hits,
+				     u64 total_samples, u64 hits,
 				     int left_margin)
 {
 	int i;
@@ -1092,6 +1092,12 @@ int hist_entry__annotate(struct hist_entry *self, struct list_head *head,
 	FILE *file;
 	int err = 0;
 	u64 len;
+	char symfs_filename[PATH_MAX];
+
+	if (filename) {
+		snprintf(symfs_filename, sizeof(symfs_filename), "%s%s",
+			 symbol_conf.symfs, filename);
+	}
 
 	if (filename == NULL) {
 		if (dso->has_build_id) {
@@ -1100,9 +1106,9 @@ int hist_entry__annotate(struct hist_entry *self, struct list_head *head,
 			return -ENOMEM;
 		}
 		goto fallback;
-	} else if (readlink(filename, command, sizeof(command)) < 0 ||
+	} else if (readlink(symfs_filename, command, sizeof(command)) < 0 ||
 		   strstr(command, "[kernel.kallsyms]") ||
-		   access(filename, R_OK)) {
+		   access(symfs_filename, R_OK)) {
 		free(filename);
 fallback:
 		/*
@@ -1111,6 +1117,8 @@ fallback:
 		 * DSO is the same as when 'perf record' ran.
 		 */
 		filename = dso->long_name;
+		snprintf(symfs_filename, sizeof(symfs_filename), "%s%s",
+			 symbol_conf.symfs, filename);
 		free_filename = false;
 	}
 
@@ -1137,7 +1145,7 @@ fallback:
 		 "objdump --start-address=0x%016Lx --stop-address=0x%016Lx -dS -C %s|grep -v %s|expand",
 		 map__rip_2objdump(map, sym->start),
 		 map__rip_2objdump(map, sym->end),
-		 filename, filename);
+		 symfs_filename, filename);
 
 	pr_debug("Executing: %s\n", command);
 
@@ -1168,10 +1176,13 @@ size_t hists__fprintf_nr_events(struct hists *self, FILE *fp)
 	size_t ret = 0;
 
 	for (i = 0; i < PERF_RECORD_HEADER_MAX; ++i) {
-		if (!event__name[i])
+		const char *name = event__get_event_name(i);
+
+		if (!strcmp(name, "UNKNOWN"))
 			continue;
-		ret += fprintf(fp, "%10s events: %10d\n",
-			       event__name[i], self->stats.nr_events[i]);
+
+		ret += fprintf(fp, "%16s events: %10d\n", name,
+			       self->stats.nr_events[i]);
 	}
 
 	return ret;
diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h
index 587d375d343..ee789856a8c 100644
--- a/tools/perf/util/hist.h
+++ b/tools/perf/util/hist.h
@@ -52,8 +52,10 @@ struct sym_priv {
 struct events_stats {
 	u64 total_period;
 	u64 total_lost;
+	u64 total_invalid_chains;
 	u32 nr_events[PERF_RECORD_HEADER_MAX];
 	u32 nr_unknown_events;
+	u32 nr_invalid_chains;
 };
 
 enum hist_column {
diff --git a/tools/perf/util/include/asm/cpufeature.h b/tools/perf/util/include/asm/cpufeature.h
new file mode 100644
index 00000000000..acffd5e4d1d
--- /dev/null
+++ b/tools/perf/util/include/asm/cpufeature.h
@@ -0,0 +1,9 @@
+
+#ifndef PERF_CPUFEATURE_H
+#define PERF_CPUFEATURE_H
+
+/* cpufeature.h ... dummy header file for including arch/x86/lib/memcpy_64.S */
+
+#define X86_FEATURE_REP_GOOD 0
+
+#endif	/* PERF_CPUFEATURE_H */
diff --git a/tools/perf/util/include/asm/dwarf2.h b/tools/perf/util/include/asm/dwarf2.h
new file mode 100644
index 00000000000..bb4198e7837
--- /dev/null
+++ b/tools/perf/util/include/asm/dwarf2.h
@@ -0,0 +1,11 @@
+
+#ifndef PERF_DWARF2_H
+#define PERF_DWARF2_H
+
+/* dwarf2.h ... dummy header file for including arch/x86/lib/memcpy_64.S */
+
+#define CFI_STARTPROC
+#define CFI_ENDPROC
+
+#endif	/* PERF_DWARF2_H */
+
diff --git a/tools/perf/util/include/linux/bitops.h b/tools/perf/util/include/linux/bitops.h
index bb4ac2e0538..8be0b968ca0 100644
--- a/tools/perf/util/include/linux/bitops.h
+++ b/tools/perf/util/include/linux/bitops.h
@@ -13,6 +13,11 @@ static inline void set_bit(int nr, unsigned long *addr)
 	addr[nr / BITS_PER_LONG] |= 1UL << (nr % BITS_PER_LONG);
 }
 
+static inline void clear_bit(int nr, unsigned long *addr)
+{
+	addr[nr / BITS_PER_LONG] &= ~(1UL << (nr % BITS_PER_LONG));
+}
+
 static __always_inline int test_bit(unsigned int nr, const unsigned long *addr)
 {
 	return ((1UL << (nr % BITS_PER_LONG)) &
diff --git a/tools/perf/util/include/linux/linkage.h b/tools/perf/util/include/linux/linkage.h
new file mode 100644
index 00000000000..06387cffe12
--- /dev/null
+++ b/tools/perf/util/include/linux/linkage.h
@@ -0,0 +1,13 @@
+
+#ifndef PERF_LINUX_LINKAGE_H_
+#define PERF_LINUX_LINKAGE_H_
+
+/* linkage.h ... for including arch/x86/lib/memcpy_64.S */
+
+#define ENTRY(name)				\
+	.globl name;				\
+	name:
+
+#define ENDPROC(name)
+
+#endif	/* PERF_LINUX_LINKAGE_H_ */
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 4af5bd59cfd..649083f27e0 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -1,6 +1,7 @@
 #include "../../../include/linux/hw_breakpoint.h"
 #include "util.h"
 #include "../perf.h"
+#include "evsel.h"
 #include "parse-options.h"
 #include "parse-events.h"
 #include "exec_cmd.h"
@@ -12,8 +13,7 @@
 
 int				nr_counters;
 
-struct perf_event_attr		attrs[MAX_COUNTERS];
-char				*filters[MAX_COUNTERS];
+LIST_HEAD(evsel_list);
 
 struct event_symbol {
 	u8		type;
@@ -266,10 +266,10 @@ static char *event_cache_name(u8 cache_type, u8 cache_op, u8 cache_result)
 	return name;
 }
 
-const char *event_name(int counter)
+const char *event_name(struct perf_evsel *evsel)
 {
-	u64 config = attrs[counter].config;
-	int type = attrs[counter].type;
+	u64 config = evsel->attr.config;
+	int type = evsel->attr.type;
 
 	return __event_name(type, config);
 }
@@ -434,7 +434,7 @@ parse_single_tracepoint_event(char *sys_name,
 	id = atoll(id_buf);
 	attr->config = id;
 	attr->type = PERF_TYPE_TRACEPOINT;
-	*strp = evt_name + evt_length;
+	*strp += strlen(sys_name) + evt_length + 1; /* + 1 for the ':' */
 
 	attr->sample_type |= PERF_SAMPLE_RAW;
 	attr->sample_type |= PERF_SAMPLE_TIME;
@@ -495,7 +495,7 @@ static enum event_result parse_tracepoint_event(const char **strp,
 				    struct perf_event_attr *attr)
 {
 	const char *evt_name;
-	char *flags;
+	char *flags = NULL, *comma_loc;
 	char sys_name[MAX_EVENT_LENGTH];
 	unsigned int sys_length, evt_length;
 
@@ -514,6 +514,11 @@ static enum event_result parse_tracepoint_event(const char **strp,
 	sys_name[sys_length] = '\0';
 	evt_name = evt_name + 1;
 
+	comma_loc = strchr(evt_name, ',');
+	if (comma_loc) {
+		/* take the event name up to the comma */
+		evt_name = strndup(evt_name, comma_loc - evt_name);
+	}
 	flags = strchr(evt_name, ':');
 	if (flags) {
 		/* split it out: */
@@ -524,9 +529,8 @@ static enum event_result parse_tracepoint_event(const char **strp,
 	evt_length = strlen(evt_name);
 	if (evt_length >= MAX_EVENT_LENGTH)
 		return EVT_FAILED;
-
 	if (strpbrk(evt_name, "*?")) {
-		*strp = evt_name + evt_length;
+		*strp += strlen(sys_name) + evt_length;
 		return parse_multiple_tracepoint_event(sys_name, evt_name,
 						       flags);
 	} else
@@ -810,9 +814,6 @@ int parse_events(const struct option *opt __used, const char *str, int unset __u
 			return -1;
 
 	for (;;) {
-		if (nr_counters == MAX_COUNTERS)
-			return -1;
-
 		memset(&attr, 0, sizeof(attr));
 		ret = parse_event_symbols(&str, &attr);
 		if (ret == EVT_FAILED)
@@ -822,8 +823,13 @@ int parse_events(const struct option *opt __used, const char *str, int unset __u
 			return -1;
 
 		if (ret != EVT_HANDLED_ALL) {
-			attrs[nr_counters] = attr;
-			nr_counters++;
+			struct perf_evsel *evsel;
+			evsel = perf_evsel__new(attr.type, attr.config,
+						nr_counters);
+			if (evsel == NULL)
+				return -1;
+			list_add_tail(&evsel->node, &evsel_list);
+			++nr_counters;
 		}
 
 		if (*str == 0)
@@ -840,21 +846,22 @@ int parse_events(const struct option *opt __used, const char *str, int unset __u
 int parse_filter(const struct option *opt __used, const char *str,
 		 int unset __used)
 {
-	int i = nr_counters - 1;
-	int len = strlen(str);
+	struct perf_evsel *last = NULL;
 
-	if (i < 0 || attrs[i].type != PERF_TYPE_TRACEPOINT) {
+	if (!list_empty(&evsel_list))
+		last = list_entry(evsel_list.prev, struct perf_evsel, node);
+
+	if (last == NULL || last->attr.type != PERF_TYPE_TRACEPOINT) {
 		fprintf(stderr,
 			"-F option should follow a -e tracepoint option\n");
 		return -1;
 	}
 
-	filters[i] = malloc(len + 1);
-	if (!filters[i]) {
+	last->filter = strdup(str);
+	if (last->filter == NULL) {
 		fprintf(stderr, "not enough memory to hold filter string\n");
 		return -1;
 	}
-	strcpy(filters[i], str);
 
 	return 0;
 }
@@ -906,6 +913,47 @@ static void print_tracepoint_events(void)
 }
 
 /*
+ * Check whether event is in <debugfs_mount_point>/tracing/events
+ */
+
+int is_valid_tracepoint(const char *event_string)
+{
+	DIR *sys_dir, *evt_dir;
+	struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
+	char evt_path[MAXPATHLEN];
+	char dir_path[MAXPATHLEN];
+
+	if (debugfs_valid_mountpoint(debugfs_path))
+		return 0;
+
+	sys_dir = opendir(debugfs_path);
+	if (!sys_dir)
+		return 0;
+
+	for_each_subsystem(sys_dir, sys_dirent, sys_next) {
+
+		snprintf(dir_path, MAXPATHLEN, "%s/%s", debugfs_path,
+			 sys_dirent.d_name);
+		evt_dir = opendir(dir_path);
+		if (!evt_dir)
+			continue;
+
+		for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) {
+			snprintf(evt_path, MAXPATHLEN, "%s:%s",
+				 sys_dirent.d_name, evt_dirent.d_name);
+			if (!strcmp(evt_path, event_string)) {
+				closedir(evt_dir);
+				closedir(sys_dir);
+				return 1;
+			}
+		}
+		closedir(evt_dir);
+	}
+	closedir(sys_dir);
+	return 0;
+}
+
+/*
  * Print the help text for the event symbols:
  */
 void print_events(void)
@@ -963,3 +1011,26 @@ void print_events(void)
 
 	exit(129);
 }
+
+int perf_evsel_list__create_default(void)
+{
+	struct perf_evsel *evsel = perf_evsel__new(PERF_TYPE_HARDWARE,
+						   PERF_COUNT_HW_CPU_CYCLES, 0);
+	if (evsel == NULL)
+		return -ENOMEM;
+
+	list_add(&evsel->node, &evsel_list);
+	++nr_counters;
+	return 0;
+}
+
+void perf_evsel_list__delete(void)
+{
+	struct perf_evsel *pos, *n;
+
+	list_for_each_entry_safe(pos, n, &evsel_list, node) {
+		list_del_init(&pos->node);
+		perf_evsel__delete(pos);
+	}
+	nr_counters = 0;
+}
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index fc4ab3fe877..b82cafb8377 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -4,6 +4,16 @@
  * Parse symbolic events/counts passed in as options:
  */
 
+#include "../../../include/linux/perf_event.h"
+
+struct list_head;
+struct perf_evsel;
+
+extern struct list_head evsel_list;
+
+int perf_evsel_list__create_default(void);
+void perf_evsel_list__delete(void);
+
 struct option;
 
 struct tracepoint_path {
@@ -13,14 +23,11 @@ struct tracepoint_path {
 };
 
 extern struct tracepoint_path *tracepoint_id_to_path(u64 config);
-extern bool have_tracepoints(struct perf_event_attr *pattrs, int nb_events);
+extern bool have_tracepoints(struct list_head *evsel_list);
 
 extern int			nr_counters;
 
-extern struct perf_event_attr attrs[MAX_COUNTERS];
-extern char *filters[MAX_COUNTERS];
-
-extern const char *event_name(int ctr);
+const char *event_name(struct perf_evsel *event);
 extern const char *__event_name(int type, u64 config);
 
 extern int parse_events(const struct option *opt, const char *str, int unset);
@@ -29,9 +36,9 @@ extern int parse_filter(const struct option *opt, const char *str, int unset);
 #define EVENTS_HELP_MAX (128*1024)
 
 extern void print_events(void);
+extern int is_valid_tracepoint(const char *event_string);
 
 extern char debugfs_path[];
 extern int valid_debugfs_mount(const char *debugfs);
 
-
 #endif /* __PERF_PARSE_EVENTS_H */
diff --git a/tools/perf/util/parse-options.h b/tools/perf/util/parse-options.h
index c7d72dce54b..abc31a1dac1 100644
--- a/tools/perf/util/parse-options.h
+++ b/tools/perf/util/parse-options.h
@@ -119,6 +119,10 @@ struct option {
 	{ .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f), .flags = PARSE_OPT_NOARG }
 #define OPT_CALLBACK_DEFAULT(s, l, v, a, h, f, d) \
 	{ .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l), .value = (v), (a), .help = (h), .callback = (f), .defval = (intptr_t)d, .flags = PARSE_OPT_LASTARG_DEFAULT }
+#define OPT_CALLBACK_DEFAULT_NOOPT(s, l, v, a, h, f, d) \
+	{ .type = OPTION_CALLBACK, .short_name = (s), .long_name = (l),\
+	.value = (v), (a), .help = (h), .callback = (f), .defval = (intptr_t)d,\
+	.flags = PARSE_OPT_LASTARG_DEFAULT | PARSE_OPT_NOARG}
 
 /* parse_options() will filter out the processed options and leave the
  * non-option argments in argv[].
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index 3b6a5297bf1..128aaab0aed 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -95,7 +95,7 @@ static int init_vmlinux(void)
 		goto out;
 
 	if (machine__create_kernel_maps(&machine) < 0) {
-		pr_debug("machine__create_kernel_maps ");
+		pr_debug("machine__create_kernel_maps() failed.\n");
 		goto out;
 	}
 out:
@@ -114,6 +114,8 @@ static struct symbol *__find_kernel_function_by_name(const char *name,
 const char *kernel_get_module_path(const char *module)
 {
 	struct dso *dso;
+	struct map *map;
+	const char *vmlinux_name;
 
 	if (module) {
 		list_for_each_entry(dso, &machine.kernel_dsos, node) {
@@ -123,10 +125,17 @@ const char *kernel_get_module_path(const char *module)
 		}
 		pr_debug("Failed to find module %s.\n", module);
 		return NULL;
+	}
+
+	map = machine.vmlinux_maps[MAP__FUNCTION];
+	dso = map->dso;
+
+	vmlinux_name = symbol_conf.vmlinux_name;
+	if (vmlinux_name) {
+		if (dso__load_vmlinux(dso, map, vmlinux_name, NULL) <= 0)
+			return NULL;
 	} else {
-		dso = machine.vmlinux_maps[MAP__FUNCTION]->dso;
-		if (dso__load_vmlinux_path(dso,
-			 machine.vmlinux_maps[MAP__FUNCTION], NULL) < 0) {
+		if (dso__load_vmlinux_path(dso, map, NULL) <= 0) {
 			pr_debug("Failed to load kernel map.\n");
 			return NULL;
 		}
@@ -140,7 +149,8 @@ static int open_vmlinux(const char *module)
 {
 	const char *path = kernel_get_module_path(module);
 	if (!path) {
-		pr_err("Failed to find path of %s module", module ?: "kernel");
+		pr_err("Failed to find path of %s module.\n",
+		       module ?: "kernel");
 		return -ENOENT;
 	}
 	pr_debug("Try to open %s\n", path);
@@ -217,7 +227,7 @@ static int try_to_find_probe_trace_events(struct perf_probe_event *pev,
 		pr_warning("Warning: No dwarf info found in the vmlinux - "
 			"please rebuild kernel with CONFIG_DEBUG_INFO=y.\n");
 		if (!need_dwarf) {
-			pr_debug("Trying to use symbols.\nn");
+			pr_debug("Trying to use symbols.\n");
 			return 0;
 		}
 	}
@@ -286,42 +296,49 @@ static int get_real_path(const char *raw_path, const char *comp_dir,
 #define LINEBUF_SIZE 256
 #define NR_ADDITIONAL_LINES 2
 
-static int show_one_line(FILE *fp, int l, bool skip, bool show_num)
+static int __show_one_line(FILE *fp, int l, bool skip, bool show_num)
 {
 	char buf[LINEBUF_SIZE];
-	const char *color = PERF_COLOR_BLUE;
-
-	if (fgets(buf, LINEBUF_SIZE, fp) == NULL)
-		goto error;
-	if (!skip) {
-		if (show_num)
-			fprintf(stdout, "%7d  %s", l, buf);
-		else
-			color_fprintf(stdout, color, "         %s", buf);
-	}
+	const char *color = show_num ? "" : PERF_COLOR_BLUE;
+	const char *prefix = NULL;
 
-	while (strlen(buf) == LINEBUF_SIZE - 1 &&
-	       buf[LINEBUF_SIZE - 2] != '\n') {
+	do {
 		if (fgets(buf, LINEBUF_SIZE, fp) == NULL)
 			goto error;
-		if (!skip) {
-			if (show_num)
-				fprintf(stdout, "%s", buf);
-			else
-				color_fprintf(stdout, color, "%s", buf);
+		if (skip)
+			continue;
+		if (!prefix) {
+			prefix = show_num ? "%7d  " : "         ";
+			color_fprintf(stdout, color, prefix, l);
 		}
-	}
+		color_fprintf(stdout, color, "%s", buf);
 
-	return 0;
+	} while (strchr(buf, '\n') == NULL);
+
+	return 1;
 error:
-	if (feof(fp))
-		pr_warning("Source file is shorter than expected.\n");
-	else
+	if (ferror(fp)) {
 		pr_warning("File read error: %s\n", strerror(errno));
+		return -1;
+	}
+	return 0;
+}
 
-	return -1;
+static int _show_one_line(FILE *fp, int l, bool skip, bool show_num)
+{
+	int rv = __show_one_line(fp, l, skip, show_num);
+	if (rv == 0) {
+		pr_warning("Source file is shorter than expected.\n");
+		rv = -1;
+	}
+	return rv;
 }
 
+#define show_one_line_with_num(f,l)	_show_one_line(f,l,false,true)
+#define show_one_line(f,l)		_show_one_line(f,l,false,false)
+#define skip_one_line(f,l)		_show_one_line(f,l,true,false)
+#define show_one_line_or_eof(f,l)	__show_one_line(f,l,false,false)
+
 /*
  * Show line-range always requires debuginfo to find source file and
  * line number.
@@ -370,7 +387,7 @@ int show_line_range(struct line_range *lr, const char *module)
 		fprintf(stdout, "<%s:%d>\n", lr->function,
 			lr->start - lr->offset);
 	else
-		fprintf(stdout, "<%s:%d>\n", lr->file, lr->start);
+		fprintf(stdout, "<%s:%d>\n", lr->path, lr->start);
 
 	fp = fopen(lr->path, "r");
 	if (fp == NULL) {
@@ -379,26 +396,30 @@ int show_line_range(struct line_range *lr, const char *module)
 		return -errno;
 	}
 	/* Skip to starting line number */
-	while (l < lr->start && ret >= 0)
-		ret = show_one_line(fp, l++, true, false);
-	if (ret < 0)
-		goto end;
+	while (l < lr->start) {
+		ret = skip_one_line(fp, l++);
+		if (ret < 0)
+			goto end;
+	}
 
 	list_for_each_entry(ln, &lr->line_list, list) {
-		while (ln->line > l && ret >= 0)
-			ret = show_one_line(fp, (l++) - lr->offset,
-					    false, false);
-		if (ret >= 0)
-			ret = show_one_line(fp, (l++) - lr->offset,
-					    false, true);
+		for (; ln->line > l; l++) {
+			ret = show_one_line(fp, l - lr->offset);
+			if (ret < 0)
+				goto end;
+		}
+		ret = show_one_line_with_num(fp, l++ - lr->offset);
 		if (ret < 0)
 			goto end;
 	}
 
 	if (lr->end == INT_MAX)
 		lr->end = l + NR_ADDITIONAL_LINES;
-	while (l <= lr->end && !feof(fp) && ret >= 0)
-		ret = show_one_line(fp, (l++) - lr->offset, false, false);
+	while (l <= lr->end) {
+		ret = show_one_line_or_eof(fp, l++ - lr->offset);
+		if (ret <= 0)
+			break;
+	}
 end:
 	fclose(fp);
 	return ret;
@@ -457,7 +478,7 @@ int show_available_vars(struct perf_probe_event *pevs, int npevs,
 
 	fd = open_vmlinux(module);
 	if (fd < 0) {
-		pr_warning("Failed to open debuginfo file.\n");
+		pr_warning("Failed to open debug information file.\n");
 		return fd;
 	}
 
@@ -517,56 +538,87 @@ int show_available_vars(struct perf_probe_event *pevs __unused,
 }
 #endif
 
+static int parse_line_num(char **ptr, int *val, const char *what)
+{
+	const char *start = *ptr;
+
+	errno = 0;
+	*val = strtol(*ptr, ptr, 0);
+	if (errno || *ptr == start) {
+		semantic_error("'%s' is not a valid number.\n", what);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * Stuff 'lr' according to the line range described by 'arg'.
+ * The line range syntax is described by:
+ *
+ *         SRC[:SLN[+NUM|-ELN]]
+ *         FNC[:SLN[+NUM|-ELN]]
+ */
 int parse_line_range_desc(const char *arg, struct line_range *lr)
 {
-	const char *ptr;
-	char *tmp;
-	/*
-	 * <Syntax>
-	 * SRC:SLN[+NUM|-ELN]
-	 * FUNC[:SLN[+NUM|-ELN]]
-	 */
-	ptr = strchr(arg, ':');
-	if (ptr) {
-		lr->start = (int)strtoul(ptr + 1, &tmp, 0);
-		if (*tmp == '+') {
-			lr->end = lr->start + (int)strtoul(tmp + 1, &tmp, 0);
-			lr->end--;	/*
-					 * Adjust the number of lines here.
-					 * If the number of lines == 1, the
-					 * the end of line should be equal to
-					 * the start of line.
-					 */
-		} else if (*tmp == '-')
-			lr->end = (int)strtoul(tmp + 1, &tmp, 0);
-		else
-			lr->end = INT_MAX;
+	char *range, *name = strdup(arg);
+	int err;
+
+	if (!name)
+		return -ENOMEM;
+
+	lr->start = 0;
+	lr->end = INT_MAX;
+
+	range = strchr(name, ':');
+	if (range) {
+		*range++ = '\0';
+
+		err = parse_line_num(&range, &lr->start, "start line");
+		if (err)
+			goto err;
+
+		if (*range == '+' || *range == '-') {
+			const char c = *range++;
+
+			err = parse_line_num(&range, &lr->end, "end line");
+			if (err)
+				goto err;
+
+			if (c == '+') {
+				lr->end += lr->start;
+				/*
+				 * Adjust the number of lines here.
+				 * If the number of lines == 1, the
+				 * the end of line should be equal to
+				 * the start of line.
+				 */
+				lr->end--;
+			}
+		}
+
 		pr_debug("Line range is %d to %d\n", lr->start, lr->end);
+
+		err = -EINVAL;
 		if (lr->start > lr->end) {
 			semantic_error("Start line must be smaller"
 				       " than end line.\n");
-			return -EINVAL;
+			goto err;
 		}
-		if (*tmp != '\0') {
-			semantic_error("Tailing with invalid character '%d'.\n",
-				       *tmp);
-			return -EINVAL;
+		if (*range != '\0') {
+			semantic_error("Tailing with invalid str '%s'.\n", range);
+			goto err;
 		}
-		tmp = strndup(arg, (ptr - arg));
-	} else {
-		tmp = strdup(arg);
-		lr->end = INT_MAX;
 	}
 
-	if (tmp == NULL)
-		return -ENOMEM;
-
-	if (strchr(tmp, '.'))
-		lr->file = tmp;
+	if (strchr(name, '.'))
+		lr->file = name;
 	else
-		lr->function = tmp;
+		lr->function = name;
 
 	return 0;
+err:
+	free(name);
+	return err;
 }
 
 /* Check the name is good for event/group */
@@ -690,39 +742,40 @@ static int parse_perf_probe_point(char *arg, struct perf_probe_event *pev)
 
 	/* Exclusion check */
 	if (pp->lazy_line && pp->line) {
-		semantic_error("Lazy pattern can't be used with line number.");
+		semantic_error("Lazy pattern can't be used with"
+			       " line number.\n");
 		return -EINVAL;
 	}
 
 	if (pp->lazy_line && pp->offset) {
-		semantic_error("Lazy pattern can't be used with offset.");
+		semantic_error("Lazy pattern can't be used with offset.\n");
 		return -EINVAL;
 	}
 
 	if (pp->line && pp->offset) {
-		semantic_error("Offset can't be used with line number.");
+		semantic_error("Offset can't be used with line number.\n");
 		return -EINVAL;
 	}
 
 	if (!pp->line && !pp->lazy_line && pp->file && !pp->function) {
 		semantic_error("File always requires line number or "
-			       "lazy pattern.");
+			       "lazy pattern.\n");
 		return -EINVAL;
 	}
 
 	if (pp->offset && !pp->function) {
-		semantic_error("Offset requires an entry function.");
+		semantic_error("Offset requires an entry function.\n");
 		return -EINVAL;
 	}
 
 	if (pp->retprobe && !pp->function) {
-		semantic_error("Return probe requires an entry function.");
+		semantic_error("Return probe requires an entry function.\n");
 		return -EINVAL;
 	}
 
 	if ((pp->offset || pp->line || pp->lazy_line) && pp->retprobe) {
 		semantic_error("Offset/Line/Lazy pattern can't be used with "
-			       "return probe.");
+			       "return probe.\n");
 		return -EINVAL;
 	}
 
@@ -996,7 +1049,7 @@ int synthesize_perf_probe_arg(struct perf_probe_arg *pa, char *buf, size_t len)
 
 	return tmp - buf;
 error:
-	pr_debug("Failed to synthesize perf probe argument: %s",
+	pr_debug("Failed to synthesize perf probe argument: %s\n",
 		 strerror(-ret));
 	return ret;
 }
@@ -1024,13 +1077,13 @@ static char *synthesize_perf_probe_point(struct perf_probe_point *pp)
 			goto error;
 	}
 	if (pp->file) {
-		len = strlen(pp->file) - 31;
-		if (len < 0)
-			len = 0;
-		tmp = strchr(pp->file + len, '/');
-		if (!tmp)
-			tmp = pp->file + len;
-		ret = e_snprintf(file, 32, "@%s", tmp + 1);
+		tmp = pp->file;
+		len = strlen(tmp);
+		if (len > 30) {
+			tmp = strchr(pp->file + len - 30, '/');
+			tmp = tmp ? tmp + 1 : pp->file + len - 30;
+		}
+		ret = e_snprintf(file, 32, "@%s", tmp);
 		if (ret <= 0)
 			goto error;
 	}
@@ -1046,7 +1099,7 @@ static char *synthesize_perf_probe_point(struct perf_probe_point *pp)
 
 	return buf;
 error:
-	pr_debug("Failed to synthesize perf probe point: %s",
+	pr_debug("Failed to synthesize perf probe point: %s\n",
 		 strerror(-ret));
 	if (buf)
 		free(buf);
@@ -1787,7 +1840,7 @@ static int del_trace_probe_event(int fd, const char *group,
 
 	ret = e_snprintf(buf, 128, "%s:%s", group, event);
 	if (ret < 0) {
-		pr_err("Failed to copy event.");
+		pr_err("Failed to copy event.\n");
 		return ret;
 	}
 
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 3991d73d1cf..ab83b6ac5d6 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -117,28 +117,6 @@ static void line_list__free(struct list_head *head)
 }
 
 /* Dwarf FL wrappers */
-
-static int __linux_kernel_find_elf(Dwfl_Module *mod,
-				   void **userdata,
-				   const char *module_name,
-				   Dwarf_Addr base,
-				   char **file_name, Elf **elfp)
-{
-	int fd;
-	const char *path = kernel_get_module_path(module_name);
-
-	if (path) {
-		fd = open(path, O_RDONLY);
-		if (fd >= 0) {
-			*file_name = strdup(path);
-			return fd;
-		}
-	}
-	/* If failed, try to call standard method */
-	return dwfl_linux_kernel_find_elf(mod, userdata, module_name, base,
-					  file_name, elfp);
-}
-
 static char *debuginfo_path;	/* Currently dummy */
 
 static const Dwfl_Callbacks offline_callbacks = {
@@ -151,14 +129,6 @@ static const Dwfl_Callbacks offline_callbacks = {
 	.find_elf = dwfl_build_id_find_elf,
 };
 
-static const Dwfl_Callbacks kernel_callbacks = {
-	.find_debuginfo = dwfl_standard_find_debuginfo,
-	.debuginfo_path = &debuginfo_path,
-
-	.find_elf = __linux_kernel_find_elf,
-	.section_address = dwfl_linux_kernel_module_section_address,
-};
-
 /* Get a Dwarf from offline image */
 static Dwarf *dwfl_init_offline_dwarf(int fd, Dwfl **dwflp, Dwarf_Addr *bias)
 {
@@ -185,6 +155,38 @@ error:
 	return dbg;
 }
 
+#if _ELFUTILS_PREREQ(0, 148)
+/* This method is buggy if elfutils is older than 0.148 */
+static int __linux_kernel_find_elf(Dwfl_Module *mod,
+				   void **userdata,
+				   const char *module_name,
+				   Dwarf_Addr base,
+				   char **file_name, Elf **elfp)
+{
+	int fd;
+	const char *path = kernel_get_module_path(module_name);
+
+	pr_debug2("Use file %s for %s\n", path, module_name);
+	if (path) {
+		fd = open(path, O_RDONLY);
+		if (fd >= 0) {
+			*file_name = strdup(path);
+			return fd;
+		}
+	}
+	/* If failed, try to call standard method */
+	return dwfl_linux_kernel_find_elf(mod, userdata, module_name, base,
+					  file_name, elfp);
+}
+
+static const Dwfl_Callbacks kernel_callbacks = {
+	.find_debuginfo = dwfl_standard_find_debuginfo,
+	.debuginfo_path = &debuginfo_path,
+
+	.find_elf = __linux_kernel_find_elf,
+	.section_address = dwfl_linux_kernel_module_section_address,
+};
+
 /* Get a Dwarf from live kernel image */
 static Dwarf *dwfl_init_live_kernel_dwarf(Dwarf_Addr addr, Dwfl **dwflp,
 					  Dwarf_Addr *bias)
@@ -205,11 +207,34 @@ static Dwarf *dwfl_init_live_kernel_dwarf(Dwarf_Addr addr, Dwfl **dwflp,
 	dbg = dwfl_addrdwarf(*dwflp, addr, bias);
 	/* Here, check whether we could get a real dwarf */
 	if (!dbg) {
+		pr_debug("Failed to find kernel dwarf at %lx\n",
+			 (unsigned long)addr);
 		dwfl_end(*dwflp);
 		*dwflp = NULL;
 	}
 	return dbg;
 }
+#else
+/* With older elfutils, this just support kernel module... */
+static Dwarf *dwfl_init_live_kernel_dwarf(Dwarf_Addr addr __used, Dwfl **dwflp,
+					  Dwarf_Addr *bias)
+{
+	int fd;
+	const char *path = kernel_get_module_path("kernel");
+
+	if (!path) {
+		pr_err("Failed to find vmlinux path\n");
+		return NULL;
+	}
+
+	pr_debug2("Use file %s for debuginfo\n", path);
+	fd = open(path, O_RDONLY);
+	if (fd < 0)
+		return NULL;
+
+	return dwfl_init_offline_dwarf(fd, dwflp, bias);
+}
+#endif
 
 /* Dwarf wrappers */
 
@@ -627,8 +652,8 @@ static_var:
 	regs = get_arch_regstr(regn);
 	if (!regs) {
 		/* This should be a bug in DWARF or this tool */
-		pr_warning("Mapping for DWARF register number %u "
-			   "missing on this architecture.", regn);
+		pr_warning("Mapping for the register number %u "
+			   "missing on this architecture.\n", regn);
 		return -ERANGE;
 	}
 
@@ -674,13 +699,14 @@ static int convert_variable_type(Dwarf_Die *vr_die,
 		if (ret != DW_TAG_pointer_type &&
 		    ret != DW_TAG_array_type) {
 			pr_warning("Failed to cast into string: "
-				   "%s(%s) is not a pointer nor array.",
+				   "%s(%s) is not a pointer nor array.\n",
 				   dwarf_diename(vr_die), dwarf_diename(&type));
 			return -EINVAL;
 		}
 		if (ret == DW_TAG_pointer_type) {
 			if (die_get_real_type(&type, &type) == NULL) {
-				pr_warning("Failed to get a type information.");
+				pr_warning("Failed to get a type"
+					   " information.\n");
 				return -ENOENT;
 			}
 			while (*ref_ptr)
@@ -695,7 +721,7 @@ static int convert_variable_type(Dwarf_Die *vr_die,
 		if (!die_compare_name(&type, "char") &&
 		    !die_compare_name(&type, "unsigned char")) {
 			pr_warning("Failed to cast into string: "
-				   "%s is not (unsigned) char *.",
+				   "%s is not (unsigned) char *.\n",
 				   dwarf_diename(vr_die));
 			return -EINVAL;
 		}
@@ -805,8 +831,8 @@ static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname,
 			return -EINVAL;
 		}
 		if (field->name[0] == '[') {
-			pr_err("Semantic error: %s is not a pointor nor array.",
-			       varname);
+			pr_err("Semantic error: %s is not a pointor"
+			       " nor array.\n", varname);
 			return -EINVAL;
 		}
 		if (field->ref) {
@@ -953,7 +979,7 @@ static int convert_to_trace_point(Dwarf_Die *sp_die, Dwarf_Addr paddr,
 	name = dwarf_diename(sp_die);
 	if (name) {
 		if (dwarf_entrypc(sp_die, &eaddr) != 0) {
-			pr_warning("Failed to get entry pc of %s\n",
+			pr_warning("Failed to get entry address of %s\n",
 				   dwarf_diename(sp_die));
 			return -ENOENT;
 		}
@@ -969,7 +995,7 @@ static int convert_to_trace_point(Dwarf_Die *sp_die, Dwarf_Addr paddr,
 	if (retprobe) {
 		if (eaddr != paddr) {
 			pr_warning("Return probe must be on the head of"
-				   " a real function\n");
+				   " a real function.\n");
 			return -EINVAL;
 		}
 		tp->retprobe = true;
@@ -1008,7 +1034,7 @@ static int call_probe_finder(Dwarf_Die *sp_die, struct probe_finder *pf)
 		Dwarf_Frame *frame;
 		if (dwarf_cfi_addrframe(pf->cfi, pf->addr, &frame) != 0 ||
 		    dwarf_frame_cfa(frame, &pf->fb_ops, &nops) != 0) {
-			pr_warning("Failed to get CFA on 0x%jx\n",
+			pr_warning("Failed to get call frame on 0x%jx\n",
 				   (uintmax_t)pf->addr);
 			return -ENOENT;
 		}
@@ -1035,7 +1061,7 @@ static int find_probe_point_by_line(struct probe_finder *pf)
 	int ret = 0;
 
 	if (dwarf_getsrclines(&pf->cu_die, &lines, &nlines) != 0) {
-		pr_warning("No source lines found in this CU.\n");
+		pr_warning("No source lines found.\n");
 		return -ENOENT;
 	}
 
@@ -1137,7 +1163,7 @@ static int find_probe_point_lazy(Dwarf_Die *sp_die, struct probe_finder *pf)
 	}
 
 	if (dwarf_getsrclines(&pf->cu_die, &lines, &nlines) != 0) {
-		pr_warning("No source lines found in this CU.\n");
+		pr_warning("No source lines found.\n");
 		return -ENOENT;
 	}
 
@@ -1195,7 +1221,7 @@ static int probe_point_inline_cb(Dwarf_Die *in_die, void *data)
 	else {
 		/* Get probe address */
 		if (dwarf_entrypc(in_die, &addr) != 0) {
-			pr_warning("Failed to get entry pc of %s.\n",
+			pr_warning("Failed to get entry address of %s.\n",
 				   dwarf_diename(in_die));
 			param->retval = -ENOENT;
 			return DWARF_CB_ABORT;
@@ -1236,8 +1262,8 @@ static int probe_point_search_cb(Dwarf_Die *sp_die, void *data)
 			param->retval = find_probe_point_lazy(sp_die, pf);
 		else {
 			if (dwarf_entrypc(sp_die, &pf->addr) != 0) {
-				pr_warning("Failed to get entry pc of %s.\n",
-					   dwarf_diename(sp_die));
+				pr_warning("Failed to get entry address of "
+					   "%s.\n", dwarf_diename(sp_die));
 				param->retval = -ENOENT;
 				return DWARF_CB_ABORT;
 			}
@@ -1279,7 +1305,7 @@ static int find_probes(int fd, struct probe_finder *pf)
 
 	dbg = dwfl_init_offline_dwarf(fd, &dwfl, &bias);
 	if (!dbg) {
-		pr_warning("No dwarf info found in the vmlinux - "
+		pr_warning("No debug information found in the vmlinux - "
 			"please rebuild with CONFIG_DEBUG_INFO=y.\n");
 		return -EBADF;
 	}
@@ -1524,7 +1550,7 @@ int find_perf_probe_point(unsigned long addr, struct perf_probe_point *ppt)
 	/* Open the live linux kernel */
 	dbg = dwfl_init_live_kernel_dwarf(addr, &dwfl, &bias);
 	if (!dbg) {
-		pr_warning("No dwarf info found in the vmlinux - "
+		pr_warning("No debug information found in the vmlinux - "
 			"please rebuild with CONFIG_DEBUG_INFO=y.\n");
 		ret = -EINVAL;
 		goto end;
@@ -1534,7 +1560,8 @@ int find_perf_probe_point(unsigned long addr, struct perf_probe_point *ppt)
 	addr += bias;
 	/* Find cu die */
 	if (!dwarf_addrdie(dbg, (Dwarf_Addr)addr - bias, &cudie)) {
-		pr_warning("No CU DIE is found at %lx\n", addr);
+		pr_warning("Failed to find debug information for address %lx\n",
+			   addr);
 		ret = -EINVAL;
 		goto end;
 	}
@@ -1659,7 +1686,7 @@ static int find_line_range_by_line(Dwarf_Die *sp_die, struct line_finder *lf)
 
 	line_list__init(&lf->lr->line_list);
 	if (dwarf_getsrclines(&lf->cu_die, &lines, &nlines) != 0) {
-		pr_warning("No source lines found in this CU.\n");
+		pr_warning("No source lines found.\n");
 		return -ENOENT;
 	}
 
@@ -1784,7 +1811,7 @@ int find_line_range(int fd, struct line_range *lr)
 
 	dbg = dwfl_init_offline_dwarf(fd, &dwfl, &bias);
 	if (!dbg) {
-		pr_warning("No dwarf info found in the vmlinux - "
+		pr_warning("No debug information found in the vmlinux - "
 			"please rebuild with CONFIG_DEBUG_INFO=y.\n");
 		return -EBADF;
 	}
diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h
index bba69d45569..beaefc3c122 100644
--- a/tools/perf/util/probe-finder.h
+++ b/tools/perf/util/probe-finder.h
@@ -34,9 +34,9 @@ extern int find_available_vars_at(int fd, struct perf_probe_event *pev,
 				  bool externs);
 
 #include <dwarf.h>
-#include <libdw.h>
-#include <libdwfl.h>
-#include <version.h>
+#include <elfutils/libdw.h>
+#include <elfutils/libdwfl.h>
+#include <elfutils/version.h>
 
 struct probe_finder {
 	struct perf_probe_event	*pev;		/* Target probe event */
diff --git a/tools/perf/util/scripting-engines/trace-event-perl.c b/tools/perf/util/scripting-engines/trace-event-perl.c
index b059dc50cc2..93680818e24 100644
--- a/tools/perf/util/scripting-engines/trace-event-perl.c
+++ b/tools/perf/util/scripting-engines/trace-event-perl.c
@@ -1,5 +1,5 @@
 /*
- * trace-event-perl.  Feed perf trace events to an embedded Perl interpreter.
+ * trace-event-perl.  Feed perf script events to an embedded Perl interpreter.
  *
  * Copyright (C) 2009 Tom Zanussi <tzanussi@gmail.com>
  *
@@ -411,8 +411,8 @@ static int perl_generate_script(const char *outfile)
 		return -1;
 	}
 
-	fprintf(ofp, "# perf trace event handlers, "
-		"generated by perf trace -g perl\n");
+	fprintf(ofp, "# perf script event handlers, "
+		"generated by perf script -g perl\n");
 
 	fprintf(ofp, "# Licensed under the terms of the GNU GPL"
 		" License version 2\n\n");
diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c
index 33a63252374..c6d99334bdf 100644
--- a/tools/perf/util/scripting-engines/trace-event-python.c
+++ b/tools/perf/util/scripting-engines/trace-event-python.c
@@ -442,8 +442,8 @@ static int python_generate_script(const char *outfile)
 		fprintf(stderr, "couldn't open %s\n", fname);
 		return -1;
 	}
-	fprintf(ofp, "# perf trace event handlers, "
-		"generated by perf trace -g python\n");
+	fprintf(ofp, "# perf script event handlers, "
+		"generated by perf script -g python\n");
 
 	fprintf(ofp, "# Licensed under the terms of the GNU GPL"
 		" License version 2\n\n");
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index fa9d652c2dc..6fb4694d05f 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -65,9 +65,49 @@ out_close:
 	return -1;
 }
 
+static void perf_session__id_header_size(struct perf_session *session)
+{
+       struct sample_data *data;
+       u64 sample_type = session->sample_type;
+       u16 size = 0;
+
+	if (!session->sample_id_all)
+		goto out;
+
+       if (sample_type & PERF_SAMPLE_TID)
+               size += sizeof(data->tid) * 2;
+
+       if (sample_type & PERF_SAMPLE_TIME)
+               size += sizeof(data->time);
+
+       if (sample_type & PERF_SAMPLE_ID)
+               size += sizeof(data->id);
+
+       if (sample_type & PERF_SAMPLE_STREAM_ID)
+               size += sizeof(data->stream_id);
+
+       if (sample_type & PERF_SAMPLE_CPU)
+               size += sizeof(data->cpu) * 2;
+out:
+       session->id_hdr_size = size;
+}
+
+void perf_session__set_sample_id_all(struct perf_session *session, bool value)
+{
+	session->sample_id_all = value;
+	perf_session__id_header_size(session);
+}
+
+void perf_session__set_sample_type(struct perf_session *session, u64 type)
+{
+	session->sample_type = type;
+}
+
 void perf_session__update_sample_type(struct perf_session *self)
 {
 	self->sample_type = perf_header__sample_type(&self->header);
+	self->sample_id_all = perf_header__sample_id_all(&self->header);
+	perf_session__id_header_size(self);
 }
 
 int perf_session__create_kernel_maps(struct perf_session *self)
@@ -85,7 +125,9 @@ static void perf_session__destroy_kernel_maps(struct perf_session *self)
 	machines__destroy_guest_kernel_maps(&self->machines);
 }
 
-struct perf_session *perf_session__new(const char *filename, int mode, bool force, bool repipe)
+struct perf_session *perf_session__new(const char *filename, int mode,
+				       bool force, bool repipe,
+				       struct perf_event_ops *ops)
 {
 	size_t len = filename ? strlen(filename) + 1 : 0;
 	struct perf_session *self = zalloc(sizeof(*self) + len);
@@ -101,10 +143,20 @@ struct perf_session *perf_session__new(const char *filename, int mode, bool forc
 	INIT_LIST_HEAD(&self->dead_threads);
 	self->hists_tree = RB_ROOT;
 	self->last_match = NULL;
-	self->mmap_window = 32;
+	/*
+	 * On 64bit we can mmap the data file in one go. No need for tiny mmap
+	 * slices. On 32bit we use 32MB.
+	 */
+#if BITS_PER_LONG == 64
+	self->mmap_window = ULLONG_MAX;
+#else
+	self->mmap_window = 32 * 1024 * 1024ULL;
+#endif
 	self->machines = RB_ROOT;
 	self->repipe = repipe;
-	INIT_LIST_HEAD(&self->ordered_samples.samples_head);
+	INIT_LIST_HEAD(&self->ordered_samples.samples);
+	INIT_LIST_HEAD(&self->ordered_samples.sample_cache);
+	INIT_LIST_HEAD(&self->ordered_samples.to_free);
 	machine__init(&self->host_machine, "", HOST_KERNEL_ID);
 
 	if (mode == O_RDONLY) {
@@ -120,6 +172,13 @@ struct perf_session *perf_session__new(const char *filename, int mode, bool forc
 	}
 
 	perf_session__update_sample_type(self);
+
+	if (ops && ops->ordering_requires_timestamps &&
+	    ops->ordered_samples && !self->sample_id_all) {
+		dump_printf("WARNING: No sample_id_all support, falling back to unordered processing\n");
+		ops->ordered_samples = false;
+	}
+
 out:
 	return self;
 out_free:
@@ -230,7 +289,15 @@ struct map_symbol *perf_session__resolve_callchain(struct perf_session *self,
 	return syms;
 }
 
+static int process_event_synth_stub(event_t *event __used,
+				    struct perf_session *session __used)
+{
+	dump_printf(": unhandled!\n");
+	return 0;
+}
+
 static int process_event_stub(event_t *event __used,
+			      struct sample_data *sample __used,
 			      struct perf_session *session __used)
 {
 	dump_printf(": unhandled!\n");
@@ -262,7 +329,7 @@ static void perf_event_ops__fill_defaults(struct perf_event_ops *handler)
 	if (handler->exit == NULL)
 		handler->exit = process_event_stub;
 	if (handler->lost == NULL)
-		handler->lost = process_event_stub;
+		handler->lost = event__process_lost;
 	if (handler->read == NULL)
 		handler->read = process_event_stub;
 	if (handler->throttle == NULL)
@@ -270,13 +337,13 @@ static void perf_event_ops__fill_defaults(struct perf_event_ops *handler)
 	if (handler->unthrottle == NULL)
 		handler->unthrottle = process_event_stub;
 	if (handler->attr == NULL)
-		handler->attr = process_event_stub;
+		handler->attr = process_event_synth_stub;
 	if (handler->event_type == NULL)
-		handler->event_type = process_event_stub;
+		handler->event_type = process_event_synth_stub;
 	if (handler->tracing_data == NULL)
-		handler->tracing_data = process_event_stub;
+		handler->tracing_data = process_event_synth_stub;
 	if (handler->build_id == NULL)
-		handler->build_id = process_event_stub;
+		handler->build_id = process_event_synth_stub;
 	if (handler->finished_round == NULL) {
 		if (handler->ordered_samples)
 			handler->finished_round = process_finished_round;
@@ -386,33 +453,61 @@ static event__swap_op event__swap_ops[] = {
 
 struct sample_queue {
 	u64			timestamp;
-	struct sample_event	*event;
+	u64			file_offset;
+	event_t			*event;
 	struct list_head	list;
 };
 
+static void perf_session_free_sample_buffers(struct perf_session *session)
+{
+	struct ordered_samples *os = &session->ordered_samples;
+
+	while (!list_empty(&os->to_free)) {
+		struct sample_queue *sq;
+
+		sq = list_entry(os->to_free.next, struct sample_queue, list);
+		list_del(&sq->list);
+		free(sq);
+	}
+}
+
+static int perf_session_deliver_event(struct perf_session *session,
+				      event_t *event,
+				      struct sample_data *sample,
+				      struct perf_event_ops *ops,
+				      u64 file_offset);
+
 static void flush_sample_queue(struct perf_session *s,
 			       struct perf_event_ops *ops)
 {
-	struct list_head *head = &s->ordered_samples.samples_head;
-	u64 limit = s->ordered_samples.next_flush;
+	struct ordered_samples *os = &s->ordered_samples;
+	struct list_head *head = &os->samples;
 	struct sample_queue *tmp, *iter;
+	struct sample_data sample;
+	u64 limit = os->next_flush;
+	u64 last_ts = os->last_sample ? os->last_sample->timestamp : 0ULL;
 
 	if (!ops->ordered_samples || !limit)
 		return;
 
 	list_for_each_entry_safe(iter, tmp, head, list) {
 		if (iter->timestamp > limit)
-			return;
+			break;
 
-		if (iter == s->ordered_samples.last_inserted)
-			s->ordered_samples.last_inserted = NULL;
+		event__parse_sample(iter->event, s, &sample);
+		perf_session_deliver_event(s, iter->event, &sample, ops,
+					   iter->file_offset);
 
-		ops->sample((event_t *)iter->event, s);
-
-		s->ordered_samples.last_flush = iter->timestamp;
+		os->last_flush = iter->timestamp;
 		list_del(&iter->list);
-		free(iter->event);
-		free(iter);
+		list_add(&iter->list, &os->sample_cache);
+	}
+
+	if (list_empty(head)) {
+		os->last_sample = NULL;
+	} else if (last_ts <= limit) {
+		os->last_sample =
+			list_entry(head->prev, struct sample_queue, list);
 	}
 }
 
@@ -465,178 +560,265 @@ static int process_finished_round(event_t *event __used,
 	return 0;
 }
 
-static void __queue_sample_end(struct sample_queue *new, struct list_head *head)
-{
-	struct sample_queue *iter;
-
-	list_for_each_entry_reverse(iter, head, list) {
-		if (iter->timestamp < new->timestamp) {
-			list_add(&new->list, &iter->list);
-			return;
-		}
-	}
-
-	list_add(&new->list, head);
-}
-
-static void __queue_sample_before(struct sample_queue *new,
-				  struct sample_queue *iter,
-				  struct list_head *head)
-{
-	list_for_each_entry_continue_reverse(iter, head, list) {
-		if (iter->timestamp < new->timestamp) {
-			list_add(&new->list, &iter->list);
-			return;
-		}
-	}
-
-	list_add(&new->list, head);
-}
-
-static void __queue_sample_after(struct sample_queue *new,
-				 struct sample_queue *iter,
-				 struct list_head *head)
-{
-	list_for_each_entry_continue(iter, head, list) {
-		if (iter->timestamp > new->timestamp) {
-			list_add_tail(&new->list, &iter->list);
-			return;
-		}
-	}
-	list_add_tail(&new->list, head);
-}
-
 /* The queue is ordered by time */
-static void __queue_sample_event(struct sample_queue *new,
-				 struct perf_session *s)
+static void __queue_event(struct sample_queue *new, struct perf_session *s)
 {
-	struct sample_queue *last_inserted = s->ordered_samples.last_inserted;
-	struct list_head *head = &s->ordered_samples.samples_head;
+	struct ordered_samples *os = &s->ordered_samples;
+	struct sample_queue *sample = os->last_sample;
+	u64 timestamp = new->timestamp;
+	struct list_head *p;
 
+	os->last_sample = new;
 
-	if (!last_inserted) {
-		__queue_sample_end(new, head);
+	if (!sample) {
+		list_add(&new->list, &os->samples);
+		os->max_timestamp = timestamp;
 		return;
 	}
 
 	/*
-	 * Most of the time the current event has a timestamp
-	 * very close to the last event inserted, unless we just switched
-	 * to another event buffer. Having a sorting based on a list and
-	 * on the last inserted event that is close to the current one is
-	 * probably more efficient than an rbtree based sorting.
+	 * last_sample might point to some random place in the list as it's
+	 * the last queued event. We expect that the new event is close to
+	 * this.
 	 */
-	if (last_inserted->timestamp >= new->timestamp)
-		__queue_sample_before(new, last_inserted, head);
-	else
-		__queue_sample_after(new, last_inserted, head);
+	if (sample->timestamp <= timestamp) {
+		while (sample->timestamp <= timestamp) {
+			p = sample->list.next;
+			if (p == &os->samples) {
+				list_add_tail(&new->list, &os->samples);
+				os->max_timestamp = timestamp;
+				return;
+			}
+			sample = list_entry(p, struct sample_queue, list);
+		}
+		list_add_tail(&new->list, &sample->list);
+	} else {
+		while (sample->timestamp > timestamp) {
+			p = sample->list.prev;
+			if (p == &os->samples) {
+				list_add(&new->list, &os->samples);
+				return;
+			}
+			sample = list_entry(p, struct sample_queue, list);
+		}
+		list_add(&new->list, &sample->list);
+	}
 }
 
-static int queue_sample_event(event_t *event, struct sample_data *data,
-			      struct perf_session *s)
+#define MAX_SAMPLE_BUFFER	(64 * 1024 / sizeof(struct sample_queue))
+
+static int perf_session_queue_event(struct perf_session *s, event_t *event,
+				    struct sample_data *data, u64 file_offset)
 {
+	struct ordered_samples *os = &s->ordered_samples;
+	struct list_head *sc = &os->sample_cache;
 	u64 timestamp = data->time;
 	struct sample_queue *new;
 
+	if (!timestamp || timestamp == ~0ULL)
+		return -ETIME;
 
 	if (timestamp < s->ordered_samples.last_flush) {
 		printf("Warning: Timestamp below last timeslice flush\n");
 		return -EINVAL;
 	}
 
-	new = malloc(sizeof(*new));
-	if (!new)
-		return -ENOMEM;
+	if (!list_empty(sc)) {
+		new = list_entry(sc->next, struct sample_queue, list);
+		list_del(&new->list);
+	} else if (os->sample_buffer) {
+		new = os->sample_buffer + os->sample_buffer_idx;
+		if (++os->sample_buffer_idx == MAX_SAMPLE_BUFFER)
+			os->sample_buffer = NULL;
+	} else {
+		os->sample_buffer = malloc(MAX_SAMPLE_BUFFER * sizeof(*new));
+		if (!os->sample_buffer)
+			return -ENOMEM;
+		list_add(&os->sample_buffer->list, &os->to_free);
+		os->sample_buffer_idx = 2;
+		new = os->sample_buffer + 1;
+	}
 
 	new->timestamp = timestamp;
+	new->file_offset = file_offset;
+	new->event = event;
 
-	new->event = malloc(event->header.size);
-	if (!new->event) {
-		free(new);
-		return -ENOMEM;
-	}
+	__queue_event(new, s);
 
-	memcpy(new->event, event, event->header.size);
+	return 0;
+}
 
-	__queue_sample_event(new, s);
-	s->ordered_samples.last_inserted = new;
+static void callchain__printf(struct sample_data *sample)
+{
+	unsigned int i;
 
-	if (new->timestamp > s->ordered_samples.max_timestamp)
-		s->ordered_samples.max_timestamp = new->timestamp;
+	printf("... chain: nr:%Lu\n", sample->callchain->nr);
 
-	return 0;
+	for (i = 0; i < sample->callchain->nr; i++)
+		printf("..... %2d: %016Lx\n", i, sample->callchain->ips[i]);
 }
 
-static int perf_session__process_sample(event_t *event, struct perf_session *s,
-					struct perf_event_ops *ops)
+static void perf_session__print_tstamp(struct perf_session *session,
+				       event_t *event,
+				       struct sample_data *sample)
 {
-	struct sample_data data;
+	if (event->header.type != PERF_RECORD_SAMPLE &&
+	    !session->sample_id_all) {
+		fputs("-1 -1 ", stdout);
+		return;
+	}
 
-	if (!ops->ordered_samples)
-		return ops->sample(event, s);
+	if ((session->sample_type & PERF_SAMPLE_CPU))
+		printf("%u ", sample->cpu);
 
-	bzero(&data, sizeof(struct sample_data));
-	event__parse_sample(event, s->sample_type, &data);
+	if (session->sample_type & PERF_SAMPLE_TIME)
+		printf("%Lu ", sample->time);
+}
 
-	queue_sample_event(event, &data, s);
+static void dump_event(struct perf_session *session, event_t *event,
+		       u64 file_offset, struct sample_data *sample)
+{
+	if (!dump_trace)
+		return;
 
-	return 0;
+	printf("\n%#Lx [%#x]: event: %d\n", file_offset, event->header.size,
+	       event->header.type);
+
+	trace_event(event);
+
+	if (sample)
+		perf_session__print_tstamp(session, event, sample);
+
+	printf("%#Lx [%#x]: PERF_RECORD_%s", file_offset, event->header.size,
+	       event__get_event_name(event->header.type));
 }
 
-static int perf_session__process_event(struct perf_session *self,
-				       event_t *event,
-				       struct perf_event_ops *ops,
-				       u64 offset, u64 head)
+static void dump_sample(struct perf_session *session, event_t *event,
+			struct sample_data *sample)
 {
-	trace_event(event);
+	if (!dump_trace)
+		return;
 
-	if (event->header.type < PERF_RECORD_HEADER_MAX) {
-		dump_printf("%#Lx [%#x]: PERF_RECORD_%s",
-			    offset + head, event->header.size,
-			    event__name[event->header.type]);
-		hists__inc_nr_events(&self->hists, event->header.type);
-	}
+	printf("(IP, %d): %d/%d: %#Lx period: %Ld\n", event->header.misc,
+	       sample->pid, sample->tid, sample->ip, sample->period);
 
-	if (self->header.needs_swap && event__swap_ops[event->header.type])
-		event__swap_ops[event->header.type](event);
+	if (session->sample_type & PERF_SAMPLE_CALLCHAIN)
+		callchain__printf(sample);
+}
+
+static int perf_session_deliver_event(struct perf_session *session,
+				      event_t *event,
+				      struct sample_data *sample,
+				      struct perf_event_ops *ops,
+				      u64 file_offset)
+{
+	dump_event(session, event, file_offset, sample);
 
 	switch (event->header.type) {
 	case PERF_RECORD_SAMPLE:
-		return perf_session__process_sample(event, self, ops);
+		dump_sample(session, event, sample);
+		return ops->sample(event, sample, session);
 	case PERF_RECORD_MMAP:
-		return ops->mmap(event, self);
+		return ops->mmap(event, sample, session);
 	case PERF_RECORD_COMM:
-		return ops->comm(event, self);
+		return ops->comm(event, sample, session);
 	case PERF_RECORD_FORK:
-		return ops->fork(event, self);
+		return ops->fork(event, sample, session);
 	case PERF_RECORD_EXIT:
-		return ops->exit(event, self);
+		return ops->exit(event, sample, session);
 	case PERF_RECORD_LOST:
-		return ops->lost(event, self);
+		return ops->lost(event, sample, session);
 	case PERF_RECORD_READ:
-		return ops->read(event, self);
+		return ops->read(event, sample, session);
 	case PERF_RECORD_THROTTLE:
-		return ops->throttle(event, self);
+		return ops->throttle(event, sample, session);
 	case PERF_RECORD_UNTHROTTLE:
-		return ops->unthrottle(event, self);
+		return ops->unthrottle(event, sample, session);
+	default:
+		++session->hists.stats.nr_unknown_events;
+		return -1;
+	}
+}
+
+static int perf_session__preprocess_sample(struct perf_session *session,
+					   event_t *event, struct sample_data *sample)
+{
+	if (event->header.type != PERF_RECORD_SAMPLE ||
+	    !(session->sample_type & PERF_SAMPLE_CALLCHAIN))
+		return 0;
+
+	if (!ip_callchain__valid(sample->callchain, event)) {
+		pr_debug("call-chain problem with event, skipping it.\n");
+		++session->hists.stats.nr_invalid_chains;
+		session->hists.stats.total_invalid_chains += sample->period;
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int perf_session__process_user_event(struct perf_session *session, event_t *event,
+					    struct perf_event_ops *ops, u64 file_offset)
+{
+	dump_event(session, event, file_offset, NULL);
+
+	/* These events are processed right away */
+	switch (event->header.type) {
 	case PERF_RECORD_HEADER_ATTR:
-		return ops->attr(event, self);
+		return ops->attr(event, session);
 	case PERF_RECORD_HEADER_EVENT_TYPE:
-		return ops->event_type(event, self);
+		return ops->event_type(event, session);
 	case PERF_RECORD_HEADER_TRACING_DATA:
 		/* setup for reading amidst mmap */
-		lseek(self->fd, offset + head, SEEK_SET);
-		return ops->tracing_data(event, self);
+		lseek(session->fd, file_offset, SEEK_SET);
+		return ops->tracing_data(event, session);
 	case PERF_RECORD_HEADER_BUILD_ID:
-		return ops->build_id(event, self);
+		return ops->build_id(event, session);
 	case PERF_RECORD_FINISHED_ROUND:
-		return ops->finished_round(event, self, ops);
+		return ops->finished_round(event, session, ops);
 	default:
-		++self->hists.stats.nr_unknown_events;
-		return -1;
+		return -EINVAL;
 	}
 }
 
+static int perf_session__process_event(struct perf_session *session,
+				       event_t *event,
+				       struct perf_event_ops *ops,
+				       u64 file_offset)
+{
+	struct sample_data sample;
+	int ret;
+
+	if (session->header.needs_swap && event__swap_ops[event->header.type])
+		event__swap_ops[event->header.type](event);
+
+	if (event->header.type >= PERF_RECORD_HEADER_MAX)
+		return -EINVAL;
+
+	hists__inc_nr_events(&session->hists, event->header.type);
+
+	if (event->header.type >= PERF_RECORD_USER_TYPE_START)
+		return perf_session__process_user_event(session, event, ops, file_offset);
+
+	/*
+	 * For all kernel events we get the sample data
+	 */
+	event__parse_sample(event, session, &sample);
+
+	/* Preprocess sample records - precheck callchains */
+	if (perf_session__preprocess_sample(session, event, &sample))
+		return 0;
+
+	if (ops->ordered_samples) {
+		ret = perf_session_queue_event(session, event, &sample,
+					       file_offset);
+		if (ret != -ETIME)
+			return ret;
+	}
+
+	return perf_session_deliver_event(session, event, &sample, ops,
+					  file_offset);
+}
+
 void perf_event_header__bswap(struct perf_event_header *self)
 {
 	self->type = bswap_32(self->type);
@@ -656,21 +838,33 @@ static struct thread *perf_session__register_idle_thread(struct perf_session *se
 	return thread;
 }
 
-int do_read(int fd, void *buf, size_t size)
+static void perf_session__warn_about_errors(const struct perf_session *session,
+					    const struct perf_event_ops *ops)
 {
-	void *buf_start = buf;
-
-	while (size) {
-		int ret = read(fd, buf, size);
-
-		if (ret <= 0)
-			return ret;
+	if (ops->lost == event__process_lost &&
+	    session->hists.stats.total_lost != 0) {
+		ui__warning("Processed %Lu events and LOST %Lu!\n\n"
+			    "Check IO/CPU overload!\n\n",
+			    session->hists.stats.total_period,
+			    session->hists.stats.total_lost);
+	}
 
-		size -= ret;
-		buf += ret;
+	if (session->hists.stats.nr_unknown_events != 0) {
+		ui__warning("Found %u unknown events!\n\n"
+			    "Is this an older tool processing a perf.data "
+			    "file generated by a more recent tool?\n\n"
+			    "If that is not the case, consider "
+			    "reporting to linux-kernel@vger.kernel.org.\n\n",
+			    session->hists.stats.nr_unknown_events);
 	}
 
-	return buf - buf_start;
+ 	if (session->hists.stats.nr_invalid_chains != 0) {
+ 		ui__warning("Found invalid callchains!\n\n"
+ 			    "%u out of %u events were discarded for this reason.\n\n"
+ 			    "Consider reporting to linux-kernel@vger.kernel.org.\n\n",
+ 			    session->hists.stats.nr_invalid_chains,
+ 			    session->hists.stats.nr_events[PERF_RECORD_SAMPLE]);
+ 	}
 }
 
 #define session_done()	(*(volatile int *)(&session_done))
@@ -690,7 +884,7 @@ static int __perf_session__process_pipe_events(struct perf_session *self,
 
 	head = 0;
 more:
-	err = do_read(self->fd, &event, sizeof(struct perf_event_header));
+	err = readn(self->fd, &event, sizeof(struct perf_event_header));
 	if (err <= 0) {
 		if (err == 0)
 			goto done;
@@ -710,8 +904,7 @@ more:
 	p += sizeof(struct perf_event_header);
 
 	if (size - sizeof(struct perf_event_header)) {
-		err = do_read(self->fd, p,
-			      size - sizeof(struct perf_event_header));
+		err = readn(self->fd, p, size - sizeof(struct perf_event_header));
 		if (err <= 0) {
 			if (err == 0) {
 				pr_err("unexpected end of event stream\n");
@@ -724,8 +917,7 @@ more:
 	}
 
 	if (size == 0 ||
-	    (skip = perf_session__process_event(self, &event, ops,
-						0, head)) < 0) {
+	    (skip = perf_session__process_event(self, &event, ops, head)) < 0) {
 		dump_printf("%#Lx [%#x]: skipping unknown header type: %d\n",
 			    head, event.header.size, event.header.type);
 		/*
@@ -740,9 +932,6 @@ more:
 
 	head += size;
 
-	dump_printf("\n%#Lx [%#x]: event: %d\n",
-		    head, event.header.size, event.header.type);
-
 	if (skip > 0)
 		head += skip;
 
@@ -751,82 +940,91 @@ more:
 done:
 	err = 0;
 out_err:
+	perf_session__warn_about_errors(self, ops);
+	perf_session_free_sample_buffers(self);
 	return err;
 }
 
-int __perf_session__process_events(struct perf_session *self,
+int __perf_session__process_events(struct perf_session *session,
 				   u64 data_offset, u64 data_size,
 				   u64 file_size, struct perf_event_ops *ops)
 {
-	int err, mmap_prot, mmap_flags;
-	u64 head, shift;
-	u64 offset = 0;
-	size_t	page_size;
+	u64 head, page_offset, file_offset, file_pos, progress_next;
+	int err, mmap_prot, mmap_flags, map_idx = 0;
+	struct ui_progress *progress;
+	size_t	page_size, mmap_size;
+	char *buf, *mmaps[8];
 	event_t *event;
 	uint32_t size;
-	char *buf;
-	struct ui_progress *progress = ui_progress__new("Processing events...",
-							self->size);
-	if (progress == NULL)
-		return -1;
 
 	perf_event_ops__fill_defaults(ops);
 
 	page_size = sysconf(_SC_PAGESIZE);
 
-	head = data_offset;
-	shift = page_size * (head / page_size);
-	offset += shift;
-	head -= shift;
+	page_offset = page_size * (data_offset / page_size);
+	file_offset = page_offset;
+	head = data_offset - page_offset;
+
+	if (data_offset + data_size < file_size)
+		file_size = data_offset + data_size;
+
+	progress_next = file_size / 16;
+	progress = ui_progress__new("Processing events...", file_size);
+	if (progress == NULL)
+		return -1;
+
+	mmap_size = session->mmap_window;
+	if (mmap_size > file_size)
+		mmap_size = file_size;
+
+	memset(mmaps, 0, sizeof(mmaps));
 
 	mmap_prot  = PROT_READ;
 	mmap_flags = MAP_SHARED;
 
-	if (self->header.needs_swap) {
+	if (session->header.needs_swap) {
 		mmap_prot  |= PROT_WRITE;
 		mmap_flags = MAP_PRIVATE;
 	}
 remap:
-	buf = mmap(NULL, page_size * self->mmap_window, mmap_prot,
-		   mmap_flags, self->fd, offset);
+	buf = mmap(NULL, mmap_size, mmap_prot, mmap_flags, session->fd,
+		   file_offset);
 	if (buf == MAP_FAILED) {
 		pr_err("failed to mmap file\n");
 		err = -errno;
 		goto out_err;
 	}
+	mmaps[map_idx] = buf;
+	map_idx = (map_idx + 1) & (ARRAY_SIZE(mmaps) - 1);
+	file_pos = file_offset + head;
 
 more:
 	event = (event_t *)(buf + head);
-	ui_progress__update(progress, offset);
 
-	if (self->header.needs_swap)
+	if (session->header.needs_swap)
 		perf_event_header__bswap(&event->header);
 	size = event->header.size;
 	if (size == 0)
 		size = 8;
 
-	if (head + event->header.size >= page_size * self->mmap_window) {
-		int munmap_ret;
-
-		shift = page_size * (head / page_size);
-
-		munmap_ret = munmap(buf, page_size * self->mmap_window);
-		assert(munmap_ret == 0);
+	if (head + event->header.size >= mmap_size) {
+		if (mmaps[map_idx]) {
+			munmap(mmaps[map_idx], mmap_size);
+			mmaps[map_idx] = NULL;
+		}
 
-		offset += shift;
-		head -= shift;
+		page_offset = page_size * (head / page_size);
+		file_offset += page_offset;
+		head -= page_offset;
 		goto remap;
 	}
 
 	size = event->header.size;
 
-	dump_printf("\n%#Lx [%#x]: event: %d\n",
-		    offset + head, event->header.size, event->header.type);
-
 	if (size == 0 ||
-	    perf_session__process_event(self, event, ops, offset, head) < 0) {
+	    perf_session__process_event(session, event, ops, file_pos) < 0) {
 		dump_printf("%#Lx [%#x]: skipping unknown header type: %d\n",
-			    offset + head, event->header.size,
+			    file_offset + head, event->header.size,
 			    event->header.type);
 		/*
 		 * assume we lost track of the stream, check alignment, and
@@ -839,19 +1037,24 @@ more:
 	}
 
 	head += size;
+	file_pos += size;
 
-	if (offset + head >= data_offset + data_size)
-		goto done;
+	if (file_pos >= progress_next) {
+		progress_next += file_size / 16;
+		ui_progress__update(progress, file_pos);
+	}
 
-	if (offset + head < file_size)
+	if (file_pos < file_size)
 		goto more;
-done:
+
 	err = 0;
 	/* do the final flush for ordered samples */
-	self->ordered_samples.next_flush = ULLONG_MAX;
-	flush_sample_queue(self, ops);
+	session->ordered_samples.next_flush = ULLONG_MAX;
+	flush_sample_queue(session, ops);
 out_err:
 	ui_progress__delete(progress);
+	perf_session__warn_about_errors(session, ops);
+	perf_session_free_sample_buffers(session);
 	return err;
 }
 
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 9fa0fc2a863..decd83f274f 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -17,8 +17,12 @@ struct ordered_samples {
 	u64			last_flush;
 	u64			next_flush;
 	u64			max_timestamp;
-	struct list_head	samples_head;
-	struct sample_queue	*last_inserted;
+	struct list_head	samples;
+	struct list_head	sample_cache;
+	struct list_head	to_free;
+	struct sample_queue	*sample_buffer;
+	struct sample_queue	*last_sample;
+	int			sample_buffer_idx;
 };
 
 struct perf_session {
@@ -42,6 +46,8 @@ struct perf_session {
 	int			fd;
 	bool			fd_pipe;
 	bool			repipe;
+	bool			sample_id_all;
+	u16			id_hdr_size;
 	int			cwdlen;
 	char			*cwd;
 	struct ordered_samples	ordered_samples;
@@ -50,7 +56,9 @@ struct perf_session {
 
 struct perf_event_ops;
 
-typedef int (*event_op)(event_t *self, struct perf_session *session);
+typedef int (*event_op)(event_t *self, struct sample_data *sample,
+			struct perf_session *session);
+typedef int (*event_synth_op)(event_t *self, struct perf_session *session);
 typedef int (*event_op2)(event_t *self, struct perf_session *session,
 			 struct perf_event_ops *ops);
 
@@ -63,16 +71,19 @@ struct perf_event_ops {
 			lost,
 			read,
 			throttle,
-			unthrottle,
-			attr,
+			unthrottle;
+	event_synth_op	attr,
 			event_type,
 			tracing_data,
 			build_id;
 	event_op2	finished_round;
 	bool		ordered_samples;
+	bool		ordering_requires_timestamps;
 };
 
-struct perf_session *perf_session__new(const char *filename, int mode, bool force, bool repipe);
+struct perf_session *perf_session__new(const char *filename, int mode,
+				       bool force, bool repipe,
+				       struct perf_event_ops *ops);
 void perf_session__delete(struct perf_session *self);
 
 void perf_event_header__bswap(struct perf_event_header *self);
@@ -98,8 +109,9 @@ void mem_bswap_64(void *src, int byte_size);
 
 int perf_session__create_kernel_maps(struct perf_session *self);
 
-int do_read(int fd, void *buf, size_t size);
 void perf_session__update_sample_type(struct perf_session *self);
+void perf_session__set_sample_id_all(struct perf_session *session, bool value);
+void perf_session__set_sample_type(struct perf_session *session, u64 type);
 void perf_session__remove_thread(struct perf_session *self, struct thread *th);
 
 static inline
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index b62a553cc67..f44fa541d56 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -170,7 +170,7 @@ static int hist_entry__dso_snprintf(struct hist_entry *self, char *bf,
 		return repsep_snprintf(bf, size, "%-*s", width, dso_name);
 	}
 
-	return repsep_snprintf(bf, size, "%*Lx", width, self->ip);
+	return repsep_snprintf(bf, size, "%-*s", width, "[unknown]");
 }
 
 /* --sort symbol */
@@ -196,7 +196,7 @@ static int hist_entry__sym_snprintf(struct hist_entry *self, char *bf,
 
 	if (verbose) {
 		char o = self->ms.map ? dso__symtab_origin(self->ms.map->dso) : '!';
-		ret += repsep_snprintf(bf, size, "%*Lx %c ",
+		ret += repsep_snprintf(bf, size, "%-#*llx %c ",
 				       BITS_PER_LONG / 4, self->ip, o);
 	}
 
@@ -205,7 +205,7 @@ static int hist_entry__sym_snprintf(struct hist_entry *self, char *bf,
 		ret += repsep_snprintf(bf + ret, size - ret, "%s",
 				       self->ms.sym->name);
 	else
-		ret += repsep_snprintf(bf + ret, size - ret, "%*Lx",
+		ret += repsep_snprintf(bf + ret, size - ret, "%-#*llx",
 				       BITS_PER_LONG / 4, self->ip);
 
 	return ret;
diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c
index 0409fc7c005..8fc0bd3a3a4 100644
--- a/tools/perf/util/string.c
+++ b/tools/perf/util/string.c
@@ -259,7 +259,7 @@ static bool __match_glob(const char *str, const char *pat, bool ignore_space)
 		if (!*pat)	/* Tail wild card matches all */
 			return true;
 		while (*str)
-			if (strglobmatch(str++, pat))
+			if (__match_glob(str++, pat, ignore_space))
 				return true;
 	}
 	return !*str && !*pat;
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index b39f499e575..15ccfba8cdf 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -22,6 +22,10 @@
 #include <limits.h>
 #include <sys/utsname.h>
 
+#ifndef KSYM_NAME_LEN
+#define KSYM_NAME_LEN 128
+#endif
+
 #ifndef NT_GNU_BUILD_ID
 #define NT_GNU_BUILD_ID 3
 #endif
@@ -41,6 +45,7 @@ struct symbol_conf symbol_conf = {
 	.exclude_other	  = true,
 	.use_modules	  = true,
 	.try_vmlinux_path = true,
+	.symfs            = "",
 };
 
 int dso__name_len(const struct dso *self)
@@ -92,7 +97,7 @@ static void symbols__fixup_end(struct rb_root *self)
 		prev = curr;
 		curr = rb_entry(nd, struct symbol, rb_node);
 
-		if (prev->end == prev->start)
+		if (prev->end == prev->start && prev->end != curr->start)
 			prev->end = curr->start - 1;
 	}
 
@@ -121,7 +126,7 @@ static void __map_groups__fixup_end(struct map_groups *self, enum map_type type)
 	 * We still haven't the actual symbols, so guess the
 	 * last map final address.
 	 */
-	curr->end = ~0UL;
+	curr->end = ~0ULL;
 }
 
 static void map_groups__fixup_end(struct map_groups *self)
@@ -295,7 +300,9 @@ static void symbols__insert_by_name(struct rb_root *self, struct symbol *sym)
 {
 	struct rb_node **p = &self->rb_node;
 	struct rb_node *parent = NULL;
-	struct symbol_name_rb_node *symn = ((void *)sym) - sizeof(*parent), *s;
+	struct symbol_name_rb_node *symn, *s;
+
+	symn = container_of(sym, struct symbol_name_rb_node, sym);
 
 	while (*p != NULL) {
 		parent = *p;
@@ -423,16 +430,25 @@ size_t dso__fprintf(struct dso *self, enum map_type type, FILE *fp)
 
 int kallsyms__parse(const char *filename, void *arg,
 		    int (*process_symbol)(void *arg, const char *name,
-						     char type, u64 start))
+					  char type, u64 start, u64 end))
 {
 	char *line = NULL;
 	size_t n;
-	int err = 0;
+	int err = -1;
+	u64 prev_start = 0;
+	char prev_symbol_type = 0;
+	char *prev_symbol_name;
 	FILE *file = fopen(filename, "r");
 
 	if (file == NULL)
 		goto out_failure;
 
+	prev_symbol_name = malloc(KSYM_NAME_LEN);
+	if (prev_symbol_name == NULL)
+		goto out_close;
+
+	err = 0;
+
 	while (!feof(file)) {
 		u64 start;
 		int line_len, len;
@@ -452,14 +468,33 @@ int kallsyms__parse(const char *filename, void *arg,
 			continue;
 
 		symbol_type = toupper(line[len]);
-		symbol_name = line + len + 2;
+		len += 2;
+		symbol_name = line + len;
+		len = line_len - len;
 
-		err = process_symbol(arg, symbol_name, symbol_type, start);
-		if (err)
+		if (len >= KSYM_NAME_LEN) {
+			err = -1;
 			break;
+		}
+
+		if (prev_symbol_type) {
+			u64 end = start;
+			if (end != prev_start)
+				--end;
+			err = process_symbol(arg, prev_symbol_name,
+					     prev_symbol_type, prev_start, end);
+			if (err)
+				break;
+		}
+
+		memcpy(prev_symbol_name, symbol_name, len + 1);
+		prev_symbol_type = symbol_type;
+		prev_start = start;
 	}
 
+	free(prev_symbol_name);
 	free(line);
+out_close:
 	fclose(file);
 	return err;
 
@@ -481,7 +516,7 @@ static u8 kallsyms2elf_type(char type)
 }
 
 static int map__process_kallsym_symbol(void *arg, const char *name,
-				       char type, u64 start)
+				       char type, u64 start, u64 end)
 {
 	struct symbol *sym;
 	struct process_kallsyms_args *a = arg;
@@ -490,11 +525,8 @@ static int map__process_kallsym_symbol(void *arg, const char *name,
 	if (!symbol_type__is_a(type, a->map->type))
 		return 0;
 
-	/*
-	 * Will fix up the end later, when we have all symbols sorted.
-	 */
-	sym = symbol__new(start, 0, kallsyms2elf_type(type), name);
-
+	sym = symbol__new(start, end - start + 1,
+			  kallsyms2elf_type(type), name);
 	if (sym == NULL)
 		return -ENOMEM;
 	/*
@@ -530,7 +562,7 @@ static int dso__split_kallsyms(struct dso *self, struct map *map,
 	struct machine *machine = kmaps->machine;
 	struct map *curr_map = map;
 	struct symbol *pos;
-	int count = 0;
+	int count = 0, moved = 0;	
 	struct rb_root *root = &self->symbols[map->type];
 	struct rb_node *next = rb_first(root);
 	int kernel_range = 0;
@@ -588,6 +620,11 @@ static int dso__split_kallsyms(struct dso *self, struct map *map,
 			char dso_name[PATH_MAX];
 			struct dso *dso;
 
+			if (count == 0) {
+				curr_map = map;
+				goto filter_symbol;
+			}
+
 			if (self->kernel == DSO_TYPE_GUEST_KERNEL)
 				snprintf(dso_name, sizeof(dso_name),
 					"[guest.kernel].%d",
@@ -613,7 +650,7 @@ static int dso__split_kallsyms(struct dso *self, struct map *map,
 			map_groups__insert(kmaps, curr_map);
 			++kernel_range;
 		}
-
+filter_symbol:
 		if (filter && filter(curr_map, pos)) {
 discard_symbol:		rb_erase(&pos->rb_node, root);
 			symbol__delete(pos);
@@ -621,8 +658,9 @@ discard_symbol:		rb_erase(&pos->rb_node, root);
 			if (curr_map != map) {
 				rb_erase(&pos->rb_node, root);
 				symbols__insert(&curr_map->dso->symbols[curr_map->type], pos);
-			}
-			count++;
+				++moved;
+			} else
+				++count;
 		}
 	}
 
@@ -632,7 +670,7 @@ discard_symbol:		rb_erase(&pos->rb_node, root);
 		dso__set_loaded(curr_map->dso, curr_map->type);
 	}
 
-	return count;
+	return count + moved;
 }
 
 int dso__load_kallsyms(struct dso *self, const char *filename,
@@ -641,7 +679,6 @@ int dso__load_kallsyms(struct dso *self, const char *filename,
 	if (dso__load_all_kallsyms(self, filename, map) < 0)
 		return -1;
 
-	symbols__fixup_end(&self->symbols[map->type]);
 	if (self->kernel == DSO_TYPE_GUEST_KERNEL)
 		self->origin = DSO__ORIG_GUEST_KERNEL;
 	else
@@ -831,8 +868,11 @@ static int dso__synthesize_plt_symbols(struct  dso *self, struct map *map,
 	char sympltname[1024];
 	Elf *elf;
 	int nr = 0, symidx, fd, err = 0;
+	char name[PATH_MAX];
 
-	fd = open(self->long_name, O_RDONLY);
+	snprintf(name, sizeof(name), "%s%s",
+		 symbol_conf.symfs, self->long_name);
+	fd = open(name, O_RDONLY);
 	if (fd < 0)
 		goto out;
 
@@ -1444,16 +1484,19 @@ int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
 	     self->origin++) {
 		switch (self->origin) {
 		case DSO__ORIG_BUILD_ID_CACHE:
-			if (dso__build_id_filename(self, name, size) == NULL)
+			/* skip the locally configured cache if a symfs is given */
+			if (symbol_conf.symfs[0] ||
+			    (dso__build_id_filename(self, name, size) == NULL)) {
 				continue;
+			}
 			break;
 		case DSO__ORIG_FEDORA:
-			snprintf(name, size, "/usr/lib/debug%s.debug",
-				 self->long_name);
+			snprintf(name, size, "%s/usr/lib/debug%s.debug",
+				 symbol_conf.symfs, self->long_name);
 			break;
 		case DSO__ORIG_UBUNTU:
-			snprintf(name, size, "/usr/lib/debug%s",
-				 self->long_name);
+			snprintf(name, size, "%s/usr/lib/debug%s",
+				 symbol_conf.symfs, self->long_name);
 			break;
 		case DSO__ORIG_BUILDID: {
 			char build_id_hex[BUILD_ID_SIZE * 2 + 1];
@@ -1465,19 +1508,26 @@ int dso__load(struct dso *self, struct map *map, symbol_filter_t filter)
 					  sizeof(self->build_id),
 					  build_id_hex);
 			snprintf(name, size,
-				 "/usr/lib/debug/.build-id/%.2s/%s.debug",
-				 build_id_hex, build_id_hex + 2);
+				 "%s/usr/lib/debug/.build-id/%.2s/%s.debug",
+				 symbol_conf.symfs, build_id_hex, build_id_hex + 2);
 			}
 			break;
 		case DSO__ORIG_DSO:
-			snprintf(name, size, "%s", self->long_name);
+			snprintf(name, size, "%s%s",
+			     symbol_conf.symfs, self->long_name);
 			break;
 		case DSO__ORIG_GUEST_KMODULE:
 			if (map->groups && map->groups->machine)
 				root_dir = map->groups->machine->root_dir;
 			else
 				root_dir = "";
-			snprintf(name, size, "%s%s", root_dir, self->long_name);
+			snprintf(name, size, "%s%s%s", symbol_conf.symfs,
+				 root_dir, self->long_name);
+			break;
+
+		case DSO__ORIG_KMODULE:
+			snprintf(name, size, "%s%s", symbol_conf.symfs,
+				 self->long_name);
 			break;
 
 		default:
@@ -1772,21 +1822,24 @@ out_failure:
 	return -1;
 }
 
-static int dso__load_vmlinux(struct dso *self, struct map *map,
-			     const char *vmlinux, symbol_filter_t filter)
+int dso__load_vmlinux(struct dso *self, struct map *map,
+		      const char *vmlinux, symbol_filter_t filter)
 {
 	int err = -1, fd;
+	char symfs_vmlinux[PATH_MAX];
 
-	fd = open(vmlinux, O_RDONLY);
+	snprintf(symfs_vmlinux, sizeof(symfs_vmlinux), "%s/%s",
+		 symbol_conf.symfs, vmlinux);
+	fd = open(symfs_vmlinux, O_RDONLY);
 	if (fd < 0)
 		return -1;
 
 	dso__set_loaded(self, map->type);
-	err = dso__load_sym(self, map, vmlinux, fd, filter, 0, 0);
+	err = dso__load_sym(self, map, symfs_vmlinux, fd, filter, 0, 0);
 	close(fd);
 
 	if (err > 0)
-		pr_debug("Using %s for symbols\n", vmlinux);
+		pr_debug("Using %s for symbols\n", symfs_vmlinux);
 
 	return err;
 }
@@ -1828,8 +1881,8 @@ static int dso__load_kernel_sym(struct dso *self, struct map *map,
 	const char *kallsyms_filename = NULL;
 	char *kallsyms_allocated_filename = NULL;
 	/*
-	 * Step 1: if the user specified a vmlinux filename, use it and only
-	 * it, reporting errors to the user if it cannot be used.
+	 * Step 1: if the user specified a kallsyms or vmlinux filename, use
+	 * it and only it, reporting errors to the user if it cannot be used.
 	 *
 	 * For instance, try to analyse an ARM perf.data file _without_ a
 	 * build-id, or if the user specifies the wrong path to the right
@@ -1842,6 +1895,11 @@ static int dso__load_kernel_sym(struct dso *self, struct map *map,
 	 * validation in dso__load_vmlinux and will bail out if they don't
 	 * match.
 	 */
+	if (symbol_conf.kallsyms_name != NULL) {
+		kallsyms_filename = symbol_conf.kallsyms_name;
+		goto do_kallsyms;
+	}
+
 	if (symbol_conf.vmlinux_name != NULL) {
 		err = dso__load_vmlinux(self, map,
 					symbol_conf.vmlinux_name, filter);
@@ -1859,6 +1917,10 @@ static int dso__load_kernel_sym(struct dso *self, struct map *map,
 			goto out_fixup;
 	}
 
+	/* do not try local files if a symfs was given */
+	if (symbol_conf.symfs[0] != 0)
+		return -1;
+
 	/*
 	 * Say the kernel DSO was created when processing the build-id header table,
 	 * we have a build-id, so check if it is the same as the running kernel,
@@ -2123,14 +2185,55 @@ static struct dso *machine__create_kernel(struct machine *self)
 	return kernel;
 }
 
+struct process_args {
+	u64 start;
+};
+
+static int symbol__in_kernel(void *arg, const char *name,
+			     char type __used, u64 start, u64 end __used)
+{
+	struct process_args *args = arg;
+
+	if (strchr(name, '['))
+		return 0;
+
+	args->start = start;
+	return 1;
+}
+
+/* Figure out the start address of kernel map from /proc/kallsyms */
+static u64 machine__get_kernel_start_addr(struct machine *machine)
+{
+	const char *filename;
+	char path[PATH_MAX];
+	struct process_args args;
+
+	if (machine__is_host(machine)) {
+		filename = "/proc/kallsyms";
+	} else {
+		if (machine__is_default_guest(machine))
+			filename = (char *)symbol_conf.default_guest_kallsyms;
+		else {
+			sprintf(path, "%s/proc/kallsyms", machine->root_dir);
+			filename = path;
+		}
+	}
+
+	if (kallsyms__parse(filename, &args, symbol__in_kernel) <= 0)
+		return 0;
+
+	return args.start;
+}
+
 int __machine__create_kernel_maps(struct machine *self, struct dso *kernel)
 {
 	enum map_type type;
+	u64 start = machine__get_kernel_start_addr(self);
 
 	for (type = 0; type < MAP__NR_TYPES; ++type) {
 		struct kmap *kmap;
 
-		self->vmlinux_maps[type] = map__new2(0, kernel, type);
+		self->vmlinux_maps[type] = map__new2(start, kernel, type);
 		if (self->vmlinux_maps[type] == NULL)
 			return -1;
 
@@ -2208,9 +2311,6 @@ static int vmlinux_path__init(void)
 	struct utsname uts;
 	char bf[PATH_MAX];
 
-	if (uname(&uts) < 0)
-		return -1;
-
 	vmlinux_path = malloc(sizeof(char *) * 5);
 	if (vmlinux_path == NULL)
 		return -1;
@@ -2223,6 +2323,14 @@ static int vmlinux_path__init(void)
 	if (vmlinux_path[vmlinux_path__nr_entries] == NULL)
 		goto out_fail;
 	++vmlinux_path__nr_entries;
+
+	/* only try running kernel version if no symfs was given */
+	if (symbol_conf.symfs[0] != 0)
+		return 0;
+
+	if (uname(&uts) < 0)
+		return -1;
+
 	snprintf(bf, sizeof(bf), "/boot/vmlinux-%s", uts.release);
 	vmlinux_path[vmlinux_path__nr_entries] = strdup(bf);
 	if (vmlinux_path[vmlinux_path__nr_entries] == NULL)
@@ -2282,6 +2390,8 @@ static int setup_list(struct strlist **list, const char *list_str,
 
 int symbol__init(void)
 {
+	const char *symfs;
+
 	if (symbol_conf.initialized)
 		return 0;
 
@@ -2310,6 +2420,18 @@ int symbol__init(void)
 		       symbol_conf.sym_list_str, "symbol") < 0)
 		goto out_free_comm_list;
 
+	/*
+	 * A path to symbols of "/" is identical to ""
+	 * reset here for simplicity.
+	 */
+	symfs = realpath(symbol_conf.symfs, NULL);
+	if (symfs == NULL)
+		symfs = symbol_conf.symfs;
+	if (strcmp(symfs, "/") == 0)
+		symbol_conf.symfs = "";
+	if (symfs != symbol_conf.symfs)
+		free((void *)symfs);
+
 	symbol_conf.initialized = true;
 	return 0;
 
diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h
index 038f2201ee0..670cd1c88f5 100644
--- a/tools/perf/util/symbol.h
+++ b/tools/perf/util/symbol.h
@@ -72,6 +72,7 @@ struct symbol_conf {
 			show_cpu_utilization,
 			initialized;
 	const char	*vmlinux_name,
+			*kallsyms_name,
 			*source_prefix,
 			*field_sep;
 	const char	*default_guest_vmlinux_name,
@@ -85,6 +86,7 @@ struct symbol_conf {
        struct strlist	*dso_list,
 			*comm_list,
 			*sym_list;
+	const char	*symfs;
 };
 
 extern struct symbol_conf symbol_conf;
@@ -166,6 +168,8 @@ void dso__sort_by_name(struct dso *self, enum map_type type);
 struct dso *__dsos__findnew(struct list_head *head, const char *name);
 
 int dso__load(struct dso *self, struct map *map, symbol_filter_t filter);
+int dso__load_vmlinux(struct dso *self, struct map *map,
+		      const char *vmlinux, symbol_filter_t filter);
 int dso__load_vmlinux_path(struct dso *self, struct map *map,
 			   symbol_filter_t filter);
 int dso__load_kallsyms(struct dso *self, const char *filename, struct map *map,
@@ -213,7 +217,7 @@ bool __dsos__read_build_ids(struct list_head *head, bool with_hits);
 int build_id__sprintf(const u8 *self, int len, char *bf);
 int kallsyms__parse(const char *filename, void *arg,
 		    int (*process_symbol)(void *arg, const char *name,
-					  char type, u64 start));
+					  char type, u64 start, u64 end));
 
 void machine__destroy_kernel_maps(struct machine *self);
 int __machine__create_kernel_maps(struct machine *self, struct dso *kernel);
diff --git a/tools/perf/util/thread.c b/tools/perf/util/thread.c
index 8c72d888e44..00f4eade2e3 100644
--- a/tools/perf/util/thread.c
+++ b/tools/perf/util/thread.c
@@ -16,35 +16,50 @@ static int filter(const struct dirent *dir)
 		return 1;
 }
 
-int find_all_tid(int pid, pid_t ** all_tid)
+struct thread_map *thread_map__new_by_pid(pid_t pid)
 {
+	struct thread_map *threads;
 	char name[256];
 	int items;
 	struct dirent **namelist = NULL;
-	int ret = 0;
 	int i;
 
 	sprintf(name, "/proc/%d/task", pid);
 	items = scandir(name, &namelist, filter, NULL);
 	if (items <= 0)
-                return -ENOENT;
-	*all_tid = malloc(sizeof(pid_t) * items);
-	if (!*all_tid) {
-		ret = -ENOMEM;
-		goto failure;
-	}
-
-	for (i = 0; i < items; i++)
-		(*all_tid)[i] = atoi(namelist[i]->d_name);
+                return NULL;
 
-	ret = items;
+	threads = malloc(sizeof(*threads) + sizeof(pid_t) * items);
+	if (threads != NULL) {
+		for (i = 0; i < items; i++)
+			threads->map[i] = atoi(namelist[i]->d_name);
+		threads->nr = items;
+	}
 
-failure:
 	for (i=0; i<items; i++)
 		free(namelist[i]);
 	free(namelist);
 
-	return ret;
+	return threads;
+}
+
+struct thread_map *thread_map__new_by_tid(pid_t tid)
+{
+	struct thread_map *threads = malloc(sizeof(*threads) + sizeof(pid_t));
+
+	if (threads != NULL) {
+		threads->map[0] = tid;
+		threads->nr	= 1;
+	}
+
+	return threads;
+}
+
+struct thread_map *thread_map__new(pid_t pid, pid_t tid)
+{
+	if (pid != -1)
+		return thread_map__new_by_pid(pid);
+	return thread_map__new_by_tid(tid);
 }
 
 static struct thread *thread__new(pid_t pid)
diff --git a/tools/perf/util/thread.h b/tools/perf/util/thread.h
index 688500ff826..d7574101054 100644
--- a/tools/perf/util/thread.h
+++ b/tools/perf/util/thread.h
@@ -18,11 +18,24 @@ struct thread {
 	int			comm_len;
 };
 
+struct thread_map {
+	int nr;
+	int map[];
+};
+
 struct perf_session;
 
 void thread__delete(struct thread *self);
 
-int find_all_tid(int pid, pid_t ** all_tid);
+struct thread_map *thread_map__new_by_pid(pid_t pid);
+struct thread_map *thread_map__new_by_tid(pid_t tid);
+struct thread_map *thread_map__new(pid_t pid, pid_t tid);
+
+static inline void thread_map__delete(struct thread_map *threads)
+{
+	free(threads);
+}
+
 int thread__set_comm(struct thread *self, const char *comm);
 int thread__comm_len(struct thread *self);
 struct thread *perf_session__findnew(struct perf_session *self, pid_t pid);
diff --git a/tools/perf/util/trace-event-info.c b/tools/perf/util/trace-event-info.c
index b1572601286..35729f4c40c 100644
--- a/tools/perf/util/trace-event-info.c
+++ b/tools/perf/util/trace-event-info.c
@@ -34,11 +34,13 @@
 #include <ctype.h>
 #include <errno.h>
 #include <stdbool.h>
+#include <linux/list.h>
 #include <linux/kernel.h>
 
 #include "../perf.h"
 #include "trace-event.h"
 #include "debugfs.h"
+#include "evsel.h"
 
 #define VERSION "0.5"
 
@@ -469,16 +471,17 @@ out:
 }
 
 static struct tracepoint_path *
-get_tracepoints_path(struct perf_event_attr *pattrs, int nb_events)
+get_tracepoints_path(struct list_head *pattrs)
 {
 	struct tracepoint_path path, *ppath = &path;
-	int i, nr_tracepoints = 0;
+	struct perf_evsel *pos;
+	int nr_tracepoints = 0;
 
-	for (i = 0; i < nb_events; i++) {
-		if (pattrs[i].type != PERF_TYPE_TRACEPOINT)
+	list_for_each_entry(pos, pattrs, node) {
+		if (pos->attr.type != PERF_TYPE_TRACEPOINT)
 			continue;
 		++nr_tracepoints;
-		ppath->next = tracepoint_id_to_path(pattrs[i].config);
+		ppath->next = tracepoint_id_to_path(pos->attr.config);
 		if (!ppath->next)
 			die("%s\n", "No memory to alloc tracepoints list");
 		ppath = ppath->next;
@@ -487,21 +490,21 @@ get_tracepoints_path(struct perf_event_attr *pattrs, int nb_events)
 	return nr_tracepoints > 0 ? path.next : NULL;
 }
 
-bool have_tracepoints(struct perf_event_attr *pattrs, int nb_events)
+bool have_tracepoints(struct list_head *pattrs)
 {
-	int i;
+	struct perf_evsel *pos;
 
-	for (i = 0; i < nb_events; i++)
-		if (pattrs[i].type == PERF_TYPE_TRACEPOINT)
+	list_for_each_entry(pos, pattrs, node)
+		if (pos->attr.type == PERF_TYPE_TRACEPOINT)
 			return true;
 
 	return false;
 }
 
-int read_tracing_data(int fd, struct perf_event_attr *pattrs, int nb_events)
+int read_tracing_data(int fd, struct list_head *pattrs)
 {
 	char buf[BUFSIZ];
-	struct tracepoint_path *tps = get_tracepoints_path(pattrs, nb_events);
+	struct tracepoint_path *tps = get_tracepoints_path(pattrs);
 
 	/*
 	 * What? No tracepoints? No sense writing anything here, bail out.
@@ -545,14 +548,13 @@ int read_tracing_data(int fd, struct perf_event_attr *pattrs, int nb_events)
 	return 0;
 }
 
-ssize_t read_tracing_data_size(int fd, struct perf_event_attr *pattrs,
-			       int nb_events)
+ssize_t read_tracing_data_size(int fd, struct list_head *pattrs)
 {
 	ssize_t size;
 	int err = 0;
 
 	calc_data_size = 1;
-	err = read_tracing_data(fd, pattrs, nb_events);
+	err = read_tracing_data(fd, pattrs);
 	size = calc_data_size - 1;
 	calc_data_size = 0;
 
diff --git a/tools/perf/util/trace-event.h b/tools/perf/util/trace-event.h
index b3e86b1e444..b5f12ca24d9 100644
--- a/tools/perf/util/trace-event.h
+++ b/tools/perf/util/trace-event.h
@@ -262,9 +262,8 @@ raw_field_value(struct event *event, const char *name, void *data);
 void *raw_field_ptr(struct event *event, const char *name, void *data);
 unsigned long long eval_flag(const char *flag);
 
-int read_tracing_data(int fd, struct perf_event_attr *pattrs, int nb_events);
-ssize_t read_tracing_data_size(int fd, struct perf_event_attr *pattrs,
-			       int nb_events);
+int read_tracing_data(int fd, struct list_head *pattrs);
+ssize_t read_tracing_data_size(int fd, struct list_head *pattrs);
 
 /* taken from kernel/trace/trace.h */
 enum trace_flag_type {
diff --git a/tools/perf/util/ui/util.c b/tools/perf/util/ui/util.c
index 9706d9d4027..7b5a8926624 100644
--- a/tools/perf/util/ui/util.c
+++ b/tools/perf/util/ui/util.c
@@ -104,9 +104,24 @@ out_destroy_form:
 	return rc;
 }
 
+static const char yes[] = "Yes", no[] = "No",
+		  warning_str[] = "Warning!", ok[] = "Ok";
+
 bool ui__dialog_yesno(const char *msg)
 {
 	/* newtWinChoice should really be accepting const char pointers... */
-	char yes[] = "Yes", no[] = "No";
-	return newtWinChoice(NULL, yes, no, (char *)msg) == 1;
+	return newtWinChoice(NULL, (char *)yes, (char *)no, (char *)msg) == 1;
+}
+
+void ui__warning(const char *format, ...)
+{
+	va_list args;
+
+	va_start(args, format);
+	if (use_browser > 0)
+		newtWinMessagev((char *)warning_str, (char *)ok,
+				(char *)format, args);
+	else
+		vfprintf(stderr, format, args);
+	va_end(args);
 }
diff --git a/tools/perf/util/util.c b/tools/perf/util/util.c
index 214265674dd..5b3ea49aa63 100644
--- a/tools/perf/util/util.c
+++ b/tools/perf/util/util.c
@@ -114,3 +114,20 @@ unsigned long convert_unit(unsigned long value, char *unit)
 
 	return value;
 }
+
+int readn(int fd, void *buf, size_t n)
+{
+	void *buf_start = buf;
+
+	while (n) {
+		int ret = read(fd, buf, n);
+
+		if (ret <= 0)
+			return ret;
+
+		n -= ret;
+		buf += ret;
+	}
+
+	return buf - buf_start;
+}
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index 7562707ddd1..e833f26f3bf 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -265,6 +265,7 @@ void argv_free(char **argv);
 bool strglobmatch(const char *str, const char *pat);
 bool strlazymatch(const char *str, const char *pat);
 unsigned long convert_unit(unsigned long value, char *unit);
+int readn(int fd, void *buf, size_t size);
 
 #define _STR(x) #x
 #define STR(x) _STR(x)
diff --git a/tools/perf/util/xyarray.c b/tools/perf/util/xyarray.c
new file mode 100644
index 00000000000..22afbf6c536
--- /dev/null
+++ b/tools/perf/util/xyarray.c
@@ -0,0 +1,20 @@
+#include "xyarray.h"
+#include "util.h"
+
+struct xyarray *xyarray__new(int xlen, int ylen, size_t entry_size)
+{
+	size_t row_size = ylen * entry_size;
+	struct xyarray *xy = zalloc(sizeof(*xy) + xlen * row_size);
+
+	if (xy != NULL) {
+		xy->entry_size = entry_size;
+		xy->row_size   = row_size;
+	}
+
+	return xy;
+}
+
+void xyarray__delete(struct xyarray *xy)
+{
+	free(xy);
+}
diff --git a/tools/perf/util/xyarray.h b/tools/perf/util/xyarray.h
new file mode 100644
index 00000000000..c488a07275d
--- /dev/null
+++ b/tools/perf/util/xyarray.h
@@ -0,0 +1,20 @@
+#ifndef _PERF_XYARRAY_H_
+#define _PERF_XYARRAY_H_ 1
+
+#include <sys/types.h>
+
+struct xyarray {
+	size_t row_size;
+	size_t entry_size;
+	char contents[];
+};
+
+struct xyarray *xyarray__new(int xlen, int ylen, size_t entry_size);
+void xyarray__delete(struct xyarray *xy);
+
+static inline void *xyarray__entry(struct xyarray *xy, int x, int y)
+{
+	return &xy->contents[x * xy->row_size + y * xy->entry_size];
+}
+
+#endif /* _PERF_XYARRAY_H_ */
diff --git a/tools/virtio/Makefile b/tools/virtio/Makefile
new file mode 100644
index 00000000000..d1d442ed106
--- /dev/null
+++ b/tools/virtio/Makefile
@@ -0,0 +1,12 @@
+all: test mod
+test: virtio_test
+virtio_test: virtio_ring.o virtio_test.o
+CFLAGS += -g -O2 -Wall -I. -I ../../usr/include/ -Wno-pointer-sign -fno-strict-overflow  -MMD
+vpath %.c ../../drivers/virtio
+mod:
+	${MAKE} -C `pwd`/../.. M=`pwd`/vhost_test
+.PHONY: all test mod clean
+clean:
+	${RM} *.o vhost_test/*.o vhost_test/.*.cmd \
+              vhost_test/Module.symvers vhost_test/modules.order *.d
+-include *.d
diff --git a/tools/virtio/linux/device.h b/tools/virtio/linux/device.h
new file mode 100644
index 00000000000..4ad7e1df0db
--- /dev/null
+++ b/tools/virtio/linux/device.h
@@ -0,0 +1,2 @@
+#ifndef LINUX_DEVICE_H
+#endif
diff --git a/tools/virtio/linux/slab.h b/tools/virtio/linux/slab.h
new file mode 100644
index 00000000000..81baeac8ae4
--- /dev/null
+++ b/tools/virtio/linux/slab.h
@@ -0,0 +1,2 @@
+#ifndef LINUX_SLAB_H
+#endif
diff --git a/tools/virtio/linux/virtio.h b/tools/virtio/linux/virtio.h
new file mode 100644
index 00000000000..669bcdd4580
--- /dev/null
+++ b/tools/virtio/linux/virtio.h
@@ -0,0 +1,223 @@
+#ifndef LINUX_VIRTIO_H
+#define LINUX_VIRTIO_H
+
+#include <stdbool.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+
+#include <linux/types.h>
+#include <errno.h>
+
+typedef unsigned long long dma_addr_t;
+
+struct scatterlist {
+	unsigned long	page_link;
+	unsigned int	offset;
+	unsigned int	length;
+	dma_addr_t	dma_address;
+};
+
+struct page {
+	unsigned long long dummy;
+};
+
+#define BUG_ON(__BUG_ON_cond) assert(!(__BUG_ON_cond))
+
+/* Physical == Virtual */
+#define virt_to_phys(p) ((unsigned long)p)
+#define phys_to_virt(a) ((void *)(unsigned long)(a))
+/* Page address: Virtual / 4K */
+#define virt_to_page(p) ((struct page*)((virt_to_phys(p) / 4096) * \
+					sizeof(struct page)))
+#define offset_in_page(p) (((unsigned long)p) % 4096)
+#define sg_phys(sg) ((sg->page_link & ~0x3) / sizeof(struct page) * 4096 + \
+		     sg->offset)
+static inline void sg_mark_end(struct scatterlist *sg)
+{
+	/*
+	 * Set termination bit, clear potential chain bit
+	 */
+	sg->page_link |= 0x02;
+	sg->page_link &= ~0x01;
+}
+static inline void sg_init_table(struct scatterlist *sgl, unsigned int nents)
+{
+	memset(sgl, 0, sizeof(*sgl) * nents);
+	sg_mark_end(&sgl[nents - 1]);
+}
+static inline void sg_assign_page(struct scatterlist *sg, struct page *page)
+{
+	unsigned long page_link = sg->page_link & 0x3;
+
+	/*
+	 * In order for the low bit stealing approach to work, pages
+	 * must be aligned at a 32-bit boundary as a minimum.
+	 */
+	BUG_ON((unsigned long) page & 0x03);
+	sg->page_link = page_link | (unsigned long) page;
+}
+
+static inline void sg_set_page(struct scatterlist *sg, struct page *page,
+			       unsigned int len, unsigned int offset)
+{
+	sg_assign_page(sg, page);
+	sg->offset = offset;
+	sg->length = len;
+}
+
+static inline void sg_set_buf(struct scatterlist *sg, const void *buf,
+			      unsigned int buflen)
+{
+	sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf));
+}
+
+static inline void sg_init_one(struct scatterlist *sg, const void *buf, unsigned int buflen)
+{
+	sg_init_table(sg, 1);
+	sg_set_buf(sg, buf, buflen);
+}
+
+typedef __u16 u16;
+
+typedef enum {
+	GFP_KERNEL,
+	GFP_ATOMIC,
+} gfp_t;
+typedef enum {
+	IRQ_NONE,
+	IRQ_HANDLED
+} irqreturn_t;
+
+static inline void *kmalloc(size_t s, gfp_t gfp)
+{
+	return malloc(s);
+}
+
+static inline void kfree(void *p)
+{
+	free(p);
+}
+
+#define container_of(ptr, type, member) ({			\
+	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
+	(type *)( (char *)__mptr - offsetof(type,member) );})
+
+#define uninitialized_var(x) x = x
+
+# ifndef likely
+#  define likely(x)	(__builtin_expect(!!(x), 1))
+# endif
+# ifndef unlikely
+#  define unlikely(x)	(__builtin_expect(!!(x), 0))
+# endif
+
+#define pr_err(format, ...) fprintf (stderr, format, ## __VA_ARGS__)
+#ifdef DEBUG
+#define pr_debug(format, ...) fprintf (stderr, format, ## __VA_ARGS__)
+#else
+#define pr_debug(format, ...) do {} while (0)
+#endif
+#define dev_err(dev, format, ...) fprintf (stderr, format, ## __VA_ARGS__)
+#define dev_warn(dev, format, ...) fprintf (stderr, format, ## __VA_ARGS__)
+
+/* TODO: empty stubs for now. Broken but enough for virtio_ring.c */
+#define list_add_tail(a, b) do {} while (0)
+#define list_del(a) do {} while (0)
+
+#define BIT_WORD(nr)		((nr) / BITS_PER_LONG)
+#define BITS_PER_BYTE		8
+#define BITS_PER_LONG (sizeof(long) * BITS_PER_BYTE)
+#define BIT_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
+/* TODO: Not atomic as it should be:
+ * we don't use this for anything important. */
+static inline void clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long mask = BIT_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+
+	*p &= ~mask;
+}
+
+static inline int test_bit(int nr, const volatile unsigned long *addr)
+{
+        return 1UL & (addr[BIT_WORD(nr)] >> (nr & (BITS_PER_LONG-1)));
+}
+
+/* The only feature we care to support */
+#define virtio_has_feature(dev, feature) \
+	test_bit((feature), (dev)->features)
+/* end of stubs */
+
+struct virtio_device {
+	void *dev;
+	unsigned long features[1];
+};
+
+struct virtqueue {
+	/* TODO: commented as list macros are empty stubs for now.
+	 * Broken but enough for virtio_ring.c
+	 * struct list_head list; */
+	void (*callback)(struct virtqueue *vq);
+	const char *name;
+	struct virtio_device *vdev;
+	void *priv;
+};
+
+#define EXPORT_SYMBOL_GPL(__EXPORT_SYMBOL_GPL_name) \
+	void __EXPORT_SYMBOL_GPL##__EXPORT_SYMBOL_GPL_name() { \
+}
+#define MODULE_LICENSE(__MODULE_LICENSE_value) \
+	const char *__MODULE_LICENSE_name = __MODULE_LICENSE_value
+
+#define CONFIG_SMP
+
+#if defined(__i386__) || defined(__x86_64__)
+#define barrier() asm volatile("" ::: "memory")
+#define mb() __sync_synchronize()
+
+#define smp_mb()	mb()
+# define smp_rmb()	barrier()
+# define smp_wmb()	barrier()
+#else
+#error Please fill in barrier macros
+#endif
+
+/* Interfaces exported by virtio_ring. */
+int virtqueue_add_buf_gfp(struct virtqueue *vq,
+			  struct scatterlist sg[],
+			  unsigned int out_num,
+			  unsigned int in_num,
+			  void *data,
+			  gfp_t gfp);
+
+static inline int virtqueue_add_buf(struct virtqueue *vq,
+				    struct scatterlist sg[],
+				    unsigned int out_num,
+				    unsigned int in_num,
+				    void *data)
+{
+	return virtqueue_add_buf_gfp(vq, sg, out_num, in_num, data, GFP_ATOMIC);
+}
+
+void virtqueue_kick(struct virtqueue *vq);
+
+void *virtqueue_get_buf(struct virtqueue *vq, unsigned int *len);
+
+void virtqueue_disable_cb(struct virtqueue *vq);
+
+bool virtqueue_enable_cb(struct virtqueue *vq);
+
+void *virtqueue_detach_unused_buf(struct virtqueue *vq);
+struct virtqueue *vring_new_virtqueue(unsigned int num,
+				      unsigned int vring_align,
+				      struct virtio_device *vdev,
+				      void *pages,
+				      void (*notify)(struct virtqueue *vq),
+				      void (*callback)(struct virtqueue *vq),
+				      const char *name);
+void vring_del_virtqueue(struct virtqueue *vq);
+
+#endif
diff --git a/tools/virtio/vhost_test/Makefile b/tools/virtio/vhost_test/Makefile
new file mode 100644
index 00000000000..a1d35b81b31
--- /dev/null
+++ b/tools/virtio/vhost_test/Makefile
@@ -0,0 +1,2 @@
+obj-m += vhost_test.o
+EXTRA_CFLAGS += -Idrivers/vhost
diff --git a/tools/virtio/vhost_test/vhost_test.c b/tools/virtio/vhost_test/vhost_test.c
new file mode 100644
index 00000000000..18735189e62
--- /dev/null
+++ b/tools/virtio/vhost_test/vhost_test.c
@@ -0,0 +1 @@
+#include "test.c"
diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c
new file mode 100644
index 00000000000..df0c6d2c386
--- /dev/null
+++ b/tools/virtio/virtio_test.c
@@ -0,0 +1,248 @@
+#define _GNU_SOURCE
+#include <getopt.h>
+#include <string.h>
+#include <poll.h>
+#include <sys/eventfd.h>
+#include <stdlib.h>
+#include <assert.h>
+#include <unistd.h>
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <linux/vhost.h>
+#include <linux/virtio.h>
+#include <linux/virtio_ring.h>
+#include "../../drivers/vhost/test.h"
+
+struct vq_info {
+	int kick;
+	int call;
+	int num;
+	int idx;
+	void *ring;
+	/* copy used for control */
+	struct vring vring;
+	struct virtqueue *vq;
+};
+
+struct vdev_info {
+	struct virtio_device vdev;
+	int control;
+	struct pollfd fds[1];
+	struct vq_info vqs[1];
+	int nvqs;
+	void *buf;
+	size_t buf_size;
+	struct vhost_memory *mem;
+};
+
+void vq_notify(struct virtqueue *vq)
+{
+	struct vq_info *info = vq->priv;
+	unsigned long long v = 1;
+	int r;
+	r = write(info->kick, &v, sizeof v);
+	assert(r == sizeof v);
+}
+
+void vq_callback(struct virtqueue *vq)
+{
+}
+
+
+void vhost_vq_setup(struct vdev_info *dev, struct vq_info *info)
+{
+	struct vhost_vring_state state = { .index = info->idx };
+	struct vhost_vring_file file = { .index = info->idx };
+	unsigned long long features = dev->vdev.features[0];
+	struct vhost_vring_addr addr = {
+		.index = info->idx,
+		.desc_user_addr = (uint64_t)(unsigned long)info->vring.desc,
+		.avail_user_addr = (uint64_t)(unsigned long)info->vring.avail,
+		.used_user_addr = (uint64_t)(unsigned long)info->vring.used,
+	};
+	int r;
+	r = ioctl(dev->control, VHOST_SET_FEATURES, &features);
+	assert(r >= 0);
+	state.num = info->vring.num;
+	r = ioctl(dev->control, VHOST_SET_VRING_NUM, &state);
+	assert(r >= 0);
+	state.num = 0;
+	r = ioctl(dev->control, VHOST_SET_VRING_BASE, &state);
+	assert(r >= 0);
+	r = ioctl(dev->control, VHOST_SET_VRING_ADDR, &addr);
+	assert(r >= 0);
+	file.fd = info->kick;
+	r = ioctl(dev->control, VHOST_SET_VRING_KICK, &file);
+	assert(r >= 0);
+	file.fd = info->call;
+	r = ioctl(dev->control, VHOST_SET_VRING_CALL, &file);
+	assert(r >= 0);
+}
+
+static void vq_info_add(struct vdev_info *dev, int num)
+{
+	struct vq_info *info = &dev->vqs[dev->nvqs];
+	int r;
+	info->idx = dev->nvqs;
+	info->kick = eventfd(0, EFD_NONBLOCK);
+	info->call = eventfd(0, EFD_NONBLOCK);
+	r = posix_memalign(&info->ring, 4096, vring_size(num, 4096));
+	assert(r >= 0);
+	memset(info->ring, 0, vring_size(num, 4096));
+	vring_init(&info->vring, num, info->ring, 4096);
+	info->vq = vring_new_virtqueue(info->vring.num, 4096, &dev->vdev, info->ring,
+				       vq_notify, vq_callback, "test");
+	assert(info->vq);
+	info->vq->priv = info;
+	vhost_vq_setup(dev, info);
+	dev->fds[info->idx].fd = info->call;
+	dev->fds[info->idx].events = POLLIN;
+	dev->nvqs++;
+}
+
+static void vdev_info_init(struct vdev_info* dev, unsigned long long features)
+{
+	int r;
+	memset(dev, 0, sizeof *dev);
+	dev->vdev.features[0] = features;
+	dev->vdev.features[1] = features >> 32;
+	dev->buf_size = 1024;
+	dev->buf = malloc(dev->buf_size);
+	assert(dev->buf);
+        dev->control = open("/dev/vhost-test", O_RDWR);
+	assert(dev->control >= 0);
+	r = ioctl(dev->control, VHOST_SET_OWNER, NULL);
+	assert(r >= 0);
+	dev->mem = malloc(offsetof(struct vhost_memory, regions) +
+			  sizeof dev->mem->regions[0]);
+	assert(dev->mem);
+	memset(dev->mem, 0, offsetof(struct vhost_memory, regions) +
+                          sizeof dev->mem->regions[0]);
+	dev->mem->nregions = 1;
+	dev->mem->regions[0].guest_phys_addr = (long)dev->buf;
+	dev->mem->regions[0].userspace_addr = (long)dev->buf;
+	dev->mem->regions[0].memory_size = dev->buf_size;
+	r = ioctl(dev->control, VHOST_SET_MEM_TABLE, dev->mem);
+	assert(r >= 0);
+}
+
+/* TODO: this is pretty bad: we get a cache line bounce
+ * for the wait queue on poll and another one on read,
+ * plus the read which is there just to clear the
+ * current state. */
+static void wait_for_interrupt(struct vdev_info *dev)
+{
+	int i;
+	unsigned long long val;
+	poll(dev->fds, dev->nvqs, -1);
+	for (i = 0; i < dev->nvqs; ++i)
+		if (dev->fds[i].revents & POLLIN) {
+			read(dev->fds[i].fd, &val, sizeof val);
+		}
+}
+
+static void run_test(struct vdev_info *dev, struct vq_info *vq, int bufs)
+{
+	struct scatterlist sl;
+	long started = 0, completed = 0;
+	long completed_before;
+	int r, test = 1;
+	unsigned len;
+	long long spurious = 0;
+	r = ioctl(dev->control, VHOST_TEST_RUN, &test);
+	assert(r >= 0);
+	for (;;) {
+		virtqueue_disable_cb(vq->vq);
+		completed_before = completed;
+		do {
+			if (started < bufs) {
+				sg_init_one(&sl, dev->buf, dev->buf_size);
+				r = virtqueue_add_buf(vq->vq, &sl, 1, 0,
+						      dev->buf + started);
+				if (likely(r >= 0)) {
+					++started;
+					virtqueue_kick(vq->vq);
+				}
+			} else
+				r = -1;
+
+			/* Flush out completed bufs if any */
+			if (virtqueue_get_buf(vq->vq, &len)) {
+				++completed;
+				r = 0;
+			}
+
+		} while (r >= 0);
+		if (completed == completed_before)
+			++spurious;
+		assert(completed <= bufs);
+		assert(started <= bufs);
+		if (completed == bufs)
+			break;
+		if (virtqueue_enable_cb(vq->vq)) {
+			wait_for_interrupt(dev);
+		}
+	}
+	test = 0;
+	r = ioctl(dev->control, VHOST_TEST_RUN, &test);
+	assert(r >= 0);
+	fprintf(stderr, "spurious wakeus: 0x%llx\n", spurious);
+}
+
+const char optstring[] = "h";
+const struct option longopts[] = {
+	{
+		.name = "help",
+		.val = 'h',
+	},
+	{
+		.name = "indirect",
+		.val = 'I',
+	},
+	{
+		.name = "no-indirect",
+		.val = 'i',
+	},
+	{
+	}
+};
+
+static void help()
+{
+	fprintf(stderr, "Usage: virtio_test [--help] [--no-indirect]\n");
+}
+
+int main(int argc, char **argv)
+{
+	struct vdev_info dev;
+	unsigned long long features = 1ULL << VIRTIO_RING_F_INDIRECT_DESC;
+	int o;
+
+	for (;;) {
+		o = getopt_long(argc, argv, optstring, longopts, NULL);
+		switch (o) {
+		case -1:
+			goto done;
+		case '?':
+			help();
+			exit(2);
+		case 'h':
+			help();
+			goto done;
+		case 'i':
+			features &= ~(1ULL << VIRTIO_RING_F_INDIRECT_DESC);
+			break;
+		default:
+			assert(0);
+			break;
+		}
+	}
+
+done:
+	vdev_info_init(&dev, features);
+	vq_info_add(&dev, 256);
+	run_test(&dev, &dev.vqs[0], 0x100000);
+	return 0;
+}
diff --git a/usr/initramfs_data.S b/usr/initramfs_data.S
index 792a750d944..c14322d1c0c 100644
--- a/usr/initramfs_data.S
+++ b/usr/initramfs_data.S
@@ -22,14 +22,15 @@
 */
 
 #include <linux/stringify.h>
+#include <asm-generic/vmlinux.lds.h>
 
 .section .init.ramfs,"a"
 __irf_start:
 .incbin __stringify(INITRAMFS_IMAGE)
 __irf_end:
 .section .init.ramfs.info,"a"
-.globl __initramfs_size
-__initramfs_size:
+.globl VMLINUX_SYMBOL(__initramfs_size)
+VMLINUX_SYMBOL(__initramfs_size):
 #ifdef CONFIG_64BIT
 	.quad __irf_end - __irf_start
 #else